Powered by Deep Web Technologies
Note: This page contains sample records for the topic "ized system distri" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Control and Protection of Power Electronics Interfaced Distri-buted Generation Systems in a Customer-Driven Microgrid  

E-Print Network (OSTI)

in a Customer-Driven Microgrid Fang Z. Peng, Yun Wei Li and Leon M. Tolbert Abstract ­ This paper discusses-driven microgrid (CDM). Particularly, the following topics will be addressed: microgrid system configurations); renewable energy source (RES); micro-source; microgrid; customer-driven micro- grid (CDM), power electronics

Tolbert, Leon M.

2

THE DEVELOPMENT OF DISTRI-bution systems poses new challenges  

E-Print Network (OSTI)

of natural disasters. IV. U.S. FEDERAL AND STATE GOVERNMENT POLICIES A. Federal Policies The first U plan of Massachusetts has substantially raised rates in order to cover future natural disaster losses the construction of new transmission lines. 1) Microgrids: One alternative to expanding the high- voltage

Catholic University of Chile (Universidad Católica de Chile)

3

b37.pdf  

U.S. Energy Information Administration (EIA) Indexed Site

ized ized System Distri- buted System Combination Centralized and Distributed Systems Central- ized System Distri- buted System Combination Centralized and Distributed Systems All Buildings .......................................... 4,657 3,239 2,472 566 200 67,338 56,115 35,579 10,899 9,637 Building Floorspace (Square Feet) 1,001 to 5,000 ......................................... 2,348 1,456 1,175 244 Q 6,774 4,280 3,411 767 Q 5,001 to 10,000 ....................................... 1,110 778 606 141 31 8,238 5,748 4,479 1,014 255 10,001 to 25,000 ..................................... 708 574 416 103 55 11,153 9,000 6,505 1,679 816 25,001 to 50,000 ..................................... 257 222 151 37 34 9,311 8,088 5,464 1,373 1,250 50,001 to 100,000 ................................... 145 127 79 23 25 10,112 8,887 5,534

4

Approved for public release; distri6ufion is unlimited.  

E-Print Network (OSTI)

-1946)............................................................................... 3 Early Cold War Era (1946-1956)............................................................................. 6 Late Cold War Era (1956-1990) .............................................................................. 7 Controlled ThermonuclearResearch Fusion and Controlled Thermonuclear

5

Systems  

E-Print Network (OSTI)

Abstract Developing usable and robust mixed reality systems requires unique humancomputer interaction techniques and customized hardware systems. The design of the hardware is directed by the requirements of the rich 3D interactions that can be performed using immersive mobile MR systems. Geometry modeling and capture, navigational annotations, visualizations, and training simulations are all enhanced using augmented computer graphics. We present the design guidelines that have led us through 10 years of evolving mobile outdoor MR hardware systems.

Benjamin Avery; Ross T. Smith; Wayne Piekarski; Bruce H. Thomas

2009-01-01T23:59:59.000Z

6

Released: June 2006  

U.S. Energy Information Administration (EIA) Indexed Site

2. Water Heating Equipment, Number of Buildings and Floorspace for Non-Mall Buildings, 2003" 2. Water Heating Equipment, Number of Buildings and Floorspace for Non-Mall Buildings, 2003" ,"Number of Buildings (thousand)",,,,,"Total Floorspace (million square feet)" ,"All Build- ings*","Build- ings with Water Heating","Type of Water Heating Equipment",,,"All Build- ings*","Build- ings with Water Heating","Type of Water Heating Equipment" ,,,"Central- ized System","Distrib- uted System","Combin- ation Central- ized and Distrib- uted Systems",,,"Central- ized System","Distrib- uted System","Combin- ation Central- ized and Distrib- uted Systems" "All Buildings* ...............",4645,3472,2513,785,175,64783,56478,34671,11540,10267

7

*Support from EPRI, NSF and ORNL for this work is gratefully acknowledged.  

E-Print Network (OSTI)

to customer-owned generation. also shown are mul- tiple emerging advanced automation and control systems to control signals to achieve advanced distribution automation. advanced protection schemes are part. major players in the distri- bution automation (da) arena include ansi c12.22 for meter communication

Amin, S. Massoud

8

Worst Case Scenario for Large Distribution Networks with Distributed Generation  

E-Print Network (OSTI)

and distribution networks, finally to the electric energy consumers. The life style of a nation is measured) in distri- bution network has significant effects on voltage profile for both customers and distribution of this formula is checked by comparing with the existing power systems simulation software. Using the voltage

Pota, Himanshu Roy

9

 

U.S. Energy Information Administration (EIA) Indexed Site

2. Water Heating Equipment, Number of Buildings and Floorspace for Non-Mall Buildings, 2003 2. Water Heating Equipment, Number of Buildings and Floorspace for Non-Mall Buildings, 2003 Number of Buildings (thousand) Total Floorspace (million square feet) All Build- ings* Build- ings with Water Heating Type of Water Heating Equipment All Build- ings* Build- ings with Water Heating Type of Water Heating Equipment Central- ized System Distrib- uted System Combin- ation Central- ized and Distrib- uted Systems Central- ized System Distrib- uted System Combin- ation Central- ized and Distrib- uted Systems All Buildings* ............................... 4,645 3,472 2,513 785 175 64,783 56,478 34,671 11,540 10,267 Building Floorspace (Square Feet) 1,001 to 5,000 ................................ 2,552 1,715 1,267 418 Q 6,789 4,759 3,452 1,206 Q 5,001 to 10,000 .............................. 889 725 557 150 Q 6,585 5,348 4,154 1,057 Q

10

Surveillance of vector populations and malaria transmission during the 2009/10 El Nino event in the western Kenya highlands: opportunities for early detection of malaria hyper-transmission  

E-Print Network (OSTI)

Kenya is character- ized by unstable transmission that is closely related the ecosystem type and weather

Ototo, Ednah N; Githeko, Andrew K; Wanjala, Christine L; Scott, Thomas W

2011-01-01T23:59:59.000Z

11

NETL: Gasification Systems - Feed Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Feed Systems Gasification Systems Feed Systems Research on commercial gasifier feed systems is occurring in two primary areas of fuel (i.e. coal, biomass, etc.) feed and advanced...

12

Photovoltaic system in system LABI  

Science Conference Proceedings (OSTI)

There is prepared a new model marked as DE10 to extens the system LABI. It is a photovoltaic system. Utilizing of model is into the field of university studying and as a pilot test system for all extern experts. A special parts of model are measurement ... Keywords: automation, measurement, photovoltaic system, sun energy

Hruska Frantisek

2010-07-01T23:59:59.000Z

13

File Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

File Systems File Systems File Systems For a general description of the different file systems available on PDSF please see Eliza File Systems and Other File Systems. Below is a summary of how STAR uses the various systems: /common The STAR software is installed on /common. For 32sl44 it is under /common/star/star44 and for sl53 it is under /common/star/star53. In both cases the software consists primarily of a STAR-specific ROOT installation on which releases of the STAR libraries are built as shown on the Local STAR Libraries page. /eliza3, /eliza6, /eliza9, /eliza14, /eliza15, /eliza17 STAR has space on 6 elizas as shown in the table below. File System star space (TB) use eliza3 39 production eliza6 9 production eliza9 39 production eliza14 34 production, user space under /eliza14/star/pwg

14

Gasification Systems Projects & Performers  

NLE Websites -- All DOE Office Websites (Extended Search)

Gasification Systems Gasification Systems Projects & Performers Gasification Systems - Key Technologies Feed Systems Gasifier Optimization and Plant Supporting Systems Syngas...

15

System Effectiveness  

SciTech Connect

An effective risk assessment system is needed to address the threat posed by an active or passive insider who, acting alone or in collusion, could attempt diversion or theft of nuclear material. It is critical that a nuclear facility conduct a thorough self-assessment of the material protection, control, and accountability (MPC&A) system to evaluate system effectiveness. Self-assessment involves vulnerability analysis and performance testing of the MPC&A system. The process should lead to confirmation that mitigating features of the system effectively minimize the threat, or it could lead to the conclusion that system improvements or upgrades are necessary to achieve acceptable protection against the threat. Analysis of the MPC&A system is necessary to understand the limits and vulnerabilities of the system to internal threats. Self-assessment helps the facility be prepared to respond to internal threats and reduce the risk of theft or diversion of nuclear material. MSET is a self-assessment or inspection tool utilizing probabilistic risk assessment (PRA) methodology to calculate the system effectiveness of a nuclear facility's MPC&A system. MSET analyzes the effectiveness of an MPC&A system based on defined performance metrics for MPC&A functions based on U.S. and international best practices and regulations. A facility's MC&A system can be evaluated at a point in time and reevaluated after upgrades are implemented or after other system changes occur. The total system or specific subareas within the system can be evaluated. Areas of potential performance improvement or system upgrade can be assessed to determine where the most beneficial and cost-effective improvements should be made. Analyses of risk importance factors show that sustainability is essential for optimal performance. The analyses reveal where performance degradation has the greatest detrimental impact on total system risk and where performance improvements have the greatest reduction in system risk. The risk importance factors show the amount of risk reduction achievable with potential upgrades and the amount of risk reduction actually achieved after upgrades are completed. Applying the risk assessment tool gives support to budget prioritization by showing where budget support levels must be sustained for MC&A functions most important to risk. Results of the risk assessment are also useful in supporting funding justifications for system improvements that significantly reduce system risk.

Powell, Danny H [ORNL; Elwood Jr, Robert H [ORNL

2011-01-01T23:59:59.000Z

16

Advanced Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Systems: Advanced Systems: high Performance fenestration systems Research areas: Research activities to improve the performance of windows and other fenestration products must address window systems issues as well as Glazing Materials research. LBNL activities in the area of Advanced Systems include research at both the product level and the building envelope and building systems levels. Highly insulating windows - using non structural center layers Lower cost solutions to more insulating three layer glazing systems, with the potential to turn windows in U.S. heating dominated residential applications into net-energy gainers. Highly Insulating Window Frames In collaboration with the Norwegian University of Science and Technology, we are researching the potentials for highly insulating window frames. Our initial work examines European frames with reported U-factors under 0.15 Btu/hr-ft2-F. Future research aims to analyze these designs, verify these performance levels and ensure that procedures used to calculate frame performance are accurate.

17

AEP Systems  

Science Conference Proceedings (OSTI)

... Avoid costs of retrofitting systems to support secure access Produced by the Yankee Group http://www.yankeegroup.com Page 25. ...

2007-09-25T23:59:59.000Z

18

NETL: Gasification Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Gasification Systems Coal and Power Systems Gasification Systems Gasifier Optimization & Plant Supporting Systems Feed Systems Feed Systems Gasifier Optimization & Plant Supporting...

19

Power system  

DOE Patents (OSTI)

A power system includes a prime mover, a transmission, and a fluid coupler having a selectively engageable lockup clutch. The fluid coupler may be drivingly connected between the prime mover and the transmission. Additionally, the power system may include a motor/generator drivingly connected to at least one of the prime mover and the transmission. The power-system may also include power-system controls configured to execute a control method. The control method may include selecting one of a plurality of modes of operation of the power system. Additionally, the control method may include controlling the operating state of the lockup clutch dependent upon the mode of operation selected. The control method may also include controlling the operating state of the motor/generator dependent upon the mode of operation selected.

Hickam, Christopher Dale (Glasford, IL)

2008-03-18T23:59:59.000Z

20

Gasification Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

GASIFICATION SYSTEMS U.S. DEPARTMENT OF ENERGY TECHNOLOGY PROGRAM PLAN PREFACE ii DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United...

Note: This page contains sample records for the topic "ized system distri" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Photovoltaic Systems  

Energy.gov (U.S. Department of Energy (DOE))

A photovoltaic (PV), or solar electric system, is made up of several photovoltaic solar cells. An individual PV cell is usually small, typically producing about 1 or 2 watts of power. To boost the...

22

Type systems  

Science Conference Proceedings (OSTI)

The study of type systems has emerged as one of the most active areas of research in programming languages, with applications in software engineering, language design, high-performance compiler implementation, and security. This chapter discusses the ...

Benjamin C. Pierce

2003-01-01T23:59:59.000Z

23

Battery system  

DOE Patents (OSTI)

A battery module includes a plurality of battery cells and a system configured for passing a fluid past at least a portion of the plurality of battery cells in a parallel manner.

Dougherty, Thomas J; Wood, Steven J; Trester, Dale B; Andrew, Michael G

2013-08-27T23:59:59.000Z

24

Weekly Petroleum Status Report - Energy Information Administration  

U.S. Energy Information Administration (EIA)

Crude oil, gasoline, heating oil, diesel, propane, and other liquids including biofuels and natural gas liquids. ... Stocks of Crude Oil by PAD Distri ...

25

Calibration of High Heat Flux Sensors at NIST  

Science Conference Proceedings (OSTI)

... sides and uniform distri- bution of flow across the tube cross section, the ... is beneficial in minimizing the stagnation point flow heat transfer effects on ...

2012-10-18T23:59:59.000Z

26

Quick, Efficient Film Deposition for Nanomaterials - Energy ...  

Electricity Transmission; Energy Analysis; ... Films can be deposited uniformly in a one-step deposition of nanoparticles with optimized drop distri ...

27

European Regional Studies: A Coming of Age? - Springer  

Science Conference Proceedings (OSTI)

Despite these and other creative approaches to the analysis of artifact distri- butions, we are ...... Patterns of the Past: Essays in Landscape. Archaeology for...

28

ISSN 2040-3364 www.rsc.org/nanoscale Volume 3 | Number 2 | February 2011 | Pages 317752  

E-Print Network (OSTI)

), and patterned targeting, such as stripes on tissue.19) This protocol is real- ized by shuttering the beam

Cai, Wei

29

Trigeneration in a northern Chinese village using crop residues  

E-Print Network (OSTI)

) in a central- ized village gasifier. Some of the gas so generated would be distributed via PVC pipes

30

Systems Studies  

DOE Green Energy (OSTI)

The Systems Studies Activity had two objectives: (1) to investigate nontechnical barriers to the deployment of biomass production and supply systems and (2) to enhance and extend existing systems models of bioenergy supply and use. For the first objective, the Activity focused on existing bioenergy markets. Four projects were undertaken: a comparative analysis of bioenergy in Sweden and Austria; a one-day workshop on nontechnical barriers jointly supported by the Production Systems Activity; the development and testing of a framework for analyzing barriers and drivers to bioenergy markets; and surveys of wood pellet users in Sweden, Austria and the US. For the second objective, two projects were undertaken. First, the Activity worked with the Integrated BioEnergy Systems (TBS) Activity of TEA Bioenergy Task XIII to enhance the BioEnergy Assessment Model (BEAM). This model is documented in the final report of the IBS Activity. The Systems Studies Activity contributed to enhancing the feedstock portion of the model by developing a coherent set of willow, poplar, and switchgrass production modules relevant to both the US and the UK. The Activity also developed a pretreatment module for switchgrass. Second, the Activity sponsored a three-day workshop on modeling bioenergy systems with the objectives of providing an overview of the types of models used to evaluate bioenergy and promoting communication among bioenergy modelers. There were nine guest speakers addressing different types of models used to evaluate different aspects of bioenergy, ranging from technoeconomic models based on the ASPEN software to linear programming models to develop feedstock supply curves for the US. The papers from this workshop have been submitted to Biomass and Bioenergy and are under editorial review.

Graham, R.L.

1998-03-17T23:59:59.000Z

31

NETL: Gasification - Systems Analyses  

NLE Websites -- All DOE Office Websites (Extended Search)

System Analyses Gasification Systems Systems Analyses Go to the NETL Gasification Systems Program's Systems and Industry Analyses Studies Technology & CostPerformance Studies NETL...

32

Lighting Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Purple LED lamp Purple LED lamp Lighting Systems Lighting research is aimed at improving the energy efficiency of lighting systems in buildings and homes across the nation. The goal is to reduce lighting energy consumption by 50% over twenty years by improving the efficiency of light sources, and controlling and delivering illumination so that it is available, where and when needed, and at the required intensity. Research falls into four main areas: Sources and Ballasts, Light Distribution Systems, Controls and Communications, and Human Factors. Contacts Francis Rubinstein FMRubinstein@lbl.gov (510) 486-4096 Links Lighting Research Group Batteries and Fuel Cells Buildings Energy Efficiency Applications Commercial Buildings Cool Roofs and Heat Islands Demand Response Energy Efficiency Program and Market Trends

33

Natural System  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Natural System Natural System Evaluation and Tool Development - FY11 Progress Report Prepared for U.S. Department of Energy Used Fuel Disposition Program Yifeng Wang (SNL) Michael Simpson (INL) Scott Painter (LANL) Hui-Hai Liu (LBNL) Annie B. Kersting (LLNL) July 15, 2011 FCRD-USED-2011-000223 UFD Natural System Evaluation - FY11 Year-End Report July 15, 2011 2 DISCLAIMER This information was prepared as an account of work sponsored by an agency of the U.S. Government. Neither the U.S. Government nor any agency thereof, nor any of their employees, makes any warranty, expressed or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness, of any information, apparatus, product, or process disclosed, or represents that its use would not infringe

34

ARAC system  

SciTech Connect

In spite of the remarkable safety record of the nuclear industry as a whole, recent public concern over the potential impact of the industry's accelerated growth has prompted ERDA to expand its emergency response procedures. The Atmospheric Release Advisory Capability, ARAC, is a computer communications system designed to enhance the existing emergency response capability of ERDA nuclear facilities. ARAC will add at least two new functions to this capability: centralized, real-time data acquisition and storage, and simulation of the long range atmospheric transport of hazardous materials. To perform these functions, ARAC employs four major sub-systems or facilities: the site facility, the central facility, the global weather center and the regional model. The system has been under development for the past two years at the Lawrence Livermore Laboratory of the University of California. (auth)

Kelly, M.F.; Wyman, R.H.

1975-12-10T23:59:59.000Z

35

BAE Systems  

E-Print Network (OSTI)

Information fusion system designs require sensor and resource management (SM) for effective and efficient data collection, processing, and dissemination. Common Level 4 fusion sensor management (or process refinement) inter-relations with target tracking and identification (Level 1 fusion) have been detailed in the literature. At the ISIF Fusion Conference, a panel discussion was held to examine the contemporary issues and challenges pertaining to the interaction between SM and situation and threat assessment (Level 2/3 fusion). This summarizes the key tenants of the invited panel experts. The common themes were: 1) Addressing the user in system control, 2) Determining a standard set of metrics,

Erik Blasch; John Salerno; Ivan Kadar; Ken Hintz; J. Biermann; Chee Chong; Subrata Das

2007-01-01T23:59:59.000Z

36

Investigating Army systems and Systems of Systems for value robustness  

E-Print Network (OSTI)

This thesis proposes a value robustness approach to architect defense systems and Systems of Systems (SoS). A value robust system or SoS has the ability to provide continued value to stakeholders by performing well to meet ...

Koo, Kevin C. K. (Kevin Cheng Keong)

2010-01-01T23:59:59.000Z

37

NREL: Energy Systems Integration - Energy Systems Integration...  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Systems Integration Facility NREL's Energy Systems Integration Facility Garners LEED Platinum View the NREL Press Release. NREL's multistory Energy Systems Integration...

38

Gasification Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

GASIFICATION SYSTEMS GASIFICATION SYSTEMS U.S. DEPARTMENT OF ENERGY TECHNOLOGY PROGRAM PLAN PREFACE ii DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference therein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any

39

Burner systems  

DOE Patents (OSTI)

A burner system particularly useful for downhole deployment includes a tubular combustion chamber unit housed within a tubular coolant jacket assembly. The combustion chamber unit includes a monolithic tube of refractory material whose inner surface defines the combustion zone. A metal reinforcing sleeve surrounds and extends the length of the refractory tube. The inner surface of the coolant jacket assembly and outer surface of the combustion chamber unit are dimensioned so that those surfaces are close to one another in standby condition so that the combustion chamber unit has limited freedom to expand with that expansion being stabilized by the coolant jacket assembly so that compression forces in the refractory tube do not exceed about one-half the safe compressive stress of the material; and the materials of the combustion chamber unit are selected to establish thermal gradient parameters across the combustion chamber unit to maintain the refractory tube in compression during combustion system start up and cool down sequences.

Doherty, Brian J. (Marblehead, MA)

1984-07-10T23:59:59.000Z

40

CONTROL SYSTEM  

DOE Patents (OSTI)

A boiling water type nuclear reactor power system having improved means of control is described. These means include provisions for either heating the coolant-moderator prior to entry into the reactor or shunting the coolantmoderator around the heating means in response to the demand from the heat engine. These provisions are in addition to means for withdrawing the control rods from the reactor. (AEC)

Shannon, R.H.; Williamson, H.E.

1962-10-30T23:59:59.000Z

Note: This page contains sample records for the topic "ized system distri" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Gasification system  

DOE Patents (OSTI)

A method and system for injecting coal and process fluids into a fluidized bed gasification reactor. Three concentric tubes extend vertically upward into the fluidized bed. Coal particulates in a transport gas are injected through an inner tube, and an oxygen rich mixture of oxygen and steam are injected through an inner annulus about the inner tube. A gaseous medium relatively lean in oxygen content, such as steam, is injected through an annulus surrounding the inner annulus.

Haldipur, Gaurang B. (Hempfield, PA); Anderson, Richard G. (Penn Hills, PA); Cherish, Peter (Bethel Park, PA)

1983-01-01T23:59:59.000Z

42

Gasification system  

DOE Patents (OSTI)

A method and system for injecting coal and process fluids into a fluidized bed gasification reactor. Three concentric tubes extend vertically upward into the fluidized bed. Coal particulates in a transport gas are injected through an inner tube, and an oxygen rich mixture of oxygen and steam are injected through an inner annulus about the inner tube. A gaseous medium relatively lean in oxygen content, such as steam, is injected through an annulus surrounding the inner annulus.

Haldipur, Gaurang B. (Hempfield, PA); Anderson, Richard G. (Penn Hills, PA); Cherish, Peter (Bethel Park, PA)

1985-01-01T23:59:59.000Z

43

Integrated System  

NLE Websites -- All DOE Office Websites (Extended Search)

Integrated Window System Our research activities in the field of high performance windows have led us to conclude that even by using high performance insulating glass units, low conductivity frames, and warm edge spacers, there are still untapped sources for improving energy efficiency in the design and use of residential windows. While such high performance windows are a dramatic improvement over conventional units, they do not reduce conductive losses through wall framing around the window, offer guarantees against excessive wall/window infiltration nor do they adapt to the daily and seasonal potentials for night insulation and summer shading. To meet this need, we have been working on the design, development, and prototyping of Integrated Window Systems (IWS) since 1993. Integrated Window Systems are a form of panelized construction where the wall panel includes an operable or fixed window sash, recessed night insulation, integral solar shading, and is built in a factory setting in order to minimize thermal short circuits and infiltration at joints. IWSs can be built in modular lengths to facilitate their installation with conventional wood frame stick construction or other forms of panelized construction.

44

Advanced Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Optimal gap width for double and triple glazing systems Optimal gap width for double and triple glazing systems Glazing systems in the US are commonly designed with a 1/2 " (12.7 mm) gap. The optimal gap width depends on many factors, such as gas fill (air, argon, krypton), the use of Low-e coatings, the environmental conditions (temperature difference across the window), and the calculation standard used. NFRC standard conditions are -18 C (-0.4 F) outside, and 21 C (69.8 F) inside. The calculation standard used in the US is based on the ISO 15099 standard. European standard conditions are 0 C (32 F) outside, and 20 C (68 F) inside. The calculation standard is based on the EN 673 standard. A number of common glazing configurations both with and without Low-e coatings, and with a variety of gas fills were evaluated using both the North American NFRC standard and the European EN 673 standard. All results were calculated using WINDOW 6.3 from LBNL. All IGU's (Insulated Glazing Units) have a standard height of 1 meter.

45

Braking system  

DOE Patents (OSTI)

A balanced braking system comprising a plurality of braking assemblies located about a member to be braked. Each of the braking assemblies consists of a spring biased piston of a first material fitted into a body of a different material which has a greater contraction upon cooling than the piston material. The piston is provided with a recessed head portion over which is positioned a diaphragm and forming a space therebetween to which is connected a pressurized fluid supply. The diaphragm is controlled by the fluid in the space to contact or withdraw from the member to be braked. A cooling means causes the body within which the piston is fitted to contract more than the piston, producing a tight shrink fit therebetween. The braking system is particularly applicable for selectively braking an arbor of an electron microscope which immobilizes, for example, a vertically adjustable low temperature specimen holder during observation. The system provides balanced braking forces which can be easily removed and re-established with minimal disturbance to arbor location.

Norgren, D.U.

1982-09-23T23:59:59.000Z

46

Components of systems software for parallel systems  

Science Conference Proceedings (OSTI)

Systems software for clusters and other parallel systems affects multiple types of users. End users interact with it to submit and interact with application jobs and to avail themselves of scalable system tools. Systems administrators interact with it ...

Ewing Lusk

2005-09-01T23:59:59.000Z

47

Advanced Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Glazing Systems Glazing Systems Using Non-Structural Center Glazing Layers Windows in the United States use aproximately 2 quads a year in heating energy, approximately one third of all building space heating energy used and the largest single end use attributed to windows. Even if all existing windows were replaced with today’s ENERGY STAR low-e products (U values < 0.35 Btu/hr-ft2-F), windows related heating would still be over 1 Quad. Because heating loads are strongly tied to conductive losses, technologies which lead to lower window U-factors are the key to reducing heating energy. A 0.1 Btu/hr-ft2-F window is targeted as a product, which will meet the requirements of zero-energy homes. Dynamic control of solar gains will further reduce heating needs by allowing winter solar heat gains to be effectively utilized while limiting cooling season gains. Significant cooling load savings can also be expected from lower U-factor windows in certain climates and from dynamic windows in all climates.

48

Transfer system  

DOE Patents (OSTI)

A transport system includes a traveling rail (1) which constitutes a transport route and a transport body (3) which is capable of traveling on the traveling rail in the longitudinal direction of the traveling rail. Flexible drive tubes (5) are arranged on the traveling rail in the longitudinal direction of the traveling rail. The transport body includes a traveling wheel (4) which is capable of rolling on the traveling rail and drive wheels (2) which are capable of rolling on the drive tubes upon receiving the rotational drive power generated by pressure of a pressure medium supplied to the drive tubes while depressing the drive tubes. The traveling rail includes a plurality of transport sections and the transport body is capable of receiving a rotational drive force from the drive tubes at every transport sections. If necessary, a transport route changeover switch which changes over the transport route can be provided between the transport sections.

Kurosawa, Kanji (Tokyo, JP); Koga, Bunichiro (Miyagi, JP); Ito, Hideki (Miyagi, JP); Kiriyama, Shigeru (Miyagi, JP); Higuchi, Shizuo (Kanagawa, JP)

2003-05-20T23:59:59.000Z

49

Battery system  

SciTech Connect

This patent describes a battery system for use with a battery powered device. It comprises a battery pack, the battery pack including; battery cells; positive and negative terminals serially coupled to the battery cells, the positive terminal being adapted to deliver output current to a load and receive input current in the direction of charging current; circuit means coupled to the positive and negative terminals and producing at an analog output terminal an analog output signal related to the state of charge of the battery cells; and display means separate from the battery pack and the battery powered device and electrically coupled to the analog output terminal for producing a display indicating the state of charge of the battery cells in accordance with the analog output signal.

Sokira, T.J.

1991-10-15T23:59:59.000Z

50

Environmental Management System  

NLE Websites -- All DOE Office Websites (Extended Search)

Video Community, Environment Environmental Stewardship Environmental Protection Environmental Management System Environmental Management System An Environmental...

51

Systems Infrastructure (SYS 18)  

E-Print Network (OSTI)

Networked Sensing Systems Infrastructure John Hicks, Karencomponents The Systems Infrastructure team assembles, tests,

Richard Guy; John Hicks; Karen Weeks

2006-01-01T23:59:59.000Z

52

SYS 5: Systems Infrastructure  

E-Print Network (OSTI)

Networked Sensing Systems Infrastructure Kevin Chang, Johnnents The Systems Infrastructure team assembles, tests, and

2006-01-01T23:59:59.000Z

53

TRANSCOM Fact Sheet  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Features: Features: Position and Messaging: data is updated at 4 to 7-minute intervals and shared with author- ized Federal, State and Tribal customers across the United States. 2-Way communications: Communications Cen- ter and Shipper have two way communications with Drivers. Route Deviation: can alert the operator if a route deviation has occurred. TRANSCOM is the Department of Energy (DOE) satellite tracking and communications system used to monitor radioactive material shipments from DOE and Nuclear Regulatory Commission (NRC) licensee facilities. Examples of materials tracked include: * Transuranic Waste * Spent Nuclear Fuel * Foreign Research Reactor Fuel TRANSCOM program com- ponents: Vehicle Communication System: On-board vehicle equipment with near real-time tracking

54

NREL: Energy Systems Integration - Energy Systems Integration...  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Systems Integration Facility Newsroom The Energy Systems Integration Facility (ESIF) will be one of the only megawatt-scale test facilities in the United States that...

55

Laser Music System.  

E-Print Network (OSTI)

?? A Laser Music System has been created, that combines a laser and light sensor system with an infrared distance sensing system that detects the (more)

Woodruff, Astra

2012-01-01T23:59:59.000Z

56

NERSC Computational Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

My NERSC Getting Started Computational Systems Edison Hopper Carver Dirac PDSF Genepool Testbeds Retired Systems Data & File Systems Network Connections Queues and Scheduling Job...

57

Minimal fusion systems.  

E-Print Network (OSTI)

??We define minimal fusion systems in a way that every non-solvable fusion system has a section which is minimal. Minimal fusion systems can also be (more)

Henke, Ellen

2010-01-01T23:59:59.000Z

58

Communication Systems Chair of Communication Systems  

E-Print Network (OSTI)

, porn sites, web services, ... :-)) #12;8 | 28 Communication Systems network insecurity Inner and intra

Schindelhauer, Christian

59

TRANSPORTATION SYSTEMS Transportation systems are the building  

E-Print Network (OSTI)

TRANSPORTATION SYSTEMS Transportation systems are the building blocks of modern society. Efficient mobility improves the quality of life. However, transportation systems by their very nature also affect quality. The transportation systems graduate pro- gram provides in-depth knowledge on the design

Wang, Yuhang

60

Complex System Classification  

E-Print Network (OSTI)

The use of terms such as Engineering Systems, System of systems and others have been coming into greater use over the past decade to denote systems of importance but with implied higher complexity than for the term ...

Magee, Christopher

2004-07-24T23:59:59.000Z

Note: This page contains sample records for the topic "ized system distri" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Systems Engineering Group  

Science Conference Proceedings (OSTI)

... advances, and deploys measurement science to address application of engineering information systems to complex cyber-physical systems. ...

2011-10-03T23:59:59.000Z

62

Networked Control Systems Group  

Science Conference Proceedings (OSTI)

... and deploys measurement science for sensor networks and control systems used in manufacturing, construction, and other cyber-physical systems ...

2012-08-30T23:59:59.000Z

63

Systems Integration Division Homepage  

Science Conference Proceedings (OSTI)

... systems integration and engineering, life cycle assessment, cyber-physical systems, productivity measurement, sustainability and energy efficiency. ...

2013-09-16T23:59:59.000Z

64

Complex Systems Program Homepage  

Science Conference Proceedings (OSTI)

... Systems Program seeks to understand the fundamental science of these ... Complex Systems Fundamentals Roldan Pozo; Measurement Science for ...

2011-12-28T23:59:59.000Z

65

NETL: Gasification Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Brochures Gasification Systems Reference Shelf - Brochures The Gasification Technology brochures are as follows: Gasification Plant Databases (Aug 2013) Gasification Systems...

66

Sensors, Instrumentation Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Sensors, Instrumentation Systems science-innovationassetsimagesicon-science.jpg Sensors, Instrumentation Systems National security depends on science and technology. The...

67

Public Safety Communication Systems  

Science Conference Proceedings (OSTI)

... integrate legacy communication and information systems and ... will support system analysis and troubleshooting ... create a global market for equipment ...

2012-12-13T23:59:59.000Z

68

Environmental Management Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Environmental Management Systems Technical Assistance Tools Technical Assistance Tool: Integrating Sustainable Practices into Environmental Management Systems , November 2009...

69

DiaelectricCharact  

NLE Websites -- All DOE Office Websites (Extended Search)

Dielectric Characterization Dielectric Characterization Manufacturing Technologies The Manufacturing Science and Technology Center provides a broad range of dielectric characterization for electroceramics either in bulk or thin film form. Special emphasis is placed on the dielectric characterization on ferroelectrics, varistor ceramics and thick film materials. Quick system integra- tion, combined with our expertise in data acquisition, enables us to perform special- ized tasks beyond basic dielectric charac- terization within limited time constraints. Capabilities * Perform basic dielectric characterization as a function of temperature, frequency, and dc bias * Determine the ac and dc conductivity, characteristics of polarization reversal, field-induced electromechanical responses, and piezoelectric coefficients

70

System Demonstration Multilingual Weather Forecast Generation System  

E-Print Network (OSTI)

System Demonstration Multilingual Weather Forecast Generation System Tianfang Yao DongmoZhang Qian (Multilingual Weather Forecasts Assistant) system will be demonstrated. It is developed to generate the multilingual text of the weather forecasts automatically. The raw data from the weather observation can be used

71

Systems Analysis Workshop Purpose  

NLE Websites -- All DOE Office Websites (Extended Search)

National Renewable Energy Laboratory National Renewable Energy Laboratory DOE Hydrogen Program DOE Hydrogen Program Systems Analysis Workshop Systems Analysis Workshop Systems Integration Production Delivery Conversion Application Education Codes & Standards Safety Tech Validation Storage Systems Integration Production Delivery Conversion Application Education Codes & Standards Safety Tech Validation Storage Washington D.C. 28-29 Jul 04 Dale Gardner Systems Integration Operated for the U.S. Department of Energy by Midwest Research Institute * Battelle 2 Systems Analysis Workshop Topics * Meeting Goals * Systems Integration * Roles/Responsibilities of Analysis Participants * Systems Analysis * From this Workshop * Capability Presentations 3 Systems Analysis Workshop Meeting Goals 1) Understand the roles and activities of the DOE Technology Analyst,

72

Energy Systems Integration  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Systems Integration Systems Integration Ben Kroposki, PhD, PE Director, Energy Systems Integration National Renewable Energy Laboratory 2 Reducing investment risk and optimizing systems in a rapidly changing energy world * Increasing penetration of variable RE in grid * Increasing ultra high energy efficiency buildings and controllable loads * New data, information, communications and controls * Electrification of transportation and alternative fuels * Integrating energy storage (stationary and mobile) and thermal storage * Interactions between electricity/thermal/fuels/data pathways * Increasing system flexibility and intelligence Current Energy Systems Future Energy Systems Why Energy Systems Integration? 3 Energy Systems Integration Continuum Scale Appliance (Plug)

73

Learning classifier systems  

Science Conference Proceedings (OSTI)

This tutorial gives an introduction to Learning Classifier Systems focusing on the Michigan-Style type and XCS in particular. The objective is to introduce (1) where LCSs come from, (2) how LCSs generally work, (3) which different systems exist, (4) ... Keywords: adaptive systems, cognitive systems, datamining, function approximation, genetic algorithms, learning classifier systems, machine learning, regression, reinforcement learning

Martin V. Butz

2010-07-01T23:59:59.000Z

74

Evaluation of systems usability  

Science Conference Proceedings (OSTI)

Motivation -- Development of complex system interfaces can benefit, in addition to the traditional safety focused evaluation, also from a usability approach to evaluation of system performance. But as the users, the information system, and the ... Keywords: activity theory, complex systems, joint cognitive systems, usability evaluation

Paula Savioja; Leena Norros; Leena Salo

2008-01-01T23:59:59.000Z

75

Lighting system with thermal management system  

DOE Patents (OSTI)

Lighting systems having unique configurations are provided. For instance, the lighting system may include a light source, a thermal management system and driver electronics, each contained within a housing structure. The light source is configured to provide illumination visible through an opening in the housing structure. The thermal management system is configured to provide an air flow, such as a unidirectional air flow, through the housing structure in order to cool the light source. The driver electronics are configured to provide power to each of the light source and the thermal management system.

