National Library of Energy BETA

Sample records for kilograms kg pounds

  1. Sandia National Laboratories: 39,000 Pounds of Ceiling Tiles...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    39,000 Pounds of Ceiling Tiles Recycled December 21, 2010 ceiling tile shipment Ceiling tile shipment It took over two years to accumulate, but Sandia National LaboratoriesNew...

  2. Site Recycles Millions of Pounds of Metal | Department of Energy

    Energy Savers [EERE]

    Site Recycles Millions of Pounds of Metal Site Recycles Millions of Pounds of Metal May 30, 2013 - 12:00pm Addthis The Portsmouth site worked with two regional companies and local law enforcement to arrange transportation of 10 massive synchronous condensers as part of an asset recovery effort. The Portsmouth site worked with two regional companies and local law enforcement to arrange transportation of 10 massive synchronous condensers as part of an asset recovery effort. PIKETON, Ohio - The EM

  3. Leitner Hubert KG | Open Energy Information

    Open Energy Info (EERE)

    Hubert KG Place: Bruneck (BZ), Italy Zip: I-39031 Product: Distributes PV power inverters for Magnetek and Modules for Tenospot. References: Leitner Hubert KG1 This article...

  4. Campa Sud GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    GmbH Co KG Jump to: navigation, search Name: Campa Sud GmbH & Co. KG Place: Straubing, Germany Product: Campa Sd GmbH & Co. KG was established in 2002 as a production...

  5. Fuel 21 GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    GmbH Co KG Jump to: navigation, search Name: fuel 21 GmbH & Co. KG Place: Klein Wanzleben, Germany Zip: 39164 Product: fuel 21 GmbH & Co. KG started in 2006 as a member of...

  6. Flabeg GmbH co KG | Open Energy Information

    Open Energy Info (EERE)

    KG Place: Nrnberg, Germany Zip: 90441 Sector: Solar Product: Glass finishing for automotive and solar industry, especially STEG. References: Flabeg GmbH & co KG1 This article...

  7. Idaho Crews Overcome Challenges to Safely Dispose 1-Million-Pound...

    Office of Environmental Management (EM)

    1-Million-Pound Hot Cell IDAHO FALLS, Idaho - American Recovery and Reinvestment Act cleanup crews at the Idaho site recently disposed of a hot cell as heavy as nine fully ...

  8. DOE Employees, Contractors Donate More than 15,500 Pounds of Food

    Broader source: Energy.gov [DOE]

    PIKETON, Ohio ̶ As part of the federal government’s Feds Feed Families campaign, employees at the Portsmouth Gaseous Diffusion Plant donated 15,681 pounds of canned goods and other items to local food pantries in 2014.

  9. Otag GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    Name: Otag GmbH & Co KG Place: Olsberg, Germany Zip: 59939 Product: Micro combined heat and power plant manufacturer (<2.2 kWe). References: Otag GmbH & Co KG1 This article...

  10. Campa Biodiesel GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    GmbH Co KG Jump to: navigation, search Name: Campa-Biodiesel GmbH & Co. KG Place: Ochsenfurt, Bavaria, Germany Zip: 97199 Product: Campa Biodiesel is a producer and marketer of...

  11. Marina Biodiesel GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    Marina Biodiesel GmbH Co KG Jump to: navigation, search Name: Marina Biodiesel GmbH & Co.KG Place: Brunsbttel, Schleswig-Holstein, Germany Zip: 25541 Product: Marina Biodiesel...

  12. AVANCIS GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    GmbH Co KG Jump to: navigation, search Name: AVANCIS GmbH & Co KG Place: Torgau, Germany Product: Germany-based CIS PV cell manufacturer and subsidiary of Saint Gobain....

  13. GETproject GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    search Name: GETproject GmbH & Co KG Place: Kiel, Germany Zip: 24109 Sector: Wind energy Product: Wind energy project developer. References: GETproject GmbH & Co KG1...

  14. ETBKN GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    to: navigation, search Name: ETBKN GmbH & Co KG Place: Germany Product: Germany-based biogas project developer. References: ETBKN GmbH & Co KG1 This article is a stub. You can...

  15. Renion Biogas GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    Renion Biogas GmbH Co KG Jump to: navigation, search Name: Renion Biogas GmbH & Co KG Place: Regensburg, Bavaria, Germany Zip: 93055 Product: JV between Schmack Biogas and Rewag to...

  16. Berger Lichttechnik GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    Berger Lichttechnik GmbH Co KG Jump to: navigation, search Name: Berger Lichttechnik GmbH & Co KG Place: Baierbrunn, Germany Zip: D-82065 Sector: Solar Product: German manufacturer...

  17. RIO Energie GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    RIO Energie GmbH Co KG Jump to: navigation, search Name: RIO Energie GmbH & Co KG Place: Mainz, Germany Zip: 55118 Sector: Wind energy Product: Subsidiary of the juwi group, Rio...

  18. CIS Solartechnik GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    Affinerie and the Cordes & Graefe KG formed a joint venture in order to develop the CIS solar cells. References: CIS Solartechnik GmbH & Co.KG1 This article is a stub. You can...

  19. Table 4.10 Uranium Reserves, 2008 (Million Pounds Uranium Oxide)

    U.S. Energy Information Administration (EIA) Indexed Site

    0 Uranium Reserves,1 2008 (Million Pounds Uranium Oxide) State Forward-Cost 2 Category (dollars 3 per pound) $50 or Less $100 or Less Total 539 1,227 Wyoming 220 446 New Mexico 179 390 Arizona, Colorado, Utah 63 198 Texas 27 40 Others 4 50 154 1The U.S. Energy Information Administration (EIA) category of uranium reserves is equivalent to the internationally reported category of "Reasonably Assured Resources" (RAR). Notes: * Estimates are at end of year. * See "Uranium Oxide"

  20. Portsmouth/Paducah Employees, Contractors Donate 17,500 Pounds of Food

    Broader source: Energy.gov [DOE]

    LEXINGTON, Ky. – Employees and contractors of EM’s Portsmouth/Paducah Project Office (PPPO) donated more than 17,541 pounds of food to families in need in their local communities as part of the federal government’s 2014 Feds Feed Families campaign.

  1. Meihui Windpark GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    Name: Meihui Windpark GmbH & Co KG Place: Niedersachsen, Lower Saxony, Germany Sector: Wind energy Product: German-based wind farm operator, previously in ownership of Taiwan's...

  2. Fuhrlander Pfleiderer GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    Name: Fuhrlander-Pfleiderer GmbH & Co KG Place: Germany Sector: Wind energy Product: Joint venture combining the wind power activities of Furhlander AG and Pfleiderer AG....

  3. Elektrizitatswerk Goldbach Hoesbach GmbH Co KG | Open Energy...

    Open Energy Info (EERE)

    search Name: Elektrizitatswerk Goldbach-Hoesbach GmbH & Co KG Place: Goldbach, Hessen, Germany Zip: 63773 Product: German power provider. Coordinates: 40.413574,...

  4. Cellulosic emissions (kg of pollutant per km2 county area) -...

    Open Energy Info (EERE)

    Cellulosic emissions (kg of pollutant per km2 county area) Data reflects projected air emissions of nitrogen oxides (NOX), ammonia (NH3), carbon monoxide (CO), sulfur oxide (SOX),...

  5. Energiefeld Bayern GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    & Co KG Place: Mnchen, Bavaria, Germany Zip: 81539 Product: JV between Schmack Biogas and Erdgas Suedbayern to constructown biogas plants and market electricity directly....

  6. Schnell Z ndstrahlmotoren AG Co KG | Open Energy Information

    Open Energy Info (EERE)

    Zndstrahlmotoren is specialized on the production of dual fuel engines (CHPs) for biogas, dump and sewage gas. References: Schnell Zndstrahlmotoren AG & Co. KG1 This...

  7. Imtech Deutschland GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    & Co KG Place: Hamburg, Hamburg, Germany Zip: 22041 Product: German division of Imtech N.V. - an energy management and power engineering company. References: Imtech Deutschland...

  8. Energy age wind ltd Co KG | Open Energy Information

    Open Energy Info (EERE)

    48291 Sector: Wind energy Product: Energy-age-wind aims to develop small scale vertical-axis wind turbines. References: energy-age-wind ltd & Co. KG1 This article is a stub....

  9. SGL Rotec GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    SGL Rotec GmbH & Co KG Place: Lemwerder, Hamburg, Germany Zip: 27809 Sector: Wind energy Product: Germany-based manufacturer of rotor blades for wind turbines. References: SGL...

  10. Windkraft Luhrs GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    to: navigation, search Name: Windkraft Luhrs GmbH & Co KG Place: Germany Sector: Wind energy Product: Germany-based, wind farm developer. References: Windkraft Luhrs GmbH & Co...

  11. Hoogen Bioenergie GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    Germany Zip: 1968 Product: Hoogen Bioenergie assist in building and operating biogas plants. References: Hoogen Bioenergie GmbH & Co.KG1 This article is a stub. You can...

  12. Schunk Group GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    is a worldwide technology company with a wide range of products. It manufactures bipolar plates for fuel cells. References: Schunk Group GmbH & Co KG1 This article is a...

  13. Nordwind Handels GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    to: navigation, search Name: Nordwind Handels GmbH & Co. KG Place: Germany Product: German project developer based in Beiersdorf-Freudenberg. The firm is one of Vestas largest...

  14. U.S. Department of Energy Donates More Than 120,000 Pounds of Food to "Feds

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Feed Families" | Department of Energy Donates More Than 120,000 Pounds of Food to "Feds Feed Families" U.S. Department of Energy Donates More Than 120,000 Pounds of Food to "Feds Feed Families" September 29, 2010 - 12:00am Addthis WASHINGTON, D.C. - Energy Secretary Steven Chu today announced that U.S. Department of Energy employees and contractors collected and donated more than 120,000 pounds of food and supplies during the federal government's second annual

  15. NREL Staff Donates More Than 1,000 Pounds of Food for the Needy - News

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Releases | NREL Staff Donates More Than 1,000 Pounds of Food for the Needy July 5, 2012 Employees at the U.S. Department of Energy's National Renewable Energy Laboratory (NREL) donated enough food in a recent drive to feed 50 adults and 100 children for a week. "It was a fantastic turnout," Erika Echols, NREL's staff council president, said. "Our executive managers set up a booth and boxed all the food that was contributed. We had 24 more boxes than we did a year ago."

  16. Performance test report for the 1000 kg melter

    SciTech Connect (OSTI)

    Eaton, W.C.

    1995-11-01

    A multiphase program was initiated in 1994 to test commercially available melter technologies for the vitrification of the low-level waste (LLW) stream from defense wastes stored in underground tanks at the Hanford Site in southeastern Washington State. Phase 1 of the melter demonstration tests using simulated LLW was completed during fiscal year 1995. This document is the 100 kg melter offgas report on testing performed by GTS Duratek Inc., in Columbia, Maryland. GTS Duratek (one of the seven vendors selected) was chosen to demonstrate Joule heated melter technology under WHC subcontract number MMI-SVV- 384215. The document contains the complete offgas report on the 100 kg melter as prepared by Parsons Engineering Science, Inc. A summary of this report is also contained in the ``GTS Duratek, Phase 1 Hanford Low-Level Waste Melter Tests: Final Report`` (WHC-SD-VI-027).

  17. Dark matter limits froma 15 kg windowless bubble chamber

    SciTech Connect (OSTI)

    Szydagis, Matthew Mark; /Chicago U.

    2010-12-01

    The COUPP collaboration has successfully used bubble chambers, a technology previously applied only to high-energy physics experiments, as direct dark matter detectors. It has produced the world's most stringent spin-dependent WIMP limits, and increasingly competitive spin-independent limits. These limits were achieved by capitalizing on an intrinsic rejection of the gamma background that all other direct detection experiments must address through high-density shielding and empirically-determined data cuts. The history of COUPP, including its earliest prototypes and latest results, is briefly discussed in this thesis. The feasibility of a new, windowless bubble chamber concept simpler and more inexpensive in design is discussed here as well. The dark matter limits achieved with a 15 kg windowless chamber, larger than any previous COUPP chamber (2 kg, 4 kg), are presented. Evidence of the greater radiopurity of synthetic quartz compared to natural is presented using the data from this 15 kg device, the first chamber to be made from synthetic quartz. The effective reconstruction of the three-dimensional positions of bubbles in a highly distorted optical field, with ninety-degree bottom lighting similar to cloud chamber lighting, is demonstrated. Another innovation described in this thesis is the use of the sound produced by bubbles recorded by an array of piezoelectric sensors as the primary means of bubble detection. In other COUPP chambers, cameras have been used as the primary trigger. Previous work on bubble acoustic signature differentiation using piezos is built upon in order to further demonstrate the ability to discriminate between alpha- and neutron-induced events.

  18. Sonnen Solar Park GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    Sonnen Solar Park GmbH Co KG Jump to: navigation, search Name: Sonnen Solar Park GmbH & Co KG Place: Germany Sector: Solar Product: 1.75MW solar PV park in Bavaria, developed by...

  19. Kompass Corporate Finance GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    Kompass Corporate Finance GmbH Co KG Jump to: navigation, search Name: Kompass Corporate Finance GmbH & Co KG Place: Bremen, Germany Zip: 28195 Sector: Renewable Energy Product:...

  20. Rheinische Bio Ester GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    Rheinische Bio Ester GmbH Co KG Jump to: navigation, search Name: Rheinische Bio Ester GmbH & Co.KG Place: Neuss, North Rhine-Westphalia, Germany Zip: 41460 Product: Rheinische Bio...

  1. Wurth Solar GmbH Co KG Wuerth Solar | Open Energy Information

    Open Energy Info (EERE)

    Wurth Solar GmbH Co KG Wuerth Solar Jump to: navigation, search Name: Wurth Solar GmbH & Co KG (Wuerth Solar) Place: Schwabisch Hall, Baden-Wrttemberg, Germany Zip: D-74523...

  2. ABO Wind Biogas Sachsen Anhalt GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    Biogas Sachsen Anhalt GmbH Co KG Jump to: navigation, search Name: ABO Wind Biogas Sachsen-Anhalt GmbH & Co. KG Place: Wiesbaden, Saxony-Anhalt, Germany Zip: 65193 Product: Company...

  3. Green Energy Geotherm Power Fonds GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    Geotherm Power Fonds GmbH Co KG Jump to: navigation, search Name: Green Energy Geotherm Power Fonds GmbH & Co. KG Place: Hannover, Lower Saxony, Germany Zip: 30559 Sector:...

  4. Paradigma Energie und Umwelttechnik GmbH Co KG | Open Energy...

    Open Energy Info (EERE)

    Paradigma Energie und Umwelttechnik GmbH Co KG Jump to: navigation, search Name: Paradigma Energie- und Umwelttechnik GmbH & Co KG Place: Karlsbad, Germany Zip: 76307 Sector: Solar...

  5. Geothermie Unterhaching GmbH und Co KG | Open Energy Information

    Open Energy Info (EERE)

    Geothermie Unterhaching GmbH und Co KG Jump to: navigation, search Name: Geothermie Unterhaching GmbH und Co KG Place: Unterhaching, Bavaria, Germany Zip: 82008 Sector: Geothermal...

  6. Habdank PV Montagesysteme GmbH Co KG Habdank PV Mounting Systems...

    Open Energy Info (EERE)

    Germany Zip: 73037 Product: Germany-based manufacturer of mounting systems for PV installations. References: Habdank PV-Montagesysteme GmbH & Co KG Habdank PV Mounting...

  7. GEWI Planungs und Vertriebsgesellschaft mbH Co KG | Open Energy...

    Open Energy Info (EERE)

    Vertriebsgesellschaft mbH & Co KG Place: Husum Nordsee, Germany Zip: 25813 Sector: Wind energy Product: Wind energy project developer. References: GEWI Planungs- und...

  8. Bekon Energy Technologies GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    KG Place: Landshut, Bavaria, Germany Zip: 84034 Product: Planning and construction of biogas plants. Coordinates: 48.53657, 12.151775 Show Map Loading map......

  9. GEE Gesellschaft fuer Erneuerbare Energien mbH Co KG | Open Energy...

    Open Energy Info (EERE)

    Erneuerbare Energien mbH & Co.KG Place: Hamburg, Hamburg, Germany Zip: 20459 Product: Wood pelletsbriquettes supplier. Coordinates: 53.553345, 9.992455 Show Map Loading...

  10. Umwelt Windrad GmbH Co KG UWR | Open Energy Information

    Open Energy Info (EERE)

    UWR Jump to: navigation, search Name: Umwelt Windrad GmbH & Co KG (UWR) Place: Rheine, Germany Zip: 48431 Sector: Wind energy Product: Germany-based, subsidiary of Novera Energy...

  11. Joint Solar Silicon GmbH Co KG JSSI | Open Energy Information

    Open Energy Info (EERE)

    Name: Joint Solar Silicon GmbH & Co KG (JSSI) Place: Germany Sector: Solar Product: Joint venture between Degussa and SolarWorld for the production of solar-grade silicon on...

  12. MBE Mitteldeutsche BioEnergie GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    Saxony-Anhalt, Germany Zip: 6780 Product: MBE is a Bioethanol producer for the use as biofuel. References: MBE Mitteldeutsche BioEnergie GmbH & Co. KG1 This article is a stub....

  13. CO/sub 2/ gas dynamic laser with flow rate of 10 Kg/sec

    SciTech Connect (OSTI)

    Haitao, C.

    1982-08-01

    Using a supersonic technique in a 10 Kg/sec flow rate carbon dioxide gas dynamic laser unit to create a population inversion of the carbon dioxide particles, a 33,000 watt multiple mode continuous output was obtained. The power ratio reached 3000 watt sec/Kg. Single mode output was the P(20) branch with power of 11,200 watts and a beam diffuse angle of 4 seconds of radian. After eliminating the effect of stock wave, the diffuse angle can be reduced to 3 seconds of a radian. The results were below standards compared to those in foreign countries.

  14. Complete braided adsorbent for marine testing to demonstrate 3g-U/kg-adsorbent

    SciTech Connect (OSTI)

    Janke, Chris; Yatsandra, Oyola; Mayes, Richard; none,; Gill, Gary; Li-Jung, Kuo; Wood, Jordana; Sadananda, Das

    2014-04-30

    ORNL has manufactured four braided adsorbents that successfully demonstrated uranium adsorption capacities ranging from 3.0-3.6 g-U/kg-adsorbent in marine testing at PNNL. Four new braided and leno woven fabric adsorbents have also been prepared by ORNL and are currently undergoing marine testing at PNNL.

  15. Voith Siemens Hydro Power Generation GmbH Co KG | Open Energy...

    Open Energy Info (EERE)

    Map References: Voith Siemens Hydro Power Generation GmbH & Co KG&127;UNIQ7909a9dd6158f292-ref-0000150E-QINU&127; This article is a stub. You can help OpenEI by expanding it. Voith...

  16. GTS Duratek, Phase I Hanford low-level waste melter tests: 100-kg melter offgas report

    SciTech Connect (OSTI)

    Eaton, W.C.

    1995-11-01

    A multiphase program was initiated in 1994 to test commercially available melter technologies for the vitrification of the low-level waste (LLW) stream from defense wastes stored in underground tanks at the Hanford Site in southeastern Washington State. Phase 1 of the melter demonstration tests using simulated LLW was completed during fiscal year 1995. This document is the 100-kg melter offgas report on testing performed by GTS Duratek, Inc., in Columbia, Maryland. GTS Duratek (one of the seven vendors selected) was chosen to demonstrate Joule heated melter technology under WHC subcontract number MMI-SVV-384215. The document contains the complete offgas report on the 100-kg melter as prepared by Parsons Engineering Science, Inc. A summary of this report is also contained in the GTS Duratek, Phase I Hanford Low-Level Waste Melter Tests: Final Report (WHC-SD-WM-VI-027).

  17. Characterization of BG28 and KG3 filter glass for Drive Diagnostic Attenuators

    SciTech Connect (OSTI)

    Page, R H; Weiland, T; Folta, J

    2007-11-30

    BG28 and KG3 filter glasses were tested for use as attenuators in the NIF drive diagnostic (DrD) systems. Tests were performed in the Optical Sciences Laser facility with a 351 nm, 2-step, 3-nsec pulse at fluences ranging up to {approx} 1 J/cm{sup 2}. Single-shot measurements showed no solarization when the samples were allowed to relax for a week after exposure. KG3 filters exhibited no luminescence and no transient pulse distortion. BG28 filters luminesced appreciably and imposed a 'droop' (similar to 'square-pulse distortion') on the signals. The droop parameter is estimated at 0.50 {+-} 0.11 cm{sup 2}/J. Droop is explained in terms of known copper-doped-glass spectroscopy and kinetics (buildup of triplet-state populations, with excited-state absorption). Simulation of the distortion ({approx}1.6%) expected on a 1.8 MJ Haan pulse led to a minor redesign of the Drive Diagnostic with reduced fluence on the BG28 filters to reduce the droop distortion to 0.5%.

  18. Post service examination of turbomolecular pumps after stress testing with Kg-scale tritium throughput

    SciTech Connect (OSTI)

    Priester, F.; Roelling, M.

    2015-03-15

    Turbomolecular pumps (TMP) will be used with large amounts of tritium in future fusion machines like ITER, DEMO and in the KATRIN Experiment. In this work, a stress test of a large, magnetically levitated TMP (Leybold MAG W2800) with a tritium throughput of 1.1 kg over 384 days of operation was performed at TLK. After this, the pump was dismantled and the tritium uptake in several parts was deter-mined. Especially the non-metallic parts of the pump have absorbed large amounts of tritium and are most likely responsible for the observed pollution of the process gas. The total tritium uptake of the TMP was estimated with 0.1-1.1 TBq. No radiation-induced damages were found on the inner parts of the pump. The TMP showed no signs of functional limitations during the 384 days of operation. (authors)

  19. Milestone Report - Complete New Adsorbent Materials for Marine Testing to Demonstrate 4.5 g-U/kg Adsorbent

    SciTech Connect (OSTI)

    Janke, Christopher James; Das, Sadananda; Oyola, Yatsandra; Mayes, Richard T.; Saito, Tomonori; Brown, Suree; Gill, Gary; Kuo, Li-Jung; Wood, Jordana

    2014-08-01

    This report describes work on the successful completion of Milestone M2FT-14OR03100115 (8/20/2014) entitled, “Complete new adsorbent materials for marine testing to demonstrate 4.5 g-U/kg adsorbent”. This effort is part of the Seawater Uranium Recovery Program, sponsored by the U.S. Department of Energy, Office of Nuclear Energy, and involved the development of new adsorbent materials at the Oak Ridge National Laboratory (ORNL) and marine testing at the Pacific Northwest National Laboratory (PNNL). ORNL has recently developed two new families of fiber adsorbents that have demonstrated uranium adsorption capacities greater than 4.5 g-U/kg adsorbent after marine testing at PNNL. One adsorbent was synthesized by radiation-induced graft polymerization of itaconic acid and acrylonitrile onto high surface area polyethylene fibers followed by amidoximation and base conditioning. This fiber showed a capacity of 4.6 g-U/kg adsorbent in marine testing at PNNL. The second adsorbent was prepared by atom-transfer radical polymerization of t-butyl acrylate and acrylonitrile onto halide-functionalized round fibers followed by amidoximation and base hydrolysis. This fiber demonstrated uranium adsorption capacity of 5.4 g-U/kg adsorbent in marine testing at PNNL.

  20. First Dark Matter Search Results from a 4-kg CF$_3$I Bubble Chamber Operated in a Deep Underground Site

    SciTech Connect (OSTI)

    Behnke, E.; Behnke, J.; Brice, S.J.; Broemmelsiek, D.; Collar, J.I.; Conner, A.; Cooper, P.S.; Crisler, M.; Dahl, C.E.; Fustin, D.; Grace, E.; /Indiana U., South Bend /Fermilab

    2012-04-01

    New data are reported from the operation of a 4.0 kg CF{sub 3}I bubble chamber in the 6800 foot deep SNOLAB underground laboratory. The effectiveness of ultrasound analysis in discriminating alpha decay background events from single nuclear recoils has been confirmed, with a lower bound of >99.3% rejection of alpha decay events. Twenty single nuclear recoil event candidates and three multiple bubble events were observed during a total exposure of 553 kg-days distributed over three different bubble nucleation thresholds. The effective exposure for single bubble recoil-like events was 437.4 kg-days. A neutron background internal to the apparatus, of known origin, is estimated to account for five single nuclear recoil events and is consistent with the observed rate of multiple bubble events. This observation provides world best direct detection constraints on WIMP-proton spin-dependent scattering for WIMP masses >20 GeV/c{sup 2} and demonstrates significant sensitivity for spin-independent interactions.

  1. KG Group | Open Energy Information

    Open Energy Info (EERE)

    India Sector: Solar Product: Holding company for three yarn firms; setting up a solar thermal plant in Tamil Nadu. Coordinates: 11.01167, 76.98406 Show Map Loading map......

  2. Predicted Radiation Output from Several Kilograms of Plutonium...

    Office of Scientific and Technical Information (OSTI)

    Clell Jeffrey Jr. 1 ; Myers, Steven Charles 1 ; Temple, Brian Allen 1 ; Felsher, Paul D. 1 + Show Author Affiliations Los Alamos National Laboratory Publication Date:...

  3. Predicted Radiation Output from Several Kilograms of Plutonium...

    Office of Scientific and Technical Information (OSTI)

    1 ; Solomon, Clell Jeffrey Jr. 1 ; Myers, Steven Charles 1 ; Temple, Brian Allen 1 ; Felsher, Paul D. 1 + Show Author Affiliations Los Alamos National Laboratory...

  4. March market review. [Spot market prices for uranium (1993)

    SciTech Connect (OSTI)

    Not Available

    1993-04-01

    The spot market price for uranium in unrestricted markets weakened further during March, and at month end, the NUEXCO Exchange Value had fallen $0.15, to $7.45 per pound U3O8. The Restricted American Market Penalty (RAMP) for concentrates increased $0.15, to $2.55 per pound U3O8. Ample UF6 supplies and limited demand led to a $0.50 decrease in the UF6 Value, to $25.00 per kgU as UF6, while the RAMP for UF6 increased $0.75, to $5.25 per kgU. Nine near-term uranium transactions were reported, totalling almost 3.3 million pounds equivalent U3O8. This is the largest monthly spot market volume since October 1992, and is double the volume reported in January and February. The March 31 Conversion Value was $4.25 per kgU as UF6. Beginning with the March 31 Value, NUEXCO now reports its Conversion Value in US dollars per kilogram of uranium (US$/kgU), reflecting current industry practice. The March loan market was inactive with no transactions reported. The Loan Rate remained unchanged at 3.0 percent per annum. Low demand and increased competition among sellers led to a one-dollar decrease in the SWU Value, to $65 per SWU, and the RAMP for SWU declined one dollar, to $9 per SWU.

  5. EA-1123: Transfer of Normal and Low-Enriched Uranium Billets to the United Kingdom, Hanford Site, Richland, Washington

    Broader source: Energy.gov [DOE]

    This EA evaluates the environmental impacts of the proposal to transfer approximately 710,000 kilograms (1,562,000 pounds) of unneeded normal and low-enriched uranium to the United Kingdom; thus,...

  6. Milestone Report - Demonstrate Braided Material with 3.5 g U/kg Sorption Capacity under Seawater Testing Condition (Milestone M2FT-15OR0310041 - 1/30/2015)

    SciTech Connect (OSTI)

    Janke, Christopher James; Das, Sadananda; Oyola, Yatsandra; Mayes, Richard T; Gill, Gary; Kuo, Li-Jung; Wood, Jordana

    2015-01-01

    This report describes work on the successful completion of Milestone M2FT-15OR0310041 (1/30/2015) entitled, Demonstrate braided material with 3.5 g U/kg sorption capacity under seawater testing condition . This effort is part of the Seawater Uranium Recovery Program, sponsored by the U.S. Department of Energy, Office of Nuclear Energy, and involved the development of new adsorbent braided materials at the Oak Ridge National Laboratory (ORNL) and marine testing at the Pacific Northwest National Laboratory (PNNL). ORNL has recently developed four braided fiber adsorbents that have demonstrated uranium adsorption capacities greater than 3.5 g U/kg adsorbent after marine testing at PNNL. The braided adsorbents were synthesized by braiding or leno weaving high surface area polyethylene fibers and conducting radiation-induced graft polymerization of itaconic acid and acrylonitrile monomers onto the braided materials followed by amidoximation and base conditioning. The four braided adsorbents demonstrated capacity values ranging from 3.7 to 4.2 g U/kg adsorbent after 56 days of exposure in natural coastal seawater at 20 oC. All data are normalized to a salinity of 35 psu.

  7. Melter Pours 10 Millionth Pound of Glass | Department of Energy

    Office of Environmental Management (EM)

    Events Meetings & Events OE provides information on an ongoing basis about meetings and events of interest to people involved in issues related to grid modernization, energy assurance, and electricity policy. Listed below are upcoming events and meetings in chronological order. Information is also available about past events and conferences. PSERC webinar: Physical and Cyber Infrastructure Supporting the Future Grid - May 3, 2016, 2-3 p.m. ET- Summarizing findings from the PSERC/NSF

  8. Leonhard Kurz GmbH CO KG | Open Energy Information

    Open Energy Info (EERE)

    is an international supplier of hot stamping technology, and researches and developers polymer electronic technology with some PV applications. Coordinates: 49.65048, 8.78048...

  9. Germania Windpark GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    project developer, covering site acquisition, planning, engineering requirements, marketing and service. Coordinates: 52.278749, 7.434676 Show Map Loading map......

  10. Bernt Lorentz GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    Henstedt-Ulzburg, Germany Zip: D-24558 Sector: Solar Product: German manufacturer of solar tracking devices, water pumps, and related electronic and hydraulic components....

  11. Fichtner GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    large scale projects in the infrastructure sector. Leading consultant for Solar Thermal Electricity Generation (STEG) projects. Coordinates: 48.767675, 9.171925 Show Map...

  12. SSB Antriebstechnik GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    for wind turbines including motors, gearboxes, control and switchgear and their maintenance. Coordinates: 52.323136, 7.347278 Show Map Loading map... "minzoom":false,"map...

  13. MT Energie GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    Saxony, Germany Zip: 27404 Sector: Services Product: MT-Energie provides both turn-key biogas plants and related components and services. Coordinates: 53.295765, 9.27964 Show...

  14. Property:Dry Mass (kg) | Open Energy Information

    Open Energy Info (EERE)

    this property. M MHK TechnologiesAirWEC + 1.85 + MHK TechnologiesCanal Power + Variable + MHK TechnologiesITRI WEC + 63700 + MHK TechnologiesPLAT-O + 20000 + MHK...

  15. Mann Naturenergie GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    Biofuels, Renewable Energy Product: Mann Naturenergie is engaged in renewable energy production and distribution. It offers biofuels like wood chips, wood briquettes or...

  16. GEE Energy GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    Place: Hamburg, Germany Zip: 20459 Sector: Biomass Product: Biomass trader delivering wood pellets, wood and bark briquettes to Germany, Scandinavia, Austria, Italy and...

  17. Pellet property requirements for future blast-furnace operations and other new ironmaking processes

    SciTech Connect (OSTI)

    Agrawal, A.K.; Oshnock, T.W.

    1995-12-01

    The requirements for the physical, chemical and metallurgical properties of pellets have continued to become more stringent as blast-furnace productivity and coke rate have been rapidly improved during the last decade. In addition, the age and deterioration of the North American coke batteries, the lack of capital to sufficiently rebuild them, and the threat of increasingly more stringent environmental controls for the coke batteries has forced North American ironmakers to begin implementing pulverized coal injection to minimize the coke requirements for the blast furnace and to seriously investigate developing other ironmaking processes that use coal instead of coke. Therefore, the next major step in North American ironmaking has included injecting pulverized coal (PC) at 200 kilograms per ton of hot metal (kg/ton) [400 pounds per net ton of hot metal (lb/NTHM)] or greater which will result in the coke rate decreasing to less than 300 kg/ton (600 lb/NTHM) or less. As a result, the pellets will spend more time in the furnace and will be required to support more total weight. Pellets can also be a major iron unit source for other cokeless ironmaking processes such as the COREX process or the AISI direct ironmaking process. This paper will explore the pellet property requirements for future blast-furnace operations and cokeless ironmaking processes.

  18. Stabilization and solidification of chromium-contaminated soil

    SciTech Connect (OSTI)

    Cherne, C.A.; Thomson, B.M.; Conway, R.

    1997-11-01

    Chromium-contaminated soil is a common environmental problem in the United States as a result of numerous industrial processes involving chromium. Hexavalent chromium [Cr(VI)] is the species of most concern because of its toxicity and mobility in groundwater. One method of diminishing the environmental impact of chromium is to reduce it to a trivalent oxidation state [Cr(III)], in which it is relatively insoluble and nontoxic. This study investigated a stabilization and solidification process to minimize the chromium concentration in the Toxicity Characteristic Leaching Procedure (TCLP) extract and to produce a solidified waste form with a compressive strength in the range of 150 to 300 pounds per square inch (psi). To minimize the chromium in the TCLP extract, the chromium had to be reduced to the trivalent oxidation state. The average used in this study was an alluvium contaminated with chromic and sulfuric acid solutions. The chromium concentration in the in the in situ soil was 1212 milligrams per kilogram (mg/kg) total chromium and 275 mg/kg Cr(VI). The effectiveness of iron, ferrous sulfate to reduce Cr(VI) was tested in batch experiments.

  19. NNSA Livermore Field Office donates over 4,000 pounds of food...

    National Nuclear Security Administration (NNSA)

    food pantries and other local groups in support of the 2015 Feds Feed Families campaign. ... Oct 9, 2015 at 9:00 am Blog archive April 2016 (12) March 2016 (28) February 2016 (21) ...

  20. Idaho Crews Overcome Challenges to Safely Dispose 1-Million-Pound Hot Cell

    Broader source: Energy.gov [DOE]

    American Recovery and Reinvestment Act cleanup crews at the Idaho site recently disposed of a hot cell as heavy as nine fully loaded Boeing 737s.

  1. Microsoft PowerPoint - Reporting Small Quantities to NMMSS_Brian...

    National Nuclear Security Administration (NNSA)

    Reportable Units DOE-owned Other Materials: - Enriched Lithium Kilograms Li - Deuterium 0.1 kg D 2 - Pu-242 Grams Pu, Grams Pu-242 (>20% Pu-242 by weight) - Americium-241 Grams ...

  2. Property:PotentialBiopowerSolidMass | Open Energy Information

    Open Energy Info (EERE)

    for a place. Use this type to express a quantity of magnitude, or an object's resistance to acceleration. The default unit is the kilogram (kg). http:en.wikipedia.org...

  3. Property:PotentialBiopowerGaseousMass | Open Energy Information

    Open Energy Info (EERE)

    for a place. Use this type to express a quantity of magnitude, or an object's resistance to acceleration. The default unit is the kilogram (kg). http:en.wikipedia.org...

  4. DRAFT

    National Nuclear Security Administration (NNSA)

    Tons (short) Acres 0.0040469 Square kilometers Square miles 2.59 Square kilometers Square feet 0.092903 Square meters Tons/acre 0.5999 Kilograms/sq. meter Parts/million 1 a Milligrams/liter Parts/billion 1 a Micrograms/liter Parts/trillion 1 a Micrograms/cu. meter Pounds/cu. ft. 0.016018 Grams/cu. centimeter Pounds/cu. ft. 16,025.6 Grams/cu. meter Inches 2.54 Centimeters Feet 0.3048 Meters Inches 25,400 Micrometers Inches 25.40 Millimeters Miles 1.6093 Kilometers Degrees F - 32 0.55556 Degrees C

  5. Microsoft Word - KCP Final EA Draft 042913 CLEAN for Concurrence-R2.docx

    National Nuclear Security Administration (NNSA)

    Tons (short) Acres 0.0040469 Square kilometers Square miles 2.59 Square kilometers Square feet 0.092903 Square meters Tons/acre 0.5999 Kilograms/sq. meter Parts/million 1 a Milligrams/liter Parts/billion 1 a Micrograms/liter Parts/trillion 1 a Micrograms/cu. meter Pounds/cu. ft. 0.016018 Grams/cu. centimeter Pounds/cu. ft. 16,025.6 Grams/cu. meter Inches 2.54 Centimeters Feet 0.3048 Meters Inches 25,400 Micrometers Inches 25.40 Millimeters Miles 1.6093 Kilometers Degrees F - 32 0.55556 Degrees C

  6. Ulrich Wiesner > Spencer T. Olin Professor of Engineering

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Nuclear Security Administration US, Kazakhstan Cooperate to Eliminate Highly Enriched Uranium January 07, 2015 WASHINGTON D.C - The Department of Energy's National Nuclear Security Administration (DOE/NNSA) announced today the removal of 36 kilograms (approximately 80 pounds) of highly enriched uranium (HEU) spent fuel from the Institute of Nuclear Physics (INP) in Almaty, Kazakhstan. The HEU was transported via two air shipments to a secure facility in Russia for permanent disposition. This

  7. russia | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    russia NNSA Partnership Successfully Removes All Remaining HEU from Uzbekistan WASHINGTON, DC - Today, the Department of Energy's National Nuclear Security Administration (DOE/NNSA) announced the successful return of the final 5 kilograms (approximately 11 pounds) of highly enriched uranium (HEU) spent fuel from the IIN-3M "Foton" research reactor in Tashkent, Uzbekistan to... US, Kazakhstan Cooperate to Eliminate Highly Enriched Uranium WASHINGTON D.C - The Department of Energy's

  8. request.pdf

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    removal US, Kazakhstan Cooperate to Eliminate Highly Enriched Uranium WASHINGTON D.C - The Department of Energy's National Nuclear Security Administration (DOE/NNSA) announced today the removal of 36 kilograms (approximately 80 pounds) of highly enriched uranium (HEU) spent fuel from the Institute of Nuclear Physics (INP) in Almaty, Kazakhstan. The HEU was

    render safe Nuclear Forensics The National Technical Nuclear Forensics (NTNF) program is a Homeland Security Council and National Security

  9. NNSA Partnership Successfully Removes All Remaining HEU from Uzbekistan |

    National Nuclear Security Administration (NNSA)

    National Nuclear Security Administration Partnership Successfully Removes All Remaining HEU from Uzbekistan September 29, 2015 WASHINGTON, DC - Today, the Department of Energy's National Nuclear Security Administration (DOE/NNSA) announced the successful return of the final 5 kilograms (approximately 11 pounds) of highly enriched uranium (HEU) spent fuel from the IIN-3M "Foton" research reactor in Tashkent, Uzbekistan to Russia. This is the eighth shipment of HEU from Uzbekistan

  10. HYDROGEN STORAGE SOLUTIONS IN SUPPORT OF DOD WARFIGHTER PORTABLE POWER APPLICATIONS

    SciTech Connect (OSTI)

    Motyka, T.

    2009-01-06

    From Personal Digital Assistants (PDAs) to cell phones our high-tech world, today, is demanding smaller, lighter weight and higher capacity portable power devices. Nowhere has this personal power surge been more evident than in today's U.S Warfighter. The modern Warfighter is estimated to carry from 65 to 95 pounds of supplies in the field with over 30 pounds of this dedicated to portable power devices. These devices include computer displays, infrared sights, Global Positioning Systems (GPS), night vision and a variety of other sensor technologies. Over 80% of the energy needed to power these devices comes from primary (disposable) batteries. It is estimated that a brigade will consume as much as 7 tons of batteries in a 72 hour mission at a cost of $700,000. A recent comprehensive study on the energy needs of the future warrior published by the National Academy of Science in 2004 made a variety of recommendations for average power systems from 20 to 1,000 watts. For lower power systems recommendations included pursuing science and technology initiatives focused on: (1) 300 watt-hours per kilogram (Wh/kg) secondary battery technologies; (2) smart hybrids; and (3) fuel cells (with greater than 6 wt% hydrogen storage). Improved secondary (rechargeable) batteries may be the ideal solution for military power systems due to their ease of use and public acceptance. However, a 3X improvement in their specific energy density is not likely anytime soon. Today's Lithium Ion batteries, at about 150 Wh/kg, fall well short of the energy density that is required. Future battery technology may not be the answer since many experts do not predict more than a 2X improvement in Lithium battery systems over the next 10 years. That is why most auto companies have abandoned all electric vehicles in favor of fuel cells and hybrid vehicles. Fuel cells have very high specific energy densities but achieving high energy values will depend on the energy density and the storage method of its fuel. Improved methods of safely and efficiently storing larger amounts of hydrogen will be a key development area for portable fuel cell power systems. Despite their high potential energy, fuel cells exhibit low power densities. That is why many systems today are going hybrid. Hybrid systems typically combine low energy and high power components with high energy and low power components. Typical configurations include capacitors and fuel cells or batteries and fuel cells. If done correctly, a hybrid system often can have both high energy and high power density even higher than any of the individual components.

