Sample records for koch akua controls

  1. Estimating and controlling Gulf Coast ticks, Amblyomma maculatum Koch, on the coastal prairie of Texas

    E-Print Network [OSTI]

    Bengaly, Sekouba

    1987-01-01T23:59:59.000Z

    ESTIMATING AND CONTROLLING GULF COAST TICKS, AMBLYOMMA MACULATUM KOCH, ON THE COASTAL PRAIRIE OF TEXAS. A THESIS by SEKOUBA BENGALY Submitted to the Graduate College of Texas A&M University in partial fulfillment of the requirements... for the degree of MASTER OF SCIENCE December 1987 Major Subject: Entomology ESTIMATING AND CONTROLLING GULF COAST TICKS, AMBLYOMMA MACULATUM KOCH, ON THE COASTAL PRAIRIE OF TEXAS. A Thesis by SEKOUBA BENGALY P te D. Teel (C i an of Committee) son Dar...

  2. aphis craccivora koch: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Commerce in der Versicherungswirtschaft In: VW In: Versicherungsbetriebe (29) 1999, H. 2, S. 42-45 Wagner, F. Koch, G.: Electronic Commerce in der Schler, Axel 13...

  3. araucana molina koch: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Commerce in der Versicherungswirtschaft In: VW In: Versicherungsbetriebe (29) 1999, H. 2, S. 42-45 Wagner, F. Koch, G.: Electronic Commerce in der Schler, Axel 15...

  4. Real-Time Message Routing and Scheduling Ronald Koch1

    E-Print Network [OSTI]

    Nabben, Reinhard

    Real-Time Message Routing and Scheduling Ronald Koch1 , Britta Peis1 , Martin Skutella1.math.tu-berlin.de/coga/ Abstract. Exchanging messages between nodes of a network (e.g., em- bedded computers) is a fundamental issue in real-time systems involving critical routing and scheduling decisions. In order for messages

  5. Interaction of Gulf Coast tick, Amblyomma maculatum Koch, nymphs on cattle

    E-Print Network [OSTI]

    Wexler, Aaron

    2006-10-30T23:59:59.000Z

    Concern over the vector potential of the Gulf Coast tick, Amblyomma maculatum Koch, with the pathogen Ehrlichia ruminantium Dumler, causative agent of the disease heartwater, has increased the need for fundamental knowledge of tick ecology...

  6. A Fractal Comparison of M.C. Escher's and H. von Koch's Tessellations

    E-Print Network [OSTI]

    Colorado at Boulder, University of

    A Fractal Comparison of M.C. Escher's and H. von Koch's Tessellations B. Van Dusen1 , B.C. Scannell determined by hyperbolic geometry, his work is often mistakenly described as following fractal geometry. Here, we perform a `box-counting' scaling analysis on Circle Limit III and an equivalent mono- fractal

  7. The quantification of blackmargined aphid (Monellia caryella (Fitch)) honeydew production in pecan (Carya illinoinensis (Koch)) in Texas

    E-Print Network [OSTI]

    Honaker, Jessica Marie

    2009-05-15T23:59:59.000Z

    Field studies of the blackmargined aphid, Monellia caryella (Fitch), were conducted on three cultivars, ‘Cheyenne’, ‘Kiowa’, and ‘Pawnee’, of pecan, Carya illinoinensis (Koch). Aphid density and natural enemy (lacewings, ladybird beetles...

  8. The quantification of blackmargined aphid (Monellia caryella (Fitch)) honeydew production in pecan (Carya illinoinensis (Koch)) in Texas

    E-Print Network [OSTI]

    Honaker, Jessica Marie

    2008-10-10T23:59:59.000Z

    QUANTIFICATION OF BLACKMARGINED APHID (MONELLIA CARYELLA (FITCH)) HONEYDEW PRODUCTION IN PECAN (CARYA ILLINOINENSIS (KOCH)) IN TEXAS A Thesis by JESSICA MARIE HONAKER Submitted to the Office of Graduate Studies of Texas A... IN PECAN (CARYA ILLINOINENSIS (KOCH)) IN TEXAS A Thesis by JESSICA MARIE HONAKER Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE Approved...

  9. POWER SPECTRUM ANALYSIS OF MTNEURONS FROM AWAKE MONKEY W. Bair, C. Koch, W. Newsome 1 , K. Britten 1 ,

    E-Print Network [OSTI]

    Bair, Wyeth

    POWER SPECTRUM ANALYSIS OF MTNEURONS FROM AWAKE MONKEY W. Bair, C. Koch, W. Newsome 1 , K. Britten 1 , E. Niebur \\Lambda . Computation and Neural Systems, Caltech, Pasadena, CA 91125; Dept­related 30--70 Hz oscillations observed in cat V1. We investi­ gated temporal fine structure of single cell

  10. The Emergence and Complexity of Life Speakers L to R in order of appearance: Terrence Deacon, Bill Schopf, Steven Benner, Wallace Marshall, Sara Seager, Christof Koch

    E-Print Network [OSTI]

    Schopf, Steven Benner, Wallace Marshall, Sara Seager, Christof Koch Where did we come from? WhatOnday,OcTObER15 Wallace Marshall's work is focused on the engineering design principles that underly cellular

  11. Influence of application methods and varying rates of uniconazol on the vegetative and reproductive response of pecan trees, Carya illinoensis (Wang) K. Koch

    E-Print Network [OSTI]

    Graham, Charles Jordan

    1990-01-01T23:59:59.000Z

    &M University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE May 1990 Major Subject: Horticulture INFLUENCE OF APPLICATION METHODS AND VARYING RATES OF UNICONAZOL ON THE VEGETATIVE AND REPRODUCTIVE RESPONSE OF PECAN TREES... Influence of Application Methods and Varying Rates of Uniconazol on the Vegetative and Reproductive Response of Pecan Trees, Carya illinoensis (Wang) K. Koch. (May 1990) Charles Jordan Graham, B. S. , Texas ARM University Chair of Advisory Committee: Dr...

  12. Potential application of a Gulf Coast Tick, Amblyomma maculatum Koch, Aggregation-Attachment-Pheromone for surveillance of free-living adults

    E-Print Network [OSTI]

    Kim, Hee Jung

    2005-02-17T23:59:59.000Z

    between Oklahoma and Texas strains of Gulf Coast ticks. iv The activity of AAP from fed male Gulf Coast ticks was confirmed using two bioassay techniques. A petri dish bioassay revealed significantly higher numbers of female Gulf Coast... of Texas and Oklahoma fed Gulf Coast ticks, Amblyomma maculatum Koch, at three collection intervals???.?????????????. 13 4 Diagram of double screened petri dish for exposed unfed male ticks used for solid-phase microextraction headspace collection...

  13. Rejuvenation of a mature pecan (Carya illinoensis (Wang) K. Koch) orchard

    E-Print Network [OSTI]

    Managan, Penny Kay

    1984-01-01T23:59:59.000Z

    . Benton Storey The effects of 3 tree size reduction treatments were studied during the 1983 and 1984 growing seasons. A total of 265 24-year- old trees in the Brazos River flood plain located on the Adriance Research Pecan Orchard on the Texas A...&M University Plantation were used to conduct this research. Measured trees included 'Desirable' and 'Stuart' trees stratigically located in the center of each plot. The treatments included: (a) control trees, (b) trees in which 30X of the large limbs were...

  14. The development of resistance to organophosphorus compounds by Tetranychus (T.) urticae Koch and laboratory and field toxicological responses of Tetranychus (T.) Cinnabarinus (Boisduval) to some current acaricides

    E-Print Network [OSTI]

    Contreras Galvez, Saul Edgardo

    1971-01-01T23:59:59.000Z

    conducted to study the toxicological responses of an organophosphorus-re- I. t ot ' ) Ld 't )~th (T. ) nus to Mobil NC-4044, DuPont 1410-1, e Chion, and di azi non, and the results were compared with a standard acaricide, monocrotophos. Spider mites... to monocrotophos. They had an intermediate resistance to Mobil MC-4044 and DuPont 1410-L, and were somewhat more resistant to ethion and diazinon. Field evaluations for control of organophosphorus- resistant carmine spider mites were also conducted. Carzol, 1...

  15. Direct versus Facility Centric Load Control for Automated Demand Response

    E-Print Network [OSTI]

    Piette, Mary Ann

    2010-01-01T23:59:59.000Z

    applications. Mary Ann Piette is a Staff Scientist atResponse Ed Koch, Akuacom Mary Ann Piette, Lawrence BerkeleyCA 94903 ed@akuacom.com Mary Ann Piette Lawrence Berkeley

  16. Dream controller

    DOE Patents [OSTI]

    Cheng, George Shu-Xing; Mulkey, Steven L; Wang, Qiang; Chow, Andrew J

    2013-11-26T23:59:59.000Z

    A method and apparatus for intelligently controlling continuous process variables. A Dream Controller comprises an Intelligent Engine mechanism and a number of Model-Free Adaptive (MFA) controllers, each of which is suitable to control a process with specific behaviors. The Intelligent Engine can automatically select the appropriate MFA controller and its parameters so that the Dream Controller can be easily used by people with limited control experience and those who do not have the time to commission, tune, and maintain automatic controllers.

  17. Project Controls

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1997-03-28T23:59:59.000Z

    Project controls are systems used to plan, schedule, budget, and measure the performance of a project/program. The cost estimation package is one of the documents that is used to establish the baseline for project controls. This chapter gives a brief description of project controls and the role the cost estimation package plays.

  18. Ground Control

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Control Also inside this issue: Special Science Call Projects Underway Two Postdoc Opportunities Announced Brown Carbon Review Paper Published Understanding Metal Reduction...

  19. Embedded Controllers Control. Connectivity. Security.

    E-Print Network [OSTI]

    Grantner, Janos L.

    Application Summary MCF5282 HVAC and Security Control Panel Application Summary MCF5307 Music Media Player controllers to help get their products to market quickly and cost-effectively. Aggressive price of continuous innovative technology--provides customers with the opportunity to build market share

  20. Circumventing Control

    E-Print Network [OSTI]

    Pospichal, Todd

    2011-04-13T23:59:59.000Z

    My creative process emerges from the struggle between two contrasting impulses: a habitual desire to control my internal and external environments, and an instinctive need to overcome these constraints. The discoveries I have made in the studio have...

  1. The Capacity Loss of Dense Constellations Tobias Koch

    E-Print Network [OSTI]

    high SNR, our results recover the power loss of 1.53dB for square signal constellations without-noise channels for suitably high signal- to-noise ratio. Our expression for the capacity loss recovers the power loss of 1.53dB for square signal constellations. I. INTRODUCTION As it is well known, the channel

  2. CONTROL STRUCTURE DESIGN IN PROCESS CONTROL SYSTEMS

    E-Print Network [OSTI]

    Johansson, Karl Henrik

    CONTROL STRUCTURE DESIGN IN PROCESS CONTROL SYSTEMS Karl Henrik Johansson Department of EECS of Automatic Control Lund University, Sweden tore@control.lth.se Abstract: The control configuration problem industrial control problems. Copyright c 2000 IFAC 1. INTRODUCTION Autonomy in process control systems

  3. Controlling Fleas

    E-Print Network [OSTI]

    Merchant, Michael E.; Robinson, James V.

    2006-12-18T23:59:59.000Z

    Controlling Fleas Mike Merchant and James Robinson* F leas are small, wingless insects that feed on the blood of animals and people. Americans spend about $9 billion a year controlling fleas ? one of the biggest expenses for pet owners. In Texas... pet bedding regularly and vacuum thoroughly. Vacuuming removes up to 30 per- cent of the larvae and up to 60 percent of flea eggs from a carpet, as well as the larvae?s food supply of dried blood. Vacuum under furniture, cushions, chairs, beds...

  4. Finance & Administration Controller's Office

    E-Print Network [OSTI]

    Weston, Ken

    Finance & Administration Controller's Office April 2014 Michael Williams Controller Controller ICOFA 61318 Revised: 4/4/2014 #12;Finance & Administration Controller's Office Accounting & Asset Coordinator Property Surplus Sales 81269 Revised: 4/4/2014 #12;Finance & Administration Controller's Office

  5. Version Control

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over OurThe Iron SpinPrincetonUsing Maps1 - USAFof EnergyVendorwinsVenue and Control

  6. Heliostat control

    DOE Patents [OSTI]

    Kaehler, James A. (Littleton, CO)

    1984-01-01T23:59:59.000Z

    An improvement in a system and method of controlling heliostat in which the heliostat is operable in azimuth and elevation by respective stepper motors and including the respective steps or means for calculating the position for the heliostat to be at a commanded position, determining the number of steps in azimuth and elevation for each respective motor to get to the commanded position and energizing both the azimuth and elevation stepper motors to run in parallel until predetermined number of steps away from the closest commanded position in azimuth and elevation so that the closest position has been achieved, and thereafter energizing only the remaining motor to bring it to its commanded position. In this way, the heliostat can be started from a stowed position in the morning and operated by a computer means to its commanded position and kept correctly oriented throughout the day using only the time of the day without requiring the usual sensors and feedback apparatus. A computer, or microprocessor, can then control a plurality of many heliostats easily and efficiently throughout the day.

  7. Microprocessor-Based Controllers Enhance Process Control

    E-Print Network [OSTI]

    Hall, G. F.

    1984-01-01T23:59:59.000Z

    -pIus-integral-plus derivative (PID) control with more sophisticated control strategies intended to increase energy efficiency, unit throughput, and/or product yield. Process computers provided the first efficient, cost-effective means of implementing advanced control. However...

  8. Thermal Control & System Integration

    Broader source: Energy.gov [DOE]

    The thermal control and system integration activity focuses on issues such as the integration of motor and power control technologies and the development of advanced thermal control technologies....

  9. Finance & Administration Controller's Office

    E-Print Network [OSTI]

    McQuade, D. Tyler

    Finance & Administration Controller's Office July 2014 Michael Williams Controller Controller Administrative Services 51111 Catherine Hebert Program Director ICOFA 61318 Revised: 7/28/2014 #12;Finance Surplus Property 81269 Revised: 7/28/2014 #12;Finance & Administration Controller's Office Disbursement

  10. Isotopically controlled semiconductors

    E-Print Network [OSTI]

    Haller, Eugene E.

    2006-01-01T23:59:59.000Z

    16 Isotopically Controlled Semiconductors Eugene E. Hallerof isotopically engineered semiconductors; for outstandingisotopically controlled semiconductor crystals. This article

  11. REACTOR OPERATIONS AND CONTROL

    E-Print Network [OSTI]

    Pázsit, Imre

    REACTOR OPERATIONS AND CONTROL KEYWORDS: core calculations, neural networks, control rod elevation of a control rod, or a group of control rods, is an important parameter from the viewpoint of reactor control DETERMINATION OF PWR CONTROL ROD POSITION BY CORE PHYSICS AND NEURAL NETWORK METHODS NINOS S. GARIS* and IMRE

  12. Incoherent Control of Locally Controllable Quantum Systems

    E-Print Network [OSTI]

    Daoyi Dong; Chenbin Zhang; Herschel Rabitz; Alexander Pechen; Tzyh-Jong Tarn

    2008-10-21T23:59:59.000Z

    An incoherent control scheme for state control of locally controllable quantum systems is proposed. This scheme includes three steps: (1) amplitude amplification of the initial state by a suitable unitary transformation, (2) projective measurement on the amplified state, and (3) final optimization by a unitary controlled transformation. The first step increases the amplitudes of some desired eigenstates and the corresponding probability of observing these eigenstates, the second step projects, with high probability, the amplified state into a desired eigenstate, and the last step steers this eigenstate into the target state. Within this scheme, two control algorithms are presented for two classes of quantum systems. As an example, the incoherent control scheme is applied to the control of a hydrogen atom by an external field. The results support the suggestion that projective measurements can serve as an effective control and local controllability information can be used to design control laws for quantum systems. Thus, this scheme establishes a subtle connection between control design and controllability analysis of quantum systems and provides an effective engineering approach for controlling quantum systems with partial controllability information.

  13. Optimal control of controllable switched systems

    E-Print Network [OSTI]

    Rinehart, Michael David

    2005-01-01T23:59:59.000Z

    Many of the existing techniques for controlling switched systems either require the solution to a complex optimization problem or significant sacrifices to either stability or performance to offer practical controllers. ...

  14. Quantum feedback control and classical control theory

    SciTech Connect (OSTI)

    Doherty, Andrew C. [Department of Physics, University of Auckland, Private Bag 92019, Auckland, (New Zealand)] [Department of Physics, University of Auckland, Private Bag 92019, Auckland, (New Zealand); Habib, Salman [Theoretical Division, T-8, Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States)] [Theoretical Division, T-8, Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States); Jacobs, Kurt [Theoretical Division, T-8, Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States)] [Theoretical Division, T-8, Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States); Mabuchi, Hideo [Norman Bridge Laboratory of Physics 12-33, California Institute of Technology, Pasadena, California 91125 (United States)] [Norman Bridge Laboratory of Physics 12-33, California Institute of Technology, Pasadena, California 91125 (United States); Tan, Sze M. [Department of Physics, University of Auckland, Private Bag 92019, Auckland, (New Zealand)] [Department of Physics, University of Auckland, Private Bag 92019, Auckland, (New Zealand)

    2000-07-01T23:59:59.000Z

    We introduce and discuss the problem of quantum feedback control in the context of established formulations of classical control theory, examining conceptual analogies and essential differences. We describe the application of state-observer-based control laws, familiar in classical control theory, to quantum systems and apply our methods to the particular case of switching the state of a particle in a double-well potential. (c) 2000 The American Physical Society.

  15. Quantum Control Theory

    E-Print Network [OSTI]

    Matthew James

    2014-06-20T23:59:59.000Z

    This paper explains some fundamental ideas of {\\em feedback} control of quantum systems through the study of a relatively simple two-level system coupled to optical field channels. The model for this system includes both continuous and impulsive dynamics. Topics covered in this paper include open and closed loop control, impulsive control, optimal control, quantum filtering, quantum feedback networks, and coherent feedback control.

  16. LOCAL LINEAR PID CONTROLLERS FOR NONLINEAR CONTROL

    E-Print Network [OSTI]

    Slatton, Clint

    1 LOCAL LINEAR PID CONTROLLERS FOR NONLINEAR CONTROL Jing Lan1, Jeongho Cho1, Deniz Erdogmus2, Jos}@cnel.ufl.edu, derdogmus@ieee.org, m.a.motter@larc.nasa.gov Abstract Nonlinear PID design is difficult if one approaches modeling approach with traditional linear PID controller design techniques to arrive at a principled

  17. EXPORT CONTROLS PREPARED BY

    E-Print Network [OSTI]

    Sorin, Eric J.

    EXPORT CONTROLS MANUAL PREPARED BY: Office of General Counsel The California State University SEPTEMBER 2012 #12; Export Controls Manual Table of Contents I. INTRODUCTION ......................................................................................................... 1 II. HISTORY OF EXPORT CONTROLS

  18. Ground Control | EMSL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Ground Control Ground Control Released: April 22, 2015 EMSL scientists develop new methods to dig deeper into soil organic matter International Year of the Soils Under our feet...

  19. Voltage Control Technical Conference

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Intro Voltage Control Conference - BPA Active Power Control in Wind Parks - Siemens Interconnection Criteria for Frequency Response Requirements - NERC Model Validation...

  20. Internal Controls Evaluations

    Broader source: Energy.gov (indexed) [DOE]

    iPortal Space. III. GAO Standards for Internal Control in the Federal Government In 1999, GAO issued revised Standards for Internal Control in the Federal Government. This...

  1. Retrofit Diesel Emissions Control System Providing 50% NOxControl...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Diesel Emissions Control System Providing 50% NOxControl Retrofit Diesel Emissions Control System Providing 50% NOxControl 2005 Diesel Engine Emissions Reduction (DEER) Conference...

  2. An Introduction to Quantum Control

    E-Print Network [OSTI]

    James, Matthew

    , stochastic control, quantum control, systems biology, networks, etc modern control #12;Quantum Control: Control of physical systems whose behaviour is dominated by the laws of quantum mechanics. 2003: Dowling of Quantum Control: controller quantum system control actions #12;· Closed loop - control actions depend

  3. Nuclear reactor control apparatus

    SciTech Connect (OSTI)

    Sridhar, B.N.

    1981-08-28T23:59:59.000Z

    Nuclear reactor core safety rod release apparatus comprises a control rod having a detent notch in the form of an annular peripheral recess at its upper end, a control rod support tube for raising and lowering the control rod under normal conditions, latches pivotally mounted on the control support tube with free ends thereof normally disposed in the recess in the control rod, and cam means for pivoting the latches out of the recess in the control rod when a scram condition occurs. One embodiment of the invention comprises an additonal magnetically-operated latch for releasing the control rod under two different conditions, one involving seismic shock.

  4. Nuclear reactor control apparatus

    DOE Patents [OSTI]

    Sridhar, Bettadapur N. (Cupertino, CA)

    1983-11-01T23:59:59.000Z

    Nuclear reactor core safety rod release apparatus comprises a control rod having a detent notch in the form of an annular peripheral recess at its upper end, a control rod support tube for raising and lowering the control rod under normal conditions, latches pivotally mounted on the control support tube with free ends thereof normally disposed in the recess in the control rod, and cam means for pivoting the latches out of the recess in the control rod when a scram condition occurs. One embodiment of the invention comprises an additional magnetically-operated latch for releasing the control rod under two different conditions, one involving seismic shock.

  5. Undergraduate reactor control experiment

    SciTech Connect (OSTI)

    Edwards, R.M.; Power, M.A.; Bryan, M. (Pennsylvania State Univ., University Park (United States))

    1992-01-01T23:59:59.000Z

    A sequence of reactor and related experiments has been a central element of a senior-level laboratory course at Pennsylvania State University (Penn State) for more than 20 yr. A new experiment has been developed where the students program and operate a computer controller that manipulates the speed of a secondary control rod to regulate TRIGA reactor power. Elementary feedback control theory is introduced to explain the experiment, which emphasizes the nonlinear aspect of reactor control where power level changes are equivalent to a change in control loop gain. Digital control of nuclear reactors has become more visible at Penn State with the replacement of the original analog-based TRIGA reactor control console with a modern computer-based digital control console. Several TRIGA reactor dynamics experiments, which comprise half of the three-credit laboratory course, lead to the control experiment finale: (a) digital simulation, (b) control rod calibration, (c) reactor pulsing, (d) reactivity oscillator, and (e) reactor noise.

  6. Policy on Export Controls Export Control Policy

    E-Print Network [OSTI]

    Sridhar, Srinivas

    Policy on Export Controls 8/5/2014 Export Control Policy I. Purpose and Scope Northeastern, the export of certain goods, information, technology and services is restricted for reasons relating to U.S. national security, economic interests, and foreign policy goals. The export laws and regulations address

  7. MODELING AND CONTROL OF THERMOSTATICALLY CONTROLLED LOADS

    E-Print Network [OSTI]

    Hiskens, Ian A.

    controlled loads (TCLs) has demonstrated that such load following is feasible, but analyt- ical models) is well matched to the role of load following. Re- search into the behavior of TCLs began with the work was then employed in a minimum variance control law to demonstrate the load following capability of a population

  8. OCTOBER 2013 IEEE CONTROL SYSTEMS MAGAZINE 23 PEOPLE IN CONTROL

    E-Print Network [OSTI]

    Benmei, Chen

    -related journals including Automatica, Systems and Control Letters, and IEEE Transac- tions on Automatic Control Transactions on Automatic Control, Automatica, System and Control Letters, and European Journal of ControlOCTOBER 2013 « IEEE CONTROL SYSTEMS MAGAZINE 23 PEOPLE IN CONTROL « I n this issue of IEEE Control

  9. PDX diagnostic control system

    SciTech Connect (OSTI)

    Mika, R.

    1981-01-01T23:59:59.000Z

    This paper describes a computer-base diagnostic control system operating on the PDX Tokamak. The prime function of the system is to control mechanical positioning devices associated with various diagnostics including Thomson Scattering, X-Ray Pulse Height Analyzer, Rotating Scanning Monochromator, Fast Ion Detection Experiment, Bolometers and Plasma Limiters. The diagnostic control system consists of a PDP-11/34 computer, a CAMAC system partitioned between the PDX control room and the PDX machine area, and special electronic control modules developed at PPL. The special modules include a digital closed loop motor controller and user interface control panel for control and status display. A standard control panel was developed for interfacing each system user with the PDP-11/34 computer, through specially developed CAMAC modules.

  10. Control system design method

    DOE Patents [OSTI]

    Wilson, David G. (Tijeras, NM); Robinett, III, Rush D. (Tijeras, NM)

    2012-02-21T23:59:59.000Z

    A control system design method and concomitant control system comprising representing a physical apparatus to be controlled as a Hamiltonian system, determining elements of the Hamiltonian system representation which are power generators, power dissipators, and power storage devices, analyzing stability and performance of the Hamiltonian system based on the results of the determining step and determining necessary and sufficient conditions for stability of the Hamiltonian system, creating a stable control system based on the results of the analyzing step, and employing the resulting control system to control the physical apparatus.

  11. Weighted control systems

    E-Print Network [OSTI]

    Al-Radhi, Adhi Omar

    1974-01-01T23:59:59.000Z

    ) 50 3-10 Defects per Unit Control Charts (Sudden Increase in Number of Defects) 51 3-11 Defects per Unit Control Charts (Slow Increase in Number of Defects) 52 3-12 O. C. Curves of Fraction Defectives Control Charts. 54 3-13 O. C. Curves.... The exponential smoothing principle was introduced to quality control field in 1959. It was first adapted in the mean control chart [25]. Through this control system, the most recent information is weighted and combined with the weighted past observations. 10...

  12. Generic device controller for accelerator control systems

    SciTech Connect (OSTI)

    Mariotti, R.; Buxton, W.; Frankel, R.; Hoff, L.

    1987-01-01T23:59:59.000Z

    A new distributed intelligence control system has become operational at the AGS for transport, injection, and acceleration of heavy ions. A brief description of the functionality of the physical devices making up the system is given. An attempt has been made to integrate the devices for accelerator specific interfacing into a standard microprocessor system, namely, the Universal Device Controller (UDC). The main goals for such a generic device controller are to provide: local computing power; flexibility to configure; and real time event handling. The UDC assemblies and software are described. (LEW)

  13. Use of Institutional Controls

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2003-04-09T23:59:59.000Z

    The Policy ensures that the Department of Energy will use institutional controls in the management of resources, facilities and properties under its control, and in implementing its programmatic responsibilities. Certified 1-28-11.

  14. Generalized Linear Quadratic Control

    E-Print Network [OSTI]

    Gattami, Ather Said

    We consider the problem of stochastic finite- and infinite-horizon linear quadratic control under power constraints. The calculations of the optimal control law can be done off-line as in the classical linear quadratic ...

  15. Portable controls experiments

    E-Print Network [OSTI]

    Larson, Richard Winston

    2012-01-01T23:59:59.000Z

    Experiments for controls classes like MIT's 2.004 require large lab setups and expensive equipment such as oscilloscopes and function generators. We developed a series of controls experiments based on National Instruments' ...

  16. Knowledge-based control

    E-Print Network [OSTI]

    Painter, John H.

    1992-03-17T23:59:59.000Z

    Knowledge-based control is defined here as the management of dynamic systems whose states admit qualitative modeling. Contributions from several disparate disciplines, such as artificial intelligence, the decision sciences, and fuzzy control...

  17. Microcomputers in Process Control 

    E-Print Network [OSTI]

    Vinson, D. R.; Chatterjee, N.

    1986-01-01T23:59:59.000Z

    demand control, pipeline pressure control, product rate changes, 5tart-up and shutdown optimization, and time-of-day production rate control. The ultimate objective is for operators to specify a minimum of required parameters and let the computer..., while the computer system is divided into digital/analog conversion gear and the computer system itself. In general, there are four major types of DOC computer compatible baseline control system used today: 1. Pneumatic transmitters, analog...

  18. Control Measures: Proper control measures ensure that

    E-Print Network [OSTI]

    Jia, Songtao

    during operation & maintenance. Engineering: Warning lights, Shutters/Attenuators, Beam Housings, Interlocks, Laser Curtains, Remote Firing Controls Administrative: Training, Written Standard Operating Procedures (SOPs), Posting Warnings Signs/Labels, & PPE. Personal Protective Equipment (PPE): Laser

  19. Complex Networked Control Systems

    E-Print Network [OSTI]

    buildings, modern control systems are increasingly incorporating communication networks in feedback loops [5Complex Networked Control Systems W e live and operate in a networked world. We drive to work on the performance of feedback control systems [5], [6]. Signifi- cant attention is focused on devising local

  20. Demand Controlled Ventilation for Improved Humidity Control

    E-Print Network [OSTI]

    Rogers, J. K.

    1996-01-01T23:59:59.000Z

    Demand Controlled Ventilation for Improved Humidity Control James K. Rogers, P.E. One Blacksmith Road Chelmsford, Massachusetts ABSTRACT Recently introduced technology makes it possible to continuously monitor for humidity in numerous... is brought in for ventilation. The high "latent load" inherent in this hot, humid outside air is often the reason for installing excess chiller capacity and the cause of peak power demands. Recent concerns over poor indoor air quality (IAQ) due...

  1. Control and optimization system

    DOE Patents [OSTI]

    Xinsheng, Lou

    2013-02-12T23:59:59.000Z

    A system for optimizing a power plant includes a chemical loop having an input for receiving an input parameter (270) and an output for outputting an output parameter (280), a control system operably connected to the chemical loop and having a multiple controller part (230) comprising a model-free controller. The control system receives the output parameter (280), optimizes the input parameter (270) based on the received output parameter (280), and outputs an optimized input parameter (270) to the input of the chemical loop to control a process of the chemical loop in an optimized manner.

  2. Water heater control module

    DOE Patents [OSTI]

    Hammerstrom, Donald J

    2013-11-26T23:59:59.000Z

    An advanced electric water heater control system that interfaces with a high temperature cut-off thermostat and an upper regulating thermostat. The system includes a control module that is electrically connected to the high-temperature cut-off thermostat and the upper regulating thermostat. The control module includes a switch to open or close the high-temperature cut-off thermostat and the upper regulating thermostat. The control module further includes circuitry configured to control said switch in response to a signal selected from the group of an autonomous signal, a communicated signal, and combinations thereof.

  3. Efficiently Controllable Graphs

    E-Print Network [OSTI]

    Can Gokler; Kevin Thompson; Peter Shor; Seth Lloyd

    2015-03-18T23:59:59.000Z

    We show that universal quantum computation can be performed efficiently on quantum networks while the fraction of controlled subsystems vanishes as the network grows larger. We provide examples of quantum spin network families admitting polynomial quantum gate complexity with a vanishing fraction of controlled spins. We define a new family of graphs, the efficiently controllable family, which admits efficient computation with vanishing fraction of controls. We explore generalizations to percolation clusters, fractals and random graphs. We show that the classical computational complexity of estimating the ground state of Hamiltonians described by controllable graphs is polynomial in the number of subsystems/qubits.

  4. Export Control | ornl.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Export Control SHARE Export Control ORNL's Nuclear Security and Isotope Technology Division Export Control Team promotes the U.S. nonproliferation agenda by providing policy...

  5. Modeling and control of thermostatically controlled loads

    SciTech Connect (OSTI)

    Backhaus, Scott N [Los Alamos National Laboratory; Sinitsyn, Nikolai [Los Alamos National Laboratory; Kundu, S. [UNIV OF MICHIGAN; Hiskens, I. [UNIV OF MICHIGAN

    2011-01-04T23:59:59.000Z

    As the penetration of intermittent energy sources grows substantially, loads will be required to play an increasingly important role in compensating the fast time-scale fluctuations in generated power. Recent numerical modeling of thermostatically controlled loads (TCLs) has demonstrated that such load following is feasible, but analytical models that satisfactorily quantify the aggregate power consumption of a group of TCLs are desired to enable controller design. We develop such a model for the aggregate power response of a homogeneous population of TCLs to uniform variation of all TCL setpoints. A linearized model of the response is derived, and a linear quadratic regulator (LQR) has been designed. Using the TCL setpoint as the control input, the LQR enables aggregate power to track reference signals that exhibit step, ramp and sinusoidal variations. Although much of the work assumes a homogeneous population of TCLs with deterministic dynamics, we also propose a method for probing the dynamics of systems where load characteristics are not well known.

  6. Dynamical tunneling and control

    E-Print Network [OSTI]

    Srihari Keshavamurthy

    2011-07-25T23:59:59.000Z

    This article summarizes the recent work on the influence of dynamical tunneling on the control of quantum systems. Specifically, two examples are discussed. In the first, it is shown that the bichromatic control of tunneling in a driven double well system is hampered by the phenomenon of chaos-assisted tunneling. The bichromatic control landscape exhibits several regions indicating lack of control with every such region involving chaos-assisted tunneling. The second example illustrates the failure of controlling the dissociation dynamics of a driven Morse oscillator due to the phenomenon of resonance-assisted tunneling. In particular, attempts to control the dissociation dynamics by rebuilding local phase space barriers are foiled due to resonance-assisted tunneling.

