National Library of Energy BETA

Sample records for korean norwegian romanian

  1. Norwegian petroleum guide

    SciTech Connect (OSTI)

    Christie, H.B.

    1984-01-01

    This is about the comprehensive guide to Norwegian oil and gas activities, very useful to anyone in the industry. Material includes political guidelines, control institutions, work possibilities and licenses, working environment law, employer and employee organizations, national insurance, taxes, communication, rescue operations and standby. Contents: Oil and the economy; Petroleum technology research; Responsibilities of different authorities; The Labour Inspection Directorate; The Health Directorate Offshore Office; The Coastal Directorate; Helicopter traffic; The Norwegian Petroleum Directorate; The Maritime Directorate; Det norske Veritas; The Norwegian Waterways and Electricity Board; The State Institute for Radiation Hygiene; The State Explosive Inspection; Work possibilities in the North Sea; Working environment legislation on the Continental Shelf; Collective bargaining agreements, labor conflicts and the right to organize; Taxation Rules; National health insurance and the petroleum activity; Occupational injuries on the Norwegian Continental Shelf; Company insurances; The private pension scheme; Other types of insuracne common among oil companies; The rescue service in Norway; Oganizations within the oil industry offshore and onshore; and Law of aliens admission to the Kindgom.

  2. Daniel Beat Mller, Norwegian University of Science and Technology...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Daniel Beat Mller, Norwegian University of Science and Technology, Material Flow Analysis Daniel Beat Mller, Norwegian University of Science and Technology, Material Flow...

  3. Korean Automotive Research Instituiton | Open Energy Information

    Open Energy Info (EERE)

    Korean Automotive Research Instituiton Jump to: navigation, search Name: Korean Automotive Research Instituiton Place: Korea Information About Partnership with NREL Partnership...

  4. Norwegian University of Science and Technology CONWEC AS | Open...

    Open Energy Info (EERE)

    University of Science and Technology CONWEC AS Jump to: navigation, search Name: Norwegian University of Science and Technology CONWEC AS Address: Department of Physics...

  5. Approaches and Financial Models for Scaling up Norwegian Development...

    Open Energy Info (EERE)

    Approaches and Financial Models for Scaling up Norwegian Development Assistance to Clean Energy Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Approaches and Financial...

  6. Norwegian Agency for Development Cooperation (Norad) | Open Energy...

    Open Energy Info (EERE)

    provided through Norwegian and international partners contributes effectively to poverty reduction These goals will be achieved on the foundation of Norad's current...

  7. ARM - Field Campaign - MPL Measurements, Norwegian Young sea...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    would love to hear from you Send us a note below or call us at 1-888-ARM-DATA. Send Campaign : MPL Measurements, Norwegian Young sea ICE cruise 2014.10.01 - 2015.07.09 Lead...

  8. Norwegian Young Sea Ice Experiment (N-ICE) Field Campaign Report...

    Office of Scientific and Technical Information (OSTI)

    Norwegian Young Sea Ice Experiment (N-ICE) Field Campaign Report Citation Details In-Document Search Title: Norwegian Young Sea Ice Experiment (N-ICE) Field Campaign Report The ...

  9. Norwegian Young Sea Ice Experiment (N-ICE) Field Campaign Report (Technical

    Office of Scientific and Technical Information (OSTI)

    Report) | SciTech Connect Norwegian Young Sea Ice Experiment (N-ICE) Field Campaign Report Citation Details In-Document Search Title: Norwegian Young Sea Ice Experiment (N-ICE) Field Campaign Report The Norwegian Young Sea Ice (N-ICE) experiment was conducted aboard the R/V Lance research vessel from January through June 2015. The primary purpose of the experiment was to better understand thin, first-year sea ice. This includes understanding of how different components of the Arctic system

  10. Power Air H Plus Korean Back up Power System JV | Open Energy...

    Open Energy Info (EERE)

    Plus Korean Back up Power System JV Jump to: navigation, search Name: Power AirH-Plus Korean Back-up Power System JV Place: Korea (Republic) Product: Power Air signed a MOU with...

  11. Inter-Korean military confidence building after 2003.

    SciTech Connect (OSTI)

    Tae-woo, Kim (Korea Institute for Defense Analyses, Seoul, Republic of Korea); Littlefield, Adriane C.; Vannoni, Michael Geoffrey; Sang-beom, Kim (Korea Institute for Defense Analyses, Seoul, Republic of Korea); Koelm, Jennifer Gay; Olsen, John Norman; Myong-jin, Kim (Korea Institute for Defense Analyses, Seoul, Republic of Korea); Sung-tack, Shin (Korea Institute for Defense Analyses, Seoul, Republic of Korea)

    2003-08-01

    Tensions on the Korean Peninsula remain high despite a long-term strategy by South Korea to increase inter-Korean exchanges in economics, culture, sports, and other topics. This is because the process of reconciliation has rarely extended to military and security topics and those initiatives that were negotiated have been ineffective. Bilateral interactions must include actions to reduce threats and improve confidence associated with conventional military forces (land, sea, and air) as well as nuclear, chemical, and biological activities that are applicable to developing and producing weapons of mass destruction (WMD). The purpose of this project is to develop concepts for inter-Korean confidence building measures (CBMs) for military and WMD topics that South Korea could propose to the North when conditions are right. This report describes the historical and policy context for developing security-related CBMs and presents an array of bilateral options for conventional military and WMD topics within a consistent framework. The conceptual CBMs address two scenarios: (1) improved relations where construction of a peace regime becomes a full agenda item in inter-Korean dialogue, and (2) continued tense inter-Korean relations. Some measures could be proposed in the short term under current conditions, others might be implemented in a series of steps, while some require a higher level of cooperation than currently exists. To support decision making by political leaders, this research focuses on strategies and policy options and does not include technical details.

  12. Norwegian Young Sea Ice Experiment (N-ICE) Field Campaign Report

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8 Norwegian Young Sea Ice Experiment (N-ICE) Field Campaign Report VP Walden SR Hudson L Cohen , March 2016 DISCLAIMER This report was prepared as an account of work sponsored by the U.S. Government. Neither the United States nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its

  13. Romanian Experience for Enhancing Safety and Security in Transport of Radioactive Material - 12223

    SciTech Connect (OSTI)

    Vieru, Gheorghe

    2012-07-01

    The transport of Dangerous Goods-Class no.7 Radioactive Material (RAM), is an important part of the Romanian Radioactive Material Management. The overall aim of this activity is for enhancing operational safety and security measures during the transport of the radioactive materials, in order to ensure the protection of the people and the environment. The paper will present an overall of the safety and security measures recommended and implemented during transportation of RAM in Romania. Some aspects on the potential threat environment will be also approached with special referring to the low level radioactive material (waste) and NORM transportation either by road or by rail. A special attention is given to the assessment and evaluation of the possible radiological consequences due to RAM transportation. The paper is a part of the IAEA's Vienna Scientific Research Contract on the State Management of Nuclear Security Regime (Framework) concluded with the Institute for Nuclear Research, Romania, where the author is the CSI (Chief Scientific Investigator). The transport of RAM in Romania is a very sensible and complex problem taking into consideration the importance and the need of the security and safety for such activities. The Romanian Nuclear Regulatory Body set up strictly regulation and procedures according to the Recommendation of the IAEA Vienna and other international organizations. There were implemented the adequate regulation and procedures in order to keep the environmental impacts and the radiological consequences at the lower possible level and to assure the effectiveness of state nuclear security regime due to possible malicious acts in carrying out these activities including transport and the disposal site at the acceptable international levels. The levels of the estimated doses and risk expectation values for transport and disposal are within the acceptable limits provided by national and international regulations and recommendations but can increase, significantly during potential malicious acts. (authors)

  14. The application of cooperative monitoring techniques to a conceptual limited deployment zone in the Korean peninsula

    SciTech Connect (OSTI)

    Vannoni, M.; Duggan, R.

    1996-10-01

    The Korean peninsula is the site of a tense military confrontation. Relations between North and South Korea improved during the early 1990`s but the process is now frozen. Confidence building measures, particularly military ones, that address the security needs of both countries would decrease the danger of conflict and help create an environment for direct negotiations. The Korean Institute for Defense Analysis (KIDA) analyzed current security conditions and options. Their scenario includes a conceptual agreement to establish Limited Force Deployment Zones (LDZ) along the current demilitarized zone (DMZ) to increase mutual security. The Cooperative Monitoring Center (CMC) of Sandia National Laboratories, in collaboration with KIDA, developed a strategy, with examples, for cooperatively monitoring the agreement. A cooperative monitoring regime requires consideration of the agreement`s terms, the geographic, logistic, military, and political factors of the Korean environment, and the capability of technology to monitor the terms. This paper assesses the applicability of cooperative monitoring to Korea, describes the monitoring strategy for the Korean enhanced DMZ scenario, and describes the applicable technologies and procedures.

  15. Confidence building on the Korean Peninsula: A conceptual development for the cooperative monitoring of limited-force deployment zones

    SciTech Connect (OSTI)

    Vannoni, M.; Duggan, R.; Nam, M.K.; Moon, K.K.; Kim, M.J.

    1997-04-01

    Confidence building measures (CBMs), particularly military ones, that address the security needs of North and South Korea could decrease the risk of conflict on the Korean Peninsula and help create an environment in which to negotiate a peace regime. The Korea Institute for Defense Analyses (KIDA) and the Cooperative Monitoring Center (CMC) of Sandia National Laboratories collaborated to identify potential CBMs and define associated monitoring. The project is a conceptual analysis of political and technical options for confidence building that might be feasible in Korea at some future time. KIDA first analyzed current security conditions and options for CBMs. Their conclusions are presented as a hypothetical agreement to strengthen the Armistice Agreement by establishing Limited Force Deployment Zones along the Military Demarcation Line. The goal of the hypothetical agreement is to increase mutual security and build confidence. The CMC then used KIDA`s scenario to develop a strategy for cooperative monitoring the agreement. Cooperative monitoring is the collecting, analyzing and sharing of agreed information among parties to an agreement and typically relies on the use of commercially available technology. A cooperative monitoring regime must be consistent with the agreement`s terms; the geographic, logistic, military, and political factors in the Korean setting; and the capabilities of monitoring technologies. This report describes the security situation on the Korean peninsula, relevant precedents from other regions, the hypothetical agreement for reducing military tensions, a monitoring strategy for the hypothetical Korean agreement, examples of implementation, and a description of applicable monitoring technologies and procedures.

  16. The Surface Wave Magnitude for the 9 October 2006 North Korean Nuclear Explosion

    SciTech Connect (OSTI)

    Bonner, J; Herrmann, R; Harkrider, D; Pasyanos, M

    2008-03-11

    Surface waves were generated by the North Korean nuclear explosion of 9 October 2006 and recorded at epicentral distances up to 34 degrees, from which we estimated a surface wave magnitude (M{sub s}) of 2.94 with an interstation standard deviation of 0.17 magnitude units. The International Data Centre estimated a body wave magnitude (m{sub b}) of 4.1. This is the only explosion we have analyzed that was not easily screened as an explosion based on the differences between the M{sub s} and m{sub b} estimates. Additionally, this M{sub s} predicts a yield, based on empirical M{sub s}/Yield relationships, that is almost an order of magnitude larger then the 0.5 to 1 kiloton reported for this explosion. We investigate how emplacement medium effects on surface wave moment and magnitude may have contributed to the yield discrepancy.

  17. Regulatory Concerns on the In-Containment Water Storage System of the Korean Next Generation Reactor

    SciTech Connect (OSTI)

    Ahn, Hyung-Joon; Lee, Jae-Hun; Bang, Young-Seok; Kim, Hho-Jung

    2002-07-15

    The in-containment water storage system (IWSS) is a newly adopted system in the design of the Korean Next Generation Reactor (KNGR). It consists of the in-containment refueling water storage tank, holdup volume tank, and cavity flooding system (CFS). The IWSS has the function of steam condensation and heat sink for the steam release from the pressurizer and provides cooling water to the safety injection system and containment spray system in an accident condition and to the CFS in a severe accident condition. With the progress of the KNGR design, the Korea Institute of Nuclear Safety has been developing Safety and Regulatory Requirements and Guidances for safety review of the KNGR. In this paper, regarding the IWSS of the KNGR, the major contents of the General Safety Criteria, Specific Safety Requirements, Safety Regulatory Guides, and Safety Review Procedures were introduced, and the safety review items that have to be reviewed in-depth from the regulatory viewpoint were also identified.

  18. Periodic Verification of the Scaling Factor for Radwastes in Korean NPPs - 13294

    SciTech Connect (OSTI)

    Park, Yong Joon; Ahn, Hong Joo; Song, Byoung Chul; Song, Kyuseok

    2013-07-01

    According to the acceptance criteria for a low and intermediate level radioactive waste (LILW) listed in Notice No. 2012-53 of the Nuclear Safety and Security Commission (NSSC), specific concentrations of radionuclides inside a drum has to be identified and quantified. In 5 years of effort, scaling factors were derived through destructive radiochemical analysis, and the dry active waste, spent resin, concentration bottom, spent filter, and sludge drums generated during 2004 ? 2008 were evaluated to identify radionuclide inventories. Eventually, only dry active waste among LILWs generated from Korean NPPs were first shipped to a permanent disposal facility on December 2010. For the LILWs generated after 2009, the radionuclides are being radiochemically quantified because the Notice clarifies that the certifications of the scaling factors should be verified biennially. During the operation of NPP, the radionuclides designated in the Notice are formed by neutron activation of primary coolant, reactor structural materials, corrosion products, and fission products released into primary coolant through defects or failures in fuel cladding. Eventually, since the radionuclides released into primary coolant are transported into the numerous auxiliary and support systems connected to primary system, the LILWs can be contaminated, and the radionuclides can have various concentration distributions. Thus, radioactive wastes, such as spent resin and dry active waste generated at various Korean NPP sites, were sampled at each site, and the activities of the regulated radionuclides present in the sample were determined using radiochemical methods. The scaling factors were driven on the basis of the activity ratios between a or ?-emitting nuclides and ?-emitting nuclides. The resulting concentrations were directly compared with the established scaling factors' data using statistical methods. In conclusions, the established scaling factors were verified with a reliability of within 2?, and the scaling factors will be applied for newly analyzed LILWs to evaluate the radionuclide inventories. (authors)

  19. The effects of UCP-1 polymorphisms on obesity phenotypes among Korean female subjects

    SciTech Connect (OSTI)

    Shin, Hyoung Doo; Kim, Kil Soo; Cha, Min Ho; Yoon, Yoosik . E-mail: ysyoon66@naver.com

    2005-09-23

    Three SNPs of UCP-1 including A-3826G, A-1766G, and Ala64Thr (G+1068A) were genotyped among 453 overweight Korean female subjects recruited from an obesity clinic. Four common haplotypes with frequency greater than 0.04 were constructed with three SNPs. For an accurate evaluation of the effects of UCP-1 polymorphism on body fat accumulation, all subjects were tested using computerized tomography to measure the cross-sectional fat tissue areas at abdominal and distal part of the body. By statistical analyses, ht4[GAA] showed a significant association with decreased abdominal fat tissue area (P = 0.02, dominant model), fat tissue area at thigh (P = 0.008, dominant model), body fat mass (P = 0.002, dominant model), and waist-to-hip ratio (P = 0.01, dominant model). In addition, ht3[GAG] was associated with the accelerated reduction of waist-to-hip ratio and body fat mass by very low calorie diet among subjects who finished one-month-weight control program (P = 0.05-0.006)

  20. Chinese attitudes toward nuclear weapons: China and the United States during the Korean War

    SciTech Connect (OSTI)

    Ryan, M.A.

    1986-01-01

    Fundamental Chinese attitudes related to nuclear disarmament and proliferation, civil defense against nuclear attack, and the likely repercussions of nuclear war were set during the Korean War. Chinese viewpoints were heavily influenced by Western writings on nuclear matters from 1945-1950 and were characterized by an integrated military, political, and psychological realism. Previous studies, failing to make use of relevant Chinese-language materials, have neglected this crucial formative period. Both the Truman and Eisenhower administrations considered using nuclear weapons in Korea and China and attempted to shape the political settlement of the war through nuclear threats. The Chinese reaction was notable for its efforts to counteract the effects of fear among its population. They acknowledged the unprecedented destructiveness, not the military decisiveness, of the weapons, but they adamantly denied that nuclear threats would cow them. Chinese propaganda stressed the Soviet deterrent and skillfully appealed to worldwide opposition to nuclear weapons, often utilizing Western spokesmen and playing upon the theme of US misuse of science. The Chinese considered a nuclear attack relatively unlikely but were prepared to absorb an attack and fight a war of long duration. In Korea both the terrain and the extensive tunneling by Chinese troops afforded significant protection from nuclear weapons.

  1. Associations of blood lead, cadmium, and mercury with estimated glomerular filtration rate in the Korean general population: Analysis of 2008-2010 Korean National Health and Nutrition Examination Survey data

    SciTech Connect (OSTI)

    Kim, Yangho; Lee, Byung-Kook

    2012-10-15

    Introduction: The objective of this study was to evaluate associations between blood lead, cadmium, and mercury levels with estimated glomerular filtration rate in a general population of South Korean adults. Methods: This was a cross-sectional study based on data obtained in the Korean National Health and Nutrition Examination Survey (KNHANES) (2008-2010). The final analytical sample consisted of 5924 participants. Estimated glomerular filtration rate (eGFR) was calculated using the MDRD Study equation as an indicator of glomerular function. Results: In multiple linear regression analysis of log2-transformed blood lead as a continuous variable on eGFR, after adjusting for covariates including cadmium and mercury, the difference in eGFR levels associated with doubling of blood lead were -2.624 mL/min per 1.73 m Superscript-Two (95% CI: -3.803 to -1.445). In multiple linear regression analysis using quartiles of blood lead as the independent variable, the difference in eGFR levels comparing participants in the highest versus the lowest quartiles of blood lead was -3.835 mL/min per 1.73 m Superscript-Two (95% CI: -5.730 to -1.939). In a multiple linear regression analysis using blood cadmium and mercury, as continuous or categorical variables, as independent variables, neither metal was a significant predictor of eGFR. Odds ratios (ORs) and 95% CI values for reduced eGFR calculated for log2-transformed blood metals and quartiles of the three metals showed similar trends after adjustment for covariates. Discussion: In this large, representative sample of South Korean adults, elevated blood lead level was consistently associated with lower eGFR levels and with the prevalence of reduced eGFR even in blood lead levels below 10 {mu}g/dL. In conclusion, elevated blood lead level was associated with lower eGFR in a Korean general population, supporting the role of lead as a risk factor for chronic kidney disease.

  2. Norwegian Silicon Refining AS | Open Energy Information

    Open Energy Info (EERE)

    214 Product: Oslo-based company with an upgraded metallurgical silicon (UMG) production process called the Stubergh method. Coordinates: 59.91228, 10.74998 Show Map Loading...

  3. Norwegian carbon taxes and their implication for fossil fuels

    SciTech Connect (OSTI)

    Kaarstad, O.

    1995-12-31

    The Scandinavian countries, and in particular Norway and Sweden, have since 1990/91 taxed CO{sub 2}-emissions with carbon tax of about US $150 per ton of CO{sub 2}. One may therefore say that these countries have placed themselves in a role as {open_quotes}carbon tax laboratories{close_quotes}. These very high CO{sub 2}-taxes have been in place for about four years and the first lessons from this experience are reported. In general it would seem as if the taxation mechanism is less efficient than economists have expected. The CO{sub 2}-emissions are increasing in both Norway and Sweden and the stabilization goal to the year 2000 will not be achieved in spite of the high taxation. The fossil fuel industry will have to learn to live with the climate change question which is inherently hostile to fossil fuels. It is argued that a more informed and active participation by the fossil fuel industry is needed in the climate change discussion. In addition the image of fossil fuels will benefit from showing real and potential improvement in the area of greenhouse gas emissions in the whole energy chain from production to combustion. The R&D effort being done into CO{sub 2}-capture and -disposal is creating such an option for the future. It is argued that the image of the entire fossil fuel industry will benefit from the creation of a {open_quotes}CO{sub 2}-free{close_quote} option or vision for oil, gas and coal. A number of examples are shown where today (or in the near future) actual CO{sub 2}-disposal in underground formations are taking place.

  4. Vitrification of Polyvinyl Chloride Waste from Korean Nuclear Power Plants

    SciTech Connect (OSTI)

    Sheng, Jiawei [Kyoto University (Japan); Choi, Kwansik [Nuclear Environment Technology Institute (Korea, Republic of); Yang, Kyung-Hwa [Nuclear Environment Technology Institute (Korea, Republic of); Lee, Myung-Chan [Nuclear Environment Technology Institute (Korea, Republic of); Song, Myung-Jae [Nuclear Environment Technology Institute (Korea, Republic of)

    2000-02-15

    Vitrification is considered as an economical and safe treatment technology for low-level radioactive waste (LLW) generated from nuclear power plants (NPPs). Korea is in the process of preparing for its first ever vitrification plant to handle LLW from its NPPs. Polyvinyl chloride (PVC) has the largest volume of dry active wastes and is the main waste stream to treat. Glass formulation development for PVC waste is the focus of study. The minimum additive waste stabilization approach has been utilized in vitrification. It was found that glasses can incorporate a high content of PVC ash (up to 50 wt%), which results in a large volume reduction. A glass frit, KEP-A, was developed to vitrify PVC waste after the optimization of waste loading, melt viscosity, melting temperature, and chemical durability. The KEP-A could satisfactorily vitrify PVC with a waste loading of 30 to 50 wt%. The PVC-frit was tolerant of variations in waste composition.

  5. South Korean energy outlook: Coal and electricity focus

    SciTech Connect (OSTI)

    Young, E.M.; Johnson, C.J.; Li, B.

    1995-03-01

    This paper concisely outlines the capacity for Korea to generate electricity by using coal. Resources (native and imported) as well as facilities are reviewed.

  6. Status of the Norwegian thorium light water reactor (LWR) fuel development and irradiation test program

    SciTech Connect (OSTI)

    Drera, S.S.; Bjork, K.I.; Kelly, J.F.; Asphjell, O.

    2013-07-01

    Thorium based fuels offer several benefits compared to uranium based fuels and should thus be an attractive alternative to conventional fuel types. In order for thorium based fuel to be licensed for use in current LWRs, material properties must be well known for fresh as well as irradiated fuel, and accurate prediction of fuel behavior must be possible to make for both normal operation and transient scenarios. Important parameters are known for fresh material but the behaviour of the fuel under irradiation is unknown particularly for low Th content. The irradiation campaign aims to widen the experience base to irradiated (Th,Pu)O{sub 2} fuel and (Th,U)O{sub 2} with low Th content and to confirm existing data for fresh fuel. The assumptions with respect to improved in-core fuel performance are confirmed by our preliminary irradiation test results, and our fuel manufacture trials so far indicate that both (Th,U)O{sub 2} and (Th,Pu)O{sub 2} fuels can be fabricated with existing technologies, which are possible to upscale to commercial volumes.

  7. Norwegian Young Sea Ice Experiment (N-ICE) Field Campaign Report

    Office of Scientific and Technical Information (OSTI)

    ... This includes understanding how different components of the Arctic system affect sea ice (e.g., atmosphere, ocean), but also how changing sea ice affects the system (e.g., ecology, ...

  8. Low-cost integrated teamwork and seismic monitoring improved reservoir management of Norwegian gas reservoir with active water drive

    SciTech Connect (OSTI)

    Grinde, P.; Blanche, J.P.; Schnapper, D.B.

    1994-12-31

    This paper shows how new techniques, using integrated seismic and reservoir modelling, have shown there is no need to drill two previously proposed additional need to drill two previously proposed additional producers on the Heimdal gas field. Older simulations had shown this to be necessary in order to recover locally trapped gas. The study emphasizes the necessity of close team work to obtain the detailed reservoir description needed for such a study. A multidisciplinary team of geologists, geophysicists and reservoir specialists performed this study to reappraise the Heimdal Field. Using seismic attributes from 3D (mainly 2D amplitude versus offset AVO) a detailed structural and seismic stratigraphic interpretation provided the geometrical basis for the field model. A heterogenetic approach (identifying potential flow barriers) to detailed geology was then applied using regional experience and detailed field data including the production characteristics. The resulting reservoir model also incorporated offset fields on common regional aquifers, to properly monitor and predict the dynamic pressure behavior and aquifer energy in this series of connecting, Paleocene, turbiditic sands. Two repetitive seismic campaigns have been acquired since the pre-production 3D seismic survey. Mapping of the water encroachment was accomplished using advanced interpretation techniques of 2D AVO and inversion. The results have been integrated into the dynamic matching process in the reservoir simulation.

  9. Pilot-scale Tests to Vitrify Korean Low-Level Wastes

    SciTech Connect (OSTI)

    Choi, K.; Kim, C.-W.; Park, J. K.; Shin, S. W.; Song, M.-J.; Brunelot, P.; Flament, T.

    2002-02-26

    Korea is under preparation of its first commercial vitrification plant to handle LLW from her Nuclear Power Plants (NPPs). The waste streams include three categories: combustible Dry Active Wastes (DAW), borate concentrates, and spent resin. The combustible DAW in this research contains vinyl bag, paper, and protective cloth and rubber shoe. The loaded resin was used to simulate spent resin from NPPs. As a part of this project, Nuclear Environment Technology Institute (NETEC) has tested an operation mode utilizing its pilot-scale plant and the mixed waste surrogates of resin and DAW. It has also proved, with continuous operation for more than 100 hours, the consistency and operability of the plant including cold crucible melter and its off-gas treatment equipment. Resin and combustible DAW were simultaneously fed into the glass bath with periodic addition of various glass frits as additives, so that it achieved a volume reduction factor larger than 70. By adding various glass frits, this paper discusses about maintaining the viscosity and electrical conductivity of glass bath within their operable ranges, but not about obtaining a durable glass product. The operating mode starts with a batch of glass where a titanium ring is buried. When the induced power ignites the ring, the joule heat melts the surrounding glass frit along with the oxidation heat of titanium. As soon as the molten bath is prepared, in the first stage of the mode, the wastes consisting of loaded resin and combustible DAW are fed with no or minimum addition of glass frits. Then, in the second stage, the bath composition is kept as constant as possible. This operation was successful in terms of maintaining the glass bath under operable condition and produced homogeneous glass. This operation mode could be adapted in commercial stage.

  10. Renovated Korean nuclear safety and security system: A review and suggestions to successful settlement

    SciTech Connect (OSTI)

    Chung, W. S.; Yun, S. W.; Lee, D. S.; Go, D. Y.

