National Library of Energy BETA

Sample records for katie bolus support

  1. Katie Antypas

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Katie Antypas Katie Antypas setheight-Antypas.jpg Katie Antypas Scientific Computing and Data Services Department Head KAntypas@lbl.gov Phone: (510) 486-5575 Fax: (510) 486-4316 1 Cyclotron Road Mail Stop 943R0256 Berkeley, CA 94720 US Biographical Sketch As the department head of Scientific Computing and Data Services at the National Energy Research Scientific Computing (NERSC) Center, Katie has oversight of the Data Science Engagement, Data and Analytics Services, Storage Systems, and

  2. Katie Clarkin | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Katie Clarkin About Us Katie Clarkin - Special Assistant to the Deputy Secretary of Energy Katie Clarkin Katie Clarkin has served at the U.S. Department of Energy since August 2014, first as a Special Assistant in the Office of Scheduling Advance and shortly thereafter, as a Special Assistant and Scheduler. She is currently the Special Assistant to the Deputy Secretary of Energy. Katie attended Kent State University, where she graduated summa cum laude and Phi Beta Kappa with B.A. degrees in

  3. Katie Antypas Named New Head of NERSC Services Department

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Katie Antypas Named New Head of NERSC Services Department September 3, 2013 katie2 Katie Antypas Katie Antypas, who has led NERSC's User Services Group since October 2010, has been ...

  4. Katie Elyce Jones | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Katie Elyce Jones Katie Jones is a writer/editor in Argonne's Communications, Education and Public Affairs division. Contact her at (630) 252-5690 or media@anl.gov.

  5. Katie Elyce Jones | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Katie Elyce Jones About Us Katie Elyce Jones - Symmetry Magazine Katie Elyce Jones writes for Symmetry Magazine, an online magazine about particle physics. Symmetry is a joint publication by Fermilab and SLAC, two of the Department of Energy's 17 National Laboratories. Most Recent How Do You Keep a Particle Inside an Accelerator? February 2

  6. Women @ Energy: Katie Heroux | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Katie Heroux Women @ Energy: Katie Heroux September 22, 2015 - 1:53pm Addthis Katie J. Heroux is a Senior Scientist A at Savannah River National Lab (SRNL). She attended the University of New Hampshire for her bachelor of science degree and the University of California San Diego for her master's and Ph.D. Katie J. Heroux is a Senior Scientist A at Savannah River National Lab (SRNL). She attended the University of New Hampshire for her bachelor of science degree and the University of California

  7. Katie Antypas Named New Head of NERSC Services Department

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Katie Antypas Named New Head of NERSC Services Department Katie Antypas Named New Head of NERSC Services Department September 3, 2013 katie2 Katie Antypas Katie Antypas, who has led NERSC's User Services Group since October 2010, has been named as the new Services Department Head, effective September 23. Antypas succeeds Francesca Verdier, who will serve as Allocations Manager until her planned retirement in June 2014. Antypas is also the project lead for the NERSC-8 system procurement, a

  8. Katy, Texas: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    is a stub. You can help OpenEI by expanding it. Katy is a city in Fort Bend County and Harris County and Waller County, Texas. It falls under Texas's 14th congressional district...

  9. Katie Wong | Center for Bio-Inspired Solar Fuel Production

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Katie Wong Graduate student Subtask 4 project: "Carotene-Phthalocyanine Dyads as a Design Model for Artificial Photosynthesis

  10. Katie Carrado Gregar | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Katie Carrado Gregar Associate Director, CNM User Programs & Operations Ph. D., Chemistry, University of Connecticut Responsible for the development of strategic alliances and collaborative partnerships with academia, industry, and the user community at large, as well as directing the activities of the operations groups including information solutions & technology assurance, building facilities, and environment, safety & health (ESH) 20 years of experience in Argonne's Chemistry

  11. QER - Comment of Katy Eiseman 1 | Department of Energy

    Energy Savers [EERE]

    Katy Eiseman 1 QER - Comment of Katy Eiseman 1 From: Katy Eiseman Sent: Sunday, April 20, 2014 11:09 AM To: QERcomments Cc: Kulik, Stephen - Rep. (HOU); Benjamin.Downing@masenate.gov; env.internet@state.ma.us; stephanie.cooper@state.ma.us; david.cash@state.ma.us; rick.sullivan@state.ma.us; ann.berwick@state.ma.us; goffice@state.ma.us Subject: Quadrennial Energy Review - New England Infrastructure Constraints Attachments: Infrastructure Constraints in New England FINAL.pdf To members of the QER

  12. QER- Comment of Katy Eiseman 2

    Broader source: Energy.gov [DOE]

    Dear Commissioner Cash, Thank you for responding. By the way, congratulations on your new position at DEP. I am an Amherst High School graduate, and it's always nice to see western Mass. representation in Boston. I will make sure that the progressives I am in touch with across the state understand where you stand on the natural gas question. I am sorry if I misrepresented your point of view. Sincerely, Katy Eiseman On Mon, Apr 21, 2014 at 8:52 AM, Cash, David (DEP) wrote: Dear Katy, Thank you for your engagement in this issue – so crucial right now in terms of protecting our environment for the future and growing our economy. I would like to take this opportunity to correct what appears to be a misunderstanding in your email below about what I presented. I DO believe that through the committed work of the legislature, Governor Patrick and the Secretary of Energy and Environment, Rick Sullivan, we have charted a course that will achieve the 80% reduction of GHGs below 1990 levels by 2050 required by our Global Warming Solutions Act. Our transition to a more energy efficient economy and our unleashing of renewable energy has been a transformative game-changer and the envy of other states and even countries. However, during my presentation, I never said nor implied that we do not still need new fossil fuel infrastructure in the near term in order to balance the expected influx of intermittent wind and solar, keep energy prices reasonable, and maintain grid reliability. In fact, I made clear that near term investments in new infrastructure will better enable the more rapid and sustainable transition to renewable and energy efficiency that is required to address climate change and continue to grow clean energy jobs and protect ratepayers. Thanks. Sincerely, David =========================== David W. Cash, Ph.D. Commissioner Department of Environmental Protection Commonwealth of Massachusetts One Winter Street Boston, MA 02108 Phone: (617) 292-5856 email: david.cash@state.ma.us MassDEP on Twitter: https://twitter.com/massdep MassDEP on the Web: http://mass.gov/dep MassDEP's e-Newsletter and/or Regulations updates: http://mass.gov/dep/signup From: Katy Eiseman Sent: Sunday, April 20, 2014 11:09 AM To: QERcomments@hq.doe.gov Cc: Kulik, Stephen - Rep. (HOU); benjamin.downing@masenate.gov; internet, env (ENV); Cooper, Stephanie (ENV); Cash, David (DEP); Sullivan, Rick (EEA); Berwick, Ann (DPU); goffice@state.ma.us Subject: Quadrennial Energy Review - New England Infrastructure Constraints To members of the QER Task Force: Thank you for taking time to address energy concerns for our region. Here is my brief comment: We do not need more fossil fuel infrastructure. Natural gas has served its purpose as a bridge fuel here, and new gas infrastructure now will act as a raised drawbridge, holding back investments in renewables. Subsidies that would be going to the natural gas industry via the proposed tariff on our electric bills (http://www.nescoe.com/uploads/ISO_assistance_Trans___Gas_1_21_14_final.pdf) should be directed to sustainable, renewable sources and to the development of electrical storage capacity for those sources. Our new DEP Commissioner, David Cash, has put together a very compelling presentation on New England's ability to power itself solely with renewable sources. Please see http://netransition.org/net-zero-new-england/ It is unfortunate that we are learning about this important meeting during the holiest week of the year for many Americans. Most who care about this issue will not have time to comment thoughtfully. I trust that there will be ample opportunity for the public and our elected and appointed representatives to weigh these matters very carefully, as they impact the viability of life on this planet. Thank you, Katy Eiseman

  13. Katie Roberts, from grad student to employee | Y-12 National Security

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Complex Katie Roberts, from grad ... Katie Roberts, from grad student to employee Posted: July 2, 2014 - 1:36pm Print version Katie Roberts transitioned smoothly from the MBA Career Advantage Program to Y-12 employee. The MBA Career Advantage Program, sponsored by Y-12 and the University of Tennessee, has brought a number of students to the site. It's a way for Y-12 to develop and maintain positive relationships with educational institutions and to encourage students, who will be tomorrow's

  14. Yun (Helen) He, Alice Koniges, Richard Gerber, Katie Antypas!

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Alice Koniges, Richard Gerber, Katie Antypas! ! OpenMPCon, Sept 28-30, 2015 Using OpenMP at NERSC Outline * NERSC a nd o ur n ew s ystem - Why M PI + O penMP i s p referred * OpenMP u sage a t N ERSC * What d o w e t ell u sers a bout O penMP s caling - Process a nd t hread a ffinity - Scaling : ps - Tools f or O penMP * Case s tudies o f u sing a nd t uning M PI/OpenMP performance --- 2 --- NERSC and our new system --- 3 --- What is NERSC/LBNL * NaAonal E nergy R esearch S cienAfic C ompuAng

  15. From: Katie McKay To: Congestion Study Comments Subject: Opposition...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    I urge you to consider these reasons and please do not establish any National Interest Energy Transmission Corridors. Thank you, Katie McKay 10369 NE 336th St Cameron, MO 64429

  16. Shuaiqi Tang, Jonathan Edwards-Opperman, Katie Verlinden, Nils Küchler

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Can we see precipita-on proper-es moving through the mel-ng layer? Shuaiqi Tang, Jonathan Edwards-Opperman, Katie Verlinden, Nils Küchler Advisors: Matt Kumjian, Herman Russchenberg 2015 ARM Summer Workshop: Precipitation Properties Motivation * How does melting layer relate to precipitation properties above and below the melting layer? * Does the melting layer homogenize particles? * Can any signals be tracked through the melting layer? * Can we diagnose precipitation processes through melting

  17. Katie Antypas! NERSC Deputy for Data Science The Convergence

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... SLURM to better support data intensive science * NERSC made the switch from the TorqueMoab scheduler to SLURM on both Edison and Cori * Open source, NERSC can contribute to ...

  18. Franklin XT4 to Hopper XE6 Katie Antypas and Helen He NERSC User Services Group

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Transitioning Users from Franklin XT4 to Hopper XE6 Katie Antypas and Helen He NERSC User Services Group May 23-26, CUG 2011 2 Outline * Introduction * Hopper Early User Program * Effectively Using 24 Cores Per Node * I/O Performance * Bugs Found and Fixed * Error Messages * User Feedback * Ongoing Issues * Summary 3 Franklin and Hopper Franklin: Cray XT4 * 9,532 nodes, 38,128 cores * ~32 TFlop/s sustained * 356 TFlop/s peak Hopper: * Phase 1: Cray XT5, 668 nodes, 5,344 cores * Phase 2: Cray

  19. Katie Antypas

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Computational Fluid Dynamics 2005: Theory and Applications, edited by A. Deane, G. Brenner, A. Ecer, D. R. Emerson, j. McDonough, J. Periaux, N. Satofuka, D. Tromeur-Dervout.,...

  20. On bolus for megavoltage photon and electron radiation therapy

    SciTech Connect (OSTI)

    Vyas, Vedang; Palmer, Lisa; Mudge, Ray; Jiang, Runqing; Fleck, Andre; Schaly, Bryan; Osei, Ernest; Charland, Paule

    2013-10-01

    Frequently, in radiation therapy one must treat superficial lesions on cancer patients; these are at or adjacent to the skin. Megavoltage photon radiotherapy penetrates through the skin to irradiate deep-seated tumors, with skin-sparing property. Hence, to treat superficial lesions, one must use a layer of scattering material to feign as the skin surface. Although megavoltage electron beams are used for superficial treatments, one occasionally needs to enhance the dose near the surface. Such is the function of a bolus, a natural or synthetically developed material that acts as a layer of tissue to provide a more effective treatment to the superficial lesions. Other uses of boluses are to correct for varying surface contours and to add scattering material around the patient's surface. Materials used as bolus vary from simple water to metal and include various mixtures and compounds. Even with the modernization of the technology for external-beam therapy and the emergence of various commercial boluses, the preparation and utilization of a bolus in clinical radiotherapy remains an art. Considering the varying experiences and practices, this paper briefly summarizes available boluses that have been proposed and are employed in clinical radiotherapy. Although this review is not exhaustive, it provides some initial guidance and answers questions that may arise in clinical practice.

  1. Support

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    WIPP Support Double Beta Decay Dark Matter Biology Repository Science Renewable Energy Community, State and Congressional Support for WIPP as a host for Underground Experiments...

  2. SciThur AM: YIS - 07: Design and production of 3D printed bolus for electron radiation therapy

    SciTech Connect (OSTI)

    Su, Shiqin; Moran, Kathryn; Robar, James L.

    2014-08-15

    This is a proof-of-concept study demonstrating the capacity for modulated electron radiation therapy (MERT) using 3D printed bolus. Previous reports have involved bolus design using an electron pencil beam model and fabrication using a milling machine. In this study, an in-house algorithm is presented that optimizes the dose distribution with regard to dose coverage, conformity and homogeneity within planning target volume (PTV). The algorithm uses calculated result of a commercial electron Monte Carlo dose calculation as input. Distances along ray lines from distal side of 90% isodose to distal surface of PTV are used to estimate the bolus thickness. Inhomogeneities within the calculation volume are accounted for using coefficient of equivalent thickness method. Several regional modulation operators are applied to improve dose coverage and uniformity. The process is iterated (usually twice) until an acceptable MERT plan is realized, and the final bolus is printed using solid polylactic acid. The method is evaluated with regular geometric phantoms, anthropomorphic phantoms and a clinical rhabdomyosarcoma pediatric case. In all cases the dose conformity is improved compared to that with uniform bolus. The printed boluses conform well to the surface of complex anthropomorphic phantoms. For the rhabdomyosarcoma patient, the MERT plan yields a reduction of mean dose by 38.2% in left kidney relative to uniform bolus. MERT using 3D printed bolus appears to be a practical, low cost approach to generating optimized bolus for electron therapy. The method is effective in improving conformity of prescription isodose surface and in sparing immediately adjacent normal tissues.

  3. Bolus electron conformal therapy for the treatment of recurrent inflammatory breast cancer: a case report

    SciTech Connect (OSTI)

    Kim, Michelle M.; Kudchadker, Rajat J.; Kanke, James E.; Zhang, Sean; Perkins, George H.

    2012-07-01

    The treatment of locoregionally recurrent breast cancer in patients who have previously undergone radiation therapy is challenging. Special techniques are often required that both eradicate the disease and minimize the risks of retreatment. We report the case of a patient with an early-stage left breast cancer who developed inflammatory-type recurrence requiring re-irradiation of the chest wall using bolus electron conformal therapy with image-guided treatment delivery. The patient was a 51-year-old woman who had undergone lumpectomy, axillary lymph node dissection, and adjuvant whole-breast radiation therapy for a stage I left breast cancer in June 1998. In March 2009, she presented at our institution with biopsy-proven recurrent inflammatory carcinoma and was aggressively treated with multi-agent chemotherapy followed by mastectomy that left a positive surgical margin. Given the patient's prior irradiation and irregular chest wall anatomy, bolus electron conformal therapy was used to treat her chest wall and draining lymphatics while sparing the underlying soft tissue. The patient still had no evidence of disease 21 months after treatment. Our results indicate that bolus electron conformal therapy is an accessible, effective radiation treatment approach for recurrent breast cancer in patients with irregular chest wall anatomy as a result of surgery. This approach may complement standard techniques used to reduce locoregional recurrence in the postmastectomy setting.

  4. Katie Antypas The Cori System

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Antypas The Cori System --- 1 --- NUG 2015 February 2 4, 2 014 The Cori System * Cori w ill s upport t he b road Office o f S cience r esearch community a nd b egin t o transiDon t he w orkload t o more e nergy e fficient architectures --- 2 --- System n amed a .er Gerty C ori, Biochemist a nd fi rst A merican woman t o r eceive t he N obel prize i n s cience. Image s ource: W ikipedia Cori Configuration - 64 cabinets of Cray XC system * Over 9 ,300 ' Knights L anding' c ompute n odes -

  5. Katy Christiansen | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Favorite Thing About Living and Working in Washington, D.C.: "It is such a big and diverse city. There's so much history, art, and culture to explore that I feel like I can always ...

  6. Katie Antypas! NERSC Deputy for Data Science

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Cori Phase 2 update - 1 - Cori: A pre-exascale supercomputer for the Office of Science workload * System will begin to transi1on the workload to more energy efficient architectures * Will showcase technologies expected in exascale systems - Processors with many 'slow' cores and longer vector units - Deepening memory and storage hierarchies System named a<er Gerty Cori, Biochemist and first American woman to receive the Nobel prize in science. Image source: Wikipedia - 2 - Cori Configuration -

  7. Sustainability Support

    Broader source: Energy.gov [DOE]

    Sustainability Support serves as a corporate technical assistance, coordination, and integration resource to support line organizations in the resolution of sustainability issues and management concerns.

  8. Support Nodes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Support Nodes Support Nodes xe6blade.png Hopper has nodes connected to the internal Gemini network that provide functions that support the compute nodes. These include job launch nodes (MOM nodes), Lustre router nodes, DVS nodes, networking nodes and nodes that support shared and dynamic libraries. MOM Nodes (On Compute Blades) manage and launch parallel applications execute job scripts 24 nodes 32 GB of memory per node Lustre Router Nodes (Service Nodes) route IO data to the /scratch file

  9. Consortium Support (Fixed Support) | Department of Energy

    Energy Savers [EERE]

    Support (Fixed Support) Consortium Support (Fixed Support) Microsoft Office document icon Consortium Fixed Support.doc More Documents & Publications Consortium Template (Expenditure-Based

  10. Web Support

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Web Support We want to be able to respond promptly to your queries. To expedite our response, please check the specific website or page in question for the name of the appropriate person to contact. Contact our Public Affairs Department for comments about content here. Other comments about the main Lab website, www.lbl.gov, can be directed to webs...@lbl.gov. Also see privacy, security, copyright, and disclaimer information.

  11. Katie Antypas, Richard Gerber, Jack Deslippe NUG Monthly Meeting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Richard Gerber, Jack Deslippe NUG Monthly Meeting --- 1 --- NUG M onthly M ee-ng June 5 , 2 014 NERSC is moving to our new building in 2015!! * Four s tory, 1 40,000 G SF - 300 o ffices o n t wo fl oors - 20K --- > 2 9Ksf H PC fl oor - 12.5MW --- > 4 2 M W t o b uilding * Located for collabora-on - CRD a nd E Snet - UC B erkeley * Excep-onal energy efficiency - Natural a ir a nd w ater c ooling - Heat r ecovery - PUE < 1 .1 - LEED g old d esign 2 ComputaRonal R esearch a nd T heory B

  12. Letter: Katy Trail Radiological Survey at Southeast Drainage.

    Office of Legacy Management (LM)

  13. Mission Support - Hanford Site

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Mission Support Richland Operations Office Richland Operations Office River Corridor Central Plateau Groundwater Mission Support Long-Term Stewardship HAMMER Newsroom Mission Support Email Email Page | Print Print Page |Text Increase Font Size Decrease Font Size MissionSupportCollage The Richland Operations Office's Mission Support organization provides both DOE offices and the entire Hanford Site with quality, cost-effective infrastructure and support services to enable the cleanup mission to

  14. Emergency Support Function #12; Energy Annex - Support Agencies...

    Energy Savers [EERE]

    Annex - Support Agencies Emergency Support Function 12; Energy Annex - Support Agencies Emergency Support Function 12 - Energy Annex - Support Agencies and their related...

  15. Mine roof support system

    SciTech Connect (OSTI)

    Culley, D.H.

    1982-01-26

    A mine roof support system is disclosed having sets of laterally spaced pairs of elongated support members adapted to be moved into and out of abutting relation with a mine roof. Wheel supported frames extend between and connect adjacent end portions of each pair of support members with adjacent wheel supported frames at the ends of the support members being in spaced tandem relation and connected to each other by connector members. Extensible prop members are connected to and move the wheel supported frames and the elongated support members connected thereto selectively toward and away from the mine roof.

  16. Reactor vessel support system

    DOE Patents [OSTI]

    Golden, Martin P.; Holley, John C.

    1982-01-01

    A reactor vessel support system includes a support ring at the reactor top supported through a box ring on a ledge of the reactor containment. The box ring includes an annular space in the center of its cross-section to reduce heat flow and is keyed to the support ledge to transmit seismic forces from the reactor vessel to the containment structure. A coolant channel is provided at the outside circumference of the support ring to supply coolant gas through the keyways to channels between the reactor vessel and support ledge into the containment space.

  17. Fall 2007 American Geophysical Union Meeting Student Travel Support for Environmental Nanomaterials Session (#B35) (December 10-14, 2007)

    SciTech Connect (OSTI)

    Michael F. Hochella, Jr.

    2007-10-01

    The purpose of award no. DE-FG02-08ER15925 was to fund travel for students to present at the Fall 2007 American Geophysical Meeting. This was done successfully, and five students (Bin Xie, Qiaona Hu, Katie Schreiner, Daria Kibanova, and Frank-Andreas Weber) gave excellent oral and poster presentations at the meeting. Provided are the conference abstracts for their presentations.

  18. Supported PV module assembly

    DOE Patents [OSTI]

    Mascolo, Gianluigi; Taggart, David F.; Botkin, Jonathan D.; Edgett, Christopher S.

    2013-10-15

    A supported PV assembly may include a PV module comprising a PV panel and PV module supports including module supports having a support surface supporting the module, a module registration member engaging the PV module to properly position the PV module on the module support, and a mounting element. In some embodiments the PV module registration members engage only the external surfaces of the PV modules at the corners. In some embodiments the assembly includes a wind deflector with ballast secured to a least one of the PV module supports and the wind deflector. An array of the assemblies can be secured to one another at their corners to prevent horizontal separation of the adjacent corners while permitting the PV modules to flex relative to one another so to permit the array of PV modules to follow a contour of the support surface.

  19. Emergency Medical Support

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1997-08-21

    This volume defines coordination between emergency planners and emergency medical support. Canceled by DOE G 151.1-4.

  20. Office of Sustainability Support

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Office of Sustainability Support serves as AUs organizational lead in partnering with the Departments Sustainability Performance Office to support the understanding and implementation of sustainability programs and requirements within the Department, including through supporting development and implementation of DOEs annual Strategic Sustainability Program Plan.

  1. Supported microporous ceramic membranes

    DOE Patents [OSTI]

    Webster, E.; Anderson, M.

    1993-12-14

    A method for the formation of microporous ceramic membranes onto a porous support includes placing a colloidal suspension of metal or metal oxide particles on one side of the porous support and exposing the other side of the porous support to a drying stream of gas or a reactive gas stream so that the particles are deposited on the drying side of the support as a gel. The gel so deposited can be sintered to form a supported ceramic membrane useful for ultrafiltration, reverse osmosis, or molecular sieving having mean pore sizes less than 100 Angstroms. 4 figures.

  2. Supported microporous ceramic membranes

    DOE Patents [OSTI]

    Webster, Elizabeth; Anderson, Marc

    1993-01-01

    A method for permformation of microporous ceramic membranes onto a porous support includes placing a colloidal suspension of metal or metal oxide particles on one side of the porous support and exposing the other side of the porous support to a drying stream of gas or a reactive gas stream so that the particles are deposited on the drying side of the support as a gel. The gel so deposited can be sintered to form a supported ceramic membrane useful for ultrafiltration, reverse osmosis, or molecular sieving having mean pore sizes less than 100 Angstroms.

  3. Mine roof support

    SciTech Connect (OSTI)

    Bollmann, A.

    1982-01-05

    A mine roof support has a base, a supporting prop extending upwardly from the base, an elongated roof-supporting element having one portion supported by the supporting prop and another portion telescopable relative to the one portion toward a mine face and having a free end formed as a housing with a width corresponding to the width of the one portion, and a thrust prop arranged to support the free end section of the telescopable portion of the roof-supporting element and having a roof-side end section which is forcedly displaceable in the housing in direction of elongation of a mine and pivotable in a substantially vertical plane about an axle arranged in the housing.

  4. Cryogenic support system

    DOE Patents [OSTI]

    Nicol, Thomas H.; Niemann, Ralph C.; Gonczy, John D.

    1988-01-01

    A support system is disclosed for restraining large masses at very low or cryogenic temperatures. The support system employs a tie bar that is pivotally connected at opposite ends to an anchoring support member and a sliding support member. The tie bar extends substantially parallel to the longitudinal axis of the cold mass assembly, and comprises a rod that lengthens when cooled and a pair of end attachments that contract when cooled. The rod and end attachments are sized so that when the tie bar is cooled to cryogenic temperature, the net change in tie bar length is approximately zero. Longitudinal force directed against the cold mass assembly is distributed by the tie bar between the anchoring support member and the sliding support member.

  5. Cryogenic support system

    DOE Patents [OSTI]

    Nicol, T.H.; Niemann, R.C.; Gonczy, J.D.

    1988-11-01

    A support system is disclosed for restraining large masses at very low or cryogenic temperatures. The support system employs a tie bar that is pivotally connected at opposite ends to an anchoring support member and a sliding support member. The tie bar extends substantially parallel to the longitudinal axis of the cold mass assembly, and comprises a rod that lengthens when cooled and a pair of end attachments that contract when cooled. The rod and end attachments are sized so that when the tie bar is cooled to cryogenic temperature, the net change in tie bar length is approximately zero. Longitudinal force directed against the cold mass assembly is distributed by the tie bar between the anchoring support member and the sliding support member. 7 figs.

  6. Crystalline titanate catalyst supports

    DOE Patents [OSTI]

    Anthony, Rayford G. (Bryan, TX); Dosch, Robert G. (Albuquerque, NM)

    1993-01-01

    A series of new crystalline titanates (CT) are shown to have considerable potential as catalyst supports. For Pd supported catalyst, the catalytic activity for pyrene hydrogenation was substantially different depending on the type of CT, and one was substantially more active than Pd on hydrous titanium oxide (HTO). For 1-hexene hydrogenation the activities of the new CTs were approximately the same as for the hydrous metal oxide supports.

  7. Conduction cooled tube supports

    DOE Patents [OSTI]

    Worley, Arthur C.; Becht, IV, Charles

    1984-01-01

    In boilers, process tubes are suspended by means of support studs that are in thermal contact with and attached to the metal roof casing of the boiler and the upper bend portions of the process tubes. The support studs are sufficiently short that when the boiler is in use, the support studs are cooled by conduction of heat to the process tubes and the roof casing thereby maintaining the temperature of the stud so that it does not exceed 1400.degree. F.

  8. Crystalline titanate catalyst supports

    DOE Patents [OSTI]

    Anthony, R.G.; Dosch, R.G.

    1993-01-05

    A series of new crystalline titanates (CT) are shown to have considerable potential as catalyst supports. For Pd supported catalyst, the catalytic activity for pyrene hydrogenation was substantially different depending on the type of CT, and one was substantially more active than Pd on hydrous titanium oxide (HTO). For 1-hexene hydrogenation the activities of the new CTs were approximately the same as for the hydrous metal oxide supports.

  9. Mine roof supporting system

    SciTech Connect (OSTI)

    Curry, P.F.

    1981-06-23

    A stabilizing arrangement for mine roof support systems of the type in which a series of support units, each including a transverse beam supported at opposite ends by extensible props, are interconnected by extensible struts in a manner to be selfadvancing by alternate retraction of support units from a roof supporting condition and extension of the struts to advance such retracted units relative to others of such units which are in an extended roof engaging condition. The connection of each prop to the beam in a given unit is pivotal to allow deflection of the beam and props of a supporting unit from a normal perpendicular relationship under load. The stabilizing means restores the props and beam to a normal perpendicular relationship for advancing movement of each support unit. The supporting units are further stabilized relative to the struts by prop supporting brackets permitting canting movement of the props from a perpendicular relationship with respect to the struts but maintaining the props in a generally upright position for unit advance.

  10. Detector Support Group

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    browser. Concerns? Hall B Navigation DSG Home Staff Presentations Notes print version Detector Support Group Spotlight Archive Index Rotation test for the SVT detector EPICS...

  11. Vessel structural support system

    DOE Patents [OSTI]

    Jenko, James X. (N. Versailles, PA); Ott, Howard L. (Kiski Twp., Allegheny County, PA); Wilson, Robert M. (Plum Boro, PA); Wepfer, Robert M. (Murrysville, PA)

    1992-01-01

    Vessel structural support system for laterally and vertically supporting a vessel, such as a nuclear steam generator having an exterior bottom surface and a side surface thereon. The system includes a bracket connected to the bottom surface. A support column is pivotally connected to the bracket for vertically supporting the steam generator. The system also includes a base pad assembly connected pivotally to the support column for supporting the support column and the steam generator. The base pad assembly, which is capable of being brought to a level position by turning leveling nuts, is anchored to a floor. The system further includes a male key member attached to the side surface of the steam generator and a female stop member attached to an adjacent wall. The male key member and the female stop member coact to laterally support the steam generator. Moreover, the system includes a snubber assembly connected to the side surface of the steam generator and also attached to the adjacent wall for dampening lateral movement of the steam generator. In addition, the system includes a restraining member of "flat" attached to the side surface of the steam generator and a bumper attached to the adjacent wall. The flat and the bumper coact to further laterally support the steam generator.

  12. Nanostructured catalyst supports

    DOE Patents [OSTI]

    Zhu, Yimin; Goldman, Jay L.; Qian, Baixin; Stefan, Ionel C.

    2015-09-29

    The present invention relates to SiC nanostructures, including SiC nanopowder, SiC nanowires, and composites of SiC nanopowder and nanowires, which can be used as catalyst supports in membrane electrode assemblies and in fuel cells. The present invention also relates to composite catalyst supports comprising nanopowder and one or more inorganic nanowires for a membrane electrode assembly.

  13. Nanostructured catalyst supports

    DOE Patents [OSTI]

    Zhu, Yimin; Goldman, Jay L.; Qian, Baixin; Stefan, Ionel C.

    2012-10-02

    The present invention relates to SiC nanostructures, including SiC nanopowder, SiC nanowires, and composites of SiC nanopowder and nanowires, which can be used as catalyst supports in membrane electrode assemblies and in fuel cells. The present invention also relates to composite catalyst supports comprising nanopowder and one or more inorganic nanowires for a membrane electrode assembly.

  14. Steam generator support system

    DOE Patents [OSTI]

    Moldenhauer, J.E.

    1987-08-25

    A support system for connection to an outer surface of a J-shaped steam generator for use with a nuclear reactor or other liquid metal cooled power source is disclosed. The J-shaped steam generator is mounted with the bent portion at the bottom. An arrangement of elongated rod members provides both horizontal and vertical support for the steam generator. The rod members are interconnected to the steam generator assembly and a support structure in a manner which provides for thermal distortion of the steam generator without the transfer of bending moments to the support structure and in a like manner substantially minimizes forces being transferred between the support structure and the steam generator as a result of seismic disturbances. 4 figs.

  15. Steam generator support system

    DOE Patents [OSTI]

    Moldenhauer, James E.

    1987-01-01

    A support system for connection to an outer surface of a J-shaped steam generator for use with a nuclear reactor or other liquid metal cooled power source. The J-shaped steam generator is mounted with the bent portion at the bottom. An arrangement of elongated rod members provides both horizontal and vertical support for the steam generator. The rod members are interconnected to the steam generator assembly and a support structure in a manner which provides for thermal distortion of the steam generator without the transfer of bending moments to the support structure and in a like manner substantially minimizes forces being transferred between the support structure and the steam generator as a result of seismic disturbances.

  16. Chromatography resin support

    DOE Patents [OSTI]

    Dobos, James G.

