Powered by Deep Web Technologies
Note: This page contains sample records for the topic "jim francfort advanced" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Microsoft PowerPoint - Francfort 41st Power Sources Conference - backup.ppt  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Technology Vehicle Testing - 41 st Power Sources Conference Jim Francfort INEEL/CON-04-01691 DOE - Advanced Vehicle Testing Activity Presentation Outline * AVTA Goal * AVTA Testing Partners * Light-Duty Hybrid Electric Vehicle Testing * Hydrogen Fuel Pilot Plant * Hydrogen Internal Combustion Engine (ICE) Vehicle Testing * Neighborhood & Urban Electric Vehicles * WWW Information Address DOE - Advanced Vehicle Testing Activity AVTA Goal * Benchmark & validate the performance of light-, medium-, & heavy-duty vehicles that feature one or more advanced technologies, including: - ICE's burning advanced fuels, such as 100% hydrogen and hydrogen/CNG-blended fuels - Hybrid electric, pure electric, & hydraulic drive systems - Advanced batteries & engines -

2

Plug-in 2011: Initial PEV and Charging Infrastructure Test Results  

NLE Websites -- All DOE Office Websites (Extended Search)

Plug in 2011: Initial PEV and Charging in 2011: Initial PEV and Charging Infrastructure Test Results Infrastructure Test Results Jim Francfort Jim Francfort Jim Francfort Jim...

3

Jim O'Callaghan  

NLE Websites -- All DOE Office Websites (Extended Search)

O'Callaghan VP Sales & Marketing EnOcean, Salt Lake City, Utah jim.ocallaghan@enocean.com This Speaker's Seminars Wireless Sensors that Don't Require Batteries: Generating Energy...

4

Microsoft PowerPoint - vss033_carlson_2012_b.pptx  

NLE Websites -- All DOE Office Websites (Extended Search)

Electric Drive and Advanced Battery Electric Drive and Advanced Battery and Components Testbed (EDAB) and Components Testbed (EDAB) gov www.inl.g PI: Jim Francfort Presenter:...

5

Plug-in Hybrid Electric Vehicles (PHEVs) Overview  

NLE Websites -- All DOE Office Websites (Extended Search)

Program, Advanced Vehicle Testing Activity (AVTA) Plug-in Hybrid Electric Vehicles (PHEVs) Overview Jim Francfort AVTA Principle Investigator Local Climate Leadership Summit May...

6

PHEV and Other Electric Drive Testing Results and Resources  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Vehicle Testing Activity PHEV and Other Electric Drive Testing Results and Resources Jim Francfort Electric Drive Session Alternative Fuels & Vehicles Las Vegas, Nevada -...

7

Electric Drive Vehicles and Their Infrastructure Issues  

NLE Websites -- All DOE Office Websites (Extended Search)

Clean Cities Webinar - Electric Drive Vehicles and Their Infrastructure Issues (March 2010) Jim Francfort and Don Karner Advanced Vehicle Testing Activity March 24, 2010 This...

8

untitled  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Vehicle Testing Activity PHEV and Other Electric Drive Testing Results and Resources Jim Francfort Electric Drive Session Alternative Fuels & Vehicles Las Vegas, Nevada -...

9

No Slide Title  

NLE Websites -- All DOE Office Websites (Extended Search)

- Hybrid Electric Vehicle and Idle Reduction Technology Activities Jim Francfort DOE - Advanced Vehicle Testing Activity Presentation Outline * AVTA Goal * AVTA Testing Partners *...

10

Hybrid Electric and Pure Electric vehicle testing  

NLE Websites -- All DOE Office Websites (Extended Search)

Hybrid Electric and Pure Electric Vehicle Testing (Advanced Vehicle Testing Activity) Jim Francfort Discovery Center of Idaho - September 2005 INLCON-05-00693 HEV & EV Testing...

11

Hydrogen Fuel Pilot Plant and Hydrogen ICE Vehicle Testing  

NLE Websites -- All DOE Office Websites (Extended Search)

Fuel Pilot Plant and Hydrogen ICE Vehicle Testing Jim Francfort (INEEL) Don Karner (ETA) 2004 Fuel Cell Seminar - San Antonio Session 5B - Hydrogen DOE - Advanced Vehicle Testing...

12

NREL: Energy Analysis - Jim Leyshon  

NLE Websites -- All DOE Office Websites (Extended Search)

jim.leyshon@nrel.gov Areas of expertise Data visualization Green power markets Renewable energy financial opportunities Primary research interests State renewable energy policy...

13

From: Crawford, Jim [mailto:Jim.Crawford@irco.com]  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Crawford, Jim [mailto:Jim.Crawford@irco.com] Crawford, Jim [mailto:Jim.Crawford@irco.com] Sent: Friday, February 03, 2012 3:12 PM To: Regulatory.Review Cc: Vershaw, Jim Subject: Regulatory Burden RFI [76 FR 75798] David Cohen Assistant General Counsel for Legislation, Regulation and Energy Efficiency U.S. Department of Energy Office of General Counsel 1000 Independende Avenue SW Washington, DC 20585 Dear Mr. Cohen, The following comments are provided on behalf of Ingersoll Rand [IRCO], Residential Solutions, manufacturer of Trane and American Standard residential air conditioners, heat pumps, furnaces and accessories therefore. --- Ingersoll Rand appreciates the opportunity to comment on the Department of Energy's request for information on "Reducing Regulatory Burden" in the

14

Microsoft Word - Bio_JimRoberto.docx  

NLE Websites -- All DOE Office Websites (Extended Search)

Contact: Jim Roberto, robertojb@ornl.gov or call 865.574.4750 James B. Roberto Associate Lab Director Science & Technology Partnerships Jim Roberto is Associate Laboratory Director...

15

The Honorable Jim Gasparini~  

Office of Legacy Management (LM)

,,, ,,, ,: ,^ Department of Energy Washington, DC 20585 The Honorable Jim Gasparini~ ,' i,Municipal Plaza ,. .:. Bloomfield, New,Jersey 0003 ,. ; :. Dear Mayor Gasparini: : . ,:: l Secretary of Energy Hazel O'Leary-has announced, a n&approach.to openness in the Department of Energy (DOE,) and its coaununjcations with, the public.' In' ,.. support of.this .initiative, we are pleased to forward the enclosed information related,'to the-former.Bloomfjeld Tool Co. site,in your jurisdiction that performed work for DOE or its predecessor agencies. This information his provided for your information, use, and retention. .' ,.. DUE"s Formerly Utilized Sites Remedial .Action Program is responsible' for jdentification of sites used by DOE's predecessor agencies, determining their"

16

Jim Parks - Research Staff - FEERC  

NLE Websites -- All DOE Office Websites (Extended Search)

Jim Parks Group Leader, Emissions & Catalysis Research Group (T) 865-946-1283 (F) 865-946-1354 parksjeii@ornl.gov Education Ph.D., Physics, University of Tennessee, 1995 B.S.,...

17

Jim Nelson, Camp Joy Gardens  

E-Print Network (OSTI)

Rabkin: How do potential apprentices find their way to you?for adults, and hosts apprentices from all over the world.playful. Jim Nelson Women Apprentices and Chadwick Rabkin:

Rabkin, Sarah

2010-01-01T23:59:59.000Z

18

Jim Stock | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Jim Stock Jim Stock About Us Jim Stock - Member - White House Council of Economic Advisers James H. Stock is a member of the Council of Economic Advisers and is responsible for offering the President objective advice on the formulation of economic policy. Stock was previously the Chief Economist for the Council of Economic Advisers. He is on leave from Harvard University where he is the Harold Hitchings Burbank Professor of Political Economy in the Department of Economics, with a dual appointment in the Harvard Kennedy School. Dr. Stock served as Chair of the Harvard Economics Department from 2006 to 2009 and has been a professor at Harvard continuously since 1983, with the exception of a two-year appointment at UC Berkeley from 1990 to 1991. His research focuses on macroeconomic forecasting, monetary policy, and

19

Searching for Jim Gray: a technical overview  

Science Conference Proceedings (OSTI)

The volunteer search for Jim Gray, lost at sea in 2007, highlights the challenges of computer-aided emergency response.

Joseph M. Hellerstein; David L. Tennenhouse

2011-07-01T23:59:59.000Z

20

Jim Thomas, 1946-2010  

Science Conference Proceedings (OSTI)

Jim Thomas, a visionary scientist and inspirational leader, died on 6 August 2010 in Richland, Washington. His impact on the fields of computer graphics, user interface software, and visualization was extraordinary, his ability to personally change peoples lives even more so. He is remembered for his enthusiasm, his mentorship, his generosity, and, most of all, his laughter. This collection of remembrances images him through the eyes of his many friends.

Stone, Maureen; Kasik, David; Bailey, Mike; van Dam, Andy; Dill, John; Rhyne, Theresa-Marie; Foley, Jim; Encarnacao, L. M.; Rosenblum, Larry; Earnshaw, Rae; Ma, Kwan-Liu; Wong, Pak C.; Encarnacao, Jose; Fellner, Dieter; Urban, Bodo

2010-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "jim francfort advanced" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Microsoft Word - Altima 7982 Battery Final Report_edited - Jim...  

NLE Websites -- All DOE Office Websites (Extended Search)

78 2007 Nissan Altima-7982 Hybrid Electric Vehicle Battery Test Results Tyler Gray Chester Motloch James Francfort January 2010 The Idaho National Laboratory is a U.S. Department...

22

Microsoft Word - Camry 7129 Battery Final Report_edited - Jim...  

NLE Websites -- All DOE Office Websites (Extended Search)

7 Toyota Camry-7129 Hybrid Electric Vehicle Battery Test Results Tyler Gray Chester Motloch James Francfort January 2010 The Idaho National Laboratory is a U.S. Department of...

23

Microsoft Word - Lexus 2575 Battery Final Report_edited - Jim...  

NLE Websites -- All DOE Office Websites (Extended Search)

6 2006 Lexus RX400h-2575 Hybrid Electric Vehicle Battery Test Results Tyler Gray Chester Motloch James Francfort January 2010 The Idaho National Laboratory is a U.S. Department of...

24

Microsoft Word - Lexus 4807 Battery Final Report_edited - Jim...  

NLE Websites -- All DOE Office Websites (Extended Search)

7 2006 Lexus RX400h-4807 Hybrid Electric Vehicle Battery Test Results Tyler Gray Chester Motloch James Francfort January 2010 The Idaho National Laboratory is a U.S. Department of...

25

Microsoft Word - Altima 2351 Battery Final Report_edited - Jim...  

NLE Websites -- All DOE Office Websites (Extended Search)

81 2007 Nissan Altima-2351 Hybrid Electric Vehicle Battery Test Results Tyler Gray Chester Motloch James Francfort January 2010 The Idaho National Laboratory is a U.S. Department...

26

Microsoft Word - Camry 6330 Battery Final Report_edited - Jim...  

NLE Websites -- All DOE Office Websites (Extended Search)

09-15276 2007 Toyota Camry-6330 Hybrid Electric Vehicle Battery Test Results Tyler Gray Chester Motloch James Francfort January 2010 The Idaho National Laboratory is a U.S....

27

Physicist Jim Hammer receives prestigious Edward Teller Award  

NLE Websites -- All DOE Office Websites (Extended Search)

232013 Physicist Jim Hammer receives prestigious Edward Teller Award Breanna Bishop, LLNL, (925) 423-9802, bishop33@llnl.gov High Resolution Image Jim Hammer Jim Hammer, a...

28

On Road Fuel Economy Performance of Hybrid Electric Vehicles  

NLE Websites -- All DOE Office Websites (Extended Search)

Road Fuel Economy Performance of Hybrid Electric Vehicles Lee Slezak Office of FreedomCAR and Vehicle Technologies U.S. Department of Energy Jim Francfort Advanced Vehicle Testing...

29

Microsoft Word - AVTA INL EVS24 4-15-2009.doc  

NLE Websites -- All DOE Office Websites (Extended Search)

U.S. Department of Energy - Advanced Vehicle Testing Activity: Plug-in Hybrid Electric Vehicle Testing and Demonstration Activities John Smart 1 , Jim Francfort 2 , Don Karner 3 ,...

30

2003 PACIFIC NORTHWEST SPRING CANOLA VARIETY TRIAL RESULTS Jim B. Davis1  

E-Print Network (OSTI)

2003 PACIFIC NORTHWEST SPRING CANOLA VARIETY TRIAL RESULTS Jim B. Davis1 , Jack Brown1 , Don University 3 Montana State University ABSTRACT A canola variety trial with 34 cultivars or advanced breeding Northwest continue to show a strong interest in spring canola, (Brassica napus and B. rapa). Spring canola

Brown, Jack

31

2008 PACIFIC NORTHWEST WINTER CANOLA VARIETY TRIAL RESULTS Jim B. Davis1  

E-Print Network (OSTI)

2008 PACIFIC NORTHWEST WINTER CANOLA VARIETY TRIAL RESULTS Jim B. Davis1 , Mary Lauver1 , Jack Agricultural Research Center, Oregon State University, Pendleton, OR ABSTRACT A winter rapeseed and canola variety trial with 19 canola or industrial rapeseed (Brassica napus) cultivars or advanced breeding lines

Brown, Jack

32

2007 PACIFIC NORTHWEST WINTER CANOLA VARIETY TRIAL RESULTS Jim B. Davis1  

E-Print Network (OSTI)

2007 PACIFIC NORTHWEST WINTER CANOLA VARIETY TRIAL RESULTS Jim B. Davis1 , Mary Lauver1 , Jack Agricultural Research Center, Oregon State University, Pendleton, OR ABSTRACT A winter rapeseed and canola variety trial with 22 canola or industrial rapeseed (Brassica napus) cultivars or advanced breeding lines

Brown, Jack

33

2004 PACIFIC NORTHWEST SPRING CANOLA VARIETY TRIAL RESULTS Jim B. Davis1  

E-Print Network (OSTI)

2004 PACIFIC NORTHWEST SPRING CANOLA VARIETY TRIAL RESULTS Jim B. Davis1 , Jack Brown1 , Don State University, Kalispell, MT ABSTRACT A canola variety trial with 28 cultivars or advanced breeding in the Pacific Northwest continue to show a strong interest in spring canola, (Brassica napus and B. rapa

Brown, Jack

34

2011 PACIFIC NORTHWEST SPRING CANOLA VARIETY TRIAL RESULTS Jim B. Davis1  

E-Print Network (OSTI)

2011 PACIFIC NORTHWEST SPRING CANOLA VARIETY TRIAL RESULTS Jim B. Davis1 , Jack Brown1 , Megan canola and rapeseed variety trial with 27 cultivars or advanced breeding lines and five control cultivars in the Pacific Northwest continue to show a strong interest in spring canola (Brassica napus and B. rapa

Brown, Jack

35

2006 PACIFIC NORTHWEST WINTER CANOLA VARIETY TRIAL RESULTS Jim B. Davis1  

E-Print Network (OSTI)

2006 PACIFIC NORTHWEST WINTER CANOLA VARIETY TRIAL RESULTS Jim B. Davis1 , Jack Brown1 , and Don Center, Oregon State University, Pendleton, OR ABSTRACT A winter rapeseed and canola variety trial with 16 canola or industrial rapeseed (Brassica napus) cultivars or advanced breeding lines and three

Brown, Jack

36

2005 PACIFIC NORTHWEST WINTER CANOLA VARIETY TRIAL RESULTS Jim B. Davis1  

E-Print Network (OSTI)

2005 PACIFIC NORTHWEST WINTER CANOLA VARIETY TRIAL RESULTS Jim B. Davis1 , Jack Brown1 , and Don Center, Oregon State University, Pendleton, OR ABSTRACT A winter rapeseed and canola variety trial with 15 canola or industrial rapeseed (Brassica napus) cultivars or advanced breeding lines and five

Brown, Jack

37

2002-2003 PACIFIC NORTHWEST WINTER CANOLA VARIETY TRIAL RESULTS Jim B. Davis1  

E-Print Network (OSTI)

2002-2003 PACIFIC NORTHWEST WINTER CANOLA VARIETY TRIAL RESULTS Jim B. Davis1 , Jack Brown1 A winter rapeseed and canola variety trial with 17 canola (Brassica napus) cultivars or advanced breeding of this new production has been with cultivars that produce canola quality oil and meal. Many new cultivars

Brown, Jack

38

2009-2010 PACIFIC NORTHWEST WINTER CANOLA VARIETY TRIAL Jim B. Davis1  

E-Print Network (OSTI)

2009-2010 PACIFIC NORTHWEST WINTER CANOLA VARIETY TRIAL Jim B. Davis1 , Jack Brown1 , Don Wysocki2 Research Center, Oregon State University, Pendleton, OR ABSTRACT A winter rapeseed and canola variety trial with 23 canola or industrial rapeseed (Brassica napus or B. rapa) cultivars or advanced breeding lines

Brown, Jack

39

Fermilab | Directorate | Director Profiles | Jim Strait  

NLE Websites -- All DOE Office Websites (Extended Search)

Jim Strait Jim Strait LBNE Project Manager As the LBNE Project Manager, I have the overall responsibility and authority to execute the LBNE Project, and to meet the approved scientific, cost and schedule goals of the project. In this role, I lead and direct the development of the technical, cost and schedule baseline for the project and the construction of the project defined by the approved baseline. I also prepare for and establish management systems, consistent with DOE and Fermilab Project Management orders and structures, to ensure that the project is successfully executed. I also represent the Project in interactions with the LBNE collaboration, Fermilab management, management of other participating national laboratories, and the Department of Energy. As the LBNE project manager, I report to the laboratory director. I head

40

Note Date Preliminary Title Speaker Institution Email Contact Aug 29, 2012 The Discovery of the Higgs Boson Jim Alexander Cornell jim.alexander@cornell.edu Napolitano  

E-Print Network (OSTI)

of the Higgs Boson Jim Alexander Cornell jim.alexander@cornell.edu Napolitano JN Away Sep 5, 2012 Live 3D

Varela, Carlos

Note: This page contains sample records for the topic "jim francfort advanced" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Jim Walter Resources installs new overland conveyor  

Science Conference Proceedings (OSTI)

Embarking on a major expansion plan, the company is constructing a new additional overland conveyor coal to a recently refurbished prep plant. Jim Walter Resources recently invested $20 million in a new 5-mile overland conveyor system to haul coal from the No.7 deep coal mine in Alabama to the No.5 coal preparation plant. The size of the No.7 mine was effectively doubled. The article describes how this expansion move was decided upon and describes the design and installation of the new conveyor which spans approximately 5 miles. 4 photos.

Fiscor, S.

2008-12-15T23:59:59.000Z

42

Leading the Charge: Jim Manion | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Leading the Charge: Jim Manion Leading the Charge: Jim Manion Leading the Charge: Jim Manion February 23, 2012 - 5:23pm Addthis Jim Manion, Confederated Tribes of the Warm Springs Reservation of Oregon Jim Manion, Confederated Tribes of the Warm Springs Reservation of Oregon What are the greatest energy development opportunities for Indian Country? Bring power to communities within Indian Country that currently don't have energy Create needed jobs that offer tribal members opportunities to earn incomes sufficient to support their families Generate revenue through energy sales, which fosters tribal self-sufficiency Change doesn't happen on its own. It's led by dedicated and passionate people who are committed to empowering Indian Country to energize future generations. Leading the Charge is a regular Office of Indian Energy

43

Leading the Charge: Jim Manion | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Jim Manion Jim Manion Leading the Charge: Jim Manion February 23, 2012 - 5:23pm Addthis Jim Manion, Confederated Tribes of the Warm Springs Reservation of Oregon Jim Manion, Confederated Tribes of the Warm Springs Reservation of Oregon What are the greatest energy development opportunities for Indian Country? Bring power to communities within Indian Country that currently don't have energy Create needed jobs that offer tribal members opportunities to earn incomes sufficient to support their families Generate revenue through energy sales, which fosters tribal self-sufficiency Change doesn't happen on its own. It's led by dedicated and passionate people who are committed to empowering Indian Country to energize future generations. Leading the Charge is a regular Office of Indian Energy

44

Energy Secretary Steven Chu Meets with Wisconsin Governor Jim Doyle |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Meets with Wisconsin Governor Jim Doyle Meets with Wisconsin Governor Jim Doyle Energy Secretary Steven Chu Meets with Wisconsin Governor Jim Doyle March 3, 2009 - 12:00am Addthis Washington, D.C. - U.S. Energy Secretary Steven Chu met with Wisconsin Governor Jim Doyle today about the important investments in the President's American Recovery and Reinvestment Act - investments that will help Wisconsin and other states to create jobs, save families on their energy bills and address the climate crisis. Secretary Chu stressed the important role that state and local governments will play in ensuring that Recovery Act funds are invested quickly, effectively and responsibly. He pledged a close partnership with state and local governments, and promised to reduce unnecessary paperwork and streamline the process so that important investments that will create jobs

45

Energy Secretary Steven Chu Meets with Wisconsin Governor Jim Doyle |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energy Secretary Steven Chu Meets with Wisconsin Governor Jim Doyle Energy Secretary Steven Chu Meets with Wisconsin Governor Jim Doyle Energy Secretary Steven Chu Meets with Wisconsin Governor Jim Doyle March 3, 2009 - 12:00am Addthis Washington, D.C. - U.S. Energy Secretary Steven Chu met with Wisconsin Governor Jim Doyle today about the important investments in the President's American Recovery and Reinvestment Act - investments that will help Wisconsin and other states to create jobs, save families on their energy bills and address the climate crisis. Secretary Chu stressed the important role that state and local governments will play in ensuring that Recovery Act funds are invested quickly, effectively and responsibly. He pledged a close partnership with state and local governments, and promised to reduce unnecessary paperwork and

46

From: Jim Burson <jburson@swtransco.coop>  

NLE Websites -- All DOE Office Websites (Extended Search)

Jim Burson Jim Burson <jburson@swtransco.coop> To: "dswpwrmrk@wapa.gov" CC: Donald Kimball , Patrick Ledger , Richard Kurtz Date: 10/20/10 8:25 AM Subject: ED5-Palo Verde Hub Project (SPPR Proposal) Attachments: westernspprsupport.docx.pdf Dear Mr. Moe: Southwest Transmission Cooperative, Inc. (SWTC) is a customer of Western Area Power Administration (Western). We have multiply Parker- Davis Project transmission service contracts with Western. SWTC agrees with the attached SPPR letter, supporting the expansion of the Parker-Davis Project to include the ED5-Palo Verde Hub project referred to in Western's October 6th open meeting as the "SPPR

47

Irish Representations in the Films of Jim Sheridan and Neil Jordan.  

E-Print Network (OSTI)

??This thesis explores four films from "second wave" directors Jim Sheridan and Neil Jordan: The Crying Game, The Butcher Boy, The Field, and The Boxer. (more)

Jack, Jeffrey K.

2005-01-01T23:59:59.000Z

48

Operations Jim Irby MIT-PSFC DoE  

NLE Websites -- All DOE Office Websites (Extended Search)

Operations Operations Jim Irby MIT-PSFC DoE Quarterly 4/28/2005 Outline * Machine status and run statistics * Cryopump Development * Status of other projects * Short term plans DoE Quarterly 4/28/2005 Machine Status and Run Statistics History * C-Mod resumed plasma operation on Feb 4 th 2005 * Number of discharges so far this campaign: 684 * Startup reliability including plasma conditioning period: 75% * Startup reliability last two weeks: 87% Major Tasks * Moly/BN comparison * Commissioning of lower hybrid system * Commissioning of Long Pulse DNB DoE Quarterly 4/28/2005 Status * Pre-boronization run period complete * Vessel is now boronized with very low H/(H+D) * Lower hybrid and DNB commissioning ongoing (detailed talks to follow) * 6.75 weeks of our 17 week campaign have been completed - C-Mod Runs

49

Idaho National Laboratory Update on DE-FOA-000667 Wireless Charging...  

NLE Websites -- All DOE Office Websites (Extended Search)

Vehicles Jim Francfort Brent Warr www Brent Warr Richard Carlson CERV 2013 Park City, Utah February 2013 Presentation Outline * INL and Vehicle Technology Experience * Conductive...

50

Microsoft Word - 02-00236_LoanerFinal.doc  

NLE Websites -- All DOE Office Websites (Extended Search)

INEELEXT-02-00236 February 2002 National Federal Fleet Loaner Program Final Report Jim Francfort Mindy Carroll INEELEXT-02-00236 National Federal Fleet Loaner Program Final...

51

untitled  

NLE Websites -- All DOE Office Websites (Extended Search)

Workshop - AVTA's PHEV Testing and Demonstration Activities Jim Francfort BC Hydro and Powertech Labs Vancouver, British Columbia. October 2008 This presentation does...

52

untitled  

NLE Websites -- All DOE Office Websites (Extended Search)

in 2013 - EV Project Charging Infrastructure Deployment Costs, Cost Drivers and Use Jim Francfort Idaho National Laboratory Session B3: Getting the Cost Out - Best Practices for...

53

Electric Vehicle Fleet  

NLE Websites -- All DOE Office Websites (Extended Search)

A98 0577 Electric Vehicle Fleet Operations in the United States Jim Francfort Presented to: 31st International Symposium on Automotive Technology and Automation Dusseldorf, Germany...

54

Microsoft PowerPoint - Future Car Slides.ppt  

NLE Websites -- All DOE Office Websites (Extended Search)

Field Operations Program Electric and Hybrid Vehicle Testing Jim Francfort Technical Program Manager - INEEL Lee Slezak Program Manager - U.S. Department of Energy DOE Field...

55

Virginia EV Road Show - PHEV Operations and Performance  

NLE Websites -- All DOE Office Websites (Extended Search)

- Virginia EV Road Show - PHEV Operations and Performance Jim Francfort Virginia Clean Cities and Hampton Roads Clean Cities Coalition - Virginia Electric Drive Road Show Poquoson,...

56

Jim's Hot Springs Pool & Spa Low Temperature Geothermal Facility | Open  

Open Energy Info (EERE)

Jim's Hot Springs Pool & Spa Low Temperature Geothermal Facility Jim's Hot Springs Pool & Spa Low Temperature Geothermal Facility Jump to: navigation, search Name Jim's Hot Springs Pool & Spa Low Temperature Geothermal Facility Facility Jim's Hot Springs Sector Geothermal energy Type Pool and Spa Location New Meadows, Idaho Coordinates 44.9712808°, -116.2840176° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[]}

57

2008 PACIFIC NORTHWEST SPRING CANOLA VARIETY TRIAL RESULTS Jim B. Davis1  

E-Print Network (OSTI)

2008 PACIFIC NORTHWEST SPRING CANOLA VARIETY TRIAL RESULTS Jim B. Davis1 , Mary Lauver1 , Jack Agricultural Research Center, Oregon State University, Pendleton, OR ABSTRACT A spring canola and rapeseed a strong interest in spring canola (Brassica napus and B. rapa). Spring canola offers growers

Brown, Jack

58

2005 PACIFIC NORTHWEST SPRING CANOLA VARIETY TRIAL RESULTS Jim B. Davis1  

E-Print Network (OSTI)

2005 PACIFIC NORTHWEST SPRING CANOLA VARIETY TRIAL RESULTS Jim B. Davis1 , Jack Brown1 , Don and Extension Center, Washington State University, Prosser, WA ABSTRACT A canola variety trial with 27 cultivars in the Pacific Northwest continue to show a strong interest in spring canola (Brassica napus and B. rapa). Spring

Brown, Jack

59

2006 PACIFIC NORTHWEST SPRING CANOLA VARIETY TRIAL RESULTS Jim B. Davis1  

E-Print Network (OSTI)

2006 PACIFIC NORTHWEST SPRING CANOLA VARIETY TRIAL RESULTS Jim B. Davis1 , Jack Brown1 , and Don Center, Oregon State University, Pendleton, OR ABSTRACT A spring canola and rapeseed variety trial canola (Brassica napus and B. rapa). Spring canola offers growers an alternative crop for rotation

Brown, Jack

60

2001 PACIFIC NORTHWEST SPRING CANOLA VARIETY TRIAL RESULTS Jim B. Davis1  

E-Print Network (OSTI)

2001 PACIFIC NORTHWEST SPRING CANOLA VARIETY TRIAL RESULTS Jim B. Davis1 , Jack Brown1 , and Don Wysocki2 1 PSES Dept., Univ. of Idaho, Moscow, ID 83844-2339; Oregon State University2 ABSTRACT A canola in the Pacific Northwest continues to show a strong interest in spring canola, (Brassica napus and B. rapa

Brown, Jack

Note: This page contains sample records for the topic "jim francfort advanced" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

2009 PACIFIC NORTHWEST SPRING CANOLA VARIETY TRIAL RESULTS Jim B. Davis1  

E-Print Network (OSTI)

2009 PACIFIC NORTHWEST SPRING CANOLA VARIETY TRIAL RESULTS Jim B. Davis1 , Jack Brown1 , Don Agricultural Research Center, Oregon State University, Pendleton, OR ABSTRACT A spring canola and rapeseed a strong interest in spring canola (Brassica napus and B. rapa). Spring canola offers growers

Brown, Jack

62

2004 PACIFIC NORTHWEST WINTER CANOLA VARIETY TRIAL RESULTS Jim B. Davis1  

E-Print Network (OSTI)

2004 PACIFIC NORTHWEST WINTER CANOLA VARIETY TRIAL RESULTS Jim B. Davis1 , Jack Brown1 , Don State University, Kalispell, MT ABSTRACT A winter rapeseed and canola variety trial with 27 canola, and much of this new production has been with cultivars that produce canola quality oil and meal. Many new

Brown, Jack

63

2007 PACIFIC NORTHWEST SPRING CANOLA VARIETY TRIAL RESULTS Jim B. Davis1  

E-Print Network (OSTI)

2007 PACIFIC NORTHWEST SPRING CANOLA VARIETY TRIAL RESULTS Jim B. Davis1 , Mary Lauver1 , Jack Agricultural Research Center, Oregon State University, Pendleton, OR ABSTRACT A spring canola and rapeseed continue to show a strong interest in spring canola (Brassica napus and B. rapa). Spring canola offers

Brown, Jack

64

2010 PACIFIC NORTHWEST SPRING CANOLA VARIETY TRIAL RESULTS Jim B. Davis1  

E-Print Network (OSTI)

2010 PACIFIC NORTHWEST SPRING CANOLA VARIETY TRIAL RESULTS Jim B. Davis1 , Jack Brown1 , Don Agricultural Research Center, Oregon State University, Pendleton, OR ABSTRACT A spring canola and rapeseed in the Pacific Northwest continue to show a strong interest in spring canola (Brassica napus and B. rapa). Spring

Brown, Jack

65

2002 PACIFIC NORTHWEST SPRING CANOLA VARIETY TRIAL RESULTS Jim B. Davis1  

E-Print Network (OSTI)

2002 PACIFIC NORTHWEST SPRING CANOLA VARIETY TRIAL RESULTS Jim B. Davis1 , Jack Brown1 , and Don Wysocki2 1 PSES Dept., Univ. of Idaho, Moscow, ID 83844-2339; Oregon State University2 ABSTRACT A canola in the Pacific Northwest continues to show a strong interest in spring canola, (Brassica napus and B. rapa

Brown, Jack

66

CSP 586: Software Modeling and Development with UML Jim Conallen. Building Web Applications with UML, Addison-Wesley  

E-Print Network (OSTI)

CSP 586: Software Modeling and Development with UML Texts Jim Conallen. Building Web Applications · UML for Web Design 3 hours Total 45 hours CSP 586: Software Modeling and Development with UML 1 of 1

Heller, Barbara

67

Unity, Justice and Protection: The Colored Trainmen of America's Struggle to End Jim Crow in the American Railroad Industry [and Elsewhere  

E-Print Network (OSTI)

The Colored Trainmen of America (CTA) actively challenged Jim Crow policies on the job and in the public sphere between the 1930s and 1950s. In response to lingering questions concerning the relationship between early black labor activism and civil rights protest, this study goes beyond both local lure and cursory research. This study examines the Colored Trainmen's major contributions to the advancement of African Americans. It also provides context for some of the organization's shortcomings in both realms. On the job the African American railroad workers belonging to the CTA fought valiantly to receive the same opportunities for professional growth and development as whites working in the operating trades of the railroad industry. In the public sphere, these men collectively protested second-class services and accommodations both on and off the clock. Neither their agenda, the scope of their activities, nor their influence was limited to the railroad lines the members of the CTA operated within the Gulf Coast region. The CTA belonged to a progressive coalition comprised of four other powerful independent African American labor unions committed to unyielding labor activism and the toppling of Jim Crow. Together, they all worked to effectuate meaningful social change in partnership with national civil rights attorney Charles H. Houston. Houston's experience and direction, coupled with the CTA's dedicated membership and willingness to challenge authority, created considerable momentum in movements aimed at toppling racial inequality in the workplace and elsewhere. Like most of their predecessors, the CTA's struggle for advancement fits within a continuum of successive challenges to economic exploitation and racial inequality. No single person or organization can take full credit for ending segregation or achieving equality. Many who remain nameless and faceless contributed and sacrificed. This study not only chronicles the contribution of a relatively unsung African American labor organization that waged war against Jim Crow on two different fronts, it also pays homage to a few more individuals who made a difference in the lives of an entire race of people during the course of a bitterly contested, never-ending struggle for racial equality in the United States of America during the twentieth century.

James, Ervin

2012-08-01T23:59:59.000Z

68

Jim Rothfuss  

NLE Websites -- All DOE Office Websites (Extended Search)

Rothfuss Computer Protection Program Manager (CPPM) Computing Sciences Directorate Lawrence Berkeley National Laboratory This speaker was a visiting speaker who delivered a talk or...

69

2012 Advanced Applications Research & Development Peer Review - Day 2  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2 Presentations 2 Presentations 2012 Advanced Applications Research & Development Peer Review - Day 2 Presentations The Advanced Applications Research & Development Peer Review included seven sessions over 2 days on June 12 - 13, 2012. Presentations from Day 2 (Sessions VI and VII) are available below. Session VI: Yuri Makarov, Henry Huang, Jim McCalley Session VII: Carlos Martinez, Pete Sauer, Gil Tam 2012 Advanced Applications R&D Peer Review - Real-Time Wide-Area Montoring Tool Based on CELL Method - Yuri Makarov, PNNL 2012 Advanced Applications R&D Peer Review - Modal Analysis for Grid Operations (MANGO) - Henry Huang, PNNL 2012 Advanced Applications R&D Peer Review - New Security Tools for Real-Time Operations - Jim McCalley, Iowa State 2012 Advanced Applications R&D Peer Review - Automatic Reliability Reports

70

Technical Memorandum To: File From: Jim Eidem Subject: Environmental Soil Data, Proposed Turbine Area, UMore Park  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Technical Memorandum Technical Memorandum To: File From: Jim Eidem Subject: Environmental Soil Data, Proposed Turbine Area, UMore Park Date: October 1, 2010 Project: 23191060.00 c: Brian Kombrink (Ryan Co.), Janet Dalgleish (UMN), Dan Mielke (UMN), Jeff Marr (UMN), John Wachtler (Barr) Attached is a table summarizing the analytical data from the proposed wind turbine area and a map showing the locations of the test trenches. On May 19, 2010, a total of seventeen soil samples were collected from the original proposed turbine location, turbine laydown area, met tower location, and the area in the immediate vicinity of the met tower. Fourteen of the samples were collected at the ground surface (to evaluate soil disturbed during initial site clearing) and three samples were collected at depth in

71

Microsoft PowerPoint - DOE_Tech_Conf_Jim_Busbin.ppt  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

IDC and Its Data as Used in the IDC and Its Data as Used in the IDC and Its Data as Used in the IDC and Its Data as Used in the Interpretation of Congestion in Interpretation of Congestion in the Eastern Interconnection the Eastern Interconnection Jim Busbin Chair, NERC IDC Working Group Spring 2009 Technical Conference - DOE 2009 Congestion Study Crowne Plaza Chicago O'Hare Hotel & Conference Center March 25-26, 2009 IDC 2007 historical data was provided for the DOE 2009 Congestion Study. Important to understand what the IDC is and what it does. Developed in the 1998-99 timeframe when volume of schedules was increasing significantly. Purpose of the IDC is to aid Reliability Coordinators in the Eastern Interconnection in implementing the Transmission Loading Relief (TLR) procedures as specified by NERC in Reliability Standard IRO-006 and

72

ESS 2012 Peer Review - Wholesale Electricity Market Design Project - Jim Ellison, SNL  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Photos placed in Photos placed in horizontal position with even amount of white space between photos and header Photos placed in horizontal position with even amount of white space between photos and header Wholesale Electricity Market Design Project September 28, 2012 Jim Ellison, Verne Loose, Ray Byrne, Cesar Silva Monroy, and Ryan Elliott Sandia National Laboratories Leigh Tesfatsion Iowa State University DOE Energy Storage Program Peer Review 2012 Introduction - Motivation for a New Market Design  Need to eliminate market bias of resource classes such as Energy Storage  Need to accommodate new technologies, without the need to change market rules  Move away from resource-centric markets toward service-centric markets

73

Hybrid Electric Vehicle Testing  

NLE Websites -- All DOE Office Websites (Extended Search)

Transportation Association Conference Transportation Association Conference Vancouver, Canada December 2005 Hybrid Electric Vehicle Testing Jim Francfort U.S. Department of Energy - FreedomCAR & Vehicle Technologies Program, Advanced Vehicle Testing Activity INL/CON-05-00964 Presentation Outline * Background & goals * Testing partners * Hybrid electric vehicle testing - Baseline performance testing (new HEV models) - 1.5 million miles of HEV fleet testing (160k miles per vehicle in 36 months) - End-of-life HEV testing (rerun fuel economy & conduct battery testing @ 160k miles per vehicle) - Benchmark data: vehicle & battery performance, fuel economy, maintenance & repairs, & life-cycle costs * WWW information location Background * Advanced Vehicle Testing Activity (AVTA) - part of the

74

Oregon E.V. Road Map - Electric Drive Vehicle (PHEVs) Testing...  