    2012-07-01

    Questions of whether past nuclear regulatory body of Korea is not a proper system to monitor and check the country's nuclear energy policy and utilization have been raised. Moreover, a feeling of insecurity regarding nuclear safety after the nuclear accident in Japan has spread across the public. This has stimulated a renovation of the nuclear safety regime in Korea. The Nuclear Safety and Security Commission (NSSC) was launched on October 26, 2011 as a regulatory body directly under the President in charge of strengthening independence and nuclear safety. This was a meaningful event as the NSSC it is a much more independent regulatory system for Korea. However, the NSSC itself does not guarantee an enhanced public acceptance of the nuclear policy and stable use nuclear energy. This study introduces the new NSSC system and its details in terms of organization structure, appropriateness of specialty, budget stability, and management system. (authors)

  11. Solargen Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    Korea (Republic) Product: Korean PV project SPV of Kedcom, a Korean manufacturer of communication and electronic products. References: Solargen Co Ltd1 This article is a stub....

  12. Impact of isoprene and HONO chemistry on ozone and OVOC formation in a semirural South Korean forest

    SciTech Connect (OSTI)

    Kim, Saewung; Kim, So-Young; Lee, Meehye; Shim, Heeyoun; Wolfe, Glenn; Guenther, Alex B.; He, Amy; Hong, Youdeog; Han, Jinseok

    2014-01-01

    Rapid urbanization and economic development in East Asia in past decades has led to photochemical air pollution problems such as excess photochemical ozone and aerosol formation. Asian megacities such as Seoul, Tokyo, Shanghai, Gangzhou, and Beijing are surrounded by densely forested areas and recent research has consistently demonstrated the importance of biogenic volatile organic compounds from vegetation in determining oxidation capacity in the suburban Asian megacity regions. Uncertainties in constraining tropospheric oxidation capacity, dominated by hydroxyl radical concentrations, undermine our ability to assess regional photochemical air pollution problems. We present an observational dataset of CO, NOX, SO2, ozone, HONO, and VOCs (anthropogenic and biogenic) from Taehwa Research Forest (TRF) near the Seoul Metropolitan Area (SMA) in early June 2012. The data show that TRF is influenced both by aged pollution and fresh BVOC emissions. With the dataset, we diagnose HOx (OH, HO2, and RO2) distributions calculated with the University of Washington Chemical Box Model (UWCM v 2.1). Uncertainty from unconstrained HONO sources and radical recycling processes highlighted in recent studies is examined using multiple model simulations with different model constraints. The results suggest that 1) different model simulation scenarios cause systematic differences in HOX distributions especially OH levels (up to 2.5 times) and 2) radical destruction (HO2+HO2 or HO2+RO2) could be more efficient than radical recycling (HO2+NO) especially in the afternoon. Implications of the uncertainties in radical chemistry are discussed with respect to ozone-VOC-NOX sensitivity and oxidation product formation rates. Overall, the VOC limited regime in ozone photochemistry is predicted but the degree of sensitivity can significantly vary depending on the model scenarios. The model results also suggest that RO2 levels are positively correlated with OVOCs production that is not routinely constrained by observations. These unconstrained OVOCs can cause higher than expected OH loss rates (missing OH reactivity) and secondary organic aerosol formation. The series of modeling experiments constrained by observations strongly urge observational constraint of the radical pool to enable precise understanding of regional photochemical pollution problems in the East Asian megacity region.

  13. Impact of isoprene and HONO chemistry on ozone and OVOC formation in a semirural South Korean forest

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Kim, S.; Kim, S. -Y.; Lee, M.; Shim, H.; Wolfe, G. M.; Guenther, A. B.; He, A.; Hong, Y.; Han, J.

    2015-04-29

    Rapid urbanization and economic development in East Asia in past decades has led to photochemical air pollution problems such as excess photochemical ozone and aerosol formation. Asian megacities such as Seoul, Tokyo, Shanghai, Guangzhou, and Beijing are surrounded by densely forested areas, and recent research has consistently demonstrated the importance of biogenic volatile organic compounds (VOCs) from vegetation in determining oxidation capacity in the suburban Asian megacity regions. Uncertainties in constraining tropospheric oxidation capacity, dominated by hydroxyl radical, undermine our ability to assess regional photochemical air pollution problems. We present an observational data set of CO, NOx, SO2, ozone, HONO,more » and VOCs (anthropogenic and biogenic) from Taehwa research forest (TRF) near the Seoul metropolitan area in early June 2012. The data show that TRF is influenced both by aged pollution and fresh biogenic volatile organic compound emissions. With the data set, we diagnose HOx (OH, HO2, and RO2) distributions calculated using the University of Washington chemical box model (UWCM v2.1) with near-explicit VOC oxidation mechanisms from MCM v3.2 (Master Chemical Mechanism). Uncertainty from unconstrained HONO sources and radical recycling processes highlighted in recent studies is examined using multiple model simulations with different model constraints. The results suggest that (1) different model simulation scenarios cause systematic differences in HOx distributions, especially OH levels (up to 2.5 times), and (2) radical destruction (HO2 + HO2 or HO2 + RO2) could be more efficient than radical recycling (RO2 + NO), especially in the afternoon. Implications of the uncertainties in radical chemistry are discussed with respect to ozone–VOC–NOx sensitivity and VOC oxidation product formation rates. Overall, the NOx limited regime is assessed except for the morning hours (8 a.m. to 12 p.m. local standard time), but the degree of sensitivity can significantly vary depending on the model scenarios. The model results also suggest that RO2 levels are positively correlated with oxygenated VOCs (OVOCs) production that is not routinely constrained by observations. These unconstrained OVOCs can cause higher-than-expected OH loss rates (missing OH reactivity) and secondary organic aerosol formation. The series of modeling experiments constrained by observations strongly urge observational constraint of the radical pool to enable precise understanding of regional photochemical pollution problems in the East Asian megacity region.« less

  14. Impact of isoprene and HONO chemistry on ozone and OVOC formation in a semirural South Korean forest

    SciTech Connect (OSTI)

    Kim, S.; Kim, S. -Y.; Lee, M.; Shim, H.; Wolfe, G. M.; Guenther, A. B.; He, A.; Hong, Y.; Han, J.

    2015-04-29

    Rapid urbanization and economic development in East Asia in past decades has led to photochemical air pollution problems such as excess photochemical ozone and aerosol formation. Asian megacities such as Seoul, Tokyo, Shanghai, Guangzhou, and Beijing are surrounded by densely forested areas, and recent research has consistently demonstrated the importance of biogenic volatile organic compounds (VOCs) from vegetation in determining oxidation capacity in the suburban Asian megacity regions. Uncertainties in constraining tropospheric oxidation capacity, dominated by hydroxyl radical, undermine our ability to assess regional photochemical air pollution problems. We present an observational data set of CO, NOx, SO2, ozone, HONO, and VOCs (anthropogenic and biogenic) from Taehwa research forest (TRF) near the Seoul metropolitan area in early June 2012. The data show that TRF is influenced both by aged pollution and fresh biogenic volatile organic compound emissions. With the data set, we diagnose HOx (OH, HO2, and RO2) distributions calculated using the University of Washington chemical box model (UWCM v2.1) with near-explicit VOC oxidation mechanisms from MCM v3.2 (Master Chemical Mechanism). Uncertainty from unconstrained HONO sources and radical recycling processes highlighted in recent studies is examined using multiple model simulations with different model constraints. The results suggest that (1) different model simulation scenarios cause systematic differences in HOx distributions, especially OH levels (up to 2.5 times), and (2) radical destruction (HO2 + HO2 or HO2 + RO2) could be more efficient than radical recycling (RO2 + NO), especially in the afternoon. Implications of the uncertainties in radical chemistry are discussed with respect to ozoneVOCNOx sensitivity and VOC oxidation product formation rates. Overall, the NOx limited regime is assessed except for the morning hours (8 a.m. to 12 p.m. local standard time), but the degree of sensitivity can significantly vary depending on the model scenarios. The model results also suggest that RO2 levels are positively correlated with oxygenated VOCs (OVOCs) production that is not routinely constrained by observations. These unconstrained OVOCs can cause higher-than-expected OH loss rates (missing OH reactivity) and secondary organic aerosol formation. The series of modeling experiments constrained by observations strongly urge observational constraint of the radical pool to enable precise understanding of regional photochemical pollution problems in the East Asian megacity region.

  15. The crystal structure of aluminum doped {beta}-rhombohedral boron...

    Office of Scientific and Technical Information (OSTI)

    ... (Germany) Swiss-Norwegian Beam Line, ESRF, F-38043 Grenoble Cedex (France) Swiss-Norwegian Beam Line, ESRF, F-38043 Grenoble Cedex (France) Publication Date: 2012-10-15 OSTI ...

  16. bectso-ct121 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... II Demonstration Results (Sept 1996) D.P. Burford (Southern Company Services, Inc.), Conferinta Nationala a Energiei Romanian National Power Conference, Neptun-Olimp, Romania. ...

  17. MultiPower ASA Formerly Jumpit ASA | Open Energy Information

    Open Energy Info (EERE)

    Place: Oslo, Norway Zip: N-0117 Product: Norwegian firm focused on the development of batteries, both rechargeable and disposable. Coordinates: 59.91228, 10.74998 Show Map...

  18. MHK Technologies/Trondheim Point Absorber | Open Energy Information

    Open Energy Info (EERE)

    Point Absorber.jpg Technology Profile Primary Organization Norwegian University of Science and Technology CONWEC AS Technology Resource Click here Wave Technology Description...

  19. Norsun AS | Open Energy Information

    Open Energy Info (EERE)

    Norsun AS Jump to: navigation, search Name: Norsun AS Place: Oslo, Norway Zip: NO-0151 Product: Norwegian manufacturer of monocrystalline ingots and PV wafers. Coordinates:...

  20. Scatec Solar | Open Energy Information

    Open Energy Info (EERE)

    Solar Jump to: navigation, search Name: Scatec Solar Place: Norway Product: Norwegian PV system integrator with a parent, Norsun, that manufactures monocrystalline silicon ingots...

  1. Elkem Solar | Open Energy Information

    Open Energy Info (EERE)

    Solar Product: Norwegian manufacturer of solar grade silicon that uses metallurgical process. Coordinates: 59.91228, 10.74998 Show Map Loading map... "minzoom":false,"map...

  2. Hammerfest UK | Open Energy Information

    Open Energy Info (EERE)

    Hammerfest UK Place: Scotland, United Kingdom Product: ScottishPower and Norwegian technology company Hammerfest Strm set up a new tidal power company Hammerfest UK utilising...

  3. REC Group Renewable Energy Corporation | Open Energy Information

    Open Energy Info (EERE)

    Group Renewable Energy Corporation Jump to: navigation, search Name: REC Group (Renewable Energy Corporation) Place: Hvik, Norway Zip: N-1323 Sector: Solar Product: Norwegian...

  4. Browse by Discipline -- E-print Network Subject Pathways: Biology...

    Office of Scientific and Technical Information (OSTI)

    V W X Y Z Ursin, Bjrn (Bjrn Ursin) - Department of Petroleum Engineering and Applied Geophysics, Norwegian University of Science and Technology Go back to Individual ...

  5. IG SAR 5-09.qxd

    Energy Savers [EERE]

    2008 - MARCH 31, 2009 11 SEMIANNUAL REPORT TO CONGRESS Romanian National Sentenced for Hacking into U.S. Government Computers A joint DOE OIG investigation with the Naval Criminal...

  6. Dongyang Creditech Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    Co Ltd Place: Yongin, Gyeonggi-do, Korea (Republic) Product: Korean manufacturer of OLED; diversifying into PV modules. Coordinates: 37.22229, 127.227028 Show Map Loading...

  7. Quanta to the Continuum: Opportunities for Mesoscale Science...

    Office of Scientific and Technical Information (OSTI)

    Resource Relation: Conference: Korean Institute for Basic Science seminar ; 2012-09-07 - 2012-09-07 ; Seoul, Korea, South Research Org: Los Alamos National Laboratory (LANL) ...

  8. Seoul National University | Open Energy Information

    Open Energy Info (EERE)

    Zip: 151-742 Product: SNU was the first ever national university established in modern Korean history and is still perceived as the leading university in Korea. Coordinates:...

  9. Hae In Corp Haein Corp | Open Energy Information

    Open Energy Info (EERE)

    137-130 Product: Korean manufacturer of heavy equipments for the construction, mining, civil engineering, agriculture, fishery, forestry, livestock and power generation sectors....

  10. Micro Bubble Technologies Inc MBT | Open Energy Information

    Open Energy Info (EERE)

    Sector: Carbon Product: US-Korean maker of cleaner burning fuel and carbon nanotube batteries. Coordinates: 41.740155, -71.308294 Show Map Loading map......

  11. YPP Energy Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    South Jeolla, Korea (Republic) Sector: Renewable Energy Product: Korean manufacturer of control electronics for renewable energy system; PV project developer. Coordinates:...

  12. Millinet Solar Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    Millinet Solar Co Ltd Jump to: navigation, search Name: Millinet Solar Co Ltd Place: Daegu, Daegu, Korea (Republic) Product: Korean manufacturer of multicrystalline silicon PV...

  13. Ados Co Ltd Dong Yang Semiconductor | Open Energy Information

    Open Energy Info (EERE)

    Ados Co Ltd Dong Yang Semiconductor Jump to: navigation, search Name: Ados Co Ltd (Dong Yang Semiconductor) Place: Seoul, Seoul, Korea (Republic) Product: Korean manufacturer of...

  14. Dasstech Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    Chungcheong, Korea (Republic) Sector: Solar Product: Korean manufacturer of solar inverters, UPS, and installer of PV system. Coordinates: 35.268002, 128.658524 Show Map...

  15. Hanyang Electric Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    Solar Product: Korean manufacturer of various electronic goods, including solar inverters. Coordinates: 37.840069, 126.840172 Show Map Loading map......

  16. Paru Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    Sector: Solar Product: Korean manufacturer of environmental control systems and solar tracking systems. Coordinates: 35.00404, 127.378731 Show Map Loading map......

  17. Energy Solutions Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    Energy Solutions Co Ltd Jump to: navigation, search Name: Energy Solutions Co Ltd Place: Seoul, Korea (Republic) Sector: Efficiency Product: A Korean builderengineering contractor...

  18. Hanshin Development Power Co Ltd formerly ibridge | Open Energy...

    Open Energy Info (EERE)

    Co. Ltd (formerly ibridge) Place: Seoul, Seoul, Korea (Republic) Sector: Solar, Wind energy Product: Korean wind and solar project developer, manufacturer of OLEDs and smart...

  19. KCC Corp | Open Energy Information

    Open Energy Info (EERE)

    Seoul, Seoul, Korea (Republic) Sector: Solar Product: Korean manufacturer of various building materials; as of Feb 2008, entered the polysilicon production for solar-use....

  20. EO Technics Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    Product: Korean manufacturer of laser technologies; offers laser scribing equipment for thin-film and edge isolation for cell fabrication. Coordinates: 37.396309, 126.930939...

  1. Unison Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    Co Ltd Place: Cheonan, South Chungcheong, Korea (Republic) Zip: 330 882 Sector: Solar, Wind energy Product: Korean solar and wind project developer; manufacturer of turbine...

  2. Gijeon Wintec co ltd | Open Energy Information

    Open Energy Info (EERE)

    Name: Gijeon Wintec co ltd Place: Gwangju, Gwangju, Korea (Republic) Sector: Solar, Wind energy Product: Korean wind and solar project developer. Coordinates: 35.15007,...

  3. DI Semicon Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    Seoul, Korea (Republic) Sector: Solar Product: Korean company that offers testing and packaging of Display Drive ID; as of December 2007, entered into a secondary business in solar...

  4. CN Solar Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    CN Solar Co Ltd Jump to: navigation, search Name: CN Solar Co Ltd Place: Sangju, North Gyeongsang, Korea (Republic) Sector: Solar Product: Korean solar project developer....

  5. Getwatt KISCO s energy division | Open Energy Information

    Open Energy Info (EERE)

    Jump to: navigation, search Name: Getwatt (KISCO's energy division) Place: Jeungpeong, North Chungcheong, Korea (Republic) Zip: 368-906 Product: Energy division of South Korean...

  6. Sodiff Advanced Materials Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    Co Ltd Jump to: navigation, search Name: Sodiff Advanced Materials Co Ltd Place: Yeongju, North Gyeongsang, Korea (Republic) Product: Korean manufacturer of advanced materials for...

  7. South Korea-ANL Distributed Energy Resources and Demand Side...

    Open Energy Info (EERE)

    is part of a team that assists the Korean government in analyzing the economic and environmental benefits of distributed resources and demand side management (DSM). DSM has...

  8. Emcore DI Semicon JV | Open Energy Information

    Open Energy Info (EERE)

    Place: Korea (Republic) Product: Emcore and DI Semicon combine forces in a South Korean joint venture to manufacture PV systems. References: Emcore & DI Semicon JV1 This...

  9. Timo Technology Company Ltd | Open Energy Information

    Open Energy Info (EERE)

    Place: Seoul, Korea (Republic) Sector: Solar Product: Korean-based Timo Technology has a joint venture with Australia's Dyesol for dye solar cell technology. References: Timo...

  10. AirTec System Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    Korean wireless communications equipment vendor; as of January 2008, established a Green Energy Business Division as a PV project developer. Coordinates: 37.281368, 127.013077...

  11. Kornic Glory Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    Product: Korean manufacturer of PV silicon cells; provides consulting services for computer systems. Coordinates: 37.557121, 126.977379 Show Map Loading map......

  12. Human Technology Co Ltd H T | Open Energy Information

    Open Energy Info (EERE)

    Place: Cheongju, North Chungcheong, Korea (Republic) Product: Korean manufacturer of computer parts, supplying mainly to Samsung; pursuing a study for polysilicon manufacturing in...

  13. STX Corp | Open Energy Information

    Open Energy Info (EERE)

    Sector: Wind energy Product: Korean holding company engaged in trade and ship maintenance; subsidiaries are planning to be involved in PV cell and module manufacture and...

  14. Jarada Inc | Open Energy Information

    Open Energy Info (EERE)

    Jarada Inc Jump to: navigation, search Name: Jarada Inc Place: Seongnam, Gyeonggi-do, Korea (Republic) Sector: Solar Product: South Korean company involved in solar power...

  15. Halla Electric Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    Electric Co Ltd Jump to: navigation, search Name: Halla Electric Co Ltd Place: Daegu, Korea (Republic) Sector: Solar Product: A Korean utility company based in Daegu but...

  16. Beijing Palco Fuel Technology Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    Energy Product: Korean renewable energy developer, LBL Corporation, and Chinese hi-tech incubator, Beijing Ideal-land, have set up a bioethanol JV under the name Beijing...

  17. Tes Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    Product: Korean manufacturer of semiconductor capital equipment; works with LG Electronics to build PECVD equipment Coordinates: 37.22229, 127.227028 Show Map Loading...

  18. SFC Ltd formerly SamWoo Film | Open Energy Information

    Open Energy Info (EERE)

    Solar Product: Korean manufacturer of various types of film, including light diffusion, printing, OHP, inkjet films and TPT-type backsheets for solar modules. Coordinates:...

  19. Sunluz | Open Energy Information

    Open Energy Info (EERE)

    search Name: Sunluz Place: Fort Worth, Texas Product: Texas-based PV module manufacturing joint venture between Coaire and and an undisclosed South Korean majority owner....

  20. Smart Applications Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    Co Ltd Jump to: navigation, search Name: Smart Applications Co Ltd Place: Cheonan, South Chungcheong, Korea (Republic) Product: Korean manufacturer of PV ingots and wafers; other...

  1. Vietnam-Development Policy Operation (DPO) Financing | Open Energy...

    Open Energy Info (EERE)

    Policy Operation Financing AgencyCompany Organization France Agency of Development (AFD) Partner JICA, CIDA, WB, Korean Exim, AusAid Sector Climate Focus Area Non-renewable...

  2. Samsung C T formerly Samsung Corporation | Open Energy Information

    Open Energy Info (EERE)

    T formerly Samsung Corporation Jump to: navigation, search Name: Samsung C&T (formerly Samsung Corporation) Place: Seoul, Seoul, Korea (Republic) Zip: 137-956 Product: Major Korean...

  3. Brain Receptor Structures Key to Future Therapeutics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AMPA, -amino-3-hydroxy-5-methyl-4-isoxazolepropionic acid; and NMDA, N-methyl-D-aspartate. The receptors used in the studies-from the Norwegian rat and the frog Xenopus...

  4. REC ScanWafer AS | Open Energy Information

    Open Energy Info (EERE)

    ScanWafer AS Jump to: navigation, search Name: REC ScanWafer AS Place: Hovik, Norway Zip: 1323 Product: Norwegian manufacturer of multicrystalline wafers. Coordinates: 58.002571,...

  5. SEMINAR ANNOUNCEMENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Annika%Hofgaard Norwegian%Ins:tute%for%Nature%Research%%NINA Subarc:c%Forest%Advance%%EmpiricalBased Results%vs.%Modeled%Predic:ons Wednesday,%January%28,%2015 1:00%%2:00%PM...

  6. Metallkraft AS | Open Energy Information

    Open Energy Info (EERE)

    Product: Norwegian company providing SiC and glycol recovery for reuse in wafer manufacturing and recovering solar-grade silicon. Coordinates: 58.143805, 7.994845 Show Map...

  7. Hydrogen | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... to Washington, D.C. by Hyundai executives from South Korea who were in the United States as part of South Korean President Park Guen-hye's delegation visiting President Obama. ...

  8. MHK Projects/Lunar Energy Wando Hoenggan Waterway South Korea...

    Open Energy Info (EERE)

    the Wando Hoenggan waterway off the South Korean coast. Full resource research and feasibility studies should be complete by July 2008 with the installation of a 1 MW pilot plant...

  9. Slide15 | OSTI, US Dept of Energy, Office of Scientific and Technical

    Office of Scientific and Technical Information (OSTI)

    Information Multilingual Translations Translating ten languages, with potential for more Arabic Chinese German Deutsch English Spanish Español French Français Japanese Korean Portuguese Português Russian

  10. http://www.nellis.af.mil/library/factsheets/factsheet_print.asp

    National Nuclear Security Administration (NNSA)

    ... With the onset of the Korean War, the mission of LVAFB changed from an advanced single- engine school to one of training jet fighter pilots for the then Far East Air Forces. In ...

  11. SolarTech | Open Energy Information

    Open Energy Info (EERE)

    SolarTech Jump to: navigation, search Name: SolarTech Place: Uzbekistan Product: Korean and Uzbekistan JV that is formed to secure high-purity silica from Uzbekistan for...

  12. Samsung America Inc SAI | Open Energy Information

    Open Energy Info (EERE)

    America Inc SAI Jump to: navigation, search Name: Samsung America Inc (SAI) Place: Ridgefield Park, New Jersey Zip: 7660 Product: US subsidiary of Korean conglomerate Samsung C&T....

  13. TF Solarpower | Open Energy Information

    Open Energy Info (EERE)

    TF Solarpower Place: Andra Pradesh, India Zip: 500048 Product: Indian-Korean JV to make thin film silicon modules. References: TF Solarpower1 This article is a stub. You can...

  14. SolarPark Engineering Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    SolarPark Engineering Co Ltd Jump to: navigation, search Name: SolarPark Engineering Co Ltd Place: Bucheon, Gyeonggi-do, Korea (Republic) Sector: Solar Product: Korean solar...

  15. Kyungdong Solar Co Ltd KD Solar | Open Energy Information

    Open Energy Info (EERE)

    Co Ltd KD Solar Jump to: navigation, search Name: Kyungdong Solar Co Ltd (KD Solar) Place: Sungnam-si, Gyeonggi-do, Korea (Republic) Product: Korean manufacturer of PV modules and...

  16. Estrogen induced {beta}-1,4-galactosyltransferase 1 expression...

    Office of Scientific and Technical Information (OSTI)

    ... Authors: Choi, Hee-Jung 1 ; Division of Applied Medicine, School of Korean Medicine, Pusan National University, Yangsan-city, Gyeongsangnam-do 2 ; Chung, Tae-Wook ; Kim, ...

  17. armed forces

    National Nuclear Security Administration (NNSA)

    organization that takes World War II, Korean War and Vietnam War veterans to the U.S. capital to see the memorials built in their honor at zero cost to the veteran.

  18. veterans

    National Nuclear Security Administration (NNSA)

    organization that takes World War II, Korean War and Vietnam War veterans to the U.S. capital to see the memorials built in their honor at zero cost to the veteran.

  19. Turtleback Corporation | Open Energy Information

    Open Energy Info (EERE)

    Product: Korean early-stage company seeking to develop 10MW-30MW of PV projects in South Korea. Coordinates: 37.470749, 127.041718 Show Map Loading map......

  20. FineTex EnE Inc | Open Energy Information

    Open Energy Info (EERE)

    EnE Inc Place: Seoul, Korea (Republic) Zip: 137-875 Product: Korean manufacturer of energy saving air conditioners and heating systems. Coordinates: 37.557121, 126.977379 Show...

  1. POSCO Machinery Co Ltd POS M | Open Energy Information

    Open Energy Info (EERE)

    Machinery Co Ltd POS M Jump to: navigation, search Name: POSCO Machinery Co Ltd (POS-M) Place: Junnam, Korea (Republic) Zip: 545 885 Product: Korean-based engineering service...

  2. Tokai Carbon Korea Co Ltd TCK | Open Energy Information

    Open Energy Info (EERE)

    Tokai Carbon Korea Co Ltd TCK Jump to: navigation, search Name: Tokai Carbon Korea Co Ltd (TCK) Place: Anseong, Gyeonggi-do, Korea (Republic) Zip: 456-843 Product: Korean...

  3. Soles Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    Sector: Solar Product: Korean equipment manufacturer to produce LCDs, semiconductors, and solar cells. References: Soles Co Ltd1 This article is a stub. You can help OpenEI by...

  4. Etec E C Ltd | Open Energy Information

    Open Energy Info (EERE)

    Etec E C Ltd Jump to: navigation, search Name: Etec E&C Ltd Place: Seoul, Seoul, Korea (Republic) Zip: 135-889 Product: Korean company engaged in plant engineering, construction...

  5. Semi Materials Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    Semi Materials Co Ltd Jump to: navigation, search Name: Semi-Materials Co Ltd Place: Seongnam, Gyeonggi-do, Korea (Republic) Zip: 463-825 Product: Korean manufacturer of...

