National Library of Energy BETA

Sample records for iv es ap

  1. MA AP MA MA MA AP AP MA MA MA AP AP

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AP MA MA MA AP AP MA MA MA AP AP low low low AP MA Run PAMM AP Low alpha University Holidays APPAMM Spear Down Hrs S 30 31 S 30 5260 832 6092 2013 2014 Scheduled Hours Users...

  2. MA AP MA MA MA AP AP MA MA MA AP AP

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AP MA MA MA AP AP MA MA MA AP AP low low low AP MA Run PAMM / AP Low alpha University Holidays AP/PAMM Spear Down Hrs S 30 31 S 30 5260 832 6092 2013 2014 Scheduled Hours Users Total 29 31 30 29 31 30 F 31 28 29 30 T 31 28 27 29 28 30 30 27 29 W 30 29 26 29 27 31 28 AP T 29 26 29 27 AP PAMM 30 28 25 31 28 26 30 27 30 28 26 M 28 25 29 27 24 30 27 25 29 26 S 27 24 28 26 23 27 29 26 24 28 25 S 26 23 28 26 24 23 27 25 28 28 25 25 22 27 24 25 23 F 25 26 24 21 27 24 22 26 23 22 27 T 24 21 20 24 22 21

  3. AP R

    Office of Legacy Management (LM)

    . aw wL2--\ AP R 2 2 i386 NE-23 Elimination of the Chupadera Mesa and Los Alamos County Industrial Waste Line Sites from Further Consideration for FUSRAP Inclusion Carlos E. Garcia, Director Environmental Safety and Health Division Albuquerque Operations Office The enclosed material is being provided to you to document the final actiors taken under the Department's Formerly Utilized Sites Remedial Action Program (FUSRAP) for the Chupadera Kesa area and the Los Alamos County Industrial Waste

  4. APS and Frontiers

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the annual publication of Argonne research highlights. This page contains Frontiers articles focusing on APS-related research. APS Articles in Frontiers 2004 Cover of Frontiers...

  5. APS User Operations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Schedules APS Schedule Useful Links Beamline Design Library (former Design Exchange) Machine Status Link Bunch Clock Information APS Systems Status Storage Ring Operating Status...

  6. Tank 241-AP-107, grab samples, 7AP-99-1, 7AP-99-3 and 7AP-99-4 analytical results for the final report

    SciTech Connect (OSTI)

    BELL, K.E.

    1999-08-12

    This document is the format IV, final report for the tank 241-AP-107 (AP-107) grab samples taken in May 1999 to address waste compatibility concerns. Chemical, radiochemical, and physical analyses on the tank AP-107 samples were performed as directed in Compatibility Grab Sampling and Analysis Plan for Fiscal year 1999. Any deviations from the instructions provided in the tank sampling and analysis plan (TSAP) were discussed in this narrative. Interim data were provided earlier to River Protection Project (RPP) personnel, however, the data presented here represent the official results. No notification limits were exceeded.

  7. APS and Logos

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Logos A quarterly magazine about Argonne research. The Argonne Logos articles in this section focus on APS-related research. APS Articles in Logos 2003 Cover of Logos Summer 2003...

  8. Approved Program Proposals (AP)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Approved Program Proposals (AP) Print An Approved Program (AP) enables an investigator, or a group of investigators, to receive a set percentage of beam time to partner with ALS staff both to carry out an extended research program and to develop new tools and/or new research protocols that will be made available to the general user population. APs are arranged for a period of up to three years. AP Proposal Submission Deadlines January 15 July 15 AP Proposal Submission Guidelines Step 1: Contact

  9. Approved Program Proposals (AP)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Approved Program Proposals (AP) Approved Program Proposals (AP) Print Thursday, 13 May 2010 11:53 An Approved Program (AP) enables an investigator, or a group of investigators, to receive a set percentage of beam time to partner with ALS staff both to carry out an extended research program and to develop new tools and/or new research protocols that will be made available to the general user population. APs are arranged for a period of up to three years. AP Proposal Submission Deadlines January

  10. Approved Program Proposals (AP)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Approved Program Proposals (AP) Print An Approved Program (AP) enables an investigator, or a group of investigators, to receive a set percentage of beam time to partner with ALS staff both to carry out an extended research program and to develop new tools and/or new research protocols that will be made available to the general user population. APs are arranged for a period of up to three years. AP Proposal Submission Deadlines January 15 July 15 AP Proposal Submission Guidelines Step 1: Contact

  11. Approved Program Proposals (AP)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Approved Program Proposals (AP) Print An Approved Program (AP) enables an investigator, or a group of investigators, to receive a set percentage of beam time to partner with ALS staff both to carry out an extended research program and to develop new tools and/or new research protocols that will be made available to the general user population. APs are arranged for a period of up to three years. AP Proposal Submission Deadlines January 15 July 15 AP Proposal Submission Guidelines Step 1: Contact

  12. Approved Program Proposals (AP)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Approved Program Proposals (AP) Print An Approved Program (AP) enables an investigator, or a group of investigators, to receive a set percentage of beam time to partner with ALS staff both to carry out an extended research program and to develop new tools and/or new research protocols that will be made available to the general user population. APs are arranged for a period of up to three years. AP Proposal Submission Deadlines January 15 July 15 AP Proposal Submission Guidelines Step 1: Contact

  13. Approved Program Proposals (AP)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Approved Program Proposals (AP) Print An Approved Program (AP) enables an investigator, or a group of investigators, to receive a set percentage of beam time to partner with ALS staff both to carry out an extended research program and to develop new tools and/or new research protocols that will be made available to the general user population. APs are arranged for a period of up to three years. AP Proposal Submission Deadlines January 15 July 15 AP Proposal Submission Guidelines Step 1: Contact

  14. Global Green Energy ApS | Open Energy Information

    Open Energy Info (EERE)

    ApS Jump to: navigation, search Name: Global Green Energy ApS Place: Aarhus C, Denmark Zip: DK- 8000 Sector: Wind energy Product: Wind farm project developer. References: Global...

  15. APS 1999 Conferences

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of interest to the APS researcher community. Workshop on Scientific Applications of the LCLS. (Jan. 12-14) Stanford Synchrotron Radiation Laboratory (SSLC) Stanford, CA Workshop on...

  16. APS 2007 Conferences

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Accelerator Conference (APAC 2007) (Jan. 29-Feb. 2) Indore, India APS Upgrade ERL Optics Workshop (April 23) Argonne National Laboratory, Argonne, IL Synchrotron Radiation...

  17. APS 1995 Conferences

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Conferences & Workshops This section tracks conferences and workshops of interest to the APS researcher community. Synchrotron Radiation Instrumentation '95 (Oct. 17-20) A...

  18. MA MA AP

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    MA AP low low low MA Run PAMM / AP Low alpha University Holidays AP/PAMM Spear Down Oct Nov S Apr May Jun Jul Aug Sep 7/17/2015 SPEAR OPERATING SCHEDULE 2015-2016 2015 2016 Oct Nov Dec Jan Feb Mar S 1 1 2 1 4 1 M 2 1 2 1 T 3 1 3 PAMM 1 2 2 3 6 3 W 4 2 3 AP AP 5 2 1 3 2 4 F 2 6 4 1 5 2 4 3 T 1 5 3 5 2 7 4 3 1 5 4 1 6 4 1 5 8 5 S 4 8 2 6 3 2 7 4 2 6 5 S 3 7 6 5 3 7 6 3 8 6 3 7 4 8 7 M 5 9 7 4 9 10 7 AP PAMM PAMM PAMM PAMM 4 8 5 4 9 6 8 AP 5 9 6 5 AP 10 7 5 9 AP 8 6 10 9 13 W 7 11 9 11 T 6 10 8 12

  19. APS Science 2006.

    SciTech Connect (OSTI)

    Gibson, J. M.; Fenner, R. B.; Long, G.; Borland, M.; Decker, G.

    2007-05-24

    In my five years as the Director of the Advanced Photon Source (APS), I have been fortunate to see major growth in the scientific impact from the APS. This year I am particularly enthusiastic about prospects for our longer-term future. Every scientific instrument must remain at the cutting edge to flourish. Our plans for the next generation of APS--an APS upgrade--got seriously in gear this year with strong encouragement from our users and sponsors. The most promising avenue that has emerged is the energy-recovery linac (ERL) (see article on page xx), for which we are beginning serious R&D. The ERL{at}APS would offer revolutionary performance, especially for x-ray imaging and ultrafast science, while not seriously disrupting the existing user base. I am very proud of our accelerator physics and engineering staff, who not only keep the current APS at the forefront, but were able to greatly impress our international Machine Advisory Committee with the quality of their work on the possible upgrade option (see page xx). As we prepare for long-term major upgrades, our plans to develop and optimize all the sectors at APS in the near future are advancing. Several new beamlines saw first light this year, including a dedicated powder diffraction beamline (11-BM), two instruments for inelastic x-ray scattering at sector 30, and the Center for Nanoscale Materials (CNM) Nanoprobe beamline at sector 26. Our partnership in the first x-ray free-electron laser (LCLS) to be built at Stanford contributes to revolutionary growth in ultrafast science (see page xx), and we are developing a pulse chirping scheme to get ps pulses at sector 7 of the APS within a year or so. In this report, you will find selected highlights of scientific research at the APS from calendar year 2006. The highlighted work covers diverse disciplines, from fundamental to applied science. In the article on page xx you can see the direct impact of APS research on technology. Several new products have emerged from

  20. AP Declaration Helper : Home

    National Nuclear Security Administration (NNSA)

    Announcements: Get Help with the IAEA Additional Protocol Because you are reading this web page, there is a good chance that you already know about the Additional Protocol (AP)...

  1. Approved Program Proposals (AP)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    its recommendations to the ALS Division Director. A letter will be sent to the PIs of successful proposals specifying the percentage of beam time and the period of the AP. The...

  2. APS Storage Ring Parameters

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    next up previous Next: Main Parameters APS Storage Ring Parameters M. Borland, G. Decker, L. Emery, W. Guo, K. Harkay, V. Sajaev, C.-Y. Yao Advanced Photon Source September 8, 2010...

  3. Mission | APS Engineering Support Division

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    mission, the APS Engineering Support Division provides: Highly reliable, state-of-the-art computer infrastructure to meet the needs of the APS. Leading-edge information...

  4. APS Science 2009.

    SciTech Connect (OSTI)

    Gibson, J. M; Mills, D. M.; Gerig, R.

    2010-05-01

    It is my pleasure to introduce the 2009 annual report of the Advanced Photon Source. This was a very good year for us. We operated with high reliability and availability, despite growing problems with obsolete systems, and our users produced a record output of publications. The number of user experiments increased by 14% from 2008 to more than 3600. We congratulate the recipients of the 2009 Nobel Prize in Chemistry-Venkatraman Ramakrishnan (Cambridge Institute for Medical Research), Thomas Steitz (Yale University), and Ada Yonath (Weizmann Institute) - who did a substantial amount of this work at APS beamlines. Thanks to the efforts of our users and staff, and the ongoing counsel of the APS Scientific Advisory Committee, we made major progress in advancing our planning for the upgrade of the APS (APS-U), producing a proposal that was positively reviewed. We hope to get formal approval in 2010 to begin the upgrade. With advocacy from our users and the support of our sponsor, the Office of Basic Energy Sciences in the Department of Energy (DOE) Office of Science, our operating budgets have grown to the level needed to more adequately staff our beamlines. We were also extremely fortunate to have received $7.9 M in American Recovery and Reinvestment Act ('stimulus') funding to acquire new detectors and improve several of our beamlines. The success of the new Linac Coherent Light Source at Stanford, the world's first x-ray free-electron laser, made us particularly proud since the undulators were designed and built by the APS. Among other highlights, we note that more than one-quarter of the 46 Energy Frontier Research Centers, funded competitively across the U.S. in 2009 by the DOE, included the Advanced Photon Source in their proposed work, which shows that synchrotron radiation, and the APS in particular, are central to energy research. While APS research covers everything from fundamental to applied science (reflected by the highlights in this report), the challenge

  5. ARM - Instrument - aps

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    govInstrumentsaps Documentation ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Instrument : Aerodynamic Particle Sizer (APS) Instrument Categories Aerosols

  6. APS Today: Calendar of Events

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    aps.anl.govNewsAPSToday Upcoming events at the Advanced Photon Source at Argonne National Laboratory. en-us Argonne National Laboratory http:www.aps.anl.govImages...

  7. APS Science 2007.

    SciTech Connect (OSTI)

    Not Available

    2008-05-30

    This report provides research highlights from the Advanced Photon Source (APS). Although these highlights represent less than 10% of the published work from the APS in 2007, they give a flavor of the diversity and impact of user research at the facility. In the strategic planning the aim is to foster the growth of existing user communities and foresee new areas of research. This coming year finds the APS engaged in putting together, along with the users, a blueprint for the next five years, and making the case for a set of prioritized investments in beamlines, the accelerator, and infrastructure, each of which will be transformational in terms of scientific impact. As this is written plans are being formulated for an important user workshop on October 20-21, 2008, to prioritize strategic plans. The fruit from past investments can be seen in this report. Examples include the creation of a dedicated beamline for x-ray photon correlation spectroscopy at Sector 8, the evolution of dedicated high-energy x-ray scattering beamlines at sectors 1 and 11, a dedicated imaging beamline at Sector 32, and new beamlines for inelastic scattering and powder diffraction. A single-pulse facility has been built in collaboration with Sector 14 (BioCARS) and Phil Anfinrud at the National Institutes of Health, which will offer exceptionally high flux for single-pulse diffraction. The nanoprobe at Sector 26, built and operated jointly by the Argonne Center for Nanoscale Materials and the X-ray Operations and Research (XOR) section of the APS X-ray Science Division, has come on line to define the state of the art in nanoscience.

  8. APS User News | Advanced Photon Source

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    News & Calendars Users Home APS User News User Announcements Proposal Deadlines and Related Meetings Conferences and Workshops APS Seminars and Meetings APS Committees and Reviews...

  9. Aps_notify Info Page

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Apsnotify -- APS Operations Event Notification List About Apsnotify English (USA) This list alerts subscribers to major events that may happen during operations at the Advanced...

  10. ap | National Nuclear Security Administration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ap | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency...

  11. APS- Renewable Energy Incentive Program

    Broader source: Energy.gov [DOE]

    Through the Renewable Incentive Program, Arizona Public Service (APS) offers customers who install solar water heating systems the opportunity to sell the renewable energy credits (RECs) associat...

  12. APS User News, Issue 88

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    -- John Rogers to be Keynote at Users Meeting -- 2015 APS Compton Award goes to Ice, Larson, and Sparks BRIEFLY NOTED -- Congratulations to Daniel Haskel, Winner of the 2015...

  13. APS Science | Advanced Photon Source

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Science APS Science features articles on Advanced Photon Source research and engineering highlights that are written for the interested public as well as the synchrotron x-ray,...

  14. NASA @ APS | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NASA @ APS NASA engineers developing rocket propulsion hardware 1 of 8 NASA engineers developing rocket propulsion hardware Patrick McManamen, a propulsion system engineer at NASA, ...

  15. Tank 241-AP-103 08/1999 Compatibility Grab Samples and Analytical Results for the Final Report

    SciTech Connect (OSTI)

    BELL, K.E.

    1999-12-09

    This document is the format IV, final report for the tank 241-AP-103 (AP-103) grab samples taken in August 1999 to address waste compatibility concerns. Chemical, radiochemical, and physical analyses on the tank AP-103 samples were performed as directed in ''Compatibility Grub Sampling and Analysis Plan for Fiscal Year 1999'' (Sasaki 1999a). Any deviations from the instructions provided in the tank sampling and analysis plan (TSAP) were discussed in this narrative. No notification limits were exceeded.

  16. Introduction to APS | Advanced Photon Source

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Introduction to APS What is the APS? What is the APS? The Advanced Photon Source is a synchrotron light source that produces high-energy, high-brightness x-ray beams. The source is...

  17. APS Publications | Advanced Photon Source

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the Sector(s)CAT(s) beamline(s) where the work was done, and whether or not GUP beam time was used, to apspubs@aps.anl.gov. Reminder for ANL employees: ANL employees are not...

  18. APS Organization Chart | Advanced Photon Source

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    APS Organization Chart The Advanced Photon Source (APS) organization comprises three divisions and one project office. Advanced Photon Source Organization Photon Sciences Overview...

  19. 1996ApJ...466..724G

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ApJ...466..724G 1996ApJ...466..724G 1996ApJ...466..724G 1996ApJ...466..724G 1996ApJ...466..724G 1996ApJ...466..724G 1996ApJ...466..724G 1996ApJ...466..724G

  20. ES H action plan

    SciTech Connect (OSTI)

    Not Available

    1991-01-01

    This document contains planned actions to correct the deficiencies identified in the Pre-Tiger Team Self-Assessment (PTTSA), January 1991, of Sandia National Laboratories (SNL -- Albuquerque, New Mexico; Tonopah, Nevada; and Kauai, Hawaii). The Self-Assessment was conducted by a Self-Assessment Working Group consisting of 19 department managers, with support from Environment, Safety, and Health (ES H) professionals, from October through December 1990. Findings from other past audits, dating back to 1985, were reviewed and compared with the PTTSA findings to determine if additional findings, key findings, or root causes were warranted. The resulting ES H Action Plan and individual planned actions were prepared by the ES H Action Plan Project Group with assistance from the Program owners/authors during February and March 1991. The plan was reviewed by SNL Management in April 1991. This document serves as a planning instrument for the Laboratories to aid in the scoping and sizing of activities related to ES H compliance for the coming five years. It will be modified as required to ensure a workload/funding balance and to address the findings resulting from the Tiger Team assessment at SNL, Albuquerque. The process of producing this document has served well to prepare SNL, Albuquerque, for the coming task of producing the required post-Tiger Team action plan document. 8 tabs.

  1. ES Alternatives | Open Energy Information

    Open Energy Info (EERE)

    ES Alternatives Jump to: navigation, search Name: ES Alternatives Place: Dallas, Texas Zip: 75201 Sector: Biomass Product: Landfill gas and biomass project developer. Coordinates:...