Arik, Mehmet; Weaver, Stanton; Stecher, Thomas; Seeley, Charles; Kuenzler, Glenn; Wolfe, Jr., Charles; Utturkar, Yogen; Sharma, Rajdeep; Prabhakaran, Satish; Icoz, Tunc

2013-05-07T23:59:59.000Z

76

Concentrator Photovoltaic Systems  

Energy.gov (U.S. Department of Energy (DOE))

Concentrator photovoltaic (PV) systems use less solar cell material than other PV systems. PV cells are the most expensive components of a PV system, on a per-area basis. A concentrator makes use...

77

Steam System Optimization  

E-Print Network (OSTI)

Most plant steam systems are complex systems. Usually the fuel required to produce the steam represents a major expense for manufacturing facilities. By properly operating and maintaining the steam system and making minor improvements, significant savings can be realized.

Aegerter, R. A.

1998-04-01T23:59:59.000Z

78

Hybrid Systems Diagnosis  

Science Conference Proceedings (OSTI)

This paper reports on an on-going project to investigate techniques to diagnose complex dynamical systems that are modeled as hybrid systems. In particular, we examine continuous systems with embedded supervisory controllers that experience abrupt, partial ...

Sheila A. McIlraith; Gautam Biswas; Dan Clancy; Vineet Gupta

2000-03-01T23:59:59.000Z

79

Data & File Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Data Management Policies NERSC File Systems HPSS Data Archive Optimizing IO performance on the Lustre file system IO Formats Sharing Data Transferring Data Unix Groups at NERSC...

80

Manufacturing Skills Certification System  

Science Conference Proceedings (OSTI)

... system to their business so that they utilize the skills certification system ... provide input to The Manufacturing Institute about aggregate skill needs of ...

2012-09-20T23:59:59.000Z

Note: This page contains sample records for the topic "ized system distri" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Sustainable Energy Systems Group  

NLE Websites -- All DOE Office Websites (Extended Search)

Sustainable Energy Systems Group The Sustainable Energy Systems Group studies the impacts of energy generation and use, manufacturing, and other activities on the environment, the...

82

Usability for Biometric Systems  

Science Conference Proceedings (OSTI)

... to improve the usability of biometric systems, it is ... users will have with a system, including the hardware, software and instructional design of a ...

2010-10-05T23:59:59.000Z

83

Jobstream Separator System Design  

Science Conference Proceedings (OSTI)

... any unprivileged PDP-11/45 machine instruction or invoke ... are not an inherent part of the JSS system. ... Four of the six systems are }~C, SAC, NORAD ...

2013-04-15T23:59:59.000Z

84

Umbra's system representation.  

SciTech Connect

This document describes the Umbra System representation. Umbra System representation, initially developed in the spring of 2003, is implemented in Incr/Tcl using concepts borrowed from Carnegie Mellon University's Architecture Description Language (ADL) called Acme. In the spring of 2004 through January 2005, System was converted to Umbra 4, extended slightly, and adopted as the underlying software system for a variety of Umbra applications that support Complex Systems Engineering (CSE) and Complex Adaptive Systems Engineering (CASE). System is now a standard part Of Umbra 4. While Umbra 4 also includes an XML parser for System, the XML parser and Schema are not described in this document.

McDonald, Michael James

2005-07-01T23:59:59.000Z

85

Control system design method  

Science Conference Proceedings (OSTI)

A control system design method and concomitant control system comprising representing a physical apparatus to be controlled as a Hamiltonian system, determining elements of the Hamiltonian system representation which are power generators, power dissipators, and power storage devices, analyzing stability and performance of the Hamiltonian system based on the results of the determining step and determining necessary and sufficient conditions for stability of the Hamiltonian system, creating a stable control system based on the results of the analyzing step, and employing the resulting control system to control the physical apparatus.

Wilson, David G. (Tijeras, NM); Robinett, III, Rush D. (Tijeras, NM)

2012-02-21T23:59:59.000Z

86

Euclid File Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Request Form Euclid File Systems Euclid has 3 kinds of file systems available to users: home directories, scratch directories and project directories, all provided by the NERSC...

87

Underwater Glider System Study  

E-Print Network (OSTI)

Leonard, N. E. , ONR Underwater Glider Systems Study GliderDavis. The Autonomous Underwater Glider Spray. IEEE Journalto the ONR Committee for Underwater Glider Systems Study,

2003-01-01T23:59:59.000Z

88

Training Management System  

NLE Websites -- All DOE Office Websites (Extended Search)

Beam Time ESAF Contacts Calendars User Community Scientific Access Site AccessVisit Training Training Management System Argonne system used to track training requirements and...

89

NERSC File Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Systems Systems NERSC File Systems Overview NERSC file systems can be divided into two categories: local and global. Local file systems are only accessible on a single platform, providing best performance; global file systems are accessible on multiple platforms, simplifying data sharing between platforms. File systems are configured for different purposes. On each machine you have access to at least three different file system Home: Permanent, relatively small storage for data like source code, shell scripts, etc. that you want to keep. This file system is not tuned for high performance from parallel jobs. Referenced by the environment variable $HOME. Scratch: Large, high-performance file system. Place your large data files in this file system for capacity and capability computing. Data is

90

NREL: Energy Systems Integration - Energy Systems Integration...  

NLE Websites -- All DOE Office Websites (Extended Search)

and concentrating solar systems are tested. There is an emphasis on measurement of parabolic trough mirror panels. For detailed laboratory specifications, download the Optical...

91

PERFORMANCEMETRICS INTELLIGENT SYSTEMS ...  

Science Conference Proceedings (OSTI)

Page 1. PERMIS-2007 FOREWORD SPONSORS PerMIS 2008 PERFORMANCEMETRICS FOR INTELLIGENT SYSTEMS (PERMIS) ...

2010-11-12T23:59:59.000Z

92

PHOTOVOLTAIC SOLAR ELECTRIC SYSTEM  

E-Print Network (OSTI)

CALIFORNIA ENERGY COMMISSION Buying a PHOTOVOLTAIC SOLAR ELECTRIC SYSTEM A Consumer Guide 2003 System: A Consumer Guide i Buying a Photovoltaic Solar Electric System A Consumer Guide California Energy water system that uses the sun's energy to heat water, solar electric or photovoltaic technology uses

Krothapalli, Anjaneyulu

93

Quality System Documentation Management  

Science Conference Proceedings (OSTI)

Quality System Documentation Management. ... Minutes, summaries, or notes from Management Meetings of significance are archived here. ...

2012-08-21T23:59:59.000Z

94

Laboratory Management (Quality) Systems  

Science Conference Proceedings (OSTI)

Laboratory Management (Quality) Systems. NISTIR 7028 Type Evaluation Quality Manual Template. This NISTIR has been ...

2012-05-02T23:59:59.000Z

95

Medical imaging systems  

Science Conference Proceedings (OSTI)

A medical imaging system provides simultaneous rendering of visible light and diagnostic or functional images. The system may be portable, and may include adapters for connecting various light sources and cameras in open surgical environments or laparascopic or endoscopic environments. A user interface provides control over the functionality of the integrated imaging system. In one embodiment, the system provides a tool for surgical pathology.

Frangioni, John V

2013-06-25T23:59:59.000Z

96

Petascale system management experiences  

Science Conference Proceedings (OSTI)

Petascale HPC systems are among the largest systems in the world. Intrepid, one such system, is a 40,000 node, 556 teraflop Blue Gene/P system that has been deployed at Argonne National Laboratory. In this paper, we provide some background about the ...

Narayan Desai; Rick Bradshaw; Cory Lueninghoener; Andrew Cherry; Susan Coghlan; William Scullin

2008-11-01T23:59:59.000Z

97

Space System Architecture  

E-Print Network (OSTI)

Final Report of SSPARC: the Space Systems, Policy, and Architecture Research Consortium (Thrust II and III)

McManus, Dr. Hugh

98

Building the Senceive System  

Science Conference Proceedings (OSTI)

The conception and development of pervasive systems, i.e, the systems which will be used in pervasive computing environments, involve interdisciplinary team work. Apparently, the team consists of people with a diverse research background and expertise. ... Keywords: activity recognition, building a sensing system, complex system design, network configuration, project work, wireless sensor networks

Waltenegus Dargie; Alexander Schill

2009-05-01T23:59:59.000Z

99

Performance of Integrated Systems of Automated Roller Shade Systems...  

NLE Websites -- All DOE Office Websites (Extended Search)

032011 Keywords automated roller shade systems, daylight responsive dimming systems, daylighting, Integrated systems, photoelectric controls Abstract Daylight responsive...

100

Renovating Residential HVAC Systems HVAC Systems  

E-Print Network (OSTI)

- 1 - LBNL 57406 Renovating Residential HVAC Systems HVAC Systems J.A. McWilliams and I.S. Walker and Air Conditioning), and Stacy Hunt and Ananda Harzell (IBACOS). #12;- 3 - Renovating Residential HVAC Guideline for Residential HVAC Retrofits (http

Note: This page contains sample records for the topic "ized system distri" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Photovoltaic systems and applications  

DOE Green Energy (OSTI)

Abstracts are given of presentations given at a project review meeting held at Albuquerque, NM. The proceedings cover the past accomplishments and current activities of the Photovoltaic Systems Research, Balance-of-System Technology Development and System Application Experiments Projects at Sandia National Laboratories. The status of intermediate system application experiments and residential system analysis is emphasized. Some discussion of the future of the Photovoltaic Program in general, and the Sandia projects in particular is also presented.

Not Available

1982-01-01T23:59:59.000Z

102

Lighting Control Systems  

Science Conference Proceedings (OSTI)

The demand for lighting control systems in residential, commercial, and industrial facilities is on the rise with the demand for increased energy savings. With lighting accounting for almost 23% of grid load, there is significant opportunity to reduce lighting load while improving the quality of light for customers. Lighting control systems are becoming more intelligent as the need for them to interface with building control systems and demand response systems also increases. Lighting control systems use...

2009-12-17T23:59:59.000Z

103

AUTONOMOUS ROBOTIC INSPECTION EXPERIMENTAL SYSTEM  

Science Conference Proceedings (OSTI)

This document contains appendices on these topics: COMPUTERS AND CONTROLS; COMPUTER VISION SYSTEM; ELECTRICAL SYSTEMS; MECHANICAL SYSTEMS; ROBOTIC VEHICLE SYSTEMS; FIELD TRIALS.

David N. Rocheleau, Senior Investigator; Edward A. Hamilton, Associate Director, SCUREF; Jerry L. Hudgins, Senior Investigator; Paul McCarty, Graduate Research Assistant; Robert J. Schalkoff, Senior Investigator; Robert O. Pettus, Project Manager & Principal Investigator

1998-08-01T23:59:59.000Z

104

The Napier Type System  

E-Print Network (OSTI)

Persistent programming is concerned with the construction of large and long lived systems of data. In designing and building persistent object systems, we are attempting to regularise the activities that are performed on data by programming languages, operating systems, database management systems and file systems. We have identified the following areas of research which we are investigating in the context of persistent systems. They are: controlling complexity, protection of data, orthogonal persistence, controlled system evolution and concurrent computation. In this paper, we describe the data modelling facilities of the Napier type system. We also demonstrate the flexible and incremental nature of the type checking mechanism that is required for persistent programming. The type system is central to the nature of the Napier language and we will demonstrate how it has been designed to solve problems in the five areas identified above.

R. Morrison; A.L. Brown; R. Carrick; R.C.H. Connor; A. Dearle; M.P. Atkinson

1989-01-01T23:59:59.000Z

105

Modeling Power Systems as Complex Adaptive Systems  

Science Conference Proceedings (OSTI)

Physical analogs have shown considerable promise for understanding the behavior of complex adaptive systems, including macroeconomics, biological systems, social networks, and electric power markets. Many of today's most challenging technical and policy questions can be reduced to a distributed economic control problem. Indeed, economically based control of large-scale systems is founded on the conjecture that the price-based regulation (e.g., auctions, markets) results in an optimal allocation of resources and emergent optimal system control. This report explores the state-of-the-art physical analogs for understanding the behavior of some econophysical systems and deriving stable and robust control strategies for using them. We review and discuss applications of some analytic methods based on a thermodynamic metaphor, according to which the interplay between system entropy and conservation laws gives rise to intuitive and governing global properties of complex systems that cannot be otherwise understood. We apply these methods to the question of how power markets can be expected to behave under a variety of conditions.

Chassin, David P.; Malard, Joel M.; Posse, Christian; Gangopadhyaya, Asim; Lu, Ning; Katipamula, Srinivas; Mallow, J V.

2004-12-30T23:59:59.000Z

106

Environmental Management System  

NLE Websites -- All DOE Office Websites (Extended Search)

Management System Management System Environmental Management System An Environmental Management System is a systematic method for assessing mission activities, determining the environmental impacts of those activities, prioritizing improvements, and measuring results. May 30, 2012 The continuous improvement cycle Our Environmental Management System encourages continuous improvement of our environmental performance. Contact Environmental Communication & Public Involvement P.O. Box 1663 MS M996 Los Alamos, NM 87545 (505) 667-0216 Email Managing our effects on the environment We are committed to protecting the environment while conducting our national security and energy-related missions. Laboratory Environmental Governing Policy What is the Environmental Management System? It covers every program in the Laboratory

107

Verification of Adaptive Systems  

SciTech Connect

Adaptive systems are critical for future space and other unmanned and intelligent systems. Verification of these systems is also critical for their use in systems with potential harm to human life or with large financial investments. Due to their nondeterministic nature and extremely large state space, current methods for verification of software systems are not adequate to provide a high level of assurance for them. The combination of stabilization science, high performance computing simulations, compositional verification and traditional verification techniques, plus operational monitors, provides a complete approach to verification and deployment of adaptive systems that has not been used before. This paper gives an overview of this approach.

Pullum, Laura L [ORNL; Cui, Xiaohui [New York Institute of Technology (NYIT); Vassev, Emil [Lero The Irish Software Engineering Research Centre; Hinchey, Mike [Lero The Irish Software Engineering Research Centre; Rouff, Christopher [Lockheed Martin Corporation; Buskens, Richard [Lockheed Martin Corporation

2012-01-01T23:59:59.000Z

108

SUBSURFACE EMPLACEMENT TRANSPORTATION SYSTEM  

SciTech Connect

The objective of this analysis is to identify issues and criteria that apply to the design of the Subsurface Emplacement Transportation System (SET). The SET consists of the track used by the waste package handling equipment, the conductors and related equipment used to supply electrical power to that equipment, and the instrumentation and controls used to monitor and operate those track and power supply systems. Major considerations of this analysis include: (1) Operational life of the SET; (2) Geometric constraints on the track layout; (3) Operating loads on the track; (4) Environmentally induced loads on the track; (5) Power supply (electrification) requirements; and (6) Instrumentation and control requirements. This analysis will provide the basis for development of the system description document (SDD) for the SET. This analysis also defines the interfaces that need to be considered in the design of the SET. These interfaces include, but are not limited to, the following: (1) Waste handling building; (2) Monitored Geologic Repository (MGR) surface site layout; (3) Waste Emplacement System (WES); (4) Waste Retrieval System (WRS); (5) Ground Control System (GCS); (6) Ex-Container System (XCS); (7) Subsurface Electrical Distribution System (SED); (8) MGR Operations Monitoring and Control System (OMC); (9) Subsurface Facility System (SFS); (10) Subsurface Fire Protection System (SFR); (11) Performance Confirmation Emplacement Drift Monitoring System (PCM); and (12) Backfill Emplacement System (BES).

T. Wilson; R. Novotny

1999-11-22T23:59:59.000Z

109

Business System Planning Project System Requirements Specification  

SciTech Connect

The purpose of the Business Systems Planning Project System Requirements Specification (SRS) is to provide the outline and contents of the requirements for the CH2M HILL Hanford Group, Inc. (CHG) integrated business and technical information systems. The SRS will translate proposed objectives into the statement of the functions that are to be performed and data and information flows that they require. The requirements gathering methodology will use (1) facilitated group requirement sessions; (2) individual interviews; (3) surveys; and (4) document reviews. The requirements will be verified and validated through coordination of the technical requirement team and CHG Managers. The SRS document used the content and format specified in Lockheed Martin Services, Inc. Organization Standard Software Practices in conjunction with the Institute of Electrical and Electronics Engineers Standard 8340-1984 for Systems Requirements Documents.

NELSON, R.E.

2000-09-08T23:59:59.000Z

110

Standard-C hydrogen monitoring system, system design description  

DOE Green Energy (OSTI)

Standard-C cabinet arrangement system design description for the Standard Hydrogen Monitoring System.

Schneider, T.C., Westinghouse Hanford

1996-08-29T23:59:59.000Z

111

EPICS system: system structure and user interface  

SciTech Connect

This paper present the user's view of and the general organization of the EPICS control system at Fermilab. Various subsystems of the EPICS control system are discussed. These include the user command language, software protection, the device database, remote computer interfaces, and several application utilities. This paper is related to two other papers on EPICS: an overview paper and a detailed implementation paper.

West, R.E.; Bartlett, J.F.; Bobbitt, J.S.; Lahey, T.E.; Kramper, B.J.; MacKinnon, B.A.

1984-02-01T23:59:59.000Z

112

System Compatibility of Modern Lighting Control Systems  

Science Conference Proceedings (OSTI)

The state of the energy industry combined with growing economic pressures will drive accelerated use of energy-efficient dimmable lighting devices and control systems. While penetration and application will be different across customer sectors, the goal is to dynamically reduce lighting load without compromising productivity and the quality of light and life in a timely manner. Continual improvement of dimmable devices and controls is paramount to achieving that goal. EPRI research concepts in system com...

2011-10-11T23:59:59.000Z

113

Photovoltaic System Performance  

Energy.gov (U.S. Department of Energy (DOE))

Photovoltaic (PV) systems are usually composed of numerous solar arrays, which in turn, are composed of numerous PV cells. The performance of the system is therefore dependent on the performance of...

114

Stepping Motor Control System  

E-Print Network (OSTI)

This paper describes a hardware system designed to facilitate position and velocity control of a group of eight stepping motors using a PDP-11. The system includes motor driver cards and other interface cards in addition ...

Larson, Noble G.

115

Electricity Distribution System Workshop  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Discussion Summary Discussion Summary Electricity Transmission System Workshop 1 Grid Tech Team Discussion Summary Electricity Transmission System Workshop 2 Table of Contents INTRODUCTION ............................................................................................................................................. 3 EXECUTIVE SUMMARY .................................................................................................................................. 4 Process ...................................................................................................................................................... 4 Synthesized Challenges ............................................................................................................................. 5

116

Residential Geothermal Systems Credit  

Energy.gov (U.S. Department of Energy (DOE))

A resident individual taxpayer of Montana who installs a geothermal heating or cooling system in their principal dwelling can claim a tax credit based on the installation costs of the system, not...

117

Crowd-powered systems  

E-Print Network (OSTI)

Crowd-powered systems combine computation with human intelligence, drawn from large groups of people connecting and coordinating online. These hybrid systems enable applications and experiences that neither crowds nor ...

Bernstein, Michael Scott

2012-01-01T23:59:59.000Z

118

Urban organizational systems  

E-Print Network (OSTI)

General systems theory provides a conceptual framework for the integration of knowledge from a wide variety of specialized fields. Systems theory serves to synthesize, reconcile, and integrate knowledge making it possible ...

Morog, Joseph V

1981-01-01T23:59:59.000Z

119

Hybrid Systems Architectures  

E-Print Network (OSTI)

ion suppression of lower-level information not relevant for the current task Encapsulation (information hiding) implementation details are hidden, only interface information is visible F. Kurfe Hybrid System Architectures ASHS '96 37 Inheritance common characteristics are derived from ancestors Polymorphism appropriate instances of classes and operators can be selected at runtime Advantages ffl very flexible ffl suitable for large systems ffl support reuse Problems ffl handling of new and atypical situations ffl quite complex ffl formal verification F. Kurfe Hybrid System Architectures ASHS '96 38 Expert System What is an Expert System? Basic concepts ffl designer / user supplies facts and information ffl user asks queries and receives expert advice ffl limited to a problem domain (knowledge domain) Components ffl user interface ffl knowledge base ffl inference mechanism Synonyms: knowledge-based system, knowledge-based expert system F. Kurfe Hybrid System Archi...

Franz J. Kurfe

1996-01-01T23:59:59.000Z

120

Double Degenerate Binary Systems  

Science Conference Proceedings (OSTI)

In this study, angular momentum loss via gravitational radiation in double degenerate binary (DDB)systems (NS + NS, NS + WD, WD + WD, and AM CVn) is studied. Energy loss by gravitational waves has been estimated for each type of systems.

Yakut, K. [University of Ege, Department of Astronomy and Space Sciences, 35100-Izmir (Turkey)

2011-09-21T23:59:59.000Z

Note: This page contains sample records for the topic "ized system distri" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Transport in granular systems  

E-Print Network (OSTI)

There are many situations in which a continuum view of granular systems does not fully capture the relevant mechanics. In order for engineers to be able to design systems for transporting granular materials, there needs ...

Wendell, Dawn M. (Dawn Marie), 1983-

2011-01-01T23:59:59.000Z

122

Regimes in Simple Systems  

Science Conference Proceedings (OSTI)

Dynamical systems possessing regimes are identified with those where the state space possesses two or more regions such that transitions of the state from either region to the other are rare. Systems with regimes are compared to those where ...

Edward N. Lorenz

2006-08-01T23:59:59.000Z

123

IBM POWER7 systems  

Science Conference Proceedings (OSTI)

This paper describes the system architectures and designs of the IBM POWER7 servers. From the smallest single-processor socket blade to the largest 32-processor-socket 256-core enterprise rack server, each system is designed to fully ...

R. X. Arroyo; R. J. Harrington; S. P. Hartman; T. Nguyen

2011-05-01T23:59:59.000Z

124

Absorption heat pump system  

DOE Patents (OSTI)

The efficiency of an absorption heat pump system is improved by conducting liquid from a second stage evaporator thereof to an auxiliary heat exchanger positioned downstream of a primary heat exchanger in the desorber of the system.

Grossman, Gershon (Oak Ridge, TN)

1984-01-01T23:59:59.000Z

125

Absorption heat pump system  

DOE Patents (OSTI)

The efficiency of an absorption heat pump system is improved by conducting liquid from a second stage evaporator thereof to an auxiliary heat exchanger positioned downstream of a primary heat exchanger in the desorber of the system.

Grossman, G.

1982-06-16T23:59:59.000Z

126

Routing Policy System Replication  

Science Conference Proceedings (OSTI)

The RIPE database specifications and RPSL define languages used as the basis for representing information in a routing policy system. A repository for routing policy system information is known as a routing registry. A routing registry provides a means ...

C. Villamizar; C. Alaettinoglu; R. Govindan; D. Meyer

2000-02-01T23:59:59.000Z

127

Energy Basics: Photovoltaic Systems  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

an entire PV system. This system is usually everything needed to meet a particular energy demand, such as powering a water pump, the appliances and lights in a home, or-if the...

128

Hanford System Overview  

CHG0612-16.0 CH2M-32399-VA Hanford System Overview Hanford System Overview January 23-24, 2007 Paul Certa Tom Crawford Aluminum and Chromium Leaching for

129

Small Modular Biomass Systems  

DOE Green Energy (OSTI)

Fact sheet that provides an introduction to small modular biomass systems. These systems can help supply electricity to rural areas, businesses, and people without power. They use locally available biomass fuels such as wood, crop waste, and animal manures.

Not Available

2002-12-01T23:59:59.000Z

130

Energy Basics: Photovoltaic Systems  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Energy Basics Renewable Energy Printable Version Share this resource Biomass Geothermal Hydrogen Hydropower Ocean Solar Photovoltaics Cells Systems Concentrating Solar...

131

New electrochromic mirror systems  

New electrochromic mirror systems ... recorded using a fiber optic spectrometer (Ocean Optics). ... transmittance modulation of infrared light could lead

132

Microfluidic Partitioning System  

home \\ technologies \\ microfluidic partitioning system. Technologies: Ready-to-Sign Licenses: ... for the Department of Energy's National Nuclear Security Administration

133

Monitoring System Performance (Presentation)  

DOE Green Energy (OSTI)

Requirements for a standard test to rate the durability of photovoltaic (PV) modules at system voltage are discussed.

Emery, K.; Smith, R.

2011-02-01T23:59:59.000Z

134

Information Systems Group Homepage  

Science Conference Proceedings (OSTI)

... computational methods, data/knowledge mining tools, and semantic services using systems-based approaches, to advance measurement science ...

2012-06-26T23:59:59.000Z

135

Lithium battery management system  

SciTech Connect

Provided is a system for managing a lithium battery system having a plurality of cells. The battery system comprises a variable-resistance element electrically connected to a cell and located proximate a portion of the cell; and a device for determining, utilizing the variable-resistance element, whether the temperature of the cell has exceeded a predetermined threshold. A method of managing the temperature of a lithium battery system is also included.

Dougherty, Thomas J. (Waukesha, WI)

2012-05-08T23:59:59.000Z

136

Distribution System Losses Evaluation  

Science Conference Proceedings (OSTI)

Currently, there is not an industry standard on how utilities calculate and account for electrical losses and reductions in electric system losses. Computer models used to analyze power flows typically only include the primary components of the distribution system infrastructure. More detailed electric system models can benefit utilities by providing more accurate loss calculations as well as benefits for system planning and engineering. The utility industry could benefit from having a consistent and uni...

2008-12-16T23:59:59.000Z

137

Interactive Intelligent Systems  

Science Conference Proceedings (OSTI)

... in applying interactive system utility measurements against some hard problems in both the intelligence community (IC) and the military (DARPA). ...

2011-09-08T23:59:59.000Z

138

CSRC - Systems Administration  

Science Conference Proceedings (OSTI)

... The intended audience is composed of Windows 2000 Systems Administrators and technical Windows 2000 Professional users working in ...

139

Fuel washout detection system  

DOE Patents (OSTI)

A system for detecting grossly failed reactor fuel by detection of particulate matter as accumulated on a filter.

Colburn, Richard P. (Pasco, WA)

1985-01-01T23:59:59.000Z

140

DOE Systems Engineering Methodology  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Computer System Retirement Guidelines Computer System Retirement Guidelines Version 3 September 2002 U.S. Department of Energy Office of the Chief Information Officer Computer System Retirement Guidelines Date: September 2002 Page 1 Rev Date: Table of Contents Section Page Purpose ............................................................................................................................................ 2 Initiation and Distribution ............................................................................................................... 2 Resource .......................................................................................................................................... 2 General Information ........................................................................................................................

Note: This page contains sample records for the topic "ized system distri" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

UML for systems engineering  

Science Conference Proceedings (OSTI)

The paper provides an introduction to the employment of Unified Modeling Language (UML) in systems engineering. The standard being developed for this purpose is the Systems Modeling Language (SysML) specification. This paper, while not dealing with SysML ... Keywords: DoDAF, Software engineering, SysML, Systems engineering, UML

Brian Willard

2007-01-01T23:59:59.000Z

142

Recommender systems survey  

Science Conference Proceedings (OSTI)

Recommender systems have developed in parallel with the web. They were initially based on demographic, content-based and collaborative filtering. Currently, these systems are incorporating social information. In the future, they will use implicit, local ... Keywords: Cold-start, Collaborative filtering, Evaluation metrics, Hybrid, Internet of things, Prediction, Recommendation, Recommender systems, Similarity measures, Social

J. Bobadilla, F. Ortega, A. Hernando, A. GutiRrez

2013-07-01T23:59:59.000Z

143

Modular Integrated Energy Systems  

E-Print Network (OSTI)

system (or CHP -- Cooling, Heat and Power) system at Ft. Bragg. Much of this work is funded by the U consists of a gas turbine-generator, a heat recovery steam generator, and a waste heat fired absorption-driven absorption chiller, · Install and monitor the performance of a prototype IES modular system employing

Oak Ridge National Laboratory

144

CMS System Security Plan Procedure  

Science Conference Proceedings (OSTI)

... TASK 5: SYSTEM DECOMMISSION. ... BPSSM Business Partners Systems Security Manual. ... of Information Technology, Policy, Procedures, & Audits. ...

2009-06-30T23:59:59.000Z

145

NIST Intranet Quality System Links  

Science Conference Proceedings (OSTI)

Safety. Environmental Management System. NIST Quality System Resources. Assessor Resources. MSAG Website. Dates and Deadlines. ...

2012-08-21T23:59:59.000Z

146

Match Pumps to System Requirements  

SciTech Connect

BestPractices Program tip sheet discussing pumping system efficiency matching pumps to system requirements

2005-10-01T23:59:59.000Z

147

Distribution System Research Priorities  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Mark McGranaghan Mark McGranaghan EPRI ELECTRICITY DISTRIBUTION SYSTEM WORKSHOP Crystal City, VA September 24, 2012 Distribution System Research Priorities 2 © 2012 Electric Power Research Institute, Inc. All rights reserved. The Power System Roadmaps start with a Vision Future Power System will require new technologies, infrastructure, and control systems 3 © 2012 Electric Power Research Institute, Inc. All rights reserved. R&D Roadmaps - Coordination is Critical Roadmaps are living documents 4 © 2012 Electric Power Research Institute, Inc. All rights reserved. Developing the next generation grid * Industry needs new technologies, communication protocols, and information management methods - More variable generation sources and controllable loads - Aging infrastructure

148

Intelligent Car System  

E-Print Network (OSTI)

In modern life the road safety has becomes the core issue. One single move of a driver can cause horrifying accident. The main goal of intelligent car system is to make communication with other cars on the road. The system is able to control to speed, direction and the distance between the cars the intelligent car system is able to recognize traffic light and is able to take decision according to it. This paper presents a framework of the intelligent car system. I validate several aspect of our system using simulation.

Siddique, Qasim

2012-01-01T23:59:59.000Z

149

Massively parallel computing system  

DOE Patents (OSTI)

A parallel computing system and method having improved performance where a program is concurrently run on a plurality of nodes for reducing total processing time, each node having a processor, a memory, and a predetermined number of communication channels connected to the node and independently connected directly to other nodes. The present invention improves performance of the parallel computing system by providing a system which can provide efficient communication between the processors and between the system and input and output devices. A method is also disclosed which can locate defective nodes with the computing system.

Benner, R.E.; Gustafson, J.L.; Montry, G.R.

1989-03-01T23:59:59.000Z

150

Business System Planning Project, Preliminary System Design  

SciTech Connect

CH2M HILL Hanford Group, Inc. (CHG) is currently performing many core business functions including, but not limited to, work control, planning, scheduling, cost estimating, procurement, training, and human resources. Other core business functions are managed by or dependent on Project Hanford Management Contractors including, but not limited to, payroll, benefits and pension administration, inventory control, accounts payable, and records management. In addition, CHG has business relationships with its parent company CH2M HILL, U.S. Department of Energy, Office of River Protection and other River Protection Project contractors, government agencies, and vendors. The Business Systems Planning (BSP) Project, under the sponsorship of the CH2M HILL Hanford Group, Inc. Chief Information Officer (CIO), have recommended information system solutions that will support CHG business areas. The Preliminary System Design was developed using the recommendations from the Alternatives Analysis, RPP-6499, Rev 0 and will become the design base for any follow-on implementation projects. The Preliminary System Design will present a high-level system design, providing a high-level overview of the Commercial-Off-The-Shelf (COTS) modules and identify internal and external relationships. This document will not define data structures, user interface components (screens, reports, menus, etc.), business rules or processes. These in-depth activities will be accomplished at implementation planning time.

EVOSEVICH, S.

2000-10-30T23:59:59.000Z

151

Cross Layer Dynamic Resource Allocation with Targeted Throughput for WCDMA Data  

E-Print Network (OSTI)

aggregate utility subject to transmission power and rateaggregate utility subject to transmission power and rateto equal- ize rates but to maximize utility based on target

Zhang, Peifang; Jordan, Scott

2008-01-01T23:59:59.000Z

152

Tobacco Control in Transition: Public Support and Governmental Disarray in Arizona 1997-2007  

E-Print Network (OSTI)

Dealing with the Arizona Restaurant and HospitalityMJ, Ramirez C. "State Restaurant Group Backs Prop. 201'swould hurt bars and restaurants would "Mesa-ize" Arizona

Hendlin M.Sc., Yogi H.; Barnes, Richard L JD; Glantz, Stanton A. Ph.D.

2008-01-01T23:59:59.000Z

153

JOURNAL DE PHYSIQUE CoZZoque C4, suppZe'ment au nOIO, Tome 42, octobre 1981 page C4-475  

E-Print Network (OSTI)

con- ELECTRC~N E N E R G ~ ~ ~ V ) ditions -of the a-SiH, surface ;sp~lttercleaned (A), oxid- ized (B

Paris-Sud XI, Université de

154

On Penalty and Gap Function Methods for Bilevel Equilibrium ...  

E-Print Network (OSTI)

ized gap function has been introduced by Fukushima and Taji in [23] for variational inequalities, and extended by Mastroeni in [16] to equilibrium problems.

155

Environmental controls on the photosynthesis and respiration of a boreal lichen woodland: a growing season of whole-ecosystem exchange measurements by eddy correlation  

E-Print Network (OSTI)

on the woodland: and photosynthesis a exchange growingmechanistic model of forest photosynthesis, parameter- izedThe response of leaf photosynthesis to the physical environ-

1995-01-01T23:59:59.000Z

156

2003AugustMFGS&TNews  

NLE Websites -- All DOE Office Websites (Extended Search)

High speed machining of mold for Monolithic Ballasted Penetrator degree-of-freedom manipulator, special- ized sensors and tooling, a mounting table and part trays enclosed in a...

157

Turbine power plant system  

SciTech Connect

A turbine power plant system consisting of three sub-systems; a gas turbine sub-system, an exhaust turbine sub-system, and a steam turbine sub-system. The three turbine sub-systems use one external fuel source which is used to drive the turbine of the gas turbine sub-system. Hot exhaust fluid from the gas turbine sub-system is used to drive the turbines of the exhaust turbine sub-system and heat energy from the combustion chamber of the gas turbine sub-system is used to drive the turbine of the steam turbine sub-system. Each sub-system has a generator. In the gas turbine sub-system, air flows through several compressors and a combustion chamber and drives the gas turbine. In the exhaust turbine sub-system, hot exhaust fluid from the gas turbine sub-system flows into the second passageway arrangement of first and fourth heat exchangers and thus transfering the heat energy to the first passageway arrangement of the first and fourth heat exchangers which are connected to the inlets of first and second turbines, thus driving them. Each turbine has its own closed loop fluid cycle which consists of the turbine and three heat exchangers and which uses a fluid which boils at low temperatures. A cooler is connected to a corresponding compressor which forms another closed loop system and is used to cool the exhaust fluid from each of the two above mentioned turbines. In the steam turbine sub-system, hot fluid is used to drive the steam turbine and then it flows through a fluid duct, to a first compressor, the first fluid passageway arrangement of first and second heat exchangers, the second passageway of the first heat exchanger, the combustion chamber of the gas turbine where it receives heat energy, and then finally to the inlet of the steam turbine, all in one closed loop fluid cycle. A cooler is connected to the second passageway of the second heat exchanger in a closed loop fluid cycle, which is used to cool the turbine exhaust.

Papastavros, D.

1985-03-05T23:59:59.000Z

158

NSLS Computer Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Computer Systems Computer Systems Micro Systems WorkStation Applications Network Configuration Documents The National Synchrotron Light Source facility at the Brookhaven National Laboratory in New York, consists of two storage rings, one for VUV operating at 800 Mev and one for XRAY at 2.8 Gev and a common injection system comprised of a linear accelerator and a Booster ring. Hardware Architecture The hardware architecture of the present control system follows the current trend seen in many accelerator facilities. It is a two-level distributed system consisting of HP/900 series workstations connected by the standard ethernet to VME-based microprocessor subsystems. All the workstations have local disk and sufficient memory for fast response. Workstations are used as file server, back-up file server and for program development and other

159

NEWTON's Metric System Resources  

NLE Websites -- All DOE Office Websites (Extended Search)

Please select any link below. Search this page, using your web browser's search function. Please select any link below. Search this page, using your web browser's search function. Metric System References Do you have a great metric reference link? Please click our Ideas page. Featured Reference Links: Metric (SI) References Metric (SI) References Having trouble with the metric system? Visit the National Institute of Standards and Technology's site about the rules and style conventions of the International System of Units (SI). The Metric System The Metric System Need another reference? Try this site provided by Wikipedia that discusses the metric system and its history in depth. Metric Converter Metric Converter Need to convert to Metric? OnlineConversion.com allows you to convert just about anything to just about anything else. This will let you easily from metric to US Standard notation, and vice versa.