  6. Gasification News

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    News South Korean company signs first letter of intent to explore deployment of Kemper technology December 21, 2015 Southern Company subsidiary Southern Generation Technologies has signed a letter of intent with South Korean company Alps Energy and Kellogg, Brown & Root, LLC (KBR) to evaluate the deployment of the company's proprietary coal gasification technology at the new, 1,000-megawatt (MW) Alps Energy power plant in the Saemangeum Industry & Research Area in South Korea. The

  7. INTERNATIONAL COLLABORATION ON CO2 SEQUESTRATION

    SciTech Connect (OSTI)

    Howard J. Herzog; E. Eric Adams

    2003-04-01

    The main goal of our work during this time period (August 23, 2001-August 23, 2002) was to conduct a field experiment in Norwegian waters. Preparation for the field experiment included building the apparatus, designing and obtaining the measurement systems, planning the logistics (ships, crew, supplies, etc.) and conducting a survey cruise. The survey cruise, conducted in July 2002, is documented in this report. The field experiment, scheduled for August 2002, was postponed when the Norwegian environmental minister revoked our permit under pressure from Greenpeace. Events surrounding the permitting situation are documented in the Appendix.

  8. Subsea manifolds become a practical matter

    SciTech Connect (OSTI)

    Not Available

    1985-05-01

    Norwegian deep waters are providing a powerful incentive for using subsea manifolds. Some of the most important conceptual and practical work is being done by ACB, Nantes. ACB's ''Reliability through Simplicity'' philosophy could ultimately help to bring down subsea costs. This might be used to open up the UK's large number of marginal fields in moderate depths by tying production back to existing installations.

  9. ZERO EMISSION POWER GENERATION TECHNOLOGY DEVELOPMENT

    SciTech Connect (OSTI)

    Ronald Bischoff; Stephen Doyle

    2005-01-20

    Clean Energy Systems (CES) was previously funded by DOE's ''Vision 21'' program. This program provided a proof-of-concept demonstration that CES' novel gas generator (combustor) enabled production of electrical power from fossil fuels without pollution. CES has used current DOE funding for additional design study exercises which established the utility of the CES-cycle for retrofitting existing power plants for zero-emission operations and for incorporation in zero-emission, ''green field'' power plant concepts. DOE funding also helped define the suitability of existing steam turbine designs for use in the CES-cycle and explored the use of aero-derivative turbines for advanced power plant designs. This work is of interest to the California Energy Commission (CEC) and the Norwegian Ministry of Petroleum & Energy. California's air quality districts have significant non-attainment areas in which CES technology can help. CEC is currently funding a CES-cycle technology demonstration near Bakersfield, CA. The Norwegian government is supporting conceptual studies for a proposed 40 MW zero-emission power plant in Stavager, Norway which would use the CES-cycle. The latter project is called Zero-Emission Norwegian Gas (ZENG). In summary, current engineering studies: (1) supported engineering design of plant subsystems applicable for use with CES-cycle zero-emission power plants, and (2) documented the suitability and availability of steam turbines for use in CES-cycle power plants, with particular relevance to the Norwegian ZENG Project.

  10. New additive retards coke formation in ethylene furnace tubes

    SciTech Connect (OSTI)

    Not Available

    1994-05-09

    Adding relatively small amounts of a new additive to the feed stream of a steam cracker can inhibit coke formation on the metal surfaces of processing equipment and increase furnace run time. The additive comprises a variable mixture of four to six inorganic salts in aqueous solution. The components of the additive mixture can be varied, as needed, for processing heavy feed materials such as heavy naphtha and gas oil. The process was first tested at a Korean petrochemical plant and is now operating successfully at a commercial facility in Russia. The results of the Korean trial are presented here.

  11. Shake, Rattle, and Roll

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Shake National Security Science Latest Issue:April 2016 past issues All Issues » submit Shake, Rattle, and Roll Los Alamos scientists analyze North Korea's January 2016 "hydrogen bomb" test to determine the details-location, yield, and type-of the explosion. March 22, 2016 Shake, Rattle, and Roll South Korean protesters burned placards of North Korean leader Kim Jong-Un during an anti-North Korea rally on January 7, 2016, in Seoul, South Korea. Kim Jong-Un claimed that North Korea had

  12. South Korea | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    South Korea United States and the Republic of Korea Sign Agreement for Civil Nuclear Cooperation Washington, DC - Today Secretary of Energy Ernest J. Moniz and Korean Foreign Minister Yun signed the successor United States - Republic of Korea Agreement for Civil Nuclear Cooperation, or 123 Agreement, as they are referred to in the United States. The United States and the Republic of Korea (ROK

  13. Comparison of leaching characteristics of heavy metals from bottom and fly ashes in Korea and Japan

    SciTech Connect (OSTI)

    Shim, Young-Sook; Rhee, Seung-Whee; Lee, Woo-Keun . E-mail: woklee@kangwon.ac.kr

    2005-07-01

    The objective of this research was to compare the leaching characteristics of heavy metals such as cadmium, chromium, copper, nickel, lead, etc., in Korean and Japanese municipal solid waste incineration (MSWI) ash. The rate of leaching of heavy metal was measured by KSLT and JTL-13, and the amount of heavy metals leached was compared with the metal content in each waste component. Finally, bio-availability testing was performed to assess the risks associated with heavy metals leached from bottom ash and fly ash. From the results, the value of neutralization ability in Japanese fly ash was four times higher than that in Korean fly ash. The reason was the difference in the content of Ca(OH){sub 2} in fly ash. The amount of lead leached exceeded the regulatory level in both Japanese and Korean fly ash. The rate of leaching was relatively low in ash with a pH in the range of 6-10. The bio-availability test in fly ash demonstrated that the amount of heavy metals leached was Pb > Cd > Cr, but the order was changed to Pb > Cr > Cd in the bottom ash. The leaching concentration of lead exceeded the Japanese risk level in all fly ashes from the two countries, but the leaching concentration of cadmium exceeded the regulatory level in Korean fly ash only.

  14. Proceedings of the 22nd annual offshore technology conference

    SciTech Connect (OSTI)

    Not Available

    1990-01-01

    This book contains the proceeding of the 22 annual offshore technology conference, volume 1. Topics covered include: South China Sea extended well testing program: Implementation and results; API oil well cementing practices; Offshore grant fields, 1950 to 1990; Exploitation study and impact on the Korean formations; and South El Morgan Field, Gulf of Suez, Egypt.

  15. Post operational investigation of the recovered North East Frigg subsea production equipment after 10 year`s service

    SciTech Connect (OSTI)

    Worley, L.J.; Fjaertoft, L.

    1995-12-31

    Elf Petroleum Norge had for 10 years been operating the North East Frigg field. This gas field was the first subsea field on the Norwegian Continental shelf. It was shut down on the 8th May 1993. Elf Petroleum Norge used the shut down as an ideal opportunity to review the performance of the subsea equipment. An investigation was initiated,its purpose, to gather information regarding the history, wear, effect of cathodic protection, corrosion etc from the X-mas tree components.

  16. Ivar Giaever, Tunneling, and Superconductors

    Office of Scientific and Technical Information (OSTI)

    Ivar Giaever, Tunneling, and Superconductors Resources with Additional Information * Patents Ivar Giaever Courtesy of Rensselaer Polytechnic Institute 'Dr. Giaever received his engineering degree at the Norwegian Institute of Technology. After college, he emigrated to Canada, where he worked as a mechanical engineer with General Electric, and later transferred to GE's Development Center in Schenectady, N.Y. There, he shifted his interest to physics, and did graduate work at Rensselaer, receiving

  17. zhang(2)-98.pdf

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 Formation of Arctic Stratus Clouds: Comparison of Model Predictions with Observed Cloud Structure Q. Zhang and K. Stamnes Geophysical Institute University of Alaska Fairbanks, Alaska O. Lie-Svendsen Norwegian Defense Research Establishment Kjeller, Norway Introduction The importance of the Arctic region to global climate has been highlighted by the climate modeling results in recent years (e.g., Manabe et al. 1991). Arctic stratus clouds (ASC) are not only one of the most significant regional

  18. zhang-q-99.PDF

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Study of the Formation of Single- and Multiple-Layered Arctic Stratus Clouds Q. Zhang University of Utah Salt Lake City, Utah K. Stamnes and J. Harrington Geophysical Institute University of Alaska Fairbanks, Alaska O. Lie-Svendsen Norwegian Defense Research Establishment Kjeller, Norway Introduction Arctic stratus clouds (ASCs) are a persistent feature in the arctic. They may have an important influence on both the local climate and the global climate. Due to lack of observations, the formation

  19. Environmental impacts of ocean disposal of CO{sub 2}. Fifth quarterly progress report, July 1, 1995--September 30, 1995

    SciTech Connect (OSTI)

    Tester, J.W.; Adams, E.E.

    1996-02-01

    The workshop had two major components: a review of current issues and projects regarding dissolution Of CO{sub 2} in the ocean followed by a specific proposal for a field experiment in a Norwegian fjord. Attachment I contains the agenda and participants for the meeting. Attachment II summarizes each presentation. The challenge of ocean dissolution Of CO{sub 2} involves understanding the trade-offs between costs, benefits (length Of CO{sub 2} sequestration), and environmental impacts (both from direct CO{sub 2} injection and from indirect dissolution as is occurring today). It is quite apparent that we still require a great deal more information than exists today to make rational decisions. Specifically, we need more research directed at the technology for dissolving the CO{sub 2} and at understanding the environmental impacts. While paper studies and laboratory experience are useful, we are approaching the time to move our research into the field. While attendees thought a field experiment in a Norwegian fjord would be a useful exercise, two key concerns were aired: (1) We need to better understand the goals of this experiment and how it relates to the bigger picture. To address this concern a comprehensive list of research needs should be generated. Then, a list of possible field experiments (including the Norwegian fjord) should be generated that allow us to address these questions. (2) Not enough details were presented on the Norwegian fjord experiment. For example, a key question is the scale (i.e. CO{sub 2} flow rate, duration) of the experiment. A follow-up action is to generate a more detailed experimental plan. In summary, the workshop left the following impressions. (3) More research is required to understand the role CO{sub 2} dissolution in the ocean can lay in mitigating global climate change. Field experiments will be required and the timing should be soon. (4) More work is required in developing a research plan for field experiments.

  20. 2015 Carbon Storage Project Review Meeting | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Carbon Storage R&D Project Review Meeting Meeting Summary Presentations Tuesday, August 18, 2015 OPENING PLENARY SESSION - KEYNOTE PRESENTATION Transforming Technology Through Integration and Collaboration Grace M. Bochenek, Ph.D., Director, U.S. Department of Energy, National Energy Technology Laboratory DOE's Clean Coal RD&D Program Mark Ackiewicz, Office of Fossil Energy, U.S. Department of Energy Overview of the Norwegian RD&D CCS Program (CLIMIT) Hans Jörg Fell, Gassnova IEAGHG

  1. Romania: Brand-New Engineering Solutions

    SciTech Connect (OSTI)

    Ken Allen; Lucian Biro; Nicolae Zamfir; Madalina Budu

    2011-01-01

    The HEU spent nuclear fuel transport from Romania was a pilot project in the framework of the Russian Research Reactor Fuel Return Program (RRRFR), being the first fully certified spent nuclear fuel shipment by air. The successful implementation of the Romanian shipment also brought various new technology in the program, further used by other participating countries. Until 2009, the RRRFR program repatriated to the Russian Federation HEU spent nuclear fuel of Russian origin from many countries, like Uzbekistan, Czech Republic, Latvia, Hungary, Kazakhstan and Bulgaria. The means of transport used were various; from specialized TK-5 train for the carriage of Russian TUK-19 transport casks, to platform trains for 20 ft freight ISO containers carrying Czech Skoda VPVR/M casks; from river barge on the Danube, to vessel on the Mediterranean Sea and Atlantic Ocean. Initially, in 2005, the transport plan of the HEU spent nuclear fuel from the National Institute for R&D in Nuclear Physics and Nuclear Engineering 'Horia Hulubei' in Magurele, Romania considered a similar scheme, using the specialized TK-5 train transiting Ukraine to the destination point in the Russian Federation, or, as an alternative, using the means and route of the spent nuclear fuel periodically shipped from the Bulgarian nuclear power plant Kosloduy (by barge on the Danube, and by train through Ukraine to the Russian Federation). Due to impossibility to reach an agreement in due time with the transit country, in February 2007 the US, Russian and Romanian project partners decided to adopt the air shipment of the spent nuclear fuel as prime option, eliminating the need for agreements with any transit countries. By this time the spent nuclear fuel inspections were completed, proving the compliance of the burn-up parameters with the international requirements for air shipments of radioactive materials. The short air route avoiding overflying of any other countries except the country of origin and the country of destination also contributed to the decision making in this issue. The efficient project management and cooperation between the three countries (Russia, Romania and USA) made possible, after two and a half years of preparation work, for the first fully certified spent nuclear fuel air shipment to take place on 29th of June 2009, from Romanian airport 'Henri Coanda' to the Russian airport 'Koltsovo' near Yekaterinburg. One day before that, after a record period of 3 weeks of preparation, another HEU cargo was shipped by air from Romanian Institute for Nuclear Research in Pitesti to Russia, containing fresh pellets and therefore making Romania the third HEU-free country in the RRRFR program.

  2. Universal Charge Order in the High-Tc Superconductors | Stanford

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Cooperation | National Nuclear Security Administration United States and the Republic of Korea Sign Agreement for Civil Nuclear Cooperation June 15, 2015 Washington, DC - Today Secretary of Energy Ernest J. Moniz and Korean Foreign Minister Yun signed the successor United States - Republic of Korea Agreement for Civil Nuclear Cooperation, or 123 Agreement, as they are referred to in the United States. The United States and the Republic of Korea (ROK) are world leaders in civil nuclear energy

  3. Wanda Woods | Argonne Leadership Computing Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of Scientific and Technical Information Walter L. Warnick, Ph.D., Former Director WorldWideScience Alliance Signing Ceremony, June 12, 2008 [Photograph by: Korean Institute of Science and Technology Information] The WorldWideScience Alliance was formalized on June 12, 2008, in Seoul, Korea, by officials from 11 organizations representing 38 countries. WorldWideScience.org is the online gateway to science information issued from nations around the world. The signing ceremony was the

  4. ORISE: Postdoc Research Experiences - Carl Stephan

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Carl Stephan Forensic anthropologist uses chest radiographs to identify skeletons of soldiers Carl Stephan Pictured above, forensic anthropologist Dr. Carl Stephan is examining two hardcopy miniature chest radiographs that have been recorded on the same film. As part of the Joint POW/MIA Accounting Command Research Participation Program, he is developing chest x-ray analysis methods to help identify the U.S. soldiers fallen in the Korean War and buried at the National Memorial Cemetery of the

  5. LNG Observer: Second Qatargas train goes onstream

    SciTech Connect (OSTI)

    1997-01-01

    The January-February, 1997 issue of the LNG Observer is presented. The following topics are discussed: second Qatargas train goes onstream; financing for the eighth Indonesian liquefaction train; Koreans take stakes in Oman LNG; US imports and exports of LNG in 1996; A 60% increase in proved reserves on the North West Shelf; proposals for Indian LNG terminal CEDIGAZ forecasts world LNG trade by 2010; growth for North African gas production and exports; and new forecast sees strong growth for Asian gas.

  6. Progress in Developing the K-DEMO Device Configuration

    SciTech Connect (OSTI)

    Brown, Tom

    2013-06-27

    K-DEMO is being studied by South Korean researchers as a follow-on to ITER and the next step toward the construction of a commercial fusion power plant. The K-DEMO mission defines a staged approach targeting operation with an initial testing phase for plasma facing components and critical operating systems to be followed by a second phase which centers on upgrading the in-vessel components for operation at 200 to 600 MWe with a planned 70% availability.

  7. Proceedings of the international symposium on engineering in complex rock formations

    SciTech Connect (OSTI)

    Not Available

    1988-01-01

    This book contains over 100 papers. Some of the titles are: Rheology of rock-salt and its application for radioactive waste disposal purposes; A scale model study on the deformation around the drift in Korean inclined coal seam; Stabilization of a landslide in fractured marls and limestone; Dead Sea underground hydroelectric power station; and Rock mechanics in design of underground power house of lubuge hydropower project.

  8. Korea Hydro and Nuclear Power Company, Ltd Training

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Korea Hydro and Nuclear Power Co., Ltd. (KHNP), a large electric company based in the Republic of Korea, operates 20 nuclear power plants and has 8 more planned or under construction. The Korean government has given KHNP responsibility for permanent disposal of nuclear waste. The company has turned to Sandia' s Defense Waste Management Programs in Carlsbad, NM to lead an educational project for its staff on repository sciences based on Sandia's well- known expertise in the field. Sandia has

  9. Avian Field guide and checklist for Kunsan Air Base, Korea.

    SciTech Connect (OSTI)

    Levenson, J. B.; Environmental Assessment

    2005-11-15

    This report summarizes the results of the avian surveys conducted at Kunsan Air Base (AB). This on-going survey is conducted to comply with requirements of the Environmental Governing Standards (EGS) for the Republic of Korea, the Integrated Natural Resources Management Plan (INRMP) for Kunsan AB, and the 8th Fighter Wing's Bird Aircraft Strike Hazard (BASH) Plan. One hundred sixteen bird species representing 34 families were identified and recorded. Seven species are designated as Cultural Property Monuments, and their protection is accorded by the Korean Ministry of Culture and Tourism. Six species appear on the Korean Association for Conservation of Nature's(KACN's) list of Reserved Wild Species and are protected by the Korean Ministry of Environment. Combined, only ten different species are Republic of Korea (ROK)-protected because the Eurasian Spoonbill, Peregrine Falcon, and Eurasian Oystercatcher are listed by both agencies. The primary objective of the avian survey at Kunsan AB was to determine what species of birds are present on the airfield and their respective habitat requirements during the critical seasons of the year. This requirement is specified in Annex C.4.a.(1-4) of the 8th Fighter Wing BASH Plan(8FWOPLAN 91-202). The second objective was to initiate surveys to determine what bird species are present on Kunsan AB throughout the year, and from the survey results determine if threatened, endangered, or other Korean-listed bird species are present on Kunsan AB. This overall census satisfies Criterion 13-3.e of the EGS for Korea. The final objective was to formulate management strategies within Kunsan AB's operational requirements to protect and enhance habitats of known threatened, endangered, and ROK-protected species in accordance with EGS Criterion 13-3.a and also that are favorable for the reproduction of indigenous species in accordance with the EGS Criterion 13-3.h.

  10. Avian survey and field guide for Osan Air Base, Korea.

    SciTech Connect (OSTI)

    Levenson, J.

    2006-12-05

    This report summarizes the results of the avian surveys conducted at Osan Air Base (AB). This ongoing survey is conducted to comply with requirements of the Environmental Governing Standards (EGS) for the Republic of Korea, the Integrated Natural Resources Management Plan (INRMP) for Osan AB, and the 51st Fighter Wing's Bird Aircraft Strike Hazard (BASH) Plan. One hundred ten bird species representing 35 families were identified and recorded. Seven species are designated as Natural Monuments, and their protection is accorded by the Korean Ministry of Culture and Tourism. Three species appear on the Korean Association for Conservation of Nature's (KACN's) list of Reserved Wild Species and are protected by the Korean Ministry of Environment. Combined, ten different species are Republic of Korea (ROK)-protected. The primary objective of the avian survey at Osan AB was to determine what species of birds are present on the airfield and their respective habitat requirements during the critical seasons of the year. This requirement is specified in Annex J.14.c of the 51st Fighter BASH Plan 91-212 (51 FW OPLAN 91-212). The second objective was to initiate surveys to determine what bird species are present on Osan AB throughout the year and from the survey results, determine if threatened, endangered, or other Korean-listed bird species are present on Osan AB. This overall census satisfies Criterion 13-3.e of the EGS for Korea. The final objective was to formulate management strategies within Osan AB's operational requirements to protect and enhance habitats of known threatened, endangered, and ROK-protected species in accordance with EGS Criterion 13-3.a that are also favorable for the reproduction of indigenous species in accordance with the EGS Criterion 13-3.h.

  11. Small modular reactor (SMR) development plan in Korea

    SciTech Connect (OSTI)

    Shin, Yong-Hoon Park, Sangrok; Kim, Byong Sup; Choi, Swongho; Hwang, Il Soon

    2015-04-29

    Since the first nuclear power was engaged in Korean electricity grid in 1978, intensive research and development has been focused on localization and standardization of large pressurized water reactors (PWRs) aiming at providing Korean peninsula and beyond with economical and safe power source. With increased priority placed on the safety since Chernobyl accident, Korean nuclear power R and D activity has been diversified into advanced PWR, small modular PWR and generation IV reactors. After the outbreak of Fukushima accident, inherently safe small modular reactor (SMR) receives growing interest in Korea and Europe. In this paper, we will describe recent status of evolving designs of SMR, their advantages and challenges. In particular, the conceptual design of lead-bismuth cooled SMR in Korea, URANUS with 40∼70 MWe is examined in detail. This paper will cover a framework of the program and a strategy for the successful deployment of small modular reactor how the goals would entail and the approach to collaboration with other entities.

  12. North Korea's nuclear weapons program:verification priorities and new challenges.

    SciTech Connect (OSTI)

    Moon, Duk-ho

    2003-12-01

    A comprehensive settlement of the North Korean nuclear issue may involve military, economic, political, and diplomatic components, many of which will require verification to ensure reciprocal implementation. This paper sets out potential verification methodologies that might address a wide range of objectives. The inspection requirements set by the International Atomic Energy Agency form the foundation, first as defined at the time of the Agreed Framework in 1994, and now as modified by the events since revelation of the North Korean uranium enrichment program in October 2002. In addition, refreezing the reprocessing facility and 5 MWe reactor, taking possession of possible weapons components and destroying weaponization capabilities add many new verification tasks. The paper also considers several measures for the short-term freezing of the North's nuclear weapon program during the process of negotiations, should that process be protracted. New inspection technologies and monitoring tools are applicable to North Korean facilities and may offer improved approaches over those envisioned just a few years ago. These are noted, and potential bilateral and regional verification regimes are examined.

  13. NATURAL CO2 FLOW FROM THE LOIHI VENT: IMPACT ON MICROBIAL PRODUCTION AND FATE OF THE CO2

    SciTech Connect (OSTI)

    Richard B. Coffin; Thomas J. Boyd; David L. Knies; Kenneth S. Grabowski; John W. Pohlman; Clark S. Mitchell

    2004-02-27

    The program for International Collaboration on CO{sub 2} Ocean Sequestration was initiated December 1997. Preliminary steps involved surveying a suite of biogeochemical parameters off the coast of Kona on the Big Island of Hawaii. The preliminary survey was conducted twice, in 1999 and 2000, to obtain a thorough data set including measurements of pH, current profiles, CO{sub 2} concentrations, microbial activities, and water and sediment chemistries. These data were collected in order to interpret a planned CO{sub 2} injection experiment. After these preliminary surveys were completed, local environment regulation forced moving the project to the coast north east of Bergen, Norway. The preliminary survey along the Norwegian Coast was conducted during 2002. However, Norwegian government revoked a permit, approved by the Norwegian State Pollution Control Authority, for policy reasons regarding the CO{sub 2} injection experiment. As a result the research team decided to monitor the natural CO{sub 2} flow off the southern coast of the Big Island. From December 3rd-13th 2002 scientists from four countries representing the Technical Committee of the International Carbon Dioxide Sequestration Experiment examined the hydrothermal venting at Loihi Seamount (Hawaiian Islands, USA). Work focused on tracing the venting gases, the impacts of the vent fluids on marine organisms, and CO{sub 2} influence on biogeochemical cycles. The cruise on the R/V Ka'imikai-O-Kanaloa (KOK) included 8 dives by the PISCES V submarine, 6 at Loihi and 2 at a nearby site in the lee of the Big Island. Data for this final report is from the last 2 dives on Loihi.

  14. U.S.-Norway Conference Focuses on Advancing Carbon Capture and Storage |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy -Norway Conference Focuses on Advancing Carbon Capture and Storage U.S.-Norway Conference Focuses on Advancing Carbon Capture and Storage July 23, 2014 - 10:00am Addthis The DOE team joins their Norwegian counterparts on a a tour of the <a href= "http://www.tcmda.com/en/">CO2 Technology Centre Mongstad project</a> – the world’s largest facility for testing and improving CO2 capture. Located just north of Bergen, this project includes a

  15. Environmental assessment of decommissioning radioisotope thermoelectric generators (RTG) in northwest Russia

    SciTech Connect (OSTI)

    Hosseini, A.; Standring, W.J.F.; Brown, J.E.; Dowdall, M.; Amundsen, I.B.

    2007-07-01

    This article presents some results from assessment work conducted as part of a joint Norwegian-Russian project to decommission radioisotope thermoelectric generators (RTG) in Northwest Russia. Potential worst case accident scenarios, based on the decommissioning procedures for RTGs, were assessed to study possible radiation effects to the environment. Close contact with exposed RTG sources will result in detrimental health effects. However, doses to marine biota from ingestion of radioactivity under the worst-case marine scenario studied were lower than threshold limits given in IAEA literature. (authors)

  16. Calculations of turbidite deposits and tsunamis from submarine landslides

    SciTech Connect (OSTI)

    Gisler, Galen R; Weaver, Robert P; Gittings, Michael L

    2009-01-01

    Great underwater landslides like Storegga off the Norwegian coast leave massive deposits on the seafloor and must produce enormous tsunamis. Such events have occurred on continental slopes worldwide, and continue to do so. Triggers for such slides include earthquakes, gas hydrate releases, and underwater volcanos. We have petformed a numerical study of such landslides using the multi-material compressible hydrocode Sage in order to understand the relationship between the rheology of the slide material, the configuration of the resulting deposits on the seafloor, and the tsunami that is produced. Instabilities in the fluid-fluid mixing between slide material and seawater produce vortices and swirls with sizes that depend on the rheology of the slide material. These dynamical features of the flow may be preserved as ridges when the sliding material finally stops. Thus studying the configuration of the ridges in prehistoric slides may give us measures of the circumstances under which the slide was initiated. As part of this study, we have also done a convergence test showing that the slide velocity is sensitive to the resolution adopted in the simulation, but that extrapolation to infinite resolution is possible, and can yield good velocities. We will present two-dimensional simulations of schematic underwater slides for our study of rheology, and a three-dimensional simulation in bathymetric conditions that resemble the pre-Storegga Norwegian margin.

  17. Fire testing: A review of past, current and future methods

    SciTech Connect (OSTI)

    White, G.C.; Shirvill, L.C.

