Sample records for key components building

  1. Team Building Toolkit KEYS -Keys to Enhance Your Supervisory Success

    E-Print Network [OSTI]

    Walker, Matthew P.

    Team Building Toolkit KEYS - Keys to Enhance Your Supervisory Success University of California to Enhance Your Supervisory Success 2 | P a g e Table of Contents Stages of Team Development ................................................................................................ 4 Team Building at a Glance

  2. Cooling Towers: Understanding Key Components of Cooling Towers...

    Office of Environmental Management (EM)

    Cooling Towers: Understanding Key Components of Cooling Towers and How to Improve Water Efficiency Cooling Towers: Understanding Key Components of Cooling Towers and How to Improve...

  3. Outsourcing the Design of Structural Building Components

    E-Print Network [OSTI]

    Swearingin, Adam V.

    2008-05-16T23:59:59.000Z

    component design work stateside. vi 1 Introduction The outsourcing of structural building component design has recently become available to component manufacturers in the United States. These manufacturers of metal plate connected (MPC) wood roof... of the effectiveness of outsourcing as a means of fulfilling the design requirements of MPC wood trusses. Although 1 this report does not evaluate other structural building components (i.e., i- joists, engineered wood beams and wall panels), the analysis provided...

  4. Building America Expert Meeting: Key Innovations for Adding Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Key Innovations for Adding Energy Efficiency to Maintenance Projects Building America Expert Meeting: Key Innovations for Adding Energy Efficiency to Maintenance Projects This...

  5. Building commissioning: The key to quality assurance

    SciTech Connect (OSTI)

    NONE

    1998-05-01T23:59:59.000Z

    This Guide is written to aid building owners and retrofit project managers currently participating in the Rebuild America program. The Guide provides information on implementing building commissioning projects that will optimize the results of existing building equipment improvements and retrofits projects. It should be used in coordination with Rebuild America`s Community Partnership Handbook. The Handbook describes, in detail, eight important steps necessary for planning and carrying out a community-wide energy-efficiency program. In step number 7 of the Handbook, commissioning is shown to be an integral aspect of implementing a building retrofit. The commissioning process ensures that a facility is safe, efficient, comfortable, and conducive to the presumed activities for which it was constructed. Rebuild America strongly encourages its partners to incorporate commissioning into their retrofit projects. By verifying the correct installation, functioning, operation, and maintenance of equipment, the commissioning process ensures that efficiency measures will continue to deliver benefits over the long term. Although commissioning can take place after the equipment has been installed, it is more effective when it takes place over the entire equipment installation process.

  6. Faculty & Information Centres Building Car Park Key Facilities Building Car Park

    E-Print Network [OSTI]

    7 WATER TANK 5 4 18 S Faculty & Information Centres Building Car Park Key Facilities Building Car ORANGE Childcare Centre 3 GREEN A GREEN Chinese Garden - adjacent 1 YELLOW A YELLOW Essington House Darwin Reception 1 BROWN F BLUE Post Office 1 RED F BLUE Printery 1 GREEN A GREEN Student Square

  7. (Durability of building materials and components)

    SciTech Connect (OSTI)

    Naus, D.J.

    1990-11-27T23:59:59.000Z

    The traveler participated in the fourth meeting of RILEM 100-TSL, Techniques for Service Life Prediction,'' and The Fifth International Conference on Durability of Building Materials and Components.'' In addition, the traveler met with staff members at Taywood Engineering Ltd., Electricite de France, and AEA Technology. The meeting pertained to performance of concrete materials in nuclear power plant structures, time variation of concrete material properties, methods for evaluating concrete structures, and modeling to predict the effects of degradation factors on concrete materials. As many of the concrete structures in general civil engineering applications as well as nuclear power plant applications in Europe are aging, there is increasing emphasis on assessing the durability of these structures. Information was provided of direct application to the Structural Aging Program which would not have been available without these visits. Of equal, or possibly more importance, was the individual contacts established at the organizations visited. Each organization was extremely interested in both the approach and scope of the Structural Aging Program and requested that they be informed of progress. The initial steps were taken to cooperate with several of these researchers and this should help the Structural Aging Program keep abreast of related European activities. In summary, information obtained during this trip will benefit the ongoing Structural Aging Program by informing Oak Ridge National Laboratory (ORNL) of the extensive European research programs addressing the durability of concrete structures, and also by forming and strengthening acquaintances with counterparts in other countries, thus enhancing the basis for possible international cooperation.

  8. Building Component Library: An Online Repository to Facilitate Building Energy Model Creation; Preprint

    SciTech Connect (OSTI)

    Fleming, K.; Long, N.; Swindler, A.

    2012-05-01T23:59:59.000Z

    This paper describes the Building Component Library (BCL), the U.S. Department of Energy's (DOE) online repository of building components that can be directly used to create energy models. This comprehensive, searchable library consists of components and measures as well as the metadata which describes them. The library is also designed to allow contributors to easily add new components, providing a continuously growing, standardized list of components for users to draw upon.

  9. NREL's Building Component Library for Use with Energy Models

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    The Building Component Library (BCL) is the U.S. Department of Energy’s comprehensive online searchable library of energy modeling building blocks and descriptive metadata. Novice users and seasoned practitioners can use the freely available and uniquely identifiable components to create energy models and cite the sources of input data, which will increase the credibility and reproducibility of their simulations. The BCL contains components which are the building blocks of an energy model. They can represent physical characteristics of the building such as roofs, walls, and windows, or can refer to related operational information such as occupancy and equipment schedules and weather information. Each component is identified through a set of attributes that are specific to its type, as well as other metadata such as provenance information and associated files. The BCL also contains energy conservation measures (ECM), referred to as measures, which describe a change to a building and its associated model. For the BCL, this description attempts to define a measure for reproducible application, either to compare it to a baseline model, to estimate potential energy savings, or to examine the effects of a particular implementation. The BCL currently contains more than 30,000 components and measures. A faceted search mechanism has been implemented on the BCL that allows users to filter through the search results using various facets. Facet categories include component and measure types, data source, and energy modeling software type. All attributes of a component or measure can also be used to filter the results.

  10. Building Component Library | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual Siteof EnergyInnovation in CarbonofBiotinsBostonBridgerBuckeye Power, IncBuffaloComponent

  11. US Green Building Council Keys Branch Presents: Designing Mosquito Free Cisterns

    E-Print Network [OSTI]

    Watson, Craig A.

    US Green Building Council Keys Branch Presents: Designing Mosquito Free Cisterns For Contractors their return to popularity. Overview of the City of Key Wests' BPAS Ordinance and Green Building. By Allison Design, Inc., ARCSA AP The role of Green Sustainability Organizations and the potential "Tipping Point

  12. Field Testing of Nano-PCM Enhanced Building Envelope Components

    SciTech Connect (OSTI)

    Biswas, Kaushik [ORNL; Childs, Phillip W [ORNL; Atchley, Jerald Allen [ORNL

    2013-08-01T23:59:59.000Z

    The U.S. Department of Energy s (DOE) Building Technologies Program s goal of developing high-performance, energy efficient buildings will require more cost-effective, durable, energy efficient building envelopes. Forty-eight percent of the residential end-use energy consumption is spent on space heating and air conditioning. Reducing envelope-generated heating and cooling loads through application of phase change material (PCM)-enhanced envelope components can facilitate maximizing the energy efficiency of buildings. Field-testing of prototype envelope components is an important step in estimating their energy benefits. An innovative phase change material (nano-PCM) was developed with PCM encapsulated with expanded graphite (interconnected) nanosheets, which is highly conducive for enhanced thermal storage and energy distribution, and is shape-stable for convenient incorporation into lightweight building components. During 2012, two test walls with cellulose cavity insulation and prototype PCM-enhanced interior wallboards were installed in a natural exposure test (NET) facility at Charleston, SC. The first test wall was divided into four sections, which were separated by wood studs and thin layers of foam insulation. Two sections contained nano-PCM-enhanced wallboards: one was a three-layer structure, in which nano-PCM was sandwiched between two gypsum boards, and the other one had PCM dispersed homogeneously throughout graphite nanosheets-enhanced gypsum board. The second test wall also contained two sections with interior PCM wallboards; one contained nano-PCM dispersed homogeneously in gypsum and the other was gypsum board containing a commercial microencapsulated PCM (MEPCM) for comparison. Each test wall contained a section covered with gypsum board on the interior side, which served as control or a baseline for evaluation of the PCM wallboards. The walls were instrumented with arrays of thermocouples and heat flux transducers. Further, numerical modeling of the walls containing the nano-PCM wallboards were performed to determine their actual impact on wall-generated heating and cooling loads. The models were first validated using field data, and then used to perform annual simulations using Typical Meteorological Year (TMY) weather data. This article presents the measured performance and numerical analysis to evaluate the energy-saving potential of the nano-PCM-enhanced building components.

  13. An Integrated Development Environment for Building Predictable Component-Based Embedded Systems

    E-Print Network [OSTI]

    Becker, Steffen

    Save-IDE An Integrated Development Environment for Building Predictable Component-Based Embedded-- In this paper we present an Integrated Development Environment Save-IDE, a toolset that embraces several tools-time properties, such as timing properties, and transforming the components to real-time execution elements. Save

  14. Key Residential Building Equipment Technologies for Control and Grid Support PART I (Residential)

    SciTech Connect (OSTI)

    Starke, Michael R [ORNL; Onar, Omer C [ORNL; DeVault, Robert C [ORNL

    2011-09-01T23:59:59.000Z

    Electrical energy consumption of the residential sector is a crucial area of research that has in the past primarily focused on increasing the efficiency of household devices such as water heaters, dishwashers, air conditioners, and clothes washer and dryer units. However, the focus of this research is shifting as objectives such as developing the smart grid and ensuring that the power system remains reliable come to the fore, along with the increasing need to reduce energy use and costs. Load research has started to focus on mechanisms to support the power system through demand reduction and/or reliability services. The power system relies on matching generation and load, and day-ahead and real-time energy markets capture most of this need. However, a separate set of grid services exist to address the discrepancies in load and generation arising from contingencies and operational mismatches, and to ensure that the transmission system is available for delivery of power from generation to load. Currently, these grid services are mostly provided by generation resources. The addition of renewable resources with their inherent variability can complicate the issue of power system reliability and lead to the increased need for grid services. Using load as a resource, through demand response programs, can fill the additional need for flexible resources and even reduce costly energy peaks. Loads have been shown to have response that is equal to or better than generation in some cases. Furthermore, price-incentivized demand response programs have been shown to reduce the peak energy requirements, thereby affecting the wholesale market efficiency and overall energy prices. The residential sector is not only the largest consumer of electrical energy in the United States, but also has the highest potential to provide demand reduction and power system support, as technological advancements in load control, sensor technologies, and communication are made. The prevailing loads based on the largest electrical energy consumers in the residential sector are space heating and cooling, washer and dryer, water heating, lighting, computers and electronics, dishwasher and range, and refrigeration. As the largest loads, these loads provide the highest potential for delivering demand response and reliability services. Many residential loads have inherent flexibility that is related to the purpose of the load. Depending on the load type, electric power consumption levels can either be ramped, changed in a step-change fashion, or completely removed. Loads with only on-off capability (such as clothes washers and dryers) provide less flexibility than resources that can be ramped or step-changed. Add-on devices may be able to provide extra demand response capabilities. Still, operating residential loads effectively requires awareness of the delicate balance of occupants health and comfort and electrical energy consumption. This report is Phase I of a series of reports aimed at identifying gaps in automated home energy management systems for incorporation of building appliances, vehicles, and renewable adoption into a smart grid, specifically with the intent of examining demand response and load factor control for power system support. The objective is to capture existing gaps in load control, energy management systems, and sensor technology with consideration of PHEV and renewable technologies to establish areas of research for the Department of Energy. In this report, (1) data is collected and examined from state of the art homes to characterize the primary residential loads as well as PHEVs and photovoltaic for potential adoption into energy management control strategies; and (2) demand response rules and requirements across the various demand response programs are examined for potential participation of residential loads. This report will be followed by a Phase II report aimed at identifying the current state of technology of energy management systems, sensors, and communication technologies for demand response and load factor control applications

  15. Object-Oriented Database for Managing Building Modeling Components and Metadata: Preprint

    SciTech Connect (OSTI)

    Long, N.; Fleming, K.; Brackney, L.

    2011-12-01T23:59:59.000Z

    Building simulation enables users to explore and evaluate multiple building designs. When tools for optimization, parametrics, and uncertainty analysis are combined with analysis engines, the sheer number of discrete simulation datasets makes it difficult to keep track of the inputs. The integrity of the input data is critical to designers, engineers, and researchers for code compliance, validation, and building commissioning long after the simulations are finished. This paper discusses an application that stores inputs needed for building energy modeling in a searchable, indexable, flexible, and scalable database to help address the problem of managing simulation input data.

  16. Abstract--A key component of the smart grid is the ability to enable dynamic residential pricing to incentivize the customer

    E-Print Network [OSTI]

    Sapatnekar, Sachin

    day-ahead variable peak pricing in order to minimize the customer's energy bill (and alsoAbstract-- A key component of the smart grid is the ability to enable dynamic residential pricing to incentivize the customer and the overall community to utilize energy more uniformly. However

  17. Statistical Modeling of Daily Energy Consumption in Commercial Buildings Using Multiple Regression and Principal Component Analysis

    E-Print Network [OSTI]

    Reddy, T. A.; Claridge, D.; Wu, J.

    analysis to identify these models. However, such models tend to suffer from physically unreasonable regression coefficients and instability due to the fact that the predictor variables (i.e., climatic parameters, building internal loads, etc...

  18. Measured piping and component heat losses from a typical SFBP (Solar in Federal Buildings Program) solar system

    SciTech Connect (OSTI)

    Francetic, J.S.; Robinson, K.S.

    1987-07-01T23:59:59.000Z

    Recent comprehensive monitoring of solar energy systems has indicated that heat losses from system piping and components are much higher than originally expected. Theoretical analyses conducted at the Energy Technology Engineering Center (ETEC) predict that operating plus standby (during shutdown) heat losses from a typical solar system could equal up to one-third of the total gross solar energy collected by the system. Detailed heat loss experiments were conducted on a Solar in Federal Buildings Program (SFBP)-monitored site to identify and quantify actual piping, component, and thermosiphon heat losses for a typical day. The selected solar system, SFBP 4008, is a solar space heating and domestic hot water (DHW) system located at the Eisenhower Memorial Museum at Abilene, Kansas. The system has 4200 ft/sup 2/ of collector array located at a considerable distance from the mechanical building. Long lengths of exterior above-ground and buried piping connect the collectors to the mechanical room. Valves and pumps are uninsulated. The heat loss experiments at the Eisenhower site showed that 25% of the energy collected on a summer day was lost in pipes and components. Detailed results are given. 8 refs., 64 figs., 17 tabs.

  19. The development of an alternate building system based on the use of an existing standardized component : precast, prestressed, hollow-core concrete slab

    E-Print Network [OSTI]

    Simovic, Laszlo

    1984-01-01T23:59:59.000Z

    The primary scope of this thesis is a conceptual design implementation for a new building systems approach. This system is based on a standardized, economically feasible and widely used prefabricated structural component. ...

  20. Breaking new ground in building green : the role of city policy and regulation in a building industry market transformation

    E-Print Network [OSTI]

    Prakash, Shiva R

    2010-01-01T23:59:59.000Z

    With a growing awareness of the need for a widespread reduction in the use of natural resources, including energy and water, buildings have been identified as a key component of America's, and the world's, drain on these ...

  1. Building America

    SciTech Connect (OSTI)

    Brad Oberg

    2010-12-31T23:59:59.000Z

    IBACOS researched the constructability and viability issues of using high performance windows as one component of a larger approach to building houses that achieve the Building America 70% energy savings target.

  2. Key Opportunities and Challenges for Program Sustainability ...

    Energy Savers [EERE]

    Key Opportunities and Challenges for Program Sustainability Key Opportunities and Challenges for Program Sustainability Better Buildings Neighborhood Program, Peer Exchange Call:...

  3. ZooKeys, unlocking Earth’s incredible biodiversity and building a sustainable bridge into the public domain: From “print-based” to “web-based” taxonomy, systematics, and natural history. ZooKeys Editorial Opening Paper

    E-Print Network [OSTI]

    Penev, Lyubomir; Erwin, Terry; Thompson, F. Christian; Sues, Hans-Dieter; Engel, Michael S.; Agosti, Donat; Pyle, Richard; Ivie, Michael; Assmann, Thorsten; Henry, Thomas; Miller, Jeremy; Ananjeva, Natalia; Casale, Achille; Lourenco, Wilson; Golovatch, Sergei; Fagerholm, Hans-Peter; Taiti, Stefano; Alonso-Zarazaga, Miguel; Nieukerken, Erik van

    2008-07-04T23:59:59.000Z

    and print journal in zoological taxonomy and systematics, which aims to quickly respond and adapt to the newest developments in taxonomic publishing. Open Access is accepted as mandatory for ZooKeys. Th e rationale for and concept of ZooKeys is discussed...

  4. System/Building Tech Integration | Clean Energy | ORNL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SystemBuilding Integration SHARE System Building Technologies Integration The buildings industry encompasses numerous designers, builders, construction materials and components...

  5. Smart Buildings: Business Case and Action Plan

    E-Print Network [OSTI]

    Ehrlich, Paul

    2009-01-01T23:59:59.000Z

    and typical building automation systems. A key element ofsystem and building automation systems for HVAC systemnetwork for Building Automation System (BAS) data. GSA is

  6. Proposed and existing passive and inherent safety-related structures, systems, and components (building blocks) for advanced light-water reactors

    SciTech Connect (OSTI)

    Forsberg, C.W.; Moses, D.L.; Lewis, E.B.; Gibson, R.; Pearson, R.; Reich, W.J.; Murphy, G.A.; Staunton, R.H.; Kohn, W.E.

    1989-10-01T23:59:59.000Z

    A nuclear power plant is composed of many structures, systems, and components (SSCs). Examples include emergency core cooling systems, feedwater systems, and electrical systems. The design of a reactor consists of combining various SSCs (building blocks) into an integrated plant design. A new reactor design is the result of combining old SSCs in new ways or use of new SSCs. This report identifies, describes, and characterizes SSCs with passive and inherent features that can be used to assure safety in light-water reactors. Existing, proposed, and speculative technologies are described. The following approaches were used to identify the technologies: world technical literature searches, world patent searches, and discussions with universities, national laboratories and industrial vendors. 214 refs., 105 figs., 26 tabs.

  7. A reliability and maintainability study of selected solar energy system components in the Solar in Federal Buildings Program: Final subcontract report

    SciTech Connect (OSTI)

    Logee, T.L.; Pakkala, P.A.; Pollock, E.O.; Raymond, M.G.

    1986-11-01T23:59:59.000Z

    The eight Solar in Federal Buildings Program (SFBP) solar energy systems described in this report were instrumented for automated data monitoring for system reliability and performance. Solar system pumps and solar system controllers were monitored for 3 to 9 months to provide data on failures, duty cycle, and system control setpoints. There was one pump failure, which was not enough to provide failure statistics. Controller failure rates were very high; 50% failed during the monitoring program. Controller drift was not as easily determined. The other most failure-prone component was the automatic flow control valves, 20% of which failed during the monitoring period. Only 0.7% of the collector panels were damaged by wind and freezing. The F-CHART model was used to predict failure-free performance; actual performance was compared to F-CHART predictions. It was concluded that failures that are corrected quickly have no significant effect on long-term performance.

  8. Build Less Code, Deliver More Science: An Experience Report on Composing Scientific Environments using Component-based and Commodity Software Platforms

    SciTech Connect (OSTI)

    Gorton, Ian; Liu, Yan; Lansing, Carina S.; Elsethagen, Todd O.; Kleese van Dam, Kerstin

    2013-07-17T23:59:59.000Z

    Modern scientific software is daunting in its diversity and complexity. From massively parallel simulations running on the world’s largest supercomputers, to visualizations and user support environments that manage ever growing complex data collections, the challenges for software engineers are plentiful. While high performance simulators are necessarily specialized codes to maximize performance on specific supercomputer architectures, we argue the vast majority of supporting infrastructure, data management and analysis tools can leverage commodity open source and component-based technologies. This approach can significantly drive down the effort and costs of building complex, collaborative scientific user environments, as well as increase their reliability and extensibility. In this paper we describe our experiences in creating an initial user environment for scientists involved in modeling the detailed effects of climate change on the environment of selected geographical regions. Our approach composes the user environment using the Velo scientific knowledge management platform and the MeDICi Integration Framework for scientific workflows. These established platforms leverage component-based technologies and extend commodity open source platforms with abstractions and capabilities that make them amenable for broad use in science. Using this approach we were able to deliver an operational user environment capable of running thousands of simulations in a 7 month period, and achieve significant software reuse.

  9. Components Interoperability through Mediating Connector Patterns

    E-Print Network [OSTI]

    Spalazzese, Romina; 10.4204/EPTCS.37.3

    2010-01-01T23:59:59.000Z

    A key objective for ubiquitous environments is to enable system interoperability between system's components that are highly heterogeneous. In particular, the challenge is to embed in the system architecture the necessary support to cope with behavioral diversity in order to allow components to coordinate and communicate. The continuously evolving environment further asks for an automated and on-the-fly approach. In this paper we present the design building blocks for the dynamic and on-the-fly interoperability between heterogeneous components. Specifically, we describe an Architectural Pattern called Mediating Connector, that is the key enabler for communication. In addition, we present a set of Basic Mediator Patterns, that describe the basic mismatches which can occur when components try to interact, and their corresponding solutions.

  10. Energy Information Handbook: Applications for Energy-Efficient Building Operations

    E-Print Network [OSTI]

    Granderson, Jessica

    2013-01-01T23:59:59.000Z

    component level. Building Automation System (BAS): A systemthe terms building automation system, building managementaddition, modern building automation systems (BAS) are able

  11. Key distributionKey distribution Key distribution, symmetric encryption

    E-Print Network [OSTI]

    Fisher, Michael

    COMP 522 Key distributionKey distribution COMP 522 Key distribution, symmetric encryption From in a secure way and must keep the key secure" · Important issue: how to distribute secret keys? COMP 522 Key distribution, manual delivery For two parties A and B: · A key could be created by A and delivered physically

  12. 1 | Building America eere.energy.gov DOE's Building America

    E-Print Network [OSTI]

    1 | Building America eere.energy.gov DOE's Building America Low-E Storm Window Adoption Program Working Group #12;2 | Building America eere.energy.gov Pacific Northwest National Laboratory · Katie Cort, Larson Manufacturing Company Key Staff #12;3 | Building America eere.energy.gov Problem · Windows account

  13. Indoor-Outdoor Air Leakage of Apartments and Commercial Buildings

    E-Print Network [OSTI]

    Price, P.N.

    2011-01-01T23:59:59.000Z

    Measured Airflows in a Multifamily Building," AirflowPerformance of Building Envelopes, Components, and Systems,APARTMENTS AND COMMERCIAL BUILDINGS Price, P.N. ; Shehabi,

  14. Performance Metrics for Commercial Buildings

    SciTech Connect (OSTI)

    Fowler, Kimberly M.; Wang, Na; Romero, Rachel L.; Deru, Michael P.

    2010-09-30T23:59:59.000Z

    Commercial building owners and operators have requested a standard set of key performance metrics to provide a systematic way to evaluate the performance of their buildings. The performance metrics included in this document provide standard metrics for the energy, water, operations and maintenance, indoor environmental quality, purchasing, waste and recycling and transportation impact of their building. The metrics can be used for comparative performance analysis between existing buildings and industry standards to clarify the impact of sustainably designed and operated buildings.

  15. Passive solar buildings

    SciTech Connect (OSTI)

    Balcomb, J.D. [ed.] [Solar Energy Research Inst., Golden, CO (United States)

    1992-10-01T23:59:59.000Z

    Developments in passive solar buildings that took place from the early 1970`s through 1989 are described. Much of the work covered was federally sponsored during the period 1975 through 1986. About half the volume is devoted to quantitative methods for modeling, simulation, and design analysis of passive buildings; the other half summarizes the quantitative results of testing and monitoring of models and buildings. The following are covered: building solar gain modeling, simulation analysis, simplified methods, materials and components, analytical results for specific systems, test modules, building integration, performance monitoring and results, and design tools. (MHR)

  16. Passive solar buildings

    SciTech Connect (OSTI)

    Balcomb, J.D. (ed.) (Solar Energy Research Inst., Golden, CO (United States))

    1992-01-01T23:59:59.000Z

    Developments in passive solar buildings that took place from the early 1970's through 1989 are described. Much of the work covered was federally sponsored during the period 1975 through 1986. About half the volume is devoted to quantitative methods for modeling, simulation, and design analysis of passive buildings; the other half summarizes the quantitative results of testing and monitoring of models and buildings. The following are covered: building solar gain modeling, simulation analysis, simplified methods, materials and components, analytical results for specific systems, test modules, building integration, performance monitoring and results, and design tools. (MHR)

  17. Green Buildings in Green Cities: Integrating Energy Efficiency into the Real Estate Industry

    E-Print Network [OSTI]

    Bardhan, Ashok; Kroll, Cynthia A.

    2011-01-01T23:59:59.000Z

    in Operation. Energy and Buildings. 43(11): 3106-3111.and Renewable Energy, Building Technologies Program, of theand Renewable Energy, Building Technologies Program. Key

  18. "Turn-Key" Open Source Software Solutions for Energy Management...

    Energy Savers [EERE]

    "Turn-Key" Open Source Software Solutions for Energy Management of Small to Medium Sized Buildings (DE-FOA-0000822) "Turn-Key" Open Source Software Solutions for Energy Management...

  19. Building Stones

    E-Print Network [OSTI]

    2012-01-01T23:59:59.000Z

    3). Photographs by the author. Building Stones, Harrell, UEEOxford Short Citation: Harrell, 2012, Building Stones. UEE.Harrell, James A. , 2012, Building Stones. In Willeke

  20. Analysis of the Chinese Market for Building Energy Efficiency

    SciTech Connect (OSTI)

    Yu, Sha; Evans, Meredydd; Shi, Qing

    2014-03-20T23:59:59.000Z

    China will account for about half of the new construction globally in the coming decade. Its floorspace doubled from 1996 to 2011, and Chinese rural buildings alone have as much floorspace as all of U.S. residential buildings. Building energy consumption has also grown, increasing by over 40% since 1990. To curb building energy demand, the Chinese government has launched a series of policies and programs. Combined, this growth in buildings and renovations, along with the policies to promote green buildings, are creating a large market for energy efficiency products and services. This report assesses the impact of China’s policies on building energy efficiency and on the market for energy efficiency in the future. The first chapter of this report introduces the trends in China, drawing on both historical analysis, and detailed modeling of the drivers behind changes in floorspace and building energy demand such as economic and population growth, urbanization, policy. The analysis describes the trends by region, building type and energy service. The second chapter discusses China’s policies to promote green buildings. China began developing building energy codes in the 1980s. Over time, the central government has increased the stringency of the code requirements and the extent of enforcement. The codes are mandatory in all new buildings and major renovations in China’s cities, and they have been a driving force behind the expansion of China’s markets for insulation, efficient windows, and other green building materials. China also has several other important policies to encourage efficient buildings, including the Three-Star Rating System (somewhat akin to LEED), financial incentives tied to efficiency, appliance standards, a phasing out of incandescent bulbs and promotion of efficient lighting, and several policies to encourage retrofits in existing buildings. In the third chapter, we take “deep dives” into the trends affecting key building components. This chapter examines insulation in walls and roofs; efficient windows and doors; heating, air conditioning and controls; and lighting. These markets have seen significant growth because of the strength of the construction sector but also the specific policies that require and promote efficient building components. At the same time, as requirements have become more stringent, there has been fierce competition, and quality has at time suffered, which in turn has created additional challenges. Next we examine existing buildings in chapter four. China has many Soviet-style, inefficient buildings built before stringent requirements for efficiency were more widely enforced. As a result, there are several specific market opportunities related to retrofits. These fall into two or three categories. First, China now has a code for retrofitting residential buildings in the north. Local governments have targets of the number of buildings they must retrofit each year, and they help finance the changes. The requirements focus on insulation, windows, and heat distribution. Second, the Chinese government recently decided to increase the scale of its retrofits of government and state-owned buildings. It hopes to achieve large scale changes through energy service contracts, which creates an opportunity for energy service companies. Third, there is also a small but growing trend to apply energy service contracts to large commercial and residential buildings. This report assesses the impacts of China’s policies on building energy efficiency. By examining the existing literature and interviewing stakeholders from the public, academic, and private sectors, the report seeks to offer an in-depth insights of the opportunities and barriers for major market segments related to building energy efficiency. The report also discusses trends in building energy use, policies promoting building energy efficiency, and energy performance contracting for public building retrofits.

  1. Key Research Results Achievement

    E-Print Network [OSTI]

    , such as: · Methods to significantly improve lighting power densities and building envelopes · Detailed

  2. Health Equity in a New Urbanist Environment: Land Use Planning and Community Capacity Building in Fresno, CA

    E-Print Network [OSTI]

    ZUK, MIRIAM ZOFITH

    2013-01-01T23:59:59.000Z

    Commission, Smart Growth Advocates, Building Healthycommunity capacity building to the Smart Growth agenda. Incapacity building as being key to advancing the Smart Growth

  3. Broken Information Feedback Loops Prevent Good Building Energy Performance—Integrated Technological and Sociological Fixes Are Needed

    E-Print Network [OSTI]

    Arens, Edward; Brown, Karl

    2012-01-01T23:59:59.000Z

    available from building automation systems (i.e. , controls)information. Building automation systems have emphasizedfrom typical building automation systems—a key feature for

  4. FORESTRY BUILDING: BUILDING EMERGENCY PLAN

    E-Print Network [OSTI]

    FORESTRY BUILDING: BUILDING EMERGENCY PLAN Date Adopted: August 18, 2009 Date Revised June 17, 2013 Prepared By: Diana Evans and Jennifer Meyer #12;PURDUE UNIVERSITY BUILDING EMERGENCY PLAN VERSION 3 2 Table Suspension or Campus Closure SECTION 3: BUILDING INFORMATION 3.1 Building Deputy/Alternate Building Deputy

  5. BUILDING NAME HEYDON-LAURENCE BUILDING

    E-Print Network [OSTI]

    Viglas, Anastasios

    BUILDING NAME HEYDON-LAURENCE BUILDING PHARMACY AND BANK BUILDING JOHN WOOLEY BUILDING OLD TEARCHER'S BUILDING PHYSICS BUILDING BAXTER'S LODGE INSTITUTE BUILDING CONSERVATION WORKS R.D.WATT BUILDING MACLEAY BUILDING THE QUARANGLE BADHAM BUILDING J.D. STEWART BUILDING BLACKBURN BUILDING MADSEN BUILDING STORE

  6. G54SIM Lab 02 Tutorial: Laptop Simulation Build a simulation model of a laptop operation. When the laptop is on and the user is working, i.e. is pressing the keyboard keys and moving the mouse, the laptop

    E-Print Network [OSTI]

    Aickelin, Uwe

    the battery usage. To wake the laptop up you need to press the power button. In any of the three states On {EnergyConsumption} [EnergyConsumption=: Laptop.isStateActive(On)?5 : Laptop.isStateActive(ScreenOff)?31 G54SIM Lab 02 Tutorial: Laptop Simulation Task Build a simulation model of a laptop operation

  7. Building America Case Study: Excavationless Exterior-Side Foundation...

    Broader source: Energy.gov (indexed) [DOE]

    Homeworks, urbanhomeworks.org BASF, basf.us American Environmental, LLC NorthernSTAR Building America Partnership Building Component: Foundation insulation Application: Retrofit;...

