Powered by Deep Web Technologies
Note: This page contains sample records for the topic "joint implementation kyoto" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

A differential game of joint implementation of environmental projects  

Science Journals Connector (OSTI)

This paper proposes a two-player, finite-horizon differential game model to analyze joint implementation in environmental projects, one of the flexible mechanisms considered in the Kyoto Protocol. Our results show that allowing for foreign investments ... Keywords: Differential games, Environment, Joint implementation

MichèLe Breton; Georges Zaccour; Mehdi Zahaf

2005-10-01T23:59:59.000Z

2

The cost efficiency of Kyoto flexible mechanisms: a top-down study with the GEM-E3 world model  

Science Journals Connector (OSTI)

Among Kyoto flexible mechanisms, emission trading (ET) shows more promise in cost efficiency but less flexibility in practice than Joint Implementation (JI) and the Clean Development Mechanism (CDM). The problem draws our attention to whether JI and ... Keywords: C68, Clean Development Mechanisms, Cost efficiency, Emission trading, Joint Implementation, Q43, Q48

Haoran Pan

2005-11-01T23:59:59.000Z

3

The institutional needs of joint implementation projects  

SciTech Connect

In this paper, the authors discuss options for developing institutions for joint implementation (JI) projects. They focus on the tasks which are unique to JI projects or require additional institutional needs--accepting the project by the host and investor countries and assessing the project`s greenhouse gas (GHG) emission reduction or sequestration--and they suggest the types of institutions that would enhance their performance. The evaluation is based on four sets of governmental and international criteria for JI projects, the experiences of ten pilot JI projects, and the perspectives of seven collaborating authors from China, Egypt, India, Mexico, and Thailand, who interviewed relevant government and non-government staff involved in JI issue assessment in their countries. After examining the roles for potential JI institutions, they present early findings arguing for a decentralized national JI structure, which includes: (1) national governmental panels providing host country acceptance of proposed JI projects; (2) project parties providing the assessment data on the GHG reduction or sequestration for the projects; (3) technical experts calculating these GHG flows; (4) certified verification teams checking the GHG calculations; and (5) members of an international JI Secretariat training and certifying the assessors, as well as resolving challenges to the verifications. 86 refs.

Watt, E.; Sathaye, J. [Lawrence Berkeley Lab., CA (United States); Buen, O. de; Masera, O. [National Univ. of Mexico, Mexico City (Mexico); Gelil, I.A. [Organization of Energy Conservation and Planning, Cairo (Egypt); Ravindranath, N.H. [Indian Inst. of Science, Bangalore (India); Zhou, D.; Li, J. [Energy Research Inst., Beijing (China); Intarapravich, D. [Thailand Environmental Inst., Bangkok (Thailand)

1995-10-21T23:59:59.000Z

4

E-Print Network 3.0 - applications kyoto japan Sample Search...  

NLE Websites -- All DOE Office Websites (Extended Search)

kyoto japan Search Powered by Explorit Topic List Advanced Search Sample search results for: applications kyoto japan Page: << < 1 2 3 4 5 > >> 1 Japan-Taiwan Joint...

5

Mexico joins the venture: Joint Implementation and Greenhouse Gas Emissions  

SciTech Connect

Joint Implementation (JI) and its pilot phase of Activities Implemented Jointly (AIJ) are envisioned as an economic way of reducing global emissions of greenhouse gases. This paper draws upon the Mexican experience with AIJ to identify Mexican concerns with AIJ/JI and proposed solutions to these. Three approved Mexican AIJ projects (Ilumex, Scolel Te, and Salicornia) are described in detail. The Ilurnex project promotes the use of compact fluorescent lamps in Mexican homes of the States of Jalisco and Nuevo Leon, to reduce electric demand. Scolel Te is a sustainable forest management project in Chiapas. Salicornia examines the potential for carbon sequestration with a Halophyte-based crop irrigated with saline waters in Sonora. These three projects are reviewed to clarify the issues and concerns that Mexico has with AIJ and JI and propose measures to deal with them. These initial Mexican AIJ projects show that there is a need for creation of standard project evaluation procedures, and criteria and institutions to oversee project design, selection, and implementation. Further JI development will be facilitated by national and international clarification of key issues such as additionality criteria, carbon-credit sharing, and valuation of non-GHG environmental and/or social benefits and impacts for AIJ projects. Mexico is concerned that JI funding could negatively impact official development assistance or that OECD countries will use JI to avoid taking significant GHG mitigation actions in their own countries. The lack of carbon credit trading in the AIJ stage must be removed to provide useful experience on how to share carbon credits. National or international guidelines are needed to ensure that a portion of the carbon credits is allocated to Mexico.

Imaz, M.; Gay, C.; Friedmann, R.; Goldberg, B.

1998-11-01T23:59:59.000Z

6

Kyoto's Unfinished Business  

E-Print Network (OSTI)

The authors offer a provisional assessment of where the Kyoto negotiations have left the climate change issue. They present a few widely divergent assesments of what the Kyoto Protocol on Climate Change will accomplish, ...

Jacoby, Henry D.; Prinn, Ronald G.; Schmalensee, Richard.

7

Why Joint Implementation Can Boost Demand Side Management in Developing Countries  

Science Journals Connector (OSTI)

In this chapter Joint Implementation will be discussed from a business perspective. In particular, the focus will be on the potential role JI can play in further developing Demand Side Management (DSM) in develop...

Wim Wilms

1995-01-01T23:59:59.000Z

8

Southeast Asia and Kyoto University  

E-Print Network (OSTI)

, Kyoto University opened its ASEAN Center in Bangkok, Thailand (p.11), the latest development in over

Takada, Shoji

9

Joint energy and reserve markets: Current implementations and modeling trends  

Science Journals Connector (OSTI)

Abstract The continuous penetration of intermittent technologies is gradually reinforcing the technical and economic importance of electricity ancillary services, which are responsible for guaranteeing the reliability and security of the power systems. Generation companies’, regulating entities, system operators and other institutions (such as researchers on these fields) are more and more concerned on using market models to forecast most relevant outcomes for particular markets (such as energy and reserves cleared quantities and prices), under different simulation scenarios (such as costs or demand) and under different markets structures (such as more competitive or more oligopolistic). This paper reviews most energy and reserve markets implementations (mainly focusing on reserve types and dispatching methods), and discusses different approaches to model them. A theoretical equilibrium model for energy and reserve markets is also proposed.

Pablo González; José Villar; Cristian A. Díaz; Fco Alberto Campos

2014-01-01T23:59:59.000Z

10

kyoto1.htm  

Gasoline and Diesel Fuel Update (EIA)

THE COMMITTEE ON SCIENCE THE COMMITTEE ON SCIENCE U.S. HOUSE OF REPRESENTATIVES OCTOBER 9, 1998 At the request of the House of Representatives' Committee on Science, the Energy Information Administration has completed a detailed study of the potential, carbon-related impacts of the Kyoto Protocol on the price of energy in the United States and on the overall economy. The uncertainties involved in such an analysis are many, not the least of which is ambiguity about how much carbon emissions from energy use would actually have to be reduced in the United States versus how much of the Kyoto Protocol requirement could be met by other factors, such as reduced emissions from other greenhouse gases and international emissions trading. For this reason, further studies will clearly be needed.

11

Kyoto Protocol | Open Energy Information  

Open Energy Info (EERE)

Kyoto Protocol Kyoto Protocol Jump to: navigation, search http://www.wired.com/thisdayintech/tag/climate-change/ Kyoto protocol negotiation The Kyoto Protocol, negotiated in 1997 and into force in 2005, is a binding agreement in which industrialized nations will seek emission-reducing strategies for the future years to come. "The Kyoto Protocol is a legally binding agreement under which industrialized countries will reduce their collective emissions of greenhouse gases by 5.2% compared to the year 1990 (but note that, compared to the emissions levels that would be expected by 2010 without the Protocol, this target represents a 29% cut). The goal is to lower overall emissions from six greenhouse gases - carbon dioxide, methane, nitrous oxide, sulfur hexafluoride, HFCs, and PFCs - calculated as an average over

12

DOE and FERC Jointly Submit Implementation Proposal for The National Action Plan on Demand Response to Congress  

Energy.gov (U.S. Department of Energy (DOE))

The U.S. Department of Energy and the Federal Energy Regulatory Commission (FERC) jointly submitted to Congress a required “Implementation Proposal for The National Action Plan on Demand Response.”

13

Perspectives on the institutional needs of joint implementation projects for China, Egypt, India, Mexico, and Thailand  

SciTech Connect

One avenue for reducing the net emissions of greenhouse gases (GHG) under the Framework Convention on Climate Change (FCCC) is the joint implementation (JI) of policies and projects to the Convention. Although debate on the practical aspects of JI projects is relatively young, it already includes issues concerning the ability of governments to accept JI projects as well as the project participants` capacity to monitor, evaluate, and verify the financial and GHG benefits. The focus of this paper is an in-depth, country-by-country analysis of current and conceivable institutions in potential host countries. To understand these concerns better, in August 1994 the authors asked colleagues in five developing countries to evaluate their countries` institutional capacity for JI projects. Their perspectives are presented here as individual country case studies. The five countries--Mexico, Egypt, Thailand, India, and China--were chosen because each has significant potential for JI projects.

Mabel, M.; Watt, E.; Sathaye, J. [eds.] [and others

1995-10-01T23:59:59.000Z

14

Carbon Sequestered, Carbon Displaced and the Kyoto Context  

SciTech Connect

The integrated system that embraces forest management, forest products, and land-use change impacts the global carbon cycle - and hence the net emission of the greenhouse gas carbon dioxide - in four fundamental ways. Carbon is stored in living and dead biomass, carbon is stored in wood products and landfills, forest products substitute in the market place for products made from other materials, and forest harvests can be used wholly or partially to displace fossil fuels in the energy sector. Implementation of the Kyoto Protocol to the United Nations Framework Convention on Climate Change would result in the creation of international markets for carbon dioxide emissions credits, but the current Kyoto text does not treat all carbon identically. We have developed a carbon accounting model, GORCAM, to examine a variety of scenarios for land management and the production of forest products. In this paper we explore, for two simple scenarios of forest management, the carbon flows that occur and how these might be accounted for under the Kyoto text. The Kyoto protocol raises questions about what activities can result in emissions credits, which carbon reservoirs will be counted, who will receive the credits, and how much credit will be available? The Kyoto Protocol would sometimes give credits for carbon sequestered, but it would always give credits when fossil-fuel carbon dioxide emissions are displaced.

Marland, G.; Schlamadinger, B.

1999-04-18T23:59:59.000Z

15

A game of climate chicken : can EPA regulate greenhouse gases before the U.S. Senate ratifies the Kyoto Protocol?  

E-Print Network (OSTI)

EPA's legal authority to regulate greenhouse gas emissions under the Clean Air Act is reviewed. While EPA clearly does not have the authority to implement the precise terms of the Kyoto Protocol, arguments could be put ...

Bugnion, Véronique.; Reiner, David M.

16

Activities implemented jointly: First report to the Secretariat of the United Nations Framework Convention on Climate Change. Accomplishments and descriptions of projects accepted under the U.S. Initiative on Joint Implementation  

SciTech Connect

More than 150 countries are now Party to the United Nations Framework Convention on Climate Change (FCCC), which seeks, as its ultimate objective, to stabilize atmospheric concentrations of greenhouse gases at a level that would prevent dangerous human interference with the climate system. As a step toward this goal, all Parties are to take measures to mitigate climate change and to promote and cooperate in the development and diffusion of technologies and practices that control or reduce emissions and enhance sinks of greenhouse gases. In the US view, efforts between countries or entities within them to reduce net greenhouse gas emissions undertaken cooperatively--called joint implementation (JI)--holds significant potential both for combating the threat of global warming and for promoting sustainable development. To develop and operationalize the JI concept, the US launched its Initiative on Joint Implementation (USIJI) in October 1993, and designed the program to attract private sector resources and to encourage the diffusion of innovative technologies to mitigate climate change. The USIJI provides a mechanism for investments by US entities in projects to reduce greenhouse gas emissions worldwide and has developed a set of criteria for evaluating proposed projects for their potential to reduce net GHG emissions.

NONE

1996-07-01T23:59:59.000Z

17

Kyoto Protocol Response (Alabama) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Kyoto Protocol Response (Alabama) Kyoto Protocol Response (Alabama) Kyoto Protocol Response (Alabama) < Back Eligibility Commercial Developer Fed. Government Industrial Local Government Program Info State Alabama Program Type Climate Policies Environmental Regulations Effective immediately, the Director of the Alabama Department of Environmental Management shall refrain from proposing or promulgating any new regulations intended in whole or in part to reduce emissions of greenhouse gases, as such gases are defined by the Kyoto Protocol, from the residential, commercial, industrial, electric utility, or transportation sectors unless such reductions are required under existing statutes. In the absence of a resolution or other act of the Legislature of the State of Alabama approving same, the Director of the Alabama Department of

18

The Kyoto Protocol and developing countries  

E-Print Network (OSTI)

Under the Kyoto Protocol, the world's wealthier countries assumed binding commitments to reduce greenhouse gas emissions. The agreement requires these countries to consider ways to minimize adverse effects on developing ...

Babiker, Mustafa H.M.; Reilly, John M.; Jacoby, Henry D.

19

Japanese nuclear power and the Kyoto agreement  

E-Print Network (OSTI)

We find that, on an economic basis, nuclear power could make a substantial contribution for meeting the emissions target Japan agreed to in the Kyoto Protocol. It is unlikely however that the contribution would be as large ...

Babiker, Mustafa H.M.; Reilly, John M.; Ellerman, A. Denny.

20

The Kyoto Protocol: A business perspective  

SciTech Connect

Governments have made a tentative start in responding to climate change. In marathon negotiating sessions that extended into an extra day Dec. 1--11 in Kyoto, Japan, representatives from more than 160 governments hammered out the Kyoto Protocol to the United Nations Framework Convention on Climate Change (FCCC). The protocol calls for developed countries to reduce emissions of greenhouse gases (GHGs) on averaged by 5.2% below 1990 levels by the years 2008--2012. Developing countries have no new obligations. The paper discusses the agreement, ratification, future questions, business role, and the challenge.

Malin, C.B. [International Chamber of Commerce, Paris (France)

1998-01-19T23:59:59.000Z

Note: This page contains sample records for the topic "joint implementation kyoto" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Post-Kyoto GHG-Offset Project Eligibility Criteria  

Science Journals Connector (OSTI)

A major question that was addressed in COP15 (Copenhagen) concerns which institutional changes are recommended for the Kyoto flexible mechanisms in the post-Kyoto regime. The Clean Development Mechanism (CDM) has...

Brian Robertson

2011-01-01T23:59:59.000Z

22

Special Features: Kyoto University with ASEAN and Beyond  

E-Print Network (OSTI)

Special Features: Kyoto University with ASEAN and Beyond Kyoto University Vol.4 No.2 September 2014 #12;Contents 1 Message from the President Kyoto University with ASEAN and Beyond 2 History Southeast in ASEAN Region 22 Fostering the Next Generation -- The Hakubi Project A Unique Opportunity

Takada, Shoji

23

Russia's role in the Kyoto Protocol  

E-Print Network (OSTI)

As a result of the allocation of emissions reductions, and the differential willingness of countries to ratify, it turns out that Russia is a central player in the Kyoto Protocol. With the U.S. out and Japan and the EU ...

Bernard, Alain.

24

UNFINISHED BUSINESS: The Economics of The Kyoto Protocol  

SciTech Connect

The Kyoto Protocol to the Framework Convention on Climate Change (FCCC) was completed on the morning of December 11, 1997, following over two years of negotiations. The product of these deliberations is a complex and incomplete document knitting together the diversity of interests and perspectives represented by the more than 150 delegations. Because the document is complex, its implications are not immediately obvious. If it enters into force, the Kyoto Protocol will have far-reaching implications for all nations--both nations with obligations under the Protocol and those without obligations. National energy systems, and the world's energy system, could be forever changed. In this paper the authors develop an assessment of the energy and economic implications of achieving the goals of the Kyoto Protocol. They find that many of the details of the Protocol that remain to be worked out introduce critical uncertainties affecting the cost of compliance. There are also a variety of uncertainties that further complicate the analysis. These include future non-CO{sub 2} greenhouse gas emissions and the cost of their mitigation. Other uncertainties include the resolution of negotiations to establish rules for determining and allocating land-use emissions rights, mechanisms for Annex 1 trading, and participation by non-Annex 1 members in the Clean Development Mechanism. In addition, there are economic uncertainties, such as the behavior of Eastern Europe and the former Soviet Union in supplying emissions credits under Annex 1 trading. These uncertainties in turn could affect private sector investments in anticipation of the Protocol's entrance into force. The longer the nature of future obligations remains unclear, the less able decision makers will be to incorporate these rules into their investment decisions. They find that the cost of implementing the Protocol in the US can vary by more than an order of magnitude. The marginal cost could be as low as $26 per tonne of carbon if a global system of emissions mitigation could be quickly and effectively implemented. But it could also exceed $250 per tonne of carbon if the US must meet its emissions limitations entirely through domestic actions, and if mitigation obligations are not adequately anticipated by decision-makers.

JA Edmonds; CN MacCracken; RD Sands; SH Kim

2000-07-06T23:59:59.000Z

25

Carbon Sequestration, Soil Conservation, and the Kyoto Protocol: Summary of Implications  

Science Journals Connector (OSTI)

This paper discusses relationships between soil conservation, carbon sequestration, and the Kyoto Protocol. The Kyoto ... particularly true for soil conservation, where the sequestration of carbon above and below...

Julian Dumanski

2004-08-01T23:59:59.000Z

26

E-Print Network 3.0 - advanced applications kyoto Sample Search...  

NLE Websites -- All DOE Office Websites (Extended Search)

index.html Summary: Kyoto University of Foreign Studies (KUFS): http... that of Japan and other Asian countries. Exchange stu- dents studying at the Kyoto University of...

27

Kyoto Protocol: Enforcement Prohibitions (West Virginia) | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Kyoto Protocol: Enforcement Prohibitions (West Virginia) Kyoto Protocol: Enforcement Prohibitions (West Virginia) Kyoto Protocol: Enforcement Prohibitions (West Virginia) < Back Eligibility Utility Fed. Government Commercial Agricultural Investor-Owned Utility State/Provincial Govt Industrial Construction Municipal/Public Utility Local Government Residential Installer/Contractor Rural Electric Cooperative Tribal Government Low-Income Residential Schools Retail Supplier Institutional Multi-Family Residential Systems Integrator Fuel Distributor Nonprofit General Public/Consumer Transportation Program Info State West Virginia Program Type Climate Policies The West Virginia division of environmental protection shall refrain from proposing or promulgating any new rule intended, in whole or in part, to reduce emissions of greenhouse gases from the residential, commercial,

28

Greetings from Kyoto-U SPRING 2010 C O N T E N T S  

E-Print Network (OSTI)

signed with the ASEAN University Network (AUN) Foreign language Publication of "MANGA Kyoto University" 8

Takada, Shoji

29

Cubing the Kyoto Protocol: Post-Copenhagen Regulatory Reforms to Reset the Global Thermostat  

E-Print Network (OSTI)

renewable energy. Instead, the Kyoto Protocol CDM process encourages carbon reduction in developing countries,

Ferrey, Steven

2010-01-01T23:59:59.000Z

30

MIT Joint Program on the Science and Policy of Global Change  

E-Print Network (OSTI)

The Kyoto Protocol and Developing Countries Mustafa Babiker, John M. Reilly and Henry D. Jacoby Report No-profit organizations. To inform processes of policy development and implementation, climate change research needs://web.mit.edu/globalchange/www/ Printed on recycled paper #12;The Kyoto Protocol and Developing Countries Mustafa Babiker, John M. Reilly

31

Kyoto Protocol Act of 1998 (Illinois) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Kyoto Protocol Act of 1998 (Illinois) Kyoto Protocol Act of 1998 (Illinois) Kyoto Protocol Act of 1998 (Illinois) < Back Eligibility State/Provincial Govt Savings Category Alternative Fuel Vehicles Hydrogen & Fuel Cells Buying & Making Electricity Water Home Weatherization Solar Program Info State Illinois Program Type Climate Policies Environmental Regulations Provider Illinois Pollution Control Board Effective immediately, the Illinois Environmental Protection Agency and the Pollution Control Board shall not propose or adopt any new rule for the intended purpose of addressing the adverse effects of climate change which in whole or in part reduces emissions of greenhouse gases, as those gases are defined by the Kyoto Protocol, from the residential, commercial, industrial, electric utility, or transportation sectors. In the absence of

32

Kyoto-Related Fossil-Fuel CO2 Emission Totals  

NLE Websites -- All DOE Office Websites (Extended Search)

Kyoto-Related Emissions Kyoto-Related Emissions Kyoto-Related Fossil-Fuel CO2 Emission Totals DOI: 10.3334/CDIAC/ffe.007_V2012 world map Kyoto-Related Fossil-Fuel CO2 Emission Totals Year Annex B Countries Non Annex B Countries Fossil-Fuel CO2 Emissions (million metric tonnes C) Bunkers (million metric tonnes C) Fossil-Fuel CO2 Emissions (million metric tonnes C) Bunkers (million metric tonnes C) 1990 3894 90 2111 46 1991 3801 94 2299 38 1992 3750 109 2263 44 1993 3685 107 2339 48 1994 3656 107 2469 54 1995 3681 110 2570 59 1996 3704 111 2657 72 1997 3727 114 2737 74 1998 3746 118 2698 82 1999 3678 124 2718 90 2000 3725 130 2821 90 2001 3781 120 2936 92 2002 3764 128 3013 94 2003 3853 123 3347 98 2004 3888 135 3683 107 2005 3933 142 3926 106

33

Carbon emissions and the Kyoto commitment in the European Union  

E-Print Network (OSTI)

We estimate reference CO? emission projections in the European Union, and quantify the economic impacts of the Kyoto commitment on Member States. We consider the case where each EU member individually meets a CO? emissions ...

Viguier, Laurent L.; Babiker, Mustafa H.M.; Reilly, John M.

34

The effect of the Kyoto Protocol on carbon dioxide emissions  

Science Journals Connector (OSTI)

In this paper, we investigate the impact of the Kyoto Protocol on world emissions of a greenhouse gas, carbon dioxide. We use a large unbalanced panel data ... the effects of the international agreement. While carbon

Risa Kumazawa; Michael S. Callaghan

2012-01-01T23:59:59.000Z

35

Implementation Implementation  

E-Print Network (OSTI)

The SLP System: An Implementation of Super Logic Programs 1 The SLP System: An Implementation.09.2002 The SLP System: An Implementation of Super Logic Programs 4 SLP Interpreter (1) Negation Semantics Brass Dagstuhl, 16.09.2002 #12; The SLP System: An Implementation of Super Logic Programs 5 SLP

Brass, Stefan

36

Implementation Implementation  

E-Print Network (OSTI)

The SLP System: An Implementation of Super Logic Programs 1 The SLP System: An Implementation: An Implementation of Super Logic Programs 2 Super Logic Programs (1) #15; Arbitrarily nested propositional: An Implementation of Super Logic Programs 3 Super Logic Programs (2) #15; Default negation can be used only

Brass, Stefan

37

Carbon sinks and emissions trading under the Kyoto Protocol: a legal analysis  

Science Journals Connector (OSTI)

...Saunders Carbon sinks and emissions trading under the Kyoto Protocol: a...the issues of carbon sinks and emissions trading nearly aborted the Kyoto Protocol...third flexibility mechanism, emissions trading, compounded the complexity...

2002-01-01T23:59:59.000Z

38

KYOTO UNIVERSITYKYOTO UNIVERSITY Handbook for International ResearchersHandbook for International Researchers  

E-Print Network (OSTI)

............................................. 16 Electricity Gas Water Trash Collection Opening an Account Cell Phones Recycle Flea Market Other City Driver's License Bicycles Road Restrictions 6. Education Education ............... 26 The International Center, Kyoto University Kyoto International Community House

Takada, Shoji

39

(mercury.yukawa.kyoto-u.ac.jp)ssh Permission denied (publickey).  

E-Print Network (OSTI)

SSH Q&A (mercury.yukawa.kyoto-u.ac.jp)ssh Permission denied (publickey). (1) ID ID ID (2) ssh -i () ssh -i $HOME/.ssh/id_yitp_rsa (UID)@mercury.yukawa.kyoto-u.ac.jp (3) (1)(2) Permission denied support@yukawa.kyoto-u.ac.jp (mercury

Shimizu, Akira

40

Kyoto University has launched a Japan-Thailand collaborative research  

E-Print Network (OSTI)

Kyoto University has launched a Japan-Thailand collaborative research project titled "Development of clean and efficient utilization of low rank coals and biomass by solvent treatment," supported biomass waste as well as low-rank coals into valuable products such as carbon fiber, biofuel, and high

Takada, Shoji

Note: This page contains sample records for the topic "joint implementation kyoto" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

News Letter Institute of Advanced Energy, Kyoto University  

E-Print Network (OSTI)

;"Energy Research Issue" The IAE has many groups researching various fields of energy related issues. Abstract definition of energy consists of two parts: Energy = Exergy +Anergy Exergy is a part of energyNews Letter Institute of Advanced Energy, Kyoto University ISSN 1342-3193 IAE-NL-2014 No.54 http

Takada, Shoji

42

News Letter Institute of Advanced Energy, Kyoto University  

E-Print Network (OSTI)

Materials Science Workshop" Institute of Advanced Energy, Kyoto University #12; 25 1 22 ASEAN 5 ASEANNational University of SingaporeChulalongkorn UniversityASEAN University Network AUN Nantana Gajaseni Institut Teknologi Bandung Akhmaloka Gajaseni "Student Mobility and ASEAN Credit Transfer System" Agreement

Takada, Shoji

43

Multi-Gas Assessment of the Kyoto Protocol John Reilly,*  

E-Print Network (OSTI)

Multi-Gas Assessment of the Kyoto Protocol John Reilly,* Ronald G. Prinn,* Jochen Harnisch,* Jean in the protocol appear to be an adequate representation of trace gas climatic effects. The principal reason for the success of this simplified GWP approach in our calculations is that the mix of gas emissions resulting

44

Energy Policy 31 (2003) 459481 The costs of the Kyoto Protocol in the European Union  

E-Print Network (OSTI)

``flexible mechanisms'' (emission trading, clean development mechanism, and Joint Implementation) in order emissions trading within the European Union'' that proposes to introduce in 2005 an EU trading system be implemented at national level: e.g., emissions trading systems are in the process of being established

45

Impacts of the Kyoto Protocol on Energy Markets and Economic Activity  

Reports and Publications (EIA)

Analyzes the impacts on the Kyoto Protocol on U.S. energy markets and the economy in the 2008-2012 time frame.

1998-01-01T23:59:59.000Z

46

A concrete roadmap toward a low-carbon society in case of Kyoto City  

Science Journals Connector (OSTI)

Although several central and local governments around the world have set long term low-carbon targets they do not always have concrete plans toward the goals. In order to reduce greenhouse gas(GHG) emission significantly various kinds of measures in various sectors will be required. Some measures reduce GHG emissions directly and are called “direct measures” in this study. To implement those direct measures by the target year indirect measures are also required such as economic incentives regulations and urban planning. This study proposes a method to develop a concrete long-term schedule of direct and indirect measures a “roadmap ” based on the idea of backcasting. To formulate the implementation of and relations between measures and to estimate the concrete schedule to achieve the targets we developed a model called “backcasting tool” (BCT). Given the information of measures including GHG emission reduction by measures required resource input and maximum total resource input and so on BCT estimates the progress of the measures from the current to the target year. The method was applied in Kyoto City with a low-carbon target 40% reduction in CO 2 emission from fossil fuel by 2030 compared with 1990. Using BCT we showed that a detailed schedule consists of about 100 measures classified into six fields. The result shows it is possible to achieve the target if all the measures both direct and indirect are implemented in time.

Kei Gomi; Yuki Ochi; Yuzuru Matsuoka

2010-01-01T23:59:59.000Z

47

NSF final project report planning and implementation of the U.S. Joint Global Ocean Flux Study (U.S. JGOFS)  

SciTech Connect

Conducted planning and implementation of ocean carbon dioxide hydrographic surveys ocean process studies, time-series studies of Bermuda and Hawaii, and sponsored scientific workshops for those activities.

Livingston, Hugh D.

1996-07-01T23:59:59.000Z

48

Kyoto: Think Global, Act Local (K:TGAL) | Open Energy Information  

Open Energy Info (EERE)

Kyoto: Think Global, Act Local (K:TGAL) Kyoto: Think Global, Act Local (K:TGAL) Jump to: navigation, search Name Kyoto: Think Global, Act Local (K:TGAL) Agency/Company /Organization Netherlands Development Cooperation Sector Land, Climate Topics GHG inventory Website http://www.communitycarbonfore Program Start 2003 Program End 2009 References K:TGAL[1] Kyoto: Think Global, Act Local (K:TGAL) Screenshot "Kyoto: Think Global, Act Local (K:TGAL) is a research and capacity building program, financed by the Netherlands Development Cooperation, it is investigating the possibilities and potential for Community Based Forest Management of existing natural forest to be included as an eligible carbon mitigation activity under international climate change agreements in the future, particularly under REDD policy. The program involves research teams

49

The role of the U.S. Clean Coal Technology Program in implementing the objectives of the joint Canada-U.S. acid rain mitigation initiative  

SciTech Connect

The Clean Coal Technology (CCT) Program was initiated by the US Department of Energy (DOE) in part as a response to the 1986 Joint Report of the US and Canadian Special Envoys on Acid Rain, with a particular focus on coal-burning electric power plants. The fist three solicitations of the CCT Program were aimed primarily at mitigating the potential impacts of acid rain. Subsequently, the Clean Air Act Amendments of 1990 established emission reduction targets for SO{sub 2} and No{sub x}, which influenced the goals of the last two CCT Program. This paper provides an overview of the CCT Program and reports the significant results, with emphasis on emissions reduction as well as their impact on ozone formation.

Baldwin, A.L.; Smith, D.N. [Dept. of Energy, Pittsburgh, PA (United States). Federal Energy Technology Center; Mann, A.W.; McIlvried, H.G.; Russell, D.L. Sr. [Burns and Roe Services Corp., Pittsburgh, PA (United States)

1997-12-31T23:59:59.000Z

50

Ceramic joints  

DOE Patents (OSTI)

Butt joints between materials having different coefficients of thermal expansion are prepared having a reduced probability of failure of stress facture. This is accomplished by narrowing/tapering the material having the lower coefficient of thermal expansion in a direction away from the joint interface and not joining the narrow-tapered surface to the material having the higher coefficient of thermal expansion.

Miller, Bradley J. (Worcester, MA); Patten, Jr., Donald O. (Sterling, MA)

1991-01-01T23:59:59.000Z

51

Final Report. SFAA No. DEFC02-98CH10961. Technical assistance for joint implementation and other supporting mechanisms and measures for greenhouse gas emissions mitigation  

SciTech Connect

IIEC, a division of CERF, has developed an extensive base of experience implementing activities that support climate action by developing USIJI projects in transitional countries within Asia, Latin America, Central and Eastern Europe, and southern Africa. IIEC has been able to provide a range of technical and policy assistance to governments and industry in support of sustainable energy use. IIEC continues to work in key countries with local partners to develop and implement energy efficiency policies and standards, develop site-specific projects, and assist governing bodies to establish national priorities and evaluation criteria for approving GHG-mitigation projects. As part of this project, IIEC focused on promoting a series of activities in Thailand and South Africa in order to identify GHG mitigation projects and work within the national approval process of those countries. The sections of this report outline the activities conducted in each country in order to achieve that goal.

Knight, Denise

2001-10-15T23:59:59.000Z

52

KYOTO UNIVERSITYKYOTO UNIVERSITY Handbook for International ResearchersHandbook for International Researchers  

E-Print Network (OSTI)

Electricity Gas Water Trash Collection Opening an Account Cell Phones Recycle Flea Market Interpretation ....................................... 35 Access to Kyoto Station from Kansai International Airport Access to Katsura Station from Kansai

Takada, Shoji

53

KYOTO UNIVERSITYKYOTO UNIVERSITY Handbook for International ResearchersHandbook for International Researchers  

E-Print Network (OSTI)

............................................. 16 Electricity Gas Water Trash Collection Opening an Account Cell Phones Recycle Flea Market ....................................... 35 Access to Kyoto Station from Kansai International Airport Access to Katsura Station from Kansai

Takada, Shoji

54

Joint Implementation Network Feed | Open Energy Information  

Open Energy Info (EERE)

Network Feed Network Feed Jump to: navigation, search Home | About | Inventory | Partnerships | Capacity Building | Webinars | Reports | Events | News | List Serve CLEAN Member Feeds Center for Environment and National Security at Scripps Centro de EnergĂ­as Renovables (CER) The Children's Investment Fund Foundation (CIFF) Climate and Development Knowledge Network (CDKN) Climate Technology Initiative (CTI) ClimateWorks Foundation Coalition for Rainforest Nations (CfRN) Ecofys Energy Research Centre of the Netherlands (ECN) Energy Sector Management Assistance Program of the World Bank (ESMAP) Environment and Development Action in the Third World (ENDA-TM) German Aerospace Center (DLR) German Agency for International Cooperation (GIZ) Global Village Energy Partnership (GVEP)

55

JointImplementationQuarterlyApril2012 Introduction  

E-Print Network (OSTI)

position paper prepared for COP-17 by the Center for Energy and Environmental Policy (CEEP; Newark, DE, USA, sustainable, and just. The current formulation of succes The shared belief in markets and the view possible, conducive to economic growth. To that end, the market-based`flexibility mechanisms' were

Delaware, University of

56

Joint Implementation Network (JIN) | Open Energy Information  

Open Energy Info (EERE)

knowledge centre for climate change policy issues in general and the concept of emissions trading in particular. During the first five years of its operation, JIN regularly...

57

NEPA Implementation | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Implementation Implementation NEPA Implementation Selected documents providing guidance on the implementation of NEPA. September 7, 2012 OMB and CEQ Joint Memorandum on Environmental Collaboration and Conflict Resolution This Office of Management and Budget (OMB) and Council on Environmental Quality (CEQ) joint memorandum expands and builds on the November 28, 2005, Environmental Conflict Resolution (ECR) Memorandum, directing departments and agencies to increase the appropriate and effective use of third-party assisted environmental collaboration as well as environmental conflict resolution to resolve problems and conflicts that arise in the context of environmental, public lands, or natural resources issues, including matters related to energy, transportation, and water and land management.

58

http://www.ms.u-tokyo.ac.jp/~yasuyuki/rims2011.htm April 1, 2011 March 31, 2012 RIMS, Kyoto University, Japan  

E-Print Network (OSTI)

University, Japan M. Izumi (Kyoto University),Y. Kawahigashi (University of Tokyo), H. Matui (Chiba) Organized by: September 5 - 9, 2011 (RIMS, Kyoto University, Japan) Invited Speakers: N. Brown, M. Dadarlat and Mathematical Physics December 7 - 16, 2011 (RIMS, Kyoto University, Japan) Invited Speakers: J. Cuntz, D

Kawahigashi, Yasuyuki

59

It's too late to seal a global climate deal. But we need action, not Kyoto II  

E-Print Network (OSTI)

to economic development, with development based on cleaner, sustainable technologies for power, transport, buildings and industry. The rich world will benefit as the poor world goes green, and will have to pay much wait It's too late to seal a global climate deal. But we need action, not Kyoto II |... http://www.guardian.co.uk/commentisfree/cif-green

60

On June 21, 2013, Kyoto University and Daikin Industries, Ltd. concluded a collaboration agreement  

E-Print Network (OSTI)

, and the pursuit of innovation. Under the agreement, the Daikin-Kyoto University Innovation Program (DK Program the following goals in three years. 1. Create new themes focusing on social values (drawing on the knowledge's partner universities) 3. Develop technology management methods (to continuously foster innovation

Takada, Shoji

Note: This page contains sample records for the topic "joint implementation kyoto" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Global Network Kyoto University has opened a new center in Bangkok, Thailand, dedicated to supporting research,  

E-Print Network (OSTI)

to supporting research, education, and international collaborations across the ASEAN region. To mark the launch of these activities, an official opening ceremony and a symposium titled "Kyoto University in ASEAN -- Past, Present, government, and industry from ASEAN member states and Japan convened at the opening ceremony

Takada, Shoji

62

Global warming mitigation and renewable energy policy development from the Kyoto Protocol to the Copenhagen Accord—A comment  

Science Journals Connector (OSTI)

Global warming is a grave environmental issue that has caught the attention of the globe. Due to the consequences of global warming, UNFCCC has established the Kyoto Protocol and the Copenhagen Accord as measures of combating climate change due to the emission of greenhouse gases. It has been three years since the first commitment period of the Kyoto Protocol and the Copenhagen Accord was just newly established. Therefore, there is a necessity to evaluate the performance of the Kyoto Protocol and to comment upon the Copenhagen Accord in its contributions toward climate change mitigation. Major greenhouse gas (GHG) emitters who are among the Kyoto Protocol ratifying developed nations exhibit the potential to achieve the desired Kyoto pledges through the aid of Clean Development Mechanisms (mainly from using renewable energy), as proposed in the Kyoto Protocol. However, the nullifying effects from non-ratified major emitters like the US and ratified but still developing countries have difficulties in adhering to the Kyoto Protocol. The Copenhagen Accord, on the other hand, is considered to be less ambitious and provides limited financial aid through the Copenhagen Green Climate Fund. The formulation of such a document indicates that modern societies continues to waste time in negotiations that emphasize on individual economic and political advantages, rather than taking into account true global considerations. It raises questions regarding how much time is needed before we decide to fully commit to the effective and collective efforts of climate change mitigation.

Lee Chung Lau; Keat Teong Lee; Abdul Rahman Mohamed

2012-01-01T23:59:59.000Z

63

The changing role of the project mechanisms in emissions trading  

Science Journals Connector (OSTI)

The perception of the project-based mechanisms has varied since their inception under the name of Activities Implemented Jointly (AIJ) to their form under the Kyoto Protocol of Joint Implementation (JI) and the C...

Katherine G. Begg

2006-01-01T23:59:59.000Z

64

Kyoto & Kyoto University Kyoto: A Heartland  

E-Print Network (OSTI)

. It was also where the first hydroelectric power plant and tram system were developed, and the location

Takada, Shoji

65

Butt Joint Tool Commissioning  

SciTech Connect

ITER Central Solenoid uses butt joints for connecting the pancakes in the CS module. The principles of the butt joining of the CICC were developed by the JAPT during CSMC project. The difference between the CSMC butt joint and the CS butt joint is that the CS butt joint is an in-line joint, while the CSMC is a double joint through a hairpin jumper. The CS butt joint has to carry the hoop load. The straight length of the joint is only 320 mm, and the vacuum chamber around the joint has to have a split in the clamp shell. These requirements are challenging. Fig.1 presents a CSMC joint, and Fig.2 shows a CS butt joint. The butt joint procedure was verified and demonstrated. The tool is capable of achieving all specified parameters. The vacuum in the end was a little higher than the target, which is not critical and readily correctable. We consider, tentatively that the procedure is established. Unexpectedly, we discover significant temperature nonuniformity in the joint cross section, which is not formally a violation of the specs, but is a point of concern. All testing parameters are recorded for QA purposes. We plan to modify the butt joining tool to improve its convenience of operation and provide all features necessary for production of butt joints by qualified personnel.