  2. 1994ApJ...431..604G

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4ApJ...431..604G 1994ApJ...431..604G 1994ApJ...431..604G 1994ApJ...431..604G 1994ApJ...431..604G 1994ApJ...431..604G 1994ApJ...431..604G 1994ApJ...431..604G 1994ApJ...431..604G 1994ApJ...431..604G 1994ApJ...431..604G 1994ApJ...431..604G 1994ApJ...431..604G

  3. AP-0001-001.PDF

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AP-PO-0001-001.doc. Building Security Date: 2000/05/12 1. Introduction: Building security is a top priority for all CAMD personnel. Theft and vandalism have negative impacts by virtue of the loss of research data as well as the monetary loss. 2. Purpose: The purpose of this policy is to insure the facility is secure when it is unoccupied. 3. Definitions: a. Secure means all building alarms are armed and the gate is locked. 4. Scope of Policy: There are three (3) buildings at the CAMD facility,

  4. 1992ApJ...399L..51G

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2ApJ...399L..51G 1992ApJ...399L..51G 1992ApJ...399L..51G 1992ApJ...399L..51G

  5. APS high heat load monochromator

    SciTech Connect (OSTI)

    Lee, W.K.; Mills, D.

    1993-02-01

    This document contains the design specifications of the APS high heat load (HHL) monochromator and associated accessories as of February 1993. It should be noted that work is continuing on many parts of the monochromator including the mechanical design, crystal cooling designs, etc. Where appropriate, we have tried to add supporting documentation, references to published papers, and calculations from which we based our decisions. The underlying philosophy behind performance specifications of this monochromator was to fabricate a device that would be useful to as many APS users as possible, that is, the design should be as generic as possible. In other words, we believe that this design will be capable of operating on both bending magnet and ID beamlines (with the appropriate changes to the cooling and crystals) with both flat and inclined crystal geometries and with a variety of coolants. It was strongly felt that this monochromator should have good energy scanning capabilities over the classical energy range of about 4 to 20 keywith Si (111) crystals. For this reason, a design incorporating one rotation stage to drive both the first and second crystals was considered most promising. Separate rotary stages for the first and second crystals can sometimes provide more flexibility in their capacities to carry heavy loads (for heavily cooled first crystals or sagittal benders of second crystals), but their tuning capabilities were considered inferior to the single axis approach.

  6. APS: Lighting up the future

    SciTech Connect (OSTI)

    Potent, V.J.

    1993-09-01

    Work on the Advanced Photon Source (APS) at Argonne National Laboratory (ANL) involves the construction and supporting research and development for a national user facility for synchrotron radiation research in the x-ray region. The facility, when operational in 1997, will provide super-intense x-ray beams for many areas of basic research and will serve the entire US x-ray research community of several thousand users. This paper describes the pertinent features of the design, construction and planned operation of the facility; and the impact quality has had in these areas. In addition, the introduction of several quality management techniques such as total quality management, reliability/availability planning, and user interface are discussed concerning their status and success.

  7. APS Map | Overview | Advanced Photon Source

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    technical facility: the linear accelerator, the booster synchrotron, the electron storage ring, insertion devices, and the experiment hall. APS systems map Next: Linear Accelerator...

  8. APS Seminars & Meetings | Advanced Photon Source

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Science Series A lunchtime gathering with presentations of the newest results from the experiment hall floor. Speakers are not announced in advance. Monthly APS Colloquium A...

  9. APS User Information | Advanced Photon Source

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    to APS, site access permission, user agreement, training, contactbio information your research: proposals, ESAFs, EEFs action items: things that need to be addressed before you...

  10. ELECTROCHEMICAL CORROSION TESTING OF TANKS 241-AN-102 & 241-AP-107 & 241-AP-108 IN SUPPORT OF ULTRASONIC TESTING

    SciTech Connect (OSTI)

    WYRWAS RB; DUNCAN JB

    2008-11-20

    This report presents the results of the corrosion rates that were measured using electrochemical methods for tanks 241-AN-102 (AN-102), 241-AP-107 (AP 107), and 241-AP-108 (AP-108) performed under test plant RPP-PLAN-38215. The steel used as materials of construction for AN and AP tank farms was A537 Class 1. Test coupons of A537 Class 1 carbon steel were used for corrosion testing in the AN-107, AP-107, and AP-108 tank waste. Supernate will be tested from AN-102, AP-107, and Ap-108. Saltcake testing was performed on AP-108 only.

  11. Microsoft PowerPoint - APS_07

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Barriers in Alcator C-Mod Catherine Fiore MIT Plasma Science and Fusion Center APS-DPP November 14, 2007 Orlando, Fl With Contributions from: W. L. Rowan , A. Dominguez, A. E....

  12. DNP 2015: APS Division of Nuclear Physics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New Mexico Annual Fall Meeting of the APS Division of Nuclear Physics October 28-31, 2015 Convention Center in downtown Santa Fe, NM Timetable for all workshops, regular and...

  13. APS- Residential Energy Efficiency Rebate Program

    Broader source: Energy.gov [DOE]

    APS customers may also sign up for a $99 home checkup (a $400 value) to have specially trained contractors identify energy savings upgrades.  Visit the program website for specific details and...

  14. refractory_retain_whyte_APS07.ppt

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 1 Plasma Science & Fusion Center, MIT, Cambridge USA 2 FOM-Rijnhuizen, Netherlands APS Division of Plasma Physics Meeting Mini-Conference: First Micron of the Wall November...

  15. AP-PO-0002-001.PDF

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AP-PO-0002-001.doc Experimental Hall Date: 20010109 Experimental Hall Policy: The following policies are to be followed for access to the Experimental Hall: 1. Smoking is not...

  16. APS Engineering Support Division (AES) | Advanced Photon Source

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    APS Engineering Support Division (AES) The APS Engineering Support Division provides reliable operations and technical support to the Advanced Photon Source user community. AES...

  17. Arizona Public Service Company APS | Open Energy Information

    Open Energy Info (EERE)

    Public Service Company APS Jump to: navigation, search Name: Arizona Public Service Company (APS) Place: Phoenix, Arizona Zip: 85004 Product: Generates, transmits and distributes...

  18. Six Berkeley Lab (Three ALS) Scientists Are 2012 APS Fellows

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Six Berkeley Lab (Three ALS) Scientists Are 2012 APS Fellows Print This year's American Physical Society (APS) Fellows include six scientists from Berkeley Lab, three of whom are...

  19. Proposed Rules IV. Conclusion

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    686 Federal Register / Vol. 81, No. 44 / Monday, March 7, 2016 / Proposed Rules IV. Conclusion For the reasons cited in this document, the NRC is denying PRM- 50-106. The NRC is denying this petition because the current regulations already address environmental qualification in both mild and design basis event conditions of electrical equipment located both inside and outside of the containment building that is important to safety, and the petitioners did not provide significant new or

  20. Tank 241-AP-107, grab samples 7AP-97-1, 7AP-97-2 and 7AP-97-3 analytical results for the final report

    SciTech Connect (OSTI)

    Steen, F.H.

    1997-12-22

    This document is the final report for tank 241-AP-107 grab samples. Three grab samples were collected from riser 1 on September 11, 1997. Analyses were performed on samples 7AP-97-1, 7AP-97-2 and 7AP-97-3 in accordance with the Compatibility Grab Sampling and Analysis Plan (TSAP) (Sasaki, 1997) and the Data Quality Objectives for Tank Farms Waste Compatibility Program (DQO) (Rev. 1: Fowler, 1995; Rev. 2: Mulkey and Nuier, 1997). The analytical results are presented in the data summary report (Table 1). A notification was made to East Tank Farms Operations concerning low hydroxide in the tank and a hydroxide (caustic) demand analysis was requested. The request for sample analysis (RSA) (Attachment 2) received for AP-107 indicated that the samples were polychlorinated biphenyl (PCB) suspects. Therefore, prior to performing the requested analyses, aliquots were made to perform PCB analysis in accordance with the 222-S Laboratory administrative procedure, LAP-101-100. The results of this analysis indicated that no PCBs were present at 50 ppm and analysis proceeded as non-PCB samples. The results and raw data for the PCB analysis will be included in a revision to this document. The sample breakdown diagrams (Attachment 1) are provided as a cross-reference for relating the tank farm customer identification numbers with the 222-S Laboratory sample numbers and the portion of sample analyzed.

  1. Talks on Fermilab experiments at the 1992 APS meetings

    SciTech Connect (OSTI)

    Pordes, S.

    1992-03-01

    This report contains short abstracts of paper on Fermilab experiments at the 1992 APS meetings. (LSP)

  2. Gamesa Energia ES | Open Energy Information

    Open Energy Info (EERE)

    Energia ES Jump to: navigation, search Name: Gamesa Energia ES Place: Vitoria, Spain Zip: 1013 Sector: Wind energy Product: Gamesa is one of the main wind turbine manufacturers...

  3. dBASE IV basics

    SciTech Connect (OSTI)

    O`Connor, P.

    1994-09-01

    This is a user`s manual for dBASE IV. dBASE IV is a popular software application that can be used on your personal computer to help organize and maintain your database files. It is actually a set of tools with which you can create, organize, select and manipulate data in a simple yet effective manner. dBASE IV offers three methods of working with the product: (1) control center: (2) command line; and (3) programming.

  4. Miravalles IV | Open Energy Information

    Open Energy Info (EERE)

    Information Name Miravalles IV Facility Geothermal Power Plant Sector Geothermal energy Location Information Coordinates 10.5251574, -85.254136 Loading map......

  5. Shiloh IV | Open Energy Information

    Open Energy Info (EERE)

    Shiloh IV Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service Owner EDF Renewable Energy Developer EDF Renewable Energy Energy Purchaser Pacific...

  6. Advanced Power Sources Ltd APS | Open Energy Information

    Open Energy Info (EERE)

    Sources Ltd APS Jump to: navigation, search Name: Advanced Power Sources Ltd (APS) Place: United Kingdom Product: UK R&D company based at Loughborough University focusing on fuel...

  7. Six Berkeley Lab (Three ALS) Scientists Are 2012 APS Fellows

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Six Berkeley Lab (Three ALS) Scientists Are 2012 APS Fellows Six Berkeley Lab (Three ALS) Scientists Are 2012 APS Fellows Print Friday, 07 December 2012 00:00 This year's American...

  8. Secretary Chu Statement on AP1000 Reactor Design Certification...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AP1000 Reactor Design Certification Secretary Chu Statement on AP1000 Reactor Design Certification December 22, 2011 - 3:25pm Addthis Washington, D.C. - U.S. Energy Secretary ...

  9. ARM - Campaign Instrument - ap-surf

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    govInstrumentsap-surf Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Campaign Instrument : Aerosol Profiler at Surface (AP-SURF) Instrument Categories Aerosols Campaigns Surface Observation in Support of in-situ Observations within the Arctic Boundary Layer [ Download Data ] North Slope Alaska, 2008.04.01 - 2008.05.31 Primary Measurements Taken The following measurements are those considered scientifically relevant. Refer to the datastream

  10. An Updated AP2 Beamline TURTLE Model

    SciTech Connect (OSTI)

    Gormley, M.; O'Day, S.

    1991-08-23

    This note describes a TURTLE model of the AP2 beamline. This model was created by D. Johnson and improved by J. Hangst. The authors of this note have made additional improvements which reflect recent element and magnet setting changes. The magnet characteristics measurements and survey data compiled to update the model will be presented. A printout of the actual TURTLE deck may be found in appendix A.

  11. AP600 containment purge radiological analysis

    SciTech Connect (OSTI)

    O`Connor, M.; Schulz, J.; Tan, C.

    1995-02-01

    The AP600 Project is a passive pressurized water reactor power plant which is part of the Design Certification and First-of-a-Kind Engineering effort under the Advanced Light Water Reactor program. Included in this process is the design of the containment air filtration system which will be the subject of this paper. We will compare the practice used by previous plants with the AP600 approach to meet the goals of industry standards in sizing the containment air filtration system. The radiological aspects of design are of primary significance and will be the focus of this paper. The AP600 Project optimized the design to combine the functions of the high volumetric flow rate, low volumetric flow rate, and containment cleanup and other filtration systems into one multi-functional system. This achieves a more simplified, standardized, and lower cost design. Studies were performed to determine the possible concentrations of radioactive material in the containment atmosphere and the effectiveness of the purge system to keep concentrations within 10CFR20 limits and within offsite dose objectives. The concentrations were determined for various reactor coolant system leakage rates and containment purge modes of operation. The resultant concentrations were used to determine the containment accessibility during various stages of normal plant operation including refueling. The results of the parametric studies indicate that a dual train purge system with a capacity of 4,000 cfm per train is more than adequate to control the airborne radioactivity levels inside containment during normal plant operation and refueling, and satisfies the goals of ANSI/ANS-56.6-1986 and limits the amount of radioactive material released to the environment per ANSI/ANS 59.2-1985 to provide a safe environment for plant personnel and offsite residents.

  12. SECTION IV: ATOMIC AND MOLECULAR SCIENCE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    IV: ATOMIC AND MOLECULAR SCIENCE A Pyroelectric Crystal Particle Accelerator ....................................................................................................................................................IV-1 J. Kalodimos and R.L. Watson Polarization of Ka Satellite Transitions in Potassium .....................................................................................................................................IV-4 K. S. Fruchey, R.L. Watson, V. Horvat, and Yong

  13. DNP 2015: APS Division of Nuclear Physics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Registration and Accommodation request The companion fee covers the reception and companions program that is held in parallel with the plenary session. Non-member registration is for non APS members who wish to attend the sessions or be a vendor at the meeting. DNP 2015 Registration fee schedule Date Members Non-Members Students/Unemployed Companion Before Sept. 2 $275 $600 $100 $50 After Sept. 2 $350 $700 $175 $60 On-Site $400 $800 $200 $75 Registration and hotel accommodations will be handled

  14. NERSC, LBL Researchers Share Materials Science Advances at APS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NERSC, LBL Researchers Highlight Materials Science at APS NERSC, LBL Researchers Share Materials Science Advances at APS March 3, 2014 APSlogo NERSC and Lawrence Berkeley National Laboratory (LBL) are well represented this week at the American Physical Society (APS) March meeting. Some 10,000 physicists, scientists, and students are expected to attend this year's meeting, which takes place March 3-7 in Denver, CO. Physicists and students will report on groundbreaking research from industry,

  15. EA-134-APS Arizona Public Service Company | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4-APS Arizona Public Service Company EA-134-APS Arizona Public Service Company Order authorizing Arizona Public Service Company to export electric energy to Mexico. EA-134-APS Arizona Public Service Company (24.95 KB) More Documents & Publications EA-184 Morgan Stanley Capital Group Inc. EA-166 Duke Energy Trading and Marketing, L.L.C EA-181 H.Q Energy Services (U.S) Inc

  16. PPPL researchers present cutting edge results at APS Plasma Physics...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PPPL researchers present cutting edge results at APS Plasma Physics Conference November ... Gallery: Fast-camera image showing plasma during magnetic reconnection. Fast-camera image ...

  17. APS and Synchrotron-related Employment Opportunities | Advanced...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Opportunities Groundbreaking science and engineering at the APS has a real and positive impact on our technologies, our health, our economy, and our fundamental understanding of...

  18. AP-3-B Wholesale Power Rate Schedule | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3-B Wholesale Power Rate Schedule AP-3-B Wholesale Power Rate Schedule Area: American ... American Electric Power Service Corporation (hereinafter called the Company), PJM ...

  19. AP-1-B Wholesale Power Rate Schedule | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1-B Wholesale Power Rate Schedule AP-1-B Wholesale Power Rate Schedule Area: American ... American Electric Power Service Corporation (hereinafter called the Company), the ...

  20. AP-2-B Wholesale Power Rate Schedule | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2-B Wholesale Power Rate Schedule AP-2-B Wholesale Power Rate Schedule Area: American ... American Electric Power Service Corporation (hereinafter called the Company), the ...

  1. AP-4-B Wholesale Power Rate Schedule | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4-B Wholesale Power Rate Schedule AP-4-B Wholesale Power Rate Schedule Area: American ... of American Electric Power Service Corporation (hereinafter called the Company) and ...

  2. APS - Solutions for Business Financing | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Equipment Program Info Sector Name Utility Administrator National Bank of Arizona Website http:www.aps.commainservicesSolutionsForBusinessfinancing.html Funding...

  3. CDM Accreditation Panel CDM AP | Open Energy Information

    Open Energy Info (EERE)

    Bonn, Germany Zip: 53153 Product: The CDM accreditation panel (CDM-AP) prepares the decision making of the Executive Board in accordance with the procedure for accrediting...

  4. Microsoft Word - 2007 Cross Cut - APS response.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    External Reviewer Douglas Ohlendorf, University of Minnesota, External Reviewer Wei Yang, NIH, Bethesda, APS SAC Introduction: The reviewers met at the Advanced Photon Source...

  5. Standard Missile Block IV battery

    SciTech Connect (OSTI)

    Martin, J.

    1996-11-01

    During the 1980`s a trend in automatic primary battery technologies was the replacement of silver-zinc batteries by thermal battery designs. The Standard missile (SM 2) Block IV development is a noteworthy reversal of this trend. The SM2, Block IV battery was originally attempted as a thermal battery with multiple companies attempting to develop a thermal battery design. These attempts resulted in failure to obtain a production thermal battery. A decision to pursue a silver-zinc battery design resulted in the development of a battery to supply the SM 2, Block IV (thermal battery design goal) and also the projected power requirements of the evolving SM 2, Block IVA in a single silver-zinc battery design. Several advancements in silver-zinc battery technology were utilized in this design that improve the producibility and extend the boundaries of silver-zinc batteries.

  6. APS team works smarter, cuts substation construction costs by 36%

    SciTech Connect (OSTI)

    Not Available

    1993-05-01

    An aggressive, cost-cutting, team of T D employees at Arizona Public Service Co (APS) is building a new distribution substation in Phoenix for less than half the original cost that APS planners had calculated for the project's land, labor and materials. Scheduled for service in June of this year, APS analysts had originally projected land, labor and materials costs for the 20-MVA Bell substation at nearly $1.7-million-not including major equipment such as transformers, circuit breakers, and switches. However, after studying the project, an empowered APS crew was able to slash 36% off the original estimate-more than $610,000. What's more, APS spokesmen say that its new approach to substation construction and design has given its engineers and construction crews a laundry list of additional ideas to try out on future substation ventures. 4 figs., 1 tab.