  8. TR-IIS-07-007 Component Model for SISARL

    E-Print Network [OSTI]

    Chen, Sheng-Wei

    . It is the basis of component-based approach to building families of smart devices and systems that enhance life. It is the basis of component-based approach to building families of smart devices and systems that enhance life of component-based approach to constructing systems from configurable building blocks with well

  9. Around Buildings

    E-Print Network [OSTI]

    Treib, Marc

    1987-01-01T23:59:59.000Z

    Around Buildings W h y startw i t h buildings and w o r k o u t wa r d ? For one, buildings are difficult t o a v o i d these

  10. BUILDING INSPECTION Building, Infrastructure, Transportation

    E-Print Network [OSTI]

    BUILDING INSPECTION Building, Infrastructure, Transportation City of Redwood City 1017 Middlefield Sacramento, Ca 95814-5514 Re: Green Building Ordinance and the Building Energy Efficiency Standards Per of Redwood City enforce the current Title 24 Building Energy Efficiency Standards as part

  11. Public Key Cryptography and Key Management

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2000-02-15T23:59:59.000Z

    The use and management of certificate-based public key cryptography for the Department of Energy (DOE) requires the establishment of a public key infrastructure (PKI). This chapter defines the policy related to roles, requirements, and responsibilities for establishing and maintaining a DOE PKI and the documentation necessary to ensure that all certificates are managed in a manner that maintains the overall trust required to support a viable PKI. Canceled by DOE N 251.112.

  12. Key Milestones/Outlook

    Broader source: Energy.gov [DOE]

    Key Milestones/Outlook per the Department of Energy 2015 Congressional Budget Request, Environmental Management, March 2014

  13. Software Platforms for Smart Building Ecosystems: Understanding the

    E-Print Network [OSTI]

    Software Platforms for Smart Building Ecosystems: Understanding the Key Architectural-ready software platform for the smart building domain. We analyzed the type of contributors that may exist in a smart building ecosystem, the quality attributes that those roles are concerned with, and the key

  14. Building technologies

    SciTech Connect (OSTI)

    Jackson, Roderick

    2014-07-14T23:59:59.000Z

    After growing up on construction sites, Roderick Jackson is now helping to make buildings nationwide far more energy efficient.

  15. Building technologies

    ScienceCinema (OSTI)

    Jackson, Roderick

    2014-07-15T23:59:59.000Z

    After growing up on construction sites, Roderick Jackson is now helping to make buildings nationwide far more energy efficient.

  16. Quantum dense key distribution

    SciTech Connect (OSTI)

    Degiovanni, I.P.; Ruo Berchera, I.; Castelletto, S.; Rastello, M.L.; Bovino, F.A.; Colla, A.M.; Castagnoli, G. [Istituto Elettrotecnico Nazionale G. Ferraris, Strada delle Cacce 91, 10135 Torino (Italy); ELSAG SpA, Via Puccini 2, 16154, Genova (Italy)

    2004-03-01T23:59:59.000Z

    This paper proposes a protocol for quantum dense key distribution. This protocol embeds the benefits of a quantum dense coding and a quantum key distribution and is able to generate shared secret keys four times more efficiently than the Bennet-Brassard 1984 protocol. We hereinafter prove the security of this scheme against individual eavesdropping attacks, and we present preliminary experimental results, showing its feasibility.

  17. Key Events Timeline

    Broader source: Energy.gov [DOE]

    This document lists key events beginning with the April 20 fire on the Deepwater Horizon through July 28th. Updated July 28, 2010.

  18. Beardmore Building

    High Performance Buildings Database

    Priest River, ID Originally built in 1922 by Charles Beardmore, the building housed offices, mercantile shops, a ballroom and a theater. After decades of neglect under outside ownership, Brian Runberg, an architect and great-grandson of Charles Beardmore, purchased the building in 2006 and began an extensive whole building historic restoration.

  19. Building America Residential Buildings Energy Efficiency Meeting...

    Energy Savers [EERE]

    Building America Residential Buildings Energy Efficiency Meeting: July 2010 Building America Residential Buildings Energy Efficiency Meeting: July 2010 On this page, you may link...

  20. Key Request (Last) (First)

    E-Print Network [OSTI]

    Carrington, Emily

    will be accessing. For Johnson Hall exterior door access bring a copy of this form to the Earth & Space SciencesKey Request Form Name: (Last) (First) Contact Info Keys Cardswipe UW Email: Hitchcock Exterior Door Room:_________ Room:_________ Johnson Room:_________ Room:_________ Kincaid Exterior Door Room

  1. Building Energy Monitoring and Analysis

    SciTech Connect (OSTI)

    Hong, Tianzhen; Feng, Wei; Lu, Alison; Xia, Jianjun; Yang, Le; Shen, Qi; Im, Piljae; Bhandari, Mahabir

    2013-06-01T23:59:59.000Z

    This project aimed to develop a standard methodology for building energy data definition, collection, presentation, and analysis; apply the developed methods to a standardized energy monitoring platform, including hardware and software, to collect and analyze building energy use data; and compile offline statistical data and online real-time data in both countries for fully understanding the current status of building energy use. This helps decode the driving forces behind the discrepancy of building energy use between the two countries; identify gaps and deficiencies of current building energy monitoring, data collection, and analysis; and create knowledge and tools to collect and analyze good building energy data to provide valuable and actionable information for key stakeholders.

  2. Optical key system

    DOE Patents [OSTI]

    Hagans, Karla G. (Livermore, CA); Clough, Robert E. (Danville, CA)

    2000-01-01T23:59:59.000Z

    An optical key system comprises a battery-operated optical key and an isolated lock that derives both its operating power and unlock signals from the correct optical key. A light emitting diode or laser diode is included within the optical key and is connected to transmit a bit-serial password. The key user physically enters either the code-to-transmit directly, or an index to a pseudorandom number code, in the key. Such person identification numbers can be retained permanently, or ephemeral. When a send button is pressed, the key transmits a beam of light modulated with the password information. The modulated beam of light is received by a corresponding optical lock with a photovoltaic cell that produces enough power from the beam of light to operate a password-screen digital logic. In one application, an acceptable password allows a two watt power laser diode to pump ignition and timing information over a fiberoptic cable into a sealed engine compartment. The receipt of a good password allows the fuel pump, spark, and starter systems to each operate. Therefore, bypassing the lock mechanism as is now routine with automobile thieves is pointless because the engine is so thoroughly disabled.

  3. Ready to Retrofit: The Process of Project Team Selection, Building

    E-Print Network [OSTI]

    , and Financing Commercial Building Energy Retrofit Projects Mark D. Sanders, Kristen Parrish, Paul Mathew for the Commercial Buildings Partnership (CBP) program, sponsored by the U.S. Department of Energy's Building a process for three key activities for the building owner in preparing to retrofit existing commercial

  4. Improved Building Energy Consumption with the Help of Modern ICT

    E-Print Network [OSTI]

    Pietilainen, J.

    2003-01-01T23:59:59.000Z

    Kyoto process and the global combat against climate change will require more intensive energy saving efforts especially in all developed countries. Key for the success in building sector is the energy efficiency of the existing building stock...

  5. Building Stones

    E-Print Network [OSTI]

    2012-01-01T23:59:59.000Z

    was no good source of local building stone, rock was usuallyrock-cut shrines and especially tombs, and these are the sources

  6. Research on Commercial Patterns of China Existing Building Energy Retrofit Based on Energy Management Contract 

    E-Print Network [OSTI]

    Han, Z.; Liu, C.; Sun, J.

    2006-01-01T23:59:59.000Z

    Existing building energy retrofit is one of the keys of building energy efficiency in China. According to experience in developed countries, implementation of energy management contract (EMC) is crucial to promote existing building energy retrofit...

  7. Text-Alternative Version of Building America Webinar: Research for Real-World Results

    Broader source: Energy.gov [DOE]

    This webinar, held on Dec. 17, 2014, featured Eric Werling, Building America Program Coordinator, providing an overview of key Building America accomplishments, current research focus areas, and future strategies for advancing market adoption of energy efficient building technologies and practices.

  8. Research on Commercial Patterns of China Existing Building Energy Retrofit Based on Energy Management Contract

    E-Print Network [OSTI]

    Han, Z.; Liu, C.; Sun, J.

    2006-01-01T23:59:59.000Z

    Existing building energy retrofit is one of the keys of building energy efficiency in China. According to experience in developed countries, implementation of energy management contract (EMC) is crucial to promote existing building energy retrofit...

  9. High Heat Flux Components Program

    SciTech Connect (OSTI)

    Whitley, J.B.

    1983-01-01T23:59:59.000Z

    Purpose is the development of the technologies necessary to design, build and operate high heat flux components such as actively cooled limiters, divertor collector plates, R.F. antennas, mirror end cells, mirror halo collectors, direct convertor collectors, and neutral beam dumps. These components require an integrated design that considers the plasma-materials interaction (PMI) issues, heat removal problems and materials issues (including possible low Z coatings and claddings). As a general definition, high heat flux components see heat fluxes ranging from 1 to 100 MW/m/sup 2/. Suitable materials include copper and copper alloys.

  10. Building America Webinar: Multifamily Ventilation Strategies and Compartmentalization Requirements

    Broader source: Energy.gov [DOE]

    This Building America webinar, held on Sept. 24, 2014, focused on key challenges in multifamily ventilation and strategies to address these challenges.

  11. Better Buildings

    E-Print Network [OSTI]

    Neukomm, M.

    2012-01-01T23:59:59.000Z

    efficiency as top priority energy resource Revolutionary change in market Robust energy efficiency industry Prime the market for new technology Better Buildings Challenge Goals Make commercial & industrial buildings 20% more efficient by 2020... opportunities for energy efficiency 2 Great opportunities in the residential, commercial and industrial sectors 20% + savings is average Other benefits: Jobs, Environment, Competitiveness But persistent barriers exist?? ?Energy efficiency...

  12. Building Energy Monitoring and Analysis

    SciTech Connect (OSTI)

    Hong, Tianzhen; Feng, Wei; Lu, Alison; Xia, Jianjun; Yang, Le; Shen, Qi; Im, Piljae; Bhandari, Mahabir

    2013-06-01T23:59:59.000Z

    U.S. and China are the world’s top two economics. Together they consumed one-third of the world’s primary energy. It is an unprecedented opportunity and challenge for governments, researchers and industries in both countries to join together to address energy issues and global climate change. Such joint collaboration has huge potential in creating new jobs in energy technologies and services. Buildings in the US and China consumed about 40% and 25% of the primary energy in both countries in 2010 respectively. Worldwide, the building sector is the largest contributor to the greenhouse gas emission. Better understanding and improving the energy performance of buildings is a critical step towards sustainable development and mitigation of global climate change. This project aimed to develop a standard methodology for building energy data definition, collection, presentation, and analysis; apply the developed methods to a standardized energy monitoring platform, including hardware and software, to collect and analyze building energy use data; and compile offline statistical data and online real-time data in both countries for fully understanding the current status of building energy use. This helps decode the driving forces behind the discrepancy of building energy use between the two countries; identify gaps and deficiencies of current building energy monitoring, data collection, and analysis; and create knowledge and tools to collect and analyze good building energy data to provide valuable and actionable information for key stakeholders.

  13. Building America Webinar: Ventilation in Multifamily Buildings...

    Energy Savers [EERE]

    Ventilation in Multifamily Buildings Building America Webinar: Ventilation in Multifamily Buildings This webinar was presented by research team Consortium for Advanced Residential...

  14. Building America Expert Meeting: Transforming Existing Buildings...

    Energy Savers [EERE]

    Transforming Existing Buildings through New Media--An Idea Exchange Building America Expert Meeting: Transforming Existing Buildings through New Media--An Idea Exchange This report...

  15. Building America Expert Meeting: Key Innovations for Adding Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy China U.S. Department ofJune 2,The Big Green372 Roomfor HumanitySeparationofEfficiency to

  16. Building MRV Standards and Capacity in Key Countries | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:EzfeedflagBiomassSustainable andBucoda, Washington: Energy ResourcesBuffalo,Buhler,

  17. Analysis of Building Envelope Construction in 2003 CBECS

    SciTech Connect (OSTI)

    Winiarski, David W.; Halverson, Mark A.; Jiang, Wei

    2007-06-01T23:59:59.000Z

    The purpose of this analysis is to determine "typical" building envelope characteristics for buildings built after 1980. We address three envelope components in this paper - roofs, walls, and window area. These typical building envelope characteristics were used in the development of DOE’s Reference Buildings .

  18. Cryptographic Key Management System

    SciTech Connect (OSTI)

    No, author

    2014-02-21T23:59:59.000Z

    This report summarizes the outcome of U.S. Department of Energy (DOE) contract DE-OE0000543, requesting the design of a Cryptographic Key Management System (CKMS) for the secure management of cryptographic keys for the energy sector infrastructure. Prime contractor Sypris Electronics, in collaboration with Oak Ridge National Laboratories (ORNL), Electric Power Research Institute (EPRI), Valicore Technologies, and Purdue University's Center for Education and Research in Information Assurance and Security (CERIAS) and Smart Meter Integration Laboratory (SMIL), has designed, developed and evaluated the CKMS solution. We provide an overview of the project in Section 3, review the core contributions of all contractors in Section 4, and discuss bene#12;ts to the DOE in Section 5. In Section 6 we describe the technical construction of the CKMS solution, and review its key contributions in Section 6.9. Section 7 describes the evaluation and demonstration of the CKMS solution in different environments. We summarize the key project objectives in Section 8, list publications resulting from the project in Section 9, and conclude with a discussion on commercialization in Section 10 and future work in Section 11.

  19. Building Science

    Broader source: Energy.gov [DOE]

    This presentation was given at the Summer 2012 DOE Building America meeting on July 25, 2012, and addressed the question ŤHow do we first do no harm with high-r enclosures??

  20. Building debris

    E-Print Network [OSTI]

    Dahmen, Joseph (Joseph F. D.)

    2006-01-01T23:59:59.000Z

    This thesis relates architectural practices to intelligent use of resources and the reuse of derelict spaces. The initial investigation of rammed earth as a building material is followed by site-specific operations at the ...

  1. Building Stones

    E-Print Network [OSTI]

    2012-01-01T23:59:59.000Z

    1992 Are the pyramids of Egypt built of poured concreteel-Anba’ut, Red Sea coast, Egypt. Marmora 6, pp. 45 - 56.building stones of ancient Egypt are those relatively soft,

  2. Healthy buildings

    SciTech Connect (OSTI)

    Not Available

    1991-01-01T23:59:59.000Z

    This book is covered under the following headings: Healthy building strategies/productivity, Energy and design issues, Ventilation, Contaminants, Thermal, airflow, and humidity issues, School-related issues, Sources and sinks, Filtering, Operation and maintenance.

  3. Healthy buildings

    SciTech Connect (OSTI)

    Geshwiler, M.; Montgomery, L.; Moran, M. (eds.)

    1991-01-01T23:59:59.000Z

    This proceedings is of the Indoor Air Quality (IAQ) Conference held September 4--8, 1991 in Washington, D.C. Entitled the IAQ 91, Healthy Buildings,'' the major topics of discussion included: healthy building strategies/productivity; energy and design issues; ventilation; contaminants; thermal, airflow, and humidity issues; school-related issues; sources and sinks; filtering; and operation and maintenance. For these conference proceedings, individual papers are processed separately for input into the Energy Data Base. (BN)

  4. Archive Reference Buildings by Building Type: Supermarket

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the reference buildings for new construction commercial buildings, organized by building type and location. A summary of building types and climate zones is...

  5. Archive Reference Buildings by Building Type: Warehouse

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the reference buildings for new construction commercial buildings, organized by building type and location. A summary of building types and climate zones is...

  6. Texas Tech University's New Petroleum Engineering Building

    E-Print Network [OSTI]

    Gelfond, Michael

    Texas Tech University's New Petroleum Engineering Building: A New Era in Petroleum Engineering Production and Operations Education Summer 2012 Engineering Our Future Texas Tech University - Edward E of Regents has approved the construction of a new petroleum engineering building on the Engineering Key

  7. Integrated Building Management System (IBMS)

    SciTech Connect (OSTI)

    Anita Lewis

    2012-07-01T23:59:59.000Z

    This project provides a combination of software and services that more easily and cost-effectively help to achieve optimized building performance and energy efficiency. Featuring an open-platform, cloud- hosted application suite and an intuitive user experience, this solution simplifies a traditionally very complex process by collecting data from disparate building systems and creating a single, integrated view of building and system performance. The Fault Detection and Diagnostics algorithms developed within the IBMS have been designed and tested as an integrated component of the control algorithms running the equipment being monitored. The algorithms identify the normal control behaviors of the equipment without interfering with the equipment control sequences. The algorithms also work without interfering with any cooperative control sequences operating between different pieces of equipment or building systems. In this manner the FDD algorithms create an integrated building management system.

  8. Big data : evolution, components, challenges and opportunities

    E-Print Network [OSTI]

    Zarate Santovena, Alejandro

    2013-01-01T23:59:59.000Z

    This work reviews the evolution and current state of the "Big Data" industry, and to understand the key components, challenges and opportunities of Big Data and analytics face in today business environment, this is analyzed ...

  9. Building Blocks for Mobile Games : A multiplayer framework for App Inventor for Android

    E-Print Network [OSTI]

    Magnuson, Bill

    2010-01-01T23:59:59.000Z

    Building Blocks for Mobile Games is a client-server multiplayer game-building-framework for the App Inventor for Android platform. The Building Blocks for Mobile Games multiplayer framework includes an App Inventor component ...

  10. CONVERGING REDUNDANT SENSOR NETWORK INFORMATION FOR IMPROVED BUILDING CONTROL

    SciTech Connect (OSTI)

    Dale K. Tiller; Gregor P. Henze

    2004-11-01T23:59:59.000Z

    Knowing how many people occupy a building, and where they are located, is a key component of building energy management and security. Commercial, industrial and residential buildings often incorporate systems used to determine occupancy, however, current sensor technology and control algorithms limit the effectiveness of both energy management and security systems. This topical report describes results from the first phase of a project to design, implement, validate, and prototype new technologies to monitor occupancy, control indoor environment services, and promote security in buildings. Phase I of the project focused on instrumentation and data collection. In this project phase a new occupancy detection system was developed, commissioned and installed in a sample of private offices and open-plan office workstations. Data acquisition systems were developed and deployed to collect data on space occupancy profiles. Analysis tools based on Bayesian probability theory were applied to the occupancy data generated by the sensor network. The inference of primary importance is a probability distribution over the number of occupants and their locations in a building, given past and present sensor measurements. Inferences were computed for occupancy and its temporal persistence in individual offices as well as the persistence of sensor status. The raw sensor data were also used to calibrate the sensor belief network, including the occupancy transition matrix used in the Markov model, sensor sensitivity, and sensor failure models. This study shows that the belief network framework can be applied to the analysis of data streams from sensor networks, offering significant benefits to building operation compared to current practice.

  11. Bioenergy Key Publications

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: The FutureCommentsEnergyand SustainedBio-OilBioenergy 2015 AgendaBioenergyKEY

  12. NETL: Key Staff

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated Codes |IsLoveReferenceAgenda Workshop AgendaGraphic of aEnergy SystemsKey

  13. NSR Key Number Retrieval

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated CodesTransparency VisitSilver Toyota PriusNSR Key Number Retrieval Pease

  14. Building Interoperability

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: Theof Energy FutureDepartment of Energy Building Energy-EfficientBuilding

  15. Building Interoperability

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: Theof Energy FutureDepartment of Energy Building Energy-EfficientBuilding

  16. Advanced Technologies and Practices - Building America Top Innovations...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    in specific technologies and construction practices that improve the building envelope; heating, ventilation, and air conditioning (HVAC); water heating components; and indoor...

  17. Better Buildings Program San Jose - Serving Moderate Income Residents...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Program San Jose - Serving Moderate Income Residents Better Buildings Program San Jose - Serving Moderate Income Residents Provides an overview of the program components and goals,...

  18. Key-shift transmission

    SciTech Connect (OSTI)

    Nemoto, S.

    1989-03-07T23:59:59.000Z

    A key-shift transmission is described, characterized by the speed-change shaft being divided into a pair of trough-shaped shaft halves each having an arched inner surface which defines a part of a cylindrical bore extending axially through the speed-change shaft thereby the shaft being formed into a hollow shaft, and by each of the shaft halves including a pair of flattened end surfaces which extend axially of each shaft half at both sides of the inner surface, one of the end surfaces having thereon an axially elongated projection and the other of the end surfaces having herein an axially elongated recess of a depth smaller than the height of the projection. The pair of shaft halves are engaged to each other co-rotatably by fitting the projections of the respective shaft halves into the recesses of the respective shaft halves so as to form in an outer surface of the speed-change shaft a pair of elongated axial grooves which are located radially outwardly of the elongated projections of the respective shaft halves and between the flattened end surfaces of the respective shaft halves. A pair of the shift keys are disposed within the pair of elongated axial grooves.

  19. Key recycling in authentication

    E-Print Network [OSTI]

    Christopher Portmann

    2014-09-29T23:59:59.000Z

    In their seminal work on authentication, Wegman and Carter propose that to authenticate multiple messages, it is sufficient to reuse the same hash function as long as each tag is encrypted with a one-time pad. They argue that because the one-time pad is perfectly hiding, the hash function used remains completely unknown to the adversary. Since their proof is not composable, we revisit it using a composable security framework. It turns out that the above argument is insufficient: if the adversary learns whether a corrupted message was accepted or rejected, information about the hash function is leaked, and after a bounded finite amount of rounds it is completely known. We show however that this leak is very small: Wegman and Carter's protocol is still $\\epsilon$-secure, if $\\epsilon$-almost strongly universal$_2$ hash functions are used. This implies that the secret key corresponding to the choice of hash function can be reused in the next round of authentication without any additional error than this $\\epsilon$. We also show that if the players have a mild form of synchronization, namely that the receiver knows when a message should be received, the key can be recycled for any arbitrary task, not only new rounds of authentication.

  20. A Data and Knowledge Management System for Intelligent Buildings

    E-Print Network [OSTI]

    Hong, J.; Chen, Z.; Li, H.; Xu, Q.

    2006-01-01T23:59:59.000Z

    words: Intelligent building; Assessment; Methodology; Information system 1. INTRODUCTION It is the development and application of modern technologies in the areas of information, communication, materials, and machinery in the construction.... According to our literature review [12], key technologies that support IBs include sustainable architecture, building structure control, building facility control, computer and network, information and communication, safety and security control...

  1. Photogrammetry Assisted Rapid Measurement of Earthquake-Induced Building Damage

    E-Print Network [OSTI]

    Kamat, Vineet R.

    Photogrammetry Assisted Rapid Measurement of Earthquake-Induced Building Damage Fei Dai, PhD Hong for rapidly measuring structural damage induced in tall buildings by seismic events such as earthquakes) sustained at key floors along the edge of a damaged building. The measured drift can then be used to compute

  2. Concentrating Solar Power �¢���� Central Receiver Panel Component Fabrication and Testing FINAL REPORT

    SciTech Connect (OSTI)

    McDowell, Michael W [Pratt & Whitney Rocketdyne; Miner, Kris [Pratt & Whitney Rocketdyne

    2013-03-30T23:59:59.000Z

    The objective of this project is to complete a design of an advanced concentrated solar panel and demonstrate the manufacturability of key components. Then confirm the operation of the key components under prototypic solar flux conditions. This work is an important step in reducing the levelized cost of energy (LCOE) from a central receiver solar power plant. The key technical risk to building larger power towers is building the larger receiver systems. Therefore, this proposed technology project includes the design of an advanced molten salt prototypic sub-scale receiver panel that can be utilized into a large receiver system. Then complete the fabrication and testing of key components of the receive design that will be used to validate the design. This project shall have a significant impact on solar thermal power plant design. Receiver panels of suitable size for utility scale plants are a key element to a solar power tower plant. Many subtle and complex manufacturing processes are involved in producing a reliable, robust receiver panel. Given the substantial size difference between receiver panels manufactured in the past and those needed for large plant designs, the manufacture and demonstration on prototype receiver panel components with representative features of a full-sized panel will be important to improving the build process for commercial success. Given the thermal flux limitations of the test facility, the panel components cannot be rendered full size. Significance changes occurred in the projects technical strategies from project initiation to the accomplishments described herein. The initial strategy was to define cost improvements for the receiver, design and build a scale prototype receiver and test, on sun, with a molten salt heat transport system. DOE had committed to constructing a molten salt heat transport loop to support receiver testing at the top of the NSTTF tower. Because of funding constraints this did not happen. A subsequent plan to test scale prototype receiver, off sun but at temperature, at a molten salt loop at ground level adjacent to the tower also had to be abandoned. Thus, no test facility existed for a molten salt receiver test. As a result, PWR completed the prototype receiver design and then fabricated key components for testing instead of fabricating the complete prototype receiver. A number of innovative design ideas have been developed. Key features of the receiver panel have been identified. This evaluation includes input from Solar 2, personal experience of people working on these programs and meetings with Sandia. Key components of the receiver design and key processes used to fabricate a receiver have been selected for further evaluation. The Test Plan, Concentrated Solar Power Receiver In Cooperation with the Department of Energy and Sandia National Laboratory was written to define the scope of the testing to be completed as well as to provide details related to the hardware, instrumentation, and data acquisition. The document contains a list of test objectives, a test matrix, and an associated test box showing the operating points to be tested. Test Objectives: 1. Demonstrate low-cost manufacturability 2. Demonstrate robustness of two different tube base materials 3. Collect temperature data during on sun operation 4. Demonstrate long term repeated daily operation of heat shields 5. Complete pinhole tube weld repairs 6. Anchor thermal models This report discusses the tests performed, the results, and implications for design improvements and LCOE reduction.

  3. Building English Explanations from Function Descriptions

    E-Print Network [OSTI]

    Roberts, Bruce

    An explanatory component is an important ingredient in any complex AI system. A simple generative scheme to build descriptive phrases from Lisp function calls can produce respectable explanations if explanation generators ...

  4. Home | Better Buildings Workforce

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Better Buildings Logo EERE Home | Programs & Offices | Consumer Information Search form Search Search Better Buildings Logo Connect with Us LinkedIn Twitter Better Buildings...

  5. Optimal building-integrated photovoltaic applications

    SciTech Connect (OSTI)

    Kiss, G.; Kinkead, J. [Kiss and Co. Architects, New York, NY (United States)

    1995-11-01T23:59:59.000Z

    Photovoltaic (solar electric) modules are clean, safe and efficient devices that have long been considered a logical material for use in buildings. Recent technological advances have made PVs suitable for direct integration into building construction. PV module size, cost, appearance and reliability have advanced to the point where they can function within the architectural parameters of conventional building materials. A building essentially provides free land and structural support for a PV module, and the module in turn displaces standard building components. This report identifies the highest-value applications for PVs in buildings. These systems should be the first markets for BIPV products in the commercial buildings, and should remain an important high-end market for the foreseeable future.

  6. Putting cancer in focusPathologists key to picking the

    E-Print Network [OSTI]

    Eichman, Brandt F.

    Putting cancer in focusPathologists key to picking the right path to a cure momentum IN THIS ISSUE without cancer. #12;EDITOR Heather Newman DESIGN Diana Duren DIRECTOR OF PUBLICATIONS Wayne Wood ASSOCIATE / Photo Researchers, Inc. EDITORIAL OFFICE Vanderbilt-Ingram Cancer Center 691 Preston Building Nashville

  7. Page 1 of 4 Creating and Submitting a Key Request

    E-Print Network [OSTI]

    Howitt, Ivan

    of employees. Enter search criteria in the search fields available and select the down red arrow to filter the terms. #12;Page 3 of 4 13. On the Key Request Form - Room List windowpane, select Add New. 14 use the Select Drawing button after entering the building and floor to display the floor plan

  8. Building technolgies program. 1994 annual report

    SciTech Connect (OSTI)

    Selkowitz, S.E.

    1995-04-01T23:59:59.000Z

    The objective of the Building Technologies program is to assist the U.S. building industry in achieving substantial reductions in building sector energy use and associated greenhouse gas emissions while improving comfort, amenity, health, and productivity in the building sector. We have focused our past efforts on two major building systems, windows and lighting, and on the simulation tools needed by researchers and designers to integrate the full range of energy efficiency solutions into achievable, cost-effective design solutions for new and existing buildings. In addition, we are now taking more of an integrated systems and life cycle perspective to create cost-effective solutions for more energy efficient, comfortable, and productive work and living environments. More than 30% of all energy use in buildings is attributable to two sources: windows and lighting. Together they account for annual consumer energy expenditures of more than $50 billion. Each affects not only energy use by other major building systems, but also comfort and productivity-factors that influence building economics far more than does direct energy consumption alone. Windows play a unique role in the building envelope, physically separating the conditioned space from the world outside without sacrificing vital visual contact. Throughout every space in a building, lighting systems facilitate a variety of tasks associated with a wide range of visual requirements while defining the luminous qualities of the indoor environment. Window and lighting systems are thus essential components of any comprehensive building science program.

  9. Building Energy Optimization Analysis Method (BEopt) - Building...

    Energy Savers [EERE]

    about BEopt. See an example of a Building America project that used BEopt. Find more case studies of Building America projects across the country that incorporate BEopt when...

  10. Multi-criteria decision-making process for buildings

    SciTech Connect (OSTI)

    Balcomb, J. D.; Curtner, A.

    2000-06-20T23:59:59.000Z

    This paper focuses on a process designed to facilitate two key decisions early in the building design process that are critical to a building's sustainability. As vital decisions are made during the building's design, the process and accompanying tools assist the design team in prioritizing their goals, setting performance targets, and evaluating design options to ensure that the most important issues affecting building sustainability are considered.

  11. Advanced Energy Retrofit Guide Retail Buildings

    SciTech Connect (OSTI)

    Liu, Guopeng; Liu, Bing; Zhang, Jian; Wang, Weimin; Athalye, Rahul A.; Moser, Dave; Crowe, Eliot; Bengtson, Nick; Effinger, Mark; Webster, Lia; Hatten, Mike

    2011-09-19T23:59:59.000Z

    The Advanced Energy Retrofit Guide for Retail Buildings is a component of the Department of Energy’s Advanced Energy Retrofit Guides for Existing Buildings series. The aim of the guides is to facilitate a rapid escalation in the number of energy efficiency projects in existing buildings and to enhance the quality and depth of those projects. By presenting general project planning guidance as well as financial payback metrics for the most common energy efficiency measures, these guides provide a practical roadmap to effectively planning and implementing performance improvements for existing buildings.

  12. Advanced Energy Retrofit Guide Office Buildings

    SciTech Connect (OSTI)

    Liu, Guopeng; Liu, Bing; Wang, Weimin; Zhang, Jian; Athalye, Rahul A.; Moser, Dave; Crowe, Eliot; Bengtson, Nick; Effinger, Mark; Webster, Lia; Hatten, Mike

    2011-09-27T23:59:59.000Z

    The Advanced Energy Retrofit Guide for Office Buildings is a component of the Department of Energy’s Advanced Energy Retrofit Guides for Existing Buildings series. The aim of the guides is to facilitate a rapid escalation in the number of energy efficiency projects in existing buildings and to enhance the quality and depth of those projects. By presenting general project planning guidance as well as financial payback metrics for the most common energy efficiency measures, these guides provide a practical roadmap to effectively planning and implementing performance improvements for existing buildings.