  11. Process steam production from cotton gin trash

    SciTech Connect (OSTI)

    LePori, W.A.; Carney, D.B.; Lalk, T.R.; Anthony, R.G.

    1981-01-01

    A steam producing system based on fluidized-bed gasification of biomass materials is discussed. Limited experimental results are discussed and show that steam has been produced at rates of 334.3 kg/hr. (737 lbs/hr.) with 2.8 kg of stream produced for each kilogram of cotton gin trash (2.8 lb/lb.). ref.

  12. Geek-Up: 350,000 Pounds of Paper, 30,000 Particle Beams and 14 Days in Flight

    Broader source: Energy.gov [DOE]

    Did you know that right now, across the globe, particle beams from some 30,000 accelerators are at work doing everything from diagnosing and treating disease to powering industrial processes?

  13. KSP Kluenemann Solar Projekt GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    Emsbren, Lower Saxony, Germany Zip: 48488 Product: Developer of a 3.4MW roof-mounted photovoltaic system in Zwickau, Saxony. References: KSP Kluenemann Solar-Projekt GmbH &...

  14. Offshore Burger Windpark Butendiek GmbH Co KG | Open Energy Informatio...

    Open Energy Info (EERE)

    Husum, Germany Zip: 25813 Sector: Wind energy Product: Developing the 240MW Butendiek offshore wind farm. Coordinates: 45.799479, -121.486901 Show Map Loading map......

  15. KvH Projekt GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    Zip: D-20259 Sector: Biomass, Solar, Wind energy Product: Project developer in wind, solar, biomass and smart architecture. Coordinates: 53.553345, 9.992455 Show Map Loading...

  16. PV Eiwa Systemtechnik GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    Germany Zip: 94447 Product: Germany-based manufacturer of fixed mounting systems and single-axis tracking for PV modules. Coordinates: 48.778312, 12.871223 Show Map...

  17. Reis Robotics GmbH Co KG Maschinenfabrik | Open Energy Information

    Open Energy Info (EERE)

    63785 Product: German manufacturer of industrial robots, robot controls, and turnkey automation systems. Coordinates: 41.839718, -75.016041 Show Map Loading map......

  18. V

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Uzbekistan NNSA Partnership Successfully Removes All Remaining HEU from Uzbekistan WASHINGTON, DC - Today, the Department of Energy's National Nuclear Security Administration (DOE/NNSA) announced the successful return of the final 5 kilograms (approximately 11 pounds) of highly enriched uranium (HEU) spent fuel from the IIN-3M "Foton" research reactor in Tashkent, Uzbekistan to

    > 111 \il :^ a. \ii 1 1 < z a. 0 u. J < U iL 0 > h 0) or UJ > z D UCRL- 1 5 1 0

  19. Characterization of mercury, arsenic, and selenium in the product streams of the Pacific Northwest Laboratory 6-kg retort

    SciTech Connect (OSTI)

    Olsen, K.B.; Evans, J.C.; Sklarew, D.S.; Girvin, D.C.; Nelson, C.L.; Lepel, E.A.; Robertson, D.E.; Sanders, R.W.

    1985-12-01

    The objective of this program is to determine how retorting process parameters affect the partitioning of Hg, As, Se, and Cd from raw oil shale to spent shale, shale oil, retort water, and offgas. For each of the elements, the objective of this study is to (1) determine the distribution coefficients for each product stream; (2) identify the chemical forms in water, gas, and oil streams, with particular emphasis on inorganic or organometallic species known to be or suspected of being carcinogenic, toxic, or otherwise harmful; (3) investigate the mechanism(s) responsible for mobilization into each product stream for toxic or labile chemical forms identified in item 2 are mobilized into each product stream; and (4) the effect of retorting rate, maximum retorting temperature, and retorting atmosphere on items 1 and 3. A Green River shale from Colorado and a New Albany shale from Kentucky were heated at 1 to 2/sup 0/C/min and at 10/sup 0/C/min to maximum temperatures of 500 and 750/sup 0/C under a nitrogen sweep gas. The product streams were analyzed using a variety of methods including Zeeman atomic absorption spectroscopy, microwave-induced helium plasma spectroscopy, x-ray fluorescence, instrumental neutron activation analysis, high-pressure liquid and silica gel column chromatography, and mercury cold vapor atomic absorption. The results obtained using these analytical methods indicate that the distribution of mercury, arsenic, and selenium in the product stream is a function of oil shale type, heating rates, and maximum retorting temperatures. 11 refs., 27 figs., 5 tabs.

  20. April market review. [Spot market prices for uranium (1993)

    SciTech Connect (OSTI)

    Not Available

    1993-05-01

    The spot market price for uranium outside the USA weakened further during April, and at month end, the NUEXCO Exchange Value had fallen $0.35, to $7.10 per pound U3O8. This is the lowest Exchange Value observed in nearly twenty years, comparable to Values recorded during the low price levels of the early 1970s. The Restricted American Market Penalty (RAMP) for concentrates increased $0.40, to $2.95 per pound U3O8. Transactions for significant quantities of uranium concentrates that are both deliverable in and intended for consumption in the USA could have been concluded on April 30 at $10.05 per pound U3O8, up $0.05 from the sum of corresponding March Values. Four near-term concentrates transactions were reported, totalling nearly 1.5 million pounds equivalent U3O8. One long-term sale was reported. The UF6 Value also declined, as increased competition among sellers led to a $0.50 decrease, to $24.50 per kgU as UF6. However, the RAMP for UF6 increased $0.65, to $5.90 per kgU as UF6, reflecting an effective US market level of $30.40 per kgU. Two near term transactions were reported totalling approximately 1.1 million pounds equivalent U3O8. In total, eight uranium transactions totalling 28 million pounds equivalent U3O8 were reported, which is about average for April market activity.

  1. Development of a plasma arc system for the destruction of U.S. Department of Defense hazardous waste

    SciTech Connect (OSTI)

    Sartwell, B.D.; Gehrman, F.H. Jr.; Telfer, T.R.

    1999-07-01

    The Naval Base, Norfolk, located in the northern portion of the city of Norfolk, Virginia, is the world's largest naval base and home of the Atlantic Fleet. Activities at the naval base generate approximately 1.4 million kilograms (3.0 million pounds) of industrial waste (hazardous and non-hazardous) annually. Significant components of the waste stream include used paint, cleaning rags, cleaning compounds, solvents, and other chemicals used in industrial operations. The costs of disposing of this waste are significant and are currently over $4 million annually, representing an average of $3.30 per kilogram ($1.50 per pound). Plasma arc technology has been identified as having the potential to cost-effectively treat and destroy various types of waste materials, including contaminated soil, ordnance, pyrotechnics, and low-level radioactive waste. There are currently several pilot-scale plasma arc units being tested in the United States, but at present there are no fully-permitted production-scale units in operation. In July 1995 a project was awarded to the Naval Research Laboratory and Norfolk Naval Base under the DOD Environmental Security Technology Certification Program with the objective of establishing a production scale demonstration plasma arc hazardous waste treatment facility (PAHWTF) at the Naval Base that would be capable of destroying both solid and liquid waste on a production basis and obtaining operational data necessary to determine the cost effectiveness of the process. This paper provides a detailed description of the PAHWTF, which was designed and built by Retech in Ukiah, CA, and also provides results of treatability tests. Information is also provided on the status of an Environmental Impact Statement and of RCRA Research, Development, and Demonstration, and air permits.

  2. May market review. [Spot market prices for uranium (1993)

    SciTech Connect (OSTI)

    Not Available

    1993-06-01

    Seven uranium transactions totalling nearly three million pounds equivalent U3O8 were reported during May, but only two, totalling less than 200 thousand pounds equivalent U3O8, involved concentrates. As no discretionary buying occurred during the month, and as near-term supply and demand were in relative balance, prices were steady, while both buyers and sellers appeared to be awaiting some new market development to signal the direction of future spot-market prices. The May 31, 1993, Exchange Value and the Restricted American market Penalty (RAMP) for concentrates were both unchanged at $7.10, and $2.95 per pound U3O8, respectively. NUEXCO's judgement was that transactions for significant quantities of uranium concentrates that were both deliverable in and intended for consumption in the USA could have been concluded on May 31 at $10.05 per pound U3O8. Two near-term concentrate transactions were reported in which one US utility purchased less than 200 thousand pounds equivalent U3O8 from two separate sellers. These sales occurred at price levels at or near the May 31 Exchange Value plus RAMP. No long-term uranium transactions were reported during May. Consequently, the UF6 Value decreased $0.20 to $24.30 per kgU as UF6, reflecting some weakening of the UF6 market outside the USA.

  3. Assessing the credibility of the calorific value of municipal solid waste

    SciTech Connect (OSTI)

    Churney, K.L.; Domalski, E.S.; Ledford, A.E.; Colbert, J.C.; Bruce, S.S.; Buckley, T.J.; Paule, R.C.; Reilly, M.L.

    1984-02-01

    A study has been made at the National Bureau of Standards to establish the limits of reliability of the calorific value of municipal solid waste (MSW) determined by the bomb calorimetric procedure currently used in commercial test laboratories. This procedure involves using gram-size samples derived from MSW that has been processed down to a particle size of 2 mm or less. Critics of the procedure argue that gram-size samples are too small to be representative of such a large quantity of so heterogeneous a material, and that processing MSW may also alter its composition. To test the bomb calorimetric procedure, a 2.5 kg capacity combustion flow calorimeter was designed and constructed for the determination of the enthalpies of combustion of kilogram-size samples of MSW in flowing oxygen near atmospheric pressure. Calorimetric data on processed MSW were obtained using both the kilogram-size flow and a gram-size bomb calorimeter. Intercomparison of results shows that the calorific value (on a dry basis) of gram-size test samples agrees, within the uncertainty of our experiments, with the corresponding values for their kilogram-size parent samples provided that the sample division technique used to obtain the gram-size samples is that described in this work. The average difference of the parent minus gram-size sample values (on a dry basis) is -0.1% with an imprecision (95% confidence interval) of +-1.1% of the mean calorific value. The effects of processing on sample composition were determined by intercomparison of flow calorimetric results on kilogram-size samples of processed and minimally processed MSW (150 mm or less particle size) that are nominally identical. The average difference of the unprocessed minus processed values (on a dry basis) is -0.5% with an imprecision (95% confidence interval) of +-2.9% of the mean calorific value. 7 references, 4 figures, 10 tables.

  4. Market values summary/August market review/current market data

    SciTech Connect (OSTI)

    1994-09-01

    This article is the August 1994 uranium market summary. There were 16 deals in the natural uranium market. The restricted exchange value dropped slightly to $9.10 per pound U3O8, while the unrestricted exchange value remained steady at $7.10. Similarly, the restricted UF6 value eased to $29.30 kgU as UF6, and the unrestricted value remained constant at $24.50. The restricted transaction value declined slightly to $9.15 per pound U3O8, while the unrestricted value increased to $7.15. Both active supply and demand increased by a comparable amount. The unrestricted SWU value was unchanged, but the restricted value decreased by a dollar to $86 per SWU.

  5. Market values summary/April market review/current market data

    SciTech Connect (OSTI)

    1994-05-01

    This article is the April 1994 uranium market summary. The near-term market was slow, with three near-term deals for concentrates and none for UF6. This was reflected in the decline of the concentrates restricted value $9.30 per pound U3O8 and the UF6 restricted value to $29.75 per kgU as UF6. In each market, the unrestricted value remained unchanged at $7.00 and $24.50 due to the lack of trades in the unrestricted market. Transaction values in both the restricted and unrestricted market were constant at $9.45 and $7.05 per pound U3O8. The restricted SWU value rose a dollar to $88 per SWU, and the unrestricted SWU value remained steady at $67 per SWU. Active demand continued to decrease, while active supply increased.

  6. U.S. Uranium Reserves Estimates

    Gasoline and Diesel Fuel Update (EIA)

    2. U.S. Forward-Cost Uranium Reserves by Mining Method, Year-End 2008 Mining Method 50 per pound 100 per pound Ore (million tons) Gradea (percent U3O8) U3O8 (million pounds) Ore...

  7. Market values summary/October market review/current market data

    SciTech Connect (OSTI)

    1993-11-01

    This article is the October 1993 uranium market summary. In spite of the substantial quantity of material that moved through the unrestricted market during this period, the unrestricted exchange value remained constant at $6.90 per pound U3O8, and the unrestricted value dipped to $10.15. There were four deals in the concentrates market during this period. Both the restricted and the unrestricted UF6 values remained constant at $31.75 and $24.75 per kgU as UF6 respectively, as did the restricted and unrestricted SWU values ($82 and $68 respectively). Active supply increased, while active demand decreased.

  8. N.J. DEP recognizes PPPL as state's top environmental steward...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    grounds to celebrate Earth Week last month. Some 32 volunteers collected 350 pounds of trash and 35 pounds of leaves for composting. PPPL's composting and recycling efforts...

  9. U. S. monthly coal production

    Gasoline and Diesel Fuel Update (EIA)

    3. U.S. Uranium Reserves by Forward-Cost Category, Year-End 1993-2008 (Million Pounds U3O8) Year Forward-cost Category Up to 30 per pound Up to 50 per pound Up to 100 per pound...

  10. 2015 Domestic Uranium Production Report

    U.S. Energy Information Administration (EIA) Indexed Site

    Domestic Uranium Production Report 2015 Domestic Uranium Production Report Release Date: May 5, 2016 Next Release Date: May 2017 million pounds U 3 O 8 $0 to $30 per pound $0 to $50 per pound $0 to $100 per pound $0 to $30 per pound $0 to $50 per pound $0 to $100 per pound Properties with Exploration Completed, Exploration Continuing, and Only Assessment Work W W 154.6 24.3 W 151.6 Properties Under Development for Production and Development Drilling W 38.2 W W 38.2 W Mines in Production W 19.2 W

  11. 2015 Domestic Uranium Production Report

    U.S. Energy Information Administration (EIA) Indexed Site

    10. Uranium reserve estimates at the end of 2014 and 2015" "million pounds U3O8" ,"End of 2014",,,"End of 2015" "Uranium Reserve Estimates1 by Mine and Property Status, Mining Method, and State(s)","Forward Cost 2" ,"$0 to $30 per pound","$0 to $50 per pound","$0 to $100 per pound","$0 to $30 per pound","$0 to $50 per pound","$0 to $100 per pound" "Properties with Exploration

  12. Environmental assessment: Transfer of normal and low-enriched uranium billets to the United Kingdom, Hanford Site, Richland, Washington

    SciTech Connect (OSTI)

    1995-11-01

    Under the auspices of an agreement between the U.S. and the United Kingdom, the U.S. Department of Energy (DOE) has an opportunity to transfer approximately 710,000 kilograms (1,562,000 pounds) of unneeded normal and low-enriched uranium (LEU) to the United Kingdom; thus, reducing long-term surveillance and maintenance burdens at the Hanford Site. The material, in the form of billets, is controlled by DOE`s Defense Programs, and is presently stored as surplus material in the 300 Area of the Hanford Site. The United Kingdom has expressed a need for the billets. The surplus uranium billets are currently stored in wooden shipping containers in secured facilities in the 300 Area at the Hanford Site (the 303-B and 303-G storage facilities). There are 482 billets at an enrichment level (based on uranium-235 content) of 0.71 weight-percent. This enrichment level is normal uranium; that is, uranium having 0.711 as the percentage by weight of uranium-235 as occurring in nature. There are 3,242 billets at an enrichment level of 0.95 weight-percent (i.e., low-enriched uranium). This inventory represents a total of approximately 532 curies. The facilities are routinely monitored. The dose rate on contact of a uranium billet is approximately 8 millirem per hour. The dose rate on contact of a wooden shipping container containing 4 billets is approximately 4 millirem per hour. The dose rate at the exterior of the storage facilities is indistinguishable from background levels.

  13. Analysis on storage off-gas emissions from woody, herbaceous, and torrefied biomass

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Tumuluru, Jaya Shankar; Lim, C. Jim; Bi, Xiaotao T.; Kuang, Xingya; Melin, Staffan; Yazdanpanah, Fahimeh; Sokhansanj, Shahab

    2015-03-02

    Wood chips, torrefied wood chips, ground switchgrass, and wood pellets were tested for off-gas emissions during storage. Storage canisters with gas-collection ports were used to conduct experiments at room temperature of 20 °C and in a laboratory oven set at 40 °C. Commercially-produced wood pellets yielded the highest carbon monoxide (CO) emissions at both 20 and 40 °C (1600 and 13,000 ppmv), whereas torrefied wood chips emitted the lowest of about <200 and <2000 ppmv. Carbon dioxide (CO₂) emissions from wood pellets were 3000 ppmv and 42,000 ppmv, whereas torrefied wood chips registered at about 2000 and 25,000 ppmv, atmore » 20 and 40 °C at the end of 11 days of storage. CO emission factors (milligrams per kilogram of biomass) calculated were lowest for ground switchgrass and torrefied wood chips (2.68 and 4.86 mg/kg) whereas wood pellets had the highest CO of about 10.60 mg/kg, respectively, at 40 °C after 11 days of storage. In the case of CO₂, wood pellets recorded the lowest value of 55.46 mg/kg, whereas switchgrass recorded the highest value of 318.72 mg/kg. This study concludes that CO emission factor is highest for wood pellets, CO₂ is highest for switchgrass and CH₄ is negligible for all feedstocks except for wood pellets, which is about 0.374 mg/kg at the end of 11-day storage at 40 °C.« less

  14. Analysis on storage off-gas emissions from woody, herbaceous, and torrefied biomass

    SciTech Connect (OSTI)

    Tumuluru, Jaya Shankar; Lim, C. Jim; Bi, Xiaotao T.; Kuang, Xingya; Melin, Staffan; Yazdanpanah, Fahimeh; Sokhansanj, Shahab

    2015-03-02

    Wood chips, torrefied wood chips, ground switchgrass, and wood pellets were tested for off-gas emissions during storage. Storage canisters with gas-collection ports were used to conduct experiments at room temperature of 20 °C and in a laboratory oven set at 40 °C. Commercially-produced wood pellets yielded the highest carbon monoxide (CO) emissions at both 20 and 40 °C (1600 and 13,000 ppmv), whereas torrefied wood chips emitted the lowest of about <200 and <2000 ppmv. Carbon dioxide (CO₂) emissions from wood pellets were 3000 ppmv and 42,000 ppmv, whereas torrefied wood chips registered at about 2000 and 25,000 ppmv, at 20 and 40 °C at the end of 11 days of storage. CO emission factors (milligrams per kilogram of biomass) calculated were lowest for ground switchgrass and torrefied wood chips (2.68 and 4.86 mg/kg) whereas wood pellets had the highest CO of about 10.60 mg/kg, respectively, at 40 °C after 11 days of storage. In the case of CO₂, wood pellets recorded the lowest value of 55.46 mg/kg, whereas switchgrass recorded the highest value of 318.72 mg/kg. This study concludes that CO emission factor is highest for wood pellets, CO₂ is highest for switchgrass and CH₄ is negligible for all feedstocks except for wood pellets, which is about 0.374 mg/kg at the end of 11-day storage at 40 °C.

  15. Market values summary/February market overview/current market data

    SciTech Connect (OSTI)

    1994-03-01

    This article is the February 1994 uranium market summary. During this reporting period, there were six deals in the natural uranium market involving 2.5 Mlb equivalent U3O8. The restricted exchange value eased to $9.45 per pound U3O8, and the unrestricted value remained unchanged at $7.00. There two deals for uranium as UF6, and the restricted UF6 value decreased to $30.00 per kgU as UF6. The unrestricted UF6 value was unchanged at $24.50. There were no long-term deals during this period, but several utilities were evaluating offers for over 10 Mlb equivalent U3O8 for delivery through 2005. The unrestricted transaction value remained steady at $7.15 per pound U3O8, while the restricted value dropped slightly to $9.75. The unrestricted SWU value was unchanged at $68 per SWU, but the restricted value once again increased by a dollar to $86. Active uranium supply decreased slightly, while active demand increased considerably.

  16. Market values summary/May market review/current market data

    SciTech Connect (OSTI)

    1994-06-01

    This article is the May 1994 uranium market survey. In the spot concentrates market, there was only one new deal, and as a result, the restricted exchange value eased to $9.25 per pound U3O8. The unrestricted exchange value remained constant at $7.00. There were two deals in the UF6 spot market, and the restricted UF6 value decreased to $29.40 per kgU as UF6. The unrestricted UF6 value was unchanged. There were two deals in the long-term marketplace. The restricted transaction value declined to $9.40 per pound U3O8, and the unrestricted transaction value remained fixed at $7.05. There were three deals in the enrichment services market, and the restricted SWU value dropped to $87 per SWU, while the unrestricted SWU value remained constant at $67. Active uranium supply decreased this reporting period, while active demand increased. Supply continued to overwhelm demand, however.

  17. Titanium Metal Powder Production by the Plasma Quench Process

    SciTech Connect (OSTI)

    R. A. Cordes; A. Donaldson

    2000-09-01

    The goals of this project included the scale-up of the titanium hydride production process to a production rate of 50 kg/hr at a purity level of 99+%. This goal was to be achieved by incrementally increasing the production capability of a series of reactor systems. This methodic approach was designed to allow Idaho Titanium Technologies to systematically address the engineering issues associated with plasma system performance, and powder collection system design and performance. With quality powder available, actual fabrication with the titanium hydride was to be pursued. Finally, with a successful titanium production system in place, the production of titanium aluminide was to be pursued by the simultaneously injection of titanium and aluminum precursors into the reactor system. Some significant accomplishments of the project are: A unique and revolutionary torch/reactor capable of withstanding temperatures up to 5000 C with high thermal efficiency has been operated. The dissociation of titanium tetrachloride into titanium powder and HC1 has been demonstrated, and a one-megawatt reactor potentially capable of producing 100 pounds per hour has been built, but not yet operated at the powder level. The removal of residual subchlorides and adsorbed HC1 and the sintering of powder to form solid bodies have been demonstrated. The production system has been operated at production rates up to 40 pounds per hour. Subsequent to the end of the project, Idaho Titanium Technologies demonstrated that titanium hydride powder can indeed be sintered into solid titanium metal at 1500 C without sintering aids.

  18. PDRD (SR13046) TRITIUM PRODUCTION FINAL REPORT

    SciTech Connect (OSTI)

    Smith, P.; Sheetz, S.

    2013-09-30

    Utilizing the results of Texas A&M University (TAMU) senior design projects on tritium production in four different small modular reactors (SMR), the Savannah River National Laboratory’s (SRNL) developed an optimization model evaluating tritium production versus uranium utilization under a FY2013 plant directed research development (PDRD) project. The model is a tool that can evaluate varying scenarios and various reactor designs to maximize the production of tritium per unit of unobligated United States (US) origin uranium that is in limited supply. The primary module in the model compares the consumption of uranium for various production reactors against the base case of Watts Bar I running a nominal load of 1,696 tritium producing burnable absorber rods (TPBARs) with an average refueling of 41,000 kg low enriched uranium (LEU) on an 18 month cycle. After inputting an initial year, starting inventory of unobligated uranium and tritium production forecast, the model will compare and contrast the depletion rate of the LEU between the entered alternatives. This is an annual tritium production rate of approximately 0.059 grams of tritium per kilogram of LEU (g-T/kg-LEU). To date, the Nuclear Regulatory Commission (NRC) license has not been amended to accept a full load of TPBARs so the nominal tritium production has not yet been achieved. The alternatives currently loaded into the model include the three light water SMRs evaluated in TAMU senior projects including, mPower, Holtec and NuScale designs. Initial evaluations of tritium production in light water reactor (LWR) based SMRs using optimized loads TPBARs is on the order 0.02-0.06 grams of tritium per kilogram of LEU used. The TAMU students also chose to model tritium production in the GE-Hitachi SPRISM, a pooltype sodium fast reactor (SFR) utilizing a modified TPBAR type target. The team was unable to complete their project so no data is available. In order to include results from a fast reactor, the SRNL Technical Advisory Committee (TAC) ran a Monte Carlo N-Particle (MCNP) model of a basic SFR for comparison. A 600MWth core surrounded by a lithium blanket produced approximately 1,000 grams of tritium annually with a 13% enriched, 6 year core. This is similar results to a mid-1990’s study where the Fast Flux Test Facility (FFTF), a 400 MWth reactor at the Idaho National Laboratory (INL), could produce about 1,000 grams with an external lithium target. Normalized to the LWRs values, comparative tritium production for an SFR could be approximately 0.31 g-T/kg LEU.

  19. Data Release Report for Source Physics Experiments 2 and 3 (SPE-2 and SPE-3) Nevada National Security Site

    SciTech Connect (OSTI)

    Townsend, Margaret; Obi, Curtis

    2015-01-26

    The second Source Physics Experiment shot (SPE-2) was conducted in Nevada on October 25, 2011, at 1900:00.011623 Greenwich Mean Time (GMT). The explosive source was 997 kilograms (kg) trinitrotoluene (TNT) equivalent of sensitized heavy ammonium fuel oil (SHANFO) detonated at a depth of 45.7 meters (m). The third Source Physics Experiment shot (SPE-3) was conducted in Nevada on July 24, 2012, at 1800:00.44835 GMT. The explosive source was 905 kg TNT equivalent of SHANFO detonated at a depth of 45.8 m. Both shots were recorded by an extensive set of instrumentation that includes sensors both at near-field (less than 100 m) and far-field (100 m or greater) distances. The near-field instruments consisted of three-component accelerometers deployed in boreholes at 15, 46, and 55 m depths around the shot and a set of single-component vertical accelerometers on the surface. The far-field network was composed of a variety of seismic and acoustic sensors, including short-period geophones, broadband seismometers, three-component accelerometers, and rotational seismometers at distances of 100 m to 25 kilometers. This report coincides with the release of these data for analysts and organizations that are not participants in this program. This report describes the second and third Source Physics Experiment shots and the various types of near-field and far-field data that are available.

  20. Electrolyte Materials Available for Sampling | Argonne National...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Scaling to kilogram or larger scale can require substantial process modifications, and until that step is developed, economics, product consistency and quality are uncertain. The ...

  1. history

    National Nuclear Security Administration (NNSA)

    several contributions over SRS's history, including large-scale production of aluminum-lithium alloys; production of kilogram quantities of radioactive waste glass; materials...

  2. Defense Nuclear Nonproliferation

    National Nuclear Security Administration (NNSA)

    span>

    WASHINGTON D.C - The Department of Energy's National Nuclear Security Administration (DOENNSA) announced today the removal of 36 kilograms...

  3. ARM - Lesson Plans: Moving Water and Waves

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    container Water Approximately 2 kilograms of sand (optional) Electric fan or a hair dryer Stopwatch or watch with a second hand Important Points to Understand Everyday we see...

  4. DOE issues Finding of No Significant Impact for the Environmental...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    on Two Proposed Shipments of Commercial Nuclear Fuel to Idaho National Laboratory for ... to make two shipments of commercial nuclear fuel rods totaling 80 to 100 kilograms ...

  5. Table 7. Carbon intensity of the energy supply by State (2000...

    U.S. Energy Information Administration (EIA) Indexed Site

    Carbon intensity of the energy supply by State (2000-2011)" "kilograms of energy-related carbon dioxide per million Btu" ,,,"Change" ,,,"2000 to 2011"...

  6. Market values summary/October market review/current market data

    SciTech Connect (OSTI)

    1994-11-01

    This article is the October uranium market summary. During this period, volume increased to 2.2 Mlb U3O8 on the spot concentrates market. The unrestricted and restricted exchange values remained steady at $7.00 and $9.05 per pound U3O8 respectively. There were two UF6 deals during this period, and with supply more than adequate to meet the demand, the restricted UF6 price remained unchanged at $29.00 per kgU as UF6. The unrestricted value increased slightly to $24.50. The conversion value was unchanged, and the enrichment services market/prices weakened. Both active supply and demand decreased during this period.

  7. Market values summary/March market review/current market data

    SciTech Connect (OSTI)

    1994-04-01

    This article is the March 1993 uranium market summary. In the natural uranium and concentrates market, there were eight transactions. Both the restricted and unrestricted values were unchanged at $9.45 and $7.00 per pound of U3O8 respectively. In the UF6 market, there were three deals. Both restricted and unrestricted values were also unchanged at $30.00 and $24.50 per kgU as UF6 respectively. The restricted transaction value dropped slightly to $9.45, and the unrestricted value dropped to $7.05. In the enrichment services market, there were six deals reported, with the restricted SWU value rising to $87.00 and the unrestricted SWU value dropping to $67.00. Active uranium demand decreased considerably, while active supply increased.

  8. Market values summary/March market review/current market data

    SciTech Connect (OSTI)

    1995-04-01

    This article is the March 1995 uranium market summary. There were 14 near-term deals is natural uranium market for a total of 5.2 Mlb. The restricted exchange value moved upward to $11.75 per pound U3O8, and the unrestricted value rose to $7.35. The UF6 market was quite active, with 8 deals and with restricted and unrestricted prices for UF6 both up ($34.75 and $22.50 per kgU as UF6 respectively). The restricted and unrestricted transaction values also rose to $10.05 and $7.25 respectively. Enrichment services followed the overall trend, with increases to $92 and $78 per SWU. Active uranium supply dropped, as did active demand.

  9. Mercury Strategic Plan Outfall 200 Mercury Treatment Facility

    Office of Environmental Management (EM)

    more than 20 million pounds of mercury were used at Y-12 in a process that separated lithium isotopes for weapons production *Approximately 2 million pounds of mercury were ...

  10. Fact #556: February 2, 2009 Change in Material Content of Light...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The use of high and medium strength steel has increased from an average of 324 pounds per ... that same period while the use of stainless steel increased by only about 20 pounds. ...

  11. Word Pro - Untitled1

    U.S. Energy Information Administration (EIA) Indexed Site

    Million Pounds Uranium Oxide Concentrate Production 1985 1990 1995 2000 2005 2010 0 50 100 150 200 Million Pounds Uranium Oxide Total 1985 1990 1995 2000 2005 2010 0 10 20 30 40 50 ...

  12. Oak Ridge National Laboratory Environmental Management Portfolio...

    Office of Environmental Management (EM)

    challenges * More than 20 million pounds of mercury were used in early processing of lithium; over 700,000 pounds suspected to have been released to the environment * Four large...

  13. Bioventing approach to remediate a gasoline contaminated subsurface. Book chapter

    SciTech Connect (OSTI)

    Kampbell, D.H.; Wilson, J.T.; Griffin, C.J.

    1992-01-01

    Bioventing is a subsurface process using an air stream to enhance biodegradation of oily contaminants. Two pilot-scale bioventing systems were installed at a field site. Process operations began in October 1990. The field site is located at an air station. A spill in 1969 of about 100,000 kilograms aviation gasoline was caused by a broken underground transfer line. A major portion of the spilled product still persists as an oily-phase residue in a 80x360 meter plume. The subsurface is a uniform beach sand with the ground water level near five meters. Prior to startup of the venting systems, a grass cover was established and a nutrient solution was dispersed throughout the unsaturated subsurface. Subsurface air flow patterns are being determined with a tracer gas of sulfur hexafloride. Soil gas, core material, and underground water are being monitored to determine the extent of remediation. Objectives of the study are to demonstrate that surface emissions of gasoline are minimal, oily residue will be reduced to <100 mg fuel carbon/Kg core material, and the process will be applicable to full-scale remediation. Flow rate is based on a calculated residence time of 24 hours. Surface emission of fuel hydrocarbons have not exceeded 1 micrograms/liter soil gas.

  14. Research Reactor Preparations for the Air Shipment of Highly Enriched Uranium from Romania

    SciTech Connect (OSTI)

    K. J. Allen; I. Bolshinsky; L. L. Biro; M. E. Budu; N. V. Zamfir; M. Dragusin; C. Paunoiu; M. Ciocanescu

    2010-03-01

    In June 2009 two air shipments transported both unirradiated (fresh) and irradiated (spent) Russian-origin highly enriched uranium (HEU) nuclear fuel from two research reactors in Romania to the Russian Federation for conversion to low enriched uranium. The Institute for Nuclear Research at Pitesti (SCN Pitesti) shipped 30.1 kg of HEU fresh fuel pellets to Dimitrovgrad, Russia and the Horia Hulubei National Institute of Physics and Nuclear Engineering (IFIN-HH) shipped 23.7 kilograms of HEU spent fuel assemblies from the VVR S research reactor at Magurele, Romania, to Chelyabinsk, Russia. Both HEU shipments were coordinated by the Russian Research Reactor Fuel Return Program (RRRFR) as part of the U.S. Department of Energy Global Threat Reduction Initiative (GTRI), were managed in Romania by the National Commission for Nuclear Activities Control (CNCAN), and were conducted in cooperation with the Russian Federation State Corporation Rosatom and the International Atomic Energy Agency. Both shipments were transported by truck to and from respective commercial airports in Romania and the Russian Federation and stored at secure nuclear facilities in Russia until the material is converted into low enriched uranium. These shipments resulted in Romania becoming the 3rd country under the RRRFR program and the 14th country under the GTRI program to remove all HEU. This paper describes the research reactor preparations and license approvals that were necessary to safely and securely complete these air shipments of nuclear fuel.

  15. Nevada test site underground storage tank number 12-13-1: Nevada division of emergency management case number H931130E corrective action unit 450. Closure report

    SciTech Connect (OSTI)

    1997-01-01

    The project site was identified as an abandoned Underground Storage Tank (UST) to be closed under the Department of Energy/Nevada Operations Office (DOE/NV) Environmental Restoration Division (ERD) Program during Fiscal Year 1993. The United States Environmental Protection Agency (EPA) requires that before permanent closure is completed an assessment of the site must take place. The Nevada Division of Environmental Protection (NDEP) requires assessment and corrective actions for a petroleum substance in the soil which exceeds 100 milligrams per kilogram (mg/kg). Subsequent to the tank removal, a hydrocarbon release was identified at the site. The release was reported to the NDEP by DOE/NV on November 30, 1993. Nevada Division of Environmental Management (NDEM) Case Number H931130E was assigned. This final closure report documents the assessment and corrective actions taken for the hydrocarbon release identified at the site. The Notification of Closure, EPA Form 7530-1 dated March 22, 1994, is provided in Appendix A. A 45-day report documenting the notification for a hydrocarbon release was submitted to NDEP on April 6, 1994.

  16. Engineering-Scale Liquid Cadmium Cathode Experiments

    SciTech Connect (OSTI)

    D Vaden; B. R. Westphal; S. X. Li; T. A. Johnson; K. B. Davies; D. M. Pace

    2006-08-01

    Recovery of transuranic actinides (TRU) using electrorefining is a process being investigated as part of the Department of Energy (DOE) Advanced Fuel Cycle Initiative (AFCI). TRU recovery via electrorefining onto a solid cathode is very difficult as the thermodynamic properties of transuranics are not favourable for them to remain in the metal phase while significant quantities of uranium trichloride exist in the electrolyte. Theoretically, the concentration of transuranics in the electrolyte must be approximately 106 greater than the uranium concentration in the electrolyte to produce a transuranic deposit on a solid cathode. Using liquid cadmium as a cathode contained within a LiCl-KCl eutectic salt, the co-deposition of uranium and transuranics is feasible because the activity of the transuranics in liquid cadmium is very small. Depositing transuranics and uranium in a liquid cadmium cathode (LCC) theoretically requires the concentration of transuranics to be two to three times the uranium concentration in the electrolyte. Three LCC experiments were performed in an Engineering scale elecdtrorefiner, which is located in the argon hot cell of the Fuel Conditioning Facility at the Materials and Fuels Complex on the Idaho National Laboratory. Figure 1 contains photographs of the LCC assembly in the hot cell prior to the experiment and a cadmium ingot produced after the first LCC test. Figure 1. Liquid Cadmium Cathode (left) and Cadmium Ingot (right) The primary goal of the engineering-scale liquid cadmium cathode experiments was to electrochemically collect kilogram quantities of uranium and plutonium via a LCC. The secondary goal was to examine fission product contaminations in the materials collected by the LCC. Each LCC experiment used chopped spent nuclear fuel from the blanket region of the Experimental Breeder Reactor II loaded into steel baskets as the anode with the LCC containing 26 kg of cadmium metal. In each experiment, between one and two kilograms of heavy metal was collected in the LCC after passing an integrated current over 500 amp hours. Analysis of samples from the liquid cadmium cathode ingots showed detectable amounts of transuranics and rare-earth elements. Acknowledgements K. B. Davies and D. M. Pace for the mechanical and electrical engineering needed to prepare the equipment for the engineering-scale liquid cadmium cathode experiments.

  17. Data Release Report for Source Physics Experiments 2 and 3 (SPE-2 and SPE-3) Nevada National Security Site

    SciTech Connect (OSTI)

    Townsend, Margaret; Obi, Curtis

    2015-04-30

    The second Source Physics Experiment shot (SPE-2) was conducted in Nevada on October 25, 2011, at 1900:00.011623 Greenwich Mean Time (GMT). The explosive source was 997 kilograms (kg) trinitrotoluene (TNT) equivalent of sensitized heavy ammonium fuel oil (SHANFO) detonated at a depth of 45.7 meters (m). The third Source Physics Experiment shot (SPE-3) was conducted in Nevada on July 24, 2012, at 1800:00.44835 GMT. The explosive source was 905 kg TNT equivalent of SHANFO detonated at a depth of 45.8 m. Both shots were recorded by an extensive set of instrumentation that includes sensors both at near-field (less than 100 m) and far-field (100 m or greater) distances. The near-field instruments consisted of three-component accelerometers deployed in boreholes at 15, 46, and 55 m depths around the shot and a set of single-component vertical accelerometers on the surface. The far-field network was composed of a variety of seismic and acoustic sensors, including short-period geophones, broadband seismometers, three-component accelerometers, and rotational seismometers at distances of 100 m to 25 kilometers. This report coincides with the release of these data for analysts and organizations that are not participants in this program. This report describes the second and third Source Physics Experiment shots and the various types of near-field and farfield data that are available.This revised document includes reports on baseline shift corrections for the SPE-2 and SPE-3 shots that were missing from the original January 2015 version.

  18. Evaluation of Settler Tank Thermal Stability during Solidification and Disposition to ERDF

    SciTech Connect (OSTI)

    Stephenson, David E.; Delegard, Calvin H.; Schmidt, Andrew J.

    2015-03-30

    Ten 16-foot-long and 20-inch diameter horizontal tanks currently reside in a stacked 2×5 (high) array in the ~20,000-gallon water-filled Weasel Pit of the 105-KW Fuel Storage Basin on the US-DOE Hanford Site. These ten tanks are part of the Integrated Water Treatment System used to manage water quality in the KW Basin and are called “settler” tanks because of their application in removing particles from the KW Basin waters. Based on process knowledge, the settler tanks are estimated to contain about 124 kilograms of finely divided uranium metal, 22 kg of uranium dioxide, and another 55 kg of other radioactive sludge. The Sludge Treatment Project (STP), managed by CH2MHill Plateau Remediation Company (CHPRC) is charged with managing the settler tanks and arranging for their ultimate disposal by burial in ERDF. The presence of finely divided uranium metal in the sludge is of concern because of the potential for thermal runaway reaction of the uranium metal with water and the formation of flammable hydrogen gas as a product of the uranium-water reaction. Thermal runaway can be instigated by external heating. The STP commissioned a formal Decision Support Board (DSB) to consider options and provide recommendations to manage and dispose of the settler tanks and their contents. Decision criteria included consideration of the project schedule and longer-term deactivation, decontamination, decommissioning, and demolition (D4) of the KW Basin. The DSB compared the alternatives and recommended in-situ grouting, size-reduction, and ERDF disposal as the best of six candidate options for settler tank treatment and disposal. It is important to note that most grouts contain a complement of Portland cement as the binding agent and that Portland cement curing reactions generate heat. Therefore, concern is raised that the grouting of the settler tank contents may produce heating sufficient to instigate thermal runaway reactions in the contained uranium metal sludge.