  7. Nuclear reactor control

    DOE Patents [OSTI]

    Cawley, William E. (Phoenix, AZ); Warnick, Robert F. (Pasco, WA)

    1982-01-01T23:59:59.000Z

    1. In a nuclear reactor incorporating a plurality of columns of tubular fuel elements disposed in horizontal tubes in a mass of graphite wherein water flows through the tubes to cool the fuel elements, the improvement comprising at least one control column disposed in a horizontal tube including fewer fuel elements than in a normal column of fuel elements and tubular control elements disposed at both ends of said control column, and means for varying the horizontal displacement of the control column comprising a winch at the upstream end of the control column and a cable extending through the fuel and control elements and attached to the element at the downstream end of the column.

  8. Fusion reactor control

    SciTech Connect (OSTI)

    Plummer, D.A.

    1995-12-31T23:59:59.000Z

    The plasma kinetic temperature and density changes, each per an injected fuel density rate increment, control the energy supplied by a thermonuclear fusion reactor in a power production cycle. This could include simultaneously coupled control objectives for plasma current, horizontal and vertical position, shape and burn control. The minimum number of measurements required, use of indirect (not plasma parameters) system measurements, and distributed control procedures for burn control are to be verifiable in a time dependent systems code. The International Thermonuclear Experimental Reactor (ITER) has the need to feedback control both the fusion output power and the driven plasma current, while avoiding damage to diverter plates. The system engineering of fusion reactors must be performed to assure their development expeditiously and effectively by considering reliability, availability, maintainability, environmental impact, health and safety, and cost.

  9. Nuclear reactor control

    SciTech Connect (OSTI)

    Cawley, W.E.; Warnick, R.F.

    1982-03-30T23:59:59.000Z

    In a nuclear reactor incorporating a plurality of columns of tubular fuel elements disposed in horizontal tubes in a mass of graphite wherein water flows through the tubes to cool the fuel elements, the improvement comprising at least one control column disposed in a horizontal tube including fewer fuel elements than in a normal column of fuel elements and tubular control elements disposed at both ends of said control column, and means for varying the horizontal displacement of the control column comprising a winch at the upstream end of the control column and a cable extending through the fuel and control elements and attached to the element at the downstream end of the column.

  10. Fuzzy logic controller optimization

    DOE Patents [OSTI]

    Sepe, Jr., Raymond B; Miller, John Michael

    2004-03-23T23:59:59.000Z

    A method is provided for optimizing a rotating induction machine system fuzzy logic controller. The fuzzy logic controller has at least one input and at least one output. Each input accepts a machine system operating parameter. Each output produces at least one machine system control parameter. The fuzzy logic controller generates each output based on at least one input and on fuzzy logic decision parameters. Optimization begins by obtaining a set of data relating each control parameter to at least one operating parameter for each machine operating region. A model is constructed for each machine operating region based on the machine operating region data obtained. The fuzzy logic controller is simulated with at least one created model in a feedback loop from a fuzzy logic output to a fuzzy logic input. Fuzzy logic decision parameters are optimized based on the simulation.

  11. An intelligent appliance control

    SciTech Connect (OSTI)

    Maher, C.A. Jr. [Tridelta Industries, Inc., Mentor, OH (United States)] [Tridelta Industries, Inc., Mentor, OH (United States); McMahon, G. [Pitco Frialator, Inc., Concord, NH (United States)] [Pitco Frialator, Inc., Concord, NH (United States)

    1998-05-01T23:59:59.000Z

    This paper describes the use of a microcontroller to implement an adaptive form of an ON/OFF-type control system. The principal benefits that this technique offers are the ability to self adjust automatically to the dynamics of the appliance being controlled and to minimize the cyclic wear and tear on the final heat-control elements. This technique is best applied to those systems with at least one large energy storage element (e.g., thermal mass), not needing fine control of the controlled variable, and ones using ON/OFF (relay type) rather than continuous final control outputs. This profile encompasses a large number of potential applications, particularly in the appliance field.

  12. Control Systems & LEED

    SciTech Connect (OSTI)

    Cooperman, Alissa; Dieckmann, John; Brodrick, James

    2012-06-01T23:59:59.000Z

    This article discusses the LEED guidelines (2009 v3), and corresponding points, that can only be attained using control systems for lighting, HVAC, and/or the entire building. Integrating and centralizing control systems allows for better building management, energy savings and can potentially award 29 points towards certification across the following categories: Sustainable Sites, Energy & Atmosphere, and Indoor Air Quality. In closing, potential energy savings are highlighted and the overall market potential for control systems are summarized.

  13. Microcomputers in Process Control

    E-Print Network [OSTI]

    Vinson, D. R.; Chatterjee, N.

    under optimum process conditions. The difference between the actual performance and the corresponding standard is the difference between "normal" and "best" performance. A computer system's objective is to minimize this difference. Control It has... program evolution, and provides a secure and distinct separation of higher level functions from lower level functions. The baseline control system is further divided into field signal transmission instrumentation and computer compatible controllers...

  14. Control of Eggplant Yellows.

    E-Print Network [OSTI]

    Jones, S. E. (Sloan Earle)

    1942-01-01T23:59:59.000Z

    practical control of eggplant yellows was obtained by keep- ing the plants lightly covered with sulfur dust throughout the time they mere in the seedbed. This treatment plus two or more dust applications after the plants were set in the field gave even... better control of the di- sease, but, the additional applications were not found profitable. Satis- factory control of eggplant yellows was not obtained when dusting was begun after the disease appeared in the field. CONTENTS Page Introduction 5...

  15. Blast furnace stove control

    SciTech Connect (OSTI)

    Muske, K.R. [Villanova Univ., PA (United States). Dept. of Chemical Engineering; Hansen, G.A.; Howse, J.W.; Cagliostro, D.J. [Los Alamos National Lab., NM (United States); Chaubal, P.C. [Inland Steel Industries Inc., East Chicago, IN (United States). Research Labs.

    1998-12-31T23:59:59.000Z

    This paper outlines the process model and model-based control techniques implemented on the hot blast stoves for the No. 7 Blast Furnace at the Inland Steel facility in East Chicago, Indiana. A detailed heat transfer model of the stoves is developed. It is then used as part of a predictive control scheme to determine the minimum amount of fuel necessary to achieve the blast air requirements. The controller also considers maximum and minimum temperature constraints within the stove.

  16. OPTIMAL CONTROL APPLICATIONS AND METHODS Optim. Control Appl. Meth. (2008)

    E-Print Network [OSTI]

    Maurer, Helmut

    2008-01-01T23:59:59.000Z

    control of a CSTR reactor; optimal fishing 1. INTRODUCTION Differential control systems with delays in the state variable. Delays in the control are admitted for systems linear in the control variable. ColoniusOPTIMAL CONTROL APPLICATIONS AND METHODS Optim. Control Appl. Meth. (2008) Published online

  17. THE AVERAGED CONTROL SYSTEM OF FAST OSCILLATING CONTROL SYSTEMS

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    , control systems, small control, optimal control, Finsler geometry. AMS subject classifications. 34C29, 34H used for design. The use of averaging in optimal control of oscillating systems [10, 13, 14, 7THE AVERAGED CONTROL SYSTEM OF FAST OSCILLATING CONTROL SYSTEMS ALEX BOMBRUN AND JEAN

  18. Advanced Rooftop Unit Control

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Advanced-Rooftop-Unit-Control Sign In About | Careers | Contact | Investors | bpa.gov Search Policy & Reporting Expand Policy & Reporting EE Sectors Expand EE Sectors...

  19. Surveillance Guides - Hazards Control

    Broader source: Energy.gov (indexed) [DOE]

    Facility Representative RL Facility Representative Program March 9, 1995 Surveillance Guide Revision 0 Hazard Controls Page 5 of Error Bookmark not defined....

  20. Air Pollution Controls

    Broader source: Energy.gov [DOE]

    Various statutes within the Wisconsin Legislative Documents relate to air pollution control. These statutes describe zoning, permitting, and emissions regulations for hazardous and non-hazardous...

  1. Cooled, temperature controlled electrometer

    DOE Patents [OSTI]

    Morgan, John P. (Idaho Falls, ID)

    1992-01-01T23:59:59.000Z

    A cooled, temperature controlled electrometer for the measurement of small currents. The device employs a thermal transfer system to remove heat from the electrometer circuit and its environment and dissipate it to the external environment by means of a heat sink. The operation of the thermal transfer system is governed by a temperature regulation circuit which activates the thermal transfer system when the temperature of the electrometer circuit and its environment exceeds a level previously inputted to the external variable temperature control circuit. The variable temperature control circuit functions as subpart of the temperature control circuit. To provide temperature stability and uniformity, the electrometer circuit is enclosed by an insulated housing.

  2. Shore Erosion Control (Maryland)

    Broader source: Energy.gov [DOE]

    The Department of Natural Resources is responsible for creating and implementing a program designed to minimize shore erosion through education, erosion control projects, promulgate regulations,...

  3. Controlling Graphene's Electronic Structure

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Controlling Graphene's Electronic Structure Print Wednesday, 25 April 2007 00:00 Graphene, because of its unusual electron properties, reduced dimensionality, and scale, has...

  4. Controlling Graphene's Electronic Structure

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Controlling Graphene's Electronic Structure Print Graphene, because of its unusual electron properties, reduced dimensionality, and scale, has enormous potential for use in...

  5. ALFA Detector Control System

    E-Print Network [OSTI]

    Oleiro Seabra, Luis Filipe; The ATLAS collaboration

    2015-01-01T23:59:59.000Z

    ALFA (Absolute Luminosity For ATLAS) is one of the sub-detectors of ATLAS/LHC. The ALFA system is composed by two stations installed in the LHC tunnel 240 m away from each side of the ATLAS interaction point. Each station has a vacuum and ventilation system, movement control and all the required electronic for signal processing. The Detector Control System (DCS) provides control and monitoring of several components and ensures the safe operation of the detector contributing to good Data Quality. This paper describes the ALFA DCS system including a detector overview, operation aspects and hardware control through a SCADA system, WinCC OA.

  6. ALFA Detector Control System

    E-Print Network [OSTI]

    Oleiro Seabra, Luis Filipe; The ATLAS collaboration

    2015-01-01T23:59:59.000Z

    ALFA (Absolute Luminosity For ATLAS) is one of the sub-detectors of ATLAS (A Toroidal LHC Apparatus). The ALFA system is composed by four stations installed in the LHC tunnel 240 m away from the ATLAS interaction point. Each station has a vacuum and ventilation system, movement control and all the required electronics for signal processing. The Detector Control System (DCS) provides control and monitoring of several components and ensures the safe operation of the detector contributing to good Data Quality. This paper describes the ALFA DCS system including a detector overview, operation aspects and hardware control through a SCADA system, WinCC OA.

  7. Unclassified Controlled Nuclear Information

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1995-09-25T23:59:59.000Z

    To prevent unauthorized dissemination of Unclassified Controlled Nuclear Information (UCNI). Cancels DOE 5635.4 and DOE 5650.3A

  8. Management Control Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2002-04-18T23:59:59.000Z

    To establish requirements and responsibilities for the Department of Energy Management Control Program. Cancels DOE O 413.1. Canceled by DOE O 413.1B.

  9. Controlled Unclassified Information

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3-1 Chapter 13 Controlled Unclassified Information This chapter describes the security procedures adopted by DOE HQ to implement the requirements of the following DOE regulations...

  10. Device Oriented Project Controller

    SciTech Connect (OSTI)

    Dalesio, Leo; Kraimer, Martin

    2013-11-20T23:59:59.000Z

    This proposal is directed at the issue of developing control systems for very large HEP projects. A de-facto standard in accelerator control is the Experimental Physics and Industrial Control System (EPICS), which has been applied successfully to many physics projects. EPICS is a channel based system that requires that each channel of each device be configured and controlled. In Phase I, the feasibility of a device oriented extension to the distributed channel database was demonstrated by prototyping a device aware version of an EPICS I/O controller that functions with the current version of the channel access communication protocol. Extensions have been made to the grammar to define the database. Only a multi-stage position controller with limit switches was developed in the demonstration, but the grammar should support a full range of functional record types. In phase II, a full set of record types will be developed to support all existing record types, a set of process control functions for closed loop control, and support for experimental beam line control. A tool to configure these records will be developed. A communication protocol will be developed or extensions will be made to Channel Access to support introspection of components of a device. Performance bench marks will be made on both communication protocol and the database. After these records and performance tests are under way, a second of the grammar will be undertaken.

  11. Control system design guide

    SciTech Connect (OSTI)

    Sellers, David; Friedman, Hannah; Haasl, Tudi; Bourassa, Norman; Piette, Mary Ann

    2003-05-01T23:59:59.000Z

    The ''Control System Design Guide'' (Design Guide) provides methods and recommendations for the control system design process and control point selection and installation. Control systems are often the most problematic system in a building. A good design process that takes into account maintenance, operation, and commissioning can lead to a smoothly operating and efficient building. To this end, the Design Guide provides a toolbox of templates for improving control system design and specification. HVAC designers are the primary audience for the Design Guide. The control design process it presents will help produce well-designed control systems that achieve efficient and robust operation. The spreadsheet examples for control valve schedules, damper schedules, and points lists can streamline the use of the control system design concepts set forth in the Design Guide by providing convenient starting points from which designers can build. Although each reader brings their own unique questions to the text, the Design Guide contains information that designers, commissioning providers, operators, and owners will find useful.

  12. Advanced Thermal Control

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Potential Thermal Control Technologies Advanced Vehicle Systems Technology Transfer Jet Cooling Alternative Coolants TIM Low R Structure Phase Change Spray Cooling Air Cooling...

  13. Cooled, temperature controlled electrometer

    DOE Patents [OSTI]

    Morgan, John P.

    1992-08-04T23:59:59.000Z

    A cooled, temperature controlled electrometer for the measurement of small currents. The device employs a thermal transfer system to remove heat from the electrometer circuit and its environment and dissipate it to the external environment by means of a heat sink. The operation of the thermal transfer system is governed by a temperature regulation circuit which activates the thermal transfer system when the temperature of the electrometer circuit and its environment exceeds a level previously inputted to the external variable temperature control circuit. The variable temperature control circuit functions as subpart of the temperature control circuit. To provide temperature stability and uniformity, the electrometer circuit is enclosed by an insulated housing.

  14. Radiation Control (Virginia)

    Broader source: Energy.gov [DOE]

    The Department of Health is responsible for regulating radiation and radioactive materials in the Commonwealth of Virginia. Although the Department's Radiation Control Program primarily focuses on...

  15. Creating Value Through Controls

    Energy Savers [EERE]

    DOE SSL R&D Workshop 2014 Sensors and controls Qualitative: Occupant comfort & productivity Positive PR: "going green" Greater consistency in energy savings Easy...

  16. System Protection Control Craftman

    Broader source: Energy.gov [DOE]

    A successful candidate will perform preventative and corrective maintenance on protective relays, revenue meters, telemetering schemes, substation control systems and various kinds of substation...

  17. HCCI engine control and optimization

    E-Print Network [OSTI]

    Killingsworth, Nicholas J.

    2007-01-01T23:59:59.000Z

    Computers in Automatic Control Systems. Fizmatgiz, [26] M.time systems. IEEE Transactions on Automatic Control, 47:

  18. MANDATORY MEASURES INDOOR LIGHTING CONTROLS

    E-Print Network [OSTI]

    California at Davis, University of

    MANDATORY MEASURES INDOOR LIGHTING CONTROLS (Reference: Sub-Chapter 4, Section 130.1) #12;SECTION 4 MANDATORY LIGHTING CONTROLS 1. 130.1 (a) Area Controls: Manual controls that control lighting in each area separately 2. 130.1 (b) Multi-level Controls: Allow occupants to choose the appropriate light level for each

  19. MANDATORY MEASURES INDOOR LIGHTING CONTROLS

    E-Print Network [OSTI]

    California at Davis, University of

    MANDATORY MEASURES INDOOR LIGHTING CONTROLS (Reference: Sub-Chapter 4, Section 130.1) #12;SECTION 3 MANDATORY LIGHTING CONTROLS 1. 130.1 (a) Area Controls: Manual controls that control lighting in each area separately 2. 130.1 (b) Multi-level Controls: "Dimmability." Allow occupants to choose the appropriate light

  20. MANDATORY MEASURES INDOOR LIGHTING CONTROLS

    E-Print Network [OSTI]

    California at Davis, University of

    MANDATORY MEASURES INDOOR LIGHTING CONTROLS (Reference: Sub-Chapter 4, Section 130.1) #12;SECTION 5 MANDATORY LIGHTING CONTROLS 1. Area Controls: Manual controls that control lighting in each area separately 2. Multi-level Controls: Allow occupants to choose the appropriate light level for each area 3. Shut

  1. Control of chaotic advection

    E-Print Network [OSTI]

    Tounsia Benzekri; Cristel Chandre; Xavier Leoncini; Ricardo Lima; Michel Vittot; Arnaud Goullet; Nadine Aubry

    2006-10-03T23:59:59.000Z

    A method of chaos reduction for Hamiltonian systems is applied to control chaotic advection. By adding a small and simple term to the stream function of the system, the construction of invariant tori has a stabilization effect in the sense that these tori act as barriers to diffusion in phase space and the controlled Hamiltonian system exhibits a more regular behaviour.

  2. Contamination Control Techniques

    SciTech Connect (OSTI)

    EBY, J.L.

    2000-05-16T23:59:59.000Z

    Welcome to a workshop on contamination Control techniques. This work shop is designed for about two hours. Attendee participation is encouraged during the workshop. We will address different topics within contamination control techniques; present processes, products and equipment used here at Hanford and then open the floor to you, the attendees for your input on the topics.

  3. CONTROL OF HAPTIC INTERACTION

    E-Print Network [OSTI]

    Twente, Universiteit

    #12;Dit proefschrift is goedgekeurd door: Prof.dr.ir. S. Stramigioli, promotor Dr. S. Misra, assistent Assistant-promotor: Dr. S. Misra Control Engineering University of Twente, Enschede, the Netherlands and Robotics University of Twente, Enschede, the Netherlands Prof. dr. ir. J. van Amerongen Control Engineering

  4. Stepping motor controller

    DOE Patents [OSTI]

    Bourret, S.C.; Swansen, J.E.

    1982-07-02T23:59:59.000Z

    A stepping motor is microprocessor controlled by digital circuitry which monitors the output of a shaft encoder adjustably secured to the stepping motor and generates a subsequent stepping pulse only after the preceding step has occurred and a fixed delay has expired. The fixed delay is variable on a real-time basis to provide for smooth and controlled deceleration.

  5. Burner control system

    SciTech Connect (OSTI)

    Cade, P.J.

    1981-01-06T23:59:59.000Z

    A burner control apparatus for use with a furnace installation that has an operating control to produce a request for burner operation, a flame sensor to produce a signal when flame is present in the monitored combustion chamber, and one or more devices for control of ignition and/or fuel flow. The burner control apparatus comprises lockout apparatus for de-energizing the control apparatus, a control device for actuating the ignition and/or fuel control devices, and a timing circuit that provides four successive and partially overlapping timing intervals of precise relation, including a purge timing interval, a pilot ignition interval, and a main fuel ignition interval. The present invention further includes a burner control system which verifies the proper operation of certain sensors in a burner or furnace including particularly the air flow sensor. Additionally, the present system also prevents an attempt to ignite a burner if a condition is detected which indicates that the air flow sensor has been bypassed or wedged in the actuated position.

  6. Fluid delivery control system

    DOE Patents [OSTI]

    Hoff, Brian D.; Johnson, Kris William; Algrain, Marcelo C.; Akasam, Sivaprasad

    2006-06-06T23:59:59.000Z

    A method of controlling the delivery of fluid to an engine includes receiving a fuel flow rate signal. An electric pump is arranged to deliver fluid to the engine. The speed of the electric pump is controlled based on the fuel flow rate signal.

  7. CONTRIBUTED Adaptive Stochastic Control

    E-Print Network [OSTI]

    Powell, Warren B.

    sources, many forms of energy storage, and microgrid management (see Fig. 1). Computationally, controlling of distributed generation and storage within the Smart Grid. KEYWORDS | Adaptive stochastic control (ASC.g., factory assembly lines, petrochemical plants, and nuclear power plants). Below we describe

  8. Neural daylight control system

    E-Print Network [OSTI]

    Grif, Horatiu Stefan

    2010-01-01T23:59:59.000Z

    The paper describes the design, the implementation of a neural controller used in an automatic daylight control system. The automatic lighting control system (ALCS) attempt to maintain constant the illuminance at the desired level on working plane even if the daylight contribution is variable. Therefore, the daylight will represent the perturbation signal for the ALCS. The mathematical model of process is unknown. The applied structure of control need the inverse model of process. For this purpose it was used other artificial neural network (ANN) which identify the inverse model of process in an on-line manner. In fact, this ANN identify the inverse model of process + the perturbation signal. In this way the learning signal for neural controller has a better accuracy for the present application.

  9. CAVITY CONTROL ALGORITHM

    SciTech Connect (OSTI)

    Tomasz Plawski, J. Hovater

    2010-09-01T23:59:59.000Z

    A digital low level radio frequency (RF) system typically incorporates either a heterodyne or direct sampling technique, followed by fast ADCs, then an FPGA, and finally a transmitting DAC. This universal platform opens up the possibilities for a variety of control algorithm implementations. The foremost concern for an RF control system is cavity field stability, and to meet the required quality of regulation, the chosen control system needs to have sufficient feedback gain. In this paper we will investigate the effectiveness of the regulation for three basic control system algorithms: I&Q (In-phase and Quadrature), Amplitude & Phase and digital SEL (Self Exciting Loop) along with the example of the Jefferson Lab 12 GeV cavity field control system.

  10. Closed Loop System with Feedback Control MISO control laws SISO control law

    E-Print Network [OSTI]

    Ben-Yakar, Adela

    Closed Loop System with Feedback Control MISO control laws SISO control law Switching Control demand · Two control modes for wind turbine: MISO & SISO · Proportional Integral (PI) feedback control Modes MISO SISO Inputs Blade Pitch Angle, Generator Torque Blade Pitch Angle Output Power Power

  11. Common Control System Vulnerability

    SciTech Connect (OSTI)

    Trent Nelson

    2005-12-01T23:59:59.000Z

    The Control Systems Security Program and other programs within the Idaho National Laboratory have discovered a vulnerability common to control systems in all sectors that allows an attacker to penetrate most control systems, spoof the operator, and gain full control of targeted system elements. This vulnerability has been identified on several systems that have been evaluated at INL, and in each case a 100% success rate of completing the attack paths that lead to full system compromise was observed. Since these systems are employed in multiple critical infrastructure sectors, this vulnerability is deemed common to control systems in all sectors. Modern control systems architectures can be considered analogous to today's information networks, and as such are usually approached by attackers using a common attack methodology to penetrate deeper and deeper into the network. This approach often is composed of several phases, including gaining access to the control network, reconnaissance, profiling of vulnerabilities, launching attacks, escalating privilege, maintaining access, and obscuring or removing information that indicates that an intruder was on the system. With irrefutable proof that an external attack can lead to a compromise of a computing resource on the organization's business local area network (LAN), access to the control network is usually considered the first phase in the attack plan. Once the attacker gains access to the control network through direct connections and/or the business LAN, the second phase of reconnaissance begins with traffic analysis within the control domain. Thus, the communications between the workstations and the field device controllers can be monitored and evaluated, allowing an attacker to capture, analyze, and evaluate the commands sent among the control equipment. Through manipulation of the communication protocols of control systems (a process generally referred to as ''reverse engineering''), an attacker can then map out the control system processes and functions. With the detailed knowledge of how the control data functions, as well as what computers and devices communicate using this data, the attacker can use a well known Man-in-the-Middle attack to perform malicious operations virtually undetected. The control systems assessment teams have used this method to gather enough information about the system to craft an attack that intercepts and changes the information flow between the end devices (controllers) and the human machine interface (HMI and/or workstation). Using this attack, the cyber assessment team has been able to demonstrate complete manipulation of devices in control systems while simultaneously modifying the data flowing back to the operator's console to give false information of the state of the system (known as ''spoofing''). This is a very effective technique for a control system attack because it allows the attacker to manipulate the system and the operator's situational awareness of the perceived system status. The three main elements of this attack technique are: (1) network reconnaissance and data gathering, (2) reverse engineering, and (3) the Man-in-the-Middle attack. The details of this attack technique and the mitigation techniques are discussed.

  12. Gaseous reactor control system

    SciTech Connect (OSTI)

    Abdel-Khalik, S.

    1991-09-03T23:59:59.000Z

    This paper describes a nuclear reactor control system for controlling the reactivity of the core of a nuclear reactor. It includes a control gas having a high neutron cross-section; a first tank containing a first supply of the control gas; a first conduit providing a first fluid passage extending into the core, the first conduit being operatively connected to communicate with the first tank; a first valve operatively connected to regulate the flow of the control gas between the first tank and the first conduit; a second conduit concentrically disposed around the first conduit such that a second fluid passage is defined between the outer surface of the first conduit and the inner surface of the second conduit; a second tank containing a second supply of the control gas, the second tank being operatively connected to communicate with the second fluid passage; a second supply valve operatively connected to regulate the flow of the control gas between the second tank and the second fluid passage.

  13. CUNY EXPORT CONTROL PROCEDURES 8. Technology Control Plans (TCPs)

    E-Print Network [OSTI]

    Rosen, Jay

    CUNY EXPORT CONTROL PROCEDURES 8. Technology Control Plans (TCPs) This Section addresses and data from foreign nationals for whom the item is controlled, and would otherwise require an export; physical controls (laboratory security); IT controls (data file/computer access security); deemed export

  14. POWER AND CONTROL WHEELPOWER AND CONTROL WHEEL AND THREATS

    E-Print Network [OSTI]

    Su, Xiao

    physical VIOLENCE sexual POWER AND CONTROL WHEELPOWER AND CONTROL WHEEL POWER AND CONTROL COERCION's life and circumstances. The Power & Control diagram is a particularly helpful tool in understanding for abusive behavior. Saying she caused it. ISOLATION: Controlling what she does, who she sees and talks to

  15. Hypertension Markers Control

    E-Print Network [OSTI]

    Rodriguez, Carlos

    Lyphochek® Hypertension Markers Control Bio-Rad Laboratories I M M U N O A S S A Y C O N T R O L S #12;I M M U N O A S S A Y C O N T R O L S Lyphochek® Hypertension Markers Control A trilevel control with hypertension disorders. · 2 year shelf life at 2­8°C. · 21 day open-vial stability at 2­8°C for most analytes

  16. Flash protection controller

    DOE Patents [OSTI]

    Galbraith, Lee K. (Mountain View, CA)

    1981-01-01T23:59:59.000Z

    A controller provides a high voltage to maintain an electro-optic shutter in a transparent condition until a flash of light which would be harmful to personnel is sensed by a phototransistor. The controller then shorts the shutter to ground to minimize light transmission to the user and maintains light transmission at the pre-flash level for a predetermined time to allow the flash to subside. A log converter and differential trigger circuit keep the controller from being triggered by other light flashes which are not dangerous.

  17. Radiological Control Manual

    SciTech Connect (OSTI)

    Not Available

    1993-04-01T23:59:59.000Z

    This manual has been prepared by Lawrence Berkeley Laboratory to provide guidance for site-specific additions, supplements, and clarifications to the DOE Radiological Control Manual. The guidance provided in this manual is based on the requirements given in Title 10 Code of Federal Regulations Part 835, Radiation Protection for Occupational Workers, DOE Order 5480.11, Radiation Protection for Occupational Workers, and the DOE Radiological Control Manual. The topics covered are (1) excellence in radiological control, (2) radiological standards, (3) conduct of radiological work, (4) radioactive materials, (5) radiological health support operations, (6) training and qualification, and (7) radiological records.

  18. Optimizing Control- A Survey

    E-Print Network [OSTI]

    Preisig, H. A.

    timation Int. J. of Sy,tems Science, 17,No 8, (1986), 1220 C ; Sec comments to Brdys et al. 10 Cutler C.R. & Perry ILT. Rea.l Time Optimization with Multivll.riable Control is Required to Maximize Profits Computcr.! and Chemical Enginccring, 1, No 5....) the constraints .s (K ,11. ,E.) ~ Q where In geneml, the solution to this problem is an optimal control problem since the inputs.ll would be calculated llll a function of time. Optimizing control methods make~ some simplifying 1.18 sumptions about...

  19. Adaptive Street Lighting Controls

    Broader source: Energy.gov [DOE]

    This two-part DOE Municipal Solid-State Street Lighting Consortium webinar focused on LED street lighting equipped with adaptive control components. In Part I, presenters Amy Olay of the City of...

  20. Combustion Air Control

    E-Print Network [OSTI]

    Hughart, C. L.

    1979-01-01T23:59:59.000Z

    The results of boiler control improvement projects may be disappointing due to unrealistic expectations and a failure to recognize the study and analysis required to ensure success. Early recognition of the need for data collection and boiler...

  1. Humidity Control in Residences

    E-Print Network [OSTI]

    Trowbridge, J.; Peterson, J.

    1994-01-01T23:59:59.000Z

    . By introducing a separate vapor compression unit to pre-condition outside air, indoor relative humidity can be controlled. This new air conditioning system combines a ventilation unit with a conventional recirculation air conditioning unit. Although successful...

  2. Well valve control system

    SciTech Connect (OSTI)

    Schwendemann, K.L.; McCracken, O.W.; Mondon, C.G.; Wortham, L.C.

    1987-01-13T23:59:59.000Z

    A system is described for controlling well testing through an upper and lower test string with a subsea test tree connected therebetween and latch means to release the upper test string from the subsea test tree comprising: a. first and second selectively programmable microprocessor means; b. means for storing system operating limits in each microprocessor means; c. means for changing the operating limits in response to changes in well conditions; d. means for communicating operating fluid pressure to the subsurface test tree and the latch means; e. solenoid pilot valves controlling the flow of the operating fluid pressure to the subsea test tree and the latch means; f. the first microprocessor means located at a central control console; g. the second microprocessor means located near the solenoid valves; h. means for transmitting signals between the first and second microprocessor means and validating the accuracy of the signals; and i. electronic circuits to control operation of the solenoid valves in response to validated signals.

  3. Engineering of metabolic control

    DOE Patents [OSTI]

    Liao, James C.

    2004-03-16T23:59:59.000Z

    The invention features a method of producing heterologous molecules in cells under the regulatory control of a metabolite and metabolic flux. The method can enhance the synthesis of heterologous polypeptides and metabolites.

  4. Engineering of metabolic control

    DOE Patents [OSTI]

    Liao, James C.

    2006-10-17T23:59:59.000Z

    The invention features a method of producing heterologous molecules in cells under the regulatory control of a metabolite and metabolic flux. The method can enhance the synthesis of heterologous polypeptides and metabolites.

  5. Controlling Beaver Damage

    E-Print Network [OSTI]

    Texas Wildlife Services

    2007-03-13T23:59:59.000Z

    Beavers are important because their dams stabilize creek flow, slow runoff and create ponds. However, these same dams can negatively alter the flow of creeks. Damage prevention, control and various trapping methods are discussed in this publication....

  6. Controlling Nutria Damage

    E-Print Network [OSTI]

    Texas Wildlife Services

    2007-03-13T23:59:59.000Z

    Nutria are large, semi-aquatic rodents resembling beavers or muskrats. They eat desirable vegetation, girdle trees and burrow into banks and dams. The biological, reproductive and behavioral characteristics of nutria are listed, as well as control...

  7. Combustion Air Control 

    E-Print Network [OSTI]

    Hughart, C. L.

    1979-01-01T23:59:59.000Z

    The results of boiler control improvement projects may be disappointing due to unrealistic expectations and a failure to recognize the study and analysis required to ensure success. Early recognition of the need for data collection and boiler...

  8. Water Pollution Control (Indiana)

    Broader source: Energy.gov [DOE]

    The Indiana Department of Environmental Management and the Water Pollution Control Board are tasked with the prevention of pollution in the waters of the state. The Board may adopt rules and...

  9. Controlling Blow Flies

    E-Print Network [OSTI]

    Tomberlin, Jeffery K.

    2005-10-05T23:59:59.000Z

    Blow flies lay their eggs on animal remains and can spread disease. To control blow flies, it is important to remove dead animals and dispose of them properly, and to use effective insecticides when necessary....

  10. NUCLEAR PLANT AND CONTROL

    E-Print Network [OSTI]

    NUCLEAR PLANT OPERATIONS AND CONTROL KEYWORDS: software require- ments, safety analysis, formal, the missiles, and the digital protection systems embed- ded in nuclear power plants. Obviously, safety method SOFTWARE SAFETY ANALYSIS OF DIGITAL PROTECTION SYSTEM REQUIREMENTS USING A QUALITATIVE FORMAL

  11. Deterministic Minimax Impulse Control

    SciTech Connect (OSTI)

    El Farouq, Naima, E-mail: Elfarouq@i3s.unice.f [Universite Blaise Pascal (Clermont-Ferrand II), Laboratoire d'Informatique, de Modelisation et d'Optimisation des Systemes, UMR CNRS/UBP 6158 (France); Barles, Guy, E-mail: Barles@lmpt.univ-tours.f [Universite de Tours, Laboratoire de Mathematiques et Physique Theorique, Federation Denis Poisson (France); Bernhard, Pierre, E-mail: Pierre.Bernhard@sophia.inria.f [INRIA-Sophia Antipolis-Mediterranee (France)

    2010-06-15T23:59:59.000Z

    We prove the uniqueness of the viscosity solution of an Isaacs quasi-variational inequality arising in an impulse control minimax problem, motivated by an application in mathematical finance.

