National Library of Energy BETA

Sample records for kind online size

  1. Globus Online

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the HPSS system using Globus Online, you first need to create a Globus Online account. Once you've created an account you can log in either with your Globus Online information or...

  2. First-Of-Its-Kind Search Engine Will Speed Materials Research | Department

    Energy Savers [EERE]

    of Energy Of-Its-Kind Search Engine Will Speed Materials Research First-Of-Its-Kind Search Engine Will Speed Materials Research November 3, 2011 - 1:05pm Addthis Washington, D.C. - Researchers from the Department of Energy's (DOE's) Lawrence Berkeley National Laboratory (Berkeley Lab) and the Massachusetts Institute of Technology (MIT) jointly launched today a groundbreaking new online tool called the Materials Project, which operates like a "Google" of material properties,

  3. Globus Online

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Globus Online Globus Online Overview Globus Online addresses the challenges faced by researchers in moving, sharing, and archiving large volumes of data among distributed sites. With Globus Online, you hand-off data movement tasks to a hosted service that manages the entire operation, monitoring performance and errors, retrying failed transfers, correcting problems automatically whenever possible, and reporting status to keep you informed while you focus on your research. Command line and

  4. Globus Online

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Globus Onine Globus Online To access the HPSS system using Globus Online, you first need to create a Globus Online account. Once you've created an account you can log in either with your Globus Online information or with your NERSC account information. The first time you log in using your NERSC account you'll be asked to enter your Globus Online account information as well. Once you're logged in select "Start Transfer" (under "File Transfer"). This will take you to the file

  5. Small Modular Reactor: First of a Kind (FOAK) and Nth of a Kind (NOAK) Economic Analysis

    SciTech Connect (OSTI)

    Lauren M. Boldon; Piyush Sabharwall

    2014-08-01

    Small modular reactors (SMRs) refer to any reactor design in which the electricity generated is less than 300 MWe. Often medium sized reactors with power less than 700 MWe are also grouped into this category. Internationally, the development of a variety of designs for SMRs is booming with many designs approaching maturity and even in or nearing the licensing stage. It is for this reason that a generalized yet comprehensive economic model for first of a kind (FOAK) through nth of a kind (NOAK) SMRs based upon rated power, plant configuration, and the fiscal environment was developed. In the model, a particular project’s feasibility is assessed with regards to market conditions and by commonly utilized capital budgeting techniques, such as the net present value (NPV), internal rate of return (IRR), Payback, and more importantly, the levelized cost of energy (LCOE) for comparison to other energy production technologies. Finally, a sensitivity analysis was performed to determine the effects of changing debt, equity, interest rate, and conditions on the LCOE. The economic model is primarily applied to the near future water cooled SMR designs in the United States. Other gas cooled and liquid metal cooled SMR designs have been briefly outlined in terms of how the economic model would change. FOAK and NOAK SMR costs were determined for a site containing seven 180 MWe water cooled SMRs and compared to a site containing one 1260 MWe reactor. With an equal share of debt and equity and a 10% cost of debt and equity, the LCOE was determined to be $79 $84/MWh and $80/MWh for the SMR and large reactor sites, respectively. With a cost of equity of 15%, the SMR LCOE increased substantially to $103 $109/MWh. Finally, an increase in the equity share to 70% at the 15% cost of equity resulted in an even higher LCOE, demonstrating the large variation in results due to financial and market factors. The NPV and IRR both decreased with increasing LCOE. Unless the price of electricity increases along with the LCOE, the projects may become unprofitable. This is the case at the LCOE of $103 $109/MW, in which the NPV became negative. The IRR increased with increasing electricity price. Three cases, electric only base, storage—compressed air energy storage or pumped hydro, and hydrogen production, were performed incorporating SMRs into a nuclear wind natural gas hybrid energy system for the New York West Central region. The operational costs for three cases were calculated as $27/MWh, $25/MWh, and $28/MWh, respectively. A 3% increase in profits was demonstrated for the storage case over the electric only base case.

  6. Three Companies Awarded Contracts for Royalty-in-Kind Exchanges...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Companies Awarded Contracts for Royalty-in-Kind Exchanges for the SPR Three Companies Awarded Contracts for Royalty-in-Kind Exchanges for the SPR November 8, 2007 - 4:31pm Addthis ...

  7. Online Forms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Microfabrication | Safety Online Forms, Guidelines & Policies Questions of How to Get Started? - Click here! User Forms: Beamtime Request Form - pdf CAMD Gas Cylinder Request Form - pdf Compressed Gas Purchase Order - pdf Exposure Request Form - pdf (How To Fill the Exposure Request Form?) Format for Annual User Reports - pdf Microfabrication Project Proposal Form - pdf Synchrotron Project Proposal Form - pdf Registration & Test Application for Facility Access & Radiation Badge - pdf

  8. Online Resources

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Online Resources Fusion and Plasma Physics Fusion Energy Education FuseEdWeb: Fusion Energy Education A Webby-award-winning site sponsored by LLNL and the Princeton Plasma Physics Laboratory with information and links to the world of fusion and plasma physics. General Atomics Fusion Education General Atomics Fusion Education Fusion education resources for teachers and students from General Atomics. Lasers and Photon Science Optics for Kids Optics 4 Kids Learn about optics-the "science of

  9. Kindness Intelligence Solar Service KIS | Open Energy Information

    Open Energy Info (EERE)

    navigation, search Name: Kindness Intelligence Solar Service (KIS) Place: Nagano-Ken, Japan Zip: 385-0051 Product: Manufacturer of PV silicon modules. Coordinates: 36.11441,...

  10. Online Tutorials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tutorials Online Tutorials Cybersecurity Tutorial This course is designed to remind you of your basic security responsibilities as a user of NERSC resources, and to provide you with actions you can take to protect your scientific work. Read More » Using the DDT Debugger Video Tutorial February 11, 2011 Getting started using the DDT debugger on Hopper. Read More » Introduction to Scientific I/O This tutorial will help you understand and improve your I/O operations on NERSC systems. Read More »

  11. Accessing Online COR Training

    Broader source: Energy.gov [DOE]

    Contracting Officer’s Representative (COR) training is now be available in an online format. "Accessing Online COR Training" provides a step-by-step guide to access the online COR course. 

  12. Air Force Generic In-Kind Consideration Trust Agreement | Open...

    Open Energy Info (EERE)

    Trust Agreement Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: Air Force Generic In-Kind Consideration Trust AgreementLegal Abstract...

  13. Air Force Generic In-Kind Consideration Delivery Agreement |...

    Open Energy Info (EERE)

    Delivery Agreement Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: Air Force Generic In-Kind Consideration Delivery AgreementLegal...

  14. In kind? contributions are non-cash resources employed by...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    support or performance of tasks for a CRADA or a Project Task Statement (PTS) under an Umbrella CRADA. In- kind contributions must apply directly to the CRADA or PTS at hand,...

  15. Researchers Discover a New Kind of Neutrino Transformation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Researchers Discover a New Kind of Neutrino Transformation Researchers Discover a New Kind of Neutrino Transformation NERSC, ESnet and computational scientists help researchers discover how neutrinos flavor-shift as they travel at near light-speed March 8, 2012 Linda Vu, lvu@lbl.gov, +1 510 495 2402 Daya Bay Neutrino Facility in China. Photo by: Roy Kaltschmidt, Lawrence Berkeley National Laboratory. Neutrinos, the wispy particles that flooded the universe in the earliest moments after the Big

  16. Pennsylvania: Window Technology First of Its Kind for Commercial Buildings

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    | Department of Energy Window Technology First of Its Kind for Commercial Buildings Pennsylvania: Window Technology First of Its Kind for Commercial Buildings November 8, 2013 - 12:00am Addthis Windows play a significant role in a building's energy use; in 2010, 2.55 quads of energy were lost through windows-the equivalent of more than 20 billion gallons of gasoline. In support of DOE's goal to reduce energy consumption in buildings by 50% by 2030, EERE utilized $1.3 million of Recovery Act

  17. Estimating design costs for first-of-a-kind projects

    SciTech Connect (OSTI)

    Banerjee, Bakul; /Fermilab

    2006-03-01

    Modern scientific facilities are often outcomes of projects that are first-of-a-kind, that is, minimal historical data are available for project costs and schedules. However, at Fermilab, there was an opportunity to execute two similar projects consecutively. In this paper, a comparative study of the design costs for these two projects is presented using earned value methodology. This study provides some insights into how to estimate the cost of a replicated project.

  18. All kinds of jobs increasingly depend on STEM skills

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    STEM skills Community Connections: Your link to news and opportunities from Los Alamos National Laboratory Latest Issue:Mar. 2016 all issues All Issues » submit All kinds of jobs increasingly depend on STEM skills New Mexico's students still plagued by STEM gap December 1, 2015 Members of the STEM Action Team update the New Mexico Legislative Education Study Committee on the state of science, technology, engineering and math education in New Mexico. Members of the STEM Action Team update the

  19. PHOENIX - PNNL Hanford Online Environmental Information Exchange - Hanford

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Site PHOENIX - Hanford Site Data About Us PHOENIX - PNNL Hanford Online Environmental Information Exchange Email Email Page | Print Print Page |Text Increase Font Size Decrease Font Size NEW! PNNL just launched the latest addition to the PHOENIX Web Application - PHOENIX Tanks! Click the button at the bottom of this page to go to PHOENIX Tanks. The PNNL Hanford Online Environmental Information Exchange (PHOENIX) was launched to improve public access to public data and to enhance decision

  20. Broward County Online Solar Permitting

    Broader source: Energy.gov [DOE]

    Broward County now offers Go SOLAR Online Permitting*, for rooftop solar photovoltaic system permitting. This online permitting system may be used for residential or low commercial properties that...

  1. hosting-transims-online

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Hosting the TRANSIMS Online Community Scott B. Smith, Ph.D. US DOT RITA Volpe Center ... You need JavaScript enabled to view it. List of Authors ... Scott Smith ...

  2. Influence of heterogeneity on second-kind self-similar solutions...

    Office of Scientific and Technical Information (OSTI)

    Influence of heterogeneity on second-kind self-similar solutions for viscous gravity currents Citation Details In-Document Search Title: Influence of heterogeneity on second-kind...

  3. Online Abstracts and Reports

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Wind Energy/Resources/Wind Energy Publications/Online Abstracts and Reports - Online Abstracts and ReportsTara Camacho-Lopez2015-05-14T14:49:39+00:00 Active Aero Blade Load Control Design [Report] (2771KB PDF) "SMART Wind Turbine Rotor: Data Analysis and Conclusions" J.C. Berg, M. F. Barone, N. C. Yoder January 2014 [intlink id="2916" type="page"] Back to Topic Selection[/intlink] [intlink id="3057" type="page" anchor="TOP"]Top of

  4. First-of-its-Kind Carbon Capture and Conversion Demonstration Technology

    Office of Environmental Management (EM)

    Opening in Texas | Department of Energy First-of-its-Kind Carbon Capture and Conversion Demonstration Technology Opening in Texas First-of-its-Kind Carbon Capture and Conversion Demonstration Technology Opening in Texas October 21, 2014 - 4:00am Addthis News Media Contact 202-586-4940 First-of-its-Kind Carbon Capture and Conversion Demonstration Technology Opening in Texas Department of Energy Supported Project to Find Innovative Uses for Carbon WASHINGTON - Today, the Department of Energy

  5. First-of-a-Kind Sequestration Field Test Begins in West Virginia |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy First-of-a-Kind Sequestration Field Test Begins in West Virginia First-of-a-Kind Sequestration Field Test Begins in West Virginia September 8, 2009 - 1:00pm Addthis Washington, DC - Injection of carbon dioxide (CO2) began today in a first-of-a-kind field trial of enhanced coalbed methane recovery with simultaneous CO2 sequestration in an unmineable coal seam. The ultimate goal of the U.S. Department of Energy-sponsored project is to help mitigate climate change by

  6. What Kind of Green Jobs Most Interest You? | Department of Energy

    Energy Savers [EERE]

    What kind of green jobs most interest you? Each Thursday, you have the chance to share your thoughts on a question about energy efficiency or renewable energy for consumers. Please ...

  7. Construction Begins on First-of-its-Kind Advanced Clean Coal Electric

    Energy Savers [EERE]

    Generating Facility | Department of Energy Construction Begins on First-of-its-Kind Advanced Clean Coal Electric Generating Facility Construction Begins on First-of-its-Kind Advanced Clean Coal Electric Generating Facility September 10, 2007 - 3:16pm Addthis ORLANDO, Fla. - Officials representing the U.S. Department of Energy (DOE), Southern Company, KBR Inc. and the Orlando Utilities Commission (OUC) today broke ground to begin construction of an advanced 285-megawatt integrated

  8. No, Not That Kind of Hacking. Supporting Energy Data Innovation at

    Office of Environmental Management (EM)

    Hackathons | Department of Energy No, Not That Kind of Hacking. Supporting Energy Data Innovation at Hackathons No, Not That Kind of Hacking. Supporting Energy Data Innovation at Hackathons October 12, 2012 - 5:18pm Addthis Developers at Tech Crunch Disrupt SF 2012. Developers at Tech Crunch Disrupt SF 2012. Ian Kalin Director of the Energy Data Initiative Earlier this year, the administration launched the Energy Data Initiative to improve access to energy data and encourage innovation while

  9. Nobel Lecture Videos Now Available Online

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lecture Series Videos Now Available Online Nobel Lecture Videos Now Available Online May 29, 2014 by Kathy Kincade Three of the NERSC Nobel Lecture Series videos -- featuring John...

  10. GOLD: The Genomes Online Database

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Kyrpides, Nikos; Liolios, Dinos; Chen, Amy; Tavernarakis, Nektarios; Hugenholtz, Philip; Markowitz, Victor; Bernal, Alex

    Since its inception in 1997, GOLD has continuously monitored genome sequencing projects worldwide and has provided the community with a unique centralized resource that integrates diverse information related to Archaea, Bacteria, Eukaryotic and more recently Metagenomic sequencing projects. As of September 2007, GOLD recorded 639 completed genome projects. These projects have their complete sequence deposited into the public archival sequence databases such as GenBank EMBL,and DDBJ. From the total of 639 complete and published genome projects as of 9/2007, 527 were bacterial, 47 were archaeal and 65 were eukaryotic. In addition to the complete projects, there were 2158 ongoing sequencing projects. 1328 of those were bacterial, 59 archaeal and 771 eukaryotic projects. Two types of metadata are provided by GOLD: (i) project metadata and (ii) organism/environment metadata. GOLD CARD pages for every project are available from the link of every GOLD_STAMP ID. The information in every one of these pages is organized into three tables: (a) Organism information, (b) Genome project information and (c) External links. [The Genomes On Line Database (GOLD) in 2007: Status of genomic and metagenomic projects and their associated metadata, Konstantinos Liolios, Konstantinos Mavromatis, Nektarios Tavernarakis and Nikos C. Kyrpides, Nucleic Acids Research Advance Access published online on November 2, 2007, Nucleic Acids Research, doi:10.1093/nar/gkm884]

    The basic tables in the GOLD database that can be browsed or searched include the following information:

    • Gold Stamp ID
    • Organism name
    • Domain
    • Links to information sources
    • Size and link to a map, when available
    • Chromosome number, Plas number, and GC content
    • A link for downloading the actual genome data
    • Institution that did the sequencing
    • Funding source
    • Database where information resides
    • Publication status and information

    (Specialized Interface)

  11. Edison Job Size Charts

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Job Size Charts Edison Job Size Charts Fraction of Hours Used per Job Size This chart shows the fraction of hours used on Edison in each of 5 job-core-size bins. 2015 Usage by Job Size Chart 2014 Fraction of Hours Used by Big Jobs This chart shows the fraction of hours used on Edison by jobs using 16,384 or more cores. 2015 Usage by Job Size Chart 2014 Last edited: 2015-02-18 16:06:26

  12. Berkeley Lab's New Computing Sciences Facility Features First-of-Its-Kind

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Seismic Floor Berkeley Lab's New Computing Sciences Facility Features First-of-Its-Kind Seismic Floor Berkeley Lab's New Computing Sciences Facility Features First-of-Its-Kind Seismic Floor November 9, 2015 Contact: Kathy Kincade, +1 510 495 2124, kkincade@lbl.gov CRT When the new Shyh Wang Hall building at Lawrence Berkeley National Laboratory (Berkeley Lab) is officially unveiled November 12, one of its most unique features will not be on display. In fact, it is tucked away beneath the

  13. Save Energy, Cut Costs, and Bring a Different Kind of Value to Work |

    Energy Savers [EERE]

    Department of Energy Energy, Cut Costs, and Bring a Different Kind of Value to Work Save Energy, Cut Costs, and Bring a Different Kind of Value to Work June 1, 2010 - 7:30am Addthis Amy Foster Parish For many of us, thinking about energy efficiency means thinking about changes we can make at home. But residential energy efficiency is just one slice of the energy use pie. According to data from the Energy Information Administration, energy use in the residential and commercial sectors is neck

  14. EERE Success Story-Pennsylvania: Window Technology First of Its Kind for

    Office of Environmental Management (EM)

    Commercial Buildings | Department of Energy Window Technology First of Its Kind for Commercial Buildings EERE Success Story-Pennsylvania: Window Technology First of Its Kind for Commercial Buildings November 8, 2013 - 12:00am Addthis Windows play a significant role in a building's energy use; in 2010, 2.55 quads of energy were lost through windows-the equivalent of more than 20 billion gallons of gasoline. In support of DOE's goal to reduce energy consumption in buildings by 50% by 2030,

  15. Sec. Chu Online Town Hall

    Broader source: Energy.gov [DOE]

    Secretary Steven Chu hosted an online town hall to discuss the clean energy and innovation agenda President Obama laid out in his 2011 State of the Union address. (January 26, 2011)

  16. JOBAID-LAUNCHING ONLINE CONTENT

    Broader source: Energy.gov [DOE]

    In this jobaid you will learn how to launch Online Content "Items" or Courses. In the LMS you can launch most anything as an "item": documents, courses, webpages and track users that have completed...

  17. Groundwater Report Goes Online, Interactive

    Broader source: Energy.gov [DOE]

    RICHLAND, Wash. – EM’s Richland Operations Office (RL) has moved its 1,200-page annual report on groundwater monitoring to a fully online and interactive web application.

  18. User Experience Research Online Tools

    Broader source: Energy.gov [DOE]

    The Office of Energy Efficiency and Renewable Energy (EERE) has a variety of online tools to help you conduct user experience (UX) research. The following tools are free for use by staff and contractors who work on the EERE website.

  19. Hopper Job Size Charts

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Job Size Charts Hopper Job Size Charts Fractional Jobs The following charts show the fraction of hours used on Hopper in each of five job-core-size bins: 2014 Usage by Job Size Chart 2013 2012 2011 Large Jobs The following charts show the fraction of hours used on Hopper by jobs using greater than 16,384 cores: 2014 2013 2012 Usage by Job Size Chart 2011 Last edited: 2014-12-22 12:16:26

  20. Identifying Differences in Cultural Behavior in Online Groups

    SciTech Connect (OSTI)

    Gregory, Michelle L.; Engel, David W.; Bell, Eric B.; Mcgrath, Liam R.

    2012-07-23

    We have developed methods to identify online communities, or groups, using a combination of structural information variables and content information variables from weblog posts and their comments to build a characteristic footprint for groups. We have worked with both explicitly connected groups and 'abstract' groups, in which the connection between individuals is in interest (as determined by content based features) and behavior (metadata based features) as opposed to explicit links. We find that these variables do a good job at identifying groups, placing members within a group, and helping determine the appropriate granularity for group boundaries. The group footprint can then be used to identify differences between the online groups. In the work described here we are interested in determining how an individual's online behavior is influenced by their membership in more than one group. For example, individuals belong to a certain culture; they may belong as well to a demographic group, and other 'chosen' groups such as churches or clubs. There is a plethora of evidence surrounding the culturally sensitive adoption, use, and behavior on the Internet. In this work we begin to investigate how culturally defined internet behaviors may influence behaviors of subgroups. We do this through a series of experiments in which we analyze the interaction between culturally defined behaviors and the behaviors of the subgroups. Our goal is to (a) identify if our features can capture cultural distinctions in internet use, and (b) determine what kinds of interaction there are between levels and types of groups.

  1. First-of-a-kind supercomputer at Lawrence Livermore available for

    National Nuclear Security Administration (NNSA)

    collaborative research | National Nuclear Security Administration First-of-a-kind supercomputer at Lawrence Livermore available for collaborative research | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Countering Nuclear Terrorism About Our Programs Our History Who We Are Our Leadership Our Locations Budget Our

  2. Sandia Labs high-flux solar simulator with one-of-a-kind capability

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    high-flux solar simulator with one-of-a-kind capability - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Fuel Cycle Defense

  3. NREL: Solar Research - NREL and Partners Demonstrate First-of-a-Kind Use of

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Utility-Scale PV for Ancillary Services and Partners Demonstrate First-of-a-Kind Use of Utility-Scale PV for Ancillary Services Demonstration project shows utility-scale photovoltaic plants that incorporate "grid-friendly" controls can contribute to grid stability and reliability. January 28, 2016 While utility-scale solar photovoltaic (PV) power plants are being increasingly deployed across the country, some believe higher penetrations of PV technologies may potentially impact

  4. NREL: Technology Transfer - NREL and Partners Demonstrate First-of-a-Kind

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Use of Utility-Scale PV for Ancillary Services and Partners Demonstrate First-of-a-Kind Use of Utility-Scale PV for Ancillary Services Demonstration project shows utility-scale photovoltaic plants that incorporate "grid-friendly" controls can contribute to grid stability and reliability. January 28, 2016 While utility-scale solar photovoltaic (PV) power plants are being increasingly deployed across the country, some believe higher penetrations of PV technologies may potentially

  5. ANSER Center Chemists Design a First-of-its-Kind Solar Cell Experiment for

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    General Chemistry Students | ANSER Center | Argonne-Northwestern National Laboratory ANSER Center Chemists Design a First-of-its-Kind Solar Cell Experiment for General Chemistry Students Home > News & Events > ANSER Chemists Design First Solar Cell Lab for Gen Chem Students ANSER Center Chemists Design First Solar Cell Lab for General Chemistry Students by Monika Wnuk Northwestern scientists, Sameer Patwardhan and Duyen Cao, from the Argonne-Northwestern Solar Energy Research

  6. Photovoltaic Online Training Course for Code Officials

    Broader source: Energy.gov [DOE]

    The Photovoltaic Online Training Course for Code Officials is a free online training tool for those officials who conduct reviews and inspections of residential PV systems. Throughout the course's...

  7. Online Application Process | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Online Application Process How to apply NETL uses an online process to apply for most of our jobs. You can access our job listings through USAJOBS. You can browse jobs; but before...

  8. Cybersecurity Online Learning (COL) | Department of Energy

    Energy Savers [EERE]

    Services » Training » Cybersecurity Training Warehouse » DOE Training & Education » Cybersecurity Online Learning (COL) Cybersecurity Online Learning (COL) chalkboard-218593__180.jpg Cybersecurity Online Learning (COL) is a free online learning program offering both live and recorded cybersecurity training sessions or workshops. The live sessions are limited to 100 attendees; recorded sessions are available 2 weeks after the live session. You must possess Adobe Connect software and a

  9. Electronic Document Online Correspondence and Concurrence System

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    (eDOCS),Office of the Executive Secretariat | Department of Energy Online Correspondence and Concurrence System (eDOCS),Office of the Executive Secretariat Electronic Document Online Correspondence and Concurrence System (eDOCS),Office of the Executive Secretariat Electronic Document Online Correspondence and Concurrence System (eDOCS),Office of the Executive Secretariat PDF icon Electronic Document Online Correspondence and Concurrence System (eDOCS),Office of the Executive Secretariat More

  10. What Kind of Energy Widgets Would Be Useful to You? | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    On Tuesday, you read about some ways you can share information from Energy Savers. One tool Energy Savers is experimenting with is widgets, which allows you to share bits of our content with your blog or Web site visitors. We currently have two widgets: one for our blog and one with energy-saving tips. Are there others that you'd like to see? We've tossed around widget ideas such as maps and calculators, but we'd like to know what you think. What kind of energy widgets would be useful to you?

  11. Influence of heterogeneity on second-kind self-similar solutions for viscous gravity currents

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Zheng, Zhong; Christov, Ivan  C.; Stone, Howard  A.

    2014-04-16

    We report experimental, theoretical and numerical results on the effects of horizontal heterogeneities on the propagation of viscous gravity currents. We use two geometries to highlight these effects: (a) a horizontal channel (or crack) whose gap thickness varies as a power-law function of the streamwise coordinate; (b) a heterogeneous porous medium whose permeability and porosity have power-law variations. We demonstrate that two types of self-similar behaviours emerge as a result of horizontal heterogeneity: (a) a first-kind self-similar solution is found using dimensional analysis (scaling) for viscous gravity currents that propagate away from the origin (a point of zero permeability); (b)more » a second-kind self-similar solution is found using a phase-plane analysis for viscous gravity currents that propagate toward the origin. These theoretical predictions, obtained using the ideas of self-similar intermediate asymptotics, are compared with experimental results and numerical solutions of the governing partial differential equation developed under the lubrication approximation. All three results are found to be in good agreement.« less

  12. Influence of heterogeneity on second-kind self-similar solutions for viscous gravity currents

    SciTech Connect (OSTI)

    Zheng, Zhong; Christov, Ivan  C.; Stone, Howard  A.

    2014-04-16

    We report experimental, theoretical and numerical results on the effects of horizontal heterogeneities on the propagation of viscous gravity currents. We use two geometries to highlight these effects: (a) a horizontal channel (or crack) whose gap thickness varies as a power-law function of the streamwise coordinate; (b) a heterogeneous porous medium whose permeability and porosity have power-law variations. We demonstrate that two types of self-similar behaviours emerge as a result of horizontal heterogeneity: (a) a first-kind self-similar solution is found using dimensional analysis (scaling) for viscous gravity currents that propagate away from the origin (a point of zero permeability); (b) a second-kind self-similar solution is found using a phase-plane analysis for viscous gravity currents that propagate toward the origin. These theoretical predictions, obtained using the ideas of self-similar intermediate asymptotics, are compared with experimental results and numerical solutions of the governing partial differential equation developed under the lubrication approximation. All three results are found to be in good agreement.

  13. Does size matter?

    SciTech Connect (OSTI)

    Carreras, B. A.; Physics Department, College of Natural Science and Mathematics and Geophysical Institute, University of Alaska, Fairbanks, Alaska 99775; Physics Department, Universidad Carlos III de Madrid, Madrid ; Newman, D. E.; Dobson, Ian

    2014-06-15

    Failures of the complex infrastructures society depends on having enormous human and economic cost that poses the question: Are there ways to optimize these systems to reduce the risks of failure? A dynamic model of one such system, the power transmission grid, is used to investigate the risk from failure as a function of the system size. It is found that there appears to be optimal sizes for such networks where the risk of failure is balanced by the benefit given by the size.

  14. Preconditioning first and second kind integral formulations of the capacitance problem

    SciTech Connect (OSTI)

    Tausch, J.; White, J.

    1996-12-31

    Engineering programs which compute electrostatic capacitances for complicated arrangements of conductors commonly set up the electrostatic potential u as a superposition of surface carges {sigma} u(x) = {integral}{sub s}G(x, y){sigma}(y) dS(y). Where G(x, y) = {1/4}{pi}{vert_bar}x - y{vert_bar} is the Green`s function for the Laplacian in the three-space. For a specified potential on the conductor surface(s) S, this approach leads to an integral equation of the first kind on S for the charge density {sigma}. The capacitance is the net-charge on the conductors and is given by the surface integral of {sigma}.

  15. Online Learning Center | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Online Learning Center Online Learning Center Online Learning Center Whether you're looking to discover new learning opportunities, better manage your career, request external training or connect your employees with the learning they need, OLC provides new features and services to help. Fulfill your training needs with ease and save money on travel and training costs Explore the enhanced catalog and complete a course at your own pace to stay abreast in the latest technology, science

  16. Information, Planning, and Conservation (IPAC) online screening...

    Open Energy Info (EERE)

    Information, Planning, and Conservation (IPAC) online screening tool Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: Information,...

  17. A New Kind of Column Materials for Gas Chromatographic Hydrogen Isotope Separation

    SciTech Connect (OSTI)

    Hara, M.; Shima, H.; Akamaru, S.; Abe, T.; Matsuyama, M.; Watanabe, K.

    2005-07-15

    A new kind of materials that can be applied to a gas chromatographic hydrogen isotope separation system was developed to reduce the amount of Pd-Pt alloy required for making the column and to improve the separation efficiency. Pd and Pt were deposited on {alpha}-Al{sub 2}O{sub 3} powder by using a barrel sputtering system. Prepared sample powder was characterized from surface morphology, element distributions on the surface, composition and crystallinity. The characterization showed that a uniform layer of Pd-Pt alloy with expected composition was formed on Al{sub 2}O{sub 3} particles. The crystallinity, however, was poor, but improved after annealing at 1073 K for 2 hours. The hydrogen absorbing behavior was also improved by the annealing. A separation column was prepared from the annealed powder and was subjected to experiments on hydrogen isotope separation. The column of annealed powder gave considerably good separation efficiency around room temperature, in spite that only 0.35 g of Pd-Pt was used for the column. The amount of Pd-Pt alloy used here should be compared to previous results, where 1.5 g of Pd-Pt powder was required for high separation efficiency. The new material was quite effective to reduce the amount of Pd-Pt alloy without compromising the separation efficiency and can give further improvement.

  18. Aerosol mobility size spectrometer

    DOE Patents [OSTI]

    Wang, Jian (Port Jefferson, NY); Kulkarni, Pramod (Port Jefferson Station, NY)

    2007-11-20

    A device for measuring aerosol size distribution within a sample containing aerosol particles. The device generally includes a spectrometer housing defining an interior chamber and a camera for recording aerosol size streams exiting the chamber. The housing includes an inlet for introducing a flow medium into the chamber in a flow direction, an aerosol injection port adjacent the inlet for introducing a charged aerosol sample into the chamber, a separation section for applying an electric field to the aerosol sample across the flow direction and an outlet opposite the inlet. In the separation section, the aerosol sample becomes entrained in the flow medium and the aerosol particles within the aerosol sample are separated by size into a plurality of aerosol flow streams under the influence of the electric field. The camera is disposed adjacent the housing outlet for optically detecting a relative position of at least one aerosol flow stream exiting the outlet and for optically detecting the number of aerosol particles within the at least one aerosol flow stream.

  19. Online Legal Resources | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Resources » Online Legal Resources Online Legal Resources Legislative Documents US Code Public and Private Laws Congressional Bills Congressional Record Congressional Hearings Appropriations Legislation Regulatory Documents Code of Federal Regulations Federal Register DOE Safety and Employee Protection Authorities Presidential Documents Executive Orders More Legal Research Resources Energy Law Net Legal Citation Style Guide Nuclear Regulatory Legislation Open CRS Public Library of Law Treaties

  20. ARM - Measurement - Cloud droplet size

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    droplet size Linear size (e.g. radius or diameter) of a cloud particle Categories Cloud Properties Instruments The above measurement is considered scientifically relevant for the...

  1. Online Monitoring of Induction Motors

    SciTech Connect (OSTI)

    McJunkin, Timothy R.; Agarwal, Vivek; Lybeck, Nancy Jean

    2016-01-01

    The online monitoring of active components project, under the Advanced Instrumentation, Information, and Control Technologies Pathway of the Light Water Reactor Sustainability Program, researched diagnostic and prognostic models for alternating current induction motors (IM). Idaho National Laboratory (INL) worked with the Electric Power Research Institute (EPRI) to augment and revise the fault signatures previously implemented in the Asset Fault Signature Database of EPRI’s Fleet Wide Prognostic and Health Management (FW PHM) Suite software. Induction Motor diagnostic models were researched using the experimental data collected by Idaho State University. Prognostic models were explored in the set of literature and through a limited experiment with 40HP to seek the Remaining Useful Life Database of the FW PHM Suite.

  2. NERSC Online Training May 3: Navigating NERSC File Systems

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Online Training May 3: Navigating NERSC File Systems NERSC Online Training May 3: Navigating NERSC File Systems April 26, 2011 by Richard Gerber A NERSC training event, "Navigating...

  3. New Online Tools Showcase Efficient Technologies and Deployment...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    New Online Tools Showcase Efficient Technologies and Deployment Case Studies New Online Tools Showcase Efficient Technologies and Deployment Case Studies September 29, 2015 -...

  4. FERC Online eLibrary | Open Energy Information

    Open Energy Info (EERE)

    Not Provided DOI Not Provided Check for DOI availability: http:crossref.org Online Internet link for FERC Online eLibrary Citation Federal Energy Regulatory Commission. FERC...

  5. Nevada Division of Environmental Protection online NOI system...

    Open Energy Info (EERE)

    2012 DOI Not Provided Check for DOI availability: http:crossref.org Online Internet link for Nevada Division of Environmental Protection online NOI system Citation...

  6. DOE Jobs Online (Hiring Manager), Office of Human Capitol Management...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Jobs Online (Hiring Manager), Office of Human Capitol Management Innovation and Solutions DOE Jobs Online (Hiring Manager), Office of Human Capitol Management Innovation and...

  7. Online optimization of storage ring nonlinear beam dynamics ...

    Office of Scientific and Technical Information (OSTI)

    Online optimization of storage ring nonlinear beam dynamics Citation Details In-Document Search Title: Online optimization of storage ring nonlinear beam dynamics Authors: Huang,...

  8. Online optimization of storage ring nonlinear beam dynamics ...

    Office of Scientific and Technical Information (OSTI)

    Online optimization of storage ring nonlinear beam dynamics Citation Details In-Document Search Title: Online optimization of storage ring nonlinear beam dynamics You are...

  9. Online SAG Mill Pluse Measurement and Optimization

    SciTech Connect (OSTI)

    Raj Rajamani; Jose Delgadillo; Vishal Duriseti

    2007-06-30

    The grinding efficiency of semi autogenous milling or ball milling depends on the tumbling motion of the total charge within the mill. Utilization of this tumbling motion for efficient breakage of particles depends on the conditions inside the mill. However, any kind of monitoring device to measure the conditions inside the mill shell during operation is virtually impossible due to the severe environment presented by the tumbling charge. An instrumented grinding ball, which is capable of surviving a few hours and transmitting the impacts it experiences, is proposed here. The spectrum of impacts collected over 100 revolutions of the mills presents the signature of the grinding environment inside mill. This signature could be effectively used to optimize the milling performance by investigating this signature's relation to mill product size, mill throughput, make-up ball size, mill speed, liner profile and ball addition rates. At the same time, it can also be used to design balls and liner systems that can survive longer in the mill. The technological advances made in electronics and communication makes this leap in instrumentation certainly viable. Hence, the instrumented grinding ball offers the ability to qualitatively observe and optimize the milling environment. An instrumented load cell package that can measure the force of impacts inside the grinding chamber of a mill is developed here. The signal from the instrumented load cell package is interpreted in terms of a histogram termed as an impact spectrum which is a plot of the number of impacts at a specific energy level against the energy. It reflects on the average force regime of the mill. The instrumented load cell package was calibrated against the ultra fast load cell which has been unanimously accepted as a standard to measure single breakage events. The load cell package was successfully used to produce impact spectra in an 8.5 inch lab scale mill. The mill speed and the ball size were varied to study their effect on the impact spectra. A good correlation was found between the process variables and the impact spectra. The load cell package was then used in a 16 inch pilot scale mill. The mill speed, ball size, and mill filling were varied here and a consistent trend between these variables and impact spectra was observed. With a better understanding developed from the initial tests, the design of the load cell package was significantly changed to eliminate noise. With the new design, the impact spectra were re-determined in the 16 inch pilot mill varying the process variables - ball size, mill speed, and mill filling. Finally, it is successfully shown that a change in the operating variables of a mill can be seen in the impact spectra and that this concept can be successfully developed to monitor the grinding operation of industrial mills. To adapt it to industrial level it is mandatory to make the load cell package wireless. A design of a wireless circuit that is capable of transferring data at the required speed of 1000 kbps was also developed and tested at Cortez Gold Mines (CGM), Nevada.

  10. Peer Review Presentations Now Available Online

    Broader source: Energy.gov [DOE]

    The Bioenergy Technologies Office (BETO) hosted the 2015 Project Peer Review from March 23–27, 2015 in Alexandria, Virginia. The individual project and plenary presentations from the week are now available online.

  11. On-line chemical composition analyzer development

    SciTech Connect (OSTI)

    Garrison, A.A.

    1993-01-01

    This report relates to the development of an on-line Raman analyzer for control of a distillation column. It is divided into: program issues, experimental control system evaluation, energy savings analysis, and reliability analysis. (DLC)

  12. P Stub Online, Bechtel Jacobs Company, LLC | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    P Stub Online, Bechtel Jacobs Company, LLC P Stub Online, Bechtel Jacobs Company, LLC P Stub Online, Bechtel Jacobs Company, LLC PDF icon P Stub Online, Bechtel Jacobs Company, LLC More Documents & Publications Medgate, PIA, Bechtel Jacobs Company, LLC Electronic Document Management System PIA, BechtelJacobs Company, LLC Oracle Financials PIA, Bechtel Jacobs Company, LLC

  13. NERSC Strategic Plan Is Now Online

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Strategic Plan Is Now Online NERSC Strategic Plan Is Now Online June 3, 2013 The NERSC Strategic Plan for FY2014-2023 is now available for download (PDF | 3.2MB). Requested by the DOE Office of Advanced Scientific Computing Research as input for ASCR's long-term planning, the strategic plan discusses NERSC's mission, goals, science drivers, planned initiatives, and technology strategy, among other topics. ≫More NERSC publications and reports. About NERSC and Berkeley Lab The National Energy

  14. Nobel Lecture Videos Now Available Online

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lecture Series Videos Now Available Online Nobel Lecture Videos Now Available Online May 29, 2014 by Kathy Kincade Three of the NERSC Nobel Lecture Series videos -- featuring John Kuriyan, Warren Washington, George Smoot, and Saul Perlmutter -- are now available for viewing. See NERSC Nobel Lecture Series Subscribe via RSS Subscribe Browse by Date January 2016 December 2015 November 2015 October 2015 September 2015 August 2015 July 2015 April 2015 March 2015 January 2015 December 2014 November

  15. Renewable Energy Online Learning | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Renewable Energy Online Learning Renewable Energy Online Learning Curriculum for Tribes The Office of Indian Energy has developed an educational training program that provides tribal leaders and professionals with an overview of the project development process and financing of renewable energy projects on tribal lands. The curriculum includes two tracks: Foundational Courses: basic information on renewable energy technologies, strategic energy planning, and electrical grid basics. Advanced

  16. Usage by Job Size Table

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Usage by Job Size Table Usage by Job Size Table page loading animation Usage Query Interface System All Hopper Edison Cori Carver Planck Matgen Franklin Hopper 1 Magellan Dirac...

  17. LIQUID & GAS NITROGEN LINE SIZING

    Office of Scientific and Technical Information (OSTI)

    These calculations supplement sizing that was done in D-Zero EN-416, rev. 62695, II Pipe Sizing for SolenoidVLPC Cryogenic Systems", EN-416 only looked at the Solenoid and...

  18. Review of trigger and on-line processors at SLAC

    SciTech Connect (OSTI)

    Lankford, A.J.

    1984-07-01

    The role of trigger and on-line processors in reducing data rates to manageable proportions in e/sup +/e/sup -/ physics experiments is defined not by high physics or background rates, but by the large event sizes of the general-purpose detectors employed. The rate of e/sup +/e/sup -/ annihilation is low, and backgrounds are not high; yet the number of physics processes which can be studied is vast and varied. This paper begins by briefly describing the role of trigger processors in the e/sup +/e/sup -/ context. The usual flow of the trigger decision process is illustrated with selected examples of SLAC trigger processing. The features are mentioned of triggering at the SLC and the trigger processing plans of the two SLC detectors: The Mark II and the SLD. The most common on-line processors at SLAC, the BADC, the SLAC Scanner Processor, the SLAC FASTBUS Controller, and the VAX CAMAC Channel, are discussed. Uses of the 168/E, 3081/E, and FASTBUS VAX processors are mentioned. The manner in which these processors are interfaced and the function they serve on line is described. Finally, the accelerator control system for the SLC is outlined. This paper is a survey in nature, and hence, relies heavily upon references to previous publications for detailed description of work mentioned here. 27 references, 9 figures, 1 table.

  19. Prokaryotic Genomes from Microbes Online Database

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Alm, Eric J.; Huang, Katherine H.; Price, Morgan N.; Koche, Richard P.; Keller, Keith; Dubchak, Inna L.; Arkin, Adam P.

    To describe the potential functions of genes, MicrobesOnline includes protein family analyses (from InterPro and COG), metabolic maps (from KEGG), links to research papers (from UniProt and PubMed), and operon predictions for every genome. To examine each gene's evolutionary history, MicrobesOnline includes precomputed phylogenetic trees for all the gene families. It displays gene trees with genomic context or it compares the gene tree to the species tree. The tools provided with MicrobesOnline allow users to: compute customized motifs, sequence alignments, and phylogenetic trees change expression patterns in metabolic maps annotate genes in various ways The database contains more than 430 genomes. A browse tree tool and a genome browser are available, along with specialized search capabilities. (Specialized Interface)

  20. ARM - Measurement - Hydrometeor Size Distribution

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of hydrometeors observed in a given size range. Categories Atmospheric State, Cloud Properties Instruments The above measurement is considered scientifically relevant for the...

  1. Comparing Appliance and Lighting Energy Costs Online Just Got...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Appliance and Lighting Energy Costs Online Just Got Easier Comparing Appliance and Lighting Energy Costs Online Just Got Easier January 11, 2013 - 10:12am Addthis The EnergyGuide...

  2. Online Journal for E&P Geoscientists | Open Energy Information

    Open Energy Info (EERE)

    2012 DOI Not Provided Check for DOI availability: http:crossref.org Online Internet link for Online Journal for E&P Geoscientists Citation AAPG Data PagesSearch and...

  3. SWS Online Tool now includes Multifamily Content, plus a How...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    SWS Online Tool now includes Multifamily Content, plus a How-To Webinar SWS Online Tool now includes Multifamily Content, plus a How-To Webinar This announcement contains...

  4. RRC - Drilling Permits Online Filing User's Guide webpage | Open...

    Open Energy Info (EERE)

    Drilling Permits Online Filing User's Guide webpage Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: RRC - Drilling Permits Online Filing User's Guide...

  5. New Online Training Courses Help Agencies Understand Renewable Tech |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Online Training Courses Help Agencies Understand Renewable Tech New Online Training Courses Help Agencies Understand Renewable Tech March 2, 2015 - 10:30am Addthis Free, online training courses on <a href="https://www4.eere.energy.gov/femp/training/?keyword=&series[0]=93">Renewable Energy Technology Applications</a> are available through the Federal Energy Management Program. Free, online training courses on Renewable Energy Technology

  6. DOE Jobs Online (Hiring Manager), Office of Human Capitol Management

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Innovation and Solutions | Department of Energy Jobs Online (Hiring Manager), Office of Human Capitol Management Innovation and Solutions DOE Jobs Online (Hiring Manager), Office of Human Capitol Management Innovation and Solutions DOE Jobs Online (Hiring Manager), Office of Human Capitol Management Innovation and Solutions PDF icon DOE Jobs Online (Hiring Manager), Office of Human Capitol Management Innovation and Solutions More Documents & Publications PIA - GovTrip (DOE data) PIA -

  7. Photovoltaic Online Training Course for Code Officials | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Photovoltaic Online Training Course for Code Officials Photovoltaic Online Training Course for Code Officials The Photovoltaic Online Training Course for Code Officials is a free online training tool for those officials who conduct reviews and inspections of residential PV systems. Throughout the course's 7 page-turner lessons and 3D interactive Capstone lesson, major topics of concern for field inspection and expedited permitting are covered. In September 2015, an updated version of

  8. New Online Tools Showcase Efficient Technologies and Deployment Case

    Office of Environmental Management (EM)

    Studies | Department of Energy Online Tools Showcase Efficient Technologies and Deployment Case Studies New Online Tools Showcase Efficient Technologies and Deployment Case Studies September 29, 2015 - 12:49pm Addthis New Online Tools Showcase Efficient Technologies and Deployment Case Studies The Federal Energy Management Program (FEMP) released two new online tools to help agencies choose energy- and water-efficient technologies and products for deployment in federal facilities. Now

  9. Study the cytotoxicity of different kinds of water-soluble nanoparticles in human osteoblast-like MG-63 cells

    SciTech Connect (OSTI)

    Niu, Lu; Li, Yang; Li, Xiaojie; Gao, Xue; Su, Xingguang

    2012-11-15

    Highlights: ? Preparation of three kinds of water-soluble QDs: CdTe, CdTe@SiO{sub 2}, Mn:ZnSe. ? Evaluated the cytotoxicity qualitatively and quantitatively. ? Fluorescent staining. ? Detected the total intracellular cadmium in cells. -- Abstract: Quantum nanoparticles have been applied extensively in biological and medical fields, the cytotoxicity of nanoparticles becomes the key point we should concern. In this paper, the cytotoxicity of three kinds of water-soluble nanoparticles: CdTe, CdTe@SiO{sub 2} and Mn:ZnSe was studied. We evaluated the nanoparticles toxicity qualitatively by observing the morphological changes of human osteoblast-like MG-63 cells at different incubation times and colorimetric 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) assays were carried out to detect the cell viability quantitatively. The results showed that CdTe nanoparticles with high concentrations caused cells to die largely while CdTe@SiO{sub 2} and Mn:ZnSe nanoparticles had no obvious effect. For further study, we studied the relation between the cell viability and the total cadmium concentration in cells and found that the viability of cells treated with CdTe@SiO{sub 2} nanoparticles was higher than that treated with CdTe nanoparticles. We also discovered that the death rate of cells co-incubated with CdTe nanoparticles was proportional to the total intracellular cadmium concentrations.

  10. Nuclear design of small-sized high temperature gas-cooled reactor for developing countries

    SciTech Connect (OSTI)

    Goto, M.; Seki, Y.; Inaba, Y.; Ohashi, H.; Sato, H.; Fukaya, Y.; Tachibana, Y.

    2012-07-01

    Japan Atomic Energy Agency (JAEA) has started a conceptual design of a small-sized HTGR with 50 MW thermal power (HTR50S), which is a first-of-a-kind commercial or demonstration plant of a small-sized HTGR to be deployed in developing countries such as Kazakhstan in the 2020's. The nuclear design of the HTR50S is performed by upgrading the proven technology of the High Temperature Engineering Test Reactor (HTTR) to reduce the cost for the construction. In the HTTR design, twelve kinds of fuel enrichment was used to optimize the power distribution, which is required to make the maximum fuel temperature below the thermal limitation during the burn-up period. However, manufacture of many kinds of fuel enrichment causes increase of the construction cost. To solve this problem, the present study challenges the nuclear design by reducing the number of fuel enrichment to as few as possible. The nuclear calculations were performed with SRAC code system whose validity was proven by the HTTR burn-up data. The calculation results suggested that the optimization of the power distribution was reasonably achieved and the maximum fuel temperature was kept below the limitation by using three kinds of fuel enrichment. (authors)

  11. Online adaptation and verification of VMAT

    SciTech Connect (OSTI)

    Crijns, Wouter; Defraene, Gilles; Depuydt, Tom; Haustermans, Karin; Van Herck, Hans; Maes, Frederik; Van den Heuvel, Frank

    2015-07-15

    Purpose: This work presents a method for fast volumetric modulated arc therapy (VMAT) adaptation in response to interfraction anatomical variations. Additionally, plan parameters extracted from the adapted plans are used to verify the quality of these plans. The methods were tested as a prostate class solution and compared to replanning and to their current clinical practice. Methods: The proposed VMAT adaptation is an extension of their previous intensity modulated radiotherapy (IMRT) adaptation. It follows a direct (forward) planning approach: the multileaf collimator (MLC) apertures are corrected in the beam’s eye view (BEV) and the monitor units (MUs) are corrected using point dose calculations. All MLC and MU corrections are driven by the positions of four fiducial points only, without need for a full contour set. Quality assurance (QA) of the adapted plans is performed using plan parameters that can be calculated online and that have a relation to the delivered dose or the plan quality. Five potential parameters are studied for this purpose: the number of MU, the equivalent field size (EqFS), the modulation complexity score (MCS), and the components of the MCS: the aperture area variability (AAV) and the leaf sequence variability (LSV). The full adaptation and its separate steps were evaluated in simulation experiments involving a prostate phantom subjected to various interfraction transformations. The efficacy of the current VMAT adaptation was scored by target mean dose (CTV{sub mean}), conformity (CI{sub 95%}), tumor control probability (TCP), and normal tissue complication probability (NTCP). The impact of the adaptation on the plan parameters (QA) was assessed by comparison with prediction intervals (PI) derived from a statistical model of the typical variation of these parameters in a population of VMAT prostate plans (n = 63). These prediction intervals are the adaptation equivalent of the tolerance tables for couch shifts in the current clinical practice. Results: The proposed adaptation of a two-arc VMAT plan resulted in the intended CTV{sub mean} (Δ ≤ 3%) and TCP (ΔTCP ≤ 0.001). Moreover, the method assures the intended CI{sub 95%} (Δ ≤ 11%) resulting in lowered rectal NTCP for all cases. Compared to replanning, their adaptation is faster (13 s vs 10 min) and more intuitive. Compared to the current clinical practice, it has a better protection of the healthy tissue. Compared to IMRT, VMAT is more robust to anatomical variations, but it is also less sensitive to the different correction steps. The observed variations of the plan parameters in their database included a linear dependence on the date of treatment planning and on the target radius. The MCS is not retained as QA metric due to a contrasting behavior of its components (LSV and AAV). If three out of four plan parameters (MU, EqFS, AAV, and LSV) need to lie inside a 50% prediction interval (3/4—50%PI), all adapted plans will be accepted. In contrast, all replanned plans do not meet this loose criterion, mainly because they have no connection to the initially optimized and verified plan. Conclusions: A direct (forward) VMAT adaptation performs equally well as (inverse) replanning but is faster and can be extended to real-time adaptation. The prediction intervals for the machine parameters are equivalent to the tolerance tables for couch shifts in the current clinical practice. A 3/4—50%PI QA criterion accepts all the adapted plans but rejects all the replanned plans.

