Powered by Deep Web Technologies
Note: This page contains sample records for the topic "jack wise mills" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

North and west central Texas. Mitchell EOR (enhanced oil recovery) projects yield tertiary oil in Wise and Jack counties  

SciTech Connect

An enhanced oil recovery project utilizing a miscible LPG process provides Mitchell Energy and Development Corp. engineers with a springboard for other miscible flood projects while yielding incremental tertiary oil that otherwise would remain in the ground. The LPG flood project is in the Alvord (3,000-ft Strawn) Unit in Wise County, Texas. The field had been waterflooded for 14 yr, and was producing near its economic limit under waterflood, the alternative to starting a tertiary project would have been to abandon the field. The LPG flood process was chosen because liquefied petroleum gases are miscible with oil at the low pressures that must be maintained in shallow reservoirs such as the Alvord Strawn. Propane was determined to be the suitable LPG for the project because of its availability and ease of handling.

Mickey, V.

1982-09-01T23:59:59.000Z

2

Jack Preses  

NLE Websites -- All DOE Office Websites (Extended Search)

Jack M. Preses Jack M. Preses Chemist Chemistry Department Building 555 Brookhaven National Laboratory P.O. Box 5000 Upton, NY 11973-5000 Phone: (631) 344-4371 FAX: (631) 344-5815 e-mail Thermal, Photo- and Radiation-Induced Reactions in Condensed Media Research Interests: Chemical uses of synchrotron radiation; combustion kinetics, isotope effects, gas-phase energy transfer, radiation chemistry Curriculum Vitae B.S., cum laude, Chemistry, Hofstra University, 1969 Ph.D. Chemistry, Columbia University, 1975 Research Collaborator, Chemistry Department, Brookhaven National Laboratory Research Associate, Chemistry Department, Yeshiva University Research Associate, Chemistry Department, Brookhaven National Laboratory, 5/76-4/78. Associate Chemist, Chemistry Department, Brookhaven National Laboratory,

3

NERSC Jack Deslippe  

NLE Websites -- All DOE Office Websites (Extended Search)

BerkeleyGW at BerkeleyGW at NERSC Jack Deslippe Part 1: Intro to GW/BSE DFT Kohn-Sham Formulation Minimize Energy Functional By Solving Kohn Sham Eqns Total energy is exact so long as approximation for V xc is good. Commonly use Local Density Approximation (LDA) and Gradient Approximations (GGA) - Hybrid functionals etc... Kohn, W.; Sham, L. J. Phys. Rev. A 1965, 140, 1133. Interpretation of KS Eigenvalues

4

Verti Jack Pumping Unit evaluation  

Science Conference Proceedings (OSTI)

The Verti Jack Pumping Unit was tested primarily to establish the energy comsumption efficiency of the unit as compared with that of conventional pumping unit. Before the unit was field tested, extensive static testing was performed to determine the effect of the counterbalance system throughout the operational cycle. The field test included comparing the performance of the Verti Jack Unit and conventional pump jacks - a Bethlehem 16 and Cabot 25 pumping unit. The Verti Jack unit was operated at four different pumping conditions. The Verti Jack unit peformed satisfactorily during the testing. Only minor problems that could not be attributed to the design or operation of the unit were encountered. Changing the stroke length was difficult in the field, but such operational problems were expected in operating the first phototype and can be corrected on future models. During the higher pumping rate tests of the Verti Jack unit, the well ceased to deliver fluid quantities at rates adequate to the pumping rate. These data are shown in table 8. Therefore, evaluation data are based on theoretical pump performance and are presented in table 9. The data show that the Verti Jack is more efficient than the conventional units tested. The most direct comparison was the Verti Jack test at 36-inch stroke and 12 1/2 strokes per minute versus the Cabot unit at 37-inch stroke and 12 strokes per minute. In the comparison the Verti Jack operated about 24 percent more efficiently than the Cabot unit. Comparing the summation of all Verti Jack tests with that of all conventional unit tests, the Verti Jack operated about 15 percent more efficiently. Compared to the Cabot unit only, the Verti Jack was about 17 percent more energy efficient. 13 figs., 12 tabs.

Porter, R.; Spence, K.

1985-11-01T23:59:59.000Z

5

SSA Old Jack Pine Site  

NLE Websites -- All DOE Office Websites (Extended Search)

SSA-OJP) SSA-OJP) View an aerial photo-map of the SSA-OJP site. The road to the OJP site The flux tower and the hut The truss tower connected to the flux tower by cables The flux tower< The canopy access tower The SRC meteorology tower The under-canopy flux station The moss-covered jack pine tree The ground cover at the OJP site Aerial view of the SSA-Old Jack Pine site looking to the northeast. The Flux Tower at SSA-Old Jack Pine site. The Sodar site. The NOAA sodar located near the Old Jack Pine in the SSA. The under-canopy radiation track This is a 14 meter-long metal track in the forest with a mobile radiometer out on an arm on a small motorized cart (visible at the center of the picture) that travels through the forest taking measurements of PAR and net radiation.

6

Climate Wise Boiler and Steam Efficiency Wise Rules  

E-Print Network (OSTI)

Climate Wise is an industrial energy efficiency program sponsored by the U.S. EPA, and supported by the U.S. DOE, working in partnership with more than 400 industrial companies. Many Climate Wise Partners are evaluating or implementing boiler and steam system efficiency measures and have requested assistance in quickly estimating the impacts of these projects through the Wise Line. Climate Wise has developed the Wise Rules for Industrial Efficiency (Wise Rules Tool Kit) to provide companies with simple rules of thumb, or Wise Rules, for estimating potential energy, cost, and greenhouse gas emissions savings from key industrial energy efficiency measures for a broad range of end uses, including boilers and steam systems. This paper presents excerpts from the Wise Rules Tool Kit on boiler and steam system efficiency measures.

Milmoe, P. H.; Winkelman, S. R.

1998-04-01T23:59:59.000Z

7

Better Buildings Neighborhood Program: NOLA Wise  

NLE Websites -- All DOE Office Websites (Extended Search)

NOLA Wise on Twitter Bookmark Better Buildings Neighborhood Program: NOLA Wise on Google Bookmark Better Buildings Neighborhood Program: NOLA Wise on Delicious Rank Better...

8

Estimating Energy Efficiency Impacts Using Climate Wise "Wise Rules"  

E-Print Network (OSTI)

Climate Wise is an industrial energy efficiency program sponsored by the U.S. EPA, and supported by the U.S. DOE, working in partnership with more than 400 industrial companies, representing approximately than 11 percent of U.S. industrial energy use. Climate Wise provides technical assistance in the form of efficiency check-lists, handbooks, and one-on-one support through a toll-free Wise Line to help partners identify efficiency measures and quantify project impacts. Climate Wise has developed the Wise Rules for Industrial Efficiency (Wise Rules Tool Kit) to provide partners with ''Wise Rules" for estimating potential energy, cost, and greenhouse gas emissions savings from key industrial energy efficiency measures. The Tool Kit includes information on the following end-uses: boilers, steam systems, furnaces, process heating, waste heat recovery, cogeneration, compressed air systems, and process cooling. This paper provides an overview of the Wise Rules Tool Kit and presents excerpts from the document and sample Wise Rules.

Milmoe, P. H.; Winkelman, S. R.

1998-04-01T23:59:59.000Z

9

GridWise Alliance | Open Energy Information  

Open Energy Info (EERE)

GridWise Alliance Jump to: navigation, search Name GridWise Alliance Place Washington, DC Zip 20005 Product String representation "The GridWise Al ... to key issues." is too long....

10

: H. Jack Elackwell, Area Manager, LAAO DATE:  

Office of Legacy Management (LM)

O.&E b.&AORANDti l > : H. Jack Elackwell, Area Manager, LAAO DATE: June 5, 1973 70 : ?ZH-Division Leader ,WE,T : ENVIRONMENTAL RADIOACTIVITY SURVEY OF LOS ALAMOS COMIMUNITY...

11

Jack Deslippe! NERSC User Services Group  

NLE Websites -- All DOE Office Websites (Extended Search)

& Jack Deslippe NERSC User Services Group Using Python on Hopper, Carver and Edison --- 1 --- February 1 5, 2 013 Python up to 2.7.2 * All---in---one i nstalla7on a...

12

Happy Jack Wind Farm | Open Energy Information  

Open Energy Info (EERE)

Happy Jack Wind Farm Happy Jack Wind Farm Jump to: navigation, search Name Happy Jack Wind Farm Facility Happy Jack Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service Owner Duke Energy Carolinas LLC Developer Duke Energy Carolinas LLC Energy Purchaser Cheyenne Light Fuel & Power Location Near Cheyenne WY Coordinates 41.137532°, -104.994929° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":41.137532,"lon":-104.994929,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

13

Hit the Road, Jack! New Thermal Window Technology Lessens Menace of Jack  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Hit the Road, Jack! New Thermal Window Technology Lessens Menace of Hit the Road, Jack! New Thermal Window Technology Lessens Menace of Jack Frost Hit the Road, Jack! New Thermal Window Technology Lessens Menace of Jack Frost January 17, 2012 - 4:25pm Addthis The frost patterns on your window might be pretty, but they're not helping you save any energy. Energy efficient windows provide an effective barrier from inclement weather. | Photo courtesy of Callie Reed. The frost patterns on your window might be pretty, but they're not helping you save any energy. Energy efficient windows provide an effective barrier from inclement weather. | Photo courtesy of Callie Reed. Roland Risser Roland Risser Program Director, Building Technologies Office

14

Jack Fellows to Direct Climate Change Science Institute at Oak...  

NLE Websites -- All DOE Office Websites (Extended Search)

Dawn Levy 865.241.4630 Jack Fellows to Direct Climate Change Science Institute at Oak Ridge National Laboratory Jack Fellows has been appointed director of the Climate Change...

15

HIGH PERFORMANCE COMPUTING TODAY Jack Dongarra  

E-Print Network (OSTI)

1 HIGH PERFORMANCE COMPUTING TODAY Jack Dongarra Computer Science Department, University detailed and well-founded analysis of the state of high performance computing. This paper summarizes some of systems available for performing grid based computing. Keywords High performance computing, Parallel

Dongarra, Jack

16

Evan Mills  

NLE Websites -- All DOE Office Websites (Extended Search)

Evan Mills Evan Mills Residential Building Systems Group Lawrence Berkeley National Laboratory 1 Cyclotron Road MS 90R2000 Berkeley CA 94720 Office Location: 90-2058 (510) 486-6784...

17

Corn Milling  

Science Conference Proceedings (OSTI)

... facilities include processing and storage tanks, screening and sizing equipment, grind mills, high pressure steam boilers, centrifuges, rotary ...

18

Advanced Workflows Jack Deslippe and Zhengji Zhao  

NLE Websites -- All DOE Office Websites (Extended Search)

Scripting for Scripting for Advanced Workflows Jack Deslippe and Zhengji Zhao Presentation URL: http://goo.gl/s6M8x Outline ● Scripting basics ● Shell scripting examples for launching multiple MPI jobs ● Chaining jobs ● Managing multiple serial jobs on Hopper and Carver Presentation URL: http://goo.gl/s6M8x Scripting Basics Scripting is a rich and deep topic and can refer to any of the following: SHELL (BASH, CSH ...)

19

Jack Steinberger and the Muon-Neutrino  

Office of Scientific and Technical Information (OSTI)

Jack Steinberger and the Muon-Neutrino Resources with Additional Information Jack Steinberger Photograph by Harry Sticker, courtesy AIP Emilio Segre Visual Archives, Physics Today Collection In an interview, Jack Steinberger spoke about his 1988 Nobel Prize winning research. He states "I did an experiment, together with several other people at Brookhaven National Laboratory ... which showed that there is a second kind of neutrino. The neutrino has elementary particles. Elementary particles exist in families of particles ... . At the time, the elementary particles which were involved were the electrons and the neutrino. ... [W]e required the [BNL] accelerator, which was the effort of very many people, ... and this allowed [us] to make a beam of these neutrinos, and we were able to convince ourselves that these neutrinos were not the same kind of neutrinos as those which had been seen before. They were associated with not electrons, but with something called [muons]. So we were able to understand that there is a different neutrino associated with the [muon] than with the electron.

20

Cassie Mills  

Energy.gov (U.S. Department of Energy (DOE))

Cassie Mills is acommunications associate in the Advanced Manufacturing Office in the Office of Energy Efficiency and Renewable Energy.

Note: This page contains sample records for the topic "jack wise mills" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Climate wise case study compendium: Report 1  

SciTech Connect

This case study compendium is one of several Climate Wise tools available to help interested companies identify cost-effective options. Climate Wise, a private-public partnership program, is a key Federal initiative to return greenhouse gas emissions to 1990 levels by 2000.

NONE

1997-02-01T23:59:59.000Z

22

World Wise Technologies Inc | Open Energy Information  

Open Energy Info (EERE)

Technologies Inc Technologies Inc Jump to: navigation, search Name World Wise Technologies Inc Place Carson City, Nevada Zip 89701 Sector Renewable Energy Product Develops renewable energy technologies and applies it to new generation electrical power systems. Patented technologies to produce green power generating plants and applications. References World Wise Technologies Inc[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. World Wise Technologies Inc is a company located in Carson City, Nevada . References ↑ "World Wise Technologies Inc" Retrieved from "http://en.openei.org/w/index.php?title=World_Wise_Technologies_Inc&oldid=353164" Categories: Clean Energy Organizations

23

PNNL GridWise | Open Energy Information  

Open Energy Info (EERE)

GridWise GridWise (Redirected from GridWise) Jump to: navigation, search Logo: GridWise Name GridWise Agency/Company /Organization Pacific Northwest National Laboratory Sector Energy Resource Type Case studies/examples Website http://gridwise.pnl.gov/ Country United States Northern America References Gridwise Vision[1] Contents 1 Overview 2 Highlights 3 Notes 4 References Overview This is a case study of two year-long demonstration projects that tested demand-response concepts. The Grid Friendly Appliance Project demonstrated how household appliances can reduce energy consumption at critical moments when they are fitted with controllers that sense stress on the grid. The Olympic Peninsula Project found that homeowners are willing to adjust their energy use based on price signals provided via information technology

24

Decatur - DecaturWISE Residential Energy Efficiency Rebate Program...  

Open Energy Info (EERE)

Summary The City of Decatur, through the DecaturWISE program, offers rebates to homeowners who make energy efficient upgrades to participating residences. DecaturWISE rebates...

25

City of New Orleans - NOLA Wise Energy Efficiency Loan Program...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NOLA Wise Energy Efficiency Loan Program (Louisiana) City of New Orleans - NOLA Wise Energy Efficiency Loan Program (Louisiana) Eligibility Commercial Multi-Family Residential...

26

Evan Mills  

NLE Websites -- All DOE Office Websites (Extended Search)

Evan Mills Evan Mills Evan Mills Residential Building Systems Group Lawrence Berkeley National Laboratory 1 Cyclotron Road MS 90R2000 Berkeley CA 94720 Office Location: 90-2058 (510) 486-6784 EMills@lbl.gov Evan Mills is a Staff Scientist in the Building Technology and Urban Systems Department, and has worked in the energy efficiency field since 1982. His core commercial-buildings expertise is in energy benchmarking, commissioning, high-tech buildings, risk management, and the efficiency business case. He is a frequent speaker to academic and industry audiences on buildings energy efficiency, author of over 200 publications, and member of the Intergovernmental Panel on Climate Change, which shared the 2007 Nobel Peace Prize. He is recipient of an R&D 100 award for commercializing

27

Andrew Mills  

NLE Websites -- All DOE Office Websites (Extended Search)

Andrew D. Mills Andrew D. Mills Andrew Mills Electricity Markets and Policy Group Lawrence Berkeley National Laboratory 1 Cyclotron Road MS 90R4000 Berkeley CA 94720 Office Location: 90-4126J (510) 486-4059 ADMills@lbl.gov Andrew D. Mills is a Principal Research Associate in the Electricity Markets and Policy Group at Lawrence Berkeley National Laboratory. Andrew conducts research and provides policy analysis on renewables and transmission, including power system operations and valuation of wind and solar. Andrew's has published his research in Energy Policy and was a contributing author to the IPCC Special Report on Renewable Energy. Previously, Andrew worked with All Cell Technologies, a battery technologystart-up company. Andrew has an M.S. in Energy and Resources from UC Berkeley and a B.S. in

28

J. E. "Jack" Surash, P.E. | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Los Angeles African American Chamber of Commerce, and also the U.S. Department of Energy Fiscal Year 2010 Secretarial Small Business Award. Jack holds a Bachelor of Science...

29

PNNL GridWise | Open Energy Information  

Open Energy Info (EERE)

GridWise GridWise Jump to: navigation, search Logo: GridWise Name GridWise Agency/Company /Organization Pacific Northwest National Laboratory Sector Energy Resource Type Case studies/examples Website http://gridwise.pnl.gov/ Country United States Northern America References Gridwise Vision[1] Contents 1 Overview 2 Highlights 3 Notes 4 References Overview This is a case study of two year-long demonstration projects that tested demand-response concepts. The Grid Friendly Appliance Project demonstrated how household appliances can reduce energy consumption at critical moments when they are fitted with controllers that sense stress on the grid. The Olympic Peninsula Project found that homeowners are willing to adjust their energy use based on price signals provided via information technology

30

CONSTRUCTING A WISE HIGH RESOLUTION GALAXY ATLAS  

Science Conference Proceedings (OSTI)

After eight months of continuous observations, the Wide-field Infrared Survey Explorer (WISE) mapped the entire sky at 3.4 {mu}m, 4.6 {mu}m, 12 {mu}m, and 22 {mu}m. We have begun a dedicated WISE High Resolution Galaxy Atlas project to fully characterize large, nearby galaxies and produce a legacy image atlas and source catalog. Here we summarize the deconvolution techniques used to significantly improve the spatial resolution of WISE imaging, specifically designed to study the internal anatomy of nearby galaxies. As a case study, we present results for the galaxy NGC 1566, comparing the WISE enhanced-resolution image processing to that of Spitzer, Galaxy Evolution Explorer, and ground-based imaging. This is the first paper in a two-part series; results for a larger sample of nearby galaxies are presented in the second paper.

Jarrett, T. H.; Masci, F.; Tsai, C. W.; Fowler, J. [Infrared Processing and Analysis Center (IPAC), California Institute of Technology, Pasadena, CA 91125 (United States); Petty, S.; Lake, S.; Wright, E. [Physics and Astronomy Department, University of California, Los Angeles, CA 90095 (United States); Cluver, M. [Australian Astronomical Observatory, P.O. Box 296, Epping, NSW 1710 (Australia); Assef, Roberto J.; Eisenhardt, P. [Jet Propulsion Laboratory, California Institute of Technology, 4800 Oak Grove Drive, Mail Stop 169-221, Pasadena, CA 91109 (United States); Benford, D. [NASA Goddard Space Flight Center, Code 665, Greenbelt, MD 20771 (United States); Blain, A. [Department of Physics and Astronomy, University of Leicester, LE1 7RH Leicester (United Kingdom); Bridge, C.; Neill, James D. [Department of Astronomy, California Institute of Technology, Pasadena, CA 91125 (United States); Donoso, E. [Spitzer Science Center, IPAC, California Institute of Technology, Pasadena, CA 91125 (United States); Koribalski, B. [CSIRO Astronomy and Space Science, Australia Telescope National Facility (ATNF), P.O. Box 76, Epping, NSW 1710 (Australia); Seibert, M. [Observatories of the Carnegie Insititution for Science, 813 Santa Barbara Street, Pasadena, CA 91101 (United States); Sheth, K. [NASA Postdoctoral Program Fellow. (United States); Stanford, S., E-mail: jarrett@ipac.caltech.edu [Department of Physics, University of California, One Shields Avenue, Davis, CA 95616 (United States)

2012-08-15T23:59:59.000Z

31

GridWise Standards Mapping Overview  

DOE Green Energy (OSTI)

''GridWise'' is a concept of how advanced communications, information and controls technology can transform the nation's energy system--across the spectrum of large scale, central generation to common consumer appliances and equipment--into a collaborative network, rich in the exchange of decision making information and an abundance of market-based opportunities (Widergren and Bosquet 2003) accompanying the electric transmission and distribution system fully into the information and telecommunication age. This report summarizes a broad review of standards efforts which are related to GridWise--those which could ultimately contribute significantly to advancements toward the GridWise vision, or those which represent today's current technological basis upon which this vision must build.

Bosquet, Mia L.

2004-04-01T23:59:59.000Z

32

JACK: a tool for validation of security and behaviour of Java applications  

Science Conference Proceedings (OSTI)

We describe the main features of JACK (Java Applet Correctness Kit), a tool for the validation of Java applications, annotated with JML specifications. JACK has been especially designed to improve the quality of trusted personal device applications. ...

Gilles Barthe; Lilian Burdy; Julien Charles; Benjamin Grgoire; Marieke Huisman; Jean-Louis Lanet; Mariela Pavlova; Antoine Requet

2006-11-01T23:59:59.000Z

33

Motorola's Experience in the Climate Wise Program  

E-Print Network (OSTI)

In 1996, Motorola's Austin, Texas semiconductor manufacturing sites joined EPA's Climate Wise program, a voluntary effort that encourages U.S. industry to take advantage of the environmental and economic benefits associated with energy efficiency improvements. As the first Climate Wise partner in Austin, Motorola teamed up with the City of Austin to recruit other large employers in the Austin area for the program. There are now over twenty partners in the Austin area, all of who have developed plans and have committed to energy conservation projects. At Motorola, a wide variety of resource reduction and pollution prevention projects at the two Austin facilities have already demonstrated solid bottom-line results. Although many of these projects are extensions of ongoing environmental and facilities programs, incorporating the energy, emissions reduction, and resource conservation projects into a single program has had significant benefits. This paper describes Motorola's Climate Wise experiences to-date, and offers suggestions to others new to the program or considering joining, on the topics such as the following: establishing a formal Climate Wise program at the site level; tracking and/or calculating results; maintaining interest and activity levels; integrating projects into a single program; and, partnering with other local industry participants.

Montemayor-Rapier, M.; Gibson, S.; Nasi, T.

1998-04-01T23:59:59.000Z

34

Test-Wiseness Training: An Investigation of the Impact of Test-Wiseness in an Employment Setting.  

E-Print Network (OSTI)

??The current study examined ethnic group differences in test-wiseness and the extent to which test-wiseness training may eliminate these differences in a sample of 87 (more)

Houston, Susan Elizabeth

2005-01-01T23:59:59.000Z

35

Wind field estimation for autonomous dynamic soaring Jack W. Langelaan  

E-Print Network (OSTI)

Wind field estimation for autonomous dynamic soaring Jack W. Langelaan Aerospace Engineering, Penn for distributed parameter estimation of a previously unknown wind field is described. The application is dynamic parameterization of the wind field is used, allowing implementation of a linear Kalman filter for parameter

Spletzer, John R.

36

Gravity base, jack-up platform - method and apparatus  

SciTech Connect

The invention relates to an offshore, gravity base, jack-up platform comprising a deck, a gravity base and one or more legs interconnecting the deck and base. The gravity base comprises a generally polygonal shaped, monolithic hull structure with reaction members extending downwardly from the hull to penetrate the waterbed and react to vertical and lateral loads imposed upon the platform while maintaining the gravity hull in a posture elevated above the surface of the waterbed. A method aspect of the invention includes the steps of towing a gravity base, jack-up platform, as a unit, to a preselected offshore site floating upon the gravity hull. During the towing operation, the deck is mounted adjacent the gravity base with a leg or legs projecting through the deck. At a preselected offshore station ballast is added to the gravity base and the platform descends slightly to a posture where the platform is buoyantly supported by the deck. The base is then jacked down toward the seabed and the platform is laterally brought onto station. Ballast is then added to the deck and the reaction members are penetrated into the waterbed to operational soil refusal. Ballast is then ejected from the deck and the deck is jacked to an operational elevation above a predetermined statistical wave crest height.

Herrmann, R.P.; Pease, F.T.; Ray, D.R.

1981-05-05T23:59:59.000Z

37

Cargill Corn Milling North America  

Science Conference Proceedings (OSTI)

... Manufacturing. Cargill Corn Milling North America. Cargill employees (Photo courtesy of Cargill Corn Milling North America). ...

2010-11-23T23:59:59.000Z

38

Mr. Jack W. Anderson Chief Operating Officer Fermilab  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Jack W. Anderson Jack W. Anderson Chief Operating Officer Fermilab P.O. Box 500 Batavia, IL 60510 Dear Mr. Anderson: SUBJECT: NATIONAL ENVIRONMENTAL POLICY ACT (NEPA) DETERMINATION AT i FERMI NATIONAL ACCELERATOR LABORATORY (FERMILAB) - HYDROSTATIC RELIEF ACTION AT THE NEUTRINOS AT THE MAIN INJECTOR (NUMI) Reference: Letter, from J. Anderson to M. Weis, dated January 16, 2013, Subject: NEPA Environmental Evaluation Notification Form (EENF) for the Hydrostatic Relief Action at NuMI have reviewed the Fermilab EENF for the Hydrostatic Relief Action at NuMI. Based on the information provided in the EENF, I have approved the following categorical exclusion (CX): Project Name Approved CX Hydrostatic Relief Action at NuMI 1/76/2013 B2.5 am returning a signed copy of the EENF for your records. No further NEPA review is required.

39

WISE Home Energy Program (Alabama) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

The WISE Home Energy Program provides up to 750 in energy efficiency rebates for homeowners in Cullman, Madison, Jefferson, Shelby, Morgan, Limestone and Lawrence counties. A...

40

Building Energy Software Tools Directory: WegoWise  

NLE Websites -- All DOE Office Websites (Extended Search)

of the cost of traditional techniques. Weaknesses WegoWise does not connect directly to BASEMS systemsthe platforms core model relies on utility bill data. With most...

Note: This page contains sample records for the topic "jack wise mills" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Milling Techniques - TMS  

Science Conference Proceedings (OSTI)

February 4-8 1996 TMS ANNUAL MEETING Anaheim, California. SYNTHESIS AND PROCESSING OF NANOCRYSTALLINE POWDER III: Milling Techniques...

42

Lithium in Jack Hills zircons: Evidence for extensive weathering of Earth's earliest crust Takayuki Ushikubo a,  

E-Print Network (OSTI)

Lithium in Jack Hills zircons: Evidence for extensive weathering of Earth's earliest crust Takayuki Hills lithium weathering continental crust Hadean In situ Li analyses of 4348 to 3362 Ma detrital of REEs. The Jack Hills zircons also have fractionated lithium isotope ratios (7 Li=-19 to+13) about five

Mcdonough, William F.

43

J. E. "Jack" Surash, P.E. | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

J. E. "Jack" Surash, P.E. J. E. "Jack" Surash, P.E. About Us J. E. "Jack" Surash, P.E. - Deputy Assistant Secretary for Acquisition & Project Management for Environmental Management Photo of Jack Surash Mr. J. E. "Jack" Surash is currently the Deputy Assistant Secretary (DAS) for Acquisition and Project Management. He is responsible for developing and implementing site and project specific acquisition and contract strategies, and for overseeing placement and execution of all Office of Environmental Management (EM) contracts in the Field. He is also the EM Head of Contracting Activity (HCA) and is responsible for effective and efficient operation of the procurement and assistance functions within EM, and compliance with pertinent statutes, regulation,

44

GridWise Alliance: Smart Grid RFI: Addressing Policy and Logistical...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

GridWise Alliance: Smart Grid RFI: Addressing Policy and Logistical Challenges GridWise Alliance: Smart Grid RFI: Addressing Policy and Logistical Challenges The GridWise Alliance...

45

SCE&G (Gas) - Residential EnergyWise Program | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

SCE&G (Gas) - Residential EnergyWise Program SCE&G (Gas) - Residential EnergyWise Program Eligibility Residential Savings For Heating & Cooling Commercial Heating & Cooling Heating...

46

U-115: Novell GroupWise Client Address Book Processing Buffer...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Other Agencies You are here Home U-115: Novell GroupWise Client Address Book Processing Buffer Overflow Vulnerability U-115: Novell GroupWise Client Address Book...

47

U-261: Novell GroupWise Internet Agent "Content-Length" Integer...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1: Novell GroupWise Internet Agent "Content-Length" Integer Overflow Vulnerability U-261: Novell GroupWise Internet Agent "Content-Length" Integer Overflow Vulnerability September...

48

City of Charleston- CharlestonWISE Program (South Carolina)  

Energy.gov (U.S. Department of Energy (DOE))

CharlestonWISE is an energy efficiency program for homeowners within the City of Charleston. The program offers up to $500 in instant rebates on completed home performance improvements for...

49

City of Charleston - CharlestonWISE Program (South Carolina)...  

Open Energy Info (EERE)

tiveCodeSC56F&re1&ee1 Summary CharlestonWISE is an energy efficiency program for homeowners within the City of Charleston. The program offers up to 500 in instant rebates on...

50

AlabamaWISE Home Energy Program (Alabama) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

AlabamaWISE Home Energy Program (Alabama) AlabamaWISE Home Energy Program (Alabama) AlabamaWISE Home Energy Program (Alabama) < Back Eligibility Residential Savings Category Home Weatherization Commercial Weatherization Sealing Your Home Heating & Cooling Construction Commercial Heating & Cooling Design & Remodeling Windows, Doors, & Skylights Ventilation Manufacturing Maximum Rebate $750 Program Info Funding Source The American Reinvestment and Recovery Act (ARRA) of 2009; Alabama Department of Economic and Community Affairs Start Date 01/01/2010 State Alabama Program Type Local Rebate Program The WISE Home Energy Program provides up to $750 in energy efficiency rebates for homeowners in Cullman, Madison, Jefferson, Shelby, Morgan, Limestone and Lawrence counties. A $350 rebate is available to homeowners

51

Mr. Jack W. Anderson Chief Operating Officer Fermilab  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

~' ~' Mr. Jack W. Anderson Chief Operating Officer Fermilab P.O. Box 500 Batavia, I L 60510 Dear Mr. Anderson: SUBJECT: NATIONAL ENVIRONMENTAL POLICY ACT (NEPA) DETERMINATION AT FERMI NATIONAL ACCELERATOR LABORATORY (FERMILAB) - SITEWIDE DOMESTIC WATER SERVICE (DWS) REPLACEMENT PROJECT Reference: Letter, J. Anderson to M. Weis, dated August 30, 2012, Subject: National Environmental Policy Act (NEPA) Environmental Evaluation Notification Form (EENF) for the Sitewide Domestic Water Service Replacement Project have reviewed the Fermilab EENF for the Sitewide Domestic Water Service Replacement Project. Based on the information provided in the EENF, I have approved the following categorical exclusion (CX): Protect Name Approved CX Sitewide DWS 9/04/2012 B1.3, 81.15 Replacement Project

52

Mr. Jack W. Anderson Chief Operating Officer Fermilab  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

~y ~y ,~ !l` ~; Mr. Jack W. Anderson Chief Operating Officer Fermilab P.O. Box 500 Batavia, IL 60510 Dear Mr. Anderson: SUBJECT: NATIONAL ENVIRONM ENTAL POLICY ACT (NEPA) DETERMIN ATION AT FERMI NATIONAL ACCELERA TOR LABORATO RY (FERMILAB ) - NORTHERN ILLINOIS CENTER FOR ACCELERA TOR AND DETECTOR DEVELOPM ENT (NICADD) EXTRUSIO N LINE FACILITY Reference: Letter, from J. Anderson to M. Weis, dated February 13, 2013, Subject: NEPA Environment al Evaluation Notification Form (EENF) for the NICADD Extrusion Line Facility have reviewed the Fermilab EENF for the NICADD Extrusion Line Facility. Based on the information provided in the EENF, I have approved the following categorical exclusion (CX): Project Name A~groved CX NICADD Extrusion Line Facility 2/20/2013 B1.15 am returning a signed copy of the EENF for your records. No further NEPA review is required.

53

Mr. Jack W. Anderson Chief Operating Officer Fermilab  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

A~ ~ ~ 2013 A~ ~ ~ 2013 Mr. Jack W. Anderson Chief Operating Officer Fermilab P.O. Box 500 Batavia, IL 60510 Dear Mr. Anderson: SUBJECT: NATIONAL ENVIRONMENTAL POLICY ACT (NEPA) DETERMINATION FOR' THE GEOTECHNICAL INVESTIGATION OF THE LONG BASELINE NEUTRINO EXPERIMENT (LBNE) DETECTOR SITE IN SOUTH DAKOTA Reference: Letter, from J. Anderson to M. Weis, dated March 21, 2013, Subject: NEPA Environmental Evaluation Notification Form (EENF) for the Geotechnical Investigation of the LBNE Detector Site in South Dakota have reviewed the EENF for the Geotechnical Investigation of the LBNE Detector Site in South Dakota. Based on the information provided in the EENF, I have approved the following categorical exclusion (CX): Protect Name Approved CX Geotechnical Investigation of the LBNE 3/27/2013 B3.1

54

Microsoft Word - CaptainJack_Olinda_CX_2012.docx  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

6, 2012 6, 2012 REPLY TO ATTN OF: KEC-4 SUBJECT: Environmental Clearance Memorandum Cynthia Rounds Project Manager- TPC Proposed Action: Captain Jack-Olinda RAS LLL/LT Replacement Project Categorical Exclusion Applied (from Subpart D, 10 C.F.R. Part 1021): B1.31 Installation or relocation of machinery and equipment Location: Olinda Substation, Shasta County, CA Proposed by: Bonneville Power Administration (BPA) Description of the Proposed Action: BPA proposes to fund upgrades to BPA equipment at the Transmission Agency of Northern California 500-kilovolt (kV) Olinda Substation (also known as Vic Fazio Substation), which is operated and maintained by Western Area Power Administration (Western). BPA would fund Western to relocate existing and install new

55

X013 Mr. Jack Anderson Chief Operating Officer Fermilab  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

JUI~ 0 ~ JUI~ 0 ~ X013 Mr. Jack Anderson Chief Operating Officer Fermilab P.O. Box 500 Batavia, IL 60510 Dear Mr. Anderson: SUBJECT: NATIONAL ENVIRONMENTAL POLICY ACT (NEPA) DETERMINATION AT FERMI NATIONAL ACCELERATOR LABORATORY (FERMILAB) - VARIOUS DEMOLITION JOBS 2013 Reference: Memorandum, from J. Anderson to M. Weis, dated May 28, 2013, Subject: National Environmental Policy Act (NEPA) Environmental Evaluation Notification Form (EENF) for Various Demolitions 2013 have reviewed the Fermilab EENF for the Various Demolition Jobs in 2013 that include 37-39 Shabbona, 31-33 Blackhawk, the Village Water Tower, Trailer 159, and the Site 50 T&M Barn and Building A. Based on the information provided in the EENF, I have approved the following categorical exclusion (CX):

56

Microsoft Word - CX-CaptainJack-MalinSpacers_WEB.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

KEPR-4 KEPR-4 SUBJECT: Environmental Clearance Memorandum Darrel Aaby Line Foreman III - TFRF-Redmond Proposed Action: Spacer-damper replacements on the Captain Jack-Malin 500-kV transmission line Budget Information: Work Order # 00189282 PP&A Project No.: 1856 Categorical Exclusion Applied (from Subpart D, 10 C.F.R. Part 1021): B1.3, Routine maintenance activities...for structures, rights-of-way, infrastructures such as roads, equipment...routine maintenance activities, corrective....are required to maintain... infrastructures...in a condition suitable for a facility to be used for its designed purpose. Location: The proposed project is located in Klamath County, Oregon, in the Redmond Region. Proposed by: Bonneville Power Administration (BPA)

57

V-082: Novell GroupWise Client Two Vulnerabilities | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2: Novell GroupWise Client Two Vulnerabilities 2: Novell GroupWise Client Two Vulnerabilities V-082: Novell GroupWise Client Two Vulnerabilities February 1, 2013 - 6:00am Addthis PROBLEM: Two vulnerabilities have been reported in Novell GroupWise Client PLATFORM: Novell GroupWise 2012 Novell GroupWise Client 2012 Novell GroupWise Client 8.x Novell GroupWise Server 8.x ABSTRACT: Two vulnerabilities have been reported in Novell GroupWise Client which can be exploited by malicious people to compromise a user's system. REFERENCE LINKS: Secunia Advisory SA52031 CVE-2012-0439 CVE-2013-0804 Novell KB 7011687 Novell KB 7011688 IMPACT ASSESSMENT: High DISCUSSION: The GroupWise Client for Windows is vulnerable to an ActiveX Control exploit where by enticing a target user to open a malicious file or visit a malicious page, a remote attacker could execute arbitrary code on

58

Jack Fellows to Direct Climate Change Science Institute at Oak Ridge  

NLE Websites -- All DOE Office Websites (Extended Search)

Dawn Levy Dawn Levy 865.241.4630 Jack Fellows to Direct Climate Change Science Institute at Oak Ridge National Laboratory Jack Fellows has been appointed director of the Climate Change Science Institute at Oak Ridge National Laboratory. Jack Fellows has been appointed director of the Climate Change Science Institute at Oak Ridge National Laboratory. (hi-res image) OAK RIDGE, Tenn., Oct. 21, 2013-Jack D. Fellows, who oversaw a $110 billion federal science portfolio under two U.S. presidents and co-founded the U.S. Global Change Research Program integrating all federal Earth system science research programs, has been appointed director of the Climate Change Science Institute at Oak Ridge National Laboratory. Martin Keller and Jeff Nichols, leaders of the Energy & Environmental Sciences

59

Wuhan ecoWise Co Ltd | Open Energy Information  

Open Energy Info (EERE)

ecoWise Co Ltd ecoWise Co Ltd Jump to: navigation, search Name Wuhan ecoWise Co Ltd Place Wuhan, Hubei Province, China Sector Biomass Product Wuhan-based biomass co-generation project developer. Coordinates 30.572399°, 114.279121° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":30.572399,"lon":114.279121,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

60

Detroit Public Lighting Department - Residential Energy Wise Program |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Detroit Public Lighting Department - Residential Energy Wise Detroit Public Lighting Department - Residential Energy Wise Program Detroit Public Lighting Department - Residential Energy Wise Program < Back Eligibility Low-Income Residential Multi-Family Residential Residential Savings Category Heating & Cooling Cooling Appliances & Electronics Commercial Lighting Lighting Program Info State Michigan Program Type Utility Rebate Program Rebate Amount CFLs: $2-$10 LED Task Light: $10.00 LED Night light: $1.25 Energy Star Ceiling Fan: $10 Provider Detroit Public Lighting Department The Detroit Public Lighting Department (PLD) offers residential customers rebates for energy efficient lights. In addition, low-income residential customers may qualify for free compact fluorescent lights (CFLs). Specific rebate amounts, equipment requirements, and applications are available on

Note: This page contains sample records for the topic "jack wise mills" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Wising Up Uncle Sam to Cybertricks | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Wising Up Uncle Sam to Cybertricks Wising Up Uncle Sam to Cybertricks Wising Up Uncle Sam to Cybertricks November 22, 2011 - 12:15pm Addthis Oak Ridge National Laboratory’s main entrance is marked by a limestone sign. Several new buildings visible in the background house more than 1,000 of the lab’s 4,300 employees. | Photo courtesy of Oak Ridge National Laboratory Oak Ridge National Laboratory's main entrance is marked by a limestone sign. Several new buildings visible in the background house more than 1,000 of the lab's 4,300 employees. | Photo courtesy of Oak Ridge National Laboratory Daniel B. Poneman Daniel B. Poneman Deputy Secretary of Energy "As in many arenas, security in cyberspace is not just a government imperative, it is a societal endeavor." Deputy Secretary of Energy Daniel B. Poneman

62

Oklahoma Municipal Power Authority - WISE Energy Efficiency Loan Program |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Oklahoma Municipal Power Authority - WISE Energy Efficiency Loan Oklahoma Municipal Power Authority - WISE Energy Efficiency Loan Program Oklahoma Municipal Power Authority - WISE Energy Efficiency Loan Program < Back Eligibility Commercial Residential Savings Category Home Weatherization Commercial Weatherization Sealing Your Home Heating & Cooling Cooling Commercial Heating & Cooling Design & Remodeling Windows, Doors, & Skylights Ventilation Manufacturing Heat Pumps Appliances & Electronics Commercial Lighting Lighting Insulation Water Heating Program Info Funding Source American Recovery and Reinvestment Act of 2009 State Oklahoma Program Type Utility Loan Program Rebate Amount Unsecured Loan: $5,000 - $35,000 Home Equity Loan: $1,000 - $100,000 Provider Oklahoma Municipal Power Authority The Oklahoma Municipal Power Authority (OMPA) offers loans for a variety of

63

"Invisible" Archaeological Deposits at Small Milling Sites  

E-Print Network (OSTI)

Deposits at Small Milling Sites ROBERT E. PARR and MARK Q.architechire, bedrock milling features, soil colorlithic scatters or bedrock milling stations), it appears

Parr, Robert E.; Sutton, Mark Q.

1991-01-01T23:59:59.000Z

64

Design of control system for hydraulic lifting platform with jack-up wind-power installation vessel  

Science Conference Proceedings (OSTI)

Jack-up wind-power installation vessel is the most important tool in construction of wind farm. And the control system for hydraulic lifting platform is the key point of jack-up wind-power installation vessel. Therefore the design of the control system ... Keywords: hydraulic control, hydraulic lifting platform, programmable logic controller, wind-power

Xuejin Yang; Dingfang Chen; Mingwang Dong; Taotao Li

2012-11-01T23:59:59.000Z

65

Yang-Mills redux  

E-Print Network (OSTI)

It is noted that a given pairing of the phase factor and gauge transformation to retain gauge symmetry is not unique. In their seminal paper, when Yang and Mills (YM) discuss the phase factor- gauge transformation relationship, they cite Paulis review paper. It is interesting that although Pauli in that paper presents the electromagnetic field strength in terms of a commutator, for whatever reason YM did not extrapolate the commutators use to obtain the Yang-Mills field strength they obtained it by trial and error. Presented is a derivation of this field strength using the commutator approach detailing how certain terms cancel each other. Finally, the Yang-Mills field transformation is derived in a slightly different way than is traditionally done. 1

Samuel L. Marateck

2006-01-01T23:59:59.000Z

66

RAFFINATE CHARACTERIZATION PION RIDGE MILL  

E-Print Network (OSTI)

were: I. The Uranium Fuel Cycle Facilities 2. Underground Uranium Mines 3. Inactive Uranium Mill Tailings 4. Licensed Uranium Mill Tailings 5. High-Level Waste Disposal Facilities 6. Department of Energy-2 ...........................................1.2.2 Uranium Mills 1-2 ...............................1.2.3 Uranium Conversion Facilities 1

67

Detroit Public Lighting Department - Commercial and Industrial Energy Wise  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Detroit Public Lighting Department - Commercial and Industrial Detroit Public Lighting Department - Commercial and Industrial Energy Wise Program Detroit Public Lighting Department - Commercial and Industrial Energy Wise Program < Back Eligibility Commercial Industrial Savings Category Heating & Cooling Commercial Heating & Cooling Heating Home Weatherization Commercial Weatherization Cooling Other Sealing Your Home Design & Remodeling Windows, Doors, & Skylights Manufacturing Heat Pumps Appliances & Electronics Commercial Lighting Lighting Insulation Maximum Rebate $50,000 per customer/facility, or 100% of the project cost Program Info State Michigan Program Type Utility Rebate Program Rebate Amount Light Fixtures: $2-$200 Lighting Controls: $0.10-$65 HVAC Equipment: $10-$30/ton Programmable Thermostat: $80 Window Glazing: $0.30/square foot

68

Wise County, Virginia: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

Wise County, Virginia: Energy Resources Wise County, Virginia: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 37.0240877°, -82.605118° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":37.0240877,"lon":-82.605118,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

69

Wise County, Texas: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

Wise County, Texas: Energy Resources Wise County, Texas: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 33.2895861°, -97.6982272° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":33.2895861,"lon":-97.6982272,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

70

A WISE VIEW OF STAR FORMATION IN LOCAL GALAXY CLUSTERS  

SciTech Connect

We present results from a systematic study of star formation in local galaxy clusters using 22 {mu}m data from the Wide-field Infrared Survey Explorer (WISE). The 69 systems in our sample are drawn from the Cluster Infall Regions Survey, and all have robust mass determinations. The all-sky WISE data enable us to quantify the amount of star formation, as traced by 22 {mu}m, as a function of radius well beyond R{sub 200}, and investigate the dependence of total star formation rate upon cluster mass. We find that the fraction of star-forming galaxies increases with cluster radius but remains below the field value even at 3R{sub 200}. We also find that there is no strong correlation between the mass-normalized total specific star formation rate and cluster mass, indicating that the mass of the host cluster does not strongly influence the total star formation rate of cluster members.

