National Library of Energy BETA

Sample records for irena joint implementation

  1. IRENA | OpenEI Community

    Open Energy Info (EERE)

    by Graham7781(2017) Super contributor 11 February, 2013 - 15:18 IRENA launches global atlas of renewable energy potential data Global Atlas IRENA OpenEI Renewable Energy Solar...

  2. IRENA Renewable Energy Indicators | Open Energy Information

    Open Energy Info (EERE)

    Indicators Jump to: navigation, search Name Developing the IRENA Renewable Energy Indicators (Phase I) AgencyCompany Organization Worldwatch Institute Partner International...

  3. International Renewable Energy Agency (IRENA) Feed | Open Energy...

    Open Energy Info (EERE)

    International Renewable Energy Agency (IRENA) Feed Jump to: navigation, search Home | About | Inventory | Partnerships | Capacity Building | Webinars | Reports | Events | News |...

  4. IRENA Renewable Energy Learning Partnership (IRELP) | Open Energy...

    Open Energy Info (EERE)

    Partnership (IRELP) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: IRENA Renewable Energy Learning Partnership (IRELP) AgencyCompany Organization: International...

  5. Joint Implementation Network (JIN) | Open Energy Information

    Open Energy Info (EERE)

    2.2 JIN Programs 3 References About Joint Implementation Network (JIN) was established in 1995 as knowledge centre for climate change policy issues in general and the concept of...

  6. US initiative on joint implementation: An overview

    SciTech Connect (OSTI)

    Dixon, R.K.

    1996-12-31

    More than 150 countries are now Party to United Nations Framework Convention on Climate Change, which seeks as its ultimate objective, to stabilize atmospheric concentrations of greenhouse gases at a level that would prevent dangerous human interference with the global climate system. As a step towards that goal, all Parties are to take measures to mitigate greenhouse gas emissions and to promote cooperation in the development and diffusion of technologies and practices that control or reduce emissions and enhance sinks of greenhouse gases. In the U.S. view, efforts between countries or entities within them to reduce net greenhouse gas emissions undertaken cooperatively, termed joint implementation (JI), holds significant potential both for reducing the threat of global climate change and for promoting sustainable development. To develop and operationalize the JI concept, the U.S. launched its Initiative on Joint Implementation (IJI) in October, 1993, and designed a program to attract private sector resources and to encourage the diffusion of innovative technologies to mitigate greenhouse gas emissions. The goals of U.S. IJI complement the principles of Decision 5, First Conference of the FCCC Parties, establishing an Activities Implemented Jointly pilot phase.

  7. IRENA launches global atlas of renewable energy potential | OpenEI...

    Open Energy Info (EERE)

    IRENA launches global atlas of renewable energy potential Home > Groups > Utility Rate Graham7781's picture Submitted by Graham7781(2017) Super contributor 11 February, 2013 -...

  8. The institutional needs of joint implementation projects

    SciTech Connect (OSTI)

    Watt, E.; Sathaye, J.; Buen, O. de; Masera, O.; Gelil, I.A.; Ravindranath, N.H.; Zhou, D.; Li, J.; Intarapravich, D.

    1995-10-21

    In this paper, the authors discuss options for developing institutions for joint implementation (JI) projects. They focus on the tasks which are unique to JI projects or require additional institutional needs--accepting the project by the host and investor countries and assessing the project`s greenhouse gas (GHG) emission reduction or sequestration--and they suggest the types of institutions that would enhance their performance. The evaluation is based on four sets of governmental and international criteria for JI projects, the experiences of ten pilot JI projects, and the perspectives of seven collaborating authors from China, Egypt, India, Mexico, and Thailand, who interviewed relevant government and non-government staff involved in JI issue assessment in their countries. After examining the roles for potential JI institutions, they present early findings arguing for a decentralized national JI structure, which includes: (1) national governmental panels providing host country acceptance of proposed JI projects; (2) project parties providing the assessment data on the GHG reduction or sequestration for the projects; (3) technical experts calculating these GHG flows; (4) certified verification teams checking the GHG calculations; and (5) members of an international JI Secretariat training and certifying the assessors, as well as resolving challenges to the verifications. 86 refs.

  9. Statement from Secretary Moniz on Implementation Day for the Joint

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Comprehensive Plan of Action | Department of Energy Statement from Secretary Moniz on Implementation Day for the Joint Comprehensive Plan of Action Statement from Secretary Moniz on Implementation Day for the Joint Comprehensive Plan of Action January 16, 2016 - 5:07pm Addthis News Media Contact (202) 586-4940 DOENews@hq.doe.gov Implementation Day is a milestone in the effort to ensure that Iran's nuclear program is exclusively peaceful in nature by blocking potential pathways to a bomb. As

  10. Institute of Development Studies Feed | Open Energy Information

    Open Energy Info (EERE)

    International Institute for Sustainable Development (IISD) International Renewable Energy Agency (IRENA) Joint Implementation Network (JIN) Kumasi Institute of Technology and...

  11. International Energy Agency Feed | Open Energy Information

    Open Energy Info (EERE)

    International Institute for Sustainable Development (IISD) International Renewable Energy Agency (IRENA) Joint Implementation Network (JIN) Kumasi Institute of Technology and...