  12. Status of not-in-kind refrigeration technologies for household space conditioning, water heating and food refrigeration

    SciTech Connect (OSTI)

    Bansal, Pradeep; Vineyard, Edward Allan; Abdelaziz, Omar

    2012-01-01

    This paper presents a review of the next generation not-in-kind technologies to replace conventional vapor compression refrigeration technology for household applications. Such technologies are sought to provide energy savings or other environmental benefits for space conditioning, water heating and refrigeration for domestic use. These alternative technologies include: thermoacoustic refrigeration, thermoelectric refrigeration, thermotunneling, magnetic refrigeration, Stirling cycle refrigeration, pulse tube refrigeration, Malone cycle refrigeration, absorption refrigeration, adsorption refrigeration, and compressor driven metal hydride heat pumps. Furthermore, heat pump water heating and integrated heat pump systems are also discussed due to their significant energy saving potential for water heating and space conditioning in households. The paper provides a snapshot of the future R&D needs for each of the technologies along with the associated barriers. Both thermoelectric and magnetic technologies look relatively attractive due to recent developments in the materials and prototypes being manufactured.

  13. Automatic identification of abstract online groups

    DOE Patents [OSTI]

    Engel, David W; Gregory, Michelle L; Bell, Eric B; Cowell, Andrew J; Piatt, Andrew W

    2014-04-15

    Online abstract groups, in which members aren't explicitly connected, can be automatically identified by computer-implemented methods. The methods involve harvesting records from social media and extracting content-based and structure-based features from each record. Each record includes a social-media posting and is associated with one or more entities. Each feature is stored on a data storage device and includes a computer-readable representation of an attribute of one or more records. The methods further involve grouping records into record groups according to the features of each record. Further still the methods involve calculating an n-dimensional surface representing each record group and defining an outlier as a record having feature-based distances measured from every n-dimensional surface that exceed a threshold value. Each of the n-dimensional surfaces is described by a footprint that characterizes the respective record group as an online abstract group.

  14. Globus Online File Transfer - NERSC Tutorial - March 8, 2011

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    globusonline.org globus online Reliable File Transfer. No IT Required. NERSC File Transfer Tutorial Steve Tuecke Deputy Director, Computation Institute University of Chicago & Argonne National Laboratory 2 globusonline.org Globus Toolkit Build the Grid Components for building custom grid solutions globustoolkit.org Globus Online Use the Grid Reliable file transfer Software-as-a-Service globusonline.org Some context 3 globusonline.org Globus Online In Action 28.6 Terabytes 31,000 files 56h

  15. DOE Announces International Agreement on Global Science Online Gateway |

    Energy Savers [EERE]

    Department of Energy International Agreement on Global Science Online Gateway DOE Announces International Agreement on Global Science Online Gateway June 12, 2008 - 1:30pm Addthis WASHINGTON, DC - The U.S. Department of Energy (DOE) today announced the establishment of a multilateral alliance to govern the rapidly growing online gateway to international scientific research information--WorldWideScience.org. Officials from organizations representing 38 countries formalized their commitment

  16. Online Classified or Controlled Information Mini-Lessons | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Online Classified or Controlled Information Mini-Lessons Online Classified or Controlled Information Mini-Lessons These online lessons are short animated lessons to provide you with a quick refresher on some aspect of classified or controlled information. If there is a particular aspect of classified or controlled information you would like addressed in a lesson, please contact the Outreach Program at (301) 903-5767 or outreach@hq.doe.gov. Classified Information Marking Classified

  17. Online Toolkit Fosters Bioenergy Innovation | Department of Energy

    Energy Savers [EERE]

    Online Toolkit Fosters Bioenergy Innovation Online Toolkit Fosters Bioenergy Innovation January 21, 2011 - 2:27pm Addthis Learn more about the Bioenergy Knowledge Discovery Framework, an online data sharing and mapping toolkit. Paul Bryan Biomass Program Manager, Office of Energy Efficiency & Renewable Energy What will the project do? The $241 million loan guarantee for Diamond Green Diesel, funding which will support the construction of a facility that will nearly triple the amount of

  18. January 2014 Cybersecurity Awareness Campaign - Secure Online Shopping |

    Office of Environmental Management (EM)

    Department of Energy 4 Cybersecurity Awareness Campaign - Secure Online Shopping January 2014 Cybersecurity Awareness Campaign - Secure Online Shopping The January 2014 Cybersecurity Awareness Campaign featured issues surrounding secure online shopping. For more information on privacy issues, contact Jerry Hanley at Jerry.Hanley@hq.doe.gov. For information on Supply Chain Risk Management, contact Sue Farrand at Susan.Farrand@hq.doe.gov. PDF icon Cybersecurity Front Burner Issue 15 PDF icon

  19. Strategy Guideline: HVAC Equipment Sizing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Strategy Guideline: HVAC Equipment Sizing Arlan Burdick IBACOS, Inc. February 2012 This report received minimal editorial review at NREL NOTICE This report was prepared as an account of work sponsored by an agency of the United States government. Neither the United States government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information,

  20. Arizona Online Environmental Review Tool | Open Energy Information

    Open Energy Info (EERE)

    Online Environmental Review ToolInfo GraphicMapChart Abstract The Arizona Game and Fish Department's Heritage Data Management System (HDMS) and Project Evaluation Program...

  1. Hawaii Wastewater Branch Online Application Webpage | Open Energy...

    Open Energy Info (EERE)

    Application Webpage Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Hawaii Wastewater Branch Online Application Webpage Author State of Hawaii...

  2. Web Mapping and Online GIS Applications for Renewable Energy...

    Open Energy Info (EERE)

    for Renewable Energy Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Web Mapping and Online GIS Applications for Renewable Energy AgencyCompany Organization:...

  3. Online Monitoring Technical Basis and Analysis Framework for...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Online Monitoring Technical Basis and Analysis Framework for Emergency Diesel Generators-Interim Report for FY 2013 The Light Water Reactor Sustainability Program is a research, ...

  4. WSDE Online System for Registering UIC Wells webpage | Open Energy...

    Open Energy Info (EERE)

    developers to register their UIC wells online. Author Washington State Department of Ecology Published Washington State Department of Ecology, 2014 DOI Not Provided Check for DOI...

  5. One in five online scholarly articles affected by 'reference...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    One in five online scholarly articles affected by 'reference rot' Alumni Link: Opportunities, News and Resources for Former Employees Latest Issue:September 2015 all issues All...

  6. CAIRS Direct Data Entry (CDDE) Online Training Package | Department of

    Energy Savers [EERE]

    Energy Direct Data Entry (CDDE) Online Training Package CAIRS Direct Data Entry (CDDE) Online Training Package June 2014 CAIRS Direct Data Entry (CDDE) Online Training Package This self-paced tutorial is designed to instruct users on how to utilize CDDE features to compile and submit CAIRS reports (DOE Form 5484.3 and DOE Form 5484.4). Step-by-step instructions are provided for entering accident and exposure information through a graphical-user-interface. The on-line training consists of the

  7. Strategy Guideline: HVAC Equipment Sizing

    SciTech Connect (OSTI)

    Burdick, A.

    2012-02-01

    The heating, ventilation, and air conditioning (HVAC) system is arguably the most complex system installed in a house and is a substantial component of the total house energy use. A right-sized HVAC system will provide the desired occupant comfort and will run efficiently. This Strategy Guideline discusses the information needed to initially select the equipment for a properly designed HVAC system. Right-sizing of an HVAC system involves the selection of equipment and the design of the air distribution system to meet the accurate predicted heating and cooling loads of the house. Right-sizing the HVAC system begins with an accurate understanding of the heating and cooling loads on a space; however, a full HVAC design involves more than just the load estimate calculation - the load calculation is the first step of the iterative HVAC design procedure. This guide describes the equipment selection of a split system air conditioner and furnace for an example house in Chicago, IL as well as a heat pump system for an example house in Orlando, Florida. The required heating and cooling load information for the two example houses was developed in the Department of Energy Building America Strategy Guideline: Accurate Heating and Cooling Load Calculations.

  8. Online b-jets tagging at CDF

    SciTech Connect (OSTI)

    Casarsa, M.; Ristori, L.; Amerio, S.; Lucchesi, D.; Pagan Griso, S.; Torre, S.T.; Cortiana, G.; /Padua U., Astron. Dept.

    2007-04-01

    We propose a method to identify b-quark jets at trigger level which exploits recently increased CDF trigger system capabilities. b-quark jets identification is of central interest for the CDF high-P{sub T} physics program, and the possibility to select online b-jets enriched samples can extend the physics reaches especially for light Higgs boson searches where the H {yields} b{bar b} decay mode is dominant. Exploiting new trigger primitives provided by two recent trigger upgrades, the Level2 XFT stereo tracking and the improved Level2 cluster-finder, in conjunction with the existing Silicon Vertex Tracker (SVT), we design an online trigger algorithm aimed at selecting good purity b-jets samples useful for many physics measurements, the most important being inclusive H {yields} b{bar b} searches. We discuss the performances of the proposed b-tagging algorithm which must guarantee reasonable trigger rates at luminosity greater than 2 x 10{sup 32} cm{sup -2}s{sup -1} and provide high efficiency on H {yields} b{bar b} events.

  9. Full Updated List of Publications Now Available Online! | Energy Frontier

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Research Centers Full Updated List of Publications Now Available Online! Home The full publication list of the RMSSEC EFRC is avaialble online at the follwoing DOE website. This list is frequently updated and will provide users with the latest information on Center publications. http://science.energy.gov/bes/efrc/publications/

  10. Online Monitoring System for Performance Fault Detection

    SciTech Connect (OSTI)

    Gioiosa, Roberto; Kestor, Gokcen; Kerbyson, Darren J.

    2014-05-19

    To achieve the exaFLOPS performance within a contain power budget, next supercomputers will feature hundreds of millions of components operating at low- and near-threshold voltage. As the probability that at least one of these components fails during the execution of an application approaches certainty, it seems unrealistic to expect that any run of a scientific application will not experience some performance faults. We believe that there is need of a new generation of light-weight performance and debugging tools that can be used online even during production runs of parallel applications and that can identify performance anomalies during the application execution. In this work we propose the design and implementation of a monitoring system that continuously inspects the evolution of run

  11. On-line process control monitoring system

    DOE Patents [OSTI]

    O'Rourke, Patrick E. (Martinez, GA); Van Hare, David R. (Aiken, SC); Prather, William S. (Augusta, GA)

    1992-01-01

    An on-line, fiber-optic based apparatus for monitoring the concentration of a chemical substance at a plurality of locations in a chemical processing system comprises a plurality of probes, each of which is at a different location in the system, a light source, optic fibers for carrying light to and from the probes, a multiplexer for switching light from the source from one probe to the next in series, a diode array spectrophotometer for producing a spectrum from the light received from the probes, and a computer programmed to analyze the spectra so produced. The probes allow the light to pass through the chemical substance so that a portion of the light is absorbed before being returned to the multiplexer. A standard and a reference cell are included for data validation and error checking.

  12. On-line tritium production monitor

    DOE Patents [OSTI]

    Mihalczo, John T. (Oak Ridge, TN)

    1993-01-01

    A scintillation optical fiber system for the on-line monitoring of nuclear reactions in an event-by-event manner is described. In the measurement of tritium production one or more optical fibers are coated with enriched .sup.6 Li and connected to standard scintillation counter circuitry. A neutron generated .sup.6 Li(n )T reaction occurs in the coated surface of .sup.6 Li-coated fiber to produce energetic alpha and triton particles one of which enters the optical fiber and scintillates light through the fiber to the counting circuit. The coated optical fibers can be provided with position sensitivity by placing a mirror at the free end of the fibers or by using pulse counting circuits at both ends of the fibers.

  13. On-line tritium production monitor

    DOE Patents [OSTI]

    Mihalczo, J.T.

    1993-11-23

    A scintillation optical fiber system for the on-line monitoring of nuclear reactions in an event-by-event manner is described. In the measurement of tritium production one or more optical fibers are coated with enriched {sup 6}Li and connected to standard scintillation counter circuitry. A neutron generated {sup 6}Li(n)T reaction occurs in the coated surface of {sup 6}Li-coated fiber to produce energetic alpha and triton particles one of which enters the optical fiber and scintillates light through the fiber to the counting circuit. The coated optical fibers can be provided with position sensitivity by placing a mirror at the free end of the fibers or by using pulse counting circuits at both ends of the fibers. 5 figures.

  14. Trends Online: A Compendium of Data on Global Change

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Data records are presented in multipage formats, each dealing with a specific site, region, or emissions species. The data records include tables; graphs; discussions of methods for collecting, measuring, and reporting the data; trends in the data, and references to literature providing further information. Instructions for citing specific data in Trends Online are provided for each compiled data set. All data appearing in Trends Online are available, on request, on digital media from CDIAC at no cost. [Copied from the Abstract to Trends Online at http://cdiac.ornl.gov/trends/abstract.htm

  15. On-line subsea multiphase flow measurement

    SciTech Connect (OSTI)

    High, G.; Frantzen, K.H.; Marshall, M.

    1995-12-31

    This paper describes the final detailed design, engineering, and installation phase of a Joint Industry Program to qualify a robust subsea multiphase flowmeter module for long-term installation on a North Sea manifold tie-in. Multiphase subsea production has become a common method of hydrocarbon recovery in all areas of offshore E and P. In the North Sea, many developments are subsea satellites with multiphase well-fluids being comingled prior to processing. The system described meets this challenge by offering a cost effective solution to real-time well monitoring as an alternative to the conventional test separator, removing the need for test lines and shutting in wells for testing. The multiphase instrument allows on-line well fluid analysis, and is also an important tool for reservoir management and field analysis, and provides a means of implementing field allocation metering thereby simplifying small marginal field developments. This project is one of the first subsea multiphase flowmeter installations engineered for long-term subsea service, and designed as an integrated component of the subsea production control system.

  16. Northeast Home Heating Oil Reserve- Online Bidding System

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy has developed an on-line bidding system - an anonymous auction program - for the sale of product from the one million barrel Northeast Home Heating Oil Reserve.

  17. Online Registration Dates Set for 2011 Hanford Tours

    Broader source: Energy.gov [DOE]

    RICHLAND, Wash. – The U.S. Department of Energy (DOE) will open online registration on March 8 for tours of the Hanford Site and on March 15 for B Reactor-specific tours.

  18. RRC - Online Drilling Permit System Login webpage | Open Energy...

    Open Energy Info (EERE)

    System Login webpage Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: RRC - Online Drilling Permit System Login webpage Abstract This is the login...

  19. A reactor core on-line monitoring program - COMP

    SciTech Connect (OSTI)

    Wang, C.; Wu, H.; Cao, L.

    2012-07-01

    A program named COMP is developed for on-line monitoring PWRs' in-core power distribution in this paper. Harmonics expansion method is used in COMP. The Unit 1 reactor of Daya Bay Nuclear Power Plant (Daya Bay NPP) in China is considered for verification. The numerical results show that the maximum relative error between measurement and reconstruction results from COMP is less than 5%, and the computing time is short, indicating that COMP is capable for online monitoring PWRs. (authors)

  20. Implementation Guidance for the DOE Policy on Documentation and Online

    Energy Savers [EERE]

    Posting of Categorical Exclusion Determinations | Department of Energy Implementation Guidance for the DOE Policy on Documentation and Online Posting of Categorical Exclusion Determinations Implementation Guidance for the DOE Policy on Documentation and Online Posting of Categorical Exclusion Determinations To further transparency and openness in its implementation of the National Environmental Policy Act (NEPA), the Department of Energy (DOE) has established a policy requiring each Program

  1. Distributed PV Interconnection Screening Procedures and Online Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Distributed PV Interconnection Screening Procedures and Online Tools" Joel Dickinson with Salt River Project Solar Initiatives Group August 27, 2014 2 Speakers Joel Dickinson Sr. Engineer Salt River Project Kristen Ardani Solar Analyst National Renewable Energy Laboratory (DGIC moderator) August 27th, 2014 Joel Dickinson, P.E. Sr. Engineer Solar Initiatives Distributed PV Interconnection Screening and Online Tools Salt River Project  Established in 1903 after Theodore Roosevelt signed

  2. NOVA NERSC's Online VASP Application Annette Greiner Shreyas Cholia

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NOVA NERSC's Online VASP Application Annette Greiner Shreyas Cholia 0 10 20 30 40 50 60 70 80 90 VASP Gaussian Quantum Espresso NWChem LAMMPS NAMD NIMROD WRF CPMD Codes Used by the Most Projects at NERSC Number of Projects as of Sep 2010 Why VASP? Why run VASP in a browser? Making interacting with HPC more efficient * Error checking * Organizing and retrieving jobs * Real-time job monitoring * Integrated analysis tools * Integration with other online tools * Meaningful UI controls VASP with a

  3. New Online Marketplace for Small Business Contracting Launched by

    Energy Savers [EERE]

    Presidential Fellows | Department of Energy Online Marketplace for Small Business Contracting Launched by Presidential Fellows New Online Marketplace for Small Business Contracting Launched by Presidential Fellows January 17, 2013 - 2:54pm Addthis John Hale III John Hale III Director, Office of Small and Disadvantaged Business Utilization Editor's Note: This article was originally posted on the Small Business Administration's website. The U.S. Small Business Administration, in conjunction

  4. Hazards of explosives dusts: Particle size effects

    SciTech Connect (OSTI)

    Cashdollar, K L; Hertzberg, M; Green, G M

    1992-02-01

    At the request of the Department of Energy, the Bureau of Mines has investigated the hazards of military explosives dispersed as dust clouds in a 20-L test chamber. In this report, the effect of particle size for HMX, HNS, RDX, TATB, and TNT explosives dusts is studied in detail. The explosibility data for these dusts are also compared to those for pure fuel dusts. The data show that all of the sizes of the explosives dusts that were studied were capable of sustaining explosions as dust clouds dispersed in air. The finest sizes (<10 [mu]m) of explosives dusts were less reactive than the intermediate sizes (20 to 60 [mu]m); this is opposite to the particle size effect observed previously for the pure fuel dusts. At the largest sizes studied, the explosives dusts become somewhat less reactive as dispersed dust clouds. The six sizes of the HMX dust were also studied as dust clouds dispersed in nitrogen.

  5. On-Line Weld NDE with IR Thermography | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    On-Line Weld NDE with IR Thermography On-Line Weld NDE with IR Thermography 2012 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting PDF icon lm054_warren_2012_o.pdf More Documents & Publications On-Line Weld NDE with IR Thermography Vehicle Technologies Office Merit Review 2014: On-Line Weld NDE with IR Thermography Online Weld Quality NDE & Control with IR Thermography

  6. A simulator designated to the help sizing of waste incineration plant with energy valorization

    SciTech Connect (OSTI)

    Lemoult, B.

    1998-07-01

    The integrated waste treatment (sorting, recycling, composting, incineration, tip) concept is increasing. In this concept, incineration remains the last way of destruction before tipping of refuse. With the aim to improve thermal and economic efficiencies of this kind of treatment, thermal and/or electrical energy are produced in incineration plants. If environmental rules lead to a steady increase of such plants, a lot of data have to be evaluated to find the best size, especially under economic aspects, for a given project. The author presents the specification of the software ARTEMIS, which helps a project manager to find the optimal size of a plant, to quantify the effect of various technical options, and to compare some operating management. Garbage deposit (quantity and quality), energy valorization (electricity price, thermal needs), machines (furnace, high and low pressure turbines, heat exchanger, auxiliary boiler) are taken into account. Energy and economic annual balance are also calculated with a hourly simulation step.

  7. ARM - Measurement - Cloud particle size distribution

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    size distribution ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Measurement : Cloud particle size distribution The number of cloud particles present in any given volume of air within a specified size range, including liquid and ice. Categories Cloud Properties Instruments The above measurement is considered scientifically relevant for the following instruments. Refer to the datastream (netcdf) file headers of each

  8. Investigation of thermochemical biorefinery sizing and environmental...

    Office of Scientific and Technical Information (OSTI)

    Investigation of thermochemical biorefinery sizing and environmental sustainability impacts for conventional supply system and distributed pre-processing supply system designs...

  9. Online at the Energy Department | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    at the Energy Department Online at the Energy Department March 7, 2013 - 2:06pm Addthis Online at the Energy Department April Saylor April Saylor Former Digital Outreach Strategist, Office of Public Affairs Follow Us: Pinterest Google+ Facebook Twitter Energy Saver Facebook If you're one of the millions of people using social-sharing site Pinterest, we have some exciting news: we're launching the Energy Department's official Pinterest page at pinterest.com/energy. There, you'll find pinboards

  10. NERSC Online Training May 3: Navigating NERSC File Systems

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Online Training May 3: Navigating NERSC File Systems NERSC Online Training May 3: Navigating NERSC File Systems April 26, 2011 by Richard Gerber A NERSC training event, "Navigating NERSC File Systems," will be presented Tuesday, May 3, 2011, from 10:00 -11:00 PDT. This event was postponed from April 26. The event will be presented simultaneously at the NERSC Oakland Scientific Facility and as a webcast. NERSC hosts a number of file storage systems, each with its unique characteristics.

  11. An instrument to measure extended particle size and velocity ranges in multiphase flows

    SciTech Connect (OSTI)

    Wood, C.P.; Hess, C.F.

    1995-12-31

    This paper describes a miniaturized particle sizing velocimeter developed and built by MetroLaser to measure the spatial and temporal distributions of particle size and velocity. The instrument is the first of its kind to utilize the pulse displacement technique (PDT) to measure particle size. PDT is based on the detection of scattered refraction and reflection pulses which sweep past a detector at different times as a particle traverses a narrow laser sheet. In conjunction with Mie scattering and a time-of-fight velocity measuring technique, the instrument provides detailed distributions of particle size from 2 {micro}m to 6,000 {micro}m in two optical configurations, and particle velocity from 0.5 m/s to 150 m/s. This paper summarizes the theoretical foundation of PDT which allows the calculation of particle diameter from various optical parameters such as refractive index and collection angle. An overview of the instrument is presented, followed by a brief description of the miniaturized optical probe. The processing of data is described and, lastly, the results of experimental studies are presented which verify the accuracy and versatility of the instrument.

  12. IEA-GIA ExCo - National Geothermal Data System and Online Tools...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    IEA-GIA ExCo - National Geothermal Data System and Online Tools IEA-GIA ExCo - National Geothermal Data System and Online Tools National Geothermal Data System presentation by Jay...

  13. online Surveillance of Industrial Processes with Correlated Parameters

    Energy Science and Technology Software Center (OSTI)

    1996-12-18

    SMP is a system for online surveillance of industrial processes or machinery for determination of the incipience or onset of abnormal operating conditions. SMP exploits the cross correlation between all of the sensors that are available on the system under surveillance to provide an extremely high sensitivity for annunciation of subtle disturbances in process variables.

  14. New Online Tool Expands Analysis of Biofuels’ Water Impact

    Broader source: Energy.gov [DOE]

    Last week, Argonne National Laboratory released a new version of the Water Assessment for Transportation Energy Resources (WATER) online tool. As with the previous two versions, WATER 3.0 quantifies the water footprint of various biofuel pathways, providing details of the water consumption required for the production of biofuels.

  15. Investigations of initiation spot size effects

    SciTech Connect (OSTI)

    Clarke, Steven A; Akinci, Adrian A; Leichty, Gary; Schaffer, Timothy; Murphy, Michael J; Munger, Alan; Thomas, Keith A

    2010-01-01

    As explosive components become smaller, a greater understanding of the effect of initiation spot size on detonation becomes increasingly critical. A series of tests of the effect of initiation spot size will be described. A series of DOI (direct optical initiation) detonators with initiation spots sizes from {approx}50 um to 1000um have been tested to determine laser parameters for threshold firing of low density PETN pressings. Results will be compared with theoretical predictions. Outputs of the initiation source (DOI ablation) have been characterized by a suite of diagnostics including PDV and schlieren imaging. Outputs of complete detonators have been characterized using PDV, streak, and/or schlieren imaging. At present, we have not found the expected change in the threshold energy to spot size relationship for DOI type detonators found in similar earlier for projectiles, slappers and EBWs. New detonators designs (Type C) are currently being tested that will allow the determination of the threshold for spot sizes from 250 um to 105um, where we hope to see change in the threshold vs. spot size relationship. Also, one test of an extremely small diameter spot size (50um) has resulted in preliminary NoGo only results even at energy densities as much as 8 times the energy density of the threshold results presented here. This gives preliminary evidence that 50um spot may be beyond the critical initiation diameter. The constant threshold energy to spot size relationship in the data to date does however still give some insight into the initiation mechanism of DOI detonators. If the DOI initiation mechanism were a 1D mechanism similar to a slapper or a flyer impact, the expected inflection point in the graph would have been between 300um and 500um diameter spot size, within the range of the data presented here. The lack of that inflection point indicates that the DOI initiation mechanism is more likely a 2D mechanism similar to a sphere or rod projectile. We expect to see a three region response as the results from the smaller spot size Type C detonators are completed.

  16. Luminescent pillared Ln{sup III}Zn{sup II} heterometallic coordination frameworks with two kinds of N-heterocyclic carboxylate ligands

    SciTech Connect (OSTI)

    Liu, Sui-Jun; Jia, Ji-Min; Cui, Yu; Han, Song-De; Chang, Ze

    2014-04-01

    In our efforts toward rational design and systematic synthesis of pillar-layer structure coordination frameworks, four new Ln{sup III}Zn{sup II} heterometallic coordination polymers (CPs) based on two kinds of N-heterocyclic carboxylic ligands with formula ([LnZn(L1){sub 2}(L2)(H{sub 2}O){sub m}]nH{sub 2}O){sub ?} (Ln=La (1), Eu (2), Gd (3) and Dy (4), m=3 (for 1) and 2 (for 24), n=8 (for 1) and 7 (for 24), H{sub 2}L1=pyridine-2,3-dicarboxylate acid, HL2=isonicotinic acid), have been synthesized under hydrothermal reaction of Ln{sub 2}O{sub 3}, ZnO, H{sub 2}L1 and HL2. CP 1 has a three-dimensional (3D) structure with a (3,6)-connected sit topology network, while CPs 24 are isostructural with 3D single-node pcu alpha-Po topology network. Also, luminescent properties of these CPs have also been investigated. The emission of 1 and 3 should be attributed to the coordination-perturbed ligand-centered luminescence and the emission spectra of 2 and 4 show the characteristic bands of the corresponding Ln{sup III} ions. - Graphical abstract: Four new 3D Ln{sup III}Zn{sup II} coordination frameworks with pillar-layer sit or pcu alpha-Po topology have been successfully obtained. Moreover, the photoluminescent properties of compounds 14 have also been investigated. - Highlights: Four new Ln{sup III}Zn{sup II} heterometallic coordination frameworks with two types of topologies have been synthesized. Metal oxides and two kinds of N-heterocyclic carboxylate ligands were used for the construction of targeted coordination polymers. The luminescent properties of the coordination polymers are investigated.

  17. Remote Automatic Material On-Line Sensor

    SciTech Connect (OSTI)

    Magnuson, Erik

    2005-12-20

    Low cost NMR sensor for measuring moisture content of forest products. The Department of Energy (DOE) Industries of the Future (IOF) program seeks development and implementation of technologies that make industry more efficient--in particular, more energy-efficient. Quantum Magnetics, Inc. (QM), a wholly-owned subsidiary of GE Security, received an award under the program to investigate roles for low-cost Nuclear Magnetic Resonance (NMR) technology in furtherance of these goals. Most NMR systems are designed for high-resolution spectroscopy applications. These systems use intense magnetic fields produced by superconducting magnets that drive price and operating cost to levels beyond industry tolerance. At low magnetic fields, achievable at low cost, one loses the ability to obtain spectroscopic information. However, measuring the time constants associated with the NMR signal, called NMR relaxometry, gives indications of chemical and physical states of interest to process control and optimization. It was the purpose of this effort to investigate the technical and economic feasibility of using such low-field, low-cost NMR to monitor parameters enabling greater process efficiencies. The primary target industry identified in the Cooperative Development Agreement was the wood industry, where the moisture content of wood is a key process parameter from the time the cut tree enters a mill until the time it is delivered as pieces of lumber. Extracting the moisture is energy consuming, and improvements in drying efficiency stand to reduce costs and emissions substantially. QM designed and developed a new, low-cost NMR instrument suitable for inspecting lumber up to 3 inches by 12 inches in cross section, and other materials of similar size. Low cost is achieved via an inexpensive, permanent magnet and low-cost NMR spectrometer electronics. Laboratory testing demonstrated that the NMR system is capable of accurate ({+-} 0.5%) measurements of the moisture content of wood for moisture ranging from 2% to over 140% (referenced to the wood's dry weight). Accuracy exceeded that offered by existing instrumentation when the moisture content was in excess of the fiber saturation point ({approx}20%). Accuracy was independent of the wood form: solid wood, wood chips or sawdust. The prototype NMR system was designed and built for incorporation and use in a beta test site. Beta testing is under way at the pilot plant operated by the Pulp and Paper Research Institute of Canada (PAPRICAN) in Vancouver, B.C. Other industries were also investigated. For example, laboratory testing demonstrated that low-field NMR is capable of measuring the hydrogen content of calcium oxide (quicklime). Hydrogen content measurement can be done both rapidly (on the order of 1 second) and nondestructively. Measurement of moisture in quicklime affects energy consumption in the steel industry. Further advances in system electronics, ongoing under DOD support, will enable yet more substantial system cost reductions over the prototype system, opening up a wider range of utility.

  18. Size separation of analytes using monomeric surfactants

    DOE Patents [OSTI]

    Yeung, Edward S.; Wei, Wei

    2005-04-12

    A sieving medium for use in the separation of analytes in a sample containing at least one such analyte comprises a monomeric non-ionic surfactant of the of the general formula, B-A, wherein A is a hydrophilic moiety and B is a hydrophobic moiety, present in a solvent at a concentration forming a self-assembled micelle configuration under selected conditions and having an aggregation number providing an equivalent weight capable of effecting the size separation of the sample solution so as to resolve a target analyte(s) in a solution containing the same, the size separation taking place in a chromatography or electrophoresis separation system.

  19. The price of commitment in online stochastic vehicle routing

    SciTech Connect (OSTI)

    Bent, Russell W; Van Hentenryck, Pascal

    2009-01-01

    This paper considers online stochastic multiple vehicle routing with time windows in which requests arrive dynamically and the goal is to maximize the number of serviced customers. Early work has focused on very flexible routing settings where the decision to assign a vehicle to a customer is delayed until a vehicle is actually deployed to the customer. Motivated by real applications that require stability in the decision making, this paper considers a setting where the decision to assign a customer request to a vehicle must be taken when that request is accepted. Experimental results suggest that this constraint severely degrades the performance of existing algorithms. However, the paper shows how the use of stochastic information for vehicle assignment and request acceptance improves decision quality considerably. Moreover, the use of resource augmentation quantifies precisely the cost of commitment in online vehicle routing.

  20. AmiGO: online access to ontology and annotation data

    SciTech Connect (OSTI)

    Carbon, Seth; Ireland, Amelia; Mungall, Christopher J.; Shu, ShengQiang; Marshall, Brad; Lewis, Suzanna

    2009-01-15

    AmiGO is a web application that allows users to query, browse, and visualize ontologies and related gene product annotation (association) data. AmiGO can be used online at the Gene Ontology (GO) website to access the data provided by the GO Consortium; it can also be downloaded and installed to browse local ontologies and annotations. AmiGO is free open source software developed and maintained by the GO Consortium.

  1. Online Monitoring of Plant Assets in the Nuclear Industry

    SciTech Connect (OSTI)

    Nancy Lybeck; Vivek Agarwal; Binh Pham; Richard Rusaw; Randy Bickford

    2013-10-01

    Today’s online monitoring technologies provide opportunities to perform predictive and proactive health management of assets within many different industries, in particular the defense and aerospace industries. The nuclear industry can leverage these technologies to enhance safety, productivity, and reliability of the aging fleet of existing nuclear power plants. The U.S. Department of Energy’s Light Water Reactor Sustainability Program is collaborating with the Electric Power Research Institute’s (EPRI’s) Long-Term Operations program to implement online monitoring in existing nuclear power plants. Proactive online monitoring in the nuclear industry is being explored using EPRI’s Fleet-Wide Prognostic and Health Management (FW-PHM) Suite software, a set of web-based diagnostic and prognostic tools and databases that serves as an integrated health monitoring architecture. This paper focuses on development of asset fault signatures used to assess the health status of generator step-up transformers and emergency diesel generators in nuclear power plants. Asset fault signatures describe the distinctive features based on technical examinations that can be used to detect a specific fault type. Fault signatures are developed based on the results of detailed technical research and on the knowledge and experience of technical experts. The Diagnostic Advisor of the FW-PHM Suite software matches developed fault signatures with operational data to provide early identification of critical faults and troubleshooting advice that could be used to distinguish between faults with similar symptoms. This research is important as it will support the automation of predictive online monitoring techniques in nuclear power plants to diagnose incipient faults, perform proactive maintenance, and estimate the remaining useful life of assets.

  2. Expert system for online surveillance of nuclear reactor coolant pumps

    DOE Patents [OSTI]

    Gross, Kenny C. (Bolingbrook, IL); Singer, Ralph M. (Naperville, IL); Humenik, Keith E. (Columbia, MD)

    1993-01-01

    An expert system for online surveillance of nuclear reactor coolant pumps. This system provides a means for early detection of pump or sensor degradation. Degradation is determined through the use of a statistical analysis technique, sequential probability ratio test, applied to information from several sensors which are responsive to differing physical parameters. The results of sequential testing of the data provide the operator with an early warning of possible sensor or pump failure.

  3. One in five online scholarly articles affected by 'reference rot'

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Scholarly articles affected by 'reference rot' One in five online scholarly articles affected by 'reference rot' Los Alamos authors focus on reference rot, the combination of link rot and content drift to which references to web resources included in STM articles are subject. January 26, 2015 From left, Los Alamos National Laboratory authors Lyudmila Balakireva, Herbert Van De Sompel and Harihar Shankar, and Martin Klein and Robert Sanderson (on computer screens). Their work was published in the

  4. FENIX for Scalable Online Application Resilience | Argonne Leadership

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Computing Facility FENIX for Scalable Online Application Resilience Event Sponsor: Mathematics and Computer Science Division Seminar Start Date: Mar 4 2016 - 10:30am Building/Room: Building 240/Room 4301 Location: Argonne National Laboratory Speaker(s): Keita Teranishi Speaker(s) Title: Sandia National Laboratories Host: Pavan Balaji Major exascale reports indicate that future HPC systems will suffer shorter Mean Time Between Failures (MTBF) due to the increase in system complexity and

  5. Distributed PV Interconnection Screening Procedures and Online Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Screening Procedures and Online Tools Page 1 of 9 Kristen Ardani, Joel Dickinson, Max Berger, David Crowell, Jeff Dickinson, Kelly Webster Page 1 of 9 [Speaker: Kristen Ardani] Cover Slide: Thank you everyone for joining us today for the DG Interconnection Collaborative. My name is Kristen Ardani,I'm an analyst here at NREL and the lead facilitator of the DGIC. We are fortunate today to have speakers Joel Dickinson of Salt River Project. We are going to discuss distributed PV interconnection

  6. The Majorana Demonstrator: First Module of Germanium Detectors Comes Online

    Office of Science (SC) Website

    | U.S. DOE Office of Science (SC) The Majorana Demonstrator: First Module of Germanium Detectors Comes Online Nuclear Physics (NP) NP Home About Research Facilities Science Highlights Benefits of NP Funding Opportunities Nuclear Science Advisory Committee (NSAC) Community Resources Contact Information Nuclear Physics U.S. Department of Energy SC-26/Germantown Building 1000 Independence Ave., SW Washington, DC 20585 P: (301) 903-3613 F: (301) 903-3833 E: Email Us More Information » 09.01.15

  7. Online Monitoring Technical Basis and Analysis Framework for Large Power

    Energy Savers [EERE]

    Transformers; Interim Report for FY 2012 | Department of Energy for Large Power Transformers; Interim Report for FY 2012 Online Monitoring Technical Basis and Analysis Framework for Large Power Transformers; Interim Report for FY 2012 The Light Water Reactor Sustainability Program is a research, development, and deployment program sponsored by the U.S. Department of Energy Office of Nuclear Energy. The program is operated in collaboration with the Electric Power Research Institute's (EPRI's)

  8. A simple grand canonical approach to compute the vapor pressure of bulk and finite size systems

    SciTech Connect (OSTI)

    Factorovich, Matas H.; Scherlis, Damin A.

    2014-02-14

    In this article we introduce a simple grand canonical screening (GCS) approach to accurately compute vapor pressures from molecular dynamics or Monte Carlo simulations. This procedure entails a screening of chemical potentials using a conventional grand canonical scheme, and therefore it is straightforward to implement for any kind of interface. The scheme is validated against data obtained from Gibbs ensemble simulations for water and argon. Then, it is applied to obtain the vapor pressure of the coarse-grained mW water model, and it is shown that the computed value is in excellent accord with the one formally deduced using statistical thermodynamics arguments. Finally, this methodology is used to calculate the vapor pressure of a water nanodroplet of 94 molecules. Interestingly, the result is in perfect agreement with the one predicted by the Kelvin equation for a homogeneous droplet of that size.

  9. Strategic Petroleum Reserve: Analysis of size options

    SciTech Connect (OSTI)

    Not Available

    1990-02-01

    This report presents the results of the deliberations of the interagency group formed to study the costs and benefits of expanding the size of the SPR. The study concentrated on severe oil supply disruptions involving sharp reductions in world oil production that were 2 to 4 times larger than the largest 1970s interruption. The disruption sizes and estimated probability of occurrence of these scenarios were supplied by the CIA. The most critical part of the CIA's analysis was the assessment of likelihood of these cases occurring. The CIA approached the likelihood problem by combining an examination of past oil supply disruptions with qualitative analysis of important oil market and regional trends. The study group then used statistical techniques and probability distributions to synthesize the historical data with CIA evaluations of as yet unobserved events. The SPR size study assumed direct purchases of SPR oil and did not assume the use of alternative financing mechanisms. Members of the working group with foreign policy and national security responsibilities provided an in-depth review of strategic considerations affecting SPR size. A number of prior studies, some classified, have addressed the strategic importance and insurance value of the SPR to the US and its allies. The results of these studies have also been incorporated in the current effort. 10 refs., 5 figs.

  10. Laser capillary spectrophotometric acquisition of bivariate drop size and concentration data for liquid-liquid dispersion

    DOE Patents [OSTI]

    Tavlarides, Lawrence L. (Fayetteville, NY); Bae, Jae-Heum (Daejeon, KR)

    1991-01-01

    A laser capillary spectrophotometric technique measures real time or near real time bivariate drop size and concentration distribution for a reactive liquid-liquid dispersion system. The dispersion is drawn into a precision-bore glass capillary and an appropriate light source is used to distinguish the aqueous phase from slugs of the organic phase at two points along the capillary whose separation is precisely known. The suction velocity is measured, as is the length of each slug from which the drop free diameter is calculated. For each drop, the absorptivity at a given wavelength is related to the molar concentration of a solute of interest, and the concentration of given drops of the organic phase is derived from pulse heights of the detected light. This technique permits on-line monitoring and control of liquid-liquid dispersion processes.

  11. Laser capillary spectrophotometric acquisition of bivariate drop size and concentration data for liquid-liquid dispersion

    DOE Patents [OSTI]

    Tavlarides, L.L.; Bae, J.H.

    1991-12-24

    A laser capillary spectrophotometric technique measures real time or near real time bivariate drop size and concentration distribution for a reactive liquid-liquid dispersion system. The dispersion is drawn into a precision-bore glass capillary and an appropriate light source is used to distinguish the aqueous phase from slugs of the organic phase at two points along the capillary whose separation is precisely known. The suction velocity is measured, as is the length of each slug from which the drop free diameter is calculated. For each drop, the absorptivity at a given wavelength is related to the molar concentration of a solute of interest, and the concentration of given drops of the organic phase is derived from pulse heights of the detected light. This technique permits on-line monitoring and control of liquid-liquid dispersion processes. 17 figures.

  12. Evolution of soot size distribution in premixed ethylene/air and ethylene/benzene/air flames: Experimental and modeling study

    SciTech Connect (OSTI)

    Echavarria, Carlos A.; Sarofim, Adel F.; Lighty, JoAnn S.; D'Anna, Andrea

    2011-01-15

    The effect of benzene concentration in the initial fuel on the evolution of soot size distribution in ethylene/air and ethylene/benzene/air flat flames was characterized by experimental measurements and model predictions of size and number concentration within the flames. Experimentally, a scanning mobility particle sizer was used to allow spatially resolved and online measurements of particle concentration and sizes in the nanometer-size range. The model couples a detailed kinetic scheme with a discrete-sectional approach to follow the transition from gas-phase to nascent particles and their coagulation to larger soot particles. The evolution of soot size distribution (experimental and modeled) in pure ethylene and ethylene flames doped with benzene showed a typical nucleation-sized (since particles do not actually nucleate in the classical sense particle inception is often used in place of nucleation) mode close to the burner surface, and a bimodal behavior at greater height above burner (HAB). However, major features were distinguished between the data sets. The growth of nucleation and agglomeration-sized particles was faster for ethylene/benzene/air flames, evidenced by the earlier presence of bimodality in these flames. The most significant changes in size distribution were attributed to an increase in benzene concentration in the initial fuel. However, these changes were more evident for high temperature flames. In agreement with the experimental data, the model also predicted the decrease of nucleation-sized particles in the postflame region for ethylene flames doped with benzene. This behavior was associated with the decrease of soot precursors after the main oxidation zone of the flames. (author)

  13. Biomass Engineering: Size reduction, drying and densification

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2 Biomass Engineering: Size reduction, drying and densification March 25th, 2015 This presentation does not contain any proprietary, confidential, or otherwise restricted information Technology Review Area: Feedstock Supply and Logistics Jaya Shankar Tumuluru (PI) Research Team: Neal Yancey, Craig C Conner, Tyler Westover, Richard McCulloch, Kara Cafferty, and Mitch Plummer Organization: Biofuels and Renewable Energy Technology, Idaho National Laboratory DOE Bioenergy Technologies Office (BETO)

  14. Towards a deep understanding of malware propagation in online social networks

    SciTech Connect (OSTI)

    Yan, Guanhua; Eidenbenz, Stephan; Chen, Guanling; Li, Nan

    2009-01-01

    Online social networks, which have been expanding at a blistering speed in the recent years, have emerged as a popular communication infrastructure for Internet users. Meanwhile, malware that specifically targets these online social networks are also on the rise. In this work, we aim to investigate the characteristics of malware propagation in online social networks. Our study is based on a dataset collected from a real-world location-based online social network. We analyze the social structure and user activity patterns of this network. We further use extensive trace-driven simulation to study the impact of initial infection, user click probability, social structure, and activity patterns on malware propagation in online social networks. The results from this work has greatly deepened our understanding of the nature of online social network malware and also shed light on how to defend against them effectively.

  15. AVTA: Full-Size Electric Vehicle Specifications and Test Procedures...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Full-Size Electric Vehicle Specifications and Test Procedures AVTA: Full-Size Electric Vehicle Specifications and Test Procedures PDF icon EV America Test Specifications PDF icon ...

  16. Sandia Energy - Self-Regulated Fabrication of Size-Controlled...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Self-Regulated Fabrication of Size-Controlled Quantum Nanostructures Home Highlights - Energy Research Self-Regulated Fabrication of Size-Controlled Quantum Nanostructures Previous...

  17. Sandia Energy - Enhanced Nanoparticle Size Control by Extending...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Enhanced Nanoparticle Size Control by Extending LaMer's Mechanism Home Office of Science Enhanced Nanoparticle Size Control by Extending LaMer's Mechanism Previous Next Enhanced...

  18. Small- and Medium-Size Building Automation and Control System...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Small- and Medium-Size Building Automation and Control System Needs: Scoping Study Small- and Medium-Size Building Automation and Control System Needs: Scoping Study Michael ...

  19. Small- and Medium-Size Building Automation and Control System...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Small- and Medium-Size Building Automation and Control System Needs: Scoping Study Small- and Medium-Size Building Automation and Control System Needs: Scoping Study Emerging ...

  20. SWS Online Tool now includes Multifamily Content, plus a How-To Webinar

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Multifamily Housing Content Now Available via the Standard Work Specifications Online Tool The National Renewable Energy Laboratory, along with the U.S. Department of Energy (DOE), are pleased to announce that the Standard Work Specifications (SWS) for Multifamily Housing Energy Upgrades are now incorporated within the SWS Online Tool. In addition to this content, the tool also now includes: Explore the Standard Work Specifications Online Tool. An interactive glossary Basic Quality Control

  1. Save Paper (and Headaches) with the Loan Program's New Online Application |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Save Paper (and Headaches) with the Loan Program's New Online Application Save Paper (and Headaches) with the Loan Program's New Online Application August 12, 2010 - 10:15am Addthis Elizabeth Meckes Elizabeth Meckes Director of User Experience & Digital Technologies, Office of Public Affairs What does this mean for me? Personalization. Instant guidance. Security. The Department of Energy's Loan Program Office is pleased to announce the launch of its new online

  2. On-Line Tool to Boost Implementation of Energy Sector Roadmap for Control

    Energy Savers [EERE]

    Systems | Department of Energy On-Line Tool to Boost Implementation of Energy Sector Roadmap for Control Systems On-Line Tool to Boost Implementation of Energy Sector Roadmap for Control Systems News Release: Implementating the Roadmap to Secure Control Systems in the Energy Sector PDF icon On-Line Tool to Boost Implementation of Energy Sector Roadmap for Control Systems More Documents & Publications Roadmap to Secure Control Systems in the Energy Sector 2006 - Presentation to the 2008

  3. New Online Tool Creates One-Stop Shop for Federal Program Opportunities

    Office of Environmental Management (EM)

    That Support Tribal Energy Development | Department of Energy Online Tool Creates One-Stop Shop for Federal Program Opportunities That Support Tribal Energy Development New Online Tool Creates One-Stop Shop for Federal Program Opportunities That Support Tribal Energy Development December 3, 2014 - 9:03am Addthis Today the White House Council on Native American Affairs Energy Subgroup launched a new Federal Grant, Loan, and Technical Assistance Programs for Tribal Energy Development online

  4. High Temperature Transducers for Online Monitoring of Microstructure Evolution

    SciTech Connect (OSTI)

    Lissenden, Cliff; Tittmann, Bernhard

    2015-03-30

    A critical technology gap exists relative to online condition monitoring (CM) of advanced nuclear plant components for damage accumulation; there are not capable sensors and infrastructure available for the high temperature environment. The sensory system, monitoring methodology, data acquisition, and damage characterization algorithm that comprise a CM system are investigated here. Thus this work supports the DOE mission to develop a fundamental understanding of advanced sensors to improve physical measurement accuracy and reduce uncertainty. The research involves a concept viability assessment, a detailed technology gap analysis, and a technology development roadmap.