  7. KCAT, Xradia, ALS and APS Performance Summary

    SciTech Connect (OSTI)

    Waters, A; Martz, H; Brown, W

    2004-09-30

    At Lawrence Livermore National Laboratory (LLNL) particular emphasis is being placed on the nondestructive characterization (NDC) of components, subassemblies and assemblies of millimeter-size extent with micrometer-size features (mesoscale). These mesoscale objects include materials that vary widely in composition, density, geometry and embedded features. Characterizing these mesoscale objects is critical for corroborating the physics codes that underlie LLNL's Stockpile Stewardship mission. In this report we present results from our efforts to quantitatively characterize the performance of several x-ray systems in an effort to benchmark existing systems and to determine which systems may have the best potential for our mesoscale imaging needs. Several different x-ray digital radiography (DR) and computed tomography (CT) systems exist that may be applicable to our mesoscale object characterization requirements, including microfocus and synchrotron systems. The systems we have benchmarked include KCAT (LLNL developed) and Xradia {mu}XCT (Xradia, Inc., Concord, CA), both microfocus systems, and Beamline 1-ID at the Advance Photon Source (APS) and the Tomography Beamline at the Advanced Light Source (ALS), both synchrotron based systems. The ALS Tomography Beamline is a new installation, and the data presented and analyzed here is some of the first to be acquired at the facility. It is important to note that the ALS system had not yet been optimized at the time we acquired data. Results for each of these systems has been independently documented elsewhere. In this report we summarize and compare the characterization results for these systems.

  8. Eastman, AP start on coal unit

    SciTech Connect (OSTI)

    1995-10-25

    Eastman Chemical and Air Products and Chemicals (AP) have started construction of a $214-million, coal-to-methanol demonstration unit at Eastmans site in Kingsport, TN. The project is part of the Department of Energy`s clean coal technology program and is receiving $93 million in federal support. The demonstration unit-which will have a methanol capacity of 260 tons/day-will use novel catalyst technology for converting coal-derived synthesis gas (syngas) to methanol. Unlike conventional technology that processes syngas through a fixed bed of dry catalyst particles, the liquid-phase methanol process converts the syngas in a single vessel containing catalysts suspended in mineral oil. The companies say the innovation allows the process to better able handle the gases from coal gasifiers and is more stable and reliable than existing processes. Eastman says it will use the methanol produced by the plant as a chemical feedstock. It currently uses methanol as an intermediate in making acetic anhydride and dimethyl terephthalate. In addition, the companies say the methanol will be evaluated as a feedstock in making methyl tert-butyl ether for reformulated fuels. Eastman also says it will evaluate coproducing dimethyl ether (DME) with the methanol. DME can be used as a fuel additive or blended with methanol for a chemical feedstock, according to Eastman.

  9. Facile Routes to Th(IV), U(IV), and Np(IV) Phosphites and Phosphates

    SciTech Connect (OSTI)

    Villa, Eric M.; Wang, Shuao; Alekseev, Evgeny V.; Depmeier, Wulf; Albrecht-Schmitt, Thomas E.

    2011-08-05

    Three actinide(IV) phosphites and a NpIV phosphate, AnIV(HPO₃)₂(H₂O)₂ (An = Th, U, Np) and Cs[Np(H1.5PO₄)(PO₄)]₂, respectively, were synthesized using mild hydrothermal conditions. The first three phases are isotypic and were obtained using similar reaction conditions. Cs[Np(H1.5PO₄)(PO₄)]₂ was synthesized using an analogous method to that of Np(HPO₃)₂(H₂O)₂. However, this fourth phase is quite different in comparison to the other phases in both composition and structure. The structure of Cs[Np(H1.5PO₄)(PO₄)]₂ is constructed from double layers of neptunium(IV) phosphate with caesium cations in the interlayer region. In contrast, An(HPO₃)₂(H₂O)₂ (An = Th, U, Np) form dense 3D networks. The actinide contraction is detected in variety of metrics obtained from single-crystal X-ray diffraction data. Changes in the oxidation state of the neptunium starting materials yield different products.

  10. ES Energy Spa | Open Energy Information

    Open Energy Info (EERE)

    Energy Spa Jump to: navigation, search Name: ES Energy Spa Place: Rome, Italy Zip: 144 Sector: Wind energy Product: A company that operates a wind turbine power station on...

  11. Thermal Decomposition Characteristics of Orthorhombic Ammonium Perchlorate (o-AP) and an 0-AP/HTPB-Based Propellant

    SciTech Connect (OSTI)

    BEHRENS JR.,RICHARD; MINIER,LEANNA M.G.

    1999-10-25

    A study to characterize the low-temperature reactive processes for o-AP and an AP/HTPB-based propellant (class 1.3) is being conducted in the laboratory using the techniques of simultaneous thermogravimetric modulated beam mass spectrometry (STMBMS) and scanning electron microscopy (SEM). The results presented in this paper are a follow up of the previous work that showed the overall decomposition to be complex and controlled by both physical and chemical processes. The decomposition is characterized by the occurrence of one major event that consumes up to {approx}35% of the AP, depending upon particle size, and leaves behind a porous agglomerate of AP. The major gaseous products released during this event include H{sub 2}O, O{sub 2}, Cl{sub 2}, N{sub 2}O and HCl. The recent efforts provide further insight into the decomposition processes for o-AP. The temporal behaviors of the gas formation rates (GFRs) for the products indicate that the major decomposition event consists of three chemical channels. The first and third channels are affected by the pressure in the reaction cell and occur at the surface or in the gas phase above the surface of the AP particles. The second channel is not affected by pressure and accounts for the solid-phase reactions characteristic of o-AP. The third channel involves the interactions of the decomposition products with the surface of the AP. SEM images of partially decomposed o-AP provide insight to how the morphology changes as the decomposition progresses. A conceptual model has been developed, based upon the STMBMS and SEM results, that provides a basic description of the processes. The thermal decomposition characteristics of the propellant are evaluated from the identities of the products and the temporal behaviors of their GFRs. First, the volatile components in the propellant evolve from the propellant as it is heated. Second, the hot AP (and HClO{sub 4}) at the AP-binder interface oxidize the binder through reactions that

  12. Clear Path IV Exercise Summary Report

    Broader source: Energy.gov [DOE]

    In April 2016, DOE led Clear Path IV in Portland, Oregon and Washington, DC. Clear Path IV was an interagency exercise focused on testing and evaluating energy sector response plans to address...

  13. AP600 design certification thermal hydraulics testing and analysis

    SciTech Connect (OSTI)

    Hochreiter, L.E.; Piplica, E.J.

    1995-09-01

    Westinghouse Electric Corporation, in conjunction with the Department of Energy and the Electric Power Research Institute, have been developing an advanced light water reactor design; the AP600. The AP600 is a 1940 Mwt, 600Mwe unit which is similar to a Westinghouse two-loop Pressurized Water Reactor. The accumulated knowledge on reactor design to reduce the capital costs, construction time, and the operational and maintenance cost of the unit once it begins to generate electrical power. The AP600 design goal is to maintain an overall cost advantage over fossil generated electrical power.

  14. AP-XPS Measures MIEC Oxides in Action

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AP-XPS Measures MIEC Oxides in Action Print Oxide materials with mixed ionic-electronic conductivity (MIEC) can conduct both electrons and oxygen ions. MIEC oxides have broad...

  15. A hot-spare injector for the APS linac.

    SciTech Connect (OSTI)

    Lewellen, J. W.

    1999-04-13

    Last year a second-generation SSRL-type thermionic cathode rf gun was installed in the Advanced Photon Source (APS) linac. This gun (referred to as ''gun2'') has been successfully commissioned and now serves as the main injector for the APS linac, essentially replacing the Koontz-type DC gun. To help ensure injector availability, particularly with the advent of top-up mode operation at the APS, a second thermionic-cathode rf gun will be installed in the APS linac to act as a hot-spare beam source. The hot-spare installation includes several unique design features, including a deep-orbit Panofsky-style alpha magnet. Details of the hot-spare beamline design and projected performance are presented, along with some plans for future performance upgrades.

  16. 2012 APS-DPP Plasma Science Expo, Providence, RI | Princeton...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    APS-DPP Plasma Science Expo, Providence, RI View larger image IMG 1847 View larger image IMG 1598 View larger image IMG 1608 View larger image IMG 1609 View larger image IMG 1614...

  17. Microsoft Word - APS10_Highlight_I-mode

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    in Alcator C-Mod , to be presented by Amanda Hubbard at 52nd Annual Meeting of the APS Division of Plasma Physics, November 8-12, 2010 Chicago, IL, 02:00 PM on Wednesday,...

  18. Physicist honored with new APS award | Princeton Plasma Physics Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Physicist honored with new APS award By Jeanne Jackson DeVoe December 10, 2014 Tweet Widget Google Plus One Share on Facebook Ilya Dodin Ilya Dodin It's fitting that Theory Department physicist Ilya Dodin was the first to receive the American Physical Society's Thomas H. Stix Award for Outstanding Early Career Contributions to Plasma Physics Research. Dodin, honored at the annual APS-Division of Plasma Physics meeting in New Orleans in October, was recognized for his research on waves in

  19. AP-XPS Measures MIEC Oxides in Action

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AP-XPS Measures MIEC Oxides in Action AP-XPS Measures MIEC Oxides in Action Print Wednesday, 25 May 2011 00:00 Oxide materials with mixed ionic-electronic conductivity (MIEC) can conduct both electrons and oxygen ions. MIEC oxides have broad applications, including use in solid-oxide fuel cells, high-temperature electrolysis for synthetic fuel production, and oxygen-separating membranes for chemical processes or NOx-free combustion; however, their surface activity under reaction conditions has

  20. Westinghouse Completes its AP1000® Test Stand

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Completes its AP1000® Test Stand Last June, CASL launched its first Virtual Environment for Reactor Applications (VERA) Test Stand on the Westinghouse engineering computer cluster. Westinghouse selected the AP1000® pressurized water reactor (PWR) first core for the Test Stand simulation because its advanced design and operational features, and imminent deployment in units under construction, make it a particularly relevant and engaging application of CASL technology. The Westinghouse Test

  1. Los Alamos scientists join prestigious ranks of APS fellows

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    scientists join prestigious ranks of APS fellows Los Alamos scientists join prestigious ranks of APS fellows Cristian Batista, Malcolm Boshier, Dana Dattelbaum, Stephen Doorn, Michelle Espy, George Rodriguez, Avadh Saxena, Sergei Tretiak and Lin Yin are the new honorees. February 23, 2015 Nine Los Alamos National Laboratory scientists were selected as fellows of the American Physical Society. Nine Los Alamos National Laboratory scientists were selected as fellows of the American Physical

  2. APS Recent Publications | For the week ending 01.03.2016

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    list of entries in the APS Publications Database does not include abstracts, invited talks, awards, magazine articles, or patents. For complete lists, search the APS Publications...

  3. Final characterization and safety screen report of double shell tank 241-AP-105 for evaporator campaign 97-1

    SciTech Connect (OSTI)

    Miller, G.L.

    1997-01-20

    Evaporator candidate feed from tank 241-AP-105 (hereafter referred to as AP-105) was characterized for physical, inorganic, organic and radiochemical parameters by the 222-S Laboratory as directed by the Tank Sample and Analysis Plan (TSAP), References 1 through 4, and Engineering Change Notice, number 635332, Reference 5. This data package satisfies the requirement for a format IV, final report as described in Reference 1. This data package is also a follow-up to the 45-Day safety screen results for tank AP-105, Reference 8, which was issued on November 5, 1996, and is attached as Section II to this report. Preliminary data in the form of summary analytical tables were provided to the project in advance of this final report to enable early estimation of evaporator operational parameters, using the Predict modeling program. Analyses were performed at the 222-S Laboratory as defined and specified in the TSAP and the Laboratory's Quality Assurance P1an, References 6 and 7. Any deviations from the instructions documented in the TSAP are discussed in this narrative and are supported with additional documentation.

  4. Figure ES1. Map of Northern Alaska

    U.S. Energy Information Administration (EIA) Indexed Site

    Figure ES1. Map of Northern Alaska figurees1.jpg (61418 bytes) Source: Edited from U.S. Geological Survey, "The Oil and Gas Resource Potential of the Arctic National Wildlife Refuge 1002 Area, Alaska," Open File Report 98-34, 1999. Return to the Executive Summary.

  5. ARM/NSA ES&H Policy Statement

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Facility North Slope of AlaskaAdjacent Arctic Ocean (ACRFNSAAAO) ES&H Policy Statement The ACRFNSAAAO ES&H Policy Statement describes the general safety-related ...

  6. Home Performance with ENERGY STAR (HPwES) Stakeholder Meeting

    Broader source: Energy.gov [DOE]

    Provides an update on the HPwES program, near term program goals, success stories, stakeholder comments on the HPwES v2 proposal, and next steps.

  7. ES&H Newsletter - Spring 2015 | Princeton Plasma Physics Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Weekly Highlights Brochures Fact Sheets Newsletters PPPL News Quest Princeton Journal Watch Blog PPPL Experts Research at Princeton ES&H Newsletter - Spring 2015 ES&H Newsletter - ...

  8. ES&H Newsletter - Fall 2015 | Princeton Plasma Physics Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Weekly Highlights Brochures Fact Sheets Newsletters PPPL News Quest Princeton Journal Watch Blog PPPL Experts Research at Princeton ES&H Newsletter - Fall 2015 ES&H Newsletter - ...

  9. Trexler Climate Energy Services TC ES | Open Energy Information

    Open Energy Info (EERE)

    Trexler Climate Energy Services TC ES Jump to: navigation, search Name: Trexler Climate + Energy Services (TC + ES) Place: Portland, Oregon Zip: 97214 Sector: Services Product:...

  10. UNlTED ST.~.-1-ES DEPARTMENT OF THE INTERIOR BUREAU OF MINES

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    c ::- F : C ~ er -;-;-! C C i ~ C C 70R UNlTED ST.~.-1-ES DEPARTMENT OF THE INTERIOR BUREAU OF MINES WASHINGTON, D.C. 202~0 CERTIFICATE OF RECOGNITION _.,...,. .( . * i_. / ,,. . ,: ~,.* ' ' ,,.-- T~ e ~ ~ti.anal Federation of Federal Employees Local 1141 is hereby recognized as ti1e EXCL'LiSi v-= re presentative of that unit of employees which is defined as all ungraded e~p l oyees exclusive of Foremen II, III, and IV of the Albany Metallurgy Research Center, U. S. Bureau of Mines, Alb&ny,

  11. SECTION IV: ATOMIC AND MOLECULAR SCIENCE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    collisions... IV-3 R. D. DuBois, A. C. F. Santos, R. Olson, V. Horvat, R. L. Watson, A. N. Perumal, and Y. Peng...

  12. Generation IV International Forum Updates Technology Roadmap...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    status of the Lead Fast Reactor and Sodium Fast Reactor (SFR) Generation IV concepts, ... Agency's International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO). ...

  13. Generation IV International Forum Framework Agreement Extended...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Related Articles Generation IV International Forum Signs Agreement to Collaborate on Sodium Cooled Fast Reactors Renewed energy and enhanced coordination are on the horizon for an ...

  14. SECTION IV: ATOMIC, MOLECULAR AND MATERIALS SCIENCE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Systematics of K and L x-ray satellite spectra...... IV-1 V. Horvat and R. L. Watson K x-ray satellite ...

  15. Paleontologists research the Tully Monster at APS | Argonne National

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Laboratory Paleontologists research the Tully Monster at APS Share Browse By - Any - General Argonne Information Energy -Energy efficiency --Vehicles ---Alternative fuels ---Automotive engineering ---Diesel ---Electric drive technology ---Hybrid & electric vehicles ---Hydrogen & fuel cells ---Internal combustion ---Powertrain research --Building design ---Construction --Manufacturing -Energy sources --Renewable energy ---Bioenergy ---Solar energy --Fossil fuels ---Natural Gas

  16. Studying unexplained veteran illnesses at the APS | Argonne National

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Laboratory Studying unexplained veteran illnesses at the APS Share Browse By - Any - General Argonne Information Energy -Energy efficiency --Vehicles ---Alternative fuels ---Automotive engineering ---Diesel ---Electric drive technology ---Hybrid & electric vehicles ---Hydrogen & fuel cells ---Internal combustion ---Powertrain research --Building design ---Construction --Manufacturing -Energy sources --Renewable energy ---Bioenergy ---Solar energy --Fossil fuels ---Natural Gas

  17. ES&H Policy Statement | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ES&H Policy Statement ES&H Policy Statement As we work to achieve the Y-12 mission and our vision of a modernized Y-12 Complex, we will do so by ensuring the safety and health of ...

  18. Figure ES2. Annual Indices of Real Disposable Income, Vehicle...

    U.S. Energy Information Administration (EIA) Indexed Site

    ES2 Figure ES2. Annual Indices of Real Disposable Income, Vehicle-Miles Traveled, Consumer Price Index (CPI-U), and Real Average Retail Gasoline Price, 1978-2004, 1985100...

  19. SECTION IV: ATOMIC, MOLECULAR AND MATERIALS SCIENCE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ATOMIC, MOLECULAR AND MATERIALS SCIENCE A semiempirical scaling law for target K x-ray production in heavy ion collisions...... IV-1 R. L. Watson, Y. Peng, V. Horvat, and A. ...

  20. Periodic Trends in Highly Dispersed Groups IV and V Supported...

    Office of Scientific and Technical Information (OSTI)

    Periodic Trends in Highly Dispersed Groups IV and V Supported Metal Oxide Catalysts for ... Title: Periodic Trends in Highly Dispersed Groups IV and V Supported Metal Oxide Catalysts ...

  1. Solar Energy Education. Reader, Part IV. Sun schooling (Technical...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Reader, Part IV. Sun schooling Citation Details In-Document Search Title: Solar Energy Education. Reader, Part IV. Sun schooling You are accessing a document from the Department ...

  2. Victory Gardens Phase IV Wind Farm II | Open Energy Information

    Open Energy Info (EERE)

    II Jump to: navigation, search Name Victory Gardens Phase IV Wind Farm II Facility Victory Gardens- Phase IV Sector Wind energy Facility Type Commercial Scale Wind Facility Status...

  3. Generation IV International Forum 39th Policy Group Meeting ...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Related Articles China and Russia to Join the Generation IV International Forum Generation IV International Forum Signs Agreement to Collaborate on Sodium Cooled Fast Reactors

  4. Annex IV Environmental Webinar: Marine Renewable Energy Test...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Annex IV Environmental Webinar: Marine Renewable Energy Test Centers and Environmental Effects Research Annex IV Environmental Webinar: Marine Renewable Energy Test Centers and...

  5. Onboard Type IV Compressed Hydrogen Storage System Cost Analysis...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Onboard Type IV Compressed Hydrogen Storage System Cost Analysis Webinar Onboard Type IV Compressed Hydrogen Storage System Cost Analysis Webinar Access the recording and download ...

  6. Medicine Bow Wind Farm IV | Open Energy Information

    Open Energy Info (EERE)

    IV Jump to: navigation, search Name Medicine Bow Wind Farm IV Facility Medicine Bow Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service Owner Platte...

  7. Annex IV Environmental Webinar: Adaptive Management in the Marine...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Annex IV Environmental Webinar: Adaptive Management in the Marine Renewable Energy Industry Annex IV Environmental Webinar: Adaptive Management in the Marine Renewable Energy ...