  12. Centro de Energías Renovables (CER) Feed | Open Energy Information

    Open Energy Info (EERE)

    International Institute for Sustainable Development (IISD) International Renewable Energy Agency (IRENA) Joint Implementation Network (JIN) Kumasi Institute of Technology and...

  13. Ruminant methane reduction through livestock development in Tanzania. Final report for US Department of Energy and US Initiative on Joint Implementation--Activities Implemented Jointly

    SciTech Connect (OSTI)

    Livingston, Roderick

    1999-07-01

    This project was designed to help develop the US Initiative on Joint Implementation activities in Eastern Africa. It has been communicated in meetings with representatives from the Ministry of Environment of Tanzania and the consultant group that developed Tanzania's National Climate Change Action Plan, the Centre for Energy, Environment, Science and Technology, that this project fits very well with the developmental and environmental goals of the Government of Tanzania. The goal of the Activities Implemented Jointly ruminant livestock project is to reduce ruminant methane emissions in Eastern Africa. The project plans a sustainable cattle multiplication unit (CMU) at Mabuki Ranch in the Mwanza Region of Tanzania. This CMU will focus on raising genetically improved animals to be purchased by farmers, developmental organizations, and other CMUs in Tanzania. Through the purchase of these animals farmers will raise their income generation potential and reduce ruminant methane emissions.

  14. DOE and FERC Jointly Submit Implementation Proposal for The National Action Plan on Demand Response to Congress

    Office of Energy Efficiency and Renewable Energy (EERE)

    The U.S. Department of Energy and the Federal Energy Regulatory Commission (FERC) jointly submitted to Congress a required “Implementation Proposal for The National Action Plan on Demand Response.”

  15. The Challenge of Limiting Greenhouse Gas Emissions Through Activities implemented Jointly in Developing Countries: A Brazilian Perspective

    SciTech Connect (OSTI)

    La Rovere, E.L.

    1998-11-01

    This paper addresses, from the Brazilian perspective, the main problems with Joint Implementation/Activities Implemented Jointly (JI/AIJ) between industrialized (Annex I) and developing (non-Annex I) countries, as defined by the United Nations Framework Convention on Climate Change (UNFCCC). Four possible GHG emissions abatement measures are presented for Brazil: forest protection, reforestation projects for carbon sequestration or charcoal manufacturing, use of ethanol produced from sugar cane as a car fuel, and electrical energy conservation through an increase in end-use efficiencies. These four case studies form the basis of a discussion regarding the validity of developing countries' concerns about JI/AIJ. Recommendations are offered for overcoming the present shortcomings of JI/AIJ in developing countries. The primary conclusion is that Annex I countries' funding of JI/AIJ projects in developing countries in return for GHG emissions credits is not the best means to implement the UNFCCC. However, JI/AIJ projects can be a productive means of preventing global climate change if combined with other measures, including GHG emissions reduction targets for all countries involved in JI/AIJ projects and limits on the percentage of industrialized countries' emissions reductions that can be met through projects in developing countries.

  16. Activities implemented jointly: First report to the Secretariat of the United Nations Framework Convention on Climate Change. Accomplishments and descriptions of projects accepted under the U.S. Initiative on Joint Implementation

    SciTech Connect (OSTI)

    1996-07-01

    More than 150 countries are now Party to the United Nations Framework Convention on Climate Change (FCCC), which seeks, as its ultimate objective, to stabilize atmospheric concentrations of greenhouse gases at a level that would prevent dangerous human interference with the climate system. As a step toward this goal, all Parties are to take measures to mitigate climate change and to promote and cooperate in the development and diffusion of technologies and practices that control or reduce emissions and enhance sinks of greenhouse gases. In the US view, efforts between countries or entities within them to reduce net greenhouse gas emissions undertaken cooperatively--called joint implementation (JI)--holds significant potential both for combating the threat of global warming and for promoting sustainable development. To develop and operationalize the JI concept, the US launched its Initiative on Joint Implementation (USIJI) in October 1993, and designed the program to attract private sector resources and to encourage the diffusion of innovative technologies to mitigate climate change. The USIJI provides a mechanism for investments by US entities in projects to reduce greenhouse gas emissions worldwide and has developed a set of criteria for evaluating proposed projects for their potential to reduce net GHG emissions.

  17. Implementation Approach for Plug-in Electric Vehicles at Joint Base Lewis McChord. Task 4

    SciTech Connect (OSTI)

    Schey, Stephen; Francfort, Jim

    2014-12-01

    This study focused on Joint Base Lewis McChord (JBLM), which is located in Washington State. Task 1 consisted of a survey of the non-tactical fleet of vehicles at JBLM to begin the review of vehicle mission assignments and the types of vehicles in service. In Task 2, daily operational characteristics of select vehicles were identified and vehicle movements were recorded in data loggers in order to characterize the vehicles’ missions. In Task 3, the results of the data analysis and observations were provided. Individual observations of the selected vehicles provided the basis for recommendations related to PEV adoption (i.e., whether a battery electric vehicle or plug-in hybrid electric vehicle [collectively referred to as PEVs] can fulfill the mission requirements0, as well as the basis for recommendations related to placement of PEV charging infrastructure. This report focuses on an implementation plan for the near-term adoption of PEVs into the JBLM fleet.