NLE Websites -- All DOE Office Websites (Extended Search)

Oregon E.V. Road Map - Electric Drive Vehicle (PHEVs) Testing Activities and Results Jim Francfort E.V. Road Map - Preparing Oregon for the Introduction of Electric Vehicles...

75

untitled  

NLE Websites -- All DOE Office Websites (Extended Search)

Oregon E.V. Road Map - Electric Drive Vehicle (PHEVs) Testing Activities and Results Jim Francfort E.V. Road Map - Preparing Oregon for the Introduction of Electric Vehicles...

76

untitled  

NLE Websites -- All DOE Office Websites (Extended Search)

with the EU gov Collaboration with the EU www.inl.g Jim Francfort w U.S. DOE's EV and Smart Grid Interoperability Center Argonne National Laboratory July 18 2013 July 18, 2013...

77

Jim Crow America and the Marines of Montford Point in the World War II Era  

E-Print Network (OSTI)

The Marines of Montford Point are largely absent from the World War II narrative, and relatively unknown to individuals in the military services and to the public at large. After 144 years of official policy against allowing blacks to serve their country as U.S. Marines, on June 1, 1942, the nation's first black Marines broke the color barrier, gaining entry into a military organization that today carries with it tremendous symbolic and mythic significance in America. Moreover, serving in harm's way to defend a prejudiced nation, black Marines demonstrated bravery and endurance in the face of institutionalized racism. This thesis examines the southern Jim Crow experiences of selected northern African American Marines, focusing on the ways in which these men responded to the discrimination they encountered in the South. It also explores the reasons why these men joined the most racist branch of the military and what knowledge they had of Executive Order 8802 and the Navy Department's May 20, 1942, press release, announcing the Marine Corps's plans for recruiting blacks. Furthermore, it examines the various ways in which all African American Marines coped with Jim Crow laws, and explores the realities that black and white American society created about black Marines and their wartime service. It also discusses how northern and southern black Marines engaged and interacted within a strict segregationist military organization, particularly in how the Marine Corps manipulated the Selective Service in order to protect what senior officers considered to be its elitist image. The comparison to the U.S. Army's framework of task organization and combat employment of black soldiers reveals that the Army made greater strides toward racial justice and equality by allowing blacks to serve as commissioned officers, albeit in segregated units; whereas the Marine Corps instituted no comparable reform. After the war began, the Marines could have commissioned African Americans by following the models of all-black units such as the 93rd Infantry Division and the Tuskegee Airmen. In sum, initial racial opinions shifted differently in each military service during the war; and for black Marines, it officially marked a new tradition of military service.

McCoy, Cameron Demetrius

2011-12-01T23:59:59.000Z

78

FNS Presentation - Hydrogen Station & Hydrogen ICE Vehicles Operation  

NLE Websites -- All DOE Office Websites (Extended Search)

Hydrogen Station & Hydrogen ICE Hydrogen Station & Hydrogen ICE Vehicle Operations Federal Network for Sustainability Idaho Falls, Idaho - July 2006 Jim Francfort INL/CON-06-11569 Presentation Outline * Background & Goal * Arizona Public Service (APS) Alternative Fuel (Hydrogen) Pilot Plant - design & operations * Fuel Dispensing * Hydrogen & HCNG Internal Combustion Engine (ICE) Vehicle Testing Activities * Briefly, other AVTA Activities * WWW Information 2 AVTA Background & Goal * Advanced Vehicle Testing Activity (AVTA) is part of the U.S. Department of Energy's (DOE) FreedomCAR and Vehicle Technologies Program * These activities are conducted by the Idaho National Laboratory (INL) & the AVTA testing partner Electric Transportation Applications (ETA) * AVTA Goal - Provide benchmark data for technology

79

No Slide Title  

NLE Websites -- All DOE Office Websites (Extended Search)

- - Hydrogen Pilot Plant and H2-ICE Vehicle Activities Jim Francfort Idaho State University November 2006 INL/MIS-06-11935 Presentation Outline * Background & Goal * Arizona Public Service (APS) Alternative Fuel (Hydrogen) Pilot Plant - design & operations - Hydrogen subsystem - CNG subsystem - Auxiliary & Safety systems * Fuel Dispensing * Hydrogen & HCNG Internal Combustion Engine (ICE) Vehicle Testing Activities * Gen II station * Barriers & Applications * WWW Information AVTA Background & Goal * Advanced Vehicle Testing Activity (AVTA) is part of the U.S. Department of Energy's FreedomCAR and Vehicle Technologies Program * These activities are managed by the Idaho National Laboratory (INL also performs data analysis and reporting activities) * AVTA Goal -

80

Ref: JA/16/2013 Principal: Professor Sir Jim McDonald  

E-Print Network (OSTI)

applications. HVDC transmission. Selected references: 1. F. L. Luo, H. Ye, Power Electronics ­ Advanced

Swain, Peter

Note: This page contains sample records for the topic "jim francfort advanced" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

James Francfort Idaho National Engineering and Environmental...  

NLE Websites -- All DOE Office Websites (Extended Search)

reliability, and fleet testing Incremental Funding Program * Provides incremental funding to Federal Fleets leasing electric vehicles National Loaner Program * In...

82

Memo To: NW Energy Efficiency Taskforce Executive Committee From: Jim West, Chair -RTF Policy Advisory Committee  

E-Print Network (OSTI)

Advanced Roof-top heating and cooling units LED street and area lighting with advanced networked controls for estimating savings, coordination of research to improve savings estimates, and reporting on region Development; Research Projects & Data Development; Regional Coordination. iii) RTF Member Support

83

advance brochure (pdf)  

Science Conference Proceedings (OSTI)

The Chinese Society for Metals (CSM). Materials Australia. (MA). The Minerals,. Metals & Materials. Society (TMS). The Japan Institute of Metals (JIM).

84

An Approach to Generating Summaries of Time Series Data in the Gas Turbine Domain Jin Yu and Jim Hunter and Ehud Reiter and Somayajulu Sripada  

E-Print Network (OSTI)

An Approach to Generating Summaries of Time Series Data in the Gas Turbine Domain Jin Yu and Jim an approach to generating summaries of time series data in the gas turbine domain using AI techniques. Through), both domain knowledge from experts about how to solve problems in the gas turbine and information about

Sripada, Yaji

85

2008 PACIFIC NORTHWEST MUSTARD VARIETY TRIAL RESULTS Jim B. Davis1  

E-Print Network (OSTI)

, and Don Wysocki2 1 PSES Dept., University of Idaho, Moscow, ID 83844-2339 2 Columbia Basin Agricultural or advanced breeding lines was grown at 11 locations in Oregon, Washington, and Idaho. Mean yields acre at Moscow, Idaho. The overall mean was 1402 lbs. per acre. A University of Idaho breeding line

Brown, Jack

86

"Our Generation Had Nothing to Do with Discrimination": White Southern Memory of Jim Crow and Civil Rights  

E-Print Network (OSTI)

The ways in which white Americans understand the racial landscape and their own racial identities are not well understood. Through the lens of the racial past, in this study I investigate how memory operates within the white racial frame, the dominant white-centric worldview, to uphold systemic racism and to maintain whites collective and individual identities. Through a narrative analysis of original in-depth interviews conducted with 44 ordinary white southerners lifetime residents of Greensboro, North Carolina who lived through the legal segregation and civil rights eras, this research demonstrates the interviewees contemporary investment in positive notions of the white self and white society. The respondents' autobiographical narratives of life during legal segregation, a time of overt white supremacy, are typified by nostalgia for a childhood era of safety, security, and "good" race relations. Interviewees' narratives of the civil rights era, including nonviolent student sit-in protests for which Greensboro is known and school desegregation, have themes of disruption, danger, and white victimization. Overall, respondents portray Jim Crow segregation as a calm and peaceful time and the civil rights era as chaotic and harmful to whites, at the same time as they acknowledge, to a limited extent, the unfairness of Jim Crow's blatant racial inequalities. In this work I propose the concepts white victimology, white protectionism, and white moral identity. I argue that white victimology whites' perception, largely imagined, of their own racial victimization is a major ideological and emotional facet of the white racial frame, whereby whites dismiss the historical and contemporary reality of white racism. My analysis demonstrates that white victimology is a primary way in which whites assert themselves, individually and collectively, as racial innocents and "good" people. In this work I also conceptualize the dynamic of white protectionism, explanatory and rhetorical ways in which whites "rescue" white acquaintances and family members from potential accusations of racism. Ultimately, I argue that whites' investment in perpetuating white dominance and upholding the white racial frame occurs through white moral identity-making, myriad active and subtle ways that whites continue to construct themselves positively and construct people of color, especially black Americans, negatively.

Lavelle, Kristen Marie

2011-05-01T23:59:59.000Z

87

INEEL/EXT-97-  

NLE Websites -- All DOE Office Websites (Extended Search)

FreedomCAR & Vehicle Technologies Advanced Vehicle Testing Activity LOW-PERCENTAGE HYDROGENCNG BLEND FORD F-150 OPERATING SUMMARY Don Karner James Francfort January 2003 Idaho...

88

INEEL/EXT-97-  

NLE Websites -- All DOE Office Websites (Extended Search)

FreedomCAR & Vehicle Technologies Advanced Vehicle Testing Activity HIGH-PERCENTAGE HYDROGENCNG BLEND FORD F-150 OPERATING SUMMARY Don Karner James Francfort January 2003 Idaho...

89

INEEL/EXT-97-  

NLE Websites -- All DOE Office Websites (Extended Search)

1297 Advanced Vehicle Testing Activity THNK city - ELECTRIC VEHICLE DEMONSTRATION PROGRAM ANNUAL REPORT 2001 - 2002 James Francfort October 2002 Idaho National Engineering and...

90

untitled  

NLE Websites -- All DOE Office Websites (Extended Search)

and Plug-in Hybrid Electric Vehicle Testing Activities James Francfort US DOE's Advanced Vehicle Testing Activity (AVTA) Idaho National Laboratory (INL) 2 AVTA Background and Goal...

91

2012 Advanced Applications Research & Development Peer Review - Day 1  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2012 Advanced Applications Research & Development Peer Review - Day 2012 Advanced Applications Research & Development Peer Review - Day 1 Presentations 2012 Advanced Applications Research & Development Peer Review - Day 1 Presentations The Advanced Applications Research & Development Peer Review included seven sessions over 2 days on June 12 - 13, 2012. Presentations from Day 1 (Sessions I through V) are available below. Session I: Dan Trudnowski, Ning Zhou, Mani Venkatasubramanian Session II: Brett Amidan, Bharat Bhargava, Ning Zhou Session III: Ken Martin, Mani Venkatasubramanian Session IV: Jeff Dagle, Jim Dyer, Joe Gracia, Joe Eto Session V: Joe Eto 2012 Advanced Applications R&D Peer Review - Measurement-Based Stability Assessment - Dan Trudnowski, U Montana 2012 Advanced Applications R&D Peer Review - Mode Meter Development - Ning

92

2012 Advanced Applications Research & Development Peer Review - Day 1  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1 Presentations 1 Presentations 2012 Advanced Applications Research & Development Peer Review - Day 1 Presentations The Advanced Applications Research & Development Peer Review included seven sessions over 2 days on June 12 - 13, 2012. Presentations from Day 1 (Sessions I through V) are available below. Session I: Dan Trudnowski, Ning Zhou, Mani Venkatasubramanian Session II: Brett Amidan, Bharat Bhargava, Ning Zhou Session III: Ken Martin, Mani Venkatasubramanian Session IV: Jeff Dagle, Jim Dyer, Joe Gracia, Joe Eto Session V: Joe Eto 2012 Advanced Applications R&D Peer Review - Measurement-Based Stability Assessment - Dan Trudnowski, U Montana 2012 Advanced Applications R&D Peer Review - Mode Meter Development - Ning Zhou, PNNL 2012 Advanced Applications R&D Peer Review - Oscillation Monitoring System

93

JGI - Jim Bristow  

NLE Websites -- All DOE Office Websites (Extended Search)

Honors Magna Cum Laude, Harvard Medical School (1981); inaugural Fellow of the American Heart Association (2002); American Board of Pediatrics Cardiology Sub-board (2001-2008)....

94

Jim Evans Honorary Symposium  

Science Conference Proceedings (OSTI)

Control of environmental impact of materials production. Novel cells for ... Turbulent Condition Wireless Instrumentation of Aluminum Smelting Operatings ...

95

Calorimeter Electronics Jim Pilcher  

E-Print Network (OSTI)

photons to electrical signal Photons from Cerenkov radiation or scintillation Amplify the number diverse device Many sizes and shapes Much experience from years of usage and development Wide range. Pilcher9 The Physics of PMTs Design principle Amplification by electron acceleration in electric field

96

hydrogen pilot plant, H2ICE vehicle testing INL alternative energy vehicles  

NLE Websites -- All DOE Office Websites (Extended Search)

Hydrogen Pilot Plant, H2ICE Hydrogen Pilot Plant, H2ICE Vehicle Testing, & INL Alternative Energy Vehicles (Advanced Vehicle Testing Activity) Jim Francfort Discovery Center of Idaho - September 2005 INL/CON-05-00694 AVTA Presentation Outline * Arizona Public Service's Alternative Fuel (Hydrogen) Pilot Plant Design and Operations * Hydrogen internal combustion engine vehicle testing * Oil bypass filter system evaluation * Diesel engine idling testing * INL alternative fuel infrastructure * INL alternative fuel fleet * WWW information APS Alternative Fuel (Alt-Fuel) Pilot Plant - Partners * Arizona Public Service (APS) * Electric Transportation Applications (ETA) * Idaho National Laboratory (INL) * Started operations - 2002 Alt-Fuel Pilot Plant & Vehicle Testing - Objectives * Evaluate the safety & reliability of operating ICE

97

Holmberg - OpenADR Advances 20120920  

NLE Websites -- All DOE Office Websites (Extended Search)

5E 5E OpenADR Advances David G. Holmberg National Institute of Standards and Technology Girish Ghatikar Lawrence Berkeley National Laboratory Edward L. Koch Akuacom/Honeywell Jim Boch IPKeys Technologies November 2012 Published in ASHRAE Journal, v.54, issue 11 DISCLAIMER This document was prepared as an account of work sponsored by the United States Government. While this document is believed to contain correct information, neither the United States Government nor any agency thereof, nor The Regents of the University of California, n or a ny o f t heir e mployees, m akes a ny w arranty, e xpress o r i mplied, o r a ssumes any legal responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or

98

From: Adams, Charlie To: Regulatory.Review Cc: Stern, Jim; Parker, Mike; Dana, Paul; Josh Greene; Frank Stanonik; Neil Rolph; Schuh, Darrell; Roy Smith; Dan  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Adams, Charlie To: Regulatory.Review Cc: Stern, Jim; Parker, Mike; Dana, Paul; Josh Greene; Frank Stanonik; Neil Rolph; Schuh, Darrell; Roy Smith; Dan Snyder; Berning, Dave Subject: EO 13563 Preliminary Plan comments from A.O. Smith Corporation Date: Monday, August 01, 2011 2:59:51 PM A.O. Smith Corporation Response to Preliminary Plan for Retrospective Analysis of Existing Rules A.O. Smith Corporation is the largest manufacturer of residential and commercial water heating equipment in the United States. We have the following comments in response to the July 11, 2011, Notice of Availability in the Federal Register, in which DOE sought comments regarding its EO 13563 Preliminary Plan: · In general, we commend DOE's approach to review significant rules on an on-going basis in order

99

CERTS 2012 Program Review - NASPI Technical Support for OITT & Operations of NERC-TVA NASPI Synchrophasor Network & RTDMS Installation - Jim Dyer, EPG  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

SynchroPhasor Initiative SynchroPhasor Initiative (NASPI) Event Analysis Reports Jim Dyer dyer@ElectricPowerGroup.com June 12, 2012 Washington, DC DOE - CERTS Transmission Reliability R&D Internal Program Review Agenda  Technical Support for Operations of Real Time Dynamics Monitoring System (RTDMS) for NASPI  Support of the RTDMS Users' Group  Support of NASPI Operations Implementation Task Team (OITT) Page 1  Built upon GRID-3P Platform, U.S. Patent 7,233,843, and U.S. Patent 8,060259. All rights reserved. NASPI-RTDMS Support Page 2  Objective - Enhance, maintain and support the RTDMS application, server, data base and client. Support users needs and provide an application that converts phasor date into useful information

100

Microsoft PowerPoint - Clean Cities Web Presentation - Francfort...  

NLE Websites -- All DOE Office Websites (Extended Search)

off-board electricity source, mostly from power plants via the electric grid * Captures energy during regenerative braking: electric motor(s) acts as a generator * No...

Note: This page contains sample records for the topic "jim francfort advanced" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Microsoft PowerPoint - Francfort slides 1 - 20.ppt  

NLE Websites -- All DOE Office Websites (Extended Search)

and Environmental Laboratory APS Alternative Fuel Pilot Plant * Electrolytic hydrogen production on site, Proton Energy Systems' HOGEN PEM stationary fuel cell operating...

102

Microsoft PowerPoint - Francfort slides.ppt  

NLE Websites -- All DOE Office Websites (Extended Search)

- HydrogenCNG production and fueling Station - Hydrogen internal combustion engine (ICE) vehicle testing - Hybrid, urban, and neighborhood electric vehicle testing - Airport...

103

Microsoft PowerPoint - Francfort - 2011 Interfuels May meeting...  

NLE Websites -- All DOE Office Websites (Extended Search)

based U S Department of Energy (DOE) * Eastern Idaho based U.S. Department of Energy (DOE) Federal laboratory * 890 square mile site with 4,000 staff S t DOE' t t i l Bio-mass...

104

Microsoft PowerPoint - Francfort_EVRoadmap4.pptx  

NLE Websites -- All DOE Office Websites (Extended Search)

National Laboratory EV ROADMAP 4 World Trade Center, Portland, Oregon November 2 & 3, 2011 , This presentation does not contain any proprietary or sensitive information Idaho...

105

Microsoft PowerPoint - Francfort slides 1 - 20.ppt  

NLE Websites -- All DOE Office Websites (Extended Search)

CNG vehicles * 40 Light-duty LNG vehicles * 6 LNG motor coach buses * 5 Light-duty propane vehicles * LNGCNG station at "site" and CNG station 50+ miles distance in Idaho...

106

2012 Advanced Applications Research & Development Peer Review...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Session II: Brett Amidan, Bharat Bhargava, Ning Zhou Session III: Ken Martin, Mani Venkatasubramanian Session IV: Jeff Dagle, Jim Dyer, Joe Gracia, Joe Eto Session...

107

Advanced Materials  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Materials Advanced Materials Availability Technology Express Licensing Active Terahertz Metamaterial Devices Express Licensing Anion-Conducting Polymer, Composition, And...

108

DOE/EIS-0265-SA-168: Supplement Analysis for the Watershed Management Program EIS - Protect and Restore Lolo Creek Watershed - Jim Brown Creek Streambank Stabilization (08/10/04)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Supplement Analysis for the Watershed Management Program EIS (DOE/EIS-0265/SA-168) Sabrina Keen Fish and Wildlife Project Manager, KEWU-4 Proposed Action: Protect and Restore Lolo Creek Watershed - Jim Brown Creek Streambank Stabilization Project No: 1996-077-02 Wildlife Management Techniques or Actions Addressed Under This Supplement Analysis (See App. A of the Wildlife Mitigation Program EIS): 1.8 Bank Protection through Vegetation Management, 1.9 Structural Bank Protection using Bioengineering Methods Location: Clearwater County, Idaho Proposed by: Bonneville Power Administration (BPA) and the Nez Perce Tribe Description of the Proposed Action: The Bonneville Power Administration, Nez Perce Tribe, and Potlatch Corporation are proposing to stabilize streambanks along Jim Brown Creek near

109

Jim Brodrick | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

and Renewable Energy's Building Technologies Office. Most Recent Lighting the Way for Big Energy Savings in Los Angeles November 14 Keeping Pace with LED Lighting Trends October 23...

110

Jim Nelson, Camp Joy Gardens  

E-Print Network (OSTI)

trees and chickens and compost heaps and a little workshopKing of the Mountain on the compost pile one time, after welaughs] The true kings of the compost pile. Nelson: Yes, he

Rabkin, Sarah

2010-01-01T23:59:59.000Z

111

Jim Cochran: Swanton Berry Farm  

E-Print Network (OSTI)

were a couple people (Dale Coke was one, and a couple ofthe oral history with Dale Coke in this series. A watershed

Farmer, Ellen

2010-01-01T23:59:59.000Z

112

Advanced Gasification  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Gasification Carbon feedstock gasification is a promising pathway for high-efficiency, low-pollutant power generation and chemical production. The inability, however, to...

113

Advanced Ceramics  

Science Conference Proceedings (OSTI)

Table 3   Raw materials for advanced structural and magnetic (ferrite) ceramics...conductivity Wear resistance Oxygen sensors, fuel cells (potential), high-temperature

114

Advanced Manufacturing  

Science Conference Proceedings (OSTI)

... new metrologically-based methods for industry as well ... for Advanced Catalyst Development and Durability ... Electron-Beam Irradiation of Solar Cells. ...

2013-07-29T23:59:59.000Z

115

Advanced Materials  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Materials Advanced Materials Advanced Materials Express Licensing Active Terahertz Metamaterial Devices Express Licensing Anion-Conducting Polymer, Composition, And Membrane Express Licensing Analysis Of Macromolecule, Liggands And Macromolecule-Lingand Complexes Express Licensing Carbon Microtubes Express Licensing Chemical Synthesis Of Chiral Conducting Polymers Express Licensing Forming Adherent Coatings Using Plasma Processing Express Licensing Hydrogen Scavengers Express Licensing Laser Welding Of Fused Quartz Express Licensing Multiple Feed Powder Splitter Negotiable Licensing Boron-10 Neutron Detectors for Helium-3 Replacement Negotiable Licensing Insensitive Extrudable Explosive Negotiable Licensing Durable Fuel Cell Membrane Electrode Assembly (MEA) Express Licensing Method of Synthesis of Proton Conducting Materials

116

Advanced Ceramics  

Science Conference Proceedings (OSTI)

Table 2   Classification of advanced ceramics...solid electrolytes, piezoelectrics, dielectrics, superconductors Optical Low absorption coefficient Lamps, windows, fiber optics, infrared optics Nuclear Irradiation resistance, high absorption coefficient,

117

Advanced Manufacturing Office: Solicitations  

NLE Websites -- All DOE Office Websites (Extended Search)

Solicitations on Twitter Bookmark Advanced Manufacturing Office: Solicitations on Google Bookmark Advanced Manufacturing Office: Solicitations on Delicious Rank Advanced...

118

Advanced Manufacturing Office: Webcasts  

NLE Websites -- All DOE Office Websites (Extended Search)

Office: Webcasts on Twitter Bookmark Advanced Manufacturing Office: Webcasts on Google Bookmark Advanced Manufacturing Office: Webcasts on Delicious Rank Advanced...

119

Advanced Manufacturing Office: Subscribe  

NLE Websites -- All DOE Office Websites (Extended Search)

Office: Subscribe on Twitter Bookmark Advanced Manufacturing Office: Subscribe on Google Bookmark Advanced Manufacturing Office: Subscribe on Delicious Rank Advanced...

120

Advanced Manufacturing Office: Workshops  

NLE Websites -- All DOE Office Websites (Extended Search)

Office: Workshops on Twitter Bookmark Advanced Manufacturing Office: Workshops on Google Bookmark Advanced Manufacturing Office: Workshops on Delicious Rank Advanced...

Note: This page contains sample records for the topic "jim francfort advanced" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Advanced Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Systems: Advanced Systems: high Performance fenestration systems Research areas: Research activities to improve the performance of windows and other fenestration products must address window systems issues as well as Glazing Materials research. LBNL activities in the area of Advanced Systems include research at both the product level and the building envelope and building systems levels. Highly insulating windows - using non structural center layers Lower cost solutions to more insulating three layer glazing systems, with the potential to turn windows in U.S. heating dominated residential applications into net-energy gainers. Highly Insulating Window Frames In collaboration with the Norwegian University of Science and Technology, we are researching the potentials for highly insulating window frames. Our initial work examines European frames with reported U-factors under 0.15 Btu/hr-ft2-F. Future research aims to analyze these designs, verify these performance levels and ensure that procedures used to calculate frame performance are accurate.

122

Advanced Combustion  

NLE Websites -- All DOE Office Websites (Extended Search)

Systems Systems Advanced Combustion Background Conventional coal-fired power plants utilize steam turbines to generate electricity, which operate at efficiencies of 35-37 percent. Operation at higher temperatures and pressures can lead to higher efficiencies, resulting in reduced fuel consumption and lower greenhouse gas emissions. Higher efficiency also reduces CO2 production for the same amount of energy produced, thereby facilitating a reduction in greenhouse gas emissions. When combined, oxy-combustion comes with an efficiency hit, so it will actually increase the amount of CO2 to be captured. But without so much N2 in the flue gas, it will be easier and perhaps more efficient to capture, utilize and sequester. NETL's Advanced Combustion Project and members of the NETL-Regional University

123

Advanced Search  

NLE Websites -- All DOE Office Websites (Extended Search)

Publications Publications Advanced Search Most publications by Environmental Energy Technologies Division authors are searchable from this page, including peer-reviewed publications, book chapters, conference proceedings and LBNL reports. Filter Advanced Search Publications list This publications database is an ongoing project, and not all Division publications are represented here yet. For additional help see the bottom of this page. Documents Found: 4418 Title Keyword LBNL Number Author - Any - Abadie, Marc O Abbey, Chad Abdolrazaghi, Mohamad Aberg, Annika Abhyankar, Nikit Abraham, Marvin M Abshire, James B Abushakra, Bass Acevedo-Ruiz, Manuel Aceves, Salvador Ache, Hans J Ackerly, David D Ackerman, Andrew S Adamkiewicz, Gary Adams, J W Adams, Carl Adamson, Bo Addy, Nathan Addy, Susan E Aden, Nathaniel T Adesola, Bunmi Adhikari,

124

Advanced Combustion  

Science Conference Proceedings (OSTI)

The activity reported in this presentation is to provide the mechanical and physical property information needed to allow rational design, development and/or choice of alloys, manufacturing approaches, and environmental exposure and component life models to enable oxy-fuel combustion boilers to operate at Ultra-Supercritical (up to 650{degrees}C & between 22-30 MPa) and/or Advanced Ultra-Supercritical conditions (760{degrees}C & 35 MPa).

Holcomb, Gordon R. [NETL

2013-03-11T23:59:59.000Z

125

A Characteristics-Based Approach to Radioactive Waste Classification in Advanced Nuclear Fuel Cycles  

E-Print Network (OSTI)

LLW-?GTCC GTCC in NRC criteria. Vitrified glass; Matheson, Jim. Letter to NRC Chairman Dale E California Press, NRC 2008 Nuclear Regulatory

Djokic, Denia

2013-01-01T23:59:59.000Z

126

Advanced Energy Storage Publications  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Energy Storage Publications Reports: Advanced Technology Development Program For Lithium-Ion Batteries: Gen 2 Performance Evaluation Final Report Advanced Technology...

127

Advanced Manufacturing Office: News  

NLE Websites -- All DOE Office Websites (Extended Search)

Manufacturing Office: News on Twitter Bookmark Advanced Manufacturing Office: News on Google Bookmark Advanced Manufacturing Office: News on Delicious Rank Advanced Manufacturing...

128

Mission Advancing  

NLE Websites -- All DOE Office Websites (Extended Search)

NETL Accomplishments NETL Accomplishments - the lab 2 Mission Advancing energy options to fuel our economy, strengthen our security, and improve our environment. Renewed Prosperity Through Technological Innovation - Letter from the Director NETL: the ENERGY lab 4 6 3 Contents Technology Transfer Patents and Commercialization Sharing Our Expertise Noteworthy Publications 60 62 63 64 66 Environment, Economy, & Supply Carbon Capture and Storage Partnerships Work to Reduce Atmospheric CO 2 Demand-Side Efficiencies New NETL Facility Showcases Green Technologies Environment & Economy Materials Mercury Membranes NETL Education Program Produces Significant Achievement Monitoring Water Economy & Supply NETL's Natural Gas Prediction Tool Aids Hurricane Recovery Energy Infrastructure

129

Advanced Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Ductility EnhancEmEnt of molybDEnum Ductility EnhancEmEnt of molybDEnum PhasE by nano-sizED oxiDE DisPErsions Description Using computational modeling techniques, this research aims to develop predictive capabilities to facilitate the design and optimization of molybdenum (Mo), chromium (Cr), and other high-temperature structural materials to enable these materials to withstand the harsh environments of advanced power generation systems, such as gasification-based systems. These types of materials are essential to the development of highly efficient, clean energy technologies such as low-emission power systems that use coal or other fossil fuels.

130

Advanced Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Super HigH-TemperaTure alloyS and Super HigH-TemperaTure alloyS and CompoSiTeS From nb-W-Cr SySTemS Description The U.S. Department of Energy's Office of Fossil Energy (DOE-FE) has awarded a three-year grant to the University of Texas at El Paso (UTEP) and Argonne National Laboratory (ANL) to jointly explore the high-temperature properties of alloys composed of niobium (Nb), tungsten (W), and chromium (Cr). The grant is administered by the Advanced Research (AR) program of the National

131

Advanced Research  

NLE Websites -- All DOE Office Websites (Extended Search)

05/2007 05/2007 NitrogeN evolutioN aNd CorrosioN MeChaNisMs With oxyCoMbustioN of Coal Description Under a grant from the University Coal Research (UCR) program, Brigham Young University (BYU) is leading a three-year research effort to investigate the physical processes that several common types of coal undergo during oxy-fuel combustion. Specifically, research addresses the mixture of gases emitted from burning, particularly such pollutants as nitrogen oxides (NO X ) and carbon dioxide (CO 2 ), and the potential for corrosion at the various stages of combustion. The UCR program is administered by the Advanced Research Program at the National Energy Technology Laboratory (NETL), under the U.S. Department of Energy's Office of

132

Microsoft PowerPoint - Francfort AVTA-INL EDVs - The Networked...  

NLE Websites -- All DOE Office Websites (Extended Search)

mile average trip distance * 5.3 mph average speed g * 32.2 average stops per mile * 15% regenerative braking energy recovery - All trips 1 43 AC DC Whmi ratio 668 AC Whmi...

133

Microsoft PowerPoint - INL-Francfort - Clean Cities Wedinar Charging...  

NLE Websites -- All DOE Office Websites (Extended Search)

and certification Safety standards and certification * Charging definitions * EVSE (electric vehicle supply equipment) examples ( pp y q p ) p * Installation requirements *...

134

Microsoft PowerPoint - Francfort Maui Energy Expo Sept 2009.ppt  

NLE Websites -- All DOE Office Websites (Extended Search)

- Provide benchmark data to technology modelers, research and development programs, vehicle manufacturers (via VSATT), and target and goal setters - Assist fleet managers in...

135

Microsoft PowerPoint - Francfort G100 - SAE Govt-Industry Jan...  

NLE Websites -- All DOE Office Websites (Extended Search)

- Provide benchmark data to technology modelers, research and development programs, vehicle manufacturers (via VSATT), and target and goal setters - Assist fleet managers in...

136

Microsoft PowerPoint - Francfort ECO CP combined - WH Data Jam...  

NLE Websites -- All DOE Office Websites (Extended Search)

PNNL), Federal Agencies (DOD, DOI, DOT, EPA, USPS), technology modelers, R&D programs, vehicle manufacturers (via USCAR's VSATT, EESTT, GITT), and target and goal setters ), g g...

137

Microsoft PowerPoint - Francfort PEVs n EV Project CC Webinar...  

NLE Websites -- All DOE Office Websites (Extended Search)

Provide benchmark data to DOE, technology modelers, gy research and development programs, vehicle manufacturers (via VSATT), and target and goal setters - Assist fleet managers,...

138

Microsoft PowerPoint - Francfort Project Get Ready Jan 2012.pptx  

NLE Websites -- All DOE Office Websites (Extended Search)

- Provide benchmark data to technology modelers, research and development programs, vehicle manufacturers (via VSATT), and target and goal setters - Assist fleet managers in...

139

Microsoft PowerPoint - Francfort AVTA-INL EDVs - IWC Tempe Dec...  

NLE Websites -- All DOE Office Websites (Extended Search)

based U S Department of Energy (DOE) * Eastern Idaho based U.S. Department of Energy (DOE) Federal laboratory * 890 square mile site with 4,000 staff S t DOE' t t i l Bio-mass...

140

II.AdvancedTcl Advanced Tcl  

E-Print Network (OSTI)

119 P A R T II.AdvancedTcl II Advanced Tcl Part II describes advanced programming techniques that support sophisticated applications. The Tcl interfaces remain simple, so you can quickly construct pow- erful applications. Chapter 10 describes eval, which lets you create Tcl programs on the fly

Chen, Yuanzhu Peter

Note: This page contains sample records for the topic "jim francfort advanced" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Alternative and Advanced Fuels  

Energy.gov (U.S. Department of Energy (DOE))

There are a variety of alternative and advanced fuels available, which are used to fuel alternative and advanced vehicles. Learn more about:

142

Help - Advanced Search  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Search The advanced search form will help you create a more specific search in the Publications database. First, specify your search criteria. You can search by author,...

143

Advanced Materials in MML  

Science Conference Proceedings (OSTI)

... Advanced Materials Characterization. Fusion Wall Development Research by Neutron Depth Profiling. < Previous 1 2 3 Next . ...

2012-06-12T23:59:59.000Z

144

APS ALternative Fuel (Hydrogen) Pilot Plant Monitoring System  

NLE Websites -- All DOE Office Websites (Extended Search)

502 502 U.S. Department of Energy FreedomCAR & Vehicle Technologies Program Advanced Vehicle Testing Activity APS Alternative Fuel (Hydrogen) Pilot Plant Monitoring System Dimitri Hochard James Francfort July 2005 Idaho National Laboratory Operated by Battelle Energy Alliance INL/EXT-05-00502 U.S. Department of Energy FreedomCAR & Vehicle Technologies Program Advanced Vehicle Testing Activity APS Alternative Fuel (Hydrogen) Pilot Plant Monitoring System Dimitri Hochard a James Francfort b July 2005 Idaho National Laboratory Transportation Technology Department Idaho Falls, Idaho 83415 Prepared for the U.S. Department of Energy Assistant Secretary for Energy Efficiency and Renewable Energy Under DOE Idaho Operations Office

145

Nuclear fusion advances  

Science Conference Proceedings (OSTI)

The last decade has seen advances in the shaping and confinement of plasmas, and in approaches to noninductive current drive. Here, the author presents an overview of nuclear fusion advances between 1983-93 examining: fusion milestones; plasma shaping; ...