    2002-01-01

    An apparatus and method of using an improved chromatography resin support is disclosed. The chromatography support platform is provided by a stainless steel hollow cylinder adapted for being inserted into a chromatography column. An exterior wall of the stainless steel cylinder defines a groove for carrying therein an "O"-ring. The upper surface of the stainless steel column is covered by a fine stainless steel mesh welded to the edges of the stainless steel cylinder. When placed upon a receiving ledge defined within a chromatography column, the "O"-ring provides a fluid tight seal with the inner edge wall of the chromatography cylinder. The stainless steel mesh supports the chromatography matrix and provides a back flushable support which is economical and simple to construct.

  17. Sophia Support Version 12

    Energy Science and Technology Software Center (OSTI)

    2012-08-09

    Sophia Support Version 12 is the assemblage of scripts and files that turn the Sophia tool suite source code into the Sophia Debian installation package that is used by Ubuntu 10.04 LTS.

  18. Fuel rod support grid

    DOE Patents [OSTI]

    Downs, Robert E.; Schwallie, Ambrose L.

    1985-01-01

    A grid for the support of nuclear fuel rods arranged in a triangular array. The grid is formed by concentric rings of strap joined by radially arranged web sections.

  19. Mantis BT Cluster Support

    Energy Science and Technology Software Center (OSTI)

    2009-06-05

    The software is a modidication to the Mantis BT V1.5 open source application provided by the mantis BT group to support cluster web servers. It also provides various cosmetic modifications used a LLNL.

  20. Supported inorganic membranes

    DOE Patents [OSTI]

    Sehgal, Rakesh; Brinker, Charles Jeffrey

    1998-01-01

    Supported inorganic membranes capable of molecular sieving, and methods for their production, are provided. The subject membranes exhibit high flux and high selectivity. The subject membranes are substantially defect free and less than about 100 nm thick. The pores of the subject membranes have an average critical pore radius of less than about 5 .ANG., and have a narrow pore size distribution. The subject membranes are prepared by coating a porous substrate with a polymeric sol, preferably under conditions of low relative pressure of the liquid constituents of the sol. The coated substrate is dried and calcined to produce the subject supported membrane. Also provided are methods of derivatizing the surface of supported inorganic membranes with metal alkoxides. The subject membranes find use in a variety of applications, such as the separation of constituents of gaseous streams, as catalysts and catalyst supports, and the like.

  1. Appendix G Supporting Documentation

    Office of Legacy Management (LM)

    Supporting Documentation for Focused Feasibility Study This page intentionally left blank Contents Section Ground Water Models for Alternatives 3 and 4 ........................................................................ G .O Human Health Risk Assessment Calculations ........................................................................... G2.0 Cost Analysis ........................................................................................................................... G3.0 This

  2. SAE Standards Support

    SciTech Connect (OSTI)

    Gowri, Krishnan

    2012-11-01

    This report summarizes PNNL activities in FY 2012 in support of the following two vehicle communication standards activities: Technical support to SAE, ANSI and NIST technical working groups. PNNL actively contributed to the use case development, harmonization, and evaluation of the SAE standards activities for vehicle to grid communication Tested and validated a set of potential technologies for meeting SAE communication requirements and provided recommendations for technology choices.

  3. Concentric tube support assembly

    DOE Patents [OSTI]

    Rubio, Mark F.; Glessner, John C.

    2012-09-04

    An assembly (45) includes a plurality of separate pie-shaped segments (72) forming a disk (70) around a central region (48) for retaining a plurality of tubes (46) in a concentrically spaced apart configuration. Each segment includes a support member (94) radially extending along an upstream face (96) of the segment and a plurality of annularly curved support arms (98) transversely attached to the support member and radially spaced apart from one another away from the central region for receiving respective upstream end portions of the tubes in arc-shaped spaces (100) between the arms. Each segment also includes a radial passageway (102) formed in the support member for receiving a fluid segment portion (106) and a plurality of annular passageways (104) formed in the support arms for receiving respective arm portions (108) of the fluid segment portion from the radial passageway and for conducting the respective arm portions into corresponding annular spaces (47) formed between the tubes retained by the disk.

  4. Crank shaft support assembly

    DOE Patents [OSTI]

    Natkin, Robert J.; Oltmans, Bret; Allison, John E.; Heater, Thomas J.; Hines, Joy Adair; Tappen, Grant K.; Peiskammer, Dietmar

    2007-10-23

    A crank shaft support assembly for increasing stiffness and reducing thermal mismatch distortion in a crank shaft bore of an engine comprising different materials. A cylinder block comprises a first material and at least two crank journal inserts are insert-molded into respective crank journal regions of the cylinder block and comprise a second material having greater stiffness and a lower thermal coefficient of expansion that the first material. At least two bearing caps are bolted to the respective crank journal inserts and define, along with the crank journal inserts, at least two crank shaft support rings defining a crank shaft bore coaxially aligned with a crank shaft axis. The bearing caps comprise a material having higher stiffness and a lower thermal coefficient of expansion than the first material and are supported on the respective crank journal inserts independently of any direct connection to the cylinder block.

  5. Aerogel-supported filament

    DOE Patents [OSTI]

    Wuest, Craig R.; Tillotson, Thomas M.; Johnson, III, Coleman V.

    1995-01-01

    The present invention is a thin filament embedded in a low density aerogel for use in radiation detection instruments and incandescent lamps. The aerogel provides a supportive matrix that is thermally and electrically nonconductive, mechanically strong, highly porous, gas-permeable, and transparent to ionizing radiation over short distances. A low density, open-cell aerogel is cast around a fine filament or wire, which allows the wire to be positioned with little or no tension and keeps the wire in place in the event of breakage. The aerogel support reduces the stresses on the wire caused by vibrational, gravitational, electrical, and mechanical forces.

  6. Aerogel-supported filament

    DOE Patents [OSTI]

    Wuest, C.R.; Tillotson, T.M.; Johnson, C.V. III

    1995-05-16

    The present invention is a thin filament embedded in a low density aerogel for use in radiation detection instruments and incandescent lamps. The aerogel provides a supportive matrix that is thermally and electrically nonconductive, mechanically strong, highly porous, gas-permeable, and transparent to ionizing radiation over short distances. A low density, open-cell aerogel is cast around a fine filament or wire, which allows the wire to be positioned with little or no tension and keeps the wire in place in the event of breakage. The aerogel support reduces the stresses on the wire caused by vibrational, gravitational, electrical, and mechanical forces. 6 Figs.

  7. Cryogenic structural support

    DOE Patents [OSTI]

    Niemann, Ralph C. (Downers Grove, IL); Mataya, Karl F. (Lemont, IL); Gonczy, John D. (Oak Lawn, IL)

    1982-01-01

    A tensile support member is provided for use in a cryogenic environment. The member is in the form of a link formed of an epoxy glass laminate with at least one ply of the laminate having its fibers aligned circumferentially about the link.

  8. Motorized support jack

    DOE Patents [OSTI]

    Haney, Steven J. (Tracey, CA); Herron, Donald Joe (Manteca, CA)

    2001-01-01

    A compact, vacuum compatible motorized jack for supporting heavy loads and adjusting their positions is provided. The motorized jack includes: (a) a housing having a base; (b) a first roller device that provides a first slidable surface and that is secured to the base; (c) a second roller device that provides a second slidable surface and that has an upper surface; (d) a wedge that is slidably positioned between the first roller device and the second roller device so that the wedge is in contact with the first slidable surface and the second slidable surface; (e) a motor; and (d) a drive mechanism that connects the motor and the wedge to cause the motor to controllably move the wedge forwards or backwards. Individual motorized jacks can support and lift of an object at an angle. Two or more motorized jacks can provide tip, tilt and vertical position adjustment capabilities.

  9. Motorized support jack

    DOE Patents [OSTI]

    Haney, Steven J.; Herron, Donald Joe

    2003-05-13

    A compact, vacuum compatible motorized jack for supporting heavy loads and adjusting their positions is provided. The motorized jack includes: (a) a housing having a base; (b) a first roller device that provides a first slidable surface and that is secured to the base; (c) a second roller device that provides a second slidable surface and that has an upper surface; (d) a wedge that is slidably positioned between the first roller device and the second roller device so that the wedge is in contact with the first slidable surface and the second slidable surface; (e) a motor; and (d) a drive mechanism that connects the motor and the wedge to cause the motor to controllably move the wedge forwards or backwards. Individual motorized jacks can support and lift of an object at an angle. Two or more motorized jacks can provide tip, tilt and vertical position adjustment capabilities.

  10. Mission Support Alliance, LLC

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Alliance, LLC 2490 Garlick Boulevard Richland, WA 99354 Subcontracting Plan for Small Business Concerns Pursuant to FAR 19.7 FAR Clause 52.219-9 and Public Laws 95-907, 99-661, 106-50, and 100-108 Update: November 19, 2014 In accordance with Public Law (P.L.) 95-507, P.L. 99-661, Section 1207, P.L. 106-50, P.L. 100-180, Section 806 and FAR Clause 52-219-9 (Small Business Subcontracting Plan); Mission Support Alliance LLC is using the following subcontracting plan: Name of Contractor: Mission

  11. Mission Support Alliance, LLC

    Energy Savers [EERE]

    December 3, 2015 Mr. William Johnson President Mission Support Alliance, LLC 2490 Garlick Boulevard P.O. Box 650 Richland, Washington 99352 WEL-2015-07 Dear Mr. Johnson: The Office of Enterprise Assessments' Office of Enforcement has completed an evaluation of an incident involving a rigger injured during a crane re-spooling operation, as reported into the Department of Energy's (DOE) Occurrence Reporting and Processing System under EM-RL--MSC-FSS-2015-0002 on May 11, 2015. On May 1, 2015, a

  12. Cryogenic support member

    DOE Patents [OSTI]

    Niemann, Ralph C.; Gonczy, John D.; Nicol, Thomas H.

    1987-01-01

    A cryogenic support member is comprised of a non-metallic rod having a depression in at least one end and a metallic end connection assembled to the rod. The metallic end connection comprises a metallic plug which conforms to the shape and is disposed in the depression and a metallic sleeve is disposed over the rod and plug. The plug and the sleeve are shrink-fitted to the depression in the rod to form a connection good in compression, tension and bending.

  13. Heating element support clip

    DOE Patents [OSTI]

    Sawyer, William C.

    1995-01-01

    An apparatus for supporting a heating element in a channel formed in a heater base is disclosed. A preferred embodiment includes a substantially U-shaped tantalum member. The U-shape is characterized by two substantially parallel portions of tantalum that each have an end connected to opposite ends of a base portion of tantalum. The parallel portions are each substantially perpendicular to the base portion and spaced apart a distance not larger than a width of the channel and not smaller than a width of a graphite heating element. The parallel portions each have a hole therein, and the centers of the holes define an axis that is substantially parallel to the base portion. An aluminum oxide ceramic retaining pin extends through the holes in the parallel portions and into a hole in a wall of the channel to retain the U-shaped member in the channel and to support the graphite heating element. The graphite heating element is confined by the parallel portions of tantalum, the base portion of tantalum, and the retaining pin. A tantalum tube surrounds the retaining pin between the parallel portions of tantalum.

  14. Heating element support clip

    DOE Patents [OSTI]

    Sawyer, W.C.

    1995-08-15

    An apparatus for supporting a heating element in a channel formed in a heater base is disclosed. A preferred embodiment includes a substantially U-shaped tantalum member. The U-shape is characterized by two substantially parallel portions of tantalum that each have an end connected to opposite ends of a base portion of tantalum. The parallel portions are each substantially perpendicular to the base portion and spaced apart a distance not larger than a width of the channel and not smaller than a width of a graphite heating element. The parallel portions each have a hole therein, and the centers of the holes define an axis that is substantially parallel to the base portion. An aluminum oxide ceramic retaining pin extends through the holes in the parallel portions and into a hole in a wall of the channel to retain the U-shaped member in the channel and to support the graphite heating element. The graphite heating element is confined by the parallel portions of tantalum, the base portion of tantalum, and the retaining pin. A tantalum tube surrounds the retaining pin between the parallel portions of tantalum. 6 figs.

  15. Pressurizer tank upper support

    DOE Patents [OSTI]

    Baker, T.H.; Ott, H.L.

    1994-01-11

    A pressurizer tank in a pressurized water nuclear reactor is mounted between structural walls of the reactor on a substructure of the reactor, the tank extending upwardly from the substructure. For bearing lateral loads such as seismic shocks, a girder substantially encircles the pressurizer tank at a space above the substructure and is coupled to the structural walls via opposed sway struts. Each sway strut is attached at one end to the girder and at an opposite end to one of the structural walls, and the sway struts are oriented substantially horizontally in pairs aligned substantially along tangents to the wall of the circular tank. Preferably, eight sway struts attach to the girder at 90[degree] intervals. A compartment encloses the pressurizer tank and forms the structural wall. The sway struts attach to corners of the compartment for maximum stiffness and load bearing capacity. A valve support frame carrying the relief/discharge piping and valves of an automatic depressurization arrangement is fixed to the girder, whereby lateral loads on the relief/discharge piping are coupled directly to the compartment rather than through any portion of the pressurizer tank. Thermal insulation for the valve support frame prevents thermal loading of the piping and valves. The girder is shimmed to define a gap for reducing thermal transfer, and the girder is free to move vertically relative to the compartment walls, for accommodating dimensional variation of the pressurizer tank with changes in temperature and pressure. 10 figures.

  16. Pressurizer tank upper support

    DOE Patents [OSTI]

    Baker, Tod H. (O'Hara Township, Allegheny County, PA); Ott, Howard L. (Kiski Township, Armstrong County, PA)

    1994-01-01

    A pressurizer tank in a pressurized water nuclear reactor is mounted between structural walls of the reactor on a substructure of the reactor, the tank extending upwardly from the substructure. For bearing lateral loads such as seismic shocks, a girder substantially encircles the pressurizer tank at a space above the substructure and is coupled to the structural walls via opposed sway struts. Each sway strut is attached at one end to the girder and at an opposite end to one of the structural walls, and the sway struts are oriented substantially horizontally in pairs aligned substantially along tangents to the wall of the circular tank. Preferably, eight sway struts attach to the girder at 90.degree. intervals. A compartment encloses the pressurizer tank and forms the structural wall. The sway struts attach to corners of the compartment for maximum stiffness and load bearing capacity. A valve support frame carrying the relief/discharge piping and valves of an automatic depressurization arrangement is fixed to the girder, whereby lateral loads on the relief/discharge piping are coupled directly to the compartment rather than through any portion of the pressurizer tank. Thermal insulation for the valve support frame prevents thermal loading of the piping and valves. The girder is shimmed to define a gap for reducing thermal transfer, and the girder is free to move vertically relative to the compartment walls, for accommodating dimensional variation of the pressurizer tank with changes in temperature and pressure.

  17. Mission Support Alliance - Hanford Site

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Contracting Mission Support Alliance Contracting ORP Contracts and Procurements RL Contracts and Procurements CH2M HILL Plateau Remediation Company Mission Support Alliance Hanford Fire Department Washington Closure Hanford HPM Corporation (HPMC) Wastren Advantage, Inc. Bechtel National, Inc. Washington River Protection Solutions Mission Support Alliance Email Email Page | Print Print Page |Text Increase Font Size Decrease Font Size Mission Support Alliance (MSA) logo Mission Support Alliance

  18. Mine roof support

    SciTech Connect (OSTI)

    Bollmann, A.

    1981-02-24

    A mine roof support has a base and a roof shield pivoted to the base and carrying at its upper end a pivoted cap which is urged upwardly against the mine roof by a hydraulic pit prop reacting between the cap and the base. The lower end of the roof shield is connected to the base by two links each having a pivot cooperating with a pivot on the roof shield, and a pivot cooperating with a pivot on the base. In addition, the base and/or the lower end of the roof shield has an auxiliary for each link and each link has an auxiliary pivot which can be connected with one of the auxiliary pivots of the base or lower end.

  19. Support and maneuvering device

    DOE Patents [OSTI]

    Wood, R.L.

    1987-03-23

    A support and maneuvering device includes an elongated flexible inflatable enclosure having a fixed end and a movable end. The movable end is collapsible toward the fixed end to a contracted position when the enclosure is in a noninflated condition. Upon inflation, the movable end is movable away from the fixed end to an extended position. The movable end includes means for mounting an article such as a solar reflector thereon. The device also includes a plurality of position controlling means disposed about the movable end to effect adjusting movement of portions thereof by predetermined amounts and for controlling an angle at which the article disposed at the movable end is oriented. The plurality of position controlling means limits a suitable number degrees of freedom of the movable end for transmitting a steering motion thereto and for controlling the position thereof. 9 figs.

  20. Support and maneuvering device

    DOE Patents [OSTI]

    Wood, Richard L.

    1988-01-01

    A support and maneuvering device includes an elongated flexible inflatable enclosure having a fixed end and a movable end. The movable end is collapsible toward the fixed end to a contracted position when the enclosure is in a noninflated condition. Upon inflation, the movable end is movable away from the fixed end to an extended position. The movable end includes means for mounting an article such as a solar reflector thereon. The device also includes a plurality of position controlling means disposed about the movable end to effect adjusting movement of portions thereof by predetermined amounts and for controlling an angle at which the article disposed at the movable end is oriented. The plurality of position controlling means limits a suitable number degrees of freedom of the movable end for transmitting a steering motion thereto and for controlling the position thereof.

  1. ATS materials support

    SciTech Connect (OSTI)

    Karnitz, M.A.; Wright, I.G.; Ferber, M.K.; Holcomb, R.S.; Rawlins, M.H.

    1996-12-31

    The technology based portion of the Advanced Turbine System Program (ATS) contains several subelements which address generic technology issues for land-base gas turbine systems. One subelement is the Materials/Manufacturing Technology Program which is coordinated by DOE-Oak Ridge Operations and Oak Ridge National laboratory (ORNL) for the Department of Energy. The work in this subelement is being performed predominantly by industry with assistance from national laboratories and universities. Projects in this subelement are aimed toward hastening the incorporation of new materials and components in gas turbines. The materials manufacturing subelement was developed with input from gas turbine manufacturers, material suppliers, government laboratories and universities. Work is currently ongoing on thermal barrier coatings (TBCs), the scale-up of single-crystal airfoil manufacturing technologies, materials characterization and technology information exchange. Westinghouse Power Generation and Pratt and Whitney each have material programs to develop dependable TBCs that enable increased turbine inlet temperatures while maintaining airfoil substrate temperatures at levels to meet the ATS life goals. Howmet and PCC Airfoils each have projects to extend the capability of single-crystal complex-cored airfoil technology to larger sizes so that higher turbine inlet temperatures can be attained in land-based turbines in a cost-effective manner. Materials characterization tasks are ongoing on TBCs in support of the industrial projects. In addition, a project on long-term testing of ceramics and ceramic-matrix composites for gas turbines is being conducted in support of programs at Solar Turbines, Allison Engines, and Westinghouse Power Generation.

  2. Letter: Preliminary Sampling for Surface Soil at the Katy Trail Area.

    Office of Legacy Management (LM)

  3. NUG Meeting! Katie Antypas - NERSC-8 Project Lead NERSC-8 Project

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    p etaflop ( 10 15 o ps) r equires 3MW 3 GW for 1 E xaflop ( 10 18 o pssec) * DARPA c ommiee s uggested 2 00 M W w ith " usual" s caling goal usual scaling 2005 2010 2015 ...

  4. Reactor vessel support system. [LMFBR

    DOE Patents [OSTI]

    Golden, M.P.; Holley, J.C.

    1980-05-09

    A reactor vessel support system includes a support ring at the reactor top supported through a box ring on a ledge of the reactor containment. The box ring includes an annular space in the center of its cross-section to reduce heat flow and is keyed to the support ledge to transmit seismic forces from the reactor vessel to the containment structure. A coolant channel is provided at the outside circumference of the support ring to supply coolant gas through the keyways to channels between the reactor vessel and support ledge into the containment space.

  5. Carbon cloth supported electrode

    DOE Patents [OSTI]

    Lu, Wen-Tong P. (Upper St. Clair, PA); Ammon, Robert L. (Baldwin both of, PA)

    1982-01-01

    A flow-by anode is disclosed made by preparing a liquid suspension of about to about 18% by weight solids, the solids comprising about 3.5 to about 8% of a powdered catalyst of platinum, palladium, palladium oxide, or mixtures thereof; about 60 to about 76% carbon powder (support) having a particle size less than about 20 m.mu.m and about 20 to about 33% of an inert binder having a particle size of less than about 500 m.mu.m. A sufficient amount of the suspension is poured over a carbon cloth to form a layer of solids about 0.01 to about 0.05 cm thick on the carbon cloth when the electrode is completed. A vacuum was applied to the opposite side of the carbon cloth to remove the liquid and the catalyst layer/cloth assembly is dried and compressed at about 10 to about 50 MPa's. The binder is then sintered in an inert atmosphere to complete the electrode. The electrode is used for the oxidation of sulfur dioxide in a sulfur based hybrid cycle for the decomposition of water.

  6. Thermionic converter emitter support arrangement

    SciTech Connect (OSTI)

    Allen, D.T.

    1990-05-22

    This patent describes a support provided for use in a therminonic converter to support an end of an emitter to keep it out of contact with a surrounding collector while allowing the emitter end to move axially as its temperature changes. The emitter end is supported by a spring structure that includes a pair of Belleville springs, and the spring structure is supported by a support structure fixed to the housing that includes the collector. The support structure is in the form of a sandwich with a small metal spring-engaging element at the front end, a larger metal main support at the rear end that is attached to the housing, and with a ceramic layer between them that is bonded by hot isostatic pressing to the metal element and metal main support. The spring structure can include a loose wafer captured between the Belleville springs.

  7. Thermionic converter emitter support arrangement

    SciTech Connect (OSTI)

    Allen, D.T.

    1989-07-06

    This document discusses a support provided for use in a thermionic converter to support an end of an emitter to keep it out of contact with a surrounding collector while allowing the emitter end to move axially as its temperature changes. The emitter end is supported by a spring structure that includes a pair of Belleville springs, and the spring structure is supported by a support structure fixed to the housing that includes the collector. The support structure is in the form of a sandwich with a small metal spring-engaging element at the front end, a larger metal main support at the rear end that is attached to the housing, and with a ceramic layer between them that is bonded by hot isostatic pressing to the metal element and metal main support. The spring structure can include a loose wafer captured between the Belleville springs. 7 figs.

  8. Thermionic converter emitter support arrangement

    SciTech Connect (OSTI)

    Allen, Daniel T.

    1990-01-01

    A support is provided for use in a thermionic converter to support an end an emitter to keep it out of contact with a surrounding collector while allowing the emitter end to move axially at its temperatures changes. The emitter end (34) is supported by a spring structure (44) that includes a pair of Belleville springs, and the spring structure is supported by a support structure (42) fixed to the housing that includes the collector. The support structure is in the form of a sandwich with a small metal spring-engaging element (74) at the front end, a larger metal main support (76) at the rear end that is attached to the housng, and with a ceramic layer (80) between them that is bonded by hot isostatic pressing to the metal element and metal main support. The spring structure can include a loose wafer (120) captured between the Belleville springs.

  9. Thermionic converter emitter support arrangement

    SciTech Connect (OSTI)

    Allen, Daniel T.

    1990-01-01

    A support is provided for use in a therminonic converter to support an end of an emitter to keep it out of contact with a surrounding collector while allowing the emitter end to move axially as its temperature changes. The emitter end (34) is supported by a spring structure (44) that includes a pair of Belleville springs, and the spring structure is supported by a support structure (42) fixed to the housing that includes the collector. The support structure is in the form of a sandwich with a small metal spring-engaging element (74) at the front end, a larger metal main support (76) at the rear end that is attached to the housing, and with a ceramic layer (80) between them that is bonded by hot isostatic pressing to the metal element and metal main support. The spring structure can include a loose wafer (120) captured between the Belleville springs.

  10. Thermionic converter emitter support arrangement

    SciTech Connect (OSTI)

    Allen, D.T.

    1990-10-16

    A support is presented for use in a thermionic converted to support an end of an emitter to keep it out of contact with a surrounding collector while allowing the emitter end to move axially at its temperatures changes. The emitter end is supported by a spring structure that includes a pair of Belleville springs, and the spring structure is supported by a support structure fixed to the housing that includes the collector. The support structure is in the form of a sandwich with a small metal spring-engaging element at the front end, a large metal main support at the rear end that is attached to the housing, and metal main support. The spring structure can include a loose wafer captured between the Belleville springs.

  11. Supporting biosurveillance via the web

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Supporting biosurveillance via the web Supporting biosurveillance via the web A new online resource is providing a centralized portal for all news, information, resources and research related to biosurveillance at the laboratory. January 28, 2015 The site offers a variety of Los Alamos-developed biosurveillance tools that can be used for decision support in disease surveillance. The site offers a variety of Los Alamos-developed biosurveillance tools that can be used for decision support in

  12. DOE Selects Mission Support Alliance, LLC for Mission Support...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Systems, Westech International, TestAmerica, and Lampson International. "The final Central Plateau contract award to the Mission Support Alliance, LLC, positions the ...

  13. ASME Code Efforts Supporting HTGRs

    SciTech Connect (OSTI)

    D.K. Morton

    2012-09-01

    In 1999, an international collaborative initiative for the development of advanced (Generation IV) reactors was started. The idea behind this effort was to bring nuclear energy closer to the needs of sustainability, to increase proliferation resistance, and to support concepts able to produce energy (both electricity and process heat) at competitive costs. The U.S. Department of Energy has supported this effort by pursuing the development of the Next Generation Nuclear Plant, a high temperature gas-cooled reactor. This support has included research and development of pertinent data, initial regulatory discussions, and engineering support of various codes and standards development. This report discusses the various applicable American Society of Mechanical Engineers (ASME) codes and standards that are being developed to support these high temperature gascooled reactors during construction and operation. ASME is aggressively pursuing these codes and standards to support an international effort to build the next generation of advanced reactors so that all can benefit.

  14. ASME Code Efforts Supporting HTGRs

    SciTech Connect (OSTI)

    D.K. Morton

    2011-09-01

    In 1999, an international collaborative initiative for the development of advanced (Generation IV) reactors was started. The idea behind this effort was to bring nuclear energy closer to the needs of sustainability, to increase proliferation resistance, and to support concepts able to produce energy (both electricity and process heat) at competitive costs. The U.S. Department of Energy has supported this effort by pursuing the development of the Next Generation Nuclear Plant, a high temperature gas-cooled reactor. This support has included research and development of pertinent data, initial regulatory discussions, and engineering support of various codes and standards development. This report discusses the various applicable American Society of Mechanical Engineers (ASME) codes and standards that are being developed to support these high temperature gascooled reactors during construction and operation. ASME is aggressively pursuing these codes and standards to support an international effort to build the next generation of advanced reactors so that all can benefit.

  15. ASME Code Efforts Supporting HTGRs

    SciTech Connect (OSTI)

    D.K. Morton

    2010-09-01

    In 1999, an international collaborative initiative for the development of advanced (Generation IV) reactors was started. The idea behind this effort was to bring nuclear energy closer to the needs of sustainability, to increase proliferation resistance, and to support concepts able to produce energy (both electricity and process heat) at competitive costs. The U.S. Department of Energy has supported this effort by pursuing the development of the Next Generation Nuclear Plant, a high temperature gas-cooled reactor. This support has included research and development of pertinent data, initial regulatory discussions, and engineering support of various codes and standards development. This report discusses the various applicable American Society of Mechanical Engineers (ASME) codes and standards that are being developed to support these high temperature gascooled reactors during construction and operation. ASME is aggressively pursuing these codes and standards to support an international effort to build the next generation of advanced reactors so that all can benefit.

  16. Supporting biosurveillance via the web

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Supporting biosurveillance via the web Alumni Link: Opportunities, News and Resources for Former Employees Latest Issue:September 2015 all issues All Issues » submit Supporting biosurveillance via the web A new online resource is providing a centralized portal for all news, information, resources and research related to biosurveillance at the laboratory. March 1, 2015 The site offers a variety of Los Alamos-developed biosurveillance tools that can be used for decision support in disease

  17. Supported liquid membrane electrochemical separators

    DOE Patents [OSTI]

    Pemsler, J. Paul; Dempsey, Michael D.

    1986-01-01

    Supported liquid membrane separators improve the flexibility, efficiency and service life of electrochemical cells for a variety of applications. In the field of electrochemical storage, an alkaline secondary battery with improved service life is described in which a supported liquid membrane is interposed between the positive and negative electrodes. The supported liquid membranes of this invention can be used in energy production and storage systems, electrosynthesis systems, and in systems for the electrowinning and electrorefining of metals.

  18. Los Alamos National Security supports

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    supports community nonprofits June 1, 2009 Recognition event Tuesday at Fuller Lodge LOS ALAMOS, New Mexico, June 1, 2009 - Nonprofit organizations are receiving more than 80,300...

  19. ORISE: Training and Technology Support

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Support ORISE helps train all levels of government personnel for natural disasters and man-made emergencies using latest technology The Oak Ridge Institute for Science and...

  20. Mission | APS Engineering Support Division

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    mission, the APS Engineering Support Division provides: Highly reliable, state-of-the-art computer infrastructure to meet the needs of the APS. Leading-edge information...

  1. Instructions for the Supporting Statement

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    C:\Documents and Settings\loganla\Local Settings\Temporary Internet Files\Content.Outlook\UZP4FQGA\Instructions for the Supporting Statementrev-includes BH table.doc General Instructions A Supporting Statement must accompany each request for approval of a collection of information. The Supporting Statement must be prepared in the format described below. If an item is not applicable, provide a brief explanation. When Item 17 of the OMB 83-I is checked "YES", Section B of the Supporting

  2. Ergonomically neutral arm support system

    DOE Patents [OSTI]

    Siminovitch, Michael J; Chung, Jeffrey Y; Dellinges, Steven; Lafever, Robin E

    2005-08-02

    An ergonomic arm support system maintains a neutral position for the forearm. A mechanical support structure attached to a chair or other mounting structure supports the arms of a sitting or standing person. The system includes moving elements and tensioning elements to provide a dynamic balancing force against the forearms. The support structure is not fixed or locked in a rigid position, but is an active dynamic system that is maintained in equipoise by the continuous operation of the opposing forces. The support structure includes an armrest connected to a flexible linkage or articulated or pivoting assembly, which includes a tensioning element such as a spring. The pivoting assembly moves up and down, with the tensioning element providing the upward force that balances the downward force of the arm.

  3. Thermally stable nanoparticles on supports

    DOE Patents [OSTI]

    Roldan Cuenya, Beatriz; Naitabdi, Ahmed R.; Behafarid, Farzad

    2012-11-13

    An inverse micelle-based method for forming nanoparticles on supports includes dissolving a polymeric material in a solvent to provide a micelle solution. A nanoparticle source is dissolved in the micelle solution. A plurality of micelles having a nanoparticle in their core and an outer polymeric coating layer are formed in the micelle solution. The micelles are applied to a support. The polymeric coating layer is then removed from the micelles to expose the nanoparticles. A supported catalyst includes a nanocrystalline powder, thin film, or single crystal support. Metal nanoparticles having a median size from 0.5 nm to 25 nm, a size distribution having a standard deviation .ltoreq.0.1 of their median size are on or embedded in the support. The plurality of metal nanoparticles are dispersed and in a periodic arrangement. The metal nanoparticles maintain their periodic arrangement and size distribution following heat treatments of at least 1,000.degree. C.

  4. Self advancing mine roof supports

    SciTech Connect (OSTI)

    Seddon, J.; Jones, F.

    1985-03-19

    A self-advancing mine-roof-support for use in or aligned with a main roadway or gate has a floor-engaging part and a roof engaging part spaced apart by extensible load-bearing prop or jack means, and engagement means for a face-conveyor and a transversely acting transfer conveyor whereby their relative positions are constrained to facilitate discharge of mineral from one conveyor to the other. The engagement means for the face conveyor comprises sliding anchor beams that assure maintenance of the relative attitudes of the support and the face conveyor and the transfer conveyor is held fore and aft of the support.

  5. DOE Awards Support Service Contract | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    limited to: Secretarial and Administrative Support Contract Procurement Support Human Resource Support Records Management FOIAPrivacy Act Support Public Participation Support...