  13. Public key infrastructure for DOE security research

    SciTech Connect (OSTI)

    Aiken, R.; Foster, I.; Johnston, W.E. [and others

    1997-06-01T23:59:59.000Z

    This document summarizes the Department of Energy`s Second Joint Energy Research/Defence Programs Security Research Workshop. The workshop, built on the results of the first Joint Workshop which reviewed security requirements represented in a range of mission-critical ER and DP applications, discussed commonalties and differences in ER/DP requirements and approaches, and identified an integrated common set of security research priorities. One significant conclusion of the first workshop was that progress in a broad spectrum of DOE-relevant security problems and applications could best be addressed through public-key cryptography based systems, and therefore depended upon the existence of a robust, broadly deployed public-key infrastructure. Hence, public-key infrastructure ({open_quotes}PKI{close_quotes}) was adopted as a primary focus for the second workshop. The Second Joint Workshop covered a range of DOE security research and deployment efforts, as well as summaries of the state of the art in various areas relating to public-key technologies. Key findings were that a broad range of DOE applications can benefit from security architectures and technologies built on a robust, flexible, widely deployed public-key infrastructure; that there exists a collection of specific requirements for missing or undeveloped PKI functionality, together with a preliminary assessment of how these requirements can be met; that, while commercial developments can be expected to provide many relevant security technologies, there are important capabilities that commercial developments will not address, due to the unique scale, performance, diversity, distributed nature, and sensitivity of DOE applications; that DOE should encourage and support research activities intended to increase understanding of security technology requirements, and to develop critical components not forthcoming from other sources in a timely manner.

  14. Industrial Buildings

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122 40 Building FloorspaceThousandWithdrawals0.0 0.0Decade4Year114,937

  15. 3Building a Business Building a Business

    E-Print Network [OSTI]

    Arnold, Jonathan

    15 3Building a Business Building a Business This section provides direction on the kinds. If you contemplate building a "garage- based" company to sell a product into a niche market, you should-ups conjure up images of future wealth, of building the next Amgen or Microsoft, of launching what will become

  16. Connector device for building integrated photovoltaic device

    SciTech Connect (OSTI)

    Keenihan, James R.; Langmaid, Joseph A.; Eurich, Gerald K.; Lesniak, Michael J.; Mazor, Michael H.; Cleereman, Robert J.; Gaston, Ryan S.

    2014-06-03T23:59:59.000Z

    The present invention is premised upon a connector device and method that can more easily electrically connect a plurality of PV devices or photovoltaic system components and/or locate these devices/components upon a building structure. It also may optionally provide some additional sub-components (e.g. at least one bypass diode and/or an indicator means) and may enhance the serviceability of the device.

  17. Diversity & Flexibility Key to Sustainability

    Broader source: Energy.gov [DOE]

    Plenary V: Biofuels and Sustainability: Acknowledging Challenges and Confronting MisconceptionsDiversity & Flexibility Key to SustainabilityDavid Babson, Senior Fuels Engineer, Union of...

  18. Facilitating performance predictions using software components

    E-Print Network [OSTI]

    Becker, Steffen

    Reussner 1. Introduction Composing software systems of independent building blocks is the central vision based on the properties of its components. In civil and electrical engineering, the early assessment, performance is often mainly considered at the end of the development cycle when the complete system can

  19. Nuclear component horizontal seismic restraint

    DOE Patents [OSTI]

    Snyder, Glenn J. (Lynchburg, VA)

    1988-01-01T23:59:59.000Z

    A nuclear component horizontal seismic restraint. Small gaps limit horizontal displacement of components during a seismic occurrence and therefore reduce dynamic loadings on the free lower end. The reactor vessel and reactor guard vessel use thicker section roll-forged rings welded between the vessel straight shell sections and the bottom hemispherical head sections. The inside of the reactor guard vessel ring forging contains local vertical dovetail slots and upper ledge pockets to mount and retain field fitted and installed blocks. As an option, the horizontal displacement of the reactor vessel core support cone can be limited by including shop fitted/installed local blocks in opposing alignment with the reactor vessel forged ring. Beams embedded in the wall of the reactor building protrude into apertures in the thermal insulation shell adjacent the reactor guard vessel ring and have motion limit blocks attached thereto to provide to a predetermined clearance between the blocks and reactor guard vessel ring.

  20. Building America Webinar: Saving Energy in Multifamily Buildings...

    Energy Savers [EERE]

    More Documents & Publications Building America Webinar: Retrofit Ventilation Strategies in Multifamily Buildings Webinar Energy Saver Guide Building America...

  1. ASEAN-USAID buildings energy conservation project. Volume 1, Energy standards: Final report

    SciTech Connect (OSTI)

    Levine, M.D.; Busch, J.F. [eds.][Lawrence Berkeley Lab., CA (United States); Deringer, J.J. [Deringer Group, Riva, MD (United States)

    1992-06-01T23:59:59.000Z

    Mandatory or voluntary energy-efficiency standards for new or existing buildings can play an important role in a national program aimed at promoting energy conservation. Building codes and standards can provide a degree of control over design and building practices throughout the construction process, and encourage awareness of energy-conscious design. Studies in developed countries indicate that efficiency standards can produce energy reductions on the order of 20 to 40% or more. Within ASEAN, analyses of the savings potential from the proposed standards suggest that if implemented, these standards would produce savings over current new design practice of 19% to 24%. In this volume we provide an overview of the ASEAN-USAID project aimed at promulgating standards for energy efficiency in commercial buildings. The process of developing and implementing energy-efficiency standards for buildings can be subdivided into two key components: policy development; and technical and economic analysis. Each of these involves a number of steps and processes, as outlined in Figure 1-1. This volume describes the technical and economic analyses used to develop the proposed energy efficiency standards for four countries (Malaysia, Thailand, the Philippines, and Indonesia), and to refine an energy standard existing in Singapore since 1979. Though oriented toward the ASEAN region, the analysis methods described here are applicable in a range of settings, provided appropriate modifications are made for local building construction, climatic, economic, and political conditions. Implementation issues are not specifically addressed here; rather this volume is oriented towards the analytical work needed to establish or revise an energy standard for buildings.

  2. and Pollutant Safeguarding Buildings

    E-Print Network [OSTI]

    commercial buildings, these flows are driven primarily by the building's ventilation system, but natural2004 Airflow and Pollutant Transport Group Safeguarding Buildings Against Chemical and Biological research since 1998 to protect buildings and building occupants from threats posed by airborne chemical

  3. Towards Software Product Lines Application in the Context of a Smart Building Project

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Towards Software Product Lines Application in the Context of a Smart Building Project Thibaut. This paper presents proposals on how to apply software prod- uct lines in the context of smart buildings the various components involved in smart buildings, and to capitalize on the devel- oped IT components

  4. Building America Webinar: Building America Research Tools | Department...

    Energy Savers [EERE]

    Building America Research Tools Building America Webinar: Building America Research Tools This webinar was held on March 18, 2015, and reviewed Building America research tools,...

  5. Building America Top Innovations Hall of Fame Profile - Building...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building America Top Innovations Hall of Fame Profile - Building Energy Optimization Analysis Method (BEopt) Building America Top Innovations Hall of Fame Profile - Building Energy...

  6. Tomography increases key rates of quantum-key-distribution protocols

    E-Print Network [OSTI]

    Shun Watanabe; Ryutaroh Matsumoto; Tomohiko Uyematsu

    2008-07-22T23:59:59.000Z

    We construct a practically implementable classical processing for the BB84 protocol and the six-state protocol that fully utilizes the accurate channel estimation method, which is also known as the quantum tomography. Our proposed processing yields at least as high key rate as the standard processing by Shor and Preskill. We show two examples of quantum channels over which the key rate of our proposed processing is strictly higher than the standard processing. In the second example, the BB84 protocol with our proposed processing yields a positive key rate even though the so-called error rate is higher than the 25% limit.

  7. Quantum key distribution with key extracted from basis information

    E-Print Network [OSTI]

    Xiongfeng Ma

    2014-10-20T23:59:59.000Z

    In conventional quantum key distribution protocols, the secure key is normally extracted from the measurement outcomes of the system. Here, a different approach is proposed, where the secure key is extracted from the measurement bases, rather than outcomes. Compared to the original Bennett-Brassard-1984 protocol, the proposed protocol involves no hardware change but modifications in data postprocessing. We show that this protocol is more robust against detector efficiency attacks and photon-number-splitting attacks when practical detectors and photon sources are used.

  8. Large Component Removal/Disposal

    SciTech Connect (OSTI)

    Wheeler, D. M.

    2002-02-27T23:59:59.000Z

    This paper describes the removal and disposal of the large components from Maine Yankee Atomic Power Plant. The large components discussed include the three steam generators, pressurizer, and reactor pressure vessel. Two separate Exemption Requests, which included radiological characterizations, shielding evaluations, structural evaluations and transportation plans, were prepared and issued to the DOT for approval to ship these components; the first was for the three steam generators and one pressurizer, the second was for the reactor pressure vessel. Both Exemption Requests were submitted to the DOT in November 1999. The DOT approved the Exemption Requests in May and July of 2000, respectively. The steam generators and pressurizer have been removed from Maine Yankee and shipped to the processing facility. They were removed from Maine Yankee's Containment Building, loaded onto specially designed skid assemblies, transported onto two separate barges, tied down to the barges, th en shipped 2750 miles to Memphis, Tennessee for processing. The Reactor Pressure Vessel Removal Project is currently under way and scheduled to be completed by Fall of 2002. The planning, preparation and removal of these large components has required extensive efforts in planning and implementation on the part of all parties involved.

  9. Independent components in acoustic emission energy signals from large diesel engines

    E-Print Network [OSTI]

    components analysis is applied to an observation matrix build from successive acoustic emis- sion energy revolution signals. The paper presents novel results that provide remarkable automatic grouping

  10. 11-001_eecbg_sep_building_best_practice

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    D for both single project end use and whole building actions. The IPMVP requires that key performance indicators that drive the estimates of program impacts should be collected via...

  11. Application of Infrared Thermography in Building Energy Efficiency

    E-Print Network [OSTI]

    Shi, Y.; Chen, H.; Xu, Q.; I, D.; Wang, Z.; Fang, X.

    2006-01-01T23:59:59.000Z

    Based on experience, the paper introduces the key issues during the use of infrared thermography in building energy efficiency. In order to get a more useful thermal infrared spectrum, we must correct the operating apparatus and measure more...

  12. Application of Infrared Thermography in Building Energy Efficiency 

    E-Print Network [OSTI]

    Shi, Y.; Chen, H.; Xu, Q.; I, D.; Wang, Z.; Fang, X.

    2006-01-01T23:59:59.000Z

    Based on experience, the paper introduces the key issues during the use of infrared thermography in building energy efficiency. In order to get a more useful thermal infrared spectrum, we must correct the operating apparatus and measure more...

  13. Real-Time Optimization Strategies for Building Systems

    E-Print Network [OSTI]

    2011-09-02T23:59:59.000Z

    Optimization-based control is a key technology in next-generation building systems. ... For instance, many optimization studies assume that demand shifting is the ...... While demand response programs can provide a financial incentive, current ...

  14. Building America

    SciTech Connect (OSTI)

    Brad Oberg

    2010-12-31T23:59:59.000Z

    Builders generally use a 'spec and purchase' business management system (BMS) when implementing energy efficiency. A BMS is the overall operational and organizational systems and strategies that a builder uses to set up and run its company. This type of BMS treats building performance as a simple technology swap (e.g. a tank water heater to a tankless water heater) and typically compartmentalizes energy efficiency within one or two groups in the organization (e.g. purchasing and construction). While certain tools, such as details, checklists, and scopes of work, can assist builders in managing the quality of the construction of higher performance homes, they do nothing to address the underlying operational strategies and issues related to change management that builders face when they make high performance homes a core part of their mission. To achieve the systems integration necessary for attaining 40% + levels of energy efficiency, while capturing the cost tradeoffs, builders must use a 'systems approach' BMS, rather than a 'spec and purchase' BMS. The following attributes are inherent in a systems approach BMS; they are also generally seen in quality management systems (QMS), such as the National Housing Quality Certification program: Cultural and corporate alignment, Clear intent for quality and performance, Increased collaboration across internal and external teams, Better communication practices and systems, Disciplined approach to quality control, Measurement and verification of performance, Continuous feedback and improvement, and Whole house integrated design and specification.

  15. Finite key analysis for symmetric attacks in quantum key distribution

    SciTech Connect (OSTI)

    Meyer, Tim; Kampermann, Hermann; Kleinmann, Matthias; Bruss, Dagmar [Institut fuer Theoretische Physik III, Heinrich-Heine-Universitaet Duesseldorf, D-40225 Duesseldorf (Germany)

    2006-10-15T23:59:59.000Z

    We introduce a constructive method to calculate the achievable secret key rate for a generic class of quantum key distribution protocols, when only a finite number n of signals is given. Our approach is applicable to all scenarios in which the quantum state shared by Alice and Bob is known. In particular, we consider the six state protocol with symmetric eavesdropping attacks, and show that for a small number of signals, i.e., below n{approx}10{sup 4}, the finite key rate differs significantly from the asymptotic value for n{yields}{infinity}. However, for larger n, a good approximation of the asymptotic value is found. We also study secret key rates for protocols using higher-dimensional quantum systems.

  16. APS Building Monitors

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Building Monitors For non-401 Building Monitors, select: LOMs Other APS Buildings 401 West WCtr Lab Wing ECtr East 5th Floor Yiying Ge na na na na 4th Floor Rick Fenner Karen...

  17. Building Performance Simulation

    E-Print Network [OSTI]

    Hong, Tianzhen

    2014-01-01T23:59:59.000Z

    a future with  very low energy buildings resulting in very consumption  of  low  energy  buildings,  with  site  EUI design and operation of low energy buildings through better 

  18. Thick Buildings [Standards

    E-Print Network [OSTI]

    Coffin, Christie Johnson

    1995-01-01T23:59:59.000Z

    on Occupant Behavior in Buildings, New Directions forSacramento, is a thin building that surrounds an atrium. (Performance of a Green Building," Urban UndQune 1992): 23-

  19. Building Energy Monitoring and Analysis

    E-Print Network [OSTI]

    Hong, Tianzhen

    2014-01-01T23:59:59.000Z

    United States and China, Energy and Buildings, 2013. Underin Singapore. Energy and Buildings, 37, 167-174. Eom, J. ,building operations. Energy and Buildings, 33, 783–791.

  20. BUILDING PROCTOR rev. April 2014

    E-Print Network [OSTI]

    BUILDING PROCTOR MANUAL rev. April 2014 #12;Building Proctor Manual rev. April 2014 2 TABLE.........................................................................................................................................5 Role of a Building Proctor ..............................................................................................................5 Authority of Building Proctor

  1. LEGOS: Object-based software components for mission-critical systems. Final report, June 1, 1995--December 31, 1997

    SciTech Connect (OSTI)

    NONE

    1998-08-01T23:59:59.000Z

    An estimated 85% of the installed base of software is a custom application with a production quantity of one. In practice, almost 100% of military software systems are custom software. Paradoxically, the marginal costs of producing additional units are near zero. So why hasn`t the software market, a market with high design costs and low productions costs evolved like other similar custom widget industries, such as automobiles and hardware chips? The military software industry seems immune to market pressures that have motivated a multilevel supply chain structure in other widget industries: design cost recovery, improve quality through specialization, and enable rapid assembly from purchased components. The primary goal of the ComponentWare Consortium (CWC) technology plan was to overcome barriers to building and deploying mission-critical information systems by using verified, reusable software components (Component Ware). The adoption of the ComponentWare infrastructure is predicated upon a critical mass of the leading platform vendors` inevitable adoption of adopting emerging, object-based, distributed computing frameworks--initially CORBA and COM/OLE. The long-range goal of this work is to build and deploy military systems from verified reusable architectures. The promise of component-based applications is to enable developers to snap together new applications by mixing and matching prefabricated software components. A key result of this effort is the concept of reusable software architectures. A second important contribution is the notion that a software architecture is something that can be captured in a formal language and reused across multiple applications. The formalization and reuse of software architectures provide major cost and schedule improvements. The Unified Modeling Language (UML) is fast becoming the industry standard for object-oriented analysis and design notation for object-based systems. However, the lack of a standard real-time distributed object operating system, lack of a standard Computer-Aided Software Environment (CASE) tool notation and lack of a standard CASE tool repository has limited the realization of component software. The approach to fulfilling this need is the software component factory innovation. The factory approach takes advantage of emerging standards such as UML, CORBA, Java and the Internet. The key technical innovation of the software component factory is the ability to assemble and test new system configurations as well as assemble new tools on demand from existing tools and architecture design repositories.

  2. Living in the Intelligent Workplace Structuring and Managing Building Operation Information

    E-Print Network [OSTI]

    Lam, K. P.; Srivastava, V.

    2005-01-01T23:59:59.000Z

    to record and evaluate operational performance of building components and user comfort (figure 1). So far the IW has experimented with integration of smart building technologies with advanced design and engineering strategies, enabling.... Technological advances over time also influence the composition and configuration of building systems. Buildings create technical challenges of providing individual comfort, organizational flexibility, technological adaptability, environmental sustainability...

  3. Buildings Interoperability Landscape ? DRAFT

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Heating, Refrigerating, and Air-Conditioning Engineers BACS building automation and control system BCHP building-cooling-heating-power BPM Business Process Modeling BTO...

  4. Building Scale DC Microgrids

    E-Print Network [OSTI]

    Marnay, Chris

    2013-01-01T23:59:59.000Z

    Folsom CA, Integration of Renewable Resources: OperationalOffice of Energy Efficiency and Renewable Energy, BuildingOffice of Energy Efficiency and Renewable Energy, Building

  5. Office Buildings - Full Report

    Gasoline and Diesel Fuel Update (EIA)

    1). Table 1. Totals and means of of floorspace, number of workers, and hours of operation for office buildings, 2003 Buildings (thousand) Total Floorspace (million sq. ft.)...

  6. Solar buildings. Overview: The Solar Buildings Program

    SciTech Connect (OSTI)

    Not Available

    1998-04-01T23:59:59.000Z

    Buildings account for more than one third of the energy used in the United States each year, consuming vast amounts of electricity, natural gas, and fuel oil. Given this level of consumption, the buildings sector is rife with opportunity for alternative energy technologies. The US Department of Energy`s Solar Buildings Program was established to take advantage of this opportunity. The Solar Buildings Program is engaged in research, development, and deployment on solar thermal technologies, which use solar energy to produce heat. The Program focuses on technologies that have the potential to produce economically competitive energy for the buildings sector.

  7. Are CHP Systems Ready for Commercial Buildings?

    SciTech Connect (OSTI)

    Katipamula, Srinivas; Brambley, Michael R.; Zaltash, Abdi; Sands, Jim

    2005-06-27T23:59:59.000Z

    This paper highlights challenges associated with integration of CHP systems with existing buildings and maintaining their performance over time. The paper also identifies key research and development needs to address the challenges, so that CHP technologies can deliver the promised performance and reach their full potential market penetration.

  8. An Analysis of Building Envelope Upgrades for Residential Energy Efficiency in Hot and Humid Climates

    E-Print Network [OSTI]

    Malhotra, M.; Haberl, J.

    This paper presents the results of the analyses of various envelope upgrades for residential energyefficiency in hot and humid climates. The building components considered for the upgrades include: building shape, construction type, roof...

  9. Field Analysis of Thermal Comfort in Two Energy Efficient Office Buildings in Malaysia

    E-Print Network [OSTI]

    Qahtan, A. T.; Keumala, N.; Rao, S. P.; Samad, Z. A.

    2010-01-01T23:59:59.000Z

    the effectiveness of tropical passive solar control components in integrating thermal comfort with energy efficiency in office building. Field measurements are carried out in selected workspace of two office buildings that have been practiced the passive solar...

  10. An Analysis of Building Envelope Upgrades for Residential Energy Efficiency in Hot and Humid Climates 

    E-Print Network [OSTI]

    Malhotra, M.; Haberl, J.

    2006-01-01T23:59:59.000Z

    This paper presents the results of the analyses of various envelope upgrades for residential energyefficiency in hot and humid climates. The building components considered for the upgrades include: building shape, construction ...

  11. Section III: Sustainability/ 1 University of Colorado Boulder Master Plan utilization of existing buildings, before building new ones.

    E-Print Network [OSTI]

    Stowell, Michael

    buildings, before building new ones. The Boulder campus recently created a Space Manage- ment Advisory. Goal: ·Approach development with a smart growth ap- proach, which speaks to both campusdesignele key elements to the campus's smart growth princi- ples. Look first to better use existing resources

  12. Better Buildings Neighborhood Program

    Broader source: Energy.gov [DOE]

    U.S. Department of Energy Better Buildings Neighborhood Program: Business Models Guide, October 27, 2011.

  13. NIST Preliminary Reconnaissance, Building

    E-Print Network [OSTI]

    Magee, Joseph W.

    NIST Preliminary Reconnaissance, Building Performance and Emergency Communications, Joplin)): Support R&D to improve building codes and standards and practices for design and construction of buildings of and data collection on the impact of severe wind on buildings, structures, and infrastructure ­ Section 204

  14. RESEARCH BUILDING AT NORTHWESTERN

    E-Print Network [OSTI]

    Engman, David M.

    BIOMEDICAL RESEARCH BUILDING AT NORTHWESTERN MEDICINE #12;"Our new Biomedical Research Building-intensive medical schools. Perkins+Will has designed a building that will be superbly functional and have great a magnificent 12-story Biomedical Research Building to address this priority. The new 600,000 square foot

  15. BUILDING MANAGEMENT & RESTRICTED ACCESS

    E-Print Network [OSTI]

    Johnston, Daniel

    BUILDING MANAGEMENT & RESTRICTED ACCESS Plan Annex 2014 VIII #12;#12;#12;The University of Texas at Austiniv #12;Building Management & Restricted Access Plan Annex v CONTENTS RECORD OF CHANGES .......................................................................................................15 J. BUILDING SECURITY OPERATIONS RESTRICTED ACCESS PROCEDURES FOR BUILDINGS ON ELECTRONIC ACCESS

  16. FOREST CENTRE STORAGE BUILDING

    E-Print Network [OSTI]

    deYoung, Brad

    FOREST CENTRE STORAGE BUILDING 3 4 5 6 7 8 UniversityDr. 2 1 G r e n f e l l D r i v e MULTI PURPOSE COURT STUDENT RESIDENCES GREEN HOUSE STUDENT RESIDENCES STUDENT RESIDENCES RECPLEX STORAGE BUILDING STORAGE BUILDING LIBRARY & COMPUTING FINE ARTS FOREST CENTRE ARTS &SCIENCE BUILDING ARTS &SCIENCE

  17. Community Development Building Division

    E-Print Network [OSTI]

    California Energy Commission 1516 Ninth Street Sacramento, Ca 95814-5514 Re: Green Building Ordinance of Los Altos Energy Efficiency Ordinance, Green Building Regulations under the 2005 California Building by the Board on that date. The Green Building Regulation, Chapter 12.66 of the City Municipal code, will ensure

  18. Bells and Whistles, or Just Plain Effective? The New Generation of Wireless Controls in Existing Commercial Buildings.

    E-Print Network [OSTI]

    LaFlamme, S.

    2013-01-01T23:59:59.000Z

    Wireless controls are a key feature for improving the energy efficiency of existing commercial buildings. But what impact do they really have on building performance? This paper provides three case studies to explore the costs, benefits...

  19. The Ferry Building - San Francisco, CA by SMWM; Baldauf Catton von Eckartsberg; Page & Turnbull [EDRA/Places Awards 2007 -- Design

    E-Print Network [OSTI]

    Sensenig, Chris

    2007-01-01T23:59:59.000Z

    franchises. But as this design award to San Francisco FerryBuilding 2007 EDRA/Places Awards Design center for the saleFerry Building 2007 EDRA/Places Awards Design The second key

  20. The individual contribution of automotive components to vehicle fuel consumption

    E-Print Network [OSTI]

    Napier, Parhys L

    2011-01-01T23:59:59.000Z

    Fuel consumption has grown to become a major point of interest as oil reserves are depleted. The purpose of this study is to determine the key components that cause variation in the instantaneous fuel consumption of vehicles ...

  1. Achieving 50% Energy Savings in Office Buildings, Advanced Energy Design Guides: Office Buildings (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2014-09-01T23:59:59.000Z

    This fact sheet summarizes recommendations for designing new office buildings that result in 50% less energy use than conventional designs meeting minimum code requirements. The recommendations are drawn from the Advanced Energy Design Guide for Small to Medium Office Buildings, an ASHRAE publication that provides comprehensive recommendations for designing low-energy-use office buildings with gross floor areas up to 100,000 ft2 (see sidebar). Designed as a stand-alone document, this fact sheet provides key principles and a set of prescriptive design recommendations appropriate for smaller office buildings with insufficient budgets to fully implement best practices for integrated design and optimized performance. The recommendations have undergone a thorough analysis and review process through ASHRAE, and have been deemed the best combination of measures to achieve 50% savings in the greatest number of office buildings.

  2. Key Issues | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport(FactDepartment ofLetter Report: I11IG002RTC3WASTE-TO-ENERGY:KenKeriKey Issues Key

  3. EA-1035: Relocation of the Weapons Component Testing Facility Los Alamos National Laboratory, Los Alamos, New Mexico

    Broader source: Energy.gov [DOE]

    This EA evaluates the environmental impacts of the proposal to relocate the Weapons Component Testing Facility from Building 450 to Building 207, both within Technical Area 16, at the U.S....

  4. House Simulation Protocols (Building America Benchmark) - Building...

    Energy Savers [EERE]

    House Simulation Protocols. See an example of this Top Innovation in action. Find more case studies of Building America projects across the country that utilize House Simulation...

  5. Building Green in Greensburg: Business Incubator Building

    Office of Energy Efficiency and Renewable Energy (EERE)

    This poster highlights energy efficiency, renewable energy, and sustainable features of the high-performing SunChips Business Incubator building in Greensburg, Kansas.

  6. Building Green in Greensburg: City Hall Building

    Office of Energy Efficiency and Renewable Energy (EERE)

    This poster highlights energy efficiency, renewable energy, and sustainable features of the high-performing City Hall building in Greensburg, Kansas.

  7. Critical pulse power components

    SciTech Connect (OSTI)

    Sarjeant, W.J.; Rohwein, G.J.

    1981-01-01T23:59:59.000Z

    Critical components for pulsed power conditioning systems will be reviewed. Particular emphasis will be placed on those components requiring significant development efforts. Capacitors, for example, are one of the weakest elements in high-power pulsed systems, especially when operation at high-repetition frequencies for extended periods of time are necessary. Switches are by far the weakest active components of pulse power systems. In particular, opening switches are essentially nonexistent for most applications. Insulaton in all systems and components requires development and improvement. Efforts under way in technology base development of pulse power components will be discussed.

  8. Improving the quality and transparency of building life cycle assessment

    E-Print Network [OSTI]

    Hsu, Sophia Lisbeth

    2011-01-01T23:59:59.000Z

    Life cycle assessment, or LCA, is a powerful method for measuring and reducing a building's environmental impacts. Its widespread adoption among designers would allow the environmental component of sustainability to gain ...

  9. alternative building material: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Astrophysics (arXiv) Summary: We discuss the issue of toy model building for the dark energy component of the universe. Specifically, we consider two generic toy models recently...

  10. Key-Insulated Symmetric Key Cryptography and Mitigating Attacks against Cryptographic Cloud Software

    E-Print Network [OSTI]

    Dodis, Yevgeniy

    Key-Insulated Symmetric Key Cryptography and Mitigating Attacks against Cryptographic Cloud- sociated cryptographic keys in their entirety. In this paper, we investigate key-insulated symmetric key. To illustrate the feasibility of key-insulated symmetric key cryptography, we also report a proof

  11. Joseph Vance Building, The

    High Performance Buildings Database

    Seattle, WA In 2006, the Rose Smart Growth Investment Fund acquired the historic Joseph Vance Building with the purpose of transforming it into "the leading green and historic class B" building in the marketplace. The terra cotta Vance Building was constructed in 1929 and has 14 floors - 13 floors of offices over ground-floor retail with a basement for mechanical equipment and storage. In 2009 the U.S. Green Building Council (USGBC) awarded the Vance Building LEED for Existing Buildings (EB) Gold certification.

  12. Building America Top Innovations Hall of Fame Profile - Building...

    Energy Savers [EERE]

    Top Innovations Hall of Fame Profile - Building America's Top Innovations Propel the Home Building Industry toward Higher Performance Building America Top Innovations Hall of Fame...

  13. Building Science-Based Climate Maps - Building America Top Innovation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Science-Based Climate Maps - Building America Top Innovation Building Science-Based Climate Maps - Building America Top Innovation Photo showing climate zone maps based on the IECC...

  14. Trends in Commercial Buildings--Buildings and Floorspace

    U.S. Energy Information Administration (EIA) Indexed Site

    Home > Trends in Commercial Buildings > Trends in Buildings Floorspace Data tables Commercial Buildings TrendDetail Commercial Floorspace TrendDetail Background: Adjustment to...

  15. Building operating systems services: An architecture for programmable buildings.

    E-Print Network [OSTI]

    Dawson-Haggerty, Stephen

    2014-01-01T23:59:59.000Z

    7.3.2 Building Performance Analysis . . . . . . 7.4 RelatedWork 2.1 Building Physical Design . . . . . . . . . .3.2.6 Building Applications . . . . . . . . . . .

  16. Distributed Probabilistic Model-Building Genetic Algorithm

    E-Print Network [OSTI]

    Dongarra, Jack

    is considered by Principal Component Analysis (PCA) when the off- springs are generated. The island modelDistributed Probabilistic Model-Building Genetic Algorithm Tomoyuki Hiroyasu1 , Mitsunori Miki1), Distributed PMBGA (DPMBGA), is proposed. In the DPMBGA, the correlation among the design variables

  17. Scripted Building Energy Modeling and Analysis (Presentation)

    SciTech Connect (OSTI)

    Macumber, D.

    2012-10-01T23:59:59.000Z

    Building energy analysis is often time-intensive, error-prone, and non-reproducible. Entire energy analyses can be scripted end-to-end using the OpenStudio Ruby API. Common tasks within an analysis can be automated using OpenStudio Measures. Graphical user interfaces (GUI's) and component libraries reduce time, decrease errors, and improve repeatability in energy modeling.

  18. Power Signatures as Characteristics of Commercial and Related Buildings

    E-Print Network [OSTI]

    MacDonald, M.

    1988-01-01T23:59:59.000Z

    at many levels? Readers interested in collecting energy data for commercial buildings should consider this classification scheme as a starting point for or- ganizing data on physical characteristics to assist in making comparisons between buildings... aimed at providing equivalent information, and power signa- tures extend component analysis to allow comparisons of dif- ferent time steps. For both component analysis and power signatures (or other methods), development of an under- standing...

  19. For presentation at Building Simulation '99, International Building Performance Simulation Association (IBPSA), September 13-15, 1999, in Kyoto, Japan, and to be published in the Proceedings.