W. Sweet

1994-02-01T23:59:59.000Z

146

AdvAnced  

NLE Websites -- All DOE Office Websites (Extended Search)

AdvAnced test reActor At the InL advanced Unlike large, commercial power reactors, ATR is a low- temperature, low-pressure reactor. A nuclear reactor is basically an elaborate tool...

147

ADVANCED DATA SECURITY  

Science Conference Proceedings (OSTI)

ADVANCED DATA SECURITY. NVLAP Lab Code: 200968-0. Address and Contact Information: 1933 O'Toole Avenue San ...

2013-11-08T23:59:59.000Z

148

Fatigue of Advanced Materials  

Science Conference Proceedings (OSTI)

Oct 19, 2011... isolate the internal components from the external environment while ... overall thermal efficiency of advanced internal combustion engines...

149

Advancement of Electrochromic Windows  

E-Print Network (OSTI)

advanced spectrally selective low-e double-pane windows and the same type of daylighting control system

2006-01-01T23:59:59.000Z

150

Advanced High Frequency Devices  

Science Conference Proceedings (OSTI)

... External agencies, including the Defense Advanced Research Projects Agency (DARPA) and the Office of Naval Research (ONR), have ...

2010-10-05T23:59:59.000Z

151

Supporting Advanced Communications Networks  

Science Conference Proceedings (OSTI)

... it will rely on revolutionary advances in network architecture. ... telemedicine), sensor and control networks (eg, Smart Grid, environmental monitoring ...

2012-02-13T23:59:59.000Z

152

Advanced Manufacturing Office: Better Plants  

NLE Websites -- All DOE Office Websites (Extended Search)

Better Plants on Twitter Bookmark Advanced Manufacturing Office: Better Plants on Google Bookmark Advanced Manufacturing Office: Better Plants on Delicious Rank Advanced...

153

Advanced Manufacturing Office: Pump Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Pump Systems on Twitter Bookmark Advanced Manufacturing Office: Pump Systems on Google Bookmark Advanced Manufacturing Office: Pump Systems on Delicious Rank Advanced...

154

Session: CSP Advanced Systems -- Advanced Overview (Presentation)  

DOE Green Energy (OSTI)

The project description is: (1) it supports crosscutting activities, e.g. advanced optical materials, that aren't tied to a single CSP technology and (2) it supports the 'incubation' of new concepts in preliminary stages of investigation.

Mehos, M.

2008-04-01T23:59:59.000Z

155

Hydrogen Station & ICE Vehicle Operations and Testing  

NLE Websites -- All DOE Office Websites (Extended Search)

Hydrogen Station & ICE Vehicle Operations and Testing Jim Francfort for Lee Slezak WestStart CALSTART Hydrogen Internal Combustion Engine Symposium - February 2006 INL/CON-06-01109 Presentation Outline * Background and Goal * Arizona Public Service (APS) Alternative Fuel (Hydrogen) Pilot Plant - design and operations * Fuel Dispensing * Prototype Dispenser Testing * Hydrogen and HCNG Internal Combustion Engine (ICE) Vehicle Testing Activities * WWW Information AVTA Background and Goal * AVTA is part of the U.S. Department of Energy's FreedomCAR and Vehicle Technologies Program * These activities are conducted by the Idaho National Laboratory (INL) and the AVTA testing partner Electric Transportation Applications * AVTA Goal - Provide benchmark data for technology

156

Advanced Manufacturing Office: Technical Assistance  

NLE Websites -- All DOE Office Websites (Extended Search)

Assistance on Twitter Bookmark Advanced Manufacturing Office: Technical Assistance on Google Bookmark Advanced Manufacturing Office: Technical Assistance on Delicious Rank...

157

Advanced Manufacturing Office: Financial Opportunities  

NLE Websites -- All DOE Office Websites (Extended Search)

on Twitter Bookmark Advanced Manufacturing Office: Financial Opportunities on Google Bookmark Advanced Manufacturing Office: Financial Opportunities on Delicious Rank...

158

Advanced Concepts Breakout Group  

NLE Websites -- All DOE Office Websites (Extended Search)

Workshop Workshop Advanced Concepts Working Group Facilitator: John J. Petrovic Scribe: Sherry Marin Advanced Storage Techniques/ Approaches in Priority Order 1. Crystalline Nanoporous Materials (15) 2. Polymer Microspheres (12) Self-Assembled Nanocomposites (12) 3. Advanced Hydrides (11) Metals - Organic (11) 4. BN Nanotubes (5) Hydrogenated Amorphous Carbon (5) 5. Mesoporous materials (4) Bulk Amorphous Materials (BAMs) (4) 6. Iron Hydrolysis (3) 7. Nanosize powders (2) 8. Metallic Hydrogen (1) Hydride Alcoholysis (1) Overarching R&D Questions for All Advanced Materials * Maximum storage capacity - theoretical model * Energy balance / life cycle analysis * Hydrogen absorption / desorption kinetics * Preliminary cost analysis - potential for low cost, high

159

Institute for Advanced Studies  

NLE Websites -- All DOE Office Websites (Extended Search)

Institute for Advanced Studies Institute for Advanced Studies Institute for Advanced Studies NMC leverages the strengths of three research universities to build joint programs, develop strategic partnerships, provide common organization and facilities. Contact Leader TBD LANL Program Administrator Pam Hundley (505) 663-5453 Email Building regional partnerships in education, leveraging strengths of three research universities The Institute for Advanced Studies (IAS) works with the three New Mexico research universities (University of New Mexico, New Mexico Tech, and New Mexico State University) to develop research and educational collaborations and partnerships. To facilitate interactions between the universities and LANL, the three New Mexico schools established the New Mexico Consortium (NMC), a nonprofit

160

Advanced Materials | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Research Areas Research Areas Research Highlights Facilities and Capabilities Science to Energy Solutions News & Awards Events and Conferences Supporting Organizations Directionally Solidified Materials Using high-temperature optical floating zone furnace to produce monocrystalline molybdenum alloy micro-pillars Home | Science & Discovery | Advanced Materials Advanced Materials | Advanced Materials SHARE ORNL has the nation's most comprehensive materials research program and is a world leader in research that supports the development of advanced materials for energy generation, storage, and use. We have core strengths in three main areas: materials synthesis, characterization, and theory. In other words, we discover and make new materials, we study their structure,

Note: This page contains sample records for the topic "jim francfort advanced" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Advanced Research Materials Program  

NLE Websites -- All DOE Office Websites (Extended Search)

materials requirements for all fossil energy systems, including materials for advanced power generation and coal fuels technologies. Examples of these technologies include coal...

162

Project: Advanced Fire Detection  

Science Conference Proceedings (OSTI)

... residential fire deaths through development of measurement ... Beyond advances in sensing technologies, a key ... data will be used to develop and test ...

2013-05-30T23:59:59.000Z

163

advance meeting brochure  

Science Conference Proceedings (OSTI)

May 23, 1999 ... Ponte Vedra Beach, Florida, USA. ADVANCE PROGRAM ..... but she has two enclosed glass-sided decks, an out- side balcony and the...

164

Brochures | Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

Podcasts Image Gallery external site Video Library Syndicated Feeds (RSS) The Advanced Photon Source: Lighting the Way to a Better Tomorrow aps brochure The APS helps...

165

Divisions | Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

Chart Argonne Research Divisions APS Research Divisions In May 2002, The Advanced Photon Source was reorganized into three divisions: the Accelerator Systems Division...

166

Advanced Mixing Models  

Propose mixing indicators. Turbulence kinetic energy ... (Turbulence intensity observed at Point 8 in Tank B & C) Advanced Mixing Models. Computational Sciences. 13.

167

Advancement in Battery Materials  

Science Conference Proceedings (OSTI)

Oct 18, 2010 ... Advanced Electrochemical Storage for Renewable Integration and Utility Applications: Zhenguo "Gary" Yang1; Dawon Choi1; Gordon Graff1;...

168

OpenADR Advances  

NLE Websites -- All DOE Office Websites (Extended Search)

Volume 54 Issue 11 Date Published 112012 Keywords communication and standards, openadr, smart grid Abstract An important goal for the advancement of smart grid deployments is to...

169

DOE Advanced Protection Project  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Task 3 - Advanced Protection - Evaluate measures - 2009 - Design, model Irvine Smart Grid Demo protection system - 2010 6 Copyright 2010, Southern California Edison Task 1 -...

170

Kansas Advanced Semiconductor Project  

SciTech Connect

KASP (Kansas Advanced Semiconductor Project) completed the new Layer 0 upgrade for D0, assumed key electronics projects for the US CMS project, finished important new physics measurements with the D0 experiment at Fermilab, made substantial contributions to detector studies for the proposed e+e- international linear collider (ILC), and advanced key initiatives in non-accelerator-based neutrino physics.

Baringer, P.; Bean, A.; Bolton, T.; Horton-Smith, G.; Maravin, Y.; Ratra, B.; Stanton, N.; von Toerne, E.; Wilson, G.

2007-09-21T23:59:59.000Z

171

Advanced Windows Test Facility  

NLE Websites -- All DOE Office Websites (Extended Search)

Exterior of Advanced Windows Test Facility Exterior of Advanced Windows Test Facility Advanced Windows Test Facility This multi-room laboratory's purpose is to test the performance and properties of advanced windows and window systems such as electrochromic windows, and automatically controlled shutters and blinds. The lab simulates real-world office spaces. Embedded instrumentation throughout the lab records solar gains and losses for specified time periods, weather conditions, energy use, and human comfort indicators. Electrochromic glazings promise to be a major advance in energy-efficient window technology, helping to achieve the goal of transforming windows and skylights from an energy liability in buildings to an energy source. The glazing can be reversibly switched from a clear to a transparent, colored

172

Advanced Fuels Synthesis  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Fuels Synthesis Advanced Fuels Synthesis Coal and Coal/Biomass to Liquids Advanced Fuels Synthesis The Advanced Fuels Synthesis Key Technology is focused on catalyst and reactor optimization for producing liquid hydrocarbon fuels from coal/biomass mixtures, supports the development and demonstration of advanced separation technologies, and sponsors research on novel technologies to convert coal/biomass to liquid fuels. Active projects within the program portfolio include the following: Fischer-Tropsch fuels synthesis Small Scale Coal Biomass Liquids Production Using Highly Selective Fischer Tropsch Catalyst Small Scale Pilot Plant for the Gasification of Coal and Coal/Biomass Blends and Conversion of Derived Syngas to Liquid Fuels Via Fischer-Tropsch Synthesis Coal Fuels Alliance: Design and Construction of Early Lead Mini Fischer-Tropsch Refinery

173

NETL: Advanced Research  

NLE Websites -- All DOE Office Websites (Extended Search)

AR AR Coal and Power Systems Advanced Research 12.11.13: Request for Information entitled "Novel Crosscutting Research and Development to Support Advanced Energy Systems". Application due date is January 15, 2014. The RFI and/or instructions can be found on the FedConnect site at FedConnect. Achieving Successes in High Performance Materials, Coal Utilization Sciences, Sensors & Controls Innovations, Computational Energy Sciences, Cooperative Research and Development, and sponsoring Education Initiatives. The Advanced Research (AR) program within NETL's Office of Coal and Power Systems fosters the development of innovative, cost-effective technologies for improving the efficiency and environmental performance of advanced coal and power systems. In addition, AR bridges the gap between fundamental

174

Advanced Chlorophyll Fluorometer  

To advance miniaturization of the AquaSentinel environmental monitoring technology, ORNL and the University of Tennessee researchers developed a microfluidics-based pulse amplitude modulation (PAM) chlorophyll fluorometerthe first of its ...

175

Advancement of Electrochromic Windows  

E-Print Network (OSTI)

Research Energy Systems Integration Advancement ofintegration issues related to using EC windows within a whole building energy efficient systemenergy- savings benefit with EC-daylighting-HVAC integration (assuming a conventional VAV system

2006-01-01T23:59:59.000Z

176

Advanced Cathode Catalysts  

NLE Websites -- All DOE Office Websites (Extended Search)

Fuel Cell Research 1 HFCIT Program Kick-off Meeting, Arlington, VA, February 13-14, 2007 Program Kick-off Meeting Arlington, Virginia, February 13-14, 2007 Advanced Cathode...

177

Search Asia Advanced Search  

E-Print Network (OSTI)

Asia Times Search Asia Times Advanced Search Southeast Asia Malaysia tackles illegal logging:52:14 AM Search #12;Asia Times illegal logging," he said, adding that nine Malaysians had been arrested

178

Search Asia Advanced Search  

E-Print Network (OSTI)

Asia Times Search Asia Times Advanced Search Southeast Asia Indonesia looks to curb log smuggling.html (1 of 2)9/4/2007 12:59:34 PM Search #12;Asia Times No material from Asia Times Online may

179

About | Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

the APS Welcome to the Advanced Photon Source Here you will find an introduction and tour of the facility, as well as information about the organizations and opportunities at...

180

Nanostructured Materials for Advanced  

E-Print Network (OSTI)

of electric vehicles (EVs) and hybrid electric vehicles (HEVs). High energy and high power densitiesT Nanostructured Materials for Advanced Li-Ion Rechargeable Batteries THE RECENT INCREASE IN demand

Cao, Guozhong

Note: This page contains sample records for the topic "jim francfort advanced" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Advanced Distribution Monitoring  

Science Conference Proceedings (OSTI)

Advanced Distribution Automation (ADA) is a concept for a fully controllable and flexible distribution system that will facilitate the exchange of electrical energy AND information between participants and system components. Advances in the monitoring of system parameters like voltages, currents and breaker/switch positions as well as environmental variables like temperature and wind speed will be required in order to fully implement ADA. This report presents background information on distribution monito...

2005-12-05T23:59:59.000Z

182

Advanced drilling systems study  

DOE Green Energy (OSTI)

This work was initiated as part of the National Advanced Drilling and Excavation Technologies (NADET) Program. It is being performed through joint finding from the Department of Energy Geothermal Division and the Natural Gas Technology Branch, Morgantown Energy Technology Center. Interest in advanced drilling systems is high. The Geothermal Division of the Department of Energy has initiated a multi-year effort in the development of advanced drilling systems; the National Research Council completed a study of drilling and excavation technologies last year; and the MIT Energy Laboratory recently submitted a proposal for a national initiative in advanced drilling and excavation research. The primary reasons for this interest are financial. Worldwide expenditures on oil and gas drilling approach $75 billion per year. Also, drilling and well completion account for 25% to 50% of the cost of producing electricity from geothermal energy. There is incentive to search for methods to reduce the cost of drilling. Work on ideas to improve or replace rotary drilling technology dates back at least to the 1930`s. There was a significant amount of work in this area in the 1960`s and 1970`s; and there has been some continued effort through the 1980`s. Undoubtedly there are concepts for advanced drilling systems that have yet to be studied; however, it is almost certain that new efforts to initiate work on advanced drilling systems will build on an idea or a variation of an idea that has already been investigated. Therefore, a review of previous efforts coupled with a characterization of viable advanced drilling systems and the current state of technology as it applies to those systems provide the basis for the current study of advanced drilling.

Pierce, K.G. [Sandia National Labs., Albuquerque, NM (United States); Livesay, B.J. [Livesay Consultants, San Diego, CA (United States)

1995-03-01T23:59:59.000Z

183

NETL: Advanced NOx Emissions Control  

NLE Websites -- All DOE Office Websites (Extended Search)

Home > Technologies > Coal & Power Systems > Innovations for Existing Plants > Advanced NOx Emissions Control Innovations for Existing Plants Advanced NOx Emissions Control Adv....

184

Advance Electronics | Open Energy Information  

Open Energy Info (EERE)

Advance Electronics Jump to: navigation, search Name Advance Electronics Place United Kingdom Zip LL14 3YR Product Develop and deliver power conditioners, transient suppressors,...

185

Advanced Vehicle Technologies Awards | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Advanced Vehicle Technologies Awards Advanced Vehicle Technologies Awards Microsoft Word - VTP 175 Advanced Vehicle Tech project descriptions draft v5 8-2-11 AdvancedVehiclesTechn...

186

CS4353 Course Outline Advanced Graphics ?  

E-Print Network (OSTI)

Introduce advanced interactive computer graphics concepts Introduce advanced architecture of computer graphics devices Introduce advanced mathematical representation of graphic images Develop advanced graphics programming skills

Instructor John; E. Howl

2009-01-01T23:59:59.000Z

187

NETL: Advanced Research - Successes  

NLE Websites -- All DOE Office Websites (Extended Search)

Successes Successes Advanced Research Successes Sensors & Controls "...Optical grade single-crystal sapphire optical fiber waveguides are especially attractive for fabricating sensors for the harsh high-temperature, corrosive environments found in gasifiers." Read More... "Industry adoption of CCADS will open the door to a new generation of more efficient, ultra-low emission turbines in advanced energy systems" Read More... Bioprocessing " Successful development and commercial application of this environmentally safe bacterial toxin will allow power plants to reduce or eliminate the use of chlorination, reducing the risk of harmful effects on aquatic ecosystems." Advanced Materials " This project will benefit gasification technology development and deployment by improving materials to contain and monitor gasification processes." Read More...

188

Geothermal: Advanced Search  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Search Advanced Search Geothermal Technologies Legacy Collection Help/FAQ | Site Map | Contact Us | Admin Log On Home/Basic Search About Publications Advanced Search New Hot Docs News Related Links You may need to turn on Javascript in your browser to use the Find Subject and Find Author features. Sort By: Relevance Publication Date System Entry Date Document Type Title Research Org Sponsoring Org OSTI Identifier Report Number DOE Contract Number Ascending Descending Enter search criteria into as few or as many fields as desired. Search In For Term(s) (Place phrase in "double quotes") All Fields: Bibliographic Data: Full Text: Creator/Author Select : Title: Subject Select : Identifier Numbers: Journal Info.: Conference Info.: Patent Info.: Research Org.: Sponsoring Org.:

189

NIST's Advanced Technology Program  

NLE Websites -- All DOE Office Websites (Extended Search)

NIST's Advanced NIST's Advanced Technology Program NIST's Advanced Technology Program DOE Workshop on Hydrogen Separation and Purification Technologies Arlington, VA, Sept. 8-9, 2004 Jason Huang 301-975-4197 National Institute of Standards and Technology 100 Bureau Drive Stop 4730 Gaithersburg, MD 20899-4730 http://www.atp.nist.gov National Institute of Standards and Technology * Technology Administration * U.S. Department of Commerce ATP is part of NIST Helping America Measure Up NIST Mission ATP is part of NIST NIST Mission: Strengthen the U.S. economy and improve the quality of life by working with industry to develop and apply technology, measurements, and standards. * * * * * * 3,000 employees $771 million annual budget 2,000 field agents 1,800 guest researchers $2.2 billion co-funding of

190

Advanced Hydride Laboratory  

DOE Green Energy (OSTI)

Metal hydrides have been used at the Savannah River Tritium Facilities since 1984. However, the most extensive application of metal hydride technology at the Savannah River Site is being planned for the Replacement Tritium Facility, a $140 million facility schedules for completion in 1990 and startup in 1991. In the new facility, metal hydride technology will be used to store, separate, isotopically purify, pump, and compress hydrogen isotopes. In support of the Replacement Tritium Facility, a $3.2 million, cold,'' process demonstration facility, the Advanced Hydride Laboratory began operation in November of 1987. The purpose of the Advanced Hydride Laboratory is to demonstrate the Replacement Tritium Facility's metal hydride technology by integrating the various unit operations into an overall process. This paper will describe the Advanced Hydride Laboratory, its role and its impact on the application of metal hydride technology to tritium handling.

Motyka, T.

1989-01-01T23:59:59.000Z

191

Advanced fuel chemistry for advanced engines.  

SciTech Connect

Autoignition chemistry is central to predictive modeling of many advanced engine designs that combine high efficiency and low inherent pollutant emissions. This chemistry, and especially its pressure dependence, is poorly known for fuels derived from heavy petroleum and for biofuels, both of which are becoming increasingly prominent in the nation's fuel stream. We have investigated the pressure dependence of key ignition reactions for a series of molecules representative of non-traditional and alternative fuels. These investigations combined experimental characterization of hydroxyl radical production in well-controlled photolytically initiated oxidation and a hybrid modeling strategy that linked detailed quantum chemistry and computational kinetics of critical reactions with rate-equation models of the global chemical system. Comprehensive mechanisms for autoignition generally ignore the pressure dependence of branching fractions in the important alkyl + O{sub 2} reaction systems; however we have demonstrated that pressure-dependent 'formally direct' pathways persist at in-cylinder pressures.

Taatjes, Craig A.; Jusinski, Leonard E.; Zador, Judit; Fernandes, Ravi X.; Miller, James A.

2009-09-01T23:59:59.000Z

192

Advanced Simulation and Computing  

National Nuclear Security Administration (NNSA)

NA-ASC-117R-09-Vol.1-Rev.0 NA-ASC-117R-09-Vol.1-Rev.0 Advanced Simulation and Computing PROGRAM PLAN FY09 October 2008 ASC Focal Point Robert Meisner, Director DOE/NNSA NA-121.2 202-586-0908 Program Plan Focal Point for NA-121.2 Njema Frazier DOE/NNSA NA-121.2 202-586-5789 A Publication of the Office of Advanced Simulation & Computing, NNSA Defense Programs i Contents Executive Summary ----------------------------------------------------------------------------------------------- 1 I. Introduction -------------------------------------------------------------------------------------------------------- 2 Realizing the Vision ------------------------------------------------------------------------------------------------- 2 The Future of the Nuclear Weapons Complex ---------------------------------------------------------------- 2

193

Advanced Containment System  

SciTech Connect

An advanced containment system for containing buried waste and associated leachate. The advanced containment system comprises a plurality of casing sections with each casing section interlocked to an adjacent casing section. Each casing section includes a complementary interlocking structure that interlocks with the complementary interlocking structure on an adjacent casing section. A barrier filler substantially fills the casing sections and may substantially fill the spaces of the complementary interlocking structure to form a substantially impermeable barrier. Some of the casing sections may include sensors so that the casing sections and the zone of interest may be remotely monitored after the casing sections are emplaced in the ground.

Kostelnik, Kevin M. (Idaho Falls, ID); Kawamura, Hideki (Tokyo, JP); Richardson, John G. (Idaho Falls, ID); Noda, Masaru (Tokyo, JP)

2005-02-08T23:59:59.000Z

194

Advanced Monitoring systems initiative  

SciTech Connect

The Advanced Monitoring Systems Initiative (AMSI) actively searches for promising technologies and aggressively moves them from the research bench into DOE/NNSA end-user applications. There is a large unfulfilled need for an active element that reaches out to identify and recruit emerging sensor technologies into the test and evaluation function. Sensor research is ubiquitous, with the seeds of many novel concepts originating in the university systems, but at present these novel concepts do not move quickly and efficiently into real test environments. AMSI is a widely recognized, self-sustaining ''business'' accelerating the selection, development, testing, evaluation, and deployment of advanced monitoring systems and components.

R.J. Venedam; E.O. Hohman; C.F. Lohrstorfer; S.J. Weeks; J.B. Jones; W.J. Haas

2004-09-30T23:59:59.000Z

195

Advanced Coal Wind Hybrid: Economic Analysis  

E-Print Network (OSTI)

feasibility of combining wind farms with advanced coalfeasibility of combining wind farms with advanced coal

Phadke, Amol

2008-01-01T23:59:59.000Z

196

Advanced turbine systems program  

SciTech Connect

In accordance with the goals of the DOE program, improvements in the gas turbine are the primary focus of Allison activity during Phase I. To this end Allison conducted a survey of potentially applicable gas turbine cycles and selected the advanced combined cycle as reference system. Extensive analysis of two versions of the advanced combined cycle was performed against the requirement for a 60% thermal efficiency (LHV) utility-sized, natural gas fired system. This analysis resulted in technology requirements for this system. Additional analysis determined emissions potential for the system, established a coal-fueled derivative system and a commercialization plan. This report deals with the technical requirements for a system that meets the thermal efficiency goal. Allison initially investigated four basic thermodynamic cycles: Humid air turbine, intercalate-recuperated systems, advanced combined cycle, chemically recuperated cycle. Our survey and cycle analysis indicated that au had the potential of reaching 60% thermal efficiency. We also concluded that engine hot section technology would be a critical technology regardless of which cycle was chosen. Based on this result Allison chose to concentrate on the advanced combined cycle. This cycle is well known and understood by the utility turbine user community and is therefore likely to be acceptable to users.

Wilkes, C.; Mukavetz, D.W.; Knickerbocker, T.K.; Ali, S.A.

1992-12-31T23:59:59.000Z

197

Advanced turbine systems program  

SciTech Connect

In accordance with the goals of the DOE program, improvements in the gas turbine are the primary focus of Allison activity during Phase I. To this end Allison conducted a survey of potentially applicable gas turbine cycles and selected the advanced combined cycle as reference system. Extensive analysis of two versions of the advanced combined cycle was performed against the requirement for a 60% thermal efficiency (LHV) utility-sized, natural gas fired system. This analysis resulted in technology requirements for this system. Additional analysis determined emissions potential for the system, established a coal-fueled derivative system and a commercialization plan. This report deals with the technical requirements for a system that meets the thermal efficiency goal. Allison initially investigated four basic thermodynamic cycles: Humid air turbine, intercalate-recuperated systems, advanced combined cycle, chemically recuperated cycle. Our survey and cycle analysis indicated that au had the potential of reaching 60% thermal efficiency. We also concluded that engine hot section technology would be a critical technology regardless of which cycle was chosen. Based on this result Allison chose to concentrate on the advanced combined cycle. This cycle is well known and understood by the utility turbine user community and is therefore likely to be acceptable to users.

Wilkes, C.; Mukavetz, D.W.; Knickerbocker, T.K.; Ali, S.A.

1992-01-01T23:59:59.000Z

198

Advanced fossil energy utilization  

Science Conference Proceedings (OSTI)

This special issue of Fuel is a selection of papers presented at the symposium Advanced Fossil Energy Utilization co-sponsored by the Fuels and Petrochemicals Division and Research and New Technology Committee in the 2009 American Institute of Chemical Engineers (AIChE) Spring National Meeting Tampa, FL, on April 2630, 2009.

Shekhawat, D.; Berry, D.; Spivey, J.; Pennline, H.; Granite, E.

2010-01-01T23:59:59.000Z

199

Advanced Vehicle Testing Activity: Overview  

NLE Websites -- All DOE Office Websites (Extended Search)

Overview to Overview to someone by E-mail Share Advanced Vehicle Testing Activity: Overview on Facebook Tweet about Advanced Vehicle Testing Activity: Overview on Twitter Bookmark Advanced Vehicle Testing Activity: Overview on Google Bookmark Advanced Vehicle Testing Activity: Overview on Delicious Rank Advanced Vehicle Testing Activity: Overview on Digg Find More places to share Advanced Vehicle Testing Activity: Overview on AddThis.com... Home Overview Light-Duty Vehicles Medium- and Heavy-Duty Vehicles Publications Overview The marketplace for advanced transportation technologies and the focus, direction, and funding of transportation programs are continually changing. The Advanced Vehicle Testing Activity's "2005 Overview of Advanced Technology Transportation" (PDF 736 KB) gives the latest information about

200

Posters | Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

Your Cart (0 Posters) Your Cart (0 Posters) Your cart is empty. checkout Subtotal: $0.00 update empty Posters Order a printed APS poster! 11 in. x 17 in. prints will be mailed in the order requests are received. 36 in. x 36 in. posters will be sent to school addresses once all orders are processed. The Advanced Photon Source Is The Advanced Photon Source Is Qty: 1 add to cart Technologies from Materials Science Technologies from Materials Science Qty: 1 add to cart Materials Under Extreme Pressure Materials Under Extreme Pressure Qty: 1 add to cart Biological Macromolecules in Action Biological Macromolecules in Action Qty: 1 add to cart Journey to the Center of the Earth Journey to the Center of the Earth Qty: 1 add to cart Earthshaking Monitor Earthshaking Monitor Qty: 1 add to cart Imaging with X-rays

Note: This page contains sample records for the topic "jim francfort advanced" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Advanced Simulation Capability for  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Simulation Capability for Simulation Capability for Environmental Management (ASCEM) ASCEM is being developed to provide a tool and approach to facilitate robust and standardized development of perfor- mance and risk assessments for cleanup and closure activi- ties throughout the EM complex. The ASCEM team is composed of scientists from eight National Laboratories. This team is leveraging Department of Energy (DOE) investments in basic science and applied research including high performance computing codes developed through the Advanced Scientific Computing Research and Advanced Simulation & Computing pro- grams as well as collaborating with the Offices of Science, Fossil Energy, and Nuclear Energy. Challenge Current groundwater and soil remediation challenges that will continue to be addressed in the next decade include

202

Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

0 Advanced Photon Source 0 Advanced Photon Source A U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences national synchrotron x-ray research facility Search Button About Welcome Overview Visiting the APS Mission & Goals Find People Organization Charts Committees Job Openings User Information Prospective Users New Users Current Users APS User Portal Macromolecular Crystallographers Administrators Find a Beamline Apply for Beam Time Contacts Calendars Community Scientific Access Site Access Training Science & Education Science & Research Highlights Conferences Seminars Publications Annual Reports APS Upgrade Courses and Schools Graduate Programs Scientific Software Media Center Calendar of Events APS News User News Argonne/APS Press Releases Argonne/APS Feature Stories Argonne/APS In The News

203

Overview | Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

APS Overview: APS Overview: Introduction APS Systems Map LINAC Booster Synchrotron Storage Ring Insertion Devices Experiment Hall LOMs & Beamlines Overview of the APS The Advanced Photon Source (APS) at the U.S. Department of Energy's Argonne National Laboratory provides this nation's (in fact, this hemisphere's) brightest storage ring-generated x-ray beams for research in almost all scientific disciplines. Photo: Aerial Photo of APS Aerial photo of the Advanced Photon Source These x-rays allow scientists to pursue new knowledge about the structure and function of materials in the center of the Earth and in outer space, and all points in between. The knowledge gained from this research can impact the evolution of combustion engines and microcircuits, aid in the development of new pharmaceuticals, and pioneer nanotechnologies whose

204

NETL: Advanced Research - Ultrasupercritical  

NLE Websites -- All DOE Office Websites (Extended Search)

High Performance Materials > Ultrasupercritical High Performance Materials > Ultrasupercritical Advanced Research High Performance Materials Ultrasupercritical Increasing the temperature and pressure of steam improves the efficiency of boilers and turbines that use steam as the working fluid. These higher efficiency boilers and turbines require less coal and produce less greenhouse gases. Identifying materials that can operate for long periods of time at extreme temperatures and pressures is a major goal of NETL's Advanced Research Materials Program. Phase diagram of water Figure 1: Phase diagram of water To understand the terminology of boilers and turbines, it is first necessary to understand the basics of the water/steam phase diagram (see Figure 1). The normal boiling point (nbp) of water occurs at 1 atmosphere

205

Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

Tomography Interest Group Contact: Robert Winarski, Center for Nanoscale Materials winarski@anl.gov Contact: Francesco De Carlo, Advanced Photon Source decarlo@aps.anl.gov The tomography special interest group of the Advanced Photon Source (APS) at Argonne National Laboratory has been created to promote awareness of the tomography facilities at the APS and to foster communications between the various research groups. Through this group, we believe we can build a strong user community for tomography. The following beamlines have active tomography research programs: 2-BM-B (XOR) http://www.aps.anl.gov/Xray_Science_Division/Xray_Microscopy_and_Imaging/Science_and_Research/Techniques/Tomography/index.html Information about the beamline: http://beam.aps.anl.gov/pls/apsweb/beamline_display_pkg.display_beamline?p_beamline_num_c=31

206

Advanced Technology Vehicle Testing  

DOE Green Energy (OSTI)

The goal of the U.S. Department of Energy's Advanced Vehicle Testing Activity (AVTA) is to increase the body of knowledge as well as the awareness and acceptance of electric drive and other advanced technology vehicles (ATV). The AVTA accomplishes this goal by testing ATVs on test tracks and dynamometers (Baseline Performance testing), as well as in real-world applications (Fleet and Accelerated Reliability testing and public demonstrations). This enables the AVTA to provide Federal and private fleet managers, as well as other potential ATV users, with accurate and unbiased information on vehicle performance and infrastructure needs so they can make informed decisions about acquiring and operating ATVs. The ATVs currently in testing include vehicles that burn gaseous hydrogen (H2) fuel and hydrogen/CNG (H/CNG) blended fuels in internal combustion engines (ICE), and hybrid electric (HEV), urban electric, and neighborhood electric vehicles. The AVTA is part of DOE's FreedomCAR and Vehicle Technologies Program.

James Francfort

2004-06-01T23:59:59.000Z

207

Advanced drilling systems  

DOE Green Energy (OSTI)

Drilling is ubiquitous in oil, gas, geothermal, minerals, water well, and mining industries. Drilling and well completion account for 25% to 50% of the cost of producing power from geothermal energy. Reduced drilling costs will reduce the cost of electricity produced from geothermal resources. Undoubtedly, there are concepts for advanced drilling systems that have yet to be studied. However, the breadth and depth of previous efforts in this area almost guarantee that any new efforts will at least initially build on an idea or a variation of an idea that has already been investigated. Therefore, a review of previous efforts, coupled with a characterization of viable advanced drilling systems and the current state of technology as it applies to those systems, provide the basis for this study.

Pierce, K.G.; Finger, J.T. [Sandia National Labs., Albuquerque, NM (United States); Livesay, B.J. [Livesay Consultants, San Diego, CA (United States)

1995-12-31T23:59:59.000Z

208

Advanced far infrared detectors  

SciTech Connect

Recent advances in photoconductive and bolometric semiconductor detectors for wavelength 1 mm > {lambda} > 50 {mu}m are reviewed. Progress in detector performance in this photon energy range has been stimulated by new and stringent requirements for ground based, high altitude and space-borne telescopes for astronomical and astrophysical observations. The paper consists of chapters dealing with the various types of detectors: Be and Ga doped Ge photoconductors, stressed Ge:Ga devices and neutron transmutation doped Ge thermistors. Advances in the understanding of basic detector physics and the introduction of modern semiconductor device technology have led to predictable and reliable fabrication techniques. Integration of detectors into functional arrays has become feasible and is vigorously pursued by groups worldwide.

Haller, E.E.

1993-05-01T23:59:59.000Z

209

Advanced Separation Consortium  

Science Conference Proceedings (OSTI)

The Center for Advanced Separation Technologies (CAST) was formed in 2001 under the sponsorship of the US Department of Energy to conduct fundamental research in advanced separation and to develop technologies that can be used to produce coal and minerals in an efficient and environmentally acceptable manner. The CAST consortium consists of seven universities - Virginia Tech, West Virginia University, University of Kentucky, Montana Tech, University of Utah, University of Nevada-Reno, and New Mexico Tech. The consortium brings together a broad range of expertise to solve problems facing the US coal industry and the mining sector in general. At present, a total of 60 research projects are under way. The article outlines some of these, on topics including innovative dewatering technologies, removal of mercury and other impurities, and modelling of the flotation process. 1 photo.

NONE

2006-01-01T23:59:59.000Z

210

Advanced Energy Guides  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Guides Energy Guides Shanti Pless National Renewable Energy Laboratory shanti.pless@nrel.gov 303-384-6365 April 4 2013 2 | Building Technologies Office eere.energy.gov Advanced Energy Design Guides Provide prescriptive energy savings guidance and recommendations by building type and geographic location: * Design packages and strategies to help owners and designers achieve 50% site energy savings over Standard 90.1 * Two series: - 30% savings over 90.1-1999

211

Advanced geothermal technologies  

DOE Green Energy (OSTI)

Research and development in advanced technologies for geothermal energy production continue to increase the energy production options for the Nation. The high-risk investment over the past few years by the US Department of Energy in geopressured, hot dry rock, and magma energy resources is producing new means to lower production costs and to take advantage of these resources. The Nation has far larger and more regionally extensive geothermal resources than heretofore realized. At the end of a short 30-day closed-loop flow test, the manmade hot dry rock reservoir at Fenton Hill, New Mexico, was producing 10 MW thermal - and still climbing - proving the technical feasibility of this new technology. The scientific feasibility of magma energy extraction has been demonstrated, and new field tests to evaluate this technology are planned. Analysis and field tests confirm the viability of geopressured-geothermal energy and the prospect that many dry-hole or depleted petroleum wells can be turned into producing geopressured-geothermal wells. Technological advances achieved through hot dry rock, magma, geopressured, and other geothermal research are making these resources and conventional hydrothermal resources more competitive. Noteworthy among these technological advances are techniques in computer simulation of geothermal reservoirs, new means for well stimulation, new high-temperature logging tools and packers, new hard-rock penetration techniques, and new methods for mapping fracture flow paths across large underground areas in reservoirs. In addition, many of these same technological advances can be applied by the petroleum industry to help lower production costs in domestic oil and gas fields. 5 refs., 4 figs.