Chung, Sun Mi; Gonzalez, Anthony H. [Department of Astronomy, University of Florida, Gainesville, FL 32611-2055 (United States); Eisenhardt, Peter R.; Stern, Daniel [Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA 91109 (United States); Stanford, Spencer A. [Department of Physics, University of California, Davis, CA 95616 (United States); Brodwin, Mark [Harvard-Smithsonian Center for Astrophysics, Cambridge, MA 02138 (United States); Jarrett, Thomas, E-mail: schung@astro.ufl.edu [Infrared Processing and Analysis Center, California Institute of Technology, Pasadena, CA 91125 (United States)

2011-12-10T23:59:59.000Z

71

Span-Wise Mixing in a Multi-Stage Compressor  

NLE Websites -- All DOE Office Websites (Extended Search)

SPAN-WISE MIXING IN A MULTI-STAGE COMPRESSOR SPAN-WISE MIXING IN A MULTI-STAGE COMPRESSOR Penn State Bud Lakshminarayana (Cengiz Camci) #036 * Phenomena that have eluded gas turbine designers include the effects of rotor-stator interactions and the physics of mixing of velocity, pressure, temperature and velocity fields. * Compressor tests were conducted in a three stage compressor where deterministic unsteadiness and random fluctuations causing spanwise mixing are realistically replicated . This provided valuable information on rotor stator interaction effects and the nature of the unsteadiness. * Multi-stage compressor energy efficiency improvements are only possible by careful implementation of spanwise mixing models into modern CFD codes (Computational Fluid Dynamics) . *This investigation provided results that are extremely helpful in improving computer

72

Underwater Networking Research at USC/ISI John Heidemann Wei Ye Jack Wills  

E-Print Network (OSTI)

Underwater Networking Research at USC/ISI John Heidemann Wei Ye Jack Wills {johnh. By comparison, underwater sensing today is often expensive, sparsely deployed, and wired, or with very limited of terrestrial sensor networks underwater. To this end we are developing new approaches for hardware, with a new

Heidemann, John

73

The Burning Issue By Alyssa A. Lappen and Jack D. Lauber  

E-Print Network (OSTI)

The Burning Issue By Alyssa A. Lappen and Jack D. Lauber FrontPageMagazine.com | March 1, 2006 in the U.S. By 1999, Japan was burning more than 74 percent of its municipal waste and landfilling only 20

Columbia University

74

Evaluation of End Mill Coatings  

SciTech Connect

Milling tests were run on families of High Speed Steel (HSS) end mills to determine their lives while machining 304 Stainless Steel. The end mills tested were made from M7, M42 and T15-CPM High Speed Steels. The end mills were also evaluated with no coatings as well as with Titanium Nitride (TiN) and Titanium Carbo-Nitride (TiCN) coatings to determine which combination of HSS and coating provided the highest increase in end mill life while increasing the cost of the tool the least. We found end mill made from M42 gave us the largest increase in tool life with the least increase in cost. The results of this study will be used by Cutting Tool Engineering in determining which end mill descriptions will be dropped from our tool catalog.

L. J. Lazarus; R. L. Hester,

2005-08-01T23:59:59.000Z

75

The Use of Demand-wise Shared Protection in Creating Topology Optimized High Availability Networks.  

E-Print Network (OSTI)

??In order to meet the availability requirements of modern communication networks, a number of survivability techniques were developed that adapt the demand-wise shared protection design (more)

Todd, Brody

2009-01-01T23:59:59.000Z

76

Compendium of basins for the potential applicability of Jack W. McIntyre`s patented tool  

Science Conference Proceedings (OSTI)

Geraghty & Miller, Inc. of Midland, Texas conducted geological and hydrological feasibility studies of the potential applicability of Jack W. McIntyre`s patented tool for the recovery of natural gas from coalbed formations in the San Juan, Powder River, Greater Green River, Piceance, Black Warrior, Appalachian and Michigan basins. Results from the surveys indicated that geology dominated research efforts for many of the basins. Limited information exists on the hydrology and water quality of the basins. All of the basins contain some potential for the use of Jack McIntyre`s patented production process. This process is designed specifically to separate produced water and produced gas in a downhole environment and may allow for more efficient and economical development of coalbed methane resources in this area.

Reed, P.D.

1994-03-01T23:59:59.000Z

77

Approximation Algorithm for Multiple-Tool Milling  

E-Print Network (OSTI)

Milling is the mechanical process of removing material from a piece of stock through the use of a rapidly spinning circular milling tool in order to form some desired geometric shape. An important problem in computer-aided design and manufacturing is the automated generation of efficient milling plans for computerized numerically controlled (CNC) milling machines. Among the most common milling problems is simple 2-dimensional pocket milling: cut a given 2-dimensional region down to some constant depth using a given set of milling tools. Most of the research in this area has focused on generating such milling plans assuming that the machine has a tool of a single size. Since modern CNC milling machines typically have access to a number of milling tools of various sizes and the ability to change tools automatically, this raises the important optimization problem of generating efficient milling plans that take advantage of this capability to reduce the total milling time. We consider the ...

Sunil Arya; Siu-Wing Cheng; David M. Mount

1999-01-01T23:59:59.000Z

78

Colony Mills Limited | Open Energy Information  

Open Energy Info (EERE)

Mills Limited Jump to: navigation, search Name Colony Mills Limited Place Lahore, Pakistan Sector Solar Product Yarn manufacturer, plans to set up solar thermal plant....

79

Deputy Assistant Secretary Jack Surash's Written Statement before the Subcommittee on Financial and Contracting Oversight Committee on Homeland Security and Governmental Affairs (June 27, 2013)  

Energy.gov (U.S. Department of Energy (DOE))

Written Statement of Jack Surash, Deputy Assistant Secretary for Acquisition and Project Management of Office of Environmental Management, United States Department of Energy, before the...

80

Deputy Assistant Secretary Jack Surash's Written Statement before the Subcommittee on Energy and Water Development on Major System Construction Projects (March 20, 2013)  

Energy.gov (U.S. Department of Energy (DOE))

Written Statement of Jack Surash, Deputy Assistant Secretary for Acquisition and Project Management of Office of Environmental Management, United States Department of Energy, before the...

Note: This page contains sample records for the topic "jack wise mills" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Microsoft Word - GridWise Release.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Release Date: January 9, 2008 Release Date: January 9, 2008 Contact: Christy Lambert (509) 375-3732; christy.lambert@pnl.gov Department of Energy putting power in the hands of consumers through technology Pacific Northwest National Laboratory announces the results of two studies demonstrating consumers and information technology can play an active role in managing the grid RICHLAND, Wash., January 9, 2008 - The Department of Energy's Pacific Northwest National Laboratory announced today the results of a year-long effort to put the power grid in the hands of consumers through technology. The Pacific Northwest GridWise(tm) Demonstration Project found that advanced technologies enable consumers to be active participants in improving power grid efficiency and reliability, while saving money in the process. On average, consumers

82

GridWise Alliance: Smart Grid RFI: Addressing Policy and Logistical  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

GridWise Alliance: Smart Grid RFI: Addressing Policy and Logistical GridWise Alliance: Smart Grid RFI: Addressing Policy and Logistical Challenges GridWise Alliance: Smart Grid RFI: Addressing Policy and Logistical Challenges The GridWise Alliance is a coalition of over 150 companies, organizations, and academic institutions advocating for a smart grid for a more sustainable future. We are consensus-driven and technology neutral and do not advocate for specific platforms or technologies, but, rather, for policies that will move the entire market forward to create jobs, provide clean energy solutions, and increase the reliability, flexibility, and efficiency of our electric grid. GridWise Alliance: Smart Grid RFI: Addressing Policy and Logistical Challenges More Documents & Publications WHAT A SMART GRID MEANS TO OUR NATION'S FUTURE.

83

U-115: Novell GroupWise Client Address Book Processing Buffer Overflow  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

5: Novell GroupWise Client Address Book Processing Buffer 5: Novell GroupWise Client Address Book Processing Buffer Overflow Vulnerability U-115: Novell GroupWise Client Address Book Processing Buffer Overflow Vulnerability March 2, 2012 - 7:00am Addthis PROBLEM: A vulnerability has been reported in in Novell GroupWise Client. PLATFORM: versions 8.0 through 8.02 HP3. ABSTRACT: The vulnerability is caused due to an error when processing Novell Address Book (".nab") files and can be exploited to cause a heap-based buffer overflow via an overly long email address. reference LINKS: Vendor Advisory Secunia Advisory 48199 CVE-2011-4189 IMPACT ASSESSMENT: High Discussion: The GroupWise 8 Client for Windows is vulnerable to an exploit where a malformed address book could cause heap memory corruption, which could lead to remote code execution under the privilege of the user that opened the

84

U-261: Novell GroupWise Internet Agent "Content-Length" Integer Overflow  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1: Novell GroupWise Internet Agent "Content-Length" Integer 1: Novell GroupWise Internet Agent "Content-Length" Integer Overflow Vulnerability U-261: Novell GroupWise Internet Agent "Content-Length" Integer Overflow Vulnerability September 17, 2012 - 6:00am Addthis PROBLEM: Novell GroupWise Internet Agent "Content-Length" Integer Overflow Vulnerability PLATFORM: The vulnerability is confirmed in version 8.0.2 HP3 and reported in version 2012. Other versions may also be affected. ABSTRACT: A vulnerability was reported in Novell GroupWise Internet Agent reference LINKS: Novell SecurityTracker Alert ID: 1027536 Secunia Advisory SA50622 CVE-2012-0271 IMPACT ASSESSMENT: Medium Discussion: A remote user can send a specially crafted request with the HTTP 'Content-Length' header value of '-1' to the administration interface via

85

Alloy by Double Mechanical Milling  

Science Conference Proceedings (OSTI)

The results show that the morphology of double mechanical milling powder is regular and the TiAl phase and Ti3Al phase were observed in the powders.

86

VOC Control in Kraft Mills  

Science Conference Proceedings (OSTI)

The formation of volatile organic compounds (VOCs), such as methanol, in kraft mills has been an environmental concern. Methanol is soluble in water and can increase the biochemical oxygen demand. Furthermore, it can also be released into atmosphere at the process temperatures of kraft mill-streams. The Cluster Rule of the EPA now requires the control of the release of methanol in pulp and paper mills. This research program was conducted to develop a computer simulation tool for mills to predict VOC air emissions. To achieve the objective of the research program, much effort was made in the development of analytical techniques for the analysis of VOC and determination of vapor liquid partitioning coefficient of VOCs in kraft mill-streams using headspace gas chromatography. With the developed analytical tool, methanol formation in alkaline pulping was studied in laboratory to provide benchmark data of the amount of methanol formation in pulping in kraft mills and for the validation of VOC formation and vapor-liquid equilibrium submodels. Several millwide air and liquid samplings were conducted using the analytical tools developed to validate the simulation tool. The VOC predictive simulation model was developed based on the basic chemical engineering concepts, i.e., reaction kinetics, vapor liquid equilibrium, combined with computerized mass and energy balances. Four kraft mill case studies (a continuous digester, two brownstock washing lines, and a pre-evaporator system) are presented and compared with mill measurements. These case studies provide valuable, technical information for issues related to MACT I and MACT II compliance, such as condensate collection and Clean-Condensate-Alternatives (CCA).

Zhu, J.Y.; Chai, X.-S.; Edwards, L.L.; Gu, Y.; Teja, A.S.; Kirkman, A.G.; Pfromm, P.H.; Rezac, M.E.

2001-09-26T23:59:59.000Z

87

Preliminary Design of The Wide-Field Infrared Survey Explorer (WISE)  

E-Print Network (OSTI)

The Wide-field Infrared Survey Explorer (WISE), a NASA MIDEX mission, will survey the entire sky in four bands from 3.3 to 23 microns with a sensitivity 1000 times greater than the IRAS survey. The WISE survey will extend the Two Micron All Sky Survey into the thermal infrared and will provide an important catalog for the James Webb Space Telescope. Using 1024x1024 HgCdTe and Si:As arrays at 3.3, 4.7, 12 and 23 microns, WISE will find the most luminous galaxies in the universe, the closest stars to the Sun, and it will detect most of the main belt asteroids larger than 3 km. The single WISE instrument consists of a 40 cm diamond-turned aluminum afocal telescope, a two-stage solid hydrogen cryostat, a scan mirror mechanism, and reimaging optics giving 5" resolution (full-width-half-maximum). The use of dichroics and beamsplitters allows four color images of a 47'x47' field of view to be taken every 8.8 seconds, synchronized with the orbital motion to provide total sky coverage with overlap between revolutions. WISE will be placed into a Sun-synchronous polar orbit on a Delta 7320-10 launch vehicle. The WISE survey approach is simple and efficient. The three-axis-stabilized spacecraft rotates at a constant rate while the scan mirror freezes the telescope line of sight during each exposure. WISE is currently in its Preliminary Design Phase, with the mission Preliminary Design Review scheduled for July, 2005. WISE is scheduled to launch in mid 2009; the project web site can be found at www.wise.ssl.berkeley.edu.

A. K. Mainzer; P. Eisenhardt; E. L. Wright; F. Liu; W. Irace; I. Heinrichsen; R. Cutri; V. Duval

2005-08-10T23:59:59.000Z

88

Yang-Mills algebra.  

E-Print Network (OSTI)

Some unexpected properties of the cubic algebra generated by the covariant derivatives of a generic Yang-Mills connection over the (s+1)-dimensional pseudo Euclidean space are pointed out. This algebra is Gorenstein and Koszul of global dimension 3 but except for s=1 (i.e. in the 2-dimensional case) where it is the universal enveloping algebra of the Heisenberg Lie algebra and is a cubic Artin-Schelter regular algebra, it fails to be regular in that it has exponential growth. We give an explicit formula for the Poincare series of this algebra A and for the dimension in degree n of the graded Lie algebra of which A is the universal enveloping algebra. In the 4-dimensional (i.e. s=3) Euclidean case, a quotient of this algebra is the quadratic algebra generated by the covariant derivatives of a generic (anti) self-dual connection. This latter algebra is Koszul of global dimension 2 but is not Gorenstein and has exponential growth. It is the universal enveloping algebra of the graded Lie-algebra which is the semi-direct product of the free Lie algebra with three generators of degree one by a derivation of degree one.

Alain Connes; Michel Dubois-Violette.

89

Efficient Tool Paths and Part Orientation for Face Milling  

E-Print Network (OSTI)

Avoiding Tool Exit in Planar Milling by Adjusting Width oftime. The most common face milling tool paths employed areand Part Orientation for Face Milling A. Rangarajan 1 , D.

Rangarajan, Arvind; Dornfeld, David

2004-01-01T23:59:59.000Z

90

Milling Stone Cultures in Northern California: Berryessa I  

E-Print Network (OSTI)

Weight 313 g. Edge angle MILLING STONE CULTURES IN NORTHERNSite and the Early Milling Stone Cultures of SouthernMilling Stone Cultures in Northern California: Berryessa I

True, D. L; Baumhoff, M. A; Hellen, J. E

1979-01-01T23:59:59.000Z

91

Feasible Offset Region Based Tool Path Planning for Face Milling  

E-Print Network (OSTI)

Path Planning for Face Milling, Masters Report, UniversityPath Planning for Face Milling Prabhu Ramachandran Sponsoredburr formation while face milling powertrain components in

Ramachandran, Prabhu; Dornfeld, David A

2003-01-01T23:59:59.000Z

92

Review of Geometric Solutions for Milling Burr Prediction and Minimization  

E-Print Network (OSTI)

height and thickness in face milling operation. Trans. ASME,Burr prediction system for face milling operation. Mastersminimi- zation in face milling: a geometric approach. Trans,

Tripathi, Shantanu; Dornfeld, David

2006-01-01T23:59:59.000Z

93

Comments of Mille Lacs Energy Cooperative | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Mille Lacs Energy Cooperative Comments of Mille Lacs Energy Cooperative Comments of Mille Lacs Energy Cooperative on Implementing the National Broadband Plan by Studying the...

94

In-Process Separation of Mill Scale From Oil at Steel Hot Rolling Mills  

Science Conference Proceedings (OSTI)

It is of vital importance to find cost-effective technologies of reducing oil concentration in mill scale in order to recycle the mill scale without causing detrimental...

95

Secretary Chu to Attend Inaugural GridWise Global Forum | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Attend Inaugural GridWise Global Forum Attend Inaugural GridWise Global Forum Secretary Chu to Attend Inaugural GridWise Global Forum September 22, 2010 - 12:00am Addthis WASHINGTON - On Thursday, September 23, 2010, U.S. Energy Secretary Steven Chu will deliver a keynote address at the inaugural GridWise Global Forum. Secretary Chu will discuss the importance of devloping a smart, strong and secure electricity delivery system to help build a 21st Century clean energy economy. WHO: U.S. Energy Secretary Steven Chu WHEN: Thursday, September 23, 2010 12:30 PM EDT *** Press Availability to follow*** WHERE: Ronald Reagan Building and International Trade Center 1300 Pennsylvannia Avenue, NW Washington, DC 20004 Media contact(s): (202) 586-4940 Addthis Related Articles Secretary Chu to Discuss Importance of Electric Grid Modernization to U.S.

96

Presentation to the EAC - GridWise Architecture Council - Erich Gunther  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

GridWise GridWise ® Architecture Council Erich W. Gunther, P.E., FIEEE Chairman, GWAC CTO, EnerNex Chairman, UCAIug Administrator, NIST SGiP GridWise® Architecture Council 2 GridWise Architecture Council * Strategic Impact * Diverse team of leaders embedded in industry * Shaping the guiding principles for a highly intelligent, interactive electric power system * Guidance for public and private infrastructure investment 3 GWAC Activity Area's * Interoperability * Exchange of actionable information - between two or more systems - across organizational boundaries * Shared meaning of the exchanged information * Agreed expectation of the response to information exchanges * Requisite quality of service of information exchange * Managing Complexity * Multiple versions and mixtures of technology

97

Gas fluidized-bed stirred media mill  

DOE Patents (OSTI)

A gas fluidized-bed stirred media mill is provided for comminuting solid ticles. The mill includes a housing enclosing a porous fluidizing gas diffuser plate, a baffled rotor and stator, a hollow drive shaft with lateral vents, and baffled gas exhaust exit ports. In operation, fluidizing gas is forced through the mill, fluidizing the raw material and milling media. The rotating rotor, stator and milling media comminute the raw material to be ground. Small entrained particles may be carried from the mill by the gas through the exit ports when the particles reach a very fine size.

Sadler, III, Leon Y. (Tuscaloosa, AL)

1997-01-01T23:59:59.000Z

98

WISE J163940.83-684738.6: A Y DWARF IDENTIFIED BY METHANE IMAGING  

SciTech Connect

We have used methane imaging techniques to identify the near-infrared counterpart of the bright Wide-field Infrared Survey Explorer (WISE) source WISE J163940.83-684738.6. The large proper motion of this source ( Almost-Equal-To 3.''0 yr{sup -1}) has moved it, since its original WISE identification, very close to a much brighter background star-it currently lies within 1.''5 of the J = 14.90 {+-} 0.04 star 2MASS 16394085-6847446. Observations in good seeing conditions using methane-sensitive filters in the near-infrared J band with the FourStar instrument on the Magellan 6.5 m Baade telescope, however, have enabled us to detect a near-infrared counterpart. We have defined a photometric system for use with the FourStar J2 and J3 filters, and this photometry indicates strong methane absorption, which unequivocally identifies it as the source of the WISE flux. Using these imaging observations we were then able to steer this object down the slit of the Folded-port Infrared Echellette spectrograph on a night of 0.''6 seeing, and so obtain near-infrared spectroscopy confirming a Y0-Y0.5 spectral type. This is in line with the object's near-infrared-to-WISE J3 - W2 color. Preliminary astrometry using both WISE and FourStar data indicates a distance of 5.0 {+-} 0.5 pc and a substantial tangential velocity of 73 {+-} 8 km s{sup -1}. WISE J163940.83-684738.6 is the brightest confirmed Y dwarf in the WISE W2 passband and its distance measurement places it among the lowest luminosity sources detected to date.

Tinney, C. G.; Salter, Graeme [Department of Astrophysics, School of Physics, University of New South Wales, Sydney, NSW 2052 (Australia); Faherty, Jacqueline K. [Department of Astronomy, University of Chile, Camino El Observatorio 1515, Casilla 36-D, Santiago (Chile); Kirkpatrick, J. Davy; Gelino, Christopher R.; Griffith, Roger L. [Infrared Processing and Analysis Center, MS 100-22, California Institute of Technology, Pasadena, CA 91125 (United States); Wright, Edward L. [Department of Physics and Astronomy, UCLA, Los Angeles, CA 90095-1547 (United States); Cushing, Michael C., E-mail: c.tinney@unsw.edu.au [Department of Physics and Astronomy, MS 111, University of Toledo, 2801 W. Bancroft St., Toledo, OH 43606-3328 (United States)

2012-11-01T23:59:59.000Z

99

MILLING OPERATIONS Milling is the process of machining flat, curved, or Milling machines are basically classified as vertical or  

E-Print Network (OSTI)

-speed steel, stellite, and cemented carbide cutters reamer shank. In this case, one or two side milling have

Gellman, Andrew J.

100

Jack Douglas  

Science Conference Proceedings (OSTI)

... Education: BS Chemistry, Virginia Commonwealth University (1986); MS Mathematics,Virgnia Commonwealth University (1981); ...

2012-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "jack wise mills" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Jack Deslippe  

NLE Websites -- All DOE Office Websites (Extended Search)

Steven G Louie, Alessandra Lanzara, "Many-body interactions in quasi-freestanding graphene", Proceedings of the National Academy of Sciences, 2011, 108:11365--113, Li Yang,...

102

Ivaco Rolling Mills LP, Chemistry Laboratory  

Science Conference Proceedings (OSTI)

Ivaco Rolling Mills LP, Chemistry Laboratory. NVLAP Lab Code: 200143-0. Address and Contact Information: Highway 17 ...

2013-09-06T23:59:59.000Z

103

URANIUM MILL TAILINGS RADON FLUX CALCULATIONS  

E-Print Network (OSTI)

URANIUM MILL TAILINGS RADON FLUX CALCULATIONS PI?ON RIDGE PROJECT MONTROSE COUNTY, COLORADO (EFRC) proposes to license, construct, and operate a conventional acid leach uranium and vanadium mill storage pad, and access roads. The mill is designed to process ore containing uranium and vanadium

104

Microsoft Word - CX-Grizzly-CaptainJack_No1_WEB.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

21, 2010 21, 2010 REPLY TO ATTN OF: KEP-4 SUBJECT: Environmental Clearance Memorandum Corinn Castro Project Manager - TELM-TPP-3 Proposed Action: Replace spacer dampers along the Grizzly - Captain Jack No. 1 500-kV transmission line Budget Information: Work Order # 00255064 PP&A Project No.: PP&A 1511 Categorical Exclusion Applied (from Subpart D, 10 C.F.R. Part 1021): B1.3, Routine maintenance activities for structures, rights-of-way, and infrastructures, (such as roads), that are required to maintain infrastructures in a condition suitable for a facility to be used for its designed purpose. Location: The proposed project is located in Crook, Deschutes, Jefferson, Lake and Klamath counties, Oregon. Proposed by: Bonneville Power Administration (BPA)

105

SCE&G (Electric) - Residential EnergyWise Program | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

SCE&G (Electric) - Residential EnergyWise Program SCE&G (Electric) - Residential EnergyWise Program SCE&G (Electric) - Residential EnergyWise Program < Back Eligibility Residential Savings Category Home Weatherization Commercial Weatherization Sealing Your Home Heating & Cooling Commercial Heating & Cooling Cooling Other Ventilation Heat Pumps Appliances & Electronics Commercial Lighting Lighting Water Heating Maximum Rebate Home Performance with ENERGY STAR: $2500 Air Infiltration Reduction and Insulation: $850 Program Info State South Carolina Program Type Utility Rebate Program Rebate Amount Home Performance Assessment: $200 Air Infiltration Reduction and Insulation: 25% of cost Duct Sealing: $150 Duct Insulation or Replacement: $150 Central AC or Heat Pump Tune-up: $60 Programmable Thermostat: $50

106

Microsoft Word - GridWise Alliance Membership_10_29_10  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

GridWise Alliance Response to Smart Grid RFI: Addressing Policy and Logistical Challenges GridWise Alliance Response to Smart Grid RFI: Addressing Policy and Logistical Challenges November 1, 2010 Ms. Patricia Hoffman Assistant Secretary for Electricity Delivery and Energy Reliability United States Department of Energy 1000 Independence Avenue, SW, Room 8H033 Washington, DC 20585 RE: Smart Grid RFI: Addressing Policy and Logistical Challenges Dear Secretary Hoffman, Thank you for the opportunity to provide information to the Department of Energy Federal Register Doc. 2010-23251 filed September 16, 2010. The GridWise Alliance is a coalition of over 150 companies, organizations, and academic institutions advocating for a smart grid for a more sustainable future. We

107

SCE&G (Electric) - Commercial EnergyWise Program | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

SCE&G (Electric) - Commercial EnergyWise Program SCE&G (Electric) - Commercial EnergyWise Program SCE&G (Electric) - Commercial EnergyWise Program < Back Eligibility Commercial Construction Fed. Government Industrial Institutional Local Government Schools State Government Tribal Government Savings Category Heating & Cooling Commercial Heating & Cooling Cooling Home Weatherization Construction Commercial Weatherization Design & Remodeling Other Heat Pumps Appliances & Electronics Commercial Lighting Lighting Program Info State South Carolina Program Type Utility Rebate Program Rebate Amount Central AC/Heat Pumps (Unitary/Matched Split): $10-$40/ton Central AC/Heat Pumps (Water/Evaporative): $60/ton Packaged Terminal AC/Heat Pumps: $20-$35/unit VFDs: $650-$6200/motor HVAC Chiller Incentives: $10-$35/ton + $3-$12 Performance Incentive

108

2012 SG Peer Review - GridWise Architecture Council - Ron Melton, PNNL  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Architecture and Standards and GridWise® Architecture and Standards and GridWise® Architecture Council (GWAC) Ron Melton, GWAC Administrator Pacific Northwest National Laboratory PNNL-SA-88349 June 7, 2012 December 2008 Architecture and Standards GridWise Architecture Council Objective Life-cycle Funding Summary ($K) Prior to FY 12 FY12, authorized FY13, requested Out-year(s) $5,400K $560K $200K $500K/yr Technical Scope 2 Advance interoperability to enable full-scale smart grid deployments by engaging stakeholders in defining interoperability principles, methods, and tools. Provide DOE related point of coordination for NIST in response to EISA 2007 legislation. Organizational (Pragmatics) 8: Economic/Regulatory Policy 7: Business Objectives 6: Business Procedures Informational (Semantics) 5: Business Context

109

SRP - EarthWise Solar Energy Incentive Program | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

SRP - EarthWise Solar Energy Incentive Program SRP - EarthWise Solar Energy Incentive Program SRP - EarthWise Solar Energy Incentive Program < Back Eligibility Commercial Residential Fed. Government Local Government Nonprofit Schools State Government Savings Category Solar Buying & Making Electricity Heating & Cooling Swimming Pool Heaters Water Heating Maximum Rebate Standard (non OG-300 rated) and solar pool heating commercial solar water heaters: $75,000 per customer per fiscal year, not to exceed 60% of project costs. Residential PV: $500 Small Commercial PV: $30,000 Program Info State Arizona Program Type Utility Rebate Program Rebate Amount ''Incentive Levels as of May 1, 2013:'' Residential PV: $0.10/W Nonprofit, School, and Government PV: $0.04/kWh Small Commercial PV: $0.10/W Residential solar water heaters: $0.35/kWh for 1st year estimated energy

110

Effect of cyclone assisted milling on legume flour characteristics and functionality in selected food products.  

E-Print Network (OSTI)

??Legumes (cowpea and soybean) were milled using a cyclone-assisted attrition mill to produce fine legume flour. Milling variations consisted of alterations in mill design and (more)

Jarrard, Mark, Jr.

2006-01-01T23:59:59.000Z

111

Online SAG Mill Pluse Measurement and Optimization  

SciTech Connect

The grinding efficiency of semi autogenous milling or ball milling depends on the tumbling motion of the total charge within the mill. Utilization of this tumbling motion for efficient breakage of particles depends on the conditions inside the mill. However, any kind of monitoring device to measure the conditions inside the mill shell during operation is virtually impossible due to the severe environment presented by the tumbling charge. An instrumented grinding ball, which is capable of surviving a few hours and transmitting the impacts it experiences, is proposed here. The spectrum of impacts collected over 100 revolutions of the mills presents the signature of the grinding environment inside mill. This signature could be effectively used to optimize the milling performance by investigating this signature's relation to mill product size, mill throughput, make-up ball size, mill speed, liner profile and ball addition rates. At the same time, it can also be used to design balls and liner systems that can survive longer in the mill. The technological advances made in electronics and communication makes this leap in instrumentation certainly viable. Hence, the instrumented grinding ball offers the ability to qualitatively observe and optimize the milling environment. An instrumented load cell package that can measure the force of impacts inside the grinding chamber of a mill is developed here. The signal from the instrumented load cell package is interpreted in terms of a histogram termed as an impact spectrum which is a plot of the number of impacts at a specific energy level against the energy. It reflects on the average force regime of the mill. The instrumented load cell package was calibrated against the ultra fast load cell which has been unanimously accepted as a standard to measure single breakage events. The load cell package was successfully used to produce impact spectra in an 8.5 inch lab scale mill. The mill speed and the ball size were varied to study their effect on the impact spectra. A good correlation was found between the process variables and the impact spectra. The load cell package was then used in a 16 inch pilot scale mill. The mill speed, ball size, and mill filling were varied here and a consistent trend between these variables and impact spectra was observed. With a better understanding developed from the initial tests, the design of the load cell package was significantly changed to eliminate noise. With the new design, the impact spectra were re-determined in the 16 inch pilot mill varying the process variables - ball size, mill speed, and mill filling. Finally, it is successfully shown that a change in the operating variables of a mill can be seen in the impact spectra and that this concept can be successfully developed to monitor the grinding operation of industrial mills. To adapt it to industrial level it is mandatory to make the load cell package wireless. A design of a wireless circuit that is capable of transferring data at the required speed of 1000 kbps was also developed and tested at Cortez Gold Mines (CGM), Nevada.

Raj Rajamani; Jose Delgadillo; Vishal Duriseti

2007-06-30T23:59:59.000Z

112

The First Hundred Brown Dwarfs Discovered by the Wide-field Infrared Survey Explorer (WISE)  

E-Print Network (OSTI)

We present ground-based spectroscopic verification of 6 Y dwarfs (see also Cushing et al.), 89 T dwarfs, 8 L dwarfs, and 1 M dwarf identified by the Wide-field Infrared Survey Explorer (WISE). Eighty of these are cold brown ...

Bochanski, John J.

113

Asymptotic distribution of Wishart matrix for block-wise dispersion of population eigenvalues  

Science Conference Proceedings (OSTI)

This paper deals with the asymptotic distribution of Wishart matrix and its application to the estimation of the population matrix parameter when the population eigenvalues are block-wise infinitely dispersed. We show that the appropriately normalized ... Keywords: Stein's loss, 62C20, 62H10, Asymptotic risk, Covariance matrix, Quadratic loss, Wishart distribution

Yo Sheena; Akimichi Takemura

2008-04-01T23:59:59.000Z

114

An Improved Test Case Generation Method of Pair-Wise Testing  

Science Conference Proceedings (OSTI)

Pair-wise testing is a testing criterion based on specification, which requires that for each pair of parameters, every combination of their valid value should be covered by at least one test case in the test set. This paper presents an improved method ...

Qian Feng-an; Jiang Jian-hui

2007-10-01T23:59:59.000Z

115

Uranium mill monitoring for natural fission reactors  

SciTech Connect

Isotopic monitoring of the product stream from operating uranium mills is proposed for discovering other possible natural fission reactors; aspects of their occurrence and discovery are considered. Uranium mill operating characteristics are formulated in terms of the total uranium capacity, the uranium throughput, and the dilution half-time of the mill. The requirements for detection of milled reactor-zone uranium are expressed in terms of the dilution half-time and the sampling frequency. Detection of different amounts of reactor ore with varying degrees of /sup 235/U depletion is considered.

Apt, K.E.

1977-12-01T23:59:59.000Z

116

Wet Corn Milling Plant EPI | ENERGY STAR  

NLE Websites -- All DOE Office Websites (Extended Search)

Wet Corn Milling Plant EPI Secondary menu About us Press room Contact Us Portfolio Manager Login Facility owners and managers Existing buildings Commercial new construction...

117

The Bowersock Mills and Power Company 1874  

NLE Websites -- All DOE Office Websites (Extended Search)

Hydroelectric Energy The Bowersock Mills and Power Co., Lawrence, KS Hydroelectric Energy Potential for U.S. BMPC Plant At Forefront of Development Curve "In our estimates...

118

A Milling-Implement Quarry at Elephant Mountain, California  

E-Print Network (OSTI)

pp. 191-221 (1995). A Milling-Implement Quarry at Elephantwere shaped into aboriginal milling stones and pestles andin the Mojave River region. The milling-implement quarry at

Schneider, Joan S; Lerch, Michael K; Smith, Gerald A

1995-01-01T23:59:59.000Z

119

Two Milling Stone Inventories from Northern San Diego County, California  

E-Print Network (OSTI)

2, pp. 233-261 (1982). Two Milling Stone Inventories from5. Manos from Rincon 301. MILLING STONE INVENTORIES FROM SANd-e) from Rincon 301. MILLING STONE INVENTORIES FROM SAN

True, D. L; Beemer, Eleanor

1982-01-01T23:59:59.000Z

120

Virtual cutter path display for dental milling machine  

E-Print Network (OSTI)

This paper presents the prototype of a mixed reality system using the computer controlled dental milling machine, which is called MRD Mill. First, overview of the core dental milling machine developed in this study is ...

Ito, Teruaki

Note: This page contains sample records for the topic "jack wise mills" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Clean Air Act Requirements: Uranium Mill Tailings  

E-Print Network (OSTI)

EPA'S Clean Air Act Requirements: Uranium Mill Tailings Radon Emissions Rulemaking Reid J. Rosnick Presentation to Environmental Protection Agency Uranium Contamination Radiation Protection Division (6608J requirements for operating uranium mill tailings (Subpart W) Status update on Subpart W activities Outreach

122

Tamil Nadu Spinning Mills Association TASMA | Open Energy Information  

Open Energy Info (EERE)

search Name Tamil Nadu Spinning Mills Association (TASMA) Place Dindigul, Tamil Nadu, India Zip 624003 Sector Wind energy Product Association of spinning mill owners; promoting...

123

NanoFab Tool: 4Wave Ion Milling System  

Science Conference Proceedings (OSTI)

... 4Wave Ion Milling System. CORAL Name: Ion Mill. Location: Building 215 (NanoFab Clean Room Bay A106). Description: ...

2010-10-13T23:59:59.000Z

124

NATIONAL ENERGY POLICY Using Energy Wisely Increasing Energy Conservation and Efficiency  

NLE Websites -- All DOE Office Websites (Extended Search)

Using Energy Wisely Using Energy Wisely Increasing Energy Conservation and Efficiency The Department of Energy has installed two low-sulfur light bulbs as a test at its Forrestal Building headquar- ters in Washington, D.C. The two golf ball-sized bulbs, like those on the opposite page, are at each end of a 240-foot, 10-inch-wide reflective plastic "light pipe." U.S. DEPARTMENTOF ENERGY U.S. DEPARTMENTOF ENERGY E nergy efficiency is the ability to use less energy to produce the same amount of lighting, heating, transportation, and other energy services. For a family or business, conserving energy means lower energy bills. For the country as a whole, greater en- ergy efficiency helps us make the most of U.S. energy resources, reduces energy shortages, lowers our reliance on energy

125

Wet Corn Milling Energy Guide  

NLE Websites -- All DOE Office Websites (Extended Search)

307 307 ERNEST ORLANDO LAWRENCE BERKELEY NATIONAL LABORATORY Energy Efficiency Improvement and Cost Saving Opportunities for the Corn Wet Milling Industry An ENERGY STAR Guide for Energy and Plant Managers Christina Galitsky, Ernst Worrell and Michael Ruth Environmental Energy Technologies Division Sponsored by the U.S. Environmental Protection Agency July 2003 Disclaimer This document was prepared as an account of work sponsored by the United States Government. While this document is believed to contain correct information, neither the United States Government nor any agency thereof, nor The Regents of the University of California, nor any of their employees, makes any warranty, express or implied, or assumes any legal responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product,

126

Web Information Systems Engineering - WISE 2010 Workshops: WISE 2010 International Symposium WISS, and International Workshops CISE, MBC, Hong Kong, ... Applications, incl. Internet/Web, and HCI), 1st edition  

Science Conference Proceedings (OSTI)

This book contains the carefully selected and reviewed papers presented at three satellite events that were held in conjunction with the 11th International Conference on Web Information Systems Engineering, WISE 2010, in Hong Kong, China, in December ...

Dickson K. W. Chiu; Ladjel Bellatreche; Hideyasu Sasaki; Ho-fung Leung; Shing-Chi Cheung; Haiyang Hu; Jie Shao

2011-11-01T23:59:59.000Z

127

Mille Lacs Energy Cooperative | Open Energy Information  

Open Energy Info (EERE)

Mille Lacs Energy Cooperative Mille Lacs Energy Cooperative (Redirected from Mille Lacs Electric Coop) Jump to: navigation, search Name Mille Lacs Energy Cooperative Place Minnesota Utility Id 12546 Utility Location Yes Ownership C NERC Location MRO NERC MRO Yes ISO MISO Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Dual Fuel Space Heating Rate Electric Combination Heating Rate Freedom Heating Rate Residential General Service Residential Green Power Energy Large Power Commercial Large Power - Industrial Industrial Light - 100 watt HPS Lighting Light - 150 watt HPS Lighting

128

Yang-Mills Gravity in Biconformal Space  

E-Print Network (OSTI)

We propose a new conformal supergravity model with direct relevance to string/gauge theory dualities. This biconformal supergravity theory is formulated with a Yang-Mills type action. The resulting 8-dim symplectic geometries describe 4-dim scale-invariant general relativity. We then show an extension of N = 4 SUSY Yang-Mills to a curved biconformal geometry such that the extended form of the Yang-Mills fields provides the curvatures for the biconformal space. These curvatures solve the biconformal field equations whenever the original 4-dim fields satisfy the 4-dim YM theory. This gives a 1-1 mapping between the gravity and gauge theories. We also display systematic extension of any spacetime co-tangent bundle to a biconformal space, and extension of any 4-dim Yang-Mills theory to an equivalent theory on that space. 1

Lara B. Anderson; James T. Wheeler

2008-01-01T23:59:59.000Z

129

Yang- Mills on Quantum Heisenberg Manifolds  

E-Print Network (OSTI)

In the noncommutative geometry program of Connes there are two variations of the concept of Yang-Mills action functional. We show that for the quantum Heisenberg manifolds they agree.

Partha Sarathi Chakraborty; Satyajit Guin

2013-04-29T23:59:59.000Z

130

DCnet Research Network David L. Mills  

E-Print Network (OSTI)

Washington, DC Evans-gw and mudge-gw are dual-redundant EECIS department routers for 10/100-Mb campus printer server 128.4.2.21 wiley Pentium II 450MHz Windows XP Beverly Mills #12;2-Aug-04 10 DC MITBBN BELL2-Aug-04 1 DC MITBBN BELL DARPA UDEL DCnet Research Network David L. Mills University of Delaware

Mills, David L.

131

Influences on Burr Size During Face-Milling of Aluminum Alloys and Cast Iron  

E-Print Network (OSTI)

ON BURR SIZE DURING FACE-MILLING OF ALUMINUM-SILICON ALLOYSburrs formed during face milling. Other influences are tooliron. INTRODUCTION Face milling is a common procedure during

Shefelbine, Wendy; Dornfeld, David

2004-01-01T23:59:59.000Z

132

Energy Consumption Characterization and Reduction Strategies for Milling Machine Tool Use  

E-Print Network (OSTI)

Part Orientation for Face Milling, in: Annals of the CIRP,2010): Environmental Analysis of Milling Machine Tool Use inand Reduction Strategies for Milling Machine Tool Use Nancy

Diaz, Nancy; E. Redelsheimer; Dornfeld, David

2011-01-01T23:59:59.000Z

133

Environmental Analysis of Milling Machine Tool Use in Various Manufacturing Environments  

E-Print Network (OSTI)

Environmental Analysis of Milling Machine Tool Use inHorvath, David Dornfeld Milling is a type of cutting processof a standard vertical milling machine tool. In this

Diaz, Nancy; Helu, Moneer; Jayanathan, Stephen; Chen, Yifen; Horvath, Arpad; Dornfeld, David

2010-01-01T23:59:59.000Z

134

Jet milling from a particle perspective : predicting particle fracture based on mechanical material properties.  

E-Print Network (OSTI)

??Milling is a very old discipline originated in milling agricultural products to flour. Despite the enormous literature on size reduction, milling is a unit operation (more)

Vegt, Onno Martinus

2007-01-01T23:59:59.000Z

135

DOE - Office of Legacy Management -- Monticello Mill Site - UT 03  

NLE Websites -- All DOE Office Websites (Extended Search)

Mill Site - UT 03 Mill Site - UT 03 FUSRAP Considered Sites Site: Monticello Mill Site (UT.03) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: Also see Monticello, Utah, Disposal and Processing Sites Documents Related to Monticello Mill Site Monticello Mill Tailings Site Operable Unit III Interim Remedial Action Progress Report July 1999-July 2000. GJO-2000-163-TAR. September 2000 U.S. Department of Energy at Grand Junction 2003 Annual Inspection Monticello, Utah November 2003 2005 Annual Inspection of the Monticello Mill Tailings (USDOE) and Monticello Radioactively Contaminated Properties Sites December 2005 Office

136

Transportation of the MOAB Uranium Mill Tailings to White Mesa Mill by Slurry Pipeline  

SciTech Connect

The Moab uranium mill tailings pile, located at the former Atlas Minerals Corporation site approximately three miles north of Moab, Utah, is now under the control of the US Department of Energy (''DOE''). The location of the tailings pile adjacent to the Colorado River, and the ongoing contamination of groundwater and seepage of pollutants into the river, have lead to the investigation, as part of the final site remediation program, of alternatives to relocate the tailings to a qualified permanent disposal site. This paper will describe the approach being taken by the team formed between International Uranium (USA) Corporation (''IUC'') and Washington Group International (''WGINT'') to develop an innovative technical proposal to relocate the Moab tailings to IUC's White Mesa Mill south of Blanding, Utah. The proposed approach for relocating the tailings involves using a slurry pipeline to transport the tailings to the White Mesa Mill. The White Mesa Mill is a fully licensed, active uranium mill site that is uniquely suited for permanent disposal of the Moab tailings. The tailings slurry would be dewatered at the White Mesa Mill, the slurry water would be recycled to the Moab site for reuse in slurry makeup, and the ''dry'' tailings would be permanently disposed of in an approved below grade cell at the mill site.

Hochstein, R. F.; Warner, R.; Wetz, T. V.

2003-02-26T23:59:59.000Z

137

Rotating Einstein-Yang-Mills Black Holes  

E-Print Network (OSTI)

We construct rotating hairy black holes in SU(2) Einstein-Yang-Mills theory. These stationary axially symmetric black holes are asymptotically flat. They possess non-trivial non-Abelian gauge fields outside their regular event horizon, and they carry non-Abelian electric charge. In the limit of vanishing angular momentum, they emerge from the neutral static spherically symmetric Einstein-Yang-Mills black holes, labelled by the node number of the gauge field function. With increasing angular momentum and mass, the non-Abelian electric charge of the solutions increases, but remains finite. The asymptotic expansion for these black hole solutions includes non-integer powers of the radial variable.

B. Kleihaus; J. Kunz; F. Navarro-Lerida

2002-07-10T23:59:59.000Z

138

EIS-0355: Remediation of the Moab Uranium Mill Tailings, Grand...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

355: Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, Utah EIS-0355: Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, Utah...

139

Pulp and Paper Mills: Profiting for Efficient Motor System Use...  

NLE Websites -- All DOE Office Websites (Extended Search)

Motor System Use This profile discusses how energy efficienct motor systems can help pulp and paper mills save money. Pulp and Paper Mills: Profiting for Efficient Motor System Use...

140

Pulverizer Maintenance Guide, Volume 1: Raymond Bowl Mills  

Science Conference Proceedings (OSTI)

This guide provides fossil plant personnel with current maintenance information on the Alstom Raymond Bowl mills and will assist a plant in improving the maintenance of the pulverizer mills.

2004-08-27T23:59:59.000Z

Note: This page contains sample records for the topic "jack wise mills" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Biomass Burner Cogenerates Jobs and Electricity from Lumber Mill...  

NLE Websites -- All DOE Office Websites (Extended Search)

Burner Cogenerates Jobs and Electricity from Lumber Mill Waste Biomass Burner Cogenerates Jobs and Electricity from Lumber Mill Waste December 6, 2011 - 3:57pm Addthis Dale and...

142

Effect of Ball Milling Temperature on the Ultra Fine Grained ...  

Science Conference Proceedings (OSTI)

The mixtures of Fe-14Cr-3W-0.4Ti powder and Y2O3 were ball milled for 40 ... The size of nanoclusters seems to be dependent on milling temperature too.

143

Gravity and Yang?Mills Fields: Geometrical Approaches  

Science Conference Proceedings (OSTI)

A new geometrical framework for a tetrad?affine formulation of gravity coupled with Yang?Mills fields is proposed.

Roberto Cianci; Stefano Vignolo

2005-01-01T23:59:59.000Z

144

Focused Ion Beam Milling (FIB) Information at NIST  

Science Conference Proceedings (OSTI)

Focused Ion Beam Milling (FIB) Information at NIST. Analysis of 3D Elemental Mapping Artifacts in Biological Specimens ...

2010-10-05T23:59:59.000Z

145

Nonperturbative and analytical approach to Yang-Mills thermodynamics  

E-Print Network (OSTI)

An analytical, macroscopic approach to SU(N) Yang-Mills thermodynamics is developed, tested,and applied.