  19. Propulsion engineering study for small-scale Mars missions

    SciTech Connect (OSTI)

    Whitehead, J.

    1995-09-12

    Rocket propulsion options for small-scale Mars missions are presented and compared, particularly for the terminal landing maneuver and for sample return. Mars landing has a low propulsive {Delta}v requirement on a {approximately}1-minute time scale, but at a high acceleration. High thrust/weight liquid rocket technologies, or advanced pulse-capable solids, developed during the past decade for missile defense, are therefore more appropriate for small Mars landers than are conventional space propulsion technologies. The advanced liquid systems are characterize by compact lightweight thrusters having high chamber pressures and short lifetimes. Blowdown or regulated pressure-fed operation can satisfy the Mars landing requirement, but hardware mass can be reduced by using pumps. Aggressive terminal landing propulsion designs can enable post-landing hop maneuvers for some surface mobility. The Mars sample return mission requires a small high performance launcher having either solid motors or miniature pump-fed engines. Terminal propulsion for 100 kg Mars landers is within the realm of flight-proven thruster designs, but custom tankage is desirable. Landers on a 10 kg scale also are feasible, using technology that has been demonstrated but not previously flown in space. The number of sources and the selection of components are extremely limited on this smallest scale, so some customized hardware is required. A key characteristic of kilogram-scale propulsion is that gas jets are much lighter than liquid thrusters for reaction control. The mass and volume of tanks for inert gas can be eliminated by systems which generate gas as needed from a liquid or a solid, but these have virtually no space flight history. Mars return propulsion is a major engineering challenge; earth launch is the only previously-solved propulsion problem requiring similar or greater performance.

  20. Office of Enterprise Assessments Review of the Los Alamos National...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Feedback Improvement Tracking System PMI Preventive Maintenance Instruction psi Pounds per Square ... The completed preventive and predictive maintenance forms required by ...

  1. Wise County, Virginia: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Appalachia, Virginia Big Stone Gap, Virginia Coeburn, Virginia Pound, Virginia St. Paul, Virginia Wise, Virginia Retrieved from "http:en.openei.orgwindex.php?titleWiseCo...

  2. EERE Success Story—New Jersey: Atlantic City Jitneys Running on Natural Gas

    Broader source: Energy.gov [DOE]

    EERE-funded project is estimated to reduce 1.76 million GGE/year and 607,364 pounds of carbon dioxide per year.

  3. c25.xls

    U.S. Energy Information Administration (EIA) Indexed Site

    per Building (million Btu) per Square Foot (thousand Btu) per Worker (million Btu) per Building (thousand dollars) per Square Foot (dollars) per Thousand Pounds (dollars) All...

  4. NNSA Conducts Experiment to Improve U.S. Ability to Detect Foreign...

    National Nuclear Security Administration (NNSA)

    The SPE-4 Prime experiment used a chemical explosive equivalent to 196 pounds of TNT in a contained, confined environment 286 feet below ground. Information gathered from this ...

  5. OREM Press Releases | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    18 years of operation and more than 35 million pounds of waste safely incinerated, the Toxic Substances Control Act (TSCA) Incinerator will shut down operations on December 2....

  6. http://ndep.nv.gov/bapc/capp/capp.html

    National Nuclear Security Administration (NNSA)

    CAPP regulates 40+ facilities handling nearly 30 Million Pounds of Highly Hazardous Substances State of Nevada Division of Environmental Protection Bureau of Air Pollution Control ...

  7. c26.xls

    U.S. Energy Information Administration (EIA) Indexed Site

    Btu) per Square Foot (thousand Btu) per Worker (million Btu) per Building (thousand dollars) per Square Foot (dollars) per Thousand Pounds (dollars) All Buildings...

  8. DOE - Office of Legacy Management -- General Electric Co - Shelbyville...

    Office of Legacy Management (LM)

    Compacted approximately 500 pounds of thorium (small pieces) into electrodes on 25 and ... Primary Radioactive Materials Handled: Thorium IN.07-1 Radiological Survey(s): Yes ...

  9. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    customers the fuel mix of its electricity production and the associated sulfur dioxide, nitrogen oxide, and carbon dioxide emissions emissions, expressed in pounds per 1000...

  10. Fuel Mix and Emissions Disclosure | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    customers the fuel mix of its electricity production and the associated sulfur dioxide, nitrogen oxide, and carbon dioxide emissions emissions, expressed in pounds per 1000...

  11. This Week In Petroleum Printer-Friendly Version

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    to raise the temperature of 1 pound of liquid water by 1 degree Fahrenheit at the temperature at which water has its greatest density (approximately 39 degrees...

  12. Nylon Carpet Recycling | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    currently in operation, ENR is drawing from over 40 carpet collection facilities across the nation and has collectively kept over 200 million pounds of carpet out of landfills. ...

  13. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    tax on a gallon equivalent basis. Alternative fuels include natural gas, propane, hydrogen, and hythane. A gallon equivalent is defined as 5.660 pounds (lbs.) of compressed...

  14. Bioenergy Technologies Office Conversion R&D Pathway: Whole Algae...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Microalgal biomass grown via autotrophic pathways is dewatered to 20% solids concentration. * The slurry of whole algae reacts in a pressure vessel (2000-3000 pounds per square ...

  15. Sandia National Laboratories: News

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    more... 39,000 Pounds of Ceiling Tiles Recycled December 21, 2010 - Read more... Sustainable Products at Fleet Services December 17, 2010 - Read more... Gold Standard:...

  16. Energy-Related Carbon Dioxide Emissions at the State Level, 2000...

    U.S. Energy Information Administration (EIA) Indexed Site

    8 Table 7. Carbon intensity by state (2000-2013) kilograms of energy-related carbon dioxide per million Btu Change (2000-2013) State 2000 2001 2002 2003 2004 2005 2006 2007 2008 ...

  17. Biological denitrification of high concentration nitrate waste

    DOE Patents [OSTI]

    Francis, Chester W.; Brinkley, Frank S.

    1977-01-01

    Biological denitrification of nitrate solutions at concentrations of greater than one kilogram nitrate per cubic meter is accomplished anaerobically in an upflow column having as a packing material a support for denitrifying bacteria.

  18. Secretary Steven Chu Remarks as Prepared for Delivery to the...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... The United States is aggressively pursuing a disarmament agenda. We call on others to ... We've also down-blended 700 kilograms of highly enriched uranium from civil nuclear ...

  19. EA-1255: Project Partnership Transportation of Foreign-Owned Enriched Uranium from the Republic of Georgia

    Broader source: Energy.gov [DOE]

    This EA evaluates the environmental impacts for the proposal to transport 5.26 kilograms of enriched uranium-23 5 in the form of nuclear fuel, from the Republic of Georgia to the United Kingdom.

  20. Final report on the developmental toxicity of ethylenediamine (CAS No. 107-15-3) in New Zealand white rabbits. Report for November-February 1992

    SciTech Connect (OSTI)

    Not Available

    1993-03-01

    Ethylenediamine (EDA) is a major industrial chemical with an estimated U.S. production of 64 million pounds in 1985. EDA is used as a chemical intermediate or solvent in manufacturing, as a paint thinner, and as a constituent of certain cosmetic, pharmaceutical and veterinary products. Based upon its widespread applications and the potential for exposure in pregnant women, EDA was evaluated for maternal and developmental toxicity using a laboratory animal model. Artificially-inseminated New Zealand White rabbits (26/group) were administered ethylenediamine (0, 10, 40 or 80 mg/kg/day) by gavage on gestational days (gd) 6 through 19. The doses administered were equivalent to 0, 22, 89 or 178 of EDA.2HC1. Maternal clinical signs, body weight, and food consumption were monitored at regular intervals throughout gestation. At termination (gd 30), the uterus was removed and examined to determine pregnancy status and to evaluate the number of resorptions, and dead or live fetuses. Dead or live fetuses were weighed, and live fetuses examined for external, visceral and skeletal defects.

  1. Charity Event Gives Department Employees an Excuse to Play with Their Food

    Broader source: Energy.gov [DOE]

    At the Energy Department Feeds Families Sculpture Contest, employees from across the organization made sculptures out of packaged food and household products to support the larger federal effort to help feed needy families in D.C. and beyond. In the end, participants donated 2,160 pounds of food at the event and pledged 130 pounds more.

  2. Foam vessel for cryogenic fluid storage

    DOE Patents [OSTI]

    Spear, Jonathan D

    2011-07-05

    Cryogenic storage and separator vessels made of polyolefin foams are disclosed, as are methods of storing and separating cryogenic fluids and fluid mixtures using these vessels. In one embodiment, the polyolefin foams may be cross-linked, closed-cell polyethylene foams with a density of from about 2 pounds per cubic foot to a density of about 4 pounds per cubic foot.

  3. EM Rockets Past Target for Donations to Stock Food Banks

    Broader source: Energy.gov [DOE]

    WASHINGTON, D.C. – EM donated close to 50,000 pounds of non-perishable items to the Fourth Annual Feds Feed Families Campaign, easily surpassing its target of 19,120 pounds. All donations were delivered directly to food banks to provide goods to the needy.

  4. An MHD heat source based on intermetallic reactions

    SciTech Connect (OSTI)

    Sadjian, H.; Zavitsanos, P. ); Marston, C.H. )

    1991-05-06

    The main objective of this program was the development of an MHD heat source of potential use in Space - Based Multi Megawatt, MHD Power Systems. The approach is based on extension of high temperature chemical/ion release technology developed by the General Sciences, Incorporated (GSI) team and successfully applied in other Space Applications. Solid state reactions have been identified which can deliver energy densities and electrons in excess of those from high energy explosives as well as other conventional fuels. The use of intermetallic reactions can be used to generate hot hydrogen plasma from the reaction, to create a high level of seedant ionization, can be packaged as a cartridge type fuels for discrete pulses. The estimated weight for energizing a (100 MW - 1000 sec) Pulsed MHD Power System can range from 12 to 25 {times} 10{sup 3} kg depending on reaction system and strength of the magnetic field. The program consisted of two major tasks with eight subtasks designed to systematically evaluate these concepts in order to reduce fuel weight requirements. Laboratory measurements on energy release, reaction product identification and levels of ionization were conducted in the first task to screen candidate fuels. The second task addressed the development of a reaction chamber in which conductivity, temperature and pressure were measured. Instrumentation was developed to measure these parameters under high temperature pulsed conditions in addition to computer programs to reduce the raw data. Measurements were conducted at GSI laboratories for fuel weights of up to 120 grams and at the Franklin Research Center* for fuel weights up to 1 kilogram. The results indicate that fuel weight can be scaled using modular packaging. Estimates are presented for fuel weight requirements. 15 refs.

  5. Do yield and quality of big bluestem and switchgrass feedstock decline over winter?

    SciTech Connect (OSTI)

    Jane M.F. Johnson; Garold L. Gresham

    2014-03-01

    Switchgrass (Panicum virgatum L.) and big bluestem (Andropogon gerdardii Vitman) are potential perennial bioenergy feedstocks. Feedstock storage limitations, labor constraints for harvest, and environmental benefits provided by perennials are rationales for developing localized perennial feedstock as an alternative or in conjunction with annual feedstocks (i.e., crop residues). Little information is available on yield, mineral, and thermochemical properties of native species as related to harvest time. The studys objectives were to compare the feedstock quantity and quality between grasses harvested in the fall or the following spring. It was hypothesized that biomass yield may decline, but translocation and/or leaching of minerals from the feedstock would improve feedstock quality. Feedstock yield did not differ by crop, harvest time, or their interactions. Both grasses averaged 6.0 Mg ha-1 (fall) and 5.4 Mg ha-1 (spring) with similar high heating value (17.7 MJ kg-1). The K/(Ca + Mg) ratio, used as a quality indicator declined to below a 0.5 threshold, but energy yield (Megajoule per kilogram) decreased 13% by delaying harvest until spring. Only once during the four study-years were conditions ideal for early spring harvest, in contrast during another spring, very muddy conditions resulted in excessive soil contamination. Early spring harvest may be hampered by late snow, lodging, and muddy conditions that may delay or prevent harvest, and result in soil contamination of the feedstock. However, reducing slagging/fouling potential and the mass of mineral nutrients removed from the field without a dramatic loss in biomass or caloric content are reasons to delay harvest until spring.

  6. H. R. 4177: A Bill to amend the Internal Revenue Code of 1986 to impose an excise tax on sulfur dioxide and nitrogen oxide emissions from utility plants. Introduced in the House of Representatives, One Hundredth First Congress, Second Session, March 5, 1990

    SciTech Connect (OSTI)

    Not Available

    1990-01-01

    The tax imposed would begin in 1991 in the amount of 15 cents per pound of sulfur dioxide released and 10 cents per pound nitrogen oxide, and would increase so that the tax in 1997 and thereafter would be 45 cents per pound of sulfur dioxide and 30 cents per pound of nitrogen oxide released. An inflation adjustment is provided for years after 1997. The tax is imposed on emissions which exceed the exemption level for each pollutant, and these levels are specified herein as pounds exempted per million Btu's of fuel burned. No tax is imposed on units less than 75 megawatts, or units providing less than one-third of the electricity produced to a utility power distribution system for sale.

  7. 2015 Domestic Uranium Production Report

    U.S. Energy Information Administration (EIA) Indexed Site

    5 2015 Domestic Uranium Production Report Release Date: May 5, 2016 Next Release Date: May 2017 Production / Mining Method 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 (estimated contained thousand pounds U 3 O 8 ) W W W W W W W W W W W W W (estimated contained thousand pounds U 3 O 8 ) 0 0 0 0 0 0 0 0 0 0 0 0 0 (thousand pounds U 3 O 8 ) W W 2,681 4,259 W W W W W W W W W (thousand pounds U 3 O 8 ) W W W W W W W W W W W W W (thousand pounds U 3 O 8 ) E2,200 2,452 3,045 4,692

  8. livermore | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    livermore NNSA Livermore Field Office donates over 4,000 pounds of food to food banks The NNSA Livermore Field Office in California donated over 4,000 pounds of food to local food banks, food pantries and other local groups in support of the 2015 Feds Feed Families campaign. As part of the campaign LFO staff, family and friends worked with The Urban Farmers to pick 600 pounds of... Catch up on the latest Sandia California news Each summer, Sandia National Laboratories focuses on news and events

  9. Immobilization of Rocky Flats Graphite Fines Residues

    SciTech Connect (OSTI)

    Rudisill, T. S.

    1998-11-06

    The Savannah River Technology Center (SRTC) is developing an immobilization process for graphite fines residues generated during nuclear materials production activities at the Rocky Flats Environmental Technology Site (Rocky Flats). The continued storage of this material has been identified as an item of concern. The residue was generated during the cleaning of graphite casting molds and potentially contains reactive plutonium metal. The average residue composition is 73 wt percent graphite, 15 wt percent calcium fluoride (CaF2), and 12 wt percent plutonium oxide (PuO2). Approximately 950 kilograms of this material are currently stored at Rocky Flats. The strategy of the immobilization process is to microencapsulate the residue by mixing with a sodium borosilicate (NBS) glass frit and heating at nominally 700 degrees C. The resulting waste form would be sent to the Waste Isolation Pilot Plant (WIPP) for disposal. Since the PuO2 concentration in the residue averages 12 wt percent, the immobilization process was required to meet the intent of safeguards termination criteria by limiting plutonium recoverability based on a test developed by Rocky Flats. The test required a plutonium recovery of less than 4 g/kg of waste form when a sample was leached using a nitric acid/CaF2 dissolution flowsheet. Immobilization experiments were performed using simulated graphite fines with cerium oxide (CeO2) as a surrogate for PuO2 and with actual graphite fines residues. Small-scale surrogate experiments demonstrated that a 4:1 frit to residue ratio was adequate to prevent recovery of greater than 4 g/kg of cerium from simulated waste forms. Additional experiments investigated the impact of varying concentrations of CaF2 and the temperature/heating time cycle on the cerium recovery. Optimal processing conditions developed during these experiments were subsequently demonstrated at full-scale with surrogate materials and on a smaller scale using actual graphite fines.In general, the recovery of cerium from the full-scale waste forms was higher than for smaller scale experiments. The presence of CaF2 also caused a dramatic increase in cerium recovery not seen in the small-scale experiments. However, the results from experiments with actual graphite fines were encouraging. A 4:1 frit to residue ratio, a temperature of 700 degrees C, and a 2 hr heating time produced waste forms with plutonium recoveries of 4 plus/minus 1 g/kg. With an increase in the frit to residue ratio, waste forms fabricated at this scale should meet the Rocky Flats product specification. The scale-up of the waste form fabrication process to nominally 3 kg is expected to require a 5:1 to 6:1 frit to residue ratio and maintaining the waste form centerline temperature at 700 degrees C for 2 hr.

  10. Packaging, Transportation and Recycling of NPP Condenser Modules - 12262

    SciTech Connect (OSTI)

    Polley, G.M. [Perma-Fix Environmental Services, 575 Oak Ridge Turnpike, Oak Ridge, TN 37830 (United States)

    2012-07-01

    Perma-Fix was awarded contract from Energy Northwest for the packaging, transportation and disposition of the condenser modules, water boxes and miscellaneous metal, combustibles and water generated during the 2011 condenser replacement outage at the Columbia Generating Station. The work scope was to package the water boxes and condenser modules as they were removed from the facility and transfer them to the Perma-Fix Northwest facility for processing, recycle of metals and disposition. The condenser components were oversized and overweight (the condenser modules weighed ?102,058 kg [225,000 lb]) which required special equipment for loading and transport. Additional debris waste was packaged in inter-modals and IP-1 boxes for transport. A waste management plan was developed to minimize the generation of virtually any waste requiring landfill disposal. The Perma-Fix Northwest facility was modified to accommodate the ?15 m [50-ft] long condenser modules and equipment was designed and manufactured to complete the disassembly, decontamination and release survey. The condenser modules are currently undergoing processing for free release to a local metal recycler. Over three millions pounds of metal will be recycled and over 95% of the waste generated during this outage will not require land disposal. There were several elements of this project that needed to be addressed during the preparation for this outage and the subsequent packaging, transportation and processing. - Staffing the project to support 24/7 generation of large components and other wastes. - The design and manufacture of the soft-sided shipping containers for the condenser modules that measured ?15 m X 4 m X 3 m [50 ft X 13 ft X 10 ft] and weighed ?102,058 kg [225,000 lbs] - Developing a methodology for loading the modules into the shipping containers. - Obtaining a transport vehicle for the modules. - Designing and modifying the processing facility. - Movement of the modules at the processing facility. If any of these issues were not adequately resolved prior to the start of the outage, costly delays would result and the re-start of the power plant could be impacted. The main focus of this project was to find successful methods for keeping this material out of the landfills and preserving the natural resources. In addition, this operation provided a significant cost savings to the public utility by minimizing landfill disposal. The onsite portion of the project has been completed without impact to the overall outage schedule. By the date of presentation, the majority of the waste from the condenser replacement project will have been processed and recycled. The goals for this project included helping Energy Northwest maintain the outage schedule, package and characterize waste compliantly, perform transportation activities in compliance with 49CFR (Ref-1), and minimize the waste disposal volume. During this condenser replacement project, over three millions pounds of waste was generated, packaged, characterized and transported without injury or incident. It is anticipated that 95% of the waste generated during this project will not require landfill disposal. All of the waste is scheduled to be processed, decontaminated and recycled by June of 2012. (authors)

  11. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Experimental Vehicle Definition and Requirements A vehicle weighing 6,000 pounds or less that is primarily powered by a source other than a combustion engine may be considered an...

  12. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    has a maximum speed greater than 20 miles per hour (mph) but not more than 25 mph and has a gross vehicle weight rating less than 3,000 pounds. (Reference Arkansas Code 23-112-103...

  13. Heart

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Heart of the upgrade: The NSTX-U center stack consists of 36 22-foot- long, 350-pound copper conductors. Time flies: Technicians spent more than 360,000 worker hours building the...

  14. NNSA Supports NASA MARS Scientific Laboratory Launch | National...

    National Nuclear Security Administration (NNSA)

    made up of just more than 10 pounds of plutionium-238, and NNSA personnel were there in the unlikely event of an accident involving the Atlas V Rocket carrying the Curiosity rover. ...

  15. A I K E N

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and sizes. The 250-pound feldspar crystal can be touched, stroked, and hugged, so children can run their hands along the crystal faces and consider how neat it is that it...

  16. Ames Lab at a Glance | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The Ames Project produced more than 2,000,000 pounds of pure uranium for the Manhattan Project. In 1947, the Atomic Energy Commission formally established the Ames Laboratory. At ...

  17. 2015 Uranium Marketing Annual Report

    U.S. Energy Information Administration (EIA) Indexed Site

    2015 Uranium Marketing Annual Report 2015 Uranium Marketing Annual Report Release Date: May 24, 2016 Next Release Date: May 2017 thousand pounds U 3 O 8 equivalent Year Maximum ...

  18. 2015 Uranium Marketing Annual Report

    U.S. Energy Information Administration (EIA) Indexed Site

    2015 Uranium Marketing Annual Report Release Date: May 24, 2016 Next Release Date: May ... and 16. 2003-15-Form EIA-858, "Uranium Marketing Annual Survey". million pounds U 3 O 8 ...

  19. LANL Conducts Watusi Experiment | National Nuclear Security Administra...

    National Nuclear Security Administration (NNSA)

    Test Site, NV The Los Alamos National Laboratory conducts Watusi, a spectacular high-explosives experiment with a yield equivalent to about 37,000 pounds of TNT, at the Nevada Test ...

  20. Monthly Biodiesel Production Report

    U.S. Energy Information Administration (EIA) Indexed Site

    U.S. Inputs to biodiesel production million pounds Period Canola oil Corn oil Cottonseed ... Source: U.S. Energy Information Administration, Form EIA-22M "Monthly Biodiesel Production ...

  1. Parkersburg, West Virginia, Disposal Site Fact Sheet

    Office of Legacy Management (LM)

    During its years of operation, the mill processed an estimated 2 million pounds of ... The two DOE wells are currently sampled every 5 years as a best management practice. To ...

  2. Domestic Uranium Production Report - Quarterly

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    1. Total production of uranium concentrate in the United States, 1996 - 3rd quarter 2015 pounds U3O8 Calendar-year quarter 1st quarter 2nd quarter 3rd quarter 4th quarter...

  3. Electrohydraulic Forming of Near Net Shape Automotive Panels

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    million vehicles annually that each contain 900 pounds of stamped steel sheet metal parts. ... to limit their capabilities to a single family of materials, such as steel or aluminum. ...

  4. Fact #786: July 1, 2013 Use of Lightweight Materials is on the...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and in many cases, aluminum wheels have replaced heavier steel wheels as standard equipment. Use of regular steel has declined by an average of 172 pounds per vehicle from 1995 ...

  5. Uranium Marketing Annual Report

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    nuclear power reactors, 1994-2014 million pounds U3O8 equivalent million separative work units (SWU) Year Feed deliveries by owners and operators of U.S. civilian nuclear ...

  6. EDS V25 containment vessel explosive qualification test report.

    SciTech Connect (OSTI)

    Rudolphi, John Joseph

    2012-04-01

    The V25 containment vessel was procured by the Project Manager, Non-Stockpile Chemical Materiel (PMNSCM) as a replacement vessel for use on the P2 Explosive Destruction Systems. It is the first EDS vessel to be fabricated under Code Case 2564 of the ASME Boiler and Pressure Vessel Code, which provides rules for the design of impulsively loaded vessels. The explosive rating for the vessel based on the Code Case is nine (9) pounds TNT-equivalent for up to 637 detonations. This limit is an increase from the 4.8 pounds TNT-equivalency rating for previous vessels. This report describes the explosive qualification tests that were performed in the vessel as part of the process for qualifying the vessel for explosive use. The tests consisted of a 11.25 pound TNT equivalent bare charge detonation followed by a 9 pound TNT equivalent detonation.

  7. Incinerator Completes Mission in Oak Ridge

    Broader source: Energy.gov [DOE]

    After more than 18 years of operation and more than 35 million pounds of waste safely incinerated, the Toxic Substances Control Act (TSCA) Incinerator will shut down operations on December 2.

  8. Under Secretary Klotz packs last crate at Kansas City Plant ...

    National Nuclear Security Administration (NNSA)

    thousands of pieces of equipment, some weighing as little as six ounces to a milling machine weighing 87,000 pounds. Later in the day, General Klotz thanked everyone who was...

  9. Coca-Cola Refreshments Class 8 Diesel Electric Hybrid Tractor...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... GPS global positioning system HEV hybrid electric vehicle HHDDT Heavy Heavy-Duty Diesel Truck KI kinetic intensity lbs pounds mi miles mph miles per hour NO x nitrogen ...

  10. Fact #627: June 14, 2010 Idle Reduction for Heavy Trucks

    Broader source: Energy.gov [DOE]

    In order to encourage the use of idling reduction devices in large trucks, the Energy Policy Act of 2005 allowed for a 400-pound weight exemption for the additional weight of idling reduction...

  11. Demolitions Produce Recyclable Materials for Organization Promoting Economic Activity

    Broader source: Energy.gov [DOE]

    Demolitions have helped generate more than 8 million pounds of metal at the Piketon site for recycling, further promoting economic activity in the region thanks to the American Recovery and...

  12. August 2013 | National Nuclear Security Administration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    with four showering units, water supply, self-contained waste handling, two 80-pound propane tanks and its own generator. It is intended for use in decontaminating victims in...

  13. Iowa Powder Atomization Technologies, Inc. | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    as aerospace components. Dr. Randall German reported in 2009 that saving 2.2 pounds of weight on an aircraft is ... resistance. Learn More SH Coatings LP Oak Ridge National ...

  14. Employees give to local food bank

    Broader source: Energy.gov [DOE]

    Employees in DOE's Oak Ridge Office of EM donated 3,209 pounds of food to the Second Harvest Food Bank of East Tennessee. The donation was part of the national Feds Feed Families campaign.

  15. C:\\ANNUAL\\Vol2chps.v8\\ANNUAL2.VP

    Gasoline and Diesel Fuel Update (EIA)

    Aquifer Field: A sub-surface facility for storing natural gas consisting of water-bearing ... temperature of 1 pound of water by 1 degree Fahrenheit at or near 39.2 degrees Fahrenheit. ...

  16. WSRC-MS-99-00210

    Office of Scientific and Technical Information (OSTI)

    included standard machining, gas-tungsten arc (GTA) welding, pinch welding, and casting. Each assembly is small enough to hold in two hands and weighs 44 pounds or less....

  17. Photo Gallery: Argonne OutLoud: "Invisible Influence: A Bacterial...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    In fact, we have approximately 2-3 pounds of bacteria living on and in our bodies - the same weight as the human brain. Like the brain and other valuable organs, this microbial ...

  18. Appendix J - GPRA06 vehicle technologies program

    SciTech Connect (OSTI)

    None, None

    2009-01-18

    The target market for the Office of FreedomCAR and Vehicle Technologies (FCVT) program include light vehicles (cars and light trucks) and heavy vehicles (trucks more than 10,000 pounds Gross Vehicle Weight).

  19. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    thermal units and a GGE of liquefied natural gas (LNG) must be at least 6.06 pounds. ... LNG is defined as methane or natural gas in the form of a cryogenic or refrigerated liquid ...

  20. This Week In Petroleum Summary Printer-Friendly Version

    Gasoline and Diesel Fuel Update (EIA)

    California pipelines require the RVP of gasoline shipped on their systems to transition from the December-January specification of 15 pounds per square inch (psi) to 13.5...

  1. 2005 Residential Energy Consumption Survey

    U.S. Energy Information Administration (EIA) Indexed Site

    ... foot at a pressure base of 14.73 pounds standard per square inch absolute and a temperature base of 60 degrees Fahrenheit; Cubic meter is a unit of measure which equals 35.314 ...

  2. NNSA Production Office tops Feds Feed Families campaign goal...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    - 9:45am Oak Ridge, Tenn. - Employees of the National Nuclear Security Administration Production Office have donated 17,348 pounds of food as part of the annual U.S. Department...

  3. RAPID/Roadmap/6-ID-a | Open Energy Information

    Open Energy Info (EERE)

    load A load is overlegal if the load is: width over 8'6"; Over 14' tall; Truck and trailer combined are over 75' long; or The load weighs over 80,000 pounds. 6-ID-a.2 - Meet...

  4. CX-005320: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    700/100 Pounds Per Square Inch Compressor Additional Filtration ProjectCX(s) Applied: B2.5Date: 02/24/2011Location(s): Morgantown, West VirginiaOffice(s): Fossil Energy, National Energy Technology Laboratory

  5. U

    Gasoline and Diesel Fuel Update (EIA)

    ... Glycerol Production b. Other Co-Product Production c. Was Glycerol Purity Verified By Laboratory Test? (Yes or No) C. Inputs to Production Pounds a. Feedstocks used in B100 ...

  6. Implementing a Corporate Energy Management System

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Our progress toward sustainability 3M 2010. All Rights ... Corporate Energy Policy Applies To: This policy applies to ... Energy Trend BtuPound of Product 23,843 18,761 17,845 ...

  7. Fuel Mix and Emissions Disclosure | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Customer Choice and Electric Reliability Act of 2000 (P.A. 141) requires electric suppliers to disclose to customers details related to the fuel mix and emissions, in pounds...

  8. Risk Removal | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    EM has separated Oak Ridge's risk into three major categories: Environmental Risk - During the Manhattan Project and Cold War, Y-12's operations lost as much as 700,000 pounds of ...

  9. Overview of VTO Material Technologies

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Acceptable Cost Per Pound of Weight Saved EIA Projected Gas Price (High Case) 3.50 per ... Magnesium Alloys Aluminum Alloys China, 80% U.S., 7% Russia, 4% Others , 9% When it ...

  10. DOE - Office of Legacy Management -- University of California...

    Office of Legacy Management (LM)

    Subject: List of California Sites; May 17, 1989 CA.05-3 - AEC Memorandum; Ball to Smith; Subject: 500 Pounds UO3 - SR-1952; July 10, 1951 CA.05-4 - AEC Memorandum; Blatzs to ...

  11. DOE-HDBK-1169-2003; DOE Handbook Nuclear Air Cleaning Handbook

    Office of Environmental Management (EM)

    TECHNICAL STANDARDS NOVEMBER 2003 TS INCH-POUND DOE-HDBK-1169-2003 DOE HANDBOOK NUCLEAR AIR CLEANING HANDBOOK U.S. Department of Energy Washington, DC 20585 DISTRIBUTION STATEMENT ...

  12. Simulations aimed at safer transport of explosives | Argonne...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    click to view larger. Simulations aimed at safer transport of explosives By Jim Collins * January 7, 2015 Tweet EmailPrint In 2005, a semi truck hauling 35,000 pounds of...

  13. Slide 1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    December 2010 - Mtg was held wU.S. Fish and Wildlife Service (FWS) and MO Dept of ... however, an estimated 2,000 pounds of fish were killed. Mortalities caused by ...

  14. removal

    National Nuclear Security Administration (NNSA)

    80 pounds) of highly enriched uranium (HEU) spent fuel from the Institute of Nuclear Physics (INP) in Almaty, Kazakhstan. The HEU was transported via two air shipments to a...

  15. I HEAVY MINERALS CO. 836 South Michigan Avenue Chic&o-5, Illinois

    Office of Legacy Management (LM)

    Chattanooga, Term. , of 4, 25 per pound of contained thorium oxide (ThOZ), both prices to be subject to a mutually agree- able escalation clause. Very truly yours, HEAVY MINERALS ...

  16. Microsoft Word - Cleaning_Up_the_Idaho_Site_3_.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    or radioactive targeted waste materials that have been packaged into more than 5,500 drums (1,144 cubic meters) and removing 223,000 pounds of hazardous vapors from the burial...

  17. Illinois: Ozinga Concrete Runs on Natural Gas and Opens Private Station

    Broader source: Energy.gov [DOE]

    The trucks are part of a much larger Recovery Act project, which is expected to reduce 3.1 million GGE/year and 8,429 pounds of carbon dioxide per year.

  18. Results from the Plug-and-Play Workshop

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... techniques could be a solution Structure * 5 kW system weigh 1200 pounds spread over the roof * Water penetration into the roof is a big concern when holes are drilled to install ...

  19. Energy Efficiency Report--Glossary

    Gasoline and Diesel Fuel Update (EIA)

    Thermal Unit (Btu): The quantity of heat needed to raise the temperature of 1 pound of water by 1 degree Fahrenheit at or near 39.2 degrees Fahrenheit. Census Region: A geographic...

  20. Microsoft Word - LL-ULS reclamation.doc

    Energy Savers [EERE]

    1,000 pounds per acre of Granular Humate is recommended for harsh sites. At one site, cattle were used to amend poor soils. After hand-broadcasting seed, cattle were brought onto...

  1. Jr., Process Development Branch Construction Division SUBJECT...

    Office of Legacy Management (LM)

    raffinate with an inlet air temperature of 920 - 99poF (equivalent to about 7 pounds per minute). The feed temperature ye about 1300F. The outlet air temperature wae 420 - ...

  2. 23 V.S.A. Section 1392 Gross Weight Limits on Highways | Open...

    Open Energy Info (EERE)

    Section 1392 Gross Weight Limits on HighwaysLegal Abstract Statute establishes the motor vehicle weight, load size, not to exceed 80,000 pounds without a permit. Published NA...

  3. Leak Detection/Fugitive Emissions Monitoring and Advanced Sensors, Controls, Models and Platforms Panel

    Energy Savers [EERE]

    and Methane Emissions Mitigation Workshop Leak Detection/Fugitive Emissions Monitoring and Advanced Sensors, Controls, Models and Platforms Panel November 12, 2014 POUND FOR POUND METHANE TRAPS 84X MORE HEAT OVER 20 YEARS CO2 CH4 Methane is Money $1,800,000,000 Current technologies - economic and effective * Economic cost benefit analysis * Industry input included * Main finding: Cut emissions 40% at $0.01/McF reduced * OGI provides reliable and proven means of detecting leaks * EPA White Paper

  4. OTS NOTF

    Office of Legacy Management (LM)

    NOTF DATE: December 18, 1990 TO: Alexander Williams, FROM:~ Dan Stou d- SUBJECT: Additional Considered Sites During historical searches I have identified several potential considered sites. .Two historical documents referencing three sites are attached and highlighted. The first attachment refers ,to'a four pound uranium rod shipped to the Catalytic Company (the Fernald construction contractor). It also notes that 100 pounds of uranium oxide was shipped to the,Milwaukee airport for Fred Stroke

  5. Uranium Marketing Annual Report -

    Gasoline and Diesel Fuel Update (EIA)

    b. Uranium purchased by owners and operators of U.S. civilian nuclear power reactors ranked by price and distributed by purchaser, 2012-14 deliveries thousand pounds U3O8 equivalent; dollars per pound U3O8 equivalent Deliveries in 2012 Deliveries in 2013 Deliveries in 2014 Distribution of purchasers Number of purchasers Quantity with reported price Weighted-average price Number of purchasers Quantity with reported price Weighted-average price Number of purchasers Quantity with reported price

  6. Review of the NURE Assessment of the U.S. Gulf Coast Uranium Province

    SciTech Connect (OSTI)

    Hall, Susan M.

    2013-09-15

    Historic exploration and development were used to evaluate the reliability of domestic uranium reserves and potential resources estimated by the U.S. Department of Energy national uranium resource evaluation (NURE) program in the U.S. Gulf Coast Uranium Province. NURE estimated 87 million pounds of reserves in the $30/lb U{sub 3}O{sub 8} cost category in the Coast Plain uranium resource region, most in the Gulf Coast Uranium Province. Since NURE, 40 million pounds of reserves have been mined, and 38 million pounds are estimated to remain in place as of 2012, accounting for all but 9 million pounds of U{sub 3}O{sub 8} in the reserve or production categories in the NURE estimate. Considering the complexities and uncertainties of the analysis, this study indicates that the NURE reserve estimates for the province were accurate. An unconditional potential resource of 1.4 billion pounds of U{sub 3}O{sub 8}, 600 million pounds of U{sub 3}O{sub 8} in the forward cost category of $30/lb U{sub 3}O{sub 8} (1980 prices), was estimated in 106 favorable areas by the NURE program in the province. Removing potential resources from the non-productive Houston embayment, and those reserves estimated below historic and current mining depths reduces the unconditional potential resource 33% to about 930 million pounds of U{sub 3}O{sub 8}, and that in the $30/lb cost category 34% to 399 million pounds of U{sub 3}O{sub 8}. Based on production records and reserve estimates tabulated for the region, most of the production since 1980 is likely from the reserves identified by NURE. The potential resource predicted by NURE has not been developed, likely due to a variety of factors related to the low uranium prices that have prevailed since 1980.

  7. 2015 Domestic Uranium Production Report

    U.S. Energy Information Administration (EIA) Indexed Site

    Domestic Uranium Production Report 2015 Domestic Uranium Production Report Release Date: May 5, 2016 Next Release Date: May 2017 Table 9. Summary production statistics of the U.S. uranium industry, 1993-2015 Exploration and Development Surface Exploration and Development Drilling Mine Production of Uranium Uranium Concentrate Production Uranium Concentrate Shipments Employment Year Drilling (million feet) Expenditures 1 (million dollars) (million pounds U 3 O 8 ) (million pounds U 3 O 8 )

  8. 2015 Domestic Uranium Production Report

    U.S. Energy Information Administration (EIA) Indexed Site

    9. Summary production statistics of the U.S. uranium industry, 1993-2015" ,"Exploration and Development Surface ","Exploration and Development Drilling","Mine Production of Uranium ","Uranium Concentrate Production ","Uranium Concentrate Shipments ","Employment " "Year","Drilling (million feet)"," Expenditures 1 (million dollars)","(million pounds U3O8)","(million pounds

  9. Feasibility Study of Hydrogen Production from Existing Nuclear Power Plants Using Alkaline Electrolysis

    SciTech Connect (OSTI)

    Dana R. Swalla

    2008-12-31

    The mid-range industrial market currently consumes 4.2 million metric tons of hydrogen per year and has an annual growth rate of 15% industries in this range require between 100 and 1000 kilograms of hydrogen per day and comprise a wide range of operations such as food hydrogenation, electronic chip fabrication, metals processing and nuclear reactor chemistry modulation.

  10. Energy Department Completes Salt Coolant Material Transfer to Czech Republic for Advanced Reactor Research

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy recently joined with the U.S. Embassy in Prague and the Czech Republic’s Ministry of Industry and Trade to complete the transfer of 75 kilograms of fluoride salt from the Department’s Oak Ridge National Laboratory to the Czech Nuclear Research Institute Řež.

  11. Magnesium oxide inserts for the LECO Carbon Analyzer

    SciTech Connect (OSTI)

    Bagaasen, L.M.; Jensen, C.M.

    1991-01-16

    LECO carbon analysis of plutonium metal and plutonium oxide at the Rocky Flats Plant generates several hundred kilograms of high silica residues each year. The plutonium in these residues is difficult and expensive to recover using production dissolution processes. A magnesium oxide (MgO) insert has been developed that significantly lowers the plutonium recovery costs without adversely affecting accuracy of the carbon analysis.

  12. LLNL Site plan for a MOX fuel lead assembly mission in support of surplus plutonium disposition

    SciTech Connect (OSTI)

    Bronson, M.C.