Martovetsky, N N

2007-12-06T23:59:59.000Z

66

Comments of the Joint Center for Political and Economic Studies |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Joint Center for Political and Economic Studies Joint Center for Political and Economic Studies Comments of the Joint Center for Political and Economic Studies The Media and Technology Institute and the Climate Change Initiative at the Joint Center for Political and Economic Studies ("Joint Center")1 respectfully submit these comments in response to the United States Department of Energy's ("DoE") Request for Information regarding its implementation of the Smart Grid provisions of Federal Communications Commission's ("FCC") National Broadband Plan. Comments of the Joint Center for Political and Economic Studies More Documents & Publications Re: NBP RFI: Data Access Implementing the National Broadband Plan by Empowering Consumers and the Smart Grid: Data Access, Third Party Use, and Privacy- Request for

67

Cost effective analysis comparing the small diameter bomb and the joint standoff weapon (A+ Variant) .  

E-Print Network (OSTI)

??This MBA project investigated and analyzed the cost effectiveness of implementing the Joint Standoff Weapon A+ (JSOW A+) variant versus the Small Diameter Bomb (SDB).… (more)

Stevens, Brett

2004-01-01T23:59:59.000Z

68

Kyoto Workshop  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Center for Reliable Electric Power Transmission Center for Reliable Electric Power Transmission Alan Mantooth, University of Arkansas 1 1 National Center for Reliable Electric Power Transmission A Center for Advanced Power Electronics Dr. H. Alan Mantooth, Director Dr. Simon Ang, Associate Director Dr. Juan Carlos Balda, Associate Director Dr. Roy McCann, Associate Director University of Arkansas - Fayetteville http://ncrept.eleg.uark.edu Silicon Carbide Research for Reliable Electric Power: Design and Test National Center for Reliable Electric Power Transmission Alan Mantooth, University of Arkansas 2 Research advanced power electronic solutions for grid- connected applications Fault currents continue to rise in urban centers and the use of FCLs provides an attractive way to extend the useful life of

69

Kyoto Workshop  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

of Arkansas 15 15 UA Proposed Solution Multiport converter topology uses common transformer, reducing part count for total system. High frequency transformer link results...

70

Impacts of the Kyoto protocol on U.S. energy markets and economic activity  

SciTech Connect

The Intergovernmental Panel on Climate Change (IPCC) was established by the World Meteorological Organization and the United Nations Environment Program in 1988 to assess the available scientific, technical, and socioeconomic information in the field of climate change. The most recent report of the IPCC concluded that ``Our ability to quantify the human influence on global climate is currently limited because the expected signal is still emerging from the noise of natural variability, and because there are uncertainties in key factors. These include the magnitudes and patterns of long-term variability and the time-evolving pattern of forcing by, and response to, changes in concentrations of greenhouse gases and aerosols, and land surface changes. Nevertheless the balance of evidence suggests that there is a discernible human influence on global climate. The first and second Conference of the Parties in 1995 and 1996 agreed to address the issue of greenhouse gas emissions for the period beyond 2000, and to negotiate quantified emission limitations and reductions for the third Conference of the Parties. On December 1 through 11, 1997, representatives from more than 160 countries met in Kyoto, Japan, to negotiate binding limits on greenhouse gas emissions for developed nations. The resulting Kyoto Protocol established emissions targets for each of the participating developed countries--the Annex 1 countries--relative to their 1990 emissions levels. 114 refs., 138 figs., 33 tabs.

NONE

1998-10-01T23:59:59.000Z

71

The road from Kyoto: The evolution of carbon dioxide emissions from energy use in IEA countries  

SciTech Connect

Building on earlier analysis of energy use and CO{sub 2} emissions in 13 member countries of the International Energy Agency (IEA), the authors quantify energy use and carbon emissions for nearly three dozen activities and economic branches from the early 1970s to the mid 1990s. They show how lifestyles, economic structure, and overall economic growth affect the structure and rate of CO{sub 2} emissions. Similarly they show how energy intensities, final fuel mixes, and utility fuel mixes shape emissions. Using Laspeyres indices, they calculate the relative importance of each of these factors in affecting sectoral and total emissions over time. They focus on consumer sectors, homes and personal travel, but extend the analysis to all sectors of the economies studied. The authors find that emissions reductions in all sectors after 1990 have been slower than in the previous fifteen years, a period that saw emissions reductions in spite of economic growth. Manufacturing and households led the reductions in most cases, but progress has slowed markedly. In almost all cases, emissions from the transportation sector showed the least reduction and indeed some increases. Findings do not give an optimistic view of the recently concluded accords at the Third Conference of Parties (COP-3) in Kyoto, Japan. The authors conclude that the current rate of energy saving and fuel switching must be greatly accelerated if the IEA countries studied here are to affect reductions in CO{sub 2} emissions to meet their Kyoto targets.

Schipper, L.; Unander, F.; Marie, C.; Gorham, R.; Justus, D.; Ting, M.; Khrushch, M.; Krackeler, T.

1998-07-01T23:59:59.000Z

72

Joint Environmental Management System (EMS) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Joint Environmental Management System (EMS) Joint Environmental Management System (EMS) Joint Environmental Management System (EMS) Joint Environmental Management System (EMS) The environmental management system (EMS) has two areas of focus: environmental compliance and environmental sustainability. The environmental compliance aspect of the EMS consists of regulatory compliance and monitoring programs that implement federal, state, local, and tribal requirements; agreements; and permits under the Legacy Management contract. The environmental sustainability aspect promotes and integrates sustainability initiatives such as energy and natural resource conservation, waste minimization, green construction, and use of eco-friendly products and services into all phases of work. U.S. Department of Energy (DOE) Office of Legacy Management (LM) EMS was

73

POST-KYOTO POLICY IMPLICATIONS ON THE ENERGY SYSTEM: A TIAM-FR LONG-TERM PLANNING EXERCISE  

E-Print Network (OSTI)

marginal costs, the primary energy consumption and the energy mix. This paper compares global efforts of CO. Keywords CO2 mitigation targets, global energy system, long-term modelling Acknowledgement This researchPOST-KYOTO POLICY IMPLICATIONS ON THE ENERGY SYSTEM: A TIAM-FR LONG-TERM PLANNING EXERCISE Sandrine

Paris-Sud XI, Université de

74

International Energy Conference, 19 -21 May 2003 Energy Technologies for post-Kyoto targets in the medium term  

E-Print Network (OSTI)

Aquifers and Hydrocarbon Structures Power & Heat Air Air O2 N2 & O2 CO2 CO2 CO2 Compression & DehydrationInternational Energy Conference, 19 - 21 May 2003 Energy Technologies for post-Kyoto targets in the medium term CO2 Capture & Geological Storage Niels Peter Christensen International Ventures Director

75

Analysis of the Impacts of an Early Start for Compliance with the Kyoto Protocol  

Gasoline and Diesel Fuel Update (EIA)

2 2 Analysis of the Impacts of an Early Start for Compliance with the Kyoto Protocol July 1999 Energy Information Administration Office of Integrated Analysis and Forecasting U.S. Department of Energy Washington, DC 20585 This report was prepared by the Energy Information Administration, the independent statistical and analytical agency within the Department of Energy. The information contained herein should be attributed to the Energy Information Administration and should not be construed as advocating or reflecting any policy position of the Department of Energy or of any other organization. Service Reports are prepared by the Energy Information Administration upon special request and are based on assumptions specified by the requester. Preface The analysis in this report was undertaken at the request of the Committee on Science of the U.S.

76

Cost saving in meeting the commitments of the Kyoto Protocol through the abatement of non-CO2 greenhouse gas emissions  

Science Journals Connector (OSTI)

Reduction of CO2 emissions has proved to he difficult in Finland and it is therefore essential to find the optimal allocation of reduction measures between different greenhouse gases mentioned in the Kyoto Protoc...

S. Tuhkanen; R. Pipatti

2000-01-01T23:59:59.000Z

77

Proactive DSA application and implementation  

SciTech Connect

Data authentication as provided by digital signatures is a well known technique for verifying data sent via untrusted network links. Recent work has extended digital signatures to allow jointly generated signatures using threshold techniques. In addition, new proactive mechanisms have been developed to protect the joint private key over long periods of time and to allow each of the parties involved to verify the actions of the other parties. In this paper, the authors describe an application in which proactive digital signature techniques are a particularly valuable tool. They describe the proactive DSA protocol and discuss the underlying software tools that they found valuable in developing an implementation. Finally, the authors briefly describe the protocol and note difficulties they experienced and continue to experience in implementing this complex cryptographic protocol.

Draelos, T.; Hamilton, V.; Istrail, G.

1998-05-03T23:59:59.000Z

78

High pressure ceramic joint  

DOE Patents (OSTI)

Many recuperators have components which react to corrosive gases and are used in applications where the donor fluid includes highly corrosive gases. These recuperators have suffered reduced life, increased service or maintenance, and resulted in increased cost. The present joint when used with recuperators increases the use of ceramic components which do not react to highly corrosive gases. Thus, the present joint used with the present recuperator increases the life, reduces the service and maintenance, and reduces the increased cost associated with corrosive action of components used to manufacture recuperators. The present joint is comprised of a first ceramic member, a second ceramic member, a mechanical locking device having a groove defined in one of the first ceramic member and the second ceramic member. The joint and the mechanical locking device is further comprised of a refractory material disposed in the groove and contacting the first ceramic member and the second ceramic member. The present joint mechanically provides a high strength load bearing joint having good thermal cycling characteristics, good resistance to a corrosive environment and good steady state strength at elevated temperatures.

Ward, Michael E. (Poway, CA); Harkins, Bruce D. (San Diego, CA)

1993-01-01T23:59:59.000Z

79

High pressure ceramic joint  

DOE Patents (OSTI)

Many recuperators have components which react to corrosive gases and are used in applications where the donor fluid includes highly corrosive gases. These recuperators have suffered reduced life, increased service or maintenance, and resulted in increased cost. The present joint when used with recuperators increases the use of ceramic components which do not react to highly corrosive gases. Thus, the present joint used with the present recuperator increases the life, reduces the service and maintenance, and reduces the increased cost associated with corrosive action of components used to manufacture recuperators. The present joint is comprised of a first ceramic member, a second ceramic member, a mechanical locking device having a groove defined in one of the first ceramic member and the second ceramic member. The joint and the mechanical locking device is further comprised of a refractory material disposed in the groove and contacting the first ceramic member and the second ceramic member. The present joint mechanically provides a high strength load bearing joint having good thermal cycling characteristics, good resistance to a corrosive environment and good steady state strength at elevated temperatures. 4 figures.

Ward, M.E.; Harkins, B.D.

1993-11-30T23:59:59.000Z

80

Joint Theory Institute  

NLE Websites -- All DOE Office Websites (Extended Search)

Program General Info Program General Info Registration Info Directions to Argonne Dynamics of Symmetry Breaking A Workshop sponsored by the ANL/UChicago Joint Theory Institute April 13-17, 2009 Argonne National Laboratory, IL The Joint Theory Institute (JTI) is a multi-disciplinary research institution jointly supported at the University of Chicago and Argonne National Laboratory to enhance collaborative research between both institutions in the broad area of theory. This year JTI sponsors a workshop the aim of which is to explore the dynamics of symmetry breaking in a broad range of systems from nuclear physics to string theory, using theoretical insights such as Dyson-Schwinger equations formalism, gauge/gravity duality and lattice QCD. We will focus on systems which exhibit dynamical symmetry breaking and will cover topics essential for understanding nonperturbative QCD and physics of quark-gluon plasma.

Note: This page contains sample records for the topic "joint implementation kyoto" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Weather and Joints  

NLE Websites -- All DOE Office Websites (Extended Search)

Weather and Joints Weather and Joints Name: Brittany Location: N/A Country: N/A Date: N/A Question: Why do people feel the weather changin in their joints? Is it just a superstition? Replies: People feel weather changes in their bodies because storm systems are accompanied by lower air pressure. When a storm system is approaching the barometric pressure or air pressure will drop. Inside the body is air pressure also. The pressure inside the body is approximately 15 lbs per square inch. Normal air pressure on the outside is approximately the same. When both numbers are equal most people don't feel anything. However, when the low pressure system approaches or the air pressure drops, the pressure on the inside of the body is greater than outside and that air on the inside tries to get out because air flows from high pressure to low pressure. This causes swelling and discomfort in some people's joints, especially in the elderly or people who have suffered injuries to those areas (those areas are weakened somewhat due to the injury and less resistant to the changes in pressure).

82

Preparing for Project Implementation Financing Project Implementation  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

for Project Implementation Financing Project Implementation Save Energy Now LEADER Web Conference Project Implementation Seminar Series Save Energy Now LEADER Web Conference...

83

Joint Outreach Task Group (JOTG) Calendar: June  

NLE Websites -- All DOE Office Websites (Extended Search)

Former Worker Program (FWP) Home Covered Sites/Populations â€ș Construction Worker Screening Projects â€ș Production Worker Screening Projects â€ș Supplemental Screening Program â€ș Beryllium Vendor Screening Program Upcoming Events Program Implementation Outreach Medical Screening - Conventional Medical Screening - Early Lung Cancer Detection Communicating Results Protecting Participant Information Sharing De-identified Data Chronic Beryllium Disease Awareness Joint Outreach Task Group (JOTG) Worker Testimonials Contact Us FWP Scientific Publications FWP Documents Related Links Office of Health and Safety Home Page HSS Logo Joint Outreach Task Group Calendar: June 2013 Sunday Monday Tuesday Wednesday Thursday Friday Saturday 26 27 28 29 30 31 1 2 3 4 FWP Event Mound Miamisburg, OH

84

RM-R-1197(EN) Joint Implementation,CleanDevelopment  

E-Print Network (OSTI)

influence the developing countries incentives to participate in the coalition of committed countries,....,, ,. .,; . #12;Contents Preface 6 1 The scope for JI, CDM and TP 7 1.1 Climate change and international co-operation 7 Climate change and emissions 7 Why international co-operation? 7 A major problem is incentives 9

85

US, Russian Federation Sign Joint Statement on Reactor Conversion |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

US, Russian Federation Sign Joint Statement on Reactor Conversion US, Russian Federation Sign Joint Statement on Reactor Conversion US, Russian Federation Sign Joint Statement on Reactor Conversion June 26, 2012 - 12:00pm Addthis News Media Contact (202) 586-4940 This release is cross-posted from NNSA.energy.gov. MOSCOW - The U.S. and Russian Federation jointly announced today that the first stage of work defined in the Implementing Agreement between the Russian State Corporation for Atomic Energy (Rosatom) and the Department of Energy (DOE) Regarding Cooperation in Concluding Feasibility Studies of the Conversion of Russian Research Reactors of Dec. 7, 2010, has been completed. The announcement comes at the close of the most recent session of the Working Group on Nuclear Energy and Nuclear Security under the U.S.-Russia bilateral Presidential Commission, co-chaired by Daniel

86

US, Russian Federation Sign Joint Statement on Reactor Conversion |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

US, Russian Federation Sign Joint Statement on Reactor Conversion US, Russian Federation Sign Joint Statement on Reactor Conversion US, Russian Federation Sign Joint Statement on Reactor Conversion June 26, 2012 - 12:00pm Addthis News Media Contact (202) 586-4940 This release is cross-posted from NNSA.energy.gov. MOSCOW - The U.S. and Russian Federation jointly announced today that the first stage of work defined in the Implementing Agreement between the Russian State Corporation for Atomic Energy (Rosatom) and the Department of Energy (DOE) Regarding Cooperation in Concluding Feasibility Studies of the Conversion of Russian Research Reactors of Dec. 7, 2010, has been completed. The announcement comes at the close of the most recent session of the Working Group on Nuclear Energy and Nuclear Security under the U.S.-Russia bilateral Presidential Commission, co-chaired by Daniel

87

Implementation of optimum solar electricity generating system  

Science Journals Connector (OSTI)

Under the 10th Malaysian Plan the government is expecting the renewable energy to contribute approximately 5.5% to the total electricity generation by the year 2015 which amounts to 98MW. One of the initiatives to ensure that the target is achievable was to establish the Sustainable Energy Development Authority of Malaysia. SEDA is given the authority to administer and manage the implementation of the feed-in tariff (FiT) mechanism which is mandated under the Renewable Energy Act 2011. The move to establish SEDA is commendable and the FiT seems to be attractive but there is a need to create awareness on the implementation of the solar electricity generating system (SEGS). In Malaysia harnessing technologies related to solar energy resources have great potential for implementation. However the main issue that plagues the implementation of SEGS is the intermittent nature of this source of energy. The availability of sunlight is during the day time and there is a need for electrical energy storage system so that there is electricity available during the night time as well. The meteorological condition such as clouds haze and pollution affects the SEGS as well. The PV based SEGS is seems to be promising electricity generating system that can contribute towards achieving the 5.5% target and will be able to minimize the negative effects of utilizing fossil fuels for electricity generation on the environment. Malaysia is committed to Kyoto Protocol which emphasizes on fighting global warming by achieving stabilization of greenhouse gas concentrations in the atmosphere at a level that would prevent dangerous anthropogenic interference with the climate system. In this paper the technical aspects of the implementation of optimum SEGS is discussed especially pertaining to the positioning of the PV panels.

2014-01-01T23:59:59.000Z

88

INL Joint Appointment Agreements The Joint Appointment Program...  

NLE Websites -- All DOE Office Websites (Extended Search)

at Idaho National Laboratory is designed to enhance research collaboration between INL and university staff. Joint appointees develop or conduct research and development at...

89

DOD-DOE Workshop on Joint Energy Activities  

SciTech Connect

The general conditions for DOD-DOE interactions were delineated in an October 1978, Memorandum of Understanding (MOU) that identified two basic goals: improving energy efficiency and availability within DOD, and utilizing DOD and DOE expertise and facilities to carry out projects of mutual interest. There has been considerable interaction between DOD and DOE, including a number of proposed joint initiatives but a systematic and coordinated approach for nurturing, maintaining, and expanding these relationships has not been developed. A DOD-DOE Workshop on Joint Energy Activities was held on March 10-12, 1980. The workshop was structured into five working groups - Mobility Fuels, Conservation, Fossil Fuels for Fixed Facilities, Solar and Renewable Energy Sources, and Special Projects - with DOD and DOE cochairmen for each. Over a hundred DOD and DOE management, program, and policymaking representatives were brought together by the workshop Steering Committee to identify specific programs for inclusion in an overall plan for implementing the MOU and to deal with fundamental issues and problems of maintaining future communications. The workshop accomplished its goals, these being to: (1) improve communication among the appropriate key DOD and DOE personnel at all levels and promote information exchange; (2) review ongoing and already-proposed joint DOD and DOE programs; (3) initiate a coordinated, systematic effort to establish joint DOD-DOE energy-security programs; and (4) propose specific programs and projects of mutual interest for inclusion in a follow-on joint-implementation plan.

None

1980-01-01T23:59:59.000Z

90

Metal to ceramic sealed joint  

DOE Patents (OSTI)

A metal to ceramic sealed joint which can withstand wide variations in temperature and maintain a good seal is provided for use in a device adapted to withstand thermal cycling from about 20 to about 1000 degrees C. The sealed joint includes a metal member, a ceramic member having an end portion, and an active metal braze forming a joint to seal the metal member to the ceramic member. The joint is positioned remote from the end portion of the ceramic member to avoid stresses at the ends or edges of the ceramic member. The sealed joint is particularly suited for use to form sealed metal to ceramic joints in a thermoelectric generator such as a sodium heat engine where a solid ceramic electrolyte is joined to metal parts in the system.

Lasecki, John V. (Livonia, MI); Novak, Robert F. (Farmington Hills, MI); McBride, James R. (Ypsilanti, MI)

1991-01-01T23:59:59.000Z

91

Metal to ceramic sealed joint  

DOE Patents (OSTI)

A metal to ceramic sealed joint which can withstand wide variations in temperature and maintain a good seal is provided for use in a device adapted to withstand thermal cycling from about 20 to about 1000 degrees C. The sealed joint includes a metal member, a ceramic member having an end portion, and an active metal braze forming a joint to seal the metal member to the ceramic member. The joint is positioned remote from the end portion of the ceramic member to avoid stresses at the ends or edges of the ceramic member. The sealed joint is particularly suited for use to form sealed metal to ceramic joints in a thermoelectric generator such as a sodium heat engine where a solid ceramic electrolyte is joined to metal parts in the system. 11 figures.

Lasecki, J.V.; Novak, R.F.; McBride, J.R.

1991-08-27T23:59:59.000Z

92

Joint Center for Artificial Photosynthesis  

NLE Websites -- All DOE Office Websites (Extended Search)

North JCAP Headquarters Joint Center for Artificial Photosynthesis California Institute of Technology Jorgensen Laboratory, Mail Code 132-80 1200 East California Boulevard...

93

DOC-DOE Joint China Mission Statement | Department of Energy  

Office of Environmental Management (EM)

Joint China Mission Statement DOC-DOE Joint China Mission Statement DOC-DOE Joint China Mission Statement DOC-DOE Joint China Mission Statement More Documents & Publications...

94

Ethiopia-Joint Programme on Resource Efficient and Cleaner Production  

Open Energy Info (EERE)

Ethiopia-Joint Programme on Resource Efficient and Cleaner Production Ethiopia-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Jump to: navigation, search Name Ethiopia-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Agency/Company /Organization United Nations Industrial Development Organization (UNIDO), United Nations Environment Programme (UNEP) Partner Ministry of Energy, Ministry of Planning, Ministry of Finance, Ministry of Environment, Ministry of Industry Sector Climate, Energy, Water Focus Area Renewable Energy, Non-renewable Energy, Agriculture, Economic Development, Goods and Materials, Industry, People and Policy, Water Conservation Topics Background analysis, Co-benefits assessment, - Environmental and Biodiversity, - Health, - Macroeconomic, Finance, GHG inventory, Implementation, Low emission development planning, -LEDS, -NAMA, -Roadmap, -TNA, Market analysis, Pathways analysis, Policies/deployment programs, Resource assessment, Technology characterizations

95

Guatemala-Joint Programme on Resource Efficient and Cleaner Production  

Open Energy Info (EERE)

Guatemala-Joint Programme on Resource Efficient and Cleaner Production Guatemala-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Jump to: navigation, search Name Guatemala-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Agency/Company /Organization United Nations Industrial Development Organization (UNIDO), United Nations Environment Programme (UNEP) Partner Ministry of Energy, Ministry of Planning, Ministry of Finance, Ministry of Environment, Ministry of Industry Sector Climate, Energy, Water Focus Area Renewable Energy, Non-renewable Energy, Agriculture, Economic Development, Goods and Materials, Industry, People and Policy, Water Conservation Topics Background analysis, Co-benefits assessment, - Environmental and Biodiversity, - Health, - Macroeconomic, Finance, GHG inventory, Implementation, Low emission development planning, -LEDS, -NAMA, -Roadmap, -TNA, Market analysis, Pathways analysis, Policies/deployment programs, Resource assessment, Technology characterizations

96

Honduras-Joint Programme on Resource Efficient and Cleaner Production  

Open Energy Info (EERE)

Honduras-Joint Programme on Resource Efficient and Cleaner Production Honduras-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Jump to: navigation, search Name Honduras-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Agency/Company /Organization United Nations Industrial Development Organization (UNIDO), United Nations Environment Programme (UNEP) Partner Ministry of Energy, Ministry of Planning, Ministry of Finance, Ministry of Environment, Ministry of Industry Sector Climate, Energy, Water Focus Area Renewable Energy, Non-renewable Energy, Agriculture, Economic Development, Goods and Materials, Industry, People and Policy, Water Conservation Topics Background analysis, Co-benefits assessment, - Environmental and Biodiversity, - Health, - Macroeconomic, Finance, GHG inventory, Implementation, Low emission development planning, -LEDS, -NAMA, -Roadmap, -TNA, Market analysis, Pathways analysis, Policies/deployment programs, Resource assessment, Technology characterizations

97

Zimbabwe-Joint Programme on Resource Efficient and Cleaner Production  

Open Energy Info (EERE)

Zimbabwe-Joint Programme on Resource Efficient and Cleaner Production Zimbabwe-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Jump to: navigation, search Name Zimbabwe-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Agency/Company /Organization United Nations Industrial Development Organization (UNIDO), United Nations Environment Programme (UNEP) Partner Ministry of Energy, Ministry of Planning, Ministry of Finance, Ministry of Environment, Ministry of Industry Sector Climate, Energy, Water Focus Area Renewable Energy, Non-renewable Energy, Agriculture, Economic Development, Goods and Materials, Industry, People and Policy, Water Conservation Topics Background analysis, Co-benefits assessment, - Environmental and Biodiversity, - Health, - Macroeconomic, Finance, GHG inventory, Implementation, Low emission development planning, -LEDS, -NAMA, -Roadmap, -TNA, Market analysis, Pathways analysis, Policies/deployment programs, Resource assessment, Technology characterizations

98

Mozambique-Joint Programme on Resource Efficient and Cleaner Production  

Open Energy Info (EERE)

Mozambique-Joint Programme on Resource Efficient and Cleaner Production Mozambique-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Jump to: navigation, search Name Mozambique-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Agency/Company /Organization United Nations Industrial Development Organization (UNIDO), United Nations Environment Programme (UNEP) Partner Ministry of Energy, Ministry of Planning, Ministry of Finance, Ministry of Environment, Ministry of Industry Sector Climate, Energy, Water Focus Area Renewable Energy, Non-renewable Energy, Agriculture, Economic Development, Goods and Materials, Industry, People and Policy, Water Conservation Topics Background analysis, Co-benefits assessment, - Environmental and Biodiversity, - Health, - Macroeconomic, Finance, GHG inventory, Implementation, Low emission development planning, -LEDS, -NAMA, -Roadmap, -TNA, Market analysis, Pathways analysis, Policies/deployment programs, Resource assessment, Technology characterizations

99

Bulgaria-Joint Programme on Resource Efficient and Cleaner Production  

Open Energy Info (EERE)

Bulgaria-Joint Programme on Resource Efficient and Cleaner Production Bulgaria-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Jump to: navigation, search Name Bulgaria-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Agency/Company /Organization United Nations Industrial Development Organization (UNIDO), United Nations Environment Programme (UNEP) Partner Ministry of Energy, Ministry of Planning, Ministry of Finance, Ministry of Environment, Ministry of Industry Sector Climate, Energy, Water Focus Area Renewable Energy, Non-renewable Energy, Agriculture, Economic Development, Goods and Materials, Industry, People and Policy, Water Conservation Topics Background analysis, Co-benefits assessment, - Environmental and Biodiversity, - Health, - Macroeconomic, Finance, GHG inventory, Implementation, Low emission development planning, -LEDS, -NAMA, -Roadmap, -TNA, Market analysis, Pathways analysis, Policies/deployment programs, Resource assessment, Technology characterizations

100

Cambodia-Joint Programme on Resource Efficient and Cleaner Production  

Open Energy Info (EERE)

Cambodia-Joint Programme on Resource Efficient and Cleaner Production Cambodia-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Jump to: navigation, search Name Cambodia-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Agency/Company /Organization United Nations Industrial Development Organization (UNIDO), United Nations Environment Programme (UNEP) Partner Ministry of Energy, Ministry of Planning, Ministry of Finance, Ministry of Environment, Ministry of Industry Sector Climate, Energy, Water Focus Area Renewable Energy, Non-renewable Energy, Agriculture, Economic Development, Goods and Materials, Industry, People and Policy, Water Conservation Topics Background analysis, Co-benefits assessment, - Environmental and Biodiversity, - Health, - Macroeconomic, Finance, GHG inventory, Implementation, Low emission development planning, -LEDS, -NAMA, -Roadmap, -TNA, Market analysis, Pathways analysis, Policies/deployment programs, Resource assessment, Technology characterizations

Note: This page contains sample records for the topic "joint implementation kyoto" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Slovakia-Joint Programme on Resource Efficient and Cleaner Production  

Open Energy Info (EERE)

Slovakia-Joint Programme on Resource Efficient and Cleaner Production Slovakia-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Jump to: navigation, search Name Slovakia-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Agency/Company /Organization United Nations Industrial Development Organization (UNIDO), United Nations Environment Programme (UNEP) Partner Ministry of Energy, Ministry of Planning, Ministry of Finance, Ministry of Environment, Ministry of Industry Sector Climate, Energy, Water Focus Area Renewable Energy, Non-renewable Energy, Agriculture, Economic Development, Goods and Materials, Industry, People and Policy, Water Conservation Topics Background analysis, Co-benefits assessment, - Environmental and Biodiversity, - Health, - Macroeconomic, Finance, GHG inventory, Implementation, Low emission development planning, -LEDS, -NAMA, -Roadmap, -TNA, Market analysis, Pathways analysis, Policies/deployment programs, Resource assessment, Technology characterizations

102

Colombia-Joint Programme on Resource Efficient and Cleaner Production  

Open Energy Info (EERE)

Colombia-Joint Programme on Resource Efficient and Cleaner Production Colombia-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Jump to: navigation, search Name Colombia-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Agency/Company /Organization United Nations Industrial Development Organization (UNIDO), United Nations Environment Programme (UNEP) Partner Ministry of Energy, Ministry of Planning, Ministry of Finance, Ministry of Environment, Ministry of Industry Sector Climate, Energy, Water Focus Area Renewable Energy, Non-renewable Energy, Agriculture, Economic Development, Goods and Materials, Industry, People and Policy, Water Conservation Topics Background analysis, Co-benefits assessment, - Environmental and Biodiversity, - Health, - Macroeconomic, Finance, GHG inventory, Implementation, Low emission development planning, -LEDS, -NAMA, -Roadmap, -TNA, Market analysis, Pathways analysis, Policies/deployment programs, Resource assessment, Technology characterizations

103

Tanzania-Joint Programme on Resource Efficient and Cleaner Production  

Open Energy Info (EERE)

Tanzania-Joint Programme on Resource Efficient and Cleaner Production Tanzania-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Jump to: navigation, search Name Tanzania-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Agency/Company /Organization United Nations Industrial Development Organization (UNIDO), United Nations Environment Programme (UNEP) Partner Ministry of Energy, Ministry of Planning, Ministry of Finance, Ministry of Environment, Ministry of Industry Sector Climate, Energy, Water Focus Area Renewable Energy, Non-renewable Energy, Agriculture, Economic Development, Goods and Materials, Industry, People and Policy, Water Conservation Topics Background analysis, Co-benefits assessment, - Environmental and Biodiversity, - Health, - Macroeconomic, Finance, GHG inventory, Implementation, Low emission development planning, -LEDS, -NAMA, -Roadmap, -TNA, Market analysis, Pathways analysis, Policies/deployment programs, Resource assessment, Technology characterizations

104

A National Forum on Demand Response: Results on What Remains to Be Done to Achieve Its Potential- Program Design and Implementation Working Group  

Energy.gov (U.S. Department of Energy (DOE))

In July 2011, the Federal Energy Regulatory Commission's (FERC) staff and the Department of Energy (DOE) jointly submitted to Congress a required “Implementation Proposal for the National Action...

105

CLEERS Coordination & Joint Development of Benchmark Kinetics...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CLEERS Coordination & Joint Development of Benchmark Kinetics for LNT & SCR CLEERS Coordination & Joint Development of Benchmark Kinetics for LNT & SCR 2012 DOE Hydrogen and Fuel...

106

CLEERS Coordination & Joint Development of Benchmark Kinetics...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Joint Development of Benchmark Kinetics for LNT & SCR CLEERS Coordination & Joint Development of Benchmark Kinetics for LNT & SCR 2011 DOE Hydrogen and Fuel Cells Program, and...

107

Appropriateness Criteria and Elective Procedures — Total Joint Arthroplasty  

Science Journals Connector (OSTI)

...the importance of such criteria and have already started developing them as guidelines for other orthopedic procedures. Second, accountable care organizations and other institutions pursuing similar health care delivery models are becoming influential, and as they move away from procedure-based payments... The implementation of appropriateness criteria that help to identify the patients likely to benefit most from a given procedure could help to combat increasing health care costs while enhancing access and quality. Total joint arthroplasty offers a prime example.

Ghomrawi H.M.K.Schackman B.R.Mushlin A.I.

2012-12-27T23:59:59.000Z

108

Implementing for Implementing Executive Order 13423  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

IMPLEMENTING EXECUTIVE IMPLEMENTING EXECUTIVE ORDER 13423 "Strengthening Federal Environmental, Energy, and Transportation Management" March 29, 2007 0 Contents I. Introduction ......................................................................................................................1 A. Purpose..................................................................................................................1 B. Authority ...............................................................................................................1 C. Organization and Oversight ..................................................................................1 D. Overarching Policy and Directives .......................................................................4

109

Philip D. Rack Joint Faculty  

E-Print Network (OSTI)

Philip D. Rack Joint Faculty Dept. of Materials Science and Engineering University of Tennessee invited reviews and 2 book chapters Full publication list available: Philip D. Rack Research Synopsis 1

Pennycook, Steve

110

US/Brazil joint pilot project objectives  

SciTech Connect

This paper describes a joint US/Brazil pilot project for rural electrification, whose major goals are: to establish technical, institutional, and economic confidence in using renewable energy (PV and wind) to meet the needs of the citizens of rural Brazil; to establish on-going institutional, individual and business relationships necessary to implement sustainable programs and commitments; to lay the groundwork for larger scale rural electrification through the use of distributed renewable technologies. The projects have supported low power home lighting systems, lighting and refrigeration for schools and medical centers, and water pumping systems. This is viewed as a long term project, where much of the equipment will come from the US, but Brazil will be responsible for program management, and sharing data gained from the program. The paper describes in detail the Brazilian program which was instituted to support this phased project.

NONE

1997-12-01T23:59:59.000Z

111

Experimental study on the thorium-loaded accelerator-driven system at the Kyoto Univ. critical assembly  

SciTech Connect

The experimental study on the thorium-loaded accelerator-driven system (ADS) is conducted in the Kyoto Univ. Critical Assembly (KUCA). The experiments are carried out in both the critical and subcritical states for attaining the reaction rates of the thorium capture and fission reactions. In the critical system, the thorium plate irradiation experiment is carried out for the thorium capture and fission reactions. From the results of the measurements, the thorium fission reactions are obtained apparently in the critical system, and the C/E values of reaction rates show the accuracy of relative difference of about 30%. In the ADS experiments with 14 MeV neutrons and 100 MeV protons, the subcritical experiments are carried out in the thorium-loaded cores to obtain the capture reaction rates through the measurements of {sup 115}In(n, {gamma}){sup 116m}In reactions. The results of the experiments reveal the difference between the reaction rate distributions for the change in not only the neutron spectrum but also the external neutron source. The comparison between the measured and calculated reaction rate distributions demonstrates a discrepancy of the accuracy of reaction rate analyses of thorium capture reactions through the thorium-loaded ADS experiments with 14 MeV neutrons. Hereafter, kinetic experiments are planned to be carried out to deduce the delayed neutron decay constants and subcriticality using the pulsed neutron method. (authors)

Pyeon, C. H.; Yagi, T.; Lim, J. Y.; Misawa, T. [Nuclear Science Engineering Div., Research Reactor Inst., Kyoto Univ., Asashiro-nishi, Kumatori-cho, Sennan-gun, Osaka 590-0494 (Japan)

2012-07-01T23:59:59.000Z

112

IPv6 Implementation Checklist  

NLE Websites -- All DOE Office Websites (Extended Search)

IPv6 Implementation Checklist Engineering Services The Network OSCARS Fasterdata IPv6 Network IPv6 Implementation Checklist ESnet IPv6 Mirror Servers ESnet IPv6 History ESnet...

113

Technique and application for quantifying dynamic shoulder joint kinematics and glenohumeral joint contact patterns  

E-Print Network (OSTI)

The shoulder (glenohumeral) joint has the greatest range of motion of all human joints; as a result, it is particularly vulnerable to dislocation and injury. The ability to accurately measure dynamic in-vivo joint kinematics ...

Massimini, Daniel Frank

2014-01-01T23:59:59.000Z

114

Implementing Executive Order 13423  

Energy.gov (U.S. Department of Energy (DOE))

Guide describes the instructions on the requirements and how fleets should implement the Executive Order 13423.

115

First metatarsophalangeal joint range of motion : influence of ankle joint position and gastrocsoleus muscle stretching.  

E-Print Network (OSTI)

??[Truncated abstract] First metatarsophalangeal joint (MTPJ1) motion is an important factor in normal weight transference during walking. Disruptions to normal range can influence joints both… (more)

North, Ian Graham

2008-01-01T23:59:59.000Z

116

2010_Nuclear_Security_Joint_Statement.pdf | Department of Energy  

Energy Savers (EERE)

2010NuclearSecurityJointStatement.pdf 2010NuclearSecurityJointStatement.pdf 2010NuclearSecurityJointStatement.pdf More Documents & Publications United States and France...

117

Joint Fuel Cell Technologies and Advanced Manufacturing Webinar...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Joint Fuel Cell Technologies and Advanced Manufacturing Webinar Joint Fuel Cell Technologies and Advanced Manufacturing Webinar Download the presentation slides from the "Joint...

118

Joint strength in RCS frames  

E-Print Network (OSTI)

As part of a National Science Foundation (NSF) program ics. on composite and hybrid systems at Texas A&M University, the objective of this thesis is to investigate the joint strength in reinforced column-steel beam (RCS) special moment frames...

Kirby, Cynthia Dawn

1998-01-01T23:59:59.000Z

119

Modeling joint friction in structural dynamics.  

SciTech Connect

The presence of mechanical joints--typified by the lap joint--in otherwise linear structures has been accommodated in structural dynamics via ad hoc methods for a century. The methods range from tuning linear models to approximate non-linear behavior in restricted load ranges to various methods which introduce joint dissipation in a post-processing stage. Other methods, employing constitutive models for the joints are being developed and their routine use is on the horizon.

Segalman, Daniel Joseph

2005-05-01T23:59:59.000Z

120

Joint Genome Institute's Automation Approach and History  

E-Print Network (OSTI)

Joint Genome Institute’s Automation Approach and Historythroughput environment; – automation does not necessarilyissues “Islands of Automation” – modular instruments with

Roberts, Simon

2006-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "joint implementation kyoto" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Joint Center for Artificial Photosynthesis  

NLE Websites -- All DOE Office Websites (Extended Search)

implementation of an integrated solar-fuels generator based on artificial photosynthesis. Current development work in the program is focused on the design of prototype...

122

MIGRATION DES JOINTS DE GRAINS LA MIGRATION DES JOINTS INTERGRANULAIRES  

E-Print Network (OSTI)

(influence de la force motrice, de la température, de l'orientation, de la présence d'éléments étrangers produise sponta- nément, il faut qu'il existe une force motrice, c'est-à-dire que le déplacement du joint accessibles. TrÚs schématiquement, on pourra poser entre la vitesse de migration v et la force motrice F une

Boyer, Edmond

123

ORISE: Policy Implementation  

NLE Websites -- All DOE Office Websites (Extended Search)

Policy Implementation The Oak Ridge Institute for Science and Education (ORISE) assists the U.S. Department of Energy (DOE) Office of Science in the implementation of its program...