  12. Radiation: Radiation Control (Indiana)

    Broader source: Energy.gov [DOE]

    It is the policy of the state to encourage the constructive uses of radiation and to control its harmful effects. This section contains regulations pertaining to the manufacture, use,...

  13. Stepping Motor Control System

    E-Print Network [OSTI]

    Larson, Noble G.

    This paper describes a hardware system designed to facilitate position and velocity control of a group of eight stepping motors using a PDP-11. The system includes motor driver cards and other interface cards in addition ...

  14. Personalized HVAC control system

    E-Print Network [OSTI]

    Feldmeier, Mark Christopher

    We present a novel method of building comfort control, focused around the occupant. Custom sensing, communication, and actuation hardware were developed to locate users in a building, and measure various parameters directly ...

  15. Quantum error control codes

    E-Print Network [OSTI]

    Abdelhamid Awad Aly Ahmed, Sala

    2008-10-10T23:59:59.000Z

    QUANTUM ERROR CONTROL CODES A Dissertation by SALAH ABDELHAMID AWAD ALY AHMED Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of DOCTOR OF PHILOSOPHY May 2008 Major... Subject: Computer Science QUANTUM ERROR CONTROL CODES A Dissertation by SALAH ABDELHAMID AWAD ALY AHMED Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of DOCTOR OF PHILOSOPHY...

  16. Optically Controlled Jitter Generator

    E-Print Network [OSTI]

    Julia Manasson; V. A. Manasson

    2006-08-17T23:59:59.000Z

    A new simple circuit producing random pulse trains is proposed and experimentally studied. The circuit is composed of an operational amplifier and two feedback links, one of which comprises two photodiodes. The photodiodes are responsible for nonlinearity in the feedback. By varying the illumination it is possible to control the nonlinearity in the photodiode current-voltage characteristics and change the degree of randomness in the oscillations. The circuit's simplicity and optical control make it attractive for coupled map lattices.

  17. Nuclear reactor control

    SciTech Connect (OSTI)

    Ingham, R.V.

    1980-01-01T23:59:59.000Z

    A liquid metal cooled fast breeder nuclear reactor has power setback means for use in an emergency. On initiation of a trip-signal a control rod is injected into the core in two stages, firstly, by free fall to effect an immediate power-set back to a safe level and, secondly, by controlled insertion. Total shut-down of the reactor under all emergencies is avoided. 4 claims.

  18. Polymerization reactor control

    SciTech Connect (OSTI)

    Ray, W.H.

    1985-01-01T23:59:59.000Z

    The principal difficulties in achieving good control of polymerization reactors are related to inadequate on-line measurement, a lack of understanding of the dynamics of the process, the highly sensitive and nonlinear behavior of these reactors, and the lack of well-developed techniques for the control of nonlinear processes. Some illustrations of these problems and a discussion of potential techniques for overcoming some of these difficulties is provided.

  19. Valve for fluid control

    DOE Patents [OSTI]

    Oborny, Michael C. (Albuquerque, NM); Paul, Phillip H. (Livermore, CA); Hencken, Kenneth R. (Pleasanton, CA); Frye-Mason, Gregory C. (Cedar Crest, NM); Manginell, Ronald P. (Albuquerque, NM)

    2001-01-01T23:59:59.000Z

    A valve for controlling fluid flows. This valve, which includes both an actuation device and a valve body provides: the ability to incorporate both the actuation device and valve into a unitary structure that can be placed onto a microchip, the ability to generate higher actuation pressures and thus control higher fluid pressures than conventional microvalves, and a device that draws only microwatts of power. An electrokinetic pump that converts electric potential to hydraulic force is used to operate, or actuate, the valve.

  20. Environment induced incoherent controllability

    E-Print Network [OSTI]

    Raffaele Romano; Domenico D'Alessandro

    2005-11-08T23:59:59.000Z

    We prove that the environment induced entanglement between two non interacting, two-dimensional quantum systems S and P can be used to control the dynamics of S by means of the initial state of P. Using a simple, exactly solvable model, we show that both accessibility and controllability of S can be achieved under suitable conditions on the interaction of S and P with the environment.

  1. Motor Control STEVEN P. WISE

    E-Print Network [OSTI]

    Shadmehr, Reza

    Motor Control STEVEN P. WISE National Institute of Mental Health REZA SHADMEHR Johns Hopkins University I. What Controls Movement II. What the Motor System Controls III. Mechanisms of Motor Control IV. Motor Memory V. Flexibility in Motor Control VI. Evolution of the Motor System GLOSSARY agonist A muscle

  2. APS controls overview

    SciTech Connect (OSTI)

    NONE

    1996-02-01T23:59:59.000Z

    The APS accelerator control system described in this report is a distributed system consisting of operator interfaces, a network, and interfaces to hardware. The operator interface is a UNIX-based workstation with an X-windows graphical user interface. The workstation may be located at any point on the facility network and maintain full functionality. The user has the ability to generate and alter control displays and to access the alarm handler, the archiver, interactive control programs, custom code, and other tools. The TCP/EP networking protocol has been selected as the underlying protocol for the control system network. TCP/EP is a commercial standard and readily available from network hardware vendors. Its implementation is independent of the particular network medium selected to implement the controls network. In the development environment copper Ethernet is the network medium; however, in the actual implementation a fiber-based system using hub technology will be utilized. The function of the network is to provide a generalized communication path between the host computers, operator workstations, input/output crates, and other hardware that comprise the control system.

  3. EXPORT CONTROLS COMPLIANCE Policy Statement

    E-Print Network [OSTI]

    Shahriar, Selim

    Page 1 EXPORT CONTROLS COMPLIANCE Policy Statement Northwestern University ("Northwestern" or "University") must comply with all export control regulations issued by the federal government, which apply of the Northwestern community to comply with federal export control regulations, and the repercussions

  4. UK Export Controls 1) Export Control Act 2002 and Export Control Order 2008

    E-Print Network [OSTI]

    UK Export Controls 1) Export Control Act 2002 and Export Control Order 2008 UK export controls are designed to restrict the export and communication of sensitive technology or strategic goods, with the aim such as terrorism. The controls apply equally to the academic community as to any other exporter, and cover physical

  5. Supervisory Control Strategy Development

    SciTech Connect (OSTI)

    Gary D. Storrick; Bojan Petrovic

    2007-02-28T23:59:59.000Z

    Task 4 of this collaborative effort between ORNL, Brazil, and Westinghouse for the International Nuclear Energy Research Initiative entitled “Development of Advanced Instrumentation and Control for an Integrated Primary System Reactor” focused on the design of the hierarchical supervisory control for multiple-module units. The state of the IRIS plant design – specifically, the lack of a detailed secondary system design – made developing a detailed hierarchical control difficult at this time. However, other simultaneous and ongoing efforts have contributed to providing the needed information. This report summarizes the results achieved under Task 4 of this Financial Assistance Award. Section 1.2 describes the scope of this effort. Section 2 discusses the IRIS control functions. Next, it briefly reviews the current control concepts, and then reviews the maneuvering requirements for the IRIS plant. It closes by noting the benefits that automated sequences have in reducing operator workload. Section 3 examines reactor loading in the frequency domain to establish some guidelines for module operation, paying particular attention to strategies for using process steam for desalination and/or district heating. The final subsection discusses the implications for reactor control, and argues that using the envisioned percentage (up to 10%) of the NSSS thermal output for these purposes should not significantly affect the NSSS control strategies. Section 4 uses some very general economic assumptions to suggest how one should approach multi-module operation. It concludes that the well-known algorithms used for economic dispatching could be used to help manage a multi-unit IRIS site. Section 5 addresses the human performance factors of multi-module operation. Section 6 summarizes our conclusions.

  6. Nuclear reactor control column

    SciTech Connect (OSTI)

    Bachovchin, D.M.

    1982-08-10T23:59:59.000Z

    The nuclear reactor control column comprises a column disposed within the nuclear reactor core having a variable cross-section hollow channel and containing balls whose vertical location is determined by the flow of the reactor coolant through the column. The control column is divided into three basic sections wherein each of the sections has a different cross-sectional area. The uppermost section of the control column has the greatest crosssectional area, the intermediate section of the control column has the smallest cross-sectional area, and the lowermost section of the control column has the intermediate cross-sectional area. In this manner, the area of the uppermost section can be established such that when the reactor coolant is flowing under normal conditions therethrough, the absorber balls will be lifted and suspended in a fluidized bed manner in the upper section. However, when the reactor coolant flow falls below a predetermined value, the absorber balls will fall through the intermediate section and into the lowermost section, thereby reducing the reactivity of the reactor core and shutting down the reactor.

  7. Nuclear reactor control column

    DOE Patents [OSTI]

    Bachovchin, Dennis M. (Plum Borough, PA)

    1982-01-01T23:59:59.000Z

    The nuclear reactor control column comprises a column disposed within the nuclear reactor core having a variable cross-section hollow channel and containing balls whose vertical location is determined by the flow of the reactor coolant through the column. The control column is divided into three basic sections wherein each of the sections has a different cross-sectional area. The uppermost section of the control column has the greatest cross-sectional area, the intermediate section of the control column has the smallest cross-sectional area, and the lowermost section of the control column has the intermediate cross-sectional area. In this manner, the area of the uppermost section can be established such that when the reactor coolant is flowing under normal conditions therethrough, the absorber balls will be lifted and suspended in a fluidized bed manner in the upper section. However, when the reactor coolant flow falls below a predetermined value, the absorber balls will fall through the intermediate section and into the lowermost section, thereby reducing the reactivity of the reactor core and shutting down the reactor.

  8. Control rod cluster arrangement

    SciTech Connect (OSTI)

    Orr, W.L.; Doshi, P.K.; Mildrum, C.M.; Freeman, T.R.

    1987-02-10T23:59:59.000Z

    This patent describes a nuclear reactor including nuclear core which is cooled and moderated by light water, the nuclear core comprising a plurality of parallel arranged openings therethrough and interspersed among the fuel assemblies. A control rod cluster arrangement comprises load follow control rod cluster assemblies with each load follow control rod cluster assembly being adapted to slidingly fit within each of some of the fuel assemblies in the parallel arranged openings, the load follow control rod cluster assemblies each comprising a plurality of elongated parallel arranged rods attached to a single spider, and including a first group of rods and a second group of rods, the first group of rods and the second each consisting of a plurality of absorber rods. The first group of rods consist of absorber rods taken from the group consisting of B/sub 4/C, hafnium, or silver-indium-cadmium and the second group of rods consist of absorber rods each consisting of stainless steel, the first group of rods and the second group of rods each being integrally attached at all times to the single spider, the absorber rods of the second group of rods being dispersed throughout the control rod cluster assembly. The first group of rods have a first neutron capture cross section and the second group of rods have a second neutron capture cross section different from the first cross section.

  9. Superconducting VAR control. [Patent application

    DOE Patents [OSTI]

    Boenig, H.J.; Hassenzahl, W.V.

    1980-12-05T23:59:59.000Z

    Static VAR control means are described employing an asymmetrically controlled Graetz bridge and a superconducting direct current coil having low losses and low cost characteristics.

  10. Water Quality Control Act (Tennessee)

    Broader source: Energy.gov [DOE]

    The Water Quality Control Act (WQCA) establishes the water pollution control program. The WQCA identifies the responsibilities and extent of authority for the Commissioner of the Water Quality...

  11. Information in coordinated system control

    E-Print Network [OSTI]

    Kang, Keunmo

    2008-01-01T23:59:59.000Z

    nonlinear systems’, IEEE Transaction of Automatic Controllinear systems’, IEEE Transactions on Automatic Control 23,nonlinear systems’, IEEE Transactions on Automatic Control

  12. Directing the Fall of Darwin’s “Grain in the Balance”: Manipulation of Hydraulic Flushing as a Potential Control of Phytoplankton Dynamics

    E-Print Network [OSTI]

    Roelke, Daniel; Augustine, Sarah; Buyukates, Yesim

    lakes of the Yellowstone ecosystem using resource theory. Limnology and Oceanography 41:1052-1062. Kirk, J. T. O. 1994. Light and Photosynthesis in Aquatic Ecosystems. Cambridge University Press, Cambridge. Koch, A. L. 1974. Competitive coexistence of 2... Sciences Department, Texas A&M University December 2003 This research was supported in part by The National Science Foundation Research for Undergraduates Program The Texas A&M Sea Grant College Program and the Texas Water Resources Institute 2 Directing...

  13. Device control at CEBAF

    SciTech Connect (OSTI)

    Schaffner, S.; Barker, D.; Bookwalter, V. [and others

    1996-08-01T23:59:59.000Z

    CEBAF has undergone a major conversion of its accelerator control system from TACL to EPICS, affecting device control for the RF system, magnets, the machine protection system, the vacuum and valves, and the diagnostic systems including beam position monitors, harps, and the camera and solenoid devices (beam viewers, faraday cups, optical transition radiation viewers, synchrotron radiation monitor, etc.). Altogether these devices require approximately 125,000 EPICS database records. The majority of these devices are controlled through CAMAC; some use embedded microprocessors (RF and magnets), and newer interfaces are in VME. The standard EPICS toolkit was extended to include a driver for CAMAC which supports dual processors on one serial highway, custom database records for magnets and BPMs, and custom data acquisition tasks for the BPMs. 2 refs., 1 tab.

  14. Power Systems Control Architecture

    SciTech Connect (OSTI)

    James Davidson

    2005-01-01T23:59:59.000Z

    A diagram provided in the report depicts the complexity of the power systems control architecture used by the national power structure. It shows the structural hierarchy and the relationship of the each system to those other systems interconnected to it. Each of these levels provides a different focus for vulnerability testing and has its own weaknesses. In evaluating each level, of prime concern is what vulnerabilities exist that provide a path into the system, either to cause the system to malfunction or to take control of a field device. An additional vulnerability to consider is can the system be compromised in such a manner that the attacker can obtain critical information about the system and the portion of the national power structure that it controls.

  15. Dynamic PID loop control

    E-Print Network [OSTI]

    Pei, L; Theilacker, J; Soyars, W; Martinez, A; Bossert, R; DeGraff, B; Darve, C

    2012-01-01T23:59:59.000Z

    The Horizontal Test Stand (HTS) SRF Cavity and Cryomodule 1 (CM1) of eight 9-cell, 1.3GHz SRF cavities are operating at Fermilab. For the cryogenic control system, how to hold liquid level constant in the cryostat by regulation of its Joule-Thompson JT-valve is very important after cryostat cool down to 2.0 K. The 72-cell cryostat liquid level response generally takes a long time delay after regulating its JT-valve; therefore, typical PID control loop should result in some cryostat parameter oscillations. This paper presents a type of PID parameter self-optimal and Time-Delay control method used to reduce cryogenic system parameters' oscillation.

  16. Dynamic PID loop control

    SciTech Connect (OSTI)

    Pei, L.; Klebaner, A.; Theilacker, J.; Soyars, W.; Martinez, A.; Bossert, R.; DeGraff, B.; Darve, C.; /Fermilab

    2011-06-01T23:59:59.000Z

    The Horizontal Test Stand (HTS) SRF Cavity and Cryomodule 1 (CM1) of eight 9-cell, 1.3GHz SRF cavities are operating at Fermilab. For the cryogenic control system, how to hold liquid level constant in the cryostat by regulation of its Joule-Thompson JT-valve is very important after cryostat cool down to 2.0 K. The 72-cell cryostat liquid level response generally takes a long time delay after regulating its JT-valve; therefore, typical PID control loop should result in some cryostat parameter oscillations. This paper presents a type of PID parameter self-optimal and Time-Delay control method used to reduce cryogenic system parameters oscillation.

  17. Electric turbocompound control system

    DOE Patents [OSTI]

    Algrain, Marcelo C. (Dunlap, IL)

    2007-02-13T23:59:59.000Z

    Turbocompound systems can be used to affect engine operation using the energy in exhaust gas that is driving the available turbocharger. A first electrical device acts as a generator in response to turbocharger rotation. A second electrical device acts as a motor to put mechanical power into the engine, typically at the crankshaft. Apparatus, systems, steps, and methods are described to control the generator and motor operations to control the amount of power being recovered. This can control engine operation closer to desirable parameters for given engine-related operating conditions compared to actual. The electrical devices can also operate in "reverse," going between motor and generator functions. This permits the electrical device associated with the crankshaft to drive the electrical device associated with the turbocharger as a motor, overcoming deficient engine operating conditions such as associated with turbocharger lag.

  18. Mercury control in 2009

    SciTech Connect (OSTI)

    Sjostrom, S.; Durham, M.; Bustard, J.; Martin, C. [ADA Environmental Solutions, Littleton, CO (United States)

    2009-07-15T23:59:59.000Z

    Although activated carbon injection (ACI) has been proven to be effective for many configurations and is a preferred option at many plants sufficient quantities of powdered activated coking (PAC) must be available to meet future needs. The authors estimate that upcoming federal and state regulations will result in tripling the annual US demand for activated carbon to nearly 1.5 billion lb from approximately 450 million lb. Rapid expansion of US production capacity is required. Many PAC manufacturers are discussing expansion of their existing production capabilities. One company, ADA Carbon Solutions, is in the process of constructing the largest activated carbon facility in North America to meet the future demand for PAC as a sorbent for mercury control. Emission control technology development and commercialization is driven by regulation and legislation. Although ACI will not achieve > 90% mercury control at every plant, the expected required MACT legislation level, it offers promise as a low-cost primary mercury control technology option for many configurations and an important trim technology for others. ACI has emerged as the clear mercury-specific control option of choice, representing over 98% of the commercial mercury control system orders to date. As state regulations are implemented and the potential for a federal rule becomes more imminent, suppliers are continuing to develop technologies to improve the cost effectiveness and limit the balance of plant impacts associated with ACI and are developing additional PAC production capabilities to ensure that the industry's needs are met. The commercialisation of ACI is a clear example of industry, through the dedication of many individuals and companies with support from the DOE and EPRI, meeting the challenge of developing cost-effectively reducing emissions from coal-fired power plants. 7 refs., 1 fig.

  19. PIECEWISE AFFINE SYSTEMS CONTROLLABILITY AND HYBRID OPTIMAL CONTROL

    E-Print Network [OSTI]

    Rondepierre, Aude

    PIECEWISE AFFINE SYSTEMS CONTROLLABILITY AND HYBRID OPTIMAL CONTROL Aude Rondepierre Laboratoire de.Rondepierre@imag.fr Keywords: Piecewise affine hybrid systems, polyhedral sets, controllability, optimal control synthesis difficulty is actually the synthesis of optimal feedback, even not solved for linear systems, except in some

  20. Decentralized Control Framework for Networked Control Systems Ahmed Elmahdi

    E-Print Network [OSTI]

    Sun, Dengfeng

    understand and interact with large-scale decentralized modern control systems. To mention a few, large- opment of distributed control systems. These modern systems which include sensors and actuatorsDecentralized Control Framework for Networked Control Systems Ahmed Elmahdi , Ahmad F Taha

  1. A Control Approach to Bandwidth Management in Networked Control Systems

    E-Print Network [OSTI]

    Brandt, Scott A.

    A Control Approach to Bandwidth Management in Networked Control Systems Manel Velasco, Josep M management in networked control systems that allows control loops to consume band- width according bandwidth. I. INTRODUCTION Modern embedded systems are expected to provide more functionality and better

  2. Indirect control and power in mutual control Dominik Karos

    E-Print Network [OSTI]

    Guo, Zaoyang

    Indirect control and power in mutual control structures Dominik Karos Hans Peters This version of the paper, we axiomatically develop a class of power indices for invariant mutual control structures. We accumulates his Shapley-Shubik power index assignments from controlling other players, diminished by the sum

  3. Optimizing Controller Location in Networked Control Systems with Packet Drops

    E-Print Network [OSTI]

    Optimizing Controller Location in Networked Control Systems with Packet Drops C. L. Robinson1 and P in answering these two questions is that analysis of optimality in networked control systems subject to random mechanisms for wireless networked control systems [8, 6, 5]. In this paper we consider the issue of optimal

  4. OPTIMAL CONTROL WITH PACKET DROPS IN NETWORKED CONTROL SYSTEMS

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    OPTIMAL CONTROL WITH PACKET DROPS IN NETWORKED CONTROL SYSTEMS Flavia Felicioni*, François Simonot optimization 1. INTRODUCTION1 With the progress of networking technology, more and more control systems are now: The stability and performance of a networked control system are strongly influenced by the network delay

  5. Guided Controller Synthesis for Climate Controller Using Uppaal Tiga

    E-Print Network [OSTI]

    David, Alexandre

    is explored using an industrial case study for climate control in a pig stable. The problem is modeled parts in a traditional control design cycle are modelling, simulations and synthesis. Modelling often to be applicable for control, while simulation can implement both original and linearized models. For control

  6. Torras: Robot Arm Control 1 Robot Arm Control

    E-Print Network [OSTI]

    Torras, Carme

    Torras: Robot Arm Control 1 Robot Arm Control Carme Torras Institut de Rob#18;otica i Inform#18;atica Industrial (CSIC-UPC) Llorens i Artigas 4-6, 08028-Barcelona. RUNNING HEAD: Robot Arm Control: 34-93-401.57.50 e-mail: ctorras@iri.upc.es #12; Torras: Robot Arm Control 2 INTRODUCTION A robot

  7. PROCESS DESIGN AND CONTROL Optimal Selection of Controlled Variables

    E-Print Network [OSTI]

    Skogestad, Sigurd

    a centralized online optimizing controller with a continu- ous update of its model parameters. However to "self-regulating control", which is when an acceptable dynamic performance can be achieved with no control (i.e., with constant manipulated variables). Correspond- ingly, "self-optimizing control" is when

  8. Knowledge-based control 

    E-Print Network [OSTI]

    Painter, John H.

    1992-03-17T23:59:59.000Z

    parts; comprising the eyetern (plant) under control, an inferential estima- tor, and a memoryless controller. 138 . - - Authorized licensed use limited to: Texas A M University. Downloaded on February 18,2010 at 14:24:05 EST from IEEE Xplore... modes are tems exhibiting a finite (or at least countable) num- ber of states, a theoretical basis parallel to that ex- 139 Authorized licensed use limited to: Texas A M University. Downloaded on February 18,2010 at 14:24:05 EST from IEEE Xplore...

  9. The Epicure Control System

    SciTech Connect (OSTI)

    Dambik, E.; Kline, D.; West, R.

    1993-09-01T23:59:59.000Z

    The Epicure Control System supports the Fermilab fixed target physics program. The system is distributed across a network of many different types of components. The use of multiple layers on interfaces for communication between logical tasks fits the client-server model. Physical devices are read and controlled using symbolic references entered into a database with an editor utility. The database system consists of a central portion containing all device information and optimized portions distributed among many nodes. Updates to the database are available throughout the system within minutes after being requested.

  10. Controlling Graphene's Electronic Structure

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power Administration would likeConstitution And BylawsMetal-OrganicControllingControlling

  11. Internal Control Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2008-10-28T23:59:59.000Z

    To ensure sound internal controls and overall consistency in exercising the statutory authorities that vest in the Secretary, the Administrator, National Nuclear Security Administration (NNSA), and Department's Chief Financial Officer (CFO), and to implement the Federal Managers' Financial Integrity Act of 1982 and related central agency guidance. Cancels DOE O 413.1A.

  12. Thermophotovoltaic Spectral Control

    SciTech Connect (OSTI)

    DM DePoy; PM Fourspring; PF Baldasaro; JF Beausang; EJ Brown; MW Dashiel; KD Rahner; TD Rahmlow; JE Lazo-Wasem; EJ Gratrix; B Wemsman

    2004-06-09T23:59:59.000Z

    Spectral control is a key technology for thermophotovoltaic (TPV) direct energy conversion systems because only a fraction (typically less than 25%) of the incident thermal radiation has energy exceeding the diode bandgap energy, E{sub g}, and can thus be converted to electricity. The goal for TPV spectral control in most applications is twofold: (1) Maximize TPV efficiency by minimizing transfer of low energy, below bandgap photons from the radiator to the TPV diode. (2) Maximize TPV surface power density by maximizing transfer of high energy, above bandgap photons from the radiator to the TPV diode. TPV spectral control options include: front surface filters (e.g. interference filters, plasma filters, interference/plasma tandem filters, and frequency selective surfaces), back surface reflectors, and wavelength selective radiators. System analysis shows that spectral performance dominates diode performance in any practical TPV system, and that low bandgap diodes enable both higher efficiency and power density when spectral control limitations are considered. Lockheed Martin has focused its efforts on front surface tandem filters which have achieved spectral efficiencies of {approx}83% for E{sub g} = 0.52 eV and {approx}76% for E{sub g} = 0.60 eV for a 950 C radiator temperature.

  13. Microelectromechanical flow control apparatus

    DOE Patents [OSTI]

    Okandan, Murat (NE Albuquerque, NM)

    2009-06-02T23:59:59.000Z

    A microelectromechanical (MEM) flow control apparatus is disclosed which includes a fluid channel formed on a substrate from a first layer of a nonconducting material (e.g. silicon nitride). A first electrode is provided on the first layer of the nonconducting material outside the flow channel; and a second electrode is located on a second layer of the nonconducting material above the first layer. A voltage applied between the first and second electrodes deforms the fluid channel to increase its cross-sectional size and thereby increase a flow of a fluid through the channel. In certain embodiments of the present invention, the fluid flow can be decreased or stopped by applying a voltage between the first electrode and the substrate. A peristaltic pumping of the fluid through the channel is also possible when the voltage is applied in turn between a plurality of first electrodes and the substrate. A MEM flow control assembly can also be formed by providing one or more MEM flow control devices on a common substrate together with a submicron filter. The MEM flow control assembly can optionally include a plurality of pressure sensors for monitoring fluid pressure and determining flow rates through the assembly.

  14. Bioreactors Modeling and Control

    E-Print Network [OSTI]

    Grossmann, Ignacio E.

    Bioreactors Modeling and Control: Dealing with Complexity Dep. Of Chemical Engineering ­ Federal ­ Federal University of São Carlos ­ Brazil 1 DEQDEQ #12;First things first: What is a bio-reactor, anyway - Bioreactors: · Enzymatic reactors · Cultivation of microorganisms/cells ("fermenters") ThyssenKrupp Stainless

  15. Server Control Module Fulfillsserversignalingfunctionality

    E-Print Network [OSTI]

    Shenoy, Prashant

    CCM CCM CCM SCM SCM GM SGM SGM SGM SGM SGM SGM SGM SGMSGM SGM SGM SGMSGM Input Streams Output Streams Client Requests SCM SCM CCM Stream Requests Server Control Module streamservices GMaltersData Planetoperform requested service GMsends requestfor stream toCCM AMPS Design, Build

  16. Adaptive sequential controller

    DOE Patents [OSTI]

    El-Sharkawi, Mohamed A. (Renton, WA); Xing, Jian (Seattle, WA); Butler, Nicholas G. (Newberg, OR); Rodriguez, Alonso (Pasadena, CA)

    1994-01-01T23:59:59.000Z

    An adaptive sequential controller (50/50') for controlling a circuit breaker (52) or other switching device to substantially eliminate transients on a distribution line caused by closing and opening the circuit breaker. The device adaptively compensates for changes in the response time of the circuit breaker due to aging and environmental effects. A potential transformer (70) provides a reference signal corresponding to the zero crossing of the voltage waveform, and a phase shift comparator circuit (96) compares the reference signal to the time at which any transient was produced when the circuit breaker closed, producing a signal indicative of the adaptive adjustment that should be made. Similarly, in controlling the opening of the circuit breaker, a current transformer (88) provides a reference signal that is compared against the time at which any transient is detected when the circuit breaker last opened. An adaptive adjustment circuit (102) produces a compensation time that is appropriately modified to account for changes in the circuit breaker response, including the effect of ambient conditions and aging. When next opened or closed, the circuit breaker is activated at an appropriately compensated time, so that it closes when the voltage crosses zero and opens when the current crosses zero, minimizing any transients on the distribution line. Phase angle can be used to control the opening of the circuit breaker relative to the reference signal provided by the potential transformer.

  17. Tick Control (Spanish)

    E-Print Network [OSTI]

    Merchant, Michael E.

    2002-08-23T23:59:59.000Z

    E-150S 5-02 Mike Merchant Extension Entomologist Texas Cooperative Extension The Texas A&M University System El Control de Garrapatas L as garrapatas son una plaga mordedora de forma aplanada que tiene ocho patas y a menudo se encuentra en las...

  18. Systems and Control Engineering

    E-Print Network [OSTI]

    Rollins, Andrew M.

    ), the automobile companies Ford, GM) computer companies (IBM, Lucent, Bellcore) by the aerospace industry (GE, JPL areas require cross-disciplinary tools and methods for their solution. The Bachelor of Science program include the modeling, analysis, optimization and control of complex biological, energy, and industrial

  19. Thermoelectric Temperature Control

    E-Print Network [OSTI]

    Saffman, Mark

    NOTE 201TM TECHNICAL Optimizing Thermoelectric Temperature Control Systems #12;2 May 1995 92-040000A © 1995 Wavelength Electronics, Inc. Thermoelectric coolers (TECs) are used in a variety understanding of thermal management techniques and carefully select the thermoelectric module, temperature

  20. Controlling Rats and Mice

    E-Print Network [OSTI]

    Texas Wildlife Services

    2007-03-13T23:59:59.000Z

    at least 18 inches off the ground. 18? 18? TCE?Wildlife Services P.O. Box 100410 ? San Antonio, Texas 78201-1710 Rat-proofing Whenever it can be accomplished at a rea- sonable cost, rat-proofing is recommended as the most permanent means of control...

  1. Diesel Combustion Control with Closed-Loop Control of the Injection...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Combustion Control with Closed-Loop Control of the Injection Strategy Diesel Combustion Control with Closed-Loop Control of the Injection Strategy New control strategies are...

  2. CONTROL AND OPTIMIZATION SPRING 2012

    E-Print Network [OSTI]

    on control of dynamical systems, linear and nonlinear least squares optimization, model-based estimation, and optimal control. We mostly restrict our study to linear, time-invariant control systems. Introductory optimiza- tion, optimal control, Kalman filters, Bayesian estimation. Prerequisites. Linear algebra

  3. Gas Slow Control System Specifications

    E-Print Network [OSTI]

    Roma "La Sapienza", Università di

    AMS-02 TRD Gas Slow Control System Specifications v 4.2 26-06-2006 A. Bartoloni, B. Borgia, F. Bucci, F. R. Spada INFN Sezione di Roma 1- Roma, Italy #12;2/45 #12;3/45 1. ABSTRACT 5 2. GAS SYSTEM FUNCTIONAL DESCRIPTION 5 3. GAS CONTROL SYSTEM 8 4. CONTROL SYSTEM COMPONENTS 12 a. Universal Control System

  4. Optimal Control PRENTICE HALL INFORMATION

    E-Print Network [OSTI]

    Moore, John Barratt

    Optimal Control Optimal Filtering Computer-ControlledSystems: Theory and Design, 21e Statistical & Systems System Identification and Control Design Using P.I.M. + Software System Identification Medical Control 1 1.2 About This Book in Particular 4 1.3 Part and Chapter Outline 5 0 The Standard Regulator

  5. On Cyber Security for Networked Control Systems

    E-Print Network [OSTI]

    Amin, Saurabh

    2011-01-01T23:59:59.000Z

    optimal control and stabilization for linear systems with bounded controloptimal switching control for abstract linear systems onoptimal control for discrete-time, linear dynamical systems in which control

  6. Northwestern University Archives Evanston, Illinois Theodore Wesley Koch (1871-1941) Papers, 1894-1980

    E-Print Network [OSTI]

    at the University of Paris. He returned to the United States in 1902 as an assistant in the Catalog Division") was Northwestern University's librarian from 1919 until his death in 1941. During that time he presided over complained about low wages for the staff and the resulting high turnover rate, the insufficient size

  7. Allozyme Variation in Turkmenian Populations of Wild Barley, Hordeum spontaneum Koch.

    E-Print Network [OSTI]

    Volis, Sergei

    The Institute of Plant Physiology, Genetics and Bioengineering, Almaty, 480090, Kazakhstan, }The Main Botanical Garden of Kazakhstan, Almaty, 480062, Kazakhstan, **The Institute of Plant Physiology, Genetics and Bioengineering, Almaty, 480090, Kazakhstan and ***The Institute for Desert Research, The Turkmenian Academy

  8. Absorption and translocation of zinc in pecan trees [Carya illinoensis (Wang.) K. Koch

    E-Print Network [OSTI]

    Wadsworth, Grady Lynn

    1970-01-01T23:59:59.000Z

    for the treated pecan gaves receiving a 10 ~1 droplet of &Zn in ZnS04 solution which con- tained 73. 0 ~g Zn and had an activ- ity of 3. 4 pxc 6oZn after removal of treatment spot. Table Page 15 16 Mean values for the tissues above the treated pecan leaf... contained 73. 0 pg Zn and had an activity of 3. 4 r c 65zn. 56 57 17 Individual root values and t, reatment mean values for pecan seedlings placed in one-half strength Hoagland's solution whi. ch contained 156. 4 pzg of Zr. with an activity of 7. 8 ~c...

  9. Male-female interaction among different geographic strains of the Gulf Coast tick Amblyomma maculatum Koch

    E-Print Network [OSTI]

    Sleeba, Sarah Beth

    2006-08-16T23:59:59.000Z

    dish experiments were used to understand male-female interaction in the field, and to determine if the aggregation attachment pheromone (AAP) produced by fed males of varying strains is attractive to geographic specific strains of unfed female ticks...