    1997-10-01

    The principal facilities that LLNL would use to support a MOX Fuel Lead Assembly Mission are Building 332 and Building 334. Both of these buildings are within the security boundary known as the LLNL Superblock. Building 332 is the LLNL Plutonium Facility. As an operational plutonium facility, it has all the infrastructure and support services required for plutonium operations. The LLNL Plutonium Facility routinely handles kilogram quantities of plutonium and uranium. Currently, the building is limited to a plutonium inventory of 700 kilograms and a uranium inventory of 300 kilograms. Process rooms (excluding the vaults) are limited to an inventory of 20 kilograms per room. Ongoing operations include: receiving SSTS, material receipt, storage, metal machining and casting, welding, metal-to-oxide conversion, purification, molten salt operations, chlorination, oxide calcination, cold pressing and sintering, vitrification, encapsulation, chemical analysis, metallography and microprobe analysis, waste material processing, material accountability measurements, packaging, and material shipping. Building 334 is the Hardened Engineering Test Building. This building supports environmental and radiation measurements on encapsulated plutonium and uranium components. Other existing facilities that would be used to support a MOX Fuel Lead Assembly Mission include Building 335 for hardware receiving and storage and TRU and LLW waste storage and shipping facilities, and Building 331 or Building 241 for storage of depleted uranium.

  13. Results of Characterization and Retrieval Testing on Tank 241-C-110 Heel Solids

    SciTech Connect (OSTI)

    Callaway, William S.

    2013-09-30

    Nine samples of heel solids from tank 241-C-110 were delivered to the 222-S Laboratory for characterization and dissolution testing. After being drained thoroughly, the sample solids were primarily white to light-brown with minor dark-colored inclusions. The maximum dimension of the majority of the solids was <2 mm; however, numerous pieces of aggregate, microcrystalline, and crystalline solids with maximum dimensions ranging from 5-70 mm were observed. In general, the larger pieces of aggregate solids were strongly cemented. Natrophosphate [Na{sub 7}F(PO{sub 4}){sub 2}�19H{sub 2}O] was the dominant solid phase identified in the heel solids. Results of chemical analyses suggested that 85-87 wt% of the heel solids were the fluoridephosphate double salt. The average bulk density measured for the heel solids was 1.689 g/mL; the reference density of natrophosphate is 1.71 g/mL. Dissolution tests on composite samples indicate that 94 to 97 wt% of the tank 241-C-110 heel solids can be retrieved by dissolution in water. Dissolution and recovery of the soluble components in 1 kg (0.59 L) of the heel solids required the addition of ≈9.5 kg (9.5 L) of water at 15 �C and ≈4.4 kg (4.45 L) of water at 45 �C. Calculations performed using the Environmental Simulation Program indicate that dissolution of the ≈0.86 kg of natrophosphate in each kilogram of the tank 241-C-110 heel solids would require ≈9.45 kg of water at 15 �C and ≈4.25 kg of water at 45 �C. The slightly larger quantities of water determined to be required to retrieve the soluble components in 1 kg of the heel solids are consistent with that required for the dissolution of solids composed mainly of natrophosphate with a major portion of the balance consisting of highly soluble sodium salts. At least 98% of the structural water, soluble phosphate, sodium, fluoride, nitrate, carbonate, nitrite, sulfate, oxalate, and chloride in the test composites was dissolved and recovered in the dissolution tests. Most of the {sup 99}Tc and {sup 137}Cs present in the initial heel solids composites was removed in the water dissolution tests. The estimated activities/weights of {sup 129}I, {sup 234}U, {sup 235}U, {sup 236}U, and {sup 238}U in the dry residual solids were <25% of the weights/activities in the initial composite solids. Gibbsite and nordstrandite [both Al(OH){sub 3}] were the major solid phases identified in the solids remaining after completion of the dissolution tests. Chemical analysis indicated that the residual solids may have contained up to 62 wt% Al(OH){sub 3}. Significant quantities of unidentified phosphate-, iron-, bismuth-, silicon-, and strontium- bearing species were also present in the residual solids. The reference density of gibbsite (and nordstrandite) is 2.42 g/mL. The measured density of the residual solids, 2.65 g/mL, would be a reasonable value for solids containing gibbsite as the major component with minor quantities of other, higher density solids. Sieve analysis indicated that 22.2 wt% of the residual solids were discrete particles >710 μm in size, and 77.8 wt% were particulates <710 μm in size. Light-scattering measurements suggested that nearly all of the <710-μm particulates with diameters >12 μm were weakly bound aggregates of particles with diameters <2 μm. The <710-μm residual solids settled very slowly when dispersed in reagent water. The physical appearance of a suspension containing ≈0.4 vol% of the solids in pure water changed very little over a period of 46.5 hours. It should be noted that the distribution of particle sizes in the residual solids and the observed settling behavior were both strongly influenced by the procedures followed in the dissolution tests.

  14. Corrective Action Decision Document/Closure Report for Corrective Action Unit 561: Waste Disposal Areas, Nevada National Security Site, Nevada, Revision 0

    SciTech Connect (OSTI)

    Mark Krauss

    2011-08-01

    CAU 561 comprises 10 CASs: (1) 01-19-01, Waste Dump; (2) 02-08-02, Waste Dump and Burn Area; (3) 03-19-02, Debris Pile; (4) 05-62-01, Radioactive Gravel Pile; (5) 12-23-09, Radioactive Waste Dump; (6) 22-19-06, Buried Waste Disposal Site; (7) 23-21-04, Waste Disposal Trenches ; (8) 25-08-02, Waste Dump; (9) 25-23-21, Radioactive Waste Dump; and (10) 25-25-19, Hydrocarbon Stains and Trench. The purpose of this CADD/CR is to provide justification and documentation supporting the recommendation for closure of CAU 561 with no further corrective action. The purpose of the CAI was to fulfill the following data needs as defined during the DQO process: (1) Determine whether COCs are present; (2) If COCs are present, determine their nature and extent; and (3) Provide sufficient information and data to complete appropriate corrective actions. The following contaminants were determined to be present at concentrations exceeding their corresponding FALs: (1) No contamination exceeding FALs was identified at CASs 01-19-01, 03-19-02, 05-62-01, 12-23-09, and 22-19-06. (2) The surface and subsurface soil within the burn area at CAS 02-08-02 contains arsenic and lead above the FALs of 23 milligrams per kilogram (mg/kg) and 800 mg/kg, respectively. The surface and subsurface soil within the burn area also contains melted lead slag (potential source material [PSM]). The soil within the waste piles contains polyaromatic hydrocarbons (PAHs) above the FALs. The contamination within the burn area is spread throughout the area, as it was not feasible to remove all the PSM (melted lead), while at the waste piles, the contamination is confined to the piles. (3) The surface and subsurface soils within Trenches 3 and 5 at CAS 23-21-04 contain arsenic and polychlorinated biphenyls (PCBs) above the FALs of 23 mg/kg and 0.74 mg/kg, respectively. The soil was removed from both trenches, and the soil that remains at this CAS does not contain contamination exceeding the FALs. Lead bricks and counterweights were also removed, and the soil below these items does not contain contamination that exceeds the FAL for lead. (4) The concrete-like material at CAS 25-08-02 contains arsenic above the FAL of 23 mg/kg. This concrete-like material was removed, and the soil that remains at this CAS does not contain contamination exceeding the FALs. Lead-acid batteries were also removed, and the soil below the batteries does not contain contamination that exceeds the FAL for lead. (5) The surface soils within the main waste dump at the posted southern radioactive material area (RMA) at CAS 25-23-21 contain cesium (Cs)-137 and PCBs above the FALs of 72.9 picocuries per gram (pCi/g) and 0.74 mg/kg, respectively. The soil was removed from the RMA, and the soil that remains at this CAS does not contain contamination exceeding the FALs. (6) The surface and subsurface soils at CAS 25-25-19 do not contain contamination exceeding the FALs. In addition, lead bricks were removed, and the soil below these items does not contain contamination that exceeds the FAL for lead. The following best management practices were implemented: (1) Housekeeping debris at CASs 02-08-02, 23-21-04, 25-08-02, 25-23-21, and 25-25-19 was removed and disposed of; (2) The open trenches at CAS 23-21-04 were backfilled; (3) The waste piles at CAS 25-08-02 were removed and the area leveled to ground surface; and (4) The remaining waste piles at the main waste dump at CAS 25-23-21 were leveled to ground surface. Therefore, NNSA/NSO provides the following recommendations: (1) No further action for CASs 01-19-01, 03-19-02, 05-62-01, 12-23-09, and 22-19-06; (2) Closure in place with an FFACO use restriction (UR) at CAS 02-08-02 for the remaining PAH-, arsenic-, and lead-contaminated soil, and the melted lead PSM. The UR form and map have been filed in the NNSA/NSO Facility Information Management System, the FFACO database, and the NNSA/NSO CAU/CAS files; (3) No further corrective action at CAS 23-21-04, as the lead bricks and counterweights (PSM) have been removed, and the COCs of arsenic and PCBs in soil have been removed; (4) No further corrective action at CAS 25-08-02, as the COC of arsenic in soil has been removed, and the lead-acid batteries have been removed; (5) No further corrective action at CAS 25-23-21, as the COCs of Cs-137 and PCBs in soil have been removed, and the cast-iron pipes have been removed and disposed of; (6) No further corrective action at CAS 25-25-19, as the lead bricks (PSM) been removed; (7) A Notice of Completion to the NNSA/NSO is requested from the Nevada Division of Environmental Protection for closure of CAU 561; and (8) Corrective Action Unit 561 should be moved from Appendix III to Appendix IV of the FFACO.

  15. Buildings Energy Data Book: 1.4 Environmental Data

    Buildings Energy Data Book [EERE]

    2 Characteristics of U.S. Construction Waste - Two to seven tons of waste (a rough average of 4 pounds of waste per square foot) are generated during the construction of a new single-family detached house. - 15 to 70 pounds of hazardous waste are generated during the construction of a detached, single-family house. Hazardous wastes include paint, caulk, roofing cement, aerosols, solvents, adhesives, oils, and greases. - Each year, U.S. builders produce between 30 and 35 million tons of

  16. NNSA Production Office tops Feds Feed Families campaign goal | Y-12

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    National Security Complex tops ... NNSA Production Office tops Feds Feed Families campaign goal Posted: September 16, 2013 - 9:45am Oak Ridge, Tenn. - Employees of the National Nuclear Security Administration Production Office have donated 17,348 pounds of food as part of the annual U.S. Department of Energy's "Feds Feed Families" campaign. The campaign, which ended on September 6, surpassed the goal of 17,000 pounds. "I am extremely proud and moved by the generosity of NPO

  17. US ITER | Media Corner

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    US ITER ships 30,000 pounds of magnet system hardware to Europe US ITER ships 30,000 pounds of magnet system hardware to Europe An 800-meter length of sample toroidal field conductor is en route to La Spezia, Italy -Lynne Degitz Published June 9, 2014 The 800-meter sample toroidal field conductor was transferred to a container ship at the port of Charleston, S.C., on May 28, 2014 for its voyage to La Spezia, Italy. The 800-meter sample toroidal field conductor was transferred to a container ship

  18. Table 9.3 Uranium Overview, 1949-2011

    U.S. Energy Information Administration (EIA) Indexed Site

    3 Uranium Overview, 1949-2011 Year Domestic Concentrate Production 1 Purchased Imports 2 Export 2 Sales Electric Plant Purchases From Domestic Suppliers Loaded Into U.S. Nuclear Reactors 3 Inventories Average Price Domestic Suppliers Electric Plants Total Purchased Imports Domestic Purchases Million Pounds Uranium Oxide Dollars 4 per Pound Uranium Oxide 1949 0.36 4.3 0.0 NA NA NA NA NA NA NA 1950 .92 5.5 .0 NA NA NA NA NA NA NA 1951 1.54 6.1 .0 NA NA NA NA NA NA NA 1952 1.74 5.7 .0 NA NA NA NA

  19. Word Pro - S4.lwp

    U.S. Energy Information Administration (EIA) Indexed Site

    0 Uranium Reserves, 2008 By State Total Reserves 106 U.S. Energy Information Administration / Annual Energy Review 2011 1 See "Nominal Dollars" in Glossary. 2 Alaska, California, Idaho, Montana, Nebraska, Nevada, North Dakota, Oregon, South Dakota, Virginia, and Washington. Notes: * See "Uranium Oxide" in Glossary. * Data are at end of year. Source: Table 4.10. Forward-Cost Category (dollars¹ per pound) 539 1,227 $50 or Less $100 or Less 0 500 1,000 1,500 Million Pounds

  20. The greening of Y-12 | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The greening of Y-12 The greening of Y-12 Posted: September 9, 2013 - 2:48pm With more than 1,230 pollution prevention initiatives reducing some 2.07 billion pounds of waste since 1993, Y-12 sustainability programs yielded $70.7 million in cost efficiencies to the Y-12 Complex, and consequently, to taxpayers. Here are a few other Y-12 green facts: In FY 2012, Y-12 recycled more than 3 million pounds of materials off-site including routine paper, cardboard, wooden pallets, scrap metal, lamps,

  1. PPPL earns top EPA award | Princeton Plasma Physics Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PPPL earns top EPA award By Jeanne Jackson DeVoe March 14, 2013 Tweet Widget Google Plus One Share on Facebook The demolition and sale of the C-Site motor generators yielded over 4 million pounds of metal. The recycling of the metal was a big factor in PPPL winning the 2012 EPA WasteWise Program's Federal Partner of the Year. (Photo by Elle Starkman, PPPL Office of Communications ) The demolition and sale of the C-Site motor generators yielded over 4 million pounds of metal. The recycling of the

  2. PPPL earns top EPA award | Princeton Plasma Physics Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PPPL earns top EPA award By Jeanne Jackson DeVoe March 14, 2013 Tweet Widget Google Plus One Share on Facebook The demolition and sale of the C-Site motor generators yielded over 4 million pounds of metal. The recycling of the metal was a big factor in PPPL winning the 2012 EPA WasteWise Program's Federal Partner of the Year. (Photo by Elle Starkman/PPPL Office of Communications) The demolition and sale of the C-Site motor generators yielded over 4 million pounds of metal. The recycling of the

  3. Method of regulating the amount of underfire air for combustion of wood fuels in spreader-stroke boilers

    DOE Patents [OSTI]

    Tuttle, Kenneth L.

    1980-01-01

    A method of metering underfire air for increasing efficiency and reducing particulate emissions from wood-fire, spreader-stoker boilers is disclosed. A portion of the combustion air, approximately one pound of air per pound of wood, is fed through the grate into the fuel bed, while the remainder of the combustion air is distributed above the fuel in the furnace, and the fuel bed is maintained at a depth sufficient to consume all oxygen admitted under fire and to insure a continuous layer of fresh fuel thereover to entrap charred particles inside the fuel bed.

  4. N.J. DEP recognizes PPPL as state's top environmental steward | Princeton

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Plasma Physics Lab N.J. DEP recognizes PPPL as state's top environmental steward By Jeanne Jackson DeVoe May 21, 2013 Tweet Widget Google Plus One Share on Facebook Adam Cohen, center, PPPL's Deputy Director for Operations, and other PPPL employees clean up the grounds to celebrate Earth Week last month. Some 32 volunteers collected 350 pounds of trash and 35 pounds of leaves for composting. PPPL's composting and recycling efforts resulted in a 40 percent reduction in the amount of trash

  5. N.J. DEP recognizes PPPL as state's top environmental steward | Princeton

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Plasma Physics Lab N.J. DEP recognizes PPPL as state's top environmental steward By Jeanne Jackson DeVoe May 21, 2013 Tweet Widget Google Plus One Share on Facebook Adam Cohen, center, PPPL's Deputy Director for Operations, and other PPPL employees clean up the grounds to celebrate Earth Week last month. Some 32 volunteers collected 350 pounds of trash and 35 pounds of leaves for composting. PPPL's composting and recycling efforts resulted in a 40 percent reduction in the amount of trash

  6. Uranium Marketing Annual Report -

    Gasoline and Diesel Fuel Update (EIA)

    3. Uranium purchased by owners and operators of U.S. civilian nuclear power reactors by origin country and delivery year, 2010-14 thousand pounds U3O8 equivalent; dollars per pound U3O8 equivalent Deliveries in 2010 Deliveries in 2011 Deliveries in 2012 Deliveries in 2013 Deliveries in 2014 Origin country Purchases Weighted-average price Purchases Weighted-average price Purchases Weighted-average price Purchases Weighted-average price Purchases Weighted-average price Australia 7,112 51.35 6,001

  7. Uranium Marketing Annual Report -

    Gasoline and Diesel Fuel Update (EIA)

    5. Average price and quantity for uranium purchased by owners and operators of U.S. civilian nuclear power reactors by pricing mechanisms and delivery year, 2013-14 dollars per pound U3O8 equivalent; thousand pounds U3O8 equivalent Pricing mechanisms Domestic purchases1 Foreign purchases2 Total purchases 2013 2014 2013 2014 2013 2014 Contract-specified (fixed and base-escalated) pricing Weighted-average price 54.95 41.87 55.03 49.87 54.99 45.47 Quantity with reported price 14,530 15,711 14,732

  8. Uranium Marketing Annual Report -

    Gasoline and Diesel Fuel Update (EIA)

    a. Uranium purchased by owners and operators of U.S. civilian nuclear power reactors ranked by price and distributed by quantity, 2012-14 deliveries thousand pounds U3O8 equivalent; dollars per pound U3O8 equivalent Deliveries in 2012 Deliveries in 2013 Deliveries in 2014 Quantity 1 distribution Quantity with reported price Weighted-average price Quantity with reported price Weighted-average price Quantity with reported price Weighted-average price First 7,119 38.24 7,175 34.24 6,665 30.26

  9. Uranium Marketing Annual Report -

    Gasoline and Diesel Fuel Update (EIA)

    7. Uranium purchased by owners and operators of U.S. civilian nuclear power reactors by contract type and material type, 2014 deliveries thousand pounds U3O8 equivalent; dollars per pound U3O8 equivalent Spot 1 Contracts Long-Term Contracts 2 Total Material Type Quantity with reported price Weighted-average price Quantity with reported price Weighted-average price Quantity with reported price Weighted-average price U3O8 8,440 38.38 20,820 47.57 29,260 44.92 Natural UF6 4,405 35.30 13,373 53.13

  10. Uranium Marketing Annual Report -

    Gasoline and Diesel Fuel Update (EIA)

    8. Contracts signed in 2014 by owners and operators of U.S. civilian nuclear power reactors by contract type thousand pounds U3O8 equivalent; dollars per pound U3O8 equivalent Purchase contract type (Signed in 2014) Quantity of deliveries received in 2014 Weighted-average price Number of purchase contracts for deliveries in 2014 Spot W W 67 Long-term W W 2 Total 12,263 34.83 69 W = Data withheld to avoid disclosure of individual company data. Notes: Totals may not equal sum of components because

  11. Recovery Act Workers Remediate and Restore Former Waste Sites, Help Reduce

    Office of Environmental Management (EM)

    Cold War Footprint | Department of Energy Remediate and Restore Former Waste Sites, Help Reduce Cold War Footprint Recovery Act Workers Remediate and Restore Former Waste Sites, Help Reduce Cold War Footprint The Hanford Site is looking greener these days after American Recovery and Reinvestment Act workers revegetated 166 acres across 12 waste sites, planting over 1,100 pounds of seeds and about 280,000 pounds of mulch. The largest of the sites, known as the BC Control Area, is an

  12. ARM - Facility News Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    October 8, 2012 [Facility News] Near Miss at Barrow Due to Beach Erosion Bookmark and Share With a little help from his friends, Walter Brower (hidden by the ECOR) moves the system away from the ocean's edge as an early September storm pounds away at the beach. With a little help from his friends, Walter Brower (hidden by the ECOR) moves the system away from the ocean's edge as an early September storm pounds away at the beach. On a stormy Friday evening in early September, Walter Brower

  13. ARM - Facility News Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    November 9, 2012 [Facility News] Unmanned Aircraft Test Flights Completed at Oliktok Point Bookmark and Share Because of its small size and light weight (72-inch wingspan and weighing about 22 pounds), the Bat-3 is launched using a bungee-powered catapult from the roof of a vehicle and can land autonomously on fixed wheels. Its modular design fits into two suitcase-sized containers. Because of its small size and light weight (72-inch wingspan and weighing about 22 pounds), the Bat-3 is launched

  14. Texas Hydrogen Highway Fuel Cell Hybrid Bus and Fueling Infrastructure Technology Showcase - Final Scientific/Technical Report

    SciTech Connect (OSTI)

    Hitchcock, David

    2012-06-29

    The Texas Hydrogen Highway project has showcased a hydrogen fuel cell transit bus and hydrogen fueling infrastructure that was designed and built through previous support from various public and private sector entities. The aim of this project has been to increase awareness among transit agencies and other public entities on these transportation technologies, and to place such technologies into commercial applications, such as a public transit agency. The initial project concept developed in 2004 was to show that a skid-mounted, fully-integrated, factory-built and tested hydrogen fueling station could be used to simplify the design, and lower the cost of fueling infrastructure for fuel cell vehicles. The approach was to design, engineer, build, and test the integrated fueling station at the factory then install it at a site that offered educational and technical resources and provide an opportunity to showcase both the fueling station and advanced hydrogen vehicles. The two primary technology components include: Hydrogen Fueling Station: The hydrogen fueling infrastructure was designed and built by Gas Technology Institute primarily through a funding grant from the Texas Commission on Environmental Quality. It includes hydrogen production, clean-up, compression, storage, and dispensing. The station consists of a steam methane reformer, gas clean-up system, gas compressor and 48 kilograms of hydrogen storage capacity for dispensing at 5000 psig. The station is skid-mounted for easy installation and can be relocated if needed. It includes a dispenser that is designed to provide temperaturecompensated fills using a control algorithm. The total station daily capacity is approximately 50 kilograms. Fuel Cell Bus: The transit passenger bus built by Ebus, a company located in Downey, CA, was commissioned and acquired by GTI prior to this project. It is a fuel cell plug-in hybrid electric vehicle which is ADA compliant, has air conditioning sufficient for Texas operations, and regenerative braking for battery charging. It uses a 19.3 kW Ballard PEM fuel cell, will store 12.6 kg of hydrogen at 350 Bar, and includes a 60 kWh battery storage system. The objectives of the project included the following: (a) To advance commercialization of hydrogen-powered transit buses and supporting infrastructure; (b) To provide public outreach and education by showcasing the operation of a 22-foot fuel cell hybrid shuttle bus and Texas first hydrogen fueling infrastructure; and (c) To showcase operation of zero-emissions vehicle for potential transit applications. As mentioned above, the project successfully demonstrated an early vehicle technology, the Ebus plug-in hybrid fuel cell bus, and that success has led to the acquisition of a more advanced vehicle that can take advantage of the same fueling infrastructure. Needed hydrogen station improvements have been identified that will enhance the capabilities of the fueling infrastructure to serve the new bus and to meet the transit agency needs. Over the course of this project, public officials, local government staff, and transit operators were engaged in outreach and education activities that acquainted them with the real world operation of a fuel cell bus and fueling infrastructure. Transit staff members in the Dallas/Ft. Worth region were invited to a workshop in Arlington, Texas at the North Central Texas Council of Governments to participate in a workshop on hydrogen and fuel cells, and to see the fuel cell bus in operation. The bus was trucked to the meeting for this purpose so that participants could see and ride the bus. Austin area transit staff members visited the fueling site in Austin to be briefed on the bus and to participate in a fueling demonstration. This led to further meetings to determine how a fuel cell bus and fueling station could be deployed at Capital Metro Transit. Target urban regions that expressed additional interest during the project in response to the outreach meetings and showcase events include San Antonio and Austin, Texas. In summary, the project objectives were achieved in the following ways: Through presentations and papers provided to a variety of audiences in multiple venues, the project team fulfilled its goal of providing education and outreach on hydrogen technology to statewide audiences. The project team generated interest that exists well beyond the completion of the project, and indeed, helped to generate financial support for a subsequent hydrogen vehicle project in Austin. The University of Texas, Center for ElectroMechanics operated the fuel cell-electric Ebus vehicle for over 13,000 miles in Austin, Texas in a variety of routes and loading configurations. The project took advantage of prior efforts that created a hydrogen fueling station and fuel cell electric-hybrid bus and continued to verify their technical foundation, while informing and educating potential future users of how these technologies work.

  15. Space debris removal using a high-power ground-based laser

    SciTech Connect (OSTI)

    Monroe, D.K.

    1993-08-01

    The feasibility of utilizing a ground-based laser without an orbital mirror for space debris removal is examined. Technical issues include atmospheric transmission losses, adaptive-optics corrections of wavefront distortions, laser field of view limitations, and laser-induced impulse generation. The physical constraints require a laser with megawatt output, long run-time capability, and wavelength with good atmospheric transmission characteristics. It is found that a 5-MW reactor-pumped laser can deorbit debris having masses of the order of one kilogram from orbital altitudes to be used by Space Station Freedom. Debris under one kilogram can be deorbited after one pass over the laser site, while larger debris can be deorbited or transferred to alternate orbits after multiple passes over the site.

  16. United States Department of Energy Southwestern Power Administration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Separated Plutonium | National Nuclear Security Administration Collaborates with Switzerland to Remove Last Remaining Separated Plutonium March 03, 2016 (WASHINGTON, D.C.) - The Department of Energy's National Nuclear Security Administration (NNSA), working in collaboration with the Government of Switzerland, announced that approximately 20 kilograms of separated plutonium have been transported from Switzerland to the United States. The successful transport of this plutonium was completed

  17. The Treatment of Solar Generation in Electric Utility Resource Planning (Presentation), NREL (National Renewable Energy Laboratory)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Thorium Fuel Cycle Pilot Experiences at Oak Ridge National Laboratory E. D. Collins, B. D. Patton, A. M. Krichinsky, and D. F. Williams Oak Ridge National Laboratory, 1 Bethel Valley Rd., Oak Ridge, TN 37831-6423 collinsed@ornl.gov INTRODUCTION Thorium-uranium-233 fuels were processed at the Oak Ridge National Laboratory Radiochemical Pilot Plant, in kilogram-scale operations from 1954 to 19861. These operations were primarily aqueous separations and allied conversion technologies and included

  18. Fabrication of thorium bearing carbide fuels

    DOE Patents [OSTI]

    Gutierrez, R.L.; Herbst, R.J.; Johnson, K.W.R.

    Thorium-uranium carbide and thorium-plutonium carbide fuel pellets have been fabricated by the carbothermic reduction process. Temperatures of 1750/sup 0/C and 2000/sup 0/C were used during the reduction cycle. Sintering temperatures of 1800/sup 0/C and 2000/sup 0/C were used to prepare fuel pellet densities of 87% and > 94% of theoretical, respectively. The process allows the fabrication of kilogram quantities of fuel with good reproductibility of chemical and phase composition.

  19. LANL disassembles "pits," makes mixed-oxide fuel

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    disassembles "pits" LANL disassembles "pits," makes mixed-oxide fuel LANL has successfully disassembled nuclear weapons "pits" and converted them into more than 240 kilograms of plutonium oxide. October 7, 2011 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and new

  20. Symmetries in Nature A glimpse into the beauty and art of science

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Switzerland United States Collaborates with Switzerland to Remove Last Remaining Separated Plutonium (WASHINGTON, D.C.) - The Department of Energy's National Nuclear Security Administration (NNSA), working in collaboration with the Government of Switzerland, announced that approximately 20 kilograms of separated plutonium have been transported from Switzerland to the United States. The... Last HEU Removed from Switzerland under NNSA Collaboration WASHINGTON, D.C. - The Department of Energy's

  1. Switzerland | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    Switzerland United States Collaborates with Switzerland to Remove Last Remaining Separated Plutonium (WASHINGTON, D.C.) - The Department of Energy's National Nuclear Security Administration (NNSA), working in collaboration with the Government of Switzerland, announced that approximately 20 kilograms of separated plutonium have been transported from Switzerland to the United States. The... Last HEU Removed from Switzerland under NNSA Collaboration WASHINGTON, D.C. - The Department of Energy's

  2. 2D Monolayers Could Yield Thinnest Solar Cells Ever

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Thinnest solar cells ever 2D Monolayers Could Yield Thinnest Solar Cells Ever October 21, 2013 Contact: Kathy Kincade, +1 510 495 2124, kkincade@lbl.gov Efforts to improve solar cells have historically focused on improving energy conversion efficiencies and lowering manufacturing costs. But new computer simulations have shown how using a different type of material could yield thinner, more lightweight solar panels that provide power densities - watts per kilogram of material - orders of

  3. Iyer, Woldegabriel recognized for helping New Mexico small businesses

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Security Administration Highly Enriched Uranium and Plutonium Removals March 24, 2014 Italy has been a global leader in nuclear nonproliferation, working with the United States since 1997 to eliminate more than 100 kilograms of highly enriched uranium (HEU) and separated plutonium. At the 2014 Nuclear Security Summit, the United States and Italy announced the successful removal of all eligible fresh HEU and plutonium from Italy. These shipments were completed via a joint effort between the

  4. EA-2024: Gap Material Plutonium- Transport, Receipt, and Processing

    Broader source: Energy.gov [DOE]

    This environmental assessment evaluates the potential environmental impacts associated with transporting up to 900 kilograms of plutonium from foreign nations to the United States, storing the plutonium at the Savannah River Site in South Carolina, and processing it for disposition. This action would be pursued only if it is determined that there is no other reasonable pathway to assure security of this plutonium from theft or diversion.

  5. United States Collaborates with Switzerland to Remove Last Remaining

    National Nuclear Security Administration (NNSA)

    Separated Plutonium | National Nuclear Security Administration United States Collaborates with Switzerland to Remove Last Remaining Separated Plutonium March 03, 2016 (WASHINGTON, D.C.) - The Department of Energy's National Nuclear Security Administration (NNSA), working in collaboration with the Government of Switzerland, announced that approximately 20 kilograms of separated plutonium have been transported from Switzerland to the United States. The successful transport of this plutonium

  6. EA-2024: Final Environmental Assessment | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Final Environmental Assessment EA-2024: Final Environmental Assessment Gap Material Plutonium - Transport, Receipt, and Processing The U.S. Department of Energy, National Nuclear Security Administration, has prepared this environmental assessment to evaluate the potential environmental impacts associated with transporting up to 900 kilograms of plutonium from foreign nations to the United States, storing the plutonium at the Savannah River Site in South Carolina, and processing it for

  7. EA-2024: Finding of No Significant Impact | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Finding of No Significant Impact EA-2024: Finding of No Significant Impact Gap Material Plutonium - Transport, Receipt, and Processing Based on the analysis in the environmental assessment, the U.S. Department of Energy, National Nuclear Security Administration (NNSA), issued this finding of no significant impact for transporting up to 900 kilograms of plutonium from foreign countries to the Savannah River Site in South Carolina for storage and processing pending final disposition. NNSA will

  8. Light-water reactors: preliminary safety and environmental information document. Volume I

    SciTech Connect (OSTI)

    Not Available

    1980-01-01

    Information is presented concerning the reference PWR reactor system; once-through, low-enrichment uranium-235 fuel, 30 MWD per kilogram (PWR LEU(5)-OT); once-through, low-enrichment, high-burnup uranium fuel (PWR LEU(5)-Mod OT); self-generated plutonium spiked recycle (PWR LEU(5)-Pu-Spiked Recycle); denatured uranium-233/thorium cycle (PWR DU(3)-Th Recycle DU(3)); and plutonium/thorium cycle (Pu/ThO/sub 2/ Burner).

  9. Italy Highly Enriched Uranium and Plutonium Removals | National Nuclear

    National Nuclear Security Administration (NNSA)

    Security Administration Highly Enriched Uranium and Plutonium Removals March 24, 2014 Italy has been a global leader in nuclear nonproliferation, working with the United States since 1997 to eliminate more than 100 kilograms of highly enriched uranium (HEU) and separated plutonium. At the 2014 Nuclear Security Summit, the United States and Italy announced the successful removal of all eligible fresh HEU and plutonium from Italy. These shipments were completed via a joint effort between the

  10. Process for the synthesis of aliphatic alcohol-containing mixtures

    DOE Patents [OSTI]

    Greene, Marvin I.; Gelbein, Abraham P.

    1984-01-01

    A process for the synthesis of mixtures which include saturated aliphatic alcohols is disclosed. In the first step of the process, the first catalyst activation stage, a catalyst, which comprises the oxides of copper, zinc, aluminum, potassium and one or two additional metals selected from the group consisting of chromium, magnesium, cerium, cobalt, thorium and lanthanum, is partially activated. In this step, a reducing gas stream, which includes hydrogen and at least one inert gas, flows past the catalyst at a space velocity of up to 5,000 liters (STP) per hour, per kilogram of catalyst. The partially activated catalyst is then subjected to the second step of the process, second-stage catalyst activation. In this step, the catalyst is contacted by an activation gas stream comprising hydrogen and carbon monoxide present in a volume ratio of 0.5:1 and 4:1, respectively, at a temperature of 200.degree. to 450.degree. C. and a pressure of between 35 and 200 atmospheres. The activation gas flows at a space velocity of from 1,000 to 20,000 liters (STP) per hour, per kilogram of catalyst. Second-stage activation continues until the catalyst is contacted with at least 500,000 liters (STP) of activation gas per kilogram of catalyst. The fully activated catalyst, in the third step of the process, contacts a synthesis gas stream comprising hydrogen and carbon monoxide.

  11. Process for the synthesis of aliphatic alcohol-containing mixtures

    DOE Patents [OSTI]

    Greene, M.I.; Gelbein, A.P.

    1984-10-16

    A process for the synthesis of mixtures which include saturated aliphatic alcohols is disclosed. In the first step of the process, the first catalyst activation stage, a catalyst, which comprises the oxides of copper, zinc, aluminum, potassium and one or two additional metals selected from the group consisting of chromium, magnesium, cerium, cobalt, thorium and lanthanum, is partially activated. In this step, a reducing gas stream, which includes hydrogen and at least one inert gas, flows past the catalyst at a space velocity of up to 5,000 liters (STP) per hour, per kilogram of catalyst. The partially activated catalyst is then subjected to the second step of the process, second-stage catalyst activation. In this step, the catalyst is contacted by an activation gas stream comprising hydrogen and carbon monoxide present in a volume ratio of 0.5:1 and 4:1, respectively, at a temperature of 200 to 450 C and a pressure of between 35 and 200 atmospheres. The activation gas flows at a space velocity of from 1,000 to 20,000 liters (STP) per hour, per kilogram of catalyst. Second-stage activation continues until the catalyst is contacted with at least 500,000 liters (STP) of activation gas per kilogram of catalyst. The fully activated catalyst, in the third step of the process, contacts a synthesis gas stream comprising hydrogen and carbon monoxide.

  12. Corrective Action Decision Document/Closure Report for Corrective Action Unit 560: Septic Systems, Nevada Test Site, Nevada, Revision 0

    SciTech Connect (OSTI)

    Grant Evenson

    2010-04-01

    Corrective Action Unit560 comprises seven corrective action sites (CASs): 03-51-01, Leach Pit 06-04-02, Septic Tank 06-05-03, Leach Pit 06-05-04, Leach Bed 06-59-03, Building CP-400 Septic System 06-59-04, Office Trailer Complex Sewage Pond 06-59-05, Control Point Septic System The purpose of this CADD/CR is to provide justification and documentation supporting the recommendation for closure of CAU 560 with no further corrective action. To achieve this, corrective action investigation (CAI) activities were performed from October 7, 2008, through February 24, 2010, as set forth in the Corrective Action Investigation Plan for Corrective Action Unit560: Septic Systems, Nevada Test Site, Nevada, and Record of Technical Change No.1. The purpose of the CAI was to fulfill the following data needs as defined during the data quality objective (DQO) process: Determine whether contaminants of concern (COCs) are present. If COCs are present, determine their nature and extent. Provide sufficient information and data to complete appropriate corrective actions. The CAU 560 dataset from the investigation results was evaluated based on the data quality indicator parameters. This evaluation demonstrated the quality and acceptability of the dataset for use in fulfilling the DQO data needs. Analytes detected during the CAI were evaluated against final action levels (FALs) established in this document. The following contaminants were determined to be present at concentrations exceeding their corresponding FALs: No contamination exceeding the FALs was identified at CASs 03-51-01, 06-04-02, and06-59-04. The soil at the base of the leach pit chamber at CAS06-05-03 contains arsenic above the FAL of 23 milligrams per kilogram (mg/kg) and polychlorinated biphenyl (PCBs) above the FAL of 0.74 mg/kg, confined vertically from a depth of approximately 5 to 20 feet (ft) below ground surface. The contamination is confined laterally to the walls of the leach pit chamber and leach rock. The contamination present at CAS 06-05-03 within the leach pit was not feasible to remove. The surface and subsurface soils within and surrounding the septic system at CAS 06-05-04 contained PCB concentrations above the FAL of 0.74 mg/kg. Thelateral and vertical extent of COCs was determined for this CAS. Contaminated soils were removed up to within 18 ft of the building. The remaining contamination is confined to subsurface soils adjacent to and beneath BuildingCP-162 and was not feasible to remove. The solid materials within the septic tank and soils immediately surrounding the inlet end of the tank at CAS 06-59-03 contained benzo(a)pyrene above the FAL of 0.21 mg/kg. The soils, tank contents, and tank were removed. Materials remaining at this CAS do not contain contamination exceeding FALs. The solids contained within the septic tank and inlet pipe at CAS 06-59-05 contained the following contaminants above their respective FALs: PCBs, arsenic, lead, benzo(a)pyrene, and pesticides. The tank and inlet pipe contents were removed. Materials remaining at this CAS do not contain contamination exceeding FALs. Therefore, the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office (NNSA/NSO) provides the following corrective action recommendations: No further action for CASs 03-51-01, 06-04-02, and 06-59-04, as no contaminants of potential concern were present that exceed FALs. Closure in place for CAS 06-05-03 under a corrective action with a use restriction (UR) for remaining PCB- and arsenic-impacted potential source material (PSM). The UR form and map have been filed in the NNSA/NSO Facility Information Management System, the FFACO database, and NNSA/NSO CAU/CAS files. Closure in place for CAS 06-05-04 under a corrective action with a UR for remaining PCBs in soil adjacent to and beneath Building CP-162. The UR form and map have been filed in the NNSA/NSO Facility Information Management System, the FFACO database, and NNSA/NSO CAU/CAS files. No further action for CAS 06-59-0

  13. GLASS FORMULATION TESTING TO INCREASE SULFATE INCORPORATION - Final Report VSL-04R4960-1, Rev 0, 2/28/05, Vitreous State Laboratory, The Catholic University of American, Washington, D.C.