  8. EIS-0469: Wilton IV Wind Energy Center; Burleigh County, North...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    9: Wilton IV Wind Energy Center; Burleigh County, North Dakota EIS-0469: Wilton IV Wind Energy Center; Burleigh County, North Dakota Summary Western Area Power Administration is...

  9. NERSC User James Drake Receives 2010 APS Maxwell Prize for Plasma...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User James Drake Receives 2010 APS Maxwell Prize for Plasma Physics NERSC User James Drake Receives 2010 APS Maxwell Prize for Plasma Physics January 31, 2011 drake10.jpg Long-time...

  10. KP-AP-4-C Wholesale Power Rate Schedule | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AP-4-C Wholesale Power Rate Schedule KP-AP-4-C Wholesale Power Rate Schedule Area: American Electric Power System: Kerr-Philpott This rate schedule shall be available to public ...

  11. AP-XPS Measures MIEC Oxides in Action

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AP-XPS Measures MIEC Oxides in Action Print Oxide materials with mixed ionic-electronic conductivity (MIEC) can conduct both electrons and oxygen ions. MIEC oxides have broad applications, including use in solid-oxide fuel cells, high-temperature electrolysis for synthetic fuel production, and oxygen-separating membranes for chemical processes or NOx-free combustion; however, their surface activity under reaction conditions has been difficult, if not impossible, to ascertain, until recently. A

  12. AP-XPS Measures MIEC Oxides in Action

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AP-XPS Measures MIEC Oxides in Action Print Oxide materials with mixed ionic-electronic conductivity (MIEC) can conduct both electrons and oxygen ions. MIEC oxides have broad applications, including use in solid-oxide fuel cells, high-temperature electrolysis for synthetic fuel production, and oxygen-separating membranes for chemical processes or NOx-free combustion; however, their surface activity under reaction conditions has been difficult, if not impossible, to ascertain, until recently. A

  13. AP-XPS Measures MIEC Oxides in Action

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AP-XPS Measures MIEC Oxides in Action Print Oxide materials with mixed ionic-electronic conductivity (MIEC) can conduct both electrons and oxygen ions. MIEC oxides have broad applications, including use in solid-oxide fuel cells, high-temperature electrolysis for synthetic fuel production, and oxygen-separating membranes for chemical processes or NOx-free combustion; however, their surface activity under reaction conditions has been difficult, if not impossible, to ascertain, until recently. A

  14. AP-XPS Measures MIEC Oxides in Action

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AP-XPS Measures MIEC Oxides in Action Print Oxide materials with mixed ionic-electronic conductivity (MIEC) can conduct both electrons and oxygen ions. MIEC oxides have broad applications, including use in solid-oxide fuel cells, high-temperature electrolysis for synthetic fuel production, and oxygen-separating membranes for chemical processes or NOx-free combustion; however, their surface activity under reaction conditions has been difficult, if not impossible, to ascertain, until recently. A

  15. AP-XPS Measures MIEC Oxides in Action

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AP-XPS Measures MIEC Oxides in Action Print Oxide materials with mixed ionic-electronic conductivity (MIEC) can conduct both electrons and oxygen ions. MIEC oxides have broad applications, including use in solid-oxide fuel cells, high-temperature electrolysis for synthetic fuel production, and oxygen-separating membranes for chemical processes or NOx-free combustion; however, their surface activity under reaction conditions has been difficult, if not impossible, to ascertain, until recently. A

  16. PPPL researchers present cutting edge results at APS Plasma Physics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Conference | Princeton Plasma Physics Lab PPPL researchers present cutting edge results at APS Plasma Physics Conference November 10, 2014 Tweet Widget Google Plus One Share on Facebook Conceptual image of the solar wind from the sun encountering the Earth's magnetosphere. Conceptual image of the solar wind from the sun encountering the Earth's magnetosphere. Gallery: Fast-camera image showing plasma during magnetic reconnection. Fast-camera image showing plasma during magnetic reconnection.

  17. 2014 APS/CNM/EMC Users Meeting | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    14 APS/CNM/EMC Users Meeting May 12-15, 2014 Meeting web site CNM-Specific Events Andreas Roelofs, Interim CNM Director CNM Facility Status Update CNM Plenary Session Keynote Speaker : Federico Capasso Robert L. Wallace Professor of Applied Physics and Vinton Hayes Senior Research Fellow in Electrical Engineering Harvard University "Flat Optics with Metasurfaces" David Schuster Physics Department and James Franck Institute University of Chicago "Hybrid Quantum Computing with

  18. ARM - Field Campaign - ARM Airborne Carbon Measurements IV (ARM-ACME IV)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    govCampaignsARM Airborne Carbon Measurements IV (ARM-ACME IV) Campaign Links Final Campaign Report ARM Data Discovery Browse Data Related Campaigns ARM Airborne Carbon Measurements (ARM-ACME) 2008.10.01, Biraud, AAF Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Campaign : ARM Airborne Carbon Measurements IV (ARM-ACME IV) 2013.10.01 - 2015.09.30 Lead Scientist : Sebastien Biraud For data sets, see below. Abstract ARM ACME observations and

  19. Generic effluent monitoring system certification for AP-40 exhauster stack

    SciTech Connect (OSTI)

    Glissmeyer, J.A.; Davis, W.E.; Bussell, J.H.; Maughan, A.D.

    1997-09-01

    Tests were conducted to verify that the Generic Effluent Monitoring System (GEMS), as applied to the AP-40 exhauster stack, meets all applicable regulatory performance criteria for air sampling systems at nuclear facilities. These performance criteria address both the suitability of the air sampling probe location and the transport of the sample to the collection devices. The criteria covering air sampling probe location ensure that the contaminants in the stack are well mixed with the airflow at the probe location such that the extracted sample represents the whole. The sample transport criteria ensure that the sampled contaminants are quantitatively delivered to the collection device. The specific performance criteria are described in detail in the report. The tests demonstrated that the GEMS/AP-40 system meets all applicable performance criteria. The contaminant mixing tests were conducted by Pacific Northwest National Laboratory (PNNL) at the wind tunnel facility, 331-H Building, using a mockup of the actual stack. The particle sample transport tests were conducted by PNNL at the Numatec Hanford Company`s 305 Building. The AP-40 stack is typical of several 10-in. diameter stacks that discharge the filtered ventilation air from tank farms at the U.S. Department of Energy`s Hanford Site in Richland, Washington. The GEMS design features a probe with a single shrouded sampling nozzle, a sample delivery line, and sample collection system. The collection system includes a filter holder to collect the sample of record and an in-line detector head and filter for monitoring beta radiation-emitting particles. Unrelated to the performance criteria, it was found that the record sample filter holder exhibited symptoms of sample bypass around the particle collection filter. This filter holder should either be modified or replaced with a different type. 10 refs., 8 figs., 6 tabs.

  20. Incommensurate Structure of Phosphorus Phase IV

    SciTech Connect (OSTI)

    Fujihisa, Hiroshi; Gotoh, Yoshito; Yamawaki, Hiroshi; Sakashita, Mami; Takeya, Satoshi; Honda, Kazumasa; Akahama, Yuichi; Kawamura, Haruki; Ohishi, Yasuo

    2007-04-27

    There are six known phases for phosphorus at room temperature under high pressure. Only the structure of phase IV, which exists from 107 GPa to 137 GPa, remains unsolved. We performed a powder x-ray diffraction experiment and a Rietveld analysis and successfully determined its structure to be an incommensurately modulated structure by only 1 site of atomic position. High-pressure phases of halogens and chalcogens have previously been shown to have a similar modulated structure; however, phosphorus phase IV is different from them and was shown to be the third case.

  1. APS beamline standard components handbook, Version 1. 3

    SciTech Connect (OSTI)

    Hahn, U.; Shu, D.; Kuzay, T.M.

    1993-02-01

    This Handbook in its current version (1.3) contains descriptions, specifications, and preliminary engineering design drawings for many of the standard components. The design status and schedules have been provided wherever possible. In the near future, the APS plans to update engineering drawings of identified standard beamline components and complete the Handbook. The completed version of this Handbook will become available to both the CATs and potential vendors. Use of standard components should result in major cost reductions for CATs in the areas of beamline design and construction.

  2.  Westinghouse Completes its AP1000 Test Stand

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

     Westinghouse Completes its AP1000 Test Stand  VERA-CS Coupled Multi-physics Capability demonstrated in a Full-core Simulation  TVA provides Watts Bar Operating Data to Support Validation of CASL Tools  University of Michigan adds Depletion Capability to MPACT for VERA-CS  VERA Data Transfer Processes Provided by DTK  Alternate Coupling Algorithm Investigations Completed  Role of HPC in the Nuclear Power Industry  TVA Test Stand Launched November 2013 Volume 1, Issue 4

  3. Pacific Hydro Brazil formerly SES Solu es de Energias Sustent...

    Open Energy Info (EERE)

    Hydro Brazil formerly SES Solu es de Energias Sustent veis Jump to: navigation, search Name: Pacific Hydro Brazil (formerly SES - Solues de Energias Sustentveis) Place:...

  4. ES&H Newsletter - Summer 2016 | Princeton Plasma Physics Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ES&H Newsletter - Summer 2016 ES&H Newsletter - Summer 2016 Publication File: PDF icon ES&H Newsletter - Summer 2016 Publication Type: Newsletters

  5. Industrial Waste Landfill IV upgrade package

    SciTech Connect (OSTI)

    Not Available

    1994-03-29

    The Y-12 Plant, K-25 Site, and ORNL are managed by DOE`s Operating Contractor (OC), Martin Marietta Energy Systems, Inc. (Energy Systems) for DOE. Operation associated with the facilities by the Operating Contractor and subcontractors, DOE contractors and the DOE Federal Building result in the generation of industrial solid wastes as well as construction/demolition wastes. Due to the waste streams mentioned, the Y-12 Industrial Waste Landfill IV (IWLF-IV) was developed for the disposal of solid industrial waste in accordance to Rule 1200-1-7, Regulations Governing Solid Waste Processing and Disposal in Tennessee. This revised operating document is a part of a request for modification to the existing Y-12 IWLF-IV to comply with revised regulation (Rule Chapters 1200-1-7-.01 through 1200-1-7-.08) in order to provide future disposal space for the ORR, Subcontractors, and the DOE Federal Building. This revised operating manual also reflects approved modifications that have been made over the years since the original landfill permit approval. The drawings referred to in this manual are included in Drawings section of the package. IWLF-IV is a Tennessee Department of Environmental and Conservation/Division of Solid Waste Management (TDEC/DSWM) Class 11 disposal unit.

  6. Cours-IV/Clavin2015.key

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Jump across an hydrodynamic discontinuity IV 1) U L U b - U L Flame Unburnt mixture at rest Burnt gas Zoom T b T u d L Temperature u + 0 u u U L b U b p + u 2 + 0 w +...

  7. PART IV … REPRESENTATIONS AND INSTRUCTIONS

    National Nuclear Security Administration (NNSA)

    K, Page i PART IV - REPRESENTATIONS AND INSTRUCTIONS SECTION K REPRESENTATIONS, CERTIFICATIONS, AND OTHER STATEMENTS OF OFFERORS K-1 FAR 52.204-8 ANNUAL REPRESENTATIONS AND CERTIFICATIONS (DEC 2014) .................. 131 K-2 FAR 52.204-16 COMMERCIAL AND GOVERNMENT ENTITY CODE REPORTING (JUL 2015) ...................................................................................................................................................................... 135 K-3 FAR 52.209-7 INFORMATION

  8. PART IV … REPRESENTATIONS AND INSTRUCTIONS

    National Nuclear Security Administration (NNSA)

    K, Page i PART IV - REPRESENTATIONS AND INSTRUCTIONS SECTION K REPRESENTATIONS, CERTIFICATIONS, AND OTHER STATEMENTS OF OFFERORS K-1 FAR 52.204-8 ANNUAL REPRESENTATIONS AND CERTIFICATIONS (DEC 2014) .................. 131 K-2 FAR 52.204-16 COMMERCIAL AND GOVERNMENT ENTITY CODE REPORTING (JUL 2015) ...................................................................................................................................................................... 135 K-3 FAR 52.209-7 INFORMATION

  9. Gen IV Materials Handbook Implementation Plan

    SciTech Connect (OSTI)

    Rittenhouse, P.; Ren, W.

    2005-03-29

    A Gen IV Materials Handbook is being developed to provide an authoritative single source of highly qualified structural materials information and materials properties data for use in design and analyses of all Generation IV Reactor Systems. The Handbook will be responsive to the needs expressed by all of the principal government, national laboratory, and private company stakeholders of Gen IV Reactor Systems. The Gen IV Materials Handbook Implementation Plan provided here addresses the purpose, rationale, attributes, and benefits of the Handbook and will detail its content, format, quality assurance, applicability, and access. Structural materials, both metallic and ceramic, for all Gen IV reactor types currently supported by the Department of Energy (DOE) will be included in the Gen IV Materials Handbook. However, initial emphasis will be on materials for the Very High Temperature Reactor (VHTR). Descriptive information (e.g., chemical composition and applicable technical specifications and codes) will be provided for each material along with an extensive presentation of mechanical and physical property data including consideration of temperature, irradiation, environment, etc. effects on properties. Access to the Gen IV Materials Handbook will be internet-based with appropriate levels of control. Information and data in the Handbook will be configured to allow search by material classes, specific materials, specific information or property class, specific property, data parameters, and individual data points identified with materials parameters, test conditions, and data source. Details on all of these as well as proposed applicability and consideration of data quality classes are provided in the Implementation Plan. Website development for the Handbook is divided into six phases including (1) detailed product analysis and specification, (2) simulation and design, (3) implementation and testing, (4) product release, (5) project/product evaluation, and (6) product

  10. Functional design criteria 241-AP-102 Flexible Receiver System

    SciTech Connect (OSTI)

    Roblyer, S.P.

    1995-02-16

    A mixer pump was installed in the 1.07 m (42-in.) riser of the central pump pit of tank 241-AP-102 to mitigate potential fluid separation particle sedimentation by mixing the tank`s contents. The mixer pump performed this function until failure. Its removal is now necessary to meet possible tank content removal commitments or other corrective actions. The proposed removal procedure requires a flexible receiver that will provide a barrier to contamination during removal and transfer of the pump to the mixer pump storage container. This document describes the functional design criteria of the flexible receiver. These criteria include the functional and performance requirements of the flexible receiver as a barrier to contamination during normal conditions and contingencies and the instrumentation requirements.

  11. The chemical abundances of the Ap star HD94660

    SciTech Connect (OSTI)

    Giarrusso, M. [Universit di Catania, Dipartimento di Fisica e Astronomia, Sezione Astrofisica, Via S. Sofia 78, 95123 Catania (Italy); INAF - Osservatorio Astrofisico di Catania, via S. Sofia 78, 95123 Catania (Italy); INFN - Laboratori Nazionali del Sud (Italy)

    2014-05-09

    In this work I present the determination of chemical abundances of the Ap star HD94660, a possible rapid oscillating star. As all the magnetic chemically peculiar objects, it presents CNO underabundance and overabundance of iron peak elements of ?100 times and of rare earths up to 4 dex with respect to the Sun. The determination was based on the conversion of the observed equivalent widths into abundances simultaneously to the determination of effective temperature and gravity. Since the Balmer lines of early type stars are very sensitive to the surface gravity while the flux distribution is sensitive to the effective temperature, I have adopted an iterative procedure to match the H{sub ?} line profile and the observed UV-Vis-NIR magnitudes of HD94660 looking for a consistency between the metallicity of the atmosphere model and the derived abundances. From my spectroscopic analysis, this star belongs to the no-rapid oscillating class.

  12. Fabrication and Testing of Deflecting Cavities for APS

    SciTech Connect (OSTI)

    Mammosser, John; Wang, Haipeng; Rimmer, Robert; Jim, Henry; Katherine, Wilson; Dhakal, Pashupati; Ali, Nassiri; Jim, Kerby; Jeremiah, Holzbauer; Genfa, Wu; Joel, Fuerst; Yawei, Yang; Zenghai, Li

    2013-09-01

    Jefferson Lab (Newport News, Virginia) in collaboration with Argonne National Laboratory (Argonne, IL) has fabricated and tested four first article, 2.8 GHz, deflecting SRF cavities, for Argonne's Short-Pulse X-ray (SPX) project. These cavities are unique in many ways including the fabrication techniques in which the cavity cell and waveguides were fabricated. These cavity subcomponents were milled from bulk large grain niobium ingot material directly from 3D CAD files. No forming of sub components was used with the exception of the beam-pipes. The challenging cavity and helium vessel design and fabrication results from the stringent RF performance requirements required by the project and operation in the APS ring. Production challenges and fabrication techniques as well as testing results will be discussed in this paper.

  13. HPV16 E6 and E6AP differentially cooperate to stimulate or augment Wnt signaling

    SciTech Connect (OSTI)

    Sominsky, Sophia; Kuslansky, Yael; Shapiro, Beny; Jackman, Anna; Haupt, Ygal; Rosin-Arbesfeld, Rina; Sherman, Levana

    2014-11-15

    The present study investigated the roles of E6 and E6AP in the Wnt pathway. We showed that E6 levels are markedly reduced in cells in which Wnt signaling is activated. Coexpression of wild-type or mutant E6AP (C820A) in Wnt-activated cells stabilized E6 and enhanced Wnt/β-catenin/TCF transcription. Expression of E6AP alone in nonstimulated cells elevated β-catenin level, promoted its nuclear accumulation, and activated β-catenin/TCF transcription. A knockdown of E6AP lowered β-catenin levels. Coexpression with E6 intensified the activities of E6AP. Further experiments proved that E6AP/E6 stabilize β-catenin by protecting it from proteasomal degradation. This function was dependent on the catalytic activity of E6AP, the kinase activity of GSK3β and the susceptibility of β-catenin to GSK3β phosphorylation. Thus, this study identified E6AP as a novel regulator of the Wnt signaling pathway, capable of cooperating with E6 in stimulating or augmenting Wnt/β-catenin signaling, thereby possibly contributing to HPV carcinogenesis. - Highlights: • The roles of E6 and E6AP in the Wnt pathway were investigated. • E6AP stabilizes E6 and enhances E6 activity in augmentation of Wnt signaling. • E6AP cooperates with E6 to stabilize β-catenin and stimulate Wnt/β-catenin signaling. • E6AP and E6 act through different mechanisms to augment or stimulate Wnt signaling.