160

Quality monitored distributed voting system  

DOE Patents (OSTI)

A quality monitoring system can detect certain system faults and fraud attempts in a distributed voting system. The system uses decoy voters to cast predetermined check ballots. Absent check ballots can indicate system faults. Altered check ballots can indicate attempts at counterfeiting votes. The system can also cast check ballots at predetermined times to provide another check on the distributed voting system. 6 figs.

Skogmo, D.

1997-03-18T23:59:59.000Z

Note: This page contains sample records for the topic "ized system distri" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Building America System Research  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Building America System Building America System Research Eric Werling, DOE Ren Anderson, NREL eric.werling@ee.doe.gov, 202-586-0410 ren.anderson@nrel.gov, 303-384-7443 April 2, 2013 Building America System Innovations: Accelerating Innovation in Home Energy Savings 2 | Program Name or Ancillary Text eere.energy.gov Project Relevance 3 | Building Technologies Office eere.energy.gov Building America Fills Market Need for a High-Performance Homes HUB of Innovation

162

System and Network Management  

Science Conference Proceedings (OSTI)

This document covers Systems and Network Management Requirements and is the first deliverable in a joint EPRI and Utility User Project to develop Network Management capability for Electric Utility Automation Systems (UAS) using international communication standards such as IEC 61850. The management of substation automation systems is critical since tools are now based, for the most part, on proprietary hardware and software. In modern state-of-the art substations, traditional network management has ...

2012-12-20T23:59:59.000Z

163

Multizone infiltration monitoring system  

DOE Green Energy (OSTI)

A multizone infiltration monitoring system (MIMS) using a single tracer gas has been developed. MIMS measures zonal infiltration and exfiltration as well as interzonal air movement rates. The system has been used at the 4-zone test house at the SERI interim field site, and this paper presents preliminary results. The present system can determine zonal infiltration rates, and the results show significant differences in infiltration rates for the various zones.

Wortman, D.N.; Burch, J.; Judkoff, R.

1982-06-01T23:59:59.000Z

164

Plasmatron-catalyst system  

DOE Patents (OSTI)

A plasmatron-catalyst system. The system generates hydrogen-rich gas and comprises a plasmatron and at least one catalyst for receiving an output from the plasmatron to produce hydrogen-rich gas. In a preferred embodiment, the plasmatron receives as an input air, fuel and water/steam for use in the reforming process. The system increases the hydrogen yield and decreases the amount of carbon monoxide.

Bromberg, Leslie (Sharon, MA); Cohn, Daniel R. (Chestnut Hill, MA); Rabinovich, Alexander (Swampscott, MA); Alexeev, Nikolai (Moscow, RU)

2007-10-09T23:59:59.000Z

165

Scalable autonic processing systems  

Science Conference Proceedings (OSTI)

The number of automotive functions that are controlled by computers is rapidly increasing. In the past, these functions were confined to stand-alone control units, such as the engine or ABS brake controller. In modern cars, the data exchange between ... Keywords: autonic systems, distributed processing and real-time systems, event-triggered, fault tolerance, parallel processing, scalable automotive electronics system, time-triggered, vehicle electronics

Adnan Shaout; Najamuz Zaman; Taisir Eldos

2003-07-01T23:59:59.000Z

166

Transient data recorder systems  

DOE Patents (OSTI)

Transient data recorder systems including a high speed charge coupled device and a device exerciser, including a high speed sampler and driver circuitry.

Linnenbrink, Thomas E. (Winnetka, IL); Gradl, David A. (Des Plaines, IL)

1982-01-01T23:59:59.000Z

167

Norcal Waste Systems, Inc.  

SciTech Connect

Fact sheet describes the LNG long-haul heavy-duty trucks at Norcal Waste Systems Inc.'s Sanitary Fill Company.

Not Available

2002-12-01T23:59:59.000Z

168

System Benefits Charge  

Energy.gov (U.S. Department of Energy (DOE))

New York's system benefits charge (SBC), established in 1996 by the New York Public Service Commission (PSC), supports energy efficiency, education and outreach, research and development, and low...

169

Intelligent Systems Division Homepage  

Science Conference Proceedings (OSTI)

... the versatility, autonomy, and rapid re-tasking of intelligent robots and automation technologies for smart manufacturing and cyber-physical systems ...

2013-08-06T23:59:59.000Z

170

Energy Information Systems website  

NLE Websites -- All DOE Office Websites (Extended Search)

and visualize the energy use of their buildings. Please visit the recently updated Energy Information System website for EETD research papers, case studies, and a download...

171

Nuclear Energy Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Role of Synchrotron Radiation in Solving Scientific Challenges in Advanced Nuclear Energy Systems 27 to 28 January 2010 at Argonne's Advanced Photon Source Scope Third-generation...

172

Radioisotope Power Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

into finished metal shapes by extrusion, rolling, forming, machining, assembly, and welding. Nondestructive testing and quality systems are employed throughout the process to...

173

Technology reviews: Lighting systems  

SciTech Connect

We present a representative review of existing, emerging, and future technology options in each of five hardware and systems areas in envelope and lighting technologies: lighting systems, glazing systems, shading systems, daylighting optical systems, and dynamic curtain wall systems. The term technology is used here to describe any design choice for energy efficiency, ranging from individual components to more complex systems to general design strategies. The purpose of this task is to characterize lighting system in the state of the art in envelope and lighting technologies in order to identify those with promise for advanced integrated systems, with an emphasis on California commercial buildings. For each technology category, the following activities have been attempted to the extent possible: Identify key performance characteristics and criteria for each technology. Determine the performance range of available technologies. Identify the most promising technologies and promising trends in technology advances. Examine market forces and market trends. Develop a continuously growing in-house database to be used throughout the project. A variety of information sources have been used in these technology characterizations, including miscellaneous periodicals, manufacturer catalogs and cut sheets, other research documents, and data from previous computer simulations. We include these different sources in order to best show the type and variety of data available, however publication here does not imply our guarantee of these data. Within each category, several broad classes are identified, and within each class we examine the generic individual technologies that fall into that class.

Schuman, J.; Rubinstein, F.; Papamichael, K.; Beltran, L.; Lee, E.S.; Selkowitz, S.

1992-09-01T23:59:59.000Z

174

Benchmark Monitoring: Retired Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Completed Batch Jobs Completed Parallel Jobs Usage Reports Hopper Benchmark Monitoring Edison Benchmark Monitoring Carver Benchmark Monitoring Benchmark Monitoring: Retired Systems...

175

Edison Systems Technology Documentation  

NLE Websites -- All DOE Office Websites (Extended Search)

Technology Documentation Systems Technology Documentation Downloads CrayXC30Networking.pdf | Adobe Acrobat PDF file Cray XC30 Networking SonexionBrochure.pdf | Adobe Acrobat PDF...

176

Blast Effects Suppression System  

The HydroSuppressor system was developed to protect critical facilities from the devastating effects of blast from a vehicle bomb. HydroSuppressor ...

177

Remote Systems Design & Deployment  

Science Conference Proceedings (OSTI)

The Pacific Northwest National Laboratory (PNNL) was tasked by Washington River Protection Solutions, LLC (WRPS) to provide information and lessons learned relating to the design, development and deployment of remote systems, particularly remote arm/manipulator systems. This report reflects PNNLs experience with remote systems and lays out the most important activities that need to be completed to successfully design, build, deploy and operate remote systems in radioactive and chemically contaminated environments. It also contains lessons learned from PNNLs work experiences, and the work of others in the national laboratory complex.

Bailey, Sharon A.; Baker, Carl P.; Valdez, Patrick LJ

2009-08-28T23:59:59.000Z

178

The Epicure Control System  

SciTech Connect

The Epicure Control System supports the Fermilab fixed target physics program. The system is distributed across a network of many different types of components. The use of multiple layers on interfaces for communication between logical tasks fits the client-server model. Physical devices are read and controlled using symbolic references entered into a database with an editor utility. The database system consists of a central portion containing all device information and optimized portions distributed among many nodes. Updates to the database are available throughout the system within minutes after being requested.

Dambik, E.; Kline, D.; West, R.

1993-09-01T23:59:59.000Z

179

Intelligent Transport Systems  

E-Print Network (OSTI)

in Sustainable Urban Transport: City Interview Synthesis (of Leeds, Institute for Transport Studies, forthcoming.I NTELLIGENT TRANSPORT SYSTEMS LINKING TECHNOLOGY AND

Deakin, Elizabeth; Frick, Karen Trapenberg; Skabardonis, Alexander

2009-01-01T23:59:59.000Z

180

FCT Systems Analysis: Contacts  

NLE Websites -- All DOE Office Websites (Extended Search)

Systems Analysis: Contacts on AddThis.com... Home Analysis Methodologies DOE H2A Analysis Scenario Analysis Quick Links Hydrogen Production Hydrogen Delivery Hydrogen Storage Fuel...

Note: This page contains sample records for the topic "ized system distri" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Energy Basics: Heating Systems  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

of energy sources, including electricity, boilers, solar energy, and wood and pellet-fuel heating. Small Space Heaters Used when the main heating system is inadequate or when...

182

Laundry heat recovery system  

SciTech Connect

A laundry heat recovery system includes a heat exchanger associated with each dryer in the system, the heat exchanger being positioned within the exhaust system of the dryer. A controller responsive to the water temperature of the heat exchangers and the water storage for the washer selectively circulates the water through a closed loop system whereby the water within the exchangers is preheated by the associated dryers. By venting the exhaust air through the heat exchanger, the air is dehumidified to permit recirculation of the heated air into the dryer.

Alio, P.

1985-04-09T23:59:59.000Z

183

Solar powered desalination system  

E-Print Network (OSTI)

Fundamentals of Salt Water Desalination. New York: Elsevier,7. Lightbucket. Large scale desalination: is there enoughSystem for Seawater Desalination Plants. The Netherlands:

Mateo, Tiffany Alisa

2011-01-01T23:59:59.000Z

184

Precision volume measurement system.  

Science Conference Proceedings (OSTI)

A new precision volume measurement system based on a Kansas City Plant (KCP) design was built to support the volume measurement needs of the Gas Transfer Systems (GTS) department at Sandia National Labs (SNL) in California. An engineering study was undertaken to verify or refute KCP's claims of 0.5% accuracy. The study assesses the accuracy and precision of the system. The system uses the ideal gas law and precise pressure measurements (of low-pressure helium) in a temperature and computer controlled environment to ratio a known volume to an unknown volume.

Fischer, Erin E.; Shugard, Andrew D.

2004-11-01T23:59:59.000Z

185

Next generation CAT system  

E-Print Network (OSTI)

Two novel techniques for future CAT system are presented. Transmission descattering is a singleshot method to differentiate unscattered and scattered components of light transmission through a scattering material. ...

Kim, Jaewon, S.M. Massachusetts Institute of Technology

2010-01-01T23:59:59.000Z

186

Lighting Systems Test Facilities  

NLE Websites -- All DOE Office Websites (Extended Search)

Measurement equipment with light beam Lighting Systems Test Facilities NOTICE Due to the current lapse of federal funding, Berkeley Lab websites are accessible, but may not be...

187

Genomics and Systems Biology  

NLE Websites -- All DOE Office Websites (Extended Search)

such as energy, agriculture, and environmental cleanup. Get Expertise Babetta Marrone Biofuels Program Manager Email Cheryl Kuske DOE BER Biological System Science Division...

188

Infrared Thermography Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

funds for Fiscal Year 2014. Title Infrared Thermography Systems Publication Type Book Chapter LBNL Report Number LBNL-46590 Year of Publication 2000 Authors Griffith, Brent...

189

Toyota production system.  

E-Print Network (OSTI)

??Background: There are various manufacturing methods and systems in automobile industries throughout the world. Of these, many practice lean manufacturing methods. The most effective and (more)

Vyas, Kewalkumar Chandrakant

2011-01-01T23:59:59.000Z

190

Deepwater drilling riser system  

Science Conference Proceedings (OSTI)

The principal focus of this paper is to discuss and summarize, from the manufacturer's perspective, the primary milestones in the development of the marine riser system used to drill in record water depths off the U.S. east coast. This riser system is unique in that it used advanced designs, material technology, and quality control to enable safe operation in water depths beyond the capability of conventional drilling riser systems. Experience and research have led to design improvements that are now being incorporated in new riser systems that have the potential of expanding the frontiers to increasingly deeper water.

Chastain, T.; Stone, D.

1986-08-01T23:59:59.000Z

191

Energy Management Systems  

E-Print Network (OSTI)

This presentation will address results from a pilot project with 10 chemical plants on energy management systems and the development of an energy efficiency plant certification program.

Ferland, K.

2007-01-01T23:59:59.000Z

192

Genomics and Systems Biology  

NLE Websites -- All DOE Office Websites (Extended Search)

Genomics and Systems Biology LANL leads the world in computational finishing of microbial genomes Read caption + In 2013, Los Alamos scientist Richard Sayre and his team...

193

Bearing Material Systems  

Science Conference Proceedings (OSTI)

Table 2   Single-metal bearing material systems...Bronze C C C D B 14 2 Electric motor bushings, home appliance bearings,

194

Manufacturing Systems Integration News  

Science Conference Proceedings (OSTI)

... NIST Cooperative Agreement with University of Maryland Supports Research on 21st Century Smart Systems Release Date: 10/13/2011 ...

2011-12-01T23:59:59.000Z

195

NREL: Systems Engineering - Workshops  

NLE Websites -- All DOE Office Websites (Extended Search)

Workshops The Wind Energy Systems Engineering Workshop is a biennial workshop that invites speakers from academia, industry, and international research laboratories to discuss...

196

Lighting Group: Controls: Systems Integration  

NLE Websites -- All DOE Office Websites (Extended Search)

Systems Integration Building Control Systems Integration Objective This research project investigates how diverse building control systems can be integrated to provide seamless...

197

Vehicle Technologies Office: Battery Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Battery Systems to someone by E-mail Share Vehicle Technologies Office: Battery Systems on Facebook Tweet about Vehicle Technologies Office: Battery Systems on Twitter Bookmark...

198

ESP: A system utilization benchmark  

E-Print Network (OSTI)

ESP: A System Utilization Benchmark Adrian T. Wong, LeonidEffective System Performance (ESP) test, which is designedEffective System Performance (ESP) benchmark, which measures

Wong, Adrian T.; Oliker, Leonid; Kramer, William T.C.; Kaltz, Teresa L.; Bailey, David H.

2000-01-01T23:59:59.000Z

199

Advanced Manufacturing Office: Pump Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Pump Systems on Twitter Bookmark Advanced Manufacturing Office: Pump Systems on Google Bookmark Advanced Manufacturing Office: Pump Systems on Delicious Rank Advanced...

200

Could the Work System Method Embrace Systems Concepts More Fully?  

Science Conference Proceedings (OSTI)

The work system method was developed iteratively with the overarching goal of helping business professionals understand IT-reliant systems in organizations. It uses general systems concepts selectively, and sometimes implicitly. For example, a work system ...

Steven Alter

2007-04-01T23:59:59.000Z

Note: This page contains sample records for the topic "ized system distri" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Monitoring system-of-systems requirements in multi product lines  

Science Conference Proceedings (OSTI)

[Context and motivation] Large-scale software-intensive systems are often considered as systems of systems comprising several interrelated product lines from which system variants are derived to meet the overall requirements. [Question/problem] ...

Thomas Klambauer, Gerald Holl, Paul Grnbacher

2013-04-01T23:59:59.000Z

202

Large File System Backup: NERSC Global File System Experience  

E-Print Network (OSTI)

Large File System Backup NERSC Global File System ExperienceNational Laboratory Abstract NERSCs Global File system (from all compute systems at NERSC, holds files and data from

Mokhtarani, Akbar

2008-01-01T23:59:59.000Z

203

PIA - Human Resources System/Payroll System | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

System PIA - Human Resources - Personal Information Change Request - Idaho National Engineering Laboratory PIA - INL SECURITY INFORMATION MANAGEMENT SYSTEM BUSINESS ENCLAVE...

204

NETL: Gasification Systems - Syngas Processing Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Syngas Processing Systems Syngas Processing Systems Gasification Systems Syngas Processing Systems The various downstream uses of syngas require that most of the contaminants present in raw syngas be removed to very low levels prior to use. Many of these contaminants can contribute to erosion, corrosion, and loss of strength in gas turbine components, and can act as poisons to the catalysts often used in syngas conversion and utilization processes. These same contaminants include or result in regulated air pollutants such as SOx, NOx, particulates, and mercury and other trace metals, which must be removed to increasingly low levels to meet stringent regulatory limits on air emissions. Conventional methods for removing sulfur and other contaminants from syngas typically rely on chemical or physical absorption processes operating at low temperatures. However, after contaminant removal, the gas has to be reheated prior to its use in a gas turbine or other chemical synthesis process; in the case of downstream hydrogen production, additional steam needs to be added back to the syngas. These process swings adversely impact the plant's thermal efficiency and cost. Techno-economic analysis shows that gas-cleaning processes amenable to higher operating temperatures could significantly reduce this efficiency loss and improve the gasification plant's commercial viability. It is also critical that, while improving efficiency and reducing cost, the gas cleaning removes a wide variety of coal contaminants (including hydrogen sulfide, ammonia, hydrogen chloride, and carbonyl sulfide, as well as various forms of trace metals, including arsenic, mercury, selenium, and cadmium) to extremely low levels. Accordingly, the R&D approach in this area focuses on the development of high-efficiency processes that operate at moderate to high temperatures and provide multi-contaminant control to meet the highest environmental standards.

205

Type systems for dummies  

Science Conference Proceedings (OSTI)

We extend Pure Type Systems with a function turning each term M of type A into a dummy |M| of the same type (|.| is not an identity, in that M ? |M|). Intuitively, a dummy represents an unknown, canonical object of the given type: dummies are opaque ... Keywords: canonical element, proof irrelevance, pure type system

Andrea Asperti; Ferruccio Guidi

2012-01-01T23:59:59.000Z

206

Fault-Tolerant Systems  

Science Conference Proceedings (OSTI)

There are many applications in which the reliability of the overall system must be far higher than the reliability of its individual components. In such cases, designers devise mechanisms and architectures that allow the system to either completely mask ... Keywords: Computer Architecture

Israel Koren; C. Mani Krishna

2007-03-01T23:59:59.000Z

207

Technology reviews: Shading systems  

SciTech Connect

We present a representative review of existing, emerging, and future technology options in each of five hardware and systems areas in envelope and lighting technologies: lighting systems, glazing systems, shading systems, daylighting optical systems, and dynamic curtain wall systems. The term technology is used here to describe any design choice for energy efficiency, ranging from individual components to more complex systems to general design strategies. The purpose of this task is to characterize the state of the art in envelope and lighting technologies in order to identify those with promise for advanced integrated systems, with an emphasis on California commercial buildings. For each technology category, the following activities have been attempted to the extent possible: Identify key performance characteristics and criteria for each technology. Determine the performance range of available technologies. Identify the most promising technologies and promising trends in technology advances. Examine market forces and market trends. Develop a continuously growing in-house database to be used throughout the project. A variety of information sources have been used in these technology characterizations, including miscellaneous periodicals, manufacturer catalogs and cut sheets, other research documents, and data from previous computer simulations. We include these different sources in order to best show the type and variety of data available, however publication here does not imply our guarantee of these data. Within each category, several broad classes are identified, and within each class we examine the generic individual technologies that fall into that class.

Schuman, J.; Rubinstein, F.; Papamichael, K.; Beltran, L.; Lee, E.S.; Selkowitz, S.

1992-09-01T23:59:59.000Z

208

Packaged CHP System Assessment  

Science Conference Proceedings (OSTI)

The Packaged CHP System Assessment report provides an analysis of packaged combined heat and power (CHP) systems. The report summarizes and compares the technical characteristics of commercial product lines with electric power output up to 3,000 kWe.

2004-03-22T23:59:59.000Z

209

Video communications system  

DOE Patents (OSTI)

A video communications system having at least one command network formed by a combination of subsystems to include a video subsystem, an audio subsystem, a communications subsystem, and a control subsystem. The video communications system to be window driven and mouse operated, and having the ability to allow for point-to-point real-time teleconferencing. 4 figs.

Smith, R.L.

1990-03-09T23:59:59.000Z

210

Secure video communications system  

DOE Patents (OSTI)

A secure video communications system having at least one command network formed by a combination of subsystems. The combination of subsystems to include a video subsystem, an audio subsystem, a communications subsystem, and a control subsystem. The video communications system to be window driven and mouse operated, and having the ability to allow for secure point-to-point real-time teleconferencing.

Smith, Robert L. (Idaho Falls, ID)

1991-01-01T23:59:59.000Z

211

Texas Tech University System  

E-Print Network (OSTI)

Texas Tech University System :: Huffaker Named as Texas Tech System General Counsel http://www.texastech.edu/stories/12-03-TTUS-Washington-DC-Trip.php[4/2/2012 8:13:27 AM] Chancellor Hance and leadership from the Texas visited with Texas Tech students and Congressional interns while in Washington, D.C. March 27, 2012 Texas

Rock, Chris

212

HAN System Security Requirements  

Science Conference Proceedings (OSTI)

This report, "Home Area Network (HAN) Security Requirements," identifies and discusses the key cyber security requirements for different interfaces of HAN-based systems. These cyber security requirements for HAN interfaces are derived from the Department of Homeland Security (DHS) "Catalog of Control Systems Security," which provides an excellent checklist of general security requirements.

2009-12-22T23:59:59.000Z

213

Cognitive Aeronautical Communication System  

Science Conference Proceedings (OSTI)

The paper explores the system and architecture requirements for cognitive driven reconfigurable hardware for an aeronautical platform, such as commercial aircraft or high altitude platforms. With advances in components and processing hardware, mobile ... Keywords: Aeronautical Data Networks, Aeronautical Systems, Cognitive Data Networks, OFDM, Software Defined Radio

M. Erturk; Huseyin Arslan; Jamal Haque; Wilfrido Moreno

2011-01-01T23:59:59.000Z

214

Olympic voting system proposal  

Science Conference Proceedings (OSTI)

In an effort to address the contentious issue of judged Olympic events, the Olympic committee has proposed a pilot audience participation system to score the gymnastics and diving competitions in the upcoming 2004 Athens Summer Games. The system would ... Keywords: Olympics usability, audience, design methodology, ergonomics, industrial design, interaction design, interactive, interface, voting

Seamus Costello; Kari Kubala; Matt Turley; Mehmet Uzer

2004-04-01T23:59:59.000Z

215

Flue Gas Desulfurization Systems  

Science Conference Proceedings (OSTI)

In many of the operating flue gas desulfurization (FGD) systems throughout the world, materials corrosion leads to considerable costs and downtime. Utilities are often required to maintain, repair, replace, and/or upgrade existing materials to combat corrosion issues. This document provides the results of a recent EPRI survey that examined the various types of corrosion and materials damage in FGD systems.

2005-12-23T23:59:59.000Z

216

Portable modular detection system  

Science Conference Proceedings (OSTI)

Disclosed herein are portable and modular detection devices and systems for detecting electromagnetic radiation, such as fluorescence, from an analyte which comprises at least one optical element removably attached to at least one alignment rail. Also disclosed are modular detection devices and systems having an integrated lock-in amplifier and spatial filter and assay methods using the portable and modular detection devices.

Brennan, James S. (Rodeo, CA); Singh, Anup (Danville, CA); Throckmorton, Daniel J. (Tracy, CA); Stamps, James F. (Livermore, CA)

2009-10-13T23:59:59.000Z

217

Purge water management system  

DOE Patents (OSTI)

A purge water management system for effectively eliminating the production of purge water when obtaining a groundwater sample from a monitoring well. In its preferred embodiment, the purge water management system comprises an expandable container, a transportation system, and a return system. The purge water management system is connected to a wellhead sampling configuration, typically permanently installed at the well site. A pump, positioned with the monitoring well, pumps groundwater through the transportation system into the expandable container, which expands in direct proportion with volume of groundwater introduced, usually three or four well volumes, yet prevents the groundwater from coming into contact with the oxygen in the air. After this quantity of groundwater has been removed from the well, a sample is taken from a sampling port, after which the groundwater in the expandable container can be returned to the monitoring well through the return system. The purge water management system prevents the purge water from coming in contact with the outside environment, especially oxygen, which might cause the constituents of the groundwater to oxidize. Therefore, by introducing the purge water back into the monitoring well, the necessity of dealing with the purge water as a hazardous waste under the Resource Conservation and Recovery Act is eliminated.

Cardoso-Neto, Joao E. (North Augusta, SC); Williams, Daniel W. (Aiken, SC)

1996-01-01T23:59:59.000Z

218

Purge water management system  

DOE Patents (OSTI)

A purge water management system is described for effectively eliminating the production of purge water when obtaining a groundwater sample from a monitoring well. In its preferred embodiment, the purge water management system comprises an expandable container, a transportation system, and a return system. The purge water management system is connected to a wellhead sampling configuration, typically permanently installed at the well site. A pump, positioned with the monitoring well, pumps groundwater through the transportation system into the expandable container, which expands in direct proportion with volume of groundwater introduced, usually three or four well volumes, yet prevents the groundwater from coming into contact with the oxygen in the air. After this quantity of groundwater has been removed from the well, a sample is taken from a sampling port, after which the groundwater in the expandable container can be returned to the monitoring well through the return system. The purge water management system prevents the purge water from coming in contact with the outside environment, especially oxygen, which might cause the constituents of the groundwater to oxidize. Therefore, by introducing the purge water back into the monitoring well, the necessity of dealing with the purge water as a hazardous waste under the Resource Conservation and Recovery Act is eliminated.

Cardoso-Neto, J.E.; Williams, D.W.

1995-01-01T23:59:59.000Z

219

Systems Integration (Fact Sheet)  

DOE Green Energy (OSTI)

The Systems Integration (SI) subprogram works closely with industry, universities, and the national laboratories to overcome technical barriers to the large-scale deployment of solar technologies. To support these goals, the subprogram invests primarily in four areas: grid integration, technology validation, solar resource assessment, and balance of system development.

Not Available

2011-10-01T23:59:59.000Z

220

Radiation detection system  

SciTech Connect

A radiation detection system including a radiation-to-light converter and fiber optic wave guides to transmit the light to a remote location for processing. The system utilizes fluors particularly developed for use with optical fibers emitting at wavelengths greater than about 500 nm and having decay times less than about 10 ns.

Franks, Larry A. (Santa Barbara, CA); Lutz, Stephen S. (Santa Barbara, CA); Lyons, Peter B. (Los Alamos, NM)

1981-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "ized system distri" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Environmental geographic information system.  

Science Conference Proceedings (OSTI)

This document describes how the Environmental Geographic Information System (EGIS) was used, along with externally received data, to create maps for the Site-Wide Environmental Impact Statement (SWEIS) Source Document project. Data quality among the various classes of geographic information system (GIS) data is addressed. A complete listing of map layers used is provided.

Peek, Dennis; Helfrich, Donald Alan; Gorman, Susan

2010-08-01T23:59:59.000Z

222

Overview of locking systems  

Science Conference Proceedings (OSTI)

The purpose of this document is to present technical information that should be useful for understanding and applying locking systems for physical protection and control. There are major sections on hardware for locks, vaults, safes, and security containers. Other topics include management of lock systems and safety considerations. This document also contains notes on standards and specifications and a glossary.

Gee, K.T.; Scott, S.H.; Wilde, M.G. [Sandia National Labs., Albuquerque, NM (United States); Highland, S.E. [Albuquerque Safe Co., Albuquerque, NM (United States)

1993-12-01T23:59:59.000Z

223

Designing creative artificial systems  

Science Conference Proceedings (OSTI)

Can artificial systems be creative? Can they be designed to be creative on their own? What are the requirements of such creative artificial systems? To be able to support humans who are expected to deliver creative solutions, or to automate part of their ... Keywords: Agent, Creativity, Design, Interactivity, Learning, Self-Organization

Pieter H. G. Van Langen; Niek J. E. Wijngaards; Frances M. T. Brazier

2004-06-01T23:59:59.000Z

224

Fuzzy Systems in Biomedicine  

Science Conference Proceedings (OSTI)

The chapter presents recent advances of fuzzy systems in biomedicine. A short introduction is made on the main concepts of fuzzy sets theory. Then, a survey of recent research reports (2000 and beyond) is performed, in order to map existing theoretical ... Keywords: Biomedicine, Fuzzy Systems, Survey

Georgios Dounias

2007-06-01T23:59:59.000Z

225

Technology reviews: Glazing systems  

SciTech Connect

We present a representative review of existing, emerging, and future technology options in each of five hardware and systems areas in envelope and lighting technologies: lighting systems, glazing systems, shading systems, daylighting optical systems, and dynamic curtain wall systems. The term technology is used here to describe any design choice for energy efficiency, ranging from individual components to more complex systems to general design strategies. The purpose of this task is to characterize the state of the art in envelope and lighting technologies in order to identify those with promise for advanced integrated systems, with an emphasis on California commercial buildings. For each technology category, the following activities have been attempted to the extent possible: Identify key performance characteristics and criteria for each technology; determine the performance range of available technologies; identify the most promising technologies and promising trends in technology advances; examine market forces and market trends; and develop a continuously growing in-house database to be used throughout the project. A variety of information sources have been used in these technology characterizations, including miscellaneous periodicals, manufacturer catalogs and cut sheets, other research documents, and data from previous computer simulations. We include these different sources in order to best show the type and variety of data available, however publication here does not imply our guarantee of these data. Within each category, several broad classes are identified, and within each class we examine the generic individual technologies that fag into that class.

Schuman, J.; Rubinstein, F.; Papamichael, K.; Beltran, L.; Lee, E.S.; Selkowitz, S.

1992-09-01T23:59:59.000Z

226

Heavy Vehicle Systems  

Science Conference Proceedings (OSTI)

Heavy Vehicle (HV) systems are a necessary component of achieving OHVT goals. Elements are in place for a far-ranging program: short, intermediate, and long-term. Solicitation will bring industrial input and support. Future funding trend is positive, outlook for HV systems is good.

Sid Diamond; Richard Wares; Jules Routbort

2000-04-11T23:59:59.000Z

227

Heterodyne laser diagnostic system  

DOE Patents (OSTI)

The heterodyne laser diagnostic system includes, in one embodiment, an average power pulsed laser optical spectrum analyzer for determining the average power of the pulsed laser. In another embodiment, the system includes a pulsed laser instantaneous optical frequency measurement for determining the instantaneous optical frequency of the pulsed laser.

Globig, Michael A. (Antioch, CA); Johnson, Michael A. (Pleasanton, CA); Wyeth, Richard W. (Livermore, CA)

1990-01-01T23:59:59.000Z

228

Modular Integrated Energy Systems  

E-Print Network (OSTI)

energy system (or CHP -- Cooling, Heat and Power) system at Ft. Bragg. Much of this work is funded fired absorption chiller. The key goals of the project are: · Develop a set of "reference" CAD-based IES a 1000 Ton exhaust-driven absorption chiller, · Install and monitor the performance of a prototype IES

Oak Ridge National Laboratory

229

Quantum Spin Systems  

E-Print Network (OSTI)

This article is a short introduction to the general topic of quantum spin systems. After a brief sketch of the history of the subject, the standard mathematical framework for formulating problems and results in quantum spin systems is described. Then, three short sections are devoted to Spontaneaous Symmetry Breaking, Phase transitions, and Dynamcis.

Bruno Nachtergaele

2004-09-02T23:59:59.000Z

230

Plant Phenotype Characterization System  

DOE Green Energy (OSTI)

This report is the final scientific report for the DOE Inventions and Innovations Project: Plant Phenotype Characterization System, DE-FG36-04GO14334. The period of performance was September 30, 2004 through July 15, 2005. The project objective is to demonstrate the viability of a new scientific instrument concept for the study of plant root systems. The root systems of plants are thought to be important in plant yield and thus important to DOE goals in renewable energy sources. The scientific study and understanding of plant root systems is hampered by the difficulty in observing root activity and the inadequacy of existing root study instrumentation options. We have demonstrated a high throughput, non-invasive, high resolution technique for visualizing plant root systems in-situ. Our approach is based upon low-energy x-ray radiography and the use of containers and substrates (artificial soil) which are virtually transparent to x-rays. The system allows us to germinate and grow plant specimens in our containers and substrates and to generate x-ray images of the developing root system over time. The same plant can be imaged at different times in its development. The system can be used for root studies in plant physiology, plant morphology, plant breeding, plant functional genomics and plant genotype screening.

Daniel W McDonald; Ronald B Michaels

2005-09-09T23:59:59.000Z

231

Environmental Management System Plan  

E-Print Network (OSTI)

offices, the EMS Program Program Elements Environmental ManagementOffice of Institutional Assurance as stated in the OQMP. 3-7 Environmental ManagementEnvironmental Management System Fiscal Year Improve (EMP classification) Integrated Safety Management System International Organization for Standardization Lawrence Berkeley National Laboratory Office

Fox, Robert

2009-01-01T23:59:59.000Z

232

Human-system Interfaces for Automatic Systems  

SciTech Connect

Automation is ubiquitous in modern complex systems, and commercial nuclear- power plants are no exception. Automation is applied to a wide range of functions including monitoring and detection, situation assessment, response planning, and response implementation. Automation has become a 'team player' supporting personnel in nearly all aspects of system operation. In light of its increasing use and importance in new- and future-plants, guidance is needed to conduct safety reviews of the operator's interface with automation. The objective of this research was to develop such guidance. We first characterized the important HFE aspects of automation, including six dimensions: levels, functions, processes, modes, flexibility, and reliability. Next, we reviewed literature on the effects of all of these aspects of automation on human performance, and on the design of human-system interfaces (HSIs). Then, we used this technical basis established from the literature to identify general principles for human-automation interaction and to develop review guidelines. The guidelines consist of the following seven topics: automation displays, interaction and control, automation modes, automation levels, adaptive automation, error tolerance and failure management, and HSI integration. In addition, our study identified several topics for additional research.

OHara, J.M.; Higgins,J. (BNL); Fleger, S.; Barnes V. (NRC)

2010-11-07T23:59:59.000Z

233

Safety System Oversight  

NLE Websites -- All DOE Office Websites (Extended Search)

Safety System Oversight Safety System Oversight Office of Nuclear Safety Home Safety System Oversight Home Annual SSO/FR Workshop DOE Safety Links › ORPS Info › Operating Experience Summary › DOE Lessons Learned › Accident Investigation Program Assessment Tools › SSO CRADS Subject Matter Links General Program Information › Program Mission Statement › SSO Program Description › SSO Annual Award Program › SSO Annual Award › SSO Steering Committee › SSO Program Assessment CRAD SSO Logo Items Site Leads and Steering Committee Archive Facility Representative Contact Us HSS Logo SSO SSO Program News Congratulations to Ronnie L. Alderson of Nevada Field Office, the Winner of the 2012 Safety System Oversight Annual Award! 2012 Safety System Oversight Annual Award Nominees SSO Staffing Analysis

234

Electrochemical thermodynamic measurement system  

DOE Patents (OSTI)

The present invention provides systems and methods for accurately characterizing thermodynamic and materials properties of electrodes and electrochemical energy storage and conversion systems. Systems and methods of the present invention are configured for simultaneously collecting a suite of measurements characterizing a plurality of interconnected electrochemical and thermodynamic parameters relating to the electrode reaction state of advancement, voltage and temperature. Enhanced sensitivity provided by the present methods and systems combined with measurement conditions that reflect thermodynamically stabilized electrode conditions allow very accurate measurement of thermodynamic parameters, including state functions such as the Gibbs free energy, enthalpy and entropy of electrode/electrochemical cell reactions, that enable prediction of important performance attributes of electrode materials and electrochemical systems, such as the energy, power density, current rate and the cycle life of an electrochemical cell.

Reynier, Yvan (Meylan, FR); Yazami, Rachid (Los Angeles, CA); Fultz, Brent T. (Pasadena, CA)

2009-09-29T23:59:59.000Z

235

CEBAF cryogenic system  

SciTech Connect

The CEBAF cryogenic system consists of 3 refrigeration systems: Cryogenic Test Facility (CTF), Central Helium Liquefier (CHL), and End Station Refrigerator (ESR). CHL is the main cryogenic system for CEBAF, consisting of a 4.8 kW, 2.0 K refrigerator and transfer line system to supply 2.0 K and 12 kW of 50 K shield refrigeration for the Linac cavity cryostats and 10 g/s of liquid for the end stations. This paper describes the 9-year effort to commission these systems, concentrating on CHL with the cold compressors. The cold compressors are a cold vacuum pump with an inlet temperature of 3 K which use magnetic bearings, thereby eliminating the possibility of air leaks into the subatmospheric He.