  18. Joint Facilities User Forum

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Joint Environmental Management System (EMS) Joint Environmental Management System (EMS) Joint Environmental Management System (EMS) The environmental management system (EMS) has two areas of focus: environmental compliance and environmental sustainability. The environmental compliance aspect of the EMS consists of regulatory compliance and monitoring programs that implement federal, state, local, and tribal requirements; agreements; and permits under the Legacy Management contract. The

  19. NSF final project report planning and implementation of the U.S. Joint Global Ocean Flux Study (U.S. JGOFS)

    SciTech Connect (OSTI)

    Livingston, Hugh D.

    1996-07-01

    Conducted planning and implementation of ocean carbon dioxide hydrographic surveys ocean process studies, time-series studies of Bermuda and Hawaii, and sponsored scientific workshops for those activities.

  20. IRENA Global Atlas | Open Energy Information

    Open Energy Info (EERE)

    this information can make it easier to take this first step. Renewable energy databases mainly focus on specific aspects, such as physical information on insulation or wind...

  1. Ceramic joints

    DOE Patents [OSTI]

    Miller, Bradley J.; Patten, Jr., Donald O.

    1991-01-01

    Butt joints between materials having different coefficients of thermal expansion are prepared having a reduced probability of failure of stress facture. This is accomplished by narrowing/tapering the material having the lower coefficient of thermal expansion in a direction away from the joint interface and not joining the narrow-tapered surface to the material having the higher coefficient of thermal expansion.

  2. The role of the U.S. Clean Coal Technology Program in implementing the objectives of the joint Canada-U.S. acid rain mitigation initiative

    SciTech Connect (OSTI)

    Baldwin, A.L.; Smith, D.N.; Mann, A.W.; McIlvried, H.G.; Russell, D.L. Sr.

    1997-12-31

    The Clean Coal Technology (CCT) Program was initiated by the US Department of Energy (DOE) in part as a response to the 1986 Joint Report of the US and Canadian Special Envoys on Acid Rain, with a particular focus on coal-burning electric power plants. The fist three solicitations of the CCT Program were aimed primarily at mitigating the potential impacts of acid rain. Subsequently, the Clean Air Act Amendments of 1990 established emission reduction targets for SO{sub 2} and No{sub x}, which influenced the goals of the last two CCT Program. This paper provides an overview of the CCT Program and reports the significant results, with emphasis on emissions reduction as well as their impact on ozone formation.

  3. Final Report. SFAA No. DEFC02-98CH10961. Technical assistance for joint implementation and other supporting mechanisms and measures for greenhouse gas emissions mitigation

    SciTech Connect (OSTI)

    Knight, Denise

    2001-10-15

    IIEC, a division of CERF, has developed an extensive base of experience implementing activities that support climate action by developing USIJI projects in transitional countries within Asia, Latin America, Central and Eastern Europe, and southern Africa. IIEC has been able to provide a range of technical and policy assistance to governments and industry in support of sustainable energy use. IIEC continues to work in key countries with local partners to develop and implement energy efficiency policies and standards, develop site-specific projects, and assist governing bodies to establish national priorities and evaluation criteria for approving GHG-mitigation projects. As part of this project, IIEC focused on promoting a series of activities in Thailand and South Africa in order to identify GHG mitigation projects and work within the national approval process of those countries. The sections of this report outline the activities conducted in each country in order to achieve that goal.

  4. Joint Implementation Network Feed | Open Energy Information

    Open Energy Info (EERE)

    US Savannah River National Laboratory (SRNL) UNEP-Risoe Centre on Energy, Climate and Sustainable Development United Nations Environment Programme (UNEP) United Nations...

  5. Joint Implementation Network (JIN) | Open Energy Information

    Open Energy Info (EERE)

    knowledge centre for climate change policy issues in general and the concept of emissions trading in particular. During the first five years of its operation, JIN regularly...

  6. Joint Coordinating Committee | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    Joint Coordinating Committee

  7. Category:CLEAN Partner | Open Energy Information

    Open Energy Info (EERE)

    Atomic Energy Agency (IAEA) International Energy Agency (IEA) International Institute for Sustainable Development (IISD) International Renewable Energy Agency (IRENA) J Joint...

  8. Joint Environmental Management System (EMS) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Joint Environmental Management System (EMS) Joint Environmental Management System (EMS) Joint Environmental Management System (EMS) The environmental management system (EMS) has two areas of focus: environmental compliance and environmental sustainability. The environmental compliance aspect of the EMS consists of regulatory compliance and monitoring programs that implement federal, state, local, and tribal requirements; agreements; and permits under the Legacy Management contract. The

  9. Comments of the Joint Center for Political and Economic Studies |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Joint Center for Political and Economic Studies Comments of the Joint Center for Political and Economic Studies The Media and Technology Institute and the Climate Change Initiative at the Joint Center for Political and Economic Studies ("Joint Center")1 respectfully submit these comments in response to the United States Department of Energy's ("DoE") Request for Information regarding its implementation of the Smart Grid provisions of Federal

  10. Large displacement spherical joint

    DOE Patents [OSTI]

    Bieg, Lothar F.; Benavides, Gilbert L.