  5. Wide size range fast integrated mobility spectrometer

    DOE Patents [OSTI]

    Wang, Jian

    2013-10-29

    A mobility spectrometer to measure a nanometer particle size distribution is disclosed. The mobility spectrometer includes a conduit and a detector. The conduit is configured to receive and provide fluid communication of a fluid stream having a charged nanometer particle mixture. The conduit includes a separator section configured to generate an electrical field of two dimensions transverse to a dimension associated with the flow of the charged nanometer particle mixture through the separator section to spatially separate charged nanometer particles of the charged nanometer particle mixture in said two dimensions. The detector is disposed downstream of the conduit to detect concentration and position of the spatially-separated nanometer particles.

  6. Capillary electrophoresis-fluorescence line narrowing system (CE-FLNS) for on-line structural characterization

    DOE Patents [OSTI]

    Jankowiak, R.J.; Small, G.J.; Shields, P.A.

    1999-04-27

    Capillary electrophoresis (CE) is interfaced with low temperature fluorescence line-narrowing (FLN) spectroscopy for on-line structural characterization of separated molecular analytes. 21 figs.

  7. Capillary electrophoresis-fluorescence line narrowing system (CE-FLNS) for on-line structural characterization

    DOE Patents [OSTI]

    Jankowiak, Ryszard J. (Ames, IA); Small, Gerald J. (Ames, IA); Shields, Peter A. (Reading, MA)

    1999-04-27

    Capillary electrophoresis (CE) is interfaced with low temperature fluorescence line-narrowing (FLN) spectroscopy for on-line structural characterization of separated molecular analytes.

  8. Online Weld Quality NDE & Control with IR Thermography | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Weld Quality NDE & Control with IR Thermography Online Weld Quality NDE & Control with IR Thermography 2010 DOE Vehicle Technologies and Hydrogen Programs Annual Merit Review and Peer Evaluation Meeting, June 7-11, 2010 -- Washington D.C. PDF icon lm026_feng_2010_o.pdf More Documents & Publications On-Line Weld NDE with IR Thermography Vehicle Technologies Office Merit Review 2014: On-Line Weld NDE with IR Thermography On-Line Weld NDE with IR Thermography

  9. How to Create a Quality Control Checklist using the SWS Online Tool |

    Energy Savers [EERE]

    Department of Energy How to Create a Quality Control Checklist using the SWS Online Tool How to Create a Quality Control Checklist using the SWS Online Tool This document explains How to Create a Quality Control Checklist using the SWS Online Tool. PDF icon creating_qc_checklist_from_sws_tool.pdf More Documents & Publications How to align field guides and standards to the Standard Work Specifications SWS Online Tool now includes Multifamily Content, plus a How-To Webinar Assorted QCI

  10. LNG fleet increases in size and capabilities

    SciTech Connect (OSTI)

    Linser, H.J. Jr.; Drudy, M.J.; Endrizzi, F.; Urbanelli, A.A.

    1997-06-02

    The LNG fleet as of early 1997 consisted of 99 vessels with total cargo capacity of 10.7 million cu m, equivalent to approximately 4.5 million tons. One of the newest additions to the fleet, the 137,000-cu m tanker Al Zubarah, is five times the size of the original commercial vessel Methane Princess. Al Zubarah`s first loading of more than 60,000 tons occurred in December 1996 for deliver to Japanese buyers from the newly commissioned Qatargas LNG plant at Ras Laffan. That size cargo contains enough clean-burning energy to heat 60,000 homes in Japan for 1 month. Measuring nearly 1,000 ft long, the tanker is among the largest in the industry fleet and joined 70 other vessels of more than 100,000 cu m. Most LNG tankers built since 1975 have been larger-capacity vessels. The paper discusses LNG shipping requirements, containment systems, vessel design, propulsion, construction, operations and maintenance, and the future for larger vessels.

  11. Parameterizing Size Distribution in Ice Clouds

    SciTech Connect (OSTI)

    DeSlover, Daniel; Mitchell, David L.

    2009-09-25

    PARAMETERIZING SIZE DISTRIBUTIONS IN ICE CLOUDS David L. Mitchell and Daniel H. DeSlover ABSTRACT An outstanding problem that contributes considerable uncertainty to Global Climate Model (GCM) predictions of future climate is the characterization of ice particle sizes in cirrus clouds. Recent parameterizations of ice cloud effective diameter differ by a factor of three, which, for overcast conditions, often translate to changes in outgoing longwave radiation (OLR) of 55 W m-2 or more. Much of this uncertainty in cirrus particle sizes is related to the problem of ice particle shattering during in situ sampling of the ice particle size distribution (PSD). Ice particles often shatter into many smaller ice fragments upon collision with the rim of the probe inlet tube. These small ice artifacts are counted as real ice crystals, resulting in anomalously high concentrations of small ice crystals (D < 100 m) and underestimates of the mean and effective size of the PSD. Half of the cirrus cloud optical depth calculated from these in situ measurements can be due to this shattering phenomenon. Another challenge is the determination of ice and liquid water amounts in mixed phase clouds. Mixed phase clouds in the Arctic contain mostly liquid water, and the presence of ice is important for determining their lifecycle. Colder high clouds between -20 and -36 oC may also be mixed phase but in this case their condensate is mostly ice with low levels of liquid water. Rather than affecting their lifecycle, the presence of liquid dramatically affects the cloud optical properties, which affects cloud-climate feedback processes in GCMs. This project has made advancements in solving both of these problems. Regarding the first problem, PSD in ice clouds are uncertain due to the inability to reliably measure the concentrations of the smallest crystals (D < 100 m), known as the small mode. Rather than using in situ probe measurements aboard aircraft, we employed a treatment of ice cloud optical properties formulated in terms of PSD parameters in combination with remote measurements of thermal radiances to characterize the small mode. This is possible since the absorption efficiency (Qabs) of small mode crystals is larger at 12 m wavelength relative to 11 m wavelength due to the process of wave resonance or photon tunneling more active at 12 m. This makes the 12/11 m absorption optical depth ratio (or equivalently the 12/11 m Qabs ratio) a means for detecting the relative concentration of small ice particles in cirrus. Using this principle, this project tested and developed PSD schemes that can help characterize cirrus clouds at each of the three ARM sites: SGP, NSA and TWP. This was the main effort of this project. These PSD schemes and ice sedimentation velocities predicted from them have been used to test the new cirrus microphysics parameterization in the GCM known as the Community Climate Systems Model (CCSM) as part of an ongoing collaboration with NCAR. Regarding the second problem, we developed and did preliminary testing on a passive thermal method for retrieving the total water path (TWP) of Arctic mixed phase clouds where TWPs are often in the range of 20 to 130 g m-2 (difficult for microwave radiometers to accurately measure). We also developed a new radar method for retrieving the cloud ice water content (IWC), which can be vertically integrated to yield the ice water path (IWP). These techniques were combined to determine the IWP and liquid water path (LWP) in Arctic clouds, and hence the fraction of ice and liquid water. We have tested this approach using a case study from the ARM field campaign called M-PACE (Mixed-Phase Arctic Cloud Experiment). This research led to a new satellite remote sensing method that appears promising for detecting low levels of liquid water in high clouds typically between -20 and -36 oC. We hope to develop this method in future research.

  12. Polar On-Line Acquisition Relay and Transmission System (POLARATS)

    SciTech Connect (OSTI)

    Yuracko, K.

    2004-07-15

    POLARATS (Polar On-Line Acquisition Relay And Transmission System) is being developed by YAHSGS LLC (YAHSGS) and Oak Ridge National Laboratory (ORNL) to provide remote, unattended monitoring of environmental parameters under harsh environmental conditions. In particular, instrumental design and engineering is oriented towards protection of human health in the Arctic, and with the additional goal of advancing Arctic education and research. POLARATS will obtain and transmit environmental data from hardened monitoring devices deployed in locations important to understanding atmospheric and aquatic pollutant migration as it is biomagnified in Arctic food chains. An Internet- and personal computer (PC)-based educational module will provide real time sensor data, on-line educational content, and will be integrated with workbooks and textbooks for use in middle and high school science programs. The educational elements of POLARATS include an Internet-based educational module that will instruct students in the use of the data and how those data fit into changing Arctic environments and food chains. POLARATS will: (1) Enable students, members of the community, and scientific researchers to monitor local environmental conditions in real time over the Internet; and (2) Provide additional educational benefits through integration with middle- and high-school science curricula. Information will be relayed from POLARATS devices to classrooms and libraries along with custom-designed POLARATS teaching materials that will be integrated into existing curricula to enhance the educational benefits realized from the information obtained.

  13. Pulsed Neurton Elemental On-Line Material Analyzer

    DOE Patents [OSTI]

    Vourvopoulos, George (Bowling Green, KY)

    2002-08-20

    An on-line material analyzer which utilizes pulsed neutron generation in order to determine the composition of material flowing through the apparatus. The on-line elemental material analyzer is based on a pulsed neutron generator. The elements in the material interact with the fast and thermal neutrons produced from the pulsed generator. Spectra of gamma-rays produced from fast neutrons interacting with elements of the material are analyzed and stored separately from spectra produced from thermal neutron reactions. Measurements of neutron activation takes place separately from the above reactions and at a distance from the neutron generator. A primary passageway allows the material to flow through at a constant rate of speed and operators to provide data corresponding to fast and thermal neutron reactions. A secondary passageway meters the material to allow for neutron activation analysis. The apparatus also has the capability to determine the density of the flowed material. Finally, the apparatus continually utilizes a neutron detector in order to normalize the yield of the gamma ray detectors and thereby automatically calibrates and adjusts the spectra data for fluctuations in neutron generation.

  14. INTERIM REPORT ON CONCRETE DEGRADATION MECHANISMS AND ONLINE MONITORING TECHNIQUES

    SciTech Connect (OSTI)

    Mahadevan, Sankaran; Agarwal, Vivek; Neal, Kyle; Kosson, David; Adams, Douglas

    2014-09-01

    The existing fleets of nuclear power plants in the United States have initial operating licenses of 40 years, though most these plants have applied for and received license extensions. As plant structures, systems, and components age, their useful lifeconsidering both structural integrity and performanceis reduced as a result of deterioration of the materials. The online monitoring of concrete structure conducted under the Advanced Instrumentation, Information, and Control Technologies Pathway of the Light Water Reactor Sustainability program at Idaho National Laboratory will develop and demonstrate concrete structures health monitoring capabilities. Assessment and management of aging concrete structures in nuclear plants require a more systematic approach than simple reliance on existing code margins of safety. Therefore, the structural health monitoring is required to produce actionable information regarding structural integrity that supports operational and maintenance decisions. Through this research project, several national laboratories and Vanderbilt University proposes to develop a framework of research activities for the health monitoring of nuclear power plant concrete structures that includes integration of four elementsdamage modeling, monitoring, data analytics, and uncertainty quantification. This report briefly discusses available techniques and ongoing challenges in each of the four elements of the proposed framework with emphasis on degradation mechanisms and online monitoring techniques.

  15. Offshore Lubricants Market Size | OpenEI Community

    Open Energy Info (EERE)

    Offshore Lubricants Market Size Home There are currently no posts in this category. Syndicate content...

  16. Coal Fired Power Generation Market Size | OpenEI Community

    Open Energy Info (EERE)

    Coal Fired Power Generation Market Size Home There are currently no posts in this category. Syndicate...

  17. Reduce Pumping Costs Through Optimum Pipe Sizing | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Pumping Costs Through Optimum Pipe Sizing Reduce Pumping Costs Through Optimum Pipe Sizing This tip sheet discusses how to reduce pumping system costs through optimum pipe sizing. PUMPING SYSTEMS TIP SHEET #9 PDF icon Reduce Pumping Costs Through Optimum Pipe Sizing (October 2005) More Documents & Publications Select an Energy-Efficient Centrifugal Pump Effect of Intake on Compressor Performance Pump Selection Considerations

  18. Sizing a New Water Heater | Department of Energy

    Energy Savers [EERE]

    Heat & Cool » Water Heating » Sizing a New Water Heater Sizing a New Water Heater Is your water heater the right size for you house? | Photo credit ENERGY STAR® Is your water heater the right size for you house? | Photo credit ENERGY STAR® A properly sized water heater will meet your household's hot water needs while operating more efficiently. Therefore, before purchasing a water heater, make sure it's the correct size. Here you'll find information about how to size these systems:

  19. Sizing a New Water Heater | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Sizing a New Water Heater Sizing a New Water Heater Is your water heater the right size for you house? | Photo credit ENERGY STAR® Is your water heater the right size for you house? | Photo credit ENERGY STAR® A properly sized water heater will meet your household's hot water needs while operating more efficiently. Therefore, before purchasing a water heater, make sure it's the correct size. Here you'll find information about how to size these systems: Tankless or demand-type water heaters

  20. New program sizes pressure-relief drums

    SciTech Connect (OSTI)

    Durand, A.A.; Osorio, R.A.; Suarez, R.H.

    1996-05-06

    In accordance with API Recommended Practice 521, a new procedure has been developed for the design of relief drums. The calculation method determines by convergence the most economical length-to-diameter ratio for gas-liquid separation vessels. Drum sizing is based on the separation of a two-phase stream, taking into account the special condition of intermittent flow. Design parameters such as settling velocity and residence time also must be calculated to determine an optimum design. A new program based on a programmable algorithm can be converted from basic language to any other computer language to facilitate vessel-design computations. The program quickly and efficiently computes design values for relief systems used in refineries and petrochemical plants.

  1. Metagenomics, metaMicrobesOnline and Kbase Data Integration (MICW - Metagenomics Informatics Challenges Workshop: 10K Genomes at a Time)

    ScienceCinema (OSTI)

    Dehal, Paramvir [LBNL

    2013-01-22

    Berkeley Lab's Paramvir Dehal on "Managing and Storing large Datasets in MicrobesOnline, metaMicrobesOnline and the DOE Knowledgebase" at the Metagenomics Informatics Challenges Workshop held at the DOE JGI on October 12-13, 2011.

  2. Qualification of Three On-line Slurry Monitoring Devices for Application during Waste Retrieval Operations at DOE Sites

    SciTech Connect (OSTI)

    Bontha, Jagannadha R.; Bamberger, Judith A.; Hylton, Tom D.; May, T. H.

    2000-10-18

    Qualification of Three On-line Slurry Monitoring Devices for Application during Waste Retrieval Operations at DOE Sites

  3. Solar Trackers Market Size | OpenEI Community

    Open Energy Info (EERE)

    Solar Trackers Market Size Home John55364's picture Submitted by John55364(100) Contributor 12 May, 2015 - 03:54 Solar Trackers Market - Global Industry Analysis, Size, Share,...

  4. Global Nuclear Energy Partnership Triples in Size to 16 Members...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Global Nuclear Energy Partnership Triples in Size to 16 Members Global Nuclear Energy Partnership Triples in Size to 16 Members September 16, 2007 - 2:33pm Addthis Nations Sign On...

  5. Quantum-size-controlled photoelectrochemical etching of semiconductor

    Office of Scientific and Technical Information (OSTI)

    nanostructures (Patent) | SciTech Connect Patent: Quantum-size-controlled photoelectrochemical etching of semiconductor nanostructures Citation Details In-Document Search Title: Quantum-size-controlled photoelectrochemical etching of semiconductor nanostructures Quantum-size-controlled photoelectrochemical (QSC-PEC) etching provides a new route to the precision fabrication of epitaxial semiconductor nanostructures in the sub-10-nm size regime. For example, quantum dots (QDs) can be

  6. Method for determining aerosol particle size device for determining aerosol particle size

    DOE Patents [OSTI]

    Novick, Vincent J.

    1998-01-01

    A method for determining the mass median diameter D of particles contained in a fluid is provided wherein the data of the mass of a pre-exposed and then a post-exposed filter is mathematically combined with data concerning the pressure differential across the same filter before and then after exposure to a particle-laden stream. A device for measuring particle size is also provided wherein the device utilizes the above-method for mathematically combining the easily quantifiable data.

  7. Femtosecond laser-induced size reduction of carbon nanodots in solution: Effect of laser fluence, spot size, and irradiation time

    SciTech Connect (OSTI)

    Nguyen, Vanthan; Yan, Lihe Si, Jinhai; Hou, Xun

    2015-02-28

    Photoluminescent carbon nanodots (C-dots) with size tunability and uniformity were fabricated in polyethylene glycol (PEG{sub 200N}) solution using femtosecond laser ablation method. The size distributions and photoluminescence (PL) properties of C-dots are well controlled by adjusting the combined parameters of laser fluence, spot size, and irradiation time. The size reduction efficiency of the C-dots progressively increases with decreasing laser fluence and spot size. The optimal PL spectra are red-shifted and the quantum yields decrease with the increase in C-dots size, which could be attributed to the more complex surface functional groups attached on C-dots induced at higher laser fluence and larger spot size. Moreover, an increase in irradiation time leads to a decrease in size of C-dots, but long-time irradiation will result in the generation of complex functional groups on C-dots, subsequently the PL spectra are red-shifted.

  8. On-Line Travel Reservations through "Concur Travel" | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    On-Line Travel Reservations through "Concur Travel" What is Concur Travel (formerly known as Cliqbook)? Concur Travel is an on-line booking tool. Concur Travel is independent of Travel and Transport and it is a software that Travel and Transport has a software license with as a part of the Travel contract with Iowa State University. Concur Travel uses the GDS (Global Distribution Systems). Concur Travel should provide a more extensive flight search than other similar on-line travel

  9. Online Voting Begins for "America's Next Top Energy Innovator" |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Online Voting Begins for "America's Next Top Energy Innovator" Online Voting Begins for "America's Next Top Energy Innovator" January 26, 2012 - 10:17am Addthis WASHINGTON, D.C. - The U.S. Department of Energy (DOE) today invited Americans to vote online for the most innovative and promising start-up companies in the "America's Next Top Energy Innovator" challenge. Voting will end at 8:59 a.m. EST. on Monday, February 6, and the top start-up

  10. Solar and the City: Online Map to Show NYC's Solar Potential | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy and the City: Online Map to Show NYC's Solar Potential Solar and the City: Online Map to Show NYC's Solar Potential October 13, 2010 - 11:32am Addthis Stephen Graff Former Writer & editor for Energy Empowers, EERE What does this project do? The online tool allows people to determine solar potential of homes and businesses. Think Google Maps for solar. Type in an address and instead of directions to a restaurant or movie theater, a home's solar potential comes up-and not just

  11. SWS Online Tool now includes Multifamily Content, plus a How-To Webinar |

    Energy Savers [EERE]

    Department of Energy Online Tool now includes Multifamily Content, plus a How-To Webinar SWS Online Tool now includes Multifamily Content, plus a How-To Webinar This announcement contains information on the integration of multifamily content in the SWS Online Tool, and a How-To Webinar on August 27, 2013. PDF icon mf_content_now_available.pdf More Documents & Publications The Standard Work Specifications for Single-Family Home Energy Upgrades are now available€ at your fingertips!

  12. On-line DNA analysis system with rapid thermal cycling

    DOE Patents [OSTI]

    Swerdlow, H.P.; Wittwer, C.T.

    1999-08-10

    This application describes an apparatus particularly suited for subjecting biological samples to any necessary sample preparation tasks, subjecting the sample to rapid thermal cycling, and then subjecting the sample to subsequent on-line analysis using one or more of a number of analytical techniques. The apparatus includes a chromatography device including an injection means, a chromatography pump, and a chromatography column. In addition, the apparatus also contains a capillary electrophoresis device consisting of a capillary electrophoresis column with an inlet and outlet end, a means of injection, and means of applying a high voltage to cause the differential migration of species of interest through the capillary column. Effluent from the liquid chromatography column passes over the inlet end of the capillary electrophoresis column through a tee structure and when the loading of the capillary electrophoresis column is desired, a voltage supply is activated at a precise voltage and polarity over a specific duration to cause sample species to be diverted from the flowing stream to the capillary electrophoresis column. A laser induced fluorescence detector preferably is used to analyze the products separated while in the electrophoresis column. 6 figs.

  13. On-line DNA analysis system with rapid thermal cycling

    DOE Patents [OSTI]

    Swerdlow, Harold P. (Salt Lake City, UT); Wittwer, Carl T. (Salt Lake City, UT)

    1999-01-01

    An apparatus particularly suited for subjecting biological samples to any necessary sample preparation tasks, subjecting the sample to rapid thermal cycling, and then subjecting the sample to subsequent on-line analysis using one or more of a number of analytical techniques. The apparatus includes a chromatography device including an injection means, a chromatography pump, and a chromatography column. In addition, the apparatus also contains a capillary electrophoresis device consisting of a capillary electrophoresis column with an inlet and outlet end, a means of injection, and means of applying a high voltage to cause the differential migration of species of interest through the capillary column. Effluent from the liquid chromatography column passes over the inlet end of the capillary electrophoresis column through a tee structure and when the loading of the capillary electrophoresis column is desired, a voltage supply is activated at a precise voltage and polarity over a specific duration to cause sample species to be diverted from the flowing stream to the capillary electrophoresis column. A laser induced fluorescence detector preferably is used to analyze the products separated while in the electrophoresis column.

  14. Vehicle Technologies Office Merit Review 2014: On-Line Weld NDE with IR Thermography

    Broader source: Energy.gov [DOE]

    Presentation given by Oak Ridge National Laboratory at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about on-line weld...

  15. OPM'S ONLINE COURSE: "LINKING AND DEVELOPING MEASURABLE SES RESULTS-FOCUSED PERFORMANCE REQUIREMENTS

    Broader source: Energy.gov [DOE]

    OPM is pleased to share an online course developed for senior executives entitled, “Linking and Developing Measurable SES Results-Focused Performance Requirements http://www.hru.gov/course_catalog...

  16. OPM's Online Course: "Linking and Developing Measurable SES Results-Focused Performance Requirements

    Broader source: Energy.gov [DOE]

    OPM is pleased to share an online course developed for senior executives entitled, “Linking and Developing Measurable SES Results-Focused Performance Requirements http://www.hru.gov/course_catalog...

  17. IEA-GIA ExCo - National Geothermal Data System and Online Tools...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Geothermal Data System and Online Tools National Geothermal Data System presentation by Jay Nathwani at the September 30, 2011 IEA-GIA ExCo conference in London. PDF icon...

  18. On-line chemical composition analyzer development. Status report, February 1, 1993--April 30, 1993

    SciTech Connect (OSTI)

    Garrison, A.A.

    1993-06-01

    This report relates to the development of an on-line Raman analyzer for control of a distillation column. It is divided into: program issues, experimental control system evaluation, energy savings analysis, and reliability analysis. (DLC)

  19. THE SIZE DISTRIBUTION OF THE NEPTUNE TROJANS AND THE MISSING INTERMEDIATE-SIZED PLANETESIMALS

    SciTech Connect (OSTI)

    Sheppard, Scott S.; Trujillo, Chadwick A.

    2010-11-10

    We present an ultra-deep survey for Neptune Trojans using the Subaru 8.2 m and Magellan 6.5 m telescopes. The survey reached a 50% detection efficiency in the R band at m{sub R} = 25.7 mag and covered 49 deg{sup 2} of sky. m{sub R} = 25.7 mag corresponds to Neptune Trojans that are about 16 km in radius (assuming an albedo of 0.05). A paucity of smaller Neptune Trojans (radii < 45 km) compared with larger ones was found. The brightest Neptune Trojans appear to follow a steep power-law slope (q = 5 {+-} 1) similar to the brightest objects in the other known stable reservoirs such as the Kuiper Belt, Jupiter Trojans, and main belt asteroids. We find a roll-over for the Neptune Trojans that occurs around a radius of r = 45 {+-} 10 km (m{sub R} = 23.5 {+-} 0.3), which is also very similar to the other stable reservoirs. All the observed stable regions in the solar system show evidence for Missing Intermediate-Sized Planetesimals (MISPs). This indicates a primordial and not collisional origin, which suggests that planetesimal formation proceeded directly from small to large objects. The scarcity of intermediate- and smaller-sized Neptune Trojans may limit them as being a strong source for the short period comets.

  20. An Overview of NREL's Online Data Tool for Fuel Cell System-Derived

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Contaminants | Department of Energy An Overview of NREL's Online Data Tool for Fuel Cell System-Derived Contaminants An Overview of NREL's Online Data Tool for Fuel Cell System-Derived Contaminants Download presentation slides from the DOE Fuel Cell Technologies Office webinar "NREL's Fuel Cell Contaminant Database" held on May 27, 2014. PDF icon NREL's Fuel Cell Contaminant Database Webinar Slides More Documents & Publications Balance of Plant (BoP) Components Validation for

  1. Establishment of a Hub for the Light Water Reactor Sustainability Online Monitoring Community

    SciTech Connect (OSTI)

    Nancy J. Lybeck; Magdy S. Tawfik; Binh T. Pham

    2011-08-01

    Implementation of online monitoring and prognostics in existing U.S. nuclear power plants will involve coordinating the efforts of national laboratories, utilities, universities, and private companies. Internet-based collaborative work environments provide necessary communication tools to facilitate interaction between geographically diverse participants. Available technologies were considered, and a collaborative workspace was established at INL as a hub for the light water reactor sustainability online monitoring community.

  2. On-Line ALARA Project Submittal Form to report ALARA Project Descriptions

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    to REMS | Department of Energy ALARA Project Submittal Form to report ALARA Project Descriptions to REMS On-Line ALARA Project Submittal Form to report ALARA Project Descriptions to REMS May 30, 2014 On-line ALARA Project Submittal Form to report ALARA project descriptions to REMS. ALARA activities descriptions are provided for the purpose of sharing strategies and techniques that have shown promise in the reduction of radiation exposure. These descriptions are part of the annual

  3. On-Line User Survey Form to provide feedback for the DOE Occupational

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Radiation Exposure Report | Department of Energy User Survey Form to provide feedback for the DOE Occupational Radiation Exposure Report On-Line User Survey Form to provide feedback for the DOE Occupational Radiation Exposure Report May 30, 2014 Radiation Exposure Monitoring System (REMS) User Feedback Survey. PDF icon On-Line User Survey Form to provide feedback for the DOE Occupational Radiation Exposure Report More Documents & Publications Annual DOE Occupational Radiation Exposure |

  4. An Overview of NREL's Online Data Tool for Fuel Cell System-Derived Contaminants

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    An Overview of NREL's Online Data Tool for Fuel Cell System-Derived Contaminants Dave Peterson U.S. Department of Energy Fuel Cell Technologies Office Huyen N. Dinh National Renewable Energy Laboratory NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC. An Overview of NREL's Online Data Tool for Fuel Cell System- Derived Contaminants Venue: DOE EERE FCTO Webinar Presenter: Huyen

  5. Vote online for America's Next Top Energy Innovator - News Releases | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Vote online for America's Next Top Energy Innovator NREL contributed to three of the14 breakthrough technologies January 27, 2012 The U.S. Department of Energy (DOE) will name America's Next Top Energy Innovator in February and wants Americans to vote online for their favorites among 14 technologies that could make huge differences in the near future. Technologies from the DOE's National Renewable Energy Laboratory (NREL) are being used by three of the nominees, helping move the laboratory's

  6. Energy Information Online | OSTI, US Dept of Energy, Office of Scientific

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Technical Information Energy Information Online Energy Science and Technology Database (EDB) and Nuclear Science Abstracts (NSA) The Department of Energy's legacy bibliographic databases, Energy Science and Technology and Nuclear Science Abstracts, are searchable through commercial vendors, online and via CD-ROM. These databases provide complete bibliographic information and abstracts for technical reports, as well as other materials received, such as journal articles, conference papers

  7. Resonance ionization laser ion sources for on-line isotope separators

    Office of Scientific and Technical Information (OSTI)

    (invited) (Journal Article) | SciTech Connect Resonance ionization laser ion sources for on-line isotope separators (invited) Citation Details In-Document Search Title: Resonance ionization laser ion sources for on-line isotope separators (invited) A Resonance Ionization Laser Ion Source (RILIS) is today considered an essential component of the majority of Isotope Separator On Line (ISOL) facilities; there are seven laser ion sources currently operational at ISOL facilities worldwide and

  8. Microsoft Word - DOE Announces International Agreement on Global Science Online Gateway

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    FOR IMMEDIATE RELEASE Jeff Sherwood, (202) 586-5806 Thursday June 12, 2008 Cathey Daniels, (865) 576-9539 DOE Announces International Agreement on Global Science Online Gateway WASHINGTON, DC - The U.S. Department of Energy (DOE) today announced the establishment of a multilateral alliance to govern the rapidly growing online gateway to international scientific research information--WorldWideScience.org. Officials from organizations representing 38 countries formalized their commitment today in

  9. Visit the National Academies Press online, the authoritative source for all book

    National Nuclear Security Administration (NNSA)

    Visit the National Academies Press online, the authoritative source for all books from the National Academy of Sciences, the National Academy of Engineering, the Institute of Medicine, and the National Research Council: * Download hundreds of free books in PDF * Read thousands of books online, free * Sign up to be notified when new books are published * Purchase printed books * Purchase PDFs * Explore with our innovative research tools Thank you for downloading this free PDF. If you have

  10. IEA-GIA ExCo - National Geothermal Data System and Online Tools |

    Office of Environmental Management (EM)

    Department of Energy IEA-GIA ExCo - National Geothermal Data System and Online Tools IEA-GIA ExCo - National Geothermal Data System and Online Tools National Geothermal Data System presentation by Jay Nathwani at the September 30, 2011 IEA-GIA ExCo conference in London. PDF icon gtp_iea-gia_presentation_nathwani_9-30-11.pdf More Documents & Publications International Partnership for Geothermal Technology - 2012 Peer Review Presentation Innovative Exploration Technologies Subprogram

  11. CBEI: Coordinating RTUs in Small and Medium Sized Commercial Buildings -

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2015 Peer Review | Department of Energy Coordinating RTUs in Small and Medium Sized Commercial Buildings - 2015 Peer Review CBEI: Coordinating RTUs in Small and Medium Sized Commercial Buildings - 2015 Peer Review Presenter: James Braun, Purdue University View the Presentation PDF icon CBEI: Coordinating RTUs in Small and Medium Sized Commercial Buildings - 2015 Peer Review More Documents & Publications Control and Diagnostics for Rooftop Units - 2014 BTO Peer Review CBEI: Lessons

  12. SBA Increases Size Standards for Waste Remediation Services &

    Energy Savers [EERE]

    Information/Admin Support | Department of Energy Increases Size Standards for Waste Remediation Services & Information/Admin Support SBA Increases Size Standards for Waste Remediation Services & Information/Admin Support December 12, 2012 - 10:22am Addthis John Hale III John Hale III Director, Office of Small and Disadvantaged Business Utilization Earlier this week, the U.S. Small Business Administration announced that they have revised size definitions for small businesses in

  13. Fiber Sizing Sensor and Controller | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Fiber Sizing Sensor and Controller Fiber Sizing Sensor and Controller Revolutionary Optical Technology Provides Rapid Measurement of Large Samples of Fiber Diameters Fiber size (or denier) has a significant effect on the performance of fiber-based products, such as filters, insulation, and composites. Fiber samples are generally characterized by optical or electron microscopy. Flow resistance of a sample of fibers (e.g., by the Micronaire(tm) technique) is also used to estimate the mean fiber

  14. Development of Model Filtration Media for Investigating Size-Dependent

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Filtration Efficiency | Department of Energy Model Filtration Media for Investigating Size-Dependent Filtration Efficiency Development of Model Filtration Media for Investigating Size-Dependent Filtration Efficiency A novel method for fabricating custom porous filtration media for emission control has been developed. Controlled pore sizes could be used to optimize high-capture efficiency with low backpressure. PDF icon p-25_strzelec.pdf More Documents & Publications Fuel-Neutral Studies

  15. Sizing a New Water Heater | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    systems: Tankless or demand-type water heaters Solar water heating system Storage and heat pump (with tank) water heaters. For sizing combination water and space heating systems --...

  16. Property:Incentive/EligSysSize | Open Energy Information

    Open Energy Info (EERE)

    minimum
    Recycled Energy: 15 Megawatt maximum Alameda Municipal Power - Solar Photovoltaics Rebate Program (California) + Maximum size is 1 MW or 110% of customer's...

  17. Solar Trackers Market - Global Industry Analysis, Size, Share...

    Open Energy Info (EERE)

    Solar Trackers Market - Global Industry Analysis, Size, Share, Growth, Trends and Forecast, 2010 - 2020 Home > Groups > Increase Natural Gas Energy Efficiency John55364's picture...

  18. Efficient Algorithm for Locating and Sizing Series Compensation...

    Office of Scientific and Technical Information (OSTI)

    Compensation Devices in Large Transmission Grids: Model Implementation We explore optimization methods for planning the placement, sizing and operations of Flexible Alternating...

  19. Scalable Heuristics for Planning, Placement and Sizing of Flexible...

    Office of Scientific and Technical Information (OSTI)

    SC and SVC devices are represented by modification of the transmission line inductances and reactive power nodal corrections respectively. We find one placement and sizing of FACTs ...

  20. CBEI: HVAC Packages for Small and Medium Sized Commercial Buildings...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CBEI: HVAC Packages for Small and Medium Sized Commercial Buildings - 2015 Peer Review Presenter: Russell Taylor, United Technologies Research Center View the Presentation PDF icon ...

  1. Overview of Detailed Chemical Speciation and Particle Sizing...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Diesel Exhaust, Both Real Time and Filter Based Measurements Overview of Detailed Chemical Speciation and Particle Sizing for Diesel Exhaust, Both Real Time and Filter Based ...

  2. Correlating Size and Composition-Dependent Effects with Magnetic...

    Office of Scientific and Technical Information (OSTI)

    Correlating Size and Composition-Dependent Effects with Magnetic, Mssbauer, and Pair Distribution Function Measurements in a Family of Catalytically Active Ferrite Nanoparticles ...

  3. CBEI: Coordinating RTUs in Small and Medium Sized Commercial...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    RTUs in Small and Medium Sized Commercial Buildings - 2015 Peer Review Presenter: James Braun, Purdue University View the Presentation PDF icon CBEI: Coordinating RTUs in...

  4. SBA Increases Size Standards for Waste Remediation Services ...

    Broader source: Energy.gov (indexed) [DOE]

    one current revenue-based size standard in NAICS Sector 21: Mining, Quarrying, and Oil and Gas Extraction. SBA evaluated four industries in this sector to determine whether...

  5. TVA - Mid-Sized Renewable Standard Offer Program | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    kWh Summary The Tennessee Valley Authority (TVA) now compliments the small generation Green Power Providers Program by providing incentives for mid-sized renewable energy...

  6. Droplet sizes, dynamics and deposition in vertical annular flow

    SciTech Connect (OSTI)

    Lopes, J C.B.; Dukler, A E

    1985-10-01

    The role of droplets in vertical upwards annular flow is investigated, focusing on the droplet size distributions, dynamics, and deposition phenomena. An experimental program was performed based on a new laser optical technique developed in these laboratories and implemented here for annular flow. This permitted the simultaneous measurement of droplet size, axial and radial velocity. The dependence of droplet size distributions on flow conditions is analyzed. The Upper-Log Normal function proves to be a good model for the size distribution. The mechanism controlling the maximum stable drop size was found to result from the interaction of the pressure fluctuations of the turbulent flow of the gas core with the droplet. The average axial droplet velocity showed a weak dependence on gas rates. This can be explained once the droplet size distribution and droplet size-velocity relationship are analyzed simultaneously. The surprising result from the droplet conditional analysis is that larger droplet travel faster than smaller ones. This dependence cannot be explained if the drag curves used do not take into account the high levels of turbulence present in the gas core in annular flow. If these are considered, then interesting new situations of multiplicity and stability of droplet terminal velocities are encountered. Also, the observed size-velocity relationship can be explained. A droplet deposition is formulated based on the particle inertia control. This permitted the calculation of rates of drop deposition directly from the droplet size and velocities data.

  7. On-line maintenance methodology development and its applications

    SciTech Connect (OSTI)

    Kim, J.; Jae, M.

    2012-07-01

    With the increasing economic pressures being faced and the potential for shortening outage times under the conditions of deregulated electricity markets in the world, licensees are motivated to get an increasing amount of the on-line maintenance (OLM). The benefits of the OLM includes increased system and plant reliability, reduction of plant equipment and system material condition deficiencies that could adversely impact operations, and reduction of work scope during plant refueling outages. In Korea, allowance guidelines of risk assessment is specified in the safety regulation guidelines 16.7 and 16.8 of the Korea Inst. of Nuclear Safety (KINS), which is 'General guidelines of Risk-informed application for requesting permission of changes' and 'Requesting permission of changes of Risk-informed application for Technical Specification'. We select the emergency diesel generator (EDG) of the Ulchin unit 3 and 4 for risk assessment analysis by applying configuration changes. The EDG which has plant safety level IE belongs to on-site standby power (A, B train EDG) in electric distribution system. The EDG is important component because it should maintain standby status during plant is operating, therefore we select the EDG for target component of risk assessment analysis. The risk assessment is limited to CDF. The risk assessment is performed by using AIMS-PSA Release2. We evaluate CDF by applying the configuration changes with some assumptions. Evaluation of the full power operation and Low power/Shut down operation was performed. This study has been performed for introducing a methodology and performing risk assessment. (authors)

  8. Method of producing submicron size particles and product produced thereby

    DOE Patents [OSTI]

    Bourne, R.S.; Eichman, C.C.; Welbon, W.W.

    1988-05-11

    Submicron size particles are produced by using a sputtering process to deposit particles into a liquid. The liquid is processed to recover the particles therefrom, and the particles have sizes in the range of twenty to two hundred Angstroms. Either metallic or non-metallic particles can be produced, and the metallic particles can be used in ''metallic inks.'' 4 figs.

  9. Quality assurance for online adapted treatment plans: Benchmarking and delivery monitoring simulation

    SciTech Connect (OSTI)

    Li, Taoran Wu, Qiuwen; Yang, Yun; Rodrigues, Anna; Yin, Fang-Fang; Jackie Wu, Q.

    2015-01-15

    Purpose: An important challenge facing online adaptive radiation therapy is the development of feasible and efficient quality assurance (QA). This project aimed to validate the deliverability of online adapted plans and develop a proof-of-concept online delivery monitoring system for online adaptive radiation therapy QA. Methods: The first part of this project benchmarked automatically online adapted prostate treatment plans using traditional portal dosimetry IMRT QA. The portal dosimetry QA results of online adapted plans were compared to original (unadapted) plans as well as randomly selected prostate IMRT plans from our clinic. In the second part, an online delivery monitoring system was designed and validated via a simulated treatment with intentional multileaf collimator (MLC) errors. This system was based on inputs from the dynamic machine information (DMI), which continuously reports actual MLC positions and machine monitor units (MUs) at intervals of 50 ms or less during delivery. Based on the DMI, the system performed two levels of monitoring/verification during the delivery: (1) dynamic monitoring of cumulative fluence errors resulting from leaf position deviations and visualization using fluence error maps (FEMs); and (2) verification of MLC positions against the treatment plan for potential errors in MLC motion and data transfer at each control point. Validation of the online delivery monitoring system was performed by introducing intentional systematic MLC errors (ranging from 0.5 to 2 mm) to the DMI files for both leaf banks. These DMI files were analyzed by the proposed system to evaluate the systems performance in quantifying errors and revealing the source of errors, as well as to understand patterns in the FEMs. In addition, FEMs from 210 actual prostate IMRT beams were analyzed using the proposed system to further validate its ability to catch and identify errors, as well as establish error magnitude baselines for prostate IMRT delivery. Results: Online adapted plans were found to have similar delivery accuracy in comparison to clinical IMRT plans when validated with portal dosimetry IMRT QA. FEMs for the simulated deliveries with intentional MLC errors exhibited distinct patterns for different MLC error magnitudes and directions, indicating that the proposed delivery monitoring system is highly specific in detecting the source of errors. Implementing the proposed QA system for online adapted plans revealed excellent delivery accuracy: over 99% of leaf position differences were within 0.5 mm, and >99% of pixels in the FEMs had fluence errors within 0.5 MU. Patterns present in the FEMs and MLC control point analysis for actual patient cases agreed with the error pattern analysis results, further validating the systems ability to reveal and differentiate MLC deviations. Calculation of the fluence map based on the DMI was performed within 2 ms after receiving each DMI input. Conclusions: The proposed online delivery monitoring system requires minimal additional resources and time commitment to the current clinical workflow while still maintaining high sensitivity to leaf position errors and specificity to error types. The presented online delivery monitoring system therefore represents a promising QA system candidate for online adaptive radiation therapy.

  10. Webinar: An Overview of NREL’s Online Data Tool for Fuel Cell System-Derived Contaminants

    Broader source: Energy.gov [DOE]

    The Fuel Cell Technologies Office will present a webinar on the National Renewable Energy Laboratory's online data tool for fuel cell system-derived contaminants.

  11. MicrobesOnline: an integrated portal for comparative and functional genomics

    SciTech Connect (OSTI)

    Dehal, Paramvir S.; Joachimiak, Marcin P.; Price, Morgan N.; Bates, John T.; Baumohl, Jason K.; Chivian, Dylan; Friedland, Greg D.; Huang, Katherine H.; Keller, Keith; Novichkov, Pavel S.; Dubchak, Inna L.; Alm, Eric J.; Arkin, Adam P.

    2009-09-17

    Since 2003, MicrobesOnline (http://www.microbesonline.org) has been providing a community resource for comparative and functional genome analysis. The portal includes over 1000 complete genomes of bacteria, archaea and fungi and thousands of expression microarrays from diverse organisms ranging from model organisms such as Escherichia coli and Saccharomyces cerevisiae to environmental microbes such as Desulfovibrio vulgaris and Shewanella oneidensis. To assist in annotating genes and in reconstructing their evolutionary history, MicrobesOnline includes a comparative genome browser based on phylogenetic trees for every gene family as well as a species tree. To identify co-regulated genes, MicrobesOnline can search for genes based on their expression profile, and provides tools for identifying regulatory motifs and seeing if they are conserved. MicrobesOnline also includes fast phylogenetic profile searches, comparative views of metabolic pathways, operon predictions, a workbench for sequence analysis and integration with RegTransBase and other microbial genome resources. The next update of MicrobesOnline will contain significant new functionality, including comparative analysis of metagenomic sequence data. Programmatic access to the database, along with source code and documentation, is available at http://microbesonline.org/programmers.html.

  12. MicrobesOnline: an integrated portal for comparative and functional genomics

    SciTech Connect (OSTI)

    Dehal, Paramvir; Joachimiak, Marcin; Price, Morgan; Bates, John; Baumohl, Jason; Chivian, Dylan; Friedland, Greg; Huang, Kathleen; Keller, Keith; Novichkov, Pavel; Dubchak, Inna; Alm, Eric; Arkin, Adam

    2011-07-14

    Since 2003, MicrobesOnline (http://www.microbesonline.org) has been providing a community resource for comparative and functional genome analysis. The portal includes over 1000 complete genomes of bacteria, archaea and fungi and thousands of expression microarrays from diverse organisms ranging from model organisms such as Escherichia coli and Saccharomyces cerevisiae to environmental microbes such as Desulfovibrio vulgaris and Shewanella oneidensis. To assist in annotating genes and in reconstructing their evolutionary history, MicrobesOnline includes a comparative genome browser based on phylogenetic trees for every gene family as well as a species tree. To identify co-regulated genes, MicrobesOnline can search for genes based on their expression profile, and provides tools for identifying regulatory motifs and seeing if they are conserved. MicrobesOnline also includes fast phylogenetic profile searches, comparative views of metabolic pathways, operon predictions, a workbench for sequence analysis and integration with RegTransBase and other microbial genome resources. The next update of MicrobesOnline will contain significant new functionality, including comparative analysis of metagenomic sequence data. Programmatic access to the database, along with source code and documentation, is available at http://microbesonline.org/programmers.html.

  13. Pore-size-distribution of cationic polyacrylamide hydrogels. Progress report

    SciTech Connect (OSTI)

    Kremer, M.; Prausnitz, J.M.

    1992-06-01

    The pore size distribution of a AAm/MAPTAC (acrylamide copolymerized with (3-methacrylamidopropyl)trimethylammonium chloride) hydrogel was investigated using Kuga`s mixed-solute-exclusion method, taking into account the wall effect. A Brownian-motion model is also used. Results show the feasibility of determining pore-size distribution of porous materials using the mixed-solute-exclusion method in conjunction with solution of the Fredholm equation; good agreement was obtained with experiment, even for bimodal pore structures. However, different pore size distributions were calculated for the two different probe-solutes (Dextran and poly(ethylene glycol/oxide)). Future work is outlined. 32 figs, 25 refs.

  14. Pore-size-distribution of cationic polyacrylamide hydrogels

    SciTech Connect (OSTI)

    Kremer, M.; Prausnitz, J.M.

    1992-06-01

    The pore size distribution of a AAm/MAPTAC (acrylamide copolymerized with (3-methacrylamidopropyl)trimethylammonium chloride) hydrogel was investigated using Kuga's mixed-solute-exclusion method, taking into account the wall effect. A Brownian-motion model is also used. Results show the feasibility of determining pore-size distribution of porous materials using the mixed-solute-exclusion method in conjunction with solution of the Fredholm equation; good agreement was obtained with experiment, even for bimodal pore structures. However, different pore size distributions were calculated for the two different probe-solutes (Dextran and poly(ethylene glycol/oxide)). Future work is outlined. 32 figs, 25 refs.

  15. Analysis of Online Social Networks to Understand Information Sharing Behaviors Through Social Cognitive Theory

    SciTech Connect (OSTI)

    Yoon, Hong-Jun; Tourassi, Georgia

    2014-01-01

    Analyzing the contents of online social networks is an effective process for monitoring and understanding peoples behaviors. Since the nature of conversation and information propagation is similar to traditional conversation and learning, one of the popular socio-cognitive methods, social cognitive theory was applied to online social networks to. Two major news topics about colon cancer were chosen to monitor traffic of Twitter messages. The activity of leaders on the issue (i.e., news companies or people will prior Twitter activity on topics related to colon cancer) was monitored. In addition, the activity of followers , people who never discussed the topics before, but replied to the discussions was also monitored. Topics that produce tangible benefits such as positive outcomes from appropriate preventive actions received dramatically more attention and online social media traffic. Such characteristics can be explained with social cognitive theory and thus present opportunities for effective health campaigns.

  16. A Multiobjective Optimization Framework for Online Stochastic Optimal Control in Hybrid Electric Vehicles

    SciTech Connect (OSTI)

    Malikopoulos, Andreas

    2015-01-01

    The increasing urgency to extract additional efficiency from hybrid propulsion systems has led to the development of advanced power management control algorithms. In this paper we address the problem of online optimization of the supervisory power management control in parallel hybrid electric vehicles (HEVs). We model HEV operation as a controlled Markov chain and we show that the control policy yielding the Pareto optimal solution minimizes online the long-run expected average cost per unit time criterion. The effectiveness of the proposed solution is validated through simulation and compared to the solution derived with dynamic programming using the average cost criterion. Both solutions achieved the same cumulative fuel consumption demonstrating that the online Pareto control policy is an optimal control policy.

  17. A Multiobjective Optimization Framework for Online Stochastic Optimal Control in Hybrid Electric Vehicles

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Malikopoulos, Andreas

    2015-01-01

    The increasing urgency to extract additional efficiency from hybrid propulsion systems has led to the development of advanced power management control algorithms. In this paper we address the problem of online optimization of the supervisory power management control in parallel hybrid electric vehicles (HEVs). We model HEV operation as a controlled Markov chain and we show that the control policy yielding the Pareto optimal solution minimizes online the long-run expected average cost per unit time criterion. The effectiveness of the proposed solution is validated through simulation and compared to the solution derived with dynamic programming using the average cost criterion.more » Both solutions achieved the same cumulative fuel consumption demonstrating that the online Pareto control policy is an optimal control policy.« less

  18. TVA - Mid-Sized Renewable Standard Offer Program | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    0.036kWh Summary The Tennessee Valley Authority (TVA) now compliments the small generation Green Power Providers Program by providing incentives for mid-sized renewable energy...

  19. 1999 Commercial Building Characteristics--Detailed Tables--Size...

    U.S. Energy Information Administration (EIA) Indexed Site

    Complete Set of 1999 CBECS Detailed Tables Detailed Tables- of Buildings Table B6. Building Size, Number of Buildings b6.pdf (PDF file), b6.xls (Excel spreadsheet file), b6.txt...