    1995-12-31

    The philosophy and current methods of fire testing elements of construction and the associated fire protection systems are reviewed. Particular attention is paid to offshore structures and the fire hazards associated with offshore operations. Fire testing is only one aspect in the attempt to ensure that the effects of fires are understood and that effective fire protection systems are developed. The historical development of fire tests is discussed, ending with the furnace test which follows the hydrocarbon temperature versus time curve. The limitations of these tests are discussed, in particular when they are applied to offshore fire scenarios where they are not representative of the potential fire loading and conditions identified for typical platforms. The identification of the jet fire as a common fire scenario on offshore platforms, together with the criticisms made by Lord Cullen in his report on the Piper Alpha disaster, has driven the development of more realistic fire tests. Two such tests are now available and are described in the paper. Also discussed is the development of a smaller scale test that has formed the basis of the recently issued Interim Jet Fire Test Procedure, produced by a working group comprising the UK Health and Safety Executive (HSE); the Norwegian Petroleum Directorate (NPD); Lloyd`s Register; the UK Offshore Operator`s Association (UKOOA); the Norwegian Fire Research Laboratory (SINTEF NBL); the Southwest Research Institute (SwRI); Shell Research Ltd.; and British Gas Research and Technology.

  18. Air Shipment of Spent Nuclear Fuel from Romania to Russia

    SciTech Connect (OSTI)

    Igor Bolshinsky; Ken Allen; Lucian Biro; Alexander Buchelnikov

    2010-10-01

    Romania successfully completed the worlds first air shipment of spent nuclear fuel transported in Type B(U) casks under existing international laws and without shipment license special exceptions when the last Romanian highly enriched uranium (HEU) spent nuclear fuel was transported to the Russian Federation in June 2009. This air shipment required the design, fabrication, and licensing of special 20 foot freight containers and cask tiedown supports to transport the eighteen TUK 19 shipping casks on a Russian commercial cargo aircraft. The new equipment was certified for transport by road, rail, water, and air to provide multi modal transport capabilities for shipping research reactor spent fuel. The equipment design, safety analyses, and fabrication were performed in the Russian Federation and transport licenses were issued by both the Russian and Romanian regulatory authorities. The spent fuel was transported by truck from the VVR S research reactor to the Bucharest airport, flown by commercial cargo aircraft to the airport at Yekaterinburg, Russia, and then transported by truck to the final destination in a secure nuclear facility at Chelyabinsk, Russia. This shipment of 23.7 kg of HEU was coordinated by the Russian Research Reactor Fuel Return Program (RRRFR), as part of the U.S. Department of Energy Global Threat Reduction Initiative (GTRI), in close cooperation with the Rosatom State Atomic Energy Corporation and the International Atomic Energy Agency, and was managed in Romania by the National Commission for Nuclear Activities Control (CNCAN). This paper describes the planning, shipment preparations, equipment design, and license approvals that resulted in the safe and secure air shipment of this spent nuclear fuel.

  19. OSTI, US Dept of Energy, Office of Scientific and Technical Information |

    Office of Scientific and Technical Information (OSTI)

    Speeding access to science information from DOE and Beyond WorldWideScience.org Multilingual Search of Chemistry and Other Sciences ACS National Meeting Slide15 Slide16 Slide17 Slide18 Slide19 Slide20 Slide01 Slide02 Slide03 Slide04 Slide05 Slide06 Slide07 Slide08 Slide09 Slide10 Slide11 Slide12 Slide13 Slide14 Slide15 Slide15 Multilingual Translations Translating ten languages, with potential for more Arabic Chinese German Deutsch English Spanish Español French Français Japanese Korean

  20. U.S. and South Korea Sign Agreement on FutureGen Project | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy South Korea Sign Agreement on FutureGen Project U.S. and South Korea Sign Agreement on FutureGen Project June 26, 2006 - 2:34pm Addthis Korea to Participate in World's First Integrated Carbon Sequestration and Hydrogen Production Research Power Plant WASHINGTON, DC - U.S. Energy Secretary Samuel W. Bodman and South Korean Minister of Commerce, Industry & Energy, Chung Sye Kyun, today signed an agreement making South Korea the second country, after India, to join the United States

  1. X-Ray Imaging Current-Driven Magnetic Domain-Wall Motion in Nanowires

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    X-Ray Imaging Current-Driven Magnetic Domain-Wall Motion in Nanowires Print The quest to increase both computer data-storage density and the speed at which one can read and write the information remains unconsummated. One novel concept is based on the use of a local electric current to push magnetic domain walls along a thin nanowire. A German, Korean, Berkeley Lab team has used the x-ray microscope XM-1 at the ALS to demonstrate that magnetic domain walls in curved permalloy nanowires can be

  2. X-Ray Imaging Current-Driven Magnetic Domain-Wall Motion in Nanowires

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    X-Ray Imaging Current-Driven Magnetic Domain-Wall Motion in Nanowires Print The quest to increase both computer data-storage density and the speed at which one can read and write the information remains unconsummated. One novel concept is based on the use of a local electric current to push magnetic domain walls along a thin nanowire. A German, Korean, Berkeley Lab team has used the x-ray microscope XM-1 at the ALS to demonstrate that magnetic domain walls in curved permalloy nanowires can be

  3. X-Ray Imaging Current-Driven Magnetic Domain-Wall Motion in Nanowires

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    X-Ray Imaging Current-Driven Magnetic Domain-Wall Motion in Nanowires Print The quest to increase both computer data-storage density and the speed at which one can read and write the information remains unconsummated. One novel concept is based on the use of a local electric current to push magnetic domain walls along a thin nanowire. A German, Korean, Berkeley Lab team has used the x-ray microscope XM-1 at the ALS to demonstrate that magnetic domain walls in curved permalloy nanowires can be

  4. X-Ray Imaging Current-Driven Magnetic Domain-Wall Motion in Nanowires

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    X-Ray Imaging Current-Driven Magnetic Domain-Wall Motion in Nanowires Print The quest to increase both computer data-storage density and the speed at which one can read and write the information remains unconsummated. One novel concept is based on the use of a local electric current to push magnetic domain walls along a thin nanowire. A German, Korean, Berkeley Lab team has used the x-ray microscope XM-1 at the ALS to demonstrate that magnetic domain walls in curved permalloy nanowires can be

  5. X-Ray Imaging Current-Driven Magnetic Domain-Wall Motion in Nanowires

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    X-Ray Imaging Current-Driven Magnetic Domain-Wall Motion in Nanowires X-Ray Imaging Current-Driven Magnetic Domain-Wall Motion in Nanowires Print Wednesday, 26 September 2007 00:00 The quest to increase both computer data-storage density and the speed at which one can read and write the information remains unconsummated. One novel concept is based on the use of a local electric current to push magnetic domain walls along a thin nanowire. A German, Korean, Berkeley Lab team has used the x-ray

  6. LANL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Shake, Rattle, and Roll Los Alamos scientists analyze North Korea's recent "hydrogen bomb" test to determine the details-location, yield, and type-of the explosion. Around 10 a.m. Pyongyang Time on Wednesday, January 6, 2016, seismic analysts around the world picked up something unusual-a 5.1-magnitude seismic event in the northeast corner of North Korea. Earthquakes of this size aren't common on the Korean Peninsula, which likely meant the violent shaking was caused by something else:

  7. X-Ray Imaging Current-Driven Magnetic Domain-Wall Motion in Nanowires

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    X-Ray Imaging Current-Driven Magnetic Domain-Wall Motion in Nanowires Print The quest to increase both computer data-storage density and the speed at which one can read and write the information remains unconsummated. One novel concept is based on the use of a local electric current to push magnetic domain walls along a thin nanowire. A German, Korean, Berkeley Lab team has used the x-ray microscope XM-1 at the ALS to demonstrate that magnetic domain walls in curved permalloy nanowires can be

  8. X-Ray Imaging Current-Driven Magnetic Domain-Wall Motion in Nanowires

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    X-Ray Imaging Current-Driven Magnetic Domain-Wall Motion in Nanowires Print The quest to increase both computer data-storage density and the speed at which one can read and write the information remains unconsummated. One novel concept is based on the use of a local electric current to push magnetic domain walls along a thin nanowire. A German, Korean, Berkeley Lab team has used the x-ray microscope XM-1 at the ALS to demonstrate that magnetic domain walls in curved permalloy nanowires can be

  9. X-Ray Imaging Current-Driven Magnetic Domain-Wall Motion in Nanowires

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    X-Ray Imaging Current-Driven Magnetic Domain-Wall Motion in Nanowires Print The quest to increase both computer data-storage density and the speed at which one can read and write the information remains unconsummated. One novel concept is based on the use of a local electric current to push magnetic domain walls along a thin nanowire. A German, Korean, Berkeley Lab team has used the x-ray microscope XM-1 at the ALS to demonstrate that magnetic domain walls in curved permalloy nanowires can be

  10. Assessment of public perception of radioactive waste management in Korea.

    SciTech Connect (OSTI)

    Trone, Janis R.; Cho, SeongKyung; Whang, Jooho; Lee, Moo Yul

    2011-11-01

    The essential characteristics of the issue of radioactive waste management can be conceptualized as complex, with a variety of facets and uncertainty. These characteristics tend to cause people to perceive the issue of radioactive waste management as a 'risk'. This study was initiated in response to a desire to understand the perceptions of risk that the Korean public holds towards radioactive waste and the relevant policies and policy-making processes. The study further attempts to identify the factors influencing risk perceptions and the relationships between risk perception and social acceptance.

  11. Los Alamos National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Los Alamos National Laboratory Around 10 a.m. Pyongyang Time on Wednesday, January 6, 2016, seismic analysts around the world picked up something unusual-a 5.1-magnitude seismic event in the northeast corner of North Korea. Earthquakes of this size aren't common on the Korean Peninsula, which likely meant the violent shaking was caused by something else: an explosion. Enter Los Alamos National Laboratory. Los Alamos isn't just in the business of developing, testing, and maintaining explosives. A

  12. An Interoperability Testing Study: Automotive Inventory Visibility and Interoperability

    SciTech Connect (OSTI)

    Ivezic, Nenad; Kulvatunyou, Boonserm; Frechette, Simon; Jones, Albert

    2004-01-01

    This paper describes a collaborative effort between the NIST and Korean Business-to-Business Interoperability Test Beds to support a global, automotive-industry interoperability project. The purpose of the collaboration is to develop a methodology for validation of interoperable data-content standards implemented across inventory visibility tools within an internationally adopted testing framework. In this paper we describe methods (1) to help the vendors consistently implement prescribed message standards and (2) to assess compliance of those implementations with respect to the prescribed data content standards. We also illustrate these methods in support of an initial proof of concept for an international IV&I scenario.

  13. Health impact assessment in Korea

    SciTech Connect (OSTI)

    Kang, Eunjeong; Lee, Youngsoo; Harris, Patrick; Koh, Kwangwook; Kim, Keonyeop

    2011-07-15

    Recently, Health Impact Assessment has gained great attention in Korea. First, the Ministry of Environment introduced HIA within existing Environment Impact Assessment. Second, the Korea Institute for Health and Social Affairs began an HIA program in 2008 in alliance with Healthy Cities. In this short report, these two different efforts are introduced and their opportunities and challenges discussed. We believe these two approaches complement each other and both need to be strengthened. We also believe that both can contribute to the development of health in policy and project development and ultimately to improvements in the Korean population's health.

  14. ARM - Facility News Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    23, 2012 [Facility News] Swapping Science with Korean Researchers Bookmark and Share Commemorating the visit to the ARM Southern Great Plains site are (left of sign) John Schatz, SGP site operations manager, with Dr. Gyuwon Lee and daughter Sueha Lee; and (right of sign) Dr. Yeon-Hee Kim; Doug Sisterson, SGP site manager; Dr. Seungsook Shin; and Dr. Kwan-Young Chung. Commemorating the visit to the ARM Southern Great Plains site are (left of sign) John Schatz, SGP site operations manager, with

  15. Advanced Computational Thermal Fluid Physics (CTFP) and Its Assessment for Light Water Reactors and Supercritical Reactors

    SciTech Connect (OSTI)

    D.M. McEligot; K. G. Condie; G. E. McCreery; H. M. McIlroy; R. J. Pink; L.E. Hochreiter; J.D. Jackson; R.H. Pletcher; B.L. Smith; P. Vukoslavcevic; J.M. Wallace; J.Y. Yoo; J.S. Lee; S.T. Ro; S.O. Park

    2005-10-01

    Background: The ultimate goal of the study is the improvement of predictive methods for safety analyses and design of Generation IV reactor systems such as supercritical water reactors (SCWR) for higher efficiency, improved performance and operation, design simplification, enhanced safety and reduced waste and cost. The objective of this Korean / US / laboratory / university collaboration of coupled fundamental computational and experimental studies is to develop the supporting knowledge needed for improved predictive techniques for use in the technology development of Generation IV reactor concepts and their passive safety systems. The present study emphasizes SCWR concepts in the Generation IV program.

  16. Shifting the cost curve for subsea developments

    SciTech Connect (OSTI)

    Solheim, B.J.; Hestad, E.

    1995-12-31

    A steadily increasing challenge in offshore oil and gas field developments in the Norwegian part of the North Sea is to design, construct, and install offshore installations that give an acceptable return of investment Deeper water, limited reservoirs and a low, fluctuating oil price make the task even more demanding. Saga Petroleum has recently faced this challenge with its last field development project. Attention in this paper is focused on the Vigdis subsea production system. However, the considerations and cost reduction elements are valid for offshore field developments in general. The main cost reductions are obtained by: Maximum use of industry capability; Application of new organization principles; Focus on functional requirements; Shortened project execution time; Technological development. In addition this paper presents thoughts on further cost reduction possibilities for future subsea field developments.

  17. Troll Phase I pipelines: Tie-ins to the subsea tunnel

    SciTech Connect (OSTI)

    Hove, F.; Kuhlmann, H.

    1995-12-31

    Subsea approaches to the Norwegian coast are characterized by very rugged topography. Landfall of offshore pipelines therefore often require dedicated subsea tunnel and pipeline tie in concepts. To land the 36 inch and 40 inch offshore pipelines associated with the Troll Phase 1 development, a 4 km long landfall tunnel was constructed terminating at a water depth of 165 m with vertical shaft connections to the seabed. This paper describes the design of the Troll Phase 1 tie-ins of offshore to tunnel pipeline sections. These comprise two main elements, i.e. 180 Te tie-in spools -- which are installed between the offshore pipelines and the piercing shafts -- and prefabricated 450 Te riser bundles -- which are installed into the vertical tunnel piercing shafts.

  18. New flow-through mudmat design for Heidrun subsea structure

    SciTech Connect (OSTI)

    Lieng, J.T.; Bjoergen, H.P.

    1995-12-01

    Permanent or temporary subsea structures that require some initial or frequent on-bottom relocation need an effective mudmat release system. This is necessary in order to avoid problems that may arise due to pressure differences at the mudmat/soil interface. Through detail engineering work performed for the development of subsea installations at the Heidrun Field off the Norwegian coast, a novel mudmat design has been conceived that enables water to flow freely through the mudmat top without sacrificing overall stability or structural integrity. This was accomplished by integrating geotextiles and expanded steel mesh for support into the design. The design permits structure installation and removal keeping hydrodynamic forces, soil resistance and disturbance of the seabed sediments to a minimum. Hence, subsea dynamic behavior is more favorable reducing structural stresses, relocation time and the necessary lifting capacity of the surface vessel as compared to earlier solutions.

  19. Metal hydride hydrogen compression: Recent advances and future prospects

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Bowman, Jr., Robert C.; Yartys, Volodymyr A.; Lototskyy, Mykhaylo V.; Linkov, Vladimir; Grant, David; Stuart, Alastair; Eriksen, Jon; Denys, Roman

    2016-03-17

    Metal hydride (MH) thermal sorption compression is one of the more important applications of the metal hydrides. The present paper reviews recent advances in the field based on the analysis of the fundamental principles of this technology. The performances when boosting hydrogen pressure, along with two- and three-step compression units are analyzed. The paper includes also a theoretical modeling of a two-stage compressor aimed at both describing the performance of the experimentally studied systems, but, also, on their optimization and design of more advanced MH compressors. Business developments in the field are reviewed for the Norwegian company HYSTORSYS AS andmore » the South African Institute for Advanced Materials Chemistry. Finally, future prospects are outlined presenting the role of the metal hydride compression in the overall development of the hydrogen driven energy systems. Lastly, the work is based on the analysis of the development of the technology in Europe, USA and South Africa.« less

  20. Experiences from the offshore installation of a composite materials firewater system

    SciTech Connect (OSTI)

    Ciaraldi, S.W.

    1993-12-31

    A prototype 300 m composite dry deluge firewater system was installed in December 1991 at the Valhall Field in the southern North Sea Norwegian offshore sector. This installation followed successful safety verification of the explosion and fire resistant design concept consisting of glass-fiber reinforced epoxy (GRE) piping components protected with a reinforced intumescent epoxy fire insulation. The installation was based primarily on the use of prefabricated GRE piping spools and fire insulation cast onto the piping or applied in the form of cast half shells. Significant experiences gained from the project are described. These experiences involve pre-engineering activities, detailed engineering, onshore fabrication, shipping, offshore hook-up, quality assurance, safety and economics. Although the overall installation was successful and the system is functioning as intended, areas of possible optimization and cost reduction for future composite firewater systems were identified. These findings are also briefly reviewed.

  1. Offshore megaproject instrumentation needs planning

    SciTech Connect (OSTI)

    Guerrero, V.

    1986-05-05

    The design and construction of the Statfjord ''C'' drilling/production platform in the North Sea is a good example of the demands a megaproject like this can put on instrumentation activities. The huge platform is in production in the Norwegian sector of the North Sea. It is a result of modern construction techniques. Such techniques emphasize the fabrication of large modular subassemblies limited in size only by the ability to transport or lift them into position. These modules are constructed as complete as possible before being assembled and interconnected to become an integrated whole. The instrumentation distributed throughout the modules must eventually be operated and maintained as systems. Therefore, these systems should have the same types of hardware and be installed in a uniform way. This article describes the coordination of instrumentation activities required to achieve this objective in an offshore platform project that consisted of some 30 modules built at 11 construction sites in 4 countries.

  2. Fire water systems in composite materials

    SciTech Connect (OSTI)

    Sundt, J.L.

    1993-12-31

    Due to corrosion problems in fire water systems offshore there is a need for a corrosion resistant material to improve the reliability of onboard fire fighting systems. Glass Reinforced Epoxy (GRE) pipe is seen as a cost effective and light weight alternative to metals. Through a test program run by AMAT, Advanced Materials a/s in collaboration with the Norwegian Fire and Research Laboratory (NBL, SINTEF), GRE pipes have proved to be viable materials for offshore fire water systems. The test program included furnace testing, jetfire testing and simulated explosion testing. GRE pipes (2--12 inches) from two suppliers were fire tested and evaluated. Both adhesively bonded joints and flange connections were tested. During the course of the project, application methods of passive fire protection and nozzle attachments were improved.

  3. Design concept of K-DEMO for near-term implementation

    SciTech Connect (OSTI)

    Kim, K.; Im, K.; Kim, H. C.; Oh, S.; Park, J. S.; Kwon, S.; Lee, Y. S.; Yeom, J. H.; Lee, C.; Lee, G -S.; Neilson, G.; Kessel, C.; Brown, T.; Titus, P.; Mikkelsen, D.; Zhai, Y.

    2015-04-22

    A Korean fusion energy development promotion law (FEDPL) was enacted in 2007. As a following step, a conceptual design study for a steady-state Korean fusion demonstration reactor (K-DEMO) was initiated in 2012. After the thorough 0D system analysis, the parameters of the main machine characterized by the major and minor radii of 6.8 and 2.1 m, respectively, were chosen for further study. The analyses of heating and current drives were performed for the development of the plasma operation scenarios. Preliminary results on lower hybrid and neutral beam current drive are included herein. A high performance Nb₃Sn-based superconducting conductor is adopted, providing a peak magnetic field approaching 16 T with the magnetic field at the plasma centre above 7 T. Pressurized water is the prominent choice for the main coolant of K-DEMO when the balance of plant development details is considered. The blanket system adopts a ceramic pebble type breeder. Considering plasma performance, a double-null divertor is the reference configuration choice of K-DEMO. For a high availability operation, K-DEMO incorporates a design with vertical maintenance. A design concept for K-DEMO is presented together with the preliminary design parameters.

  4. Design concept of K-DEMO for near-term implementation

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Kim, K.; Im, K.; Kim, H. C.; Oh, S.; Park, J. S.; Kwon, S.; Lee, Y. S.; Yeom, J. H.; Lee, C.; Lee, G -S.; et al

    2015-04-22

    A Korean fusion energy development promotion law (FEDPL) was enacted in 2007. As a following step, a conceptual design study for a steady-state Korean fusion demonstration reactor (K-DEMO) was initiated in 2012. After the thorough 0D system analysis, the parameters of the main machine characterized by the major and minor radii of 6.8 and 2.1 m, respectively, were chosen for further study. The analyses of heating and current drives were performed for the development of the plasma operation scenarios. Preliminary results on lower hybrid and neutral beam current drive are included herein. A high performance Nb₃Sn-based superconducting conductor is adopted,more » providing a peak magnetic field approaching 16 T with the magnetic field at the plasma centre above 7 T. Pressurized water is the prominent choice for the main coolant of K-DEMO when the balance of plant development details is considered. The blanket system adopts a ceramic pebble type breeder. Considering plasma performance, a double-null divertor is the reference configuration choice of K-DEMO. For a high availability operation, K-DEMO incorporates a design with vertical maintenance. A design concept for K-DEMO is presented together with the preliminary design parameters.« less

  5. Radioactive Waste Management in Central Asia - 12034

    SciTech Connect (OSTI)

    Zhunussova, Tamara; Sneve, Malgorzata; Liland, Astrid

    2012-07-01

    After the collapse of the Soviet Union the newly independent states in Central Asia (CA) whose regulatory bodies were set up recently are facing problems with the proper management of radioactive waste and so called 'nuclear legacy' inherited from the past activities. During the former Soviet Union (SU) period, various aspects of nuclear energy use took place in CA republics of Kazakhstan, Kyrgyzstan, Tajikistan and Uzbekistan. Activities range from peaceful use of energy to nuclear testing for example at the former Semipalatinsk Nuclear Test Site (SNTS) in Kazakhstan, and uranium mining and milling industries in all four countries. Large amounts of radioactive waste (RW) have been accumulated in Central Asia and are waiting for its safe disposal. In 2008 the Norwegian Radiation Protection Authority (NRPA), with the support of the Norwegian Ministry of Foreign Affairs, has developed bilateral projects that aim to assist the regulatory bodies in Kazakhstan, Kyrgyzstan Tajikistan, and Uzbekistan (from 2010) to identify and draft relevant regulatory requirements to ensure the protection of the personnel, population and environment during the planning and execution of remedial actions for past practices and radioactive waste management in the CA countries. The participating regulatory authorities included: Kazakhstan Atomic Energy Agency, Kyrgyzstan State Agency on Environmental Protection and Forestry, Nuclear Safety Agency of Tajikistan, and State Inspectorate on Safety in Industry and Mining of Uzbekistan. The scope of the projects is to ensure that activities related to radioactive waste management in both planned and existing exposure situations in CA will be carried out in accordance with the international guidance and recommendations, taking into account the relevant regulatory practice from other countries in this area. In order to understand the problems in the field of radioactive waste management we have analysed the existing regulations through the so called 'Threat assessment' in each CA country which revealed additional problems in the existing regulatory documents beyond those described at the start of our ongoing bilateral projects in Kazakhstan, Kirgizistan Tajikistan and Uzbekistan. (authors)

  6. Acquired experience resulting from transforming a chemical installation into a nuclear one

    SciTech Connect (OSTI)

    Zamfirache, M.; Stefan, L.; Bornea, A.; Stefanescu, I.

    2015-03-15

    ICIT-Valcea has developed an experimental pilot-scale installation for tritium and deuterium separation. The main objective of this pilot was to demonstrate the water detritiation technology and to transfer this technology to the CANDU reactors of the Cernavoda nuclear power plant. The pilot-scale installation was initiated in 1992. The initial design and construction were performed similarly to chemical plants as the separation of isotopes was focused on only hydrogen and deuterium to assess feasibility. In a second phase we have begun to transform it into a nuclear facility with the aim of separating tritium. Moving to tritium separation has imposed a lot of changes. Changes consisted mainly of: -) re-design of the technological systems for nuclear material processing, applying specific codes and standards (ASME, Romanian nuclear specific pressure boundary prescriptions for code classification); -) design and implementation of new systems, classified as safety systems; -) re-design and implementation of command and control systems, complying with the requirements of reliability and maintenance required for the project promoted; -) revaluation of auxiliary systems (utilities, power supply); -) implementing radiation protection systems, including secondary barriers; -) implementing and maintaining environment operational program specific to the new nuclear plant; -) developing and conducting safety analyzes; and -) the production of specific documentation to obtain the necessary permits for construction, commissioning and operation of the plant.

  7. Romania program targets methanol and Fischer-Tropsch research

    SciTech Connect (OSTI)

    Not Available

    1987-03-01

    Currently, the chemical organic industry, the petrochemical and engine fuels industry in Romania are entirely based on hydrocarbons from oil. To reduce the oil dependence of this sector and to ensure the stipulated growth rate of 8-9%, research and development programs have been set up with a view to the diversification of raw materials. In research on hydrocarbons from alcohol conversion, three process variants are known, i.e. olefins from methanol, gasolines from methanol and a combined gasolines and aromatic hydrocarbons from methanol. The Romanian process of methanol conversion to hydrocarbons is very flexible, with all the variants mentioned being carried out in the same plant by modifying the catalysts. In research on hydrocarbons from synthesis gas a modern process is being developed for gasification of brown coal in a fluidized bed, under pressure, in the presence of oxygen and water vapors. In the field of carbon oxide hydrogenation, studies have been carried out on selective Fischer-Tropsch processes in which the reaction products are high value hydrocarbon fractions.

  8. The use of carbon stable isotope ratios in drugs characterization

    SciTech Connect (OSTI)

    Magdas, D. A. Cristea, G. Bot, A. Mirel, V.