124

Joint Report Issued by the U.S. Secretary of Energy and the Director of the  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Joint Report Issued by the U.S. Secretary of Energy and the Joint Report Issued by the U.S. Secretary of Energy and the Director of the Russian Federation's Federal Atomic Energy Agency (Rosatom) Joint Report Issued by the U.S. Secretary of Energy and the Director of the Russian Federation's Federal Atomic Energy Agency (Rosatom) July 12, 2006 - 3:01pm Addthis WASHINGTON, DC - U.S. Department of Energy (DOE) Secretary Samuel Bodman announced today that he and Russian Federal Atomic Energy Agency Director Sergey Kiriyenko have submitted to Presidents Bush and Putin the third report of the Senior Interagency Working Group on implementation of the February 2005 Bratislava Checklist. "We have jointly agreed to maintain the aggressive timeline of prioritized repatriation of fresh and spent highly enriched uranium (HEU) fuel and

125

14th Annual Joint DOE/EFCOG Chemical Safety and Worker Safety and Health  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

4th Annual Joint DOE/EFCOG Chemical Safety and Worker Safety and 4th Annual Joint DOE/EFCOG Chemical Safety and Worker Safety and Health Program (10 CFR 851) Workshop 14th Annual Joint DOE/EFCOG Chemical Safety and Worker Safety and Health Program (10 CFR 851) Workshop Workshop Dates: March 13-15, 2012 The workshop served to promote continuous improvement in the implementation of 851 through the shared experiences and enhancements of a variety of DOE stakeholder communities. Panel members from Savannah River Nuclear Solutions, the United Steel Workers, the DOE Offices of Environmental Management and the National Nuclear Security Administration, and the HSS Offices of Worker Safety and Health Policy and Enforcement and Oversight, provided 851 implementation perspectives and an opportunity for interactive discussion and exchange with attendees.

126

Environmental Protection Implementation Plan  

SciTech Connect

This Environmental Protection Implementation Plan is intended to ensure that the environmental program objectives of Department of Energy Order 5400.1 are achieved at SNL/California. The Environmental Protection Implementation Plan serves as an aid to management and staff to implement new environmental programs in a timely manner.

Brekke, D.D.

1994-01-01T23:59:59.000Z

127

Implementing AccountableCare  

E-Print Network (OSTI)

Implementing AccountableCare Organizations POLICYBRIEF MAY2010 ADVANCING NATIONAL HEALTH REFORMPolicyandClinicalPractice #12;i Berkeley Center on Health, Economic & Family Security|Implementing Accountable Care to implement the newly-minted comprehensive healthcare reform law, the Patient Protection and Affordable Care

Kammen, Daniel M.

128

Joint Environmental Management System (EMS) Declaration of Conformance...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Services Environmental Management System Joint Environmental Management System (EMS) Declaration of Conformance Joint Environmental Management System (EMS) Declaration of...

129

COUNCIL JOINT ACTION 2004/495/CFSP of 17 May 2004  

E-Print Network (OSTI)

COUNCIL JOINT ACTION 2004/495/CFSP of 17 May 2004 on support for IAEA activities under its Nuclear to be pursued. (4) The improvement of the physical protection of nuclear material and facilities was approved by the IAEA Board of Governors in September 2003 and the implementation of its Nuclear Security

Sussex, University of

130

Metal-ceramic joint assembly  

DOE Patents (OSTI)

A metal-ceramic joint assembly in which a brazing alloy is situated between metallic and ceramic members. The metallic member is either an aluminum-containing stainless steel, a high chromium-content ferritic stainless steel or an iron nickel alloy with a corrosion protection coating. The brazing alloy, in turn, is either an Au-based or Ni-based alloy with a brazing temperature in the range of 9500 to 1200.degree. C.

Li, Jian (New Milford, CT)

2002-01-01T23:59:59.000Z

131

Malibu Joint Venture | Open Energy Information  

Open Energy Info (EERE)

Malibu Joint Venture Malibu Joint Venture Jump to: navigation, search Name Malibu Joint Venture Place Germany Sector Solar Product String representation "German utility ... e of next year." is too long. References Malibu Joint Venture[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Malibu Joint Venture is a company located in Germany . References ↑ "Malibu Joint Venture" Retrieved from "http://en.openei.org/w/index.php?title=Malibu_Joint_Venture&oldid=348612" Categories: Clean Energy Organizations Companies Organizations Stubs What links here Related changes Special pages Printable version Permanent link Browse properties 429 Throttled (bot load) Error 429 Throttled (bot load)

132

Kyoto University International Center  

E-Print Network (OSTI)

and Astronautics, Nuclear Engineering, (6-year program) Faculty of Engineering Bachelor of Engineering Global Engineering, Architecture, Engineering Science, Electrical and Electronic Engineering, Informatics and Mathematical Science, Industrial

Takada, Shoji

133

Alabama Compliance Implementation  

NLE Websites -- All DOE Office Websites (Extended Search)

Alabama Alabama Compliance Implementation and Evaluation (CIE) Guide BUILDING TECHNOLOGIES PROGRAM COMPLIANCE IMPLEMENTATION AND EVALUATION (CIE) GUIDE 2 This Guide is designed to assist state and local code jurisdictions in achieving statewide compliance with the 2009 International Energy Conservation Code (IECC) for residential buildings and ANSI/ASHRAE/IESNA Standard 90.1-2007 for commercial buildings. COMPLIANCE IMPLEMENTATION AND EVALUATION (CIE) GUIDE 3 Alabama WHAT'S INSIDE CIE Guide Overview-Flow Diagram ........................................................................................................................... 5 PART 1: Guide Overview .................................................................................................................................................

134

October 2014 Implementation Manual  

NLE Websites -- All DOE Office Websites (Extended Search)

system is reviewed for potential efficiency improvements including lower flows, reduced pipeline friction and repair of leaks. Implementation Manual (10114) - Section 6:...

135

Joint Center for Artificial Photosynthesis  

ScienceCinema (OSTI)

The Joint Center for Artificial Photosynthesis (JCAP) is the nation's largest research program dedicated to the development of an artificial solar-fuel generation technology. Established in 2010 as a U.S. Department of Energy (DOE) Energy Innovation Hub, JCAP aims to find a cost-effective method to produce fuels using only sunlight, water, and carbon dioxide as inputs. JCAP brings together more than 140 top scientists and researchers from the California Institute of Technology and its lead partner, Berkeley Lab, along with collaborators from the SLAC National Accelerator Laboratory, and the University of California campuses at Irvine and San Diego.

Koval, Carl; Lee, Kenny; Houle, Frances; Lewis, Nate

2013-12-19T23:59:59.000Z

136

Joint Center for Artificial Photosynthesis  

SciTech Connect

The Joint Center for Artificial Photosynthesis (JCAP) is the nation's largest research program dedicated to the development of an artificial solar-fuel generation technology. Established in 2010 as a U.S. Department of Energy (DOE) Energy Innovation Hub, JCAP aims to find a cost-effective method to produce fuels using only sunlight, water, and carbon dioxide as inputs. JCAP brings together more than 140 top scientists and researchers from the California Institute of Technology and its lead partner, Berkeley Lab, along with collaborators from the SLAC National Accelerator Laboratory, and the University of California campuses at Irvine and San Diego.

Koval, Carl; Lee, Kenny; Houle, Frances; Lewis, Nate

2013-12-10T23:59:59.000Z

137

Entropic uncertainties for joint quantum measurements  

SciTech Connect

We investigate the uncertainty associated with a joint quantum measurement of two spin components of a spin-(1/2) particle and quantify this in terms of entropy. We consider two entropic quantities, the joint entropy and the sum of the marginal entropies, and obtain lower bounds for each of these quantities. For the case of joint measurements where we measure each spin observable equally well, these lower bounds are tight.

Brougham, Thomas [Department of Physics, FJFI, CVUT, Brehova 7, 115 19 Praha 1 (Czech Republic); SUPA, Department of Physics, University of Strathclyde, Glasgow G4 ONG (United Kingdom); Andersson, Erika [SUPA, Department of Physics, School of EPS, Heriot-Watt University, Edinburgh EH14 4As (United Kingdom); Barnett, Stephen M. [SUPA, Department of Physics, University of Strathclyde, Glasgow G4 ONG (United Kingdom)

2009-10-15T23:59:59.000Z

138

CLEERS Coordination & Joint Development of Benchmark Kinetics...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Kinetic Data CLEERS Coordination & Joint Development of Benchmark Kinetics for LNT & SCR CLEERS Coordination & Development of Catalyst Process Kinetic Data - Pres. 1:...

139

Thomas Moore creates joint invention with MIT  

NLE Websites -- All DOE Office Websites (Extended Search)

which led to a seafood lunch - which led to a joint invention with colleagues from the Massachusetts Institute of Technology (MIT) that contributed to a sustainable energy...

140

Washington Joint Aquatic Resources Permit Application | Open...  

Open Energy Info (EERE)

Permit Application Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- Permit ApplicationPermit Application: Washington Joint Aquatic...

Note: This page contains sample records for the topic "joint implementation kyoto" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Joint Statement of the U.S.-Iraq Joint Coordinating Committee on Energy |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Joint Statement of the U.S.-Iraq Joint Coordinating Committee on Joint Statement of the U.S.-Iraq Joint Coordinating Committee on Energy Joint Statement of the U.S.-Iraq Joint Coordinating Committee on Energy April 23, 2012 - 2:25pm Addthis The governments of the United States of America and the Republic of Iraq reaffirmed their commitment to joint cooperation in the areas of oil production and export, natural gas, electricity, and critical energy infrastructure protection during the inaugural meeting of the Joint Coordinating Committee (JCC) on Energy on April 23, 2012. This meeting, held at the U.S. Department of Energy, was co-chaired by Iraqi Deputy Prime Minister for Energy Dr. Hussain Al Shahristani and U.S. Deputy Secretary of Energy Daniel Poneman and Special Envoy and Coordinator for International Energy Affairs at the U.S. Department of State Ambassador

142

Joint Statement of the U.S.-Iraq Joint Coordinating Committee on Energy |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Joint Statement of the U.S.-Iraq Joint Coordinating Committee on Joint Statement of the U.S.-Iraq Joint Coordinating Committee on Energy Joint Statement of the U.S.-Iraq Joint Coordinating Committee on Energy April 23, 2012 - 2:25pm Addthis The governments of the United States of America and the Republic of Iraq reaffirmed their commitment to joint cooperation in the areas of oil production and export, natural gas, electricity, and critical energy infrastructure protection during the inaugural meeting of the Joint Coordinating Committee (JCC) on Energy on April 23, 2012. This meeting, held at the U.S. Department of Energy, was co-chaired by Iraqi Deputy Prime Minister for Energy Dr. Hussain Al Shahristani and U.S. Deputy Secretary of Energy Daniel Poneman and Special Envoy and Coordinator for International Energy Affairs at the U.S. Department of State Ambassador

143

Kinetic role of the metatarsophalangeal joint in normal walking: Joint moment and power  

Science Journals Connector (OSTI)

Joint moment and power of the metatarsophalangeal (MP) joint in ... with synchronous measurements of ground reaction forces and foot pressure distribution was performed with the two-segment foot model. Twenty-two...

Youngho Kim; Seunghyeon Kim; Jongsang Son…

2012-08-01T23:59:59.000Z

144

Environmental protection Implementation Plan  

SciTech Connect

This ``Environmental Protection Implementation Plan'' is intended to ensure that the environmental program objectives of Department of Energy Order 5400.1 are achieved at SNL/California. This document states SNL/California's commitment to conduct its operations in an environmentally safe and responsible manner. The ``Environmental Protection Implementation Plan'' helps management and staff comply with applicable environmental responsibilities.

R. C. Holland

1999-12-01T23:59:59.000Z

145

Joint DOE-Rosatom Statement  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Statement Statement on the U.S. - Russian Excess Weapon-grade Plutonium Disposition Program The U.S. Department of Energy (DOE) and the Federal Atomic Energy Agency, Russian Federation (Rosatom), as the Executive Agents for the implementation of the 2000 Plutonium Management and Disposition Agreement, hereby reaffirm their commitment to implementing the 2000 Agreement and effective and transparent disposition of 34 metric tons each of weapon- grade plutonium designated as no longer required for defense purposes. They confirm that the preferred disposition method for such plutonium to implement the 2000 Agreement is irradiation of nuclear fuel in reactors. Their expert groups are directed to: * Provide for the performance of technical analysis that will contribute to both

146

Research Reactors and Radiation Facilities for Joint Use Program  

E-Print Network (OSTI)

Observatory, a facility of the Graduate School of Science of Kyoto University, was constructed in 1968's current main research target is to unveil the origin of the solar magnetic activities that govern science and technology, material science, radiation life science, and radiation medical science

Takada, Shoji

147

ATSC Recommended Practice: Implementation Guidelines for the ATSC Data  

E-Print Network (OSTI)

membership organization developing voluntary standards for the entire spectrum of advanced television systems. Specifically, ATSC is working to coordinate television standards among different communications media focusing on digital television, interactive systems, and broadband multimedia communications. ATSC is also developing digital television implementation strategies and presenting educational seminars on the ATSC standards. ATSC was formed in 1982 by the member organizations of the Joint Committee on

unknown authors

2001-01-01T23:59:59.000Z

148

Implementation Proposal for  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Implementation Proposal for Implementation Proposal for The National Action Plan on Demand Response Report to Congress Prepared by staff of the Federal Energy Regulatory Commission and the U.S. Department of Energy The opinions and views expressed in this staff report do not necessarily represent those of the Federal Energy Regulatory Commission, its Chairman, or individual Commissioners, and are not binding on the Commission. Implementation Proposal for The National Action Plan on Demand Response July 2011 TABLE OF CONTENTS Executive Summary ............................................................................................... iii I. Introduction ......................................................................................................1

149

Joint Institute for High Temperatures  

National Nuclear Security Administration (NNSA)

Joint Institute for High Temperatures of Russian Academy of Sciences Moscow Institute of Physics and Technology Extended title Extended title Excited state of warm dense matter or Exotic state of warm dense matter or Novel form of warm dense matter or New form of plasma Three sources of generation similarity: solid state density, two temperatures: electron temperature about tens eV, cold ions keep original crystallographic positions, but electron band structure and phonon dispersion are changed, transient but steady (quasi-stationary for a short time) state of non-equilibrium, uniform plasmas (no reference to non-ideality, both strongly and weakly coupled plasmas can be formed) spectral line spectra are emitted by ion cores embedded in plasma environment which influences the spectra strongly,

150

Unveiling the Implementation Guide  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Oak Ridge National Laboratory www.ornl.gov Oak Ridge National Laboratory www.ornl.gov Unveiling the Implementation Guide October 11, 2011 Michaela Martin Program Manager Residential, Commercial, and Industrial Energy Efficiency Oak Ridge National Laboratory 2 | Oak Ridge National Laboratory www.ornl.gov Guiding Principles for Successfully Implementing Industrial Energy Assessment Recommendations * New resource for industry * Identifies key principles and actions that lead to successful implementation of energy assessment recommendations * Connects readers with a variety of trusted resources * Simple tools for supporting energy management programs and continuous energy performance improvement efforts * Available in hard copy and on the web Implementation Guide Overview 3 | Oak Ridge National Laboratory www.ornl.gov

151

Implementing Turtle Graphics...  

Science Journals Connector (OSTI)

Turtle Graphics were invented by Seymour Papert in ... drawn on the screen by an (imaginary) turtle which happens to be carrying a pen ... trace is left. In some implementations the turtle is a robot, and the nam...

Robin Jones; Ian Stewart

1987-01-01T23:59:59.000Z

152

INSTRUCTIONS FOR IMPLEMENTING EXECUTIVE  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

March 29, 2007 INSTRUCTIONS FOR IMPLEMENTING EXECUTIVE ORDER 13423 "Strengthening Federal Environmental, Energy, and Transportation Management" i Contents I. Introduction ......................................................................................................................1 A. Purpose..................................................................................................................1 B. Authority ...............................................................................................................1 C. Organization and Oversight ..................................................................................1 D. Overarching Policy and Directives .......................................................................4

153

U.S.-Japan Joint Statement | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

U.S.-Japan Joint Statement U.S.-Japan Joint Statement U.S.-Japan Joint Statement prepared as part of the International Partnership for a Hydrogen Economy usjapanstatementrelease...

154

United States-Japan Joint Nuclear Energy Action Plan | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

United States-Japan Joint Nuclear Energy Action Plan United States-Japan Joint Nuclear Energy Action Plan An outline on the United States and Japan's joint nuclear energy action...

155

Morocco-Joint Programme on Resource Efficient and Cleaner Production (RECP)  

Open Energy Info (EERE)

Morocco-Joint Programme on Resource Efficient and Cleaner Production (RECP) Morocco-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Jump to: navigation, search Name Morocco-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Agency/Company /Organization United Nations Industrial Development Organization (UNIDO), United Nations Environment Programme (UNEP) Partner Ministry of Energy, Ministry of Planning, Ministry of Finance, Ministry of Environment, Ministry of Industry Sector Climate, Energy, Water Focus Area Renewable Energy, Non-renewable Energy, Agriculture, Economic Development, Goods and Materials, Industry, People and Policy, Water Conservation Topics Background analysis, Co-benefits assessment, - Environmental and Biodiversity, - Health, - Macroeconomic, Finance, GHG inventory, Implementation, Low emission development planning, -LEDS, -NAMA, -Roadmap, -TNA, Market analysis, Pathways analysis, Policies/deployment programs, Resource assessment, Technology characterizations

156

Ecuador-Joint Programme on Resource Efficient and Cleaner Production (RECP)  

Open Energy Info (EERE)

Ecuador-Joint Programme on Resource Efficient and Cleaner Production (RECP) Ecuador-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Jump to: navigation, search Name Ecuador-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Agency/Company /Organization United Nations Industrial Development Organization (UNIDO), United Nations Environment Programme (UNEP) Partner Ministry of Energy, Ministry of Planning, Ministry of Finance, Ministry of Environment, Ministry of Industry Sector Climate, Energy, Water Focus Area Renewable Energy, Non-renewable Energy, Agriculture, Economic Development, Goods and Materials, Industry, People and Policy, Water Conservation Topics Background analysis, Co-benefits assessment, - Environmental and Biodiversity, - Health, - Macroeconomic, Finance, GHG inventory, Implementation, Low emission development planning, -LEDS, -NAMA, -Roadmap, -TNA, Market analysis, Pathways analysis, Policies/deployment programs, Resource assessment, Technology characterizations

157

Kenya-Joint Programme on Resource Efficient and Cleaner Production (RECP)  

Open Energy Info (EERE)

Kenya-Joint Programme on Resource Efficient and Cleaner Production (RECP) Kenya-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Jump to: navigation, search Name Kenya-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Agency/Company /Organization United Nations Industrial Development Organization (UNIDO), United Nations Environment Programme (UNEP) Partner Ministry of Energy, Ministry of Planning, Ministry of Finance, Ministry of Environment, Ministry of Industry Sector Climate, Energy, Water Focus Area Renewable Energy, Non-renewable Energy, Agriculture, Economic Development, Goods and Materials, Industry, People and Policy, Water Conservation Topics Background analysis, Co-benefits assessment, - Environmental and Biodiversity, - Health, - Macroeconomic, Finance, GHG inventory, Implementation, Low emission development planning, -LEDS, -NAMA, -Roadmap, -TNA, Market analysis, Pathways analysis, Policies/deployment programs, Resource assessment, Technology characterizations

158

Fact Sheet: United States-Japan Joint Nuclear Energy Action Plan  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

United States-Japan Joint Nuclear Energy Action Plan United States-Japan Joint Nuclear Energy Action Plan The United States-Japan Joint Nuclear Energy Action Plan is intended to provide a framework for bilateral collaboration in nuclear energy. This Action Plan builds upon our significant, longstanding civilian nuclear cooperation, and will contribute to increasing energy security and managing nuclear waste, addressing nuclear nonproliferation and climate change, advancing goals put forth in President Bush's Global Nuclear Energy Partnership (GNEP) initiative. The Action Plan was signed by representatives of both nations in April 2007. The Action Plan will be implemented by Steering Committee Co-Chairs. Assistant Secretary of Energy Dennis Spurgeon, or his designee, will serve as the U.S. Co-Chair. Japanese Co-Chairs will be selected

159

South Korea-Joint Programme on Resource Efficient and Cleaner Production  

Open Energy Info (EERE)

South Korea-Joint Programme on Resource Efficient and Cleaner Production South Korea-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Jump to: navigation, search Name South Korea-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Agency/Company /Organization United Nations Industrial Development Organization (UNIDO), United Nations Environment Programme (UNEP) Partner Ministry of Energy, Ministry of Planning, Ministry of Finance, Ministry of Environment, Ministry of Industry Sector Climate, Energy, Water Focus Area Renewable Energy, Non-renewable Energy, Agriculture, Economic Development, Goods and Materials, Industry, People and Policy, Water Conservation Topics Background analysis, Co-benefits assessment, - Environmental and Biodiversity, - Health, - Macroeconomic, Finance, GHG inventory, Implementation, Low emission development planning, -LEDS, -NAMA, -Roadmap, -TNA, Market analysis, Pathways analysis, Policies/deployment programs, Resource assessment, Technology characterizations

160

Russia-Joint Programme on Resource Efficient and Cleaner Production (RECP)  

Open Energy Info (EERE)

Russia-Joint Programme on Resource Efficient and Cleaner Production (RECP) Russia-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Jump to: navigation, search Name Russia-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Agency/Company /Organization United Nations Industrial Development Organization (UNIDO), United Nations Environment Programme (UNEP) Partner Ministry of Energy, Ministry of Planning, Ministry of Finance, Ministry of Environment, Ministry of Industry Sector Climate, Energy, Water Focus Area Renewable Energy, Non-renewable Energy, Agriculture, Economic Development, Goods and Materials, Industry, People and Policy, Water Conservation Topics Background analysis, Co-benefits assessment, - Environmental and Biodiversity, - Health, - Macroeconomic, Finance, GHG inventory, Implementation, Low emission development planning, -LEDS, -NAMA, -Roadmap, -TNA, Market analysis, Pathways analysis, Policies/deployment programs, Resource assessment, Technology characterizations

Note: This page contains sample records for the topic "joint implementation kyoto" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Croatia-Joint Programme on Resource Efficient and Cleaner Production (RECP)  

Open Energy Info (EERE)

Croatia-Joint Programme on Resource Efficient and Cleaner Production (RECP) Croatia-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Jump to: navigation, search Name Croatia-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Agency/Company /Organization United Nations Industrial Development Organization (UNIDO), United Nations Environment Programme (UNEP) Partner Ministry of Energy, Ministry of Planning, Ministry of Finance, Ministry of Environment, Ministry of Industry Sector Climate, Energy, Water Focus Area Renewable Energy, Non-renewable Energy, Agriculture, Economic Development, Goods and Materials, Industry, People and Policy, Water Conservation Topics Background analysis, Co-benefits assessment, - Environmental and Biodiversity, - Health, - Macroeconomic, Finance, GHG inventory, Implementation, Low emission development planning, -LEDS, -NAMA, -Roadmap, -TNA, Market analysis, Pathways analysis, Policies/deployment programs, Resource assessment, Technology characterizations

162

Sri Lanka-Joint Programme on Resource Efficient and Cleaner Production  

Open Energy Info (EERE)

Sri Lanka-Joint Programme on Resource Efficient and Cleaner Production Sri Lanka-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Jump to: navigation, search Name Sri Lanka-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Agency/Company /Organization United Nations Industrial Development Organization (UNIDO), United Nations Environment Programme (UNEP) Partner Ministry of Energy, Ministry of Planning, Ministry of Finance, Ministry of Environment, Ministry of Industry Sector Climate, Energy, Water Focus Area Renewable Energy, Non-renewable Energy, Agriculture, Economic Development, Goods and Materials, Industry, People and Policy, Water Conservation Topics Background analysis, Co-benefits assessment, - Environmental and Biodiversity, - Health, - Macroeconomic, Finance, GHG inventory, Implementation, Low emission development planning, -LEDS, -NAMA, -Roadmap, -TNA, Market analysis, Pathways analysis, Policies/deployment programs, Resource assessment, Technology characterizations

163

Vietnam-Joint Programme on Resource Efficient and Cleaner Production (RECP)  

Open Energy Info (EERE)

Vietnam-Joint Programme on Resource Efficient and Cleaner Production (RECP) Vietnam-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Jump to: navigation, search Name Vietnam-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Agency/Company /Organization United Nations Industrial Development Organization (UNIDO), United Nations Environment Programme (UNEP) Partner Ministry of Energy, Ministry of Planning, Ministry of Finance, Ministry of Environment, Ministry of Industry Sector Climate, Energy, Water Focus Area Renewable Energy, Non-renewable Energy, Agriculture, Economic Development, Goods and Materials, Industry, People and Policy, Water Conservation Topics Background analysis, Co-benefits assessment, - Environmental and Biodiversity, - Health, - Macroeconomic, Finance, GHG inventory, Implementation, Low emission development planning, -LEDS, -NAMA, -Roadmap, -TNA, Market analysis, Pathways analysis, Policies/deployment programs, Resource assessment, Technology characterizations

164

Brazil-Joint Programme on Resource Efficient and Cleaner Production (RECP)  

Open Energy Info (EERE)

Brazil-Joint Programme on Resource Efficient and Cleaner Production (RECP) Brazil-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Jump to: navigation, search Name Brazil-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Agency/Company /Organization United Nations Industrial Development Organization (UNIDO), United Nations Environment Programme (UNEP) Partner Ministry of Energy, Ministry of Planning, Ministry of Finance, Ministry of Environment, Ministry of Industry Sector Climate, Energy, Water Focus Area Renewable Energy, Non-renewable Energy, Agriculture, Economic Development, Goods and Materials, Industry, People and Policy, Water Conservation Topics Background analysis, Co-benefits assessment, - Environmental and Biodiversity, - Health, - Macroeconomic, Finance, GHG inventory, Implementation, Low emission development planning, -LEDS, -NAMA, -Roadmap, -TNA, Market analysis, Pathways analysis, Policies/deployment programs, Resource assessment, Technology characterizations

165

Republic of Macedonia-Joint Programme on Resource Efficient and Cleaner  

Open Energy Info (EERE)

Republic of Macedonia-Joint Programme on Resource Efficient and Cleaner Republic of Macedonia-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Jump to: navigation, search Name Republic of Macedonia-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Agency/Company /Organization United Nations Industrial Development Organization (UNIDO), United Nations Environment Programme (UNEP) Partner Ministry of Energy, Ministry of Planning, Ministry of Finance, Ministry of Environment, Ministry of Industry Sector Climate, Energy, Water Focus Area Renewable Energy, Non-renewable Energy, Agriculture, Economic Development, Goods and Materials, Industry, People and Policy, Water Conservation Topics Background analysis, Co-benefits assessment, - Environmental and Biodiversity, - Health, - Macroeconomic, Finance, GHG inventory, Implementation, Low emission development planning, -LEDS, -NAMA, -Roadmap, -TNA, Market analysis, Pathways analysis, Policies/deployment programs, Resource assessment, Technology characterizations

166

India-Joint Programme on Resource Efficient and Cleaner Production (RECP)  

Open Energy Info (EERE)

India-Joint Programme on Resource Efficient and Cleaner Production (RECP) India-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Jump to: navigation, search Name India-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Agency/Company /Organization United Nations Industrial Development Organization (UNIDO), United Nations Environment Programme (UNEP) Partner Ministry of Energy, Ministry of Planning, Ministry of Finance, Ministry of Environment, Ministry of Industry Sector Climate, Energy, Water Focus Area Renewable Energy, Non-renewable Energy, Agriculture, Economic Development, Goods and Materials, Industry, People and Policy, Water Conservation Topics Background analysis, Co-benefits assessment, - Environmental and Biodiversity, - Health, - Macroeconomic, Finance, GHG inventory, Implementation, Low emission development planning, -LEDS, -NAMA, -Roadmap, -TNA, Market analysis, Pathways analysis, Policies/deployment programs, Resource assessment, Technology characterizations

167

Tunisia-Joint Programme on Resource Efficient and Cleaner Production (RECP)  

Open Energy Info (EERE)

Tunisia-Joint Programme on Resource Efficient and Cleaner Production (RECP) Tunisia-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Jump to: navigation, search Name Tunisia-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Agency/Company /Organization United Nations Industrial Development Organization (UNIDO), United Nations Environment Programme (UNEP) Partner Ministry of Energy, Ministry of Planning, Ministry of Finance, Ministry of Environment, Ministry of Industry Sector Climate, Energy, Water Focus Area Renewable Energy, Non-renewable Energy, Agriculture, Economic Development, Goods and Materials, Industry, People and Policy, Water Conservation Topics Background analysis, Co-benefits assessment, - Environmental and Biodiversity, - Health, - Macroeconomic, Finance, GHG inventory, Implementation, Low emission development planning, -LEDS, -NAMA, -Roadmap, -TNA, Market analysis, Pathways analysis, Policies/deployment programs, Resource assessment, Technology characterizations

168

Hungary-Joint Programme on Resource Efficient and Cleaner Production (RECP)  

Open Energy Info (EERE)

Hungary-Joint Programme on Resource Efficient and Cleaner Production (RECP) Hungary-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Jump to: navigation, search Name Hungary-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Agency/Company /Organization United Nations Industrial Development Organization (UNIDO), United Nations Environment Programme (UNEP) Partner Ministry of Energy, Ministry of Planning, Ministry of Finance, Ministry of Environment, Ministry of Industry Sector Climate, Energy, Water Focus Area Renewable Energy, Non-renewable Energy, Agriculture, Economic Development, Goods and Materials, Industry, People and Policy, Water Conservation Topics Background analysis, Co-benefits assessment, - Environmental and Biodiversity, - Health, - Macroeconomic, Finance, GHG inventory, Implementation, Low emission development planning, -LEDS, -NAMA, -Roadmap, -TNA, Market analysis, Pathways analysis, Policies/deployment programs, Resource assessment, Technology characterizations

169

South Africa-Joint Programme on Resource Efficient and Cleaner Production  

Open Energy Info (EERE)

South Africa-Joint Programme on Resource Efficient and Cleaner Production South Africa-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Jump to: navigation, search Name South Africa-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Agency/Company /Organization United Nations Industrial Development Organization (UNIDO), United Nations Environment Programme (UNEP) Partner Ministry of Energy, Ministry of Planning, Ministry of Finance, Ministry of Environment, Ministry of Industry Sector Climate, Energy, Water Focus Area Renewable Energy, Non-renewable Energy, Agriculture, Economic Development, Goods and Materials, Industry, People and Policy, Water Conservation Topics Background analysis, Co-benefits assessment, - Environmental and Biodiversity, - Health, - Macroeconomic, Finance, GHG inventory, Implementation, Low emission development planning, -LEDS, -NAMA, -Roadmap, -TNA, Market analysis, Pathways analysis, Policies/deployment programs, Resource assessment, Technology characterizations

170

Egypt-Joint Programme on Resource Efficient and Cleaner Production (RECP)  

Open Energy Info (EERE)

Egypt-Joint Programme on Resource Efficient and Cleaner Production (RECP) Egypt-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Jump to: navigation, search Name Egypt-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Agency/Company /Organization United Nations Industrial Development Organization (UNIDO), United Nations Environment Programme (UNEP) Partner Ministry of Energy, Ministry of Planning, Ministry of Finance, Ministry of Environment, Ministry of Industry Sector Climate, Energy, Water Focus Area Renewable Energy, Non-renewable Energy, Agriculture, Economic Development, Goods and Materials, Industry, People and Policy, Water Conservation Topics Background analysis, Co-benefits assessment, - Environmental and Biodiversity, - Health, - Macroeconomic, Finance, GHG inventory, Implementation, Low emission development planning, -LEDS, -NAMA, -Roadmap, -TNA, Market analysis, Pathways analysis, Policies/deployment programs, Resource assessment, Technology characterizations

171

Uganda-Joint Programme on Resource Efficient and Cleaner Production (RECP)  

Open Energy Info (EERE)

Uganda-Joint Programme on Resource Efficient and Cleaner Production (RECP) Uganda-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Jump to: navigation, search Name Uganda-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Agency/Company /Organization United Nations Industrial Development Organization (UNIDO), United Nations Environment Programme (UNEP) Partner Ministry of Energy, Ministry of Planning, Ministry of Finance, Ministry of Environment, Ministry of Industry Sector Climate, Energy, Water Focus Area Renewable Energy, Non-renewable Energy, Agriculture, Economic Development, Goods and Materials, Industry, People and Policy, Water Conservation Topics Background analysis, Co-benefits assessment, - Environmental and Biodiversity, - Health, - Macroeconomic, Finance, GHG inventory, Implementation, Low emission development planning, -LEDS, -NAMA, -Roadmap, -TNA, Market analysis, Pathways analysis, Policies/deployment programs, Resource assessment, Technology characterizations

172

Serbia-Joint Programme on Resource Efficient and Cleaner Production (RECP)  

Open Energy Info (EERE)

Serbia-Joint Programme on Resource Efficient and Cleaner Production (RECP) Serbia-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Jump to: navigation, search Name Serbia-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Agency/Company /Organization United Nations Industrial Development Organization (UNIDO), United Nations Environment Programme (UNEP) Partner Ministry of Energy, Ministry of Planning, Ministry of Finance, Ministry of Environment, Ministry of Industry Sector Climate, Energy, Water Focus Area Renewable Energy, Non-renewable Energy, Agriculture, Economic Development, Goods and Materials, Industry, People and Policy, Water Conservation Topics Background analysis, Co-benefits assessment, - Environmental and Biodiversity, - Health, - Macroeconomic, Finance, GHG inventory, Implementation, Low emission development planning, -LEDS, -NAMA, -Roadmap, -TNA, Market analysis, Pathways analysis, Policies/deployment programs, Resource assessment, Technology characterizations

173

Armenia-Joint Programme on Resource Efficient and Cleaner Production (RECP)  

Open Energy Info (EERE)

Armenia-Joint Programme on Resource Efficient and Cleaner Production (RECP) Armenia-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Jump to: navigation, search Name Armenia-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Agency/Company /Organization United Nations Industrial Development Organization (UNIDO), United Nations Environment Programme (UNEP) Partner Ministry of Energy, Ministry of Planning, Ministry of Finance, Ministry of Environment, Ministry of Industry Sector Climate, Energy, Water Focus Area Renewable Energy, Non-renewable Energy, Agriculture, Economic Development, Goods and Materials, Industry, - Industrial Processes, People and Policy, Water Conservation Topics Background analysis, Co-benefits assessment, - Environmental and Biodiversity, - Health, - Macroeconomic, Finance, GHG inventory, Implementation, Low emission development planning, -LEDS, -NAMA, -Roadmap, -TNA, Market analysis, Pathways analysis, Policies/deployment programs, Resource assessment, Technology characterizations

174

Laos-Joint Programme on Resource Efficient and Cleaner Production (RECP) in  

Open Energy Info (EERE)

Laos-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Laos-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Jump to: navigation, search Name Laos-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Agency/Company /Organization United Nations Industrial Development Organization (UNIDO), United Nations Environment Programme (UNEP) Partner Ministry of Energy, Ministry of Planning, Ministry of Finance, Ministry of Environment, Ministry of Industry Sector Climate, Energy, Water Focus Area Renewable Energy, Non-renewable Energy, Agriculture, Economic Development, Goods and Materials, Industry, People and Policy, Water Conservation Topics Background analysis, Co-benefits assessment, - Environmental and Biodiversity, - Health, - Macroeconomic, Finance, GHG inventory, Implementation, Low emission development planning, -LEDS, -NAMA, -Roadmap, -TNA, Market analysis, Pathways analysis, Policies/deployment programs, Resource assessment, Technology characterizations

175

El Salvador-Joint Programme on Resource Efficient and Cleaner Production  

Open Energy Info (EERE)

El Salvador-Joint Programme on Resource Efficient and Cleaner Production El Salvador-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Jump to: navigation, search Name El Salvador-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Agency/Company /Organization United Nations Industrial Development Organization (UNIDO), United Nations Environment Programme (UNEP) Partner Ministry of Energy, Ministry of Planning, Ministry of Finance, Ministry of Environment, Ministry of Industry Sector Climate, Energy, Water Focus Area Renewable Energy, Non-renewable Energy, Agriculture, Economic Development, Goods and Materials, Industry, People and Policy, Water Conservation Topics Background analysis, Co-benefits assessment, - Environmental and Biodiversity, - Health, - Macroeconomic, Finance, GHG inventory, Implementation, Low emission development planning, -LEDS, -NAMA, -Roadmap, -TNA, Market analysis, Pathways analysis, Policies/deployment programs, Resource assessment, Technology characterizations

176

Mexico-Joint Programme on Resource Efficient and Cleaner Production (RECP)  

Open Energy Info (EERE)

Mexico-Joint Programme on Resource Efficient and Cleaner Production (RECP) Mexico-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Jump to: navigation, search Name Mexico-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Agency/Company /Organization United Nations Industrial Development Organization (UNIDO), United Nations Environment Programme (UNEP) Partner Ministry of Energy, Ministry of Planning, Ministry of Finance, Ministry of Environment, Ministry of Industry Sector Climate, Energy, Water Focus Area Renewable Energy, Non-renewable Energy, Agriculture, Economic Development, Goods and Materials, Industry, People and Policy, Water Conservation Topics Background analysis, Co-benefits assessment, - Environmental and Biodiversity, - Health, - Macroeconomic, Finance, GHG inventory, Implementation, Low emission development planning, -LEDS, -NAMA, -Roadmap, -TNA, Market analysis, Pathways analysis, Policies/deployment programs, Resource assessment, Technology characterizations

177

Non-Federal Participation Federal Marketing and Joint Ventures : Administrator`s Record of Decision.  

SciTech Connect

By this Record of Decision, the Bonneville Power Administrtion (BPA) adopts the Federal Marketing and Joint Ventures alternative to guide future BPA contract negotiations involving use of the Pacific Northwest-Pacific Southwest AC Intertie (Intertie). To implement this concept, BPa intends to negotiate an array of flexible, market-oriented contracts, expanded Intertie access for non-BPA parties, efficient use of Federal Columbia River resources, and facilitation of efficient, coordinated west coast development of generating resources. Federal Marketing and Joint Ventures meets need and serves purposes to a better degree than No Action. BPA considers Federal Marketing and Joint Ventures to be the environmentally preferable alternative in that it encourages long-term coordination of west coast generating resource development and operation. This provides the greatest opportunity to decrease generation of more environmentally harmful plants which would otherwise have greater effects on air, land, and water, and to avoid construction of new generation plants.

United States. Bonneville Power Administration.

1994-04-01T23:59:59.000Z

178

Bolivia-Joint Programme on Resource Efficient and Cleaner Production (RECP)  

Open Energy Info (EERE)

Bolivia-Joint Programme on Resource Efficient and Cleaner Production (RECP) Bolivia-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Jump to: navigation, search Name Bolivia-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Agency/Company /Organization United Nations Industrial Development Organization (UNIDO), United Nations Environment Programme (UNEP) Partner Ministry of Energy, Ministry of Planning, Ministry of Finance, Ministry of Environment, Ministry of Industry Sector Climate, Energy, Water Focus Area Renewable Energy, Non-renewable Energy, Agriculture, Economic Development, Goods and Materials, Industry, People and Policy, Water Conservation Topics Background analysis, Co-benefits assessment, - Environmental and Biodiversity, - Health, - Macroeconomic, Finance, GHG inventory, Implementation, Low emission development planning, -LEDS, -NAMA, -Roadmap, -TNA, Market analysis, Pathways analysis, Policies/deployment programs, Resource assessment, Technology characterizations

179

Lebanon-Joint Programme on Resource Efficient and Cleaner Production (RECP)  

Open Energy Info (EERE)

Lebanon-Joint Programme on Resource Efficient and Cleaner Production (RECP) Lebanon-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Jump to: navigation, search Name Lebanon-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Agency/Company /Organization United Nations Industrial Development Organization (UNIDO), United Nations Environment Programme (UNEP) Partner Ministry of Energy, Ministry of Planning, Ministry of Finance, Ministry of Environment, Ministry of Industry Sector Climate, Energy, Water Focus Area Renewable Energy, Non-renewable Energy, Agriculture, Economic Development, Goods and Materials, Industry, People and Policy, Water Conservation Topics Background analysis, Co-benefits assessment, - Environmental and Biodiversity, - Health, - Macroeconomic, Finance, GHG inventory, Implementation, Low emission development planning, -LEDS, -NAMA, -Roadmap, -TNA, Market analysis, Pathways analysis, Policies/deployment programs, Resource assessment, Technology characterizations

180

Romania-Joint Programme on Resource Efficient and Cleaner Production (RECP)  

Open Energy Info (EERE)

Romania-Joint Programme on Resource Efficient and Cleaner Production (RECP) Romania-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Jump to: navigation, search Name Romania-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Agency/Company /Organization United Nations Industrial Development Organization (UNIDO), United Nations Environment Programme (UNEP) Partner Ministry of Energy, Ministry of Planning, Ministry of Finance, Ministry of Environment, Ministry of Industry Sector Climate, Energy, Water Focus Area Renewable Energy, Non-renewable Energy, Agriculture, Economic Development, Goods and Materials, Industry, People and Policy, Water Conservation Topics Background analysis, Co-benefits assessment, - Environmental and Biodiversity, - Health, - Macroeconomic, Finance, GHG inventory, Implementation, Low emission development planning, -LEDS, -NAMA, -Roadmap, -TNA, Market analysis, Pathways analysis, Policies/deployment programs, Resource assessment, Technology characterizations

Note: This page contains sample records for the topic "joint implementation kyoto" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

US - Brazil Binational Energy Working Group Joint Action Plan...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

US - Brazil Binational Energy Working Group Joint Action Plan US - Brazil Binational Energy Working Group Joint Action Plan brazilactionplan7202010.pdf More Documents &...