  20. Knowledge-based sizing of cogeneration plant in buildings

    SciTech Connect (OSTI)

    Williams, J.M.; Griffiths, A.J.; Knight, I.P.

    1998-10-01

    Cogeneration is now accepted as a cost-effective and environmentally friendly means of meeting some of a building`s heating and power needs. Cogeneration plants have been installed in many buildings throughout the United Kingdom. Because of commercial pressures, building owners and cogeneration companies are keen to reduce the time and money involved in sizing units, and a decision support tool has been developed to aid the engineer in selecting the unit size. An initial assessment of the sizing can be made with only knowledge of the building`s type, size, and location, which enables the model to be used in new build situations. For an existing building, the accuracy of the predictions can then be progressively improved by providing more information about the building`s energy use, enabling the optimum unit to be identified. This paper briefly describes the model and demonstrates its use through an example feasibility study.

  1. TVA - Mid-Sized Renewable Standard Offer Program | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    generation Green Power Providers Program by providing incentives for mid-sized renewable energy generators between 50kW and 20MW to enter into long term price contracts. The goal...

  2. Quantum-size-controlled photoelectrochemical etching of semiconductor...

    Office of Scientific and Technical Information (OSTI)

    For example, quantum dots (QDs) can be QSC-PEC-etched from epitaxial InGaN thin films using narrowband laser photoexcitation, and the QD sizes (and hence bandgaps and ...

  3. Model catalysis by size-selected cluster deposition

    SciTech Connect (OSTI)

    Anderson, Scott

    2015-11-20

    This report summarizes the accomplishments during the last four years of the subject grant. Results are presented for experiments in which size-selected model catalysts were studied under surface science and aqueous electrochemical conditions. Strong effects of cluster size were found, and by correlating the size effects with size-dependent physical properties of the samples measured by surface science methods, it was possible to deduce mechanistic insights, such as the factors that control the rate-limiting step in the reactions. Results are presented for CO oxidation, CO binding energetics and geometries, and electronic effects under surface science conditions, and for the electrochemical oxygen reduction reaction, ethanol oxidation reaction, and for oxidation of carbon by water.

  4. Particle size and shape distributions of hammer milled pine

    SciTech Connect (OSTI)

    Westover, Tyler Lott; Matthews, Austin Colter; Williams, Christopher Luke; Ryan, John Chadron Benjamin

    2015-04-01

    Particle size and shape distributions impact particle heating rates and diffusion of volatized gases out of particles during fast pyrolysis conversion, and consequently must be modeled accurately in order for computational pyrolysis models to produce reliable results for bulk solid materials. For this milestone, lodge pole pine chips were ground using a Thomas-Wiley #4 mill using two screen sizes in order to produce two representative materials that are suitable for fast pyrolysis. For the first material, a 6 mm screen was employed in the mill and for the second material, a 3 mm screen was employed in the mill. Both materials were subjected to RoTap sieve analysis, and the distributions of the particle sizes and shapes were determined using digital image analysis. The results of the physical analysis will be fed into computational pyrolysis simulations to create models of materials with realistic particle size and shape distributions. This milestone was met on schedule.

  5. TVA- Mid-Sized Renewable Standard Offer Program

    Broader source: Energy.gov [DOE]

    The Tennessee Valley Authority (TVA) now compliments the small generation Green Power Providers Program by providing incentives for mid-sized renewable energy generators between 50kW and 20MW to...

  6. Photoluminescent 1-2 nm sized silicon nanoparticles: A surface...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Photoluminescent 1-2 nm sized silicon nanoparticles: A surface-dependent system Authors: Romero, J.J., Llansola-Portols, M.J., Dell'Arciprete, M.L., Rodrguez, H.B., Moore,...

  7. A stochastic method for stand-alone photovoltaic system sizing

    SciTech Connect (OSTI)

    Cabral, Claudia Valeria Tavora; Filho, Delly Oliveira; Martins, Jose Helvecio; Toledo, Olga Moraes

    2010-09-15

    Photovoltaic systems utilize solar energy to generate electrical energy to meet load demands. Optimal sizing of these systems includes the characterization of solar radiation. Solar radiation at the Earth's surface has random characteristics and has been the focus of various academic studies. The objective of this study was to stochastically analyze parameters involved in the sizing of photovoltaic generators and develop a methodology for sizing of stand-alone photovoltaic systems. Energy storage for isolated systems and solar radiation were analyzed stochastically due to their random behavior. For the development of the methodology proposed stochastic analysis were studied including the Markov chain and beta probability density function. The obtained results were compared with those for sizing of stand-alone using from the Sandia method (deterministic), in which the stochastic model presented more reliable values. Both models present advantages and disadvantages; however, the stochastic one is more complex and provides more reliable and realistic results. (author)

  8. AVTA: Full-Size Electric Vehicle Specifications and Test Procedures |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Full-Size Electric Vehicle Specifications and Test Procedures AVTA: Full-Size Electric Vehicle Specifications and Test Procedures PDF icon EV America Test Specifications PDF icon ETA-TP001 Implementation of SAE Standard J1263, February 1996 - Road Load Measurement and Dynamometer Simulation Using Coastdown Techniques PDF icon ETA-TP002 Implementation of SAE Standard J1666, May 1993 - Electric Vehicle Acceleration, Gradeability, and Deceleration Test Procedure PDF icon

  9. Overview of Detailed Chemical Speciation and Particle Sizing for Diesel

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Exhaust, Both Real Time and Filter Based Measurements | Department of Energy Detailed Chemical Speciation and Particle Sizing for Diesel Exhaust, Both Real Time and Filter Based Measurements Overview of Detailed Chemical Speciation and Particle Sizing for Diesel Exhaust, Both Real Time and Filter Based Measurements 2002 DEER Conference Presentation: University of Wisconsin - Madison PDF icon 2002_deer_foster.pdf More Documents & Publications The Impact of Oil Consumption Mechanisms on

  10. Global Nuclear Energy Partnership Triples in Size to 16 Members |

    Energy Savers [EERE]

    Department of Energy Triples in Size to 16 Members Global Nuclear Energy Partnership Triples in Size to 16 Members September 16, 2007 - 2:33pm Addthis Nations Sign On to International Cooperation for Safe Expansion of Nuclear Energy Worldwide VIENNA, AUSTRIA - U.S. Secretary of Energy Samuel W. Bodman and senior international officials from 16 nations today agreed to increase international nuclear energy cooperation through the Global Nuclear Energy Partnership (GNEP). China, France, Japan,

  11. Enhanced Nanoparticle Size Control by Extending LaMer's Mechanism

    Office of Scientific and Technical Information (OSTI)

    (Journal Article) | SciTech Connect Enhanced Nanoparticle Size Control by Extending LaMer's Mechanism Citation Details In-Document Search Title: Enhanced Nanoparticle Size Control by Extending LaMer's Mechanism Authors: Vreeland, Erika C. ; Watt, John ; Schober, Gretchen B. ; Hance, Bradley G. ; Austin, Mariah J. ; Price, Andrew D. ; Fellows, Benjamin D. ; Monson, Todd C. ; Hudak, Nicholas S. ; Maldonado-Camargo, Lorena ; Bohorquez, Ana C. ; Rinaldi, Carlos ; Huber, Dale L. Publication Date:

  12. Evolution of droplet size distribution and autoconversion parameterization

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    in turbulent clouds Evolution of droplet size distribution and autoconversion parameterization in turbulent clouds McGraw, Robert Brookhaven National Laboratory Liu, Yangang Brookhaven National Laboratory Category: Modeling Effects from turbulence-induced fluctuations in water vapor saturation on cloud droplet growth are examined using a Brownian diffusion model [McGraw and Liu, 2006]. The model predicts diffusive broadening of the droplet size distribution, tempered by enhanced

  13. Versatile Diesel Particulate Filter Cartridge Any Size, Any Shape |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Versatile Diesel Particulate Filter Cartridge Any Size, Any Shape Versatile Diesel Particulate Filter Cartridge Any Size, Any Shape Presentation given at DEER 2006, August 20-24, 2006, Detroit, Michigan. Sponsored by the U.S. DOE's EERE FreedomCar and Fuel Partnership and 21st Century Truck Programs. PDF icon 2006_deer_nixdorf.pdf More Documents & Publications Pleated Ceramic Fiber Diesel Particulate Filter Ultra-Lite Diesel Particulate Filter Cartridge for Reduced

  14. Scalable Heuristics for Planning, Placement and Sizing of Flexible AC

    Office of Scientific and Technical Information (OSTI)

    Transmission System Devices (Technical Report) | SciTech Connect Technical Report: Scalable Heuristics for Planning, Placement and Sizing of Flexible AC Transmission System Devices Citation Details In-Document Search Title: Scalable Heuristics for Planning, Placement and Sizing of Flexible AC Transmission System Devices Aiming to relieve transmission grid congestion and improve or extend feasibility domain of the operations, we build optimization heuristics, generalizing standard AC Optimal

  15. Size Effects in the Electrochemical Alloying and Cycling of

    Office of Scientific and Technical Information (OSTI)

    Electrodeposited Aluminum with Lithium. (Journal Article) | SciTech Connect Size Effects in the Electrochemical Alloying and Cycling of Electrodeposited Aluminum with Lithium. Citation Details In-Document Search Title: Size Effects in the Electrochemical Alloying and Cycling of Electrodeposited Aluminum with Lithium. Abstract not provided. Authors: Hudak, Nicholas ; Huber, Dale L. Publication Date: 2011-10-01 OSTI Identifier: 1106948 Report Number(s): SAND2011-7589J 464917 DOE Contract

  16. Microsoft PowerPoint - ARM2007LetterSize.ppt

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Remote sensing microphysical retrieval and cloud microphysics parameterizations rely on a knowledge of the shape of cloud drop size distributions (DSD). These are often approximated by Gamma, lognormal, or, more specifically by Khrgian-Mazin, Marshall-Palmer type distributions. We ask the question which functional form approximates best the drop size distributions in drizzling stratocumulus? Specifically, we evaluate the accuracy of lognormal and Gamma-type distributions in approximating higher

  17. Note: On-line weak signal detection via adaptive stochastic resonance

    SciTech Connect (OSTI)

    Lu, Siliang; He, Qingbo Kong, Fanrang

    2014-06-15

    We design an instrument with a novel embedded adaptive stochastic resonance (SR) algorithm that consists of a SR module and a digital zero crossing detection module for on-line weak signal detection in digital signal processing applications. The two modules are responsible for noise filtering and adaptive parameter configuration, respectively. The on-line weak signal detection can be stably achieved in seconds. The prototype instrument exhibits an advance of 20 dB averaged signal-to-noise ratio and 5 times averaged adjust R-square as compared to the input noisy signal, in considering different driving frequencies and noise levels.

  18. IDENTIFYING ON-LINE GROUPS BASED ON CONTENT AND COLLECTIVE BEHAVIORAL PATTERNS

    SciTech Connect (OSTI)

    Engel, David W.; Gregory, Michelle L.; Bell, Eric B.; McGrath, Liam R.

    2012-05-01

    Online communities, or groups, have largely been defined based on links, page rank, and eigenvalues. In this paper we explore identifying abstract groups, groups where member's interests and online footprints are similar but they are not necessarily connected to one another explicitly. We use a combination of structural information and content information from posts and their comments to build a footprint for groups. We find that these variables do a good job at identifying groups, placing members within a group, and help determine the appropriate granularity for group boundaries.

  19. QER Update and New Reports On-Line | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    QER Update and New Reports On-Line QER Update and New Reports On-Line February 6, 2015 - 11:17am Addthis Melanie A. Kenderdine Melanie A. Kenderdine Director of the Office of Energy Policy and Systems Analysis We will soon release the first installment of the Quadrennial Energy Review (QER). The QER is an Administration-wide plan of action focused on modernizing and transforming US energy transmission, storage, and distribution (TS&D) infrastructures to enhance our competitiveness and energy

  20. DOE Launches New Online Search Tool for Patents, 1940s to Present |

    Energy Savers [EERE]

    Department of Energy Online Search Tool for Patents, 1940s to Present DOE Launches New Online Search Tool for Patents, 1940s to Present September 18, 2007 - 2:41pm Addthis Database Showcases Robust DOE R&D Investments WASHINGTON, DC - The U.S. Department of Energy (DOE) today announced the launch of a website, DOepatents, which allows search and retrieval of information from a collection of more than 20,000 patent records. The database represents a growing collection of patents resulting

  1. Continuous On-Line Partial Discharge Monitor for Medium-Voltage Cable Feasibility Study

    SciTech Connect (OSTI)

    M. Fenger

    2005-11-30

    Partial discharge (PD) assessment is one method of detecting cable conditions that predict approaching failure. While not all PDs in cable systems lead to failure, PDs within the cable's insulation can lead to relatively rapid failure. Accordingly, on-line PD assessment may be more useful than periodic PD assessment because the period of partial discharging at the end of a cable's life may be quite short. The research described in this report studied the feasibility of developing an on-line PD monitor for assessing both shielded and unshielded MV cables.

  2. Online Planning Tools Make Road Trips a Snap | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Online Planning Tools Make Road Trips a Snap Online Planning Tools Make Road Trips a Snap May 18, 2015 - 11:42pm Addthis Use planning tools from FuelEconomy.gov to save fuel and money on your summer road trips. | Photo courtesy of Pat Corkery/NREL. Use planning tools from FuelEconomy.gov to save fuel and money on your summer road trips. | Photo courtesy of Pat Corkery/NREL. Shannon Brescher Shea Communications Manager, Clean Cities Program What does this mean for me? Spend less money to fuel

  3. Decreasing transmembrane segment length greatly decreases perfringolysin O pore size

    SciTech Connect (OSTI)

    Lin, Qingqing; Li, Huilin; Wang, Tong; London, Erwin

    2015-04-08

    Perfringolysin O (PFO) is a transmembrane (TM) β-barrel protein that inserts into mammalian cell membranes. Once inserted into membranes, PFO assembles into pore-forming oligomers containing 30–50 PFO monomers. These form a pore of up to 300 Å, far exceeding the size of most other proteinaceous pores. In this study, we found that altering PFO TM segment length can alter the size of PFO pores. A PFO mutant with lengthened TM segments oligomerized to a similar extent as wild-type PFO, and exhibited pore-forming activity and a pore size very similar to wild-type PFO as measured by electron microscopy and a leakage assay. In contrast, PFO with shortened TM segments exhibited a large reduction in pore-forming activity and pore size. This suggests that the interaction between TM segments can greatly affect the size of pores formed by TM β-barrel proteins. PFO may be a promising candidate for engineering pore size for various applications.

  4. Decreasing transmembrane segment length greatly decreases perfringolysin O pore size

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Lin, Qingqing; Li, Huilin; Wang, Tong; London, Erwin

    2015-04-08

    Perfringolysin O (PFO) is a transmembrane (TM) β-barrel protein that inserts into mammalian cell membranes. Once inserted into membranes, PFO assembles into pore-forming oligomers containing 30–50 PFO monomers. These form a pore of up to 300 Å, far exceeding the size of most other proteinaceous pores. In this study, we found that altering PFO TM segment length can alter the size of PFO pores. A PFO mutant with lengthened TM segments oligomerized to a similar extent as wild-type PFO, and exhibited pore-forming activity and a pore size very similar to wild-type PFO as measured by electron microscopy and a leakagemore » assay. In contrast, PFO with shortened TM segments exhibited a large reduction in pore-forming activity and pore size. This suggests that the interaction between TM segments can greatly affect the size of pores formed by TM β-barrel proteins. PFO may be a promising candidate for engineering pore size for various applications.« less

  5. Residential Variable-Capacity Heat Pumps Sized to Heating Loads

    SciTech Connect (OSTI)

    Munk, Jeffrey D.; Jackson, Roderick K.; Odukomaiya, Adewale; Gehl, Anthony C.

    2014-01-01

    Variable capacity heat pumps are an emerging technology offering significant energy savings potential and improved efficiency. With conventional single-speed systems, it is important to appropriately size heat pumps for the cooling load as over-sizing would result in cycling and insufficient latent capacity required for humidity control. These appropriately sized systems are often under-sized for the heating load and require inefficient supplemental electric resistance heat to meet the heating demand. Variable capacity heat pumps address these shortcomings by providing an opportunity to intentionally size systems for the dominant heating season load without adverse effects of cycling or insufficient dehumidification in the cooling season. This intentionally-sized system could result in significant energy savings in the heating season, as the need for inefficient supplemental electric resistance heat is drastically reduced. This is a continuation of a study evaluating the energy consumption of variable capacity heat pumps installed in two unoccupied research homes in Farragut, a suburb of Knoxville, Tennessee. In this particular study, space conditioning systems are intentionally sized for the heating season loads to provide an opportunity to understand and evaluate the impact this would have on electric resistance heat use and dehumidification. The results and conclusions drawn through this research are valid and specific for portions of the Southeastern and Midwestern United States falling in the mixed-humid climate zone. While other regions in the U.S. do not experience this type of climate, this work provides a basis for, and can help understand the implications of other climate zones on residential space conditioning energy consumption. The data presented here will provide a framework for fine tuning residential building EnergyPlus models that are being developed.

  6. Size exclusion deep bed filtration: Experimental and modelling uncertainties

    SciTech Connect (OSTI)

    Badalyan, Alexander You, Zhenjiang; Aji, Kaiser; Bedrikovetsky, Pavel; Carageorgos, Themis; Zeinijahromi, Abbas

    2014-01-15

    A detailed uncertainty analysis associated with carboxyl-modified latex particle capture in glass bead-formed porous media enabled verification of the two theoretical stochastic models for prediction of particle retention due to size exclusion. At the beginning of this analysis it is established that size exclusion is a dominant particle capture mechanism in the present study: calculated significant repulsive Derjaguin-Landau-Verwey-Overbeek potential between latex particles and glass beads is an indication of their mutual repulsion, thus, fulfilling the necessary condition for size exclusion. Applying linear uncertainty propagation method in the form of truncated Taylor's series expansion, combined standard uncertainties (CSUs) in normalised suspended particle concentrations are calculated using CSUs in experimentally determined parameters such as: an inlet volumetric flowrate of suspension, particle number in suspensions, particle concentrations in inlet and outlet streams, particle and pore throat size distributions. Weathering of glass beads in high alkaline solutions does not appreciably change particle size distribution, and, therefore, is not considered as an additional contributor to the weighted mean particle radius and corresponded weighted mean standard deviation. Weighted mean particle radius and LogNormal mean pore throat radius are characterised by the highest CSUs among all experimental parameters translating to high CSU in the jamming ratio factor (dimensionless particle size). Normalised suspended particle concentrations calculated via two theoretical models are characterised by higher CSUs than those for experimental data. The model accounting the fraction of inaccessible flow as a function of latex particle radius excellently predicts normalised suspended particle concentrations for the whole range of jamming ratios. The presented uncertainty analysis can be also used for comparison of intra- and inter-laboratory particle size exclusion data.

  7. Solar Radiation Data from the World Radiation Data Centre (WRDC) Online Archive

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    At present, this online archive contains a subset of the data stored at the WRDC. As new measurements are received and processed, they are added to the archive. The archive currently contains all available data from 1964-1993.[From ôBackground on the WRDCö at http://wrdc-mgo.nrel.gov/html/about.html

  8. Online Condition Monitoring to Enable Extended Operation of Nuclear Power Plants

    SciTech Connect (OSTI)

    Meyer, Ryan M.; Bond, Leonard J.; Ramuhalli, Pradeep

    2012-03-31

    Safe, secure, and economic operation of nuclear power plants will remain of strategic significance. New and improved monitoring will likely have increased significance in the post-Fukushima world. Prior to Fukushima, many activities were already underway globally to facilitate operation of nuclear power plants beyond their initial licensing periods. Decisions to shut down a nuclear power plant are mostly driven by economic considerations. Online condition monitoring is a means to improve both the safety and economics of extending the operating lifetimes of nuclear power plants, enabling adoption of proactive aging management. With regard to active components (e.g., pumps, valves, motors, etc.), significant experience in other industries has been leveraged to build the science base to support adoption for online condition-based maintenance and proactive aging management in the nuclear industry. Many of the research needs are associated with enabling proactive management of aging in passive components (e.g., pipes, vessels, cables, containment structures, etc.). This paper provides an overview of online condition monitoring for the nuclear power industry with an emphasis on passive components. Following the overview, several technology/knowledge gaps are identified, which require addressing to facilitate widespread online condition monitoring of passive components.

  9. Solar Radiation Data from the World Radiation Data Centre (WRDC) Online Archive

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    At present, this online archive contains a subset of the data stored at the WRDC. As new measurements are received and processed, they are added to the archive. The archive currently contains all available data from 1964-1993.[From Background on the WRDC at http://wrdc-mgo.nrel.gov/html/about.html

  10. X-Ray Data from the X-Ray Data Booklet Online

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Thompson, Albert C.; Attwood, David T.; Gullikson, Eric M.; Howells, Malcolm R.; Kortright, Jeffrey B.; Robinson, Arthur L.; Underwood, James H.; Kim, Kwang-Je; Kirz, Janos; Lindau, Ingolf; Pianetta, Piero; Winick, Herman; Williams, Gwyn P.; Scofield, James H.

    The original X-Ray Data Booklet, published in 1985, became a classic reference source. The online version has been significantly revised and updated to reflect today's science. Hundreds of pages of authoritative data provide the x-ray properties of elements, information on synchrotron radiation, scattering processes, optics and detectors, and other related calculations, formulas, and data tables.

  11. A method for online verification of adapted fields using an independent dose monitor

    SciTech Connect (OSTI)

    Chang Jina; Norrlinger, Bernhard D.; Heaton, Robert K.; Jaffray, David A.; Cho, Young-Bin; Islam, Mohammad K.; Mahon, Robert

    2013-07-15

    Purpose: Clinical implementation of online adaptive radiotherapy requires generation of modified fields and a method of dosimetric verification in a short time. We present a method of treatment field modification to account for patient setup error, and an online method of verification using an independent monitoring system.Methods: The fields are modified by translating each multileaf collimator (MLC) defined aperture in the direction of the patient setup error, and magnifying to account for distance variation to the marked isocentre. A modified version of a previously reported online beam monitoring system, the integral quality monitoring (IQM) system, was investigated for validation of adapted fields. The system consists of a large area ion-chamber with a spatial gradient in electrode separation to provide a spatially sensitive signal for each beam segment, mounted below the MLC, and a calculation algorithm to predict the signal. IMRT plans of ten prostate patients have been modified in response to six randomly chosen setup errors in three orthogonal directions.Results: A total of approximately 49 beams for the modified fields were verified by the IQM system, of which 97% of measured IQM signal agree with the predicted value to within 2%.Conclusions: The modified IQM system was found to be suitable for online verification of adapted treatment fields.

  12. DOE to Unveil New Online Database of Oil and Natural Gas Research Results

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy plans to introduce a new, user-friendly online repository of oil and natural gas research results at the Society of Petroleum Engineers' Annual Technical Conference and Exhibition, to be held in New Orleans, La., October 4-7, 2009.

  13. Effect of particle size reduction on anaerobic sludge digestion

    SciTech Connect (OSTI)

    Koutsospyros, A.D.

    1990-01-01

    The majority of organic pollutants in primary sludge are suspended in the form of particulate rather than soluble matter. Microbial organisms cannot assimilate this material without initial solubilization. In anaerobic digestion, the initial size breakdown is accomplished by hydrolytic bacteria. The extent of solubilization is limited by the size of particulate matter. Thus, size reduction prior to digestion is a sound alternative. Size reduction pretreatment was achieved by means of ultrasonic waves. Sonication proved an effective method for size reduction of particulate matter in primary sludge. In addition, although the method produced relatively high amounts of finely dispered solids, the filtration properties of resulting sludges were not affected. Chemical characteristics of sludge, important in anaerobic digestion, were not affected, at least within the attempted range of sonication time and amplitude. The effect of size reduction of primary sludge solids was studied under batch and semi-continuous feed conditions. Preliminary batch digestion experiments were conducted in five 1.5 liter reactors that accepted sonicated feeds of varying pretreatment at four different feed loads (3.3-13.3% by volume). The digestion efficiency and gas production were increased by as much as 30 percent as a result of sonication without any deterioration in the filtration properties of the digester effluent. At higher feed loads the digester efficiency dropped drastically and significant deterioration of the effluent filtration properties from all reactors was evident. Semi-continuous runs were conducted in four reactors. Solids retention time (SRT) was varied from 8 to 20 days. Process efficiency and gas production were enhanced as a result of sonication. Process improvement was more evident under short SRT (8-10 days).

  14. Level: National Data; Row: Employment Sizes within NAICS Codes;

    Gasoline and Diesel Fuel Update (EIA)

    4 Consumption Ratios of Fuel, 2006; Level: National Data; Row: Employment Sizes within NAICS Codes; Column: Energy-Consumption Ratios; Unit: Varies. Consumption Consumption per Dollar Consumption per Dollar of Value NAICS per Employee of Value Added of Shipments Code(a) Economic Characteristic(b) (million Btu) (thousand Btu) (thousand Btu) Total United States 311 - 339 ALL MANUFACTURING INDUSTRIES Employment Size Under 50 562.6 4.7 2.4 50-99 673.1 5.1 2.4 100-249 1,072.8 6.5 3.0 250-499 1,564.3

  15. Level: National Data; Row: Employment Sizes within NAICS Codes;

    Gasoline and Diesel Fuel Update (EIA)

    4 Consumption Ratios of Fuel, 2010; Level: National Data; Row: Employment Sizes within NAICS Codes; Column: Energy-Consumption Ratios; Unit: Varies. Consumption Consumption per Dollar Consumption per Dollar of Value NAICS per Employee of Value Added of Shipments Code(a) Economic Characteristic(b) (million Btu) (thousand Btu) (thousand Btu) Total United States 311 - 339 ALL MANUFACTURING INDUSTRIES Employment Size Under 50 625.5 3.3 1.7 50-99 882.3 5.8 2.5 100-249 1,114.9 5.8 2.5 250-499 2,250.4

  16. Concentrations and Size Distributions of Particulate Matter Emissions from

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Catalyzed Trap-Equipped Heavy-duty Diesel Vehicles Operating on Ultra-low Sulfur EC-D Fuel | Department of Energy Concentrations and Size Distributions of Particulate Matter Emissions from Catalyzed Trap-Equipped Heavy-duty Diesel Vehicles Operating on Ultra-low Sulfur EC-D Fuel Concentrations and Size Distributions of Particulate Matter Emissions from Catalyzed Trap-Equipped Heavy-duty Diesel Vehicles Operating on Ultra-low Sulfur EC-D Fuel 2002 DEER Conference Presentation: West Virginia

  17. Metal oxide porous ceramic membranes with small pore sizes

    DOE Patents [OSTI]

    Anderson, Marc A. (Madison, WI); Xu, Qunyin (Madison, WI)

    1992-01-01

    A method is disclosed for the production of metal oxide ceramic membranes of very small pore size. The process is particularly useful in the creation of titanium and other transition metal oxide membranes. The method utilizes a sol-gel process in which the rate of particle formation is controlled by substituting a relatively large alcohol in the metal alkoxide and by limiting the available water. Stable, transparent metal oxide ceramic membranes are created having a narrow distribution of pore size, with the pore diameter being manipulable in the range of 5 to 40 Angstroms.

  18. Metal oxide porous ceramic membranes with small pore sizes

    DOE Patents [OSTI]

    Anderson, Marc A. (Madison, WI); Xu, Qunyin (Madison, WI)

    1991-01-01

    A method is disclosed for the production of metal oxide ceramic membranes of very small pore size. The process is particularly useful in the creation of titanium and other transition metal oxide membranes. The method utilizes a sol-gel process in which the rate of particle formation is controlled by substituting a relatively large alcohol in the metal alkoxide and by limiting the available water. Stable, transparent metal oxide ceramic membranes are created having a narrow distribution of pore size, with the pore diameter being manipulable in the range of 5 to 40 Angstroms.

  19. Method of controlling crystallite size in nuclear-reactor fuels

    DOE Patents [OSTI]

    Lloyd, Milton H. (Oak Ridge, TN); Collins, Jack L. (Knoxville, TN); Shell, Sam E. (Oak Ridge, TN)

    1985-01-01

    Improved spherules for making enhanced forms of nuclear-reactor fuels are prepared by internal gelation procedures within a sol-gel operation and are accomplished by first boiling the concentrated HMTA-urea feed solution before engaging in the spherule-forming operation thereby effectively controlling crystallite size in the product spherules.

  20. THE STICKINESS OF MICROMETER-SIZED WATER-ICE PARTICLES

    SciTech Connect (OSTI)

    Gundlach, B.; Blum, J.

    2015-01-01

    Water ice is one of the most abundant materials in dense molecular clouds and in the outer reaches of protoplanetary disks. In contrast to other materials (e.g., silicates), water ice is assumed to be stickier due to its higher specific surface energy, leading to faster or more efficient growth in mutual collisions. However, experiments investigating the stickiness of water ice have been scarce, particularly in the astrophysically relevant micrometer-sized region and at low temperatures. In this work, we present an experimental setup to grow aggregates composed of ?m-sized water-ice particles, which we used to measure the sticking and erosion thresholds of the ice particles at different temperatures between 114 K and 260 K. We show with our experiments that for low temperatures (below ?210 K), ?m-sized water-ice particles stick below a threshold velocity of 9.6 m s{sup 1}, which is approximately 10times higher than the sticking threshold of ?m-sized silica particles. Furthermore, erosion of the grown ice aggregates is observed for velocities above 15.3 m s{sup 1}. A comparison of the experimentally derived sticking threshold with model predictions is performed to determine important material properties of water ice, i.e., the specific surface energy and the viscous relaxation time. Our experimental results indicate that the presence of water ice in the outer reaches of protoplanetary disks can enhance the growth of planetesimals by direct sticking of particles.

  1. Screen bowl centrifuge: a high-efficiency particle size separator

    SciTech Connect (OSTI)

    Mohanty, M.K.; Zhang, B.; Khanna, N.; Palit, A.; Dube, B.

    2008-05-15

    Over the years, screen bowl centrifuges have been widely used for dewatering fine coal in coal preparation plants in the United States and elsewhere. It is generally recognized in the engineering and scientific communities that screen bowl centrifuges provide some degree of particle size separation while dewatering fine coal in a common application. However, the extent of differential partitioning of coarse and fine particles achievable by a screen bowl centrifuge has not been systematically studied in the past. The present investigation was aimed at conducting a parametric study using a statistically designed experimental program to better understand and optimize the size classification performance of a screen bowl centrifuge. A continuously operating screen bowl centrifuge having a bowl diameter of 0.5 m was used for this study at the Illinois Coal Development Park. Three key operating parameters, i.e., feed flow rate, feed solid content and pool depth, were varied to conduct a total of 17 experiments using a three-level factorial test matrix. Some of the best size separation performances achieved in this study may be described as having an imperfection value of 0.13 at an effective separation size (d(50c)) of 38 mu m and an imperfection value of 0.27 at an effective separation size (d(50c)) of 2.8 mu m. Due to an effective separation of ultrafine high ash materials, the ash content of the screen bowl feed was reduced from 22.3% to a minimum of 8.84% with a combustible recovery of 84.1% and an ash rejection of 71.6%. A higher combustible recovery of 92.1% was achieved at a product ash content of 12.5% with a d(50c) of 2.8 mu m and imperfection of 0.27.

  2. Magnetic agglomeration method for size control in the synthesis of magnetic nanoparticles

    DOE Patents [OSTI]

    Huber, Dale L. (Albuquerque, NM)

    2011-07-05

    A method for controlling the size of chemically synthesized magnetic nanoparticles that employs magnetic interaction between particles to control particle size and does not rely on conventional kinetic control of the reaction to control particle size. The particles are caused to reversibly agglomerate and precipitate from solution; the size at which this occurs can be well controlled to provide a very narrow particle size distribution. The size of particles is controllable by the size of the surfactant employed in the process; controlling the size of the surfactant allows magnetic control of the agglomeration and precipitation processes. Agglomeration is used to effectively stop particle growth to provide a very narrow range of particle sizes.

  3. On-Line Physical Property Process Measurements for Nuclear Fuel Recycling

    SciTech Connect (OSTI)

    Pappas, Richard A.; Bond, Leonard J.; Greenwood, Margaret S.; Hostick, Cody J.

    2007-07-01

    The Global Nuclear Energy Partnership (GNEP) is looking to close the nuclear fuel cycle and demonstrate key fuel recycling technologies, while at the same time reducing proliferation risks. A key element of GNEP is the demonstration of the uranium extraction (UREX) +1a process, and potentially other fuel reprocessing schemes. Advanced recycling of nuclear fuel will require improved on-line monitoring and process control. Advanced ultrasonic sensor technology can be a critical component of a process quality control strategy that is designed to determine the sources of variability and minimize their impact on the quality of the end product. PNNL ultrasonic devices and methodologies, many of which were initially developed and deployed to address the needs of the DOE Hanford site, provide on-line physical property measurement useful in optimizing plant capacity, assuring cost-effective analyses, and satisfying direct sampling requirements.. A select collection of PNNL ultrasonic technology is discussed in this context. (authors)

  4. An improved, computer-based, on-line gamma monitor for plutonium anion exchange process control

    SciTech Connect (OSTI)

    Pope, N.G.; Marsh, S.F.

    1987-06-01

    An improved, low-cost, computer-based system has replaced a previously developed on-line gamma monitor. Both instruments continuously profile uranium, plutonium, and americium in the nitrate anion exchange process used to recover and purify plutonium at the Los Alamos Plutonium Facility. The latest system incorporates a personal computer that provides full-feature multichannel analyzer (MCA) capabilities by means of a single-slot, plug-in integrated circuit board. In addition to controlling all MCA functions, the computer program continuously corrects for gain shift and performs all other data processing functions. This Plutonium Recovery Operations Gamma Ray Energy Spectrometer System (PROGRESS) provides on-line process operational data essential for efficient operation. By identifying abnormal conditions in real time, it allows operators to take corrective actions promptly. The decision-making capability of the computer will be of increasing value as we implement automated process-control functions in the future. 4 refs., 6 figs.

  5. DNA fragment sizing and sorting by laser-induced fluorescence

    DOE Patents [OSTI]

    Hammond, Mark L.; Jett, James H.; Keller, Richard A.; Marrone, Babetta L.; Martin, John C.

    1996-01-01

    A method is provided for sizing DNA fragments using high speed detection systems, such as flow cytometry to determine unique characteristics of DNA pieces from a sample. In one characterization the DNA piece is fragmented at preselected sites to produce a plurality of DNA fragments. The DNA piece or the resulting DNA fragments are treated with a dye effective to stain stoichiometrically the DNA piece or the DNA fragments. The fluorescence from the dye in the stained fragments is then examined to generate an output functionally related to the number of nucleotides in each one of the DNA fragments. In one embodiment, the intensity of the fluorescence emissions from each fragment is linearly related to the fragment length. The distribution of DNA fragment sizes forms a characterization of the DNA piece for use in forensic and research applications.

  6. Method and apparatus for physical separation of different sized nanostructures

    DOE Patents [OSTI]

    Roberts, Christopher B.; Saunders, Steven R.

    2012-07-10

    The present application provides apparatuses and methods for the size-selective fractionation of ligand-capped nanoparticles that utilizes the tunable thermophysical properties of gas-expanded liquids. The nanoparticle size separation processes are based on the controlled reduction of the solvent strength of an organic phase nanoparticle dispersion through increases in concentration of the antisolvent gas, such as CO.sub.2, via pressurization. The method of nanomaterial separation contains preparing a vessel having a solvent and dispersed nanoparticles, pressurizing the chamber with a gaseous antisolvent, and causing a first amount of the nanoparticles to precipitate, transporting the solution to a second vessel, pressurizing the second vessel with the gaseous antisolvent and causing further nanoparticles to separate from the solution.

  7. Method for measuring the size distribution of airborne rhinovirus

    SciTech Connect (OSTI)

    Russell, M.L.; Goth-Goldstein, R.; Apte, M.G.; Fisk, W.J.

    2002-01-01

    About 50% of viral-induced respiratory illnesses are caused by the human rhinovirus (HRV). Measurements of the concentrations and sizes of bioaerosols are critical for research on building characteristics, aerosol transport, and mitigation measures. We developed a quantitative reverse transcription-coupled polymerase chain reaction (RT-PCR) assay for HRV and verified that this assay detects HRV in nasal lavage samples. A quantitation standard was used to determine a detection limit of 5 fg of HRV RNA with a linear range over 1000-fold. To measure the size distribution of HRV aerosols, volunteers with a head cold spent two hours in a ventilated research chamber. Airborne particles from the chamber were collected using an Andersen Six-Stage Cascade Impactor. Each stage of the impactor was analyzed by quantitative RT-PCR for HRV. For the first two volunteers with confirmed HRV infection, but with mild symptoms, we were unable to detect HRV on any stage of the impactor.

  8. A novel hybrid (wind-photovoltaic) system sizing procedure

    SciTech Connect (OSTI)

    Hocaoglu, Fatih O.; Gerek, Oemer N.; Kurban, Mehmet

    2009-11-15

    Wind-photovoltaic hybrid system (WPHS) utilization is becoming popular due to increasing energy costs and decreasing prices of turbines and photovoltaic (PV) panels. However, prior to construction of a renewable generation station, it is necessary to determine the optimum number of PV panels and wind turbines for minimal cost during continuity of generated energy to meet the desired consumption. In fact, the traditional sizing procedures find optimum number of the PV modules and wind turbines subject to minimum cost. However, the optimum battery capacity is either not taken into account, or it is found by a full search between all probable solution spaces which requires extensive computation. In this study, a novel description of the production/consumption phenomenon is proposed, and a new sizing procedure is developed. Using this procedure, optimum battery capacity, together with optimum number of PV modules and wind turbines subject to minimum cost can be obtained with good accuracy. (author)

  9. Table B6. Building Size, Number of Buildings, 1999

    U.S. Energy Information Administration (EIA) Indexed Site

    B6. Building Size, Number of Buildings, 1999" ,"Number of Buildings (thousand)" ,"All Buildings ","Building Size" ,,"1,001 to 5,000 Square Feet","5,001 to 10,000 Square Feet","10,001 to 25,000 Square Feet","25,001 to 50,000 Square Feet","50,001 to 100,000 Square Feet","100,001 to 200,000 Square Feet","200,001 to 500,000 Square Feet","Over 500,000 Square Feet" "All Buildings

  10. Size and weight graded multi-ply laminar electrodes

    DOE Patents [OSTI]

    Liu, Chia-Tsun (Monroeville, PA); Demczyk, Brian G. (Rostrover Township, Westmoreland County, PA); Rittko, Irvin R. (Murrysville Borough, PA)

    1984-01-01

    An electrode is made comprising a porous backing sheet, and attached thereto a catalytically active layer having an electrolyte permeable side and a backing layer contacting side, where the active layer comprises a homogeneous mixture of active hydrophobic and hydrophilic agglomerates with catalyst disposed equally throughout the active layer, and where the agglomerate size increases from the electrolyte permeable side to the backing sheet contacting side.

  11. Synthesis of micro-sized interconnected Si-C composites

    DOE Patents [OSTI]

    Wang, Donghai; Yi, Ran; Dai, Fang

    2016-02-23

    Embodiments provide a method of producing micro-sized Si--C composites or doped Si--C and Si alloy-C with interconnected nanoscle Si and C building blocks through converting commercially available SiO.sub.x (0

  12. ARM - Publications: Science Team Meeting Documents: Stratocumulus cell size

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and emittance at the ARM TWP Darwin site - implications for observations from CALIPSO Stratocumulus cell size and emittance at the ARM TWP Darwin site - implications for observations from CALIPSO Platt, C. Colorado State University and CSIRO Atmospheric Research Bennett, John CSIRO Atmospheric Research The NASA CALIPSO satellite instrument due to be launched in mid-2005 will carry a two-wavelength polarisation lidar and a scanning filter infrared radiometer viewing in the nadir. Preliminary

  13. Finite-size instabilities in nuclear energy density functionals

    SciTech Connect (OSTI)

    Hellemans, V.; Heenen, P.-H.; Bender, M.

    2012-10-20

    The systematic lack of convergence of self-consistent mean-field calculations with certain parameterizations of the Skyrme energy density functional has been attributed to the appearance of finite-size instabilities. In this contribution, we investigate what happens at the instability associated with the C{sub 0}{sup {Delta}s}s{sub 0} Dot-Operator {Delta}s{sub 0} term in a high-spin state of the superdeformed band in {sup 194}Hg.

  14. Building Component Library: An Online Repository to Facilitate Building Energy Model Creation: Preprint

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Building Component Library: An Online Repository to Facilitate Building Energy Model Creation Preprint Katherine Fleming, Nicholas Long, and Alex Swindler To be presented at the ACEEE Summer Study on Energy Efficiency in Buildings Pacific Grove, California August 12-17, 2012 Conference Paper NREL/CP-5500-54710 May 2012 NOTICE The submitted manuscript has been offered by an employee of the Alliance for Sustainable Energy, LLC (Alliance), a contractor of the US Government under Contract No.

  15. 2016 Benefits Online Open Enrollment Period Starts Today, February 10, 2016

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    | Jefferson Lab Attention All Regular and Term Employees: The 2016 Benefits Online Open Enrollment Period for Jefferson Lab starts today, February 10, 2016, and will be offered through Tuesday, February 23, 2016. This is your opportunity to review and, if necessary, modify your benefits options. Below are a few reminders concerning the Open Enrollment Process, as well as important updates regarding any co-pay changes: Default Enrollment: We will continue offering a Default Benefits

  16. IEA-GIA ExCo - National Geothermal Data System and Online Tools

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    IEA-GIA ExCo National Geothermal Data System & Online Tools Jay Nathwani Enel Salt Wells - Courtesy of Enel Green Power - North America September 30, 2011 Energy Efficiency & Renewable Energy eere.energy.gov Discussed Rather than a full country report, the following selected topics will be discussed briefly. 2 New Program Manager US Installed Capacity National Geothermal Data System DOE Projects Database Demo 2011 R&D Funding Opportunity Awards Existing International Collaborations

  17. On-line, Continuous Monitoring in Solar Cell and Fuel Cell Manufacturing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Using Spectral Reflectance Imaging - Energy Innovation Portal Solar Photovoltaic Solar Photovoltaic Industrial Technologies Industrial Technologies Hydrogen and Fuel Cell Hydrogen and Fuel Cell Find More Like This Return to Search On-line, Continuous Monitoring in Solar Cell and Fuel Cell Manufacturing Using Spectral Reflectance Imaging National Renewable Energy Laboratory Contact NREL About This Technology Prototype Setup Prototype Setup Grain orientation map of a 156-mm x 156-mm mc-Si

  18. Analytical determination of critical crack size in solar cells

    SciTech Connect (OSTI)

    Chen, C.P.

    1988-05-01

    Although solar cells usually have chips and cracks, no material specifications concerning the allowable crack size on solar cells are available for quality assurance and engineering design usage. Any material specifications that the cell manufacturers use were developed for cosmetic reasons that have no technical basis. Therefore, the Applied Solar Energy Corporation (ASEC) has sponsored a continuing program for the fracture mechanics evaluation of GaAs. Fracture mechanics concepts were utilized to develop an analytical model that can predict the critical crack size of solar cells. This model indicates that the edge cracks of a solar cell are more critical than its surface cracks. In addition, the model suggests that the material specifications on the allowable crack size used for Si solar cells should not be applied to GaAs solar cells. The analytical model was applied to Si and GaAs solar cells, but it would also be applicable to the semiconductor wafers of other materials, such as a GaAs thin film on a Ge substrate, using appropriate input data.

  19. Water holding capacities of fly ashes: Effect of size fractionation

    SciTech Connect (OSTI)

    Sarkar, A.; Rano, R.

    2007-07-01

    Water holding capacities of fly ashes from different thermal power plants in Eastern India have been compared. Moreover, the effect of size fractionation (sieving) on the water holding capacities has also been determined. The desorption rate of water held by the fly ash fractions at ambient temperature (25-30{sup o}C) has been investigated. The effect of mixing various size fractions of fly ash in increasing the water holding capacities of fly ash has been studied. It is observed that the fly ash obtained from a thermal power plant working on stoker-fired combustor has the highest water holding capacity, followed by the one that works on pulverized fuel combustor. Fly ash collected from super thermal power plant has the least water holding capacity (40.7%). The coarser size fractions of fly ashes in general have higher water holding capacities than the finer ones. An attempt has been made to correlate the results obtained, with the potential use in agriculture.

  20. DOE-Sponsored Online Mapping Portal Helps Oil and Gas Producers Comply with New Mexico Compliance Rules

    Broader source: Energy.gov [DOE]

    An online mapping portal to help oil and natural gas operators comply with a revised New Mexico waste pit rule has been developed by a team of New Mexico Tech researchers.

  1. Method for sizing and desizing yarns with liquid and supercritical carbon dioxide solvent

    DOE Patents [OSTI]

    Fulton, J.L.; Yonker, C.R.; Hallen, R.R.; Baker, E.G.; Bowman, L.E.; Silva, L.J.

    1999-01-26

    Disclosed is a method of sizing and desizing yarn, or more specifically to a method of coating yarn with size and removing size from yarn with liquid carbon dioxide solvent. 3 figs.

  2. Method for sizing and desizing yarns with liquid and supercritical carbon dioxide solvent

    DOE Patents [OSTI]

    Fulton, John L. (Richland, WA); Yonker, Clement R. (Richland, WA); Hallen, Richard R. (Richland, WA); Baker, Eddie G. (Richland, WA); Bowman, Lawrence E. (Richland, WA); Silva, Laura J. (Richland, WA)

    1999-01-01

    Disclosed is a method of sizing and desizing yarn, or more specifically to a method of coating yarn with size and removing size from yarn with liquid carbon dioxide solvent.

  3. Strategies for automatic online treatment plan reoptimization using clinical treatment planning system: A planning parameters study

    SciTech Connect (OSTI)

    Li, Taoran; Wu, Qiuwen; Zhang, You; Vergalasova, Irina; Lee, W. Robert; Yin, Fang-Fang; Wu, Q. Jackie

    2013-11-15

    Purpose: Adaptive radiation therapy for prostate cancer using online reoptimization provides an improved control of interfractional anatomy variations. However, the clinical implementation of online reoptimization is currently limited by the low efficiency of current strategies and the difficulties associated with integration into the current treatment planning system. This study investigates the strategies for performing fast (?2 min) automatic online reoptimization with a clinical fluence-map-based treatment planning system; and explores the performance with different input parameters settings: dose-volume histogram (DVH) objective settings, starting stage, and iteration number (in the context of real time planning).Methods: Simulated treatments of 10 patients were reoptimized daily for the first week of treatment (5 fractions) using 12 different combinations of optimization strategies. Options for objective settings included guideline-based RTOG objectives, patient-specific objectives based on anatomy on the planning CT, and daily-CBCT anatomy-based objectives adapted from planning CT objectives. Options for starting stages involved starting reoptimization with and without the original plan's fluence map. Options for iteration numbers were 50 and 100. The adapted plans were then analyzed by statistical modeling, and compared both in terms of dosimetry and delivery efficiency.Results: All online reoptimized plans were finished within ?2 min with excellent coverage and conformity to the daily target. The three input parameters, i.e., DVH objectives, starting stage, and iteration number, contributed to the outcome of optimization nearly independently. Patient-specific objectives generally provided better OAR sparing compared to guideline-based objectives. The benefit in high-dose sparing from incorporating daily anatomy into objective settings was positively correlated with the relative change in OAR volumes from planning CT to daily CBCT. The use of the original plan fluence map as the starting stage reduced OAR dose at the mid-dose region, but increased the monitor units by 17%. Differences of only 2cc or less in OAR V50%/V70Gy/V76Gy were observed between 100 and 50 iterations.Conclusions: It is feasible to perform automatic online reoptimization in ?2 min using a clinical treatment planning system. Selecting optimal sets of input parameters is the key to achieving high quality reoptimized plans, and should be based on the individual patient's daily anatomy, delivery efficiency, and time allowed for plan adaptation.