NONE

1995-12-31T23:59:59.000Z

236

Traction Drive Systems Breakout  

NLE Websites -- All DOE Office Websites (Extended Search)

Traction Drive Systems Breakout Traction Drive Systems Breakout John M. Miller, PhD, PE, F.IEEE, F.SAE Oak Ridge National Laboratory Facilitator July 24, 2012 EV Everywhere Grand Challenge Vehicle Technologies Program - Advanced Power Electronics and Electric Motors eere.energy.gov EV Everywhere Traction Drive System * DOE goals for Electric Traction Drive System (TDS) innovations must be disruptive innovation focused to meet the CY2022 price target ($20,000 $25,000) for a mid-sized 5 passenger sedan having 5 year simple payback. Enhanced Efficiency Reduced Cost Traction Drive System EETT Roadmap: "Therefore, research is needed to develop technologies that are less expensive and, at the same time, smaller, lighter, more efficient, and equally reliable as conventional automotive technologies. "

237

Business System Management Review  

NLE Websites -- All DOE Office Websites (Extended Search)

P-004 Business System Management Review Process 11_0304Page 1 of 7 P-004 Business System Management Review Process 11_0304Page 1 of 7 EOTA - Business Process Document Title: Business System Management Review Process Document Number: P-004 Rev 11_0304 Document Owner: Elizabeth Sousa Backup Owner: Melissa Otero Approver(s): Melissa Otero Parent Document: Q-001, Quality Manual Notify of Changes: EOTA Employees Referenced Document(s): F-009, Business System Management Review Template P-004 Business System Management Review Process 11_0304Page 2 of 7 Revision History: Rev. Description of Change A Initial Release 08_0414 Corrective Actions, Preventive Actions, and Improvement Opportunity 09_1124 Edited document for clarity and to better fit the process in use. Added requirement to provide management with

238

Basic fluid system trainer  

DOE Patents (OSTI)

This invention, a trainer mounted and housed within a mobile console, is used to teach and reinforce fluid principles to students. The system trainer has two centrifugal pumps, each driven by a corresponding two-speed electric motor. The motors are controlled by motor controllers for operating the pumps to circulate the fluid stored within a supply tank through a closed system. The pumps may be connected in series or in parallel. A number of valves are also included within the system to effect different flow paths for the fluid. In addition, temperature and pressure sensing instruments are installed throughout the closed system for measuring the characteristics of the fluid, as it passes through the different valves and pumps. These measurements are indicated on a front panel mounted to the console, as a teaching aid, to allow the students to observe the characteristics of the system.

Semans, J.P.; Johnson, P.G.; LeBoeuf, R.F. Jr.; Kromka, J.A.; Goron, R.H.; Hay, G.D.

1991-04-30T23:59:59.000Z

239

Data acquisition system  

DOE Patents (OSTI)

A data acquisition circuit for a particle detection system that allows for time tagging of particles detected by the system. The particle detection system screens out background noise and discriminate between hits from scattered and unscattered particles. The detection system can also be adapted to detect a wide variety of particle types. The detection system utilizes a particle detection pixel array, each pixel containing a back-biased PIN diode, and a data acquisition pixel array. Each pixel in the particle detection pixel array is in electrical contact with a pixel in the data acquisition pixel array. In response to a particle hit, the affected PIN diodes generate a current, which is detected by the corresponding data acquisition pixels. This current is integrated to produce a voltage across a capacitor, the voltage being related to the amount of energy deposited in the pixel by the particle. The current is also used to trigger a read of the pixel hit by the particle.

Shapiro, Stephen L. (14228 Amherst Ct., Los Altos Hills, CA 94022); Mani, Sudhindra (1618 17th St., Sacramento, CA 95814); Atlas, Eugene L. (440 De Anza Ct., Oceanside, CA 92057); Cords, Dieter H. W. (526 Cuesta Real, La Honda, CA 94020); Holbrook, Britt (4540 Varsity Ct., Sacramento, CA 95841)

1997-01-01T23:59:59.000Z

240

Adsorption Refrigeration System  

SciTech Connect

Adsorption refrigeration is an environmentally friendly cooling technology which could be driven by recovered waste heat or low-grade heat such as solar energy. In comparison with absorption system, an adsorption system has no problems such as corrosion at high temperature and salt crystallization. In comparison with vapor compression refrigeration system, it has the advantages of simple control, no moving parts and less noise. This paper introduces the basic theory of adsorption cycle as well as the advanced adsorption cycles such as heat and mass recovery cycle, thermal wave cycle and convection thermal wave cycle. The types, characteristics, advantages and drawbacks of different adsorbents used in adsorption refrigeration systems are also summarized. This article will increase the awareness of this emerging cooling technology among the HVAC engineers and help them select appropriate adsorption systems in energy-efficient building design.

Wang, Kai [ORNL; Vineyard, Edward Allan [ORNL

2011-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "ized system distri" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Basic fluid system trainer  

DOE Patents (OSTI)

A trainer, mounted and housed within a mobile console, is used to teach and reinforce fluid principles to students. The system trainer has two centrifugal pumps, each driven by a corresponding two-speed electric motor. The motors are controlled by motor controllers for operating the pumps to circulate the fluid stored within a supply tank through a closed system. The pumps may be connected in series or in parallel. A number of valves are also included within the system to effect different flow paths for the fluid. In addition, temperature and pressure sensing instruments are installed throughout the closed system for measuring the characteristics of the fluid, as it passes through the different valves and pumps. These measurements are indicated on a front panel mounted to the console, as a teaching aid, to allow the students to observe the characteristics of the system.

Semans, Joseph P. (Uniontown, PA); Johnson, Peter G. (Pittsburgh, PA); LeBoeuf, Jr., Robert F. (Clairton, PA); Kromka, Joseph A. (Idaho Falls, ID); Goron, Ronald H. (Connellsville, PA); Hay, George D. (Venetia, PA)

1993-01-01T23:59:59.000Z

242

Transportation System Requirements Document  

SciTech Connect

This Transportation System Requirements Document (Trans-SRD) describes the functions to be performed by and the technical requirements for the Transportation System to transport spent nuclear fuel (SNF) and high-level radioactive waste (HLW) from Purchaser and Producer sites to a Civilian Radioactive Waste Management System (CRWMS) site, and between CRWMS sites. The purpose of this document is to define the system-level requirements for Transportation consistent with the CRWMS Requirement Document (CRD). These requirements include design and operations requirements to the extent they impact on the development of the physical segments of Transportation. The document also presents an overall description of Transportation, its functions, its segments, and the requirements allocated to the segments and the system-level interfaces with Transportation. The interface identification and description are published in the CRWMS Interface Specification.

1993-09-01T23:59:59.000Z

243

Balance-of-System Equipment Required for Renewable Energy Systems |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Balance-of-System Equipment Required for Renewable Energy Systems Balance-of-System Equipment Required for Renewable Energy Systems Balance-of-System Equipment Required for Renewable Energy Systems July 2, 2012 - 8:21pm Addthis Both grid-connected and off-grid home renewable energy systems require additional “balance-of-system” equipment. Both grid-connected and off-grid home renewable energy systems require additional "balance-of-system" equipment. How does it work? With a stand-alone system, depending on your needs, balance-of-system equipment could account for half of your total system costs. For both stand-alone and grid-connect systems, you will need power conditioning equipment, safety equipment, and meters and instrumentation. For stand-alone systems, you will also want batteries and charge controllers.

244

Solar hot water system update  

DOE Green Energy (OSTI)

Brief descriptions are given of the following three systems: (1) thermosyphon system, (2) system with drain-down freeze protection, and (3) system with antifreeze as freeze protection. (MOW)

Levary, A.

1978-01-01T23:59:59.000Z

245

EIA 176 Query System, 2003  

Annual Energy Outlook 2012 (EIA)

3 EIA Home > Natural Gas > Natural Gas Data Publications EIA 176 Query System 2003 The EIA-176 Query System is a Windows-based system which runs under Windows operating systems 95,...

246

EIA 176 Query System, 2001  

Gasoline and Diesel Fuel Update (EIA)

1 EIA Home > Natural Gas > Natural Gas Data Publications EIA 176 Query System 2001 The EIA-176 Query system is a Windows-based system which runs under Windows operating systems 95,...

247

EIA 176 Query System, 2004  

Gasoline and Diesel Fuel Update (EIA)

4 EIA Home > Natural Gas > Natural Gas Data Publications EIA 176 Query System 2004 The EIA-176 Query System is a Windows-based system which runs under Windows operating systems 95,...

248

Flywheel Power Systems: Market Analysis  

Science Conference Proceedings (OSTI)

High speed flywheel power systems offer a new opportunity to provide power delivery systems. Such systems are very useful to mitigate power quality problems. This report focuses on the industrial market for flywheel storage systems.

1998-02-20T23:59:59.000Z

249

Danish Atomic Energy Commission Research Establishment Riso  

E-Print Network (OSTI)

-Wigner formula usually forms a poor basis for cross section calculations. In late years a channel fission theory independent of J and 1. In accordance with the channel fission theory the fission width distri- bution

250

Fast VQ Codebook Search in KLT Space Wladyslaw Skarbek(a)3  

E-Print Network (OSTI)

by Jedrzejek, Cieplinski [8] (TCLP algorithm): from those codewords which have means in the interval [mx 0min with a uniform distri- bution, the most eective is TCLP algorithm while for image data source, EMV algorithm has

Vialatte, François

251

Cognition and Collaboration Systems Group  

Science Conference Proceedings (OSTI)

... to fully autonomous behaviors; develop modeling and simulation techniques for intelligent systems; and enable intelligent cyber-physical systems. ...

2012-08-30T23:59:59.000Z

252

Advanced Integrated Systems Technology Development  

E-Print Network (OSTI)

Research Energy Systems Integration Environmentallyenergy use, combined with the capability of the BMS system, including alarms to identify anomalies. Integration

2013-01-01T23:59:59.000Z

253

The web of system performance  

Science Conference Proceedings (OSTI)

Because information system performance is multidimensional, specialist theories of performance dimensions must be integrated into a model of system design.

Brian Whitworth; Jerry Fjermestad; Edward Mahinda

2006-05-01T23:59:59.000Z

254

Identity Management Systems Program Homepage  

Science Conference Proceedings (OSTI)

Identity Management Systems Program. ... Identity management systems are responsible for the creation, use, and termination of electronic identities. ...

2010-10-05T23:59:59.000Z

255

System Testing using UML Models  

Science Conference Proceedings (OSTI)

Coverage of system states during system testing is a nontrivial problem. It is because the number of system states is usually very large, and system developers often do not construct system state model. In this paper, we propose a method to design system ...

Monalisa Sarma; Rajib Mall

2007-10-01T23:59:59.000Z

256

Medical imaging systems  

DOE Patents (OSTI)

A medical imaging system provides simultaneous rendering of visible light and fluorescent images. The system may employ dyes in a small-molecule form that remains in a subject's blood stream for several minutes, allowing real-time imaging of the subject's circulatory system superimposed upon a conventional, visible light image of the subject. The system may also employ dyes or other fluorescent substances associated with antibodies, antibody fragments, or ligands that accumulate within a region of diagnostic significance. In one embodiment, the system provides an excitation light source to excite the fluorescent substance and a visible light source for general illumination within the same optical guide that is used to capture images. In another embodiment, the system is configured for use in open surgical procedures by providing an operating area that is closed to ambient light. More broadly, the systems described herein may be used in imaging applications where a visible light image may be usefully supplemented by an image formed from fluorescent emissions from a fluorescent substance that marks areas of functional interest.

Frangioni, John V. (Wayland, MA)

2012-07-24T23:59:59.000Z

257

Advanced turbine systems program  

SciTech Connect

In accordance with the goals of the DOE program, improvements in the gas turbine are the primary focus of Allison activity during Phase I. To this end Allison conducted a survey of potentially applicable gas turbine cycles and selected the advanced combined cycle as reference system. Extensive analysis of two versions of the advanced combined cycle was performed against the requirement for a 60% thermal efficiency (LHV) utility-sized, natural gas fired system. This analysis resulted in technology requirements for this system. Additional analysis determined emissions potential for the system, established a coal-fueled derivative system and a commercialization plan. This report deals with the technical requirements for a system that meets the thermal efficiency goal. Allison initially investigated four basic thermodynamic cycles: Humid air turbine, intercalate-recuperated systems, advanced combined cycle, chemically recuperated cycle. Our survey and cycle analysis indicated that au had the potential of reaching 60% thermal efficiency. We also concluded that engine hot section technology would be a critical technology regardless of which cycle was chosen. Based on this result Allison chose to concentrate on the advanced combined cycle. This cycle is well known and understood by the utility turbine user community and is therefore likely to be acceptable to users.

Wilkes, C.; Mukavetz, D.W.; Knickerbocker, T.K.; Ali, S.A.

1992-12-31T23:59:59.000Z

258

Advanced turbine systems program  

SciTech Connect

In accordance with the goals of the DOE program, improvements in the gas turbine are the primary focus of Allison activity during Phase I. To this end Allison conducted a survey of potentially applicable gas turbine cycles and selected the advanced combined cycle as reference system. Extensive analysis of two versions of the advanced combined cycle was performed against the requirement for a 60% thermal efficiency (LHV) utility-sized, natural gas fired system. This analysis resulted in technology requirements for this system. Additional analysis determined emissions potential for the system, established a coal-fueled derivative system and a commercialization plan. This report deals with the technical requirements for a system that meets the thermal efficiency goal. Allison initially investigated four basic thermodynamic cycles: Humid air turbine, intercalate-recuperated systems, advanced combined cycle, chemically recuperated cycle. Our survey and cycle analysis indicated that au had the potential of reaching 60% thermal efficiency. We also concluded that engine hot section technology would be a critical technology regardless of which cycle was chosen. Based on this result Allison chose to concentrate on the advanced combined cycle. This cycle is well known and understood by the utility turbine user community and is therefore likely to be acceptable to users.

Wilkes, C.; Mukavetz, D.W.; Knickerbocker, T.K.; Ali, S.A.

1992-01-01T23:59:59.000Z

259

Systems Integration Methodology  

Science Conference Proceedings (OSTI)

A multi-disciplinary team led by the Advanced Power and Energy Program (APEP) of the University of California at Irvine is defining the system engineering issues associated with the integration of key components and subsystems into power plant systems that meet performance and emission goals of VISION 21. The myriad of fuels, fuel processing, power generation, and emission control technologies are narrowed down to selected scenarios by a screening analysis to identify those combinations that have the potential to achieve the VISION 21 goals consisting of 60% efficiency (HHV) for coal based systems and 75% efficiency (LHV) for gas-based systems. The selected promising cycle scenarios are then analyzed in detail to develop the performance and costs for each. The methodology used in arriving at these promising cases and the preliminary results of the cycle analyses are presented. The technology levels considered are based on projected technical and manufacturing advances being made in industry and on advances identified in current and future government supported research such as the Clean Coal Program, Combustion 2000 (LEBS and HIPPS), Advanced Turbine Systems program, Low-Cost Advanced Fuel Cell programs, and the Flexible Gas Turbine Systems program. Examples of systems included in these advanced cycles are solid oxide and molten carbonate fuel cells, advanced gas turbines, ion transport membrane separation and hydrogen-oxygen combustion.

Samuelsen, Scott; Rao, Ashok

2001-11-06T23:59:59.000Z

260

Battery management system  

SciTech Connect

A battery management system is described, comprising: a main battery; main battery charging system means coupled to the main battery for charging the main battery during operation of the main battery charging system means; at least one auxiliary battery; primary switching means for coupling the auxiliary battery to a parallel configuration with the main battery charging system means and with the main battery, where upon both the main battery and the auxiliary battery are charged by the main battery charging system means, the primary switching means also being operable to decouple the auxiliary battery from the parallel configuration; and sensing means coupled to the primary switching means and operable to sense presence or absence of charging current from the main battery charging system means to the main battery, the sensing means being operable to activate the switching means for coupling the auxiliary battery into the parallel configuration during presence of the charging current, wherein the main battery charging system provides a charging signal to the main battery having an alternating current component, and wherein the sensing means includes transformer means coupled to the charging signal for inducing a voltage, the voltage being applied to a switching circuit of the switching means.

Albright, C.D.

1993-07-06T23:59:59.000Z

Note: This page contains sample records for the topic "ized system distri" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Cody hydrothermal system  

DOE Green Energy (OSTI)

The hot springs of Colter's Hell are the surface manifestations of a much larger hydothermal system. That system has been studied to define its extent, maximum temperature, and mechanism of operation. The study area covers 2700 km/sup 2/ (1040 mi/sup 2/) in northwest Wyoming. Research and field work included locating and sampling the hot springs, geologic mapping, thermal logging of available wells, measuring thermal conductivities, analyzing over 200 oil and gas well bottom-hole temperatures, and compiling and analyzing hydrologic data. These data were used to generate a model for the hydrothermal system.

Heasler, H.P.

1982-01-01T23:59:59.000Z

262

Power management system  

DOE Patents (OSTI)

A method of managing power resources for an electrical system of a vehicle may include identifying enabled power sources from among a plurality of power sources in electrical communication with the electrical system and calculating a threshold power value for the enabled power sources. A total power load placed on the electrical system by one or more power consumers may be measured. If the total power load exceeds the threshold power value, then a determination may be made as to whether one or more additional power sources is available from among the plurality of power sources. At least one of the one or more additional power sources may be enabled, if available.

Algrain, Marcelo C. (Peoria, IL); Johnson, Kris W. (Washington, IL); Akasam, Sivaprasad (Peoria, IL); Hoff, Brian D. (East Peoria, IL)

2007-10-02T23:59:59.000Z

263

Photovoltaic system reliability  

SciTech Connect

This paper discusses the reliability of several photovoltaic projects including SMUD`s PV Pioneer project, various projects monitored by Ascension Technology, and the Colorado Parks project. System times-to-failure range from 1 to 16 years, and maintenance costs range from 1 to 16 cents per kilowatt-hour. Factors contributing to the reliability of these systems are discussed, and practices are recommended that can be applied to future projects. This paper also discusses the methodology used to collect and analyze PV system reliability data.

Maish, A.B.; Atcitty, C. [Sandia National Labs., NM (United States); Greenberg, D. [Ascension Technology, Inc., Lincoln Center, MA (United States)] [and others

1997-10-01T23:59:59.000Z

264

Solar energy system  

SciTech Connect

A solar energy system is described for selectively absorbing or reflecting radiant energy entering through a window of a structure, the system comprising a window drape having a decorative side and a back side, and a removable liner adjacent the backside of the window drape. At least one side of the liner or window drape backside is a radiant energy reflecting surface and another of said sides is a radiant energy absorbing surface. Thus, depending upon the season of the year, the system may be arranged to selectively provide the appropriate surface to optimize or minimize the radiant energy maintained within the structure.

Mole, R.A.

1977-05-03T23:59:59.000Z

265

THE RHIC INJECTION SYSTEM.  

SciTech Connect

The RHIC injection system has to transport beam from the AGS-to-RHIC transfer line onto the closed orbits of the RHIC Blue and Yellow rings. This task can be divided into three problems. First, the beam has to be injected into either ring. Second, once injected the beam needs to be transported around the ring for one turn. Third, the orbit must be closed and coherent beam oscillations around the closed orbit should be minimized. We describe our solutions for these problems and report on system tests conducted during the RHIC Sextant test performed in 1997. The system will be fully commissioned in 1999.

FISCHER,W.; GLENN,J.W.; MACKAY,W.W.; PTITSIN,V.; ROBINSON,T.G.; TSOUPAS,N.

1999-03-29T23:59:59.000Z

266

Absorption heat pump system  

DOE Patents (OSTI)

An improvement in an absorption heat pump cycle is obtained by adding adiabatic absorption and desorption steps to the absorber and desorber of the system. The adiabatic processes make it possible to obtain the highest temperature in the absorber before any heat is removed from it and the lowest temperature in the desorber before heat is added to it, allowing for efficient utilization of the thermodynamic availability of the heat supply stream. The improved system can operate with a larger difference between high and low working fluid concentrations, less circulation losses, and more efficient heat exchange than a conventional system.

Grossman, Gershon (Oak Ridge, TN); Perez-Blanco, Horacio (Knoxville, TN)

1984-01-01T23:59:59.000Z

267

Downhole telemetry system  

DOE Patents (OSTI)

A downhole telemetry system is described for optically communicating to the surface operating parameters of a drill bit during ongoing drilling operations. The downhole telemetry system includes sensors mounted with a drill bit for monitoring at least one operating parameter of the drill bit and generating a signal representative thereof. The downhole telemetry system includes means for transforming and optically communicating the signal to the surface as well as means at the surface for producing a visual display of the optically communicated operating parameters of the drill bit. 7 figs.

Normann, R.A.; Kadlec, E.R.

1994-11-08T23:59:59.000Z

268

Internet Banking System Prototype  

E-Print Network (OSTI)

Internet Banking System refers to systems that enable bank customers to access accounts and general information on bank products and services through a personal computer or other intelligent device. Internet banking products and services can include detailed account information for corporate customers as well as account summery and transfer money. Ultimately, the products and services obtained through Internet Banking may mirror products and services offered through other bank delivery channels. In this paper, Internet Banking System Prototype has been proposed in order to illustrate the services which is provided by the Bank online services.

Alnaqeib, Rami; Jalab, Hamid A; Zaidan, M A; Hmood, Ali K

2010-01-01T23:59:59.000Z

269

Photovoltaic lighting system performance  

DOE Green Energy (OSTI)

The performance of 21 PV-powered low pressure sodium lighting systems on a multi-use has been documented in this paper. Specific areas for evaluation include the vandal resistant PV modules, constant voltage and on/off PV charge controllers, flooded deep-cycle lead-antimony and valve regulated lead-acid (VLRA) gel batteries, and low pressure sodium ballasts and lights. The PV lighting system maintenance intervals and lessons learned have been documented over the past 2.5 years. The above performance data has shown that with careful hardware selection, installation, and maintenance intervals the PV lighting systems will operate reliably.

Harrington, S.R.; Hund, T.D.

1996-06-01T23:59:59.000Z

270

Collector: storage wall systems  

SciTech Connect

Passive Trombe wall systems require massive masonry walls to minimize large temperature swings and movable night insulation to prevent excessive night heat losses. As a solar energy collection system, Trombe wall systems have low efficiencies because of the nature of the wall and, if auxiliary heat is needed, because of absorption of this heat. Separation of collector and storage functions markedly improves the efficiency. A simple fiberglass absorber can provide high efficiency while phase change storage provides a compact storage unit. The need for movable insulation is obviated.

Boardman, H.

1980-01-01T23:59:59.000Z

271

Executive information system  

DOE Green Energy (OSTI)

The Executive Information System (EIS) is a computer-based information handling system. The system has been designed and implemented for Energy Conversion and Utilization Technologies to allow program managers easy access and tracking of certain types of reporting at various levels of management interaction, to simplify the handling of program-related data, and to streamline the preparation of reporting documents and responses to requests for information from the program. The EIS is especially useful in assisting DOE program managers in the routine dissemination of reports and information. The characteristics of each component of the EIS are discussed. A user's guide to the EIS is included in this report.

Vitullo, M.; Winter, C.; Johnson, D.R.

1984-07-01T23:59:59.000Z

272

Advanced Monitoring systems initiative  

SciTech Connect

The Advanced Monitoring Systems Initiative (AMSI) actively searches for promising technologies and aggressively moves them from the research bench into DOE/NNSA end-user applications. There is a large unfulfilled need for an active element that reaches out to identify and recruit emerging sensor technologies into the test and evaluation function. Sensor research is ubiquitous, with the seeds of many novel concepts originating in the university systems, but at present these novel concepts do not move quickly and efficiently into real test environments. AMSI is a widely recognized, self-sustaining ''business'' accelerating the selection, development, testing, evaluation, and deployment of advanced monitoring systems and components.

R.J. Venedam; E.O. Hohman; C.F. Lohrstorfer; S.J. Weeks; J.B. Jones; W.J. Haas

2004-09-30T23:59:59.000Z

273

Shock destruction armor system  

DOE Patents (OSTI)

A shock destruction armor system is constructed and arranged to destroy the force of impact of a projectile by shock hydrodynamics. The armor system is designed to comprise a plurality of superimposed armor plates each preferably having a thickness less than five times the projectile's diameter and are preferably separated one-from-another by a distance at least equal to one-half of the projectile's diameter. The armor plates are effective to hydrodynamically and sequentially destroy the projectile. The armor system is particularly adapted for use on various military vehicles, such as tanks, aircraft and ships.

Froeschner, Kenneth E. (Livermore, CA)

1993-01-01T23:59:59.000Z

274

Computerized procedures system  

DOE Patents (OSTI)

An online data driven computerized procedures system that guides an operator through a complex process facility's operating procedures. The system monitors plant data, processes the data and then, based upon this processing, presents the status of the current procedure step and/or substep to the operator. The system supports multiple users and a single procedure definition supports several interface formats that can be tailored to the individual user. Layered security controls access privileges and revisions are version controlled. The procedures run on a server that is platform independent of the user workstations that the server interfaces with and the user interface supports diverse procedural views.

Lipner, Melvin H. (Monroeville, PA); Mundy, Roger A. (North Huntingdon, PA); Franusich, Michael D. (Upper St. Clair, PA)

2010-10-12T23:59:59.000Z

275

Distributed Optimization System  

DOE Patents (OSTI)

A search system and method for controlling multiple agents to optimize an objective using distributed sensing and cooperative control. The search agent can be one or more physical agents, such as a robot, and can be software agents for searching cyberspace. The objective can be: chemical sources, temperature sources, radiation sources, light sources, evaders, trespassers, explosive sources, time dependent sources, time independent sources, function surfaces, maximization points, minimization points, and optimal control of a system such as a communication system, an economy, a crane, and a multi-processor computer.

Hurtado, John E. (Albuquerque, NM); Dohrmann, Clark R. (Albuquerque, NM); Robinett, III, Rush D. (Tijeras, NM)

2004-11-30T23:59:59.000Z

276

Sustainable Acquisition Coding System | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Acquisition Coding System Sustainable Acquisition Coding System Sustainable Acquisition Coding System Sustainable Acquisition Coding System More Documents & Publications Policy...

277

Hydrothermal System | Open Energy Information  

Open Energy Info (EERE)

Hydrothermal System Hydrothermal System (Redirected from Hydrothermal Systems) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Print PDF Hydrothermal Systems Geothermal Technologies There are many types of Geothermal Technologies that take advantage of the earth's heat: Hydrothermal Systems Enhanced Geothermal Systems (EGS) Sedimentary Geothermal Systems Co-Produced Geothermal Systems Geothermal Direct Use Ground Source Heat Pumps Dictionary.png Hydrothermal Systems: A hydrothermal system is one that included fluid, heat, and permeability in a naturally occurring geological formation for the production of electricity. Other definitions:Wikipedia Reegle Geothermal production well at Imperial Valley, California. The drilling of production wells, such as this one in southern California, results in

278

Securing Control Systems Modems  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Recommended Practice for Securing Recommended Practice for Securing Control System Modems January 2008 iii ABSTRACT This paper addresses an often overlooked "backdoor" into critical infrastructure control systems created by modem connections. A modem's connection to the public telephone system is similar to a corporate network connection to the Internet. By tracing typical attack paths into the system, this paper provides the reader with an analysis of the problem and then guides the reader through methods to evaluate existing modem security. Following the analysis, a series of methods for securing modems is provided. These methods are correlated to well-known networking security methods. iv ACKNOWLEDGEMENT This document was developed for the U.S. Department of Homeland

279

Electricity Distribution System Workshop  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Grid Tech Team Grid Tech Team Discussion Summary Electricity Distribution System Workshop 2 Table of Contents INTRODUCTION ............................................................................................................................................. 3 EXECUTIVE SUMMARY .................................................................................................................................. 4 Process ...................................................................................................................................................... 4 Common Themes ...................................................................................................................................... 5 Discussion Topic Tables ............................................................................................................................. 8

280

PDSF's Eliza File Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Eliza File Systems Eliza File Systems Eliza File Systems Storage at PDSF is organized by group and all partitions are exported to all the nodes in the cluster. Please note that files on these file systems are not backed up. It is the responsibility of users to back up their files themselves as necessary. Over the years at PDSF there have been incidents which resulted in a loss of data from disk, often related to aging hardware. Note that the way to display the SGE io units on the command line is "qconf -se global". Disk Vault Experiments SGE io units Disk Space (TB) Directories eliza1 Atlas 400 35 atlas eliza2 Atlas 200 35 atlas eliza5 Cuore, Kamland 400 34 cuore kamland eliza6 Alice, RNC, Star 400 34 alice rnc star eliza7 Dayabay 200 24 dayabay icecube

Note: This page contains sample records for the topic "ized system distri" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Systems Engineering and Integration  

Energy.gov (U.S. Department of Energy (DOE))

The fuel cycle in use today in the United States faces challenges in achieving the goals of sustainability. While used fuel is safely stored at reactor sites, the development of a system to manage...

282

Advanced synchronous luminescence system  

DOE Patents (OSTI)

A method and apparatus for determining the condition of tissue or otherwise making chemical identifications includes exposing the sample to a light source, and using a synchronous luminescence system to produce a spectrum that can be analyzed for tissue condition.

Vo-Dinh, Tuan (Knoxville, TN)

1997-01-01T23:59:59.000Z

283

Genomics and Systems Biology  

NLE Websites -- All DOE Office Websites (Extended Search)

Genomics and Systems Biology Genomics and Systems Biology Genomics and Systems Biology Los Alamos scientists perform research in functional genomics and structural genomics, and applications for such work cover diverse fields such as energy, agriculture, and environmental cleanup. Get Expertise Babetta Marrone Biofuels Program Manager Email Cheryl Kuske DOE BER Biological System Science Division Program Manager Email Chris Detter Emerging Threats Program Manager: Email Rebecca McDonald Bioscience Communications Email "We were asked to build a rocket ship," said developer Joel Berendzen, "but instead we built a 10,000 mph motorcycle." - Sequedex team LANL leads the world in computational finishing of microbial genomes Protein research Read caption + In 2013, Los Alamos scientist Richard Sayre and his team genetically

284

NETL: Gasification Systems - Solicitations  

NLE Websites -- All DOE Office Websites (Extended Search)

Shelf > Solicitations Shelf > Solicitations Gasification Systems Solicitations All NETL Solicitations / Funding Opportunity Announcements (FOA) Gasification RSS Feed NETL RSS Feeds: List of available NETL RSS feeds. Business & Solicitations RSS: Subscribe to this to be notified of all NETL solicitations or FOA postings. Gasification RSS: Subscribe to this to be notified of Gasification news, solicitations and FOA postings. Business Alert Notification System Official notification is available through the Business Alert Notification System. *These notifications are provided as a courtesy and there may be a delay between the opportunity announcement and the arrival of the alert. SOLICITATION TITLE / AWARDS ANNOUNCEMENT PROJECT PAGE(S) 12.11.13: Fossil Energy's Request for Information DE-FOA-0001054; titled "Novel Crosscutting Research and Development to Support Advanced Energy Systems." Application due date is January 15, 2014. Applications and/or instructions can be found with this Funding Opportunity Announcement on FedConnect.

285

Integrating Management Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Mission Execution by Mission Execution by Integrating our Management Systems Integrating our Management Systems 1 W e e k l y O p e r a t i o n s M e e t i n g N o v e m b e r 1 , 2 0 1 1 M i c h a e l J . W e i s Pulling the Pieces Together for Improving DOE Management to Enable Mission Execution 2  Process changes Process changes  Behavioral changes Behavioral changes  System changes System changes Process Change Approach Strengthening and Expediting Decision Making 3 Proposed Outcomes Horizontal Integration Incoming DOE Business Crosscutting Issues (i.e. NLDC input) Hi-level Roadblocks Operations Management Council Associate Deputy Secretary Collaborative Action Process Chief Operating Officer Weekly Operations Council (OMC) Super 8 Secretary (ADS) (CAP) Board (COOB) p Meeting Endorsement / Commitment Super 8 US Meetings COO Meetings

286

Solar system fault detection  

SciTech Connect

A fault detecting apparatus and method are provided for use with an active solar system. The apparatus provides an indication as to whether one or more predetermined faults have occurred in the solar system. The apparatus includes a plurality of sensors, each sensor being used in determining whether a predetermined condition is present. The outputs of the sensors are combined in a pre-established manner in accordance with the kind of predetermined faults to be detected. Indicators communicate with the outputs generated by combining the sensor outputs to give the user of the solar system and the apparatus an indication as to whether a predetermined fault has occurred. Upon detection and indication of any predetermined fault, the user can take appropriate corrective action so that the overall reliability and efficiency of the active solar system are increased.

Farrington, Robert B. (Wheatridge, CO); Pruett, Jr., James C. (Lakewood, CO)

1986-01-01T23:59:59.000Z

287

Relay contact monitoring system  

Science Conference Proceedings (OSTI)

A switching system for switching on and off heating and air conditioning units in an environmental control system. The switching system includes a thermostat and a relay conductively coupled to the thermostat. The relay has a contact, which is responsive to a change signal for changing its position. The system further includes a programmable monitor having predetermined positions stored in a memory. The monitor is conductively coupled to the contact and to the thermostat for continually determining the position of the contact, and for sending a change signal to the relay for switching the position of the contact, as needed, to be in conformance with a predetermined position stored in the memory. 3 figs.

Mehta, V.

1994-01-11T23:59:59.000Z

288

Solar heating system  

DOE Patents (OSTI)

An improved solar heating system in which the incident radiation of the sun is absorbed on collector panels, transferred to a storage unit and then distributed as heat for a building and the like. The improvement is obtained by utilizing a storage unit comprising separate compartments containing an array of materials having different melting points ranging from 75.degree. to 180.degree. F. The materials in the storage system are melted in accordance with the amount of heat absorbed from the sun and then transferred to the storage system. An efficient low volume storage system is provided by utilizing the latent heat of fusion of the materials as they change states in storing and releasing heat for distribution.

Schreyer, James M. (Oak Ridge, TN); Dorsey, George F. (Concord, TN)

1982-01-01T23:59:59.000Z

289

Improved solar heating systems  

DOE Patents (OSTI)

An improved solar heating system is described in which the incident radiation of the sun is absorbed on collector panels, transferred to a storage unit and then distributed as heat for a building and the like. The improvement is obtained by utilizing a storage unit comprising separate compartments containing an array of materials having different melting points ranging from 75 to 180/sup 0/F. The materials in the storage system are melted in accordance with the amount of heat absorbed from the sun and then transferred to the storage system. An efficient low volume storage system is provided by utilizing the latent heat of fusion of the materials as they change states in storing ad releasing heat for distribution.

Schreyer, J.M.; Dorsey, G.F.

1980-05-16T23:59:59.000Z

290

Sustainable Electrical Energy Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Sustainable Electrical Energy Systems Speaker(s): Mark O'Malley Date: June 27, 2012 - 12:00pm Location: 90-1099 Seminar HostPoint of Contact: Sila Kiliccote The process of making...

291

Architectures for cooperative systems  

Science Conference Proceedings (OSTI)

The primary perspective which the author brings to this topic comes from working with the design and implementation of high level CASE tools. The interest which I have in software architectures for cooperative systems stems from considering the problem ...

Brian Hanley

1995-04-01T23:59:59.000Z

292

Pupillary efficient lighting system  

DOE Patents (OSTI)

A lighting system having at least two independent lighting subsystems each with a different ratio of scotopic illumination to photopic illumination. The radiant energy in the visible region of the spectrum of the lighting subsystems can be adjusted relative to each other so that the total scotopic illumination of the combined system and the total photopic illumination of the combined system can be varied independently. The dilation or contraction of the pupil of an eye is controlled by the level of scotopic illumination and because the scotopic and photopic illumination can be separately controlled, the system allows the pupil size to be varied independently of the level of photopic illumination. Hence, the vision process can be improved for a given level of photopic illumination. 5 figs.

Berman, S.M.; Jewett, D.L.

1989-04-14T23:59:59.000Z

293

Tandem mobile robot system  

DOE Patents (OSTI)

A robotic vehicle system for terrain navigation mobility provides a way to climb stairs, cross crevices, and navigate across difficult terrain by coupling two or more mobile robots with a coupling device and controlling the robots cooperatively in tandem.