    E-Print Network [OSTI]

    .S. Department of Energy under Contract No. DE-AC03-76SF00098. THERM 2.0: A BUILDING COMPONENT MODEL FOR STEADY-dimensional heat transfer simulations require complex methods for describing the model geometry. This added #12;1 THERM 2.0: A BUILDING COMPONENT MODEL FOR STEADY-STATE TWO-DIMENSIONAL HEAT TRANSFER Charlie

  20. Advancing Net-Zero Energy Commercial Buildings; Electricity, Resources, & Building Systems Integration (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2009-10-01T23:59:59.000Z

    This fact sheet provides an overview of the research the National Renewable Energy Laboratory is conducting to achieve net-zero energy buildings (NZEBs). It also includes key definitions of NZEBs and inforamtion about an NZEB database that captures information about projects around the world.

  1. Building Energy Code

    Broader source: Energy.gov [DOE]

    ''Much of the information presented in this summary is drawn from the U.S. Department of Energy’s (DOE) Building Energy Codes Program and the Building Codes Assistance Project (BCAP). For more...

  2. Building, landscape and section

    E-Print Network [OSTI]

    Johnson, Daniel B. (Daniel Bryant)

    1992-01-01T23:59:59.000Z

    All buildings have in their section a relationship to the landscape on which they are sited. Therefore we as inhabitants of these buildings may or may not have a relationship with the landscape. It is the supposition of ...

  3. Special Building Renovations

    Broader source: Energy.gov [DOE]

    A number of building types have specific energy uses and needs, and as such the renewable opportunities may be different from a typical office building. This section briefly discusses the following...

  4. Model Building Energy Code

    Broader source: Energy.gov [DOE]

    ''Much of the information presented in this summary is drawn from the U.S. Department of Energy’s (DOE) Building Energy Codes Program and the Building Codes Assistance Project (BCAP). For more...

  5. APS Building Managers

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Building Managers BUILDING CONTACT 400,401,402,411,412,413,415,420,431-436,438 Steven Downey 450 Glenn Kailus 382 Joe Gagliano 378 Ed Theres 314 Ed Russell...

  6. Building Energy Code

    Broader source: Energy.gov [DOE]

    Note: Much of the information presented in this summary is drawn from the U.S. Department of Energy’s (DOE) Building Energy Codes Program and the Building Codes Assistance Project (BCAP). For more...

  7. Building Energy Code

    Broader source: Energy.gov [DOE]

    ''Note: Much of the information presented in this summary is drawn from the U.S. Department of Energy’s (DOE) Building Energy Codes Program and the Building Codes Assistance Project (BCAP). For...

  8. Financing green buildings

    E-Print Network [OSTI]

    Pierce, Christopher John, S.M. Massachusetts Institute of Technology

    2013-01-01T23:59:59.000Z

    An emerging trend in real estate is the development of sustainable buildings, partially due to the huge environmental impact of the design, construction and operation of commercial buildings. This thesis provides a brief ...

  9. Building Energy Code

    Broader source: Energy.gov [DOE]

    In 2009 S.B. 1182 created the Oklahoma Uniform Building Code Commission. The 11-member Commission was given the power to conduct rulemaking processes to adopt new building codes. The codes adopted...

  10. Building Energy Code

    Broader source: Energy.gov [DOE]

    Prior to 1997, South Carolina's local governments adopted and enforced the building codes. In 1997, the law required statewide use of the most up-to-date building codes, which then required the...

  11. Building condition monitoring

    E-Print Network [OSTI]

    Samouhos, Stephen V. (Stephen Vincent), 1982-

    2010-01-01T23:59:59.000Z

    The building sector of the United States currently consumes over 40% of the United States primary energy supply. Estimates suggest that between 5 and 30% of any building's annual energy consumption is unknowingly wasted ...

  12. Change in historic buildings

    E-Print Network [OSTI]

    Yin, Chien-Ni

    1992-01-01T23:59:59.000Z

    Change in historic buildings is inevitable. If these changes are not well-managed, the cityscape will be threatened because a city is composed of buildings. A good city should combine both growth and preservation. Controlling ...

  13. PROGRESS IN ENERGY EFFICIENT BUILDINGS

    E-Print Network [OSTI]

    Wall, L.W.

    2009-01-01T23:59:59.000Z

    I Figure 21. Sample building energy use label expressed inanalyses of actual buildings energy consumption data confirm1983. PROGRESS IN ENERGY EFFICIENT BUILDINGS Leonard W. Wall

  14. The Economics of Green Building

    E-Print Network [OSTI]

    Eichholtz, Piet; Kok, Nils; Quigley, John M.

    2010-01-01T23:59:59.000Z

    Benjamin. "Do LEED-Certified Buildings Save Energy? Yes,But,." Energy and Buildings, 2009, 41, pp. 897-905. Royalrating, and publicizing buildings along these dimensions (

  15. Building Energy Monitoring and Analysis

    E-Print Network [OSTI]

    Hong, Tianzhen

    2014-01-01T23:59:59.000Z

    Center for Building Energy Efficiency, and the China Center on Building Energy Efficiency (CERC-BEE) November,1)  CERC  Building  Energy  Efficiency  (CERC?BEE) 

  16. The Economics of Green Building

    E-Print Network [OSTI]

    Eichholtz, Piet; Kok, Nils; Quigley, John M.

    2010-01-01T23:59:59.000Z

    Environment Quality in Green Buildings: A Review," Nationalof Popular Attention to Green Building Notes: Sources:2007 - 2009 panel of green buildings and nearby control

  17. High-performance commercial building systems

    SciTech Connect (OSTI)

    Selkowitz, Stephen

    2003-10-01T23:59:59.000Z

    This report summarizes key technical accomplishments resulting from the three year PIER-funded R&D program, ''High Performance Commercial Building Systems'' (HPCBS). The program targets the commercial building sector in California, an end-use sector that accounts for about one-third of all California electricity consumption and an even larger fraction of peak demand, at a cost of over $10B/year. Commercial buildings also have a major impact on occupant health, comfort and productivity. Building design and operations practices that influence energy use are deeply engrained in a fragmented, risk-averse industry that is slow to change. Although California's aggressive standards efforts have resulted in new buildings designed to use less energy than those constructed 20 years ago, the actual savings realized are still well below technical and economic potentials. The broad goal of this program is to develop and deploy a set of energy-saving technologies, strategies, and techniques, and improve processes for designing, commissioning, and operating commercial buildings, while improving health, comfort, and performance of occupants, all in a manner consistent with sound economic investment practices. Results are to be broadly applicable to the commercial sector for different building sizes and types, e.g. offices and schools, for different classes of ownership, both public and private, and for owner-occupied as well as speculative buildings. The program aims to facilitate significant electricity use savings in the California commercial sector by 2015, while assuring that these savings are affordable and promote high quality indoor environments. The five linked technical program elements contain 14 projects with 41 distinct R&D tasks. Collectively they form a comprehensive Research, Development, and Demonstration (RD&D) program with the potential to capture large savings in the commercial building sector, providing significant economic benefits to building owners and health and performance benefits to occupants. At the same time this program can strengthen the growing energy efficiency industry in California by providing new jobs and growth opportunities for companies providing the technology, systems, software, design, and building services to the commercial sector. The broad objectives across all five program elements were: (1) To develop and deploy an integrated set of tools and techniques to support the design and operation of energy-efficient commercial buildings; (2) To develop open software specifications for a building data model that will support the interoperability of these tools throughout the building life-cycle; (3) To create new technology options (hardware and controls) for substantially reducing controllable lighting, envelope, and cooling loads in buildings; (4) To create and implement a new generation of diagnostic techniques so that commissioning and efficient building operations can be accomplished reliably and cost effectively and provide sustained energy savings; (5) To enhance the health, comfort and performance of building occupants. (6) To provide the information technology infrastructure for owners to minimize their energy costs and manage their energy information in a manner that creates added value for their buildings as the commercial sector transitions to an era of deregulated utility markets, distributed generation, and changing business practices. Our ultimate goal is for our R&D effort to have measurable market impact. This requires that the research tasks be carried out with a variety of connections to key market actors or trends so that they are recognized as relevant and useful and can be adopted by expected users. While some of this activity is directly integrated into our research tasks, the handoff from ''market-connected R&D'' to ''field deployment'' is still an art as well as a science and in many areas requires resources and a timeframe well beyond the scope of this PIER research program. The TAGs, PAC and other industry partners have assisted directly in this effort

  18. Building Operator Certification

    E-Print Network [OSTI]

    Lilley, D.

    2013-01-01T23:59:59.000Z

    Building Operator Certification Energy Efficiency through Operator Training CATEE December 18, 2013 – San Antonio, TX Dennis Lilley, CEM, PMP ESL-KT-13-12-49 CATEE 2013: Clean Air Through Energy Efficiency Conference, San Antonio, Texas Dec. 16...-18 Building Operator Certification Energy Efficiency through Operator Training What is Building Operator Certification? Industry-recognized credential in energy efficient building operation practices Created with 100 industry experts Launched in 1996 9...

  19. Building Songs 5

    E-Print Network [OSTI]

    Zla ba sgrol ma

    2009-10-28T23:59:59.000Z

    . Sman shad building song 5.WAV Length of track 00:02:14 Related tracks (include description/relationship if appropriate) Title of track Building Songs 5 Translation of title Description (to be used in archive entry) Skar ma chos mdzin... sings a building song. Such songs are traditionally sung antiphonally between two groups of men while they are ramming walls. Genre or type (i.e. epic, song, ritual) Building song Name of recorder (if different from collector) Zla ba sgrol ma...

  20. Building Songs 8

    E-Print Network [OSTI]

    Zla ba sgrol ma

    2009-10-28T23:59:59.000Z

    . Sman shad building song 8.WAV Length of track 00:01:28 Related tracks (include description/relationship if appropriate) Title of track Building Songs 8 Translation of title Description (to be used in archive entry) Skar ma chos mdzin... sings a building song. Such songs are traditionally sung antiphonally between two groups of men while they are ramming walls. Genre or type (i.e. epic, song, ritual) Building song Name of recorder (if different from collector) Zla ba sgrol ma...

  1. Building Songs 7

    E-Print Network [OSTI]

    Zla ba sgrol ma

    2009-10-28T23:59:59.000Z

    . Sman shad building song 7.WAV Length of track 00:09:57 Related tracks (include description/relationship if appropriate) Title of track Building Songs 7 Translation of title Description (to be used in archive entry) Skar ma chos mdzin... sings a building song. Such songs are traditionally sung antiphonally between two groups of men while they are ramming walls. Genre or type (i.e. epic, song, ritual) Building song Name of recorder (if different from collector) Zla ba sgrol ma...

  2. Building Performance Evaluation

    E-Print Network [OSTI]

    King, A.; Harris, J.; Mbentin, B.

    2012-01-01T23:59:59.000Z

    Building Performance Evaluation Anne King and Jo Harris, MBEKTN and BSRIA Agenda ? Background to funding and programme ? The Building Performance Evaluation Programme in the UK ? Requirements ? Results ? Impact ? Discussion ? Do you/ How do... you do Building Performance Evaluation? ? What gaps are there and what could research do to fill them? Background ? The Technology Strategy Board ? the funders ? Low Impact Building programme ? BSRIA and others ? evaluators ? Soft Landings...

  3. Kiowa County Commons Building

    Office of Energy Efficiency and Renewable Energy (EERE)

    This poster describes the energy efficiency features and sustainable materials used in the Kiowa County Commons Building in Greensburg, Kansas.

  4. 309 Building transition plan

    SciTech Connect (OSTI)

    Graves, C.E.

    1994-08-31T23:59:59.000Z

    The preparation for decontamination and decommissioning (transition) of the 309 Building is projected to be completed by the end of the fiscal year (FY) 1998. The major stabilization and decontamination efforts include the Plutonium Recycle Test Reactor (PRTR), fuel storage and transfer pits, Transfer Waste (TW) tanks and the Ion Exchange Vaults. In addition to stabilizing contaminated areas, equipment, components, records, waste products, etc., will be dispositioned. All nonessential systems, i.e., heating, ventilation, and air conditioning (HVAC), electrical, monitoring, fluids, etc., will be shut down and drained/de-energized. This will allow securing of the process, laboratory, and office areas of the facility. After that, the facility will be operated at a level commensurate with its surveillance needs while awaiting D&D. The implementation costs for FY 1995 through FY 1998 for the transition activities are estimated to be $1,070K, $2,115K, $2,939K, and $4,762K, respectively. Costs include an assumed company overhead of 20% and a 30% out year contingency.

  5. Executive report Building knowledge

    E-Print Network [OSTI]

    Geffner, Hector

    Executive report Building knowledge To build citizens To build cities UPF CAMPUS ICŔRIA INTERNATIONAL PROJECT 2010 International Campus of Excellence Programme #12;2 UPF CAMPUS ICŔRIA INTERNATIONAL this presentation from the one submitted in the CEI 2009 programme where UPF was classified as a `promising

  6. Archive Reference Buildings by Building Type: Primary school

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the reference buildings for new construction commercial buildings, organized by building type and location. A summary of building types and climate zones is...

  7. Building America Webinar: Building America: Research for Real...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building America Webinar: Building America: Research for Real-World Results Building America Webinar: Building America: Research for Real-World Results December 17, 2014 3:00PM to...

  8. Archive Reference Buildings by Building Type: Stand-alone retail

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the reference buildings for new construction commercial buildings, organized by building type and location. A summary of building types and climate zones is...

  9. Archive Reference Buildings by Building Type: Small office

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the reference buildings for new construction commercial buildings, organized by building type and location. A summary of building types and climate zones is...

  10. Archive Reference Buildings by Building Type: Large office

    Office of Energy Efficiency and Renewable Energy (EERE)

    Here you will find past versions of the reference buildings for new construction commercial buildings, organized by building type and location. A summary of building types and climate zones is...

  11. Archive Reference Buildings by Building Type: Fast food

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the reference buildings for new construction commercial buildings, organized by building type and location. A summary of building types and climate zones is...

  12. Archive Reference Buildings by Building Type: Strip mall

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the reference buildings for new construction commercial buildings, organized by building type and location. A summary of building types and climate zones is...

  13. Archive Reference Buildings by Building Type: Secondary school

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the reference buildings for new construction commercial buildings, organized by building type and location. A summary of building types and climate zones is...

  14. Ground states and dynamics of multi-component Bose-Einstein condensates

    E-Print Network [OSTI]

    Markowich, Peter A.

    Ground states and dynamics of multi-component Bose-Einstein condensates Weizhu Bao #3; Department) an external driven #12;eld for dynamics describing a multi-component Bose- Einstein condensate (BEC) at zero-component Bose-Einstein condensates. Key Words. Multi-component, Bose-Einstein condensate (BEC), Vector Gross

  15. INSERT YOUR BUILDING NAME HERE: BUILDING EMERGENCY PLAN

    E-Print Network [OSTI]

    INSERT YOUR BUILDING NAME HERE: BUILDING EMERGENCY PLAN Date Adopted: 6/4/13 Date Revised: 6/4/13 Prepared By: Tracey Simmerman #12;PURDUE UNIVERSITY BUILDING EMERGENCY PLAN VERSION 3 2 Table of Contents Suspension or Campus Closure SECTION 3: BUILDING INFORMATION 3.1 Building Deputy/Alternate Building Deputy

  16. Buildings and Areas 1001 Broadway Building D1 BDWY

    E-Print Network [OSTI]

    Carter, John

    Design (LEED) Green Building Rating System is a nationally accepted benchmark for the designBuildings and Areas 1001 Broadway Building D1 BDWY 1313 East Columbia Building B3 CLMB Administration Building D1 ADMN Admissions & C2 ADAL Alumni Building Archbishop Murphy A1 ATMA Apartments Arrupe

  17. A nonchromate method for refurbishment of worn metallic components

    SciTech Connect (OSTI)

    Dearnaley, G.; Badger, P. [Southwest Research Inst., San Antonio, TX (United States); [Wear-Cote International Inc., Rock Island, IL (United States)

    1995-12-31T23:59:59.000Z

    Hard chrome electrodeposition is a widely used method for building up worn metallic components, but regulations concerning hexavalent chromium effluent are making this process less acceptable. A new method is described in which electroless nickel with phosphorus is used in a closed-loop system in order to build up the worn surface, and an amorphous diamond-like carbon (DLC) coating is bonded to this to provide a low-friction bearing surface. The combination is highly resistant to wear and corrosion.

  18. Embedded Commissioning for Building Design

    E-Print Network [OSTI]

    Akin, O.; Turkaslan-Bulbul, M. T.; Gursel, I.; Garrett, J. H.; Akinci, B.; Wang, H.

    2004-01-01T23:59:59.000Z

    Building Commissioning has a broad scope that extends to all phases of building delivery. We view commissioning as a building delivery embedded process that persistently verifies and validates design intent throughout the building lifecycle process...

  19. A technical framework to describe occupant behavior for building energy simulations

    SciTech Connect (OSTI)

    Turner , William; Hong , Tianzhen

    2013-12-20T23:59:59.000Z

    Green buildings that fail to meet expected design performance criteria indicate that technology alone does not guarantee high performance. Human influences are quite often simplified and ignored in the design, construction, and operation of buildings. Energy-conscious human behavior has been demonstrated to be a significant positive factor for improving the indoor environment while reducing the energy use of buildings. In our study we developed a new technical framework to describe energy-related human behavior in buildings. The energy-related behavior includes accounting for individuals and groups of occupants and their interactions with building energy services systems, appliances and facilities. The technical framework consists of four key components: i. the drivers behind energy-related occupant behavior, which are biological, societal, environmental, physical, and economical in nature ii. the needs of the occupants are based on satisfying criteria that are either physical (e.g. thermal, visual and acoustic comfort) or non-physical (e.g. entertainment, privacy, and social reward) iii. the actions that building occupants perform when their needs are not fulfilled iv. the systems with which an occupant can interact to satisfy their needs The technical framework aims to provide a standardized description of a complete set of human energy-related behaviors in the form of an XML schema. For each type of behavior (e.g., occupants opening/closing windows, switching on/off lights etc.) we identify a set of common behaviors based on a literature review, survey data, and our own field study and analysis. Stochastic models are adopted or developed for each type of behavior to enable the evaluation of the impact of human behavior on energy use in buildings, during either the design or operation phase. We will also demonstrate the use of the technical framework in assessing the impact of occupancy behavior on energy saving technologies. The technical framework presented is part of our human behavior research, a 5-year program under the U.S. - China Clean Energy Research Center for Building Energy Efficiency.

  20. Commercial Buildings Characteristics, 1992

    SciTech Connect (OSTI)

    Not Available

    1994-04-29T23:59:59.000Z

    Commercial Buildings Characteristics 1992 presents statistics about the number, type, and size of commercial buildings in the United States as well as their energy-related characteristics. These data are collected in the Commercial Buildings Energy Consumption Survey (CBECS), a national survey of buildings in the commercial sector. The 1992 CBECS is the fifth in a series conducted since 1979 by the Energy Information Administration. Approximately 6,600 commercial buildings were surveyed, representing the characteristics and energy consumption of 4.8 million commercial buildings and 67.9 billion square feet of commercial floorspace nationwide. Overall, the amount of commercial floorspace in the United States increased an average of 2.4 percent annually between 1989 and 1992, while the number of commercial buildings increased an average of 2.0 percent annually.

  1. NREL: Energy Analysis - Key Activities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated CodesTransparency Visit | NationalWebmaster To contactK-12BSM -JEDI JobsKey

  2. Key Activities | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed off Energy.gov.Energy02.pdf7 OPAMEnergyInvestigativeCoggin AboutofKathleen HoganKenKeyAbout

  3. Key Activities | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy China 2015of 2005 at IowaSecretaryDepartmentJointof Energy 30,ANDNovember 17,KeyThe

  4. Key Activities | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy China 2015of 2005 at IowaSecretaryDepartmentJointof Energy 30,ANDNovember 17,KeyTheThe

  5. UNDERSTANDING FLOW OF ENERGY IN BUILDINGS USING MODAL ANALYSIS METHODOLOGY

    SciTech Connect (OSTI)

    John Gardner; Kevin Heglund; Kevin Van Den Wymelenberg; Craig Rieger

    2013-07-01T23:59:59.000Z

    It is widely understood that energy storage is the key to integrating variable generators into the grid. It has been proposed that the thermal mass of buildings could be used as a distributed energy storage solution and several researchers are making headway in this problem. However, the inability to easily determine the magnitude of the building’s effective thermal mass, and how the heating ventilation and air conditioning (HVAC) system exchanges thermal energy with it, is a significant challenge to designing systems which utilize this storage mechanism. In this paper we adapt modal analysis methods used in mechanical structures to identify the primary modes of energy transfer among thermal masses in a building. The paper describes the technique using data from an idealized building model. The approach is successfully applied to actual temperature data from a commercial building in downtown Boise, Idaho.

  6. DAYLIGHTING METRICS FOR RESIDENTIAL BUILDINGS

    E-Print Network [OSTI]

    unknown authors

    It is now widely accepted that the standard method for daylighting evaluation- the daylight factor- is due for replacement with metrics founded on absolute values for luminous quantities predicted over the course of a full year using sun and sky conditions derived from standardised climate files. The move to more realistic measures of daylighting introduces significant levels of additional complexity in both the simulation of the luminous quantities and the reduction of the simulation data to readily intelligible metrics. The simulation component, at least for buildings with standard glazing materials, is reasonably well understood. There is no consensus however on the composition of the metrics, and their formulation is an ongoing area of active research. Additionally, non-domestic and residential buildings present very different evaluation scenarios and it is not yet clear if a single metric would be applicable to both. This study uses a domestic dwelling as the setting to investigate and explore the applicability of daylighting metrics for residential buildings. In addition to daylighting provision for task and disclosing the potential for reducing electric lighting usage, we also investigate the formulation of metrics for non-visual effects such as entrainment of the circadian system.

  7. Also Known As (Room or Building)

    E-Print Network [OSTI]

    Mottram, Nigel

    Room No. Also Known As (Room or Building) Hearing Assistance Type 702 InfraRed 704 InfraRed 706 Smith Building Adam Smith Building Adam Smith Building Adam Smith Building Adam Smith Building Adam Smith Building Adam Smith Building Adam Smith Building Adam Smith Building Adam Smith Building Adam

  8. Building Energy Monitoring and Analysis

    E-Print Network [OSTI]

    Hong, Tianzhen

    2014-01-01T23:59:59.000Z

    platforms and  building automation systems (BAS), a building  automation  control,  fault  detection  and  diagnostics  (FDD),  and  continuous  system 

  9. Quantum Key Distribution with Qubit Pairs

    E-Print Network [OSTI]

    Mohd Asad Siddiqui; Tabish Qureshi

    2014-07-17T23:59:59.000Z

    We propose a new Quantum Key Distribution method in which Alice sends pairs of qubits to Bob, each in one of four possible states. Bob uses one qubit to generate a secure key and the other to generate an auxiliary key. For each pair he randomly decides which qubit to use for which key. The auxiliary key has to be added to Bob's secure key in order to match Alice's secure key. This scheme provides an additional layer of security over the standard BB84 protocol.

  10. 240 IEEE TRANSACTIONS ON INFORMATION FORENSICS AND SECURITY, VOL. 5, NO. 2, JUNE 2010 Information-Theoretically Secret Key Generation for

    E-Print Network [OSTI]

    Mandayam, Narayan

    -Theoretically Secret Key Generation for Fading Wireless Channels Chunxuan Ye, Suhas Mathur, Alex Reznik, Yogendra Shah as the basis for building practical secret key gener- ation protocols between two entities. We begin boundaries and a heuristic log likelihood ratio estimate to achieve an improved secret key generation rate

  11. COLLEGE AVE CAMPUS (CAC) KEY PICK UP

    E-Print Network [OSTI]

    COLLEGE AVE CAMPUS (CAC) KEY PICK UP NOTE TO ALL STUDENTS: ONLY YOU CAN PICK UP YOUR KEY. You in and key pick up. If you are unable to pick up your key by 5:00 p.m. on September 1st , please make prior in Clothier Hall on CAC. Keys not picked up during the above-noted hours can be picked up at the Housing

  12. 2013 Building America Research Planning Meeting Summary

    SciTech Connect (OSTI)

    Metzger, C. E.; Hunt, S.

    2014-02-01T23:59:59.000Z

    The Building America (BA) Research Planning Meeting was held October 28-30, 2013, in Washington, DC. This meeting provides one opportunity each year for the research teams, national laboratories and Department of Energy (DOE) managers to meet in person to share the most pertinent information and collaboration updates. This report documents the presentations, highlights key program updates, and outlines next steps for the program.

  13. Improving Building Performance at Urban Scale with a Framework for Real-time Data Sharing

    SciTech Connect (OSTI)

    Pang, Xiufeng; Hong, Tianzhen; Piette, Mary Ann

    2013-06-03T23:59:59.000Z

    This paper describes work in progress toward an urban-scale system aiming to reduce energy use in neighboring buildings by providing three components: a database for accessing past and present weather data from high quality weather stations; a network for communicating energy-saving strategies between building owners; and a set of modeling tools for real-time building energy simulation.

  14. Identification of building applications for a variable-conductance insulation

    SciTech Connect (OSTI)

    Potter, T.F. [National Renewable Energy Lab., Golden, CO (United States); Tuluca, A. [Winter (Steven) Associates, Inc., New York, NY (United States)

    1992-07-01T23:59:59.000Z

    Recent experiments have confirmed the feasibility of controllable, reversible disabling of a vacuum insulation panel, which may result in the development of energy-efficient building envelope components. These components could extend the managed energy exchange through the building envelope from about 30% (typical with fenestration systems in commercial buildings), to as much as 90% of the gross wall and roof areas. Further investigation will be required to optimized the thermal response and the magnitude of the R-value swing (from a difference between insulating and conducting insulating values of 4 to as high as a factor of 100). The potential for energy reduction by using the variable-conductance insulation in the building envelope is discussed, and other potential building applications are mentioned.

  15. Transverse Component Acknowledgements

    E-Print Network [OSTI]

    , 232-237. Raw Data Radial Component Analysis of Treasure Island earthquake data using seismic by Treasure Island Geotechnical Array near San Francisco, California on 06/26/94. It was a magnitude 4

  16. Networks in Buildings: Which Path Forward?

    SciTech Connect (OSTI)

    Nordman, Bruce

    2008-08-17T23:59:59.000Z

    To date, digital networks have principally been installed for connecting information technology devices, with more modest use in consumer electronics, security, and large building control systems. The next 20 years will see much greater deployment of networks in buildings of all types, and across all end uses. Most of these are likely to be introduced primarily for reasons other than energy efficiency, and add energy use for network interfaces and network products. Widespread networking could easily lead to increased energy use, and experience with IT and CE networks suggests this may be likely. Active engagement by energy efficiency professionals in the architecture and design of future networks could lead to their being a large and highly cost-effective tool for efficiency. However, network standards are complex and take many years to develop and negotiate so that lack of action on this in the near term may foreclose important opportunities for years or decades to come. Digital networks need to be common globally, providing another challenge to building systems and elements that are more commonly designed only for national or regional markets. Key future networks are lighting, climate control, and security/presence. This paper reviews some examples of past network designs and use and the lessons they hold for future building networks. It also highlights key needed areas for research, policy, and standards development.

  17. BUILDING EMERGENCY ACTION PLAN [Medical Sciences Building, Building # 192] / [506 S. Mathews, Urbana

    E-Print Network [OSTI]

    Gilbert, Matthew

    BUILDING EMERGENCY ACTION PLAN [Medical Sciences Building, Building # 192] / [506 S. Mathews requires the BUILDING EMERGENCY MANAGEMENT TEAM: Building Command Post1 1. M2 classroom, Carle Forum This Building Emergency Action Plan (BEAP) is to be used in conjunction with the Emergency Response Guide (ERG

  18. Rancho Seco-Planning for Large Components

    SciTech Connect (OSTI)

    Gardiner, D. E.; Newey, J. M; Snyder, M. W.

    2002-02-27T23:59:59.000Z

    The Rancho Seco Nuclear Generating Station ceased operation in June of 1989 and entered an extended period of Safestor to allow funds to accumulate for dismantlement. Incremental dismantlement was begun in 1997 of steam systems and based on the successful work to date, the Sacramento Municipal Utility District (SMUD) board of directors approved full decommissioning in July 1999. A schedule has been developed for completion of decommissioning by 2008, allowing decommissioning funds to accumulate until they are needed. Systems removal began in the Auxiliary Building in October of 1999 and in the Reactor Building in January of 2000. Systems dismantlement continues in the Reactor Building and the Auxiliary Building and should be completed by mid 2003. The Spent Fuel is currently being moved to dry storage in an onsite ISFSI, with completion scheduled for late 2002. The personnel resources on site are currently assigned to support both the dry fuel project and the dismantlement of the facility. Once fuel movement is complete more resources will be provided for dismantlement. Characterization of major components other than the vessel is complete and planning for their removal is in progress with various cut-up and/or shipping options being evaluated. Planning for the vessel and internals removal is being performed. The relatively slow pace of the work allows careful evaluation of cost-effective options as they become available in the industry.

  19. Energy efficient building design: Guidelines for local government

    SciTech Connect (OSTI)

    Balon, R.J.

    1989-07-01T23:59:59.000Z

    The aim of the project was to develop an effective, in-house energy review process for County building design, covering new buildings and major renovations of existing buildings. Montgomery County enacted regulations for energy efficient design of buildings in July 1986. In essence, the regulation sets energy consumption limits for buildings and calls for life-cycle-cost analysis of design choices. In the course of this project significant achievements were realized in the following areas: Energy Design Guidelines were established or refined in several areas of energy technology and design practice. The Energy Review Process was formalized and implemented. Energy personnel received supplemental training in lighting technologies and design methods, energy analysis programs and commercial design standards. The key technical findings of the project are as follows: A combination of energy design tools was found to provide optimum results, including energy analysis, life-cycle-cost analysis, prescriptive standards and guide specifications. There is a dramatic decrease in design energy consumption in buildings processed under the guidelines, ranging from 30 % to 50 % decrease in energy consumption compared to existing County buildings. On average, it was found that energy-efficient new buildings cost no more to build than energy-hog buildings. An economic analysis indicates a very high rate of return in utility savings compared to the cost of implementing the program. 10 figs.

  20. Recent Developments of the Modelica"Buildings" Library for Building Energy and Control Systems

    SciTech Connect (OSTI)

    Wetter, Michael; Zuo, Wangda; Nouidui, Thierry Stephane

    2011-04-01T23:59:59.000Z

    At the Modelica 2009 conference, we introduced the Buildings library, a freely available Modelica library for building energy and control systems. This paper reports the updates of the library and presents example applications for a range of heating, ventilation and air conditioning (HVAC) systems. Over the past two years, the library has been further developed. The number of HVAC components models has been doubled and various components have been revised to increase numerical robustness.The paper starts with an overview of the library architecture and a description of the main packages. To demonstrate the features of the Buildings library, applications that include multizone airflow simulation as well as supervisory and local loop control of a variable air volume (VAV) system are briefly described. The paper closes with a discussion of the current development.

  1. Buildings Energy Program annual report, FY 1991

    SciTech Connect (OSTI)

    Secrest, T.J.