  14. Audit Report: AP-B-95-01 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AP-B-95-01 Audit Report: AP-B-95-01 November 1, 1994 Audit of Management and Control of Information Resources at Sandia National Laboratories Audit Report: AP-B-95-01 (1.97 MB) More Documents & Publications Audit Report: OAS-L-06-12 Final Notice of Violation, Sandia Corporation Audit Report: WR-B-97-07

  15. 2011 Annual Planning Summary for Office of Legacy Management (LM), Grand Junction (See LM APS)

    Broader source: Energy.gov [DOE]

    The ongoing and projected Environmental Assessments and Environmental Impact Statements for 2011 and 2012 within the Office of Legacy Management (LM), Grand Junction (See LM APS).

  16. In vitro removal of actinide (IV) ions

    DOE Patents [OSTI]

    Weitl, Frederick L.; Raymond, Kenneth N.

    1982-01-01

    A compound of the formula: ##STR1## wherein X is hydrogen or a conventional electron-withdrawing group, particularly --SO.sub.3 H or a salt thereof; n is 2, 3, or 4; m is 2, 3, or 4; and p is 2 or 3. The present compounds are useful as specific sequestering agents for actinide (IV) ions. Also described is a method for the 2,3-dihydroxybenzamidation of azaalkanes.

  17. ARM - Field Campaign - AIRS Validation Soundings Phase IV and...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Validation Soundings Phase IV and V-NSA ARM Data Discovery Browse Data Comments? ... Campaign : AIRS Validation Soundings Phase IV and V-NSA 2005.04.25 - 2006.04.24 Lead ...

  18. Radioactive air emissions notice of construction for installation and operation of a waste retrieval system and tanks 241-AP-102 and 241-AP-104 project

    SciTech Connect (OSTI)

    DEXTER, M.L.

    1999-11-15

    This document serves as a notice of construction (NOC) pursuant to the requirements of Washington Administrative Code (WAC) 246 247-060, and as a request for approval to modify pursuant to 40 Code of Federal Regulations (CFR) 61 07 for the installation and operation of one waste retrieval system in the 24 1 AP-102 Tank and one waste retrieval system in the 241 AP 104 Tank Pursuant to 40 CFR 61 09 (a)( 1) this application is also intended to provide anticipated initial start up notification Its is requested that EPA approval of this application will also constitute EPA acceptance of the initial start up notification Project W 211 Initial Tank Retrieval Systems (ITRS) is scoped to install a waste retrieval system in the following double-shell tanks 241-AP 102-AP 104 AN 102, AN 103, AN-104, AN 105, AY 102 AZ 102 and SY-102 between now and the year 2011. Because of the extended installation schedules and unknowns about specific activities/designs at each tank, it was decided to submit NOCs as that information became available This NOC covers the installation and operation of a waste retrieval system in tanks 241 AP-102 and 241 AP 104 Generally this includes removal of existing equipment installation of new equipment and construction of new ancillary equipment and buildings Tanks 241 AP 102 and 241 AP 104 will provide waste feed for immobilization into a low activity waste (LAW) product (i.e. glass logs) The total effective dose equivalent (TEDE) to the offsite maximally exposed individual (MEI) from the construction activities is 0 045 millirem per year The unabated TEDE to the offsite ME1 from operation of the mixer pumps is 0 042 millirem per year.

  19. Guanh es Energia S A | Open Energy Information

    Open Energy Info (EERE)

    Guanh es Energia S A Jump to: navigation, search Name: Guanhes Energia S.A. Place: Belo Horizonte, Minas Gerais, Brazil Zip: 30140-000 Sector: Hydro Product: Minas Gerais-SPV...

  20. Home Performance with Energy Star (HPwES) Program Report

    SciTech Connect (OSTI)

    none,

    2013-01-01

    This report summarizes the Department’s review of comments received on the HPwES v2 proposal and presents a multi-year action plan to both address Department goals and incorporate industry feedback.

  1. APS Alternative Fuel (Hydrogen) Pilot Plant - Monitoring System Report

    SciTech Connect (OSTI)

    James Francfort; Dimitri Hochard

    2005-07-01

    The U.S. Department of Energy’s (DOE’s) Advanced Vehicle Testing Activity (AVTA), along with Electric Transportation Applications and Arizona Pubic Service (APS), is monitoring the operations of the APS Alternative Fuel (Hydrogen) Pilot Plant to determine the costs to produce hydrogen fuels (including 100% hydrogen as well as hydrogen and compressed natural gas blends) for use by fleets and other operators of advanced-technology vehicles. The hydrogen fuel cost data will be used as benchmark data by technology modelers as well as research and development programs. The Pilot Plant can produce up to 18 kilograms (kg) of hydrogen per day by electrolysis. It can store up to 155 kg of hydrogen at various pressures up to 6,000 psi. The dispenser island can fuel vehicles with 100% hydrogen at 5,000 psi and with blends of hydrogen and compressed natural gas at 3,600 psi. The monitoring system was designed to track hydrogen delivery to each of the three storage areas and to monitor the use of electricity on all major equipment in the Pilot Plant, including the fuel dispenser island. In addition, water used for the electrolysis process is monitored to allow calculation of the total cost of plant operations and plant efficiencies. The monitoring system at the Pilot Plant will include about 100 sensors when complete (50 are installed to date), allowing for analysis of component, subsystems, and plant-level costs. The monitoring software is mostly off-the-shelve, with a custom interface. The majority of the sensors input to the Programmable Automation Controller as 4- to 20-mA analog signals. The plant can be monitored over of the Internet, but the control functions are restricted to the control room equipment. Using the APS general service plan E32 electric rate of 2.105 cents per kWh, during a recent eight-month period when 1,200 kg of hydrogen was produced and the plant capacity factor was 26%, the electricity cost to produce one kg of hydrogen was $3.43. However, the

  2. Final Technical Report: Electronic Structure Workshop (ES13)

    SciTech Connect (OSTI)

    Zhang, Shiwei

    2015-02-26

    The 25th Annual Workshop on Recent Developments in Electronic Structure Methods (ES2013) was successfully held at the College of William & Mary in Williamsburg VA on June 11-14, 2013. The workshop website is at http://es13.wm.edu/ , which contains updated information on the workshop and a permanent archive of the scientific contents. DOE's continued support has been instrumental to the success of the workshop.

  3. 2210R1 ES&H Staff Assignments

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    210 Appendix R1 Staff Assigned to ES&H Activities 1.0 Purpose This appendix provides information for current Environmental, Safety and Health (ES&H) related staff positions at Jefferson Lab. Other positions of responsibility are outlined on the various Division & Department's Organization Charts. * Section 2.0 - Contact Information for Hazard Issues * Section 3.0 - Contact Information for Responsible Positions * Section 4.0 - Councils and Committees * Section 5.0 - Division Safety

  4. Environmental & ES&H Liabilities | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Environmental & ES&H Liabilities Environmental & ES&H Liabilities The purpose of the Environmental Liabilities Guidance section is to share these materials with Department of Energy's (DOE) contractors and others that are outside the DOE firewalls and cannot access these materials through the DOE Intranet sites. This guidance is intended to provide policies, principles, and education regarding the environmental liability estimation and reporting process at DOE. Questions

  5. The History of the APS Shock Compression of Condensed Matter Topical Group

    SciTech Connect (OSTI)

    Forbes, J W

    2001-05-02

    In order to provide broader scientific recognition and to advance the science of shock compressed condensed matter, a group of American Physical Society (APS) members worked within the Society to make this field an active part of the APS. Individual papers were presented at APS meetings starting in the 1940's and shock wave sessions were organized starting with the 1967 Pasadena meeting. Shock wave topical conferences began in 1979 in Pullman, WA. Signatures were obtained on a petition in 1984 from a balanced cross-section of the shock wave community to form an APS Topical Group (TG). The APS Council officially accepted the formation of the Shock Compression of Condensed Matter (SCCM) TG at its October 1984 meeting. This action firmly aligned the shock wave field with a major physical science organization. Most early topical conferences were sanctioned by the APS while those held after 1992 were official APS meetings. The topical group organizes a shock wave topical conference in odd numbered years while participating in shock wave/high pressure sessions at APS general meetings in even numbered years.

  6. History of the APS Topical Group on Shock Compression of Condensed Matter

    SciTech Connect (OSTI)

    Forbes, J W

    2001-10-19

    In order to provide broader scientific recognition and to advance the science of shock compressed condensed matter, a group of American Physical Society (APS) members worked within the Society to make this field an active part of the APS. Individual papers were presented at APS meetings starting in the 1940's and shock wave sessions were organized starting with the 1967 Pasadena meeting. Shock wave topical conferences began in 1979 in Pullman, WA. Signatures were obtained on a petition in 1984 from a balanced cross-section of the shock wave community to form an APS Topical Group (TG). The APS Council officially accepted the formation of the Shock Compression of Condensed Matter (SCCM) TG at its October 1984 meeting. This action firmly aligned the shock wave field with a major physical science organization. Most early topical conferences were sanctioned by the APS while those held after 1992 were official APS meetings. The topical group organizes a shock wave topical conference in odd numbered years while participating in shock wavehigh pressure sessions at APS general meetings in even numbered years.

  7. SECTION IV. ATOMIC AND MOLECULAR SCIENCE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    IV. ATOMIC AND MOLECULAR SCIENCE Cross Sections for Cu K-Vacancy Production in Fast Heavy Ion Collisions R.L. Watson, J.M. Blackadar and V. Horvat Enhancement of the Cu Kα x-ray Diagram Lines in Fast Heavy Ion Collisions R.L. Watson, V. Horvat and J.M. Blackadar K-shell Ionization by Secondary Electrons V. Horvat, R.L. Watson and J.M. Blackadar Target-atom Inner-shell Vacancy Distributions Created in Collisions with Heavy Ion Projectiles V. Horvat, R.L. Watson and J.M. Blackadar Systematics of

  8. Gen IV Materials Handbook Functionalities and Operation

    SciTech Connect (OSTI)

    Ren, Weiju

    2009-12-01

    This document is prepared for navigation and operation of the Gen IV Materials Handbook, with architecture description and new user access initiation instructions. Development rationale and history of the Handbook is summarized. The major development aspects, architecture, and design principles of the Handbook are briefly introduced to provide an overview of its past evolution and future prospects. Detailed instructions are given with examples for navigating the constructed Handbook components and using the main functionalities. Procedures are provided in a step-by-step fashion for Data Upload Managers to upload reports and data files, as well as for new users to initiate Handbook access.

  9. Table IV: Technical Targets for Membranes: Stationary

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    IV: Technical Targets for Membranes: Stationary All targets must be achieved simultaneously Characteristics Units Calendar year 2002 status a 2005 2010 Membrane conductivity, operating temperature Ω-cm 2 0.1 0.1 0.1 Oxygen cross-over b mA/cm 2 5 5 2 Hydrogen cross-over b mA/cm 2 5 5 2 Cost $/kW 50 5 Operating Temperature o C 160 160 170 Durability Hours 5000 >15000 >40000 Survivability o C -20 -30 -40 Notes: a) Status is present day 80 o C unless otherwise noted; targets are for new

  10. New Materials for NGNP/Gen IV

    SciTech Connect (OSTI)

    Robert W. Swindeman; Douglas L. Marriott

    2009-12-18

    The bounding conditions were briefly summarized for the Next Generation Nuclear Plant (NGNP) that is the leading candidate in the Department of Energy Generation IV reactor program. Metallic materials essential to the successful development and proof of concept for the NGNP were identified. The literature bearing on the materials technology for high-temperature gas-cooled reactors was reviewed with emphasis on the needs identified for the NGNP. Several materials were identified for a more thorough study of their databases and behavioral features relative to the requirements ASME Boiler and Pressure Vessel Code, Section III, Division 1, Subsection NH.

  11. Part IV Council on Environmental Quality

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    79 Wednesday, No. 247 December 24, 2014 Part IV Council on Environmental Quality Revised Draft Guidance for Federal Departments and Agencies on Consideration of Greenhouse Gas Emissions and the Effects of Climate Change in NEPA Reviews; Notice VerDate Sep<11>2014 18:20 Dec 23, 2014 Jkt 235001 PO 00000 Frm 00001 Fmt 4717 Sfmt 4717 E:\FR\FM\24DEN2.SGM 24DEN2 mstockstill on DSK4VPTVN1PROD with NOTICES2 77802 Federal Register / Vol. 79, No. 247 / Wednesday, December 24, 2014 / Notices 1 A

  12. Tandem Differential Mobility Analyzer/Aerodynamic Particle Sizer (APS) Handbook

    SciTech Connect (OSTI)

    Collins, D

    2010-06-18

    The tandem differential mobility analyzer (TDMA) is a single instrument that cycles through a series of complementary measurements of the physical properties of size-resolved submicron particles. In 2008, the TDMA was augmented through the addition of an aerodynamic particle sizer (APS), which extends the upper limit of the measured size distribution into the supermicron range. These two instruments are operated in parallel, but because they are controlled by a common computer and because the size distributions measured by the two are integrated in the produced datastreams, they are described together here. Throughout the day, the TDMA sequentially measures submicron aerosol size distributions and size-resolved hygroscopic growth distributions. More specifically, the instrument is operated as a scanning DMA to measure size distributions and as a TDMA to measure size-resolved hygroscopicity. A typical measurement sequence requires roughly 45 minutes. Each morning additional measurements are made of the relative humidity (RH) dependent hygroscopicity and temperature-dependent volatility of size-resolved particles. When the outside temperature and RH are within acceptable ranges, the hydration state of size-resolved particles is also characterized. The measured aerosol distributions complement the array of aerosol instruments in the Aerosol Observing System (AOS) and provide additional details of the light-scattering and cloud-nucleating characteristics of the aerosol.

  13. Description of the OSU APEX test facility to assess AP600 passive safety

    SciTech Connect (OSTI)

    Hochreiter, L.E.; Lau, L.K.; Reyes, J.N. Jr.; Groome, J.T.

    1995-12-31

    The objective of this paper is to describe the Advanced Plant Experiment (APEX) test facility, which is a new integral system test facility located at Oregon State University (OSU) specifically scaled, designed, and built to simulate all of the important geometrical details of the Westinghouse AP600. The APEX facility has been designed and constructed to develop a database that can be used to validate the thermal hydraulic safety analysis codes that will be used in the AP600 design certification process. The test facility has been specifically designed and scaled to model small break loss-of-coolant and long-term cooling transients, which utilize the AP600 passive safety systems.

  14. 241-AP Tank Farm Construction Extent of Condition Review for Tank Integrity

    SciTech Connect (OSTI)

    Barnes, Travis J.; Gunter, Jason R.; Reeploeg, Gretchen E.

    2014-04-04

    This report provides the results of an extent of condition construction history review for the 241-AP tank farm. The construction history of the 241-AP tank farm has been reviewed to identify issues similar to those experienced during tank AY-102 construction. Those issues and others impacting integrity are discussed based on information found in available construction records, using tank AY-102 as the comparison benchmark. In the 241-AP tank farm, the sixth double-shell tank farm constructed, tank bottom flatness, refractory material quality, post-weld stress relieving, and primary tank bottom weld rejection were improved.

  15. Onboard Type IV Compressed Hydrogen Storage System Cost Analysis Webinar |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Onboard Type IV Compressed Hydrogen Storage System Cost Analysis Webinar Onboard Type IV Compressed Hydrogen Storage System Cost Analysis Webinar Access the recording and download the presentation slides from the Fuel Cell Technologies Office webinar "Update to the 700 bar Compressed Hydrogen Storage System Cost Projection" held on February 25, 2016. Onboard Type IV Compressed Hydrogen Storage System Cost Analysis Webinar Slides (2.59 MB) More Documents &

  16. Hotline IV …High Temperature ESP | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hotline IV …High Temperature ESP Hotline IV …High Temperature ESP Project Objective: Increase temperature rating of high temperature ESPs. high_dhruva_hotline_iv.pdf (1.64 MB) More Documents & Publications Creation of an Engineered Geothermal System through Hydraulic and Thermal Stimulation Novel Energy Conversion Equipment for Low Temperature Geothermal Resources High-Temperature Motor Windings for Downhole Pumps Used in Geothermal Energy Production

  17. Separation of thorium (IV) from lanthanide concentrate (LC) and...

    Office of Scientific and Technical Information (OSTI)

    (LC) and water leach purification (WLP) residue Citation Details In-Document Search Title: Separation of thorium (IV) from lanthanide concentrate (LC) and water leach ...

  18. Solar Energy Education. Reader, Part IV. Sun schooling Not Available...

    Office of Scientific and Technical Information (OSTI)

    Reader, Part IV. Sun schooling Not Available 14 SOLAR ENERGY; SOLAR ENERGY; EDUCATION; BIOMASS; CURRICULUM GUIDES; GREENHOUSE EFFECT; METHANE; OCEAN THERMAL POWER PLANTS; RENEWABLE...

  19. Generation IV International Forum Signs Agreement to Collaborate...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Forum Signs Agreement to Collaborate on Sodium Cooled Fast Reactors Generation IV International Forum Signs Agreement to Collaborate on Sodium Cooled Fast Reactors February 17, ...

  20. Onboard Type IV Compressed Hydrogen Storage System Cost Analysis...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Onboard Type IV Compressed Hydrogen Storage System Cost Analysis U.S. Department of Energy Fuel Cell Technologies Office February 25, 2016 Presenter: Brian James - Strategic ...

  1. A Flexible Approach to Big Data at the APS | Argonne National...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A Flexible Approach to Big Data at the APS November 23, 2015 11:00AM to 12:00PM Presenter Ray Osborn (MSD), Senior Physicist Location Building 401, Room A1100 Type Seminar Series...

  2. Advanced Photon Source (APS) | U.S. DOE Office of Science (SC...

    Office of Science (SC) Website

    II (NSLS-II) Stanford Synchrotron Radiation Light Source (SSRL) Neutron Scattering ... The APS is one of only four third-generation, hard x-ray synchrotron radiation light ...

  3. Expression, purification, crystallization and structure of human adipocyte lipid-binding protein (aP2)

    SciTech Connect (OSTI)

    Marr, Eric; Tardie, Mark; Carty, Maynard; Brown Phillips, Tracy; Wang, Ing-Kae; Soeller, Walt; Qiu, Xiayang Karam, George

    2006-11-01

    The crystal structure of human adipocyte lipid-binding protein (aP2) with a bound palmitate is reported at 1.5 resolution. Human adipocyte lipid-binding protein (aP2) belongs to a family of intracellular lipid-binding proteins involved in the transport and storage of lipids. Here, the crystal structure of human aP2 with a bound palmitate is described at 1.5 resolution. Unlike the known crystal structure of murine aP2 in complex with palmitate, this structure shows that the fatty acid is in a folded conformation and that the loop containing Phe57 acts as a lid to regulate ligand binding by excluding solvent exposure to the central binding cavity.