Ralf Hofmann

2004-04-29T23:59:59.000Z

146

Mill Designed Bio bleaching Technologies  

DOE Green Energy (OSTI)

A key finding of this research program was that Laccase Mediator Systems (LMS) treatments on high-kappa kraft could be successfully accomplished providing substantial delignification (i.e., > 50%) without detrimental impact on viscosity and significantly improved yield properties. The efficiency of the LMS was evident since most of the lignin from the pulp was removed in less than one hour at 45 degrees C. Of the mediators investigated, violuric acid was the most effective vis-a-vis delignification. A comparative study between oxygen delignification and violuric acid revealed that under relatively mild conditions, a single or a double LMS{sub VA} treatment is comparable to a single or a double O stage. Of great notability was the retention of end viscosity of LMS{sub VA} treated pulps with respect to the end viscosity of oxygen treated pulps. These pulps could then be bleached to full brightness values employing conventional ECF bleaching technologies and the final pulp physical properties were equal and/or better than those bleached in a conventional ECF manner employing an aggressively O or OO stage initially. Spectral analyses of residual lignins isolated after LMS treated high-kappa kraft pulps revealed that similar to HBT, VA and NHA preferentially attack phenolic lignin moieties. In addition, a substantial decrease in aliphatic hydroxyl groups was also noted, suggesting side chain oxidation. In all cases, an increase in carboxylic acid was observed. Of notable importance was the different selectivity of NHA, VA and HBT towards lignin functional groups, despite the common N-OH moiety. C-5 condensed phenolic lignin groups were overall resistant to an LMS{sub NHA, HBT} treatments but to a lesser extent to an LMS{sub VA}. The inactiveness of these condensed lignin moieties was not observed when low-kappa kraft pulps were biobleached, suggesting that the LMS chemistry is influenced by the extent of delignification. We have also demonstrated that the current generation of laccase has a broad spectrum of operating parameters. Nonetheless, the development of future genetically engineered laccases with enhanced temperature, pH and redox potentials will dramatically improve the overall process. A second challenge for LMS bleaching technologies is the need to develop effective, catalytic mediators. From the literature we already know this is feasible since ABTS and some inorganic mediators are catalytic. Unfortunately, the mediators that exhibit catalytic properties do not exhibit significant delignification properties and this is a challenge for future research studies. Potential short-term mill application of laccase has been recently reported by Felby132 and Chandra133 as they have demonstrated that the physical properties of linerboard can be improved when exposed to laccase without a chemical mediator. In addition, xxx has shown that the addition of laccase to the whitewater of the paper machine has several benefits for the removal of colloidal materials. Finally, this research program has presented important features on the delignification chemistry of LMS{sub NHA} and LMS{sub VA} that, in the opinion of the author, are momentous contributions to the overall LMS chemistry/biochemistry knowledge base which will continue to have future benefits.

Institute of Paper Science Technology

2004-01-30T23:59:59.000Z

147

Tons of Heavy Metals in Mill Creek Sediments Heather Freeman  

E-Print Network (OSTI)

with industries. Paper, woolen, flour, and cotton mills, starch factories, slaughterhouses, distilleriesTons of Heavy Metals in Mill Creek Sediments Heather Freeman 8/30/99 Geology Department Advisors: Dr. Kees DeJong Dr. Barry Manyard Dr. David Nash #12;Tons of heavy metals in Mill Creek sediments

Maynard, J. Barry

148

Focused helium ion beam milling and deposition  

Science Conference Proceedings (OSTI)

The use of a helium ion microscope with an integrated gas injection system for nanofabrication is explored by demonstrating the milling of fine features into single layered graphene and the controlled deposition of tungsten and platinum wires from gaseous ... Keywords: Beam-induced deposition, Focused ion beam, Gas injection system, Graphene, Helium ion microscope

S. A. Boden; Z. Moktadir; D. M. Bagnall; H. Mizuta; H. N. Rutt

2011-08-01T23:59:59.000Z

149

Loop expansion in Yang-Mills thermodynamics  

E-Print Network (OSTI)

We argue that a selfconsistent spatial coarse-graining, which involves interacting (anti)calorons of unit topological charge modulus, implies that real-time loop expansions of thermodynamical quantities in the deconfining phase of SU(2) and SU(3) Yang-Mills thermodynamics are, modulo 1PI resummations, determined by a finite number of connected bubble diagrams.

Ralf Hofmann

2006-09-05T23:59:59.000Z

150

Cutting Energy-Efficiency R&D: Penny-wise and Petro-foolish  

NLE Websites -- All DOE Office Websites (Extended Search)

1 1 Cutting Energy-Efficiency R&D: Penny-wise and Petro-foolish Consumers save about $150 billion per year (about $600 per person) thanks to improvements in energy efficiency, policies that encourage efficiency, structural changes and lower energy prices. DOE's energy-efficiency programs cost about one-tenth of 1% of the annual U.S. energy bill. While Congress moves to cut or eliminate a host of government energy-efficiency programs, little thought is being given to the billions of dollars of energy savings that will be forfeited by American homes and businesses. As oil imports eclipse levels that preceded the first energy crisis, as scientists discover yet more evidence of global climate change, as energy bills become a higher percentage of income for the poor, and as

151

Comprehensive Approaches to Industrial Energy Efficiency: Examples from the Climate Wise Program  

E-Print Network (OSTI)

The Climate Wise Program is a partnership initiative sponsored by the U.S. EPA, with technical support from the U.S. DOE, with industry. It is designed to stimulate the voluntary reduction of greenhouse gas emissions among participating manufacturing companies. Since its inception in 1994, more than 400, companies representing approximately 11 percent of U.S. industrial energy use have joined the program. In doing so, these companies agreed to develop a portfolio of cost-effective and innovative actions and, in turn, receive technical assistance, peer exchange opportunities, and help in identifying financial assistance resources. This paper presents an overview and analysis of the Action Plans received to date and spotlights the comprehensive approaches that several partner companies are taking.

Milmoe, P. H.; Winkelman, S. R.; Asrael, J.

1998-04-01T23:59:59.000Z

152

A SEARCH FOR HIGH PROPER MOTION T DWARFS WITH Pan-STARRS1 + 2MASS + WISE  

Science Conference Proceedings (OSTI)

We have searched {approx}8200 deg{sup 2} for high proper motion ({approx}0.''5-2.''7 year{sup -1}) T dwarfs by combining first-epoch data from the Pan-STARRS1 (PS1) 3{pi} Survey, the Two Micron All Sky Survey (2MASS) All-Sky Point Source Catalog, and the WISE Preliminary Data Release. We identified two high proper motion objects with the very red (W1 - W2) colors characteristic of T dwarfs, one being the known T7.5 dwarf GJ 570D. Near-IR spectroscopy of the other object (PSO J043.5395+02.3995 {identical_to} WISEP J025409.45+022359.1) reveals a spectral type of T8, leading to a photometric distance of 7.2 {+-} 0.7 pc. The 2.''56 year{sup -1} proper motion of PSO J043.5+02 is the second highest among field T dwarfs, corresponding to a tangential velocity of 87 {+-} 8 km s{sup -1}. According to the Besancon galaxy model, this velocity indicates that its galactic membership is probably in the thin disk, with the thick disk an unlikely possibility. Such membership is in accord with the near-IR spectrum, which points to a surface gravity (age) and metallicity typical of the field population. We combine 2MASS, Sloan Digital Sky Survey, WISE, and PS1 astrometry to derive a preliminary parallax of 171 {+-} 45 mas (5.8{sup +2.0} {sub -1.2} pc), the first such measurement using PS1 data. The proximity and brightness of PSO J043.5+02 will facilitate future characterization of its atmosphere, variability, multiplicity, distance, and kinematics. The modest number of candidates from our search suggests that the immediate ({approx}10 pc) solar neighborhood does not contain a large reservoir of undiscovered T dwarfs earlier than about T8.

Liu, Michael C.; Deacon, Niall R.; Magnier, Eugene A.; Aller, Kimberly M.; Bowler, Brendan P.; Burgett, W. S.; Chambers, K. C.; Hodapp, K. W.; Kaiser, N.; Kudritzki, R.-P.; Morgan, J. S.; Tonry, J. L.; Wainscoat, R. J. [Institute for Astronomy, University of Hawaii, Honolulu, HI 96822 (United States); Dupuy, Trent J. [Harvard-Smithsonian Center for Astrophysics, Cambridge, MA 02138 (United States); Redstone, Joshua [Facebook, Palo Alto, CA 94304 (United States); Goldman, Bertrand [Max Planck Institute for Astronomy, D-69117 Heidelberg (Germany); Price, P. A. [Department of Astrophysical Sciences, Princeton University, Princeton, NJ 08544 (United States)

2011-10-20T23:59:59.000Z

153

Supplement Analysis for the Transmission System Vegetation Management Program FEIS (DOE/EIS-0285/SA-149-Captain Jack-Malin #1)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

8, 2003 8, 2003 REPLY TO ATTN OF: KEP-4 SUBJECT: Supplement Analysis for the Transmission System Vegetation Management Program FEIS (DOE/EIS-0285/SA-149-Captain Jack-Malin #1) Elizabeth Johnson Natural Resource Specialist - TFR/The Dalles Proposed Action: Vegetation Management for the Captain Jack-Malin #1 500 kV transmission line from structure 2/4 to Malin Substation (reference line). Right of way width averages 150 feet. Location: The project location is within Klamath County, Oregon near the city of Malin, and is within the Redmond Region. Proposed by: Bonneville Power Administration (BPA). Description of the Proposal: BPA proposes to remove unwanted vegetation along the right-of- way, access roads and around tower structures along the subject transmission line corridors.

154

Ozone and UV for Grain Milling Systems  

Science Conference Proceedings (OSTI)

Recognizing the current concerns with food safety, First Energy Services and EPRI collaborated in a project to investigate the feasibility of using ozone as a substitute for chlorinated water to control bacteria and mold at the Harvest States Amber Milling facility in Huron, Ohio. Traditionally, chlorinated water is used to control bacteria and mold in grain processing. Since chlorine usage can be costly and because chlorine presents problems in storage and safe handling of chlorine gas, the project part...

2000-12-13T23:59:59.000Z

155

YANG-MILLS THEORY FOR BUNDLE GERBES  

E-Print Network (OSTI)

Abstract. Given a bundle gerbe with connection on an oriented Riemannian manifold of dimension at least equal to 3, we formulate and study the associated Yang-Mills equations. When the Riemannian manifold is compact and oriented, we prove the existence of instanton solutions to the equations and also determine the moduli space of instantons, thus giving a complete analysis in this case. We also study duality in this context.

Varghese Mathai; David Roberts

2005-01-01T23:59:59.000Z

156

Geothermal Mill Redevelopment Project in Massachusetts  

DOE Green Energy (OSTI)

Anwelt Heritage Apartments, LLC redeveloped a 120-year old mill complex into a mixed-use development in a lower-income neighborhood in Fitchburg, Massachusetts. Construction included 84 residential apartments rented as affordable housing to persons aged 62 and older. The Department of Energy (DOE) award was used as an essential component of financing the project to include the design and installation of a 200 ton geothermal system for space heating and cooling.

Vale, A.Q.

2009-03-17T23:59:59.000Z

157

in Topological Yang-Mills Theory  

E-Print Network (OSTI)

We introduce the covariant forms for the non-Abelian anomaly counterparts in topological Yang-Mills theory, which satisfies the topological descent equation modulo terms that vanish at the space of BRST fixed points. We use the covariant anomalies as a new set of observables, which can absorb both ? W and ? BRS ghost number violations of zeromodes. Then, we study some problems due to the zero-modes originated from the reducible connections.

unknown authors

1992-01-01T23:59:59.000Z

158

Electricity generation potential of Thai sugar mills  

SciTech Connect

At present, the total installed electricity generating capacity of Thailand is 7500 MW. Because this level of investment will take an unacceptable large part of total foreign borrowing, the government plans to encourage participation of the private sector in electricity generation. Among the various technology options for power production, cogeneration appears to be the most promising technology due to its very high effectiveness of fuel utilization. Therefore, in the first phase of private power generation, the Thai government is encouraging cogeneration systems. This paper discusses sugar mills, where expertise and equipment for electricity generation already exist, appear to be in a particularly advantageous position to participate in the private power generation program. At present, there are 46 sugar mills in Thailand with a total capacity of 338,000 tons of cane per day. The fiber part delivered from the milling of sugarcane, bagasse, is normally used to produce steam for the process heat and electricity generation. The investment and operating costs for each of these alternatives have been evaluated. The internal rate of return is used to indicate the benefit of each alternative.

Therdyothin, A.; Bhattacharaya, S.C.; Chirarattananon, S. (Asian Inst. of Tech., Bangkok (Thailand))

1992-10-01T23:59:59.000Z

159

Accessibility in 5-Axis Milling Environment  

E-Print Network (OSTI)

Using algorithms from computer graphics, namely hidden line and surface removal, techniques have been constructed to derive the 3-axis visible or millable set of a computer model from a given orientation or simulate and verify machining toolpaths. In this paper, an approach that reduces the accessibility problem of 5-axis milling using a flat end tool into a 3-axis accessibility problem is discussed. Using this approach, global detection of possible gouging into other parts, while a 5-axis flat end mill is in use, is made feasible and collisions can be avoided. Key Words: NURBs, accessibility, 5-axis machining. 1 Introduction Several methods are in use, when freeform computer models are realized using milling machines. Possibly the most common approach utilizes a ball end tool with three degrees of freedom, namely translation in x, y, and z [1, 2, 4, 5, 6, 7]. The ball end center of the tool follows an offset [8] to the model by the tool radius while the ball end surface is tangent to...

Gershon Elber

1997-01-01T23:59:59.000Z

160

DOE - Office of Legacy Management -- Edgemont Mill Site - SD 01  

Office of Legacy Management (LM)

Edgemont Mill Site - SD 01 Edgemont Mill Site - SD 01 FUSRAP Considered Sites Site: Edgemont Mill Site (SD.01) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: Also see Edgemont, South Dakota, Disposal Site Documents Related to Edgemont Mill Site 2012 Annual Site Inspection and Monitoring Report for Uranium Mill Tailings Radiation Control Act Title II Disposal Sites-Edgemont, South Dakota, Disposal Site. LMS/S09415. November 2012 U.S. Department of Energy 2008 UMTRCA Title II Sites Annual Report November 2008 Edgemont, South Dakota FACT SHEET Office of Legacy Management Edgemont, South Dakota, Disposal Site This fact sheet provides information about the Uranium Mill

Note: This page contains sample records for the topic "jack wise mills" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Injection Molding of Tungsten Powder Treated by Jet Mill  

Science Conference Proceedings (OSTI)

Tungsten powder was firstly treated by jet mill, resulting in the improvement of ... and Welding Conditions of Monopile and Transition for Offshore Wind Plant.

162

Nanoestructured Altisin Coatings For Ball Helical Milling Application ...  

Science Conference Proceedings (OSTI)

Abstract Scope, The current power wind generation industry uses for its power ... In this work the behavior and improvement of tool life for ball end mills with...

163

DOE - Office of Legacy Management -- Lowman Mill Site - ID 01  

Office of Legacy Management (LM)

Radioactive Materials Handled: Radiological Survey(s): Site Status: Also see Lowman, Idaho, Disposal Site Documents Related to Lowman Mill Site Historical documents may contain...

164

Monticello Mill Tailings, Operable Unit III Surface and Ground...  

Office of Legacy Management (LM)

Action activities included millsite dewatering and treatment, initiation of a ground water management policy to prevent use Monticello Mill Tailings Site, Operable Unit III...

165

Influence of Milling Time on Microstructure and Thermoelectric ...  

Science Conference Proceedings (OSTI)

Presentation Title, Influence of Milling Time on Microstructure and Thermoelectric Properties of p-Type Bi2Te3 Alloys. Author(s), Madavali Babu, Hyo Seob Kim,...

166

(ns) Al-2024 Alloy Obtained via Cryogenic Milling  

Science Conference Proceedings (OSTI)

Milling Al-2024 powder of big particle size (>100 microns) in cryogenic regime resulted in nanostructured powder of 46 nm grain size after 18h. Furthermore...

167

A Computer Simulation of an Agitation Mill Abrasion Process for ...  

Science Conference Proceedings (OSTI)

We already confirmed that a special and selective grinding such as parts abrasion from the board using agitation mill was effective for the recycling of a part of...

168

Development and Characterization of Milled Silver Powder Addition ...  

Science Conference Proceedings (OSTI)

In order to add the milled Ag powders to granular PP feedstock two different .... Membranes Obtained from PA6/HDPE Blends Via Precipitation by Immersion.

169

Potential for reducing paper mill energy use and carbon dioxide...  

NLE Websites -- All DOE Office Websites (Extended Search)

Li Journal Applied Energy Volume 102 Date Published 022013 Keywords co2 emissions, energy audit, paper mill Abstract The pulp and paper industry is one of the most...

170

Effect of enzyme application in temper water on wheat milling.  

E-Print Network (OSTI)

??The effect of enzyme in temper water on wheat milling performance and flour quality was studied. Five independent variables, enzyme concentration, incubation time, incubation temperature, (more)

Yoo, Juhyun

2007-01-01T23:59:59.000Z

171

DOE - Office of Legacy Management -- Falls City Mill Site - TX...  

NLE Websites -- All DOE Office Websites (Extended Search)

Materials Handled: Radiological Survey(s): Site Status: Also see Falls City, Texas, Disposal Site Documents Related to Falls City Mill Site Data Validation Package for...

172

Engineering task plan for upgrades to the leveling jacks on core sample trucks number 3 and 4  

Science Conference Proceedings (OSTI)

Characterizing the waste in underground storage tanks at the Hanford Site is accomplished by obtaining a representative core sample for analysis. Core sampling is one of the numerous techniques that have been developed for use given the environmental and field conditions at the Hanford Site. Core sampling is currently accomplished using either Push Mode Core Sample Truck No.1 or; Rotary Mode Core Sample Trucks No.2, 3 or 4. Past analysis (WHC 1994) has indicated that the Core Sample Truck (CST) leveling jacks are structurally inadequate when lateral loads are applied. WHC 1994 identifies many areas where failure could occur. All these failures are based on exceeding the allowable stresses listed in the American Institute of Steel Construction (AISC) code. The mode of failure is for the outrigger attachments to the truck frame to fail resulting in dropping of the CST and possible overturning (Ref. Ziada and Hundal, 1996). Out of level deployment of the truck can exceed the code allowable stresses in the structure. Calculations have been performed to establish limits for maintaining the truck level when lifting. The calculations and the associated limits are included in appendix A. The need for future operations of the CSTS is limited. Sampling is expected to be complete in FY-2001. Since there is limited time at risk for continued use of the CSTS with the leveling controls without correcting the structural problems, there are several design changes that could give incremental improvements to the operational safety of the CSTS with limited impact on available operating time. The improvements focus on making the truck easier to control during lifting and leveling. Not all of the tasks identified in this ETP need to be performed. Each task alone can improve the safety. This engineering task plan is the management plan document for implementing the necessary additional structural analysis. Any additional changes to meet requirements of standing orders shall require a Letter of Instruction from Numatec Hanford Company (NHC).

KOSTELNIK, A.J.

1999-02-24T23:59:59.000Z

173

Engineering assessment of inactive uranium mill tailings  

SciTech Connect

The Grand Junction site has been reevaluated in order to revise the October 1977 engineering assessment of the problems resulting from the existence of radioactive uranium mill tailings at Grand Junction, Colorado. This engineering assessment has included the preparation of topographic maps, the performance of core drillings and radiometric measurements sufficient to determine areas and volumes of tailings and radiation exposures of individuals and nearby populations, the investigations of site hydrology and meteorology, and the evaluation and costing of alternative corrective actions. Radon gas released from the 1.9 million tons of tailings at the Grand Junction site constitutes the most significant environmental impact, although windblown tailings and external gamma radiation are also factors. The eight alternative actions presented herein range from millsite and off-site decontamination with the addition of 3 m of stabilization cover material (Option I), to removal of the tailings to remote disposal sites and decontamination of the tailings site (Options II through VIII). Cost estimates for the eight options range from about $10,200,000 for stabilization in-place to about $39,500,000 for disposal in the DeBeque area, at a distance of about 35 mi, using transportation by rail. If transportation to DeBeque were by truck, the cost estimated to be about $41,900,000. Three principal alternatives for the reprocessing of the Grand Junction tailings were examined: (a) heap leaching; (b) treatment at an existing mill; and (c) reprocessing at a new conventional mill constructed for tailings reprocessing. The cost of the uranium recovered would be about $200/lb by heap leach and $150/lb by conventional plant processes. The spot market price for uranium was $25/lb early in 1981. Therefore, reprocessing the tailings for uranium recovery appears not to be economically attractive.

Not Available

1981-07-01T23:59:59.000Z

174

Chapter 2: uranium mines and mills  

SciTech Connect

This chapter will be included in a larger ASCE Committee Report. Uranium mining production is split between underground and open pit mines. Mills are sized to produce yellowcake concentrate from hundreds to thousands of tons of ore per day. Miner's health and safety, and environmental protection are key concerns in design. Standards are set by the US Mine Safety and Health Administration, the EPA, NRC, DOT, the states, and national standards organizations. International guidance and standards are extensive and based on mining experience in many nations.

O'Connell, W.J.

1983-03-01T23:59:59.000Z

175

Applications of Yang-Mills thermodynamics  

Science Conference Proceedings (OSTI)

We discuss the postulate that the U(1) gauge group describing photon propagation results from a dynamically broken SU(2) gauge theory. In the context of Yang-Mills thermodynamics such a symmetry breaking occurs via the non-trivial ground state. As a result of the interaction with the quasi particles of the theory the photon acquires an effective, temperature and momentum dependent, mass. We explain how this leads to modified black body spectra at temperatures of about 5 K. Furthermore, we discuss the properties and effects of an emergent longitudinal polarization.

Schwarz, Markus [Salierstr. 10.,76137 Karlsruhe (Germany)

2012-09-26T23:59:59.000Z

176

Fundamental and effective Yang-Mills vertices  

SciTech Connect

Calorons and plane waves within and in between them collectively give rise to a thermal ground state. The latter provides a homgeneous energy density and a negative pressure, and it induces quasiparticle masses to part of the propagating spectrum of deconfining SU(2) Yang-Mills thermodynamics (dynamical gauge-symmetry breaking). In the present talk we discuss the role of a single caloron in inducing effective local vertices, characterized by powers of h, mediating the interaction of plane waves which propagate over large distances. The constraints on momentum transfers through effective 4-vertices are revisited.

Hofmann, Ralf [ITP, Universitaet Heidelberg, Philosophenweg 16, 69120 Heidelberg (Germany)

2012-09-26T23:59:59.000Z

177

Pocket Milling with Tool Engagement Detection  

E-Print Network (OSTI)

This paper presents an algorithm for generating a tool path for cutting a pocket with islands, which includes detecting when the tool is certain to be making a minimal engagement cut. Minimal engagement is defined as the amount of engagement present in peripheral milling of a flat side face of a workpiece in a straight line with constant stepover. Feed rates and spindle speeds are reset by the algorithm when machining conditions change from a minimal engagement cut to any other type of cut or vice versa.

Thomas Kramer April; Thomas R. Kramer

1992-01-01T23:59:59.000Z

178

Geometric Approaches for Reducing Burr Formation in Planar Milling by Avoiding Tool Exits  

E-Print Network (OSTI)

1999). A summary of micro-milling studies. 1st IntlT.R. (1992). Pocket milling with tool engagement detec-Burr minimization in face milling: a geometric approach.

Chu, Chih-Hsing; Dornfeld, David

2008-01-01T23:59:59.000Z

179

The Milling Stone Horizon Revisited: New Perspectives from Northern and Central California  

E-Print Network (OSTI)

Berryessa II. Journal THE MILLING STONE HORIZON REVISITEDI, pp. 67-93 (1999). The Milling Stone Horizon Revisited:nearly half a century, the Milling Stone Horizon has been

Fitzgerald, Richard T.; Jones, Terry L.

1999-01-01T23:59:59.000Z

180

Back Cutting and Tool Wear Influence on Burrs in Face Milling - Analysis and Solutions  

E-Print Network (OSTI)

of uncoated and coated milling inserts, Wear, 225/229, ppBurr Minimization in Face Milling: A Geometric Approach,System for Burr i n Face Milling, Journal of Manufacturing

Rangarajan, Arvind; Dornfeld, David A

2004-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "jack wise mills" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

A Study of Surface Roughness in the Micro-End-Milling Process  

E-Print Network (OSTI)

adaptive control of end milling operations, Proc. NAMRC-iv,generation in dynamic milling, ASME J. Eng. Ind. , 113,produced with the micro- end-milling process. Alauddin, M. ,

Lee, Kiha; Dornfeld, David A

2004-01-01T23:59:59.000Z

182

On The Face Milling Burr Formation Mechanisms and Minimization Strategies at High Tool Engagement  

E-Print Network (OSTI)

on Burr Formation in Face Milling with an Extreme PositiveBurr Formation in Face Milling, Bulletin Japan Society ofRoughness in High Speed Face Milling, 2001-2002 LMA Annual

Avila, Miguel C; Dornfeld, David A

2004-01-01T23:59:59.000Z

183

The Possibilities of Women and Men: Gender and the California Milling Stone Horizon  

E-Print Network (OSTI)

Richard 1991 Archaic Milling Cultures of the Southern SanGender and the California Milling Stone Horizon KELLY R.those subsumed under the Milling Stone Horizon, that are not

McGuire, Kelly R; Hildebrandt, William R

1994-01-01T23:59:59.000Z

184

A NEW METHOD OF PULSE-WISE SPECTRAL ANALYSIS OF GAMMA-RAY BURSTS  

SciTech Connect

Time-resolved spectral analysis, though a very promising method to understand the emission mechanism of gamma-ray bursts (GRBs), is difficult to implement in practice because of poor statistics. We present a new method for pulse-wise time-resolved spectral study of the individual pulses of GRBs, using the fact that many spectral parameters are either constants or smooth functions of time. We use this method for the two pulses of GRB 081221, the brightest GRB with separable pulses. We choose, from the literature, a set of possible models that includes the Band model, blackbody with a power law (BBPL), and a collection of blackbodies with a smoothly varying temperature profile, along with a power law (mBBPL), and two blackbodies with a power law (2BBPL). First, we perform a time-resolved study to confirm the spectral parameter variations, and then we construct the new model to perform a joint spectral fit. We find that any photospheric emission in terms of blackbodies is required mainly in the rising parts of the pulses and the falling part can be adequately explained in terms of the Band model, with the low-energy photon index within the regime of synchrotron model. Interestingly, we find that 2BBPL is comparable or sometimes even better, though marginally, than the Band model, in all episodes. Consistent results are also obtained for the brightest GRB of Fermi era-GRB 090618. We point out that the method is generic enough to test any spectral model with well-defined parameter variations.

Basak, Rupal; Rao, A. R., E-mail: rupalb@tifr.res.in, E-mail: arrao@tifr.res.in [Tata Institute of Fundamental Research, Mumbai-400005 (India)

2013-05-10T23:59:59.000Z

185

THE DISCOVERY OF Y DWARFS USING DATA FROM THE WIDE-FIELD INFRARED SURVEY EXPLORER (WISE)  

SciTech Connect

We present the discovery of seven ultracool brown dwarfs identified with the Wide-field Infrared Survey Explorer (WISE). Near-infrared spectroscopy reveals deep absorption bands of H{sub 2}O and CH{sub 4} that indicate all seven of the brown dwarfs have spectral types later than UGPS J072227.51-054031.2, the latest-type T dwarf currently known. The spectrum of WISEP J182831.08+265037.8 is distinct in that the heights of the J- and H-band peaks are approximately equal in units of f{sub {lambda}}, so we identify it as the archetypal member of the Y spectral class. The spectra of at least two of the other brown dwarfs exhibit absorption on the blue wing of the H-band peak that we tentatively ascribe to NH{sub 3}. These spectral morphological changes provide a clear transition between the T dwarfs and the Y dwarfs. In order to produce a smooth near-infrared spectral sequence across the T/Y dwarf transition, we have reclassified UGPS 0722-05 as the T9 spectral standard and tentatively assign WISEP J173835.52+273258.9 as the Y0 spectral standard. In total, six of the seven new brown dwarfs are classified as Y dwarfs: four are classified as Y0, one is classified as Y0 (pec?), and WISEP J1828+2650 is classified as >Y0. We have also compared the spectra to the model atmospheres of Marley and Saumon and infer that the brown dwarfs have effective temperatures ranging from 300 K to 500 K, making them the coldest spectroscopically confirmed brown dwarfs known to date.

Cushing, Michael C.; Mainzer, A.; Eisenhardt, Peter R. [Jet Propulsion Laboratory, California Institute of Technology, 4800 Oak Grove Drive, MS 321-520, Pasadena, CA 91109 (United States); Kirkpatrick, J. Davy; Gelino, Christopher R.; Griffith, Roger L.; Marsh, Kenneth A.; Beichman, Charles A. [Infrared Processing and Analysis Center, California Institute of Technology, Pasadena, CA 91125 (United States); Skrutskie, Michael F. [Department of Astronomy, University of Virginia, Charlottesville, VA 22904 (United States); Burgasser, Adam J. [Center for Astrophysics and Space Science, University of California San Diego, La Jolla, CA 92093 (United States); Prato, Lisa A. [Lowell Observatory, 1400 West Mars Hill Road, Flagstaff, AZ 86001 (United States); Simcoe, Robert A. [Massachusetts Institute of Technology, 77 Massachusetts Avenue, Building 37, Cambridge, MA 02139 (United States); Marley, Mark S.; Freedman, Richard S. [NASA Ames Research Center, MS 254-3, Moffett Field, CA 94035 (United States); Saumon, D. [Los Alamos National Laboratory, MS F663, Los Alamos, NM 87545 (United States); Wright, Edward L., E-mail: michael.cushing@gmail.com [Department of Physics and Astronomy, UCLA, Los Angeles, CA 90095 (United States)

2011-12-10T23:59:59.000Z

186

Uranium Mill Tailings Remedial Action Project surface project management plan  

SciTech Connect

This Project Management Plan describes the planning, systems, and organization that shall be used to manage the Uranium Mill Tailings Remedial Action Project (UMTRA). US DOE is authorized to stabilize and control surface tailings and ground water contamination at 24 inactive uranium processing sites and associated vicinity properties containing uranium mill tailings and related residual radioactive materials.

Not Available

1994-09-01T23:59:59.000Z

187

Energy Conservation in the Food Industry : Terminal Flour Mill.  

SciTech Connect

This report presents the results of an energy study that was conducted at Terminal Flour Mill in Portland, Oregon. Terminal Flour Mill is one of five food industry (SIC 20) plants that are being studied. Energy conservation measures (ECM's) are divided into two groups; operation and maintenance (O and M) measures, and equipment modification measures.

United Industries Corporation.

1985-03-01T23:59:59.000Z

188

EA-1155: Ground-water Compliance Activities at the Uranium Mill...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

5: Ground-water Compliance Activities at the Uranium Mill Tailings Site, Spook, Wyoming EA-1155: Ground-water Compliance Activities at the Uranium Mill Tailings Site, Spook,...

189

The Vertical Ball Mill for the Grinding of Calcined Petroleum Coke to ...  

Science Conference Proceedings (OSTI)

A new vertical ball ring mill concept has been developed based on the results of research on the grinding of calcined petroleum coke. Industrial vertical mills are...

190

Removal of Thiosalts using Biomass Ash from Pulp and Paper Mill ...  

Science Conference Proceedings (OSTI)

Biomass ash used in this study is collected from Corner Brook Pulp and Paper Mill, NL and Zellstoff Celgar Mill, BC and is characterized to understand the...

191

Synthesis of Sm-Fe-N Hard Magnets by Reactive Mechanical Milling  

Science Conference Proceedings (OSTI)

In this study, we have performed reactive mechanical milling on Sm2Fe17 alloy under hydrogen atmosphere. After reactive mechanical milling, the Sm2Fe17...

192

EIS-0198: Uranium Mill Tailings Remedial Action Groundwater Project |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

198: Uranium Mill Tailings Remedial Action Groundwater Project 198: Uranium Mill Tailings Remedial Action Groundwater Project EIS-0198: Uranium Mill Tailings Remedial Action Groundwater Project SUMMARY This EIS assesses the potential programmatic impacts of conducting the Ground Water Project, provides a method for determining the site-specific ground water compliance strategies, and provides data and information that can be used to prepare site-specific environmental impacts analyses more efficiently. PUBLIC COMMENT OPPORTUNITIES None available at this time. DOCUMENTS AVAILABLE FOR DOWNLOAD April 28, 1997 EIS-0198: Record of Decision Uranium Mill Tailings Remedial Action (UMTRA) Ground Water Project (April 1997) December 1, 1996 EIS-0198: Programmatic Environmental Impact Statement Uranium Mill Tailings Remedial Action (UMTRA) Ground Water Project

193

Moab Mill Tailings Removal Project Celebrates 5 Years of Success |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Mill Tailings Removal Project Celebrates 5 Years of Success Mill Tailings Removal Project Celebrates 5 Years of Success Moab Mill Tailings Removal Project Celebrates 5 Years of Success October 3, 2012 - 12:00pm Addthis Pictured here is the Moab uranium mill tailings pile. Tailings excavation and conditioning activities are seen in the foreground. The water spray is used to eliminate extracted contaminated groundwater. Pictured here is the Moab uranium mill tailings pile. Tailings excavation and conditioning activities are seen in the foreground. The water spray is used to eliminate extracted contaminated groundwater. Moab Federal Project Director Donald Metzler stands on a final cover layer of the disposal cell. Several other layers are visible behind him. Moab Federal Project Director Donald Metzler stands on a final cover layer

194

DOE - Office of Legacy Management -- Uravan Mill Site - CO 02  

Office of Legacy Management (LM)

Uravan Mill Site - CO 02 Uravan Mill Site - CO 02 FUSRAP Considered Sites Site: Uravan Mill Site (CO.02 ) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: Also see Naturita, Colorado, Processing Site Documents Related to Uravan Mill Site Data Validation Package for the July and October 2008 Water Sampling at the Naturita Processing and Disposal Sites Data Validation Report for the July 2009 Groundwater and Surface Water Sampling at the Naturita, Colorado, Processing Site; LMS/NAP/S00709; October 2009 2012 Annual Site Inspection and Monitoring Report for Uranium Mill Tailings Radiation Control Act Title I Disposal Sites-Naturita, Colorado,

195

Moab Mill Tailings Removal Project Celebrates 5 Years of Success |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Moab Mill Tailings Removal Project Celebrates 5 Years of Success Moab Mill Tailings Removal Project Celebrates 5 Years of Success Moab Mill Tailings Removal Project Celebrates 5 Years of Success October 3, 2012 - 12:00pm Addthis Pictured here is the Moab uranium mill tailings pile. Tailings excavation and conditioning activities are seen in the foreground. The water spray is used to eliminate extracted contaminated groundwater. Pictured here is the Moab uranium mill tailings pile. Tailings excavation and conditioning activities are seen in the foreground. The water spray is used to eliminate extracted contaminated groundwater. Moab Federal Project Director Donald Metzler stands on a final cover layer of the disposal cell. Several other layers are visible behind him. Moab Federal Project Director Donald Metzler stands on a final cover layer

196

Geohydrologic study of the Michigan Basin for the applicability of Jack W. McIntyre`s patented process for simultaneous gas recovery and water disposal in production wells  

Science Conference Proceedings (OSTI)

Geraghty & Miller, Inc. of Midland, Texas conducted a geohydrologic study of the Michigan Basin to evaluate the applicability of Jack McIntyre`s patented process for gas recovery and water disposal in production wells. A review of available publications was conducted to identify, (1) natural gas reservoirs which generate large quantities of gas and water, and (2) underground injection zones for produced water. Research efforts were focused on unconventional natural gas formations. The Antrim Shale is a Devonian gas shale which produces gas and large quantities of water. Total 1992 production from 2,626 wells was 74,209,916 Mcf of gas and 25,795,334 bbl of water. The Middle Devonian Dundee Limestone is a major injection zone for produced water. ``Waterless completion`` wells have been completed in the Antrim Shale for gas recovery and in the Dundee Limestone for water disposal. Jack McIntyre`s patented process has potential application for the recovery of gas from the Antrim Shale and simultaneous injection of produced water into the Dundee Limestone.

Maryn, S.

1994-03-01T23:59:59.000Z

197

Yang-Mills Propagators and QCD  

E-Print Network (OSTI)

We present a strong coupling expansion that permits to develop analysis of quantum field theory in the infrared limit. Application to a quartic massless scalar field gives a massive spectrum and the propagator in this regime. We extend the approach to a pure Yang-Mills theory obtaining analogous results. The gluon propagator is compared satisfactorily with lattice results and similarly for the spectrum. Comparison with experimental low energy spectrum of QCD supports the view that $\\sigma$ resonance is indeed a glueball. The gluon propagator we obtained is finally used to formulate a low energy Lagrangian for QCD that reduces to a Nambu-Jona-Lasinio model with all the parameters fixed by those of the full theory.

Marco Frasca

2008-07-27T23:59:59.000Z

198

Mille Lacs Energy Cooperative | Open Energy Information  

Open Energy Info (EERE)

Jump to: navigation, search Jump to: navigation, search Name Mille Lacs Energy Cooperative Place Minnesota Utility Id 12546 Utility Location Yes Ownership C NERC Location MRO NERC MRO Yes ISO MISO Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Dual Fuel Space Heating Rate Electric Combination Heating Rate Freedom Heating Rate Residential General Service Residential Green Power Energy Large Power Commercial Large Power - Industrial Industrial Light - 100 watt HPS Lighting Light - 150 watt HPS Lighting Off-Peak Energy Rate Residential Peak Shave Water Heating Rate Residential

199

Radiative Corrections in Yang-Mills thermodynamics  

Science Conference Proceedings (OSTI)

We provide arguments why the loop expansion of the pressure in the effective theory for the deconfining phase of SU(2) Yang-Mills thermodynamics is likely to terminate at a finite order despite the fact that the effective gauge coupling is large (e{>=}{radical}(8){pi}). Each order l of the expansion measures the lth power of the fraction of a typical residual action of the quantum fluctuation in one loop S{sub l} and h. Here S{sub l} rapidly decreases with l. This is demonstrated by a computation of irreducible 2-loop and 3-loop diagrams which correct the pressure of free quasiparticles radiatively. In fact, at the three-loop level, one diagram vanishes identically. By benchmarking with known 2-loop results we show that the Monte-Carlo method used to compute on the 3-loop level is reliable.

Kaviani, Dariush [IPPP, University of Durham, South Rd, Durham DH1 3LE (United Kingdom)

2011-09-22T23:59:59.000Z

200

Kieffer Paper Mill's Recycled Fiber Mill and PSI Energy's High Efficiency Motors Plan  

E-Print Network (OSTI)

The needs of electricity consumers along with the utility industry are rapidly changing. Consumers want electricity to perform more functions, improve efficiencies and help lower the cost of production, all in an environmentally responsible manner. In 1991, PSI Energy developed a comprehensive Demand-Side Management program, called Energy Matters, aimed at improving the overall end-use efficiency of its customers. Its goal is to reduce summer peak demand 120 megawatts by the summer of 1995. Kieffer Paper Mills in Brownstown, IN had a need to address the efficiency of its new, state-of-the-art pulp processing mill that it was building. With over 4,000 horsepower of process motors going into the new plant, even a modest improvement in motor efficiency would yield significant energy savings. PSI Energy was able to help Kieffer examine the economics of high efficiency motors, and through the PSI Energy High Efficiency Motors Plan encouraged Kieffer Paper Mills to purchase energy efficient motors by helping pay part of the cost differential between high efficiency and standard efficiency models.

Myers, J. A.

1993-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "jack wise mills" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

The WISE Gamma-Ray Strip Parametrization: The Nature of the Gamma-Ray Active Galactic Nuclei of Uncertain Type  

SciTech Connect

Despite the large number of discoveries made recently by Fermi, the origins of the so called unidentified {gamma}-ray sources remain unknown. The large number of these sources suggests that among them there could be a population that significantly contributes to the isotropic gamma-ray background and is therefore crucial to understand their nature. The first step toward a complete comprehension of the unidentified {gamma}-ray source population is to identify those that can be associated with blazars, the most numerous class of extragalactic sources in the {gamma}-ray sky. Recently, we discovered that blazars can be recognized and separated from other extragalactic sources using the infrared (IR) WISE satellite colors. The blazar population delineates a remarkable and distinctive region of the IR color-color space, the WISE blazar strip. In particular, the subregion delineated by the {gamma}-ray emitting blazars is even narrower and we named it as the WISE Gamma-ray Strip (WGS). In this paper we parametrize the WGS on the basis of a single parameter s that we then use to determine if {gamma}-ray Active Galactic Nuclei of the uncertain type (AGUs) detected by Fermi are consistent with the WGS and so can be considered blazar candidates. We find that 54 AGUs out of a set 60 analyzed have IR colors consistent with the WGS; only 6 AGUs are outliers. This result implies that a very high percentage (i.e., in this sample about 90%) of the AGUs detected by Fermi are indeed blazar candidates.

Massaro, F.; /SLAC; D'Abrusco, R.; /Harvard-Smithsonian Ctr. Astrophys.; Tosti, G.; /Perugia U. /INFN, Perugia; Ajello, M.; /SLAC; Gasparrini, D.; /ESRIN, Frascati; Grindlay, J.E.; Smith, Howard A.; /Harvard-Smithsonian Ctr. Astrophys.

2012-04-02T23:59:59.000Z

202

Dams, Mills, and Electric Power (Missouri) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Mills, and Electric Power (Missouri) Mills, and Electric Power (Missouri) Dams, Mills, and Electric Power (Missouri) < Back Eligibility Commercial Industrial Institutional Investor-Owned Utility Local Government Municipal/Public Utility Retail Supplier Rural Electric Cooperative State/Provincial Govt Tribal Government Utility Savings Category Water Buying & Making Electricity Home Weatherization Program Info State Missouri Program Type Siting and Permitting Provider Missouri Department of Natural Resources The Water Resources Center of the Missouri Department of Natural Resources is responsible for implementing regulations pertaining to dam and reservoir safety. Any person or corporation may erect a dam across any watercourse, provided that: (a) the entity is chartered to construct, operate and

203

Dr. Jack A. Stone  

Science Conference Proceedings (OSTI)

... Latest Publications. Weak value thermostat with 0.2 mK precision; Performing three dimensional measurements on micro-scale features using a ...

2011-10-28T23:59:59.000Z

204

Molecular Anions Jack Simons  

E-Print Network (OSTI)

make the following ansatz for the electric field in vacuum above the solid E x,t s Efs x qEr x eyiv 0

Simons, Jack

205

Young Jack Pine Site  

NLE Websites -- All DOE Office Websites (Extended Search)

NSA-YJP) The hut, tent, and dirt road from the flux tower The sun photometer on top of the hut The bottom of the YJP flux tower NSA-YJP taken at a low sun angle to show the subtle...

206

Jack Wolever Director, Design &  

E-Print Network (OSTI)

® Office Structure Par 005 / Office of Engineer Inspector General 01 *Supv Engineer Inspector General GS-15 02 Engineer Inspector General Rep GS-13 03 Administrative Officer GS-09 *The Engineer InspectorUS Army Corps of Engineers BUILDING STRONG® Mission Briefing The Engineer Inspector General #12

California at Santa Barbara, University of

207

WebWiseTclTk: A Safe-Tcl/Tk-based Toolkit Enhanced for the World Wide Web  

E-Print Network (OSTI)

The WebWiseTclTk toolkit is an enhancement of the existing feature set of Safe-Tcl and Safe-Tk that does not compromise security. The toolkit re-defines the functionality of the auto load mechanism in Tcl such that it works for packages located anywhere on the World Wide Web. It also re-introduces several commands not available in Safe-Tk such as toplevel and menu to provide a much richer feature set of Tk commands. The toolkit is written entirely in Safe-Tcl/Tk and uses the home policy for running applications as Tcl-plugins. The toolkit supports (1) creation of new Web-based Tcl applications with greatly enhanced functionality, and (2) migration of existing Tcl applications to the Web by merely writing an encapsulation script. We demonstrate the capabilities of the WebWiseTclTk toolkit by readily creating an encapsulation script for Web-based execution of the Tk Widget Demonstrations, distributed with the core Tcl/Tk.

Hemang Lavana; Franc Brglez

1998-01-01T23:59:59.000Z

208

PRELIMINARY ANALYSIS OF WISE/NEOWISE 3-BAND CRYOGENIC AND POST-CRYOGENIC OBSERVATIONS OF MAIN BELT ASTEROIDS  

Science Conference Proceedings (OSTI)

We present preliminary diameters and albedos for 13511 Main Belt asteroids (MBAs) that were observed during the 3-Band Cryo phase of the Wide-field Infrared Survey Explorer (WISE; after the outer cryogen tank was exhausted) and as part of the NEOWISE Post-Cryo Survey (after the inner cryogen tank was exhausted). With a reduced or complete loss of sensitivity in the two long wavelength channels of WISE, the uncertainty in our fitted diameters and albedos is increased to {approx}20% for diameter and {approx}40% for albedo. Diameter fits using only the 3.4 and 4.6 {mu}m channels are shown to be dependent on the literature optical H absolute magnitudes. These data allow us to increase the number of size estimates for large MBAs which have been identified as members of dynamical families. We present thermal fits for 14 asteroids previously identified as the parents of a dynamical family that were not observed during the fully cryogenic mission.