  4. " Row: Employment Sizes within NAICS Codes;"

    U.S. Energy Information Administration (EIA) Indexed Site

    3. Consumption Ratios of Fuel, 1998;" " Level: National Data; " " Row: Employment Sizes within NAICS Codes;" " Column: Energy-Consumption Ratios;" " Unit: Varies." " "," ",,,"Consumption"," " " "," ",,"Consumption","per Dollar" " "," ","Consumption","per Dollar","of Value","RSE" "NAICS",,"per

  5. " Row: Employment Sizes within NAICS Codes;"

    U.S. Energy Information Administration (EIA) Indexed Site

    4 Consumption Ratios of Fuel, 2002;" " Level: National Data; " " Row: Employment Sizes within NAICS Codes;" " Column: Energy-Consumption Ratios;" " Unit: Varies." " "," ",,,"Consumption"," " " "," ",,"Consumption","per Dollar" " "," ","Consumption","per Dollar","of Value","RSE" "NAICS",,"per

  6. " Row: Employment Sizes within NAICS Codes;"

    U.S. Energy Information Administration (EIA) Indexed Site

    4 Consumption Ratios of Fuel, 2006;" " Level: National Data; " " Row: Employment Sizes within NAICS Codes;" " Column: Energy-Consumption Ratios;" " Unit: Varies." ,,,,"Consumption" ,,,"Consumption","per Dollar" ,,"Consumption","per Dollar","of Value" "NAICS",,"per Employee","of Value Added","of Shipments" "Code(a)","Economic

  7. " Row: Employment Sizes within NAICS Codes;"

    U.S. Energy Information Administration (EIA) Indexed Site

    4 Consumption Ratios of Fuel, 2010;" " Level: National Data; " " Row: Employment Sizes within NAICS Codes;" " Column: Energy-Consumption Ratios;" " Unit: Varies." ,,,,"Consumption" ,,,"Consumption","per Dollar" ,,"Consumption","per Dollar","of Value" "NAICS",,"per Employee","of Value Added","of Shipments" "Code(a)","Economic

  8. Micro-size gas turbines create market opportunities

    SciTech Connect (OSTI)

    Scott, W.G.

    1997-09-01

    Power plants in the 25 to 250 kW-size range will enable utilities, IPPs and ESCOs to provide economic power for a variety of applications. Small, low-cost, highly efficient gas turbines provide the utility industry with a four-generation technology that features numerous benefits and potential applications. These include firm power to isolated communities, commercial centers and industries; peak shaving for utility systems to reduce the incremental cost of additional loads; peak shaving for large commercial and industrial establishments to reduce demand charges, as well as standby, emergency power and uninterruptible power supply (UPS).

  9. Table B10. Employment Size Category, Number of Buildings, 1999

    U.S. Energy Information Administration (EIA) Indexed Site

    0. Employment Size Category, Number of Buildings, 1999" ,"Number of Buildings (thousand)" ,"All Buildings","Number of Workers" ,,"Fewer than 5 Workers","5 to 9 Workers","10 to 19 Workers","20 to 49 Workers","50 to 99 Workers","100 to 249 Workers","250 or More Workers" "All Buildings ................",4657,2376,807,683,487,174,90,39 "Building Floorspace" "(Square

  10. Neutrons measure phase behavior in pores at Angstrom size

    SciTech Connect (OSTI)

    Bardoel, Agatha A; Melnichenko, Yuri B

    2012-01-01

    Researchers have measured the phase behavior of green house gases in pores at the Angstrom-level, using small angle neutron scattering (SANS) at the Oak Ridge National Laboratory's High Flux Isotope Reactor. Yuri Melnichenko, an instrument scientist on the General Purpose Small Angle Neutron Scattering (GP SANS) Diffractometer at ORNL's High Flux Isotope Reactor, his postdoctoral associate Lilin He and collaborators Nidia Gallego and Cristian Contescu from the Material Sciences Division (ORNL) were engaged in the work. They were studying nanoporous carbons to assess their attractiveness as storage media for hydrogen, with a view to potential use for on-board hydrogen storage for transportation applications. Nanoporous carbons can also serve as electrode material for supercapacitors and batteries. The researchers successfully determined that the most efficiently condensing pore size in a carbon nanoporous material for hydrogen storage is less than one nanometer. In a paper recently published by the Journal of the American Chemical Society, the collaborators used small angle neutron scattering to study how hydrogen condenses in small pores at ambient temperature. They discovered that the surface-molecule interactions create internal pressures in pores that may exceed the external gas pressure by a factor of up to 50. 'This is an exciting result,' Melnichenko said, 'as you achieve extreme densification in pores 'for free', i.e. without spending any energy. These results can be used to guide the development of new carbon adsorbents tailored to maximize hydrogen storage capacities.' Another important factor that defines the adsorption capacity of sub-nanometer pores is their shape. In order to get accurate structural information and maximize sorption capacity, it is important that pores are small and of approximately uniform size. In collaboration with Drexel University's Yury Gogotsi who supplied the samples, Melnichenko and his collaborators used the GP SANS instrument to study how the size and shape of pores in sub-nanometer porous carbons varies, depending on the manufacturing conditions. While small angle X-ray scattering (SAXS) can do the job too, Melnichenko says, the SANS method broke new ground in analyzing the shape and behavior of pores at subnanometer size, when subjected to varying synthesis temperature. 'We found that these very small pores are in fact spherical, and that when we change the synthesis conditions, they become elongated, even 'slit-like', and all of this on a subnanometer scale,' Melnichenko said.

  11. Size reduction techniques for vital compliant VHDL simulation models

    DOE Patents [OSTI]

    Rich, Marvin J.; Misra, Ashutosh

    2006-08-01

    A method and system select delay values from a VHDL standard delay file that correspond to an instance of a logic gate in a logic model. Then the system collects all the delay values of the selected instance and builds super generics for the rise-time and the fall-time of the selected instance. Then, the system repeats this process for every delay value in the standard delay file (310) that correspond to every instance of every logic gate in the logic model. The system then outputs a reduced size standard delay file (314) containing the super generics for every instance of every logic gate in the logic model.

  12. Size-dependent structure of silver nanoparticles under high pressure

    SciTech Connect (OSTI)

    Koski, Kristie Jo

    2008-12-31

    Silver noble metal nanoparticles that are<10 nm often possess multiply twinned grains allowing them to adopt shapes and atomic structures not observed in bulk materials. The properties exhibited by particles with multiply twinned polycrystalline structures are often far different from those of single-crystalline particles and from the bulk. I will present experimental evidence that silver nanoparticles<10 nm undergo a reversible structural transformation under hydrostatic pressures up to 10 GPa. Results for nanoparticles in the intermediate size range of 5 to 10 nm suggest a reversible linear pressure-dependent rhombohedral distortion which has not been previously observed in bulk silver. I propose a mechanism for this transitiion that considers the bond-length distribution in idealized multiply twinned icosahedral particles. Results for nanoparticles of 3.9 nm suggest a reversible linear pressure-dependent orthorhombic distortion. This distortion is interpreted in the context of idealized decahedral particles. In addition, given these size-dependent measurements of silver nanoparticle compression with pressure, we have constructed a pressure calibration curve. Encapsulating these silver nanoparticles in hollow metal oxide nanospheres then allows us to measure the pressure inside a nanoshell using x-ray diffraction. We demonstrate the measurement of pressure gradients across nanoshells and show that these nanoshells have maximum resolved shear strengths on the order of 500 MPa to IGPa.

  13. Particle impactor assembly for size selective high volume air sampler

    DOE Patents [OSTI]

    Langer, Gerhard (Boulder, CO)

    1988-08-16

    Air containing entrained particulate matter is directed through a plurality of parallel, narrow, vertically oriented impactor slots of an inlet element toward an adjacently located, relatively large, dust impaction surface preferably covered with an adhesive material. The air flow turns over the impaction surface, leaving behind the relatively larger particles according to the human thoracic separation system and passes through two elongate exhaust apertures defining the outer bounds of the impaction collection surface to pass through divergent passages which slow down and distribute the air flow, with entrained smaller particles, over a fine filter element that separates the fine particles from the air. The elongate exhaust apertures defining the impaction collection surface are spaced apart by a distance greater than the lengths of elongate impactor slots in the inlet element and are oriented to be normal thereto. By appropriate selection of dimensions and the number of impactor slots air flow through the inlet element is provided a nonuniform velocity distribution with the lower velocities being obtained near the center of the impactor slots, in order to separate out particles larger than a certain predetermined size on the impaction collection surface. The impaction collection surface, even in a moderately sized apparatus, is thus relatively large and permits the prolonged sampling of air for periods extending to four weeks.

  14. The intrinsic two-dimensional size of Sagittarius A*

    SciTech Connect (OSTI)

    Bower, Geoffrey C.; Markoff, Sera; Brunthaler, Andreas; Falcke, Heino; Law, Casey; Maitra, Dipankar; Clavel, M.; Goldwurm, A.; Morris, M. R.; Witzel, Gunther; Meyer, Leo; Ghez, A. M.

    2014-07-20

    We report the detection of the two-dimensional structure of the radio source associated with the Galactic Center black hole, Sagittarius A*, obtained from Very Long Baseline Array observations at a wavelength of 7 mm. The intrinsic source is modeled as an elliptical Gaussian with major-axis size 35.4 12.6 R{sub S} in position angle 95 east of north. This morphology can be interpreted in the context of both jet and accretion disk models for the radio emission. There is supporting evidence in large angular-scale multi-wavelength observations for both source models for a preferred axis near 95. We also place a maximum peak-to-peak change of 15% in the intrinsic major-axis size over five different epochs. Three observations were triggered by detection of near infrared (NIR) flares and one was simultaneous with a large X-ray flare detected by NuSTAR. The absence of simultaneous and quasi-simultaneous flares indicates that not all high energy events produce variability at radio wavelengths. This supports the conclusion that NIR and X-ray flares are primarily due to electron excitation and not to an enhanced accretion rate onto the black hole.

  15. Method of assembly of molecular-sized nets and scaffolding

    DOE Patents [OSTI]

    Michl, Josef; Magnera, Thomas F.; David, Donald E.; Harrison, Robin M.

    1999-01-01

    The present invention relates to methods and starting materials for forming molecular-sized grids or nets, or other structures based on such grids and nets, by creating molecular links between elementary molecular modules constrained to move in only two directions on an interface or surface by adhesion or bonding to that interface or surface. In the methods of this invention, monomers are employed as the building blocks of grids and more complex structures. Monomers are introduced onto and allowed to adhere or bond to an interface. The connector groups of adjacent adhered monomers are then polymerized with each other to form a regular grid in two dimensions above the interface. Modules that are not bound or adhered to the interface are removed prior to reaction of the connector groups to avoid undesired three-dimensional cross-linking and the formation of non-grid structures. Grids formed by the methods of this invention are useful in a variety of applications, including among others, for separations technology, as masks for forming regular surface structures (i.e., metal deposition) and as templates for three-dimensional molecular-sized structures.

  16. Method of assembly of molecular-sized nets and scaffolding

    DOE Patents [OSTI]

    Michl, J.; Magnera, T.F.; David, D.E.; Harrison, R.M.

    1999-03-02

    The present invention relates to methods and starting materials for forming molecular-sized grids or nets, or other structures based on such grids and nets, by creating molecular links between elementary molecular modules constrained to move in only two directions on an interface or surface by adhesion or bonding to that interface or surface. In the methods of this invention, monomers are employed as the building blocks of grids and more complex structures. Monomers are introduced onto and allowed to adhere or bond to an interface. The connector groups of adjacent adhered monomers are then polymerized with each other to form a regular grid in two dimensions above the interface. Modules that are not bound or adhered to the interface are removed prior to reaction of the connector groups to avoid undesired three-dimensional cross-linking and the formation of non-grid structures. Grids formed by the methods of this invention are useful in a variety of applications, including among others, for separations technology, as masks for forming regular surface structures (i.e., metal deposition) and as templates for three-dimensional molecular-sized structures. 9 figs.

  17. A VME multiprocessor system for on-line data analysis of nuclear physics experiments

    SciTech Connect (OSTI)

    Maron, G.; Vedovato, G ); Negro, A.; Parlati, G. )

    1990-06-01

    A VME based multiprocessor system for on-line data analysis is presented. The system is based on a master CPU board that distributes incoming event buffers to several slave CPUs running the same analysis program. A large shared memory is provided to hold final histograms. A Vaxstation, linked to the system via Ethernet, provides control and graphics management of the analyzed data. A numerical simulation of the system is described and results are compared with real performance obtained using a prototype of the system.

  18. Raman Scattering Sensor for On-Line Monitoring of Amines and Acid Gases

    SciTech Connect (OSTI)

    Uibel, Rory; Smith, Lee

    2010-05-20

    Sulfur and CO2 removal from hydrocarbon streams and power plant effluents are a major problem. The sulfur is normally in the form of H2S. These two acid gases are scrubbed using aqueous amine solutions that are difficult to control with conventional technology. Process Instruments Inc. developed Raman scattering technology for on-line, real-time monitoring of amine streams to improve their efficiency in scrubbing H2S and CO2 from hydrocarbon streams and power plant effluents. Improved control of amine and acid gas concentrations will allow refineries, natural gas processes and power plants to more efficiently scrub Sulfur and CO2, saving energy, time and financial resources.

  19. ESnet Releases Open Source Software from MyESnet Portal for Building Online

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Interactive Network Portals Releases Open Source Software from MyESnet Portal for Building Online Interactive Network Portals News & Publications ESnet News Media & Press Publications and Presentations Galleries ESnet Awards and Honors Contact Us Media Jon Bashor, jbashor@lbl.gov, +1 510 486 5849 or Media@es.net Technical Assistance: 1 800-33-ESnet (Inside the US) 1 800-333-7638 (Inside the US) 1 510-486-7600 (Globally) 1 510-486-7607 (Globally) Report Network Problems:

  20. Feasibility of on-line fuel-condition monitoring. [PWR; BWR

    SciTech Connect (OSTI)

    Petti, D.A.; Osetek, D.J.; Croucher, D.W.; Hartwell, J.K.

    1982-01-01

    The relationship between fuel rod damage and fission product release is investigated to assess the feasibility of using on-line gamma spectroscopy of reactor coolant to estimate not only numbers of detected fuel rods, but also the type of core damage which may occur during an accident or off-normal transient. Fission product release signatures for various fuel conditions and accident scenarios are compared, and unique indicators of fuel damage, ranging from cladding pinholes to severely damaged fuel rods, are suggested, The configuration of monitoring hardware and data analysis soft ware are described, and the benefits, development needs, and usefulness of the envisaged power plant system are discussed.

  1. Size-exclusion chromatography system for macromolecular interaction analysis

    DOE Patents [OSTI]

    Stevens, Fred J.

    1988-01-01

    A low pressure, microcomputer controlled system employing high performance liquid chromatography (HPLC) allows for precise analysis of the interaction of two reversibly associating macromolecules such as proteins. Since a macromolecular complex migrates faster than its components during size-exclusion chromatography, the difference between the elution profile of a mixture of two macromolecules and the summation of the elution profiles of the two components provides a quantifiable indication of the degree of molecular interaction. This delta profile is used to qualitatively reveal the presence or absence of significant interaction or to rank the relative degree of interaction in comparing samples and, in combination with a computer simulation, is further used to quantify the magnitude of the interaction in an arrangement wherein a microcomputer is coupled to analytical instrumentation in a novel manner.

  2. Strengthening of metallic alloys with nanometer-size oxide dispersions

    DOE Patents [OSTI]

    Flinn, J.E.; Kelly, T.F.

    1999-06-01

    Austenitic stainless steels and nickel-base alloys containing, by wt. %, 0.1 to 3.0% V, 0.01 to 0.08% C, 0.01 to 0.5% N, 0.05% max. each of Al and Ti, and 0.005 to 0.10% O, are strengthened and ductility retained by atomization of a metal melt under cover of an inert gas with added oxygen to form approximately 8 nanometer-size hollow oxides within the alloy grains and, when the alloy is aged, strengthened by precipitation of carbides and nitrides nucleated by the hollow oxides. Added strengthening is achieved by nitrogen solid solution strengthening and by the effect of solid oxides precipitated along and pinning grain boundaries to provide temperature-stabilization and refinement of the alloy grains. 20 figs.

  3. Oscillating magnetocaloric effect in size-quantized diamagnetic film

    SciTech Connect (OSTI)

    Alisultanov, Z. Z.

    2014-03-21

    We investigate the oscillating magnetocaloric effect on a size-quantized diamagnetic film in a transverse magnetic field. We obtain the analytical expression for the thermodynamic potential in case of the arbitrary spectrum of carriers. The entropy change is shown to be the oscillating function of the magnetic field and the film thickness. The nature of this effect is the same as for the de Haas–van Alphen effect. The magnetic part of entropy has a maximal value at some temperature. Such behavior of the entropy is not observed in magneto-ordered materials. We discuss the nature of unusual behavior of the magnetic entropy. We compare our results with the data obtained for 2D and 3D cases.

  4. Strengthening of metallic alloys with nanometer-size oxide dispersions

    DOE Patents [OSTI]

    Flinn, John E. (Idaho Falls, ID); Kelly, Thomas F. (Madison, WI)

    1999-01-01

    Austenitic stainless steels and nickel-base alloys containing, by wt. %, 0.1 to 3.0% V, 0.01 to 0.08% C, 0.01 to 0.5% N, 0.05% max. each of Al and Ti, and 0.005 to 0.10% O, are strengthened and ductility retained by atomization of a metal melt under cover of an inert gas with added oxygen to form approximately 8 nanometer-size hollow oxides within the alloy grains and, when the alloy is aged, strengthened by precipitation of carbides and nitrides nucleated by the hollow oxides. Added strengthening is achieved by nitrogen solid solution strengthening and by the effect of solid oxides precipitated along and pinning grain boundaries to provide temperature-stabilization and refinement of the alloy grains.

  5. Medium-size high-temperature gas-cooled reactor

    SciTech Connect (OSTI)

    Peinado, C.O.; Koutz, S.L.

    1980-08-01

    This report summarizes high-temperature gas-cooled reactor (HTGR) experience for the 40-MW(e) Peach Bottom Nuclear Generating Station of Philadelphia Electric Company and the 330-MW(e) Fort St. Vrain Nuclear Generating Station of the Public Service Company of Colorado. Both reactors are graphite moderated and helium cooled, operating at approx. 760/sup 0/C (1400/sup 0/F) and using the uranium/thorium fuel cycle. The plants have demonstrated the inherent safety characteristics, the low activation of components, and the high efficiency associated with the HTGR concept. This experience has been translated into the conceptual design of a medium-sized 1170-MW(t) HTGR for generation of 450 MW of electric power. The concept incorporates inherent HTGR safety characteristics (a multiply redundant prestressed concrete reactor vessel (PCRV), a graphite core, and an inert single-phase coolant) and engineered safety features (core auxiliary cooling, relief valve, and steam generator dump systems).

  6. Energy Efficiency Services Sector: Workforce Size and Expectations for Growth

    SciTech Connect (OSTI)

    Goldman, Charles; Fuller, Merrian C.; Stuart, Elizabeth; Peters, Jane S.; McRae, Marjorie; Albers, Nathaniel; Lutzenhiser, Susan; Spahic, Mersiha

    2010-03-22

    The energy efficiency services sector (EESS) is poised to become an increasingly important part of the U.S. economy. Climate change and energy supply concerns, volatile and increasing energy prices, and a desire for greater energy independence have led many state and national leaders to support an increasingly prominent role for energy efficiency in U.S. energy policy. The national economic recession has also helped to boost the visibility of energy efficiency, as part of a strategy to support economic recovery. We expect investment in energy efficiency to increase dramatically both in the near-term and through 2020 and beyond. This increase will come both from public support, such as the American Recovery and Reinvestment Act (ARRA) and significant increases in utility ratepayer funds directed toward efficiency, and also from increased private spending due to codes and standards, increasing energy prices, and voluntary standards for industry. Given the growing attention on energy efficiency, there is a concern among policy makers, program administrators, and others that there is an insufficiently trained workforce in place to meet the energy efficiency goals being put in place by local, state, and federal policy. To understand the likelihood of a potential workforce gap and appropriate response strategies, one needs to understand the size, composition, and potential for growth of the EESS. We use a bottom-up approach based upon almost 300 interviews with program administrators, education and training providers, and a variety of EESS employers and trade associations; communications with over 50 sector experts; as well as an extensive literature review. We attempt to provide insight into key aspects of the EESS by describing the current job composition, the current workforce size, our projections for sector growth through 2020, and key issues that may limit this growth.

  7. Development of On-Line Spectroscopic pH Monitoring for Nuclear Fuel Reprocessing Plants: Weak Acid Schemes

    SciTech Connect (OSTI)

    Casella, Amanda J.; Hylden, Laura R.; Campbell, Emily L.; Levitskaia, Tatiana G.; Peterson, James M.; Smith, Frances N.; Bryan, Samuel A.

    2015-05-19

    Knowledge of real-time solution properties and composition is a necessity for any spent nuclear fuel reprocessing method. Metal-ligand speciation in aqueous solutions derived from the dissolved commercial spent fuel is highly dependent upon the acid concentration/pH, which influences extraction efficiency and the resulting speciation in the organic phase. Spectroscopic process monitoring capabilities, incorporated in a counter current centrifugal contactor bank, provide a pathway for on-line real-time measurement of solution pH. The spectroscopic techniques are process-friendly and can be easily configured for on-line applications, while classic potentiometric pH measurements require frequent calibration/maintenance and have poor long-term stability in aggressive chemical and radiation environments. Our research is focused on developing a general method for on-line determination of pH of aqueous solutions through chemometric analysis of Raman spectra. Interpretive quantitative models have been developed and validated under the range of chemical composition and pH using a lactic acid/lactate buffer system. The developed model was applied to spectra obtained on-line during solvent extractions performed in a centrifugal contactor bank. The model predicted the pH within 11% for pH > 2, thus demonstrating that this technique could provide the capability of monitoring pH on-line in applications such as nuclear fuel reprocessing.

  8. Reducing the size of a data base by using pattern-recognition techniques

    SciTech Connect (OSTI)

    Clapp, N.E. Jr.

    1982-01-01

    An on-line surveillance system at a nuclear power plant samples data and calculates the power spectral density. A method of reducing the amount of stored data by screening the data using a pattern recognition technique was developed. The system stores only the spectra that differ from normal, plus the corresponding plant operating conditions. 7 figures.

  9. R and D of On-line Reprocessing Technology for Molten-Salt Reactor Systems

    SciTech Connect (OSTI)

    Uhlir, Jan; Tulackova, Radka; Chuchvalcova Bimova, Karolina

    2006-07-01

    The Molten Salt Reactor (MSR) represents one of promising future nuclear reactor concept included in the Generation IV reactors family. The reactor can be operated as the thorium breeder or as the actinide transmuter. However, the future deployment of Molten-Salt Reactors will be significantly dependent on the successful mastering of advanced reprocessing technologies dedicated to their fuel cycle. Here the on-line reprocessing technology connected with the fuel circuit of MSR is of special importance because the reactor cannot be operated for a long run without the fuel salt clean-up. Generally, main MSR reprocessing technologies are pyrochemical, majority of them are fluoride technologies. The proposed flow-sheets of MSR on-line reprocessing are based on a combination of molten-salt / liquid metal extraction and electro-separation processes, which can be added to the gas extraction process already verified during the MSRE project in ORNL. The crucial separation method proposed for partitioning of actinides from fission products is based on successive Anodic dissolution and Cathodic deposition processes in molten fluoride media. (authors)

  10. On-Line Microbial Whole Effluent Toxicity Monitoring for Industrial Wastewater

    SciTech Connect (OSTI)

    Mathews, S; Hoppes, W; Mascetti, M; Campbell, C G

    2002-09-17

    In this study a respirometer is tested for its ability to act as an early upset warning device and whole effluent toxicity monitor for industrial discharge. Industrial discharge water quality is commonly evaluated by comparing measured chemical concentrations to target values or regulatory limits established by governmental agencies. Unless the regulatory values are based upon empirical data, the actual effect of the discharge on aquatic systems is unknown. At the same time assessing the environmental toxicology of wastewater discharges is complicated by synergistic relationships among chemical constituents producing greater total toxicity. For example, metals may be more toxic in waters with low total hardness or more soluble at lower pH. An alternative approach that we are investigating is whole effluent toxicity testing. This study investigates the measurement of whole effluent toxicity through an on-line respirometer that measures toxicity to microorganisms comprising activated sludge. In this approach the oxygen uptake rate is monitored and used as an indicator of microbial activity or health. This study investigates the use of an online whole effluent toxicity testing system to provide early upset warning and the consistency of measured response to low pH. Repeated exposure of the microorganisms to low pH results in reduced sensitivity of the microbial population. We investigate whether this reduction in sensitivity results from physiological acclimation or changes in species composition. We identify promising applications, where, with proper calibration, respirometry based toxicity monitoring appear to be well suited for relative comparisons of whole effluent toxicity.

  11. Online National Solar Energy Directory and 2005 Solar Decathlon Product Directory. Final report

    SciTech Connect (OSTI)

    Hamm, Julia; Taylor, Mike

    2008-12-31

    The Solar Electric Power Association (SEPA), in partnership with the American Solar Energy Society, developed an online National Solar Energy Directory with clear, comprehensive information on suppliers and purchasing options. The site was originally located at FindSolar.com, but has recently been moved to Find-Solar.org. The original FindSolar.com domain name has been taken by the American Solar Energy Society (a partner in this project) and utilized for a similar but different project. This Find-Solar.org directory offers the rapidly growing base of potential solar customers a simple, straightforward destination to learn about their solar options. Members of the public are able to easily locate contractors in their geographic area and verify companies?? qualifications with accurate third-party information. It allows consumers to obtain key information on the economics, incentives, desirability, and workings of a solar energy system, as well as competing quotes from different contractors and reviews from customers they have worked with previously. Find-Solar.org is a means of facilitating the growing public interest in solar power and overcoming a major barrier to widespread development of U.S. solar markets. In addition to the development of Find-Solar.org, SEPA developed a separate online product directory for the 2005 DOE Solar Decathlon to facilitate the communication of information about the energy efficiency and renewable energy products used in each university team??s home.

  12. Diode magnetic-field influence on radiographic spot size

    SciTech Connect (OSTI)

    Ekdahl, Carl A. Jr.

    2012-09-04

    Flash radiography of hydrodynamic experiments driven by high explosives is a well-known diagnostic technique in use at many laboratories. The Dual-Axis Radiography for Hydrodynamic Testing (DARHT) facility at Los Alamos was developed for flash radiography of large hydrodynamic experiments. Two linear induction accelerators (LIAs) produce the bremsstrahlung radiographic source spots for orthogonal views of each experiment ('hydrotest'). The 2-kA, 20-MeV Axis-I LIA creates a single 60-ns radiography pulse. For time resolution of the hydrotest dynamics, the 1.7-kA, 16.5-MeV Axis-II LIA creates up to four radiography pulses by slicing them out of a longer pulse that has a 1.6-{micro}s flattop. Both axes now routinely produce radiographic source spot sizes having full-width at half-maximum (FWHM) less than 1 mm. To further improve on the radiographic resolution, one must consider the major factors influencing the spot size: (1) Beam convergence at the final focus; (2) Beam emittance; (3) Beam canonical angular momentum; (4) Beam-motion blur; and (5) Beam-target interactions. Beam emittance growth and motion in the accelerators have been addressed by careful tuning. Defocusing by beam-target interactions has been minimized through tuning of the final focus solenoid for optimum convergence and other means. Finally, the beam canonical angular momentum is minimized by using a 'shielded source' of electrons. An ideal shielded source creates the beam in a region where the axial magnetic field is zero, thus the canonical momentum zero, since the beam is born with no mechanical angular momentum. It then follows from Busch's conservation theorem that the canonical angular momentum is minimized at the target, at least in principal. In the DARHT accelerators, the axial magnetic field at the cathode is minmized by using a 'bucking coil' solenoid with reverse polarity to cancel out whatever solenoidal beam transport field exists there. This is imperfect in practice, because of radial variation of the total field across the cathode surface, solenoid misalignments, and long-term variability of solenoid fields for given currents. Therefore, it is useful to quantify the relative importance of canonical momentum in determining the focal spot, and to establish a systematic methodology for tuning the bucking coils for minimum spot size. That is the purpose of this article. Section II provides a theoretical foundation for understanding the relative importance of the canonical momentum. Section III describes the results of simulations used to quantify beam parameters, including the momentum, for each of the accelerators. Section IV compares the two accelerators, especially with respect to mis-tuned bucking coils. Finally, Section IV concludes with a methodology for optimizing the bucking coil settings.

  13. Electric mergers: Transmission pricing, market size, and effects on competition

    SciTech Connect (OSTI)

    Legato, C.D.

    1996-06-01

    The prospect of deregulation has introducted a wave of mergers among electric utilities. Most of these mergers would fail an antitrust review because, by combining generation assets of interconnected utilities, they have substantially reduced potential competition in generation. In fact, one can predict that most mergers of utilities that operate within the same power pool or reliability region will be anticompetitive, even if they are not interconnected. Using an antitrust analysis, this article illustrates the potential anticompetitive effects of mergers between interconnected utilities. It concludes that the relevant geographic market will be an area in which a single, area-wide transmission price is charged. Moreover, it concludes that this area and, hence, the relevant market will likely span an area no larger than the Mid-American Interconnected Network or the Virginia/Carolina subregion of the Southeastern Reliability Council. Assuming markets of this size, the data on resulting concentration will show severe consequences for mergers of the sort that were announced in 1995 and 1996.

  14. Scaling Semantic Graph Databases in Size and Performance

    SciTech Connect (OSTI)

    Morari, Alessandro; Castellana, Vito G.; Villa, Oreste; Tumeo, Antonino; Weaver, Jesse R.; Haglin, David J.; Choudhury, Sutanay; Feo, John T.

    2014-08-06

    In this paper we present SGEM, a full software system for accelerating large-scale semantic graph databases on commodity clusters. Unlike current approaches, SGEM addresses semantic graph databases by only employing graph methods at all the levels of the stack. On one hand, this allows exploiting the space efficiency of graph data structures and the inherent parallelism of graph algorithms. These features adapt well to the increasing system memory and core counts of modern commodity clusters. On the other hand, however, these systems are optimized for regular computation and batched data transfers, while graph methods usually are irregular and generate fine-grained data accesses with poor spatial and temporal locality. Our framework comprises a SPARQL to data parallel C compiler, a library of parallel graph methods and a custom, multithreaded runtime system. We introduce our stack, motivate its advantages with respect to other solutions and show how we solved the challenges posed by irregular behaviors. We present the result of our software stack on the Berlin SPARQL benchmarks with datasets up to 10 billion triples (a triple corresponds to a graph edge), demonstrating scaling in dataset size and in performance as more nodes are added to the cluster.

  15. Tune In To Our Online Town Hall With Sec. Chu at 12:45PM EST | Department

    Energy Savers [EERE]

    of Energy Tune In To Our Online Town Hall With Sec. Chu at 12:45PM EST Tune In To Our Online Town Hall With Sec. Chu at 12:45PM EST January 26, 2011 - 8:35am Addthis Ginny Simmons Ginny Simmons Former Managing Editor for Energy.gov, Office of Public Affairs During the State of the Union address last night, President Obama placed the national spotlight on clean energy, saying that "we need to out-innovate, out-educate, and out-build the rest of the world," and that we must invest in

  16. Sandia Energy - Glitter-Sized Photovoltaic Cells in Utility-Scale...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Glitter-Sized Photovoltaic Cells in Utility-Scale Solar Power Systems Home Renewable Energy Energy News Photovoltaic Solar Glitter-Sized Photovoltaic Cells in Utility-Scale Solar...

  17. Effect of Engine-Out NOx Control Strategies on PM Size Distribution...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Engine-Out NOx Control Strategies on PM Size Distribution in Heavy-Duty Diesel Engines Developed for 2010 Effect of Engine-Out NOx Control Strategies on PM Size Distribution in ...

  18. Better Buildings Alliance, Advanced Rooftop Unit Campaign: RTU Sizing Guidance (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2014-09-01

    This fact sheet discusses the causes and consequences of incorrect RTU sizing (with respect to cooling tonnage and supply fan horsepower) and points to resources that can help ensure accurate sizing calculations.

  19. ON THE SIZE, SHAPE, AND DENSITY OF DWARF PLANET MAKEMAKE

    SciTech Connect (OSTI)

    Brown, M. E.

    2013-04-10

    A recent stellar occultation by the dwarf planet Makemake provided an excellent opportunity to measure the size and shape of one of the largest objects in the Kuiper belt. The analysis of these results provided what were reported to be precise measurements of the lengths of the projected axes, the albedo, and even the density of Makemake, but these results were, in part, derived from qualitative arguments. We reanalyzed the occultation timing data using a quantitative statistical description, and, in general, found the previously reported results on the shape of Makemake to be unjustified. In our solution, in which we use our inference from photometric data that Makemake is being viewed nearly pole-on, we find a 1{sigma} upper limit to the projected elongation of Makemake of 1.02, with measured equatorial diameter of 1434 {+-} 14 km and a projected polar diameter of 1422 {+-} 14 km, yielding an albedo of 0.81{sup +0.01}{sub -0.02}. If we remove the external constraint on the pole position of Makemake, we find instead a 1{sigma} upper limit to the elongation of 1.06, with a measured equatorial diameter of 1434{sup +48}{sub -18} km and a projected polar diameter of 1420{sup +18}{sub -24} km, yielding an albedo of 0.81{sup +0.03}{sub -0.05}. Critically, we find that the reported measurement of the density of Makemake was based on the misapplication of the volatile retention models. A corrected analysis shows that the occultation measurements provide no meaningful constraint on the density of Makemake.

  20. Building America Webinar: HVAC Right-Sizing Part 1-Calculating Loads |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy HVAC Right-Sizing Part 1-Calculating Loads Building America Webinar: HVAC Right-Sizing Part 1-Calculating Loads During this webinar, Building America Research Team IBACOS highlighted the key criteria required to create accurate heating and cooling load calculations. Current industry rules of thumb, perceptions and barriers to right-sizing HVAC were also discussed. File webinar_hvac_calculatingloads_20110428.wmv More Documents & Publications HVAC Right-Sizing Part 1:

  1. Online Identification of Power Required for Self-Sustainability of the Battery in Hybrid Electric Vehicles

    SciTech Connect (OSTI)

    Malikopoulos, Andreas

    2014-01-01

    Hybrid electric vehicles have shown great potential for enhancing fuel economy and reducing emissions. Deriving a power management control policy to distribute the power demanded by the driver optimally to the available subsystems (e.g., the internal combustion engine, motor, generator, and battery) has been a challenging control problem. One of the main aspects of the power management control algorithms is concerned with the self-sustainability of the electrical path, which must be guaranteed for the entire driving cycle. This paper considers the problem of identifying online the power required by the battery to maintain the state of charge within a range of the target value. An algorithm is presented that realizes how much power the engine needs to provide to the battery so that self-sustainability of the electrical path is maintained.

  2. GenomePeek—an online tool for prokaryotic genome and metagenome analysis

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    McNair, Katelyn; Edwards, Robert A.

    2015-06-16

    As increases in prokaryotic sequencing take place, a method to quickly and accurately analyze this data is needed. Previous tools are mainly designed for metagenomic analysis and have limitations; such as long runtimes and significant false positive error rates. The online tool GenomePeek (edwards.sdsu.edu/GenomePeek) was developed to analyze both single genome and metagenome sequencing files, quickly and with low error rates. GenomePeek uses a sequence assembly approach where reads to a set of conserved genes are extracted, assembled and then aligned against the highly specific reference database. GenomePeek was found to be faster than traditional approaches while still keeping errormore » rates low, as well as offering unique data visualization options.« less

  3. Intelligent on-line system for cycle chemistry diagnostics in power plants

    SciTech Connect (OSTI)

    Gallanti, M.; Tomada, L. ); Tarli, R. )

    1990-01-01

    Knowledge base techniques have been exploited for building PROP, a diagnostic system devoted to on-line monitoring and diagnosis of cycle water pollution phenomena in thermal power plants. After a presentation of the motivations that led CISE and ENEL to the development of an expert system for cycle chemistry control, the paper outlines the hardware and software architecture of PROP, and the characteristics of the operator interface. Then the PROP performance in the field test phase and during the first period of operation at the Fusina power plant are presented. In this paper, the authors discuss the general problem of expert system life cycle. Finally the verification and validation approach adopted in the PROP project is described.

  4. System and method for online inspection of turbines using an optical tube with broadspectrum mirrors

    DOE Patents [OSTI]

    Baleine, Erwan

    2015-12-22

    An optical inspection system for nondestructive internal visual inspection and non-contact infra-red (IR) temperature monitoring of an online, operating power generation turbine. The optical inspection system includes an optical tube having a viewing port, at least one reflective mirror or a mirror array having a reflectivity spectral range from 550 nm to 20 .mu.m, and capable of continuous operation at temperatures greater than 932 degrees Fahrenheit (500 degrees Celsius), and a transparent window with high transmission within the same spectral range mounted distal the viewing port. The same optical mirror array may be used to measure selectively surface temperature of metal turbine blades in the near IR range (approximately 1 .mu.m wavelength) and of thermal barrier coated turbine blades in the long IR range (approximately 10 .mu.m wavelength).

  5. On-line mechanical tube cleaning for steam electric power plants. Final report

    SciTech Connect (OSTI)

    Not Available

    1994-02-18

    In July 1991, Superior I.D. Tube Cleaners, Inc. (SIDTEC{trademark}) received a grant through the Department of Energy and the Energy Related Invention Program to conduct a long term demonstration of a proprietary technology for on-line mechanical condenser tube cleaning in thermal Power plants on open or once-through cooling water systems where the warmed condenser cooling water is discharged through a canal. The purpose of the demonstration was to confirm and establish the use of this mechanical method as an alternative to the application of chemical biocides in condenser cooling water for the control of biofouling, the growth of micro-organisms which can reduce a unit`s operating efficiency. The SIDTEC on-line mechanical tube cleaner, the Rocket{trademark}, is used to physically remove accumulated deposits on the water side of the main steam condenser, and the non-intrusive tube cleaner recovery system, the Skimmer{trademark}, is used to recover and recirculate tube cleaners. The periodic circulation of tube cleaners can maintain optimum condenser cleanliness and improve unit heat rate. Thermal power plants which discharge condenser cooling water through a canal now have a viable alternative to the chemical treatment of condenser cooling water, whether the principal foulant is biofouling, chemical scaling, silting, or a combination of the three. At prices competitive with scale inhibitors, and a fraction of competing mechanical systems, this technology is provided as a service requiring no capital investment; minimal retrofit modifications to plant structures or equipment; can be installed and maintained without a unit shutdown; does not add any restrictions in the cooling water system; and is environmentally benign.

  6. Online Monitoring of Concrete Structures in Nuclear Power Plants: Interim Report

    SciTech Connect (OSTI)

    Mahadevan, Sankaran; Cai, Guowei; Agarwal, Vivek

    2015-03-01

    The existing fleet of nuclear power plants in the United States have initial operating licenses of 40 years, and many of these plants have applied for and received license extensions. As plant structures, systems, and components age, their useful life—considering both structural integrity and performance—is reduced as a result of deterioration of the materials. Assessment and management of aging concrete structures in nuclear plants require a more systematic approach than simple reliance on existing code-based design margins of safety. Structural health monitoring is required to produce actionable information regarding structural integrity that supports operational and maintenance decisions. The online monitoring of concrete structures project conducted under the Advanced Instrumentation, Information, and Control Technologies Pathway of the Light Water Reactor Sustainability program at Idaho National Laboratory is seeking to develop and demonstrate capabilities for concrete structures health monitoring. Through this research project, several national laboratories and Vanderbilt University propose to develop a framework of research activities for the health monitoring of nuclear power plant concrete structures that includes the integration of four elements—damage modeling, monitoring, data analytics, and uncertainty quantification. This report briefly discusses activities in this project during October-December, 2014. The most significant activity during this period was the organizing of a two-day workshop on research needs in online monitoring of concrete structures, hosted by Vanderbilt University in November 2014. Thirty invitees from academia, industry and government participated in the workshop. The presentations and discussions at the workshop surveyed current activities related to concrete structures deterioration modeling and monitoring, and identified the challenges, knowledge gaps, and opportunities for advancing the state of the art; these discussions are summarized in this report

  7. Comparing Server Energy Use and Efficiency Using Small Sample Sizes

    SciTech Connect (OSTI)

    Coles, Henry C.; Qin, Yong; Price, Phillip N.

    2014-11-01

    This report documents a demonstration that compared the energy consumption and efficiency of a limited sample size of server-type IT equipment from different manufacturers by measuring power at the server power supply power cords. The results are specific to the equipment and methods used. However, it is hoped that those responsible for IT equipment selection can used the methods described to choose models that optimize energy use efficiency. The demonstration was conducted in a data center at Lawrence Berkeley National Laboratory in Berkeley, California. It was performed with five servers of similar mechanical and electronic specifications; three from Intel and one each from Dell and Supermicro. Server IT equipment is constructed using commodity components, server manufacturer-designed assemblies, and control systems. Server compute efficiency is constrained by the commodity component specifications and integration requirements. The design freedom, outside of the commodity component constraints, provides room for the manufacturer to offer a product with competitive efficiency that meets market needs at a compelling price. A goal of the demonstration was to compare and quantify the server efficiency for three different brands. The efficiency is defined as the average compute rate (computations per unit of time) divided by the average energy consumption rate. The research team used an industry standard benchmark software package to provide a repeatable software load to obtain the compute rate and provide a variety of power consumption levels. Energy use when the servers were in an idle state (not providing computing work) were also measured. At high server compute loads, all brands, using the same key components (processors and memory), had similar results; therefore, from these results, it could not be concluded that one brand is more efficient than the other brands. The test results show that the power consumption variability caused by the key components as a group is similar to all other components as a group. However, some differences were observed. The Supermicro server used 27 percent more power at idle compared to the other brands. The Intel server had a power supply control feature called cold redundancy, and the data suggest that cold redundancy can provide energy savings at low power levels. Test and evaluation methods that might be used by others having limited resources for IT equipment evaluation are explained in the report.

  8. A practical and theoretical definition of very small field size for radiotherapy output factor measurements

    SciTech Connect (OSTI)

    Charles, P. H. Crowe, S. B.; Langton, C. M.; Trapp, J. V.; Cranmer-Sargison, G.; Thwaites, D. I.; Kairn, T.; Knight, R. T.; Kenny, J.

    2014-04-15

    Purpose: This work introduces the concept of very small field size. Output factor (OPF) measurements at these field sizes require extremely careful experimental methodology including the measurement of dosimetric field size at the same time as each OPF measurement. Two quantifiable scientific definitions of the threshold of very small field size are presented. Methods: A practical definition was established by quantifying the effect that a 1 mm error in field size or detector position had on OPFs and setting acceptable uncertainties on OPF at 1%. Alternatively, for a theoretical definition of very small field size, the OPFs were separated into additional factors to investigate the specific effects of lateral electronic disequilibrium, photon scatter in the phantom, and source occlusion. The dominant effect was established and formed the basis of a theoretical definition of very small fields. Each factor was obtained using Monte Carlo simulations of a Varian iX linear accelerator for various square field sizes of side length from 4 to 100 mm, using a nominal photon energy of 6 MV. Results: According to the practical definition established in this project, field sizes ?15 mm were considered to be very small for 6 MV beams for maximal field size uncertainties of 1 mm. If the acceptable uncertainty in the OPF was increased from 1.0% to 2.0%, or field size uncertainties are 0.5 mm, field sizes ?12 mm were considered to be very small. Lateral electronic disequilibrium in the phantom was the dominant cause of change in OPF at very small field sizes. Thus the theoretical definition of very small field size coincided to the field size at which lateral electronic disequilibrium clearly caused a greater change in OPF than any other effects. This was found to occur at field sizes ?12 mm. Source occlusion also caused a large change in OPF for field sizes ?8 mm. Based on the results of this study, field sizes ?12 mm were considered to be theoretically very small for 6 MV beams. Conclusions: Extremely careful experimental methodology including the measurement of dosimetric field size at the same time as output factor measurement for each field size setting and also very precise detector alignment is required at field sizes at least ?12 mm and more conservatively?15 mm for 6 MV beams. These recommendations should be applied in addition to all the usual considerations for small field dosimetry, including careful detector selection.

  9. Method and apparatus for sizing and separating warp yarns using acoustical energy

    DOE Patents [OSTI]

    Sheen, Shuh-Haw (Naperville, IL); Chien, Hual-Te (Naperville, IL); Raptis, Apostolos C. (Downers Grove, IL); Kupperman, David S. (Oak Park, IL)

    1998-01-01

    A slashing process for preparing warp yarns for weaving operations including the steps of sizing and/or desizing the yarns in an acoustic resonance box and separating the yarns with a leasing apparatus comprised of a set of acoustically agitated lease rods. The sizing step includes immersing the yarns in a size solution contained in an acoustic resonance box. Acoustic transducers are positioned against the exterior of the box for generating an acoustic pressure field within the size solution. Ultrasonic waves that result from the acoustic pressure field continuously agitate the size solution to effect greater mixing and more uniform application and penetration of the size onto the yarns. The sized yarns are then separated by passing the warp yarns over and under lease rods. Electroacoustic transducers generate acoustic waves along the longitudinal axis of the lease rods, creating a shearing motion on the surface of the rods for splitting the yarns.

  10. Method and apparatus for sizing and separating warp yarns using acoustical energy

    DOE Patents [OSTI]

    Sheen, S.H.; Chien, H.T.; Raptis, A.C.; Kupperman, D.S.

    1998-05-19

    A slashing process is disclosed for preparing warp yarns for weaving operations including the steps of sizing and/or desizing the yarns in an acoustic resonance box and separating the yarns with a leasing apparatus comprised of a set of acoustically agitated lease rods. The sizing step includes immersing the yarns in a size solution contained in an acoustic resonance box. Acoustic transducers are positioned against the exterior of the box for generating an acoustic pressure field within the size solution. Ultrasonic waves that result from the acoustic pressure field continuously agitate the size solution to effect greater mixing and more uniform application and penetration of the size onto the yarns. The sized yarns are then separated by passing the warp yarns over and under lease rods. Electroacoustic transducers generate acoustic waves along the longitudinal axis of the lease rods, creating a shearing motion on the surface of the rods for splitting the yarns. 2 figs.

  11. Extracting magnetic cluster size and its distributions in advanced perpendicular recording media with shrinking grain size using small angle x-ray scattering

    SciTech Connect (OSTI)

    Mehta, Virat; Ikeda, Yoshihiro; Takano, Ken; Terris, Bruce D.; Hellwig, Olav; Wang, Tianhan; Wu, Benny; Graves, Catherine; Drr, Hermann A.; Scherz, Andreas; Sthr, Jo

    2015-05-18

    We analyze the magnetic cluster size (MCS) and magnetic cluster size distribution (MCSD) in a variety of perpendicular magnetic recording (PMR) media designs using resonant small angle x-ray scattering at the Co L{sub 3} absorption edge. The different PMR media flavors considered here vary in grain size between 7.5 and 9.5?nm as well as in lateral inter-granular exchange strength, which is controlled via the segregant amount. While for high inter-granular exchange, the MCS increases rapidly for grain sizes below 8.5?nm, we show that for increased amount of segregant with less exchange the MCS remains relatively small, even for grain sizes of 7.5 and 8?nm. However, the MCSD still increases sharply when shrinking grains from 8 to 7.5?nm. We show evidence that recording performance such as signal-to-noise-ratio on the spin stand correlates well with the product of magnetic cluster size and magnetic cluster size distribution.

  12. Investigation of the spatial resolution of an online dose verification device

    SciTech Connect (OSTI)

    Asuni, G.; Rickey, D. W.; McCurdy, B. M. C.

    2012-02-15

    Purpose: The aim of this work is to characterize a new online dose verification device, COMPASS transmission detector array (IBA Dosimetry, Schwarzenbruck, Germany). The array is composed of 1600 cylindrical ionization chambers of 3.8 mm diameter, separated by 6.5 mm center-to-center spacing, in a 40 x 40 arrangement. Methods: The line spread function (LSF) of a single ion chamber in the detector was measured with a narrow slit collimator for a 6 MV photon beam. The 0.25 x 10 mm{sup 2} slit was formed by two machined lead blocks. The LSF was obtained by laterally translating the detector in 0.25 mm steps underneath the slit over a range of 24 mm and taking a measurement at each step. This measurement was validated with Monte Carlo simulation using BEAMnrc and DOSXYZnrc. The presampling modulation transfer function (MTF), the Fourier transform of the line spread function, was determined and compared to calculated (Monte Carlo and analytical) MTFs. Two head-and-neck intensity modulated radiation therapy (IMRT) fields were measured using the device and were used to validate the LSF measurement. These fields were simulated with the BEAMnrc Monte Carlo model, and the Monte Carlo generated incident fluence was convolved with the 2D detector response function (derived from the measured LSF) to obtain calculated dose. The measured and calculated dose distributions were then quantitatively compared using {chi}-comparison criteria of 3% dose difference and 3 mm distance-to-agreement for in-field points (defined as those above the 10% maximum dose threshold). Results: The full width at half-maximum (FWHM) of the measured detector response for a single chamber is 4.3 mm, which is comparable to the chamber diameter of 3.8 mm. The pre-sampling MTF was calculated, and the resolution of one chamber was estimated as 0.25 lp/mm from the first zero crossing. For both examined IMRT fields, the {chi}-comparison between measured and calculated data show good agreement with 95.1% and 96.3% of in-field points below {chi} of 1.0 for fields 1 and 2, respectively (with an average {chi} of 0.29 for IMRT field 1 and 0.24 for IMRT field 2). Conclusions: The LSF for a new novel online detector has been measured at 6 MV using a narrow slit technique, and this measurement has been validated by Monte Carlo simulation. The detector response function derived from line spread function has been applied to recover measured IMRT fields. The results have shown that the device measures IMRT fields accurately within acceptable tolerance.

