National Library of Energy BETA

Sample records for jane summerson print

  1. Jane Capital Partners | Open Energy Information

    Open Energy Info (EERE)

    search Logo: Jane Capital Partners Name: Jane Capital Partners Address: 505 Montgomery, 2nd Floor Place: San Francisco, California Zip: 94111 Region: Bay Area Product:...

  2. Sarah Jane Maxted | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Jane Maxted About Us Sarah Jane Maxted - Special Assistant, Office of Energy Efficiency & Renewable Energy Sarah Jane Maxted leads Innovation Efforts as Special Assistant in the Office of Energy Efficiency and Renewable Energy. Most Recent U-Launch Winner Secures $2.4M Investment for Building Energy Performance Software December 14 Calling all Young Entrepreneurs: Deadline for Energy Department Business Plan Competition Approaching December 1 Saving Energy: The Next Generation Nov

  3. 2013 Federal Energy and Water Management Award Winners Corrine Kegel, Jane

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    A. Kipp, and Dale Reckley | Department of Energy Corrine Kegel, Jane A. Kipp, and Dale Reckley 2013 Federal Energy and Water Management Award Winners Corrine Kegel, Jane A. Kipp, and Dale Reckley PDF icon fewm13_usda_regionone_montana_highres.pdf PDF icon fewm13_usda_regionone_montana.pdf More Documents & Publications Federal Energy and Water Management Award Guy Lunay, Kevin Myles, Cullen Rabel, Elizabeth Taylor, Mark Trimarchi 2013 Federal Energy and Water Management Award Winners Dale

  4. Browse by Discipline -- E-print Network Subject Pathways: Geosciences...

    Office of Scientific and Technical Information (OSTI)

    of Chemistry, Ohio State University Dyson, Jane (Jane Dyson) - Department of Molecular Biology, Scripps Research Institute Go back to Individual Researchers Collections: A B C D ...

  5. Printing | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Printing Printing The Printing Team is the liaison between the U.S. Government Printing Office and the Department of Energy. It consists of an expert group of printing specialists who offer a full range of services from assistance in developing your printing requirements to the final printing, distribution and mailing of products. The printed products range from black and white to full color items. These Services are available through the Working Capital Fund. The Printing Office produces a

  6. World's First Printed Car

    SciTech Connect (OSTI)

    Rogers, Jay

    2015-06-03

    Local Motors partnered with ORNL to print the worlds first 3D-printed car (Strati) at the 2014 International Manufacturing Technology Show.

  7. Compact organic vapor jet printing print head

    DOE Patents [OSTI]

    Forrest, Stepehen R; McGraw, Gregory

    2015-01-27

    A first device is provided. The first device includes a print head, and a first gas source hermetically sealed to the print head. The print head further includes a first layer further comprising a plurality of apertures, each aperture having a smallest dimension of 0.5 to 500 microns. A second layer is bonded to the first layer. The second layer includes a first via in fluid communication with the first gas source and at least one of the apertures. The second layer is made of an insulating material.

  8. Compact organic vapor jet printing print head

    DOE Patents [OSTI]

    Forrest, Stephen R; McGraw, Gregory

    2013-12-24

    A first device is provided. The first device includes a print head, and a first gas source hermetically sealed to the print head. The print header further includes a first layer comprising a plurality of apertures, each aperture having a smallest dimension of 0.5 to 500 microns. A second layer is bonded to the first layer. The second layer includes a first via in fluid communication with the first gas source and at least one of the apertures. The second layer is made of an insulating material.

  9. Jane Powell

    Broader source: Energy.gov [DOE]

    Team Leader, Financial, Audits, and Contracts Services Team Ms. Powell has more than 30 years of experience with the U.S. Department of Energy (DOE), under multiple regulatory regimes,...

  10. Organic vapor jet printing system

    DOE Patents [OSTI]

    Forrest, Stephen R

    2012-10-23

    An organic vapor jet printing system includes a pump for increasing the pressure of an organic flux.

  11. Organic vapor jet printing system

    DOE Patents [OSTI]

    Forrest, Stephen R.

    2016-05-03

    An organic vapor jet printing system includes a pump for increasing the pressure of an organic flux.

  12. Government Printing Office Requirements | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Government Printing Office Requirements Government Printing Office Requirements This section describes the Government Printing Office (GPO) requirements for all print materials, whether printed electronically or on paper. This includes requirements for printing and copying for all EERE publications. Approved Printers Executive Order 12873, signed by President Clinton, requires that all government offices and their contractors are required to use GPO-approved printers to print and copy all

  13. Sintering Kinetics of Inkjet Printed...

    Office of Scientific and Technical Information (OSTI)

    circuits for functional applications envisioned by automotive and aerospace industries. ... Figure 1 illustrates the types of printed line instabilities generally encountered when ...

  14. Template:PrintPDFButton | Open Energy Information

    Open Energy Info (EERE)

    PrintPDFButton Jump to: navigation, search This is the PrintPDFButton template. It is intended for inclusion on any page where printing the page contents to a PDF is desirable....

  15. Printed Module Interconnects

    SciTech Connect (OSTI)

    Stockert, Talysa R.; Fields, Jeremy D.; Pach, Gregory F.; Mauger, Scott A.; van Hest, Maikel F. A. M.

    2015-06-14

    Monolithic interconnects in photovoltaic modules connect adjacent cells in series, and are typically formed sequentially involving multiple deposition and scribing steps. Interconnect widths of 500 um every 10 mm result in 5% dead area, which does not contribute to power generation in an interconnected solar panel. This work expands on previous work that introduced an alternative interconnection method capable of producing interconnect widths less than 100 um. The interconnect is added to the module in a single step after deposition of the photovoltaic stack, eliminating the need for scribe alignment. This alternative method can be used for all types of thin film photovoltaic modules. Voltage addition with copper-indium-gallium-diselenide (CIGS) solar cells using a 2-scribe printed interconnect approach is demonstrated. Additionally, interconnect widths of 250 um are shown.

  16. Aluminum plasmonic metamaterials for structural color printing...

    Office of Scientific and Technical Information (OSTI)

    Aluminum plasmonic metamaterials for structural color printing Citation Details In-Document Search Title: Aluminum plasmonic metamaterials for structural color printing Authors: ...

  17. SciTech Connect: "3d printing"

    Office of Scientific and Technical Information (OSTI)

    3d printing" Find + Advanced Search Term Search Semantic Search Advanced Search All Fields: "3d printing" Semantic Semantic Term Title: Full Text: Bibliographic Data: Creator ...

  18. Widget:PrintPDFButton | Open Energy Information

    Open Energy Info (EERE)

    Dependencies Template:PrintPDFButton Usage This Widget assumes the existence of HTML elements created by the PrintPDFButton template, and is called via that template....

  19. SolarPrint | Open Energy Information

    Open Energy Info (EERE)

    search Name: SolarPrint Place: Dublin, Ireland Sector: Solar Product: Irish solar cell manufacturer. The company developed DSSC technology. References: SolarPrint1 This...

  20. Pennsylvania Company Develops Solar Cell Printing Technology

    Broader source: Energy.gov [DOE]

    The technology uses Plextronics’ conductive inks that can be printed by manufacturers worldwide to make solar cells, potentially as easily as they might print a newspaper.

  1. printed-circuit heat exchanger PCHE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    printed-circuit heat exchanger PCHE - Sandia Energy Energy Search Icon Sandia Home ... SunShot Grand Challenge: Regional Test Centers printed-circuit heat exchanger PCHE Home...

  2. Detection of latent prints by Raman imaging

    DOE Patents [OSTI]

    Lewis, Linda Anne; Connatser, Raynella Magdalene; Lewis, Sr., Samuel Arthur

    2011-01-11

    The present invention relates to a method for detecting a print on a surface, the method comprising: (a) contacting the print with a Raman surface-enhancing agent to produce a Raman-enhanced print; and (b) detecting the Raman-enhanced print using a Raman spectroscopic method. The invention is particularly directed to the imaging of latent fingerprints.

  3. Add your e-prints to the E-print Network -- Energy, science,...

    Office of Scientific and Technical Information (OSTI)

    Add E-prints: eprintshelp@osti.gov We invite you to submit your e-prints to the network. Having your e-prints in the network increases awareness of them and promotes the ...

  4. Minutes from the Print and Mail Managers Exchange Forum Teleconference...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Minutes from the Print and Mail Managers Exchange Forum Teleconferences Minutes from the Print and Mail Managers Exchange Forum Teleconferences Minutes from the Print and Mail...

  5. The United States Code - Printing, Title 44 Excerpts | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The United States Code - Printing, Title 44 Excerpts The United States Code - Printing, Title 44 Excerpts The United States Code - Printing, Title 44 Excerpts PDF icon The United ...

  6. PIA - Savannah River Operations Office File and Print Services...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    File and Print Services PIA - Savannah River Operations Office File and Print Services PIA - Savannah River Operations Office File and Print Services PDF icon PIA - Savannah River ...

  7. High resolution printing of charge

    DOE Patents [OSTI]

    Rogers, John; Park, Jang-Ung

    2015-06-16

    Provided are methods of printing a pattern of charge on a substrate surface, such as by electrohydrodynamic (e-jet) printing. The methods relate to providing a nozzle containing a printable fluid, providing a substrate having a substrate surface and generating from the nozzle an ejected printable fluid containing net charge. The ejected printable fluid containing net charge is directed to the substrate surface, wherein the net charge does not substantially degrade and the net charge retained on the substrate surface. Also provided are functional devices made by any of the disclosed methods.

  8. Heat sinking for printed circuitry

    DOE Patents [OSTI]

    Wilson, S.K.; Richardson, G.; Pinkerton, A.L.

    1984-09-11

    A flat pak or other solid-state device mounted on a printed circuit board directly over a hole extends therethrough so that the bottom of the pak or device extends beyond the bottom of the circuit board. A heat sink disposed beneath the circuit board contacts the bottom of the pak or device and provides direct heat sinking thereto. Pressure may be applied to the top of the pak or device to assure good mechanical and thermal contact with the heat sink.

  9. Field Facilities Contacts for Printing and Mail

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Field Facilities Contacts for Printing and Mail Print and Mail Contacts Site Printing Contact Mail Contact NNSA, Albuquerque Deborah Miller (505) 845-6049 Thomas H. Clinkenbeard NNSA Service Center PO Box 5400 Albuquerque, NM 87185-5400 (505) 845-4602 tclinkenbeard@doeal.gov (mailto:tclinkenbeard@doeal.gov) Argonne National Laboratory Doreen Schoening Argonne National Laboratory U.S. Department of Energy 9700 South Cass Avenue Blvd 340 Lemonmt, IL 60439 (630) 840-6399 dschoening@anl.gov

  10. Print

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Conversa con tus padres sobre los termostatos digitales y programables. Conversa con tus padres sobre el mejoramiento del hogar para ahorrar energa (ventanas, puertas y techos). ...

  11. Print

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    maneras fciles de usar energa en forma inteligente Apaga las luces. Marca la caja. Apaga tu computadora. Usa bombillas de alta eficiencia energtica. Desenchufa los cargadores...

  12. Print

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    < 5k 0 < 50k < 100k < 250k < 500k < 1M > 1M > 5M > 10M DE MD DC MA RI NJ AZ UT WY ID OR WA CA TX OK KS CO NE SD ND MN WI IL IA MO AR LA MS AL FL GA TN KY IN OH MI ME NH CT VT NY PA WV VA NC SC MT AK HI NV NM Princeton Plasma Physics Laboratory Procured Materials and Services 2015 (> $35M) Small business procurements in US: $14.73M

  13. Print

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    water vapor. - For more information on CMBE: http:science.arm.govwgcpmscmbestestimate.html GFDL GCM models used in this comparison - AM2.1: current version of the...

  14. Printed circuit dispersive transmission line

    DOE Patents [OSTI]

    Ikezi, Hiroyuki (Rancho Santa Fe, CA); Lin-Liu, Yuh-Ren (San Diego, CA); DeGrassie, John S. (Encinitas, CA)

    1991-01-01

    A printed circuit dispersive transmission line structure is disclosed comprising an insulator, a ground plane formed on one surface of the insulator, a first transmission line formed on a second surface of the insulator, and a second transmission line also formed on the second surface of the insulator and of longer length than the first transmission line and periodically intersecting the first transmission line. In a preferred embodiment, the transmission line structure exhibits highly dispersive characteristics by designing the length of one of the transmission line between two adjacent periodic intersections to be longer than the other.

  15. Printed circuit dispersive transmission line

    DOE Patents [OSTI]

    Ikezi, H.; Lin-Liu, Y.R.; DeGrassie, J.S.

    1991-08-27

    A printed circuit dispersive transmission line structure is disclosed comprising an insulator, a ground plane formed on one surface of the insulator, a first transmission line formed on a second surface of the insulator, and a second transmission line also formed on the second surface of the insulator and of longer length than the first transmission line and periodically intersecting the first transmission line. In a preferred embodiment, the transmission line structure exhibits highly dispersive characteristics by designing the length of one of the transmission line between two adjacent periodic intersections to be longer than the other. 5 figures.

  16. Mac OS X Printing with LPD

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Mac OS X Printing with LPD Last Modified by Jerry Camuso, 02/12/2015. 1 . From the "System Preferences", click on "Print & Fax" 2 . Click on "+" sign to add a new printer 3. Use "IP Printer" and select or type the following: Protocol: Line Printer Daemon - LPD Address: printserv.slac.stanford.edu Queue: Your print queue name from SLAC printserv. PLEASE NOTE: this information can be found at the bottom of this document Under "SSRL beamline print

  17. Toppan Printing Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    Co Ltd Jump to: navigation, search Name: Toppan Printing Co Ltd Place: Tokyo, Tokyo, Japan Zip: 101-0024 Product: Japanese manufacturer of PV module backsheets. Coordinates:...

  18. Processing a printed wiring board by single bath electrodeposition

    DOE Patents [OSTI]

    Meltzer, Michael P. (Oakland, CA); Steffani, Christopher P. (Livermore, CA); Gonfiotti, Ray A. (Livermore, CA)

    2010-12-07

    A method of processing a printed wiring board. Initial processing steps are implemented on the printed wiring board. Copper is plated on the printed wiring board from a bath containing nickel and copper. Nickel is plated on the printed wiring board from a bath containing nickel and copper and final processing steps are implemented on the printed wiring board.

  19. Processing A Printed Wiring Board By Single Bath Electrodeposition

    DOE Patents [OSTI]

    Meltzer, Michael P. (Oakland, CA); Steffani, Christopher P. (Livermore, CA); Gonfiotti, Ray A. (Livermore, CA)

    2003-04-15

    A method of processing a printed wiring board by single bath electrodeposition. Initial processing steps are implemented on the printed wiring board. Copper is plated on the printed wiring board from a bath containing nickel and copper. Nickel is plated on the printed wiring board from the bath containing nickel and copper and final processing steps are implemented on the printed wiring board.

  20. Template:PrintFullVersionButton | Open Energy Information

    Open Energy Info (EERE)

    PrintFullVersionButton Jump to: navigation, search This is the PrintFullVersionButton template. It is intended for inclusion on any page where the printing of a superset of pages...

  1. Printing a Car: A Team Effort in Innovation (Text Version) |...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Printing a Car: A Team Effort in Innovation (Text Version) Printing a Car: A Team Effort in Innovation (Text Version) Below is the text version of the video Printing a Car: A Team ...

  2. Public Law 102-392 for Printing | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2-392 for Printing Public Law 102-392 for Printing Public Law 102-392 for Printing PDF ... Statement of Work-National Environmental Policy Act (NEPA) Support Services Acquisition: ...

  3. E-print Network : Main View : Deep Federated Search

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    javascript. Home About Contact Us Help E-print Network Search Powered By Deep Web Technologies New Search Preferences E-print Network E-print Network Skip to main content FAQ *...

  4. Minutes from the May 26, 2010 Printing and Mail Teleconference

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    26, 2010 Printing and Mail Managers Exchange Forum Teleconference Seventeen individuals participated in the Printing and Mail Managers Exchange Forum, which included Printing and Mail Managers and Contractors. Comments/Additions to last Months Minutes Dallas Woodruff, Headquarters opened the meeting by thanking everyone for participating in the today's teleconference. Printing Agenda Items... Update on the FY 2010, Congressional Joint Committee on Printing Commercial Printing Report "JCP

  5. Unitech Printed Circuit Board Corp UPCB | Open Energy Information

    Open Energy Info (EERE)

    Sector: Solar Product: Taiwan-based printed-circuit board maker with intent to enter into solar cell manufacturing industry. References: Unitech Printed Circuit Board Corp....

  6. Transfer Printed Microcells with Micro-Optic Concentrators for...

    Office of Scientific and Technical Information (OSTI)

    Transfer Printed Microcells with Micro-Optic Concentrators for Low Cost, High Performance Photovoltaic Modules Citation Details In-Document Search Title: Transfer Printed...

  7. Minutes from the March 17, 2010 Printing and Mail Teleconference

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Printing Agenda Items... Upcoming Congressional Joint Committee on Printing Commercial ... Woodruff also said Headquarters is planning visits to other sites this fiscal year. ...

  8. How We 3D-Print Aerogel

    SciTech Connect (OSTI)

    2015-04-23

    A new type of graphene aerogel will make for better energy storage, sensors, nanoelectronics, catalysis and separations. Lawrence Livermore National Laboratory researchers have made graphene aerogel microlattices with an engineered architecture via a 3D printing technique known as direct ink writing. The research appears in the April 22 edition of the journal, Nature Communications. The 3D printed graphene aerogels have high surface area, excellent electrical conductivity, are lightweight, have mechanical stiffness and exhibit supercompressibility (up to 90 percent compressive strain). In addition, the 3D printed graphene aerogel microlattices show an order of magnitude improvement over bulk graphene materials and much better mass transport.

  9. Aluminum plasmonic metamaterials for structural color printing

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Cheng, Fei; Gao, Jie; Stan, Liliana; Rosenmann, Daniel; Czaplewski, David; Yang, Xiaodong

    2015-05-26

    We report a structural color printing platform based on aluminum plasmonic metamaterials supporting near perfect light absorption and narrow-band spectral response tunable across the visible spectrum to realize high-resolution, angle-insensitive color printing with high color purity and saturation. Additionally, the fabricated metamaterials can be protected by a transparent polymer thin layer for ambient use with further improved color performance. The demonstrated structural color printing with aluminum plasmonic metamaterials offers great potential for relevant applications such as security marking and information storage.

  10. E-print Network Alert Service

    Office of Scientific and Technical Information (OSTI)

    Website Policies and Important Links E-print Web Log alert image About Search Browse by ... and engineering databases and Web sites, based on a search profile you submit to us. ...

  11. E-print Network : User Account

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New Search | My Selections (0) | | | | Alerts | E-print Network Create User Account User Name: Email Address: I want to: Always receive emails Receive emails if there are new...

  12. World's First 3-D Printed Car | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    World's First 3-D Printed Car World's First 3-D Printed Car Addthis Description The video is about a partnership between Local Motors and Oak Ridge National Laboratory to print the world's first 3-D printed car-the Strati-at the 2014 International Manufacturing Technology Show

  13. Minutes from the January 19, 2011 Printing and Mail Teleconference

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    January 2010 Printing and Mail Managers Exchange Forum Teleconference Twenty-one individuals participated in the Printing and Mail Managers Exchange Forum, which included Printing and Mail Managers and Contractors Comments/Additions to last Months Minutes No comments. Printing Agenda Items......... Update on the Department-wide FY-2010 Three-Year Plan Dallas Woodruff, Headquarters in formed the group that the Department-wide Printing and Publishing Activities is currently in the concurrence

  14. Minutes from the January 20, 2010 Printing and Mail Teleconference

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    , 2010 Printing and Mail Managers Exchange Forum Teleconference Twenty-one individuals participated in the Printing and Mail Managers Exchange Forum, which included Printing and Mail Managers and Contractors. Comments/Additions to last Months Minutes Dallas Woodruff, Headquarters opened the meeting by thanking everyone for participating in the today's teleconference. Printing Agenda Items... Update on the Department-wide Printing and Publishing Activities Report Three-Year Plan. Dallas Woodruff,

  15. Minutes from the July 21, 2010 Printing and Mail Teleconference

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    July 21, 2010 Printing and Mail Managers Exchange Forum Teleconference Twenty-one individuals participated in the Printing and Mail Managers Exchange Forum, which included Printing and Mail Managers and Contractors. Comments/Additions to last Months Minutes Dallas Woodruff, Headquarters opened the meeting by thanking everyone for participating in the today's teleconference. Printing Agenda Items... Update on the Government Printing Office revisions to the Standard Form one (SF!), Twenty-five

  16. Field Facilities Contacts for Printing and Mail | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Field Facilities Contacts for Printing and Mail Field Facilities Contacts for Printing and Mail This is the list of DOE field facilities contacts for Printing and Mail as of April 27, 2011. Go to Mail Services Go to Printing Services PDF icon Field_Facilities_Contacts_Print-Mail.pdf More Documents & Publications Director's Perspective by George Miller Tenant Education and Training Fire Safety Committee Membership List

  17. Printing Tiny Batteries | U.S. DOE Office of Science (SC)

    Office of Science (SC) Website

    "Printing" Tiny Batteries? Energy Frontier Research Centers (EFRCs) EFRCs Home Centers ... Stories of Discovery & Innovation: "Printing" Tiny Batteries? Print Text Size: A A A ...

  18. Nozzle geometry for organic vapor jet printing

    DOE Patents [OSTI]

    Forrest, Stephen R; McGraw, Gregory

    2015-01-13

    A first device is provided. The device includes a print head. The print head further includes a first nozzle hermetically sealed to a first source of gas. The first nozzle has an aperture having a smallest dimension of 0.5 to 500 microns in a direction perpendicular to a flow direction of the first nozzle. At a distance from the aperture into the first nozzle that is 5 times the smallest dimension of the aperture of the first nozzle, the smallest dimension perpendicular to the flow direction is at least twice the smallest dimension of the aperture of the first nozzle.

  19. Novel 3-D Printed Inverters for Electric Vehicles Can Improve...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Novel 3-D Printed Inverters for Electric Vehicles Can Improve EV Power and Efficiency Novel 3-D Printed Inverters for Electric Vehicles Can Improve EV Power and Efficiency April...

  20. Gas cushion control of OVJP print head position

    DOE Patents [OSTI]

    Forrest, Stephen R

    2014-10-07

    An OVJP apparatus and method for applying organic vapor or other flowable material to a substrate using a printing head mechanism in which the print head spacing from the substrate is controllable using a cushion of air or other gas applied between the print head and substrate. The print head is mounted for translational movement towards and away from the substrate and is biased toward the substrate by springs or other means. A gas cushion feed assembly supplies a gas under pressure between the print head and substrate which opposes the biasing of the print head toward the substrate so as to form a space between the print head and substrate. By controlling the pressure of gas supplied, the print head separation from the substrate can be precisely controlled.

  1. E-print Network Alerts -- Energy, science, and technology for...

    Office of Scientific and Technical Information (OSTI)

    Home About Advanced Search Browse by Discipline Scientific Societies E-print Alerts Add E-prints FAQ * HELP * SITE MAP * CONTACT US Enter Search Terms Search Advanced Search

  2. Dai Nippon Printing Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    Jump to: navigation, search Name: Dai Nippon Printing Co Ltd Place: Shinjuku-ku, Tokyo, Japan Zip: 162-8001 Sector: Solar Product: Print conglomerate which is involved with...

  3. Polarized X-Rays Reveal Molecular Alignment in Printed Electronics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Polarized X-Rays Reveal Molecular Alignment in Printed Electronics Polarized X-Rays Reveal Molecular Alignment in Printed Electronics Print Wednesday, 31 October 2012 00:00 The printing of electronic devices using giant roll-to-roll presses or inkjet-style printers has recently been made possible by the development of solution-processable organic materials with optoelectronic properties. Organic light-emitting diodes (OLEDs) are already being produced commercially, and sensors, organic thin-film

  4. Minutes from the March 14, 2013 Printing and Mail Teleconference

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    March 14, 2013 Mail discussion Al Majors is on leave today. Ellsworth Howell Jr. and Tony Nellums are sitting for Al. There are no agenda items for the Mail portion. A discussion period for questions, comments, or suggestions was opened without response Printing discussion Discussed suggestions for reducing printing expenses Presidential Executive Order 13589 and reducing hard copy printing in favor of electronic publishing Sec. 5. Printing. Agencies are encouraged to limit the publication and

  5. Minutes from the November 17, 2010 Printing and Mail Teleconference

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    November 17, 2010 Printing and Mail Managers Exchange Forum Teleconference Twenty seven individuals participated in the Printing and Mail Managers Exchange Forum, which included Printing and Mail Managers and Contractors Comments/Additions to last Months Minutes No comments. Printing Agenda Items......... Update on the Department-wide "Three-Year Plan" Dallas Woodruff, Headquarters opened the meeting by thanking everyone for providing their sites Three-Year Plan data to Headquarters in

  6. Minutes from the September 15, 2010 Printing and Mail Teleconference

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    September 15, 2010 Printing and Mail Managers Exchange Forum Teleconference Twenty-four individuals participated in the Printing and Mail Managers Exchange Forum, which included Printing and Mail Managers and Contractors. Comments/Additions to last Months Minutes Dallas Woodruff, Headquarters opened the meeting by thanking everyone for participating in the today's teleconference. Printing Agenda Items... Upcoming FY 2010 Department-wide Three-Year Plan Dallas Woodruff, Headquarters informed the

  7. Department of Energy Strategic Plan, May 2011, Print Quality | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Department of Energy Strategic Plan, May 2011, Print Quality Department of Energy Strategic Plan, May 2011, Print Quality Posted here are publication materials related to the Department of Energy's Strategic Plan of 2011. DOE_2011-Strategic-Plan_High-Resolution_Print-Quality is a full-data, high-resolution version of the document. This will print/reproduce with the maximum resolution available from your output device (printer). This is a 15.7 Mb file.

  8. 3D Printing Medical Devices | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3D Printed and Semiconductor Technology 'Mash-up' 3D Printed and Semiconductor Technology 'Mash-up' May 7, 2015 - 4:11pm Addthis 3D Printed and Semiconductor Technology 'Mash-up' What will you get if you put a 3D-printed inverter package with wide bandgap materials, together with the 3D-printed EV version of the Shelby Cobra "plug and play" laboratory-on-wheels? You'll get innovation - innovation that will define even lighter, more powerful, and more efficient vehicles. Oak Ridge

  9. A Docking Casette For Printed Circuit Boards

    DOE Patents [OSTI]

    Barringer, Dennis R. (Wallkill, NY); Seminaro, Edward J. (Milton, NY); Toffler, Harold M. (Newburgh, NY)

    2003-08-19

    A docking apparatus for printed circuit boards including a cassette housing, having a housing base, a housing cover and a housing wall, wherein the housing base and the housing wall are disposed relative to each other so as to define a housing cavity for containing a printed circuit board and wherein the housing wall includes a cable opening disposed so as to be communicated with the housing cavity, a linkage mechanism, wherein the linkage mechanism includes an engagement configuration and a disengagement configuration and wherein the linkage mechanism is disposed so as to be associated with the cassette housing and a housing bezel, wherein the housing bezel is disposed relative to the cassette housing so as to be associated with the cable opening.