Masiero, Joseph R.; Mainzer, A. K.; Bauer, J. M.; Cabrera, M. S. [Jet Propulsion Laboratory/California Institute of Technology, 4800 Oak Grove Dr., MS 321-520, Pasadena, CA 91109 (United States); Grav, T. [Planetary Science Institute, Tucson, AZ 85719 (United States); Cutri, R. M. [Infrared Processing and Analysis Center, California Institute of Technology, Pasadena, CA 91125 (United States); Nugent, C., E-mail: Joseph.Masiero@jpl.nasa.gov [Department of Earth and Space Sciences, University of California, Los Angeles, CA 90095 (United States)

2012-11-01T23:59:59.000Z

209

Milling Machine Replacement Project (4587), 5/11/2012  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Milling Machine Replacement Projects (4587) Milling Machine Replacement Projects (4587) Program or Field Office: Y-12 Site Office Location(s) (City/County/State): Oak Ridge, Anderson County, Tennessee Proposed Action Description: Submit by E-mail The proposed action is to replace two large milling machines with two new medium sized CNC milling machines. The new machines will be connected to the digital network communication (DNC) system. Categorical Exclusion(s) Applied: 81.31 -Installation or relocation of machinery and equipment For the complete DOE National Environmental Policy Act regulations regarding categorical exclusions, including the full text of each categorical exclusion, see Subpart D of 10 CFR Part 1021. Regulatory Requirements in 10 CFR 1021.410(b): (See full text in regulation)

210

East Millinocket Mill Biomass Facility | Open Energy Information  

Open Energy Info (EERE)

Millinocket Mill Biomass Facility Millinocket Mill Biomass Facility Jump to: navigation, search Name East Millinocket Mill Biomass Facility Facility East Millinocket Mill Sector Biomass Location Penobscot County, Maine Coordinates 45.3230777°, -68.5806727° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":45.3230777,"lon":-68.5806727,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

211

DOE - Office of Legacy Management -- Marion Mill Site - CO 09  

Office of Legacy Management (LM)

Marion Mill Site - CO 09 Marion Mill Site - CO 09 FUSRAP Considered Sites Site: MARION MILL SITE (CO.09 ) Eliminated from further consideration under FUSRAP - deferred to the State of Colorado for appropriate action. Designated Name: Not Designated Alternate Name: None Location: Sugar Leaf Road , Boulder , Colorado CO.09-1 Evaluation Year: Circa 1983 CO.09-1 Site Operations: Milled and processed thorite and other rare earth ores in 1957 and 1958. Some of the thorium concentrate produced was shipped to Davison Chemical Company for further processing. CO.09-1 CO.09-3 Site Disposition: Eliminated - Site was licensed by AEC and the State of Colorado CO.09-2 CO.09-3 Radioactive Materials Handled: Yes Primary Radioactive Materials Handled: Thorium, Natural Uranium, Other Rare Earth Ores CO.09-1

212

DOE Awards Technical Assistance Contract for Moab Mill Tailings Cleanup |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Technical Assistance Contract for Moab Mill Tailings Technical Assistance Contract for Moab Mill Tailings Cleanup DOE Awards Technical Assistance Contract for Moab Mill Tailings Cleanup May 31, 2012 - 12:00pm Addthis Media Contact Bill Taylor bill.taylor@srs.gov 803-952-8564 Cincinnati-The U.S. Department of Energy (DOE) today announced the award of an $18 million small disadvantaged business contract with S&K Aerospace, LLC, of St. Ignatius, Montana to continue to provide technical assistance services for the Moab Uranium Mill Tailings Remedial Action (UMTRA) Project in Moab, Utah. The basic contract is for three years with two one-year options to extend, for a total of up to five years. S&K Aerospace, LLC, a tribal organization 8(a) small business, will assist in the Department's removal of uranium tailings at the former Atlas

213

Process for Transition of Uranium Mill Tailings Radiation Control...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Process for Transition of Uranium Mill Tailings Radiation Control Act Title II Disposal Sites to the U.S. Department of Energy Office of Legacy Management for Long-Term...

214

SU(2) Yang-Mills thermodynamics and photon physics  

E-Print Network (OSTI)

Based on quantitative predictions enabled by a nonperturbative approach to Yang-Mills thermodynamics it is explained why the physics of photon {\\sl propagation} is not unlikely rooted in pure SU(2) gauge dynamics.

Ralf Hofmann

2007-10-05T23:59:59.000Z

215

Moab Mill Tailings Removal Project Plans to Resume Train Shipments...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Plans to Resume Train Shipments in March; All of the Laid Off Workers Will Return Moab Mill Tailings Removal Project Plans to Resume Train Shipments in March; All of the Laid Off...

216

FSME Procedure Approval Termination of Uranium Milling Licenses in Agreement  

E-Print Network (OSTI)

Any changes to the procedure will be the responsibility of the FSME Procedure Contact. Copies of the FSME procedures will be available through the NRC website. Procedure Title: Termination of Uranium Milling

Robert J. Lewis; A. Duncan White; William R. Rautzen

2010-01-01T23:59:59.000Z

217

DOE Announces Preferred Alternatives For Moab, Utah, Uranium Mill Tailings  

Energy.gov (U.S. Department of Energy (DOE))

WASHINGTON, DC The U.S. Department of Energy today announced the departments preferred alternatives for remediation of the Moab, Utah, Uranium Mill Tailings Remedial Action Project Site: active...

218

A hybrid type small 5-axis CNC milling machine  

E-Print Network (OSTI)

5-axis CNC milling machines are important in a number of industries ranging from aerospace to consumer-die-mold machining because they can deliver high machining accuracy with a spindle tilting capacity. Most of these ...

Son, Seung-Kil, 1964-

2002-01-01T23:59:59.000Z

219

Analytical approach to nonperturbative Yang-Mills thermodynamics  

E-Print Network (OSTI)

An analytical and inductive approach to hot SU(N) Yang-Mills dynamics is developed. For N=2,3 pressure and energy density are pointwise compared with lattice data.

Ralf Hofmann

2003-12-03T23:59:59.000Z

220

Yank-Mills fields and hypersurface twistors  

SciTech Connect

The author establishes a one-to-one correspondence between (not necessarily self-dual) solutions of the non-abelian source-free Yang-Mills equations on Minkowski space, and pairs of cohomology classes ({gamma}), ({phi}). If O(n) is the sheaf of holomorphic sections of the n{sup th} tensor power of the hyperplane line bundle over C P{sup 1}, and g is the Lie algebra of the gauge group, ({gamma}) {var epsilon} H{sub CR}{sup 1} (PN circumflex,g) and defines a deformation C-R({gamma}) of the canonical C-R structure on a principal bundle over PN circumflex, the subset of null twistor space PN, representing unscaled null geodesics in Minkowski space. ({phi}) {var epsilon} H{sub CR({gamma})}{sup 1} (PN,O({minus}4) {direct product} g). The spin-bundle over Minkowski space is used in the construction. This bundle is foliated by a congruence of lines; each of these lines projects into a null geodesic in Minkowski space, and corresponds to a point in N. The restriction S of the spin-bundle to a spacelike hyperplane in Minkowski space is transversal to this foliation, and PN is identified with S. ({gamma}) encodes certain components of the Yang-Mills connection on S, and ({phi}) encodes the self-dual part of the field on S. They give initial values for a system of evolution equations in the spin-bundle. This system is composed by four first order ordinary differential equations along the lines in the foliation of the spin-bundle, with some of the right-hand sides given by integrals on the fiber over a point in Minkowski space, and a partial differential equation on this fiber. The evolution equations simplify largely in the case of an abelian gauge group. In the case of anti-self-dual fields, the system reduces to two ordinary differential equations along the lines in the foliation of the spin-bundle, and the differential equation on the fiber over each point in Minkowski space. He studies the modifications in the construction when sources are present.

Fioravanti, M.A.

1989-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "jack wise mills" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Replacing chemicals in recycle mills with mechanical alternatives  

DOE Green Energy (OSTI)

A high-intensity spark fired underwater decomposes a small amount of the water into hydroxyl radicals, which are strong oxidants. These are able to oxidize contaminants such as glue and wood pitch that enter paper recycling mills as a part of the incoming furnish and cost the industry several hundred million dollars. The sparking technique is safe, inexpensive, and is capable of treating large volumes of water, which makes it attractive for mill applications. Several mill trials were run. Sparking caused a decrease in the tack of the deposits in one case. Lower bleach use occurred in two other mills; sparking reduced the degree of ink reattachment to fiber. The payback for either application is attractive. Sparking induced deposition of contaminants in another mill, which is a positive development--if it can be controlled. The technique is also able to degas water and to oxidize odor-causing sulfur compounds. Although one unit has been purchased by a mill, second-order effects caused by the technology needs to be defined further before the technology can be broadly applied.

Institute of Paper Science Technology

2002-07-01T23:59:59.000Z

222

Thermal stabilization of uranium mill tailings  

SciTech Connect

The sintering of tailings at high temperatures (1200/sup 0/C) has shown promise as a conditioning approach that greatly reduces the /sup 222/Rn emanation of uranium mill tailings. The structure of thermally stabilized tailings has been appreciably altered producing a material that will have minimal management requirements and will be applicable to on-site processing and disposal. The mineralogy of untreated tailings is presented to define the structure of the original materials. Quartz predominates in most tailings samples; however, appreciable quantities of gypsum, clay, illite, or albites are found in some tailings. Samples from the Durango and Shiprock sites have plagioclase-type aluminosilicates and non-aluminum silicates as major components. The iron-rich vanadium tailings from the Salt Lake City site contain appreciable quantities of ..cap alpha..-hematite and chloroapatite. The reduction in radon emanation power and changes in mineralogy as a function of sintering temperature (500 to 1200(NiAsS) are considered possible species for consideraed. The calculated activity data of the various carbonate, sulfate and hydroxide species in the Li/sup +/Na/sup +/K/sup +//CO/sub 3/ = SO/sub 4/ = OH/sup -/ system have been combined f liquidus surfaces, and estimated error limits are given for each system. A comng payback period, but as the initial cost of the SAHPS is reduced and fuel prices increase, the payback period of a SAHPS will be shorter and could be competitive with other conventional heating/cooling systems.

Dreesen, D.R.; Williams, J.M.; Cokal, E.J.

1981-01-01T23:59:59.000Z

223

JACK DLANOS (1914-1997) BURUNDANGA OR CANTATA ANTILLANA: AN ART-MUSIC PORTRAYAL OF LUIS PALS MATOSS (1898-1959) BLACK CARIBBEAN  

E-Print Network (OSTI)

This is an analytical study of Burundanga or Cantata Antillana by Jack Dlano (1914-1997). One of Dlanos most ambitious choral-orchestral compositions, Burundanga was completed in 1989 in response to a commission from the Institute of Puerto Rican Culture and is based on Luis Pals Matoss (1898-1959) extravagant and elaborate poem Cancin festiva para ser llorada (A Festive Song to be Wept). Burundanga stands at the foreground of Puerto Rican art-music in the twentieth century. With its neoclassical language and integration of Caribbean folkloric material, it emerges as a unique reflection of the highly complex geographical, social, cultural and musical reality of Puerto Rico and the Antilles. The analysis underscores the relationships between the textual images and the musical resources employed in their setting, focusing on the compositions formal, melodic, harmonic, rhythmic, orchestrational and expressive elements. It also discerns particular methods by which the composer utilized and adapted Afro-

Daniel Alejandro Tapia-santiago

2011-01-01T23:59:59.000Z

224

Geohydrological feasibility study of the Black Warrior Basin for the potential applicability of Jack W. McIntyre`s patented process  

Science Conference Proceedings (OSTI)

Geraghty & Miller, Inc. of Midland, Texas conducted geological and hydrological feasibility studies of the potential applicability of Jack W. Mclntyre`s patented process for the recovery of natural gas from coalbed/sand formations in the Black Warrior Basin of Mississippi and Alabama through literature surveys. Methane gas from coalbeds in the Black Warrior Basin is confined to the coal fields of northern Alabama. Produced water from degasification of coalbeds is currently disposed by surface discharge. Treatment prior to discharge consists of short-term storage and in-stream dilution. Mr. Mclntyre`s process appears to be applicable to the Black Warrior Basin and could provide an environmentally sound alternative for produced water production.

Reed, P.D.

1994-03-01T23:59:59.000Z

225

Direct measures of mechanical energy for knife mill size reduction  

Science Conference Proceedings (OSTI)

Lengthy straw/stalk of biomass may not be directly fed into grinders such as hammer mills and disc refiners. Hence, biomass needs to be preprocessed using coarse grinders like a knife mill to allow for efficient feeding in refiner mills without bridging and choking. Size reduction mechanical energy was directly measured for switchgrass (Panicum virgatum L.), wheat straw (Triticum aestivum L.), and corn stover (Zea mays L.) in an instrumented knife mill. Direct power inputs were determined for different knife mill screen openings from 12.7 to 50.8 mm, rotor speeds between 250 and 500 rpm, and mass feed rates from 1 to 11 kg/min. Overall accuracy of power measurement was calculated to be 0.003 kW. Total specific energy (kWh/Mg) was defined as size reduction energy to operate mill with biomass. Effective specific energy was defined as the energy that can be assumed to reach the biomass. The difference is parasitic or no-load energy of mill. Total specific energy for switchgrass, wheat straw, and corn stover chopping increased with knife mill speed, whereas, effective specific energy decreased marginally for switchgrass and increased for wheat straw and corn stover. Total and effective specific energy decreased with an increase in screen size for all the crops studied. Total specific energy decreased with increase in mass feed rate, but effective specific energy increased for switchgrass and wheat straw, and decreased for corn stover at increased feed rate. For knife mill screen size of 25.4 mm and optimum speed of 250 rpm, optimum feed rates were 7.6, 5.8, and 4.5 kg/min for switchgrass, wheat straw, and corn stover, respectively, and the corresponding total specific energies were 7.57, 10.53, and 8.87 kWh/Mg and effective specific energies were 1.27, 1.50, and 0.24 kWh/Mg for switchgrass, wheat straw, and corn stover, respectively. Energy utilization ratios were calculated as 16.8%, 14.3%, and 2.8% for switchgrass, wheat straw, and corn stover, respectively. These data will be useful for preparing the feed material for subsequent fine grinding operations and designing new mills.

Bitra, V.S.P. [University of Tennessee; Womac, A.R. [University of Tennessee; Igathinathane, C. [Mississippi State University (MSU); Miu, P.I [University of Tennessee; Yang, Y.T. [University of Tennessee; Smith, D.R. [University of Tennessee; Chevanan, Nehru [University of Tennessee; Sokhansanj, Shahabaddine [ORNL

2009-08-01T23:59:59.000Z

226

Measuring the effects of low energy ion milling on the magnetization of Co/Pd multilayers using scanning electron microscopy with polarization analysis  

E-Print Network (OSTI)

effects of low energy ion milling on the magnetization ofchange caused by the milling. In conclusion, we demonstratednm?, on the energy of ion milling is investigated using

2010-01-01T23:59:59.000Z

227

Plasma Cupola Processing of Mill Scale: CMP Report No. 90-11  

Science Conference Proceedings (OSTI)

The objective of Phase A of the Metallurgical Waste Treatment Program was to examine the iron recovery potential from processing mill scale with the plasma-fired cupola. Four scoping tests were performed examining different mill scale feed methods; mill scale fed through the cupola top, mill scale fed through the cupola top in briquette form and mill scale fed through the cupola tuyere with and without carbon. The test results indicate that at feed levels of 20 percent mill scale, high iron oxide yields ...

1991-06-30T23:59:59.000Z

228

Topologically Massive Yang-Mills Theory and Link Invariants  

E-Print Network (OSTI)

Topologically massive Yang-Mills theory is studied in the framework of geometric quantization. This theory has a mass gap that is proportional to the topological mass m. Due to the existence of this mass gap, Yang-Mills contribution dies at very large distances compared to 1/m, leaving a pure Chern-Simons theory with level number k. In this paper, an intermediate region is studied where the distance is large enough, so the theory is almost topological, but not infinitely large, so there is still a small contribution from Yang-Mills. It is shown that, this almost topological theory consists of two copies of Chern-Simons, each with level number k/2. As m approaches infinity, they add up to give the original Chern-Simons term with level k. Also, reduction of the phase space is discussed in this limit. Then finally, a relation between the observables of topologically massive Yang-Mills theory and Chern-Simons theory is shown. This allows one to use skein relations to calculate topologically massive Yang-Mills theory observables at large but finite distances.

Tuna Yildirim

2013-11-08T23:59:59.000Z

229

Grinding media oscillation: effect on torsional vibrations in tumble mills  

E-Print Network (OSTI)

Tumble mills are hollow cylindrical shells of large diameter carrying grinding media (a combination of rock/iron ore/chemical flakes and metal balls/rods), which, upon rotation of the mill, will be ground into fine powder. These mills rotate at low speeds using a gear reduction unit and often have vibration problems. These vibration problems result in increased gear wear and occasional catastrophic failures resulting in production loss. The objective of this research is to investigate the effect of oscillation of grinding media on torsional vibrations of the mill. A theoretical model was developed to determine the oscillating frequency of the grinding media. A 12" (0.3 m) diameter tumble mill test rig was built with a 0.5 hp DC motor. The rig is tested with sand and iron bb balls to simulate the industry process application. At low volume levels the grinding media oscillates like a rigid body as compared to higher volumes. It is shown that tumbling action of grinding media causes torsional excitation and hence its effect has to be considered in torsional vibration analysis. At starting, the load on the gears is much higher due to this oscillation.

Toram, Kiran Kumar

2005-08-01T23:59:59.000Z

230

The Effect of Kinematical Parameters and Tool Geometry on Burr Height in Face Milling of Al-Si Alloys  

E-Print Network (OSTI)

Burr Formation in Face Milling, Bulletin Japan Society ofHeight and Thickness in Face Milling Operation, ASME J. ofRoughness in High Speed Face Milling, 2001-2002 LMA Annual

Avila, Miguel C.; Dornfeld, David A

2003-01-01T23:59:59.000Z

231

Biomass Burner Cogenerates Jobs and Electricity from Lumber Mill Waste |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Biomass Burner Cogenerates Jobs and Electricity from Lumber Mill Biomass Burner Cogenerates Jobs and Electricity from Lumber Mill Waste Biomass Burner Cogenerates Jobs and Electricity from Lumber Mill Waste December 6, 2011 - 3:57pm Addthis Dale and Sharon Borgford, small business owners in Stevens County, WA, break ground with Peter Goldmark, Washington State Commissioner of Public Lands. The pair brought more than 75 jobs to the area with help from DOE's State Energy Program and the U.S. Forest Service. | Photo courtesy of Washington DNR. Dale and Sharon Borgford, small business owners in Stevens County, WA, break ground with Peter Goldmark, Washington State Commissioner of Public Lands. The pair brought more than 75 jobs to the area with help from DOE's State Energy Program and the U.S. Forest Service. | Photo courtesy of

232

Moab Uranium Mill Tailings Cleanup Project Steps into Spotlight at  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Uranium Mill Tailings Cleanup Project Steps into Spotlight at Uranium Mill Tailings Cleanup Project Steps into Spotlight at International Meeting in Vienna Moab Uranium Mill Tailings Cleanup Project Steps into Spotlight at International Meeting in Vienna October 22, 2012 - 12:00pm Addthis Moab Federal Project Director Donald Metzler presents at the Uranium Mining Remediation Exchange Group meeting in Germany in September 2011. Moab Federal Project Director Donald Metzler presents at the Uranium Mining Remediation Exchange Group meeting in Germany in September 2011. Moab Federal Project Director Donald Metzler Moab Federal Project Director Donald Metzler Moab Federal Project Director Donald Metzler presents at the Uranium Mining Remediation Exchange Group meeting in Germany in September 2011. Moab Federal Project Director Donald Metzler

233

West Coast Paper Mills Ltd WCPML | Open Energy Information  

Open Energy Info (EERE)

Mills Ltd WCPML Mills Ltd WCPML Jump to: navigation, search Name West Coast Paper Mills Ltd. (WCPML) Place Dandeli, Karnataka, India Zip 581 325 Sector Biomass Product Dandeli based biomass project developers. Coordinates 15.25272°, 74.626404° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":15.25272,"lon":74.626404,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

234

City of Lake Mills, Iowa (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

Mills Mills Place Iowa Utility Id 10606 Utility Location Yes Ownership M NERC Location MRO NERC MRO Yes ISO MISO Yes Operates Generating Plant Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Commercial Commercial Commercial All Electric Commercial Industrial Electric Rate Industrial Residential Residential Average Rates Residential: $0.0988/kWh Commercial: $0.0948/kWh Industrial: $0.0786/kWh References ↑ "EIA Form EIA-861 Final Data File for 2010 - File1_a" Retrieved from "http://en.openei.org/w/index.php?title=City_of_Lake_Mills,_Iowa_(Utility_Company)&oldid=409818

235

DOE - Office of Legacy Management -- Loma Mill - CO 03  

Office of Legacy Management (LM)

Loma Mill - CO 03 Loma Mill - CO 03 FUSRAP Considered Sites Site: Loma Mill (CO.03 ) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: This site is one of a group of 77 FUSRAP considered sites for which few, if any records are available in their respective site files to provide an historical account of past operations and their relationship, if any, with MED/AEC operations. Reviews of contact lists, accountable station lists, health and safety records and other documentation of the period do not provide sufficient information to warrant further search of historical records for information on these sites. These site files remain "open" to

236

Mill Run Wind Power Project | Open Energy Information  

Open Energy Info (EERE)

Wind Power Project Wind Power Project Jump to: navigation, search Name Mill Run Wind Power Project Facility Mill Run Wind Power Project Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service Owner NextEra Energy Resources Developer Atlantic Renewable Energy Energy Purchaser Exelon Location Mill Run PA Coordinates 39.921026°, -79.388666° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":39.921026,"lon":-79.388666,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

237

Biomass Burner Cogenerates Jobs and Electricity from Lumber Mill Waste |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Biomass Burner Cogenerates Jobs and Electricity from Lumber Mill Biomass Burner Cogenerates Jobs and Electricity from Lumber Mill Waste Biomass Burner Cogenerates Jobs and Electricity from Lumber Mill Waste December 6, 2011 - 3:57pm Addthis Dale and Sharon Borgford, small business owners in Stevens County, WA, break ground with Peter Goldmark, Washington State Commissioner of Public Lands. The pair brought more than 75 jobs to the area with help from DOE's State Energy Program and the U.S. Forest Service. | Photo courtesy of Washington DNR. Dale and Sharon Borgford, small business owners in Stevens County, WA, break ground with Peter Goldmark, Washington State Commissioner of Public Lands. The pair brought more than 75 jobs to the area with help from DOE's State Energy Program and the U.S. Forest Service. | Photo courtesy of

238

Mills, Dams, and Reservoirs (Massachusetts) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

You are here You are here Home » Mills, Dams, and Reservoirs (Massachusetts) Mills, Dams, and Reservoirs (Massachusetts) < Back Eligibility Agricultural Commercial Construction Fed. Government Fuel Distributor General Public/Consumer Industrial Installer/Contractor Institutional Investor-Owned Utility Local Government Low-Income Residential Multi-Family Residential Municipal/Public Utility Nonprofit Residential Retail Supplier Rural Electric Cooperative Schools State/Provincial Govt Systems Integrator Transportation Tribal Government Utility Savings Category Water Buying & Making Electricity Home Weatherization Program Info State Massachusetts Program Type Siting and Permitting Provider Department of Conservation and Recreation This chapter of the Massachusetts General Laws outlines procedures to

239

Rockwell Automation & General Mills Teaming Profile | ENERGY STAR Buildings  

NLE Websites -- All DOE Office Websites (Extended Search)

Rockwell Automation & General Mills Teaming Profile Rockwell Automation & General Mills Teaming Profile Secondary menu About us Press room Contact Us Portfolio Manager Login Facility owners and managers Existing buildings Commercial new construction Industrial energy management Small business Service providers Service and product providers Verify applications for ENERGY STAR certification Design commercial buildings Energy efficiency program administrators Commercial and industrial program sponsors Associations State and local governments Federal agencies Tools and resources Training In This Section Campaigns Commercial building design Communications resources Energy management guidance Financial resources Portfolio Manager Products and purchasing Recognition Research and reports Service and product provider (SPP) resources

240

Advanced Modeling and Materials in Kraft Pulp Mills  

DOE Green Energy (OSTI)

This CRADA provided technical support to the Weyerhaeuser Company on a number of issues related to the performance and/or selection of materials at a number of locations in a pulp and paper mill. The studies related primarily to components for black liquor recovery boilers, but some effort was directed toward black liquor gasifiers and rolls for paper machines. The purpose of this CRADA was to assist Weyerhaeuser in the evaluation of materials exposed in various paper mill environments and to provide direction in the selection of alternate materials, when appropriate.

Keiser, J.R.; Gorog, J.P.

2002-05-15T23:59:59.000Z

Note: This page contains sample records for the topic "jack wise mills" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Hochschild and cyclic homology of Yang-Mills algebras.  

E-Print Network (OSTI)

The aim of this article is to compute the Hochschild and cyclic homology groups of Yang-Mills algebras, that have been defined by A. Connes and M. Dubois-Violette. We proceed here the study of these algebras that we have initiated in a previous article. The computation involves the use of a spectral sequence associated to the natural filtration on the enveloping algebra of the Lie Yang-Mills algebra. This filtration in provided by a Lie ideal which is free as Lie algebra.

Estanislao Herscovich; Andrea Solotar

242

Arbitrary surface flank milling of fan, compressor, and impeller blades  

SciTech Connect

It is generally conceived that a blade surface is flank millable if it can be closely approximated by a ruled surface; otherwise the slow machining process of point milling has to be employed. However, the authors have now demonstrated that the ruled surface criterion for flank milling is neither necessary nor sufficient. Furthermore, many complex arbitrary surfaces typical of the blades in fans, axial compressors, and centrifugal impellers in aviation gas turbines are actually closely flank millable and can be rendered exactly flank millable with one or more passes per surface often without sacrificing, indeed usually with gain, in performance.

Wu, C.Y. [Pratt and Whitney Canada Incorporated, Longueuil, Quebec, (Canada). Design Engineering

1995-07-01T23:59:59.000Z

243

Effect of Cryogenic Milling on the Properties of Fe-14Cr ODS Powder  

Science Conference Proceedings (OSTI)

Generally, ODS steel is produced by high energy ball milling process in order to ... The mixture of Fe and Y2O3 powder was ball milled for 10 hours at room...

244

CoNiFe Alloy Powder Synthesis by High Energy Milling  

Science Conference Proceedings (OSTI)

CoNiFe alloy powder was synthesized by high energy milling of mixtures of Co, Ni and Fe powder as a bulk processing method for producing powder. A milling...

245

Black Holes, q-Deformed 2d Yang-Mills, and Non-perturbative Topological Strings  

E-Print Network (OSTI)

Two-dimensional Yang-Mills, black holes and topologicalfor the two- dimensional black hole, Nucl. Phys. B 622 (LBNL- 56688 Black Holes, q-Deformed 2d Yang-Mills, and Non-

Aganagic, Mina

2009-01-01T23:59:59.000Z

246

The Yang-Mills theory as a massless limit of a massive nonabelian gauge model  

E-Print Network (OSTI)

A gauge invariant infrared regularization of the Yang-Mills theory applicable beyond perturbation theory is constructed.

A. A. Slavnov

2012-12-13T23:59:59.000Z

247

Three dimensional modeling and finite element simulation of a generic end mill  

Science Conference Proceedings (OSTI)

The geometry of cutting flutes and the surfaces of end mills is one of the crucial parameters affecting the quality of the machining in the case of end milling. These are usually represented by two-dimensional models. This paper describes in detail the ... Keywords: End mill, Finite element analysis, Mapping, Surface modeling, Surface patches

Puneet Tandon; Md. Rajik Khan

2009-02-01T23:59:59.000Z

248

BIOMASS AND BLACK LIQUOR GASIFIER/GAS TURBINE COGENERATION AT PULP AND PAPER MILLS  

E-Print Network (OSTI)

BIOMASS AND BLACK LIQUOR GASIFIER/GAS TURBINE COGENERATION AT PULP AND PAPER MILLS ERIC D. LARSON Milano Milan, Italy ABSTRACT Cogeneration of heat and power at kraft pulp/paper mills from on-site bioma modeling of gasifier/gas turbine pulp-mill cogeneration systemsusing gasifier designs under commercial

249

Veeco Solar Equipment formerly Mill Lane Engineering | Open Energy  

Open Energy Info (EERE)

Veeco Solar Equipment formerly Mill Lane Engineering Veeco Solar Equipment formerly Mill Lane Engineering Jump to: navigation, search Name Veeco Solar Equipment (formerly Mill Lane Engineering) Place Lowell, Massachusetts Zip 1851 Sector Solar Product Mill Lane Engineering is a privately held Massachusetts corporation that designs, builds, and integrates custom solar equipment and flexible solar panel coating systems. Coordinates 43.33937°, -88.817939° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":43.33937,"lon":-88.817939,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

250

Horizon Properties of Einstein-Yang-Mills Black Hole  

E-Print Network (OSTI)

We consider static axially symmetric Einstein-Yang-Mills black holes in the isolated horizon formalism. The mass of these hairy black holes is related to the mass of the corresponding particle-like solutions by the horizon mass. The hairy black holes violate the ``quasi-local uniqueness conjecture'', based on the horizon charges.

B. Kleihaus; J. Kunz; A. Sood; M. Wirschins

2001-10-19T23:59:59.000Z

251

Boise Inc. St. Helens Paper Mill Achieves Significant Fuel Savings  

SciTech Connect

This case study describes how the Boise Inc. paper mill in St. Helens, Oregon, achieved annual savings of approximately 154,000 MMBtu and more than $1 million after receiving a DOE Save Energy Now energy assessment and implementing recommendations to improve the efficiency of its steam system.

Not Available

2008-05-01T23:59:59.000Z

252

Uranium Mill Tailings Remedial Action (UMTRA) Project. [UMTRA project  

SciTech Connect

The mission of the Uranium Mill Tailings Remedial Action (UMTRA) Project is explicitly stated and directed in the Uranium Mill Tailings Radiation Control Act of 1978, hereinafter referred to as the Act.'' Title I of the Act authorizes the Department of Energy (DOE) to undertake remedial action at designated inactive uranium processing sites (Attachment 1 and 2) and associated vicinity properties containing uranium mill tailings and other residual radioactive materials derived from the processing site. The purpose of the remedial actions is to stabilize and control such uranium mill tailings and other residual radioactive materials in a safe and environmentally sound manner to minimize radiation health hazards to the public. The principal health hazards and environmental concerns are: the inhalation of air particulates contaminated as a result of the emanation of radon from the tailings piles and the subsequent decay of radon daughters; and the contamination of surface and groundwaters with radionuclides or other chemically toxic materials. This UMTRA Project Plan identifies the mission and objectives of the project, outlines the technical and managerial approach for achieving them, and summarizes the performance, cost, and schedule baselines which have been established to guide operational activity. Estimated cost increases by 15 percent, or if the schedule slips by six months. 4 refs.

Not Available

1989-09-01T23:59:59.000Z

253

Non-Abelian strings in supersymmetric Yang-Mills  

Science Conference Proceedings (OSTI)

I give a broad review of novel phenomena discovered in certain Yang-Mills theories: non-Abelian strings and confined monopoles. Then I explain how these phenomena allow one to study strong dynamics of gauge theories in four dimensions from two-dimensional models emerging on the string world sheet.

Shifman, M. [William I. Fine Theoretical Physics Institute, University of Minnesota, Minneapolis, MN 55455 (United States)

2012-09-26T23:59:59.000Z

254

The Whewell-Mill Debate in a Nutshell  

E-Print Network (OSTI)

agrees with Mills definition as far as it goes. Is Whewell therefore assenting to the standard concept of induction, which talks of inferring a generalization of the form All As are Bs from the premise that All observed As are Bs? Does Whewell agree, to use Mills example, that inferring All humans are mortal from the premise that John, Peter and Paul, etc., are mortal is an example of induction? The surprising answer is no. How can this be? Our reading of Whewell is that he has an entirely different understanding of the term general. For Whewell, the proposition All As are Bs is not general if it is a mere juxtaposition of particular cases (see Butts, ed., 1989, p. 163). Rather, for Whewell it is necessary that (Butts, ed., 1989, p. 47) In each inductive process, there is some general idea introduced, which is given, not by the phenomena, but by the mind. The proposition is constituted of facts and conceptions which are, bound together so as to give rise to those general propositions of which science consists (ref--see MR). For Whewell All humans are mortal is not general in the appropriate sense because there has been no conception added. Whewell insists that in every genuine induction, The

What John; Stuart Mill

2006-01-01T23:59:59.000Z

255

5-Axis Freeform Surface Milling using Piecewise Ruled Surface Approximation  

E-Print Network (OSTI)

This paper presents a 5-axis side milling scheme for freeform surfaces based on automatic piecewise ruled surface approximation. With this scheme, resulting surface finish is accurate and pleasing, and has a smaller scallop height compared to ball-end milling. The ruled surface approximation can be made arbitrarily precise resulting in an overall fast milling operation that satisfies tight tolerances, and smoother surface finish. The class of surfaces that can take advantage of this type of 5-axis milling operation includes both convex and saddle-like (hyperbolic) shapes. 1 Introduction The automatic toolpath generation for manufacturing of models consisting of freeform surfaces is a difficult problem addressed by numerous researchers [Bob85, Choi89, Choi93, Chou89, Elb93, Elb94, Fers86, Jera91, Lone87, Sait91, Spen90, Zhan86]. 3-axis machining [Bob85, Choi89, Fers86, Jera91, Lone87, Sait91, Spen90, Zhan86] is more frequently used than 4- or 5-axis machining modes. While deri...

Gershon Elber; Russ Fish

2000-01-01T23:59:59.000Z

256

PHYSICAL PARAMETERS OF ASTEROIDS ESTIMATED FROM THE WISE 3-BAND DATA AND NEOWISE POST-CRYOGENIC SURVEY  

Science Conference Proceedings (OSTI)

Enhancements to the science data processing pipeline of NASA's Wide-field Infrared Survey Explorer (WISE) mission, collectively known as NEOWISE, resulted in the detection of >158,000 minor planets in four infrared wavelengths during the fully cryogenic portion of the mission. Following the depletion of its cryogen, NASA's Planetary Science Directorate funded a four-month extension to complete the survey of the inner edge of the Main Asteroid Belt and to detect and discover near-Earth objects (NEOs). This extended survey phase, known as the NEOWISE Post-Cryogenic Survey, resulted in the detection of {approx}6500 large Main Belt asteroids and 86 NEOs in its 3.4 and 4.6 {mu}m channels. During the Post-Cryogenic Survey, NEOWISE discovered and detected a number of asteroids co-orbital with the Earth and Mars, including the first known Earth Trojan. We present preliminary thermal fits for these and other NEOs detected during the 3-Band Cryogenic and Post-Cryogenic Surveys.

Mainzer, A.; Masiero, J.; Bauer, J. [Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA 91109 (United States); Grav, T. [Planetary Science Institute, Tucson, AZ 85719 (United States); Cutri, R. M. [Infrared Processing and Analysis Center, California Institute of Technology, Pasadena, CA 91125 (United States); McMillan, R. S. [Lunar and Planetary Laboratory, University of Arizona, 1629 East University Boulevard, Tucson, AZ 85721-0092 (United States); Nugent, C. R. [Department of Earth and Space Sciences, UCLA, 595 Charles Young Drive East, Box 951567, Los Angeles, CA 90095-1567 (United States); Tholen, D. [Institute for Astronomy, University of Hawaii, 2680 Woodlawn Drive, Honolulu, HI 96822 (United States); Walker, R. [Monterey Institute for Research in Astronomy, Monterey, CA 93933 (United States); Wright, E. L., E-mail: amainzer@jpl.nasa.gov [Department of Physics and Astronomy, UCLA, P.O. Box 91547, Los Angeles, CA 90095-1547 (United States)

2012-11-20T23:59:59.000Z

257

Market Mill Dependence Pattern in the Stock Market: Multiscale Conditional Dynamics  

E-Print Network (OSTI)

Market Mill is a complex dependence pattern leading to nonlinear correlations and predictability in intraday dynamics of stock prices. The present paper puts together previous efforts to build a dynamical model reflecting the market mill asymmetries. We show that certain properties of the conditional dynamics at a single time scale result in the "elementary" market mill pattern. We discuss these properties as a mixture of trend-preserving and contrarian strategies used by market agents. Multiple time scale considerations make the resulting "composite" mill similar to the empirical market mill patterns. Multiscale model also reflects a multi-agent nature of the market.

Zaitsev, Sergey; Leonidov, Andrei; Trainin, Vladimir

2008-01-01T23:59:59.000Z

258

Beijing Jingye Bearing Manufacture for Rolling Mills Co Ltd | Open Energy  

Open Energy Info (EERE)

Jingye Bearing Manufacture for Rolling Mills Co Ltd Jingye Bearing Manufacture for Rolling Mills Co Ltd Jump to: navigation, search Name Beijing Jingye Bearing Manufacture for Rolling Mills Co Ltd Place Beijing Municipality, China Sector Wind energy Product Beijing-based wind turbine bearing maker. References Beijing Jingye Bearing Manufacture for Rolling Mills Co Ltd[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Beijing Jingye Bearing Manufacture for Rolling Mills Co Ltd is a company located in Beijing Municipality, China . References ↑ "Beijing Jingye Bearing Manufacture for Rolling Mills Co Ltd" Retrieved from "http://en.openei.org/w/index.php?title=Beijing_Jingye_Bearing_Manufacture_for_Rolling_Mills_Co_Ltd&oldid=342621

259

Abstract--Face Milling is today the most effective and productive manufacturing method for roughing and finishing large  

E-Print Network (OSTI)

Surface Roughness in Cnc Face Milling of Cobalt-Based Alloy (Stellite 6)", The International Journal

Aristomenis, Antoniadis

260

Gang Mills, New York: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

Gang Mills, New York: Energy Resources Gang Mills, New York: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 42.1461852°, -77.1116375° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":42.1461852,"lon":-77.1116375,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

Note: This page contains sample records for the topic "jack wise mills" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Roger Mills County, Oklahoma: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

Roger Mills County, Oklahoma: Energy Resources Roger Mills County, Oklahoma: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 35.616176°, -99.634135° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":35.616176,"lon":-99.634135,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

262

Wind Resource Assessment Report: Mille Lacs Indian Reservation, Minnesota  

DOE Green Energy (OSTI)

The U.S. Environmental Protection Agency (EPA) launched the RE-Powering America's Land initiative to encourage development of renewable energy on potentially contaminated land and mine sites. EPA collaborated with the U.S. Department of Energy's (DOE's) National Renewable Energy Laboratory (NREL) and the Mille Lacs Band of Chippewa Indians to evaluate the wind resource and examine the feasibility of a wind project at a contaminated site located on the Mille Lacs Indian Reservation in Minnesota. The wind monitoring effort involved the installation of a 60-m met tower and the collection of 18 months of wind data at multiple heights above the ground. This report focuses on the wind resource assessment, the estimated energy production of wind turbines, and an assessment of the economic feasibility of a potential wind project sited this site.

Jimenez, A. C.

2013-12-01T23:59:59.000Z

263

Anderson Mill, Texas: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

Anderson Mill, Texas: Energy Resources Anderson Mill, Texas: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 30.4549224°, -97.8058432° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":30.4549224,"lon":-97.8058432,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

264

Kemp Mill, Maryland: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

Kemp Mill, Maryland: Energy Resources Kemp Mill, Maryland: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 39.0389982°, -77.0191436° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":39.0389982,"lon":-77.0191436,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

265

Mills County, Iowa: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

Mills County, Iowa: Energy Resources Mills County, Iowa: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 41.0624496°, -95.6457951° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":41.0624496,"lon":-95.6457951,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

266

Mille Lacs County, Minnesota: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

Mille Lacs County, Minnesota: Energy Resources Mille Lacs County, Minnesota: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 45.9228403°, -93.6218744° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":45.9228403,"lon":-93.6218744,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

267

DOE/EA-1155 Uranium Mill Tailing Remedial Action Project  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

55 55 Uranium Mill Tailing Remedial Action Project Environmental Assessment of Ground- Water Compliance Activities At the Uranium Mill Tailings Site Spook, Wyoming February 1997 Prepared by U.S. Department of Energy Albuquerque Operations Office Grand Junction Office This page intentionally blank : illegible Portions of tbis DISCLAIMER document may be in electronic image products. Images are produced fiom the best available original dOClMXlf?IlL DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, make any warranty, express or implied, or assumes any legal liabili- ty or responsibility for the accuracy, completeness,

268

Cedar Mill, Oregon: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

Mill, Oregon: Energy Resources Mill, Oregon: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 45.5048397°, -122.7984325° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":45.5048397,"lon":-122.7984325,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

269

Uranium Mill Tailings Remedial Action Project (UMTRAP) Public Participation Plan  

SciTech Connect

The purpose of this Public Participation Plan is to explain the Department of Energy`s plan for involving the public in the decision-making process related to the Uranium Mill Tailings Remedial Action (UMTRA) Project. This project was authorized by Congress in the Uranium Mill Tailings Radiation Control Act of 1978. The Act provides for a cooperative effort with affected states and Indian tribes for the eventual cleanup of abandoned or inactive uranium mill tailings sites, which are located in nine western states and in Pennsylvania. Section 111 of the Act states, ``in carrying out the provisions of this title, including the designation of processing sites, establishing priorities for such sites, the selection of remedial actions and the execution of cooperative agreements, the Secretary (of Energy), the Administrator (of the Environmental Protection Agency), and the (Nuclear Regulatory) Commission shall encourage public participation and, where appropriate, the Secretary shall hold public hearings relative to such matters in the States where processing sites and disposal sites are located.`` The objective of this document is to show when, where, and how the public will be involved in this project.