  10. 0.6-M ANTENNAE FOR THE AMIBA INTERFEROMETER ARRAY Patrick Koch(1)

    E-Print Network [OSTI]

    Koch, Patrick

    for the 0.6m Cassegrain antennae. The primary and secondary mirrors are carbon fiber sandwich structures-30 and 10 m, respectively. Simulated load conditions for the mirrors show maximum rms surface errors of less topics carried out at ASIAA range from solar system to cosmology, with the staff making use of many

  11. Evidence for Temperature-Dependent Electron Band Dispersion in Pentacene N. Koch,1,* A. Vollmer,2

    E-Print Network [OSTI]

    Peters, Achim

    . Experimental.--PES experiments were performed at the end-station SurICat (beamline PM4) at the synchrotron light source BESSY GmbH (Berlin). The ultrahigh vacuum (UHV) system comprises interconnected sample

  12. Koch Institute Corners of Main/Vassar Streets and Main/Ames Streets

    E-Print Network [OSTI]

    Leiserson, Charles E.

    Brownfield redevelopment Storm water filtration system Reflective roof material which will reduce the heat island effect Heat recovery methods incorporated into HVAC systems VAV system and right sizing of HVAC energy A construction waste management plan that recycles and salvages waste Project Managers

  13. Observations concerning the life cycle and biology of Myobia musculi (Schrank) and Myocoptes musculinus (Koch)

    E-Print Network [OSTI]

    Letscher, Robert Malcolm

    1970-01-01T23:59:59.000Z

    by their iong posterior setae. Some of the mites will leave the bodiy of the host anti. rely and move about on the surface supporting the dead host. The vast majority of: the forms seen off the host were adults, primarily females. They move about quite read... to that observed with ~If obis. Some stages were also seen suspended in the ai. r with only their posterior setae in contact with the hai. r shaft. Wh'le at the tips of the hairs, the mites' first 2 pairs of. leg. , wave almost continuously in attempts to clasp...

  14. An Investigation of the Koch Snowflake Fractal Billiard: Experimental and Theoretical Results.

    E-Print Network [OSTI]

    Niemeyer, Robert Garrett

    2012-01-01T23:59:59.000Z

    dynamics and ergodic theory Definitions and terminology ind?. Basic group theory Definition 24 (Equivalence relation).nature. Definitions and terminology in ergodic theory The

  15. On Tool Integration in High-Performance FPGA Design Andreas Koch

    E-Print Network [OSTI]

    resources, However, the very flexibility of current generator systems complicates their inte- gration and efficient use of flexible generation techniques in automatic com- pilation flows targeting configurable targets include module generation as a crucial step [5­7]. However, the very flexibility of parametrized

  16. Core Analysis At Jemez Mountain Area (Eichelberger & Koch, 1979) | Open

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty EditCalifornia:PowerCER.pngRoofs and Heat Islands Jump| Open EnergyOpen EnergyEnergy

  17. Rock Sampling At Jemez Mountain Area (Eichelberger & Koch, 1979) | Open

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro Industries Pvt Ltd Jump to: navigation,MazeOhio:Ohio: Energy ResourcesRock Lab ActivityEnergy

  18. PID control of gas pipelines

    SciTech Connect (OSTI)

    Coltharp, B.; Bergmann, J. [Baker CAC, Kingwood, TX (United States)

    1996-09-01T23:59:59.000Z

    The use of low cost digital controllers for pipeline control is increasing as the reliability and cost improves. In pipeline applications, the proportional, integral, and derivative (PID) controller algorithm is often used. However, the unique problems associated with pipeline operation have caused manufacturers to modify the basic control algorithms. Features such as set point ramping, built in pressure control, freeze on input error, and high and low output limits help assure safe and predictable pipeline operation.

  19. Control power in perfect controlled teleportation via partially entangled channels

    E-Print Network [OSTI]

    Xi-Han Li; Shohini Ghose

    2014-10-05T23:59:59.000Z

    We analyze and evaluate perfect controlled teleportation via three-qubit entangled channels from the point of view of the controller. The key idea in controlled teleportation is that the teleportation is performed only with the participation of the controller. We calculate a quantitative measure of the controller's power and establish a lower bound on the control power required for controlled teleportation. We show that the maximally entangled GHZ state is a suitable channel for controlled teleportation of arbitrary single qubits - the controller's power meets the bound and the teleportation fidelity without the controller's permission is no better than the fidelity of a classical channel. We also construct partially entangled channels that exceed the bound for controlled teleportation of a restricted set of states called the equatorial states. We calculate the minimum entanglement required in these channels to exceed the bound. Moreover, we find that in these restricted controlled teleportation schemes, the partially entangled channels can outperform maximally entangled channels with respect to the controller's power. Our results provide a new perspective on controlled teleportation schemes and are of practical interest since we propose useful partially entangled channels.

  20. Ripple burn control

    SciTech Connect (OSTI)

    Bhadra, D.K.; Petrie, T.W.; Peuron, U.A.; Rawls, J.M.

    1980-05-01T23:59:59.000Z

    The ripple contribution to the ion thermal conductivity is ideally suited in magnitude, temperature dependence, and spatial dependence to serve as a burn control mechanism. Furthermore, a considerable measure of automatic burn control results because of the radial shift of the plasma to a region of higher ripple. Unfortunately, the window in ripple values consistent with both ignition and a burn equilibrium is uncomfortably narrow, given the current lack of contact between the theoretical models of ripple transport and experimental observations. A survey is made of the techniques to vary the ripple and thus broaden the design window. One new technique is discussed in some detail: the use of ferromagnetic materials in the shield with magnetic properties which are sensitive functions of the operating temperature.

  1. Photovoltaic system controller

    SciTech Connect (OSTI)

    Gerken, K.F.; Sullivan, R.A.

    1989-12-19T23:59:59.000Z

    This patent describes a photovoltaic system controller for utilization with a photovoltaic power system including at least a photovoltaic array, a system battery adapted to be charged by the array and a load adapted to be powered by the battery. The controller comprising a microprocessor having an erasable programmable memory. The microprocessor having means to receive input data from the array, the battery and the load. The microprocessor having means to evaluate the input data in relation to at least one predetermined setpoint, the microprocessor in response to the evaluation being adapted to disconnect the battery from the array or to disconnect the load from the battery. The setpoint being adapted to be adjusted to a second setpoint by adjustment means, and the erasable programmable memory being adapted to be changed whereby the evaluation performed by the microprocessor is also changed.

  2. Hybrid powertrain controller

    DOE Patents [OSTI]

    Jankovic, Miroslava (Birmingham, MI); Powell, Barry Kay (Belleville, MI)

    2000-12-26T23:59:59.000Z

    A hybrid powertrain for a vehicle comprising a diesel engine and an electric motor in a parallel arrangement with a multiple ratio transmission located on the torque output side of the diesel engine, final drive gearing connecting drivably the output shaft of transmission to traction wheels of the vehicle, and an electric motor drivably coupled to the final drive gearing. A powertrain controller schedules fuel delivered to the diesel engine and effects a split of the total power available, a portion of the power being delivered by the diesel and the balance of the power being delivered by the motor. A shifting schedule for the multiple ratio transmission makes it possible for establishing a proportional relationship between accelerator pedal movement and torque desired at the wheels. The control strategy for the powertrain maintains drivability of the vehicle that resembles drivability of a conventional spark ignition vehicle engine powertrain while achieving improved fuel efficiency and low exhaust gas emissions.

  3. Engine Cylinder Temperature Control

    DOE Patents [OSTI]

    Kilkenny, Jonathan Patrick (Peoria, IL); Duffy, Kevin Patrick (Metamora, IL)

    2005-09-27T23:59:59.000Z

    A method and apparatus for controlling a temperature in a combustion cylinder in an internal combustion engine. The cylinder is fluidly connected to an intake manifold and an exhaust manifold. The method and apparatus includes increasing a back pressure associated with the exhaust manifold to a level sufficient to maintain a desired quantity of residual exhaust gas in the cylinder, and varying operation of an intake valve located between the intake manifold and the cylinder to an open duration sufficient to maintain a desired quantity of fresh air from the intake manifold to the cylinder, wherein controlling the quantities of residual exhaust gas and fresh air are performed to maintain the temperature in the cylinder at a desired level.

  4. FMIT facility control system

    SciTech Connect (OSTI)

    Suyama, R.M.; Machen, D.R.; Johnson, J.A.

    1981-01-01T23:59:59.000Z

    The control system for the Fusion Materials Irradiation Test (FMIT) Facility, under construction at Richland, Washington, uses current techniques in distributed processing to achieve responsiveness, maintainability and reliability. Developmental experience with the system on the FMIT Prototype Accelerator (FPA) being designed at the Los Alamos National Laboratory is described as a function of the system's design goals and details. The functional requirements of the FMIT control system dictated the use of a highly operator-responsive, display-oriented structure, using state-of-the-art console devices for man-machine communications. Further, current technology has allowed the movement of device-dependent tasks into the area traditionally occupied by remote input-output equipment; the system's dual central process computers communicate with remote communications nodes containing microcomputers that are architecturally similar to the top-level machines. The system has been designed to take advantage of commercially available hardware and software.

  5. Controlling electric power demand

    SciTech Connect (OSTI)

    Eikenberry, J.

    1984-11-15T23:59:59.000Z

    Traditionally, demand control has not been viewed as an energy conservation measure, its intent being to reduce the demand peak to lower the electric bill demand charge by deferring the use of a block of power to another demand interval. Any energy savings were essentially incidental and unintentional, resulting from curtailment of loads that could not be assumed at another time. This article considers a microprocessor-based multiplexed system linked to a minicomputer to control electric power demand in a winery. In addition to delivering an annual return on investment of 55 percent in electric bill savings, the system provides a bonus in the form of alarm and monitoring capability for critical processes.

  6. Controlled CO preferential oxidation

    DOE Patents [OSTI]

    Meltser, M.A.; Hoch, M.M.

    1997-06-10T23:59:59.000Z

    Method is described for controlling the supply of air to a PROX (PReferential OXidation for CO cleanup) reactor for the preferential oxidation in the presence of hydrogen wherein the concentration of the hydrogen entering and exiting the PROX reactor is monitored, the difference there between correlated to the amount of air needed to minimize such difference, and based thereon the air supply to the PROX reactor adjusted to provide such amount and minimize such difference. 2 figs.

  7. Snakes and Their Control

    E-Print Network [OSTI]

    Texas Wildlife Services

    2008-04-15T23:59:59.000Z

    - tivewaysofdiscouragingthem.Eliminatingrock piles, brush piles, tall grass, etc., will cause snakes to seek a more suitable habitat. Lumber, wood piles and other debris around the home should be stored at least 18 inches off the ground. Controlling insect and rodent popula... must be sealed. Since snakes normally enter a building at or below ground level, all openings around water pipes, electrical outlets, doors and windows should be closed. Holes in masonry foundations around the home should be sealed with mortar. Hardware...

  8. Worldwide report, arms control

    SciTech Connect (OSTI)

    NONE

    1987-03-18T23:59:59.000Z

    This report contains translations/transcriptions of articles and/or broadcasts on Arms Control. Titles include: USSR Journal Review of French Book on SDI; Moscow Talk Show Considers Possibility of Dealing with U.S.; Thatcher, Gorbachev Talks Anticipated; U.S. Presents Draft Treaty to Eliminate INF from Europe; TASS: White House Rejects Treaty of Tatotonga; Soviet Paper on Congressional Divisions on Moratorium; Turkish Officials on Deployment of Nuclear Weapons; and others.

  9. Stirling engine power control

    DOE Patents [OSTI]

    Fraser, James P. (Scotia, NY)

    1983-01-01T23:59:59.000Z

    A power control method and apparatus for a Stirling engine including a valved duct connected to the junction of the regenerator and the cooler and running to a bypass chamber connected between the heater and the cylinder. An oscillating zone of demarcation between the hot and cold portions of the working gas is established in the bypass chamber, and the engine pistons and cylinders can run cold.

  10. Automated manual transmission controller

    DOE Patents [OSTI]

    Lawrie, Robert E. (Whitmore Lake, MI); Reed, Jr., Richard G. (Royal Oak, MI); Bernier, David R. (Rochester Hills, MI)

    1999-12-28T23:59:59.000Z

    A powertrain system for a hybrid vehicle. The hybrid vehicle includes a heat engine, such as a diesel engine, and an electric machine, which operates as both an electric motor and an alternator, to power the vehicle. The hybrid vehicle also includes a manual-style transmission configured to operate as an automatic transmission from the perspective of the driver. The engine and the electric machine drive an input shaft which in turn drives an output shaft of the transmission. In addition to driving the transmission, the electric machine regulates the speed of the input shaft in order to synchronize the input shaft during either an upshift or downshift of the transmission by either decreasing or increasing the speed of the input shaft. When decreasing the speed of the input shaft, the electric motor functions as an alternator to produce electrical energy which may be stored by a storage device. Operation of the transmission is controlled by a transmission controller which receives input signals and generates output signals to control shift and clutch motors to effect smooth launch, upshift shifts, and downshifts of the transmission, so that the transmission functions substantially as an automatic transmission from the perspective of the driver, while internally substantially functioning as a manual transmission.

  11. Environmental Control Technology

    SciTech Connect (OSTI)

    NONE

    1997-02-10T23:59:59.000Z

    Operations and maintenance continued this month at the Electric Power Research Institute's (EPRI's) Environmental Control Technology Center (ECTC). Testing for the Hazardous Air Pollutants (HAP) study was conducted using the Carbon Injection System (the 4.0 MW Spray Dryer Absorber and the Pulse-Jet Fabric Filter). Testing also continued across the B&W/CHX Heat Exchanger this month as the effects of increased particulate loading are being studied. The 1.0 MW Cold-Side Selective Catalytic Reduction (SCR) unit and the 4.0 MW Pilot Wet Scrubber remained idle this month in a cold-standby mode and were inspected regularly. On September 13, 1996, the ECTC completed an independent test block for a third-party company, Air Purification Inc. (API). For this testing, the ECTC's staff (O&M and Testing) were contracted to conduct performance and validation testing across a new, integrated emissions control device, the Rotorfilter{trademark}. This testing was conducted for a thirty (30) day period simultaneously with the B&W/CHX test block. The HAP testing resumed as this third-party test block was completed. Testing in September at the Electric Power Research Institute's (EPRI's) Environmental Control Technology Center (ECTC) included tests from the Pilot Trace Elements Removal (TER) test block as part of EPRI's overall program to develop control technology options for reduction of trace element emissions. This experimental program investigates mercury removal and mercury speciation under different operating conditions. The 1996 program is being performed on the 4.0 MW wet FGD pilot unit and the spray dryer/pulse jet fabric filter (SDA/PJFF) pilot units. The 1996 Trace Elements Removal (TER) test block is a continuation of the 1995 TER test block and will focus on up to five research areas, depending on experimental results. These areas are: (1) Mercury speciation methods; (2) Effect of FGD system operating variables on mercury removal; (3) Novel methods for elemental mercury control; (4) Catalytic methods for converting elemental mercury to oxidized mercury; and (5) Electrostatic charging of particulate material in the FGD inlet flue gas stream.

  12. Retrofit Diesel Emissions Control System Providing 50% NOxControl

    Broader source: Energy.gov (indexed) [DOE]

    Retrofit Diesel Emissions Control System Providing 50% NOx Control D. Yee, B. Adair, A. Boleda, B. Berry, T. Caron, J. Cizeron, T. Kinney, K. Lundberg and R. Dalla Betta Catalytica...

  13. A Verified Hybrid Controller For Automated Vehicles

    E-Print Network [OSTI]

    Lygeros, J.; Godbole, D. N.; Sastry, S.

    1997-01-01T23:59:59.000Z

    con- trollers for vehicle automation," in American ControlTomizuka, Vehicle lateral control for highway automation,"

  14. CUNY EXPORT CONTROL PROCEDURES 21. Export Control Training and Assessment

    E-Print Network [OSTI]

    Rosen, Jay

    CUNY EXPORT CONTROL PROCEDURES 21. Export Control Training and Assessment This Section addresses to annual export control training sessions open to faculty and administrators, OVCR makes available ongoing export briefing sessions on an as-needed basis. These sessions are designed to answer specific questions

  15. Controllability of Dynamical Extensions with Bounded Control: Application to Robotics

    E-Print Network [OSTI]

    Sontag, Eduardo

    1 Controllability of Dynamical Extensions with Bounded Control: Application to Robotics Monique. An application to the motion plan- ning problem for a class of two-driving-wheel mobile robots illustrates- vated by applications coming from robotics, we extend these results to the situation of bounded controls

  16. Advanced Motion Control: An Adaptive Robust Control Framework

    E-Print Network [OSTI]

    Yao, Bin

    control implementation platform rather affordable and a standard choice for any modern precision machines. Such a hardware configuration enables the control of the overall system to be constructed in the same way as what information that is available in the computer based control systems. The theoretically solid nonlinear

  17. Limits of optimal control yields achievable with quantum controllers

    E-Print Network [OSTI]

    Re-Bing Wu; Constantin Brif; Matthew R. James; Herschel Rabitz

    2015-05-03T23:59:59.000Z

    In quantum optimal control theory, kinematic bounds are the minimum and maximum values of the control objective achievable for any physically realizable system dynamics. For a given initial state of the system, these bounds depend on the nature and state of the controller. We consider a general situation where the controlled quantum system is coupled to both an external classical field (referred to as a classical controller) and an auxiliary quantum system (referred to as a quantum controller). In this general situation, the kinematic bound is between the classical kinematic bound (CKB), corresponding to the case when only the classical controller is available, and the quantum kinematic bound (QKB), corresponding to the ultimate physical limit of the objective's value. Specifically, when the control objective is the expectation value of a quantum observable (a Hermitian operator on the system's Hilbert space), the QKBs are the minimum and maximum eigenvalues of this operator. We present, both qualitatively and quantitatively, the necessary and sufficient conditions for surpassing the CKB and reaching the QKB, through the use of a quantum controller. The general conditions are illustrated by examples in which the system and controller are initially in thermal states. The obtained results provide a basis for the design of quantum controllers capable of maximizing the control yield and reaching the ultimate physical limit.

  18. The quantum systems control and the optimal control theory

    E-Print Network [OSTI]

    V. F. Krotov

    2008-05-22T23:59:59.000Z

    Mathematical theory of the quantum systems control is based on some ideas of the optimal control theory. These ideas are developed here as applied to these systems. The results obtained meet the deficiencies in the basis and algorithms of the control synthesis and expand the application of these methods.

  19. Hamiltonian control systems From modeling to analysis and control

    E-Print Network [OSTI]

    Knobloch,Jürgen

    Hamiltonian control systems From modeling to analysis and control Arjan van der Schaft Johann-based modeling 3 Definition of port-Hamiltonian systems 4 Scattering: from power variables to wave variables 5, University of Groningen, the Netherlands DiHamiltonian control systems Elgersburg School, March, 2012 1 / 108

  20. Intelligent fuzzy supervisory control for distillation columns

    E-Print Network [OSTI]

    Santhanam, Srinivasan

    1993-01-01T23:59:59.000Z

    problem. Multivariable design techniques are used to control the column. Some of the different multivariable techniques which have been used in the distillation column control include decoupling control, optimal control and internal model control [5...

  1. Shared Control Multiprocessors A Paradigm for Supporting

    E-Print Network [OSTI]

    Wilsey, Philip A.

    control architectures. This model, called shared control, overcomes the inefficiency of SIMD machinesShared Control Multiprocessors ­ A Paradigm for Supporting Control Parallelism on SIMD Abstract Parallel architectures are commonly classified according to their control organization as either

  2. Soft Selves and Ecological Control 

    E-Print Network [OSTI]

    Clark, Andy

    2006-01-01T23:59:59.000Z

    Advanced biological brains are by nature open-ended opportunistic controllers. Such controllers compute, pretty much on a moment-to-moment basis, what problem-solving resources are readily available and recruit them into temporary problem...

  3. Optimal control, parabolic equations, st

    E-Print Network [OSTI]

    2008-12-22T23:59:59.000Z

    In this paper we study the optimal control problem of the heat equation by a distributed control over a subset of the domain, in the presence of a state constraint.

  4. Computer Control of Boiler Operation

    E-Print Network [OSTI]

    Pareja, G. E.

    1981-01-01T23:59:59.000Z

    Rapidly rising energy costs present the opportunity for substantial cost savings through improved boiler combustion control. A process computer control system was installed at an Air Products & Chemicals facility in 1978. As a result the boiler...

  5. PEP instrumentation and control system

    SciTech Connect (OSTI)

    Melen, R.

    1980-06-01T23:59:59.000Z

    This paper describes the operating characteristics of the primary components that form the PEP Instrumentation and Control System. Descriptions are provided for the computer control system, beam monitors, and other support systems.

  6. Can fungal biopesticides control malaria? 

    E-Print Network [OSTI]

    Thomas, Matt B; Read, Andrew F

    2007-01-01T23:59:59.000Z

    Recent research has raised the prospect of using insect fungal pathogens for the control of vector-borne diseases such as malaria. In the past, microbial control of insect pests in both medical and agricultural sectors ...

  7. Qubit dynamics under alternating controls

    E-Print Network [OSTI]

    Aiello, Clarice Demarchi

    2014-01-01T23:59:59.000Z

    In this thesis, we discuss two problems of quantum dynamics in the presence of alternating controls. Alternating controls arise in many protocols designed to extend the duration over which a qubit is a useful computational ...

  8. Division 1137 property control system

    SciTech Connect (OSTI)

    Pastor, D.J.

    1982-01-01T23:59:59.000Z

    An automated data processing property control system was developed by Mobile and Remote Range Division 1137. This report describes the operation of the system and examines ways of using it in operational planning and control.

  9. Nuclear power plant control room operator control and monitoring tasks

    SciTech Connect (OSTI)

    Bovell, C.R.; Beck, M.G. [Concord Associates, Inc., Knoxville, TN (United States); Carter, R.J. [Oak Ridge National Labs., TN (United States)

    1998-07-01T23:59:59.000Z

    Oak Ridge National Laboratory is conducting a research project the purpose of which is to develop the technical bases for regulatory review criteria for use in evaluating the safety implications of human factors associated with the use of artificial intelligence and expert systems, and with advanced instrumentation and control (I and C) systems in nuclear power plants (NPP). This report documents the results from Task 8 of that project. The primary objectives of the task was to identify the scope and type of control and monitoring tasks now performed by control-room operators. Another purpose was to address the types of controls and safety systems needed to operate the nuclear plant. The final objective of Task 8 was to identify and categorize the type of information and displays/indicators required to monitor the performance of the control and safety systems. This report also discusses state-of-the-art controls and advanced display devices which will be available for use in control-room retrofits and in control room of future plants. The fundamental types of control and monitoring tasks currently conducted by operators can be divided into four classifications: function monitoring tasks, control manipulation tasks, fault diagnostic tasks, and administrative tasks. There are three general types of controls used in today`s NPPs, switches, pushbuttons, and analog controllers. Plant I and C systems include components to achieve a number of safety-related functions: measuring critical plant parameters, controlling critical plant parameters within safety limits, and automatically actuating protective devices if safe limits are exceeded. The types of information monitored by the control-room operators consist of the following parameters: pressure, fluid flow and level, neutron flux, temperature, component status, water chemistry, electrical, and process and area radiation. The basic types of monitoring devices common to nearly all NPP control rooms include: analog meters, graphic recorders, digital displays and counters, light indicators, visual and audio alarms, and cathode-ray tubes.

  10. MATERIAL CONTROL ACCOUNTING INMM

    SciTech Connect (OSTI)

    Hasty, T.

    2009-06-14T23:59:59.000Z

    Since 1996, the Mining and Chemical Combine (MCC - formerly known as K-26), and the United States Department of Energy (DOE) have been cooperating under the cooperative Nuclear Material Protection, Control and Accounting (MPC&A) Program between the Russian Federation and the U.S. Governments. Since MCC continues to operate a reactor for steam and electricity production for the site and city of Zheleznogorsk which results in production of the weapons grade plutonium, one of the goals of the MPC&A program is to support implementation of an expanded comprehensive nuclear material control and accounting (MC&A) program. To date MCC has completed upgrades identified in the initial gap analysis and documented in the site MC&A Plan and is implementing additional upgrades identified during an update to the gap analysis. The scope of these upgrades includes implementation of MCC organization structure relating to MC&A, establishing material balance area structure for special nuclear materials (SNM) storage and bulk processing areas, and material control functions including SNM portal monitors at target locations. Material accounting function upgrades include enhancements in the conduct of physical inventories, limit of error inventory difference procedure enhancements, implementation of basic computerized accounting system for four SNM storage areas, implementation of measurement equipment for improved accountability reporting, and both new and revised site-level MC&A procedures. This paper will discuss the implementation of MC&A upgrades at MCC based on the requirements established in the comprehensive MC&A plan developed by the Mining and Chemical Combine as part of the MPC&A Program.

  11. Thermionic Converter Temperature Controller

    SciTech Connect (OSTI)

    Shaner,B. J.; Wolf, Joseph H.; Johnson, Robert G. R.

    1999-08-23T23:59:59.000Z

    A method and apparatus for controlling the temperature of a thermionic reactor over a wide range of operating power, including a thermionic reactor having a plurality of integral cesium reservoirs, a honeycomb material disposed about the reactor which has a plurality of separated cavities, a solid sheath disposed about the honeycomb material and having an opening therein communicating with the honeycomb material and cavities thereof, and a shell disposed about the sheath for creating a coolant annulus therewith so that the coolant in the annulus may fill the cavities and permit nucleate boiling during the operation of the reactor.

  12. Thermionic converter temperature controller

    DOE Patents [OSTI]

    Shaner, Benjamin J. (McMurray, PA); Wolf, Joseph H. (Pittsburgh, PA); Johnson, Robert G. R. (Trafford, PA)

    2001-04-24T23:59:59.000Z

    A method and apparatus for controlling the temperature of a thermionic reactor over a wide range of operating power, including a thermionic reactor having a plurality of integral cesium reservoirs, a honeycomb material disposed about the reactor which has a plurality of separated cavities, a solid sheath disposed about the honeycomb material and having an opening therein communicating with the honeycomb material and cavities thereof, and a shell disposed about the sheath for creating a coolant annulus therewith so that the coolant in the annulus may fill the cavities and permit nucleate boiling during the operation of the reactor.

  13. Nuclear reactor control assembly

    SciTech Connect (OSTI)

    Negron, S.B.

    1991-06-11T23:59:59.000Z

    This patent describes an assembly for providing global power control in a nuclear reactor having the core split into two halves. It comprises a disk assembly formed from at least two disks each machined with an identical surface hole pattern such that rotation of one disk relative to the other causes the hole pattern to open or close, the disk assembly being positioned substantially at the longitudinal center of and coaxial with the core halves; and means for rotating at least one of the disks relative to the other.

  14. Controlling Feral Pigeons

    E-Print Network [OSTI]

    Texas Wildlife Services

    2008-04-15T23:59:59.000Z

    also have limited use. Ultrasonic sound devices are manufactured for pigeon control, although their effectiveness is questionable. Sometimes spraying roosting pigeons with streams of water will cause the birds to relocate; however, it must be done... can then be caught by hand or in nets. When handling pigeons in enclosed areas, it is wise to use a face mask with a dust filter to avoid possible histoplasmosis infection. Funnel Trap. A funnel trap can be made easily using 1- x 2-inch welded wire...

  15. Controlled spontaneous emission

    E-Print Network [OSTI]

    Jae-Seung Lee; Mary A. Rohrdanz; A. K. Khitrin

    2007-07-03T23:59:59.000Z

    The problem of spontaneous emission is studied by a direct computer simulation of the dynamics of a combined system: atom + radiation field. The parameters of the discrete finite model, including up to 20k field oscillators, have been optimized by a comparison with the exact solution for the case when the oscillators have equidistant frequencies and equal coupling constants. Simulation of the effect of multi-pulse sequence of phase kicks and emission by a pair of atoms shows that both the frequency and the linewidth of the emitted spectrum could be controlled.

  16. Control vectors for splines

    E-Print Network [OSTI]

    Kosinka, Ji?i; Sabin, Malcolm A.; Dodgson, Neil A.

    2014-09-03T23:59:59.000Z

    ), but every control point Pi is associated with a sharpness si. If a non-integer value of sharpness s is required, one can use linear interpolation between the results corresponding to ?s? and ?s?. In the real world, creases on objects are typically semi... vertices present an interesting avenue for future research. It should also be noted that our framework is not limited to sur- faces and subdivision schemes based on quadrilaterals. For exam- ple, in the spirit of Fig. 5, the combination of the approximating...

  17. Electrical Demand Control

    E-Print Network [OSTI]

    Eppelheimer, D. M.

    1984-01-01T23:59:59.000Z

    to the reservoir. Util i ties have iiting for a number of years. d a rebate for reducing their When the utility needs to shed is sent to turn off one or mnre mer's electric water heater or equipment. wges have enticed more and more same strategies... an increased need for demand 1 imiting. As building zone size is reduced, total instal led tonnage increases due to inversfty. Each compressor is cycled by a space thermostat. There is no control system to limit the number of compressors running at any...

  18. Control the Present

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power Administration would likeConstitution And BylawsMetal-Organic Frameworks | The7019Control

  19. Controlling DNA Methylation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power Administration would likeConstitution And BylawsMetal-Organic FrameworksControlling DNA

  20. Controlling Graphene's Electronic Structure

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power Administration would likeConstitution And BylawsMetal-OrganicControlling Graphene's

  1. Controlling Graphene's Electronic Structure

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power Administration would likeConstitution And BylawsMetal-OrganicControlling

  2. Controlling Graphene's Electronic Structure

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power Administration would likeConstitution AndControlling Graphene's Electronic Structure

  3. Exercise Controller and Evaluator Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1997-08-21T23:59:59.000Z

    This volume details the roles of controllers and evaluators in emergency exercises. Canceled by DOE G 151.1-3.

  4. Lindbladians for controlled stochastic Hamiltonians

    E-Print Network [OSTI]

    J. E. Avron; O. Kenneth; A. Retzker; M. Shalyt

    2014-12-08T23:59:59.000Z

    We construct Lindbladians associated with controlled stochastic Hamiltonians in weak coupling. This allows to determine the power spectrum of the noise from measurements of dephasing rates; to optimize the control and to test numerical algorithms that solve controlled stochastic Schrodinger equations. A few examples are worked out in detail.

  5. UMass Amherst Export Control Seminar

    E-Print Network [OSTI]

    Mountziaris, T. J.

    1 UMass Amherst Export Control Seminar Liz Rodriguez Associate Counsel University of Massachusetts Policy Goals Restrict Exports of Goods and Technology that could Lend a Military Advantage to our;10 Export Send or Take a Controlled Item Outside of the United States Release of Controlled Item

  6. CONTROL FOR AN OPTICALLY POWERED

    E-Print Network [OSTI]

    #12;CONTROL FOR AN OPTICALLY POWERED FIRING SET USING MINIATURE PHOTOVOLTAIC ARRAYS BY TODD EDWARDAL85000 #12;CONTROL FOR AN OPTICALLY POWERED FIRING SET USING MINIATURE PHOTOVOLTAIC ARRAYS BY TODD of Science Electrical Engineering The University of New Mexico Albuquerque, New Mexico May, 2009 #12;CONTROL

  7. IMPLEMENTATION CONSIDERATIONS IN SUPERVISORY CONTROL

    E-Print Network [OSTI]

    Malik, Petra

    the behaviour of asynchronous controllers and their environment. The environment (also called plant) is modeledIMPLEMENTATION CONSIDERATIONS IN SUPERVISORY CONTROL P. Dietrich Dept. of Computer Science Corporate Research, CT SE 4, 81730 Munich, Germany robi.malik@mchp.siemens.de W.M. Wonham System Control

  8. RECOMMENDED SECURITY CONTROLS FOR FEDERAL

    E-Print Network [OSTI]

    May 2005 RECOMMENDED SECURITY CONTROLS FOR FEDERAL INFORMATION SYSTEMS: GUIDANCE FOR SELECTING COST-EFFECTIVE CONTROLS USING A RISK-BASED PROCESS Shirley Radack, Editor, Computer Security Division, Information Technology Laboratory National Institute of Standards and Technology Security controls are the management

  9. INTEGRATED GHz VOLTAGE CONTROLLED OSCILLATORS

    E-Print Network [OSTI]

    Kinget, Peter

    INTEGRATED GHz VOLTAGE CONTROLLED OSCILLATORS Peter Kinget Bell Labs - Lucent Technologies Murray Hill, NJ (USA) Abstract The voltage controlled oscillator (VCO) is a critical sub. We focus on the de- sign of a critical sub-block: the voltage controlled oscillator (VCO). We review

  10. Model Based Control Refrigeration Systems

    E-Print Network [OSTI]

    Model Based Control of Refrigeration Systems Ph.D. Thesis Lars Finn Sloth Larsen Central R & D University, Denmark. The work has been carried out at the Central R&D - Refrigeration and Air Conditioning The subject for this Ph.D. thesis is model based control of refrigeration systems. Model based control covers

  11. Variable Structure Control of a

    E-Print Network [OSTI]

    Ge, Shuzhi Sam

    . INTRODUCTION Modelling and control of flexible link manipulators have been studied intensively controller for regulation of a flexible beam. Due to its simplicity and robustness to parametricVariable Structure Control of a Distributed-Parameter Flexible Beam S. S. Ge,* T. H. Lee, G. Zhu, F

  12. MANDATORY MEASURES OUTDOOR LIGHTING CONTROLS

    E-Print Network [OSTI]

    California at Davis, University of

    MANDATORY MEASURES OUTDOOR LIGHTING CONTROLS (Reference: Sub-Chapter 4, Section 130.2) #12;SECTION level of each multi-tier garage. · General lighting must have occupant sensing controls with at least one control step between 20% and 50% of design lighting power · No more than 500 watts of rated

  13. Model Predictive Control Wind Turbines

    E-Print Network [OSTI]

    Model Predictive Control of Wind Turbines Martin Klauco Kongens Lyngby 2012 IMM-MSc-2012-65 #12;Summary Wind turbines are the biggest part of the green energy industry. Increasing interest control strategies. Control strategy has a significant impact on the wind turbine operation on many levels

  14. Role-Based Access Controls

    E-Print Network [OSTI]

    Ferraiolo, David F

    2009-01-01T23:59:59.000Z

    While Mandatory Access Controls (MAC) are appropriate for multilevel secure military applications, Discretionary Access Controls (DAC) are often perceived as meeting the security processing needs of industry and civilian government. This paper argues that reliance on DAC as the principal method of access control is unfounded and inappropriate for many commercial and civilian government organizations. The paper describes a type of non-discretionary access control - role-based access control (RBAC) - that is more central to the secure processing needs of non-military systems then DAC.