  10. Solar paint: From synthesis to printing

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Zhou, Xiaojing; Belcher, Warwick; Dastoor, Paul

    2014-11-13

    Water-based polymer nanoparticle dispersions (solar paint) offer the prospect of addressing two of the main challenges associated with printing large area organic photovoltaic devices; namely, how to control the nanoscale architecture of the active layer and eliminate the need for hazardous organic solvents during device fabrication. We review progress in the field of nanoparticulate organic photovoltaic (NPOPV) devices and future prospects for large-scale manufacturing of solar cells based on this technology.

  11. 3D Printing Comes of Age

    Broader source: Energy.gov [DOE]

    The highlight of this year's International Manufacturing Technology Show (IMTS), held earlier in September at the McCormick Place Convention Center in Chicago, IL, was the electric car produced live during the Show. More than 110,000 people witnessed the representatives from Cincinnati Incorporated, Local Motors, and the Manufacturing Demonstration Facility at Oak Ridge National Laboratory in Tennessee print the working electric car layer by layer using carbon fiber reinforced polymer composite.

  12. Polarized X-Rays Reveal Molecular Alignment in Printed Electronics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Polarized X-Rays Reveal Molecular Alignment in Printed Electronics Print The printing of electronic devices using giant roll-to-roll presses or inkjet-style printers has recently been made possible by the development of solution-processable organic materials with optoelectronic properties. Organic light-emitting diodes (OLEDs) are already being produced commercially, and sensors, organic thin-film transistors (OTFTs), and organic photovoltaics (OPVs) are also well on their way to commercial

  13. Polarized X-Rays Reveal Molecular Alignment in Printed Electronics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Polarized X-Rays Reveal Molecular Alignment in Printed Electronics Print The printing of electronic devices using giant roll-to-roll presses or inkjet-style printers has recently been made possible by the development of solution-processable organic materials with optoelectronic properties. Organic light-emitting diodes (OLEDs) are already being produced commercially, and sensors, organic thin-film transistors (OTFTs), and organic photovoltaics (OPVs) are also well on their way to commercial

  14. Polarized X-Rays Reveal Molecular Alignment in Printed Electronics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Polarized X-Rays Reveal Molecular Alignment in Printed Electronics Print The printing of electronic devices using giant roll-to-roll presses or inkjet-style printers has recently been made possible by the development of solution-processable organic materials with optoelectronic properties. Organic light-emitting diodes (OLEDs) are already being produced commercially, and sensors, organic thin-film transistors (OTFTs), and organic photovoltaics (OPVs) are also well on their way to commercial

  15. Polarized X-Rays Reveal Molecular Alignment in Printed Electronics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Polarized X-Rays Reveal Molecular Alignment in Printed Electronics Print The printing of electronic devices using giant roll-to-roll presses or inkjet-style printers has recently been made possible by the development of solution-processable organic materials with optoelectronic properties. Organic light-emitting diodes (OLEDs) are already being produced commercially, and sensors, organic thin-film transistors (OTFTs), and organic photovoltaics (OPVs) are also well on their way to commercial

  16. Polarized X-Rays Reveal Molecular Alignment in Printed Electronics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Polarized X-Rays Reveal Molecular Alignment in Printed Electronics Print The printing of electronic devices using giant roll-to-roll presses or inkjet-style printers has recently been made possible by the development of solution-processable organic materials with optoelectronic properties. Organic light-emitting diodes (OLEDs) are already being produced commercially, and sensors, organic thin-film transistors (OTFTs), and organic photovoltaics (OPVs) are also well on their way to commercial

  17. Polarized X-Rays Reveal Molecular Alignment in Printed Electronics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Polarized X-Rays Reveal Molecular Alignment in Printed Electronics Print The printing of electronic devices using giant roll-to-roll presses or inkjet-style printers has recently been made possible by the development of solution-processable organic materials with optoelectronic properties. Organic light-emitting diodes (OLEDs) are already being produced commercially, and sensors, organic thin-film transistors (OTFTs), and organic photovoltaics (OPVs) are also well on their way to commercial

  18. Polarized X-Rays Reveal Molecular Alignment in Printed Electronics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Polarized X-Rays Reveal Molecular Alignment in Printed Electronics Print The printing of electronic devices using giant roll-to-roll presses or inkjet-style printers has recently been made possible by the development of solution-processable organic materials with optoelectronic properties. Organic light-emitting diodes (OLEDs) are already being produced commercially, and sensors, organic thin-film transistors (OTFTs), and organic photovoltaics (OPVs) are also well on their way to commercial

  19. Polarized X-Rays Reveal Molecular Alignment in Printed Electronics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Polarized X-Rays Reveal Molecular Alignment in Printed Electronics Print The printing of electronic devices using giant roll-to-roll presses or inkjet-style printers has recently been made possible by the development of solution-processable organic materials with optoelectronic properties. Organic light-emitting diodes (OLEDs) are already being produced commercially, and sensors, organic thin-film transistors (OTFTs), and organic photovoltaics (OPVs) are also well on their way to commercial

  20. 3D Printed Car at the International Manufacturing Technology Show |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy 3D Printed Car at the International Manufacturing Technology Show 3D Printed Car at the International Manufacturing Technology Show Addthis WORLD&#039;S FIRST 1 of 6 WORLD'S FIRST The world's first 3D-printed car on display at the International Manufacturing Technology Show in Chicago last week. Arizona-based Local Motors, and Cincinnati Incorporated teamed with Oak Ridge National Laboratory's Manufacturing Demonstration Facility-with funding support from the Energy

  1. W7 printing from VISITOR network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    W7 printing from VISITOR network Last Modified by Jerry Camuso, 02/12/2015. 1 . From the "start menu", click on "Devices and Printers" 2. Click on "Add a printer" and choose "Add a local printer". 3 . Choose "create a new port" and pick "Standard TCP/IP Port" from the drop down menu. 4. Type the following for the next box and click "Next": Hostname or IP address: PRINTSERV.slac.stanford.edu Port name: This should be the DNS

  2. DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    29 Oct 2015 DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS OF THE DOCUMENT IN IDM Technical Specifications (In-Cash Procurement) Tech Specs for Boundary and first...

  3. E-print Network home page -- Energy, science, and technology...

    Office of Scientific and Technical Information (OSTI)

    Energy, science, and technology for the research community Enter Search Terms Search Advanced Search The E-print Network is . . . . . . a vast, integrated network of electronic ...

  4. DOE fundamentals handbook: Engineering symbology, prints, and drawings

    SciTech Connect (OSTI)

    Not Available

    1993-01-01

    The Engineering Symbology, Prints, and Drawings Handbook was developed to assist nuclear facility operating contractors in providing operators, maintenance personnel, and technical staff with the necessary fundamentals training to ensure a basic understanding of engineering prints, their use, and their function. The handbook includes information on engineering fluid drawings and prints; piping and instrument drawings; major symbols and conventions; electronic diagrams and schematics; logic circuits and diagrams; and fabrication, construction, and architectural drawings. This information will provide personnel with a foundation for reading, interpreting, and using the engineering prints and drawings that are associated with various DOE nuclear facility operations and maintenance.

  5. DOE fundamentals handbook: Engineering symbology, prints, and drawings. Volume 2

    SciTech Connect (OSTI)

    Not Available

    1993-01-01

    The Engineering Symbology, Prints, and Drawings Handbook was developed to assist nuclear facility operating contractors in providing operators, maintenance personnel, and technical staff with the necessary fundamentals training to ensure a basic understanding of engineering prints, their use, and their function. The handbook includes information on engineering fluid drawings and prints; piping and instrument drawings; major symbols and conventions; electronic diagrams and schematics; logic circuits and diagrams; and fabrication, construction, and architectural drawings. This information will provide personnel with a foundation for reading, interpreting, and using the engineering prints and drawings that are associated with various DOE nuclear facility operations and maintenance.

  6. DOE fundamentals handbook: Engineering symbology, prints, and drawings. Volume 1

    SciTech Connect (OSTI)

    Not Available

    1993-01-01

    The Engineering Symbology, Prints, and Drawings Handbook was developed to assist nuclear facility operating contractors in providing operators, maintenance personnel, and technical staff with the necessary fundamentals training to ensure a basic understanding of engineering prints, their use, and their function. The handbook includes information on engineering fluid drawings and prints; piping and instrument drawings; major symbols and conventions; electronic diagrams and schematics; logic circuits and diagrams; and fabrication, construction, and architectural drawings. This information will provide personnel with a foundation for reading, interpreting, and using the engineering prints and drawings that are associated with various DOE nuclear facility operations and maintenance.

  7. Silver Ink for Conductor Printing - Energy Innovation Portal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    flake suspended in a suitable solvent amenable to printing. These silver metal suspension formulations require high processing temperatures to sinter the particles (180 C)....

  8. LLNL researchers outline what happens during metal 3D printing...

    National Nuclear Security Administration (NNSA)

    - examine a 3D-printed part manufactured using the selective laser melting process. ... The powder bed fusion process, also known as selective laser melting (SLM), requires thin ...

  9. Wind Turbine Manufacturing Transforms with Three-Dimensional Printing

    Broader source: Energy.gov [DOE]

    From medical devices to airplane components, three-dimensional (3-D) printing (also called additive manufacturing) is transforming the manufacturing industry. Now, research that supports the Energy...

  10. 3D Printed Shelby Cobra | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3D Printed Shelby Cobra 3D Printed Shelby Cobra Description ORNL's newly printed 3D car will be showcased at the 2015 NAIAS in Detroit. This "laboratory on wheels" uses the Shelby Cobra design, celebrating the 50th anniversary of this model and honoring the first vehicle to be voted a national monument. The Shelby was printed at the Department of Energy's Manufacturing Demonstration Facility at ORNL using the BAAM (Big Area Additive Manufacturing) machine and is intended as a

  11. 3D Printing a Classic | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3D Printing a Classic 3D Printing a Classic January 15, 2015 - 4:02pm Addthis The team from the Oak Ridge Manufacturing Demonstration Facility is at the Detroit Auto Show this week to display their latest accomplishment: a 3D-printed, electric-motor driven, Shelby Cobra. In just six weeks, the team went from designing the car in digital models, to 3D printing the frame and other parts with fiber-reinforced composite material, to assembling, finishing, and painting the final product. President

  12. Minutes from the Print and Mail Managers Exchange Forum Teleconferences

    Broader source: Energy.gov [DOE]

    Minutes from the Print and Mail Managers Exchange Forum Teleconferences.  Contact the Office of Administrative Management and Support at (202) 586-4318 with any questions.

  13. Minutes from the May 3, 2012 Printing and Mail Teleconference

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    http:www.gsa.govmailpolicy (for training options) https:www.intra-mail.com ... discussion Brainstorming discussion on methodsapproaches to reduce printing expenses: ...

  14. Structural color printing based on plasmonic metasurfaces of...

    Office of Scientific and Technical Information (OSTI)

    Moreover, the fabricated metasurfaces can be protected with a protective coating for ambient use without degrading performances. The demonstrated structural color printing platform ...

  15. 3D Printed and Semiconductor Technology 'Mash-up'

    Broader source: Energy.gov [DOE]

    What will you get if you put a 3D-printed inverter package with wide bandgap materials, together with the 3D-printed EV version of the Shelby Cobra “plug and play” laboratory-on-wheels? You’ll get...

  16. Local Motors Begins Their Six Day Quest to 3D Print the 'Strati...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PDF icon Local Motors Begins Their Six Day Quest to 3D Print the 'Strati' Car Live at IMTS More Documents & Publications Printing a Car: A Team Effort in Innovation Printing a Car: ...

  17. In Situ X-Ray Scattering Helps Optimize Printed Solar Cells

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    In Situ X-Ray Scattering Helps Optimize Printed Solar Cells Print Plastic solar cells that can be printed on flexible sheets with an ink-like solution show a lot of potential as a...

  18. In Situ X-Ray Scattering Helps Optimize Printed Solar Cells

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    In Situ X-Ray Scattering Helps Optimize Printed Solar Cells In Situ X-Ray Scattering Helps Optimize Printed Solar Cells Print Wednesday, 25 February 2015 00:00 Plastic solar cells...

  19. Fact #804: November 18, 2013 Tool Available to Print Used Vehicle...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Available to Print Used Vehicle Fuel Economy Window Stickers Fact 804: November 18, 2013 Tool Available to Print Used Vehicle Fuel Economy Window Stickers Because used vehicle ...

  20. Suitability for 3D Printed Parts for Laboratory Use

    SciTech Connect (OSTI)

    Zwicker, Andrew P.; Bloom, Josh; Albertson, Robert; Gershman, Sophia

    2014-08-01

    3D printing has become popular for a variety of users, from industrial to the home hobbyist, to scientists and engineers interested in producing their own laboratory equipment. In order to determine the suitability of 3D printed parts for our plasma physics laboratory, we measured the accuracy, strength, vacuum compatibility, and electrical properties of pieces printed in plastic. The flexibility of rapidly creating custom parts has led to the 3D printer becoming an invaluable resource in our laboratory and is equally suitable for producing equipment for advanced undergraduate laboratories.

  1. Print-based Manufacturing of Integrated, Low Cost, High Performance...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    a new low-cost, high-efficiency LED architecture made possible by novel large-area ... Related Publications PDF icon 2015 BTO Peer Review Presentation - Print-based ...

  2. Printing 3D Catalytic Devices | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Printing 3D Catalytic Devices An error occurred. Try watching this video on www.youtube.com, or enable JavaScript if it is disabled in your browser. Ames Laboratory scientist Igor...

  3. Printed decorative solar panels could become part of our homes...

    Open Energy Info (EERE)

    content Printed decorative solar panels could become part of our homes and offices Hello, I provide user supp... The top one on this page: htt... Can you send the specific...

  4. Instructions to Print Monthly P-card Statement

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    to Print Monthly P-card Statement 1. Go to Website https:gov1.paymentnet.com and login with your Organization ID, User ID and Pass Phrase. Organization ID is doe0001. User ID and...

  5. 3D Printing Enables New Generation of Heat Exchangers

    Broader source: Energy.gov [DOE]

    Three-dimensional printing is revolutionizing how we manufacture objects in almost every industry—from vehicles to medical devices to biotech. Now, the University of Maryland, through a partnership...

  6. Browse by Discipline -- E-print Network Subject Pathways: Fission...

    Office of Scientific and Technical Information (OSTI)

    K L M N O P Q R S T U V W X Y Z Optimization Online, An E-Print Site for the Optimization Community Oregon State University, Department of Mathematics, Vector Calculus Gap Project

  7. Printing a Car: A Team Effort in Innovation

    Broader source: Energy.gov [DOE]

    Oak Ridge National Lab's work with Local Motors to build a 3D-printed car was highlighted at the International Manufacturing Technology Show (IMTS) in September 2014 with a live demonstration.

  8. Future of 3D Printing | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    In 2016, GE will enter a new jet engine into service called the CFM LEAP-the first in GE's line to incorporate 3D-printed parts. Specifically, it will be a combustion component ...

  9. Aluminum plasmonic metamaterials for structural color printing (Journal

    Office of Scientific and Technical Information (OSTI)

    Article) | SciTech Connect Aluminum plasmonic metamaterials for structural color printing Citation Details In-Document Search Title: Aluminum plasmonic metamaterials for structural color printing Authors: Cheng, Fei ; Gao, Jie ; Stan, Liliana ; Rosenmann, Daniel ; Czaplewski, David ; Yang, Xiaodong Publication Date: 2015-05-26 OSTI Identifier: 1222274 Grant/Contract Number: AC02-06CH11357 Type: Published Article Journal Name: Optics Express Additional Journal Information: Journal Volume: 23;

  10. Optical systems fabricated by printing-based assembly

    DOE Patents [OSTI]

    Rogers, John; Nuzzo, Ralph; Meitl, Matthew; Menard, Etienne; Baca, Alfred J.; Motala, Michael; Ahn, Jong-Hyun; Park, Sang-II; Yu; Chang-Jae; Ko, Heung-Cho; Stoykovich; Mark; Yoon, Jongseung

    2011-07-05

    Provided are optical devices and systems fabricated, at least in part, via printing-based assembly and integration of device components. In specific embodiments the present invention provides light emitting systems, light collecting systems, light sensing systems and photovoltaic systems comprising printable semiconductor elements, including large area, high performance macroelectronic devices. Optical systems of the present invention comprise semiconductor elements assembled, organized and/or integrated with other device components via printing techniques that exhibit performance characteristics and functionality comparable to single crystalline semiconductor based devices fabricated using conventional high temperature processing methods. Optical systems of the present invention have device geometries and configurations, such as form factors, component densities, and component positions, accessed by printing that provide a range of useful device functionalities. Optical systems of the present invention include devices and device arrays exhibiting a range of useful physical and mechanical properties including flexibility, shapeability, conformability and stretchablity.

  11. Optical systems fabricated by printing-based assembly

    DOE Patents [OSTI]

    Rogers, John; Nuzzo, Ralph; Meitl, Matthew; Menard, Etienne; Baca, Alfred; Motala, Michael; Ahn, Jong -Hyun; Park, Sang -Il; Yu, Chang -Jae; Ko, Heung Cho; Stoykovich, Mark; Yoon, Jongseung

    2015-08-25

    Provided are optical devices and systems fabricated, at least in part, via printing-based assembly and integration of device components. In specific embodiments the present invention provides light emitting systems, light collecting systems, light sensing systems and photovoltaic systems comprising printable semiconductor elements, including large area, high performance macroelectronic devices. Optical systems of the present invention comprise semiconductor elements assembled, organized and/or integrated with other device components via printing techniques that exhibit performance characteristics and functionality comparable to single crystalline semiconductor based devices fabricated using conventional high temperature processing methods. Optical systems of the present invention have device geometries and configurations, such as form factors, component densities, and component positions, accessed by printing that provide a range of useful device functionalities. Optical systems of the present invention include devices and device arrays exhibiting a range of useful physical and mechanical properties including flexibility, shapeability, conformability and stretchablity.

  12. Optical systems fabricated by printing-based assembly

    DOE Patents [OSTI]

    Rogers, John; Nuzzo, Ralph; Meitl, Matthew; Menard, Etienne; Baca, Alfred J; Motala, Michael; Ahn, Jong-Hyun; Park, Sang-Il; Yu, Chang-Jae; Ko, Heung Cho; Stoykovich, Mark; Yoon, Jongseung

    2014-05-13

    Provided are optical devices and systems fabricated, at least in part, via printing-based assembly and integration of device components. In specific embodiments the present invention provides light emitting systems, light collecting systems, light sensing systems and photovoltaic systems comprising printable semiconductor elements, including large area, high performance macroelectronic devices. Optical systems of the present invention comprise semiconductor elements assembled, organized and/or integrated with other device components via printing techniques that exhibit performance characteristics and functionality comparable to single crystalline semiconductor based devices fabricated using conventional high temperature processing methods. Optical systems of the present invention have device geometries and configurations, such as form factors, component densities, and component positions, accessed by printing that provide a range of useful device functionalities. Optical systems of the present invention include devices and device arrays exhibiting a range of useful physical and mechanical properties including flexibility, shapeability, conformability and stretchablity.

  13. Toward integrated PV panels and power electronics using printing technologies

    SciTech Connect (OSTI)

    Ababei, Cristinel; Yuvarajan, Subbaraya; Schulz, Douglas L.

    2010-07-15

    In this paper, we review the latest developments in the area of printing technologies with an emphasis on the fabrication of control-embedded photovoltaics (PV) with on-board active and passive devices. We also review the use of power converters and maximum power point tracking (MPPT) circuits with PV panels. Our focus is on the investigation of the simplest implementations of such circuits in view of their integration with solar cells using printing technologies. We see this concept as potentially enabling toward further cost reduction. Besides a discussion as to feasibility, we shall also present some projections and guidelines toward possible integration. (author)

  14. High density printed electrical circuit board card connection system

    DOE Patents [OSTI]

    Baumbaugh, A.E.

    1997-05-06

    A zero insertion/extraction force printed circuit board card connection system comprises a cam-operated locking mechanism disposed along an edge portion of the printed circuit board. The extrusions along the circuit board mate with an extrusion fixed to the card cage having a plurality of electrical connectors. The card connection system allows the connectors to be held away from the circuit board during insertion/extraction and provides a constant mating force once the circuit board is positioned. The card connection system provides a simple solution to the need for a greater number of electrical signal connections. 12 figs.

  15. High density printed electrical circuit board card connection system

    DOE Patents [OSTI]

    Baumbaugh, Alan E.

    1997-01-01

    A zero insertion/extraction force printed circuit board card connection system comprises a cam-operated locking mechanism disposed along an edge portion of the printed circuit board. The extrusions along the circuit board mate with an extrusion fixed to the card cage having a plurality of electrical connectors. The card connection system allows the connectors to be held away from the circuit board during insertion/extraction and provides a constant mating force once the circuit board is positioned. The card connection system provides a simple solution to the need for a greater number of electrical signal connections.

  16. 3D Printing a Classic Shelby Cobra | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3D Printing a Classic Shelby Cobra 3D Printing a Classic Shelby Cobra Addthis Zero to 60 in under five seconds. Concept to reality in just six weeks. 1 of 22 Zero to 60 in under five seconds. Concept to reality in just six weeks. The classic Shelby Cobra roadster turns 50 in 2015. To celebrate, a team of engineers at the Department of Energy's Oak Ridge National Laboratory set out to create a replica of this iconic car using a massive 3D printer, advanced composite materials, and exciting new

  17. The 3D-Printed Shelby Cobra: Defining Rapid Innovation

    Broader source: Energy.gov [DOE]

    The 3D-Printed Shelby Cobra: Defining Rapid Innovation It’s been hard to miss in the media and on its almost non-stop road tour, but AMO wanted you to know that our 3D-printed EV version of the 50th anniversary Shelby Cobra just left the Forrestal building lobby after visiting for two weeks. Secretary Moniz dropped in for a quick tour around the car with Mark Johnson, AMO’s Director and David Danielson, EERE’s Assistant Secretary on Tuesday April 7th.

  18. Using 3D Printing to Redesign Santa's Sleigh | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    In the past, we've utilized GE technology to redesign Santa's Sleigh and have asked our additive manufacturing researchers to design and print 3D printed Christmas tree...

  19. ENG-Canada-USA Government Procurement (clean 11 Feb 2010 printed...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ENG-Canada-USA Government Procurement (clean 11 Feb 2010 printed) ENG-Canada-USA Government Procurement (clean 11 Feb 2010 printed) PDF icon ENG-Canada-USA Government Procurement ...

  20. EERE Success Story-Novel 3-D Printed Inverters for Electric Vehicles...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Novel 3-D Printed Inverters for Electric Vehicles Can Improve EV Power and Efficiency EERE Success Story-Novel 3-D Printed Inverters for Electric Vehicles Can Improve EV Power and ...

  1. E-print Network Web Log News: Research Communications for Scientists...

    Office of Scientific and Technical Information (OSTI)

    Weve had a number of inquiries about how to best search our E-prints on Web-sites feature for individual authors. Heres what you do. First be sure that the E-prints on Web ...

  2. Install the E-print Network toolbar -- Energy, science, and technology...

    Office of Scientific and Technical Information (OSTI)

    Home About Advanced Search Browse by Discipline Scientific Societies E-print Alerts Add E-prints FAQ * HELP * SITE MAP * CONTACT US Enter Search Terms Search Advanced Search

  3. Intense X-rays expose tiny flaws in 3-D printed titanium that...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Intense X-rays expose tiny flaws in 3-D printed titanium that can lead to breakage over time By Katie Elyce Jones * March 4, 2016 Tweet EmailPrint Titanium is strong but light - a ...

  4. "Printing" Tiny Batteries | U.S. DOE Office of Science (SC)

    Office of Science (SC) Website

    "Printing" Tiny Batteries News News Home Featured Articles 2016 2015 2014 2013 2012 2011 ... (202) 586-5430 06.24.13 "Printing" Tiny Batteries Researchers use sophisticated 3D ...

  5. Printing a Car: A Team Effort in Innovation

    SciTech Connect (OSTI)

    Rogers, Jay; Love, Lonnie; Johnson, Mark; Ivester, Rob; Neff, Rick; Blue, Craig

    2014-09-17

    The story behind the realization of a unique project: the building of a 3D printed electric car, as told by team members. Strati materialized out of 15% carbon-reinforced ABS thermoplastic in a record 44 hours, under the very eyes of attendees at this year's International Manufacturing Technology Show (IMTS).

  6. Gas microstrip detectors based on flexible printed circuit technology

    SciTech Connect (OSTI)

    Salomon, M.; Crowe, K.; Faszer, W.; Lindsay, P.; Maier, J.M.C.

    1996-06-01

    The authors have studied the properties of a new type of Gas Microstrip Counter built using flexible printed circuit technology. They describe the manufacturing procedures, the assembly of the device, as well as its operation under a variety of conditions, gases and types of radiation. They also describe two new passivation materials, tantalum and niobium, which produce effective surfaces.

  7. Printing a Car: A Team Effort in Innovation

    ScienceCinema (OSTI)

    Rogers, Jay; Love, Lonnie; Johnson, Mark; Ivester, Rob; Neff, Rick; Blue, Craig;

    2014-11-24

    The story behind the realization of a unique project: the building of a 3D printed electric car, as told by team members. Strati materialized out of 15% carbon-reinforced ABS thermoplastic in a record 44 hours, under the very eyes of attendees at this year's International Manufacturing Technology Show (IMTS).

  8. Monolithically integrated Helmholtz coils by 3-dimensional printing

    SciTech Connect (OSTI)

    Li, Longguang [Department of Electrical Engineering, University of MichiganShanghai Jiao Tong University Joint Institute, Shanghai Jiao Tong University, Shanghai 200240 (China); Abedini-Nassab, Roozbeh; Yellen, Benjamin B., E-mail: yellen@duke.edu [Department of Electrical Engineering, University of MichiganShanghai Jiao Tong University Joint Institute, Shanghai Jiao Tong University, Shanghai 200240 (China); Department of Mechanical Engineering and Materials Science, Duke University, P.O. Box 90300, Hudson Hall, Durham, North Carolina 27708 (United States)

    2014-06-23

    3D printing technology is of great interest for the monolithic fabrication of integrated systems; however, it is a challenge to introduce metallic components into 3D printed molds to enable broader device functionality. Here, we develop a technique for constructing a multi-axial Helmholtz coil by injecting a eutectic liquid metal Gallium Indium alloy (EGaIn) into helically shaped orthogonal cavities constructed in a 3D printed block. The tri-axial solenoids each carry up to 3.6?A of electrical current and produce magnetic field up to 70?G. Within the central section of the coil, the field variation is less than 1% and is in agreement with theory. The flow rates and critical pressures required to fill the 3D cavities with liquid metal also agree with theoretical predictions and provide scaling trends for filling the 3D printed parts. These monolithically integrated solenoids may find future applications in electronic cell culture platforms, atomic traps, and miniaturized chemical analysis systems based on nuclear magnetic resonance.

  9. The 3D-Printed Shelby Cobra: Defining Rapid Innovation

    Broader source: Energy.gov [DOE]

    It’s been hard to miss in the media and on its almost non-stop road tour, but AMO wanted you to know that our 3D-printed EV version of the 50th anniversary Shelby Cobra just left the Forrestal...