  6. Support - Facilities - Radiation Effects Facility / Cyclotron...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Chamber In-Air Station Software Support Support During experiments at the Radiation Effects Facility users are assisted by the experienced on-site support staff. Our...

  7. Support Facilities | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Support Facilities Support Facilities The Y-12 site comprises more than 250 non-production facilities that help support ongoing and planned missions. We continue to maintain and...

  8. Photocatalytic reactor with flexible supports

    DOE Patents [OSTI]

    Jacoby, William A.; Blake, Daniel M.

    1995-01-01

    Organic pollutants and bioaerosols in a gaseous stream are oxidized by exposure to light (e.g., UV light) in the presence of semiconductor catalyst particles or coatings supported on flexible strips suspended in the gaseous stream.

  9. Photocatalytic reactor with flexible supports

    DOE Patents [OSTI]

    Jacoby, W.A.; Blake, D.M.

    1995-09-12

    Organic pollutants and bioaerosols in a gaseous stream are oxidized by exposure to light (e.g., UV light) in the presence of semiconductor catalyst particles or coatings supported on flexible strips suspended in the gaseous stream. 3 figs.

  10. DOE: Support Implementation of EEOICPA

    Broader source: Energy.gov [DOE]

    DOE’s primary role in the EEOICPA is to provide records to DOL, NIOSH and DOJ, to support claim processing, dose reconstruction and ultimately claim adjudication. The worker records provided by...

  11. Supported molten-metal catalysts

    DOE Patents [OSTI]

    Datta, Ravindra; Singh, Ajeet; Halasz, Istvan; Serban, Manuela

    2001-01-01

    An entirely new class of catalysts called supported molten-metal catalysts, SMMC, which can replace some of the existing precious metal catalysts used in the production of fuels, commodity chemicals, and fine chemicals, as well as in combating pollution. SMMC are based on supporting ultra-thin films or micro-droplets of the relatively low-melting (<600.degree. C.), inexpensive, and abundant metals and semimetals from groups 1, 12, 13, 14, 15 and 16, of the periodic table, or their alloys and intermetallic compounds, on porous refractory supports, much like supported microcrystallites of the traditional solid metal catalysts. It thus provides orders of magnitude higher surface area than is obtainable in conventional reactors containing molten metals in pool form and also avoids corrosion. These have so far been the chief stumbling blocks in the application of molten metal catalysts.

  12. Lab supports multiethnic science careers

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    supports multiethnic science careers Community Connections: Your link to news and opportunities from Los Alamos National Laboratory Latest Issue:May 2016 all issues All Issues » submit Lab supports multi-ethnic science careers Pilot program prepares regional students for national conference November 1, 2013 Society for Advancement of Chicanos and Native Americans in Science Society for Advancement of Chicanos and Native Americans in Science Contact Community Programs Office Director Kurt

  13. Strong Support for MOX Continues

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Strong Support for MOX Continues Community leaders in the region continued vocal support for DOE's Mixed Oxide Fuel (MOX) project during the year. The project is vital because of its contribution to energy independence and national security and for the job- creating opportunities it creates in our region. When completed, the MOX facility will convert weapons- grade plutonium to nuclear reactor fuel assemblies. These assemblies will then be used as fuel in commercial nuclear power reactors to

  14. LANL Nuclear Safety Support Services

    Broader source: Energy.gov [DOE]

    Due to recent changes directed by the Secretary of Energy, the EM-funded legacy cleanup scope of work under the current LANL Management and Operating (M&O) contract is undergoing a transition from NNSA oversight and management to DOE EM. As a result of the transition, EM will be conducting one or more procurements in support of the EM Los Alamos Legacy Cleanup Completion Project (LCCP). EM has a requirement for contract support to aid in the accomplishment of the procurement(s).

  15. Supporting collaborative computing and interaction

    SciTech Connect (OSTI)

    Agarwal, Deborah; McParland, Charles; Perry, Marcia

    2002-05-22

    To enable collaboration on the daily tasks involved in scientific research, collaborative frameworks should provide lightweight and ubiquitous components that support a wide variety of interaction modes. We envision a collaborative environment as one that provides a persistent space within which participants can locate each other, exchange synchronous and asynchronous messages, share documents and applications, share workflow, and hold videoconferences. We are developing the Pervasive Collaborative Computing Environment (PCCE) as such an environment. The PCCE will provide integrated tools to support shared computing and task control and monitoring. This paper describes the PCCE and the rationale for its design.

  16. DOE Awards Support Service Contract

    Broader source: Energy.gov [DOE]

    Cincinnati - The U.S. Department of Energy (DOE) announced an award today which was made under the National Nuclear Security Administration (NNSA)’s Technical, Engineering, and Programmatic Support Services (TEPS) Blanket Purchase Agreement (BPA) DE-NA0001224 to Link Technologies, Inc., of Germantown, MD.

  17. Management of Support Services Activities

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1991-05-17

    To provide the policy, procedures, and responsibilities for the management of support services contracts with the Department of Energy (DOE). Cancels DOE O 4200.3B dated 10-3-85. Chg 1 dated 3-26-92. Canceled by DOE O 4200.3D dated 8-31-92.

  18. Peg supported thermal insulation panel

    DOE Patents [OSTI]

    Nowobilski, J.J.; Owens, W.J.

    1985-04-30

    A thermal insulation panel which is lightweight, load bearing, accommodates thermal stress, and has excellent high temperature insulation capability comprises high performance insulation between thin metal walls supported by high density, high strength glass pegs made in compliance with specified conditions of time, temperature and pressure. 2 figs.

  19. Peg supported thermal insulation panel

    DOE Patents [OSTI]

    Nowobilski, Jeffert J.; Owens, William J.

    1985-01-01

    A thermal insulation panel which is lightweight, load bearing, accommodates thermal stress, and has excellent high temperature insulation capability comprising high performance insulation between thin metal walls supported by high density, high strength glass pegs made in compliance with specified conditions of time, temperature and pressure.

  20. SUPPORTING AND HEAT INSULATING MEANS

    DOE Patents [OSTI]

    Birmingham, B.W.; Brown, H.; Scott, R.B.; Vander-arend, P.C.

    1959-01-27

    A method is described for simultaneously supporting inner and outer members spaced from each other and heat insulating them from each other comprising an inner and outer member together defining an annular cavity. Each member carries a shoulder projecting towards the other member. A stack of annular metal plates in the cavity is held between the shoulder of the outer member and the shoulder of the inner member. The edges of the metal plate forming the stack are exposed to the cavity and to evacuation conditions which may exist within thc cavity. The stack of metal plates acts to both support one of the members with respect to the other and as a heat insulator.

  1. State Support of Domestic Production

    SciTech Connect (OSTI)

    Amy Wright

    2007-12-30

    This project was developed in response to a cooperative agreement offering by the U.S. Department of Energy (DOE) and the National Energy Technology Laboratory (NETL) under the State Support of Domestic Production DE-FC26-04NT15456. The Interstate Oil and Gas Compact Commission (IOGCC) performed efforts in support of State programs related to the security, reliability and growth if our nation's domestic production of oil and natural gas. The project objectives were to improve the States ability to monitor the security of oil and gas operations; to maximize the production of domestic oil and natural gas thereby minimizing the threat to national security posed by interruptions in energy imports; to assist States in developing and maintaining high standards of environmental protection; to assist in addressing issues that limit the capacity of the industry; to promote the deployment of the appropriate application of technology for regulatory efficiency; and to inform the public about emerging energy issues.

  2. Mission Support Contract Section J

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Contract No. DE-AC06-09RL14728 Modification 298 1 ATTACHMENT J-4-d Mission Support Contract FY 2013 Performance Evaluation and Measurement Plan The Performance Evaluation and Measurement Plan (PEMP) details the administration of performance incentives and allocation of total available fee as defined in Section B, Supplies or Services and Prices/Costs. 1. PERFORMANCE INCENTIVES This PEMP contains both objective and subjective performance incentives in order to maximize the efficacy of the

  3. ELECTRICAL SUPPORT SYSTEM DESCRIPTION DOCUMENT

    SciTech Connect (OSTI)

    S. Roy

    2004-06-24

    The purpose of this revision of the System Design Description (SDD) is to establish requirements that drive the design of the electrical support system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience/users are design engineers. This type of SDD both ''leads'' and ''trails'' the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD trails the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to electrical support systems are obtained from the ''Project Functional and Operational Requirements'' (F&OR) (Siddoway 2003). Other requirements to support the design process have been taken from higher-level requirements documents such as the ''Project Design Criteria Document'' (PDC) (Doraswamy 2004), and fire hazards analyses. The above-mentioned low-level documents address ''Project Requirements Document'' (PRD) (Canon and Leitner 2003) requirements. This SDD contains several appendices that include supporting information. Appendix B lists key system charts, diagrams, drawings, and lists, and Appendix C includes a list of system procedures.

  4. Pressure vessel sliding support unit and system using the sliding support unit

    DOE Patents [OSTI]

    Breach, Michael R.; Keck, David J.; Deaver, Gerald A.

    2013-01-15

    Provided is a sliding support and a system using the sliding support unit. The sliding support unit may include a fulcrum capture configured to attach to a support flange, a fulcrum support configured to attach to the fulcrum capture, and a baseplate block configured to support the fulcrum support. The system using the sliding support unit may include a pressure vessel, a pedestal bracket, and a plurality of sliding support units.

  5. Mounting support for a photovoltaic module

    DOE Patents [OSTI]

    Brandt, Gregory Michael; Barsun, Stephan K.; Coleman, Nathaniel T.; Zhou, Yin

    2013-03-26

    A mounting support for a photovoltaic module is described. The mounting support includes a foundation having an integrated wire-way ledge portion. A photovoltaic module support mechanism is coupled with the foundation.

  6. Supported organoiridium catalysts for alkane dehydrogenation

    DOE Patents [OSTI]

    Baker, R. Thomas; Sattelberger, Alfred P.; Li, Hongbo

    2013-09-03

    Solid supported organoiridium catalysts, a process for preparing such solid supported organoiridium catalysts, and the use of such solid supported organoiridium catalysts in dehydrogenation reactions of alkanes is provided. The catalysts can be easily recovered and recycled.

  7. Substrate interactions with suspended and supported monolayer...

    Office of Scientific and Technical Information (OSTI)

    and supported monolayer MoS2: Angle-resolved photoemission spectroscopy Title: Substrate interactions with suspended and supported monolayer MoS2: Angle-resolved ...

  8. LANL Support and Commitment to Small Businesses

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    LANL Support and Commitment to Small Businesses LANL Support and Commitment to Small Businesses Los Alamos National Laboratory has maintained a strong institutional commitment to...

  9. PROJECT PROFILE: Support of International Photovoltaic Module...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Support of International Photovoltaic Module Quality Assurance Task Force (PVQAT) PROJECT PROFILE: Support of International Photovoltaic Module Quality Assurance Task Force (PVQAT) ...

  10. Clean Cities Regional Support & Petroleum Displacement Awards...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Regional Support & Petroleum Displacement Awards Clean Cities Regional Support & Petroleum Displacement Awards 2009 DOE Hydrogen Program and Vehicle Technologies Program Annual ...

  11. Decision Support Tool: Integrated REDD+ accounting frameworks...

    Open Energy Info (EERE)

    Decision Support Tool: Integrated REDD+ accounting frameworks: Nested national approaches Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Decision Support Tool:...

  12. Support apparatus for semiconductor wafer processing

    DOE Patents [OSTI]

    Griffiths, Stewart K.; Nilson, Robert H.; Torres, Kenneth J.

    2003-06-10

    A support apparatus for minimizing gravitational stress in semiconductor wafers, and particularly silicon wafers, during thermal processing. The support apparatus comprises two concentric circular support structures disposed on a common support fixture. The two concentric circular support structures, located generally at between 10 and 70% and 70 and 100% and preferably at 35 and 82.3% of the semiconductor wafer radius, can be either solid rings or a plurality of spaced support points spaced apart from each other in a substantially uniform manner. Further, the support structures can have segments removed to facilitate wafer loading and unloading. In order to withstand the elevated temperatures encountered during semiconductor wafer processing, the support apparatus, including the concentric circular support structures and support fixture can be fabricated from refractory materials, such as silicon carbide, quartz and graphite. The claimed wafer support apparatus can be readily adapted for use in either batch or single-wafer processors.

  13. NREL Research Support Facilities (RSF)

    High Performance Buildings Database

    Golden, CO NREL's Research Support Facilities building (RSF) will be a total of 218,000 sq. feet. It will have two parallel secured employee wings, one of which will be 4 stories and the other 3 stories. A connector building housing most of the public spaces will run perpendicular through both wings. The RSF will provide workspace for 742 employees. The RSF is designed to be a zero energy building through the use of innovative energy efficiency, daylighting, and renewable energy strategies, including photovoltaic solar electric systems to generate electricity.

  14. Air Risk Information Support Center

    SciTech Connect (OSTI)

    Shoaf, C.R.; Guth, D.J.

    1990-12-31

    The Air Risk Information Support Center (Air RISC) was initiated in early 1988 by the US Environmental Protection Agency`s (EPA) Office of Health and Environmental Assessment (OHEA) and the Office of Air Quality Planning and Standards (OAQPS) as a technology transfer effort that would focus on providing information to state and local environmental agencies and to EPA Regional Offices in the areas of health, risk, and exposure assessment for toxic air pollutants. Technical information is fostered and disseminated by Air RISCs three primary activities: (1) a {open_quotes}hotline{close_quotes}, (2) quick turn-around technical assistance projects, and (3) general technical guidance projects. 1 ref., 2 figs.

  15. DNA attachment to support structures

    DOE Patents [OSTI]

    Balhorn, Rodney L.; Barry, Christopher H.

    2002-01-01

    Microscopic beads or other structures are attached to nucleic acids (DNA) using a terminal transferase. The transferase adds labeled dideoxy nucleotide bases to the ends of linear strands of DNA. The labels, such as the antigens digoxigenin and biotin, bind to the antibody compounds or other appropriate complementary ligands, which are bound to the microscopic beads or other support structures. The method does not require the synthesis of a synthetic oligonucleotide probe. The method can be used to tag or label DNA even when the DNA has an unknown sequence, has blunt ends, or is a very large fragment (e.g., >500 kilobase pairs).

  16. Analysis Efforts Supporting NSTX Upgrades

    SciTech Connect (OSTI)

    H.Zhang, P. Titus, P. Rogoff, A.Zolfaghari, D. Mangra, M. Smith

    2010-11-29

    The National Spherical Torus Experiment (NSTX) is a low aspect ratio, spherical torus (ST) configuration device which is located at Princeton Plasma Physics Laboratory (PPPL) This device is presently being updated to enhance its physics by doubling the TF field to 1 Tesla and increasing the plasma current to 2 Mega-amperes. The upgrades include a replacement of the centerstack and addition of a second neutral beam. The upgrade analyses have two missions. The first is to support design of new components, principally the centerstack, the second is to qualify existing NSTX components for higher loads, which will increase by a factor of four. Cost efficiency was a design goal for new equipment qualification, and reanalysis of the existing components. Showing that older components can sustain the increased loads has been a challenging effort in which designs had to be developed that would limit loading on weaker components, and would minimize the extent of modifications needed. Two areas representing this effort have been chosen to describe in more details: analysis of the current distribution in the new TF inner legs, and, second, analysis of the out-of-plane support of the existing TF outer legs.

  17. Hook nozzle arrangement for supporting airfoil vanes

    DOE Patents [OSTI]

    Shaffer, J.E.; Norton, P.F.

    1996-02-20

    A gas turbine engine`s nozzle structure includes a nozzle support ring, a plurality of shroud segments, and a plurality of airfoil vanes. The plurality of shroud segments are distributed around the nozzle support ring. Each airfoil vane is connected to a corresponding shroud segment so that the airfoil vanes are also distributed around the nozzle support ring. Each shroud segment has a hook engaging the nozzle support ring so that the shroud segments and corresponding airfoil vanes are supported by the nozzle support ring. The nozzle support ring, the shroud segments, and the airfoil vanes may be ceramic. 8 figs.

  18. Hook nozzle arrangement for supporting airfoil vanes

    DOE Patents [OSTI]

    Shaffer, James E.; Norton, Paul F.

    1996-01-01

    A gas turbine engine's nozzle structure includes a nozzle support ring, a plurality of shroud segments, and a plurality of airfoil vanes. The plurality of shroud segments are distributed around the nozzle support ring. Each airfoil vane is connected to a corresponding shroud segment so that the airfoil vanes are also distributed around the nozzle support ring. Each shroud segment has a hook engaging the nozzle support ring so that the shroud segments and corresponding airfoil vanes are supported by the nozzle support ring. The nozzle support ring, the shroud segments, and the airfoil vanes may be ceramic.

  19. Compact submanifolds supporting singular interactions

    SciTech Connect (OSTI)

    Kaynak, Burak Tevfik Teoman Turgut, O.

    2013-12-15

    A quantum particle moving under the influence of singular interactions on embedded surfaces furnish an interesting example from the spectral point of view. In these problems, the possible occurrence of a bound-state is perhaps the most important aspect. Such systems can be introduced as quadratic forms and generically they do not require renormalization. Yet an alternative path through the resolvent is also beneficial to study various properties. In the present work, we address these issues for compact surfaces embedded in a class of ambient manifolds. We discover that there is an exact bound state solution written in terms of the heat kernel of the ambient manifold for a range of coupling strengths. Moreover, we develop techniques to estimate bounds on the ground state energy when several surfaces, each of which admits a bound state solution, coexist. -- Highlights: Schrdinger operator with singular interactions supported on compact submanifolds. Exact bound-state solution in terms of the heat kernel of the ambient manifold. Generalization of the variational approach to a collection of submanifolds. Existence of a lower bound for a unique ground state energy.

  20. LANL Nuclear Safety Support Services IDIQ Contract

    Broader source: Energy.gov [DOE]

    The scope of this contract will consist of technical support services needed to support the development and implementation of Documented Safety Analysis for EM operations facilities at LANL, such as Technical Area 54 Area G.

  1. SSRL Computer & Networking Support Requests

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CNG Help Request To use this form - Please enter your contact information below and select a category for your request. Also, provide a brief description of your request. When purchasing items, please include an account number. Priority*: Normal Urgent Requestor: (Name of person to contact for this request) Email: Phone: Support Required: I don't know Computer Support Network Support Printer Support Select Type of Request I don't know Details of your request: Property Control #: PC# Account

  2. Stabilized fuel with silica support structure

    SciTech Connect (OSTI)

    Poco, J.F.; Hrubesh, L.W.

    1991-12-31

    This report describes a stabilized fuel which is supported by a silica support structure. The silica support structure provides a low density, high porosity vehicle for safely carrying hydrocarbon fuels. The silica support structure for hydrocarbon fuel does not produce toxic material residues on combustion which would pose environmentally sensitive disposal problems. The silica stabilized fuel composition is useful as a low temperature, continuous burning fire starter for wood or charcoal.

  3. ANS Standards to Support DOE NPH Design

    Broader source: Energy.gov [DOE]

    ANS Standards to Support DOE NPH Design DOE NPH Workshop, Germantown, MD Carl Mazzola, CFS October 22, 2014

  4. Techno-Economic Modeling, Analysis, and Support

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Techno-Economic Modeling, Analysis, and Support - Sandia ... Transportation Energy Co-Evolution of Biofuels ... Biological and Environmental Research Collaborations ...

  5. Deployment Support Leading to Implementation

    SciTech Connect (OSTI)

    E. E. Cook

    1997-10-01

    The following paragraphs summarize the progress of each research project funded under the WVU Cooperative Agreement during the third quarter of 1997 (July - September 1997). The projects are arranged according to their 1997 WVU task number. WVU Focus Area 1.0: Subsurface Contaminants, Containment and Remediation Task No. 1.1: Project discontinued. Task No. 1.2: Development of Standard Test Protocols and Barrier Design Models for Desiccation Barriers (K. Amininan & S. Ameri): A number of experiments were preformed this period to evaluate the ability of the dried sand-packs to act as a barrier to liquids. Water infiltration tests were done with a constant head, dispersing 80 ml of water, and by adding water in small increments. Results indicate that when the water is spilled over the sand-pack, it has the tendency to channel through the sand-pack, significantly reducing the capacity of the dried zone to retain liquid contaminants. This appears to be largely influenced by particle size. As the particle size is reduced, the capillary forces spread the water and prevent/delay channels from forming. The measured permeability values were in agreement with those measured with air. The water retention capacity and capillary rise were largely influenced by time and showed no sensitivity to channeling. The water retention capacity tests suggest the sand-packs can retain more water than the expected. Two sets of water infiltration and drying experiments were designed to evaluate the CAB�s ability to prevent spills from spreading. Ten ml of water was injected every 20 minutes and 80 ml of water was added at one time. When injected slowly, results showed the drying process to be similar to the original drying process. The second set indicted the drying process follows a slowly declining drying with no break through. Results also suggested that air flow through the sand-pack can remove water infiltration. The air flow appeared to prevent any water channeling and thus should cause lateral distribution of the water. The large tank that accommodates the sand bed and the necessary plumbing to simulate various well configurations was received. The monitoring equipment and the sensors are currently being installed. The experimental procedures for Phase II experiments are under further investigation and will be initiated upon installation of CATC and assembly of the monitoring system. Due to insufficient operating funds, the large scale experiments will not be done this year. Task No. 1.3: Technical Support - Development of Standard Test Protocols and Barrier Design Models for In Situ Formed Barriers (B. Overbey & D. Locke, BDM Federal): The Operating Permit Renewal Request for bench scale operations in the FETC B-17 building was submitted to the FETC Lab Safety Committee for approval on 8/14/97. A review of the revised NEPA documents prepared last year indicates that these documents are still applicable for the current work. The initial design and specifications for the CATC vessel were prepared. Construction of the CATC was initiated in early July, the vessel was received August 15, 1997, and on-site work was completed this quarter.

  6. Innovative secondary support systems for gate roads

    SciTech Connect (OSTI)

    Barczak, T.; Molinda, G.M.; Zelanko, J.C.

    1996-12-31

    With the development of the shield support, the primary requirement for successful ground control in longwall mining is to provide stable gate road and bleeder entries. Wood cribbing has been the dominant form of secondary and supplemental support. However, the cost and limited availability of timber, along with the poor performance of softwood crib supports, has forced western U.S. mines to explore the utilization of support systems other than conventional wood cribbing. The recent success of cable bolts has engendered much interest from western operators. Eastern U.S. coal operators are also now experimenting with various intrinsic and freestanding alternative support systems that provide effective ground control while reducing material handling costs and injuries. These innovative freestanding support systems include (1) {open_quotes}The Can{close_quotes} support by Burrell Mining Products International, Inc., (2) Hercules and Link-N-Lock wood cribs and Propsetter supports by Strata Products (USA) Inc., (3) Variable Yielding Crib and Power Crib supports by Mountainland Support Systems, (4) the Confined Core Crib developed by Southern Utah Fuels Corporation; and (5) the MEGA prop by MBK Hydraulik. This paper assesses design considerations and compares the performance and application of these alternative secondary support systems. Support performance in the form of load-displacement behavior is compared to conventional wood cribbing. Much of the data was developed through full-scale tests conducted by the U.S. Bureau of Mines (USBM) at the Strategic Structures Testing Laboratory in the unique Mine Roof Simulator load frame at the Pittsburgh Research Center. A summary of current mine experience with these innovative supports is also documented.

  7. Locking support for nuclear fuel assemblies

    DOE Patents [OSTI]

    Ledin, Eric

    1980-01-01

    A locking device for supporting and locking a nuclear fuel assembly within a cylindrical bore formed by a support plate, the locking device including a support and locking sleeve having upwardly extending fingers forming wedge shaped contact portions arranged for interaction between an annular tapered surface on the fuel assembly and the support plate bore as well as downwardly extending fingers having wedge shaped contact portions arranged for interaction between an annularly tapered surface on the support plate bore and the fuel assembly whereby the sleeve tends to support and lock the fuel assembly in place within the bore by its own weight while facilitating removal and/or replacement of the fuel assembly.

  8. Contracting for Support Services | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    » Contracting for Support Services Contracting for Support Services What you need to know as a Federal Employee The Department of Energy, like most Federal agencies, spends a significant amount of its contracting budget on support services. While these contracts fulfill continuing and essential needs of the Department, this type of contracting arrangement can present unique situations that require special diligence on the part of Federal employees to ensure that applicable statutes,

  9. Contracting for Support Services | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Contracting for Support Services Contracting for Support Services What you need to know as a Federal Employee The Department of Energy, like most Federal agencies, spends a significant amount of its contracting budget on support services. While these contracts fulfill continuing and essential needs of the Department, this type of contracting arrangement can present unique situations that require special diligence on the part of Federal employees to ensure that applicable statutes, regulations,

  10. DOE Extends Portsmouth Infrastructure Support Services Contract |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Portsmouth Infrastructure Support Services Contract DOE Extends Portsmouth Infrastructure Support Services Contract July 17, 2015 - 12:00pm Addthis Media Contact Brad Mitzelfelt, 859-219-4035 brad.mitzelfelt@lex.doe.gov LEXINGTON, Ky. - The U.S. Department of Energy (DOE) today announced that it is extending its contract for Infrastructure Support Services at the Portsmouth Gaseous Diffusion Plant site for a period of six months. The contract period for the current

  11. Jefferson Lab - Detector Support Group (DSG) Staff

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Search the JLab Site Nuclear Physics Program Please upgrade your browser. This site's design is only visible in a graphical browser that supports web standards, but its content is accessible to any browser. Concerns? Nuclear Physics Program DSG Home Staff Presentations Notes print version Experimental Halls Hall A Hall B Hall C Hall D Additional Links / Info Jefferson Lab Home Page Detector Support Group (DSG) Home The Detector Support Group (DSG), under the direction of Dr. Patrizia Rossi,

  12. LANL Support and Commitment to Small Businesses

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    LANL Support and Commitment to Small Businesses SUPPORT FOR SMALL BUSINESS SUBCONTRACTING OPPORTUNITIES Los Alamos National Laboratory has maintained a strong institutional commitment to small business subcontracting over the years. Small Business Office ASM-SBP 505-667-4419 Email SUPPORT FOR SUBCONTRACTING OPPORTUNITIES WITH SMALL BUSINESSES Los Alamos National Laboratory has maintained a strong institutional commitment to small business subcontracting over the years and it is my intention that

  13. Office of Environmental Protection, Sustainability Support &...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Functions Implements an integrated approach to customer and stakeholder needs in the development and maintenance of environmental policy. Provides technical support and assistance to ...

  14. Supporting Entrepreneurs for Sustainable Development (SEED) ...

    Open Energy Info (EERE)

    around the globe which integrate social and environmental benefits into their business model. The goal of SEED is to support the ability of such entrepreneurs to scale...

  15. Photographic Support Very Limited | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Photographic Support Very Limited Photographic Support Very Limited at Lab at This Time Jefferson Lab Public Affairs has extremely limited time to provide photographic support. Two forms of photographic support are currently available: 1. Sign out a camera from Public Affairs (PA) so that you (or your designee) can take the photos you or your department/work center need. 2. If the job requires professional-grade photos, notify PA of the need/photo job - preferably two weeks in advance - so a

  16. Innovative secondary support technologies for western mines

    SciTech Connect (OSTI)

    Barczak, T.M.; Molinda, G.M.

    1996-12-01

    With the development of the shield support, the primary requirement for successful ground control in longwall mining is to provide stable gate road and bleeder entries. Wood cribbing has been the dominant form of secondary support. However, the cost and limited availability of timber, along with the poor performance of softwood crib supports, has forced western U.S. mines to explore the utilization of other support systems. The recent success of cable bolts has engendered much interest from western operators. Several innovative freestanding support systems have been developed recently including: (1) {open_quotes}The Can{close_quotes} support by Burrell Mining Products International, Inc., (2) Hercules and Link-N-Lock wood cribs and Propsetter by Strata Products (USA) Inc., (3) Variable Yielding Crib and Power Crib supports by Mountainland Support Systems, (4) the Confined Core Crib developed by Southern Utah Fuels Corporation; and (5) the MEGA prop by MBK Hydraulik. This paper assesses design considerations and compares the performance and application of these alternative secondary support systems.

  17. NNSA & Nuclear Security Enterprise support nation's preparedness...

    National Nuclear Security Administration (NNSA)

    & Nuclear Security Enterprise support nation's preparedness Friday, February 5, 2016 - ... in the nation's preparedness against nuclear threats via the National Atmospheric ...

  18. Community Programs Office supports regional education

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New programs strengthen teachers' math and science teaching skills September 1, ... hands-on practice in chemistry and math that support Common Core State Standards adoption. ...

  19. Modular power converter having fluid cooled support

    DOE Patents [OSTI]

    Beihoff, Bruce C.; Radosevich, Lawrence D.; Meyer, Andreas A.; Gollhardt, Neil; Kannenberg, Daniel G.

    2005-09-06

    A support may receive one or more power electronic circuits. The support may aid in removing heat from the circuits through fluid circulating through the support. The support, in conjunction with other packaging features may form a shield from both external EMI/RFI and from interference generated by operation of the power electronic circuits. Features may be provided to permit and enhance connection of the circuitry to external circuitry, such as improved terminal configurations. Modular units may be assembled that may be coupled to electronic circuitry via plug-in arrangements or through interface with a backplane or similar mounting and interconnecting structures.

  20. Modular power converter having fluid cooled support

    DOE Patents [OSTI]

    Beihoff, Bruce C.; Radosevich, Lawrence D.; Meyer, Andreas A.; Gollhardt, Neil; Kannenberg, Daniel G.

    2005-12-06

    A support may receive one or more power electronic circuits. The support may aid in removing heat from the circuits through fluid circulating through the support. The support, in conjunction with other packaging features may form a shield from both external EMI/RFI and from interference generated by operation of the power electronic circuits. Features may be provided to permit and enhance connection of the circuitry to external circuitry, such as improved terminal configurations. Modular units may be assembled that may be coupled to electronic circuitry via plug-in arrangements or through interface with a backplane or similar mounting and interconnecting structures.

  1. Transmission Services Commercial Systems Support and Development

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Call Agenda This customer conference call will provide updates concerning BPA Transmission Services' commercial systems support and development efforts. It will also provide...

  2. Supporting Small Forest Enterprises: A Facilitator's Toolkit...

    Open Energy Info (EERE)

    Small Forest Enterprises: A Facilitator's Toolkit Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Supporting Small Forest Enterprises: A Facilitator's Toolkit Agency...

  3. Annual Technology Baseline (Including Supporting Data); NREL...

    Office of Scientific and Technical Information (OSTI)

    Annual Technology Baseline (Including Supporting Data); NREL (National Renewable Energy Laboratory) Citation Details In-Document Search Title: Annual Technology Baseline ...

  4. Transmission Services Commercial Systems Support and Development

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Commercial Systems Support and Development Customer Conference Call Agenda This customer conference call will provide updates concerning BPA Transmission Services' commercial...

  5. Program Support From Socially Responsible Investing | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Support From Socially Responsible Investing Better Buildings Residential Financing and Revenue Peer Exchange Call Series: Socially Responsible Investing, Call Slides and Discussion...

  6. Browse by Discipline -- E-print Network Subject Pathways: --...

    Office of Scientific and Technical Information (OSTI)

    of Neurobiology, Weizmann Institute of Science Ullman, Katie (Katie Ullman) - Huntsman Cancer Institute, University of Utah Ullmann, G. Matthias (G. Matthias Ullmann) - Lehrstuhl ...

  7. Operating Systems Support for Advanced Programming Languages

    SciTech Connect (OSTI)

    Kubiatowicz, John

    2012-10-29

    As machines grow in scale and complexity, techniques to make the most effective use of network, memory, and processor resources will also become increasingly important. Programming models that rely on one-sided communication or global address space support have demonstrated advantages for productivity and performance, but they are most effective when used with proper OS support. We propose to develop OS and runtime support for programming models like UPC, GA, Charm++, and HPCS languages, which rely on one-sided communication. Rather than a full OS model, we envision applications bundled with only the necessary OS functions linked in to the application in user space -- relying on the hypervisor for protaction, resource sharing, and mangagement of Quality of Service guarantees. Our services will include support for remote reads and writes to memory, along with remote active message handlers, which are essential for support of fast noncontiguous memory operations, atomic operations, and event-driven applications.