Whetten, J.T.; Murphy, H.D.; Hanold, R.J.; Myers, C.W.; Dunn, J.C.

1988-01-01T23:59:59.000Z

212

Advanced Energy Guides  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energy Guides Energy Guides Shanti Pless National Renewable Energy Laboratory shanti.pless@nrel.gov 303-384-6365 April 4 2013 2 | Building Technologies Office eere.energy.gov Advanced Energy Design Guides Provide prescriptive energy savings guidance and recommendations by building type and geographic location: * Design packages and strategies to help owners and designers achieve 50% site energy savings over Standard 90.1 * Two series: - 30% savings over 90.1-1999

213

Advanced Metering Infrastructure Technology  

Science Conference Proceedings (OSTI)

Revenue security is a major concern for utilities. Theft of electric service in the United States is widespread. In 2006, the revenue estimate for non-technical losses was 6.5 billion. Non-technical losses are associated with unidentified and uncollected revenue from pilferage, tampering with meters, defective meters, and errors in meter reading. In this report, revenue security describes the use of advanced metering infrastructure (AMI) technology to minimize non-technical losses.

2008-12-08T23:59:59.000Z

214

Advanced Turbine Design Program  

SciTech Connect

The prime objective of this project task is to select a natural gas fired as Advanced Turbine Systems (ATS) capable of reaching 60% cycle efficiency. Several cycles were compared and evaluated under all different kind of aspects, to determine the one with the highest potential and, at the same time, the best overall fit within and experience base to guarantee project goals. The combined cycle with multistep development potential was identified as the system to reach the 60% or greater thermal efficiency.

van der Linden, S.; Gnaedig, G.; Kreitmeier, F.

1992-01-01T23:59:59.000Z

215

Advanced Turbine Design Program  

SciTech Connect

The prime objective of this project task is to select a natural gas fired as Advanced Turbine Systems (ATS) capable of reaching 60% cycle efficiency. Several cycles were compared and evaluated under all different kind of aspects, to determine the one with the highest potential and, at the same time, the best overall fit within and experience base to guarantee project goals. The combined cycle with multistep development potential was identified as the system to reach the 60% or greater thermal efficiency.

van der Linden, S.; Gnaedig, G.; Kreitmeier, F.

1992-12-31T23:59:59.000Z

216

Advanced Manufacturing Partnership  

Energy.gov (U.S. Department of Energy (DOE))

AMO leads DOE's participation in the national interagency Advanced Manufacturing Partnership (AMP). AMO joins with other Federal agencies investing in innovation and cost-shared R&D projects, supporting manufacturing infrastructure, and facilitating job creation. These actions save energy and provide benefits to U.S. industry and the national economy. AMO contributes more broadly to the AMP with activities in Technology Development, Shared Infrastructure and Facilities, Education and Workforce Development.

217

Advanced Polymer Processing Facility  

Science Conference Proceedings (OSTI)

Some conclusions of this presentation are: (1) Radiation-assisted nanotechnology applications will continue to grow; (2) The APPF will provide a unique focus for radiolytic processing of nanomaterials in support of DOE-DP, other DOE and advanced manufacturing initiatives; (3) {gamma}, X-ray, e-beam and ion beam processing will increasingly be applied for 'green' manufacturing of nanomaterials and nanocomposites; and (4) Biomedical science and engineering may ultimately be the biggest application area for radiation-assisted nanotechnology development.

Muenchausen, Ross E. [Los Alamos National Laboratory

2012-07-25T23:59:59.000Z

218

Advanced Lighting Technologies  

Science Conference Proceedings (OSTI)

This report continues the technical assessment of advanced lighting technologies in the following product areasdimmable light-emitting diode (LED) screw-in replacement lamp, hybrid compact fluorescent lamp/halogen screw-in replacement lamp, replacement recessed can LED downlight, organic LED (OLED) disc, replacement mini high-intensity discharge (HID) lamp and ballast system, and solid-state plasma lighting (miniature HID technology) high-bay fixture. The research in this project helps to demonstrate how...

2011-12-21T23:59:59.000Z

219

Advancement of Electrochromic Windows  

NLE Websites -- All DOE Office Websites (Extended Search)

Advancement of Electrochromic Windows Advancement of Electrochromic Windows Title Advancement of Electrochromic Windows Publication Type Report LBNL Report Number LBNL-59821 Year of Publication 2006 Authors Lee, Eleanor S., Stephen E. Selkowitz, Robert D. Clear, Dennis L. DiBartolomeo, Joseph H. Klems, Luis L. Fernandes, Gregory J. Ward, Vorapat Inkarojrit, and Mehry Yazdanian Date Published 04/2006 Other Numbers CEC-500-2006-052 Keywords commercial buildings, daylight, daylighting controls, Electrochromic windows, energy efficiency, human factors, peak demand, switchable windows, visual comfort Abstract This guide provides consumer-oriented information about switchable electrochromic (EC) windows. Electrochromic windows change tint with a small applied voltage, providing building owners and occupants with the option to have clear or tinted windows at any time, irrespective of whether it's sunny or cloudy. EC windows can be manually or automatically controlled based on daylight, solar heat gain, glare, view, energy-efficiency, peak electricity demand response, or other criteria. Window controls can be integrated with other building systems, such as lighting and heating/cooling mechanical systems, to optimize interior environmental conditions, occupant comfort, and energy-efficiency.

220

Advanced Technology Vehicle Testing  

DOE Green Energy (OSTI)

The light-duty vehicle transportation sector in the United States depends heavily on imported petroleum as a transportation fuel. The Department of Energys Advanced Vehicle Testing Activity (AVTA) is testing advanced technology vehicles to help reduce this dependency, which would contribute to the economic stability and homeland security of the United States. These advanced technology test vehicles include internal combustion engine vehicles operating on 100% hydrogen (H2) and H2CNG (compressed natural gas) blended fuels, hybrid electric vehicles, neighborhood electric vehicles, urban electric vehicles, and electric ground support vehicles. The AVTA tests and evaluates these vehicles with closed track and dynamometer testing methods (baseline performance testing) and accelerated reliability testing methods (accumulating lifecycle vehicle miles and operational knowledge within 1 to 1.5 years), and in normal fleet environments. The Arizona Public Service Alternative Fuel Pilot Plant and H2-fueled vehicles are demonstrating the feasibility of using H2 as a transportation fuel. Hybrid, neighborhood, and urban electric test vehicles are demonstrating successful applications of electric drive vehicles in various fleet missions. The AVTA is also developing electric ground support equipment (GSE) test procedures, and GSE testing will start during the fall of 2003. All of these activities are intended to support U.S. energy independence. The Idaho National Engineering and Environmental Laboratory manages these activities for the AVTA.

James Francfort

2003-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "jim francfort advanced" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Advanced Microturbine Systems  

SciTech Connect

Dept. of Energy (DOE) Cooperative Agreement DE-FC02-00-CH11061 was originally awarded to Honeywell International, Inc. ?? Honeywell Power Systems Inc. (HPSI) division located in Albuquerque, NM in October 2000 to conduct a program titled Advanced Microturbine Systems (AMS). The DOE Advanced Microturbines Systems Program was originally proposed as a five-year program to design and develop a high efficiency, low emissions, durable microturbine system. The period of performance was to be October 2000 through September 2005. Program efforts were underway, when one year into the program Honeywell sold the intellectual property of Honeywell Power Systems Inc. and HPSI ceased business operations. Honeywell made an internal decision to restructure the existing program due to the HPSI shutdown and submitted a formal request to DOE on September 24, 2001 to transfer the Cooperative Agreement to Honeywell Engines, Systems and Services (HES&S) in Phoenix, AZ in order to continue to offer support for DOE's Advanced Microturbine Program. Work continued on the descoped program under Cooperative Agreement No. DE-FC26-00-CH11061 and has been completed.

None

2005-12-31T23:59:59.000Z

222

Advancing Next-Generation Vehicles  

NLE Websites -- All DOE Office Websites (Extended Search)

the U.S. Department of Energy's (DOE's) lead laboratory for researching advanced vehicle technologies, including hy- the U.S. Department of Energy's (DOE's) lead laboratory for researching advanced vehicle technologies, including hy- brid, plug-in hybrid, battery electric, and alternative fuel vehicles, Argonne provides transportation research critical to advancing the development of next-generation vehicles. Central to this effort is the Lab's Advanced Powertrain Research Facility (APRF), an integrated four-wheel drive chassis dynamometer and component test facility.

223

Advanced Developments in Electron Microscopy  

Science Conference Proceedings (OSTI)

About this Symposium. Meeting, Materials Science & Technology 2011. Symposium, Advanced Developments in Electron Microscopy. Sponsorship, MS&T...

224

Materials Characterization | Advanced Materials | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Characterization Nuclear Forensics Scanning Probes Related Research Materials Theory and Simulation Energy Frontier Research Centers Advanced Materials Home | Science &...

225

Advanced Research Robert R. Romanosky  

E-Print Network (OSTI)

in advanced ultra supercritical (USC) coal-fired power plants. The advanced materials developed in this project are essential for construction of coal-fired boilers with advanced steam cycles involving much higher temperatures and pressures than those presently used in conventional pulverized coal (PC) power

226

Advanced Green Technologies | Open Energy Information  

Open Energy Info (EERE)

Advanced Green Technologies Place Fort Lauderdale, Florida Zip 33311 Product Advanced Green Technologies is a US-based distributor of PV systems. It is owned by Advanced Roofing...

227

Draft Advanced Fossil Solicitation | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Advanced Fossil Solicitation Federal loan guarantee solicitation announcement -- Advanced Fossil Energy Projects. Microsoft Word - Draft Advanced Fossil Solicitation Final Draft.1...

228

Manufacturing Science and Technology: Advanced Manufacturing...  

NLE Websites -- All DOE Office Websites (Extended Search)

Contacts Advanced Manufacturing Trades Training Program Business Program Lead Yvonne Baros Advanced Manufacturing Trades Training Program Tom Souther Advanced Technology Academy...

229

Advanced Manufacturing Office: NewsDetail  

NLE Websites -- All DOE Office Websites (Extended Search)

Office: NewsDetail on Twitter Bookmark Advanced Manufacturing Office: NewsDetail on Google Bookmark Advanced Manufacturing Office: NewsDetail on Delicious Rank Advanced...

230

Advanced Biofuels Workshop  

Gasoline and Diesel Fuel Update (EIA)

August 1, 2012 August 1, 2012 In Attendance U.S. Energy Information Administration 1000 Independence Ave. SW, Room 2E-069 Washington, DC 20585 Adam Sieminski EIA Terry Higgins Hart Downstream Energy Services Peter Ryus RSB Services Foundation Zia Haq DOE Robert Kozak Atlantic Biomass Conversion Leticia Phillips UNICA/Brazillian Sugarecane Industry Assoc. Paul Kamp Leifmark, LLC/Inbicon Biomass Steve Gerber Fiberight Joanne Ivancic Advanced Biofuels USA John G. Cowie Agenda 2020 Technology Alliance Jeff Hazle American Fuel & Petrochemical Manufacturers Bryan Just American Petroleum Institute Barry Bernfeld Bunge Global Agribusiness Michael Corbin CLF Partners International LLC Paul Grabowski DOE, Office of Biomass Program

231

Advanced Demand Responsive Lighting  

NLE Websites -- All DOE Office Websites (Extended Search)

Demand Demand Responsive Lighting Host: Francis Rubinstein Demand Response Research Center Technical Advisory Group Meeting August 31, 2007 10:30 AM - Noon Meeting Agenda * Introductions (10 minutes) * Main Presentation (~ 1 hour) * Questions, comments from panel (15 minutes) Project History * Lighting Scoping Study (completed January 2007) - Identified potential for energy and demand savings using demand responsive lighting systems - Importance of dimming - New wireless controls technologies * Advanced Demand Responsive Lighting (commenced March 2007) Objectives * Provide up-to-date information on the reliability, predictability of dimmable lighting as a demand resource under realistic operating load conditions * Identify potential negative impacts of DR lighting on lighting quality Potential of Demand Responsive Lighting Control

232

Horizontal Advanced Tensiometer  

DOE Patents (OSTI)

An horizontal advanced tensiometer is described that allows the monitoring of the water pressure of soil positions, particularly beneath objects or materials that inhibit the use of previous monitoring wells. The tensiometer includes a porous cup, a pressure transducer (with an attached gasket device), an adaptive chamber, at least one outer guide tube which allows access to the desired horizontal position, a transducer wire, a data logger and preferably an inner guide tube and a specialized joint which provides pressure on the inner guide tube to maintain the seal between the gasket of the transducer and the adaptive chamber.

Hubbell, Joel M.; Sisson, James B.

2004-06-22T23:59:59.000Z

233

NETL: Advanced Research - Materials  

NLE Websites -- All DOE Office Websites (Extended Search)

High Performance Materials > Chrome Oxide Refractory High Performance Materials > Chrome Oxide Refractory Advanced Research High Performance Materials Chrome Oxide Refractory One notable NETL success is the development of a chrome oxide refractory material capable of working in slagging gasifier conditions. In this project, researchers first determined that one of the major failure mechanisms for chrome oxide refractories exposed to the intense heat and corrosive environment was spalling, or the chipping or flaking of refractory material from an exposed face. They used this information to formulate a high-chrome oxide refractory composition that resists spalling, resulting in a refractory with a longer service life in the gasifier. Inside an ultrasupercritical (USC) pulverized coal power plant, materials are exposed to temperatures up to 760°C and pressures up to 5,000 psi. Operating a USC system can improve power plant efficiency up to 47% and reduce emissions. However, finding boiler and turbine materials that can hold up under extreme conditions requires new high-temperature metal alloys and ceramic coatings, as well as computational modeling research to optimize the processing of these materials. Advanced Research Materials Development program successes in this area include the following:

234

Advanced PFBC transient analysis  

SciTech Connect

Transient modeling and analysis of advanced Pressurized Fluidized Bed Combustion (PFBC) systems is a research area that is currently under investigation by the US Department of Energy`s Federal Energy Technology Center (FETC). The object of the effort is to identify key operating parameters that affect plant performance and then quantify the basic response of major sub-systems to changes in operating conditions. PC-TRAX{trademark}, a commercially available dynamic software program, was chosen and applied in this modeling and analysis effort. This paper describes the development of a series of TRAX-based transient models of advanced PFBC power plants. These power plants burn coal or other suitable fuel in a PFBC, and the high temperature flue gas supports low-Btu fuel gas or natural gas combustion in a gas turbine topping combustor. When it is utilized, the low-Btu fuel gas is produced in a bubbling bed carbonizer. High temperature, high pressure combustion products exiting the topping combustor are expanded in a modified gas turbine to generate electrical power. Waste heat from the system is used to raise and superheat steam for a reheat steam turbine bottoming cycle that generates additional electrical power. Basic control/instrumentation models were developed and modeled in PC-TRAX and used to investigate off-design plant performance. System performance for various transient conditions and control philosophies was studied.

White, J.S. [Parsons Power Group, Inc., Reading, PA (United States); Bonk, D.L. [USDOE Federal Energy Technology Center, Morgantown, WV (United States)

1997-05-01T23:59:59.000Z

235

Advanced PFBC transient analysis  

SciTech Connect

Transient modeling and analysis of Advanced Pressurized Fluidized Bed Combustion (PFBC) systems is a research area that is currently under investigative study by the United States Department of Energy`s Morgantown Energy Technology Center (METC). The object of the effort is to identify key operating parameters affecting plant performance and then quantify the basic response of major sub-systems to changes in operating conditions. PC-TRAX, a commercially available dynamic software program, was chosen and applied in this modeling and analysis effort. This paper summarizes and describes the development of a series of TRAX-based transient models of Advanced PFBC power plants. These power plants generate a high temperature flue gas by burning coal or other suitable fuel in a PFBC. The high temperature flue gas supports low-Btu fuel gas or natural gas combustion in a gas turbine topping combustor. When utilized, low-Btu fuel gas is produced in a bubbling bed carbonizer. High temperature, high pressure combustion products exiting the topping combustor are expanded in a modified gas turbine to generate electrical power. Waste heat from the system is used to generate and superheat steam for a reheat steam turbine bottoming cycle that generates additional electrical power. Basic control/instrumentation models were developed and modeled in PC-TRAX and used to investigate off-design plant performance. System performance for various transient conditions and control philosophies was studied.

White, J.S. [Parsons Power Group, Inc., Reading, PA (United States); Bonk, D.L.; Rogers, L. [USDOE Morgantown Energy Technology Center, WV (United States)

1996-12-31T23:59:59.000Z

236

Advanced converter reactors  

SciTech Connect

Advanced converter reactors (ACRs) of primary US interest are those which can be commercialized within about 20 years, and are: Advanced Light-Water Reactors, Spectral-Shift-Control Reactors, Heavy-Water Reactors (CANDU type), and High-Temperature Gas-Cooled Reactors. These reactors can operate on uranium, thorium, or uranium-thorium fuel cycles, but have the greatest fuel utilization on thorium type cycles. The water reactors tend to operate more economically on uranium cycles, while the HTGR is more economical on thorium cycles. Thus, the HTGR had the greatest practical potential for improving fuel utilization. If the US has 3.4 to 4 million tons U/sub 3/O/sub 8/ at reasonable costs, ACRs can make important contributions to maintaining a high nuclear power level for many decades; further, they work well with fast breeder reactors in the long term under symbiotic fueling conditions. Primary nuclear data needs of ACRs are integral measurements of reactivity coefficients and resonance absorption integrals.

Kasten, P.R.

1979-01-01T23:59:59.000Z

237

Advanced Metering Infrastructure  

SciTech Connect

The report provides an overview of the development of Advanced Metering Infrastructure (AMI). Metering has historically served as the cash register for the utility industry. It measured the amount of energy used and supported the billing of customers for that usage. However, utilities are starting to look at meters in a whole different way, viewing them as the point of contact with customers in supporting a number of operational imperatives. The combination of smart meters and advanced communications has opened up a variety of methods for utilities to reduce operating costs while offering new services to customers. A concise look is given at what's driving interest in AMI, the components of AMI, and the creation of a business case for AMI. Topics covered include: an overview of AMI including the history of metering and development of smart meters; a description of the key technologies involved in AMI; a description of key government initiatives to support AMI; an evaluation of the current market position of AMI; an analysis of business case development for AMI; and, profiles of 21 key AMI vendors.

NONE

2007-10-15T23:59:59.000Z

238

Advanced desiccant materials research  

DOE Green Energy (OSTI)

The long-range goal of this task is to understand the role of surface phenomena in desiccant cooling materials. The background information includes a brief introduction to desiccant cooling systems (DCS) and the role of the desiccant as a system component. The purpose, background, rationale, and long-term technical approach for studying advanced desiccant materials are then treated. Experimental methods for measuring water vapor sorption by desiccants are described, and the rationale is then given for choosing a quartz crystal microbalance (QCM) for measuring sorption isotherms, rates, and cyclic stability. Background information is given about the QCM, including the quartz crystal resonator itself, the support structure for the quartz crystal, and the advantages and limitations of a QCM. The apparatus assembled and placed into operation during CY 1985 is described. The functions of the principal components of the equipment, i.e., the QCM, vacuum system, pressure gauges, residual gas analyzer, constant temperature bath, and data acquisition system, are described as they relate to the water vapor sorption measurements now under way. The criteria for narrowing the potential candidates as advanced desiccant materials for the initial studies are given. Also given is a list of 20 principal candidate materials identified based on the criteria and data available in the literature.

Czanderna, A.W.; Thomas, T.M.

1986-05-01T23:59:59.000Z

239

Vehicle Technologies Office: Advanced Combustion Engines  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Combustion Advanced Combustion Engines to someone by E-mail Share Vehicle Technologies Office: Advanced Combustion Engines on Facebook Tweet about Vehicle Technologies Office: Advanced Combustion Engines on Twitter Bookmark Vehicle Technologies Office: Advanced Combustion Engines on Google Bookmark Vehicle Technologies Office: Advanced Combustion Engines on Delicious Rank Vehicle Technologies Office: Advanced Combustion Engines on Digg Find More places to share Vehicle Technologies Office: Advanced Combustion Engines on AddThis.com... Just the Basics Hybrid & Vehicle Systems Energy Storage Advanced Power Electronics & Electrical Machines Advanced Combustion Engines Combustion Engines Emission Control Waste Heat Recovery Fuels & Lubricants Materials Technologies Advanced Combustion Engines

240

Advanced Reactor Technologies | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Advanced Reactor Advanced Reactor Technologies Advanced Reactor Technologies Advanced Reactor Technologies Advanced Reactor Technologies The Office of Advanced Reactor Technologies (ART) sponsors research, development and deployment (RD&D) activities through its Next Generation Nuclear Plant (NGNP), Advanced Reactor Concepts (ARC), and Advanced Small Modular Reactor (aSMR) programs to promote safety, technical, economical, and environmental advancements of innovative Generation IV nuclear energy technologies. The Office of Nuclear Energy (NE) will pursue these advancements through RD&D activities at the Department of Energy (DOE) national laboratories and U.S. universities, as well as through collaboration with industry and international partners. These activities will focus on advancing scientific

Note: This page contains sample records for the topic "jim francfort advanced" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Chemistry & Physics at Interfaces | Advanced Materials | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

from Atoms to Systems Materials Characterization Materials Theory and Simulation Energy Frontier Research Centers Advanced Materials Home | Science & Discovery | Advanced...

242

Advanced Materials and Processes for Extreme Environments  

Science Conference Proceedings (OSTI)

Symposium, Advanced Materials and Reservoir Engineering for Extreme Oil & Gas Environments. Presentation Title, Advanced Materials and Processes for...

243

Advanced Materials Technologies - Energy Innovation Portal  

Advanced Materials Technology Marketing Summaries Here youll find marketing summaries of advanced materials technologies available for licensing from ...

244

Irradiation Performance of Advanced and Model Alloys  

Science Conference Proceedings (OSTI)

Mar 14, 2012 ... Mechanical Performance of Materials for Current and Advanced Nuclear Reactors: Irradiation Performance of Advanced and Model Alloys

245

Advanced Metering Infrastructure Security Considerations | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Metering Infrastructure Security Considerations Advanced Metering Infrastructure Security Considerations The purpose of this report is to provide utilities implementing Advanced...

246

News and Awards | Advanced Materials | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Events and Conferences Supporting Organizations Advanced Materials Home | Science & Discovery | Advanced Materials | News & Awards SHARE News and Awards Latest News...

247

Advanced Technology Vehicles Manufacturing Incentive Program...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Technology Vehicles Manufacturing Incentive Program Advanced Technology Vehicles Manufacturing Incentive Program A fact sheet detailling the advanced technology vehicles...

248

Advanced Light Source Activity Report 2002  

E-Print Network (OSTI)

ALS and the Advanced Photon Source (APS). The LDLR crystals,Director for the Advanced Photon Source (APS), and Steven

Duque editor, Theresa; Greiner editor, Annette; Moxon editor, Elizabeth; Robinson editor, Arthur; Tamura editor, Lori

2003-01-01T23:59:59.000Z

249

ADVANCED TURBINE SYSTEMS PROGRAM  

SciTech Connect

Natural gas combustion turbines are rapidly becoming the primary technology of choice for generating electricity. At least half of the new generating capacity added in the US over the next twenty years will be combustion turbine systems. The Department of Energy has cosponsored with Siemens Westinghouse, a program to maintain the technology lead in gas turbine systems. The very ambitious eight year program was designed to demonstrate a highly efficient and commercially acceptable power plant, with the ability to fire a wide range of fuels. The main goal of the Advanced Turbine Systems (ATS) Program was to develop ultra-high efficiency, environmentally superior and cost effective competitive gas turbine systems for base load application in utility, independent power producer and industrial markets. Performance targets were focused on natural gas as a fuel and included: System efficiency that exceeds 60% (lower heating value basis); Less than 10 ppmv NO{sub x} emissions without the use of post combustion controls; Busbar electricity that are less than 10% of state of the art systems; Reliability-Availability-Maintainability (RAM) equivalent to current systems; Water consumption minimized to levels consistent with cost and efficiency goals; and Commercial systems by the year 2000. In a parallel effort, the program was to focus on adapting the ATS engine to coal-derived or biomass fuels. In Phase 1 of the ATS Program, preliminary investigators on different gas turbine cycles demonstrated that net plant LHV based efficiency greater than 60% was achievable. In Phase 2 the more promising cycles were evaluated in greater detail and the closed-loop steam-cooled combined cycle was selected for development because it offered the best solution with least risk for achieving the ATS Program goals for plant efficiency, emissions, cost of electricity and RAM. Phase 2 also involved conceptual ATS engine and plant design and technology developments in aerodynamics, sealing, combustion, cooling, materials, coatings and casting development. The market potential for the ATS gas turbine in the 2000-2014 timeframe was assessed for combined cycle, simple cycle and integrated gasification combined cycle, for three engine sizes. The total ATS market potential was forecasted to exceed 93 GW. Phase 3 and Phase 3 Extension involved further technology development, component testing and W501ATS engine detail design. The technology development efforts consisted of ultra low NO{sub x} combustion, catalytic combustion, sealing, heat transfer, advanced coating systems, advanced alloys, single crystal casting development and determining the effect of steam on turbine alloys. Included in this phase was full-load testing of the W501G engine at the McIntosh No. 5 site in Lakeland, Florida.

Gregory Gaul

2004-04-21T23:59:59.000Z

250

Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

Home Home Group Members Accelerator Magnets Insertion Devices Facilities Presentations & Publications Internal Magnetic Devices Group The primary mission of the Magnetic Devices (MD) Group is to design, build, and maintain Insertion Devices (IDs) that are reliable and transparent to the electron beam at the Advanced Photon Source (APS). The majority of IDs at the APS are conventional planar hybrid undulators, but an essential part of the mission is to develop novel IDs, such as short-period superconducting undulators and long-period electromagnetic undulators. The capabilities of APS IDs are matched to users' experimental needs. The mission also includes magnetic tuning of the IDs to ensure their near-ideal performance as x-ray sources and calculations to predict the radiation

251

Visiting | Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

Visiting the APS Visiting the APS If you have questions or need assistance planning your visit, please contact the APS User Office. Obtaining site access: General info: Visitors and new users | Non-U.S. Citizens Visitor registration: request access as a visitor who will not do hands-on work (guests, family members, students, etc.) Traveling to the APS: Transportation: Resources | University of Chicago Shuttle external link Directions: to Argonne | to the APS User Office Maps: Argonne Campus external link | Conference Center (402) | APS Facility & Beamlines | Parking Currency: The hotels and banks near Argonne do not exchange currency. Plan on using major credit cards, U.S. traveler's checks, or exchange currency in advance at the airport. See also: The Universal Currency Converter(tm) external link

252

Welcome | Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

Welcome Welcome Aerial view of APS Aerial view of the APS Welcome to the Advanced Photon Source (APS) at Argonne National Laboratory. Whether you are a current or potential scientific user of our unique facility or are simply interested in learning more about the APS, we are delighted that you are visiting our website. The APS is funded by the Office of Science, Office of Basic Energy Sciences in the U.S. Department of Energy. We operate a National User Facility that is open to everyone who has a need for extremely brilliant x-ray photon beams. The APS is one of the most technologically complex machines in the world. This premier national research facility provides the brightest x-ray beams in the Western Hemisphere to more than 5,000 (and growing) scientists from

253

Advanced Containment System  

SciTech Connect

An advanced containment system for containing buried waste and associated leachate. A trench is dug on either side of the zone of interest containing the buried waste so as to accommodate a micro tunnel boring machine. A series of small diameter tunnels are serially excavated underneath the buried waste. The tunnels are excavated by the micro tunnel boring machine at a consistent depth and are substantially parallel to each other. As tunneling progresses, steel casing sections are connected end to end in the excavated portion of the tunnel so that a steel tube is formed. Each casing section has complementary interlocking structure running its length that interlocks with complementary interlocking structure on the adjacent casing section. Thus, once the first tube is emplaced, placement of subsequent tubes is facilitated by the complementary interlocking structure on the adjacent, previously placed, casing sections.

Kostelnik, Kevin M. (Idaho Falls, ID); Kawamura, Hideki (Tokyo, JP); Richardson, John G. (Idaho Falls, ID); Noda, Masaru (Tokyo, JP)

2005-05-24T23:59:59.000Z

254

Advanced Containment System  

SciTech Connect

An advanced containment system for containing buried waste and associated leachate. A trench is dug on either side of the zone of interest containing the buried waste so as to accommodate a micro tunnel boring machine. A series of small diameter tunnels are serially excavated underneath the buried waste. The tunnels are excavated by the micro tunnel boring machine at a consistent depth and are substantially parallel to each other. As tunneling progresses, steel casing sections are connected end to end in the excavated portion of the tunnel so that a steel tube is formed. Each casing section has complementary interlocking structure running its length that interlocks with complementary interlocking structure on the adjacent casing section. Thus, once the first tube is emplaced, placement of subsequent tubes is facilitated by the complementary interlocking structure on the adjacent, previously placed, casing sections.

Kostelnik, Kevin M. (Idaho Falls, ID); Kawamura, Hideki (Tokyo, JP); Richardson, John G. (Idaho Falls, ID); Noda, Masaru (Tokyo, JP)

2004-10-12T23:59:59.000Z

255

Advanced drilling systems study.  

Science Conference Proceedings (OSTI)

This report documents the results of a study of advanced drilling concepts conducted jointly for the Natural Gas Technology Branch and the Geothermal Division of the U.S. Department of Energy. A number of alternative rock cutting concepts and drilling systems are examined. The systems cover the range from current technology, through ongoing efforts in drilling research, to highly speculative concepts. Cutting mechanisms that induce stress mechanically, hydraulically, and thermally are included. All functions necessary to drill and case a well are considered. Capital and operating costs are estimated and performance requirements, based on comparisons of the costs for alternative systems to conventional drilling technology, are developed. A number of problems common to several alternatives and to current technology are identified and discussed.

Pierce, Kenneth G.; Livesay, Billy Joe; Finger, John Travis (Livesay Consultants, Encintas, CA)

1996-05-01T23:59:59.000Z

256

ADVANCED CUTTINGS TRANSPORT STUDY  

DOE Green Energy (OSTI)

This report includes a review of the progress made in ACTF Flow Loop development and research during 90 days pre-award period (May 15-July 14, 1999) and the following three months after the project approval date (July15-October 15, 1999) The report presents information on the following specific subjects; (a) Progress in Advanced Cuttings Transport Facility design and development, (b) Progress report on the research project ''Study of Flow of Synthetic Drilling Fluids Under Elevated Pressure and Temperature Conditions'', (c) Progress report on the research project ''Study of Cuttings Transport with Foam Under LPAT Conditions (Joint Project with TUDRP)'', (d) Progress report on the research project ''Study of Cuttings Transport with Aerated Muds Under LPAT Conditions (Joint Project with TUDRP)'', (e) Progress report on the research project ''Study of Foam Flow Behavior Under EPET Conditions'', (f) Progress report on the instrumentation tasks (Tasks 11 and 12) (g) Activities towards technology transfer and developing contacts with oil and service company members.

Ergun Kuru; Stefan Miska; Nicholas Takach; Kaveh Ashenayi; Gerald Kane; Len Volk; Mark Pickell; Evren Ozbayoglu; Barkim Demirdal; Paco Vieira; Affonso Lourenco

1999-10-15T23:59:59.000Z

257

Advanced Telemetry Data Capturing  

SciTech Connect

This project developed a new generation or advanced data capturing process specifically designed for use in future telemetry test systems at the Kansas City Plant (KCP). Although similar data capturing processes are performed both commercially and at other DOE weapon facilities, the equipment used is not specifically designed to perform acceptance testing requirements unique to the KCP. Commercially available equipment, despite very high cost (up to $125,000), is deficient in reliability and long-term maintainability necessary in test systems at this facility. There are no commercial sources for some requirements, specifically Terminal Data Analyzer (TDA) data processing. Although other custom processes have been developed to satisfy these test requirements, these designs have become difficult to maintain and upgrade.

Paschke, G.A.

2000-05-16T23:59:59.000Z

258

Advancing Residential Energy Retrofits  

Science Conference Proceedings (OSTI)

To advance the market penetration of residential retrofits, Oak Ridge National Laboratory (ORNL) and Southface Energy Institute (Southface) partnered to provide technical assistance on nine home energy retrofits in metropolitan Atlanta with simulated source energy savings of 30% to 50%. Retrofit measures included duct sealing, air infiltration reductions, attic sealing and roofline insulation, crawlspace sealing, HVAC and water heating equipment replacement, and lighting and appliance upgrades. This paper will present a summary of these measures and their associated impacts on important home performance metrics, such as air infiltration and duct leakage. The average estimated source energy savings for the homes is 33%, and the actual heating season average savings is 32%. Additionally, a case study describing expected and realized energy savings of completed retrofit measures of one of the homes is described in this paper.

Jackson, Roderick K [ORNL; Boudreaux, Philip R [ORNL; Kim, Eyu-Jin [Southface Energy Institute; Roberts, Sydney [Southface Energy Institute

2012-01-01T23:59:59.000Z

259

Advanced Manufacturing Office: Motor Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Motor Systems to Motor Systems to someone by E-mail Share Advanced Manufacturing Office: Motor Systems on Facebook Tweet about Advanced Manufacturing Office: Motor Systems on Twitter Bookmark Advanced Manufacturing Office: Motor Systems on Google Bookmark Advanced Manufacturing Office: Motor Systems on Delicious Rank Advanced Manufacturing Office: Motor Systems on Digg Find More places to share Advanced Manufacturing Office: Motor Systems on AddThis.com... Quick Links Energy Resource Center Technical Publications by Energy System Energy-Efficient Technologies Incentives & Resources by Zip Code Better Plants Superior Energy Performance Contacts Motor Systems Photo of Man Checking Motor Performance Motor-driven equipment accounts for 54% of manufacturing electricity use. Dramatic energy and cost savings can be achieved in motor systems by

260

hybrid electric vehicle and lithium polymer nev testing  

NLE Websites -- All DOE Office Websites (Extended Search)

P1.2 - Hybrid Electric Vehicle and Lithium Polymer NEV Testing P1.2 - Hybrid Electric Vehicle and Lithium Polymer NEV Testing James Edward Francfort Advanced Vehicle Testing Activity Idaho National Laboratory P.O. Box 1625, Idaho Falls, ID. 83415-3830 james.francfort@inl.gov Abstract: The U.S. Department of Energy's Advanced Vehicle Testing Activity tests hybrid electric, pure electric, and other advanced technology vehicles. As part of this testing, 28 hybrid electric vehicles (HEV) are being tested in fleet, dynamometer, and closed track environments. This paper discusses some of the HEV test results, with an emphasis on the battery performance of the HEVs. It also discusses the testing results for a small electric vehicle with a lithium polymer traction battery. Keywords: hybrid; neighborhood; electric; battery; fuel;

Note: This page contains sample records for the topic "jim francfort advanced" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Advanced Distribution Automation Technical Assessments  

Science Conference Proceedings (OSTI)

This 2008 progress report on advanced distribution technical assessments focused on the International Electrotechnical Commission (IEC) TC-57 body of standards.

2008-12-19T23:59:59.000Z

262

Advanced Coal Conversion Process Demonstration  

NLE Websites -- All DOE Office Websites (Extended Search)

Clean Coal Technology Program Advanced Coal Conversion Process Demonstration A DOE Assessment DOENETL-20051217 U.S. Department of Energy Office of Fossil Energy National Energy...