  10. Picture of the Week: An explosion of 3D printing technology

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    An explosion of 3D printing technology Scientists in Los Alamos National Laboratory's Chemistry and Explosive Science and Shock Physics divisions are exploring new methods for 3D printing that allow for the function of materials to be controlled by their internal structure. May 24, 2015 An explosion of 3D printing technology x View image on Flickr » Additive Manufacturing, known also as 3D printing, allows for the rapid production of parts with complex shapes that would be impossible to

  11. 3D-Printed Car by Local Motors - The Strati | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    D-Printed Car by Local Motors - The Strati 3D-Printed Car by Local Motors - The Strati Local Motors 3D-Printed Car Timelapse Text Version The video starts with an image of the completed Strati and the Local Motors logo flashing on the screen. The process to create the 3D-printed car is shown high speed, with fast music. Again, the Local Motors logo flashes on the screen, along with the words "#3DPrintedCar." The video continues to show the 3D printing process high speed, interspersed

  12. EERE Success Story-Novel 3-D Printed Inverters for Electric Vehicles Can

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Improve EV Power and Efficiency | Department of Energy Novel 3-D Printed Inverters for Electric Vehicles Can Improve EV Power and Efficiency EERE Success Story-Novel 3-D Printed Inverters for Electric Vehicles Can Improve EV Power and Efficiency April 28, 2015 - 2:02pm Addthis 3-D Printed Inverter 3-D Printed Inverter Plug-in electric vehicle technologies are on their way to being even lighter, more powerful and more efficient with the advent of power inverters created by 3-D printing and

  13. Selective evaporation of focusing fluid in two-fluid hydrodynamic print head.

    SciTech Connect (OSTI)

    Keicher, David M.; Cook, Adam W.

    2014-09-01

    The work performed in this project has demonstrated the feasibility to use hydrodynamic focusing of two fluid steams to create a novel micro printing technology for electronics and other high performance applications. Initial efforts focused solely on selective evaporation of the sheath fluid from print stream provided insight in developing a unique print head geometry allowing excess sheath fluid to be separated from the print flow stream for recycling/reuse. Fluid flow models suggest that more than 81 percent of the sheath fluid can be removed without affecting the print stream. Further development and optimization is required to demonstrate this capability in operation. Print results using two-fluid hydrodynamic focusing yielded a 30 micrometers wide by 0.5 micrometers tall line that suggests that the cross-section of the printed feature from the print head was approximately 2 micrometers in diameter. Printing results also demonstrated that complete removal of the sheath fluid is not necessary for all material systems. The two-fluid printing technology could enable printing of insulated conductors and clad optical interconnects. Further development of this concept should be pursued.

  14. Direct printing and reduction of graphite oxide for flexible supercapacitors

    SciTech Connect (OSTI)

    Jung, Hanyung; Ve Cheah, Chang; Jeong, Namjo; Lee, Junghoon

    2014-08-04

    We report direct printing and photo-thermal reduction of graphite oxide (GO) to obtain a highly porous pattern of interdigitated electrodes, leading to a supercapacitor on a flexible substrate. Key parameters optimized include the amount of GO delivered, the suitable photo-thermal energy level for effective flash reduction, and the substrate properties for appropriate adhesion after reduction. Tests with supercapacitors based on the printed-reduced GO showed performance comparable with commercial supercapacitors: the energy densities were 1.06 and 0.87 mWh/cm{sup 3} in ionic and organic electrolytes, respectively. The versatility in the architecture and choice of substrate makes this material promising for smart power applications.

  15. Coaxial connector for use with printed circuit board edge connector

    DOE Patents [OSTI]

    Howard, Donald R. (Danville, CA); MacGill, Robert A. (Richmond, CA)

    1989-01-01

    A coaxial cable connector for interfacing with an edge connector for a printed circuit board whereby a coaxial cable can be interconnected with a printed circuit board through the edge connector. The coaxial connector includes a body having two leg portions extending from one side for receiving the edge connector therebetween, and a tubular portion extending from an opposing side for receiving a coaxial cable. A cavity within the body receives a lug of the edge connector and the center conductor of the coaxial cable. Adjacent lugs of the edge connector can be bend around the edge connector housing to function as spring-loaded contacts for receiving the coaxial connector. The lugs also function to facilitate shielding of the center conductor where fastened to the edge connector lug.

  16. SANDIA REPORT SAND2012-10150 Unlimited Release Printed November

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2-10150 Unlimited Release Printed November 2012 Early-Stage Quantitative Risk Assessment to Support Development of Codes and Standard Requirements for Indoor Fueling of Hydrogen Vehicles Katrina M. Groth, Jeffrey L. LaChance, Aaron P. Harris Prepared by Sandia National Laboratories Albuquerque, New Mexico 87185 and Livermore, California 94550 Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin

  17. SANDIA REPORT SAND2014-19199 Unlimited Release Printed October,

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4-19199 Unlimited Release Printed October, 2014 A Handbook on Artificial Soils for Indoor Photovoltaic Soiling Tests Patrick D. Burton, Bruce H. King Prepared by Sandia National Laboratories Albuquerque, New Mexico 87185 and Livermore, California 94550 Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under

  18. Gas microstrip detectors based on flexible printed circuit

    SciTech Connect (OSTI)

    Salomon, M.; Crowe, K.; Faszer, W.; Lindsay, P.; Curran Maier, J.M.

    1995-09-01

    Microstrip Gas Detectors (MSGC`s) were introduced some years ago as position sensitive detectors capable of operating at very high rates. The authors have studied the properties of a new type of Gas Microstrip Counter built using flexible printed circuit technology. They describe the manufacturing procedures, the assembly of the device, as well as its operation under a variety of conditions, gases and types of radiation. They also describe two new passivation materials, tantalum and niobium, which produce effective surfaces.

  19. Federal Sustainable Print Management - DOE Directives, Delegations, and

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Requirements G 436.1-1, Federal Sustainable Print Management by Jake Wooley The Guide provides acceptable approaches for implementing the IT sustainability requirements and criteria required by DOE Order 436.1, Departmental Sustainability, dated 5-2-11, and related to the sustainability requirements contained in Executive Order 13693, "Planning for Federal Sustainability in the Next Decade." Does not cancel/supersede other directives. g4361-1.pdf -- PDF Document, 450 KB Writer:

  20. Minutes from the February 23, 2012 Printing and Mail Teleconference

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Minutes Printing and Mail Managers Exchange Forum Teleconference February 23, 2012 Participants: Headquarters (5) National Energy Technology Laboratory, PA National Security Complex Y-12 (2) Oak Ridge National Laboratory Y-12 Site Office (2) Hanford Site Office Oak Ridge Association University Oak Ridge Operations Office BWXT Pantex Site Office JanTec Corporation, Richland, Washington Los Alamos National Laboratory Chicago Office Bettis Atomic Power Laboratory National Security Technology C1,

  1. Jane E. Lawton Conservation Loan Program

    Broader source: Energy.gov [DOE]

    Lawton Loans can be made to eligible nonprofits, including hospitals and private schools; local governments, including public school systems and community colleges; and businesses. (Eligible nonp...

  2. Jane A. Hedges | Department of Energy

    Energy Savers [EERE]

    Jacksonville, Florida Jacksonville, Florida ShopSmart with JEA Location: Jacksonville, Florida Seed Funding: $1.2 million-a portion of SEEA Southeast Consortium's $20 million funding Target Building Types: Residential (single-family) Website: https://jea.com/shopsmart/ Learn More: Read strategic financing story Read SEEA Snapshot Reports Watch program video JEA Helps Jacksonville Homes Shop Smart for Energy Efficiency Keeping a home comfortable in Florida's hot and humid climate is an inherent

  3. Non-Contact Printed Aluminum Metallization of Si Photovoltaic Devices: Preprint

    SciTech Connect (OSTI)

    Platt, H. A. S.; van Hest, M. F. A. M.; Li, Y.; Novak, J. P.

    2012-06-01

    Alternative solution-based techniques such as aerosol jet printing offer the dual benefits of contactless pattern deposition and high material utilization. We have used aerosol jet printing to investigate non-contact printed Al metal ink as a replacement for screen printed Al back contacts on wafer Si solar cells. This particle-based ink can be prepared at high loadings of 60 weight % metal, which enables rapid deposition of 1 - 10 um thick lines. Al lines printed on Si wafers and heated between 550 and 800 degrees C form low resistance contacts suitable for current extraction. The effectiveness of these printed Al back contacts has further been demonstrated by incorporating them into a series of 21 cm2 crystalline Si solar cells that produced a champion power conversion efficiency of 13%.

  4. Researchers find 3-D printed parts to provide low-cost, custom alternatives

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for laboratory equipment | Princeton Plasma Physics Lab Researchers find 3-D printed parts to provide low-cost, custom alternatives for laboratory equipment By Raphael Rosen February 26, 2015 Tweet Widget Google Plus One Share on Facebook 3-D printed parts provide the stands for the aluminum globes in PPPL's Planeterrella, a device that simulates Northern Lights. (Photo by Elle Starkman/PPPL Office of Communications) 3-D printed parts provide the stands for the aluminum globes in PPPL's

  5. Researchers find 3-D printed parts to provide low-cost, custom alternatives

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for laboratory equipment | Princeton Plasma Physics Lab Researchers find 3-D printed parts to provide low-cost, custom alternatives for laboratory equipment By Raphael Rosen February 26, 2015 Tweet Widget Google Plus One Share on Facebook 3-D printed parts provide the stands for the aluminum globes in PPPL's Planeterrella, a device that simulates Northern Lights. (Photo by Elle Starkman/PPPL Office of Communications) 3-D printed parts provide the stands for the aluminum globes in PPPL's

  6. Secretary Moniz Test Drives the 3D-Printed Shelby Cobra | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Secretary Moniz Test Drives the 3D-Printed Shelby Cobra Secretary Moniz Test Drives the 3D-Printed Shelby Cobra Addthis Topic Manufacturing Alternative Fuel Vehicles The 50th anniversary Shelby Cobra was printed at the Department of Energy's Manufacturing Demonstration Facility at Oak Ridge National Laboratory using the BAAM (Big Area Additive Manufacturing) machine and is intended as a "plug-and-play" laboratory on wheels. The vehicle will allow research and development of

  7. DOE Science Showcase - 3D Printing | OSTI, US Dept of Energy, Office of

    Office of Scientific and Technical Information (OSTI)

    Scientific and Technical Information 3D Printing The Critical Materials Institute speeds metals research with 3D printer. Image Credit: Ames Laboratory (Ames Lab). 3D printing is an additive manufacturing process that creates 3D objects directly from a computer model, depositing material layer by layer only where required. This technique, while still evolving, is projected to profoundly impact manufacturing. 3D printing can give industry new design flexibility, reduce energy use, and shorten

  8. Next Generation Lunch: Revealing the World's First 3D Printed Car (text

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    version) | Department of Energy Next Generation Lunch: Revealing the World's First 3D Printed Car (text version) Next Generation Lunch: Revealing the World's First 3D Printed Car (text version) Below is the text version for the Next Generation Lunch: Revealing the World's First 3D Printed Car Video. FILE NAME: AEMC_09172014_luncheonaddress_nextgeneration SPEAKER: Ladies and gentleman, welcome and good afternoon. Please give a warm welcome to Dr. Mark Johnson, U.S. Department of Energy.

  9. SU-E-T-455: Characterization of 3D Printed Materials for Proton Beam Therapy

    SciTech Connect (OSTI)

    Zou, W; Siderits, R; McKenna, M; Khan, A; Yue, N [Rutgers University, New Brunswick, NJ (United States); McDonough, J; Yin, L; Teo, B [University of Pennsylvania, Philadelphia, PA (United States); Fisher, T [Memorial Medical Center, Modesto, CA (United States)

    2014-06-01

    Purpose: The widespread availability of low cost 3D printing technologies provides an alternative fabrication method for customized proton range modifying accessories such as compensators and boluses. However the material properties of the printed object are dependent on the printing technology used. In order to facilitate the application of 3D printing in proton therapy, this study investigated the stopping power of several printed materials using both proton pencil beam measurements and Monte Carlo simulations. Methods: Five 34 cm cubes fabricated using three 3D printing technologies (selective laser sintering, fused-deposition modeling and stereolithography) from five printers were investigated. The cubes were scanned on a CT scanner and the depth dose curves for a mono-energetic pencil beam passing through the material were measured using a large parallel plate ion chamber in a water tank. Each cube was measured from two directions (perpendicular and parallel to printing plane) to evaluate the effects of the anisotropic material layout. The results were compared with GEANT4 Monte Carlo simulation using the manufacturer specified material density and chemical composition data. Results: Compared with water, the differences from the range pull back by the printed blocks varied and corresponded well with the material CT Hounsfield unit. The measurement results were in agreement with Monte Carlo simulation. However, depending on the technology, inhomogeneity existed in the printed cubes evidenced from CT images. The effect of such inhomogeneity on the proton beam is to be investigated. Conclusion: Printed blocks by three different 3D printing technologies were characterized for proton beam with measurements and Monte Carlo simulation. The effects of the printing technologies in proton range and stopping power were studied. The derived results can be applied when specific devices are used in proton radiotherapy.

  10. 3D-Printed Foam Outperforms Standard Materials | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3D-Printed Foam Outperforms Standard Materials 3D-Printed Foam Outperforms Standard Materials April 27, 2016 - 5:58pm Addthis News release from Lawrence Livermore Laboratory, April 27, 2016. Lawrence Livermore National Laboratory (LLNL) material scientists have found that 3D-printed foam works better than standard cellular materials in terms of durability and long-term mechanical performance. Foams, also known as cellular solids, are an important class of materials with applications ranging from

  11. Energy Department Unveils 3D-Printed Building; New Initiatives During

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Industry Day | Department of Energy Unveils 3D-Printed Building; New Initiatives During Industry Day Energy Department Unveils 3D-Printed Building; New Initiatives During Industry Day October 1, 2015 - 12:25pm Addthis The Energy Department announced several new and exciting innovations and programs during Industry Day held at Oak Ridge National Laboratory (ORNL) in Tennessee Sept. 23-24. This included unveiling a 3-D printed building with integrated energy storage via bidirectional wireless

  12. System and method for 3D printing of aerogels

    DOE Patents [OSTI]

    Worsley, Marcus A.; Duoss, Eric; Kuntz, Joshua; Spadaccini, Christopher; Zhu, Cheng

    2016-03-08

    A method of forming an aerogel. The method may involve providing a graphene oxide powder and mixing the graphene oxide powder with a solution to form an ink. A 3D printing technique may be used to write the ink into a catalytic solution that is contained in a fluid containment member to form a wet part. The wet part may then be cured in a sealed container for a predetermined period of time at a predetermined temperature. The cured wet part may then be dried to form a finished aerogel part.

  13. Eddy current gauge for monitoring displacement using printed circuit coil

    DOE Patents [OSTI]

    Visioli, Jr., Armando J.

    1977-01-01

    A proximity detection system for non-contact displacement and proximity measurement of static or dynamic metallic or conductive surfaces is provided wherein the measurement is obtained by monitoring the change in impedance of a flat, generally spiral-wound, printed circuit coil which is excited by a constant current, constant frequency source. The change in impedance, which is detected as a corresponding change in voltage across the coil, is related to the eddy current losses in the distant conductive material target. The arrangement provides for considerable linear displacement range with increased accuracies, stability, and sensitivity over the entire range.

  14. I United States Government Printing Office SUPERINTENDENT OF WCUMENTS

    Office of Legacy Management (LM)

    onSree;sional atecord I United States Government Printing Office SUPERINTENDENT OF WCUMENTS Wash~ngtm. D.C 20402 OFFEIAL BUSINESS Penalty for prwate use. 9300 Congressmnal Record (USPS 087-390) United States of America . :- PROCEEDINGS AND DEBATES OF THE 98' hCONGRESS, FIRST SESSION 0 * U.S -C3 Postage and Fees Pad U S Governme3n7t5Prmt~ng Office SECOND CLASS NEWSPAPER H-4578 ' CQNGRESSIONAL RECORD - HOUSE June 28, 1983 I H.J. Res. 273: Mr. BOLAND, Mr. WAXMAN, Mr. Oeeasrrk. Mr. BEDELL. Mr. BONER

  15. V-148: Novell iPrint Client Unspecified Buffer Overflow Vulnerability

    Broader source: Energy.gov [DOE]

    A vulnerability has been reported in Novell iPrint Client, which can be exploited by malicious people to compromise a user's system

  16. Secretary Moniz Tours the 3D-Printed Shelby Cobra | Department...

    Energy Savers [EERE]

    in Knoxville, Tennessee, developed a finishing process that bonds the clear coat and paint layers to the printed car parts' resulting in the highest quality finish possible in...

  17. EERE Success Story-3D Printing Enables New Generation of Heat Exchangers

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    | Department of Energy 3D Printing Enables New Generation of Heat Exchangers EERE Success Story-3D Printing Enables New Generation of Heat Exchangers March 17, 2016 - 10:32am Addthis The University of Maryland used direct metal printing—a 3D printing technology—to manufacture a unique miniaturized air-to-refrigerant heat exchanger as a single, continuous piece. Image: University of Maryland, Center for Environmental Energy Engineering. The University of Maryland used direct metal

  18. In Situ X-Ray Scattering Helps Optimize Printed Solar Cells

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    In Situ X-Ray Scattering Helps Optimize Printed Solar Cells In Situ X-Ray Scattering Helps Optimize Printed Solar Cells Print Wednesday, 25 February 2015 00:00 Plastic solar cells that can be printed on flexible sheets with an ink-like solution show a lot of potential as a source of lightweight, inexpensive renewable energy. However, much of the power-conversion efficiency of such cells gets lost in the translation from small-scale lab studies to large-scale manufacturing processes. To help gain

  19. ORNL Unveils 3D-Printed Home and Vehicle with the Unique Ability...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    efforts of the the lab's Additive Manufacturing Integrated Energy (AMIE) demonstration. ... by natural gas, were both printed using additive manufacturing via a large-scale 3D ...

  20. EERE Success Story—Just Plain Cool, the 3D Printed Shelby Cobra

    Broader source: Energy.gov [DOE]

    Indistinguishable from conventional production vehicles on display, the 3D printed Shelby Cobra celebrated its 50th anniversary at the Detroit Auto Show in early January.

  1. Development and Optimization of Viable Human Platforms through 3D Printing

    SciTech Connect (OSTI)

    Parker, Paul R.; Moya, Monica L.; Wheeler, Elizabeth K.

    2015-08-21

    3D printing technology offers a unique method for creating cell cultures in a manner far more conducive to accurate representation of human tissues and systems. Here we print cellular structures capable of forming vascular networks and exhibiting qualities of natural tissues and human systems. This allows for cheaper and readily available sources for further study of biological and pharmaceutical agents.

  2. Multi-Layer Inkjet Printed Contacts for Silicon Solar Cells: Preprint

    SciTech Connect (OSTI)

    Curtis, C. J.; van hest, M.; Miedaner, A.; Kaydanova, T.; Smith, L.; Ginley, D. S.

    2006-05-01

    Ag, Cu, and Ni metallizations were inkjet printed with near vacuum deposition quality. The approach developed can be easily extended to other conductors such as Pt, Pd, Au, etc. Thick highly conducting lines of Ag and Cu demonstrating good adhesion to glass, Si, and printed circuit board (PCB) have been printed at 100-200 C in air and N2 respectively. Ag grids were inkjet-printed on Si solar cells and fired through the silicon nitride AR layer at 850 C, resulting in 8% cells. Next generation inks, including an ink that etches silicon nitride, have now been developed. Multi-layer inkjet printing of the etching ink followed by Ag ink produced contacts under milder conditions and gave solar cells with efficiencies as high as 12%.

  3. An RFC 1179 Compatible Remote Print Server for Windows 3.1

    Energy Science and Technology Software Center (OSTI)

    1993-11-09

    Internet RFC 1179 describes the protocol to be used for printing files on a remote printer in a TCP/IP network. The protocol is client/server, meaning that the client initiates the print request, and the server receives the request and performs the actual printing locally. This protocol has been in long use on Unix systems derived from the Berkeley Software Distribution, such as DEC''s Ultrix and Sun''s SunOS. LPD Services implements the server portion of thismore » protocol. It handles both the network communication and conformance with the protocol, and printing using the Microsoft Windows device independent printing interface.« less

  4. Local Motors Begins Their Six Day Quest to 3D Print the ‘Strati’ Car Live at IMTS

    Broader source: Energy.gov [DOE]

    An article detailing Local Motors' preparation to 3D print a car at the September 2014 International Manufacturing Technology Show.

  5. Apparatus And Method Of Using Flexible Printed Circuit Board In Optical Transceiver Device

    DOE Patents [OSTI]

    Anderson, Gene R.; Armendariz, Marcelino G.; Bryan, Robert P.; Carson, Richard F.; Duckett, III, Edwin B.; McCormick, Frederick B.; Peterson, David W.; Peterson, Gary D.; Reysen, Bill H.

    2005-03-15

    This invention relates to a flexible printed circuit board that is used in connection with an optical transmitter, receiver or transceiver module. In one embodiment, the flexible printed circuit board has flexible metal layers in between flexible insulating layers, and the circuit board comprises: (1) a main body region orientated in a first direction having at least one electrical or optoelectronic device; (2) a plurality of electrical contact pads integrated into the main body region, where the electrical contact pads function to connect the flexible printed circuit board to an external environment; (3) a buckle region extending from one end of the main body region; and (4) a head region extending from one end of the buckle region, and where the head region is orientated so that it is at an angle relative to the direction of the main body region. The electrical contact pads may be ball grid arrays, solder balls or land-grid arrays, and they function to connect the circuit board to an external environment. A driver or amplifier chip may be adapted to the head region of the flexible printed circuit board. In another embodiment, a heat spreader passes along a surface of the head region of the flexible printed circuit board, and a window is formed in the head region of the flexible printed circuit board. Optoelectronic devices are adapted to the head spreader in such a manner that they are accessible through the window in the flexible printed circuit board.

  6. In Situ X-Ray Scattering Helps Optimize Printed Solar Cells

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    In Situ X-Ray Scattering Helps Optimize Printed Solar Cells Print Plastic solar cells that can be printed on flexible sheets with an ink-like solution show a lot of potential as a source of lightweight, inexpensive renewable energy. However, much of the power-conversion efficiency of such cells gets lost in the translation from small-scale lab studies to large-scale manufacturing processes. To help gain an understanding of why that happens, researchers have developed at the ALS a miniature

  7. In Situ X-Ray Scattering Helps Optimize Printed Solar Cells

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    In Situ X-Ray Scattering Helps Optimize Printed Solar Cells Print Plastic solar cells that can be printed on flexible sheets with an ink-like solution show a lot of potential as a source of lightweight, inexpensive renewable energy. However, much of the power-conversion efficiency of such cells gets lost in the translation from small-scale lab studies to large-scale manufacturing processes. To help gain an understanding of why that happens, researchers have developed at the ALS a miniature

  8. In Situ X-Ray Scattering Helps Optimize Printed Solar Cells

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    In Situ X-Ray Scattering Helps Optimize Printed Solar Cells Print Plastic solar cells that can be printed on flexible sheets with an ink-like solution show a lot of potential as a source of lightweight, inexpensive renewable energy. However, much of the power-conversion efficiency of such cells gets lost in the translation from small-scale lab studies to large-scale manufacturing processes. To help gain an understanding of why that happens, researchers have developed at the ALS a miniature

  9. The Future of Manufacturing Takes Shape: 3D Printed Car on Display at

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Manufacturing Summit | Department of Energy The Future of Manufacturing Takes Shape: 3D Printed Car on Display at Manufacturing Summit The Future of Manufacturing Takes Shape: 3D Printed Car on Display at Manufacturing Summit September 17, 2014 - 9:50am Addthis WORLD&#039;S FIRST 1 of 6 WORLD'S FIRST The world's first 3D-printed car on display at the International Manufacturing Technology Show in Chicago last week. Arizona-based Local Motors, and Cincinnati Incorporated teamed with Oak

  10. Direct laser immobilization of photosynthetic material on screen printed electrodes for amperometric biosensor

    SciTech Connect (OSTI)

    Boutopoulos, Christos; Zergioti, Ioanna; Touloupakis, Eleftherios; Pezzotti, Ittalo; Giardi, Maria Teresa

    2011-02-28

    This letter demonstrates the direct laser printing of photosynthetic material onto low cost nonfunctionalized screen printed electrodes for the fabrication of photosynthesis-based amperometric biosensors. The high kinetic energy of the transferred material induces direct immobilization of the thylakoids onto the electrodes without the use of linkers. This type of immobilization is able to establish efficient electrochemical contact between proteins and electrode, stabilizing the photosynthetic biomolecule and transporting electrons to the solid state device with high efficiency. The functionality of the laser printed biosensors was evaluated by the detection of a common herbicide such as Linuron.

  11. In Situ X-Ray Scattering Helps Optimize Printed Solar Cells

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    In Situ X-Ray Scattering Helps Optimize Printed Solar Cells Print Plastic solar cells that can be printed on flexible sheets with an ink-like solution show a lot of potential as a source of lightweight, inexpensive renewable energy. However, much of the power-conversion efficiency of such cells gets lost in the translation from small-scale lab studies to large-scale manufacturing processes. To help gain an understanding of why that happens, researchers have developed at the ALS a miniature

  12. In Situ X-Ray Scattering Helps Optimize Printed Solar Cells

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    In Situ X-Ray Scattering Helps Optimize Printed Solar Cells Print Plastic solar cells that can be printed on flexible sheets with an ink-like solution show a lot of potential as a source of lightweight, inexpensive renewable energy. However, much of the power-conversion efficiency of such cells gets lost in the translation from small-scale lab studies to large-scale manufacturing processes. To help gain an understanding of why that happens, researchers have developed at the ALS a miniature

  13. In Situ X-Ray Scattering Helps Optimize Printed Solar Cells

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    In Situ X-Ray Scattering Helps Optimize Printed Solar Cells Print Plastic solar cells that can be printed on flexible sheets with an ink-like solution show a lot of potential as a source of lightweight, inexpensive renewable energy. However, much of the power-conversion efficiency of such cells gets lost in the translation from small-scale lab studies to large-scale manufacturing processes. To help gain an understanding of why that happens, researchers have developed at the ALS a miniature

  14. Bob Ellis designs a PPPL first: A 3D printed mirror for microwave launchers

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    | Princeton Plasma Physics Lab Bob Ellis designs a PPPL first: A 3D printed mirror for microwave launchers By John Greenwald October 28, 2014 Tweet Widget Google Plus One Share on Facebook Bob Ellis with a 3D-printed plastic prototype for a non-mirror part of the launcher. (Photo by Elle Starkman/PPPL Office of Communications) Bob Ellis with a 3D-printed plastic prototype for a non-mirror part of the launcher. Gallery: Completed stainless steel and copper mirror system. (Photo by Elle

  15. EERE Success Story-ORNL Unveils 3D-Printed Home and Vehicle with the

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Unique Ability to Power One Another | Department of Energy ORNL Unveils 3D-Printed Home and Vehicle with the Unique Ability to Power One Another EERE Success Story-ORNL Unveils 3D-Printed Home and Vehicle with the Unique Ability to Power One Another November 17, 2015 - 10:42am Addthis EERE Success Story—ORNL Unveils 3D-Printed Home and Vehicle with the Unique Ability to Power One Another In September, the Department of Energy's Oak Ridge National Laboratory (ORNL) announced successful

  16. Researchers find 3-D printed parts to provide low-cost, custom...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Researchers find 3-D printed parts to provide low-cost, custom alternatives for laboratory equipment By Raphael Rosen February 26, 2015 Tweet Widget Google Plus One Share on...

  17. EERE Success Story-Just Plain Cool, the 3D Printed Shelby Cobra...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    This innovative 3D printing process took just six weeks, and the final result was a glistening roadster fitted with a 100-kilowatt electric motor that can still go zero to 60 mph ...