Buttz, James H. (Albuquerque, NM); Shirey, David L. (Albuquerque, NM); Hayward, David R. (Albuquerque, NM)

2003-01-01T23:59:59.000Z

294

Secondary fuel delivery system  

SciTech Connect

A secondary fuel delivery system for delivering a secondary stream of fuel and/or diluent to a secondary combustion zone located in the transition piece of a combustion engine, downstream of the engine primary combustion region is disclosed. The system includes a manifold formed integral to, and surrounding a portion of, the transition piece, a manifold inlet port, and a collection of injection nozzles. A flowsleeve augments fuel/diluent flow velocity and improves the system cooling effectiveness. Passive cooling elements, including effusion cooling holes located within the transition boundary and thermal-stress-dissipating gaps that resist thermal stress accumulation, provide supplemental heat dissipation in key areas. The system delivers a secondary fuel/diluent mixture to a secondary combustion zone located along the length of the transition piece, while reducing the impact of elevated vibration levels found within the transition piece and avoiding the heat dissipation difficulties often associated with traditional vibration reduction methods.

Parker, David M. (Oviedo, FL); Cai, Weidong (Oviedo, FL); Garan, Daniel W. (Orlando, FL); Harris, Arthur J. (Orlando, FL)

2010-02-23T23:59:59.000Z

295

Modular tokamak magnetic system  

DOE Patents (OSTI)

A modular tokamak system comprised of a plurality of interlocking modules. Each module is comprised of a vacuum vessel section, a toroidal field coil, modular saddle coils which generate a poloidal magnetic field and ohmic heating coils.

Yang, Tien-Fang

1986-11-20T23:59:59.000Z

296

Computer memory management system  

DOE Patents (OSTI)

A computer memory management system utilizing a memory structure system of "intelligent" pointers in which information related to the use status of the memory structure is designed into the pointer. Through this pointer system, The present invention provides essentially automatic memory management (often referred to as garbage collection) by allowing relationships between objects to have definite memory management behavior by use of coding protocol which describes when relationships should be maintained and when the relationships should be broken. In one aspect, the present invention system allows automatic breaking of strong links to facilitate object garbage collection, coupled with relationship adjectives which define deletion of associated objects. In another aspect, The present invention includes simple-to-use infinite undo/redo functionality in that it has the capability, through a simple function call, to undo all of the changes made to a data model since the previous `valid state` was noted.

Kirk, III, Whitson John (Greenwood, MO)

2002-01-01T23:59:59.000Z

297

Solar system fault detection  

DOE Patents (OSTI)

A fault detecting apparatus and method are provided for use with an active solar system. The apparatus provides an indication as to whether one or more predetermined faults have occurred in the solar system. The apparatus includes a plurality of sensors, each sensor being used in determining whether a predetermined condition is present. The outputs of the sensors are combined in a pre-established manner in accordance with the kind of predetermined faults to be detected. Indicators communicate with the outputs generated by combining the sensor outputs to give the user of the solar system and the apparatus an indication as to whether a predetermined fault has occurred. Upon detection and indication of any predetermined fault, the user can take appropriate corrective action so that the overall reliability and efficiency of the active solar system are increased.

Farrington, R.B.; Pruett, J.C. Jr.

1984-05-14T23:59:59.000Z

298

Pupillary efficient lighting system  

DOE Patents (OSTI)

A lighting system having at least two independent lighting subsystems each with a different ratio of scotopic illumination to photopic illumination. The radiant energy in the visible region of the spectrum of the lighting subsystems can be adjusted relative to each other so that the total scotopic illumination of the combined system and the total photopic illumination of the combined system can be varied independently. The dilation or contraction of the pupil of an eye is controlled by the level of scotopic illumination and because the scotopic and photopic illumination can be separately controlled, the system allows the pupil size to be varied independently of the level of photopic illumination. Hence, the vision process can be improved for a given level of photopic illumination.

Berman, Samuel M. (San Francisco, CA); Jewett, Don L. (Mill Valley, CA)

1991-01-01T23:59:59.000Z

299

Foundation for system security  

Science Conference Proceedings (OSTI)

We provide a coherent framework for the design and analysis of secure systems. Our framework is inspired by Lawrence Lessig's modalities of control, by Niklas Luhmann's theory of trust, by existing models of information security, and by existing models ...

Clark Thomborson

2009-01-01T23:59:59.000Z

300

Cogeneration System Design Options  

E-Print Network (OSTI)

The commercial or industrial firm contemplating cogeneration at its facilities faces numerous basic design choices. The possibilities exist for fueling the system with waste materials, gas, oil, coal, or other combustibles. The choice of boiler, engine, turbine, generator, switchgear, and balance of plant can be bewildering. This paper presents an overview and a systematic approach to the basic system alternatives and attributes. The presentation illustrates how these options match the electrical and thermal needs of a firm, and what kind of operating economics and system paybacks have been achieved. Several cogeneration options are also illustrated to eliminate the problems and uncertainties of dealing with uninterested or non-cooperative utilities, as well as to minimize system costs.

Gilbert, J. S.

1985-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "ized system distri" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

ALS superbend magnet system  

E-Print Network (OSTI)

ALS Superbend Magnet System J. Zbasnik , S. T. Wang ,of a High-Field Magnet for the ALS, Transactions AppliedRefrigeration options for the ALS Superbend dipole magnets,

2000-01-01T23:59:59.000Z

302

Data driven health system  

E-Print Network (OSTI)

Effective use of data is believed to be the key to address systemic inefficiencies in health innovation and delivery, and to significantly enhance value creation for patients and all stakeholders. However, there is no ...

Rosen Ceruolo, Melissa Beth

2013-01-01T23:59:59.000Z

303

Variable buoyancy system metric  

E-Print Network (OSTI)

Over the past 20 years, underwater vehicle technology has undergone drastic improvements, and vehicles are quickly gaining popularity as a tool for numerous oceanographic tasks. Systems used on the vehicle to alter buoyancy, ...

Jensen, Harold Franklin

2009-01-01T23:59:59.000Z

304

RF & Microwave Systems Group  

E-Print Network (OSTI)

Solutions to Challenging Problems · Robust Communications in Extreme Environments · Tagging, Tracking-mail: ewingpd@ornl.gov Core R&D Area Tagging, Tracking, and Locating · Theater Positioning Systems

305

Freeze resistant buoy system  

DOE Patents (OSTI)

A freeze resistant buoy system includes a tail-tube buoy having a thermally insulated section disposed predominantly above a waterline, and a thermo-siphon disposed predominantly below the waterline.

Hill, David E. (Knoxville, TN); Rodriguez, Jr., Miguel (Oak Ridge, TN); Greenbaum, Elias (Knoxville, TN); Klett, James W. (Knoxville, TN)

2007-08-21T23:59:59.000Z

306

Communal Polyethylene Biogas Systems.  

E-Print Network (OSTI)

?? In Lembang, a farming community on western Java, family-sized, plug-flow, polyethylene biogas systems fed with cow dung, are being used as an integrated solution (more)

Stoddard, Isak

2010-01-01T23:59:59.000Z

307

Solar powered desalination system  

E-Print Network (OSTI)

Desalination Systems Developers MIT BARC IMB Power Solar PVcells Solar PV cells 10 MW solar farm Solar pond FranciscoSolar Energy: PEC vs. PV Solar energy is just as important

Mateo, Tiffany Alisa

2011-01-01T23:59:59.000Z

308

Dirac File Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

http:help.nersc.gov consult@nersc.gov 1-800-66-NERSC, option 3 or 510-486-8611 Home For Users Computational Systems Dirac File storage File Storage Disk Quota...

309

Environmental Management System Plan  

E-Print Network (OSTI)

Protection Program, DOE Order 450.1A (June 4, 3. DOE Oand Health Reporting, DOE Order 231.1A (1995, as amended).Emergency Management System, DOE Order 151.1B (October 29,

Fox, Robert

2009-01-01T23:59:59.000Z

310

Environmental Management System Plan  

E-Print Network (OSTI)

3) environmental management programs, (4) training, (5)Management Programs3-5 Structure and Responsibility.3-6 Training,Management System Plan Program Elements Additional information regarding EMS training

Fox, Robert

2009-01-01T23:59:59.000Z

311

Stochastic Graph Transformation Systems  

Science Conference Proceedings (OSTI)

In distributed and mobile systems with volatile bandwidth and fragile connectivity, non-functional aspects like performance and reliability become more and more important. To formalize, measure, and predict such properties, stochastic methods are required. ...

Reiko Heckel; Georgios Lajios; Sebastian Menge

2006-01-01T23:59:59.000Z

312

System Compatibility Guidebook 2003  

Science Conference Proceedings (OSTI)

Electromagnetic compatibility between electrical equipment and its operating environment has been an ongoing challenge in the evolution of the electric power system. Today, new digital-electronic technologies and power electronics devices provide perhaps the most formidable challenges to the efforts of the utility industry, manufacturers, and end users to achieve compatibility. This CD-ROM provides an updated compilation of nonproprietary test results from work conducted since 1993 by EPRI's System Compa...

2004-03-29T23:59:59.000Z

313

Load sensing system  

DOE Patents (OSTI)

A load sensing system inexpensively monitors the weight and temperature of stored nuclear material for long periods of time in widely variable environments. The system can include an electrostatic load cell that encodes weight and temperature into a digital signal which is sent to a remote monitor via a coaxial cable. The same cable is used to supply the load cell with power. When multiple load cells are used, vast

Sohns, Carl W. (Oak Ridge, TN); Nodine, Robert N. (Knoxville, TN); Wallace, Steven Allen (Knoxville, TN)

1999-01-01T23:59:59.000Z

314

ORNL integrated forecasting system  

SciTech Connect

This paper describes the integrated system for forecasting electric energy and load. In the system, service area models of electrical energy (kWh) and load distribution (minimum and maximum loads and load duration curve) are linked to a state-level model of electrical energy (kWh). Thus, the service area forecasts are conditional upon the state-level forecasts. Such a linkage reduces considerably the data requirements for modeling service area electricity demand.

Rizy, C.G.

1983-01-01T23:59:59.000Z

315

Solar tracking system  

SciTech Connect

This report describes an automated solar tracking system which is adaptable to most solar collectors which require alignment with the sun's radiation. The system uses partially shaded photovoltaic solar cells to produce error signals for both elevation and azimuth tracking with a high degree of accuracy. An electrical circuit processes the error signals and controls gearmotors to direct the solar collector toward the sun.

Hammons, B.E.

1977-06-01T23:59:59.000Z

316

Controlled System Separation  

Science Conference Proceedings (OSTI)

Power systems are increasingly stressed by the rapid growth of electricity markets and renewable sources. As a result, the risks of a disturbance causing out-of-step generators or triggering cascading failures in a power system are also increasing. In extreme situations, successive line trips may break the power network into two or more islands in an undesired manner. For those areas without or lacking of generation capacities to support local electricity demands, much load has to be dropped, thus result...

2008-11-21T23:59:59.000Z

317

Benzene Monitor System report  

Science Conference Proceedings (OSTI)

Two systems for monitoring benzene in aqueous streams have been designed and assembled by the Savannah River Technology Center, Analytical Development Section (ADS). These systems were used at TNX to support sampling studies of the full-scale {open_quotes}SRAT/SME/PR{close_quotes} and to provide real-time measurements of benzene in Precipitate Hydrolysis Aqueous (PHA) simulant. This report describes the two ADS Benzene Monitor System (BMS) configurations, provides data on system operation, and reviews the results of scoping tests conducted at TNX. These scoping tests will allow comparison with other benzene measurement options being considered for use in the Defense Waste Processing Facility (DWPF) laboratory. A report detailing the preferred BMS configuration statistical performance during recent tests has been issued under separate title: Statistical Analyses of the At-line Benzene Monitor Study, SCS-ASG-92-066. The current BMS design, called the At-line Benzene Monitor (ALBM), allows remote measurement of benzene in PHA solutions. The authors have demonstrated the ability to calibrate and operate this system using peanut vials from a standard Hydragard{trademark} sampler. The equipment and materials used to construct the ALBM are similar to those already used in other applications by the DWPF lab. The precision of this system ({+-}0.5% Relative Standard Deviation (RSD) at 1 sigma) is better than the purge & trap-gas chromatograpy reference method currently in use. Both BMSs provide a direct measurement of the benzene that can be purged from a solution with no sample pretreatment. Each analysis requires about five minutes per sample, and the system operation requires no special skills or training. The analyzer`s computer software can be tailored to provide desired outputs. Use of this system produces no waste stream other than the samples themselves (i.e. no organic extractants).

Livingston, R.R.

1992-10-12T23:59:59.000Z

318

Ultrasonic flow metering system  

DOE Patents (OSTI)

A system for determining the density, flow velocity, and mass flow of a fluid comprising at least one sing-around circuit that determines the velocity of a signal in the fluid and that is correlatable to a database for the fluid. A system for determining flow velocity uses two of the inventive circuits with directional transmitters and receivers, one of which is set at an angle to the direction of flow that is different from the others.

Gomm, Tyler J. (Meridian, ID); Kraft, Nancy C. (Idaho Falls, ID); Mauseth, Jason A. (Pocatello, ID); Phelps, Larry D. (Pocatello, ID); Taylor, Steven C. (Idaho Falls, ID)

2002-01-01T23:59:59.000Z

319

Thermoelectrochemical system and method  

DOE Patents (OSTI)

A thermal electrochemical system is described in which an electrical current is generated between a cathode immersed in a concentrated aqueous solution of phosphoric acid and an anode immersed in a molten salt solution of ammonium phosphate and monohydric ammonium phosphate. Reactants consumed at the electrodes during the electrochemical reaction are thermochemically regenerated and recycled to the electrodes to provide continuous operation of the system. 5 figs.

Ludwig, F.A.; Townsend, C.W.; Eliash, B.M.

1995-11-28T23:59:59.000Z

320

Heat transport system  

DOE Patents (OSTI)

A heat transport system of small size which can be operated in any orientation consists of a coolant loop containing a vaporizable liquid as working fluid and includes in series a vaporizer, a condenser and two one-way valves and a pressurizer connected to the loop between the two valves. The pressurizer may be divided into two chambers by a flexible diaphragm, an inert gas in one chamber acting as a pneumatic spring for the system.

Pierce, Bill L. (Pittsburgh, PA)

1978-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "ized system distri" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Support System Initiating Events  

Science Conference Proceedings (OSTI)

This report documents current methods to identify and quantify support system initiating events SSIEs used in probabilistic risk assessment PRA. This report updates the guidance provided in an EPRI report published in 2006, Support System Initiating Events: Identification and Quantification Guideline 1013490, and has been developed with input from a broad spectrum of the PRA community. Cooperation with the U.S. Nuclear Regulatory Commission NRC and Idaho National Laboratory INL, under the provisions of t...

2008-12-19T23:59:59.000Z

322

Hybrid Cooling Systems  

Science Conference Proceedings (OSTI)

Water consumption by power plants has become an increasingly contentious siting issue. In nearly all fossil-fired and nuclear plants, water for plant cooling is by far the greatest water requirement. Therefore, the use of water-conserving cooling systems such as dry or hybrid cooling is receiving increasing attention. This technology overview from the Electric Power Research Institute (EPRI) provides a brief introduction to hybrid cooling systems. As defined in the report, the term "hybrid cooling" refer...

2011-11-23T23:59:59.000Z

323

Portable treatment systems study  

SciTech Connect

In developing their Site Treatment Plans (STPs), many of the Department of Energy installations identified some form of portable treatment, to facilitate compliant disposition of select mixed low-level wastestreams. The Environmental Management Office of Science and Technology requested that a systems study be performed to better define the potential role of portable treatment with respect to mixed low-level waste, highlight obstacles to implementation, and identify opportunities for future research and development emphasis. The study was performed by first establishing a representative set of mixed waste, then formulating portable treatment system concepts to meet the required processing needs for these wastes. The portable systems that were conceptualized were evaluated and compared to a fixed centralized treatment alternative. The system evaluations include a life-cycle cost analysis and an assessment of regulatory, institutional, and technical issues associated with the potential use of portable systems. The results of this study show that when all costs are included, there are no significant cost differences between portable systems and fixed systems. However, it is also emphasized that many uncertainties exist that could impact the cost of implementing portable treatment systems. Portable treatment could be made more attractive through private sector implementation, although there is little economic incentive for a commercial vendor to develop small, specialized treatment capabilities with limited applicability. Alternatively, there may also be valid reasons why fixed units cannot be used for some problematic wastestreams. In any event, there are some site-specific problems that still need to be addressed, and there may be some opportunity for research and development to make a positive impact in these areas.

Sherick, M.J.; Schwinkendorf, W.E.; Bechtold, T.E.; Cole, L.T.

1997-03-01T23:59:59.000Z

324

Closing the Gap in Control System Implementations  

E-Print Network (OSTI)

Control Systems . . . . . . . . . . . . . . . . . .Continuous-Time Linear Control Systems . . . . .Discrete-Time Linear Control Systems . . . . . . . . . . .

Saha, Indranil

2013-01-01T23:59:59.000Z

325

NERSC Systems History  

NLE Websites -- All DOE Office Websites (Extended Search)

History of Systems History of Systems History of Systems Established in 1974 at Lawrence Livermore National Laboratory, NERSC was moved to Berkeley Lab in 1996 with a goal of increased interactions with the UC Berkeley campus. NERSC Systems System Name Installed System Type CPU Computational Pool Interconnect Disk (TB) Avg. Power Linpack HPL/ Top Rank Peak GFlops/s Type Speed Nodes SMP Size Total Cores Aggregate Memory (GB) Avg. Memory/ CPU Edison 2013 Cray XC30 Xeon 12-Core 2.3 GHz 5,200 24 124,800 332,800 2.67GB Hopper 2010 Cray XE6 Opteron Hex-Core 2.1 GHz 6,384 24 153,216 216,832 1.3 GB Gemini 2,000 1,054,000 (5) 1,054,000 Carver 2010 IBM iDataPlex Intel Nehalem Quad-Core 2.6 GHz 400 8 3,200 9,600 3 GB 4X QDR InfiniBand NGF 36,856 (322) 42,656

326

Boosting the immune system  

NLE Websites -- All DOE Office Websites (Extended Search)

Boosting the immune system Boosting the immune system Name: Unknown Status: N/A Age: N/A Location: N/A Country: N/A Date: Around 1993 Question: As a biology teacher at Hoffman Estates High School I asked my junior and senior students to fashion a question for the Ask A Scientist board. We are presently studying the immune system and my students want to know if there is any artificial or natural way in which to boost their immune systems? Can you help us with this concept? Thanks from 6th hour biology. Replies: Antioxidants like vitamin C & E would offer protection. Vitamin A strengthens mucus membranes to thwart invaders and enhance total resistance (not necessarily immunity). Being generally physically fit is a huge factor, but studies with professional athletes suggest a faster spread of viruses and other agents through their system. Ginseng, mineral springs (hormesis - low ionizing radiation stimulation), and other agents have not been proven beneficial scientifically. In general, if you minimize damage via UV and other radiation to the immune system, minimize the aging process, you will maximize your immune response. Since Louis Pasteur, we should not forget targeting specific immunity via vaccines. Also, bone marrow transplants will help those that are immunodeficient. It is hoped that biotechnology will produce antibodies and other agents to order, that will be the magic bullets against any immunoinvader.

327

Vessel structural support system  

SciTech Connect

Vessel structural support system for laterally and vertically supporting a vessel, such as a nuclear steam generator having an exterior bottom surface and a side surface thereon. The system includes a bracket connected to the bottom surface. A support column is pivotally connected to the bracket for vertically supporting the steam generator. The system also includes a base pad assembly connected pivotally to the support column for supporting the support column and the steam generator. The base pad assembly, which is capable of being brought to a level position by turning leveling nuts, is anchored to a floor. The system further includes a male key member attached to the side surface of the steam generator and a female stop member attached to an adjacent wall. The male key member and the female stop member coact to laterally support the steam generator. Moreover, the system includes a snubber assembly connected to the side surface of the steam generator and also attached to the adjacent wall for dampening lateral movement of the steam generator. In addition, the system includes a restraining member of "flat" attached to the side surface of the steam generator and a bumper attached to the adjacent wall. The flat and the bumper coact to further laterally support the steam generator.

Jenko, James X. (N. Versailles, PA); Ott, Howard L. (Kiski Twp., Allegheny County, PA); Wilson, Robert M. (Plum Boro, PA); Wepfer, Robert M. (Murrysville, PA)

1992-01-01T23:59:59.000Z

328

Training Management Information System  

Science Conference Proceedings (OSTI)

The Training Management Information System (TMIS) is an integrated information system for all training related activities. TMIS is at the leading edge of training information systems used in the nuclear industry. The database contains all the necessary records to confirm the department's adherence to accreditation criteria and houses all test questions, student records and information needed to evaluate the training process. The key to the TMIS system is that the impact of any change (i.e., procedure change, new equipment, safety incident in the commercial nuclear industry, etc.) can be tracked throughout the training process. This ensures the best training can be performed that meets the needs of the employees. TMIS is comprised of six functional areas: Job and Task Analysis, Training Materials Design and Development, Exam Management, Student Records/Scheduling, Evaluation, and Commitment Tracking. The system consists of a VAX 6320 Cluster with IBM and MacIntosh computers tied into an ethernet with the VAX. Other peripherals are also tied into the system: Exam Generation Stations to include mark sense readers for test grading, Production PC's for Desk-Top Publishing of Training Material, and PC Image Workstations. 5 figs.

Rackley, M.P.

1989-01-01T23:59:59.000Z

329

Advanced Microturbine Systems  

SciTech Connect

Dept. of Energy (DOE) Cooperative Agreement DE-FC02-00-CH11061 was originally awarded to Honeywell International, Inc. ?? Honeywell Power Systems Inc. (HPSI) division located in Albuquerque, NM in October 2000 to conduct a program titled Advanced Microturbine Systems (AMS). The DOE Advanced Microturbines Systems Program was originally proposed as a five-year program to design and develop a high efficiency, low emissions, durable microturbine system. The period of performance was to be October 2000 through September 2005. Program efforts were underway, when one year into the program Honeywell sold the intellectual property of Honeywell Power Systems Inc. and HPSI ceased business operations. Honeywell made an internal decision to restructure the existing program due to the HPSI shutdown and submitted a formal request to DOE on September 24, 2001 to transfer the Cooperative Agreement to Honeywell Engines, Systems and Services (HES&S) in Phoenix, AZ in order to continue to offer support for DOE's Advanced Microturbine Program. Work continued on the descoped program under Cooperative Agreement No. DE-FC26-00-CH11061 and has been completed.

None

2005-12-31T23:59:59.000Z

330

Waste receiving and processing plant control system; system design description  

Science Conference Proceedings (OSTI)

The Plant Control System (PCS) is a heterogeneous computer system composed of numerous sub-systems. The PCS represents every major computer system that is used to support operation of the Waste Receiving and Processing (WRAP) facility. This document, the System Design Description (PCS SDD), includes several chapters and appendices. Each chapter is devoted to a separate PCS sub-system. Typically, each chapter includes an overview description of the system, a list of associated documents related to operation of that system, and a detailed description of relevant system features. Each appendice provides configuration information for selected PCS sub-systems. The appendices are designed as separate sections to assist in maintaining this document due to frequent changes in system configurations. This document is intended to serve as the primary reference for configuration of PCS computer systems. The use of this document is further described in the WRAP System Configuration Management Plan, WMH-350, Section 4.1.

LANE, M.P.

1999-02-24T23:59:59.000Z

331

Integrated Micro Nano Systems Integrated Micro Nano Systems  

E-Print Network (OSTI)

#12;Integrated Micro Nano Systems 2 #12;Integrated Micro Nano Systems 3 Val Jones (Ed.) Symposium on Integrated Micro Nano Systems: Convergence of bio and nanotechnologies, Enschede, The Netherlands, June 2006 Micro Nano Systems 4 #12;Integrated Micro Nano Systems 5 Preface In order to explore the convergence

Al Hanbali, Ahmad

332

Development and Testing of Hydrogen Storage System(s)  

E-Print Network (OSTI)

Development and Testing of Hydrogen Storage System(s) for Capturing Intermittent Renewable Energy ­ Analysis of Test Results for Hydrogen Storage Systems By Hawaii Natural Energy Institute School of Ocean of Kahua Ranch Hydrogen Storage System 3 3.1 Kahua Ranch Power System 3 3.2 Electrolyzer Experimental

333

Inspection system performance test procedure  

SciTech Connect

This procedure establishes requirements to administer a performance demonstration test. The test is to demonstrate that the double-shell tank inspection system (DSTIS) supplied by the contractor performs in accordance with the WHC-S-4108, Double-Shell Tank Ultrasonic Inspection Performance Specification, Rev. 2-A, January, 1995. The inspection system is intended to provide ultrasonic (UT) and visual data to determine integrity of the Westinghouse Hanford Company (WHC) site underground waste tanks. The robotic inspection system consists of the following major sub-systems (modules) and components: Mobile control center; Deployment module; Cable management assembly; Robot mechanism; Ultrasonic testing system; Visual testing system; Pneumatic system; Electrical system; and Control system.

Jensen, C.E.

1995-01-17T23:59:59.000Z

334

Improving sensornet performance by separating system configuration from system logic  

Science Conference Proceedings (OSTI)

Many sensor network protocols are self-configuring, but independent self-configuration at different layers often results in suboptimal performance. We present Chi, a full-system configuration architecture that separates system logic from system configuration. ...

Niclas Finne; Joakim Eriksson; Nicolas Tsiftes; Adam Dunkels; Thiemo Voigt

2010-02-01T23:59:59.000Z

335

ADVANCED TURBINE SYSTEMS PROGRAM  

SciTech Connect

Natural gas combustion turbines are rapidly becoming the primary technology of choice for generating electricity. At least half of the new generating capacity added in the US over the next twenty years will be combustion turbine systems. The Department of Energy has cosponsored with Siemens Westinghouse, a program to maintain the technology lead in gas turbine systems. The very ambitious eight year program was designed to demonstrate a highly efficient and commercially acceptable power plant, with the ability to fire a wide range of fuels. The main goal of the Advanced Turbine Systems (ATS) Program was to develop ultra-high efficiency, environmentally superior and cost effective competitive gas turbine systems for base load application in utility, independent power producer and industrial markets. Performance targets were focused on natural gas as a fuel and included: System efficiency that exceeds 60% (lower heating value basis); Less than 10 ppmv NO{sub x} emissions without the use of post combustion controls; Busbar electricity that are less than 10% of state of the art systems; Reliability-Availability-Maintainability (RAM) equivalent to current systems; Water consumption minimized to levels consistent with cost and efficiency goals; and Commercial systems by the year 2000. In a parallel effort, the program was to focus on adapting the ATS engine to coal-derived or biomass fuels. In Phase 1 of the ATS Program, preliminary investigators on different gas turbine cycles demonstrated that net plant LHV based efficiency greater than 60% was achievable. In Phase 2 the more promising cycles were evaluated in greater detail and the closed-loop steam-cooled combined cycle was selected for development because it offered the best solution with least risk for achieving the ATS Program goals for plant efficiency, emissions, cost of electricity and RAM. Phase 2 also involved conceptual ATS engine and plant design and technology developments in aerodynamics, sealing, combustion, cooling, materials, coatings and casting development. The market potential for the ATS gas turbine in the 2000-2014 timeframe was assessed for combined cycle, simple cycle and integrated gasification combined cycle, for three engine sizes. The total ATS market potential was forecasted to exceed 93 GW. Phase 3 and Phase 3 Extension involved further technology development, component testing and W501ATS engine detail design. The technology development efforts consisted of ultra low NO{sub x} combustion, catalytic combustion, sealing, heat transfer, advanced coating systems, advanced alloys, single crystal casting development and determining the effect of steam on turbine alloys. Included in this phase was full-load testing of the W501G engine at the McIntosh No. 5 site in Lakeland, Florida.

Gregory Gaul

2004-04-21T23:59:59.000Z

336

Reading Comprehension - Organs and Organ Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

together in a group make up an organ system. Examples of organ systems are cats and dogs the circulatory system and the respiratory system the stomacular system and...

337

Cathodic protection diagnostic expert system  

Science Conference Proceedings (OSTI)

A knowledge-based diagnostic system has been developed for troubleshooting cathodic protection systems. The expert system is designed to work in conjunction with a database that stores inventory and field measurement information and flags problem areas. The system is described, and examples of troubleshooting using the system are presented.

Van Blaricum, V.L.; Kumar, A. (Army Construction Engineering Research Labs., Champaign, IL (United States)); Park, Y.T. (Soong Sil Univ., Seoul (Korea, Republic of). Dept. of Computer Science)

1994-12-01T23:59:59.000Z

338

Security challenges in embedded systems  

Science Conference Proceedings (OSTI)

Embedded systems security is a significant requirement in emerging environments, considering the increasing deployment of embedded systems in several application domains. The large number of deployed embedded systems, their limited resources and their ... Keywords: Communication system security, computer security, embedded systems, security

Dimitrios N. Serpanos; Artemios G. Voyiatzis

2013-03-01T23:59:59.000Z

339

Mobile systems capability plan  

Science Conference Proceedings (OSTI)

This plan was prepared to initiate contracting for and deployment of these mobile system services. 102,000 cubic meters of retrievable, contact-handled TRU waste are stored at many sites around the country. Also, an estimated 38,000 cubic meters of TRU waste will be generated in the course of waste inventory workoff and continuing DOE operations. All the defense TRU waste is destined for disposal in WIPP near Carlsbad NM. To ship TRU waste there, sites must first certify that the waste meets WIPP waste acceptance criteria. The waste must be characterized, and if not acceptable, subjected to additional processing, including repackaging. Most sites plan to use existing fixed facilities or open new ones between FY1997-2006 to perform these functions; small-quantity sites lack this capability. An alternative to fixed facilities is the use of mobile systems mounted in trailers or skids, and transported to sites. Mobile systems will be used for all characterization and certification at small sites; large sites can also use them. The Carlsbad Area Office plans to pursue a strategy of privatization of mobile system services, since this offers a number of advantages. To indicate the possible magnitude of the costs of deploying mobile systems, preliminary estimates of equipment, maintenance, and operating costs over a 10-year period were prepared and options for purchase, lease, and privatization through fixed-price contracts considered.

NONE

1996-09-01T23:59:59.000Z

340

Modeling the earth system  

Science Conference Proceedings (OSTI)

The 1990 Global Change Institute (GCI) on Earth System Modeling is the third of a series organized by the Office for Interdisciplinary Earth Studies to look in depth at particular issues critical to developing a better understanding of the earth system. The 1990 GCI on Earth System Modeling was organized around three themes: defining critical gaps in the knowledge of the earth system, developing simplified working models, and validating comprehensive system models. This book is divided into three sections that reflect these themes. Each section begins with a set of background papers offering a brief tutorial on the subject, followed by working group reports developed during the institute. These reports summarize the joint ideas and recommendations of the participants and bring to bear the interdisciplinary perspective that imbued the institute. Since the conclusion of the 1990 Global Change Institute, research programs, nationally and internationally, have moved forward to implement a number of the recommendations made at the institute, and many of the participants have maintained collegial interactions to develop research projects addressing the needs identified during the two weeks in Snowmass.

Ojima, D. [ed.

1992-12-31T23:59:59.000Z

Note: This page contains sample records for the topic "ized system distri" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

PFBC system studies  

SciTech Connect

System studies of PFBC systems are summarized in this paper. These studies include: thermal efficiency; NO{sub x} stochastic analysis; dynamic modeling; scoping studies; and hazardous air pollutant (HAP) studies. These studies are being used for various reasons: to validate the economic and environmental benefits that this technology offers the country, to identify issues associated with the commercialization of PFBC technology, and to help the DOE and its industrial partners focus on those RD&D activities which produce the biggest bang for the buck, an increasingly important goal in the present climate of increasingly tight Federal and corporate budgets. This year, the conclusion that NO{sub x} generation in the solids combustor is the most important factor in determining NO{sub x} production in an uncontrolled system was of particular significance. The initial assessment of HAP`s, showing a possible reduction in HAPs emissions if the barrier filter is operated below 600 C in a first-generation PFBC, was the first time this type of data was produced on the ability of PFBC systems to be a low HAP`s emission technology. Work will continue to improve these analytic tools used in these system studies useful for both DOE and its industrial partners.

Reed, M.E.

1994-10-01T23:59:59.000Z

342

Miniaturized pressurization system  

DOE Patents (OSTI)

This invention relates to pressurization systems and liquid rocket propulsion systems, and particularly to those used to attitude control or maneuvering of small space vehicles or airborne vehicles where the requirement for thrust is intermittent rather than continuous, and must be available rapidly upon demand. This invention also relates to increasing performance of such propulsion systems, by way of eliminating inert mass from the propulsion system. The invention uses a fluid stored at a low pressure and provides the fluid at a high pressure. The invention allows the low pressure fluid to flow to a fluid bore of a differential pump and from the pump to a fluid pressure regulator. After flowing through the regulator the fluid is converted to a gas which is directed to a gas bore of the differential pump. By controlling the flow of gas entering and being exhausted from the gas bore, the invention provides pressure to the fluid. By setting the regulator, the high pressure fluid can be set at predetermined values. Because the invention only needs a low pressure fluid, the inventive apparatus has a low mass, and therefore would be useful in rocket propulsion systems.

Whitehead, J.C.; Swink, D.G.

1990-12-31T23:59:59.000Z

343

Cygnus Trigger System  

SciTech Connect

The Cygnus Dual Beam Radiographic Facility consists of two radiographic sources (Cygnus 1, Cygnus 2) each with a dose rating of 4 rads at 1 m, and a 1-mm diameter spot size. The electrical specifications are: 2.25 MV, 60 kA, 60 ns. This facility is located in an underground environment at the Nevada Test Site (NTS). These sources were developed as a primary diagnostic for subcritical tests, which are single-shot, high-value events. In such an application there is an emphasis on reliability and reproducibility. A robust, low-jitter trigger system is a key element for meeting these goals. The trigger system was developed with both commercial and project-specific equipment. In addition to the traditional functions of a trigger system there are novel features added to protect the investment of a high-value shot. Details of the trigger system, including elements designed specifically for a subcritical test application, will be presented. The individual electronic components have their nominal throughput, and when assembled have a system throughput with a measured range of jitter. The shot-to-shot jitter will be assessed both individually and in combination. Trigger reliability and reproducibility results will be presented for a substantial number of shots executed at the NTS.

G. Corrow, M. Hansen, D. Henderson, C. Mitton

2008-02-01T23:59:59.000Z

344

Sleeve reaction chamber system  

DOE Patents (OSTI)

A chemical reaction chamber system that combines devices such as doped polysilicon for heating, bulk silicon for convective cooling, and thermoelectric (TE) coolers to augment the heating and cooling rates of the reaction chamber or chambers. In addition the system includes non-silicon-based reaction chambers such as any high thermal conductivity material used in combination with a thermoelectric cooling mechanism (i.e., Peltier device). The heat contained in the thermally conductive part of the system can be used/reused to heat the device, thereby conserving energy and expediting the heating/cooling rates. The system combines a micromachined silicon reaction chamber, for example, with an additional module/device for augmented heating/cooling using the Peltier effect. This additional module is particularly useful in extreme environments (very hot or extremely cold) where augmented heating/cooling would be useful to speed up the thermal cycling rates. The chemical reaction chamber system has various applications for synthesis or processing of organic, inorganic, or biochemical reactions, including the polymerase chain reaction (PCR) and/or other DNA reactions, such as the ligase chain reaction.

Northrup, M. Allen (Berkeley, CA); Beeman, Barton V. (San Mateo, CA); Benett, William J. (Livermore, CA); Hadley, Dean R. (Manteca, CA); Landre, Phoebe (Livermore, CA); Lehew, Stacy L. (Livermore, CA); Krulevitch, Peter A. (Pleasanton, CA)

2009-08-25T23:59:59.000Z

345

Methods, apparatus, and systems for monitoring transmission systems  

DOE Patents (OSTI)

A sensing platform for monitoring a transmission system, and method therefor, may include a sensor that senses one or more conditions relating to a condition of the transmission system and/or the condition of an environment around the transmission system. A control system operatively associated with the sensor produces output data based on an output signal produced by the sensor. A transmitter operatively associated with the control system transmits the output data from the control system.

Polk, Robert E. (Idaho Falls, ID); Svoboda, John M. (Idaho Falls, ID); West, Phillip B. (Idaho Falls, ID); Heath, Gail L. (Iona, ID); Scott, Clark L. (Idaho Falls, ID)

2010-08-31T23:59:59.000Z

346

NREL: Vehicle Systems Analysis - Vehicle Systems Analysis Publications  

NLE Websites -- All DOE Office Websites (Extended Search)

Systems Analysis Publications The Vehicle Systems Analysis Team at the National Renewable Energy Laboratory publishes technical reports, conference papers, and presentations about...