263

Video Library | Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

Archives APS Brochure Annual Reports Posters Podcasts Image Gallery external site Video Library Syndicated Feeds (RSS) Now Playing: The Advanced Photon Source More videos:...

264

Video Library | Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

Video Library Related Links: APS Colloquium APS Podcasts APS Today More videos: Introduction to the APS Physics of the Blues Now Playing: Building the Advanced Photon Source This...

265

Systems Engineering Advancement Research Initiative  

E-Print Network (OSTI)

strategic partners Define and research fundamental concepts for advanced system engineering Contribute materials, and handbooks to inspire, inform, and guide students and practitioners VENUE SEAri is located

de Weck, Olivier L.

266

User Information | Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

User Information The Advanced Photon Source provides a variety of guides, resources, and information for prospective, new, and current users. In this section: For Prospective Users...

267

Avoid advanced control project mistakes  

Science Conference Proceedings (OSTI)

On-line process optimization is worth working for but without robust advanced controls it will never happen. In this paper, the author evaluates how well advanced controls worked in five refineries. Having spent money on such projects, the refineries faced a situation in which there was no measurable improvement in overall plant performance. These refineries are owned by different companies, yet they share a pattern of mistakes in administrating advanced controls. Highlighting these mistakes shows ways to improve the organization of advanced control technology, to avoid obvious pitfalls.

Friedman, Y.Z. (Petrocontrol, Madison, NJ (United States))

1992-10-01T23:59:59.000Z

268

Advanced Application Development Program Information  

Energy.gov (U.S. Department of Energy (DOE))

Summary of the Tranmission Reliability program's Advanced Applications Research and Development activity area. This program develops and demonstrates tools to monitor and control the grid with...

269

Advanced Manufacturing Office: Information Resources  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

incentives, tools, and training to help companies of all sizes identify energy saving projects and chart a path toward continuous energy improvement. Advanced Manufacturing...

270

Advanced Materials Research Highlights | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Materials | Research Highlights Research Highlights 1-10 of 44 Results Prev 12345 Next Topotactic valence state control in epitaxial multivalent oxides July 17, 2013 -...

271

Advanced Cladding Materials for Fuels  

Science Conference Proceedings (OSTI)

Fuel Cycle Research and Development. Advanced Cladding Materials for. Fuels. Stuart A. Maloy. M. Nastasi, A. Misra. Los Alamos National Laboratory.

272

Media Center | Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

impact on nearly every aspect of our lives. Annual Reports Articles on Advanced Photon Source research and engineering highlights that are written for the interested...

273

Information Technology | Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Photon Source Information Technology Support Search APS ... Search Button About User Information News & Events Science & Education Beamlines Divisions Argonne Home >...

274

Advanced Flow-Battery Systems  

Science Conference Proceedings (OSTI)

Presentation Title, Advanced Flow-Battery Systems ... Abstract Scope, Flow- battery systems (FBS) were originally developed over 30 years ago and have since...

275

Vulnerabilities in Advanced Metering Infrastructure.  

E-Print Network (OSTI)

??Smart grid has become a reality in the United States. Billions of dollars are being poured into deploying a major component, - the Advanced Metering (more)

Podkuiko, Dmitry

2012-01-01T23:59:59.000Z

276

CAT Communicator | Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

Division XSD Groups Industry Argonne Home Advanced Photon Source News Archives CAT Communicator CAT Communicator was a newsletter intended to provide APS information to...

277

Participant Advance Information PLEASE PRINT!  

Science Conference Proceedings (OSTI)

... Hotel Workshop participants may select from a ... for a listing of area hotels: http://www ... of Education, Department of Energy's Advanced Manufacturing ...

2013-01-23T23:59:59.000Z

278

NREL: Advanced Power Electronics - Webmaster  

NLE Websites -- All DOE Office Websites (Extended Search)

Your name: Your email address: Your message: Send Message Printable Version Advanced Power Electronics Home About the Project Technology Basics Research & Development...

279

Solid-State Lighting: 2010 Solid-State Lighting Manufacturing...  

NLE Websites -- All DOE Office Websites (Extended Search)

Unlimited The Impact of Infrastructure on Global Manufacturing Decisions (PDF 1.46 MB) Jim Anderson, Philips Color Kinetics Invited Manufacturing R&D Presentations Advanced Epi...

280

Advanced Hydrogen Turbine Development  

DOE Green Energy (OSTI)

Siemens has developed a roadmap to achieve the DOE goals for efficiency, cost reduction, and emissions through innovative approaches and novel technologies which build upon worldwide IGCC operational experience, platform technology, and extensive experience in G-class operating conditions. In Phase 1, the technologies and concepts necessary to achieve the program goals were identified for the gas turbine components and supporting technology areas and testing plans were developed to mitigate identified risks. Multiple studies were conducted to evaluate the impact in plant performance of different gas turbine and plant technologies. 2015 gas turbine technologies showed a significant improvement in IGCC plant efficiency, however, a severe performance penalty was calculated for high carbon capture cases. Thermodynamic calculations showed that the DOE 2010 and 2015 efficiency targets can be met with a two step approach. A risk management process was instituted in Phase 1 to identify risk and develop mitigation plans. For the risks identified, testing and development programs are in place and the risks will be revisited periodically to determine if changes to the plan are necessary. A compressor performance prediction has shown that the design of the compressor for the engine can be achieved with additional stages added to the rear of the compressor. Tip clearance effects were studied as well as a range of flow and pressure ratios to evaluate the impacts to both performance and stability. Considerable data was obtained on the four candidate combustion systems: diffusion, catalytic, premix, and distributed combustion. Based on the results of Phase 1, the premixed combustion system and the distributed combustion system were chosen as having the most potential and will be the focus of Phase 2 of the program. Significant progress was also made in obtaining combustion kinetics data for high hydrogen fuels. The Phase 1 turbine studies indicate initial feasibility of the advanced hydrogen turbine that meets the aggressive targets set forth for the advanced hydrogen turbine, including increased rotor inlet temperature (RIT), lower total cooling and leakage air (TCLA) flow, higher pressure ratio, and higher mass flow through the turbine compared to the baseline. Maintaining efficiency with high mass flow Syngas combustion is achieved using a large high AN2 blade 4, which has been identified as a significant advancement beyond the current state-of-the-art. Preliminary results showed feasibility of a rotor system capable of increased power output and operating conditions above the baseline. In addition, several concepts were developed for casing components to address higher operating conditions. Rare earth modified bond coat for the purpose of reducing oxidation and TBC spallation demonstrated an increase in TBC spallation life of almost 40%. The results from Phase 1 identified two TBC compositions which satisfy the thermal conductivity requirements and have demonstrated phase stability up to temperatures of 1850 C. The potential to join alloys using a bonding process has been demonstrated and initial HVOF spray deposition trials were promising. The qualitative ranking of alloys and coatings in environmental conditions was also performed using isothermal tests where significant variations in alloy degradation were observed as a function of gas composition. Initial basic system configuration schematics and working system descriptions have been produced to define key boundary data and support estimation of costs. Review of existing materials in use for hydrogen transportation show benefits or tradeoffs for materials that could be used in this type of applications. Hydrogen safety will become a larger risk than when using natural gas fuel as the work done to date in other areas has shown direct implications for this type of use. Studies were conducted which showed reduced CO{sub 2} and NOx emissions with increased plant efficiency. An approach to maximize plant output is needed in order to address the DOE turbine goal for 20-30% reduction o

Joesph Fadok

2008-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "jim francfort advanced" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Rerouting in advance reservation networks  

Science Conference Proceedings (OSTI)

The advance reservation of network connections is an area of growing interest and a range of service models and algorithms have been proposed to achieve various scheduling objectives, i.e., including optimization-based strategies and heuristic schemes. ... Keywords: Advance reservation, Bandwidth migration, Load-balancing, Rerouting

Chongyang Xie; Hamed Alazemi; Nasir Ghani

2012-07-01T23:59:59.000Z

282

Advanced Light Source  

NLE Websites -- All DOE Office Websites (Extended Search)

Next >> Next >> Visitors Access to the ALS Gate Access guest-house Guest House lab-shuttles Lab Shuttles maps-and-directions Maps and Directions Parking Safety Safety for Users safety-for-staff Safety for Staff In Case of Emergency Resources Acronyms Multimedia Employment staff-intranet Staff Intranet Site Map Contact Digg: ALSBerkeleyLab Facebook Page: 208064938929 Flickr: advancedlightsource Twitter: ALSBerkeleyLab YouTube: AdvancedLightSource January 2014 Sun Mon Tue Wed Thu Fri Sat 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Recent Science Highlights Minding the Gap Makes for More Efficient Solar Cells Using novel materials to develop thin, flexible, and more efficient photovoltaic cells is one of the hottest topics in current materials research. A class of transition metals undergo a dramatic change that makes them ideal for solar energy applications.

283

ADVANCED CUTTINGS TRANSPORT STUDY  

SciTech Connect

This is the second quarterly progress report for Year 2 of the ACTS project. It includes a review of progress made in Flow Loop development and research during the period of time between Oct 1, 2000 and December 31, 2000. This report presents a review of progress on the following specific tasks: (a) Design and development of an Advanced Cuttings Transport Facility (Task 2: Addition of a foam generation and breaker system), (b) Research project (Task 6): ''Study of Cuttings Transport with Foam Under LPAT Conditions (Joint Project with TUDRP)'', (c) Research project (Task 7): ''Study of Cuttings Transport with Aerated Muds Under LPAT Conditions (Joint Project with TUDRP)'', (d) Research project (Task 8): ''Study of Flow of Synthetic Drilling Fluids Under Elevated Pressure and Temperature Conditions'', (e) Research project (Task 9): ''Study of Foam Flow Behavior Under EPET Conditions'', (f) Research project (Task 10): ''Study of Cuttings Transport with Aerated Mud Under Elevated Pressure and Temperature Conditions'', (g) Research on instrumentation tasks to measure: Cuttings concentration and distribution in a flowing slurry (Task 11), and Foam properties while transporting cuttings. (Task 12), (h) Development of a Safety program for the ACTS Flow Loop. Progress on a comprehensive safety review of all flow-loop components and operational procedures. (Task 1S). (i) Activities towards technology transfer and developing contacts with Petroleum and service company members, and increasing the number of JIP members. The tasks Completed During This Quarter are Task 7 and Task 8.

Troy Reed; Stefan Miska; Nicholas Takach; Kaveh Ashenayi; Gerald Kane; Mark Pickell; Len Volk; Mike Volk; Barkim Demirdal; Affonso Lourenco; Evren Ozbayoglu; Paco Vieira; Lei Zhou

2000-01-30T23:59:59.000Z

284

ADVANCED CUTTINGS TRANSPORT STUDY  

Science Conference Proceedings (OSTI)

This is the first quarterly progress report for Year 2 of the ACTS project. It includes a review of progress made in Flow Loop development and research during the period of time between July 14, 2000 and September 30, 2000. This report presents information on the following specific tasks: (a) Progress in Advanced Cuttings Transport Facility design and development (Task 2), (b) Progress on research project (Task 8): ''Study of Flow of Synthetic Drilling Fluids Under Elevated Pressure and Temperature Conditions'', (c) Progress on research project (Task 6): ''Study of Cuttings Transport with Foam Under LPAT Conditions (Joint Project with TUDRP)'', (d) Progress on research project (Task 7): ''Study of Cuttings Transport with Aerated Muds Under LPAT Conditions (Joint Project with TUDRP)'', (e) Progress on research project (Task 9): ''Study of Foam Flow Behavior Under EPET Conditions'', (f) Initiate research on project (Task 10): ''Study of Cuttings Transport with Aerated Mud Under Elevated Pressure and Temperature Conditions'', (g) Progress on instrumentation tasks to measure: Cuttings concentration and distribution (Tasks 11), and Foam properties (Task 12), (h) Initiate a comprehensive safety review of all flow-loop components and operational procedures. Since the previous Task 1 has been completed, we will now designate this new task as: (Task 1S). (i) Activities towards technology transfer and developing contacts with Petroleum and service company members, and increasing the number of JIP members.

Troy Reed; Stefan Miska; Nicholas Takach; Kaveh Ashenayi; Gerald Kane; Mark Pickell; Len Volk; Mike Volk; Barkim Demirdal; Affonso Lourenco; Evren Ozbayoglu; Paco Vieira

2000-10-30T23:59:59.000Z

285

ADVANCED CUTTINGS TRANSPORT STUDY  

SciTech Connect

This is the fourth quarterly progress report for Year-3 of the ACTS Project. It includes a review of progress made in: (1) Flow Loop construction and development and (2) research tasks during the period of time between April 1, 2002 and June 30, 2002. This report presents a review of progress on the following specific tasks: (a) Design and development of an Advanced Cuttings Transport Facility (Task 3: Addition of a Cuttings Injection/Separation System), (b) Research project (Task 6): ''Study of Cuttings Transport with Foam Under LPAT Conditions (Joint Project with TUDRP)''; (c) Research project (Task 9b): ''Study of Foam Flow Behavior Under EPET Conditions''; (d) Research project (Task 10): ''Study of Cuttings Transport with Aerated Mud Under Elevated Pressure and Temperature Conditions''; (e) Research on three instrumentation tasks to measure: Cuttings concentration and distribution in a flowing slurry (Task 11), Foam texture while transporting cuttings. (Task 12), and Viscosity of Foam under EPET (Task 9b); (f) Development of a Safety program for the ACTS Flow Loop. Progress on a comprehensive safety review of all flow-loop components and operational procedures. (Task 1S); (g) Activities towards technology transfer and developing contacts with Petroleum and service company members, and increasing the number of JIP members.

Troy Reed; Stefan Miska; Nicholas Takach; Kaveh Ashenayi; Mark Pickell; Len Volk; Mike Volk; Evren Ozbayoglu; Lei Zhou

2002-07-30T23:59:59.000Z

286

ADVANCED CUTTINGS TRANSPORT STUDY  

SciTech Connect

This is the second quarterly progress report for Year-4 of the ACTS Project. It includes a review of progress made in: (1) Flow Loop construction and development and (2) research tasks during the period of time between October 1, 2002 and December 30, 2002. This report presents a review of progress on the following specific tasks. (a) Design and development of an Advanced Cuttings Transport Facility Task 3: Addition of a Cuttings Injection/Separation System, Task 4: Addition of a Pipe Rotation System. (b) New research project (Task 9b): ''Development of a Foam Generator/Viscometer for Elevated Pressure and Elevated Temperature (EPET) Conditions''. (d) Research project (Task 10): ''Study of Cuttings Transport with Aerated Mud Under Elevated Pressure and Temperature Conditions''. (e) Research on three instrumentation tasks to measure: Cuttings concentration and distribution in a flowing slurry (Task 11), Foam texture while transporting cuttings. (Task 12), and Viscosity of Foam under EPET (Task 9b). (f) New Research project (Task 13): ''Study of Cuttings Transport with Foam under Elevated Pressure and Temperature Conditions''. (g) Development of a Safety program for the ACTS Flow Loop. Progress on a comprehensive safety review of all flow-loop components and operational procedures. (Task 1S). (h) Activities towards technology transfer and developing contacts with Petroleum and service company members, and increasing the number of JIP members.

Troy Reed; Stefan Miska; Nicholas Takach; Kaveh Ashenayi; Mark Pickell; Len Volk; Mike Volk; Lei Zhou; Zhu Chen; Crystal Redden; Aimee Washington

2003-01-30T23:59:59.000Z

287

ADVANCED CUTTINGS TRANSPORT STUDY  

Science Conference Proceedings (OSTI)

This is the third quarterly progress report for Year 3 of the ACTS Project. It includes a review of progress made in: (1) Flow Loop construction and development and (2) research tasks during the period of time between Jan. 1, 2002 and Mar. 31, 2002. This report presents a review of progress on the following specific tasks: (a) Design and development of an Advanced Cuttings Transport Facility (Task 3: Addition of a Cuttings Injection/Separation System), (b) Research project (Task 6): ''Study of Cuttings Transport with Foam Under LPAT Conditions (Joint Project with TUDRP)'', (c) Research project (Task 9b): ''Study of Foam Flow Behavior Under EPET Conditions'', (d) Research project (Task 10): ''Study of Cuttings Transport with Aerated Mud Under Elevated Pressure and Temperature Conditions'', (e) Research on three instrumentation tasks to measure: Cuttings concentration and distribution in a flowing slurry (Task 11), Foam texture while transporting cuttings. (Task 12), and Viscosity of Foam under EPET (Task 9b); (f) Development of a Safety program for the ACTS Flow Loop, progress on a comprehensive safety review of all flow-loop components and operational procedures. (Task 1S); and (g) Activities towards technology transfer and developing contacts with Petroleum and service company members, and increasing the number of JIP members.

Troy Reed; Stefan Miska; Nicholas Takach; Kaveh Ashenayi; Mark Pickell; Len Volk; Mike Volk; Evren Ozbayoglu; Lei Zhou

2002-04-30T23:59:59.000Z

288

ADVANCED CUTTINGS TRANSPORT STUDY  

Science Conference Proceedings (OSTI)

This is the second quarterly progress report for Year 3 of the ACTS project. It includes a review of progress made in: (1) Flow Loop development and (2) research tasks during the period of time between Oct 1, 2001 and Dec. 31, 2001. This report presents a review of progress on the following specific tasks: (a) Design and development of an Advanced Cuttings Transport Facility (Task 3: Addition of a Cuttings Injection/Collection System), (b) Research project (Task 6): ''Study of Cuttings Transport with Foam Under LPAT Conditions (Joint Project with TUDRP)'', (c) Research project (Task 9): ''Study of Foam Flow Behavior Under EPET Conditions'', (d) Research project (Task 10): ''Study of Cuttings Transport with Aerated Mud Under Elevated Pressure and Temperature Conditions'', (e) Research on instrumentation tasks to measure: Cuttings concentration and distribution in a flowing slurry (Task 11), and Foam properties while transporting cuttings. (Task 12), (f) Development of a Safety program for the ACTS Flow Loop. Progress on a comprehensive safety review of all flow-loop components and operational procedures. (Task 1S). (g) Activities towards technology transfer and developing contacts with Petroleum and service company members, and increasing the number of JIP members.

Troy Reed; Stefan Miska; Nicholas Takach; Kaveh Ashenayi; Gerald Kane; Mark Pickell; Len Volk; Mike Volk; Affonso Lourenco; Evren Ozbayoglu; Lei Zhou

2002-01-30T23:59:59.000Z

289

ADVANCED CUTTINGS TRANSPORT STUDY  

SciTech Connect

This is the first quarterly progress report for Year-4 of the ACTS Project. It includes a review of progress made in: (1) Flow Loop construction and development and (2) research tasks during the period of time between July 1, 2002 and Sept. 30, 2002. This report presents a review of progress on the following specific tasks: (a) Design and development of an Advanced Cuttings Transport Facility Task 3: Addition of a Cuttings Injection/Separation System, Task 4: Addition of a Pipe Rotation System, (b) New Research project (Task 9b): ''Development of a Foam Generator/Viscometer for Elevated Pressure and Elevated Temperature (EPET) Conditions'', (d) Research project (Task 10): ''Study of Cuttings Transport with Aerated Mud Under Elevated Pressure and Temperature Conditions'', (e) Research on three instrumentation tasks to measure: Cuttings concentration and distribution in a flowing slurry (Task 11), Foam texture while transporting cuttings (Task 12), Viscosity of Foam under EPET (Task 9b). (f) Development of a Safety program for the ACTS Flow Loop. Progress on a comprehensive safety review of all flow-loop components and operational procedures. (Task 1S). (g) Activities towards technology transfer and developing contacts with Petroleum and service company members, and increasing the number of JIP members.

Troy Reed; Stefan Miska; Nicholas Takach; Kaveh Ashenayi; Mark Pickell; Len Volk, Mike Volk; Lei Zhou; Zhu Chen; Crystal Redden; Aimee Washington

2002-10-30T23:59:59.000Z

290

Advanced Production Planning Models  

SciTech Connect

>This report describes the innovative modeling approach developed as a result of a 3-year Laboratory Directed Research and Development project. The overall goal of this project was to provide an effective suite of solvers for advanced production planning at facilities in the nuclear weapons complex (NWC). We focused our development activities on problems related to operations at the DOE's Pantex Plant. These types of scheduling problems appear in many contexts other than Pantex--both within the NWC (e.g., Neutron Generators) and in other commercial manufacturing settings. We successfully developed an innovative and effective solution strategy for these types of problems. We have tested this approach on actual data from Pantex, and from Org. 14000 (Neutron Generator production). This report focuses on the mathematical representation of the modeling approach and presents three representative studies using Pantex data. Results associated with the Neutron Generator facility will be published in a subsequent SAND report. The approach to task-based scheduling described here represents a significant addition to the literature for large-scale, realistic scheduling problems in a variety of production settings.

JONES,DEAN A.; LAWTON,CRAIG R.; KJELDGAARD,EDWIN A.; WRIGHT,STEPHEN TROY; TURNQUIST,MARK A.; NOZICK,LINDA K.; LIST,GEORGE F.

2000-12-01T23:59:59.000Z

291

ADVANCED HYBRID PARTICULATE COLLECTOR  

SciTech Connect

A new concept in particulate control, called an advanced hybrid particulate collector (AHPC), is being developed under funding from the US Department of Energy. The AHPC combines the best features of electrostatic precipitators (ESPs) and baghouses in an entirely novel manner. The AHPC concept combines fabric filtration and electrostatic precipitation in the same housing, providing major synergism between the two methods, both in the particulate collection step and in transfer of dust to the hopper. The AHPC provides ultrahigh collection efficiency, overcoming the problem of excessive fine-particle emissions with conventional ESPs, and solves the problem of reentrainment and recollection of dust in conventional baghouses. Phase I of the development effort consisted of design, construction, and testing of a 5.7-m{sup 3}/min (200-acfm) working AHPC model. Results from both 8-hour parametric tests and 100-hour proof-of-concept tests with two different coals demonstrated excellent operability and greater than 99.99% fine-particle collection efficiency.

Stanley J. Miller; Grant L. Schelkoph; Grant E. Dunham

2000-12-01T23:59:59.000Z

292

Jim Wells County, Texas: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

County, Texas: Energy Resources County, Texas: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 27.7841718°, -98.0465185° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":27.7841718,"lon":-98.0465185,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

293

Jim Hogg County, Texas: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

Hogg County, Texas: Energy Resources Hogg County, Texas: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 26.995506°, -98.7481167° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":26.995506,"lon":-98.7481167,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

294

Table of Contents Jim Hill, National Institute of Standards and ...  

Science Conference Proceedings (OSTI)

... streets, and time for brave firemen to enter the building ... to resolve as we go forward in terms of what ... the morning of September 12 to search for my ...

2013-09-23T23:59:59.000Z

295

THE DA VINCI CODE, BY DAN BROWN REFLECTIONS JIM KENNEY  

E-Print Network (OSTI)

opinion, based on some years of close acquaintance with the general outlines of western esoteric tradition, and pseudo-scholarship. Today, as scholars in esoteric studies largely agree, the bogus so far outweighs

Fernando, Chrisantha

296

ESS 2012 Peer Review - Energy Storage in the Southeast - Jim...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Initial Results a Objectives * Determine whether energy storage can reduce the costs of delivering electricity in a coal-heavy, vertically integrated system that does not expect...

297

ESS 2012 Peer Review - Nevada Energy Storage Study - Jim Ellison...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2011-XXXXP Objectives To answer the following questions: * Is there a business case for energy storage in Nevada? * What value can energy storage provide to Nevada in the face of...

298

Technical Memorandum To: File From: Jim Eidem Subject: Environmental...  

NLE Websites -- All DOE Office Websites (Extended Search)

(Barr) Attached is a table summarizing the analytical data from the proposed wind turbine area and a map showing the locations of the test trenches. On May 19, 2010, a total...

299

Y-12s Moon Rocks and Jim Williams  

NLE Websites -- All DOE Office Websites (Extended Search)

history of Quality at Y-12. Having done that, I am now being asked to consider other such organizational or programmatic histories, such as the history of Safety (Environment,...

300

Legal subversives : African American lawyers in the Jim Crow South  

E-Print Network (OSTI)

law was death by electrocution. Apparently, Georgia feltpunishment should be by electrocution only. 110 McGill,

Pye, David Kenneth

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "jim francfort advanced" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Jim LeClare, Principal Member of Technical Staff  

E-Print Network (OSTI)

Abstract: This article explores criteria necessary for reliable communication between electric vehicles (EVs) and electric vehicle service equipment (EVSE). Data will demonstrate that a G3-PLC system has already met the criteria established by the automotive and utility industries. Multiple international tests prove that a G3-PLC implementation is the optimal low-frequency solution. A similar version of this article appeared in the August 2011 issue of Power Systems Design magazine. For the first time, electric vehicles (EVs) and plug-in hybrid electric vehicles (PHEVs) are building a viable market of mobile electrical energy consumers. Not surprisingly, new relationships between electricity providers (the utility companies) and automobile owners are emerging. Many utilities already offer, or are planning to offer, special tariffs, including fixed monthly rates, to EV owners. EVs impose new dynamics and demands on the electrical supply itself. There is, in fact, a symbiotic relationship developing between the EV and energy provider. Because of their large storage capacity, often 10kVH, EVs draw currents of 80A or greater over a period of hours. This strains electrical grid components, especially low-voltage transformers which can overheat and fail while serving consumers ' homes. Meanwhile, the EVs ' electrical storage capacity can also reverse the current flow. It can then supply power back to the grid, thereby helping the utilities to meet demand peaks without starting up high-carbon-output diesel generators.

unknown authors

2012-01-01T23:59:59.000Z

302

Advanced Powertrain Research Facility  

NLE Websites -- All DOE Office Websites (Extended Search)

95F 95F Vehicle Setup Information Vehicle architecture PHEV Test cell location Front Advanced Powertrain Research Facility Document date 10/18/2013 Vehicle dynamometer Input Revision Number 1 Test weight [lb] 3518 Notes: Target A [lb] 21.47 Target B [lb/mph] 0.21588 Target C [lb/mph^2] 0.012508 Test Fuel Information Revision Number 1 Test weight [lb] 3518 Test Fuel Information Fuel type EPA Tier II EEE HF0437 Fuel density [g/ml] 0.742 Fuel Net HV [BTU/lbm] 18475 Fuel type EPA Tier II EEE HF0437 T e s t I D [ # ] C y c l e C o l d s t a r t ( C S t ) H o t s t a r t [ H S t ] D a t e T e s t C e l l T e m p [ C ] T e s t C e l l R H [ % ] T e s t C e l l B a r o [ i n / H g ] V e h i c l e c o o l i n g f a n s p e e d : S p e e d M a t c h [ S M ] o r c o n s t a n t s p e e d [ C S ] S o l a r L a m p s [ W / m 2 ] V e i c l e C l i m a t e C o n t r o l s e t t i n g s H o o d P o s i t i o n [ U p ] o r [ C l o s e d ] W i n d o w P o s i t i o n [ C l o s e d ] o r [ D o w n ] C y

303

ADVANCED TURBINE SYSTEMS PROGRAM  

Science Conference Proceedings (OSTI)

The market for power generation equipment is undergoing a tremendous transformation. The traditional electric utility industry is restructuring, promising new opportunities and challenges for all facilities to meet their demands for electric and thermal energy. Now more than ever, facilities have a host of options to choose from, including new distributed generation (DG) technologies that are entering the market as well as existing DG options that are improving in cost and performance. The market is beginning to recognize that some of these users have needs beyond traditional grid-based power. Together, these changes are motivating commercial and industrial facilities to re-evaluate their current mix of energy services. One of the emerging generating options is a new breed of advanced fuel cells. While there are a variety of fuel cell technologies being developed, the solid oxide fuel cells (SOFC) and molten carbonate fuel cells (MCFC) are especially promising, with their electric efficiency expected around 50-60 percent and their ability to generate either hot water or high quality steam. In addition, they both have the attractive characteristics of all fuel cells--relatively small siting footprint, rapid response to changing loads, very low emissions, quiet operation, and an inherently modular design lending itself to capacity expansion at predictable unit cost with reasonably short lead times. The objectives of this project are to:(1) Estimate the market potential for high efficiency fuel cell hybrids in the U.S.;(2) Segment market size by commercial, industrial, and other key markets;(3) Identify and evaluate potential early adopters; and(4) Develop results that will help prioritize and target future R&D investments. The study focuses on high efficiency MCFC- and SOFC-based hybrids and competing systems such as gas turbines, reciprocating engines, fuel cells and traditional grid service. Specific regions in the country have been identified where these technologies and the corresponding early adopters are likely to be located.

Sy Ali

2002-03-01T23:59:59.000Z

304

State Technologies Advancement Collaborative  

DOE Green Energy (OSTI)

The U. S. Department of Energy (DOE), National Association of State Energy Officials (NASEO), and Association of State Energy Research and Technology Transfer Institutions (ASERTTI) signed an intergovernmental agreement on November 14, 2002, that allowed states and territories and the Federal Government to better collaborate on energy research, development, demonstration and deployment (RDD&D) projects. The agreement established the State Technologies Advancement Collaborative (STAC) which allowed the states and DOE to move RDD&D forward using an innovative competitive project selection and funding process. A cooperative agreement between DOE and NASEO served as the contracting instrument for this innovative federal-state partnership obligating funds from DOE's Office of Energy Efficiency and Renewable Energy and Office of Fossil Energy to plan, fund, and implement RDD&D projects that were consistent with the common priorities of the states and DOE. DOE's Golden Field Office provided Federal oversight and guidance for the STAC cooperative agreement. The STAC program was built on the foundation of prior Federal-State efforts to collaborate on and engage in joint planning for RDD&D. Although STAC builds on existing, successful programs, it is important to note that it was not intended to replace other successful joint DOE/State initiatives such as the State Energy Program or EERE Special Projects. Overall the STAC process was used to fund, through three competitive solicitations, 35 successful multi-state research, development, deployment, and demonstration projects with an overall average non-federal cost share of 43%. Twenty-two states were awarded at least one prime contract, and organizations in all 50 states and some territories were involved as subcontractors in at least one STAC project. Projects were funded in seven program areas: (1) Building Technologies, (2) Industrial Technologies, (3) Transportation Technologies, (4) Distributed Energy Resources, (5) Hydrogen Technology Learning Centers, (6) Fossil Energy, and (7) Rebuild America.

David S. Terry

2012-01-30T23:59:59.000Z

305

Advanced Geothermal Turbodrill  

DOE Green Energy (OSTI)

Approximately 50% of the cost of a new geothermal power plant is in the wells that must be drilled. Compared to the majority of oil and gas wells, geothermal wells are more difficult and costly to drill for several reasons. First, most U.S. geothermal resources consist of hot, hard crystalline rock formations which drill much slower than the relatively soft sedimentary formations associated with most oil and gas production. Second, high downhole temperatures can greatly shorten equipment life or preclude the use of some technologies altogether. Third, producing viable levels of electricity from geothermal fields requires the use of large diameter bores and a high degree of fluid communication, both of which increase drilling and completion costs. Optimizing fluid communication often requires creation of a directional well to intersect the best and largest number of fracture capable of producing hot geothermal fluids. Moineau motor stators made with elastomers cannot operate at geothermal temperatures, so they are limited to the upper portion of the hole. To overcome these limitations, Maurer Engineering Inc. (MEI) has developed a turbodrill that does not use elastomers and therefore can operate at geothermal temperatures. This new turbodrill uses a special gear assembly to reduce the output speed, thus allowing a larger range of bit types, especially tri-cone roller bits, which are the bits of choice for drilling hard crystalline formations. The Advanced Geothermal Turbodrill (AGT) represents a significant improvement for drilling geothermal wells and has the potential to significantly reduce drilling costs while increasing production, thereby making geothermal energy less expensive and better able to compete with fossil fuels. The final field test of the AGT will prepare the tool for successful commercialization.

W. C. Maurer

2000-05-01T23:59:59.000Z

306

Progress Report for Advanced Automotive Fuels  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Energy Energy Office of Advanced Automotive Technologies 1000 Independence Avenue, S.W. Washington, DC 20585-0121 FY 1999 FY 1999 FY 1999 FY 1999 Progress Report for Advanced Automotive Fuels Progress Report for Advanced Automotive Fuels Progress Report for Advanced Automotive Fuels Progress Report for Advanced Automotive Fuels Energy Efficiency and Renewable Energy Energy Efficiency and Renewable Energy Energy Efficiency and Renewable Energy Energy Efficiency and Renewable Energy Office of Transportation Technologies Office of Transportation Technologies Office of Transportation Technologies Office of Transportation Technologies Office of Advanced Automotive Technologies Office of Advanced Automotive Technologies Office of Advanced Automotive Technologies Office of Advanced Automotive Technologies

307

QUARTERLY REPORT OUTLINE  

NLE Websites -- All DOE Office Websites (Extended Search)

INEEL/EXT-04-02482 INEEL/EXT-04-02482 U.S. Department of Energy FreedomCAR & Vehicle Technologies Program Advanced Vehicle Testing Activity NYPA/TH!NK Clean Commute Program Report - Inception through May 2004 TECHNICAL REPORT Don Karner James Francfort Randall Solomon November 2004 Idaho National Engineering and Environmental Laboratory Bechtel BWXT Idaho, LLC INEEL/EXT-04-02482 U.S. Department of Energy FreedomCAR & Vehicle Technologies Program Advanced Vehicle Testing Activity NYPA/TH!NK Clean Commute Program Report - Inception through May 2004 Don Karner 1 James Francfort 2 Randall Solomon 3 November 2004 Idaho National Engineering and Environmental Laboratory Transportation Technology and Infrastructure Department Idaho Falls, Idaho 83415

308

untitled  

NLE Websites -- All DOE Office Websites (Extended Search)

1-12335 1-12335 U.S. Department of Energy FreedomCAR & Vehicle Technologies Program Advanced Vehicle Testing Activity Plug-in Hybrid Electric Vehicle (PHEV) Integrated Test Plan and Evaluation Program DRAFT 3-29-07 Donald Karner Roberta Brayer Derek Peterson Mindy Kirkpatrick James Francfort March 2007 The Idaho National Laboratory is a U.S. Department of Energy National Laboratory Operated by Battelle Energy Alliance ii INL/EXT-01-12335 U.S. Department of Energy FreedomCAR & Vehicle Technologies Program Advanced Vehicle Testing Activity Plug-in Hybrid Electric Vehicle (PHEV) Integrated Test Plan and Evaluation Program Donald Karner 1 Roberta Brayer 1 Derek Peterson 1 Mindy Kirpatrick 2 James Francfort 2 March 2007 Idaho National Laboratory

309

NETL: Advanced Research - The Advanced Research (AR) Program  

NLE Websites -- All DOE Office Websites (Extended Search)

AR Program AR Program Advanced Research The Advanced Research (AR) Program Advanced Research Program Diagram CLICK ON GRAPHIC TO ENLARGE CLICK ON GRAPHIC TO ENLARGE AR pursues projects in several key areas that are considered to be of greatest relevance and potential benefit to advanced coal and power systems. Many of AR's projects focus on "breakthrough" technologies or novel applications, striving to balance high risk against the prospect of high payoff in terms of measurable benefits to coal and power systems technologies - improved efficiencies, lower costs, new materials, and new processes. AR manages a portfolio that includes pre-commercial projects that rely on NETL's in-house facilities and depth of expertise, as well as collaborative external arrangements that draw upon diverse outside

310

ADVANCED STEAM GENERATORS  

SciTech Connect

Concerns about climate change have encouraged significant interest in concepts for ultra-low or ''zero''-emissions power generation systems. In some proposed concepts, nitrogen is removed from the combustion air and replaced with another diluent such as carbon dioxide or steam. In this way, formation of nitrogen oxides is prevented, and the exhaust stream can be separated into concentrated CO{sub 2} and steam or water streams. The concentrated CO{sub 2} stream could then serve as input to a CO{sub 2} sequestration process or utilized in some other way. Some of these concepts are illustrated in Figure 1. This project is an investigation of one approach to ''zero'' emission power generation. Oxy-fuel combustion is used with steam as diluent in a power cycle proposed by Clean Energy Systems, Inc. (CES) [1,2]. In oxy-fuel combustion, air separation is used to produce nearly pure oxygen for combustion. In this particular concept, the combustion temperatures are moderated by steam as a diluent. An advantage of this technique is that water in the product stream can be condensed with relative ease, leaving a pure CO{sub 2} stream suitable for sequestration. Because most of the atmospheric nitrogen has been separated from the oxidant, the potential to form any NOx pollutant is very small. Trace quantities of any minor pollutants species that do form are captured with the CO{sub 2} or can be readily removed from the condensate. The result is a nearly zero-emission power plant. A sketch of the turbine system proposed by CES is shown in Figure 2. NETL is working with CES to develop a reheat combustor for this application. The reheat combustion application is unusual even among oxy-fuel combustion applications. Most often, oxy-fuel combustion is carried out with the intent of producing very high temperatures for heat transfer to a product. In the reheat case, incoming steam is mixed with the oxygen and natural gas fuel to control the temperature of the output stream to about 1480 K. A potential concern is the possibility of quenching non-equilibrium levels of CO or unburned fuel in the mixing process. Inadequate residence times in the combustor and/or slow kinetics could possibly result in unacceptably high emissions. Thus, the reheat combustor design must balance the need for minimal excess oxygen with the need to oxidize the CO. This paper will describe the progress made to date in the design, fabrication, and simulation of a reheat combustor for an advanced steam generator system, and discuss planned experimental testing to be conducted in conjunction with NASA Glenn Research Center-Plumb Brook Station.