  8. Vane segment support and alignment device

    DOE Patents [OSTI]

    McLaurin, L.D.; Sizemore, J.D.

    1999-07-13

    A support and alignment assembly for supporting and aligning a vane segment is provided. The support and alignment assembly comprises a torque plate which defines an opening for receiving an eccentric pin and a locking end member for receiving a lock socket member. An eccentric pin adjustably supported by the torque plate opening for supporting and aligning a vane segment is provided. A lock socket member adapted to securely receive the eccentric pin and rotated therewith, and adjustably engage the torque plate locking end is provided. The lock socket member receives the eccentric pin, such that when the eccentric pin is adjusted to align the vane segment, the lock socket member engages the torque plate locking end to secure the vane segment in the desired position. 5 figs.

  9. Vane segment support and alignment device

    DOE Patents [OSTI]

    McLaurin, Leroy Dixon; Sizemore, John Derek

    1999-01-01

    A support and alignment assembly for supporting and aligning a vane segment is provided. The support and alignment assembly comprises a torque plate which defines an opening for receiving an eccentric pin and a locking end member for receiving a lock socket member. An eccentric pin adjustably supported by the torque plate opening for supporting and aligning a vane segment is provided. A lock socket member adapted to securely receive the eccentric pin and rotated therewith, and adjustably engage the torque plate locking end is provided. The lock socket member receives the eccentric pin, such that when the eccentric pin is adjusted to align the vane segment, the lock socket member engages the torque plate locking end to secure the vane segment in the desired position.

  10. DOE Selects Mission Support Alliance, LLC for Mission Support Contract at

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    its Hanford Site | Department of Energy Mission Support Alliance, LLC for Mission Support Contract at its Hanford Site DOE Selects Mission Support Alliance, LLC for Mission Support Contract at its Hanford Site September 3, 2008 - 3:20pm Addthis WASHINGTON, DC - The U.S. Department of Energy (DOE) today announced the Mission Support Alliance, LLC has been selected as the mission support contractor for DOE's Hanford Site in southeastern Washington State. The contract is a cost-plus award-fee

  11. Characterization of the metal-support interface in supported metal and supported metal complex catalysts. [Final report

    SciTech Connect (OSTI)

    Gates, B.C.

    1992-12-31

    Re and Ir carbonyls, and other compounds, were chosen as precursors. MgO, La{sub 2}O{sub 3}, zeolite NaX and KL, among others, were chosen as supports. EXAFS was used to study the metal-support interactions. Structures formed on almost fully dehydroxylated MgO by HRe(CO){sub 5}, and on MgO by Ir{sub 4}(CO){sub 12}, were studied. A metal-oxygen distance of 2.15 {angstrom} holds in for the metal-support interface in oxide-supported metal clusters following reduction in H{sub 2} above 450 C; for reduction below 350 C, the distance is 2.5--2.7 {angstrom}.

  12. Turbine nozzle/nozzle support structure

    DOE Patents [OSTI]

    Boyd, G.L.; Shaffer, J.E.

    1996-09-10

    An axial flow turbine`s nozzle/nozzle support structure is described having a cantilevered nozzle outer structure including an outer shroud and airfoil vanes extending radially inwardly therefrom, an inner shroud radially adjacent the inner end of the airfoil vanes and cooperatively disposed relative to the outer shroud to provide an annular fluid flow path, an inner and an outer support ring respectively arranged radially inside the inner shroud and axially adjacent a portion of the outer shroud, and pins extending through such portion and into the outer support ring. The inner support ring or inner shroud has a groove therein bounded by end walls for receiving and being axially abuttable with a locating projection from the adjacent airfoil vane, inner shroud, or inner support ring. The nozzle outer structure may comprise segments each of which has a single protrusion which is axially engageable with the outer support ring or, alternatively, a first and second protrusion which are arcuately and axially separated and which include axial openings therein whereby first and second protrusions on respective, arcuately adjacent nozzle segments have axial openings therein which are alignable with connector openings in the outer support ring and within each of such aligned openings a pin is receivable. The inner shroud may, likewise, comprise segments which, when assembled in operating configuration, have a 360 degree expanse. 6 figs.

  13. Turbine nozzle/nozzle support structure

    DOE Patents [OSTI]

    Boyd, Gary L.; Shaffer, James E.

    1995-01-01

    An axial flow turbine's nozzle/nozzle support structure having a cantilevered nozzle outer structure including an outer shroud and airfoil vanes extending radially inwardly therefrom, an inner shroud radially adjacent the inner end of the airfoil vanes and cooperatively disposed relative to the outer shroud to provide an annular fluid flow path, an inner and an outer support ring respectively arranged radially inside the inner shroud and axially adjacent a portion of the outer shroud, and pins extending through such portion and into the outer support ring. The inner support ring or inner shroud has a groove therein bounded by end walls for receiving and being axially abuttable with a locating projection from the adjacent airfoil vane, inner shroud, or inner support ring. The nozzle outer structure may comprise segments each of which has a single protrusion which is axially engageable with the outer support ring or, alternatively, a first and second protrusion which are arcuately and axially separated and which include axial openings therein whereby first and second protrusions on respective, arcuately adjacent nozzle segments have axial openings therein which are alignable with connector openings in the outer support ring and within each of such aligned openings a pin is receivable. The inner shroud may, likewise, comprise segments which, when assembled in operating configuration, have a 360 degree expanse.

  14. Turbine nozzle/nozzle support structure

    DOE Patents [OSTI]

    Boyd, Gary L.; Shaffer, James E.

    1996-01-01

    An axial flow turbine's nozzle/nozzle support structure having a cantilevered nozzle outer structure including an outer shroud and airfoil vanes extending radially inwardly therefrom, an inner shroud radially adjacent the inner end of the airfoil vanes and cooperatively disposed relative to the outer shroud to provide an annular fluid flow path, an inner and an outer support ring respectively arranged radially inside the inner shroud and axially adjacent a portion of the outer shroud, and pins extending through such portion and into the outer support ring. The inner support ring or inner shroud has a groove therein bounded by end walls for receiving and being axially abuttable with a locating projection from the adjacent airfoil vane, inner shroud, or inner support ring. The nozzle outer structure may comprise segments each of which has a single protrusion which is axially engageable with the outer support ring or, alternatively, a first and second protrusion which are arcuately and axially separated and which include axial openings therein whereby first and second protrusions on respective, arcuately adjacent nozzle segments have axial openings therein which are alignable with connector openings in the outer support ring and within each of such aligned openings a pin is receivable. The inner shroud may, likewise, comprise segments which, when assembled in operating configuration, have a 360 degree expanse.

  15. Turbine nozzle/nozzle support structure

    DOE Patents [OSTI]

    Boyd, Gary L.; Shaffer, James E.

    1997-01-01

    An axial flow turbine's nozzle/nozzle support structure having a cantilevered nozzle outer structure including an outer shroud and airfoil vanes extending radially inwardly therefrom, an inner shroud radially adjacent the inner end of the airfoil vanes and cooperatively disposed relative to the outer shroud to provide an annular fluid flow path, an inner and an outer support ring respectively arranged radially inside the inner shroud and axially adjacent a portion of the outer shroud, and pins extending through such portion and into the outer support ring. The inner support ring or inner shroud has a groove therein bounded by end walls for receiving and being axially abuttable with a locating projection from the adjacent airfoil vane, inner shroud, or inner support ring. The nozzle outer structure may comprise segments each of which has a single protrusion which is axially engageable with the outer support ring or, alternatively, a first and second protrusion which are arcuately and axially separated and which include axial openings therein whereby first and second protrusions on respective, arcuately adjacent nozzle segments have axial openings therein which are alignable with connector openings in the outer support ring and within each of such aligned openings a pin is receivable. The inner shroud may, likewise, comprise segments which, when assembled in operating configuration, have a 360 degree expanse.

  16. Turbine nozzle/nozzle support structure

    DOE Patents [OSTI]

    Boyd, G.L.; Shaffer, J.E.

    1995-08-15

    An axial flow turbine`s nozzle/nozzle support structure is described having a cantilevered nozzle outer structure including an outer shroud and airfoil vanes extending radially inwardly therefrom, an inner shroud radially adjacent the inner end of the airfoil vanes and cooperatively disposed relative to the outer shroud to provide an annular fluid flow path, an inner and an outer support ring respectively arranged radially inside the inner shroud and axially adjacent a portion of the outer shroud, and pins extending through such portion and into the outer support ring. The inner support ring or inner shroud has a groove therein bounded by end walls for receiving and being axially abuttable with a locating projection from the adjacent airfoil vane, inner shroud, or inner support ring. The nozzle outer structure may comprise segments each of which has a single protrusion which is axially engageable with the outer support ring or, alternatively, a first and second protrusion which are arcuately and axially separated and which include axial openings therein whereby first and second protrusions on respective, arcuately adjacent nozzle segments have axial openings therein which are alignable with connector openings in the outer support ring and within each of such aligned openings a pin is receivable. The inner shroud may, likewise, comprise segments which, when assembled in operating configuration, have a 360 degree expanse. 6 figs.

  17. Turbine nozzle/nozzle support structure

    DOE Patents [OSTI]

    Boyd, G.L.; Shaffer, J.E.

    1997-01-07

    An axial flow turbine`s nozzle/nozzle support structure is described having a cantilevered nozzle outer structure including an outer shroud and airfoil vanes extending radially inwardly therefrom, an inner shroud radially adjacent the inner end of the airfoil vanes and cooperatively disposed relative to the outer shroud to provide an annular fluid flow path, an inner and an outer support ring respectively arranged radially inside the inner shroud and axially adjacent a portion of the outer shroud, and pins extending through such portion and into the outer support ring. The inner support ring or inner shroud has a groove therein bounded by end walls for receiving and being axially abuttable with a locating projection from the adjacent airfoil vane, inner shroud, or inner support ring. The nozzle outer structure may comprise segments each of which has a single protrusion which is axially engageable with the outer support ring or, alternatively, a first and second protrusion which are arcuately and axially separated and which include axial openings therein whereby first and second protrusions on respective, arcuately adjacent nozzle segments have axial openings therein which are alignable with connector openings in the outer support ring and within each of such aligned openings a pin is receivable. The inner shroud may, likewise, comprise segments which, when assembled in operating configuration, have a 360 degree expanse. 6 figs.

  18. NERSC Supports Top Breakthroughs of 2013

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Supports 2013's Top Breakthroughs NERSC Supports Top Breakthroughs of 2013 December 20, 2013 Linda Vu, +1 510 495 2402, lvu@lbl.gov Research supported by NERSC is being honored by end-of-year reviews in two leading magazines: Physics World and WIRED. The IceCube South Pole Neutrino Observatory was notably named to both lists, being honored as the most important discovery by Physics World. Three of Physics World's top 10 breakthroughs of 2013 went to discoveries that used NERSC resources. In

  19. Supporting Technical Documents | Department of Energy

    Energy Savers [EERE]

    Transfer Coordinator | Department of Energy Supporting STEM Education: A Q&A with the Energy Department's Tech Transfer Coordinator Supporting STEM Education: A Q&A with the Energy Department's Tech Transfer Coordinator February 25, 2013 - 1:52pm Q&A Send your questions and comments on creating opportunities for underrepresented groups in STEM. Ask Us Addthis Supporting STEM Education: A Q&A with the Energy Department’s Tech Transfer Coordinator Erin R. Pierce Erin R.

  20. User Support | Argonne Leadership Computing Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Services The ALCF User Experience Help Desk assists users with support requests related to their ALCF projects. The help desk is open from 9 a.m. until 5 p.m. (Central time) Monday through Friday, exclusive of holidays. Contact Us Email: support@alcf.anl.gov Telephone: 630-252-3111 866-508-9181 Help Desk: Building 240, 2-D-15/16 Argonne National Laboratory 9700 South Cass Avenue Argonne, IL 60439 Help Tickets To submit a help ticket for a technical issue, please email support@alcf.anl.gov and to

  1. Supporting a Hawaii Hydrogen Economy | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Supporting a Hawaii Hydrogen Economy Supporting a Hawaii Hydrogen Economy Download presentation slides from the DOE Fuel Cell Technologies Office webinar "Supporting a Hawaii...

  2. APS Engineering Support Division (AES) | Advanced Photon Source

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    APS Engineering Support Division (AES) The APS Engineering Support Division provides reliable operations and technical support to the Advanced Photon Source user community. AES...

  3. PIA - WEB Unclassified Business Operations General Support System...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Unclassified Business Operations General Support System PIA - WEB Unclassified Business Operations General Support System PIA - WEB Unclassified Business Operations General Support ...

  4. Headquarters Training Supports EM Field Sites

    Broader source: Energy.gov [DOE]

    GERMANTOWN, Md. – EM’s Office of Safety, Security and Quality Programs sponsored training for headquarters staff for nine days this month to help them better support the Cold War program’s cleanup sites around the complex.

  5. Floor Support | Stanford Synchrotron Radiation Lightsource

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Floor Support Service Responsible Person BLDG Extension (650) 926-XXXX Beam Status Duty Operator 120 926-2326 (BEAM) Duty Operator Cell Duty Operator 120 926-4040 User ProgramBeam...

  6. Minimum wear tube support hole design

    DOE Patents [OSTI]

    Glatthorn, Raymond H. (St. Petersburg, FL)

    1986-01-01

    A minimum-wear through-bore (16) is defined within a heat exchanger tube support plate (14) so as to have an hourglass configuration as determined by means of a constant radiused surface curvature (18) as defined by means of an external radius (R3), wherein the surface (18) extends between the upper surface (20) and lower surface (22) of the tube support plate (14). When a heat exchange tube (12) is disposed within the tube support plate (14) so as to pass through the through-bore (16), the heat exchange tube (12) is always in contact with a smoothly curved or radiused portion of the through-bore surface (16) whereby unacceptably excessive wear upon the heat exchange tube (12), as normally developed by means of sharp edges, lands, ridges, or the like conventionally part of the tube support plates, is eliminated or substantially reduced.

  7. Low thermal expansion seal ring support

    DOE Patents [OSTI]

    Dewis, David W.; Glezer, Boris

    2000-01-01

    Today, the trend is to increase the temperature of operation of gas turbine engines. To cool the components with compressor discharge air, robs air which could otherwise be used for combustion and creates a less efficient gas turbine engine. The present low thermal expansion sealing ring support system reduces the quantity of cooling air required while maintaining life and longevity of the components. Additionally, the low thermal expansion sealing ring reduces the clearance "C","C'" demanded between the interface between the sealing surface and the tip of the plurality of turbine blades. The sealing ring is supported by a plurality of support members in a manner in which the sealing ring and the plurality of support members independently expand and contract relative to each other and to other gas turbine engine components.

  8. Office of Worker Screening and Compensation Support

    Broader source: Energy.gov [DOE]

    The Office of Worker Screening and Compensation Programs implement the Former Worker Medical Surveillance Program and supports the Department of Labor (DOL) in the implementation of the Energy Employees Occupational Illness Compensation Program Act (EEOICPA).

  9. ARM - Field Campaign - AIRS Validation Sonde Support

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for the purpose of providing in situ validation data for development and testing of AIRS water vapor retrievals. This is a user support activity with funding provided by the user....

  10. Webinar: Supporting a Hawaii Hydrogen Economy

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Energy Department will present a live webinar titled "Supporting a Hawaii Hydrogen Economy" on Tuesday, July 29, from 3:00 p.m. to 4:00 p.m. Eastern Daylight Time (EDT). The webinar will...

  11. DOE Five Year Commercialization Support Plan

    Broader source: Energy.gov [DOE]

    On July 2, 2007, Marc Ledbetter, Pacific Northwest National Laboratory, provided an overview of DOE's Commercialization Support Plan. Key elements of the Plan include buyer guidance such as ENERGY...

  12. List of Contractors to Support Anthrax Remediation

    SciTech Connect (OSTI)

    Judd, Kathleen S.; Lesperance, Ann M.

    2010-05-14

    This document responds to a need identified by private sector businesses for information on contractors that may be qualified to support building remediation efforts following a wide-area anthrax release.

  13. ALARA Training for Technical Support Personnel

    Energy Savers [EERE]

    -HDBK-1110-2008 1 ALARA Training for Technical Support Personnel Overhead Transparencies and Handouts Coordinated and Conducted for Office of Health, Safety and Security U.S. Department of Energy Part 5 of 5 DOE -HDBK-1110-2008 2 ALARA TRAINING FOR TECHNICAL SUPPORT PERSONNEL Overhead Transparencies Intro-1 DOE -HDBK-1110-2008 3 Course Content Introduction to ALARA Types of radiation Selected topics in radiation protection ALARA principles Applications of ALARA to source term reduction and

  14. Employee Giving Campaign supports community partnerships

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Employee Giving Campaign supports community partnerships Community Connections: Your link to news and opportunities from Los Alamos National Laboratory Latest Issue:May 2016 all issues All Issues » submit Employee Giving Campaign supports community partnerships A personal message from Alan Bishop, Principal Associate Director for Science, Technology, and Engineering, Los Alamos National Laboratory December 1, 2014 Alan Bishop, Principal Associate Director for Science, Technology, and

  15. LANL subcontractor supports the region: SOC

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    LANL Subcontractor Supports The Region Community Connections: Your link to news and opportunities from Los Alamos National Laboratory Latest Issue:May 2016 all issues All Issues » submit LANL subcontractor supports the region: SOC The company's financial giving has benefited numerous organizations across the economic development, education, and giving sectors. January 1, 2013 dummy image Read our archives Contacts Editor Linda Anderman Email Community Programs Office Kurt Steinhaus Email The

  16. 2012 Supporting Organizations | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    DOE provided the overall financial and technical support for the peer review process and the 2012 Program Peer Review Meeting. It is the recipient of the results of the peer review and will employ those results to refine projects and programs to enhance progress toward Geothermal Technologies Office objectives. DOE contacts: Ava Coy CJNV CJNV provided overall financial and technical support for the peer review process. CJNV contacts: Sara Gonnin SRA International, Inc. SRA coordinated the

  17. Emergency Support Function #12; Energy Annex

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Emergency Support Function #12 - Energy Annex January 2008 ESF #12 - Energy Annex ESF #12-1 ESF Coordinator: Department of Energy Primary Agency: Department of Energy Support Agencies: Department of Agriculture Department of Commerce Department of Defense Department of Homeland Security Department of the Interior Department of Labor Department of State Department of Transportation Environmental Protection Agency Nuclear Regulatory Commission Tennessee Valley Authority INTRODUCTION Purpose

  18. Recommendation 173: Recommendation to Support Establishment and

    Office of Environmental Management (EM)

    Continuation of the Office of Communication | Department of Energy 3: Recommendation to Support Establishment and Continuation of the Office of Communication Recommendation 173: Recommendation to Support Establishment and Continuation of the Office of Communication The ORSSAB commends DOE on the establishment of the Office of Communication as presented by DOE at the April 23, 2008, EM SSAB meeting. PDF icon Recommendation 173 PDF icon DOE response to recommendation 173 More Documents &

  19. Multi-language Struct Support in Babel

    SciTech Connect (OSTI)

    Ebner, D; Prantl, A; Epperly, T W

    2011-03-22

    Babel is an open-source language interoperability framework tailored to the needs of high-performance scientific computing. As an integral element of the Common Component Architecture (CCA) it is used in a wide range of research projects. In this paper we describe how we extended Babel to support interoperable tuple data types (structs). Structs are a common idiom in scientific APIs; they are an efficient way to pass tuples of nonuniform data between functions, and are supported natively by most programming languages. Using our extended version of Babel, developers of scientific code can now pass structs as arguments between functions implemented in any of the supported languages. In C, C++ and Fortran 2003, structs can be passed without the overhead of data marshaling or copying, providing language interoperability at minimal cost. Other supported languages are Fortran 77, Fortran 90, Java and Python. We will show how we designed a struct implementation that is interoperable with all of the supported languages and present benchmark data compare the performance of all language bindings, highlighting the differences between languages that offer native struct support and an object-oriented interface with getter/setter methods.

  20. Intelligence support to arms control. Study project

    SciTech Connect (OSTI)

    Grisham, A.E.

    1990-04-09

    This paper argues that intelligence support is critical to the success of arms control. It identifies and describes the roles of intelligence in the arms control process, describes the existing intelligence organizational structure for arms control support, and identifies and analyzes issues. The roles include support to policy formulation, support to treaty negotiation, support to ratification, and finally, during verification, support for the implementation of the treaty through monitoring. The Director of Central Intelligence is responsible for monitoring, while the Arms Control and Disarmament Agency has responsibility for verification. Adjudication of conflicting interpretations occurs within the NSC committee structure. For several reasons, intelligence cannot be expected to do the actual verification of an arms control treaty. Most importantly, determination of an acceptable degree of confidence is always a political issue, although based on military judgement. Assigning intelligence responsibility for monitoring, rather than verification, helps to limit the politicization of intelligence. Issues identified during the research for this paper were analyzed within three subgroups: those inherent in the intelligence discipline; these must be managed successfully to limit adverse impact on intelligence products. Second, issues and challenges inherent in arms control bureaucratic relationships; these are best managed by keeping separate the actual monitoring analysis and verification this gives the West justification for caution, and reinforces the need for continued emphasis on verification.

  1. Modal Dynamics of Large Wind Turbines with Different Support Structures

    SciTech Connect (OSTI)

    Bir, G.; Jonkman, J.

    2008-07-01

    This paper presents modal dynamics of floating-platform-supported and monopile-supported offshore wind turbines.

  2. Yucca Mountain Climate Technical Support Representative

    SciTech Connect (OSTI)

    Sharpe, Saxon E

    2007-10-23

    The primary objective of Project Activity ORD-FY04-012, Yucca Mountain Climate Technical Support Representative, was to provide the Office of Civilian Radioactive Waste Management (OCRWM) with expertise on past, present, and future climate scenarios and to support the technical elements of the Yucca Mountain Project (YMP) climate program. The Climate Technical Support Representative was to explain, defend, and interpret the YMP climate program to the various audiences during Site Recommendation and License Application. This technical support representative was to support DOE management in the preparation and review of documents, and to participate in comment response for the Final Environmental Impact Statement, the Site Recommendation Hearings, the NRC Sufficiency Comments, and other forums as designated by DOE management. Because the activity was terminated 12 months early and experience a 27% reduction in budget, it was not possible to complete all components of the tasks as originally envisioned. Activities not completed include the qualification of climate datasets and the production of a qualified technical report. The following final report is an unqualified summary of the activities that were completed given the reduced time and funding.

  3. Inorganic dual-layer microporous supported membranes

    DOE Patents [OSTI]

    Brinker, C. Jeffrey; Tsai, Chung-Yi; Lu, Yungfeng

    2003-03-25

    The present invention provides for a dual-layer inorganic microporous membrane capable of molecular sieving, and methods for production of the membranes. The inorganic microporous supported membrane includes a porous substrate which supports a first inorganic porous membrane having an average pore size of less than about 25 .ANG. and a second inorganic porous membrane coating the first inorganic membrane having an average pore size of less than about 6 .ANG.. The dual-layered membrane is produced by contacting the porous substrate with a surfactant-template polymeric sol, resulting in a surfactant sol coated membrane support. The surfactant sol coated membrane support is dried, producing a surfactant-templated polymer-coated substrate which is calcined to produce an intermediate layer surfactant-templated membrane. The intermediate layer surfactant-templated membrane is then contacted with a second polymeric sol producing a polymeric sol coated substrate which is dried producing an inorganic polymeric coated substrate. The inorganic polymeric coated substrate is then calcined producing an inorganic dual-layered microporous supported membrane in accordance with the present invention.

  4. Technology development activities supporting tank waste remediation

    SciTech Connect (OSTI)

    Bonner, W.F.; Beeman, G.H.

    1994-06-01

    This document summarizes work being conducted under the U.S. Department of Energy`s Office of Technology Development (EM-50) in support of the Tank Waste Remediation System (TWRS) Program. The specific work activities are organized by the following categories: safety, characterization, retrieval, barriers, pretreatment, low-level waste, and high-level waste. In most cases, the activities presented here were identified as supporting tank remediation by EM-50 integrated program or integrated demonstration lead staff and the selections were further refined by contractor staff. Data sheets were prepared from DOE-HQ guidance to the field issued in September 1993. Activities were included if a significant portion of the work described provides technology potentially needed by TWRS; consequently, not all parts of each description necessarily support tank remediation.

  5. Supporting Dynamic Ad hoc Collaboration Capabilities

    SciTech Connect (OSTI)

    Agarwal, Deborah A.; Berket, Karlo

    2003-07-14

    Modern HENP experiments such as CMS and Atlas involve as many as 2000 collaborators around the world. Collaborations this large will be unable to meet often enough to support working closely together. Many of the tools currently available for collaboration focus on heavy-weight applications such as videoconferencing tools. While these are important, there is a more basic need for tools that support connecting physicists to work together on an ad hoc or continuous basis. Tools that support the day-to-day connectivity and underlying needs of a group of collaborators are important for providing light-weight, non-intrusive, and flexible ways to work collaboratively. Some example tools include messaging, file-sharing, and shared plot viewers. An important component of the environment is a scalable underlying communication framework. In this paper we will describe our current progress on building a dynamic and ad hoc collaboration environment and our vision for its evolution into a HENP collaboration environment.

  6. Supporting industries energy and environmental profile

    SciTech Connect (OSTI)

    None, None

    2005-09-21

    As part of its Industries of the Future strategy, the Industrial Technologies Program within the U.S. Department of Energy’s (DOE) Office of Energy Efficiency and Renewable Energy works with energy-intensive industries to improve efficiency, reduce waste, and increase productivity. These seven Industries of the Future (IOFs) – aluminum, chemicals, forest products, glass, metal casting, mining, and steel – rely on several other so-called “supporting industries” to supply materials and processes necessary to the products that the IOFs create. The supporting industries, in many cases, also provide great opportunities for realizing energy efficiency gains in IOF processes.

  7. NREL: Technology Deployment - Other Federal Agency Support

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Other Federal Agency Support Photo of a man and a woman standing behind a ground-mounted solar panel installation. Merry Edwards Winery in California is almost 100% solar powered and just one example of the more than 77,511 project applications reviewed by NREL prior to receiving funding through the U.S. Department of Treasury Recovery Act Section 1603 Treasury Grant Program. Courtesy of Ben Miller, Merry Edwards Winery Through work-for-others agreements, NREL supports other federal agencies in

  8. Rotating electric machine with fluid supported parts

    DOE Patents [OSTI]

    Smith, Jr., Joseph L. (Concord, MA); Kirtley, Jr., James L. (Brookline, MA)

    1981-01-01

    A rotating electric machine in which the armature winding thereof and other parts are supported by a liquid to withstand the mechanical stresses applied during transient overloads and the like. In particular, a narrow gap is provided between the armature winding and the stator which supports it and this gap is filled with an externally pressurized viscous liquid. The liquid is externally pressurized sufficiently to balance the static loads on the armature winding. Transient mechanical loads which deform the armature winding alter the gap dimensions and thereby additionally pressurize the viscous liquid to oppose the armature winding deformation and more nearly uniformly to distribute the resulting mechanical stresses.

  9. Separation of metals by supported liquid membrane

    DOE Patents [OSTI]

    Takigawa, Doreen Y. (Los Alamos, NM)

    1992-01-01

    A supported liquid membrane system for the separation of a preselected chemical species within a feedstream, preferably an aqueous feedstream, includes a feed compartment containing a feed solution having at least one preselected chemical species therein, a stripping compartment containing a stripping solution therein, and a microporous polybenzimidazole membrane situated between the compartments, the microporous polybenzimidazole membrane containing an extractant mixture selective for the preselected chemical species within the membrane pores is disclosed along with a method of separating preselected chemical species from a feedstream with such a system, and a supported liquid membrane for use in such a system.

  10. Trilinos I/O Support (Trios)

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Oldfield, Ron A.; Sjaardema, Gregory D.; Lofstead II, Gerald F.; Kordenbrock, Todd

    2012-01-01

    Trilinos I/O Support (Trios) is a new capability area in Trilinos that serves two important roles: (1) it provides and supports I/O libraries used by in-production scientific codes; (2) it provides a research vehicle for the evaluation and distribution of new techniques to improve I/O on advanced platforms. This paper provides a brief overview of the production-grade I/O libraries in Trios as well as some of the ongoing research efforts that contribute to the experimental libraries in Trios.

  11. NERSC seeks Computational Systems Group Lead

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    seeks Computational Systems Group Lead NERSC seeks Computational Systems Group Lead January 6, 2011 by Katie Antypas Note: This position is now closed. The Computational Systems Group provides production support and advanced development for the supercomputer systems at NERSC. Manage the Computational Systems Group (CSG) which provides production support and advanced development for the supercomputer systems at NERSC (National Energy Research Scientific Computing Center). These systems, which

  12. Supported metal catalysts: Preparation, characterization, and function

    SciTech Connect (OSTI)

    Jackson, S.D.; Leeming, P. [ICI Katalco, Cleveland (United Kingdom)] [ICI Katalco, Cleveland (United Kingdom); Webb, G. [Univ. of Glasgow (United Kingdom)] [Univ. of Glasgow (United Kingdom)

    1996-05-01

    The sorptive properties of supported platinum catalysts has been studied for the adsorption of carbonyl sulfide and hydrogen sulfide. It was observed that hydrogen sulfide adsorption disallowed carbon monoxide adsorption. Dissociation chemistry was probed using labelled compounds. 32 refs., 8 tabs.

  13. Hydrogen purifier module with membrane support

    DOE Patents [OSTI]

    A hydrogen purifier utilizing a hydrogen-permeable membrane to purify hydrogen from mixed gases containing hydrogen is disclosed. Improved mechanical support for the permeable membrane is described, enabling forward or reverse differential pressurization of the membrane, which further stabilizes the membrane from wrinkling upon hydrogen uptake.

    2012-07-24

    A hydrogen purifier utilizing a hydrogen-permeable membrane to purify hydrogen from mixed gases containing hydrogen is disclosed. Improved mechanical support for the permeable membrane is described, enabling forward or reverse differential pressurization of the membrane, which further stabilizes the membrane from wrinkling upon hydrogen uptake.

  14. ALARA Training for Technical Support Personnel

    Energy Savers [EERE]

    2 of 5) ALARA Training for Technical Support Personnel Instructor's Guide Coordinated and Conducted for Office of Health, Safety and Security U.S. Department of Energy DOE-HDBK-1110-2008 ii This page intentionally left blank. DOE-HDBK-1110-2008 iii Table of Contents Page DEPARTMENT OF ENERGY - COURSE PLAN.......................................... 1 COURSE MATERIAL..................... ............. ........................................ 1 Course Goal ........................ .............

  15. ALARA Training for Technical Support Personnel

    Energy Savers [EERE]

    3 of 5) ALARA Training for Technical Support Personnel Student's Guide Coordinated and Conducted for Office of Safety, Health and Security U.S. Department of Energy DOE-HDBK-1110-2008 ii This page intentionally left blank. DOE-HDBK-1110-2008 iii Table of Contents I. Module 101................................................................................ 1 1. INTRODUCTION TO ALARA............................................... 1 A.

  16. Attrition resistant gamma-alumina catalyst support

    DOE Patents [OSTI]

    Singleton, Alan H.; Oukaci, Rachid; Goodwin, James G.

    2006-03-14

    A .gamma.-alumina catalyst support having improved attrition resistance produced by a method comprising the steps of treating a particulate .gamma.-alumina material with an acidic aqueous solution comprising water and nitric acid and then, prior to adding any catalytic material thereto, calcining the treated .gamma.-alumina.

  17. NREL Research Support Facility (RSF) Documentary

    ScienceCinema (OSTI)

    None

    2013-05-29

    he ideas and innovations that define NREL are now shaping the next generation of commercial office buildings. DOE's Research Support Facility at NREL, will set a new benchmark for affordable, sustainable commercial design and construction. The unique form of the RSF is driven by energy-saving strategies, many researched and advanced at NREL.