  18. E-print Network Web Log News: Research Communications for Scientists...

    Office of Scientific and Technical Information (OSTI)

    Description This Web Log provides the latest information about changes to E-print Network ... questions, concerns and other input by using the Contact Us page. Web Log Archive

  19. Frequently Asked Questions (FAQ) for the E-print Network -- Energy...

    Office of Scientific and Technical Information (OSTI)

    ... The E-print Network pulls these vast and widely dispersed data together through a Deep Web ... available on the Web through a browse capability across more than ten thousand sites. ...

  20. The 3D-Printed Shelby Cobra: Defining Rapid Innovation | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    It's been hard to miss in the media and on its almost non-stop road tour, but AMO wanted you to know that our 3D-printed EV version of the 50th anniversary Shelby Cobra just left ...

  1. Novel 3-D Printed Inverters for Electric Vehicles Can Improve EV Power and Efficiency

    Broader source: Energy.gov [DOE]

    Plug-in electric vehicle technologies are on their way to being even lighter, more powerful and more efficient with the advent of power inverters created by 3-D printing and novel semiconductors.

  2. Notice of Intent to Develop DOE G 436.1-1, Sustainable Print...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    promote energy security, protect the interests of taxpayers, and safeguard the health of the environment. Notice of Intent to Develop DOE G 436.1-1, Sustainable Print Management...

  3. Print-based Manufacturing of Integrated, Low Cost, High Performance SSL

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Luminaires | Department of Energy Print-based Manufacturing of Integrated, Low Cost, High Performance SSL Luminaires Print-based Manufacturing of Integrated, Low Cost, High Performance SSL Luminaires Lead Performer: Eaton Corporation - Menomonee Falls, WI Partners: - Heraeus Materials Technology, LLC - Conshohocken, PA - Haiku Tech, Inc - Miami, FL - Eaton Cooper Lighting Innovation Center - Peachtree City, GA DOE Total Funding: $2,468,672 Cost Share: $2,468,676 Project Term: 9/15/2013 -

  4. Intense X-rays expose tiny flaws in 3-D printed titanium that can lead to

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    breakage over time | Argonne National Laboratory Intense X-rays expose tiny flaws in 3-D printed titanium that can lead to breakage over time By Katie Elyce Jones * March 4, 2016 Tweet EmailPrint Titanium is strong but light - a desirable property among metals. In the twentieth century, titanium was used in military aircraft and equipment and commercial jets. Today, we find this tough and flexible metal all around us - in sports gear, tools, surgical and dental implants, prosthetics,

  5. Analytical Study on Thermal and Mechanical Design of Printed Circuit Heat Exchanger

    SciTech Connect (OSTI)

    Su-Jong Yoon; Piyush Sabharwall; Eung-Soo Kim

    2013-09-01

    The analytical methodologies for the thermal design, mechanical design and cost estimation of printed circuit heat exchanger are presented in this study. In this study, three flow arrangements of parallel flow, countercurrent flow and crossflow are taken into account. For each flow arrangement, the analytical solution of temperature profile of heat exchanger is introduced. The size and cost of printed circuit heat exchangers for advanced small modular reactors, which employ various coolants such as sodium, molten salts, helium, and water, are also presented.

  6. Structural color printing based on plasmonic metasurfaces of perfect light absorption

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Cheng, Fei; Gao, Jie; Luk, Ting S.; Yang, Xiaodong

    2015-06-05

    Subwavelength structural color filtering and printing technologies employing plasmonic nanostructures have recently been recognized as an important and beneficial complement to the traditional colorant-based pigmentation. However, the color saturation, brightness and incident angle tolerance of structural color printing need to be improved to meet the application requirement. Here we demonstrate a structural color printing method based on plasmonic metasurfaces of perfect light absorption to improve color performances such as saturation and brightness. Thin-layer perfect absorbers with periodic hole arrays are designed at visible frequencies and the absorption peaks are tuned by simply adjusting the hole size and periodicity. Near perfectmore » light absorption with high quality factors are obtained to realize high-resolution, angle-insensitive plasmonic color printing with high color saturation and brightness. Moreover, the fabricated metasurfaces can be protected with a protective coating for ambient use without degrading performances. The demonstrated structural color printing platform offers great potential for applications ranging from security marking to information storage.« less

  7. Photo Gallery: 3D Printing Brings Classic Shelby Cobra to Life | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy 3D Printing Brings Classic Shelby Cobra to Life Photo Gallery: 3D Printing Brings Classic Shelby Cobra to Life April 15, 2015 - 4:02pm Addthis Zero to 60 in under five seconds. Concept to reality in just six weeks. 1 of 22 Zero to 60 in under five seconds. Concept to reality in just six weeks. The classic Shelby Cobra roadster turns 50 in 2015. To celebrate, a team of engineers at the Department of Energy's Oak Ridge National Laboratory set out to create a replica of this iconic

  8. Sintering Kinetics of Inkjet Printed Conductive Silver Lines on Insulating Plastic Substrate

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Zhou, Wenchao; List, III, Frederick Alyious; Duty, Chad E; Babu, Sudarsanam Suresh

    2015-01-24

    This paper focuses on sintering kinetics of inkjet printed lines containing silver nanoparticles deposited on a plastic substrate. Upon heat treatment, the change of resistance in the printed lines was measured as a function of time and sintering temperatures from 150 to 200 C. A critical temperature was observed for the sintering process, beyond which there was no further reduction in resistance. Analysis shows the critical temperature correlates to the boiling point of the solvent, which is attributed to a liquid-mediated sintering mechanism. It is demonstrated that the sintering process shuts down after the solvent has completely evaporated.

  9. Printed assemblies of ultrathin, microscale inorganic light emitting diodes for deformable and semitransparent displays

    DOE Patents [OSTI]

    Rogers, John A; Nuzzo, Ralph; Kim, Hoon-sik; Brueckner, Eric; Park, Sang Il; Kim, Rak Hwan

    2014-10-21

    Described herein are printable structures and methods for making, assembling and arranging electronic devices. A number of the methods described herein are useful for assembling electronic devices where one or more device components are embedded in a polymer which is patterned during the embedding process with trenches for electrical interconnects between device components. Some methods described herein are useful for assembling electronic devices by printing methods, such as by dry transfer contact printing methods. Also described herein are GaN light emitting diodes and methods for making and arranging GaN light emitting diodes, for example for display or lighting systems.

  10. Assessing the operational life of flexible printed boards intended for continuous flexing applications : a case study.

    SciTech Connect (OSTI)

    Beck, David Franklin

    2011-01-01

    Through the vehicle of a case study, this paper describes in detail how the guidance found in the suite of IPC (Association Connecting Electronics Industries) publications can be applied to develop a high level of design assurance that flexible printed boards intended for continuous flexing applications will satisfy specified lifetime requirements.

  11. Emerging Technologies in the Built Environment: Geographic Information Science (GIS), 3D Printing, and Additive Manufacturing

    SciTech Connect (OSTI)

    New, Joshua Ryan

    2014-01-01

    Abstract 1: Geographic information systems emerged as a computer application in the late 1960s, led in part by projects at ORNL. The concept of a GIS has shifted through time in response to new applications and new technologies, and is now part of a much larger world of geospatial technology. This presentation discusses the relationship of GIS and estimating hourly and seasonal energy consumption profiles in the building sector at spatial scales down to the individual parcel. The method combines annual building energy simulations for city-specific prototypical buildings and commonly available geospatial data in a GIS framework. Abstract 2: This presentation focuses on 3D printing technologies and how they have rapidly evolved over the past couple of years. At a basic level, 3D printing produces physical models quickly and easily from 3D CAD, BIM (Building Information Models), and other digital data. Many AEC firms have adopted 3D printing as part of commercial building design development and project delivery. This presentation includes an overview of 3D printing, discusses its current use in building design, and talks about its future in relation to the HVAC industry. Abstract 3: This presentation discusses additive manufacturing and how it is revolutionizing the design of commercial and residential facilities. Additive manufacturing utilizes a broad range of direct manufacturing technologies, including electron beam melting, ultrasonic, extrusion, and laser metal deposition for rapid prototyping. While there is some overlap with the 3D printing talk, this presentation focuses on the materials aspect of additive manufacturing and also some of the more advanced technologies involved with rapid prototyping. These technologies include design of carbon fiber composites, lightweight metals processing, transient field processing, and more.

  12. Fabrication of contacts for silicon solar cells including printing burn through layers

    DOE Patents [OSTI]

    Ginley, David S; Kaydanova, Tatiana; Miedaner, Alexander; Curtis, Calvin J; Van Hest, Marinus Franciscus Antonius Maria

    2014-06-24

    A method for fabricating a contact (240) for a solar cell (200). The method includes providing a solar cell substrate (210) with a surface that is covered or includes an antireflective coating (220). For example, the substrate (210) may be positioned adjacent or proximate to an outlet of an inkjet printer (712) or other deposition device. The method continues with forming a burn through layer (230) on the coating (220) by depositing a metal oxide precursor (e.g., using an inkjet or other non-contact printing method to print or apply a volume of liquid or solution containing the precursor). The method includes forming a contact layer (240) comprising silver over or on the burn through layer (230), and then annealing is performed to electrically connect the contact layer (240) to the surface of the solar cell substrate (210) through a portion of the burn through layer (230) and the coating (220).

  13. GraphPrints: Towards a Graph Analytic Method for Network Anomaly Detection

    SciTech Connect (OSTI)

    Harshaw, Chris R; Bridges, Robert A; Iannacone, Michael D; Reed, Joel W; Goodall, John R

    2016-01-01

    This paper introduces a novel graph-analytic approach for detecting anomalies in network flow data called \\textit{GraphPrints}. Building on foundational network-mining techniques, our method represents time slices of traffic as a graph, then counts graphlets\\textemdash small induced subgraphs that describe local topology. By performing outlier detection on the sequence of graphlet counts, anomalous intervals of traffic are identified, and furthermore, individual IPs experiencing abnormal behavior are singled-out. Initial testing of GraphPrints is performed on real network data with an implanted anomaly. Evaluation shows false positive rates bounded by 2.84\\% at the time-interval level, and 0.05\\% at the IP-level with 100\\% true positive rates at both.

  14. LLNL researchers outline what happens during metal 3D printing, enhancing

    National Nuclear Security Administration (NNSA)

    confidence | National Nuclear Security Administration researchers outline what happens during metal 3D printing, enhancing confidence Friday, February 19, 2016 - 12:00am NNSA Blog From left, Lawrence Livermore National Laboratory researchers Ibo Matthews, a principal investigator leading the lab's effort on the joint open source software project; Wayne King, director of the Accelerated Certification of Additively Manufactured Metals Initiative; and Gabe Guss, engineering associate - examine

  15. Polytechnic Institute of New York University Researchers Represented in the E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    EDUconnections Spotlight Polytechnic Institute of New York University Researchers Represented in the E-print Network Researcher/Research Institution Web page Aronov, Boris - Department of Computer Science and Engineering, Polytechnic Institute of New York University http://cis.poly.edu/~aronov/research. html Brönnimann, Hervé - Department of Computer Science and Engineering, Polytechnic Institute of New York University http://photon.poly.edu/~hbr/publis. html Chiang, Yi-Jen - Department of

  16. In the OSTI Collections: 3-D Printing and Other Additive Manufacturing

    Office of Scientific and Technical Information (OSTI)

    Technologies | OSTI, US Dept of Energy, Office of Scientific and Technical Information 3-D Printing and Other Additive Manufacturing Technologies Dr. Watson computer sleuthing scientist. Article Acknowledgement: Dr. William N. Watson, Physicist DOE Office of Scientific and Technical Information Understanding Electron Beam Melting Is Additive Manufacturing Suitable? Two Projects Other Materials Additive Manufacturing Technologies References Reports Available Through OSTI's SciTech Connect

  17. DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS OF THE DOCUMENT IN IDM

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    25 Feb 2016 DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS OF THE DOCUMENT IN IDM Technical Specifications (In-Cash Procurement) FWK Contract - Support for safety and accident analyses The purpose of this contract is to provide support to the Plant Engineering Department in the area of safety analyses and accident analyses. Technical expertise from a specialist supplier in these analyses including radiation protection, confinement, internal and external risks, etc, will provide

  18. What Makes AMIE, the 3D printed home and vehicle, unique?

    Broader source: Energy.gov [DOE]

    AMIE, or the Additive Manufacturing Integrated Energy project, is one of the world’s first 3D printed houses. But it’s not just a house. It’s also a vehicle. It’s also solar panels, and energy storage, and intelligent controls. It’s an entire integrated energy system, and it’s changing how we think about generating, storing, and using energy.

  19. Selective light sintering of Aerosol-Jet printed silver nanoparticle inks on polymer substrates

    SciTech Connect (OSTI)

    Schuetz, K. E-mail: hoerber@faps.uni-erlangen.de Hoerber, J. E-mail: hoerber@faps.uni-erlangen.de Franke, J. E-mail: hoerber@faps.uni-erlangen.de

    2014-05-15

    Printing silver nanoparticle inks to generate conductive structures for electronics on polymer substrates has gained increasing relevance in recent years. In this context, the Aerosol-Jet Technology is well suited to print silver ink on 3D-Molded Interconnect Devices (MID). The deposited ink requires thermal post-treatment to obtain sufficient electrical conductivity and adhesion. However, commonly used oven sintering cannot be applied for many thermoplastic substrates due to low melting temperatures. In this study a new sintering technology, selective light sintering, is presented, based on the focused, continuous light beam of a xenon lamp. Sintering experiments were conducted with Aerosol-Jet printed structures on various polycarbonate (PC) substrates. Especially on neat, light transparent PC, silver tracks were evenly sintered with marginal impact to the substrate. Electrical conductivities significantly exceed the values obtained with conventional oven sintering. Adhesive strength is sufficient for conductive tracks. Experiments with non-transparent PC substrates led to substrate damage due to increased light absorption. Therefore a concept for a variation of light sintering was developed, using optical filters. First experiments showed significant reduction of substrate damage and good sintering qualities. The highly promising results of the conducted experiments provide a base for further investigations to increase adhesion and qualifying the technology for MID applications and a broad spectrum of thermoplastic substrates.

  20. Flow-enhanced solution printing of all-polymer solar cells

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Diao, Ying; Zhou, Yan; Kurosawa, Tadanori; Shaw, Leo; Wang, Cheng; Park, Steve; Guo, Yikun; Reinspach, Julia A.; Gu, Kevin; Gu, Xiaodan; et al

    2015-08-12

    Morphology control of solution coated solar cell materials presents a key challenge limiting their device performance and commercial viability. Here we present a new concept for controlling phase separation during solution printing using an all-polymer bulk heterojunction solar cell as a model system. The key aspect of our method lies in the design of fluid flow using a microstructured printing blade, on the basis of the hypothesis of flow-induced polymer crystallization. Our flow design resulted in a similar to 90% increase in the donor thin film crystallinity and reduced microphase separated donor and acceptor domain sizes. The improved morphology enhancedmore » all metrics of solar cell device performance across various printing conditions, specifically leading to higher short-circuit current, fill factor, open circuit voltage and significantly reduced device-to-device variation. However, we expect our design concept to have broad applications beyond all-polymer solar cells because of its simplicity and versatility.« less

  1. From: Jane Wilsdorf To: Congestion Study Comments Subject: Comment

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The compensation cannot begin to cover the all of the losses, tangible and intangible that ... Third, the eastern states should develop the utility scale wind resources conveniently ...

  2. DuPont Displays Develops Low-Cost Method of Printing OLED Panels

    Broader source: Energy.gov [DOE]

    DuPont Displays Inc. (DDI) has developed a novel way of printing color-tunable OLED lighting panels that keeps manufacturing costs low. The method involves processing the organic layers from solution, with most of the process steps taking place under atmospheric conditions rather than in a high vacuum. Industry-standard slot-coating methods are used in conjunction with nozzle printing—in which the solutions of organic materials are continuously jetted through an array of nozzles moving at high speed—allowing the light-emitting materials to be spatially patterned.

  3. Notice of Intent to Develop DOE Guide 436.1-1, Sustainable Print Management

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2015-03-19

    The Guide will support Executive Order (E.O.) 13693, Planning for Federal Sustainability in the Next Decade. signed on March 19, 2015, which requires the Federal Government to lead by example to create a clean energy economy that will increase prosperity, promote energy security, protect the interests of taxpayers, and safeguard the health of the environment. Under E.O. 13693, Federal agencies are required to increase energy efficiency, eliminate waste, and leverage agency acquisitions by reducing costs and resources in their printing activities. This Guide also aligns with the requirements of DOE O 436.1, Departmental Sustainability.

  4. DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS OF THE DOCUMENT IN IDM

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    11 Mar 2016 DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS OF THE DOCUMENT IN IDM Memorandum / Note Summary of Technical specification Implementation and Support of PDM/PLM Solutions Technical specification Implementation and Support of PDM/PLM Solutions Approval Process Name Action Affiliation Author Delaplagne J.- D. 11 Mar 2016:signed IO/DG/COO/CIO/IT Co-Authors Chaumette C. Decanis C. Guillaud O. 10 Mar 2016:signed 10 Mar 2016:signed 10 Mar 2016:signed IO/DG/COO/CIO/IT

  5. SABIC’s Carbon Fiber-Reinforced Material used to Produce the World’s First 3D-Printed Vehicle at IMTS 2014

    Broader source: Energy.gov [DOE]

    An article with background information on SABIC and their carbon fiber-reinforced material, which is used in the world's first 3D-printed car.

  6. Characterizing performances of solder paste printing process at flexible manufacturing lines

    SciTech Connect (OSTI)

    Siew, Jit Ping; Low, Heng Chin; Teoh, Ping Chow

    2015-02-03

    Solder paste printing (SPP) has been a challenge on printed circuit board (PCB) manufacturing, evident by the proliferation of solder paste inspection equipment, or substituted by rigorous non-value added activity of manual inspections. The objective of this study is to characterize the SPP performance of various products manufactured in flexible production lines with different equipment configurations, and determine areas for process improvement. The study began by collecting information on SPP performance relative to component placement (CP) process, and to the proportion of mixed products. Using a clustering algorithm to group similar elements together, SPP performance across all product-production line pairs are statistically modeled to discover the trend and the influential factors. The main findings are: (a) Ratio of overall dpku for CP and SPP processes are 2:1; (b) logistic regression models of SPP performance indicated that only effects of product-production line and solder paste printer configuration are significant; (c) PCB circuitry design with BGA components and single solder paste printer line configurations generated the highest monthly defects, with the highest variation in the latter.

  7. Binder-free highly conductive graphene laminate for low cost printed radio frequency applications

    SciTech Connect (OSTI)

    Huang, Xianjun; Leng, Ting; Zhang, Xiao; Hu, Zhirun; Chen, Jia Cing; Chang, Kuo Hsin; Geim, Andre K.; Novoselov, Kostya S.

    2015-05-18

    In this paper, we demonstrate realization of printable radio frequency identification (RFID) antenna by low temperature processing of graphene ink. The required ultra-low resistance is achieved by rolling compression of binder-free graphene laminate. With compression, the conductivity of graphene laminate is increased by more than 50 times compared to that of as-deposited one. Graphene laminate with conductivity of 4.3??10{sup 4?}S/m and sheet resistance of 3.8 ?/sq (with thickness of 6??m) is presented. Moreover, the formation of graphene laminate from graphene ink reported here is simple and can be carried out in low temperature (100?C), significantly reducing the fabrication costs. A dipole antenna based on the highly conductive graphene laminate is further patterned and printed on a normal paper to investigate its RF properties. The performance of the graphene laminate antenna is experimentally measured. The measurement results reveal that graphene laminate antenna can provide practically acceptable return loss, gain, bandwidth, and radiation patterns, making it ideal for low cost printed RF applications, such as RFID tags and wearable wireless sensor networks.

  8. Novel Low Cost Organic Vapor Jet Printing of Striped High Efficiency Phosphorescent OLEDs for White Lighting

    SciTech Connect (OSTI)

    Mike Hack

    2008-12-31

    In this program, Universal Display Corporation and University of Michigan proposed to integrate three innovative concepts to meet the DOE's Solid State Lighting (SSL) goals: (1) high-efficiency phosphorescent organic light emitting device (PHOLED{trademark}) technology, (2) a white lighting design that is based on a series of red, green and blue OLED stripes, and (3) the use of a novel cost-effective, high rate, mask-less deposition process called organic vapor jet printing (OVJP). Our PHOLED technology offers up to four-times higher power efficiency than other OLED approaches for general lighting. We believe that one of the most promising approaches to maximizing the efficiency of OLED lighting sources is to produce stripes of the three primary colors at such a pitch (200-500 {mu}m) that they appear as a uniform white light to an observer greater than 1 meter (m) away from the illumination source. Earlier work from a SBIR Phase 1 entitled 'White Illumination Sources Using Striped Phosphorescent OLEDs' suggests that stripe widths of less than 500 {mu}m appear uniform from a distance of 1m without the need for an external diffuser. In this program, we intend to combine continued advances in this PHOLED technology with the striped RGB lighting design to demonstrate a high-efficiency, white lighting source. Using this background technology, the team has focused on developing and demonstrating the novel cost-effective OVJP process to fabricate these high-efficiency white PHOLED light sources. Because this groundbreaking OVJP process is a direct printing approach that enables the OLED stripes to be printed without a shadow mask, OVJP offers very high material utilization and high throughput without the costs and wastage associated with a shadow mask (i.e. the waste of material that deposits on the shadow mask itself). As a direct printing technique, OVJP also has the potential to offer ultra-high deposition rates (> 1,000 Angstroms/second) for any size or shaped features. As a result, we believe that this work will lead to the development of a cost-effective manufacturing solution to produce very-high efficiency OLEDs. By comparison to more common ink-jet printing (IJP), OVJP can also produce well-defined patterns without the need to pattern the substrate with ink wells or to dry/anneal the ink. In addition, the material set is not limited by viscosity and solvent solubility. During the program we successfully demonstrated a 6-inch x 6-inch PHOLED lighting panel consisting of fine-featured red, green and blue (R-G-B) stripes (1mm width) using an OVJP deposition system that was designed, procured and installed into UDC's cleanroom as part of this program. This project will significantly accelerate the DOE's ability to meet its 2015 DOE SSL targets of 70-150 lumens/Watt and less than $10 per 1,000 lumens for high CRI lighting index (76-90). Coupled with a low cost manufacturing path through OVJP, we expect that this achievement will enable the DOE to achieve its 2015 performance goals by the year 2013, two years ahead of schedule. As shown by the technical work performed under this program, we believe that OVJP is a very promising technology to produce low cost, high efficacy, color tunable light sources. While we have made significant progress to develop OVJP technology and build a pilot line tool to study basic aspects of the technology and demonstrate a lighting panel prototype, further work needs to be performed before its full potential and commercial viability can be fully assessed.

  9. The Study and Implementation of Electrically Small Printed Antennas for an Integrated Transceiver Design

    SciTech Connect (OSTI)

    Speer, Pete

    2009-04-15

    This work focuses on the design and evaluation of the inverted-F, meandering-monopole, and loop antenna geometries. These printed antennas are studied with the goal of identifying which is suitable for use in a miniaturized transceiver design and which has the ability to provide superior performance using minimal Printed Circuit Board (PCB) space. As a result, the main objective is to characterize tradeoffs and identify which antenna provides the best compromise among volume, bandwidth and efficiency. For experimentation purposes, three types of meandering-monopole antenna are examined resulting in five total antennas for the study. The performance of each antenna under study is evaluated based upon return loss, operational bandwidth, and radiation pattern characteristics. For our purposes, return loss is measured using the S11-port reflection coefficient which helps to characterize how well the small antenna is able to be efficiently fed. Operational bandwidth is measured as the frequency range over which the antenna maintains 2:1 Voltage Standing Wave Ratio (VSWR) or equivalently has 10-dB return loss. Ansoft High Frequency Structure Simulator (HFSS) is used to simulate expected resonant frequency, bandwidth, VSWR, and radiation pattern characteristics. Ansoft HFSS simulation is used to provide a good starting point for antenna design before actual prototype are built using an LPKF automated router. Simulated results are compared with actual measurements to highlight any differences and help demonstrate the effects of antenna miniaturization. Radiation characteristics are measured illustrating how each antenna is affected by the influence of a non-ideal ground plane. The antenna with outstanding performance is further evaluated to determine its maximum range of communication. Each designs range performance is evaluated using a pair of transceivers to demonstrate round-trip communication. This research is intended to provide a knowledge base which will help decrease the number of design iterations needed for future implementation of products requiring integration of small printed antennas. In the past, several design iterations have been needed to fine tune antenna dimensions and achieve acceptable levels of performance. This process consumes a large amount of time and material resources leading to costly development of transceiver designs. Typically, this occurs because matching components and antenna geometries are almost never correct on the first design. This work hopes to determine the limitations associated with antenna miniaturization and provide well known antenna examples that can be easily used in future work.

  10. Application of Printed Circuit Board Technology to FT-ICR MS Analyzer Cell Construction and Prototyping

    SciTech Connect (OSTI)

    Leach, Franklin E.; Norheim, Randolph V.; Anderson, Gordon A.; Pasa-Tolic, Ljiljana

    2014-12-01

    Although Fourier transform ion cyclotron resonance mass spectrometry (FT-ICRMS) remains themass spectrometry platform that provides the highest levels of performance for mass accuracy and resolving power, there is room for improvement in analyzer cell design as the ideal quadrupolar trapping potential has yet to be generated for a broadband MS experiment. To this end, analyzer cell designs have improved since the field’s inception, yet few research groups participate in this area because of the high cost of instrumentation efforts. As a step towards reducing this barrier to participation and allowing for more designs to be physically tested, we introduce a method of FT-ICR analyzer cell prototyping utilizing printed circuit boards at modest vacuum conditions. This method allows for inexpensive devices to be readily fabricated and tested over short intervals and should open the field to laboratories lacking or unable to access high performance machine shop facilities because of the required financial investment.

  11. Printed circuit board impedance matching step for microwave (millimeter wave) devices

    DOE Patents [OSTI]

    Pao, Hsueh-Yuan; Aguirre, Jerardo; Sargis, Paul

    2013-10-01

    An impedance matching ground plane step, in conjunction with a quarter wave transformer section, in a printed circuit board provides a broadband microwave matching transition from board connectors or other elements that require thin substrates to thick substrate (>quarter wavelength) broadband microwave (millimeter wave) devices. A method of constructing microwave and other high frequency electrical circuits on a substrate of uniform thickness, where the circuit is formed of a plurality of interconnected elements of different impedances that individually require substrates of different thicknesses, by providing a substrate of uniform thickness that is a composite or multilayered substrate; and forming a pattern of intermediate ground planes or impedance matching steps interconnected by vias located under various parts of the circuit where components of different impedances are located so that each part of the circuit has a ground plane substrate thickness that is optimum while the entire circuit is formed on a substrate of uniform thickness.

  12. Method for formation of high quality back contact with screen-printed local back surface field

    DOE Patents [OSTI]

    Rohatgi, Ajeet; Meemongkolkiat, Vichai

    2010-11-30

    A thin silicon solar cell having a back dielectric passivation and rear contact with local back surface field is described. Specifically, the solar cell may be fabricated from a crystalline silicon wafer having a thickness from 50 to 500 micrometers. A barrier layer and a dielectric layer are applied at least to the back surface of the silicon wafer to protect the silicon wafer from deformation when the rear contact is formed. At least one opening is made to the dielectric layer. An aluminum contact that provides a back surface field is formed in the opening and on the dielectric layer. The aluminum contact may be applied by screen printing an aluminum paste having from one to 12 atomic percent silicon and then applying a heat treatment at 750 degrees Celsius.