    SciTech Connect (OSTI)

    KRUGER AA; MATLACK KS

    2012-02-07

    About 50 million gallons of high-level mixed waste is currently in storage in underground tanks at The United States Department of Energy's (DOE's) Hanford site in the State of Washington. The Hanford Tank Waste Treatment and Immobilization Plant (WTP) will provide DOE's Office of River Protection (ORP) with a means of treating this waste by vitrification for subsequent disposal. The tank waste will be separated into low- and high-activity fractions, which will then be vitrified respectively into Immobilized Low Activity Waste (ILAW) and Immobilized High Level Waste (IHLW) products. The ILAW product will be disposed of in an engineered facility on the Hanford site while the IHLW product will be directed to the national deep geological disposal facility for high-level nuclear waste. The ILAW and IHLW products must meet a variety of requirements with respect to protection of the environment before they can be accepted for disposal. The Office of River Protection is currently examining options to optimize the Low Activity Waste (LAW) facility and the LAW glass waste form. One option under evaluation is to enhance the waste processing rate of the vitrification plant currently under construction. It is likely that the capacity of the LAW vitrification plant can be increased incrementally by implementation of a variety of low-risk, high-probability changes, either separately or in combination. These changes include: (1) Operating at the higher processing rates demonstrated at the LAW Pilot Melter; (2) Increasing the glass pool surface area within the existing external melter envelope; (3) Increasing plant availability; (4) Increasing the glass waste loading; (5) Removing sulfate from the LAW stream; (6) Operating the melter at slightly higher temperature; (7) Installing the third LAW melter into the WTP plant; and (8) Other smaller impact changes. The melter tests described in this report utilized blended feed (glass formers plus waste simulant) prepared by Optima Chemicals according to VSL specifications. Sufficient feed was prepared to produce over nineteen hundred kilograms of glass during melter tests. The nominal reductant concentration (stoichiometric ratio of 0.5 {approx} 1 mole sucrose per 16 mole NOx or 3 mole carbon per 4 mole NOx) was maintained in all the tests by the addition of sugar at VSL. The DM 10 was used to screen the optimized glass formulation with two alternative aluminum sources (kyanite and zeolite) over a wide range of target sulfur concentrations. Subsequently, based on the DM10 results, nine 12- to 34-hour DM100 tests were conducted; six with kyanite as the aluminum additive at glass sulfur concentrations ranging from 0.75 to 1.5 wt.% SO{sub 3}, and the other three with zeolite as the aluminum additive at glass sulfur concentrations ranging from 0.75 to 1.5 wt. % SO{sub 3}. The DM 100-WV melter was used in order to provide a direct comparison with the LAW tests previously conducted on the same melter. Key operating parameters such as glass temperature and production rate were held constant to investigate the sulfur incorporation into the glass and the effects of varying the aluminum additive source. The bubbling rate was adjusted to achieve a production rate of 2000 kg/m{sup 2}/day with a near-complete cold cap (90-100% of melt surface covered with feed). Quantitative measurements of glass production rates, melter operating conditions (temperatures, pressures, power, flows, etc.), and off-gas characteristics (NOx, SO{sub 2}, CO, particulate load and composition, and acid gases) were made for each test. Glass samples taken from the glass pool and the discharge chamber were inspected throughout testing to determine the limit of salt-free operation in the melter.

  14. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Alternative Fuel Vehicle (AFV) Acquisition Goal North Carolina established a goal that at least 75% of new or replacement state government light-duty cars and trucks with a gross vehicle weight rating of 8,500 pounds or less must be AFVs or low emission vehicles. (Reference North Carolina General Statutes 143-215.107C)

  15. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Idle Reduction Weight Exemption A vehicle equipped with a fully functional idle reduction system designed to reduce fuel use and emissions from engine idling may exceed the maximum weight limitations by up to 400 pounds to accommodate the added weight of the idle reduction technology. (Reference Oregon Revised Statutes 818.03

  16. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Idle Reduction Weight Exemption Any vehicle equipped with qualifying idle reduction technology may exceed the state's gross vehicle weight limits by up to 400 pounds to compensate for the additional weight of the idle reduction technology. Upon request, vehicle operators must provide proof that the idle reduction technology is fully functional. (Reference Texas Statutes, Transportation Code 622.955

  17. TO: FILE FROM: SUBJECT:

    Office of Legacy Management (LM)

    ... Three 6OUOs6 weF6 atilieed aE.fOllOWSt;, ,,.,"' ':- ,.' .(a), .Dupont,.Co. (Pebs Pig&>,6 Dept.);' TNapulp Or.60 Yaqxc&>? acid a&e was purchased In L&h, lQ41.,at 12-l& per pound ...

  18. SEP Success Story: Washington State Becomes Largest Public Consumer of Biodiesel

    Broader source: Energy.gov [DOE]

    Thanks to a $165,000 Recovery Act loan through the State Energy Program, Washington State Ferries run on a blended biodiesel fuel that will prevent over 65 million pounds of carbon dioxide from being emitted into the environment each year. Learn more.

  19. Revised Emergency Planning and Community Right-to-Know Act (EPCRA), Section 313, Toxic Chemical Release reporting for calendar year 1998

    SciTech Connect (OSTI)

    Evans, R.A.

    2000-01-01

    This report contains forms which contain information on the physical location of the Y-12 Plant and the amount of lead that was released to the East Fork Poplar Creek and amounts transferred to landfills on-site as well as landfills in Texas and South Carolina. Amounts are given in pounds per year.

  20. Field Trip to EM’s Idaho Treatment Facility is Students’ High Point of Class

    Broader source: Energy.gov [DOE]

    IDAHO FALLS, Idaho – For graduate students in Dr. Mary Lou Dunzik-Gougar’s Idaho State University (ISU) radioactive waste management class, waste treatment takes on a new meaning when watching the Supercompactor transform a 725-pound, 35-inch-tall, 55-gallon drum into what looks like a 7-inch-tall, 2-foot-diameter hockey puck.

  1. Activated carbon injection - a mercury control success story

    SciTech Connect (OSTI)

    2008-07-01

    Almost 100 full-scale activated carbon injection (ACI) systems have been ordered by US electric utilities. These systems have the potential to remove over 90% of the mercury in flue, at a cost below $10,000 per pound of mercury removal. Field trials of ACI systems arm outlined. 1 fig.

  2. Demand for Food for People in Need Remains High Throughout the Year

    Broader source: Energy.gov [DOE]

    WASHINGTON, D.C. – EM and its field sites donated 53,630 pounds — or 27 tons — of non-perishable items to a food drive by federal workers to help feed families across the country in 2013.

  3. West Valley Demonstration Project Food Drive Delivers Food for 700 Families

    Broader source: Energy.gov [DOE]

    WEST VALLEY, N.Y. – EM employees at West Valley Demonstration Project (WVDP) helped collect and deliver 114,843 pounds of food, including 360 turkeys, to nine food pantries in the West Valley area, just in time to benefit about 700 families in need during the holidays.

  4. Thanksgiving Goodwill: West Valley Demonstration Project Food Drive Provides 640 Turkeys to People in Need

    Broader source: Energy.gov [DOE]

    WEST VALLEY, N.Y. – Just in time for the holidays, eight local food pantries received 640 turkeys, 1,800 pounds of potatoes and other items, thanks to an effort by EM employees and contractors supporting cleanup at West Valley Demonstration Project (WVDP) and other volunteers.

  5. EM Makes Strong Showing in Federal Food Drive

    Broader source: Energy.gov [DOE]

    WASHINGTON, D.C. – EM made a strong showing in this year’s Feds Feed Families drive, contributing 46,493 pounds of food across the DOE complex and topping it off by winning top prize in a government-wide chili cookoff held at the Department’s headquarters.

  6. NETL - Chemical Looping Reactor

    ScienceCinema (OSTI)

    None

    2014-06-26

    NETL's Chemical Looping Reactor unit is a high-temperature integrated CLC process with extensive instrumentation to improve computational simulations. A non-reacting test unit is also used to study solids flow at ambient temperature. The CLR unit circulates approximately 1,000 pounds per hour at temperatures around 1,800 degrees Fahrenheit.

  7. Pechiney Rolled Products: Plant-Wide Energy Assessment Identifies Opportunities to Optimize Aluminum Casting and Rolled Operations

    SciTech Connect (OSTI)

    2004-07-01

    A Pechiney Rolled Products plant focused on various aluminum casting processes during a PWA. The assessment revealed potential annual savings of 460,000 MMBtu in natural gas, 9.6 million kWh in electricity, 69 million pounds in CO2, and $2.5 million.

  8. Engineering scale development of the vapor-liquid-solid (VLS) process for the production of silicon carbide fibrils. Phase 2

    SciTech Connect (OSTI)

    Ohnsorg, R.W.; Hollar, W.E. Jr.; Lau, S.K.; Ko, F.K.; Schatz, K.

    1995-04-01

    As reinforcements for composites, VLS SiC fibrils have attractive mechanical properties including high-strength, high modulus, and excellent creep resistance. To make use of their excellent mechanical properties in a composite, a significant volume fraction (>10%) of aligned, long fibrils (>2 mm) needs to be consolidated in the ceramic matrix. The fibrils must be processed into an assembly that will allow for composite fabrication while maintaining fibril alignment and length. With Advanced Product Development (APD) as the yam fabrication subcontractor, Carborundum investigated several approaches to achieve this goaL including traditional yam-forming processes such as carding and air-vortex spinning and nontraditional processes such as tape forming and wet casting. Carborundum additionally performed an economic analysis for producing 500 and 10,000 pounds of SiC fibrils annually using both conservative and more aggressive processing parameters. With the aggressive approach, the projected costs for SiC fibril production for 500 and 10,000 pounds per year are $1,340/pound and $340/pound, respectively.

  9. NETL - Chemical Looping Reactor

    SciTech Connect (OSTI)

    2013-07-24

    NETL's Chemical Looping Reactor unit is a high-temperature integrated CLC process with extensive instrumentation to improve computational simulations. A non-reacting test unit is also used to study solids flow at ambient temperature. The CLR unit circulates approximately 1,000 pounds per hour at temperatures around 1,800 degrees Fahrenheit.

  10. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Weight Restriction Increase for Natural Gas Vehicles A vehicle fueled by compressed natural gas may exceed the gross vehicle weight restrictions by 2,000 pounds, except on the interstate system or a highway, road, or bridge that is subject to maximum weight restrictions. (Reference Ohio Revised Code 5577.044

  11. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Liquefied Natural Gas (LNG) Measurement LNG is taxed based on the gasoline gallon equivalent, or 6.6 pounds of LNG for one gallon of motor fuel, unless a diesel gallon equivalent is established by the national conference on weights and measures. (Reference Ohio Revised Code 5735.012 and 5735.013

  12. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Compressed Natural Gas (CNG) and Propane Tax Retail sales for CNG and liquefied petroleum gas (propane) used to operate vehicles are subject to a modified tax based on energy content. CNG is taxed per 120 cubic feet, measured at 14.73 pounds per square inch absolute base pressure. (Reference Montana Code Annotated 15-70-711

  13. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Compressed Natural Gas (CNG) Tax CNG used in motor vehicles is subject to a state motor fuel tax rate of $0.26 per gasoline gallon equivalent (GGE). For taxation purposes, one GGE is equal to 5.66 pounds or 126.67 standard cubic feet of natural gas. (Reference House Bill 5466, 2014, and Special Notice 2014-2

  14. Appendix A: Reference case

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    12.92 12.90 13.09 -0.2% 1 Commercial trucks 8,501 to 10,000 pounds gross vehicle weight rating. 2 CAFE standard based on projected new vehicle sales. 3 Includes CAFE credits for...

  15. Method for releasing hydrogen from ammonia borane

    DOE Patents [OSTI]

    Varma, Arvind; Diwan, Moiz; Shafirovich, Evgeny; Hwang, Hyun-Tae; Al-Kukhun, Ahmad

    2013-02-19

    A method of releasing hydrogen from ammonia borane is disclosed. The method comprises heating an aqueous ammonia borane solution to between about 80-135.degree. C. at between about 14.7 and 200 pounds per square inch absolute (psia) to release hydrogen by hydrothermolysis.

  16. One Man's Trash is Another Man's Fuel

    Broader source: Energy.gov [DOE]

    The average American throws away more than 900 pounds of trash every year, and as the organic waste degrades it produces methane gas. Some landfills are now exploring ways to use it rather than venting the gas directly into the atmosphere.

  17. The Ames Project (1942-1946) | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The Ames Project (1942-1946) The Ames Laboratory was officially founded on May 17, 1947, following development of a process to purify uranium metal for the historic Manhattan Project. From 1942 to 1946, Ames Lab scientists produced over two-million pounds of uranium metal. This video details that work and has interviews with some of the researchers involved in the project.

  18. ALTERNATIVE FIELD METHODS TO TREAT MERCURY IN SOIL

    SciTech Connect (OSTI)

    Ernest F. Stine Jr; Steven T. Downey

    2002-08-14

    U.S. Department of Energy (DOE) used large quantities of mercury in the uranium separating process from the 1950s until the late 1980s in support of national defense. Some of this mercury, as well as other hazardous metals and radionuclides, found its way into, and under, several buildings, soil and subsurface soils and into some of the surface waters. Several of these areas may pose potential health or environmental risks and must be dealt with under current environmental regulations. DOE's National Energy Technology Laboratory (NETL) awarded a contract ''Alternative Field Methods to Treat Mercury in Soil'' to IT Group, Knoxville TN (IT) and its subcontractor NFS, Erwin, TN to identify remedial methods to clean up mercury-contaminated high-clay content soils using proven treatment chemistries. The sites of interest were the Y-12 National Security Complex located in Oak Ridge, Tennessee, the David Witherspoon properties located in Knoxville, Tennessee, and at other similarly contaminated sites. The primary laboratory-scale contract objectives were (1) to safely retrieve and test samples of contaminated soil in an approved laboratory and (2) to determine an acceptable treatment method to ensure that the mercury does not leach from the soil above regulatory levels. The leaching requirements were to meet the TC (0.2 mg/l) and UTS (0.025 mg/l) TCLP criteria. In-situ treatments were preferred to control potential mercury vapors emissions and liquid mercury spills associated with ex-situ treatments. All laboratory work was conducted in IT's and NFS laboratories. Mercury contaminated nonradioactive soil from under the Alpha 2 building in the Y-12 complex was used. This soils contained insufficient levels of leachable mercury and resulted in TCLP mercury concentrations that were similar to the applicable LDR limits. The soil was spiked at multiple levels with metallic (up to 6000 mg/l) and soluble mercury compounds (up to 500 mg/kg) to simulate expected ranges of mercury contamination and to increase the TCLP mercury values. IT/NFS investigated ambient temperature amalgamation/stabilization/fixation of mercury-contaminated soils to meet these objectives. Treatment ranged in size from a few ounces to 10 pounds. The treatability study philosophy was to develop working envelops of formulations where reasonable minimum and maximum amounts of each reagent that would successfully treat the contaminated soil were determined. The dosages investigated were based on ratios of stoichiometric reactions and applications of standard sets of formulations. The approach purposely identified formulations that failed short or longer cure-time performance criteria to define the limits of the envelope. Reagent envelops successfully met the project requirements one day after treatment and after greater than 30-day cures. The use of multiple levels of spikes allowed the establishment of reagent dosages that were successful across a broad range of mercury values, e.g., 50 to 6000 mg/kg mercury. The treatment products were damp to slightly wet material. Enough drying reagent, e.g., Portland cement or lime by-product, were added to some formulations to control the leachability of uranium and other hazardous metals and to ensure the product passed the paint filter test. Cost analyzes and conceptual designs for four alternatives for full-scale treatments were prepared. The alternatives included two in-situ treatments and two ex-situ treatments. The cost estimates were based on the results from the bench-scale study. All four alternatives treatment costs were well below the baseline costs.

  19. PORTABLE ACOUSTIC MONITORING PACKAGE (PAMP)

    SciTech Connect (OSTI)

    John l. Loth; Gary J. Morris; George M. Palmer; Richard Guiler; Deepak Mehra

    2003-07-01

    The 1st generation acoustic monitoring package was designed to detect and analyze weak acoustic signals inside natural gas transmission lines. Besides a microphone it housed a three-inch diameter aerodynamic acoustic signal amplifier to maximize sensitivity to leak induced {Delta}p type signals. The theory and test results of this aerodynamic signal amplifier was described in the master's degree thesis of our Research Assistant Deepak Mehra who is about to graduate. To house such a large three-inch diameter sensor required the use of a steel 300-psi rated 4 inch weld neck flange, which itself weighed already 29 pounds. The completed 1st generation Acoustic Monitoring Package weighed almost 100 pounds. This was too cumbersome to mount in the field, on an access port at a pipeline shut-off valve. Therefore a 2nd generation and truly Portable Acoustic Monitor was built. It incorporated a fully self-contained {Delta}p type signal sensor, rated for line pressures up to 1000 psi with a base weight of only 6 pounds. This is the Rosemont Inc. Model 3051CD-Range 0, software driven sensor, which is believed to have industries best total performance. Its most sensitive unit was purchased with a {Delta}p range from 0 to 3 inch water. This resulted in the herein described 2nd generation: Portable Acoustic Monitoring Package (PAMP) for pipelines up to 1000 psi. Its 32-pound total weight includes an 18-volt battery. Together with a 3 pound laptop with its 4-channel data acquisition card, completes the equipment needed for field acoustic monitoring of natural gas transmission pipelines.

  20. Voluntary Reporting of Greenhouse Gases Program - Electricity...

    Gasoline and Diesel Fuel Update (EIA)

    Jet Fuel ( Jet A, JP-8) 70.88 kg CO2 MMBtu 9.57 kg CO2 gallon Kerosene 72.31 kg CO2 MMBtu 9.76 kg CO2 gallon Heavy Fuel Oil (No. 5, 6 fuel oil), bunker fuel 78.80 kg CO2 ...

  1. Chemical Hydrogen Storage Materials

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... H 2 s, T 125-200C) * high hydrogen selectivities (S ... 3.2 kg Media H 2 Density mat ) ( m )( mat ) kg H 2 L 0.07 * HD polyethylene tank 6.2 kg ...

  2. Supercapacitor Materials and Devices: Nickel-Cobalt Supercapacitors...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The common measures of performance are the energy density (energy per kg) and power density (power per kg). This technology is based on specific metal oxide compositions ...

  3. Lightweighting and Propulsion Materials Roadmapping Workshop...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Emissions (kg CO2kg Mg) Production volume (ktonsyr) Magnesium Metrics - Production, Cost, Emissions Production volume Emissions Mg cost 2X Al Mg cost Al Mg cost steel ...

  4. untitled

    National Nuclear Security Administration (NNSA)

    DRAFT ENVIRONMENTAL ASSESSMENT FOR THE TRANSFER OF THE KANSAS CITY PLANT, KANSAS CITY, MISSOURI U.S. Department of Energy National Nuclear Security Administration February 2013 DOE/EA-1947 CONVERSION FACTORS Metric to English English to Metric Multiply by To get Multiply by To get Area Square kilometers 247.1 Acres Square kilometers 0.3861 Square miles Square meters 10.764 Square feet Concentration Kilograms/sq. meter 0.16667 Tons/acre Milligrams/liter 1 a Parts/million Micrograms/liter 1 a

  5. SAS Output

    U.S. Energy Information Administration (EIA) Indexed Site

    3. Carbon Dioxide Uncontrolled Emission Factors Fuel EIA Fuel Code Factor (Kilograms of CO2 Per Million Btu)*** Notes Bituminous Coal BIT 93.3 Distillate Fuel Oil DFO 73.16 Geothermal GEO 7.71 Jet Fuel JF 70.9 Kerosene KER 72.3 Lignite Coal LIG 97.7 Municipal Solid Waste MSW 41.69 Natural Gas NG 53.07 Petroleum Coke PC 102.1 Propane Gas PG 63.07 Residual Fuel Oil RFO 78.79 Coal-Derived Synthesis Gas SGC 53.07 Assumed to have emissions similar to Natural Gas Synthesis Gas from Petroleum Coke SGP

  6. Beyond Orbital-Motion-Limited theory effects for dust transport in tokamaks

    SciTech Connect (OSTI)

    Delzanno, Gian Luca; Tang, Xianzhu

    2015-05-29

    Dust transport in tokamaks is very important for ITER. Can many kilograms of dust really accumulate in the device? Can the dust survive? The conventional dust transport model is based on Orbital-Motion-Limited theory (OML). But OML can break in the limit where the dust grain becomes positively charged due to electron emission processes because it overestimates the dust collected power. An OML+ approximation of the emitted electrons trapped/passing boundary is shown to be in good agreement with PIC simulations.

  7. Final Report for Monitoring of Reactor Antineutrinos with Compact Germanium Detectors

    SciTech Connect (OSTI)

    Orrell, John L.; Collar, J. I.

    2009-07-01

    This 2008 NCMR project has pursued measurement of the antineutrino-nucleus coherent scattering interaction using a low-energy threshold germanium gamma-ray spectrometer of roughly one-half kilogram total mass. These efforts support development of a compact system for monitoring the antineutrino emission from nuclear reactor cores. Such a monitoring system is relevant to nuclear safeguards and nuclear non-proliferation in general by adding a strong method for assuring quantitative material balance of special nuclear material in the nuclear fuel cycle used in electricity generation.

  8. Monitoring the fate of chlorine from MSW sampling through combustion. Part II. Combustion studies

    SciTech Connect (OSTI)

    Domalski, E.S.; Churney, K.L.; Ledford, A.E. Jr.; Bruce, S.S.; Buckley, T.J.; Parris, R.M.; Chesler, S.N.

    1984-01-01

    Combustion measurements were carried out in a multi-kilogram capacity flow calorimeter on cellulose and cellulose/sand samples in 100% oxygen and several oxygen/nitrogen mixtures. Some measurements were made on cellulose/sand samples, which had 1 mass % of polyvinylchloride (PVC) as part of their composition, to study the conditions related to the formation/destruction of chlorinated organic compounds as combustion products. Qualitative identifications of a significant variety of chlorinated organic compounds have been made. 2 refs., 2 figs., 7 tabs.

  9. gtri | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    Home gtri Joint Statement by the United States and Italy on the 2014 Nuclear Security Summit See a fact sheet here. The White HouseOffice of the Press Secretary Italy and the United States of America are pleased to announce that they have jointly completed the removal of approximately 20 kilograms of excess highly enriched uranium (HEU) and separated plutonium from Italy. At the 2012... Joint Statement by President Obama and Prime Minister Elio Di Rupo of Belgium on the 2014 Nuclear Security

  10. DEVELOPMENT OF CONTINUOUS SOLVENT EXTRACTION PROCESSES FOR COAL DERIVED CARBON PRODUCTS

    SciTech Connect (OSTI)

    Elliot B. Kennel; Quentin C. Berg; Stephen P. Carpenter; Dady Dadyburjor; Jason C. Hissam; Manoj Katakdaunde; Liviu Magean; Abha Saddawi; Alfred H. Stiller; John W. Zondlo

    2006-03-07

    The purpose of this DOE-funded effort is to develop continuous processes for solvent extraction of coal for the production of carbon products. The largest applications are those which support metals smelting, such as anodes for aluminum smelting and electrodes for arc furnaces. Other carbon products include materials used in creating fuels for the Direct Carbon Fuel Cell, metals smelting, especially in the aluminum and steel industries, as well as porous carbon structural material referred to as ''carbon foam'' and carbon fibers. During this reporting period, efforts have focused on the development of carbon electrodes for Direct Carbon Fuel Cells (DCFC), and on carbon foam composites used in ballistic armor, as well as the hydrotreatment of solvents used in the basic solvent extraction process. A major goal is the production of 1500 pounds of binder pitch, corresponding to about 3000 pounds of hydrotreated solvent.

  11. Flexural support member having a high ratio of lateral-to-axial stiffness

    DOE Patents [OSTI]

    Haas, W.M.B.

    1983-06-23

    A convoluted flexible support structure is provided which is capable of supplying a lateral to axial spring rate in excess of 1000 to 1. A support member in the form of a steel disc having a specified number of rather large radius, concentric convolutions and a thickness in the range of from about 0.01 to 0.02 inch has an axial stiffness of about 50 pounds/inch while the lateral stiffness is about 100,000 pounds/inch. The support member may be used to support a vibration device where the lateral motion of the vibrator must be highly restricted while providing relatively free axial displacement of about +-0.25 inch.

  12. Flexural support member having a high ratio of lateral-to-axial stiffness

    DOE Patents [OSTI]

    Haas, Wendall M. B.

    1985-01-01

    A convoluted flexible support structure is provided which is capable of supplying a lateral to axial spring rate in excess of 1,000 to 1. A support member in the form of a steel disc having a specified number of rather large radius, concentric convolutions and a thickness in the range of from about 0.01 to 0.02 inch has an axial stiffness of about 50 pounds/inch while the lateral stiffness is about 100,000 pounds/inch. The support member may be used to support a vibration device where the lateral motion of the vibrator must be highly restricted while providing relatively free axial displacement of about .+-.0.25 inch.

  13. 2015 Uranium Marketing Annual Report

    U.S. Energy Information Administration (EIA) Indexed Site

    1 2015 Uranium Marketing Annual Report Release Date: May 24, 2016 Next Release Date: May 2017 thousand pounds U 3 O 8 equivalent 2011 2012 2013 2014 P2015 Owners and operators of U.S. civilian nuclear power reactors 89,835 97,647 113,007 114,046 120,857 U.S. brokers and traders 6,841 5,677 7,926 5,916 5,678 U.S. converter, enrichers, fabricators, and producers 15,428 17,611 13,416 12,766 9,388 Total commercial inventories 112,104 120,936 134,418 132,728 135,923 thousand pounds U 3 O 8 equivalent

  14. Market values summary/December market review/current market data

    SciTech Connect (OSTI)

    1994-01-01

    This article is the December 1993 uranium market summary. During this period, there were six deals in the restricted concentrates market and none in the unrestricted market. The restricted value dropped slightly to $9.85 per pound U3O8, while the unrestricted market rose slightly to $7.00. The UF6 market was also slow, with a slight decrease in the restricted UF6 value to $31.00 and no change in the unrestricted value ($24.00). The unrestricted transaction value was $7.15 per pound U3O8, and the restricted value was $10.25. In the enrichment services market, the unrestricted SWU value remained fixed at $68.00 per SWU, while the unrestricted value increased by a dollar to $84.00 per SWU. Active uranium supply decreased, while active demand increased.

  15. INEEL Lead Recycling in a Moratorium Environment

    SciTech Connect (OSTI)

    Kooda, K. E.; Galloway, K.; McCray, C. W.; Aitken, D. W.

    2003-02-26

    Since 1999, the Idaho National Engineering and Environmental Laboratory (INEEL) Lead Project successfully recycled over 700,000 pounds of excess INEEL lead to the private sector. On February 14, 2000, the Secretary of Energy, Bill Richardson, formalized the January 12, 2000, moratorium on recycling radioactive scrap metal that prevented the unrestricted release of recycled scrap metals to the private sector. This moratorium created significant problems for the INEEL lead recycling program and associated plans; however, through the cooperative efforts of the INEEL and Idaho State University as well as innovative planning and creative thinking the recycling issues were resolved. This collaboration has recycled over 160,000 pounds of excess lead to Idaho State University with a cost savings of over $.5M.

  16. INEEL Lead Recycling in a Moratorium Environment

    SciTech Connect (OSTI)

    Kooda, Kevin Evan; Mc Cray, Casey William; Aitken, Darren William; Galloway, Kelly

    2003-02-01

    Since 1999, the Idaho National Engineering and Environmental Laboratory (INEEL) Lead Project successfully recycled over 700,000 pounds of excess INEEL lead to the private sector. On February 14, 2000, the Secretary of Energy, Bill Richardson, formalized the January 12, 2000, moratorium on recycling radioactive scrap metal that prevented the unrestricted release of recycled scrap metals to the private sector. This moratorium created significant problems for the INEEL lead recycling program and associated plans; however, through the cooperative efforts of the INEEL and Idaho State University as well as innovative planning and creative thinking the recycling issues were resolved. This collaboration has recycled over 160,000 pounds of excess lead to Idaho State University with a cost savings of over $.5M.

  17. Method, system and computer program product for monitoring and optimizing fluid extraction from geologic strata

    DOE Patents [OSTI]

    Medizade, Masoud; Ridgely, John Robert

    2009-12-15

    An arrangement which utilizes an inexpensive flap valve/flow transducer combination and a simple local supervisory control system to monitor and/or control the operation of a positive displacement pump used to extract petroleum from geologic strata. The local supervisory control system controls the operation of an electric motor which drives a reciprocating positive displacement pump so as to maximize the volume of petroleum extracted from the well per pump stroke while minimizing electricity usage and pump-off situations. By reducing the electrical demand and pump-off (i.e., "pounding" or "fluid pound") occurrences, operating and maintenance costs should be reduced sufficiently to allow petroleum recovery from marginally productive petroleum fields. The local supervisory control system includes one or more applications to at least collect flow signal data generated during operation of the positive displacement pump. No flow, low flow and flow duration are easily evaluated using the flap valve/flow transducer arrangement.

  18. Autoclave nuclear criticality safety analysis

    SciTech Connect (OSTI)

    D`Aquila, D.M.; Tayloe, R.W. Jr.

    1991-12-31

    Steam-heated autoclaves are used in gaseous diffusion uranium enrichment plants to heat large cylinders of UF{sub 6}. Nuclear criticality safety for these autoclaves is evaluated. To enhance criticality safety, systems are incorporated into the design of autoclaves to limit the amount of water present. These safety systems also increase the likelihood that any UF{sub 6} inadvertently released from a cylinder into an autoclave is not released to the environment. Up to 140 pounds of water can be held up in large autoclaves. This mass of water is sufficient to support a nuclear criticality when optimally combined with 125 pounds of UF{sub 6} enriched to 5 percent U{sup 235}. However, water in autoclaves is widely dispersed as condensed droplets and vapor, and is extremely unlikely to form a critical configuration with released UF{sub 6}.

  19. A unique gun application for both high velocity and low velocity projectiles in a standard 155mm long tom gun

    SciTech Connect (OSTI)

    Garcia, J.R.

    1990-01-01

    The Terminal Ballistics Facility at Sandia National Laboratores in Albuquerque, New Mexico has developed an inexpensive and reliable capability for environmental testing of nuclear and kinetic energy weapon systems using the standard military 155 mm long tom gun. An unusual priming technique and charge configuration developed by Sandia National laboratories provides repeatable results such that payloads may be launched outside of the normal operating regime (both high and low) for the 155 mm gun. A 15 pound payload was reliably launched at 1000 fps with a breech pressure of 3000 psi. Another 20 pound payload was reliably launched to 5000 fps with a breech pressure of 50000 psi. A detailed description of charge configuration and test results is presented. 21 figs., 4 tabs.

  20. Uranium Marketing Annual Report -

    Gasoline and Diesel Fuel Update (EIA)

    9. Foreign purchases of uranium by U.S. suppliers and owners and operators of U.S. civilian nuclear power reactors by delivery year, 2010-14 thousand pounds U3O8 equivalent; dollars per pound U3O8 equivalent Deliveries 2010 2011 2012 2013 2014 U.S. suppliers Foreign purchases 24,985 19,318 20,196 23,233 24,199 Weighted-average price 41.30 48.80 46.80 43.25 39.13 Owners and operators of U.S. civilian nuclear power reactors Foreign purchases 30,362 35,071 36,037 34,095 34,404 Weighted-average

  1. Uranium Marketing Annual Report -

    Gasoline and Diesel Fuel Update (EIA)

    . Uranium purchased by owners and operators of U.S. civilian nuclear power reactors by origin and delivery year, 2010-14 thousand pounds U3O8 equivalent; dollars per pound U3O8 equivalent Deliveries 2010 2011 2012 2013 2014 U.S.-Origin Uranium Purchases 3,687 5,205 9,807 9,484 3,316 Weighted-Average Price 45.25 52.12 59.44 56.37 48.11 Foreign-Origin Uranium Purchases 42,895 49,626 47,713 47,919 50,033 Weighted-Average Price 49.64 55.98 54.07 51.13 46.03 Total Purchases 46,582 54,831 57,520

  2. Uranium Marketing Annual Report -

    Gasoline and Diesel Fuel Update (EIA)

    0. U.S. broker and trader purchases of uranium by origin, supplier, and delivery year, 2010-14 thousand pounds U3O8 equivalent; dollars per pound U3O8 equivalent Deliveries 2010 2011 2012 2013 2014 Received U.S.-origin uranium Purchases 2,226 1,668 1,194 W 410 Weighted-average price 43.36 54.85 51.78 W 33.55 Received foreign-origin uranium Purchases 27,186 24,695 24,606 W 28,743 Weighted-average price 41.42 49.69 47.75 W 38.42 Total received by U.S. brokers and traders Purchases 29,412 26,363

  3. Uranium Marketing Annual Report -

    Gasoline and Diesel Fuel Update (EIA)

    1. Foreign sales of uranium from U.S. suppliers and owners and operators of U.S. civilian nuclear power reactors by origin and delivery year, 2010-14 thousands pounds U3O8 equivalent; dollars per pound U3O8 equivalent Deliveries to foreign suppliers and utilities 2010 2011 2012 2013 2014 U.S.-origin uranium Foreign sales 3,440 4,387 4,798 4,148 4,210 Weighted-average price 37.82 53.08 47.53 43.10 32.91 Foreign-origin uranium Foreign sales 19,708 12,297 13,185 14,717 15,794 Weighted-Average Price

  4. Uranium Marketing Annual Report - Release Date: May 31, 2011

    Gasoline and Diesel Fuel Update (EIA)

    4. Uranium purchased by owners and operators of U.S. civilian nuclear power reactors by origin and material type, 2014 deliveries thousand pounds U3O8 equivalent; dollars per pound U3O8 equivalent Deliveries Uranium concentrate Natural UF6 Enriched UF6 Total U.S.-origin uranium Purchases 2,004 1,312 0 3,316 Weighted-average price 49.87 45.41 -- 48.11 Foreign-origin uranium Purchases 27,257 16,491 6,285 50,033 Weighted-average price 44.56 48.98 44.69 46.03 Total Purchases 29,260 17,803 6,285

  5. 2015 Domestic Uranium Production Report

    U.S. Energy Information Administration (EIA) Indexed Site

    Domestic Uranium Production Report 2015 Domestic Uranium Production Report Release Date: May 5, 2016 Next Release Date: May 2017 Activity at U.S. Mills and In-Situ-Leach Plants 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 Ore from Underground Mines and Stockpiles Fed to Mills 1 0 W W W 0 W W W W W W W 0 Other Feed Materials 2 W W W W W W W W W W W W W Total Mill Feed W W W W W W W W W W W W W (thousand pounds U 3 O 8 ) W W W W W W W W W W W W W (thousand pounds U 3 O 8 ) W W

  6. Stainless steel quadralatch finger test report

    SciTech Connect (OSTI)

    Deichelbohrer, P.R.

    1996-06-20

    The design of the quadralatch on the universal samplers was changed in response to flammable gas operating constraints. Additional redesign of the fingers was included to facilitate manufacturability. The new design was tested to assure satisfactory performance. It was shown that the fingers can hold a sampler in place with an upward force of at least 2200 N (500 pounds) and that the mechanical remote latch unit can release the quadralatch under this condition of maximum upward force.

  7. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Biodiesel Tax Exemption Biodiesel blends containing at least 20% biodiesel derived from used cooking oil are exempt from the $0.30 per gallon state fuel excise tax. The exemption does not apply to fuel used in vehicles with a gross vehicle weight rating of 26,001 pounds or more, fuel not sold in retail operations, or fuel sold in operations involving fleet fueling or bulk sales. The exemption expires after December 31, 2019. (Reference Oregon Revised Statutes 319.530

  8. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Alternative Fuel Excise Tax Compressed natural gas motor fuel is subject to the state fuel excise tax at the rate of $0.30 per 120 cubic feet, measured at 14.73 pounds per square inch and 60 degrees Fahrenheit. Propane motor fuel is subject to the excise tax $0.30 per 1.3 gallons at 60 degrees Fahrenheit. (Reference Oregon Revised Statutes 319.530

  9. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Idle Reduction Requirement A vehicle may not idle for more than five minutes from April through October in cities and counties where the local government has signed a Memorandum of Agreement with the Texas Commission on Environmental Quality (TCEQ). Exemptions apply for the following: vehicles with a gross vehicle weight rating (GVWR) of 14,000 pounds (lbs.) or less; emergency or law enforcement vehicles; airport ground support vehicles; rented/leased vehicles; to perform needed work, including

  10. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Tire Inflation Requirement The California Air Resources Board (ARB) enforces regulations to reduce greenhouse gas emissions from vehicles operating inefficiently with under inflated tires. These regulations apply to vehicles with a gross vehicle weight rating of 10,000 pounds or less. Automotive service providers performing or offering to perform automotive maintenance or repair services in the state must: Check and inflate vehicle tires to the manufacturer recommended tire pressure rating, with

  11. SAS Output

    U.S. Energy Information Administration (EIA) Indexed Site

    1. Sulfur Dioxide Uncontrolled Emission Factors Fuel, Code, Source and Emission Units Combustion System Type / Firing Configuration Fuel EIA Fuel Code Source and Tables (As Appropriate) Emissions Units Lbs = Pounds MMCF = Million Cubic Feet MG = Thousand Gallons Cyclone Firing Boiler Fluidized Bed Firing Boiler Stoker Boiler Tangential Firing Boiler All Other Boiler Types Combustion Turbine Internal Combustion Engine Distillate Fuel Oil* DFO Source: 2, Table 3.1-2a, 3.4-1 & 1.3-1 Lbs per MG

  12. SAS Output

    U.S. Energy Information Administration (EIA) Indexed Site

    2. Nitrogen Oxides Uncontrolled Emission Factors Fuel, Code, Source and Emission Units Combustion System Type / Firing Configuration Tangential Boiler All Other Boiler Types Fuel EIA Fuel Code Source and Tables (As Appropriate) Emissions Units Lbs = Pounds MMCF = Million Cubic Feet MG = Thousand Gallons Cyclone Firing Boiler Fluidized Bed Firing Boiler Stoker Boiler Dry-Bottom Boilers Wet-Bottom Boilers Dry-Bottom Boilers Wet-Bottom Boilers Combustion Turbine Internal Combustion Engine

  13. The 800-meter sample toroidal field conductor

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    800-meter sample toroidal field conductor was transferred to a container ship at the port of Charleston, S.C., on May 28, 2014 for its voyage to La Spezia, Italy. Photo: US ITER INSIDE: ITER Site Progress View from DOE US ITER Systems Update Hearing on Fusion Energy Disruption Mitigation Team Reviews Progress Engaging Industry, Universities and Labs Central Solenoid Fabrication Upcoming Events US ITER Ships Over 30,000 Pounds of Magnet System Hardware to Europe ITER is a unique international

  14. The Ames Laboratory Creating Materials and Energy Solutions

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Steve Karsjen, Director, Public Affairs 111 TASF Ames, IA 50011 karsjen@ameslab.gov 515-294-5643 THE AMES LABORATORY STORY... Then We began in 1942 as part of the Manhattan Project. The Ames Project at Iowa State College, under the leadership of materials experts Frank Spedding and Harley Wilhelm, developed a uranium-purification process so efficient and cost effective it's still in use today. The Ames Project provided two million pounds of high- purity uranium to the Manhattan Project. After

  15. Quick-setting concrete and a method for making quick-setting concrete

    DOE Patents [OSTI]

    Wagh, Arun S. (Joliet, IL); Singh, Dileep (Westmont, IL); Pullockaran, Jose D. (Trenton, NJ); Knox, Lerry (Glen Ellyn, IL)

    1997-01-01

    A method for producing quick setting concrete is provided comprising hydrng a concrete dry mixture with carbonate solution to create a slurry, and allowing the slurry to cure. The invention also provides for a quick setting concrete having a predetermined proportion of CaCO.sub.3 of between 5 and 23 weight percent of the entire concrete mixture, and whereby the concrete has a compression strength of approximately 4,000 pounds per square inch (psi) within 24 hours after pouring.

  16. The Ames Project (1942-1946)

    ScienceCinema (OSTI)

    None

    2013-06-05

    The Ames Laboratory was officially founded on May 17, 1947, following development of a process to purify uranium metal for the historic Manhattan Project. From 1942 to 1946, Ames Lab scientists produced over two-million pounds of uranium metal. A U.S. Department of Energy national research laboratory, the Ames Laboratory creates materials and energy solutions. Iowa State University operates Ames Laboratory under contract with the DOE.

  17. LANL Distinguished Postdoc Fellows

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Conducts Watusi Experiment LANL Conducts Watusi Experiment Nevada Test Site, NV The Los Alamos National Laboratory conducts Watusi, a spectacular high-explosives experiment with a yield equivalent to about 37,000 pounds of TNT, at the Nevada Test Site's Big Explosive Experimental Facility (BEEF). The experiment seeks to demonstrate that existing seismic and infrasound sensors at the test site and across the West used when DOE was conducting underground nuclear tests still can detect and

  18. Market Research Survey of Commercial Off-The-Shelf (COTS) Portable MS Systems for IAEA Safeguards Applications

    SciTech Connect (OSTI)

    Hart, Garret L.; Hager, George J.; Barinaga, Charles J.; Duckworth, Douglas C.