182

Joint Maintenance Status Report of Potomac Electric Power Company...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Joint Maintenance Status Report of Potomac Electric Power Company amd PJM Interconnection, LLC Joint Maintenance Status Report of Potomac Electric Power Company amd PJM...

183

National Report Joint Convention on the Safety of Spent Fuel...  

Office of Environmental Management (EM)

National Report Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management National Report Joint Convention on the Safety of Spent...

184

Fifth National Report for the Joint Convention on the Safety...  

Energy Savers (EERE)

Fifth National Report for the Joint Convention on the Safety of Spent Fuel Management and the Safety of Radioactive Waste Management Fifth National Report for the Joint Convention...

185

Joint Institute for Neutron Sciences | ornl.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Joint Institute for Neutron Sciences SHARE Joint Institute for Neutron Sciences JINS is located on Chestnut Ridge within the 80-acre SNS site, part of Oak Ridge National...

186

Joint inversion of electrical and seismic data for Fracture char...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Joint inversion of electrical and seismic data for Fracture char. and Imaging of Fluid Flow in Geothermal Systems Joint inversion of electrical and seismic data for Fracture char....

187

United States and Japan Sign Joint Nuclear Energy Action Plan...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Japan Sign Joint Nuclear Energy Action Plan to Promote Nuclear Energy Cooperation United States and Japan Sign Joint Nuclear Energy Action Plan to Promote Nuclear Energy...

188

United States -Japan Joint Nuclear Energy Action Plan | Department...  

Energy Savers (EERE)

United States -Japan Joint Nuclear Energy Action Plan United States -Japan Joint Nuclear Energy Action Plan President Bush of the United States and Prime Minister Koizumi of Japan...

189

United States and France Sign Joint Statement on Civil Liability...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

the Joint Statement by U.S. Secretary of Energy, Ernest Moniz, and French Minister of Ecology, Sustainable Development, and Energy, Philippe Martin. "The signing of this joint...

190

International Power Girasolar joint company | Open Energy Information  

Open Energy Info (EERE)

joint company Sector: Solar Product: Joint venture announced between US IPWG and Netherlands-headquartered Girasolar, to develop utility-scale solar projects. References:...

191

INSPECTION OF FUSION JOINTS IN PLASTIC PIPE  

SciTech Connect

The standard method of joining plastic pipe in the field is the butt fusion process. As in any pipeline application, joint quality greatly affects overall operational safety of the system. Currently no simple, reliable, cost effective method of assessing the quality of fusion joints in the field exists. Visual examination and pressure testing are current non-destructive approaches, which do not provide any assurance about the long-term pipeline performance. This project will develop, demonstrate, and validate an in-situ non-destructive inspection method for butt fusion joints in gas distribution plastic pipelines. The inspection system will include a laser based image-recognition system that will automatically generate and interpret digital images of pipe joints and assign them a pass/fail rating, which eliminates operator bias in evaluating joint quality. A Weld Zone Inspection Method (WZIM) is being developed in which local heat is applied to the joint region to relax the residual stresses formed by the original joining operation and reveal the surface condition of the joint. In cases where the joint is not formed under optimal conditions, and the intermolecular forces between contacting surfaces are not strong enough, the relaxation of macromolecules in the surface layer causes the material to pull back, revealing a fusion line. If the joint is sound, the bond line image does not develop. To establish initial feasibility of the approach, welds were performed under standard and non-standard conditions. These welds were subjected to the WZIM and tensile testing. There appears to be a direct correlation between the WZIM and tensile testing results. Although WZIM appears to be more sensitive than tensile testing can verify, the approach appears valid.

Alex Savitski; Connie Reichert; John Coffey

2004-07-13T23:59:59.000Z

192

Joint Electrical Utilities (Iowa) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Joint Electrical Utilities (Iowa) Joint Electrical Utilities (Iowa) Joint Electrical Utilities (Iowa) < Back Eligibility Investor-Owned Utility Local Government Municipal/Public Utility Rural Electric Cooperative Tribal Government Utility Savings Category Alternative Fuel Vehicles Hydrogen & Fuel Cells Buying & Making Electricity Water Home Weatherization Solar Wind Program Info State Iowa Program Type Environmental Regulations Provider Iowa Utilities Board Cities may establish utilities to acquire existing electric generating facilities or distribution systems. Acquisition, in this statute, is defined as city involvement, and includes purchase, lease, construction, reconstruction, extension, remodeling, improvement, repair, and equipping of the facility. This chapter does not limit the powers or authority of

193

PICs Implementation Plan  

NLE Websites -- All DOE Office Websites (Extended Search)

WIPP 04-2301 WIPP 04-2301 Passive Institutional Controls Implementation Plan August 19, 2004 United States Department of Energy Waste Isolation Pilot Plant Carlsbad Field Office Carlsbad, New Mexico DOE/WIPP 04-2301 Passive Institutional Controls Implementation Plan Waste Isolation Pilot Plant Carlsbad, New Mexico August 19, 2004 Prepared for: Washington Regulatory and Environmental Services an affiliate of Washington TRU Solutions, LLC P.O. Box 2078 Carlsbad, New Mexico 88221 Prepared by: John Hart and Associates, P.A. 2815 Candelaria Road, N.W. Albuquerque, New Mexico 87107 (505) 344-7868 DOE/WIPP 04-2301 i Table of Contents List of Tables .....................................................................................................................ii

194

Implementing the National Broadband  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Type text] Type text] Response to Request for Information from the Department of Energy: Implementing the National Broadband Plan by Empowering Consumers and the Smart Grid: Data Access, Third Party Use, and Privacy [FR Doc. 2010-11127] July 12, 2010 EnerNOC Page 2 of 8 EnerNOC, Inc. ("EnerNOC") is pleased to provide these comments to the Department of Energy in response to the Request for Information "Implementing the National Broadband Plan by Empowering Consumers and the Smart Grid: Data Access, Third Party Use, and Privacy." EnerNOC is a provider of demand response and energy efficiency solutions to utilities, Independent

195

Permanent Markers Implementation Plan  

NLE Websites -- All DOE Office Websites (Extended Search)

WIPP 04-3302 WIPP 04-3302 Permanent Markers Implementation Plan August 19, 2004 United States Department of Energy Waste Isolation Pilot Plant Carlsbad Field Office Carlsbad, New Mexico DOE/WIPP 04-3302 ii Permanent Markers Implementation Plan Waste Isolation Pilot Plant Carlsbad, New Mexico August 19, 2004 Prepared for: Washington Regulatory and Environmental Services an affiliate of Washington TRU Solutions, LLC P.O. Box 2078 Carlsbad, New Mexico 88221 Prepared by: John Hart and Associates, P.A. 2815 Candelaria Road, N.W. Albuquerque, New Mexico 87107 (505) 344-7868 DOE/WIPP 04-3302 iii Table of Contents Table of Contents.................................................................................................

196

Environmental protection implementation plan  

SciTech Connect

This Environmental Protection Implementation Plan is intended to ensure that the environmental program objectives of Department of Energy Order 5400.1 are achieved at SNL/California. This document states SNL/California`s commitment to conduct its operations in an environmentally safe and responsible manner. The Environmental Protection Implementation Plan helps management and staff comply with applicable environmental responsibilities. SNL is committed to operating in full compliance with the letter and spirit of applicable environmental laws, regulations, and standards. Furthermore, SNL/California strives to go beyond compliance with legal requirements by making every effort practical to reduce impacts to the environment to levels as low as reasonably achievable.

Holland, R.C.

1998-03-01T23:59:59.000Z

197

Environmental Protection Implementation Plan  

SciTech Connect

This Environmental Protection Implementation Plan is intended to ensure that the environmental program objectives of Department of Energy Order 5400.1 are achieved at SNL/California. This document states SNL/California`s commitment to conduct its operations in an environmentally safe and responsible manner. The Environmental Protection Implementation Plan helps management and staff comply with applicable environmental responsibilities. This report focuses on the following: notification of environmental occurrences; general planning and reporting; special programs and plans; environmental monitoring program; and quality assurance and data verification.

Brekke, D.D.

1995-11-01T23:59:59.000Z

198

Nome Joint Utility Systems | Open Energy Information  

Open Energy Info (EERE)

Joint Utility Systems Joint Utility Systems Jump to: navigation, search Name Nome Joint Utility Systems Place Alaska Utility Id 13642 Utility Location Yes Ownership M NERC Location AK Operates Generating Plant Yes Activity Generation Yes Activity Transmission Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Electrical Charge Residential Power Cost Equalization Average Rates Residential: $0.3600/kWh Commercial: $0.3310/kWh References ↑ "EIA Form EIA-861 Final Data File for 2010 - File1_a" Retrieved from "http://en.openei.org/w/index.php?title=Nome_Joint_Utility_Systems&oldid=411195

199

Joint Genome Institute (JGI) Projects at NERSC  

NLE Websites -- All DOE Office Websites (Extended Search)

Joint Genome Institute Joint Genome Institute (JGI) Joint Genome Institute (JGI) nicole-illumina-flowcell.jpg Key Challenges: Ensuring that there is a robust computational infrastructure for managing, storing and gleaning scientific insights from the torrent of data that constantly flows from the advanced sequencing platforms at the Department of Energy Joint Genome Institute (JGI). JGI sequencing capacity exceeds 40 billion DNA base pairs per year and is growing at a rate that exceeds computer hardware improvements, with exponential increases in computation and storage needed. JGI will generate about 1 petabyte of data in their first year as a NERSC partner; this is expected to double each year. Why it Matters: JGI is the primary production sequencing facility for the DOE. By revealing the genetic blueprint and fundamental principles that

200

Static strength assessment of cracked tubular joints  

SciTech Connect

Results from a number of investigations on the ultimate capacity of cracked tubular joints are available. A comparison of the results with predictions from parametric equations for the static strength capacity of intact joints indicates that the presence of a defect can have a significant influence on the joint capacity. The data, which were obtained from experiments on small-scale and large-scale tests and numerical analyses, are assessed in this paper. A range of tubular joint geometries containing surface and through-thickness cracks are considered. The data are assessed with respect to characteristic static strength predictions and fracture mechanics predictions based on the use of the Failure Assessment Diagram approach. Finally, an outline of current research in this area is presented.

Stacey, A.; Sharp, J.V. [Health and Safety Executive, London (United Kingdom). Offshore Safety Div.; Nichols, N.W. [AEA Technology, Culham (United Kingdom)

1996-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "joint implementation kyoto" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Sandia National Laboratories: Joint Hire Increases Materials...  

NLE Websites -- All DOE Office Websites (Extended Search)

Science Collaboration for Sandia, UNM Sandia Funded to Model Power Pods for Utility-Scale Wave-Energy Converter Mapping Water Availability in the Western US Joint Hire Increases...

202

Joint Genome Institute's Automation Approach and History  

SciTech Connect

Department of Energy/Joint Genome Institute (DOE/JGI) collaborates with DOE national laboratories and community users, to advance genome science in support of the DOE missions of clean bio-energy, carbon cycling, and bioremediation.

Roberts, Simon

2006-07-05T23:59:59.000Z

203

Joint Actinide Shock Physics Experimental Research - JASPER  

ScienceCinema (OSTI)

Commonly known as JASPER the Joint Actinide Shock Physics Experimental Research facility is a two stage light gas gun used to study the behavior of plutonium and other materials under high pressures, temperatures, and strain rates.

None

2015-01-09T23:59:59.000Z

204

Joint Actinide Shock Physics Experimental Research - JASPER  

SciTech Connect

Commonly known as JASPER the Joint Actinide Shock Physics Experimental Research facility is a two stage light gas gun used to study the behavior of plutonium and other materials under high pressures, temperatures, and strain rates.

None

2014-10-31T23:59:59.000Z

205

Climate Leaders Joint Venture | Open Energy Information  

Open Energy Info (EERE)

Leaders Joint Venture Leaders Joint Venture Jump to: navigation, search Name Climate Leaders' Joint Venture Place Dallas, Texas Product Tudor Investment and Camco International have partnered to create Climate Leaders' Joint Venture. They will have inital working capital of USD 10m, with Camco owning 60%. Coordinates 32.778155°, -96.795404° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":32.778155,"lon":-96.795404,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

206

Safety Monitor Joint Working Group (JWG) Tour  

NLE Websites -- All DOE Office Websites (Extended Search)

4 th Meeting of the Joint Working Group of the U.S.-Japan Coordinating Committee of Fusion Energy on Safety in Inter-Institutional Collaborations (U.S.-Japan Safety Monitoring...

207

Joint Programme on Resource Efficient and Cleaner Production (RECP) in  

Open Energy Info (EERE)

Programme on Resource Efficient and Cleaner Production (RECP) in Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Jump to: navigation, search Name Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and Transition Countries Agency/Company /Organization United Nations Industrial Development Organization (UNIDO), United Nations Environment Programme (UNEP) Partner Ministry of Energy, Ministry of Planning, Ministry of Finance, Ministry of Environment, Ministry of Industry Sector Climate, Energy, Water Focus Area Renewable Energy, Non-renewable Energy, Agriculture, Economic Development, Goods and Materials, Industry, People and Policy, Water Conservation Topics Background analysis, Co-benefits assessment, - Environmental and Biodiversity, - Health, - Macroeconomic, Finance, GHG inventory, Implementation, Low emission development planning, -LEDS, -NAMA, -Roadmap, -TNA, Market analysis, Pathways analysis, Policies/deployment programs, Resource assessment, Technology characterizations

208

CHARACTERIZATION OF DAMPING IN BOLTED LAP JOINTS  

SciTech Connect

The dynamic response of a jointed beam was measured in laboratory experiments. The data were analyzed and the system was mathematically modeled to establish plausible representations of joint damping behavior. Damping is examined in an approximate, local linear framework using log decrement and half power bandwidth approaches. in addition, damping is modeled in a nonlinear framework using a hybrid surface irregularities model that employs a bristles-construct. Experimental and analytical results are presented.

C. MALONEY; D. PEAIRS; ET AL

2000-08-01T23:59:59.000Z

209

Feature selection for automatic solder joint inspection  

E-Print Network (OSTI)

FEATURE SELECTION FOR AUTOMATIC SOLDER JOINT INSPECTION A Thesis CHENG-CHENG LEE Submitted to the Graduate College of Texas AiVM University in partial fulfillment of the requirement for the degree of MASTER OF SCIENCE August 1987 Major... Subject: Mechanical Engineering FEATURE SELECTION FOR AUTOMATIC SOLDER JOINT INSPECTION A Thesis by CHENG-CHENG LEE Approved as to style and content by: Morris Driels (Chairman of Committee) Norman Gris ld (Member) i(?? Oren Xlasor'i (kfembef...

Lee, Cheng-Cheng

2012-06-07T23:59:59.000Z

210

Optimization of the TEM-Model Co — Funding and Joint International Emissions Trading  

Science Journals Connector (OSTI)

The conferences of Rio de Janeiro 1992 and Kyoto 1997 demand for new economic instruments which have a focus on environmental protection in the macro and micro economy. An important economic tool being part of...

S. Pickl

2001-01-01T23:59:59.000Z

211

Transition Implementation Guide  

Directives, Delegations, and Requirements

This Guide was prepared to aid in the development, planning, and implementation of requirements and activities during the transition phase at Department of Energy (DOE) facilities that have been declared or are forecast to become excess to any future mission requirements.

2001-04-24T23:59:59.000Z

212

Plans, Implementation, and Results  

Energy.gov (U.S. Department of Energy (DOE))

The Bioenergy Technologies Office carries out technology research, development, and deployment through an ongoing process of planning and analysis, implementation, and review. This Web page includes links to documents that support and document the program management process, and the results and public benefits that derive from it.

213

Plans, Implementation, and Results Glossary  

Office of Energy Efficiency and Renewable Energy (EERE)

Definitions of the office overview, plans, implementation, and results document and website categories are provided below:

214

Design and implementation of an expressive gesture model for a humanoid robot  

E-Print Network (OSTI)

Design and implementation of an expressive gesture model for a humanoid robot Quoc Anh Le Telecom-- We aim at equipping the humanoid robot NAO with the capacity of performing expressive communicative as robot joint values and sent to the robot in order to execute the hand-arm movements. The robot has

Paris-Sud XI, Université de

215

BJTU'09 Defeng Sun/NUS 1 An Implementable Proximal Point Algorithmic  

E-Print Network (OSTI)

BJTU'09 Defeng Sun/NUS 1 ' & $ % An Implementable Proximal Point Algorithmic Framework for Nuclear Norm Minimization Defeng Sun Department of Mathematics National University of Singapore July 3, 2009 Joint work with Yong-Jin Liu and Kim-Chuan Toh #12;BJTU'09 Defeng Sun/NUS 2 ' & $ % Let n1Ă?n2

Sun, Defeng

216

Blackout Final Implementation Report  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Report Report on the Implementation of the Task Force Recommendations U.S.-Canada Power System Outage Task Force Natural Resources Canada U.S. Department of Energy September 2006 Final Report on the Implementation of the Task Force Recommendations U.S.-Canada Power System Outage Task Force September 2006 Natural Resources Canada U.S. Department of Energy Acknowledgments This document was prepared by staff of Natural Resources Canada and the U.S. Department of Energy. The principal contributors are listed in Annex 1. The staff wish to acknowledge the contributions of the U.S. Federal Energy Regulatory Commission and the Ontario Ministry of Energy. The staff also wish to acknowl- edge the support and cooperation of the North American Electric Reliability Council and, in particular, of Mr. David Nevius, Senior Vice President and Direc- tor of Reliability Assessment & Performance

217

Implementation of Sustainability at  

E-Print Network (OSTI)

0 Assessing Implementation of Sustainability at UiO GrĂžnt UiO S u s t a i n a b i l i t y i n R e sustainability commitment among universities and proposed Best Green University Practices in 2010. It presents the current status of UiO Environmental Sustainability. #12;1 If you cannot measure it, you cannot manage it

Johansen, Tom Henning

218

Handbook on dynamics of jointed structures.  

SciTech Connect

The problem of understanding and modeling the complicated physics underlying the action and response of the interfaces in typical structures under dynamic loading conditions has occupied researchers for many decades. This handbook presents an integrated approach to the goal of dynamic modeling of typical jointed structures, beginning with a mathematical assessment of experimental or simulation data, development of constitutive models to account for load histories to deformation, establishment of kinematic models coupling to the continuum models, and application of finite element analysis leading to dynamic structural simulation. In addition, formulations are discussed to mitigate the very short simulation time steps that appear to be required in numerical simulation for problems such as this. This handbook satisfies the commitment to DOE that Sandia will develop the technical content and write a Joints Handbook. The content will include: (1) Methods for characterizing the nonlinear stiffness and energy dissipation for typical joints used in mechanical systems and components. (2) The methodology will include practical guidance on experiments, and reduced order models that can be used to characterize joint behavior. (3) Examples for typical bolted and screw joints will be provided.

Ames, Nicoli M.; Lauffer, James P.; Jew, Michael D.; Segalman, Daniel Joseph; Gregory, Danny Lynn; Starr, Michael James; Resor, Brian Ray

2009-07-01T23:59:59.000Z

219

Modeling and implementation of solder-activated joints for single actuator, centimeter-scale robotic mechanisms  

E-Print Network (OSTI)

This thesis explains when, and why, solder-based phase change materials (PCMs) are best-suited as a means to modify a robotic mechanism's kinematic and elastomechanic behavior. The preceding refers to mechanisms that possess ...

Telleria, Maria J

2010-01-01T23:59:59.000Z

220

JOINT IMPLEMENTATION INITIATIVES IN SOUTH AFRICA: A CASE STUDY OF TWO ENERGY-EFFICIENCY PROJECTS  

E-Print Network (OSTI)

This document was prepared as an account of work sponsored by the United States Government. While this document is believed to contain correct information, neither the United States Government nor any agency thereof, nor The Regents of the University of California, nor any of their employees, makes any warranty, express or implied, or assumes any legal responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by its trade name, trademark, manufacturer, or otherwise, does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof, or The Regents of the University of California. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof, or

Ernest Orlando Lawrence; Clive Van Horen; Gillian Simmonds; Gretchen Parker; Clive Van Horen; Gillian Simmonds; Gretchen Parker

1998-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "joint implementation kyoto" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Implementing Motor Decision Plans  

E-Print Network (OSTI)

Implementing Motor Decision Plans R. Neal Elliott, Ph.D., P.E., Senior Associate American Council for an Energy-Efficient Economy (ACEEE), Washington, DC Abstract The first step to reducing energy costs and increasing reliability in motors... is chosen with limited regard to the short or long-tenn cost. This paper discusses how to develop a plan appropriate to the needs of a particular facility. Introduction In most cases, the opportunity to install a more efficient motor isO available...

Elliott, R. N.

222

Joint measurability, steering and entropic uncertainty  

E-Print Network (OSTI)

The notion of incompatibility of measurements in quantum theory is in stark contrast with the corresponding classical perspective, where all physical observables are jointly measurable. It is of interest to examine if the results of two or more measurements in the quantum scenario can be perceived from a classical point of view or they still exhibit non-classical features. Clearly, commuting observables can be measured jointly using projective measurements and their statistical outcomes can be discerned classically. However, such simple minded association of compatibility of measurements with commutativity turns out to be limited in an extended framework, where the usual notion of sharp projective valued measurements of self adjoint observables gets broadened to include unsharp measurements of generalized observables constituting positive operator valued measures (POVM). There is a surge of research activity recently towards gaining new physical insights on the emergence of classical behavior via joint measurability of unsharp observables. Here, we explore the entropic uncertainty relation for a pair of discrete observables (of Alice's system) when an entangled quantum memory of Bob is restricted to record outcomes of jointly measurable POVMs only. Within the joint measurability regime, the sum of entropies associated with Alice's measurement outcomes - conditioned by the results registered at Bob's end - are constrained to obey an entropic steering inequality. In this case, Bob's non-steerability reflects itself as his inability in predicting the outcomes of Alice's pair of non-commuting observables with better precision, even when they share an entangled state. As a further consequence, the quantum advantage envisaged for the construction of security proofs in key distribution is lost, when Bob's measurements are restricted to the joint measurability regime.

H. S. Karthik; A. R. Usha Devi; A. K. Rajagopal

2014-10-05T23:59:59.000Z

223

Pacific Northwest National Laboratory The Joint Global Change  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Pacific Northwest Pacific Northwest National Laboratory The Joint Global Change The Joint Global Change Research Institute Research Institute Nuclear Power and Stabilizing CO 2 Concentrations Jae Edmonds and Sonny Kim Nuclear Energy Research Advisory Committee Meeting April 15 and 16, 2002 Alexandria, VA Pacific Northwest National Laboratory 2 The Joint Global Change The Joint Global Change Research Institute Research Institute CLIMATE CHANGE Pacific Northwest National Laboratory 3 The Joint Global Change The Joint Global Change Research Institute Research Institute CLIMATE CHANGE Multiple gases * CO 2 (fossil fuel, land-use) * CH 4 (rice paddies, ruminant livestock, landfills, coal mining, oil and gas production, incomplete combustion) * N 2 O (nitrogen fertilizers, industrial processes, other??)

224

a 115-line MATLAB implementation  

E-Print Network (OSTI)

Apr 15, 2013 ... Alternating active-phase algorithm for multimaterial topology optimization problems -- a 115-line MATLAB implementation. Rouhollah Tavakoli ...

Rouhollah Tavakoli

2013-04-15T23:59:59.000Z

225

Addressing the Need for Alternative Transportation Fuels: The Joint BioEnergy Institute  

E-Print Network (OSTI)

Fuels: The Joint BioEnergy Institute Harvey W. Blanch †,‡,§,¶, * † Joint BioEnergy Institute, ‡ Department of Chemicalbiomass monomers. The Joint BioEnergy Institute (JBEI) is a

Blanch, Harvey

2010-01-01T23:59:59.000Z

226

Joint Inverted Indexing Kaiming He2  

E-Print Network (OSTI)

Joint Inverted Indexing Yan Xia1 Kaiming He2 Fang Wen2 Jian Sun2 1 University of Science and Technology of China 2 Microsoft Research Asia Abstract Inverted indexing is a popular non-exhaustive solution to large scale search. An inverted file is built by a quantizer such as k-means or a tree structure. It has

Bernstein, Phil

227

Jointly organised by HKU CIVIL ENGRG. DEPT.  

E-Print Network (OSTI)

SEMINAR Jointly organised by and HKU CIVIL ENGRG. DEPT. Centre for Infrastructure and Construction Industry Development THE USE OF TRENCHLESS TECHNOLOGY FOR THE IMPROVEMENT OF URBAN HABITATS by Ian, vibration, and air pollution. The frustration this causes is aggravated by the knowledge that there often

Tam, Vincent W. L.

228

Dashboards in Higher UMACRAO/WACRAO Joint  

E-Print Network (OSTI)

Dashboards in Higher Education UMACRAO/WACRAO Joint Conference November 1-3, 2006 Phil Hull-UW Madison, Office of the Registrar Jason Haverly-UW River Falls, Information Technology Services Gery informed decisions based on collected BI (business intelligence) ·Align strategies and organizational goals

Wisconsin at Madison, University of

229

Joint with application in electrochemical devices  

DOE Patents (OSTI)

A joint for use in electrochemical devices, such as solid oxide fuel cells (SOFCs), oxygen separators, and hydrogen separators, that will maintain a hermetic seal at operating temperatures of greater than 600.degree. C., despite repeated thermal cycling excess of 600.degree. C. in a hostile operating environment where one side of the joint is continuously exposed to an oxidizing atmosphere and the other side is continuously exposed to a wet reducing gas. The joint is formed of a metal part, a ceramic part, and a flexible gasket. The flexible gasket is metal, but is thinner and more flexible than the metal part. As the joint is heated and cooled, the flexible gasket is configured to flex in response to changes in the relative size of the metal part and the ceramic part brought about by differences in the coefficient of thermal expansion of the metal part and the ceramic part, such that substantially all of the tension created by the differences in the expansion and contraction of the ceramic and metal parts is absorbed and dissipated by flexing the flexible gasket.

Weil, K Scott [Richland, WA; Hardy, John S [Richland, WA

2010-09-14T23:59:59.000Z

230

Implementing the National Broadband  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Before the Before the Department of Energy Washington, D.C. 20585 In the Matter of Implementing the National Broadband Plan by Studying the Communications Requirements of Electric Utilities To Inform Federal Smart Grid Policy NBP RFI: Communications Requirements COMMENTS OF BALTIMORE GAS & ELECTRIC COMPANY I. Introduction BGE is the nation's oldest and most experienced utility company. It has met the energy needs of central Maryland for nearly 200 years. Today, it serves more than 1.2 million business and residential electric customers, and approximately 650,000 gas customers in an economically diverse, 2,300-square-mile area encompassing Baltimore City and all or part of ten central Maryland counties.

231

Implementing the National Broadband  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DAKOTA ELECTRIC ASSOCIATION DAKOTA ELECTRIC ASSOCIATION I. Introduction a. Identification/description of our company Dakota Electric Association (DEA) is an Incorporated Cooperative Association which distributes electricity to more than 100,000 members in Dakota County and surrounding areas. DEA is the second largest electric cooperative in the state of Minnesota, and is a member cooperative of Great River Energy (GRE). II. Executive Summary DEA has deployed a fully integrated IP network to 26 substation sites. An IP based network transports data information for Supervisory Control and Data Acquisition (SCADA) and Load Management systems. A private Wide Area Network (WAN) was implemented by DEA in 2001 due to lack of comprehensive coverage by major carriers. In addition to the WAN, DEA relies on commercial services to communicate with load

232

Environmental Implementation Plan  

SciTech Connect

The purpose of the Environmental Implementation Plan (EIP) is to show the current and future (five years) environmental plans from individual site organizations and divisions, as well as site environmental programs and initiatives which are designed to protect the environment and meet or exceed changing environmental/regulatory requirements. Communicating with site organizations, departments, and committees is essential in making the site's environmental-planning process work. The EIP gives the site the what, when, how, and why for environmental requirements. Through teamwork and proactive planning, a partnership for environmental excellence is formed to achieve the site vision for SRS to become the recognized model for Environmental Excellence in the Department of Energy's Nuclear Weapons Complex.

Not Available

1993-03-15T23:59:59.000Z

233

Environmental Implementation Plan  

SciTech Connect

The purpose of the Environmental Implementation Plan (EIP) is to show the current and future (five years) environmental plans from individual site organizations and divisions, as well as site environmental programs and initiatives which are designed to protect the environment and meet or exceed changing environmental/regulatory requirements. Communicating with site organizations, departments, and committees is essential in making the site`s environmental-planning process work. The EIP gives the site the what, when, how, and why for environmental requirements. Through teamwork and proactive planning, a partnership for environmental excellence is formed to achieve the site vision for SRS to become the recognized model for Environmental Excellence in the Department of Energy`s Nuclear Weapons Complex.

Not Available

1993-03-15T23:59:59.000Z

234

Foreign Obligations Implementation Status Presentation  

National Nuclear Security Administration (NNSA)

January 13, 2004 Crowne Plaza Ravinia Atlanta, January 13, 2004 Crowne Plaza Ravinia Atlanta, January 13, 2004 Crowne Plaza Ravinia Atlanta, Georgia Georgia Obligations Accounting Implementation Workshop Obligations Accounting Implementation Workshop Foreign Obligations Implementation Status Brian G. Horn U.S. Nuclear Regulatory Commission January 13, 2004 Obligations Accounting Implementation Workshop January 13, 2 Obligations Accounting Implementation Workshop January 13, 2004 Crowne Plaza Ravinia Atlanta, GA 004 Crowne Plaza Ravinia Atlanta, GA Overview of Meeting Overview of Meeting * Review how the Obligation Tracking System is working * Presentations: - Review of Government notification procedures - Establishment of the beginning Obligation Balances for sites

235

Parameter identification for joint elements in a revolute-joint detector manipulator.  

SciTech Connect

A revolute-joint robot is being developed for the spatial positioning of an x-ray detector at the Advanced Photon Source. Commercially available revolute-joint manipulators do not meet our size, positioning, or payload specifications. One idea being considered is the modification of a commercially available robot, with the goal of improving the repeatability and trajectory accuracy. Theoretical, computational, and experimental procedures are being used to (1) identify, (2) simulate the dynamics of an existing robot system using a multibody approach, and eventually (3) design an improved version, with low dynamic positioning uncertainty. A key aspect of the modeling and performance prediction is accurate stiffness and damping values for the robot joints. This paper discusses the experimental identification of the stiffness and damping parameters for one robot harmonic drive joint.

Preissner, C.; Shu, D.; Royston, T.; Experimental Facilities Division (APS); Univ. of Illinois at Chicago

2005-01-01T23:59:59.000Z

236

Fuel Cell Technologies Office: Joint Fuel Cell Bus Workshop  

NLE Websites -- All DOE Office Websites (Extended Search)

Joint Fuel Cell Bus Joint Fuel Cell Bus Workshop to someone by E-mail Share Fuel Cell Technologies Office: Joint Fuel Cell Bus Workshop on Facebook Tweet about Fuel Cell Technologies Office: Joint Fuel Cell Bus Workshop on Twitter Bookmark Fuel Cell Technologies Office: Joint Fuel Cell Bus Workshop on Google Bookmark Fuel Cell Technologies Office: Joint Fuel Cell Bus Workshop on Delicious Rank Fuel Cell Technologies Office: Joint Fuel Cell Bus Workshop on Digg Find More places to share Fuel Cell Technologies Office: Joint Fuel Cell Bus Workshop on AddThis.com... Publications Program Publications Technical Publications Educational Publications Newsletter Program Presentations Multimedia Conferences & Meetings Annual Merit Review Proceedings Workshop & Meeting Proceedings Webinars

237

Third National Report for the Joint Convention on the Safety...  

Office of Environmental Management (EM)

for the Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management Third National Report for the Joint Convention on the Safety...

238

Second National Report for the Joint Convention on the Safety...  

Office of Environmental Management (EM)

for the Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management Second National Report for the Joint Convention on the Safety...

239

Fourth National Report for the Joint Convention on the Safety...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

for the Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management Fourth National Report for the Joint Convention on the Safety...

240

Alternative Fuels Data Center: Joint Use of Government Fueling  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Joint Use of Joint Use of Government Fueling Infrastructure to someone by E-mail Share Alternative Fuels Data Center: Joint Use of Government Fueling Infrastructure on Facebook Tweet about Alternative Fuels Data Center: Joint Use of Government Fueling Infrastructure on Twitter Bookmark Alternative Fuels Data Center: Joint Use of Government Fueling Infrastructure on Google Bookmark Alternative Fuels Data Center: Joint Use of Government Fueling Infrastructure on Delicious Rank Alternative Fuels Data Center: Joint Use of Government Fueling Infrastructure on Digg Find More places to share Alternative Fuels Data Center: Joint Use of Government Fueling Infrastructure on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type

Note: This page contains sample records for the topic "joint implementation kyoto" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

2014 SAME Mid-Atlantic Regional Joint Engineer Training Symposium...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

SAME Mid-Atlantic Regional Joint Engineer Training Symposium (JETS) 2014 SAME Mid-Atlantic Regional Joint Engineer Training Symposium (JETS) November 12, 2014 8:00AM EST to...

242

PART 1021-NATIONAL ENVIRONMENTAL POLICY ACT IMPLEMENTING PROCEDURES  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Effective Nov 14, 2011 1 Effective Nov 14, 2011 1 PART 1021-NATIONAL ENVIRONMENTAL POLICY ACT IMPLEMENTING PROCEDURES Subpart A-General Sec. 1021.100 Purpose. 1021.101 Policy. 1021.102 Applicability. 1021.103 Adoption of CEQ NEPA regulations. 1021.104 Definitions. 1021.105 Oversight of Agency NEPA activities. Subpart B-DOE Decisionmaking 1021.200 DOE planning. 1021.210 DOE decisionmaking. 1021.211 Interim actions: Limitations on actions during the NEPA process. 1021.212 Research, development, demonstration, and testing. 1021.213 Rulemaking. 1021.214 Adjudicatory proceedings. 1021.215 Applicant process. 1021.216 Procurement, financial assistance, and joint ventures. Subpart C-Implementing Procedures 1021.300 General requirements. 1021.301 Agency review and public participation.

243

10 CFR 1021 -- National Environmental Policy Act Implementing Procedures  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1021 -- NATIONAL 1021 -- NATIONAL ENVIRONMENTAL POLICY ACT IMPLEMENTING PROCEDURES Subpart A -- General Sec. 1021.100 Purpose. 1021.101 Policy. 1021.102 Applicability. 1021.103 Adoption of CEQ NEPA regulations. 1021.104 Definitions. 1021.105 Oversight of Agency NEPA activities. Subpart B -- DOE Decisionmaking 1021.200 DOE planning. 1021.210 DOE decisionmaking. 1021.211 Interim actions: Limitations on actions during the NEPA process. 1021.212 Research, development, demonstration, and testing. 1021.213 Rulemaking. 1021.214 Adjudicatory proceedings. 1021.215 Applicant process. 1021.216 Procurement, financial assistance, and joint ventures. Subpart C -- Implementing Procedures 1021.300 General requirements. 1021.301 Agency review and public participation. 1021.310 Environmental impact statements.

244

Joint Fuel Cell Technologies and Advanced Manufacturing Webinar  

Energy.gov (U.S. Department of Energy (DOE))

Presentation slides from the joint Fuel Cell Technologies Office and Advanced Manufacturing Office webinar held November 20, 2012.

245

SPIDERS Joint Capability Technology Demonstration Industry Day Presentations  

Energy.gov (U.S. Department of Energy (DOE))

Presentations from the SPIDERS Joint Capability Technology Demonstration Industry Day, which occurred on April 22, 2014, at Fort Carson, Colorado.

246

Microbial Genomics Data from the DOE Joint Genome Institute (JGI)  

DOE Data Explorer (OSTI)

As of March 2008, The Joint Genome Institute has released 296 Prokaryotic microbial sites, with 216 in finished status.

247

Development and test of the ITER conductor joints  

SciTech Connect

Joints for the ITER superconducting Central Solenoid should perform in rapidly varying magnetic field with low losses and low DC resistance. This paper describes the design of the ITER joint and presents its assembly process. Two joints were built and tested at the PTF facility at MIT. Test results are presented, losses in transverse and parallel field and the DC performance are discussed. The developed joint demonstrates sufficient margin for baseline ITER operating scenarios.

Martovetsky, N., LLNL

1998-05-14T23:59:59.000Z

248

Environmental Implementation Plan  

SciTech Connect

The Environmental Implementation Plan (EIP) is a dynamic long-range environmental-protection plan for SRS. The EIP communicates the current and future (five year) environmental plans from individual organizations and divisions as well as site environmental initiatives which are designed to protect the environment and meet or exceed compliance with changing environmental/ regulatory requirements. Communication with all site organizations is essential for making the site environmental planning process work. Demonstrating environmental excellence is a high priority embodied in DOE and WSRC policy. Because of your support and participation in the three EIP initiatives; Reflections, Sectional Revision, and Integrated Planning, improvements are being made to the EIP and SRS environmental protection programs. I appreciate the ``Partnership in Environmental Excellence`` formed by the environmental coordinators and professionals who work daily toward our goal of compliance and environmental excellence. I look forward to seeing continued success and improvement in our environmental protection programs through combined efforts of all site organizations to protect our employees, the public health, and the environment. Together, we will achieve our site vision for SRS to be the recognized model for Environmental Excellence in the DOE Nuclear Weapons Complex.

Not Available

1994-02-01T23:59:59.000Z

249

EPA speeds technology implementation  

SciTech Connect

Common barriers block the use of innovative remediation technologies. The Innovative Treatment Remediation Demonstration (ITRD) Program at the US Department of Energy`s (DOE`s) Sandia National Laboratories was initiated in 1993 in cooperation with the US Environmental Protection Agency`s (EPA`s) Technology Innovation Office in an attempt to reduce these barriers and accelerate the implementation of innovative remediation technologies. The innovative technologies considered for evaluation by the ITRD program lack the cost and performance information that would otherwise permit their full consideration as remedial alternatives. These technologies have often shown promise in pilot-scale applications but have limited full-scale data. Some examples in this category include: bioremediation, in situ dynamic stripping, soil washing and soil flushing, solvent and surfactant extraction and chemical treatment, in situ passive treatment, and advanced physical separation techniques. Currently, three ITRD projects are under way. ITRD sites are generally small, and most are characterized sites already scheduled for remediation. Thus, each project can be initiated quickly; additional program costs are minimized; and overall site remediation is accelerated. ITRD projects tend to target sites with typical soil and groundwater contamination problems. Contaminants at such sites include chlorinated solvents and petroleum products; pesticides, polychlorinated biphenyls (PCBs), and dioxins; heavy metals; explosives; and complex or multiconstituent contamination. The paper describes the activities at these three projects located at Pinellas, Mound Laboratory, and Fernald.