  18. Nuclear reactor pressure vessel support system

    DOE Patents [OSTI]

    Sepelak, George R.

    1978-01-01

    A support system for nuclear reactor pressure vessels which can withstand all possible combinations of stresses caused by a postulated core disrupting accident during reactor operation. The nuclear reactor pressure vessel is provided with a flange around the upper periphery thereof, and the flange includes an annular vertical extension formed integral therewith. A support ring is positioned atop of the support ledge and the flange vertical extension, and is bolted to both members. The plug riser is secured to the flange vertical extension and to the top of a radially outwardly extension of the rotatable plug. This system eliminates one joint through which fluids contained in the vessel could escape by making the fluid flow path through the joint between the flange and the support ring follow the same path through which fluid could escape through the plug risers. In this manner, the sealing means to prohibit the escape of contained fluids through the plug risers can also prohibit the escape of contained fluid through the securing joint.

  19. Management of Support Services Contract Activity

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1992-08-31

    To provide the policy, procedures, and responsibilities for the management of support services contracts within the Department of Energy (DOE). Cancels DOE O 4200.3C dated 5-17-91. Canceled by DOE N 1321.140 dated 5-20-94.

  20. Management of Support Services Contract Activity

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1985-10-03

    To provide the policy, procedures, and responsibilities for the management of support service contracts within the Department of Energy (DOE). Cancels 4200.3A dated 4-5-83. Change 1 Errata Sheet dated 6-27-89. Canceled by DOE O 4200.3C dated 5-17-91.

  1. Obtain regulatory support services and technical expertise

    Office of Energy Efficiency and Renewable Energy (EERE)

    The purpose of this task order (TO) is to obtain regulatory support services and technical expertise required to comply with the March 2005 Compliance Order on Consent (Consent Order), the Individual Permit for Stormwater (IP), Resource Conservation and Recovery Act (RCRA) Hazardous Waste Facility Permit (RCRA Permit, and other applicable compliance areas for Fiscal Year 2016.

  2. SUPPORTED DENSE CERAMIC MEMBRANES FOR OXYGEN SEPARATION

    SciTech Connect (OSTI)

    Timothy L. Ward

    2002-07-01

    Mixed-conducting ceramics have the ability to conduct oxygen with perfect selectivity at elevated temperatures, making them extremely attractive as membrane materials for oxygen separation and membrane reactor applications. While the conductivity of these materials can be quite high at elevated temperatures (typically 800-1000 C), much higher oxygen fluxes, or, alternatively, equivalent fluxes at lower temperatures, could be provided by supported thin or thick film membrane layers. Based on that motivation, the objective of this project was to explore the use of ultrafine aerosol-derived powder of a mixed-conducting ceramic material for fabrication of supported thick-film dense membranes. The project focused on the mixed-conducting ceramic composition SrCo{sub 0.5}FeO{sub x} (SCFO) because of the desirable permeability and stability of that material, as reported in the literature. Appropriate conditions to produce the submicron SrCo{sub 0.5}FeO{sub x} powder using aerosol pyrolysis were determined. Porous supports of the same composition were produced by partial sintering of a commercially obtained powder that possessed significantly larger particle size than the aerosol-derived powder. The effects of sintering conditions (temperature, atmosphere) on the porosity and microstructure of the porous discs were studied, and a standard support fabrication procedure was adopted. Subsequently, a variety of paste and slurry formulations were explored utilizing the aerosol-derived SCFO powder. These formulations were applied to the porous SCFO support by a doctor blade or spin coating procedure. Sintering of the supported membrane layer was then conducted, and additional layers were deposited and sintered in some cases. The primary characterization methods were X-ray diffraction and scanning electron microscopy, and room-temperature nitrogen permeation was used to assess defect status of the membranes.We found that non-aqueous paste/slurry formulations incorporating dispersant, plasticizer and binder provided superior cracking resistance compared to simple water, alcohol, or polyethylene glycol (PEG) based formulations. With a formulation employing castor oil as dispersant, isopropyl alcohol/mineral spirits as solvent, polyvinyl butyral as binder, and dibutyl phthalate/PEG as plasticizer, sintered SCFO membrane layers approximately 5 {micro}m thick with no apparent cracks were prepared using spin coating with several coats and sintering cycles. A similar but more viscous formulation applied by doctor blade gave a {approx} 10 {micro}m thick membrane layer in one coat, but with some apparent cracking. We demonstrated that the membrane layer could be densified while retaining porosity in the chemically identical support. This was accomplished by pre-sintering the support in air (1050 C), which coarsened the grain size and provided a relatively stable plate-shaped granular microstructure, followed by membrane layer fabrication with the highly-sinterable aerosol powder. Final densification was conducted by sintering in nitrogen ({approx}1100 C), which provided accelerated sintering rates and led to the desired layered perovskite phase content. In spite of these successes, low-temperature pressure-driven permeation testing with N2 showed that even the best membranes were not sufficiently defect free for high-temperature oxygen permeation testing. The source of these defects were not readily apparent from scanning electron microscopy, though incomplete or nonuniform membrane layer coverage from edge to edge of the support was probably one important factor.

  3. U.S. Support Program tasks

    SciTech Connect (OSTI)

    Langner, D.G.

    1998-09-01

    In the fall of 1993, President Clinton announced before the United Nations General Assembly, that the US would voluntarily offer excess fissile material of weapons origin to International Atomic Energy Agency (IAEA) safeguards. There are presently five US Support Program tasks at work. Three are complete, and two are underway. Reports are available from two of the completed SP-1s; a draft is in preparation for the third. These tasks are: (1) plutonium scrap multiplicity counter at Hanford; (2) calorimeter authentication at Hanford; (3) large neutron multiplicity counter at Rocky Flats; (4) calorimeter authentication at Rocky Flats; and (5) safeguards approach support at the APSF, SRS. The status of the first four tasks above is described here. Information on the work at Savannah River is contained in a separate paper.

  4. Site Support Program Plan Infrastructure Program

    SciTech Connect (OSTI)

    1995-09-26

    The Fiscal Year 1996 Infrastructure Program Site Support Program Plan addresses the mission objectives, workscope, work breakdown structures (WBS), management approach, and resource requirements for the Infrastructure Program. Attached to the plan are appendices that provide more detailed information associated with scope definition. The Hanford Site`s infrastructure has served the Site for nearly 50 years during defense materials production. Now with the challenges of the new environmental cleanup mission, Hanford`s infrastructure must meet current and future mission needs in a constrained budget environment, while complying with more stringent environmental, safety, and health regulations. The infrastructure requires upgrading, streamlining, and enhancement in order to successfully support the site mission of cleaning up the Site, research and development, and economic transition.

  5. Integrated seat frame and back support

    DOE Patents [OSTI]

    Martin, Leo

    1999-01-01

    An integrated seating device comprises a seat frame having a front end and a rear end. The seat frame has a double wall defining an exterior wall and an interior wall. The rear end of the seat frame has a slot cut therethrough both the exterior wall and the interior wall. The front end of the seat frame has a slot cut through just the interior wall thereof. A back support comprising a generally L shape has a horizontal member, and a generally vertical member which is substantially perpendicular to the horizontal member. The horizontal member is sized to be threaded through the rear slot and is fitted into the front slot. Welded slat means secures the back support to the seat frame to result in an integrated seating device.

  6. Method of fabrication of supported liquid membranes

    DOE Patents [OSTI]

    Luebke, David R.; Hong, Lei; Myers, Christina R.

    2015-11-17

    Method for the fabrication of a supported liquid membrane having a dense layer in contact with a porous layer, and a membrane liquid layer within the interconnected pores of the porous layer. The dense layer is comprised of a solidified material having an average pore size less than or equal to about 0.1 nanometer, while the porous layer is comprised of a plurality of interconnected pores and has an average pore size greater than 10 nanometers. The supported liquid membrane is fabricated through the preparation of a casting solution of a membrane liquid and a volatile solvent. A pressure difference is established across the dense layer and porous layer, the casting solution is applied to the porous layer, and the low viscosity casting solution is drawn toward the dense layer. The volatile solvent is evaporated and the membrane liquid precipitates, generating a membrane liquid layer in close proximity to the dense layer.

  7. W87 JTA4 Forward Support Assembly

    SciTech Connect (OSTI)

    LePlant, Steve

    2011-06-08

    The purpose of this project was to establish the capability to manufacture the forward supports to the original specifications with one of the original cable grooves widened for JTA4 use. The resin system used in the original version of the part was Keramid 601, which was no longer available since it was shown to be a carcinogen. Much of the existing processing knowledge had been lost, and several changes had been made to the requirements since the last production run. The main processing steps include molding, machining, and assembly. All three steps were addressed in this project. Operations that required development are detailed in the text of the paper. This report summarizes the major steps taken to re-establish the manufacturing capability for the forward supports as well as issues seen during the development of these processes.

  8. Tube support grid and spacer therefor

    DOE Patents [OSTI]

    Ringsmuth, Richard J.; Kaufman, Jay S.

    1986-01-01

    A tube support grid and spacers therefor provide radially inward preloading of heat exchange tubes to minimize stress upon base welds due to differential thermal expansion. The grid comprises a concentric series of rings and spacers with opposing concave sides for conforming to the tubes and V-shaped ends to provide resilient flexibility. The flexibility aids in assembly and in transmitting seismic vibrations from the tubes to a shroud. The tube support grid may be assembled in place to achieve the desired inwardly radial preloading of the heat exchange tubes. Tab and slot assembly further minimizes stresses in the system. The radii of the grid rings may be preselected to effect the desired radially inward preloading.

  9. NREL: Sustainable NREL - Research Support Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Printable Version Research Support Facility Take a Closer Look RSF Brochure Design-Build Process Booklet Photos Videos Media Contacts Content on this page requires a newer version of Adobe Flash Player. Get Adobe Flash player Text Version An artist's rendering of an H-shaped building. The rendering includes a key at the bottom with letters A-K that correspond with letters on the building. Each letter, when selected, provides additional information about the building feature. Use the interactive

  10. NREL: Transportation Research - Transportation Deployment Support

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Transportation Deployment Support Photo of a car parked in front of a monument. A plug-in electric vehicle charges near the Thomas Jefferson Memorial in Washington, D.C. Photo from Julie Sutor, NREL NREL's transportation deployment team works with vehicle fleets, fuel providers, and other transportation stakeholders to help deploy alternative and renewable fuels, advanced vehicles, fuel economy improvements, and fleet-level efficiencies that reduce emissions and petroleum dependence. In

  11. Verification and Validation Supporting VERA Neutronics Code

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Verification and Validation Supporting VERA Neutronics Code As CASL produces its VERA software each physics capability must be tested, verified, and validated (V&V). The overarching objective of code verification is to establish that a computation- al model implemented in a code accurately represents the de- veloper's conceptual representation of the physics, while vali- dation refers to the process of determining the degree to which a computational model provides an accurate representation

  12. ALARA Training for Technical Support Personnel

    Energy Savers [EERE]

    4 of 5) ALARA Training for Technical Support Personnel Appendices Coordinated and Conducted for Office of Safety, Health and Security U.S. Department of Energy DOE-STD-1110-08 2 This page intentionally left blank. DOE-STD-1110-08 3 APPENDIX A - APPLICATION OF ALARA TO FACILITY SYSTEM DESIGN I. AIRBORNE RADIOACTIVITY AND HVAC SYSTEM CONSIDERATIONS Ventilation systems deserve separate ALARA considerations because of the possibility of increased doses due to internal uptake of airborne and surface

  13. Network support for system initiated checkpoints

    DOE Patents [OSTI]

    Chen, Dong; Heidelberger, Philip

    2013-01-29

    A system, method and computer program product for supporting system initiated checkpoints in parallel computing systems. The system and method generates selective control signals to perform checkpointing of system related data in presence of messaging activity associated with a user application running at the node. The checkpointing is initiated by the system such that checkpoint data of a plurality of network nodes may be obtained even in the presence of user applications running on highly parallel computers that include ongoing user messaging activity.

  14. LANL Nuclear Safety Support Services IDIQ Contract

    Broader source: Energy.gov [DOE]

    Due to recent changes directed by the Secretary of Energy, the EM-funded legacy cleanup scope of work under the current LANL Management and Operating (M&O) contract is undergoing a transition from NNSA oversight and management to DOE EM. As a result of the transition, EM will be conducting one or more procurements in support of the EM Los Alamos Legacy Cleanup Completion Project (LCCP).

  15. BL 11-2 User Support

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Support - header Beam Line Status Optics Configuration Model Compound Library Glitch Curves Instrumentation - header Detectors Data Collecting Software Experimental Design Beam Line Manual FAQ Photo Gallery Contact Us Welcome to beam line 11-2. It is the focus of the MEIS staff to make your visit here as productive as possible. We hope the information here will improve your experience at BL11-2 and aid you in collecting the highest quality data possible during your visit. Contact: Joe

  16. Ceramic turbine stator vane and shroud support

    DOE Patents [OSTI]

    Glenn, Robert G.

    1981-01-01

    A support system for supporting the stationary ceramic vanes and ceramic outer shrouds which define the motive fluid gas path in a gas turbine engine is shown. Each individual segment of the ceramic component whether a vane or shroud segment has an integral radially outwardly projecting stem portion. The stem is enclosed in a split collet member of a high-temperature alloy material having a cavity configured to interlock with the stem portion. The generally cylindrical external surface of the collet engages a mating internal cylindrical surface of an aperture through a supporting arcuate ring segment with mating camming surfaces on the two facing cylindrical surfaces such that radially outward movement of the collet relative to the ring causes the internal cavity of the collet to be reduced in diameter to tightly engage the ceramic stem disposed therein. A portion of the collet extends outwardly through the ring segment opposite the ceramic piece and is threaded for receiving a nut and a compression washer for retaining the collet in the ring segment under a continuous biasing force urging the collet radially outwardly.

  17. ARPA-E Technical Support Memo Appendices | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ARPA-E Technical Support Memo Appendices ARPA-E Technical Support Memo Appendices APPENDICES TECHNICAL SUPPORT MEMO FOR PROPOSED CATEGORICAL EXCLUSION B5.25 PDF icon CX rulemaking ...

  18. Instructions for the Supporting Statement - Revision | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    the Supporting Statement - Revision Instructions for the Supporting Statement - Revision PDF icon Instructions for the Supporting Statementrev-includes BH table.pdf More Documents & Publications Paperwork Reduction Act Forms Paperwork Reduction Act Submission (OMB 83-I)

  19. Supported Molten Metal Membranes for Hydrogen Separation

    SciTech Connect (OSTI)

    Datta, Ravindra; Ma, Yi Hua; Yen, Pei-Shan; Deveau, Nicholas; Fishtik, Ilie; Mardilovich, Ivan

    2013-09-30

    We describe here our results on the feasibility of a novel dense metal membrane for hydrogen separation: Supported Molten Metal Membrane, or SMMM.1 The goal in this work was to develop these new membranes based on supporting thin films of low-melting, non- precious group metals, e.g., tin (Sn), indium (In), gallium (Ga), or their alloys, to provide a flux and selectivity of hydrogen that rivals the conventional but substantially more expensive palladium (Pd) or Pd alloy membranes, which are susceptible to poisoning by the many species in the coal-derived syngas, and further possess inadequate stability and limited operating temperature range. The novelty of the technology presented numerous challenges during the course of this project, however, mainly in the selection of appropriate supports, and in the fabrication of a stable membrane. While the wetting instability of the SMMM remains an issue, we did develop an adequate understanding of the interaction between molten metal films with porous supports that we were able to find appropriate supports. Thus, our preliminary results indicate that the Ga/SiC SMMM at 550 ºC has a permeance that is an order of magnitude higher than that of Pd, and exceeds the 2015 DOE target. To make practical SMM membranes, however, further improving the stability of the molten metal membrane is the next goal. For this, it is important to better understand the change in molten metal surface tension and contact angle as a function of temperature and gas-phase composition. A thermodynamic theory was, thus, developed, that is not only able to explain this change in the liquid-gas surface tension, but also the change in the solid-liquid surface tension as well as the contact angle. This fundamental understanding has allowed us to determine design characteristics to maintain stability in the face of changing gas composition. These designs are being developed. For further progress, it is also important to understand the nature of solution and permeation process in these molten metal membranes. For this, a comprehensive microkinetic model was developed for hydrogen permeation in dense metal membranes, and tested against data for Pd membrane over a broad range of temperatures.3 It is planned to obtain theoretical and experimental estimates of the parameters to corroborate the model against mental results for SMMM.

  20. Method of forming supported doped palladium containing oxidation catalysts

    DOE Patents [OSTI]

    Mohajeri, Nahid

    2014-04-22

    A method of forming a supported oxidation catalyst includes providing a support comprising a metal oxide or a metal salt, and depositing first palladium compound particles and second precious metal group (PMG) metal particles on the support while in a liquid phase including at least one solvent to form mixed metal comprising particles on the support. The PMG metal is not palladium. The mixed metal particles on the support are separated from the liquid phase to provide the supported oxidation catalyst.

  1. Satellite Data Support for the ARM Climate Research Facility...

    Office of Scientific and Technical Information (OSTI)

    Satellite Data Support for the ARM Climate Research Facility, 8012009 - 7312015 Citation Details In-Document Search Title: Satellite Data Support for the ARM Climate Research ...

  2. How Industrial Energy Efficiency Can Support State Climate and...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Industrial Energy Efficiency Can Support State Climate and Energy Planning How Industrial Energy Efficiency Can Support State Climate and Energy Planning Provides states and their ...

  3. ARM - Field Campaign - ARM Support for the Plains Elevated Convection...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    govCampaignsARM Support for the Plains Elevated Convection at Night Experiment: Doppler Lidar Operations Related Campaigns ARM Support for the Plains Elevated Convection at Night...

  4. Support to Biofuels in Latin America and the Caribbean | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Support to Biofuels in Latin America and the Caribbean Support to Biofuels in Latin America and the Caribbean Breakout Session 3C-Fostering Technology Adoption III: International ...

  5. Buildings R&D Breakthroughs: Technologies and Products Supported...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    R&D Breakthroughs: Technologies and Products Supported by the Building Technologies Program Buildings R&D Breakthroughs: Technologies and Products Supported by the Building ...

  6. EERE Postdoctoral Research Awards Letter of Support from Research...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Letter of Support from Research Mentor EERE Postdoctoral Research Awards Letter of Support from Research Mentor PDF icon EEREletterofsupportmentor-2016 Zintellect.pdf More ...

  7. Air Force Civil Engineer Support Agency | Open Energy Information

    Open Energy Info (EERE)

    Civil Engineer Support Agency Jump to: navigation, search Name: Air Force Civil Engineer Support Agency Place: Florida Zip: 32403-5319 Sector: Renewable Energy Product:...

  8. Recommendation 205: Be proactive in support | Department of Energy

    Office of Environmental Management (EM)

    support The ORSSAB urges DOE to be proactive in supporting the removingtransporting of items having culturalhistoric value to outside organizations that are unable to fund the...

  9. Private Company Uses EERE-Supported Chemistry Model to Substantially...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Private Company Uses EERE-Supported Chemistry Model to Substantially Improve Combustion Engine Simulation Software Private Company Uses EERE-Supported Chemistry Model to ...

  10. NNSA Seeking Comments on Consolidated IT and Cyber Security Support...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    NNSA Seeking Comments on Consolidated IT and Cyber Security Support Services Draft NNSA Seeking Comments on Consolidated IT and Cyber Security Support Services Draft July 17, 2013 ...

  11. AVTA: Airport Ground Support Equipment Specifications and Test...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Airport Ground Support Equipment Specifications and Test Procedures AVTA: Airport Ground Support Equipment Specifications and Test Procedures PDF icon eGSE America Electric Baggage ...

  12. Technical Support Document for the Department of Energy's Notice...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technical Support Document for the Department of Energy's Notice of Final Rulemaking Technical Support Document for the Department of Energy's Notice of Final Rulemaking In this ...

  13. DOE Awards Small Business Task Order for Technical Support to...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Order for Technical Support to the Office of Environmental Management DOE Awards Small Business Task Order for Technical Support to the Office of Environmental Management June 27, ...

  14. Tracking and Using Data to Support Revenue Streams | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Tracking and Using Data to Support Revenue Streams Tracking and Using Data to Support Revenue Streams Better Buildings Neighborhood Program Data and Evaluation Peer Exchange Call: ...

  15. Evaluation of System Level Modeling and Simulation Tools in Support...

    Energy Savers [EERE]

    Tools in Support of Savannah River Site Liquid Waste Process Evaluation of System Level Modeling and Simulation Tools in Support of Savannah River Site Liquid Waste ...

  16. Los Alamos names new head of stockpile manufacturing and support

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New head of stockpile manufacturing and support Los Alamos names new head of stockpile manufacturing and support Carl Beard is the new associate director for stockpile...

  17. CBEI: Stakeholder Engagement Support for the Better Buildings...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Stakeholder Engagement Support for the Better Buildings Energy Data Accelerator - 2015 Peer Review CBEI: Stakeholder Engagement Support for the Better Buildings Energy Data ...

  18. Dominican Republic-Regional Programme for LAC: Support for the...

    Open Energy Info (EERE)

    Programme for LAC: Support for the Preparation of the National Climate Change Policy (Redirected from UNDP-Dominican Republic Regional Programme for LAC - Support for the...

  19. Energy Department and USDA Partner to Support Energy Efficiency...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    USDA Partner to Support Energy Efficiency in Rural Communities Energy Department and USDA Partner to Support Energy Efficiency in Rural Communities February 28, 2013 - 9:45am...

  20. Department of Energy Technical Support Document National Environmental...

    Energy Savers [EERE]

    Energy Technical Support Document National Environmental Policy Act Implementing Procedures Supplement to Notice of Proposed Rulemaking Proposed Changes and Supplemental Supporting...

  1. Laboratory Study Supporting the Interpretation of Solar Dynamics...

    Office of Scientific and Technical Information (OSTI)

    Laboratory Study Supporting the Interpretation of Solar Dynamics Observatory data Citation Details In-Document Search Title: Laboratory Study Supporting the Interpretation of Solar ...

  2. Laboratory support for in situ gasification reaction kinetics...

    Office of Scientific and Technical Information (OSTI)

    Laboratory support for in situ gasification reaction kinetics. Quarterly report, October--December 1976 Citation Details In-Document Search Title: Laboratory support for in situ ...

  3. China-ClimateWorks Low Carbon Growth Planning Support | Open...

    Open Energy Info (EERE)

    ClimateWorks Low Carbon Growth Planning Support Jump to: navigation, search Name China-Low Carbon Growth Planning Support AgencyCompany Organization ClimateWorks, Project...

  4. Leveraging Tribal Renewable Resources to Support Military Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Leveraging Tribal Renewable Resources to Support Military Energy Goals Leveraging Tribal Renewable Resources to Support Military Energy Goals May 30-31, 2013 Image of a speaker at ...

  5. Ghana-Support for Future National Climate Change Policy Framework...

    Open Energy Info (EERE)

    Support for Future National Climate Change Policy Framework (Redirected from CDKN-Ghana-Support for Future National Climate Change Policy Framework) Jump to: navigation, search...

  6. Argentina-Support for the Preparation of National Climate Change...

    Open Energy Info (EERE)

    Argentina-Support for the Preparation of National Climate Change Strategy Jump to: navigation, search Name UNDP-Argentina Regional Programme for LAC - Support for the preparation...

  7. Nepal-Climate Change Support Programme | Open Energy Information

    Open Energy Info (EERE)

    Nepal-Climate Change Support Programme Jump to: navigation, search Name Nepal Climate Change Support Programme AgencyCompany Organization United Kingdom Department for...

  8. Dominican Republic-Support for the Preparation of National Climate...

    Open Energy Info (EERE)

    Support for the Preparation of National Climate Change Strategy Jump to: navigation, search Name Dominican Republic-Argentina-Support for the Preparation of National Climate Change...

  9. Gambia-Support the Development of a National Climate Compatible...

    Open Energy Info (EERE)

    Gambia-Support the Development of a National Climate Compatible Development Strategy Jump to: navigation, search Name CDKN-Gambia-Support the Development of a National Climate...

  10. Laboratory Study Supporting the Interpretation of Solar Dynamics...

    Office of Scientific and Technical Information (OSTI)

    Laboratory Study Supporting the Interpretation of Solar Dynamics Observatory data Citation Details In-Document Search Title: Laboratory Study Supporting the Interpretation of Solar...

  11. PIA - WEB Unclassified Business Operations General Support System...

    Energy Savers [EERE]

    WEB Unclassified Business Operations General Support System PIA - WEB Unclassified Business Operations General Support System PIA - WEB Unclassified Business Operations General...

  12. Low-Temperature Hydrocarbon/CO Oxidation Catalysis in Support...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Low-Temperature HydrocarbonCO Oxidation Catalysis in Support of HCCI Emission Control Low-Temperature HydrocarbonCO Oxidation Catalysis in Support ...

  13. How Building Energy Codes Can Support State Climate and Energy...

    Office of Environmental Management (EM)

    Building Energy Codes Can Support State Climate and Energy Planning How Building Energy Codes Can Support State Climate and Energy Planning Provides states and their stakeholders ...

  14. National Renewable Energy Laboratory Seeks Intern to Support...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    National Renewable Energy Laboratory Seeks Intern to Support Tribal Work National Renewable Energy Laboratory Seeks Intern to Support Tribal Work January 5, 2016 - 5:23pm Addthis ...

  15. ClimateWorks-Egypt-Low Carbon Growth Planning Support | Open...

    Open Energy Info (EERE)

    ClimateWorks-Egypt-Low Carbon Growth Planning Support Redirect page Jump to: navigation, search REDIRECT ClimateWorks Low Carbon Growth Planning Support Retrieved from "http:...

  16. Supporting Statement: OE Recovery Act Financial Assistance Grants...

    Office of Environmental Management (EM)

    Supporting Statement: OE Recovery Act Financial Assistance Grants OMB Control Number 1910-5149 Supporting Statement: OE Recovery Act Financial Assistance Grants OMB Control Number ...

  17. Department of Energy Launches Website Supporting Energy-Saving...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Website Supporting Energy-Saving Reconstruction in the Gulf Coast Department of Energy Launches Website Supporting Energy-Saving Reconstruction in the Gulf Coast November 22, 2005 ...

  18. President Obama Announces LPO Support for Distributed Energy...

    Energy Savers [EERE]

    President Obama Announces LPO Support for Distributed Energy Projects, New Guidance Includes Fuel Cells President Obama Announces LPO Support for Distributed Energy Projects, New ...

  19. SEP Success Story: Energy Department Supporting Nevada's Effort...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Supporting Nevada's Effort to Increase Electric Vehicle Infrastructure Along Major U.S. Highway SEP Success Story: Energy Department Supporting Nevada's Effort to Increase Electric ...

  20. SEP Success Story: "Green Launching Pad" Supports Clean Energy...

    Energy Savers [EERE]

    "Green Launching Pad" Supports Clean Energy Small Businesses SEP Success Story: "Green Launching Pad" Supports Clean Energy Small Businesses May 24, 2012 - 5:10pm Addthis Green ...

  1. DOE Offers Support for Innovative Manufacturing Plant That Will...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Offers Support for Innovative Manufacturing Plant That Will Produce High Quality Solar Silicon at Low Cost DOE Offers Support for Innovative Manufacturing Plant That Will Produce...

  2. Periodic Trends in Highly Dispersed Groups IV and V Supported...

    Office of Scientific and Technical Information (OSTI)

    Periodic Trends in Highly Dispersed Groups IV and V Supported Metal Oxide Catalysts for ... Title: Periodic Trends in Highly Dispersed Groups IV and V Supported Metal Oxide Catalysts ...

  3. Secretary Chu Announces $45 Million to Support Next Generation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Secretary Chu Announces 45 Million to Support Next Generation of Wind Turbine Designs Secretary Chu Announces 45 Million to Support Next Generation of Wind Turbine Designs...

  4. Net Zero Waste - Tools and Technical Support ...and other observations...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Net Zero Waste - Tools and Technical Support ...and other observations Net Zero Waste - Tools and Technical Support ...and other observations Presentation at Waste-to-Energy using...

  5. Kenya-ClimateWorks Low Carbon Growth Planning Support | Open...

    Open Energy Info (EERE)

    ClimateWorks Low Carbon Growth Planning Support Jump to: navigation, search Name Kenya-Low Carbon Growth Planning Support AgencyCompany Organization ClimateWorks, Project...

  6. India-ClimateWorks Low Carbon Growth Planning Support | Open...

    Open Energy Info (EERE)

    ClimateWorks Low Carbon Growth Planning Support Jump to: navigation, search Name India-Low Carbon Growth Planning Support AgencyCompany Organization ClimateWorks, Project...

  7. Brazil-ClimateWorks Low Carbon Growth Planning Support | Open...

    Open Energy Info (EERE)

    ClimateWorks Low Carbon Growth Planning Support Jump to: navigation, search Name Brazil-Low Carbon Growth Planning Support AgencyCompany Organization ClimateWorks, Project...

  8. Guyana-ClimateWorks Low Carbon Growth Planning Support | Open...

    Open Energy Info (EERE)

    ClimateWorks Low Carbon Growth Planning Support Jump to: navigation, search Name Guyana-Low Carbon Growth Planning Support AgencyCompany Organization ClimateWorks, Project...

  9. Mexico-ClimateWorks Low Carbon Growth Planning Support | Open...

    Open Energy Info (EERE)

    ClimateWorks Low Carbon Growth Planning Support Jump to: navigation, search Name Mexico-Low Carbon Growth Planning Support AgencyCompany Organization ClimateWorks, Project...

  10. Malaysia-ClimateWorks Low Carbon Growth Planning Support | Open...

    Open Energy Info (EERE)

    Malaysia-ClimateWorks Low Carbon Growth Planning Support Jump to: navigation, search Name Malaysia-Low Carbon Growth Planning Support AgencyCompany Organization ClimateWorks,...

  11. Indonesia-ClimateWorks Low Carbon Growth Planning Support | Open...

    Open Energy Info (EERE)

    ClimateWorks Low Carbon Growth Planning Support Jump to: navigation, search Name Indonesia-Low Carbon Growth Planning Support AgencyCompany Organization ClimateWorks, Project...

  12. Egypt-ClimateWorks Low Carbon Growth Planning Support | Open...

    Open Energy Info (EERE)

    ClimateWorks Low Carbon Growth Planning Support Jump to: navigation, search Name Egypt-Low Carbon Growth Planning Support AgencyCompany Organization ClimateWorks, Project...

  13. Ethiopia-ClimateWorks Low Carbon Growth Planning Support | Open...

    Open Energy Info (EERE)

    Ethiopia-ClimateWorks Low Carbon Growth Planning Support Jump to: navigation, search Name Ethiopia-Low Carbon Growth Planning Support AgencyCompany Organization ClimateWorks,...

  14. NNSA Seeking Comments on Consolidated IT and Cyber Security Support...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    NNSA Seeking Comments on Consolidated IT and Cyber Security Support Services Draft NNSA Seeking Comments on Consolidated IT and Cyber Security Support Services Draft July 17, 2013...

  15. Secretary Chu Announces $93 Million from Recovery Act to Support...

    Energy Savers [EERE]

    Secretary Chu Announces 93 Million from Recovery Act to Support Wind Energy Projects Secretary Chu Announces 93 Million from Recovery Act to Support Wind Energy Projects April ...

  16. NREL: Technology Deployment - Disaster Recovery Support at FEMA...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Disaster Recovery Support at FEMA Incorporates Sustainability in Rebuilding Efforts News ... has provided support in integrating sustainability into federal, state and local ...

  17. Energy Department Offers Conditional Commitment to Support Nevada...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Offers Conditional Commitment to Support Nevada Geothermal Development with Recovery Act Funds Energy Department Offers Conditional Commitment to Support Nevada Geothermal ...