    1992-05-01T23:59:59.000Z

    The Buildings Energy Program at PNL conducts research and development (R&D) for DOE`s Office of Building Technologies (OBT). The OBT`s mission is to lead a national program supporting private and federal sector efforts to improve the energy efficiency of the nation`s buildings and to increase the use of renewable energy sources. Under an arrangement with DOE, Battelle staff also conduct research and development projects for other federal agencies and private clients. This annual report contains an account of the buildings-related research projects conducted at PNL during fiscal year (FY) 1991. A major focus of PNL`s energy projects is to improve the energy efficiency of commercial and residential buildings. Researchers who are developing solutions to energy-use problems view a building as an energy-using system. From this perspective, a desirable solution is not only one that is cost-effective and responsive to the needs of the occupants, but also one that optimizes the interaction among the energy components and systems that compose the whole.

  2. The Lovejoy Building

    High Performance Buildings Database

    Portland, OR Originally built in 1910 as the stables for the Marshall-Wells Hardware Company, the Lovejoy Building is the home of Opsis Architects. The owner/architects purchased and renovated the historic building to house their growing business and to provide ground-floor office lease space and second-floor offices for their firm. Opsis wanted to use the building to experience and demonstrate the technologies and practices it promotes with clients.

  3. Method to assess the gross annual energy-saving potential of energy conservation technologies used in commercial buildings

    SciTech Connect (OSTI)

    Friedrich, M.; Messinger, M.T. [Pacific Northwest Lab., Richland, WA (United States)

    1995-08-01T23:59:59.000Z

    A newly developed engineering model has made it possible to assess large numbers of US commercial buildings with a relatively small number of computer simulations. The model aggregates energy use over different climates, fuel types, building sizes, and building types. The resulting information indicates the extent to which a building component affects building energy use, enabling researchers to focus on developing technologies in those areas with the highest energy-saving potential. The information also suggests which building components to focus on in those same areas for dement of building energy conservation standards. The method is currently used to analyze the effects of energy-efficiency standards to new commercial buildings constructed in the United States. With some modification, broader applications could include assessments of energy-saving retrofits to the existing building stock and assessments of the energy savings of new technologies used in both new and existing buildings.

  4. Building Songs 10

    E-Print Network [OSTI]

    Zla ba sgrol ma

    2009-11-06T23:59:59.000Z

    . Sman shad building song 10.WAV Length of track 00:06:03 Related tracks (include description/relationship if appropriate) Title of track Building Songs 10 Translation of title Description (to be used in archive entry) Male villagers... sing a building song. Genre or type (i.e. epic, song, ritual) Building song Name of recorder (if different from collector) Zla ba sgrol ma Date of recording November 6th 2009. Place of recording Gad dmar khug market Mda' ma Township, Sde dge...

  5. What is Building America?

    SciTech Connect (OSTI)

    None

    2013-06-20T23:59:59.000Z

    DOE's Building America program is helping to bridge the gap between homes with high energy costs and homes that are healthy, durable, and energy efficient.

  6. Building Songs 11

    E-Print Network [OSTI]

    Zla ba sgrol ma

    2009-11-06T23:59:59.000Z

    . Sman shad building song 11.WAV Length of track 00:21:12 Related tracks (include description/relationship if appropriate) Title of track Building Songs 11 Translation of title Description (to be used in archive entry) Male villagers... sing a building song. Genre or type (i.e. epic, song, ritual) Building song Name of recorder (if different from collector) Zla ba sgrol ma Date of recording November 6th 2009. Place of recording Gad dmar khug market Mda' ma Township, Sde dge...

  7. ORISE: Capacity Building

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Capacity Building Because public health agencies must maintain the resources to respond to public health challenges, critical situations and emergencies, the Oak Ridge Institute...

  8. What is Building America?

    ScienceCinema (OSTI)

    None

    2013-07-22T23:59:59.000Z

    DOE's Building America program is helping to bridge the gap between homes with high energy costs and homes that are healthy, durable, and energy efficient.

  9. Building Science- Ventilation

    Broader source: Energy.gov [DOE]

    This presentation was given at the Summer 2012 DOE Building America meeting on July 25, 2012, and addressed the question Ť"What are the best ventilation techniques"

  10. High Performance Sustainable Buildings

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    to achieve Leadership in Energy and Environmental Design gold certification from the U.S. Green Building Council. The Center for Integrated Nanotechnologies brings together...

  11. Forest Road Building Regulations

    Broader source: Energy.gov [DOE]

    The Wisconsin Department of Natural Resources has regulations for building a forest road, if development requires one. Regulations include zoning ordinances and permits for stream crossing, grading...

  12. building.ppt

    E-Print Network [OSTI]

    Building Parenting Skills and Interactions with Kangaroo Care. Sharon A. Wilkerson, PhD, RN. Associate Professor of Nursing. Purdue University. West Lafayette ...

  13. Whole Building Energy Simulation

    Broader source: Energy.gov [DOE]

    Whole building energy simulation, also referred to as energy modeling, can and should be incorporated early during project planning to provide energy impact feedback for which design considerations...

  14. Building bridges for fish

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Building-bridges-for-fish Sign In About | Careers | Contact | Investors | bpa.gov Search News & Us Expand News & Us Projects & Initiatives Expand Projects & Initiatives...

  15. Chapter 3: Building Siting

    Broader source: Energy.gov (indexed) [DOE]

    and up, especially at doors and loading docks, requires loading docks on the south side of buildings. significant effort and energy for snow removal. Desirable locations of...

  16. City of San Antonio, Texas Better Buildings Program

    SciTech Connect (OSTI)

    Meyer, Liza C.

    2014-06-30T23:59:59.000Z

    The San Antonio Better Buildings Program is a unified single?point?of?service energy efficiency delivery mechanism targeting residential, commercial, institutional, industrial and public buildings. This comprehensive and replicable energy efficiency program is designed to be an effective demand side management initiative to provide a seamless process for program participants to have turn?key access to expert analysis, support and incentives to improve the performance of their in?place energy using systems, while reducing electrical energy use and demand.

  17. Answering Key Fuel Cycle Questions

    SciTech Connect (OSTI)

    Steven J. Piet; Brent W. Dixon; J. Stephen Herring; David E. Shropshire; Mary Lou Dunzik-Gougar

    2003-10-01T23:59:59.000Z

    The Advanced Fuel Cycle Initiative (AFCI) program has both “outcome” and “process” goals because it must address both waste already accumulating as well as completing the fuel cycle in connection with advanced nuclear power plant concepts. The outcome objectives are waste geological repository capacity and cost, energy security and sustainability, proliferation resistance, fuel cycle economics, and safety. The process objectives are readiness to proceed and adaptability and robustness in the face of uncertainties. A classic decision-making approach to such a multi-attribute problem would be to weight individual quantified criteria and calculate an overall figure of merit. This is inappropriate for several reasons. First, the goals are not independent. Second, the importance of different goals varies among stakeholders. Third, the importance of different goals is likely to vary with time, especially the “energy future.” Fourth, some key considerations are not easily or meaningfully quantifiable at present. Instead, at this point, we have developed 16 questions the AFCI program should answer and suggest an approach of determining for each whether relevant options improve meeting each of the program goals. We find that it is not always clear which option is best for a specific question and specific goal; this helps identify key issues for future work. In general, we suggest attempting to create as many win-win decisions (options that are attractive or neutral to most goals) as possible. Thus, to help clarify why the program is exploring the options it is, and to set the stage for future narrowing of options, we have developed 16 questions, as follows: · What are the AFCI program goals? · Which potential waste disposition approaches do we plan for? · What are the major separations, transmutation, and fuel options? · How do we address proliferation resistance? · Which potential energy futures do we plan for? · What potential external triggers do we plan for? · Should we separate uranium? · If we separate uranium, should we recycle it, store it or dispose of it? · Is it practical to plan to fabricate and handle “hot” fuel? · Which transuranic elements (TRU) should be separated and transmuted? · Of those TRU separated, which should be transmuted together? · Should we separate and/or transmute Cs and Sr isotopes that dominate near-term repository heating? · Should we separate and/or transmute very long-lived Tc and I isotopes? · Which separation technology? · What mix of transmutation technologies? · What fuel technology best supports the above decisions?

  18. Comparison of Building Energy Modeling Programs: Building Loads

    E-Print Network [OSTI]

    LBNL-6034E Comparison of Building Energy Modeling Programs: Building Loads Dandan Zhu1 , Tianzhen Energy, the U.S.-China Clean Energy Research Center for Building Energy Efficiency, of the U;Comparison of Building Energy Modeling Programs: Building Loads A joint effort between Lawrence Berkeley

  19. New! Building Energy Standards Essentials for Plans Examiners & Building Inspectors

    E-Print Network [OSTI]

    New! Building Energy Standards Essentials for Plans Examiners & Building Inspectors Building energy codes are complex. Plans examiners and building inspectors are expected to understand and enforce energy savings. This new, hands-on course strives to provide plans examiners and building inspectors

  20. Building and Facility Codes Code Building Location Bldg # Coordinates

    E-Print Network [OSTI]

    Russell, Lynn

    Building and Facility Codes Code Building Location Bldg # Coordinates APM Applied Physics & Mathematics Building Muir 249 F7 ASANT Asante Hall Eleanor Roosevelt 446 F5 BIO Biology Building Muir 259 F7 BIRCH Birch Aquarium SIO 2300 S-D7 BONN Bonner Hall Revelle 131 G8 BSB Biomedical Sciences Building

  1. Components in the Pipeline

    SciTech Connect (OSTI)

    Gorton, Ian; Wynne, Adam S.; Liu, Yan (Jenny); Yin, Jian

    2011-02-24T23:59:59.000Z

    Scientists commonly describe their data processing systems metaphorically as software pipelines. These pipelines input one or more data sources and apply a sequence of processing steps to transform the data and create useful results. While conceptually simple, pipelines often adopt complex topologies and must meet stringent quality of service requirements that place stress on the software infrastructure used to construct the pipeline. In this paper we describe the MeDICi Integration Framework, which is a component-based framework for constructing complex software pipelines. The framework supports composing pipelines from distributed heterogeneous software components and provides mechanisms for controlling qualities of service to meet demanding performance, reliability and communication requirements.

  2. Building sustainable ecosystem-oriented architectures

    E-Print Network [OSTI]

    Bassil, Youssef

    2012-01-01T23:59:59.000Z

    Currently, organizations are transforming their business processes into e-services and service-oriented architectures to improve coordination across sales, marketing, and partner channels, to build flexible and scalable systems, and to reduce integration-related maintenance and development costs. However, this new paradigm is still fragile and lacks many features crucial for building sustainable and progressive computing infrastructures able to rapidly respond and adapt to the always-changing market and environmental business. This paper proposes a novel framework for building sustainable Ecosystem- Oriented Architectures (EOA) using e-service models. The backbone of this framework is an ecosystem layer comprising several computing units whose aim is to deliver universal interoperability, transparent communication, automated management, self-integration, self-adaptation, and security to all the interconnected services, components, and devices in the ecosystem. Overall, the proposed model seeks to deliver a co...

  3. Methods for Automated and Continuous Commissioning of Building Systems

    SciTech Connect (OSTI)

    Larry Luskay; Michael Brambley; Srinivas Katipamula

    2003-04-30T23:59:59.000Z

    Avoidance of poorly installed HVAC systems is best accomplished at the close of construction by having a building and its systems put ''through their paces'' with a well conducted commissioning process. This research project focused on developing key components to enable the development of tools that will automatically detect and correct equipment operating problems, thus providing continuous and automatic commissioning of the HVAC systems throughout the life of a facility. A study of pervasive operating problems reveled the following would most benefit from an automated and continuous commissioning process: (1) faulty economizer operation; (2) malfunctioning sensors; (3) malfunctioning valves and dampers, and (4) access to project design data. Methodologies for detecting system operation faults in these areas were developed and validated in ''bare-bones'' forms within standard software such as spreadsheets, databases, statistical or mathematical packages. Demonstrations included flow diagrams and simplified mock-up applications. Techniques to manage data were demonstrated by illustrating how test forms could be populated with original design information and the recommended sequence of operation for equipment systems. Proposed tools would use measured data, design data, and equipment operating parameters to diagnosis system problems. Steps for future research are suggested to help more toward practical application of automated commissioning and its high potential to improve equipment availability, increase occupant comfort, and extend the life of system equipment.

  4. Engineering Building a better

    E-Print Network [OSTI]

    Barthelat, Francois

    and modern buildings laid out around an oasis of green space. Much like the multicultural population restoration, waste reduction, climate change impact mitigation and air pollution abatement. + 5 COURSESCivil Engineering future Building a better #12;McGill University Montreal, with a population

  5. BUILDING ENERGY 1987 Edition

    E-Print Network [OSTI]

    changes in lighting control and HVAC requirements. The lighting control requirements in Section 2-5319(a, are required for all alterations. The HVAC requirements of new buildings are requ ired for some HVAC alterat for a wide variety of building shapes. "SECOND GENERATioN" ALTERNATIVE HVAC COMPLIANCE CODIFIED 4

  6. Building Technologies Research and

    E-Print Network [OSTI]

    Oak Ridge National Laboratory

    Impact of Buildings Centers of Excellence · 40% of total primary energy consumption · 74% of electricity consumption · 56% of natural gas consumption (including gas-generated electricity used in buildings) · 39 the nation accounts for its energy consumption, making the energy savings potential even greater. National

  7. High Performance Sustainable Building

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2008-06-20T23:59:59.000Z

    The guide supports DOE O 413.3A and provides useful information on the incorporation of high performance sustainable building principles into building-related General Plant Projects and Institutional General Plant Projects at DOE sites. Canceled by DOE G 413.3-6A. Does not cancel other directives.

  8. 200 Market Building

    High Performance Buildings Database

    Portland, OR The 200 Market Building is a high-rise built in 1973 and located in downtown Portland, Oregon. It was purchased in 1988 by its current owner, 200 Market Associates, primarily because of its optimal location in Portland's central business district. Since 1989 the building has undergone continuous improvements in multiple phases.

  9. PHOTOVOLTAICS AND COMMERCIAL BUILDINGS--

    E-Print Network [OSTI]

    Perez, Richard R.

    management of electricity demand. · PV applications are now being integrated directly into building roofs, Valuation of Demand-Side Commercial PV Systems in the United States, we sought to measure the costPHOTOVOLTAICS AND COMMERCIAL BUILDINGS-- A NATURAL MATCH A study highlighting strategic

  10. Quantum Key Distribution with Screening and Analyzing

    E-Print Network [OSTI]

    Won-Ho Kye

    2006-10-04T23:59:59.000Z

    We propose a quantum key distribution scheme by using screening angles and analyzing detectors which enable to notice the presence of Eve who eavesdrops the quantum channel, as the revised protocol of the recent quantum key distribution [Phys. Rev. Lett. 95, 040501 (2005)]. We discuss the security of the proposed quantum key distribution against various attacks including impersonation attack and Trojan Horse attack.

  11. Lightweight Key Establishment for Distributed Networking Environments

    E-Print Network [OSTI]

    Martin, Keith

    / COSIC Seminar 2007 Keith Martin #12;Lightweight Key Establishment/Introduction The plan 1. Wireless sensor networks 2. A key establishment framework 3. Key establishment for grids COSIC Seminar 2007 Keith Establishment/Wireless sensor networks The "classical" scenario COSIC Seminar 2007 Keith Martin #12;Lightweight

  12. The Role of Energy Storage in Commercial Building

    SciTech Connect (OSTI)

    Kintner-Meyer, Michael CW; Subbarao, Krishnappa; Prakash Kumar, Nirupama; Bandyopadhyay, Gopal K.; Finley, C.; Koritarov, V. S.; Molburg, J. C.; Wang, J.; Zhao, Fuli; Brackney, L.; Florita, A. R.

    2010-09-30T23:59:59.000Z

    Motivation and Background of Study This project was motivated by the need to understand the full value of energy storage (thermal and electric energy storage) in commercial buildings, the opportunity of benefits for building operations and the potential interactions between a building and a smart grid infrastructure. On-site or local energy storage systems are not new to the commercial building sector; they have been in place in US buildings for decades. Most building-scale storage technologies are based on thermal or electrochemical storage mechanisms. Energy storage technologies are not designed to conserve energy, and losses associated with energy conversion are inevitable. Instead, storage provides flexibility to manage load in a building or to balance load and generation in the power grid. From the building owner's perspective, storage enables load shifting to optimize energy costs while maintaining comfort. From a grid operations perspective, building storage at scale could provide additional flexibility to grid operators in managing the generation variability from intermittent renewable energy resources (wind and solar). To characterize the set of benefits, technical opportunities and challenges, and potential economic values of storage in a commercial building from both the building operation's and the grid operation's view-points is the key point of this project. The research effort was initiated in early 2010 involving Argonne National Laboratory (ANL), the National Renewable Energy Laboratory (NREL), and Pacific Northwest National Laboratory (PNNL) to quantify these opportunities from a commercial buildings perspective. This report summarizes the early discussions, literature reviews, stakeholder engagements, and initial results of analyses related to the overall role of energy storage in commercial buildings. Beyond the summary of roughly eight months of effort by the laboratories, the report attempts to substantiate the importance of active DOE/BTP R&D activities in this space.

  13. Reference Buildings by Building Type: Small Hotel

    Office of Energy Efficiency and Renewable Energy (EERE)

    In addition to the ZIP file for each building type, you can directly view the "scorecard" spreadsheet that summarizes the inputs and results for each location. This Microsoft Excel spreadsheet is also included in the ZIP file. For version 1.4, only the IDF file is included.

  14. Reference Buildings by Building Type: Large Hotel

    Office of Energy Efficiency and Renewable Energy (EERE)

    In addition to the ZIP file for each building type, you can directly view the "scorecard" spreadsheet that summarizes the inputs and results for each location. This Microsoft Excel spreadsheet is also included in the ZIP file. For version 1.4, only the IDF file is included.

  15. BUILDING PERFORMANCE ENGINEERING DURING CONSTRUCTION

    E-Print Network [OSTI]

    Toole, T. Michael

    1 BUILDING PERFORMANCE ENGINEERING DURING CONSTRUCTION T. Michael Toole1 and Matthew Hallowell2 of building performance engineering tasks on design-bid-build projects are typically provided by entities building construction projects. Twenty four building performance engineering tasks were required

  16. About Singapore Green Building Council

    E-Print Network [OSTI]

    About Singapore Green Building Council About SGBC Green Building Conference Conference Programme Green Building Conference In line with the mission of the Singapore Green Building Council (SGBC is please to present the inaugural SGBC Green Building Conference 2010 to be held from 13 ­ 16 September

  17. NREL Buildings Research Video

    ScienceCinema (OSTI)

    None

    2013-05-29T23:59:59.000Z

    Through research, the National Renewable Energy Laboratory (NREL) has developed many strategies and design techniques to ensure both commercial and residential buildings use as little energy as possible and also work well with the surroundings. Here you will find a video that introduces the work of NREL Buildings Research, highlights some of the facilities on the NREL campus, and demonstrates these efficient building strategies. Watch this video to see design highlights of the Science and Technology Facility on the NREL campus?the first Federal building to be LEED® Platinum certified. Additionally, the video demonstrates the energy-saving features of NRELs Thermal Test Facility. For a text version of this video visit http://www.nrel.gov/buildings/about_research_text_version.html

  18. City of Scottsdale- Green Building Policy for Public Buildings

    Broader source: Energy.gov [DOE]

    In 2005, Scottsdale approved a green building policy for new city buildings and remodels. The resolution requires all new, occupied city buildings of any size to be designed, contracted and built...

  19. Component-based Specification of Software Architecture Constraints

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    engineering provides for develop- ers the ability to easily reuse and assemble software entities to build phase of the software lifecycle. They propose to de- velopers to explicit, in a structured way, designComponent-based Specification of Software Architecture Constraints Chouki Tibermacine LIRMM, CNRS

  20. Economic assessment of candidate materials for key components in a grid-scale liquid metal battery

    E-Print Network [OSTI]

    Parent, Michael C. (Michael Calvin)

    2011-01-01T23:59:59.000Z

    In order to satisfy the growing demand for renewable resources as a supply of electricity, much effort is being placed toward the development of battery energy storage systems that can effectively interface these new sources ...

  1. ITL BULLETIN FOR AUGUST 2011 PROTECTING INDUSTRIAL CONTROL SYSTEMS KEY COMPONENTS OF

    E-Print Network [OSTI]

    , transportation, healthcare, and emergency services sectors. Federal agencies also operate critical production, handling, and distribution. ICS are used in many industries: electric, water, oil and gas

  2. Reliability Testing Beyond Qualification as a Key Component in Photovoltaic's Progress Toward Grid Parity: Preprint

    SciTech Connect (OSTI)

    Wohlgemuth, J. H.; Kurtz, S.

    2011-02-01T23:59:59.000Z

    This paper discusses why it is necessary for new lower cost PV modules to be tested using a reliability test sequence that goes beyond the Qualification test sequence now utilized for modules. Today most PV modules are warranted for 25 years, but the Qualification Test Sequence does not test for 25-year life. There is no accepted test protocol to validate a 25-year lifetime. This paper recommends the use of long term accelerated testing to compare now designs directly with older designs that have achieved long lifetimes in outdoor exposure. If the new designs do as well or better than the older ones, then it is likely that they will survive an equivalent length of time in the field.

  3. Scientists Confirm Robustness of Key Component in Ultra-High-Efficiency Solar Cell (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2011-05-01T23:59:59.000Z

    Scientists developed and tested a new, stable 1-eV metamorphic junction for a high efficiency multijunction III-V solar cell for CPV application.

  4. Cooling Towers: Understanding Key Components of Cooling Towers and How to

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011AT&T, Inc.'sEnergyTexas1.SpaceFluorControls andCONVENTIONAL ENERGY|Cool

  5. Cooling Towers: Understanding Key Components of Cooling Towers and How to Improve Water Efficiency

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: Theof"Wave theJuly 30, 2013 Sanyo:MarchPracticesPresentation fromSource: Paul

  6. Structure of the MTIP-MyoA Complex, a Key Component of the Malaria Parasite

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over Our InstagramStructure of All-Polymer SolarStructure of the Kinase Domain ofInvasion

  7. Property:Have Key Components Been Fabricated and Tested in the Lab? | Open

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal PwerPerkins County, Nebraska:PrecourtOid Jump to:DocketFlowGpmGrossGen Jump to:Energy

  8. Presentation: Better Buildings Residential Program Solution Center...

    Office of Environmental Management (EM)

    Presentation: Better Buildings Residential Program Solution Center Presentation: Better Buildings Residential Program Solution Center Presentation: Better Buildings Residential...

  9. Building Technologies Program | Clean Energy | ORNL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Building Technologies Program SHARE Building Technologies Program The Building Technologies Program Office administratively facilitates the integration of ORNL research across...

  10. Information Technology Tools for Multifamily Building Programs...

    Energy Savers [EERE]

    Information Technology Tools for Multifamily Building Programs Information Technology Tools for Multifamily Building Programs Better Buildings Neighborhood Program Multifamily ...

  11. Building America Webinar: Retrofit Ventilation Strategies in...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Strategies in Multifamily Buildings Webinar Building America Webinar: Retrofit Ventilation Strategies in Multifamily Buildings Webinar This webinar, presented by...

  12. Better Buildings Residential Program Solution Center Demonstration...

    Energy Savers [EERE]

    Better Buildings Residential Program Solution Center Demonstration Better Buildings Residential Program Solution Center Demonstration Better Buildings Residential Program Solution...

  13. Membership Criteria: Better Buildings Residential Network | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Membership Criteria: Better Buildings Residential Network Membership Criteria: Better Buildings Residential Network Membership Criteria: Better Buildings Residential Network...

  14. Better Buildings Neighborhood Program Grant Recipient Management...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Better Buildings Neighborhood Program Grant Recipient Management Handbook Better Buildings Neighborhood Program Grant Recipient Management Handbook Better Buildings Neighborhood...

  15. Model Predictive Control for Energy Efficient Buildings

    E-Print Network [OSTI]

    Ma, Yudong

    2012-01-01T23:59:59.000Z

    Building thermal loadThe building thermal load predictor. . . . . . . .of Figures 1.1 Classification schematic for building MPC

  16. Building wall heat flux calculations

    SciTech Connect (OSTI)

    Park, J.E.; Kirkpatrick, J.R.; Tunstall, J.N.; Childs, K.W.

    1987-01-01T23:59:59.000Z

    Calculations of the heat transfer through the standard stud wall structure of a residential building are described. The wall cavity contains no insulation. Four of the five test cases represent progressively more complicated approximations to the heat transfer through and within a hollow wall structure. The fifth adds the model components necessary to severely inhibit the radiative energy transport across the empty cavity. Flow within the wall cavity is calculated from the Navier-Stokes equations and the energy conservation equation for an ideal gas using the Implicit Compressible Eulerian (ICE) algorithm. The fluid flow calculation is coupled to the radiation-conduction model for the solid portions of the system. Conduction through sill plates is about 4% of the total heat transferred through a composite wall.

  17. Building America Solution Center - Building America Top Innovation...

    Energy Savers [EERE]

    America Top Innovation SCimagemale.jpg The Building America Solution Center is a Web-based tool connecting users to fast, free, and expert building science and energy...

  18. Better Buildings Neighborhood Initiative Upgrades 100,000 Buildings...

    Broader source: Energy.gov (indexed) [DOE]

    Building on President Obama's Climate Action Plan and the Administration's Better Buildings Initiative, the Energy Department announced today that the Department's Better...

  19. A Look at Principal Building Activities in Commercial Buildings

    Gasoline and Diesel Fuel Update (EIA)

    Buildings Home> Special Topics > 1995 Principal Building Activities Office Education Health Care Retail and Service Food Service Food Sales Lodging Religious Worship Public...

  20. Webinar: Make Your Building Sing!: Building-Retuning to Reduce...

    Broader source: Energy.gov (indexed) [DOE]

    (PNNL) developed a curricula focused on retuning both large (with a building automation system, or BAS) and small (without a BAS) commercial buildings. Hear from Better...

  1. Building America Webinar: Building America Technology-to-Market...

    Broader source: Energy.gov (indexed) [DOE]

    introduced the integrated Building America Technology-to-Market Roadmaps that will serve as a guide for Building America's research, development, and demonstration activities over...

  2. Molecular Components of Catalytic Selectivity

    SciTech Connect (OSTI)

    Somorjai, Gabor A.; Park, Jeong Y.

    2008-07-02T23:59:59.000Z

    Selectivity, that is, to produce one molecule out of many other thermodynamically feasible product molecules, is the key concept to develop 'clean manufacturing' processes that do not produce byproducts (green chemistry). Small differences in potential energy barriers for elementary reaction steps control which reaction channel is more likely to yield the desired product molecule (selectivity), instead of the overall activation energy for the reaction that controls turnover rates (activity). Recent studies have demonstrated the atomic- or molecular-level tailoring of parameters such as the surface structures of active sites that give rise to nanoparticle size and shape dependence of turnover rates and reaction selectivities. Here, we highlight seven molecular components that influence reaction selectivities. These include: surface structure, adsorbate-induced restructuring, adsorbate mobility, reaction intermediates, surface composition, charge transport, and oxidation states for model metal single crystal and colloid nanoparticle catalysts. We show examples of their functioning and describe in-situ instruments that permit us to investigate their roles in surface reactions.

  3. Hawaii Clean Energy Initiative Existing Building Energy Efficiency Analysis: November 17, 2009- June 30, 2010

    Office of Energy Efficiency and Renewable Energy (EERE)

    This report presents the results of the Booz Allen Hamilton study on the existing building stock of Hawaii, along with conclusions on the key drivers of potential energy efficiency savings and on the steps necessary to attain them.

  4. Building America Summer 2012 Technical Update Meeting Report: Denver, Colorado - July 24 - 26, 2012

    SciTech Connect (OSTI)

    Not Available

    2012-10-01T23:59:59.000Z

    This report summarizes key findings and outcomes from the U.S. Department of Energy's Building America Summer Technical Update Meeting, held on July 24-26, 2012, in Denver, Colorado.

  5. Component acquisition and single-source vendor management strategy in a defense application

    E-Print Network [OSTI]

    Hammer, Lory (Lory Yeamans)

    2009-01-01T23:59:59.000Z

    Building an aircraft carrier is one of the most complex manufacturing undertakings in the world. Each component must be designed, tested and manufactured to not only Northrop Grumman Shipbuilding's (NGSB) exceptionally ...

  6. Testing and examination of TMI-2 electrical components and discrete devices

    SciTech Connect (OSTI)

    Soberano, F.T.

    1982-11-01T23:59:59.000Z

    This report discusses the approach and results of the in situ test conducted on TMI-2 reactor building electrical components and discrete devices. Also included are the necessary presumptions and assumptions to correlate observed anomalies to the accident.

  7. PROGRESS IN ENERGY EFFICIENT BUILDINGS

    E-Print Network [OSTI]

    Wall, L.W.

    2009-01-01T23:59:59.000Z

    Seven recent energy-efficient U.S. office buildings areSeven recent energy-efficient U.S. office buildings are18, 1983. PROGRESS IN ENERGY EFFICIENT BUILDINGS Leonard W.

  8. PROGRESS IN ENERGY EFFICIENT BUILDINGS

    E-Print Network [OSTI]

    Wall, L.W.

    2009-01-01T23:59:59.000Z

    the case for building energy-efficiency labels. 3.1 Trendsenergy efficiency. Building energy efficiency labels are anThe use of building energy efficiency labels may be the

  9. GREEN BUILDINGS IN CHALLENGES AND

    E-Print Network [OSTI]

    Delaware, University of

    GREEN BUILDINGS IN DELAWARE: CHALLENGES AND OPPORTUNITIES FINAL REPORT A Renewable Energy-8405 Telefax: (302) 831-3098 Website: http://ceep.udel.edu #12;GREEN BUILDINGS IN DELAWARE: CHALLENGES .......................................................................................................2 2.1. Green Buildings

  10. Building Energy Monitoring and Analysis

    E-Print Network [OSTI]

    Hong, Tianzhen

    2014-01-01T23:59:59.000Z

    Breakdown of Total  Electricty Consumption ? Building A kWh/Breakdown of Total  Electricty Consumption ? Building B kWh/Breakdown of Total   Electricty Consumption ? Building C 

  11. Building Energy Monitoring and Analysis

    E-Print Network [OSTI]

    Hong, Tianzhen

    2014-01-01T23:59:59.000Z

    a future with very low energy buildings resulting in very making  for  low  energy  buildings.   This  project  will and operation of low energy buildings.  Several studies, 

  12. Green Energy Standards for Public Buildings

    Broader source: Energy.gov [DOE]

    In March 2012, West Virginia enacted the Green Buildings Act, which applies to all new construction of public buildings, buildings receiving state grant funds, and buildings receiving state...

  13. Building America Webinar: National Residential Efficiency Measures...

    Energy Savers [EERE]

    Database Webinar Slides Building America Webinar: Saving Energy in Multifamily Buildings Building America Webinar: Retrofit Ventilation Strategies in Multifamily Buildings Webinar...