Hightower, M.M. [Sandia National Labs., Albuquerque, NM (United States). Environmental Programs Center

1996-04-01T23:59:59.000Z

250

TRUPACT-1 implementation plan  

SciTech Connect

TRUPACT-1, the TRansUranic PACkage Transporter is a packaging designed to transport defense contact handled transuranic (CH-TRU) waste from generating and interim TRU waste storage facilities to the Waste Isolation Pilot Plant (WIPP). Prior to fabrication and procurement of a full fleet, an initial design (TRUPACT-1) will be introduced to the defense TRU waste complex through use in an operational prototype fleet which will consist of Units 1, 2, and 3. In an effort to provide a relatively smooth introduction of the TRUPACT-1, the TRUPACT Technical Team (TTT) has developed the following implementation plan. The plan provides detailed information on user handling opportunities, schedules, equipment, responsibilities, reporting and data collection activities to be performed. The intent of this document is to provide users of the TRUPACT-1 with a guidance document, complete with references, that will allow the smooth introduction of this new transportation system by providing the information necessary for collecting operational, performance and cost data. These data will be used in modeling and full fleet design and procurement activities. In addition, these data will help fine tune procedures in the inspection and maintenance document and the operational document. Additional objectives of this plan are to aid in the establishment of site operational, inspection and maintenance procedures as well as training of site operators and briefing state and local officials.

Hurley, J.D.; Tappen, J.J. (Westinghouse Electric Corp., Albuquerque, NM (United States). Joint Integration Office); Christensen, D.S. (USDOE Joint Integration Office, Albuquerque, NM (United States)) (eds.)

1985-09-01T23:59:59.000Z

251

Preparing for Project Implementation: Providing Resources for...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Project Implementation: Providing Resources for Implementation Save Energy Now LEADER Web Conference Project Implementation Seminar Series Save Energy Now LEADER Web Conference...

252

KYOTO UNIVERSITYKYOTO UNIVERSITY Kyoto University Financial Report 2013 09  

E-Print Network (OSTI)

Report 201312 #12; 30 11 13AUN 2ASEAN+3 Educational Forum and Young Speakers Contest3 AUNASEAN University Network21 ASEAN+3 4 ASEAN+3 24 ...... 3,027 ...... 3,447 2451 ......13,403 ...... 9 Century Collections Online 1 KULINE 13AUN2 ASEAN+3 Educational Forum and Young Speakers Contest 6

Takada, Shoji

253

Conduct of operations implementation plan  

SciTech Connect

This implementation plan describes the process and provides information and schedules that are necessary to implement and comply with the Department of Energy (DOE) Order 5480.19, {open_quotes}Conduct of Operations{close_quotes} (CoOp). This plan applies to all Pinellas Plant operations and personnel. Generally, this Plan discusses how DOE Order 5480.19 will be implemented at the Pinellas Plant.

Anderson, C.K.; Hall, R.L.

1991-02-20T23:59:59.000Z

254

Joint Global Change Research Institute | Open Energy Information  

Open Energy Info (EERE)

Global Change Research Institute Global Change Research Institute Jump to: navigation, search Logo: Joint Global Change Research Institute Name Joint Global Change Research Institute Agency/Company /Organization Pacific Northwest National Laboratory Sector Energy, Land Focus Area Energy Efficiency Topics Policies/deployment programs, Resource assessment, Pathways analysis Website http://www.globalchange.umd.ed References Global Change Research Institute [1] Abstract The Joint Global Change Research Institute (JGCRI) houses an interdisciplinary team dedicated to understanding the problems of global climate change and their potential solutions. Joint Institute staff bring decades of experience and expertise to bear in science, technology, economics, and policy. "The Joint Global Change Research Institute (JGCRI) houses an

255

U.S.-Sweden Joint PHEV Research  

NLE Websites -- All DOE Office Websites (Extended Search)

to jointly develop new plug-in to jointly develop new plug-in hybrid vehicle (PHEV) technology and accelerate its consumer acceptance and commercialization, the U.S. Department of Energy (DOE) and Sweden signed a Memorandum of Understanding (MOU) in July for a one year, $1 million cost-sharing agreement to be equally funded by DOE and the Swedish Energy Agency. Through contacts developed over many years conducting international technology assessment for the Department of Energy, Argonne National Laboratory initiated the MOU, which was signed by DOE Assistant Secretary Alexander Karsner and Director General of the Swedish Energy Agency Tomas KĂ„berger, on the Swedish island of Gotland. The ceremony included comments by Swedish Deputy Prime Minister Maud Olofsson and U.S. Ambassador to Sweden Michael

256

Ten Years Later: A Joint Library Evolves  

Science Journals Connector (OSTI)

Abstract In 2003, a unique joint library was created. A partnership between the San Jose Public Library system and San Jose State University, the Dr. Martin Luther King, Jr. Library serves a city population of more than a million and a campus population of over 30,000 students. With different patrons and different missions, bringing the two library cultures and functions together presented many challenges, but the library today is a vital, innovative space for learning. In the ten years since its opening, however, the cost savings envisioned when the library was created have not been realized. Also, the partnership originally presented in the library's organizational structure has undergone alterations. This restructuring was driven by changes in funding, staffing, and patron needs. Despite this organizational evolution, the King Library still provides a richer resource to its communities than either partner could have provided alone and can serve as a model to other communities considering the creation of a joint library.

Ann Agee

2014-01-01T23:59:59.000Z

257

Financing Program Implementation Process Flow  

Energy.gov (U.S. Department of Energy (DOE))

The implementation process flow for financing with two models: a generic option for primary markets and a conceptual option for secondary markets.

258

Pipeline safety joint eliminates need for divers  

SciTech Connect

The Sea-Hook coupling is a diverless pressure-compensated pipeline safety joint designed to protect the pipe from damage by excessive physical loads. The coupling provides a predetermined weak point in the line that will cause a controlled separation when the line is exposed to strong wave action or dragging anchors. Moreover, it offers prepressurized remote lockout protection, metal seal integrity, no hand-up separation, enclosed bolting, optimal manual lockout, and no springs or shear rings.

Not Available

1983-04-01T23:59:59.000Z

259

Comparison of Joint Modeling Approaches Including Eulerian Sliding Interfaces  

SciTech Connect

Accurate representation of discontinuities such as joints and faults is a key ingredient for high fidelity modeling of shock propagation in geologic media. The following study was done to improve treatment of discontinuities (joints) in the Eulerian hydrocode GEODYN (Lomov and Liu 2005). Lagrangian methods with conforming meshes and explicit inclusion of joints in the geologic model are well suited for such an analysis. Unfortunately, current meshing tools are unable to automatically generate adequate hexahedral meshes for large numbers of irregular polyhedra. Another concern is that joint stiffness in such explicit computations requires significantly reduced time steps, with negative implications for both the efficiency and quality of the numerical solution. An alternative approach is to use non-conforming meshes and embed joint information into regular computational elements. However, once slip displacement on the joints become comparable to the zone size, Lagrangian (even non-conforming) meshes could suffer from tangling and decreased time step problems. The use of non-conforming meshes in an Eulerian solver may alleviate these difficulties and provide a viable numerical approach for modeling the effects of faults on the dynamic response of geologic materials. We studied shock propagation in jointed/faulted media using a Lagrangian and two Eulerian approaches. To investigate the accuracy of this joint treatment the GEODYN calculations have been compared with results from the Lagrangian code GEODYN-L which uses an explicit treatment of joints via common plane contact. We explore two approaches to joint treatment in the code, one for joints with finite thickness and the other for tight joints. In all cases the sliding interfaces are tracked explicitly without homogenization or blending the joint and block response into an average response. In general, rock joints will introduce an increase in normal compliance in addition to a reduction in shear strength. In the present work we consider the limiting case of stiff discontinuities that only affect the shear strength of the material.

Lomov, I; Antoun, T; Vorobiev, O

2009-12-16T23:59:59.000Z

260

Kyoto University 1 Year Contents  

E-Print Network (OSTI)

and Plasma Physics Laboratory merged into the Institute of Advance Energy. Student Counseling Center in Humanities established. 1941 Chest Disease Research Institute and Institute of Atomic Energy established Laboratory established. 1996 Graduate School of Energy Science established. Institute of Atomic Energy

Takada, Shoji

Note: This page contains sample records for the topic "joint implementation kyoto" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Kyoto University 1 Year Contents  

E-Print Network (OSTI)

and Plasma Physics Laboratory merged into the Institute of Advance Energy. Student Counseling Center Chest Disease Research Institute and Institute of Atomic Energy established. 1944 Wood Research Laboratory established. 1996 Graduate School of Energy Science established. Institute of Atomic Energy

Takada, Shoji

262

KYOTO UNIVERSITYKYOTO UNIVERSITY Financial Report  

E-Print Network (OSTI)

Report 201312 #12; 30 11 13AUN 2ASEAN+3 Educational Forum and Young Speakers Contest3 AUNASEAN University Network21 ASEAN+3 4 ASEAN+3 24 ...... 3,027 ...... 3,447 2451 ......13,403 ...... 9 Century Collections Online 1 KULINE 13AUN2 ASEAN+3 Educational Forum and Young Speakers Contest 6

Takada, Shoji

263

GGREENHOUSE JJUSTICE MOVING BEYOND KYOTO  

E-Print Network (OSTI)

and forestry MtC Million tons carbon MtCO2-e Million tons carbon dioxide equivalent OECD Organization equivalent UNFCCC United Nations Framework Convention on Climate Change WTO World Trade Organization #12 or constructive engagement. Essentially, actions of many in civil society now con- stitute resistance to the COP

Delaware, University of

264

PROCEEDINGS OF RIKEN BNL RESEARCH CENTER WORKSHOP ON RHIC SPIN PHYSICS III AND IV, POLARIZED PARTONS AT HIGH Q2 REGION, AUGUST 3, 2000 AT BNL, OCTOBER 14, 2000 AT KYOTO UNIVERSITY.  

SciTech Connect

International workshop on II Polarized Partons at High Q2 region 11 was held at the Yukawa Institute for Theoretical Physics, Kyoto University, Kyoto, Japan on October 13-14, 2000, as a satellite of the international conference ''SPIN 2000'' (Osaka, Japan, October 16-21,2000). This workshop was supported by RIKEN (The Institute of Physical and Chemical Research) and by Yukawa Institute. The scientific program was focused on the upcoming polarized collider RHIC. The workshop was also an annual meeting of RHIC Spin Collaboration (RSC). The number of participants was 55, including 28 foreign visitors and 8 foreign-resident Japanese participants, reflecting the international nature of the RHIC spin program. At the workshop there were 25 oral presentations in four sessions, (1) RHIC Spin Commissioning, (2) Polarized Partons, Present and Future, (3) New Ideas on Polarization Phenomena, (4) Strategy for the Coming Spin Running. In (1) the successful polarized proton commissioning and the readiness of the accelerator for the physics program impressed us. In (2) and (3) active discussions were made on the new structure function to be firstly measured at RHIC, and several new theoretical ideas were presented. In session (4) we have established a plan for the beam time requirement toward the first collision of polarized protons. These proceedings include the transparencies presented at the workshop. The discussion on ''Strategy for the Coming Spin Running'' was summarized by the chairman of the session, S. Vigdor and G. Bunce.

BUNCE, G.; VIGDOR, S.

2001-03-15T23:59:59.000Z

265

Energy Sector Cybersecurity Framework Implementation Guidance  

Energy Savers (EERE)

DRAFT FOR PUBLIC COMMENT SEPTEMBER, 2014 ENERGY SECTOR CYBERSECURITY FRAMEWORK IMPLEMENTATION GUIDANCE Energy Sector Cybersecurity Framework Implementation Guidance Table of...

266

Providing Resources for Implementation | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Resources for Implementation (May 12, 2010) More Documents & Publications Creating a Climate for Successful Project Implementation Communicating Accomplishments to All...

267

Implementation Report: Energy Conservation Activities  

NLE Websites -- All DOE Office Websites (Extended Search)

to Section 141 of the to Section 141 of the Energy Policy Act of 2005 U.S. Department of Energy February 2007 Table of Contents List of Acronyms .............................................................................................................. 3 Introduction ...................................................................................................................... 4 State of New York, et al. v. Bodman; and NRDC, Inc. et al v. Bodman ............................ 5 Multi-Year Schedule and Implementation Update..................................................... 6 Multi-Year Schedule....................................................................................................... 6 Implementation Update .................................................................................................. 9

268

Implementation Report: Energy Conservation Activities  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

to Section 141 of the to Section 141 of the Energy Policy Act of 2005 U.S. Department of Energy February 2007 Table of Contents List of Acronyms .............................................................................................................. 3 Introduction ...................................................................................................................... 4 State of New York, et al. v. Bodman; and NRDC, Inc. et al v. Bodman ............................ 5 Multi-Year Schedule and Implementation Update..................................................... 6 Multi-Year Schedule....................................................................................................... 6 Implementation Update .................................................................................................. 9

269

Biofuel and Bioenergy implementation scenarios  

E-Print Network (OSTI)

and bioenergy markets are modelled with the aim to conduct quantitative analyses on the production and costsBiofuel and Bioenergy implementation scenarios Final report of VIEWLS WP5, modelling studies #12;Biofuel and Bioenergy implementation scenarios Final report of VIEWLS WP5, modelling studies By André

270

Record of the first meeting of the Joint Coordinating Committee for Radiation Effects Research  

SciTech Connect

This conference was held July 27--28, 1994 in Moscow. The main purpose of the meeting was to implement an agreement between the Russian Federation and the US to facilitate cooperative research on health and environmental effects of radiation. It was hoped that the exchange of information would provide a good basis for employing new scientific knowledge to implement practical measures to facilitate the rehabilitation of radioactively contaminated areas and to treat radiation illnesses. The Russian Federation suggested five main scientific areas for cooperative research. They will prepare proposals on 4--5 projects within the scope of the scientific areas discussed and forward them to the US delegation for consideration of the possibility to facilitate joint research.

NONE

1994-12-31T23:59:59.000Z

271

DOE-EERC jointly sponsored research program  

SciTech Connect

U.S. Department of Energy (DOE) Cooperative Agreement DE-FC21-93MC30098 funded through the Office of Fossil Energy and administered at the Federal Energy Technology Center (FETC) supported the performance of a Jointly Sponsored Research Program (JSRP) at the Energy and Environmental Research Center (EERC) with a minimum 50% nonfederal cost share to assist industry in commercializing and effectively applying efficient, nonpolluting energy technologies that can compete effectively in meeting market demands for clean fuels, chemical feedstocks, and electricity in the 21st century. The objective of the JSRP was to advance the deployment of advanced technologies for improving energy efficiency and environmental performance through jointly sponsored research on topics that would not be adequately addressed by the private sector alone. Examples of such topics include the barriers to hot-gas cleaning impeding the deployment of high-efficiency power systems and the search for practical means for sequestering CO{sub 2} generated by fossil fuel combustion. The selection of particular research projects was guided by a combination of DOE priorities and market needs, as provided by the requirement for joint venture funding approved both by DOE and the private sector sponsor. The research addressed many different energy resource and related environmental problems, with emphasis directed toward the EERC's historic lead mission in low-rank coals (LRCs), which represent approximately half of the U.S. coal resources in the conterminous states, much larger potential resources in Alaska, and a major part of the energy base in the former U.S.S.R., East Central Europe, and the Pacific Rim. The Base and JSRP agreements were tailored to the growing awareness of critical environmental issues, including water supply and quality, air toxics (e.g., mercury), fine respirable particulate matter (PM{sub 2.5}), and the goal of zero net CO{sub 2} emissions.

Hendrikson, J.G.; Sondreal, E.A.

1999-09-01T23:59:59.000Z

272

Joint Center for Energy Storage Research  

SciTech Connect

The Joint Center for Energy Storage Research (JCESR) is a major public-private research partnership that integrates U.S. Department of Energy national laboratories, major research universities and leading industrial companies to overcome critical scientific challenges and technical barriers, leading to the creation of breakthrough energy storage technologies. JCESR, centered at Argonne National Laboratory, outside of Chicago, consolidates decades of basic research experience that forms the foundation of innovative advanced battery technologies. The partnership has access to some of the world's leading battery researchers as well as scientific research facilities that are needed to develop energy storage materials that will revolutionize the way the United States and the world use energy.

Eric Isaacs

2012-11-30T23:59:59.000Z

273

Joint Equalization and Decoding via Convex Optimization  

E-Print Network (OSTI)

of Department, Costas N. Georghiades May 2012 Major Subject: Electrical Engineering iii ABSTRACT Joint Equalization and Decoding via Convex Optimization. (May 2012) Byung Hak Kim, B.S., Korea University; M.S., Korea University Chair of Advisory Committee... of primal variables g and w defined for Problem-P and dual variables n and m defined for Problem-D1 on the same example given by Fig. 3: SPC(3,2) with DIC for N = 3: : : : : : : : 30 5 Illustration of Viterbi updates in Problem-D2 on the same exam- ple...

Kim, Byung Hak

2012-07-16T23:59:59.000Z

274

Berkeley India Joint Leadership on Energy and Environment | Open Energy  

Open Energy Info (EERE)

India Joint Leadership on Energy and Environment India Joint Leadership on Energy and Environment Jump to: navigation, search Logo: Berkeley India Joint Leadership on Energy and Environment Name Berkeley India Joint Leadership on Energy and Environment Agency/Company /Organization Lawrence Berkeley National Laboratory Sector Energy Focus Area Energy Efficiency Topics Policies/deployment programs, Pathways analysis, Background analysis Website http://india.lbl.gov/ Country India Southern Asia References Program Homepage[1] Abstract The Berkeley India Joint Leadership on Energy and Environment (BIJLEE) is a Lawrence Berkeley National Laboratory joint research and development program in which researchers work with the government and private sector of India to assist in the adoption of pathways and approaches for reducing the emissions of greenhouse gases while pursuing sustainable economic development.

275

Development of the bus joint for the ITER Central Solenoid  

SciTech Connect

The terminations of the Central Solenoid (CS) modules are connected to the bus extensions by joints located outside the CS in the gap between the CS and Torodial Field (TF) assemblies. These joints have very strict space limitations. Low resistance is a common requirement for all ITER joints. In addition, the CS bus joints will experience and must be designed to withstand significant variation in the magnetic field of several tenths of a Tesla per second during initiation of plasma. The joint resistance is specified to be less than 4 nOhm. The joints also have to be soldered in the field and designed with the possibility to be installed and dismantled in order to allow cold testing in the cold test facility. We have developed coaxial joints that meet these requirements and have demonstrated the feasibility to fabricate and assemble them in the vertical configuration. We introduced a coupling cylinder with superconducting strands soldered to the surface of the cable that can be installed in the ITER assembly hall and at the Cold Test Facility. This cylinder serves as a transition area between the CS module and the bus extension. We made two racetrack samples and tested four bus joints in our Joint Test Apparatus. Resistance of the bus joints was measured by a decay method and by a microvoltmeter; the value of the current was measured by the Hall probes. This measurement method was verified in the previous tests. The resistance of the joints varied insignificantly from 1.5 to 2 nOhm. One of the challenges associated with a soldered joint is the inability to use corrosive chemicals that are difficult to clean. This paper describes our development work on cable preparation, chrome removal, compaction, soldering, and final assembly and presents the test results.

Martovetsky, Nicolai N [ORNL] [ORNL; Irick, David Kim [ORNL] [ORNL; Kenney, Steven J [ORNL] [ORNL

2013-01-01T23:59:59.000Z

276

Meeting Energy Reduction Requirements at Joint Base San Antonio  

E-Print Network (OSTI)

• Joint Information Operations Warfare Center • 37th Training Wing • National Security Agency / Central Security Service • Cryptologic Systems Division • 59 additional units 7 ESL-KT-13-12-25 CATEE 2013: Clean Air Through Energy Efficiency Conference, San...One Team, One Mission: Your Success! The Premier Joint Base in the Department of Defense! Joint Base San Antonio and Energy Program 18 December 2013 Bruce Dschuden, Frank Thomas JBSA Resource Efficiency Managers ESL-KT-13-12-25 CATEE 2013...

Dschuden, B.; Thomas, F.

2013-01-01T23:59:59.000Z

277

HUD Choice Neighborhoods Implementation Grants  

Energy.gov (U.S. Department of Energy (DOE))

The U.S. Department of Housing and Urban Development (HUD) is accepting applications to support communities that have undergone a comprehensive local planning process and are ready to implement their "Transformation Plan" to redevelop the neighborhood.

278

Local Action – Planning and Implementation  

Science Journals Connector (OSTI)

In its recently published Strategic Research Agenda the European wind energy platform, TPWind, proposes an ambitious vision ... Europe. In this vision, 300 GW of wind energy capacity will be implemented by 2030, ...

Maryke van Staden; Francesco Musco

2010-01-01T23:59:59.000Z

279

Hitching of cable drawn implements  

E-Print Network (OSTI)

systems still use the concept of moving the carrier and The journal used as pattern for format and style was Transactions of the ASAE (American Society of Agricultural Engineers). power unit with the implement. A possible method of increasing power... systems still use the concept of moving the carrier and The journal used as pattern for format and style was Transactions of the ASAE (American Society of Agricultural Engineers). power unit with the implement. A possible method of increasing power...

Harrison, Carl Randall

2012-06-07T23:59:59.000Z

280

WTP Safety Culture Advice Joint Topic (HSEP/TWC)  

NLE Websites -- All DOE Office Websites (Extended Search)

should not be considered a substitute for full HAB consensus on any particular issue. WTP Safety Culture Advice Joint Topic (HSEPTWC) Framing questions for discussion regarding...

Note: This page contains sample records for the topic "joint implementation kyoto" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Stochastic Joint Inversion for Integrated Data Interpretation in Geothermal Exploration  

Energy.gov (U.S. Department of Energy (DOE))

Stochastic Joint Inversion for Integrated Data Interpretation in Geothermal Exploration presentation at the April 2013 peer review meeting held in Denver, Colorado.

282

Joint Capability Technology Demonstration (JCTD) Industry Day Agenda  

Energy.gov (U.S. Department of Energy (DOE))

Agenda outlines the activities of the 2014 Smart Power Infrastructure Demonstration for Energy Reliability and Security (SPIDERS) Joint Capability Technology Demonstration (JCTD) Industry Day in Fort Carson, Colorado.

283

Joint Institute for Neutron Sciences | ornl.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Facilities and Capabilities High Flux Isotope Reactor Spallation Neutron Source Joint Institute for Neutron Sciences Scientific Labs Neutron Science Home | Science & Discovery |...

284

Joint pricing and inventory control under reference price effects.  

E-Print Network (OSTI)

??In many firms the pricing and inventory control functions are separated. However, a number of theoretical models suggest a joint determination of inventory levels and… (more)

Gimpl-Heersink, Lisa

2008-01-01T23:59:59.000Z

285

OMB and CEQ Joint Memorandum on Environmental Collaboration and...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Memorandum on Environmental Collaboration and Conflict Resolution This Office of Management and Budget (OMB) and Council on Environmental Quality (CEQ) joint memorandum expands...

286

EA-1945: Northern Mid-Columbia Joint Project; Grant, Douglas...  

Office of Environmental Management (EM)

Joint Project; Grant, Douglas, and Chelan Counties, Washington SUMMARY Bonneville Power Administration (BPA) is preparing an EA to assess the potential environmental impacts...

287

Joint transmission system projects to improve system reliability  

NLE Websites -- All DOE Office Websites (Extended Search)

5 12 JOINT NEWS RELEASE Bonneville Power Administration Puget Sound Energy Seattle City Light Snohomish PUD FOR IMMEDIATE RELEASE Tuesday, January 24, 2012 CONTACT: Mike Hansen,...

288

Senior International Energy Officials Issue Joint Statement in...  

Office of Environmental Management (EM)

(GNEP) and nuclear energy cooperation. The People's Republic of China, France, Japan, Russia and the United States issued the Joint Statement, which addresses the prospects for...

289

Russia-Joint Programme on Resource Efficient and Cleaner Production...  

Open Energy Info (EERE)

Russia Eastern Europe References RECP Programme1 Overview UNIDO and UNEP launched in 1994 a joint programme to establish National Cleaner Production CentresProgrammes (NCPCs...

290

Joint Working Group for Fusion Safety | Princeton Plasma Physics...  

NLE Websites -- All DOE Office Websites (Extended Search)

Environment, Safety & Health Environmental Management System Joint Working Group for Fusion Safety Procurement Division Technology Transfer Furth Plasma Physics Library Contact...

291

Joint inversion of electrical and seismic data for Fracture char...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Joint inversion of electrical and seismic data for Fracture char. and Imaging of Fluid Flow in Geothermal Systems Michael Batzle, PI Colorado School of Mines Track Name: Fluid...

292

Seismic Capacity of Threaded, Brazed, and Grooved Pipe Joints  

Office of Environmental Management (EM)

* Static and shake table tests conducted of pressurized - Threaded, - Brazed, - Mechanical joints Static Testing o Pressurized spool to 150 psi o Steady downward force applied...

293

Montana Joint Application for Proposed Work in Montana's Streams...  

Open Energy Info (EERE)

OpenEI Reference LibraryAdd to library Form: Montana Joint Application for Proposed Work in Montana's Streams (DNRC Form 270) Abstract Application must be completed for...

294

EM's Acting Assistant Secretary Selected to Lead Joint Convention...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

nuclear and non-nuclear, particularly South Asia, the Pacific Region, Latin America, Africa and the Middle East - to ratify the Joint Convention. There are currently 69...

295

Value Creation Through Joint Venture and Strategic Alliance Formation.  

E-Print Network (OSTI)

??This study examines the price reaction to the announcements of joint venture and strategic alliance formation, the main determinants of the partnering firm's choices to… (more)

Pana, Elisabeta

2006-01-01T23:59:59.000Z

296

Joint probability analysis of precipitation and streamflow extremes.  

E-Print Network (OSTI)

??This thesis focuses on evaluation of joint occurrence of extreme precipitation and streamflow events at several hydrologic structures in South Florida. An analysis of twelve… (more)

Lin, Chia-hung.

2013-01-01T23:59:59.000Z

297

Advanced tests of wet welded joints  

SciTech Connect

Wet Welding has in former times only been applied to secondary structural components. Nowadays wet welding has become an upcoming repair process due to high process flexibility, its low investment costs and its high versatility. Even the quality of the wet welded joints has been improved remarkably due to intensive and concentrated development activities. However, especially in the North Sea regions owners of offshore structures and classifying authorities still hesitate to recognize the process as a reliable alternative to dry hyperbaric welding repair methods. It therefore requires further activities especially in the field of data development for life prediction of such repaired components. Advanced testing methods are necessary, additional design criteria are to be developed and achievable weldment quality data are to be included in acknowledged and approved standards and recommendations to improve the credibility of the process and to solve the problem of quality assurance for wet welded joints. A comprehensive project, sponsored by the European Community under the Thermie Programme, is in progress to develop new testing procedures to generate the required data and design criteria for the future application of the wet welding process to main components of offshore structures. It is the aim of the project to establish additional fitness for purpose data for this process.

Pachniuk, I. [Stolt Comex Seaway S.A., Marseille (France); Petershagen, H.; Pohl, R. [Univ. Hamburg (Germany); Szelagowski, P.; Drews, O. [GKSS Research Centre, Geesthacht (Germany)

1994-12-31T23:59:59.000Z

298

Building Technologies Office: Implementation, Certification and Enforcement  

NLE Websites -- All DOE Office Websites (Extended Search)

Implementation, Implementation, Certification and Enforcement to someone by E-mail Share Building Technologies Office: Implementation, Certification and Enforcement on Facebook Tweet about Building Technologies Office: Implementation, Certification and Enforcement on Twitter Bookmark Building Technologies Office: Implementation, Certification and Enforcement on Google Bookmark Building Technologies Office: Implementation, Certification and Enforcement on Delicious Rank Building Technologies Office: Implementation, Certification and Enforcement on Digg Find More places to share Building Technologies Office: Implementation, Certification and Enforcement on AddThis.com... About Standards & Test Procedures Implementation, Certification & Enforcement Standardized Templates for Reporting Test Results

299

MIT Joint Program on the Science and Policy of Global Change  

E-Print Network (OSTI)

paper #12;An Analysis of the European Emission Trading Scheme John M. Reilly and Sergey Paltsev Abstract An international emissions trading system is a featured instrument in the Kyoto Protocol to the Framework countries. The US was the leading proponent of emissions trading in the negotiations leading up

300

Federal Agency NEPA Implementing Procedures  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Agency NEPA Implementing Procedures Agency NEPA Implementing Procedures Note: Some Departments' agencies have their own NEPA implementing procedures. To access Department-wide NEPA implementing procedures, click on the name of the Federal Department. To access NEPA implementing procedures for Department's agencies, click on the provided links. Department/ Agency: Division: Link: Department of Agriculture Agricultural Research Service http://www.ecfr.gov/cgi- in/text- idx?c=ecfr&SID=47c103e07fd64e933c7f74c 4b3c4ac9a&rgn=div5&view=text&node=7:6. 1 2 1 8&id 7 Animal and Plant Health Inspection Service http://www.ecfr.gov/cgi-bin/text- idx?c=ecfr&SID=47c103e07fd64e933c7f74c 4b3c4ac9a&rgn=div5&view=text&node=7:5. 1.1.1.21&idno=7 Farm Service Agency http://www.ecfr.gov/cgi-bin/text-

Note: This page contains sample records for the topic "joint implementation kyoto" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Former Worker Program - Joint Outreach Task Group  

NLE Websites -- All DOE Office Websites (Extended Search)

Group Group Former Worker Medical Screening Program (FWP) The Joint Outreach Task Group (JOTG) includes representatives from HSS, Department of Labor (DOL), the National Institute for Occupational Safety and Health (NIOSH), the Offices of the Ombudsman for DOL and NIOSH, and the DOE-funded FWP projects. The JOTG was established in 2009 under the premise that agencies/programs with common goals can work together by combining resources and coordinating outreach efforts. Each involved agency has a different mission, but the missions are complementary. By working together, the agencies are better able to serve the DOE workforce. The JOTG focuses on educating the former workers on the programs and resources available to them. The JOTG has created a monthly calendar of community events to facilitate interagency and community involvement in these events.

302

Joint resummation for heavy quark production.  

E-Print Network (OSTI)

ar X iv :h ep -p h/ 05 10 14 9v 1 1 2 O ct 2 00 5 February 2, 2008 4:14 WSPC/INSTRUCTION FILE jr International Journal of Modern Physics A c© World Scientific Publishing Company JOINT RESUMMATION FOR HEAVY QUARK PRODUCTION ANDREA BANFI Cavendish... to corrections O(1/p2T ), the observable may at any order 12 be written in the following factorized form d?AB?Q+X dpT = ? a,b ? 1 0 d?ad?b ?a/A(?a, ”)?b/B(?b, ”) d?ˆab?Q+X dpT (?a, ?b, ?s(”), pT ) , (1) with d?ˆab?Q+X/dpT the partonic differential cross...

Banfi, Andrea; Laenen, Eric

303

UnitedStates-JapanJointNuclenrEnergyActionPlan  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

UnitedStates-JapanJointNuclenrEnergyActionPlan UnitedStates-JapanJointNuclenrEnergyActionPlan 1Introduction 1.1BackguPoundandObjective Pè‚„sidentBushoftheUnitedStatesandPrimeMinisterKoizumiofJapanhaveboth statedtheirstrongsupportfbrthecontributionofnuclearpowertoenergysecurityand theglobalenvironmenLJapanwasthefirstnationtoendorsePresidentBushsGIobal NuclearEnergyParmership DuringtheJune29,2006meetingbetweenPresidentBushandPIimeMinister

304

Joint Attention and Dynamics Repertoire in Coupled Dynamical Recognizers  

E-Print Network (OSTI)

and Hiroyuki Iizuka Department of General Systems Sciences, Graduate School of Arts and Sciences, University with two wheels. A recurrent neural network is used to produce the motor outputs. By controlling this the joint attention to let your dog pick up a ball), we call it "instrumental joint attention

Ikegami, Takashi

305

2006 TRANSPORTATION TOMORROW SURVEY JOINT PROGRAM IN TRANSPORTATION  

E-Print Network (OSTI)

2006 TRANSPORTATION TOMORROW SURVEY JOINT PROGRAM IN TRANSPORTATION UNIVERSITY OF TORONTO 2006 Transportation Tomorrow Survey Data Presentation #12;2006 TRANSPORTATION TOMORROW SURVEY JOINT PROGRAM IN TRANSPORTATION UNIVERSITY OF TORONTO City of Hamilton City of Kawartha Lakes City of Guelph City of Brantford

Toronto, University of

306

Microstructural evolution of eutectic Au-Sn solder joints  

SciTech Connect

Current trends toward miniaturization and the use of lead(Pb)-free solder in electronic packaging present new problems in the reliability of solder joints. This study was performed in order to understand the microstructure and microstructural evolution of small volumes of nominally eutectic Au-Sn solder joints (80Au-20Sn by weight), which gives insight into properties and reliability.

Song, Ho Geon

2002-05-31T23:59:59.000Z

307

Joint Power-Delay Minimization in Green Wireless Access Networks  

E-Print Network (OSTI)

, adapting power consumption to traffic load [3] or devising intelligent network deployment strategies using an optimization problem that jointly minimizes the power consumption of the network and the sum of data unitJoint Power-Delay Minimization in Green Wireless Access Networks Farah Moety, Samer Lahoud, Kinda

Paris-Sud XI, Université de

308

Joint Polar Satellite System Science Seminar Annual Digest  

E-Print Network (OSTI)

iii Joint Polar Satellite System Science Seminar Annual Digest 2013 #12;#12;Joint Polar Satellite Polar Satellite System (JPSS) Program Science, it is my pleasure to present this digest, which services, such as forecasting of severe weather events and environmental monitoring of land, ocean

309

Jointly Sponsored Research Program Energy Related Research  

SciTech Connect

Cooperative Agreement, DE-FC26-98FT40323, Jointly Sponsored Research (JSR) Program at Western Research Institute (WRI) began in 1998. Over the course of the Program, a total of seventy-seven tasks were proposed utilizing a total of $23,202,579 in USDOE funds. Against this funding, cosponsors committed $26,557,649 in private funds to produce a program valued at $49,760,228. The goal of the Jointly Sponsored Research Program was to develop or assist in the development of innovative technology solutions that will: (1) Increase the production of United States energy resources - coal, natural gas, oil, and renewable energy resources; (2) Enhance the competitiveness of United States energy technologies in international markets and assist in technology transfer; (3) Reduce the nation's dependence on foreign energy supplies and strengthen both the United States and regional economies; and (4) Minimize environmental impacts of energy production and utilization. Under the JSR Program, energy-related tasks emphasized enhanced oil recovery, heavy oil upgrading and characterization, coal beneficiation and upgrading, coal combustion systems development including oxy-combustion, emissions monitoring and abatement, coal gasification technologies including gas clean-up and conditioning, hydrogen and liquid fuels production, coal-bed methane recovery, and the development of technologies for the utilization of renewable energy resources. Environmental-related activities emphasized cleaning contaminated soils and waters, processing of oily wastes, mitigating acid mine drainage, and demonstrating uses for solid waste from clean coal technologies, and other advanced coal-based systems. Technology enhancement activities included resource characterization studies, development of improved methods, monitors and sensors. In general the goals of the tasks proposed were to enhance competitiveness of U.S. technology, increase production of domestic resources, and reduce environmental impacts associated with energy production and utilization. This report summarizes the accomplishments of the JSR Program.

Western Research Institute

2009-03-31T23:59:59.000Z

310

Joint Institute for Nanoscience Annual Report 2003  

SciTech Connect

The Joint Institute for Nanoscience (JIN) is a cooperative venture of the University of Washington and Pacific Northwest National Laboratory to encourage and enhance high-impact and high-quality nanoscience and nanotechnology of all types. This first annual report for the JIN summarizes activities beginning in 2001 and ending at the close of fiscal year 2003 and therefore represents somewhat less than two years of activities. Major portions of the JIN resources are dedicated to funding graduate students and postdoctoral research associates to perform research in collaborations jointly directed by Pacific Northwest National Laboratory (PNNL) staff scientists and University of Washington (UW) professors. These fellowships were awarded on the basis of applications that included research proposals. JIN co-sponsors an annual Nanoscale Science and Technology Workshop held in Seattle. In addition to involving PNNL staff in various UW nanoscience courses and seminars, a National Science Foundation grant Development of UW-PNL Collaborative Curriculums in Nano-Science and Technology has allowed the development of three intensive short courses that are taught by UW faculty, PNNL staff, and faculty from other institutions, including Washington State University, the University of Idaho, Stanford University, and the University of Alaska. The initial JIN agreement recognized that expansion of cooperation beyond UW and PNNL would be highly valuable. Starting in early 2003, efforts were initiated to form a regional communication link called the Northwest Nanoscience and Nanotechnology Network (N?). In concept, N? is a tool to encourage communication and help identify regional resources and nanoscience and technology activities.

Baer, Donald R.; Campbell, Charles

2004-02-01T23:59:59.000Z

311

Launch implementation | Open Energy Information  

Open Energy Info (EERE)

Launch implementation Launch implementation Jump to: navigation, search Stage 4 LEDS Home Introduction to Framework Assess current country plans, policies, practices, and capacities Develop_BAU Stage 4: Prioritizing and Planning for Actions Begin execution of implementation plans 1.0. Organizing the LEDS Process 1.1. Institutional Structure for LEDS 1.2. Workplan to Develop the LEDS 1.3. Roles and responsibilities to develop LEDS 2.1. Assess current country plans, policies, practices, and capacities 2.2. Compile lessons learned and good practices from ongoing and previous sustainable development efforts in the country 2.3. Assess public and private sector capacity to support initiatives 2.4. Assess and improve the national GHG inventory and other economic and resource data as needed for LEDS development

312

Seismic Capacity of Threaded, Brazed, and Grooved Pipe Joints  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

SEISMIC CAPACITY OF THREADED, SEISMIC CAPACITY OF THREADED, BRAZED AND GROOVED PIPE JOINTS Brent Gutierrez, PhD, PE George Antaki, PE, F.ASME DOE NPH Conference October 25-26, 2011 Motivation * Understand the behavior and failure mode of common joints under extreme lateral loads * Static and shake table tests conducted of pressurized - Threaded, - Brazed, - Mechanical joints Static Testing o Pressurized spool to 150 psi o Steady downward force applied while recording deflections o Grooved clamped mech. joints * 16 tests performed o Threaded joints * 4 tests o Brazed (copper) * 4 tests Grooved Couplings o Catalog items o ASTM A106 Grade B piping o ASTM A 536 couplings o Lateral deflections imposed well above manufacturer's angular installation tolerance

313

Senior International Energy Officials Issue Joint Statement in Support of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Senior International Energy Officials Issue Joint Statement in Senior International Energy Officials Issue Joint Statement in Support of the Global Nuclear Energy Partnership Senior International Energy Officials Issue Joint Statement in Support of the Global Nuclear Energy Partnership May 21, 2007 - 12:55pm Addthis WASHINGTON, DC - U.S. Secretary of Energy Samuel W. Bodman today announced that the U.S. Department of Energy (DOE) and senior energy officials from some of the world's leading economies issued a joint statement in support of the Global Nuclear Energy Partnership (GNEP) and nuclear energy cooperation. The People's Republic of China, France, Japan, Russia and the United States issued the Joint Statement, which addresses the prospects for international cooperation in peaceful uses of nuclear energy, including

314

United States and Czech Republic Establish a Joint Civil Nuclear  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Establish a Joint Civil Nuclear Establish a Joint Civil Nuclear Cooperation Center in Prague United States and Czech Republic Establish a Joint Civil Nuclear Cooperation Center in Prague June 12, 2013 - 12:17pm Addthis News Media Contact (202) 586-4940 PRAGUE, Czech Republic - The U.S. Department of Energy (DOE) recently joined with the U.S. Embassy in Prague and the Czech Republic's Ministry of Education, Youth and Sports to sign an agreement that establishes a joint Civil Nuclear Cooperation Center in Prague. The creation of this Center is another valued step in expanding U.S.-Czech energy collaboration and fulfills the commitment made by President Obama and Czech Prime Minister Nečas in October 2011 to establish such a Center to facilitate and coordinate joint activities and support regional initiatives in the

315

The static strength of multiplanar joints: A design formulation  

SciTech Connect

A parametric study of multiplanar KK-joints has been carried out using a well calibrated and validated finite element model. The finite element results together with experimental data available in literature from a database of nearly 80 joints. The accuracy and applicability of existing strength prediction formulae are assessed using this database. The AWS formulation, which takes into account the multiplanar effects and obviates the need for joint classification, was reappraised using this KK-joint database and published experimental data on multiplanar XX- and TT-joints. Modification factors were proposed to enhance the reliability of the AWS formulation with particular attention given to incorporating the effects of the gaps and the {gamma} ratio.