    2013-02-01

    This report summarizes the results for the market research survey of mass spectrometers that are deemed pertinent to International Atomic Energy Agency (IAEA) needs and strategic objectives. The focus of the report is on MS instruments that represent currently available (or soon to be) commercial off-the shelf (COTS) technology and weigh less than 400 pounds. A compilation of all available MS instruments (36 COTS and 2 R&D) is presented, along with pertinent information regarding each instrument.

  19. Development of a non-propagating explosives storage cabinet

    SciTech Connect (OSTI)

    Couch, W.A. ); Schneider, B.A. . Engineering Research Inst.)

    1991-08-01

    Sandia National Laboratories, Albuquerque (SNL) has completed the design of an Explosive Components Facility (ECF). Construction of the ECF is scheduled to begin in 1992 with completion in 1995. An integral part of the ECF will be on-site storage of explosives in six earth-covered service magazines. Each magazine will contain a non-propagating Explosives Storage Cabinet (ESC) system made up to twenty modular units. In addition to the secure storage of explosives, a primary purpose of the cabinet system is to prevent a sympathetic detonation of the explosives stored in the surrounding units as a result of an accidental detonation of up to 5.0 pounds of explosives (TNT equivalent) stored in a donor'' unit in the cabinet. Therefore, the maximum creditable event'' for each service magazine is 5.0 pounds, even though each magazine could contain up to 100 pounds of explosives stored in 5.0 pounds increments. A new material being developed at the New Mexico Engineering Research Institute (NMERI) known as SIFCON (Slurry Infiltrated Fiber CONcrete), had been shown to be highly resistant to back spall from blast loadings, and penetration by high-velocity ballistic projectiles and fragments. These, and other characteristics unique to SIFCON, such as very high strength and ductility, appeared to make it an excellent candidate material for the modular units of the ESC. In 1989 SNL contracted with NMERI to develop a SIFCON modular unit for the ESC. Based upon the success of Phase 1 program, a more extensive Phase 2 program was undertaken in 1990 and has been successfully completed. This paper is a summary of the Phase 1 and Phase 2 work, which includes the design, fabrication, and explosive testing of the modular units.

  20. Table Definitions, Sources, and Explanatory Notes

    Gasoline and Diesel Fuel Update (EIA)

    Heat Content of Natural Gas Consumed Definitions Key Terms Definition British Thermal Unit (Btu) The quantity of heat required to raise the temperature of 1 pound of liquid water by 1 degree Fahrenheit at the temperature at which water has its greatest density (approximately 39 degrees Fahrenheit). Delivered to Consumers (Heat Content) Heat content of residential, commercial, industrial, vehicle fuel and electric power deliveries to consumers. Electric Power (Heat Content) Heat content of

  1. Table Definitions, Sources, and Explanatory Notes

    Gasoline and Diesel Fuel Update (EIA)

    Supplemental Supplies Definitions Key Terms Definition Biomass Gas A medium Btu gas containing methane and carbon dioxide, resulting from the action of microorganisms on organic materials such as a landfill. Blast-furnace Gas The waste combustible gas generated in a blast furnace when iron ore is being reduced with coke to metallic iron. It is commonly used as a fuel within steel works. British Thermal Unit (Btu) The quantity of heat required to raise the temperature of 1 pound of liquid water

  2. Nevada Site Office News News Media Contact: For Immediate Release:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    July 24, 2012 morgan@nv.doe.gov NNSA Conducts Third Seismic Source Physics Experiment The National Nuclear Security Administration (NNSA) announced today that it has successfully conducted the third seismic Source Physics Experiment (SPE-3) at the Nevada National Security Site (NNSS). The seismic experiment was the third in a series of seven underground, fully-coupled, high- explosive field tests. SPE-3 included detonating a chemical explosive equivalent to 2,200 pounds of TNT in a contained,

  3. Evaluating the Role of Prophylactic Gastrostomy Tube Placement Prior to Definitive Chemoradiotherapy for Head and Neck Cancer

    SciTech Connect (OSTI)

    Chen, Allen M.; Li Baoqing; Lau, Derick H.; Farwell, D. Gregory; Luu, Quang; Stuart, Kerri; Newman, Kathleen; Purdy, James A.; Vijayakumar, Srinivasan M.D.

    2010-11-15

    Purpose: To determine the effect of prophylactic gastrostomy tube (GT) placement on acute and long-term outcome for patients treated with definitive chemoradiotherapy for locally advanced head and neck cancer. Methods and Materials: One hundred twenty consecutive patients were treated with chemoradiotherapy for Stage III/IV head and neck cancer to a median dose of 70 Gy (range, 64-74 Gy). The most common primary site was the oropharynx (66 patients). Sixty-seven patients (56%) were treated using intensity-modulated radiotherapy (IMRT). Seventy patients (58%) received prophylactic GT placement at the discretion of the physician before initiation of chemoradiotherapy. Results: Prophylactic GT placement significantly reduced weight loss during radiation therapy from 43 pounds (range, 0 to 76 pounds) to 19 pounds (range, 0 to 51 pounds), which corresponded to a net change of -14% (range, 0% to -30%) and -8% (range, +1% to -22%) from baseline, respectively (p < 0.001). However, the proportion of patients who were GT-dependent at 6- and 12-months after treatment was 41% and 21%, respectively, compared with 8% and 0%, respectively, for those with and without prophylactic GT (p < 0.001). Additionally, prophylactic GT was associated with a significantly higher incidence of late esophageal stricture compared with those who did not have prophylactic GT (30% vs. 6%, p < 0.001). Conclusions: Although prophylactic GT placement was effective at preventing acute weight loss and the need for intravenous hydration, it was also associated with significantly higher rates of late esophageal toxicity. The benefits of this strategy must be balanced with the risks.

  4. environment | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    environment Pantex makes paper into compost Every year, NNSA's Pantex Plant uses thousands of pounds of paper that must be destroyed to protect sensitive information. For the vast majority of that paper, a trip through the shredder is not the end of its purpose, but only a beginning. After spending a few weeks composting in a pile of feedlot... DOE celebrates Earth Day DOE today celebrated Earth Day with Community Day on the DOE Pavilion. More than 20 local green exhibitors, including various

  5. October 22, 2014 | Center for Gas SeparationsRelevant to Clean Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    October 2010 October 2010 October 29, 2010 In this issue: NNSA Senior Leadership Team in Place NNSA Completes Largest Fuel Return Campaign 32 Years of Reactor Conversion NNSA Committed to Energy Efficiency, Savings NNSA Nonproliferation Program Develops Cutting-edge Dental Implant Technology Pantex Authorized to Begin Work on B53 Big Month for National Ignition Facility DOE Collects 120,000 Pounds of Food for "Feds Feed Families" Campaign NNSA's Kansas City Plant Meets Major Milestone

  6. Dynamics of Molecular Clouds: Observations, Simulations, and NIF

    Office of Scientific and Technical Information (OSTI)

    Experiments (Conference) | SciTech Connect Conference: Dynamics of Molecular Clouds: Observations, Simulations, and NIF Experiments Citation Details In-Document Search Title: Dynamics of Molecular Clouds: Observations, Simulations, and NIF Experiments Authors: Kane, J O ; Martinez, D A ; Pound, M W ; Heeter, R F ; Casner, A ; Mancini, R C Publication Date: 2015-01-16 OSTI Identifier: 1179389 Report Number(s): LLNL-CONF-666498 DOE Contract Number: DE-AC52-07NA27344 Resource Type: Conference

  7. Performance characteristics of the Lysholm engine as tested for geothermal power applications

    SciTech Connect (OSTI)

    Steidel, R.F. Jr.; Pankow, D.; Berger, R.E.

    1981-08-01

    This is a description of the performance tests of the Lysholm engine which have recently been completed at the University of California, Berkeley. The Lysholm engine is a rotary displacement engine which can accept and expand a mixed-phase water-steam mixture. As a thermodynamic process, mixed-phase expansion has the potential for using significantly more of the available energy output per pound of fluid. 6 refs.

  8. Biodegradable plastics from potato waste double savings to environment

    SciTech Connect (OSTI)

    Coleman, R. )

    1990-11-01

    Plastics can be made from starchy food waste. This article describes a method by which these plastics break down into harmless chemicals when exposed to sunlight, water or bacteria. Degradable trash bags and agricultural mulch films can replace some of the millions of pounds of nondegradable plastics used each year. Researchers at Argonne National Laboratory developed that involves enzymatically converting potato waste into glucose, fermenting the glucose to lactic acid using bacteria, and then using the lactic acid to construct fully degradable plastics.

  9. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Idle Reduction Technology Weight Exemption States may allow heavy-duty vehicles equipped with idle reduction technology to exceed the maximum gross vehicle weight limit and the axle weight limit by up to 550 pounds to compensate for the additional weight of the idle reduction technology. This allowance does not impact state highway funding eligibility. (Reference Public Law 112-141 and 23 U.S. Code 127(a)(12)

  10. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Natural Gas Vehicle (NGV) Weight Exemption NGVs may exceed the federal maximum gross vehicle weight limit by an amount equal to the difference of the weight of the natural gas tank and fueling system and the weight of a comparable diesel tank and fueling system. The NGV must not exceed a maximum gross vehicle weight of 82,000 pounds. (Reference Public Law 114-94, 2015, and 23 U.S. Code 127(s)

  11. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Idle Reduction Weight Exemption A commercial vehicle equipped with qualified idle reduction technology may exceed the state's gross, total axle, or bridge formula vehicle weight limits by up to 400 pounds to compensate for the additional weight of the idle reduction technology. Upon request, vehicle operators must provide proof that the idle reduction technology is fully functional. (Reference Alaska Administrative Code 17.25.01

  12. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Alternative Fuel Tax An excise tax rate of 9% of the average wholesale price on a per gallon basis applies to all special fuels, including diesel, natural gas, liquefied petroleum gas (propane), ethanol, biodiesel, hydrogen, and any other combustible gases and liquids, excluding gasoline, used to propel motor vehicles. For taxation purposes, one gasoline gallon equivalent (GGE) of compressed natural gas (CNG) is equal to 5.66 pounds (lbs.) or 126.67 cubic feet. One GGE of liquefied natural gas

  13. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Idle Reduction Weight Exemption A commercial vehicle equipped with idle reduction technology may exceed the state's gross, total axle, total tandem, or bridge formula vehicle weight limits by up to 550 pounds to compensate for the additional weight of the idle reduction technology. The additional weight may not exceed the actual weight of the idle reduction unit. (Reference Connecticut General Statutes 14-267c

  14. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Idle Reduction Weight Exemption Any motor vehicle equipped with idle reduction technology may exceed the gross vehicle or internal bridge weight by the amount equal to the certified weight of the idle reduction technology, up to 550 pounds. To be eligible, the operator must present written verification of the weight of the idle reduction technology and demonstrate that it is fully functional at all times. (Reference Florida Statutes 316.54

  15. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Natural Gas Vehicle (NGV) and Fueling Infrastructure Grants The Texas Commission on Environmental Quality (TCEQ) administers the NGV Grant Program (Program) as part of the Texas Emissions Reduction Plan. The Program provides grants to replace existing medium- and heavy-duty vehicles with new, converted, or repowered NGVs. Qualifying vehicles must be on-road vehicles with a gross vehicle weight rating of more than 8,500 pounds and must be certified to current federal emissions standards. Grant

  16. DOE - Office of Legacy Management -- Heppanstall Co - PA 19

    Office of Legacy Management (LM)

    Heppanstall Co - PA 19 FUSRAP Considered Sites Site: Heppanstall Co. (PA.19 ) Eliminated from further consideration under FUSRAP Designated Name: Not Designated Alternate Name: Tippens Inc. PA.19-1 Location: 4620 Hatfield Street , Pittsburgh , Pennsylvania PA.19-4 Evaluation Year: 1987 PA.19-2 Site Operations: Forged approximately 100,000 pounds of uranium during a six month period in 1955. PA.19-1 Site Disposition: Eliminated - Potential for contamination remote. Radiological screening survey

  17. Summary - Major Risk Factors Integrated Facility Disposition Project (IFDP) Oak Ridge, TN

    Office of Environmental Management (EM)

    & ORNL, Oak Ridge, TN EM Project: Integrated Facility Disposition Project (IFDP) ETR Report Date: August 2008 ETR-15 United States Department of Energy Office of Environmental Management (DOE-EM) External Technical Review of the Major Risk Factors Integrated Facility Disposition Project (IFDP) Oak Ridge, TN Why DOE-EM Did This Review Approximately two million pounds of mercury are unaccounted for at Y-12 and mercury contamination has been detected in both soils and groundwater. The IFDP will

  18. LEAKAGE TESTING METHOD

    DOE Patents [OSTI]

    McAdams, Wm.A.; Foss, M.H.

    1958-08-12

    A method of testing containers for leaks is described, particularly the testing of containers or cans in which the uranium slugs for nuelear reactors are jacketed. This method involves the immersion of the can in water under l50 pounds of pressure, then removing, drying, and coating the can with anhydrous copper sulfate. Amy water absorbed by the can under pressure will exude and discolor the copper sulfate in the area about the leak.

  19. Method of servicing wellbores

    SciTech Connect (OSTI)

    Pasztor, A.J.; Stauffer, R.C.

    1981-12-08

    The servicing of wellbores with a high density fluid to maintain an elevated pressure on a portion of the formation penetrated by the well is improved. The improvement comprises injecting as the high density fluid a substantially solids-free aqueous solution of calcium bromide and zinc bromide having a density of at least about 15 pounds per gallon. The aqueous solution is prepared by reacting hydrogen bromide with zinc or compounds of zinc in the presence of an aqueous calcium bromide solution.

  20. Viscous heavy brines

    SciTech Connect (OSTI)

    House, R.F.; Hoover, L.D.

    1984-07-10

    Hydroxyethyl cellulose and a sequestrant are added to a heavy brine containing one or more salts selected from calcium chloride, calcium bromide, and zinc bromide to increase the viscosity of the brine. Preferably the brine contains zinc bromide, has a density in the range from about 14.2-19.2 pounds per gallon, and the sequestrant is a polyphosphonic acid or water soluble salt thereof.

  1. Method of servicing wellbores

    SciTech Connect (OSTI)

    Stauffer, R. C.; Pasztor, A. J.

    1984-12-25

    The servicing of wellbores with a high density fluid to maintain an elevated pressure on a portion of the formation penetrated by the well is improved. The improvement comprises injecting as the high density fluid a substantially solids-free aqueous solution of calcium bromide and zinc bromide having a density of at least about 15 pounds per gallon. The aqueous solution is prepared by reacting hydrogen bromide with zinc or compounds of zinc in the presence of an aqueous calcium bromide solution.

  2. Hanford Blog Archive - Hanford Site

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    August 2014 August 12, 2014 NEWS RELEASE: Contractor Removes More Than 650 Pounds of Contamination from Groundwater For a second year in a row, and four months ahead of schedule, CH2M HILL Plateau Remediation Company exceeded the Department of Energy's annual goal. August 11, 2014 NEWS RELEASE: Workers Creating Demolition Zone at Hanford's Plutonium Finishing Plant Over the last few weeks, the look of Hanford's main plutonium plant has changed as crews have removed or demolished eight buildings

  3. Assumptions to the Annual Energy Outlook 2015

    U.S. Energy Information Administration (EIA) Indexed Site

    72 Transportation Demand Module The NEMS Transportation Demand Module estimates transportation energy consumption across the nine Census Divisions (see Figure 5) and over ten fuel types. Each fuel type is modeled according to fuel-specific and associated technology attributes applicable by transportation mode. Total transportation energy consumption is the sum of energy use in eight transport modes: light-duty vehicles (cars and light trucks), commercial light trucks (8,501-10,000 pounds gross

  4. info disclosure-rocky mts

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    NCSL/State and Tribal Government Working Group Appendix CLOSURE FOR THE SEVENTH GENERATION A REPORT FROM THE STEWARDSHIP COMMITTEE OF THE STATE AND TRIBAL GOVERNMENT WORKING GROUP National Conference of State Legislatures William T. Pound, Executive Director 1560 Broadway, Suite 700 Denver, Colorado 80202 (303) 830-2200 444 North Capitol Street, N.W. Washington, D.C. 20001 (202) 624-5400 February 1999 Closure for the Seventh Generation 2 NCSL/State and Tribal Government Working Group This book

  5. Comprehensive report to Congress: Clean Coal Technology Program: Blast furnace granulated coal injection system demonstration project: A project proposed by: Bethlehem Steel Corporation

    SciTech Connect (OSTI)

    Not Available

    1990-10-01

    Bethlehem Steel Corporation (BSC), of Bethlehem, Pennsylvania, has requested financial assistance from DOE for the design, construction, and operation of a 2800-ton-per-day blast furnace granulated coal injection (BFGCI) system for each of two existing iron-making blast furnaces. The blast furnaces are located at BSC's facilities in Burns Harbor, Indiana. BFGCI technology involves injecting coal directly into an iron-making blast furnace and subsequently reduces the need for coke on approximately a pound of coke for pound of coal basis. BFGCI also increases blast furnace production. Coke will be replaced with direct coal injection at a rate of up to 400 pounds per NTHM. The reducing environment of the blast furnace enables all of the sulfur in the coal to be captured by the slag and hot metal. The gases exiting the blast furnace are cleaned by cyclones and then wet scrubbing to remove particulates. The cleaned blast furnace gas is then used as a fuel in plant processes. There is no measurable sulfur in the off gas. The primary environmental benefits derived from blast furnace coal injection result from the reduction of coke requirements for iron making. Reduced coke production will result in reduced releases of environmental contaminants from coking operations. 5 figs.

  6. Potential value of Cs-137 capsules

    SciTech Connect (OSTI)

    Bloomster, C.H.; Brown, D.R.; Bruno, G.A.; Hazelton, R.F.; Hendrickson, P.L.; Lezberg, A.J.; Tingey, G.L.; Wilfert, G.L.

    1985-04-01

    We determined the value of Cs-137 compared to Co-60 as a source for the irradiation of fruit (apples and cherries), pork and medical supplies. Cs-137, in the WESF capsule form, had a value of approximately $0.40/Ci as a substitute for Co-60 priced at approximately $1.00/Ci. The comparison was based on the available curies emitted from the surface of each capsule. We developed preliminary designs for fourteen irradiation facilities; seven were based on Co-60 and seven were based on Cs-137. These designs provided the basis for estimating capital and operating costs which, in turn, provided the basis for determining the value of Cs-137 relative to Co-60 in these applications. We evaluated the effect of the size of the irradiation facility on the value of Cs-137. The cost of irradiation is low compared to the value of the product. Irradiation of apples for disinfestation costs $.01 to .02 per pound. Irradiation for trichina-safe pork costs $.02 per pound. Irradiation of medical supplies for sterilization costs $.07 to .12 per pound. The cost of the irradiation source, either Co-60 or Cs-137, contributed only a minor amount to the total cost of irradiation, about 5% for the fruit and hog cases and about 20% for the medical supply cases. We analyzed the sensitivity of the irradiation costs and Cs-137 value to several key assumptions.

  7. Ozone transport commission developments

    SciTech Connect (OSTI)

    Joyce, K.M.

    1995-08-01

    On September 27, 1994, the states of the Ozone Transport Commission (OTC) signed an important memorandum of understanding (MOU) agreeing to develop a regional strategy for controlling stationary sources of nitrogen oxide emissions. Specifically, the states of the Ozone Transport Region, OTR, agreed to propose regulations for the control of NOx emissions from boilers and other indirect heat exchangers with a maximum gross heat input rate of at least 250 million BTU per hour. The Ozone Transport Region was divided into Inner, Outer and Northern Zones. States in the Outer Zone agreed to reduce NOx emissions by 55%. States in the Inner Zone agreed to reduce NOx emissions 65%. Facilities in both zones have the option to emit NOx at a rate no greater than 0.2 pounds per million Btu by May 1, 1999. This option provides fairness for the gas-fired plants which already have relatively low NOx emissions. Additionally, States in the Inner and Outer Zones agreed to reduce their NOx emissions by 75% or to emit NOx at a rate no greater than 0.15 pounds per million BTU by May 1, 2003. The Northern Zone States agree to reduce their rate of NOx emissions by 55% from base year levels by May 1, 2003, or to emit NOx at a rate no greater than 0.2 pounds per million BTU. As part of this MOU, States also agreed to develop a regionwide trading mechanism to provide a cost-effective mechanism for implementing the reductions.

  8. A PACIFIC-WIDE GEOTHERMAL RESEARCH LABORATORY: THE PUNA GEOTHERMAL RESEARCH FACILITY

    SciTech Connect (OSTI)

    Takahashi, P.; Seki, A.; Chen, B.

    1985-01-22

    The Hawaii Geothermal Project (HGP-A) well, located in the Kilauea volcano east rift zone, was drilled to a depth of 6450 feet in 1976. It is considered to be one of the hot-test producing geothermal wells in the world. This single well provides 52,800 pounds per hour of 371 F and 160 pounds per square inch-absolute (psia) steam to a 3-megawatt power plant, while the separated brine is discharged in percolating ponds. About 50,000 pounds per hour of 368 F and 155 psia brine is discharged. Geothermal energy development has increased steadily in Hawaii since the completion of HGP-A in 1976: (1) a 3 megawatt power plant at HGP-A was completed and has been operating since 1981; (2) Hawaiian Electric Company (HECO) has requested that their next increment in power production be from geothermal steam; (3) three development consortia are actively, or in the process of, drilling geothermal exploration wells on the Big Island; and (4) engineering work on the development of a 400 megawatt undersea cable for energy transmission is continuing, with exploratory discussions being initiated on other alternatives such as hydrogen. The purpose for establishing the Puna Geothermal Research Facility (PGRF) is multifold. PGRF provides a facility in Puna for high technology research, development, and demonstration in geothermal and related activities; initiate an industrial park development; and examine multi-purpose dehydration and biomass applications related to geothermal energy utilization.

  9. Transportation of foreign-owned enriched uranium from the Republic of Georgia. Environmental assessment for Project Partnership

    SciTech Connect (OSTI)

    1998-03-31

    The Department of Energy (DOE) Office of Nonproliferation and National Security (NN) has prepared a classified environmental assessment to evaluate the potential environmental impact for the transportation of 5.26 kilograms of enriched uranium-235 in the form of nuclear fuel, from the Republic of Georgia to the United Kingdom. The nuclear fuel consists of primarily fresh fuel, but also consists of a small quantity (less than 1 kilogram) of partially-spent fuel. Transportation of the enriched uranium fuel would occur via US Air Force military aircraft under the control of the Defense Department European Command (EUCOM). Actions taken in a sovereign nation (such as the Republic of Georgia and the United Kingdom) are not subject to analysis in the environmental assessment. However, because the action would involve the global commons of the Black Sea and the North Sea, the potential impact to the global commons has been analyzed. Because of the similarities in the two actions, the Project Sapphire Environmental Assessment was used as a basis for assessing the potential impacts of Project Partnership. However, because Project Partnership involves a small quantity of partially-spent fuel, additional analysis was conducted to assess the potential environmental impacts and to consider reasonable alternatives as required by NEPA. The Project Partnership Environmental Assessment found the potential environmental impacts to be well below those from Project Sapphire.

  10. Operation of a bushing melter system designed for actinide vitrification

    SciTech Connect (OSTI)

    Ramsey, W.G.

    1996-03-01

    The Westinghouse Savannah River Company is developing a melter system to vitrify actinide materials. The melter system will used to vitrify the americium and curium solution which is currently stored in one of the Savannah River Site`s (SRS) processing canyons. This solution is one of the materials designated by the Defense Nuclear Facilities Safety Board (DNFSB) to be dispositioned as part of the DNFSB recommendation 94-1. The Am/Cm solution contains an extremely large fraction (>2 kilograms of Cm and 10 kilograms of Am) of t he United States`s total inventory of both elements. They have an estimated value on the order of one billion dollars - if they are processed through the DOE Isotope Sales program at the Oak Ridge National Laboratory. It is therefore deemed highly desirable to transfer the material to Oak Ridge in a form which can allow for recovery of the material. A commercial glass composition has been demonstrated to be compatible with up to 40 weight percent of the Am/Cm solution contents. This glass is also selectively attacked by nitric acid. This allows the actinide to be recovered by common separation processes.

  11. Gas turbine fuel from low-rank coal

    SciTech Connect (OSTI)

    Maas, D.J.; Smith, F.J.

    1986-06-01

    Five low-rank coals from the western United States were cleaned in a bench-scale heavy media separation procedures followed by acid leaching and hydrothermal processing. The objective of these cleaning steps was to determine the amenability of preparing gas turbine quality fuel from low-rank coal. The best candidate for scale-up was determined to be a Wyoming subbituminous coal from the eagle Butte mine. Two hundred thirty kilograms of cleaned and micronized coal/water fuel were prepared in pilot-scale equipment to determine process parameters and fuel characteristics. After establishing operating conditions, two thousand kilograms of cleaned and micronized coal/water and powdered coal fuel were produced for testing in a pilot-scale gas turbine combustor. An economic analysis was completed for a commercial-scale plant designed to produce clean gas turbine fuel from low-rank coal using the most promising process steps identified form the bench- and pilot-scale studies. 21 refs., 12 figs., 20 tabs.

  12. Characterization of 618-11 solid waste burial ground, disposed waste, and description of the waste generating facilities

    SciTech Connect (OSTI)

    Hladek, K.L.

    1997-10-07

    The 618-11 (Wye or 318-11) burial ground received transuranic (TRTJ) and mixed fission solid waste from March 9, 1962, through October 2, 1962. It was then closed for 11 months so additional burial facilities could be added. The burial ground was reopened on September 16, 1963, and continued operating until it was closed permanently on December 31, 1967. The burial ground received wastes from all of the 300 Area radioactive material handling facilities. The purpose of this document is to characterize the 618-11 solid waste burial ground by describing the site, burial practices, the disposed wastes, and the waste generating facilities. This document provides information showing that kilogram quantities of plutonium were disposed to the drum storage units and caissons, making them transuranic (TRU). Also, kilogram quantities of plutonium and other TRU wastes were disposed to the three trenches, which were previously thought to contain non-TRU wastes. The site burial facilities (trenches, caissons, and drum storage units) should be classified as TRU and the site plutonium inventory maintained at five kilograms. Other fissile wastes were also disposed to the site. Additionally, thousands of curies of mixed fission products were also disposed to the trenches, caissons, and drum storage units. Most of the fission products have decayed over several half-lives, and are at more tolerable levels. Of greater concern, because of their release potential, are TRU radionuclides, Pu-238, Pu-240, and Np-237. TRU radionuclides also included slightly enriched 0.95 and 1.25% U-231 from N-Reactor fuel, which add to the fissile content. The 618-11 burial ground is located approximately 100 meters due west of Washington Nuclear Plant No. 2. The burial ground consists of three trenches, approximately 900 feet long, 25 feet deep, and 50 feet wide, running east-west. The trenches constitute 75% of the site area. There are 50 drum storage units (five 55-gallon steel drums welded together) buried in three rows in the northeast comer. In addition, five eight-foot diameter caissons are located at the west end of the center row of the drum storage units. Initially, wastes disposed to the caissons and drum storage units were from the 325 and 327 building hot cells. Later, a small amount of remote-handled (RH) waste from the 309 building Plutonium Recycle Test Reactor (PRTR) cells, and the newly built 324 building hot cells, was disposed at the site.

  13. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    and Hydrogen Tax Compressed natural gas (CNG) and hydrogen are taxed at a rate of $0.105 per gasoline gallon equivalent (GGE) until June 30, 2016; this rate will increase by $0.02 per year until July 2018. Liquefied natural gas (LNG) is taxed at a rate of $0.105 per diesel gallon equivalent (DGE) until June 30, 2016; this rate will increase by $0.02 per year until July 2018. One GGE is equal to 5.660 pounds (lbs.) of CNG or 2.198 lbs. of hydrogen. One DGE is equal to 6.06 lbs. of LNG. (Reference

  14. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Natural Gas Tax Compressed natural gas (CNG) and liquefied natural gas (LNG) dispensed into a motor vehicle is taxed at a rate of $0.15 per gasoline gallon equivalent (GGE) or diesel gallon equivalent (DGE), depending on how the dispenser lists the price. A GGE is defined as 5.66 pounds (lbs.) of CNG or 5.37 lbs. of LNG. A DGE is defined as 6.380 lbs. of CNG or 6.06 lbs. of LNG. Exemptions may apply. (Reference Texas Statutes, Tax Code 162.001, and 162.351 through 162.356

  15. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Natural Gas and Propane Vehicle License Fee Drivers using natural gas or propane to fuel a vehicle may pay an annual special use fuel license fee in lieu of the state fuel excise tax of $0.30 per gallon. The fee is determined by multiplying a base amount in the table below by the current tax rate and dividing by 12. Combined Vehicle Weight (pounds) Base Amount 0 - 10,000 $60 10,001 - 26,000 $300 26,001 and above $400 (Reference Oregon Revised Statutes 319.530

  16. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Alternative Fuel Tax The excise tax imposed on compressed natural gas (CNG), liquefied natural gas (LNG), and liquefied petroleum gas (LPG or propane) used to operate a vehicle can be paid through an annual flat rate sticker tax based on the following vehicle weights: Unladen Weight Fee All passenger cars and other vehicles 4,000 pounds (lbs.) or less $36 More than 4,000 lbs. but less than 8,001 lbs. $72 More than 8,000 lbs. but less than 12,001 lbs. $120 12,001 lbs. or more $168 Alternatively,

  17. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Heavy-Duty Truck Idle Reduction Requirements A driver of a diesel-fueled vehicle with a gross vehicle weight rating of more than 10,000 pounds may not idle the vehicle's primary engine for more than five consecutive minutes at any location, and is not allowed to operate a diesel-fueled auxiliary power system (APS) on the vehicle for more than five minutes when located within 100 feet of a restricted area. Exceptions apply in certain situations and for certain vehicles. Any internal combustion

  18. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Electric Vehicle (EV) Access to Roadways A low-speed EV, also known as a neighborhood electric vehicle, is defined as a motor vehicle with four wheels, a gross vehicle weight rating of 3,000 pounds or less, and capable of achieving a minimum speed of 20 miles per hour (mph) and a maximum speed of 25 mph. Low-speed EVs are subject to all provisions applicable to a motor vehicle and must meet federal safety standards established in Title 49 of the Code of Federal Regulations, section 571.500.

  19. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Definition A PEV is defined as a vehicle that: Draws electricity from a battery with a capacity of at least four kilowatt-hours and is capable of being charged from an external source; Has not been modified from the original equipment manufacturer power train specifications; Has a gross vehicle weight rating of 8,500 pounds or less; Has a maximum speed of at least 65 miles per hour; and Meets applicable requirements in Title 49 of the U.S. Code of Federal Regulations, section 571. (Reference

  20. Buildings Energy Data Book: 1.4 Environmental Data

    Buildings Energy Data Book [EERE]

    4 2003 Construction and Demolition Debris Generated from Construction Activities | Residential Commercial Buildings | Residential Commercial Buildings Construction 10.0 5.0 15.0 | 6% 3% 9% Demolition 38.0 33.0 71.0 | 22% 19% 42% Renovation 19.0 65.0 84.0 | 11% 38% 49% Total 67.0 103.0 170.0 | 39% 61% 100% Note(s): Source(s): Debris (million tons) Debris (percent of total buildings sector) 170 million tons of construction and demolition debris represents approximately 3.2 pounds of debris per

  1. Buildings Energy Data Book: 2.4 Residential Environmental Data

    Buildings Energy Data Book [EERE]

    2 2005 End-Use Carbon Dioxide Emissions Splits for an Average Household, by Region (Pounds of CO2) Northeast Midwest South West National Space Heating Space Cooling Water Heating Refrigerator Other Appliances & Lighting Total Source(s): EIA, A Look at Residential Energy Consumption in 2005, Jul. 2008, Tables CE(2-5)-(9-12)c; EIA, Assumptions to the AEO 2011, July 2011, Table 2, p. 12 for coefficients; EIA, AEO 2012 Early Release, Jan. 2012, Tables 2 and 18. 8,673 10,421 10,722 9,219 9,945

  2. Buildings Energy Data Book: 5.1 Building Materials/Insulation

    Buildings Energy Data Book [EERE]

    1 U.S. Insulation Demand, by Type (Million Pounds) (1) Insulation Type 1992 2001 2006 (1) Fiberglass 2,938 55% 3,760 54% 4,085 53% Foamed Plastic 1,223 23% 1,775 25% 1,955 26% Cellulose 485 9% 665 9% 730 10% Mineral Wool 402 8% 445 6% 480 6% Other 309 6% 370 5% 395 5% Total 5,357 100% 7,015 100% 7,645 100% Note(s): 1) Projected. Source(s): National Insulation Association, www.insulation.org, Aug. 2006.

  3. NREL: Technology Deployment - FEMA Engages NREL in Hurricane Sandy Recovery

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Effort FEMA Engages NREL in Hurricane Sandy Recovery Effort May 8, 2013 Natural Disasters, By the Numbers There have been 144 weather/climate disasters since 1980 in which overall damages reached or exceeded $1 billion. In 2005, the estimated economic loss due to Hurricane Katrina was about $187 billion. In 2012, the estimated total loss due to Hurricane Sandy was $71 billion in New York and New Jersey alone. By the time Hurricane Sandy pounded the East Coast on October 29, 2012, it had

  4. Turner-Fairbank Scour Experiments

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Turn Your Halloween Pumpkins Into Power Turn Your Halloween Pumpkins Into Power October 27, 2015 - 9:37am Addthis Graphic by <a href="/node/379579">Sarah Gerrity</a>, Energy Department. Graphic by Sarah Gerrity, Energy Department. Liz Lowry Senior Research Analyst, Bioenergy Technologies Office Alicia Moulton Communications Specialist, Bioenergy Technologies Office What are the key facts? 1.3 billion pounds of pumpkins are produced in the United States each year, many of

  5. Uranium Processing Facility Team Signs Partnering Agreement | Y-12 National

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    a. Uranium purchased by owners and operators of U.S. civilian nuclear power reactors, 1994-2014 million pounds U3O8 equivalent Delivery year Total purchased Purchased from U.S. producers Purchased from U.S. brokers and traders Purchased from other owners and operators of U.S. civilian nuclear power reactors, other U.S. suppliers, (and U.S. government for 2007)1 Purchased from foreign suppliers U.S.-origin uranium Foreign-origin uranium Spot contracts2 Short, medium, and long-term contracts3 1994

  6. Spray dryer capacity stretched 50%

    SciTech Connect (OSTI)

    Paraskevas, J.

    1983-01-01

    This article describes plant equipment modifications which has resulted in a 50% increase in spray drying capacity. The installation of a new atomizer and screening system in NL Chemicals' Newberry Springs plant which produces natural clays for use as rheological additives in industrial coatings, cosmetics and other products, resulted in a 50% increase in spray drying capacity. Energy consumption per pound of product was reduced by 7%, and product quality improved. This was achieved in less than three months at an investment of less than 10% of what an additional spray dryer would have cost.

  7. Table 3. U.S. Inputs to biodiesel production

    U.S. Energy Information Administration (EIA) Indexed Site

    U.S. Inputs to biodiesel production" "million pounds" ,"Feedstock inputs" ,"Vegetable oils",,,,,,,,,,,,"Animal fats" "Period","Canola oil",,"Corn oil",,"Cottonseed oil",,"Palm oil",,"Soybean oil",,"Other",,"Poultry",,"Tallow" 2014 "January",35.75,,72.72,,"W",,"W",,273,,"W",,2,,15

  8. American Recovery & Reinvestment Act Newsletter - Issue 14

    Office of Environmental Management (EM)

    WEST VALLEY, N.Y. - The West Valley Demonstration Project (WVDP) in New York has a power ful ally in its American Recover y and Reinvestment work to prepare one of its facilities for decon- tamination. It's known as the robotic arm, and has a set of jaws, a 600-pound grip force, reciprocating saw, impact wrench, and hydraulic shears capable of cutting pipes up to 3 feet. The robotic arm begins work this sum- mer to dismantle and remove more than one mile of process piping and nine vessels from

  9. Highly conductive electrolyte composites containing glass and ceramic, and method of manufacture

    DOE Patents [OSTI]

    Hash, M.C.; Bloom, I.D.

    1992-10-13

    An electrolyte composite is manufactured by pressurizing a mixture of sodium ion conductive glass and an ionically conductive compound at between 12,000 and 24,000 pounds per square inch to produce a pellet. The resulting pellet is then sintered at relatively lower temperatures (800--1200 C), for example 1000 C, than are typically required (1400 C) when fabricating single constituent ceramic electrolytes. The resultant composite is 100 percent conductive at 250 C with conductivity values of 2.5 to 4[times]10[sup [minus]2](ohm-cm)[sup [minus]1]. The matrix exhibits chemical stability against sodium for 100 hours at 250 to 300 C. 1 figure.

  10. Weekly AMO Announcements 1/13/16 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Weekly AMO Announcements 1/13/16 Weekly AMO Announcements 1/13/16 January 13, 2016 - 2:00pm Addthis Join Secretary Moniz for a Twitter Town Hall - TODAY AT 2pm EST Secretary Moniz will join the White House for Big Block of Cheese Day, a day-long Twitter town hall event inspired by President Andrew Jackson's 1837 open house featuring a 1,400-pound block of cheese. The Energy Secretary will join other Administration officials to answer your climate and energy questions at 2 p.m. ET on January 13.

  11. Feds feed Families | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Feds feed Families Feds feed Families September 3, 2014 - 12:27pm Addthis Feds feed Families Feds feed Families September 2, 2014 Feds feed Families Representatives of the Office of Enterprise Assessments delivered more than 1,600 pounds of non-perishable food to the Manna Food Center on September 2, 2014 as part of the 2014 Feds Feed Families campaign. Manna feeds about 3,300 needy families in Montgomery County. Manna also provides food to 48 Montgomery County soup kitchens, food pantries,

  12. Investigation of the March 5, 2011, Building 488, Brookhaven National Laboratory, Tree Felling Injury

    Broader source: Energy.gov [DOE]

    On Saturday, March 5, 2011 at approximately 10:20 a.m., a Brookhaven National Laboratory Building and Grounds Utility Worker was felling a pine tree while elevated in a 60-foot articulating and telescoping boom lift approximately 20-feet above the ground on the south side of Building 488. As the gas-powered, 20-inch chainsaw being used by the employee cut through the tree trunk, an approximately 8-foot long, 18-inch diameter, 520 pound section of tree trunk fell toward the aerial lift, striking the employee’s right forearm, and compressing it against the top railing of the aerial lift basket.

  13. Welcome

    Energy Savers [EERE]

    Weekly AMO Announcements 1/13/16 Weekly AMO Announcements 1/13/16 January 13, 2016 - 2:00pm Addthis Join Secretary Moniz for a Twitter Town Hall - TODAY AT 2pm EST Secretary Moniz will join the White House for Big Block of Cheese Day, a day-long Twitter town hall event inspired by President Andrew Jackson's 1837 open house featuring a 1,400-pound block of cheese. The Energy Secretary will join other Administration officials to answer your climate and energy questions at 2 p.m. ET on January 13.

  14. Electro-osmotic transport in wet processing of textiles

    DOE Patents [OSTI]

    Cooper, John F.

    1998-01-01

    Electro-osmotic (or electrokinetic) transport is used to efficiently force a solution (or water) through the interior of the fibers or yarns of textile materials for wet processing of textiles. The textile material is passed between electrodes that apply an electric field across the fabric. Used alone or in parallel with conventional hydraulic washing (forced convection), electro-osmotic transport greatly reduces the amount of water used in wet processing. The amount of water required to achieve a fixed level of rinsing of tint can be reduced, for example, to 1-5 lbs water per pound of fabric from an industry benchmark of 20 lbs water/lb fabric.

  15. Electro-osmotic transport in wet processing of textiles

    DOE Patents [OSTI]

    Cooper, J.F.