NONE

1981-05-01T23:59:59.000Z

270

GridWise Alliance  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

GRIDWISE GRIDWISE ® ALLIANCE Advocating for a smarter grid Federal Utility Partnership Working Group Biloxi, MS May 5, 2009 THE GRIDWISE ALLIANCE Formed in September 2003 Committed to increasing knowledge among industry stakeholders, promoting understanding of the roles, benefits, and costs, and supporting RD&D initiatives and public- private partnerships. THE ALLIANCE OUR CURRENT MEMBERSHIP 83 members represent a broad cross-section of energy and electricity industry stakeholders Also forming strategic partnerships with organizations and government entities Financial 2.6% Analysts 2.6% Organizations 2.6% Consultants 6.4% Utilities 20.5% Software 11.5% Large Technology 23.1% Small Technology 23.1% Academia 6.4% Renewables 1.3% OUR MEMBERS (as of April 2, 2009) * 3TIER * ABB

271

Bioenergy Pumps New Life into Pulp and Paper Mills | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Bioenergy Pumps New Life into Pulp and Paper Mills Bioenergy Pumps New Life into Pulp and Paper Mills Bioenergy Pumps New Life into Pulp and Paper Mills December 13, 2011 - 4:12pm Addthis Old Town Fuel and Fiber, a former pulp mill, converts a portion of the wood chips used to make pulp to biofuels. | Energy Department photo. Old Town Fuel and Fiber, a former pulp mill, converts a portion of the wood chips used to make pulp to biofuels. | Energy Department photo. Neil Rossmeissl General Engineer What does this project do? Breathes new life into shuttered factories and mills. Saves and creates jobs. Despite Americans' voracious appetite for paper products -- a staggering 700 pounds per person annually -- America's pulp and paper industry has been struggling as of late due to competition from countries where

272

CLEANING UP MILL TAILINGS AND GROUND WATER AT THE MOAB UMTRA PROJECT SITE |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CLEANING UP MILL TAILINGS AND GROUND WATER AT THE MOAB UMTRA CLEANING UP MILL TAILINGS AND GROUND WATER AT THE MOAB UMTRA PROJECT SITE CLEANING UP MILL TAILINGS AND GROUND WATER AT THE MOAB UMTRA PROJECT SITE August 2, 2010 - 12:00pm Addthis A sheep’s foot roller compacts the tailings in the disposal cell. A sheep's foot roller compacts the tailings in the disposal cell. Moab, UT MILL TAILINGS REMOVAL Sixteen million tons of uranium mill tailings 80 feet high stood on the banks of the Colorado River near Moab in southeast Utah, as a legacy to the former ore-processing site that operated for nearly three decades beginning in the mid-1950s. That is until April 2009, when the U.S. Department of Energy began moving the tailings by rail to an engineered disposal cell constructed 30 miles north near Crescent Junction, Utah. The mill tailings,

273

6 Million Tons of Mill Tailings Removed From DOE Moab Project Site |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

6 Million Tons of Mill Tailings Removed From DOE Moab Project Site 6 Million Tons of Mill Tailings Removed From DOE Moab Project Site 6 Million Tons of Mill Tailings Removed From DOE Moab Project Site June 18, 2013 - 12:00pm Addthis Media Contacts Donald Metzler, Moab Federal Project Director (970) 257-2115 Wendee Ryan, S&K Aerospace Public Affairs Manager (970) 257-2145 (Grand Junction, CO) - Today, the Department of Energy (DOE) announced that 6 million tons of uranium mill tailings have been shipped from Moab, Utah, under the Uranium Mill Tailings Remedial Action Project to an engineered disposal cell near Crescent Junction, Utah. The shipments mark continued progress toward relocating the 16-million-ton uranium mill tailings pile away from the Colorado River. "The federal budget continues to be stretched thin, and I am proud this

274

6 Million Tons of Mill Tailings Removed From DOE Moab Project Site |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

6 Million Tons of Mill Tailings Removed From DOE Moab Project Site 6 Million Tons of Mill Tailings Removed From DOE Moab Project Site 6 Million Tons of Mill Tailings Removed From DOE Moab Project Site June 18, 2013 - 12:00pm Addthis Media Contacts Donald Metzler, Moab Federal Project Director (970) 257-2115 Wendee Ryan, S&K Aerospace Public Affairs Manager (970) 257-2145 (Grand Junction, CO) - Today, the Department of Energy (DOE) announced that 6 million tons of uranium mill tailings have been shipped from Moab, Utah, under the Uranium Mill Tailings Remedial Action Project to an engineered disposal cell near Crescent Junction, Utah. The shipments mark continued progress toward relocating the 16-million-ton uranium mill tailings pile away from the Colorado River. "The federal budget continues to be stretched thin, and I am proud this

275

DOE - Office of Legacy Management -- Tuba City Mill Site - AZ 0-02  

Office of Legacy Management (LM)

Mill Site - AZ 0-02 Mill Site - AZ 0-02 FUSRAP Considered Sites Site: Tuba City Mill Site (AZ.0-02 ) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: Also see Tuba City, Arizona, Disposal Site Documents Related to Tuba City Mill Site 2012 Annual Site Inspection and Monitoring Report for Uranium Mill Tailings Radiation Control Act Title I Disposal Sites-Tuba City, Arizona, Disposal Site. LMS/S09461. February 2013 2008 UMTRCA Title I Annual Report January 2009 Tuba City, Arizona February 2009 Groundwater and Surface Water Sampling at the Tuba City, Arizona Disposal Site May 2009 This fact sheet provides information about the Uranium Mill Tailings

276

EA-1155: Ground-water Compliance Activities at the Uranium Mill Tailings  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

5: Ground-water Compliance Activities at the Uranium Mill 5: Ground-water Compliance Activities at the Uranium Mill Tailings Site, Spook, Wyoming EA-1155: Ground-water Compliance Activities at the Uranium Mill Tailings Site, Spook, Wyoming SUMMARY This EA evaluates the environmental impacts for the proposal to comply with the Environmental Protection Agency's ground-water standards set forth in 40 CFR 192 at the Spook, Wyoming Uranium Mill Tailings Site by using the selected alternative stated in the Final Programmatic Environmental Impact Statement for the Uranium Mill Tailings Remedial Action Ground Water Project. PUBLIC COMMENT OPPORTUNITIES None available at this time. DOCUMENTS AVAILABLE FOR DOWNLOAD March 1, 1997 EA-1155: Final Environmental Assessment Ground-water Compliance Activities at the Uranium Mill Tailings Site,

277

Moab Project Disposes 2 Million Tons of Uranium Mill Tailings with Recovery  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Moab Project Disposes 2 Million Tons of Uranium Mill Tailings with Moab Project Disposes 2 Million Tons of Uranium Mill Tailings with Recovery Act Funds Moab Project Disposes 2 Million Tons of Uranium Mill Tailings with Recovery Act Funds The Moab Uranium Mill Tailings Remedial Action Project reached its primary American Recovery and Reinvestment Act milestone ahead of schedule on Wednesday with the disposal of 2 million tons of uranium mill tailings. The project had originally planned to ship 2 million tons of tailings with Recovery Act funds. Now, Recovery Act workers are surpassing that goal. Moab Project Disposes 2 Million Tons of Uranium Mill Tailings with Recovery Act Funds More Documents & Publications EIS-0355: Record of Decision EIS-0355: Draft Environmental Impact Statement EIS-0355: Final Environmental Impact Statement

278

Bioenergy Pumps New Life into Pulp and Paper Mills | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Bioenergy Pumps New Life into Pulp and Paper Mills Bioenergy Pumps New Life into Pulp and Paper Mills Bioenergy Pumps New Life into Pulp and Paper Mills December 13, 2011 - 4:12pm Addthis Old Town Fuel and Fiber, a former pulp mill, converts a portion of the wood chips used to make pulp to biofuels. | Energy Department photo. Old Town Fuel and Fiber, a former pulp mill, converts a portion of the wood chips used to make pulp to biofuels. | Energy Department photo. Neil Rossmeissl General Engineer What does this project do? Breathes new life into shuttered factories and mills. Saves and creates jobs. Despite Americans' voracious appetite for paper products -- a staggering 700 pounds per person annually -- America's pulp and paper industry has been struggling as of late due to competition from countries where

279

Low energy milling method, low crystallinity alloy, and negative electrode composition  

DOE Patents (OSTI)

A method of making nanostructured alloy particles includes milling a millbase in a pebble mill containing milling media. The millbase comprises: (i) silicon, and (ii) at least one of carbon or a transition metal, and wherein the nanostructured alloy particles are substantially free of crystalline domains greater than 50 nanometers in size. A method of making a negative electrode composition for a lithium ion battery including the nanostructured alloy particles is also disclosed.

Le, Dihn B; Obrovac, Mark N; Kube, Robert Y; Landucci, James R

2012-10-16T23:59:59.000Z

280

Minimizing Process Energy Use for a Large TMP Mill With Pinch Technology  

Science Conference Proceedings (OSTI)

American Process Inc. conducted an energy targeting scoping study for a large thermomechanical pulping (TMP) mill, using Pinch analysis. The mill produces bleached, unbleached, and semibleached kraft market pulp and standard and offset newsprint. Operations are supported by steam raised in the recovery boiler and in the power boilers. Oil and hog fuels are used in the power boilers. Some power is generated on site and also purchased. The study concentrated on identifying the steps necessary for the mill ...

2000-10-31T23:59:59.000Z

Note: This page contains sample records for the topic "jack wise mills" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Diffraction Analysis of Ball Milled Platinum Based Powders (Pt-ZrO2)  

Science Conference Proceedings (OSTI)

... series of powder samples with different amount of ZrO2 and ball milling time were examined by the synchrotron radiation at Brookhaven National Laboratory.

282

Pretreatment of Pulp Mill Wastewater Treatment Residues to Improve Their Anaerobic Digestion.  

E-Print Network (OSTI)

??Anaerobic digestion of excess biological wastewater treatment sludge (WAS) from pulp mills has the potential to reduce disposal costs and to generate energy through biogas (more)

Wood, Nicholas

2009-01-01T23:59:59.000Z

283

Phase evolution in carbide dispersion strengthened nanostructured copper composite by high energy ball milling  

Science Conference Proceedings (OSTI)

In this study, high-energy ball milling was applied to synthesis in situ nanostructured copper based composite reinforced with metal carbides. Cu, M (M=W or Ti) and graphite powder mixture were mechanically alloyed for various milling time in a planetary ball mill with composition of Cu-20vol%WC and Cu-20vol%TiC. Then the as-milled powder were compacted at 200 to 400 MPa and sintered in a vacuum furnace at 900 Degree-Sign C. The results of X-ray diffraction, scanning electron microscopy and energy dispersive spectroscopy analysis showed that formation of tungsten carbides (W{sub 2}C and WC phases) was observed after sintering of Cu-W-C mixture while TiC precipitated in as-milled powder of Cu-Ti-C composite after 5 h and become amorphous with longer milling. Mechanism of MA explained the cold welding and fracturing event during milling. Cu-W-C system shows fracturing event is more dominant at early stage of milling and W particle still existed after milling up to 60 h. While in Cu-Ti-C system, cold welding is more dominant and all Ti particles dissolved into Cu matrix.

Hussain, Zuhailawati; Nur Hawadah, M. S. [School of Materials and Mineral Resources Engineering, Engineering Campus, Universiti Sains Malaysia, 14300 Nibong Tebal, Penang (Malaysia)

2012-09-06T23:59:59.000Z

284

Analysing the potential for steam savings in TMP mills using the HLMPP tool.  

E-Print Network (OSTI)

??Thermo mechanical pulp (TMP) mills are large consumers of both steam and electricity. Large energy savings can be achieved through investments in thermal process integration (more)

Michel, Grgory

2010-01-01T23:59:59.000Z

285

Energy Consumption Characterization and Reduction Strategies for Milling Machine Tool Use  

E-Print Network (OSTI)

Cutting Condition on Power Consumption of Machine Tools, in:Energy Consumption Characterization and Reduction Strategiesand reducing the energy consumption of milling machine tools

Diaz, Nancy; E. Redelsheimer; Dornfeld, David

2011-01-01T23:59:59.000Z

286

Synthesis of Ti/TiC Composites by Mechanical Milling Followed by ...  

Science Conference Proceedings (OSTI)

carbon nanotubes were subjected to high energy ball milling followed by spark plasma sintering (SPS) to synthesize Ti composite reinforced with in-situ formed...

287

Energy Consumption Characterization and Reduction Strategies for Milling Machine Tool Use  

E-Print Network (OSTI)

Energy Consumption Characterization and Reduction Strategiesand reducing the energy consumption of milling machine toolsGreen Machine Tools; Energy Consumption Reduction; Specific

Diaz, Nancy; E. Redelsheimer; Dornfeld, David

2011-01-01T23:59:59.000Z

288

Sweet-Talking the Climate? Evaluating Sugar Mill Cogeneration and Climate Change Financing in India  

E-Print Network (OSTI)

and the high price of biomass,papermillsarepayingonlyaslongasthepriceofbiomassremains high. A

Ranganathan, Malini; Haya, Barbara; Kirpekar, Sujit

2005-01-01T23:59:59.000Z

289

Developing a generic hazard analysis critical control point (HACCP) system for the wheat milling industry.  

E-Print Network (OSTI)

??In South Africa there is a need within the milling industry for controlling food safety especially due to customer's demands and government's regulations. The best (more)

Gillion, Lauren

2005-01-01T23:59:59.000Z

290

Damaged starch in the flour mill: how to reduce the electricity bill.  

E-Print Network (OSTI)

??The purpose of the research reported in the thesis, here, is to quantify new value added possible in flour milling with the use of the (more)

Loubersac Dhotel, Charles

2012-01-01T23:59:59.000Z

291

Investigation and design of wet-mill equipment and process technology.  

E-Print Network (OSTI)

??need to dry-mill the wheat into flour, and as a result, the total cost of conversion from wheat to bread is reduced. The resulting product (more)

Smith, Lisa Noelle.

2003-01-01T23:59:59.000Z

292

Changing patterns of flour-milling in the South Island, 1840-1973.  

E-Print Network (OSTI)

??Soon after the first permanent colonists came to the South Island the first flour-mills were established to produce flour for the needs of the population. (more)

Wright, Murray John

1973-01-01T23:59:59.000Z

293

Benefits of flour storage as related to process efficiencies in milling.  

E-Print Network (OSTI)

??The milling of wheat into white flour is a high volume, low margin business. Flour is a commodity. Competition is fierce. Over the past several (more)

Johnson, Brent S.

2012-01-01T23:59:59.000Z

294

Nanocrystalline non-stoichiometric SBT: Effect of milling duration on structural and electrical characteristics  

Science Conference Proceedings (OSTI)

In the present work, nanocrystalline specimens of non-stoichiometric Strontium Bismuth Tantalate (SBT) ferroelectric ceramics were synthesized by mechanical activation process using a high energy planetary ball mill. The powders were milled for different milling durations (5, 10, 20 h) keeping the milling speed fixed at 300 rpm. Microstructural characterizations have been performed using X-ray diffraction, scanning electron microscopy, electron diffraction and transmission electron microscopy. Nanocrystallites with average grain size in the range of 30-50 nm are observed to be formed. Grain size is observed to decrease with increasing milling duration. Detailed dielectric study as a function of temperature has been carried out. It is observed that dielectric constant increases and dielectric loss decreases with increasing milling duration. The observed characteristics have been explained in terms of increased number of grain boundaries due to the reduction of granular size. - Highlights: Black-Right-Pointing-Pointer In the present work nano crystalline non-stoichiometric SBT has been synthesized. Black-Right-Pointing-Pointer The technique involved is mechanical activation (high energy ball milling). Black-Right-Pointing-Pointer The milling duration has been optimized. Black-Right-Pointing-Pointer Sr0.8Bi2.2Ta2O9 milled for 20 hours exhibit enhanced electrical characteristics.

Sugandha, E-mail: miglani.sugandha@gmail.com [Thin Film and Material Science Laboratory, Department of Applied Physics, Delhi Technological University (Formerly Delhi College of Engineering), Delhi-110042 (India); Jha, A.K., E-mail: Prof.akjha@gmail.com [Thin Film and Material Science Laboratory, Department of Applied Physics, Delhi Technological University (Formerly Delhi College of Engineering), Delhi-110042 (India); Department of Applied Sciences, Ambedkar Institute of Technology, GGSIPU, Geeta Colony, Delhi-110092 (India)

2012-03-15T23:59:59.000Z

295

Mine-to-Mill Optimization of Aggregate Production  

Science Conference Proceedings (OSTI)

Mine-to-Mill optimization is a total systems approach to the reduction of energy and cost in mining and mineral processing operations. Developed at the Julius Krutschnitt Mineral Research Centre (JKMRC) in Queensland, Australia, the Mine-to-Mill approach attempts to minimize energy consumption through the optimization of all steps in the size reduction process. The approach involves sampling and modeling of blasting and processing, followed by computer simulation to optimize the operation and develop alternatives. The most promising alternatives are implemented, and sampling is conducted to quantify energy savings. In the current project, the primary objective is to adapt the JKMRC Mine-to-Mill technology to the aggregates industry. The second phase of this project is being carried out at the Pittsboro Quarry located south of Chapel Hill, North Carolina. This quarry is owned by 3M Corporation and operated by Luck Stone. Based on lessons learned from the first phase work, long-term monitoring ({approx} three months) of all quarry operations is being carried out to minimize the impact of geological changes during the mining process. To date, the blasting and processing operations have been audited and modeled, the long-term monitoring of current Luck Stone practice has been completed, and a modified blasting approach has been implemented based on the results of simulations using JKSimBlast and JKSimPlant. The modified blasting approach is expected to increase the primary throughput by 15% and the secondary throughput by approximately 6%, with an overall specific energy reduction of around 1%. Long-term monitoring is currently underway to evaluate the impact the modified blasting approach. This report summarizes the current status of work at the Pittsboro Quarry.

Greg Adel; Toni Kojovic; Darren Thornton

2006-06-01T23:59:59.000Z

296

Uranium Mill Tailings Remedial Action Project. 1995 Environmental Report  

SciTech Connect

In accordance with U.S. Department of Energy (DOE) Order 23 1. 1, Environment, Safety and Health Reporting, the DOE prepares an annual report to document the activities of the Uranium Mill Tailings Remedial Action (UMTRA) Project environmental monitoring program. This monitoring must comply with appropriate laws, regulations, and standards, and it must identify apparent and meaningful trends in monitoring results. The results of all monitoring activities must be communicated to the public. The UMTRA Project has prepared annual environmental reports to the public since 1989.

NONE

1996-06-01T23:59:59.000Z

297

Stabilizing perturbative Yang-Mills thermodynamics with Gribov quantization  

E-Print Network (OSTI)

We evaluate the thermodynamic quantities of Yang-Mills theory using the Gribov quantization, which deals with nonperturbative resummation. The magnetic scale is automatically incorporated into the framework and we find it efficient to stabilize the perturbative expansion of the free energy. In the temperature range $T=T_c \\sim 2\\,T_c$ the major uncertainty in our results comes from the nonperturbative running coupling that is adopted from the lattice simulation, while the convergence above $2\\,T_c$ is impressively robust. We also present the corresponding interaction measure (i.e., trace anomaly) up to close to $T_c$.

Kenji Fukushima; Nan Su

2013-04-30T23:59:59.000Z

298

Uranium Mill Tailings Remedial Action Project environmental protection implementation plan  

Science Conference Proceedings (OSTI)

The Uranium Mill Tailings Remedial Action (UMTRA) Project Environmental Protection Implementation Plan (EPIP) has been prepared in accordance with the requirements of the U.S. Department of Energy (DOE) Order 5400.1. The UMTRA EPIP is updated annually. This version covers the time period of 9 November 1994, through 8 November 1995. Its purpose is to provide management direction to ensure that the UMTRA Project is operated and managed in a manner that will protect, maintain, and where necessary, restore environmental quality, minimize potential threats to public health and the environment, and comply with environmental regulations and DOE policies.

Not Available

1994-10-01T23:59:59.000Z

299

Fusion hierarchies for N = 4 superYang-Mills theory  

E-Print Network (OSTI)

We employ the analytic Bethe Anzats to construct eigenvalues of transfer matrices with finite-dimensional atypical representations in the auxiliary space for the putative long-range spin chain encoding anomalous dimensions of all composite single-trace gauge invariant operators of the maximally supersymmetric Yang-Mills theory. They obey an infinite fusion hierarchy which can be reduced to a finite set of integral relations for a minimal set of transfer matrices. This set is used to derive a finite systems of functional equations for eigenvalues of nested Baxter polynomials.

A. V. Belitsky

2008-03-13T23:59:59.000Z

300

Tool fabrication system for micro/nano millingfunction analysis and design of a six-axis Wire EDM machine  

E-Print Network (OSTI)

system for micro/nano millingfunction analysis and designcan only be fabricated by milling operations instead ofprocesses with ultra-hard milling tools made of PCD or CBN.

Cheng, X.; Wang, Z. G.; Kobayashi, S.; Nakamoto, K.; Yamazaki, K.

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "jack wise mills" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Energy efficiency improvement and cost saving opportunities for the Corn Wet Milling Industry: An ENERGY STAR Guide for Energy and Plant Managers  

E-Print Network (OSTI)

1991). Energy from a Flour Mill Waste Water. Case study CA-Variable Speed Drives on a Flour Mill Extract Fan. AvailableCOD/m 3 /day. Ogilvie flour mills use an anaerobic treatment

Galitsky, Christina; Worrell, Ernst; Ruth, Michael

2003-01-01T23:59:59.000Z

302

Biorefinery Concept Development Based on Wheat Flour Milling  

SciTech Connect

We are developing an innovative process for the recovery of a starch-rich product from millfeed (the low-value byproduct of wheat flour milling); enzymatic processing of the starch to glucose; and the subsequent processes for conversion of that glucose into a value-added product by either a catalytic or a fermentation process. We have completed the development of the starch recovery step with enzymatic processing and the assessment of its economic viability. The processes to use the glucose product as feedstock for catalytic processing and fermentation processing have been tested in the laboratory. Catalytic processing of the glucose from the extracted starch for polyol production is based on catalytic hydrogenation to sorbitol. Alternatively, fermentation of the extracted starch-derived glucose also provides a pathway to value-added chemical products via a platform chemical, lactic acid. The paper includes results from all the processing areas addressed. Starch extraction and glucose generation from wheat milling byproducts are presented with laboratory and scaled-up processing results. Results of fermentation of the glucose product to lactic acid in shaker flask tests are presented, documenting the minimal requirements for nutrient addition. Stirred batch reactor tests of catalytic hydrogenation of the glucose product to sorbitol are presented with a discussion of contaminant effects on the catalyst.

Elliott, Douglas C.; Orth, Rick J.; Werpy, Todd A.; Gao, Johnway; Eakin, David E.; Schmidt, Andrew J.; Neuenschwander, Gary G.; Murry, J; Flagg, Anthony; Lahman, L; Mennel, D; Lin, C J.; Landucci, Ron; Crockett, John; Peterson, Charles L.

2002-09-22T23:59:59.000Z

303

Opportunities for Utility-Owned CHP at Dry-Mill Fuel Ethanol Plants  

Science Conference Proceedings (OSTI)

This report quantifies opportunities to co-locate natural-gas-fueled combined heat and power (CHP) facilities with corn dry-mill fuel ethanol plants in the upper Midwest. It also evaluates the opportunity to generate renewable power by fueling the CHP plants with biogas produced by anaerobic digestion of the byproducts of the corn wet-milling process.

2008-09-23T23:59:59.000Z

304

Color Removal from Pulp Mill Effluent Using Coal Ash Produced from Georgia Coal Combustion Power Plants  

E-Print Network (OSTI)

Color Removal from Pulp Mill Effluent Using Coal Ash Produced from Georgia Coal Combustion Power color from pulp mill effluent using coal ash. Prevent coal ash adsorbent from leaching arsenic, chromium, lead, and zinc. Define a treatment procedure using coal ash that will result in the maximum

Hutcheon, James M.

305

Results of a Coal Pile and Mill Rejects Investigation at a Power Generating Station  

Science Conference Proceedings (OSTI)

Besides coal piles, coal-fired power plants may have various by-products, such as mill rejects, fly ash, and bottom ash that must be managed on plant property. This report presents the results of data analyses and groundwater modeling to evaluate potential management options for coal piles and mill rejects at one such site.

1997-07-08T23:59:59.000Z

306

Application of Particle Swarm Optimization technique for achieving desired milled surface roughness in minimum machining time  

Science Conference Proceedings (OSTI)

Face milling is a widely used machining operation to produce various components. The finished component depends not only on the dimensional accuracy but also on the surface finish. The present method of selection of machining parameters by trial and ... Keywords: Face milling, Machining parameters, Machining time, Particle Swarm Optimization, Surface roughness

S. Bharathi Raja; N. Baskar

2012-04-01T23:59:59.000Z

307

Modeling and adaptive force control of milling by using artificial techniques  

Science Conference Proceedings (OSTI)

The contribution discusses the use of combining the methods of neural networks, fuzzy logic and PSO evolutionary strategy in modeling and adaptively controlling the process of ball-end milling. On the basis of the hybrid process modeling, off-line optimization ... Keywords: Adaptive force control, End-milling, Hybrid modeling, Neural networks

U. Zuperl; F. Cus; M. Reibenschuh

2012-10-01T23:59:59.000Z

308

Moab Mill Tailings Pile 25 Percent Disposed: DOE Moab Project Reaches  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Mill Tailings Pile 25 Percent Disposed: DOE Moab Project Mill Tailings Pile 25 Percent Disposed: DOE Moab Project Reaches Significant Milestone Moab Mill Tailings Pile 25 Percent Disposed: DOE Moab Project Reaches Significant Milestone June 3, 2011 - 12:00pm Addthis Media Contacts Donald Metzler Moab Federal Project Director (970) 257-2115 Wendee Ryan S&K Aerospace Public Affairs Manager (970) 257-2145 Grand Junction, CO - One quarter of the uranium mill tailings pile located in Moab, Utah, has been relocated to the Crescent Junction, Utah, site for permanent disposal. Four million tons of the 16 million tons total has been relocated under the Uranium Mill Tailings Remedial Action Project managed by the U.S. Department of Energy (DOE). A little over 2 years ago, Remedial Action Contractor EnergySolutions began

309

Process for Transition of Uranium Mill Tailings Radiation Control Act Title  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Uranium Mill Tailings Radiation Control Uranium Mill Tailings Radiation Control Act Title II Disposal Sites to the U.S. Department of Energy Office of Legacy Management for Long-Term Surveillance and Maintenance Process for Transition of Uranium Mill Tailings Radiation Control Act Title II Disposal Sites to the U.S. Department of Energy Office of Legacy Management for Long-Term Surveillance and Maintenance Process for Transition of Uranium Mill Tailings Radiation Control Act Title II Disposal Sites to the U.S. Department of Energy Office of Legacy Management for Long-Term Surveillance and Maintenance (March 2012) Process for Transition of Uranium Mill Tailings Radiation Control Act Title II Disposal Sites to the U.S. Department of Energy Office of Legacy Management for Long-Term Surveillance and Maintenance (March 2012)

310

DOE - Office of Legacy Management -- Slick Rock Mill Site - CO 08  

NLE Websites -- All DOE Office Websites (Extended Search)

Slick Rock Mill Site - CO 08 Slick Rock Mill Site - CO 08 FUSRAP Considered Sites Site: Slick Rock Mill Site (CO.08) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: Also see Slick Rock, Colorado, Processing Site Documents Related to Slick Rock Mill Site 2012 Annual Site Inspection and Monitoring Report for Uranium Mill Tailings Radiation Control Act Title I Disposal Sites-Slick Rock, Colorado, Disposal Site. LMS/S09461. February 2013 Verification Monitoring Report for the Slick Rock, Colorado, Processing Sites, 2007 Update June 2008 Office of Legacy Management DOE M/1577 2008 - -L Work Performed Under DOE Contract No. for the U.S.

311

DOE - Office of Legacy Management -- Green River Mill Site - UT 0-01  

Office of Legacy Management (LM)

Green River Mill Site - UT 0-01 Green River Mill Site - UT 0-01 FUSRAP Considered Sites Site: Green River Mill Site (UT.0-01 ) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: Also see Green River, Utah, Disposal Site Documents Related to Green River Mill Site Data Validation Package for the June 2009 Groundwater and Surface Water Sampling at the Green River, Utah, Disposal Site; LMS/GRN/S0609; October 2009 2012 Annual Site Inspection and Monitoring Report for Uranium Mill Tailings Radiation Control Act Title I Disposal Sites-Green River, Utah, Disposal Site. LMS/S09461. February 2013 Historic Fact Sheet: Green River Disposal Site Uranium ore was

312

DOE to Transport Moab Mill Tailings by Rail | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

to Transport Moab Mill Tailings by Rail to Transport Moab Mill Tailings by Rail DOE to Transport Moab Mill Tailings by Rail August 5, 2008 - 2:40pm Addthis Department Approves Project Baseline and Obtains Nuclear Regulatory Commission Nod WASHINGTON, DC - The U.S. Department of Energy (DOE) today reaffirmed its prior decision to relocate mill tailings predominantly by rail from the former uranium-ore processing site near Moab, Utah, 30 miles north to Crescent Junction, Utah. As determined previously, oversized material that is not practical to be sized to fit into the containers will be transported by truck. "After evaluating the alternatives for safely transporting the mill tailings from Moab and considering input received from citizens in the Moab community and surrounding areas, DOE has decided to ship the tailings using

313

EIS-0355: Remediation of the Moab Uranium Mill Tailings, Grand and San Juan  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

355: Remediation of the Moab Uranium Mill Tailings, Grand and 355: Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, Utah EIS-0355: Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, Utah Summary The Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, Utah, Environmental Impact Statement and associated supplements and amendments provides information on the environmental impacts of the U.S. Department of Energy's (DOE's) proposal to (1) remediate approximately 11.9 million tons of contaminated materials located on the Moab site and approximately 39,700 tons located on nearby vicinity properties and (2) develop and implement a ground water compliance strategy for the Moab site using the framework of the Programmatic Environmental Impact Statement for the Uranium Mill Tailings Remedial Action Ground Water

314

DOE - Office of Legacy Management -- Riverton Mill Site - WY 0-04  

Office of Legacy Management (LM)

Mill Site - WY 0-04 Mill Site - WY 0-04 FUSRAP Considered Sites Site: Riverton Mill Site (WY.0-04 ) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: Also see Riverton, Wyoming, Processing Site Documents Related to Riverton Mill Site Data Validation Package for the November 2008 Groundwater and Surface Water Sampling at the Riverton, Wyoming, Processing Site. February 2009 U. S. Department of Energy (DOE) Status and Planned Actions at the Riverton, Wyoming, Uranium Mill Tailing Radiation Control Act (UMTRCA) Title I Site April Gil, PhD Environment Team Lead Office of Legacy Management (LM) May 2, 20122 Status and Action Summary 􀂄 Surface

315

DOE - Office of Legacy Management -- Gunnison Mill Site - CO 0-06  

Office of Legacy Management (LM)

Gunnison Mill Site - CO 0-06 Gunnison Mill Site - CO 0-06 FUSRAP Considered Sites Site: Gunnison Mill Site (CO.0-06 ) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: Also see Gunnison, Colorado, Processing Site Documents Related to Gunnison Mill Site Verification Montioring Report for the Gunnison, Colorado, Processing Site, September 2007. 2011 Annual Site Inspection and Monitoring Report for Uranium Mill Tailings Radiation Control Act Title I Disposal Sites-Gunnison, Colorado, Disposal Site. LMS/S08056. January 2012 U.S. Department of Energy 2009 UMTRCA Title I Annual Report January 2010 Gunnison, Colorado Page 8-1 8.0 Gunnison, Colorado, Disposal Site

316

DOE - Office of Legacy Management -- Rifle Mill Site - CO 0-11  

Office of Legacy Management (LM)

Rifle Mill Site - CO 0-11 Rifle Mill Site - CO 0-11 FUSRAP Considered Sites Site: Rifle Mill Site (CO.0-11 ) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: Also see Rifle, Colorado, New Processing Site Rifle, Colorado, Old Processing Site Documents Related to Rifle Mill Site 2009 Verification Monitoring Report for the Old and New Rifle, Colorado, Processing Sites; LMS/RFO/RFN/S05775; September 2009. This report evaluates and interprets groundwater monitoring data collected at the Old and New Rifle Sites and assesses the progress of meeting the compliance strategy for groundwater cleanup. 2012 Annual Site Inspection and Monitoring Report for Uranium Mill

317

DOE - Office of Legacy Management -- Naturita Mill Site - CO 0-08  

Office of Legacy Management (LM)

Naturita Mill Site - CO 0-08 Naturita Mill Site - CO 0-08 FUSRAP Considered Sites Site: Naturita Mill Site (CO.0-08) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: Also see Naturita, Colorado, Processing Site Documents Related to Naturita Mill Site Data Validation Package for the July and October 2008 Water Sampling at the Naturita Processing and Disposal Sites Data Validation Report for the July 2009 Groundwater and Surface Water Sampling at the Naturita, Colorado, Processing Site; LMS/NAP/S00709; October 2009 2012 Annual Site Inspection and Monitoring Report for Uranium Mill Tailings Radiation Control Act Title I Disposal Sites-Naturita, Colorado,

318

Effect of Milling Parameters on the Dehydrogenation Properties of the Mg-Ti-H system  

DOE Green Energy (OSTI)

Magnesium-based alloys are promising candidates as potential hydrogen storage materials due to their inherent high hydrogen contents. Small particle size which can be achieved by milling, and small amounts of transition-metal compounds as catalysts result in increased hydrogen release/uptake kinetics. In this work, we examined the effects of various milling parameters and TiH2 content on the dehydrogenation properties of the Mg-Ti-H system. The samples were prepared with different amounts of TiH2 using various milling methods and conditions. The activation energy and the enthalpy change of dehydrogenation of the milled samples were determined by Thermogravimetric Analysis (TGA) and Differential Thermal Analyzer (DTA). The results indicated that the activation energy and enthalpy change of MgH2 dehydrogenation were significantly reduced when 9.1 mol % of TiH2 was added to it and the mixture was milled in a dual planet

Choi, Young Joon; Lu, Jun; Sohn, Hong Yong; Fang, Zhigang Zak; Ronnebro, Ewa

2009-11-05T23:59:59.000Z

319

Classical properties of the non-abelian Yang-Mills theories  

E-Print Network (OSTI)

We present some classical properties of the non-abelian Yang-Mills theories that we obtain directly from the Maxwells equations of the SU(3) Yang-Mills theory. To do it we first examine under which conditions the equations of motion for the SU(3) Yang-Mills theory have the same form as those of the classical electrodynamics. Next we write the equations of motion for the SU(3) Yang-Mills theory using the language of the Maxwells equations. We show that electric and magnetic non-abelian fields, whose origin is not fermionic, are present in the non-abelian Yang-Mills theories. The non-abelian gauge fields can be assumed as the sources of these electric and magnetic fields. Finally we show how the non-abelian gauge fields are also the responsible for the existence of magnetic monopoles in this kind of theories.

J. A. Snchez-monroy; C. Quimbay

2007-01-01T23:59:59.000Z

320

DOE to Transport Moab Mill Tailings by Rail | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Transport Moab Mill Tailings by Rail Transport Moab Mill Tailings by Rail DOE to Transport Moab Mill Tailings by Rail August 5, 2008 - 2:40pm Addthis Department Approves Project Baseline and Obtains Nuclear Regulatory Commission Nod WASHINGTON, DC - The U.S. Department of Energy (DOE) today reaffirmed its prior decision to relocate mill tailings predominantly by rail from the former uranium-ore processing site near Moab, Utah, 30 miles north to Crescent Junction, Utah. As determined previously, oversized material that is not practical to be sized to fit into the containers will be transported by truck. "After evaluating the alternatives for safely transporting the mill tailings from Moab and considering input received from citizens in the Moab community and surrounding areas, DOE has decided to ship the tailings using

Note: This page contains sample records for the topic "jack wise mills" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Editors: Jack Peters Academic Administration  

E-Print Network (OSTI)

IO N OF T HIS PAG E (When Dale E nle,ed) #12;PREFACE This report presents results of a biological Measures 14 Foreign Searches for Possible Biological Control Agents 15 Domestic Insects . . . . . . 17 PART;LIST OF TABLES No. 1 Chronology of Search for Insect Enemies of Eurasian Watermilfoil 2 Locations

O'Laughlin, Jay

322

Chih-Ming (Jack) Wang  

Science Conference Proceedings (OSTI)

... of polarization dependent loss of fiber ... nm for combined photodiode/rf power sensor transfer ... Statistical analysis of network analyzer measurements ...

2010-10-04T23:59:59.000Z

323

SSA Young Jack Pine Site  

NLE Websites -- All DOE Office Websites (Extended Search)

View an aerial photo-map of the SSA-YJP site. Beginning of the "flagged path" to the tower, from the road The "new trail" to the YJP site, looking towards the site The hut and...

324

Excerpt from Jack London, Photographer  

E-Print Network (OSTI)

about the cruise for Cosmopolitan and the Womans HomeMillard, the editor of Cosmopolitan, London g offers themagazines, including Cosmopolitan, McClures, and Outing,

Reesman, Jeanne Campbell

2011-01-01T23:59:59.000Z

325

Jack Dongarra University of Tennessee  

E-Print Network (OSTI)

Tusbame 2.0 HP ProLiant SL390s G7 Xeon 6C X5670, Nvidia GPU Japan 73,278 1.19 52 1.40 850 5 DOE/SC/LBNL/NERSC of Technology Tusbame 2.0 HP ProLiant SL390s G7 Xeon 6C X5670, Nvidia GPU Japan 73,278 1.19 52 1.40 850 5 DOE/SC/LBNL/NERSC

326

Monitoring the Performance of an Alternative Landfill Cover at the Monticello, Utah, Uranium Mill Tailings Disposal Site  

Energy.gov (U.S. Department of Energy (DOE))

Monitoring the Performance of an Alternative Landfill Cover at the Monticello, Utah, Uranium Mill Tailings Disposal Site

327

Thermal Green's functions of the energy-momentum tensor and transport coefficients of the SU(3) Yang-Mills gas  

E-Print Network (OSTI)

Thermal Green's functions of the energy-momentum tensor and transport coefficients of the SU(3) Yang-Mills gas

Karsch, Frithjof

1987-01-01T23:59:59.000Z

328

Final environmental statement related to the United Nuclear Corporation, Morton Ranch, Wyoming Uranium Mill (Converse County, Wyoming)  

SciTech Connect

Impacts from Morton Ranch Uranium Mill will result in: alterations of up to 270 acres occupied by the mill facilities; increase in the existing background radiation levels; socioeconomic effects on Glenrock and Douglas, Wyoming. Solid waste material (tailings solids) from the mill will be deposited onsite in exhausted surface mine pits. Any license issued for the Morton Ranch mill will be subject to conditions for the protection of the environment.

1979-02-01T23:59:59.000Z

329

Systematic evaluation of satellite remote sensing for identifying uranium mines and mills.  

SciTech Connect

In this report, we systematically evaluate the ability of current-generation, satellite-based spectroscopic sensors to distinguish uranium mines and mills from other mineral mining and milling operations. We perform this systematic evaluation by (1) outlining the remote, spectroscopic signal generation process, (2) documenting the capabilities of current commercial satellite systems, (3) systematically comparing the uranium mining and milling process to other mineral mining and milling operations, and (4) identifying the most promising observables associated with uranium mining and milling that can be identified using satellite remote sensing. The Ranger uranium mine and mill in Australia serves as a case study where we apply and test the techniques developed in this systematic analysis. Based on literature research of mineral mining and milling practices, we develop a decision tree which utilizes the information contained in one or more observables to determine whether uranium is possibly being mined and/or milled at a given site. Promising observables associated with uranium mining and milling at the Ranger site included in the decision tree are uranium ore, sulfur, the uranium pregnant leach liquor, ammonia, and uranyl compounds and sulfate ion disposed of in the tailings pond. Based on the size, concentration, and spectral characteristics of these promising observables, we then determine whether these observables can be identified using current commercial satellite systems, namely Hyperion, ASTER, and Quickbird. We conclude that the only promising observables at Ranger that can be uniquely identified using a current commercial satellite system (notably Hyperion) are magnesium chlorite in the open pit mine and the sulfur stockpile. Based on the identified magnesium chlorite and sulfur observables, the decision tree narrows the possible mineral candidates at Ranger to uranium, copper, zinc, manganese, vanadium, the rare earths, and phosphorus, all of which are milled using sulfuric acid leaching.

Blair, Dianna Sue; Stork, Christopher Lyle; Smartt, Heidi Anne; Smith, Jody Lynn

2006-01-01T23:59:59.000Z

330

SYNTHESIS OF METAL HYDRIDES BY MECHANICAL ALLOYING IN AN ATTRITOR MILL: FY07 STATUS REPORT  

DOE Green Energy (OSTI)

The objective of this task was to demonstrate that metal hydrides could be produced by mechanical alloying in the quantities needed to support the tritium production facilities at the Savannah River Site. The objective for the FY07 portion of this task was to demonstrate the production of Zr-Fe getter materials by mechanical alloying and begin to optimize the milling parameters. Three starting compositions (ratios of elemental Zr and Fe powders) were selected and attritor milled under argon for times of 8 to 60 hours. Hexane and liquid nitrogen were used as process control agents. In general, milling times of at least 24 hours were required to form the desired Zr{sub 2}Fe and Zr{sub 3}Fe phases, although a considerable amount of unalloyed Zr and Fe remained. Milling in liquid nitrogen does not appear to provide any advantages over milling in hexane, particularly due to the formation of ZrN after longer milling times. Carbides of Zr formed during some of the milling experiments in hexane. Formation of carbides during milling appears to be much less of an issue than formation of nitrides, although some of the phases that were not able to be identified in the XRD results may also be carbides. Additional XRD experiments should be designed to improve signal to noise ratio (i.e., longer count times) and use a wider scan range to better identify phases that were not clear in the original data. Elemental Zr was present in the as-milled material but not detected after annealing for milling times of 48 and 60 hours. It may be that after intimate mixing of the powders in the attritor mill the annealing temperature was sufficient to allow for the formation of a Zr-Fe alloy. The phase diagram for the binary Zr-Fe system agrees with this proposition. If this is the case, then the annealing conditions should also be investigated and optimized to form as much of the Zr-Fe alloy as possible in the milled powder. Also, this finding would mean that milling times of more than 48 hours are not necessary. Further investigation of this conversion is necessary, and could provide an opportunity for reducing the amount of unreacted metal powder after milling. Elemental Fe remained in all of the powders after annealing for all of the milling times tested. This may indicate that the ratio of Zr to Fe needs to be increased in order to improve the yield of the desired Zr-Fe alloys. Particle size analysis data are presented to aid in the selection of filters for future hydrogen sorption testing. Based on the XRD results, four samples were suggested for further XRD analysis and hydrogen sorption testing: (1) Zr{sub 2}Fe, 24 hr milling, annealed; (2) Zr{sub 2}Fe, 24 hr milling in LN{sub 2}, annealed; (3) Zr{sub 3}Fe, 24 hr milling, annealed; and (4) Zr{sub 3}Fe, 48 hr milling, annealed. These four samples showed the largest volume (based on relative peak intensities) of the desired Zr{sub 2}Fe and Zr{sub 3}Fe alloys.

Fox, K

2007-11-08T23:59:59.000Z

331

Lake Mills Light & Water | Open Energy Information  

Open Energy Info (EERE)

Water Water Jump to: navigation, search Name Lake Mills Light & Water Place Wisconsin Utility Id 10605 Utility Location Yes Ownership M NERC Location MRO NERC MRO Yes ISO MISO Yes Activity Distribution Yes Alt Fuel Vehicle Yes Alt Fuel Vehicle2 Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Cp-1 Small Power Service between 50kW and 200kW Demand Primary Metering and Transformer Ownership Discount with Parallel Generation(20kW or less) Industrial Cp-1 Small Power Service between 50kW and 200kW Demand Primary Metering and Transformer Ownership Discount Industrial

332

Monticello Mill Tailings Site Operable Unit Ill Interim Remedial Action  

Office of Legacy Management (LM)

Site Site Operable Unit Ill Interim Remedial Action Mark Perfxmed Under DOE Contrici No. DE-AC13-96CJ873.35 for th3 U.S. De[:ar!menf of Energy app~oveJioi'ptiL#ic re1ease;dCinWlionis Unlimilra' This page intentionally left blank Monticello Mill Tailings Site Operable Unit I11 Interim Remedial Action Annual Status Report August 1999 Prepared for U.S. Department of Energy Albuquerque Operations Office Grand Junction Office Project Number MSG-035-0011-00-000 Document Number Q0017700 Work Performed Under DOE Contract Number DE-AC13-96GJ87335 Task Order Number MAC99-03 This page intentionally blank Document Number Q0017700 Acronyms Contents Page ACRONYMS .............................................................................................................................. V

333

Monticello Mill Tailings Site Operable Unit III Ecological Risk  

Office of Legacy Management (LM)

Monticello Monticello Mill Tailings Site Operable Unit III Ecological Risk Assessment September 1998 Prepared by U.S. Department of Energy Grand JunctionOffice Grand Junction, Colorado Project Number MSG-035-0004-00-000 Document Number Q0002l 00 Work Performed Under DOE Contract Number DE-AC13-96GJ87335 Task Order Number MAC98-03 This page intentionally blank , ** 1 ( ( Document Number Q00021 00 Contents Contents Page Acronyms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. ix Executive Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. xi 1.0 Introduction I-I 2.0 Problem Formulation : 2-1 2.1 Site Description 2-1 2.1.1 Physical Setting 2-1 2.1.2 Ecological Setting '.' 2-5 2.2 Ecological Contaminants of Concern 2-9 2.3 Contaminant Fate and Transport, Ecosystems Potentially at Risk, and Complete Exposure Pathways 2-11 i3.1

334

Mine-to-Mill Optimization of Aggregate Production  

Science Conference Proceedings (OSTI)

Mine-to-Mill optimization is a total systems approach to the reduction of energy and cost in mining and processing. Developed at the Julius Krutschnitt Mineral Research Center in Queensland, Australia, the Mine-to-Mill approach attempts to minimize energy consumption through optimization of all steps in the size reduction process. The approach involves sampling and modeling of blasting and processing, followed by computer simulation to optimize the operation and develop alternatives. The most promising alternatives are implemented, and sampling is conducted to quantify benefits. In the current project, the primary objective was to adapt Mine-to-Mill technology to the aggregates industry. The first phase of this work was carried out at the Bealeton Quarry near Fredericksburg, Virginia. The second phase was carried out at the Pittsboro Quarry south of Chapel Hill, North Carolina. Both quarries are operated by Luck Stone Corporation of Richmond, Virginia. As a result of the work, several conclusions can be drawn from the project which should assist DOE in assessing the applicability of the Mine-to-Mill approach to the aggregates industry. 1. Implementation of MTM guidelines at Pittsboro has resulted in tangible improvements in productivity. It is clear that MTM guidelines represent an energy savings of around 5% (primary and secondary) and an overall energy savings of 1%. This 1-5% energy savings is also consistent with simulated results for Bealeton had side-by-side shots used to evaluate the technology been carried out in the same rockmass. 2. Luck Stone clearly runs their operations at a high standard. Hence the percentage improvement realized in this project may represent the lower end of what might be expected overall in the aggregates industry. 3. Variability in ore types across both Bealeton and Pittsboro suggests a 2:1 difference in hardness which contradicts the misconception that quarry rock is homogenous. Therefore, the idea of comparing side-by-side blasts is not viable and long term comparisons stand the best chance of confirming the benefits of optimized blasting. 4. There are clear limitations on how much improvement can be made in the aggregate industry due to the fixed feed size that reports to the tertiary section of a typical aggregate plant. These limitations restrict the MTM approach from exercising significant increases in blasting which would only serve to increase fines and reduce product yield. 5. The key to success at Pittsboro was the development of MTM guidelines for the modified blasting practice in consultation with the drill & blast crew. Their full buy-in was necessary to implement optimized blasting in a sustained manner. 6. The JKSimBlast and JKSimMet models have proven to be effective tools for examining blasting and processing at Bealeton and Pittsboro. These models should enable Luck Stone to transfer the MTM approach to other sites.

Greg Adel; Toni Kojovic; Darren Thornton

2006-09-30T23:59:59.000Z

335

Chiral symmetry and the Yang--Mills gradient flow  

E-Print Network (OSTI)

In the last few years, the Yang--Mills gradient flow was shown to be an attractive tool for non-perturbative studies of non-Abelian gauge theories. Here a simple extension of the flow to the quark fields in QCD is considered. As in the case of the pure-gauge gradient flow, the renormalizability of correlation functions involving local fields at positive flow times can be established using a representation through a local field theory in 4+1 dimensions. Applications of the extended flow in lattice QCD include non-perturbative renormalization and O(a) improvement as well as accurate calculations of the chiral condensate and of the pseudo-scalar decay constant in the chiral limit.