Richards, Geo. A.; Casleton, Kent H.; Lewis, Robie E.; Rogers, William A. (U.S. DOE National Energy Technology Laboratory); Woike, Mark R.; Willis; Brian P. (NASA Glenn Research Center)

2001-11-06T23:59:59.000Z

311

Advanced Process Heater  

SciTech Connect

The Roadmap for Process Heating Technology (March 16, 2001), identified the following priority R&D needs: Improved performance of high temperature materials; Improved methods for stabilizing low emission flames; Heating technologies that simultaneously reduce emissions, increase efficiency, and increase heat transfer. This Category I award entitled ''Proof of Concept of an Advanced Process Heater (APH) for Steel, Aluminum, and Petroleum Industries of the Future'' met the technical feasibility goals of: (1) Doubling the heat transfer rates (2) Improving thermal efficiencies by 20%, (3) Improving temperature uniformity by 100 degrees F and (4) simultaneously reducing NOx and CO2 emissions. The APH address EERE's mission priority of increasing efficiency/reducing fuel usage in energy intensive industries. One component of the APH, the SpyroCorTM, was commercialized by STORM Development's partner, Spinworks LLC. Over 2000 SpyrCorsTM were sold in 2004 resulting in 480 million BTU's of energy savings, 20% reduction in NOx and CO2 levels, and 9 jobs in N.W. Pennsylvania. A second component, the HeatCorTM, a low-cost high-temperature heat exchanger will be demonstrated by Spinworks in 2005 in preparation for commercial sales in 2006. The project occurred in the 21st Congressional District of Pennsylvania. Once fully commercialized, the APH energy savings potential is 339 trillion BTUs annually in the U.S. and will process 1.5 million more tons annually without major capital equipment expenditures. Spinworks will commercialize the APH and add over 100 U.S. workers. To accomplish the objective, STORM Development LLC teamed with Penn State University, SyCore, Inc, Spinworks LLC, and Schunk-INEX, Inc. The project consisted of component engineering and integration of the APH followed by parametric testing. All components of the system were tested in a lab furnace that simulates a full scale industrial installation. The target areas for development include: (1) Scale up STORM's Finned Stabilized Combustion, (2) Optimization of SyCore's SiGr Inserts such that the heat transfer on the exhaust leg will match the high luminosity burner leg., (3) Evaluation of the heat transfer characteristics of Schunk-INEX's finned composite tubes as a heat exchanger, and (4) Design of a system to monitor all components of the APH and control its performance such that the objectives are met.

Tom Briselden, Chris Parrish

2005-03-07T23:59:59.000Z

312

Advanced Light Source Activity Report 2005  

E-Print Network (OSTI)

upgrade on the Advanced Light Source," Nucl. Instrum. Meth.n photoemission at the Advanced Light Source," Radit. Phys.high-pressure studies at the Advanced Light Source w i t h a

Tamura Ed., Lori S.

2010-01-01T23:59:59.000Z

313

Ohio Advanced Energy Manufacturing Center  

Science Conference Proceedings (OSTI)

The program goal of the Ohio Advanced Energy Manufacturing Center (OAEMC) is to support advanced energy manufacturing and to create responsive manufacturing clusters that will support the production of advanced energy and energy-efficient products to help ensure the nation's energy and environmental security. This goal cuts across a number of existing industry segments critical to the nation's future. Many of the advanced energy businesses are starting to make the transition from technology development to commercial production. Historically, this transition from laboratory prototypes through initial production for early adopters to full production for mass markets has taken several years. Developing and implementing manufacturing technology to enable production at a price point the market will accept is a key step. Since these start-up operations are configured to advance the technology readiness of the core energy technology, they have neither the expertise nor the resources to address manufacturing readiness issues they encounter as the technology advances toward market entry. Given the economic realities of today's business environment, finding ways to accelerate this transition can make the difference between success and failure for a new product or business. The advanced energy industry touches a wide range of industry segments that are not accustomed to working together in complex supply chains to serve large markets such as automotive and construction. During its first three years, the Center has catalyzed the communication between companies and industry groups that serve the wide range of advanced energy markets. The Center has also found areas of common concern, and worked to help companies address these concerns on a segment or industry basis rather than having each company work to solve common problems individually. EWI worked with three industries through public-private partnerships to sew together disparate segments helping to promote overall industry health. To aid the overall advanced energy industry, EWI developed and launched an Ohio chapter of the non-profit Advanced Energy Economy. In this venture, Ohio joins with six other states including Colorado, Connecticut, Illinois, Maine, Massachusetts, New Hampshire, Rhode Island and Vermont to help promote technologies that deliver energy that is affordable, abundant and secure. In a more specific arena, EWI's advanced energy group collaborated with the EWI-run Nuclear Fabrication Consortium to promote the nuclear supply chain. Through this project EWI has helped bring the supply chain up to date for the upcoming period of construction, and assisted them in understanding the demands for the next generation of facilities now being designed. In a more targeted manner, EWI worked with 115 individual advanced energy companies that are attempting to bring new technology to market. First, these interactions helped EWI develop an awareness of issues common to companies in different advanced energy sectors. By identifying and addressing common issues, EWI helps companies bring technology to market sooner and at a lower cost. These visits also helped EWI develop a picture of industry capability. This helped EWI provide companies with contacts that can supply commercial solutions to their new product development challenges. By providing assistance in developing supply chain partnerships, EWI helped companies bring their technology to market faster and at a lower cost than they might have been able to do by themselves. Finally, at the most granular level EWI performed dedicated research and development on new manufacturing processes for advanced energy. During discussions with companies participating in advanced energy markets, several technology issues that cut across market segments were identified. To address some of these issues, three crosscutting technology development projects were initiated and completed with Center support. This included reversible welds for batteries and high temperature heat exchangers. It also included a novel advanced weld trainer that EWI

Kimberly Gibson; Mark Norfolk

2012-07-30T23:59:59.000Z

314

Advanced RNN Based NARMA Predictors  

Science Conference Proceedings (OSTI)

An analysis of nonlinear time series prediction schemes, realised though advanced Recurrent Neural Network (RNN) techniques is provided. Due to practical constraints in using common RNNs, such as the problem of vanishing gradient, some other ways to ...

Danilo P. Mandic; Jonathon A. Chambers

2000-08-01T23:59:59.000Z

315

Recent advances in kernel machines  

Science Conference Proceedings (OSTI)

This talk will review recent advances in the kernel methods focusing on support vector machines (SVM) for pattern recognition. Topics discussed include the kernel design issue through the multi kernel approach and the optimization issue with emphasis ...

Stphane Canu

2010-11-01T23:59:59.000Z

316

Ohio Advanced Energy Manufacturing Center  

SciTech Connect

The program goal of the Ohio Advanced Energy Manufacturing Center (OAEMC) is to support advanced energy manufacturing and to create responsive manufacturing clusters that will support the production of advanced energy and energy-efficient products to help ensure the nation's energy and environmental security. This goal cuts across a number of existing industry segments critical to the nation's future. Many of the advanced energy businesses are starting to make the transition from technology development to commercial production. Historically, this transition from laboratory prototypes through initial production for early adopters to full production for mass markets has taken several years. Developing and implementing manufacturing technology to enable production at a price point the market will accept is a key step. Since these start-up operations are configured to advance the technology readiness of the core energy technology, they have neither the expertise nor the resources to address manufacturing readiness issues they encounter as the technology advances toward market entry. Given the economic realities of today's business environment, finding ways to accelerate this transition can make the difference between success and failure for a new product or business. The advanced energy industry touches a wide range of industry segments that are not accustomed to working together in complex supply chains to serve large markets such as automotive and construction. During its first three years, the Center has catalyzed the communication between companies and industry groups that serve the wide range of advanced energy markets. The Center has also found areas of common concern, and worked to help companies address these concerns on a segment or industry basis rather than having each company work to solve common problems individually. EWI worked with three industries through public-private partnerships to sew together disparate segments helping to promote overall industry health. To aid the overall advanced energy industry, EWI developed and launched an Ohio chapter of the non-profit Advanced Energy Economy. In this venture, Ohio joins with six other states including Colorado, Connecticut, Illinois, Maine, Massachusetts, New Hampshire, Rhode Island and Vermont to help promote technologies that deliver energy that is affordable, abundant and secure. In a more specific arena, EWI's advanced energy group collaborated with the EWI-run Nuclear Fabrication Consortium to promote the nuclear supply chain. Through this project EWI has helped bring the supply chain up to date for the upcoming period of construction, and assisted them in understanding the demands for the next generation of facilities now being designed. In a more targeted manner, EWI worked with 115 individual advanced energy companies that are attempting to bring new technology to market. First, these interactions helped EWI develop an awareness of issues common to companies in different advanced energy sectors. By identifying and addressing common issues, EWI helps companies bring technology to market sooner and at a lower cost. These visits also helped EWI develop a picture of industry capability. This helped EWI provide companies with contacts that can supply commercial solutions to their new product development challenges. By providing assistance in developing supply chain partnerships, EWI helped companies bring their technology to market faster and at a lower cost than they might have been able to do by themselves. Finally, at the most granular level EWI performed dedicated research and development on new manufacturing processes for advanced energy. During discussions with companies participating in advanced energy markets, several technology issues that cut across market segments were identified. To address some of these issues, three crosscutting technology development projects were initiated and completed with Center support. This included reversible welds for batteries and high temperature heat exchangers. It also included a novel advanced weld trainer that EWI

Kimberly Gibson; Mark Norfolk

2012-07-30T23:59:59.000Z

317

Solar and wind power advancing  

U.S. Energy Information Administration (EIA) Indexed Site

Solar and wind power advancing U.S. electricity generation from wind and solar energy show no signs of slowing down. In its new monthly forecast, the U.S. Energy Information...

318

APS Upgrade | Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

Workshop on new science opportunities provided by a multi-bend achromat lattice at the APS October 21-22 Advanced Photon Source Argonne National Lab To prepare for the workshop...

319

NETL: Advanced Research - Reference Shelf  

NLE Websites -- All DOE Office Websites (Extended Search)

(December 2012) Advanced Research Sensors and Controls Project Portfolio PDF-22MB (May 2011) Coal and Power Systems Strategic Plan and Multi-Year Program Plan PDF-1.7MB (Jan...

320

Advancements in nuclear waste assay.  

E-Print Network (OSTI)

??The research described in this thesis is directed at advancing the state of the practice of the non-destructive gamma-ray assay of nuclear waste containers. A (more)

Curtis, Deborah Claire

2008-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "jim francfort advanced" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

DOE Patents Database - Advanced Search  

Office of Scientific and Technical Information (OSTI)

Advanced Search You may enter search criteria into one, or multiple fields. Use quotation marks for phrases. You may need to turn on Javascript in your browser to use this feature....

322

SERI advanced wind turbine blades  

DOE Green Energy (OSTI)

The primary goal of the Solar Energy Research Institute`s (SERI) advanced wind turbine blades is to convert the kinetic energy in the wind into mechanical energy in an inexpensive and efficient manner. To accomplish this goal, advanced wind turbine blades have been developed by SERI that utilize unique airfoil technology. Performance characteristics of the advanced blades were verified through atmospheric testing on fixed-pitch, stall-regulated horizontal-axis wind turbines (HAWTs). Of the various wind turbine configurations, the stall-regulated HAWT dominates the market because of its simplicity and low cost. Results of the atmospheric tests show that the SERI advanced blades produce 10% to 30% more energy than conventional blades. 6 refs.

Tangler, J.; Smith, B.; Jager, D.

1992-02-01T23:59:59.000Z

323

SERI advanced wind turbine blades  

DOE Green Energy (OSTI)

The primary goal of the Solar Energy Research Institute's (SERI) advanced wind turbine blades is to convert the kinetic energy in the wind into mechanical energy in an inexpensive and efficient manner. To accomplish this goal, advanced wind turbine blades have been developed by SERI that utilize unique airfoil technology. Performance characteristics of the advanced blades were verified through atmospheric testing on fixed-pitch, stall-regulated horizontal-axis wind turbines (HAWTs). Of the various wind turbine configurations, the stall-regulated HAWT dominates the market because of its simplicity and low cost. Results of the atmospheric tests show that the SERI advanced blades produce 10% to 30% more energy than conventional blades. 6 refs.

Tangler, J.; Smith, B.; Jager, D.

1992-02-01T23:59:59.000Z

324

Advanced Integrated Traction System  

SciTech Connect

The United States Department of Energy elaborates the compelling need for a commercialized competitively priced electric traction drive system to proliferate the acceptance of HEVs, PHEVs, and FCVs in the market. The desired end result is a technically and commercially verified integrated ETS (Electric Traction System) product design that can be manufactured and distributed through a broad network of competitive suppliers to all auto manufacturers. The objectives of this FCVT program are to develop advanced technologies for an integrated ETS capable of 55kW peak power for 18 seconds and 30kW of continuous power. Additionally, to accommodate a variety of automotive platforms the ETS design should be scalable to 120kW peak power for 18 seconds and 65kW of continuous power. The ETS (exclusive of the DC/DC Converter) is to cost no more than $660 (55kW at $12/kW) to produce in quantities of 100,000 units per year, should have a total weight less than 46kg, and have a volume less than 16 liters. The cost target for the optional Bi-Directional DC/DC Converter is $375. The goal is to achieve these targets with the use of engine coolant at a nominal temperature of 105C. The system efficiency should exceed 90% at 20% of rated torque over 10% to 100% of maximum speed. The nominal operating system voltage is to be 325V, with consideration for higher voltages. This project investigated a wide range of technologies, including ETS topologies, components, and interconnects. Each technology and its validity for automotive use were verified and then these technologies were integrated into a high temperature ETS design that would support a wide variety of applications (fuel cell, hybrids, electrics, and plug-ins). This ETS met all the DOE 2010 objectives of cost, weight, volume and efficiency, and the specific power and power density 2015 objectives. Additionally a bi-directional converter was developed that provides charging and electric power take-off which is the first step towards enabling a smart-grid application. GM under this work assessed 29 technologies; investigated 36 configurations/types power electronics and electric machines, filed 41 invention disclosures; and ensured technology compatibility with vehicle production. Besides the development of a high temperature ETS the development of industrial suppliers took place because of this project. Suppliers of industrial power electronic components are numerous, but there are few that have traction drive knowledge. This makes it difficult to achieve component reliability, durability, and cost requirements necessary of high volume automotive production. The commercialization of electric traction systems for automotive industry requires a strong diverse supplier base. Developing this supplier base is dependent on a close working relationship between the OEM and supplier so that appropriate component requirements can be developed. GM has worked closely with suppliers to develop components for electric traction systems. Components that have been the focus of this project are power modules, capacitors, heavy copper boards, current sensors, and gate drive and controller chip sets. Working with suppliers, detailed component specifications have been developed. Current, voltage, and operation environment during the vehicle drive cycle were evaluated to develop higher resolution/accurate component specifications.

Greg Smith; Charles Gough

2011-08-31T23:59:59.000Z

325

ADVANCED CUTTINGS TRANSPORT STUDY  

Science Conference Proceedings (OSTI)

The Advanced Cuttings Transport Study (ACTS) was a 5-year JIP project undertaken at the University of Tulsa (TU). The project was sponsored by the U.S. Department of Energy (DOE) and JIP member companies. The objectives of the project were: (1) to develop and construct a new research facility that would allow three-phase (gas, liquid and cuttings) flow experiments under ambient and EPET (elevated pressure and temperature) conditions, and at different angle of inclinations and drill pipe rotation speeds; (2) to conduct experiments and develop a data base for the industry and academia; and (3) to develop mechanistic models for optimization of drilling hydraulics and cuttings transport. This project consisted of research studies, flow loop construction and instrumentation development. Following a one-year period for basic flow loop construction, a proposal was submitted by TU to the DOE for a five-year project that was organized in such a manner as to provide a logical progression of research experiments as well as additions to the basic flow loop. The flow loop additions and improvements included: (1) elevated temperature capability; (2) two-phase (gas and liquid, foam etc.) capability; (3) cuttings injection and removal system; (4) drill pipe rotation system; and (5) drilling section elevation system. In parallel with the flow loop construction, hydraulics and cuttings transport studies were preformed using drilling foams and aerated muds. In addition, hydraulics and rheology of synthetic drilling fluids were investigated. The studies were performed under ambient and EPET conditions. The effects of temperature and pressure on the hydraulics and cuttings transport were investigated. Mechanistic models were developed to predict frictional pressure loss and cuttings transport in horizontal and near-horizontal configurations. Model predictions were compared with the measured data. Predominantly, model predictions show satisfactory agreements with the measured data. As a part of this project, instrumentation was developed to monitor cuttings beds and characterize foams in the flow loop. An ultrasonic-based monitoring system was developed to measure cuttings bed thickness in the flow loop. Data acquisition software controls the system and processes the data. Two foam generating devices were designed and developed to produce foams with specified quality and texture. The devices are equipped with a bubble recognition system and an in-line viscometer to measure bubble size distribution and foam rheology, respectively. The 5-year project is completed. Future research activities will be under the umbrella of Tulsa University Drilling Research Projects. Currently the flow loop is being used for testing cuttings transport capacity of aqueous and polymer-based foams under elevated pressure and temperature conditions. Subsequently, the effect of viscous sweeps on cuttings transport under elevated pressure and temperature conditions will be investigated using the flow loop. Other projects will follow now that the ''steady state'' phase of the project has been achieved.

Stefan Miska; Troy Reed; Ergun Kuru

2004-09-30T23:59:59.000Z

326

Advanced Microturbine Systems  

SciTech Connect

In July 2000, the United Technologies Research Center (UTRC) was one of five recipients of a US Department of Energy contract under the Advanced Microturbine System (AMS) program managed by the Office of Distributed Energy (DE). The AMS program resulted from several government-industry workshops that recognized that microturbine systems could play an important role in improving customer choice and value for electrical power. That is, the group believed that electrical power could be delivered to customers more efficiently and reliably than the grid if an effective distributed energy strategy was followed. Further, the production of this distributed power would be accomplished with less undesirable pollutants of nitric oxides (NOx) unburned hydrocarbons (UHC), and carbon monoxide (CO). In 2000, the electrical grid delivered energy to US customers at a national average of approximately 32% efficiency. This value reflects a wide range of powerplants, but is dominated by older, coal burning stations that provide approximately 50% of US electrical power. The grid efficiency is also affected by transmission and distribution (T&D) line losses that can be significant during peak power usage. In some locations this loss is estimated to be 15%. Load pockets can also be so constrained that sufficient power cannot be transmitted without requiring the installation of new wires. New T&D can be very expensive and challenging as it is often required in populated regions that do not want above ground wires. While historically grid reliability has satisfied most customers, increasing electronic transactions and the computer-controlled processes of the 'digital economy' demand higher reliability. For them, power outages can be very costly because of transaction, work-in-progress, or perishable commodity losses. Powerplants that produce the grid electrical power emit significant levels of undesirable NOx, UHC, and CO pollutants. The level of emission is quoted as either a technology metric or a system-output metric. A common form for the technology metric is in the units of PPM {at} 15% O2. In this case the metric reflects the molar fraction of the pollutant in the powerplant exhaust when corrected to a standard exhaust condition as containing 15% (molar) oxygen, assuring that the PPM concentrations are not altered by subsequent air addition or dilution. Since fuel combustion consumes oxygen, the output oxygen reference is equivalent to a fuel input reference. Hence, this technology metric reflects the moles of pollutant per mole of fuel input, but not the useful output of the powerplant-i.e. the power. The system-output metric does embrace the useful output and is often termed an output-based metric. A common form for the output-based metric is in the units of lb/MWh. This is a system metric relating the pounds of pollutant to output energy (e.g., MWh) of the powerplant.

Rosfjord, T; Tredway, W; Chen, A; Mulugeta, J; Bhatia, T

2008-12-31T23:59:59.000Z

327

ADVANCED WORKER PROTECTION SYSTEM  

Science Conference Proceedings (OSTI)

From 1993 to 2000, OSS worked under a cost share contract from the Department of Energy (DOE) to develop an Advanced Worker Protection System (AWPS). The AWPS is a protective ensemble that provides the user with both breathing air and cooling for a NIOSH-rated duration of two hours. The ensemble consists of a liquid air based backpack, a Liquid Cooling Garment (LCG), and an outer protective garment. The AWPS project was divided into two phases. During Phase 1, OSS developed and tested a full-scale prototype AWPS. The testing showed that workers using the AWPS could work twice as long as workers using a standard SCBA. The testing also provided performance data on the AWPS in different environments that was used during Phase 2 to optimize the design. During Phase 1, OSS also performed a life-cycle cost analysis on a representative clean up effort. The analysis indicated that the AWPS could save the DOE millions of dollars on D and D activities and improve the health and safety of their workers. During Phase 2, OSS worked to optimize the AWPS design to increase system reliability, to improve system performance and comfort, and to reduce the backpack weight and manufacturing costs. To support this design effort, OSS developed and tested several different generations of prototype units. Two separate successful evaluations of the ensemble were performed by the International Union of Operation Engineers (IUOE). The results of these evaluations were used to drive the design. During Phase 2, OSS also pursued certifying the AWPS with the applicable government agencies. The initial intent during Phase 2 was to finalize the design and then to certify the system. OSS and Scott Health and Safety Products teamed to optimize the AWPS design and then certify the system with the National Institute of Occupational Health and Safety (NIOSH). Unfortunately, technical and programmatic difficulties prevented us from obtaining NIOSH certification. Despite the inability of NIOSH to certify the design, OSS was able to develop and successfully test, in both the lab and in the field, a prototype AWPS. They clearly demonstrated that a system which provides cooling can significantly increase worker productivity by extending the time they can function in a protective garment. They were also able to develop mature outer garment and LCG designs that provide considerable benefits over current protective equipment, such as self donning and doffing, better visibility, and machine washable. A thorough discussion of the activities performed during Phase 1 and Phase 2 is presented in the AWPS Final Report. The report also describes the current system design, outlines the steps needed to certify the AWPS, discusses the technical and programmatic issues that prevented the system from being certified, and presents conclusions and recommendations based upon the seven year effort.

Judson Hedgehock

2001-03-16T23:59:59.000Z

328

Advanced Distillation Final Report  

Science Conference Proceedings (OSTI)

The Advanced Distillation project was concluded on December 31, 2009. This U.S. Department of Energy (DOE) funded project was completed successfully and within budget during a timeline approved by DOE project managers, which included a one year extension to the initial ending date. The subject technology, Microchannel Process Technology (MPT) distillation, was expected to provide both capital and operating cost savings compared to conventional distillation technology. With efforts from Velocys and its project partners, MPT distillation was successfully demonstrated at a laboratory scale and its energy savings potential was calculated. While many objectives established at the beginning of the project were met, the project was only partially successful. At the conclusion, it appears that MPT distillation is not a good fit for the targeted separation of ethane and ethylene in large-scale ethylene production facilities, as greater advantages were seen for smaller scale distillations. Early in the project, work involved flowsheet analyses to discern the economic viability of ethane-ethylene MPT distillation and develop strategies for maximizing its impact on the economics of the process. This study confirmed that through modification to standard operating processes, MPT can enable net energy savings in excess of 20%. This advantage was used by ABB Lumus to determine the potential impact of MPT distillation on the ethane-ethylene market. The study indicated that a substantial market exists if the energy saving could be realized and if installed capital cost of MPT distillation was on par or less than conventional technology. Unfortunately, it was determined that the large number of MPT distillation units needed to perform ethane-ethylene separation for world-scale ethylene facilities, makes the targeted separation a poor fit for the technology in this application at the current state of manufacturing costs. Over the course of the project, distillation experiments were performed with the targeted mixture, ethane-ethylene, as well as with analogous low relative volatility systems: cyclohexane-hexane and cyclopentane-pentane. Devices and test stands were specifically designed for these efforts. Development progressed from experiments and models considering sections of a full scale device to the design, fabrication, and operation of a single-channel distillation unit with integrated heat transfer. Throughout the project, analytical and numerical models and Computational Fluid Dynamics (CFD) simulations were validated with experiments in the process of developing this platform technology. Experimental trials demonstrated steady and controllable distillation for a variety of process conditions. Values of Height-to-an-Equivalent Theoretical Plate (HETP) ranging from less than 0.5 inch to a few inches were experimentally proven, demonstrating a ten-fold performance enhancement relative to conventional distillation. This improvement, while substantial, is not sufficient for MPT distillation to displace very large scale distillation trains. Fortunately, parallel efforts in the area of business development have yielded other applications for MPT distillation, including smaller scale separations that benefit from the flowsheet flexibility offered by the technology. Talks with multiple potential partners are underway. Their outcome will also help determine the path ahead for MPT distillation.

Maddalena Fanelli; Ravi Arora; Annalee Tonkovich; Jennifer Marco; Ed Rode

2010-03-24T23:59:59.000Z

329

RFI Comments - Advanced Cyber Security Center  

Science Conference Proceedings (OSTI)


2013-04-09T23:59:59.000Z

330

Independent Oversight Review, Advanced Mixed Waste Treatment...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Review, Advanced Mixed Waste Treatment Project - April 2013 Independent Oversight Review, Advanced Mixed Waste Treatment Project - April 2013 April 2013 Review of Radiation...

331

Building Technologies Office: Advanced Energy Retrofit Guides  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Energy Retrofit Guides to someone by E-mail Share Building Technologies Office: Advanced Energy Retrofit Guides on Facebook Tweet about Building Technologies Office: Advanced Energy Retrofit Guides on Twitter Bookmark Building Technologies Office: Advanced Energy Retrofit Guides on Google Bookmark Building Technologies Office: Advanced Energy Retrofit Guides on Delicious Rank Building Technologies Office: Advanced Energy Retrofit Guides on Digg Find More places to share Building Technologies Office: Advanced Energy Retrofit Guides on AddThis.com... About Take Action to Save Energy Activities 179d Tax Calculator Advanced Energy Design Guides Advanced Energy Retrofit Guides Building Energy Data Exchange Specification Buildings Performance Database Data Centers Energy Asset Score

332

Advanced Vehicle Testing Activity: Urban Electric Vehicles  

NLE Websites -- All DOE Office Websites (Extended Search)

Urban Electric Vehicles to someone by E-mail Share Advanced Vehicle Testing Activity: Urban Electric Vehicles on Facebook Tweet about Advanced Vehicle Testing Activity: Urban...

333

Advanced Vehicle Testing Activity: Neighborhood Electric Vehicle...  

NLE Websites -- All DOE Office Websites (Extended Search)

Procedures to someone by E-mail Share Advanced Vehicle Testing Activity: Neighborhood Electric Vehicle Specifications and Test Procedures on Facebook Tweet about Advanced Vehicle...

334

Advanced Vehicle Testing Activity: Hybrid Electric Vehicles  

NLE Websites -- All DOE Office Websites (Extended Search)

Hybrid Electric Vehicles to someone by E-mail Share Advanced Vehicle Testing Activity: Hybrid Electric Vehicles on Facebook Tweet about Advanced Vehicle Testing Activity: Hybrid...

335

Advanced Coal Wind Hybrid: Economic Analysis  

E-Print Network (OSTI)

of Figures Figure ES-1. Advanced Coal Wind Hybrid: Basicviii Figure 1. Advanced-Coal Wind Hybrid: Basic29 Figure 9. Sensitivity to Coal

Phadke, Amol

2008-01-01T23:59:59.000Z

336

Ohio Advanced Energy | Open Energy Information  

Open Energy Info (EERE)

Advanced Energy Jump to: navigation, search Name Ohio Advanced Energy Address 100 S. Third Street Place Columbus, Ohio Zip 43201 Website http:www.ohioadvancedenergy. References...

337

Advanced Coal Wind Hybrid: Economic Analysis  

E-Print Network (OSTI)

of Figures Figure ES-1. Advanced Coal Wind Hybrid: Basicviii Figure 1. Advanced-Coal Wind Hybrid: Basic21 Figure 6. Comparison of ACWH and CCGT-Wind

Phadke, Amol

2008-01-01T23:59:59.000Z

338

University Program in Advanced Technology | National Nuclear...  

National Nuclear Security Administration (NNSA)

& Technology Programs > Office of Advanced Simulation and Computing and Institutional R&D Programs > Institutional Research & Development > University Program in Advanced...

339

Advanced Vehicle Testing Activity: Other Internal Combustion...  

NLE Websites -- All DOE Office Websites (Extended Search)

Other Internal Combustion Engine Vehicles to someone by E-mail Share Advanced Vehicle Testing Activity: Other Internal Combustion Engine Vehicles on Facebook Tweet about Advanced...

340

Advanced Vehicle Testing Activity: Hydrogen Internal Combustion...  

NLE Websites -- All DOE Office Websites (Extended Search)

to someone by E-mail Share Advanced Vehicle Testing Activity: Hydrogen Internal Combustion Engine Vehicle Basics on Facebook Tweet about Advanced Vehicle Testing Activity:...

Note: This page contains sample records for the topic "jim francfort advanced" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Advanced Computational Methods for Turbulence and Combustion...  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Computational Methods for Turbulence and Combustion Advanced Computational Methods for Turbulence and Combustion Bell.png Key Challenges: Development and application of...

342

Advanced Vehicle Testing Activity: Hydrogen Internal Combustion...  

NLE Websites -- All DOE Office Websites (Extended Search)

to someone by E-mail Share Advanced Vehicle Testing Activity: Hydrogen Internal Combustion Engine Vehicle Specifications and Test Procedures on Facebook Tweet about Advanced...

343

Advanced Vehicle Testing Activity: Neighborhood Electric Vehicle...  

NLE Websites -- All DOE Office Websites (Extended Search)

Projects to someone by E-mail Share Advanced Vehicle Testing Activity: Neighborhood Electric Vehicle Special Projects on Facebook Tweet about Advanced Vehicle Testing...

344

Advanced Vehicle Testing Activity: Neighborhood Electric Vehicles  

NLE Websites -- All DOE Office Websites (Extended Search)

Neighborhood Electric Vehicles to someone by E-mail Share Advanced Vehicle Testing Activity: Neighborhood Electric Vehicles on Facebook Tweet about Advanced Vehicle Testing...

345

Distributed Sensor Coordination for Advanced Energy Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Distributed Sensor Coordination for Advanced Energy Systems Background As advanced energy systems grow in size, they require an increasing number of pressure, temperature, and...

346

Carbonaceous Aerosol Study Using Advanced Particle Instrumentation  

E-Print Network (OSTI)

Advanced Particle Instrumentation A Dissertation submittedUsing Advanced Particle Instrumentation by Li Qi Doctor ofinto the online instrumentation. In brief, an isokinetic

Qi, Li

2010-01-01T23:59:59.000Z

347

Advanced Vehicle Testing Activity: Energy Storage Testing  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Storage Testing to someone by E-mail Share Advanced Vehicle Testing Activity: Energy Storage Testing on Facebook Tweet about Advanced Vehicle Testing Activity: Energy...

348

Idaho National Laboratory Advanced Test Reactor Probabilistic...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Idaho National Laboratory Advanced Test Reactor Probabilistic Risk Assessment Idaho National Laboratory Advanced Test Reactor Probabilistic Risk Assessment September 19, 2012...

349

Advanced Reactor Development and Technology - Nuclear Engineering...  

NLE Websites -- All DOE Office Websites (Extended Search)

Capabilities Nuclear Systems Modeling and Design Analysis Reactor Physics and Fuel Cycle Analysis Nuclear Data Program Advanced Reactor Development Overview Advanced Fast Reactor...

350

Advanced Coal Wind Hybrid: Economic Analysis  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Coal Wind Hybrid: Economic Analysis Title Advanced Coal Wind Hybrid: Economic Analysis Publication Type Report Year of Publication 2008 Authors Phadke, Amol, Charles A....

351

Energy Basics: Alternative and Advanced Fuels  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

There are a variety of alternative and advanced fuels available, which are used to fuel alternative and advanced vehicles. Learn more about: Electricity Hydrogen Natural Gas...

352

Collaboration to advance high-performance computing  

NLE Websites -- All DOE Office Websites (Extended Search)

Collaboration to advance high-performance computing Collaboration to advance high-performance computing LANL and EMC will enhance, design, build, test, and deploy new cutting-edge...

353

Advanced Reactor Research and Development Funding Opportunity...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Advanced Reactor Research and Development Funding Opportunity Announcement Advanced Reactor Research and Development Funding Opportunity Announcement The U.S. Department of Energy...

354

Tribal Renewable Energy Advanced Course: Project Development...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Renewable Energy Advanced Course: Project Development Concepts Tribal Renewable Energy Advanced Course: Project Development Concepts Watch the DOE Office of Indian Energy renewable...

355

Advanced Technology Vehicles Manufacturing Incentive Program...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Advanced Technology Vehicles Manufacturing Incentive Program Advanced Technology Vehicles Manufacturing Incentive Program This is an interim final rule that establishes the...

356

Advance Network Reservation and Provisioning for Science  

E-Print Network (OSTI)

such as Internet 2 [1] and ESnet (Energy Sciences Network) [advanced bandwidth reservation in ESnet for on-demand highto improve the current ESnet advance network reservation

Balman, Mehmet

2010-01-01T23:59:59.000Z

357

Advanced Battery Factory | Open Energy Information  

Open Energy Info (EERE)

Edit with form History Share this page on Facebook icon Twitter icon Advanced Battery Factory Jump to: navigation, search Name Advanced Battery Factory Place Shen Zhen...

358

Advanced Solar Power ASP | Open Energy Information  

Open Energy Info (EERE)

Login | Sign Up Search Page Edit with form History Facebook icon Twitter icon Advanced Solar Power ASP Jump to: navigation, search Name Advanced Solar Power (ASP) Place Israel...

359

Advanced Manufacturing Office: Western Industrial Energy Efficiency...  

NLE Websites -- All DOE Office Websites (Extended Search)

Send a link to Advanced Manufacturing Office: Western Industrial Energy Efficiency & Combined Heat and Power Regional Dialogue Meeting to someone by E-mail Share Advanced...

360

Advanced fenestration systems for improved daylight performance  

E-Print Network (OSTI)

S.E. Selkowitz. Advanced Optical Daylighting Systems: LightAdvanced Fenestration Systems Based on the analysis presented above, we believe that daylighting systems

Selkowitz, S.; Lee, E.S.

1998-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "jim francfort advanced" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Advanced Manufacturing Office: MotorMaster+ International  

NLE Websites -- All DOE Office Websites (Extended Search)

on Twitter Bookmark Advanced Manufacturing Office: MotorMaster+ International on Google Bookmark Advanced Manufacturing Office: MotorMaster+ International on Delicious Rank...

362

Advanced Materials Technologies Available for Licensing - Energy ...  

Advanced Materials Technologies Available for Licensing U.S. Department of Energy (DOE) laboratories and participating research institutions have advanced materials ...

363

Tribal Renewable Energy Advanced Course: Project Development...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Development and Financing Essentials Tribal Renewable Energy Advanced Course: Project Development and Financing Essentials Watch the DOE Office of Indian Energy advanced course...