Wilmshurst, S.R.; Lee, M.M.K. [University College of Swansea (United Kingdom)

1994-12-31T23:59:59.000Z

316

Financing Project Implementation | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

This presentation covers typical sources of financing to implement energy efficiency projects in industry. Financing Project Implementation (August 11, 2010) More...

317

Financing Program Design and Implementation Considerations  

Energy.gov (U.S. Department of Energy (DOE))

Designing and implementing clean energy financing programs takes more than simply identifying applicable financing structures and implementing them. State and local governments should also take...

318

Federal Sector Renewable Energy Project Implementation: ""What...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Federal Sector Renewable Energy Project Implementation: ""What's Working and Why Federal Sector Renewable Energy Project Implementation: ""What's Working and Why Presentation by...

319

Template Implementing Agreement | Open Energy Information  

Open Energy Info (EERE)

Implementing Agreement Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: Template Implementing AgreementLegal Published NA Year...

320

Preparing for Project Implementation Measuring Energy Achievements...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

for Project Implementation Measuring Energy Achievements Save Energy Now LEADER Web Conference Project Implementation Seminar Series Save Energy Now LEADER Web Conference...

Note: This page contains sample records for the topic "joint implementation kyoto" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Preparing for Project Implementation Announcing "the PRIZE",...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

8 - Preparing for Project Implementation Announcing "the PRIZE" Save Energy Now LEADER Web Conference Project Implementation Seminar Series Save Energy Now LEADER Web Conference...

322

Preparing for Project Implementation Motivating Employees to...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Save Energy Now LEADER Web Conference Fred Schoeneborn, CEM, CEA June 9, 2010 7 - Preparing for Project Implementation Motivating Employees to Implement Projects Save Energy Now...

323

Preparing for Project Implementation Assigning Accountability...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Project Implementation Assigning Accountability for Each Project Save Energy Now LEADER Web Conference Project Implementation Seminar Series Save Energy Now LEADER Web Conference...

324

Implementation Standing Technical Committee Presentation  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Implementation Standing Technical Committee (I-STC) Meeting Deane Evans (NJIT) and Stacy Hunt (Confluence), co-chairs March 1, 2012 What is the I-STC? * Focused on identifying and documenting key barriers and opportunities in implementation of Building America (BA) research results How Does the I-STC Work? * Fosters discussion and prioritization of key research activities * Documents these for DOE/NREL planning purposes 2012 Focus * Clarify key priorities and ensure proper prioritization * Research and track activities that address these priorities inside and outside of BA * Try to knock some of these priorities off the list by documenting existing solutions * Identify critical tasks for 2013 and beyond

325

Sonoma County Solar Implementation Plan  

Energy.gov (U.S. Department of Energy (DOE))

Solar power and energy efficiency constitute a win?win formula to jump start the local economy and effectively respond to the climate change crisis. To address these important opportunities, this Sonoma County Solar Implementation Plan was prepared by Solar Sonoma County, a nonprofit public/private consortium of local governments, businesses, other entities and individuals working collaboratively to identify and implement initiatives to promote, expand, and accelerate solar power and energy efficiency throughout Sonoma County, under a U.S. Department of Energy Solar America Cities grant administered by the City of Santa Rosa.

326

Monte Carlo Simulation of Joint Transport of Neutrons Monte Carlo Simulation of Joint Transport of Neutrons  

National Nuclear Security Administration (NNSA)

Monte Carlo Simulation of Joint Transport of Neutrons Monte Carlo Simulation of Joint Transport of Neutrons Monte Carlo Simulation of Joint Transport of Neutrons and Photons and Photons Zhitnik Zhitnik A A . . K K . . , , Artemeva Artemeva E.V., E.V., Bakanov Bakanov V.V., V.V., Donskoy Donskoy E.N., E.N., Zalyalov Zalyalov A.N., A.N., Ivanov Ivanov N.V., N.V., Ognev Ognev S.P., S.P., Ronzhin Ronzhin A.B., A.B., Roslov Roslov V.I., V.I., Semenova Semenova T.V. T.V. RFNC-VNIIEF, 607190, Sarov, RFNC-VNIIEF, 607190, Sarov, Nizhni Nizhni Novgorod region Novgorod region The approaches used at VNIIEF to simulate transport of neutrons and photons in standard (with The approaches used at VNIIEF to simulate transport of neutrons and photons in standard (with surface description of region interfaces) and grid geometries are considered in the paper.

327

Long-term follow-up of silastic joint replacement of the first metatarsophalangeal joint  

Science Journals Connector (OSTI)

Aim: To assess long-term outcome of silastic joint replacement of the first metatarsophalangeal joint. Methods: Thirty-two patients (42 feet) with double-stem silicone implant arthroplasty of the first metatarsophalangeal joint were reviewed at an average of 8 years (range 4–19 years). Surgery was for hallux rigidus in 25 cases and for hallux valgus with degenerative osteoarthritis in 17 cases. Patients with rheumatoid arthritis were excluded. Mean patient age was 64 years. Results: Twenty-eight of the 32 patients were very satisfied with the procedure. No patients were dissatisfied. Pain relief was subjectively excellent or good in 28 patients. Three of the four patients with fair or poor relief of pain had surgery for hallux valgus with degenerative osteoarthritis. Radiographs showed sclerosis around all prostheses having cysts with bony erosions in 17 cases. Twelve had clinical features of silicone synovitis in the early postoperative period but this was not present at final review despite radiological findings of new bone formation (57%) and localised osteolysis (40%). Two patients had transfer metatarsalgia with a stress fracture. No patient required revision surgery. Conclusion: Our long-term study shows patients to have very good subjective and objective results despite poor radiological results. There is a role for double-stemmed silicone implant arthroplasty in low demand patients.

R Bommireddy; S.K Singh; P Sharma; M El Kadafi; D Rajan; M Rowntree

2003-01-01T23:59:59.000Z

328

Abstract--Friction modeling is essential for joint dynamic identification and control. Joint friction is composed of a  

E-Print Network (OSTI)

Abstract--Friction modeling is essential for joint dynamic identification and control. Joint friction is composed of a viscous and a dry friction force. According to Coulomb law, dry friction depends linearly on the load in the transmission. However, in robotics field, a constant dry friction is frequently

Paris-Sud XI, Université de

329

Fact Sheet: United States-Japan Joint Nuclear Energy Action Plan...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

United States-Japan Joint Nuclear Energy Action Plan Fact Sheet: United States-Japan Joint Nuclear Energy Action Plan Fact Sheet: United States-Japan Joint Nuclear Energy Action...

330

DATA BASE DESIGN AND IMPLEMENTATION  

E-Print Network (OSTI)

, integrity constraints, A brief history of database applications When not to use database Fundamentals8/26/2010 1 1 ITCS 3160 DATA BASE DESIGN AND IMPLEMENTATION JING YANG 2010 FALL Class 2: Database System Concepts and Architecture Review of Class 1 2 Database MDatabase management systems (DBMS) Concept

Yang, Jing

331

DATA BASE DESIGN AND IMPLEMENTATION  

E-Print Network (OSTI)

Approach A Brief History of Database Applications When Not to Use a DBMS Fundamentals of Database Systems8/24/2010 1 ITCS 3160 DATA BASE DESIGN AND IMPLEMENTATION JING YANG 2010 FALL Class 1 Database and database users Outline Introduction A 2 An Example Characteristics of the Database Approach Actors

Yang, Jing

332

Designing andg g Implementing Effective  

E-Print Network (OSTI)

Designing andg g Implementing Effective Monitoring - Element IMonitoring Element I (Handbook is to protect and restore waterUltimate goal is to protect and restore water bodies for their intended uses. Presentation III 3 #12;The goal is to restoreThe goal is to restore d t t t b did t t t b diand protect water

333

The Joint BioEnergy Institute (JBEI): Developing New Biofuels by Overcoming Biomass Recalcitrance  

E-Print Network (OSTI)

Bioenerg. Res. (010-9086-2 The Joint BioEnergy Institute (JBEI): DevelopingThe mission of the Joint BioEnergy Institute is to advance

Scheller, Henrik Vibe; Singh, Seema; Blanch, Harvey; Keasling, Jay D.

2010-01-01T23:59:59.000Z

334

E-Print Network 3.0 - areas joint coordinating Sample Search...  

NLE Websites -- All DOE Office Websites (Extended Search)

to reach areas under objects . guiding surfaces of prismatic joints . must... to as a robot arm, with links and joints described in ... Source: Petriu, Emil M. - School of...

335

The 1st Joint International Conference on Multibody System Dynamics May 2527, 2010, Lappeenranta, Finland  

E-Print Network (OSTI)

The 1st Joint International Conference on Multibody System Dynamics May 25­27, 2010, Lappeenrantast Joint International Conference on Multibody System Dynamics (IMSD'10)., Lappeenranta : Finland

Paris-Sud XI, Université de

336

Energy Department Announces Selections for U.S.-India Joint Clean...  

Energy Savers (EERE)

Energy Department Announces Selections for U.S.-India Joint Clean Energy Research and Development Center Energy Department Announces Selections for U.S.-India Joint Clean Energy...

337

Implementation Report: Energy Conservation Standards Activities  

NLE Websites -- All DOE Office Websites (Extended Search)

Implementation Report: Implementation Report: Energy Conservation Standards Activities Submitted Pursuant to Section 141 of the Energy Policy Act of 2005 U.S. Department of Energy August 2006 Table of Contents List of Acronyms .............................................................................................................. 3 1 Introduction .............................................................................................................. 4 2 Multi-Year Schedule and Implementation Update............................................. 6 2.1 Multi-Year Schedule........................................................................................... 6 2.2 Implementation Update ......................................................................................

338

Resources on Implementing Energy Savings Performance Contracts  

Energy.gov (U.S. Department of Energy (DOE))

Many resources are available to help Federal agencies implement energy savings performance contracts (ESPCs).

339

Implementation Report: Energy Conservation Standards Activities  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Implementation Report: Implementation Report: Energy Conservation Standards Activities Submitted Pursuant to Section 141 of the Energy Policy Act of 2005 U.S. Department of Energy August 2006 Table of Contents List of Acronyms .............................................................................................................. 3 1 Introduction .............................................................................................................. 4 2 Multi-Year Schedule and Implementation Update............................................. 6 2.1 Multi-Year Schedule........................................................................................... 6 2.2 Implementation Update ......................................................................................

340

Joint Outreach Task Group (JOTG) Calendar: November  

NLE Websites -- All DOE Office Websites (Extended Search)

November 2013 November 2013 Sunday Monday Tuesday Wednesday Thursday Friday Saturday 27 28 29 30 31 1 2 3 4 5 FWP Event Mound Miamisburg, OH 6 Local Event X-10 Oak Ridge, TN Local Event Y-12 Oak Ridge, TN Local Event Y-12 Oak Ridge, TN FWP Event X-10/Y-12 Oak Ridge, TN 7 Local Event X-10/Y-12 Oak Ridge, TN FWP Event K-25 Oak Ridge, TN 8 9 10 11 12 13 14 Local Event X-10 Oak Ridge, TN 15 16 17 18 19 Local Event X-10/Y-12 Oak Ridge, TN Local Event Y-12 Oak Ridge, TN 20 21 FWP Event Mound Miamisburg, OH 22 23 24 25 26 27 28 29 30 31 1 2 3 4 5 6 Legend Energy Employees Occupational Illness Compensation Program Act (EEOICPA) Events Joint Outreach Task Group (JOTG) Events Local Events Former Worker Program Medical Screening Program (FWP) Events Other Events This page was last updated on September 16, 2013 Retiree Breakfast Former Worker Program Event

Note: This page contains sample records for the topic "joint implementation kyoto" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Joint Outreach Task Group (JOTG) Calendar: May  

NLE Websites -- All DOE Office Websites (Extended Search)

May 2013 May 2013 Sunday Monday Tuesday Wednesday Thursday Friday Saturday 28 29 30 1 Local Event X-10 Oak Ridge, TN Local Event Y-12 Oak Ridge, TN Local Event Y-12 Oak Ridge, TN FWP Event X-10/Y-12 Oak Ridge, TN 2 Local Event X-10/Y-12 Oak Ridge, TN FWP Event K-25 Oak Ridge, TN 3 4 5 6 7 FWP Event Mound Miamisburg, OH 8 9 Local Event X-10 Oak Ridge, TN 10 11 12 13 14 Local Event Hanford Richland, WA Local Event X-10 Oak Ridge, TN 15 Local Event Hanford Richland, WA 16 FWP Event Mound Miamisburg, OH 17 18 19 20 21 Local Event X-10/Y-12 Oak Ridge, TN 22 23 24 25 26 27 28 29 30 31 1 Legend Energy Employees Occupational Illness Compensation Program Act (EEOICPA) Events Joint Outreach Task Group (JOTG) Events Local Events Former Worker Program Medical Screening Program (FWP) Events Other Events This page was last updated on April 12, 2013

342

Joint Outreach Task Group (JOTG) Calendar: January  

NLE Websites -- All DOE Office Websites (Extended Search)

January 2013 January 2013 Sunday Monday Tuesday Wednesday Thursday Friday Saturday 30 31 1 2 Local Event X-10 Oak Ridge, TN Local Event Y-12 Oak Ridge, TN 3 Local Event X-10/Y-12 Oak Ridge, TN Local Event Y-12 Oak Ridge, TN FWP Event K-25 Oak Ridge, TN 4 5 6 7 8 Local Event X-10 Oak Ridge, TN 9 Local Event Y-12 Oak Ridge, TN FWP Event X-10/Y-12 Oak Ridge, TN 10 11 12 13 14 15 Local Event X-10/Y12 Oak Ridge, TN Local Event Y-12 Oak Ridge, TN 16 Local Event X-10/Y12 Oak Ridge, TN 17 FWP Event Mound Miamisburg, OH 18 19 20 21 22 23 24 25 26 27 28 29 30 31 1 2 Legend Energy Employees Occupational Illness Compensation Program Act (EEOICPA) Events Joint Outreach Task Group (JOTG) Events Local Events Former Worker Program Medical Screening Program (FWP) Events Other Events This page was last updated on February 26, 2013 Retiree Meeting

343

Joint Outreach Task Group (JOTG) Calendar: February  

NLE Websites -- All DOE Office Websites (Extended Search)

February 2013 February 2013 Sunday Monday Tuesday Wednesday Thursday Friday Saturday 27 28 29 30 31 1 2 3 4 5 FWP Event Mound Miamisburg, OH Local Event Y-12 Oak Ridge, TN Local Event X-10 Oak Ridge, TN 6 Local Event X-10 Oak Ridge, TN Local Event Y-12 Oak Ridge, TN Local Event Y-12 Oak Ridge, TN FWP Event X-10/Y-12 Oak Ridge, TN 7 Local Event X-10/Y-12 Oak Ridge, TN FWP Event K-25 Oak Ridge, TN 8 9 10 11 12 FWP Event Fernald Harrison, OH 13 EEOICPA Event, Oak Ridge, TN EEOICPA Event, Oak Ridge National Laboratory (X-10) 14 FWP Event Mound Miamisburg, OH Local Event X-10 Oak Ridge, TN 15 16 17 18 19 20 EEOICPA Event, Los Alamos National Laboratory (LANL) 21 22 23 24 25 26 27 28 1 2 Legend Energy Employees Occupational Illness Compensation Program Act (EEOICPA) Events Joint Outreach Task Group (JOTG) Events Local Events Former Worker Program Medical Screening Program (FWP) Events

344

Jointly Sponsored Research Program. Final report  

SciTech Connect

The Jointly Sponsored Research Program (JSRP) is a US Department of Energy (DOE) program funded through the Office of Fossil Energy and administered at the Morgantown Energy Technology Center. Under this program, which has been in place since Fiscal Year 1990, DOE makes approximately $2.5 million available each year to the Energy and Environmental Research Center (EERC) to fund projects that are of current interest to industry but which still involve significant risk, thus requiring some government contribution to offset the risk if the research is to move forward. The program guidelines require that at least 50% of the project funds originate from nonfederal sources. Projects funded under the JSRP often originate under a complementary base program, which funds higher-risk projects. The projects funded in Fiscal Year 1996 addressed a wide range of Fossil Energy interests, including hot-gas filters for advanced power systems; development of cleaner, more efficient processing technologies; development of environmental control technologies; development of environmental remediation and reuse technologies; development of improved analytical techniques; and development of a beneficiation technique to broaden the use of high-sulfur coal. Descriptions and status for each of the projects funded during the past fiscal year are included in Section A of this document, Statement of Technical Progress.

NONE

1997-07-01T23:59:59.000Z

345

Joint Outreach Task Group (JOTG) Calendar: March  

NLE Websites -- All DOE Office Websites (Extended Search)

March 2013 March 2013 Sunday Monday Tuesday Wednesday Thursday Friday Saturday 24 25 26 27 28 1 2 3 4 5 FWP Event Mound Miamisburg, OH 6 Local Event X-10 Oak Ridge, TN Local Event Y-12 Oak Ridge, TN Local Event Y-12 Oak Ridge, TN FWP Event X-10/Y-12 Oak Ridge, TN 7 Local Event X-10/Y-12 Oak Ridge, TN FWP Event K-25 Oak Ridge, TN 8 9 10 11 12 Local Event X-10 Oak Ridge, TN EEOICPA Event, Augusta, GA 13 14 Local Event X-10 Oak Ridge, TN 15 16 17 18 19 Local Event X-10/Y-12 Oak Ridge, TN 20 21 FWP Event Mound Miamisburg, OH 22 23 24 25 26 27 28 29 30 31 1 2 3 4 5 6 Legend Energy Employees Occupational Illness Compensation Program Act (EEOICPA) Events Joint Outreach Task Group (JOTG) Events Local Events Former Worker Program Medical Screening Program (FWP) Events Other Events This page was last updated on February 26, 2013 Retiree Breakfast

346

Waste generator services implementation plan  

SciTech Connect

Recurring waste management noncompliance problems have spurred a fundamental site-wide process revision to characterize and disposition wastes at the Idaho National Engineering and Environmental Laboratory. The reengineered method, termed Waste Generator Services, will streamline the waste acceptance process and provide waste generators comprehensive waste management services through a single, accountable organization to manage and disposition wastes in a timely, cost-effective, and compliant manner. This report outlines the strategy for implementing Waste Generator Services across the INEEL. It documents the culmination of efforts worked by the LMITCO Environmental Management Compliance Reengineering project team since October 1997. These efforts have included defining problems associated with the INEEL waste management process; identifying commercial best management practices; completing a review of DOE Complex-wide waste management training requirements; and involving others through an Integrated Process Team approach to provide recommendations on process flow, funding/charging mechanisms, and WGS organization. The report defines the work that will be performed by Waste Generator Services, the organization and resources, the waste acceptance process flow, the funding approach, methods for measuring performance, and the implementation schedule and approach. Field deployment will occur first at the Idaho Chemical Processing Plant in June 1998. Beginning in Fiscal Year 1999, Waste Generator Services will be deployed at the other major INEEL facilities in a phased approach, with implementation completed by March 1999.

Mousseau, J.; Magleby, M.; Litus, M.

1998-04-01T23:59:59.000Z

347

SEALING LARGE-DIAMETER CAST-IRON PIPE JOINTS UNDER LIVE CONDITIONS  

SciTech Connect

Utilities in the U.S. operate over 75,000 km (47,000 miles) of old cast-iron pipes for gas distribution. The bell-and-spigot joints tend to leak as these pipes age. Current repair practices are costly and highly disruptive. The objective of this program is to design, test and commercialize a robotic system capable of sealing multiple cast-iron bell and spigot joints from a single pipe entry point. The proposed system will perform repairs while the pipe remains in service by traveling through the pipe, cleaning each joint surface, and attaching a stainless-steel sleeve lined with an epoxy-impregnated felt across the joint. This approach will save considerable time and labor, avoid traffic disruption, and eliminate any requirement to interrupt service (which results in enormous expense to utilities). Technical challenges include: (1) repair sleeves must compensate for diametric variation and eccentricity of cast-iron pipes; (2) the assembly must travel long distances through pipes containing debris; (3) the pipe wall must be effectively cleaned in the immediate area of the joint to assure good bonding of the sleeve; and (4) an innovative bolt-on entry fitting is required to conduct repair operations on live mains. The development effort is divided into eleven tasks. Task 1--Program Management was previously completed. Two reports, one describing the program management plan and the other consisting of the technology assessment, were submitted to the DOE COR in the first quarter. Task 2--Establishment of Detailed Design Specifications and Task 3--Design and Fabricate Ratcheting Stainless-Steel Repair Sleeves are now well underway. First-quarter activities included conducting detailed analyses to determine the capabilities of coiled-tubing locomotion for entering and repairing gas mains and the first design iteration of the joint-sealing sleeve. The maximum horizontal reach of coiled tubing inside a pipeline before buckling prevents further access was calculated for a wide range of coiled-tubing string designs and pipe environments. Work conducted in the second quarter consisted of: (1) selecting a preferred pan/zoom/tilt camera; (2) initiating design of the digital control electronics and switching power supply for the control and operation of the in-pipe robotic modules; (3) continuing design of the repair sleeve and (4) initial testing of the wall-cleaning device. Most recently, activities in the third quarter included: (1) development of the system's pan/zoom/tilt camera control electronics and operating software, and implementing these in the surface and downhole modules and (2) further testing of the wall-cleaning elements used to clean the inside of the bell and spigot joints. Details of these activities are described in the body of the report along with a summary of events scheduled for the fourth quarter.

Kiran M. Kothari; Gerard T. Pittard

2003-01-01T23:59:59.000Z

348

SEALING LARGE-DIAMETER CAST-IRON PIPE JOINTS UNDER LIVE CONDITIONS  

SciTech Connect

Utilities in the U.S. operate over 75,000 km (47,000 miles) of old cast-iron pipes for gas distribution. The bell-and-spigot joints tend to leak as these pipes age. Current repair practices are costly and highly disruptive. The objective of this program is to design, test and commercialize a robotic system capable of sealing multiple cast-iron bell and spigot joints from a single pipe entry point. The proposed system will perform repairs while the pipe remains in service by traveling through the pipe, cleaning each joint surface, and attaching a stainless-steel sleeve lined with an epoxy-impregnated felt across the joint. This approach will save considerable time and labor, avoid traffic disruption, and eliminate any requirement to interrupt service (which results in enormous expense to utilities). Technical challenges include: (1) repair sleeves must compensate for diametric variation and eccentricity of cast-iron pipes; (2) the assembly must travel long distances through pipes containing debris; (3) the pipe wall must be effectively cleaned in the immediate area of the joint to assure good bonding of the sleeve; and (4) an innovative bolt-on entry fitting is required to conduct repair operations on live mains. The development effort is divided into eleven tasks. Task 1-Program Management was previously completed. Two reports, one describing the program management plan and the other consisting of the technology assessment, were submitted to the DOE COR in the first quarter. Task 2-Establishment of Detailed Design Specifications and Task 3-Design and Fabricate Ratcheting Stainless-Steel Repair Sleeves are now well underway. First-quarter activities included conducting detailed analyses to determine the capabilities of coiled-tubing locomotion for entering and repairing gas mains and the first design iteration of the joint-sealing sleeve. The maximum horizontal reach of coiled tubing inside a pipeline before buckling prevents further access was calculated for a wide range of coiled-tubing string designs and pipe environments. Work conducted in the second quarter consisted of: (1) selecting a preferred pan/zoom/tilt camera; (2) initiating design of the digital control electronics and switching power supply for the control and operation of the in-pipe robotic modules; (3) continuing design of the repair sleeve and (4) initial testing of the wall-cleaning device. Activities in the third quarter included: (1) development of the system's pan/zoom/tilt camera control electronics and operating software, and implementing these in the surface and downhole modules and (2) further testing of the wall-cleaning elements used to clean the inside of the bell and spigot joints. Most recently, fourth quarter developments were centered on designing and testing the pipe-wall cleaning device including the selection of the drive motor and its control electronics. In addition, efforts were also focused on the design of the repair sleeve. Details of these activities are described in the body of the report along with a summary of events scheduled for the next quarter.

Kiran M. Kothari; Gerard T. Pittard

2003-06-01T23:59:59.000Z

349

Secretary Bodman, Director Rumyantsev Issue Joint Statement on Bratislava  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Bodman, Director Rumyantsev Issue Joint Statement on Bodman, Director Rumyantsev Issue Joint Statement on Bratislava Nuclear Security Initiatives Secretary Bodman, Director Rumyantsev Issue Joint Statement on Bratislava Nuclear Security Initiatives November 9, 2005 - 2:20pm Addthis WASHINGTON, DC - U.S. Secretary of Energy Samuel Bodman and Russian Federal Atomic Energy Agency Director, Aleksandr Rumyantsev today released a joint statement on the status of the Bratislava Nuclear Security Initiative. The Bratislava Initiative was announced by President George W. Bush and Russian President Vladimir Putin in February, 2005 and aims, in part, to reduce the threat of nuclear and radiological proliferation. "The United States and Russia bear unique responsibilities in the area of nuclear nonproliferation," Secretary Bodman said. "The Bratislava

350

Toledo Bend Project Joint Oper | Open Energy Information  

Open Energy Info (EERE)

Bend Project Joint Oper Bend Project Joint Oper Jump to: navigation, search Name Toledo Bend Project Joint Oper Place Texas Utility Id 19048 Utility Location Yes Ownership S NERC Location SERC NERC SERC Yes Operates Generating Plant Yes Activity Generation Yes Activity Wholesale Marketing Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png No rate schedules available. Average Rates No Rates Available References ↑ "EIA Form EIA-861 Final Data File for 2010 - File1_a" Retrieved from "http://en.openei.org/w/index.php?title=Toledo_Bend_Project_Joint_Oper&oldid=411678"

351

OMB and CEQ Joint Memorandum on Environmental Collaboration and Conflict  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

OMB and CEQ Joint Memorandum on Environmental Collaboration and OMB and CEQ Joint Memorandum on Environmental Collaboration and Conflict Resolution OMB and CEQ Joint Memorandum on Environmental Collaboration and Conflict Resolution This Office of Management and Budget (OMB) and Council on Environmental Quality (CEQ) joint memorandum expands and builds on the November 28, 2005, Environmental Conflict Resolution (ECR) Memorandum, directing departments and agencies to increase the appropriate and effective use of third-party assisted environmental collaboration as well as environmental conflict resolution to resolve problems and conflicts that arise in the context of environmental, public lands, or natural resources issues, including matters related to energy, transportation, and water and land management. This memorandum supersedes and broadens the 2005 memorandum on ECR by

352

Joint Outreach Task Group Former Workers Screening Program | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Joint Joint Outreach Task Group Former Workers Screening Program Joint Outreach Task Group Former Workers Screening Program The Joint Outreach Task Group (JOTG) includes representatives from HSS, Department of Labor (DOL), the National Institute for Occupational Safety and Health (NIOSH), the Offices of the Ombudsman for DOL and NIOSH, and the DOE-funded FWP projects. The JOTG was established in 2009 under the premise that agencies/programs with common goals can work together by combining resources and coordinating outreach efforts. Each involved agency has a different mission, but the missions are complementary. By working together, the agencies are better able to serve the DOE workforce. The JOTG focuses on educating the former workers on the programs and resources available to them.

353

SEISMIC CAPACITY OF THREADED, BRAZED AND GROOVED PIPE JOINTS  

Energy.gov (U.S. Department of Energy (DOE))

Seismic Capacity of Threaded, Brazed and Grooved Pipe Joints Brent Gutierrez, PhD, PE George Antaki, PE, F.ASME DOE NPH Conference October 25-26, 2011

354

Sandia National Laboratories: "Bionic" Liquids from Lignin: Joint...  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy and ClimateECEnergyRenewable EnergyBiofuels"Bionic" Liquids from Lignin: Joint BioEnergy Institute Results Pave the Way for Closed-Loop Biofuel Refineries "Bionic" Liquids...

355

Joint Statement on Multinational Cooperation on High-Density...  

National Nuclear Security Administration (NNSA)

Release Mar 25, 2014 The White House Office of the Press Secretary Belgium, France, Germany, the Republic of Korea and the United States, the parties to this joint statement...

356

Joint Outreach Task Group Video Series | Department of Energy  

Office of Environmental Management (EM)

Video Series Joint Outreach Task Group Video Series The purpose of this video series is to provide an overview of the roles and responsibilities of the federal government offices...

357

Geothermal: Sponsored by OSTI -- Joint Egypt/United States report...  

Office of Scientific and Technical Information (OSTI)

Joint EgyptUnited States report on EgyptUnited States cooperative energy assessment. Volume 4 of 5 Vols. Annexes 6--10 Geothermal Technologies Legacy Collection HelpFAQ | Site...

358

DOE-EERE/NIST Joint Workshop on Combinatorial Materials Science...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NIST Joint Workshop on Combinatorial Materials Science for Applications in Energy The Hydrogen Storage Subprogram of the U.S. Department of Energy co-hosted with the NIST...

359

U.S.-Brazil Strategic Energy Dialogue Joint Report | Department...  

Office of Environmental Management (EM)

of America and the Federative Republic of Brazil On the Strategic Energy Dialogue U.S. and Brazil Bilateral Collaboration on Biofuels U.S.-Brazil Binational Joint Action Plan...

360

Montana Joint Application for Proposed Work in Streams, Lakes...  

Open Energy Info (EERE)

OpenEI Reference LibraryAdd to library Web Site: Montana Joint Application for Proposed Work in Streams, Lakes and Wetlands Webpage Abstract Provides access to application forms...

Note: This page contains sample records for the topic "joint implementation kyoto" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Joint Institute for Neutron Sciences | ornl.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Joint Institute for Neutron Sciences Joint Institute for Neutron Sciences SHARE Joint Institute for Neutron Sciences JINS is located on Chestnut Ridge within the 80-acre SNS site, part of Oak Ridge National Laboratory. The Joint Institute for Neutron Sciences (JINS) was founded as a collaborative effort between Oak Ridge National Laboratory (ORNL) and The University of Tennessee to promote the use of neutron scattering in various fields of research. Through worldwide collaborations between researchers of the biological and life sciences, energy sciences, polymer science, condensed matter physics and computational sciences, a synergistic consortium will be created at ORNL to elevate the field of neutron sciences to a new level of efficacy for industry, medicine and frontier research. The goal of JINS is to serve as a gateway for users of the Spallation

362

Remote controlled vacuum joint closure mechanism  

DOE Patents (OSTI)

A remotely operable and maintainable vacuum joint closure mechanism for a noncircular aperture is disclosed. The closure mechanism includes an extendible bellows coupled at one end to a noncircular duct and at its other end to a flange assembly having sealed grooves for establishing a high vacuum seal with the abutting surface of a facing flange which includes an aperture forming part of the system to be evacuated. A plurality of generally linear arrangements of pivotally coupled linkages and piston combinations are mounted around the outer surface of the duct and aligned along the length thereof. Each of the piston/linkage assemblies is adapted to engage the flange assembly by means of a respective piston and is further coupled to a remote controlled piston drive shaft to permit each of the linkages positioned on a respective flat outer surface of the duct to simultaneously and uniformly displace a corresponding piston and the flange assembly with which it is in contact along the length of the duct in extending the bellows to provide a high vacuum seal between the movable flange and the facing flange. A plurality of latch mechanisms are also pivotally mounted on the outside of the duct. A first end of each of the latch mechanisms is coupled to a remotely controlled latch control shaft for displacing the latch mechanism about its pivot point. In response to the pivoting displacement of the latch mechanism, a second end thereof is displaced so as to securely engage the facing flange and maintain the high vacuum seal established by the displacement of the flange assembly and extension of the bellows without displacing the entire duct.

Doll, D.W.; Hager, E.R.

1984-02-22T23:59:59.000Z

363

Implementation Regulations 3TU MSc Sustainable Energy Technology Delft, 2014-2015 THE IMPLEMENTATION REGULATIONS  

E-Print Network (OSTI)

Implementation Regulations 3TU MSc Sustainable Energy Technology ­ Delft, 2014-2015 THE IMPLEMENTATION REGULATIONS 2014 - 2015 3TU MASTER'S DEGREE PROGRAMME Sustainable Energy Technology - Delft (SET) DELFT UNIVERSITY OF TECHNOLOGY #12;Implementation Regulations MSc Sustainable Energy Technology SET

364

Prediction of wear and stresses while drilling through a riser flex joint  

SciTech Connect

Flex joints in risers introduce abrupt directional changes along the drillstring. High drillstring stresses and flex joint wear rates are introduced, particularly when the drillstring tension is high. An analysis procedure is presented which finds the drillstring/flex joint contact loads in the vicinity of the flex joint as a function of the tension in the drillstring at the flex joint. The tensile and contact loads of the drillstring at the riser are used to estimate the wear rate on the flex joint and the axial and bending stresses in the drillstring. This example shows the value of the procedure in estimating maximum allowable angles for the flex joint.

Paslay, P.R. (Techaid Corp., Arlington, TX (United States)); Cernocky, E.P. (Shell Development Co., Houston, TX (United States))

1994-03-01T23:59:59.000Z

365

Policies for implementing network firewalls  

SciTech Connect

Corporate networks are frequently protected by {open_quotes}firewalls{close_quotes} or gateway systems that control access to/from other networks, e.g., the Internet, in order to reduce the network`s vulnerability to hackers and other unauthorized access. Firewalls typically limit access to particular network nodes and application protocols, and they often perform special authentication and authorization functions. One of the difficult issues associated with network firewalls is determining which applications should be permitted through the firewall. For example, many networks permit the exchange of electronic mail with the outside but do not permit file access to be initiated by outside users, as this might allow outside users to access sensitive data or to surreptitiously modify data or programs (e.g., to intall Trojan Horse software). However, if access through firewalls is severely restricted, legitimate network users may find it difficult or impossible to collaborate with outside users and to share data. Some of the most serious issues regarding firewalls involve setting policies for firewalls with the goal of achieving an acceptable balance between the need for greater functionality and the associated risks. Two common firewall implementation techniques, screening routers and application gateways, are discussed below, followed by some common policies implemented by network firewalls.

Brown, C.D.

1994-05-01T23:59:59.000Z

366

Examining the Relationship Between Implementation and Student Outcomes: The Application of an Implementation Measurement Framework .  

E-Print Network (OSTI)

??The current study evaluated the implementation of evidence-based reading interventions using a multifaceted implementation measurement approach. Multilevel modeling was used to examine how three direct… (more)

Spear, Caitlin

2015-01-01T23:59:59.000Z

367

Unveiling the Implementation Guide | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Implementing Industrial Energy Assessment Recommendations Building America Technology Solutions for New and Existing Homes: Foundation Heat Exchanger, Oak Ridge, Tennessee...

368

The Challenge of Limiting Greenhouse Gas Emissions Through Activities implemented Jointly in Developing Countries: A Brazilian Perspective  

E-Print Network (OSTI)

renewable energy is greater than in industrialized of these technologies in developing countriesin developing countries. such as renewable energydeveloping encourage development investments countries. in Appropriate energy mitigation renewable

La Rovere, Emilio Lebre

1998-01-01T23:59:59.000Z

369

Level Set Implementations on Unstructured Point Cloud  

E-Print Network (OSTI)

Level Set Implementations on Unstructured Point Cloud by HO, Hon Pong A Thesis Submitted;Level Set Implementations on Unstructured Point Cloud by HO, Hon Pong This is to certify that I have implementations on unstructured point cloud 15 3.1 Level set initialization

Duncan, James S.

370

Policy on University Subsidiaries, Technology Transfer Activities and Joint Venture Page 1 of 3 10.6 Policy on University Subsidiaries, Technology Transfer Activities and Joint Venture  

E-Print Network (OSTI)

Policy on University Subsidiaries, Technology Transfer Activities and Joint Venture Page 1 of 3 10.6 Policy on University Subsidiaries, Technology Transfer Activities and Joint Venture Policy Number & Name: 10.6 Policy on University Subsidiaries, Technology Transfer Activities and Joint Venture Approval

Yang, Eui-Hyeok

371

IMPLEMENTATION_PLAN_FINAL.cdr  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2 2 Environmental Justice Five-Year Implementation Plan ENERGY U.S. DEPARTMENT OF Table of Contents Forward . . . . . . . . . . . . . . . . . . . . . . . 1 Introduction . . . . . . . . . . . . . . . . . . . 2 Vision Statement. . . . . . . . . . . . . . . . 5 Environmental Justice Core Principles. . . . . . . . . . . . . . . . . . 5 Goal 1 . . . . . . . . . . . . . . . . . . . . . . . 6 Goal 2 . . . . . . . . . . . . . . . . . . . . . . . . 7 Goal 3 . . . . . . . . . . . . . . . . . . . . . . 10 Goal 4 . . . . . . . . . . . . . . . . . . . . . . . 11 Summary and Conclusion . . . . . . . . 12 Forward The Department of Energy (DOE) sets an ambitious Departmental agenda that will guide our environmental justice activities for the next five years. It sets forth an aggressive agenda, and is required to do so if we are to meet the environmental justice demands that are spelled out in Presidential Executive Order 12898 and the Department's . This is our initial attempt to prepare a plan of this nature. It will support Departmental environmental

372

Diamond turning machine controller implementation  

SciTech Connect

The standard controller for a Pnuemo ASG 2500 Diamond Turning Machine, an Allen Bradley 8200, has been replaced with a custom high-performance design. This controller consists of four major components. Axis position feedback information is provided by a Zygo Axiom 2/20 laser interferometer with 0.1 micro-inch resolution. Hardware interface logic couples the computers digital and analog I/O channels to the diamond turning machine`s analog motor controllers, the laser interferometer, and other machine status and control information. It also provides front panel switches for operator override of the computer controller and implement the emergency stop sequence. The remaining two components, the control computer hardware and software, are discussed in detail below.

Garrard, K.P.; Taylor, L.W.; Knight, B.F.; Fornaro, R.J.