  15. Digital control of HVDC converters

    SciTech Connect (OSTI)

    Pilotto, L.A.S.; Roitman, M.; Alves, J.E.R.

    1989-05-01T23:59:59.000Z

    This paper presents the project of a completely digital HVDC converter controller based on a 16-bit microcomputer. It was decided to achieve as much as possible by software in order to minimize functions performed by external hardware. The presented design comprises software programmed functions such as a PID current control amplifier, voltage dependent current order limiters and an alpha-minimum symmetrization unit, among others. HVDC control principles are briefly reviewed and a detailed description of both the hardware and software structure of the controller is presented. The digital controller was implemented in an HVDC simulator and several dynamic performance tests demonstrated the efficiency of the proposed methodology.

  16. Adaptive gain improves reactor control

    SciTech Connect (OSTI)

    Whatley, M.J.; Pott, D.C.

    1984-05-01T23:59:59.000Z

    An interesting application of the modern control theory technique called adaptive control is presently in use on a process located at a plant in the Standard Oil Co. (Ind.) system. The results of this application are: first, the transformation of an uncontrollable process to a controllable one; and, second, a significant economic savings to the corporation. It also shows that a detailed analysis of the mechanical, chemical and control systems can provide both the basis for revising an existing control system and some of the reasons why that system is inadequate. The contrast between classical and modern control theories is seen in four major areas. In classical systems, the controller manipulates the error to calculate its output. The error is subjected to a limited number of analog computing functions such as multiplication by a constant and integration. Each controller has one specific strategy--to hold the measured variable at the setpoint. And each controller controls only one variable, independent of all others. In a modern system, the controller can manipulate many different variables in addition to the error to compute its output. Its computing power is unlimited in a practical sense. It can do all classical computations plus many others, including a table look-up. The controller can independently change its strategy as a function of time or the condition of the process. It can also control many variables at one time to accomplish a complex objective. The implementation of a modern control theory project requires a good understanding of the dynamic, as well as the steady-state character of the process. As you can see we are limited only by our understanding of the process, our imagination, and the economics of the situation.

  17. Adaptive control for accelerators

    DOE Patents [OSTI]

    Eaton, Lawrie E. (Los Alamos, NM); Jachim, Stephen P. (Los Alamos, NM); Natter, Eckard F. (Santa Fe, NM)

    1991-01-01T23:59:59.000Z

    An adaptive feedforward control loop is provided to stabilize accelerator beam loading of the radio frequency field in an accelerator cavity during successive pulses of the beam into the cavity. A digital signal processor enables an adaptive algorithm to generate a feedforward error correcting signal functionally determined by the feedback error obtained by a beam pulse loading the cavity after the previous correcting signal was applied to the cavity. Each cavity feedforward correcting signal is successively stored in the digital processor and modified by the feedback error resulting from its application to generate the next feedforward error correcting signal. A feedforward error correcting signal is generated by the digital processor in advance of the beam pulse to enable a composite correcting signal and the beam pulse to arrive concurrently at the cavity.

  18. Controlling exhaust gas recirculation

    DOE Patents [OSTI]

    Zurlo, James Richard (Madison, WI); Konkle, Kevin Paul (West Bend, WI); May, Andrew (Milwaukee, WI)

    2012-01-31T23:59:59.000Z

    In controlling an engine, an amount of an intake charge provided, during operation of the engine, to a combustion chamber of the engine is determined. The intake charge includes an air component, a fuel component and a diluent component. An amount of the air component of the intake charge is determined. An amount of the diluent component of the intake charge is determined utilizing the amount of the intake charge, the amount of the air component and, in some instances, the amount of the fuel component. An amount of a diluent supplied to the intake charge is adjusted based at least in part on the determined amount of diluent component of the intake charge.

  19. Efficient idempotent methods for optimal control

    E-Print Network [OSTI]

    Deshpande, Ameet Shridhar

    2009-01-01T23:59:59.000Z

    an optimal control problem for switched linear systems. Letan optimal control problem for a switched linear system. Foran optimal control problem for a switched linear system. For

  20. Modeling And Control Of Articulated Vehicles

    E-Print Network [OSTI]

    Chen, Chieh; Tomizuka, Masayoshi

    1997-01-01T23:59:59.000Z

    Modeling, Advanced Vehicle Control Systems, Lateral control, SteeringSteering and Braking Control of Heavy Duty Vehicles. Under this project, dynamic modeling

  1. On Cyber Security for Networked Control Systems

    E-Print Network [OSTI]

    Amin, Saurabh

    2011-01-01T23:59:59.000Z

    her students on security of process control systems. I amcyber-security tools for process control systems. In theon the security mechanisms of process control systems, few

  2. Synthetic Control of Organic Semiconductor Excited States

    E-Print Network [OSTI]

    Clem, Tabitha Ann

    2010-01-01T23:59:59.000Z

    controlled Keithley 236 SMU. References Thompson, B. ;controlled Keithley 236 SMU. References Markov, D. E. ;controlled Keithley 236 SMU. Polymer mobility was measured

  3. Demand Controlled Ventilation and Classroom Ventilation

    E-Print Network [OSTI]

    Fisk, William J.

    2014-01-01T23:59:59.000Z

    use of demand control ventilation systems in general officedemand controlled  ventilation systems, Dennis DiBartolomeo the demand controlled ventilation system increased the rate 

  4. Demand Controlled Ventilation and Classroom Ventilation

    E-Print Network [OSTI]

    Fisk, William J.

    2014-01-01T23:59:59.000Z

    of energy and environmental benefits of demand controlled indicate the energy and cost savings for  demand controlled 24) (California Energy  Commission 2008), demand controlled 

  5. Nonlinear Control of Delay and PDE Systems

    E-Print Network [OSTI]

    Bekiaris-Liberis, Nikolaos

    delay systems, IEEE Transactions on Automatic Control, 56 (lag systems, IEEE Transactions on Automatic Control, 31 (nonlinear systems, IEEE Transactions on Automatic Control,

  6. Robustness of Controlled Quantum Dynamics

    E-Print Network [OSTI]

    Andy Koswara; Raj Chakrabarti

    2014-09-29T23:59:59.000Z

    Control of multi-level quantum systems is sensitive to implementation errors in the control field and uncertainties associated with system Hamiltonian parameters. A small variation in the control field spectrum or the system Hamiltonian can cause an otherwise optimal field to deviate from controlling desired quantum state transitions and reaching a particular objective. An accurate analysis of robustness is thus essential in understanding and achieving model-based quantum control, such as in control of chemical reactions based on ab initio or experimental estimates of the molecular Hamiltonian. In this paper, theoretical foundations for quantum control robustness analysis are presented from both a distributional perspective - in terms of moments of the transition amplitude, interferences, and transition probability - and a worst-case perspective. Based on this theory, analytical expressions and a computationally efficient method for determining the robustness of coherently controlled quantum dynamics are derived. The robustness analysis reveals that there generally exists a set of control pathways that are more resistant to destructive interferences in the presence of control field and system parameter uncertainty. These robust pathways interfere and combine to yield a relatively accurate transition amplitude and high transition probability when uncertainty is present.

  7. Air Pollution Control Regulations: No.27 - Control of Nitrogen...

    Broader source: Energy.gov (indexed) [DOE]

    sources which have the potential to emit 50 tons but do not actually reach that level) and Reasonably Available Control Technology (RACT) Plan Requirements for high NOx emitters...

  8. ELECTRONIC CONTROLLER DEVELOPMENT AND EVALUATION OF CONTROL STRATEGIES

    E-Print Network [OSTI]

    Wahlig, M.

    2011-01-01T23:59:59.000Z

    for the heat from solar collectors and for the buildingbalance tests using solar collector and simulator heat inputto test solar control strategies. Collector simulator. A "

  9. Subsurface Contamination Control

    SciTech Connect (OSTI)

    Y. Yuan

    2001-12-12T23:59:59.000Z

    There are two objectives of this report, ''Subsurface Contamination Control''. The first is to provide a technical basis for recommending limiting radioactive contamination levels (LRCL) on the external surfaces of waste packages (WP) for acceptance into the subsurface repository. The second is to provide an evaluation of the magnitude of potential releases from a defective WP and the detectability of the released contents. The technical basis for deriving LRCL has been established in ''Retrieval Equipment and Strategy for Wp on Pallet'' (CRWMS M and O 2000g, 6.3.1). This report updates the derivation by incorporating the latest design information of the subsurface repository for site recommendation. The derived LRCL on the external surface of WPs, therefore, supercede that described in CRWMS M and O 2000g. The derived LRCL represent the average concentrations of contamination on the external surfaces of each WP that must not be exceeded before the WP is to be transported to the subsurface facility for emplacement. The evaluation of potential releases is necessary to control the potential contamination of the subsurface repository and to detect prematurely failed WPs. The detection of failed WPs is required in order to provide reasonable assurance that the integrity of each WP is intact prior to MGR closure. An emplaced WP may become breached due to manufacturing defects or improper weld combined with failure to detect the defect, by corrosion, or by mechanical penetration due to accidents or rockfall conditions. The breached WP may release its gaseous and volatile radionuclide content to the subsurface environment and result in contaminating the subsurface facility. The scope of this analysis is limited to radioactive contaminants resulting from breached WPs during the preclosure period of the subsurface repository. This report: (1) documents a method for deriving LRCL on the external surfaces of WP for acceptance into the subsurface repository; (2) provides a table of derived LRCL for nuclides of radiological importance; (3) Provides an as low as is reasonably achievable (ALARA) evaluation of the derived LRCL by comparing potential onsite and offsite doses to documented ALARA requirements; (4) Provides a method for estimating potential releases from a defective WP; (5) Provides an evaluation of potential radioactive releases from a defective WP that may become airborne and result in contamination of the subsurface facility; and (6) Provides a preliminary analysis of the detectability of a potential WP leak to support the design of an airborne release monitoring system.

  10. Integrated control system and method

    DOE Patents [OSTI]

    Wang, Paul Sai Keat; Baldwin, Darryl; Kim, Myoungjin

    2013-10-29T23:59:59.000Z

    An integrated control system for use with an engine connected to a generator providing electrical power to a switchgear is disclosed. The engine receives gas produced by a gasifier. The control system includes an electronic controller associated with the gasifier, engine, generator, and switchgear. A gas flow sensor monitors a gas flow from the gasifier to the engine through an engine gas control valve and provides a gas flow signal to the electronic controller. A gas oversupply sensor monitors a gas oversupply from the gasifier and provides an oversupply signal indicative of gas not provided to the engine. A power output sensor monitors a power output of the switchgear and provide a power output signal. The electronic controller changes gas production of the gasifier and the power output rating of the switchgear based on the gas flow signal, the oversupply signal, and the power output signal.

  11. Diamond turning machine controller implementation

    SciTech Connect (OSTI)

    Garrard, K.P.; Taylor, L.W.; Knight, B.F.; Fornaro, R.J.

    1988-12-01T23:59:59.000Z

    The standard controller for a Pnuemo ASG 2500 Diamond Turning Machine, an Allen Bradley 8200, has been replaced with a custom high-performance design. This controller consists of four major components. Axis position feedback information is provided by a Zygo Axiom 2/20 laser interferometer with 0.1 micro-inch resolution. Hardware interface logic couples the computers digital and analog I/O channels to the diamond turning machine`s analog motor controllers, the laser interferometer, and other machine status and control information. It also provides front panel switches for operator override of the computer controller and implement the emergency stop sequence. The remaining two components, the control computer hardware and software, are discussed in detail below.

  12. Pump control system for windmills

    DOE Patents [OSTI]

    Avery, Don E. (45-437 Akimala St., Honolulu, HI 96744)

    1983-01-01T23:59:59.000Z

    A windmill control system having lever means, for varying length of stroke of the pump piston, and a control means, responsive to the velocity of the wind to operate the lever means to vary the length of stroke and hence the effective displacement of the pump in accordance with available wind energy, with the control means having a sensing member separate from the windmill disposed in the wind and displaceable thereby in accordance with wind velocity.

  13. Microprocessor–based monochromator controller

    E-Print Network [OSTI]

    Dalle-Molle, Richard; Defreese, James D.

    1980-04-01T23:59:59.000Z

    Microprocessor-based monochromator controller Richard Dalle-Molle and James D. Defreese* University of Kansas, Department of Chemistry, Lawrence, Kansas 66045, USA. Introduction The modular nature of the EU-700 series spectrometers (GCA... put under the control of another computer. The microprocessor was chosen in preference to other types of "hardware" controllers for a number of reasons; it is easier to implement, easier to modify the design and it is more adaptable to changing...

  14. Computer Control of Boiler Operation 

    E-Print Network [OSTI]

    Pareja, G. E.

    1981-01-01T23:59:59.000Z

    , capability to burn multiple fuels, faster response to demand changes, and fewer shutdowns. INTRODUCTION With the cost of energy r1s1ng so rapidly, more intense scrutiny is given to the purchase of new boiler control systems, as well as to the re... placement of old and outdated boiler controls. More advanced boiler controls are capable of maximizing the efficiency of a boiler steam production process, and thereby minimize the use of the purchased fuels. The elaborate systems which were previously...

  15. Controlling landfill closure costs

    SciTech Connect (OSTI)

    Millspaugh, M.P.; Ammerman, T.A. [Spectra Engineering, Latham, NY (United States)

    1995-05-01T23:59:59.000Z

    Landfill closure projects are significant undertakings typically costing well over $100,000/acre. Innovative designs, use of alternative grading and cover materials, and strong project management will substantially reduce the financial impact of a landfill closure project. This paper examines and evaluates the various elements of landfill closure projects and presents various measures which can be employed to reduce costs. Control measures evaluated include: the beneficial utilization of alternative materials such as coal ash, cement kiln dust, paper mill by-product, construction surplus soils, construction debris, and waste water treatment sludge; the appropriate application of Mandate Relief Variances to municipal landfill closures for reduced cover system requirements and reduced long-term post closure monitoring requirements; equivalent design opportunities; procurement of consulting and contractor services to maximize project value; long-term monitoring strategies; and grant loan programs. An analysis of closure costs under differing assumed closure designs based upon recently obtained bid data in New York State, is also provided as a means for presenting the potential savings which can be realized.

  16. Nuclear reactor control rod

    SciTech Connect (OSTI)

    Cearley, J.E.; Izzo, K.R.

    1987-06-30T23:59:59.000Z

    This patent describes a vertically oriented bottom entry control rod from a nuclear reactor: a frame including an elongated central spine of cruciform cross section connected between an upper support member and a lower support member both of cruciform shape having four laterally extending arms. The arms are in alignment with the arms of the lower support member and each aligned upper and lower support members has a sheath extending between; absorber plates of neutron absorber material, different from the material of the frame, one of the absorber plates is positioned within a sheath beneath each of the arms; attachment means suspends the absorber plates from the arms of the upper support member within a sheath; elongated absorber members positioned within a sheath between each of the suspended absorber plates and an arm of the lower support member; and joint means between the upper ends of the absorber members and the lower ends of the suspended absorber plates for minimizing gaps; the sheath means encloses the suspended absorber plates and the absorber members extending between aligned arms of the upper and lower support members and secured.

  17. Integrating preconcentrator heat controller

    DOE Patents [OSTI]

    Bouchier, Francis A. (Albuquerque, NM); Arakaki, Lester H. (Edgewood, NM); Varley, Eric S. (Albuquerque, NM)

    2007-10-16T23:59:59.000Z

    A method and apparatus for controlling the electric resistance heating of a metallic chemical preconcentrator screen, for example, used in portable trace explosives detectors. The length of the heating time-period is automatically adjusted to compensate for any changes in the voltage driving the heating current across the screen, for example, due to gradual discharge or aging of a battery. The total deposited energy in the screen is proportional to the integral over time of the square of the voltage drop across the screen. Since the net temperature rise, .DELTA.T.sub.s, of the screen, from beginning to end of the heating pulse, is proportional to the total amount of heat energy deposited in the screen during the heating pulse, then this integral can be calculated in real-time and used to terminate the heating current when a pre-set target value has been reached; thereby providing a consistent and reliable screen temperature rise, .DELTA.T.sub.s, from pulse-to-pulse.

  18. Enhanced Control Installations.pdf

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    correctness. Title: Individual Permit, High Priority Sites, Examples of Enhanced Control Installations, Poster, Individual Permit for Storm Water, NPDES Permit No. NM0030759...

  19. Baseline Control Measures.pdf

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Individual Permit Baseline Control Measures at Los Alamos National Laboratory, Poster, Individual Permit for Storm Water, NPDES Permit No. NM0030759 Author(s): Veenis, Steven J....

  20. Classified Matter Protection and Control

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1995-09-26T23:59:59.000Z

    Provides detailed requirements to supplement DOE O 471.2, which establishes policy for the protection and control of classified and unclassified information. Does not cancel other directives.

  1. Radiation Safety Work Control Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Radiation Safety Work Control Form (see instructions on pg-3) Rev. May 2014 Area: Form : Date: Preliminary Applicability Screen: (a) Will closing the beam line injection stoppers...

  2. Pollution Control Facilities (South Carolina)

    Broader source: Energy.gov [DOE]

    For the purpose of this legislation, pollution control facilities are defined as any facilities designed for the elimination, mitigation or prevention of air or water pollution, including all...

  3. Robust constrained model predictive control

    E-Print Network [OSTI]

    Richards, Arthur George, 1977-

    2005-01-01T23:59:59.000Z

    (cont.) multiple Uninhabited Aerial Vehicles (UAVs) demonstrate that the new DMPC algorithm offers significant computational improvement compared to its centralized counterpart. The controllers developed in this thesis are ...

  4. Nuclear Materials Control and Accountability

    Broader source: Energy.gov (indexed) [DOE]

    June 2011 DOE STANDARD Nuclear Materials Control and Accountability U.S. Department of Energy AREA SANS Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public...

  5. Water Pollution Control Act (Minnesota)

    Broader source: Energy.gov [DOE]

    This Act gives the Minnesota Pollution Control Agency broad responsibility to establish pollution standards for state waters; monitor water conditions and sources of pollution; review construction,...

  6. HCCI engine control and optimization

    E-Print Network [OSTI]

    Killingsworth, Nicholas J.

    2007-01-01T23:59:59.000Z

    control signal (b) during step response experiments of thecontrol signal (b) during step response experi- ments of theis calculated from a step response experiment carried out

  7. Fire Ants and Their Control.

    E-Print Network [OSTI]

    Hamman, Philip J.; Drees, Bastiaan M.; Vinson, S. Bradleigh

    1986-01-01T23:59:59.000Z

    fire ant control usually are labeled only for certain treatment sites. The techniques for applying these products also vary with the treatment sites. Care must be taken to select the best combination of control agents and application methods... in each situation to attain optimum results. The Non-Control Option - Why Consider it? In areas where fire ants are not causing a problem, it may be best not to attempt any control measures. The reason is that a unit area, sue as an acre ofland, ill...

  8. Johnson Controls ESCO Qualification Sheet

    Broader source: Energy.gov [DOE]

    Document outlines the energy service company (ESCO) qualifications for Johnson Controls in relation to the U.S. Department of Energy's (DOEs) energy savings performance contracts (ESPC).

  9. Quantum control theory and applications: A survey

    E-Print Network [OSTI]

    Daoyi Dong; Ian R Petersen

    2011-01-10T23:59:59.000Z

    This paper presents a survey on quantum control theory and applications from a control systems perspective. Some of the basic concepts and main developments (including open-loop control and closed-loop control) in quantum control theory are reviewed. In the area of open-loop quantum control, the paper surveys the notion of controllability for quantum systems and presents several control design strategies including optimal control, Lyapunov-based methodologies, variable structure control and quantum incoherent control. In the area of closed-loop quantum control, the paper reviews closed-loop learning control and several important issues related to quantum feedback control including quantum filtering, feedback stabilization, LQG control and robust quantum control.

  10. Adaptive excitation control in power systems

    E-Print Network [OSTI]

    Chiu, Pei-Chen

    2006-08-16T23:59:59.000Z

    This thesis presents an adaptive excitation controller of power systems. The control law is derived by using model reference adaptive control (MRAC) or adaptive pole placement control (APPC) and an equilibrium tracking mechanism is implemented...

  11. Optimal control for biological movement systems

    E-Print Network [OSTI]

    Li, Weiwei

    2006-01-01T23:59:59.000Z

    Kalman. When is a linear control system optimal? Journal ofOptimal stationary control of linear systems with control-J. Mclane. Optimal stochastic control of linear systems with

  12. THE UNIVERSITY OF NORTH TEXAS EXPORT CONTROLS

    E-Print Network [OSTI]

    Mohanty, Saraju P.

    Regulations ECCN Export Control Classification Number ECO Export Controls Officer ITAR International Traffic in Arms Regulations OFAC Office of Foreign Assets Control (U.S. Department of the Treasury) ORED Office1 ______________________________________________ THE UNIVERSITY OF NORTH TEXAS EXPORT CONTROLS

  13. Distributed vs. Centralized Power Systems Frequency Control

    E-Print Network [OSTI]

    Dimarogonas, Dimos

    Distributed vs. Centralized Power Systems Frequency Control Martin Andreasson12 , Dimos V control of electrical power systems. We propose a distributed controller which retains the reference class of large- scale systems are electrical power systems, which employ automatic generation control

  14. attitude control: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Magnetic Solar Simulation Workshop 2004 Spacecraft control type Passive control - Gravity gradient control - Spin controlAerospace Power & Electronics...

  15. attitude control systems: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Magnetic Solar Simulation Workshop 2004 Spacecraft control type Passive control - Gravity gradient control - Spin controlAerospace Power & Electronics...

  16. attitude control experiment: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Magnetic Solar Simulation Workshop 2004 Spacecraft control type Passive control - Gravity gradient control - Spin controlAerospace Power & Electronics...

  17. attitude control system: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Magnetic Solar Simulation Workshop 2004 Spacecraft control type Passive control - Gravity gradient control - Spin controlAerospace Power & Electronics...

  18. attitude control method: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Magnetic Solar Simulation Workshop 2004 Spacecraft control type Passive control - Gravity gradient control - Spin controlAerospace Power & Electronics...

  19. attitude controlling system: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Magnetic Solar Simulation Workshop 2004 Spacecraft control type Passive control - Gravity gradient control - Spin controlAerospace Power & Electronics...

  20. Automatic On-line Controller for Coordinated Slow Voltage Control

    E-Print Network [OSTI]

    Venkatasubramanian, Mani V.

    are operated in an "aligned" operation. In modern power systems, as the system gets loaded more and more, reactor banks and LTC transformers. The project pursues a model-based approach for selecting the discrete switching cost. A robust control strategy is proposed to make the control feasible and optimal for a set

  1. EXPERT CONTROL BASED ON NEURAL NETWORKS FOR CONTROLLING

    E-Print Network [OSTI]

    in Agriculture III Springer (Ed.) (2012) 126-132" DOI : 10.1007/978-3-642-12220-0_20 #12;2 Le Du The main purpose by achieving adequate temperature integrals while reducing pollution and energy consumption. 0 5 10 15 20 25 30 system for plant growth, the key problems include control system input so called set point and control

  2. Controlling Data in the Cloud: Outsourcing Computation without Outsourcing Control

    E-Print Network [OSTI]

    Controlling Data in the Cloud: Outsourcing Computation without Outsourcing Control Richard Chow.fujitsu.com ABSTRACT Cloud computing is clearly one of today's most enticing technology areas due, at least in part, there are significant, persistent concerns about cloud computing that are impeding momentum and will eventually

  3. Feedback Control of the Sawtooth Period through Real Time Control of the Ion Cyclotron Resonance Frequency

    E-Print Network [OSTI]

    Feedback Control of the Sawtooth Period through Real Time Control of the Ion Cyclotron Resonance Frequency

  4. Northeast Energy Efficiency Partnerships: Advanced Lighting Controls...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Northeast Energy Efficiency Partnerships: Advanced Lighting Controls - 2015 Peer Review Northeast Energy Efficiency Partnerships: Advanced Lighting Controls - 2015 Peer Review...

  5. Rethinking optimal control of human movements

    E-Print Network [OSTI]

    Huh, Dongsung

    2012-01-01T23:59:59.000Z

    1971). “Optimal stochastic control of linear systems with1967). “Optimal stationary control of a linear systems with

  6. Controlled Hydrogen Fleet and Infrastructure Demonstration and...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Controlled Hydrogen Fleet and Infrastructure Demonstration and Validation Project Solicitation Controlled Hydrogen Fleet and Infrastructure Demonstration and Validation Project...

  7. Controlled Hydrogen Fleet and Infrastructure Demonstration and...

    Office of Environmental Management (EM)

    Controlled Hydrogen Fleet and Infrastructure Demonstration and Validation Project Controlled Hydrogen Fleet and Infrastructure Demonstration and Validation Project 2009 DOE...

  8. Environmental Technology Verification of Mobile Sources Control...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Environmental Technology Verification of Mobile Sources Control Technologies Environmental Technology Verification of Mobile Sources Control Technologies 2005 Diesel Engine...

  9. Control and Intelligent Systems, Vol. 33, No. 3, 2005 DECENTRALIZED FLIGHT CONTROL

    E-Print Network [OSTI]

    Liu, Hugh H.T.

    Control and Intelligent Systems, Vol. 33, No. 3, 2005 DECENTRALIZED FLIGHT CONTROL INTEGRATION- tation, and is well fitted into a systematic flight control systems development and engineering process Words Decentralized control, control integration, performance analysis 1. Introduction Modern flight

  10. Fault tolerant control allocation in systems with fixed magnitude discrete controls 

    E-Print Network [OSTI]

    Marwaha, Monika

    2009-05-15T23:59:59.000Z

    as discrete controls. However, discrete controls constitute a different class of problems than proportional controls as they can take only binary values, unlike proportional controls which can take many values. Two nonlinear control laws based on Structured...

  11. A hierarchal multilevel microprocessor control system

    E-Print Network [OSTI]

    Teverbaugh, Larry D

    1979-01-01T23:59:59.000Z

    architectural configurations of distributed systems are examined for their usefulness in process control. An implementation of a distributed control system was undertaken in an effort to investigate the problems associated with multiprocessor architectures. A... OF THE DEVELOPMENT AND APPLICATION OF MICROPROCESSOR TECHNOLOGY. PROCESS CONTROL AND THE COMPUTER Page Process Control Fundamentals Digital Control Systems. Centralized Computing. Distributed Systems. Distributed Control System Architecture. Star...

  12. Plasma Control on Existing Devices Experience Gained

    E-Print Network [OSTI]

    of equilibrium control through to today - modelling Emerging pattern Outstanding issues Sorry, no citations to control It can be the full model of the thing to control It can be a linearised model of the thing to control It can be a simplistic model of the thing to control Physical system Measurements Controller

  13. Control Theory Reading and Communication Club

    E-Print Network [OSTI]

    Edinburgh, University of

    . Offers a very powerful tool for linear system analysis and controller synthesis. #12;Time Domain Essentials Design Objectives of a Control System Feedback State Estimation Identification and Adaptive Control Optimal Control A General Controller Structure Bibliography #12;What is Control? Sensing

  14. DOE standard: Radiological control

    SciTech Connect (OSTI)

    Not Available

    1999-07-01T23:59:59.000Z

    The Department of Energy (DOE) has developed this Standard to assist line managers in meeting their responsibilities for implementing occupational radiological control programs. DOE has established regulatory requirements for occupational radiation protection in Title 10 of the Code of Federal Regulations, Part 835 (10 CFR 835), ``Occupational Radiation Protection``. Failure to comply with these requirements may lead to appropriate enforcement actions as authorized under the Price Anderson Act Amendments (PAAA). While this Standard does not establish requirements, it does restate, paraphrase, or cite many (but not all) of the requirements of 10 CFR 835 and related documents (e.g., occupational safety and health, hazardous materials transportation, and environmental protection standards). Because of the wide range of activities undertaken by DOE and the varying requirements affecting these activities, DOE does not believe that it would be practical or useful to identify and reproduce the entire range of health and safety requirements in this Standard and therefore has not done so. In all cases, DOE cautions the user to review any underlying regulatory and contractual requirements and the primary guidance documents in their original context to ensure that the site program is adequate to ensure continuing compliance with the applicable requirements. To assist its operating entities in achieving and maintaining compliance with the requirements of 10 CFR 835, DOE has established its primary regulatory guidance in the DOE G 441.1 series of Guides. This Standard supplements the DOE G 441.1 series of Guides and serves as a secondary source of guidance for achieving compliance with 10 CFR 835.

  15. Export Control Overview and Update

    E-Print Network [OSTI]

    Wood, Marcelo A.

    Export Control Overview and Update Marci Copeland, Export Control Officer #12;US Export Laws #12 items including equipment, materials, software & technology is export restricted Licensing can impact research timeline Certain imports/exports may be detained or seized by Customs in the US or in other

  16. Dual control active superconductive devices

    DOE Patents [OSTI]

    Martens, Jon S. (Albuquerque, NM); Beyer, James B. (Madison, WI); Nordman, James E. (Madison, WI); Hohenwarter, Gert K. G. (Madison, WI)

    1993-07-20T23:59:59.000Z

    A superconducting active device has dual control inputs and is constructed such that the output of the device is effectively a linear mix of the two input signals. The device is formed of a film of superconducting material on a substrate and has two main conduction channels, each of which includes a weak link region. A first control line extends adjacent to the weak link region in the first channel and a second control line extends adjacent to the weak link region in the second channel. The current flowing from the first channel flows through an internal control line which is also adjacent to the weak link region of the second channel. The weak link regions comprise small links of superconductor, separated by voids, through which the current flows in each channel. Current passed through the control lines causes magnetic flux vortices which propagate across the weak link regions and control the resistance of these regions. The output of the device taken across the input to the main channels and the output of the second main channel and the internal control line will constitute essentially a linear mix of the two input signals imposed on the two control lines. The device is especially suited to microwave applications since it has very low input capacitance, and is well suited to being formed of high temperature superconducting materials since all of the structures may be formed coplanar with one another on a substrate.

  17. Proceedings: 2000 NOx Controls Workshop

    SciTech Connect (OSTI)

    None

    2001-04-01T23:59:59.000Z

    The 2000 EPRI workshop on nitrogen oxide (NOx) controls for utility boilers provided a medium for member utilities to augment their knowledge of recent operating experience and developments on NOx control technologies. The event focused on improving methods of compliance with emission regulations mandated by the Clean Air Act Amendments (CAAA) of 1990 without jeopardizing efficiency and plant performance.

  18. AIAA 20030185 Aerodynamically Controlled Expansion

    E-Print Network [OSTI]

    Texas at Arlington, University of

    undesirable over-expansion in generalized supersonic nozzle flows. Nomenclature A cross-sectional area fgAIAA 2003­0185 Aerodynamically Controlled Expansion Nozzle for STOVL Aircraft D.A. Terrier Lockheed Controlled Expansion Nozzle for STOVL Aircraft Douglas A. Terrier* Lockheed Martin Aeronautics Company, Fort

  19. Virtual Control Systems Environment (VCSE)

    SciTech Connect (OSTI)

    Atkins, Will

    2012-10-08T23:59:59.000Z

    Will Atkins, a Sandia National Laboratories computer engineer discusses cybersecurity research work for process control systems. Will explains his work on the Virtual Control Systems Environment project to develop a modeling and simulation framework of the U.S. electric grid in order to study and mitigate possible cyberattacks on infrastructure.

  20. SRS control system upgrade requirements

    SciTech Connect (OSTI)

    Hill, L.F.

    1998-08-04T23:59:59.000Z

    This document defines requirements for an upgrade of the Sodium Removal System (SRS) control system. The upgrade is being performed to solve a number of maintainability and operability issues. The upgraded system will provide the same functions, controls and interlocks as the present system, and in addition provide enhanced functionality in areas discussed in this document.