    1998-09-22

    Electro-osmotic (or electrokinetic) transport is used to efficiently force a solution (or water) through the interior of the fibers or yarns of textile materials for wet processing of textiles. The textile material is passed between electrodes that apply an electric field across the fabric. Used alone or in parallel with conventional hydraulic washing (forced convection), electro-osmotic transport greatly reduces the amount of water used in wet processing. The amount of water required to achieve a fixed level of rinsing of tint can be reduced, for example, to 1--5 lbs water per pound of fabric from an industry benchmark of 20 lbs water/lb fabric. 5 figs.

  16. Combined Heat and Power System Achieves Millions in Cost Savings at Large

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    University - Case Study, 2013 | Department of Energy Achieves Millions in Cost Savings at Large University - Case Study, 2013 Combined Heat and Power System Achieves Millions in Cost Savings at Large University - Case Study, 2013 Texas A&M University (Texas A&M), in collaboration with Harvey Cleary Builders and Jacobs Engineering Group, installed a 45 MW high-efficiency, natural gas-fired CHP system consisting of a 34 MW combustion turbine, a 210,000-pound-per-hour (pph) heat

  17. Nov05_Tymes.indd

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 W H AT ' S I N S I D E Y-12 breaks ground 3 Are your benefi ts paying off? 4 20 ways to save money with YES 6 Protect yourself 7 Are your shoes safe? 8 After three years of planning and six years of execution, BWXT Y-12 celebrated the successful transfer of more than 45 metric tons (or approximately 100,000 pounds) of highly enriched uranium from Y-12 to the United States Enrichment Corporation. BWXT's Nuclear Products Division in Lynchburg, Va., blended the material with natural uranium to

  18. Progress in Recycling Elemental Lead for Reuse of Radiologically-Contaminated within the Nuclear Industry

    SciTech Connect (OSTI)

    Reno, C.

    2003-02-26

    Duratek successfully demonstrated a process for reusing contaminated lead as a shielding material for radioactive waste containers. This process offers the Department of Energy (DOE) and commercial utilities a cost-effective strategy for reusing a material that would otherwise require costly disposal as a mixed waste. During the past year, GTS-Duratek Inc. approximately 500,000 pounds of contaminated and potentially contaminated lead into shielding (bricks) and shielded steel containers. The lead originated from the DOE facilities including INEEL, Hanford, Argonne, Los Alamos, Berkeley and Sandia.

  19. Nuclear Storage Overpack Door Actuator and Alignment Apparatus

    DOE Patents [OSTI]

    Andreyko, Gregory M.

    2005-05-11

    The invention is a door actuator and alignment apparatus for opening and closing the 15,000-pound horizontally sliding door of a storage overpack. The door actuator includes a ball screw mounted horizontally on a rigid frame including a pair of door panel support rails. An electrically powered ball nut moves along the ball screw. The ball nut rotating device is attached to a carriage. The carriage attachment to the sliding door is horizontally pivoting. Additional alignment features include precision cam followers attached to the rails and rail guides attached to the carriage.

  20. Joint DOE-CH2M HILL News Release For Immediate Release:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    For Immediate Release: Media Contact: August 12, 2014 Destry Henderson, CH2M HILL, (509) 376-8644, destry_j_henderson@rl.gov Geoff Tyree, DOE, (509) 308-4287, geoffrey.tyree@rl.doe.gov Contractor removes more than 650 pounds of contamination from Hanford groundwater Energy Department annual goal met 4 months ahead of schedule Note: Photos are available on the Hanford Site website: http://go.usa.gov/PARP RICHLAND, Wash. - For a second year in a row and four months ahead of schedule, the U.S.

  1. 12 Days of Energy Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Days of Energy Savings 12 Days of Energy Savings December 24, 2012 - 9:30am Addthis Day 12: Drive Your Way to Fuel Savings 1 of 12 Day 12: Drive Your Way to Fuel Savings Save money on fuel costs by emptying your car after all your shopping trips -- an extra 100 pounds in your vehicle could increase gas costs by up to $.08 a gallon. Image: Sarah Gerrity, Energy Department Day 11: Plug Holiday Decorations into Power Strips 2 of 12 Day 11: Plug Holiday Decorations into Power Strips Stop phantom

  2. L:LCB:lg

    Office of Legacy Management (LM)

    L:LCB:lg '. ,. ), .; ..:.;; ~ .,. Fhazmon sAmi.now uatsri.als co. 7356 sanca !.tonioa Boulevard Eollymod 46, Calif. Attr Mr. J. 2. Alburger CslItlI%LOIll - Ootober, 9, l&2 ,:;.. ~. Tk have your letter dabed Ootobor~B, 1962 &ah is euffioient to give w a better plotwe of the we wblch you propose to make ofuraniumoorrpovndE inluud.now'paintpignonts. We are attaahing licanse number C-2663 uhi&.permits you to purchase three pounds ofuraniumoompounda for demlop3mt mrk. 1% want ybu to

  3. TO

    Office of Legacy Management (LM)

    J. fhith, Chief, TO : Hew Pork Operations Branoh, D*TE: July 10, 1951 ! I FROM : 'Russell H. BdcL, Chief, Research Service Branch, Berkeley &~'?A - wp+=q - 'I s , This Br'ea desires 500 pounds of U03 for research work on the TTA /: axtraotion process where the subjeot materisl will be spiked with Pu to make a synthetio solution for pilot plant runs. , It is desired that the material be obtained from the Msllinckrodt Chemical Works.similar to that prooured for this Area in 1950 on SR-1649

  4. Workshop ideas

    Gasoline and Diesel Fuel Update (EIA)

    Uranium Overview Production and Trade, 1949-2011 Production and Trade, 2011 Inventories, End of Year 1981-2011 Average Prices, 1981-2011 274 U.S. Energy Information Administration / Annual Energy Review 2011 Purchased Imports Purchased Imports Domestic Purchases 1 Prices are not adjusted for inflation. See "Nominal Dollars" in Glossary. Note: See "Uranium Oxide" in Glossary. Source: Table 9.3. 1950 1960 1970 1980 1990 2000 2010 0 25 50 75 Million Pounds Uranium Oxide Export

  5. Resolving to Make Earth Day Last All Year | Department of Energy

    Energy Savers [EERE]

    Resolving to Make Earth Day Last All Year Resolving to Make Earth Day Last All Year March 21, 2011 - 1:31pm Addthis Amy Foster Parish What was your New Year's resolution this year? Maybe you resolved to get back into the gym and finally lose those last pesky pounds. Maybe, like me, you resolved to finally break down and buy that new furnace. Or maybe you liked Chris' idea, and you resolved do whatever you could to save energy and money this year. When we talk about saving energy throughout the

  6. PHOTO BY JAMES CHRZANOWSKI

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PHOTO BY JAMES CHRZANOWSKI After a three-year, $94 million overhaul, the Princeton Plasma Physics Laboratory's primary fusion reactor has resumed the quest for clean energy. The fusion of parts of the atom inside the reactor could release a near limitless amount of energy and reduce our dependence on fossil fuels, while generating minimal hazardous waste. The upgrade included replacing the center of the apple-shaped reactor with a new 29,000-pound magnetic core (left) and bringing in a 70-ton

  7. More Recycling Means Less Waste for Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Recycling Means Less Waste for Complex What do batteries, lead bricks, and mineral oil have in common? They are all on the list of recently recycled materials at the Nevada National Security Site (NNSS). The goal of these recycling efforts is to minimize waste volumes at the site and encourage the repurposing of materials across the U.S. Department of Energy (DOE) Complex. In September 2011, a total of 33,000 pounds of lead was shipped from the NNSS to the recycling company, Toxco Inc. A portion

  8. Nuclear storage overpack door actuator and alignment apparatus

    DOE Patents [OSTI]

    Andreyko, Gregory M. (North Huntingdon, PA)

    2005-05-10

    The invention is a door actuator and alignment apparatus for opening and closing the 15,000-pound horizontally sliding door of a storage overpack. The door actuator includes a ball screw mounted horizontally on a rigid frame including a pair of door panel support rails. An electrically powered ball nut moves along the ball screw. The ball nut rotating device is attached to a carriage. The carriage attachment to the sliding door is horizontally pivoting. Additional alignment features include precision cam followers attached to the rails and rail guides attached to the carriage.

  9. Sellafield's Role in the Socio-Economic Development of West Cumbria - 12459

    SciTech Connect (OSTI)

    Irving, Iain

    2012-07-01

    It would be hard to imagine what West Cumbria, a remote area in the North West of England, would look like without the huge Sellafield nuclear complex. The site is owned by the Nuclear Decommissioning Authority (NDA) and managed by Nuclear Management Partners (NMP), an international private partnership consisting of URS from the United States of America, AMEC from the UK and AREVA from France. Today some 10,000 people work at Sellafield with many more employed through the site's supply chain, a large percentage of which is located directly in West Cumbria. The Government, through the NDA, has committed around pounds 1.5 billion a year for the next three years as we at NMP bring our vast global expertise and experience to deliver substantial improvements to the clean-up mission there. Of this total budget, more than Pounds 800 million a year is spent in that supply chain and around 30 percent of that goes directly to firms in West Cumbria. But the dependency on the nuclear industry is immense and, with the site now entering an extensive decommissioning programme, the threats to jobs, and therefore the local economy, is severe. While Sellafield provides wealth, there are areas of deep deprivation and worklessness. Consequently, Sellafield Ltd, NMP and NDA have partnered with the local community leaders and politicians to form Britain's Energy Coast, a strategic regeneration body driving economic improvements and projects to deliver a vibrant economy for West Cumbria, long into the future. While the threats to our economy are real, the opportunities are potentially transformational. The UK is on the brink of a nuclear renaissance and, if we are successful through the Energy Coast programme, West Cumbria will become the hub, not only of the nuclear industry, but also of green energy production in the UK, with obvious benefits to our local economy. But to achieve this, Sellafield and its new owners are having to change the opportunistic ways of the past to provide a new strategic mode of socio-economic contribution to deliver a sustainable future for the local community. The results so far have been impressive, with over pounds 56 m being committed to socio-economic projects, but the long term aim is to achieve pounds 116 m investment through public/ private partnership. Sellafield is fundamental to this goal. (authors)

  10. Pumpkin Power: Turning Food Waste into Energy | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Pumpkin Power: Turning Food Waste into Energy Pumpkin Power: Turning Food Waste into Energy November 1, 2013 - 1:28pm Addthis Pumpkin Power: Turning Food Waste into Energy Matthew Loveless Matthew Loveless Data Integration Specialist, Office of Public Affairs What are the key facts? 1.4 billion pounds of pumpkins are produced in the U.S. each year, many of which end up in landfills or compost piles after Halloween. Oakland's EBMUD collects food waste and uses microbes to convert it into methane

  11. Quick-setting concrete and a method for making quick-setting concrete

    DOE Patents [OSTI]

    Wagh, A.S.; Singh, D.; Pullockaran, J.D.; Knox, L.

    1997-04-29

    A method for producing quick setting concrete is provided comprising mixing a concrete dry mixture with carbonate solution to create a slurry, and allowing the slurry to cure. The invention also provides for a quick setting concrete having a predetermined proportion of CaCO{sub 3} of between 5 and 23 weight percent of the entire concrete mixture, and whereby the concrete has a compression strength of approximately 4,000 pounds per square inch (psi) within 24 hours after pouring. 2 figs.

  12. Dye laser amplifier including a dye cell contained within a support vessel

    DOE Patents [OSTI]

    Davin, James

    1992-01-01

    A large (high flow rate) dye laser amplifier in which a continous replenished supply of dye is excited by a first light beam, specifically a copper vapor laser beam, in order to amplify the intensity of a second different light beam, specifically a dye beam, passing through the dye is disclosed herein. This amplifier includes a dye cell defining a dye chamber through which a continuous stream of dye is caused to pass at a flow rate of greater than 30 gallons/minute at a static pressure greater than 150 pounds/square inch and a specifically designed support vessel for containing the dye cell.

  13. Dye laser amplifier including a dye cell contained within a support vessel

    DOE Patents [OSTI]

    Davin, J.

    1992-12-01

    A large (high flow rate) dye laser amplifier in which a continuous replenished supply of dye is excited by a first light beam, specifically a copper vapor laser beam, in order to amplify the intensity of a second different light beam, specifically a dye beam, passing through the dye is disclosed herein. This amplifier includes a dye cell defining a dye chamber through which a continuous stream of dye is caused to pass at a flow rate of greater than 30 gallons/minute at a static pressure greater than 150 pounds/square inch and a specifically designed support vessel for containing the dye cell. 6 figs.

  14. Method of producing a high pressure gas

    DOE Patents [OSTI]

    Bingham, Dennis N.; Klingler, Kerry M.; Zollinger, William T.

    2006-07-18

    A method of producing a high pressure gas is disclosed and which includes providing a container; supplying the container with a liquid such as water; increasing the pressure of the liquid within the container; supplying a reactant composition such as a chemical hydride to the liquid under pressure in the container and which chemically reacts with the liquid to produce a resulting high pressure gas such as hydrogen at a pressure of greater than about 100 pounds per square inch of pressure; and drawing the resulting high pressure gas from the container.

  15. Uranyl-Peroxide Nanocapsules in Aqueous Solution: Force Field Development

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Uranium Marketing Annual Report With Data for 2014 | Release Date: May 13, 2015 | Next Release Date: May 2016 | full report Previous reports Year: 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 Go Uranium purchases and prices Owners and operators of U.S. civilian nuclear power reactors ("civilian owner/operators" or "COOs") purchased a total of 53 million pounds U3O8e (equivalent1) of deliveries from U.S.

  16. 2010sr26.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Thursday, September 2, 2010 james-r.giusti@srs.gov SRS Federal Employees Give to Area Food Bank Aiken, SC -- Representatives of the U.S. Department of Energy's Savannah River Operations Office (DOE-SR) at the Savannah River Site delivered the sixth and final truckload of food and non perishables to the Golden Harvest Food Bank today. The 335 federal employees at SRS donated 66,292 pounds of goods in just over 30 days to feed the needy in Georgia and South Carolina. If one does the math, the

  17. 2010sr30_Stacks_.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Saturday, October 23, 2010 james-r.giusti@srs.gov Paivi Nettamo, SRNS, (803) 292-2484 paivi.nettamo@srs.gov Recovery Act to Fell Two Cold War Era Reactor Stacks Aiken, S.C. - Today, the Department of Energy's Savannah River Site (SRS) removed two exhaust stacks from the Site's P & R reactors. With less than 40 pounds of dynamite and in a matter of seconds, the two 145-foot tall, 700-ton stacks that have towered over the P and R Reactors for more than 50 years came down. The demolition is

  18. Punam Thakur*, Russell Hardy*, Roger Nelson** and Abraham Van Luik**

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Pumpkin Power: Turning Food Waste into Energy Pumpkin Power: Turning Food Waste into Energy November 1, 2013 - 1:28pm Addthis Pumpkin Power: Turning Food Waste into Energy Matthew Loveless Matthew Loveless Data Integration Specialist, Office of Public Affairs What are the key facts? 1.4 billion pounds of pumpkins are produced in the U.S. each year, many of which end up in landfills or compost piles after Halloween. Oakland's EBMUD collects food waste and uses microbes to convert it into methane

  19. Mercury cleanup efforts intensify | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Mercury cleanup efforts ... Mercury cleanup efforts intensify Posted: February 11, 2013 - 3:31pm | Y-12 Report | Volume 9, Issue 2 | 2013 Millions of pounds of mercury were required to support Y-12's post-World War II mission of separating lithium isotopes. Cleaning up the toxic heavy metal poses many challenges, but what Y-12 is learning could help conquer mercury pollution worldwide. There's a reason you won't find mercury in many thermometers these days. Mercury is a heavy metal that occurs

  20. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Alternative Fuel Excise Tax Liquefied petroleum gas (propane) and compressed natural gas are subject to a federal excise tax of $0.183 per gasoline gallon equivalent (GGE). The liquefied natural gas tax rate is $0.243 per diesel gallon equivalent (DGE). For taxation purposes, one GGE is equal to 5.75 pounds (lbs.) of propane and 5.66 lbs. of CNG. One DGE is equal to 6.06 lbs. of LNG. (Reference Public Law 114-41 and 26 U.S. Code 4041 and 4081) Point of Contact Excise Tax Branch U.S. Internal

  1. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Qualified Plug-In Electric Drive Motor Vehicle Tax Credit A tax credit is available for the purchase of a new qualified plug-in electric drive motor vehicle that draws propulsion using a traction battery that has at least five kilowatt-hours (kWh) of capacity, uses an external source of energy to recharge the battery, has a gross vehicle weight rating of up to 14,000 pounds, and meets specified emission standards. The minimum credit amount is $2,500, and the credit may be up to $7,500, based on

  2. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Tax Compressed natural gas used as a special motor fuel is subject to the state fuel excise tax of $0.31 per gasoline gallon equivalent, measured at 5.66 pounds (lbs.) or 126.67 cubic feet at a base temperature of 60 degrees Fahrenheit and a pressure of 14.73 lbs. per square inch. Liquefied natural gas is subject to the excise tax of $0.325 per diesel gallon equivalent, measured at 6.06 lbs. Liquefied petroleum gas (propane) is subject to the excise tax of $0.30 per gallon. E85 is subject to the

  3. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Alternative Fuels Tax The state motor fuel tax on liquefied natural gas (LNG) is imposed based on the diesel gallon equivalent (DGE) and the tax on compressed natural gas (CNG) is based on the gasoline gallon equivalent (GGE). Beginning January 1, 2016, the state motor fuel tax on propane is imposed based on a GGE basis. For taxation purposes, one GGE of propane and CNG is equal to 5.75 pounds (lbs.) and 5.66 lbs., respectively, and one DGE of LNG is equal to 6.06 lbs. The North Carolina

  4. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Alternative Fuel Tax Rate A license tax of $0.24 per gasoline gallon equivalent (GGE) or diesel gallon equivalent (DGE) is collected on all alternative fuel used, sold, or distributed for sale or use in Wyoming. Alternative fuels include compressed natural gas (CNG), liquefied natural gas (LNG), liquefied petroleum gas (propane), electricity, and renewable diesel. For taxation purposes, one GGE of CNG is equal to 5.66 pounds (lbs.), one DGE of LNG is equal to 6.06 lbs., one GGE of propane is

  5. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Dealer and Commercial User License Beginning January 1, 2017, alternative fuel dealers and alternative fuel commercial users must apply for a license from the Michigan Department of Treasury. Commercial users are defined as those operating vehicles with three or more axles, or two axles and a gross vehicle weight rating exceeding 26,000 pounds, that operate in more than one state. Alternative fuel dealers must pay a license fee of $500 and commercial users must pay a license fee of $50. For the

  6. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Plug-In Electric Vehicle (PEV) Registration Fees Beginning January 2017, PEVs, are subject to an increased vehicle registration fee. These fees apply to all-electric vehicles (EVs) as well as plug-in hybrid electric vehicles (PHEVs) with a minimum battery capacity of 4 kilowatt-hours. The specific fee increases are as follows: Vehicle Type Gross Vehicle Weight Rating Fee Increase PHEV 8,000 pounds (lbs.) or less $30 PHEV > 8,000 lbs. $100 EV 8,000 lbs. or less $100 EV > 8,000 lbs. $200

  7. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Fuels Tax Alternative fuels subject to the New Mexico excise tax include liquefied petroleum gas (propane), compressed natural gas (CNG), and liquefied natural gas (LNG). The excise tax imposed on propane is $0.12 per gallon, and the excise tax imposed on CNG and LNG is $0.133 and $0.206 per gallon, respectively. A gallon is measured as 3.785 liters of propane, 5.66 pounds (lbs.) of CNG, and 6.06 lbs. of LNG. Alternative fuel purchased for distribution is not subject to the excise tax at the

  8. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Tax Special fuels, including biodiesel, biodiesel blends, biomass-based diesel, biomass-based diesel blends, and liquefied natural gas (LNG), have a reduced tax rate of $0.27 per gallon. Liquefied petroleum gas (LPG or propane) and compressed natural gas (CNG) used to operate a motor vehicle is taxed at a rate of $0.064 and $0.21 per gallon, respectively. For taxation purposes, 126.67 cubic feet of CNG, 36.3 cubic feet (4.2 pounds (lbs.)) of propane, or 6.06 lbs. of LNG is considered equal to

  9. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Excise Taxes All licensed on-road vehicles fueled with compressed natural gas (CNG) or liquefied petroleum gas (propane) are subject to a special fuels tax through the Excise Taxes Division of the Louisiana Department of Revenue (LDR). Vehicle owners or operators must pay either an annual flat rate decal fee in the amount of $120 per vehicle with a gross vehicle weight rating (GVWR) of less than 10,000 pounds (lbs.) or a variable rate of 80% of the current special fuels tax rate. The owners or

  10. Running Line-Haul Trucks on Ethanol

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    I magine driving a 55,000-pound tractor- trailer that runs on corn! If you find it difficult to imagine, you can ask the truck drivers for Archer Daniels Midland (ADM) what it's like. For the past 4 years, they have been piloting four trucks powered by ethyl alcohol, or "ethanol," derived from corn. Several advantages to operating trucks on ethanol rather than on conventional petro- leum diesel fuel present themselves. Because ethanol can be produced domestically, unlike most of our

  11. Part 1: Participatory Ergonomics Approach to Waste Container Handling Utilizing a Multidisciplinary Team

    SciTech Connect (OSTI)

    Zalk, D.M.; Tittiranonda, P.; Burastero, S.; Biggs, T.W.; Perry, C.M.; Tageson, R.; Barsnick, L.

    2000-02-07

    This multidisciplinary team approach to waste container handling, developed within the Grassroots Ergonomics process, presents participatory ergonomic interpretations of quantitative and qualitative aspects of this process resulting in a peer developed training. The lower back, shoulders, and wrists were identified as frequently injured areas, so these working postures were a primary focus for the creation of the workers' training. Handling procedures were analyzed by the team to identify common cycles involving one 5 gallon (60 pounds), two 5 gallons (60 and 54 pounds), 30 gallon (216 pounds), and 55 gallon (482 pounds) containers: lowering from transporting to/from transport vehicles, loading/unloading on transport vehicles, and loading onto pallet. Eleven experienced waste container handlers participated in this field analysis. Ergonomic exposure assessment tools measuring these field activities included posture analysis, posture targeting, Lumbar Motion Monitor{trademark} (LMM), and surface electromyography (sEMG) for the erector spinae, infraspinatus, and upper trapezius muscles. Posture analysis indicates that waste container handlers maintained non-neutral lower back postures (flexion, lateral bending, and rotation) for a mean of 51.7% of the time across all activities. The right wrist was in non-neutral postures (radial, ulnar, extension, and flexion) a mean of 30.5% of the time and the left wrist 31.4%. Non-neutral shoulder postures (elevation) were the least common, occurring 17.6% and 14.0% of the time in the right and left shoulders respectively. For training applications, each cycle had its own synchronized posture analysis and posture target diagram. Visual interpretations relating to the peak force modifications of the posture target diagrams proved to be invaluable for the workers' understanding of LMM and sEMG results (refer to Part II). Results were reviewed by the team's field technicians and their interpretations were developed into ergonomic training that address the issues originally raised. This training includes intervention methods, ergonomic tools used, dam acquired, and effects of waste container handling techniques on lower back, shoulder, and wrists and methods to help proactively reduce injuries associated with this profession.

  12. Fuel Economy of the Light-Duty Vehicle Fleet (released in AEO2005)

    Reports and Publications (EIA)

    2005-01-01

    The U.S. fleet of light-duty vehicles consists of cars and light trucks, including minivans, sport utility vehicles (SUVs) and trucks with gross vehicle weight less than 8,500 pounds. The fuel economy of light-duty vehicles is regulated by the (Corporate Average Fuel Economy) CAFE standards set by the National Highway Traffic Safety Administration. Currently, the CAFE standard is 27.5 miles per gallon (mpg) for cars and 20.7 mpg for light trucks. The most recent increase in the CAFE standard for cars was in 1990, and the most recent increase in the CAFE standard for light trucks was in 1996.

  13. Summary - Mitigation and Remediation of Mercury Contamination at the Y-12 Plant, Oak Ridge, TN

    Office of Environmental Management (EM)

    Oak Ridge, TN EM Project: Mitigation/Remediation of Hg ETR Report Date: April 2008 ETR-13 United States Department of Energy Office of Environmental Management (DOE-EM) External Technical Review of the Mitigation and Remediation of Mercury Contamination at the Y-12 Plant, Oak Ridge, TN Why DOE-EM Did This Review From 1953 to 1983, ~240,000 pounds of mercury (Hg) were released to the East Fork Popular Creek during the operation of the Y-12 Plant. In 1963, direct systematic releases of mercury

  14. Solar Project to Spark Students' Studies, School's Savings | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Project to Spark Students' Studies, School's Savings Solar Project to Spark Students' Studies, School's Savings April 14, 2010 - 3:26pm Addthis Joshua DeLung What does this project do? Even this small group of initial panels is expected to reduce carbon emissions by 39,631 pounds annually and cut the school's energy costs by a few percentage points. A solar installation on the roof of Drury High School in North Adams, Mass., and an integrated curriculum for students will be the

  15. Atmospheric nitrogen deposition loadings to the Chesapeake Bay: An initial analysis of the cost effectiveness of control options

    SciTech Connect (OSTI)

    1996-12-31

    The purpose of this project was to examine whether programs to control regional airborne oxides of nitrogen (NOx) are cost-effective ways to reduce nitrogen loads to the Bay compared with other management scenarios. Regional control programs considered in this analysis include: the Low Emission Vehicle (LEV) program of the Ozone Transport Commission (OTC), and a 0.15 pounds (lbs) per million British thermal unit (MMBtu) NOx emission limit applied to large fuel combustors in the Northeast Ozone Transport Region (OTC) States. The effect of extending the OTR programs to wider areas of the country - whose emissions also influence the Bay - was also examined.

  16. Experimental Hall A | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A Jefferson Lab has four experimental halls. Hall A is the largest of these four experimental staging areas. It is 174 feet across and 80 feet tall from the floor to the highest spot on its domed ceiling. The foundation for the hall is 35 feet below ground. Hall A is outfitted with two primary detector systems - both high-resolution spectrometers, each weighing about 3 million pounds or 1,500 short tons. The hall is used primarily for experiments that study the structure of the nucleus and the

  17. Growing Giant Crystals

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Growing Giant Crystals A new process similar to making rock candy was developed at NIF to rapidly grow very large crystals that are about 2 cubic feet in size and weigh up to 800 pounds-about the weight of a large grizzly bear! The crystals are made of potassium dihydrogen phosphate (or KDP), a naturally occurring chemical. In crystal form, KDP has good optical properties. Crystal plates have special optical properties, like prisms, that transmit, bend, and break light up into the spectrum of

  18. Uranium Marketing Annual Report

    Gasoline and Diesel Fuel Update (EIA)

    a. Foreign purchases, foreign sales, and uranium inventories owned by U.S. suppliers and owners and operators of U.S. civilian nuclear power reactors, 1994-2014 million pounds U3O8 equivalent Delivery year Foreign purchases by U.S. suppliers Foreign purchases by owners and operators of U.S. civilian nuclear power reactors Total foreign purchases U.S. broker and trader purchases from foreign suppliers Foreign sales U.S. supplier owned uranium inventories Owners and operators of U.S. civilian

  19. Uranium Marketing Annual Report

    Gasoline and Diesel Fuel Update (EIA)

    b. Weighted-average price of foreign purchases and foreign sales by U.S. suppliers and owners and operators of U.S. civilian nuclear power reactors, 1994-2014 dollars per pound U3O8 equivalent Delivery year Foreign purchases by U.S. suppliers Foreign purchases by owners and operators of U.S. civilian nuclear power reactors Total foreign purchases (weighted-average price) U.S. broker and trader purchases from foreign suppliers (weighted-average price) Foreign sales (weighted-average price) 1994

  20. Uranium Marketing Annual Report -

    Gasoline and Diesel Fuel Update (EIA)

    0. Contracted purchases of uranium from suppliers by owners and operators of U.S. civilian nuclear power reactors, in effect at the end of 2014, by delivery year, 2015-24 thousand pounds U3O8 equivalent Contracted purchases from U.S. suppliers Contracted purchases from foreign suppliers Contracted purchases from all suppliers Year of delivery Minimum Maximum Minimum Maximum Minimum Maximum 2015 8,405 8,843 31,468 34,156 39,873 42,999 2016 7,344 7,757 29,660 31,787 37,004 39,544 2017 5,980 6,561

  1. Uranium Marketing Annual Report -

    Gasoline and Diesel Fuel Update (EIA)

    4. Deliveries of uranium feed for enrichment by owners and operators of U.S. civilian nuclear power reactors by origin country and delivery year, 2012-14 thousand pounds U3O8 equivalent Deliveries in 2012 Deliveries in 2013 Deliveries in 2014 Origin country of feed U.S. enrichment Foreign enrichment Total U.S. enrichment Foreign enrichment Total U.S. enrichment Foreign enrichment Total Australia 3,195 3,352 6,547 2,417 2,476 4,893 910 4,467 5,377 Brazil 0 0 0 0 W W 0 W W Canada 6,741 5,007

  2. Uranium Marketing Annual Report -

    Gasoline and Diesel Fuel Update (EIA)

    9. Contracted purchases of uranium by owners and operators of U.S. civilian nuclear power reactors, signed in 2014, by delivery year, 2015-24 thousand pounds U3O8 equivalent Year of Delivery Minimum Maximum 2015 2,838 2,838 2016 3,573 3,573 2017 2,718 2,818 2018 W 2,628 2019 W W 2020 W W 2021 W W 2022 W W 2023 W W 2024 W W Total 13,991 15,591 W = Data withheld to avoid disclosure of individual company data. Note: Totals may not equal sum of components because of independent rounding

  3. H. R. 1272: A Bill to amend the Internal Revenue Code of 1954 to provide a refundable income tax credit for the recycling of hazardous wastes, introduced in the House of Representatives, One Hundred Second Congress, First Session, March 5, 1991

    SciTech Connect (OSTI)

    Not Available

    1991-01-01

    This bill was introduced into the US House of Representatives on March 7, 1991 to amend the Internal Revenue Code of 1954 to provide a refundable income tax credit for the recycling of hazardous wastes. A credit of 2 cents is allowed for each pound of qualified hazardous waste recycled during the taxable year. To qualify as hazardous the waste must be listed by the EPA under section 3001 of the Solid Waste Act and is a waste product generated by the taxpayer in a trade or business.

  4. EIECYNC PRODUCYS INC. I

    Office of Legacy Management (LM)

    EIECYNC PRODUCYS INC. .-- I j..%+g3& *.' .-._'- Atomic Energy Divisis, A.rA.od n $2i?is$h BAYSIDE, NEW YORK September b, 1952 Xanagcr of Operations U. S. Atomic Energy Commission New York Operations Office P. 0. Box 30 Ansonia Station New York 23, bJew York Attention: Dr. V. L. Parsegian fi F1O,+tBlitD x' ( LAW- Gentlemen: This is to confirm my telephone conversation of September 4th with Ziss Speck of your office in reference to the folloting request: Fifty (50) pounds of Thorium Chips- We

  5. The Impact of Soil Sampling Errors on Variable Rate Fertilization

    SciTech Connect (OSTI)

    R. L. Hoskinson; R C. Rope; L G. Blackwood; R D. Lee; R K. Fink

    2004-07-01

    Variable rate fertilization of an agricultural field is done taking into account spatial variability in the soils characteristics. Most often, spatial variability in the soils fertility is the primary characteristic used to determine the differences in fertilizers applied from one point to the next. For several years the Idaho National Engineering and Environmental Laboratory (INEEL) has been developing a Decision Support System for Agriculture (DSS4Ag) to determine the economically optimum recipe of various fertilizers to apply at each site in a field, based on existing soil fertility at the site, predicted yield of the crop that would result (and a predicted harvest-time market price), and the current costs and compositions of the fertilizers to be applied. Typically, soil is sampled at selected points within a field, the soil samples are analyzed in a lab, and the lab-measured soil fertility of the point samples is used for spatial interpolation, in some statistical manner, to determine the soil fertility at all other points in the field. Then a decision tool determines the fertilizers to apply at each point. Our research was conducted to measure the impact on the variable rate fertilization recipe caused by variability in the measurement of the soils fertility at the sampling points. The variability could be laboratory analytical errors or errors from variation in the sample collection method. The results show that for many of the fertility parameters, laboratory measurement error variance exceeds the estimated variability of the fertility measure across grid locations. These errors resulted in DSS4Ag fertilizer recipe recommended application rates that differed by up to 138 pounds of urea per acre, with half the field differing by more than 57 pounds of urea per acre. For potash the difference in application rate was up to 895 pounds per acre and over half the field differed by more than 242 pounds of potash per acre. Urea and potash differences accounted for almost 87% of the cost difference. The sum of these differences could result in a $34 per acre cost difference for the fertilization. Because of these differences, better analysis or better sampling methods may need to be done, or more samples collected, to ensure that the soil measurements are truly representative of the fields spatial variability.

  6. High-density fluid compositions

    SciTech Connect (OSTI)

    Sanders, D.C.

    1981-09-29

    Clear, high-density fluids suitable for use as well completion, packing, and perforation media comprise aqueous solutions of zinc bromide and calcium bromide having densities lying in the range of about 14.5 up to about 18.0 pounds per gallon and measured PH's lying in the range of about 3.5 up to about 6.0. Optionally, such fluids may also comprise calcium chloride and/or a soluble film-forming amine-based corrosion inhibitor. Such fluids under conditions of ordinary use exhibit low corrosion rates and have crystallization points lying well below the range of temperatures under which they are used.

  7. Well completion and servicing fluid

    SciTech Connect (OSTI)

    Grimsley, R.L.

    1990-09-25

    This patent describes a well completion servicing fluid for controlling formation pressure during completion or servicing of a well. It comprises: an aqueous solution of calcium chloride, a solid weighing agent suspended in the solution and being selected from the group consisting of zinc, zinc oxide, and mixtures thereof; and a viscosifier dissolved in the solution in an amount effective to suspend the weighing agent. The fluid has a density of greater than 15 pounds per gallon and being substantially free of bromide ions and being substantially free of solid material which is not soluble in hydrochloric acid.

  8. Annual Energy Outlook 2015 - Appendix A

    Gasoline and Diesel Fuel Update (EIA)

    6 Reference case Table A7. Transportation sector key indicators and delivered energy consumption Energy Information Administration / Annual Energy Outlook 2015 Table A7. Transportation sector key indicators and delivered energy consumption Key indicators and consumption Reference case Annual growth 2013-2040 (percent) 2012 2013 2020 2025 2030 2035 2040 Key indicators Travel indicators (billion vehicle miles traveled) Light-duty vehicles less than 8,501 pounds .... 2,578 2,644 2,917 3,090 3,287

  9. Domestic Uranium Production Report

    Gasoline and Diesel Fuel Update (EIA)

    5. U.S. uranium in-situ-leach plants by owner, location, capacity, and operating status at end of the year, 2011-15 In-Situ-Leach plant owner In-Situ-Leach plant name County, state (existing and planned locations) Production capacity (pounds U3O8 per year) Operating status at end of the year 2011 2012 2013 2014 2015 AUC LLC Reno Creek Campbell, Wyoming 2,000,000 - - Developing Developing Partially Permitted and Licensed Azarga Uranium Corp Dewey Burdock Project Fall River and Custer, South

  10. Domestic Uranium Production Report - Quarterly

    Gasoline and Diesel Fuel Update (EIA)

    4. U.S. uranium in-situ-leach plants by owner, location, capacity, and operating status Operating status at the end of In-situ-leach plant owner In-situ-leach plant name County, state (existing and planned locations) Production capacity (pounds U3O8 per year) 2015 1st quarter 2016 AUC LLC Reno Creek Campbell, Wyoming 2,000,000 Partially Permitted And Licensed Partially Permitted And Licensed Azarga Uranium Corp. Dewey Burdock Project Fall River and Custer, South Dakota 1,000,000 Partially

  11. Fighting fire with fire | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Fighting fire with fire Fighting fire with fire Posted: July 30, 2015 - 3:46pm Y-12 fire fighter Capt. John Fife drags a 165-pound dummy for 100 feet to simulate a fire victim rescue as part of Fit for Duty training. As surprising as this fact may be, heart attack and stroke cause more than half of all line-of-duty firefighter deaths. To counter this trend, fire departments nationally - including Pantex and Y-12 fire departments - have adopted occupational fitness programs. The percentage of

  12. Hanford Blog Archive - Hanford Site

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    May 2013 May 30, 2013 PHOTOS: U.S. Senator Patty Murray Visits Hanford Facility Senator Patty Murray visited the Hanford Site on May 30, 2013. One of the stops on her tour was the 200 West Pump and Treat System. May 13, 2013 Press Release: Workers Exceed Goal for Removing Groundwater Contamination Contractor CH2M HILL Platea Remediation Company has removed more than 500 pounds of hexavalent chromium from groundwater along the Columbia River six months ahead of schedule. May 09, 2013 PHOTOS:

  13. 1st Quarter 2016 Domestic Uranium Production Report

    U.S. Energy Information Administration (EIA) Indexed Site

    4. U.S. uranium in-situ-leach plants by owner, location, capacity, and operating status" "In-situ-leach plant owner","In-situ-leach plant name","County, state (existing and planned locations)","Production capacity (pounds U3O8 per year)","Operating status at end of" ,,,,2015,"1st quarter 2016" "AUC LLC","Reno Creek","Campbell, Wyoming",2000000,"Partially Permitted And

  14. 2014 Domestic Uranium Production Report

    U.S. Energy Information Administration (EIA) Indexed Site

    5. U.S. uranium in-situ-leach plants by owner, location, capacity, and operating status at end of the year, 2011-15" "In-Situ-Leach Plant Owner","In-Situ-Leach Plant Name","County, State (existing and planned locations)","Production Capacity (pounds U3O8 per year)","Operating Status at End of the Year" ,,,,2011,2012,2013,2014,2015 "AUC LLC","Reno Creek","Campbell,

  15. 2015 Domestic Uranium Production Report

    U.S. Energy Information Administration (EIA) Indexed Site

    2. U.S. uranium mine production and number of mines and sources, 2003-15" "Production / Mining Method",2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014,2015 "Underground" "(estimated contained thousand pounds U3O8)","W","W","W","W","W","W","W","W","W","W","W","W","W" "Open Pit" "(estimated contained thousand

  16. 2015 Domestic Uranium Production Report

    U.S. Energy Information Administration (EIA) Indexed Site

    3. U.S. uranium concentrate production, shipments, and sales, 2003-15" "Activity at U.S. Mills and In-Situ-Leach Plants",2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014,2015 "Estimated contained U3O8 (thousand pounds)" "Ore from Underground Mines and Stockpiles Fed to Mills 1",0,"W","W","W",0,"W","W","W","W","W","W","W",0 "Other Feed Materials

  17. Addition of Safe Havens Increases WIPP Underground Safety

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    WIPP UPDATE: November 24, 2015 Addition of Safe Havens Increases WIPP Underground Safety The WIPP site has made significant safety improvements. Recently, eight underground safe havens (or refuge chambers) were delivered to the site and will be downloaded into the WIPP underground prior to the restart of waste disposal operations. The safe havens are about 28 feet long, 8 feet wide and 7.25 feet high and weigh approximately 19,000 pounds. Each unit is equipped to house 20 people for at least 36

  18. Cavity-locked ring down spectroscopy

    DOE Patents [OSTI]

    Zare, Richard N.; Paldus, Barbara A.; Harb, Charles C.; Spence, Thomas

    2000-01-01

    Distinct locking and sampling light beams are used in a cavity ring-down spectroscopy (CRDS) system to perform multiple ring-down measurements while the laser and ring-down cavity are continuously locked. The sampling and locking light beams have different frequencies, to ensure that the sampling and locking light are decoupled within the cavity. Preferably, the ring-down cavity is ring-shaped, the sampling light is s-polarized, and the locking light is p-polarized. Transmitted sampling light is used for ring-down measurements, while reflected locking light is used for locking in a Pound-Drever scheme.

  19. High pressure HC1 conversion of cellulose to glucose

    SciTech Connect (OSTI)

    Antonoplis, Robert Alexander; Blanch, Harvey W.; Wilke, Charles R.