364

Advanced Renewable Energy | Open Energy Information  

Open Energy Info (EERE)

Renewable Energy Jump to: navigation, search Name Advanced Renewable Energy Place Italy Sector Biomass, Renewable Energy, Wind energy Product Advanced Renewable Energy Ltd combines...

365

Advanced Research Projects Agency - Energy | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Advanced Research Projects Agency - Energy Advanced Research Projects Agency - Energy recovery act Advanced Research Projects Agency - Energy More Documents & Publications Advanced...

366

Advanced Patent Waivers | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Advanced Patent Waivers Advanced Patent Waivers June 12, 2013 Advance Patent Waiver W(A)2012-028 This is a request by SIEMENS ENERGY, INC. for a DOE Advance patent waiver of domestic and foreign patent rights under agreement DE-FE0005666. May 7, 2013 Advance Patent Waiver W(A)2012-033 This is a request by GE-GLOBAL RESEARCH for a DOE Advance patent waiver of domestic and foreign patent rights under agreement DE-OE000593. April 26, 2013 Advance Patent Waiver W(A)2012-031 This is a request by SRI INTERNATIONAL for a DOE Advance patent waiver of domestic and foreign patent rights under agreement DE-NT0005578. April 3, 2013 Advance Patent Waiver W(A)2012-024 This is a request by SIEMENS ENERGY, INC. for a DOE Advance patent waiver of domestic and foreign patent rights under agreement DE-EE0005493.

367

Advanced Photon Source Industrial Liaison Office | Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

Industrial Liaison Office Industrial Liaison Office registration page New to Synchrotron Radiation New to the APS Already a User Advanced Photon Source Industrial Liaison Office APS Welcome to the Advanced Photon Source Welcome to the Advanced Photon Source (APS) at Argonne National Laboratory. We are one of five synchrotron radiation light sources operated as national user facilities by the U.S. Department of Energy's Office of Science. The APS is open to everyone who can utilize extremely bright x-ray photon beams for high-value research. This premier national research facility provides these x-ray beams to more than 5,000 scientists from all 50 United States, the District of Columbia, Puerto Rico, and several foreign countries. These scientists come to the APS from industry, universities,

368

Advanced Wall Framing; BTS Technology Fact Sheet  

SciTech Connect

Advanced framing techniques for home construction have been researched extensively and proven effective. Both builders and home owners can benefit from advanced framing. Advanced framing techniques create a structurally sound home that has lower material and labor costs than a conventionally framed house. This fact sheet describes advanced framing techniques, design considerations, and framing.

Southface Energy Institute; Tromly, K.

2000-11-07T23:59:59.000Z

369

Advancing Clean Energy Technology (Fact Sheet)  

SciTech Connect

DOE/EERE Solar Energy Technologies Program Fact Sheet - Advancing Clean Energy Technology, May 2010.

2010-07-01T23:59:59.000Z

370

Advanced Coal Wind Hybrid: Economic Analysis  

E-Print Network (OSTI)

LBNL-1248E Advanced Coal Wind Hybrid: Economic Analysis Principal Authors Amol Phadke1 , Charles;Advanced Coal Wind Hybrid: Economic Analysis ii LBNL-1248E Advanced Coal Wind Hybrid: Economic Analysis and Analysis of the U.S. Department of Energy (DOE) under Contract No. DE-AC02-05CH11231. #12;#12;Advanced Coal

371

FY 2014 NIST Budget Request Emphasizes Advanced ...  

Science Conference Proceedings (OSTI)

FY 2014 NIST Budget Request Emphasizes Advanced Manufacturing, Cybersecurity. From NIST Tech Beat: April 17, 2013. ...

2013-04-17T23:59:59.000Z

372

NIST Advances Single Photon Management for Quantum ...  

Science Conference Proceedings (OSTI)

NIST Advances Single Photon Management for Quantum Computers. For Immediate Release: January 19, 2011. ...

2011-01-20T23:59:59.000Z

373

Advanced Computer Graphics CSCI 6631 Section 001  

E-Print Network (OSTI)

Shaders · Animation · Color, Visual Realism · Advanced Texture Mapping (Bump, Environment Mapping) · Scene

Summa, Christopher M.

374

Challenges to Innovation in Advanced Manufacturing: Industry ...  

Science Conference Proceedings (OSTI)

... Thomas Rose: Advanced Processing Technology, Norman ... define product acceptability by augmenting ... National and international standards have ...

2013-05-18T23:59:59.000Z

375

The Advanced Manufacturing Jobs and Innovation Accelerator ...  

Science Conference Proceedings (OSTI)


2012-06-26T23:59:59.000Z

376

Association of Advancement of Science (AAAS) Fellow  

Science Conference Proceedings (OSTI)

Fellow of the American Association of Advancement of Science (AAAS). Award Winner: Eswaran Subrahmanian. Description: ...

2013-05-13T23:59:59.000Z

377

Education: The Advanced IRP Seminar  

NLE Websites -- All DOE Office Websites (Extended Search)

7 7 Education: The Advanced IRP Seminar The Center has now run four seminars on advanced integrated resource planning (IRP) for state public utility commission staff members from around the country. Technology transfer is a central aspect of the Energy Analysis Program's IRP project. Reviewing utility IRP filings by state utility regulatory commissions is a new challenge to commissioners because many IRP concepts, especially those dealing with demand-side management, are unfamiliar. At the request of the National Association of Regulatory Utility Commissioners, the EAP designed a seminar on leading IRP issues for state commission staff who must review these utility filings. The fourth annual LBL Advanced IRP Seminar in early June hosted staff members from 22 utility regulatory commissions representing 21 state

378

News Releases | Advanced Materials | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

News & Awards News & Awards News Releases Honors & Awards News Features Advanced Materials Home | Science & Discovery | Advanced Materials | News & Awards | News Releases News Releases 1-7 of 7 Results ORNL devises recipe to fine-tune diameter of silica rods December 16, 2013 - OAK RIDGE, Tenn., Dec. 16, 2013 - By controlling the temperature of silica rods as they grow, researchers at the Department of Energy's Oak Ridge National Laboratory could be setting the stage for advances in anti-reflective solar cells, computer monitors, TV screens, eye glasses and more. ORNL's Bruce Pint elected 2014 NACE fellow December 13, 2013 - OAK RIDGE, Tenn., Dec. 13, 2013 - Bruce Pint, a research staff member at the Department of Energy's Oak Ridge National Laboratory, has been elected a 2014 National Association of Corrosion

379

ADVANCED NUCLEAR TRANSFORMATION TECHNOLOGY SUBCOMMITTEE  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Report of Report of ADVANCED NUCLEAR TRANSFORMATION TECHNOLOGY SUBCOMMITTEE of the NUCLEAR ENERGY RESEARCH ADVISORY COMMITTEE 24 October 2003 BURTON RICHTER, CHAIR DARLEANE C. HOFFMAN SEKAZI K. MTINGWA RONALD P. OMBERG SILVIE PILLON JOY L. REMPE I. INTRODUCTION AND SUMMARY The committee met in Washington on September 16 and 17 to review progress in the program with respect to a changed set of mission priorities. Our last meeting took place in December 2002 after the reorganization that had placed the Advanced Fuel Cycle Initiative (AFCI) and the GEN IV program together in the Advanced Nuclear Research Office (AN-20). Since mission priorities have been evolving, the committee felt that it should wait until they have settled down before we met again. We have kept in touch

380

Anco Advance | Open Energy Information  

Open Energy Info (EERE)

Anco Advance Anco Advance Jump to: navigation, search Name Anco Advance Place Longmont, Colorado Zip 80503 Sector Renewable Energy Product Focused on the delivery and operation of profitable renewable waste to energy plants. Coordinates 40.16394°, -105.100504° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":40.16394,"lon":-105.100504,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

Note: This page contains sample records for the topic "jim francfort advanced" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Energy Programs | Advanced Storage Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Storage Systems Advanced Storage Systems Tapping Into Fuel Cells and Batteries Page 1 of 2 Imagine being able to drive a forty-mile round-trip commute every day without ever going near a gas pump. As the United States moves towards an energy economy with reduced dependence on foreign oil and fewer carbon emissions, development of alternative fuel sources and transmission of the energy they provide is only part of the equation. An increase in energy generated from intermittent renewable sources and the growing need for mobile energy will require new, efficient means of storing it, and technological advancements will be necessary to support the nation's future energy storage needs. A change toward alternative transportation - hydrogen fuel-cell vehicles, hybrid electric vehicles, plug-in hybrid-electric vehicles and electric

382

Advanced Manufacturing | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Advanced Manufacturing Advanced Manufacturing Advanced Manufacturing EERE leads a robust network of researchers and other partners to continually develop cost-effective energy-saving solutions that help make our country run better through increased efficiency — promoting better plants, manufacturing processes, and products; more efficient new homes and improved older homes; and other solutions to enhance the buildings in which we work, shop, and lead our everyday lives. EERE leads a robust network of researchers and other partners to continually develop cost-effective energy-saving solutions that help make our country run better through increased efficiency - promoting better plants, manufacturing processes, and products; more efficient new homes and improved older homes; and other solutions to enhance the buildings in which

383

Video Library | Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

Media Center: Media Center: Calendar of Events APS News User News Article Archives APS Brochure Annual Reports Posters Podcasts Image Gallery external site Video Library Syndicated Feeds (RSS) Featured Videos: Introduction to the Advanced Photon Source The Advanced Photon Source An introduction and overview of the technology that produces the brightest x-ray beams in the Western Hemisphere, and the research carried out by scientists using those x-rays. Timelapse of the APS construction Building the APS A timelapse video from 1990-1995 that shows the Advanced Photon Source rising from an empty field to become the site of a national synchrotron x-ray research facility. Physics of the Blues Physics of the Blues In looking at commonalities between music and science, former PSC Director

384

Process for producing advanced ceramics  

DOE Patents (OSTI)

A process for the synthesis of homogeneous advanced ceramics such as SiC+AlN, SiAlON, SiC+Al.sub.2 O.sub.3, and Si.sub.3 N.sub.4 +AlN from natural clays such as kaolin, halloysite and montmorillonite by an intercalation and heat treatment method. Included are the steps of refining clays, intercalating organic compounds into the layered structure of clays, drying the intercalated mixture, firing the treated atmospheres and grinding the loosely agglomerated structure. Advanced ceramics produced by this procedure have the advantages of homogeneity, cost effectiveness, simplicity of manufacture, ease of grind and a short process time. Advanced ceramics produced by this process can be used for refractory, wear part and structure ceramics.

Kwong, Kyei-Sing (Tuscaloosa, AL)

1996-01-01T23:59:59.000Z

385

Building Technologies Office: Advancing Building Energy Codes  

NLE Websites -- All DOE Office Websites (Extended Search)

Building Energy Codes Building Energy Codes Printable Version Share this resource Send a link to Building Technologies Office: Advancing Building Energy Codes to someone by E-mail Share Building Technologies Office: Advancing Building Energy Codes on Facebook Tweet about Building Technologies Office: Advancing Building Energy Codes on Twitter Bookmark Building Technologies Office: Advancing Building Energy Codes on Google Bookmark Building Technologies Office: Advancing Building Energy Codes on Delicious Rank Building Technologies Office: Advancing Building Energy Codes on Digg Find More places to share Building Technologies Office: Advancing Building Energy Codes on AddThis.com... Popular Links Success Stories Previous Next Lighten Energy Loads with System Design. Warming Up to Pump Heat.

386

Advanced Modeling & Simulation | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Advanced Modeling & Simulation Advanced Modeling & Simulation Advanced Modeling & Simulation Advanced Modeling & Simulation ADVANCING THE STATE OF THE ART Innovation advances science. Historically, innovation resulted almost exclusively from fundamental theories combined with observation and experimentation over time. With advancements in engineering, computing power and visualization tools, scientists from all disciplines are gaining insights into physical systems in ways not possible with traditional approaches alone. Modeling and simulation has a long history with researchers and scientists exploring nuclear energy technologies. In fact, the existing fleet of currently operating reactors was licensed with computational tools that were produced or initiated in the 1970s. Researchers and scientists in

387

untitled  

NLE Websites -- All DOE Office Websites (Extended Search)

Idaho National Laboratory Update on Idaho National Laboratory Update on DE FOA 000667 Wireless Charging for w.inl.gov DE-FOA-000667 Wireless Charging for Electric Vehicles Jim Francfort Brent Warr www Brent Warr Richard Carlson CERV 2013 Park City, Utah February 2013 Presentation Outline * INL and Vehicle Technology Experience * Conductive Charging Deployment Lessons-Learned That Transfer Directly to Wireless Deployment y p y * DOE-FOA-000667 Wireless Charging for Electric Vehicles * Conductive Efficiency? - It depends on where you measure it: 23% to 99.7% * INL Testing Equipment and Facilities 2 2 INL and Vehicle Technology Experience 3 Idaho National Laboratory Bio-mass Bio-mass Nuclear Hydropower Hydropower Wind Wind * U.S. Department of Energy (DOE) laboratory * 890 square mile site with 4,000 staff * Support DOE's strategic goal:

388

Alternative Fuels Data Center: Advanced Biofuel Incentives  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Advanced Biofuel Advanced Biofuel Incentives to someone by E-mail Share Alternative Fuels Data Center: Advanced Biofuel Incentives on Facebook Tweet about Alternative Fuels Data Center: Advanced Biofuel Incentives on Twitter Bookmark Alternative Fuels Data Center: Advanced Biofuel Incentives on Google Bookmark Alternative Fuels Data Center: Advanced Biofuel Incentives on Delicious Rank Alternative Fuels Data Center: Advanced Biofuel Incentives on Digg Find More places to share Alternative Fuels Data Center: Advanced Biofuel Incentives on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Advanced Biofuel Incentives The North Dakota Industrial Commission's Renewable Energy Program provides matching grants and other forms of assistance to support research and

389

ADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING  

E-Print Network (OSTI)

The components of a modern Advanced Boiling Water Reactor (ABWR) nuclear power plant are modeled in this thesis) is a single-cycle, forced circulation, light-water nuclear reactor designed by the General Electric Company better control of the nuclear reaction in the fuel core. 2.1 Modifications to the BWR [1] · The reactor

Mitchell, John E.

390

Advancing Energy Systems through Integration  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Advancing Energy Systems Advancing Energy Systems through Integration Presented in partnership with the United States Department of Energy November 20, 2012 Webinar Community Renewable Energy Success Stories: District Heating with Renewable Energy Saint Paul's Community Energy System * Underground network of pipes aggregate heating and cooling needs * Aggregated thermal loads allows application of technologies and fuels not feasible for individual buildings * Increases fuel flexibility, rate stability, and reliability Community Scale Heating and Cooling 4 ever-greenenergy.com Ever-Green Energy Integrated Energy System flexible & renewable fuel sources reliable and effective production & storage hot & chilled water loops maximize energy conservation & reliability

391

TECHNOLOGIES TO OPTIMIZE ADVANCED TOKAMAK  

SciTech Connect

OAK-B135 Commercial fusion power systems must operate near the limits of the engineering systems and plasma parameters. Achieving these objectives will require real time feedback control of the plasma. This paper describes plasma control systems being used in the national DIII-D advanced tokamak research program.

SIMONEN, TC

2004-01-01T23:59:59.000Z

392

Advanced Research Robert R. Romanosky  

E-Print Network (OSTI)

Collins Ferry Road P.O. Box 880 Morgantown, WV 26507-0880 304-285-4132 heino.beckert@netl.doe.gov Coal advanced, cost-effective mercury control technologies for coal-fired power plants. Anticipating new Federal (ORNL) have investigated bioleaching of mercury (Hg) from coal by using iron and sulfur

393

Gas fired Advanced Turbine System  

SciTech Connect

The primary objective of the first phase of the Advanced Gas Turbine System (ATS) program was the concept definition of an advanced engine system that meets efficiency and emission goals far exceeding those that can be provided with today`s equipment. The thermal efficiency goal for such an advanced industrial engine was set at 50% some 15 percentage points higher than current equipment levels. Exhaust emissions goals for oxides of nitrogen (NO{sub x}), carbon monoxide (CO), and unburned hydrocarbons (UH) were fixed at 8 parts per million by volume (ppmv), 20 ppmv, and 20 ppmv respectively, corrected to 15% oxygen (O{sub 2}) levels. Other goals had to be addressed; these involved reducing the cost of power produced by 10 percent and improving or maintaining the reliability, availability, and maintainability (RAM) at current levels. This advanced gas turbine was to be fueled with natural gas, and it had to embody features that would allow it bum coal or coal derived fuels.

LeCren, R.T.; White, D.J.

1993-01-01T23:59:59.000Z

394

ADVANCED GAS TURBINE SYSTEMS RESEARCH  

SciTech Connect

The activities of the Advanced Gas Turbine Systems Research (AGTSR) program for this reporting period are described in this quarterly report. The report is divided into discussions of Membership, Administration, Technology Transfer (Workshop/Education), Research and Miscellaneous Related Activity. Items worthy of note are presented in extended bullet format following the appropriate heading.

Unknown

2002-02-01T23:59:59.000Z

395

ADVANCED GAS TURBINE SYSTEMS RESEARCH  

SciTech Connect

The activities of the Advanced Gas Turbine Systems Research (AGRSR) program are described in the quarterly report. The report is divided into discussions of Membership, Administration, Technology Transfer (Workshop/Education) and Research. Items worthy of note are presented in extended bullet format following the appropriate heading.

Unknown

2000-01-01T23:59:59.000Z

396

Gatan Solarus Advanced Plasma System  

Science Conference Proceedings (OSTI)

The Solarus Advanced Plasma System expands this process to a new level. ... electronics and software; which when integrated allows more control and .... Ar, Ni, or Ar/O2 at 60psi (4.1bar) required for operation of pneumatic valve. Power.

397

Advanced Fuels Campaign 2012 Accomplishments  

Science Conference Proceedings (OSTI)

The Advanced Fuels Campaign (AFC) under the Fuel Cycle Research and Development (FCRD) program is responsible for developing fuels technologies to support the various fuel cycle options defined in the DOE Nuclear Energy Research and Development Roadmap, Report to Congress, April 2010. The fiscal year 2012 (FY 2012) accomplishments are highlighted below. Kemal Pasamehmetoglu is the National Technical Director for AFC.

Not Listed

2012-11-01T23:59:59.000Z

398

ADVANCED GAS TURBINE SYSTEMS RESEARCH  

SciTech Connect

The activities of the Advanced Gas Turbine Systems Research (AGTSR) program for this reporting period are described in this quarterly report. The report is divided into discussions of Membership, Administration, Technology Transfer (Workshop/Education), Research and Miscellaneous Related Activity. Items worthy of note are presented in extended bullet format following the appropriate heading.

Unknown

2002-04-01T23:59:59.000Z

399

Advanced Manufacturing Office: Industrial Assessment Centers (IACs)  

NLE Websites -- All DOE Office Websites (Extended Search)

Industrial Assessment Industrial Assessment Centers (IACs) to someone by E-mail Share Advanced Manufacturing Office: Industrial Assessment Centers (IACs) on Facebook Tweet about Advanced Manufacturing Office: Industrial Assessment Centers (IACs) on Twitter Bookmark Advanced Manufacturing Office: Industrial Assessment Centers (IACs) on Google Bookmark Advanced Manufacturing Office: Industrial Assessment Centers (IACs) on Delicious Rank Advanced Manufacturing Office: Industrial Assessment Centers (IACs) on Digg Find More places to share Advanced Manufacturing Office: Industrial Assessment Centers (IACs) on AddThis.com... Industrial Assessment Centers (IACs) Learn More Learn how companies have benefited from IAC assessments. Search the IAC Database for recommendations and savings achieved.

400

Advanced Simulation Capability for Environmental Management (ASCEM) |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Advanced Simulation Capability for Environmental Management (ASCEM) Advanced Simulation Capability for Environmental Management (ASCEM) Advanced Simulation Capability for Environmental Management (ASCEM) Advanced Simulation Capability for Environmental Management (ASCEM) ASCEM is being developed to provide a tool and approach to facilitate robust and standardized development of performance and risk assessments for cleanup and closure activities throughout the EM complex. The ASCEM team is composed of scientists from eight National Laboratories. This team is leveraging Department of Energy (DOE) investments in basic science and applied research including high performance computing codes developed through the Advanced Scientific Computing Research and Advanced Simulation & Computing programs as well as collaborating with the Offices of Science,

Note: This page contains sample records for the topic "jim francfort advanced" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Advanced Leds | Open Energy Information  

Open Energy Info (EERE)

Leds Leds Jump to: navigation, search Name Advanced Leds Place Coventry, England, United Kingdom Zip CV5 6SP Product Advanced Leds develops LED technology for outdoor lighting, including street lighting applications. Coordinates 44.866737°, -72.263927° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":44.866737,"lon":-72.263927,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

402

APS Upgrade | Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

Workshop on new science opportunities provided by a multi-bend achromat lattice at the APS APS-U MBA Lattice Workshop Registration is now closed. Please contact Diane Wilkinson ext. 7810 or a member of the Workshop Organizing Committee for changes or modifications to your registration. Submit Comments, Suggestions, and Ideas for MBA Lattice Workshop October 21-22 Advanced Photon Source Argonne National Lab The Advanced Photon Source Upgrade is focused on delivering a powerful, versatile facility for science using high-brightness, high-energy X-rays. At APS, and around the light source community, scientists have been developing storage ring designs that push closer to the ultimate diffraction limit for X-ray sources. A recent report by the Basic Energy Sciences Advisory Committee, which advises the Director of the U.S.

403

Recent advances in ordered intermetallics  

SciTech Connect

This paper briefly summarizes recent advances in intermetallic research and development. Ordered intermetallics based on aluminides and silicides possess attractive properties for structural applications at elevated temperatures in hostile environments; however, brittle fracture and poor fracture resistance limit their use as engineering materials in many cases. In recent years, considerable efforts have been devoted to the study of the brittle fracture behavior of intermetallic alloys; as a result, both intrinsic and extrinsic factors governing brittle fracture have been identified. Recent advances in first-principles calculations and atomistic simulations further help us in understanding atomic bonding, dislocation configuration, and alloying effects in intermetallics. The basic understanding has led to the development of nickel, iron, and titanium aluminide alloys with improved mechanical and metallurgical properties for structural use. Industrial interest in ductile intermetallic alloys is high, and several examples of industrial involvement are mentioned.

Liu, C.T.

1992-12-31T23:59:59.000Z

404

Advanced batteries for electric vehicles  

SciTech Connect

The idea of battery-powered vehicles is an old one that took on new importance during the oil crisis of 1973 and after California passed laws requiring vehicles that would produce no emissions (so-called zero-emission vehicles). In this overview of battery technologies, the authors review the major existing or near-term systems as well as advanced systems being developed for electric vehicle (EV) applications. However, this overview does not cover all the advanced batteries being developed currently throughout the world. Comparative characteristics for the following batteries are given: lead-acid; nickel/cadmium; nickel/iron; nickel/metal hydride; zinc/bromine; sodium/sulfur; sodium/nickel chloride; zinc/air; lithium/iron sulfide; and lithium-polymer.

Henriksen, G.L.; DeLuca, W.H.; Vissers, D.R. (Argonne National Lab., IL (United States))

1994-11-01T23:59:59.000Z

405

Advanced Metering Infrastructure Security Objects  

Science Conference Proceedings (OSTI)

With the widespread deployment of large-scale Advanced Metering Infrastructure (AMI) systems, utilities must address the task of managing the alarms and events that are generated by the meters. However, AMI systems do not easily integrate into Security Information and Event Management (SIEM) systems and Intrusion Detection Systems (IDSs) due to the fact that AMI vendors do not use standard data objects for representing the alarms and events that are generated by the meters. This project addresses ...

2012-12-28T23:59:59.000Z

406

Advanced Energy | Open Energy Information  

Open Energy Info (EERE)

Name Advanced Energy Name Advanced Energy Address 1625 Sharp Point Drive Place Fort Collins, Colorado Zip 80525 Sector Solar Product Solar cell, passive-solar architectural glass, solar grid-tie inverter, semiconductor, flat panel display, data storage Year founded 1981 Number of employees 1001-5000 Website http://www.advanced-energy.com Coordinates 40.565708°, -105.030749° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":40.565708,"lon":-105.030749,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

407

Building Technologies Office: Advanced Energy Design Guides  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Design Energy Design Guides to someone by E-mail Share Building Technologies Office: Advanced Energy Design Guides on Facebook Tweet about Building Technologies Office: Advanced Energy Design Guides on Twitter Bookmark Building Technologies Office: Advanced Energy Design Guides on Google Bookmark Building Technologies Office: Advanced Energy Design Guides on Delicious Rank Building Technologies Office: Advanced Energy Design Guides on Digg Find More places to share Building Technologies Office: Advanced Energy Design Guides on AddThis.com... About Take Action to Save Energy Activities 179d Tax Calculator Advanced Energy Design Guides Advanced Energy Retrofit Guides Building Energy Data Exchange Specification Buildings Performance Database Data Centers Energy Asset Score Energy Modeling Software

408

Advanced Vehicle Testing Activity: Oil Bypass Filter  

NLE Websites -- All DOE Office Websites (Extended Search)

Oil Bypass Filter to someone by E-mail Share Advanced Vehicle Testing Activity: Oil Bypass Filter on Facebook Tweet about Advanced Vehicle Testing Activity: Oil Bypass Filter on...

409

EERE: Advanced Manufacturing Office Home Page  

NLE Websites -- All DOE Office Websites (Extended Search)

Office Site Map Printable Version Share this resource Send a link to EERE: Advanced Manufacturing Office Home Page to someone by E-mail Share EERE: Advanced Manufacturing Office...

410

NETL: Turbine Projects - Advanced Coal Power Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Coal Power Systems Turbine Projects Advanced Coal Power Systems SOFC Hybrid System for Distributed Power Generation DataFact Sheets SOFC Hybrid System PDF In-House FCT...

411

Advanced Coal Wind Hybrid: Economic Analysis  

E-Print Network (OSTI)

2008. Annual Report on US Wind Power Installation, Cost,Feed Sequestration Site Wind Power Figure ES-1. AdvancedFeed Sequestration Site Wind Power Figure 1. Advanced-Coal

Phadke, Amol

2008-01-01T23:59:59.000Z

412

ORNL NASA DAAC Announces Advanced Search  

NLE Websites -- All DOE Office Websites (Extended Search)

New Release of Mercury Advanced Search Tool The ORNL NASA DAAC is pleased to announce the public release of the new version of our Mercury Advanced Search tool. Mercury is a...

413

Emerging Global Trends in Advanced Manufacturing  

Science Conference Proceedings (OSTI)


2013-07-31T23:59:59.000Z

414

The Advanced Manufacturing Technology Consortia (AMTech ...  

Science Conference Proceedings (OSTI)

... Advanced Manufacturing National Program Office National Institute of Standards ... Management (SAM) are required ... Clarifications to budget items ...

2013-08-21T23:59:59.000Z

415

Components for Advanced Power Conditioning Techniques  

Science Conference Proceedings (OSTI)

Symposium, Advanced Materials for Power Electronics, Power Conditioning, and Power Conversion ... Potential Ceramic Dielectrics for Air Force Applications.

416

Geothermal: Sponsored by OSTI -- Advanced Electric Submersible...  

NLE Websites -- All DOE Office Websites (Extended Search)

GEOTHERMAL TECHNOLOGIES LEGACY COLLECTION - Sponsored by OSTI -- Advanced Electric Submersible Pump Design Tool for Geothermal Applications Geothermal Technologies Legacy...

417

Conference on Advances in Materials Science - Presentations ...  

National Nuclear Security Administration (NNSA)

- Presentations Home > About Us > Our Programs > Defense Programs > Future Science & Technology Programs > Office of Advanced Simulation and Computing Institutional Research...

418

Measurement Science Needs for Advancing Infrastructure ...  

Science Conference Proceedings (OSTI)


2012-10-30T23:59:59.000Z

419

Advanced Materials Technologies Available for Licensing ...  

Advanced Materials Technologies Available for Licensing U.S. Department of Energy (DOE) laboratories and participating research institutions have ...

420

Grand Challenges for Advanced Photovoltaic Technologies ...  

Science Conference Proceedings (OSTI)


2012-09-07T23:59:59.000Z

Note: This page contains sample records for the topic "jim francfort advanced" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Advanced Encryption Standard Algorithm Validation List  

Science Conference Proceedings (OSTI)

Advanced Encryption Standard Algorithm Validation List. Last Update: 8/28/2013. The page provides technical information ...

422

Advanced Green Petroleum Coke Calcination In Electrothermal ...  

Science Conference Proceedings (OSTI)

Symposium, Fluidization Technologies for the Mineral, Materials, and Energy Industries. Presentation Title, Advanced Green Petroleum Coke Calcination In...

423

Fact Sheet: Energy Storage Technology Advancement Partnership...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Fact Sheet: Energy Storage Technology Advancement Partnership (October 2012) More Documents & Publications Webinar Presentation: Energy Storage Solutions for Microgrids (November...

424

Advanced Materials for Energy Conversion III  

Science Conference Proceedings (OSTI)

Nov 1, 2006 ... Print Book: Handbook of Environmental Degradation of Materials ... Advanced Materials; Characterization; Fundamentals; High-Temperature...

425

Integrating ORNL Assets to Enable Advanced Manufacturing  

Neutron science and technology Materials science and engineering ... Spallation Neutron Source Carbon Fiber Technology Center Center for Advanced

426

Advanced Material Development, Processing and Characterization  

The patented suite of Advanced Material Development, Processing and Characterization offers armor structures to prevent unauthorized entry or ...

427

Clean Cities: Advanced Vehicle Technology Competitions  

NLE Websites -- All DOE Office Websites (Extended Search)

Partnerships National Clean Fleets Partnership National Parks Initiative Electric Vehicle Infrastructure Training Program Advanced Vehicle Technology Competitions Natural Gas...

428

Solar Energy, Modeling, and Advanced Materials  

Science Conference Proceedings (OSTI)

Oct 21, 2010 ... Clean Energy: Fuel Cells, Batteries, Renewables - Materials, Processing, and Manufacturing: Solar Energy, Modeling, and Advanced Materials

429

Material Science Advances Using Test Reactor Facilities  

Science Conference Proceedings (OSTI)

Aug 2, 2010 ... About this Symposium. Meeting, 2011 TMS Annual Meeting & Exhibition. Symposium, Material Science Advances Using Test Reactor Facilities.

430

Green Technologies Enhanced by Recent Advances in ...  

Science Conference Proceedings (OSTI)

An advance in the fundamental physics of energy, thermodynamics, quantum relationships, and electromagnetic waves has occurred recently, however.

431

Advanced Titanium Powder Processing - Additive Layer ...  

Science Conference Proceedings (OSTI)

Symposium, Cost Affordable Titanium IV. Presentation Title, Advanced Titanium Powder Processing - Additive Layer Manufacturing (ALM) and Metal Injection...

432

Advanced Energy Technologies: Solar Energy and Storage  

Science Conference Proceedings (OSTI)

Advanced Energy Technologies: Solar Energy and Storage (+18 FTE, +$7,500,000). image: Shutterstock, copyright Chayne Gregg. Challenge. ...

2011-10-11T23:59:59.000Z

433

DOE Hydrogen Analysis Repository: Advanced Vehicle Introduction...  

NLE Websites -- All DOE Office Websites (Extended Search)

Keywords: Vehicle characteristics; market penetration; advanced technology vehicles; hybrid electric vehicle (HEV) Purpose Vehicle Choice Model - Estimate market penetration...

434

Advances in Hydroelectric Turbine Manufacturing and Repair  

Science Conference Proceedings (OSTI)

About this Symposium. Meeting, Materials Science & Technology 2013. Symposium, Advances in Hydroelectric Turbine Manufacturing and Repair. Sponsorship...

435

Idaho Site Advances Recovery Act Cleanup after Inventing Effective Treatment  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

April 14, 2011 April 14, 2011 IDAHO FALLS, Idaho - For the first time in history, workers at the Idaho site achieved success in the initial cleanup of potentially dangerous sodium in a de- commissioned nuclear reactor using an innovative treatment process. The Ameri- can Recovery and Reinvestment Act invested $70 million in the project, which employs 130 workers. DOE officials cheered the outcome and praised the team that designed and imple- mented the innovative sodium treatment for which the DOE has filed a provisional patent application. "We're proud of our team for creating a unique solution to safely rid the Experi- mental Breeder Reactor-II of this highly reactive sodium before we demolish it," DOE Idaho Cleanup Project Assistant Manager Jim Cooper said. "Our workers

436

advanced vehicle technologies awards table | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

advanced vehicle technologies awards table advanced vehicle technologies awards table Microsoft Word - VTP 175 Advanced Vehicle Tech project descriptions draft v5 8-2-11 More...

437

GM's Perspective on Advanced Biofuels | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

GM's Perspective on Advanced Biofuels GM's Perspective on Advanced Biofuels Bioufuels GM GM's Perspective on Advanced Biofuels More Documents & Publications Algae Biofuels...

438

EA-1940: Proposed Federal Loan Guarantee for Montana Advanced...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

40: Proposed Federal Loan Guarantee for Montana Advanced Biofuels EA-1940: Proposed Federal Loan Guarantee for Montana Advanced Biofuels SUMMARY Montana Advanced Biofuels (MAB)...

439

PIA - Advanced Test Reactor National Scientific User Facility...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Advanced Test Reactor National Scientific User Facility Users Week 2009 PIA - Advanced Test Reactor National Scientific User Facility Users Week 2009 PIA - Advanced Test Reactor...

440

Advanced wind turbine design studies: Advanced conceptual study. Final report  

DOE Green Energy (OSTI)

In conjunction with the US Department of Energy and the National Renewable Energy Laboratory`s Advanced Wind Turbine Program, the Atlantic Orient Corporation developed preliminary designs for the next generation of wind turbines. These 50 kW and 350 kW turbines are based upon the concept of simplicity. By adhering to a design philosophy that emphasizes simplicity, we project that these turbines will produce energy at extremely competitive rates which will unlock the potential of wind energy domestically and internationally. The program consisted of three distinct phases. First, we evaluated the operational history of the Enertech 44 series wind turbines. As a result of this evaluation, we developed, in the second phase, a preliminary design for a new 50 kW turbine for the near-term market. In the third phase, we took a clean-sheet-of-paper approach to designing a 350 kW turbine focused on the mid-1990s utility market that incorporated past experience and advanced technology.

Hughes, P.; Sherwin, R. [Atlantic Orient Corp., Norwich, VT (United States)

1994-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "jim francfort advanced" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

NREL: Advanced Power Electronics - Research and Development  

NLE Websites -- All DOE Office Websites (Extended Search)

Research and Development Research and Development The Advanced Power Electronics activity focuses on the electric drive system for hybrid electric and fuel cell vehicles. At NREL, we research and develop electronic components and systems that will overcome major technical barriers to commercialization of hybrid, advanced internal combustion, and fuel cell vehicle technologies. Researchers focus on developing advanced power electronics and electric machinery technologies that improve reliability, efficiency, and ruggedness, and dramatically decrease systems costs for advanced vehicles. To accomplish this, the power electronics team investigates cooling and heating of advanced vehicles by looking at the thermal management of motor controllers, inverters, and traction motors with one- and two-phase cooling

442

Advanced Energy Fund | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Advanced Energy Fund Advanced Energy Fund Advanced Energy Fund < Back Eligibility Commercial Industrial Institutional Residential Utility Savings Category Bioenergy Commercial Heating & Cooling Manufacturing Buying & Making Electricity Alternative Fuel Vehicles Hydrogen & Fuel Cells Water Wind Solar Heating & Cooling Heating Water Heating Program Info State Ohio Program Type Public Benefits Fund Provider Ohio Development Services Agency Ohio's Advanced Energy Fund was originally authorized by the state's 1999 electric restructuring legislation. The Fund supports the Advanced Energy Program, which at different times has provided grants for renewable energy and energy efficiency projects to different economic sectors. Grant and loan funds are awarded through periodic Notices of Funding Availability

443

Human gene sequencing makes advances  

SciTech Connect

The Human Genome Project is a federal project that is on the scale of the Manhattan Project of the 1940s. The focus of this project is to map and sequence the 100,000 plus genes and 3 billion base pairs that comprise the human genome. This effort has made two recent advances. First, two of the major companies involved in this project formed a strategic alliance that will pump up to 125 million dollars into this project. Second, researchers at Argonne National Lab. have tested a new sequencing technique that could identify 100 million base pairs a day when fully implemented.