  4. Audit Report: AP-FS-97-02 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    FS-97-02 Audit Report: AP-FS-97-02 June 6, 1997 Audit of Departmental Integrated Standardized Core Accounting System (DISCAS) Operations at Selected Field Sites Audit Report: ...

  5. Comparative Study of Station Blackout Counterpart Tests in APEX and ROSA/AP600

    SciTech Connect (OSTI)

    Lafi, Abd Y.; Reyes, Jose N. Jr.

    2000-05-15

    A comparison is presented between station blackout tests conducted in both the Advanced Plant Experiment (APEX) facility and in the modified Rig of Safety Assessment (ROSA/AP600) Large-Scale Test Facility. The comparison includes the depressurization and liquid-level behavior during secondary-side blowdown, natural circulation, automatic depressurization system operation, and in-containment refueling water storage tank injection. Reasonable agreement between the test results from APEX NRC-2 and ROSA/AP600 AP-BO-01 has been observed with respect to the timing of depressurization and liquid draining rates. This indicates that the reduced height and pressure scaling of APEX preserves the sequence of events relative to the full-height and pressure ROSA/AP600.

  6. Microsoft PowerPoint - APS07_poster_AdvScen.ppt

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and the Alcator C-Mod team. MIT Plasma Science and Fusion Center *Princeton Plasma Physics Laboratory Poster NP8:66 49 th Annual Meeting of APS-DPP Orlando, Florida November...

  7. http://www.epa.gov/ttn/chief/ap42/index.html

    National Nuclear Security Administration (NNSA)

    This is current through the Fifth Edition, Supplement C of AP 42. For sections and chapters added after November 1997, see the chapter web pages below. Introduction Introduction to ...

  8. Analysis of N-16 concentration in primary cooling system of AP1000...

    Office of Scientific and Technical Information (OSTI)

    Analysis of N-16 concentration in primary cooling system of AP1000 power reactor Citation Details In-Document Search Title: Analysis of N-16 concentration in primary cooling system ...

  9. Audit Report: AP-B-95-02 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    B-95-02 Audit Report: AP-B-95-02 July 31, 1995 Audit of Selected Aspects of the Unclassified Computer Security Program at a DOE Headquarters Computing Facility Audit Report: AP-B-95-02 (77.9 KB) More Documents & Publications Evaluation Report on The Department's Unclassified Cyber Security Program 2002, DOE/IG-0567 Audit Report: IG-0818 Excessing of Computers Used for Unclassified Controlled Information at the Idaho National Lab

  10. AP1000 Design Basis Event Simulation at the APEX-1000 Test Facility

    SciTech Connect (OSTI)

    Wright, Richard F.; Groome, John

    2004-07-01

    The AP1000 is a 1000 MWe advanced nuclear power plant that uses passive safety features to enhance plant safety and to provide significant and measurable improvements in plant simplification, reliability, investment protection and plant costs. The AP1000 relies heavily on the 600 MWe AP600 which received design certification in 1999. A critical part of the AP600 design certification process involved the testing of the passive safety systems. A one-fourth height, one-fourth pressure test facility, APEX-600, was constructed at the Oregon State University to study design basis events, and to provide a body of data to be used to validate the computer models used to analyze the AP600. This facility was extensively modified to reflect the design changes for AP1000 including higher power in the electrically heated rods representing the reactor core, and changes in the size of the pressurizer, core makeup tanks and automatic depressurization system. Several design basis events are being simulated at APEX-1000 including a double-ended direct vessel injection (DEDVI) line break and a 2-inch cold leg break. These tests show that the core remains covered with ample margin until gravity injection is established regardless of the initiating event. The tests also show that liquid entrainment from the upper plenum which is proportional to the reactor power does not impact the ability of the passive core cooling system to keep the core covered. (authors)

  11. New mono-organotin (IV) dithiocarbamate complexes

    SciTech Connect (OSTI)

    Muthalib, Amirah Faizah Abdul; Baba, Ibrahim

    2014-09-03

    Eighteen new mono-organotin dithiocarbamate compounds derived each nine from methyltin(IV) and phenyltin(IV) reacted using in-situ method with various type of N-dialkylamine together with carbon disulphide with the ratio of 1:3:3. Elemental and gravimetric analysis showed that the general formula of these compounds were RSnCl[S{sub 2}CNR′R″]{sub 2} (R= Ph, CH{sub 3}, R′ = CH{sub 3}, C{sub 2}H{sub 5}, C{sub 7}H{sub 7} and R″ = C{sub 2}H{sub 5}, C{sub 6}H{sub 11}, iC{sub 3}H{sub 7}, C{sub 7}H{sub 7}). These compounds had been characterized by infrared spectroscopy, ultraviolet spectroscopy, {sup 1}H, {sup 13}C NMR spectroscopy and single crystal X-ray crystallography. The infrared spectra of these compounds showed three important peaks indicating the formation of dithiocarbamate compounds, ν(CN), ν(CS) and ν(Sn-S) band which present in the region of 1444–1519, 954–1098 and 318–349 cm{sup −1} respectively. The ultraviolet-visible spectra showed an absorption band for the π - π* transition of NCS group in the range of 253 – 259 nm due to the intramolecular charge transfer of the ligand. The {sup 13}C NMR spectra showed an important shift for δ(N{sup 13}CS{sub 2}) in the range of 196.8 – 201.9 ppm.. Single crystal X-ray diffraction studies showed three new structures with the general formula of PhSnCl[S{sub 2}CN(Et)(i−Pr)]{sub 2}, MeSnCl[S{sub 2}CN(Me)(Cy)]{sub 2} and MeSnCl[S{sub 2}CN(i−Pr)(CH{sub 2}Ph)]{sub 2}. All structures having a distorted octahedral geometry set by CClS{sub 4} donor atom from the two chelating dithiocarbamate ligands.

  12. CALIBRATING C-IV-BASED BLACK HOLE MASS ESTIMATORS

    SciTech Connect (OSTI)

    Park, Daeseong; Woo, Jong-Hak; Shin, Jaejin [Astronomy Program, Department of Physics and Astronomy, Seoul National University, Seoul 151-742 (Korea, Republic of); Denney, Kelly D., E-mail: pds2001@astro.snu.ac.kr, E-mail: woo@astro.snu.ac.kr, E-mail: jjshin@astro.snu.ac.kr, E-mail: kelly@dark-cosmology.dk [Dark Cosmology Centre, Niels Bohr Institute, Juliane Maries Vej 30, DK-2100 Copenhagen O (Denmark)

    2013-06-20

    We present the single-epoch black hole mass estimators based on the C IV {lambda}1549 broad emission line, using the updated sample of the reverberation-mapped active galactic nuclei and high-quality UV spectra. By performing multi-component spectral fitting analysis, we measure the C IV line widths (FWHM{sub C{sub IV}} and line dispersion, {sigma}{sub C{sub IV}}) and the continuum luminosity at 1350 A (L{sub 1350}) to calibrate the C-IV-based mass estimators. By comparing with the H{beta} reverberation-based masses, we provide new mass estimators with the best-fit relationships, i.e., M{sub BH}{proportional_to}L{sub 1350}{sup 0.50{+-}0.07}{sigma}{sub C{sub IV}{sup 2}} and M{sub BH}{proportional_to}L{sub 1350}{sup 0.52{+-}0.09} FWHM{sub C{sub IV}{sup 0.56{+-}0.48}}. The new C-IV-based mass estimators show significant mass-dependent systematic difference compared to the estimators commonly used in the literature. Using the published Sloan Digital Sky Survey QSO catalog, we show that the black hole mass of high-redshift QSOs decreases on average by {approx}0.25 dex if our recipe is adopted.

  13. Reducing Nitrogen Oxide Emissions: 1996 Compliance with Title IV Limits

    Reports and Publications (EIA)

    1998-01-01

    The purpose of this article is to summarize the existing federal nitrogen oxide (Nox) regulations and the 1996 performance of the 239 Title IV generating units. It also reviews the basics of low-Nox burner technology and presents cost and performance data for retrofits at Title IV units.

  14. An Integrated Safety Assessment Methodology for Generation IV Nuclear Systems

    SciTech Connect (OSTI)

    Timothy J. Leahy

    2010-06-01

    The Generation IV International Forum (GIF) Risk and Safety Working Group (RSWG) was created to develop an effective approach for the safety of Generation IV advanced nuclear energy systems. Early work of the RSWG focused on defining a safety philosophy founded on lessons learned from current and prior generations of nuclear technologies, and on identifying technology characteristics that may help achieve Generation IV safety goals. More recent RSWG work has focused on the definition of an integrated safety assessment methodology for evaluating the safety of Generation IV systems. The methodology, tentatively called ISAM, is an integrated toolkit consisting of analytical techniques that are available and matched to appropriate stages of Generation IV system concept development. The integrated methodology is intended to yield safety-related insights that help actively drive the evolving design throughout the technology development cycle, potentially resulting in enhanced safety, reduced costs, and shortened development time.

  15. Actinide Corroles: Synthesis and Characterization of Thorium(IV) and Uranium(IV) bis(-chloride) Dimers

    SciTech Connect (OSTI)

    Ward, Ashleigh L.; Buckley, Heather L.; Gryko, Daniel T.; Lukens, Wayne W.; Arnold, John

    2013-12-01

    The first synthesis and structural characterization of actinide corroles is presented. Thorium(IV) and uranium(IV) macrocycles of Mes2(p-OMePh)corrole were synthesised and characterized by single-crystal X-ray diffraction, UV-Visible spectroscopy, variable-temperature 1H NMR, ESI mass spectrometry and cyclic voltammetry.

  16. Solar Energy Grid Integration Systems -- Energy Storage (SEGIS-ES).

    SciTech Connect (OSTI)

    Hanley, Charles J.; Ton, Dan T.; Boyes, John D.; Peek, Georgianne Huff

    2008-07-01

    This paper describes the concept for augmenting the SEGIS Program (an industry-led effort to greatly enhance the utility of distributed PV systems) with energy storage in residential and small commercial applications (SEGIS-ES). The goal of SEGIS-ES is to develop electrical energy storage components and systems specifically designed and optimized for grid-tied PV applications. This report describes the scope of the proposed SEGIS-ES Program and why it will be necessary to integrate energy storage with PV systems as PV-generated energy becomes more prevalent on the nation's utility grid. It also discusses the applications for which energy storage is most suited and for which it will provide the greatest economic and operational benefits to customers and utilities. Included is a detailed summary of the various storage technologies available, comparisons of their relative costs and development status, and a summary of key R&D needs for PV-storage systems. The report concludes with highlights of areas where further PV-specific R&D is needed and offers recommendations about how to proceed with their development.

  17. APOSTLE: 11 TRANSIT OBSERVATIONS OF TrES-3b

    SciTech Connect (OSTI)

    Kundurthy, P.; Becker, A. C.; Agol, E.; Barnes, R.; Williams, B.

    2013-02-10

    The Apache Point Survey of Transit Lightcurves of Exoplanets (APOSTLE) observed 11 transits of TrES-3b over two years in order to constrain system parameters and look for transit timing and depth variations. We describe an updated analysis protocol for APOSTLE data, including the reduction pipeline, transit model, and Markov Chain Monte Carlo analyzer. Our estimates of the system parameters for TrES-3b are consistent with previous estimates to within the 2{sigma} confidence level. We improved the errors (by 10%-30%) on system parameters such as the orbital inclination (i {sub orb}), impact parameter (b), and stellar density ({rho}{sub *}) compared to previous measurements. The near-grazing nature of the system, and incomplete sampling of some transits, limited our ability to place reliable uncertainties on individual transit depths and hence we do not report strong evidence for variability. Our analysis of the transit timing data shows no evidence for transit timing variations and our timing measurements are able to rule out super-Earth and gas giant companions in low-order mean motion resonance with TrES-3b.

  18. Neptunium (IV) oxalate solubility. [22, 45, 60/sup 0/C

    SciTech Connect (OSTI)

    Luerkens, D W

    1983-07-01

    The equilibrium solubility of neptunium (IV) oxalate in nitric/oxalic acid solutions was determined at 22/sup 0/C, 45/sup 0/C, and 60/sup 0/C. The concentrations of nitric/oxalic acid solutions represented a wide range of free oxalate ion concentration. A mathematical solubility model was developed which is based on the formation of the known complexes of neptunium (IV) oxalate. the solubility model uses a simplified concentration parameter which is proportional to the free oxalate ion concentration. The solubility model can be used to estimate the equilibrium solubility of neptunium (IV) oxalate over a wide range of oxalic and nitric acid concentrations at each temperature.

  19. Report on the value engineering workshop on APS beamline front ends

    SciTech Connect (OSTI)

    Kuzay, T.

    1993-01-01

    A formal value engineering evaluation process was developed to address the front end components of the beamlines for the Advanced Photon Source (APS). This process (described in Section 2) involved an information phase, a creative phase, a judgment phase, a development phase, and a recommendation phase. Technical experts from other national laboratories and industry were invited to a two-day Value Engineering Workshop on November 5-6, 1992. The results of this Workshop are described in Section 4. Following the Workshop, various actions by the APS staff led to the redesign of the front end components, which are presented in Sections 5 and 6. The cost benefit analysis is presented in Section 7. It is important of realize that an added benefit of the Workshop was to obtain numerous design evaluations and enhancements of the front end components by experts in the field. As the design work proceeds to Title II completion, the APS staff is including many of these suggestions.

  20. DOE/ES-0002 K C E I V E

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    f4|K' DOE/ES-0002 K C E I V E 3 B y umiMm Energy Chronology from World War II to the Present Mhsm August 1982 DO'NOT MICROFILM COVER U.S. Department of Energy Assistant Secretary, Management and Administration Office of The Executive Secretary DISTRIBUTION QE THIS DOCUMENT IS UNLIMITED DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency Thereof, nor any of their employees, makes any

  1. The Sloan Digital Sky Survey Quasar Lens Search. IV. Statistical...

    Office of Scientific and Technical Information (OSTI)

    The Sloan Digital Sky Survey Quasar Lens Search. IV. Statistical Lens Sample from the Fifth Data Release Citation Details In-Document Search Title: The Sloan Digital Sky Survey...

  2. TOTAL SES SL EJ//EK EN IV EN III

    National Nuclear Security Administration (NNSA)

    SL EJEK EN IV EN III NN (Engineering) NQ (ProfTechAdmin) NU (TechAdminSupport) RETIREMENT ELIGIBLE TO RETIRE IMMEDIATELY 11 13.9% ELIGIBLE TO RETIRE BY 3272014 29 36.7%...

  3. 2016 Annex IV State of the Science Webinar

    Broader source: Energy.gov [DOE]

    The recently published Annex IV State of the Science Report summarizes the state of the science of interactions and effects of marine renewable energy (MRE) devices on the marine environment, the...

  4. ARM - Field Campaign - Aerosol Life Cycle: UV-APS and Nano-SMPS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    govCampaignsAerosol Life Cycle: UV-APS and Nano-SMPS ARM Data Discovery Browse Data Related Campaigns Aerosol Life Cycle IOP at BNL 2011.06.01, Sedlacek, OSC Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Campaign : Aerosol Life Cycle: UV-APS and Nano-SMPS 2011.06.10 - 2011.06.25 Lead Scientist : Gannet Hallar For data sets, see below. Abstract Current estimates indicate that new particle formation globally account for a majority of Cloud

  5. AP and L sees window of opportunity to double revenue via cogeneration

    SciTech Connect (OSTI)

    Not Available

    1982-02-01

    The sale of cogenerated process steam to industries could allow Arkansas Power and Light to expand its operation from power generation to manufactured energy at double the revenue. Rising oil prices and pending gas deregulation are forcing industrial customers to look for alternative fuel supplies. Utilities must seize the opportunity to sell cogenerated steam before prospective customers decide to generate their own power and steam, although a user survey shows that industry is reluctant to commit the capital at this time. AP and L's system will join combined-cycle cogeneration and coal gasification. Four figures display the data developed during AP and L's continuing feasibility studies. (DCK)

  6. Table IV: Technical Targets for Membranes: Stationary | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy IV: Technical Targets for Membranes: Stationary Table IV: Technical Targets for Membranes: Stationary "Technical targets for fuel cell membranes in stationary applications defined by the High Temperature Working Group (February 2003). " technical_targets_membr_stat.pdf (83.24 KB) More Documents & Publications Table II: Technical Targets for Membranes: Automotive Table III: Technical Targets for Catalyst Coated Membranes (CCMs): Stationary Table I: Technical Targets for

  7. Two-stage precipitation of neptunium (IV) oxalate

    SciTech Connect (OSTI)

    Luerkens, D. W.

    1983-07-01

    Neptunium (IV) oxalate was precipitated using a two-stage precipitation system. A series of precipitation experiments was used to identify the significant process variables affecting precipitate characteristics. Process variables tested were input concentrations, solubility conditions in the first stage precipitator, precipitation temperatures, and residence time in the first stage precipitator. A procedure has been demonstrated that produces neptunium (IV) oxalate particles that filter well and readily calcine to the oxide.

  8. Onboard Type IV Compressed Hydrogen Storage System Cost Analysis Webinar

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Onboard Type IV Compressed Hydrogen Storage System Cost Analysis U.S. Department of Energy Fuel Cell Technologies Office February 25, 2016 Presenter: Brian James - Strategic Analysis, Inc. DOE Host: Grace Ordaz- Technology Manager, Hydrogen Storage Program 2 | Fuel Cell Technologies Office eere.energy.gov Question and Answer * Please type your questions into the question box 2 Onboard Type IV Compressed Hydrogen Storage System Cost Analysis Funded by the U.S. Department of Energy's Fuel Cell

  9. Displacement damage effects on CMOS APS image sensors induced by neutron irradiation from a nuclear reactor

    SciTech Connect (OSTI)

    Wang, Zujun Huang, Shaoyan; Liu, Minbo; Xiao, Zhigang; He, Baoping; Yao, Zhibin; Sheng, Jiangkun

    2014-07-15

    The experiments of displacement damage effects on CMOS APS image sensors induced by neutron irradiation from a nuclear reactor are presented. The CMOS APS image sensors are manufactured in the standard 0.35 ?m CMOS technology. The flux of neutron beams was about 1.33 10{sup 8} n/cm{sup 2}s. The three samples were exposed by 1 MeV neutron equivalent-fluence of 1 10{sup 11}, 5 10{sup 11}, and 1 10{sup 12} n/cm{sup 2}, respectively. The mean dark signal (K{sub D}), dark signal spike, dark signal non-uniformity (DSNU), noise (V{sub N}), saturation output signal voltage (V{sub S}), and dynamic range (DR) versus neutron fluence are investigated. The degradation mechanisms of CMOS APS image sensors are analyzed. The mean dark signal increase due to neutron displacement damage appears to be proportional to displacement damage dose. The dark images from CMOS APS image sensors irradiated by neutrons are presented to investigate the generation of dark signal spike.