    2002-01-01

    A new class of spherical joints has a very large accessible full cone angle, a property which is beneficial for a wide range of applications. Despite the large cone angles, these joints move freely without singularities.

  11. 2014 Joint Action Workshop

    Broader source: Energy.gov [DOE]

    The Joint Action Workshop is an annual event for joint action agencies and their members to meet informally and discuss emerging policy, regulatory, and power supply issues, and other topics...

  12. International Renewable Energy Agency (IRENA) | Open Energy Informatio...

    Open Energy Info (EERE)

    With the global population projected to reach 10 billion in 2050, abundant renewable energy sources worldwide can make a significant contribution to the world's growing demand...

  13. WIPP - Joint Information Center

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The Joint Information Center is located at 4021 National Parks Highway in Carlsbad, N.M. Joint Information Center In the unlikely event of an emergency, the WIPP Joint Information Center (JIC) serves as a central control point to coordinate multi-agency efforts to issue timely and accurate information to the public, news media and project employees. Emergency contact information: The public If the JIC is activated, members of the general public, including family members, may call (575) 234-7380

  14. DOD Instruction 3030.3 - Joint Land Use Study Program | Open...

    Open Energy Info (EERE)

    ProgramPermittingRegulatory GuidanceInstructions Abstract This instruction implements policies, assigns responsibilities, and prescribes procedures for executing the Joint Land...

  15. High pressure ceramic joint

    DOE Patents [OSTI]

    Ward, M.E.; Harkins, B.D.

    1993-11-30

    Many recuperators have components which react to corrosive gases and are used in applications where the donor fluid includes highly corrosive gases. These recuperators have suffered reduced life, increased service or maintenance, and resulted in increased cost. The present joint when used with recuperators increases the use of ceramic components which do not react to highly corrosive gases. Thus, the present joint used with the present recuperator increases the life, reduces the service and maintenance, and reduces the increased cost associated with corrosive action of components used to manufacture recuperators. The present joint is comprised of a first ceramic member, a second ceramic member, a mechanical locking device having a groove defined in one of the first ceramic member and the second ceramic member. The joint and the mechanical locking device is further comprised of a refractory material disposed in the groove and contacting the first ceramic member and the second ceramic member. The present joint mechanically provides a high strength load bearing joint having good thermal cycling characteristics, good resistance to a corrosive environment and good steady state strength at elevated temperatures. 4 figures.

  16. High pressure ceramic joint

    DOE Patents [OSTI]

    Ward, Michael E.; Harkins, Bruce D.

    1993-01-01

    Many recuperators have components which react to corrosive gases and are used in applications where the donor fluid includes highly corrosive gases. These recuperators have suffered reduced life, increased service or maintenance, and resulted in increased cost. The present joint when used with recuperators increases the use of ceramic components which do not react to highly corrosive gases. Thus, the present joint used with the present recuperator increases the life, reduces the service and maintenance, and reduces the increased cost associated with corrosive action of components used to manufacture recuperators. The present joint is comprised of a first ceramic member, a second ceramic member, a mechanical locking device having a groove defined in one of the first ceramic member and the second ceramic member. The joint and the mechanical locking device is further comprised of a refractory material disposed in the groove and contacting the first ceramic member and the second ceramic member. The present joint mechanically provides a high strength load bearing joint having good thermal cycling characteristics, good resistance to a corrosive environment and good steady state strength at elevated temperatures.

  17. A computational model for three-dimensional jointed media with a single joint set; Yucca Mountain Site Characterization Project

    SciTech Connect (OSTI)

    Koteras, J.R.

    1994-02-01

    This report describes a three-dimensional model for jointed rock or other media with a single set of joints. The joint set consists of evenly spaced joint planes. The normal joint response is nonlinear elastic and is based on a rational polynomial. Joint shear stress is treated as being linear elastic in the shear stress versus slip displacement before attaining a critical stress level governed by a Mohr-Coulomb faction criterion. The three-dimensional model represents an extension of a two-dimensional, multi-joint model that has been in use for several years. Although most of the concepts in the two-dimensional model translate in a straightforward manner to three dimensions, the concept of slip on the joint planes becomes more complex in three dimensions. While slip in two dimensions can be treated as a scalar quantity, it must be treated as a vector in the joint plane in three dimensions. For the three-dimensional model proposed here, the slip direction is assumed to be the direction of maximum principal strain in the joint plane. Five test problems are presented to verify the correctness of the computational implementation of the model.

  18. Implementation Manual

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Skip navigation links BPA Energy Efficiency Plan BPA Post-2011 EE Role Implementation Manual Archives IM Document Library Interim Solution 2.0 Files Low Income Efficiency...

  19. Gamesa Santana Joint Venture | Open Energy Information

    Open Energy Info (EERE)

    Gamesa Santana Joint Venture Place: Spain Sector: Wind energy Product: Wind turbine manufacturing joint venture in Spain. References: Gamesa Santana Joint Venture1 This article...

  20. Majorana Demonstrator Bolted Joint Mechanical and Thermal Analysis

    SciTech Connect (OSTI)

    Aguayo Navarrete, Estanislao; Reid, Douglas J.; Fast, James E.