  18. Heating and Cooling System Support Equipment Basics | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Cooling System Support Equipment Basics Heating and Cooling System Support Equipment ... Thermostats and ducts provide opportunities for saving energy. Dehumidifying heat pipes ...

  19. Philippines-Support for the National Climate Commission | Open...

    Open Energy Info (EERE)

    Philippines-Support for the National Climate Commission Jump to: navigation, search Name GIZ-Philippines-Support for the National Climate Commission AgencyCompany Organization...

  20. Philippines-Support for the National Climate Commission | Open...

    Open Energy Info (EERE)

    Philippines-Support for the National Climate Commission (Redirected from GIZ-Philippines-Support for the National Climate Commission) Jump to: navigation, search Name...

  1. Integration Technology for PHEV-Grid-Connectivity, with Support...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technology for PHEV-Grid-Connectivity, with Support for SAE Electrical Standards Integration Technology for PHEV-Grid-Connectivity, with Support for SAE Electrical Standards 2010...

  2. Electrode With Porous Three-Dimensional Support

    DOE Patents [OSTI]

    Bernard, Patrick; Dauchier, Jean-Michel; Simonneau, Olivier

    1999-07-27

    Electrode including a paste containing particles of electrochemically active material and a conductive support consisting of a three-dimensional porous material comprising strands delimiting contiguous pores communicating via passages, characterized in that the average width L in .mu.m of said passages is related to the average diameter .O slashed. in .mu.m of said particles by the following equation, in which W and Y are dimensionless coefficients: wherein W=0.16 Y=1.69 X=202.4 .mu.m and Z=80 .mu.m

  3. Hydrogen recombiner catalyst test supporting data

    SciTech Connect (OSTI)

    Britton, M.D.

    1995-01-19

    This is a data package supporting the Hydrogen Recombiner Catalyst Performance and Carbon Monoxide Sorption Capacity Test Report, WHC-SD-WM-TRP-211, Rev 0. This report contains 10 appendices which consist of the following: Mass spectrometer analysis reports: HRC samples 93-001 through 93-157; Gas spectrometry analysis reports: HRC samples 93-141 through 93-658; Mass spectrometer procedure PNL-MA-299 ALO-284; Alternate analytical method for ammonia and water vapor; Sample log sheets; Job Safety analysis; Certificate of mixture analysis for feed gases; Flow controller calibration check; Westinghouse Standards Laboratory report on Bois flow calibrator; and Sorption capacity test data, tables, and graphs.

  4. A Multiple Objective Decision Support Tool (MODS)

    Energy Science and Technology Software Center (OSTI)

    2003-12-14

    The Multiple Objective Decision Support (MODS) tool is an automated tool used to assist decision makers and policy analysts with multiple-objective decision problems. The classes of problems that this decision support tool addresses have both multiple objectives and multiple stakeholders. Decision problems, which have multiple objectives that in general cannot be maximized simultaneously, and multiple stakeholders, who have different perspectives about the relative importance of the objectives, require analytic approaches and tools that can providemore » flexible support to decision makers. This tool provides capabilities for the management, analysis, and graphical display for these types of decision problems drawn from diverse problem domains. The MODS tool is a unique integration of analysis algorithms, an information database, and a graphical user interface. This collection of algorithms, the combination of an information database with the analysis into a single tool, and the graphical user interface provides a technically advanced tool to decision makers and policy analysts. There are two main issues when addressing problems of this type: what set of attributes should be used to characterize the tokens in the domain of interest, and how should the values of these attributes and their weights be determined and combined to provide a relative ordering to the tokens. This tool addresses both of these issues. This decision support tool provides a flexible way to derive and use a chosen set of attributes. For example, the tool could be used to first perform a paired comparison of a large set of attributes and from this evaluation select those attributes that have the highest weights. The flexibility of the tool allows experimentation with various attribute sets and this capability, along with domain expertise, addresses the first issue. To address the second issue, several algorithms have been implemented. For example, two algorithms that have been implemented are the geometric mean and the product of the weighted attributes. These, and other algorithms, are described in detail in the following sections. The algorithms can be selected easily and various evaluations can be compared. The tool also provides flexible methods for assigning weights to the attributes. A range of values can be assigned to an attribute when there is uncertainty as to which specific value should be assigned.« less

  5. Haselden/RNL - Research Support Facility Documentary

    ScienceCinema (OSTI)

    None

    2013-05-29

    The US Department of Energy's (DOE) Research Support Facility (RSF) on the campus of the National Renewable Energy Laboratory is positioned to be one of the most energy efficient buildings in the world. It will demonstrate NREL's role in moving advanced technologies and transferring knowledge into commercial applications. Because 19 percent of the country's energy is used by commercial buildings, DOE plans to make this facility a showcase for energy efficiency. DOE hopes the design of the RSF will be replicated by the building industry and help reduce the nation's energy consumption by changing the way commercial buildings are designed and built.

  6. CONCRETE SUPPORT DESIGN FOR MISCELLANEOUS ESF UTILITIES

    SciTech Connect (OSTI)

    T.A. Misiak

    1999-06-21

    The purpose and objective of this analysis is to design concrete supports for the miscellaneous utility equipment used at the Exploratory Studies Facility (ESF). Two utility systems are analyzed: (1) the surface collection tanks of the Waste Water System, and (2) the chemical tracer mixing and storage tanks of the Non-Potable Water System. This analysis satisfies design recommended in the Title III Evaluation Reports for the Subsurface Fire Water System and Subsurface Portion of the Non-Potable Water System (CRWMS M&O 1998a) and Waste Water Systems (CRWMS M&O 1998b).

  7. Separations by supported liquid membrane cascades

    DOE Patents [OSTI]

    Danesi, Pier R.

    1986-01-01

    The invention describes a new separation technique which leads to multi-stage operations by the use of a series (a cascade) of alternated carrier-containing supported-liquid membranes. The membranes contain alternatively a liquid cation exchanger extractant and a liquid anion exchanger extractant (or a neutral extractant) as carrier. The membranes are spaced between alternated aqueous electrolytic solutions of different composition which alternatively provide positively charged extractable species and negatively charged (or zero charged) extractable species, of the chemical species to be separated. The alternated aqueous electrolytic solutions in addition to providing the driving force to the process, simultaneously function as a stripping solution from one type of membrane and as an extraction-promoting solution for the other type of membrane. The aqueous electrolytic solutions and the supported liquid membranes are arranged in such a way to provide a continuous process which leads to the continuous enrichment of the species which show the highest permeability coefficients. By virtue of the very high number of stages which can be arranged, even chemical species having very similar chemical behavior (and consequently very similar permeability coefficients) can be completely separated. The invention also provide a way to concentrate the separated species.

  8. Supported palladium materials for isotope separation

    SciTech Connect (OSTI)

    Rutherford, W.M.; Ellis, R.E.; Abell, G.C.

    1988-01-21

    Several palladium packing materials were investigated for their suitability for use in the separation of hydrogen isotopes by displacement chromatography. The materials included palladium on Chromosorb and several formulations of palladium on commercially available alpha-alumina-based catalyst supports. All materials showed some degradation upon being subjected to repeated hydriding-dehydriding cycles; however, the degradation did not lead to unacceptably low permeability to gas flow. Dynamic performance of the packings was evaluated by displacement of deuterium with protium at several temperatures and flow rates. Isotopic exchange was generally rapid. However, high surface area packings (greater than 4 m/sup 2//g) yielded transition zones that were initially sharp, but had long ''tails'' at deuterium concentrations below 5%. Best results were obtained with a packing containing 48.2% palladium on Norton catalyst support No. SA5*21 (surface area = 0.33 m/sup 2//g). Improved performance was observed as the displacement temperature was increased to 80/sup 0/C from 22/sup 0/C. The slight decrease in equilibrium separation was more than offset by improved kinetics at the higher temperature. 19 figs., 6 tabs.

  9. Student Support for EIPBN 2012 Conference

    SciTech Connect (OSTI)

    Reginald C. Farrow

    2013-01-29

    The 56th International Conference on Electron, Ion and Photon Beam Technology and Nanofabrication (EIPBN), 2012, was held at the Hilton Waikoloa Resort in Waikoloa, Hawaii, May 29 - June 2, 2012. The EIPBN Conference is recognized as the foremost international meeting dedicated to lithographic science and technology and its application to micro and nanofabrication techniques. The conference brought together 483 engineers and scientists from industries and universities from all over the world to discuss recent progress and future trends. Among the emerging technologies that are within the scope of EIPBN is Nanofabrication for Energy Sources along with nanofabrication for the realization of low power integrated circuits. Every year, EIPBN provides financial support for students to attend the conference. The students gave oral and poster presentations of their research and many published peer reviewed articles in a special conference issue of the Journal of Vacuum Science and Technology B. The Department of Energy Office of Basic Energy Sciences partially supported 41 students from US universities with a $5,000.

  10. PIA - WEB Unclassified Business Operations General Support System |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Unclassified Business Operations General Support System PIA - WEB Unclassified Business Operations General Support System PIA - WEB Unclassified Business Operations General Support System PDF icon PIA - WEB Unclassified Business Operations General Support System More Documents & Publications PIA - WEB Physical Security Major Application PIA - INL PeopleSoft - Human Resource System PIA - INL SECURITY INFORMATION MANAGEMENT SYSTEM BUSINESS ENCLAVE

  11. Department of Energy Technical Support Document National Environmental

    Energy Savers [EERE]

    Policy Act Implementing Procedures Supplement to Notice of Proposed Rulemaking Proposed Changes and Supplemental Supporting Basis | Department of Energy Energy Technical Support Document National Environmental Policy Act Implementing Procedures Supplement to Notice of Proposed Rulemaking Proposed Changes and Supplemental Supporting Basis Department of Energy Technical Support Document National Environmental Policy Act Implementing Procedures Supplement to Notice of Proposed Rulemaking

  12. Automated Office Systems Support (AOSS) Quality Assurance Model |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Automated Office Systems Support (AOSS) Quality Assurance Model Automated Office Systems Support (AOSS) Quality Assurance Model A quality assurance model, including checklists, for activity relative to network and desktop computer support. PDF icon Automated Office Systems Support (AOSS) Quality Assurance Model More Documents & Publications Audit Report: CR-B-97-04 CITSS Project Plan Quality Assurance Checklist

  13. Public Law 102-392 for Printing

    Energy Savers [EERE]

    Promoting NEPA Transparency and Public Engagement Promoting NEPA Transparency and Public Engagement June 3, 2011 - 1:14pm Addthis "NEPA is, at its core, a transparency statute," said Katie Scharf, Council on Environmental Quality (CEQ) Deputy General Counsel, in opening a panel discussion on using information technology to support open government initiatives, engage the public, and add value to NEPA analysis. At the March 9, 2011, event - hosted by CEQ for Federal NEPA and legal staff

  14. Promoting NEPA Transparency and Public Engagement | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Promoting NEPA Transparency and Public Engagement Promoting NEPA Transparency and Public Engagement June 3, 2011 - 1:14pm Addthis "NEPA is, at its core, a transparency statute," said Katie Scharf, Council on Environmental Quality (CEQ) Deputy General Counsel, in opening a panel discussion on using information technology to support open government initiatives, engage the public, and add value to NEPA analysis. At the March 9, 2011, event - hosted by CEQ for Federal NEPA and legal staff

  15. Alternative Fuels Data Center: Diversity of Fuels Supports Sustainability

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    in Fort Collins Diversity of Fuels Supports Sustainability in Fort Collins to someone by E-mail Share Alternative Fuels Data Center: Diversity of Fuels Supports Sustainability in Fort Collins on Facebook Tweet about Alternative Fuels Data Center: Diversity of Fuels Supports Sustainability in Fort Collins on Twitter Bookmark Alternative Fuels Data Center: Diversity of Fuels Supports Sustainability in Fort Collins on Google Bookmark Alternative Fuels Data Center: Diversity of Fuels Supports

  16. A COMPUTERIZED OPERATOR SUPPORT SYSTEM PROTOTYPE

    SciTech Connect (OSTI)

    Thomas A. Ulrich; Roger Lew; Ronald L. Boring; Ken Thomas

    2015-03-01

    A computerized operator support system (COSS) is proposed for use in nuclear power plants to assist control room operators in addressing time-critical plant upsets. A COSS is a collection of technologies to assist operators in monitoring overall plant performance and making timely, informed decisions on appropriate control actions for the projected plant condition. A prototype COSS was developed in order to demonstrate the concept and provide a test bed for further research. The prototype is based on four underlying elements consisting of a digital alarm system, computer-based procedures, piping and instrumentation diagram system representations, and a recommender module for mitigation actions. The initial version of the prototype is now operational at the Idaho National Laboratory using the Human System Simulation Laboratory.

  17. Dielectric supported radio-frequency cavities

    DOE Patents [OSTI]

    Yu, David U. L.; Lee, Terry G.

    2000-01-01

    A device which improves the electrical and thermomechanical performance of an RF cavity, for example, in a disk-loaded accelerating structure. A washer made of polycrystalline diamond is brazed in the middle to a copper disk washer and at the outer edge to the plane wave transformer tank wall, thus dissipating heat from the copper disk to the outer tank wall while at the same time providing strong mechanical support to the metal disk. The washer structure eliminates the longitudinal connecting rods and cooling channels used in the currently available cavities, and as a result minimizes problems such as shunt impedance degradation and field distortion in the plane wave transformer, and mechanical deflection and uneven cooling of the disk assembly.

  18. Partial Support for the Federal Committee for Meteorological Services and Supporting Research

    SciTech Connect (OSTI)

    Williamson, Samuel P

    2012-04-30

    DOE E-link Report Number DOE/ER62778 1999-2012 Please see attached Final Technical Report (size too large to post here). Annual Products Provided to DOE: Federal Plan for Meteorological Services and Supporting Research; National Hurricane Operations Plan; Interdepartmental Hurricane Conference Summary Report. All reports and publications can be found on the OFCM website, www.ofcm.noaa.gov.

  19. Support of US CLIVAR Project Office 2012

    SciTech Connect (OSTI)

    Cummings, Donna

    2013-11-21

    SUBJECT: CLOSEOUT OF AWARD NO DE-SC0008494 FINAL REPORT: SUPPORT OF US CLIVAR PROJECT OFFICE 2012 UNIVERSITY CORPORATION FOR ATMOSPHERIC RESEARCH Director of JOSS, supervised the U.S. CLIVAR Project Office Director and helped direct the officer to enhance the goals and objectives of the U.S. CLIVAR Project and budget. Financial Manager of JOSS, worked to complete proposals and monitor compliance with award requirements and funding limitations and ensure the U.S. CLIVAR Project Office complied with UCAR policies and procedures. Project Coordinator administered the funding for the U.S. CLIVAR Project Office and was responsible for coordinating special projects that required additional support from JOSS technical staff. These projects included activities such as website updates, technology upgrades, production of printed reports, and development of graphic elements like logos. Web Developer worked both on web development and graphic work and the work consisted of the following: Maintaining the site ? installing updates to Drupal CMS (Content Management System). Creating new templates for webpages and styling them with CSS and JavaScript/jQuery code. Fixing the styling on webpages that the content contributor/manager (Jenn Mays) created and has had trouble with. Creating new web forms for abstract uploading, subscriptions, and meeting registrations. Created 4 webpages for the ?ASP: Key Uncertainties in the Global Carbon-Cycle? meeting. Developed a document review form, instruction webpages, login redirect, dynamic table with form submissions for the US CLIVAR SSC Science Plan Document Review. This was open to the public from June 12, 2013 until July 10, 2013. During this time the user accounts had to be checked (daily) that were created by the public, to delete any spam ones. Graphics work: preparing images for general use on webpages, webpage banners, and for meeting name badges, creating a US CLIVAR letterhead, redesigning the US AMOC logo. System Administrator spent time working on the migration of the US CLIVAR site from the USGCRP office to UCAR here Boulder. This was done to increase the general speed of the site & to allow the web developer to work in it more efficiently. Main tasks were to Archive the old Site, create new development site for web developer, and move web address to new website when web developer was finished with development. There are no patients or equipment related to this proposals

  20. TAP 3, Training Program Support Manual

    SciTech Connect (OSTI)

    Not Available

    1991-07-01

    Training programs at DOE facilities should provide well-trained, qualified personnel to safely and efficiently operate the facilities in accordance with DOE requirements. A need has been identified for guidance regarding analysis, design, development, implementation, and evaluation of consistent and reliable performance-based training programs. Accreditation of training programs at Category A reactors and high-hazard and selected moderate-hazard nonreactor nuclear facilities will assure consistent, appropriate, and cost-effective training of personnel responsible for the operation, maintenance, and technical support of these facilities. Training programs that are designed and based on systematically determined job requirements, instead of subjective estimation of trainee needs, yield training activities that are consistent and develop or improve knowledge, skills, and abilities that can be directly related to the work setting. Because the training is job-related, the content of these programs more efficiently and effectively meets the needs of the employee. Besides a better trained work force, a greater level of operational reactor safety can be realized. This manual is intended to provide an overview of the accreditation process and a brief description of the elements necessary to construct and maintain training programs that are based on the requirements of the job. Two companion manuals provide additional information to assist contractors in their efforts to accredit training programs.

  1. Ceramic wash-coat for catalyst support

    DOE Patents [OSTI]

    Kulkarni, Anand A.; Subramanian, Ramesh; Sabol, Stephen M.

    2012-08-14

    Abstract A wash-coat (16) for use as a support for an active catalyst species (18) and a catalytic combustor component (10) incorporating such wash-coat. The wash-coat is a solid solution of alumina or alumina-based material (Al.sub.2O.sub.3-0-3 wt % La.sub.2O.sub.3) and a further oxide exhibiting a coefficient of thermal expansion that is lower than that exhibited by alumina. The further oxide may be silicon dioxide (2-30 wt % SiO.sub.2), zirconia silicate (2-30 wt % ZrSiO.sub.4), neodymium oxide (0-4 wt %), titania (Al.sub.2O.sub.3-3-40% TiO.sub.2) or alumina-based magnesium aluminate spinel (Al.sub.2O.sub.3-25 wt % MgO) in various embodiments. The active catalyst species may be palladium and a second metal in a concentration of 10-50% of the concentration of the palladium.

  2. Task Order Awarded for Technical and Safety Support Services

    Broader source: Energy.gov [DOE]

    Cincinnati - The Department of Energy (DOE) today awarded a contract for technical support services to Link Technologies, Inc., of Germantown, MD for support services to the DOE Office of Environmental Management in Washington D.C.

  3. DOE Gives Mission Support Alliance Top Safety Award

    Broader source: Energy.gov [DOE]

    RICHLAND, Wash. — The Department of Energy (DOE) has awarded contractor Mission Support Alliance (MSA) Star Status in the (DOE) Voluntary Protection Program (VPP) for its mission support services.

  4. Federal and State Structures to Support Financing Utility-Scale...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Federal and State Structures to Support Financing Utility-Scale Solar Projects and the ... DE-AC36-08GO28308 Federal and State Structures to Support Financing Utility-Scale Solar ...

  5. ARM - Research Support for International Polar Year (IPY)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Polar YearResearch Support for International Polar Year (IPY) Research Support International Polar Year Begins at ACRF with 3-week Campaign in Barrow Aerosol Affects on Clouds To...

  6. Take a Closer Look:Biofuels Can Support Environmental, Economic...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Take a Closer Look:Biofuels Can Support Environmental, Economic and Social Goals Citation Details In-Document Search Title: Take a Closer Look:Biofuels Can Support ...

  7. Seneca Nation of Indians Leverages DOE Support for Wind Turbine...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Seneca Nation of Indians Leverages DOE Support for Wind Turbine Project Seneca Nation of Indians Leverages DOE Support for Wind Turbine Project April 28, 2016 - 11:19am Addthis ...

  8. Support for Steffes Corporation, Application for Exception, OHA...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Support for Steffes Corporation, Application for Exception, OHA Case No. EXC-14-0002 Support for Steffes Corporation, Application for Exception, OHA Case No. EXC-14-0002 I am ...

  9. Spring structure for a thermionic converter emitter support arrangement

    SciTech Connect (OSTI)

    Allen, Daniel T.

    1992-01-01

    A support is provided for use in a thermionic converter to support an end of an emitter to keep it out of contact with a surrounding collector while allowing the emitter end to move axially as its temperature changes. The emitter end (34) is supported by a spring structure (44) that includes a pair of Belleville springs, and the spring structure is supported by a support structure (42) fixed to the housing that includes the collector. The support structure is in the form of a sandwich with a small metal spring-engaging element (74) at the front end, a larger metal main support (76) at the rear end that is attached to the housing, and with a ceramic layer (80) between them that is bonded by hot isostatic pressing to the metal element and metal main support. The spring structure can include a loose wafer (120) captured between the Belleville springs.

  10. Spring structure for a thermionic converter emitter support arrangement

    SciTech Connect (OSTI)

    Allen, D.T.

    1992-03-17

    A support is provided for use in a thermionic converter to support an end of an emitter to keep it out of contact with a surrounding collector while allowing the emitter end to move axially as its temperature changes. The emitter end is supported by a spring structure that includes a pair of Belleville springs, and the spring structure is supported by a support structure fixed to the housing that includes the collector. The support structure is in the form of a sandwich with a small metal spring-engaging element at the front end, a larger metal main support at the rear end that is attached to the housing, and with a ceramic layer between them that is bonded by hot isostatic pressing to the metal element and metal main support. The spring structure can include a loose wafer captured between the Belleville springs. 7 figs.

  11. Supporting Calculations For Submerged Bed Scrubber Condensate Disposal Preconceptual Study

    SciTech Connect (OSTI)

    Pajunen, A. J.; Tedeschi, A. R.

    2012-09-18

    This document provides supporting calculations for the preparation of the Submerged Bed Scrubber Condensate Disposal Preconceptual Study report The supporting calculations include equipment sizing, Hazard Category determination, and LAW Melter Decontamination Factor Adjustments.

  12. Commercial-Grade, Scalable Support and Training Services Platform...

    Broader source: Energy.gov (indexed) [DOE]

    and web-based resources in order to deliver services at a low cost. Several support tasks will be researched and developed including a subscription-based support service, web-base...

  13. Los Alamos National Laboratory Investigates Fenton Hill to Support...

    Office of Environmental Management (EM)

    Investigates Fenton Hill to Support Future Land Use Los Alamos National Laboratory Investigates Fenton Hill to Support Future Land Use July 29, 2014 - 12:00pm Addthis Sampling...

  14. Preliminary Evaluation of Surface Soil at the Katy Trail/Vicinity Property (VP9) Area Quarry Residuals-Reports, Studies, Sampling. QY-500-501-1.01.

    Office of Legacy Management (LM)

  15. Supporting large-scale computational science

    SciTech Connect (OSTI)

    Musick, R., LLNL

    1998-02-19

    Business needs have driven the development of commercial database systems since their inception. As a result, there has been a strong focus on supporting many users, minimizing the potential corruption or loss of data, and maximizing performance metrics like transactions per second, or TPC-C and TPC-D results. It turns out that these optimizations have little to do with the needs of the scientific community, and in particular have little impact on improving the management and use of large-scale high-dimensional data. At the same time, there is an unanswered need in the scientific community for many of the benefits offered by a robust DBMS. For example, tying an ad-hoc query language such as SQL together with a visualization toolkit would be a powerful enhancement to current capabilities. Unfortunately, there has been little emphasis or discussion in the VLDB community on this mismatch over the last decade. The goal of the paper is to identify the specific issues that need to be resolved before large-scale scientific applications can make use of DBMS products. This topic is addressed in the context of an evaluation of commercial DBMS technology applied to the exploration of data generated by the Department of Energy`s Accelerated Strategic Computing Initiative (ASCI). The paper describes the data being generated for ASCI as well as current capabilities for interacting with and exploring this data. The attraction of applying standard DBMS technology to this domain is discussed, as well as the technical and business issues that currently make this an infeasible solution.

  16. Cultural intelligence support for military operations

    SciTech Connect (OSTI)

    Guthormsen, Amy M.; MacKerrow, Edward P; Merritt, Terence M; Morgart, Ruth E

    2010-04-08

    It has long been recognized that military success relies on knowledge of the enemy. In the context of standard warfare, adequate knowledge of the enemy may be gained by analyzing observable, measurable data. In the context of modern counterinsurgency operations and the global war on terror, the task of predicting the behavior of the enemy is vastly more complex and difficult. Without an understanding of the ways individuals in the host nation interpret and react to events, no amount of objective information can provide the insight required to accurately predict behavior. US military doctrine has begun to recognize the importance of the many ways that local culture can affect operation success. Increasingly military decision makers use cultural information in the service of operation planning, and troops are provided with pre-deployment cultural training. However, no amount of training can cover the breadth and depth of potentially useful cultural information, and no amount of careful planning can avoid the need to adapt as situations develop. Therefore, a critical challenge is to provide useful tools to US personnel in their efforts to collect, analyze, and utilize cultural information. Essential functions for cultural support tools include the following: (1) to narrow down a broad range of available data and focus the user's attention on context-relevant information, (2) to present cultural information in an easily understood form, (3) to prompt the user to seek relevant information in the environment, (4) to synthesize information, and (5) to predict outcomes based on possible courses of operation. In this paper, we begin by reviewing the ways in which military operations can benefit from cultural intelligence. We then discuss frameworks for analyzing cultural information in the context of a military operation. We conclude with a demonstration of our current efforts to develop a tool that meets the aforementioned functional challenges.

  17. Voluntary Protection Program Onsite Review, Hanford Mission Support...

    Energy Savers [EERE]

    Review, Mission Support Alliance, Llc, Volpentest Hazardous Materials Management and Emergency Response (Hammer), Federal Training Center - September 2014 Voluntary Protection...

  18. Sandia National Laboratories: Careers: Business Support & Operations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Business Support & Operations Photo of Sandia staff Solving the world's most challenging technical problems requires the support of business and operations professionals. Sandia is rich in opportunities for business support and operations professionals to use their education and experience to build flexible solutions in a dynamic research-and-development environment. Our support and operations personnel partner with internationally recognized scientists and engineers to solve the most

  19. Voluntary Protection Program Onsite Review, Hanford Mission Support

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Contract - October 2011 | Department of Energy Hanford Mission Support Contract - October 2011 Voluntary Protection Program Onsite Review, Hanford Mission Support Contract - October 2011 October 2011 Evaluation to determine whether Hanford Mission Support Contract is continuing to perform at a level deserving DOE-VPP Star recognition. The Team conducted its review during September 26-October 6, 2011, to determine whether Mission Support Alliance, LLC is continuing to perform at a level

  20. Enforcement Letter, Mission Support Alliance, LLC | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Mission Support Alliance, LLC Enforcement Letter, Mission Support Alliance, LLC December 3, 2015 Worker Safety and Health Enforcement Letter issued to Mission Support Alliance, LLC On December 3, 2015, the U.S. Department of Energy (DOE) Office of Enterprise Assessments' Office of Enforcement issued an Enforcement Letter (WEL-2015-07) to Mission Support Alliance, LLC, relating to a worker hand injury that occurred during a crane re-spooling operation at DOE's Hanford site. PDF icon Enforcement

  1. Exhibit A: ENSR Modeling in Support of Individual Unit Operation |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy A: ENSR Modeling in Support of Individual Unit Operation Exhibit A: ENSR Modeling in Support of Individual Unit Operation Docket No. EO-05-01: Exhibit A: ENSR Modeling in Support of Individual Unit Operation, part of Supplement Number 3 to the Operating Plan of Mirant Potomac River, LLC PDF icon Exhibit A: ENSR Modeling in Support of Individual Unit Operation More Documents & Publications Comments on Department of Energy's Emergency Order To Resume Limited Operation

  2. Protocol for Enhanced Evaluations of Beyond Design Basis Events Supporting

    Energy Savers [EERE]

    Implementation of Operating Experience Report 2013-01 | Department of Energy Protocol for Enhanced Evaluations of Beyond Design Basis Events Supporting Implementation of Operating Experience Report 2013-01 Protocol for Enhanced Evaluations of Beyond Design Basis Events Supporting Implementation of Operating Experience Report 2013-01 April, 2013 Protocol for Enhanced Evaluations of Beyond Design Basis Events Supporting Implementation of Operating Experience Report 2013-01 To support the

  3. Facility Operations and User Support | National Nuclear Security...

    National Nuclear Security Administration (NNSA)

    continuing product support, software license and maintenance fees, procurement of operational equipment and media, quality and reliability activities, and collaborations. ...

  4. Supporting a Hawaii Hydrogen Economy | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Supporting a Hawaii Hydrogen Economy Supporting a Hawaii Hydrogen Economy Download presentation slides from the DOE Fuel Cell Technologies Office webinar "Supporting a Hawaii Hydrogen Economy" held on July 29, 2014. PDF icon Supporting a Hawaii Hydrogen Economy Webinar Slides More Documents & Publications 2010 Smart Grid Peer Review Day One Morning Presentations 2010 Hydrogen and Fuel Cell Global Commercialization & Development Update Hawaii Hydrogen Energy Park

  5. UNEP-Bioenergy Decision Support Tool | Open Energy Information

    Open Energy Info (EERE)

    Free Equivalent URI: cleanenergysolutions.orgcontentbioenergy-decision-support-tool Language: English DeploymentPrograms: Public-Private Partnerships Regulations: Mandates...

  6. M & O Support Department | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    Management M & O Support Department The M&O Support Department supports pre-award source selection or contract extension negotiation of Management and Operating (M&O) contracts and provides Site Offices with post award M&O contract administration support, including program oversight of the personal and real property, procurement, and contractor human resource management functions. The Department also provides personal and real property management of federal assets for NNSA.

  7. Transit Users Group Supports Transit Agencies with Natural Gas Buses

    SciTech Connect (OSTI)

    Not Available

    2002-04-01

    Fact sheet describes the benefits of the Transit Users Group, which supports transit groups with compressed natural gas (CNG) buses.

  8. Voluntary Protection Program Onsite Review, Portsmouth Facility Support

    Office of Environmental Management (EM)

    Services - March 2013 | Department of Energy Portsmouth Facility Support Services - March 2013 Voluntary Protection Program Onsite Review, Portsmouth Facility Support Services - March 2013 March 2013 Evaluation to determine whether Portsmouth Facility Support Services is continuing to perform at a level deserving DOE-VPP Star recognition. The Team conducted its review during March 11-14, 2013 to determine whether Wastren-EnergX Mission Support, LLC is continuing to perform at a level

  9. EM Releases Supporting Materials From DOE's First National Cleanup

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Workshop | Department of Energy Releases Supporting Materials From DOE's First National Cleanup Workshop EM Releases Supporting Materials From DOE's First National Cleanup Workshop November 9, 2015 - 10:00am Addthis EM Releases Supporting Materials From DOE’s First National Cleanup Workshop WASHINGTON, D.C. - EM is making available support materials from the first-ever DOE National Cleanup Workshop. The materials include links to 15 videos that capture addresses by Energy Secretary

  10. Working with SRNL - Our Facilities - Law Enforcement Support Center -

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Southeast Region Law Enforcement Support Center - Southeast Region Working with SRNL Our Facilities - Law Enforcement Support Center - Southeast Region The Law Enforcement Support Center at SRNL features specialized equipment and technical expertise to help local and regional law enforcement agencies gather and analyze evidence

  11. Inverter power module with distributed support for direct substrate cooling

    DOE Patents [OSTI]

    Miller, David Harold; Korich, Mark D.; Ward, Terence G.; Mann, Brooks S.

    2012-08-21

    Systems and/or methods are provided for an inverter power module with distributed support for direct substrate cooling. An inverter module comprises a power electronic substrate. A first support frame is adapted to house the power electronic substrate and has a first region adapted to allow direct cooling of the power electronic substrate. A gasket is interposed between the power electronic substrate and the first support frame. The gasket is configured to provide a seal between the first region and the power electronic substrate. A second support frame is adapted to house the power electronic substrate and joined to the first support frame to form the seal.

  12. VAR Support from Distributed Wind Energy Resources: Preprint

    SciTech Connect (OSTI)

    Romanowitz, H.; Muljadi, E.; Butterfield, C. P.; Yinger, R.