    2013-11-13

    Isotopic Ratio Mass Spectrometry (IRMS) is an effective toll to be used for drug product authentication. The isotopic composition could be used to assist in the differentiation between batches of drugs and assist in the identification of counterfeit materials on the market. Only two factors affect the isotopic ratios in pharmaceutical components: the isotopic composition of the raw materials and the synthetic processes performed upon them. Counterfeiting of pharmaceutical drugs threatens consumer confidence in drug products companies' economical well-being. In this preliminary study, the analyzed samples consist in two types of commercially available analgesics, which were purchases from Romanian pharmacies. Differences in δ{sup 13}C between batches from −29.7 to −31.6% were observed, demonstrating that this method can be used to differentiate among individual drug batches and subsequently identify counterfeits on the market. On the other hand, carbon isotopic ratios differences among producers were recorded, the variations being between −31.3 to −34.9% for the same type of analgesic, but from different manufactures.

  9. A Comparison Study of Various Nuclear Fuel Cycle Alternatives

    SciTech Connect (OSTI)

    Kwon, Eun-ha; Ko, Won-il

    2007-07-01

    As a nation develops its nuclear strategies, it must consider various aspects of nuclear energy such as sustainability, environmental-friendliness, proliferation-resistance, economics, technologies, and so on. Like all the policy decision, however, a nuclear fuel cycle option can not be superior in all aspects; the nation must identify its top priority and accordingly evaluate all the possible nuclear fuel cycle options. For such a purpose, this paper takes four different fuel cycle options that are likely adopted by the Korean government, considering the current status of nuclear power generation and the 3. Comprehensive Nuclear Energy Promotion Plan (CNEPP) - Once-through Cycle, DUPIC Recycle, Thermal Recycle and GEN-IV Recycle. The paper then evaluates each option in terms of resource utilization and waste generation. The analysis shows that the GEN-IV Recycle appears to be most competitive from these aspects. (authors)

  10. Nuclear Instrumentation and Control Cyber Testbed Considerations – Lessons Learned

    SciTech Connect (OSTI)

    Jonathan Gray; Robert Anderson; Julio G. Rodriguez; Cheol-Kwon Lee

    2014-08-01

    Abstract: Identifying and understanding digital instrumentation and control (I&C) cyber vulnerabilities within nuclear power plants and other nuclear facilities, is critical if nation states desire to operate nuclear facilities safely, reliably, and securely. In order to demonstrate objective evidence that cyber vulnerabilities have been adequately identified and mitigated, a testbed representing a facility’s critical nuclear equipment must be replicated. Idaho National Laboratory (INL) has built and operated similar testbeds for common critical infrastructure I&C for over ten years. This experience developing, operating, and maintaining an I&C testbed in support of research identifying cyber vulnerabilities has led the Korean Atomic Energy Research Institute of the Republic of Korea to solicit the experiences of INL to help mitigate problems early in the design, development, operation, and maintenance of a similar testbed. The following information will discuss I&C testbed lessons learned and the impact of these experiences to KAERI.

  11. Modeling and simulation of consumer response to dynamic pricing.

    SciTech Connect (OSTI)

    Valenzuela, J.; Thimmapuram, P.; Kim, J (Decision and Information Sciences); (Auburn Univ.)

    2012-08-01

    Assessing the impacts of dynamic-pricing under the smart grid concept is becoming extremely important for deciding its full deployment. In this paper, we develop a model that represents the response of consumers to dynamic pricing. In the model, consumers use forecasted day-ahead prices to shift daily energy consumption from hours when the price is expected to be high to hours when the price is expected to be low while maintaining the total energy consumption as unchanged. We integrate the consumer response model into the Electricity Market Complex Adaptive System (EMCAS). EMCAS is an agent-based model that simulates restructured electricity markets. We explore the impacts of dynamic-pricing on price spikes, peak demand, consumer energy bills, power supplier profits, and congestion costs. A simulation of an 11-node test network that includes eight generation companies and five aggregated consumers is performed for a period of 1 month. In addition, we simulate the Korean power system.

  12. LLNL/LANS mission committee meeting

    SciTech Connect (OSTI)

    Burns, Michael J

    2010-12-06

    Recent events continue to show the national security imperative of the global security mission: (1) Fighting Proliferation - (a) At Yongbyon, 'a modern, industrial-scale U-enrichment facility w/2000 centrifuges' seen Nov. 2010, (b) In Iran, fueling began at Bushehr while P5+1/lran talks delayed to Dec. 2010; (2) Continuing need to support the warfighter and IC - (a) tensions on the Korean peninsula, (b) primitative IEDs a challenge in Afghanistan, (c) cyber command, (d)another Georgian smuggling event; and (3) Countering terrorisms on US soil - (a) toner cartridge bomb, (b) times square bomb, (c) christmas tree bomb. Joint Technical Operations Team (JTOT) and Accident Response Group (ARG) elements deployed to two East Coast locations in November to work a multi-weapon scenario. LANL provided 70% of on-duty field and reconstitution teams for both Marble Challenge 11-01 and JD 11-01. There were a total of 14 deployments in FY10.

  13. Review of Recent Aging-Related Degradation Occurrences of Structures and Passive Components in U.S. Nuclear Power Plants

    SciTech Connect (OSTI)

    Nie,J.; Braverman, J.; Hofmayer, C.; Choun, Y.-S.; Kim, M.K.; Choi, I.-K.

    2009-04-02

    The Korea Atomic Energy Research Institute (KAERI) and Brookhaven National Laboratory (BNL) are collaborating to develop seismic capability evaluation technology for degraded structures and passive components (SPCs) under a multi-year research agreement. To better understand the status and characteristics of degradation of SPCs in nuclear power plants (NPPs), the first step in this multi-year research effort was to identify and evaluate degradation occurrences of SPCs in U.S. NPPs. This was performed by reviewing recent publicly available information sources to identify and evaluate the characteristics of degradation occurrences and then comparing the information to the observations in the past. Ten categories of SPCs that are applicable to Korean NPPs were identified, comprising of anchorage, concrete, containment, exchanger, filter, piping system, reactor pressure vessel, structural steel, tank, and vessel. Software tools were developed to expedite the review process. Results from this review effort were compared to previous data in the literature to characterize the overall degradation trends.

  14. Development of safety analysis codes and experimental validation for a very high temperature gas-cooled reactor Final report

    SciTech Connect (OSTI)

    Chang Oh

    2006-03-01

    The very high-temperature gas-cooled reactor (VHTR) is envisioned as a single- or dual-purpose reactor for electricity and hydrogen generation. The concept has average coolant temperatures above 9000C and operational fuel temperatures above 12500C. The concept provides the potential for increased energy conversion efficiency and for high-temperature process heat application in addition to power generation. While all the High Temperature Gas Cooled Reactor (HTGR) concepts have sufficiently high temperature to support process heat applications, such as coal gasification, desalination or cogenerative processes, the VHTR’s higher temperatures allow broader applications, including thermochemical hydrogen production. However, the very high temperatures of this reactor concept can be detrimental to safety if a loss-of-coolant accident (LOCA) occurs. Following the loss of coolant through the break and coolant depressurization, air will enter the core through the break by molecular diffusion and ultimately by natural convection, leading to oxidation of the in-core graphite structure and fuel. The oxidation will accelerate heatup of the reactor core and the release of toxic gasses (CO and CO2) and fission products. Thus, without any effective countermeasures, a pipe break may lead to significant fuel damage and fission product release. Prior to the start of this Korean/United States collaboration, no computer codes were available that had been sufficiently developed and validated to reliably simulate a LOCA in the VHTR. Therefore, we have worked for the past three years on developing and validating advanced computational methods for simulating LOCAs in a VHTR. Research Objectives As described above, a pipe break may lead to significant fuel damage and fission product release in the VHTR. The objectives of this Korean/United States collaboration were to develop and validate advanced computational methods for VHTR safety analysis. The methods that have been developed are now available to provide improved understanding of the VHTR during accidents.

  15. Cadmium exposure and cardiovascular disease in the 2005 Korea National Health and Nutrition Examination Survey

    SciTech Connect (OSTI)

    Lee, Mi-Sun; Park, Sung Kyun; Hu, Howard; Department of Environmental Health Sciences, University of Michigan School of Public Health, Ann Arbor, MI ; Lee, Sundong; Department of Preventive Medicine, School of Oriental Medicine, Sangji University, Wonju, Kangwon

    2011-01-15

    Background: Limited epidemiologic data are available concerning the cardiovascular effects of cadmium exposure, although recent studies suggest associations with myocardial infarction and peripheral arterial disease. We examined the associations of cadmium exposure with cardiovascular disease in nationally representative general Korean adults. Methods: We used cross-sectional data on blood cadmium and self-reported diagnoses of ischemic heart disease (IHD), stroke, and hypertension in a sub-sample of 1908 adults, aged 20 years and older, who participated in the 2005 Korea National Health and Nutrition Examination Survey (KNHANES). We used survey logistic regression models accounting for the complex sampling design to estimate the odds ratios (OR), adjusting for age, education, income, alcohol, smoking, body mass index, waist circumference, family history of hypertension, blood pressure, and blood lead. Results: The geometric mean of blood cadmium was 1.53 {mu}g/L. After adjusting for potential confounders, an interquartile range (IQR) increase in blood cadmium (0.91 {mu}g/L) was found to be associated with an increased risk for IHD (OR 2.1, 95% confidence interval (CI) 1.3-3.4). An IQR increase in blood cadmium was found to be associated with an elevated risk for hypertension only among men (OR 1.4, 95% CI 1.1-1.8) but not among women. No association was observed with stroke in both genders. Conclusions: These findings suggest that cadmium in blood may be associated with an increased risk for IHD and hypertension in the general Korean adult population.

  16. Total outlines world exploration, production challenges, approaches

    SciTech Connect (OSTI)

    Not Available

    1992-07-27

    This paper describes the current international picture of exploration/production; expresses the most prominent challenges the author sees emerging from changing conditions, and discusses briefly how the industry can and does answer these challenges. Geologic status---first, oil and gas provinces are obviously maturing. The peak of discoveries in the U.K. North Sea is well past, and if yearly additions still appear more or less stable, this happens at the expense of a larger number of exploratory wells being drilled. This is going on with variations in a number of areas. Second, the world is shrinking in terms of new prospective basins. For instance, the Norwegian Barents Sea looked so promising a few years ago but has yet to yield a major field. The case is not unique, and everyone can make his own list of disappointments: East African rift basins, Paraguay, and so on. One article pointed out that the last decade's reserve addition from wildcat oil discoveries was down by almost 40% from additions registered during 1972-81. This excluded the USSR, Eastern Europe, China, Mexico, and a couple of Middle East countries.

  17. Strong sorption of native PAHs to pyrogenic and unburned carbonaceous geosorbents in sediments

    SciTech Connect (OSTI)

    Gerard Cornelissen; Gijs D. Breedveld; Stavros Kalaitzidis; Kimon Christanis; Anne Kibsgaard; Amy M.P. Oen

    2006-02-15

    It has recently been shown that the presence of carbonaceous geosorbents (CG, including black carbon (BC), unburned coal, and kerogen) can cause strong sorption of polycyclic aromatic hydrocarbons (PAHs) in sediments. The authors studied sorption of native PAHs in four Norwegian harbor sediments of which high fractions (21-56%) of the total organic carbon (TOC) consisted of CG carbon (CGC), as shown by organic petrography. PAH sorption coefficients were 1-2 orders of magnitude above predictions based on amorphous organic carbon partitioning alone. In recent studies, such strong sorption was attributed solely to BC sorption under the implicit assumption that sorption is linear for coal and kerogen. The most important result of the present study is that total sorption is better explained by considering all three nonlinearly sorbing CGC materials than by only considering BC. In addition, it was evaluated whether activated carbon (AC) amendments could be effective in reducing the freely dissolved porewater concentrations (C{sub W}) and thus the environmental risks of the PAHs in such strongly sorbing sediments. The results indicated that an addition of 2 weight % AC reduced the C{sub W} by factors of 21-153 for the four sediments (average values for all PAHs). It was shown that phenanthrene sorption to AC was, on average, reduced by a factor of 6 in sediment-AC mixtures compared to pure AC. 33 refs., 5 figs., 2 tabs.

  18. INTERNATIONAL COLLABORATION ON CO2 SEQUESTRATION

    SciTech Connect (OSTI)

    Howard J. Herzog; E. Eric Adams

    2005-04-01

    On December 4, 1997, the US Department of Energy (DOE), the New Energy and Industrial Technology Development Organization of Japan (NEDO), and the Norwegian Research Council (NRC) entered into a ''Project Agreement for International Collaboration on CO{sub 2} Ocean Sequestration''. Government organizations from Japan, Canada, and Australia, and a Swiss/Swedish engineering firm later joined the agreement, which outlined a research strategy for ocean carbon sequestration via direct injection. The members agreed to an initial field experiment, with the hope that if the initial experiment was successful, there would be subsequent field evaluations of increasingly larger scale to evaluate environmental impacts of sequestration and the potential for commercialization. This report is a summary of the evolution of the collaborative effort, the supporting research, and results for the International Collaboration on CO{sub 2} Ocean Sequestration. Almost 100 papers and reports resulted from this collaboration, including 18 peer reviewed journal articles, 46 papers, 28 reports, and 4 graduate theses. A full listing of these publications is in the reference section.

  19. INTERNATIONAL COLLABORATION ON CO2 SEQUESTRATION

    SciTech Connect (OSTI)

    H.J. Herzog; E.E. Adams

    1999-08-23

    The ocean represents the largest potential sink for anthropogenic CO{sub 2}. In order to better understand this potential, Japan, Norway, and the United States signed a Project Agreement for International Collaboration on CO{sub 2} Ocean Sequestration in December 1997; since that time, Canada and ABB (Switzerland) have joined the project. The objective of the project is to investigate the technical feasibility of, and improve understanding of the environmental impacts from, CO{sub 2} ocean sequestration in order to minimize the impacts associated with the eventual use of this technique to reduce greenhouse gas concentrations in the atmosphere. The project will continue through March 31, 2002, with a field experiment to take place in the summer of 2000 off the Kona Coast of Hawaii. The implementing research organizations are the Research Institute of Innovative Technology for the Earth (Japan), the Norwegian Institute for Water Research (Norway), and the Massachusetts Institute of Technology (USA). The general contractor for the project will be the Pacific International Center for High Technology Research in Hawaii. A Technical Committee has been formed to supervise the technical aspects and execution of this project. The members of this committee are the co-authors of this paper. In this paper we discuss key issues involved with the design, ocean engineering, measurements, siting, and costs of this experiment.

  20. Fuel-cell-propelled submarine-tanker-system study

    SciTech Connect (OSTI)

    Court, K E; Kumm, W H; O'Callaghan, J E

    1982-06-01

    This report provides a systems analysis of a commercial Arctic Ocean submarine tanker system to carry fossil energy to markets. The submarine is to be propelled by a modular Phosphoric Acid Fuel Cell system. The power level is 20 Megawatts. The DOE developed electric utility type fuel cell will be fueled with methanol. Oxidant will be provided from a liquid oxygen tank carried onboard. The twin screw submarine tanker design is sized at 165,000 deadweight tons and the study includes costs and an economic analysis of the transport system of 6 ships. The route will be under the polar icecap from a loading terminal located off Prudhoe Bay, Alaska to a transshipment facility postulated to be in a Norwegian fjord. The system throughput of the gas-fed methanol cargo will be 450,000 barrels per day. The total delivered cost of the methanol including well head purchase price of natural gas, methanol production, and shipping would be $25/bbl from Alaska to the US East Coast. Of this, the shipping cost is $6.80/bbl. All costs in 1981 dollars.

  1. Sexual Function in Males After Radiotherapy for Rectal Cancer

    SciTech Connect (OSTI)

    Bruheim, Kjersti, E-mail: Kjersti.bruheim@medisin.uio.n [Oslo University Hospital, Ulleval Cancer Centre, Oslo (Norway); Guren, Marianne G. [Oslo University Hospital, Ulleval Cancer Centre, Oslo (Norway); Dahl, Alv A. [Oslo University Hospital, Department of Clinical Cancer Research, the Norwegian Radium Hospital, Oslo (Norway); Faculty of Medicine, University of Oslo, Oslo (Norway); Skovlund, Eva [School of Pharmacy, University of Oslo, Oslo (Norway); Balteskard, Lise [University Hospital of Northern Norway, Tromso (Norway); Carlsen, Erik [Oslo University Hospital, Department of Gastrointestinal Surgery, Ulleval, Oslo (Norway); Fossa, Sophie D. [Oslo University Hospital, Department of Clinical Cancer Research, the Norwegian Radium Hospital, Oslo (Norway); Faculty of Medicine, University of Oslo, Oslo (Norway); Tveit, Kjell Magne [Oslo University Hospital, Ulleval Cancer Centre, Oslo (Norway); Faculty of Medicine, University of Oslo, Oslo (Norway)

    2010-03-15

    Purpose: Knowledge of sexual problems after pre- or postoperative radiotherapy (RT) with 50 Gy for rectal cancer is limited. In this study, we aimed to compare self-rated sexual functioning in irradiated (RT+) and nonirradiated (RT-) male patients at least 2 years after surgery for rectal cancer. Methods and Materials: Patients diagnosed with rectal cancer from 1993 to 2003 were identified from the Norwegian Rectal Cancer Registry. Male patients without recurrence at the time of the study. The International Index of Erectile Function, a self-rated instrument, was used to assess sexual functioning, and serum levels of serum testosterone were measured. Results: Questionnaires were returned from 241 patients a median of 4.5 years after surgery. The median age was 67 years at survey. RT+ patients (n = 108) had significantly poorer scores for erectile function, orgasmic function, intercourse satisfaction, and overall satisfaction with sex life compared with RT- patients (n = 133). In multiple age-adjusted analysis, the odds ratio for moderate-severe erectile dysfunction in RT+ patients was 7.3 compared with RT- patients (p <0.001). Furthermore, erectile dysfunction of this degree was associated with low serum testosterone (p = 0.01). Conclusion: RT for rectal cancer is associated with significant long-term effects on sexual function in males.

  2. Integrated fire analysis: Application to offshore cases

    SciTech Connect (OSTI)

    Saubestre, V.; Khalfi, J.P.; Paygnard, J.C.

    1995-12-31

    Evaluating thermal loads from different fire scenarios and then response of the structure to these loads covers several fields. It is also difficult and time consuming to implement. Interfaces are necessary between the heat calculation, transient propagation and structural analysis software packages. Nevertheless, it is necessary to design structures to accommodate heat loads in order to meet safety requirements or functional specification. Elf, along with several operators and organizations, have sponsored a research project on this topic. The project, managed by SINTEF NBL (Norwegian Fire Research Laboratory), has delivered an integrated fire analysis software package which can be used to address design-to-fire-related issues in various contexts. The core modules of the integrated package are robust, well validated analysis tools. This paper describes some benefits (technical or cost related) of using an integrated approach to assess the response of a structure to thermal loads. Three examples are described: consequence of an accidental scenario on the living quarters in an offshore complex, necessity for the reinforcement of a flareboom following a change in process, evaluation of the amount of insulation needed for a topside process primary structure. The paper focuses on the importance for the operator to have a practical tool which can lead to substantial cost saving while reducing the uncertainty linked to safety issues.

  3. Technical Aspects Regarding the Management of Radioactive Waste from Decommissioning of Nuclear Facilities

    SciTech Connect (OSTI)

    Dragolici, F.; Turcanu, C. N.; Rotarescu, G.; Paunica, I.

    2003-02-25

    The proper application of the nuclear techniques and technologies in Romania started in 1957, once with the commissioning of the Research Reactor VVR-S from IFIN-HH-Magurele. During the last 45 years, appear thousands of nuclear application units with extremely diverse profiles (research, biology, medicine, education, agriculture, transport, all types of industry) which used different nuclear facilities containing radioactive sources and generating a great variety of radioactive waste during the decommissioning after the operation lifetime is accomplished. A new aspect appears by the planning of VVR-S Research Reactor decommissioning which will be a new source of radioactive waste generated by decontamination, disassembling and demolition activities. By construction and exploitation of the Radioactive Waste Treatment Plant (STDR)--Magurele and the National Repository for Low and Intermediate Radioactive Waste (DNDR)--Baita, Bihor county, in Romania was solved the management of radioactive wastes arising from operation and decommissioning of small nuclear facilities, being assured the protection of the people and environment. The present paper makes a review of the present technical status of the Romanian waste management facilities, especially raising on treatment capabilities of ''problem'' wastes such as Ra-266, Pu-238, Am-241 Co-60, Co-57, Sr-90, Cs-137 sealed sources from industrial, research and medical applications. Also, contain a preliminary estimation of quantities and types of wastes, which would result during the decommissioning project of the VVR-S Research Reactor from IFIN-HH giving attention to some special category of wastes like aluminum, graphite and equipment, components and structures that became radioactive through neutron activation. After analyzing the technical and scientific potential of STDR and DNDR to handle big amounts of wastes resulting from the decommissioning of VVR-S Research Reactor and small nuclear facilities, the necessity of up-gradation of these nuclear objectives before starting the decommissioning plan is revealed. A short presentation of the up-grading needs is also presented.

  4. AIR SHIPMENT OF HIGHLY ENRICHED URANIUM SPENT NUCLEAR FUEL FROM ROMANIA AND LIBYA

    SciTech Connect (OSTI)

    Christopher Landers; Igor Bolshinsky; Ken Allen; Stanley Moses

    2010-07-01

    In June 2009 Romania successfully completed the worlds first air shipment of highly enriched uranium (HEU) spent nuclear fuel transported in Type B(U) casks under existing international laws and without special exceptions for the air transport licenses. Special 20-foot ISO shipping containers and cask tiedown supports were designed to transport Russian TUK 19 shipping casks for the Romanian air shipment and the equipment was certified for all modes of transport, including road, rail, water, and air. In December 2009 Libya successfully used this same equipment for a second air shipment of HEU spent nuclear fuel. Both spent fuel shipments were transported by truck from the originating nuclear facilities to nearby commercial airports, were flown by commercial cargo aircraft to a commercial airport in Yekaterinburg, Russia, and then transported by truck to their final destinations at the Production Association Mayak facility in Chelyabinsk, Russia. Both air shipments were performed under the Russian Research Reactor Fuel Return Program (RRRFR) as part of the U.S. National Nuclear Security Administration (NNSA) Global Threat Reduction Initiative (GTRI). The Romania air shipment of 23.7 kg of HEU spent fuel from the VVR S research reactor was the last of three HEU fresh and spent fuel shipments under RRRFR that resulted in Romania becoming the 3rd RRRFR participating country to remove all HEU. Libya had previously completed two RRRFR shipments of HEU fresh fuel so the 5.2 kg of HEU spent fuel air shipped from the IRT 1 research reactor in December made Libya the 4th RRRFR participating country to remove all HEU. This paper describes the equipment, preparations, and license approvals required to safely and securely complete these two air shipments of spent nuclear fuel.

  5. Hyundai Avante LPi hybrid level 1 testing report.

    SciTech Connect (OSTI)

    Rask, E.; Bocci, D.; Duoba, M.; Lohse-Busch, H.

    2012-02-07

    In collaboration with the Korea Automotive Technology Institute (KATECH), the Korean market only Hyundai Avante LPi Hybrid was purchased and imported to ANL's Advanced Powertrain Research Facility for vehicle-level testing. Data was acquired during testing using non-intrusive sensors, vehicle network information, and facilities equipment (emissions and dynamometer). Standard drive cycles, performance cycles, steady-state cycles, and A/C usage cycles were conducted. The major results are shown in this report. Given the benchmark nature of this assessment, the majority of the testing was done over standard regulatory cycles and sought to obtain a general overview of how the vehicle performs. These cycles include the US FTP cycle (Urban) and Highway Fuel Economy Test cycle as well as the US06, a more aggressive supplemental regulatory cycle. To assess the impacts of more aggressive driving, the LA92 cycle and a UDDS scaled by a factor 1.2x cycles were also included in the testing plan. Data collection for this testing was kept at a fairly high level and includes emissions and fuel measurements from an exhaust emissions bench, high-voltage and accessory current/voltage from a DC power analyzer, and CAN bus data such as engine speed. The following sections will seek to explain some of the basic operating characteristics of the Avante LPi Hybrid and provide insight into unique features of its operation and design. Figure 1 shows the test vehicle in Argonne's soak room.

  6. ECONOMIC ASSESSMENT ON VITRIFICATION FACILITY OF LOW-AND INTERMEDIATE-LEVEL RADIOACTIVE WASTES IN KOREA

    SciTech Connect (OSTI)

    Kim, Sung Il; Lee, Kun Jai; Ji, Pyung Kook; Park, Jong Kil; Ha, Jong Hyun; Song, Myung Jae

    2003-02-27

    The usefulness of vitrification technology for low-and intermediate-level radioactive wastes was demonstrated with high volume reduction capability and good mechanical and chemical stability of final waste forms, and commercial vitrification facility is expected to be constructed at Ulchin site of Korean Nuclear Power Plant Ulchin Unit 5 and 6. Hence, overall economic assessment was necessary to find out the economic advantage of the vitrification facility and to predict the construction and operation costs of the facility on the preliminary bases. Additionally, the generation characteristics of radioactive wastes were investigated. The results of the cost analysis showed that the disposal cost of radioactive wastes treated by vitrification facility reduced to 85 percent compared with that by current waste treatment system. And the present worth analysis was performed through the cost-benefit analysis method for the commercial vitrification facility. The results showed that the vitrification facility combining cold crucible melter (CCM) for treatment of combustible DAW, spent resin, and borated liquid waste concentrate and plasma torch melter (PTM) for non-combustible DAW and spent filter is more economical than current waste treatment system when the escalation rate of disposal cost of more than 10 percent per year was applied.

  7. Workload Characterization and Performance Implications of Large-Scale Blog Servers

    SciTech Connect (OSTI)

    Jeon, Myeongjae; Kim, Youngjae; Hwang, Jaeho; Lee, Joonwon; Seo, Euiseong

    2012-01-01

    With the ever-increasing popularity of social network services (SNSs), an understanding of the characteristics of these services and their effects on the behavior of their host servers is critical. However, there has been a lack of research on the workload characterization of servers running SNS applications such as blog services. To fill this void, we empirically characterized real-world web server logs collected from one of the largest South Korean blog hosting sites for 12 consecutive days. The logs consist of more than 96 million HTTP requests and 4.7 TB of network traffic. Our analysis reveals the followings: (i) The transfer size of non-multimedia files and blog articles can be modeled using a truncated Pareto distribution and a log-normal distribution, respectively; (ii) User access for blog articles does not show temporal locality, but is strongly biased towards those posted with image or audio files. We additionally discuss the potential performance improvement through clustering of small files on a blog page into contiguous disk blocks, which benefits from the observed file access patterns. Trace-driven simulations show that, on average, the suggested approach achieves 60.6% better system throughput and reduces the processing time for file access by 30.8% compared to the best performance of the Ext4 file system.