    1981-08-01

    The production of ethanol from glucose by means of fermentation represents a potential long-range alternative to oil for use as a transportation fuel. Today's rising oil prices and the dwindling world supply of oil have made other fuels, such as ethanol, attractive alternatives. It has been shown that automobiles can operate, with minor alterations, on a 10% ethanol-gasoline mixture popularly known as gasohol. Wood has long been known as a potential source of glucose. Glucose may be obtained from wood following acid hydrolysis. In this research, it was found that saturating wood particles with HCl gas under pressure was an effective pretreatment before subjecting the wood to dilute acid hydrolysis. The pretreatment is necessary because of the tight lattice structure of cellulose, which inhibits dilute acid hydrolysis. HCl gas makes the cellulose more susceptible to hydrolysis and the glucose yield is doubled when dilute acid hydrolysis is preceded by HCl saturation at high pressure. The saturation was most effectively performed in a fluidized bed reactor, with pure HCl gas fluidizing equal volumes of ground wood and inert particles. The fluidized bed effectively dissipated the large amount of heat released upon HCl absorption into the wood. Batch reaction times of one hour at 314.7 p.s.i.a. gave glucose yields of 80% and xylose yields of 95% after dilute acid hydrolysis. A non-catalytic gas-solid reaction model, with gas diffusing through the solid limiting the reaction rate, was found to describe the HCl-wood reaction in the fluidized bed. HCl was found to form a stable adduct with the lignin residue in the wood, in a ratio of 3.33 moles per mole of lignin monomer. This resulted in a loss of 0.1453 lb. of HCl per pound of wood. The adduct was broken upon the addition of water. A process design and economic evaluation for a plant to produce 214 tons per day of glucose from air-dried ground Populus tristi gave an estimated glucose cost of 15.14 cents per pound. This would correspond to $2.54 per gallon of ethanol if the glucose were fermented. Key factors contributing to the cost of glucose production were unrecovered HCl, which contributed 5.70 cents per pound of glucose, and the cost of wood, which at $25 per ton contribute 4.17 cents per pound.

  20. Aug 2010 Times

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8 August 2010 www.y12.doe.gov/news/times.php P.O. Box 2009 Oak Ridge, TN 37831-8245 W H A T ' S I N S I D E Page 2 ARRA work continues Page 4 Sharing secrets with the public Page 5 Apprentices are a sure bet Page 6 Need a yo-yo? Stop by JA BizTown's Y-12 booth Page 8 Employees drop the pounds B&W Technical Services Y-12, LLC, a partnership between Babcock & Wilcox Technical Services Group Inc. and Bechtel National Inc., operates the Y-12 National Security Complex. A newsletter for

  1. Hour-by-Hour Cost Modeling of Optimized Central Wind-Based Water...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... costs of 2.76kg to 4.79kg 5. The combined effects of the production tax credit (PTC), Investment Tax Credit (ITC), and Treasury Grant reduce wind electricity prices 0.02kWh. ...

  2. Slide 1

    Broader source: Energy.gov (indexed) [DOE]

    is part of decision on breeders *Sea water has huge amount though very dilute. *Japan leading and cost now is estimated at 900kg *At 250kg electricity costs go up by...

  3. UQM Patents Non-Rare Earth Magnet Motor under DOE-Supported Project...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    While most plug-in electric vehicles (PEVs) use motors with rare earth metals, these materials are expensive, their prices have been highly volatile (from 80kg to 750kg), and ...

  4. In situ remediation of plutonium from glovebox exhaust ducts at the Department of Energy`s Rocky Flats Plant

    SciTech Connect (OSTI)

    Dugdale, J.S.; Humiston, T.J.; Omer, G.E.

    1993-10-01

    Plutonium and other miscellaneous hold-up materials have been accumulating in the glovebox exhaust ducts at the Rocky Flats Plant over the 40 years of weapons production at the site. The Duct Remediation Project was undertaken to assess the safety impacts of this material, and to remove it from the ductwork. The project necessitated the development of specialized tools, equipment and methods to remediate the material from continuously operating ventilation systems. Special engineered access locations were also required to provide access to the ductwork, and to ensure that safety and system operability were not degraded as a result of the remediation efforts. Operations personnel underwent significant training and development, and became an important asset to the success of the project. In total, the project succeeded in removing over 40 kilograms of plutonium-bearing material from one of the major weapons production buildings at the plant.

  5. Real-World Hydrogen Technology Validation: Preprint

    SciTech Connect (OSTI)

    Sprik, S.; Kurtz, J.; Wipke, K.; Ramsden, T.; Ainscough, C.; Eudy, L.; Saur, G.

    2012-03-01

    The Department of Energy, the Department of Defense's Defense Logistics Agency, and the Department of Transportation's Federal Transit Administration have funded learning demonstrations and early market deployments to provide insight into applications of hydrogen technologies on the road, in the warehouse, and as stationary power. NREL's analyses validate the technology in real-world applications, reveal the status of the technology, and facilitate the development of hydrogen and fuel cell technologies, manufacturing, and operations. This paper presents the maintenance, safety, and operation data of fuel cells in multiple applications with the reported incidents, near misses, and frequencies. NREL has analyzed records of more than 225,000 kilograms of hydrogen that have been dispensed through more than 108,000 hydrogen fills with an excellent safety record.

  6. Pyro-processing progress at Idaho national laboratory

    SciTech Connect (OSTI)

    Benedict, R.W.; Solbrig, C.; Westphal, B.; Johnson, T.A.; Li, S.X.; Marsden, K.; Goff, K.M.

    2007-07-01

    At the end of May 2007, 830 and 2600 kilograms of EBR-II driver and blanket metal fuel have been treated by a pyro-process since spent fuel operations began in June 1996. A new metal waste furnace has completed out-of-cell testing and is being installed in the Hot Fuel Examination Facility. Also, ceramic waste process development and qualification is progressing so integrated nuclear fuel separations and high level waste processes will exist at Idaho National Laboratory. These operations have provided important scale-up and performance data on engineering scale operations. Idaho National Laboratory is also increasing their laboratory scale capabilities so new process improvements and new concepts can be tested before implementation at engineering scale. This paper provides an overview of recent achievements and provides the interested reader references for more details. (authors)

  7. CARBON FIBER COMPOSITES IN HIGH VOLUME

    SciTech Connect (OSTI)

    Warren, Charles David; Das, Sujit; Jeon, Dr. Saeil

    2014-01-01

    Vehicle lightweighting represents one of several design approaches that automotive and heavy truck manufacturers are currently evaluating to improve fuel economy, lower emissions, and improve freight efficiency (tons-miles per gallon of fuel). With changes in fuel efficiency and environmental regulations in the area of transportation, the next decade will likely see considerable vehicle lightweighting throughout the ground transportation industry. Greater use of carbon fiber composites and light metals is a key component of that strategy. This paper examines the competition between candidate materials for lightweighting of heavy vehicles and passenger cars. A 53-component, 25 % mass reduction, body-in-white cost analysis is presented for each material class, highlighting the potential cost penalty for each kilogram of mass reduction and then comparing the various material options. Lastly, as the cost of carbon fiber is a major component of the elevated cost of carbon fiber composites, a brief look at the factors that influence that cost is presented.

  8. A new tribological test for candidate brush seal materials evaluation

    SciTech Connect (OSTI)

    Fellenstein, J.A.; DellaCorte, C.

    1994-10-01

    A new tribological test for candidate brush seal materials evaluation has been developed. The sliding contact between the brush seal wires and their mating counterface journal is simulated by testing a small tuft of wire against the outside diameter of a high speed rotating shaft. The test configuration is similar to a standard block on ring geometry. The new tester provides the capability to measure both the friction and wear of candidate wire and counterface materials under controlled loading conditions in the gram to kilogram range. A wide test condition latitude of speeds (1 to 27 m/s), temperatures (25 to 700C), and loads (0.5 to 10 N) enables the simulation of many of the important tribological parameters found in turbine engine brush seals. This paper describes the new test rig and specimen configuration and presents initial data for candidate seal materials comparing tuft test results and wear surface morphology to field tested seal components.

  9. Fabrication of thorium bearing carbide fuels

    DOE Patents [OSTI]

    Gutierrez, Rueben L.; Herbst, Richard J.; Johnson, Karl W. R.

    1981-01-01

    Thorium-uranium carbide and thorium-plutonium carbide fuel pellets have been fabricated by the carbothermic reduction process. Temperatures of 1750.degree. C. and 2000.degree. C. were used during the reduction cycle. Sintering temperatures of 1800.degree. C. and 2000.degree. C. were used to prepare fuel pellet densities of 87% and >94% of theoretical, respectively. The process allows the fabrication of kilogram quantities of fuel with good reproducibility of chemicals and phase composition. Methods employing liquid techniques that form carbide microspheres or alloying-techniques which form alloys of thorium-uranium or thorium-plutonium suffer from limitation on the quantities processed of because of criticality concerns and lack of precise control of process conditions, respectively.

  10. SHIELDING AND DETECTOR RESPONSE CALCULATIONS PERTAINING TO CATEGORY 1 QUANTITIES OF PLUTONIUM AND HAND-HELD PLASTIC SCINTILLATORS

    SciTech Connect (OSTI)

    Couture, A.

    2013-06-07

    Nuclear facilities sometimes use hand-held plastic scintillator detectors to detect attempts to divert special nuclear material in situations where portal monitors are impractical. MCNP calculations have been performed to determine the neutron and gamma radiation field arising from a Category I quantity of weapons-grade plutonium in various shielding configurations. The shields considered were composed of combinations of lead and high-density polyethylene such that the mass of the plutonium plus shield was 22.7 kilograms. Monte-Carlo techniques were also used to determine the detector response to each of the shielding configurations. The detector response calculations were verified using field measurements of high-, medium-, and low- energy gamma-ray sources as well as a Cf-252 neutron source.

  11. Operating experience during high-level waste vitrification at the West Valley Demonstration Project

    SciTech Connect (OSTI)

    Valenti, P.J.; Elliott, D.I.

    1999-01-01

    This report provides a summary of operational experiences, component and system performance, and lessons learned associated with the operation of the Vitrification Facility (VF) at the West Valley Demonstration Project (WVDP). The VF was designed to convert stored high-level radioactive waste (HLW) into a stable waste form (borosilicate glass) suitable for disposal in a federal repository. Following successful completion on nonradioactive test, HLW processing began in July 1995. Completion of Phase 1 of HLW processing was reached on 10 June 1998 and represented the processing of 9.32 million curies of cesium-137 (Cs-137) and strontium-90 (Sr-90) to fill 211 canisters with over 436,000 kilograms of glass. With approximately 85% of the total estimated curie content removed from underground waste storage tanks during Phase 1, subsequent operations will focus on removal of tank heel wastes.

  12. Stable Isotope Enrichment Capabilities at ORNL

    SciTech Connect (OSTI)

    Egle, Brian; Aaron, W Scott; Hart, Kevin J

    2013-01-01

    The Oak Ridge National Laboratory (ORNL) and the US Department of Energy Nuclear Physics Program have built a high-resolution Electromagnetic Isotope Separator (EMIS) as a prototype for reestablishing a US based enrichment capability for stable isotopes. ORNL has over 60 years of experience providing enriched stable isotopes and related technical services to the international accelerator target community, as well as medical, research, industrial, national security, and other communities. ORNL is investigating the combined use of electromagnetic and gas centrifuge isotope separation technologies to provide research quantities (milligram to several kilograms) of enriched stable isotopes. In preparation for implementing a larger scale production facility, a 10 mA high-resolution EMIS prototype has been built and tested. Initial testing of the device has simultaneously collected greater than 98% enriched samples of all the molybdenum isotopes from natural abundance feedstock.

  13. Process for gamma ray induced degradation of polychlorinated biphenyls

    DOE Patents [OSTI]

    Meikrantz, D.H.; Mincher, B.J.; Arbon, R.E.

    1998-08-25

    The invention is a process for the in-situ destruction of polychlorinated biphenyl (PCB) compounds in transformer oils and transformers. These compounds are broken down selectively by irradiation of the object or mixture using spent nuclear fuel or any isotopic source of high energy gamma radiation. For example, the level of applied dose required to decompose 400 ppm of polychlorinated biphenyl in transformer oil to less than 50 ppm is 500 kilograms. Destruction of polychlorinated biphenyls to levels of less than 50 ppm renders the transformer oil or transformer non-PCB contaminated under current regulations. Therefore, this process can be used to treat PCB contaminated oil and equipment to minimize or eliminate the generation of PCB hazardous waste. 5 figs.

  14. Zirconia-coated carbonyl-iron-particle-based magnetorheological fluid for polishing optical glasses and ceramics

    SciTech Connect (OSTI)

    Shafrir, Shai N.; Romanofsky, Henry J.; Skarlinski, Michael; Wang, Mimi; Miao, Chunlin; Salzman, Sivan; Chartier, Taylor; Mici, Joni; Lambropoulos, John C.; Shen Rui; Yang Hong; Jacobs, Stephen D.

    2009-12-10

    We report on magnetorheological finishing (MRF) spotting experiments performed on glasses and ceramics using a zirconia-coated carbonyl-iron (CI)-particle-based magnetorheological (MR) fluid. The zirconia-coated magnetic CI particles were prepared via sol-gel synthesis in kilogram quantities. The coating layer was {approx}50-100 nm thick, faceted in surface structure, and well adhered. Coated particles showed long-term stability against aqueous corrosion. ''Free'' nanocrystalline zirconia polishing abrasives were cogenerated in the coating process, resulting in an abrasive-charged powder for MRF. A viable MR fluid was prepared simply by adding water. Spot polishing tests were performed on a variety of optical glasses and ceramics over a period of nearly three weeks with no signs of MR fluid degradation or corrosion. Stable material removal rates and smooth surfaces inside spots were obtained.

  15. Assessment of alternatives for management of ORNL retrievable transuranic waste. Nuclear Waste Program: transuranic waste (Activity No. AR 05 15 15 0; ONL-WT04)

    SciTech Connect (OSTI)

    Not Available

    1980-10-01

    Since 1970, solid waste with TRU or U-233 contamination in excess of 10 ..mu..Ci per kilogram of waste has been stored in a retrievable fashion at ORNL, such as in ss drums, concrete casks, and ss-lined wells. This report describes the results of a study performed to identify and evaluate alternatives for management of this waste and of the additional waste projected to be stored through 1995. The study was limited to consideration of the following basic strategies: Strategy 1: Leave waste in place as is; Strategy 2: Improve waste confinement; and Strategy 3: Retrieve waste and process for shipment to a Federal repository. Seven alternatives were identified and evaluated, one each for Strategies 1 and 2 and five for Strategy 3. Each alternative was evaluated from the standpoint of technical feasibility, cost, radiological risk and impact, regulatory factors and nonradiological environmental impact.

  16. Novel Solid State Magnetocaloric Air Conditioner

    Broader source: Energy.gov [DOE]

    Lead Performer: Oak Ridge National Laboratory, Oak Ridge, TN Partners: Vaccumschmelze GmbH & Co. KG., Hanau, Germany

  17. Fast Flux Test Facility (FFTF) Briefing Book 1 Summary

    SciTech Connect (OSTI)

    WJ Apley

    1997-12-01

    This report documents the results of evaluations preformed during 1997 to determine what, if an, future role the Fast Flux Test Facility (FFTF) might have in support of the Department of Energy’s tritium productions strategy. An evaluation was also conducted to assess the potential for the FFTF to produce medical isotopes. No safety, environmental, or technical issues associated with producing 1.5 kilograms of tritium per year in the FFTF have been identified that would change the previous evaluations by the Department of Energy, the JASON panel, or Putnam, Hayes & Bartlett. The FFTF can be refitted and restated by July 2002 for a total expenditure of $371 million, with an additional $64 million of startup expense necessary to incorporate the production of medical isotopes. Therapeutic and diagnostic applications of reactor-generated medical isotopes will increase dramatically over the next decade. Essential medical isotopes can be produced in the FFTF simultaneously with tritium production, and while a stand-alone medical isotope mission for the facility cannot be economically justified given current marker conditions, conservative estimates based on a report by Frost &Sullivan indicate that 60% of the annual operational costs (reactor and fuel supply) could be offset by revenues from medical isotope production within 10 yeas of restart. The recommendation of the report is for the Department of Energy to continue to maintain the FFTF in standby and proceed with preparation of appropriate Nations Environmental Policy Act documentation in full consultation with the public to consider the FFTF as an interim tritium production option (1.5 kilograms/year) with a secondary mission of producing medical isotopes.

  18. Replacement of chlorofluorocarbons (CFCs) at the DOE Gaseous Diffusion Plants: An assessment of global impacts

    SciTech Connect (OSTI)

    Socolof, M.L.; Saylor, R.E.; McCold, L.N.

    1994-12-31

    The US Department of Energy (DOE) operates two uranium enrichment plants. Together, the two plants maintain an inventory of approximately 14 million pounds of a chlorofluorocarbon (CFC), dichlorote-trafluoroethane (CFC-114) as a coolant. Annual operational CFC-114 losses total over 500,000 pounds. In February, 1992, President Bush announced that the US would terminate manufacture and importation of Class 1 ozone depleting substances (including CFC-114) by the end of 1995. To comply with this requirement DOE has considered introducing a replacement coolant by the end of 1995. Two perfluorocarbons (PFCs) - namely, octofluoro-cyclobutane and decafluorobutane - are presently the only known coolants that could meet safety requirements. They would not contribute to stratospheric ozone depletion but contribute to global warming. The paper describes an analysis of the potential global impacts of the proposed replacement of CFC-114 with a PFC. A problem with analyses of global warming and ozone depletion impacts is that even large sources of compounds that contribute to these effects contribute only very small fractions of the total effect. The authors take the position that significant effects to global warming and ozone depletion have already occurred, and that any additional contribution to these effects are contributions to cumulatively significant adverse effects on the environment. The paper describes four alternatives and the extent to which each would contribute to global warming and ozone depletion.

  19. Mechanics of compression drying solid wood cubes and chip mats

    SciTech Connect (OSTI)

    Haygreen, J.G.

    1982-10-01

    Wood cubes and chip mats were compressed in a cell under ram face pressures to 13,000 psi. The amount of water removed was determined for a range of species of various specific gravities and at several green moisture contents (MCs). The time dependence of the process was also studied. The purpose of this work was to describe the mechanics of compression drying which must be considered in designing commercial equipment. Green MC of wood chip mats was reduced to 45 to 50 percent MC (31% to 33% MC, wet basis) at pressures of 13,000 psi. At low pressures of 1,000 to 2,000 psi, moisture was reduced to 60 to 75 percent MC (38% to 43% MC, wet basis). There was a significantly greater moisture reduction at these low pressures if the pressure is maintained for up to 2 minutes rather than releasing it immediately once the target pressure is obtained. Water can be removed from high density species but pressures required are higher by a factor of 2 to 3. The chip mat is reduced to about one-sixth of its original volume at 2,000 psi and one-seventh at 6,000 psi. When pressing cubes of high green MC, about 7,000 foot-pounds of work (equivalent to 9 Btu) applied to the wood will remove up to 1 pound of water. (Refs. 9).

  20. Transportable Vitrification System RCRA Closure Practical Waste Disposition Saves Time And Money

    SciTech Connect (OSTI)

    Brill, Angie; Boles, Roger; Byars, Woody

    2003-02-26

    The Transportable Vitrification System (TVS) was a large-scale vitrification system for the treatment of mixed wastes. The wastes contained both hazardous and radioactive materials in the form of sludge, soil, and ash. The TVS was developed to be moved to various United States Department of Energy (DOE) facilities to vitrify mixed waste as needed. The TVS consists of four primary modules: (1) Waste and Additive Materials Processing Module; (2) Melter Module; (3) Emissions Control Module; and (4) Control and Services Module. The TVS was demonstrated at the East Tennessee Technology Park (ETTP) during September and October of 1997. During this period, approximately 16,000 pounds of actual mixed waste was processed, producing over 17,000 pounds of glass. After the demonstration was complete it was determined that it was more expensive to use the TVS unit to treat and dispose of mixed waste than to direct bury this waste in Utah permitted facility. Thus, DOE had to perform a Resource Conservation and Recovery Act (RCRA) closure of the facility and find a reuse for as much of the equipment as possible. This paper will focus on the following items associated with this successful RCRA closure project: TVS site closure design and implementation; characterization activities focused on waste disposition; pollution prevention through reuse; waste minimization efforts to reduce mixed waste to be disposed; and lessons learned that would be integrated in future projects of this magnitude.

  1. Mixed Waste Treatment Cost Analysis for a Range of GeoMelt Vitrification Process Configurations

    SciTech Connect (OSTI)

    Thompson, L. E.

    2002-02-27

    GeoMelt is a batch vitrification process used for contaminated site remediation and waste treatment. GeoMelt can be applied in several different configurations ranging from deep subsurface in situ treatment to aboveground batch plants. The process has been successfully used to treat a wide range of contaminated wastes and debris including: mixed low-level radioactive wastes; mixed transuranic wastes; polychlorinated biphenyls; pesticides; dioxins; and a range of heavy metals. Hypothetical cost estimates for the treatment of mixed low-level radioactive waste were prepared for the GeoMelt subsurface planar and in-container vitrification methods. The subsurface planar method involves in situ treatment and the in-container vitrification method involves treatment in an aboveground batch plant. The projected costs for the subsurface planar method range from $355-$461 per ton. These costs equate to 18-20 cents per pound. The projected cost for the in-container method is $1585 per ton. This cost equates to 80 cents per pound. These treatment costs are ten or more times lower than the treatment costs for alternative mixed waste treatment technologies according to a 1996 study by the US Department of Energy.

  2. Lithium-Sulfur Batteries: Development of High Energy Lithium-Sulfur Cells for Electric Vehicle Applications

    SciTech Connect (OSTI)

    2010-10-01

    BEEST Project: Sion Power is developing a lithium-sulfur (Li-S) battery, a potentially cost-effective alternative to the Li-Ion battery that could store 400% more energy per pound. All batteries have 3 key partsa positive and negative electrode and an electrolytethat exchange ions to store and release electricity. Using different materials for these components changes a batterys chemistry and its ability to power a vehicle. Traditional Li-S batteries experience adverse reactions between the electrolyte and lithium-based negative electrode that ultimately limit the battery to less than 50 charge cycles. Sion Power will sandwich the lithium- and sulfur-based electrode films around a separator that protects the negative electrode and increases the number of charges the battery can complete in its lifetime. The design could eventually allow for a battery with 400% greater storage capacity per pound than Li-Ion batteries and the ability to complete more than 500 recharge cycles.

  3. Utilization of geothermal heat in tropical fruit-drying process

    SciTech Connect (OSTI)

    Chen, B.H.; Lopez, L.P.; King, R.; Fujii, J.; Tanaka, M.

    1982-10-01

    The power plant utilizes only the steam portion of the HGP-A well production. There are approximately 50,000 pounds per hour of 360/sup 0/F water produced (approximately 10 million Btu per hour) and the water is currently not used and is considered a waste. This tremendous resource could very well be used in applications such as food processing, food dehydration and other industrial processing that requires low-grade heat. One of the applications is examined, namely the drying of tropical fruits particularly the papaya. The papaya was chosen for the obvious reason that it is the biggest crop of all fruits produced on the Big Island. A conceptual design of a pilot plant facility capable of processing 1000 pounds of raw papaya per day is included. This facility is designed to provide a geothermally heated dryer to dehydrate papayas or other tropical fruits available on an experimental basis to obtain data such as drying time, optimum drying temperature, etc.

  4. DEVELOPMENT OF CONTINUOUS SOLVENT EXTRACTION PROCESSES FOR COAL DERIVED CARBON PRODUCTS

    SciTech Connect (OSTI)

    Elliot Kennel; Chong Chen; Dady Dadyburjor; Mark Heavner; Manoj Katakdaunde; Liviu Magean; James Mayberry; Alfred Stiller; Joseph Stoffa; Christopher Yurchick; John Zondlo

    2009-12-31

    This NETL sponsored effort seeks to develop continuous technologies for the production of carbon products, which may be thought of as the heavier products currently produced from refining of crude petroleum and coal tars obtained from metallurgical grade coke ovens. This effort took binder grade pitch, produced from liquefaction of West Virginia bituminous grade coal, all the way to commercial demonstration in a state of the art arc furnace. Other products, such as crude oil, anode grade coke and metallurgical grade coke were demonstrated successfully at the bench scale. The technology developed herein diverged from the previous state of the art in direct liquefaction (also referred to as the Bergius process), in two major respects. First, direct liquefaction was accomplished with less than a percent of hydrogen per unit mass of product, or about 3 pound per barrel or less. By contrast, other variants of the Bergius process require the use of 15 pounds or more of hydrogen per barrel, resulting in an inherent materials cost. Second, the conventional Bergius process requires high pressure, in the range of 1500 psig to 3000 psig. The WVU process variant has been carried out at pressures below 400 psig, a significant difference. Thanks mainly to DOE sponsorship, the WVU process has been licensed to a Canadian Company, Quantex Energy Inc, with a commercial demonstration unit plant scheduled to be erected in 2011.

  5. PROCESS OF RECOVERING URANIUM FROM ITS ORES

    DOE Patents [OSTI]

    Galvanek, P. Jr.

    1959-02-24

    A process is presented for recovering uranium from its ores. The crushed ore is mixed with 5 to 10% of sulfuric acid and added water to about 5 to 30% of the weight of the ore. This pugged material is cured for 2 to 3 hours at 100 to 110 deg C and then cooled. The cooled mass is nitrate-conditioned by mixing with a solution equivalent to 35 pounds of ammunium nitrate and 300 pounds of water per ton of ore. The resulting pulp containing 70% or more solids is treated by upflow percolation with a 5% solution of tributyl phosphate in kerosene at a rate equivalent to a residence time of about one hour to extract the solubilized uranium. The uranium is recovered from the pregnant organic liquid by counter-current washing with water. The organic extractant may be recycled. The uranium is removed from the water solution by treating with ammonia to precipitate ammonium diuranate. The filtrate from the last step may be recycled for the nitrate-conditioning treatment.

  6. Air pollution EPA'S efforts to control gasoline vapors from motor vehicles

    SciTech Connect (OSTI)

    Not Available

    1989-01-01

    This report examines ozone, often called smog, which is a respiratory irritant, and long-term exposure may cause permanent lung damage. Attempts by EPA to reduce gasoline vapors, a major contributor to ozone, by requiring refiners to lower the volatility (evaporation rate) of gasoline sold during the summer months when most high ozone levels occur and auto manufacturers to install vapor recovery equipment (onboard controls) on motor vehicles. Beginning in 1989 (Phase I), the maximum volatility of gasoline sold during the summer would fall to 10.5 pounds per square inch and beginning in 1992 (Phase II), the maximum volatility would fall to 9.0 pounds per square inch. EPA has not yet acted on Phase II reductions because it disagrees with the Department of Transportation on the dangers of adding onboard controls to vehicles. DOT believes the onboard controls may pose an increased risk of fire during crashes. In this report's view, the Stage II controls are a practical and feasible way to control refueling vapors and that onboard controls may well surpass the effectiveness of Phase II controls and therefore should not be abandoned as a way to reduce gasoline vapors.

  7. Final report of Project 617, the Energy Saver

    SciTech Connect (OSTI)

    1996-12-31

    The Project work was begun in January of 1995 and was completed in May of 1996. The authors performed a broad value engineering study to examine all parts and functions to lower costs, improve functioning and safety. The results of the Phase 1 work was a total redesign of the original Energy Saver resulting in two components instead of three, a weight of four pounds versus the original fourteen pounds and a reduction from 21 pieces to 10 pieces. The manufactured cost dropped from $350 to $175. Based on these improvements the Value Improvement Project has been successful. The second generation unit was named the BROIL-MASTER and has been registered under the Provisional Application (Patent) Program. The authors performed a technical analysis to determine the potential energy savings of applications identified and collect data on host product gas consumption, payback period, and other cost/saving relationships. The industrial search for energy project applications for the authors design was not successful. Seven Broil-Master demonstration projects have been successfully completed. The Broil-Master has received certification from the American Gas Association and UL approval is due by the end of July. The Restaurant Equipment Test Center of Pacific Gas and Electric is interested in testing the Broil-Master sometime in 1996. The Broil-Master was shown at an International Restaurant Equipment Show in September, 1995 and the National Restaurant Show in May, 1996. The authors now have under way four tests with chains and several other tests pending.

  8. Assessment of coal cleaning for trace element control. Final report

    SciTech Connect (OSTI)

    Akers, D.; Arnold, B.

    1998-12-01

    Current methods of cleaning coal already reduce the concentration of most of the elements named as hazardous air pollutants (HAPs) under Title 3 of the 1990 Clean Air Act Amendments because most of these elements are associated with ash-forming or sulfur-bearing minerals. Advanced methods of physical cleaning may prove even more effective than conventional cleaning technologies, in HAPs control, especially if the coal is crushed before cleaning. The most significant disadvantage of conventional or advanced physical cleaning methods for HAPs control is that reductions of 90% or greater from as-fired coal may not be possible. Chemical and biologic methods of cleaning coal can potentially remove greater amounts of at least some HAPs elements than conventional or advanced physical cleaning methods. At least one promising chemical process (HAPs-Rx) has been developed and tested at laboratory scale that has the potential of removing over half of the mercury and arsenic remaining in coal after conventional cleaning. An assessment of the cost and effectiveness of conventional, advanced, and the HAPs-Rx chemical process was performed using laboratory data and computer simulations. The study found that the cost of removing a pound of mercury from coal by cleaning often compared favorably with cost projections by the Environmental Protection Agency for removing a pound of mercury by activated carbon injection.

  9. CWS-Fired Residential Warm-Air Heating System. Quarterly report, February 1, 1989--April 30, 1989

    SciTech Connect (OSTI)

    Balsavich, J.; Becker, F.E.; Smolensky, L.A.

    1989-07-01

    During the report period, work continued on the life-cycle testing, optimization and refining of the second-generation furnace assembly, which comprises all the major furnace components: The combustor, heat exchanger, and baghouse, as well as the auxiliary subsystems. The furnace has operated for about 90 hours, and has burned 1,000 pounds of CWS. During testing, the only maintenance that was performed on the system was to clean the bag filters to obtain ash samples for analysts. Concurrent with testing the second-generation furnace, fabrication and assembly of the third-generation furnace was completed, and a life-cycle testing and optimization process for this furnace has started. In contrast to the second-generation furnace, which was designed more as an experimental unit, the third-generation furnace is a stand-alone heating unit Incorporating the standard air handling system, blower, pump, and control box as part of the furnace. During the report period, the third-generation furnace operated for a total of 35 hours, and burned more than 300 pounds of CWS, with average tests lasting 6 hours. During the next quarter, life-cycle testing of the third-generation furnace will continue to identify areas needing further development.

  10. CWS-Fired Residential Warm-Air Heating System

    SciTech Connect (OSTI)

    Balsavich, J.; Becker, F.E.; Smolensky, L.A.

    1989-07-01

    During the report period, work continued on the life-cycle testing, optimization and refining of the second-generation furnace assembly, which comprises all the major furnace components: The combustor, heat exchanger, and baghouse, as well as the auxiliary subsystems. The furnace has operated for about 90 hours, and has burned 1,000 pounds of CWS. During testing, the only maintenance that was performed on the system was to clean the bag filters to obtain ash samples for analysts. Concurrent with testing the second-generation furnace, fabrication and assembly of the third-generation furnace was completed, and a life-cycle testing and optimization process for this furnace has started. In contrast to the second-generation furnace, which was designed more as an experimental unit, the third-generation furnace is a stand-alone heating unit Incorporating the standard air handling system, blower, pump, and control box as part of the furnace. During the report period, the third-generation furnace operated for a total of 35 hours, and burned more than 300 pounds of CWS, with average tests lasting 6 hours. During the next quarter, life-cycle testing of the third-generation furnace will continue to identify areas needing further development.

  11. Design and Test of the CC Cryostat Head Cart

    SciTech Connect (OSTI)

    Jaques, Al; /Fermilab

    1989-08-08

    This Engineering Note documents the design of the stand to be used to transport the CC Cryostat heads into the D-Zero clean room. Due to the width of the clean room access door, the heads will have to be upright to fit through. This head cart will hold the heads upright and wheel them into the clean room on a guided track. Before the wheels are placed on the heat cart, it will be used as a stand to place the heads on for the purpose of test fitting the super insulation. The head cart will not only be structurally sufficient to support the weight of the heads but also stiff enough to allow a maximum deflection of 1/2-inch at the end of the 48-inch cylinder. The heaviest head assembly weighs about 9000 pounds. Following A.I.S.C. specifications and using a 9000 pound design load, the head cart was initially designed and built and later modified in order to meet the deflection requirements. Bending and tension stresses were limited to two thirds the yield strength. Weld and shear stresses are limited to 0.4*Fy. The C7 X 12.25 channels, the L2.5 X 2.5 X 0.25 angles adn the 1/2-inch plate are all A36 steel. In order to validate the need for an end plate in the 48-inch cylinder, an ANSYS model was created of the cylinder itself to determine it's rigidity under a point load applied at it's outer end. Appendix D contains the results which demonstrate the rigidity of the cylinder-end plate assembly. Also included is a Frame-Mac simulation of the head cart which was used to estimate the deflection at the cylinder end. A load test was performed to 133% of the rated capacity, or 12,000 pounds. The test load was incrementally applied using a crane and hook scale. A graph of deflection vs. load is shown in Appendix E. A spreader beam was designed and built to properly test the head cart. Stress calculations for this test spreader beam are included in Appendix C.

  12. Toxecon Retrofit for Mercury and Mulit-Pollutant Control on Three 90-MW Coal-Fired Boilers

    SciTech Connect (OSTI)

    Steven Derenne; Robin Stewart

    2009-09-30

    This U.S. Department of Energy (DOE) Clean Coal Power Initiative (CCPI) project was based on a cooperative agreement between We Energies and the DOE Office of Fossil Energy's National Energy Technology Laboratory (NETL) to design, install, evaluate, and demonstrate the EPRI-patented TOXECON{trademark} air pollution control process. Project partners included Cummins & Barnard, ADA-ES, and the Electric Power Research Institute (EPRI). The primary goal of this project was to reduce mercury emissions from three 90-MW units that burn Powder River Basin coal at the We Energies Presque Isle Power Plant in Marquette, Michigan. Additional goals were to reduce nitrogen oxide (NO{sub x}), sulfur dioxide (SO{sub 2}), and particulate matter emissions; allow reuse and sale of fly ash; advance commercialization of the technology; demonstrate a reliable mercury continuous emission monitor (CEM) suitable for use at power plants; and demonstrate recovery of mercury from the sorbent. Mercury was controlled by injection of activated carbon upstream of the TOXECON{trademark} baghouse, which achieved more than 90% removal on average over a 44-month period. During a two-week test involving trona injection, SO{sub 2} emissions were reduced by 70%, although no coincident removal of NOx was achieved. The TOXECON{trademark} baghouse also provided enhanced particulate control, particularly during startup of the boilers. On this project, mercury CEMs were developed and tested in collaboration with Thermo Fisher Scientific, resulting in a reliable CEM that could be used in the power plant environment and that could measure mercury as low as 0.1 {micro}g/m{sup 3}. Sorbents were injected downstream of the primary particulate collection device, allowing for continued sale and beneficial use of captured fly ash. Two methods for recovering mercury using thermal desorption on the TOXECON{trademark} PAC/ash mixture were successfully tested during this program. Two methods for using the TOXECON{trademark} PAC/ash mixture in structural concrete were also successfully developed and tested. This project demonstrated a significant reduction in the rate of emissions from Presque Isle Units 7, 8, and 9, and substantial progress toward establishing the design criteria for one of the most promising mercury control retrofit technologies currently available. The Levelized Cost for 90% mercury removal at this site was calculated at $77,031 per pound of mercury removed with a capital cost of $63,189 per pound of mercury removed. Mercury removal at the Presque Isle Power Plant averages approximately 97 pounds per year.

  13. Validation of an Integrated Hydrogen Energy Station

    SciTech Connect (OSTI)

    Edward C. Heydorn

    2012-10-26

    This report presents the results of a 10-year project conducted by Air Products and Chemicals, Inc. (Air Products) to determine the feasibility of coproducing hydrogen with electricity. The primary objective was to demonstrate the technical and economic viability of a hydrogen energy station using a high-temperature fuel cell designed to produce power and hydrogen. This four-phase project had intermediate go/no-go decisions and the following specific goals: • Complete a technical assessment and economic analysis of the use of high-temperature fuel cells, including solid oxide and molten carbonate, for the co-production of power and hydrogen (energy park concept). • Build on the experience gained at the Las Vegas H2 Energy Station and compare/contrast the two approaches for co-production. • Determine the applicability of co-production from a high-temperature fuel cell for the existing merchant hydrogen market and for the emerging hydrogen economy. • Demonstrate the concept on natural gas for six months at a suitable site with demand for both hydrogen and electricity. • Maintain safety as the top priority in the system design and operation. • Obtain adequate operational data to provide the basis for future commercial activities, including hydrogen fueling stations. Work began with the execution of the cooperative agreement with DOE on 30 September 2001. During Phase 1, Air Products identified high-temperature fuel cells as having the potential to meet the coproduction targets, and the molten carbonate fuel cell system from FuelCell Energy, Inc. (FuelCell Energy) was selected by Air Products and DOE following the feasibility assessment performed during Phase 2. Detailed design, construction and shop validation testing of a system to produce 250 kW of electricity and 100 kilograms per day of hydrogen, along with site selection to include a renewable feedstock for the fuel cell, were completed in Phase 3. The system also completed six months of demonstration operation at the wastewater treatment facility operated by Orange County Sanitation District (OCSD, Fountain Valley, CA). As part of achieving the objective of operating on a renewable feedstock, Air Products secured additional funding via an award from the California Air Resources Board. The South Coast Air Quality Management District also provided cost share which supported the objectives of this project. System operation at OCSD confirmed the results from shop validation testing performed during Phase 3. Hydrogen was produced at rates and purity that met the targets from the system design basis, and coproduction efficiency exceeded the 50% target set in conjunction with input from the DOE. Hydrogen production economics, updated from the Phase 2 analysis, showed pricing of $5 to $6 per kilogram of hydrogen using current gas purification systems. Hydrogen costs under $3 per kilogram are achievable if next-generation electrochemical separation technologies become available.

  14. Section 7

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Values in parentheses are (contour interval, maximum value) in g kg . Horizontal scale ... in precipitation efficiency are much less than the changes in cloud water production. ...

  15. U.S. DOE Webinar Series - 2011-2012 Hydrogen Student Design Contest

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Total manure available per day is 27,387 kg. * 95% of rice production in California takes ... * Catalyst is Zeolite, Activated Carbon, Silica Gel * Cycling Schedule: Pressurization, ...

  16. Distributed Hydrogen Production from Natural Gas: Independent Review Panel Report

    Office of Energy Efficiency and Renewable Energy (EERE)

    Independent review report on the available information concerning the technologies needed for forecourts producing 150 kg/day of hydrogen from natural gas.

  17. Pathways to Hydrocarbon Biofuels: Update on the Office's Techno...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Pathway TEA - Sustainability Coordination Design Report Environmental Sustainability Metrics GHG emissions kg CO2eGJ Conversion Plant Fossil Energy Consumption MJMJ ...

  18. DOE-STD-1090-2004; Hoisting and Rigging (Formerly Hoisting and...

    Energy Savers [EERE]

    (4,500 kg) or More for Nuclear Materials." 14.1 GENERAL ... 14.2.6 Testing......shall be documented in the equipment history file. b. ...

  19. Hoisting and Rigging

    Energy Savers [EERE]

    (4,500 kg) or More for Nuclear Materials." 14.1 GENERAL ... 14.2.6 Testing......shall be documented in the equipment history file. b. ...

  20. EERE Success Story-Lightweight Technology Resolved Challenge...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    underbody of a vehicle while carrying its crash loads, developed an underbody 13 kg ... When researchers tested the underbody through a simulated 40 mph crash, they found it ...