  1. PERFORMANCE ASSESSMENT OF PID CONTROLLERS

    E-Print Network [OSTI]

    Marquez, Horacio J.

    PERFORMANCE ASSESSMENT OF PID CONTROLLERS W. Tan, H. J. Marquez, and T. Chen§ Abstract: Criteria based on disturbance rejection and system robustness are proposed to assess the performance of PID-loop or multi-loop. Key Words: PID Control; Tuning; Performance; Robustness; Structured Singular Value. 1

  2. Virtual Control Systems Environment (VCSE)

    ScienceCinema (OSTI)

    Atkins, Will

    2014-02-26T23:59:59.000Z

    Will Atkins, a Sandia National Laboratories computer engineer discusses cybersecurity research work for process control systems. Will explains his work on the Virtual Control Systems Environment project to develop a modeling and simulation framework of the U.S. electric grid in order to study and mitigate possible cyberattacks on infrastructure.

  3. Aquatic Plant Control Research Program

    E-Print Network [OSTI]

    US Army Corps of Engineers

    -1 June 2012 Development of an Integrated Pest Management Approach for Controlling Giant Salvinia Using approach for developing integrated pest management (IPM) techniques and pro- cedures to control by infestations in Toledo Bend Reservoir in 1998 (Owens et al. 2004). By 2004, giant salvinia was reported in four

  4. EXCEPTIONS TO IGNITION SOURCE CONTROLS

    SciTech Connect (OSTI)

    SCHLOSSER, R.L.

    2003-09-25T23:59:59.000Z

    This document provides a basis for acceptance of risks associated with equipment and materials that do not fully comply with the ignition source controls as they are applied by the Technical Safety Requirements prepared to implement the controls required by the documented safety analysis for tank farms facilities.

  5. Reactor control rod timing system

    DOE Patents [OSTI]

    Wu, Peter T. K. (Clifton Park, NY)

    1982-01-01T23:59:59.000Z

    A fluid driven jet-edge whistle timing system for control rods of a nuclear reactor for producing real-time detection of the timing of each control rod in its scram operation. An important parameter in reactor safety, particularly for liquid metal fast breeder reactors (LMFBR), is the time deviation between the time the control rod is released and the time the rod actually reaches the down position. The whistle has a nearly pure tone signal with center frequency (above 100 kHz) far above the frequency band in which the energy of the background noise is concentrated. Each control rod can be fitted with a whistle with a different frequency so that there is no ambiguity in differentiating the signal from each control rod.

  6. Reactor control rod timing system

    SciTech Connect (OSTI)

    Wu, P.T.

    1982-02-09T23:59:59.000Z

    A fluid driven jet-edge whistle timing system for control rods of a nuclear reactor for producing real-time detection of the timing of each control rod in its scram operation. An important parameter in reactor safety, particularly for liquid metal fast breeder reactors (LMFBR), is the time deviation between the time the control rod is released and the time the rod actually reaches the down position. The whistle has a nearly pure tone signal with center frequency (Above 100 kHz) far above the frequency band in which the energy of the background noise is concentrated. Each control rod can be fitted with a whistle with a different frequency so that there is no ambiguity in differentiating the signal from each control rod.

  7. SOWFA + Super Controller User's Manual

    SciTech Connect (OSTI)

    Fleming, P.; Gebraad, P.; Churchfield, M.; Lee, S.; Johnson, K.; Michalakes, J.; van Wingerden, J. W.; Moriarty, P.

    2013-08-01T23:59:59.000Z

    SOWFA + Super Controller is a modification of the NREL's SOWFA tool which allows for a user to apply multiturbine or centralized wind plant control algorithms within the high-fidelity SOWFA simulation environment. The tool is currently a branch of the main SOWFA program, but will one day will be merged into a single version. This manual introduces the tool and provides examples such that a user can implement their own super controller and set up and run simulations. The manual only discusses enough about SOWFA itself to allow for the customization of controllers and running of simulations, and details of SOWFA itself are reported elsewhere Churchfield and Lee (2013); Churchfield et al. (2012). SOWFA + Super Controller, and this manual, are in alpha mode.

  8. NIST Special Publication 800-82 Guide to Industrial Control

    E-Print Network [OSTI]

    Supervisory Control and Data Acquisition (SCADA) Systems, Distributed Control Systems (DCS), and Other Control to Industrial Control Systems (ICS) Security Supervisory Control and Data Acquisition (SCADA) systems

  9. I/O impedance controller

    DOE Patents [OSTI]

    Ruesch, Rodney; Jenkins, Philip N.; Ma, Nan

    2004-03-09T23:59:59.000Z

    There is disclosed apparatus and apparatus for impedance control to provide for controlling the impedance of a communication circuit using an all-digital impedance control circuit wherein one or more control bits are used to tune the output impedance. In one example embodiment, the impedance control circuit is fabricated using circuit components found in a standard macro library of a computer aided design system. According to another example embodiment, there is provided a control for an output driver on an integrated circuit ("IC") device to provide for forming a resistor divider network with the output driver and a resistor off the IC device so that the divider network produces an output voltage, comparing the output voltage of the divider network with a reference voltage, and adjusting the output impedance of the output driver to attempt to match the output voltage of the divider network and the reference voltage. Also disclosed is over-sampling the divider network voltage, storing the results of the over sampling, repeating the over-sampling and storing, averaging the results of multiple over sampling operations, controlling the impedance with a plurality of bits forming a word, and updating the value of the word by only one least significant bit at a time.

  10. A fuzzy logic controller for autonomous vehicle control

    E-Print Network [OSTI]

    Vinson, Yale Patrick

    1995-01-01T23:59:59.000Z

    This thesis presents a feasibility study for the use of fuzzy logic control to solve the autonomous vehicle following problem. After developing the original vehicle following system, the applicability of fuzzy logic to the problem is demonstrated...

  11. A fuzzy logic controller for autonomous vehicle control 

    E-Print Network [OSTI]

    Vinson, Yale Patrick

    1995-01-01T23:59:59.000Z

    This thesis presents a feasibility study for the use of fuzzy logic control to solve the autonomous vehicle following problem. After developing the original vehicle following system, the applicability of fuzzy logic to the problem is demonstrated...

  12. Stochastic Control of Metabolic Pathways

    E-Print Network [OSTI]

    Andrea Rocco

    2009-06-01T23:59:59.000Z

    We study the effect of extrinsic noise in metabolic networks. We introduce external random fluctuations at the kinetic level, and show how these lead to a stochastic generalization of standard Metabolic Control Analysis. While Summation and Connectivity Theorems hold true in presence of extrinsic noise, control coefficients incorporate its effect through an explicit dependency on the noise intensity. New elasticities and response coefficients are also defined. Accordingly, the concept of control by noise is introduced as a way of tuning the systemic behaviour of metabolisms. We argue that this framework holds for intrinsic noise too, when time-scale separation is present in the system.

  13. Efficient control of accelerator maps

    E-Print Network [OSTI]

    Jehan Boreux; Timoteo Carletti; Charalampos Skokos; Yannis Papaphilippou; Michel Vittot

    2011-09-21T23:59:59.000Z

    Recently, the Hamiltonian Control Theory was used in [Boreux et al.] to increase the dynamic aperture of a ring particle accelerator having a localized thin sextupole magnet. In this letter, these results are extended by proving that a simplified version of the obtained general control term leads to significant improvements of the dynamic aperture of the uncontrolled model. In addition, the dynamics of flat beams based on the same accelerator model can be significantly improved by a reduced controlled term applied in only 1 degree of freedom.

  14. Subsea control and data acquisition

    SciTech Connect (OSTI)

    Not Available

    1990-01-01T23:59:59.000Z

    This book contains papers presented at the conference on subsea control and data acquisition. The tasks performed by subsea control systems, although fairly straightforward, are dominated by an alien environment and the high costs associated with failure and repair. The evolution of systems design has resulted in a growing confidence in equipment reliability. In the future, however, more searching demands may include active regulation of valves and the use of data for reservoir management purposes. The emphasis of the papers is on technical depth and understanding, with particular attention being paid to the science control and data monitoring in relation to the task of hydrocarbon recovery.

  15. Distributed PI-Control with Applications to Power Systems Frequency Control

    E-Print Network [OSTI]

    Dimarogonas, Dimos

    and decentralized control. In a distributed control architecture, there is no centralized controller with global. In a decentralized control architecture however, there is no communication between the individual controllersDistributed PI-Control with Applications to Power Systems Frequency Control Martin Andreasson12

  16. Topology based global crowd control 

    E-Print Network [OSTI]

    Barnett, Adam

    2014-11-27T23:59:59.000Z

    We propose a method to determine the flow of large crowds of agents in a scene such that it is filled to its capacity with a coordinated, dynamically moving crowd. Our approach provides a focus on cooperative control ...

  17. Advanced gray rod control assembly

    DOE Patents [OSTI]

    Drudy, Keith J; Carlson, William R; Conner, Michael E; Goldenfield, Mark; Hone, Michael J; Long, Jr., Carroll J; Parkinson, Jerod; Pomirleanu, Radu O

    2013-09-17T23:59:59.000Z

    An advanced gray rod control assembly (GRCA) for a nuclear reactor. The GRCA provides controlled insertion of gray rod assemblies into the reactor, thereby controlling the rate of power produced by the reactor and providing reactivity control at full power. Each gray rod assembly includes an elongated tubular member, a primary neutron-absorber disposed within the tubular member said neutron-absorber comprising an absorber material, preferably tungsten, having a 2200 m/s neutron absorption microscopic capture cross-section of from 10 to 30 barns. An internal support tube can be positioned between the primary absorber and the tubular member as a secondary absorber to enhance neutron absorption, absorber depletion, assembly weight, and assembly heat transfer characteristics.

  18. Louisiana Air Control Law (Louisiana)

    Broader source: Energy.gov [DOE]

    This law states regulations for air quality control and states the powers and duties of the secretary of environmental quality. It provides information about permits and licenses, air quality...

  19. Nuclear Material Control and Accountability

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2005-08-26T23:59:59.000Z

    The manual establishes a program for the control and accountability of nuclear materials within the Department of Energy. Cancels: DOE M 474.1-1B DOE M 474.1-2A

  20. Nuclear Material Control and Accountability

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2005-08-26T23:59:59.000Z

    The manual establishes a program for the control and accountability of nuclear materials within the Department of Energy. Chg 1, dated 8-14-06. Canceled by DOE O 474.2.

  1. Automotive Power Generation and Control

    E-Print Network [OSTI]

    Caliskan, Vahe

    This paper describes some new developments in the application of power electronics to automotive power generation and control. A new load-matching technique is introduced that uses a simple switched-mode rectifier to achieve ...

  2. Modeling and Control Interactive Networks

    E-Print Network [OSTI]

    Amin, S. Massoud

    Modeling and Control of Complex Interactive Networks By Massoud Amin E nergy, telecommunications complex networks, geographi- cally dispersed, nonlinear, and interacting both among themselves, distributed, highly interactive networks, nor does any such entity have the ability to evaluate, monitor

  3. Pollution Control Act (South Carolina)

    Broader source: Energy.gov [DOE]

    This Act declares the maintenance of reasonable standards of purity of air and water to be the public policy of the state. The Act authorizes the Department of Health and Environmental Control to...

  4. Optimal Control of Distillation Systems

    E-Print Network [OSTI]

    Chatterjee, N.; Suchdeo, S. R.

    1984-01-01T23:59:59.000Z

    The optimum performance of a distillation system can be evaluated by examining the product purities, the product recoveries, and the system's capability to respond to small or large, expected or unexpected, plant disturbances. An optimal control...

  5. Underground Injection Control (West Virginia)

    Broader source: Energy.gov [DOE]

    This rule set forth criteria and standards for the requirements which apply to the State Underground Injection Control Program (U.I.C.). The UIC permit program regulates underground injections by...

  6. Controlling acid rain : policy issues

    E-Print Network [OSTI]

    Fay, James A.

    1983-01-01T23:59:59.000Z

    The policy and regulatory ramifications of U.S. acid rain control programs are examined; particularly, the alternative of a receptor-oriented strategy as constrasted to emission-oriented proposals (e.g., the Mitchell bill) ...

  7. Georgia Radiation Control Act (Georgia)

    Broader source: Energy.gov [DOE]

    The Georgia Radiation Control Act is designed to prevent any associated harmful effects upon the environment or the health and safety of the public through the institution and maintenance of a...

  8. Seasonalepisodic control of acid deposition

    E-Print Network [OSTI]

    Fay, James A.

    1988-01-01T23:59:59.000Z

    This report contains the climatological, technical and economic factors for episodic and seasonal control of emissions in existing power plants. Analyzing a large data set of acid deposition for the years 1982-85, we find ...

  9. Model prediction for reactor control

    SciTech Connect (OSTI)

    Ardell, G.G.; Gumowski, B.

    1983-06-01T23:59:59.000Z

    Model prediction is offered as a substitute to lengthy analysis of sample procedures to control product properties not amendable to direct measurement during chemical processing. A computer model of a reactor is set up, and control actions, based on current predicted values, are established. The control is based on predicted ''measurements'' which are derived using a dynamic process model solved on-line. The model is corrected by real measurements in the process operation. A two phase exothermic catalyzed reaction, with the objective of producing material with specified properties, is tested in this paper. The model prediction performance was very good. Model systems enable a more effective control to be exercised than the sample method.

  10. Montana Radon Control Act (Montana)

    Broader source: Energy.gov [DOE]

    The Radon Control Act regulates the emission of radon, the gaseous decay products of uranium or thorium. The Act addresses operator certification of radon-producing facilities, testing and...

  11. Computerized Control of Environmental Systems 

    E-Print Network [OSTI]

    Gatti, F. L.

    1980-01-01T23:59:59.000Z

    . Optimized conditions for products, people im prove moral, decrease waste. Automatic monitoring of systems parameters. Metering of utilities. Boiler controls Alternate energy source allocation. 2.0 OPERATING SYSTEMS PROVE PRACTICAL WHEN MEASURED...

  12. Municipal Water Pollution Control (Minnesota)

    Broader source: Energy.gov [DOE]

    This statute applies to a city, sanitary district, or other governmental subdivision or public corporation. The statute gives the Pollution Control Agency the authority to prepare and enforce a...

  13. Texas Poultry Pest Control Practices

    E-Print Network [OSTI]

    Hall, Kent D.; Holloway, Rodney L.; Carey, John B.; Hoelscher, Clifford E.

    1999-06-01T23:59:59.000Z

    A 1996 survey of 242 Texas poultry operators found that fire ants and darling beetles have emerged as major pests in the industry. Survey results included types of poultry operations, pests, control methods and needs, and differences in operations...

  14. Dynamic control of remelting processes

    DOE Patents [OSTI]

    Bertram, Lee A. (Dublin, CA); Williamson, Rodney L. (Albuquerque, NM); Melgaard, David K. (Albuquerque, NM); Beaman, Joseph J. (Austin, TX); Evans, David G. (Clinton, NY)

    2000-01-01T23:59:59.000Z

    An apparatus and method of controlling a remelting process by providing measured process variable values to a process controller; estimating process variable values using a process model of a remelting process; and outputting estimated process variable values from the process controller. Feedback and feedforward control devices receive the estimated process variable values and adjust inputs to the remelting process. Electrode weight, electrode mass, electrode gap, process current, process voltage, electrode position, electrode temperature, electrode thermal boundary layer thickness, electrode velocity, electrode acceleration, slag temperature, melting efficiency, cooling water temperature, cooling water flow rate, crucible temperature profile, slag skin temperature, and/or drip short events are employed, as are parameters representing physical constraints of electroslag remelting or vacuum arc remelting, as applicable.

  15. Optimal Control of Inhomogeneous Ensembles

    E-Print Network [OSTI]

    Justin Ruths; Jr-Shin Li

    2011-02-17T23:59:59.000Z

    Inhomogeneity, in its many forms, appears frequently in practical physical systems. Readily apparent in quantum systems, inhomogeneity is caused by hardware imperfections, measurement inaccuracies, and environmental variations, and subsequently limits the performance and efficiency achievable in current experiments. In this paper, we provide a systematic methodology to mathematically characterize and optimally manipulate inhomogeneous ensembles with concepts taken from ensemble control. In particular, we develop a computational method to solve practical quantum pulse design problems cast as optimal ensemble control problems, based on multidimensional pseudospectral approximations. We motivate the utility of this method by designing pulses for both standard and novel applications. We also show the convergence of the pseudospectral method for optimal ensemble control. The concepts developed here are applicable beyond quantum control, such as to neuron systems, and furthermore to systems with by parameter uncertainty, which pervade all areas of science and engineering.

  16. Quadratic control of quantum processes

    E-Print Network [OSTI]

    Luigi Accardi; Andreas Boukas

    2013-08-07T23:59:59.000Z

    Within the framework of the Accardi-Fagnola-Quaegebeur (AFQ) representation free calculus of \\cite{b}, we consider the problem of controlling the size of a quantum stochastic flow generated by a unitary stochastic evolution affected by quantum noise. In the case when the evolution is driven by first order white noise (which includes quantum Brownian motion) the control is shown to be given in terms of the solution of an algebraic Riccati equation. This is done by first solving the problem of controlling (by minimizing an associated quadratic performance criterion) a stochastic process whose evolution is described by a stochastic differential equation of the type considerd in \\cite{b}. The solution is given as a feedback control law in terms of the solution of a stochastic Riccati equation.

  17. Optimal Control of Quantum Measurement

    E-Print Network [OSTI]

    Daniel J. Egger; Frank K. Wilhelm

    2014-08-26T23:59:59.000Z

    Pulses to steer the time evolution of quantum systems can be designed with optimal control theory. In most cases it is the coherent processes that can be controlled and one optimizes the time evolution towards a target unitary process, sometimes also in the presence of non-controllable incoherent processes. Here we show how to extend the GRAPE algorithm in the case where the incoherent processes are controllable and the target time evolution is a non-unitary quantum channel. We perform a gradient search on a fidelity measure based on Choi matrices. We illustrate our algorithm by optimizing a phase qubit measurement pulse. We show how this technique can lead to large measurement contrast close to 99%. We also show, within the validity of our model, that this algorithm can produce short 1.4 ns pulses with 98.2% contrast.

  18. Water Pollution Control Authority (Alabama)

    Broader source: Energy.gov [DOE]

    The Water Pollution Control Revolving Loan Fund, is maintained in perpetuity and operated by the department as agent for the authority for the purposes stated herein. Grants from the federal...

  19. Electrotechnologies and Industrial Pollution Control

    E-Print Network [OSTI]

    Schmidt, P. S.

    The role of electrotechnologies in the control of emissions and effluents from industrial processes is discussed. Matrices are presented identifying those electrotechnologies which impact pollution in various industries. Specific examples...

  20. Measurement Control Workshop Instructional Materials

    SciTech Connect (OSTI)

    Gibbs, Philip [Brookhaven National Lab. (BNL), Upton, NY (United States); Crawford, Cary [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); McGinnis, Brent [Pacific Northwest National Lab. (PNNL), Richland, WA (United States) and Insolves LLC

    2014-04-01T23:59:59.000Z

    A workshop to teach the essential elements of an effective nuclear materials control and accountability (MC&A) programs are outlined, along with the modes of Instruction, and the roles and responsibilities of participants in the workshop.

  1. Building load control and optimization

    E-Print Network [OSTI]

    Xing, Hai-Yun Helen, 1976-

    2004-01-01T23:59:59.000Z

    Researchers and practitioners have proposed a variety of solutions to reduce electricity consumption and curtail peak demand. This research focuses on load control by improving the operations in existing building HVAC ...

  2. Adaptive control of hypersonic vehicles

    E-Print Network [OSTI]

    Gibson, Travis Eli

    2008-01-01T23:59:59.000Z

    The guidance, navigation and control of hypersonic vehicles are highly challenging tasks due to the fact that the dynamics of the airframe, propulsion system and structure are integrated and highly interactive. Such a ...

  3. Georgia Waste Control Law (Georgia)

    Broader source: Energy.gov [DOE]

    The Waste Control Law makes it unlawful to dump waste in any lakes, streams or surfaces waters of the State or on any private property without consent of the property owner. Waste is very broadly...

  4. Exceptions to ignition source controls

    SciTech Connect (OSTI)

    SCHLOSSER, R.L.

    2003-03-01T23:59:59.000Z

    This document provides a basis for acceptance of risks associated with equipment that does not fully comply with the ignition source control requirements as they will be applied by the Technical Safety Requirements prepared to implement the documented safety analysis.

  5. Cardiovascular & Respiratory Modeling, Analysis & Control

    E-Print Network [OSTI]

    Batzel, Jerry

    Problem . . . . . . . . . . . . . 23 1.5 The Bicycle Ergometer Test­ eter identification problem . . . . . . . . . . . . . . 30 1.7 Numerical Results . . . . . . . . . . . . 47 2.1.2 The chemical control system for ventilation . . . . . 48 2.1.3 Structural features

  6. Repetitive and Iterative Learning Control for Power Converter and Precision Motion Control

    E-Print Network [OSTI]

    Teng, Kuo-Tai

    2014-01-01T23:59:59.000Z

    3 Repetitive Control of Power Inverter for Harmonic4 Repetitive Control of Power Rectifier for HarmonicThe typical PI controlled power converters can not guarantee

  7. Red Rice Research and Control

    E-Print Network [OSTI]

    Baker, John B.; Baldwin, Ford L.; Bourgeois, W.J.; Cox, Clodis H.; Craigmiles, Julian P.; Dishman, William D.; Eastin, E. Ford; Helpert, Charles W.; Hill, Lewis C.; Huey, Bobby A.; Klosterboer, Arlen D.; Sonnier, Earl A.

    1980-01-01T23:59:59.000Z

    ...................................... 10 E. A. Sonnier RED RICE CONTROL IN ALTERNATE CROPS ................................ 16 F. L. Baldwin ..# RED RICE CONTROL ..................................................lg B. A. Huey and F. L. Baldwin RED RICE HERBICIDE SCREENING TESTS...-to-date information available on a subject of major concern to rice producers. E. F. Eastin, editor The Texas Agricultural Experiment Station Beaumont INTRODUCTION J. P. Craigmiles The purpose of t h i s red r i c e symposium i s straightforward and simple...

  8. Feedback control of spin systems

    E-Print Network [OSTI]

    Claudio Altafini

    2006-01-03T23:59:59.000Z

    The feedback stabilization problem for ensembles of coupled spin 1/2 systems is discussed from a control theoretic perspective. The noninvasive nature of the bulk measurement allows for a fully unitary and deterministic closed loop. The Lyapunov-based feedback design presented does not require spins that are selectively addressable. With this method, it is possible to obtain control inputs also for difficult tasks, like suppressing undesired couplings in identical spin systems.

  9. Superheat Control: A Hybrid Approach

    E-Print Network [OSTI]

    Elliot, M.S.; Rasmussen, B.P.; Walton, Z.; Bolding, B.

    temperature. This is generally referred to as 5°C (9°F) of superheat. The metering of refrigerant in air conditioning, refrigeration, or heat-pump systems is gener- ally achieved by a number of different valve types, which vary in expense and design sophistica.... The proposed valve has the potential for widespread use throughout the air-conditioning, refrigeration, and heat-pump industry as an alternative to other actively controlled valves, while preserving sufficient flexibility to allow for passive flow control...

  10. AQUATIC PLANT CONTROL RESEARCH PROGRAM

    E-Print Network [OSTI]

    US Army Corps of Engineers

    , including 90 percent of the tubers, using a dredge capable of pumping 800 to 1,100 gal/min. Estimated cost OF THE DIVER-OPERATED DREDGE AND BOTTOM-COVERING MATERIALS FOR CONTROL OF HYDRJLLA IN THE POTOMAC RIVER-Operated Dredge and Bottom-Covering Materials for Control of Hydrilla in the Potomac River 12·l(fl~NAL AUT1ROR

  11. Computer Control of Unattended Plants

    E-Print Network [OSTI]

    Vinson, D. R.; Chatterjee, N.

    1984-01-01T23:59:59.000Z

    COMPUTER CONTROL OF UNATTENDED PLANTS David R. Vinson, Nirma1 Chatterjee ? Ai r Products and Chemi ca 1s, Inc. Allentown, Pennsylvania Providing a cost-effective and reliable computer monitori ng, control, and optimization package is a greater... the last decade, energy costs in some air separation plants are now more than half the total product cost. Starting in 1975, Air Products and Chemicals, Inc. began implementing a program to retrofit existing major energy consuming facili ties...

  12. Anticipatory control of turbine generators

    E-Print Network [OSTI]

    Messec, Freddie Laurel

    1971-01-01T23:59:59.000Z

    of Turbine Generators. (Nay 1971) Freddie Laurel Nessec, B. S. E. E, , Texas Tech University; Directed by: Professor J. S . Denison An investigation is made of the use of predicted loads in controlling turbine generators. A perturbation model of a turbine... 3. Relational diagram of a turbine generator. Speed governor system. Static speed-load characteristic of a speed governor system. Block diagram of model. Frequency response to step load change. Block diagram of model with integral control...

  13. Nuclear reactor control room construction

    DOE Patents [OSTI]

    Lamuro, R.C.; Orr, R.

    1993-11-16T23:59:59.000Z

    A control room for a nuclear plant is disclosed. In the control room, objects labelled 12, 20, 22, 26, 30 in the drawing are no less than four inches from walls labelled 10.2. A ceiling contains cooling fins that extend downwards toward the floor from metal plates. A concrete slab is poured over the plates. Studs are welded to the plates and are encased in the concrete. 6 figures.

  14. Nuclear reactor control room construction

    DOE Patents [OSTI]

    Lamuro, Robert C. (Pittsburgh, PA); Orr, Richard (Pittsburgh, PA)

    1993-01-01T23:59:59.000Z

    A control room 10 for a nuclear plant is disclosed. In the control room, objects 12, 20, 22, 26, 30 are no less than four inches from walls 10.2. A ceiling 32 contains cooling fins 35 that extend downwards toward the floor from metal plates 34. A concrete slab 33 is poured over the plates. Studs 36 are welded to the plates and are encased in the concrete.

  15. Management Controls for Large Ranches.

    E-Print Network [OSTI]

    Maddox, L. A. Jr.

    1975-01-01T23:59:59.000Z

    control records can help make some decisions more accurately. Other problems still require a cowman's "sixth sense'' until better measures of prociuctivity and quality control are developed. A modern and scientific approach can be de- veloped... and corpora- tions with investments in ranching operations are looking for practical records and summaries to help in making decisions affecting future ranching oper- ations. Consider the following record and summary forms. Not all are necessary for some...

  16. Management Controls for Small Ranches.

    E-Print Network [OSTI]

    Maddox, L. A. Jr.

    1974-01-01T23:59:59.000Z

    to operate their cattle business as efficiently as possible. Pro- duction, quality and cost control records can be assembled to help make decisions more accu- rately. Some problems still require a cowman's "sixth sense" until better measures... of productivity and quality control are developed. Many small cow-calf operators are looking for practical records and summaries that will help them 'Extensioti beef cattle specialist, The Texas A&M University System. make decisions affecting the future...

  17. LiquichekTM Diabetes Control

    E-Print Network [OSTI]

    Rodriguez, Carlos

    LiquichekTM Diabetes Control Bio-Rad Laboratories D I A B E T E S / H E M O G L O B I N C O N T R O L S #12;LiquichekTM Diabetes Control Hemoglobin A1C Hemoglobin, Total A liquid human whole blood based product designed to monitor the performance of hemoglobin tests associated with diabetes

  18. EXPORT CONTROLS: OVERVIEW & CHECKLIST FOR RESEARCHERS

    E-Print Network [OSTI]

    Mohanty, Saraju P.

    1 EXPORT CONTROLS: OVERVIEW & CHECKLIST FOR RESEARCHERS What are Export Controls? "Export Controls through its Export Administration Regulations (EAR), the U.S. Department of State through its of Foreign Assets Control (OFAC). The export control laws and regulations have several purposes: to restrict

  19. CUNY EXPORT CONTROL PROCEDURES 13. Sponsored Research

    E-Print Network [OSTI]

    Rosen, Jay

    CUNY EXPORT CONTROL PROCEDURES 13. Sponsored Research This Section addresses the export control or contract contains or triggers export control restrictions. In general, CUNY does not accept restrictions with regard to export controls or the control implication of a particular clause or set of clauses may

  20. OPTIMAL CONTROL WITH ADAPTIVE INTERNAL DYNAMICS MODELS

    E-Print Network [OSTI]

    Vijayakumar, Sethu

    . The optimal feedback control law for systems with non-linear dynamics and non-quadratic costs can be foundOPTIMAL CONTROL WITH ADAPTIVE INTERNAL DYNAMICS MODELS Djordje Mitrovic, Stefan Klanke, and Sethu, optimal control, adaptive control, robot simulation Abstract: Optimal feedback control has been proposed

  1. Advanced nuclear plant control complex

    DOE Patents [OSTI]

    Scarola, Kenneth (Windsor, CT); Jamison, David S. (Windsor, CT); Manazir, Richard M. (North Canton, CT); Rescorl, Robert L. (Vernon, CT); Harmon, Daryl L. (Enfield, CT)

    1993-01-01T23:59:59.000Z

    An advanced control room complex for a nuclear power plant, including a discrete indicator and alarm system (72) which is nuclear qualified for rapid response to changes in plant parameters and a component control system (64) which together provide a discrete monitoring and control capability at a panel (14-22, 26, 28) in the control room (10). A separate data processing system (70), which need not be nuclear qualified, provides integrated and overview information to the control room and to each panel, through CRTs (84) and a large, overhead integrated process status overview board (24). The discrete indicator and alarm system (72) and the data processing system (70) receive inputs from common plant sensors and validate the sensor outputs to arrive at a representative value of the parameter for use by the operator during both normal and accident conditions, thereby avoiding the need for him to assimilate data from each sensor individually. The integrated process status board (24) is at the apex of an information hierarchy that extends through four levels and provides access at each panel to the full display hierarchy. The control room panels are preferably of a modular construction, permitting the definition of inputs and outputs, the man machine interface, and the plant specific algorithms, to proceed in parallel with the fabrication of the panels, the installation of the equipment and the generic testing thereof.

  2. Optimal Control of Distributed Energy Resources using Model Predictive Control

    SciTech Connect (OSTI)

    Mayhorn, Ebony T.; Kalsi, Karanjit; Elizondo, Marcelo A.; Zhang, Wei; Lu, Shuai; Samaan, Nader A.; Butler-Purry, Karen

    2012-07-22T23:59:59.000Z

    In an isolated power system (rural microgrid), Distributed Energy Resources (DERs) such as renewable energy resources (wind, solar), energy storage and demand response can be used to complement fossil fueled generators. The uncertainty and variability due to high penetration of wind makes reliable system operations and controls challenging. In this paper, an optimal control strategy is proposed to coordinate energy storage and diesel generators to maximize wind penetration while maintaining system economics and normal operation. The problem is formulated as a multi-objective optimization problem with the goals of minimizing fuel costs and changes in power output of diesel generators, minimizing costs associated with low battery life of energy storage and maintaining system frequency at the nominal operating value. Two control modes are considered for controlling the energy storage to compensate either net load variability or wind variability. Model predictive control (MPC) is used to solve the aforementioned problem and the performance is compared to an open-loop look-ahead dispatch problem. Simulation studies using high and low wind profiles, as well as, different MPC prediction horizons demonstrate the efficacy of the closed-loop MPC in compensating for uncertainties in wind and demand.

  3. Integrated Transmission and Distribution Control

    SciTech Connect (OSTI)

    Kalsi, Karanjit; Fuller, Jason C.; Tuffner, Francis K.; Lian, Jianming; Zhang, Wei; Marinovici, Laurentiu D.; Fisher, Andrew R.; Chassin, Forrest S.; Hauer, Matthew L.

    2013-01-16T23:59:59.000Z

    Distributed, generation, demand response, distributed storage, smart appliances, electric vehicles and renewable energy resources are expected to play a key part in the transformation of the American power system. Control, coordination and compensation of these smart grid assets are inherently interlinked. Advanced control strategies to warrant large-scale penetration of distributed smart grid assets do not currently exist. While many of the smart grid technologies proposed involve assets being deployed at the distribution level, most of the significant benefits accrue at the transmission level. The development of advanced smart grid simulation tools, such as GridLAB-D, has led to a dramatic improvement in the models of smart grid assets available for design and evaluation of smart grid technology. However, one of the main challenges to quantifying the benefits of smart grid assets at the transmission level is the lack of tools and framework for integrating transmission and distribution technologies into a single simulation environment. Furthermore, given the size and complexity of the distribution system, it is crucial to be able to represent the behavior of distributed smart grid assets using reduced-order controllable models and to analyze their impacts on the bulk power system in terms of stability and reliability. The objectives of the project were to: • Develop a simulation environment for integrating transmission and distribution control, • Construct reduced-order controllable models for smart grid assets at the distribution level, • Design and validate closed-loop control strategies for distributed smart grid assets, and • Demonstrate impact of integrating thousands of smart grid assets under closed-loop control demand response strategies on the transmission system. More specifically, GridLAB-D, a distribution system tool, and PowerWorld, a transmission planning tool, are integrated into a single simulation environment. The integrated environment allows the load flow interactions between the bulk power system and end-use loads to be explicitly modeled. Power system interactions are modeled down to time intervals as short as 1-second. Another practical issue is that the size and complexity of typical distribution systems makes direct integration with transmission models computationally intractable. Hence, the focus of the next main task is to develop reduced-order controllable models for some of the smart grid assets. In particular, HVAC units, which are a type of Thermostatically Controlled Loads (TCLs), are considered. The reduced-order modeling approach can be extended to other smart grid assets, like water heaters, PVs and PHEVs. Closed-loop control strategies are designed for a population of HVAC units under realistic conditions. The proposed load controller is fully responsive and achieves the control objective without sacrificing the end-use performance. Finally, using the T&D simulation platform, the benefits to the bulk power system are demonstrated by controlling smart grid assets under different demand response closed-loop control strategies.