  13. On-line coating of glass with tin oxide by atmospheric pressure chemical vapor deposition.

    SciTech Connect (OSTI)

    Allendorf, Mark D.; Sopko, J.F. (PPF Industries, Pittsburgh, PA); Houf, William G.; Chae, Yong Kee; McDaniel, Anthony H.; Li, M. (PPF Industries, Pittsburgh, PA); McCamy, J.W.

    2006-11-01

    Atmospheric pressure chemical vapor deposition (APCVD) of tin oxide is a very important manufacturing technique used in the production of low-emissivity glass. It is also the primary method used to provide wear-resistant coatings on glass containers. The complexity of these systems, which involve chemical reactions in both the gas phase and on the deposition surface, as well as complex fluid dynamics, makes process optimization and design of new coating reactors a very difficult task. In 2001 the U.S. Dept. of Energy Industrial Technologies Program Glass Industry of the Future Team funded a project to address the need for more accurate data concerning the tin oxide APCVD process. This report presents a case study of on-line APCVD using organometallic precursors, which are the primary reactants used in industrial coating processes. Research staff at Sandia National Laboratories in Livermore, CA, and the PPG Industries Glass Technology Center in Pittsburgh, PA collaborated to produce this work. In this report, we describe a detailed investigation of the factors controlling the growth of tin oxide films. The report begins with a discussion of the basic elements of the deposition chemistry, including gas-phase thermochemistry of tin species and mechanisms of chemical reactions involved in the decomposition of tin precursors. These results provide the basis for experimental investigations in which tin oxide growth rates were measured as a function of all major process variables. The experiments focused on growth from monobutyltintrichloride (MBTC) since this is one of the two primary precursors used industrially. There are almost no reliable growth-rate data available for this precursor. Robust models describing the growth rate as a function of these variables are derived from modeling of these data. Finally, the results are used to conduct computational fluid dynamic simulations of both pilot- and full-scale coating reactors. As a result, general conclusions are reached concerning the factors affecting the growth rate in on-line APCVD reactors. In addition, a substantial body of data was generated that can be used to model many different industrial tin oxide coating processes. These data include the most extensive compilation of thermochemistry for gas-phase tin-containing species as well as kinetic expressions describing tin oxide growth rates over a wide range of temperatures, pressures, and reactant concentrations.

  14. A Robust and Flexible Design for GCEP Unattended Online Enrichment Monitoring: An OLEM Collection Node Network

    SciTech Connect (OSTI)

    Younkin, James R; March-Leuba, Jose A; Garner, James R

    2013-01-01

    Oak Ridge National Laoratory (ORNL) has engineered an on-line enrichment monitor (OLEM) to continuously measure U-235 emissions from the UF6 gas flowing through a unit header pipe of a gas centrifuge enrichment plant (GCEP) as a component of the International Atomic Energy Agency s (IAEA) new generation of technology to support enrichment plant safeguards1. In contrast to other enrichment monitoring approaches, OLEM calibrates and corrects for the pressure and temperature dependent UF6 gas-density without external radiation sources by using the inherent unit header pipe pressure dynamics and combining U-235 gamma-ray spectrometery using a shielded NaI detector with gas pressure and temperature data near the spectrum measurement point to obtain the enrichment of the gas as a function of time. From a safeguards perspective, OLEM can provide early detection of a GCEP being misused for production of highly enriched uranium, but would not detect directly the isolation and use of a cascade within the production unit to produce HEU. OLEM may also reduce the number of samples collected for destructive assay and, if coupled with load cell monitoring, could support isotope mass balance verification and unattended cylinder verification. The earlier paper presented OLEM as one component along with shared load cells and unattended cylinder verification, in the IAEA emering toolbox for unattended instruments at GCEPs1 and described the OLEM concept and how previous modeling studies and field measurements helped confirm the viability of a passive on-line enrichment monitor for meeting IAEA objectives and to support the development of performance targets. Phase I of the United States Support Program (USSP) OLEM project completed a preliminary hardware, software and communications design; phase II will build and test field prototypes in controlled laboratory settings and then at an operational facility. That paper also discussed many of the OLEM collection node commercial off the shelf (COTS) components and summarized the OLEM collection node data security provisions. This paper will discuss a secure and redundant network of OLEM collection nodes, auxiliary detection units and supporting junction boxes distributed throughout a facility for monitoring enrichment on product, feed and tails unit header pipes; the purpose and capability of the built-in Electronic Optical Sealing System (EOSS) network gateway; and a network approach for obtaining reliable and authenticated pressure measurements.

  15. CBEI: Lessons Learned from Integrated Retrofits in Small and Medium Sized

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Commercial Buildings - 2015 Peer Review | Department of Energy Lessons Learned from Integrated Retrofits in Small and Medium Sized Commercial Buildings - 2015 Peer Review CBEI: Lessons Learned from Integrated Retrofits in Small and Medium Sized Commercial Buildings - 2015 Peer Review Presenter: Mark Stutman, PSU View the Presentation PDF icon CBEI: Lessons Learned from Integrated Retrofits in Small and Medium Sized Commercial Buildings - 2015 Peer Review More Documents & Publications

  16. CBEI: Packaged Masonry Wall Retrofit Solution for Small and Medium Sized

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Commercial Buildings - 2015 Peer Review | Department of Energy Packaged Masonry Wall Retrofit Solution for Small and Medium Sized Commercial Buildings - 2015 Peer Review CBEI: Packaged Masonry Wall Retrofit Solution for Small and Medium Sized Commercial Buildings - 2015 Peer Review Presenter: Mugdha Mokashi, Bayer Materials View the Presentation PDF icon CBEI: Packaged Masonry Wall Retrofit Solution for Small and Medium Sized Commercial Buildings - 2015 Peer Review More Documents &

  17. Current Size and Remaining Market Potential of the U.S. Energy Service

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Company Industry | Department of Energy Current Size and Remaining Market Potential of the U.S. Energy Service Company Industry Current Size and Remaining Market Potential of the U.S. Energy Service Company Industry The study analyzes the size, growth and trends in the U.S. energy service company (ESCO) industry, drawing on information provided by industry executives and experts in 2012. The report also provides a preliminary estimate of remaining investment potential and annual blended

  18. CBEI: AHU FDD in Small and Medium Sized Commercial Buildings - 2015 Peer

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Review | Department of Energy AHU FDD in Small and Medium Sized Commercial Buildings - 2015 Peer Review CBEI: AHU FDD in Small and Medium Sized Commercial Buildings - 2015 Peer Review Presenter: Jin Wen, Drexel View the Presentation PDF icon CBEI: AHU FDD in Small and Medium Sized Commercial Buildings - 2015 Peer Review More Documents & Publications Compatible and Cost-Effective Fault Diagnostic Solutions for Air Handling Unit-Variable Air Volume and Air Handling Unit-Constant Air Volume

  19. CBEI: HVAC Packages for Small and Medium Sized Commercial Buildings - 2015

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Peer Review | Department of Energy HVAC Packages for Small and Medium Sized Commercial Buildings - 2015 Peer Review CBEI: HVAC Packages for Small and Medium Sized Commercial Buildings - 2015 Peer Review Presenter: Russell Taylor, United Technologies Research Center View the Presentation PDF icon CBEI: HVAC Packages for Small and Medium Sized Commercial Buildings - 2015 Peer Review More Documents & Publications CBEI: FDD for Advanced RTUs - 2015 Peer Review CBEI: Lessons Learned from

  20. Dispersion of Cloud Droplet Size Distributions, Cloud Parameterizations and Indirect Aerosol Effects

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Dispersion of Cloud Droplet Size Distributions, Cloud Parameterizations, and Indirect Aerosol Effects P. H. Daum and Y. Liu Brookhaven National Laboratory Upton, New York Introduction Most studies of the effect of aerosols on cloud radiative properties have considered only changes in the cloud droplet concentration, neglecting changes in the spectral shape of the cloud droplet size distribution. However, it has been shown that that the spectral dispersion of the cloud droplet size distribution

  1. Tuning Pore Size to Enhance the Capacitance of Supercapacitors | U.S. DOE

    Office of Science (SC) Website

    Office of Science (SC) Tuning Pore Size to Enhance the Capacitance of Supercapacitors Energy Frontier Research Centers (EFRCs) EFRCs Home Centers Research Science Highlights Highlight Archives News & Events Publications History Contact BES Home 04.27.12 Tuning Pore Size to Enhance the Capacitance of Supercapacitors Print Text Size: A A A FeedbackShare Page Scientific Achievement Simulations of nanoporous super-capacitors confirm and help to understand the anomalous increase in

  2. Current Size and Remaining Market Potential of the U.S. Energy Service

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Company Industry | Department of Energy Current Size and Remaining Market Potential of the U.S. Energy Service Company Industry Current Size and Remaining Market Potential of the U.S. Energy Service Company Industry "This report contains information on Current Size and Remaining Market Potential of the U.S. Energy Service Company Industry, prepared for the U.S. Department of Energy Office of Energy Efficiency and Renewable Energy, Weatherization and Intergovernmental Program." PDF

  3. Size Dependence of Two-Photon Absorption in Semiconductor Quantum Dots

    Office of Scientific and Technical Information (OSTI)

    (Journal Article) | SciTech Connect Size Dependence of Two-Photon Absorption in Semiconductor Quantum Dots Citation Details In-Document Search Title: Size Dependence of Two-Photon Absorption in Semiconductor Quantum Dots Quantum confinement plays an important role in the optical properties of semiconductor quantum dots (QDs). In this work, we combine experiment and modeling to systematically investigate the size dependence of the degenerate two-photon absorption (TPA) of below-band-gap

  4. Energy Department Helps Manufacturers of Small and Mid-Size Wind Turbines

    Energy Savers [EERE]

    Meet Certification Requirements | Department of Energy Helps Manufacturers of Small and Mid-Size Wind Turbines Meet Certification Requirements Energy Department Helps Manufacturers of Small and Mid-Size Wind Turbines Meet Certification Requirements October 1, 2015 - 1:04pm Addthis Energy Department Helps Manufacturers of Small and Mid-Size Wind Turbines Meet Certification Requirements Mark Higgins Operations Supervisor, Wind & Water Power Technologies Office On October 1, the Energy

  5. Disorder and size effects on Kondo interactions and magneticcorrelations in CePt2 nanoscrystals

    SciTech Connect (OSTI)

    Chen, Y.Y.; Huang, P.H.; Ou, M.N.; Wang, C.R.; Yao, Y.D.; Lee,T.K.; Ho, M.Y.; Lawrence, J.M.; Booth, C.H.

    2006-12-12

    The evolution of the Kondo effect and magnetic correlations with size reduction in CePt{sub 2} nanoparticles (3.1-26 nm) is studied by analysis of the temperature-dependent specific heat and magnetic susceptibility. The antiferromagnetic correlations diminish with size reduction. The Kondo effect predominates at small particle size with trivalent, small Kondo temperature (T{sub K}) magnetic regions coexisting with strongly mixed valent, large T{sub K} nonmagnetic regions. We discuss the role of structural disorder, background density of states and the electronic quantum size effect on the results.

  6. The Importance of Domain Size and Purity in High-Efficiency Organic...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of Domain Size and Purity in High-Efficiency Organic Solar Cells Print The efficiency of polymerorganic photovoltaic cells hinges on excitons-electronhole pairs energized by...

  7. The Dependence of Cirrus Cloud-Property Retrievals on Size-Distributio...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    path (IWP), effective particle size (Deff), and visible extinction optical thickness (tau). During this past year we began comparing our cirrus retrieval results with aircraft...

  8. Size Dependence of the Bandgap of Plasma Synthesized Silicon Nanoparticles Through Direct Introduction of Sulfur Hexafluoride

    SciTech Connect (OSTI)

    Theingi, S.; Guan, T. Y.; Kendrick, C.; Klafehn, G.; Gorman, B. P.; Taylor, P. C.; Lusk, M. T.; Stradins, Pauls; Collins, R. T.

    2015-10-19

    Developing silicon nanoparticle (SiNP) synthesis techniques that allow for straightforward control of nanoparticle size and associated optical properties is critical to potential applications of these materials. In addition, it is, in general, hard to probe the absorption threshold in these materials due to silicon's low absorption coefficient. In this study, size is controlled through direct introduction of sulfur hexafluoride (SF6) into the dilute silane precursor of plasma synthesized SiNPs. Size reduction by nearly a factor of two with high crystallinity independent of size is demonstrated. Optical absorption spectra of the SiNPs in the vicinity of the bandgap are measured using photothermal deflection spectroscopy. Bandgap as a function of size is extracted taking into account the polydispersity of the samples. A systematic blue shift inabsorption edge due to quantum confinement in the SiNPs is observed with increasing flow of SF6. Photoluminescence (PL) spectra show a similar blue shift with size. However, a ~300 meV difference in energy between emission and absorption for all sizes suggests that PL emission involves a defect related process. While PL may allow size-induced shifts in the bandgap of SiNPs to be monitored, it cannot be relied on to give an accurate value for the bandgap as a function of size.

  9. Ultrasonic processor reduces drill-cuttings size and eliminates subsea mounds

    SciTech Connect (OSTI)

    Gaddy, D.E.

    1997-10-06

    Drill cuttings size reduction using ultrasonics eliminated a subsea clean-up and significantly reduced the environmental impact in a North Sea drilling project. Reduction in cuttings size allows for a wider areal dispersion when released into the ocean because they are held in suspension longer than larger sizes. Thus, ocean currents carry the smaller cuttings farther away from the well template, leaving a much wider footprint than larger cuttings sizes. This eliminates the pile-up of cuttings that otherwise would contaminate and harm the marine habitat.

  10. Online Monitoring Technical Basis and Analysis Framework for Emergency Diesel Generators - Interim Report for FY 2013

    SciTech Connect (OSTI)

    Binh T. Pham; Nancy J. Lybeck; Vivek Agarwal

    2012-12-01

    The Light Water Reactor Sustainability program at Idaho National Laboratory is actively conducting research to develop and demonstrate online monitoring capabilities for active components in existing nuclear power plants. Idaho National Laboratory and the Electric Power Research Institute are working jointly to implement a pilot project to apply these capabilities to emergency diesel generators and generator step-up transformers. The Electric Power Research Institute Fleet-Wide Prognostic and Health Management Software Suite will be used to implement monitoring in conjunction with utility partners: Braidwood Generating Station (owned by Exelon Corporation) for emergency diesel generators, and Shearon Harris Nuclear Generating Station (owned by Duke Energy Progress) for generator step-up transformers. This report presents monitoring techniques, fault signatures, and diagnostic and prognostic models for emergency diesel generators. Emergency diesel generators provide backup power to the nuclear power plant, allowing operation of essential equipment such as pumps in the emergency core coolant system during catastrophic events, including loss of offsite power. Technical experts from Braidwood are assisting Idaho National Laboratory and Electric Power Research Institute in identifying critical faults and defining fault signatures associated with each fault. The resulting diagnostic models will be implemented in the Fleet-Wide Prognostic and Health Management Software Suite and tested using data from Braidwood. Parallel research on generator step-up transformers was summarized in an interim report during the fourth quarter of fiscal year 2012.

  11. STOCK: Structure mapper and online coarse-graining kit for molecular simulations

    SciTech Connect (OSTI)

    Bevc, Sta; Junghans, Christoph; Praprotnik, Matej

    2015-03-15

    We present a web toolkit STructure mapper and Online Coarse-graining Kit for setting up coarse-grained molecular simulations. The kit consists of two tools: structure mapping and Boltzmann inversion tools. The aim of the first tool is to define a molecular mapping from high, e.g. all-atom, to low, i.e. coarse-grained, resolution. Using a graphical user interface it generates input files, which are compatible with standard coarse-graining packages, e.g. VOTCA and DL_CGMAP. Our second tool generates effective potentials for coarse-grained simulations preserving the structural properties, e.g. radial distribution functions, of the underlying higher resolution model. The required distribution functions can be provided by any simulation package. Simulations are performed on a local machine and only the distributions are uploaded to the server. The applicability of the toolkit is validated by mapping atomistic pentane and polyalanine molecules to a coarse-grained representation. Effective potentials are derived for systems of TIP3P (transferable intermolecular potential 3 point) water molecules and salt solution. The presented coarse-graining web toolkit is available at http://stock.cmm.ki.si.

  12. Development of an automated high temperature valveless injection system for on-line gas chromatography

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Kreisberg, N. M.; Worton, D. R.; Zhao, Y.; Isaacman, G.; Goldstein, A. H.; Hering, S. V.

    2014-07-23

    A reliable method of sample introduction is presented for on-line gas chromatography with a special application to in-situ field portable atmospheric sampling instruments. A traditional multi-port valve is replaced with a controlled pressure switching device that offers the advantage of long term reliability and stable sample transfer efficiency. An engineering design model is presented and tested that allows customizing the interface for other applications. Flow model accuracy is within measurement accuracy (1%) when parameters are tuned for an ambient detector and 15% accurate when applied to a vacuum based detector. Laboratory comparisons made between the two methods of sample introductionmore » using a thermal desorption aerosol gas chromatograph (TAG) show approximately three times greater reproducibility maintained over the equivalent of a week of continuous sampling. Field performance results for two versions of the valveless interface used in the in-situ instrument demonstrate minimal trending and a zero failure rate during field deployments ranging up to four weeks of continuous sampling. Extension of the VLI to dual collection cells is presented with less than 3% cell-to-cell carry-over.« less

  13. Development of an automated high-temperature valveless injection system for online gas chromatography

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Kreisberg, N. M.; Worton, D. R.; Zhao, Y.; Isaacman, G.; Goldstein, A. H.; Hering, S. V.

    2014-12-12

    A reliable method of sample introduction is presented for online gas chromatography with a special application to in situ field portable atmospheric sampling instruments. A traditional multi-port valve is replaced with a valveless sample introduction interface that offers the advantage of long-term reliability and stable sample transfer efficiency. An engineering design model is presented and tested that allows customizing this pressure-switching-based device for other applications. Flow model accuracy is within measurement accuracy (1%) when parameters are tuned for an ambient-pressure detector and 15% accurate when applied to a vacuum-based detector. Laboratory comparisons made between the two methods of sample introductionmore » using a thermal desorption aerosol gas chromatograph (TAG) show that the new interface has approximately 3 times greater reproducibility maintained over the equivalent of a week of continuous sampling. Field performance results for two versions of the valveless interface used in the in situ instrument demonstrate typically less than 2% week-1 response trending and a zero failure rate during field deployments ranging up to 4 weeks of continuous sampling. Extension of the valveless interface to dual collection cells is presented with less than 3% cell-to-cell carryover.« less

  14. Mode Initialization for On-line Estimation of Power System Electromechanical Modes

    SciTech Connect (OSTI)

    Zhou, Ning; Trudnowski, Daniel; Pierre, John W.

    2009-03-18

    Measurement-based mode estimation methods are utilized to estimate electromechanical modes of a power system using phasor measurement units (PMU) data. These methods need to extract a certain amount of information before they can give useable mode estimation. Traditionally, the information is gathered solely from measurement data. Priori mode information from other resources (e.g. model eigenvalue analysis, engineering knowledge) are not fully utilized. For real time application, this means that mode estimation takes time to converge. By adding a mode regularization term in the objective function, this paper proposes a mode initialization method to include priori mode information in a regularized robust recursive least squares (R3LS) algorithm for on-line mode estimation. The proposed method is tested using a simple model, a 17 machine model and is shown to be able to shorten the convergence period of the R3LS algorithm. The proposed method is also applied on the measurement data recorded right before a major power outage in the western North American Grid on August 10th 1996 to show its potential applica-tion in detecting an approaching small signal stability problem.

  15. Developing Effective Continuous On-Line Monitoring Technologies to Manage Service Degradation of Nuclear Power Plants

    SciTech Connect (OSTI)

    Meyer, Ryan M.; Ramuhalli, Pradeep; Bond, Leonard J.; Cumblidge, Stephen E.

    2011-09-30

    Recently, there has been increased interest in using prognostics (i.e, remaining useful life (RUL) prediction) for managing and mitigating aging effects in service-degraded passive nuclear power reactor components. A vital part of this philosophy is the development of tools for detecting and monitoring service-induced degradation. Experience with in-service degradation has shown that rapidly-growing cracks, including several varieties of stress corrosion cracks (SCCs), can grow through a pipe in less than one fuel outage cycle after they initiate. Periodic inspection has limited effectiveness at detecting and managing such degradation requiring a more versatile monitoring philosophy. Acoustic emission testing (AET) and guided wave ultrasonic testing (GUT) are related technologies with potential for on-line monitoring applications. However, harsh operating conditions within NPPs inhibit the widespread implementation of both technologies. For AET, another hurdle is the attenuation of passive degradation signals as they travel though large components, relegating AET to targeted applications. GUT is further hindered by the complexity of GUT signatures limiting its application to the inspection of simple components. The development of sensors that are robust and inexpensive is key to expanding the use of AET and GUT for degradation monitoring in NPPs and improving overall effectiveness. Meanwhile, the effectiveness of AET and GUT in NPPs can be enhanced through thoughtful application of tandem AET-GUT techniques.

  16. Online Monitoring Technical Basis and Analysis Framework for Large Power Transformers; Interim Report for FY 2012

    SciTech Connect (OSTI)

    Nancy J. Lybeck; Vivek Agarwal; Binh T. Pham; Heather D. Medema; Kirk Fitzgerald

    2012-09-01

    The Light Water Reactor Sustainability program at Idaho National Laboratory (INL) is actively conducting research to develop and demonstrate online monitoring (OLM) capabilities for active components in existing Nuclear Power Plants. A pilot project is currently underway to apply OLM to Generator Step-Up Transformers (GSUs) and Emergency Diesel Generators (EDGs). INL and the Electric Power Research Institute (EPRI) are working jointly to implement the pilot project. The EPRI Fleet-Wide Prognostic and Health Management (FW-PHM) Software Suite will be used to implement monitoring in conjunction with utility partners: the Shearon Harris Nuclear Generating Station (owned by Duke Energy for GSUs, and Braidwood Generating Station (owned by Exelon Corporation) for EDGs. This report presents monitoring techniques, fault signatures, and diagnostic and prognostic models for GSUs. GSUs are main transformers that are directly connected to generators, stepping up the voltage from the generator output voltage to the highest transmission voltages for supplying electricity to the transmission grid. Technical experts from Shearon Harris are assisting INL and EPRI in identifying critical faults and defining fault signatures associated with each fault. The resulting diagnostic models will be implemented in the FW-PHM Software Suite and tested using data from Shearon-Harris. Parallel research on EDGs is being conducted, and will be reported in an interim report during the first quarter of fiscal year 2013.

  17. Continuous on-line steam quality monitoring system of the Bacman Geothermal Production Field, Philippines

    SciTech Connect (OSTI)

    Solis, R.P.; Chavez, F.C.; Garcia, S.E.

    1997-12-31

    In any operating geothermal power plant, steam quality is one of the most important parameters being monitored. In the Bacon-Manito Geothermal Production Field (BGPF), an online steam quality monitoring system have been installed in two operating power plants which provides an accurate, efficient and continuous real-time data which is more responsive to the various requirements of the field operation. The system utilizes sodium as an indicator of steam purity. Sodium concentration is read by the flame photometer located at the interface after aspirating a sample of the condensed steam through a continuous condensate sampler. The condensate has been degassed through a condensate-NCG separator. The flame photometer analog signal is then converted by a voltage-to-current converter/transmitter and relayed to the processor which is located at the control center through electrical cable to give a digital sodium concentration read-out at the control panel. The system features a high and high-high sodium level alarm, a continuous strip-chart recorder and a central computer for data capture, retrieval, and processing for further interpretation. Safety devices, such as the flame-off indicator at the control center and the automatic fuel cut-off device along the fuel line, are incorporated in the system.

  18. Incremental online object learning in a vehicular radar-vision fusion framework

    SciTech Connect (OSTI)

    Ji, Zhengping; Weng, Juyang; Luciw, Matthew; Zeng, Shuqing

    2010-10-19

    In this paper, we propose an object learning system that incorporates sensory information from an automotive radar system and a video camera. The radar system provides a coarse attention for the focus of visual analysis on relatively small areas within the image plane. The attended visual areas are coded and learned by a 3-layer neural network utilizing what is called in-place learning, where every neuron is responsible for the learning of its own signal processing characteristics within its connected network environment, through inhibitory and excitatory connections with other neurons. The modeled bottom-up, lateral, and top-down connections in the network enable sensory sparse coding, unsupervised learning and supervised learning to occur concurrently. The presented work is applied to learn two types of encountered objects in multiple outdoor driving settings. Cross validation results show the overall recognition accuracy above 95% for the radar-attended window images. In comparison with the uncoded representation and purely unsupervised learning (without top-down connection), the proposed network improves the recognition rate by 15.93% and 6.35% respectively. The proposed system is also compared with other learning algorithms favorably. The result indicates that our learning system is the only one to fit all the challenging criteria for the development of an incremental and online object learning system.

  19. Online, In-Situ Monitoring Combustion Turbines Using Wireless Passive Ceramic Sensors

    SciTech Connect (OSTI)

    Gong, Xun; An, Linan; Xu, Chengying

    2013-06-30

    The overall objective of this project is to develop high-temperature wireless passive ceramic sensors for online, real-time monitoring combustion turbines. During this project period, we have successfully demonstrated temperature sensors up to 1300{degrees}C and pressure sensors up to 800oC. The temperature sensor is based on a high-Q-factor dielectric resonator and the pressure sensor utilizes the evanescent-mode cavity to realize a pressure-sensitive high-Q-factor resonator. Both sensors are efficiently integrated with a compact antenna. These sensors are wirelessly interrogated. The resonant frequency change corresponding to either temperature or pressure can be identified using a time-domain gating technique. The sensors realized in this project can survive harsh environments characterized by high temperatures (>1000{degrees}C) and corrosive gases, owing to the excellent material properties of polymer-derived ceramics (PDCs) developed at University of Central Florida. It is anticipated that this work will significantly advance the capability of high-temperature sensor technologies and be of a great benefit to turbine industry and their customers.

  20. Field Trial of LANL On-Line Advanced Enrichment Monitor for UF6 GCEP

    SciTech Connect (OSTI)

    Ianakiev, Kiril D.; Lombardi, Marcie; MacArthur, Duncan W.; Parker, Robert F.; Smith, Morag K.; Keller, Clifford; Friend, Peter; Dunford, Andrew

    2012-07-13

    The outline of this presentation is: (1) Technology basis of on-line enrichment monitoring; (2) Timescale of trial; (3) Description of installed equipment; (4) Photographs; (5) Results; (6) Possible further development; and (7) Conclusions. Summary of the good things about the Advanced Enrichment Monitor (AEM) performance is: (1) High accuracy - normally better than 1% relative, (2) Active system as accurate as passive system, (3) Fast and accurate detection of enrichment changes, (4) Physics is well understood, (5) Elegant method for capturing pressure signal, and (6) Data capture is automatic, low cost and fast. A couple of negative things are: (1) Some jumps in measured passive enrichment - of around +2% relative (due to clock errors?); and (2) Data handling and evaluation is off-line, expensive and very slow. Conclusions are: (1) LANL AEM is being tested on E23 plant at Capenhurst; (2) The trial is going very well; (3) AEM could detect production of HEU at potentially much lower cost than existing CEMO; (4) AEM can measure {sup 235}U assay accurately; (5) Active system using X-Ray source would avoid need for pressure measurement; (6) Substantial work lies ahead to go from current prototype to a production instrument.

  1. STOCK: Structure mapper and online coarse-graining kit for molecular simulations

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Bevc, Staš; Junghans, Christoph; Praprotnik, Matej

    2015-03-15

    We present a web toolkit STructure mapper and Online Coarse-graining Kit for setting up coarse-grained molecular simulations. The kit consists of two tools: structure mapping and Boltzmann inversion tools. The aim of the first tool is to define a molecular mapping from high, e.g. all-atom, to low, i.e. coarse-grained, resolution. Using a graphical user interface it generates input files, which are compatible with standard coarse-graining packages, e.g. VOTCA and DL_CGMAP. Our second tool generates effective potentials for coarse-grained simulations preserving the structural properties, e.g. radial distribution functions, of the underlying higher resolution model. The required distribution functions can be providedmore » by any simulation package. Simulations are performed on a local machine and only the distributions are uploaded to the server. The applicability of the toolkit is validated by mapping atomistic pentane and polyalanine molecules to a coarse-grained representation. Effective potentials are derived for systems of TIP3P (transferable intermolecular potential 3 point) water molecules and salt solution. The presented coarse-graining web toolkit is available at http://stock.cmm.ki.si.« less

  2. Online tuning of impedance matching circuit for long pulse inductively coupled plasma source operationAn alternate approach

    SciTech Connect (OSTI)

    Sudhir, Dass; Bandyopadhyay, M. Chakraborty, A.; Kraus, W.; Gahlaut, A.; Bansal, G.

    2014-01-15

    Impedance matching circuit between radio frequency (RF) generator and the plasma load, placed between them, determines the RF power transfer from RF generator to the plasma load. The impedance of plasma load depends on the plasma parameters through skin depth and plasma conductivity or resistivity. Therefore, for long pulse operation of inductively coupled plasmas, particularly for high power (?100 kW or more) where plasma load condition may vary due to different reasons (e.g., pressure, power, and thermal), online tuning of impedance matching circuit is necessary through feedback. In fusion grade ion source operation, such online methodology through feedback is not present but offline remote tuning by adjusting the matching circuit capacitors and tuning the driving frequency of the RF generator between the ion source operation pulses is envisaged. The present model is an approach for remote impedance tuning methodology for long pulse operation and corresponding online impedance matching algorithm based on RF coil antenna current measurement or coil antenna calorimetric measurement may be useful in this regard.

  3. Quantitative Reflectance Spectra of Solid Powders as a Function of Particle Size

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Myers, Tanya L.; Brauer, Carolyn S.; Su, Yin-Fong; Blake, Thomas A.; Tonkyn, Russell G.; Ertel, Alyssa B.; Johnson, Timothy J.; Richardson, Robert L.

    2015-05-19

    We have recently developed vetted methods for obtaining quantitative infrared directional-hemispherical reflectance spectra using a commercial integrating sphere. In this paper, the effects of particle size on the spectral properties are analyzed for several samples such as ammonium sulfate, calcium carbonate, and sodium sulfate as well as one organic compound, lactose. We prepared multiple size fractions for each sample and confirmed the mean sizes using optical microscopy. Most species displayed a wide range of spectral behavior depending on the mean particle size. General trends of reflectance vs. particle size are observed such as increased albedo for smaller particles: for mostmorewavelengths, the reflectivity drops with increased size, sometimes displaying a factor of 4 or more drop in reflectivity along with a loss of spectral contrast. In the longwave infrared, several species with symmetric anions or cations exhibited reststrahlen features whose amplitude was nearly invariant with particle size, at least for intermediate- and large-sized sample fractions; that is, > ~150 microns. Trends of other types of bands (Christiansen minima, transparency features) are also investigated as well as quantitative analysis of the observed relationship between reflectance vs. particle diameter.less

  4. Grain size dependent mechanical properties of nanocrystalline diamond films grown by hot-filament CVD

    SciTech Connect (OSTI)

    Wiora, M; Bruehne, K; Floeter, A; Gluche, P; Willey, T M; Kucheyev, S O; Van Buuren, A W; Hamza, A V; Biener, J; Fecht, H

    2008-08-01

    Nanocrystalline diamond (NCD) films with a thickness of {approx}6 {micro}m and with average grain sizes ranging from 60 to 9 nm were deposited on silicon wafers using a hot-filament chemical vapor deposition (HFCVD) process. These samples were then characterized with the goal to identify correlations between grain size, chemical composition and mechanical properties. The characterization reveals that our films are phase pure and exhibit a relatively smooth surface morphology. The levels of sp{sup 2}-bonded carbon and hydrogen impurities are low, and showed a systematic variation with the grain size. The hydrogen content increases with decreasing grain size, whereas the sp{sup 2} carbon content decreases with decreasing grain size. The material is weaker than single crystalline diamond, and both stiffness and hardness decrease with decreasing grain size. These trends suggest gradual changes of the nature of the grain boundaries, from graphitic in the case of the 60 nm grain size material to hydrogen terminated sp{sup 3} carbon for the 9 nm grain size material. The films exhibit low levels of internal stress and freestanding structures with a length of several centimeters could be fabricated without noticeable bending.

  5. Preparation of 1,3,5-triamino-2,4,6-trinitrobenzene of submicron particle size

    DOE Patents [OSTI]

    Rigdon, Lester P. (Livermore, CA); Moody, Gordon L. (Tracy, CA); McGuire, Raymond R. (Brentwood, CA)

    2001-01-01

    A method is disclosed for the preparation of very small particle size, relatively pure 1,3,5-triamino-2,4,6-trinitrobenzene (TATB). Particles of TATB prepared according to the disclosed method are of submicron size and have a surface area in the range from about 3.8 to 27 square meters per gram.

  6. Preparation of 1,3,5-triamo-2,4,6-trinitrobenzene of submicron particle size

    DOE Patents [OSTI]

    Rigdon, Lester P. (Livermore, CA); Moody, Gordon L. (Tracy, CA); McGuire, Raymond R. (Brentwood, CA)

    2001-05-01

    A method is disclosed for the preparation of very small particle size, relatively pure 1,3,5-triamino-2,4,6-trinitrobenzene (TATB). Particles of TATB prepared according to the disclosed method are of submicron size and have a surface area in the range from about 3.8 to 27 square meters per gram.

  7. Morphological changes in ultrafast laser ablation plumes with varying spot size

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Harilal, S. S.; Diwakar, P. K.; Polek, M. P.; Phillips, M. C.

    2015-06-04

    We investigated the role of spot size on plume morphology during ultrafast laser ablation of metal targets. Our results show that the spatial features of fs LA plumes are strongly dependent on the focal spot size. Two-dimensional self-emission images showed that the shape of the ultrafast laser ablation plumes changes from spherical to cylindrical with an increasing spot size from 100 to 600 ?m. The changes in plume morphology and internal structures are related to ion emission dynamics from the plasma, where broader angular ion distribution and faster ions are noticed for the smallest spot size used. The present resultsmoreclearly show that the morphological changes in the plume with spot size are independent of laser pulse width.less

  8. Final Technical Report Recovery Act: Online Nonintrusive Condition Monitoring and Fault Detection for Wind Turbines

    SciTech Connect (OSTI)

    Wei Qiao

    2012-05-29

    The penetration of wind power has increased greatly over the last decade in the United States and across the world. The U.S. wind power industry installed 1,118 MW of new capacity in the first quarter of 2011 alone and entered the second quarter with another 5,600 MW under construction. By 2030, wind energy is expected to provide 20% of the U.S. electricity needs. As the number of wind turbines continues to grow, the need for effective condition monitoring and fault detection (CMFD) systems becomes increasingly important [3]. Online CMFD is an effective means of not only improving the reliability, capacity factor, and lifetime, but it also reduces the downtime, energy loss, and operation and maintenance (O&M) of wind turbines. The goal of this project is to develop novel online nonintrusive CMFD technologies for wind turbines. The proposed technologies use only the current measurements that have been used by the control and protection system of a wind turbine generator (WTG); no additional sensors or data acquisition devices are needed. Current signals are reliable and easily accessible from the ground without intruding on the wind turbine generators (WTGs) that are situated on high towers and installed in remote areas. Therefore, current-based CMFD techniques have great economic benefits and the potential to be adopted by the wind energy industry. Specifically, the following objectives and results have been achieved in this project: (1) Analyzed the effects of faults in a WTG on the generator currents of the WTG operating at variable rotating speed conditions from the perspective of amplitude and frequency modulations of the current measurements; (2) Developed effective amplitude and frequency demodulation methods for appropriate signal conditioning of the current measurements to improve the accuracy and reliability of wind turbine CMFD; (3) Developed a 1P-invariant power spectrum density (PSD) method for effective signature extraction of wind turbine faults with characteristic frequencies in the current or current demodulated signals, where 1P stands for the shaft rotating frequency of a WTG; (4) Developed a wavelet filter for effective signature extraction of wind turbine faults without characteristic frequencies in the current or current demodulated signals; (5) Developed an effective adaptive noise cancellation method as an alternative to the wavelet filter method for signature extraction of wind turbine faults without characteristic frequencies in the current or current demodulated signals; (6) Developed a statistical analysis-based impulse detection method for effective fault signature extraction and evaluation of WTGs based on the 1P-invariant PSD of the current or current demodulated signals; (7) Validated the proposed current-based wind turbine CMFD technologies through extensive computer simulations and experiments for small direct-drive WTGs without gearboxes; and (8) Showed, through extensive experiments for small direct-drive WTGs, that the performance of the proposed current-based wind turbine CMFD technologies is comparable to traditional vibration-based methods. The proposed technologies have been successfully applied for detection of major failures in blades, shafts, bearings, and generators of small direct-drive WTGs. The proposed technologies can be easily integrated into existing wind turbine control, protection, and monitoring systems and can be implemented remotely from the wind turbines being monitored. The proposed technologies provide an alternative to vibration-sensor-based CMFD. This will reduce the cost and hardware complexity of wind turbine CMFD systems. The proposed technologies can also be combined with vibration-sensor-based methods to improve the accuracy and reliability of wind turbine CMFD systems. When there are problems with sensors, the proposed technologies will ensure proper CMFD for the wind turbines, including their sensing systems. In conclusion, the proposed technologies offer an effective means to achieve condition-based smart maintenance for wind turbines and have a gre

  9. Report from the Light Water Reactor Sustainability Workshop on On-Line Monitoring Technologies

    SciTech Connect (OSTI)

    Thomas Baldwin; Magdy Tawfik; Leonard Bond

    2010-06-01

    In support of expanding the use of nuclear power, interest is growing in methods of determining the feasibility of longer term operation for the U.S. fleet of nuclear power plants, particularly operation beyond 60 years. To help establish the scientific and technical basis for such longer term operation, the DOE-NE has established a research and development (R&D) objective. This objective seeks to develop technologies and other solutions that can improve the reliability, sustain the safety, and extend the life of current reactors. The Light Water Reactor Sustainability (LWRS) Program, which addresses the needs of this objective, is being developed in collaboration with industry R&D programs to provide the technical foundations for licensing and managing the long-term, safe, and economical operation of nuclear power plants. The LWRS Program focus is on longer-term and higher-risk/reward research that contributes to the national policy objectives of energy and environmental security. In moving to identify priorities and plan activities, the Light Water Reactor Sustainability Workshop on On-Line Monitoring (OLM) Technologies was held June 1012, 2010, in Seattle, Washington. The workshop was run to enable industry stakeholders and researchers to identify the nuclear industry needs in the areas of future OLM technologies and corresponding technology gaps and research capabilities. It also sought to identify approaches for collaboration that would be able to bridge or fill the technology gaps. This report is the meeting proceedings, documenting the presentations and discussions of the workshop and is intended to serve as a basis for a plan which is under development that will enable the I&C research pathway to achieve its goals. Benefits to the nuclear industry accruing from On Line Monitoring Technology cannot be ignored. Information gathered thus far has contributed significantly to the Department of Energys Light Water Reactor Sustainability Program. DOE has shown great interest in supplying necessary support to help this industry to move forward as indicated by the recent workshop conducted in support of this interest. The Light Water Reactor Sustainability Workshop on On-Line Monitoring Technologies provided an opportunity for industry stakeholders and researchers to gather in order to collectively identify the nuclear industrys needs in the areas of OLM technologies including diagnostics, prognostics, and RUL. Additionally, the workshop provided the opportunity for attendees to pinpoint technology gaps and research capabilities along with the fostering of future collaboration in order to bridge the gaps identified. Attendees concluded that a research and development program is critical to future nuclear operations. Program activities would result in enhancing and modernizing the critical capabilities of instrumentation, information, and control technologies for long-term nuclear asset operation and management. Adopting a comprehensive On Line Monitoring research program intends to: Develop national capabilities at the university and laboratory level Create or renew infrastructure needed for long-term research, education, and testing Support development and testing of needed I&C technologies Improve understanding of, confidence in, and decisions to employ these new technologies in the nuclear power sector and achieve successful licensing and deployment.

  10. A Robust Infrastructure Design for Gas Centrifuge Enrichment Plant Unattended Online Enrichment Monitoring

    SciTech Connect (OSTI)

    Younkin, James R; Rowe, Nathan C; Garner, James R

    2012-01-01

    An online enrichment monitor (OLEM) is being developed to continuously measure the relative isotopic composition of UF6 in the unit header pipes of a gas centrifuge enrichment plant (GCEP). From a safeguards perspective, OLEM will provide early detection of a facility being misused for production of highly enriched uranium. OLEM may also reduce the number of samples collected for destructive assay and if coupled with load cell monitoring can provide isotope mass balance verification. The OLEM design includes power and network connections for continuous monitoring of the UF6 enrichment and state of health of the instrument. Monitoring the enrichment on all header pipes at a typical GCEP could require OLEM detectors on each of the product, tails, and feed header pipes. If there are eight process units, up to 24 detectors may be required at a modern GCEP. Distant locations, harsh industrial environments, and safeguards continuity of knowledge requirements all place certain demands on the network robustness and power reliability. This paper describes the infrastructure and architecture of an OLEM system based on OLEM collection nodes on the unit header pipes and power and network support nodes for groupings of the collection nodes. A redundant, self-healing communications network, distributed backup power, and a secure communications methodology. Two candidate technologies being considered for secure communications are the Object Linking and Embedding for Process Control Unified Architecture cross-platform, service-oriented architecture model for process control communications and the emerging IAEA Real-time And INtegrated STream-Oriented Remote Monitoring (RAINSTORM) framework to provide the common secure communication infrastructure for remote, unattended monitoring systems. The proposed infrastructure design offers modular, commercial components, plug-and-play extensibility for GCEP deployments, and is intended to meet the guidelines and requirements for unattended and remotely monitored safeguards systems.

  11. Random Acts of Kindness: Helping Others Save Energy

    Broader source: Energy.gov [DOE]

    A few years ago, my family gathered in Mississippi for a funeral. While we were there, we undertook the renovation of a living area and found it was quick and easy to make some energy efficient...

  12. Three Companies Awarded Contracts for Royalty-in-Kind Exchanges...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy (DOE) today awarded contracts to Shell Trading Company, Sunoco Logistics, and BP North America for exchange of 12.3 million barrels of royalty oil produced...

  13. First-of-a-kind supercomputer at Lawrence Livermore available...

    National Nuclear Security Administration (NNSA)

    at Lawrence Livermore National Laboratory, is available to industry collaborators to test big data technologies, architectures and applications. Developed by a partnership of Cray,...

  14. First-of-its-Kind Carbon Capture and Conversion Demonstration...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The SkyMine technology was designed to retrofit existing coal-burning facilities, but also has potential applications for heavy industry, including cement, glass, steel and natural ...

  15. Pennsylvania: Window Technology First of Its Kind for Commercial...

    Office of Environmental Management (EM)

    more than 20 billion gallons of gasoline. In support of DOE's goal to reduce energy consumption in buildings by 50% by 2030, EERE utilized 1.3 million of Recovery Act funding to...

  16. Researchers Discover a New Kind of Neutrino Transformation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    March 8, 2012 Linda Vu, lvu@lbl.gov, +1 510 495 2402 Daya Bay Neutrino Facility in China. Photo by: Roy Kaltschmidt, Lawrence Berkeley National Laboratory. Neutrinos, the...

  17. Pyroelectric response of ferroelectric nanowires: Size effect and electric energy harvesting

    SciTech Connect (OSTI)

    Morozovska, A. N.; Eliseev, E. A.; Svechnikov, S. V.; Kalinin, Sergei V

    2010-01-01

    The size effect on pyroelectric response of ferroelectric nanowires is analyzed. The pyroelectric coefficient strongly increases with the wire radius decrease and diverges at critical radius Rcr corresponding to the size-driven transition into paraelectric phase. Size-driven enhancement of pyroelectric coupling leads to the giant pyroelectric current and voltage generation by the polarized ferroelectric nanoparticles in response to the temperature fluctuation. The maximum efficiency of the pyroelectric energy harvesting and bolometric detection is derived, and is shown to approach the Carnot limit for low temperatures.

  18. Increased InAs quantum dot size and density using bismuth as a surfactant

    SciTech Connect (OSTI)

    Dasika, Vaishno D.; Krivoy, E. M.; Nair, H. P.; Maddox, S. J.; Park, K. W.; Yu, E. T.; Bank, S. R.; Jung, D.; Lee, M. L.

    2014-12-22

    We have investigated the growth of self-assembled InAs quantum dots using bismuth as a surfactant to control the dot size and density. We find that the bismuth surfactant increases the quantum dot density, size, and uniformity, enabling the extension of the emission wavelength with increasing InAs deposition without a concomitant reduction in dot density. We show that these effects are due to bismuth acting as a reactive surfactant to kinetically suppress the surface adatom mobility. This mechanism for controlling quantum dot density and size has the potential to extend the operating wavelength and enhance the performance of various optoelectronic devices.

  19. Finite-size effects on the radiative energy loss of a fast parton in hot

    Office of Scientific and Technical Information (OSTI)

    and dense strongly interacting matter (Journal Article) | SciTech Connect Finite-size effects on the radiative energy loss of a fast parton in hot and dense strongly interacting matter Citation Details In-Document Search Title: Finite-size effects on the radiative energy loss of a fast parton in hot and dense strongly interacting matter We consider finite-size effects on the radiative energy loss of a fast parton moving in a finite-temperature, strongly interacting medium, using the

  20. Microsoft Word - GRS Review_OMB White Paper - Real Property Right-sizing

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Carbon Reduction August 7 2009 _2_.docx | Department of Energy GRS Review_OMB White Paper - Real Property Right-sizing and Carbon Reduction August 7 2009 _2_.docx Microsoft Word - GRS Review_OMB White Paper - Real Property Right-sizing and Carbon Reduction August 7 2009 _2_.docx PDF icon Microsoft Word - GRS Review_OMB White Paper - Real Property Right-sizing and Carbon Reduction August 7 2009 _2_.docx More Documents & Publications Executive Branch Management Scorecard 2013 guidance

  1. Plasma size and power scaling of ion temperature gradient driven turbulence

    SciTech Connect (OSTI)

    Idomura, Yasuhiro; Nakata, Motoki

    2014-02-15

    The transport scaling with respect to plasma size and heating power is studied for ion temperature gradient driven turbulence using a fixed-flux full-f gyrokinetic Eulerian code. It is found that when heating power is scaled with plasma size, the ion heat diffusivity increases with plasma size in a local limit regime, where fixed-gradient ?f simulations predict a gyro-Bohm scaling. In the local limit regime, the transport scaling is strongly affected by the stiffness of ion temperature profiles, which is related to the power degradation of confinement.

  2. Size-Dependent Pressure-Induced Amorphization in Nanoscale TiO{sub 2}

    Office of Scientific and Technical Information (OSTI)

    (Journal Article) | SciTech Connect Size-Dependent Pressure-Induced Amorphization in Nanoscale TiO{sub 2} Citation Details In-Document Search Title: Size-Dependent Pressure-Induced Amorphization in Nanoscale TiO{sub 2} We investigated the size-dependent high-pressure phase transition behavior of nanocrystalline anatase TiO{sub 2} with synchrotron x-ray diffraction and Raman spectroscopy to 45 GPa at ambient temperature. Pressure-induced amorphization results in a high-density amorphous (HDA)

  3. Particle size effect of hydrogen-induced lattice expansion of palladium nanoclusters.

    SciTech Connect (OSTI)

    Ingham, B.; Toney, M. F.; Hendy, S. C.; Cox, T.; Fong, D. D.; Eastman, J. A.; Fuoss, P. H.; Stevens, K. J.; Lassesson, A.; Brown, S. A.; Ryan, M. P.; Materials Science Division; Industrial Research Ltd.; Stanford Synchrotron Radiation Lab.; Victoria Univ. of Wellington; Quest Reliability Ltd.; Univ. of Canterbury; Imperial Coll.