1988-12-01T23:59:59.000Z

373

Implementing Arrangement Between the U.S. Department of Energy and the  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Initiative on Advanced Nuclear Initiative on Advanced Nuclear Technologies Implementing Arrangement Between the U.S. Department of Energy and the Agency of Natural Resources and Energy of Japan Concerning Cooperation in the Joint Nuclear Energy Research Initiative on Advanced Nuclear Technologies Noting further that representatives of DOE's Office of Nuclear Energy, Science, and Technology and ANRE have identified common interests in innovative light water reactor technologies, including supercritical light water, innovative processing technologies of oxide fuel for light water reactor, and innovative fuel technologies using solvent extraction. 4.5.1.1.3.5_japan_agreement3.pdf More Documents & Publications Implementing Arrangement Between the U.S. Department of Energy and the MInistry of Education, Culture, Sports, Science, and Technology of Japan

374

Rooted in Wonder: Joint Genome Institute Study Reveals Amazing World  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Rooted in Wonder: Joint Genome Institute Study Reveals Amazing Rooted in Wonder: Joint Genome Institute Study Reveals Amazing World Underfoot Rooted in Wonder: Joint Genome Institute Study Reveals Amazing World Underfoot August 13, 2012 - 2:33pm Addthis By developing a better understanding of the microbes that affect the growth of other plants (crops like corn or wheat) researchers may be able to improve their growth -- or provide better care for them in times of drought. By developing a better understanding of the microbes that affect the growth of other plants (crops like corn or wheat) researchers may be able to improve their growth -- or provide better care for them in times of drought. Charles Rousseaux Charles Rousseaux Senior Writer, Office of Science What Is A Weed It's also known as a mouse-ear cress. The scientific name is Arababidopsis thaliana.

375

ETDE/INIS Joint Thesaurus | Scientific and Technical Information Program  

Office of Scientific and Technical Information (OSTI)

ETDE/INIS Joint Thesaurus ETDE/INIS Joint Thesaurus Print page Print page Email page Email page As the DOE representative in these international STI exchanges, OSTI provides the U.S. input using the ETDE/INIS Joint Thesaurus, which contains the controlled terminology for indexing all information within the subject scopes of the International Nuclear Information System (INIS) and the Energy Technology Data Exchange (ETDE). It contains 21,147 valid descriptors and 9,114 forbidden terms. The terminology is intended for use in subject descriptions for input or retrieval of information in these systems. The vocabulary is updated routinely, therefore please refer to the supplements for cumulative references for changes made to the initial printing of the thesaurus. Last updated: February 17, 2011

376

Joint Outreach Task Group Video Series | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Joint Outreach Task Group Video Series Joint Outreach Task Group Video Series Joint Outreach Task Group Video Series Greeting: Inter-Agency Partnership, Commitment, and Service to the American workers The purpose of this video series is to provide an overview of the roles and responsibilities of the federal government offices and entities involved in the Energy Employees Occupational Illness Compensation Program Act (EEOIOCPA) and the Former Worker Medical Screening Program (FWP), two programs that serve eligible workers from the Department of Energy (DOE). In the interest of combining resources, since both the EEOICPA and FWP serve a similar population of workers, the federal entities have partnered to hold local outreach meetings in and around active or closed DOE sites. These meetings have been very successful, but we realize not everyone can

377

U.S. - Pakistan Joint Press Statement | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

- Pakistan Joint Press Statement - Pakistan Joint Press Statement U.S. - Pakistan Joint Press Statement March 13, 2006 - 11:50am Addthis ISLAMABAD, PAKISTAN - As agreed during President Bush's visit to Pakistan on 3-4 March 2006, U.S. Secretary of Energy Samuel Bodman visited Islamabad today to discuss a wide range of issues related to Pakistan's growing energy needs. Secretary Bodman's visit symbolizes the strengthened and expanded relationship between the United States and Pakistan over the last five years. Closer U.S.-Pakistan ties and cooperation have helped to bolster Pakistan's economy, which registered the second fastest growth in Asia last year. To continue this solid economic growth, Pakistan must have sufficient energy through a broad range of energy sources to ensure its energy security.

378

Low Dose Radiation Research Program: DOE / NASA Joint Funded Projects  

NLE Websites -- All DOE Office Websites (Extended Search)

DOE/NASA Joint Funded Projects DOE/NASA Joint Funded Projects NASA Source Photo Space explorers are subject to exposure to low dose ionizing radiation. Research that helps determine health risks from this exposure is funded by NASA and DOE. Source: NASA DOE's Low Dose Program and the National Aeronautics and Space Administration (NASA) jointly fund new research to develop a better scientific basis for understanding risks to humans from exposures to low doses or low fluences of ionizing radiation. Research must focus on elucidating molecular mechanisms and pathways involved in normal radiobiological responses to low dose exposure, and must have the potential to ultimately increase understanding of health outcomes from radiation exposures that are at or near current workplace exposure

379

Feature - U.S.-Sweden Joint PHEV Research  

NLE Websites -- All DOE Office Websites (Extended Search)

U.S.-Sweden Joint PHEV Research U.S.-Sweden Joint PHEV Research How the Smart Charge System Works How the Smart Charge System Works Looking to jointly develop new plug-in hybrid vehicle (PHEV) technology and accelerate its consumer acceptance and commercialization, the U.S. Department of Energy (DOE) and Sweden signed a Memorandum of Understanding (MOU) in July for a one year, $1 million cost-sharing agreement to be equally funded by DOE and the Swedish Energy Agency. Through contacts developed over many years conducting international technology assessment for the Department of Energy, Argonne National Laboratory initiated the MOU, which was signed by DOE Assistant Secretary Alexander Karsner and Director General of the Swedish Energy Agency Tomas KĂ„berger, on the Swedish island of Gotland. The ceremony included comments

380

2010 Joint Effectiveness Review of Hanford Bldg 336 Corrective Actions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Joint Assessment of the Effectiveness of Joint Assessment of the Effectiveness of Corrective Actions for the Building 336 Accident, July 2010 The U.S. Department of Energy, Office of Independent Oversight, within the Office of Health, Safety and Security (HSS), and the Richland Operations Office (RL) performed a joint effectiveness assessment of the corrective actions taken by Washington Closure Hanford, LLC (WCH) in response to the Building 336 Fall Event. The review was conducted from July 12-21, 2010, by a team consisting of four HSS and six RL personnel. The scope of the assessment included evaluation of work control, fall protection, quality assurance, and conduct of operations. Criteria Review and Approach Documents (CRADs) were generated for each functional area. The CRADs focused on the Judgments of Need (JONs) from the July 2009 Building 336 Fall

Note: This page contains sample records for the topic "joint implementation kyoto" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Schedule optimization study implementation plan  

SciTech Connect

This Implementation Plan is intended to provide a basis for improvements in the conduct of the Environmental Restoration (ER) Program at Hanford. The Plan is based on the findings of the Schedule Optimization Study (SOS) team which was convened for two weeks in September 1992 at the request of the U.S. Department of Energy (DOE) Richland Operations Office (RL). The need for the study arose out of a schedule dispute regarding the submission of the 1100-EM-1 Operable Unit (OU) Remedial Investigation/Feasibility Study (RI/FS) Work Plan. The SOS team was comprised of independent professionals from other federal agencies and the private sector experienced in environmental restoration within the federal system. The objective of the team was to examine reasons for the lengthy RI/FS process and recommend ways to expedite it. The SOS team issued their Final Report in December 1992. The report found the most serious impediments to cleanup relate to a series of management and policy issues which are within the control of the three parties managing and monitoring Hanford -- the DOE, U.S. Environmental Protection Agency (EPA), and the State of Washington Department of Ecology (Ecology). The SOS Report identified the following eight cross-cutting issues as the root of major impediments to the Hanford Site cleanup. Each of these eight issues is quoted from the SOS Report followed by a brief, general description of the proposed approach being developed.

Not Available

1993-11-01T23:59:59.000Z

382

Implementation Guidance, Drug Testing - December 3, 2007 | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Implementation Guidance, Drug Testing - December 3, 2007 Implementation Guidance, Drug Testing - December 3, 2007 December 3, 2007 Implementation guidance for applicants for, and...

383

CRAD, Criticality Safety Controls Implementation - May 31, 2013...  

Office of Environmental Management (EM)

Criticality Safety Controls Implementation - May 31, 2013 CRAD, Criticality Safety Controls Implementation - May 31, 2013 May 31, 2013 Criticality Safety Controls Implementation...

384

Stakeholder Engagement and Outreach: State Implementation Plans  

Wind Powering America (EERE)

State Implementation Plans State Implementation Plans State Implementation Plans are a policy vehicle that allow states and municipalities to receive emission reduction credit for wind power purchases. Under guidance issued by the U.S. Environmental Protection Agency in August 2004, States and municipalities can receive emission reduction credit in their State Implementation Plans for wind power purchases that reduce air emissions and help achieve attainment of the National Ambient Air Quality Standard for ozone. The National Renewable Energy Laboratory has developed model State Implementation Plan documentation to assist states in achieving this objective. For more information on State Implementation Plans, please see the following publications. Improving Regional Air Quality with Wind Power: Presentation

385

BUILDING TECHNOLOGIES PROGRAM Iowa Compliance Implementation  

NLE Websites -- All DOE Office Websites (Extended Search)

Iowa Iowa Compliance Implementation and Evaluation (CIE) Guide COMPLIANCE IMPLEMENTATION AND EVALUATION (CIE) GUIDE 2 This Guide is designed to assist state and local code jurisdictions in achieving statewide compliance with the 2009 International Energy Conservation Code (IECC) for residential buildings and ANSI/ASHRAE/IESNA Standard 90.1-2007 for commercial buildings. COMPLIANCE IMPLEMENTATION AND EVALUATION (CIE) GUIDE 3 Iowa WHAT'S INSIDE CIE Guide Overview-Flow Diagram ........................................................................................................................... 5 PART 1: Guide Overview .................................................................................................................................................

386

Wireless System Considerations When Implementing NERC Critical  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Wireless System Considerations When Implementing NERC Critical Wireless System Considerations When Implementing NERC Critical Infrastructure Protection Standards Wireless System Considerations When Implementing NERC Critical Infrastructure Protection Standards Energy asset owners are facing a monumental challenge as they address compliance with the North American Electric Reliability Corporation (NERC) Critical Infrastructure Protection (CIP) Standards (CIP-002 through CIP-009). The increased use of wireless technologies and their introduction into control center networks and field devices compound this challenge, as ambiguity exists regarding the applicability of the CIP requirements to wireless networking technologies. Wireless System Considerations When Implementing NERC Critical Infrastructure Protection Standards More Documents & Publications

387

Sandia National Laboratories: implement energy storage projects  

NLE Websites -- All DOE Office Websites (Extended Search)

implement energy storage projects 2013 Electricity Storage Handbook Published On July 31, 2013, in Energy, Energy Assurance, Energy Storage, Energy Storage Systems, Energy Surety,...

388

Implementation of motion capture support in smartphones.  

E-Print Network (OSTI)

??This thesis investigates the feasibility of developing cross-platform smart phone applications that utilize the Qualisys motion capture system. An Application Programming Interface that implements an… (more)

Martinsson, Johannes

2010-01-01T23:59:59.000Z

389

Energy Sector Cybersecurity Framework Implementation Guidance...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Cybersecurity Framework Implementation Guidance - Notice of Public Comment: Federal Register Notice, Volume 79, No. 177, September 12, 2014 Energy Sector Cybersecurity Framework...

390

Creating a Climate for Successful Project Implementation  

Energy.gov (U.S. Department of Energy (DOE))

This presentation acknowledges the difficulty implementing identified opportunities for energy efficiency in order to achieve savings and offers strategies to overcome that difficulty.

391

Energy Sector Cybersecurity Framework Implementation Guidance  

Energy Savers (EERE)

JANUARY 2015 ENERGY SECTOR CYBERSECURITY FRAMEWORK IMPLEMENTATION GUIDANCE U.S. DEPARTMENT OF ENERGY OFFICE OF ELECTRICITY DELIVERY AND ENERGY RELIABILITY Energy Sector...

392

Council on Environmental Quality - Regulations for Implementing...  

Open Energy Info (EERE)

LibraryAdd to library Legal Document- StatuteStatute: Council on Environmental Quality - Regulations for Implementing the Procedural Provisions of the NEPALegal Abstract...

393

Departmental Personnel Security - Implementation Guidance | Department...  

Office of Environmental Management (EM)

Overview of Security ClearanceAccess Authorization Process for Applicants Drug Testing Implementation Guidance December 3, 2007 Template for Contractor Company Template for...

394

Implementation of Department of Energy Oversight Policy  

Directives, Delegations, and Requirements

This Order implements the policy that establishes a Department-wide oversight process to protect the public, workers, environment, and national security assets effectively through continuous improvement.

2011-04-25T23:59:59.000Z

395

Building America Expert Meeting: Retrofit Implementation - A...  

Energy Savers (EERE)

projects underway across the United States, and included representatives from utilities, energy program implementation firms, affordable housing agencies, and the financing...

396

New Mexico Antidegradation Policy Implementation Procedure |...  

Open Energy Info (EERE)

Implementation Procedure Jump to: navigation, search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance - GuideHandbook: New Mexico Antidegradation Policy...

397

Criticality Safety Controls Implementation Inspection Criteria...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Criticality Safety Controls Implementation Inspection Criteria, Approach, and Lines of Inquiry, October 23, 2009, (HSS CRAD 64-18, Rev 0 ) Criticality Safety Controls...

398

Plans, Implementation, and Results | Department of Energy  

Office of Environmental Management (EM)

through an ongoing process of planning and analysis, implementation, and review. This Web page includes links to documents that support and document the program management...

399

Preparing for Project Implementation Assigning Accountability...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Assigning Accountability for Each Project, April 14, 2010 Preparing for Project Implementation Assigning Accountability for Each Project, April 14, 2010 Assigning Accountability...

400

Energy Management System Implementation ? Do and Check  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

in management systems * DOE pilots in Northwest, Midwest, and California * Online web tools for energy management system implementation Who are we? Dorothy Fisher Atwood WC...

Note: This page contains sample records for the topic "joint implementation kyoto" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Energy Management System Implementation ? First Webinar- Overview  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

W1-1 | Advanced Manufacturing Office eere.energy.gov ADVANCED MANUFACTURING OFFICE Energy Management System Implementation - First Webinar- Overview Deann Desai and Ed Hardison 4...

402

Implementation of Title V in California  

SciTech Connect

This presentation provides information on California`s Title V operating permit programs for stationary sources mandated by the 1990 Clean Air Act amendments. It covers background, applicability, regulatory history, requirements, and issues. In addition, specific information is provided on the progress of Title V implementation in California, including: the roles of implementing agencies, the status of district Title V programs, number and distribution of Title V sources, cost of Title V implementation, and highlights of Title V implementation in the State. The question and answer format is intended to facilitate easy access to specific information related to the Title V operating permit programs in California.

Werner, B.; Cook, B.

1996-12-31T23:59:59.000Z

403

State Energy Program: Kentucky Implementation Model Resources  

Energy.gov (U.S. Department of Energy (DOE))

Below are resources associated with the U.S. Department of Energy's Weatherization and Intergovernmental Programs Office State Energy Program Kentucky Implementation Model.

404

Seventh Annual DOE Joint Genome Institute User Meeting Sponsored By  

NLE Websites -- All DOE Office Websites (Extended Search)

Seventh Annual Seventh Annual DOE Joint Genome Institute User Meeting Sponsored By U.S. Department of Energy Office of Science March 20-22, 2012 Walnut Creek Marriott Walnut Creek, California Contents Speaker Presentations .......................................................................................................... 1 Poster Presentations ........................................................................................................... 13 Attendees ............................................................................................................................ 83 Author Index ....................................................................................................................... 89 Abstracts alphabetical by speaker

405

Cognitive Single Carrier Systems: Joint Impact of Multiple Licensed Transceivers  

E-Print Network (OSTI)

Cognitive Single Carrier Systems: Joint Impact of Multiple Licensed Transceivers Kyeong Jin Kim of interference from multiple licensed transceivers on cognitive underlay single carrier systems is examined, and 3) interference power from the primary transmitters. For this cognitive underlay single carrier

Elkashlan, Maged

406

IST EPFL Joint doctoral Initiative Thesis Topic Proposal Form  

E-Print Network (OSTI)

IST ­ EPFL Joint doctoral Initiative Thesis Topic Proposal Form TITLE: Pump-turbines with variable of the use of turbines and pump-turbines with variable speed drives in pressurized water pipe systems (e Numerical description of the characteristic curves of pumps/pump-turbines based on rated conditions

Instituto de Sistemas e Robotica

407

MINUTES OF THE JOINT OCCUPATIONAL HEALTH & SAFETY COMMITTEE (JOHSC) MEETING  

E-Print Network (OSTI)

, e.g. the Health Care Corporation, Basic Medical Sciences, Pharmacy, etc. and that no definite safetyMINUTES OF THE JOINT OCCUPATIONAL HEALTH & SAFETY COMMITTEE (JOHSC) MEETING Wednesday, February 7 as the Committee's newest member. Dr. LeFort has completed the Occupational Health & Safety Certification Training

deYoung, Brad

408

Joint Energy Management and Resource Allocation in Rechargeable Sensor Networks  

E-Print Network (OSTI)

the batteries and extend the network's lifetime. Many forms of energy such as solar, wind, water flow, thermalJoint Energy Management and Resource Allocation in Rechargeable Sensor Networks Ren-Shiou Liu CSE@ece.osu.edu Abstract--Energy harvesting sensor platforms have opened up a new dimension to the design of network

Sinha, Prasun

409

Energy from Waste UK Joint Statement on Energy from Waste  

E-Print Network (OSTI)

Energy from Waste UK Joint Statement on Energy from Waste Read more overleaf Introduction Energy from waste provides us with an opportunity for a waste solution and a local source of energy rolled,itcan onlyaddressaportionofthewastestream andisnotsufficientonitsown. Energy obtained from the combustion of residual waste (Energy from

410

Bioinspired, mechanical, deterministic fractal model for hierarchical suture joints  

Science Journals Connector (OSTI)

Many biological systems possess hierarchical and fractal-like interfaces and joint structures that bear and transmit loads, absorb energy, and accommodate growth, respiration, and/or locomotion. In this paper, an elastic deterministic fractal composite mechanical model was formulated to quantitatively investigate the role of structural hierarchy on the stiffness, strength, and failure of suture joints. From this model, it was revealed that the number of hierarchies (N) can be used to tailor and to amplify mechanical properties nonlinearly and with high sensitivity over a wide range of values (orders of magnitude) for a given volume and weight. Additionally, increasing hierarchy was found to result in mechanical interlocking of higher-order teeth, which creates additional load resistance capability, thereby preventing catastrophic failure in major teeth and providing flaw tolerance. Hence, this paper shows that the diversity of hierarchical and fractal-like interfaces and joints found in nature have definitive functional consequences and is an effective geometric-structural strategy to achieve different properties with limited material options in nature when other structural geometries and parameters are biologically challenging or inaccessible. This paper also indicates the use of hierarchy as a design strategy to increase design space and provides predictive capabilities to guide the mechanical design of synthetic flaw-tolerant bioinspired interfaces and joints.

Yaning Li; Christine Ortiz; Mary C. Boyce

2012-03-01T23:59:59.000Z

411

Executive Summary Joint Proposal of the Northwest Utilities  

E-Print Network (OSTI)

1 Executive Summary Joint Proposal of the Northwest Utilities The Future Role of BPA Regarding transfer from BPA to the region's utilities much of the responsibility for securing additional electricity a slice contract, a utility receives power equal to a fixed percentage of the electricity produced

412

JOINT INSTITUTE FOR THE STUDY OF THE ATMOSPHERE & OCEAN (JISAO)  

E-Print Network (OSTI)

-dimensional datasets. SCIENCE HIgHLIgHTS MARINE ECOSYSTEMS / FISHERIES RECRUITMENT Collaborations JOINT INSTITUTE FOR THE STUDY OF THE ATMOSPHERE & OCEAN (JISAO) ANNUAL REPORT JULy 1, 2005 ­ JUNE Management and Administration 20 ProjEct SummariES 23 Marine Ecosystems 24 Climate 44 Environmental Chemistry

Rigor, Ignatius G.

413

Joint Incremental Disfluency Detection and Dependency Parsing Matthew Honnibal  

E-Print Network (OSTI)

repairs using a novel non-monotonic tran- sition system, and includes several novel classes of features. For comparison, we evaluated two pipeline systems, us- ing state-of-the-art disfluency detectors. The joint model language understanding pipeline, because disfluencies have proven problematic for PCFG parsing models

414

Numerical Model of a Tensioner System and Flex Joint  

E-Print Network (OSTI)

, to allow for static and dynamic simulation of a TTR connected to a floating structure through a tensioner system or buoyancy can, and a SCR connected to a floating structure through a flex joint. A tensioner system usually consists of three to four...

Huang, Han

2013-07-27T23:59:59.000Z

415

Joint probability of precipitation and discharge deficits in the Netherlands  

E-Print Network (OSTI)

Joint probability of precipitation and discharge deficits in the Netherlands Jules J. Beersma and T. Adri Buishand Royal Netherlands Meteorological Institute, De Bilt, The Netherlands Received 14 April] The Netherlands are situated at the downstream end of the Rhine River. A large part of the country can be supplied

Beersma, Jules

416

U.S.-Brazil Binational Joint Action Plan | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

U.S.-Brazil Binational Joint Action Plan U.S.-Brazil Binational Joint Action Plan U.S.-Brazil Binational Energy Working Group, formed on July 20, 2010, when DOE and the Brazilian...

417

E-Print Network 3.0 - arthritis wrist joints Sample Search Results  

NLE Websites -- All DOE Office Websites (Extended Search)

of joint c Femoral AnteversionRetroversion c Flat Foot (Pes Planus) c Ganglion Wrist c Gout c... : BIRTHDATE: PCP: c AC Joint Inflammation c ACL Insufficiency c Adhesive...

418

United States-Russia Joint Statement on the Results of the Nuclear...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

States-Russia Joint Statement on the Results of the Nuclear Energy and Nuclear Security Working Group Meeting United States-Russia Joint Statement on the Results of the Nuclear...

419

Joint evaluation report on Integrated Engineering Information Systems (IEIS) p.1 March 16, 1999  

E-Print Network (OSTI)

, and manage information systems in view of the rapid introduction of innovations based on informationJoint evaluation report on Integrated Engineering Information Systems (IEIS) p.1 Stockholm March 16, 1999 Joint evaluation report on INTEGRATED ENGINEERING INFORMATION SYSTEMS (IEIS

Risch, Tore

420

Design of a biomimetic pectoral fin joint in an artificial fish  

E-Print Network (OSTI)

A biomimetic design of the muscle joint in a pectoral fish fin was produced based on comparisons with four design models. All four design models consisted of a mechanical joint connection and incorporated the functional ...

Peńa, Vanessa, 1982-

2004-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "joint implementation kyoto" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

E-Print Network 3.0 - adhesive composite joints Sample Search...  

NLE Websites -- All DOE Office Websites (Extended Search)

Apr... of Structural Adhesive Joints July 1994 M.A.Sc. D. Plausinis Time-Dependent Fracture of Adhesive Joints Aug... . 1994 Ph.D. G. Fernlund Design of Structural ... Source:...

422

E-Print Network 3.0 - au-sn solder joints Sample Search Results  

NLE Websites -- All DOE Office Websites (Extended Search)

that which is already included in your... joint and you should remove the solder (with a pump, or a solder wick) and redo it. - Take care... joints, bridges across adjacent tracks...

423

UCSD Implementing Procedures Effective Date: July 1, 1996 Page 1  

E-Print Network (OSTI)

UCSD Implementing Procedures (HR-S-1/Definitions of Terms B. UCSD Implementing Procedures 14/Affirmative Action C. UCSD Implementing Procedures 23/Performance Appraisal D. UC PPSM 30/Salary E. UCSD Implementing Procedures 30/Salary Equity Increase

Tsien, Roger Y.

424

INTRODUCTION: The basal joint of the thumb, or the thumb carpometacarpal (CMC) joint (Fig. 1), is a saddle-shaped  

E-Print Network (OSTI)

instability, incongruent loading of the joint, and subsequent damage of the articular cartilage hypotheses regarding the mechanism of cartilage degradation and its association with the beak ligament. Since, flexion, extension (Fig. 2E-H). Figure 2. 3D rendering of the hand of one subject and the mechanical jigs

Laidlaw, David

425

E-Print Network 3.0 - acute neuropathic joint Sample Search Results  

NLE Websites -- All DOE Office Websites (Extended Search)

in differential diagnosis Summary: Proximal arms weak Dystrophy: Scapuloperoneal; FSH BCIM; Absent muscles; Shoulder joint MG; Neuropathic... ; Doxorubicin Colchicine;...

426

Time-lapse Joint Inversion of Geophysical Data and its Applications...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Objectives of the project * Forward modeling geophysical response with fluid flowheat modeling * Joint inversion (stochasticdeterministic) for ground water flow imaging *...

427

Smart Lighting: LED Implementation and Ambient Communication Applications  

E-Print Network (OSTI)

Smart Lighting: LED Implementation and Ambient Communication Applications by Nicholas Adrian Galano............................................................................................................................................1 LED Implementation..........................................................................................................................2 LED Energy Usage

Agogino, Alice M.

428

Implementation Report: Energy Conservation Standards Activities  

NLE Websites -- All DOE Office Websites (Extended Search)

Implementation Report: Implementation Report: Energy Conservation Standards Activities Submitted Pursuant to: Section 141 of the Energy Policy Act of 2005 & Section 305 of the Energy Independence and Security Act of 2007 U.S. Department of Energy August 2009 U.S. Department of Energy 2 Table of Contents List of Acronyms ...................................................................................................................................... 3 Introduction .............................................................................................................................................. 4

429

Implementation Report: Energy Conservation Standards Activities  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Implementation Report: Implementation Report: Energy Conservation Standards Activities Submitted Pursuant to: Section 141 of the Energy Policy Act of 2005 & Section 305 of the Energy Independence and Security Act of 2007 U.S. Department of Energy August 2009 U.S. Department of Energy 2 Table of Contents List of Acronyms ...................................................................................................................................... 3 Introduction .............................................................................................................................................. 4

430

Extending and implementing RASP Stefania Costantini  

E-Print Network (OSTI)

Extending and implementing RASP Stefania Costantini Universit`a di L'Aquila Stefania Programming), called RASP, standing for ASP with Resources. RASP supports declarative reasoning on production. Finally, we report on raspberry, a prototypical implementation of RASP. This tool consists of a compiler

Formisano, Andrea

431

Object Oriented Artificial Neural Network Implementations  

E-Print Network (OSTI)

1 Object Oriented Artificial Neural Network Implementations W. Curt Lefebvre Jose C. Principe Neuro artificial neural networks (ANNs). The conven- tion for ANN simulation has been a direct implementation to develop a graphical artificial neural network simulation environment motivated towards the pro- cessing

Slatton, Clint

432

UCSD Implementing Procedures 36/Classification of Positions  

E-Print Network (OSTI)

UCSD Implementing Procedures (HR-S-1) 36/Classification of Positions I. REFERENCES AND RELATED POLICIES A. UCSD Implementing Procedures 20 ­ Recruitment B. UC PPSM 36 - Classification of Positions C shall be obtained prior to any commitment to the concerned individual. III. PROCEDURES A. New

Tsien, Roger Y.

433

10 CFR 851 Implementation Work Group Charter  

Energy.gov (U.S. Department of Energy (DOE))

The 10 C.F.R. 851 Work Group is intended to promote excellence in the implementation of 10 C.F.R. 851, “Worker Safety and Health” and continuous improvement in the implementation of health and safety programs for the DOE contractor work force.

434

10 CFR 851 Implementation Work Group  

Energy.gov (U.S. Department of Energy (DOE))

The 10 C.F.R. 851 Work Group promotes excellence in the implementation of 10 C.F.R. 851, "Worker Safety and Health" and continuous improvement in the implementation of health and safety programs for the DOE contractor work force.

435

A Spatial Computing Architecture Implementing Computation Circuits  

E-Print Network (OSTI)

A Spatial Computing Architecture for Implementing Computation Circuits David Grant Supervisor: Dr Architecture Tools Preliminary Results Conclusions #12;3 Introduction Computational Circuits Software MB of memory ­ Add a few million gates ??? #12;5 Architecture and Tools to implement computational

Lemieux, Guy

436

Implementation Regulations MSc Chemical Engineering 2013-2014 THE IMPLEMENTATION REGULATIONS  

E-Print Network (OSTI)

.......................................................................................................4 Article 7 ­ The Nuclear Science & Engineering track. The programme comprises the following tracks: - Chemical Product Engineering, - Process Engineering, - NuclearImplementation Regulations MSc Chemical Engineering 2013-2014 THE IMPLEMENTATION REGULATIONS 2013

437

Leakage-flow-induced vibration of a tube-in-tube slip joint. [LMFBR  

SciTech Connect

The susceptibility of a cantilevered tube conveying water to self-excitation by leakage flow through a slip joint is assessed experimentally. The slip joint is formed by inserting a smaller, rigid tube into the free end of the cantilevered tube. Variations of the slip joint annular gaps and engagement lengths are tested, and several mechanisms for self-excitation are described.

Mulcahy, T.M.

1983-06-01T23:59:59.000Z

438

Topographic Variations in Biomechanical and Biochemical Properties in the Ankle Joint: An In Vitro Bovine Study  

E-Print Network (OSTI)

Topographic Variations in Biomechanical and Biochemical Properties in the Ankle Joint: An In Vitro the articulating surfaces of the ankle joint and to evaluate the functional and biological properties of engineered neo- cartilage generated using chondrocytes from different locations in the ankle joint. Methods

Athanasiou, Kyriacos

439

Assessment of a portable device for the quantitative measurement of ankle joint stiffness in spastic individuals  

E-Print Network (OSTI)

Assessment of a portable device for the quantitative measurement of ankle joint stiffness-rater reliability. The device could easily distinguish between stiff and control ankle joints. A portable device can be a useful diagnostic tool to obtain reliable information of stiffness for the ankle joint. a b

Gorassini, Monica

440

Computer-Assisted Ankle Joint Arthroplasty Using Bio-engineered Autografts  

E-Print Network (OSTI)

Computer-Assisted Ankle Joint Arthroplasty Using Bio-engineered Autografts R. Sidler1 , W. K study was conducted for the ankle joint, compris- ing a simplified rotational symmetric bone surface bioengineered autografts. The ankle joint was chosen as a first target J. Duncan and G. Gerig (Eds.): MICCAI

Note: This page contains sample records for the topic "joint implementation kyoto" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Joint ATLAS/CMS SLHC Opto WG 1 K.K. Gan Lesson Learned from  

E-Print Network (OSTI)

Joint ATLAS/CMS SLHC Opto WG 1 K.K. Gan Lesson Learned from ATLAS Pixel Optical Link #12;Joint ATLAS/CMS SLHC Opto WG 2 Outline Introduction VCSEL/PIN monitoring Analysis of opto-board/VCSEL/PIN failures Summary K.K. Gan #12;K.K. Gan Joint ATLAS/CMS SLHC Opto WG 3 Introduction Architecture

Gan, K. K.

442

Physical justification for using the tensor product to describe two quantum systems as one joint  

E-Print Network (OSTI)

Physical justification for using the tensor product to describe two quantum systems as one joint are classical the joint system is described by the cartesian product of the corresponding phase spaces, and if the systems are quantal the joint system is described by the tensor product of the corresponding Hilbert

Aerts, Diederik

443

SEMI-ALGEBRAIC CANONICAL DECOMPOSITION OF MULTI-WAY ARRAYS AND JOINT EIGENVALUE DECOMPOSITION  

E-Print Network (OSTI)

, Rennes, F-35000, France ABSTRACT A semi-algebraic algorithm based on Joint EigenValue De- composition, the "Closed Form Solution" (CFS) presented in [10] and [11] resorts to the Joint EigenValue DecompositionSEMI-ALGEBRAIC CANONICAL DECOMPOSITION OF MULTI-WAY ARRAYS AND JOINT EIGENVALUE DECOMPOSITION

Boyer, Edmond

444

Wind Program: Program Plans, Implementation, and Results  

NLE Websites -- All DOE Office Websites (Extended Search)

Wind Program Wind Program HOME ABOUT RESEARCH & DEVELOPMENT DEPLOYMENT FINANCIAL OPPORTUNITIES INFORMATION RESOURCES NEWS EVENTS EERE » Wind Program » About Key Activities Plans, Implementation, & Results Budget Contacts Plans, Implementation, and Results Here you'll find an overview of the Wind Program and links to its program planning, implementation, and results documents. This list summarizes the program's wind power research, development, and demonstration activities. Read more about: Overview Learn more about this EERE Office. Plans Discover the plans, budgets, and analyses that set the direction of office priorities and activities. Implementation Find out how the office controls, implements, and adjusts its plans and manages its activities. Results Learn about the technological, commercial, and other outputs and outcomes

445

Studying the implementation of public programs  

SciTech Connect

This report describes and critically assesses approaches that have been employed to study the implementation of public programs. Implementation is defined as the process by which new policies and/or practices are installed in organizations. The report was produced because of the increased interest among researchers and policy makers alike in the linkages between policy and outcome. The study of implementation has barely begun, and it was recognized that methodological issues of a particularly complex nature arise because of certain unique characteristics of the implementation processes: (1) they involve a series of decisions that occur over a long period of time, with no clear beginning or end points; (2) their outcomes have direct or indirect implications that are too complex for single-factor theories; (3) they involve a large number of participants; and (4) they involve situations that are rather unique in terms of agency context, historical moment in time, and other key elements. The approach employed in the report was to examine the methods that have been used in a number of exemplary studies of implementation. These studies are commonly cited in publications and informally in research circles. Descriptive material from each study was used to address three questions: (1) How is evidence collected in studies of implementation; (2) How is evidence analyzed; (3) What are the reasons for believing the conclusions from such studies. The report concludes with recomendations for the conduct of future studies of implementation.

Yin, R.K.

1980-02-01T23:59:59.000Z

446

European Commission Joint Research Centre | Open Energy Information  

Open Energy Info (EERE)

Research Centre Research Centre Jump to: navigation, search Logo: European Commission Joint Research Centre Name European Commission Joint Research Centre Address 1049 Brussels Place Brussels, Belgium Year founded 1957 Website http://ec.europa.eu/dgs/jrc/in Coordinates 50.8509279°, 4.3601162° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":50.8509279,"lon":4.3601162,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

447

DOE Joint Genome Institute Completes Soybean Genome- Data Released to  

NLE Websites -- All DOE Office Websites (Extended Search)

Press Release: December 8, 2008 Press Release: December 8, 2008 DOE Joint Genome Institute Completes Soybean Genome- Data Released to Advance Biofuel, Food, & Feed Research WALNUT CREEK, CA- The U.S. Department of Energy Joint Genome Institute (DOE JGI) has released a complete draft assembly of the soybean (Glycine max) genetic code, making it widely available to the research community to advance new breeding strategies for one of the world's most valuable plant commodities. Soybean not only accounts for 70 percent of the world's edible protein, but also is an emerging feedstock for biodiesel production. Soybean is second only to corn as an agricultural commodity and is the leading U.S. agricultural export. DOE JGI's interest in sequencing the soybean centers on its use for biodiesel, a renewable, alternative fuel with the highest energy content of

448

American Physical Society and Los Alamos National Laboratory jointly  

NLE Websites -- All DOE Office Websites (Extended Search)

Ben-Naim Senior editor, physical review e Ben-Naim Senior editor, physical review e American Physical Society and Los Alamos National Laboratory jointly announce Eli Ben-Naim as senior editor, physical review e Ben-Naim has been at Los Alamos since 1996. August 16, 2012 Eli Ben-Naim Eli Ben-Naim Contact Nancy Ambrosiano Communications Office (505) 667-0471 Email RIDGE, NY and LOS ALAMOS, New Mexico, August 16, 2012-The American Physical Society (APS) and Los Alamos National Laboratory (LANL) are pleased to jointly announce that Eli Ben-Naim of LANL has been appointed Senior Editor of Physical Review E, the position of leadership for the preeminent international journal in statistical, nonlinear, and soft matter physics. Ben-Naim succeeds Gary Grest, who has been Senior Editor of PRE since 2002. "The search committee was challenged to determine a short list

449

DOE Joint Genome Institute: Biofuel-Producing Bacteria, Insect Gut  

NLE Websites -- All DOE Office Websites (Extended Search)

June 29, 2009 June 29, 2009 Biofuel-Producing Bacteria, Insect Gut Microbes, ~ 70 other Projects Fill DOE Joint Genome Institute 2010 Pipeline WALNUT CREEK, CA-The U.S. Department of Energy (DOE) Joint Genome Institute (JGI) has selected 71 new genomic sequencing projects for its 2010 Community Sequencing Program (CSP)-a targeted sampling of the planet's biodiversity-to be characterized for bioenergy, climate, and environmental applications. JGI's Community Sequencing Program is the largest genomic sequencing effort in the world focused on nonmedical organisms, enabling scientists from universities and national laboratories to probe the hidden world of microbes and plants to tap nature's ingenuity for innovative solutions to the nation's major challenges in energy, climate, and environment. The

450

Transcript of March 4, 2011 Joint Public Meeting  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Transcript of Proceedings Transcript of Proceedings NUCLEAR REGULATORY COMMISSION Title: Disposal of Low-Level Nuclear Waste Joint NRC/DOE Workshop Docket Number: (n/a) Location: Phoenix, Arizona Date: Friday, March 4, 2011 Work Order No.: NRC-753 Pages 1-267 NEAL R. GROSS AND CO., INC. Court Reporters and Transcribers 1323 Rhode Island Avenue, N.W. Washington, D.C. 20005 (202) 234-4433 NEAL R. GROSS COURT REPORTERS AND TRANSCRIBERS 1323 RHODE ISLAND AVE., N.W. (202) 234-4433 WASHINGTON, D.C. 20005-3701 www.nealrgross.com 1 JOINT DOE/NRC WORKSHOP ON 1 DISPOSAL OF LOW-LEVEL RADIOACTIVE WASTE 2 + + + + + 3 Hyatt Regency Phoenix 4 122 North Second Street 5 Regency A Ballroom, First Floor 6 Phoenix, Arizona 85004 7

451

United States -Japan Joint Nuclear Energy Action Plan  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

-Japan Joint Nuclear Energy Action Plan -Japan Joint Nuclear Energy Action Plan 1. Introduction 1.1 Background and Objective President Bush of the U n i t e d States and Prime Minister Koizumi of Japan have both stated their strong support for the contribution of nuclear power to energy security and the global environment. Japan w a s the first nation to endorse President Bush's Global Nuclear Energy Partnership. During the June 29,2006 meeting between President Bush and Prime Minister Koizumi, "We discussed research and development that will help speed up fnt breeder reactors and new types of reprocessing so that we cmt help deal with the cost of globalization when it comes to energy; make ourselves more secure, economicallyI a s well n make us less dependent on hycirocmbons ..... " (I)

452

Sintered silver joints via controlled topography of electronic packaging subcomponents  

SciTech Connect

Disclosed are sintered silver bonded electronic package subcomponents and methods for making the same. Embodiments of the sintered silver bonded EPSs include topography modification of one or more metal surfaces of semiconductor devices bonded together by the sintered silver joint. The sintered silver bonded EPSs include a first semiconductor device having a first metal surface, the first metal surface having a modified topography that has been chemically etched, grit blasted, uniaxial ground and/or grid sliced connected to a second semiconductor device which may also include a first metal surface with a modified topography, a silver plating layer on the first metal surface of the first semiconductor device and a silver plating layer on the first metal surface of the second semiconductor device and a sintered silver joint between the silver plating layers of the first and second semiconductor devices which bonds the first semiconductor device to the second semiconductor device.

Wereszczak, Andrew A.