  4. Logical Control Theory Applied to Mechanical Arms

    E-Print Network [OSTI]

    Pankiewicz, Ronald Joseph

    A new control algorithm based upon Logical Control Theory is developed for mechanical manipulators. The controller uses discrete tesselations of state space and a finite set of fixed torques to regulate non-rehearsed ...

  5. Export Controls Compliance Division of Research

    E-Print Network [OSTI]

    Suzuki, Masatsugu

    Export Controls Compliance Division of Research of this document is to provide overall guidance on export control regulations and internal procedures information contained in their Export Control Compliance programs in the development of this document. #12

  6. Adaptive control for optimizing microalgae production

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Adaptive control for optimizing microalgae production Francis Mairet Rafael Mu for light-limited microalgae culture. This controller regulates the light absorption factor, defined productivity under day-night cycles. Keywords: Nonlinear controller, Microalgae, Optimization, Biomass

  7. Diploma Thesis Distributed Secondary Control in Microgrids

    E-Print Network [OSTI]

    Bullo, Francesco

    and Droop Control . . . . . . . . . . . . . . . 5 2.2 Notation and Geometric Definitions in AC networks . . . . . . . . . . . . . . . 8 2.5 Droop-Controlled Microgrid of loads and droop-controlled inverters. While the decentralized and proportional primary droop

  8. Feedback controller parameterizations for reinforcement learning

    E-Print Network [OSTI]

    Roberts, John William

    Reinforcement Learning offers a very general framework for learning controllers, but its effectiveness is closely tied to the controller parameterization used. Especially when learning feedback controllers for weakly stable ...

  9. Dynamic Nonprehensile Manipulation: Controllability, Planning, and Experiments

    E-Print Network [OSTI]

    Mason, Matthew T.

    Dynamic Nonprehensile Manipulation: Controllability, Planning, and Experiments Kevin M. Lynch 1 describes controllability, planning, and implementation of planar dynamic nonpre­ hensile manipulation. We with respect to the class of manipulable parts. It also allows a manipulator to control multiple parts

  10. Real-time control over networks

    E-Print Network [OSTI]

    Ji, Kun

    2007-09-17T23:59:59.000Z

    researchers to develop NCSs to implement distributed control schemes. This dissertation presents a framework for the modeling, design, stability analysis, control, and bandwidth allocation of real-time control over networks. This framework covers key research...

  11. Control Tower Procedures Nolan, Chap 6

    E-Print Network [OSTI]

    1 1 Control Tower Procedures Nolan, Chap 6 2 Control Towers · Responsibilities: 1. Ensure Towers · VFR Towers ­ NOT delegated separation responsibility · Except initial departure traffic ­ ARTCC separates IFR traffic · Non-radar-approach control towers ­ Delegated IFR separation responsibility

  12. Spectral shift reactor control method

    SciTech Connect (OSTI)

    Impink, A.J. Jr.

    1987-12-29T23:59:59.000Z

    This patent describes the method of operating a pressurized-water fissile-material-fueled spectral-shift nuclear reactor in such manner that short-term reactivity requirement variations can be satisfied without making control rod or chemical shim changes. The reactor includes a pressure vessel enclosing a reactor core and having an inlet and an outlet for circulating a water coolant moderator in heat transfer relationship with the core. The core comprises fuel assemblies disposed therein for generating heat by nuclear fission. The reactor provided with neutron-absorbing control rods which are vertically movable into and out of the core so that movement of the control rods into the core will substantially decrease reactivity and withdrawal of the control rods from the core will substantially increase reactivity. The control rods when inserted into the core displace an equivalent volume of the water coolant moderator. The reactor also provides neutron-spectral-shift rods which have a lower absorptivity for neutrons than the control rods, the neutron-spectral shift rods when inserted into the core displacing an equaivalent volume of the water coolant moderator. The neutron-spectral-shift rods comprises two different types of rods, a first of the different types of the neutron-spectral-shift rods comprising displacer rods which have a low absorptivity for neutrons, the remainder of the neutron-spectral-shift rods comprising gray rods which have an absorption for neutrons which is intermediate the neutron absorption of the control rods and the low neutron absorption of the displacer rods. Each neutron-spectral-shift displacer rod comprises a hollow thin-walled Zircaloy member containing a filling of solid or annular zirconium- or aluminum-containing material for providing internal support and mass for the thin-walled tubular member.

  13. Advanced Light Source control system

    SciTech Connect (OSTI)

    Magyary, S.; Chin, M.; Cork, C.; Fahmie, M.; Lancaster, H.; Molinari, P.; Ritchie, A.; Robb, A.; Timossi, C.

    1989-03-01T23:59:59.000Z

    The Advanced Light Source (ALS) is a third generation 1--2 GeV synchrotron radiation source designed to provide ports for 60 beamlines. It uses a 50 MeV electron linac and 1.5 GeV, 1 Hz, booster synchrotron for injection into a 1--2 GeV storage ring. Interesting control problems are created because of the need for dynamic closed beam orbit control to eliminate interaction between the ring tuning requirements and to minimize orbit shifts due to ground vibrations. The extremely signal sensitive nature of the experiments requires special attention to the sources of electrical noise. These requirements have led to a control system design which emphasizes connectivity at the accelerator equipment end and a large I/O bandwidth for closed loop system response. Not overlooked are user friendliness, operator response time, modeling, and expert system provisions. Portable consoles are used for local operation of machine equipment. Our solution is a massively parallel system with >120 Mbits/sec I/O bandwidth and >1500 Mips computing power. At the equipment level connections are made using over 600 powerful Intelligent Local Controllers (ILC-s) mounted in 3U size Eurocard slots using fiber-optic cables between rack locations. In the control room, personal computers control and display all machine variables at a 10 Hz rate including the scope signals which are collected though the control system. Commercially available software and industry standards are used extensively. Particular attention is paid to reliability, maintainability and upgradeability. 10 refs., 11 figs.

  14. Optimal Integrated Control and Scheduling of Networked Control Systems with Communication

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    1 Optimal Integrated Control and Scheduling of Networked Control Systems with Communication Abstract-- This paper addresses the problem of the optimal control and scheduling of Networked Control Systems over limited bandwidth deterministic networks. Multivariable linear systems subject

  15. Advanced Motion Control: From Classical PID to Nonlinear Adaptive Robust Control

    E-Print Network [OSTI]

    Yao, Bin

    performance re- quirements of modern mechanical systems have forced control engineers to look beyond controllers in implementation. I. INTRODUCTION Modern mechanical systems such as microelectronics manAdvanced Motion Control: From Classical PID to Nonlinear Adaptive Robust Control (Plenary Paper

  16. Control over Wireless NetworksControl over Wireless Networks Karl Henrik Johansson

    E-Print Network [OSTI]

    Johansson, Karl Henrik

    Control over Wireless NetworksControl over Wireless Networks Karl Henrik Johansson School wireless networksOutline: Control over wireless networks · Motivating examples · Benefits and barriersMotivation for control over wireless networkscontrol over wireless networks · Wireless industrial automation

  17. Output Feedback Control and Optimal Bandwidth Allocation of Networked Control Systems

    E-Print Network [OSTI]

    Dong, Jiawei

    2013-04-12T23:59:59.000Z

    A networked control system (NCS) is a control system where sensors, actuators, and controllers are interconnected over a communication network. This dissertation presents a framework for modeling, stability analysis, optimal control, and bandwidth...

  18. HVDC control developments - addressing system requirements

    SciTech Connect (OSTI)

    Hauth, R.L.; Patel, H.S.; Piwko, R.J.

    1984-01-01T23:59:59.000Z

    This article describes typical high voltage direct current (HVDC) control systems and some of the new developments in the control area. HVDC control systems are showing their flexible characteristics as demonstrated, for example, by the new modulation, torsional damping, and alternating current voltage and reactive power controllers. Extensive studies are conducted to design and integrate such controllers into HVDC systems and to assure against any detrimental interactions within the total control system. 8 figures.

  19. A digital controlled solar array regulator employing the charge control

    SciTech Connect (OSTI)

    Cho, Y.J.; Cho, B.H. [Seoul National Univ. (Korea, Republic of)

    1997-12-31T23:59:59.000Z

    A microprocessor controlled SAR system is presented. The inner analog loops employing the charge current control scheme continuously regulate the solar array output power according to the reference value generated by the ECU. The ECU consists of the peak power tracking and the battery charge current regulation algorithm. Modeling, analysis and a design procedure of the inner loops and the system loop are presented taking into account of interaction between the inner analog loops and the outer digital loops. Utilizing the inherent characteristics of the inner voltage and current loop, the system dynamic performance and stability can be optimized up to the speed limit of the microprocessor.

  20. Stable Controller Interpolation and Controller Switching for LPV Systems

    E-Print Network [OSTI]

    Rasmussen, Bryan; Chang, Young Joon

    o tr s th uar od ara y e r terp tee hed mul con 00 1 t f i l c i p a p m g s “ t l l s troller designs at specified operating conditions. This approach utilizes an approach based on the Youla parametrization #1;3#2;. For polytopic systems... matrix inequalities #3;LMIs#4; #1;4#2;. This ffort differs distinctly from existing LPV control design tech- iques, with a focus on interpolation between several fixed linear ontrollers, rather than on synthesis of a single LPV controller. he unique...

  1. Adaptive optimal control: an algorithm for direct digital control

    SciTech Connect (OSTI)

    Farris, D.R.; McDonald, T.E.

    1980-01-01T23:59:59.000Z

    An algorithm for applying advanced control concepts in heating, ventilating, and air conditioning (HVAC) systems has been developed at the Los Alamos Scientific Laboratory (LASL). The algorithm uses optimal control and is adaptive in nature. Simulations for a solar heated and cooled building indicate that use of this algorithm can accomplish a substantial savings in auxiliary energy consumption. In this paper, the algorithm is described and its application is illustrated with a simple example. Simulation results for a more complex system are also presented. The hardware, including the digital computer, needed to implement this algorithm is briefly discussed.

  2. Poincaré-based control of delayed measured systems: Limitations and Improved Control

    E-Print Network [OSTI]

    Jens Christian Claussen

    2007-12-27T23:59:59.000Z

    When a chaotic system is to be stabilized to a unstable orbit, delayed measurement of the system limits the applicability of chaos control techniqes. These limitations are analyzed and control schemes as linear predictive logging control (LPLC) and memory difference control (MDC) are introduced which can overcome those limitations for chaos control schemes that act in the Poincar\\'{e} section as Ott-Grebogi-Yorke (OGY) control and Bielawski-Derozier_Glorieux control (difference control).

  3. Control rod driveline and grapple

    DOE Patents [OSTI]

    Germer, John H. (San Jose, CA)

    1987-01-01T23:59:59.000Z

    A control rod driveline and grapple is disclosed for placement between a control rod drive and a nuclear reactor control rod containing poison for parasitic neutron absorption required for reactor shutdown. The control rod is provided with an enlarged cylindrical handle which terminates in an upwardly extending rod to provide a grapple point for the driveline. The grapple mechanism includes a tension rod which receives the upwardly extending handle and is provided with a lower annular flange. A plurality of preferably six grapple segments surround and grip the control rod handle. Each grapple rod segment grips the flange on the tension rod at an interior upper annular indentation, bears against the enlarged cylindrical handle at an intermediate annulus and captures the upwardly flaring frustum shaped handle at a lower and complementary female segment. The tension rods and grapple segments are surrounded by and encased within a cylinder. The cylinder terminates immediately and outward extending annulus at the lower portion of the grapple segments. Excursion of the tension rod relative to the encasing cylinder causes rod release at the handle by permitting the grapple segments to pivot outwardly and about the annulus on the tension rod so as to open the lower defined frustum shaped annulus and drop the rod. Relative movement between the tension rod and cylinder can occur either due to electromagnetic release of the tension rod within defined limits of travel or differential thermal expansion as between the tension rod and cylinder as where the reactor exceeds design thermal limits.

  4. RHIC stochastic cooling motion control

    SciTech Connect (OSTI)

    Gassner, D.; DeSanto, L.; Olsen, R.H.; Fu, W.; Brennan, J.M.; Liaw, CJ; Bellavia, S.; Brodowski, J.

    2011-03-28T23:59:59.000Z

    Relativistic Heavy Ion Collider (RHIC) beams are subject to Intra-Beam Scattering (IBS) that causes an emittance growth in all three-phase space planes. The only way to increase integrated luminosity is to counteract IBS with cooling during RHIC stores. A stochastic cooling system for this purpose has been developed, it includes moveable pick-ups and kickers in the collider that require precise motion control mechanics, drives and controllers. Since these moving parts can limit the beam path aperture, accuracy and reliability is important. Servo, stepper, and DC motors are used to provide actuation solutions for position control. The choice of motion stage, drive motor type, and controls are based on needs defined by the variety of mechanical specifications, the unique performance requirements, and the special needs required for remote operations in an accelerator environment. In this report we will describe the remote motion control related beam line hardware, position transducers, rack electronics, and software developed for the RHIC stochastic cooling pick-ups and kickers.

  5. Electron gun controlled smart structure

    DOE Patents [OSTI]

    Martin, Jeffrey W. (Albuquerque, NM); Main, John Alan (Lexington, KY); Redmond, James M. (Albuquerque, NM); Henson, Tammy D. (Albuquerque, NM); Watson, Robert D. (Tijeras, NM)

    2001-01-01T23:59:59.000Z

    Disclosed is a method and system for actively controlling the shape of a sheet of electroactive material; the system comprising: one or more electrodes attached to the frontside of the electroactive sheet; a charged particle generator, disposed so as to direct a beam of charged particles (e.g. electrons) onto the electrode; a conductive substrate attached to the backside of the sheet; and a power supply electrically connected to the conductive substrate; whereby the sheet changes its shape in response to an electric field created across the sheet by an accumulation of electric charge within the electrode(s), relative to a potential applied to the conductive substrate. Use of multiple electrodes distributed across on the frontside ensures a uniform distribution of the charge with a single point of e-beam incidence, thereby greatly simplifying the beam scanning algorithm and raster control electronics, and reducing the problems associated with "blooming". By placing a distribution of electrodes over the front surface of a piezoelectric film (or other electroactive material), this arrangement enables improved control over the distribution of surface electric charges (e.g. electrons) by creating uniform (and possibly different) charge distributions within each individual electrode. Removal or deposition of net electric charge can be affected by controlling the secondary electron yield through manipulation of the backside electric potential with the power supply. The system can be used for actively controlling the shape of space-based deployable optics, such as adaptive mirrors and inflatable antennae.

  6. Boiler Maximum Achievable Control Technology (MACT) Technical...

    Energy Savers [EERE]

    Boiler Maximum Achievable Control Technology (MACT) Technical Assistance - Fact Sheet, April 2015 Boiler Maximum Achievable Control Technology (MACT) Technical Assistance - Fact...

  7. FY 2015 Summary Control Table by Appropriation

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Summary Control Table by Appropriation (dollars in thousands - OMB Scoring) Summary Control Table by Appropriation Page 1 FY 2015 Congressional Request FY 2013 FY 2014 FY 2014 FY...

  8. Quality Control Inspector: Different Programs, Different Responsibilit...

    Broader source: Energy.gov (indexed) [DOE]

    document explains the role of the Quality Control Inspector (QCI) in regards to the Home Energy Professional Certification Exam. Quality Control Inspector: Different Programs,...

  9. Document Control Program | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Training, Documents, & Records Document Control Program The Document Control (DC) Plan ensures that only approved, current versions of such documents are used in the workplace or...

  10. INCOMING DOCUMENT CONTROL FORM DOCUMENT DESCRIPTION ORGANIZATIO

    Office of Legacy Management (LM)

    INCOMING DOCUMENT CONTROL FORM DOCUMENT DESCRIPTION ORGANIZATIO )ATE COMPLETED: ACTION NUMBER: I I I DOCUMENT CONTROL DATE INITIALS DATA BASE: ACTION LOG: FILED: To : Doug...

  11. Development of Building Automation and Control Systems

    E-Print Network [OSTI]

    Yang, Yang; Zhu, Qi; Maasoumy, Mehdi; Sangiovanni-Vincentelli, Alberto

    2012-01-01T23:59:59.000Z

    A design flow for building automation and control systems,’’Development of Building Automation and Control Systems Yangdesign of the build- ing automation system (including the

  12. Model Predictive Control for Energy Efficient Buildings

    E-Print Network [OSTI]

    Ma, Yudong

    2012-01-01T23:59:59.000Z

    control logic for building energy systems. Most moderncontrol actuators. Modern digital building automation systemssystem in the lab. The lab is equipped with a modern digital control

  13. Model Predictive Control for Energy Efficient Buildings

    E-Print Network [OSTI]

    Ma, Yudong

    2012-01-01T23:59:59.000Z

    Learning Control for Thermal Energy Storage Systems”. In:Predictive Control of Thermal Energy Storage in Buildingmaking use of building thermal energy storage, and this work

  14. Facile and controllable electrochemical reduction of graphene...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and controllable electrochemical reduction of graphene oxide and its applications. Facile and controllable electrochemical reduction of graphene oxide and its applications....

  15. DEMAND CONTROLLED VENTILATION AND CLASSROOM VENTILATION

    E-Print Network [OSTI]

    Fisk, William J.

    2014-01-01T23:59:59.000Z

    of energy and environmental benefits of demand controlledindicate the energy and cost savings for demand controlled24) (California Energy Commission 2008), demand controlled

  16. Mark Jankowski: Minnesota Pollution Control Agency

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Mark Jankowski: Minnesota Pollution Control Agency March 1, 2015 Mark Jankowski now at Minnesota Pollution Control Agency - 2 - Mark Jankowski worked at the Lab twice: first after...

  17. Development of Building Automation and Control Systems

    E-Print Network [OSTI]

    Yang, Yang; Zhu, Qi; Maasoumy, Mehdi; Sangiovanni-Vincentelli, Alberto

    2012-01-01T23:59:59.000Z

    design flow for building automation systems that focuses onflow for building automation and control systems,’’ in Proc.Development of Building Automation and Control Systems Yang

  18. RELIABILITY IMPROVEMENT OF BART TRAIN CONTROL

    E-Print Network [OSTI]

    Turner, D.B.

    2011-01-01T23:59:59.000Z

    2) of the BART Automatic Train Control System. BART 74-111,systems. The unique level of sophistication automatic train controls

  19. Brushless Motor Controller Report Spring 2010

    E-Print Network [OSTI]

    Ruina, Andy L.

    Brushless Motor Controller Report Spring 2010 May 15, 2010 Brian Clementi MAE of 2010 322 Bogert ...................................................................................................... 5 A. Motor Description...................................................................................................... 5 B. The Motor Controller Board

  20. Heat Controller: Noncompliance Determination (2014-SE-15004)...

    Office of Environmental Management (EM)

    a Notice of Noncompliance Determination to Heat Controller, Inc. finding that the room air conditioner distributed in commerce by Heat Controller as Comfort Aire brand models...

  1. DrControl --An Interactive Course Material for Teaching Control Engineering

    E-Print Network [OSTI]

    Zhao, Yuxiao

    Control for teaching control theory concepts mixed together with exercises and example models in Modelica. The active: DrControl, DrModelica, modeling, simula- tion, OMNotebook, teaching, interactive, Control 1 for teach- ing control theory together with control applications in Modelica [1] [2]. It is developed

  2. Automotive speed control and cruise controls. (Bibliography from the Global Mobility database). Published Search

    SciTech Connect (OSTI)

    NONE

    1996-08-01T23:59:59.000Z

    The bibliography contains citations concerning speed controls and cruise controls for automobiles, trucks, and industrial forklifts. Topics include stability analysis, H-infinity control theory, Proportional Integrative Derivative (PID) control, and idle speed control. The use and effect of controls in various highway situations are reviewed. (Contains 50-250 citations and includes a subject term index and title list.) (Copyright NERAC, Inc. 1995)

  3. Pulse combustor with controllable oscillations

    DOE Patents [OSTI]

    Richards, George A. (Morgantown, WV); Welter, Michael J. (Columbiana, OH); Morris, Gary J. (Morgantown, WV)

    1992-01-01T23:59:59.000Z

    A pulse combustor having thermally induced pulse combustion in a continuously flowing system is described. The pulse combustor is fitted with at lease one elongated ceramic body which significantly increases the heat transfer area in the combustion chamber of the combustor. The ceramic body or bodies possess sufficient mass and heat capacity to ignite the fuel-air charge once the ceramic body or bodies are heated by conventional spark plug initiated combustion so as to provide repetitive ignition and combustion of sequentially introduced fuel-air charges without the assistance of the spark plug and the rapid quenching of the flame after each ignition in a controlled manner so as to provide a selective control over the oscillation frequency and amplitude. Additional control over the heat transfer in the combustion chamber is provided by employing heat exchange mechanisms for selectively heating or cooling the elongated ceramic body or bodies and/or the walls of the combustion chamber.

  4. Radiological control manual. Revision 1

    SciTech Connect (OSTI)

    Kloepping, R.

    1996-05-01T23:59:59.000Z

    This Lawrence Berkeley National Laboratory Radiological Control Manual (LBNL RCM) has been prepared to provide guidance for site-specific additions, supplements and interpretation of the DOE Radiological Control Manual. The guidance provided in this manual is one methodology to implement the requirements given in Title 10 Code of Federal Regulations Part 835 (10 CFR 835) and the DOE Radiological Control Manual. Information given in this manual is also intended to provide demonstration of compliance to specific requirements in 10 CFR 835. The LBNL RCM (Publication 3113) and LBNL Health and Safety Manual Publication-3000 form the technical basis for the LBNL RPP and will be revised as necessary to ensure that current requirements from Rules and Orders are represented. The LBNL RCM will form the standard for excellence in the implementation of the LBNL RPP.

  5. Coherent control of plasma dynamics

    E-Print Network [OSTI]

    He, Z -H; Lebailly, V; Nees, J A; Krushelnick, K; Thomas, A G R

    2015-01-01T23:59:59.000Z

    Coherent control of a system involves steering an interaction to a final coherent state by controlling the phase of an applied field. Plasmas support coherent wave structures that can be generated by intense laser fields. Here, we demonstrate the coherent control of plasma dynamics in a laser wakefield electron acceleration experiment. A genetic algorithm is implemented using a deformable mirror with the electron beam signal as feedback, which allows a heuristic search for the optimal wavefront under laser-plasma conditions that is not known a priori. We are able to improve both the electron beam charge and angular distribution by an order of magnitude. These improvements do not simply correlate with having the `best' focal spot, since the highest quality vacuum focal spot produces a greatly inferior electron beam, but instead correspond to the particular laser phase that steers the plasma wave to a final state with optimal accelerating fields.

  6. Colloidal Micromotors: Controlled Directed Motion

    E-Print Network [OSTI]

    Baraban, Larysa; Makarov, Denys; Leiderer, Paul; Erbe, Artur

    2008-01-01T23:59:59.000Z

    Here we demonstrate a synthetic micro-engine, based on long-range controlled movement of colloidal particles, which is induced by a local catalytic reaction. The directed motion at long timescales was achieved by placing specially designed magnetic capped colloids in a hydrogen peroxide solution at weak magnetic fields. The control of the motion of the particles was provided by changes of the concentration of the solution and by varying the strength of the applied magnetic field. Such synthetic objects can then be used not only to understand the fundamental driving processes but also be employed as small motors in biological environments, for example, for the transportation of molecules in a controllable way.

  7. Colloidal Micromotors: Controlled Directed Motion

    E-Print Network [OSTI]

    Larysa Baraban; Christian Kreidler; Denys Makarov; Paul Leiderer; Artur Erbe

    2008-07-10T23:59:59.000Z

    Here we demonstrate a synthetic micro-engine, based on long-range controlled movement of colloidal particles, which is induced by a local catalytic reaction. The directed motion at long timescales was achieved by placing specially designed magnetic capped colloids in a hydrogen peroxide solution at weak magnetic fields. The control of the motion of the particles was provided by changes of the concentration of the solution and by varying the strength of the applied magnetic field. Such synthetic objects can then be used not only to understand the fundamental driving processes but also be employed as small motors in biological environments, for example, for the transportation of molecules in a controllable way.

  8. Spectral shift reactor control method

    SciTech Connect (OSTI)

    Impink, A.J. Jr.

    1987-08-18T23:59:59.000Z

    The method is described of closely controlling the reactor water coolant temperature of an operating spectral-shift nuclear reactor, the reactor comprising a core formed of fuel assemblies through which the reactor water coolant flows; different types of elongated elements operable to be controllably moved into and out of the core; one type of the elongated elements comprising control rods formed of neutron absorbing material and operable to decrease reactivity through neutron absorption when inserted into the core; another of the types of elongated elements comprising displacer rods formed of material which has a low absorption for neutrons and which have overall neutron-absorbing and moderating characteristics essentially not exceeding those of hollow tubular Zircaloy members with a filling zirconium oxide or aluminum oxide, the displacer rods operating to displace an equivalent volume of water coolant fluid from the core when inserted therein to decrease reactivity and to increase reactivity when moved from the core.

  9. Innovative technologies for impurity control

    SciTech Connect (OSTI)

    Nygren, R.E. (ed.)

    1992-03-01T23:59:59.000Z

    A brief discussion of the following topics is given in this report: Liquid Metal Divertors; Lithium Droplet Beam Divertor; Preferential Pumping of Helium; Reduced Erosion with Cu-Li, W-Li, etc.; Reduction of Erosion by Thermionic Emission; Reduced Erosion in Boronized Graphites; Proposal for Materials Experiments in TRIAM; Carbon-SiC for Plasma Facing Components; Helium Pumping with Palladium; Large Area Pump Limiter; Techniques for Enhanced Heat Removal; New Outlook on Gaseous Divertors; Gaseous Divertor Simulations; Impurity Seeding to Control ITER Particle and Heat Loads; Gaseous Divertor Experiments; Electrical Biasing to Control SOL Particle Fluxes; Biased Limiter in TEXTOR and Biased Divertor in PBX-M; Particle and Heat Flux Control Using Ponderomotive Forces; Helium Exhaust Using ICRF; Ergodic Magnetic Limiter Experiments in JFT-2M; and Helium Exhaust Using Fishbones.

  10. Multi-robot control interface

    DOE Patents [OSTI]

    Bruemmer, David J. (Idaho Falls, ID); Walton, Miles C. (Idaho Falls, ID)

    2011-12-06T23:59:59.000Z

    Methods and systems for controlling a plurality of robots through a single user interface include at least one robot display window for each of the plurality of robots with the at least one robot display window illustrating one or more conditions of a respective one of the plurality of robots. The user interface further includes at least one robot control window for each of the plurality of robots with the at least one robot control window configured to receive one or more commands for sending to the respective one of the plurality of robots. The user interface further includes a multi-robot common window comprised of information received from each of the plurality of robots.

  11. Controlling robots with spoken commands

    SciTech Connect (OSTI)

    Beugelsdijk, T.; Phelan, P.

    1987-10-01T23:59:59.000Z

    A robotic system for handling radioactive materials has been developed at Los Alamos National Laboratory. Because of safety considerations, the robot must be under the control of a human operator continuously. In this paper we describe the implementation of a voice-recognition system that makes such control possible, yet permits the robot to perform preprogrammed manipulations without the operator's intervention. We also describe the training given both the operator and the voice recognition-system, as well as practical problems encountered during routine operation. A speech synthesis unit connected to the robot's control computer provides audible feedback to the operator. Thus, when a task is completed or if an emergency develops, the computer provides an appropriate spoken message. Implementation and operation of this commercially available hardware are discussed.

  12. Real Time Control Design for Mobile Robot Fault Tolerant Control.

    E-Print Network [OSTI]

    Kuehnlenz, Kolja

    Mobile Robot. Cristian Axenie Automation and Industrial Informatics Department Razvan Solea, Lecturer, Ph-time distributed control application with fault tolerance capabilities for differential wheeled mobile robots mobile robot the author has been able to develop a hierarchical software application that minimizes costs

  13. Controlling Across Complex Networks: Emerging links between networks and control

    E-Print Network [OSTI]

    Mexico, Albuquerque, NM 87131-0001, USA. tanner@unm.edu 3 Electrical & Computer Engineering Department, MSC01 1100, 1 University of New Mexico, Albuquerque, NM 87131-0001, USA. chaouki@ece.unm.edu 4 Data's arsenal to make them available to control engineers, and describe how ideas developed for complex net

  14. august 2014 IEEE CONTROL SYSTEMS MAGAZINE 37 PEOPLE IN CONTROL

    E-Print Network [OSTI]

    Fainman, Yeshaiahu

    is the alfred Fitler Moore Professor of Net- work science at the university of Pennsylvania (Penn), cur- rently, tehran, Iran, in February 1995, an M.s. in electrical and computer engineering from the university of New Mexico in albuquerque in December 1998, and a Ph.D. in control and dynamical systems from the Cali

  15. Controlling across complex networks Emerging links between networks and control

    E-Print Network [OSTI]

    , USA b Mechanical Engineering Department, MSC01 1150, 1 University of New Mexico, Albuquerque, NM 87131-0001, USA c Electrical & Computer Engineering Department, MSC01 1100, 1 University of New Mexico for control design is evident in large-scale interconnected multi-agent systems. In this class of systems

  16. Risk and Controls 101 What is a Risk and Control?

    E-Print Network [OSTI]

    to assets and records only in accordance with management's general or specific policies and procedures, management review and action taken on the exceptions Example: The Airline Industry Preventive? Detective? 5 #12;Two Ways Controls are Executed Manual (performed by people) Examples: Authorizations, Management

  17. A Probabilistic Particle Control Approach to Optimal, Robust Predictive Control

    E-Print Network [OSTI]

    Williams, Brian C.

    Autonomous vehicles need to be able to plan trajectories to a specified goal that avoid obstacles; for example in the case of localization, the belief state about a vehicle's position can consist of highly non of predictive stochastic control is robust path planning for vehicles under un- certainty. Uncertainty arises

  18. Hybrid Motion Control combining Inverse Kinematics and Inverse Dynamics Controllers

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    environments provides the possibility to explore novel solutions for designing virtual characters interacting research. Most of the contributions have addressed the control of articulated figures using robotics Trajectories End-effector Trajectories (XS , S , S) T XT Cartesian Space Physics Modeling Virtual Performer

  19. D-Zero HVAC Heat Pump Controls

    SciTech Connect (OSTI)

    Markley, Dan; /Fermilab

    2004-04-14T23:59:59.000Z

    This engineering note documents the integration of Dzero Heat Pump 1 through Heat Pump 15 into the cryo/gas process control system commonly referred to as the cryo control system. Heat pumps 1 through 15 control the ambient air temperature on the 3rd, 5th, and 6th floor office areas at Dzero. The entire Johnson HVAC control system was replaced with a Siemens control system in 1999 leaving behind the 15 heat pumps with stand-alone Johnson controllers. Now, these 15 heat pump Johnson controllers are being replaced with small stand alone Beckhoff BC9000 controllers. The Beckhoff BC9000 controllers are network able into the existing Intellution control system. The Beckhoff BC9000 controllers use the cryo private Ethernet network and an OPC driver to get data into the Intellution SCADA node databases. The BC9000 is also programmed over this same Ethernet network.

  20. Symbolic diagnosis for intelligent control 

    E-Print Network [OSTI]

    Painter, John H.; Jowers, S.

    1988-08-24T23:59:59.000Z

    I INTRODUCTION I 0-8186-2012--9!89/8888/0280$01 .OO 0 1989 IEEE 280 I I !5si I I I I Intelligent Control is loosely defined here as the use of symbolic processing for the purpose of controlling I c I I I I I Authorized licensed use... limited to: Texas A M University. Downloaded on February 18,2010 at 16:28:03 EST from IEEE Xplore. Restrictions apply. trol tactics which may not be compatible with an in- flexible, ?hard-wired,? direct encoding of algorithms in the numerical...

  1. Electrically controlled polymeric gel actuators

    DOE Patents [OSTI]

    Adolf, D.B.; Shahinpoor, M.; Segalman, D.J.; Witkowski, W.R.

    1993-10-05T23:59:59.000Z

    Electrically controlled polymeric gel actuators or synthetic muscles are described capable of undergoing substantial expansion and contraction when subjected to changing pH environments, temperature, or solvent. The actuators employ compliant containers for the gels and their solvents. The gels employed may be cylindrical electromechanical gel fibers such as polyacrylamide fibers or a mixture of poly vinyl alcohol-polyacrylic acid arranged in a parallel aggregate and contained in an electrolytic solvent bath such as salt water. The invention includes smart, electrically activated devices exploiting this phenomenon. These devices are capable of being manipulated via active computer control as large displacement actuators for use in adaptive structure such as robots. 11 figures.

  2. Centralized digital control of accelerators

    SciTech Connect (OSTI)

    Melen, R.E.