Alper, J.

1993-09-01T23:59:59.000Z

444

Mirror Advanced Reactor Study (MARS)  

DOE Green Energy (OSTI)

Progress in a two year study of a 1200 MWe commercial tandem mirror reactor (MARS - Mirror Advanced Reactor Study) has reached the point where major reactor system technologies are identified. New design features of the magnets, blankets, plug heating systems and direct converter are described. With the innovation of radial drift pumping to maintain low plug density, reactor recirculating power fraction is reduced to 20%. Dominance of radial ion and impurity losses into the halo permits gridless, circular direct converters to be dramatically reduced in size. Comparisons of MARS with the Starfire tokamak design are made.

Logan, B.G.

1983-03-28T23:59:59.000Z

445

Advanced engineering environment pilot project.  

SciTech Connect

The Advanced Engineering Environment (AEE) is a concurrent engineering concept that enables real-time process tooling design and analysis, collaborative process flow development, automated document creation, and full process traceability throughout a product's life cycle. The AEE will enable NNSA's Design and Production Agencies to collaborate through a singular integrated process. Sandia National Laboratories and Parametric Technology Corporation (PTC) are working together on a prototype AEE pilot project to evaluate PTC's product collaboration tools relative to the needs of the NWC. The primary deliverable for the project is a set of validated criteria for defining a complete commercial off-the-shelf (COTS) solution to deploy the AEE across the NWC.

Schwegel, Jill; Pomplun, Alan R.; Abernathy, Rusty (Parametric Technology Corporation, Needham, MA)

2006-10-01T23:59:59.000Z

446

Advanced House Framing | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Advanced House Framing Advanced House Framing Advanced House Framing April 13, 2012 - 7:57pm Addthis Two-story home using advanced framing techniques. Two-story home using advanced framing techniques. Advanced house framing means materials, labor, and heating and cooling cost savings because the approach: Uses less lumber and generates less waste than typical framing methods. Increases energy efficiency by replacing lumber with insulation material, resulting in a higher whole-wall R-value through reduced thermal bridging and increased insulation. How does it work? Advanced framing works structurally by aligning framing members directly over each other to transfer the load from roof trusses or rafters to second floor wall studs, to floor joists, to first floor studs to the foundation,

447

Advanced Reactor Technology Documents | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Nuclear Reactor Technologies » Advanced Reactor Nuclear Reactor Technologies » Advanced Reactor Technologies » Advanced Reactor Technology Documents Advanced Reactor Technology Documents January 30, 2013 Advanced Reactor Concepts Technical Review Panel Report This report documents the establishment of a technical review process and the findings of the Advanced Reactor Concepts (ARC) Technical Review Panel (TRP).1 The intent of the process is to identify R&D needs for viable advanced reactor concepts in order to inform DOE-NE R&D investment decisions. A goal of the process is to facilitate greater engagement between DOE and industry. The process involved establishing evaluation criteria, conducting a pilot review, soliciting concept inputs from industry entities, reviewing the concepts by TRP members and compiling the

448

DOE's Advanced Turbine Systems Program  

Science Conference Proceedings (OSTI)

This paper discusses the Advanced Turbine Systems (ATS) Program, which is necessary to achieve METC's vision for future IGCC systems. This major new program is a cooperative effort in which DOE's Office of Fossil Energy (FE) and Office of Conservation and Renewable Energy (CE) are joining forces with the private sector to develop ultra-high efficiency gas turbine systems. A goal of this Program is to have a utility-size gas turbine with a 60 percent efficiency (lower heating value basis (LHV)) ready for commercialization by the year 2002. (While this paper focuses on utility-size turbines which are the primary interest of this audience, an ultra-high efficiency, industrial-size gas turbine will also be developed in the ATS Program with a comparable improvement in efficiency.) Natural gas is the target fuel of the Program, a recognition by DOE that natural gas will play a significant role in supplying future power generation needs in the US. However, to insure that the US has fuel supply options, ATS designs will be adaptable to coal and biomass fuels. Therefore, the ATS Program will directly benefit IGCC and other advanced coal based power generation systems. Cost and efficiency improvements in the turbine system as well as in the gasification and gas stream cleanup plant sections will enable IGCC to reach a cost target of $1,000--$1,280/kW and an efficiency goal of 52 percent (higher heating value basis (HHV)) in the post-2000 market.

Bechtel, T.F.; Bajura, R.A.; Salvador, L.A.

1993-01-01T23:59:59.000Z

449

Advanced Vehicle Testing and Evaluation  

SciTech Connect

The objective of the United States (U.S.) Department of Energy?s (DOEs) Advanced Vehicle Testing and Evaluation (AVTE) project was to provide test and evaluation services for advanced technology vehicles, to establish a performance baseline, to determine vehicle reliability, and to evaluate vehicle operating costs in fleet operations. Vehicles tested include light and medium-duty vehicles in conventional, hybrid, and all-electric configurations using conventional and alternative fuels, including hydrogen in internal combustion engines. Vehicles were tested on closed tracks and chassis dynamometers, as well as operated on public roads, in fleet operations, and over prescribed routes. All testing was controlled by procedures developed specifically to support such testing. Testing and evaluations were conducted in the following phases: ? Development of test procedures, which established testing procedures; ? Baseline performance testing, which established a performance baseline; ? Accelerated reliability testing, which determined vehicle reliability; ? Fleet testing, used to evaluate vehicle economics in fleet operation, and ? End of test performance evaluation. Test results are reported by two means and posted by Idaho National Laboratory (INL) to their website: quarterly progress reports, used to document work in progress; and final test reports. This final report documents work conducted for the entirety of the contract by the Clarity Group, Inc., doing business as ECOtality North America (ECOtality). The contract was performed from 1 October 2005 through 31 March 2013. There were 113 light-duty on-road (95), off-road (3) and low speed (15) vehicles tested.

Garetson, Thomas

2013-03-31T23:59:59.000Z

450

Advanced turbine systems program overview  

SciTech Connect

The US Department of Energy`s (DOE) Office of Fossil Energy and Office of Energy Efficiency & Renewable Energy are jointly supporting a program to develop Advanced Turbine Systems (ATS). Demonstrations of commercial prototypes will be completed by the year 2000 for both utility- and industrial-scale applications. The program is primarily directed toward natural gas utilization, but eventual application of the technology to coal-fired systems is not overlooked. In major procurements, contractors are required to address (in paper studies though not in testing) the eventual adaptation of their systems to coal firing. Implementation of the program is proceeding well. Phase 1 systems studies have been completed, and Phase 2 concept development has been underway for about a year. Release of solicitation for Phase 3 proposals has been announced for July, 1994. This phase of the program will see teams led by turbine manufacturers move into full scale testing of critical components. Generic research and development has been proceeding in parallel with the major development effort. METC has started testing in their Advanced Turbine Combustion test facility, and Oak Ridge National Laboratory has initiated a materials test program. The industry/university consortium established by the South Carolina Energy Research and Development Center has completed their second round of university awards, with 23 university projects now underway.

Webb, H.A.

1994-10-01T23:59:59.000Z

451

Evaluation of Oil Bypass Filter Technology on Heavy-Duty Vehicles  

NLE Websites -- All DOE Office Websites (Extended Search)

(Advanced Vehicle Testing Activity) (Advanced Vehicle Testing Activity) Evaluation of Oil Bypass Filter Technology on Heavy-Duty Vehicles James Francfort American Filtration and Separations Society April 2005 Presentation Outline * Background & Objectives * Oil bypass filters - features & reported benefits * INL testing method * puraDYN oil bypass filters * Refined Global Solutions (RGS) oil bypass filters * Testing results & trends * Particulate and ferrography testing * Initial INL Oil Bypass Filter Economics * Potential fleet oil savings * Testing Status Bypass Filter Evaluation - Background * Funded by the U.S. Department of Energy's FreedomCAR & Vehicle Technologies Program (Advanced Vehicle Testing Activity) * Vehicles operated by Idaho National Laboratory's Fleet Operations group * Idaho National Laboratory

452

Alternative Fuels Data Center: Advanced Transportation Tax Exclusion  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Advanced Advanced Transportation Tax Exclusion to someone by E-mail Share Alternative Fuels Data Center: Advanced Transportation Tax Exclusion on Facebook Tweet about Alternative Fuels Data Center: Advanced Transportation Tax Exclusion on Twitter Bookmark Alternative Fuels Data Center: Advanced Transportation Tax Exclusion on Google Bookmark Alternative Fuels Data Center: Advanced Transportation Tax Exclusion on Delicious Rank Alternative Fuels Data Center: Advanced Transportation Tax Exclusion on Digg Find More places to share Alternative Fuels Data Center: Advanced Transportation Tax Exclusion on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Advanced Transportation Tax Exclusion The California Alternative Energy and Advanced Transportation Financing

453

Nano-Optics, Plasmonics, and Advanced Materials Workshop  

Science Conference Proceedings (OSTI)

Nano-Optics, Plasmonics, and Advanced Materials Workshop. ... Agenda- Workshop-on-Nano-OpticsPlasmonics-and-AdvancedMaterials_v16. ...

2013-06-27T23:59:59.000Z

454

Advanced Vehicles Group: Center for Transportation Technologies and Systems  

DOE Green Energy (OSTI)

Describes R&D in advanced vehicle systems and components (e.g., batteries) by NREL's Advanced Vehicles Group.

Not Available

2008-08-01T23:59:59.000Z

455

Advanced Conductive Coating Performance under Long-term SOFC ...  

Science Conference Proceedings (OSTI)

A Slag Management System for Gasification Operations Advanced Conductive Coating Performance under Long-term SOFC Operating Conditions Advanced...

456

Siemens Westinghouse Advanced Turbine Systems Program Final Summary  

NLE Websites -- All DOE Office Websites (Extended Search)

development concentrated on the following areas: aerodynamic design, combustion, heat transfercooling design, engine mechanical design, advanced alloys, advanced coating...

457

Advanced Coal Conversion Process Demonstration  

NLE Websites -- All DOE Office Websites (Extended Search)

Clean Coal Technology Program Clean Coal Technology Program Advanced Coal Conversion Process Demonstration A DOE Assessment DOE/NETL-2005/1217 U.S. Department of Energy Office of Fossil Energy National Energy Technology Laboratory April 2005 2 Disclaimer This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference therein to any specific commercial product, process, or service by trade name,

458

Advanced Neutron Source enrichment study  

SciTech Connect

A study has been performed of the impact on performance of using low enriched uranium (20% {sup 235}U) or medium enriched uranium (35% {sup 235}U) as an alternative fuel for the Advanced Neutron Source, which is currently designed to use uranium enriched to 93% {sup 235}U. Higher fuel densities and larger volume cores were evaluated at the lower enrichments in terms of impact on neutron flux, safety, safeguards, technical feasibility, and cost. The feasibility of fabricating uranium silicide fuel at increasing material density was specifically addressed by a panel of international experts on research reactor fuels. The most viable alternative designs for the reactor at lower enrichments were identified and discussed. Several sensitivity analyses were performed to gain an understanding of the performance of the reactor at parametric values of power, fuel density, core volume, and enrichment that were interpolations between the boundary values imposed on the study or extrapolations from known technology.

Bari, R.A.; Ludewig, H.; Weeks, J.R.

1994-12-31T23:59:59.000Z

459

Why We Ventilate - Recent Advances  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

WHY WE VENTILATE: WHY WE VENTILATE: Recent Advances Max Sherman BA Stakeholders meeting ASHRAE BIO  Distinguished Lecturer  Exceptional Service Award  Board of Directors; TechC  Chair of committees:  62.2; Standards Committee  TC 4.3; TC 2.5  Holladay Distinguished Fellow OVERVIEW QUESTIONS  What is Ventilation? What is IAQ?  What functions does it provide?  How much do we need? Why?  How should ventilations standards be made? LBL has working on these problems Who Are You?  Engineers (ASHRAE Members & not);  architects,  contractors,  reps,  builders,  vendors,  code officials WHAT IS VENTILATION  Medicine: To Exchange Air In the Lungs  Latin: Ventilare, "to expose to the wind"  Today: To Bring In Outdoor Air And Replace

460

NREL: Advanced Power Electronics - Publications  

NLE Websites -- All DOE Office Websites (Extended Search)

Publications Publications The National Renewable Energy Laboratory and its partners have produced many papers and presentations related to the Advanced Power Electronics project. For more information about the following documents, contact Sreekant Narumanchi. Software Spray System Evaluation (Software 1.1 MB) Papers 2013 Steady and Unsteady Air Impingement Heat Transfer for Electronics Cooling Applications Paper Source: Arik, M.; Sharma, R.; Lustbader, J.; He, X. (2013). Article No. 111009. Journal of Heat Transfer. Vol. 135(11), November 2013; 8 pp.; NREL Report No. JA-5400-56618. http://dx.doi.org/10.1115/1.4024614 Pool Boiling Heat Transfer Characteristics of HFO-1234yf on Plain and Microporous-Enhanced Surfaces Paper Source: Moreno, G.; Narumanchi, S.; King, C. (2013). Article No. 111014.

Note: This page contains sample records for the topic "jim francfort advanced" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

APS News | Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

APS News Archives: APS News Archives: 2012 | 2011 | 2010 | 2009 2008 | 2007 | 2006 | 2005 2004 | 2003 | 2002 | 2001 2000 Subscribe to APS News rss feed APS News Kim of ASD Awarded 2014 Wilson Prize for Achievement in Physics of Particle Accelerators Kim of ASD Awarded 2014 Wilson Prize for Achievement in Physics of Particle Accelerators January 7, 2014 Kwang-Je Kim of the Advanced Photon Source has been named the recipient of the 2014 Robert R. Wilson Prize for Achievement in the Physics of Particle Accelerators, Harkay of ASD Elected to Fellowship in the American Physical Society Harkay of ASD Elected to Fellowship in the American Physical Society December 18, 2013 Katherine Harkay of the Accelerator Systems Division has been elected to Fellowship in the American Physical Society for

462

Detectors (XSD) | Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

APS Detector Pool (X-ray Science Division) The Detector Pool provides many different types of x-ray detectors to beamline scientists at the Advanced Photon Source. These detectors are made available for short term loans (typically several days to a week or two, but this is flexible). The detector pool also coordinates loans between sectors, helps sectors repair equipment, and coordinates group purchases. Depending on budgets, we purchase new equipment, based largely on suggestions from the beamline scientists. Requests for detectors are submitted by beamline scientists at the sectors on behalf of general users. General Users are free to contact us regarding detector capabilities and other questions. The Detector Pool is staffed during normal working hours,

463

Illinois Center for Advanced Tribology  

NLE Websites -- All DOE Office Websites (Extended Search)

t t r i b o l o g y Health and BioTribology A virtual center that brings together the skills and talents of multiple investigators and unique facilities from Argonne National Laboratory and three partnering universities to resolve critical friction, wear, and lubrication issues in Biomedical Implants, Alternative Energy Technologies, and Extreme Environments. The Center's tribology experts will work closely with industry, and with state and federal agencies through jointly funded research projects, to perform leading-edge research on the impact of materials, coatings, and fluids on energy efficiency, durability, and reliability. The work will culminate in the development of * Advanced models of the fundamental mechanisms responsible for friction and wear,

464

Advanced Scientific Computing Research Jobs  

Office of Science (SC) Website

about/jobs/ Below is a list of currently about/jobs/ Below is a list of currently open federal employment opportunities in the Office of Science. Prospective applicants should follow the links to the formal position announcements on USAJOBS.gov for more information. en {D1C7BEC4-D6F9-4FB7-A95E-142A6B699F6B}https://www.usajobs.gov/GetJob/ViewDetails/358465200 Computer Scientist Computer Science Research & Partnerships Division Job Title: Computer Scientist Computer Science Research & Partnerships DivisionOffice: Advanced Scientific Computing ResearchURL: USAjobs listingVacancy Number: 14-DE-SC-HQ-005Location:

465

Advanced gray rod control assembly  

DOE Patents (OSTI)

An advanced gray rod control assembly (GRCA) for a nuclear reactor. The GRCA provides controlled insertion of gray rod assemblies into the reactor, thereby controlling the rate of power produced by the reactor and providing reactivity control at full power. Each gray rod assembly includes an elongated tubular member, a primary neutron-absorber disposed within the tubular member said neutron-absorber comprising an absorber material, preferably tungsten, having a 2200 m/s neutron absorption microscopic capture cross-section of from 10 to 30 barns. An internal support tube can be positioned between the primary absorber and the tubular member as a secondary absorber to enhance neutron absorption, absorber depletion, assembly weight, and assembly heat transfer characteristics.

Drudy, Keith J; Carlson, William R; Conner, Michael E; Goldenfield, Mark; Hone, Michael J; Long, Jr., Carroll J; Parkinson, Jerod; Pomirleanu, Radu O

2013-09-17T23:59:59.000Z

466

Advanced fuel concepts and applications  

DOE Green Energy (OSTI)

Despite their more stringent plasma heating and confinement requirements, advanced fuel (AF) fusion cycles potentially offer improved environmental compatibility and lower costs. This comes about by elimination of tritium breeding requirements and by a reduction in neutron flux (hence, activation and radiation damage). Also a larger energy fraction carried by charged particles makes direct energy conversion more suitable. As a first application, a symbiotic system of semi-catalyzed-deuterium fueled hybrid fuel factories, supplying both fissle fuel to light water reactors and /sup 3/He to D-/sup 3/He satellite fusion reactors, is proposed. Subsequently, an evolution into a system of synfuel factories with satellite D-/sup 3/He reactors is envisioned.

Miley, G.H.

1981-01-01T23:59:59.000Z

467

Advanced Fuels Campaign Execution Plan  

SciTech Connect

The purpose of the Advanced Fuels Campaign (AFC) Execution Plan is to communicate the structure and management of research, development, and demonstration (RD&D) activities within the Fuel Cycle Research and Development (FCRD) program. Included in this document is an overview of the FCRD program, a description of the difference between revolutionary and evolutionary approaches to nuclear fuel development, the meaning of science-based development of nuclear fuels, and the Grand Challenge for the AFC that would, if achieved, provide a transformational technology to the nuclear industry in the form of a high performance, high reliability nuclear fuel system. The activities that will be conducted by the AFC to achieve success towards this grand challenge are described and the goals and milestones over the next 20 to 40 year period of research and development are established.

Kemal Pasamehmetoglu

2010-10-01T23:59:59.000Z

468

Advanced Fuels Campaign Execution Plan  

SciTech Connect

The purpose of the Advanced Fuels Campaign (AFC) Execution Plan is to communicate the structure and management of research, development, and demonstration (RD&D) activities within the Fuel Cycle Research and Development (FCRD) program. Included in this document is an overview of the FCRD program, a description of the difference between revolutionary and evolutionary approaches to nuclear fuel development, the meaning of science-based development of nuclear fuels, and the 'Grand Challenge' for the AFC that would, if achieved, provide a transformational technology to the nuclear industry in the form of a high performance, high reliability nuclear fuel system. The activities that will be conducted by the AFC to achieve success towards this grand challenge are described and the goals and milestones over the next 20 to 40 year period of research and development are established.

Kemal Pasamehmetoglu

2011-09-01T23:59:59.000Z

469

Modern Imaging Technology: Recent Advances  

SciTech Connect

This 2-day conference is designed to bring scientist working in nuclear medicine, as well as nuclear medicine practitioners together to discuss the advances in four selected areas of imaging: Biochemical Parameters using Small Animal Imaging, Developments in Small Animal PET Imaging, Cell Labeling, and Imaging Angiogenesis Using Multiple Modality. The presentations will be on molecular imaging applications at the forefront of research, up to date on the status of molecular imaging in nuclear medicine as well as in related imaging areas. Experts will discuss the basic science of imaging techniques, and scheduled participants will engage in an exciting program that emphasizes the current status of molecular imaging as well as the role of DOE funded research in this area.

Welch, Michael J.; Eckelman, William C.

2004-06-18T23:59:59.000Z

470

Advanced Fuels Campaign Execution Plan  

SciTech Connect

The purpose of the Advanced Fuels Campaign (AFC) Execution Plan is to communicate the structure and management of research, development, and demonstration (RD&D) activities within the Fuel Cycle Research and Development (FCRD) program. Included in this document is an overview of the FCRD program, a description of the difference between revolutionary and evolutionary approaches to nuclear fuel development, the meaning of science-based development of nuclear fuels, and the 'Grand Challenge' for the AFC that would, if achieved, provide a transformational technology to the nuclear industry in the form of a high performance, high reliability nuclear fuel system. The activities that will be conducted by the AFC to achieve success towards this grand challenge are described and the goals and milestones over the next 20 to 40 year period of research and development are established.

Kemal Pasamehmetoglu

2011-09-01T23:59:59.000Z

471

Advanced Patent Waivers | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Services » Technology Transfer and Procurement » Technology Services » Technology Transfer and Procurement » Technology Transfer & Intellectual Property » Patent Waivers Overview » Advanced Patent Waivers Advanced Patent Waivers June 26, 2008 Advance Patent Waiver W(A)2008-007 This is a request by SCHOTT NORTH AMERICA, INC. for a DOE waiver of domestic and foreign patent rights under agreement DE-FG36-07GO17001 May 6, 2008 Advance Patent Waiver W(A)2008-004 This is a request by HUNTSMAN ADVANCED MATERIALS AMERICANS, INC. for a DOE waiver of domestic and foreign patent rights under agreement DE-FG36-07GO17012 February 26, 2008 Advance Patent Waiver W(A)2007-015 This is a request by UNITED TECHNOLOGIES CORP for a DOE waiver of domestic and foreign patent rights under agreement DE-FC26-07NT43055 February 8, 2008

472

Categorical Exclusion Determinations: Advanced Research Projects  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Advanced Research Projects Advanced Research Projects Agency-Energy Categorical Exclusion Determinations: Advanced Research Projects Agency-Energy Categorical Exclusion Determinations issued by Advanced Research Projects Agency-Energy. DOCUMENTS AVAILABLE FOR DOWNLOAD June 10, 2013 CX-010529: Categorical Exclusion Determination Electroalcoholgenesis CX(s) Applied: B3.6 Date: 06/10/2013 Location(s): South Carolina, Washington Offices(s): Advanced Research Projects Agency-Energy May 23, 2013 CX-010566: Categorical Exclusion Determination Massachusetts Institute of Technology- Scalable, Self-Powered Purification Technology for Brackish and Heavy Metal Contaminated Water CX(s) Applied: B3.6 Date: 05/23/2013 Location(s): Massachusetts Offices(s): Advanced Research Projects Agency-Energy May 22, 2013

473

Advanced Manufacturing Office: MotorMaster+  

NLE Websites -- All DOE Office Websites (Extended Search)

MotorMaster+ to MotorMaster+ to someone by E-mail Share Advanced Manufacturing Office: MotorMaster+ on Facebook Tweet about Advanced Manufacturing Office: MotorMaster+ on Twitter Bookmark Advanced Manufacturing Office: MotorMaster+ on Google Bookmark Advanced Manufacturing Office: MotorMaster+ on Delicious Rank Advanced Manufacturing Office: MotorMaster+ on Digg Find More places to share Advanced Manufacturing Office: MotorMaster+ on AddThis.com... MotorMaster+ This photo shows the inner workings of an industrial electric motor with gears. In the lower left hand corner are the words "MotorMaster+" and underneath are the words "Motor-Driven Systems." Download MotorMaster+ now! Version: 4.01.01 Release Date: September 21, 2010 Release Notes Metric Unit Measurements: No

474

NETL: Advanced Research - Sensors & Controls Innovations  

NLE Websites -- All DOE Office Websites (Extended Search)

Sensors & Controls Sensors & Controls Advanced Research Sensors & Controls Innovations OSU's O2 Sensor Ohio State University's reference-free potentiometric oxygen sensor capable of withstanding temperatures of 800 °C. Novel Sensors and Advanced Process Control Novel Sensors and Advanced Process Control are key enabling technologies for advanced near zero emission power systems. NETL's Advanced Research Program is leading the effort to develop sensing and control technologies and methods to achieve seamless, integrated, automated, optimized, and intelligent power systems. Today, the performance of advanced power systems is limited by the lack of sensors and controls capable of withstanding high temperature and pressure conditions. Harsh environments are inherent to new systems that aim to

475

Advanced thermally stable jet fuels  

Science Conference Proceedings (OSTI)

The Pennsylvania State University program in advanced thermally stable coal-based jet fuels has five broad objectives: (1) Development of mechanisms of degradation and solids formation; (2) Quantitative measurement of growth of sub-micrometer and micrometer-sized particles suspended in fuels during thermal stressing; (3) Characterization of carbonaceous deposits by various instrumental and microscopic methods; (4) Elucidation of the role of additives in retarding the formation of carbonaceous solids; (5) Assessment of the potential of production of high yields of cycloalkanes by direct liquefaction of coal. Future high-Mach aircraft will place severe thermal demands on jet fuels, requiring the development of novel, hybrid fuel mixtures capable of withstanding temperatures in the range of 400--500 C. In the new aircraft, jet fuel will serve as both an energy source and a heat sink for cooling the airframe, engine, and system components. The ultimate development of such advanced fuels requires a thorough understanding of the thermal decomposition behavior of jet fuels under supercritical conditions. Considering that jet fuels consist of hundreds of compounds, this task must begin with a study of the thermal degradation behavior of select model compounds under supercritical conditions. The research performed by The Pennsylvania State University was focused on five major tasks that reflect the objectives stated above: Task 1: Investigation of the Quantitative Degradation of Fuels; Task 2: Investigation of Incipient Deposition; Task 3: Characterization of Solid Gums, Sediments, and Carbonaceous Deposits; Task 4: Coal-Based Fuel Stabilization Studies; and Task 5: Exploratory Studies on the Direct Conversion of Coal to High Quality Jet Fuels. The major findings of each of these tasks are presented in this executive summary. A description of the sub-tasks performed under each of these tasks and the findings of those studies are provided in the remainder of this volume (Sections 1 through 5).

Schobert, H.H.

1999-01-31T23:59:59.000Z

476

Advanced evacuated tubular concentrator research  

SciTech Connect

Previous research projects led to the conceptual development and proof-of-concept of an advanced evacuated concentrating solar collector tube. The basic idea involves the integration of a nonimaging Compound Parabolic Concentrator (CPC) inside an evacuated tube and coupled to a spectrally selective absorber. An experimental panel of these tubes achieved the highest operating efficiency at high temperatures ever measured with a non-tracking stationary solar collector. Subsequent studies have indicated that a mass-producible collector, incorporating the same concepts, can be developed which will deliver excellent performance across a broad range of temperatures, extending from about 50{degrees}C (suitable for domestic hot water and space heating) to well above 200{degrees}C (suitable for space cooling, process steam and many other end uses). Some form of advanced Integrated CPC (ICPC) remains the only simple and effective method for delivering solar thermal energy efficiently throughout the temperature range from 50{degrees}C to about 300{degrees}C without tracking. It has the potential to make practical and economical several cooling technologies which are otherwise not viable. In addition to its potential for driving cooling systems, this technology also provides a highly versatile solar source for virtually all thermal end uses including general purpose space and domestic hot water heating as well as industrial process heat. Research efforts have been directed towards designing and prototyping a manufacturable version of such a collector tube. We have been pursuing several paths. These include: (1) a small tube version, 52mm in diameter, based on the use of the T-17 commercially produced fluorescent glass tubing, which is the largest size lamp tubing produced in high volume in the United States, and (2) a large tube version, 125mm in diameter, compatible with the commercial design manufactured until recently by Corning France (the CORTEC collector).

Winston, R.; O'Gallagher, J.J.

1992-06-01T23:59:59.000Z

477

Oxidation of advanced steam turbine alloys  

SciTech Connect

Advanced or ultra supercritical (USC) steam power plants offer the promise of higher efficiencies and lower emissions. Current goals of the U.S. Department of Energys Advanced Power Systems Initiatives include coal generation at 60% efficiency, which would require steam temperatures of up to 760C. This research examines the steamside oxidation of advanced alloys for use in USC systems, with emphasis placed on alloys for high- and intermediate-pressure turbine sections.

Holcomb, G.R.; Covino, B.S., Jr.; Bullard, S.J.; Ziomek-Moroz, M.

2006-03-01T23:59:59.000Z

478

Advanced Pulverizer Control: Design and Testbed Implementation  

Science Conference Proceedings (OSTI)

Coal pulverizers play an important role in all aspects of power plant performance, including availability, efficiency, and responsiveness. In relationship to dynamic response, pulverizer control often limits a plant's maximum load rate-of-change. EPRI has been investigating the use of advanced multivariable control techniques on several plant subsystems and in this project is developing an advanced pulverizer control system. The ultimate goal is to design, implement, and test an advanced control system o...

2004-03-22T23:59:59.000Z

479

CALIFORNIA ENERGY Integrated Ceiling Research Report  

E-Print Network (OSTI)

for advanced ceiling systems that: · Provides excellent lighting and daylighting quality, thermal comfort McConocha of Federated Departments, JimVan Dame of My-Lite Daylighting Systems and Products, Doug Departments, JimVan Dame of My-Lite Daylighting Systems and Products, Doug Gehring of Celotex, Ivan Johnson

480

Advanced Manufacturing Jobs and Innovation Accelerator Challenge |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Technical Assistance » Advanced Manufacturing Jobs and Innovation Technical Assistance » Advanced Manufacturing Jobs and Innovation Accelerator Challenge Advanced Manufacturing Jobs and Innovation Accelerator Challenge October 10, 2013 - 12:01pm Addthis The Advanced Manufacturing Jobs and Innovation Accelerator Challenge (Accelerator) is a multi-agency sponsored competition established to enhance existing regional networks of firms and institutions that accelerate technology-related innovation, business formation, and job creation. Funding provided to these regional networks (also called clusters) help academia, utilities, local governments, and private industry and investors expand partnerships, share strategic information more efficiently, and reduce costs by leveraging existing assets and resources (like physical facilities and equipment).

Note: This page contains sample records for the topic "jim francfort advanced" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

NIST Advanced Technology Program Launches 54 New ...  

Science Conference Proceedings (OSTI)

... a real contribution to the technological advances that fuel our economy.". ... the potential to spark important, broad-based economic benefits for the ...

2012-12-13T23:59:59.000Z

482

Property:AdvancedEconomy | Open Energy Information  

Open Energy Info (EERE)

AdvancedEconomy AdvancedEconomy Jump to: navigation, search This is a property of type Boolean. Pages using the property "AdvancedEconomy" Showing 25 pages using this property. (previous 25) (next 25) A Afghanistan + false + Albania + false + Algeria + false + Andorra + false + Angola + false + Anguilla + false + Antigua and Barbuda + false + Argentina + false + Armenia + false + Aruba + false + Australia + true + Austria + true + Azerbaijan + false + B Bahamas + false + Bahrain + false + Bangladesh + false + Barbados + false + Belarus + false + Belgium + true + Belize + false + Benin + false + Bermuda + false + Bhutan + false + Bolivia + false + Bosnia and Herzegovina + false + (previous 25) (next 25) Retrieved from "http://en.openei.org/w/index.php?title=Property:AdvancedEconomy&oldid=282067#SMWResults"

483

Advanced Materials Facilities & Capabilites | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Research Highlights Research Highlights Facilities and Capabilities Science to Energy Solutions News & Awards Events and Conferences Supporting Organizations Advanced Materials Home | Science & Discovery | Advanced Materials | Facilities and Capabilities SHARE Facilities and Capabilities ORNL has resources that together provide a unique environment for Advanced Materials Researchers. ORNL hosts two of the most advanced neutron research facilities in the world, the Spallation Neutron Source (SNS) and the High Flux Isotope Reactor (HFIR). In addition, the Center for Nanophase Materials Sciences offers world-class capabilities and expertise for nanofabrication, scanning probe microscopy, chemical and laser synthesis, spectroscopy, and computational modeling and their. The ORNL

484

Westinghouse Advanced Reactors Division Plutonium Fuel Laboratories  

Office of Legacy Management (LM)

ADVANCED REACTORS DIVISION FUEL LABORATORIES CHESWICK, PENNSYLVANIA Department of Energy Office of Policy, Safety and Environment Office of Operational Safety Environmental...

485

Advanced Metallic Materials: Technological Exploitation of ...  

Science Conference Proceedings (OSTI)

Deformation Mechanism for Macroscopic Ductility of Advanced Materials Effect of Lead and Bismuth Additions on the Machinability of Yellow Brass Alloys.

486

Advanced Solar Technologies Inc | Open Energy Information  

Open Energy Info (EERE)

Inc Jump to: navigation, search Name Advanced Solar Technologies Inc Place San Diego, California Sector Solar Product California-based domestic and commercial designer and...

487

Measuring Advances in HVAC Distribution System Design  

E-Print Network (OSTI)

Gabel and Andresen, HVAC Secondary Toolkil. Atlanta: ASHRAE,P_02 Measuring Advances in HVAC Distribution System Designdesign and operation of the HVAC thermal distribution system

Franconi, E.

2011-01-01T23:59:59.000Z

488

Advanced Materials Success Stories - Energy Innovation Portal  

Advanced Materials Success Stories These success stories highlight some of the effective licensing and partnership activity between laboratories and industry in the ...

489

New Advances - Jefferson Lab Technology Transfer  

New Advances Commercial Spin-offs Abound For New Free Electron Laser. The world of laser technology took a giant leap forward recently as researchers ...

490

NETL: 2009 Conference Proceedings - Advanced Process Engineering...  

NLE Websites -- All DOE Office Websites (Extended Search)

Development PRESENTATIONS APECS Overview Advanced Process Engineering Co-Simulation for Design and Optimization of Fossil Energy Systems with Carbon Capture PDF-4MB Stephen E....

491

Advanced Controls Technologies and Strategies Linking Energy...  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Controls Technologies and Strategies Linking Energy Efficiency and Demand Response Speaker(s): Sila Kiliccote Date: October 6, 2005 - 12:00pm Location: Bldg. 90 Reliable...

492

Advanced Manufacturing Office: State and Regional Partnerships  

NLE Websites -- All DOE Office Websites (Extended Search)

on State Policies that Impact Industrial Energy Efficiency In order to reduce industrial energy intensity and use, the Advanced Manufacturing Office (AMO) is forming partnerships...

493

Advanced Vehicle Testing Activity: Other Internal Combustion...  

NLE Websites -- All DOE Office Websites (Extended Search)

Other Internal Combustion Engine Vehicles The Advanced Vehicle Testing Activity (AVTA) is tasked by the U.S. Department of Energy's (DOE) Vehicle Technology Office (VTO) to conduct...

494

Advanced Materials for Our Energy Future - TMS  

Science Conference Proceedings (OSTI)

May 21, 2010 ... TMS has joined forces with four other materials societies to develop Advanced Materials for Our Energy Future, a publication that underscores...

495

NETL Publications: Stakeholder Workshop for Advanced Sensing...  

NLE Websites -- All DOE Office Websites (Extended Search)

National Energy Technology Laboratory Presentation PDF-5.34MB U.S. DOE Office of Fossil Energy Overview Regis Conrad, Advanced Research Program Manager Presentation...

496

advanced vehicles | OpenEI Community  

Open Energy Info (EERE)

(TCDB) advanced vehicles electric generation NREL OpenEI renewables tcdb This new web application collects cost and performance estimates and makes it available to everyone...

497

Advanced Vehicle Testing Activity: Chevrolet Silverado Hybrid...  

NLE Websites -- All DOE Office Websites (Extended Search)

Chevrolet Silverado Hybrid Electric Vehicle Accelerated Reliability Testing - April 2009 to someone by E-mail Share Advanced Vehicle Testing Activity: Chevrolet Silverado Hybrid...

498

Definition: Advanced Metering Infrastructure | Open Energy Information  

Open Energy Info (EERE)

search Dictionary.png Advanced Metering Infrastructure A system of smart meters, two-way communications networks, and data management systems implemented to enable metering and...

499

NIST Creates Center for Advanced Materials Research  

Science Conference Proceedings (OSTI)

Jun 25, 2013 ... The planned center, which NIST expects to fund at approximately $25 million ... and data and informatics tools related to advanced materials.

500

Chemical Sciences Division | Advanced Materials |ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

at the fluid-solid interface that will enable transformative advances in electrical energy storage and catalysis. The division also provides analytical support and leadership...