Martin Lscher

2013-02-21T23:59:59.000Z

336

Guidelines for cleanup of uranium tailings from inactive mills  

SciTech Connect

Recent experiences in Grand Junction, Colorado, have indicated the significance of uranium tailings as sources of nonoccupational exposure and suggest that current methods for perpetual care and isolation of the large areas covered by tailings piles at inactive mill locations may be inadequate for minimizing human exposure. This paper presents the rationale and the procedures used in reviewing the adequacy of proposed criteria for remedial action at these sites. Exposures due to aquatic, terrestrial, airborne, and direct contamination pathways were compared to determine the most important radionuclides in the pile and their pathways to man. It is shown that the most hazardous components of the tailings are $sup 226$Ra and $sup 230$Th. The long half-lives of these radionuclides require the consideration of continuous occupancy of the vacated site at some future time, even if the immediately projected land use does not anticipate maximum exposure. (auth)

Goldsmith, W.A.; Haywood, F.F.; Jacobs, D.G.

1975-01-01T23:59:59.000Z

337

Uranium Mill Tailings Remedial Action Project 1993 Environmental Report  

SciTech Connect

This annual report documents the Uranium Mill Tailing Remedial Action (UMTRA) Project environmental monitoring and protection program. The UMTRA Project routinely monitors radiation, radioactive residual materials, and hazardous constituents at associated former uranium tailings processing sites and disposal sites. At the end of 1993, surface remedial action was complete at 10 of the 24 designated UMTRA Project processing sites. In 1993 the UMTRA Project office revised the UMTRA Project Environmental Protection Implementation Plan, as required by the US DOE. Because the UMTRA Project sites are in different stages of remedial action, the breadth of the UMTRA environmental protection program differs from site to site. In general, sites actively undergoing surface remedial action have the most comprehensive environmental programs for sampling media. At sites where surface remedial action is complete and at sites where remedial action has not yet begun, the environmental program consists primarily of surface water and ground water monitoring to support site characterization, baseline risk assessments, or disposal site performance assessments.

Not Available

1994-10-01T23:59:59.000Z

338

Dual superconductivity and vacuum properties in Yang--Mills theories  

E-Print Network (OSTI)

We address, within the dual superconductivity model for color confinement, the question whether the Yang-Mills vacuum behaves as a superconductor of type I or type II. In order to do that we compare, for the theory with gauge group SU(2), the determination of the field penetration depth $\\lambda$ with that of the superconductor correlation length $\\xi$. The latter is obtained by measuring the temporal correlator of a disorder parameter developed by the Pisa group to detect dual superconductivity. The comparison places the vacuum close to the border between type I and type II and marginally on the type II side. We also check our results against the study of directly measurable effects such as the interaction between two parallel flux tubes, obtaining consistent indications for a weak repulsive behaviour. Future strategies to improve our investigation are discussed.

A. D'Alessandro; M. D'Elia; L. Tagliacozzo

2006-07-12T23:59:59.000Z

339

Dual Superconductivity from Yang-Mills Theory via Connection Decomposition  

E-Print Network (OSTI)

We derive an Abelian-Higgs-like action from SU(2) Yang-Mills theory via monopole-condensation assumption. Abelian projection as well as chromo-'electric-magnetic' duality are naturally realized by separating the small off-diagonal gluon part from diagonal gluon field according to the order of inverse coupling constant($1/g$). It is shown that Abelian dominance can follow from infrared behavior of ranning coupling constant and the mass generation of chromo-electric field as well as off-diagonal gluon is due to the quantum fluctuation of orientation of Abelian direction. Dual superconductivity of theory vacuum is confirmed by deriving dual London equation for chromo-electronic field.

Duoje Jia

2005-09-03T23:59:59.000Z

340

Uranium Mill Tailings Remedial Action Project Environmental Protection Implementation Plan  

Science Conference Proceedings (OSTI)

The Uranium Mill Tailings Remedial Action (UMTRA) Project Environmental Protection Implementation Plan (EPIP) has been prepared in accordance with the requirements of the US Department of Energy (DOE) Order 5400.1. The UMTRA EPIP covers the time period of November 9, 1993, through November 8, 1994. It will be updated annually. Its purpose is to provide management direction to ensure that the UMTRA Project is operated and managed in a manner that will protect, maintain, and where necessary, restore environmental quality, minimize potential threats to public health and the environment, and comply with environmental regulations and DOE policies. Contents of this report are: (1) general description of the UMTRA project environmental protection program; (2) notifications; (3) planning and reporting; (4) special programs; (5) environmental monitoring programs; (6) quality assurance and data verification; and (7) references.

Vollmer, A.T.

1993-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "jack wise mills" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Ion-plasma gun for ion-milling machine  

DOE Patents (OSTI)

An ion gun includes an elongated electrode with a hollow end portion closed by a perforated end plate. The end plate is positioned parallel to a perforated flat electrode of opposite electrical polarity. An insulated sleeve encompasses the elongated electrode and extends outwardly from the perforated end towards the flat electrode. The sleeve length is separated into two portions of different materials. The first is formed of a high-temperature material that extends over the hollow portion of the elongated electrode where the arc is initiated by a point source electrode. The second sleeve portion extending over the remainder of the elongated electrode is of a resilient material for enhanced seal-forming ability and retention of plasma gas. Perforations are arranged in the flat electrode in a mutually opposing triangular pattern to project a plasma beam having a generally flat current profile towards a target requiring precision milling.

Kaminsky, Manfred S. (Hinsdale, IL); Campana, Jr., Thomas J. (Hinsdale, IL)

1976-01-01T23:59:59.000Z

342

Protect and Restore Mill Creek Watershed : Annual Report CY 2005.  

DOE Green Energy (OSTI)

The Nez Perce Tribe Department of Fisheries Resource Management, Watershed Division approaches watershed restoration with a ridge-top to ridge-top approach. The Nez Perce Tribe and the Nez Perce National Forest (NPNF) have formed a partnership in completing watershed restoration activities, and through this partnership, more work is accomplished by sharing funding and resources in our effort. The Nez Perce Tribe began watershed restoration projects within the Mill Creek watershed of the South Fork Clearwater River in 2000. Progress has been made in restoring the watershed through excluding cattle from critical riparian areas through fencing. Starting in FY 2002, continuing into 2004, trees were planted in riparian areas in the meadow of the upper watershed. In addition, a complete inventory of culverts at road-stream crossings was completed. Culverts have been prioritized for replacement to accommodate fish passage throughout the watershed, and one high priority culvert was replaced in 2004. Maintenance to the previously built fence was also completed.

McRoberts, Heidi

2006-03-01T23:59:59.000Z

343

Mill Seat Landfill Bioreactor Renewable Green Power (NY)  

Science Conference Proceedings (OSTI)

The project was implemented at the Mill Seat landfill located in the Town of Bergen, Monroe County, New York. The landfill was previously equipped with a landfill gas collection system to collect methane gas produced by the bioreactor landfill and transport it to a central location for end use. A landfill gas to energy facility was also previously constructed at the site, which utilized generator engines, designed to be powered with landfill methane gas, to produce electricity, to be utilized on site and to be sold to the utility grid. The landfill gas generation rate at the site had exceeded the capacity of the existing generators, and the excess landfill gas was therefore being burned at a candlestick flare for destruction. The funded project consisted of the procurement and installation of two (2) additional 800 KW Caterpillar 3516 generator engines, generator sets, switchgear and ancillary equipment.

Barton & Loguidice, P.C.

2010-01-07T23:59:59.000Z

344

Sociologically imagined: the decentering of C. Wright Mills, the postmodern cowboy  

E-Print Network (OSTI)

Examining early biographical events in C. Wright Mills life, along with his relationships to his family, some of whom he denied as even being family later in his life, the following study demonstrates a link between the early psychological traumas of a young Mills and the strong impact these had on his later intellectual thought. Such an approach looms as potentially important and beneficial in gaining insight into Mills theoretical positions when we turn to academics such as Alice Miller, Sigmund Freud and C.G. Jung who demonstrate the lasting and shaping impact that early psychological development has on the thoughts, ideas and expressions of older adults. Even for empirical-based sociologists who may be hesitant to accept psychoanalytic explanations, it is difficult to reject this position outright. Even within sociologys own house, Max Weber, Talcott Parsons, David Riesman and C. Wright Mills also utilize basic psychoanalytic insights in their sociological writings. Using Mills psychological development as an entry point, this work demonstrates the similarities between Mills early biographical trajectory and its psychological impact on his later life as compared to very similar developments in the lives of Friedrich Nietzsche, Thorstein Veblen and Weber. Ultimately, we come to see that not only is Mills early psychological development similar to these earlier thinkers, but his intellectual thought later in his life is similar as well.

Kerr, Keith Thomas

2007-05-01T23:59:59.000Z

345

Uranium Mill Tailings Remedial Action Project, Surface Project Management Plan. Revision 1  

SciTech Connect

Title I of the Uranium Mill Tailings Radiation Control Act (UMTRCA) authorizes the US Department of Energy (DOE) to undertake remedial action at 24 designated inactive uranium processing sites and associated vicinity properties (VP) containing uranium mill tailings and related residual radioactive materials. The purpose of the Uranium Mill Tailings Remedial Action (UMTRA) Surface Project is to minimize or eliminate radiation health hazards to the public and the environment at the 24 sites and related VPs. This document describes the management organization, system, and methods used to manage the design, construction, and other activities required to clean up the designated sites and associated VPs, in accordance with the UMTRCA.

Not Available

1994-12-01T23:59:59.000Z

346

Titania Prepared by Ball Milling: Its Characterization and Application as Liquefied Petroleum Gas Sensor  

E-Print Network (OSTI)

Present paper reports the LPG sensing of TiO2 obtained through ball milling. The milled powder was characterized by XRD, TEM and UV-visible spectroscopy. Further the ball milled powder was compressed in to pellet using hydraulic press. This pellet was investigated with the exposure of LPG. Variations in resistance with exposure of LPG to the sensing pellet were recorded. The sensitivity of the sensor was ~ 11 for 5 vol.% of LPG. Response and recovery times of the sensor were ~ 100 and 250 sec. The sensor was quite sensitive to LPG and results were found reproducible within 91%.

Yadav, B C; Singh, Satyendra; Yadav, T P

2012-01-01T23:59:59.000Z

347

Energy and protein production from pulp mill wastes. Quarterly report, December 15, 1978-March 15, 1979  

SciTech Connect

The objective for the past quarter included reversing the decline in productivity from the methane fermenters, confirming methane and yeast production from acetate, and making trial runs on kraft mill and semichemical mill effluents. Although methane production remained low (20 cc/hr) addition of 2% methanol doubled production. Progress has been made on identifying possible viruses that might be preventing higher methane production. Confirmation that acetate can be used as a substrate for methane production has been obtained. An initial test on the Decker filtrate from a kraft mill gave 20 cc/hr methane production.

Jurgensen, M.F.; Patton, J.T.

1979-03-15T23:59:59.000Z

348

Detection of Tool Flute Breakage in End Milling Using Feed-Motor Current Signatures  

E-Print Network (OSTI)

In this paper, an effective algorithm based on improved time-domain averaging is proposed to detect tool flute breakage during end milling using feed-motor current signatures. The algorithm proposed is demonstrated to be effective in detecting tool flute breakage in real time through a series of milling experiments, and is also demonstrated to be insensitive to the effects for transients, such as cutter runout, entry/exit cuts, and noise in the feed-motor current signals. Results indicated that the approach showed excellent potential for practical, on-line application for tool flute breakage detection during end milling.

Xiao Li

2001-01-01T23:59:59.000Z

349

Enhanced Oxidative Reactivity for Anthracite Coal via a Reactive Ball Milling Pretreatment Step  

Science Conference Proceedings (OSTI)

Reactive ball milling in a cyclohexene solvent significantly increases the oxidative reactivity of an anthracite coal, due to the combined effects of particle size reduction, metal introduction, introduction of volatile matter, and changes in carbon structure. Metals introduced during milling can be easily removed via a subsequent demineralization process, and the increased reactivity is retained. Solvent addition alters the morphological changes that occur during pyrolysis and leads to a char with significantly increased reactivity. When the solvent is omitted, similar effects are seen for the milled product, but a significant fraction of the char is resistant to oxidation. 33 refs., 3 figs., 1 tab.

Angela D. Lueking; Apurba Sakti; Dania Alvarez-Fonseca; Nichole Wonderling [Pennsylvania State University, PA (United States). Department of Energy and Mineral Engineering

2009-09-15T23:59:59.000Z

350

Moab Mill Tailings Removal Project Reaches 5 Million Tons Disposed: Project  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Moab Mill Tailings Removal Project Reaches 5 Million Tons Disposed: Moab Mill Tailings Removal Project Reaches 5 Million Tons Disposed: Project Accomplishes Milestone While Doing it Safely Moab Mill Tailings Removal Project Reaches 5 Million Tons Disposed: Project Accomplishes Milestone While Doing it Safely February 27, 2012 - 12:00pm Addthis Media Contacts Donald Metzler, Moab Federal Project Director, (970) 257-2115 Wendee Ryan, S&K Aerospace Public Affairs Manager, (970) 257-2145 Grand Junction, CO- The U.S. Department of Energy (DOE) reached another milestone today for the Uranium Mill Tailings Remedial Action Project, having shipped 5 million tons of tailings from the massive pile located in Moab, Utah, to the engineered disposal cell near Crescent Junction, Utah. The pile comprised an estimated 16 million tons total when DOE's Remedial

351

DOE Amends Decision for the Remediation of the Moab Uranium Mill Tailings  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Amends Decision for the Remediation of the Moab Uranium Mill Amends Decision for the Remediation of the Moab Uranium Mill Tailings in Moab, Utah DOE Amends Decision for the Remediation of the Moab Uranium Mill Tailings in Moab, Utah February 29, 2008 - 11:43am Addthis WASHINGTON, DC - The U.S. Department of Energy (DOE) today announced an amendment to its 2005 Record of Decision (ROD) for the Moab Uranium Mill Tailings Remedial Action (UMTRA) Project to allow for the use of truck or rail in transporting residual radioactive materials from the Moab site in Utah. These materials will be relocated to a new disposal site 30 miles north at Crescent Junction, Utah. "The Department is committed to ensuring the protection of human health and the environment in the Moab area and in the communities served by the Colorado River," Assistant Secretary for Environmental Management Jim

352

DOE - Office of Legacy Management -- Monument Valley Mill Site - AZ 0-01  

Office of Legacy Management (LM)

Monument Valley Mill Site - AZ 0-01 Monument Valley Mill Site - AZ 0-01 FUSRAP Considered Sites Site: Monument Valley Mill Site (AZ.0-01) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: Also see Monument Valley, Arizona, Processing Site Documents Related to Monument Valley Mill Site Data Validation Package for the June 2009 Water Sampling at the Monument Valley, Arizona, Processing Site; LMS/MON/S0609; October 2009 Natural and Enhanced Attenuation of Soil and Ground Water at Monument Valley, Arizona, and Shiprock, New Mexico 2006 Status Report June 2008 Data Validation Package for 2007 Groundwater Sampling at the Monument Valley, AZ Processing Site

353

SURVEY OF ROLLING MILL USED BY BETHLEHEM STEEL CORPORATION LACKAWANNA, NEW YORK  

Office of Legacy Management (LM)

SURVEY OF ROLLING MILL USED BY SURVEY OF ROLLING MILL USED BY BETHLEHEM STEEL CORPORATION LACKAWANNA, NEW YORK Work performed by the Health and Safety Research Division Gak Ridge fiational Laboratory Oak Ridge, Tennessee 37830 September 1980 OAK RIDGE NATIONAL LABORATORY operated by UNION CARBIDE CORPORATION for the DEPARTMENT OF ENERGY as part of the Formerly Utilized Sites!- Remedial Action Program SURVEY OF ROLLING MILL USED BY BETHLEHEM STEEL CORPORATION LACKAWANNA, NEW YORK A radiological survey was conducted at the Bethelem Steel Corporation Plant in Lackawanna, New York, on September 23, 1980, by representatives of Oak Ridge National Laboratory (ORNL). The subject of the radiological survey was a portion of the original 25.4-cm (lo-inch) bar mill used in converting uranium billets into 3.8-cm rods. All radiation survey

354

Converting mill buildings into housing : ways of working with brick walls  

E-Print Network (OSTI)

The mill buildings of New England add a unique dimension to the heritage and identity of the region. Today some of these buildings continue to function as the site of industry, others have been converted to commercial or ...

Pressman, Paul

1981-01-01T23:59:59.000Z

355

Retrieving Storm Electric Fields from Aircraft Field Mill Data. Part I: Theory  

Science Conference Proceedings (OSTI)

It is shown that the problem of retrieving storm electric fields from an aircraft instrumented with several electric field mill sensors can be expressed in terms of a standard Lagrange multiplier optimization problem. The method naturally removes ...

W. J. Koshak

2006-10-01T23:59:59.000Z

356

Retrieving Storm Electric Fields from Aircraft Field Mill Data. Part II: Applications  

Science Conference Proceedings (OSTI)

The Lagrange multiplier theory developed in Part I of this study is applied to complete a relative calibration of a Citation aircraft that is instrumented with six field mill sensors. When side constraints related to average fields are used, the ...

W. J. Koshak; D. M. Mach; H. J. Christian; M. F. Stewart; M. G. Bateman

2006-10-01T23:59:59.000Z

357

Analytic calculation of Witten index in D= 2 supersymmetric Yang-Mills quantum mechanics  

Science Conference Proceedings (OSTI)

We evaluate analytically the Witten index of D= 2 supersymmetric Yang-Mills quantum mechanics. We rederive a known result for the SU(2) gauge group and generalize it to any SU(N) gauge group.

Korcyl, Piotr [M. Smoluchowski Institute of Physics, Jagiellonian University, Reymonta 4, 30-059 Krakow (Poland)

2012-10-15T23:59:59.000Z

358

Case Study of Optimal Byproduct Gas Distribution in Integrated Steel Mill Using Multi-Period Optimization  

E-Print Network (OSTI)

Energy constitutes about 20 % of the total production cost in an integrated steel mill, and therefore energy efficiency is crucial for profitability within the environmental policy context. An integrated steel mill generates high calorific value byproduct gases at varying rates. The differences between gas generation and consumption rates are compensated with gas holders. However, under certain circumstances the imbalances can lead to the flaring of excessive gas or require the purchase of supplementary fuel. This presentation describes a steel mill energy management system with sophisticated monitoring, planning, and optimization tools. It models the complex energy interconnections between various processes of the mill and determines the optimal trade-off between gas holder level control, flare minimization, and optimization of electricity purchase versus internal power generation. The system reduces energy cost, improves energy efficiency, manages carbon footprint, and provides environmental reporting features.

Makinen, K.; Kymalainen, T.; Junttila, J.

2012-01-01T23:59:59.000Z

359

Radiation of a circulating quark in strongly coupled N = 4 super Yang-Mills theory  

E-Print Network (OSTI)

The energy density and angular distribution of power radiated by a quark undergoing circular motion in strongly coupled N? = ?4 supersymmetric Yang?Mills (SYM) theory is computed using gauge?gravity duality. The results ...

Athanasiou, Christiana

360

The FreeD - A Handheld Digital Milling Device for Craft and Fabrication  

E-Print Network (OSTI)

We present an approach to combine digital fabrication and craft that is focused on a new fabrication experience. The FreeD is a hand-held, digitally controlled, milling device. It is guided and monitored by a computer while ...

Paradiso, Joseph

Note: This page contains sample records for the topic "jack wise mills" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Optimal handling of Highly Active Pharmaceutical Ingredients during milling and blending operations  

E-Print Network (OSTI)

This thesis investigates best practices for Highly Active Pharmaceutical Ingredient (HAPI) milling and blending. We utilize a qualitative analysis centering on a benchmarking study and quantitative analyses using a ...

Setty, Prashant (Prashant Neelappanavara)

2013-01-01T23:59:59.000Z

362

Design of a desktop milling machine for fabrication in an introductory machine shop class  

E-Print Network (OSTI)

The purpose of this research is to design, fabricate and test the electromechanical subsystem of a CNC milling machine kit. Unlike all other CNC kits on the market, the purpose of this kit is to teach students the principles ...

Lorenc, Dan (Daniel P.)

2010-01-01T23:59:59.000Z

363

Yang-Mills Theory Constructed from ChoFaddeevNiemi Decomposition  

E-Print Network (OSTI)

We give a new way of looking at the ChoFaddeevNiemi (CFN) decomposition of the Yang-Mills theory to answer how the enlarged local gauge symmetry respected by the CFN variables is restricted to obtain another Yang-Mills theory with the same local and global gauge symmetries as the original Yang-Mills theory. This may shed new light on the fundamental issue of the discrepancy between two theories for independent degrees of freedom and the role of the Maximal Abelian gauge in Yang-Mills theory. As a byproduct, this consideration gives new insight into the meaning of the gauge invariance and the observables, e.g., a gauge-invariant mass term and vacuum condensates of mass dimension two. We point out the implications for the SkyrmeFaddeev model.

Kei-ichi Kondo; Takeharu Murakami; Toru Shinohara

2006-01-01T23:59:59.000Z

364

Ball-milled Materials as Inert Anodes for Aluminum Production in KF ...  

Science Conference Proceedings (OSTI)

In this study, various nanostructured materials including Cu-Ni-Fe, Cu-Al-Ni-Fe based alloys and (Cu-Ni-Fe + MOx) composites were prepared by ball milling,...

365

Subject: Proposed 216(h) Regulations To: Brian.Mills@hq.doe...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

February 12, 2012 Subject: Proposed 216(h) Regulations To: Brian.Mills@hq.doe.gov and Lot.Cooke@hq.doe.gov. We appreciate the opportunity to review the Proposed Regulation for...

366

VOC Control in Kraft Mills - Final Report: Task A and Task B  

DOE Green Energy (OSTI)

The formation of volatile organic compounds (VOCs), such as methanol, in kraft mills has been an environmental concern. Methanol is soluble in water and can increase the biochemical oxygen demand. Furthermore, it can also be released into atmosphere at the process temperatures of kraft mill-streams. The Cluster Rule of the EPA now requires the control of the release of methanol in pulp and paper mills. This research program was conducted to develop a computer simulation tool for mills to predict VOC air emissions. To achieve the objective of the research program, much effort was made in the development of analytical techniques for the analysis of VOC and determination of vapor liquid partitioning coefficient of VOCs in kraft mill-streams using headspace gas chromatography. With the developed analytical tool, methanol formation in alkaline pulping was studied in laboratory to provide benchmark data of the amount of methanol formation in pulping in kraft mills and for the validation of VOC formation and vapor-liquid equilibrium submodels. Several millwide air and liquid samplings were conducted using the analytical tools developed to validate the simulation tool. The VOC predictive simulation model was developed based on the basic chemical engineering concepts, i.e., reaction kinetics, vapor liquid equilibrium, combined with computerized mass and energy balances. Four kraft mill case studies (a continuous digester, two brownstock washing lines, and a pre-evaporator system) are presented and compared with mill measurements. These case studies provide valuable, technical information for issues related to MACT I and MACT II compliance, such as condensate collection and Clean-Condensate-Alternatives (CCA).

Zhu, J.Y.; Chai, X.-S.; Edwards, L.L.; Gu, Y.; Teja, A.S.; Kirkman, A.G.; Pfromm, P.H.; Rezac, M.E.

2001-09-26T23:59:59.000Z

367

Accepting Mixed Waste as Alternate Feed Material for Processing and Disposal at a Licensed Uranium Mill  

SciTech Connect

Certain categories of mixed wastes that contain recoverable amounts of natural uranium can be processed for the recovery of valuable uranium, alone or together with other metals, at licensed uranium mills, and the resulting tailings permanently disposed of as 11e.(2) byproduct material in the mill's tailings impoundment, as an alternative to treatment and/or direct disposal at a mixed waste disposal facility. This paper discusses the regulatory background applicable to hazardous wastes, mixed wastes and uranium mills and, in particular, NRC's Alternate Feed Guidance under which alternate feed materials that contain certain types of mixed wastes may be processed and disposed of at uranium mills. The paper discusses the way in which the Alternate Feed Guidance has been interpreted in the past with respect to processing mixed wastes and the significance of recent changes in NRC's interpretation of the Alternate Feed Guidance that sets the stage for a broader range of mixed waste materials to be processed as alternate feed materials. The paper also reviews the le gal rationale and policy reasons why materials that would otherwise have to be treated and/or disposed of as mixed waste, at a mixed waste disposal facility, are exempt from RCRA when reprocessed as alternate feed material at a uranium mill and become subject to the sole jurisdiction of NRC, and some of the reasons why processing mixed wastes as alternate feed materials at uranium mills is preferable to direct disposal. Finally, the paper concludes with a discussion of the specific acceptance, characterization and certification requirements applicable to alternate feed materials and mixed wastes at International Uranium (USA) Corporation's White Mesa Mill, which has been the most active uranium mill in the processing of alternate feed materials under the Alternate Feed Guidance.

Frydenland, D. C.; Hochstein, R. F.; Thompson, A. J.

2002-02-26T23:59:59.000Z

368

Surface-invariants in 2D classical Yang-Mills theory  

Science Conference Proceedings (OSTI)

We study a method to obtain invariants under area-preserving diffeomorphisms associated to closed curves in the plane from classical Yang-Mills theory in two dimensions. Taking as starting point the Yang-Mills field coupled to nondynamical particles carrying chromo-electric charge, and by means of a perturbative scheme, we obtain the first two contributions to the on-shell action, which are area-invariants. A geometrical interpretation of these invariants is given.

Diaz, Rafael; Fuenmayor, E.; Leal, Lorenzo [Escuela de Matematicas, Facultad de Ciencias, Universidad Central de Venezuela, AP 20513, Caracas 1020-A (Venezuela); Centro de Fisica Teorica y Computacional, Facultad de Ciencias, Universidad Central de Venezuela, AP 47270, Caracas 1041-A (Venezuela)

2006-03-15T23:59:59.000Z

369

Phase I Energy Targeting Study Using Pinch Analysis: Kamloops Pulp Mill  

Science Conference Proceedings (OSTI)

On behalf of EPRI and Global Energy Partners, American Process Inc. (API) carried out an energy targeting study using pinch analysis at Kamloops Pulp Mill. API constructed complete process flow diagrams and a partial simulation model of the steam and condensate system and of the warm and hot water systems. The heat recovery opportunities were quantified and a new condensing turbine was evaluated by incorporating the mill data from October 24, 2001. This data was assumed to be representative of year-round...

2003-08-25T23:59:59.000Z

370

DeconfinementinYang-Mills: a conjecture for a general gauge Lie group G  

E-Print Network (OSTI)

Svetitsky and Yaffe have argued that if the deconfinement phase transition of a (d+1)-dimensional Yang-Mills theory with gauge group G is second order it should be in the universality class of a d-dimensional scalar model symmetric under the center C(G) of G. These arguments have been investigated numerically only considering Yang-Mills theory with gauge symmetry in the G = SU(N) branch, where C(G) = Z(N). The symplectic groups Sp(N) provide another extension of SU(2) = Sp(1) to general N and they all have the same center Z(2). Hence, in contrast to the SU(N) case, Sp(N) Yang-Mills theory allows to study the relevance of the group size on the order of the deconfinement phase transition keeping the available universality class fixed. Using lattice simulations, we present numerical results for the deconfinement phase transition in Sp(2) and Sp(3) Yang-Mills theories both in (2+1)d and (3+1)d. We then make a conjecture on the order of the deconfinement phase transition in Yang-Mills theories with general Lie groups SU(N), SO(N), Sp(N) and with exceptional groups G(2), F(4), E(6), E(7), E(8). Numerical results for G(2) Yang-Mills theory at finite temperature in (3 + 1)d are also presented.

M. Pepe A

2004-01-01T23:59:59.000Z

371

Mass gap in quantum energy-mass spectrum of relativistic Yang-Mills fields  

E-Print Network (OSTI)

A relativistic quantum Yang-Mills theory with a simple compact gauge Lie group on the four-dimensional Minkowski spacetime is set up in a framework of infinite-dimensional pseudodifferential operators in a nuclear Kree-Gelfand triple. The linear quantum Yang-Mills energy-mass operator is defined as the anti-normal quantization of the non-linear Yang-Mills energy-mass functional of consrained Cauchy data supported by an euclidean ball of a radius R. It is shown that expectation functional of the Yang-Mills energy-mass operator majorises the expectation functional of a scaled occupation number operator so that, by variational spectral principles, the quantum Yang-Mills spectral mass gap is positive. The mass gap is proportional to 1/R. The running coupling constant is proportional to the square root of R, leading to an asymptotic freedom for quantum Yang-Mills theory at short distances. This mathematically rigorous theory is non-perturbative and provides a solution for the 7th Clay Institute Millennium problem.

Alexander Dynin

2013-08-29T23:59:59.000Z

372

Numerical investigation of the grinding process in a Beater Wheel mill with classifier  

SciTech Connect

A numerical investigation is presented for a two-dimensional simulation of the gas flow field and of the dynamic behavior of lignite particles inside Beater Wheel mills with classifier, installed in large coal-fired plants. A large number of representative particles are tracked using Lagrangian equations of motion, in combination with a stochastic model for particle turbulent dispersion. All the important mechanisms associated with the particle motion through the mill (particle-surface collisions and rebounding phenomena, fuel moisture evaporation and erosion wear of internal surfaces) are modeled. A special model is constructed to simulate the fragmentation of impacting particles and to calculate the size distribution of the final mill product. The models are regulated on the basis of available data from grinding mills of the Greek lignite power stations. The numerical code is capable of predicting the locations of significant erosion and to estimate the amount of particle mass that circulates through the mill via the classifying chamber. Mean impact velocity and impingement angle distributions along all the internal surfaces are also provided. The results indicate remarkable differences in the extent of the erosion caused at different locations of the mill. Also, the significant role of the leading blades arrangement inside the classifier on its classification performance and efficiency is elucidated.

Anagnostopoulos, J.; Bergeles, G. [National Technical Univ. of Athens (Greece)

1997-07-01T23:59:59.000Z

373

Load-carrying capacity of oils for rolling mills  

SciTech Connect

This article reports on an investigation of the loadcarrying capacity of the compounded oils Pp-6, Pp-17, and Pp-28 that have been developed for liquid-friction bearings (LFB) as compared to nonadditive oils. A PZhT-140-300 single-roll stand for the lubrication of a regular-production PZhT-180 bearing was used in the study. The load/sliding speed curves obtained from the test oil were compared with the theoretical curve for the load-carrying capacity of the LFB for nonadditive oil and the curve obtained for the oil base stock at the corresponding viscosity level. It is determined that the compounded oils examined are 15-25% better in terms of load-carrying capacity than the oil base stocks, and 20-25% better than the nonadditive oils. The results demonstrate that the introduction of additives increases the load-carrying capacity of oils for LFBs in rolling mills by 20-25%, depending on viscosity.

Grigor' eva, N.I.; Badyshtova, K.M.; Ivankina, E.B.; Kolobov, N.I.; Toloka, V.I.

1984-07-01T23:59:59.000Z

374

Thermal Ground State in Yang-Mills Thermodynamics  

Science Conference Proceedings (OSTI)

We derive an a useful priori estimate for the thermal ground state of deconfining phase of SU(2) Yang-Mills thermodynamics in four-dimensional, flat spacetime and discuss its implications. Upon a selfconsistent spatial coarse-graining over noninteracting, trivial-holonomy (BPS saturated)(anti)calorons of unit topological charge modulus an inert, adjoint scalar field |{phi}| and an effective pure-gauge configuration a{sub {mu}}{sup gs} emerge. The modulus |{phi}|>0 defines the maximal resolution in the coarse-grained theory and induces dynamical gauge-symmetry breaking. Thanks to perturbative renormalizability and the fact that |{phi}| can not absorb or emit energy-momentum the effective action is local and simple. The temperature dependence of the effective coupling is a consequence of thermodynamical consistency and describes the Coulomb screening of a static test charge due to short-lived monopole-antimonopole pairs. The latter occur unresolvably as small-holonomy excitations of (anti)calorons by the absorption of propagating fundamental gauge fields.

Hofmann, Ralf [ITP, Universitaet Heidelberg, Philosophenweg 16, 69120 Heidelberg (Germany)

2011-09-22T23:59:59.000Z

375

Volume dependence in 2+1 Yang-Mills theory  

E-Print Network (OSTI)

We present the results of an analysis of a 2+1 dimensional pure SU(N) Yang-Mills theory formulated on a 2-dimensional spatial torus with non-trivial magnetic flux. We focus on investigating the dependence of the electric-flux spectrum, extracted from Polyakov loop correlators, with the spatial size l, the number of colours N, and the magnetic flux m. The size of the torus acts a parameter that allows to control the onset of non-perturbative effects. In the small volume regime, where perturbation theory holds, we derive the one-loop self-energy correction to the single-gluon spectrum, for arbitrary N and m. We discuss the transition from small to large volumes that has been investigated by means of Monte-Carlo simulations. We argue that the energy of electric flux e, for the lowest gluon momentum, depends solely on e/N and on the dimensionless variable x=lambda N l, with lambda the 't Hooft coupling. The variable x can be interpreted as the dimensionless 't Hooft coupling for an effective box size given by Nl. This implies a version of reduction that allows to trade l by N without modifying the electric-flux energy.

Margarita Garcia Perez; Antonio Gonzalez-Arroyo; Masanori Okawa

2012-11-05T23:59:59.000Z

376

Uranium Mill Tailings Remedial Action Project 1994 environmental report  

Science Conference Proceedings (OSTI)

This annual report documents the Uranium Mill Tailings Remedial Action (UMTRA) Project environmental monitoring and protection program. The UMTRA Project routinely monitors radiation, radioactive residual materials, and hazardous constituents at associated former uranium tailings processing sites and disposal sites. At the end of 1994, surface remedial action was complete at 14 of the 24 designated UMTRA Project processing sites: Canonsburg, Pennsylvania; Durango, Colorado; Grand Junction, Colorado; Green River Utah, Lakeview, Oregon; Lowman, Idaho; Mexican Hat, Utah; Riverton, Wyoming; Salt Lake City, Utah; Falls City, Texas; Shiprock, New Mexico; Spook, Wyoming, Tuba City, Arizona; and Monument Valley, Arizona. Surface remedial action was ongoing at 5 sites: Ambrosia Lake, New Mexico; Naturita, Colorado; Gunnison, Colorado; and Rifle, Colorado (2 sites). Remedial action has not begun at the 5 remaining UMTRA Project sites that are in the planning stage. Belfield and Bowman, North Dakota; Maybell, Colorado; and Slick Rock, Colorado (2 sites). The ground water compliance phase of the UMTRA Project started in 1991. Because the UMTRA Project sites are.` different stages of remedial action, the breadth of the UMTRA environmental protection program differs from site to site. In general, sites actively undergoing surface remedial action have the most comprehensive environmental programs for sampling media. At sites where surface remedial action is complete and at sites where remedial action has not yet begun, the environmental program consists primarily of surface water and ground water monitoring to support site characterization, baseline risk assessments, or disposal site performance assessments.

NONE

1995-08-01T23:59:59.000Z

377

Biorefinery Concept Development Based On Wheat Flour Milling  

DOE Green Energy (OSTI)

A new process is being developed to extract starch from millfeed, the low-value byproduct of wheat flour milling, and convert it to glucose through enzymatic processing. The millfeed-derived glucose will then be converted to value-added products, such as polyol, through a catalytic process, or lactic acid, through a fermentation process. The starch (glucose) recovery process has been tested through the pilot scale. Catalytic and fermentation processes have been tested in the laboratory. The process developed for glucose recovery from wheat millfeed includes hot water extraction of starch and filtration of a fibrous animal feed coproduct, followed by enzymatic liquefaction and saccharification of the extracted starch, with filtration of a high-protein coproduct. The bench-scale tests showed that a glucose yield of approximately 30% on a dry millfeed basis could be achieved, which corresponds to the recovery of essentially all the glucose value in the millfeed. Glucose yields with the pilot-scale system were comparable, although filtration was more difficult.

Elliott, Douglas C.; Orth, Rick J.; Gao, Johnway; Werpy, Todd A.; Eakin, David E.; Schmidt, Andrew J.; Neuenschwander, Gary G.

2002-04-07T23:59:59.000Z

378

Analytical approach to SU(2) Yang-Mills thermodynamics  

E-Print Network (OSTI)

We propose an analytical approach to SU(2) Yang-Mills thermodynamics. The existence of a macroscopic and rigid adjoint Higgs field, generated by dilute trivial-holonomy calorons at large temperature $T$ (electric phase), implies a twofold degeneracy of the ground state which signals a broken electric $Z_2$ symmetry. A finite energy density $\\propto T$ of the ground state arises due to caloron interaction. An evolution equation for the effective gauge coupling, derived from thermodynamical self-consistency, predicts a second-order like transition (seen in lattice simulations) at $T_c$ to a phase where monopoles are condensed and off-Cartan excitations decoupled. In this magnetic phase the ground state is unique and dominates the pressure (negative total pressure). While the magnetic phase has a massive, propagating 'photon' it confines fundamental matter (pre-confinement). The temperature dependence of the magnetic gauge coupling predicts the transition to the confining phase at $T_C\\sim \\frac{T_c}{1.9}$ where center-vortex loops condense and the 'photon' decouples. We believe that this transition is 'swallowed' by finite-size artefacts in lattice simulations. No thermodynamical connection exists between the confining and the magnetic phase.

Ralf Hofmann

2004-08-10T23:59:59.000Z

379

Radon-222 emissions and control practices for licensed uranium mills and their associated tailings piles. Final report  

SciTech Connect

The report is organized into five main sections. The conclusions of the effort are summarized in Chapter 2. A general description of current milling and tailings management practices and a summary of the site-specific characteristics of operating and standby uranium mills are contained in Chapter-3. The sources and emission rates of radon-222 at licensed mills and their associated tailings piles are contained in Chapter 4 along with the results of an effort to develop generic procedures to estimate radon-222 emissions for milling operations and tailings disposal. Control practices that are being or could be applied to the milling operation and tailings disposal areas and their estimated cost and effectiveness in reducing radon-222 emissions are presented in Chapter 5. The appendices contain detailed information on mill site data and emission estimates.

Not Available

1985-06-01T23:59:59.000Z

380

Remedial action plan and site design for stabilization of the inactive uranium mill tailings site at Tuba City, Arizona: Phase 2, Construction, Subcontract documents: Appendix E, final report. [Uranium Mill Tailings Remedial Action (UMTRA) Project  

Science Conference Proceedings (OSTI)

This appendix discusses Phase II construction and subcontract documents uranium mill site near Tuba City, Arizona. It contains the bid schedule, special conditions, specifications, and subcontract drawings.

Not Available

1989-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "jack wise mills" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Energy Analysis of a Kraft Pulp Mill: Potential for Energy Efficiency and Advanced Biomass Cogeneration  

E-Print Network (OSTI)

Energy use at a Kraft pulp mill in the United States is analyzed in detail. Annual average process steam and electricity demands in the existing mill are 19.3 MMBtu per ADST and 687 kWh per ADST, respectively. This is relatively high by industry standards. The mill meets nearly all its electricity needs with a back-pressure steam turbine. Higher electricity to heat ratios is an industry wide trend and anticipated at the mill. The potential for self-sufficiency in energy using only black liquor and bark available on-site is assessed based on the analysis of the present energy situation and potential process changes. The analysis here suggests that steam and electricity demand could be reduced by 89% by operating consistently at high production rates. Process modifications and retrofits using commercially proven technologies could reduce steam and electricity demand to as low as 9.7 MMBtu per ADST, a 50% reduction, and 556 kWh per ADST, a 19% reduction, respectively. Electricity demand could increase to about 640 kWh per ADST due to closed-cycle operation of the bleach plant and other efforts to improve environmental performance. The retrofitted energy efficient mill with low environmental impact could be self-sufficient in steam and electricity using conventional technology, such as a back pressure steam turbine or a condensing extraction steam turbine. In addition to meeting mill energy demand, about 1,000 kWh per ADST would be available for export from the mill if gasification/combined cycle technology were used instead.

Subbiah, A.; Nilsson, L. J.; Larson, E. D.

1995-04-01T23:59:59.000Z

382

Final report: Research project chemical milling of counterbore recesses in the uranium wall of Zircaloy-2 clad uranium tubes  

SciTech Connect

This report discusses the development of an etchant composition to chemically mill counterbore recesses in each end of the uranium walls of Zircaloy-2 clad uranium tubes.

Atkins, D.C. [United States Chemical Milling Corp., Manhattan Beach, CA (United States)

1994-07-01T23:59:59.000Z

383

Performance Assessment and Recommendations for Rejuvenation of a Permeable Reactive Barrier: Cotter Corporations Caon City, Colorado, Uranium Mill  

Energy.gov (U.S. Department of Energy (DOE))

Performance Assessment and Recommendations for Rejuvenation of a Permeable Reactive Barrier: Cotter Corporations Canon City, Colorado, Uranium Mill (April 2005)

384

Annual status report on the Uranium Mill Tailings Remedial Action Program  

SciTech Connect

This fourteenth annual status report for the Uranium Mill Tailings Remedial Action (UMTRA) Project Office summarizes activities of the Uranium Mill Tailings Remedial Action Surface (UMTRA-Surface) and Uranium Mill Tailings Remedial Action Groundwater (UMTRA-Groundwater) Projects undertaken during fiscal year (FY) 1992 by the US Department of Energy (DOE) and other agencies. Project goals for FY 1993 are also presented. An annual report of this type was a statutory requirement through January 1, 1986, pursuant to the Uranium Mill Tailings Radiation Control Act (UMTRCA) of 1978, Public Law (PL) 95-604. The DOE will continue to submit annual reports to DOE-Headquarters, the states, tribes, and local representatives through Project completion in order to inform the public of the yearly Project status. The purpose of the remedial action is to stabilize and control the tailings and other residual radioactive material (RRM) located on the inactive uranium processing sites in a safe and environmentally sound manner, and to minimize or eliminate potential health hazards. Commercial and residential properties near designated processing sites that are contaminated with material from the sites, herein referred to as ``vicinity properties (VP),`` are also eligible for remedial action. Included in the UMTRA Project are 24 inactive uranium processing sites and associated VPs located in 10 states, and the VPs associated with the Edgemont, South Dakota, uranium mill currently owned by the Tennessee Valley Authority (TVA) (Figure A.1, Appendix A).

Not Available

1992-12-01T23:59:59.000Z

385

Asymptotically Free Yang-Mills Classical Mechanics with Self-Linked Orbits  

E-Print Network (OSTI)

We construct a classical mechanics Hamiltonian which exhibits spontaneous symmetry breaking akin the Coleman-Weinberg mechanism, dimensional transmutation, and asymptotically free self-similarity congruent with the beta-function of four dimensional Yang-Mills theory. Its classical equations of motion support stable periodic orbits and in a three dimensional projection these orbits are self-linked into topologically nontrivial, toroidal knots. The non-perturbative structure of four dimensional Yang-Mills theory continues to be the subject of extensive investigations. A major goal is the understanding of large distance properties such as color confinement, mass gap and the glueball spectrum. The Yang-Mills theory has also a number of well established salient features like ultraviolet asymptotic freedom and the presence of finite action instantons. Here we shall introduce a classical mechanics Hamiltonian which contains many incredients of the four dimensional Yang-Mills field theory, even though it is defined in a four dimensional phase space. These include asymptotically free self-similarity with a coupling constant that flows like the one loop coupling constant of four dimensional Yang-Mills theory, dimensional transmutation, and spontaneous symmetry breaking akin the Coleman-Weinberg mechanism. Furthermore, we find that its Hamiltons equations support stable periodic

M. Lbcke; A. J. Niemi; K. Torokoff

2008-01-01T23:59:59.000Z

386

Optimizing the Utility System of a Tissue Paper Mill Using Pinch Technology  

E-Print Network (OSTI)

A tissue paper mill in southern California had existing utility demands of 7.1 MW for the tissue mill (13 MW for the whole site), and 55 MM Btu/hr of fuel gas for the steam boiler. Total utility costs were $12 MM per year. The mill was seriously considering an 11 MW cogeneration system as a means of reducing operating costs. The expected benefits of the cogeneration project were $5.5 MM/yr of savings for an investment of $9 MM. A "pinch" study of the mill was initiated by SCE, with the customer's consent, to explore viable alternative projects that would result in comparable savings at equal or better payback and lower risk. The study identified a group of ten inter-related projects, including process heat recovery, a waste heat boiler and a 2.5 MW gas turbine. Combined savings were $4.5 MM/yr (37% of existing bill) at an estimated capital cost of $6.6 MM. The recommended approach was considered more attractive by the paper mill than the original plan because: (a) the benefits were obtained in a number of different areas -reduced fuel use, reduced power cost, reduced water makeup, reduced wastewater discharge to sewer, and reduced solid wastes to landfill (b) the smaller projects involved lower technical and economic risk, and were easier to implement.

Kumana, J. D.; Sung, R. D.