  10. Supporting document for the historical tank content estimate for AP-tank farm

    SciTech Connect (OSTI)

    Brevick, C.H.; Stroup, J.L.; Funk, J.W., Fluor Daniel Hanford

    1997-03-06

    This Supporting Document provides historical in-depth characterization information on AP-Tank Farm, such as historical waste transfer and level data, tank physical information, temperature plots, liquid observation well plots, chemical analyte and radionuclide inventories for the Historical Tank Content Estimate Report for the Southeast Quadrant of the Hanford 200 Areas.

  11. Survey and alignment report on the primary control network for the APS

    SciTech Connect (OSTI)

    Friedsam, H.; Penicka, M.; Zhao, S.

    1993-02-01

    During November 1992 the survey and alignment team measured the entire primary control network for the APS. This task had to be finished before the enclosure of the EAA and the RF buildings were put in place, inhibiting several lines of sight necessary for the determination of the monument locations.

  12. AP1000{sup R} severe accident features and post-Fukushima considerations

    SciTech Connect (OSTI)

    Scobel, J. H.; Schulz, T. L.; Williams, M. G.

    2012-07-01

    The AP1000{sup R} passive nuclear power plant is uniquely equipped to withstand an extended station blackout scenario such as the events following the earthquake and tsunami at Fukushima without compromising core and containment integrity. The AP1000 plant shuts down the reactor, cools the core, containment and spent fuel pool for more than 3 days using passive systems that do not require AC or DC power or operator actions. Following this passive coping period, minimal operator actions are needed to extend the operation of the passive features to 7 days using installed equipment. To provide defense-in-depth for design extension conditions, the AP1000 plant has engineered features that mitigate the effects of core damage. Engineered features retain damaged core debris within the reactor vessel as a key feature. Other aspects of the design protect containment integrity during severe accidents, including unique features of the AP1000 design relative to passive containment cooling with water and air, and hydrogen management. (authors)

  13. EVALUATION OF THE TEMPORARY TENT COVER TRUSS SYSTEM AP PRIMARY VENT SYSTEM

    SciTech Connect (OSTI)

    HAQ MA

    2009-12-31

    The purpose of this calculation is to evaluate a temporary ten cover truss system. This system will be used to provide weather protection to the workers during replacement of the filter for the Primary Ventilation System in AP Tank Farm. The truss system has been fabricated utilizing tubes and couplers, which are normally used for scaffoldings.

  14. Protocol, ES&H Systems Assessor/Appraiser - October 2003 | Department...

    Broader source: Energy.gov (indexed) [DOE]

    Office Specific Qualification Standard for ES&H Systems AssessorAppraiser (Rev. 0) This ... PDF icon Protocol, ES&H Systems AssessorAppraiser - October 2003 More Documents & ...

  15. AP1000{sup R} nuclear power plant safety overview for spent fuel cooling

    SciTech Connect (OSTI)

    Gorgemans, J.; Mulhollem, L.; Glavin, J.; Pfister, A.; Conway, L.; Schulz, T.; Oriani, L.; Cummins, E.; Winters, J. [Westinghouse Electric Company LLC, 1000 Westinghouse Drive, Cranberry Township, PA 16066 (United States)

    2012-07-01

    The AP1000{sup R} plant is an 1100-MWe class pressurized water reactor with passive safety features and extensive plant simplifications that enhance construction, operation, maintenance, safety and costs. The AP1000 design uses passive features to mitigate design basis accidents. The passive safety systems are designed to function without safety-grade support systems such as AC power, component cooling water, service water or HVAC. Furthermore, these passive features 'fail safe' during a non-LOCA event such that DC power and instrumentation are not required. The AP1000 also has simple, active, defense-in-depth systems to support normal plant operations. These active systems provide the first level of defense against more probable events and they provide investment protection, reduce the demands on the passive features and support the probabilistic risk assessment. The AP1000 passive safety approach allows the plant to achieve and maintain safe shutdown in case of an accident for 72 hours without operator action, meeting the expectations provided in the U.S. Utility Requirement Document and the European Utility Requirements for passive plants. Limited operator actions are required to maintain safe conditions in the spent fuel pool via passive means. In line with the AP1000 approach to safety described above, the AP1000 plant design features multiple, diverse lines of defense to ensure spent fuel cooling can be maintained for design-basis events and beyond design-basis accidents. During normal and abnormal conditions, defense-in-depth and other systems provide highly reliable spent fuel pool cooling. They rely on off-site AC power or the on-site standby diesel generators. For unlikely design basis events with an extended loss of AC power (i.e., station blackout) or loss of heat sink or both, spent fuel cooling can still be provided indefinitely: - Passive systems, requiring minimal or no operator actions, are sufficient for at least 72 hours under all possible pool

  16. Electricity Subsector Cybersecurity Capability Maturity Model (ES-C2M2) |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Electricity Subsector Cybersecurity Capability Maturity Model (ES-C2M2) Electricity Subsector Cybersecurity Capability Maturity Model (ES-C2M2) Electricity Subsector Cybersecurity Capability Maturity Model (ES-C2M2) The Electricity Subsector Cybersecurity Capability Maturity Model (ES-C2M2) was established as a result of the Administration's efforts to improve electricity subsector cybersecurity capabilities, and to understand the cybersecurity posture of the energy

  17. ES&H development activities for the W89 warhead

    SciTech Connect (OSTI)

    Pretzel, C.W.

    1995-08-01

    Environmental, Safety and Health (ES&H) issues became an important design consideration during the development of the W89 warhead for the SRAM 11 (Short-Range Attack Missile) missile. An action plan was developed to handle these issues at all the production agencies and at both the system and the component level. The main thrust was in the area of solvent substitution, in particular for solder flux removal. The cleaner d-limonene followed by an isopropyl alcohol rinse was selected for applications were the traditional cleaners were 1,1,1 trichloroethane or trichloroethylene. Compatibility testing rather than efficacy testing dominated the development effort. In addition to other solvent substitution applications, organic materials that were free of toluene diisocynate (TDI), and methylene dianiline (MDA) were explored for use in the W89.

  18. Automatic generation and analysis of solar cell IV curves

    DOE Patents [OSTI]

    Kraft, Steven M.; Jones, Jason C.

    2014-06-03

    A photovoltaic system includes multiple strings of solar panels and a device presenting a DC load to the strings of solar panels. Output currents of the strings of solar panels may be sensed and provided to a computer that generates current-voltage (IV) curves of the strings of solar panels. Output voltages of the string of solar panels may be sensed at the string or at the device presenting the DC load. The DC load may be varied. Output currents of the strings of solar panels responsive to the variation of the DC load are sensed to generate IV curves of the strings of solar panels. IV curves may be compared and analyzed to evaluate performance of and detect problems with a string of solar panels.

  19. Tethys and Annex IV Progress Report for FY 2012

    SciTech Connect (OSTI)

    Hanna, Luke A.; Butner, R. Scott; Whiting, Jonathan M.; Copping, Andrea E.

    2013-09-01

    The marine and hydrokinetic (MHK) environmental Impacts Knowledge Management System, dubbed “Tethys” after the mythical Greek titaness of the seas, is being developed by the Pacific Northwest National Laboratory (PNNL) to support the U.S. Department of Energy’s Wind and Water Power Program (WWPP). Functioning as a smart database, Tethys enables its users to identify key words or terms to help gather, organize and make available information and data pertaining to the environmental effects of MHK and offshore wind (OSW) energy development. By providing and categorizing relevant publications within a simple and searchable database, Tethys acts as a dissemination channel for information and data which can be utilized by regulators, project developers and researchers to minimize the environmental risks associated with offshore renewable energy developments and attempt to streamline the permitting process. Tethys also houses a separate content-related Annex IV data base with identical functionality to the Tethys knowledge base. Annex IV is a collaborative project among member nations of the International Energy Agency (IEA) Ocean Energy Systems – Implementing Agreement (OES-IA) that examines the environmental effects of ocean energy devices and projects. The U.S. Department of Energy leads the Annex IV working with federal partners such as the Federal Energy Regulatory Commission (FERC), the Bureau of Ocean Energy Management (BOEM), and the National Oceanic Atmospheric Administration (NOAA). While the Annex IV database contains technical reports and journal articles, it is primarily focused on the collection of project site and research study metadata forms (completed by MHK researchers and developers around the world, and collected by PNNL) which provide information on environmental studies and the current progress of the various international MHK developments in the Annex IV member nations. The purpose of this report is to provide a summary of the content

  20. The AP1000{sup R} China projects move forward to construction completion and equipment installation

    SciTech Connect (OSTI)

    Harrop, G.

    2012-07-01

    The AP1000 design is the only Generation III+ technology to receive design certification from the U.S. Nuclear Regulatory Commission. This evolutionary design provides the highest safety and performance standards and has several distinct advantages over other designs, including improved operations and reduced construction schedule risks through the use of modern, modular, engineering principles that allow construction and fabrication tasks traditionally performed in sequence to be undertaken in parallel. Since the first granting of Design Certification in 2005 by the NRC, the AP1000 design has been modified to meet emergent NRC requirements such as those requiring the design to withstand the impact of an aircraft crash. Both domestic and foreign utilities have turned to the Westinghouse AP1000 plant design to meet their near - and long-term sustainable energy needs. The first ever deployment of this advanced U.S. nuclear power technology began in China in 2007 with the award of a contract to build four AP1000 units, constructed in pairs at the coastal sites of Sanmen (Zhejiang Province) and Haiyang (Shandong Province). Currently, all four units are at an advanced stage of construction. The commercial operation date for Sanmen Unit 1 is November 2013 followed by Haiyang Unit 1 being operational in May 2014. Construction and equipment manufacture is at an advanced stage. Sanmen Unit 1 equipment that has been delivered includes the reactor vessel, the reactor vessel closure head, the passive residual heat removal heat exchanger, the integrated head package, the polar crane, and the refueling machine. The steam generators are also completed. The RV was installed within the containment vessel building in September 2011. The installation of this major equipment will allow the setting of the containment vessel top head. Haiyang Unit 1 is also achieving significant progress. Significant benefits continue to be realized as a result of lessons learned and experience gained

  1. Research Level I-V and QE Measurements

    SciTech Connect (OSTI)

    Emery, Keith

    2013-08-12

    A summary of key points related to research-level measurements of current-voltage (I-V) and quantum efficiency (QE) for various types of photovoltaic cells include the following: (1) Compare measurements with another trusted laboratory often enough to see the random error; (2) Have a calibration lab calibrate your research cell; (3) Document potential metastabilities and sensitivity to premeasurement conditions; (4) Measure the 1-sun spectral responsivity with a bias light level of 0.37 times the expected 1-sun short-current current; and (5) Be aware of bias rate artifacts in I-V and QE.

  2. Solar Energy Education. Reader, Part IV. Sun schooling (Technical Report) |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SciTech Connect Reader, Part IV. Sun schooling Citation Details In-Document Search Title: Solar Energy Education. Reader, Part IV. Sun schooling × You are accessing a document from the Department of Energy's (DOE) SciTech Connect. This site is a product of DOE's Office of Scientific and Technical Information (OSTI) and is provided as a public service. Visit OSTI to utilize additional information resources in energy science and technology. A paper copy of this document is also available for

  3. Deletion of the paired [alpha]5(IV) and [alpha]6(IV) collagen genes in inherited smooth muscle tumors

    SciTech Connect (OSTI)

    Zhou, J.; Mochizuki, T.; Reeders, S.T. ); Smeets, H. ); Antignac, C. ); Laurila, P. ); Paepe, A. de ); Tryggvason, K. )

    1993-08-27

    The gene encoding [alpha]6(IV) collagen, COL4A6, was identified on the human X chromosome in a head-to-head arrangement and within 452 base pairs of the [alpha]5(IV) collagen gene, COL4A5. In earlier studies, intragenic deletions of COL4A5 were detected in a subset of patients with Alport syndrome (AS), a hereditary defect of basement membranes. In some families, AS cosegregates with diffuse leiomyomatosis (DL), a benign smooth muscle tumor diathesis. Here it is shown that patients with AS-DL harbor deletions that disrupt both COL4A5 and COL4A6. Thus, type IV collagen may regulate smooth muscle differentiation and morphogenesis.

  4. Plutonium Oxidation and Subsequent Reduction by Mn (IV) Minerals

    SciTech Connect (OSTI)

    KAPLAN, DANIEL

    2005-09-13

    Plutonium sorbed to rock tuff was preferentially associated with manganese oxides. On tuff and synthetic pyrolusite (Mn{sup IV}O{sub 2}), Pu(IV) or Pu(V) was initially oxidized, but over time Pu(IV) became the predominant oxidation state of sorbed Pu. Reduction of Pu(V/VI), even on non-oxidizing surfaces, is proposed to result from a lower Gibbs free energy of the hydrolyzed Pu(IV) surface species versus that of the Pu(V) or Pu(VI) surface species. This work suggests that despite initial oxidation of sorbed Pu by oxidizing surfaces to more soluble forms, the less mobile form of Pu, Pu(IV), will dominate Pu solid phase speciation during long term geologic storage. The safe design of a radioactive waste or spent nuclear fuel geologic repository requires a risk assessment of radionuclides that may potentially be released into the surrounding environment. Geochemical knowledge of the radionuclide and the surrounding environment is required for predicting subsurface fate and transport. Although difficult even in simple systems, this task grows increasingly complicated for constituents, like Pu, that exhibit complex environmental chemistries. The environmental behavior of Pu can be influenced by complexation, precipitation, adsorption, colloid formation, and oxidation/reduction (redox) reactions (1-3). To predict the environmental mobility of Pu, the most important of these factors is Pu oxidation state. This is because Pu(IV) is generally 2 to 3 orders of magnitude less mobile than Pu(V) in most environments (4). Further complicating matters, Pu commonly exists simultaneously in several oxidation states (5, 6). Choppin (7) reported Pu may exist as Pu(IV), Pu(V), or Pu(VI) oxic natural groundwaters. It is generally accepted that plutonium associated with suspended particulate matter is predominantly Pu(IV) (8-10), whereas Pu in the aqueous phase is predominantly Pu(V) (2, 11-13). The influence of the character of Mn-containing minerals expected to be found in subsurface

  5. aps2007

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of heterodyned PCI measurements, ICRF simulation codes such as TORIC can be tested and wave amplitudes inside the plasma can be determined by "synthetic diagnostic" method...

  6. An equivalent circuit model and power calculations for the APS SPX crab cavities.

    SciTech Connect (OSTI)

    Berenc, T. )

    2012-03-21

    An equivalent parallel resistor-inductor-capacitor (RLC) circuit with beam loading for a polarized TM110 dipole-mode cavity is developed and minimum radio-frequency (rf) generator requirements are calculated for the Advanced Photon Source (APS) short-pulse x-ray (SPX) superconducting rf (SRF) crab cavities. A beam-loaded circuit model for polarized TM110 mode crab cavities was derived. The single-cavity minimum steady-state required generator power has been determined for the APS SPX crab cavities for a storage ring current of 200mA DC current as a function of external Q for various vertical offsets including beam tilt and uncontrollable detuning. Calculations to aid machine protection considerations were given.

  7. Results from the NRC AP600 testing program at the Oregon State University APEX facility

    SciTech Connect (OSTI)

    Reyes, J.N. Jr.; Bessette, D.E.; DiMarzo, M.

    1996-03-01

    The Department of Nuclear Engineering at Oregon State University (OSU) is performing a series of confirmatory tests for the U.S. Nuclear Regulatory Commission. These tests are being conducted in the Advanced Plant Experiment (APEX) facility which is a 1/4 length scale and 1/192 volume scale integral system simulation of the Westinghouse Advanced Passive 600 MWe (AP600) plant. The purpose of the testing program is to examine AP600 passive safety system performance, particularly during long term cooling. Thus far, OSU has successfully performed ten integral system tests for the NRC. This paper presents a description of the APEX facility and summarizes the important results of the NRC test program at OSU.

  8. Comparison of SPES-2 and APEX tests to examine AP600 integral system performance

    SciTech Connect (OSTI)

    Hochreiter, L.E.; Reyes, J.N. Jr.

    1995-12-31

    The Westinghouse Electric Corporation has performed a series of tests in the SPES-2 facility (Simulatore Per Esperienze di Sicurezza--Simulator for Safety Experimental Analysis) in Piacenza, Italy and in the APEX (Advanced Plant Experiment) facility, at Oregon State University. These testing programs are designed to evaluate the thermal hydraulic performance of the passive safety systems (gravity driven injection, natural convection, and passive cooling) of the Westinghouse Advanced Passive 600 MWe pressurized water reactor (AP600). They are also designed to obtain data that can be used to assess and validate the safety analysis techniques and computer codes being used to predict the transient system behavior of the AP600. This paper presents a comparison of the two test facility designs and the results of counterpart tests.

  9. Mechanical design upgrade of the APS storage ring rf cavity tuner

    SciTech Connect (OSTI)

    Jones, J.; Bromberek, D.; Kang, Y.

    1997-08-01

    The Advanced Photon Source (APS) storage ring (SR) rf system employs four banks of four spherical, single-cell resonant cavities. Each cavity is tuned by varying the cavity volume through insertion/retraction of a copper piston located at the circumference of the cavity and oriented perpendicular to the accelerator beam. During the commissioning of the APS SR, the tuners and cavity tuner ports were prone to extensive arcing and overheating. The existing tuners were modified to eliminate the problems, and two new, redesigned tuners were installed. In both cases marked improvements were obtained in the tuner mechanical performance. As measured by tuner piston and flange surface temperatures, tuner heating has been reduced by a factor of five in the new version. Redesign considerations discussed include tuner piston-to-housing alignment, tuner piston and housing materials and cooling configurations, and tuner piston sliding electrical contacts. The tuner redesign is also distinguished by a modular, more maintainable assembly.