    2012-06-01

    The MAJORANA DEMONSTRATOR is designed to probe for neutrinoless double-beta decay, an extremely rare process with a half-life in the order of 1026 years. The experiment uses an ultra-low background, high-purity germanium detector array. The germanium crystals are both the source and the detector in this experiment. Operating these crystals as ionizing radiation detectors requires having them under cryogenic conditions (below 90 K). A liquid nitrogen thermosyphon is used to extract the heat from the detectors. The detector channels are arranged in strings and thermally coupled to the thermosyphon through a cold plate. The cold plate is joined to the thermosyphon by a bolted joint. This circular plate is housed inside the cryostat can. This document provides a detailed study of the bolted joint that connects the cold plate and the thermosyphon. An analysis of the mechanical and thermal properties of this bolted joint is presented. The force applied to the joint is derived from the torque applied to each one of the six bolts that form the joint. The thermal conductivity of the joint is measured as a function of applied force. The required heat conductivity for a successful experiment is the combination of the thermal conductivity of the detector string and this joint. The thermal behavior of the joint is experimentally implemented and analyzed in this study.

  1. Proactive DSA application and implementation

    SciTech Connect (OSTI)

    Draelos, T.; Hamilton, V.; Istrail, G.

    1998-05-03

    Data authentication as provided by digital signatures is a well known technique for verifying data sent via untrusted network links. Recent work has extended digital signatures to allow jointly generated signatures using threshold techniques. In addition, new proactive mechanisms have been developed to protect the joint private key over long periods of time and to allow each of the parties involved to verify the actions of the other parties. In this paper, the authors describe an application in which proactive digital signature techniques are a particularly valuable tool. They describe the proactive DSA protocol and discuss the underlying software tools that they found valuable in developing an implementation. Finally, the authors briefly describe the protocol and note difficulties they experienced and continue to experience in implementing this complex cryptographic protocol.

  2. Double slotted socket spherical joint

    SciTech Connect (OSTI)

    Bieg, Lothar F.; Benavides, Gilbert L.

    2001-05-22

    A new class of spherical joints is disclosed. These spherical joints are capable of extremely large angular displacements (full cone angles in excess of 270.degree.), while exhibiting no singularities or dead spots in their range of motion. These joints can improve or simplify a wide range of mechanical devices.

  3. Italy Joint Statement

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    JOINT STATEMENT BY SECRETARY SPENCER ABRAHAM OF THE UNITED STATES OF AMERICA AND MINISTER ANTONIO MARZANO OF THE REPUBLIC OF ITALY ON COOPERATION IN ENERGY TECHNOLOGIES ROME, ITALY AUGUST , 2003 We affirm our commitment, on behalf of the United States of America and the Republic of Italy, to collaborate both bilaterally and multilaterally on accelerating the development of the hydrogen economy as part of our broadening cooperation on clean energy technologies. We aim to work together to enhance

  4. Formation of tough composite joints

    SciTech Connect (OSTI)

    Brun, M.K.

    1997-05-01

    Joints which exhibit tough fracture behavior were formed in a composite with a Si/SiC matrix reinforced with Textron SCS-6 fibers with either boron nitride or silicon nitride fiber coatings. In composites with BN coatings fibers were aligned uniaxially, while composites with Si{sub 3}N{sub 4}-coated fibers had a 0/90{degree} architecture. Lapped joints (joints with overlapping fingers) were necessary to obtain tough behavior. Geometrical requirements necessary to avoid brittle joint failure have been proposed. Joints with a simple overlap geometry (only a few fingers) would have to be very long in order to prevent brittle failure. Typical failure in these joints is caused by a crack propagating along the interfaces between the joint fingers. Joints of the same overall length, but with geometry changed to be symmetric about the joint centerline and with an extra shear surface exhibited tough fractures accompanied with extensive fiber pullout. The initial matrix cracking of these joints was relatively low because cracks propagated easily through the ends of the fingers. Joints with an optimized stepped sawtooth geometry produced composite-like failures with the stress/strain curves containing an elastic region followed by a region of rising stress with an increase of strain. Increasing the fiber/matrix interfacial strength from 9 to 25 MPa, by changing the fiber coating, increased matrix cracking and ultimate strength of the composite significantly. The best joints had matrix cracking stress and ultimate strength of 138 and 240 MPa, respectively. Joint failure was preceded by multiple matrix cracking in the entire composite. The high strength of the joints will permit building of structures containing joints with only a minor reduction of design stresses.

  5. Stochastic Joint Inversion for Integrated Data Interpretation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Stochastic Joint Inversion for Integrated Data Interpretation in Geothermal Exploration Stochastic Joint Inversion for Integrated Data Interpretation in Geothermal Exploration ...