    2004-07-01

    As the size and quantity of wind farms and other distributed generation facilities increase, especially in relation to local grids, the importance of a reactive power compensator or VAR support from these facilities becomes more significant. Poorly done, it can result in cycling or inadequate VAR support, and the local grid could experience excessive voltage regulation and, ultimately, instability. Improved wind turbine and distributed generation power control technologies are creating VAR support capabilities that can be used to enhance the voltage regulation and stability of local grids. Locating VAR support near the point of consumption, reducing step size, and making the control active all improve the performance of the grid. This paper presents and discusses alternatives for improving the integration of VAR support from distributed generation facilities such as wind farms. We also examine the relative effectiveness of distributed VAR support on the local grid and how it can b e integrated with the VAR support of the grid operator.

  13. A Computuerized Operator Support System Prototype

    SciTech Connect (OSTI)

    Ken Thomas; Ronald Boring; Roger Lew; Tom Ulrich; Richard Villim

    2013-08-01

    A report was published by the Idaho National Laboratory in September of 2012, entitled Design to Achieve Fault Tolerance and Resilience, which described the benefits of automating operator actions for transients. The report identified situations in which providing additional automation in lieu of operator actions would be advantageous. It recognized that managing certain plant upsets is sometimes limited by the operator’s ability to quickly diagnose the fault and to take the needed actions in the time available. Undoubtedly, technology is underutilized in the nuclear power industry for operator assistance during plant faults and operating transients. In contrast, other industry sectors have amply demonstrated that various forms of operator advisory systems can enhance operator performance while maintaining the role and responsibility of the operator as the independent and ultimate decision-maker. A computerized operator support system (COSS) is proposed for use in nuclear power plants to assist control room operators in addressing time-critical plant upsets. A COSS is a collection of technologies to assist operators in monitoring overall plant performance and making timely, informed decisions on appropriate control actions for the projected plant condition. The COSS does not supplant the role of the operator, but rather provides rapid assessments, computations, and recommendations to reduce workload and augment operator judgment and decision-making during fast-moving, complex events. This project proposes a general model for a control room COSS that addresses a sequence of general tasks required to manage any plant upset: detection, validation, diagnosis, recommendation, monitoring, and recovery. The model serves as a framework for assembling a set of technologies that can be interrelated to assist with each of these tasks. A prototype COSS has been developed in order to demonstrate the concept and provide a test bed for further research. The prototype is based on four underlying elements consisting of a digital alarm system, computer-based procedures, PI&D system representations, and a recommender module for mitigation actions. At this point, the prototype simulates an interface to a sensor validation module and a fault diagnosis module. These two modules will be fully integrated in the next version of the prototype. The initial version of the prototype is now operational at the Idaho National Laboratory using the U.S. Department of Energy’s Light Water Reactor Sustainability (LWRS) Human Systems Simulation Laboratory (HSSL). The HSSL is a full-scope, full-scale glass top simulator capable of simulating existing and future nuclear power plant main control rooms. The COSS is interfaced to the Generic Pressurized Water Reactor (gPWR) simulator with industry-typical control board layouts. The glass top panels display realistic images of the control boards that can be operated by touch gestures. A section of the simulated control board was dedicated to the COSS human-system interface (HSI), which resulted in a seamless integration of the COSS into the normal control room environment.

  14. A Computuerized Operator Support System Prototype

    SciTech Connect (OSTI)

    Ken Thomas; Ronald Boring; Roger Lew; Tom Ulrich; Richard Villim

    2013-11-01

    A report was published by the Idaho National Laboratory in September of 2012, entitled Design to Achieve Fault Tolerance and Resilience, which described the benefits of automating operator actions for transients. The report identified situations in which providing additional automation in lieu of operator actions would be advantageous. It recognized that managing certain plant upsets is sometimes limited by the operator’s ability to quickly diagnose the fault and to take the needed actions in the time available. Undoubtedly, technology is underutilized in the nuclear power industry for operator assistance during plant faults and operating transients. In contrast, other industry sectors have amply demonstrated that various forms of operator advisory systems can enhance operator performance while maintaining the role and responsibility of the operator as the independent and ultimate decision-maker. A computerized operator support system (COSS) is proposed for use in nuclear power plants to assist control room operators in addressing time-critical plant upsets. A COSS is a collection of technologies to assist operators in monitoring overall plant performance and making timely, informed decisions on appropriate control actions for the projected plant condition. The COSS does not supplant the role of the operator, but rather provides rapid assessments, computations, and recommendations to reduce workload and augment operator judgment and decision-making during fast-moving, complex events. This project proposes a general model for a control room COSS that addresses a sequence of general tasks required to manage any plant upset: detection, validation, diagnosis, recommendation, monitoring, and recovery. The model serves as a framework for assembling a set of technologies that can be interrelated to assist with each of these tasks. A prototype COSS has been developed in order to demonstrate the concept and provide a test bed for further research. The prototype is based on four underlying elements consisting of a digital alarm system, computer-based procedures, PI&D system representations, and a recommender module for mitigation actions. At this point, the prototype simulates an interface to a sensor validation module and a fault diagnosis module. These two modules will be fully integrated in the next version of the prototype. The initial version of the prototype is now operational at the Idaho National Laboratory using the U.S. Department of Energy’s Light Water Reactor Sustainability (LWRS) Human Systems Simulation Laboratory (HSSL). The HSSL is a full-scope, full-scale glass top simulator capable of simulating existing and future nuclear power plant main control rooms. The COSS is interfaced to the Generic Pressurized Water Reactor (gPWR) simulator with industry-typical control board layouts. The glass top panels display realistic images of the control boards that can be operated by touch gestures. A section of the simulated control board was dedicated to the COSS human-system interface (HSI), which resulted in a seamless integration of the COSS into the normal control room environment.

  15. Remarkable NO oxidation on single supported platinum atoms

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Narula, Chaitanya K.; Allard, Lawrence F.; Stocks, G. M.; Moses-DeBusk, Melanie

    2014-01-01

    Our first-principles density functional theoretical modeling suggests that NO oxidation is feasible on fully oxidized single θ-alumina-supported platinum atoms via a modified Langmuir-Hinshelwood pathway. This is in contrast to the known decrease in NO oxidation activity of supported platinum with decreasing Pt particle size believed to be due to increased platinum oxidation. In order to validate our theoretical study, we evaluated single θ-Al2O3-supported platinum atoms and found them to exhibit remarkable NO oxidation activity. A comparison of turnover frequencies (TOF) of single supported Pt atoms with those of platinum particles for NO oxidation shows that single supported Pt atoms aremore » as active as fully formed platinum particles. The overall picture of NO oxidation on supported Pt is that NO oxidation activity decreases with decreasing Pt particle size but accelerates when Pt is present only as single atoms.« less

  16. CBEI: Stakeholder Engagement Support for the Better Buildings Energy Data

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Accelerator - 2015 Peer Review | Department of Energy Stakeholder Engagement Support for the Better Buildings Energy Data Accelerator - 2015 Peer Review CBEI: Stakeholder Engagement Support for the Better Buildings Energy Data Accelerator - 2015 Peer Review Presenter: Erica Cochran, Carnegie-Mellon University View the Presentation PDF icon CBEI: Stakeholder Engagement Support for the Better Buildings Energy Data Accelerator - 2015 Peer Review More Documents & Publications CBEI: Using DOE

  17. 2010 Pathways to Commercial Success: Technologies and Products Supported by

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    the Fuel Cell Technologies Program | Department of Energy 0 Pathways to Commercial Success: Technologies and Products Supported by the Fuel Cell Technologies Program 2010 Pathways to Commercial Success: Technologies and Products Supported by the Fuel Cell Technologies Program This FY 2010 report updates the results of an effort to identify and characterize commercial and near-commercial (emerging) technologies and products that benefited from the support of the Fuel Cell Technologies Office

  18. 2011 Pathways to Commercial Success: Technologies and Products Supported by

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    the Fuel Cell Technologies Program | Department of Energy 1 Pathways to Commercial Success: Technologies and Products Supported by the Fuel Cell Technologies Program 2011 Pathways to Commercial Success: Technologies and Products Supported by the Fuel Cell Technologies Program This FY 2011 report updates the results of an effort to identify and characterize commercial and near-commercial (emerging) technologies and products that benefited from the support of the Fuel Cell Technologies Office

  19. FACT SHEET: Draft Advanced Fossil Energy Solicitation to Support Reductions

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    in Greenhouse Gas and Other Pollution | Department of Energy FACT SHEET: Draft Advanced Fossil Energy Solicitation to Support Reductions in Greenhouse Gas and Other Pollution FACT SHEET: Draft Advanced Fossil Energy Solicitation to Support Reductions in Greenhouse Gas and Other Pollution July 2, 2013 - 12:16pm Addthis What are the key facts? This solicitation will support projects that avoid, reduce, or sequester air pollutants or greenhouse gas emissions, an important part of the

  20. FY 2014 Scientific Infrastructure Support for Consolidated Innovative

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Nuclear Research FOA | Department of Energy Scientific Infrastructure Support for Consolidated Innovative Nuclear Research FOA FY 2014 Scientific Infrastructure Support for Consolidated Innovative Nuclear Research FOA The Department of Energy's (DOE) Office of Nuclear Energy (NE) conducts crosscutting nuclear energy research and development (R&D) and associated infrastructure support activities to develop innovative technologies that offer the promise of dramatically improved performance

  1. Federal Government Support for Fuel Cell Technologies | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Government Support for Fuel Cell Technologies Federal Government Support for Fuel Cell Technologies Presented by the U.S. Department of Energy on Hydrogen and Fuel Cell State and Regional Initiatives, June 11, 2009 PDF icon state_and_regional_initiatives_budget_2009.pdf More Documents & Publications Federal Support for Hydrogen and Fuel Cell Technologies FY 2011 Budget Roll-Out Presentation Overview of Hydrogen and Fuel Cell Activities: 2011 IPHE Stationary Fuel Cell Workshop

  2. PROJECT PROFILE: Support of International Photovoltaic Module Quality

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Assurance Task Force (PVQAT) | Department of Energy Support of International Photovoltaic Module Quality Assurance Task Force (PVQAT) PROJECT PROFILE: Support of International Photovoltaic Module Quality Assurance Task Force (PVQAT) Funding Opportunity: SuNLaMP SunShot Subprogram: Photovoltaics Location: National Renewable Energy Laboratory, Golden, CO Amount Awarded: $10,055,000 This project supports the National Renewable Energy Laboratory's involvement in the Photovoltaic (PV) Module

  3. Task Order Awarded for Technical Support Services | Department of Energy

    Energy Savers [EERE]

    Task Order Awarded for Technical Support Services Task Order Awarded for Technical Support Services September 26, 2013 - 12:00pm Addthis Media Contact Lynette Chafin, 513-246-0461 Lynette.Chafin@emcbc.doe.gov Cincinnati - The Department of Energy (DOE) today awarded a Task Order for Technical Services to Project Enhancement Corporation, of Germantown, MD, for technical support services at the Environmental Management 13 (EM-13) office in Washington DC. The task order was a competitive small

  4. 2012 Pathways to Commercial Success: Technologies and Products Supported by

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    the Fuel Cell Technologies Program | Department of Energy Pathways to Commercial Success: Technologies and Products Supported by the Fuel Cell Technologies Program 2012 Pathways to Commercial Success: Technologies and Products Supported by the Fuel Cell Technologies Program This FY 2012 report updates the results of an effort to identify and characterize commercial and near-commercial (emerging) technologies and products that benefited from the support of the Fuel Cell Technologies Office

  5. 2013 Pathways to Commercial Success: Technologies and Products Supported by

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    the Fuel Cell Technologies Office | Department of Energy Pathways to Commercial Success: Technologies and Products Supported by the Fuel Cell Technologies Office 2013 Pathways to Commercial Success: Technologies and Products Supported by the Fuel Cell Technologies Office This FY 2013 report updates the results of an effort to identify and characterize commercial and near-commercial (emerging) technologies and products that benefited from the support of the Fuel Cell Technologies Office and

  6. 2014 Pathways to Commercial Success: Technologies and Products Supported by

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    the Fuel Cell Technologies Office | Department of Energy Pathways to Commercial Success: Technologies and Products Supported by the Fuel Cell Technologies Office 2014 Pathways to Commercial Success: Technologies and Products Supported by the Fuel Cell Technologies Office This FY 2014 report updates the results of an effort to identify and characterize commercial and near-commercial (emerging) technologies and products that benefited from the support of the Fuel Cell Technologies Office and

  7. Design and Decision Support Tools | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Commercial Buildings » Design and Decision Support Tools Design and Decision Support Tools CBI works with industry partners and the Building Energy Codes Program to develop design and decision support tools and resources that demonstrate scalable and replicable approaches to achieve high-performance energy efficient new commercial buildings and major retrofits for a variety of building types. These tools and resources serve to inform and guide decision-makers to increase investment in energy

  8. Energy Department Offers Conditional Commitment to Alcoa to Support

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Manufacturing of Aluminum for Automotive Sector | Department of Energy Offers Conditional Commitment to Alcoa to Support Manufacturing of Aluminum for Automotive Sector Energy Department Offers Conditional Commitment to Alcoa to Support Manufacturing of Aluminum for Automotive Sector March 26, 2015 - 9:46am Addthis NEWS MEDIA CONTACT (202) 586-4940 As part of the Administration's effort to support advanced vehicles that are more affordable for Americans to drive, strengthen U.S. leadership

  9. Department of Energy Launches Website Supporting Energy-Saving

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Reconstruction in the Gulf Coast | Department of Energy Website Supporting Energy-Saving Reconstruction in the Gulf Coast Department of Energy Launches Website Supporting Energy-Saving Reconstruction in the Gulf Coast November 22, 2005 - 2:55pm Addthis WASHINGTON, DC - The U.S. Department of Energy (DOE) today launched a Disaster Recovery and Building Reconstruction website at http://www.eere.energy.gov/buildings/ as part of its continuing effort to support hurricane victims in the Gulf

  10. Leveraging Tribal Renewable Resources to Support Military Energy Goals |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Leveraging Tribal Renewable Resources to Support Military Energy Goals Leveraging Tribal Renewable Resources to Support Military Energy Goals May 30-31, 2013 Image of a speaker at the forum. Chandler, Arizona Wild Horse Pass Hotel and Casino The Office of Indian Energy Tribal Leader Energy Forum on "Leveraging Tribal Renewable Resources to Support Military Energy Goals" was held May 30-31, 2013, in Chandler, Arizona. The forum provided information for western

  11. Secretary Chu Highlights Support for Clean Energy and Energy Efficiency

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Projects in Indian Country | Department of Energy Support for Clean Energy and Energy Efficiency Projects in Indian Country Secretary Chu Highlights Support for Clean Energy and Energy Efficiency Projects in Indian Country November 5, 2009 - 12:00am Addthis WASHINGTON, DC - Today at the White House Tribal Nations Conference, U.S. Energy Secretary Steven Chu highlighted the Department of Energy's continued commitment to partnering with Native Americans to support the development of clean

  12. Hanford Waste Treatment Plant Support Task Order Modified | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Hanford Waste Treatment Plant Support Task Order Modified Hanford Waste Treatment Plant Support Task Order Modified March 11, 2013 - 12:00pm Addthis Media Contact Lynette Chafin, 513-246-0461 Lynette.Chafin@emcbc.doe.gov Cincinnati - The Department of Energy (DOE) today awarded a modification to a task order to Aspen Resources Limited, Inc. of Boulder, Colorado for support of the Waste Treatment and Immobilization Plant (WTP) at the Hanford Site. The modification increased the value

  13. Rapid Temperature Swing Adsorption using Polymeric/Supported Amine Hollow

    Office of Scientific and Technical Information (OSTI)

    Fibers (Technical Report) | SciTech Connect Technical Report: Rapid Temperature Swing Adsorption using Polymeric/Supported Amine Hollow Fibers Citation Details In-Document Search Title: Rapid Temperature Swing Adsorption using Polymeric/Supported Amine Hollow Fibers This project is a bench-scale, post-combustion capture project carried out at Georgia Tech (GT) with support and collaboration with GE, Algenol Biofuels, Southern Company and subcontract to Trimeric Corporation. The focus of the

  14. Interim Stabilization Equipment Essential and Support Drawing Plan

    SciTech Connect (OSTI)

    KOCH, M.R.

    1999-10-22

    The purpose of this document is to list the Interim Stabilization equipment drawings that are classified as Essential or Support drawings. Essential Drawings: Those drawings identified by the facility staff as necessary to directly support the safe operation of the facility or equipment. Support Drawings: Those drawings identified by the facility staff that further describe the design details of structures, systems or components shown on essential drawings.

  15. Low temperature oxidation using support molten salt catalysts

    DOE Patents [OSTI]

    Weimer, Alan W.; Czerpak, Peter J.; Hilbert, Patrick M.

    2003-05-20

    Molten salt reactions are performed by supporting the molten salt on a particulate support and forming a fluidized bed of the supported salt particles. The method is particularly suitable for combusting hydrocarbon fuels at reduced temperatures, so that the formation NO.sub.x species is reduced. When certain preferred salts are used, such as alkali metal carbonates, sulfur and halide species can be captured by the molten salt, thereby reducing SO.sub.x and HCl emissions.

  16. Los Alamos names new head of stockpile manufacturing and support

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New head of stockpile manufacturing and support Los Alamos names new head of stockpile manufacturing and support Carl Beard is the new associate director for stockpile manufacturing and support. Beard has held this position in an acting capacity since June 2007. January 22, 2008 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy

  17. Emergency Support Function #12; Energy Annex | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Support Function #12; Energy Annex Emergency Support Function #12; Energy Annex Emergency Support Function (ESF) #12 - Energy is intended to facilitate the restoration of damaged energy systems and components when activated by the Secretary of Homeland Security for incidents requiring a coordinated Federal response. Under Department of Energy (DOE) leadership, ESF #12 is an integral part of the larger DOE responsibility of maintaining continuous and reliable energy supplies for the United States

  18. Energy Department Finalizes Loan Guarantee to Support California Solar

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Generation Project | Department of Energy to Support California Solar Generation Project Energy Department Finalizes Loan Guarantee to Support California Solar Generation Project September 30, 2011 - 3:15pm Addthis Washington, D.C. -- U.S. Energy Secretary Steven Chu today announced that the Department finalized partial loan guarantees of $1.46 billion in loans to Desert Sunlight 250, LLC and Desert Sunlight 300, LLC to support the Desert Sunlight Project. The 550 MW project is expected to

  19. Facility Operations and User Support | National Nuclear Security

    National Nuclear Security Administration (NNSA)

    Administration Facility Operations and User Support This sub-program provides both necessary physical facility and operational support for reliable, cross-lab production computing and storage environments as well as a suite of user services for effective use of ASC tri-lab computing resources. The scope of the facility operations includes planning, integration and deployment, continuing product support, software license and maintenance fees, procurement of operational equipment and media,

  20. Test Plan for Solvent Extraction Data Acquisition to Support Modeling

    Office of Scientific and Technical Information (OSTI)

    Efforts (Technical Report) | SciTech Connect Technical Report: Test Plan for Solvent Extraction Data Acquisition to Support Modeling Efforts Citation Details In-Document Search Title: Test Plan for Solvent Extraction Data Acquisition to Support Modeling Efforts This testing will support NEAMS SafeSep Modeling efforts related to droplet simulation in liquid-liquid extraction equipment. Physical characteristic determinations will be completed for the fluids being used in the experiment

  1. Bipartisan Support for the Department's Loan Program | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Support for the Department's Loan Program Bipartisan Support for the Department's Loan Program In his November 2011 Congressional testimony on the Department's loan program, the Secretary said, "We appreciate the support the loan programs have received from many members of Congress - including nearly 500 letters to the Department - who have urged us to accelerate our efforts and to fund worthy projects in their states." PDF icon Congressional_Letters_2006-2011.pdf More Documents &

  2. Breakout Group 1: Catalysts and Supports | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1: Catalysts and Supports Breakout Group 1: Catalysts and Supports Report from Breakout Group 1 of the Fuel Cell Pre-Solicitation Workshop, January 23-24, 2008 PDF icon fc_pre-solicitation_workshop_catalysts_supports.pdf More Documents & Publications Breakout Group 2: Membrane Electrode Assemblies DOE Fuel Cell Pre-Solicitation Workshop - Breakout Group 1: Catalysts DOE Fuel Cell Pre-Solicitation Workshop - Breakout Group 5: Long-Term Innovative Technologies

  3. Adsorption and diffusion of Ru adatoms on Ru(0001)-supported...

    Office of Scientific and Technical Information (OSTI)

    Accepted Manuscript: Adsorption and diffusion of Ru adatoms on Ru(0001)-supported graphene: Large-scale first-principles calculations This content will become publicly available on...

  4. Audit of Department of Energy Support Service Contracting, CR...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    it needs to acquire special knowledge and skills not available within the Department or ... The Department negotiated and paid four of six support service contractors an estimated ...

  5. Voluntary Protection Program Onsite Review, Mission Support Alliance...

    Office of Environmental Management (EM)

    Llc, Volpentest Hazardous Materials Management and Emergency Response (Hammer), Federal Training Center - September 2014 Voluntary Protection Program Onsite Review, Mission Support...

  6. Technical support document: Energy efficiency program for commercial...

    Office of Scientific and Technical Information (OSTI)

    Technical support document: Energy efficiency program for commercial and industrial equipment: electrical distribution transformers. ANOPR version Citation Details In-Document ...

  7. Efficient magnetic fields for supporting toroidal plasmas (Journal...

    Office of Scientific and Technical Information (OSTI)

    Efficient magnetic fields for supporting toroidal plasmas Citation Details In-Document Search This content will become publicly available on March 15, 2017 Title: Efficient ...

  8. Verifying Greenhouse Gas Emissions: Methods to Support International...

    Open Energy Info (EERE)

    Climate Agreements Jump to: navigation, search Tool Summary Name: Verifying Greenhouse Gas Emissions: Methods to Support International Climate Agreements AgencyCompany...

  9. Energy Department Launches Microgrid Competition to Support Resiliency...

    Broader source: Energy.gov (indexed) [DOE]

    586-4940 WASHINGTON - Today, the Energy Department launched the Microgrid 2014 MVP Challenge, a competition to support resiliency and adaptation in communities across America. The...

  10. Identification of Selected Areas to Support Federal Clean Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Evaluation of Potential Locations for Siting Small Modular Reactors near Federal Energy Clusters to Support Federal Clean Energy Goals Population Sensitivity Evaluation of Two ...

  11. Industry and Bipartisan Support for Fisker and Tesla Loans |...

    Broader source: Energy.gov (indexed) [DOE]

    Industry and Bipartisan Support for Fisker and Tesla Loans.pdf More Documents & Publications Before the Subcommittee on Economic Growth, Job Creation and Regulatory Affairs - House...

  12. Research Call to DOE/Federal Laboratories: Technical Support...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Research Call to DOEFederal Laboratories: Technical Support for Interconnection-Level Electric Infrastructure Planning RC-BM-2010; Due May 3, 2010. Research Call to DOEFederal ...

  13. DOE Awards Small Business Contract for Support, Planning Services...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy (DOE) today awarded a 1.5 million contact (task order) to Trinity Engineering Associates, Inc. of Cincinnati, Ohio for planning and support functions for...

  14. ARM - ARM Education and Outreach Efforts Support IPY

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of interviews with Alaskan native peoples to support IPY multimedia outreach efforts. ... The multimedia kiosk information is available on disk for use by teachers and students ...

  15. Compact fluid cooled power converter supporting multiple circuit boards

    DOE Patents [OSTI]

    Radosevich, Lawrence D.; Meyer, Andreas A.; Beihoff, Bruce C.; Kannenberg, Daniel G.

    2005-03-08

    A support may receive one or more power electronic circuits. The support may aid in removing heat from the circuits through fluid circulating through the support. The support, in conjunction with other packaging features may form a shield from both external EMI/RFI and from interference generated by operation of the power electronic circuits. Features may be provided to permit and enhance connection of the circuitry to external circuitry, such as improved terminal configurations. Modular units may be assembled that may be coupled to electronic circuitry via plug-in arrangements or through interface with a backplane or similar mounting and interconnecting structures.

  16. Department of Energy Offers Support for Arizona Solar Project...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The loan guarantee will support the construction of a 290-megawatt photovoltaic solar ... The project sponsor, NRG Solar, estimates the project will be the largest photovoltaic ...

  17. President Obama Announces New Advances and Commitments to Support...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    the Generation Indigenous (Gen-I) Initiative and other advances and commitments to support tribal nations. President Obama launched the Gen-I Initiative at the 2014 White ...

  18. How Energy Savings Performance Contracting Can Support State...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    How Energy Savings Performance Contracting Can Support State Climate and Energy Planning ... look like to include energy savings performance contracting in their climate and energy ...

  19. Health Physics Support Assistant | Princeton Plasma Physics Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Saville Requisition Number: 1500691 POSITIONAL SUMMARY: To support the Health Physics Dosimeter program, records management (both archival and electronic) and to backup the ES&HS...

  20. Using support vector machines to improve elemental ion identification...

    Office of Scientific and Technical Information (OSTI)

    elemental ions in X-ray crystal structures has been extended to use support vector machine (SVM) classifiers trained on selected structures in the PDB, with significantly...

  1. Project Management and Systems Support | National Nuclear Security...

    National Nuclear Security Administration (NNSA)

    Project Management and Systems Support | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile Preventing Proliferation ...

  2. Research Call to DOE/Federal Laboratories: Technical Support...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Research Call to DOEFederal Laboratories: Technical Support for Interconnection-Level Electric Infrastructure Planning RC-BM-2010; Due May 3, 2010. Research Call to DOEFederal...

  3. Ghana-Support for Future National Climate Change Policy Framework...

    Open Energy Info (EERE)

    Jump to: navigation, search Name CDKN-Ghana-Support for Future National Climate Change Policy Framework AgencyCompany Organization Climate and Development Knowledge Network...

  4. NUCLEAR REACTORS; PIPES; SEISMIC EFFECTS; SUPPORTS; DYNAMIC LOADS...

    Office of Scientific and Technical Information (OSTI)

    Limit analysis of pipe clamps Flanders, H.E. Jr. 22 GENERAL STUDIES OF NUCLEAR REACTORS; PIPES; SEISMIC EFFECTS; SUPPORTS; DYNAMIC LOADS; HEAT TRANSFER; HYDRAULICS; REACTOR SAFETY;...

  5. A Brief Summary of Research Results Supported by Institutional...

    Office of Scientific and Technical Information (OSTI)

    Title: A Brief Summary of Research Results Supported by Institutional Computing under Project W11MagUniv Authors: Li, Hui 1 + Show Author Affiliations Los Alamos National ...

  6. A Brief Summary of Research Results Supported by Institutional...

    Office of Scientific and Technical Information (OSTI)

    Title: A Brief Summary of Research Results Supported by Institutional Computing under Project W11Exoplanet Authors: Li, Hui 1 + Show Author Affiliations Los Alamos National ...

  7. Hyperspectral Mineral Mapping In Support Of Geothermal Exploration...

    Open Energy Info (EERE)

    CA and Dixie Valley, NV, USA Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Paper: Hyperspectral Mineral Mapping In Support Of Geothermal...

  8. How Ratepayer-Funded Efficiency Can Support State Climate and...

    Broader source: Energy.gov (indexed) [DOE]

    energy efficiency programs in their climate and energy plans, including current ... PDF icon How Ratepayer-Funded Efficiency Can Support State Climate and Energy Planning ...

  9. Department of Energy Announces Funding to Support the Next Generation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    energy. These programs will increase American economic competitiveness and support job growth by promoting science, technology, engineering, and math (STEM) education, an...

  10. Large Hospital 50% Energy Savings: Technical Support Document

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Hospital 50% Energy Savings: Technical Support Document Eric Bonnema, Daniel Studer, Andrew Parker, Shanti Pless, and Paul Torcellini National Renewable Energy Laboratory 1617 ...

  11. Sandia Energy - Materials Science and Engineering Support for...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Materials Science and Engineering Support for Microsystems-Enabled Photovoltaic Grand Challenge Laboratory-Directed Research and Development Project Home Renewable Energy Energy...

  12. ARM - Field Campaign - Lidar support for ICECAPS at Summit, Greenland

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    govCampaignsLidar support for ICECAPS at Summit, Greenland Campaign Links ICECAPS Campaign Summary (PDF) Summit Station Research Highlight New Data from Greenland for Arctic...

  13. How Energy Efficiency Programs Can Support State Climate and...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    including building energy codes, city-led efficiency programs, combined heat and ... More Documents & Publications How City-Led Efficiency Efforts Can Support State Climate ...

  14. Calculations in Support of JAEA Experiments. Update Oct 2015

    SciTech Connect (OSTI)

    Goda, Joetta Marie; James, Michael R.

    2015-10-16

    An update on calculations provided in support of the Japanese Atomic Energy Agency (JAEA) experiments is summarized in PowerPoint form.

  15. OST opens new logistics support site | National Nuclear Security...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    OST opens new logistics support site | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile Preventing Proliferation...

  16. Method of fabrication of supported liquid membranes (Patent)...

    Office of Scientific and Technical Information (OSTI)

    Citation Details In-Document Search Title: Method of fabrication of supported liquid ... This site is a product of DOE's Office of Scientific and Technical Information (OSTI) and ...

  17. Fire Protection Support Engineer | Princeton Plasma Physics Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Fire Protection Support Engineer Department: Engineering Supervisor(s): Scott Decker Staff: AM 03 Requisition Number: 1600200 Position Summary: Assists project engineer with any ...

  18. How ASC Supports the Science-based Stockpile Stewardship Program...

    National Nuclear Security Administration (NNSA)

    ASC Supports the Science-based Stockpile Stewardship Program | National Nuclear Security ... Home About Us Our Programs Defense Programs Future Science & Technology Programs ...

  19. DOE Sustainability Support Information Brief on Executive Order...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE Sustainability Support Information Brief on Executive Order 12898, Federal Actions to Address Environmental Justice in Minority and Low-Income Populations DOE Sustainability ...

  20. ESnet supports Sandia and APNIC IPv6 Background Radiation research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sandia and APNIC IPv6 Background Radiation research ESnet is currently supporting the Asia-Pacific Network Information Centre (APNIC) and Sandia National Laboratories in their...

  1. SolTrace Support | Concentrating Solar Power | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Support The best place to find answers about using SolTrace are found in the software's Help system - just click Help Contents under the Help menu or select Help from the system tree in the main SolTrace screen. Currently, there are no user guides or other reference manuals. You may send questions and comments to the user support team at SolTrace Support. However, there is a very limited budget for support, so complex requests may be difficult to accommodate

  2. Indonesia-IISD NAMA Support | Open Energy Information

    Open Energy Info (EERE)

    Name Indonesia-IISD NAMA Support AgencyCompany Organization International Institute for Sustainable Development (IISD) Sector Climate Topics Background analysis, Low emission...

  3. Vietnam-IISD NAMA Support | Open Energy Information

    Open Energy Info (EERE)

    Name Vietnam-IISDNAMA Support AgencyCompany Organization International Institute for Sustainable Development (IISD) Sector Climate Topics Background analysis, Low emission...

  4. Geologic Carbon Dioxide Storage Field Projects Supported by DOE...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The program has also been supporting a number of complementary R&D projects investigating the science of storage, simulation, risk assessment, and monitoring the fate of the ...

  5. Categorization of Used Nuclear Fuel Inventory in Support of a...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    National Nuclear Fuel Cycle Strategy Categorization of Used Nuclear Fuel Inventory in Support of a Comprehensive National Nuclear Fuel Cycle Strategy The Office of Nuclear Energy ...

  6. Coded aperture imaging with self-supporting uniformly redundant arrays

    DOE Patents [OSTI]

    Fenimore, Edward E.