  14. Building-integrated photovoltaics

    SciTech Connect (OSTI)

    NONE

    1993-01-01T23:59:59.000Z

    This is a study of the issues and opportunities for building-integrated PV products, seen primarily from the perspective of the design community. Although some quantitative analysis is included, and limited interviews are used, the essence of the study is qualitative and subjective. It is intended as an aid to policy makers and members of the technical community in planning and setting priorities for further study and product development. It is important to remember that the success of a product in the building market is not only dependent upon its economic value; the diverse group of building owners, managers, regulators, designers, tenants and users must also find it practical, aesthetically appealing and safe. The report is divided into 11 sections. A discussion of technical and planning considerations is followed by illustrative diagrams of different wall and roof assemblies representing a range of possible PV-integration schemes. Following the diagrams, several of these assemblies are then applied to a conceptual test building which is analyzed for PV performance. Finally, a discussion of mechanical/electrical building products incorporating PVs is followed by a brief surveys of cost issues, market potential and code implications. The scope of this report is such that most of the discussion does not go beyond stating the questions. A more detailed analysis will be necessary to establish the true costs and benefits PVs may provide to buildings, taking into account PV power revenue, construction costs, and hidden costs and benefits to building utility and marketability.

  15. Intervention strategies for energy efficient municipal buildings: Influencing energy decisions throughout buildings` lifetimes

    SciTech Connect (OSTI)

    NONE

    1993-12-31T23:59:59.000Z

    The current energy-related decisionmaking processes that take place during the lifetimes of municipal buildings in San Francisco do not reflect our ideal picture of energy efficiency as a part of staff awareness and standard practice. Two key problems that undermine the success of energy efficiency programs are lost opportunities and incomplete actions. These problems can be caused by technology-related issues, but often the causes are institutional barriers (organizational or procedural {open_quotes}people problems{close_quotes}). Energy efficient decisions are not being made because of a lack of awareness or policy mandate, or because financial resources are not available to decisionmakers. The Bureau of Energy Conservation (BEC) is working to solve such problems in the City & County of San Francisco through the Intervention Strategies project. In the first phase of the project, using the framework of the building lifetime, we learned how energy efficiency in San Francisco municipal buildings can be influenced through delivering services to support decisionmakers; at key points in the process of funding, designing, constructing and maintaining them. The second phase of the project involved choosing and implementing five pilot projects. Through staff interviews, we learned how decisions that impact energy use are made at various levels. We compiled information about city staff and their needs, and resources available to meet those needs. We then designed actions to deliver appropriate services to staff at these key access points. BEC implemented five pilot projects corresponding to various stages in the building`s lifetime. These were: Bond Guidelines, Energy Efficient Design Practices, Commissioning, Motor Efficiency, and Facilities Condition Monitoring Program.

  16. Proceedings of the SPIE, Vol. 3700, April 6-8, 1999. This work was supported by the Assistant Secretary for Energy Efficiency and Renewable Energy, Office of Building

    E-Print Network [OSTI]

    through components of building thermal envelopes. Two thermal chambers maintain steady-state heat flow the barrier between the outdoor weather and conditioned inside space. A building's thermal envelope consists to increase the efficiency of building heating and cooling. Heat flow through the building thermal envelope

  17. BETTER BUILDINGS ALLIANCE

    Office of Energy Efficiency and Renewable Energy (EERE)

    Commercial buildings—our offices, schools, hospitals, restaurants, hotels and stores—consume nearly 20% of all energy used in the United States. We spend more than $200 billion each year to power our country's commercial buildings. Unfortunately, much of this energy and money is wasted; a typical commercial building could save 20% on its energy bills simply by commissioning existing systems so they operate as intended. Energy efficiency is a cost-effective way to save money, support job growth, reduce pollution, and improve competitiveness.

  18. INL Green Building Strategy

    SciTech Connect (OSTI)

    Jennifer Dalton

    2005-05-01T23:59:59.000Z

    Green buildings, also known as sustainable buildings, resource efficient buildings, and high performance buildings, are structures that minimize the impact on the environment by using less energy and water, reducing solid waste and pollutants, and limiting the depletion of natural resources. As Idaho National Laboratory (INL) becomes the nation’s premier nuclear energy research laboratory, the physical infrastructure will be established to help accomplish the mission. This infrastructure, particularly the buildings, should incorporate green design features in order to be environmentally responsible and reflect an image of progressiveness and innovation to the public and prospective employees. With this in mind, the recommendations described in this strategy are intended to form the INL foundation for green building standards. The recommendations in this strategy are broken down into three levels: Baseline Minimum, Leadership in Energy and Environmental Design (LEED)Certification, and Innovative. Baseline Minimum features should be included in all new occupied buildings no matter what the purpose or size. These features do not require significant research, design, or capital costs and yet they can reduce Operation and Maintenance (O&M) costs and produce more environmentally friendly buildings. LEED Certification features are more aggressive than the Baseline Minimums in that they require documentation, studies, and/or additional funding. Combined with the Baseline Minimums, many of the features in this level will need to be implemented to achieve the goal of LEED certification. LEED Silver certification should be the minimum goal for all new buildings (including office buildings, laboratories, cafeterias, and visitor centers) greater than 25,000 square feet or a total cost of $10 million. Innovative features can also contribute to LEED certification, but are less mainstream than those listed in the previous two levels. These features are identified as areas where INL can demonstrate leadership but they could require significant upfront cost, additional studies, and/or development. Appendix A includes a checklist summary of the INL Green Building Strategy that can be used as a tool during the design process when considering which green building features to include. It provides a quick reference for determining which strategies have lower or no increased capital cost, yield lower O&M costs, increase employee productivity, and contribute to LEED certification.

  19. Instantaneous symmetrical components

    E-Print Network [OSTI]

    Salehfar, Hossein

    1984-01-01T23:59:59.000Z

    be traced to Evans and Monseth, who used tham in the detarminaCion of recovery volCages in 1937. Thi- was followed by Pipe's wor'x in 1940 [1]. No systematic approach oased on Che use of inscantaneous symm trical components was not d until Lyon [2...-, pasitive-, &Ojwt i aI(jet) i 2(jwt) = I/3 I a a and negative-sequence components of i (t) ars a 1 ib (t) i (t) (2. 3) The valu s or the phase currents in terms ot the symmacrrcal 10 i 1(jest) ~ l (jet) Zero-time axis i. b1(jm t) iC2(j t) (a...

  20. Solar hot water system installed at Quality Inn, Key West, Florida. Final report

    SciTech Connect (OSTI)

    Not Available

    1980-04-01T23:59:59.000Z

    The solar energy hot water system installed in the Quality Inn, Key West, Florida, which consists of four buildings, is described. Three buildings are low-rise, two-story buildings containing 100 rooms. The fourth is a four-story building with 48 rooms. The solar system was designed to provide approximately 50% of the energy required for the domestic hot water system. The solar system consists of approximately 1400 ft/sup 2/ of flat plate collector, two 500 gal storage tanks, a circulating pump, and a controller. Operation of the system was begun in April 1978, and has continued to date with only three minor interruptions for pump repair. In the first year of operation, it was determined that the use of the solar facility resulted in 40% fuel savings.

  1. Solid state lighting component

    DOE Patents [OSTI]

    Yuan, Thomas; Keller, Bernd; Ibbetson, James; Tarsa, Eric; Negley, Gerald

    2010-10-26T23:59:59.000Z

    An LED component comprising an array of LED chips mounted on a planar surface of a submount with the LED chips capable of emitting light in response to an electrical signal. The LED chips comprise respective groups emitting at different colors of light, with each of the groups interconnected in a series circuit. A lens is included over the LED chips. Other embodiments can comprise thermal spreading structures included integral to the submount and arranged to dissipate heat from the LED chips.

  2. Solid state lighting component

    DOE Patents [OSTI]

    Keller, Bernd; Ibbetson, James; Tarsa, Eric; Negley, Gerald; Yuan, Thomas

    2012-07-10T23:59:59.000Z

    An LED component comprising an array of LED chips mounted on a planar surface of a submount with the LED chips capable of emitting light in response to an electrical signal. The LED chips comprise respective groups emitting at different colors of light, with each of the groups interconnected in a series circuit. A lens is included over the LED chips. Other embodiments can comprise thermal spreading structures included integral to the submount and arranged to dissipate heat from the LED chips.

  3. Injection molded component

    DOE Patents [OSTI]

    James, Allister W; Arrell, Douglas J

    2014-09-30T23:59:59.000Z

    An intermediate component includes a first wall member, a leachable material layer, and a precursor wall member. The first wall member has an outer surface and first connecting structure. The leachable material layer is provided on the first wall member outer surface. The precursor wall member is formed adjacent to the leachable material layer from a metal powder mixed with a binder material, and includes second connecting structure.

  4. Buildings to Grid Integration & Interoperability

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Buildings to Grid Integration & Interoperability Joe Hagerman, Senior Advisor DOE Building Technologies Office March 11, 2013 EERE: Office of Energy Efficiency and Renewable Energy...

  5. Solar Ready Buildings Planning Guide

    SciTech Connect (OSTI)

    Lisell, L.; Tetreault, T.; Watson, A.

    2009-12-01T23:59:59.000Z

    This guide offers a checklist for building design and construction to enable installation of solar photovoltaic and heating systems at some time after the building is constructed.

  6. The Economics of Green Building

    E-Print Network [OSTI]

    Eichholtz, Piet; Kok, Nils; Quigley, John M.

    2010-01-01T23:59:59.000Z

    Even among green buildings, increased energy efficiency isof total returns to energy efficient and green constructionof Energy and Indoor Environment Quality in Green Buildings:

  7. Frederick County- Green Building Program

    Broader source: Energy.gov [DOE]

    Frederick County administers a green building program. It has two goals: (1) to ensure that County building projects implement strategies that enhance environmental performance and fiscal...

  8. Building Random Trees from Blocks

    E-Print Network [OSTI]

    2012-09-18T23:59:59.000Z

    Sep 18, 2012 ... We have a finite collection of unlabeled, rooted, nonplanar building ... We use these as building blocks of an unlabeled, rooted, nonplanar tree.

  9. Chapter 8: Constructing the Building

    Broader source: Energy.gov (indexed) [DOE]

    stormwater management functions. Professional development - Given the increas- ing demand for green buildings, knowledge of the skills needed to deliver these buildings will...

  10. Physical Building Information Modeling for Solar Building Design and Simulation- Annual Report 2012

    E-Print Network [OSTI]

    Yan, W.; Haberl, J.; Clayton, M.; Jeong, W.; Kim, J.; Kota, S.; Alcocer, J.; Dixit, M.

    2012-01-01T23:59:59.000Z

    . 6 Figure 6. Radiance rendering of the wall. c) BIM to BiPV We developed a Building Integrated Photovoltaic (BiPV) prototype in a BIM platform (Autodesk Revit) to calculate solar position and determine the amount of solar insolation from given... as the weather file. ? The room is lifted up from the earth, so the floor slab is not attached to the ground. ? This one room model consists of a roof, a floor, and four walls. ? No windows and doors are installed. ? All building components are made up of a...

  11. Reconciling Components and Services The Apam Component-Service Platform

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Reconciling Components and Services The Apam Component-Service Platform Jacky Estublier, German as with SOC. No platform today satisfies both needs. This paper presents the Component-Service model-service platform. Keywords-Service; CBSE, SOC, SOA, service platform, component platform, adaptability . I

  12. Two Similarity Measure Approaches to Whole Building Fault Diagnosis

    E-Print Network [OSTI]

    Lin, G.; Claridge, D.

    2012-01-01T23:59:59.000Z

    consumption in buildings using similarity measures. The method is referred to as the cosine similarity method if cosine similarity is adopted and is referred to as the Euclidean distance similarity method if Euclidean distance similarity is implemented.... Fig. 1 Block diagram for diagnosing abnormal energy consumption Step 1: Reference Control Change Library Determination Whole building fault diagnosis is different from component level fault diagnosis. It can only give a general clue, for example...

  13. Organic Aerosol Component (OACOMP) Value-Added Product Report

    SciTech Connect (OSTI)

    Fast, J; Zhang, Q; Tilp, A; Shippert, T; Parworth, C; Mei, F

    2013-08-23T23:59:59.000Z

    Significantly improved returns in their aerosol chemistry data can be achieved via the development of a value-added product (VAP) of deriving OA components, called Organic Aerosol Components (OACOMP). OACOMP is primarily based on multivariate analysis of the measured organic mass spectral matrix. The key outputs of OACOMP are the concentration time series and the mass spectra of OA factors that are associated with distinct sources, formation and evolution processes, and physicochemical properties.

  14. Quantification of fossil fuel CO2 emissions at the building/street scale for a large US city

    SciTech Connect (OSTI)

    Gurney, Kevin R.; Razlivanov, I.; Song, Yang; Zhou, Yuyu; Benes, Bedrich; Abdul- Massih, Michel

    2012-08-15T23:59:59.000Z

    In order to advance the scientific understanding of carbon exchange with the land surface, build an effective carbon monitoring system and contribute to quantitatively-based U.S. climate change policy interests, fine spatial and temporal quantification of fossil fuel CO2 emissions, the primary greenhouse gas, is essential. Called the ‘Hestia Project’, this research effort is the first to use bottom-up methods to quantify all fossil fuel CO2 emissions down to the scale of individual buildings, road segments, and industrial/electricity production facilities on an hourly basis for an entire urban landscape. a large city (Indianapolis, Indiana USA). Here, we describe the methods used to quantify the on-site fossil fuel CO2 emissions across the city of Indianapolis, Indiana. This effort combines a series of datasets and simulation tools such as a building energy simulation model, traffic data, power production reporting and local air pollution reporting. The system is general enough to be applied to any large U.S. city and holds tremendous potential as a key component of a carbon monitoring system in addition to enabling efficient greenhouse gas mitigation and planning. We compare our estimate of fossil fuel emissions from natural gas to consumption data provided by the local gas utility. At the zip code level, we achieve a bias adjusted pearson r correlation value of 0.92 (p<0.001).

  15. Personalized building comfort control

    E-Print Network [OSTI]

    Feldmeier, Mark Christopher, 1974-

    2009-01-01T23:59:59.000Z

    Creating an appropriate indoor climate is essential to worker productivity and personal happiness. It is also an area of large expenditure for building owners. And, with rising fuel costs, finding ways of reducing energy ...

  16. Building Energy Efficient Schools

    E-Print Network [OSTI]

    McClure, J. D.; Estes, J. M.

    1985-01-01T23:59:59.000Z

    Many new school buildings consume only half the energy required by similar efficient structures designed without energy performance as a design criterion. These are comfortable and efficient while construction costs remain about the same as those...

  17. BUILDING A STRONG FOUNDATION.

    E-Print Network [OSTI]

    Linsley, Braddock K.

    BUILDING A STRONG FOUNDATION. UALBANY FACTS. Enrollment: 12,822 undergraduates 4,516 graduate ('14-'15): NYS Resident Tuition: $6,170 Non-NYS Resident Tuition: $17,810 Room, Board, and Fees: $15

  18. Building America Report Template

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    January 27 and 28, 2014 Denver, Colorado Prepared for The U.S. Department of Energy's Building America Program Office of Energy Efficiency and Renewable Energy Prepared by Sam...

  19. Visualizing a Living Building

    E-Print Network [OSTI]

    Padget, Steve

    2013-01-01T23:59:59.000Z

    This paper will chronicle the design process of the Odum School of Ecology at the University of Georgia and its objective to accomplish Living BuildingTM certification. In order to accomplish this, the architect (BNIM) and project partners applied...

  20. Building Energy Standards

    Broader source: Energy.gov [DOE]

    The 2015 Vermont Commercial Building Energy Standards (CBES) took effect on March 1, 2015. The code is based on the 2015 IECC, with amendments to incorporate ASHRAE 90.1-2013. The new guidelines ...

  1. High Performance Sustainable Building

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2011-11-09T23:59:59.000Z

    This Guide provides approaches for implementing the High Performance Sustainable Building (HPSB) requirements of DOE Order 413.3B, Program and Project Management for the Acquisition of Capital Assets. Cancels DOE G 413.3-6.

  2. Guam- Building Energy Code

    Broader source: Energy.gov [DOE]

    NOTE: In September 2012, The Guam Building Code Council adopted the draft [http://www.guamenergy.com/outreach-education/guam-tropical-energy-code/ Guam Tropical Energy Code]. It must be adopted by...

  3. Relationships in design build

    E-Print Network [OSTI]

    Wampler, Charles Wilson

    2010-01-01T23:59:59.000Z

    As design build (DB) becomes more popular, different ways of writing contracts and forming relationships with the various parties are being considered. The main point of this paper is to look at the relationships between ...

  4. Building Technologies Office

    Office of Environmental Management (EM)

    energy-efficient solutions Lower building energy use by 50% Double U.S. energy productivity Aiming High for 2030 Annual energy use by 20 quads 1 billion metric tons CO 2 200...

  5. Building Energy Code

    Broader source: Energy.gov [DOE]

    All new residential, commercial, and community-owned buildings constructed on or after January 1, 1992 that recieve financing from the Alaska Housing Finance Corporation (AHFC) must comply with...

  6. Safety in Buildings 

    E-Print Network [OSTI]

    Hutcheon, N. B.

    Building codes are essentially sets of safety regulations in respect of structure, fire, and health. They were originally developed in response to frequently demonstrated hazards of structural collapse, catastrophic fires, ...

  7. Systems building in architecture

    E-Print Network [OSTI]

    Tzannetakis, Charilaos Panayotis

    1983-01-01T23:59:59.000Z

    This work is an inquiry into the interventions of the systems design in the whole building process. At the beginning, three approaches which represent different points of view of interventions in production and use are ...

  8. Wind Tunnel Building - 1 

    E-Print Network [OSTI]

    Unknown

    2005-06-30T23:59:59.000Z

    This paper describes a simple graphic tool that enables a building designer to evaluate the potential for wind induced ventilation cooling in several climate zones. Long term weather data were analyzed to determine the conditions for which available...

  9. Passive solar buildings research

    SciTech Connect (OSTI)

    Balcomb, J.D.

    1992-12-31T23:59:59.000Z

    This chapter covers research advances in passive solar buildings research during the time span from 1982 through 1991. These advances fall within the following categories: (1) short-term energy monitoring, (2) heat transport by natural convection within buildings, and (3) design guidelines and design tools. In short-term energy monitoring, a simulation model of the building is calibrated, based on data taken in a 3-day test. The method accurately predicts performance over an extended period. Heat transport through doorways is characterized for complex situations that arise in passive solar buildings. Simple concepts and models adequately describe the energy transport in many situations of interest. In a new approach, design guidelines are automatically generated for any specific locality. Worksheets or an accompanying computer program allow the designer to quickly and accurately evaluate performance and investigate design alternatives. 29 refs., 19 figs., 2 tabs.

  10. Radiological Laboratory, Utility, Office Building LEED Strategy & Achievement

    SciTech Connect (OSTI)

    Seguin, Nicole R. [Los Alamos National Laboratory

    2012-07-18T23:59:59.000Z

    Missions that the Radiological Laboratory, utility, Office Building (RLUOB) supports are: (1) Nuclear Materials Handling, Processing, and Fabrication; (2) Stockpile Management; (3) Materials and Manufacturing Technologies; (4) Nonproliferation Programs; (5) Waste Management Activities - Environmental Programs; and (6) Materials Disposition. The key capabilities are actinide analytical chemistry and material characterization.

  11. Networks in Buildings: Which Path Environmental Energy Technologies Division

    E-Print Network [OSTI]

    modest use in consumer electronics, security, and large building control systems. The next 20 years markets. Key future networks are lighting, climate control, and security/presence. This paper reviews some, product, or process disclosed, or represents that its use would not infringe privately owned rights

  12. UNECE/FAO Forest Products Annual Market Review, 2007-2008 ___________________________________________________________ 1 Green building drives construction

    E-Print Network [OSTI]

    -2008 ___________________________________________________________ 1 Chapter 10 Green building drives construction market and forest certification: Certified forest of custody (CoC) grew by 50% in 2007, attaining 12,600 certificates worldwide in 2008. · Green building ranked. · Green purchasing policies and public procurement polices remain key drivers for certified

  13. Building-Integrated Photovoltaics (BIPV) in the Residential Sector: An Analysis of Installed Rooftop System Prices

    SciTech Connect (OSTI)

    James, T.; Goodrich, A.; Woodhouse, M.; Margolis, R.; Ong, S.

    2011-11-01T23:59:59.000Z

    For more than 30 years, there have been strong efforts to accelerate the deployment of solar-electric systems by developing photovoltaic (PV) products that are fully integrated with building materials. This report examines the status of building-integrated PV (BIPV), with a focus on the cost drivers of residential rooftop systems, and explores key opportunities and challenges in the marketplace.

  14. High Performance Buildings Database

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    The High Performance Buildings Database is a shared resource for the building industry, a unique central repository of in-depth information and data on high-performance, green building projects across the United States and abroad. The database includes information on the energy use, environmental performance, design process, finances, and other aspects of each project. Members of the design and construction teams are listed, as are sources for additional information. In total, up to twelve screens of detailed information are provided for each project profile. Projects range in size from small single-family homes or tenant fit-outs within buildings to large commercial and institutional buildings and even entire campuses. The database is a data repository as well. A series of Web-based data-entry templates allows anyone to enter information about a building project into the database. Once a project has been submitted, each of the partner organizations can review the entry and choose whether or not to publish that particular project on its own Web site.

  15. Counterfactual quantum key distribution with high efficiency

    SciTech Connect (OSTI)

    Sun Ying [State Key Laboratory of Networking and SwitchingTechnology, Beijing University of Posts and Telecommunications, Beijing 100876 (China); Beijing Electronic Science and Technology Institute, Beijing 100070 (China); Wen Qiaoyan [State Key Laboratory of Networking and SwitchingTechnology, Beijing University of Posts and Telecommunications, Beijing 100876 (China)

    2010-11-15T23:59:59.000Z

    In a counterfactual quantum key distribution scheme, a secret key can be generated merely by transmitting the split vacuum pulses of single particles. We improve the efficiency of the first quantum key distribution scheme based on the counterfactual phenomenon. This scheme not only achieves the same security level as the original one but also has higher efficiency. We also analyze how to achieve the optimal efficiency under various conditions.

  16. A Components Database Design and Implementation for Accelerators and Detectors

    SciTech Connect (OSTI)

    Chan, A.; Meyer, S.; /SLAC

    2011-08-31T23:59:59.000Z

    Many accelerator and detector systems being fabricated for the PEP-II Accelerator and BABAR Detector needed configuration control and calibration measurements tracked for their components. Instead of building a database for each distinct system, a Components Database was designed and implemented that can encompass any type of component and any type of measurement. In this paper we describe this database design that is especially suited for the engineering and fabrication processes of the accelerator and detector environments where there are thousands of unique component types. We give examples of information stored in the Components Database, which includes accelerator configuration, calibration measurements, fabrication history, design specifications, inventory, etc. The World Wide Web interface is used to access the data, and templates are available for international collaborations to collect data off-line.

  17. The Ruskin Building 4.1 Building Condition

    E-Print Network [OSTI]

    Flynn, E. Victor

    39 The Ruskin Building 04 #12;40 4.1 Building Condition TEACHING ROOMS STUDENT ANCILLARY ADMIN First Floor Plan Second Floor Plan Third Floor Plan 4.1 Building Condition This Section provides an overview of the condition of the existing buildings. Below is a series of plans identifying the present

  18. F. MISSION CENTER BUILDING F. MISSION CENTER BUILDING

    E-Print Network [OSTI]

    Mullins, Dyche

    F. MISSION CENTER BUILDING 153 F. MISSION CENTER BUILDING BACKGROUND The 3.06 acre Mission Center Building site is located in the northeast portion of San Francisco's Mission District on the southern half of the block bounded by 14th, Harrison, 15th and Folsom Streets. The site contains a six-story brick building

  19. 3-100.1 Building Evacuation 1 Building Evacuation

    E-Print Network [OSTI]

    Glebov, Leon

    3-100.1 Building Evacuation 1 SUBJECT: Building Evacuation Effective Date: 10-20-10 Policy Number and Safety APPLICABILITY/ACCOUNTABILITY: This policy applies to all individuals in all buildings on all University of Central Florida campuses. BACKGROUND INFORMATION: University buildings occasionally need

  20. Building Knowledge about Buildings Matthew T. Young and Eyal Amir

    E-Print Network [OSTI]

    Amir, Eyal

    Building Knowledge about Buildings Matthew T. Young and Eyal Amir University of Illinois, Urbana The ability to encode information about the structure of buildings is essential for the development of applications which are able to reason about buildings and answer queries concerning their design and function

  1. Building anBuilding an Entrepreneurship ProgramEntrepreneurship Program

    E-Print Network [OSTI]

    Prinz, Friedrich B.

    Building anBuilding an Entrepreneurship ProgramEntrepreneurship Program At Your UniversityAt Your University Tina L. Seelig REE Latin America November 24 - 26, 2004 #12;Question of the Day: How do you build innovation Build networks within our own universities Create relationships with industry Develop

  2. Heavy Water Components Test Reactor Decommissioning - Major Component Removal

    SciTech Connect (OSTI)

    Austin, W.; Brinkley, D.

    2010-05-05T23:59:59.000Z

    The Heavy Water Components Test Reactor (HWCTR) facility (Figure 1) was built in 1961, operated from 1962 to 1964, and is located in the northwest quadrant of the Savannah River Site (SRS) approximately three miles from the site boundary. The HWCTR facility is on high, well-drained ground, about 30 meters above the water table. The HWCTR was a pressurized heavy water test reactor used to develop candidate fuel designs for heavy water power reactors. It was not a defense-related facility like the materials production reactors at SRS. The reactor was moderated with heavy water and was rated at 50 megawatts thermal power. In December of 1964, operations were terminated and the facility was placed in a standby condition as a result of the decision by the U.S. Atomic Energy Commission to redirect research and development work on heavy water power reactors to reactors cooled with organic materials. For about one year, site personnel maintained the facility in a standby status, and then retired the reactor in place. In 1965, fuel assemblies were removed, systems that contained heavy water were drained, fluid piping systems were drained, deenergized and disconnected and the spent fuel basin was drained and dried. The doors of the reactor facility were shut and it wasn't until 10 years later that decommissioning plans were considered and ultimately postponed due to budget constraints. In the early 1990s, DOE began planning to decommission HWCTR again. Yet, in the face of new budget constraints, DOE deferred dismantlement and placed HWCTR in an extended surveillance and maintenance mode. The doors of the reactor facility were welded shut to protect workers and discourage intruders. The $1.6 billion allocation from the American Recovery and Reinvestment Act to SRS for site clean up at SRS has opened the doors to the HWCTR again - this time for final decommissioning. During the lifetime of HWCTR, 36 different fuel assemblies were tested in the facility. Ten of these experienced cladding failures as operational capabilities of the different designs were being established. In addition, numerous spills of heavy water occurred within the facility. Currently, radiation and radioactive contamination levels are low within HWCTR with most of the radioactivity contained within the reactor vessel. There are no known insults to the environment, however with the increasing deterioration of the facility, the possibility exists that contamination could spread outside the facility if it is not decommissioned. An interior panoramic view of the ground floor elevation taken in August 2009 is shown in Figure 2. The foreground shows the transfer coffin followed by the reactor vessel and control rod drive platform in the center. Behind the reactor vessel is the fuel pool. Above the ground level are the polar crane and the emergency deluge tank at the top of the dome. Note the considerable rust and degradation of the components and the interior of the containment building. Alternative studies have concluded that the most environmentally safe, cost effective option for final decommissioning is to remove the reactor vessel, steam generators, and all equipment above grade including the dome. Characterization studies along with transport models have concluded that the remaining below grade equipment that is left in place including the transfer coffin will not contribute any significant contamination to the environment in the future. The below grade space will be grouted in place. A concrete cover will be placed over the remaining footprint and the groundwater will be monitored for an indefinite period to ensure compliance with environmental regulations. The schedule for completion of decommissioning is late FY2011. This paper describes the concepts planned in order to remove the major components including the dome, the reactor vessel (RV), the two steam generators (SG), and relocating the transfer coffin (TC).

  3. The design of energy-responsive commercial buildings

    SciTech Connect (OSTI)

    Ternoey, S.; Bickle, L.; Robbins, C.; Busch, R.; Mc Cord, K.

    1985-01-01T23:59:59.000Z

    This book is a practical guide for building designers who want to reduce the nonrenewable energy needs of commercial and institutional buildings. The book presents, compares, and interprets the most current information on the principles, advantages, and disadvantages of many energy-related design alternatives. Topics considered include reviewing and interpreting our collective learning experience, the range of possible solutions, energy-responsive climate-rejecting buildings, energy-responsive climate-adapted buildings, the range of possible design approaches, a framework for design, a recommended design approach, applying the recommended design approach: examples, the financial value of energy-responsive design, building energy analysis during early design stages, and component energy analysis during early design stages.

  4. Commissioning tools for life-cycle building performance assurance

    SciTech Connect (OSTI)

    Piette, M.A. [Lawrence Berkeley National Lab., CA (United States). Energy and Environment Div.

    1996-05-01T23:59:59.000Z

    This paper discusses information systems for building life-cycle performance analysis and the use of computer-based commissioning tools within this context. There are many reasons why buildings do not perform in practice as well as intended at the design stage. One reason is the lack of commissioning. A second reason is that design intent is not well documented, and performance targets for building components and systems are not well specified. Thus, criteria for defining verification and functional tests is unclear. A third reason is that critical information is often lost throughout the building life-cycle, which causes problems such as misunderstanding of operational characteristics and sequences and reduced overall performance. The life-cycle building performance analysis tools project discussed in this paper are focused on chillers and cooling systems.

  5. The New House of the Region of Hannover - Building Energy Efficient in a Public Private Partnership

    E-Print Network [OSTI]

    Schubert, T.; Plesser, S.

    2008-01-01T23:59:59.000Z

    / 3 91 - 35 84 plesser@igs.bau.tu-bs.de The New House of the Region of Hannover - Building energy Efficient in a Public Private Partnership Topic: Examples of advanced/demonstration buildings Key words: Demonstration building, PPP..., public private partnership, commissioning, energy efficiency, user comfort Public Private Partnerships are an increasingly popular approach to carry out public infra-structure projects. PPPs aim at reducing costs and risk and improving service...

  6. Florida Keys Electric Cooperative- Residential Rebate Program

    Broader source: Energy.gov [DOE]

    Florida Keys Electric Cooperative offers residential members rebates for installing energy efficient measures. To qualify for rebates, members must first call FKEC and make an appointment for a...

  7. Brain Receptor Structures Key to Future Therapeutics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Brain Receptor Structures Key to Future Therapeutics Print With an aging population in America, it is more important than ever to discover ways to treat or prevent diseases...

  8. Prediction of risk-based screening levels for infiltration of volatile subsurface contaminants into buildings

    SciTech Connect (OSTI)

    Hers, I.; Zapf-Gilje, R.; Petrovic, S. [Golder Associates Ltd., Burnaby, British Columbia (Canada); Macfarlane, M.; McLenehan, R. [British Columbia Ministry of Environment, Lands and Parks, Victoria, British Columbia (Canada)

    1997-09-01T23:59:59.000Z

    A Risk-Based Corrective Action (RBCA) approach is increasingly being used for the management of contaminated sites. Fundamental to this approach is the prediction of risk-based screening levels (RBSL) for operable exposure pathways. Screening level models currently used indicate that RBSLs for the indoor inhalation pathway can be significantly lower than other pathways typically considered. This paper presents the results of a screening level spreadsheet model used to predict human health risks resulting from infiltration of volatile organic compounds (VOCs) into buildings. The model was developed to derive RBSLs for soil and groundwater for possible future incorporation into the regulation of contaminated sites in British Columbia. Key features of the semi-analytical VOC infiltration model are steady-state diffusive mass transfer through soil coupled with advective and diffusive mass transfer through a cracked building floor slab or wall, source mass depletion of soil contaminants present using a mass balance approach, and the capability to incorporate multi-component chemical partitioning for soils containing non-aqueous phase liquid (NAPL). The critical factors affecting VOC infiltration and resulting health risks are presented.