    2008-12-01

    In situ synchrotron x-ray diffraction experiments on bare palladium nanoclusters prepared by inert-gas aggregation and size selected (1.7-6.0 nm) show significant changes in lattice parameter upon hydrogen loading and a narrowing of the miscibility gap, as the cluster size decreases. The results show that the miscibility gap is open for all cluster sizes studied, in contrast to previous literature results from surfactant-encapsulated palladium clusters. We interpret these results by showing that the nature of the surface is critical in the hydrogenation behavior of the nanoclusters.

  4. Particle Size Effect of Hydrogen-Induced Lattice Expansion of Palladium Nanoclusters

    SciTech Connect (OSTI)

    Ingham, B.; Toney, M.F.; Hendy, S.C.; Cox, T.; Fong, D.D.; Eastman, J.A.; Fuoss, P.H.; Stevens, K.J.; Lassesson, A.; Brown, S.A.; Ryan, M.P.

    2009-05-18

    In situ synchrotron x-ray diffraction experiments on bare palladium nanoclusters prepared by inert-gas aggregation and size selected (1.7-6.0 nm) show significant changes in lattice parameter upon hydrogen loading and a narrowing of the miscibility gap, as the cluster size decreases. The results show that the miscibility gap is open for all cluster sizes studied, in contrast to previous literature results from surfactant-encapsulated palladium clusters. We interpret these results by showing that the nature of the surface is critical in the hydrogenation behavior of the nanoclusters.

  5. Demonstration of a Novel Synchrophasor-based Situational Awareness System: Wide Area Power System Visualization, On-line Event Replay and Early Warning of Grid Problems

    SciTech Connect (OSTI)

    Rosso, A.

    2012-12-31

    Since the large North Eastern power system blackout on August 14, 2003, U.S. electric utilities have spent lot of effort on preventing power system cascading outages. Two of the main causes of the August 14, 2003 blackout were inadequate situational awareness and inadequate operator training In addition to the enhancements of the infrastructure of the interconnected power systems, more research and development of advanced power system applications are required for improving the wide-area security monitoring, operation and planning in order to prevent large- scale cascading outages of interconnected power systems. It is critically important for improving the wide-area situation awareness of the operators or operational engineers and regional reliability coordinators of large interconnected systems. With the installation of large number of phasor measurement units (PMU) and the related communication infrastructure, it will be possible to improve the operators’ situation awareness and to quickly identify the sequence of events during a large system disturbance for the post-event analysis using the real-time or historical synchrophasor data. The purpose of this project was to develop and demonstrate a novel synchrophasor-based comprehensive situational awareness system for control centers of power transmission systems. The developed system named WASA (Wide Area Situation Awareness) is intended to improve situational awareness at control centers of the power system operators and regional reliability coordinators. It consists of following main software modules: • Wide-area visualizations of real-time frequency, voltage, and phase angle measurements and their contour displays for security monitoring. • Online detection and location of a major event (location, time, size, and type, such as generator or line outage). • Near-real-time event replay (in seconds) after a major event occurs. • Early warning of potential wide-area stability problems. The system has been deployed and demonstrated at the Tennessee Valley Authority (TVA) and ISO New England system using real-time synchrophasor data from openPDC. Apart from the software product, the outcome of this project consists of a set of technical reports and papers describing the mathematical foundations and computational approaches of different tools and modules, implementation issues and considerations, lessons learned, and the results of lidation processes.

  6. Phosphorus removal from slow-cooled steelmaking slags: Grain size determination and liberation studies

    SciTech Connect (OSTI)

    Fregeau-Wu, E.; Iwasaki, I.

    1995-07-01

    The major obstacle in recycling steelmaking slags to the blast furnace is their phosphorus content. Removal of the phosphorus, which is primarily associated with the silicate and phosphate phases, would allow for greater recycle of these slags for their iron, manganese, and lime contents. Calculations show that separation of the silicates from the oxide phases would remove nearly 90% of the phosphorus from the slag. The variable grain size of the as-received slag made liberation by fine grinding difficult. Therefore, slow-cooling experiments were undertaken to improve the grain size distribution. The grain size distributions were determined using in-situ image analysis. The samples were ground to their apparent liberation size and high gradient magnetic separation was used to separate the magnetic oxides from the nonmagnetic silicates and phosphates. Liberation analysis and modeling was performed on selected separation products for discussion of benefication characteristics.

  7. The Effects of Transient Emotional State and Workload on Size Scaling in Perspective Displays

    SciTech Connect (OSTI)

    Tuan Q. Tran; Kimberly R. Raddatz

    2006-10-01

    Previous research has been devoted to the study of perceptual (e.g., number of depth cues) and cognitive (e.g., instructional set) factors that influence veridical size perception in perspective displays. However, considering that perspective displays have utility in high workload environments that often induce high arousal (e.g., aircraft cockpits), the present study sought to examine the effect of observers emotional state on the ability to perceive and judge veridical size. Within a dual-task paradigm, observers ability to make accurate size judgments was examined under conditions of induced emotional state (positive, negative, neutral) and high and low workload. Results showed that participants in both positive and negative induced emotional states were slower to make accurate size judgments than those not under induced emotional arousal. Results suggest that emotional state is an important factor that influences visual performance on perspective displays and is worthy of further study.

  8. Current Size and Remaining Market Potential of the U.S. Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The study analyzes the size, growth and trends in the U.S. energy service company (ESCO) ... Company (ESCO) Industry and Market Trends Speaker List for EE Forum Breakout ...

  9. Effect of A-site cation size mismatch on charge ordering behavior...

    Office of Scientific and Technical Information (OSTI)

    The schematic models are proposed for the incommensurate CO modulation in the samples with size mismatch sigmasup 2le0.003. The disappearance of the CO transition in the ...

  10. Cooperative storage of shared files in a parallel computing system with dynamic block size

    DOE Patents [OSTI]

    Bent, John M.; Faibish, Sorin; Grider, Gary

    2015-11-10

    Improved techniques are provided for parallel writing of data to a shared object in a parallel computing system. A method is provided for storing data generated by a plurality of parallel processes to a shared object in a parallel computing system. The method is performed by at least one of the processes and comprises: dynamically determining a block size for storing the data; exchanging a determined amount of the data with at least one additional process to achieve a block of the data having the dynamically determined block size; and writing the block of the data having the dynamically determined block size to a file system. The determined block size comprises, e.g., a total amount of the data to be stored divided by the number of parallel processes. The file system comprises, for example, a log structured virtual parallel file system, such as a Parallel Log-Structured File System (PLFS).

  11. Geek-Up[6.24.11]: Dust-sized 'Dragonfly' Device and Tiny Microvalves

    Broader source: Energy.gov [DOE]

    A dust-size "dragonfly-inspired" device -- which won a Sandia Lab design contest -- may ultimately enable the creation of tiny microvalves for experiments in biological research laboratories and medical facilities.

  12. Colorado - C.R.S. 42-4-510, Permits for Excess Size and Weight...

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: Colorado - C.R.S. 42-4-510, Permits for Excess Size and WeightLegal Abstract Statute regulating...

  13. Colorado - C.R.S. 42-4-510 (3), Permits for Excess Size and Weight...

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: Colorado - C.R.S. 42-4-510 (3), Permits for Excess Size and WeightLegal Abstract Statute outlining...

  14. Finite-size effects on the radiative energy loss of a fast parton...

    Office of Scientific and Technical Information (OSTI)

    This is done by introducing the concept of a radiation rate in the presence of finite-size effects. This effectively extends the finite-temperature approach of Arnold, Moore, and ...

  15. Title 43 CFR 3206.12 What are the Minimum and Maximum Lease Sizes...

    Open Energy Info (EERE)

    .12 What are the Minimum and Maximum Lease Sizes? Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- Federal RegulationFederal Regulation: Title 43...

  16. Effect on the Pore-Size Dependence of an Organic Electrolyte Supercapacitor

    SciTech Connect (OSTI)

    Jiang, Deen; Jin, Zhehui; Henderson, Douglous; Wu, Jianzhong

    2012-01-01

    Organic electrolytes such as tetraethylammonium tetrafluoroborate dissolved in acetonitrile (TEA-BF{sub 4}/ACN) are widely used in commercial supercapacitors and academic research, but conflicting experimental results have been reported regarding the dependence of surface-area-normalized capacitance on the pore size. Here we show from a classical density functional theory the dependence of capacitance on the pore size from 0.5 to 3.0 nm for a model TEA-BF{sub 4}/ACN electrolyte. We find that the capacitance-pore size curve becomes roughly flat after the first peak around the ion diameter, and the peak capacitance is not significantly higher than the large-pore average. We attribute the invariance of capacitance with the pore size to the formation of an electric double-layer structure that consists of counterions and highly organized solvent molecules. This work highlights the role of the solvent molecules in modulating the capacitance and reconciles apparently conflicting experimental reports.

  17. Building a Community Infrastructure for Scalable On-Line Performance Analysis Tools around Open|Speedshop

    SciTech Connect (OSTI)

    Miller, Barton

    2014-06-30

    Peta-scale computing environments pose significant challenges for both system and application developers and addressing them required more than simply scaling up existing tera-scale solutions. Performance analysis tools play an important role in gaining this understanding, but previous monolithic tools with fixed feature sets have not sufficed. Instead, this project worked on the design, implementation, and evaluation of a general, flexible tool infrastructure supporting the construction of performance tools as pipelines of high-quality tool building blocks. These tool building blocks provide common performance tool functionality, and are designed for scalability, lightweight data acquisition and analysis, and interoperability. For this project, we built on Open|SpeedShop, a modular and extensible open source performance analysis tool set. The design and implementation of such a general and reusable infrastructure targeted for petascale systems required us to address several challenging research issues. All components needed to be designed for scale, a task made more difficult by the need to provide general modules. The infrastructure needed to support online data aggregation to cope with the large amounts of performance and debugging data. We needed to be able to map any combination of tool components to each target architecture. And we needed to design interoperable tool APIs and workflows that were concrete enough to support the required functionality, yet provide the necessary flexibility to address a wide range of tools. A major result of this project is the ability to use this scalable infrastructure to quickly create tools that match with a machine architecture and a performance problem that needs to be understood. Another benefit is the ability for application engineers to use the highly scalable, interoperable version of Open|SpeedShop, which are reassembled from the tool building blocks into a flexible, multi-user interface set of tools. This set of tools targeted at Office of Science Leadership Class computer systems and selected Office of Science application codes. We describe the contributions made by the team at the University of Wisconsin. The project built on the efforts in Open|SpeedShop funded by DOE/NNSA and the DOE/NNSA Tri-Lab community, extended Open|Speedshop to the Office of Science Leadership Class Computing Facilities, and addressed new challenges found on these cutting edge systems. Work done under this project at Wisconsin can be divided into two categories, new algorithms and techniques for debugging, and foundation infrastructure work on our Dyninst binary analysis and instrumentation toolkits and MRNet scalability infrastructure.

  18. Analysis of fission gas release kinetics by on-line mass spectrometry

    SciTech Connect (OSTI)

    Zerega, Y.; Reynard-Carette, C.; Parrat, D.; Carette, M.; Brkic, B.; Lyoussi, A.; Bignan, G.; Janulyte, A.; Andre, J.; Pontillon, Y.; Ducros, G.; Taylor, S.

    2011-07-01

    The release of fission gas (Xe and Kr) and helium out of nuclear fuel materials in normal operation of a nuclear power reactor can constitute a strong limitation of the fuel lifetime. Moreover, radioactive isotopes of Xe and Kr contribute significantly to the global radiological source term released in the primary coolant circuit in case of accidental situations accompanied by fuel rod loss of integrity. As a consequence, fission gas release investigation is of prime importance for the nuclear fuel cycle economy, and is the driven force of numerous R and D programs. In this domain, for solving current fuel behavior understanding issues, preparing the development of new fuels (e.g. for Gen IV power systems) and for improving the modeling prediction capability, there is a marked need for innovations in the instrumentation field, mainly for: . Quantification of very low fission gas concentrations, released from fuel sample and routed in sweeping lines. Monitoring of quick gas release variations by quantification of elementary release during a short period of time. Detection of a large range of atomic masses (e.g. H{sub 2}, HT, He, CO, CO{sub 2}, Ne, Ar, Kr, Xe), together with a performing separation of isotopes for Xe and Kr elements. Coupling measurement of stable and radioactive gas isotopes, by using in parallel mass spectrometry and gamma spectrometry techniques. To fulfill these challenging needs, a common strategy for analysis equipment implementation has been set up thanks to a recently launched collaboration between the CEA and the Univ. of Provence, with the technological support of the Liverpool Univ.. It aims at developing a chronological series of mass spectrometer devices based upon mass filter and 2D/3D ion traps with Fourier transform operating mode and having increasing levels of performances to match the previous challenges for out-of pile and in-pile experiments. The final objective is to install a high performance online mass spectrometer coupled to a gamma spectrometer in the fission product laboratory of the future Jules Horowitz Material Test Reactor. An intermediate step will consist of testing first equipment on an existing experimental facility in the LECA-STAR Hot Cell Laboratory of the CEA Cadarache. This paper presents the scientific and operational stakes linked to fission gas issues, resumes the current state of art for analyzing them in nuclear facilities, then presents the skills gathered through this collaboration to overcome technological bottlenecks. Finally it describes the implementation strategy in nuclear research facilities of the CEA Cadarache. (authors)

  19. Method and apparatus for controlled size distribution of gel microspheres formed from aqueous dispersions

    DOE Patents [OSTI]

    Ryon, Allen D. (Oak Ridge, TN); Haas, Paul A. (Knoxville, TN); Vavruska, John S. (Santa Fe, NM)

    1984-01-01

    The present invention is directed to a method and apparatus for making a population of dense, closely size-controlled microspheres by sol-gel procedures wherein said microspheres are characterized by a significant percentage of said population being within a predetermined, relatively narrow size range. Microsphere populations thus provided are useful in vibratory-packed processes for nuclear fuels to be irradiated in LWR- and FBR-type nuclear reactors.

  20. Strain and particle size of palladium powders by time-of-flight neutron diffraction

    SciTech Connect (OSTI)

    Lawson, A.C.; Conant, J.W.; Talcott, C.L.; David, M.A.; Vaninetti, J.; Goldstone, J.A.; Williams, A.; Von Dreele, R.B.; Roof, R.B.; Hitterman, R.L.; Richardson, J.W. Jr.; Faber, J. Jr.

    1989-01-01

    We have determined the strain and particle size for several samples of palladium powder by time-of-flight neutron powder diffraction on two different diffractometers and by x-ray powder diffraction. The results are compared and found to be in fair agreement. The time-of-flight method gives good enough precision to reveal deficiencies in the simple models used for strain and particle size line broadening. 6 refs., 4 figs., 2 tabs.

  1. Quantum-Size-Controlled Photoelectrochemical Fabrication of Epitaxial InGaN

    Office of Scientific and Technical Information (OSTI)

    Quantum Dots (Journal Article) | SciTech Connect Quantum-Size-Controlled Photoelectrochemical Fabrication of Epitaxial InGaN Quantum Dots Citation Details In-Document Search Title: Quantum-Size-Controlled Photoelectrochemical Fabrication of Epitaxial InGaN Quantum Dots Authors: Xiao, Xiaoyin ; Fischer, Arthur J. ; Wang, George T. ; Lu, Ping ; Koleske, Daniel D. ; Coltrin, Michael E. ; Wright, Jeremy B. ; Liu, Sheng ; Brener, Igal ; Subramania, Ganesh ; Tsao, Jeffrey Y. Publication Date:

  2. Dynamical Expansion of HII Regions From Ultracompact to Compact Sizes in

    Office of Scientific and Technical Information (OSTI)

    Turbulent, Self-Gravitating Molecular Clouds (Technical Report) | SciTech Connect Technical Report: Dynamical Expansion of HII Regions From Ultracompact to Compact Sizes in Turbulent, Self-Gravitating Molecular Clouds Citation Details In-Document Search Title: Dynamical Expansion of HII Regions From Ultracompact to Compact Sizes in Turbulent, Self-Gravitating Molecular Clouds Authors: Low, Mordecai-Mark Mac ; Toraskar, Jayashree ; /Amer. Museum Natural Hist. ; Oishi, Jeffrey S. ; /Amer.

  3. Small- and Medium-Size Building Automation and Control System Needs:

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Scoping Study | Department of Energy Small- and Medium-Size Building Automation and Control System Needs: Scoping Study Small- and Medium-Size Building Automation and Control System Needs: Scoping Study Emerging Technologies Project for the 2013 Building Technologies Office's Program Peer Review PDF icon emrgtech05_brambley_040213.pdf More Documents & Publications PNNL: VOLTTRON Commercialization (CBI/ET Open Call) - 2015 Peer Review U.S. Industrial Energy Efficiency Programs CX-011262:

  4. Spontaneous radiation of a finite-size dipole emitter in hyperbolic media

    SciTech Connect (OSTI)

    Poddubny, Alexander N.; Belov, Pavel A.; Kivshar, Yuri S.

    2011-08-15

    We study the radiative decay and Purcell effect for a finite-size dipole emitter placed in a homogeneous uniaxial medium. We demonstrate that the radiative rate is strongly enhanced when the signs of the medium longitudinal and transverse dielectric constants are opposite, and that the isofrequency contour corresponds to a hyperbolic medium. We reveal that the Purcell enhancement factor remains finite even in the absence of losses and that it depends on the emitter size.

  5. Real-Time Simultaneous Measurements of Size, Density, and Composition of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Single Ultrafine Diesel Tailpipe Particles | Department of Energy Simultaneous Measurements of Size, Density, and Composition of Single Ultrafine Diesel Tailpipe Particles Real-Time Simultaneous Measurements of Size, Density, and Composition of Single Ultrafine Diesel Tailpipe Particles 2005 Diesel Engine Emissions Reduction (DEER) Conference Presentations and Posters PDF icon 2005_deer_zelenyuk.pdf More Documents & Publications Microsoft PowerPoint - 4. ORNL- deer.ppt [Read-Only]

  6. Effect of particle size and doses of olivine addition on carbon dioxide

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    sequestration during anaerobic digestion of sewage sludge at ambient and mesophilic temperatures | Argonne National Laboratory Effect of particle size and doses of olivine addition on carbon dioxide sequestration during anaerobic digestion of sewage sludge at ambient and mesophilic temperatures Title Effect of particle size and doses of olivine addition on carbon dioxide sequestration during anaerobic digestion of sewage sludge at ambient and mesophilic temperatures Publication Type Journal

  7. Measuring the Raindrop Size Distribution, ARM's Efforts at Darwin and SGP

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Measuring the Raindrop Size Distribution, ARM's Efforts at Darwin and SGP Bartholomew, Mary Jane Brookhaven National Laboratory Category: Instruments ARM has purchased two impact disdrometers for indefinite deployment. One is currently installed at the Tropical Western Pacific (TWP) Darwin facility and the other will be deployed at the central facility of the Southern Great Plains Site this spring. The disdrometers make measurements of raindrop diameter in 20 size bins over the range of 0.3 to

  8. Apparatus and method for the determination of grain size in thin films

    DOE Patents [OSTI]

    Maris, Humphrey J (Barrington, RI)

    2001-01-01

    A method for the determination of grain size in a thin film sample comprising the steps of measuring first and second changes in the optical response of the thin film, comparing the first and second changes to find the attenuation of a propagating disturbance in the film and associating the attenuation of the disturbance to the grain size of the film. The second change in optical response is time delayed from the first change in optical response.

  9. Apparatus and method for the determination of grain size in thin films

    DOE Patents [OSTI]

    Maris, Humphrey J (Barrington, RI)

    2000-01-01

    A method for the determination of grain size in a thin film sample comprising the steps of measuring first and second changes in the optical response of the thin film, comparing the first and second changes to find the attenuation of a propagating disturbance in the film and associating the attenuation of the disturbance to the grain size of the film. The second change in optical response is time delayed from the first change in optical response.

  10. The Impact of Oil Consumption Mechanisms on Diesel Exhaust Particle Size

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Distributions and Detailed Exhaust Chemical Composition | Department of Energy Oil Consumption Mechanisms on Diesel Exhaust Particle Size Distributions and Detailed Exhaust Chemical Composition The Impact of Oil Consumption Mechanisms on Diesel Exhaust Particle Size Distributions and Detailed Exhaust Chemical Composition 2003 DEER Conference Presentation: University of Wisconsin-Madison PDF icon 2003_deer_foster.pdf More Documents & Publications Mass Correlation of Engine Emissions with

  11. HVAC Right-Sizing Part 1: Calculating Loads | Department of Energy

    Energy Savers [EERE]

    HVAC Right-Sizing Part 1: Calculating Loads HVAC Right-Sizing Part 1: Calculating Loads This webinar, presented by IBACOS (a Building America Research Team) will highlight the key criteria required to create accurate heating and cooling load calculations, following the guidelines of the Air Conditioning Contractors of America (ACCA) Manual J version 8 PDF icon webinar_hvac_calculatingloads_20110428.pdf More Documents & Publications 2014-08-28 Issuance: Energy Conservation Standards for

  12. Measurements of Aerosol Charge and Size Distribution for Graphite, Gold, Palladium, and Silver Nanoparticles

    SciTech Connect (OSTI)

    Simones, Matthew P.; Gutti, Veera R.; Meyer, Ryan M.; Loyalka, Sudarshan K.

    2011-11-01

    The role of charge on aerosol evolution and hence the nuclear source term has been an issue of interest, and there is a need for both experimental techniques and modeling for quantifying this role. Our focus here is on further exploration of a tandem differential mobility analyzer (TDMA) technique to simultaneously measure both the size and charge (positive, negative and neutral) dependent aerosol distributions. We have generated graphite, gold, silver, and palladium nanoparticles (aerosol) using a spark generator. We measure the electrical mobility-size distributions for these aerosols using a TDMA, and from these data we deduce the full charge-size distributions. We observe asymmetry in the particle size distributions for negative and positive charges. This asymmetry could have a bearing on the dynamics of charged aerosols, indicating that the assumption of symmetry for size distributions of negatively and positively charged particles in source term simulations may not be always appropriate. Also, the experimental technique should find applications in measurements of aerosol rate processes that are affected by both particle charge and size (e.g. coagulation, deposition, resuspension), and hence in modeling and simulation of the nuclear source term.

  13. Low pressure shock initiation of porous HMX for two grain size distributions and two densities

    SciTech Connect (OSTI)

    Gustavsen, R.L.; Sheffield, S.A.; Alcon, R.R.

    1995-09-01

    Shock initiation measurements have been made on granular HMX (octotetramethylene tetranitrainine) for two particle size distributions and two densities. Samples were pressed to either 65% or 73% of crystal density from fine ({approx} 10 {mu}m grain size) and coarse (broad distribution of grain sizes peaking at {approx} 150 {mu}m) powders. Planar shocks of 0.2--1 GPa were generated by impacting gas gun driven projectiles on plastic targets containing the HMX. Wave profiles were measured at the input and output of the {approx} 3.9 mm thick HMX layer using electromagnetic particle velocity gauges. The initiation behavior for the two particle size distributions was very different. The coarse HMX began initiating at input pressures as low as 0.5 GPa. Transmitted wave profiles showed relatively slow reaction with most of the buildup occurring at the shock front. In contrast, the fine particle HMX did not begin to initiate at pressures below 0.9 GPa. When the fine powder did react, however, it did so much faster than the coarse HMX. These observations are consistent with commonly held ideas about bum rates being correlated to surface area, and initiation thresholds being correlated with the size and temperature of the hot spots created by shock passage. For each size, the higher density pressings were less sensitive than the lower density pressings.

  14. Using the depth-velocity-size diagram to interpret equilibrium bed configurations in river flows

    SciTech Connect (OSTI)

    Southard, J.B. (Massachusetts Institute of Technology, Cambridge, MA (USA))

    1990-05-01

    Data from flume studies that report equilibrium bed configuration as well as water temperature, flow depth, flow velocity, and sediment size were used to develop the best approximation to the relationships among the various bed phases (ripples, dunes, lower regime plane bed, upper regime plane bed, and antidunes) in a three-axis graph (depth-velocity-size diagram) with dimensionless measures of mean flow depth, mean flow velocity, and sediment size along the axis. Relationships are shown in a series of depth-velocity and velocity-size sections through the diagram. Boundaries between bed-phase stability fields are drawn as surfaces that minimize, misplacement of data points. A large subset of the data, for which reliable values of bed shear stress are reported, was also used to represent the stability relationships in a graph of dimensionless boundary shear stress against dimensionless sediment size, but with results less useful for fluvial flow interpretation. The diagram covers about one order of magnitude in flow depth. To be useful for river flows, the diagram must be extrapolated in flow depth by about one more order of magnitude, but this is not a serious problem for approximate work. The depth-velocity-size diagram permits prediction of equilibrium bed configuration in river flows when the approximate flow depth and mean flow velocity are known. Because the diagram is essentially dimensionless, the effect of water temperature (via the fluid viscosity) on the bed configuration is easily accounted for by use of the diagram.

  15. Phase Behavior and Domain Size in Sphingomyelin-Containing Lipid Bilayers

    SciTech Connect (OSTI)

    Petruzielo, Robin S [Cornell University; Heberle, Frederick A [ORNL; Drazba, Paul [ORNL; Katsaras, John [ORNL; Feigenson, Gerald [Cornell University

    2013-01-01

    Membrane raft size measurements are crucial to understanding the stability and functionality of rafts in cells. The challenge of accurately measuring raft size is evidenced by the disparate reports of domain sizes, which range from nanometers to microns for the ternary model membrane system sphingomyelin (SM)/1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC)/cholesterol (Chol). Using F rster resonance energy transfer (FRET) and differential scanning calorimetry (DSC), we established phase diagrams for porcine brain SM (bSM)/dioleoyl-sn-glycero-3-phosphocholine (DOPC)/Chol and bSM/POPC/Chol at 15 and 25 C. By combining two techniqueswith different spatial sensitivities, namely FRET and small-angle neutron scattering (SANS),we have significantly narrowed the uncertainty in domain size estimates for bSM/POPC/Chol mixtures. Compositional trends in FRET data revealed coexisting domains at 15 and 25 C for bothmixtures, while SANS measurements detected no domain formation for bSM/POPC/Chol. Together these results indicate that liquid domains in bSM/POPC/Chol are between 2 and 7 nmin radius at 25 C: that is, domains must be on the order of the 2 6 nmF rster distance of the FRET probes, but smaller than the ~7 nm minimum cluster size detectable with SANS. However, for palmitoyl SM (PSM)/POPC/Chol at a similar composition, SANS detected coexisting liquid domains. This increase in domain size upon replacing the natural SMcomponent (which consists of amixture of chain lengths) with synthetic PSM, suggests a role for SM chain length in modulating raft size in vivo.

  16. Millimeter Wave Sensor For On-Line Inspection Of Thin Sheet Dielectrics

    DOE Patents [OSTI]

    Bakhtiari, Sasan (Westmont, IL); Gopalsami, Nachappa (Naperville, IL); Raptis, Apostolos C. (Downers Grove, IL)

    1999-03-23

    A millimeter wave sensor is provided for non-destructive inspection of thin sheet dielectric materials. The millimeter wave sensor includes a Gunn diode oscillator (GDO) source generating a mill meter wave electromagnetic energy signal having a single frequency. A heater is coupled to the GDO source for stabilizing the single frequency. A small size antenna is coupled to the GDO source for transmitting the millimeter wave electromagnetic energy signal to a sample material and for receiving a reflected millimeter wave electromagnetic energy signal from the sample material. Ferrite circulator isolators coupled between the GDO source and the antenna separate the millimeter wave electromagnetic energy signal into transmitted and received electromagnetic energy signal components and a detector detects change in both amplitude and phase of the transmitted and received electromagnetic energy signal components. A millimeter wave sensor is provided for non-destructive inspection of thin sheet dielectric materials. The millimeter wave sensor includes a Gunn diode oscillator (GDO) source generating a mill meter wave electromagnetic energy signal having a single frequency. A heater is coupled to the GDO source for stabilizing the single frequency. A small size antenna is coupled to the GDO source for transmitting the millimeter wave electromagnetic energy signal to a sample material and for receiving a reflected millimeter wave electromagnetic energy signal from the sample material. Ferrite circulator isolators coupled between the GDO source and the antenna separate the millimeter wave electromagnetic energy signal into transmitted and received electromagnetic energy signal components and a detector detects change in both amplitude and phase of the transmitted and received electromagnetic energy signal components.

  17. SIZE DISTRIBUTION AND RATE OF PRODUCTION OF AIRBORNE PARTICULATE MATTER GENERATED DURING METAL CUTTING

    SciTech Connect (OSTI)

    M.A. Ebadian, Ph.D.; S.K. Dua, Ph.D., C.H.P.; Hillol Guha, Ph.D.

    2001-01-01

    During deactivation and decommissioning activities, thermal cutting tools, such as plasma torch, laser, and gasoline torch, are used to cut metals. These activities generate fumes, smoke and particulates. These airborne species of matter, called aerosols, may be inhaled if suitable respiratory protection is not used. Inhalation of the airborne metallic aerosols has been reported to cause ill health effects, such as acute respiratory syndrome and chromosome damage in lymphocytes. In the nuclear industry, metals may be contaminated with radioactive materials. Cutting these metals, as in size reduction of gloveboxes and tanks, produces high concentrations of airborne transuranic particles. Particles of the respirable size range (size < 10 {micro}m) deposit in various compartments of the respiratory tract, the fraction and the site in the respiratory tract depending on the size of the particles. The dose delivered to the respiratory tract depends on the size distribution of the airborne particulates (aerosols) and their concentration and radioactivity/toxicity. The concentration of airborne particulate matter in an environment is dependent upon the rate of their production and the ventilation rate. Thus, measuring aerosol size distribution and generation rate is important for (1) the assessment of inhalation exposures of workers, (2) the selection of respiratory protection equipment, and (3) the design of appropriate filtration systems. Size distribution of the aerosols generated during cutting of different metals by plasma torch was measured. Cutting rates of different metals, rate of generation of respirable mass, as well as the fraction of the released kerf that become respirable were determined. This report presents results of these studies. Measurements of the particles generated during cutting of metal plates with a plasma arc torch revealed the presence of particles with mass median aerodynamic diameters of particles close to 0.2 {micro}m, arising from condensation of vaporized material and subsequent rapid formation of aggregates. Particles of larger size, resulting from ejection of melted material or fragments from the cutting zone, were also observed. This study presents data regarding the metal cutting rate, particle size distribution, and their generation rate, while using different cutting tools and metals. The study shows that respirable particles constitute only a small fraction of the released kerf.

  18. Size dependent compressibility of nano-ceria: Minimum near 33 nm

    SciTech Connect (OSTI)

    Rodenbough, Philip P.; Song, Junhua; Chan, Siu-Wai; Walker, David; Clark, Simon M.; Kalkan, Bora

    2015-04-20

    We report the crystallite-size-dependency of the compressibility of nanoceria under hydrostatic pressure for a wide variety of crystallite diameters and comment on the size-based trends indicating an extremum near 33 nm. Uniform nano-crystals of ceria were synthesized by basic precipitation from cerium (III) nitrate. Size-control was achieved by adjusting mixing time and, for larger particles, a subsequent annealing temperature. The nano-crystals were characterized by transmission electron microscopy and standard ambient x-ray diffraction (XRD). Compressibility, or its reciprocal, bulk modulus, was measured with high-pressure XRD at LBL-ALS, using helium, neon, or argon as the pressure-transmitting medium for all samples. As crystallite size decreased below 100 nm, the bulk modulus first increased, and then decreased, achieving a maximum near a crystallite diameter of 33 nm. We review earlier work and examine several possible explanations for the peaking of bulk modulus at an intermediate crystallite size.

  19. Morphologically and size uniform monodisperse particles and their shape-directed self-assembly

    DOE Patents [OSTI]

    Collins, Joshua E.; Bell, Howard Y.; Ye, Xingchen; Murray, Christopher Bruce

    2015-11-17

    Monodisperse particles having: a single pure crystalline phase of a rare earth-containing lattice, a uniform three-dimensional size, and a uniform polyhedral morphology are disclosed. Due to their uniform size and shape, the monodisperse particles self assemble into superlattices. The particles may be luminescent particles such as down-converting phosphor particles and up-converting phosphors. The monodisperse particles of the invention have a rare earth-containing lattice which in one embodiment may be an yttrium-containing lattice or in another may be a lanthanide-containing lattice. The monodisperse particles may have different optical properties based on their composition, their size, and/or their morphology (or shape). Also disclosed is a combination of at least two types of monodisperse particles, where each type is a plurality of monodisperse particles having a single pure crystalline phase of a rare earth-containing lattice, a uniform three-dimensional size, and a uniform polyhedral morphology; and where the types of monodisperse particles differ from one another by composition, by size, or by morphology. In a preferred embodiment, the types of monodisperse particles have the same composition but different morphologies. Methods of making and methods of using the monodisperse particles are disclosed.

  20. Ultrashort laser ablation of bulk copper targets: Dynamics and size distribution of the generated nanoparticles

    SciTech Connect (OSTI)

    Tsakiris, N.; Gill-Comeau, M.; Lewis, L. J.; Anoop, K. K.; Ausanio, G.; Bruzzese, R.; Amoruso, S.

    2014-06-28

    We address the role of laser pulse fluence on expansion dynamics and size distribution of the nanoparticles produced by irradiating a metallic target with an ultrashort laser pulse in a vacuum, an issue for which contrasting indications are present in the literature. To this end, we have carried out a combined theoretical and experimental analysis of laser ablation of a bulk copper target with ?50 fs, 800?nm pulses, in an interval of laser fluencies going from few to several times the ablation threshold. On one side, molecular dynamics simulations, with two-temperature model, describe the decomposition of the material through the analysis of the evolution of thermodynamic trajectories in the material phase diagram, and allow estimating the size distribution of the generated nano-aggregates. On the other side, atomic force microscopy of less than one layer nanoparticles deposits on witness plates, and fast imaging of the nanoparticles broadband optical emission provide the corresponding experimental characterization. Both experimental and numerical findings agree on a size distribution characterized by a significant fraction (?90%) of small nanoparticles, and a residual part (?10%) spanning over a rather large size interval, evidencing a weak dependence of the nanoparticles sizes on the laser pulse fluence. Numerical and experimental findings show a good degree of consistency, thus suggesting that modeling can realistically support the search for experimental methods leading to an improved control over the generation of nanoparticles by ultrashort laser ablation.

  1. A NEW RECIPE FOR OBTAINING CENTRAL VOLUME DENSITIES OF PRESTELLAR CORES FROM SIZE MEASUREMENTS

    SciTech Connect (OSTI)

    Tassis, Konstantinos; Yorke, Harold W. [Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA 91109 (United States)

    2011-07-10

    We propose a simple analytical method for estimating the central volume density of prestellar molecular cloud cores from their column density profiles. Prestellar cores feature a flat central part of the column density and volume density profiles of the same size indicating the existence of a uniform-density inner region. The size of this region is set by the thermal pressure force which depends only on the central volume density and temperature of the core, and can provide a direct measurement of the central volume density. Thus, a simple length measurement can immediately yield a central density estimate independent of any dynamical model for the core and without the need for fitting. Using the radius at which the column density is 90% of the central value as an estimate of the size of the flat inner part of the column density profile yields an estimate of the central volume density within a factor of two for well-resolved cores.

  2. Nano-sized particles, processes of making, compositions and uses thereof

    DOE Patents [OSTI]

    O'Brien, Stephen; Yin, Ming

    2012-05-22

    The present invention describes methods for preparing high quality nanoparticles, i.e., metal oxide based nanoparticles of uniform size and monodispersity. The nanoparticles advantageously comprise organic alkyl chain capping groups and are stable in air and in nonpolar solvents. The methods of the invention provide a simple and reproducible procedure for forming transition metal oxide nanocrystals, with yields over 80%. The highly crystalline and monodisperse nanocrystals are obtained directly without further size selection; particle size can be easily and fractionally increased by the methods. The resulting nanoparticles can exhibit magnetic and/or optical properties. These properties result from the methods used to prepare them. Also advantageously, the nanoparticles of this invention are well suited for use in a variety of industrial applications, including cosmetic and pharmaceutical formulations and compositions.

  3. Field investigation of the relationship between battery size and PV system performance

    SciTech Connect (OSTI)

    Stevens, J.; Kratochvil, J. [Sandia National Labs., Albuquerque, NM (United States); Harrington, S. [Ktech Corp., Albuquerque, NM (United States)

    1993-07-01

    Four photovoltaic-powered lighting systems were installed in a National Forest Service campground in June of 1991. These systems have identical arrays, loads and charge controllers. The only difference was in the rated capacity of the battery bank for each system. The battery banks all use the same basic battery as a building block with the four systems utilizing either one battery, two batteries, three batteries or four batteries. The purpose of the experiment is to examine the effect of the various battery sizes on the ability of the system to charge the battery, energy available to the load, and battery lifetime. Results show an important trend in system performance concerning the impact of charge controllers on the relation between array size and battery size which results in an inability to achieve the days of battery storage originally designed for.

  4. Consideration of Grain Size Distribution in the Diffusion of Fission Gas to Grain Boundaries

    SciTech Connect (OSTI)

    Paul C. Millett; Yongfeng Zhang; Michael R. Tonks; S. B. Biner

    2013-09-01

    We analyze the accumulation of fission gas on grain boundaries in a polycrystalline microstructure with a distribution of grain sizes. The diffusion equation is solved throughout the microstructure to evolve the gas concentration in space and time. Grain boundaries are treated as infinite sinks for the gas concentration, and we monitor the cumulative gas inventory on each grain boundary throughout time. We consider two important cases: first, a uniform initial distribution of gas concentration without gas production (correlating with post-irradiation annealing), and second, a constant gas production rate with no initial gas concentration (correlating with in-reactor conditions). The results show that a single-grain-size model, such as the Booth model, over predicts the gas accumulation on grain boundaries compared with a polycrystal with a grain size distribution. Also, a considerable degree of scatter, or variability, exists in the grain boundary gas accumulation when comparing all of the grain boundaries in the microstructure.

  5. Measurement of the soot concentration and soot particle sizes in propane oxygen flames

    SciTech Connect (OSTI)

    Bockhorn, H.; Fetting, F.; Meyer, U.; Reck, R.; Wannemacher, G.

    1981-01-01

    Soot concentrations and particle sizes were measured by light scattering and probe measurements in the burnt gas region of atmospheric pressure propane-oxygen flames and propane-oxygen flames to which hydrogen or ammonia were added. The results show that the soot concentrations in propane-oxygen flames, to which hydrogen is added are lower compared to propane-oxygen flames. The decrease of soot concentration is much stronger when ammonia is added. Associated with the reduction of soot concentration is a reduction of mean particle size of the soot particles and a lower breadth of the particle size distributions. Electron micrographs of soot particles from the probe measurements showed that soot particles from flames with high soot concentrations (propane oxygen flames) are aggregates with chain or cluster structure while the structure of the particles from flames with lower soot concentration (propane oxygen flames with hydrogen or ammonia added) is more compact. 24 refs.

  6. Measurement of particle size, velocity and temperature in the plasma spray coating process

    SciTech Connect (OSTI)

    Fincke, J.R.; Swank, W.D.

    1991-01-01

    The quality and uniformity of coatings fabricated by the plasma spray process is controlled by the condition of the particles on impact. In this work a measurement technique for simultaneously obtaining particle size, velocity, and temperature is used to characterize the particle spray field. Particle size and velocity are obtained from a combination laser particle sizing system and laser Doppler velocimeter (LDV). The particle temperature is determined by a two-color pyrometer technique and the relative particle number density is derived from the data rate. The fraction of unheated or unprocessed particles which result from temperature and velocity fluctuations is also obtained. This fraction can approach 10% by mass of the total particle flow. 17 refs., 10 figs.

  7. Density-functional errors in ionization potential with increasing system size

    SciTech Connect (OSTI)

    Whittleton, Sarah R.; Sosa Vazquez, Xochitl A.; Isborn, Christine M.; Johnson, Erin R.

    2015-05-14

    This work investigates the effects of molecular size on the accuracy of density-functional ionization potentials for a set of 28 hydrocarbons, including series of alkanes, alkenes, and oligoacenes. As the system size increases, delocalization error introduces a systematic underestimation of the ionization potential, which is rationalized by considering the fractional-charge behavior of the electronic energies. The computation of the ionization potential with many density-functional approximations is not size-extensive due to excessive delocalization of the incipient positive charge. While inclusion of exact exchange reduces the observed errors, system-specific tuning of long-range corrected functionals does not generally improve accuracy. These results emphasize that good performance of a functional for small molecules is not necessarily transferable to larger systems.

  8. The effects of size reduction techniques on TCLP analysis of solidified mixed waste

    SciTech Connect (OSTI)

    Thiel, R.D.; McLaurin, A.W.; Kochen, R.L.

    1993-07-01

    The Rocky Flats Plant (RFP) generates and stores mixed wastes that are subject to regulation under the Resource Conservation and Recovery Act (RCRA) Land Disposal Restrictions (LDR). Low level mixed wastes at RFP are destined for disposal at the Nevada Test Site (NTS), and thus must meet stringent NTS Waste Acceptance Criteria (WAC), including free liquids, dispersible solids, and Toxicity Characteristic Leaching Procedure (TCLP) requirements. TCLP requires size reduction of the waste form to less than 0.95 centimeters. This can be accomplished by cutting, crushing, or grinding. These classic size reduction methods have the effect of exposing more surface area of the waste. Stabilization technologies under investigation at RFP include polymer encapsulation by co-extruding the waste with low density polyethylene and microwave melting. The objective of this study is to evaluate the effects of different size reduction methods on TCLP results for polyethylene-encapsulated and microwave melted surrogate waste.

  9. Size dependence of cubic to trigonal structural distortion in silver micro- and nanocrystals under high pressure

    SciTech Connect (OSTI)

    Guo, Qixum; Zhao, Yusheng; Zin, Zhijun; Wang, Zhongwu; Skrabalak, Sara E; Xia, Younan

    2008-01-01

    Silver micro- and nanocrystals with sizes of {approx}2--3.5 {mu}m and {approx}50--100 nm were uniaxially compressed under nonhydrostatic pressures (strong deviatoric stress) up to {approx}30 GPa at room temperature in a symmetric diamond-anvil cell and studied in situ using angle-dispersive synchrotron X-ray diffraction. A cubic to trigonal structural distortion along a 3-fold rotational axis was discovered by careful and comprehensive analysis of the apparent lattice parameter and full width at half-maximum, which are strongly dependent upon the Miller index and crystal size.

  10. Method and apparatus for controlled size distribution of gel microspheres formed from aqueous dispersions. [Patent application

    DOE Patents [OSTI]

    Ryon, A.D.; Haas, P.A.; Vavruska, J.S.

    1982-01-19

    The present invention is directed to a method and apparatus for making a population of dense, closely size-controlled microspheres by sol-gel procedures wherein said microspheres are characterized by a significant percentage of said population being within a predetermined, relatively narrow size range. This is accomplished by subjecting aqueous dispersions of a sol, within a water-immiscible organic liquid to a turbulent flow. Microsphere populations thus provided are useful in vibratory-packed processes for nuclear fuels to be irradiated in LWR- and FBR-type nuclear reactors.

  11. Waste Tank Size Determination for the Hanford River Protection Project Cold Test, Training, and Mockup Facility

    SciTech Connect (OSTI)

    Onishi, Yasuo; Wells, Beric E.; Kuhn, William L.

    2001-03-30

    The objective of the study was to determine the minimum tank size for the Cold Test Facility process testing of Hanford tank waste. This facility would support retrieval of waste in 75-ft-diameter DSTs with mixer pumps and SSTs with fluidic mixers. The cold test model will use full-scale mixer pumps, transfer pumps, and equipment with simulated waste. The study evaluated the acceptability of data for a range of tank diameters and depths and included identifying how the test data would be extrapolated to predict results for a full-size tank.

  12. Increased CPC batch size study for Tank 42 sludge in the Defense Waste Processing Facility

    SciTech Connect (OSTI)

    Daniel, W.E.

    2000-01-06

    A series of experiments have been completed at TNX for the sludge-only REDOX adjusted flowsheet using Tank 42 sludge simulant in response to the Technical Task Request HLW/DWPT/TTR-980013 to increase CPC batch sizes. By increasing the initial SRAT batch size, a melter feed batch at greater waste solids concentration can be prepared and thus increase melter output per batch by about one canister. The increased throughput would allow DWPF to dispose of more waste in a given time period thus shortening the overall campaign.

  13. Repository size for deep geological disposal of partitioning and transmutation high level waste

    SciTech Connect (OSTI)

    Nishihara, Kenji; Nakayama, Shinichi; Oigawa, Hiroyuki

    2007-07-01

    In order to reveal the impact of the partitioning and transmutation (PT) technology on the geological disposal, we investigated the production and disposal of the radioactive wastes from the PT facilities including the dry reprocessing for the spent fuel from accelerator-driven system. After classifying the PT wastes according to the heat generations, the emplacement configurations in the repository were assumed for each group based on the several disposal concepts proposed for the conventional glass waste form. Then, the sizes of the repositories represented by the vault length, emplacement area and excavation volume were estimated. The repository sizes were reduced by PT technology for all disposal concepts. (authors)

  14. Wake Flow Simulations for a Mid-Sized Rim Driven Wind Turbine

    SciTech Connect (OSTI)

    Rob O. Hovsapian; Various

    2014-06-01

    The onshore land where wind farms with conventional wind turbines can be places is limited by various factors including a requirement for relatively high wind speed for turbines' efficient operations. Where such a requirement cannot be met, mid-and small-sized turbines can be a solution. In the current paper simulations for near and for wakes behind a mid-sized Rim Driven Wind Turbine developed by Keuka Energy LLC is analyzed. The purposes of this study is to better understand the wake structure for more efficient wind farm planning. Simulations are conducted with the commercial CFD software STARCCM+

  15. The Importance of Domain Size and Purity in High-Efficiency Organic Solar

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Cells The Importance of Domain Size and Purity in High-Efficiency Organic Solar Cells The Importance of Domain Size and Purity in High-Efficiency Organic Solar Cells Print Wednesday, 27 March 2013 00:00 The efficiency of polymer/organic photovoltaic cells hinges on excitons-electron/hole pairs energized by sunlight-getting to the interfaces of donor and acceptor domains quickly, before recombining. At the interfaces, they become free charges that must then reach device electrodes. With the

  16. Communication: Nucleation of water on ice nanograins: Size, charge, and quantum effects

    SciTech Connect (OSTI)

    Marciante, Mathieu; Calvo, Florent

    2015-05-07

    The sticking cross sections of water molecules on cold size-selected water clusters have been simulated using classical and quantum (path-integral) molecular dynamics trajectories under realistic conditions. The integrated cross sections for charged clusters show significant size effects with comparable trends as in experiments, as well as essentially no sign effect. Vibrational delocalization, although it contributes to enlarging the geometric cross sections, leads to a counter-intuitive decrease in the dynamical cross section obtained from the trajectories. These results are interpreted based on the apparent reduction in the effective interaction between the projectile and the target owing to zero-point effects.