    1983-01-01

    A self-supporting uniformly redundant array pattern for coded aperture imaging. The present invention utilizes holes which are an integer times smaller in each direction than holes in conventional URA patterns. A balance correlation function is generated where holes are represented by 1's, nonholes are represented by -1's, and supporting area is represented by 0's. The self-supporting array can be used for low energy applications where substrates would greatly reduce throughput. The balance correlation response function for the self-supporting array pattern provides an accurate representation of the source of nonfocusable radiation.

  7. Department of Energy Announces Funding to Support the Next Generation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    These programs will increase American economic competitiveness and support job growth by promoting science, technology, engineering, and math (STEM) education, an essential part of ...

  8. How Energy Savings Performance Contracting Can Support State...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    levels, best practices, energy savings examples, cost-effectiveness, EM&V and DOE support. ... Savings Measurement and Verification (M&V) Developing an Evaluation Measurement and ...

  9. CESC-Webinar: Financial and Policy Innovations to Support Energy...

    Open Energy Info (EERE)

    Financial and Policy Innovations to Support Energy Efficiency: Energy Performance Contracting and On-Bill Financing Jump to: navigation, search Tool Summary LAUNCH TOOL Name:...

  10. DOE Awards Support Service Contract | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Application Maintenance Support and associated Program elements as well as project management, professional engineering and scientific disciplines The contractor shall provide...

  11. DOE Seeks Proposals for Support Services at Denver Federal Center

    Broader source: Energy.gov [DOE]

    Cincinnati - The Department of Energy today issued a Request for Proposals (RFP) for Technical and Administrative Support Services for Building 55 at Denver Federal Center, Lakewood, Colorado.

  12. El Salvador - National Climate Change Strategy Support | Open...

    Open Energy Info (EERE)

    El Salvador - National Climate Change Strategy Support Jump to: navigation, search Name National Climate Change Strategy of El Salvador AgencyCompany Organization Climate and...

  13. EERE Postdoctoral Research Awards Letter of Support from Research Mentor

    Broader source: Energy.gov [DOE]

    EERE Postdoctoral Research Awards Letter of Support from Research Mentor, from the U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy.

  14. NREL Supports Industry to Develop Computer-Aided Engineering...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NREL Supports Industry to Develop Computer-Aided Engineering Tools for Car Batteries July ... tools to help produce the next generation of electric drive vehicle (EDV) batteries. ...

  15. ORISE: Providing Support to the DOE Joint Information Center

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Joint Information Center (JIC) ORISE supports DOE's Oak Ridge Office by managing crisis communication facility for drills, exercises and emergencies In the event of an emergency,...

  16. Carbon Geography: The Political Economy of Congressional Support...

    Office of Scientific and Technical Information (OSTI)

    Carbon Geography: The Political Economy of Congressional Support for Legislation Intended to Mitigate Greenhouse Gas Production Citation Details In-Document Search Title: Carbon ...

  17. Energy Department Announces $3 Million to Support Clean Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    across the country to help unleash the creative potential of America's entrepreneurs. ... These organizations will support early-stage companies as they scale to production and ...

  18. Statement of Work-National Environmental Policy Act (NEPA) Support...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Statement of Work-National Environmental Policy Act (NEPA) Support Services Acquisition: Preparation and Review of Environmental Impact Statements, Environmental Assessments, ...

  19. Using Operational Security (OPSEC) to Support a Cyber Security...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    a Cyber Security Culture in Control Systems Environments Using Operational Security (OPSEC) to Support a Cyber Security Culture in Control Systems Environments This document ...

  20. SOC-Los Alamos and major subcontractors support northern New...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Alamos and major subcontractors support northern New Mexico Currently offered Industry Cluster Development Grants are latest funding initiative October 1, 2014 SOC-Los Alamos' Jack...

  1. NREL-Decision-Support Tools Demonstration | Open Energy Information

    Open Energy Info (EERE)

    TOOL Name: Decision-Support Tools AgencyCompany Organization: National Renewable Energy Laboratory Sector: Energy Topics: Policiesdeployment programs, Pathways analysis,...

  2. NREL: Technology Deployment - Electric Utility Assistance and Support

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Electric Utility Assistance and Support NREL provides data-driven support, assistance, and tools to electric utilities to help further the integration of renewable energy and energy efficiency technologies into the electric grid. Distributed Generation Interconnection Collaborative The Distributed Generation Interconnection Collaborative aims to share knowledge on distributed photovoltaic interconnection practices and innovation. The collaborative hosts monthly informational meetings on

  3. NREL: Technology Deployment - Project Technical Assistance and Support

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Project Technical Assistance and Support NREL provides technical assistance and support for projects around the globe by assessing resources, analyzing designs, and guiding project implementation to help identify clean energy solutions. Learn more about NREL's work in the following areas: Federal Agencies Federal Agencies International International Islands Islands Research Campuses Research Campuses State and Local Governments State and Local Governments Tribes Tribes Utilities Utilities

  4. SUPPORT ADMINISTRATIVE SERVICES FOR THE NATIONAL ENERGY TECHNOLOGY

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 SUPPORT ADMINISTRATIVE SERVICES FOR THE NATIONAL ENERGY TECHNOLOGY LABORATORY TABLE OF CONTENTS SECTION B - SUPPLIES OR SERVICES AND PRICES/COSTS ........................................................................ 8 B.1 SERVICES BEING ACQUIRED - SUPPORT ADMINISTRATIVE SERVICES ................................. 8 B.2 GUARANTEED MINIMUM CONTRACT VALUE - MAXIMUM AVAILABLE PERFORMANCE AWARD FEE

  5. Attrition resistant Fischer-Tropsch catalyst and support

    DOE Patents [OSTI]

    Singleton, Alan H.; Oukaci, Rachid; Goodwin, James G.

    2004-05-25

    A catalyst support having improved attrition resistance and a catalyst produced therefrom. The catalyst support is produced by a method comprising the step of treating calcined .gamma.-alumina having no catalytic material added thereto with an acidic aqueous solution having an acidity level effective for increasing the attrition resistance of the calcined .gamma.-alumina.

  6. Voluntary Protection Program Onsite Review, Mission Support Alliance, Llc,

    Energy Savers [EERE]

    Volpentest Hazardous Materials Management and Emergency Response (Hammer), Federal Training Center - September 2014 | Department of Energy Mission Support Alliance, Llc, Volpentest Hazardous Materials Management and Emergency Response (Hammer), Federal Training Center - September 2014 Voluntary Protection Program Onsite Review, Mission Support Alliance, Llc, Volpentest Hazardous Materials Management and Emergency Response (Hammer), Federal Training Center - September 2014 September 2014

  7. Hole-thru-laminate mounting supports for photovoltaic modules

    DOE Patents [OSTI]

    Wexler, Jason; Botkin, Jonathan; Culligan, Matthew; Detrick, Adam

    2015-02-17

    A mounting support for a photovoltaic module is described. The mounting support includes a pedestal having a surface adaptable to receive a flat side of a photovoltaic module laminate. A hole is disposed in the pedestal, the hole adaptable to receive a bolt or a pin used to couple the pedestal to the flat side of the photovoltaic module laminate.

  8. Mission Support Contract Performance Evaluation and Measurement Plan

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4 Contract No. DE-AC06-09RL14728 Modification XXX FY14 Mission Support Contract Performance Evaluation and Measurement Plan Printed on: August 13, 2014 Mission Support Contract Section J - July 2014 Contract No. DE-AC06-09RL14728 Modification 394 TABLE OF CONTENTS 1. INTRODUCTION .................................................................................................................................................................................. 3 2. ALLOCATION OF AVAILABLE FEE

  9. Office of Environmental Protection, Sustainability Support & Corporate

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Safety Analysis | Department of Energy Environmental Protection, Sustainability Support & Corporate Safety Analysis Office of Environmental Protection, Sustainability Support & Corporate Safety Analysis Mission The Office of Environmental, Sustainability and Operational Analysis establishes environmental protection requirements and expectations for the Department to ensure protection of workers and the public and protection of the environment from the hazards associated with all

  10. HPC Analytics Support. Requirements for Uncertainty Quantification Benchmarks

    SciTech Connect (OSTI)

    Paulson, Patrick R.; Purohit, Sumit; Rodriguez, Luke R.

    2015-05-01

    This report outlines techniques for extending benchmark generation products so they support uncertainty quantification by benchmarked systems. We describe how uncertainty quantification requirements can be presented to candidate analytical tools supporting SPARQL. We describe benchmark data sets for evaluating uncertainty quantification, as well as an approach for using our benchmark generator to produce data sets for generating benchmark data sets.

  11. Anisotropic microporous supports impregnated with polymeric ion-exchange materials

    DOE Patents [OSTI]

    Friesen, D.; Babcock, W.C.; Tuttle, M.

    1985-05-07

    Novel ion-exchange media are disclosed, the media comprising polymeric anisotropic microporous supports containing polymeric ion-exchange or ion-complexing materials. The supports are anisotropic, having small exterior pores and larger interior pores, and are preferably in the form of beads, fibers and sheets. 5 figs.

  12. Utility Community Solar Handbook- Understanding and Supporting Utility Program Development

    Broader source: Energy.gov [DOE]

    The "Utility Community Solar Handbook: Understanding and Supporting Utility Program Development" provides the utility's perspective on community solar program development and is a resource for government officials, regulators, community organizers, solar energy advocates, non-profits, and interested citizens who want to support their local utilities in implementing projects.

  13. Silica-Supported Tantalum Clusters: Catalyst for Alkane Conversion

    SciTech Connect (OSTI)

    Nemana ,S.; Gates, B.

    2006-01-01

    Silica-supported tantalum clusters (on average, approximately tritantalum) were formed by the treatment, in either H{sub 2} or ethane, of adsorbed Ta(CH{sub 2}Ph){sub 5}; the supported catalyst is active for ethane conversion to methane and propane at 523 K, with the used catalyst containing clusters of the same average nuclearity as the precursor.

  14. Technical support document: Energy efficiency program for commercial and

    Office of Scientific and Technical Information (OSTI)

    industrial equipment: electrical distribution transformers. ANOPR version (Technical Report) | SciTech Connect Technical support document: Energy efficiency program for commercial and industrial equipment: electrical distribution transformers. ANOPR version Citation Details In-Document Search Title: Technical support document: Energy efficiency program for commercial and industrial equipment: electrical distribution transformers. ANOPR version No abstract prepared. Authors: Stoops, John ;

  15. Redox flow batteries based on supporting solutions containing chloride

    DOE Patents [OSTI]

    Li, Liyu; Kim, Soowhan; Yang, Zhenguo; Wang, Wei; Nie, Zimin; Chen, Baowei; Zhang, Jianlu; Xia, Guanguang

    2015-07-07

    Redox flow battery systems having a supporting solution that contains Cl.sup.- ions can exhibit improved performance and characteristics. Furthermore, a supporting solution having mixed SO.sub.4.sup.2- and Cl.sup.- ions can provide increased energy density and improved stability and solubility of one or more of the ionic species in the catholyte and/or anolyte. According to one example, a vanadium-based redox flow battery system is characterized by an anolyte having V.sup.2+ and V.sup.3+ in a supporting solution and a catholyte having V.sup.4+ and V.sup.5+ in a supporting solution. The supporting solution can contain Cl.sup.- ions or a mixture of SO.sub.4.sup.2- and Cl.sup.- ions.

  16. Redox flow batteries based on supporting solutions containing chloride

    DOE Patents [OSTI]

    Li, Liyu; Kim, Soowhan; Yang, Zhenguo; Wang, Wei; Zhang, Jianlu; Chen, Baowei; Nie, Zimin; Xia, Guanguang

    2014-01-14

    Redox flow battery systems having a supporting solution that contains Cl.sup.- ions can exhibit improved performance and characteristics. Furthermore, a supporting solution having mixed SO.sub.4.sup.2- and Cl.sup.- ions can provide increased energy density and improved stability and solubility of one or more of the ionic species in the catholyte and/or anolyte. According to one example, a vanadium-based redox flow battery system is characterized by an anolyte having V.sup.2+ and V.sup.3+ in a supporting solution and a catholyte having V.sup.4+ and V.sup.5+ in a supporting solution. The supporting solution can contain Cl.sup.- ions or a mixture of SO.sub.4.sup.2- and Cl.sup.- ions.

  17. Redox flow batteries based on supporting solutions containing chloride

    DOE Patents [OSTI]

    Li, Liyu; Kim, Soowhan; Yang, Zhenguo; Wang, Wei; Nie, Zimin; Chen, Baowei; Zhang, Jianlu; Xia, Guanguang

    2015-09-01

    Redox flow battery systems having a supporting solution that contains Cl.sup.- ions can exhibit improved performance and characteristics. Furthermore, a supporting solution having mixed SO.sub.4.sup.2- and Cl.sup.- ions can provide increased energy density and improved stability and solubility of one or more of the ionic species in the catholyte and/or anolyte. According to one example, a vanadium-based redox flow battery system is characterized by an anolyte having V.sup.2+ and V.sup.3+ in a supporting solution and a catholyte having V.sup.4+ and V.sup.5+ in a supporting solution. The supporting solution can contain Cl.sup.- ions or a mixture of SO.sub.4.sup.2- and Cl.sup.- ions.

  18. Method for forming thermally stable nanoparticles on supports

    DOE Patents [OSTI]

    Roldan Cuenya, Beatriz; Naitabdi, Ahmed R.; Behafarid, Farzad

    2013-08-20

    An inverse micelle-based method for forming nanoparticles on supports includes dissolving a polymeric material in a solvent to provide a micelle solution. A nanoparticle source is dissolved in the micelle solution. A plurality of micelles having a nanoparticle in their core and an outer polymeric coating layer are formed in the micelle solution. The micelles are applied to a support. The polymeric coating layer is then removed from the micelles to expose the nanoparticles. A supported catalyst includes a nanocrystalline powder, thin film, or single crystal support. Metal nanoparticles having a median size from 0.5 nm to 25 nm, a size distribution having a standard deviation .ltoreq.0.1 of their median size are on or embedded in the support. The plurality of metal nanoparticles are dispersed and in a periodic arrangement. The metal nanoparticles maintain their periodic arrangement and size distribution following heat treatments of at least 1,000.degree. C.

  19. Support arrangements for core modules of nuclear reactors. [PWR

    DOE Patents [OSTI]

    Bollinger, L.R.

    1983-11-03

    A support arrangement is provided for the core modules of a nuclear reactor which provides support access through the control drive mechanisms of the reactor. This arrangement provides axial support of individual reactor core modules from the pressure vessel head in a manner which permits attachment and detachment of the modules from the head to be accomplished through the control drive mechanisms after their leadscrews have been removed. The arrangement includes a module support nut which is suspended from the pressure vessel head and screw threaded to the shroud housing for the module. A spline lock prevents loosening of the screw connection. An installation tool assembly, including a cell lifting and preloading tool and a torquing tool, fits through the control drive mechanism and provides lifting of the shroud housing while disconnecting the spline lock, as well as application of torque to the module support nut.

  20. Support arrangement for core modules of nuclear reactors

    DOE Patents [OSTI]

    Bollinger, Lawrence R.

    1987-01-01

    A support arrangement is provided for the core modules of a nuclear reactor which provides support access through the control drive mechanisms of the reactor. This arrangement provides axial support of individual reactor core modules from the pressure vessel head in a manner which permits attachment and detachment of the modules from the head to be accomplished through the control drive mechanisms after their leadscrews have been removed. The arrangement includes a module support nut which is suspended from the pressure vessel head and screw threaded to the shroud housing for the module. A spline lock prevents loosening of the screw connection. An installation tool assembly, including a cell lifting and preloading tool and a torquing tool, fits through the control drive mechanism and provides lifting of the shroud housing while disconnecting the spline lock, as well as application of torque to the module support nut.

  1. Support shape effect in metal oxide catalysis: ceria nanoshapes supported vanadia catalysts for oxidative dehydrogenation of iso-butane

    SciTech Connect (OSTI)

    Wu, Zili; Schwartz, Viviane; Li, Meijun; Rondinone, Adam Justin; Overbury, Steven {Steve} H

    2012-01-01

    The activation energy of VOx/CeO2 catalysts in oxidative dehydrogenation of iso-butane was found dependent on the shape of ceria support: rods < octahedra, closely related to the surface oxygen vacancy formation energy and defects amount of the two ceria supports with different crystallographic surface planes.

  2. DOE TRANSCOM Technical Support Services DE-EM0002903 SECTION J - LIST OF ATTACHMENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8 SERVICE CONTRACT ACT WAGE DETERMINATION DOE TRANSCOM Technical Support Services DE-EM0002903 DOE TRANSCOM Technical Support Services DE-EM0002903 DOE TRANSCOM Technical Support Services DE-EM0002903 DOE TRANSCOM Technical Support Services DE-EM0002903 DOE TRANSCOM Technical Support Services DE-EM0002903 DOE TRANSCOM Technical Support Services DE-EM0002903 DOE TRANSCOM Technical Support Services DE-EM0002903 DOE TRANSCOM Technical Support Services DE-EM0002903 DOE TRANSCOM Technical Support

  3. Graphite fiber reinforced structure for supporting machine tools

    DOE Patents [OSTI]

    Knight, Jr., Charles E.; Kovach, Louis; Hurst, John S.

    1978-01-01

    Machine tools utilized in precision machine operations require tool support structures which exhibit minimal deflection, thermal expansion and vibration characteristics. The tool support structure of the present invention is a graphite fiber reinforced composite in which layers of the graphite fibers or yarn are disposed in a 0/90.degree. pattern and bonded together with an epoxy resin. The finished composite possesses a low coefficient of thermal expansion and a substantially greater elastic modulus, stiffness-to-weight ratio, and damping factor than a conventional steel tool support utilized in similar machining operations.

  4. Federal Support for Hydrogen and Fuel Cell Technologies | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Federal Support for Hydrogen and Fuel Cell Technologies Federal Support for Hydrogen and Fuel Cell Technologies This presentation, which focuses on federal support for hydrogen and fuel cell technologies, was given by Patrick Davis at the State and Regional Hydrogen and Fuel Cell Initiatives Meeting in May 2007. PDF icon states_call0507.pdf More Documents & Publications FY 2011 Budget Roll-Out Presentation FY 2007 Operating Plan for DOE--March 16, 2007.xls FY 2007 Operating Plan

  5. SRS Environmental Bioassay Laboratory Support Aids Japan | Department of

    Energy Savers [EERE]

    Energy Environmental Bioassay Laboratory Support Aids Japan SRS Environmental Bioassay Laboratory Support Aids Japan August 10, 2011 - 12:00pm Addthis SRS Environmental Bioassay Laboratory Support Aids Japan Media Contacts Jim Giusti, DOE james-r.giusti@srs.gov 803-952-7697 Barbara Smoak, SRNS barbara.smoak@srs.gov 803-952-8060 AIKEN, SC- On March 11, 2011, an earthquake and a tsunami wave triggered a string of disasters in Japan that created an outpouring of relief efforts to assist the

  6. High surface area graphene-supported metal chalcogenide assembly

    DOE Patents [OSTI]

    Worsley, Marcus A.; Kuntz, Joshua; Orme, Christine A.

    2016-04-19

    A composition comprising at least one graphene-supported assembly, which comprises a three-dimensional network of graphene sheets crosslinked by covalent carbon bonds, and at least one metal chalcogenide compound disposed on said graphene sheets, wherein the chalcogen of said metal chalcogenide compound is selected from S, Se and Te. Also disclosed are methods for making and using the graphene-supported assembly, including graphene-supported MoS.sub.2. Monoliths with high surface area and conductivity can be achieved. Lower operating temperatures in some applications can be achieved. Pore size and volume can be tuned.

  7. Energy Department Seeks Public Comment on Standby Support Provisions of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Policy Act of 2005 | Department of Energy Public Comment on Standby Support Provisions of Energy Policy Act of 2005 Energy Department Seeks Public Comment on Standby Support Provisions of Energy Policy Act of 2005 November 17, 2005 - 2:49pm Addthis Workshop is first step to develop regulation for risk insurance for nuclear plants WASHINGTON, DC -- The U.S. Department of Energy (DOE) announced today that a workshop to receive public comments on the "standby support"

  8. Unified Resolve 2014: A Proof of Concept for Radiological Support...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    are presently referred to as "Radiological Operations Support Specialists (ROSS). The role of the ROSS cadre is envisioned to be an on-scene RN subject matter expert to Incident ...

  9. Exhibit A: Modeling in Support of Two Unit Operating Configurations...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Docket No. EO-05-01: Tables showing modeling of emissions from units of the Mirant Potomac Power Plant. PDF icon Exhibit A: Modeling in Support of Two Unit Operating Configurations ...

  10. Assess public and private sector capacity to support initiatives...

    Open Energy Info (EERE)

    public and private sector capacity to support initiatives 2.4. Assess and improve the national GHG inventory and other economic and resource data as needed for LEDS development...

  11. DOE Supports Renewable Energy Deployment Projects for Forest...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The project also supported the local economy, as Milwaukee-based Pieper Electric installed the system's solar panels that were manufactured by Milwaukee-based Helios USA, LLC. In ...

  12. Support mechanism for a mirrored surface or other arrangement

    DOE Patents [OSTI]

    Cutburth, Ronald W. (Tracy, CA)

    1987-01-01

    An adjustment mechanism such as a three point spherical mount for adjustably supporting a planer mirror or other type of arrangement relative to a plane defined by a given pair of intersecting perpendicular axes is disclosed herein. This mechanism includes first means for fixedly supporting the mirror or other arrangement such that the latter is positionable within the plane defined by the given pair of intersecting perpendicular axes. This latter means and the mirror or other such arrangement are supported by second means for limited movement back and forth about either of the intersecting axes. Moreover, this second means supports the first means and the mirror or other arrangement such that the latter is not movable in any other way whereby the point on the mirror or other arrangement coinciding with the intersection of the given axes does not move or float, thereby making the ability to adjust the mirror or other such arrangement more precise and accurate.

  13. DOE Awards Support Service Contract | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    EMCBC supported locations across the EM complex. The work to be performed under this basic contract includes, but is not limited to: Assist EM projects with Life Cycle Baseline...

  14. NIST Activities in Support of the Energy Independence and Security...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    provide 10% of our electricity by 2012 and 25% by 2025; and that 1 million Plug-In Hybrid cars are on the roads by 2015. PDF icon NIST Activities in Support of the Energy ...

  15. Contract Awarded to Small Business for Support Services

    Broader source: Energy.gov [DOE]

    Cincinnati - The Department of Energy (DOE) today awarded a contract to Boston Government Services, LLC; of Lenoir City, Tennessee, a small-disadvantaged business under the Small Business Administration’s 8(a) Program for support services.

  16. SUPPORT DEVICE FOR USE IN A NUCLEAR REACTOR

    DOE Patents [OSTI]

    Greenhalgh, F.G.; Long, E.

    1959-03-10

    A shock absorbing support device for fuel elements in a nuclear reactor is described. The device is adapted to support a column of moderator material on a lower support plate of a reactor structure and to axially locate the column of moderator with respect to the coolant fluid entry port in the support plate. Located centrally of the device is a vestically extending shaft member telescopingly engaged at its lower end with a tubular member and connected to the tubular member by a shear pin. Below the shear pin embedded in the end of the shaft member are blade members which are adapted to cut into the side of the tubular member in the went the shear pin is destroyed by the impact or a falling fuel element. The cutting action of the blades in the tube absorbes the shock of the fallen element.

  17. Carlsbad Field Office Nominated for Employer Support Freedom Award

    Broader source: Energy.gov [DOE]

    EM’s Carlsbad Field Office (CBFO) was honored at a recognition event in Santa Fe this month for being nominated for the 2014 Secretary of Defense Employer Support Freedom Award.

  18. Chemical mixing study for the Hanford TWRS Supporting facilities (U)

    SciTech Connect (OSTI)

    Heal, D.W.; Brantley, W.M.

    1996-09-03

    This Engineering Calculation addresses consequences of mixing any two hazardous chemicals contained in the same section of TWRS supporting facilities, as screened in accordance with `Westinghouse Savannah River Company Engineering and Construction Services Division Guidelines and Methods.`

  19. TWRS privatization support project waste characterization database development. Volume 2

    SciTech Connect (OSTI)

    Brevick, C.H.

    1995-11-01

    This appendix contains the radionuclide and chemical analyte subset data tables. These data tables contain all of the validated waste characterization information collected for the TWRS Privatization Support Project.

  20. Solid polymer electrolyte composite membrane comprising laser micromachined porous support

    DOE Patents [OSTI]

    Liu, Han; LaConti, Anthony B.; Mittelsteadt, Cortney K.; McCallum, Thomas J.

    2011-01-11

    A solid polymer electrolyte composite membrane and method of manufacturing the same. According to one embodiment, the composite membrane comprises a rigid, non-electrically-conducting support, the support preferably being a sheet of polyimide having a thickness of about 7.5 to 15 microns. The support has a plurality of cylindrical pores extending perpendicularly between opposing top and bottom surfaces of the support. The pores, which preferably have a diameter of about 5 microns, are made by laser micromachining and preferably are arranged in a defined pattern, for example, with fewer pores located in areas of high membrane stress and more pores located in areas of low membrane stress. The pores are filled with a first solid polymer electrolyte, such as a perfluorosulfonic acid (PFSA) polymer. A second solid polymer electrolyte, which may be the same as or different than the first solid polymer electrolyte, may be deposited over the top and/or bottom of the first solid polymer electrolyte.

  1. 2009-06 "Support for Innovative Approaches to Community Outreach...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2009-06 - July 29, 2009 More Documents & Publications NNMCAB Board Minutes: July 2009 Santa Fe 2009-09 "Support for Community Outreach on EM Education and Training Provided by ...

  2. Office of Environmental Protection, Sustainability Support, and Corporate Safety Analysis

    Broader source: Energy.gov [DOE]

    The Office of Environmental Protection, Sustainability Support and Analysis establishes environmental protection requirements and expectations for the Department to ensure protection of workers and the public and protection of the environment from the hazards associated with all Department operations.

  3. EIS-0471: Department of Energy Loan Guarantee to Support Proposed...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    in a rural area in western Bonneville County, Idaho. (DOE adopted this EIS issued by NRC on 04132007.) EIS-0471: Department of Energy Loan Guarantee to Support Proposed Eagle...

  4. Hyperspectral Mineral Mapping In Support Of Geothermal Exploration...

    Open Energy Info (EERE)

    Ca And Dixie Valley, Nv, Usa Jump to: navigation, search OpenEI Reference LibraryAdd to library Book: Hyperspectral Mineral Mapping In Support Of Geothermal Exploration- Examples...

  5. DOE-Supported Coal Cleaning Technology Succeeds in Commercial Demonstration

    Broader source: Energy.gov [DOE]

    A novel technology that could help release some of the currently unusable energy in an estimated 2 billion tons of U.S. coal waste has been successfully demonstrated by a Department of Energy supported project.

  6. Research Support Facility - Zero Energy Building Moves Closer to Reality

    SciTech Connect (OSTI)

    2010-04-01

    The DOE's Research Support Facility showcases high-performance design features, passive energy strategies, and renewable energy. It is a prototype for future large-scale net-zero energy buildings.

  7. InfoDev Incubator Support Center | Open Energy Information

    Open Energy Info (EERE)

    (infoDev) Topics: Implementation, Background analysis Website: www.idisc.netenindex.html References: idisc infoDev Incubator Support Center 1 "The iDISC Global Network of...

  8. Enhancing Amine-Supported Materials for Ambient Air Capture ...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Enhancing Amine-Supported Materials for Ambient Air Capture Previous Next List Julian P. Sculley, Hong-Cai Zhou, Angew. Chem. Int. Ed., 51, 12660-12661 (2012) DOI: 10.1002...

  9. Unique advantages of organometallic supporting ligands for uranium complexes

    SciTech Connect (OSTI)

    Diaconescu, Paula L.; Garcia, Evan

    2014-05-31

    The objective of our research project was to study the reactivity of uranium complexes supported by ferrocene-based ligands. In addition, this research provides training of graduate students as the next generation of actinide scientists.

  10. FACT SHEET: Draft Advanced Fossil Energy Solicitation to Support...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Gas and Other Pollution July 2, 2013 - 12:16pm Addthis What are the key facts? This solicitation will support projects that avoid, reduce, or sequester air pollutants or ...

  11. National Renewable Energy Laboratory Seeks Intern to Support Tribal Work

    Broader source: Energy.gov [DOE]

    The National Renewable Energy Laboratory (NREL) is accepting applications for a year-round student internship supporting the laboratory’s work to foster clean energy development on tribal lands.

  12. Carbon-Based and Carbon-Supported Heterogeneous Catalysts for...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Carbon-Based and Carbon-Supported Heterogeneous Catalysts for the Conversion of Biomass Carbon-based heterogeneous catalysts play a central role in the conversion of biomass to...

  13. Appendix E Supporting Information for Ground Water Modeling

    Office of Legacy Management (LM)

    Supporting Information for Ground Water Modeling This page intentionally left blank Contents Section Geologic Map of Site Area ........................................................................................................ E1.O Stream Flow Measurements ...................................................................................................... E2.0 Estimates of Ground Water Flow .............................................................................................. E3.0

  14. Climate Rapid Overview and Decision Support (C-ROADS) Simulator...

    Open Energy Info (EERE)

    Climate Rapid Overview and Decision Support (C-ROADS) Simulator1 Related Tools Gold Standard Program Model CRiSTAL VS Ex Ante Appraisal Carbon-Balance Tool (EX-ACT) ......

  15. Energy Signal Tool for Decision Support in Building Energy Systems...

    Office of Scientific and Technical Information (OSTI)

    Signal Tool for Decision Support in Building Energy Systems Henze, G. P.; Pavlak, G. S.; Florita, A. R.; Dodier, R. H.; Hirsch, A. I. 32 ENERGY CONSERVATION, CONSUMPTION, AND...

  16. Audit of Controls Over the ADP Support Services Contract, CR...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AUDIT OF CONTROLS OVER THE ADP SUPPORT SERVICES CONTRACT The Office of Inspector General wants to make the distribution of its reports as customer friendly and cost effective as ...

  17. Commercial-Grade, Scalable Support and Training Services Platform |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Commercial-Grade, Scalable Support and Training Services Platform Commercial-Grade, Scalable Support and Training Services Platform Lead Performer: Big Ladder Software - Denver, CO DOE Funding: $149,554 Cost Share: N/A Project Term: June 2014 - March 2015 Funding Opportunity: Small Business Innovation Research FY 2014 Phase 1 Release 2 Awards Project Objective The Department of Energy has funded the development of two industry-leading simulation engines, EnergyPlus and

  18. Conditional Loan Guarantee to Support California Solar Generation Project |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Conditional Loan Guarantee to Support California Solar Generation Project Conditional Loan Guarantee to Support California Solar Generation Project April 12, 2011 - 3:08pm Addthis An artist rendering of what the California Valley Solar Ranch project will look like post-construction . | courtesy of SunPower Corporation An artist rendering of what the California Valley Solar Ranch project will look like post-construction . | courtesy of SunPower Corporation Ginny Simmons

  19. Contract Awarded for Technical Support at Department of Energy Separations

    Energy Savers [EERE]

    Process Research Unit | Department of Energy Technical Support at Department of Energy Separations Process Research Unit Contract Awarded for Technical Support at Department of Energy Separations Process Research Unit March 8, 2016 - 3:00pm Addthis Media Contact Lynette Chafin 513-246-0461 Lynette.Chafin@emcbc.doe.gov Cincinnati - The Department of Energy (DOE) today announced the award of a Time and Materials Task Order off an Indefinite Delivery/Indefinite Quantity (IDIQ) contract to SUNSi

  20. DOE and the Department of Transportation Announce Collaboration to Support

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Smart Transportation Systems and Alternative Fuel Technologies | Department of Energy and the Department of Transportation Announce Collaboration to Support Smart Transportation Systems and Alternative Fuel Technologies DOE and the Department of Transportation Announce Collaboration to Support Smart Transportation Systems and Alternative Fuel Technologies April 29, 2016 - 4:00pm Addthis The U.S. Department of Energy (DOE) and the U.S. Department of Transportation (DOT) announced a