  9. BUILDING A RISK MANAGEMENT PLAN BUILDING A RISK MANAGEMENT PL LDING A RISK MANAGEMENT PLAN BUILDING A RISK MANAGEMENT PLAN

    E-Print Network [OSTI]

    Florida, University of

    BUILDING A RISK MANAGEMENT PLAN BUILDING A RISK MANAGEMENT PL LDING A RISK MANAGEMENT PLAN BUILDING A RISK MANAGEMENT PLAN MANAGEMENT PLAN BUILDING A RISK MANAGEMENT PLAN BUILDING A R RISK MANAGEMENT PLAN BUILDING A RISK MANAGEMENT PLAN BUILDIN T PLAN BUILDING A RISK MANAGEMENT PLAN BUILDING A RISK MANAGEM

  10. NANOSTRUCTURED METAL OXIDE CATALYSTS VIA BUILDING BLOCK SYNTHESES

    SciTech Connect (OSTI)

    Craig E. Barnes

    2013-03-05T23:59:59.000Z

    A broadly applicable methodology has been developed to prepare new single site catalysts on silica supports. This methodology requires of three critical components: a rigid building block that will be the main structural and compositional component of the support matrix; a family of linking reagents that will be used to insert active metals into the matrix as well as cross link building blocks into a three dimensional matrix; and a clean coupling reaction that will connect building blocks and linking agents together in a controlled fashion. The final piece of conceptual strategy at the center of this methodology involves dosing the building block with known amounts of linking agents so that the targeted connectivity of a linking center to surrounding building blocks is obtained. Achieving targeted connectivities around catalytically active metals in these building block matrices is a critical element of the strategy by which single site catalysts are obtained. This methodology has been demonstrated with a model system involving only silicon and then with two metal-containing systems (titanium and vanadium). The effect that connectivity has on the reactivity of atomically dispersed titanium sites in silica building block matrices has been investigated in the selective oxidation of phenols to benezoquinones. 2-connected titanium sites are found to be five times as active (i.e. initial turnover frequencies) than 4-connected titanium sites (i.e. framework titanium sites).

  11. CALIFORNIA ENERGY Large HVAC Building

    E-Print Network [OSTI]

    CALIFORNIA ENERGY COMMISSION Large HVAC Building Survey Information Database of Buildings over 100 Energy Systems: Productivity and Building Science Program. This program was funded by the California of Portland Energy Conservation, Inc. Project Management: Cathy Higgins, Program Director for New Buildings

  12. To Collaborative LIfe Sciences Building

    E-Print Network [OSTI]

    To Collaborative LIfe Sciences Building To Professional Development Center Collaborative Life Sciences Building SW MEADE SW PORTER SW M OODY I-5 To Main Campus To South Waterfront I-405 Collaborative Life Sciences Building 0650 SW Meade St. Academic & Student Recreation Center (ASRC) C8 Art Building

  13. Manning building RoyalParade

    E-Print Network [OSTI]

    Sekercioglu, Y. Ahmet

    Manning building (403) MileLane RoyalParade RoyalParade Tram stop No.16Walker Street Scott building (402) Sissons building (401) 399 Royal Parade (404) 381 Royal Parade Cafeteria Cossar Hall Main of Pharmacy and Pharmaceutical Sciences Building 401 G Reception G Student services G Cossar Hall G Sissons

  14. Building Address Locations -Assumes entire

    E-Print Network [OSTI]

    Guenther, Frank

    Building Address Locations - Assumes entire building unless noted Designation Submit through* 560, 4 BU Crosstown Center 801 Massachusetts Ave Floor 1, 2 BMC BCD Building 800 Harrison Avenue BCD BMC Biosquare III 670 Albany Floors 2, 3, 6, 7 BMC Biosquare III 670 Albany Floors 1, 4, 5, 8 BU Building

  15. Building Name Room Support By

    E-Print Network [OSTI]

    Mohaghegh, Shahab

    Building Name Room Technology Classroom? Technology Support By: Phone Number: Contact Name: Agricultural Sciences Building G29 Standard iDC 304-293-2832 n/a Agricultural Sciences Building G31 Standard iDC 304-293-2832 n/a Agricultural Sciences Building G101 Standard iDC 304-293-2832 n/a Agricultural

  16. International Trends in Green Building

    E-Print Network [OSTI]

    Zhang, Junshan

    International Trends in Green Building Friday, August 26, 2011 Registration 8:00 a.m. Presentation, Canada Green Building Council The presentation will cover international trends and innovations in the green-building industry as well as new opportunities for green-building collaboration with Arizona

  17. Building America Building Science Education Roadmap

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: Theof Energy Future of CSP:Brookhaven Teaching FellowsBuilderHVACR BUILDING

  18. Building Technologies Program: Building America Publications

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed off Energy.gov. Are you sure you wantJoin usAcquisitionAlex3EnergyBuilding RemovalProgram HOME

  19. Integrating Renewable Energy Requirements Into Building Energy Codes

    SciTech Connect (OSTI)

    Kaufmann, John R.; Hand, James R.; Halverson, Mark A.

    2011-07-01T23:59:59.000Z

    This report evaluates how and when to best integrate renewable energy requirements into building energy codes. The basic goals were to: (1) provide a rough guide of where we’re going and how to get there; (2) identify key issues that need to be considered, including a discussion of various options with pros and cons, to help inform code deliberations; and (3) to help foster alignment among energy code-development organizations. The authors researched current approaches nationally and internationally, conducted a survey of key stakeholders to solicit input on various approaches, and evaluated the key issues related to integration of renewable energy requirements and various options to address those issues. The report concludes with recommendations and a plan to engage stakeholders. This report does not evaluate whether the use of renewable energy should be required on buildings; that question involves a political decision that is beyond the scope of this report.

  20. Energy use in buildings in a long-term perspective

    SciTech Connect (OSTI)

    Urge-Vorsatz, Diana; Petrichenko, Ksenia; Staniec, Maja; Eom, Jiyong

    2013-06-01T23:59:59.000Z

    Energy services in and related to buildings are responsible for approximately one-third of total global final energy demand and energy-related greenhouse gas emissions. They also contribute to the other key energy-related global sustainability challenges including lack of access to modern energy services, climate change, indoor and outdoor air pollution, related and additional health risks and energy dependence. The aim of this paper is to summarize the main sustainability challenges related to building thermal energy use and to identify the key strategies for how to address these challenges. The paper’s basic premises and results are provided by and updated from the analysis conducted for the Global Energy Assessment: identification of strategies and key solutions; scenario assessment; and the comparison of the results with other models in the literature.

  1. Bradshaw Construction New Office Building

    High Performance Buildings Database

    Eldersburg, MD The New Office Building is part of an effort by Bradshaw Construction Corporation to combine office, off-site shop buildings and off-site storage yards at one consolidated location. The new site, located off Maryland Route 26, shall provide space for an office building and parking; and secured shop building and storage yard. The New Office Building Project has achieved LEED Silver certification. The office building is designed as a free standing building of approximately 8,200 square feet in area, one story in height.

  2. Secure key distribution by swapping quantum entanglement

    SciTech Connect (OSTI)

    Song, Daegene [National Institute of Standards and Technology, 100 Bureau Drive, MS 8910, Gaithersburg, Maryland 20899 (United States)

    2004-03-01T23:59:59.000Z

    We report two key distribution schemes achieved by swapping quantum entanglement. Using two Bell states, two bits of secret key can be shared between two distant parties that play symmetric and equal roles. We also address eavesdropping attacks against the schemes.

  3. On quantum key distribution using ququarts

    SciTech Connect (OSTI)

    Kulik, S. P., E-mail: Sergei.Kulik@gmail.com; Shurupov, A. P. [Moscow State University (Russian Federation)

    2007-05-15T23:59:59.000Z

    A comparative analysis of quantum key distribution protocols using qubits and ququarts as information carriers is presented. Several schemes of incoherent attacks that can be used by an eavesdropper to obtain secret information are considered. The errors induced by the eavesdropper are analyzed for several key distribution protocols.

  4. Blind Source Separation and Independent Component Analysis: Seungjin Choi

    E-Print Network [OSTI]

    Cichocki, Andrzej

    REVIEW Blind Source Separation and Independent Component Analysis: A Review Seungjin Choi, sylee}@kaist.ac.kr (Submitted on October 20, 2004) Abstract - Blind source separation (BSS meaningful coding or blind source estimation. The key issue is to find a such transformation or coding

  5. UNSUPERVISED CLUSTERING FOR FAULT DIAGNOSIS IN NUCLEAR POWER PLANT COMPONENTS

    E-Print Network [OSTI]

    Boyer, Edmond

    1 UNSUPERVISED CLUSTERING FOR FAULT DIAGNOSIS IN NUCLEAR POWER PLANT COMPONENTS Piero Baraldi1 of prototypical behaviors. Its performance is tested with respect to an artificial case study and then applied on transients originated by different faults in the pressurizer of a nuclear power reactor. Key Words: Fault

  6. Community Development Department Building & Safety Division

    E-Print Network [OSTI]

    BUILDING, RESIDENTIAL AND GREEN BUILDING CODES, AMENDING FREMONT MUNICIPAL CODE TITLE vn (BUILDING TO ENERGY REGULATIONS THE 2010 CALIFORNIA,GREEN BUILDING CODE The City of Fremont proposed to adopt local................ Community Development Department Building & Safety Division 39550 Liberty Street

  7. Commercial & Institutional Green Building Performance

    E-Print Network [OSTI]

    Harrison, S.; Mundell,C.; Meline, K.; Kraatz,J.

    2014-01-01T23:59:59.000Z

    Buildings Voluntary Green Building Programs: • LEED www.usgbc.org • Living Building Challenge living-future.org/lbc • Green Globes www.greenglobes.com • WELL Buildings wellbuildinginstitute.com • ENERGY STAR energystar.gov ESL-KT-14...The North Central Branch Texas Public Works Association Commercial & Institutional Green Building Performance 11.19.2014 ESL-KT-14-11-26 CATEE 2014: Clean Air Through Efficiency Conference, Dallas, Texas Nov. 18-20 Q&A Your Presenters: Chris...

  8. Sprayed skin turbine component

    DOE Patents [OSTI]

    Allen, David B

    2013-06-04T23:59:59.000Z

    Fabricating a turbine component (50) by casting a core structure (30), forming an array of pits (24) in an outer surface (32) of the core structure, depositing a transient liquid phase (TLP) material (40) on the outer surface of the core structure, the TLP containing a melting-point depressant, depositing a skin (42) on the outer surface of the core structure over the TLP material, and heating the assembly, thus forming both a diffusion bond and a mechanical interlock between the skin and the core structure. The heating diffuses the melting-point depressant away from the interface. Subsurface cooling channels (35) may be formed by forming grooves (34) in the outer surface of the core structure, filling the grooves with a fugitive filler (36), depositing and bonding the skin (42), then removing the fugitive material.

  9. Precision Cleaning Titanium Components

    SciTech Connect (OSTI)

    Hand, T.E.; Bohnert, G.W.

    2000-02-02T23:59:59.000Z

    Clean bond surfaces are critical to the operation of diffusion bonded titanium engine components. These components can be contaminated with machining coolant, shop dirt, and fingerprints during normal processing and handling. These contaminants must be removed to achieve acceptable bond quality. As environmental concerns become more important in manufacturing, elimination of the use of hazardous materials is desired. For this reason, another process (not using nitric-hydrofluoric acid solution) to clean titanium parts before bonding was sought. Initial cleaning trials were conducted at Honeywell to screen potential cleaning techniques and chemistries. During the initial cleaning process screening phase, Pratt and Whitney provided Honeywell with machined 3 inch x 3 inch x 1 inch titanium test blocks. These test blocks were machined with a water-based machining coolant and exposed to a normal shop environment and handling. (Honeywell sectioned one of these blocks into smaller samples to be used for additional cleanliness verification analyses.) The sample test blocks were ultrasonically cleaned in alkaline solutions and AUGER analysis was used by Honeywell FM and T to validate their cleanliness. This information enabled selection of final cleaning techniques and solutions to be used for the bonding trials. To validate Honeywell's AUGER data and to verify the cleaning processes in actual situations, additional sample blocks were cleaned (using the chosen processes) and then bonded. The bond quality of the test blocks was analyzed according to Pratt and Whitney's requirements. The Charpy impact testing was performed according to ASTM procedure {number_sign}E-23. Bond quality was determined by examining metallographic samples of the bonded test blocks for porosity along the bondline.

  10. Animal Industries Building 

    E-Print Network [OSTI]

    Unknown

    2011-08-17T23:59:59.000Z

    Industrial steam users recognize the need to reduce system cost in order to remain internationally competitive. Steam systems are a key utility that influence cost significantly, and represent a high value opportunity ...

  11. Solar Energy Windows and Smart IR Switchable Building Technologies

    SciTech Connect (OSTI)

    McCarny, James; Kornish, Brian

    2011-09-30T23:59:59.000Z

    The three building envelope functions with the largest impact on the energy usage are illumination, energy flux and energy production. In general, these three functions are addressed separately in the building design. A step change toward a zero-energy building can be achieved with a glazing system that combines these three functions and their control into a single unit. In particular, significant value could be realized if illumination into the building is dynamically controlled such that it occurs during periods of low load on the grid (e.g., morning) to augment illumination supplied by interior lights and then to have that same light diverted to PV energy production and the thermal energy rejected during periods of high load on the grid. The objective of this project is to investigate the feasibility of a glazing unit design that integrates these three key functions (illumination and energy flux control, and power production) into a single module.

  12. A New Generation of Communication Aids under the ULYSSES Component-Based Framework

    E-Print Network [OSTI]

    Kouroupetroglou, Georgios

    -vendor components into low cost products and maximizes modularity and reusability. Following the ULYSSES approach to build user-specific robust communicators out of pre-fabricated software parts. Thus, adding or removing [29] and ATIC [2], [27], [28] component-based approaches have made significant steps towards the new

  13. Consistent Query Answering Of Conjunctive Queries Under Primary Key Constraints

    E-Print Network [OSTI]

    Pema, Enela

    2014-01-01T23:59:59.000Z

    Queries and Primary Key Constraints . . . . . . . . . .of Employee w.r.t. the primary key SSN ? {name, salary} . .query answering under primary keys: a characterization of

  14. Re-Building Greensburg

    ScienceCinema (OSTI)

    Hewitt, Steven; Wallach, Daniel; Peterson, Stephanie;

    2013-05-29T23:59:59.000Z

    Greensburg, KS - A town that was devastated by a tornado in 2007, yet came back to be one of the Nation's most energy-efficient, sustainable communities. Civic leaders and entrepreneurs helped rally residents behind the idea of "greening" Greensburg, inspiring the construction of numerous energy-efficient buildings, some of which generate their own renewable power with solar panels and wind turbines. Many of the town's government buildings use cutting edge energy-saving technologies, saving the local taxpayers' money. Greensburg has demonstrated to the world that any city can reach its energy efficiency and renewable energy goals today using widely available technologies.

  15. Filter Press Building

    E-Print Network [OSTI]

    Bush, W. M.

    " exemplifies the ultimate all-electric application. INTRODUCTION The City of Avon Lake launched a program in 1983 to eKpand and modernize its water pollution control facilities. A part of this expansion was construction of a separate building to house a...? was established as a year-round requirement for both management 585 ESL-IE-86-06-94 Proceedings from the Eighth Annual Industrial Energy Technology Conference, Houston, TX, June 17-19, 1986 ~>-:? ~ Filter Press Building Avon Lake Water Pollution Control...

  16. Bagley University Classroom Building

    High Performance Buildings Database

    Duluth, MN, MN LEED PLATINUM CERTIFIED AND PASSIVHAUS ( certification pending) CLASSROOM BUILDING The Nature Preserve where this building is located is a contiguous natural area, 55 acres in size, deeded to the University in the 1950's for educational and recreational use. The site has hiking trails through old growth hard woods frequented by the university students as well as the public. We were charged with designing a facility to serve eight different departments for the nature portions of their teaching and study at a regional University.

  17. Historic Building Renovations

    Broader source: Energy.gov [DOE]

    When a Federal agency undertakes a renovation to an historic building, the renovation team must consider not only the uses and needs of the facility, but also a range of issues related to historic preservation. Integrating renewable energy such as solar and wind into an historic renovation has been accomplished successfully by agencies; the design and placement of any renewable energy system must be closely integrated with the overall design plans. Any renewable energy additions must maintain the integrity and defining characteristics of the building.

  18. Buildings Performance Database Overview

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the YouTube platformBuilding Removal Ongoing at DOE's PaducahBuildingsEnergy

  19. Commercial Building Partnership

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: Theof"Wave the WhiteNational BroadbandofCommercial Building EnergyBuilding

  20. Building Technologies Office Overview

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the YouTube platformBuilding Removal Ongoing at DOE's Paducah Site BuildingEnergy5

  1. Captured key electrical safety lockout system

    SciTech Connect (OSTI)

    Darimont, Daniel E. (Aurora, IL)

    1995-01-01T23:59:59.000Z

    A safety lockout apparatus for an electrical circuit includes an electrical switch, a key, a lock and a blocking mechanism. The electrical switch is movable between an ON position at which the electrical circuit is energized and an OFF position at which the electrical circuit is deactivated. The lock is adapted to receive the key and is rotatable among a plurality of positions by the key. The key is only insertable and removable when the lock is at a preselected position. The lock is maintained in the preselected position when the key is removed from the lock. The blocking mechanism physically maintains the switch in its OFF position when the key is removed from the lock. The blocking mechanism preferably includes a member driven by the lock between a first position at which the electrical switch is movable between its ON and OFF positions and a second position at which the member physically maintains the electrical switch in its OFF position. Advantageously, the driven member's second position corresponds to the preselected position at which the key can be removed from and inserted into the lock.

  2. Captured key electrical safety lockout system

    DOE Patents [OSTI]

    Darimont, D.E.

    1995-10-31T23:59:59.000Z

    A safety lockout apparatus for an electrical circuit includes an electrical switch, a key, a lock and a blocking mechanism. The electrical switch is movable between an ON position at which the electrical circuit is energized and an OFF position at which the electrical circuit is deactivated. The lock is adapted to receive the key and is rotatable among a plurality of positions by the key. The key is only insertable and removable when the lock is at a preselected position. The lock is maintained in the preselected position when the key is removed from the lock. The blocking mechanism physically maintains the switch in its OFF position when the key is removed from the lock. The blocking mechanism preferably includes a member driven by the lock between a first position at which the electrical switch is movable between its ON and OFF positions and a second position at which the member physically maintains the electrical switch in its OFF position. Advantageously, the driven member`s second position corresponds to the preselected position at which the key can be removed from and inserted into the lock. 7 figs.

  3. Preliminary Findings from an Analysis of Building Energy Information System Technologies

    SciTech Connect (OSTI)

    Granderson, Jessica; Piette, Mary Ann; Ghatikar, Girish; Price, Philip

    2009-06-01T23:59:59.000Z

    Energy information systems comprise software, data acquisition hardware, and communication systems that are intended to provide energy information to building energy and facilities managers, financial managers, and utilities. This technology has been commercially available for over a decade, however recent advances in Internet and other information technology, and analytical features have expanded the number of product options that are available. For example, features such as green house gas tracking, configurable energy analyses and enhanced interoperability are becoming increasingly common. Energy information systems are used in a variety of commercial buildings operations and environments, and can be characterized in a number of ways. Basic elements of these systems include web-based energy monitoring, web-based energy management linked to controls, demand response, and enterprise energy management applications. However the sheer number and variety of available systems complicate the selection of products to match the needs of a given user. In response, a framework was developed to define the capabilities of different types of energy information systems, and was applied to characterize approximately 30 technologies. Measurement is a critical component in managing energy consumption and energy information must be shared at all organizational levels to maintain persistent, efficient operations. Energy information systems are important to understand because they offer the analytical support to process measured data into information, and they provide the informational link between the primary actors who impact building energy efficiency - operators, facilities and energy managers, owners and corporate decision makers. In this paper, preliminary findings are presented, with a focus on overall trends and the general state of the technology. Key conclusions include the need to further pursue standardization and usability, x-y plotting as an under-supported feature, and a general convergence of visualization and display capabilities.

  4. Experimental study of high speed polarization-coding quantum key distribution with sifted-key

    E-Print Network [OSTI]

    and links 1. C. H. Bennet and G. Brassard, "Quantum cryptography: Public key distribution and coin tossing

  5. Hotbox Test R-value Database and the Building Envelopes Program (BEP)

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    The Building Envelopes Program at Oak Ridge National Laboratory (ORNL) is a program within the Buildings Technology Center (BTC), the premier U.S. research facility devoted to developing technologies that improve the energy efficiency and environmental compatibility of residential and commercial buildings. Our program is divided into two parts: building envelope research, which focuses on the structural elements that enclose a building (walls, roofs and foundations), and materials research, which concentrates on the materials within the envelope systems (such as insulation). The building envelope provides the thermal barrier between the indoor and outdoor environment, and its elements are the key determinants of a building's energy requirements that result from the climate where it is located. [copied from http://www.ornl.gov/sci/roofs+walls/

  6. ?-Lactones as Key Building Blocks: Synthetic Applications to Diverse Natural Products

    E-Print Network [OSTI]

    Shirley, Morgan

    2014-06-06T23:59:59.000Z

    cyclopentanes an organocatalyzed tandem Michael aldol-lactonization process is reported. Subsequently revealing conditions for an enantioselective variant generating two C-C bonds, one C-O bond, two rings, and up to three contiguous stereocenters from simple...

  7. NREL builds community and industry support by addressing concerns voiced by key standards organizations.

    E-Print Network [OSTI]

    standards to account for materials with potential to creep. The study tested experimental materials. (February 2012)."Testing Protocol for Module Encapsulant Creep."NREL/PR-5200-54583. http organizations. Photovoltaic (PV) manufacturers in the United States test the safety of their products using

  8. Review of a design-build option

    SciTech Connect (OSTI)

    NONE

    1999-06-01T23:59:59.000Z

    Development of the Nonproliferation and International Security Center (NISC) project was started originally in 1996. The NISC project is to provide 163,375 square feet of laboratory and office space for 465 technical and support staff, The total estimated cost for the facility is about sixty million dollars. DOE has a number of policies and procedures related to the authorization and construction of projects. These policies and procedures generally favor the Design, Bid and Build process. The process include the following key items: (1) Authorization to develop a Conceptual Design Report (CDR); (2) Development of the CDR; (3) Validation of the CDR; (4) Authorization and funding to design the facility; (5) Validation of the design; and (6) Authorization and funding to build the facility. This approach placed the project management team in the position of resolving conflicts between the A/E and the contractor. The project management often also has to resolve conflicts between the facility uses and the A/E and contractor. These activities often distracted from the project management`s main objectives of controlling costs, schedule, and quality assurance. The generally accepted definition of Design-Build is that it is a very condensed process ruled by a single contract between the owner and the design-build team (firm) from the beginning of the project. The main advantages to the design-build approach are single point of responsibility, accurate identification of project costs, faster delivery of facility, improved risk management, and better quality control. Each of these points will be discussed later as related to the NISC project at Los Alamos. Many of these points can be applied to other projects as well.

  9. Automotive Component Product Development Enhancement

    E-Print Network [OSTI]

    of Science in Engineering and Management February 2005 ABSTRACT Automotive industry is facing a tough periodAutomotive Component Product Development Enhancement Through Multi-Attribute System Design Engineering Systems Division #12;Automotive Component Product Development Enhancement Through Multi

  10. A bottom-up engineering estimate of the aggregate heating andcooling loads of the entire U.S. building stock

    SciTech Connect (OSTI)

    Huang, Yu Joe; Brodrick, Jim

    2000-08-01T23:59:59.000Z

    A recently completed project for the U.S. Department of Energy's (DOE) Office of Building Equipment combined DOE-2 results for a large set of prototypical commercial and residential buildings with data from the Energy Information Administration (EIA) residential and commercial energy consumption surveys (RECS, CBECS) to estimate the total heating and cooling loads in U.S. buildings attributable to different shell components such as windows, roofs, walls, etc., internal processes, and space-conditioning systems. This information is useful for estimating the national conservation potentials for DOE's research and market transformation activities in building energy efficiency. The prototypical building descriptions and DOE-2 input files were developed from 1986 to 1992 to provide benchmark hourly building loads for the Gas Research Institute (GRI) and include 112 single-family, 66 multi-family, and 481 commercial building prototypes. The DOE study consisted of two distinct tasks : (1) perform DOE-2 simulations for the prototypical buildings and develop methods to extract the heating and cooling loads attributable to the different building components; and (2) estimate the number of buildings or floor area represented by each prototypical building based on EIA survey information. These building stock data were then multiplied by the simulated component loads to derive aggregated totals by region, vintage, and building type. The heating and cooling energy consumption of the national building stock estimated by this bottom-up engineering approach was found to agree reasonably well with estimates from other sources, although significant differences were found for certain end-uses. The main added value from this study, however, is the insight it provides about the contributing factors behind this energy consumption, and what energy savings can be expected from efficiency improvements for different building components by region, vintage, and building type.

  11. September 11, 2012 NIST Key Management Workshop 2012 Secure Key Storage

    E-Print Network [OSTI]

    September 11, 2012 NIST Key Management Workshop 2012 Secure Key Storage and True Random Number Storage via PUFs - Main Idea - Reliability - Randomness -- InstantiationsInstantiations 3. True Random, including side channel resistance ° Trusted security policy routines ° Secure and authentic key storage

  12. The risk of buildings overheating in a low-carbon climate change future

    E-Print Network [OSTI]

    Banfill, P.F.G.; Jenkins, D.P.; Patidar, S.; Gul, M.; Menzies, G.F.; Gibson, G.J.

    2012-01-01T23:59:59.000Z

    An overheating risk tool that is compatible with building performance simulation software has been developed, using principal component analysis to give a statistically rigorous simplification of the UKCP09 probabilistic climate projections...

  13. Building with passive solar: an application guide for the southern homeowner and builder

    SciTech Connect (OSTI)

    None

    1981-03-01T23:59:59.000Z

    This instructional material was prepared for training workshops for builders and home designers. It includes: fundamental definitions and equations, climate and site studies, building components, passive systems and techniques, and design tools. (MHR)

  14. Assessment of the Energy Rating of Insulated Wall Assemblies - A Step Towards Building Energy Labeling 

    E-Print Network [OSTI]

    Elmahdy, H.; Maref, W.; Saber, H.; Swinton, M.; Glazer, R.

    2010-01-01T23:59:59.000Z

    Considerable efforts are recently focusing on energy labeling of components and systems in buildings. In Canada, the energy rating of windows was established, which provides a protocol to rate different types of windows ...

  15. Partnership Building a Bridge

    E-Print Network [OSTI]

    will accelerate new ideas into clinical treatments for the prevention and cure of cancer. Cancer Research Clinical efficient translation of new discoveries into clinical treatments for the prevention and cure of cancerCancer Research Clinical Partnership Building a Bridge Between Purdue Discovery and Clinical

  16. SUSY Model Building

    E-Print Network [OSTI]

    Stuart Raby

    2007-10-19T23:59:59.000Z

    I review some of the latest directions in supersymmetric model building, focusing on SUSY breaking mechanisms in the minimal supersymmetric standard model [MSSM], the "little" hierarchy and $\\mu$ problems, etc. I then discuss SUSY GUTs and UV completions in string theory.

  17. String Model Building

    E-Print Network [OSTI]

    Stuart Raby

    2009-11-06T23:59:59.000Z

    In this talk I review some recent progress in heterotic and F theory model building. I then consider work in progress attempting to find the F theory dual to a class of heterotic orbifold models which come quite close to the MSSM.

  18. Buildings Energy Efficiency Policy

    E-Print Network [OSTI]

    Oak Ridge National Laboratory

    Efficiency Wind Biomass Natural Gas Combined Cycle Nuclear Coal IGCC Photovoltaics RangeofBuildings Energy Efficiency Policy ­ A Brief History Steven Nadel Executive Director American Council for an Energy- Efficient Economy #12;U.S. Energy Use in Relation to GDP 1970-2008 0.0 50.0 100

  19. Fire in Buildings 

    E-Print Network [OSTI]

    Shorter, G.

    During the lifetime of any building in Canada it is probable that one or more "unwanted" fires will occur. "Fire Loss in Canada, 1959," the report of the Dominion Fire Commissioner, states that for the period 1950-1959 the average number of reported...

  20. Moving Toward Zero Energy Buildings 

    E-Print Network [OSTI]

    Ginsberg, M.

    2008-01-01T23:59:59.000Z

    of Directors U.S. Department of Energy 1000 Independence Avenue, SW Washington, DC 20585 00 12 02/ 5 86 - 12 11 mark.ginsberg@ee.doe.gov Moving Toward Zero Energy Buildings When I began discussing the idea of Zero Energy Buildings in the mid...-1990s, I received sceptical looks and laughter. Today, we are seeing the concept blossom into a large number of buildings throughout the world that are net zero fossil fuel buildings. I use the term zero energy buildings to mean ?buildings...

  1. Moving Toward Zero Energy Buildings

    E-Print Network [OSTI]

    Ginsberg, M.

    2008-01-01T23:59:59.000Z

    -1990s, I received sceptical looks and laughter. Today, we are seeing the concept blossom into a large number of buildings throughout the world that are net zero fossil fuel buildings. I use the term zero energy buildings to mean ?buildings... of Directors U.S. Department of Energy 1000 Independence Avenue, SW Washington, DC 20585 00 12 02/ 5 86 - 12 11 mark.ginsberg@ee.doe.gov Moving Toward Zero Energy Buildings When I began discussing the idea of Zero Energy Buildings in the mid...

  2. Key Implications of the Global Economic Environment

    E-Print Network [OSTI]

    Lansky, Joshua

    Key Implications of the Global Economic Environment For PCT Filings: A Survey of the Issues DMI...............................................................................9 Annex 1: Incentives for Patent Filing: The Analytical Framework...........................11 I-1 Intellectual property, innovation, and economic growth.................................13 2-2 Individual

  3. Extracting secret keys from integrated circuits

    E-Print Network [OSTI]

    Lim, Daihyun, 1976-

    2004-01-01T23:59:59.000Z

    Modern cryptographic protocols are based on the premise that only authorized participants can obtain secret keys and access to information systems. However, various kinds of tampering methods have been devised to extract ...

  4. BACK TO BASICS: YOUR KEYS TO SAFE

    E-Print Network [OSTI]

    Kirschner, Denise

    BACK TO BASICS: YOUR KEYS TO SAFE DRIVING FINE-TUNE THE FUNDAMENTALS DRIVE SAFELY WORK WEEK: FRIDAY an occasional refresher. In fact, most company fleet safety programs emphasize basic skills and defensive

  5. Mutual Dependence for Secret Key Agreement

    E-Print Network [OSTI]

    Chan, Chung

    A mutual dependence expression is established for the secret key agreement problem when all users are active. In certain source networks, the expression can be interpreted as certain notions of connectivity and network ...