2014-09-02T23:59:59.000Z

453

Corrosion Issues in Solder Joint Design and Service  

SciTech Connect

Corrosion is an important consideration in the design of a solder joint. It must be addressed with respect to the service environment or, as in the case of soldered conduit, as the nature of the medium being transported within piping or tubing. Galvanic-assisted corrosion is of particular concern, given the fact that solder joints are comprised of different metals or alloy compositions that are in contact with one-another. The (thermodynamic) potential for corrosion to take place in a particular environment requires the availability of the galvanic series for those conditions and which includes the metals or alloys in question. However, the corrosion kinetics, which actually determine the rate of material loss under the specified service conditions, are only available through laboratory evaluations or field data that are found in the existing literature or must be obtained by in-house testing.

VIANCO,PAUL T.

1999-11-24T23:59:59.000Z

454

Probabilistic fracture toughness of welded joint for offshore structures  

SciTech Connect

The paper investigated the probabilistic properties for fracture toughness of offshore steel welded joint at 26 C, 0 C, {minus}20 C, {minus}40 C and {minus}60 C by experiment. On the basis of experimental data, it can be proved by statistical method that probabilistic critical CTOD (Crack Tip Opening Displacement) of A131 steel welded joint under different temperatures can be represented approximately by Weibull distribution, and their distribution parameters are also obtained. The P-T-{delta}{sub C} curve is established, which is used to describe the relationship among three parameters: CTOD, temperature and probability. These results are very useful for fracture reliability analysis and defect assessment of offshore structures.

Chen Guoming; Xu Fayan; Fang Huacan [Univ. of Petroleum, Shandong, Dongying (China); Yang Xiaogang [China Offshore Oil Engineering Design Corp., Tianjin (China)

1996-12-01T23:59:59.000Z

455

Stiffness and strength of suture joints in nature  

Science Journals Connector (OSTI)

Suture joints are remarkable mechanical structures found throughout nature composed of compliant interlocking seams connecting stiffer components. This study investigates the underlying mechanisms and the role of geometry governing the unique mechanical behavior of suture joints. Analytical and numerical composite models are formulated for two suture geometries characterized by a single repeating wavelength (e.g., triangular and rectangular). Stiffness, strength, and local stress distributions are predicted to assess variations in deformation and failure mechanisms. A unique homogeneous stress field is observed throughout both the skeletal and interfacial components of the triangular geometry, thus providing advantages in load transmission, weight, stiffness, strength, energy absorption, and fatigue over the rectangular geometry. The results obtained have relevance to biomimetic design and optimization, suture growth and fusion, and evolutionary phenotype diversity.

Yaning Li; Christine Ortiz; Mary C. Boyce

2011-12-29T23:59:59.000Z

456

Antidegredation Implementation Methods (Mississippi) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Antidegredation Implementation Methods (Mississippi) Antidegredation Implementation Methods (Mississippi) Antidegredation Implementation Methods (Mississippi) < Back Eligibility Agricultural Commercial Construction Developer Fed. Government Fuel Distributor General Public/Consumer Industrial Installer/Contractor Institutional Investor-Owned Utility Local Government Low-Income Residential Multi-Family Residential Municipal/Public Utility Nonprofit Residential Retail Supplier Rural Electric Cooperative Schools State/Provincial Govt Systems Integrator Transportation Tribal Government Utility Savings Category Alternative Fuel Vehicles Hydrogen & Fuel Cells Buying & Making Electricity Water Home Weatherization Solar Wind Program Info State Mississippi Program Type Environmental Regulations Siting and Permitting Provider Mississippi Department of Environmental Quality

457

Initial Joint Review of Wildland Fire Safety at DOE Sites  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

December December 2000 A Report to the Secretary of Energy Initial Joint Review of Wildland Fire Safety at DOE Sites OVERSIGHT Table of Contents Executive Summary................................................................................... 1 1.0 Introduction ......................................................................................... 5 2.0 Summary of Review Results .............................................................. 8 2.1 Wildland Fire Management Policy ............................................. 8 2.2 Fire/Emergency Hazards Assessments ....................................... 9 2.3 Wildland Fire Prevention and Response .................................. 11 2.4 Offsite Interfaces and Agreements ........................................... 13 2.5 Feedback and Continuous Improvement

458

Innovative New Industrial Technologies: An Industry/DOE Joint Endeavor  

E-Print Network (OSTI)

rugged and less susceptible to joint leakage prob lems, corrosion, fouling and breakage. The waste heat recovery program includes work in advanced heat pumps utilizing chemical absorp tion systems, chemical heat of reaction sys tems and magnetic... for additional improved models for other plants. Two high temperature burner duct recuperators, with somewhat different designs, are being developed by Garrett and Babcock & Wilcox under cost-sharing contracts. The Garrett unit uses ceramic tubes with a...

Gross, T. J.

459

A new technique for ultrasonic nondestructive evaluation of adhesive joints  

E-Print Network (OSTI)

the need for nondestructive characterization (NDE) of adhesive layers within a joint. In aerospace adhesives, (typically thermoset resins), determination of wavespeed, and thus modulus, will indicate if resins have been properly cured. Without proper... and will affect bond strength. Therefore, there is a need for techniques for in-situ nondestructive evaluation (NDE) of these two parameters. Although ultrasonic NDE (UNDE) techniques appear to be the most promising techniques for determining the properties...

Hanneman, Susan Elisabeth

2012-06-07T23:59:59.000Z

460

Joint Outreach Task Group (JOTG) Events | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Information Center » Worker » Former Worker Program » Joint Information Center » Worker » Former Worker Program » Joint Outreach Task Group (JOTG) Events Joint Outreach Task Group (JOTG) Events Upcoming Events Local Event X-10/Y-12 - Oak Ridge, TN January 21, 2014 12:00PM to 1:00PM EST Local Event Y-12 - Oak Ridge, TN January 21, 2014 5:00PM to 6:00PM EST FWP Event Mound - Miamisburg, OH February 4, 2014 8:00AM to 10:00AM EST Local Event Y-12 - Oak Ridge, TN February 4, 2014 9:00AM to 10:00AM EST Local Event X-10 - Oak Ridge, TN February 5, 2014 7:15AM to 8:15AM EST Local Event Y-12 - Oak Ridge, TN February 5, 2014 9:00AM to 10:00AM EST Local Event Y-12 - Oak Ridge, TN February 5, 2014 11:00AM to 12:00PM EST FWP Event X-10/Y-12 - Oak Ridge, TN February 5, 2014 4:30PM to 5:30PM EST Local Event X-10/Y-12 - Oak Ridge, TN

Note: This page contains sample records for the topic "joint implementation kyoto" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Expansion joint for guideway for magnetic levitation transportation system  

DOE Patents (OSTI)

An expansion joint that allows a guideway of a magnetic levitation transportation system to expand and contract while minimizing transients occurring in the magnetic lift and drag forces acting on a magnetic levitation vehicle traveling over the joint includes an upper cut or recess extending downwardly from the upper surface of the guideway and a non-intersecting lower cut or recess that extends upwardly from the lower surface of the guideway. The side walls of the cuts can be parallel to each other and the vertical axis of the guideway; the depth of the lower cut can be greater than the depth of the upper cut; and the overall combined lengths of the cuts can be greater than the thickness of the guideway from the upper to lower surface so that the cuts will overlap, but be spaced apart from each other. The distance between the cuts can be determined on the basis of the force transients and the mechanical behavior of the guideway. A second pair of similarly configured upper and lower cuts may be disposed in the guideway; the expansion joint may consist of two upper cuts and one lower cut; or the cuts may have non-parallel, diverging side walls so that the cuts have a substantially dove-tail shape.

Rossing, T.D.

1993-02-09T23:59:59.000Z

462

Expansion joint for guideway for magnetic levitation transportation system  

DOE Patents (OSTI)

An expansion joint that allows a guideway of a magnetic levitation transportation system to expand and contract while minimizing transients occurring in the magnetic lift and drag forces acting on a magnetic levitation vehicle traveling over the joint includes an upper cut or recess extending downwardly from the upper surface of the guideway and a non-intersecting lower cut or recess that extends upwardly from the lower surface of the guideway. The sidewalls of the cuts can be parallel to each other and the vertical axis of the guideway; the depth of the lower cut can be greater than the depth of the upper cut; and the overall combined lengths of the cuts can be greater than the thickness of the guideway from the upper to lower surface so that the cuts will overlap, but be spaced apart from each other. The distance between the cuts can be determined on the basis of the force transients and the mechanical behavior of the guideway. A second pair of similarly configured upper and lower cuts may be disposed in the guideway; the expansion joint may consist of two upper cuts and one lower cut; or the cuts may have non-parallel, diverging sidewalls so that the cuts have a substantially dove-tail shape.

Rossing, Thomas D. (DeKalb, IL)

1993-01-01T23:59:59.000Z

463

Hoechst and Wacker plan joint venture in PVC  

SciTech Connect

Restructuring of Europe's petrochemical industry has taken a further step with the announcement that Hoechst (Frankfurt) and Wacker Chemie (Munich) are planning a joint venture in polyvinyl chloride (PVC). The venture would include production, R D, sales and marketing, plus both companies' PVC recycling activities. However, their vinyl chloride monomer (VCM) plants, and Hoechst's Kalle PVC film business, have been left out. Erich Schnitzler, head of Hoechst's PVC business unit, does not anticipate problems with the European Community's competition directorate. We are both among the middle-sized European PVC producers, and together we would have a 9%-10% market share. Our joint venture would not limit competition. Both partners are hoping for approval from Brussels in first-quarter 1993. Hoechst has 255,000 m.t./year of PVC capacity at Gendorfand Knapsack, while Wacker has 365,000 m.t./year at Burghausen and Cologne. All the units, except Wacker's Cologne plant, are back integrated to VCM. The joint venture would buy VCM from the two parent companies and on the merchant market.

Young, I.

1992-12-02T23:59:59.000Z

464

The joint DoD/DOE Munitions Technology Development Program  

SciTech Connect

The joint Department of Defense (DoD)/Department of Energy (DOE) Munitions Technology Development Program is a cooperative, jointly funded effort of research and development to improve nonnuclear munitions technology across all service mission areas. This program is enabled under a Memorandum of Understanding, approved in 1985 between the DoD and the DOE, that tasks the nuclear weapons laboratories of the DOE to solve problems in conventional defense. The selection of the technical areas to be investigated is based on their importance to the military services, the needs that are common to the conventional and nuclear weapons programs, the expertise of the performing organization, and the perceived benefit to the overall national defense efforts. The research benefits both DoD and DOE programs; therefore, funding, planning, and monitoring are joint activities. Technology Coordination Groups (TCGs), organized by topical areas, serve as technology liaisons between the DoD and DOE for the exchange of information. The members of the TCGs are technical experts who meet semiannually in an informal workshop format to coordinate multiagency requirements, establish project plans, monitor technical activity, and develop classification guidance. A technical advisory committee of senior DoD and DOE managers administers the program and provides guidance on policy and strategy. The abstracts in this volume were collected from the technical progress report for fiscal year 1993. The annual report is organized by major technology areas. Telephone and fax numbers for the principal contacts are provided with each abstract.

Repa, J.V. Jr.

1994-08-01T23:59:59.000Z

465

Second National Report for the Joint Convention on the Safety of Spent Fuel  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Second National Report for the Joint Convention on the Safety of Second National Report for the Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management Second National Report for the Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management This second National Report updates the first National Report published on May 3, 2003, under the terms of the Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management (Joint Convention). This report satisfies the requirements of the Joint Convention for reporting on the status of safety at spent fuel (SF) and radioactive waste management facilities within the United States of America (U.S.). Second National Report for the Joint Convention on the Safety of Spent Fuel

466

National Report Joint Convention on the Safety of Spent Fuel Management and  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

National Report Joint Convention on the Safety of Spent Fuel National Report Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management National Report Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management This is the first National Report prepared under the terms of the Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Managementi hereafter referred to as the "Joint Convention". This report satisfies the requirements of the Joint Convention for reporting on the status of safety at spent fuel and radioactive waste management facilities within the United States of America (U.S.). National Report Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management - May 2003

467

Initial Joint Review, Wildland Fire Safety at DOE Sites - December 2000 |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Initial Joint Review, Wildland Fire Safety at DOE Sites - December Initial Joint Review, Wildland Fire Safety at DOE Sites - December 2000 Initial Joint Review, Wildland Fire Safety at DOE Sites - December 2000 December 2000 Initial Joint Review of Wildland Fire Safety at DOE Sites The initial joint review was conducted between October 15 and December 15, 2000, by the Offices of Independent Oversight and Performance Assurance (OA), Security and Emergency Operations (SO), and Environment, Safety and Health (EH). The purpose of the initial joint review was to assess the abilities of DOE sites to prevent and respond to wildland fires and provide recommendations for pertinent site-specific and DOE-wide improvements. Initial Joint Review, Wildland Fire Safety at DOE Sites - December 2000 More Documents & Publications Audit Report: IG-0760

468

The Joint Efficient Dark-energy Investigation (JEDI): Measuring the cosmic expansion history from type Ia supernovae  

E-Print Network (OSTI)

JEDI (Joint Efficient Dark-energy Investigation) is a candidate implementation of the NASA-DOE Joint Dark Energy Mission (JDEM). JEDI will probe dark energy in three independent methods: (1) type Ia supernovae, (2) baryon acoustic oscillations, and (3) weak gravitational lensing. In an accompanying paper, an overall summary of the JEDI mission is given. In this paper, we present further details of the supernova component of JEDI. To derive model-independent constraints on dark energy, it is important to precisely measure the cosmic expansion history, H(z), in continuous redshift bins from z \\~ 0-2 (the redshift range in which dark energy is important). SNe Ia at z > 1 are not readily accessible from the ground because the bulk of their light has shifted into the near-infrared where the sky background is overwhelming; hence a space mission is required to probe dark energy using SNe. Because of its unique near-infrared wavelength coverage (0.8-4.2 microns), JEDI has the advantage of observing SNe Ia in the rest frame J band for the entire redshift range of 0 energy are discussed, with special emphasis on the improved precision afforded by the rest frame near-infrared data.

M. M. Phillips; Peter Garnavich; Yun Wang; David Branch; Edward Baron; Arlin Crotts; J. Craig Wheeler; Edward Cheng; Mario Hamuy; for the JEDI Team

2006-06-28T23:59:59.000Z

469

The joint statistics of mildly non-linear cosmological densities and slopes in count-in-cells  

E-Print Network (OSTI)

In the context of count-in-cells statistics, the joint probability distribution of the density in two concentric spherical shells is predicted from first first principle for sigmas of the order of one. The agreement with simulation is found to be excellent. This statistics allows us to deduce the conditional one dimensional probability distribution function of the slope within under dense (resp. overdense) regions, or of the density for positive or negative slopes. The former conditional distribution is likely to be more robust in constraining the cosmological parameters as the underlying dynamics is less evolved in such regions. A fiducial dark energy experiment is implemented on such counts derived from Lambda-CDM simulations.

Bernardeau, Francis; Pichon, Christophe

2015-01-01T23:59:59.000Z

470

Design space exploration for low-power channel decoder in embedded LDPC-H.264 joint decoding architecture  

Science Journals Connector (OSTI)

This paper presents a low-power design scheme to lower baseband energy consumption using joint source decoding and dynamic voltage and frequency scaling (DVFS). This scheme combines unequal error protection (UEP) developed for error resilient video coding with a variable iteration low density parity check (LDPC) decoder to trade off performance against energy consumption. Using the proposed method, we determine LDPC decoding configurations that achieve minimum energy consumption while satisfying prespecified image quality at the receiver. The implementation results yield 17%, 37%, 52% power reductions with 0, 0.3, 1.1 dB peak signal to noise ratio (PSNR) degradation at 3.6 dB SNR in Foreman test stream respectively.

Yoon Seok Yang; Gwan Choi

2011-01-01T23:59:59.000Z

471

SEALING LARGE-DIAMETER CAST-IRON PIPE JOINTS UNDER LIVE CONDITIONS  

SciTech Connect

Utilities in the U.S. operate over 75,000 km (47,000 miles) of old cast-iron pipes for gas distribution. The bell-and-spigot joints that connect pipe sections together tend to leak as these pipes age. Current repair practices are costly and highly disruptive. The objective of this program is to design, test and commercialize a robotic system capable of sealing multiple castiron bell and spigot joints from a single pipe entry point. The proposed system will perform repairs while the pipe remains in service by traveling through the pipe, cleaning each joint surface, and installing a stainless-steel sleeve lined with an epoxy-impregnated felt across the joint. This approach will save considerable time and labor, avoid traffic disruption, and eliminate any requirement to interrupt service to customers (which would result in enormous expense to utilities). Technical challenges include: (1) repair sleeves must compensate for diametric variation and eccentricity of cast-iron pipes; (2) the assembly must travel long distances through pipes containing debris; (3) the pipe wall must be effectively cleaned in the immediate area of the joint to assure good bonding of the sleeve; and (4) an innovative bolt-on entry fitting is required to conduct repair operations on live mains. The development effort is divided into eleven tasks. Task 1 (Program Management) and Task 2 (Establishment of Detailed Design Specifications) were completed in prior quarters while Task 3 (Design and Fabricate Ratcheting Stainless-Steel Repair Sleeves) has progressed to installing prototype sleeves in cast iron test pipe segments. Efforts in this quarter continued to focus on Tasks 4-8, with significant progress made in each as well as field testing of the 4-inch gas pipe repair robot in cast iron pipe at Public Service Electric & Gas. The field tests were conducted August 23-26, 2004 in Oradell, New Jersey. The field tests identified several design issues which need to be implemented in both the small- and large-diameter cast iron repair robots to assure their commercial success. Task 4 (Design, Fabricate and Test Patch Setting Robotic Train) progressed to the design of the control electronics and pneumatic system to inflate the bladder robotic patch setting module in the last quarter 5. In this quarter, work has been concentrated on increasing the nitrogen bladder reservoir volume to allow at least two complete patch inflation/patch setting cycles in the event the sleeve does not set all ratchets in the same row on the first attempt. This problem was observed on a few of the repair sleeves that were recently installed during field tests with the small-diameter robotic system. For Task 5 (Design & Fabricate Pipe-Wall Cleaning Robot Train with Pan/Zoom/Tilt Camera) it was observed that it will be necessary to add a stiff brush to push debris away from the immediate vicinity of the bell and spigot joints in mains having low gas velocities. Otherwise, material removed by the cleaning flails (which were found to be very effective in cleaning bell and spigot joints) simply falls to the low side of the pipe and accumulates in a pile. This accumulation can prevent the sleeve from achieving a leak free repair. Similarly, it is also necessary to design a small magnet to capture existing service tap coupons and allow their removal from the inside of the pipe. These coupons were found to cause difficulty in launching and retrieving the small pipe repair robot; one coupon lodged beneath the end of the guide shoe. These new features require redesign of the pipe wall cleaning train and modification to the patch setting train. Task 6 (Design & Build Surface Control and Monitoring System) was previously completed with the control and computer display functions being operated through LabView. However, this must now be re-visited to add control routines for the coupon catcher to be added. This will most likely include a lift-off/place-on magnet translation function. Task 7 (Design & Fabricate Large Diameter Live Access System) progressed to completing the detailed design of th

Kiran M. Kothari; Gerard T. Pittard

2004-11-01T23:59:59.000Z

472

SEALING LARGE-DIAMETER CAST-IRON PIPE JOINTS UNDER LIVE CONDITIONS  

SciTech Connect

Utilities in the U.S. operate over 75,000 km (47,000 miles) of old cast-iron pipes for gas distribution. The bell-and-spigot joints that connect pipe sections together tend to leak as these pipes age. Current repair practices are costly and highly disruptive. The objective of this program is to design, test and commercialize a robotic system capable of sealing multiple cast-iron bell and spigot joints from a single pipe entry point. The proposed system will perform repairs while the pipe remains in service by traveling through the pipe, cleaning each joint surface, and installing a stainless-steel sleeve lined with an epoxy-impregnated felt across the joint. This approach will save considerable time and labor, avoid traffic disruption, and eliminate any requirement to interrupt service to customers (which would result in enormous expense to utilities). Technical challenges include: (1) repair sleeves must compensate for diametric variation and eccentricity of old cast-iron pipes; (2) the assembly must travel long distances through pipes containing debris; (3) the pipe wall must be effectively cleaned in the immediate area of the joint to assure good bonding of the sleeve; and (4) an innovative bolt-on entry fitting is required to conduct repair operations on live mains. The development effort is divided into eleven tasks. Task 1 (Program Management) and Task 2 (Establishment of Detailed Design Specifications) were completed previously. Task 3 (Design and Fabricate Ratcheting Stainless-Steel Repair Sleeves) has progressed to installing prototype sleeves in test cast-iron pipe segments. Efforts in the current quarter continued to be focused on Tasks 4-8. Highly valuable lessons were learned from field tests of the 4-inch gas pipe repair robot in cast-iron pipe at Public Service Electric & Gas. (These field tests were conducted and reported previously.) Several design issues were identified which need to be implemented in both the small- and large-diameter repair robots for cast-iron pipe to assure their commercial success. For Task 4 (Design, Fabricate and Test Patch Setting Robotic Train), previous problems with bladder design and elastomeric material expansion in the large mains were addressed. A new bladder based on a commercially available design was obtained and tested with success. Minor improvements were highlighted during patch-setting tests and are now being pursued. For Task 5 (Design and Fabricate Pipe-Wall Cleaning Robot Train with Pan/Zoom/Tilt Camera), the previous field tests showed clearly that, in mains with low gas velocities, it will be necessary to improve the system's capacity to remove debris from the immediate vicinity of the bell and spigot joints. Otherwise, material removed by the cleaning flails (the flails were found to be very effective in cleaning bell and spigot joints) falls directly to the low side of the pipe and accumulates in a pile. This accumulation can prevent the sleeve from achieving a leak-free repair. Similarly, it is also deemed necessary to design an assembly to capture existing servicetap coupons and allow their removal from the inside of the pipe. Task 6 (Design and Build Surface Control and Monitoring System) was previously completed with the control and computer display functions being operated through LabVIEW. However, this must now be revisited to add control routines for the coupon catcher that will be added. This will most likely include a lift-off/place-on magnet translation function. Task 7 (Design and Fabricate Large Diameter Live Access System) progressed to completing the detailed design for a bolt-on entry fitting for 12-inch diameter cast-iron pipe in the current quarter. The drilling assembly for cutting an access hole through the wall of the gas main was also designed, along with a plug assembly to allow removing all tools from the live main and setting a blind flange on the entry fitting prior to burial. These designs are described in detail in the report. Task 8 (System Integration and Laboratory Validation) continued with the development of the robot module i

Kiran M. Kothari; Gerard T. Pittard

2005-04-01T23:59:59.000Z

473

SEALING LARGE-DIAMETER CAST-IRON PIPE JOINTS UNDER LIVE CONDITIONS  

SciTech Connect

Utilities in the U.S. operate over 75,000 km (47,000 miles) of old cast-iron pipes for gas distribution. The bell-and-spigot joints that connect pipe sections together tend to leak as these pipes age. Current repair practices are costly and highly disruptive. The objective of this program is to design, test and commercialize a robotic system capable of sealing multiple cast-iron bell and spigot joints from a single pipe entry point. The proposed system will perform repairs while the pipe remains in service by traveling through the pipe, cleaning each joint surface, and installing a stainless-steel sleeve lined with an epoxy-impregnated felt across the joint. This approach will save considerable time and labor, avoid traffic disruption, and eliminate any requirement to interrupt service to customers (which would result in enormous expense to utilities). Technical challenges include: (1) repair sleeves must compensate for diametric variation and eccentricity of cast-iron pipes; (2) the assembly must travel long distances through pipes containing debris; (3) the pipe wall must be effectively cleaned in the immediate area of the joint to assure good bonding of the sleeve; and (4) an innovative bolt-on entry fitting is required to conduct repair operations on live mains. The development effort is divided into eleven tasks. Task 1 (Program Management) and Task 2 (Establishment of Detailed Design Specifications) were completed in prior quarters while Task 3 (Design and Fabricate Ratcheting Stainless-Steel Repair Sleeves) has progressed to installing prototype sleeves in cast-iron test pipe segments. Efforts in the current quarter continued to focus on Tasks 4-8. Highly valuable lessons were learned from field tests of the 4-inch gas pipe repair robot in cast-iron pipe at Public Service Electric & Gas. (These field tests were conducted and reported last quarter.) These tests identified several design issues which need to be implemented in both the small- and large-diameter repair robots for cast-iron pipe to assure their commercial success. For Task 4 (Design, Fabricate and Test Patch Setting Robotic Train), work has been directed on increasing the nitrogen bladder reservoir volume to allow at least two complete patch inflation/patch setting cycles in the event the sleeve does not set all ratchets in the same row on the first attempt. This problem was observed on a few of the repair sleeves that were recently installed during field tests with the small-diameter robotic system. For Task 5 (Design & Fabricate Pipe-Wall Cleaning Robot Train with Pan/Zoom/Tilt Camera), the recent field tests showed clearly that, in mains with low gas velocities, it will be necessary to improve the system's capacity to remove debris from the immediate vicinity of the bell and spigot joints. Otherwise, material removed by the cleaning flails (the flails were found to be very effective in cleaning bell and spigot joints) falls directly to the low side of the pipe and accumulates in a pile. This accumulation can prevent the sleeve from achieving a leak-free repair. Similarly, it is also deemed necessary to design an assembly to capture existing service-tap coupons and allow their removal from the inside of the pipe. These coupons were found to cause difficulty in launching and retrieving the small pipe repair robot; for example, one coupon lodged beneath the end of the guide shoe. Designs for new features to accomplish these goals for the large robotic system were pursued and are presented in this report. Task 6 (Design & Build Surface Control and Monitoring System) was previously completed with the control and computer display functions being operated through LabVIEW. However, this must now be revisited to add control routines for the coupon catcher to be added. This will most likely include a lift-off/place-on magnet translation function. Task 7 (Design & Fabricate Large Diameter Live Access System) progressed to completing the detailed design of the entry fitting for 12-inch diameter cast iron pipe in the previous quarter. Field tests with the 4-inch

Kiran M. Kothari; Gerard T. Pittard

2005-01-01T23:59:59.000Z

474

Plans, Implementation and Results | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Plans, Implementation and Results Plans, Implementation and Results Plans, Implementation and Results The Office of Energy Efficiency and Renewable Energy (EERE) works to strengthen the United States' energy security, environmental quality, and economic vitality in public-private partnerships. It supports this goal through (1) enhancing energy efficiency and productivity; and (2) bringing clean, reliable and affordable energy technologies to the marketplace. This area of the EERE website provides direct links to hundreds of pages and documents that collectively demonstrate and explain: How EERE and its programs make their plans How they implement, control and adjust these plans, and The technological, commercial and other outputs and outcomes that result from the public funds appropriated to the Office and its programs

475

Implementation, Certification and Enforcement | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Implementation, Certification Implementation, Certification and Enforcement Implementation, Certification and Enforcement The U.S. Department of Energy (DOE) is authorized by the Energy Policy and Conservation Act of 1975 (as amended) to enforce compliance with the energy and water conservation standards established for certain consumer products and commercial and industrial equipment. To ensure the implementation of the current standards for covered appliances and equipment, DOE has published certification, compliance, and enforcement regulations for these products and equipment in the Code of Federal Regulations (CFR) at 10 CFR part 429. Please note that the previous link is to the Electronic Code of Federal Regulations (e-CFR), which is a version of the CFR updated daily. It is not an official legal edition of

476

Plans, Implementation, and Results | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

About the Program » Plans, Implementation, and Results About the Program » Plans, Implementation, and Results Plans, Implementation, and Results October 8, 2013 - 1:23pm Addthis The U.S. Department of Energy's Federal Energy Management Program (FEMP) works with key individuals to accomplish energy change within organizations by bringing expertise from all levels of project and policy implementation to enable Federal agencies to meet energy-related goals and provide energy leadership to the country. This Web page includes links to documents that support the office management process and the results and public benefits that derive from it. Overview Learn more about this EERE office. Key Office Documents FEMP Overview Legislative and Executive Guidance FEMP Laws and Regulations Structure and Key Contacts FEMP Contacts

477

Yellow: Pre-DOE Implementation Plan  

NLE Websites -- All DOE Office Websites (Extended Search)

Yellow: Pre-DOE Implementation Plan 192012 Page 1 of 3 Waste Treatment Plant (WTP) Safety Culture Background: A chain of events involving the design and construction of the...

478

Graph Implementations for Nonsmooth Convex Programs  

E-Print Network (OSTI)

Summary. We describe graph implementations, a generic method for represent- ... object-oriented features of Matlab to turn it into an optimization modeling language: ..... For matrix and array expressions, these rules are applied on an elemen-.

2007-09-07T23:59:59.000Z

479

Phosphorylation based insulation devices design and implementation  

E-Print Network (OSTI)

This thesis presents the analysis of a phosphorylation based insulation device implemented in Saccharomyces cerevisae and the minimization of the retroactivity to the input and retroactivity to the output of a single cycle ...

Rivera Ortiz, Phillip M. (Phillip Michael)

2013-01-01T23:59:59.000Z

480

Parabolic cylinder functions implemented in Matlab  

E-Print Network (OSTI)

Routines for computation of Weber's parabolic cylinder functions and their derivatives are implemented in Matlab for both moderate and great values of the argument. Standard, real solutions are considered. Tables of values are included.

E. Cojocaru

2009-01-15T23:59:59.000Z

Note: This page contains sample records for the topic "joint implementation kyoto" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

California Nonpoint Source Program Strategy and Implementation...  

Open Energy Info (EERE)

California Nonpoint Source Program Strategy and Implementation Plan, 1998-2013 Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther:...

482

Oracle accrual plans from requirements to implementation  

SciTech Connect

Implementing any new business software can be an intimidating prospect and this paper is intended to offer some insight in to how to approach this challenge with some fundamental rules for success. Los Alamos National Laboratory (LANL) had undergone an original ERP implementation of HRMS, Oracle Advanced Benefits, Worker Self Service, Manager Self Service, Project Accounting, Financials and PO, and recently completed a project to implement Oracle Payroll, Time and Labor and Accrual Plans. This paper will describe some of the important lessons that can be applied to any implementation as a whole, and then specifically how this knowledge was applied to the design and deployment of Oracle Accrual Plans for LANL. Finally, detail on the functionality available in Oracle Accrual Plans will be described, as well as the detailed setups.that were utilized at LANL.

Rivera, Christine K [Los Alamos National Laboratory

2009-01-01T23:59:59.000Z

483

Indoor robot gardening: design and implementation  

E-Print Network (OSTI)

This paper describes the architecture and implementation of a distributed autonomous gardening system with applications in urban/indoor precision agriculture. The garden is a mesh network of robots and plants. The gardening ...

Correll, Nikolaus

484

Design and implementation of the DDA network  

E-Print Network (OSTI)

Udo W. Pooch (Member) Pierre J. Catala (Member) Ric ard A. Volz (Head of Department) December 1996 Major Subject: Computer Science ABSTRACT Design and Implementation of the DDA Network. (December 1996) Wenhu Lu, B. S. , Fudan University; M...

Lu, Wenhu

1996-01-01T23:59:59.000Z

485

2005 Adjudicative Guidelines Implementation | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

05 Adjudicative Guidelines Implementation 05 Adjudicative Guidelines Implementation 2005 Adjudicative Guidelines Implementation On December 29,2005, the President approved a revision of the Adjudicative Guidelines for Determining Eligibility for Access to Classified Information. The revised guidelines were distributed as an attachment to a memorandum from Stephen J. Hadley, Assistant to the President for National Security Affairs, addressed to William Leonard, Director of the Information Security Oversight Office. In his memorandum, Mr. Hadley instructed Mr. Leonard to circulate the revised guidelines for immediate implementation by all agencies that grant security clearances. Mr. Hadley further emphasized that all agencies must honor clearances granted under the new guidelines, consistent with Executive Order (E.O.) 12968 and the December 12,2005,

486

Criticality Safety Controls Implementation Inspection Criteria, Approach,  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Criticality Safety Controls Implementation Inspection Criteria, Criticality Safety Controls Implementation Inspection Criteria, Approach, and Lines of Inquiry, October 23, 2009, (HSS CRAD 64-18, Rev 0 ) Criticality Safety Controls Implementation Inspection Criteria, Approach, and Lines of Inquiry, October 23, 2009, (HSS CRAD 64-18, Rev 0 ) DOE has set expectations for implementing criticality safety controls that are selected to provide preventive and/or mitigative functions for specific potential accident scenarios. There are additional expectations for criticality safety controls that are also designated as Specific Administrative Controls (SACs) (see HSS CRAD 64-32). Also, in instances when the review addresses functionality and operability of structures, systems, and components (SSCs) of nuclear facilities specifically required

487

Special Features: Kyoto University's International Relations Endeavors  

E-Print Network (OSTI)

researchers, but to actively engage with the international community, concentrating on the strategy's three central pillars of research, education, and international service. This issue of Research Activities University is to sustain and develop its historical commitment to academic freedom and to pursue harmonious

Takada, Shoji

488

26AUTUMN 2014 Kyoto University Newsletter  

E-Print Network (OSTI)

International Offices: The European Center in Heidelberg and the ASEAN Center in Bangkok World-renowned KU

Takada, Shoji

489

Climate policy: The Kyoto approach has failed  

Science Journals Connector (OSTI)

... capital invested in it, numerous subsequent Conference of the Parties (COP) meetings and considerable economic costs, it has had no noticeable impact on global carbon emissions. These remain on ... India will be twice their present size, requiring the addition of 400–600 gigawatts of coal-fired generating capacity to their electricity systems. ...

Dieter Helm

2012-11-28T23:59:59.000Z

490

JournalJoint Oceanographic Institutions for Deep Earth SamplingJoint Oceanographic Institutions for Deep Earth Sampling Vol. 25 No. 1-1999  

E-Print Network (OSTI)

JOIDES JournalJoint Oceanographic Institutions for Deep Earth SamplingJoint Oceanographic Institutions for Deep Earth Sampling Vol. 25 No. 1-1999 Continental Rifting, Low-angle Normal Faulting and Deep Data to the World Wide Web The Ocean Drilling Stratigraphic Network #12;The JOIDES office moved

491

Implementation Implementation  

E-Print Network (OSTI)

. Increase of the power and number of processors of supercomputers Site Computer kProc Tflops DOE(US) SGI 14 126 Computational Res. Lab.(India) EKA Cluster Xeon 14 117 Government Agency (Sweden) Cluster with the LOBPCG method 1 Theoretical background The Norm-Conserving method (NC) The Projector Augmented-Wave

Knyazev, Andrew

492

Implementing Arrangement Between the U.S. Department of Energy and the  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Initiative Initiative Implementing Arrangement Between the U.S. Department of Energy and the Agency of Natural Resources and Energy of Japan Concerning Cooperation in the Joint Nuclear Energy Research Initiative Sharing an interest in fostering advanced nuclear engineering and pursuing scientific research and development in the nuclear field; Seeking to promote and maintain nuclear science and engineering infrastructure in the Parties' respective countries to sustain the capabilities necessary for the development and use of nuclear energy; Believing that cooperation based on equitable sharing of their respective research and development data, technology and experience in the nuclear energy field would be of mutual benefit. 4.5.1.1.3.5_japan_agreement.pdf More Documents & Publications

493

An SME's Perspective on Implementing the Superior Energy Performance Program  

E-Print Network (OSTI)

system assessment standards and is implementing a Management System for Energy that meets the MSE 20000:2008 standard. Pierre will describe the results of the assessments, project implementation and management system implementation....

Waz, P.

494

Implementing Agreement - U.S.-UK Collaboration in Fossil Energy...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Implementing Agreement - U.S.-UK Collaboration in Fossil Energy R&D Implementing Agreement - U.S.-UK Collaboration in Fossil Energy R&D Implementing Agreement - U.S.-UK...

495

Joint Actinide Shock Physics Experimental Research | National Nuclear  

National Nuclear Security Administration (NNSA)

Actinide Shock Physics Experimental Research | National Nuclear Actinide Shock Physics Experimental Research | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Jasper Joint Actinide Shock Physics Experimental Research Home > About Us > Our Programs > Defense Programs > Office of Research, Development, Test, and Evaluation > Office of Research and Development >

496

Stress intensity factors for small fatigue cracks in tubular joints  

SciTech Connect

Some simple fracture mechanics models are presented for estimating stress intensity factors for small surface fatigue cracks in welded tubular joints. Model predictions are compared with large-scale experimental results for the cases of in-plane and out-of-plane bending in multi-brace tubular nodes. It is demonstrated that reasonably accurate predictions of the stress intensity factor are possible using a modified flat plate solution if the effects of weld geometry, load shedding and crack shape are adequately accounted for.

Monahan, C.C. [Memorial Univ. of Newfoundland, St. Johns, Newfoundland (Canada). Centre for Cold Ocean Resources Engineering; Dover, W.D. [University College, London (United Kingdom)

1995-12-31T23:59:59.000Z

497

A joint optimal pricing, rebate value, and lot sizing model  

Science Journals Connector (OSTI)

Delayed incentives in the form of mail-in cash rebates are very popular among manufacturers, and more recently, among retailers. One of the main advantages of rebates is that while they increase demand, a small proportion of consumers redeem them. In this paper, we formulate and solve models for jointly determining the optimal price, rebate face value, and the optimal order quantity for a price and rebate sensitive deterministic demand. The models show that under realistic conditions, offering rebates can have significant pricing and inventory policy implications and can lead to a significant increase in profit.

Moutaz Khouja

2006-01-01T23:59:59.000Z

498

Phasing Renewable Energy Implementation | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Phasing Renewable Energy Implementation Phasing Renewable Energy Implementation Phasing Renewable Energy Implementation October 16, 2013 - 4:41pm Addthis If conventional or other renewable energy funding cannot be procured, or if an agency is working towards a higher goal for renewable energy usage that cannot be met with the current budget, agencies may choose to phase renewable energy into their project. This lays the groundwork and infrastructure now so that some or all of the renewable energy can easily be installed at a later date. A guide to phasing the development of renewable energy is the Solar Ready Buildings Planning Guide, developed by the National Renewable Energy Laboratory (NREL). The renewable energy project funding page has more information on applicable methods for financing the renewable energy system

499

Prepare comprehensive implementation plan | Open Energy Information  

Open Energy Info (EERE)

Prepare comprehensive implementation plan Prepare comprehensive implementation plan Jump to: navigation, search Stage 4 LEDS Home Introduction to Framework Assess current country plans, policies, practices, and capacities Develop_BAU Stage 4: Prioritizing and Planning for Actions Begin execution of implementation plans 1.0. Organizing the LEDS Process 1.1. Institutional Structure for LEDS 1.2. Workplan to Develop the LEDS 1.3. Roles and responsibilities to develop LEDS 2.1. Assess current country plans, policies, practices, and capacities 2.2. Compile lessons learned and good practices from ongoing and previous sustainable development efforts in the country 2.3. Assess public and private sector capacity to support initiatives 2.4. Assess and improve the national GHG inventory and other economic and resource data as needed for LEDS development

500

Memorandum, Adjudicative Guidelines Implementation - February 21, 2006 |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Adjudicative Guidelines Implementation - February 21, Adjudicative Guidelines Implementation - February 21, 2006 Memorandum, Adjudicative Guidelines Implementation - February 21, 2006 February 21,2006 The following adjudicative guidelines are established for all U.S. government civilian and military personnel, consultants, contractors, employees of contractors, licensees, certificate holders or grantees and their employees and other individuals who require access to classified information. "On December 29,2005, the President approved a revision of the Adjudicative Guidelines for Determining Eligibility for Access to Classified Information. The revised guidelines were distributed as an attachment to a memorandum f?om Stephen J. Hadley, Assistant to the President for National Security Affairs, addressed to William Leonard, Director of the Information Security