347

Intelligent Transportation Systems Deployment Analysis System | Open Energy  

Open Energy Info (EERE)

Intelligent Transportation Systems Deployment Analysis System Intelligent Transportation Systems Deployment Analysis System Jump to: navigation, search Tool Summary Name: Intelligent Transportation Systems Deployment Analysis System Agency/Company /Organization: Cambridge Systematics Sector: Energy Focus Area: Transportation Resource Type: Software/modeling tools Website: idas.camsys.com/ Country: United States Northern America References: http://idas.camsys.com/ The ITS Deployment Analysis System (IDAS) is software developed by the Federal Highway Administration that can be used in planning for Intelligent Transportation System (ITS) deployments. State, regional, and local planners can use IDAS to estimate the benefits and costs of ITS investments - which are either alternatives to or enhancements of traditional highway

348

NREL: Energy Systems Integration - NREL's Energy Systems Integration...  

NLE Websites -- All DOE Office Websites (Extended Search)

a variety of operating configurations including, grid connected stand-alone microgrids and hybrid power systems. The PSIL can accommodate large power system components...

349

Photovoltaic Systems Interconnected onto Network Distribution Systems--Success Stories  

DOE Green Energy (OSTI)

This report examines six case studies of photovoltaic systems integrated into secondary network systems in four major U.S. Solar America cities.

Coddington, M.; Kroposki, B.; Basso, T.; Lynn, K.; Sammon, D.; Vaziri, M.; Yohn, T.

2009-04-01T23:59:59.000Z

350

Reliability calculations for complex systems; Tillfrlitlighetsberkningar fr komplexa system.  

E-Print Network (OSTI)

?? Functionality for efficient computation of properties of system lifetimes was developed, based on the Mathematica framework. The model of these systems consists of a (more)

Lenz, Malte

2011-01-01T23:59:59.000Z

351

An Intrusion Detection System Using Quantum-Mechanical Systems  

ORNL 2012-G00220/tcc UT-B ID 200701995 10.2012 An Intrusion Detection System Using Quantum-Mechanical Systems Technology Summary Securing property and ...

352

COAL & POWER SYSTEMS  

NLE Websites -- All DOE Office Websites (Extended Search)

COAL & POWER SYSTEMS COAL & POWER SYSTEMS STRATEGIC & MULTI-YEAR PROGRAM PLANS U.S. DEPARTMENT OF ENERGY * OFFICE OF FOSSIL ENERGY GREENER, SOONER... THROUGH TECHNOLOGY INTRODUCTION .......... i-1 STRATEGIC PLAN ........ 1-1 PROGRAM PLANS Vision 21 .......................... 2-1 Central Power Systems ...... 3-1 Distributed Generation ..... 4-1 Fuels ................................ 5-1 Carbon Sequestration ....... 6-1 Advanced Research ........... 7-1 TABLE OF CONTENTS STRATEGIC & MULTI-YEAR PROGRAM PLANS STRENGTH THROUGH SCIENCE... A "GREENER, SOONER" PHILOSOPHY Coal, natural gas, and oil fuel about 70 percent of the electricity generated in the United States. As promising as renewable and other alternative fuels are, it will be several decades before they can make significant energy contributions to the Nation's

353

HORIZONTAL BOILING REACTOR SYSTEM  

DOE Patents (OSTI)

Reactors of the boiling water type are described wherein water serves both as the moderator and coolant. The reactor system consists essentially of a horizontal pressure vessel divided into two compartments by a weir, a thermal neutronic reactor core having vertical coolant passages and designed to use water as a moderator-coolant posltioned in one compartment, means for removing live steam from the other compartment and means for conveying feed-water and water from the steam compartment to the reactor compartment. The system further includes auxiliary apparatus to utilize the steam for driving a turbine and returning the condensate to the feed-water inlet of the reactor. The entire system is designed so that the reactor is self-regulating and has self-limiting power and self-limiting pressure features.

Treshow, M.

1958-11-18T23:59:59.000Z

354

Arc fault detection system  

DOE Patents (OSTI)

An arc fault detection system for use on ungrounded or high-resistance-grounded power distribution systems is provided which can be retrofitted outside electrical switchboard circuits having limited space constraints. The system includes a differential current relay that senses a current differential between current flowing from secondary windings located in a current transformer coupled to a power supply side of a switchboard, and a total current induced in secondary windings coupled to a load side of the switchboard. When such a current differential is experienced, a current travels through a operating coil of the differential current relay, which in turn opens an upstream circuit breaker located between the switchboard and a power supply to remove the supply of power to the switchboard.

Jha, Kamal N. (Bethel Park, PA)

1999-01-01T23:59:59.000Z

355

Portable active interrogation system.  

SciTech Connect

The system consists of a pulsed DT neutron generator (5 x 10{sup 7} n/s) and a portable but high intrinsic efficiency, custom-designed, polyethylene-moderated {sup 3}He neutron detector. A multichannel scaler card in a ruggedized laptop computer acquires the data. A user-friendly LabVIEW program analyzes and displays the data. The program displays a warning message when highly enriched uranium or any other fissionable materials is detected at a specified number of sigmas above background in the delayed region between pulses. This report describes the system and gives examples of the response of the system to highly enriched uranium and some other fissionable materials, at several distances and with various shielding materials.

Moss, C. E. (Calvin E.); Brener, M. W. (Mathieu W.); Hollas, C. L. (Charles L.); Myers, W. L. (William L.)

2004-01-01T23:59:59.000Z

356

Alliance Laundry Systems LLC  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Alliance Laundry Systems LLC Alliance Laundry Systems LLC Shepard Street, P.O. Box 990 Ripon, WI 54971-0990 Tel 920.748.3121 Fax 920.748.4429 www.comlaundry.com Via E-Mail - GC_comments@hq.doe.gov December 7, 2010 Mr. Scott Blake Harris General Counsel U.S. Department of Energy 1000 Independence Ave., S.W. Washington, DC 20585 Subject: Your Request of 11-30-2010 Regarding Clothes Washer Test Procedure Waivers Dear Mr. Harris: Thank you for asking for our comments. Alliance Laundry Systems LLC (ALS) is knowledgeable of the multiple petitions for waiver to the Department's Clothes Washer Test Procedure, regarding the need for an expanded "test load size" table to account for clothes container capacities beyond the existing test procedure Table 5.1 maximum capacity of 3.5 cubic feet. While we do not manufacture clothes washers

357

Terminal automation system maintenance  

SciTech Connect

Nothing has improved petroleum product loading in recent years more than terminal automation systems. The presence of terminal automation systems (TAS) at loading racks has increased operational efficiency and safety and enhanced their accounting and management capabilities. However, like all finite systems, they occasionally malfunction or fail. Proper servicing and maintenance can minimize this. And in the unlikely event a TAS breakdown does occur, prompt and effective troubleshooting can reduce its impact on terminal productivity. To accommodate around-the-clock loading at racks, increasingly unattended by terminal personnel, TAS maintenance, servicing and troubleshooting has become increasingly demanding. It has also become increasingly important. After 15 years of trial and error at petroleum and petrochemical storage and transfer terminals, a number of successful troubleshooting programs have been developed. These include 24-hour {open_quotes}help hotlines,{close_quotes} internal (terminal company) and external (supplier) support staff, and {open_quotes}layered{close_quotes} support. These programs are described.

Coffelt, D.; Hewitt, J. [Engineered Systems Inc., Tempe, AZ (United States)

1997-01-01T23:59:59.000Z

358

Combustion pinhole camera system  

DOE Patents (OSTI)

A pinhole camera system is described utilizing a sealed optical-purge assembly which provides optical access into a coal combustor or other energy conversion reactors. The camera system basically consists of a focused-purge pinhole optical port assembly, a conventional TV vidicon receiver, an external, variable density light filter which is coupled electronically to the vidicon automatic gain control (agc). The key component of this system is the focused-purge pinhole optical port assembly which utilizes a purging inert gas to keep debris from entering the port and a lens arrangement which transfers the pinhole to the outside of the port assembly. One additional feature of the port assembly is that it is not flush with the interior of the combustor. 2 figs.

Witte, A.B.

1984-02-21T23:59:59.000Z

359

Hypersonic missile propulsion system  

Science Conference Proceedings (OSTI)

Pratt and Whitney is developing the technology for hypersonic components and engines. A supersonic combustion ramjet (scramjet) database was developed using hydrogen fueled propulsion systems for space access vehicles and serves as a point of departure for the current development of hydrocarbon scramjets. The Air Force Hypersonic Technology (HyTech) Program has put programs in place to develop the technologies necessary to demonstrate the operability, performance and structural durability of an expendable, liquid hydrocarbon fueled scramjet system that operates from Mach 4 to 8. This program will culminate in a flight type engine test at representative flight conditions. The hypersonic technology base that will be developed and demonstrated under HyTech will establish the foundation to enable hypersonic propulsion systems for a broad range of air vehicle applications from missiles to space access vehicles. A hypersonic missile flight demonstration is planned in the DARPA Affordable Rapid Response Missile Demonstrator (ARRMD) program in 2001.

Kazmar, R.R.

1998-11-01T23:59:59.000Z

360

Arc fault detection system  

DOE Patents (OSTI)

An arc fault detection system for use on ungrounded or high-resistance-grounded power distribution systems is provided which can be retrofitted outside electrical switchboard circuits having limited space constraints. The system includes a differential current relay that senses a current differential between current flowing from secondary windings located in a current transformer coupled to a power supply side of a switchboard, and a total current induced in secondary windings coupled to a load side of the switchboard. When such a current differential is experienced, a current travels through a operating coil of the differential current relay, which in turn opens an upstream circuit breaker located between the switchboard and a power supply to remove the supply of power to the switchboard. 1 fig.

Jha, K.N.

1999-05-18T23:59:59.000Z

Note: This page contains sample records for the topic "ized system distri" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Control systems under attack?  

E-Print Network (OSTI)

The enormous growth of the Internet during the last decade offers new means to share and distribute both information and data. In Industry, this results in a rapprochement of the production facilities, i.e. their Process Control and Automation Systems, and the data warehouses. At CERN, the Internet opens the possibility to monitor and even control (parts of) the LHC and its four experiments remotely from anywhere in the world. However, the adoption of standard IT technologies to Distributed Process Control and Automation Systems exposes inherent vulnerabilities to the world. The Teststand On Control System Security at CERN (TOCSSiC) is dedicated to explore the vulnerabilities of arbitrary Commercial-Of-The-Shelf hardware devices connected to standard Ethernet. As such, TOCSSiC should discover their vulnerabilities, point out areas of lack of security, and address areas of improvement which can then be confidentially communicated to manufacturers. This paper points out risks of accessing the Control and Automa...

Lders, Stefan

2005-01-01T23:59:59.000Z

362

Advanced drilling systems  

DOE Green Energy (OSTI)

Drilling is ubiquitous in oil, gas, geothermal, minerals, water well, and mining industries. Drilling and well completion account for 25% to 50% of the cost of producing power from geothermal energy. Reduced drilling costs will reduce the cost of electricity produced from geothermal resources. Undoubtedly, there are concepts for advanced drilling systems that have yet to be studied. However, the breadth and depth of previous efforts in this area almost guarantee that any new efforts will at least initially build on an idea or a variation of an idea that has already been investigated. Therefore, a review of previous efforts, coupled with a characterization of viable advanced drilling systems and the current state of technology as it applies to those systems, provide the basis for this study.

Pierce, K.G.; Finger, J.T. [Sandia National Labs., Albuquerque, NM (United States); Livesay, B.J. [Livesay Consultants, San Diego, CA (United States)

1995-12-31T23:59:59.000Z

363

Advanced drilling systems study.  

Science Conference Proceedings (OSTI)

This report documents the results of a study of advanced drilling concepts conducted jointly for the Natural Gas Technology Branch and the Geothermal Division of the U.S. Department of Energy. A number of alternative rock cutting concepts and drilling systems are examined. The systems cover the range from current technology, through ongoing efforts in drilling research, to highly speculative concepts. Cutting mechanisms that induce stress mechanically, hydraulically, and thermally are included. All functions necessary to drill and case a well are considered. Capital and operating costs are estimated and performance requirements, based on comparisons of the costs for alternative systems to conventional drilling technology, are developed. A number of problems common to several alternatives and to current technology are identified and discussed.

Pierce, Kenneth G.; Livesay, Billy Joe; Finger, John Travis (Livesay Consultants, Encintas, CA)

1996-05-01T23:59:59.000Z

364

Spectrographic imaging system  

DOE Patents (OSTI)

An imaging system for providing spectrographically resolved images. The system incorporates a one-dimensional spatial encoding mask which enables an image to be projected onto a two-dimensional image detector after spectral dispersion of the image. The dimension of the image which is lost due to spectral dispersion on the two-dimensional detector is recovered through employing a reverse transform based on presenting a multiplicity of different spatial encoding patterns to the image. The system is especially adapted for detecting Raman scattering of monochromatic light transmitted through or reflected from physical samples. Preferably, spatial encoding is achieved through the use of Hadamard mask which selectively transmits or blocks portions of the image from the sample being evaluated.

Morris, Michael D. (Ann Arbor, MI); Treado, Patrick J. (Ann Arbor, MI)

1991-01-01T23:59:59.000Z

365

EMDEX II system documentation  

Science Conference Proceedings (OSTI)

The EPRI EMDEX 2 system consists of hardware and software for characterizing electric and magnetic field exposures. The EMDEX 2 meter is a computer-base portable unit that samples, at a user-programmable rate, the three vector components of magnetic flux density, and a measure of the average electric field action on the torso of the wearer (if an optional sensor is worn). Modules of the EMCALC software package are used to program the EMDEX 2, retrieve data at the end of a measurement session, analyze EMDEX 2 data, and prepare tabular and graphical data summaries. The User Manual is designed to provide instruction on the use of the exposure system hardware and software. The Technical Reference Manual provides additional, detailed descriptions of the hardware, software and methodologies used in the EMDEX 2 system. 11 refs., 31 figs., 25 tabs.

Silva, J.M. (Enertech Consultants, Campbell, CA (United States))

1991-09-01T23:59:59.000Z

366

EMDEX 2 system documentation  

Science Conference Proceedings (OSTI)

The EPRI EMDEX 2 system consists of hardware and software for characterizing electric and magnetic field exposures. The EMDEX 2 meter is a computer-based portable unit that samples, at a user- programmable rate, the three vector components of magnetic flux density, and a measure of the average electric field acting on the torso of the wearer (if an optional sensor is worn). Modules of the EMCALC software package are used to program the EMDEX 2, retrieve data at the end of a measurement session, analyze EMDEX 2 data, and prepare tabular and graphical data summaries. The User Manual is designed to provide instruction on the use of the exposure system hardware and software. The Technical Reference Manual provides additional, detailed descriptions of the hardware, software and methodologies used in the EMDEX 2 system. 64 figs., 4 tabs.

Silva, J.M. (Enertech Consultants, Campbell, CA (United States))

1991-09-01T23:59:59.000Z

367

PROTECTIVE CLOTHING MONITORING SYSTEM  

SciTech Connect

An automatic conveyor-type laundry monitoring system, whlch monitors laboratory coats and coveralls for both alpha and beta-gamma contamination, was developed and installed at the Hanford Laundry Facility to improve monitoring efficiency and control. The instrument employs eight alpha and seven beta-gamma scintillation large-area detectors, a garment conveyor, solid state circuitry, and appropriate signaling devices. Oarments are manually placed on hangers which are then placed onto an automatic loading mechanism. Each garment is conveyed past detectors where it is monitored for beta-gamma and alpha contamination. Contaminated garments are rejected and dropped into a special contniner if spot contamination exceeds 1000 disintegrations per minute (dis/min) of alpha or 5000 dis/min of mixed fission products. The garments which are not rejected pass through for folding and distribution. The system, which requires only one attendant, can effectively monitor 500 garments per standard shift. System operation was fully successful for ten months. (auth)

Rankin, M.O.; Spear, W.G.

1963-08-01T23:59:59.000Z

368

Combustion pinhole camera system  

DOE Patents (OSTI)

A pinhole camera system utilizing a sealed optical-purge assembly which provides optical access into a coal combustor or other energy conversion reactors. The camera system basically consists of a focused-purge pinhole optical port assembly, a conventional TV vidicon receiver, an external, variable density light filter which is coupled electronically to the vidicon automatic gain control (agc). The key component of this system is the focused-purge pinhole optical port assembly which utilizes a purging inert gas to keep debris from entering the port and a lens arrangement which transfers the pinhole to the outside of the port assembly. One additional feature of the port assembly is that it is not flush with the interior of the combustor.

Witte, Arvel B. (Rolling Hills, CA)

1984-02-21T23:59:59.000Z

369

Hydrocarbon adsorption system  

SciTech Connect

In a solid adsorbent hydrocarbon recovery system for processing natural gas, towers adapted for performing adsorbing, cooling, and regenerating functions are used. It is recommended that a regeneration gas be used of substantially uniform richness in hydrocarbons in the closed-cycle regeneration system. The natural gas stream is flowed through an adsorbent bed to remove liquid hydrocarbons. A portion of the stripped gas stream is flowed through a second adsorbent bed for cooling purposes. A heated, rich, regeneration gas is circulated through a closed-cycle regeneration system that includes a third adsorbent bed. This rich regeneration gas is combined with the stripped gas stream. These steps are repeated in a cyclic operation. (10 claims)

Humphries, C.L.

1966-11-29T23:59:59.000Z

370

SERVOMOTOR CONTROL SYSTEM  

DOE Patents (OSTI)

Control systems for automatic positioning of an electric motor operated vapor valve are described which is operable under the severe conditions existing in apparatus for electro-magnetlcally separating isotopes. In general, the system includes a rotor for turning the valve comprising two colls mounted mutually perpendicular to each other and also perpendicular to the magnetic field of the isotope separating apparatus. The coils are furnished with both a-c and d- c current by assoclate control circuitry and a position control is provided for varying the ratlo of the a-c currents in the coils and at the same time, but in an inverse manner, the ratio between the d-c currents in the coils is varied. With the present system the magnitude of the motor torque is constant for all valves of the rotor orientatlon angle.

MacNeille, S.M.

1958-12-01T23:59:59.000Z

371

Portable battery powered system  

SciTech Connect

In an exemplary embodiment, a battery monitoring system includes sensors for monitoring battery parameters and a memory for storing data based thereon; for example, data may be stored representative of available battery capacity as measured during a deep discharge cycle, and by monitoring battery current thereafter during operation, a relatively accurate measure of remaining battery capacity becomes available. The battery monitoring system may include programmed processor circuitry and may be secured to the battery so as to receive operating power therefrom during storage and handling; thus, the performance of a given battery in actual use can be accurately judged since the battery system can itself maintain a count of accumulated hours of use and other relevant parameters.

Koenck, S.E.

1984-06-19T23:59:59.000Z

372

Plant immune systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Plant immune systems Plant immune systems Name: stephanie Status: N/A Age: N/A Location: N/A Country: N/A Date: Around 1993 Question: Do plants have an immune system? How does it work? Are plants able to "fight off" infections such as Dutch Elm disease? Replies: In the broadest sense, an immune system is any method an organism has protect itself from succeeding to another organism's efforts to undermine its health and integrity. In this sense, yes, plants have immune systems. Plants do NOT have "active" immune systems, like humans, including macrophages, lymls, antibodies, complements, interferon, etc., which help us ward off infection. Rather, plants have "passive" mechanisms of protection. For instance, the waxy secretion of some plants (cuticle) functions to help hold in moisture and keep out microorganisms. Plants can also secrete irritating juices that prevent insects and animals from eating it. The thick bark of woody plants is another example of a defensive adaptation, that protects the more delicate tissues inside. The chemical secretions of some plants are downright poisonous to many organisms, which greatly enhance the chances of survival for the plant. Fruits of plants contain large amounts of vitamin C and bioflavonoids, compounds which have been shown in the lab to be anti-bacterial and antiviral. So in these ways, plants can improve their chances of survival. Hundreds of viruses and bacteria attack plants each year, and the cost to agriculture is enormous. I would venture to guess that once an organism establishes an infection in a plant, the plant will not be able to "fight" it. However, exposure to the sun's UV light may help control an infection, possibly even defeat it, but the plant does not have any inherent "active" way to fight the infection

373

Advanced drilling systems study  

DOE Green Energy (OSTI)

This work was initiated as part of the National Advanced Drilling and Excavation Technologies (NADET) Program. It is being performed through joint finding from the Department of Energy Geothermal Division and the Natural Gas Technology Branch, Morgantown Energy Technology Center. Interest in advanced drilling systems is high. The Geothermal Division of the Department of Energy has initiated a multi-year effort in the development of advanced drilling systems; the National Research Council completed a study of drilling and excavation technologies last year; and the MIT Energy Laboratory recently submitted a proposal for a national initiative in advanced drilling and excavation research. The primary reasons for this interest are financial. Worldwide expenditures on oil and gas drilling approach $75 billion per year. Also, drilling and well completion account for 25% to 50% of the cost of producing electricity from geothermal energy. There is incentive to search for methods to reduce the cost of drilling. Work on ideas to improve or replace rotary drilling technology dates back at least to the 1930`s. There was a significant amount of work in this area in the 1960`s and 1970`s; and there has been some continued effort through the 1980`s. Undoubtedly there are concepts for advanced drilling systems that have yet to be studied; however, it is almost certain that new efforts to initiate work on advanced drilling systems will build on an idea or a variation of an idea that has already been investigated. Therefore, a review of previous efforts coupled with a characterization of viable advanced drilling systems and the current state of technology as it applies to those systems provide the basis for the current study of advanced drilling.

Pierce, K.G. [Sandia National Labs., Albuquerque, NM (United States); Livesay, B.J. [Livesay Consultants, San Diego, CA (United States)

1995-03-01T23:59:59.000Z

374

Case tool evaluation system  

SciTech Connect

An automated system that uses an analytical approach to evaluate Computer-Aided Software Engineering (CASE) tools is currently being developed. this system is referred to as the CASE Tool Evaluation System. The following general criteria will be used: overall tool functionality; tool stability; cost; interfaces with other software; customization; ease of use; output produced; hardware and operating system needs; documentation; training and vendor support; repository interface; methodologies; and vendor stability. in Phase 1 CASE tools will be eliminated that do not meet certain must-have'' characteristics specified by the user. Phase 2 will further reduce the size of the tool list by retaining those tools that possess desirable, but not absolutely necessary'' characteristics, also specified by the user. Phase 3 will employ the Analytic Hierarchy Process, developed by Dr. Thomas L. Saaty, to rank the tools. Users will be able to supply tools of their own choosing, in addition to tools that are generated via normal use of the system. All three phases will interact with a database that stores objective information about CASE tools. The use of the Analytic Hierarchy process (AHP) distinguishes this method of CASE tool evaluation from others. As used in this system, the AHP is a method of breaking down the complex, unstructured problem of selecting a CASE tool into its component evaluation criteria and candidate tools. These criteria and tools are arranged into a hierarchical order. Each criterion and tool is assigned a subjective numerical value (by experts or users or both). These values are then synthesized to determine which have the highest priority. The result will be a ranked list of CASE tools tailored to the needs and desires of the user.

Green, P.L.; Andreae, P.V.; Pennewell, W.J.; Clinard, L.A.; Thomas, B. Jr.; Tarrant, P.M.

1989-01-01T23:59:59.000Z

375

Industrial - Utility Cogeneration Systems  

E-Print Network (OSTI)

Cogeneration may be described as an efficient method for the production of electric power in conjunction with process steam or heat which optimizes the energy supplied as fuel to maximize the energy produced for consumption. In a conventional electric utility power plant, considerable energy is wasted in the form of heat rejection to the atmosphere thru cooling towers, ponds or lakes, or to rivers. In a cogeneration system heat rejection can be minimized by systems which apply the otherwise wasted energy to process systems requiring energy in the form of steam or heat. Texas has a base load of some 75 million pounds per hour of process steam usage, of which a considerable portion could be generated through cogeneration methods. The objective of this paper is to describe the various aspects of cogeneration in a manner which will illustrate the energy saving potential available utilizing proven technology. This paper illustrates the technical and economical benefits of cogeneration in addition to demonstrating the fuel savings per unit of energy required. Specific examples show the feasibility and desirability of cogeneration systems for utility and industrial cases. Consideration of utility-industrial systems as well as industrial-industrial systems will be described in technical arrangement as well as including a discussion of financial approaches and ownership arrangements available to the parties involved. There is a considerable impetus developing for the utilization of coal as the energy source for the production of steam and electricity. In many cases, because of economics and site problems, the central cogeneration facility will be the best alternative for many users.

Harkins, H. L.

1979-01-01T23:59:59.000Z

376

Quantitative Luminescence Imaging System  

SciTech Connect

The goal of the MEASUREMENT OF CHEMILUMINESCENCE project is to develop and deliver a suite of imaging radiometric instruments for measuring spatial distributions of chemiluminescence. Envisioned deliverables include instruments working at the microscopic, macroscopic, and life-sized scales. Both laboratory and field portable instruments are envisioned. The project also includes development of phantoms as enclosures for the diazoluminomelanin (DALM) chemiluminescent chemistry. A suite of either phantoms in a variety of typical poses, or phantoms that could be adjusted to a variety of poses, is envisioned. These are to include small mammals (rats), mid-sized mammals (monkeys), and human body parts. A complete human phantom that can be posed is a long-term goal of the development. Taken together, the chemistry and instrumentation provide a means for imaging rf dosimetry based on chemiluminescence induced by the heat resulting from rf energy absorption. The first delivered instrument, the Quantitative Luminescence Imaging System (QLIS), resulted in a patent, and an R&D Magazine 1991 R&D 100 award, recognizing it as one of the 100 most significant technological developments of 1991. The current status of the project is that three systems have been delivered, several related studies have been conducted, two preliminary human hand phantoms have been delivered, system upgrades have been implemented, and calibrations have been maintained. Current development includes sensitivity improvements to the microscope-based system; extension of the large-scale (potentially life-sized targets) system to field portable applications; extension of the 2-D large-scale system to 3-D measurement; imminent delivery of a more refined human hand phantom and a rat phantom; rf, thermal and imaging subsystem integration; and continued calibration and upgrade support.

Batishko, C.R.; Stahl, K.A.; Fecht, B.A.

1992-12-31T23:59:59.000Z

377

Industrial process surveillance system  

DOE Patents (OSTI)

A system and method for monitoring an industrial process and/or industrial data source. The system includes generating time varying data from industrial data sources, processing the data to obtain time correlation of the data, determining the range of data, determining learned states of normal operation and using these states to generate expected values, comparing the expected values to current actual values to identify a current state of the process closest to a learned, normal state; generating a set of modeled data, and processing the modeled data to identify a data pattern and generating an alarm upon detecting a deviation from normalcy.

Gross, Kenneth C. (Bolingbrook, IL); Wegerich, Stephan W. (Glendale Heights, IL); Singer, Ralph M. (Naperville, IL); Mott, Jack E. (Idaho Falls, ID)

1998-01-01T23:59:59.000Z

378

Industrial Process Surveillance System  

DOE Patents (OSTI)

A system and method for monitoring an industrial process and/or industrial data source. The system includes generating time varying data from industrial data sources, processing the data to obtain time correlation of the data, determining the range of data, determining learned states of normal operation and using these states to generate expected values, comparing the expected values to current actual values to identify a current state of the process closest to a learned, normal state; generating a set of modeled data, and processing the modeled data to identify a data pattern and generating an alarm upon detecting a deviation from normalcy.

Gross, Kenneth C. (Bolingbrook, IL); Wegerich, Stephan W (Glendale Heights, IL); Singer, Ralph M. (Naperville, IL); Mott, Jack E. (Idaho Falls, ID)

2001-01-30T23:59:59.000Z

379

Advanced Containment System  

SciTech Connect

An advanced containment system for containing buried waste and associated leachate. The advanced containment system comprises a plurality of casing sections with each casing section interlocked to an adjacent casing section. Each casing section includes a complementary interlocking structure that interlocks with the complementary interlocking structure on an adjacent casing section. A barrier filler substantially fills the casing sections and may substantially fill the spaces of the complementary interlocking structure to form a substantially impermeable barrier. Some of the casing sections may include sensors so that the casing sections and the zone of interest may be remotely monitored after the casing sections are emplaced in the ground.

Kostelnik, Kevin M. (Idaho Falls, ID); Kawamura, Hideki (Tokyo, JP); Richardson, John G. (Idaho Falls, ID); Noda, Masaru (Tokyo, JP)

2005-02-08T23:59:59.000Z

380

Modern generator protection systems  

SciTech Connect

The special problems of the protection of generating stations with large machines connected to large integrated networks are presented. The coordination between the protective relays and tripping functions and the reliability of the protection scheme are important considerations in modern plants. Primary and backup protective functions, the applications, and their divisions into fault detection and ''fault prevention'' categories are considered. Testing and maintenance of the generator protection system including automatic calibration testing equipment is also discussed. The concept of the generator protection as a completely coordinated system and its realization with solid state protective relays is also presented. 9 refs.

Pencinger, C.J.

1981-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "ized system distri" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Integrated system design report  

DOE Green Energy (OSTI)

The primary objective of the integrated system test phase is to demonstrate the commercial potential of a coal fueled diesel engine in its actual operating environment. The integrated system in this project is defined as a coal fueled diesel locomotive. This locomotive, shown on drawing 41D715542, is described in the separate Concept Design Report. The test locomotive will be converted from an existing oil fueled diesel locomotive in three stages, until it nearly emulates the concept locomotive. Design drawings of locomotive components (diesel engine, locomotive, flatcar, etc.) are included.

Not Available

1989-07-01T23:59:59.000Z

382

Computation of ASR Systems  

E-Print Network (OSTI)

This paper proposes a novel technique to reduce the likelihood computation in ASR systems that use continuous density HMMs. Based on the nature of dynamic features and the numerical properties of Gaussian mixture distributions, we approximate the observation likelihood computation to achieve a speedup. Although the technique does not show appreciable benefit in an isolated word task, it yields significant improvements in continuous speech recognition. For example, 50 % of the computation can be saved on the TIMIT database with only a negligible degradation in system performanc 1

Xiao Li; Jeff Bilmes; Xiao Li; Jeff Bilmes

2003-01-01T23:59:59.000Z

383

Steam and Condensate Systems  

E-Print Network (OSTI)

In the late 60's and early 70's oil was plentiful and steam was relatively inexpensive. The switch to low sulphur fuel oil and the oil embargo suddenly changed the picture. The cost of steam rose from about $0.50 per 1,000# to $3.00 or more. Many see costs of $5.00 per 1,000# by 1980. These tremendous increases have caused steam systems, steam traps and condensate systems to become a major factor in overall plant efficiency and profit.

Yates, W.

1979-01-01T23:59:59.000Z

384

Steam and Condensate Systems  

E-Print Network (OSTI)

In the late 60's and early 70's oil was plentiful and steam was relatively inexpensive. The switch to low sulphur fuel oil and the oil embargo suddenly changed the picture. The cost of steam rose from $0.50 per 1,000# to today's cost of $4.00 or more. Many see costs of $6.00/$7.00 in the near future. These tremendous increases have caused steam systems, steam traps and condensate systems to become a major factor in overall plant efficiency and profit.

Yates, W.

1980-01-01T23:59:59.000Z

385

Cooling water distribution system  

DOE Patents (OSTI)

A passive containment cooling system for a nuclear reactor containment vessel. Disclosed is a cooling water distribution system for introducing cooling water by gravity uniformly over the outer surface of a steel containment vessel using an interconnected series of radial guide elements, a plurality of circumferential collector elements and collector boxes to collect and feed the cooling water into distribution channels extending along the curved surface of the steel containment vessel. The cooling water is uniformly distributed over the curved surface by a plurality of weirs in the distribution channels.

Orr, Richard (Pittsburgh, PA)

1994-01-01T23:59:59.000Z

386

Load sensing system  

DOE Patents (OSTI)

A load sensing system inexpensively monitors the weight and temperature of stored nuclear material for long periods of time in widely variable environments. The system can include an electrostatic load cell that encodes weight and temperature into a digital signal which is sent to a remote monitor via a coaxial cable. The same cable is used to supply the load cell with power. When multiple load cells are used, vast inventories of stored nuclear material can be continuously monitored and inventoried of minimal cost. 4 figs.

Sohns, C.W.; Nodine, R.N.; Wallace, S.A.

1999-05-04T23:59:59.000Z

387

Portable battery powered system  

SciTech Connect

In a exemplary embodiment, a battery conditioning system monitors battery conditioning and includes a memory for storing data based thereon; for example, data may be stored representative of available battery capacity as measured during a deep discharge cycle. With a microprocessor monitoring battery operation of a portable unit, a measure of remaining battery capacity can be calculated and displayed. Where the microprocessor is permanently secured to the battery so as to receive operating power therefrom during storage and handling, the performance of a given battery in actual use can be accurately judged since the battery system can itself maintain a count of accumulated hours of use and other relevant parameters.

Koenck, S. E.

1985-11-12T23:59:59.000Z

388

RADIATION DETECTOR SYSTEM  

DOE Patents (OSTI)

This patent relates to radiation detection devices and presents a unique detection system especialiy desirable for portable type instruments using a Geiger-Mueller for a high voltage battery, thereby reducing the size and weight of the instrument, by arranging a one-shot multivibrator to recharge a capacitance applying operating potential to tho Geiger-Mueller tube each time a nuclear particle is detected. When detection occurs, the multivibrator further delivers a pulse to an appropriate indicator doing away with the necessity for the pulse amplifier conventionally intermediate between the detector and indicator in pulse detection systems.

Gundlach, J.C.; Kelley, G.G.

1958-02-25T23:59:59.000Z

389

Infectious waste feed system  

DOE Patents (OSTI)

An infectious waste feed system for comminuting infectious waste and feeding the comminuted waste to a combustor automatically without the need for human intervention. The system includes a receptacle for accepting waste materials. Preferably, the receptacle includes a first and second compartment and a means for sealing the first and second compartments from the atmosphere. A shredder is disposed to comminute waste materials accepted in the receptacle to a predetermined size. A trough is disposed to receive the comminuted waste materials from the shredder. A feeding means is disposed within the trough and is movable in a first and second direction for feeding the comminuted waste materials to a combustor.

Coulthard, E. James (York, PA)

1994-01-01T23:59:59.000Z

390

Vehicle brake testing system  

SciTech Connect

This invention relates to a force measuring system capable of measuring forces associated with vehicle braking and of evaluating braking performance. The disclosure concerns an invention which comprises a first row of linearly aligned plates, a force bearing surface extending beneath and beside the plates, vertically oriented links and horizontally oriented links connecting each plate to a force bearing surface, a force measuring device in each link, a transducer coupled to each force measuring device, and a computing device coupled to receive an output signal from the transducer indicative of measured force in each force measuring device. The present invention may be used for testing vehicle brake systems.

Stevens, Samuel S [Harriman, TN; Hodgson, Jeffrey W [Lenoir City, TN

2002-11-19T23:59:59.000Z

391

Thermal Insulation Systems  

E-Print Network (OSTI)

Thermal insulation systems are receiving a high degree of attention in view of increasing energy cost. Industrial, commercial and residential energy users are all well aware of energy cost increases and great emphasis is being directed to energy cost reduction programs. One of the best places to start with energy conservation is to employ proper insulation systems. This article discusses the significant properties of thermal insulation materials primarily for industrial application. Some of the information is applicable to commercial and residential insulation. Only hot service conditions will be covered.

Stanley, T. F.

1982-01-01T23:59:59.000Z

392

Industrial process surveillance system  

DOE Patents (OSTI)

A system and method are disclosed for monitoring an industrial process and/or industrial data source. The system includes generating time varying data from industrial data sources, processing the data to obtain time correlation of the data, determining the range of data, determining learned states of normal operation and using these states to generate expected values, comparing the expected values to current actual values to identify a current state of the process closest to a learned, normal state; generating a set of modeled data, and processing the modeled data to identify a data pattern and generating an alarm upon detecting a deviation from normalcy. 96 figs.

Gross, K.C.; Wegerich, S.W.; Singer, R.M.; Mott, J.E.

1998-06-09T23:59:59.000Z

393

Hybrid powertrain system  

DOE Patents (OSTI)

A powertrain system is provided that includes a first prime mover and change-gear transmission having a first input shaft and a second input shaft. A twin clutch is disposed between the first prime mover and the transmission. The twin clutch includes a first main clutch positioned between the first prime mover and the first input shaft and a second main clutch positioned between the first prime mover and the second input shaft. The powertrain system also includes a second prime mover operably connected to one of the first and second input shafts.