  6. Jointly Sponsored Research Program

    SciTech Connect (OSTI)

    Everett A. Sondreal; John G. Hendrikson; Thomas A. Erickson

    2009-03-31

    U.S. Department of Energy (DOE) Cooperative Agreement DE-FC26-98FT40321 funded through the Office of Fossil Energy and administered at the National Energy Technology Laboratory (NETL) supported the performance of a Jointly Sponsored Research Program (JSRP) at the Energy & Environmental Research Center (EERC) with a minimum 50% nonfederal cost share to assist industry in commercializing and effectively applying highly efficient, nonpolluting energy systems that meet the nation's requirements for clean fuels, chemicals, and electricity in the 21st century. The EERC in partnership with its nonfederal partners jointly performed 131 JSRP projects for which the total DOE cost share was $22,716,634 (38%) and the nonfederal share was $36,776,573 (62%). Summaries of these projects are presented in this report for six program areas: (1) resource characterization and waste management, (2) air quality assessment and control, (3) advanced power systems, (4) advanced fuel forms, (5) value-added coproducts, and (6) advanced materials. The work performed under this agreement addressed DOE goals for reductions in CO{sub 2} emissions through efficiency, capture, and sequestration; near-zero emissions from highly efficient coal-fired power plants; environmental control capabilities for SO{sub 2}, NO{sub x}, fine respirable particulate (PM{sub 2.5}), and mercury; alternative transportation fuels including liquid synfuels and hydrogen; and synergistic integration of fossil and renewable resources.

  7. Thermoacoustic method for relaxation of residual stresses in welded joints

    SciTech Connect (OSTI)

    Koshovyi, V.V.; Pakhn`o, M.I.; Tsykhan, O.I.

    1995-01-01

    We propose a thermoacoustic method for the relaxation of residual stresses in welded joints, present a block diagram of a generator of local thermoacoustic pulses designed for implementation of this method, and describe our experiment aimed at relaxation of residual tensile stresses.

  8. Metal to ceramic sealed joint

    DOE Patents [OSTI]

    Lasecki, J.V.; Novak, R.F.; McBride, J.R.

    1991-08-27

    A metal to ceramic sealed joint which can withstand wide variations in temperature and maintain a good seal is provided for use in a device adapted to withstand thermal cycling from about 20 to about 1000 degrees C. The sealed joint includes a metal member, a ceramic member having an end portion, and an active metal braze forming a joint to seal the metal member to the ceramic member. The joint is positioned remote from the end portion of the ceramic member to avoid stresses at the ends or edges of the ceramic member. The sealed joint is particularly suited for use to form sealed metal to ceramic joints in a thermoelectric generator such as a sodium heat engine where a solid ceramic electrolyte is joined to metal parts in the system. 11 figures.

  9. Metal to ceramic sealed joint

    DOE Patents [OSTI]

    Lasecki, John V.; Novak, Robert F.; McBride, James R.

    1991-01-01

    A metal to ceramic sealed joint which can withstand wide variations in temperature and maintain a good seal is provided for use in a device adapted to withstand thermal cycling from about 20 to about 1000 degrees C. The sealed joint includes a metal member, a ceramic member having an end portion, and an active metal braze forming a joint to seal the metal member to the ceramic member. The joint is positioned remote from the end portion of the ceramic member to avoid stresses at the ends or edges of the ceramic member. The sealed joint is particularly suited for use to form sealed metal to ceramic joints in a thermoelectric generator such as a sodium heat engine where a solid ceramic electrolyte is joined to metal parts in the system.

  10. PNNL: About PNNL - Joint Appointments

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Yong Wang Dunning leads the Northwest Institute for Advanced Computing, a partnership of PNNL and the University of Washington. Joint Appointments PNNL seeks opportunities to build...

  11. CRUCIFORM CONTROL ROD JOINT

    DOE Patents [OSTI]

    Thorp, A.G. II

    1962-08-01

    An invention is described which relates to nuclear reactor control rod components and more particularly to a joint between cruciform control rod members and cruciform control rod follower members. In one embodiment this invention provides interfitting crossed arms at adjacent ends of a control rod and its follower in abutting relation. This holds the members against relative opposite longitudinal movement while a compression member keys the arms against relative opposite rotation around a common axis. Means are also provided for centering the control rod and its follower on a common axis and for selectively releasing the control rod from its follower for the insertion of a replacement of the control rod and reuse of the follower. (AEC)

  12. Shock transmissibility of threaded joints

    SciTech Connect (OSTI)

    Hansen, N.R.; Bateman, V.I.; Brown, F.A.

    1996-12-31

    Sandia National Laboratories (SNL) designs mechanical systems with threaded joints that must survive high shock environments. These mechanical systems include penetrators that must survive soil and rock penetration; drilling pipe strings that must survive rock-cutting, shock environments; and laydown weapons that must survive delivery impact shock. This paper summarizes an analytical study and an experimental evaluation of compressive, one-dimensional, shock transmission through a threaded joint in a split Hopkinson bar configuration. Thread geometries were scaled to simulate large diameter threaded joints with loadings parallel to the axis of the threads. Both strain and acceleration were evaluated with experimental measurements and analysis. Analytical results confirm the experimental conclusions that in this split Hopkinson bar configuration, the change in the one-dimensional shock wave by the threaded joint is localized to a length equal to a few diameters` length beyond the threaded joint.