  17. Impact of magnification and size bias on the weak lensing power spectrum

    Office of Scientific and Technical Information (OSTI)

    and peak statistics (Journal Article) | SciTech Connect Impact of magnification and size bias on the weak lensing power spectrum and peak statistics Citation Details In-Document Search Title: Impact of magnification and size bias on the weak lensing power spectrum and peak statistics Authors: Liu J. ; May M. ; Haiman, Z. ; Hui, L. ; Kratochvil, J.M. Publication Date: 2014-01-21 OSTI Identifier: 1132481 Report Number(s): BNL--104426-2014-JA KA3201020 DOE Contract Number: DE-AC02-98CH10886

  18. Influence of pH on the quantum-size-controlled photoelectrochemical etching

    Office of Scientific and Technical Information (OSTI)

    of epitaxial InGaN quantum dots (Journal Article) | SciTech Connect Influence of pH on the quantum-size-controlled photoelectrochemical etching of epitaxial InGaN quantum dots Citation Details In-Document Search This content will become publicly available on November 18, 2016 Title: Influence of pH on the quantum-size-controlled photoelectrochemical etching of epitaxial InGaN quantum dots Illumination by a narrow-band laser has been shown to enable photoelectrochemical (PEC) etching of InGaN

  19. A micrometer-size movable light emitting area in a resonant tunneling light emitting diode

    SciTech Connect (OSTI)

    Pettinari, G., E-mail: giorgio.pettinari@cnr.it [School of Physics and Astronomy, University of Nottingham, Nottingham NG7 2RD (United Kingdom); National Research Council (CNR), Institute for Photonics and Nanotechnologies (IFN-CNR), Via Cineto Romano 42, 00156 Roma (Italy); Balakrishnan, N.; Makarovsky, O.; Campion, R. P.; Patan, A. [School of Physics and Astronomy, University of Nottingham, Nottingham NG7 2RD (United Kingdom)] [School of Physics and Astronomy, University of Nottingham, Nottingham NG7 2RD (United Kingdom); Polimeni, A.; Capizzi, M. [CNISM-Dipartimento di Fisica, Sapienza Universit di Roma, P.le A. Moro 2, 00185 Roma (Italy)] [CNISM-Dipartimento di Fisica, Sapienza Universit di Roma, P.le A. Moro 2, 00185 Roma (Italy)

    2013-12-09

    We report on the fabrication of a micrometer-size movable light emitting area in a GaAs/AlAs quantum well resonant tunneling p-i-n diode. The spatial position of the micrometer-size light emitting area shifts linearly with increasing applied bias, up to 30??m for a bias increment of 0.2?V. Also, the simultaneous resonant tunneling injection of both electrons and holes into the quantum well states is achieved at specific positions of the diode, thus resulting in a tenfold increase of the electroluminescence intensity.

  20. Measuring the mass, density, and size of particles and cells using a suspended microchannel resonator

    SciTech Connect (OSTI)

    Godin, Michel; Bryan, Andrea K.; Burg, Thomas P.; Babcock, Ken; Manalis, Scott R.

    2007-09-17

    We demonstrate the measurement of mass, density, and size of cells and nanoparticles using suspended microchannel resonators. The masses of individual particles are quantified as transient frequency shifts, while the particles transit a microfluidic channel embedded in the resonating cantilever. Mass histograms resulting from these data reveal the distribution of a population of heterogeneously sized particles. Particle density is inferred from measurements made in different carrier fluids since the frequency shift for a particle is proportional to the mass difference relative to the displaced solution. We have characterized the density of polystyrene particles, Escherichia coli, and human red blood cells with a resolution down to 10{sup -4} g/cm{sup 3}.

  1. What Is the Size of the Atomic Nucleus? | U.S. DOE Office of Science (SC)

    Office of Science (SC) Website

    What Is the Size of the Atomic Nucleus? Nuclear Physics (NP) NP Home About Research Facilities Science Highlights Benefits of NP Funding Opportunities Nuclear Science Advisory Committee (NSAC) Community Resources Contact Information Nuclear Physics U.S. Department of Energy SC-26/Germantown Building 1000 Independence Ave., SW Washington, DC 20585 P: (301) 903-3613 F: (301) 903-3833 E: Email Us More Information » 02.29.16 What Is the Size of the Atomic Nucleus? The neutron skin of the nucleus

  2. Size-Dependent Specific Surface Area of Nanoporous Film Assembled by Core-Shell Iron Nanoclusters

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Antony, Jiji; Nutting, Joseph; Baer, Donald R.; Meyer, Daniel; Sharma, Amit; Qiang, You

    2006-01-01

    Nanoporous films of core-shell iron nanoclusters have improved possibilities for remediation, chemical reactivity rate, and environmentally favorable reaction pathways. Conventional methods often have difficulties to yield stable monodispersed core-shell nanoparticles. We produced core-shell nanoclusters by a cluster source that utilizes combination of Fe target sputtering along with gas aggregations in an inert atmosphere at 7 ∘ C . Sizes of core-shell iron-iron oxide nanoclusters are observed with transmission electron microscopy (TEM). The specific surface areas of the porous films obtained from Brunauer-Emmett-Teller (BET) process are size-dependent and compared with the calculated data.more »« less

  3. Fact #785: June 24, 2013 Many Cars Pollute Less Despite Increases in Size |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy 5: June 24, 2013 Many Cars Pollute Less Despite Increases in Size Fact #785: June 24, 2013 Many Cars Pollute Less Despite Increases in Size As new vehicles become more efficient, the amount of carbon dioxide (CO2) they produce decreases. Shown below are several examples of model year (MY) 2012 cars that have decreased the amount of CO2 they produce (in grams per mile) despite the fact that they are larger (in interior volume) than they were ten years ago. Of the

  4. Effect of Engine-Out NOx Control Strategies on PM Size Distribution in

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Heavy-Duty Diesel Engines Developed for 2010 | Department of Energy Engine-Out NOx Control Strategies on PM Size Distribution in Heavy-Duty Diesel Engines Developed for 2010 Effect of Engine-Out NOx Control Strategies on PM Size Distribution in Heavy-Duty Diesel Engines Developed for 2010 A distinct relationship was found between engine-out and SCR-out PM distributions for single-mode testing. PDF icon deer08_ardanese.pdf More Documents & Publications Development of ADECS to Meet 2010

  5. Method of making metal oxide ceramic membranes with small pore sizes

    DOE Patents [OSTI]

    Anderson, Marc A. (Madison, WI); Xu, Qunyin (Madison, WI)

    1992-01-01

    A method for the production of metal oxide ceramic membranes is composed of very small pore size. The process is particularly useful in the creation of titanium and other transition metal oxide membranes. The method utilizes a sol-gel process in which the rate of particle formation is controlled by substituting a relatively large alcohol in the metal alkoxide and by limiting the available water. Stable, transparent metal oxide ceramic membranes are created having a narrow distribution of pore size, with the pore diameter being manipulable in the range of 5 to 40 Angstroms.

  6. 5 Super-Sized Solar Projects Transforming the Clean Energy Landscape |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Super-Sized Solar Projects Transforming the Clean Energy Landscape 5 Super-Sized Solar Projects Transforming the Clean Energy Landscape April 8, 2013 - 4:00pm Addthis The California Valley Solar Ranch has a capacity of 250 MW -- enough energy to power the equivalent of every home in San Luis Obispo County. | Photo courtesy of SunPower. The California Valley Solar Ranch has a capacity of 250 MW -- enough energy to power the equivalent of every home in San Luis Obispo

  7. Solar heating and cooling of residential buildings: sizing, installation and operation of systems. 1980 edition

    SciTech Connect (OSTI)

    1980-09-01

    This manual was prepared as a text for a training course on solar heating and cooling of residential buildings. The course and text are directed toward sizing, installation, operation, and maintenance of solar systems for space heating and hot water supply, and solar cooling is treated only briefly. (MHR)

  8. Characteristics and sources of intermediate size particles in recovery boilers : final project report.

    SciTech Connect (OSTI)

    Baxter, Larry L.; Shaddix, Christopher R.; Verrill, Christopher L.; Wessel, Richard A.

    2005-02-01

    As part of the U.S. Department of Energy (DOE) Office of Industrial Technologies (OIT) Industries of the Future (IOF) Forest Products research program, a collaborative investigation was conducted on the sources, characteristics, and deposition of particles intermediate in size between submicron fume and carryover in recovery boilers. Laboratory experiments on suspended-drop combustion of black liquor and on black liquor char bed combustion demonstrated that both processes generate intermediate size particles (ISP), amounting to 0.5-2% of the black liquor dry solids mass (BLS). Measurements in two U.S. recovery boilers show variable loadings of ISP in the upper furnace, typically between 0.6-3 g/Nm{sup 3}, or 0.3-1.5% of BLS. The measurements show that the ISP mass size distribution increases with size from 5-100 {micro}m, implying that a substantial amount of ISP inertially deposits on steam tubes. ISP particles are depleted in potassium, chlorine, and sulfur relative to the fuel composition. Comprehensive boiler modeling demonstrates that ISP concentrations are substantially overpredicted when using a previously developed algorithm for ISP generation. Equilibrium calculations suggest that alkali carbonate decomposition occurs at intermediate heights in the furnace and may lead to partial destruction of ISP particles formed lower in the furnace. ISP deposition is predicted to occur in the superheater sections, at temperatures greater than 750 C, when the particles are at least partially molten.

  9. Subnanometer and nanometer catalysts, method for preparing size-selected catalysts

    DOE Patents [OSTI]

    Vajda, Stefan; Pellin, Michael J.; Elam, Jeffrey W.; Marshall, Christopher L.; Winans, Randall A.; Meiwes-Broer, Karl-Heinz

    2012-03-27

    Highly uniform cluster based nanocatalysts supported on technologically relevant supports were synthesized for reactions of top industrial relevance. The Pt-cluster based catalysts outperformed the very best reported ODHP catalyst in both activity (by up to two orders of magnitude higher turn-over frequencies) and in selectivity. The results clearly demonstrate that highly dispersed ultra-small Pt clusters precisely localized on high-surface area supports can lead to affordable new catalysts for highly efficient and economic propene production, including considerably simplified separation of the final product. The combined GISAXS-mass spectrometry provides an excellent tool to monitor the evolution of size and shape of nanocatalyst at action under realistic conditions. Also provided are sub-nanometer gold and sub-nanometer to few nm size-selected silver catalysts which possess size dependent tunable catalytic properties in the epoxidation of alkenes. Invented size-selected cluster deposition provides a unique tool to tune material properties by atom-by-atom fashion, which can be stabilized by protective overcoats.

  10. Subnanometer and nanometer catalysts, method for preparing size-selected catalysts

    DOE Patents [OSTI]

    Vajda, Stefan , Pellin, Michael J.; Elam, Jeffrey W.; Marshall, Christopher L.; Winans, Randall A.; Meiwes-Broer, Karl-Heinz

    2012-04-03

    Highly uniform cluster based nanocatalysts supported on technologically relevant supports were synthesized for reactions of top industrial relevance. The Pt-cluster based catalysts outperformed the very best reported ODHP catalyst in both activity (by up to two orders of magnitude higher turn-over frequencies) and in selectivity. The results clearly demonstrate that highly dispersed ultra-small Pt clusters precisely localized on high-surface area supports can lead to affordable new catalysts for highly efficient and economic propene production, including considerably simplified separation of the final product. The combined GISAXS-mass spectrometry provides an excellent tool to monitor the evolution of size and shape of nanocatalyst at action under realistic conditions. Also provided are sub-nanometer gold and sub-nanometer to few nm size-selected silver catalysts which possess size dependent tunable catalytic properties in the epoxidation of alkenes. Invented size-selected cluster deposition provides a unique tool to tune material properties by atom-by-atom fashion, which can be stabilized by protective overcoats.

  11. Magnetic nanoparticles for power absorption: Optimizing size, shape and magnetic properties

    SciTech Connect (OSTI)

    Gonzalez-Fernandez, M.A.; Torres, T.E.; Andres-Verges, M.; Costo, R.; Presa, P. de la; Serna, C.J.; Morales, M.P.; Marquina, C.; Ibarra, M.R.; Goya, G.F.

    2009-10-15

    We present a study on the magnetic properties of naked and silica-coated Fe{sub 3}O{sub 4} nanoparticles with sizes between 5 and 110 nm. Their efficiency as heating agents was assessed through specific power absorption (SPA) measurements as a function of particle size and shape. The results show a strong dependence of the SPA with the particle size, with a maximum around 30 nm, as expected for a Neel relaxation mechanism in single-domain particles. The SiO{sub 2} shell thickness was found to play an important role in the SPA mechanism by hindering the heat outflow, thus decreasing the heating efficiency. It is concluded that a compromise between good heating efficiency and surface functionality for biomedical purposes can be attained by making the SiO{sub 2} functional coating as thin as possible. - Graphical Abstract: The magnetic properties of Fe{sub 3}O{sub 4} nanoparticles from 5 to 110 nm are presented, and their efficiency as heating agents discussed as a function of particle size, shape and surface functionalization.

  12. Estimated size and performance of a natural gas fired duplex Stirling for domestic refrigeration applications

    SciTech Connect (OSTI)

    Berchowitz, D.M. ); Shonder, J. )

    1991-01-01

    Calibrated calculations are used to size an integrated Stirling cooler and engine (Duplex configuration). Fuel for the engine is natural gas and the working fluid is helium. The potential exists for long life and low noise. Performance is shown to be very competitive when compared to standard vapor compression systems. 10 refs., 8 figs., 1 tab.

  13. Small- and Medium-Sized Commercial Building Monitoring and Controls Needs: A Scoping Study

    SciTech Connect (OSTI)

    Katipamula, Srinivas; Underhill, Ronald M.; Goddard, James K.; Taasevigen, Danny J.; Piette, M. A.; Granderson, J.; Brown, Rich E.; Lanzisera, Steven M.; Kuruganti, T.

    2012-10-31

    Buildings consume over 40% of the total energy consumption in the U.S. A significant portion of the energy consumed in buildings is wasted because of the lack of controls or the inability to use existing building automation systems (BASs) properly. Much of the waste occurs because of our inability to manage and controls buildings efficiently. Over 90% of the buildings are either small-size (<5,000 sf) or medium-size (between 5,000 sf and 50,000 sf); these buildings currently do not use BASs to monitor and control their building systems from a central location. According to Commercial Building Energy Consumption Survey (CBECS), about 10% of the buildings in the U.S. use BASs or central controls to manage their building system operations. Buildings that use BASs are typically large (>100,000 sf). Lawrence Berkeley National Laboratory (LBNL), Oak Ridge National Laboratory (ORNL) and Pacific Northwest National Laboratory (PNNL) were asked by the U.S. Department of Energys (DOEs) Building Technologies Program (BTP) to identify monitoring and control needs for small- and medium-sized commercial buildings and recommend possible solutions. This study documents the needs and solutions for small- and medium-sized buildings.

  14. Control of both particle and pore size in nanoporous palladium alloy powders

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Jones, Christopher G.; Cappillino, Patrick J.; Stavila, Vitalie; Robinson, David B.

    2014-07-15

    Energy storage materials often involve chemical reactions with bulk solids. Porosity within the solids can enhance reaction rates. The porosity can be either within or between individual particles of the material. Greater control of the size and uniformity of both types of pore should lead to enhancements of charging and discharging rates in energy storage systems. Furthermore, to control both particle and pore size in nanoporous palladium (Pd)-based hydrogen storage materials, first we created uniformly sized copper particles of about 1 μm diameter by the reduction of copper sulfate with ascorbic acid. In turn, these were used as reducing agentsmore » for tetrachloropalladate in the presence of a block copolymer surfactant. The copper reductant particles are geometrically self-limiting, so the resulting Pd particles are of similar size. The surfactant induces formation of 10 nm-scale pores within the particles. Some residual copper is alloyed with the Pd, reducing hydrogen storage capacity; use of a more reactive Pd salt can mitigate this. The reaction is conveniently performed in gram-scale batches.« less

  15. Control of both particle and pore size in nanoporous palladium alloy powders

    SciTech Connect (OSTI)

    Jones, Christopher G.; Cappillino, Patrick J.; Stavila, Vitalie; Robinson, David B.

    2014-07-15

    Energy storage materials often involve chemical reactions with bulk solids. Porosity within the solids can enhance reaction rates. The porosity can be either within or between individual particles of the material. Greater control of the size and uniformity of both types of pore should lead to enhancements of charging and discharging rates in energy storage systems. Furthermore, to control both particle and pore size in nanoporous palladium (Pd)-based hydrogen storage materials, first we created uniformly sized copper particles of about 1 ?m diameter by the reduction of copper sulfate with ascorbic acid. In turn, these were used as reducing agents for tetrachloropalladate in the presence of a block copolymer surfactant. The copper reductant particles are geometrically self-limiting, so the resulting Pd particles are of similar size. The surfactant induces formation of 10 nm-scale pores within the particles. Some residual copper is alloyed with the Pd, reducing hydrogen storage capacity; use of a more reactive Pd salt can mitigate this. The reaction is conveniently performed in gram-scale batches.

  16. Effect of wood chip size on update gasifier-combustor operation

    SciTech Connect (OSTI)

    Payne, F.A.; Dunlap, J.L.; Caussanel, P.

    1984-01-01

    Three wood chip sizes were tested in a 0.3 GJ/h updraft gasifier-combustor. Thermal output did not vary significantly between wood chips. Pressure and temperature profiles were measured in the gasifier bed. Channeling occurred with the small wood chips. Efficiency of the combustor was determined by a mass and energy balance and an enthalpy technique.

  17. An analytical and computational study of combined rate and size effects on material properties.

    SciTech Connect (OSTI)

    Fang, Huei Eliot; Chen, Zhen; Shen, Luming University of Missouri-Columbia, Columbia, MO); Gan, Yong

    2005-05-01

    The recent interests in developing multiscale model-based simulation procedures have brought about the challenging tasks of bridging different spatial and temporal scales within a unified framework. However, the research focus has been on the scale effect in the spatial domain with the loading rate being assumed to be quasi-static. Although material properties are rate-dependent in nature, little has been done in understanding combined loading rate and specimen size effects on the material properties at different scales. In addition, the length and time scales that can be probed by the molecular level simulations are still fairly limited due to the limitation of computational capability. Based on the experimental and computational capabilities available, therefore, an attempt is made in this report to formulate a hyper-surface in both spatial and temporal domains to predict combined size and rate effects on the mechanical properties of engineering materials. To demonstrate the features of the proposed hyper-surface, tungsten specimens of various sizes under various loading rates are considered with a focus on the uniaxial loading path. The mechanical responses of tungsten specimens under other loading paths are also explored to better understand the size effect. It appears from the preliminary results that the proposed procedure might provide an effective means to bridge different spatial and temporal scales in a unified multiscale modeling framework, and facilitate the application of nanoscale research results to engineering practice.

  18. Estimating payload internal temperatures and radiator size for multimegawatt space platforms

    SciTech Connect (OSTI)

    Dobranich, D.

    1987-08-01

    A conceptual space platform consists of a payload, a power conditioning unit (PCU), and two radiators: the main radiator and a secondary radiator. A computer program was written to determine the required size of the two radiators and the temperatures of the PCU and payload for a given platform power level. An iterative approach is necessary because the required size of the main radiator depends on the size of the secondary radiator and vice versa. Also, the temperatures of the payload and PCU depend on the size of the radiators. The program user can subdivide the two radiators into any number of nodes to increase the accuracy of the radiant heat transfer solution. The use of more nodes also allows better prediction of the nonlinear temperature drop that occurs across the radiators as the working fluid deposits the platform's waste heat in the radiator. View factor expressions are automatically calculated for different choices of the number of nodes. The user can also select different separation distances between the various platform structures. A model is included to couple the radiant and conduction heat transfer that occurs between the payload and its meteoroid shell and between the PCU and its shell. Also, the program allows the use of a refrigerator to cool the payload. If a refrigerator is used, the program determines the amount of additional thermal power needed to run the refrigerator. The results of parametric calculations are included to demonstrate the use of the program.

  19. Probing the size and environment induced phase transformation in CdSe quantum dots

    SciTech Connect (OSTI)

    Karakoti, Ajay S.; Sanghavi, Shail P.; Nachimuthu, Ponnusamy; Yang, Ping; Thevuthasan, Suntharampillai

    2011-11-17

    The structural and electronic properties of CdSe quantum dots in toluene and drop-casted on Si wafer were investigated by in-situ micro X-ray diffraction, X-ray photoelectron spectroscopy and UV-Vis absorption and emission spectroscopy. The in-situ micro diffraction data show that the CdSe quantum dots capped with TOPO or hexadecylamine (HDA) in toluene exhibit predominantly wurtzite crystal structure, which undergoes a phase transformation to zinc blende crystal structure following drop casting on Si and this phase transition increases with decreasing the size of the CdSe quantum dots. Decreasing the size of quantum dots also increases the Se vacancies that facilitate the phase transformation. The X-ray photoelectron spectra show a systematic increase in the core level binding energies of Cd 3d and Se 3d, the band gap and the Cd/Se ratio as the size of the quantum dots decreases from 6.6nm to 2.1nm. This is attributed to the quantum confinement of CdSe crystallites by the capping ligands in toluene which increases with decreasing the size of the quantum dots. However, drop-casting quantum dots on Si alter the density and arrangement of capping ligands and solvent molecules on the quantum dots which causes significant phase transformation.

  20. Effects of Compressive Force, Particle Size and Moisture Content on Mechanical Properties of Biomass Grinds

    SciTech Connect (OSTI)

    Mani, Sudhagar; Tabil, Lope Jr.; Sokhansanj, Shahabaddine

    2006-03-01

    Chemical composition, moisture content, bulk and particle densities, and geometric mean particle size were determined to characterize grinds from wheat and barley straws, corn stover and switchgrass. The biomass grinds were compressed for five levels of compressive forces (1000, 2000, 3000, 4000, 4400 N) and three levels of particle sizes (3.2, 1.6 and 0.8 mm) at two levels of moisture contents (12% and 15% (wb) to establish the compression and relaxation data. Corn stover grind produced the highest compact density at low pressure during compression. Compressive force, particle size and moisture content of grinds significantly affected the compact density of barley straw, corn stover and switchgrass grinds. However, different particle sizes of wheat straw grind did not produce any significant difference on compact density. Barley straw grind had the highest asymptotic modulus among all other biomass grinds indicating that compact from barley straw grind were more rigid than those of other compacts. Asymptotic modulus increased with an increase in maximum compressive pressure. The trend of increase in asymptotic modulus (EA) with the maximum compressive pressure ( 0) was fitted to a second order polynomial equation. Keywords: Biomass grinds, chemical composition, compact density and asymptotic modulus

  1. Size and spacial distribution of micropores in SBA-15 using CM-SANS

    SciTech Connect (OSTI)

    Pollock, Rachel A; Walsh, Brenna R; Fry, Jason A; Ghampson, Tyrone; Centikol, Ozgul; Melnichenko, Yuri B; Kaiser, Helmut; Pynn, Roger; Frederick, Brian G

    2011-01-01

    Diffraction intensity analysis of small-angle neutron scattering measurements of dry SBA-15 have been combined with nonlocal density functional theory (NLDFT) analysis of nitrogen desorption isotherms to characterize the micropore, secondary mesopore, and primary mesopore structure. The radial dependence of the scattering length density, which is sensitive to isolated surface hydroxyls, can only be modeled if the NLDFT pore size distribution is distributed relatively uniformly throughout the silica framework, not localized in a 'corona' around the primary mesopores. Contrast matching-small angle neutron scattering (CM-SANS) measurements, using water, decane, tributylamine, cyclohexane, and isooctane as direct probes of the size of micropores indicate that the smallest pores in SBA-15 have diameter between 5.7 and 6.2 {angstrom}. Correlation of the minimum pore size with the onset of the micropore size distribution provides direct evidence that the shape of the smallest micropores is cylinderlike, which is consistent with their being due to unraveling of the polymer template.

  2. Business Continuity Planning Resources for Small- and Medium-Sized Businesses

    SciTech Connect (OSTI)

    Judd, Kathleen S.; Lesperance, Ann M.

    2010-05-14

    This document/memo summarizes existing resources and guidance on business continuity planning for small- to medium-sized businesses. DTRA will share this information with large commercial businesses who identified the need to help their suppliers and other key collaborators prepare business continuity plans in order to speed recovery from a wide-area bioterrorism incident.

  3. On-line monitoring of aerobic bioremediation with bioluminescent reporter microbes. Final report, July 1991--December 1994

    SciTech Connect (OSTI)

    Sayler, G.S.

    1995-03-01

    A critical issue in the biological characterization of contaminated sites and in the evaluation of relative bioremediation treatment efficiencies is the development of appropriate monitoring methods for the assessment of pollutant bioavailability and microbial in situ activity potential. In nature, pollutants are found dispersed among the solid, liquid and gaseous phases of the complex environments rendering the analytical estimation of their bioavailability and degradation more difficult and irrelevant. Ex situ and extractive analytical techniques have only been misrepresentative of the natural conditions and often resulted in inaccurate estimates of pollutants mass transfer. In this project, the bioluminescent bioreporter bacterium P. Fluorescens HK44 was integrated to an optical device, capable of conducting emitted light, and used as an online biosensor of naphthalene and salicylate. The physiological requirements of the bacteria and the physical limitations of the biosensor were also determined.

  4. Effect of Particle Size and Operating Conditions on Pt3Co PEMFC Cathode Catalyst Durability

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Gummalla, Mallika; Ball, Sarah; Condit, David; Rasouli, Somaye; Yu, Kang; Ferreira, Paulo; Myers, Deborah; Yang, Zhiwei

    2015-05-29

    The initial performance and decay trends of polymer electrolyte membrane fuel cells (PEMFC) cathodes with Pt3Co catalysts of three mean particle sizes (4.9 nm, 8.1 nm, and 14.8 nm) with identical Pt loadings are compared. Even though the cathode based on 4.9 nm catalyst exhibited the highest initial electrochemical surface area (ECA) and mass activity, the cathode based on 8.1 nm catalyst showed better initial performance at high currents. Owing to the low mass activity of the large particles, the initial performance of the 14.8 nm Pt3Co-based electrode was the lowest. The performance decay rate of the electrodes with themore » smallest Pt3Co particle size was the highest and that of the largest Pt3Co particle size was lowest. Interestingly, with increasing number of decay cycles (0.6 to 1.0 V, 50 mV/s), the relative improvement in performance of the cathode based on 8.1 nm Pt3Co over the 4.9 nm Pt3Co increased, owing to better stability of the 8.1 nm catalyst. The electron microprobe analysis (EMPA) of the decayed membrane-electrode assembly (MEA) showed that the amount of Co in the membrane was lower for the larger particles, and the platinum loss into the membrane also decreased with increasing particle size. This suggests that the higher initial performance at high currents with 8.1 nm Pt3Co could be due to lower contamination of the ionomer in the electrode. Furthermore, lower loss of Co from the catalyst with increased particle size could be one of the factors contributing to the stability of ECA and mass activity of electrodes with larger cathode catalyst particles. To delineate the impact of particle size and alloy effects, these results are compared with prior work from our research group on size effects of pure platinum catalysts. The impact of PEMFC operating conditions, including upper potential, relative humidity, and temperature on the alloy catalyst decay trends, along with the EMPA analysis of the decayed MEAs, are reported.« less

  5. Deformation Behavior of Sub-micron and Micron Sized Alumina Particles in Compression.

    SciTech Connect (OSTI)

    Sarobol, Pylin; Chandross, Michael E.; Carroll, Jay; Mook, William; Boyce, Brad; Kotula, Paul G.; McKenzie, Bonnie B.; Bufford, Daniel Charles; Hall, Aaron Christopher.

    2014-09-01

    The ability to integrate ceramics with other materials has been limited due to high temperature (>800degC) ceramic processing. Recently, researchers demonstrated a novel process , aerosol deposition (AD), to fabricate ceramic films at room temperature (RT). In this process, sub - micro n sized ceramic particles are accelerated by pressurized gas, impacted on the substrate, plastically deformed, and form a dense film under vacuum. This AD process eliminates high temperature processing thereby enabling new coatings and device integration, in which ceramics can be deposited on metals, plastics, and glass. However, k nowledge in fundamental mechanisms for ceramic particle s to deform and form a dense ceramic film is still needed and is essential in advancing this novel RT technology. In this wo rk, a combination of experimentation and atomistic simulation was used to determine the deformation behavior of sub - micron sized ceramic particle s ; this is the first fundamental step needed to explain coating formation in the AD process . High purity, singl e crystal, alpha alumina particles with nominal size s of 0.3 um and 3.0 um were examined. Particle characterization, using transmission electron microscopy (TEM ), showed that the 0.3 u m particles were relatively defect - free single crystals whereas 3.0 u m p articles were highly defective single crystals or particles contained low angle grain boundaries. Sub - micron sized Al 2 O 3 particles exhibited ductile failure in compression. In situ compression experiments showed 0.3um particles deformed plastically, fractured, and became polycrystalline. Moreover, dislocation activit y was observed within the se particles during compression . These sub - micron sized Al 2 O 3 particles exhibited large accum ulated strain (2 - 3 times those of micron - sized particles) before first fracture. I n agreement with the findings from experimentation , a tomistic simulation s of nano - Al 2 O 3 particles showed dislocation slip and significant plastic deformation during compressi on . On the other hand, the micron sized Al 2 O 3 particles exhibited brittle f racture in compression. In situ compression experiments showed 3um Al 2 O 3 particles fractured into pieces without observable plastic deformation in compression. Particle deformation behaviors will be used to inform Al 2 O 3 coating deposition parameters and particle - particle bonding in the consolidated Al 2 O 3 coatings.

  6. Uncertainty in Modeling Dust Mass Balance and Radiative Forcing from Size Parameterization

    SciTech Connect (OSTI)

    Zhao, Chun; Chen, Siyu; Leung, Lai-Yung R.; Qian, Yun; Kok, Jasper; Zaveri, Rahul A.; Huang, J.

    2013-11-05

    This study examines the uncertainties in simulating mass balance and radiative forcing of mineral dust due to biases in the aerosol size parameterization. Simulations are conducted quasi-globally (180oW-180oE and 60oS-70oN) using the WRF24 Chem model with three different approaches to represent aerosol size distribution (8-bin, 4-bin, and 3-mode). The biases in the 3-mode or 4-bin approaches against a relatively more accurate 8-bin approach in simulating dust mass balance and radiative forcing are identified. Compared to the 8-bin approach, the 4-bin approach simulates similar but coarser size distributions of dust particles in the atmosphere, while the 3-mode pproach retains more fine dust particles but fewer coarse dust particles due to its prescribed og of each mode. Although the 3-mode approach yields up to 10 days longer dust mass lifetime over the remote oceanic regions than the 8-bin approach, the three size approaches produce similar dust mass lifetime (3.2 days to 3.5 days) on quasi-global average, reflecting that the global dust mass lifetime is mainly determined by the dust mass lifetime near the dust source regions. With the same global dust emission (~6000 Tg yr-1), the 8-bin approach produces a dust mass loading of 39 Tg, while the 4-bin and 3-mode approaches produce 3% (40.2 Tg) and 25% (49.1 Tg) higher dust mass loading, respectively. The difference in dust mass loading between the 8-bin approach and the 4-bin or 3-mode approaches has large spatial variations, with generally smaller relative difference (<10%) near the surface over the dust source regions. The three size approaches also result in significantly different dry and wet deposition fluxes and number concentrations of dust. The difference in dust aerosol optical depth (AOD) (a factor of 3) among the three size approaches is much larger than their difference (25%) in dust mass loading. Compared to the 8-bin approach, the 4-bin approach yields stronger dust absorptivity, while the 3-mode approach yields weaker dust absorptivity. Overall, on quasi-global average, the three size parameterizations result in a significant difference of a factor of 2~3 in dust surface cooling (-1.02~-2.87 W m-2) and atmospheric warming (0.39~0.96 W m-2) and in a tremendous difference of a factor of ~10 in dust TOA cooling (-0.24~-2.20 W m-2). An uncertainty of a factor of 2 is quantified in dust emission estimation due to the different size parameterizations. This study also highlights the uncertainties in modeling dust mass and number loading, deposition fluxes, and radiative forcing resulting from different size parameterizations, and motivates further investigation of the impact of size parameterizations on modeling dust impacts on air quality, climate, and ecosystem.

  7. Composition and grain size effects on the structural and mechanical properties of CuZr nanoglasses

    SciTech Connect (OSTI)

    Adibi, Sara [Institute of High Performance Computing, A*STAR, 138632 Singapore (Singapore); Mechanical Engineering Department, National University of Singapore, 117576 Singapore (Singapore); Branicio, Paulo S., E-mail: branicio@ihpc.a-star.edu.sg; Zhang, Yong-Wei [Institute of High Performance Computing, A*STAR, 138632 Singapore (Singapore); Joshi, Shailendra P., E-mail: Shailendra@nus.edu.sg [Mechanical Engineering Department, National University of Singapore, 117576 Singapore (Singapore)

    2014-07-28

    Nanoglasses (NGs), metallic glasses (MGs) with a nanoscale grain structure, have the potential to considerably increase the ductility of traditional MGs while retaining their outstanding mechanical properties. We investigated the effects of composition on the structural and mechanical properties of CuZr NG films with grain sizes between 3 to 15?nm using molecular dynamics simulations. Results indicate a transition from localized shear banding to homogeneous superplastic flow with decreasing grain size, although the critical average grain size depends on composition: 5?nm for Cu{sub 36}Zr{sub 64} and 3?nm for Cu{sub 64}Zr{sub 36}. The flow stress of the superplastic NG at different compositions follows the trend of the yield stress of the parent MG, i.e., Cu{sub 36}Zr{sub 64} yield/flow stress: 2.54?GPa/1.29?GPa and Cu{sub 64}Zr{sub 36} yield/flow stress: 3.57?GPa /1.58?GPa. Structural analysis indicates that the differences in mechanical behavior as a function of composition are rooted at the distinct statistics of prominent atomic Voronoi polyhedra. The mechanical behavior of NGs is also affected by the grain boundary thickness and the fraction of atoms at interfaces for a given average grain size. The results suggest that the composition dependence of the mechanical behavior of NGs follows that of their parent MGs, e.g., a stronger MG will generate a stronger NG, while the intrinsic tendency for homogeneous deformation occurring at small grain size is not affected by composition.

  8. Size-dependent error of the density functional theory ionization potential in vacuum and solution

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Sosa Vazquez, Xochitl A.; Isborn, Christine M.

    2015-12-22

    Density functional theory is often the method of choice for modeling the energetics of large molecules and including explicit solvation effects. It is preferable to use a method that treats systems of different sizes and with different amounts of explicit solvent on equal footing. However, recent work suggests that approximate density functional theory has a size-dependent error in the computation of the ionization potential. We here investigate the lack of size-intensivity of the ionization potential computed with approximate density functionals in vacuum and solution. We show that local and semi-local approximations to exchange do not yield a constant ionization potentialmore » for an increasing number of identical isolated molecules in vacuum. Instead, as the number of molecules increases, the total energy required to ionize the system decreases. Rather surprisingly, we find that this is still the case in solution, whether using a polarizable continuum model or with explicit solvent that breaks the degeneracy of each solute, and we find that explicit solvent in the calculation can exacerbate the size-dependent delocalization error. We demonstrate that increasing the amount of exact exchange changes the character of the polarization of the solvent molecules; for small amounts of exact exchange the solvent molecules contribute a fraction of their electron density to the ionized electron, but for larger amounts of exact exchange they properly polarize in response to the cationic solute. As a result, in vacuum and explicit solvent, the ionization potential can be made size-intensive by optimally tuning a long-range corrected hybrid functional.« less

  9. Larger sized wire arrays on 1.5 MA Z-pinch generator

    SciTech Connect (OSTI)

    Safronova, A. S. Kantsyrev, V. L. Weller, M. E. Shlyaptseva, V. V. Shrestha, I. K. Esaulov, A. A. Stafford, A.; Chuvatin, A. S.; Coverdale, C. A.; Jones, B.

    2014-12-15

    Experiments on the UNR Zebra generator with Load Current Multiplier (LCM) allow for implosions of larger sized wire array loads than at standard current of 1 MA. Advantages of larger sized planar wire array implosions include enhanced energy coupling to plasmas, better diagnostic access to observable plasma regions, and more complex geometries of the wire loads. The experiments with larger sized wire arrays were performed on 1.5 MA Zebra with LCM (the anode-cathode gap was 1 cm, which is half the gap used in the standard mode). In particular, larger sized multi-planar wire arrays had two outer wire planes from mid-atomic-number wires to create a global magnetic field (gmf) and plasma flow between them. A modified central plane with a few Al wires at the edges was put in the middle between outer planes to influence gmf and to create Al plasma flow in the perpendicular direction (to the outer arrays plasma flow). Such modified plane has different number of empty slots: it was increased from 6 up to 10, hence increasing the gap inside the middle plane from 4.9 to 7.7 mm, respectively. Such load configuration allows for more independent study of the flows of L-shell mid-atomic-number plasma (between the outer planes) and K-shell Al plasma (which first fills the gap between the edge wires along the middle plane) and their radiation in space and time. We demonstrate that such configuration produces higher linear radiation yield and electron temperatures as well as advantages of better diagnostics access to observable plasma regions and how the load geometry (size of the gap in the middle plane) influences K-shell Al radiation. In particular, K-shell Al radiation was delayed compared to L-shell mid-atomic-number radiation when the gap in the middle plane was large enough (when the number of empty slots was increased up to ten)

  10. Size-dependent error of the density functional theory ionization potential in vacuum and solution

    SciTech Connect (OSTI)

    Sosa Vazquez, Xochitl A.; Isborn, Christine M.

    2015-12-22

    Density functional theory is often the method of choice for modeling the energetics of large molecules and including explicit solvation effects. It is preferable to use a method that treats systems of different sizes and with different amounts of explicit solvent on equal footing. However, recent work suggests that approximate density functional theory has a size-dependent error in the computation of the ionization potential. We here investigate the lack of size-intensivity of the ionization potential computed with approximate density functionals in vacuum and solution. We show that local and semi-local approximations to exchange do not yield a constant ionization potential for an increasing number of identical isolated molecules in vacuum. Instead, as the number of molecules increases, the total energy required to ionize the system decreases. Rather surprisingly, we find that this is still the case in solution, whether using a polarizable continuum model or with explicit solvent that breaks the degeneracy of each solute, and we find that explicit solvent in the calculation can exacerbate the size-dependent delocalization error. We demonstrate that increasing the amount of exact exchange changes the character of the polarization of the solvent molecules; for small amounts of exact exchange the solvent molecules contribute a fraction of their electron density to the ionized electron, but for larger amounts of exact exchange they properly polarize in response to the cationic solute. As a result, in vacuum and explicit solvent, the ionization potential can be made size-intensive by optimally tuning a long-range corrected hybrid functional.

  11. Implications of access hole size on tank waste retrieval system design and cost

    SciTech Connect (OSTI)

    Babcock, S.M.; Kwon, D.S.; Burks, B.L.; Stoughton, R.S.; Evans, M.S.

    1994-05-01

    The DOE Environmental Restoration and Waste Management Robotics Technology Development Program has been investigating the application of robotics technology to the retrieval of waste from single-shell storage tanks for several years. The use of a large, ``long-reach`` manipulator to position and orient a variety of tools and other equipment has been recommended. The objective of this study is to determine the appropriate access hole size for the tank waste retrieval system installation. Previous reports on the impact of access hole size on manipulator performance are summarized. In addition, the practical limitation for access hole size based on structural limitations of the waste storage tanks, the state-of-the-art size limitations for the installation of new risers, the radiation safety implications of various access hole sizes, and overall system cost implications are considered. Basic conclusions include: (1) overall cost of remediation will; be dominated by the costs of the balance of plant and time required to perform the task rather than the cost of manipulator hardware or the cost of installing a riser, (2) the most desirable solution from a manipulator controls point of view is to make the manipulator as stiff as possible and have as high as possible a natural frequency, which implies a large access hole diameter, (3) beyond some diameter; simple, uniform cross-section elements become less advantageous from a weight standpoint and alternative structures should be considered, and (4) additional shielding and contamination control measures would be required for larger holes. Parametric studies summarized in this report considered 3,790,000 1 (1,000,000 gal) tanks, while initial applications are likely to be for 2,840,000 1 (750,000 gal) tanks. Therefore, the calculations should be somewhat conservative, recognizing the limitations of the specific conditions considered.

  12. Importance of Size and Distribution of Ni Nanoparticles for the Hydrodeoxygenation of Microalgae Oil

    SciTech Connect (OSTI)

    Song, Wenji; Zhao, Chen; Lercher, Johannes A.

    2013-07-22

    Improved synthetic approaches for preparing small-sized Ni nanoparticles (d=3 nm) supported on HBEA zeolite have been explored and compared with the traditional impregnation method. The formation of surface nickel silicate/aluminate involved in the two precipitation processes are inferred to lead to the stronger interaction between the metal and the support. The lower Brnsted acid concentrations of these two Ni/HBEA catalysts compared with the parent zeolite caused by the partial exchange of Brnsted acid sites by Ni2+ cations do not influence the hydrodeoxygenation rates, but alter the product selectivity. Higher initial rates and higher stability have been achieved with these optimized catalysts for the hydrodeoxygenation of stearic acid and microalgae oil. Small metal particles facilitate high initial catalytic activity in the fresh sample and size uniformity ensures high catalyst stability.

  13. Porous silicon structures with high surface area/specific pore size

    DOE Patents [OSTI]

    Northrup, M. Allen (Berkeley, CA); Yu, Conrad M. (Antioch, CA); Raley, Norman F. (Danville, CA)

    1999-01-01

    Fabrication and use of porous silicon structures to increase surface area of heated reaction chambers, electrophoresis devices, and thermopneumatic sensor-actuators, chemical preconcentrates, and filtering or control flow devices. In particular, such high surface area or specific pore size porous silicon structures will be useful in significantly augmenting the adsorption, vaporization, desorption, condensation and flow of liquids and gasses in applications that use such processes on a miniature scale. Examples that will benefit from a high surface area, porous silicon structure include sample preconcentrators that are designed to adsorb and subsequently desorb specific chemical species from a sample background; chemical reaction chambers with enhanced surface reaction rates; and sensor-actuator chamber devices with increased pressure for thermopneumatic actuation of integrated membranes. Examples that benefit from specific pore sized porous silicon are chemical/biological filters and thermally-activated flow devices with active or adjacent surfaces such as electrodes or heaters.

  14. TECHNOLOGY EVALUATION FOR CONDITIONING OF HANFORD TANK WASTE USING SOLIDS SEGREGATION AND SIZE REDUCTION

    SciTech Connect (OSTI)

    Restivo, M.; Stone, M.; Herman, D.; Lambert, D.; Duignan, M.; SMITH, G.; WELLS, B.; LUMETTA, G.; ENDRELIN, C.; ADKINS, H.

    2014-04-15

    The Savannah River National Laboratory (SRNL) and the Pacific Northwest National Laboratory (PNNL) team performed a literature search on current and proposed technologies for solids segregation and size reduction of particles in the slurry feed from the Hanford Tank Farm (HTF). The team also investigated technology research performed on waste tank slurries, both real and simulated, and reviewed academic theory applicable to solids segregation and size reduction. This review included text book applications and theory, commercial applications suitable for a nuclear environment, research of commercial technologies suitable for a nuclear environment, and those technologies installed in a nuclear environment, including technologies implemented at Department of Energy (DOE) facilities. Information on each technology is provided in this report along with the advantages and disadvantages of the technologies for this application.

  15. Synthesis of supported bimetallic nanoparticles with controlled size and composition distributions for active site elucidation

    SciTech Connect (OSTI)

    Hakim, Sikander H.; Sener, Canan; Alba Rubio, Ana C.; Gostanian, Thomas M.; O'neill, Brandon J; Ribeiro, Fabio H.; Miller, Jeffrey T.; Dumesic, James A

    2015-08-01

    Elucidation of active sites in supported bimetallic catalysts is complicated by the high level of dispersity in the nanoparticle size and composition that is inherent in conventional methods of catalyst preparation. We present a synthesis strategy that leads to highly dispersed, bimetallic nanoparticles with uniform particle size and composition by means of controlled surface reactions. We demonstrate the synthesis of three systems, RhMo, PtMo, and RhRe, consisting of a highly reducible metal with an oxophilic promoter. These catalysts are characterized by FTIR, CO chemisorption, STEM/EDS, TPR, and XAS analysis. The catalytic properties of these bimetallic nanoparticles were probed for the selective CO hydrogenolysis of (hydroxymethyl)tetrahydropyran to produce 1,6 hexanediol. Based on the characterization results and reactivity trends, the active sites in the hydrogenolysis reaction are identified to be small ensembles of the more noble metal (Rh, Pt) adjacent to highly reduced moieties of the more oxophilic metal (Mo, Re).

  16. Technology Evaluation for Conditioning of Hanford Tank Waste Using Solids Segregation and Size Reduction

    SciTech Connect (OSTI)

    Restivo, Michael L.; Stone, M. E.; Herman, D. T.; Lambert, Daniel P.; Duignan, Mark R.; Smith, Gary L.; Wells, Beric E.; Lumetta, Gregg J.; Enderlin, Carl W.; Adkins, Harold E.

    2014-04-24

    The Savannah River National Laboratory and the Pacific Northwest National Laboratory team performed a literature search on current and proposed technologies for solids segregation and size reduction of particles in the slurry feed from the Hanford Tank Farm. The team also investigated technology research performed on waste tank slurries, both real and simulated, and reviewed academic theory applicable to solids segregation and size reduction. This review included text book applications and theory, commercial applications suitable for a nuclear environment, research of commercial technologies suitable for a nuclear environment, and those technologies installed in a nuclear environment, including technologies implemented at Department of Energy facilities. Information on each technology is provided in this report along with the advantages and disadvantages of the technologies for this application. Any technology selected would require testing to verify the ability to meet the High-Level Waste Feed Waste Acceptance Criteria to the Hanford Tank Waste Treatment and Immobilization Plant Pretreatment Facility.

  17. Water Desalination Using Nanoporous Single-Layer Graphene with Tunable Pore Size

    SciTech Connect (OSTI)

    Surwade, Sumedh P [ORNL; Smirnov, Sergei N [ORNL; Vlassiouk, Ivan V [ORNL; Unocic, Raymond R [ORNL; Veith, Gabriel M [ORNL; Dai, Sheng [ORNL; Mahurin, Shannon Mark [ORNL

    2015-01-01

    Graphene has great potential to serve as a separation membrane due to its unique properties such as chemical and mechanical stability, flexibility and most importantly its one-atom thickness. In this study, we demonstrate first experimental evidence of the use of single-layer porous graphene as a desalination membrane. Nanometer-sized pores are introduced into single layer graphene using a convenient oxygen plasma etching process that permits tuning of the pore size. The resulting porous graphene membrane exhibited high rejection of salt ions and rapid water transport, thus functioning as an efficient water desalination membrane. Salt rejection selectivity of nearly 100% and exceptionally high water fluxes exceeding 105 g m-2 s-1 at 40 C were measured using saturated water vapor as a driving force.

  18. Porous silicon structures with high surface area/specific pore size

    DOE Patents [OSTI]

    Northrup, M.A.; Yu, C.M.; Raley, N.F.

    1999-03-16

    Fabrication and use of porous silicon structures to increase surface area of heated reaction chambers, electrophoresis devices, and thermopneumatic sensor-actuators, chemical preconcentrates, and filtering or control flow devices. In particular, such high surface area or specific pore size porous silicon structures will be useful in significantly augmenting the adsorption, vaporization, desorption, condensation and flow of liquids and gases in applications that use such processes on a miniature scale. Examples that will benefit from a high surface area, porous silicon structure include sample preconcentrators that are designed to adsorb and subsequently desorb specific chemical species from a sample background; chemical reaction chambers with enhanced surface reaction rates; and sensor-actuator chamber devices with increased pressure for thermopneumatic actuation of integrated membranes. Examples that benefit from specific pore sized porous silicon are chemical/biological filters and thermally-activated flow devices with active or adjacent surfaces such as electrodes or heaters. 9 figs.

  19. Real-time spot size camera for pulsed high-energy radiographic machines

    SciTech Connect (OSTI)

    Watson, S.A.

    1993-06-01

    The focal spot size of an x-ray source is a critical parameter which degrades resolution in a flash radiograph. For best results, a small round focal spot is required. Therefore, a fast and accurate measurement of the spot size is highly desirable to facilitate machine tuning. This paper describes two systems developed for Los Alamos National Laboratory`s Pulsed High-Energy Radiographic Machine Emitting X-rays (PHERMEX) facility. The first uses a CCD camera combined with high-brightness floors, while the second utilizes phosphor storage screens. Other techniques typically record only the line spread function on radiographic film, while systems in this paper measure the more general two-dimensional point-spread function and associated modulation transfer function in real time for shot-to-shot comparison.

  20. Real-time spot size camera for pulsed high-energy radiographic machines

    SciTech Connect (OSTI)

    Watson, S.A.

    1993-01-01

    The focal spot size of an x-ray source is a critical parameter which degrades resolution in a flash radiograph. For best results, a small round focal spot is required. Therefore, a fast and accurate measurement of the spot size is highly desirable to facilitate machine tuning. This paper describes two systems developed for Los Alamos National Laboratory's Pulsed High-Energy Radiographic Machine Emitting X-rays (PHERMEX) facility. The first uses a CCD camera combined with high-brightness floors, while the second utilizes phosphor storage screens. Other techniques typically record only the line spread function on radiographic film, while systems in this paper measure the more general two-dimensional point-spread function and associated modulation transfer function in real time for shot-to-shot comparison.