Hughes, Douglas A. (Wixom, MI)

2007-09-25T23:59:59.000Z

394

Bio-inspired Political Systems  

E-Print Network (OSTI)

In this paper I consider the necessity and the possibilities of engineering bio-inspired political systems. Systems capable of harnessing the complexity of the human social systems and their increasingly growing and diversifying interactions.

Mezza-Garcia, Nathalie

2012-01-01T23:59:59.000Z

395

A Birthday Party Frame System  

E-Print Network (OSTI)

This paper is an experimental investigation of the utility of the MIT-AI frames system. Using this system, a birthday party planning system was written, representing the basic decisions that comprise such a plan as frames. ...

Clemenson, Gregory D.

396

Global optimization of hybrid systems  

E-Print Network (OSTI)

Systems that exhibit both discrete state and continuous state dynamics are called hybrid systems. In most nontrivial cases, these two aspects of system behavior interact to such a significant extent that they cannot be ...

Lee, Cha Kun

2006-01-01T23:59:59.000Z

397

Prism : an answer projection system  

E-Print Network (OSTI)

Prism is an answer projection system that combines the best attributes of traditional and Web-based question answering systems. Traditional question answering systems retrieve answers with pinpoint accuracy but limited ...

Wu, Lynn, 1981-

2003-01-01T23:59:59.000Z

398

BNL | CFN Laser System Qualifications  

NLE Websites -- All DOE Office Websites (Extended Search)

System Qualification There are multiple laser systems at the CFN. Users who will work with the following class 3b or 4 laser systems are required to complete the Laser Safety...

399

EIA 176 Query System, 2000  

U.S. Energy Information Administration (EIA)

The EIA-176 Query system is a Windows-based system which runs under Windows operating systems 95, 98, 2000, NT - 4.0 Service Pack 3 or later.

400

EIA 176 Query System, 2004  

U.S. Energy Information Administration (EIA)

The EIA-176 Query System is a Windows-based system which runs under Windows operating systems 95, 98, 2000, NT - 4.0 Service Pack 3 or later. It provides a method of ...

Note: This page contains sample records for the topic "ized system distri" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

EIA-176 Query System 2005  

U.S. Energy Information Administration (EIA)

Release Date: November 22, 2006 The EIA-176 Query System is a Windows-based system which runs under Windows operating systems 95, 98, 2000, NT - 4.0 Service Pack 3 or ...

402

----Google File System Windows IT  

E-Print Network (OSTI)

Essential ---- Google File System web Windows IT Google IT Google Google File System Google File System Datebase Google Google " " Goolge Goolge Google Google Goolge Google ()(,) Google ...... Google IT Google Google Google Google Google "Google " Google 10

403

Ash Handling System Maintenance Guide  

Science Conference Proceedings (OSTI)

This Ash Handling System Maintenance Guide provides fossil plant maintenance personnel with current maintenance information on this system. This guide will assist plant maintenance personnel in improving the reliability and reducing the maintenance costs for the ash handling system.

2005-12-23T23:59:59.000Z

404

Critical infrastructure systems of systems assessment methodology.  

Science Conference Proceedings (OSTI)

Assessing the risk of malevolent attacks against large-scale critical infrastructures requires modifications to existing methodologies that separately consider physical security and cyber security. This research has developed a risk assessment methodology that explicitly accounts for both physical and cyber security, while preserving the traditional security paradigm of detect, delay, and respond. This methodology also accounts for the condition that a facility may be able to recover from or mitigate the impact of a successful attack before serious consequences occur. The methodology uses evidence-based techniques (which are a generalization of probability theory) to evaluate the security posture of the cyber protection systems. Cyber threats are compared against cyber security posture using a category-based approach nested within a path-based analysis to determine the most vulnerable cyber attack path. The methodology summarizes the impact of a blended cyber/physical adversary attack in a conditional risk estimate where the consequence term is scaled by a ''willingness to pay'' avoidance approach.

Sholander, Peter E.; Darby, John L.; Phelan, James M.; Smith, Bryan; Wyss, Gregory Dane; Walter, Andrew; Varnado, G. Bruce; Depoy, Jennifer Mae

2006-10-01T23:59:59.000Z

405

Ovonic Hydrogen Systems LLC formerly Texaco Ovonic Hydrogen Systems LLC |  

Open Energy Info (EERE)

Hydrogen Systems LLC formerly Texaco Ovonic Hydrogen Systems LLC Hydrogen Systems LLC formerly Texaco Ovonic Hydrogen Systems LLC Jump to: navigation, search Name Ovonic Hydrogen Systems LLC (formerly Texaco Ovonic Hydrogen Systems LLC) Place Rochester Hills, Michigan Zip 48309 Sector Hydro, Hydrogen, Vehicles Product It commercializes hydrogen storage technology based on metal-hydrides for portable and stationary power systems as well as fuel-cell vehicles. References Ovonic Hydrogen Systems LLC (formerly Texaco Ovonic Hydrogen Systems LLC)[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Ovonic Hydrogen Systems LLC (formerly Texaco Ovonic Hydrogen Systems LLC) is a company located in Rochester Hills, Michigan . References

406

Hybrid Geothermal Heat Pump Systems  

Science Conference Proceedings (OSTI)

Hybrid geothermal heat pump systems offer many of the benefits of full geothermal systems but at lower installed costs. A hybrid geothermal system combines elements of a conventional water loop heat pump system in order to reduce the geothermal loop heat exchanger costs, which are probably the largest cost element of a geothermal system. These hybrid systems have been used successfully where sufficient ground space to install large heat exchangers for full geothermal options was unavailable, or where the...

2009-12-21T23:59:59.000Z

407

NREL: Energy Systems Integration - Webmaster  

NLE Websites -- All DOE Office Websites (Extended Search)

Your name: Your email address: Your message: Send Message Printable Version Energy Systems Integration Home Research & Development Energy Systems Integration Facility Working...

408

Earth System Analysis for Sustainability  

E-Print Network (OSTI)

Earth System Analysis for Sustainability By Hans JoachimSystem Analysis for Sustainability. MIT Press, Cambridge,the factors shaping sustainability yet undertaken and makes

Hamilton-Smith, Elery

2005-01-01T23:59:59.000Z

409

Energy Basics: Heat Pump Systems  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Systems Air-Source Heat Pumps Ductless Mini-Split Heat Pumps Absorption Heat Pumps Geothermal Heat Pumps Supporting Equipment for Heating & Cooling Systems Water Heating Heat...

410

Altergy Systems | Open Energy Information  

Open Energy Info (EERE)

95630 Product Designs and manufactures proprietary proton exchange membrane (PEM) fuel cell systems. References Altergy Systems1 LinkedIn Connections CrunchBase Profile No...

411

Gasification Systems Projects National Map  

NLE Websites -- All DOE Office Websites (Extended Search)

Gasification Systems Gasification Systems Projects National Map Click on a number to go to the project page. Hybrid Solar Coal Gasifier ITM Oxygen Technology for Integration in...

412

Systems biology approach to bioremediation  

E-Print Network (OSTI)

aspects of the systems biology approach (metagenomics withthe use of a number of sytems biology parameters can revealRL, Banfield JF: Systems Biology: functional analysis of

Chakraborty, R.

2013-01-01T23:59:59.000Z

413

Reliability Results of NERSC Systems  

E-Print Network (OSTI)

of various systems at NERSC. They graciously provided meReliability Results of NERSC Systems Akbar Mokhtarani,William Kramer, Jason Hick NERSC - LBNL Abstract In order to

Mokhtarani, Akbar; Petascale Data Storage Institute (PDSI)

2008-01-01T23:59:59.000Z

414

Energy Systems | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Systems Energy Systems webinarsteamtrap20100605.pdf webcast2009-0827hvacefficiency.pdf webcast2009-0820whmanagephsystems.pdf More Documents & Publications AMO Software...

415

Energy Systems | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energy Systems Energy Systems webinarsteamtrap20100605.pdf webcast2009-0827hvacefficiency.pdf webcast2009-0820whmanagephsystems.pdf More Documents & Publications New and...

416

Advanced Flow-Battery Systems  

Science Conference Proceedings (OSTI)

Presentation Title, Advanced Flow-Battery Systems ... Abstract Scope, Flow- battery systems (FBS) were originally developed over 30 years ago and have since...

417

Portable Electrochemical Sensing System - Available ...  

The device can use either a flow injection system with a mercury-film electrode or a mercury-free system involving the use of functionalized ...

418

Megtec Systems | Open Energy Information  

Open Energy Info (EERE)

Name Megtec Systems Address 830 Prosper Road Place De Pere, Wisconsin Zip 54115 Sector Carbon Product scrubbers, oxidizers, cleaners, capturing systems Phone number 1 920 336...

419

Systems Biology | More Science | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Systems Biology SHARE Systems Biology Caldicellulosiruptor obsidiansis ORNL research is examining life across scales, from the genome to the environment, to find biological...

420

DOE Systems Engineering Methodology  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Systems Engineering Methodology (SEM) In-Stage Assessment Process Guide Version 3 September 2002 U.S. Department of Energy Office of the Chief Information Officer In-Stage Assessment Process Date: September 2002 Page i Rev Date: Table of Contents Section Page 1.0 Overview .......................................................................................................................................... 1 Introduction........................................................................................................................ 1 Purpose .............................................................................................................................. 1 Who Conducts ...................................................................................................................

Note: This page contains sample records for the topic "ized system distri" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

DETECTION OR WARNING SYSTEM  

DOE Patents (OSTI)

This patent application describes a sensitive detection or protective system capable of giving an alarm or warning upon the entrance or intrusion of any body into a defined area or zone protected by a radiation field of suitable direction or extent.

Tillman, J.E.

1951-06-30T23:59:59.000Z

422

High performance systems  

SciTech Connect

This document provides a written compilation of the presentations and viewgraphs from the 1994 Conference on High Speed Computing given at the High Speed Computing Conference, {open_quotes}High Performance Systems,{close_quotes} held at Gleneden Beach, Oregon, on April 18 through 21, 1994.

Vigil, M.B. [comp.

1995-03-01T23:59:59.000Z

423

Diesel fuel filtration system  

SciTech Connect

The American nuclear utility industry is subject to tight regulations on the quality of diesel fuel that is stored at nuclear generating stations. This fuel is required to supply safety-related emergency diesel generators--the backup power systems associated with the safe shutdown of reactors. One important parameter being regulated is the level of particulate contamination in the diesel fuel. Carbon particulate is a natural byproduct of aging diesel fuel. Carbon particulate precipitates from the fuel`s hydrocarbons, then remains suspended or settles to the bottom of fuel oil storage tanks. If the carbon particulate is not removed, unacceptable levels of particulate contamination will eventually occur. The oil must be discarded or filtered. Having an outside contractor come to the plant to filter the diesel fuel can be costly and time consuming. Time is an even more critical factor if a nuclear plant is in a Limiting Condition of Operation (LCO) situation. A most effective way to reduce both cost and risk is for a utility to build and install its own diesel fuel filtration system. The cost savings associated with designing, fabricating and operating the system inhouse can be significant, and the value of reducing the risk of reactor shutdown because of uncertified diesel fuel may be even higher. This article describes such a fuel filtering system.

Schneider, D. [Wisconsin Fuel and Light, Wausau, WI (United States)

1996-03-01T23:59:59.000Z

424

Environmental Compliance Management System  

SciTech Connect

Argonne National Laboratory (ANL) is developing the Environmental Compliance Management System (ECMS) as a comprehensive, cost-effective tool to ensure (1) that the Laboratory complies with all applicable federal and state environmental laws and regulations, (2) that environmental issues and concerns are recognized and considered in the early phases of projects; and (3) that Laboratory personnel conduct Laboratory operations in the most environmentally acceptable manner. The ECMS is an expert computer system which is designed to allow project engineers to perform an environmental evaluation of their projects. The system includes a Master Program which collects basic project information, provide utility functions, and access the environmental expert modules, environmental expert system modules for each federal and state environmental law which allows the user to obtain specific information on how an individual law may affect his project; and site-specific databases which contain information necessary for effective management of the site under environmental regulations. The ECMS will have the capability to complete and print many of the necessary environmental forms required by federal and state agencies, including the Department of Energy.

Brownson, L.W.; Krsul, T.; Peralta, R.A. [Argonne National Lab., Idaho Falls, ID (United States); Knudson, D.A.; Rosignolo, C.L. [Argonne National Lab., IL (United States)

1992-09-01T23:59:59.000Z

425

Environmental Compliance Management System  

SciTech Connect

Argonne National Laboratory (ANL) is developing the Environmental Compliance Management System (ECMS) as a comprehensive, cost-effective tool to ensure (1) that the Laboratory complies with all applicable federal and state environmental laws and regulations, (2) that environmental issues and concerns are recognized and considered in the early phases of projects; and (3) that Laboratory personnel conduct Laboratory operations in the most environmentally acceptable manner. The ECMS is an expert computer system which is designed to allow project engineers to perform an environmental evaluation of their projects. The system includes a Master Program which collects basic project information, provide utility functions, and access the environmental expert modules, environmental expert system modules for each federal and state environmental law which allows the user to obtain specific information on how an individual law may affect his project; and site-specific databases which contain information necessary for effective management of the site under environmental regulations. The ECMS will have the capability to complete and print many of the necessary environmental forms required by federal and state agencies, including the Department of Energy.

Brownson, L.W.; Krsul, T.; Peralta, R.A. (Argonne National Lab., Idaho Falls, ID (United States)); Knudson, D.A.; Rosignolo, C.L. (Argonne National Lab., IL (United States))

1992-01-01T23:59:59.000Z

426

Thermal neutron detection system  

DOE Patents (OSTI)

According to the present invention, a system for measuring a thermal neutron emission from a neutron source, has a reflector/moderator proximate the neutron source that reflects and moderates neutrons from the neutron source. The reflector/moderator further directs thermal neutrons toward an unmoderated thermal neutron detector.

Peurrung, Anthony J. (Richland, WA); Stromswold, David C. (West Richland, WA)

2000-01-01T23:59:59.000Z

427

Hot water supply system  

SciTech Connect

A hot water supply system is described which consists of: a boiler having an exhaust; solar panels; and a frame supporting the solar panels and including a compartment beneath the solar panels, the boiler exhaust termining in the compartment beneath the solar panels, the boiler being within the compartment.

Piper, J.R.

1986-06-10T23:59:59.000Z

428

Cooling Water System Optimization  

E-Print Network (OSTI)

During summer months, many manufacturing plants have to cut back in rates because the cooling water system is not providing sufficient cooling to support higher production rates. There are many low/no-cost techniques available to improve tower performance. To understand the importance of the optimization techniques, cooling tower theory will be discussed first.

Aegerter, R.

2005-01-01T23:59:59.000Z

429

Nuclear criticality information system  

SciTech Connect

The nuclear criticality safety program at LLNL began in the 1950's with a critical measurements program which produced benchmark data until the late 1960's. This same time period saw the rapid development of computer technology useful for both computer modeling of fissile systems and for computer-aided management and display of the computational benchmark data. Database management grew in importance as the amount of information increased and as experimental programs were terminated. Within the criticality safety program at LLNL we began at that time to develop a computer library of benchmark data for validation of computer codes and cross sections. As part of this effort, we prepared a computer-based bibliography of criticality measurements on relatively simple systems. However, it is only now that some of these computer-based resources can be made available to the nuclear criticality safety community at large. This technology transfer is being accomplished by the DOE Technology Information System (TIS), a dedicated, advanced information system. The NCIS database is described.

Koponen, B.L.; Hampel, V.E.

1981-11-30T23:59:59.000Z

430

Precooler Ring Vacuum System  

DOE Green Energy (OSTI)

The precooler vacuum system, as proposed by FNAL, is based on a suitable modification of the existing Electron Cooling Ring System. Because of the magnetic cycle of the bending magnets, distributed ion pumping, as exists in the Electron Cooling Ring, is not applicable. Instead, the proposed pumping will be done with commercial appendage ion pumps mounted approximately every two meters around the circumference of the ring. The loss of effective pumping speed and non-uniformity of system pressure with appendage pumps may not be major considerations but the large number required does effect experimental and analytical equipment placement considerations. There is a distributed pumping technique available which: (1) is not affected by the magnetic cycle of the bending magnets; (2) will provide a minimum of four times the hydrogen pumping speed of the proposed appendage ion pumps; (3) will require no power during pumping after the strip is activated; (4) will provide the heat source for bakeout; (5) is easily replaceable; and (6) can be purchased, installed, and operated at a generous economic advantage over the presently proposed ion pumped system. The pumping technique referred to is non-evaporable gettering with ST101 Zr/Al pumping strip. A technical description of this pumping strip is given on Data Sheet 1 and 2 attached to this report.

Moenich, J.

1980-10-02T23:59:59.000Z

431

Btschli dynamic droplet system  

Science Conference Proceedings (OSTI)

Dynamical oil-water systems such as droplets display lifelike properties and may lend themselves to chemical programming to perform useful work, specifically with respect to the built environment. We present Btschli water-in-oil droplets as a model ... Keywords: Otto Btschli, architecture, droplet, living technology, olive oil, origins of life

Rachel Armstrong; Martin Hanczyc

2013-10-01T23:59:59.000Z

432

Anaerobic thermophilic culture system  

DOE Patents (OSTI)

A mixed culture system of the newly discovered microorganism Thermoanaerobacter ethanolicus ATCC31550 and the microorganism Clostridium thermocellum ATCC31549 is described. In a mixed nutrient culture medium that contains cellulose, these microorganisms have been coupled and cultivated to efficiently ferment cellulose to produce recoverable quantities of ethanol under anaerobic, thermophilic conditions.

Ljungdahl, Lars G. (Athens, GA); Wiegel, Jurgen K. W. (Gottingen, DE)

1981-01-01T23:59:59.000Z

433

BLOWER SYSTEM DYNAMICS  

SciTech Connect

An analysis is presented of the dynamics of a turboblower acting together with its connecting circuit. This is to be distinguished from the aero- thermodynamics involved in the design of the blower itself. The effect on system stability of blower and circuit characteristics is discussed. (auth)

Furgerson, W.T.

1958-04-16T23:59:59.000Z

434

Superconductivity for Electric Systems  

E-Print Network (OSTI)

and Energy Reliability ­ Superconductivity for Electric Systems #12;3 Control Milestones and Status Control Milestone Due Date Status Section 1.1: Wire Development. · Short sample RABiTS using slot-die MOD CeO2 cap manufacturing process. Highlights: 1) HTS Program CPS Control Milestone Met - Short sample RABiTS using slot

435

Improved vortex reactor system  

DOE Patents (OSTI)

An improved vortex reactor system for affecting fast pyrolysis of biomass and Refuse Derived Fuel (RDF) feed materials comprising: a vortex reactor having its axis vertically disposed in relation to a jet of a horizontally disposed steam ejector that impels feed materials from a feeder and solids from a recycle loop along with a motive gas into a top part of said reactor.

Diebold, James P. (Lakewood, CO); Scahill, John W. (Evergreen, CO)

1995-01-01T23:59:59.000Z

436

Vehicle fuel system  

DOE Patents (OSTI)

A vehicle fuel system comprising a plurality of tanks, each tank having a feed and a return conduit extending into a lower portion thereof, the several feed conduits joined to form one supply conduit feeding fuel to a supply pump and using means, unused fuel being returned via a return conduit which branches off to the several return conduits.

Risse, John T. (Albuquerque, NM); Taggart, James C. (Albuquerque, NM)

1976-01-01T23:59:59.000Z

437

Line focus systems.  

DOE Green Energy (OSTI)

Improving the thermal performance of a trough plant will lower the LCOE: (1) Improve mirror alignment using the TOPCAT system - Current - increase optical intercept of existing trough solar power plants, Future - allows larger apertures with same receiver size in new trough solar power plants, and Increased concentration ratios/collection efficiencies & economies of scale; and (2) Improve tracking using a closed loop tracking system - Open loop tracking currently used own experience and from industry show need for a improved method. Performance testing of a Trough module and/or receiver on the rotating platform: (1) Installed costs of a trough plant are high. A significant portion of this is the material and assembly cost of the trough module. These costs need to be reduced without sacrificing performance; and (2) New receiver coatings with lower heat loss and higher absorbtivity. TOPCAT system is an optical evaluation tool for parabolic trough solar collectors. Aspects of the TOPCAT system are: (1) Practical, rapid, and cost effective; (2) Inherently aligns mirrors to the receiver of an entire solar collector array (SCA); (3) Can be used for existing installations -no equivalent tool exits; (4) Can be used during production; (5) Currently can be used on LS-2 or LS-3 configurations, but can be easily modified for any configuration; and (6)Generally, one time use.

Moss, Timothy A.

2010-05-01T23:59:59.000Z

438

Helium dilution refrigeration system  

DOE Patents (OSTI)

A helium dilution refrigeration system operable over a limited time period, and recyclable for a next period of operation is disclosed. The refrigeration system is compact with a self-contained pumping system and heaters for operation of the system. A mixing chamber contains [sup 3]He and [sup 4]He liquids which are precooled by a coupled container containing [sup 3]He liquid, enabling the phase separation of a [sup 3]He rich liquid phase from a dilute [sup 3]He-[sup 4]He liquid phase which leads to the final stage of a dilution cooling process for obtaining low temperatures. The mixing chamber and a still are coupled by a fluid line and are maintained at substantially the same level with the still cross sectional area being smaller than that of the mixing chamber. This configuration provides maximum cooling power and efficiency by the cooling period ending when the [sup 3]He liquid is depleted from the mixing chamber with the mixing chamber nearly empty of liquid helium, thus avoiding unnecessary and inefficient cooling of a large amount of the dilute [sup 3]He-[sup 4]He liquid phase. 2 figs.

Roach, P.R.; Gray, K.E.

1988-09-13T23:59:59.000Z

439

Battery charging system  

SciTech Connect

A battery charging system designed to charge a battery, especially a nickel-cadmium (Ni-cd) battery from a lead acid power supply without overcharging, and to charge uniformly a plurality of batteries in parallel is described. A non-linear resistance is utilized and is matched to the voltage difference of the power supply battery and the batteries being charged.

Komatsu, K.; Mabuchi, K.

1982-01-19T23:59:59.000Z

440

Battery charging system  

SciTech Connect

A highly efficient battery charging system is described in which the amperehour discharge of the battery is sensed for controlling the battery charging rate. The battery is charged at a relatively high charge rate during a first time period proportional to the extent of battery discharge and at a second lower rate thereafter.

Bilsky, H.W.; Callen, P.J.

1982-01-26T23:59:59.000Z

Note: This page contains sample records for the topic "ized system distri" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Steam System Optimization  

E-Print Network (OSTI)

Refinery and chemical plant steam systems are complex and the fuel required to produce the steam represents a major expense. The incremental cost for generating a 1,000 lb./hr. of steam is typically $45,000 - $60,000/year. Most plants have numerous low/

Aegerter, R.

2004-01-01T23:59:59.000Z

442

Energy monitoring system  

SciTech Connect

A system for monitoring and displaying the consumption of energy by measuring the actual energy consumed and comparing the measured energy consumption with an ideal or desired energy consumption. The desired energy consumption data may be based upon actual operations or may be generated by ideal consumption characteristics. In some instances, the ideal figures may be modified to compensate for variations in external conditions.

Bertolasi, R.B.

1976-12-21T23:59:59.000Z

443

Advanced synchronous luminescence system  

DOE Patents (OSTI)

A method and apparatus are disclosed for determining the condition of tissue or otherwise making chemical identifications includes exposing the sample to a light source, and using a synchronous luminescence system to produce a spectrum that can be analyzed for tissue condition. 14 figs.

Vo-Dinh, T.

1997-02-04T23:59:59.000Z

444

Modular Integrated Energy Systems  

E-Print Network (OSTI)

of Honeywell's data collection activity for the integrated energy system (or CHP -- Cooling, Heat and Power recovery steam generator, and a waste heat fired absorption chiller. The key goals of the project are having on-line optimization, · Develop a 1000 Ton exhaust-driven absorption chiller, · Install

Oak Ridge National Laboratory

445

Near Tank Treatment System  

Hanford High Level Waste: S/SX Tanks TEM Images of Actual Waste Boehmite 7 (a) 0.2 m (b) 0.2 m (c) 0.5 m (d) 0.2 m U and Mn particles . Near Tank Treatment System

446

Power Systems Advanced Research  

DOE Green Energy (OSTI)

In the 17 quarters of the project, we have accomplished the following milestones - first, construction of the three multiwavelength laser scattering machines for different light scattering study purposes; second, build up of simulation software package for simulation of field and laboratory particulates matters data; third, carried out field online test on exhaust from combustion engines with our laser scatter system. This report gives a summary of the results and achievements during the project's 16 quarters period. During the 16 quarters of this project, we constructed three multiwavelength scattering instruments for PM2.5 particulates. We build up a simulation software package that could automate the simulation of light scattering for different combinations of particulate matters. At the field test site with our partner, Alturdyne, Inc., we collected light scattering data for a small gas turbine engine. We also included the experimental data feedback function to the simulation software to match simulation with real field data. The PM scattering instruments developed in this project involve the development of some core hardware technologies, including fast gated CCD system, accurately triggered Passively Q-Switched diode pumped lasers, and multiwavelength beam combination system. To calibrate the scattering results for liquid samples, we also developed the calibration system which includes liquid PM generator and size sorting instrument, i.e. MOUDI. In this report, we give the concise summary report on each of these subsystems development results.

California Institute of Technology

2007-03-31T23:59:59.000Z

447

Networked Aquatic Sampling System  

E-Print Network (OSTI)

system for field operation Wireless 802.11b based networkOperation Continuous real time data acquisition and logging of pertinent environmental parameters WirelessOperation Network of 10 static nodes and 1 robotic boat AODV based ad-hoc 802.11b wireless

2005-01-01T23:59:59.000Z

448

RFQ accelerator tuning system  

DOE Patents (OSTI)

A cooling system is provided for maintaining a preselected operating temperature in a device, which may be an RFQ accelerator, having a variable heat removal requirement, by circulating a cooling fluid through a cooling system remote from the device. Internal sensors in the device enable an estimated error signal to be generated from parameters which are indicative of the heat removal requirement from the device. Sensors are provided at predetermined locations in the cooling system for outputting operational temperature signals. Analog and digital computers define a control signal functionally related to the temperature signals and the estimated error signal, where the control signal is defined effective to return the device to the preselected operating temperature in a stable manner. The cooling system includes a first heat sink responsive to a first portion of the control signal to remove heat from a major portion of the circulating fluid. A second heat sink is responsive to a second portion of the control signal to remove heat from a minor portion of the circulating fluid. The cooled major and minor portions of the circulating fluid are mixed in response to a mixing portion of the control signal, which is effective to proportion the major and minor portions of the circulating fluid to establish a mixed fluid temperature which is effective to define the preselected operating temperature for the remote device. In an RFQ environment the stable temperature control enables the resonant frequency of the device to be maintained at substantially a predetermined value during transient operations.

Bolie, Victor W. (Albuquerque, NM)

1990-01-01T23:59:59.000Z

449

Hawaii electric system reliability.  

SciTech Connect

This report addresses Hawaii electric system reliability issues; greater emphasis is placed on short-term reliability but resource adequacy is reviewed in reference to electric consumers' views of reliability "worth" and the reserve capacity required to deliver that value. The report begins with a description of the Hawaii electric system to the extent permitted by publicly available data. Electrical engineering literature in the area of electric reliability is researched and briefly reviewed. North American Electric Reliability Corporation standards and measures for generation and transmission are reviewed and identified as to their appropriateness for various portions of the electric grid and for application in Hawaii. Analysis of frequency data supplied by the State of Hawaii Public Utilities Commission is presented together with comparison and contrast of performance of each of the systems for two years, 2010 and 2011. Literature tracing the development of reliability economics is reviewed and referenced. A method is explained for integrating system cost with outage cost to determine the optimal resource adequacy given customers' views of the value contributed by reliable electric supply. The report concludes with findings and recommendations for reliability in the State of Hawaii.

Silva Monroy, Cesar Augusto; Loose, Verne William

2012-09-01T23:59:59.000Z

450

NUCLEAR REACTOR CONTROL SYSTEM  

DOE Patents (OSTI)

A control system is described for a nuclear reactor using enriched uranium fuel of the type of the swimming pool and other heterogeneous nuclear reactors. Circuits are included for automatically removing and inserting the control rods during the course of normal operation. Appropriate safety circuits close down the nuclear reactor in the event of emergency.

Epler, E.P.; Hanauer, S.H.; Oakes, L.C.

1959-11-01T23:59:59.000Z

451

Force Modulator System  

SciTech Connect

Many metal parts manufacturers use large metal presses to shape sheet metal into finished products like car body parts, jet wing and fuselage surfaces, etc. These metal presses take sheet metal and - with enormous force - reshape the metal into a fully formed part in a manner of seconds. Although highly efficient, the forces involved in forming metal parts also damage the press itself, limit the metals used in part production, slow press operations and, when not properly controlled, cause the manufacture of large volumes of defective metal parts. To date, the metal-forming industry has not been able to develop a metal-holding technology that allows full control of press forces during the part forming process. This is of particular importance in the automotive lightweighting efforts under way in the US automotive manufacturing marketplace. Metalforming Controls Technology Inc. (MC2) has developed a patented press control system called the Force Modulator that has the ability to control these press forces, allowing a breakthrough in stamping process control. The technology includes a series of hydraulic cylinders that provide controlled tonnage at all points in the forming process. At the same time, the unique cylinder design allows for the generation of very high levels of clamping forces (very high tonnages) in very small spaces; a requirement for forming medium and large panels out of HSS and AHSS. Successful production application of these systems testing at multiple stamping operations - including Ford and Chrysler - has validated the capabilities and economic benefits of the system. Although this technology has been adopted in a number of stamping operations, one of the primary barriers to faster adoption and application of this technology in HSS projects is system cost. The cost issue has surfaced because the systems currently in use are built for each individual die as a custom application, thus driving higher tooling costs. This project proposed to better marry the die-specific Force Modulator technology with stamping presses in the form of a press cushion. This system would be designed to operate the binder ring for multiple parts, thus cutting the per-die cost of the technology. This study reports the results of technology field application. This project produced the following conclusions: (1) The Force Modulator system is capable of operating at very high tempos in the stamping environment; (2) The company can generate substantial, controlled holding tonnage (binder ring pressure) necessary to hold high strength steel parts for proper formation during draw operations; (3) A single system can be designed to operate with a family of parts, thus significantly reducing the per-die cost of a FM system; (4) High strength steel parts made with these systems appear to show significant quality improvements; (5) The amounts of steel required to make these parts is typically less than the amounts required with traditional blank-holding technologies; and (6) This technology will aid in the use of higher strength steels in auto and truck production, thus reducing weight and improving fuel efficiency.

Redmond Clark

2009-04-30T23:59:59.000Z

452

Tree transport system  

NLE Websites -- All DOE Office Websites (Extended Search)

Tree transport system Tree transport system Name: Paul K Harding Location: N/A Country: N/A Date: N/A Question: How can trees get that tall? How can the transport of water function that good? Normally one could think that trees can get only 10 m high because then the pressure of the air would be to weak to transport the water and a vacuum would occur. Or do trees use a system of one pump-system after another to solve that problem? Replies: Okay, the answer is two-fold. One, the column of water travelling up the trunk of the tree is only a couple of molecules wide, moving up from cell to cell. You can think of each cell as a "valve" if you will, holding the water and keeping it from flowing down the trunk (unless you WANT it to go that way, in the case of sugar laden water moving to storage areas in the roots) until it can be moved to the next cell up, and so on and so on. The second part involves diffusion. Cells can diffuse certain chemical compounds through their cell walls while simultaneously holding onto others. By having a gradient of increasing chemical concentration as you go up the trunk, you can cause a gradual diffusion of water up the trunk (since water travels relatively freely through the cell walls) and thereby creates and exception to the rule of 10 meters being the maximum height for a column of water -- you've effectively added energy to the system to "pump" water up the trunk.

453

VME system monitor board  

SciTech Connect

Much of the machinery throughout the APS will be controlled by VME based computers. In order to increase the reliability of the system, it is necessary to be able to monitor the status of each VME crate. In order to do this, a VME System Monitor was created. In addition to being able to monitor and report the status (watchdog timer, temperature, CPU (Motorola MVME 167) state (status, run, fail), and the power supply), it includes provisions to remotely reset the CPU and VME crate, digital I/O, and parts of the transition module (serial port and ethernet connector) so that the Motorla MVME 712 is not needed. The standard VME interface was modified on the System Monitor so that in conjunction with the Motorola MVME 167 a message based VXI interrupt handler could is implemented. The System Monitor is a single VME card (6U). It utilizes both the front panel and the P2 connector for I/O. The front panel contains a temperature monitor, watchdog status LED, 4 general status LEDs, input for a TTL interrupt, 8 binary inputs (24 volt, 5 volt, and dry contact sense), 4 binary outputs (dry contact, TTL, and 100 mA), serial port (electrical RS-232 or fiber optic), ethernet transceiver (10 BASE-FO or AUI), and a status link to neighbor crates. The P2 connector is used to provide the serial port and ethernet to the processor. In order to abort and read the status of the CPU, a jumper cable must be connected between the CPU and the System Monitor.

NONE

1996-02-01T23:59:59.000Z

454

Purdue Hydrogen Systems Laboratory  

DOE Green Energy (OSTI)

The Hydrogen Systems Laboratory in a unique partnership between Purdue University's main campus in West Lafayette and the Calumet campus was established and its capabilities were enhanced towards technology demonstrators. The laboratory engaged in basic research in hydrogen production and storage and initiated engineering systems research with performance goals established as per the USDOE Hydrogen, Fuel Cells, and Infrastructure Technologies Program. In the chemical storage and recycling part of the project, we worked towards maximum recycling yield via novel chemical selection and novel recycling pathways. With the basic potential of a large hydrogen yield from AB, we used it as an example chemical but have also discovered its limitations. Further, we discovered alternate storage chemicals that appear to have advantages over AB. We improved the slurry hydrolysis approach by using advanced slurry/solution mixing techniques. We demonstrated vehicle scale aqueous and non-aqueous slurry reactors to address various engineering issues in on-board chemical hydrogen storage systems. We measured the thermal properties of raw and spent AB. Further, we conducted experiments to determine reaction mechanisms and kinetics of hydrothermolysis in hydride-rich solutions and slurries. We also developed a continuous flow reactor and a laboratory scale fuel cell power generation system. The biological hydrogen production work summarized as Task 4.0 below, included investigating optimal hydrogen production cultures for different substrates, reducing the water content in the substrate, and integrating results from vacuum tube solar collector based pre and post processing tests into an enhanced energy system model. An automated testing device was used to finalize optimal hydrogen production conditions using statistical procedures. A 3 L commercial fermentor (New Brunswick, BioFlo 115) was used to finalize testing of larger samples and to consider issues related to scale up. Efforts continued to explore existing catalytic methods involving nano catalysts for capture of CO2 from the fermentation process.