  8. Development of an Integrated Natural Barrier Database System for Site Evaluation of a Deep Geologic Repository in Korea - 13527

    SciTech Connect (OSTI)

    Jung, Haeryong; Lee, Eunyong; Jeong, YiYeong; Lee, Jeong-Hwan

    2013-07-01

    Korea Radioactive-waste Management Corporation (KRMC) established in 2009 has started a new project to collect information on long-term stability of deep geological environments on the Korean Peninsula. The information has been built up in the integrated natural barrier database system available on web (www.deepgeodisposal.kr). The database system also includes socially and economically important information, such as land use, mining area, natural conservation area, population density, and industrial complex, because some of this information is used as exclusionary criteria during the site selection process for a deep geological repository for safe and secure containment and isolation of spent nuclear fuel and other long-lived radioactive waste in Korea. Although the official site selection process has not been started yet in Korea, current integrated natural barrier database system and socio-economic database is believed that the database system will be effectively utilized to narrow down the number of sites where future investigation is most promising in the site selection process for a deep geological repository and to enhance public acceptance by providing readily-available relevant scientific information on deep geological environments in Korea. (authors)

  9. In-vessel Retention Strategy for High Power Reactors - K-INERI Final Report (includes SBLB Test Results for Task 3 on External Reactor Vessel Cooling (ERVC) Boiling Data and CHF Enhancement Correlations)

    SciTech Connect (OSTI)

    F. B. Cheung; J. Yang; M. B. Dizon; J. Rempe

    2005-01-01

    In-vessel retention (IVR) of core melt is a key severe accident management strategy adopted by some operating nuclear power plants and proposed for some advanced light water reactors (ALWRs). If there were inadequate cooling during a reactor accident, a significant amount of core material could become molten and relocate to the lower head of the reactor vessel, as happened in the Three Mile Island Unit 2 (TMI-2) accident. If it is possible to ensure that the vessel head remains intact so that relocated core materials are retained within the vessel, the enhanced safety associated with these plants can reduce concerns about containment failure and associated risk. For example, the enhanced safety of the Westinghouse Advanced 600 MWe PWR (AP600), which relied upon External Reactor Vessel Cooling (ERVC) for IVR, resulted in the U.S. Nuclear Regulatory Commission (US NRC) approving the design without requiring certain conventional features common to existing LWRs. However, it is not clear that currently proposed external reactor vessel cooling (ERVC) without additional enhancements could provide sufficient heat removal for higher-power reactors (up to 1500 MWe). Hence, a collaborative, three-year, U.S. - Korean International Nuclear Energy Research Initiative (INERI) project was completed in which the Idaho National Engineering and Environmental Laboratory (INEEL), Seoul National University (SNU), Pennsylvania State University (PSU), and the Korea Atomic Energy Research Institute (KAERI) investigated the performance of ERVC and an in-vessel core catcher (IVCC) to determine if IVR is feasible for reactors up to 1500 MWe.

  10. The application of Plant Reliability Data Information System (PRINS) to CANDU reactor

    SciTech Connect (OSTI)

    Hwang, S. W.; Lim, Y. H.; Park, H. C.

    2012-07-01

    As risk-informed applications (RIAs) are actively implanted in the nuclear industry, an issue associated with technical adequacy of Probabilistic Safety Assessment (PSA) arises in its modeling and data sourcing. In Korea, PSA for all Korean NPPs has been completed and KHNP(Korea Hydro and Nuclear Power Plant Company) developed the database called the Plant Reliability Data Information System (PRinS). It has several characteristics that distinguish it from other database system such as NPRDs (INPO,1994), PRIS (IAEA), and SRDF (EdF). This database has the function of systematic data management such as automatic data-gathering, periodic data deposition and updating, statistical analysis including Bayesian method, and trend analysis of failure rate or unavailability. In recent PSA for CANDU reactor, the component failure data of EPRI ALWR URD and Component Reliability Database were preferentially used as generic data set. The error factor for most component failure data was estimated by using the information NUREG/CR-4550 and NUREG/CR-4639. Also, annual trend analysis was performed for the functional losses of components using the statistical analysis and chart module of PRinS. Furthermore, the database has been updated regularly and maintained as a living program to reflect the current status. This paper presents the failure data analysis using PRinS which provides Bayesian analysis on main components in the CANDU reactor. (authors)

  11. Condition monitoring through advanced sensor and computational technology : final report (January 2002 to May 2005).

    SciTech Connect (OSTI)

    Kim, Jung-Taek; Luk, Vincent K.

    2005-05-01

    The overall goal of this joint research project was to develop and demonstrate advanced sensors and computational technology for continuous monitoring of the condition of components, structures, and systems in advanced and next-generation nuclear power plants (NPPs). This project included investigating and adapting several advanced sensor technologies from Korean and US national laboratory research communities, some of which were developed and applied in non-nuclear industries. The project team investigated and developed sophisticated signal processing, noise reduction, and pattern recognition techniques and algorithms. The researchers installed sensors and conducted condition monitoring tests on two test loops, a check valve (an active component) and a piping elbow (a passive component), to demonstrate the feasibility of using advanced sensors and computational technology to achieve the project goal. Acoustic emission (AE) devices, optical fiber sensors, accelerometers, and ultrasonic transducers (UTs) were used to detect mechanical vibratory response of check valve and piping elbow in normal and degraded configurations. Chemical sensors were also installed to monitor the water chemistry in the piping elbow test loop. Analysis results of processed sensor data indicate that it is feasible to differentiate between the normal and degraded (with selected degradation mechanisms) configurations of these two components from the acquired sensor signals, but it is questionable that these methods can reliably identify the level and type of degradation. Additional research and development efforts are needed to refine the differentiation techniques and to reduce the level of uncertainties.

  12. Lithospheric Thickness Modeled from Long Period Surface Wave Dispersion

    SciTech Connect (OSTI)

    Pasyanos, M E

    2008-05-15

    The behavior of surface waves at long periods is indicative of subcrustal velocity structure. Using recently published dispersion models, we invert surface wave group velocities for lithospheric structure, including lithospheric thickness, over much of the Eastern Hemisphere, encompassing Eurasia, Africa, and the Indian Ocean. Thicker lithosphere under Precambrian shields and platforms are clearly observed, not only under the large cratons (West Africa, Congo, Baltic, Russia, Siberia, India), but also under smaller blocks like the Tarim Basin and Yangtze craton. In contrast, it is found that remobilized Precambrian structures like the Saharan Shield and Sino-Korean Paraplatform do not have well-established lithospheric keels. The thinnest lithospheric thickness is found under oceanic and continental rifts, as well as along convergence zones. We compare our results to thermal models of continental lithosphere, lithospheric cooling models of oceanic lithosphere, lithosphere-asthenosphere boundary (LAB) estimates from S-wave receiver functions, and velocity variations of global tomography models. In addition to comparing results for the broad region, we examine in detail the regions of Central Africa, Siberia, and Tibet. While there are clear differences in the various estimates, overall the results are generally consistent. Inconsistencies between the estimates may be due to a variety of reasons including lateral and depth resolution differences and the comparison of what may be different lithospheric features.

  13. Long-term anaerobic digestion of food waste stabilized by trace elements

    SciTech Connect (OSTI)

    Zhang Lei; Jahng, Deokjin

    2012-08-15

    Highlights: Black-Right-Pointing-Pointer Korean food waste was found to contain low level of trace elements. Black-Right-Pointing-Pointer Stable anaerobic digestion of food waste was achieved by adding trace elements. Black-Right-Pointing-Pointer Iron played an important role in anaerobic digestion of food waste. Black-Right-Pointing-Pointer Cobalt addition further enhanced the process performance in the presence of iron. - Abstract: The purpose of this study was to examine if long-term anaerobic digestion of food waste in a semi-continuous single-stage reactor could be stabilized by supplementing trace elements. Contrary to the failure of anaerobic digestion of food waste alone, stable anaerobic digestion of food waste was achieved for 368 days by supplementing trace elements. Under the conditions of OLR (organic loading rates) of 2.19-6.64 g VS (volatile solid)/L day and 20-30 days of HRT (hydraulic retention time), a high methane yield (352-450 mL CH{sub 4}/g VS{sub added}) was obtained, and no significant accumulation of volatile fatty acids was observed. The subsequent investigation on effects of individual trace elements (Co, Fe, Mo and Ni) showed that iron was essential for maintaining stable methane production. These results proved that the food waste used in this study was deficient in trace elements.

  14. Generating unstructured nuclear reactor core meshes in parallel

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Jain, Rajeev; Tautges, Timothy J.

    2014-10-24

    Recent advances in supercomputers and parallel solver techniques have enabled users to run large simulations problems using millions of processors. Techniques for multiphysics nuclear reactor core simulations are under active development in several countries. Most of these techniques require large unstructured meshes that can be hard to generate in a standalone desktop computers because of high memory requirements, limited processing power, and other complexities. We have previously reported on a hierarchical lattice-based approach for generating reactor core meshes. Here, we describe efforts to exploit coarse-grained parallelism during reactor assembly and reactor core mesh generation processes. We highlight several reactor coremore » examples including a very high temperature reactor, a full-core model of the Korean MONJU reactor, a ¼ pressurized water reactor core, the fast reactor Experimental Breeder Reactor-II core with a XX09 assembly, and an advanced breeder test reactor core. The times required to generate large mesh models, along with speedups obtained from running these problems in parallel, are reported. A graphical user interface to the tools described here has also been developed.« less

  15. Chemical Explosion Experiments to Improve Nuclear Test Monitoring [Developing a New Paradigm for Nuclear Test Monitoring with the Source Physics Experiments (SPE)

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Snelson, Catherine M.; Abbott, Robert E.; Broome, Scott T.; Mellors, Robert J.; Patton, Howard J.; Sussman, Aviva J.; Townsend, Margaret J.; Walter, William R.

    2013-07-02

    A series of chemical explosions, called the Source Physics Experiments (SPE), is being conducted under the auspices of the U.S. Department of Energy’s National Nuclear Security Administration (NNSA) to develop a new more physics-based paradigm for nuclear test monitoring. Currently, monitoring relies on semi-empirical models to discriminate explosions from earthquakes and to estimate key parameters such as yield. While these models have been highly successful monitoring established test sites, there is concern that future tests could occur in media and at scale depths of burial outside of our empirical experience. This is highlighted by North Korean tests, which exhibit poormore » performance of a reliable discriminant, mb:Ms (Selby et al., 2012), possibly due to source emplacement and differences in seismic responses for nascent and established test sites. The goal of SPE is to replace these semi-empirical relationships with numerical techniques grounded in a physical basis and thus applicable to any geologic setting or depth.« less

  16. Analysis of In-Vessel Late Phase Melt Progression Using SCDAP/RELAP5/MOD3.3

    SciTech Connect (OSTI)

    Park, R.J.; Kim, S.B.; Kim, H.D. [Korea Atomic Energy Research Institute, Yuseong, P.O.Box 105, Daejeon, 305-600 (Korea, Republic of)

    2004-07-01

    High-pressure in-vessel melt progressions of the KSNP (Korean Standard Nuclear Power Plant) have been analyzed using the SCDAP/RELAP5/MOD3.3 computer code. The total loss of feed water (LOFW) to the steam generators with/without intentional RCS depressurization using the safety depressurization system (SDS) and the station blackout (SBO) have been simulated from transient initiation to reactor vessel failure. The SCDAP/RELAP5/MOD3.3 results have shown that the pressure boundary of the reactor coolant system did not fail before reactor vessel failure in the high-pressure sequences of the LOFW and the SBO transients of the KSNP. In all the high-pressure transients, approximately 20-30 % of the core material was melted and relocated to the lower plenum of the reactor vessel at the time of reactor vessel failure. Intentional RCS depressurization using the SDS for the total LOFW delays reactor vessel failure for approximately 5 hours by actuation of the safety injection tanks. At the time of reactor vessel failure, approximately 50-60 % of the fuel rod cladding was oxidized for the total LOFW and the SBO transients of the KSNP. (authors)

  17. Construction of Industrial Electron Beam Plant for Wastewater Treatment

    SciTech Connect (OSTI)

    Han, B.; Kim, J.; Kim, Y.; Kim, S.; Lee, M.; Choi, J.; Ahn, S.; Makarov, I.E.; Ponomarev, A.V.

    2004-10-06

    A pilot plant for treating 1,000 m3/day of dyeing wastewater with e-beam has been constructed and operated since 1998 in Daegu, Korea together with the biological treatment facility. The wastewater from various stages of the existing purification process has been treated with electron beam in this plant, and it gave rise to elaborate the optimal technology of the electron beam treatment of wastewater with increased reliability at instant changes in the composition of wastewater. Installation of the e-beam pilot plant resulted in decolorizing and destructive oxidation of organic impurities in wastewater, appreciable to reduction of chemical reagent consumption, in reduction of the treatment time, and in increase in flow rate limit of existing facilities by 30-40%. Industrial plant for treating 10,000 m3/day, based upon the pilot experimental result, is under construction and will be finished by 2005. This project is supported by the International Atomic Energy Agency (IAEA) and Korean Government.

  18. Pulmonary function and respiratory symptoms of school children exposed to ambient air pollution

    SciTech Connect (OSTI)

    Kim, Yoon Shin; Ko, Ung Ring

    1996-12-31

    This study was undertaken to evaluate the health effect of air pollution on pulmonary function and respiratory symptoms of Korean school children between 7 and 10 years of age during November 1995-January 1996. A standard respiratory symptom questionnaire was administered and spirometry was performed to examine pulmonary function of 121 children in an urban polluted area, Seoul, and of 119 children in non-polluted area, Sokcho, respectively. There was significant difference in the level of pulmonary function [forced expiratory volume in second (FEV{sub 1.0}) and forced vital capacity (FVC)] between exposed groups to polluted area and non-polluted area. Parental smoking was significantly related to respiratory symptoms of cough, phlegm, and the level of pulmonary function. The observed changes in FEV{sub 1.0} and FVC seemed to relate to home cooking fuel, not to respiratory symptoms. The additional longitudinal work that carefully monitors ambient and indoor air pollution and health effects data should be conducted to confirm these results.

  19. Impacts of a high-burnup spent fuel on a geological disposal system design

    SciTech Connect (OSTI)

    Cho, D.K.; Lee, Y.; Lee, J.Y.; Choi, H.J.; Choi, J.W. [Korea Atomic Energy Research Institute, Yuseong-gu, Daejeon-city (Korea, Republic of)

    2007-07-01

    The influence of a burnup increase of a spent nuclear fuel on a deep geological disposal system was evaluated in this study. First, the impact of a burnup increase on each aspect related to thermal and nuclear safety concerns was quantified. And then, the tunnel length, excavation volume, and the raw materials for a cast insert, copper, bentonite, and backfill needed to constitute a disposal system were comprehensively analyzed based on the spent fuel inventory to generate 1 Terawatt-year (TWa), to establish the overall effects and consequences on a geological disposal. As a result, impact of a burnup increase on the criticality safety and radiation shielding was shown to be negligible. The disposal area, however, is considerably affected because of a higher thermal load. And, it is reasonable to use a canister such as the Korean Reference Disposal Canister (KDC-1) containing 4 spent fuels up to 50 GWD/MtU, and to use a canister containing 3 spent fuels beyond 50 GWD/MtU. Although a considerable increased, 33 % in the tunnel length and 30 % in the excavation volume, was observed as the burnup increases from 50 to 60 GWD/MtU, because a decrease in the canister needs can offset an increase in the excavation volume, it can be concluded that a burnup increase of a spent fuel is not a critical concern for a geological disposal of a spent fuel. (authors)

  20. Magnetic structure and nonthermal electrons in the X6.9 flare on 2011 August 9

    SciTech Connect (OSTI)

    Hwangbo, Jung-Eun; Lee, Dae-Young; Lee, Jeongwoo; Park, Sung-Hong; Kim, Sujin; Bong, Su-Chan; Kim, Yeon-Han; Cho, Kyung-Suk; Park, Young-Deuk

    2014-12-01

    The 2011 August 9 flare is one of the largest X-ray flares of sunspot cycle 24, but spatial information is rather limited due to its position close to the western limb. This paper presents information about the location of high-energy electrons derived from hard X-ray and microwave spectra obtained with the Reuven Ramaty High-Energy Solar Spectroscopic Imager (RHESSI) and the Korean Solar Radio Burst Locator (KSRBL), respectively. The KSRBL microwave spectrum shows significant fluxes at low frequencies, implying that the high-energy electrons reside in a coronal volume highly concentrated at strong magnetic fields, and rapidly expanding with decreasing magnetic fields. After a simple modeling of the microwave spectrum, we found that the microwave source should be located above the inner pair of magnetic poles in a large quadrupolar configuration. The time-dependent evolution of the magnetic field distribution and total nonthermal energy derived from the microwave spectra is also consistent with the standard picture of multiple magnetic reconnections recurring at a magnetic null point that forms above the magnetic quadrupoles and moves up with time.

  1. Electrochemical/Pyrometallurgical Waste Stream Processing and Waste Form Fabrication

    SciTech Connect (OSTI)

    Steven Frank; Hwan Seo Park; Yung Zun Cho; William Ebert; Brian Riley

    2015-07-01

    This report summarizes treatment and waste form options being evaluated for waste streams resulting from the electrochemical/pyrometallurgical (pyro ) processing of used oxide nuclear fuel. The technologies that are described are South Korean (Republic of Korea – ROK) and United States of America (US) ‘centric’ in the approach to treating pyroprocessing wastes and are based on the decade long collaborations between US and ROK researchers. Some of the general and advanced technologies described in this report will be demonstrated during the Integrated Recycle Test (IRT) to be conducted as a part of the Joint Fuel Cycle Study (JFCS) collaboration between US Department of Energy (DOE) and ROK national laboratories. The JFCS means to specifically address and evaluated the technological, economic, and safe guard issues associated with the treatment of used nuclear fuel by pyroprocessing. The IRT will involve the processing of commercial, used oxide fuel to recover uranium and transuranics. The recovered transuranics will then be fabricated into metallic fuel and irradiated to transmutate, or burn the transuranic elements to shorter lived radionuclides. In addition, the various process streams will be evaluated and tested for fission product removal, electrolytic salt recycle, minimization of actinide loss to waste streams and waste form fabrication and characterization. This report specifically addresses the production and testing of those waste forms to demonstrate their compatibility with treatment options and suitability for disposal.

  2. Generating unstructured nuclear reactor core meshes in parallel

    SciTech Connect (OSTI)

    Jain, Rajeev; Tautges, Timothy J.

    2014-10-24

    Recent advances in supercomputers and parallel solver techniques have enabled users to run large simulations problems using millions of processors. Techniques for multiphysics nuclear reactor core simulations are under active development in several countries. Most of these techniques require large unstructured meshes that can be hard to generate in a standalone desktop computers because of high memory requirements, limited processing power, and other complexities. We have previously reported on a hierarchical lattice-based approach for generating reactor core meshes. Here, we describe efforts to exploit coarse-grained parallelism during reactor assembly and reactor core mesh generation processes. We highlight several reactor core examples including a very high temperature reactor, a full-core model of the Korean MONJU reactor, a ¼ pressurized water reactor core, the fast reactor Experimental Breeder Reactor-II core with a XX09 assembly, and an advanced breeder test reactor core. The times required to generate large mesh models, along with speedups obtained from running these problems in parallel, are reported. A graphical user interface to the tools described here has also been developed.

  3. New Small Hydropower Technology to be Deployed in the United States

    SciTech Connect (OSTI)

    Hadjerioua, Boualem; Opsahl, Egil; Gordon, Jim; Bishop, Norm

    2012-01-01

    Earth By Design Inc, (EBD), in collaboration with Oak Ridge National Laboratory (ORNL), Knight Pi sold and Co., and CleanPower AS, has responded to a Funding Opportunity Announcement (FOA) published by the Department of Energy (DOE) in April 2011. EBD submitted a proposal to install an innovative, small hydropower technology, the Turbinator, a Norwegian technology from CleanPower. The Turbinator combines an axial flow, fixed-blade Kaplan turbine and generator in a compact and sealed machine. This makes it a very simple and easy technology to be deployed and installed. DOE has awarded funding for this two-year project that will be implemented in Culver, Oregon. ORNL with the collaboration of CleanPower, will assess and evaluate the technology before and during the manufacturing phase and produce a full report to DOE. The goal of this phase-one report is to provide DOE Head Quarters (HQ), water power program management, a report with findings about the performance, readiness, capability, strengths and weakness, limitation of the technology, and potential full-scale deployment and application in the United States. Because of the importance of this information to the conventional hydropower industry and regulators, preliminary results will rapidly be distributed in the form of conference presentations, ORNL/DOE technical reports (publically available online, and publications in the peer-reviewed, scientific literature. These reports will emphasize the relevance of the activities carried out over the two-year study (i.e., performance, robustness, capabilities, reliability, and cost of the Turbinator). A final report will be submitted to a peer-reviewed publication that conveys the experimental findings and discusses their implications for the Turbinator application and implementation. Phase-two of the project consists of deployment, construction, and project operations. A detailed report on assessment and the performance of the project will be presented and communicated to DOE and published by ORNL.

  4. Cenozoic stratigraphic evolution, North Sea and Labrador Sea

    SciTech Connect (OSTI)

    Gradstein, F.M.; Grant, A.C.; Mudford, B.S. ); Berggren, W.A. ); Kaminski, M.A. ); D'Lorio, M.A. ); Cloetingh, S. ); Griffiths, C.M. )

    1990-05-01

    The authors are studying Cenozoic correlation patterns, burial trends, and subsidence history of the Central North Sea, Labrador, and Orphan basins. The authors objectives are (1) to detail intraregional mid-high latitude biozonations using noise filtering and probabilistic zonation techniques; (2) to detail paleobathymetric trends from basin margins to centers; (3) to apply this knowledge to model basin evolution, in the perspective of the evolving North Atlantic Ocean; (4) to evaluate causes for the occurrence of major hiatuses and rapid changes of subsidence; and (5) to relate rapid changes in sedimentation in the last few millions of years to model observed undercompaction trends. Cenozoic microfossil assemblages in these basins are similar, related to similarities in sedimentary and paleoeceanographic conditions. In more basinal wells, flysch-type agglutinated foraminiferal assemblages occur, also known from Carpathians, Trinidad, and Moroccan foredeeps. Over 90% of agglutinated taxa are common between these basins, although local stratigraphic ranges vary sufficiently to rely on the concept of average ranges, rather than total ones for correlations. Cenozoic stratigraphic resolution in the North Sea and Labrador basins generally is in 3-5-Ma units. and paleobathymetric zonations define a minimum of five niches, from inner shelf to middle slope regimes. Significant hiatuses occurred in the late Eocene through the Miocene, particularly in northern Labrador and northern North Sea. Subsidence in the Labrador/Grand Banks passive margin half grabens was strongly influenced by Labrador Sea opening between anomalies 34 (Campanian) and 13 (early Oligocene), when subsidence exceeded sedimentation and bathyal conditions prevailed along the margin. Thermally induced subsidence in the central North Sea grabens was considerable in the late Paleocene, when the Norwegian Sea started to open.

  5. TIME-LAPSE SEISMIC MODELING & INVERSION OF CO2 SATURATION FOR SEQUESTRATION AND ENHANCED OIL RECOVERY

    SciTech Connect (OSTI)

    Mark A. Meadows

    2006-03-31

    Injection of carbon dioxide (CO2) into subsurface aquifers for geologic storage/sequestration, and into subsurface hydrocarbon reservoirs for enhanced oil recovery, has become an important topic to the nation because of growing concerns related to global warming and energy security. In this project we developed new ways to predict and quantify the effects of CO2 on seismic data recorded over porous reservoir/aquifer rock systems. This effort involved the research and development of new technology to: (1) Quantitatively model the rock physics effects of CO2 injection in porous saline and oil/brine reservoirs (both miscible and immiscible). (2) Quantitatively model the seismic response to CO2 injection (both miscible and immiscible) from well logs (1D). (3) Perform quantitative inversions of time-lapse 4D seismic data to estimate injected CO2 distributions within subsurface reservoirs and aquifers. This work has resulted in an improved ability to remotely monitor the injected CO2 for safe storage and enhanced hydrocarbon recovery, predict the effects of CO2 on time-lapse seismic data, and estimate injected CO2 saturation distributions in subsurface aquifers/reservoirs. We applied our inversion methodology to a 3D time-lapse seismic dataset from the Sleipner CO2 sequestration project, Norwegian North Sea. We measured changes in the seismic amplitude and traveltime at the top of the Sleipner sandstone reservoir and used these time-lapse seismic attributes in the inversion. Maps of CO2 thickness and its standard deviation were generated for the topmost layer. From this information, we estimated that 7.4% of the total CO2 injected over a five-year period had reached the top of the reservoir. This inversion approach could also be applied to the remaining levels within the anomalous zone to obtain an estimate of the total CO2 injected.

  6. European MSc Programs in Nuclear Sciences - To meet the Need of Stakeholders

    SciTech Connect (OSTI)

    Salbu, Brit; Skipperud, Lindis; Priest, Nick; Garelick, Hemda; Tamponnet, Christian; Mitchell, Peter

    2009-08-19

    A stakeholder needs assessment, carried out under the EU-EURAC and EU-ENEN II projects, clearly showed that, at the European level, there are a significant and constant need for post-graduates with skills in radiochemistry, radioecology, radiation dosimetry and environmental modelling and a smaller, but still important, demand for radiobiologists and bio-modellers. Most of these needs are from government organizations. If only the nuclear industry is considered, then the largest demand is for radiochemists and radiation protection dosimetrists. Given this spectrum of need and existing capacity in the areas of radiobiology it was concluded that the needs identified would be most efficiently met by three new degree programs: European MSc Radiation Protection European MSc Analytical Radiochemistry European MSc Radioecology. All three master programs would be developed using the framework provided by the Bologna Convention and the lecturing could be shared among specialist Scientists within a network of collaborating universities. Therefore, educational plans have been developed for the above MSc degrees. These plans envisage each degree comprising three modules that are common to all the degrees (3x10 ECTS credits), three specialist modules (3x10 ECTS credits) and a research project (1x60 ECTS credits). The courses should be aimed, not only to fill the identified European postgraduate education gap in radiological sciences, but also to provide a modular structure that is easily accessed by stakeholders for CPD training. It is anticipated that the European Masters will meet the academic training requirements of qualified 'experts', as defined by the European Commission and the IAEA. At the Norwegian University of Life Sciences (UMB) a pilot MSc in Radioecology has successfully been initiated in collaboration with UK and France.