    1983-09-01T23:59:59.000Z

    In contrasting the title of this paper with a second paper to be presented at this conference entitled Distributed Digital Control of Accelerators, a potential reader might be led to believe that this paper will focus on systems whose computing intelligence is centered in one or more computers in a centralized location. Instead, this paper will describe the architectural evolution of SLAC's computer based accelerator control systems with respect to the distribution of their intelligence. However, the use of the word centralized in the title is appropriate because these systems are based on the use of centralized large and computationally powerful processors that are typically supported by networks of smaller distributed processors.

  3. Apparatus for controlling fluidized beds

    DOE Patents [OSTI]

    Rehmat, A.G.; Patel, J.G.

    1987-05-12T23:59:59.000Z

    An apparatus and process are disclosed for control and maintenance of fluidized beds under non-steady state conditions. An ash removal conduit is provided for removing solid particulates from a fluidized bed separate from an ash discharge conduit in the lower portion of the grate supporting such a bed. The apparatus and process of this invention is particularly suitable for use in ash agglomerating fluidized beds and provides control of the fluidized bed before ash agglomeration is initiated and during upset conditions resulting in stable, sinter-free fluidized bed maintenance. 2 figs.

  4. Controlling Structures | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand JumpConceptual Model, clickInformationNew| Exploration Technique: Controlled SourceControlling

  5. AUTOMATIC GENERATION OF OPTIMAL CONTROLLERS THROUGH MODEL CHECKING TECHNIQUES

    E-Print Network [OSTI]

    Tronci, Enrico

    AUTOMATIC GENERATION OF OPTIMAL CONTROLLERS THROUGH MODEL CHECKING TECHNIQUES Giuseppe Della Penna Keywords: Controller Synthesis, Controller Optimization, Model Checking, Nonlinear Systems Abstract: We INTRODUCTION Control systems (or, shortly, controllers) are small hardware/software components that control

  6. Self-Organizing and Optimal Control for Nonlinear Systems

    E-Print Network [OSTI]

    Dong, Wenjie

    2009-01-01T23:59:59.000Z

    Adaptive optimal control for continuous-time linear systemsOptimal Control of Uncertain Non- linear Systems Optimal control

  7. Methods for Reachability-based Hybrid Controller Design

    E-Print Network [OSTI]

    Ding, Jerry

    2012-01-01T23:59:59.000Z

    controller design for modern control systems such as foundmodern autonomous flight systems, the tasks of management and control

  8. Controlling

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power Administration would likeConstitution And BylawsMetal-Organic Frameworks

  9. Nuclear Material Control and Accountability

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2011-06-27T23:59:59.000Z

    This Order establishes performance objectives, metrics, and requirements for developing, implementing, and maintaining a nuclear material control and accountability program within DOE/NNSA and for DOE-owned materials at other facilities that are exempt from licensing by the Nuclear Regulatory Commission. Cancels DOE M 470.4-6. Admin Chg 1, 8-3-11.

  10. Control of Nuclear Weapon Data

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2011-07-21T23:59:59.000Z

    The directive establishes the policy, process and procedures for control of nuclear weapon data to ensure that dissemination of the information is restricted to individuals with appropriate clearances, approved authorization and valid need-to-know in keeping with the Atomic Energy Act (as amended) stipulation of ensuring common defense and security. Cancels DOE O 5610.2.

  11. Multiple input electrode gap controller

    DOE Patents [OSTI]

    Hysinger, C.L.; Beaman, J.J.; Melgaard, D.K.; Williamson, R.L.

    1999-07-27T23:59:59.000Z

    A method and apparatus for controlling vacuum arc remelting (VAR) furnaces by estimation of electrode gap based on a plurality of secondary estimates derived from furnace outputs. The estimation is preferably performed by Kalman filter. Adaptive gain techniques may be employed, as well as detection of process anomalies such as glows. 17 figs.

  12. Multiple input electrode gap controller

    DOE Patents [OSTI]

    Hysinger, Christopher L. (Austin, TX); Beaman, Joseph J. (Austin, TX); Melgaard, David K. (Albuquerque, NE); Williamson, Rodney L. (Albuquerque, NE)

    1999-01-01T23:59:59.000Z

    A method and apparatus for controlling vacuum arc remelting (VAR) furnaces by estimation of electrode gap based on a plurality of secondary estimates derived from furnace outputs. The estimation is preferably performed by Kalman filter. Adaptive gain techniques may be employed, as well as detection of process anomalies such as glows.

  13. Temperature controlled high voltage regulator

    DOE Patents [OSTI]

    Chiaro, Jr., Peter J. (Clinton, TN); Schulze, Gerald K. (Knoxville, TN)

    2004-04-20T23:59:59.000Z

    A temperature controlled high voltage regulator for automatically adjusting the high voltage applied to a radiation detector is described. The regulator is a solid state device that is independent of the attached radiation detector, enabling the regulator to be used by various models of radiation detectors, such as gas flow proportional radiation detectors.

  14. Improving Inventory Control Using Forecasting

    E-Print Network [OSTI]

    Balandran, Juan

    2005-12-16T23:59:59.000Z

    EMGT 835 FIELD PROJECT: Improving Inventory Control Using Forecasting By Juan Mario Balandran jmbg@hotmail.com Master of Science The University of Kansas Fall Semester, 2005 An EMGT Field Project report submitted...............................................................................................................................................10 Current Inventory Forecast Process ...........................................................................................10 Development of Alternative Forecast Process...

  15. Control of Motorcycle Steering Instabilities

    E-Print Network [OSTI]

    Cambridge, University of

    Control of Motorcycle Steering Instabilities SIMOS EVANGELOU, DAVID J.N. LIMEBEER, ROBIN S. SHARP, and MALCOLM C. SMITH dvances in modeling bicycle and motor- cycle dynamics are providing improved of these modes are wobble and weave. Wobble is a steering oscillation that is reminis- cent of the caster shimmy

  16. Application Study: Robot Arm Control

    E-Print Network [OSTI]

    Visser, Arnoud

    Application Study: Robot Arm Control An experience using distributed AIM Arnoud Visser Michiel Wiedijk Frank Tuijnman Hamideh Afsarmanesh November 1993 u University of Amsterdam #12;2 1. The Robot Arm application at UvA In the robot arm application we deal with three agents that are heterogeneous

  17. Three phase AC motor controller

    DOE Patents [OSTI]

    Vuckovich, Michael (Elizabeth, PA); Wright, Maynard K. (Bethel Park, PA); Burkett, John P. (South Huntington Township, Westmoreland County, PA)

    1984-03-20T23:59:59.000Z

    A motor controller for a three phase AC motor (10) which is adapted to operate bidirectionally from signals received either from a computer (30) or a manual control (32). The controller is comprised of digital logic circuit means which implement a forward and reverse command signal channel (27, 29) for the application of power through the forward and reverse power switching relays (16, 18, 20, 22). The digital logic elements are cross coupled to prevent activation of both channels simultaneously and each includes a plugging circuit (65, 67) for stopping the motor upon the removal of control signal applied to one of the two channels (27, 29) for a direction of rotation desired. Each plugging circuit (65, 67) includes a one-shot pulse signal generator (88, 102) which outputs a single pulse signal of predetermined pulsewidth which is adapted to inhibit further operation of the application of power in the channel which is being activated and to apply a reversal command signal to the other channel which provides a reversed phase application of power to the motor for a period defined by the pulse-width output of the one-shot signal generator to plug the motor (10) which will then be inoperative until another rotational command signal is applied to either of the two channels.

  18. Insect Controls for Organic Gardeners.

    E-Print Network [OSTI]

    Lewis, Kenneth R.; Turney, H.A.

    1979-01-01T23:59:59.000Z

    ) ............................................ 7 Praying Mantid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 7 Lady Beetles ........................................................... 7 CHEMICAL CONTROL METHODS... plant varieties which exhibit less insect damage when compared to other varieties under similar grow ing conditions. Some varieties may be less tasty to Figure 1. Managing and protecting the organic garden can be an enjoyable family project. 3...

  19. MODELING HORMONAL CONTROL MENSTRUAL CYCLE

    E-Print Network [OSTI]

    MODELING HORMONAL CONTROL OF THE MENSTRUAL CYCLE James F. Selgrade Department of Mathematics of five hormones important for regulation and maintenance of the menstrual cycle. Models which correctly@math.ncsu.edu Abstract This study presents a strategy for developing a mathematical model describing the concentrations

  20. MANDATORY MEASURES OUTDOOR LIGHTING CONTROLS

    E-Print Network [OSTI]

    California at Davis, University of

    MANDATORY MEASURES OUTDOOR LIGHTING CONTROLS (Reference: Sub-Chapter 4, Section 130.2) #12;SECTION 5 Additions and Alterations Any alteration that increases the connected lighting load must meet all No measures required OUTDOOR LIGHTING11/20/2014 #12;SECTION 5 BACKLIGHT, UPLIGHT, AND GLARE (BUG) RATINGS

  1. Smart Lighting Controller!! Smart lighting!

    E-Print Network [OSTI]

    Anderson, Betty Lise

    1! Smart Lighting Controller!! #12;2! Smart lighting! No need to spend energy lighting the room if://blogs.stthomas.edu/realestate/2011/01/24/residential-real-estate-professionals-how-do-you- develop feedback! There is a connection between the output and the input! Therefore forces inputs to same voltage

  2. I) EXAS AIR CONTROL BLAR

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    I) EXAS AIR CONTROL BLAR 6330 HWY. 290 EAST, AUSTIN, TEXAS 78723, 512451-5711 DICK WHmINGTON, P.E. JOHN L. BLAIR CHAIRMAN MARCUS M. KEY, M.D. CALVIN 8. PARNELL, JR., Ph.D., P.E....

  3. Cardiovascular & Respiratory Modeling, Analysis & Control

    E-Print Network [OSTI]

    Batzel, Jerry

    of Grodins' system . . . . . 21 1.4 The Linear-quadratic Regulator Problem . . . . . . . . . . . . . 23 1-least-squares formulation of the param- eter identification problem . . . . . . . . . . . . . . 30 1.7 Numerical Results . . . . . . . . . . . . 47 2.1.2 The chemical control system for ventilation . . . . . 48 2.1.3 Structural features

  4. briefing paper Controlling Illegal Logging

    E-Print Network [OSTI]

    page1 briefing paper Controlling Illegal Logging: Implementation of the EU Timber Regulation Jon placing illegally harvested timber and timber products on the European market. It adopts a broad definition of `illegally harvested' and applies to timber both imported into and produced within the EU

  5. CUNY EXPORT CONTROL PROCEDURES 11. Procurement

    E-Print Network [OSTI]

    Rosen, Jay

    CUNY EXPORT CONTROL PROCEDURES 11. Procurement This section addresses the identification of export to normal outbound export controls. Hence, it is CUNY's procedure to require vendors of laboratory to the laboratory user or administrator and the Export Control Administrator for the College. The Export Control

  6. Fuzzy decision and control, the Bayes context

    E-Print Network [OSTI]

    Painter, John H.

    1993-12-15T23:59:59.000Z

    This paper shows how it is that fuzzy control may be viewed as a particular kind of stochastic (Bayesian) control. With the Bayes approach, fuzzy control may be viewed as an ensembled-average control, where the average is taken over a set...

  7. Power Control in Wireless Cellular Networks

    E-Print Network [OSTI]

    Chiang, Mung

    Power Control in Wireless Cellular Networks #12;#12;Power Control in Wireless Cellular Networks R in Networking sample Vol. x, No y (2008) 1­156 c 2008 Power Control in Wireless Cellular Networks, and connectivity. Power control in both uplink and downlink of a cellular network has been extensively studied

  8. Controlling an uninstrumented manipulator by visual servoing

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Controlling an uninstrumented manipulator by visual servoing ´Eric Marchand, Fran¸cois Chaumette and this manipulator is usually open-loop controlled. In order to get a more efficient control interface, we propose, measurements of the manipulator motion with proprioceptive sensors is not required to precisely control the end

  9. Second Conference on Control Engineering, 1982,

    E-Print Network [OSTI]

    Moore, John Barratt

    in a control system design. Each method contributes at its point of strength so that a better trade-off between in the frequency band of control action, self-tuning regulator (STR) control tech- niques as [4,5] can be used adaptive controll- ers can feedback an estimate of an unstable plant state, given from an LQG design

  10. RESIDENTIAL THERMOSTATS: COMFORT CONTROLS IN CALIFORNIA HOMES

    E-Print Network [OSTI]

    Meier, Alan K.

    2008-01-01T23:59:59.000Z

    heating, cooling and ventilating controls are more sophisticated than commonly available in North America 29 . Remote

  11. Controlled Hydrogen Fleet and Infrastructure Analysis (Presentation)

    SciTech Connect (OSTI)

    Wipke, K.; Sprik, S.; Kurtz, J.; Ramsden, T.

    2010-06-10T23:59:59.000Z

    This presentation summarizes controlled hydrogen fleet & infrastructure analysis undertaken for the DOE Fuel Cell Technologies Program.

  12. ON CONSTRUCTING 2 T CONTROL CHARTS

    E-Print Network [OSTI]

    Pignatiello, Joe

    probability at a specified value. 1.0 INTRODUCTION Statistical process control (SPC) charts are toolsON CONSTRUCTING 2 T CONTROL CHARTS FOR RETROSPECTIVE EXAMINATION Gunabushanam Nedumaran Oracle control; multivariate process; 2 control charts; Hotelling's T2 ; 2 D,MAXT^ -type statistic; false alarm

  13. Automatic Control Flow Generation from Software Architectures

    E-Print Network [OSTI]

    Lau, Kung-Kiu

    -time automatically. To achieve this we take a different approach to system construction. We take control out.-K. Lau and V. Ukis generic connectors, and generate control flow of the system automatically at run in different systems with different control flows. Our automatic runtime control flow generation not only

  14. Hamiltonian Control Systems Delft University of Technology

    E-Print Network [OSTI]

    Knobloch,Jürgen

    of energy). #12;March 12, 2012 3 Hamiltonian Control Systems Port-Based Modeling of Physical Systems How Hamiltonian Control Systems Port-Based Modeling of Physical Systems #12;March 12, 2012 5 Hamiltonian Control Hamiltonian Control Systems Energy Storage How do we obtain H(x)? · Integral of power P = e f w.r.t. time

  15. Optimal Control c David I. Wilson

    E-Print Network [OSTI]

    petroleum refinery, steel smelter, etc.) are very interested in optimal control & operation because it saves

  16. Study Shows Active Power Controls from Wind May Increase Revenues...

    Broader source: Energy.gov (indexed) [DOE]

    inertial control, primary frequency control, and automatic generation control. Inertial control is the immediate response to a power disturbance based on a frequency change. This...

  17. Power Generating Stationary Engines Nox Control: A Closed Loop...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Generating Stationary Engines Nox Control: A Closed Loop Control Technology Power Generating Stationary Engines Nox Control: A Closed Loop Control Technology Poster presented at...

  18. Cyber Incidents Involving Control Systems

    SciTech Connect (OSTI)

    Robert J. Turk

    2005-10-01T23:59:59.000Z

    The Analysis Function of the US-CERT Control Systems Security Center (CSSC) at the Idaho National Laboratory (INL) has prepared this report to document cyber security incidents for use by the CSSC. The description and analysis of incidents reported herein support three CSSC tasks: establishing a business case; increasing security awareness and private and corporate participation related to enhanced cyber security of control systems; and providing informational material to support model development and prioritize activities for CSSC. The stated mission of CSSC is to reduce vulnerability of critical infrastructure to cyber attack on control systems. As stated in the Incident Management Tool Requirements (August 2005) ''Vulnerability reduction is promoted by risk analysis that tracks actual risk, emphasizes high risk, determines risk reduction as a function of countermeasures, tracks increase of risk due to external influence, and measures success of the vulnerability reduction program''. Process control and Supervisory Control and Data Acquisition (SCADA) systems, with their reliance on proprietary networks and hardware, have long been considered immune to the network attacks that have wreaked so much havoc on corporate information systems. New research indicates this confidence is misplaced--the move to open standards such as Ethernet, Transmission Control Protocol/Internet Protocol, and Web technologies is allowing hackers to take advantage of the control industry's unawareness. Much of the available information about cyber incidents represents a characterization as opposed to an analysis of events. The lack of good analyses reflects an overall weakness in reporting requirements as well as the fact that to date there have been very few serious cyber attacks on control systems. Most companies prefer not to share cyber attack incident data because of potential financial repercussions. Uniform reporting requirements will do much to make this information available to Department of Homeland Security (DHS) and others who require it. This report summarizes the rise in frequency of cyber attacks, describes the perpetrators, and identifies the means of attack. This type of analysis, when used in conjunction with vulnerability analyses, can be used to support a proactive approach to prevent cyber attacks. CSSC will use this document to evolve a standardized approach to incident reporting and analysis. This document will be updated as needed to record additional event analyses and insights regarding incident reporting. This report represents 120 cyber security incidents documented in a number of sources, including: the British Columbia Institute of Technology (BCIT) Industrial Security Incident Database, the 2003 CSI/FBI Computer Crime and Security Survey, the KEMA, Inc., Database, Lawrence Livermore National Laboratory, the Energy Incident Database, the INL Cyber Incident Database, and other open-source data. The National Memorial Institute for the Prevention of Terrorism (MIPT) database was also interrogated but, interestingly, failed to yield any cyber attack incidents. The results of this evaluation indicate that historical evidence provides insight into control system related incidents or failures; however, that the limited available information provides little support to future risk estimates. The documented case history shows that activity has increased significantly since 1988. The majority of incidents come from the Internet by way of opportunistic viruses, Trojans, and worms, but a surprisingly large number are directed acts of sabotage. A substantial number of confirmed, unconfirmed, and potential events that directly or potentially impact control systems worldwide are also identified. Twelve selected cyber incidents are presented at the end of this report as examples of the documented case studies (see Appendix B).

  19. Ancillary service details: Voltage control

    SciTech Connect (OSTI)

    Kirby, B.; Hirst, E.

    1997-12-01T23:59:59.000Z

    Voltage control is accomplished by managing reactive power on an alternating-current power system. Reactive power can be produced and absorbed by both generation and transmission equipment. Reactive-power devices differ substantially in the magnitude and speed of response and in their capital costs. System operators, transmission owners, generators, customers, power marketers, and government regulators need to pay close attention to voltage control as they restructure the U.S. electricity industry. Voltage control can affect reliability and commerce in three ways: (1) Voltages must be maintained within an acceptable range for both customer and power-system equipment to function properly. (2) The movement of reactive power consumes transmission resources, which limits the ability to move real power and worsens congestion. (3) The movement of reactive power results in real-power losses. When generators are required to supply excessive amounts of reactive power, their real-power production must be curtailed. These opportunity costs are not currently compensated for in most regions. Current tariffs are based on embedded costs. These embedded-cost tariffs average about $0.51/MWh, equivalent to $1.5 billion annually for the United States as a whole. Although this cost is low when compared with the cost of energy, it still aggregates to a significant amount of money. This report takes a basic look at why the power system requires reactive power (an appendix explains the fundamentals of real and reactive power). The report then examines the various types of generation and transmission resources used to supply reactive power and to control voltage. Finally it discusses how these resources are deployed and paid for in several reliability regions around the country. As the U.S. electricity industry is restructured, the generation, transmission, and system-control equipment and functions that maintain voltages within the appropriate ranges are being deintegrated.

  20. Nuclear export and technology transfer controls

    SciTech Connect (OSTI)

    Hower, J.J.; Primeau, S.J. (Eagle Research Group, Inc., Arlington, VA (US))

    1988-01-01T23:59:59.000Z

    A review of the U.S. implementation of nuclear export and technology transfer controls is undertaken to assess whether the U.S. controls is undertaken to assess whether the U.S. controls meet the full scope of the international commitment toward non-proliferation controls. The international non-proliferation controls have been incorporated into CoCom, the Coordinating Committee of the multinational organization established to protect the mutual interests of the participating countries in the area of strategic export controls. However, this CoCom list is classified and each participating country implements these controls pursuant to its own laws. A comparison to the non-proliferation controls promulgated by the U.K. is used to verify that the U.S. controls are at least as comprehensive as the British controls.

  1. Parasitic load control system for exhaust temperature control

    DOE Patents [OSTI]

    Strauser, Aaron D. (Washington, IL); Coleman, Gerald N. (Peterborough, GB); Coldren, Dana R. (Fairbury, IL)

    2009-04-28T23:59:59.000Z

    A parasitic load control system is provided. The system may include an exhaust producing engine and a fuel pumping mechanism configured to pressurize fuel in a pressure chamber. The system may also include an injection valve configured to cause fuel pressure to build within the pressure chamber when in a first position and allow injection of fuel from the pressure chamber into one or more combustion chambers of the engine when in a second position. The system may further include a controller configured to independently regulate the pressure in the pressure chamber and the injection of fuel into the one or more combustion chambers, to increase a load on the fuel pumping mechanism, increasing parasitic load on the engine, thereby increasing a temperature of the exhaust produced by the engine.

  2. Control system for fluid heated steam generator

    DOE Patents [OSTI]

    Boland, James F. (Bonneville County, ID); Koenig, John F. (Idaho Falls, ID)

    1985-01-01T23:59:59.000Z

    A control system for controlling the location of the nucleate-boiling region in a fluid heated steam generator comprises means for measuring the temperature gradient (change in temperature per unit length) of the heating fluid along the steam generator; means for determining a control variable in accordance with a predetermined function of temperature gradients and for generating a control signal in response thereto; and means for adjusting the feedwater flow rate in accordance with the control signal.

  3. Control system for fluid heated steam generator

    DOE Patents [OSTI]

    Boland, J.F.; Koenig, J.F.

    1984-05-29T23:59:59.000Z

    A control system for controlling the location of the nucleate-boiling region in a fluid heated steam generator comprises means for measuring the temperature gradient (change in temperature per unit length) of the heating fluid along the steam generator; means for determining a control variable in accordance with a predetermined function of temperature gradients and for generating a control signal in response thereto; and means for adjusting the feedwater flow rate in accordance with the control signal.

  4. 32. M. R. Grant et al., Proc. Natl. Acad. Sci. U.S.A. 95, 15843 (1998).

    E-Print Network [OSTI]

    Galan, Jorge E

    1998-01-01T23:59:59.000Z

    demonstration in the 1870s that microbes were causal agents of disease. Since the initial discoveries by Koch (1 made in the post- genomic era will fuel our quest for develop- ing new strategies for disease control into their respective host cells to mimic, suppress, or modulate host defense signaling pathways and to en- hance

  5. Optimal Control Using an Algebraic Method for Control-Affine Nonlinear Systems

    E-Print Network [OSTI]

    Won, Chang-Hee

    of researchers have worked on the nonlinear optimal control problem, but they usually assume a linear systemOptimal Control Using an Algebraic Method for Control-Affine Nonlinear Systems Chang-Hee Won, 2007 Abstract A deterministic optimal control problem is solved for a control-affine nonlin- ear system

  6. Control and Analysis of Droop and Reverse Droop Controllers for Distributed Generations

    E-Print Network [OSTI]

    Vasquez, Juan Carlos

    Control and Analysis of Droop and Reverse Droop Controllers for Distributed Generations Dan Wu1 University, P. R. China ftang_nego@126.com Abstract--This paper addresses control and analysis of droop and reverse droop control for distributed generations (DG). The droop control is well known applied

  7. CDC-INV4104 Optimal Control of A ne Connection Control Systems: A

    E-Print Network [OSTI]

    Murray, Richard M.

    CDC-INV4104 Optimal Control of A ne Connection Control Systems: A Variational Approach J. Alexander we investigate the optimal control of a ne connection control systems. The formalism of the a ne-dimensional second-order system as a 2n-dimensional rst-order system and applying the machinery of optimal control

  8. Optimum Control Limits for Employing Statistical Process Control in Software Process

    E-Print Network [OSTI]

    Jalote, Pankaj

    . In this paper, we develop a cost model for employing control charts to software process using which optimum control limits can be determined. Our applications of the model suggest that, for quality controlOptimum Control Limits for Employing Statistical Process Control in Software Process Pankaj Jalote

  9. Controller design issues in the feedback control of radio frequency plasma processing reactors

    E-Print Network [OSTI]

    Kushner, Mark

    Controller design issues in the feedback control of radio frequency plasma processing reactors feedback control of inductively coupled plasma processing reactors for polysilicon etching and be successfully used for feedback control of plasma processing reactors.4 There are many control strate- gies

  10. Periodically Controlled Hybrid Systems Verifying A Controller for An Autonomous Vehicle

    E-Print Network [OSTI]

    Murray, Richard M.

    Periodically Controlled Hybrid Systems Verifying A Controller for An Autonomous Vehicle Tichakorn Hybrid Au- tomata (PCHA) for describing a class of hybrid control systems. In a PCHA, control actions of the planner-controller subsystem of an autonomous ground vehicle, and in deriving geometric properties

  11. Distributed PI-Control with Applications to Power Systems Frequency Control

    E-Print Network [OSTI]

    Johansson, Karl Henrik

    Distributed PI-Control with Applications to Power Systems Frequency Control Martin Andreasson12 to frequency control of power transmission systems. Sufficient stability criteria are derived, and it is shown. For systems where constant disturbances or model errors are present, PI-control is a commonly used control

  12. Autonomous grain combine control system

    DOE Patents [OSTI]

    Hoskinson, Reed L.; Kenney, Kevin L.; Lucas, James R.; Prickel, Marvin A.

    2013-06-25T23:59:59.000Z

    A system for controlling a grain combine having a rotor/cylinder, a sieve, a fan, a concave, a feeder, a header, an engine, and a control system. The feeder of the grain combine is engaged and the header is lowered. A separator loss target, engine load target, and a sieve loss target are selected. Grain is harvested with the lowered header passing the grain through the engaged feeder. Separator loss, sieve loss, engine load and ground speed of the grain combine are continuously monitored during the harvesting. If the monitored separator loss exceeds the selected separator loss target, the speed of the rotor/cylinder, the concave setting, the engine load target, or a combination thereof is adjusted. If the monitored sieve loss exceeds the selected sieve loss target, the speed of the fan, the size of the sieve openings, or the engine load target is adjusted.

  13. Heat engine generator control system

    DOE Patents [OSTI]

    Rajashekara, Kaushik (Carmel, IN); Gorti, Bhanuprasad Venkata (Towson, MD); McMullen, Steven Robert (Anderson, IN); Raibert, Robert Joseph (Fishers, IN)

    1998-01-01T23:59:59.000Z

    An electrical power generation system includes a heat engine having an output member operatively coupled to the rotor of a dynamoelectric machine. System output power is controlled by varying an electrical parameter of the dynamoelectric machine. A power request signal is related to an engine speed and the electrical parameter is varied in accordance with a speed control loop. Initially, the sense of change in the electrical parameter in response to a change in the power request signal is opposite that required to effectuate a steady state output power consistent with the power request signal. Thereafter, the electrical parameter is varied to converge the output member speed to the speed known to be associated with the desired electrical output power.

  14. Cold warriors target arms control

    SciTech Connect (OSTI)

    Isaacs, J.

    1995-09-01T23:59:59.000Z

    While disagreements over the conflict in Bosnia have strained US relations with Western Europe and Russia, these divisions will pale in comparison to the tensions that will arise if recent congressional arms control decisions become law. If the Republicans who dominate Congress are successful, a series of arms control agreements painstakingly negotiated by Republican and Democratic presidents could be consigned to the ash heap. This list includes the Start I and Start II nuclear reduction agreements, the 1972 Anti-Ballistic Missile (ABM) Treaty and the ongoing negotiations to achieve a comprehensive test ban (CTB) by 1996. US leadership in the post-Cold War era will undermined as the international community, already skeptical about this country`s direction, will question the ability of the executive branch to surmount isolantionist impulses.

  15. Nanoengineered membranes for controlled transport

    DOE Patents [OSTI]

    Doktycz, Mitchel J. (Oak Ridge, TN) [Oak Ridge, TN; Simpson, Michael L. (Knoxville, TN) [Knoxville, TN; McKnight, Timothy E. (Greenback, TN) [Greenback, TN; Melechko, Anatoli V. (Oak Ridge, TN) [Oak Ridge, TN; Lowndes, Douglas H. (Knoxville, TN) [Knoxville, TN; Guillorn, Michael A. (Knoxville, TN) [Knoxville, TN; Merkulov, Vladimir I. (Oak Ridge, TN) [Oak Ridge, TN

    2010-01-05T23:59:59.000Z

    A nanoengineered membrane for controlling material transport (e.g., molecular transport) is disclosed. The membrane includes a substrate, a cover definining a material transport channel between the substrate and the cover, and a plurality of fibers positioned in the channel and connected to an extending away from a surface of the substrate. The fibers are aligned perpendicular to the surface of the substrate, and have a width of 100 nanometers or less. The diffusion limits for material transport are controlled by the separation of the fibers. In one embodiment, chemical derivitization of carbon fibers may be undertaken to further affect the diffusion limits or affect selective permeability or facilitated transport. For example, a coating can be applied to at least a portion of the fibers. In another embodiment, individually addressable carbon nanofibers can be integrated with the membrane to provide an electrical driving force for material transport.

  16. Portal monitoring technology control process

    SciTech Connect (OSTI)

    York, R.L.

    1998-12-31T23:59:59.000Z

    Portal monitors are an important part of the material protection, control, and accounting (MPC and A) programs in Russia and the US. Although portal monitors are only a part of an integrated MPC and A system, they are an effective means of controlling the unauthorized movement of special nuclear material (SNM). Russian technical experts have gained experience in the use of SNM portal monitors from US experts ad this has allowed them to use the monitors more effectively. Several Russian institutes and companies are designing and manufacturing SNM portal monitors in Russia. Interactions between Russian and US experts have resulted in improvements to the instruments. SNM portal monitor technology has been effectively transferred from the US to Russia and should be a permanent part of the Russian MPC and A Program. Progress in the implementation of the monitors and improvements to how they are used are discussed.

  17. Heat engine generator control system

    DOE Patents [OSTI]

    Rajashekara, K.; Gorti, B.V.; McMullen, S.R.; Raibert, R.J.

    1998-05-12T23:59:59.000Z

    An electrical power generation system includes a heat engine having an output member operatively coupled to the rotor of a dynamoelectric machine. System output power is controlled by varying an electrical parameter of the dynamoelectric machine. A power request signal is related to an engine speed and the electrical parameter is varied in accordance with a speed control loop. Initially, the sense of change in the electrical parameter in response to a change in the power request signal is opposite that required to effectuate a steady state output power consistent with the power request signal. Thereafter, the electrical parameter is varied to converge the output member speed to the speed known to be associated with the desired electrical output power. 8 figs.

  18. Exhaust emission control and diagnostics

    DOE Patents [OSTI]

    Mazur, Christopher John; Upadhyay, Devesh

    2006-11-14T23:59:59.000Z

    A diesel engine emission control system uses an upstream oxidation catalyst and a downstream SCR catalyst to reduce NOx in a lean exhaust gas environment. The engine and upstream oxidation catalyst are configured to provide approximately a 1:1 ratio of NO to NO2 entering the downstream catalyst. In this way, the downstream catalyst is insensitive to sulfur contamination, and also has improved overall catalyst NOx conversion efficiency. Degradation of the system is determined when the ratio provided is no longer near the desired 1:1 ratio. This condition is detected using measurements of engine operating conditions such as from a NOx sensor located downstream of the catalysts. Finally, control action to adjust an injected amount of reductant in the exhaust gas based on the actual NO to NO2 ratio upstream of the SCR catalyst and downstream of the oxidation catalyst.

  19. Controlled shear/tension fixture

    DOE Patents [OSTI]

    Hsueh, Chun-Hway (Knoxville, TN); Liu, Chain-tsuan (Knoxville, TN); George, Easo P. (Knoxville, TN)

    2012-07-24T23:59:59.000Z

    A test fixture for simultaneously testing two material test samples is provided. The fixture provides substantially equal shear and tensile stresses in each test specimens. By gradually applying a load force to the fixture only one of the two specimens fractures. Upon fracture of the one specimen, the fixture and the load train lose contact and the second specimen is preserved in a state of upset just prior to fracture. Particular advantages of the fixture are (1) to control the tensile to shear load on the specimen for understanding the effect of these stresses on the deformation behavior of advanced materials, (2) to control the location of fracture for accessing localized material properties including the variation of the mechanical properties and residual stresses across the thickness of advanced materials, (3) to yield a fractured specimen for strength measurement and an unfractured specimen for examining the microstructure just prior to fracture.

  20. HCCI Engine Optimization and Control

    SciTech Connect (OSTI)

    Rolf D. Reitz

    2005-09-30T23:59:59.000Z

    The goal of this project was to develop methods to optimize and control Homogeneous-Charge Compression Ignition (HCCI) engines, with emphasis on diesel-fueled engines. HCCI offers the potential of nearly eliminating IC engine NOx and particulate emissions at reduced cost over Compression Ignition Direct Injection engines (CIDI) by controlling pollutant emissions in-cylinder. The project was initiated in January, 2002, and the present report is the final report for work conducted on the project through December 31, 2004. Periodic progress has also been reported at bi-annual working group meetings held at USCAR, Detroit, MI, and at the Sandia National Laboratories. Copies of these presentation materials are available on CD-ROM, as distributed by the Sandia National Labs. In addition, progress has been documented in DOE Advanced Combustion Engine R&D Annual Progress Reports for FY 2002, 2003 and 2004. These reports are included as the Appendices in this Final report.