  6. Funding Opportunity Webinar- Buildings University Innovators and Leaders Development (BUILD)

    Broader source: Energy.gov [DOE]

    This webinar provides an overview of the “Buildings University Innovators and Leaders Development (BUILD)” Funding Opportunity Announcement, DE-FOA-0001167. The webinar was originally presented on November 19, 2014.

  7. City of Bloomington- Green Building Requirements for Municipal Buildings

    Broader source: Energy.gov [DOE]

    In March 2009, the City of Bloomington passed an ordinance establishing the Green Buildings Program. It requires that all new construction and major renovations of city buildings be built to...

  8. Santa Clara County- Green Building Policy for County Government Buildings

    Broader source: Energy.gov [DOE]

    In February 2006, the Santa Clara County Board of Supervisors approved a Green Building Policy for all county-owned or leased buildings. The standards were revised again in September 2009.

  9. New York City- Green Building Requirements for Municipal Buildings

    Broader source: Energy.gov [DOE]

    In 2005 New York City passed a law (Local Law No. 86) making a variety of green building and energy efficiency requirements for municipal buildings and other projects funded with money from the...

  10. Building America Webinar: Building America Technology-to-Market...

    Broader source: Energy.gov (indexed) [DOE]

    7, 2015 3:00PM to 4:30PM EDT This free webinar will introduce the integrated Building America Technology-to-Market Roadmaps that will serve as a guide for Building America's...

  11. Revisit of Energy Use and Technologies of High Performance Buildings

    E-Print Network [OSTI]

    Li Ph.D., Cheng

    2014-01-01T23:59:59.000Z

    Energy performance of LEED for new construction buildings:New Buildings Institute.New Buildings Institute. 2013. Buildings database, http://

  12. Improving Building Performance at Urban Scale with a Framework for

    E-Print Network [OSTI]

    to reduce energy use in neighboring buildings by providing three components: a database for accessing past and present weather data from high quality weather stations; a network for communicating energy- saving Energy Technologies Division June 2013 This work was supported by the Assistant Secretary for Energy

  13. 44 Market St - Refurbishment of a Dual Duct Building 

    E-Print Network [OSTI]

    Bannister, P.; Foo, G.

    2013-01-01T23:59:59.000Z

    occupancy was 2 stars without Green Power. This paper describes the process of refurbishing the building including: Modifications to convert the air conditioning system to a variable volume dual duct system, re-using many of the components of the original...

  14. Final Technical Report - Center for Technology for Advanced Scientific Component Software (TASCS)

    SciTech Connect (OSTI)

    Sussman, Alan [University of Maryland

    2014-10-21T23:59:59.000Z

    This is a final technical report for the University of Maryland work in the SciDAC Center for Technology for Advanced Scientific Component Software (TASCS). The Maryland work focused on software tools for coupling parallel software components built using the Common Component Architecture (CCA) APIs. Those tools are based on the Maryland InterComm software framework that has been used in multiple computational science applications to build large-scale simulations of complex physical systems that employ multiple separately developed codes.

  15. Multipartite secret key distillation and bound entanglement

    E-Print Network [OSTI]

    Remigiusz Augusiak; Pawel Horodecki

    2009-09-25T23:59:59.000Z

    Recently it has been shown that quantum cryptography beyond pure entanglement distillation is possible and a paradigm for the associated protocols has been established. Here we systematically generalize the whole paradigm to the multipartite scenario. We provide constructions of new classes of multipartite bound entangled states, i.e., those with underlying twisted GHZ structure and nonzero distillable cryptographic key. We quantitatively estimate the key from below with help of the privacy squeezing technique.

  16. Multipartite secret key distillation and bound entanglement

    SciTech Connect (OSTI)

    Augusiak, Remigiusz; Horodecki, Pawel [Faculty of Applied Physics and Mathematics, Gdansk University of Technology, Narutowicza 11/12, 80-952 Gdansk (Poland) and ICFO-Institute Ciencies Fotoniques, Mediterranean Technology Park, 08860 Castelldefels (Barcelona) (Spain); Faculty of Applied Physics and Mathematics, Gdansk University of Technology, Narutowicza 11/12, 80-952 Gdansk (Poland)

    2009-10-15T23:59:59.000Z

    Recently it has been shown that quantum cryptography beyond pure entanglement distillation is possible and a paradigm for the associated protocols has been established. Here we systematically generalize the whole paradigm to the multipartite scenario. We provide constructions of new classes of multipartite bound entangled states, i.e., those with underlying twisted Greenberger-Horne-Zeilinger (GHZ) structure and nonzero distillable cryptographic key. We quantitatively estimate the key from below with the help of the privacy squeezing technique.

  17. Expert Meeting Report: Key Innovations for Adding Energy Efficiency to Maintenance Projects

    SciTech Connect (OSTI)

    Wood, A.; Wiehagen, J.

    2012-09-01T23:59:59.000Z

    This report describes an expert meeting hosted by the Building America research team NAHB Research Center, which was held on February 8, 2012, in Orlando, Florida. The topic, Key Innovations for Adding Energy Efficiency to Maintenance Projects, was intended to provide direction to more focused efforts to increase the efficiency of existing homes; in this meeting, the focus was specifically for re-roofing and the opportunities for adding energy efficiency upgrades during this major home repair activity.

  18. Deactivation of Building 7602

    SciTech Connect (OSTI)

    Yook, H.R.; Barnett, J.R.; Collins, T.L. [and others

    1995-10-01T23:59:59.000Z

    The Department of Energy (DOE) has sponsored research and development programs in Building 7602 at Oak Ridge National Laboratory (ORNL) since 1984. This work focused on development of advanced technology for processing nuclear fuels. Building 7602 was used for engineering-scale tests using depleted and natural uranium to simulate the nuclear fuel. In April 1994 the DOE Office of Nuclear Energy (NE) sent supplemental FY 1994 guidance to ORNL stating that in FY 1995 and beyond, Building 7602 is considered surplus to NE programs and missions and shall be shut down (deactivated) and maintained in a radiologically and industrially safe condition with minimal surveillance and maintenance (S&M). DOE-NE subsequently provided FY 1995 funding to support the deactivation activities. Deactivation of Building 7602 was initiated on October 1, 1994. The principal activity during the first quarter of FY 1995 was removal of process materials (chemicals and uranium) from the systems. The process systems were operated to achieve chemical solution concentrations needed for reuse or disposal of the solutions prior to removal of the materials from the systems. During this phase of deactivation the process materials processed and removed were: (1) Uranyl nitrate solution 30,178 L containing 4490 kg of uranium; (2) Nitric acid (neutralized) 9850 L containing less than 0.013 kg of uranium; (3) Organic solution 3346 L containing 265 kg of uranium; (4) Uranium oxide powder 95 kg; and (5) Miscellaneous chemicals. At the end of December 1994, the process systems and control systems were shut down and deactivated. Disposition of the process materials removed from the process systems in Building 7602 proved to be the most difficult part of the deactivation. An operational stand down and funding reductions at Y-12 prevented planned conversion of the uranyl nitrate solution to depleted uranium oxide powder. This led to disposal of the uranyl nitrate solution as waste.

  19. Influence of concrete fracture on the rain infiltration and thermal performance of building facades

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    of the occupants. Over time, the pore structure of such materials may however be altered by cracks and defects for the purpose of durability assessments as well. Keywords heat; moisture; modelling; building material; fracture is to be accounted for in any long-term performance assessment. Hygrothermal simulations of building components

  20. Model for Naturally Ventilated Cavities on the Exteriors of Opaque Building Thermal Envelopes

    SciTech Connect (OSTI)

    Griffith, B.

    2006-11-01T23:59:59.000Z

    This paper describes a model for naturally ventilated cavities on the exterior of opaque building thermal envelopes that are formed by the presence of a lightweight baffle. The model can be used for building components that are slightly detached from the main envelope (but do not connect to the interior).

  1. Revision Date: 8/29/11 ETME 425 -Building Systems Fall 2011

    E-Print Network [OSTI]

    Dyer, Bill

    system integration. Incorporate the elements (pumps, fans, compressors, heat exchangers, heaters. HVAC Equipment 10. Sanitary Venting and Draining 3. Heat Loss and Heat Gain 7. Building Water Supply in modern buildings - including system selection, heating and cooling load calculations, component selection

  2. Mesh component design and software integration within SUMAA3d.

    SciTech Connect (OSTI)

    Freitag, L.

    1999-01-13T23:59:59.000Z

    The requirements of distributed-memory applications that use mesh management software tools are diverse, and building software that meets these requirements represents a considerable challenge. In this paper we discuss design requirements for a general, component approach for mesh management for use within the context of solving PDE applications on parallel computers. We describe recent efforts with the SUMAA3d package motivated by a component-based approach and show how these efforts have considerably improved both the flexibility and the usability of this software.

  3. Effects of a Highway Improvement Project on Florida key Deer

    E-Print Network [OSTI]

    Parker, Israel D.; Braden, Anthony W.; Lopez, Roel R.; Silvy, Nova J.; Davis, Donald S.; Owen, Catherine B.

    2007-01-01T23:59:59.000Z

    the primary inter-island roadway in the Florida Keys. DVCsprimary source of mortality for the endangered Florida Key

  4. Secure key generation using an ultra-long fiber laser: transient analysis and experiment

    E-Print Network [OSTI]

    Zadok, Avinoam

    Secure key generation using an ultra-long fiber laser: transient analysis and experiment Avi Zadok-optic components. In our Ultra-long Fiber Laser (UFL) system, each user places a randomly chosen, spectrally, based on establishing laser oscillation between two parties, which is realized using standard fiber

  5. CSP Component Research and Development | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative FuelsNovember 13, 2014 Building America Update -CompositesCEMICHP2,Component Research

  6. Advanced, Integrated Control for Building Operations to Achieve 40% Energy Saving

    SciTech Connect (OSTI)

    Dr. Zhen Song, Prof. Vivian Loftness, Dr. Kun Ji, Dr. Sam Zheng, Mr. Bertrand Lasternas, Ms. Flore Marion, Mr. Yuebin Yu

    2012-10-15T23:59:59.000Z

    we developed and demonstrated a software based integrated advanced building control platform called Smart Energy Box (SEB), which can coordinate building subsystem controls, integrate variety of energy optimization algorithms and provide proactive and collaborative energy management and control for building operations using weather and occupancy information. The integrated control system is a low cost solution and also features: Scalable component based architecture allows to build a solution for different building control system configurations with needed components; Open Architecture with a central data repository for data exchange among runtime components; Extendible to accommodate variety of communication protocols. Optimal building control for central loads, distributed loads and onsite energy resource Uses web server as a loosely coupled way to engage both building operators and building occupants in collaboration for energy conservation. Based on the open platform of SEB, we have investigated and evaluated a variety of operation and energy saving control strategies on Carnegie Mellon University Intelligent Work place which is equipped with alternative cooling/heating/ventilation/lighting methods, including radiant mullions, radiant cooling/heating ceiling panels, cool waves, dedicated ventilation unit, motorized window and blinds, and external louvers. Based on the validation results of these control strategies, they were integrated in SEB in a collaborative and dynamic way. This advanced control system was programmed and computer tested with a model of the Intelligent Workplaceâ??s northern section (IWn). The advanced control program was then installed in the IWn control system; the performance were measured and compared with that of the state of the art control system to verify the overall energy savings great than 40%. In addition advanced human machine interfaces (HMI's) were developed to communicate both with building occupants and the building operator. Lifecycle cost analyses of the advanced building control were performed, and a Building Control System Guide was prepared and published to inform owners, architects, and engineers dealing with new construction or renovation of buildings.

  7. Framework for Building Design Recyclability

    E-Print Network [OSTI]

    Zhang, Fan

    2008-01-01T23:59:59.000Z

    Recycling of building materials is an important aspect of sustainable construction, while sustainable construction is a critical issue to fulfill overall sustainable development. Researchers have proved that building materials recycling...

  8. Riverside County- Sustainable Building Policy

    Broader source: Energy.gov [DOE]

    In February 2009, the County of Riverside Board of Supervisors adopted Policy Number H-29, creating the Sustainable Building Policy. The Policy requires that all new county building projects...

  9. Nevada Energy Code for Buildings

    Broader source: Energy.gov [DOE]

    ''Much of the information presented in this summary is drawn from the U.S. Department of Energy’s (DOE) Building Energy Codes Program and the Building Codes Assistance Project (BCAP). For more...

  10. Broward County- Green Building Policy

    Broader source: Energy.gov [DOE]

    In October 2008, Board of County Commissioners of Broward County passed a resolution creating the County Green Building Policy. All new County-owned and operated buildings must achieve a minimum...

  11. Building Energy Monitoring and Analysis

    E-Print Network [OSTI]

    Hong, Tianzhen

    2014-01-01T23:59:59.000Z

    HVAC consumes more electricity in September, the daily trendsHVAC Equipment Figure 44 Building 2 typical weekday electricity consumption trendHVAC Equipment Figure 45 Building 2 typical weekend electricity consumption trend

  12. Local Option- Green Building Incentives

    Broader source: Energy.gov [DOE]

    To encourage sustainable building practices, North Carolina law allows all counties and cities to provide reductions or partial rebates for building permit fees. To qualify for a fee reduction,...

  13. LAB #6 The Swaying Building

    E-Print Network [OSTI]

    2007-02-21T23:59:59.000Z

    differential equations that model the swaying of a building. Let y(t) be a measure of how far the building is bent- the displacement (in meters) of the top of the ...

  14. Energy Standards for State Buildings

    Broader source: Energy.gov [DOE]

    The State is still required by statute to adopt planning and construction standards for state buildings that conserve energy and optimize the energy performance of new buildings. The standards mu...

  15. Commercial Building Codes and Standards

    Broader source: Energy.gov [DOE]

    Once an energy-efficient technology or practice is widely available in the market, it can become the baseline of performance through building energy codes and equipment standards. The Building...

  16. Building Commissioning in the USA 

    E-Print Network [OSTI]

    Castro, N.; Friedman, H.

    2006-01-01T23:59:59.000Z

    Building Commissioning in the USA Natascha Castro, Annex 47- US Team Leader National Institute of Standards and Technology Hannah Friedman, Cost-Benefit Subtask Leader Portland Energy Conservation, Inc. Asian Pacific Conference on Building...

  17. Development of Building Automation and Control Systems

    E-Print Network [OSTI]

    Yang, Yang; Zhu, Qi; Maasoumy, Mehdi; Sangiovanni-Vincentelli, Alberto

    2012-01-01T23:59:59.000Z

    A design flow for building automation and control systems,’’Development of Building Automation and Control Systems Yangdesign of the build- ing automation system (including the

  18. Energy Department Issues Green Building Certification System...

    Office of Environmental Management (EM)

    Issues Green Building Certification System Final Rule to Support Increased Energy Measurement and Efficient Building Design Energy Department Issues Green Building Certification...

  19. Revealing myths about people, energy and buildings

    E-Print Network [OSTI]

    Diamond, R.

    2011-01-01T23:59:59.000Z

    Myths about People, Energy and Buildings Rick Diamond andmyths about people, energy and buildings are current today?myths about people, energy and buildings? Who tells these

  20. Retrofit Ventilation Strategies in Multifamily Buildings Webinar...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Retrofit Ventilation Strategies in Multifamily Buildings Webinar Retrofit Ventilation Strategies in Multifamily Buildings Webinar Slides from the Building America webinar on...

  1. Sustainable Buildings and Infrastructure | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sustainable Buildings Implementation Plan DOE Sustainable Buildings and Campuses USGBC Roadmap to Sustainable Government Buildings DOE Greening Federal Facilities, Resource Guide...

  2. Southeast Energy Efficiency Alliance's Building Energy Codes...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Southeast Energy Efficiency Alliance's Building Energy Codes Project Southeast Energy Efficiency Alliance's Building Energy Codes Project Building Codes Project for the 2013...

  3. Building Energy Data Exchange Specification Scoping Report |...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building Energy Data Exchange Specification Scoping Report Building Energy Data Exchange Specification Scoping Report The Building Energy Data Exchange Specification (BEDES),...

  4. Energy Sciences Building | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Video Argonne's Energy Sciences Building Energy Sciences Building The Energy Sciences Building is a world-class scientific facility and a shining example of sustainable design....

  5. Special announcement: Building 9731 shines again

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Special announcement: Building 9731 shines again Over the past several weeks, concentrated activity in and around Building 9731, the first building completed at Y-12 and the...

  6. Smart Buildings: Business Case and Action Plan

    E-Print Network [OSTI]

    Ehrlich, Paul

    2009-01-01T23:59:59.000Z

    from Smart Building strategies: Improved energy efficiencySmart Buildings benefits fall into three categories: Improved energy efficiency1. Achieve Energy Efficiency Mandates. Use Smart Building

  7. commercial buildings initiative | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Commercial Buildings Initiative The DOE Building Technologies Office works with the commercial building industry to accelerate the use of energy efficiency technologies in both...

  8. Green Libraries Are More Than Just Buildings

    E-Print Network [OSTI]

    Aulisio, George J.

    2013-01-01T23:59:59.000Z

    France: UNESCO. U.S. Green Building Council (USGBC). (internationally recognized green building program. Retrievednecessarily entail a green building, but it does involve a

  9. NREL: Buildings Research - Webinar Rescheduled: Material Handling...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    attend this webinar. Printable Version Buildings Research Home Commercial Buildings Residential Buildings Facilities Working with Us Publications News Did you find what you...

  10. Building Energy Information Systems: User Case Studies

    E-Print Network [OSTI]

    Granderson, Jessica

    2010-01-01T23:59:59.000Z

    energy and building automation systems. Lilburn, GA:providers' use of building automation systems (BAS), orweb- based building control and automation systems and their

  11. Model Predictive Control for Energy Efficient Buildings

    E-Print Network [OSTI]

    Ma, Yudong

    2012-01-01T23:59:59.000Z

    more sophisticated building automation systems and buildingthrough the building automation system “Automated Logic Websystem. ALC is a building automation system, offering a user

  12. Development of Building Automation and Control Systems

    E-Print Network [OSTI]

    Yang, Yang; Zhu, Qi; Maasoumy, Mehdi; Sangiovanni-Vincentelli, Alberto

    2012-01-01T23:59:59.000Z

    design flow for building automation systems that focuses onflow for building automation and control systems,’’ in Proc.Development of Building Automation and Control Systems Yang

  13. Commercial Buildings Integration | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    types of commercial buildings. Read more DOE Invests 6 Million to Support Commercial Building Efficiency DOE Invests 6 Million to Support Commercial Building Efficiency These...

  14. Rating the energy performance of buildings

    E-Print Network [OSTI]

    Olofsson, Thomas; Meier, Alan; Lamberts, Roberto

    2004-01-01T23:59:59.000Z

    Energy and Sustainable Buildings, 2004 Available at http://Energy and Sustainable Buildings, Vol. 3, (2004), Olofsson,for a commercial office building in Melbourne, Australia,

  15. Occupant satisfaction in mixed-mode buildings.

    E-Print Network [OSTI]

    Brager, Gail; Baker, Lindsay

    2008-01-01T23:59:59.000Z

    Strategies for Mixed-Mode Buildings, Summary Report, CenterCBE). 2006. Website: Mixed-Mode Building Case Studies.Department of Environmental Building Research Establishment

  16. Online map of buildings using radiant technologies

    E-Print Network [OSTI]

    Karmann, Caroline; Schiavon, Stefano; Bauman, Fred

    2014-01-01T23:59:59.000Z

    of radiant slab cooling using building simulation and fieldmeasurements. Energy and Buildings, 41, 3, 320-330.2013) Net-Zero Energy Buildings - Worldwide. Available at:

  17. Tobacco Policy in Municipal Buildings, 2001

    E-Print Network [OSTI]

    Department of Population Health Sciences Center for Health Policy and Program Evaluation,

    2002-01-01T23:59:59.000Z

    WINNEBAGO County Banned in all buildings Cities County WOODCounty Banned in all buildings WOOD Cities MENASHA NEENAHBanned in some but not all buildings County ARPIN AUBURNDALE

  18. Automated Continuous Commissioning of Commercial Buildings

    E-Print Network [OSTI]

    Bailey, Trevor

    2013-01-01T23:59:59.000Z

    P. “Real Time Model-based Energy Diagnostics in Buildings. ”Proc. Building Simulation ’11, Sydney, Australia, Novemberhttp://www.eere.energy.gov/buildings/energyplus/. 7. http://

  19. Occupant satisfaction in mixed-mode buildings

    E-Print Network [OSTI]

    Brager, Gail; Baker, Lindsay

    2009-01-01T23:59:59.000Z

    Environmental Quality in Green Buildings”. Indoor Air; 14 (Strategies for Mixed-Mode Buildings, Summary Report, CenterCBE). 2006. Website: Mixed-Mode Building Case Studies.

  20. Strategies for Demand Response in Commercial Buildings

    E-Print Network [OSTI]

    Watson, David S.; Kiliccote, Sila; Motegi, Naoya; Piette, Mary Ann

    2006-01-01T23:59:59.000Z

    Strategies for Demand Response in Commercial Buildings DavidStrategies for Demand Response in Commercial Buildings Davidadjusted for demand response in commercial buildings. The

  1. PROGRESS IN ENERGY EFFICIENT BUILDINGS

    E-Print Network [OSTI]

    Wall, L.W.

    2009-01-01T23:59:59.000Z

    cooling, and lighting using passive systems, and optimal building design strategies to realize that potential. ASSESSMENT OF PROGRESS-

  2. Hawaii-Okinawa Building Evaluations

    SciTech Connect (OSTI)

    Metzger, I.; Salasovich, J.

    2013-05-01T23:59:59.000Z

    NREL conducted energy evaluations at the Itoman City Hall building in Itoman, Okinawa Prefecture, Japan, and the Hawaii State Capitol building in Honolulu, Hawaii. This report summarizes the findings from the evaluations, including the best practices identified at each site and opportunities for improving energy efficiency and renewable energy. The findings from this evaluation are intended to inform energy efficient building design, energy efficiency technology, and management protocols for buildings in subtropical climates.

  3. Commercial Building Funding Opportunity Webinar

    Broader source: Energy.gov [DOE]

    This webinar provide an overview of the Commercial Building Technology Demonstrations Funding Opportunity Announcement DE-FOA-0001084.

  4. Connected Buildings Interoperability Vision Webinar

    Broader source: Energy.gov [DOE]

    Connected Buildings Interoperability Vision Webinar slides, by Kevin Lynn, U.S. Department of Energy, May 20, 2015.

  5. Farm Buildings Pocketbook in Metric 

    E-Print Network [OSTI]

    Anonymous

    1971-01-01T23:59:59.000Z

    Some useful advice giving standards, dimensions and data in metric for those interested in the design of farm buildings

  6. Building wall heat flux calculations

    SciTech Connect (OSTI)

    Park, J.E.; Kirkpatrick, J.R.; Tunstall, J.N.; Childs, K.W.

    1987-06-01T23:59:59.000Z

    Calculations of the heat transfer through the standard stud wall structure of a residential building are described. The wall cavity contains no insulation. Four of the five test cases represent progressively more complicated approximations to the heat transfer through and within a hollow wall structure. The fifth adds the model components necessary to severely inhibit the radiative energy transport across the empty cavity. Flow within the wall cavity is calculated from the Navier-Stokes equations and the energy conservation equation for an ideal gas using the Implicit Compressible Eulerian (ICE) algorithm. The fluid flow calculation is coupled to the radiation-conduction model for the solid portions of the system. Conduction through sill plates is about 4% of the total heat transferred through a composite wall. All of the other model elements (conduction through wall board, sheathing, and siding; convection from siding and wallboard to ambients; and radiation across the wall cavity) are required to accurately predict the heat transfer through a wall. Addition of a foil liner on one inner surface of the wall cavity reduces the total heat transferred by almost 50%.

  7. May 28, 2009 Smart Buildings

    E-Print Network [OSTI]

    May 28, 2009 Smart Buildings: Business Case and Action Plan Paul Ehrlich1 and Rick Diamond2 1 of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231. #12;Smart Buildings: Business Case Contract No. DE-AC02-05CH11231. GSA Smart Buildings Report Page ii April 8, 2009 #12;Acknowledgements

  8. Buildings Events | Department of Energy

    Energy Savers [EERE]

    Webinar: Building America Technology-to-Market Roadmaps 3:00PM to 4:30PM EDT Zero Energy Buildings: What are they and how do we build them? 3:00PM to 4:00PM EDT Residential Energy...

  9. 2008 BUILDING ENERGY EFFICIENCY STANDARDS

    E-Print Network [OSTI]

    2008 BUILDING ENERGY EFFICIENCY STANDARDS C A L I F O R N I A E N E RGY CO M M I S S I O N Buildings and Appliances Office #12;Acknowledgments The Building Energy Efficiency Standards (Standards and consultants. Valerie Hall, Deputy Director of the Energy Efficiency and Renewable Division provided policy

  10. Going for "Green" Sustainable Building

    E-Print Network [OSTI]

    Going for "Green" Sustainable Building Certification Statistics Europe Status May 2011 rics.org/sustainability #12;Sustainable Building Certification Statistics Europe Foreword Investors are increasingly the usefulness of sustainability certificates in mainstreaming the uptake of so-called `green' buildings across

  11. BUILDING STRONGSM 2008 AFEP Preliminary

    E-Print Network [OSTI]

    BUILDING STRONGSM 1 2008 AFEP Preliminary Research Results Northwest Power and Conservation Council Meeting March 2009 Boise, ID #12;BUILDING STRONGSM 2 Focus Today · Anadromous Fish Evaluation Program Purpose · Juvenile Fish Passage · Adult Fish · Predation ­ Avian ­ Pinniped · Lamprey #12;BUILDING

  12. Introduction to Green Building & LEED

    E-Print Network [OSTI]

    Zaferatos, Nicholas C.

    Introduction to Green Building & LEED Alistair Jackson Principal O'Brien & Company alistair ­ Green Building Standard · MLS Listing Service #12;#12;#12;#12;#12;#12;#12;#12 of existing infrastructure and provides a foundation for high performance green buildings · Integrated

  13. SUSY GUT Model Building

    E-Print Network [OSTI]

    Stuart Raby

    2008-08-27T23:59:59.000Z

    I discuss an evolution of SUSY GUT model building, starting with the construction of 4d GUTs, to orbifold GUTs and finally to orbifold GUTs within the heterotic string. This evolution is an attempt to obtain realistic string models, perhaps relevant for the LHC. This review is in memory of the sudden loss of Julius Wess, a leader in the field, who will be sorely missed.

  14. Anomaly for Model Building

    E-Print Network [OSTI]

    Utpal Sarkar

    2006-06-19T23:59:59.000Z

    A simple algorithm to calculate the group theory factor entering in anomalies at four and six dimensions for SU(N) and SO(N) groups in terms of the Casimir invariants of their subgroups is presented. Explicit examples of some of the lower dimensional representations of $SU(n), n \\leq 5$ and SO(10) groups are presented, which could be used for model building in four and six dimensions.

  15. Buildings of the Future

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy (DOE) and the Pacific Northwest National Laboratory are developing a vision for future buildings—at least one hundred years from today—based on the collective views of thought leaders. As part of this effort, we will explore technology and demographic trends that could revolutionize the built environment across energy, water, environment, resilient design, health, security, and productivity.

  16. Building and Buildings, Scotland: The Building Standards Advisory Committee (Scotland) Regulations, 1959 

    E-Print Network [OSTI]

    Maclay, John.S.

    1959-01-01T23:59:59.000Z

    These regulations make provision for the constitution and procedure of the Building Standards Advisory Committee which the Secretary of State is required to appoint under section 12 of the Building (Scotland) Act, 1959

  17. Ceramic Component Development Process Analysis

    SciTech Connect (OSTI)

    Boss, D.; Sambasivan, S.; Kuehmann, C. [Northwestern Univ., Evanston, IL (United States). Basic Industrial Research Lab.; Faber, K. [Northwestern University, MEAS Materials Science & Engineering, Evanston, IL (United States)

    1996-12-31T23:59:59.000Z

    The development of ceramic components and coatings is critical to the demonstration of advanced fossil energy systems. Ceramic components and coating will play critical role in hot-gas filtration, high- temperature heat exchangers, thermal barrier coatings, and the hot- section of turbines. Continuous-fiber composites (CFCC) are expected to play an increasing role in these applications. This program encompassed five technical areas related to ceramic component development for fossil energy systems.

  18. Quantum key distribution with finite resources: Secret key rates via Renyi entropies

    SciTech Connect (OSTI)

    Abruzzo, Silvestre; Kampermann, Hermann; Mertz, Markus; Bruss, Dagmar [Institute for Theoretical Physics III, Heinrich-Heine-universitaet Duesseldorf, D-40225 Duesseldorf (Germany)

    2011-09-15T23:59:59.000Z

    A realistic quantum key distribution (QKD) protocol necessarily deals with finite resources, such as the number of signals exchanged by the two parties. We derive a bound on the secret key rate which is expressed as an optimization problem over Renyi entropies. Under the assumption of collective attacks by an eavesdropper, a computable estimate of our bound for the six-state protocol is provided. This bound leads to improved key rates in comparison to previous results.

  19. Reference-frame-independent quantum key distribution

    SciTech Connect (OSTI)

    Laing, Anthony; Rarity, John G.; O'Brien, Jeremy L. [Centre for Quantum Photonics, H. H. Wills Physics Laboratory and Department of Electrical and Electronic Engineering, University of Bristol, BS8 1UB (United Kingdom); Scarani, Valerio [Centre for Quantum Technologies and Department of Physics, National University of Singapore (Singapore)

    2010-07-15T23:59:59.000Z

    We describe a quantum key distribution protocol based on pairs of entangled qubits that generates a secure key between two partners in an environment of unknown and slowly varying reference frame. A direction of particle delivery is required, but the phases between the computational basis states need not be known or fixed. The protocol can simplify the operation of existing setups and has immediate applications to emerging scenarios such as earth-to-satellite links and the use of integrated photonic waveguides. We compute the asymptotic secret key rate for a two-qubit source, which coincides with the rate of the six-state protocol for white noise. We give the generalization of the protocol to higher-dimensional systems and detail a scheme for physical implementation in the three-dimensional qutrit case.

  20. On the Use of Integrated Daylighting and Energy Simulations to Drive the Design of a Large Net-Zero Energy Office Building: Preprint

    SciTech Connect (OSTI)

    Guglielmetti, R.; Pless, S.; Torcellini, P.

    2010-08-01T23:59:59.000Z

    This paper illustrates the challenges of integrating rigorous daylight and electric lighting simulation data with whole-building energy models, and defends the need for such integration to achieve aggressive energy savings. Through a case study example, we examine the ways daylighting -- and daylighting simulation -- drove the design of a large net-zero energy project. We give a detailed review of the daylighting and electric lighting design process for the National Renewable Energy Laboratory's Research Support Facility (RSF), a 220,000 ft2 net-zero energy project the author worked on as a daylighting consultant. A review of the issues involved in simulating and validating the daylighting performance of the RSF will be detailed, including daylighting simulation, electric lighting control response, and integration of Radiance simulation data into the building energy model. Daylighting was a key strategy in reaching the contractual energy use goals for the RSF project; the building's program, layout, orientation and interior/furniture design were all influenced by the daylighting design, and simulation was critical in ensuring these many design components worked together in an integrated fashion, and would perform as required to meet a very aggressive energy performance goal, as expressed in a target energy use intensity.