  7. Applying the LANL Statistical Pattern Recognition Paradigm for Structural Health Monitoring to Data from a Surface-Effect Fast Patrol Boat

    SciTech Connect (OSTI)

    Hoon Sohn; Charles Farrar; Norman Hunter; Keith Worden

    2001-01-01

    This report summarizes the analysis of fiber-optic strain gauge data obtained from a surface-effect fast patrol boat being studied by the staff at the Norwegian Defense Research Establishment (NDRE) in Norway and the Naval Research Laboratory (NRL) in Washington D.C. Data from two different structural conditions were provided to the staff at Los Alamos National Laboratory. The problem was then approached from a statistical pattern recognition paradigm. This paradigm can be described as a four-part process: (1) operational evaluation, (2) data acquisition & cleansing, (3) feature extraction and data reduction, and (4) statistical model development for feature discrimination. Given that the first two portions of this paradigm were mostly completed by the NDRE and NRL staff, this study focused on data normalization, feature extraction, and statistical modeling for feature discrimination. The feature extraction process began by looking at relatively simple statistics of the signals and progressed to using the residual errors from auto-regressive (AR) models fit to the measured data as the damage-sensitive features. Data normalization proved to be the most challenging portion of this investigation. A novel approach to data normalization, where the residual errors in the AR model are considered to be an unmeasured input and an auto-regressive model with exogenous inputs (ARX) is then fit to portions of the data exhibiting similar waveforms, was successfully applied to this problem. With this normalization procedure, a clear distinction between the two different structural conditions was obtained. A false-positive study was also run, and the procedure developed herein did not yield any false-positive indications of damage. Finally, the results must be qualified by the fact that this procedure has only been applied to very limited data samples. A more complete analysis of additional data taken under various operational and environmental conditions as well as other structural conditions is necessary before one can definitively state that the procedure is robust enough to be used in practice.

  8. Chemical and microbiological hazards associated with recycling of anaerobic digested residue intended for agricultural use

    SciTech Connect (OSTI)

    Govasmark, Espen; Staeb, Jessica; Holen, Borge; Hoornstra, Douwe; Nesbakk, Tommy; Salkinoja-Salonen, Mirja

    2011-12-15

    In the present study, three full-scale biogas plants (BGP) were investigated for the concentration of heavy metals, organic pollutants, pesticides and the pathogenic bacteria Bacillus cereus and Escherichia coli in the anaerobically digested residues (ADR). The BGPs mainly utilize source-separated organic wastes and industrial food waste as energy sources and separate the ADR into an ADR-liquid and an ADR-solid fraction by centrifugation at the BGP. According to the Norwegian standard for organic fertilizers, the ADR were classified as quality 1 mainly because of high zinc (132-422 mg kg{sup -1} DM) and copper (23-93 mg kg{sup -1} DM) concentrations, but also because of high cadmium (0.21-0.60 mg kg{sup -1} DM) concentrations in the liquid-ADR. In the screening of organic pollutants, only DEHP (9.7-62.1 mg kg{sup -1}) and {Sigma} PAH 16 (0.2-1.98 mg kg{sup -1} DM) were detected in high concentrations according to international regulations. Of the 250 pesticides analyzed, 11 were detected, but only imazalil (<0.30-5.77 mg kg{sup -1} DM) and thiabendazol (<0.14-0.73 mg kg{sup -1} DM) were frequently detected in the ADR-fiber. Concentrations of imazalil and thiabendazol were highest during the winter months, due to a high consumption of citrus fruits in Norway in this period. Ten percent of the ADR-liquid samples contained cereulide-producing B. cereus, whereas no verotoxigenic E. coli was detected. The authors conclude that the risk of chemical and bacterial contamination of the food chain or the environment from agricultural use of ADR seems low.

  9. Analysis of Factors Controlling Cell Cycle that Can Be Synchronized Nondestructively During Root Cap Development

    SciTech Connect (OSTI)

    Martha Hawes

    2011-02-04

    Publications and presentations during the final funding period, including progress in defining the substrate specificity, the primary goal of the project, are listed below. Both short-term and long-term responses mediated by PsUGT1 have been characterized in transgenic or mutant pea, alfalfa, and Arabidopsis with altered expression of PsUGT1. Additional progress includes evaluation of the relationship between control of the cell cycle by PsUGT1 and other glycosyltransferase and glycosidase enzymes that are co-regulated in the legume root cap during the onset of mitosis and differentiation. Transcriptional profiling and multidimensional protein identification technology ('MudPIT') have been used to establish the broader molecular context for the mechanism by which PsUGT1 controls cell cycle in response to environmental signals. A collaborative study with the Norwegian Forest Research Institute (who provided $10,000.00 in supplies and travel funds for collaborator Dr. Toril Eldhuset to travel to Arizona and Dr. H. H. Woo to travel to Norway) made it possible to establish that the inducible root cap system for studying carbohydrate synthesis and solubilization is expressed in gymnosperm as well as angiosperm species. This discovery provides an important tool to amplify the potential applications of the research in defining conserved cell cycle machinery across a very broad range of plant species and habitats. The final work, published during 2009, revealed an additional surprising parallel with mammalian immune responses: The cells whose production is controlled by PsUGT1 appear to function in a manner which is analogous to that of white blood cells, by trapping and killing in an extracellular manner. This may explain why mutation within the coding region of PsUGT1 and its homolog in humans (UGT1) is lethal to plants and animals. The work has been the subject of invited reviews. A postdoctoral fellow, eight undergraduate students, four M.S. students and three Ph.D. students have been supported.

  10. Radiotherapy for Rectal Cancer Is Associated With Reduced Serum Testosterone and Increased FSH and LH

    SciTech Connect (OSTI)

    Bruheim, Kjersti [Cancer Center, Ullevaal University Hospital, Oslo (Norway)], E-mail: Kjersti.Bruheim@medisin.uio.no; Svartberg, Johan [Institute of Clinical Medicine, University of Tromso, Tromso (Norway); Department of Medicine, University Hospital of North Norway, Tromso (Norway); Carlsen, Erik [Department of Gastrointestinal Surgery, Ullevaal University Hospital, Oslo (Norway); Dueland, Svein [Department of Oncology, Norwegian Radium Hospital, Oslo (Norway); Haug, Egil [Hormone Laboratory, Aker University Hospital, Oslo (Norway); Skovlund, Eva [School of Pharmacy, University of Oslo, Oslo (Norway); Tveit, Kjell Magne; Guren, Marianne G. [Cancer Center, Ullevaal University Hospital, Oslo (Norway)

    2008-03-01

    Purpose: It is known that scattered radiation to the testes during pelvic radiotherapy can affect fertility, but there is little knowledge on its effects on male sex hormones. The aim of this study was to determine whether radiotherapy for rectal cancer affects testosterone production. Methods and Materials: All male patients who had received adjuvant radiotherapy for rectal cancer from 1993 to 2003 were identified from the Norwegian Rectal Cancer Registry. Patients treated with surgery alone were randomly selected from the same registry as control subjects. Serum levels of follicle stimulating hormone (FSH), luteinizing hormone (LH), testosterone, and sex hormone binding globulin (SHBG) were analyzed, and free testosterone was calculated (N = 290). Information about the radiotherapy treatment was collected from the patient hospital charts. Results: Serum FSH was 3 times higher in the radiotherapy group than in the control group (median, 18.8 vs. 6.3 IU/L, p <0.001), and serum LH was 1.7 times higher (median, 7.5 vs. 4.5 IU/l, p <0.001). In the radiotherapy group, 27% of patients had testosterone levels below the reference range (8-35 nmol/L), compared with 10% of the nonirradiated patients (p <0.001). Irradiated patients had lower serum testosterone (mean, 11.1 vs. 13.4 nmol/L, p <0.001) and lower calculated free testosterone (mean, 214 vs. 235 pmol/L, p <0.05) than control subjects. Total testosterone, calculated free testosterone, and gonadotropins were related to the distance from the bony pelvic structures to the caudal field edge. Conclusions: Increased serum levels of gonadotropins and subnormal serum levels of testosterone indicate that curative radiotherapy for rectal cancer can result in permanent testicular dysfunction.

  11. Development of Safety Analysis Codes and Experimental Validation for a Very High Temperature Gas-Cooled Reactor - FY-05 Annual Report

    SciTech Connect (OSTI)

    Chang Oh

    2005-09-01

    The very high temperature gas-cooled reactors (VHTGRs) are those concepts that have average coolant temperatures above 9000C or operational fuel temperatures above 12500C. These concepts provide the potential for increased energy conversion efficiency and for high-temperature process heat application in addition to power generation and nuclear hydrogen generation. While all the High Temperature Gas Cooled Reactor (HTGR) concepts have sufficiently high temperatures to support process heat applications, such as desalination and cogeneration, the VHTGR’s higher temperatures are suitable for particular applications such as thermochemical hydrogen production. However, the high temperature operation can be detrimental to safety following a loss-of-coolant accident (LOCA) initiated by pipe breaks caused by seismic or other events. Following the loss of coolant through the break and coolant depressurization, air from the containment will enter the core by molecular diffusion and ultimately by natural convection, leading to oxidation of the in-core graphite structures and fuel. The oxidation will release heat and accelerate the heatup of the reactor core. Thus, without any effective countermeasures, a pipe break may lead to significant fuel damage and fission product release. The Idaho National Laboratory (INL) has investigated this event for the past three years for the HTGR. However, the computer codes used, and in fact none of the world’s computer codes, have been sufficiently developed and validated to reliably predict this event. New code development, improvement of the existing codes, and experimental validation are imperative to narrow the uncertainty in the predictions of this type of accident. The objectives of this Korean/United States collaboration are to develop advanced computational methods for VHTGR safety analysis codes and to validate these computer codes.

  12. Far-ultraviolet observations of comet C/2001 Q4 (NEAT) with FIMS/SPEAR

    SciTech Connect (OSTI)

    Lim, Y.-M.; Min, K.-W.; Feldman, P. D.; Han, W.; Edelstein, J.

    2014-02-01

    We present the results of far-ultraviolet observations of comet C/2001 Q4 (NEAT) that were made with the Far-Ultraviolet Imaging Spectrograph on board the Korean satellite STSAT-1. The observations were conducted in two campaigns during its perihelion approach between 2004 May 8 and 15. Based on the scanning mode observations in the wavelength band of 1400-1700 , we have constructed an image of the comet with an angular size of 55, which corresponds to the central coma region. Several important fluorescence emission lines were detected including S I multiplets at 1429 and 1479 , C I multiplets at 1561 and 1657 , and the CO A{sup 1}?-X{sup 1}?{sup +} Fourth Positive system; we have estimated the production rates of the corresponding species from the fluxes of these emission lines. The estimated production rate of CO was Q {sub CO} = (2.65 0.63) 10{sup 28} s{sup 1}, which is 6.2%-7.4% of the water production rate and is consistent with earlier predictions. The average carbon production rate was estimated to be Q{sub C} = ?1.59 10{sup 28} s{sup 1}, which is ?60% of the CO production rate. However, the observed carbon profile was steeper than that predicted using the two-component Haser model in the inner coma region, while it was consistent with the model in the outer region. The average sulfur production rate was Q{sub S} = (4.031.03) 10{sup 27} s{sup 1}, which corresponds to ?1% of the water production rate.

  13. I-NERI-2007-004-K, DEVELOPMENT AND CHARACTERIZATION OF NEW HIGH-LEVEL WASTE FORMS FOR ACHIEVING WASTE MINIMIZATION FROM PYROPROCESSING

    SciTech Connect (OSTI)

    S.M. Frank

    2011-09-01

    Work describe in this report represents the final year activities for the 3-year International Nuclear Energy Research Initiative (I-NERI) project: Development and Characterization of New High-Level Waste Forms for Achieving Waste Minimization from Pyroprocessing. Used electrorefiner salt that contained actinide chlorides and was highly loaded with surrogate fission products was processed into three candidate waste forms. The first waste form, a high-loaded ceramic waste form is a variant to the CWF produced during the treatment of Experimental Breeder Reactor-II used fuel at the Idaho National Laboratory (INL). The two other waste forms were developed by researchers at the Korean Atomic Energy Research Institute (KAERI). These materials are based on a silica-alumina-phosphate matrix and a zinc/titanium oxide matrix. The proposed waste forms, and the processes to fabricate them, were designed to immobilize spent electrorefiner chloride salts containing alkali, alkaline earth, lanthanide, and halide fission products that accumulate in the salt during the processing of used nuclear fuel. This aspect of the I-NERI project was to demonstrate 'hot cell' fabrication and characterization of the proposed waste forms. The outline of the report includes the processing of the spent electrorefiner salt and the fabrication of each of the three waste forms. Also described is the characterization of the waste forms, and chemical durability testing of the material. While waste form fabrication and sample preparation for characterization must be accomplished in a radiological hot cell facility due to hazardous radioactivity levels, smaller quantities of each waste form were removed from the hot cell to perform various analyses. Characterization included density measurement, elemental analysis, x-ray diffraction, scanning electron microscopy and the Product Consistency Test, which is a leaching method to measure chemical durability. Favorable results from this demonstration project will provide additional options for fission product immobilization and waste management associated the electrochemical/pyrometallurgical processing of used nuclear fuel.

  14. Hydrogen Mitigation Strategy of the APR1400 Nuclear Power Plant for a Hypothetical Station Blackout Accident

    SciTech Connect (OSTI)

    Kim, Jongtae; Hong, Seong-Wan; Kim, Sang-Baik; Kim, Hee-Dong [Korea Atomic Energy Research Institute (Korea, Republic of)

    2005-06-15

    In order to analyze the hydrogen distribution during a hypothetical station blackout accident in the Korean next-generation Advanced Power Reactor 1400 (APR1400) containment, the three-dimensional computational fluid dynamics code GASFLOW was used. The source of the hydrogen and steam for the GASFLOW analysis was obtained from a MAAP calculation. The discharged water, steam, and hydrogen from the pressurizer are released into the water of the in-containment refueling water storage tank (IRWST). Most of the discharged steam is condensed in the IRWST water because of its subcooling, and dry hydrogen is released into the free volume of the IRWST; finally, it goes out to the annular compartment above the IRWST through the vent holes. From the GASFLOW analysis, it was found that the gas mixture in the IRWST becomes quickly nonflammable by oxygen starvation but the hydrogen is accumulated in the annular compartment because of the narrow ventilation gap between the operating deck and containment wall when the igniters installed in the IRWST are not operated. When the igniters installed in the APR1400 were turned on, a short period of burning occurred in the IRWST, and then the flame was extinguished by the oxygen starvation in the IRWST. The unburned hydrogen was released into the annular compartment and went up to the dome because no igniters are installed around the annular compartment in the base design of the APR1400. From this result, it could be concluded that the control of the hydrogen concentration is difficult for the base design. In this study design modifications are proposed and evaluated with GASFLOW in view of the hydrogen mitigation strategy.

  15. Review of APR+ Level 2 PSA

    SciTech Connect (OSTI)

    Lehner, J.R.; Mubayi, V.; Pratt, W. T.

    2012-02-17

    Brookhaven National Laboratory (BNL) assisted the Korea Institute of Nuclear Safety (KINS) in reviewing the Level 2 Probabilistic Safety Assessment (PSA) of the APR+ Advanced Pressurized Water Reactor (PWR) prepared by the Korea Hydro & Nuclear Power Co., Ltd (KHNP) and KEPCO Engineering & Construction Co., Inc. (KEPCO-E&C). The work described in this report involves a review of the APR+ Level 2 PSA submittal [Ref. 1]. The PSA and, therefore, the review is limited to consideration of accidents initiated by internal events. As part of the review process, the review team also developed three sets of Requests for Additional Information (RAIs). These RAIs were provided to KHNP and KEPCO-E&C for their evaluation and response. This final detailed report documents the review findings for each technical element of the PSA and includes consideration of all of the RAIs made by the reviewers as well as the associated responses. This final report was preceded by an interim report [Ref. 2] that focused on identifying important issues regarding the PSA. In addition, a final meeting on the project was held at BNL on November 21-22, 2011, where BNL and KINS reviewers discussed their preliminary review findings with KHNP and KEPCO-E&C staffs. Additional information obtained during this final meeting was also used to inform the review findings of this final report. The review focused not only on the robustness of the APR+ design to withstand severe accidents, but also on the capability and acceptability of the Level 2 PSA in terms of level of detail and completeness. The Korean nuclear regulatory authorities will decide whether the PSA is acceptable and the BNL review team is providing its comments for KINS consideration. Section 2.0 provides the basis for the BNL review. Section 3.0 presents the review of each technical element of the PSA. Conclusions and a summary are presented in Section 4.0. Section 5.0 contains the references.

  16. WRF-Chem Simulations of Aerosols and Anthropogenic Aerosol Radiative Forcing in East Asia

    SciTech Connect (OSTI)

    Gao, Yi; Zhao, Chun; Liu, Xiaohong; Zhang, Meigen; Leung, Lai-Yung R.

    2014-08-01

    This study aims to provide a first comprehensive evaluation of WRF-Chem for modeling aerosols and anthropogenic aerosol radiative forcing (RF) over East Asia. Several numerical experiments were conducted from November 2007 to December 2008. Comparison between model results and observations shows that the model can generally reproduce the observed spatial distributions of aerosol concentration, aerosol optical depth (AOD) and single scattering albedo (SSA) from measurements at different sites, including the relatively higher aerosol concentration and AOD over East China and the relatively lower AOD over Southeast Asia, Korean, and Japan. The model also depicts the seasonal variation and transport of pollutions over East Asia. Particulate matter of 10 um or less in the aerodynamic diameter (PM10), black carbon (BC), sulfate (SO42-), nitrate (NO3-) and ammonium (NH4+) concentrations are higher in spring than other seasons in Japan due to the pollutant transport from polluted area of East Asia. AOD is high over Southwest and Central China in winter, spring and autumn and over North China in summer while is low over South China in summer due to monsoon precipitation. SSA is lowest in winter and highest in summer. The model also captures the dust events at the Zhangye site in the semi-arid region of China. Anthropogenic aerosol RF is estimated to range from -5 to -20 W m-2 over land and -20 to -40 W m-2 over ocean at the top of atmosphere (TOA), 5 to 30 W m-2 in the atmosphere (ATM) and -15 to -40 W m-2 at the bottom (BOT). The warming effect of anthropogenic aerosol in ATM results from BC aerosol while the negative aerosol RF at TOA is caused by scattering aerosols such as SO4 2-, NO3 - and NH4+. Positive BC RF at TOA compensates 40~50% of the TOA cooling associated with anthropogenic aerosol.

  17. THE FIRST VERY LONG BASELINE INTERFEROMETRY IMAGE OF A 44GHz METHANOL MASER WITH THE KVN AND VERA ARRAY (KaVA)

    SciTech Connect (OSTI)

    Matsumoto, Naoko; Hirota, Tomoya; Honma, Mareki; Kameya, Osamu; Sunada, Kazuyoshi; Sugiyama, Koichiro; Motogi, Kazuhito; Kim, Kee-Tae; Kim, Mikyoung; Byun, Do-Young; Jung, Taehyun; Kim, Jongsoo; Lyo, A-Ran; Oh, Chungsik; Bae, Jaehan; Chung, Hyunsoo; Chung, Moon-Hee; Cho, Se-Hyung; Chibueze, James O.; Shino, Nagisa; and others

    2014-07-01

    We have carried out the first very long baseline interferometry (VLBI) imaging of a 44GHz class I methanol maser (7{sub 0}-6{sub 1} A {sup +}) associated with a millimeter core MM2 in a massive star-forming region IRAS181511208 with KaVA (KVN and VERA Array), which is a newly combined array of KVN (Korean VLBI Network) and VERA (VLBI Exploration of Radio Astrometry). We have succeeded in imaging compact maser features with a synthesized beam size of 2.7milliarcsecondsנ1.5milliarcseconds (mas). These features are detected at a limited number of baselines within the length of shorter than ?650km corresponding to 100M? in the uv-coverage. The central velocity and the velocity width of the 44GHz methanol maser are consistent with those of the quiescent gas rather than the outflow traced by the SiO thermal line. The minimum component size among the maser features is ?5masנ2mas, which corresponds to the linear size of ?15AUנ6AU assuming a distance of 3kpc. The brightness temperatures of these features range from ?3.5 10{sup 8} to 1.0 10{sup 10}K, which are higher than the estimated lower limit from a previous Very Large Array observation with the highest spatial resolution of ?50mas. The 44GHz class I methanol maser in IRAS181511208 is found to be associated with the MM2 core, which is thought to be less evolved than another millimeter core MM1 associated with the 6.7GHz class II methanol maser.

  18. CANDIDATES FOR THE YOUNG STELLAR OUTFLOWS: WATER AND METHANOL MASERS FROM YOUNG STELLAR OBJECTS

    SciTech Connect (OSTI)

    Lim, Wanggi; Lyo, A-Ran; Kim, Kee-Tae; Byun, Do-Young

    2012-11-01

    We conducted simultaneous 22 GHz water maser and 44 GHz class I methanol maser surveys of newly identified 282 H{sub 2} emission features from the 2.122 {mu}m H{sub 2} narrowband image survey in the Galactic plane (UWISH2 project) using Korean VLBI Network 21 m radio telescopes. We detected 16 and 13 new water and methanol maser sources, respectively. This result indicates that at least {approx}5% of the H{sub 2} emission features originate from young stellar objects (YSOs) that are in the right physical condition to produce the water and methanol masers. The masers are closely related to the current outflow activities in the Galactic plane. The power sources of these 23 diffused/collimated H{sub 2} emission features (six sources are detected for both masers) are likely to be intermediate- to high-mass YSOs, based on a comparison with the maser luminosities of other well-studied YSOs. Both maser velocities are mostly close to their own systemic velocities within {approx}<5 km s{sup -1}, even though water masers generally show larger variabilities in the intensity, velocity, and shape than methanol masers. We also discovered three new water maser sources with high-velocity components: {approx}25 km s{sup -1} redshifted CMHO 019, {approx}50 km s{sup -1} blueshifted CMHO 132, and {approx}120 km s{sup -1} blueshifted CMHO 182. In particular, we propose that the dominant blueshifted water maser of CHMO 182 can be a unique laboratory for the study of the high-mass young stellar jet and its acceleration.

  19. Fluid Dynamics of Carbon Dioxide Disposal into Saline Aquifers

    SciTech Connect (OSTI)

    Garcia, Julio Enrique

    2003-12-18

    Injection of carbon dioxide (CO{sub 2}) into saline aquifers has been proposed as a means to reduce greenhouse gas emissions (geological carbon sequestration). Large-scale injection of CO{sub 2} will induce a variety of coupled physical and chemical processes, including multiphase fluid flow, fluid pressurization and changes in effective stress, solute transport, and chemical reactions between fluids and formation minerals. This work addresses some of these issues with special emphasis given to the physics of fluid flow in brine formations. An investigation of the thermophysical properties of pure carbon dioxide, water and aqueous solutions of CO{sub 2} and NaCl has been conducted. As a result, accurate representations and models for predicting the overall thermophysical behavior of the system CO{sub 2}-H{sub 2}O-NaCl are proposed and incorporated into the numerical simulator TOUGH2/ECO{sub 2}. The basic problem of CO{sub 2} injection into a radially symmetric brine aquifer is used to validate the results of TOUGH2/ECO2. The numerical simulator has been applied to more complex flow problem including the CO{sub 2} injection project at the Sleipner Vest Field in the Norwegian sector of the North Sea and the evaluation of fluid flow dynamics effects of CO{sub 2} injection into aquifers. Numerical simulation results show that the transport at Sleipner is dominated by buoyancy effects and that shale layers control vertical migration of CO{sub 2}. These results are in good qualitative agreement with time lapse surveys performed at the site. High-resolution numerical simulation experiments have been conducted to study the onset of instabilities (viscous fingering) during injection of CO{sub 2} into saline aquifers. The injection process can be classified as immiscible displacement of an aqueous phase by a less dense and less viscous gas phase. Under disposal conditions (supercritical CO{sub 2}) the viscosity of carbon dioxide can be less than the viscosity of the aqueous phase by a factor of 15. Because of the lower viscosity, the CO{sub 2} displacement front will have a tendency towards instability. Preliminary simulation results show good agreement between classical instability solutions and numerical predictions of finger growth and spacing obtained using different gas/liquid viscosity ratios, relative permeability and capillary pressure models. Further studies are recommended to validate these results over a broader range of conditions.

  20. Russian Experience in the Regulatory Supervision of the Uranium Legacy Sites - 12441

    SciTech Connect (OSTI)

    Kiselev, M.F.; Romanov, V.V.; Shandala, N.K.; Titov, A.V.; Kiselev, S.M.; Seregin, V.A.; Metlyaev, E.G.; Novikova, N.; Khokhlova, E.A.