1989-09-01T23:59:59.000Z

387

Preliminary assessment of off-season fuels for electricity generation at Indian sugar mills  

DOE Green Energy (OSTI)

This report on off-season fuels is part of a preliminary feasibility assessment to retrofit Indian sugar mills to cogenerate heat and power with sales of excess electricity to the local grid. To justify the high capital costs of retrofitting existing facilities, sugar mill operators must attempt to maximize the amount of power they sell to the local grid. This fact means that sugar mills must operate and sell power well-beyond the milling season, which typically lasts about 200 days. The purpose of this report is to assess and determine whether low cost and reliable sources of off-season fuels can be secured for two sugar mills (Simbhaoli and Daurala) within their respective sugar growing districts, located in western Uttar Pradesh. Off-season fuels under consideration include excess bagasse that is stored for off-season use, agricultural field residues (e.g., wheat straw), forest residues (e.g., bark and small limbs), and dedicated energy crops (short-rotation woody crops and herbaceous energy crops). Results of the pre-feasibility indicate that bagasse and some agricultural residues are available in sufficient quantity and may be available at reasonable cost.

Perlack, R.D. [Oak Ridge National Lab., TN (United States); Ranney, J.W. [Joint Inst. for Energy and Environment, Knoxville, TN (United States)

1995-11-07T23:59:59.000Z

388

Similarities and differences in the microstructure of attritor-milled Fe-Al-N compositions  

Science Conference Proceedings (OSTI)

Although numerous studies of high-energy, ball-milled metal powders have been conducted, to date few studies have characterized the mechanical processing of identical elemental compositions of prealloyed powders and of powder blends. This study reports on the mechanical processing (attritor ball milling) in argon and nitrogen gas environments of (a) iron powder and prealloyed iron2 wt.% aluminum powder, and (b) iron-aluminum, iron-aluminum nitride, and iron-iron nitride powder blends. When nitrogen was milled into iron particles either from nitride powder or by gas infusion, the nitrogen dissolved interstitially in bcc-Fe (principally at the grain boundaries) or was present as bct-Fe nanoparticles at the bcc-Fe nanograin boundaries. The resulting nitrogen distribution was independent of how the nitrogen was added. Milled blends of iron and aluminum powder and prealloyed iron-aluminum powder resulted in similar microstructures: micrometer size particles with similar nanograin size. The aluminum in the blended powder mixture developed an ultrafine distribution on the grain boundaries, but it did not become uniformly distributed within the bcc-Fe grains. In contrast, the aluminum in prealloyed FeAl powder remained in solid solution during the mechanical milling.

Rawers, J.C.; Cook, D.C. (Old Dominion U., Norfolk, VA)

1997-04-01T23:59:59.000Z

389

Moab Project Disposes 2 Million Tons of Uranium Mill Tailings with Recovery Act Funds  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

The Moab Uranium Mill Tailings Remedial Action The Moab Uranium Mill Tailings Remedial Action Project reached its primary American Recovery and Reinvestment Act milestone ahead of schedule on Wednesday with the disposal of 2 million tons of uranium mill tailings. The project had originally planned to ship 2 million tons of tailings with Recovery Act funds. Now, Recovery Act workers are surpass- ing that goal. "Although shipping 2 million tons was the original Recovery Act goal, we are planning to exceed this goal by shipping about 300,000 tons more using savings resulting from efficiencies we've gained in our first 2 years of moving tailings," Moab Federal Project Director Donald Metzler said. The project is using $108 million from the Recovery Act to move the tailings from the banks of the Colorado River by rail to a permanent

390

Monticello Mill Tailings Site Operable Unit I11 Remedial Investigation Addendum1  

Office of Legacy Management (LM)

Monticello Mill Tailings Site Monticello Mill Tailings Site Operable Unit I11 Remedial Investigation Addendum1 Focused Feasibility Study January 2004 Prepared by U.S. Department of Energy Grand Junction, Colorado Work performed under DOE Contract No. DE-AC1342GJ79491 DOE Task Order No. ST03-205 Document N u m b e r Q0029500 S i g t ~ a t u r e Page Signature Page Monticello Mill Tailings Site Operable Unit I11 Remedial Investigation Addendud Focused Feasibility Study January 2004 Submitted By: Arthur W. Kleinrath, Project Manager U.S. Department of Energy, Grand Junction, Colorado U.S. Department of Energyat Gmnd Junction MMTS OU 111 Remedial Investigation AddendutdFocuscd Feasibilily Study January 2004 Final iii This page intentionally left blank Document Number Q0029500 Contents U.S. Department of Energy at Grand Junction MMTS OU III Remedial Investigation Addendum/Focused Feasibility Study

391

Scientific basis for risk assessment and management of uranium mill tailings  

Science Conference Proceedings (OSTI)

A National Research Council study panel, convened by the Board on Radioactive Waste Management, has examined the scientific basis for risk assessment and management of uranium mill tailings and issued this final report containing a number of recommendations. Chapter 1 provides a brief introduction to the problem. Chapter 2 examines the processes of uranium extraction and the mechanisms by which radionuclides and toxic chemicals contained in the ore can enter the environment. Chapter 3 is devoted to a review of the evidence on health risks associated with radon and its decay products. Chapter 4 provides a consideration of conventional and possible new technical alternatives for tailings management. Chapter 5 explores a number of issues of comparative risk, provides a brief history of uranium mill tailings regulation, and concludes with a discussion of choices that must be made in mill tailing risk management. 211 refs., 30 figs., 27 tabs.

Not Available

1986-01-01T23:59:59.000Z

392

Radiological survey of the inactive uranium-mill tailings at Rifle, Colorado  

Science Conference Proceedings (OSTI)

Results of radiological surveys of two inactive uranium-mill sites near Rifle, Colorado, in May 1976 are presented. These sites are referred to as Old Rifle and New Rifle. The calculated /sup 226/Ra inventory of the latter site is much higher than at the older mill location. Data on above-ground measurements of gamma exposure rates, surface and near-surface concentration of /sup 226/Ra in soil and sediment samples, concentration of /sup 226/Ra in water, calculated subsurface distribution of /sup 226/Ra, and particulate radionuclide concentrations in air samples are given. The data serve to define the extent of contamination in the vicinity of the mill sites and their immediate surrounding areas with tailings particles. Results of these measurements were utilized as technical input for an engineering assessment of these two sites.

Haywood, F.F.; Jacobs, D.J.; Ellis, B.S.; Hubbard, H.M. Jr.; Shinpaugh, W.H.

1980-06-01T23:59:59.000Z

393

Assessment of the radiological impact of the inactive uranium-mill tailings at Mexican Hat, Utah  

SciTech Connect

High surface soil concentrations of /sup 226/Ra and high above-ground measurements of gamma-ray intensity in the vicinity of the inactive uranium-mill tailings at Mexican Hat show both wind and water erosion of the tailings. The former mill area, occupied by a trade school at the time of this survey, shows a comparatively high level of contamination, probably from unprocessed ore on the surface of the ore storage area near the location of the former mill buildings. However, the estimated health effect of exposure to gamma rays during a 2000-hr work year in the area represents an increase of 0.1% in the risk of death from cancer. Exposure of less than 600 persons within 1.6 km of the tailings to radon daughters results in an estimated 0.2%/year increase in risk of lung cancer.

Haywood, F.F.; Goldsmith, W.A.; Ellis, B.S.; Hubbard, H.M. Jr.; Fox, W.F.; Shinpaugh, W.H.

1980-03-01T23:59:59.000Z

394

Higgs potential and confinement in Yang-Mills theory on exotic R^4  

E-Print Network (OSTI)

We show that pure SU(2) Yang-Mills theory formulated on certain exotic R^4 from the radial family shows confinement. The condensation of magnetic monopoles and the qualitative form of the Higgs potential are derived from the exotic R^4, e. A relation between the Higgs potential and inflation is discussed. Then we obtain a formula for the Higgs mass and discuss a particular smoothness structure so that the Higgs mass agrees with the experimental value. The singularity in the effective dual U(1) potential has its cause by the exotic 4-geometry and agrees with the singularity in the maximal abelian gauge scenario. We will describe the Yang-Mills theory on e in some limit as the abelian-projected effective gauge theory on the standard R^4. Similar results can be derived for SU(3) Yang-Mills theory on an exotic R^4 provided dual diagonal effective gauge bosons propagate in the exotic 4-geometry.

Torsten Asselmeyer-Maluga; Jerzy Krl

2013-03-07T23:59:59.000Z

395

SURFACE GENERATION ANALYSIS IN MICRO END-MILLING CONSIDERING THE INFLUENCES OF GRAIN  

E-Print Network (OSTI)

Micro end-milling method is a universal micro manufacturing method, which can be used to fabricating complex 3D structures and parts with many materials. But compared with their micrometer order size, their surface roughness quality is not satisfied. In this paper, the different metal phase grains influences are researched, and the micro end-milling process is described while the material is anisotropic. In this paper, the physical characteristics of different grains, especially friction coefficient ? and elastic module E, are very critical to determine the chip formation process and surface generation. The chip is often discontinues because of the grain boundary effect. Through the micro end-milling experiment, the bottom surface results correlate very well with the theory analysis. 1.

Jinsheng Wang

2008-01-01T23:59:59.000Z

396

Swarming, Schooling, Milling: Phase diagram of a data-driven fish school model  

E-Print Network (OSTI)

We determine the basic phase diagram of the fish school model derived from data by Gautrais etal (PLoS Comp. Biol. 8, e1002678 (2012)), exploring its parameter space beyond the parameter values determined experimentally on groups of barred flagtails (Kuhlia mugil}) swimming in a shallow tank. A modified model is studied alongside the original one, in which an additional frontal preference is introduced in the stimulus/response function to account for the angular weighting of interactions. Our study, mostly limited to groups of moderate size (in the order of 100 individuals), focused not only on the transition to schooling induced by increasing the swimming speed, but also on the conditions under which a school can exhibit milling dynamics and the corresponding behavioral transitions. We show the existence of a transition region between milling and schooling, in which the school exhibits multistability and intermittency between schooling and milling for the same combination of individuals parameters. We also s...

Calovi, Daniel S; Ngo, Sandrine; Sire, Clment; Chat, Hugues; Theraulaz, Guy

2013-01-01T23:59:59.000Z

397

DOE Awards Contract for Moab Mill Tailings Cleanup | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Moab Mill Tailings Cleanup Moab Mill Tailings Cleanup DOE Awards Contract for Moab Mill Tailings Cleanup November 4, 2011 - 12:00pm Addthis Media Contact Bill Taylor bill.taylor@srs.gov 803-952-8564 Cincinnati- The Department of Energy (DOE) announced today that it has awarded a competitive small business contract worth $121.2 million over the next five years as part of the Department's continued efforts to protect the Colorado River and downstream water users by removing uranium tailings at the former Atlas uranium-ore processing facility in Moab, Utah. Portage, Inc., a small business based in Idaho Falls, Idaho, will be leading the new contract. "The Moab project has the potential of being one of the Department of Energy's most successful environmental cleanup projects," Donald

398

Pulp and Paper Mills: Profiting for Efficient Motor System Use | ENERGY  

NLE Websites -- All DOE Office Websites (Extended Search)

Pulp and Paper Mills: Profiting for Efficient Motor System Use Pulp and Paper Mills: Profiting for Efficient Motor System Use Secondary menu About us Press room Contact Us Portfolio Manager Login Facility owners and managers Existing buildings Commercial new construction Industrial energy management Small business Service providers Service and product providers Verify applications for ENERGY STAR certification Design commercial buildings Energy efficiency program administrators Commercial and industrial program sponsors Associations State and local governments Federal agencies Tools and resources Training In This Section Campaigns Commercial building design Communications resources Energy management guidance Financial resources Portfolio Manager Products and purchasing Recognition Research and reports Service and product provider (SPP) resources

399

Microsoft Word - PS-MST-MILLING-2012-05-22.doc  

NLE Websites -- All DOE Office Websites (Extended Search)

71.doc 1 (03/2012) 71.doc 1 (03/2012) BROOKHAVEN NATIONAL LABORATORY MACHINE SHOP SAFE WORK PRACTICES EVALUATION FORM Dept./Div.: PS______ Machine: PhoSci MSJPM Milling Machine (PS-MST-MILLING) Machine Shop Supervisor's Name(s): Employee Name: _________________________________ Life Number: Competencies Date Completed Evaluated By (Initials) Comments 1. State BNL policy for use of eye protection in machine shops. 2. Identify main disconnect for tool and explain the requirement for access to it. 3. Identify all controls and describe their functions. 4. Identify all machine guards and describe their functions. 5. Explain the process when defects are found. 6. Demonstrate safe work practices while performing

400

311221," Wet Corn Milling",0,0,"X",0  

U.S. Energy Information Administration (EIA) Indexed Site

3 Relative Standard Errors for Table 11.3;" 3 Relative Standard Errors for Table 11.3;" " Unit: Percents." " "," ",,,"Renewable Energy" " "," ",,,"(excluding Wood" "NAICS"," ","Total Onsite",,"and" "Code(a)","Subsector and Industry","Generation","Cogeneration(b)","Other Biomass)(c)","Other(d)" ,,"Total United States" 311,"Food",2.8,1.1,86.8,37.8 3112," Grain and Oilseed Milling",0.7,0.7,"X",0 311221," Wet Corn Milling",0,0,"X",0 31131," Sugar Manufacturing",0,0,"X",0 3114," Fruit and Vegetable Preserving and Specialty Foods ",1.2,1.2,"X",44.1

Note: This page contains sample records for the topic "jack wise mills" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Vibration mills in the manufacturing technology of slurry fuel from unbeneficiated coal sludge  

Science Conference Proceedings (OSTI)

Coal-water slurry fuel (CWSF) is economically viable provided that its ash content does not exceed 30% and the amount water in the fuel is at most 45%. Two impoundments were revealed that have considerable reserves of waste coal useful for commercial manufacture of CWSF without the beneficiation step. One of the CWSF manufacture steps is the comminution of coal sludge to have a particle size required by the combustion conditions. Vibration mills, which are more compact and energy-intensive that drum mills, can be used in the CWSG manufacture process. The rheological characteristics of CWSF obtained from unbeneficiated waste coal were determined.

E.G. Gorlov; A.I. Seregin; G.S. Khodakov [Institute for Fossil Fuels, Moscow (Russia)

2008-08-15T23:59:59.000Z

402

Optimal Cluster Mill Pass Scheduling With an Accurate and Rapid New Strip Crown Model  

Science Conference Proceedings (OSTI)

Besides the requirement to roll coiled sheet at high levels of productivity, the optimal pass scheduling of cluster-type reversing cold mills presents the added challenge of assigning mill parameters that facilitate the best possible strip flatness. The pressures of intense global competition, and the requirements for increasingly thinner, higher quality specialty sheet products that are more difficult to roll, continue to force metal producers to commission innovative flatness-control technologies. This means that during the on-line computerized set-up of rolling mills, the mathematical model should not only determine the minimum total number of passes and maximum rolling speed, it should simultaneously optimize the pass-schedule so that desired flatness is assured, either by manual or automated means. In many cases today, however, on-line prediction of strip crown and corresponding flatness for the complex cluster-type rolling mills is typically addressed either by trial and error, by approximate deflection models for equivalent vertical roll-stacks, or by non-physical pattern recognition style models. The abundance of the aforementioned methods is largely due to the complexity of cluster-type mill configurations and the lack of deflection models with sufficient accuracy and speed for on-line use. Without adequate assignment of the pass-schedule set-up parameters, it may be difficult or impossible to achieve the required strip flatness. In this paper, we demonstrate optimization of cluster mill pass-schedules using a new accurate and rapid strip crown model. This pass-schedule optimization includes computations of the predicted strip thickness profile to validate mathematical constraints. In contrast to many of the existing methods for on-line prediction of strip crown and flatness on cluster mills, the demonstrated method requires minimal prior tuning and no extensive training with collected mill data. To rapidly and accurately solve the multi-contact problem and predict the strip crown, a new customized semi-analytical modeling technique that couples the Finite Element Method (FEM) with classical solid mechanics was developed to model the deflection of the rolls and strip while under load. The technique employed offers several important advantages over traditional methods to calculate strip crown, including continuity of elastic foundations, non-iterative solution when using predetermined foundation moduli, continuous third-order displacement fields, simple stress-field determination, and a comparatively faster solution time.

Malik, Arif S.; Grandhi, Ramana V. [Dept. of Mechanical Engineering, Wright State University, 3640 Col. Glenn Hwy., Dayton, OH 45435 (United States); Zipf, Mark E. [Intergrated Industrial Systems, Inc., 475 Main St., Yalesville, CT 06492 (United States)

2007-05-17T23:59:59.000Z

403

The S-matrix and graviton self-energy in quantum Yang-Mills gravity  

E-Print Network (OSTI)

The S-matrix, its unitarity and the graviton self-energy at the one-loop level are discussed on the basis of quantum Yang-Mills gravity with the translational gauge symmetry in flat space-time. The unitarity and gauge invariance of the S-matrix in a class of gauge conditions is preserved by massless ghost vector particles, called `Feynman-DeWitt-Mandelstam' (FDM) ghosts, in quantum Yang-Mills gravity. Using dimensional regularization, the graviton self-energy are explicitly calculated with a general gauge condition. The resultant divergence of graviton self-energy at the one-loop level resembles to that in quantum electrodynamics.

Jong-Ping Hsu; Sung Hoon Kim

2012-10-16T23:59:59.000Z

404

Field and modeling study of windblown particles from a uranium mill tailings pile  

SciTech Connect

An extensive field study whose primary objective was to obtain knowledge and understanding of the nature and quantity of windblown particles from uranium mill tailings piles was conducted in the Ambrosia Lake District of New Mexico. The following major field tasks were undertaken: determination of physical, chemical, and radioactivity characteristics of mill tailings particles; an investigation of the nature and quantity of tailings particles in soil in the vicinity of tailings piles; and the determination of the nature and flux of particles being transported by wind as a function of wind speed and height. Results of the field study are presented. Particle size distributions and associated radioactivity were measured.

Schwendiman, L.C.; Sehmel, G.A.; Horst, T.W.; Thomas, C.W.; Perkins, R.W.

1980-06-01T23:59:59.000Z

405

Pinch Analysis Process Energy Integration Study of Slocan Fibreco Pulp Mill  

Science Conference Proceedings (OSTI)

This report presents the results of a Pinch analysis study undertaken at the Slocan Fibreco Pulp mill. The study's objective is to draw a global strategic plan of action aiming at the cost minimization of the mill's thermal energy usage. This has been achieved with the help of a well-proven process energy integration technique called Pinch analysis, an approach that is particularly suitable to identify cost-effective solutions from a global perspective of the whole process. A 2-year maximum direc...

2005-02-04T23:59:59.000Z

406

Uranium Mill Tailings Remedial Action (UMTRA) Surface Project: Project plan. Revision 1  

Science Conference Proceedings (OSTI)

The Uranium Mill Tailings Radiation Control Act of 1978 (UMTRCA) [Public Law (PL) 95-604, 42 United States Code (USC) 7901], hereinafter referred to as the ``Act,`` authorizes the US Department of Energy (DOE) to stabilize and control surface tailings and ground water contamination. To fulfill this mission, the DOE has established two projects under the Uranium Mill Tailings Remedial Action (UMTRA) Project Office. The Ground Water Project was established in April 1991 as a major project and a separate project plan will be prepared for that portion of the mission. This project plan covers the UMTRA Surface Project, a major system acquisition (MSA).

Not Available

1993-08-11T23:59:59.000Z

407

Atmospheric emissions of one pulp and paper mill. contribution to the air quality of Viana do Castelo  

Science Conference Proceedings (OSTI)

One of the most sensitive environmental impact of the pulp and paper mills is associated with the atmospheric pollution namely with sulphur compounds, particulate matter and nitrogen oxides. The study undertaken aimed to evaluate the influence of one ... Keywords: air pollution modelling, kraft pulp and paper mill, urban air pollution

Lgia T. Silva; Jos F. G. Mendes

2009-10-01T23:59:59.000Z

408

A Low-Noise, Microprocessor-Controlled, Internally Digitizing Rotating-Vane Electric Field Mill for Airborne Platforms  

Science Conference Proceedings (OSTI)

This paper reports on a new generation of aircraft-based rotating-vane-style electric field mills designed and built at NASAs Marshall Space Flight Center. The mills have individual microprocessors that digitize the electric field signal at the ...

M. G. Bateman; M. F. Stewart; S. J. Podgorny; H. J. Christian; D. M. Mach; R. J. Blakeslee; J. C. Bailey; D. Daskar

2007-07-01T23:59:59.000Z

409

Tool fabrication system for micro/nano millingfunction analysis and design of a six-axis Wire EDM machine  

E-Print Network (OSTI)

fabrication system for micro/nano millingfunction analysisselected. Keywords Micro/nano milling . Wire EDM . FunctionJapan 1 Introduction Micro/nano machining is requisite by

Cheng, X.; Wang, Z. G.; Kobayashi, S.; Nakamoto, K.; Yamazaki, K.

2010-01-01T23:59:59.000Z

410

Progress Towards Optimizing the PETSc Numerical Toolkit on the Richard Tran Mills, Eduardo F. D'Azevedo, and Mark R. Fahey  

E-Print Network (OSTI)

Progress Towards Optimizing the PETSc Numerical Toolkit on the Cray X1 Richard Tran Mills, Eduardo-implicit code for multiphase groundwater (Darcy) flow and reactive transport coauthored by Richard Mills performance tests. About the authors Richard Tran Mills is a Computational Scientist at the Center

411

Hidden symmetries induced by a canonical transformation and gauge structure of compactified Yang-Mills theories  

E-Print Network (OSTI)

Compactified Yang-Mills theories with one universal extra dimension were found [arXiv:1008.4638] to exhibit two types of gauge invariances: the standard gauge transformations (SGTs) and the nonstandard gauge transformations (NSGTs). In the present work we show that these transformations are not exclusive to compactified scenarios. Introducing a notion of hidden symmetry, based on the fundamental concept of canonical transformation, we analyse three different gauge systems, each of which is mapped to a certain effective theory that is invariant under the so-called SGTs and NSGTs. The systems under discussion are: (i) four dimensional pure $SU(3)$ Yang-Mills theory, (ii) four dimensional $SU(3)$ Yang-Mills with spontaneous symmetry breaking, and (iii) pure Yang-Mills theory with one universal compact extra dimension. The canonical transformation, that induces the notion of hidden symmetry, maps objects with well defined transformation laws under a gauge group $G$ to well defined objects under a non-trivial subgroup $H \\subset G$. In the case where spontaneous symmetry breaking is present, the set of SGTs corresponds to the group into which the original gauge group is broken into, whereas the NSGTs are associated to the broken generators and can be used to define the unitary gauge. For the system (iii), the SGTs coincide with the gauge group $ SU(N,\\cal{M}^{4}) $, whereas the NSGTs do not form a group; in this system the 'fundamental' theory and the effective one are shown to be classically equivalent.

M. A. Lpez-Osorio; E. Martnez-Pascual; H. Novales-Snchez; J. J. Toscano

2013-02-13T23:59:59.000Z

412

A traceability system incorporating 2D barcode and RFID technology for wheat flour mills  

Science Conference Proceedings (OSTI)

Wheat flour undergoes several processing steps in its transformation from raw wheat in the mill, which differentiates wheat flour from other farm products. At each step, various wheat sources are combined into one batch of wheat flour. This study primarily ... Keywords: 2D barcode, RFID, Supply chain, Traceability, Wheat flour

Jian-Ping Qian; Xin-Ting Yang; Xiao-Ming Wu; Li Zhao; Bei-Lei Fan; Bin Xing

2012-11-01T23:59:59.000Z

413

Gravity as the square of Yang-Mills: implications for N=8 Supergravity  

E-Print Network (OSTI)

The pure gravity Lagrangian can be written as the "square" of the pure Yang-Mills Lagrangian to second order in coupling constants. This paper uses this form of the gravity Lagrangian as a starting point to arrive at a compact light-cone superspace Lagrangian for N=8 Supergravity to order $\\kappa$^2.

Sudarshan Ananth

2009-02-18T23:59:59.000Z

414

KEYNOTE SPEAKER: Gary Petersen, Director of Transportation, General Mills 8th Annual Freight and Logistics Symposium  

E-Print Network (OSTI)

the future of the freight industry--from trucking to rail, air, and marine transport--at the 8th Annual included the changing landscape of transportation, public- and private-sector views of the futureKEYNOTE SPEAKER: Gary Petersen, Director of Transportation, General Mills 8th Annual Freight

Minnesota, University of

415

Radiological survey of the inactive uranium-mill tailings at Ambrosia Lake, New Mexico  

Science Conference Proceedings (OSTI)

The inactive uranium-mill tailings pile at Ambrosia Lake, New Mexico, contains approximately 1520 Ci of /sup 226/Ra in 2.4 million metric tons of tailings covering an area of 43 hectares. All of the former mill buildings were intact and, at the time of this survey, several were in use. The tailings have not been stabilized, but the crusty surface is reported to be resistant to wind erosion. The average gamma-ray exposure rate 1 m above the tailings is 720 ..mu..R/h while the average rate in the former mill area is 150 ..mu..R/h. The adjacent area, between the mill site, ponds, and tailings pile, has an average exposure rate of 230 ..mu..R/h. Gamma radiation measurements outside these areas, as well as the results of analyses of surface or near-surface sediment and soil samples, show fairly wide dispersion of contamination around the site. The subsurface distribution of /sup 226/Ra in 18 holes drilled at the site, calculated from gamma-ray monitoring data, is presented graphically and compared with measured concentrations in two holes.

Haywood, F.F.; Christian, D.J.; Ellis, B.S.; Hubbard, H.M. Jr.; Lorenzo, D.; Shinpaugh, W.H.

1980-06-01T23:59:59.000Z

416

Environmental assessment of remedial action at the Slick Rock uranium mill tailings sites, Slick Rock, Colorado  

SciTech Connect

The Uranium Mill Tailings Radiation Control Act of 1978, hereafter referred to as the UMTRCA, authorized the US Department of Energy (DOE) to clean up two uranium mill tailings processing sites near Slick Rock, Colorado, in San Miguel County. The purpose of the cleanup is to reduce the potential health effects associated with the radioactive materials remaining on the processing sites and on vicinity properties (VPs) associated with the sites. The US Environmental Protection Agency (EPA) promulgated standards for the UMTRCA that contained measures to control the contaminated materials and to protect the ground water from further degradation. The sites contain concrete foundations of mill buildings, tailings piles, and areas contaminated by windblown and waterborne radioactive tailings materials. The proposed action is to remediate the UC and NC sites by removing all contaminated materials within the designated site boundaries or otherwise associated with the sites, and relocating them to, and stabilizing them at, a location approximately 5 road mi (8 km) northeast of the processing sites on land administered by the US Bureau of Land Management (BLM). Remediation would be performed by the DOE`s Uranium Mill Tailings Remedial Action (UMTRA) Project.

NONE

1995-01-01T23:59:59.000Z

417

Role of the inclusion survey contractor in the Uranium Mill Tailings Remedial Action Program  

Science Conference Proceedings (OSTI)

Twenty-four former uranium mills are involved in the Department of Energy's Uranium Mill Tailings Remedial Action Program (UMTRAP). The Radiological Survey Activities project at Oak Ridge National Laboratory serves as the Inclusion Survey Contractor (ISC) in the UMTRA program. Responsibilities of the ISC are: (1) to identify potentially contaminated sites in the vicinity of these former uranium mills; (2) conduct radiological surveys to assess whether the property is contaminated with material originating from the mill in excess of Environmental Protection Agency criteria formulated specifically for the UMTRA program (40 CFR 192); and (3) provide recommendations to DOE regarding remedial action. Properties are identified by the ISC using historical information, serial and ground-level gamma scanning, and surveying erosional pathways (wind and water movement of contamination from primary sources). Currently, over 8000 vicinity properties have been identified that warrant further investigation. Once identified, an inclusion survey is conducted to assess whether a property is sufficiently contaminated to warrant inclusion into the UMTRA program. The inclusion survey includes a complete gamma scan of the surfaces of the property outdoors and the lowest habitable level indoors, and collection of soil samples outdoors and/or radon daughter samples indoors if required. Survey methods are described. 8 references.

Berven, B.A.; Little, C.A.

1985-01-01T23:59:59.000Z

418

Programmatic Environmental Report for remedial actions at UMTRA (Uranium Mill Tailings Remedial Action) Project vicinity properties  

Science Conference Proceedings (OSTI)

This Environmental Report (ER) examines the environmental consequences of implementing a remedial action that would remove radioactive uranium mill tailings and associated contaminated materials from 394 vicinity properties near 14 inactive uranium processing sites included in the Uranium Mill Tailings Remedial Action (UMTRA) Project pursuant to Public Law 95--604, the Uranium Mill Tailings Radiation Control Act (UMTRCA) of 1978. Vicinity properties are those properties in the vicinity of the UMTRA Project inactive mill sites, either public or private, that are believed to be contaminated by residual radioactive material originating from one of the 14 inactive uranium processing sites, and which have been designated under Section 102(a)(1) of UMTRCA. The principal hazard associated with the contaminated properties results from the production of radon, a radioactive decay product of the radium contained in the tailings. Radon, a radioactive gas, can diffuse through the contaminated material and be released into the atmosphere where it and its radioactive decay products may be inhaled by humans. A second radiation exposure pathway results from the emission of gamma radiation from uranium decay products contained in the tailings. Gamma radiation emitted from contaminated material delivers an external exposure to the whole body. If the concentration of radon and its decay products is high enough and the exposure time long enough, or if the exposure to direct gamma radiation is long enough, cancers (i.e., excess health effects) may develop in persons living and working at the vicinity properties. 3 refs., 7 tabs.

Not Available

1985-03-01T23:59:59.000Z

419

Radiological survey of the inactive uranium-mill tailings at Green River, Utah  

SciTech Connect

The uranium-mill tailings at Green River, Utah, are relatively low in /sup 226/Ra content and concentration (20 Ci and 140 pCi/g, respectively) because the mill was used to upgrade the uranium ore by separating the sand and slime fractions; most of the radium was transported along with the slimes to another mill site. Spread of tailings was observed in all directions, but near-background gamma exposure rates were reached at distances of 40 to 90 m from the edge of the pile. Water erosion of the tailings is evident and, since a significant fraction of the tailings pile lies in Brown's Wash, the potential exists for repetition of the loss of a large quantity of tailings such as occurred during a flood in 1959. In general, the level of surface contamination was low at this site, but some areas in the mill site, which were being used for nonuranium work, have gamma-ray exposure rates up to 143 ..mu..R/hr.

Haywood, F.F.; Christian, D.J.; Ellis, B.S.; Hubbard, H.M. Jr.; Lorenzo, D.; Shinpaugh, W.H.

1980-03-01T23:59:59.000Z

420

Key programmatic steps and activities for implementing the Uranium Mill Tailings Remedial Action Project. [UMTRA Project  

SciTech Connect

The Uranium Mill Tailings Radiation Control Act of 1978 (UMTRCA) was enacted based upon findings by Congress that uranium mill tailings located at active and inactive hazard to the public, and that protection of the public health, safety and welfare, and the regulations of interstate commerce, require that every reasonable effort be made to provide for the stabilization, disposal, and control in a safe and environmentally sound manner of such tailings in order to prevent or minimize radon diffusion into the environment and to prevent or minimize other environmental hazards from such tailings.'' A general understanding of the steps leading to elimination of the hazards associated with designated uranium mill tailings sites, and the parties involved in that effort, are presented in this document. A representative schedule is also presented in this document to show both program sequence and activity interdependence. Those activities that have the most potential to influence program duration, because of the significant amount of additional time that may be required, include identification and selection of a suitable site, field data collection delays due to weather, actual acquisition of the designated or alternate disposal site, construction delays due to weather, and site licensing. This document provides an understanding of the steps, the sequence, the parties involved, and a representative duration of activities leading to remedial action and cleanup at the designated inactive uranium mill tailings sites. 10 refs., 5 figs., 1 tab.

Not Available

1985-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "jack wise mills" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

A Field and Modeling Study of Windblown Particles from a Uranium Mill Tailings Pile  

SciTech Connect

An extensive field study whose primary objective was to obtain knowledge and understanding of the nature and quantity of windblown particles from uranium mill tailings piles was conducted in the Ambrosia Lake District of New Mexico. The following major field tasks were undertaken: determination of physical, chemical, and radioactivity characteristics of mill tailings particles; an investigation of the nature and quantity of tailings particles in soil in the vicinity of tailings piles; and the determination of the nature and flux of particles being transported by wind as a function of wind speed and height. Results of the field study are presented. Particle size distributions and associated radioactivity were measured. Radioactivity relationships showed uranium daughters in mill tailings to be in essential radioactive equilibrium for the carbonate leach process but thorium-230 tends to be leached into the slurry water for the acid process mill tailings. One objective of the study was to relate windblown particle concentrations, fluxes, and particle sizes to wind speed. Hundreds of samples were taken and analyses were performed, but relationships between wind speed, airborne particle sizes and concentrations were found to be vague and inconclusive. A resuspension, deposition, and transport model was developed and applied using site meteorology. Ground deposition patterns predicted were similar to those found.

Schwendiman, L. C.; Sehmel, G. A.; Horst, T. W.; Thomas, C. W.; Perkins, R. W.

1980-06-01T23:59:59.000Z

422

Using alternative chemicals in the flotation of heavy metals from lead mill tailings  

Science Conference Proceedings (OSTI)

The U.S. Bureau of Mines (USBM) investigated alternative chemicals for the flotation of heavy metal values from southeast Missouri lead mill tailings. The objectives of the study were to lower the Pb remaining in the reprocessed tailings to canola oil, to be as effective as classic sulfide flotation reagents.

Benn, F.W. [Bureau of Mines, Rolla, MO (United States)

1995-04-01T23:59:59.000Z

423

Application of Airborne Field Mill Data for Use in Launch Support  

Science Conference Proceedings (OSTI)

An airborne field mill (ABFM) system was implemented on a Learjet 36A and was used to collect electric-field and microphysical data for summertime convective clouds new Cape Canaveral and the Kennedy Space Center. This system is described and the ...

Ray Harris-Hobbs; Kathy Giori; Michael Bellmore; Arleen Lunsford

1994-06-01T23:59:59.000Z

424

Prediction of the Effect of Heat Generation in Ballscrew on the Accuracy of CNC Milling Machine  

Science Conference Proceedings (OSTI)

In high speed machining, friction between the moving parts, generates heat. One of the major causes of thermal errors in linear axes is the heat generated in ball screw during operation at high speed. Thermal errors affect the accuracy of the linear ... Keywords: CNC Milling Machine, Ballscrew, Circular Deviations, Ballbar Test, Artificial neural network

Hojat Dehnavi; Mohammad Reza Movahhedy; Ahmad Naebi; Soleyman Pasban

2012-03-01T23:59:59.000Z

425

Selective ensemble modeling parameters of mill load based on shell vibration signal  

Science Conference Proceedings (OSTI)

Load parameters inside the ball mill have direct relationships with the optimal operation of grinding process. This paper aims to develop a selective ensemble modeling approach to estimate these parameters. At first, the original vibration signal is ... Keywords: empirical mode decomposition, selective ensemble modeling, soft sensor, vibration frequency spectrum

Jian Tang; Li-Jie Zhao; Jia Long; Tian-you Chai; Wen Yu

2012-07-01T23:59:59.000Z

426

First Arkansas Mill of its kind turns sawdust into stove pellets  

Science Conference Proceedings (OSTI)

This article describes a new mill in Arkansas that converts waste sawdust into pellets for use in a new kind of stove like the ones two Resource Conservation and Development Districts placed in 20 districts as a demonstration project. A review of the wood pellet industry and of this particular project is provided.

NONE

1994-12-31T23:59:59.000Z

427

Equivalence of Two Approaches to Yang-Mills on Non-commutative Torus  

E-Print Network (OSTI)

There are two notions of Yang-Mills action functional in noncommutative geometry. We show that for noncommutative n-torus both these notions agree. We also prove a structure theorem on the Hermitian structure of a finitely generated projective modules over spectrally invariant subalgebras of $C^*$-algebras.

Partha Sarathi Chakraborty; Satyajit Guin

2013-04-29T23:59:59.000Z

428

MIL-L-87177 and CLT:X-10 Lubricants Improve Electrical Connector Fretting Corrosion Behavior  

SciTech Connect

We have conducted a fretting research project using MIL-L-87177 and CLT: X-10 lubricants on Nano-miniature connectors. When they were fretted without lubricant, individual connectors first exceeded our 0.5 ohm failure criteria from 2,341 to 45,238 fretting cycles. With additional fretting, their contact resistance increased to more than 100,000 ohms. Unmodified MIL-L-87177 lubricant delayed the onset of first failure to between 430,000 and over 20,000,000 fretting cycles. MIL-L-87177 modified by addition of Teflon powder delayed first failure to beyond 5 million fretting cycles. Best results were obtained when Teflon was used and also when both the straight and modified lubricants were poured into and then out of the connector. CLT: X-10 lubricant delayed the onset of first failure to beyond 55 million cycles in one test where a failure was actually observed and to beyond 20 million cycles in another that was terminated without failure. CLT: X-10 recovered an unlubricated connector driven deeply into failure, with six failed pins recovering immediately and four more recovering during an additional 420 thousand fretting cycles. MIL-L-87177 was not able to recover a connector under similar conditions.

AUKLAND,NEIL R.; HANLON,JAMES T.

1999-10-12T23:59:59.000Z

429

GridWise Architecture Council  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Demand Response (DR) Functionality Action Plan for Rapid Penetration of Home Energy Management (HEM) Technologies Rob Pratt Program Manager, Smart Grid R&D Tel: 509-375-3648 Fax:...

430

Mass gap in quantum energy-mass spectrum of relativistic Yang-Mills fields  

E-Print Network (OSTI)

A non-perturbative relativistic quantum Yang-Mills theory with a semisimple compact gauge Lie group on the four-dimensional Minkowski spacetime is set up in a Schroedinger representation with infinite-dimensional differential operators in the framework of sesqui-holomorphic nuclear Kree-Gelfand triples. The \\emph{linear} quantum Yang-Mills energy-mass operator $\\mathbf{H}$ is defined as the anti-normal quantization of the \\emph{non-linear} Yang-Mills energy-mass functional of Cauchy data supported by a ball $\\mathbb{B}(R)$ with the center at the origin of $\\mathbb{R}^3$ and the variable radius R>0. The general global solution of the non-linear Yang-Mills system of partial differential equations (with no restrictions at infinity) is reduced to the solution of the initial value problems in the temporal gauge with the Cauchy data supported by the balls $\\mathbb{B}(R)$. It is shown that $\\mathbf{H}$ dominates the number operator $\\mathbf{N}$. Since 0 is the spectral infimum of $\\mathbf{H}$ and, simultaneously, the simple fundamental eigenvalue of $N$, variational spectral principles imply that 0 is the simple fundamental eigenvalue of $N$ as well. Thus $\\mathbf{H}$ has a positive mass gap. The domination proof depends crucially on the magic of the Killing quadratic form that reveals a mass quadratic form in the Weyl symbol of $\\mathbf{H}$. With a dimensional transmutation of the coupling constant, the mass gap is proportional to 1/R and the running coupling constant is proportional to $\\sqrt{R}$. The inverse dependence demonstrates an asymptotic freedom for quantum Yang-Mills self-interaction at short distances. The mathematically rigorous theory is non-perturbative and provides a solution for the 7th Clay Institute Millennium problem.

Alexander Dynin

2013-08-29T23:59:59.000Z

431

Using Decline Map Anlaysis (DMA) to Test Well Completion Influence on Gas Production Decline Curves in Barnett Shale (Denton, Wise, and Tarrant Counties)  

E-Print Network (OSTI)

The increasing interest and focus on unconventional reservoirs is a result of the industry's direction toward exploring alternative energy sources. It is due to the fact that conventional reservoirs are being depleted at a fast pace. Shale gas reservoirs are a very favorable type of energy sources due to their low cost and long-lasting gas supply. In general, according to Ausubel (1996), natural gas serves as a transition stage to move from the current oil-based energy sources to future more stable and environment-friendly ones. By looking through production history in the U.S Historical Production Database, HPDI (2009), we learn that the Barnett Shale reservoir in Newark East Field has been producing since the early 90's and contributing a fraction of the U.S daily gas production. Zhao et al. (2007) estimated the Barnett Shale to be producing 1.97 Bcf/day of gas in 2007. It is considered the most productive unconventional gas shale reservoir in Texas. By 2004 and in terms of annual gas production volume, Pollastro (2007) considered the Barnett Shale as the second largest unconventional gas reservoir in the United States. Many studies have been conducted to understand better the production controls in Barnett Shale. However, this giant shale gas reservoir is still ambiguous. Some parts of this puzzle are still missing. It is not fully clear what makes the Barnett well produce high or low amounts of gas. Barnett operating companies are still trying to answer these questions. This study adds to the Barnett chain of studies. It tests the effects of the following on Barnett gas production in the core area (Denton, Wise, and Tarrant counties): * Barnett gross thickness, including the Forestburg formation that divides Barnett Shale. * Perforation footage. * Perforated zones of Barnett Shale. Instead of testing these parameters on each well production decline curve individually, this study uses a new technique to simplify this process. Decline Map Analysis (DMA) is introduced to measure the effects of these parameters on all production decline curves at the same time. Through this study, Barnett gross thickness and perforation footage are found not to have any definite effects on Barnett gas production. However, zone 3 (Top of Lower Barnett) and zone 1 (Bottom of Lower Barnett) are found to contribute to cumulative production. Zone 2 (Middle of Lower Barnett) and zone 4 (Upper Barnett), on the other hand, did not show any correlation or influence on production through their thicknesses.

Alkassim, Ibrahim

2009-08-01T23:59:59.000Z

432

A Confining Non-Local Four-Fermi Interaction from Yang-Mills Theory in a Stochastic Background  

E-Print Network (OSTI)

We derive a non-local four-fermi term with a linear potential from Yang-Mills Theory in a stochastic background. The stochastic background is a class of classical configuration derived from the non-linear gauge.

Jose A. Magpantay

2004-12-10T23:59:59.000Z

433

Investigation of aspect ratio of hole drilling from micro to nanoscale via focused ion beam fine milling  

E-Print Network (OSTI)

Holes with different sizes from microscale to nanoscale were directly fabricated by focused ion beam (FIB) milling in this paper. Maximum aspect ratio of the fabricated holes can be 5:1 for the hole with large size with ...

Fu, Yongqi

434

Real Time Simulation and Visualization of NC Milling Processes for Inhomogeneous Materials on Low-End Graphics Hardware  

E-Print Network (OSTI)

Simulation and visualization of NC milling processes has become an important step in computer aided manufacturing. The usage of stock materials with specific locally varying properties (like density, accuracy, color,. . . ) becomes more and more important with new technologies emerging in the material industry. Our new approach, using volumetric representation, has been adapted to this needs and copes with inhomogeneous material properties. Taking color as one possible material property, our approach enables the visualization of milled wood or compound materials. Furthermore, our approach has been developed with the usage of low-end graphics hardware in mind. The algorithms have been optimized to ensure interactive update rates even on standard personal computers without hardware graphics acceleration. Keywords: NC milling simulation, dexel approach, inhomogeneous material properties 1. Introduction NC milling simulation using computer graphics techniques was proposed some years ag...

Andreas Holger Knig; Eduard Grller

1998-01-01T23:59:59.000Z

435

Hardness variation and cyclic crystalline-amorphous phase transformation in CuZr alloy during ball milling  

E-Print Network (OSTI)

The hardness and percent crystallinity of Cu33Zr67 powder samples are measured through several cycles of a cyclic phase transformation during ball milling. Each are found to cycle with a period of approximately 320 minutes. ...

Schoen, David Taylor

2005-01-01T23:59:59.000Z

436

Mechanical design of a desktop milling machine for fabrication in an introductory machining class by Johannes Schneider.  

E-Print Network (OSTI)

The purpose of this research is the mechanical design of a miniature desktop milling machine for use as an alternative class project in MIT's introductory machining course 2.670. This research is important, because a ...

Schneider, Johannes (Johannes A.)

2010-01-01T23:59:59.000Z

437

Structural analysis of arabinoxylans isolated from ball-milled switchgrass biomass  

NLE Websites -- All DOE Office Websites (Extended Search)

analysis analysis of arabinoxylans isolated from ball-milled switchgrass biomass Koushik Mazumder, William S. York * Complex Carbohydrate Research Center, University of Georgia, 315 Riverbend Road, Athens, GA 30602, USA a r t i c l e i n f o Article history: Received 16 June 2010 Received in revised form 20 July 2010 Accepted 22 July 2010 Available online 30 July 2010 Keywords: Switchgrass Enzymatic digestion Arabinoxylan oligosaccharides Per-O-methylation Multiple-step mass spectrometry Structural analysis a b s t r a c t Ball-milled alcohol-insoluble residue (AIR) was prepared from switchgrass (Panicum virgatum var Alamo) and sequentially extracted with 50 mM ammonium oxalate buffer, 50 mM sodium carbonate, 1 M KOH containing 1% NaBH 4 , and 4 M KOH containing 1% NaBH 4 . Arabinoxylan was the most abundant component of the 1 M KOH-extracted fraction, which was treated with endoxylanase

438

Moab Mill Tailings Removal Project Plans to Resume Train Shipments in  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Plans to Resume Train Shipments Plans to Resume Train Shipments in March; All of the Laid Off Workers Will Return Moab Mill Tailings Removal Project Plans to Resume Train Shipments in March; All of the Laid Off Workers Will Return February 25, 2013 - 12:00pm Addthis Media Contacts Donald Metzler, donald.metzler@gjem.doe.gov 970-257-2115 Jeff Biagini, jeff.biagini@gjemrac.doe.gov 970-257-2117 Wendee Ryan, wryan@gjemtac.doe.gov 970-257-2145 Grand Junction, CO - All 27 employees of the Remedial Action Contractor (RAC) to the U.S. Department of Energy will return to work on the Uranium Mill Tailings Remedial Action Project on March 4, following a 3-month planned furlough. Project shipping and disposal operations have been shut down, as planned, since late November 2012, but are scheduled to resume

439

Energy Efficiency Improvements and Cost Saving Opportunities in the Corn Wet Milling Industry  

E-Print Network (OSTI)

Corn wet milling is the most energy intensive industry in the food and kindred products group (SIC 20). Plants typically spend approximately $15 to 25 million per year on energy, one of its largest operating costs, making energy efficiency improvement an important way to reduce costs and increase predictable earnings, especially in times of high energy-price volatility. After describing the industry's trends, structure and production and the process's energy use, we examine energy-efficiency opportunities for corn wet millers. Where available, we provide energy savings and typical payback periods for each measure based on case studies of plants that have implemented it. Given available resources and technology, there are opportunities to reduce energy consumption cost-effectively in the industry while maintaining the quality of the products produced. Further research on the economics of the measures and their applicability to different wet milling practices is needed to assess implementation of selected technologies at individual plants.