  13. AMO’s Blake Marshall Joins Industry Leaders for Discussion About 3D Printing and the Environment

    Broader source: Energy.gov [DOE]

    On Thursday, April 14, hundreds of industry leaders, researchers, and “Maker Community” members converged at the Rayburn House Office building for 3D/DC 2016, one of the nation’s preeminent 3D printing policy events. Hosted by The American Society Of Mechanical Engineers (ASME) and Public Knowledge, 3D/DC 2016 featured several panel discussions on topics such as STEAM Education, the Arts, the Environment, Bridging the Workforce Skills Gap, and Social Impact. Blake Marshall, a physical scientist and technology manager for the Advanced Manufacturing Office (AMO), served as a panelist for the 3D Printing and the Environment panel. Blake manages research and development programs that advance the state of the art in additive manufacturing technologies for the AMO. He engaged with a diverse group of participants and highlighted some of AMO’s activities in 3D printing research and development. A major focus of the environment panel was the positive impact that 3D printing could have on the environment and the importance of developing recyclable feedstocks for additive manufacturing to further increase sustainability.

  14. SU-E-T-04: 3D Printed Patient-Specific Surface Mould Applicators for Brachytherapy Treatment of Superficial Lesions

    SciTech Connect (OSTI)

    Cumming, I; Lasso, A; Rankin, A; Fichtinger, G [Laboratory for Percutaneous Surgery, School of Computing, Queen's University, Kingston, Ontario (Canada); Joshi, C P; Falkson, C; Schreiner, L John [CCSEO, Kingston General Hospital and Department of Oncology, Queen's University, Kingston, Ontario (Canada)

    2014-06-01

    Purpose: Evaluate the feasibility of constructing 3D-printed patient-specific surface mould applicators for HDR brachytherapy treatment of superficial lesions. Methods: We propose using computer-aided design software to create 3D printed surface mould applicators for brachytherapy. A mould generation module was developed in the open-source 3D Slicer ( http://www.slicer.org ) medical image analysis platform. The system extracts the skin surface from CT images, and generates smooth catheter paths over the region of interest based on user-defined start and end points at a specified stand-off distance from the skin surface. The catheter paths are radially extended to create catheter channels that are sufficiently wide to ensure smooth insertion of catheters for a safe source travel. An outer mould surface is generated to encompass the channels. The mould is also equipped with fiducial markers to ensure its reproducible placement. A surface mould applicator with eight parallel catheter channels of 4mm diameters was fabricated for the nose region of a head phantom; flexible plastic catheters of 2mm diameter were threaded through these channels maintaining 10mm catheter separations and a 5mm stand-off distance from the skin surface. The apparatus yielded 3mm thickness of mould material between channels and the skin. The mould design was exported as a stereolithography file to a Dimension SST1200es 3D printer and printed using ABS Plus plastic material. Results: The applicator closely matched its design and was found to be sufficiently rigid without deformation during repeated application on the head phantom. Catheters were easily threaded into channels carved along catheter paths. Further tests are required to evaluate feasibility of channel diameters smaller than 4mm. Conclusion: Construction of 3D-printed mould applicators show promise for use in patient specific brachytherapy of superficial lesions. Further evaluation of 3D printing techniques and materials is required for constructing sufficiently thin, rigid and durable surface moulds suitable for clinical deployment.

  15. SU-F-BRE-04: Construction of 3D Printed Patient Specific Phantoms for Dosimetric Verification Measurements

    SciTech Connect (OSTI)

    Ehler, E; Higgins, P; Dusenbery, K

    2014-06-15

    Purpose: To validate a method to create per patient phantoms for dosimetric verification measurements. Methods: Using a RANDO phantom as a substitute for an actual patient, a model of the external features of the head and neck region of the phantom was created. A phantom was used instead of a human for two reasons: to allow for dosimetric measurements that would not be possible in-vivo and to avoid patient privacy issues. Using acrylonitrile butadiene styrene thermoplastic as the building material, a hollow replica was created using the 3D printer filled with a custom tissue equivalent mixture of paraffin wax, magnesium oxide, and calcium carbonate. A traditional parallel-opposed head and neck plan was constructed. Measurements were performed with thermoluminescent dosimeters in both the RANDO phantom and in the 3D printed phantom. Calculated and measured dose was compared at 17 points phantoms including regions in high and low dose regions and at the field edges. On-board cone beam CT was used to localize both phantoms within 1mm and 1 prior to radiation. Results: The maximum difference in calculated dose between phantoms was 1.8% of the planned dose (180 cGy). The mean difference between calculated and measured dose in the anthropomorphic phantom and the 3D printed phantom was 1.9% 2.8% and ?0.1% 4.9%, respectively. The difference between measured and calculated dose was determined in the RANDO and 3D printed phantoms. The differences between measured and calculated dose in each respective phantom was within 2% for 12 of 17 points. The overlap of the RANDO and 3D printed phantom was 0.956 (Jaccard Index). Conclusion: A custom phantom was created using a 3D printer. Dosimetric calculations and measurements showed good agreement between the dose in the RANDO phantom (patient substitute) and the 3D printed phantom.

  16. Formation Mechanism for Printed Silver-Contacts for Silicon Solar Cells

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Fields, Jeremy D.; Ahmad, Md. Imteyaz; Pool, Vanessa L.; Yu, Jiafan; Van Campen, Douglas G.; Parilla, Philip A.; Toney, Michael F.; van Hest, Maikel F. A. M.

    2016-04-01

    Screen-printing provides an economically attractive means for making Ag electrical contacts to Si solar cells, but the use of Ag substantiates a significant manufacturing cost, and the glass frit used in the paste to enable contact formation contains Pb. To achieve optimal electrical performance and to develop pastes with alternative, abundant, and non-toxic materials requires understanding the contact formation process during firing. Here, we use in-situ X-ray diffraction during firing to reveal the reaction sequence. The findings suggest that between 500 degrees C and 650 degrees C PbO in the frit etches the SiNx antireflective-coating on the solar cell, exposingmore » the Si surface. Then, above 650 degrees C, Ag+ dissolves into the molten glass frit -- key for enabling deposition of metallic Ag on the emitter surface and precipitation of Ag nanocrystals within the glass. Ultimately, this work clarifies contact formation mechanisms and suggests approaches for development of inexpensive, nontoxic solar cell contacting pastes.« less

  17. Numerical Study on Crossflow Printed Circuit Heat Exchanger for Advanced Small Modular Reactors

    SciTech Connect (OSTI)

    Yoon, Su-Jong; Sabharwall, Piyush; Kim, Eung-Soo

    2014-03-01

    Various fluids such as water, gases (helium), molten salts (FLiNaK, FLiBe) and liquid metal (sodium) are used as a coolant of advanced small modular reactors (SMRs). The printed circuit heat exchanger (PCHE) has been adopted as the intermediate and/or secondary heat exchanger of SMR systems because this heat exchanger is compact and effective. The size and cost of PCHE can be changed by the coolant type of each SMR. In this study, the crossflow PCHE analysis code for advanced small modular reactor has been developed for the thermal design and cost estimation of the heat exchanger. The analytical solution of single pass, both unmixed fluids crossflow heat exchanger model was employed to calculate a two dimensional temperature profile of a crossflow PCHE. The analytical solution of crossflow heat exchanger was simply implemented by using built in function of the MATLAB program. The effect of fluid property uncertainty on the calculation results was evaluated. In addition, the effect of heat transfer correlations on the calculated temperature profile was analyzed by taking into account possible combinations of primary and secondary coolants in the SMR systems. Size and cost of heat exchanger were evaluated for the given temperature requirement of each SMR.

  18. SciThur AM: YIS - 07: Design and production of 3D printed bolus for electron radiation therapy

    SciTech Connect (OSTI)

    Su, Shiqin; Moran, Kathryn; Robar, James L.

    2014-08-15

    This is a proof-of-concept study demonstrating the capacity for modulated electron radiation therapy (MERT) using 3D printed bolus. Previous reports have involved bolus design using an electron pencil beam model and fabrication using a milling machine. In this study, an in-house algorithm is presented that optimizes the dose distribution with regard to dose coverage, conformity and homogeneity within planning target volume (PTV). The algorithm uses calculated result of a commercial electron Monte Carlo dose calculation as input. Distances along ray lines from distal side of 90% isodose to distal surface of PTV are used to estimate the bolus thickness. Inhomogeneities within the calculation volume are accounted for using coefficient of equivalent thickness method. Several regional modulation operators are applied to improve dose coverage and uniformity. The process is iterated (usually twice) until an acceptable MERT plan is realized, and the final bolus is printed using solid polylactic acid. The method is evaluated with regular geometric phantoms, anthropomorphic phantoms and a clinical rhabdomyosarcoma pediatric case. In all cases the dose conformity is improved compared to that with uniform bolus. The printed boluses conform well to the surface of complex anthropomorphic phantoms. For the rhabdomyosarcoma patient, the MERT plan yields a reduction of mean dose by 38.2% in left kidney relative to uniform bolus. MERT using 3D printed bolus appears to be a practical, low cost approach to generating optimized bolus for electron therapy. The method is effective in improving conformity of prescription isodose surface and in sparing immediately adjacent normal tissues.

  19. Leaching behavior of copper from waste printed circuit boards with Brnsted acidic ionic liquid

    SciTech Connect (OSTI)

    Huang, Jinxiu; Chen, Mengjun Chen, Haiyan; Chen, Shu; Sun, Quan

    2014-02-15

    Highlights: A Brnsted acidic ILs was used to leach Cu from WPCBs for the first time. The particle size of WPCBs has significant influence on Cu leaching rate. Cu leaching rate was higher than 99% under the optimum leaching conditions. The leaching process can be modeled with shrinking core model, and the E{sub a} was 25.36 kJ/mol. - Abstract: In this work, a Brnsted acidic ionic liquid, 1-butyl-3-methyl-imidazolium hydrogen sulfate ([bmim]HSO{sub 4}), was used to leach copper from waste printed circuit boards (WPCBs, mounted with electronic components) for the first time, and the leaching behavior of copper was discussed in detail. The results showed that after the pre-treatment, the metal distributions were different with the particle size: Cu, Zn and Al increased with the increasing particle size; while Ni, Sn and Pb were in the contrary. And the particle size has significant influence on copper leaching rate. Copper leaching rate was higher than 99%, almost 100%, when 1 g WPCBs powder was leached under the optimum conditions: particle size of 0.10.25 mm, 25 mL 80% (v/v) ionic liquid, 10 mL 30% hydrogen peroxide, solid/liquid ratio of 1/25, 70 C and 2 h. Copper leaching by [bmim]HSO{sub 4} can be modeled with the shrinking core model, controlled by diffusion through a solid product layer, and the kinetic apparent activation energy has been calculated to be 25.36 kJ/mol.

  20. High-Performance Organic Field-Effect Transistors with Dielectric and Active Layers Printed Sequentially by Ultrasonic Spraying

    SciTech Connect (OSTI)

    Shao, Ming [ORNL; Sanjib, Das [University of Tennessee, Knoxville (UTK); Chen, Jihua [ORNL; Keum, Jong Kahk [ORNL; Ivanov, Ilia N [ORNL; Gu, Gong [University of Tennessee, Knoxville (UTK); Geohegan, David B [ORNL; Xiao, Kai [ORNL

    2013-01-01

    High-performance, flexible organic field-effect transistors (OFETs) are reported with PVP dielectric and TIPS-PEN active layers sequentially deposited by ultrasonic spray-coating on plastic substrate. OFETs fabricated in ambient air with a bottom-gate/top-contact geometry are shown to achieve on/off ratios of >104 and mobilities as high as 0.35 cm2/Vs. These rival the characteristics of the best solution-processible small molecule FETs fabricated by other fabrication methods such as drop casting and ink-jet printing.

  1. Low thermal budget photonic processing of highly conductive Cu interconnects based on CuO nanoinks. Potential for flexible printed electronics

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Rager, Matthew S.; Aytug, Tolga; Veith, Gabriel M.; Joshi, Pooran C.

    2015-12-31

    The developing field of printed electronics nanoparticle based inks such as CuO show great promise as a low-cost alternative to other metal-based counterparts (e.g., silver). In particular, CuO inks significantly eliminate the issue of particle oxidation, before and during the sintering process, that is prevalent in Cu-based formulations. We report here the scalable and low-thermal budget photonic fabrication of Cu interconnects employing a roll-to-roll compatible pulse-thermal-processing (PTP) technique that enables phase reduction and subsequent sintering of inkjet-printed CuO patterns onto flexible polymer templates. Detailed investigations of curing and sintering conditions were performed to understand the impact of PTP system conditionsmore » on the electrical performance of the Cu patterns. Specifically, the impact of energy and power of photonic pulses on print conductivity was systematically studied by varying the following key processing parameters: pulse intensity, duration and sequence. Through optimization of such parameters, highly conductive prints in < 1 s with resistivity values as low as 100 n m has been achieved. We also observed that the introduction of an initial ink-drying step in ambient atmosphere, after the printing and before sintering, leads to significant improvements in mechanical integrity and electrical performance of the printed Cu patterns. Moreover, the viability of CuO reactive inks, coupled with the PTP technology and pre ink-drying protocols, has also been demonstrated for the additive integration of a low-cost Cu temperature sensor onto a flexible polymer substrate.« less

  2. Low thermal budget photonic processing of highly conductive Cu interconnects based on CuO nanoinks. Potential for flexible printed electronics

    SciTech Connect (OSTI)

    Rager, Matthew S.; Aytug, Tolga; Veith, Gabriel M.; Joshi, Pooran C.

    2015-12-31

    The developing field of printed electronics nanoparticle based inks such as CuO show great promise as a low-cost alternative to other metal-based counterparts (e.g., silver). In particular, CuO inks significantly eliminate the issue of particle oxidation, before and during the sintering process, that is prevalent in Cu-based formulations. We report here the scalable and low-thermal budget photonic fabrication of Cu interconnects employing a roll-to-roll compatible pulse-thermal-processing (PTP) technique that enables phase reduction and subsequent sintering of inkjet-printed CuO patterns onto flexible polymer templates. Detailed investigations of curing and sintering conditions were performed to understand the impact of PTP system conditions on the electrical performance of the Cu patterns. Specifically, the impact of energy and power of photonic pulses on print conductivity was systematically studied by varying the following key processing parameters: pulse intensity, duration and sequence. Through optimization of such parameters, highly conductive prints in < 1 s with resistivity values as low as 100 n m has been achieved. We also observed that the introduction of an initial ink-drying step in ambient atmosphere, after the printing and before sintering, leads to significant improvements in mechanical integrity and electrical performance of the printed Cu patterns. Moreover, the viability of CuO reactive inks, coupled with the PTP technology and pre ink-drying protocols, has also been demonstrated for the additive integration of a low-cost Cu temperature sensor onto a flexible polymer substrate.

  3. WE-F-16A-01: Commissioning and Clinical Use of PC-ISO for Customized, 3D Printed, Gynecological Brachytherapy Applicators

    SciTech Connect (OSTI)

    Cunha, J; Sethi, R; Mellis, K; Siauw, T; Sudhyadhom, A; Hsu, I; Pouliot, J

    2014-06-15

    Purpose: (1) Evaluate the safety and radiation attenuation properties of PCISO, a bio-compatible, sterilizable 3D printing material by Stratasys, (2) establish a method for commissioning customized multi- and single-use 3D printed applicators, (3) report on use of customized vaginal cylinders used to treat a series of serous endometrial cancer patient. Methods: A custom film dosimetry apparatus was designed to hold a Gafchromic radio film segment between two blocks of PC-ISO and 3D-printed using a Fortus 400mc (StrataSys). A dose plan was computed using 13 dwell positions at 2.5 mm spacing and normalized to 1500 cGy at 1 cm. Film exposure was compared to control tests in only air and only water. The average Hounsfield Unit (HU) was computed and used to verify water equivalency. For the clinical use cases, the physician specifies the dimensions and geometry of a custom applicator from which a CAD model is designed and printed. Results: The doses measured from the PC-ISO Gafchromic film test were within 1% of the dose measured in only water between 1cm and 6cm from the channel. Doses increased 74% measured in only air. HU range was 1143. The applicators were sterilized using the Sterrad system multiple times without damage. As of submission 3 unique cylinders have been designed, printed, and used in the clinic. A standardizable workflow for commissioning custom 3D printed applicators was codified and will be reported. Conclusions: Quality assurance (QA) evaluation of the PC-ISO 3D-printing material showed that PC-ISO is a suitable material for a gynecological brachytherapy vaginal cylinder in a clinical setting. With the material commissioning completed, if the physician determines that a better treatment would Result, a customized design is fabricated with limited additional QA necessary. Although this study was specific to PC-ISO, the same setup can be used to evaluate other 3D-printing materials.

  4. Tailored benzoxazines as novel resin systems for printed circuit boards in high temperature e-mobility applications

    SciTech Connect (OSTI)

    Troeger, K. Darka, R. Khanpour Neumeyer, T. Altstaedt, V.

    2014-05-15

    This study focuses on the development of Bisphenol-F-benzoxazine resins blended with different ratios of a trifunctional epoxy resin suitable as matrix for substrates for high temperature printed circuit board (HT-PCB) applications. With the benzoxazine blends glass transition temperatures of more than 190 °C could be achieved in combination with a coefficient of thermal expansion in thickness direction (z-CTE) of less than 60 ppm/K without adding any fillers. This shows the high potential of the benzoxazine-epoxy blend systems as substrate materials for HT-PCBs. To understand the thermal behavior of the different formulations, the apparent crosslink density was calculated based on data from Dynamic Mechanical Analysis. Laminates in laboratory scale were prepared and characterized to demonstrate the transformation of the neat resin properties into real electronic substrate properties. The produced laminates exhibit a z-CTE below 40 ppm/K.

  5. Modeling a Printed Circuit Heat Exchanger with RELAP5-3D for the Next Generation Nuclear Plant

    SciTech Connect (OSTI)

    Not Available

    2010-12-01

    The main purpose of this report is to design a printed circuit heat exchanger (PCHE) for the Next Generation Nuclear Plant and carry out Loss of Coolant Accident (LOCA) simulation using RELAP5-3D. Helium was chosen as the coolant in the primary and secondary sides of the heat exchanger. The design of PCHE is critical for the LOCA simulations. For purposes of simplicity, a straight channel configuration was assumed. A parallel intermediate heat exchanger configuration was assumed for the RELAP5 model design. The RELAP5 modeling also required the semicircular channels in the heat exchanger to be mapped to rectangular channels. The initial RELAP5 run outputs steady state conditions which were then compared to the heat exchanger performance theory to ensure accurate design is being simulated. An exponential loss of pressure transient was simulated. This LOCA describes a loss of coolant pressure in the primary side over a 20 second time period. The results for the simulation indicate that heat is initially transferred from the primary loop to the secondary loop, but after the loss of pressure occurs, heat transfers from the secondary loop to the primary loop.

  6. Tri Party Agreement Administrative Record Presentation for Dennis A. Faulk, EPA Jane A. Hedges, Ecology

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    TPA) and Milestone Tutorial John Price, Ecology What is it? Hanford Federal Facility Agreement and Consent Order (HFFACO) * Legal Agreement, Parts One - Five - Federal Facility Agreement between US Department of Energy and US Environmental Protection Agency (US DOE and US EPA) - Consent Order between US DOE and Washington Department of Ecology - A 3-party agreement [TPA] on how to integrate the Federal Facility Agreement with the Consent Order Why is there an EPA-DOE Federal Facility Agreement?

  7. Dr Jane Zhu | U.S. DOE Office of Science (SC)

    Office of Science (SC) Website

    appointments at the National Renewable Energy Laboratory and Oak Ridge National Laboratory before joining the faculty of the Physics Department at New Mexico State University. ...

  8. Full page fax print

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Other major miscellaneous inputs Internal to the Tank Farm ... Salt crystallized from high-heat waste and low-heat waste is ... The rotary kiln primary combustion chamber will be used ...

  9. Full page fax print

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 (U) April 26, 1995 Westinghouse Savannah River Company Savannah River S~e Aiken, SC 29808 HLW-OVP-95-0031 @ Westinghouse Savannah River Company. April 27, 1995 A. B. Scoa, Jr. Va Preoident and General...,. Hgh Level Was .. ManagamenI DiviIion P. O. Box 61' Allen, SC 29602 HLW-OVP-95-0031 Keywords: Retention: High Level W88te SyslemPIan Production Plan 25 years, offer to NARA at end of retention. Disposal Auth: DOEF 1324.5 95-0002 Track .: 7605 File Record: 773-52A, Records Mr. Steven D.

  10. JLabbrochure_outsidePRINT

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    N A T U R E O F M A T T E R E X P L O R I N G THOMAS JEFFERSON NATIONAL ACCELERATOR FACILITY WANT TO KNOW MORE? Thomas Je erson National Accelerator Facility is managed by Je erson Science Associates, LLC for the U.S. Department of Energy's O ce of Science Learn more about Je erson Lab by visiting www.jlab.org, by sending an e-mail to jlabinfo@jlab.org or by calling (757) 269-7100. ABOUT JEFFERSON LAB Je erson Lab's primary mission is to study the atomic nucleus, but it also carries out applied

  11. Federal Sustainable Print Management

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2015-11-17

    The Guide provides acceptable approaches for implementing the IT sustainability requirements and criteria required by DOE Order 436.1, Departmental Sustainability, dated 5-2-11, and related to the sustainability requirements contained in Executive Order 13693, "Planning for Federal Sustainability in the Next Decade." Does not cancel/supersede other directives.

  12. Federal Sustainable Print Management

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2015-07-07

    This Guide provides acceptable approaches for implementing the IT sustainability requirements and criteria required by DOE Order 436.1, Departmental Sustainability, dated 5-2-11 and related to the sustainability requirements contained in Executive Order 13693, "Planning for Federal Sustainability in the Next Decade.

  13. Full page fax print

    National Nuclear Security Administration (NNSA)

  14. Full page fax print

    National Nuclear Security Administration (NNSA)

  15. Printed on Recycled Paper

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Dennis Hurtt U.S. DOE Carlsbad Field Office (505) 234-7327 Susan Scott Washington TRU Solutions (505) 234-7204 (800) 493-9768 http://www.wipp.carlsbad.nm.us U.S. Department of Energy Carlsbad Field Office Waste Isolation Pilot Plant P.O. Box 3090 Carlsbad, New Mexico 88221 DOENews For Immediate Release 50,000 Containers Safely Disposed at WIPP CARLSBAD, N.M., December 18, 2003 - The U.S. Department of Energy's (DOE) Waste Isolation Pilot Plant (WIPP) safely disposed its 50,000 th container of

  16. Full page fax print

    Office of Legacy Management (LM)

  17. Printed on Recycled Paper

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    our national clean-up strategy." The shipment from Idaho consisted of three 30-gallon drums of radioactive debris waste that resulted from research activities and testing of...

  18. FELbrochure_outsidePRINT

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    FREE-ELECTRON THOMAS JEFFERSON NATIONAL ACCELER ATOR FACILIT Y L A S E R WANT TO KNOW MORE? Thomas Je erson National Accelerator Facility is managed by Je erson Science Associates, LLC for the U.S. Department of Energy's O ce of Science Learn more about Je erson Lab by visiting www.jlab.org, by sending an e-mail to jlabinfo@jlab.org or by calling (757) 269-7100. HOW LASERS WORK Lasers are all around us. There are lasers in your CD player and the CD-ROM in your computer. More powerful lasers can

  19. SRFbrochure_outsidePRINT

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    R E Q U E N C Y T E C H N O L O G Y SUPERCONDUCTINGRADIO THOMAS JEFFERSON NATIONAL ACCELERATOR FACILITY WANT TO KNOW MORE? Thomas Je erson National Accelerator Facility is managed by Je erson Science Associates, LLC for the U.S. Department of Energy's O ce of Science For more information, visit Je erson Lab's SRF Institute webpage at http://srf.jlab.org/ ABOUT JEFFERSON LAB Thomas Je erson National Accelerator Facility is a world- leading nuclear physics research laboratory. Funded by the U.S.

  20. Full page photo print

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    214(2013) July 2015 State Energy Consumption Estimates 1960 Through 2013 2013 Consumption Summary Tables S U M M A R I E S U.S. Energy Information Administration | State Energy Data 2013: Consumption 3 Table C1. Energy Consumption Overview: Estimates by Energy Source and End-Use Sector, 2013 (Trillion Btu) State Total Energy b Sources End-Use Sectors a Fossil Fuels Nuclear Electric Power Renewable Energy e Net Interstate Flow of Electricity f Net Electricity Imports g Residential Commercial

  1. Printed on Recycled Paper

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (800) 493-9768 http:www.wipp.ws U.S. Department of Energy Carlsbad Field Office Waste Isolation Pilot Plant P.O. Box 3090 Carlsbad, New Mexico 88221 DOENews For Immediate...

  2. Full page fax print

    Office of Scientific and Technical Information (OSTI)

    )lIJfjlHfllmj)mmllillruJt ((I(m(ti.JmlmmmlllWI ll .. . I*mw lffi )( HI I) SOVELEV RECELEV 40 40 Immlll1 illllmJil11)Immm lfm lli m l.lmillm(mj...

  3. Thermal hydraulic performance testing of printed circuit heat exchangers in a high-temperature helium test facility

    SciTech Connect (OSTI)

    Sai K. Mylavarapu; Xiaodong Sun; Richard E. Glosup; Richard N. Christensen; Michael W. Patterson

    2014-04-01

    In high-temperature gas-cooled reactors, such as a very high temperature reactor (VHTR), an intermediate heat exchanger (IHX) is required to efficiently transfer the core thermal output to a secondary fluid for electricity generation with an indirect power cycle and/or process heat applications. Currently, there is no proven high-temperature (750800 C or higher) compact heat exchanger technology for high-temperature reactor design concepts. In this study, printed circuit heat exchanger (PCHE), a potential IHX concept for high-temperature applications, has been investigated for their heat transfer and pressure drop characteristics under high operating temperatures and pressures. Two PCHEs, each having 10 hot and 10 cold plates with 12 channels (semicircular cross-section) in each plate are fabricated using Alloy 617 plates and tested for their performance in a high-temperature helium test facility (HTHF). The PCHE inlet temperature and pressure were varied from 85 to 390 C/1.02.7 MPa for the cold side and 208790 C/1.02.7 MPa for the hot side, respectively, while the mass flow rate of helium was varied from 15 to 49 kg/h. This range of mass flow rates corresponds to PCHE channel Reynolds numbers of 950 to 4100 for the cold side and 900 to 3900 for the hot side (corresponding to the laminar and laminar-to-turbulent transition flow regimes). The obtained experimental data have been analyzed for the pressure drop and heat transfer characteristics of the heat transfer surface of the PCHEs and compared with the available models and correlations in the literature. In addition, a numerical treatment of hydrodynamically developing and hydrodynamically fully-developed laminar flow through a semicircular duct is presented. Relations developed for determining the hydrodynamic entrance length in a semicircular duct and the friction factor (or pressure drop) in the hydrodynamic entry length region for laminar flow through a semicircular duct are given. Various hydrodynamic entrance region parameters, such as incremental pressure drop number, apparent Fanning friction factor, and hydrodynamic entrance length in a semicircular duct have been numerically estimated.