    2012-07-01

    Management of the uranium legacy is accompanied with environmental impact intensity of which depends on the amount of the waste generated, the extent of that waste localization and environmental spreading. The question is: how hazardous is such impact on the environment and human health? The criterion for safety assurance is adequate regulation of the uranium legacy. Since the establishment of the uranium industry, the well done regulatory system operates in the FMBA of Russia. Such system covers inter alia, the uranium legacy. This system includes the extent laboratory network of independent control and supervision, scientific researches, regulative practices. The current Russian normative and legal basis of the regulation and its application practice has a number of problems relating to the uranium legacy, connected firstly with the environmental remediation. To improve the regulatory system, the urgent tasks are: -To introduce the existing exposure situation into the national laws and standards in compliance with the ICRP system. - To develop criteria for site remediation and return, by stages, to uncontrolled uses. The similar criteria have been developed within the Russian-Norwegian cooperation for the purpose of remediation of the sites for temporary storage of SNF and RW. - To consider possibilities and methods of optimization for the remediation strategies under development. - To separate the special category - RW resulted from uranium ore mining and dressing. The current Russian RW classification is based on the waste subdivision in terms of the specific activities. Having in mind the new RW-specific law, we receive the opportunity to separate some special category - RW originated from the uranium mining and milling. Introduction of such category can simplify significantly the situation with management of waste of uranium mining and milling processes. Such approach is implemented in many countries and approved by IAEA. The category of 'RW originated from uranium mining and milling' is to be introduced as the legal acts and regulatory documents. The recent ICRP recommendations provide the flexible approaches for solving of such tasks. The FMBA of Russia recognizes the problems of radiation safety assurance related to the legacy of the former USSR in the uranium mining industry. Some part of the regulatory problems assumes to be solved within the EurAsEC inter-state target program 'Reclamation of the territories of the EurAsEC member states affected by the uranium mining and milling facilities'. Using the example of the uranium legacy sites in Kyrgyz and Tajikistan which could result in the tran-boundary disasters and require urgent reclamation, the experience will be gained to be used in other states as well. Harmonization of the national legislations and regulative documents on radiation safety assurance is envisaged. (authors)

  1. REDUCING UNCERTAINTIES IN MODEL PREDICTIONS VIA HISTORY MATCHING OF CO2 MIGRATION AND REACTIVE TRANSPORT MODELING OF CO2 FATE AT THE SLEIPNER PROJECT

    SciTech Connect (OSTI)

    Zhu, Chen

    2015-03-31

    An important question for the Carbon Capture, Storage, and Utility program is “can we adequately predict the CO2 plume migration?” For tracking CO2 plume development, the Sleipner project in the Norwegian North Sea provides more time-lapse seismic monitoring data than any other sites, but significant uncertainties still exist for some of the reservoir parameters. In Part I, we assessed model uncertainties by applying two multi-phase compositional simulators to the Sleipner Benchmark model for the uppermost layer (Layer 9) of the Utsira Sand and calibrated our model against the time-lapsed seismic monitoring data for the site from 1999 to 2010. Approximate match with the observed plume was achieved by introducing lateral permeability anisotropy, adding CH4 into the CO2 stream, and adjusting the reservoir temperatures. Model-predicted gas saturation, CO2 accumulation thickness, and CO2 solubility in brine—none were used as calibration metrics—were all comparable with the interpretations of the seismic data in the literature. In Part II & III, we evaluated the uncertainties of predicted long-term CO2 fate up to 10,000 years, due to uncertain reaction kinetics. Under four scenarios of the kinetic rate laws, the temporal and spatial evolution of CO2 partitioning into the four trapping mechanisms (hydrodynamic/structural, solubility, residual/capillary, and mineral) was simulated with ToughReact, taking into account the CO2-brine-rock reactions and the multi-phase reactive flow and mass transport. Modeling results show that different rate laws for mineral dissolution and precipitation reactions resulted in different predicted amounts of trapped CO2 by carbonate minerals, with scenarios of the conventional linear rate law for feldspar dissolution having twice as much mineral trapping (21% of the injected CO2) as scenarios with a Burch-type or Alekseyev et al.–type rate law for feldspar dissolution (11%). So far, most reactive transport modeling (RTM) studies for CCUS have used the conventional rate law and therefore simulated the upper bound of mineral trapping. However, neglecting the regional flow after injection, as most previous RTM studies have done, artificially limits the extent of geochemical reactions as if it were in a batch system. By replenishing undersaturated groundwater from upstream, the Utsira Sand is reactive over a time scale of 10,000 years. The results from this project have been communicated via five peer-reviewed journal articles, four conference proceeding papers, and 19 invited and contributed presentations at conferences and seminars.

  2. I-NERI Annual Technical Progress Report 2007-004-K Development and Characterization of New High-Level Waste Forms for Achieving Waste Minimization from Pyroprocessing

    SciTech Connect (OSTI)

    S. Frank

    2010-09-01

    The current method for the immobilization of fission products that accumulate in electrorefiner salt during the electrochemical processing of used metallic nuclear fuel is to encapsulate the electrorefiner salt in a glass-bonded sodalite ceramic waste form. This process was developed by Argonne National Laboratory in the USA and is currently performed at the Idaho National Laboratory for the treatment of Experimental Breeder Reactor-II (EBR-II) used fuel. This process utilizes a once-through option for the disposal of spent electrorefiner salt; where, after the treatment of the EBR-II fuel, the electrorefiner salt containing the active fission products will be disposed of in the ceramic waste form (CWF). The CWF produced will have low fission product loading of approximately 2 to 5 weight percent due to the limited fuel inventory currently being processed. However; the design and implementation of advanced electrochemical processing facilities to treat used fuel would process much greater quantities fuel. With an advanced processing facility, it would be necessary to selectively remove fission products from the electrorefiner salt for salt recycle and to concentrate the fission products to reduce the volume of high-level waste from the treatment facility. The Korean Atomic Energy Research Institute and the Idaho National Laboratory have been collaborating on I-NERI research projects for a number of years to investigate both aspects of selective fission product separation from electrorefiner salt, and to develop advanced waste forms for the immobilization of the collected fission products. The first joint KAERI/INL I-NERI project titled: 2006-002-K, Separation of Fission Products from Molten LiCl-KCl Salt Used for Electrorefining of Metal Fuels, was successfully completed in 2009 by concentrating and isolating fission products from actual electrorefiner salt used for the treated used EBR-II fuel. Two separation methods were tested and from these tests were produced concentrated salt products that acted as the feed material for development of advanced waste forms investigated in this proposal. Accomplishments from the first year activities associated with this I-NERI project included the down selection of candidate waste forms to immobilize fission products separated from electrorefiner salt, and the design of equipment to fabricate actual waste forms in the Hot Fuels Examination Facility (HFEF) at the INL. Reported in this document are accomplishments from the second year (FY10) work performed at the INL, and includes the testing of waste form fabrication equipment, repeating the fission product precipitation experiment, and initial waste form fabrication efforts.

  3. EV Charging Through Wireless Power Transfer: Analysis of Efficiency Optimization and Technology Trends

    SciTech Connect (OSTI)

    Miller, John M; Rakouth, Heri; Suh, In-Soo

    2012-01-01

    This paper is aimed at reviewing the technology trends for wireless power transfer (WPT) for electric vehicles (EV). It also analyzes the factors affecting its efficiency and describes the techniques currently used for its optimization. The review of the technology trends encompasses both stationary and moving vehicle charging systems. The study of the stationary vehicle charging technology is based on current implementations and on-going developments at WiTricity and Oak Ridge National Lab (ORNL). The moving vehicle charging technology is primarily described through the results achieved by the Korean Advanced Institute of Technology (KAIST) along with on-going efforts at Stanford University. The factors affecting the efficiency are determined through the analysis of the equivalent circuit of magnetic resonant coupling. The air gap between both transmitting and receiving coils along with the magnetic field distribution and the relative impedance mismatch between the related circuits are the primary factors affecting the WPT efficiency. Currently the industry is looking at an air gap of 25 cm or below. To control the magnetic field distribution, Kaist has recently developed the Shaped Magnetic Field In Resonance (SMFIR) technology that uses conveniently shaped ferrite material to provide low reluctance path. The efficiency can be further increased by means of impedance matching. As a result, Delphi's implementation of the WiTricity's technology exhibits a WPT efficiency above 90% for stationary charging while KAIST has demonstrated a maximum efficiency of 83% for moving vehicle with its On Line Vehicle (OLEV) project. This study is restricted to near-field applications (short and mid-range) and does not address long-range technology such as microwave power transfer that has low efficiency as it is based on radiating electromagnetic waves. This paper exemplifies Delphi's work in powertrain electrification as part of its innovation for the real world program geared toward a safer, greener and more connected driving. Moreover, it draws from and adds to Dr. Andrew Brown Jr.'s SAE books 'Active Safety and the Mobility Industry', 'Connectivity and Mobility Industry', and 'Green Technologies and the Mobility Industry'. Magnetic resonant coupling is the foundation of modern wireless power transfer. Its efficiency can be controlled through impedance matching and magnetic field shaping. Current implementations use one or both of these control methods and enable both stationary and mobile charging with typical efficiency within the 80% and 90% range for an air gap up to 25 cm.

  4. War, peace, and international politics. Fourth edition

    SciTech Connect (OSTI)

    Ziegler, D.W. )

    1987-01-01

    We must conclude that war remains a major problem in the last quarter of the twentieth century. My intention in this book is to introduce you to international relations by focusing on this problem. War is not the only problem of international relations, and so this book does not exhaust the field. But war is a central problem, and the possibility of resort to war affects other aspects of international relations. Whatever else we may look at, we cannot avoid looking at war. In fact, in looking at war, we will touch on most of the other subjects important in international relations. War is conflict among states carried on by their armed forces. To distinguish war from border skirmishes and other minor incidents we usually say it must reach a certain magnitude (for example, at least 1,000 soldiers killed in battle over a year). It would be ideal if we could systematically study all the wars in the last hundred years, but such an exhaustive study would be out of place here. At the same time we cannot discuss such subjects as the cause of war or proposals for preventing it without some knowledge about actual wars. We must test theories against historical facts. What follows in Part I is a somewhat detailed history of seven wars (or groups of wars) fought in the last hundred years. These include the most destructive of the wars World War I (1914-1918), World War II (1939-1945), and the Korean War (1950-1953). By way of background to World War I, we will look at the wars of German unification (1864-1871), which preceded and in some ways prepared the way for it. To balance our account, we will also look at several recent wars India and Pakistan (1971), Uganda and Tanzania (1978-1979), and Cambodia, Vietnam, and China (1978-1980). After looking at some of the major wars of the last hundred years, we will look at what people have the about the causes of war in general.

  5. ADVANCED WAVEFORM SIMULATION FOR SEISMIC MONITORING EVENTS

    SciTech Connect (OSTI)

    Helmberger, Donald V.; Tromp, Jeroen; Rodgers, Arthur J.

    2008-10-17

    This quarter, we have focused on several tasks: (1) Building a high-quality catalog of earthquake source parameters for the Middle East and East Asia. In East Asia, we computed source parameters using the CAP method for a set of events studied by Herrman et al., (MRR, 2006) using a complete waveform technique. Results indicated excellent agreement with the moment magnitudes in the range 3.5 -5.5. Below magnitude 3.5 the scatter increases. For events with more than 2-3 observations at different azimuths, we found good agreement of focal mechanisms. Depths were generally consistent, although differences of up to 10 km were found. These results suggest that CAP modeling provides estimates of source parameters at least as reliable as complete waveform modeling techniques. However, East Asia and the Yellow Sea Korean Paraplatform (YSKP) region studied are relatively laterally homogeneous and may not benefit from the CAP methods flexibility to shift waveform segments to account for path-dependent model errors. A more challenging region to study is the Middle East where strong variations in sedimentary basin, crustal thickness and crustal and mantle seismic velocities greatly impact regional wave propagation. We applied the CAP method to a set of events in and around Iran and found good agreement between estimated focal mechanisms and those reported by the Global Centroid Moment Tensor (CMT) catalog. We found a possible bias in the moment magnitudes that may be due to the thick low-velocity crust in the Iranian Plateau. (2) Testing Methods on a Lifetime Regional Data Set. In particular, the recent 2/21/08 Nevada Event and Aftershock Sequence occurred in the middle of USArray, producing over a thousand records per event. The tectonic setting is quite similar to Central Iran and thus provides an excellent testbed for CAP+ at ranges out to 10, including extensive observations of crustal thinning and thickening and various Pnl complexities. Broadband modeling in 1D, 2D, and 3D will be presented. (3) Shallow Crustal Structure and Sparse Network Source Inversions for Southern California. We conducted a detailed test of a recently developed technique, CAPloc, in recovering source parameters including location and depth based on tomographic maps. We tested two-station solutions against 160 well determined events which worked well except for paths crossing deep basins and along mountain ridges.

  6. Estimation of the Alpha Factor Parameters for the Emergency Diesel Generators of Ulchin Unit 3

    SciTech Connect (OSTI)

    Dae Il Kang; Sang Hoon Han

    2006-07-01

    Up to the present, the generic values of the Common cause failure (CCF) event parameters have been used in most PSA projects for the Korean NPPs. However, the CCF analysis should be performed with plant specific information to meet Category II of the ASME PRA Standard. Therefore, we estimated the Alpha factor parameters of the emergency diesel generator (EDG) for Ulchin Unit 3 by using the International Common-Cause Failure data Exchange (ICDE) database. The ICDE database provides the member countries with only the information needed for an estimation of the CCF parameters. The Ulchin Unit A3, pressurized water reactor, has two onsite EDGs and one alternate AC (AAC) diesel generator. The onsite EDGs of Unit 3 and 4 and the AAC are manufactured by the same company, but they are designed differently. The estimation procedure of the Alpha factor used in this study follows the approach of the NUREG/CR-5485. Since we did not find any qualitative difference between the target systems (two EDGs of Ulchin Unit 3) and the original systems (ICDE database), the applicability factor of each CCF event in the ICDE database was assumed to be 1. For the case of three EDGs including the AAC, five CCF events for the EDGs in the ICDE database were identified to be screened out. However, the detailed information for the independent events in the ICDE database is not presented. Thus, we assumed that the applicability factors for the CCF events to be screened out were, to be conservative, 0.5 and those of the other CCF events were 1. The study results show that the estimated Alpha parameters by using the ICDE database are lower than the generic values of the NUREG/CR-5497. The EDG system unavailability of the 1 out of 3 success criterion except for the supporting systems was calculated as 2.76 E-3. Compared with the system unavailability estimated by using the data of NUREG/CR-5497, it is decreased by 31.2%. (authors)

  7. CO2 Capture Project-An Integrated, Collaborative Technology Development Project for Next Generation CO2 Separation, Capture and Geologic Sequestration

    SciTech Connect (OSTI)

    Helen Kerr; Linda M. Curran

    2005-04-15

    The CO{sub 2} Capture Project (CCP) was a joint industry project, funded by eight energy companies (BP, ChevronTexaco, EnCana, ENI, Norsk Hydro, Shell, Statoil, and Suncor) and three government agencies (European Union [DG RES & DG TREN], the Norwegian Research Council [Klimatek Program] and the U.S. Department of Energy [NETL]). The project objective was to develop new technologies that could reduce the cost of CO{sub 2} capture and geologic storage by 50% for retrofit to existing plants and 75% for new-build plants. Technologies were to be developed to ''proof of concept'' stage by the end of 2003. Certain promising technology areas were increased in scope and the studies extended through 2004. The project budget was approximately $26.4 million over 4 years and the work program is divided into eight major activity areas: Baseline Design and Cost Estimation--defined the uncontrolled emissions from each facility and estimate the cost of abatement in $/tonne CO{sub 2}. Capture Technology, Post Combustion: technologies, which can remove CO{sub 2} from exhaust gases after combustion. Capture Technology, Oxyfuel: where oxygen is separated from the air and then burned with hydrocarbons to produce an exhaust with high CO{sub 2} for storage. Capture Technology, Pre-Combustion: in which, natural gas and petroleum cokes are converted to hydrogen and CO{sub 2} in a reformer/gasifier. Common Economic Model/Technology Screening: analysis and evaluation of each technology applied to the scenarios to provide meaningful and consistent comparison. New Technology Cost Estimation: on a consistent basis with the baseline above, to demonstrate cost reductions. Geologic Storage, Monitoring and Verification (SMV): providing assurance that CO{sub 2} can be safely stored in geologic formations over the long term. Non-Technical: project management, communication of results and a review of current policies and incentives governing CO{sub 2} capture and storage. Pre-combustion De-carbonization (hydrogen fuel) technologies showed excellent results and may be able to meet the CCP's aggressive cost reduction targets for new-build plants. Chemical looping to produce oxygen for oxyfuel combustion shows real promise. Post-combustion technologies emerged as higher cost options that may only have niche roles. Storage, measurement, and verification studies suggest that geologic sequestration will be a safe form of long-term CO{sub 2} storage. Economic modeling shows that options to reduce costs by 50% exist. A rigorous methodology for technology evaluation was developed. Public acceptance and awareness were enhanced through extensive communication of results to the stakeholder community (scientific, NGO, policy, and general public). Two volumes of results have been published and are available to all. Well over 150 technical papers were produced. All funded studies for this phase of the CCP are complete. The results are summarized in this report and all final reports are presented in the attached appendices.

  8. Groundwater Monitoring and Control Before Decommissioning of the Research Reactor VVR-S from Magurele-Bucharest

    SciTech Connect (OSTI)

    Dragusin, Mitica

    2008-01-15

    The research reactor type VVR-S (tank type, water is cooler, moderator and reflector, thermal power- 2 MW, thermal energy- 9. 52 GW d) was put into service in July 1957 and, in December 1997 was shout down. In 2002, Romanian Government decided to put the research reactor in the permanent shut-down in order to start the decommissioning. This nuclear facility was used in nuclear research and radioisotope production for 40 years, without events, incidents or accidents. Within the same site, in the immediate vicinity of the research reactor, there are many other nuclear facilities: Radioactive Waste Treatment Plant, Tandem Van der Graaf heavy ions accelerator, Cyclotron, Industrial Irradiator, Radioisotope Production Center. The objectives of this work were dedicated on the water underground analyses described in the following context: - presentation of the approaches in planning the number of drillings, vertical soil profiles (characteristics, analyses, direction of the flow of underground water, uncertainties in measurements); - presentation of the instrumentation used in analyses of water, soil and vegetation samples - analyses and final conclusions on results of the measurements; - comparison of the results of measurements on underground water from drillings with the measurements results on samples from the town and the system of drinking water - supplied from the second level of underground water. According to the analysis, in general, no values higher than the Minimum Detectable Activity were detected in water samples (MDA) for Pb{sup 212}, Bi{sup 214}, Pb{sup 214}, Ac{sup 228}, but situated under values foreseen in drinking water. Distribution of Uranium As results of the Uranium determination, values higher than 0,004 mg/l (4 ppb) were detected, values that represent the average contents in the underground water. The higher values, 2-3 times higher than background, were detected in the water from the drillings F15, F12, F5, F13, drillings located between RWTP (Radioactive Waste Treatment Plant) - the 300 m{sup 3} tanks and the Spent Filters Storage (SFS). At south of this area, on the leaking direction of the underground water layer, in the drillings F1, F2, F3, F18 and at east, in F6, F7, the natural Uranium values are within the background for the underground-water. Distribution of Radon For the Radon determination with RAD 7 equipment, water samples were taken from the same piezo-metrical drilling, 2 or 4 times during of six months period, and then, the average contents were calculated, which varied between 0,35 - 2,1 Bq/l. The values higher than 1,1 -1,2 Bq/l were detected in the water taken from the drillings located in the northern part (F10, F11) and in the eastern part (F6, F8) of the Institute fences (around of the radioactive waste storage facilities). The concentrations of 0,3 - 0,5 Bq/l are in the underground-water layer 'intercepted' by the piezo-metrical drillings (F1, F2, F3) located near the Nuclear Reactor. Concentration of heavy metals: 0.04-0.08 mg/l Pb in F5, F14, F7, F8 exceeding MCA-Maximum Admissible Concentration (0.01 mg/l) for Pb, and for Zn in F5, F7, F8, F14 are 0.2-0.5 mg/l situated under MCA , and 0.18 mg/l in F18, in accordance with tendency of decreasing of concentration of contaminants. After 50 years of deploying nuclear activities on the site the underground water quality is in very good condition. Taking into consideration the direction of the underground water flow, it results that, only in the area of underground pipe, around of the research reactor and radioactive waste treatment plant, the quality of water is influenced, and remediation actions are not necessary. Based on measurements executed in F18, the water quality is the same with any other part of the region. During the decommissioning of the Research Reactor, the samples from 18 drillings will be analysed monthly, and the contents of the heavy metals, Pb and Zn, will be monitored carefully, together with all the factors: air, soil, vegetation, subsoil, water surface and underground water. A great attention will be paid to the dismantlement of the underground structures, the 30 m{sup 3} tank, that collects all the liquid radioactive waste from the reactor, the pipes that connects this tank to the other two 300 m{sup 3} tanks, from RWTP, the ventilation ducts between the Spent Filters Storage and reactor's stack, in order to prevent contamination of surface and underground water. Engineering Absorbent Barriers will be used both for hydrophilic substances and for hydrophobic substances, tents will be used for preventing the spread of possible contaminants from the pipes and tanks, owing to the precipitation or wind, and the tanks and pipes will be drained to eliminate the spills. Since we are dealing with a multinuclear facility site, the on site and off site Monitoring Program of Institute will be properly upgraded, taking into account the values of the derived emission limit approved by Regulatory Body, before, during and after the completion of the works with impact on underground water. In another work will be presented radiological map of land associated of decommissioning project (on surface, at 0.15 m and 0.30 m in depth of soil) and estimation of migration rate in soil up to ground water level. Applying these measures, taking account of the radiological status at the beginning of the project, will mean savings and a good protection of the environment in completing the decommissioning project.

  9. Severe Accident Scoping Simulations of Accident Tolerant Fuel Concepts for BWRs

    SciTech Connect (OSTI)

    Robb, Kevin R.

    2015-08-01

    Accident-tolerant fuels (ATFs) are fuels and/or cladding that, in comparison with the standard uranium dioxide Zircaloy system, can tolerate loss of active cooling in the core for a considerably longer time period while maintaining or improving the fuel performance during normal operations [1]. It is important to note that the currently used uranium dioxide Zircaloy fuel system tolerates design basis accidents (and anticipated operational occurrences and normal operation) as prescribed by the US Nuclear Regulatory Commission. Previously, preliminary simulations of the plant response have been performed under a range of accident scenarios using various ATF cladding concepts and fully ceramic microencapsulated fuel. Design basis loss of coolant accidents (LOCAs) and station blackout (SBO) severe accidents were analyzed at Oak Ridge National Laboratory (ORNL) for boiling water reactors (BWRs) [2]. Researchers have investigated the effects of thermal conductivity on design basis accidents [3], investigated silicon carbide (SiC) cladding [4], as well as the effects of ATF concepts on the late stage accident progression [5]. These preliminary analyses were performed to provide initial insight into the possible improvements that ATF concepts could provide and to identify issues with respect to modeling ATF concepts. More recently, preliminary analyses for a range of ATF concepts have been evaluated internationally for LOCA and severe accident scenarios for the Chinese CPR1000 [6] and the South Korean OPR-1000 [7] pressurized water reactors (PWRs). In addition to these scoping studies, a common methodology and set of performance metrics were developed to compare and support prioritizing ATF concepts [8]. A proposed ATF concept is based on iron-chromium-aluminum alloys (FeCrAl) [9]. With respect to enhancing accident tolerance, FeCrAl alloys have substantially slower oxidation kinetics compared to the zirconium alloys typically employed. During a severe accident, FeCrAl would tend to generate heat and hydrogen from oxidation at a slower rate compared to the zirconium-based alloys in use today. The previous study, [2], of the FeCrAl ATF concept during station blackout (SBO) severe accident scenarios in BWRs was based on simulating short term SBO (STSBO), long term SBO (LTSBO), and modified SBO scenarios occurring in a BWR-4 reactor with MARK-I containment. The analysis indicated that FeCrAl had the potential to delay the onset of fuel failure by a few hours depending on the scenario, and it could delay lower head failure by several hours. The analysis demonstrated reduced in-vessel hydrogen production. However, the work was preliminary and was based on limited knowledge of material properties for FeCrAl. Limitations of the MELCOR code were identified for direct use in modeling ATF concepts. This effort used an older version of MELCOR (1.8.5). Since these analyses, the BWR model has been updated for use in MELCOR 1.8.6 [10], and more representative material properties for FeCrAl have been modeled. Sections 2 4 present updated analyses for the FeCrAl ATF concept response during severe accidents in a BWR. The purpose of the study is to estimate the potential gains afforded by the FeCrAl ATF concept during BWR SBO scenarios.

  10. Final Technical Report, 30 SEPTEMBER 2002 - 31 JANUARY 2006; ENERGY PARTIONING FOR SEISMIC EVENTS IN FENNOSCANDIA AND NW RUSSIA

    SciTech Connect (OSTI)

    Bungum, H.; Kvaerna, T.; Larsen, S.

    2006-01-31

    In this project we have addressed the problem of energy partitioning at distances ranging from very local to regional for various kinds of seismic sources. On the local and regional scale (20-220 km) we have targeted events from the region offshore Western Norway where we have both natural earthquake activity as well as frequent occurrence of underwater explosions carried out by the Norwegian Navy. On the small scale we have focused on analysis of observations from an in-mine network of 16-18 sensors in the Pyhasalmi mine in central Finland. This analysis has been supplemented with 3-D finite difference wave propagation simulations in a realistic mine model to investigate the physical mechanisms that partition seismic energy in the near source region in and around the underground mine. The results from modeling and analysis of local and regional data show that mean S/P amplitude ratios for explosions and natural events differ at individual stations and are in general higher for natural events and frequency bands above 3 Hz. However, the distributions of S/P ratios for explosions and natural events overlap in all analyzed frequency bands. Thus, for individual events in our study area, S/P amplitude ratios can only assist the discrimination between an explosion or a natural event. This observation is supported by synthetic seismograms calculated for simple 1-D models which demonstrate that explosions also generate shear-wave energy if they are fired close to an interface with a strong material contrast (as is the case for most explosions), e.g., free surface or the ocean bottom. The larger difference in S/P ratios between earthquakes and explosions for higher frequencies can be explained by the fact that at low frequencies (larger wavelengths), discontinuities and structural heterogeneities in the explosion source region are stronger generators of converted S energy. The S*-phase, for example, is most efficiently generated whenever an explosion source is located close (within one wavelength) to a strong discontinuity. The Pyhasalmi explosions have generally lower S/P ratios than the rockbursts for all frequencies, but the difference is far too small to be significant for classification purposes. The maxima for the explosion distributions are all below 2, whereas they are all above 2 for the rockbursts. The rockbursts also have a wider distribution of S/P ratios, which can be explained by the variability of the radiation patterns from the rockburst sources. S/P ratios for explosions and rockbursts located in the same small area of the mine show results very similar to those for the full data set. This indicates that the observed differences in S/P ratios between explosions and rockbursts are due to differences in the source characteristics, and not due to propagation effects along paths in the mine. 3-D finite-difference simulations were used to model seismic events within the Pyhasalmi mine. In particular, a January 26, 2003 rockburst was modeled at frequencies of 50 Hz (4 meter grid) and 100 Hz (2 meter grid). We were able to match the characteristics of the observed data at 50 Hz particularly well, and the characteristics of the 100 Hz data reasonably well. These results help validate the 3-D geologic mine model and the reliability of our simulations. The simulations showed that significant shear-energy can be produced due to the geologic and structural heterogeneities within the mine. In fact, mode-converted shear-energy generated from mine heterogeneity can dominate the compressional energy from an explosive source. A strong correlation is observed between the distance of a source from a mine heterogeneity and the magnitude of generated shear-energy. The ratio of shear to compressional energy is about a factor of two larger when the source is located within one wavelength from a mine heterogeneity. The simulations also suggest that excavated mine volumes are significantly stronger contributors to shear-energy generation than geologic heterogeneities. However, the simulations reveal that the magnitude of shear-energy ge