Jay P Gore; Robert Kramer; Timothee L Pourpoint; P. V. Ramachandran; Arvind Varma; Yuan Zheng

2011-12-28T23:59:59.000Z

455

Socio-technical systems: From design methods to systems engineering  

Science Conference Proceedings (OSTI)

It is widely acknowledged that adopting a socio-technical approach to system development leads to systems that are more acceptable to end users and deliver better value to stakeholders. Despite this, such approaches are not widely practised. We analyse ... Keywords: Socio-technical systems, Software engineering, Systems engineering

Gordon Baxter; Ian Sommerville

2011-01-01T23:59:59.000Z

456

Control system for heat exchangers fans in a refrigeration system  

Science Conference Proceedings (OSTI)

The paper presents a method for controlling evaporator and condenser fans in a refrigeration system. The refrigeration system includes a refrigerant circuit defined by a compressor, a condenser, a throttling device, and an evaporator. The system includes ... Keywords: controlling, fan, refrigeration system, variable frequency drive unit

Cristian Iosifescu; Valeriu Damian; C?lin Ciufudean

2010-05-01T23:59:59.000Z

457

SystemJ: A GALS language for system level design  

Science Conference Proceedings (OSTI)

In this paper we present the syntax, semantics, and compilation of a new system-level programming language called SystemJ. SystemJ is a multiclock language supporting the Globally Asynchronous Locally Synchronous (GALS) model of computation. The synchronous ... Keywords: Compilation, Computer languages, Embedded systems, GALS languages, Reactive languages, Semantics, Synchronous languages

Avinash Malik; Zoran Salcic; Partha S. Roop; Alain Girault

2010-12-01T23:59:59.000Z

458

Advanced Manufacturing Office: Motor Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Motor Systems to Motor Systems to someone by E-mail Share Advanced Manufacturing Office: Motor Systems on Facebook Tweet about Advanced Manufacturing Office: Motor Systems on Twitter Bookmark Advanced Manufacturing Office: Motor Systems on Google Bookmark Advanced Manufacturing Office: Motor Systems on Delicious Rank Advanced Manufacturing Office: Motor Systems on Digg Find More places to share Advanced Manufacturing Office: Motor Systems on AddThis.com... Quick Links Energy Resource Center Technical Publications by Energy System Energy-Efficient Technologies Incentives & Resources by Zip Code Better Plants Superior Energy Performance Contacts Motor Systems Photo of Man Checking Motor Performance Motor-driven equipment accounts for 54% of manufacturing electricity use. Dramatic energy and cost savings can be achieved in motor systems by

459

Cumberland System | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Cumberland System Cumberland System Cumberland System October 1, 2011 CTVI-1-A Wholesale Power Rate Schedule Area: Former customers of TVA System: Cumberland October 1, 2011 CTV-1-H Wholesale Power Rate Schedule Area: TVA System: CU October 1, 2011 CM-1-H Wholesale Power Rate Schedule Area: MEAM, MDEA, and SMEPA System: CU October 1, 2011 CBR-1-H Wholesale Power Rate Schedule Area: Big Rivers and Henderson, KY System: CU October 1, 2011 CSI-1-H Wholesale Power Rate Schedule Area: Southern Illinois System: CU October 1, 2011 CK-1-H Wholesale Power Rate Schedule Area: KU Area System: CU October 1, 2011 CEK-1-H Wholesale Power Rate Schedule Area: East Kentucky System: CU October 1, 2011 CC-1-I Wholesale Power Rate Schedule Area: CP&L Area, Western Division System: CU October 1, 2008 Replacement-3 Wholesale Power Rate Schedule

460

Mathematical structure of unit systems  

E-Print Network (OSTI)

We investigate the mathematical structure of unit systems and the relations between them. Looking over the entire set of unit systems, we can find a mathematical structure that is called preorder (or quasi-order). For some pair of unit systems, there exists a relation of preorder such that one unit system is transferable to the other unit system. The transfer (or conversion) is possible only when all of the quantities distinguishable in the latter system are always distinguishable in the former system. By utilizing this structure, we can systematically compare the representations in different unit systems. Especially, the equivalence class of unit systems (EUS) plays an important role because the representations of physical quantities and equations are of the same form in unit systems belonging to an EUS. The dimension of quantities is uniquely defined in each EUS. The EUS's form a partially ordered set. Using these mathematical structures, unit systems and EUS's are systematically classified and organized as a hierarchical tree.

Masao Kitano

2013-05-04T23:59:59.000Z

Note: This page contains sample records for the topic "ized system distri" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Optics Supply Planning System  

Science Conference Proceedings (OSTI)

The purpose of this study is to specify the design for an initial optics supply planning system for NIF, and to present quality assurance and test plans for the construction of the system as specified. The National Ignition Facility (NIF) is a large laser facility that is just starting operations. Thousands of specialized optics are required to operate the laser, and must be exchanged over time based on the laser shot plan and predictions of damage. Careful planning and tracking of optic exchanges is necessary because of the tight inventory of spare optics, and the long lead times for optics procurements and production changes. Automated inventory forecasting and production planning tools are required to replace existing manual processes. The optics groups members who are expected to use the supply planning system are the stakeholders for this project, and are divided into three groups. Each of these groups participated in a requirements specification that was used to develop this design. (1) Optics Management--These are the top level stakeholdersk, and the final decision makers. This group is the interface to shot operations, is ultimately responsible for optics supply, and decides which exchanges will be made. (2) Work Center Managers--This group manages the on site optics processing work centers. They schedule the daily work center operations, and are responsible for developing long term processing, equipment, and staffing plans. (3) Component Engineers--This group manages the vendor contracts for the manufacture of new optics and the off site rework of existing optics. They are responsible for sourcing vendors, negotiating contracts, and managing vendor processes. The scope of this analysis is to describe the structure and design details of a system that will meet all requirements that were described by stakeholders and documented in the analysis model for this project. The design specifies the architecture, components, interfaces, and data stores of the system at a level of detail that can be used for construction and deployment. Test and quality assurance plans are also included to insure that the system delivers all requirements when it is built. The design is for an automated forecasting prototype that allocates inventory and processing resources in response to potentially daily changes in the forecasted optics exchanges required to operate NIF. It will automatically calculate future inventory levels and processing rates based on current inventory and projected exchanges, procurements, and capacities. It will include screens that allow users to readily assess the feasibility of the forecast, identify failures to meet the demand, revise input data, and re-run the automated forecast calculation. In addition, the system will automatically retrieve the current exchange demand from an external database. Approved forecasts from the system will automatically update work order plans and procurement plans in the existing inventory and production control database. The timing of optics exchanges affects the forecast of damage and future exchanges, so an approved exchange plan will be fed back to the demand database and be used to calculate the next demand projection. The system will read the demand data and update the forecast and output files daily. This specification has been divided into two parts. This document, Part 1 lays out the major design decisions and specifies the architectural, component, and data structure designs. Part 2 will add interface designs, quality assurance and testing plans, and deployment details.

Gaylord, J

2009-04-30T23:59:59.000Z

462

Plutonium Immobilization Project System Design Description for Can Loading System  

Science Conference Proceedings (OSTI)

The purpose of this System Design Description (SDD) is to specify the system and component functions and requirements for the Can Loading System and provide a complete description of the system (design features, boundaries, and interfaces), principles of operation (including upsets and recovery), and the system maintenance approach. The Plutonium Immobilization Project (PIP) will immobilize up to 13 metric tons (MT) of U.S. surplus weapons usable plutonium materials.

Kriikku, E.

2001-02-15T23:59:59.000Z

463

Transportation System Concept of Operations  

Science Conference Proceedings (OSTI)

The Nuclear Waste Policy Act of 1982 (NWPA), as amended, authorized the DOE to develop and manage a Federal system for the disposal of SNF and HLW. OCRWM was created to manage acceptance and disposal of SNF and HLW in a manner that protects public health, safety, and the environment; enhances national and energy security; and merits public confidence. This responsibility includes managing the transportation of SNF and HLW from origin sites to the Repository for disposal. The Transportation System Concept of Operations is the core high-level OCRWM document written to describe the Transportation System integrated design and present the vision, mission, and goals for Transportation System operations. By defining the functions, processes, and critical interfaces of this system early in the system development phase, programmatic risks are minimized, system costs are contained, and system operations are better managed, safer, and more secure. This document also facilitates discussions and understanding among parties responsible for the design, development, and operation of the Transportation System. Such understanding is important for the timely development of system requirements and identification of system interfaces. Information provided in the Transportation System Concept of Operations includes: the functions and key components of the Transportation System; system component interactions; flows of information within the system; the general operating sequences; and the internal and external factors affecting transportation operations. The Transportation System Concept of Operations reflects OCRWM's overall waste management system policies and mission objectives, and as such provides a description of the preferred state of system operation. The description of general Transportation System operating functions in the Transportation System Concept of Operations is the first step in the OCRWM systems engineering process, establishing the starting point for the lower level descriptions. of subsystems and components, and the Transportation System Requirements Document. Other program and system documents, plans, instructions, and detailed designs will be consistent with and informed by the Transportation System Concept of Operations. The Transportation System Concept of Operations is a living document, enduring throughout the OCRWM systems engineering lifecycle. It will undergo formal approval and controlled revisions as appropriate while the Transportation System matures. Revisions will take into account new policy decisions, new information available through system modeling, engineering investigations, technical analyses and tests, and the introduction of new technologies that can demonstrably improve system performance.

N. Slater-Thompson

2006-08-16T23:59:59.000Z

464

Alternate Water Supply System  

Office of Legacy Management (LM)

Alternate Water Supply Alternate Water Supply System Flushing Report Riverton, Wyoming, Processing Site January 2008 Office of Legacy Management DOE M/1570 2008 - -L Work Performed Under DOE Contract No. for the U.S. Department of Energy Office of Legacy Management. DE-AC01-02GJ79491 Approved for public release; distribution is unlimited. Office of Legacy Management Office of Legacy Management Office of Legacy Management U.S. Department of Energy This page intentionally left blank DOE-LM/1570-2008 Alternate Water Supply System Flushing Report Riverton, Wyoming, Processing Site January 2008 Work Performed by S.M. Stoller Corporation under DOE Contract No. DE-AC01-02GJ79491 for the U.S. Department of Energy Office of Legacy Management, Grand Junction, Colorado This page intentionally left blank

465

Electrical system architecture  

DOE Patents (OSTI)

An electrical system for a vehicle includes a first power source generating a first voltage level, the first power source being in electrical communication with a first bus. A second power source generates a second voltage level greater than the first voltage level, the second power source being in electrical communication with a second bus. A starter generator may be configured to provide power to at least one of the first bus and the second bus, and at least one additional power source may be configured to provide power to at least one of the first bus and the second bus. The electrical system also includes at least one power consumer in electrical communication with the first bus and at least one power consumer in electrical communication with the second bus.

Algrain, Marcelo C. (Peoria, IL); Johnson, Kris W. (Washington, IL); Akasam, Sivaprasad (Peoria, IL); Hoff, Brian D. (East Peoria, IL)

2008-07-15T23:59:59.000Z

466

Work Authorization System  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Washington, D.C. DOE O 412.1A Approved: 4-21-05 This directive was reviewed and certified as current and necessary by Susan J. Grant, Director, Office of Management, Budget and Evaluation/Chief Financial Officer, 4-21-05. SUBJECT: WORK AUTHORIZATION SYSTEM 1. OBJECTIVES. To establish a work authorization and control process for work performed by designated site and facility management contractors, and other contractors as determined by the procurement executive, consistent with the budget execution and program evaluation requirements of the Department of Energy's (DOE's) Planning, Programming, Budgeting, and Evaluation process. 2. CANCELLATIONS. DOE O 412.1 Work Authorization System, dated 4-20-99. Cancellation of a directive does not, by itself, modify or otherwise affect any contractual

467

CONTRACTOR PURCHASING SYSTEM REVIEWS  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Page 1 Page 1 APPENDIX C CONTRACTOR PURCHASING SYSTEM REVIEWS RISK ASSESSMENT MATRIX RISK CATEGORY PERFORMANCE SCHEDULE COST HIGH (3) --Performance data casts significant doubt on the ability of the system or key process ability to meet requirements. A major disruption is highly probable and the likelihood is that the supplier will not achieve the performance, schedule or cost objectives · Delinquent end item delivery · Poor or nonexistent internal audit/self governance · Failure to meet socio-economic subcontract goals · Frequent overruns · Inadequate incoming inspection methods · Frequent late supplier deliveries<80% · Inadequate lead time provided to ensure on-time delivery of critical items · Inadequate subcontract

468

Whole Building Ventilation Systems  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Whole-Building Whole-Building Ventilation Systems for Existing Homes © 2011 Steven Winter Associates, Inc. All rights reserved. © 2011 Steven Winter Associates, Inc. All rights reserved. Home Performance / Weatherization  Addressing ventilation is the exception  Max tightness, e.g. BPI's "Building Airflow Standard" (BAS)  References ASHRAE 62-89  BAS = Max [0.35 ACH, 15 CFM/person], CFM50 eq.  If BD tests show natural infiltration below BAS...  Ventilation must be recommended or installed.  SO DON'T AIR SEAL TO MUCH! © 2011 Steven Winter Associates, Inc. All rights reserved. © 2011 Steven Winter Associates, Inc. All rights reserved. Ventilation Requirements Ventilation systems for existing homes that are:

469

Multiple System Rate Process  

NLE Websites -- All DOE Office Websites (Extended Search)

DSW Multiple System Transmission Rate Process DSW Multiple System Transmission Rate Process Federal Register Notice Withdrawing Rate Proposal (PDF) Formal Process Extension Federal Register Notice (PDF) Customer Savings Under Various MSTR (XLS) Public Information Forum March 29, 2005 Customer Meeting Overview (Power Point) Customer Meeting Overview (PDF) Customer Meeting Transcript (PDF) Public Comment Forum April 6, 2005 Customer Meeting Transcript (PDF) Response Letter 5-17-05 (PDF) Customer Letters Tonopah ID-5/25/05 (PDF) APS-5/26/05 (PDF) SRP-5/27/05 (PDF) RSLynch-6/1/05 (PDF) KRSaline-6/1/05 (PDF) Formal Process Federal Register Notice (Word) Federal Register Notice (PDF) Brochure (Word) Appendices to Brochure: A B C D E1 E2 F1 F2 GH Public Information Forum July 14, 2004 Customer Meeting Overview (Power Point)

470

Ductless Hydronic Distribution Systems  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

8, 2011 8, 2011 Ductless Hydronic Distribution Systems Welcome to the Webinar! We will start at 1:00 PM Eastern Time Be sure that you are also dialed into the telephone conference call: Dial-in number: 800-779-8694; Pass code: 2506667 Download the presentation at: www.buildingamerica.gov/meetings.html Building Technologies Program eere.energy.gov * Reduce energy use in new and existing residential buildings * Promote building science and systems engineering / integration approach * "Do no harm": Ensure safety, health and durability are maintained or improved * Accelerate adoption of high performance technologies www.buildingamerica.gov Introduction to Building America Building Technologies Program eere.energy.gov Building America Industry Consortia

471

BNL | Atmospheric Systems Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Atmospheric System Research is a DOE observation-based research program Atmospheric System Research is a DOE observation-based research program created to advance process-level understanding of the key interactions among aerosols, clouds, precipitation, radiation, dynamics, and thermodynamics, with the ultimate goal of reducing the uncertainty in global and regional climate simulations and projections. General areas of research at BNL under this program include studies of aerosol and cloud lifecycles, and cloud-aerosol-precipitation interactions. Contact Robert McGraw, 631.344.3086 aerosols Aerosol Life Cycle The strategic focus of the Aerosol Life Cycle research is observation-based process science-examining the properties and evolution of atmospheric aerosols. Observations come from both long-term studies conducted by the

472

Stereoscopic optical viewing system  

DOE Patents (OSTI)

An improved optical system which provides the operator with a stereoscopic viewing field and depth of vision, particularly suitable for use in various machines such as electron or laser beam welding and drilling machines. The system features two separate but independently controlled optical viewing assemblies from the eyepiece to a spot directly above the working surface. Each optical assembly comprises a combination of eye pieces, turning prisms, telephoto lenses for providing magnification, achromatic imaging relay lenses and final stage pentagonal turning prisms. Adjustment for variations in distance from the turning prisms to the workpiece, necessitated by varying part sizes and configurations and by the operator's visual accuity, is provided separately for each optical assembly by means of separate manual controls at the operator console or within easy reach of the operator.

Tallman, C.S.

1986-05-02T23:59:59.000Z

473

Quartz resonator processing system  

DOE Patents (OSTI)

Disclosed is a single chamber ultra-high vacuum processing system for the oduction of hermetically sealed quartz resonators wherein electrode metallization and sealing are carried out along with cleaning and bake-out without any air exposure between the processing steps. The system includes a common vacuum chamber in which is located a rotatable wheel-like member which is adapted to move a plurality of individual component sets of a flat pack resonator unit past discretely located processing stations in said chamber whereupon electrode deposition takes place followed by the placement of ceramic covers over a frame containing a resonator element and then to a sealing stage where a pair of hydraulic rams including heating elements effect a metallized bonding of the covers to the frame.

Peters, Roswell D. M. (Rustburg, VA)

1983-01-01T23:59:59.000Z

474

Power line detection system  

DOE Patents (OSTI)

A short-range, radio frequency (RF) transmitting-receiving system that provides both visual and audio warnings to the pilot of a helicopter or light aircraft of an up-coming power transmission line complex. Small, milliwatt-level narrowband transmitters, powered by the transmission line itself, are installed on top of selected transmission line support towers or within existing warning balls, and provide a continuous RF signal to approaching aircraft. The on-board receiver can be either a separate unit or a portion of the existing avionics, and can also share an existing antenna with another airborne system. Upon receipt of a warning signal, the receiver will trigger a visual and an audio alarm to alert the pilot to the potential power line hazard. 4 figs.

Latorre, V.R.; Watwood, D.B.

1994-09-27T23:59:59.000Z

475

Wind energy conversion system  

DOE Patents (OSTI)

The wind energy conversion system includes a wind machine having a propeller connected to a generator of electric power, the propeller rotating the generator in response to force of an incident wind. The generator converts the power of the wind to electric power for use by an electric load. Circuitry for varying the duty factor of the generator output power is connected between the generator and the load to thereby alter a loading of the generator and the propeller by the electric load. Wind speed is sensed electro-optically to provide data of wind speed upwind of the propeller, to thereby permit tip speed ratio circuitry to operate the power control circuitry and thereby optimize the tip speed ratio by varying the loading of the propeller. Accordingly, the efficiency of the wind energy conversion system is maximized.

Longrigg, Paul (Golden, CO)

1987-01-01T23:59:59.000Z

476

Pressure suppression system  

DOE Patents (OSTI)

A pressure suppression system includes a containment vessel surrounding a reactor pressure vessel and defining a drywell therein containing a non-condensable gas. An enclosed wetwell pool is disposed inside the containment vessel, and an enclosed gravity driven cooling system (GDCS) pool is disposed above the wetwell pool in the containment vessel. The GDCS pool includes a plenum for receiving through an inlet the non-condensable gas carried with steam from the drywell following a loss-of-coolant accident (LOCA). A condenser is disposed in the GDCS plenum for condensing the steam channeled therein and to trap the non-condensable gas therein. A method of operation includes draining the GDCS pool following the LOCA and channeling steam released into the drywell following the LOCA into the GDCS plenum for cooling along with the non-condensable gas carried therewith for trapping the gas therein.

Gluntz, Douglas M. (San Jose, CA)

1994-01-01T23:59:59.000Z

477

Pressure suppression containment system  

DOE Patents (OSTI)

A pressure suppression containment system includes a containment vessel surrounding a reactor pressure vessel and defining a drywell therein containing a non-condensable gas. An enclosed wetwell pool is disposed inside the containment vessel, and a gravity driven cooling system (GDCS) pool is disposed above the wetwell pool in the containment vessel. The wetwell pool includes a plenum for receiving the non-condensable gas carried with steam from the drywell following a loss-of coolant-accident (LOCA). The wetwell plenum is vented to a plenum above the GDCS pool following the LOCA for suppressing pressure rise within the containment vessel. A method of operation includes channeling steam released into the drywell following the LOCA into the wetwell pool for cooling along with the non-condensable gas carried therewith. The GDCS pool is then drained by gravity, and the wetwell plenum is vented into the GDCS plenum for channeling the non-condensable gas thereto.

Gluntz, Douglas M. (San Jose, CA); Townsend, Harold E. (San Jose, CA)

1994-03-15T23:59:59.000Z

478

Pressure suppression containment system  

DOE Patents (OSTI)

A pressure suppression containment system includes a containment vessel surrounding a reactor pressure vessel and defining a drywell therein containing a non-condensable gas. An enclosed wetwell pool is disposed inside the containment vessel, and a gravity driven cooling system (GDCS) pool is disposed above the wetwell pool in the containment vessel. The wetwell pool includes a plenum for receiving the non-condensable gas carried with steam from the drywell following a loss-of-coolant-accident (LOCA). The wetwell plenum is vented to a plenum above the GDCS pool following the LOCA for suppressing pressure rise within the containment vessel. A method of operation includes channeling steam released into the drywell following the LOCA into the wetwell pool for cooling along with the non-condensable gas carried therewith. The GDCS pool is then drained by gravity, and the wetwell plenum is vented into the GDCS plenum for channeling the non-condensable gas thereto. 6 figures.

Gluntz, D.M.; Townsend, H.E.

1994-03-15T23:59:59.000Z

479

GENERAL ELECTRIC POWER SYSTEMS  

E-Print Network (OSTI)

Since last years GTC Conference, a considerable number of significant events have occurred in the gasification technology marketplace. New IGCC projects have come on stream with commercial operation, other new IGCC projects have been announced and started in development, environmental issues have gained emphasis, and energy prices, notably natural gas, have escalated dramatically. Directionally, all of these events appear to have created a more favorable atmosphere for IGCC projects. Related to an ongoing IGCC project currently in development, a joint analysis has been performed by Global Energy, General Electric Power Systems, and Praxair to evaluate technical and economic elements for the performance of BGL Gasification Technology based on solid hydrocarbon fuel feed to an IGCC for power generation. Results of the analysis provide a picture of the relative economics in todays environment for electrical power generation by conventional natural gas fired combined cycle power systems compared to using BGL Gasification Technology in an IGCC configuration. 2

Igcc Power Generation; Richard A. Olliver; John M. Wainwright; Raymond F. Drnevich Abstract

2000-01-01T23:59:59.000Z

480

Power line detection system  

DOE Patents (OSTI)

A short-range, radio frequency (RF) transmitting-receiving system that provides both visual and audio warnings to the pilot of a helicopter or light aircraft of an up-coming power transmission line complex. Small, milliwatt-level narrowband transmitters, powered by the transmission line itself, are installed on top of selected transmission line support towers or within existing warning balls, and provide a continuous RF signal to approaching aircraft. The on-board receiver can be either a separate unit or a portion of the existing avionics, and can also share an existing antenna with another airborne system. Upon receipt of a warning signal, the receiver will trigger a visual and an audio alarm to alert the pilot to the potential power line hazard.

Latorre, Victor R. (Tracy, CA); Watwood, Donald B. (Tracy, CA)

1994-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "ized system distri" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Electric turbocompound control system  

DOE Patents (OSTI)

Turbocompound systems can be used to affect engine operation using the energy in exhaust gas that is driving the available turbocharger. A first electrical device acts as a generator in response to turbocharger rotation. A second electrical device acts as a motor to put mechanical power into the engine, typically at the crankshaft. Apparatus, systems, steps, and methods are described to control the generator and motor operations to control the amount of power being recovered. This can control engine operation closer to desirable parameters for given engine-related operating conditions compared to actual. The electrical devices can also operate in "reverse," going between motor and generator functions. This permits the electrical device associated with the crankshaft to drive the electrical device associated with the turbocharger as a motor, overcoming deficient engine operating conditions such as associated with turbocharger lag.

Algrain, Marcelo C. (Dunlap, IL)

2007-02-13T23:59:59.000Z

482

Neural daylight control system  

E-Print Network (OSTI)

The paper describes the design, the implementation of a neural controller used in an automatic daylight control system. The automatic lighting control system (ALCS) attempt to maintain constant the illuminance at the desired level on working plane even if the daylight contribution is variable. Therefore, the daylight will represent the perturbation signal for the ALCS. The mathematical model of process is unknown. The applied structure of control need the inverse model of process. For this purpose it was used other artificial neural network (ANN) which identify the inverse model of process in an on-line manner. In fact, this ANN identify the inverse model of process + the perturbation signal. In this way the learning signal for neural controller has a better accuracy for the present application.

Grif, Horatiu Stefan

2010-01-01T23:59:59.000Z

483

Downhole Data Transmission System  

DOE Patents (OSTI)

A system for transmitting data through a string of down-hole components. In accordance with one aspect, the system includes a plurality of downhole components, such as sections of pipe in a drill string. Each downhole component includes a pin end and a box end, with the pin end of one downhole component being adapted to be connected to the box end of another. Each pin end includes external threads and an internal pin face distal to the external threads. Each box end includes an internal shoulder face with internal threads distal to the internal shoulder face. The internal pin face and the internal shoulder face are aligned with and proximate each other when the pin end of the one component is threaded into a box end of the other component.

Hall, David R. (Provo, UT); Hall, Jr., H. Tracy (Provo, UT); Pixton, David (Lehi, UT); Dahlgren, Scott (Provo, UT); Fox, Joe (Spanish Fork, UT)

2004-04-06T23:59:59.000Z

484

Downhole Data Transmission System  

DOE Patents (OSTI)

A system for transmitting data through a string of downhole components. In one aspect, the system includes first and second magnetically conductive, electrically insulating elements at both ends of the component. Each element includes a first U-shaped trough with a bottom, first and second sides and an opening between the two sides. Electrically conducting coils are located in each trough. An electrical conductor connects the coils in each component. In operation, a varying current applied to a first coil in one component generates a varying magnetic field in the first magnetically conductive, electrically insulating element, which varying magnetic field is conducted to and thereby produces a varying magnetic field in the second magnetically conductive, electrically insulating element of a connected component, which magnetic field thereby generates a varying electrical current in the second coil in the connected component.

Hall, David R. (Provo, UT); Hall, Jr., H. Tracy (Provo, UT); Pixton, David (Lehi, UT); Dahlgren, Scott (Provo, UT); Fox, Joe (Spanish Fork, UT)

2003-12-30T23:59:59.000Z

485

Photovoltaic module mounting system  

SciTech Connect

A solar array mounting system having unique installation, load distribution, and grounding features, and which is adaptable for mounting solar panels having no external frame. The solar array mounting system includes flexible, pedestal-style feet and structural links connected in a grid formation on the mounting surface. The photovoltaic modules are secured in place via the use of attachment clamps that grip the edge of the typically glass substrate. The panel mounting clamps are then held in place by tilt brackets and/or mid-link brackets that provide fixation for the clamps and align the solar panels at a tilt to the horizontal mounting surface. The tilt brackets are held in place atop the flexible feet and connected link members thus creating a complete mounting structure.

Miros, Robert H. J. (Fairfax, CA); Mittan, Margaret Birmingham (Oakland, CA); Seery, Martin N. (San Rafael, CA); Holland, Rodney H. (Novato, CA)

2012-04-17T23:59:59.000Z

486

Photovoltaic module mounting system  

SciTech Connect

A solar array mounting system having unique installation, load distribution, and grounding features, and which is adaptable for mounting solar panels having no external frame. The solar array mounting system includes flexible, pedestal-style feet and structural links connected in a grid formation on the mounting surface. The photovoltaic modules are secured in place via the use of attachment clamps that grip the edge of the typically glass substrate. The panel mounting clamps are then held in place by tilt brackets and/or mid-link brackets that provide fixation for the clamps and align the solar panels at a tilt to the horizontal mounting surface. The tilt brackets are held in place atop the flexible feet and connected link members thus creating a complete mounting structure.

Miros, Robert H. J.; Mittan, Margaret Birmingham; Seery, Martin N; Holland, Rodney H

2012-09-18T23:59:59.000Z

487

Mobile Biomass Pelletizing System  

DOE Green Energy (OSTI)

This grant project examines multiple aspects of the pelletizing process to determine the feasibility of pelletizing biomass using a mobile form factor system. These aspects are: the automatic adjustment of the die height in a rotary-style pellet mill, the construction of the die head to allow the use of ceramic materials for extreme wear, integrating a heat exchanger network into the entire process from drying to cooling, the use of superheated steam for adjusting the moisture content to optimum, the economics of using diesel power to operate the system; a break-even analysis of estimated fixed operating costs vs. tons per hour capacity. Initial development work has created a viable mechanical model. The overall analysis of this model suggests that pelletizing can be economically done using a mobile platform.

Thomas Mason

2009-04-16T23:59:59.000Z

488

Passive containment cooling system  

DOE Patents (OSTI)

A passive containment cooling system includes a containment vessel surrounding a reactor pressure vessel and defining a drywell therein containing a non-condensable gas. An enclosed wetwell pool is disposed inside the containment vessel, and a gravity driven cooling system (GDCS) pool is disposed above the wetwell pool in the containment vessel and is vented to the drywell. An isolation pool is disposed above the GDCS pool and includes an isolation condenser therein. The condenser has an inlet line disposed in flow communication with the drywell for receiving the non-condensable gas along with any steam released therein following a loss-of-coolant accident (LOCA). The condenser also has an outlet line disposed in flow communication with the drywell for returning to the drywell both liquid condensate produced upon cooling of the steam and the non-condensable gas for reducing pressure within the containment vessel following the LOCA.

Billig, Paul F. (San Jose, CA); Cooke, Franklin E. (San Jose, CA); Fitch, James R. (San Jose, CA)

1994-01-01T23:59:59.000Z

489

Passive containment cooling system  

DOE Patents (OSTI)

A passive containment cooling system includes a containment vessel surrounding a reactor pressure vessel and defining a drywell therein containing a non-condensable gas. An enclosed wetwell pool is disposed inside the containment vessel, and a gravity driven cooling system (GDCS) pool is disposed above the wetwell pool in the containment vessel and is vented to the drywell. An isolation pool is disposed above the GDCS pool and includes an isolation condenser therein. The condenser has an inlet line disposed in flow communication with the drywell for receiving the non-condensable gas along with any steam released therein following a loss-of-coolant accident (LOCA). The condenser also has an outlet line disposed in flow communication with the drywell for returning to the drywell both liquid condensate produced upon cooling of the steam and the non-condensable gas for reducing pressure within the containment vessel following the LOCA. 1 figure.

Billig, P.F.; Cooke, F.E.; Fitch, J.R.

1994-01-25T23:59:59.000Z

490

Cryogenic support system  

DOE Patents (OSTI)

A support system is disclosed for restraining large masses at very low or cryogenic temperatures. The support system employs a tie bar that is pivotally connected at opposite ends to an anchoring support member and a sliding support member. The tie bar extends substantially parallel to the longitudinal axis of the cold mass assembly, and comprises a rod that lengthens when cooled and a pair of end attachments that contract when cooled. The rod and end attachments are sized so that when the tie bar is cooled to cryogenic temperature, the net change in tie bar length is approximately zero. Longitudinal force directed against the cold mass assembly is distributed by the tie bar between the anchoring support member and the sliding support member. 7 figs.

Nicol, T.H.; Niemann, R.C.; Gonczy, J.D.

1988-11-01T23:59:59.000Z

491

ADVANCED WORKER PROTECTION SYSTEM  

Science Conference Proceedings (OSTI)

From 1993 to 2000, OSS worked under a cost share contract from the Department of Energy (DOE) to develop an Advanced Worker Protection System (AWPS). The AWPS is a protective ensemble that provides the user with both breathing air and cooling for a NIOSH-rated duration of two hours. The ensemble consists of a liquid air based backpack, a Liquid Cooling Garment (LCG), and an outer protective garment. The AWPS project was divided into two phases. During Phase 1, OSS developed and tested a full-scale prototype AWPS. The testing showed that workers using the AWPS could work twice as long as workers using a standard SCBA. The testing also provided performance data on the AWPS in different environments that was used during Phase 2 to optimize the design. During Phase 1, OSS also performed a life-cycle cost analysis on a representative clean up effort. The analysis indicated that the AWPS could save the DOE millions of dollars on D and D activities and improve the health and safety of their workers. During Phase 2, OSS worked to optimize the AWPS design to increase system reliability, to improve system performance and comfort, and to reduce the backpack weight and manufacturing costs. To support this design effort, OSS developed and tested several different generations of prototype units. Two separate successful evaluations of the ensemble were performed by the International Union of Operation Engineers (IUOE). The results of these evaluations were used to drive the design. During Phase 2, OSS also pursued certifying the AWPS with the applicable government agencies. The initial intent during Phase 2 was to finalize the design and then to certify the system. OSS and Scott Health and Safety Products teamed to optimize the AWPS design and then certify the system with the National Institute of Occupational Health and Safety (NIOSH). Unfortunately, technical and programmatic difficulties prevented us from obtaining NIOSH certification. Despite the inability of NIOSH to certify the design, OSS was able to develop and successfully test, in both the lab and in the field, a prototype AWPS. They clearly demonstrated that a system which provides cooling can significantly increase worker productivity by extending the time they can function in a protective garment. They were also able to develop mature outer garment and LCG designs that provide considerable benefits over current protective equipment, such as self donning and doffing, better visibility, and machine washable. A thorough discussion of the activities performed during Phase 1 and Phase 2 is presented in the AWPS Final Report. The report also describes the current system design, outlines the steps needed to certify the AWPS, discusses the technical and programmatic issues that prevented the system from being certified, and presents conclusions and recommendations based upon the seven year effort.

Judson Hedgehock

2001-03-16T23:59:59.000Z

492

ELECTROSTATIC MEMORY SYSTEM  

DOE Patents (OSTI)

An improved electrostatic memory system is de scribed fer a digital computer wherein a plarality of storage tubes are adapted to operate in either of two possible modes. According to the present irvention, duplicate storage tubes are provided fur each denominational order of the several binary digits. A single discriminator system is provided between corresponding duplicate tubes to determine the character of the infurmation stored in each. If either tube produces the selected type signal, corresponding to binazy "1" in the preferred embodiment, a "1" is regenerated in both tubes. In one mode of operation each bit of information is stored in two corresponding tubes, while in the other mode of operation each bit is stored in only one tube in the conventional manner.

Chu, J.C.

1958-09-23T23:59:59.000Z

493

Advanced Integrated Traction System  

DOE Green Energy (OSTI)

Besides the development of a high temperature ETS the development of industrial suppliers took place because of this project. Suppliers of industrial power electronic components are numerous, but there are few that have traction drive knowledge. This makes it difficult to achieve component reliability, durability, and cost requirements necessary of high volume automotive production. The commercialization of electric traction systems for automotive industry requires a strong diverse supplier base. Developing this supplier base is dependent on a close working relationship between the OEM and supplier so that appropriate component requirements can be developed. GM has worked closely with suppliers to develop components for electric traction systems. Components that have been the focus of this project are power modules, capacitors, heavy copper boards, current sensors, and gate drive and controller chip sets. Working with suppliers, detailed component specifications have been developed. Current, voltage, and operation environment during the vehicle drive cycle were evaluated to develop higher resolution/accurate component specifications.

Greg Smith; Charles Gough

2011-08-31T23:59:59.000Z

494

Hamiltonian systems and symplectic integrators  

Science Conference Proceedings (OSTI)

Keywords: Hamiltonian systems, Runge-Kutta type methods, conservation of energy, symplectic integrators, symplectic stability

Peter Grtz; Rudolf Scherer

1997-12-01T23:59:59.000Z

495

CMS System Security Plan Template  

Science Conference Proceedings (OSTI)

System Security Plan (SSP) Template Instructions. This template contains boiler plate language. Each template must be ...

2009-06-30T23:59:59.000Z

496

Adaptive protection algorithm and system  

Science Conference Proceedings (OSTI)

An adaptive protection algorithm and system for protecting electrical distribution systems traces the flow of power through a distribution system, assigns a value (or rank) to each circuit breaker in the system and then determines the appropriate trip set points based on the assigned rank.

Hedrick, Paul (Pittsburgh, PA); Toms, Helen L. (Irwin, PA); Miller, Roger M. (Mars, PA)

2009-04-28T23:59:59.000Z

497

Compressed Air System Maintenance Guide  

Science Conference Proceedings (OSTI)

The "Compressed Air System Maintenance Guide" provides fossil plant personnel with information on the operation and maintenance of the compressed air system. The contents of this guide will assist personnel in improving performance of the compressed air system, reducing maintenance costs, and increasing air system reliability.

2002-11-27T23:59:59.000Z

498

Optimal Control of Distillation Systems  

E-Print Network (OSTI)

The optimum performance of a distillation system can be evaluated by examining the product purities, the product recoveries, and the system's capability to respond to small or large, expected or unexpected, plant disturbances. An optimal control system should include accurate instrumentation, closed loop purity control, and a computer system to execute direct digital control with appropriate feed-forward algorithms.

Chatterjee, N.; Suchdeo, S. R.

1984-01-01T23:59:59.000Z

499

Open Energy Information Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

OpenEIS (energy information OpenEIS (energy information systems) Jessica Granderson Lawrence Berkeley National Laboratory JGranderson@lbl.gov, 510.486.6792 April 3, 2013 2 | Building Technologies Office eere.energy.gov Purpose & Objectives Problem Statement: Advanced algorithms and analyses can enable 5-40% savings, yet are rarely adopted; 3 relevant barriers include: 1. Lack of awareness that simple analytics can be used to generate valuable insights and actionable information, without further training

500

Open Energy Information Systems  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

OpenEIS (energy information OpenEIS (energy information systems) Jessica Granderson Lawrence Berkeley National Laboratory JGranderson@lbl.gov, 510.486.6792 April 3, 2013 2 | Building Technologies Office eere.energy.gov Purpose & Objectives Problem Statement: Advanced algorithms and analyses can enable 5-40% savings, yet are rarely adopted; 3 relevant barriers include: 1. Lack of awareness that simple analytics can be used to generate valuable insights and actionable information, without further training