  4. probesandstyle.dvi

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4-3994 Unlimited Release Printed September 2004 Capacitance and Effective Area of Flush Monopole Probes Larry K. Warne, Lorena I. Basilio, William A. Johnson, Marvin E. Morris Electromagnetics and Plasma Physics Analysis Dept. Matthew B. Higgins Applied Accelerator and Electromagnetic Technology Dept. Jane M. Lehr Advanced Pulsed Power Technologies Dept. Sandia National Laboratories P. O. Box 5800 Albuquerque, NM 87185-1152 Abstract Approximate formulas are constructed and numerical simulations

  5. Direct transparent electrode patterning on layered GaN substrate by screen printing of indium tin oxide nanoparticle ink for Eu-doped GaN red light-emitting diode

    SciTech Connect (OSTI)

    Kashiwagi, Y. Yamamoto, M.; Saitoh, M.; Takahashi, M.; Ohno, T.; Nakamoto, M.; Koizumi, A.; Fujiwara, Y.; Takemura, Y.; Murahashi, K.; Ohtsuka, K.; Furuta, S.

    2014-12-01

    Transparent electrodes were formed on Eu-doped GaN-based red-light-emitting diode (GaN:Eu LED) substrates by the screen printing of indium tin oxide nanoparticle (ITO np) inks as a wet process. The ITO nps with a mean diameter of 25?nm were synthesized by the controlled thermolysis of a mixture of indium complexes and tin complexes. After the direct screen printing of ITO np inks on GaN:Eu LED substrates and sintering at 850?C for 10?min under atmospheric conditions, the resistivity of the ITO film was 5.2?m??cm. The fabricated LED up to 3?mm square surface emitted red light when the on-voltage was exceeded.

  6. Eco-friendly copper recovery process from waste printed circuit boards using Fe{sup 3+}/Fe{sup 2+} redox system

    SciTech Connect (OSTI)

    Fogarasi, Szabolcs; Imre-Lucaci, Florica; Egedy, Attila; Imre-Lucaci, Árpád; Ilea, Petru

    2015-06-15

    Highlights: • We developed an ecofriendly mediated electrochemical process for copper recovery. • The recovery of copper was achieved without mechanical pretreatment of the samples. • We identified the optimal flow rate for the leaching and electrowinning of copper. • The copper content of the obtained cathodic deposits was over 99.9%. - Abstract: The present study aimed at developing an original and environmentally friendly process for the recovery of copper from waste printed circuit boards (WPCBs) by chemical dissolution with Fe{sup 3+} combined with the simultaneous electrowinning of copper and oxidant regeneration. The recovery of copper was achieved in an original set-up consisting of a three chamber electrochemical reactor (ER) connected in series with a chemical reactor (CR) equipped with a perforated rotating drum. Several experiments were performed in order to identify the optimal flow rate for the dissolution of copper in the CR and to ensure the lowest energy consumption for copper electrodeposition in the ER. The optimal hydrodynamic conditions were provided at 400 mL/min, leading to the 75% dissolution of metals and to a low specific energy consumption of 1.59 kW h/kg Cu for the electrodeposition process. In most experiments, the copper content of the obtained cathodic deposits was over 99.9%.

  7. NucImaging_outsidePRINT

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

  8. E-Print Network Search

    Office of Scientific and Technical Information (OSTI)

    of Science Office of Scientific and Technical Information Website PoliciesImportant Links National Library of Energy BETA science.gov WorldWideScience.org Deep Web Technologies

  9. SciEdbrochure_outsidePRINT

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NATIONAL ACCELERATOR FACILITY Thomas Je erson National Accelerator Facility (Je erson Lab) is managed by Je erson Science Associates, LLC for the U.S. Department of Energy's O ce of Science WANT TO KNOW MORE? Contact Information: Thomas Je erson National Accelerator Facility O ce of Science Education 628 Hofstadter Road, Suite 6 Newport News, VA 23606 phone: (757) 269-7567 fax: (757) 269-5065 e-mail: tyler@jlab.org ABOUT JEFFERSON LAB Je erson Lab is a U.S. Department of Energy nuclear physics

  10. SciEdbrochure_outsidePRINT

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    math and technology education. Je erson Lab's long-term commit- ment to science education is focused on: *Increasing the number of teachers with a substantial background in math ...

  11. 22750_timeline_FOR_PRINT

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... 2005: ESnet becomes a key partner in DICE ... a production IPv6 management system across its entire ... records and managing cryptographic keys, beating a ...

  12. CP2K

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    COP 21 Shelby Cobra COP 21 Shelby Cobra Addthis 1 of 12 U.S. Secretary of Agriculture Tom Vilsack visits the Shelby Cobra at the COP 21 conference in Paris. Image: Photo courtesy U.S. Department of Energy 2 of 12 U.S. Ambassador to France and Monaco Jane Hartley discusses 3D printing technology and advanced manufacturing with Rob Ivester from EERE's Advanced Manufacturing Office Image: Photo courtesy U.S. Department of Energy 3 of 12 French Minister of Foreign Affairs and International

  13. COP 21 Shelby Cobra | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    COP 21 Shelby Cobra COP 21 Shelby Cobra Addthis 1 of 12 U.S. Secretary of Agriculture Tom Vilsack visits the Shelby Cobra at the COP 21 conference in Paris. Image: Photo courtesy U.S. Department of Energy 2 of 12 U.S. Ambassador to France and Monaco Jane Hartley discusses 3D printing technology and advanced manufacturing with Rob Ivester from EERE's Advanced Manufacturing Office Image: Photo courtesy U.S. Department of Energy 3 of 12 French Minister of Foreign Affairs and International

  14. Search for: All records | Data Explorer

    Office of Scientific and Technical Information (OSTI)

    ARM: Rain gauge Mary Jane Bartholomew Rain gauge View Dataset March 2006 ARM: Video Disdrometer Drop Size Distribution Mary Jane Bartholomew Video Disdrometer Drop Size ...

  15. W7 printing from VISITOR network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2. Click on "Add a printer" and choose "Add a local printer". 3 . Choose "create a new port" and pick "Standard TCPIP Port" from the drop down menu. 4. Type the following for the...

  16. Transforum Volume 12 Issue 2, Print Version

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Quality Assessment of Pesticide Usage for Biofuel Production," David Lampert, 2012 ARPA-E Energy Innovation Summit, February 26-27, 2012. "Implications of Biofuel Water Footprint...

  17. NSS-12-FINAL-PRINT.indd

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NSS Statement on Signing of the Administrative Arrangement to the Agreement for Cooperation between the United States and Republic of Korea Concerning Peaceful Uses of Nuclear Energy (WASHINGTON, D.C.)-Today, Administrator Frank Klotz of the U.S. Department of Energy's National Nuclear Security Administration and Chairman Un Chul Lee of the Republic of Korea's (ROK) Nuclear Safety and Security Commission reached agreement on the terms of the Administrative Arrangement to the... NNSA keeps the

  18. Printing and Mail Managers Exchange Forum Teleconference

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    May 16, 2013 Mail discussion Joe Whitford opened the meeting by introducing Al Majors to talk about mail related items. 1) Update on the USPS mail name changes. If approved by the Postal Regulatory Commission the following name changes will go into effective July 28, 2013: a. Express Mail will be called Priority Mail Express b. Express Mail International will be Priority Mail International c. Express Mail Corporate Account will become USPS Express Corporate Account Only the names of these

  19. Printing and Mail Managers Exchange Forum Teleconference

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    November 21, 2013 Mail Managers discussion Joe Whitford opened the meeting by introducing Tony Nellums to talk about mail related items. 1) Mr. Nellums introduced Derek Milner, Policy Advisor from the GSA Office of Government-wide policy. a. Mr. Milner stated that he is being replaced as primary policy contact by Linda Willoughby (Linda.Willoughby@gsa.gov) or (202) 219-1083. b. Initiatives discussed by Mr. Milner included: Upcoming mail reports. The SMART system is online and available now.

  20. NewRegulatoryModels-Print.pdf

    Office of Environmental Management (EM)

    &24;' 5DWH PHFKDQLVPV WKDW PD OLPLW WKH LPSDFW RI GLVWULEXWHG UHVRXUFHV RQ XWLOLW HDUQLQJV LQ :HVWHUQ VWDWHV...

  1. 3D Printed Toy | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Scientists at GE Global Research get into the holiday spirit by bringing high-tech additive manufacturing techniques to Christmas tree ornaments. You Might Also Like...

  2. 12GeVbrochure_outsidePRINT

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

  3. 2011-04-salishan-print.pptx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    G amblin and Timo Bremer * Collaboration with SCI@Utah (Valerio Pascucci and Joshua Levine) * Bridge between Performance & VisualizationAnalysis Only one piece of the...

  4. Secure Transportation_final_print-ready

    Office of Environmental Management (EM)

    Department of Energy Section 3161 Rehiring Preference for Eligible Separated Employees Section 3161 Rehiring Preference for Eligible Separated Employees PDF icon Attachment 4 - Section 3161 Rehiring Preference for Eligible Separated Employees More Documents & Publications Involuntary Separation Plan Template General Workforce Restructuring Plan Template Workforce Restructuring Policy

    Offshore Drilling » Section 999 Program Library Section 999 Program Library Cost-Shared Program

  5. Print A018.tif (6 pages)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A018 A018 A018 A018 A018 A018

  6. Print A019.tif (5 pages)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

  7. Print hab advice 144.tif (2 pages)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

  8. Print hab advice 146.tif (4 pages)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

  9. D0208002Rev1print.pdf

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Fact Sheet Public Comment U.S. Department of Energy - Washington State Department of Ecology - U.S. Environmental Pr otection Agency 300 Are a 10 0- B,C 1 00- KW & KE 1 00- N 1 00-...

  10. Timeline Print | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    ... John Herrington Sworn in as Secretary of Energy April 26, 1986 Chernobyl, Ukraine Chernobyl Nuclear Accident Chernobyl Nuclear Accident September 01, 1986 Vienna, Austria Sec. ...

  11. CEUSP_timeline_final_print-ready

    Office of Environmental Management (EM)

    Early 1960's The Atomic Energy Commission sponsored a test irradiation of the reactor fuel at the Consolidated Edison Indian Point-1 Reactor in Buchanan, New York. 1960 1970 1980 1990 2000 2010 December 1968 - January 1969 Purified uranium was extracted at West Valley Demonstration Project (WVDP) from this fuel. The uranium was chemically separated from the transuranics, fission products, and other constituents common in reactor fuel. 1969 - 1985 The material was stored in a single tank in

  12. Public Law 102-392 for Printing

    Energy Savers [EERE]

    Promoting NEPA Transparency and Public Engagement Promoting NEPA Transparency and Public Engagement June 3, 2011 - 1:14pm Addthis "NEPA is, at its core, a transparency statute," said Katie Scharf, Council on Environmental Quality (CEQ) Deputy General Counsel, in opening a panel discussion on using information technology to support open government initiatives, engage the public, and add value to NEPA analysis. At the March 9, 2011, event - hosted by CEQ for Federal NEPA and legal staff

  13. Aluminum plasmonic metamaterials for structural color printing...

    Office of Scientific and Technical Information (OSTI)

    Number: AC02-06CH11357; NSF CBET-1402743 Type: Accepted Manuscript Journal Name: Optics Express Additional Journal Information: Journal Volume: 23; Journal Issue: 11; Journal...

  14. Printing and Mail Managers Exchange Forum Teleconference

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    New reporting due date will be October 31 of each year starting in FY-2014. On-line ... Change to Schedule 5-1. Requirement is to now enter numbers rounded to the nearest dollar ...

  15. Federal Sustainable Print Management (Informational Purposes Only)

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2014-09-21

    This draft has been scheduled for final review before the Directives Review Board on 10-1-15. All major comments and concerns should be provided to your DRB representative, following your organization process. If you do not know who your representative is, please see the list of DRB members at https://www.directives.doe.gov/beta/references/directives-review-board. If your office is represented by Ingrid Kolb, Director, Office of Management, please submit your major concerns and comments to the DRB Liaison, Camille Beben (Camille.Beben@hq.doe.gov; 202-586-4014). All major comments and concerns should be submitted by COB 9-29-15.

  16. E-print Network : User Account

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of Science Office of Scientific and Technical Information Website PoliciesImportant Links National Library of Energy BETA science.gov WorldWideScience.org Deep Web Technologies...

  17. E-print Network : User Login

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Important Links National Library of Energy BETA science.gov WorldWideScience.org Deep Web Technologies Session Preferences These preferences only apply to the current session in...

  18. E-print Network : Your Selections

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Important Links National Library of Energy BETA science.gov WorldWideScience.org Deep Web Technologies Email Results Use this form to email your search results * Email this to:...

  19. Federal Sustainable Print Management - DOE Directives, Delegations...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    No DNFSB: No Related History Exemptions Standards Related to: DOE O 436.1, Departmental Sustainability There are no exemptions listed for this document. There are no Technical...

  20. Search for: All records | DOE Patents

    Office of Scientific and Technical Information (OSTI)

    Bearinger, Jane P. (4) Bearinger, Jane P (2) Dugan, Lawrence C. (2) Wilson, Thomas S (2) Wilson, Thomas S. (2) Benett, William J. (1) Hearon, Michael Keith (1) Jensen, Wayne A. (1) ...

  1. More Than Just a Job

    Broader source: Energy.gov [DOE]

    Jane Johnston came to Argonne National Laboratory for a job funded through the Recovery Act, and found supportive colleagues.

  2. Browse by Discipline -- E-print Network Subject Pathways: Computer...

    Office of Scientific and Technical Information (OSTI)

    Xicotncatl Merino, Miguel A. (Miguel A. Xicotncatl Merino) - Departamento de Matemticas, CINVESTAV del Instituto Politcnico Nacional Xie, Dexuan (Dexuan Xie) - ...

  3. Making 3D Printed Christmas Ornaments | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    high-tech manufacturing to Christmas tree decorations to ring in the holiday season using additive manufacturing techniques. An error occurred. Try watching this video on...

  4. Transfer Printed Microcells with Micro-Optic Concentrators for...

    Office of Scientific and Technical Information (OSTI)

    Micro-Optic Concentrators for Low Cost, High Performance Photovoltaic Modules Authors: Lewis, Jennifer A ; Nuzzo, Ralph G ; Rogers, John A Publication Date: 2011-04-30 OSTI...

  5. Browse by Discipline -- E-print Network Subject Pathways: Plasma...

    Office of Scientific and Technical Information (OSTI)

    P Q R S T U V W X Y Z Ojovan, Michael (Michael Ojovan) - Department of Engineering Materials, University of Southampton Owens, Phillip R. (Phillip R. Owens) - Department of ...

  6. Browse by Discipline -- E-print Network Subject Pathways: Plasma...

    Office of Scientific and Technical Information (OSTI)

    S T U V W X Y Z Rajakaruna, Nishanta (Nishanta Rajakaruna) - College of the Atlantic Go back to Individual Researchers Collections: A B C D E F G H I J K L M N O P Q R S T U V W X ...

  7. Browse by Discipline -- E-print Network Subject Pathways: Plasma...

    Office of Scientific and Technical Information (OSTI)

    Z Young, Hillary S. (Hillary S. Young) - Department of Ecology, Evolution and Marine Biology, University of California Santa Barbara Go back to Individual Researchers Collections: ...

  8. Browse by Discipline -- E-print Network Subject Pathways: Plasma...

    Office of Scientific and Technical Information (OSTI)

    U V W X Y Z Tiquia-Arashiro, Sonia M. (Sonia M. Tiquia-Arashiro) - Department of Natural Sciences, University of Michigan-Dearborn Go back to Individual Researchers Collections: A ...

  9. Browse by Discipline -- E-print Network Subject Pathways: Plasma...

    Office of Scientific and Technical Information (OSTI)

    V W X Y Z Go back to Individual Researchers Collections: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z U.S. Geological Survey, National Water-Quality Assessment Program, ...

  10. Browse by Discipline -- E-print Network Subject Pathways: Plasma...

    Office of Scientific and Technical Information (OSTI)

    F G H I J K L M N O P Q R S T U V W X Y Z Elimelech, Menachem (Menachem Elimelech) - Department of Chemical and Environmental Engineering, Yale University Go back to Individual ...

  11. Browse by Discipline -- E-print Network Subject Pathways: Plasma...

    Office of Scientific and Technical Information (OSTI)

    W X Y Z Vokal, Barbara (Barbara Vokal) - Department of Environmental Sciences, Jozef Stefan Institute Voordouw, Gerrit (Gerrit Voordouw) - Department of Biological Sciences, ...

  12. Browse by Discipline -- E-print Network Subject Pathways: Plasma...

    Office of Scientific and Technical Information (OSTI)

    I J K L M N O P Q R S T U V W X Y Z Jacobs, Jennifer (Jennifer Jacobs) - Civil Engineering Department, University of New Hampshire Jardim, Wilson de Figueiredo (Wilson de ...

  13. Browse by Discipline -- E-print Network Subject Pathways: Environmenta...

    Office of Scientific and Technical Information (OSTI)

    Alvarez, Pedro J. (Pedro J. Alvarez) - Department of Civil and Environmental Engineering, Rice University Alvarez-Cohen, Lisa (Lisa Alvarez-Cohen) - Department of Civil and ...

  14. Browse by Discipline -- E-print Network Subject Pathways: Biotechnolog...

    Office of Scientific and Technical Information (OSTI)

    - Department of Geology, Utah State University Jay, David (David Jay) - Department of Civil Engineering and Environmental Sciences, Portland State University Jayne, Steven (Steven ...

  15. Browse by Discipline -- E-print Network Subject Pathways: Environmenta...

    Office of Scientific and Technical Information (OSTI)

    Jacobson, Arne (Arne Jacobson) - Department of Environmental Resources Engineering, Humboldt State University Jacobson, Mark (Mark Jacobson) - Department of Civil and Environmental ...

  16. Browse by Discipline -- E-print Network Subject Pathways: Biotechnolog...

    Office of Scientific and Technical Information (OSTI)

    A. (Kristen A. Davis) - Department of Civil and Environmental Engineering, University ... (Russell Detwiler) - Department of Civil and Environmental Engineering, University ...

  17. Browse by Discipline -- E-print Network Subject Pathways: Plasma...

    Office of Scientific and Technical Information (OSTI)

    Nachabe, Mahmood H. (Mahmood H. Nachabe) - Department of Civil and Environmental Engineering, University of South Florida Neal, Clive R.(Clive R.Neal).- Department of Civil ...

  18. Browse by Discipline -- E-print Network Subject Pathways: Plasma...

    Office of Scientific and Technical Information (OSTI)

    Laaksonen, Toni (Toni Laaksonen) - Department of Biology, University of Turku Lastoskie, Christian M. (Christian M. Lastoskie) - Department of Civil and Environmental Engineering, ...

  19. Browse by Discipline -- E-print Network Subject Pathways: Biotechnolog...

    Office of Scientific and Technical Information (OSTI)

    ... R. (Enrique R. Vivoni) - Department of Civil and Environmental Engineering, Arizona ... M. (Richard M. Vogel) - Department of Civil and Environmental Engineering, Tufts ...

  20. Browse by Discipline -- E-print Network Subject Pathways: Physics...

    Office of Scientific and Technical Information (OSTI)

    M. Talat (M. Talat Odman) - School of Civil and Environmental Engineering, Georgia ... Caglar (Caglar Oskay) - Department of Civil and Environmental Engineering, Vanderbilt ...

  1. Browse by Discipline -- E-print Network Subject Pathways: Plasma...

    Office of Scientific and Technical Information (OSTI)

    Barlaz, Morton A. (Morton A. Barlaz) - Department of Civil, Construction, and ... William (William Burgos) - Department of Civil and Environmental Engineering, ...

  2. Browse by Discipline -- E-print Network Subject Pathways: Mathematics...

    Office of Scientific and Technical Information (OSTI)

    "Jason" (Zhen "Jason" He) - Department of Civil Engineering and Mechanics, University of ... Mark (Mark Hickman) - Department of Civil Engineering and Engineering Mechanics, ...

  3. Browse by Discipline -- E-print Network Subject Pathways: Environmenta...

    Office of Scientific and Technical Information (OSTI)

    Narayan, Ramani (Ramani Narayan) - Department of Chemical Engineering and Materials Science, Michigan State University Nash, Gregory D. (Gregory D. Nash) - Department of Civil and ...

  4. Browse by Discipline -- E-print Network Subject Pathways: Environmenta...

    Office of Scientific and Technical Information (OSTI)

    Resources, University of Alberta Mallick, Rajib B. (Rajib B. Mallick) - Department of Civil and Environmental Engineering, Worcester Polytechnic Institute McCready, Mark J. (Mark ...

  5. Browse by Discipline -- E-print Network Subject Pathways: Chemistry...

    Office of Scientific and Technical Information (OSTI)

    Qi, Limin (Limin Qi) - College of Chemistry, Peking University Qiao, Pizhong (Pizhong Qiao) - Department of Civil Engineering, University of Akron Qin, Lu-Chang (Lu-Chang Qin) - ...

  6. Browse by Discipline -- E-print Network Subject Pathways: Mathematics...

    Office of Scientific and Technical Information (OSTI)

    of Civil and Environmental Engineering, Rensselaer Polytechnic Institute Barkan, Christopher P.L. (Christopher P.L. Barkan) - Railroad Engineering Program & Department of Civil and ...

  7. Browse by Discipline -- E-print Network Subject Pathways: Biotechnolog...

    Office of Scientific and Technical Information (OSTI)

    ... (Christian M. Lastoskie) - Department of Civil and Environmental Engineering, University ... Bernard (Bernard Laval) - Department of Civil Engineering, University of British ...

  8. Browse by Discipline -- E-print Network Subject Pathways: Mathematics...

    Office of Scientific and Technical Information (OSTI)

    Princeton University Prevedouros, Panos D. (Panos D. Prevedouros) - Department of Civil and Environmental Engineering, University of Hawai'i at Manoa Pu, Shi (Shi Pu) - ...

  9. Browse by Discipline -- E-print Network Subject Pathways: Mathematics...

    Office of Scientific and Technical Information (OSTI)

    Z Zhai, John Z. (John Z. Zhai) - Department of Civil, Environmental, and Architectural Engineering, University of Colorado at Boulder Zhao, Tianshou (Tianshou Zhao) - Department ...

  10. Browse by Discipline -- E-print Network Subject Pathways: Biotechnolog...

    Office of Scientific and Technical Information (OSTI)

    (Dongxiao Zhang) - Departments of Chemical Engineering and Materials Science & Civil and Environmental Engineering, University of Southern California Zhang, Fuqing (Fuqing ...

  11. Browse by Discipline -- E-print Network Subject Pathways: Biotechnolog...

    Office of Scientific and Technical Information (OSTI)

    ... Anisotropy Project Eidgenssische Technische Hochschule Zrich (ETHZ), Department of Civil, Environmental and Geomatics Engineering, Geodetic Metrology and Engineering Geodesy

  12. Browse by Discipline -- E-print Network Subject Pathways: Plasma...

    Office of Scientific and Technical Information (OSTI)

    Scott A. (Scott A. Wells) - Department of Civil Engineering and Environmental Sciences, ... D. (Allan D. Woodbury) - Department of Civil Engineering, University of Manitoba Go ...

  13. Browse by Discipline -- E-print Network Subject Pathways: Mathematics...

    Office of Scientific and Technical Information (OSTI)

    Chen, Zheng (Zheng Chen) - Department of Mechanics and Aerospace Engineering, Peking University Coifman, Benjamin (Benjamin Coifman) - Departments of Electrical Engineering & Civil ...

  14. Browse by Discipline -- E-print Network Subject Pathways: Mathematics...

    Office of Scientific and Technical Information (OSTI)

    Wang, Yinhai (Yinhai Wang) - Department of Civil and Environmental Engineering, University ... Chien H. (Chien H. Wu) - Department of Civil and Materials Engineering, University of ...

  15. Browse by Discipline -- E-print Network Subject Pathways: Plasma...

    Office of Scientific and Technical Information (OSTI)

    Resources, University of Washington Dupont, R. Ryan (R. Ryan Dupont) - Department of Civil and Environmental Engineering, Utah State University Go back to Individual Researchers ...

  16. Browse by Discipline -- E-print Network Subject Pathways: Environmenta...

    Office of Scientific and Technical Information (OSTI)

    University of Wisconsin at Madison Logan, Bruce E.(Bruce E.Logan).- Department of Civil and Environmental Engineering, Pennsylvania State University Go back to Individual ...

  17. Browse by Discipline -- E-print Network Subject Pathways: Environmenta...

    Office of Scientific and Technical Information (OSTI)

    "Jason" (Zhen "Jason" He) - Department of Civil Engineering and Mechanics, University of ... (Slawomir W. Hermanowicz) - Department of Civil and Environmental Engineering, University ...

  18. Browse by Discipline -- E-print Network Subject Pathways: Plasma...

    Office of Scientific and Technical Information (OSTI)

    Southeastern Louisiana University Pitt, Robert E. (Robert E. Pitt) - Department of Civil and Environmental Engineering, University of Alabama Go back to Individual Researchers ...

  19. Browse by Discipline -- E-print Network Subject Pathways: Mathematics...

    Office of Scientific and Technical Information (OSTI)

    University of Texas at Arlington Logan, Bruce E.(Bruce E.Logan).- Department of Civil and Environmental Engineering, Pennsylvania State University Long, Marshall B. ...

  20. Browse by Discipline -- E-print Network Subject Pathways: Biology...

    Office of Scientific and Technical Information (OSTI)

    University of Science and Technology Guzina, Bojan (Bojan Guzina) - Department of Civil Engineering, University of Minnesota Go back to Individual Researchers Collections: A B ...

  1. Browse by Discipline -- E-print Network Subject Pathways: Mathematics...

    Office of Scientific and Technical Information (OSTI)

    Rakas, Jasenka (Jasenka Rakas) - Department of Civil and Environmental Engineering, University of California at Berkeley Rakha, Hesham A. (Hesham A. Rakha) - Department of Civil ...

  2. Browse by Discipline -- E-print Network Subject Pathways: Plasma...

    Office of Scientific and Technical Information (OSTI)

    Alvarez, Pedro J. (Pedro J. Alvarez) - Department of Civil and Environmental Engineering, Rice University Alvarez-Cohen, Lisa (Lisa Alvarez-Cohen) - Department of Civil and ...

  3. Browse by Discipline -- E-print Network Subject Pathways: Fission...

    Office of Scientific and Technical Information (OSTI)

    E F G H I J K L M N O P Q R S T U V W X Y Z Davis, Jenna (Jenna Davis) - Department of Civil and Environmental Engineering, Stanford University de Jongh, Dick (Dick de Jongh) - ...

  4. Browse by Discipline -- E-print Network Subject Pathways: Mathematics...

    Office of Scientific and Technical Information (OSTI)

    F G H I J K L M N O P Q R S T U V W X Y Z Figliozzi, Miguel Andres (Miguel Andres Figliozzi) - Department of Civil Engineering and Environmental Sciences, Portland State University ...

  5. Browse by Discipline -- E-print Network Subject Pathways: Environmenta...

    Office of Scientific and Technical Information (OSTI)

    A. (Morton A. Barlaz) - Department of Civil, Construction, and Environmental ... Water Research Laboratory & Department of Civil and Environmental Engineering, Utah State ...

  6. Browse by Discipline -- E-print Network Subject Pathways: Mathematics...

    Office of Scientific and Technical Information (OSTI)

    Jaillet, Patrick (Patrick Jaillet) - Department of Civil and Environmental Engineering, Massachusetts Institute of Technology (MIT) Jin, Wenlong (Wenlong Jin) - Department of Civil ...