  10. KP-AP-1-C Wholesale Power Rate Schedule | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1-C Wholesale Power Rate Schedule KP-AP-1-C Wholesale Power Rate Schedule Area: American Electric Power System: Kerr-Philpott This rate schedule shall be available to public bodies and cooperatives (any one of whom is hereinafter called the Customer) in Virginia to whom power may be transmitted and scheduled pursuant to contracts between the Government, American Electric Power Service Corporation (hereinafter called the Company), the Company's Transmission Operator, currently PJM Interconnection

  11. KP-AP-2-C Wholesale Power Rate Schedule | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2-C Wholesale Power Rate Schedule KP-AP-2-C Wholesale Power Rate Schedule Area: American Electric Power System: Kerr-Philpott This rate schedule shall be available to public bodies and cooperatives (any one of whom is hereinafter called the Customer) in Virginia to whom power may be transmitted pursuant to contracts between the Government, American Electric Power Service Corporation (hereinafter called the Company), the Company's Transmission Operator, currently PJM Interconnection LLC

  12. KP-AP-3-C Wholesale Power Rate Schedule | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3-C Wholesale Power Rate Schedule KP-AP-3-C Wholesale Power Rate Schedule Area: American Electric Power System: Kerr-Philpott This rate schedule shall be available to public bodies and cooperatives (any one of whom is hereinafter called the Customer) in Virginia to whom power may be scheduled pursuant to contracts between the Government, American Electric Power Service Corporation (hereinafter called the Company), PJM Interconnection LLC (hereinafter called PJM), and the Customer. This rate

  13. Parameter extraction from I-V characteristics of PV devices

    SciTech Connect (OSTI)

    Macabebe, Erees Queen B.; Sheppard, Charles J.; Dyk, E. Ernest van

    2011-01-15

    Device parameters such as series and shunt resistances, saturation current and diode ideality factor influence the behaviour of the current-voltage (I-V) characteristics of solar cells and photovoltaic modules. It is necessary to determine these parameters since performance parameters are derived from the I-V curve and information provided by the device parameters are useful in analyzing performance losses. This contribution presents device parameters of CuIn(Se,S){sub 2}- and Cu(In,Ga)(Se,S){sub 2}-based solar cells, as well as, CuInSe{sub 2}, mono- and multicrystalline silicon modules determined using a parameter extraction routine that employs Particle Swarm Optimization. The device parameters of the CuIn(Se,S){sub 2}- and Cu(In,Ga)(Se,S){sub 2}-based solar cells show that the contribution of recombination mechanisms exhibited by high saturation current when coupled with the effects of parasitic resistances result in lower maximum power and conversion efficiency. Device parameters of photovoltaic modules extracted from I-V characteristics obtained at higher temperature show increased saturation current. The extracted values also reflect the adverse effect of temperature on parasitic resistances. The parameters extracted from I-V curves offer an understanding of the different mechanisms involved in the operation of the devices. The parameter extraction routine utilized in this study is a useful tool in determining the device parameters which reveal the mechanisms affecting device performance. (author)

  14. DISCOVERY OF AN EXTENDED X-RAY JET IN AP LIBRAE

    SciTech Connect (OSTI)

    Kaufmann, S.; Wagner, S. J.; Tibolla, O.

    2013-10-20

    Chandra observations of the low-energy-peaked BL Lac object (LBL) AP Librae (AP Lib) revealed the clear discovery of a non-thermal X-ray jet. AP Lib is the first LBL with an extended non-thermal X-ray jet that shows emission into the very high energy range. The X-ray jet has an extension of ?15''(? 14 kpc). The X-ray jet morphology is similar to the radio jet observed with Very Large Array at 1.36 GHz emerging in the southeast direction and bends by 50 at a distance of 12'' toward the northeast. The intensity profiles of the X-ray emission studied are consistent with those found in the radio range. The spectral analysis reveals that the X-ray spectra of the core and jet region are both inverse-Compton-(IC)-dominated. This adds to a still small sample of BL Lac objects whose X-ray jets are IC-dominated and thus more similar to the high-luminosity Fanaroff-Riley II sources than to the low-luminosity Fanaroff-Riley I objects, which are usually considered to be the parent population of BL Lac objects.

  15. Analysis of an AP600 intermediate-size loss-of-coolant accident

    SciTech Connect (OSTI)

    Boyack, B.E.; Lime, J.F.

    1995-09-01

    A postulated double-ended guillotine break of an AP600 direct-vessel-injection line has been analyzed. This event is characterized as an intermediate-break loss-of-coolant accident. Most of the insights regarding the response of the AP600 safety systems to the postulated accident are derived from calculations preformed with the TRAC-PF1/MOD2 code. However, complementary insights derived from a scaled experiment conducted in the ROSA facility, as well as insights based upon calculations by other codes, are also presented. Based upon the calculated and experimental results, the AP600 will not experience a core heat up and will reach a safe shutdown state using only safety-class equipment. Only the early part of the long-term cooling period initiated by In-containment Refueling Water Storage Tank injection was evaluated. Thus, the observation that the core is continuously cooled should be verified for the later phase of the long-term cooling period when sump injection and containment cooling processes are important.

  16. Project W-519 CDR supplement: Raw water and electrical services for privatization contractor, AP tank farm operations

    SciTech Connect (OSTI)

    Parazin, R.J.

    1998-07-31

    This supplement to the Project W-519 Conceptual Design will identify a means to provide RW and Electrical services to serve the needs of the TWRS Privatization Contractor (PC) at AP Tank Farm as directed by DOE-RL. The RW will serve the fire suppression and untreated process water requirements for the PC. The purpose of this CDR supplement is to identify Raw Water (RW) and Electrical service line routes to the TWRS Privatization Contractor (PC) feed delivery tanks, AP-106 and/or AP-108, and establish associated cost impacts to the Project W-519 baseline.

  17. HUBBLE/COS OBSERVATIONS OF THE Ly{alpha} FOREST TOWARD THE BL Lac OBJECT 1ES 1553+113

    SciTech Connect (OSTI)

    Danforth, Charles W.; Keeney, Brian A.; Stocke, John T.; Shull, J. Michael; Yao Yangsen, E-mail: danforth@casa.colorado.ed [CASA, Department of Astrophysical and Planetary Sciences, University of Colorado, 389-UCB, Boulder, CO 80309 (United States)

    2010-09-01

    We present new moderate-resolution, far-ultraviolet spectra from the Hubble Space Telescope/Cosmic Origins Spectrograph (HST/COS) of the BL Lac object 1ES 1553+113 covering the wavelength range 1135 A < {lambda} < 1795 A. The data show a smooth continuum with a wealth of narrow (b < 100 km s{sup -1}) absorption features arising in the interstellar medium and intergalactic medium. These features include 41 Ly{alpha} absorbers at 0 < z{sub abs} < 0.43, 14 of which are detected in multiple Lyman lines and 6 of which show absorption in one or more metal lines. We analyze a metal-rich triplet ({Delta}cz {approx} 1000 km s{sup -1}) of Ly{alpha} absorbers at z{sub abs} {approx} 0.188 in which O VI, N V, and C III absorption is detected. Silicon ions (Si III, Si IV) are not detected to fairly strong upper limits and we use the measured Si III/C III upper limit to derive an abundance limit (C/Si) {>=} 4(C/Si){sub sun} for the strongest component of the absorber complex. Galaxy redshift surveys show a number of massive galaxies at approximately the same redshift as this absorption complex, suggesting that it arises in a large-scale galaxy filament. As one of the brightest extragalactic X-ray and {gamma}-ray sources, 1ES 1553+113 is of great interest to the high-energy astrophysics community. With no intrinsic emission or absorption features, 1ES 1553+113 has no direct redshift determination. We use intervening Ly{alpha} absorbers to place a direct limit on the redshift: z{sub em}>0.395 based on a confirmed Ly{alpha}+O VI absorber and z{sub em}>0.433 based on a single-line detection of Ly{alpha}. The current COS data are only sensitive to Ly{alpha} absorbers at z < 0.47, but we present statistical arguments that z{sub em} {approx}< 0.58 (at a 1{sigma} confidence limit) based on the non-detection of any Ly{beta} absorbers at z>0.4.

  18. EVALUATION OF AP-FARM SIMULANT COMPOSITION FOR ROTARY MICROFILTER TESTING

    SciTech Connect (OSTI)

    HUBER HJ

    2011-09-19

    This document identifies the feed composition of a Hanford AP tank farm simulant for rotary microfiltration testing. The composition is based on an Hanford Tank Waste Operations Simulator (HTWOS) model run in combination with Tank Waste Information Network (TWINS) data and mineralogical studies of actual waste solids. The feed simulant is intended to be used in test runs at SRNL. The simulant will be prepared in two parts: (1) A supernate, composed of water-soluble salts and (2) The undissolved (actually, undissolvable) solids. Test slurries with distinct solids concentrations (e.g., 0.5, 5 and 10 wt%) are then prepared as needed. The base for the composition of supernate and solids is the modeled feed sequence for a deployment scenario of the Supplemental Pretreatment units within AP-farm. These units comprise a filtration part, the RMF, and a Cesium-removal part, a Small Column Ion Exchange. The primary use of this simulant is for filtration testing - however, in case that it is also used for ion-exchange tests, the amount of Cs-137 that would need to be added is available in Table 1 and Attachment 3. A modified model run (MMR-049) of the Hanford Tank Waste Operations Simulator (HTWOS) system plan 6 case 3 was performed to identify the feed sequence. Case 3 assumed supplemental treatment besides the low activity waste (LAW) melter with supplemental pretreatment supporting the pretreatment facility. The MMR did not cap the duration of supplemental pretreatment to 15 months, but rather used it throughout the entire treatment mission as an add-on option to the pretreatment facility at the Waste Treatment and Immobilization Plant (WTP). Tank 241-AP-105 (AP-105) was chosen as the feed tank to the filtration unit. Other parameters included a fixed minimum of 0.5 wt% solids in the feed and a maximum Na-concentration of 5M in the supernate. The solids rejection from the filtration unit was set to 99.99% and the maximum allowed amount of solids within tank AP-105 was set

  19. Cerium(IV), Neptunium(IV), and Plutonium(IV) 1,2-phenyldiphosphonates: Correlations and Differences between Early Transuranium Elements and Their Proposed Surrogates

    SciTech Connect (OSTI)

    Diwu, Juan; Wang, Shuao; Liao, Zuolei; Burns, Peter C.; Albrecht-Schmitt, Thomas E.

    2010-10-04

    The in situ hydrothermal reduction of Np(VI) to Np(IV) and Pu(VI) to Pu(IV) in the presence of 1,2-phenylenediphosphonic acid (PhP2) results in the crystallization of Np[C6H4(PO3H)2]22H2O (NpPhP2) and Pu[C6H4(PO3H)(PO3H2)][C6H4(PO3H)(PO3)]2H2O (PuPhP2), respectively. Similar reactions have been explored with Ce(IV) resulting in the isolation of the Ce(IV) phenylenediphosphonate Ce[C6H4(PO3H)(PO3H2)][C6H4(PO3H)(PO3)]2H2O (CePhP2). Single crystal diffraction studies reveal that although all these three compounds all crystallize in the triclinic space group P1-, only PuPhP2 and CePhP2 are isotypic, whereas NpPhP2 adopts a distinct structure. In the cerium and plutonium compounds edge-sharing dimers of MO8 polyhedra are bridged by the diphosphonate ligand to create one-dimensional chains. NpPhP2 also forms chains. However, the NpO8 units are monomeric. The protonation of the ligands is also different in the two structure types. Furthermore, the NpO8 polyhedra are best described as square antiprisms (D4d), whereas the CeO8 and PuO8 units are trigonal dodecahedra (D2d). Bond-valence parameters of Ro = 1.972 and b = 0.538 have been derived for Np4+ using a combination of the data reported in this work with that available in crystallographic databases. The UV-vis-NIR absorption spectra of NpPhP2 and PuPhP2 are also reported and used to confirm the tetravalent oxidation states.

  20. INTERIM REPORT FOR HANFORD TANKS AY-102 & AP-101 EFFECT OF CHEMISTRY & OTHER VARIABLES ON CORROSION & STRESS CORROSION CRACKING

    SciTech Connect (OSTI)

    HARTY, W.M.

    2007-05-05

    The objective of this work is to determine the range of conditions where the tank steel is susceptible to localized corrosion and SCC in simulants for waste in tanks AY-102 and AP-101.

  1. Calibration Model Assignments expressed as U3O8, Summary Table ES-1 |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Model Assignments expressed as U3O8, Summary Table ES-1 Calibration Model Assignments expressed as U3O8, Summary Table ES-1 Calibration Model Assignments expressed as U3O8, Summary Table ES-1 Calibration Model Assignments expressed as U3O8, Summary Table ES-1 (25.9 KB) More Documents & Publications Field Calibration Facilities for Environmental Measurement of Radium, Thorium, and Potassium (October 2013) Offshore Wind Market and Economic Analysis Report 2013 Natural

  2. Companhia Mineira de A car e lcool Participa es | Open Energy...

    Open Energy Info (EERE)

    Mineira de A car e lcool Participa es Jump to: navigation, search Name: Companhia Mineira de Acar e lcool Participaes Place: Brazil Product: Brazilian sugar and...

  3. Evaluation of the Scaling of the APEX-1000 Test Facility to AP1000 for Design Basis Events

    SciTech Connect (OSTI)

    Wright, Richard F.; Gagnon, Andre; Skinner, Jesse; Groome, John

    2004-07-01

    The AP1000 is a 1000 MWe advanced nuclear power plant that uses passive safety features to enhance plant safety and to provide significant and measurable improvements in plant simplification, reliability, investment protection and plant costs. The AP1000 relies heavily on the 600 MWe AP600 which received design certification in 1999. A critical part of the AP600 design certification process involved the testing of the passive safety systems. A one-fourth height, one-fourth pressure test facility, APEX-600, was constructed at the Oregon State University to study design basis events, and to provide a body of data to be used to validate the computer models used to analyze the AP600. This facility was extensively modified to reflect the design changes for AP1000 including higher power in the electrically heated rods representing the reactor core, and changes in the size of the pressurizer, core makeup tanks and automatic depressurization system. Several design basis events have been simulated at APEX-1000 including double-ended direct vessel injection (DEDVI) line break, 2-inch cold leg break, and inadvertent actuation of the automatic depressurization system. These events were analyzed as part of the AP1000 safety analysis using the NOTRUMP computer code. Applying the scaling factors that were used to size the APEX-1000 facility, the test results can be compared to the NOTRUMP plant simulations. These comparisons indicate the similarity between the design basis events in AP1000 and APEX-1000, the adequacy of the scaling of APEX-1000, and the applicability of the NOTRUMP code. (authors)

  4. Improved Pharmacological and Structural Properties of HIV Fusion Inhibitor AP3 over Enfuvirtide: Highlighting Advantages of Artificial Peptide Strategy

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Zhu, Xiaojie; Zhu, Yun; Ye, Sheng; Wang, Qian; Xu, Wei; Su, Shan; Sun, Zhiwu; Yu, Fei; Liu, Qi; Wang, Chao; et al

    2015-08-19

    Enfuvirtide (T20), is the first HIV fusion inhibitor approved for treatment of HIV/AIDS patients who fail to respond to the current antiretroviral drugs. However, its clinical application is limited because of short half-life, drug resistance and cross-reactivity with the preexisting antibodies in HIV-infected patients. Using an artificial peptide strategy, we designed a peptide with non-native protein sequence, AP3, which exhibited potent antiviral activity against a broad spectrum of HIV-1 strains, including those resistant to T20, and had remarkably longer in vivo half-life than T20. While the preexisting antibodies in HIV-infected patients significantly suppressed T20’s antiviral activity, these antibodies neither recognizedmore » AP3, nor attenuated its anti-HIV-1 activity. Structurally different from T20, AP3 could fold into single-helix and interact with gp41 NHR. The two residues, Met and Thr, at the N-terminus of AP3 form a hook-like structure to stabilize interaction between AP3 and NHR helices. Therefore, AP3 has potential for further development as a new HIV fusion inhibitor with improved antiviral efficacy, resistance profile and pharmacological properties over enfuvirtide. Meanwhile, this study highlighted the advantages of artificially designed peptides, and confirmed that this strategy could be used in developing artificial peptide-based viral fusion inhibitors against HIV and other enveloped viruses.« less

  5. Safety evaluation of RTG launches aboard Titan IV launch vehicles

    SciTech Connect (OSTI)

    Rosko, Robert J.; Loughin, Stephen

    1997-01-10

    The analytical tool used to evaluate accidents aboard a Titan IV launch vehicle involving a Radioisotope Thermoelectric Generator (RTG) is discussed. The Launch Accident Scenario Evaluation Program-Titan IV version (LASEP-T) uses a Monte Carlo approach to determine the response of an RTG to various threatening environments. The threatening environments arise from a complex interplay of probabilistic and deterministic processes, and are therefore parameterized by a set of random variables with probability distributions. The assessment of the RTG response to a given environment is based on both empirical data and theoretical modeling. Imbedding detailed, complex response models into the LASEP-T calculation was not practical. Simpler response models have been constructed to capture both the inherent variability due to the phenomenology of the accident scenario along with the uncertainty of predicting response behavior. The treatment of variability and uncertainty as it pertains to the launch accident evaluation of RTG response will be discussed.

  6. IV. LMI Model Provisions for Shared Renewable Energy Programs

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    www.irecusa.org | LMI Guidelines | 35 IV. LMI Model Provisions for Shared Renewable Energy Programs As indicated at the outset, these LMI Guidelines and accompanying LMI Model Provisions are intended to function in tandem with IREC's Model Rules for Shared Renewable Energy Programs. For policymakers, regulators and other entities using and refining these LMI Model Provisions, IREC emphasizes that coordination with customer advocates, especially LMI customer advocates, environmental and

  7. Method of synthesis of anhydrous thorium(IV) complexes

    SciTech Connect (OSTI)

    Kiplinger, Jaqueline L; Cantat, Thibault

    2013-04-30

    Method of producing anhydrous thorium(IV) tetrahalide complexes, utilizing Th(NO.sub.3).sub.4(H.sub.2O).sub.x, where x is at least 4, as a reagent; method of producing thorium-containing complexes utilizing ThCl.sub.4(DME).sub.2 as a precursor; method of producing purified ThCl.sub.4(ligand).sub.x compounds, where x is from 2 to 9; and novel compounds having the structures: ##STR00001##

  8. Analysis of the raw data of sample plots in NFIMAP Cycle IV ...

    Open Energy Info (EERE)

    raw data of sample plots in NFIMAP Cycle IV (English version) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Analysis of the raw data of sample plots in NFIMAP Cycle IV...

  9. Sensitivities of I-V Parameters in C-Si PV Modules of Hygrothermal...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Sensitivities of I-V Parameters in C-Si PV Modules of Hygrothermal Stress Sensitivities of I-V Parameters in C-Si PV Modules of Hygrothermal Stress Presented at the PV Module ...

  10. Decay Heat Removal in GEN IV Gas-Cooled Fast Reactors (Journal...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Decay Heat Removal in GEN IV Gas-Cooled Fast Reactors Citation Details In-Document Search Title: Decay Heat Removal in GEN IV Gas-Cooled Fast Reactors The safety ...