Galitsky, C.; Worrell, E.

2003-05-01T23:59:59.000Z

440

Radiological survey of the inactive uranium-mill tailings at the Spook site, Converse County, Wyoming  

SciTech Connect

Results of a radiological survey performed at the Spook site in Converse County, Wyoming, in June 1976, are presented. The mill at this site was located a short distance from the open-pit mine where the ore was obtained and where part of the tailings was dumped into the mine. Several piles of overburden or low-grade ore in the vicinity were included in the measurements of above-ground gamma exposure rate. The average exposure rate over these piles varied from 14 ..mu..R/hr, the average background exposure rate for the area, to 140 ..mu..R/hr. The average exposure rate for the tailings and former mill area was 220 ..mu..R/hr. Movement of tailings particles down dry washes was evident. The calculated concentration of /sup 226/Ra in ten holes as a function of depth is presented graphically.

Haywood, F.F.; Christian, D.J.; Chou, K.D.; Ellis, B.S.; Lorenzo, D.; Shinpaugh, W.H.

1980-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "jack wise mills" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

An aerial radiological survey of the Durango, Colorado uranium mill tailings site and surrounding area  

SciTech Connect

An aerial radiological survey of Durango, Colorado, including the inactive uranium mill tailings piles located southwest of the town, was conducted during August 25--29, 1980, for the Department of Energy's Environmental and Safety Engineering Division. Areas of radiation exposure rates higher than the local background, which was about 15 microrentgens per hour ({mu}R/h), were observed directly over and to the south of the mill tailings piles, over a cemetery, and at two spots near the fairgrounds. The rapidly changing radiation exposure rates at the boundaries of the piles preclude accurate extrapolation of aerial radiological data to ground level exposure rates in their immediate vicinity. Estimated radiation exposure rates close to the piles, however, approached 30 times background, or about 450 {mu}R/h. Radiation exposure rates in a long area extending south from the tailings piles were about 25 {mu}R/h.

Hilton, L.K.

1981-06-01T23:59:59.000Z

442

Estimated dose to man from uranium milling via the terrestrial food-chain pathway  

SciTech Connect

One of the major pathways of radiological exposure to man from uranium milling operations is through the terrestrial food chain. Studies by various investigators have shown the extent of uptake and distribution of U-238, U-234, Th-230, Ra-226, Pb-210, and Po-210 in plants and animals. These long-lived natural radioisotopes, all nuclides of the uranium decay series, are found in concentrated amounts in uranium mill tailings. Data from these investigations are used to estimate the dose to man from consumption of beef and milk contaminated by the tailings. This dose estimate from this technologically enhanced source is compared with that from average normal dietary intake of these radionuclides from natural sources.

Rayno, D.R.

1982-01-01T23:59:59.000Z

443

Protect and Restore Mill Creek Watershed; Annual Report 2002-2003.  

DOE Green Energy (OSTI)

The Nez Perce Tribe Department of Fisheries Resource Management, Watershed Division approaches watershed restoration with a ridge-top to ridge-top approach. Watershed restoration projects within the Mill Creek watershed are coordinated with the Nez Perce National Forest. The Nez Perce Tribe began watershed restoration projects within the Mill Creek watershed of the South Fork Clearwater River in 2000. Progress has been made in restoring the watershed through excluding cattle from critical riparian areas through fencing. During the FY 2002, trees were planted in riparian areas in the meadow of the upper watershed. In addition, a complete inventory of culverts at road-stream crossings was completed. Culverts have been prioritized for replacement to accommodate fish passage throughout the watershed. Maintenance to the previously built fence was also completed.

McRoberts, Heidi (Nez Perce Tribe, Department of Fisheries Resource Management, Lapwai, ID)

2004-01-01T23:59:59.000Z

444

Remedial Action Plan and site design for stabilization of the inactive uranium mill tailings site at Falls City, Texas. [Uranium Mill Tailings Remedial Action (UMTRA) Project  

Science Conference Proceedings (OSTI)

The uranium processing site near Falls City, Texas, was one of 24 inactive uranium mill sites designated to be remediated by the US Department of Energy (DOE) under Title I of the Uranium Mill Tailings Radiation Control Act of 1978 (UMTRCA). The UMTRCA requires that the US Nuclear Regulatory Commission (NRC) concur with the DOE's remedial action plan (RAP) and certify that the remedial action conducted at the site complies with the standards promulgated by the US Environmental Protection Agency (EPA). The RAP, which includes this summary remedial action selection report (RAS), serves a two-fold purpose. First, it describes the activities proposed by the DOE to accomplish long-term stabilization and control of the residual radioactive materials at the inactive uranium processing site near Falls City, Texas. Second, this document and the remainder of the RAP, upon concurrence and execution by the DOE, the State of Texas, and the NRC, becomes Appendix B of the Cooperative Agreement between the DOE and the State of Texas.

Chernoff, A.R. (USDOE Albuquerque Field Office, NM (United States). Uranium Mill Tailings Remedial Action Project Office); Lacker, D.K. (Texas State Dept. of Health, Austin, TX (United States). Bureau of Radiation Control)

1992-09-01T23:59:59.000Z

445

Remedial action plan and site design for stabilization of the inactive uranium mill tailings sites at Rifle, Colorado  

SciTech Connect

This appendix assesses the present conditions and data gathered about the two inactive uranium mill tailings sites near Rifle, Colorado, and the designated disposal site six miles north of Rifle in the area of Estes Gulch. It consolidates available engineering, radiological, geotechnical, hydrological, meteorological, and other information pertinent to the design of the Remedial Action Plan (RAP). The data characterize conditions at the mill, tailings, and disposal site so that the Remedial Action Contractor (RAC) may complete final designs for the remedial actions.

Not Available

1992-02-01T23:59:59.000Z

446

Baeklund transformations, conservation laws and linearization of the self-dual Yang-Mills and chiral fields  

SciTech Connect

Baecklund Transformations (BT) and the derivation of local conservation laws are first reviewed in the classic case of the Sine-Gordon equation. The BT, conservation laws (local and nonlocal), and the inverse-scattering formulation are discussed for the chiral and the self-dual Yang-Mills fields. Their possible applications to the loop formulation for the Yang-Mills fields are mentioned. 55 references, 1 figure.

Wang, L.C.

1980-01-01T23:59:59.000Z

447

Nonequilibrium roughening of interfaces in crystals under shear: application to ball milling  

SciTech Connect

A simple kinetic atomistic model is proposed for describing crystals submitted to sustained shearing, acting in competition with thermally activated diffusion. Monte Carlo simulations are performed on alloys with positive heats of mixing. The results provide a clear understanding of recent experiments showing that chemical mixing of immiscible elements can be induced by ball milling. At moderate shearing rates, an analytical model shows that such driven systems exhibit nonequilibrium roughening.

Bellon, P.; Averback, R.S. (Department of Materials Science and Engineering, 1304 W. Green Street, Urbana, Illinois 61801 (United States))

1995-03-06T23:59:59.000Z

448

The Polarization Tensor of the Massless Mode in Yang-Mills Thermodynamics  

Science Conference Proceedings (OSTI)

We discuss the constraints on energy-momentum transfers in local vertices in the effective theory for the deconfining phase of SU(2) Yang-Mills thermodynamics. Subsequently, we apply these constraints to the computation of the polarization tensor of the massless mode on the one-loop level. The resulting gap equation for the sought-after screening function is solved numerically. We discuss and interpret our results.

Schwarz, Markus [Salierstr. 10, 76137 Karlruhe (Germany)

2011-09-22T23:59:59.000Z

449

Milling induces disorder in crystalline griseofulvin and order in its amorphous counterpart  

Science Conference Proceedings (OSTI)

This study investigates two apparently similar thermal signatures, shaped as bimodal exotherms, observed when either the crystalline or the amorphous from of the drug are subjected to milling. Crystalline griseofulvin was cryomilled and the (quenched-melt) amorphous form was subjected to either cryomilling or grinding. The thermal and surface properties of the resulting samples were analyzed using differential scanning calorimetry (DSC) and surface energy analysis. After milling, both the crystalline and the amorphous material revealed visually similar bimodal exothermic events when the heating rate was 20 C min{sup -1}. Under different heating rates, the pair of DSC peaks for the bimodal exotherm of each material behaved entirely different from each other. The two peaks of the bimodal event, as well as the glass transition, can be kinetically resolved for the ground amorphous form using standard mode DSC. In contrast, similar analysis was unable to resolve the bimodal exotherm or a glass transition in the case of the cryomilled crystals. Furthermore, cryomilled crystals do not exhibit a glass transition even when analyzed using modulated DSC. Synchrotron sourced X-ray analysis revealed that grinding the amorphous material results in the nucleation and growth of the crystalline form. Milling thus induces disorder in the crystals of griseofulvin but induces order in the amorphous form of the drug. The surface of the two milled systems consistently exhibited different energetics under a wide range of relative humidity conditions. These findings suggest that cryomilling induces both bulk and surface disorder, specifically, a certain level of dislocations on the crystal. In contrast, grinding the amorphous material lowers the activation energy for crystal formation, inducing nuclei formation and growth throughout the amorphous matrix.

Otte, Andrew; Zhang, Yan; Carvajal, M. Teresa; Pinal, Rodolfo (Purdue)

2012-04-02T23:59:59.000Z

450

Noncommutative N=1 super Yang-Mills, the Seiberg-Witten map and UV divergences  

E-Print Network (OSTI)

Classically, the dual under the Seiberg-Witten map of noncommutative U(N), {\\cal N}=1 super Yang-Mills theory is a field theory with ordinary gauge symmetry whose fields carry, however, a \\theta-deformed nonlinear realisation of the {\\cal N}=1 supersymmetry algebra in four dimensions. For the latter theory we work out at one-loop and first order in the noncommutative parameter matrix \\theta^{\\mu\

C. P. Martin; C. Tamarit

2009-07-14T23:59:59.000Z

451

Guidance for Comanagement of Mill Rejects at Coal-Fired Power Plants  

Science Conference Proceedings (OSTI)

Traditionally, utilities have comanaged some or all of their low-volume wastes with their high-volume combustion by-products in disposal facilities. This report presents guidance on comanagement of coal combustion by-products and mill rejects containing pyrites at coal-fired power plants. The report specifically addresses the issue of environmental protection from leachates due to oxidation of pyrites under certain conditions. Included is a discussion of acid-base accounting and neutralization capacity o...

1999-06-22T23:59:59.000Z

452

String scattering in flat space and a scaling limit of Yang-Mills correlators  

Science Conference Proceedings (OSTI)

We use the flat space limit of the AdS/CFT correspondence to derive a simple relation between the 2{yields}2 scattering amplitude of massless string states in type IIB superstring theory on ten-dimensional Minkowski space and a scaling limit of the N=4 super Yang-Mills four-point functions. We conjecture that this relation holds nonperturbatively and at arbitrarily high energy.

Okuda, Takuya [Perimeter Institute for Theoretical Physics, Waterloo, Ontario, N2L 2Y5 (Canada); Penedones, Joao [Kavli Institute for Theoretical Physics, Santa Barbara, California 93106-4030 (United States)

2011-04-15T23:59:59.000Z

453

Particle motion in a Yang-Mills field Wong's equations and spin one-half analogues  

E-Print Network (OSTI)

A complete, straightforward and natural Lagrangian description is given for the classical non-relativistic dynamics of a particle with colour or internal symmetry degrees of freedom moving in a background Yang-Mills field. This provides a new simple Lagrangian formalism for Wong's equations for spinless particles, and presents also their generalisation, in gauge covariant form, for spin-\\frack particles, within a complete Lagrangian formalism.

Van Holten, J W

1995-01-01T23:59:59.000Z

454

Particle Motion in a Yang-Mills Field: Wong's Equations and Spin One-half Analogues  

E-Print Network (OSTI)

A complete, straightforward and natural Lagrangian description is given for the classical non-relativistic dynamics of a particle with colour or internal symmetry degrees of freedom moving in a background Yang-Mills field. This provides a new simple Lagrangian formalism for Wong's equations for spinless particles, and presents also their generalisation, in gauge covariant form, for spin-$\\frack$ particles, within a complete Lagrangian formalism.

N Linden A J Macfarlane; J W van Holten

1995-12-11T23:59:59.000Z

455

Effects Of Milling On Surface Integrity Of Low-Carbon Steel  

Science Conference Proceedings (OSTI)

This work measured the effect of milling parameters on the surface integrity of low-carbon alloy steel. The Variance Analysis showed that only depth of cut did not influence on the workpiece roughness and the Pearson's Coefficient indicated that cutting speed was more influent than tool feed. All cutting parameters introduced tensile residual stress in workpiece surface. The chip formation mechanism depended specially on cutting speed and influenced on the roughness and residual stress of workpiece.

Rodrigues, Alessandro Roger; Matsumoto, Hidekasu; Yamakami, Wyser Jose; Tokimatsu, Ruis Camargo; Menezes, Miguel Angelo; Suyama, Daniel Iwao; Norcino, Adriana Bruno; Vendrame, Saimon [UNESP-Univ Estatual Paulista, Engineering Faculty of Ilha Solteira, Av. Brasil Centro, 56-Zip Code 15.385-000-Ilha Solteira, Sao Paulo (Brazil)

2011-01-17T23:59:59.000Z

456

1992 Trieste Lectures on Topological Gauge Theory and Yang-Mills Theory  

E-Print Network (OSTI)

In these lecture notes we explain a connection between Yang-Mills theory on arbitrary Riemann surfaces and two types of topological field theory, the so called $BF$ and cohomological theories. The quantum Yang-Mills theory is solved exactly using path integral techniques. Explicit expressions, in terms of group representation theory, are obtained for the partition function and various correlation functions. In a particular limit the Yang-Mills theory devolves to the topological models and the previously determined correlation functions give topological information about the moduli spaces of flat connections. In particular, the partition function yields the volume of the moduli space for which an explicit expression is derived. These notes are self contained, with a basic introduction to the various ideas underlying the topological field theories. This includes some relatively new work on handling problems that arise in the presence of reducible connections which in turn forms the bridge between the various models under consideration. These notes are identical to those made available to participants of the 1992 summer school in Trieste, except for one or two additions added circa January 1993.

George Thompson

1993-05-24T23:59:59.000Z

457

Environmental assessment of remedial action at the Gunnison Uranium Mill Tailings Site, Gunnison, Colorado. [UMTRA Project  

SciTech Connect

This document assesses and compares the environmental impacts of various alternatives for remedial action at the Gunnison uranium of mill tailings site located 0.5 miles south of Gunnison, Colorado. The site covers 56 acres and contains 35 acres of tailings, 2 of the original mill buildings and a water tower. The Uranium Mill Tailings Radiation Control of Act of 1978 (UMTRCA), Public Law 95-604, authorizes the US Department of Energy to clean up the site to reduce the potential health impacts associated with the residual radioactive materials remaining at the site and at associated (vicinity) properties off the site. The US Environmental Protection Agency promulgated standards for the remedial actions (40 CFR 192). Remedial actions must be performed in accordance with these standards and with the occurrence of the Nuclear Regulatory Commission. Four alternatives have been addressed in this document. The first alternative is to consolidate the tailings and associated contaminated soils into a recontoured pile on the southern portion of the existing site. A radon barrier of silty clay would be constructed over the pile and various erosion control measures would be taken to assure the long-term integrity of the pile. Two other alternatives which involve moving the tailings to new locations are assessed in this document. These alternatives generally involve greater short-term impacts and are more costly but would result in the tailings being stabilized in a location farther from the city of Gunnison. The no action alternative is also assessed.

Bachrach, A.; Hoopes, J.; Morycz, D. (Jacobs Engineering Group, Inc., Pasadena, CA (USA)); Bone, M.; Cox, S.; Jones, D.; Lechel, D.; Meyer, C.; Nelson, M.; Peel, R.; Portillo, R.; Rogers, L.; Taber, B.; Zelle, P. (Weston (Roy F.), Inc., Washington, DC (USA)); Rice, G. (Sergent, Hauskins and Beckwith (USA))

1984-12-01T23:59:59.000Z

458

Radiological survey of the inactive uranium-mill tailings at Ray Point, Texas  

SciTech Connect

The mill site and tailings pile near Ray Point, Texas, cover an area of approximately 140 hectares located 1.6 km west of Ray Point. The dry portion of the tailings pile is stabilized, and the whole pile is surrounded by a dike. It contains approximately 445,000 metric tons of material with an estimated average /sup 226/Ra concentration of 518 pCi/g. The average gamma-ray exposure rate 1 m above the pile is 300 ..mu..R/hr while the corresponding average for the mill site, including the former ore storage area, is 87 ..mu..R/hr. Soil and sediment sample analyses, as well as gamma-ray exposure rate measurements, show some spread of contamination off the site; however, it appears that control measures at this site have been effective in limiting the spread of tailings. Access to the area is limited by chain-link and barbed-wire fences, and continued surveillance of the area is maintained. The mill buildings have been maintained for possible future use.

Haywood, F.F.; Christian, D.J.; Ellis, B.S.; Loy, E.T.; Lorenzo, D.

1980-11-01T23:59:59.000Z

459

Radiological survey of the inactive uranium-mill tailings at Slick Rock, Colorado  

SciTech Connect

Results of a radiological survey of two inactive mill sites near Slick Rock, Colorado, in April 1976 are presented. One mill, referred to in this report as North Continent (NC), was operated primarily for recovery of radium and vanadium and, only briefly, uranium. The Union Carbide Corporation (UCC) mill produced a uranium concentrate for processing elsewhere and, although low-level contamination with /sup 226/Ra was widespread at this site, the concentration of this nuclide in tailings was much lower than at the NC site. The latter site also has an area with a high above-ground gamma dose rate (2700 ..mu..R/hr) and a high-surface /sup 226/Ra concentration (5800 pCi/g). This area, which is believed to have been a liquid disposal location during plant operations, is contained within a fence. A solid disposal area outside the present fence contains miscellaneous contaminated debris. The estimated concentration of /sup 226/Ra as a function of depth, based on gamma hole-logging data, is presented for 27 holes drilled at the two sites.

Haywood, F.F.; Perdue, P.T.; Chou, K.D.; Ellis, B.S.

1980-06-01T23:59:59.000Z

460

Engineering assessment of inactive uranium mill tailings: Monument Valley Site, Monument Valley, Arizona  

Science Conference Proceedings (OSTI)

Ford, Bacon and Davis Utah Inc. has reevalated the Monument Valley site in order to revise the March 1977 engineering assessment of the problems resulting from the existence of radioactive uranium mill tailings at Monument Valley, Arizona. This engineering assessment has included the preparation of topographic maps, the performance of core drillings and radiometric measurements sufficient to determine areas and volumes of tailings and radiation exposure of individuals and nearby populations, the investigations of site hydrology and meteorology, and the evaluation and costing of alternative corrective actions. Radon gas released from the 1.1 million tons of tailings at the Monument Valley site constitutes the most significant environmental impact, although windblown tailings and external gamma radiation also are factors. The four alternative actions presented in this engineering assessment range from millsite decontamination with the addition of 3 m of stabilization cover material (Option I), to removal of the tailings to remote disposal sites and decontamination of the tailings site (Options II through IV). Cost estimates for the four options range from about $6,600,000 for stabilization in-place, to about $15,900,000 for disposal at a distance of about 15 mi. Three principal alternatives for reprocessing the Monument Valley tailings were examined: heap leaching; Treatment at an existing mill; and reprocessing at a new conventional mill constructed for tailings reprocessing. The cost of the uranium recovery is economically unattractive.

Not Available

1981-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "jack wise mills" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Annual status report on the Uranium Mill Tailings Remedial Action Program  

SciTech Connect

This eleventh annual status report summarizes activities of the Uranium Mill Tailings Remedial Action (UMTRA) Project undertaken during Fiscal Year (FY) 1989 by the US Department of Energy (DOE) and other agencies. Project goals for FY 1990 are also presented. An annual report of this type was a statutory requirement through January 1, 1986, pursuant to the Uranium Mill Tailings Radiation Control Act (UMTRCA) of 1978, Public Law (PL) 95--604. The DOE will continue to submit an annual report through project completion in order to inform the public of yearly project status. Title I of the UMTRCA authorizes the DOE, in cooperation with affected states and Indian tribes within whose boundaries designated uranium processing sites are located, to provide a program of assessment and remedial action at such sites. The purpose of the remedial action is to stabilize and control the tailings and other residual radioactive materials located on the inactive uranium processing sites in a safe and environmentally sound manner and to minimize or eliminate potential radiation health hazards. Commercial and residential properties in the vicinity of designated processing sites that are contaminated with material from the sites, herein referred to as vicinity properties,'' are also eligible for remedial action. Included in the UMTRA Project are 24 inactive uranium processing sites and associated vicinity properties located in 10 states, and the vicinity properties associated with Edgemont, South Dakota, an inactive uranium mill currently owned by the Tennessee Valley Authority (TVA).

Not Available

1989-12-01T23:59:59.000Z

462

Capture and Sequestration of CO2 at the Boise White Paper Mill  

SciTech Connect

This report documents the efforts taken to develop a preliminary design for the first commercial-scale CO2 capture and sequestration (CCS) project associated with biomass power integrated into a pulp and paper operation. The Boise Wallula paper mill is located near the township of Wallula in Southeastern Washington State. Infrastructure at the paper mill will be upgraded such that current steam needs and a significant portion of the current mill electric power are supplied from a 100% biomass power source. A new biomass power system will be constructed with an integrated amine-based CO2 capture plant to capture approximately 550,000 tons of CO2 per year for geologic sequestration. A customized version of Fluor Corporations Econamine Plus carbon capture technology will be designed to accommodate the specific chemical composition of exhaust gases from the biomass boiler. Due to the use of biomass for fuel, employing CCS technology represents a unique opportunity to generate a net negative carbon emissions footprint, which on an equivalent emissions reduction basis is 1.8X greater than from equivalent fossil fuel sources (SPATH and MANN, 2004). Furthermore, the proposed project will offset a significant amount of current natural gas use at the mill, equating to an additional 200,000 tons of avoided CO2 emissions. Hence, the total net emissions avoided through this project equates to 1,100,000 tons of CO2 per year. Successful execution of this project will provide a clear path forward for similar kinds of emissions reduction that can be replicated at other energy-intensive industrial facilities where the geology is suitable for sequestration. This project also represents a first opportunity for commercial development of geologic storage of CO2 in deep flood basalt formations. The Boise paper mill site is host to a Phase II pilot study being carried out under DOEs Regional Carbon Partnership Program. Lessons learned from this pilot study and other separately funded projects studying CO2 sequestration in basalts will be heavily leveraged in developing a suitable site characterization program and system design for permanent sequestration of captured CO2. The areal extent, very large thickness, high permeability in portions of the flows, and presence of multiple very low permeability flow interior seals combine to produce a robust sequestration target. Moreover, basalt formations are quite reactive with water-rich supercritical CO2 and formation water that contains dissolved CO2 to generate carbonate minerals, providing for long-term assurance of permanent sequestration. Sub-basalt sediments also exist at the site providing alternative or supplemental storage capacity.

B.P. McGrail; C.J. Freeman; G.H. Beeman; E.C. Sullivan; S.K. Wurstner; C.F. Brown; R.D. Garber; D. Tobin E.J. Steffensen; S. Reddy; J.P. Gilmartin

2010-06-16T23:59:59.000Z

463

TOP500 Supercomputer Sites Jack J. Dongarra  

E-Print Network (OSTI)

. Statistical lists of supercomputers are not new. Every year since 1986 Hans Meuer [1] has published system Research 20 38195 . SX­4/20 Japan /1996 40000 . 43 NEC Toyota Central Research Development Industry 20 33000 12032 108 TMC US Naval Research Laboratory Research 256 15100 26112 CM­5/256 Washington D.C. USA

Dongarra, Jack

464

TOP500 Supercomputer Sites Jack J. Dongarra  

E-Print Network (OSTI)

. Statistical lists of supercomputers are not new. Every year since 1986 Hans Meuer 1 has published system 38195 . SX-4 20 Japan 1996 40000 . 43 NEC Toyota Central Research Development Industry 20 38195 . SX-4 1993 33000 12032 108 TMC US Naval Research Laboratory Research 256 15100 26112 CM-5 256 Washington D

Dongarra, Jack

465

Lawrence Co. Scioto Co. Greenup Co. Jack  

U.S. Energy Information Administration (EIA) Indexed Site

COWEN COWEN BELLS F OR D FREDVILLE BIG CH IMNEY ALVIN N RPD-LAWRENC E-2 PEYTONA-EMMON S TOM PR ICE SCHOOL NE BREEDEN MAR E CREEK SCHOOL FAR LEY C HUR CH W LON G R UN LICKBURG RPD-GALLIA-1 MIMA LEF T F OR K RPD-MASON-1 MABSCOT T-CBM CON LEY MEAD E BR ANCH PET ERSBURG VAN LEAR SILVERTON RPD-SC IOT O-2 HURR ICANE CR EEK OT TER ROAD BRANCH SH AVERS FORK HAGERH ILL KEEL FORK CRAGER FORK CON TRARY BRAN CH HUNN EWELL S DUMPS CREEK DOBSON SCH OOL BU LAN DANIEL HINDMAN N LAU REL HILL CROOK PYR AMI D AU XIER LEF T F OR K B CUCU MBER CRK CHANEY CREEK DINGUS RPD-SC IOT O-3 MOORE BRANC H RPD-TAZ EWELL-1 PORT ER CAMP MOU SIE WILD CAT HOLLOW SPR ING CREEK RACCOON SCHOOL ALVIN W ROSC OE GEORGES F ORK DAVISPOR T N LEATH ER BAR K CRK MOON N RPD-673 RPD-678 RPD-520 RPD-334 RPD-335 RPD-510 RPD-100 RPD-333 RPD-509 RPD-280 MAL DEN SALYERSVILLE FAR LEY C HUR CH CEREDO LINCOLN ST RAT TON KNOB SALLY BR ANCH

466

OCCURRENCE REPORTING Approved by Jack Salazar  

E-Print Network (OSTI)

.2 Responsibilities 15.2.1 Division Directors 15.2.2 Division ORPS Designees 15.2.3 Environment, Health, and Safety -- Noncompliance Notifications 15.4.1.10 Group 10 -- Management Concerns/Issues 15.4.2 Appendix B. ORPS Report within a section. ____________________ 15.1 Purpose The Occurrence Reporting and Processing System (ORPS

467

NSA-Old Jack Pine Site  

NLE Websites -- All DOE Office Websites (Extended Search)

NSA-OJP) Aerial view of the NSA-OJP site during IFC 2. The Rohn tower and investigator hut are in the approximate center of the image with the generator hut at the extreme upper...

468

Jack Rains | Y-12 National Security Complex  

NLE Websites -- All DOE Office Websites (Extended Search)

EARLY CHILDHOOD I was born 7-7-36, and I was one of eight children, and we were living at Norris Lake at Demre community when they started building TVA. Then my dad had...

469

Jack Deslippe Joins NERSC User Services  

NLE Websites -- All DOE Office Websites (Extended Search)

choice for materials scientists studying excited state properties. Born in Winnipeg, Manitoba, Canada, Deslippe's family moved to Charleston, South Carolina when he was in high...

470

Jack DiEnna Executive Director  

E-Print Network (OSTI)

by the National Renewable Energy Laboratory (NREL) they determined that every installed ton of GHP capacity What do we call it... Geothermal, Ground Source, GeoExchange. The feds call it geothermal heat pumps's five boroughs the devastation has been stated to be over $30 BILLION. There are reports of over 4

471

JACK EDWARD RECHCIGL BUSINESS ADDRESS: HOME ADDRESS  

E-Print Network (OSTI)

impact of high rates of phosphogypsum applications on radioactivity in soil, groundwater, and bahiagrass,043 Florida Institute of Phosphate Research Impact of phosphogypsum on radon emissions and radioactivity Institute of Phosphate Research Influence of phosphogypsum on the environment and forage yield and quality

Jawitz, James W.

472

Lawrence Co. Scioto Co. Greenup Co. Jack  

Gasoline and Diesel Fuel Update (EIA)

outlines were created by the Reserves and Production Division, Office of Oil and Gas, Energy Information Administration pursuant to studies required by Section 604 of the Energy...

473

Mat. Sci. Training More Advanced Topics Jack ...  

NLE Websites -- All DOE Office Websites (Extended Search)

info conflict fftw3.2.2 e.g. Carver: Common Problems 1 Quantum ESPRESSO on Hopper: % cat README ... Quick installation instructions for the impatient: .configure options...

474

Energy efficiency improvement and cost saving opportunities for the Corn Wet Milling Industry: An ENERGY STAR Guide for Energy and Plant Managers  

E-Print Network (OSTI)

Characterization: Steam Turbines, Energy Nexus Group,coal, in boilers using steam turbines. A few generate onlylarge-scale mills use steam turbine systems. Switching to

Galitsky, Christina; Worrell, Ernst; Ruth, Michael

2003-01-01T23:59:59.000Z

475

NUCLEAR ISOTOPIC DILUTION OF HIGHLY ENRICHED URANIUM BY DRY BLENDING VIA THE RM-2 MILL TECHNOLOGY  

SciTech Connect

DOE has initiated numerous activities to focus on identifying material management strategies to disposition various excess fissile materials. In particular the INEEL has stored 1,700 Kg of offspec HEU at INTEC in CPP-651 vault facility. Currently, the proposed strategies for dispositioning are (a) aqueous dissolution and down blending to LEU via facilities at SRS followed by shipment of the liquid LEU to NFS for fabrication into LWR fuel for the TVA reactors and (b) dilution of the HEU to 0.9% for discard as a waste stream that would no longer have a criticality or proliferation risk without being processed through some type of enrichment system. Dispositioning this inventory as a waste stream via aqueous processing at SRS has been determined to be too costly. Thus, dry blending is the only proposed disposal process for the uranium oxide materials in the CPP-651 vault. Isotopic dilution of HEU to typically less than 20% by dry blending is the key to solving the dispositioning issue (i.e., proliferation) posed by HEU stored at INEEL. RM-2 mill is a technology developed and successfully tested for producing ultra-fine particles by dry grinding. Grinding action in RM-2 mill produces a two million-fold increase in the number of particles being blended in a centrifugal field. In a previous study, the concept of achieving complete and adequate blending and mixing (i.e., no methods were identified to easily separate and concentrate one titanium compound from the other) in remarkably short processing times was successfully tested with surrogate materials (titanium dioxide and titanium mono-oxide) with different particle sizes, hardness and densities. In the current project, the RM-2 milling technology was thoroughly tested with mixtures of natural uranium oxide (NU) and depleted uranium oxide (DU) stock to prove its performance. The effects of mill operating and design variables on the blending of NU/DU oxides were evaluated. First, NU and DU both made of the same oxide, UO{sub 3}, was used in the testing. Next, NU made up of UO{sub 3} and DU made up of UO{sub 2} was used in the test work. In every test, the blend achieved was characterized by spatial sampling of the ground product and analyzing for {sup 235}U concentration. The test work proved that these uranium oxide materials can be blended successfully. The spatial concentration was found to be uniform. Next, sintered thorium oxide pellets were used as surrogate for light water breeder reactor pellets (LWBR). To simulate LWBR pellet dispositioning, the thorium oxide pellets were first ground to a powder form and then the powder was blended with NU. In these tests also the concentration of {sup 235}U and {sup 232}Th in blended products fell within established limits proving the success of RM-2 milling technology. RM-2 milling technology is applicable to any dry radioactive waste, especially brittle solids that can be ground up and mixed with the non-radioactive stock.

Raj K. Rajamani; Sanjeeva Latchireddi; Vikas Devrani; Harappan Sethi; Roger Henry; Nate Chipman

2003-08-01T23:59:59.000Z

476

Microstructure and mechanical properties of 7075 aluminum alloy nanostructured composites processed by mechanical milling and indirect hot extrusion  

SciTech Connect

Nanostructured composites of 7075 aluminum alloy and carbon coated silver nanoparticles were produced by mechanical milling and indirect hot extrusion. The milling products were obtained in a high energy SPEX ball mill, and then were compacted by uniaxial load and pressure-less sintered under argon atmosphere. Finally, the sintered product was hot extruded. Carbon coated silver nanoparticles were well distributed in the matrix of the extruded material. Tensile tests were carried out to corroborate the hypothesis that second phase particles, well dispersed in the matrix, improve the strength of the material. High resolution transmission electron microscopy was employed to locate and make sure that the silver nanoparticles were homogeneously and finely dispersed. Highlights: Black-Right-Pointing-Pointer 7075 Al nanostructured composites can be produced by mechanical milling. Black-Right-Pointing-Pointer Carbon coated silver nanoparticles are well dispersed into aluminum matrix. Black-Right-Pointing-Pointer Ductile Ag-C NP's improve the mechanical properties of the 7075 Al-alloy. Black-Right-Pointing-Pointer Ag-C NP's content has an important effect in the particle and crystallite size. Black-Right-Pointing-Pointer Ag-C NP's keep their morphology after milling and conformation processes.

Flores-Campos, R., E-mail: ruben.flores@itesm.mx [Centro de Investigacion en Materiales Avanzados (CIMAV), Laboratorio Nacional de Nanotecnologia, Miguel de Cervantes No. 120, CP 31109, Chihuahua, Chih., Mexico (Mexico); Tecnologico de Monterrey Campus Saltillo, Departamento de Ingenieria, Prol. Juan de la Barrera No. 1241 Ote., Col. Cumbres, CP 25270, Saltillo, Coah., Mexico (Mexico); Estrada-Guel, I., E-mail: ivanovich.estrada@cimav.edu.mx [Centro de Investigacion en Materiales Avanzados (CIMAV), Laboratorio Nacional de Nanotecnologia, Miguel de Cervantes No. 120, CP 31109, Chihuahua, Chih., Mexico (Mexico); Miki-Yoshida, M., E-mail: mario.miki@cimav.edu.mx [Centro de Investigacion en Materiales Avanzados (CIMAV), Laboratorio Nacional de Nanotecnologia, Miguel de Cervantes No. 120, CP 31109, Chihuahua, Chih., Mexico (Mexico); Martinez-Sanchez, R., E-mail: roberto.martinez@cimav.edu.mx [Centro de Investigacion en Materiales Avanzados (CIMAV), Laboratorio Nacional de Nanotecnologia, Miguel de Cervantes No. 120, CP 31109, Chihuahua, Chih., Mexico (Mexico); Herrera-Ramirez, J.M., E-mail: martin.herrera@cimav.edu.mx [Centro de Investigacion en Materiales Avanzados (CIMAV), Laboratorio Nacional de Nanotecnologia, Miguel de Cervantes No. 120, CP 31109, Chihuahua, Chih., Mexico (Mexico)

2012-01-15T23:59:59.000Z

477

Engineering assessment of inactive uranium mill tailings, Shiprock site, Shiprock, New Mexico  

SciTech Connect

Ford, Bacon and Davis Utah Inc. has reevaluated the Shiprock site in order to revise the March 1977 engineering assessment of the problems resulting from the existence of radioactive uranium mill tailings at Shiprock, New Mexico. This engineering assessment has included the preparation of topographic maps, the performance of core drillings and radiometric measurements sufficient to determine areas and volumes of tailings and radiation exposures of individuals and nearby populations, the investigations of site hydrology and meteorology, and the evaluation and costing of alternative corrective actions. Radon gas released from the 1.5 million dry tons of tailings at the Shiprock site constitutes the most significant environental impact, although windblown tailings and external gamma radiation also are factors. The eight alternative actions presented in this engineering assessment range from millsite decontamination with the addition of 3 m of stabilization cover material (Option I), to removal of the tailings to remote disposal sites and decontamination of the tailings site (Options II through VIII). Cost estimates for the eight options range from about $13,400,000 for stabilization in place to about $37,900,000 for disposal at a distance of about 16 miles. Three principal alternatives for the reprocessing of the Shiprock tailings were examined: (a) heap leaching; (b) treatment at an existing mill; and (c) reprocessing at a new conventional mill constructed for tailings reprocessing. The cost of the uranium recovered would be about $230/lb by heap leach and $250/lb by conventional plant processes. The spot market price for uranium was $25/lb early in 1981. Therefore, reprocessing the tailings for uranium recovery is not economically attractive.

Not Available

1981-07-01T23:59:59.000Z

478

Finding and evaluating potential radiological problems in the vicinity of uranium milling sites  

Science Conference Proceedings (OSTI)

Tailings at inactive milling sites usually have a low frequency of human occupancy but continuously generate /sup 222/Rn into the atmosphere. Measurements of airborne /sup 222/Rn and /sup 222/Rn flux are made on the sites to define the tailings source term. Concurrently with these measurements, an ambient /sup 222/Rn monitoring network is established off-site and a meteolrololgical station is established at or near the mill site. Radioactivity can migrate to areas outside of site boundaries by wind and water erosion, groundwater transport, spillage of incoming purposes. In order to identify and assess off-site radioactivity on properties in the vicinity of milling sites, a combination of aerial and ground-level radiological monitoring techniques are used. The ground mobile gamma-ray scan is conducted using a vehicle equipped with sensitive gamma-ray detectors. The detectors are shielded so that gamma radiation input is viewed through only one side of the vehicle. This system is capable of precisely locating properties which have anomalously high gamma radiation levels caused by the presence of tailings. Subsequently, these properties are identified as candidate vicinity properties and are scheduled for radiological surveys subject to the property owner's consent. The comprehensive radiological surveys conducted at these vicinity properties determine the amount, type, and location of tailings materials. Structures on a vicinity property are carefully surveyed to determine the presence or absence of construction-related uses of tailings. If structural uses of tailings are found, air samples are analyzed for /sup 222/Rn progeny, short-term continuous /sup 222/Rn monitoring is instituted, and /sup 222/Rn flux rate from tailings are estimated. If warranted, long-term /sup 222/Rn and progeny measurements are made.

Goldsmith, W.A.; Yates, W.G.

1982-01-01T23:59:59.000Z

479

Engineering assessment of inactive uranium mill tailings: Phillips/United Nuclear site, Ambrosia Lake, New Mexico  

SciTech Connect

Ford, Bacon and Davis Utah, Inc., has reevaluated the Phillips/United Nuclear site in order to revise the December 1977 engineering assessment of the problems resulting from the existence of radioactive uranium mill tailings at Ambrosia Lake, New Mexico. This engineering assessment has included the preparation of topographic maps, the performance of core drillings and radiometric measurements sufficient to determine areas and volumes of tailings and radiation exposures of individuals and nearby populations, the investigations of site hydrology and meteorology, and the evaluation and costing of alternative corrective actions. Radon gas released from 2.6 million dry tons of tailings at the Phillips/United Nuclear site constitutes the most significant environmental impact, although windblown tailings and external gamma radiation also are factors. The four alternative actions presented in this engineering assessment range from millsite decontamination with the addition of 3 m of stabilization cover material, to removal of the tailings to remote disposal sites and decontamination of the tailings site. Cost estimates for the four options range from about $21,500,000 for stabilization in-place, to about $45,200,000 for disposal at a distance of about 15 mi. Three principal alternatives for the reprocessing of the Phillips/United Nuclear tailings were examined: heap leaching; treatment at an existing mill; and reprocessing at a new conventional mill constructed for tailings reprocessing.The cost of the uranium recovered would be about $87/lb of U/sub 3/O/sub 8/ by either heap leach or conventional plant process. The spot market price for uranium was $25/lb early in 1981. Reprocessing the Phillips/United Nuclear tailings for uranium recovery does not appear to be economically attractive under present or foreseeable market conditions.

Not Available

1981-10-01T23:59:59.000Z

480

Environmental assessment of remedial action at the slick rock Uranium Mill Tailings sites Slick Rock, Colorado  

SciTech Connect

The Uranium Mill Tailings Radiation Control Act of 1978 (42 USC {section} 7901 et seq.), hereafter referred to as the UMTRCA, authorized the U.S. Department of Energy (DOE) to clean up two uranium mill tailings processing sites near Slick Rock, Colorado, in San Miguel County. The purpose of the cleanup is to reduce the potential health effects associated with the radioactive materials remaining on the sites and on vicinity properties (VPs) associated with the sites. Contaminated materials cover an estimated 55 acres of the Union Carbide (UC) processing site and 12 ac of the North Continent (NC) processing site. The total estimated volume of contaminated materials is approximately 61 8,300 cubic yards. In addition to the contamination in the two processing site areas, four VPs were found to contain contamination. As a result of the tailings being exposed to the environment, contamination associated with the UC and NC sites has leached into shallow ground water. Surface water has not been affected. The closest residence is approximately 0.3 air mi from either site. The proposed action is to remediate the UC and NC sites by removing all contaminated materials within the designated site boundaries or otherwise associated with the sites, and relocating them to, and stabilizing them at, a location approximately 5 road mi (8 km) northeast of the sites on land administered by the Bureau of Land Management (BLM). Remediation would be performed by the DOE`s Uranium Mill Tailings Remedial Action (UMTRA) Project. All solid contaminated materials would be buried under 5 feet (ft) of rock and soil materials. The proposed disposal site area is currently used by ranchers for cattle grazing over a 7-month period. The closest residence to the proposed disposal site is 2 air mi. An estimated 44 ac of land would be permanently transferred from the BLM to the DOE and restricted from future use.

1994-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "jack wise mills" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

The Gluon Green's function in N=4 supersymmetric Yang-Mills theory.  

E-Print Network (OSTI)

energy limit of scattering amplitudes in the N = 4 supersymmetric Yang Mills theory is studied by solving the corresponding BFKL equation in the next toleading approximation. The gluon Greens function is analysed using a newly proposed method suitable... (~ka) ??(~kb) f ( ~ka, ~kb,Y ? ln s s0 ) , (1) where s0 = |~ka||~kb| is the Regge scale. The energy dependence is determined by the universal processindependent gluon Greens function f . The impact factors, ?,??, depend on the process under study...

Andersen, Jeppe R; Sabio Vera, Agustin

482

From Decay to Complete Breaking: Pulling the Strings in SU(2) Yang-Mills Theory  

Science Conference Proceedings (OSTI)

We study (2Q+1) strings connecting two static charges Q in (2+1)D SU(2) Yang-Mills theory. While the fundamental (2) string between two charges Q=(1/2) is unbreakable, the adjoint (3) string connecting two charges Q=1 can break. When a (4) string is stretched beyond a critical length, it decays into a (2) string by gluon pair creation. When a (5) string is stretched, it first decays into a (3) string, which eventually breaks completely. The energy of the screened charges at the ends of a string is well described by a phenomenological constituent gluon model.

Pepe, M. [INFN, Istituto Nazionale di Fisica Nucleare, Sezione di Milano-Bicocca, Edificio U2, Piazza della Scienza 3, 20126 Milano (Italy); Wiese, U.-J. [Center for Research and Education in Fundamental Physics, Institute for Theoretical Physics, Bern University, Sidlerstrasse 5, 3012 Bern (Switzerland); Institute for Theoretical Physics, ETH Zuerich, Schafmattstrasse 32, CH-8093 Zuerich (Switzerland)

2009-05-15T23:59:59.000Z

483

Environmental assessment of remedial action at the Maybell uranium mill tailings site near Maybell, Colorado  

SciTech Connect

The purpose of this environmental assessment (EA) is to evaluate the environmental impacts resulting from remedial action at the Maybell uranium mill tailings site near Maybell, Colorado. A biological assessment (Attachment 1) and a floodplain/wetlands assessment (Assessment 2) are included as part of this EA. The following sections and attachments describe the proposed action, affected environment, and environmental impacts associated with the proposed remedial action, including impacts to threatened and endangered species listed or proposed for listing by the US Fish and Wildlife Service.

Not Available

1993-09-01T23:59:59.000Z

484

Surface defects, the superconformal index and q-deformed Yang-Mills  

E-Print Network (OSTI)

Recently a prescription to compute the four-dimensional N = 2 superconformal index in the presence of certain BPS surface defects has been given. These surface defects are labelled by symmetric representations of SU(N). In the present paper we give a prescription to compute the superconformal index in the presence of surface defects labelled by arbitrary representations of SU(N). Furthermore, we extend the dictionary between the N = 2 superconformal Schur-index and correlators of q-deformed Yang-Mills to incorporate such surface defects.

Luis F. Alday; Mathew Bullimore; Martin Fluder; Lotte Hollands