  7. Browse by Discipline -- E-print Network Subject Pathways: Mathematics...

    Office of Scientific and Technical Information (OSTI)

    Daganzo, Carlos F. (Carlos F. Daganzo) - Department of Civil and Environmental ... (Pablo Durango-Cohen) - Department of Civil and Environmental Engineering, ...

  8. Browse by Discipline -- E-print Network Subject Pathways: Power...

    Office of Scientific and Technical Information (OSTI)

    Mark (Mark Jacobson) - Department of Civil and Environmental Engineering, Stanford ... Jay, David (David Jay) - Department of Civil Engineering and Environmental Sciences, ...

  9. Browse by Discipline -- E-print Network Subject Pathways: Plasma...

    Office of Scientific and Technical Information (OSTI)

    Zheng, Chunmiao (Chunmiao Zheng) - Department of Geological Sciences, University of Alabama in Tuscaloosa Zornberg, Jorge G. (Jorge G. Zornberg) - Department of Civil, ...

  10. Browse by Discipline -- E-print Network Subject Pathways: Mathematics...

    Office of Scientific and Technical Information (OSTI)

    University of California at Los Angeles Tufte, Kristin (Kristin Tufte) - Department of Civil Engineering and Environmental Sciences, Portland State University Go back to Individual ...

  11. Browse by Discipline -- E-print Network Subject Pathways: Physics...

    Office of Scientific and Technical Information (OSTI)

    ... Animesh (Animesh Das) - Department of Civil Engineering, Indian Institute of ... Jenna (Jenna Davis) - Department of Civil and Environmental Engineering, Stanford ...

  12. Browse by Discipline -- E-print Network Subject Pathways: Mathematics...

    Office of Scientific and Technical Information (OSTI)

    Services Program Massachusetts Institute of Technology (MIT),Department of Civil and Environmental Engineering, Airport Systems Planning, Design, and Management ...

  13. Browse by Discipline -- E-print Network Subject Pathways: Biotechnolog...

    Office of Scientific and Technical Information (OSTI)

    ... D. (Steven D. Glaser) - Department of Civil and Environmental Engineering, University ... N. (Michael N. Gooseff) - Department of Civil and Environmental Engineering, ...

  14. Browse by Discipline -- E-print Network Subject Pathways: Mathematics...

    Office of Scientific and Technical Information (OSTI)

    University of Dayton Kockelman, Kara M. (Kara M. Kockelman) - Department of Civil, Architectural and Environmental Engineering, University of Texas at Austin Kohli, ...

  15. Browse by Discipline -- E-print Network Subject Pathways: Physics...

    Office of Scientific and Technical Information (OSTI)

    ... Zong Z. (Zong Z. Tian) - Department of Civil and Environmental Engineering, University ... Titi, Hani (Hani Titi) - Department of Civil Engineering and Mechanics, University of ...

  16. Browse by Discipline -- E-print Network Subject Pathways: Biology...

    Office of Scientific and Technical Information (OSTI)

    J K L M N O P Q R S T U V W X Y Z Joseph, Tim Grain (Tim Grain Joseph) - Department of Civil and Environmental Engineering, University of Alberta Go back to Individual Researchers ...

  17. Browse by Discipline -- E-print Network Subject Pathways: Physics...

    Office of Scientific and Technical Information (OSTI)

    ... Paul (Paul Gauvreau) - Department of Civil Engineering, University of Toronto Gavin, Henri (Henri Gavin) - Department of Civil and Environmental Engineering, Duke ...

  18. Browse by Discipline -- E-print Network Subject Pathways: Biotechnolog...

    Office of Scientific and Technical Information (OSTI)

    Stefan (Stefan Talke) - Department of Civil and Environmental Engineering, University ... Architecture, Geoinformatics, Geodesy and Civil Engineering, Hochschule Neubrandenburg ...

  19. Browse by Discipline -- E-print Network Subject Pathways: Physics...

    Office of Scientific and Technical Information (OSTI)

    ... (Rafael Hernndez-Walls) - Facultad de Ciencias Marinas, Universidad Autonoma de Baja California Hero, Alfred O. (Alfred O. Hero) - Department of Electrical Engineering and ...

  20. Browse by Discipline -- E-print Network Subject Pathways: Biotechnolog...

    Office of Scientific and Technical Information (OSTI)

    ... (Rafael Hernndez-Walls) - Facultad de Ciencias Marinas, Universidad Autonoma de Baja California Hernes, Peter J. (Peter J. Hernes) - Department of Land, Air and Water ...

  1. Browse by Discipline -- E-print Network Subject Pathways: Power...

    Office of Scientific and Technical Information (OSTI)

    ... Diego-Rasilla) - Departamento de Biologa Animal, Ecologa, Parasitologa, Edafologa y Qumica Agrcola, Universidad de Salamanca Diekmann, Martin (Martin Diekmann) - ...

  2. Microsoft Word - Clouds of Changing Times Lesson- print!.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    a basic keyboard. Primary * 1B - Know and be able to use a computer keyboard (enter, esc, alt). Primary Third Grade Language Arts * 2C - Be able to conduct research (locate,...

  3. Browse by Discipline -- E-print Network Subject Pathways: Environmenta...

    Office of Scientific and Technical Information (OSTI)

    S T U V W X Y Z Saha, Tapan Kumar (Tapan Kumar Saha) - School of Information Technology and Electrical Engineering, University of Queensland Silva, Filipe Faria Da (Filipe Faria ...

  4. Browse by Discipline -- E-print Network Subject Pathways: Environmenta...

    Office of Scientific and Technical Information (OSTI)

    I J K L M N O P Q R S T U V W X Y Z Kerekes, Tamas (Tamas Kerekes) - Department of Energy Technology, Aalborg University Kwatny, Harry G. (Harry G. Kwatny) - Department of ...

  5. Browse by Discipline -- E-print Network Subject Pathways: Environmenta...

    Office of Scientific and Technical Information (OSTI)

    X Y Z Weber, Harald (Harald Weber) - Fakultt fr Informatik und Elektrotechnik, Universitt Rostock Wehenkel, Louis (Louis Wehenkel) - Dpartement d'Electricit, Electronique ...

  6. Browse by Discipline -- E-print Network Subject Pathways: Environmenta...

    Office of Scientific and Technical Information (OSTI)

    N O P Q R S T U V W X Y Z Mahat, Pukar (Pukar Mahat) - Department of Energy Technology, Aalborg University Mart, Jos R. (Jos R. Mart) - Department of Electrical and ...

  7. Browse by Discipline -- E-print Network Subject Pathways: Environmenta...

    Office of Scientific and Technical Information (OSTI)

    F G H I J K L M N O P Q R S T U V W X Y Z Ford, Andrew (Andrew Ford) - School of Earth and Environmental Sciences, Washington State University Fowlie, Meredith (Meredith Fowlie) - ...

  8. Browse by Discipline -- E-print Network Subject Pathways: Environmenta...

    Office of Scientific and Technical Information (OSTI)

    H I J K L M N O P Q R S T U V W X Y Z Heinemann, Detlev (Detlev Heinemann) - Institut fr Physik, Carl von Ossietzky Universitt Oldenburg Hines, Paul (Paul Hines) - School of ...

  9. Browse by Discipline -- E-print Network Subject Pathways: Environmenta...

    Office of Scientific and Technical Information (OSTI)

    O P Q R S T U V W X Y Z Go back to Individual Researchers Collections: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z Northwest Power Planning Council

  10. Browse by Discipline -- E-print Network Subject Pathways: Environmenta...

    Office of Scientific and Technical Information (OSTI)

    B C D E F G H I J K L M N O P Q R S T U V W X Y Z Abdel-Aal, Radwan E. (Radwan E. Abdel-Aal) - Computer Engineering Department, King Fahd University of Petroleum and Minerals Amin, ...

  11. Browse by Discipline -- E-print Network Subject Pathways: Environmenta...

    Office of Scientific and Technical Information (OSTI)

    X Y Z Zareipour, Hamidreza (Hamidreza Zareipour) - Department of Electrical and Computer Engineering, University of Calgary Zhao, Yue (Yue Zhao) - Department of Electrical ...

  12. Browse by Discipline -- E-print Network Subject Pathways: Environmenta...

    Office of Scientific and Technical Information (OSTI)

    Q R S T U V W X Y Z Pola, Giordano (Giordano Pola) - Dipartimento di Ingegneria Elettrica, Universit dell'Aquila Go back to Individual Researchers Collections: A B C D E F G H I ...

  13. Browse by Discipline -- E-print Network Subject Pathways: Environmenta...

    Office of Scientific and Technical Information (OSTI)

    F G H I J K L M N O P Q R S T U V W X Y Z Ernst, Damien (Damien Ernst) - Dpartement d'Electricit, Electronique et Informatique, Universit de Lige Go back to Individual ...

  14. PSA Vol 1 Tables Revised Ver 2 Print.xls

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    0 1,605 9 0 1 1,627 9 0 Natural Gas Liquids and LRGs 17 41 64 101 - -4 5 3 220 Pentanes Plus 3 - 0 0 - 0 0 0 3 Liquefied Petroleum Gases 14 41 64 101 - -4 5 3 217 EthaneEthylene...

  15. PSA Vol 1 Tables Revised Ver 2 Print.xls

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    - - - - - 14 - - - Natural Gas Liquids and LRGs 298 105 110 47 - -5 118 14 433 Pentanes Plus 33 - 1 25 - 0 48 4 7 Liquefied Petroleum Gases 265 105 109 22 - -4 70 9 426 Ethane...

  16. Browse by Discipline -- E-print Network Subject Pathways: Environmenta...

    Office of Scientific and Technical Information (OSTI)

    Researchers Collections: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z Lawrence Berkeley National Laboratory, Energy Analysis Department, Electricity Market Studies

  17. Browse by Discipline -- E-print Network Subject Pathways: Fossil...

    Office of Scientific and Technical Information (OSTI)

    A B C D E F G H I J K L M N O P Q R S T U V W X Y Z Korea Advanced Institute of Science and Technology, Department of Chemical and Biomolecular Engineering, Metabolic & ...

  18. PSA Vol 1 Tables Revised Ver 2 Print.xls

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    4,395 949 6,731 1,029 744 1,773 Non OPEC 928,991 3,672 19,941 130,776 874 9,600 10,474 Angola 81,615 10 1,979 1,923 0 0 0 Argentina 2,486 1 2,703 167 0 646 646 Aruba 0 0 0 23,145 0...

  19. PSA Vol 1 Tables Revised Ver 2 Print.xls

    Gasoline and Diesel Fuel Update (EIA)

    0 175 374 7,010 6,188 13,198 Non OPEC 259,980 0 17,385 23,792 78,059 104,593 182,652 Angola 53,254 0 0 100 0 0 0 Argentina 0 0 128 621 0 2,707 2,707 Aruba 0 0 0 1,163 0 0 0...

  20. PSA Vol 1 Tables Revised Ver 2 Print.xls

    Gasoline and Diesel Fuel Update (EIA)

    8,039 6,932 14,971 Non OPEC 1,938,257 4,376 81,256 172,714 78,933 123,273 202,206 Angola 166,404 10 1,979 2,023 0 0 0 Argentina 20,608 1 2,831 788 0 3,353 3,353 Aruba 0 0 0...

  1. PSA Vol 1 Tables Revised Ver 2 Print.xls

    Gasoline and Diesel Fuel Update (EIA)

    0 0 0 0 0 0 0 Venezuela 13,880 0 0 0 0 0 0 Non OPEC 435,408 483 39,774 627 0 877 877 Angola 14,731 0 0 0 0 0 0 Argentina 150 0 0 0 0 0 0 Aruba 0 0 0 294 0 0 0 Australia 314 0 0 0...

  2. Structural color printing based on plasmonic metasurfaces of...

    Office of Scientific and Technical Information (OSTI)

    ... | 5:11045 | DOi: I0.i038srepii045 1 www.nature.comscientificreports Figure 1. ... The presence of the SCiENTiFiC REPORTS | 5:11045 | DOi: I0.i038srepii045 2 www.nature.com...

  3. DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    design drawing adapted to the real TF inboard environment. The technique of spot welding positioning, fixation by gluing, clamping of panel through uniform applied pressure...

  4. Browse by Discipline -- E-print Network Subject Pathways: Computer...

    Office of Scientific and Technical Information (OSTI)

    Universit Joseph Fourier Grenoble-I Gallego, Eduardo (Eduardo Gallego) - Departament ... Science, University of Waterloo Gedeon, Tomas (Tomas Gedeon) - Department of ...

  5. Browse by Discipline -- E-print Network Subject Pathways: Environmenta...

    Office of Scientific and Technical Information (OSTI)

    Z Yin, Chungen (Chungen Yin) - Department of Energy Technology, Aalborg University Go back to Individual Researchers Collections: A B C D E F G H I J K L M N O P Q R S T U V W X Y...

  6. Browse by Discipline -- E-print Network Subject Pathways: Environmenta...

    Office of Scientific and Technical Information (OSTI)

    H I J K L M N O P Q R S T U V W X Y Z Garca, Oscar (Oscar Garca) - Forestry Program, University of Northern British Columbia Gieg, Lisa (Lisa Gieg) - Department of Biological...

  7. Browse by Discipline -- E-print Network Subject Pathways: Environmenta...

    Office of Scientific and Technical Information (OSTI)

    W X Y Z Vanlerberghe, Greg C. (Greg C. Vanlerberghe) - Department of Biological Sciences, University of Toronto at Scarborough Go back to Individual Researchers Collections: A B C...

  8. Browse by Discipline -- E-print Network Subject Pathways: Environmenta...

    Office of Scientific and Technical Information (OSTI)

    J K L M N O P Q R S T U V W X Y Z Ingram, David (David Ingram) - Institute for Energy Systems, University of Edinburgh Iqbal, M. Tariq (M. Tariq Iqbal) - Faculty of Engineering and...

  9. Browse by Discipline -- E-print Network Subject Pathways: Environmenta...

    Office of Scientific and Technical Information (OSTI)

    - Finnish Forest Research Institute Toor, Saqib (Saqib Toor) - Department of Energy Technology, Aalborg University Go back to Individual Researchers Collections: A B C D E F G H I...

  10. Browse by Discipline -- E-print Network Subject Pathways: Environmenta...

    Office of Scientific and Technical Information (OSTI)

    - Nanosolar, Inc. Kr, Sren Knudsen (Sren Knudsen Kr) - Department of Energy Technology, Aalborg University Go back to Individual Researchers Collections: A B C D E F G H I...

  11. Browse by Discipline -- E-print Network Subject Pathways: Environmenta...

    Office of Scientific and Technical Information (OSTI)

    F G H I J K L M N O P Q R S T U V W X Y Z Energy Research Centre of the Netherland(nergy Research Centre of the Netherlan)ds Evans, Robert O.(Robert O.Evans).- Department of...

  12. Browse by Discipline -- E-print Network Subject Pathways: Environmenta...

    Office of Scientific and Technical Information (OSTI)

    R S T U V W X Y Z Qin, Wensheng (Wensheng Qin) - Department of Biology, Lakehead University Go back to Individual Researchers Collections: A B C D E F G H I J K L M N O P Q R S T U...

  13. Browse by Discipline -- E-print Network Subject Pathways: Biotechnolog...

    Office of Scientific and Technical Information (OSTI)

    Simon (Simon Allen) - School of GeoSciences, University of Edinburgh Allen, Stewart (Stewart Allen) - Centre for Australian Weather and Climate Research, Bureau of Meteorology ...

  14. Browse by Discipline -- E-print Network Subject Pathways: Geosciences...

    Office of Scientific and Technical Information (OSTI)

    ... Simon (Simon Allen) - School of GeoSciences, University of Edinburgh Allen, Stewart (Stewart Allen) - Centre for Australian Weather and Climate Research, Bureau of Meteorology ...

  15. Browse by Discipline -- E-print Network Subject Pathways: Environmenta...

    Office of Scientific and Technical Information (OSTI)

    Ewen (Ewen Ritchie) - Department of Energy Technology, Aalborg University Rood, Stewart (Stewart Rood) - Department of Biological Sciences, University of Lethbridge Rosendahl, ...

  16. Browse by Discipline -- E-print Network Subject Pathways: Energy...

    Office of Scientific and Technical Information (OSTI)

    ENEA Attari, Shahzeen Z. (Shahzeen Z. Attari) - Department of Psychological and Brain Sciences, Indiana University Azad, Abdul-Majeed (Abdul-Majeed Azad) - Department of ...

  17. Browse by Discipline -- E-print Network Subject Pathways: Mathematics...

    Office of Scientific and Technical Information (OSTI)

    ENEA Attari, Shahzeen Z. (Shahzeen Z. Attari) - Department of Psychological and Brain Sciences, Indiana University Azad, Abdul-Majeed (Abdul-Majeed Azad) - Department of ...

  18. Browse by Discipline -- E-print Network Subject Pathways: Fossil...

    Office of Scientific and Technical Information (OSTI)

    Jackson, Scott A. (Scott A. Jackson) - Department of Agronomy, Purdue University Jeong, Jaeseung (Jaeseung Jeong) - Department of Bio and Brain Engineering, Korea Advanced ...

  19. Browse by Discipline -- E-print Network Subject Pathways: Physics...

    Office of Scientific and Technical Information (OSTI)

    ... Jong Chul -Department of Bio and Brain Engineering, Korea Advanced Institute of Science and Technolog(e, Jong Chul -Department of Bio and Brain Engineering, Korea Advanced ...

  20. Browse by Discipline -- E-print Network Subject Pathways: Physics...

    Office of Scientific and Technical Information (OSTI)

    Engineering, University of Michigan Inati, Souheil (Souheil Inati) - Center for Brain Imaging & Department of Psychology, New York University Ingram, Mary Ann (Mary Ann ...

  1. Browse Societies by Language -- E-print Network Societies by...

    Office of Scientific and Technical Information (OSTI)

    Molecular Biology -- Biostatistiikan seura ry Finnish Society of Biostatistics -- Brain Research Society of Finland (BRSF) TOP - A B C D E F G H I J K L M N O P Q R S T U V W ...

  2. Browse by Discipline -- E-print Network Subject Pathways: Environmenta...

    Office of Scientific and Technical Information (OSTI)

    University of Texas at Austin Barfuss, Steven L. (Steven L. Barfuss) - Utah Water Research Laboratory, Utah State University Blumsack, Seth (Seth Blumsack) - Department of ...

  3. Browse by Discipline -- E-print Network Subject Pathways: Plasma...

    Office of Scientific and Technical Information (OSTI)

    Commonwealth University Gross, Amit (Amit Gross) - Zuckerberg Institute for Water Research, Zuckerberg Institute for Water Research, Jacob Blaustein Institutes for Desert ...

  4. Browse by Discipline -- E-print Network Subject Pathways: Plasma...

    Office of Scientific and Technical Information (OSTI)

    G H I J K L M N O P Q R S T U V W X Y Z Fitzpatrick, Rob (Rob Fitzpatrick) - Land and Water Division, Commonwealth Scientific and Industrial Research Organisation (CSIRO) Flaxman, ...

  5. Browse by Discipline -- E-print Network Subject Pathways: Plasma...

    Office of Scientific and Technical Information (OSTI)

    Ecole des Mines de Nantes Kasher, Roni (Roni Kasher) - Zuckerberg Institute for Water Research, Zuckerberg Institute for Water Research, Jacob Blaustein Institutes for Desert ...

  6. 2013-01-30 IBMcel_print_SCcrop.pdf

    National Nuclear Security Administration (NNSA)

  7. Browse by Discipline -- E-print Network Subject Pathways: Environmenta...

    Office of Scientific and Technical Information (OSTI)

    Delaware, University of - Center for Carbon-free Power Integration, Offshore Wind Power Project DOE Office of Energy Efficiency and Renewable Energy, Hydrogen, Fuel Cells and ...

  8. Browse by Discipline -- E-print Network Subject Pathways: Materials...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... City University of Hong Kong Tan, Chew Lim (Chew Lim Tan) - Department of Computational Science, National University of Singapore Tan, Colin Keng-Yan (Colin Keng-Yan Tan) - ...

  9. Browse by Discipline -- E-print Network Subject Pathways: Materials...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Technology, Monash University Kan, Min-Yen (Min-Yen Kan) - Department of Computational Science, National University of Singapore Kanade, Aditya (Aditya Kanade) - Department of ...

  10. Browse by Discipline -- E-print Network Subject Pathways: Materials...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... of Petroleum and Minerals Magill, Evan H. (Evan H. Magill) - Department of Computing Science and Mathematics, University of Stirling Magnien, Clmence (Clmence Magnien) - ...

  11. Browse by Discipline -- E-print Network Subject Pathways: Materials...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Science, Denison University Lalmas, Mounia (Mounia Lalmas) - Department of Computing Science, University of Glasgow Lam, Kenneth K. M. (Kenneth K. M. Lam) - Department of ...

  12. Browse by Discipline -- E-print Network Subject Pathways: Materials...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Engineering, Yale University Hadley, Robert F. (Robert F. Hadley) - School of Computing Science, Simon Fraser University Hadzilacos, Vassos (Vassos Hadzilacos) - Department of ...

  13. Browse by Discipline -- E-print Network Subject Pathways: Materials...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Science, Cornell University Balaam, Madeline (Madeline Balaam) - School of Computing Science, University of Newcastle upon Tyne Balaban, Mira (Mira Balaban) - Department of ...

  14. Browse by Discipline -- E-print Network Subject Pathways: Materials...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    University of Wales, Newport Dahl, Vernica (Vernica Dahl) - School of Computing Science, Simon Fraser University Dahlberg, Teresa A. (Teresa A. Dahlberg) - Department of ...

  15. Browse by Discipline -- E-print Network Subject Pathways: Materials...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of California at San Diego Calder, Muffy (Muffy Calder) - Department of Computing Science, University of Glasgow Caldwell, James (James Caldwell) - Department of Computer ...

  16. Browse by Discipline -- E-print Network Subject Pathways: Materials...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Dublin City University O'Donnell, John (John O'Donnell) - Department of Computing Science, University of Glasgow O'Donnell, Michael J. (Michael J. O'Donnell) - Department ...

  17. Browse by Discipline -- E-print Network Subject Pathways: Materials...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Institute of Technology Rafiei, Davood (Davood Rafiei) - Department of Computing Science, University of Alberta Ragde, Prabhakar (Prabhakar Ragde) - School of Computer ...

  18. Browse by Discipline -- E-print Network Subject Pathways: Materials...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sabanovic, Selma (Selma Sabanovic) - School of Informatics and Computing, Indiana University Sabelfeld, Andrei (Andrei Sabelfeld) - Department of Computer Science and Engineering, ...

  19. DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    to provide part of the radiation shield of the NB H&CD system. Page 6 of 13 Figure 3: DNB Passive Magnetic Shield Mechanical engineering services are needed to validate the DNB PMS...

  20. 3D Printed Microscope for Mobile Devices that Cost Pennies

    SciTech Connect (OSTI)

    Erikson, Rebecca; Baird, Cheryl; Hutchinson, Janine

    2014-09-15

    Scientists at PNNL have designed a 3D-printable microscope for mobile devices using pennies worth of plastic and glass materials. The microscope has a wide range of uses, from education to in-the-field science.

  1. Browse by Discipline -- E-print Network Subject Pathways: Biotechnolog...

    Office of Scientific and Technical Information (OSTI)

    J K L M N O P Q R S T U V W X Y Z Ide, Kayo (Kayo Ide) - Department of Atmospheric and Oceanic Science, University of Maryland at College Park Ide, Kayo (Kayo Ide) - Department of ...

  2. Browse by Discipline -- E-print Network Subject Pathways: Physics...

    Office of Scientific and Technical Information (OSTI)

    of Electrical and Computer Engineering, University of Illinois at Chicago Zeger, Kenneth (Kenneth Zeger) - Department of Electrical and Computer Engineering, University of ...

  3. Browse by Discipline -- E-print Network Subject Pathways: Physics...

    Office of Scientific and Technical Information (OSTI)

    Lal) - School of Electrical and Computer Engineering, Cornell University Lam, Kenneth K. M. (Kenneth K. M. Lam) - Department of Electronic and Information Engineering, Hong Kong ...

  4. Browse by Discipline -- E-print Network Subject Pathways: Physics...

    Office of Scientific and Technical Information (OSTI)

    - Department of Chemical Engineering, Queen's University (Kingston) Waldron, Kenneth J. (Kenneth J. Waldron) - Department of Mechanical Engineering, Stanford University Waleffe, ...

  5. Browse by Discipline -- E-print Network Subject Pathways: Physics...

    Office of Scientific and Technical Information (OSTI)

    ... of Electrical Engineering, University of Washington at Seattle Jansen, Kenneth E. (Kenneth E. Jansen) - Scientific Computation Research Center, Rensselaer Polytechnic ...

  6. Browse by Discipline -- E-print Network Subject Pathways: Geosciences...

    Office of Scientific and Technical Information (OSTI)

    Department of Mechanical and Aerospace Engineering, Princeton University Carter, Kenneth (Kenneth Carter) - Department of Polymer Science and Engineering, University of ...

  7. Browse by Discipline -- E-print Network Subject Pathways: Materials...

    Office of Scientific and Technical Information (OSTI)

    ... of Electrical Engineering, Technion, Israel Institute of Technology Zeger, Kenneth (Kenneth Zeger) - Department of Electrical and Computer Engineering, University of ...

  8. Browse by Discipline -- E-print Network Subject Pathways: --...

    Office of Scientific and Technical Information (OSTI)

    A. Irizarry) - Department of Biostatistics, Johns Hopkins University Irvine, Kenneth (Kenneth Irvine) - Waksman Institute, Rutgers University Isaacs, Rufus (Rufus Isaacs) - ...

  9. Browse by Discipline -- E-print Network Subject Pathways: Chemistry...

    Office of Scientific and Technical Information (OSTI)

    - Division of Material Sciences, California Institute of Technology Eisenthal, Kenneth B. (Kenneth B. Eisenthal) - Department of Chemistry, Columbia University El-Naggar, Moh (Moh ...

  10. Browse by Discipline -- E-print Network Subject Pathways: Renewable...

    Office of Scientific and Technical Information (OSTI)

    Sullivan Sealey) - Department of Biology, University of Miami Shultis, J. Kenneth (J. Kenneth Shultis) - Department of Mechanical and Nuclear Engineering, Kansas State ...

  11. Browse by Discipline -- E-print Network Subject Pathways: Biotechnolog...

    Office of Scientific and Technical Information (OSTI)

    ... of Applied Physics and Applied Mathematics, Columbia University Finger, Kenneth L. (Kenneth L. Finger) - Museum of Paleontology, University of California at Berkeley ...

  12. Browse by Discipline -- E-print Network Subject Pathways: Biotechnolog...

    Office of Scientific and Technical Information (OSTI)

    ... - Department of Earth Sciences, Simon Fraser University Williford, Kenneth H. (Kenneth H. Williford) - Department of Geology and Geophysics, University of Wisconsin at ...

  13. Browse by Discipline -- E-print Network Subject Pathways: Fission...

    Office of Scientific and Technical Information (OSTI)

    (Kevin Kelly) - Department of Philosophy, Carnegie Mellon University Keniston, Kenneth (Kenneth Keniston) - Program in Science, Technology, and Society, Massachusetts Institute ...

  14. Browse by Discipline -- E-print Network Subject Pathways: Geosciences...

    Office of Scientific and Technical Information (OSTI)

    - Department of Chemistry and Biochemistry, University of Regina Eisenthal, Kenneth B. (Kenneth B. Eisenthal) - Department of Chemistry, Columbia University Eldridge, R. Bruce ...