  13. Method of forming a joint

    DOE Patents [OSTI]

    Butt, Darryl Paul; Cutler, Raymond Ashton; Rynders, Steven Walton; Carolan, Michael Francis

    2006-08-22

    A method of joining at least two sintered bodies to form a composite structure, including providing a first multicomponent metallic oxide having a perovskitic or fluorite crystal structure; providing a second sintered body including a second multicomponent metallic oxide having a crystal structure of the same type as the first; and providing at an interface a joint material containing at least one metal oxide containing at least one metal identically contained in at least one of the first and second multicomponent metallic oxides. The joint material is free of cations of Si, Ge, Sn, Pb, P and Te and has a melting point below the sintering temperatures of both sintered bodies. The joint material is heated to a temperature above the melting point of the metal oxide(s) and below the sintering temperatures of the sintered bodies to form the joint. Structures containing such joints are also disclosed.

  14. Italy Joint Statement | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Italy Joint Statement Italy Joint Statement " U.S.-Italy Joint Statement prepared as part of the International Partnership for a Hydrogen Economy " italy_joint_statement.pdf (63.17 KB) More Documents & Publications (Energy Efficiency) Joint Statement by Energy Ministers of G8, The People's Republic of China, India and The Republic of Korea (June 2008) Joint Statement by Energy Ministers of G8, The People's Republic of China, India and The Republic of Korea

  15. Russian Health Studies Program - Joint Coordinating Committee...

    Broader source: Energy.gov (indexed) [DOE]

    Joint Coordinating Committee for Radiation Effects Research (JCCRER) All About the Joint Coordinating Committee for Radiation Effects Research What is the JCCRER? Why is it ...

  16. Climate Leaders Joint Venture | Open Energy Information

    Open Energy Info (EERE)

    Leaders Joint Venture Jump to: navigation, search Name: Climate Leaders' Joint Venture Place: Dallas, Texas Product: Tudor Investment and Camco International have partnered to...

  17. Malibu Joint Venture | Open Energy Information

    Open Energy Info (EERE)

    Malibu Joint Venture Jump to: navigation, search Name: Malibu Joint Venture Place: Germany Sector: Solar Product: String representation "German utility ... e of next year." is too...

  18. Joint DOE-Rosatom Statement

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Joint Statement on the U.S. - Russian Excess Weapon-grade Plutonium Disposition Program The U.S. Department of Energy (DOE) and the Federal Atomic Energy Agency, Russian Federation ...

  19. Preparing for Project Implementation Financing Project Implementation

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Financing Project Implementation Save Energy Now LEADER Web Conference Project Implementation Seminar Series Save Energy Now LEADER Web Conference Agenda Seminar Series ...

  20. US/Brazil joint pilot project objectives

    SciTech Connect (OSTI)

    1997-12-01

    This paper describes a joint US/Brazil pilot project for rural electrification, whose major goals are: to establish technical, institutional, and economic confidence in using renewable energy (PV and wind) to meet the needs of the citizens of rural Brazil; to establish on-going institutional, individual and business relationships necessary to implement sustainable programs and commitments; to lay the groundwork for larger scale rural electrification through the use of distributed renewable technologies. The projects have supported low power home lighting systems, lighting and refrigeration for schools and medical centers, and water pumping systems. This is viewed as a long term project, where much of the equipment will come from the US, but Brazil will be responsible for program management, and sharing data gained from the program. The paper describes in detail the Brazilian program which was instituted to support this phased project.

  1. WTP Safety Culture Advice Joint Topic (HSEP/TWC)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    January 2012 v1 Page 1 of 2 Note: The views expressed in committee meetings should not be considered a substitute for full HAB consensus on any particular issue. WTP Safety Culture Advice Joint Topic (HSEP/TWC) Framing questions for discussion regarding DOE's recently released Implementation Plan: Re: Secretary Chu's response to the DNFSB with the Implementation Plan for Recommendation 2011-1 (December 27, 2011) Note: The ORP coordinator for the DOE Response to DNFSB 2011-1 is Steve Pfaff. o

  2. Step 4: Project Implementation

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Process Step 4: Project Implementation Presentation Agenda * Step 4: Project Implementation - Pre-construction - Contract execution - Interconnection - Project construction - Commissioning * Project Example 2 1/28/2016 2 1 Potential 3 Refinement 5 Operations & Maintenance 2 Options 4 Implementation 4 Implementation 3 Potential Options Refinement Implementation Operations & Maintenance Step 4: Implementation 4 Purpose: Contract and begin physical construction of project Tasks: * Finalize

  3. Joint BioEnergy Institute

    SciTech Connect (OSTI)

    Keasling, Jay; Simmons, Blake; Tartaglino, Virginia; Baidoo, Edward; Kothari, Ankita

    2015-06-15

    The Joint BioEnergy Institute (JBEI) is a U.S. Department of Energy (DOE) Bioenergy Research Center dedicated to developing advanced biofuels—liquid fuels derived from the solar energy stored in plant biomass that can replace gasoline, diesel and jet fuels.

  4. Joint Munitions Program | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    Joint Munitions Program DODDOE NNSA Joint Munitions Program: 30 years of collaborative ... This year marks more than 30 years of partnership through the JMP to improve and invest in ...

  5. Digital Sofcell Digital Ultracap joint venture | Open Energy...

    Open Energy Info (EERE)

    Ultracap joint venture Jump to: navigation, search Name: Digital Sofcell - Digital Ultracap joint venture Product: Digital Sofcell will joint venture with Digital Ultracap to...