  15. Browse by Discipline -- E-print Network Subject Pathways: Materials...

    Office of Scientific and Technical Information (OSTI)

    ... of Electrical and Electronics Engineering, Yeditepe University Yocum, Kenneth Grant (Kenneth Grant Yocum) - Department of Computer Science and Engineering, University of ...

  16. Browse by Discipline -- E-print Network Subject Pathways: Fossil...

    Office of Scientific and Technical Information (OSTI)

    (Carsten Wiuf) - Bioinformatics Research Center, University of Aarhus Wolfe, Kenneth H. (Kenneth H. Wolfe) - Genetics Department, Trinity College, University of Dublin Wriggers, ...

  17. Browse by Discipline -- E-print Network Subject Pathways: Geosciences...

    Office of Scientific and Technical Information (OSTI)

    M. Pitzer) - Department of Chemistry, Ohio State University Poeppelmeier, Kenneth R. (Kenneth R. Poeppelmeier) - Department of Chemistry, Northwestern University Porath, ...

  18. Browse by Discipline -- E-print Network Subject Pathways: Fossil...

    Office of Scientific and Technical Information (OSTI)

    Pereira de Arajo) - Departamento de Biologia Celular, University of Brasilia Pervouchine, ... - Department of Biochemistry and Molecular Biophysics, Washington University in St. ...

  19. Browse by Discipline -- E-print Network Subject Pathways: Energy...

    Office of Scientific and Technical Information (OSTI)

    ... of Engineering and Applied Sciences, Harvard University Kaye, Paul (Paul Kaye) - ... Kim, Dong-Woo (Dong-Woo Kim) - Harvard-Smithsonian Center for Astrophysics Kim, ...

  20. Browse by Discipline -- E-print Network Subject Pathways: Geosciences...

    Office of Scientific and Technical Information (OSTI)

    C. Harrison) - Department of Biological Chemistry and Molecular Pharmacology, Harvard University Hawthorne, M. Frederick (M. Frederick Hawthorne) - Department of Chemistry ...

  1. Browse by Discipline -- E-print Network Subject Pathways: Energy...

    Office of Scientific and Technical Information (OSTI)

    of Physics & Department of Mathematics, Harvard University Jaffe, Daniel T. (Daniel T. ... of Engineering and Applied Sciences, Harvard University Joselevich, Ernesto (Ernesto ...

  2. Browse by Discipline -- E-print Network Subject Pathways: Chemistry...

    Office of Scientific and Technical Information (OSTI)

    Venky (Venky Narayanamurti) - School of Engineering and Applied Sciences, Harvard University Nasibulin, Albert (Albert Nasibulin) - Skoltech Natelson, Douglas (Douglas ...

  3. Browse by Discipline -- E-print Network Subject Pathways: Fossil...

    Office of Scientific and Technical Information (OSTI)

    Mems in Medicine Labatories, Harvard University Deng, Xing-Wang (Xing-Wang ... (Aimee Dudley) - Department of Genetics, Harvard University Dumoulin, Serge O. (Serge O. ...

  4. Browse by Discipline -- E-print Network Subject Pathways: Chemistry...

    Office of Scientific and Technical Information (OSTI)

    of Engineering and Applied Sciences, Harvard University Mahmoodi, Hamid (Hamid ... Sciences & Department of Physics, Harvard University McBride, Carl (Carl McBride) - ...

  5. Browse by Discipline -- E-print Network Subject Pathways: Chemistry...

    Office of Scientific and Technical Information (OSTI)

    of Engineering and Applied Sciences, Harvard University Hammel, Chris (Chris Hammel) - ... - Departments of Chemistry & Physics, Harvard University Hellman, Frances (Frances ...

  6. Browse by Discipline -- E-print Network Subject Pathways: --...

    Office of Scientific and Technical Information (OSTI)

    Haberman) - Department of Psychology, Harvard University Haddrill, Penelope (Penelope ... Center & Department of Radiology, Harvard University Hagen, Edward H. (Edward H. ...

  7. Browse by Discipline -- E-print Network Subject Pathways: Energy...

    Office of Scientific and Technical Information (OSTI)

    Gabrielse) - Department of Physics, Harvard University Gaedke, Ansgar (Ansgar Gaedke) ... Garcia, Michael (Michael Garcia) - Harvard-Smithsonian Center for Astrophysics ...

  8. Browse by Discipline -- E-print Network Subject Pathways: Chemistry...

    Office of Scientific and Technical Information (OSTI)

    Aizenberg, Joanna (Joanna Aizenberg) - School of Engineering and Applied Sciences, Harvard ... of Engineering and Applied Sciences, Harvard University Go back to Individual ...

  9. Browse by Discipline -- E-print Network Subject Pathways: Materials...

    Office of Scientific and Technical Information (OSTI)

    Diego Nagpal, Radhika (Radhika Nagpal) - School of Engineering and Applied Sciences, Harvard University Nagurney, Anna (Anna Nagurney) - Isenberg School of Management, University ...

  10. Browse by Discipline -- E-print Network Subject Pathways: Geosciences...

    Office of Scientific and Technical Information (OSTI)

    of Engineering and Applied Sciences, Harvard University Martnez, Todd J. (Todd J. ... of Chemistry and Chemical Biology, Harvard University Mller, Peter (Peter Mller) ...

  11. Browse by Discipline -- E-print Network Subject Pathways: Plasma...

    Office of Scientific and Technical Information (OSTI)

    of Engineering and Applied Sciences, Harvard University Matin, A.C. (A.C. Matin) - ... of Organismic and Evolutionary Biology, Harvard University Morel, Franois M. M. ...

  12. Browse by Discipline -- E-print Network Subject Pathways: Energy...

    Office of Scientific and Technical Information (OSTI)

    L. Walsworth) - Department of Physics, Harvard University Walter, Frederick M. ... Bradford J. (Bradford J. Wargelin) - Harvard-Smithsonian Center for Astrophysics ...

  13. Browse by Discipline -- E-print Network Subject Pathways: Geosciences...

    Office of Scientific and Technical Information (OSTI)

    Xie, Xiaoliang Sunney (Xiaoliang Sunney Xie) - Department of Chemistry and Chemical Biology, Harvard University Xing, Bengang (Bengang Xing) - Division of Chemistry and Biological ...

  14. Browse by Discipline -- E-print Network Subject Pathways: Power...

    Office of Scientific and Technical Information (OSTI)

    of Organismic and Evolutionary Biology, Harvard University Hjek, Tom (Tom ... of Organismic and Evolutionary Biology, Harvard University Hartley, Stephen (Stephen ...

  15. Browse by Discipline -- E-print Network Subject Pathways: Fission...

    Office of Scientific and Technical Information (OSTI)

    College Canales, Jimena (Jimena Canales) - Department of the History of Science, Harvard University Carlson, Lawrence E. (Lawrence E. Carlson) - Department of Mechanical ...

  16. Browse by Discipline -- E-print Network Subject Pathways: Geosciences...

    Office of Scientific and Technical Information (OSTI)

    ... of Chemistry and Chemical Biology, Harvard University Lim, Sang-Hyun (Sang-Hyun Lim) ... of Chemistry and Chemical Biology, Harvard University Liu, Gang-yu (Gang-yu Liu) - ...

  17. Browse by Discipline -- E-print Network Subject Pathways: Physics...

    Office of Scientific and Technical Information (OSTI)

    of Engineering and Applied Sciences, Harvard University Nagurka, Mark L. (Mark L. ... for Biologically Inspired Engineering, Harvard University Narain, Amitabh (Amitabh ...

  18. Browse by Discipline -- E-print Network Subject Pathways: Geosciences...

    Office of Scientific and Technical Information (OSTI)

    Farrar) - NMR Athinoula A. Martinos Center, Massachusetts General Hospital, Harvard University Farrar, James M. (James M. Farrar) - Department of Chemistry, University of ...

  19. Browse by Discipline -- E-print Network Subject Pathways: Fossil...

    Office of Scientific and Technical Information (OSTI)

    Goodrich) - Department of Neurobiology, Harvard University Gopalan, Venkat (Venkat ... - Department of Systems Biology, Harvard University Go back to Individual ...

  20. Browse by Discipline -- E-print Network Subject Pathways: Materials...

    Office of Scientific and Technical Information (OSTI)

    Aizenberg, Joanna (Joanna Aizenberg) - School of Engineering and Applied Sciences, Harvard ... of Engineering and Applied Sciences, Harvard University Go back to Individual ...

  1. Browse by Discipline -- E-print Network Subject Pathways: Fission...

    Office of Scientific and Technical Information (OSTI)

    - Department of the History of Science, Harvard University Shen, Chia (Chia Shen) - School of Engineering and Applied Sciences, Harvard University Sheridan, Jennifer (Jennifer ...

  2. Browse by Discipline -- E-print Network Subject Pathways: Biotechnolog...

    Office of Scientific and Technical Information (OSTI)

    Orr) - Marine Environment Laboratories, Monaco Oswald, Wyatt (Wyatt Oswald) - Harvard Forest, Harvard University Ouillon, Sylvain (Sylvain Ouillon) - Laboratoire d'Etudes en ...

  3. Browse by Discipline -- E-print Network Subject Pathways: Chemistry...

    Office of Scientific and Technical Information (OSTI)

    ... (Eugene Demler) - Department of Physics, Harvard University Demouchy, Sylvie (Sylvie ... (Zvonimir Dogic) - Rowland Institute at Harvard, Harvard University Dokmeci, Mehmet ...

  4. Browse by Discipline -- E-print Network Subject Pathways: Energy...

    Office of Scientific and Technical Information (OSTI)

    Z Yacoby, Amir (Amir Yacoby) - Department of Physics, Harvard University Yamamoto, Yoshiharu (Yoshiharu Yamamoto) - Graduate School of Education, University of Tokyo Yamamura, ...

  5. Browse by Discipline -- E-print Network Subject Pathways: Geosciences...

    Office of Scientific and Technical Information (OSTI)

    Jackson, Sophie (Sophie Jackson) - Department of Chemistry, University of Cambridge Jacobsen, Eric N. (Eric N. Jacobsen) - Department of Chemistry and Chemical Biology, Harvard ...

  6. Browse by Discipline -- E-print Network Subject Pathways: Fossil...

    Office of Scientific and Technical Information (OSTI)

    Xie, Xiaoliang Sunney (Xiaoliang Sunney Xie) - Department of Chemistry and Chemical Biology, Harvard University Xing, Bengang (Bengang Xing) - Division of Chemistry and Biological ...

  7. Browse by Discipline -- E-print Network Subject Pathways: --...

    Office of Scientific and Technical Information (OSTI)

    ... Gaudet, Rachelle (Rachelle Gaudet) - Department of Molecular and Cellular Biology, Harvard ... of Organismic and Evolutionary Biology, Harvard University Giri, Ranjit K. (Ranjit K. ...

  8. Browse by Discipline -- E-print Network Subject Pathways: Computer...

    Office of Scientific and Technical Information (OSTI)

    ... - Laboratoire Jean Alexandre Dieudonn, Universit de Nice Sophia Antipolis Jung, Paul (Paul Jung) - Department of Mathematics, Cornell University Jung, Paul (Paul Jung) - ...

  9. Browse by Discipline -- E-print Network Subject Pathways: Fossil...

    Office of Scientific and Technical Information (OSTI)

    Imoto) - Laboratory of DNA Information Analysis, Human Genome Center, University of Tokyo. ... A B C D E F G H I J K L M N O P Q R S T U V W X Y Z Iowa Center for Gene Therapy

  10. Browse by Discipline -- E-print Network Subject Pathways: Computer...

    Office of Scientific and Technical Information (OSTI)

    ... Adrian - School of Operations Research and Industrial Engineering) - School of Operations Research and Industrial Engineering, Cornell University Ley, Olivier (Olivier Ley) - ...

  11. Browse by Discipline -- E-print Network Subject Pathways: --...

    Office of Scientific and Technical Information (OSTI)

    of North Carolina at Greensboro Kalejta, Rob (Rob Kalejta) - McArdle Laboratory for Cancer , University of Wisconsin at Madison Kalil, Ronald E. (Ronald E. Kalil) - Neuroscience ...

  12. Browse by Discipline -- E-print Network Subject Pathways: --...

    Office of Scientific and Technical Information (OSTI)

    of Neurobiology, Weizmann Institute of Science Ullman, Katie (Katie Ullman) - Huntsman Cancer Institute, University of Utah Ullmann, G. Matthias (G. Matthias Ullmann) - Lehrstuhl ...

  13. Browse by Discipline -- E-print Network Subject Pathways: Fossil...

    Office of Scientific and Technical Information (OSTI)

    York University Roder, Heinrich (Heinrich Roder) - Basic Science Division, Fox Chase Cancer Center Rosenberg, Noah (Noah Rosenberg) - Department of Biology, Stanford University. ...

  14. Browse by Discipline -- E-print Network Subject Pathways: Fossil...

    Office of Scientific and Technical Information (OSTI)

    and Computational Biology, National Cancer Institute Levitt, Michael (Michael ... (Xiaole Shirley Liu) - Dana-Farber Cancer Institute & Department of Biostatistics, ...

  15. Browse by Discipline -- E-print Network Subject Pathways: --...

    Office of Scientific and Technical Information (OSTI)

    Biological Sciences, Virginia Tech Xiong, Yue (Yue Xiong) - Lineberger Comprehensive Cancer Center & Department of Biochemistry and Biophysics, University of North Carolina at ...

  16. Browse by Discipline -- E-print Network Subject Pathways: Geosciences...

    Office of Scientific and Technical Information (OSTI)

    Alexander (Alexander Wlodawer) - Macromolecular Crystallography Laboratory, National Cancer Institute Wolf, Martin (Martin Wolf) - Fachbereich Physik, Freie Universitt Berlin ...

  17. Browse by Discipline -- E-print Network Subject Pathways: Fossil...

    Office of Scientific and Technical Information (OSTI)

    University of California, Davis Henikoff, Steven (Steven Henikoff) - Fred Hutchinson Cancer Research Center Higuchi, Tomoyuki (Tomoyuki Higuchi) - Institute of Statistical ...

  18. Browse by Discipline -- E-print Network Subject Pathways: Fossil...

    Office of Scientific and Technical Information (OSTI)

    (Thomas D. Schneider) - Laboratory of Experimental and Computational Biology, National Cancer Institute Scott, Matthew (Matthew Scott) - Departments of Developmental Biology, ...

  19. Browse by Discipline -- E-print Network Subject Pathways: --...

    Office of Scientific and Technical Information (OSTI)

    ... of London Ramos, Joe W. (Joe W. Ramos) - Cancer Research Center of Hawai'i, University of ... Basic Sciences Division, Fred Hutchinson Cancer Research Center Roberts, Larry (Larry ...

  20. Browse by Discipline -- E-print Network Subject Pathways: --...

    Office of Scientific and Technical Information (OSTI)

    ... Dallan (Dallan Young) - Southern Alberta Cancer Research Institute & Department of ... "GC" (Guo-Cheng "GC" Yuan) - Dana-Farber Cancer Institute, Harvard University Yuan, ...

  1. Browse by Discipline -- E-print Network Subject Pathways: --...

    Office of Scientific and Technical Information (OSTI)

    ... Crystallography Laboratory, National Cancer Institute Waxman, David J. (David J. ... Crystallography Laboratory, National Cancer Institute Wohrer, Adrien (Adrien Wohrer) ...

  2. Browse by Discipline -- E-print Network Subject Pathways: Power...

    Office of Scientific and Technical Information (OSTI)

    P. (Stephen P. Yanoviak) - Department of Biology, University of Arkansas at Little Rock Yeager, Kevin M. (Kevin M. Yeager) - Department of Marine Science, University of ...

  3. Browse by Discipline -- E-print Network Subject Pathways: Biology...

    Office of Scientific and Technical Information (OSTI)

    A B C D E F G H I J K L M N O P Q R S T U V W X Y Z Colorado School of Mines, Department of Geophysics, Center for Rock Abuse Colorado School of Mines. Department of Geophysics, ...

  4. http://www.energy.gov/print/6310.htm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    submittal of a license application (LA) to the U.S. Nuclear Regulatory Commission (NRC) seeking authorization to construct America's first repository for spent nuclear fuel...

  5. DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    rig. This Technical Specification defines the technical requirement for the design, manufacture, supply and delivery of a Large Seal Test Rig for that purpose. IDM UID R7WQNK...

  6. PSA Vol 1 Tables Revised Ver 2 Print.xls

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    2005 (Thousand Barrels) East Coast Appalachian No. 1 Total IN, IL, KY MN, WI, ND, SD OK, KS, MO Total Liquefied Refinery Gases 14,825 298 15,123 33,928 1,840 2,446 38,214...

  7. PSA Vol 1 Tables Revised Ver 2 Print.xls

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    2005 (Thousand Barrels) East Coast Appalachian No. 1 Total IN, IL, KY MN, WI, ND, SD OK, KS, MO Total Natural Gas Liquids 359 5,914 6,273 26,874 4,786 77,174 108,834 Pentanes...

  8. PSA Vol 1 Tables Revised Ver 2 Print.xls

    Gasoline and Diesel Fuel Update (EIA)

    Refining Districts, 2005 East Coast Appalachian No. 1 Total IN, IL, KY MN, WI, ND, SD OK, KS, MO Total Liquefied Refinery Gases 2.5 0.9 2.4 4.2 1.2 0.9 3.1 Finished Motor...

  9. PSA Vol 1 Tables Revised Ver 2 Print.xls

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    14,213 14,346 47,564 2,344 21,862 100,329 Tank Farms and Pipelines (Includes Cushing, OK) 762 54,265 111,331 10,723 23,497 200,578 Cushing, Oklahoma - 21,777 - - - - Leases 44...

  10. PSA Vol 1 Tables Revised Ver 2 Print.xls

    Gasoline and Diesel Fuel Update (EIA)

    2005 (Thousand Barrels) East Coast Appalachian No. 1 Total IN, IL, KY MN, WI, ND, SD OK, KS, MO Total Total Net Input 199,173 1,285 200,458 117,409 24,041 20,032 161,482...

  11. Browse by Discipline -- E-print Network Subject Pathways: Power...

    Office of Scientific and Technical Information (OSTI)

    ... - School of Biology and Psychology, University of Newcastle upon Tyne Snell-Rood, Emilie C. (Emilie C. Snell-Rood) - Department of Ecology, Evolution, and Behavior, University of ...

  12. Browse by Discipline -- E-print Network Subject Pathways: --...

    Office of Scientific and Technical Information (OSTI)

    ... Biology, Albert Einstein College of Medicine, Yeshiva University Snell-Rood, Emilie C. (Emilie C. Snell-Rood) - Department of Ecology, Evolution, and Behavior, University of ...

  13. Polarized X-Rays Reveal Molecular Alignment in Printed Electronics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... These discoveries are valuable in guiding the molecular design of improved polymers for transistors and in gaining a better understanding of charge generation at complex 3D ...

  14. Browse by Discipline -- E-print Network Subject Pathways: --...

    Office of Scientific and Technical Information (OSTI)

    ... F. Elena) - Instituto de Biologa Molecular y Celular de Plantas, Universitat ... - Departments of Philosophy & Systems Design Engineering, University of Waterloo ...

  15. Browse by Discipline -- E-print Network Subject Pathways: Engineering...

    Office of Scientific and Technical Information (OSTI)

    Callen, James D. (James D. Callen) - Department of Engineering Physics, University of Wisconsin at Madison Carter, Troy (Troy Carter) - Department of Physics and Astronomy, ...

  16. Browse by Discipline -- E-print Network Subject Pathways: Engineering...

    Office of Scientific and Technical Information (OSTI)

    Fajans, Joel (Joel Fajans) - Department of Physics, University of California at Berkeley ... J.(Nathaniel J.Fisch).- Princeton Plasma Physics Laboratory & Department of Astrophysical ...

  17. Browse by Discipline -- E-print Network Subject Pathways: Chemistry...

    Office of Scientific and Technical Information (OSTI)

    Chen (Chen Yang) - Departments of Chemistry & Physics, Purdue University Yang, De-Ping (De-Ping Yang) - Department of Physics, College of the Holy Cross Yang, In-Sang (In-Sang ...

  18. Browse by Discipline -- E-print Network Subject Pathways: Engineering...

    Office of Scientific and Technical Information (OSTI)

    Kaganovich, Igor (Igor Kaganovich) - Princeton Plasma Physics Laboratory Karney, Charles (Charles Karney) - Princeton Plasma Physics Laboratory Kroupp, Eyal (Eyal Kroupp) - ...

  19. Browse by Discipline -- E-print Network Subject Pathways: Engineering...

    Office of Scientific and Technical Information (OSTI)

    Dennis L. (Dennis L. Eggleston) - Physics Department, Occidental College Go back to ... Eindhoven, Technische Universiteit - Department of Applied Physics, Elementary Processes ...

  20. Browse by Discipline -- E-print Network Subject Pathways: Engineering...

    Office of Scientific and Technical Information (OSTI)

    Zakharov, Leonid E. (Leonid E. Zakharov) - Princeton Plasma Physics Laboratory Zarnitsky, Yuri (Yuri Zarnitsky) - Department of Particle Physics, Weizmann Institute of Science ...

  1. Browse by Discipline -- E-print Network Subject Pathways: Engineering...

    Office of Scientific and Technical Information (OSTI)

    Lathrop, Daniel P. (Daniel P. Lathrop) - Institute for Research in Electronics and Applied Physics & Department of Physics, University of Maryland at College Park Learned, John ...

  2. Browse by Discipline -- E-print Network Subject Pathways: Engineering...

    Office of Scientific and Technical Information (OSTI)

    Kettering University Smolyakov, Andrei (Andrei Smolyakov) - Department of Physics and Engineering Physics, University of Saskatchewan Snipes, Joseph A. (Joseph A. Snipes) - Plasma ...

  3. Browse by Discipline -- E-print Network Subject Pathways: Engineering...

    Office of Scientific and Technical Information (OSTI)

    Jaun, Andr (Andr Jaun) - Division of Plasma Physics, Alfvn Laboratory, Royal Institute of Technology (KTH) Ji, Hantao (Hantao Ji) - Princeton Plasma Physics Laboratory Juric, ...

  4. Browse by Discipline -- E-print Network Subject Pathways: Engineering...

    Office of Scientific and Technical Information (OSTI)

    Hammett, Greg (Greg Hammett) - Princeton Plasma Physics Laboratory Harilal, Bindhu (Bindhu ... for Research in Electronics and Applied Physics, University of Maryland at College Park ...

  5. Browse by Discipline -- E-print Network Subject Pathways: Engineering...

    Office of Scientific and Technical Information (OSTI)

    Taskaev, Sergey Yur'evich (Sergey Yur'evich Taskaev) - Budker Institute of Nuclear Physics ... Thomas Jr., Edward (Edward Thomas Jr.) - Physics Department, Auburn University Tillack, ...

  6. Browse by Discipline -- E-print Network Subject Pathways: Engineering...

    Office of Scientific and Technical Information (OSTI)

    Waleffe, Fabian (Fabian Waleffe) - Department of Engineering Physics, University of Wisconsin at Madison Weingarten, Leonid (Leonid Weingarten) - Department of Particle Physics, ...

  7. Browse by Discipline -- E-print Network Subject Pathways: Energy...

    Office of Scientific and Technical Information (OSTI)

    E. (Sergio E. Ulloa) - Department of Physics and Astronomy, Ohio University Ulmer, Melville P. (Melville P. Ulmer) - Department of Physics and Astronomy, Northwestern University ...

  8. Browse by Discipline -- E-print Network Subject Pathways: Fission...

    Office of Scientific and Technical Information (OSTI)

    Maine, University of (University of Maine) - Department of Physics and Astronomy, Physics Education Research Laboratory Malament, David B. (David B. Malament) - ...

  9. Browse by Discipline -- E-print Network Subject Pathways: Engineering...

    Office of Scientific and Technical Information (OSTI)

    H. (Martha H. Redi) - Princeton Plasma Physics Laboratory Riedel, Kurt S.(Kurt ... for Research in Electronics and Applied Physics, University of Maryland at College Park ...

  10. Browse by Discipline -- E-print Network Subject Pathways: Engineering...

    Office of Scientific and Technical Information (OSTI)

    A B C D E F G H I J K L M N O P Q R S T U V W X Y Z Pohang University of Science and Technology, Department of Physics, Plasma Sheath Laboratory Princeton Plasma Physics Laboratory ...

  11. Browse by Discipline -- E-print Network Subject Pathways: Engineering...

    Office of Scientific and Technical Information (OSTI)

    (Dimitrios Vassiliadis) - Department of Physics, West Virginia University Vea, Damir (Damir Vea) - Department of Physics, University of Zagreb Vlad, Gregorio (Gregorio ...

  12. Browse by Discipline -- E-print Network Subject Pathways: Engineering...

    Office of Scientific and Technical Information (OSTI)

    of Theoretical Physics & Plasma Research Laboratory, Australian National University Diamond, Patrick H. (Patrick H. Diamond) - Department of Physics, University of ...

  13. Browse by Discipline -- E-print Network Subject Pathways: Engineering...

    Office of Scientific and Technical Information (OSTI)

    - Department of Applied Physics, California Institute of Technology Bernshtam, Vladimir (Vladimir Bernshtam) - Department of Particle Physics, Weizmann Institute of Science ...

  14. Browse by Discipline -- E-print Network Subject Pathways: Multidiscipl...

    Office of Scientific and Technical Information (OSTI)

    Allain) - Department of Chemistry and Physics, Southeastern Louisiana University Allen, ... (Lloyd Armstrong Jr.) - Department of Physics and Astronomy, University of Southern ...

  15. Browse by Discipline -- E-print Network Subject Pathways: Engineering...

    Office of Scientific and Technical Information (OSTI)

    Fusion Energy Experiments, P-24 Plasma Physics, Los Alamos National Laboratory Marchand, Richard (Richard Marchand) - Department of Physics, University of Alberta Marjoribanks, ...

  16. Browse Societies by Language -- E-print Network Societies by...

    Office of Scientific and Technical Information (OSTI)

    ... en - Weefselkweek Netherlands Society for Plant Biotechnology and Tissue Culture (NVPW) -- Nederlandse Vereniging voor Radiologie Radiological Society of the ...

  17. Browse by Discipline -- E-print Network Subject Pathways: Computer...

    Office of Scientific and Technical Information (OSTI)

    ... University of South Carolina, Lancaster Yip, Aaron Nung Kwan (Aaron Nung Kwan ... University of Western Ontario Yu, Qinglin Roger (Qinglin Roger Yu) - Mathematics and ...

  18. Browse by Discipline -- E-print Network Subject Pathways: Biotechnolog...

    Office of Scientific and Technical Information (OSTI)

    - Department of Environmental Science, Lancaster University Nakamura, Daisuke (Daisuke ... Biology, Harvard University Nielsen, Roger L. (Roger L. Nielsen) - College of Oceanic ...

  19. Browse by Discipline -- E-print Network Subject Pathways: Biotechnolog...

    Office of Scientific and Technical Information (OSTI)

    ... San Diego State University Bilham, Roger (Roger Bilham) - NOAA-CIRES & Department ... - Department of Environmental Science, Lancaster University Biondi, Biondo (Biondo ...

  20. Browse by Discipline -- E-print Network Subject Pathways: Environmenta...

    Office of Scientific and Technical Information (OSTI)

    Technology (CREST)- Renewable Energy Policy Project Columbia University - Waste-to-Energy Research and Technology Council (WTERT) Columbia University, Department of Earth ...