  6. CLEERS Coordination & Joint Development of Benchmark Kinetics...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications CLEERS Coordination & Joint Development of Benchmark Kinetics for LNT & SCR CLEERS Coordination & Development of Catalyst Process Kinetic...

  7. Research and development joint ventures

    SciTech Connect (OSTI)

    Not Available

    1984-01-01

    Three panels made up of members of Congress and representatives of research and high technology industries testified at a hearing held to consider H.R. 1952 and H.R. 3393, both bills dealing with joint venture policies that diminish US competitiveness. The bills are designed to eliminate disincentives stemming from antitrust concerns about joint research and development (R and D) activities and to encourage private investment in R and D. The witnesses were asked to evaluate and compare the potential of these bills to overcome institutional barriers and to stimulate capital formation. Three appendices with statements from the National Association of Manufacturers, the Semiconductor Industry Association, and the Institute of Electrical and Electronics Engineers submitted for the record follow the testimony of the eight witnesses. (DCK)

  8. Metal-ceramic joint assembly

    DOE Patents [OSTI]

    Li, Jian

    2002-01-01

    A metal-ceramic joint assembly in which a brazing alloy is situated between metallic and ceramic members. The metallic member is either an aluminum-containing stainless steel, a high chromium-content ferritic stainless steel or an iron nickel alloy with a corrosion protection coating. The brazing alloy, in turn, is either an Au-based or Ni-based alloy with a brazing temperature in the range of 9500 to 1200.degree. C.

  9. Intermetallic Layers in Soldered Joints

    Energy Science and Technology Software Center (OSTI)

    1998-12-10

    ILAG solves the one-dimensional partial differential equations describing the multiphase, multicomponent, solid-state diffusion-controlled growth of intermetallic layers in soldered joints. This software provides an analysis capability for materials researchers to examine intermetallic growth mechanisms in a wide variety of defense and commercial applications involving both traditional and advanced materials. ILAG calculates the interface positions of the layers, as well as the spatial distribution of constituent mass fractions, and outputs the results at user-prescribed simulation times.

  10. Probabilistic Accident Consequence Uncertainty - A Joint CEC/USNRC Study

    SciTech Connect (OSTI)

    Gregory, Julie J.; Harper, Frederick T.

    1999-07-28

    The joint USNRC/CEC consequence uncertainty study was chartered after the development of two new probabilistic accident consequence codes, MACCS in the U.S. and COSYMA in Europe. Both the USNRC and CEC had a vested interest in expanding the knowledge base of the uncertainty associated with consequence modeling, and teamed up to co-sponsor a consequence uncertainty study. The information acquired from the study was expected to provide understanding of the strengths and weaknesses of current models as well as a basis for direction of future research. This paper looks at the elicitation process implemented in the joint study and discusses some of the uncertainty distributions provided by eight panels of experts from the U.S. and Europe that were convened to provide responses to the elicitation. The phenomenological areas addressed by the expert panels include atmospheric dispersion and deposition, deposited material and external doses, food chain, early health effects, late health effects and internal dosimetry.

  11. Joint Statement of the U.S.-Iraq Joint Coordinating Committee on Energy |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy of the U.S.-Iraq Joint Coordinating Committee on Energy Joint Statement of the U.S.-Iraq Joint Coordinating Committee on Energy April 23, 2012 - 2:25pm Addthis The governments of the United States of America and the Republic of Iraq reaffirmed their commitment to joint cooperation in the areas of oil production and export, natural gas, electricity, and critical energy infrastructure protection during the inaugural meeting of the Joint Coordinating Committee (JCC) on

  12. Implementing Executive Order 13423

    Broader source: Energy.gov [DOE]

    Guide describes the instructions on the requirements and how fleets should implement the Executive Order 13423.

  13. Joint Environmental Management System (EMS) Declaration of Conformance...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Services Environmental Management System Joint Environmental Management System (EMS) Declaration of Conformance Joint Environmental Management System (EMS) Declaration of ...

  14. Joint Center for Artificial Photosynthesis

    ScienceCinema (OSTI)

    Koval, Carl; Lee, Kenny; Houle, Frances; Lewis, Nate

    2013-12-19

    The Joint Center for Artificial Photosynthesis (JCAP) is the nation's largest research program dedicated to the development of an artificial solar-fuel generation technology. Established in 2010 as a U.S. Department of Energy (DOE) Energy Innovation Hub, JCAP aims to find a cost-effective method to produce fuels using only sunlight, water, and carbon dioxide as inputs. JCAP brings together more than 140 top scientists and researchers from the California Institute of Technology and its lead partner, Berkeley Lab, along with collaborators from the SLAC National Accelerator Laboratory, and the University of California campuses at Irvine and San Diego.

  15. Joint DOE-Rosatom Statement

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Statement on the U.S. - Russian Excess Weapon-grade Plutonium Disposition Program The U.S. Department of Energy (DOE) and the Federal Atomic Energy Agency, Russian Federation (Rosatom), as the Executive Agents for the implementation of the 2000 Plutonium Management and Disposition Agreement, hereby reaffirm their commitment to implementing the 2000 Agreement and effective and transparent disposition of 34 metric tons each of weapon- grade plutonium designated as no longer required for defense

  16. High-temperature brazed ceramic joints

    DOE Patents [OSTI]

    Jarvinen, Philip O.

    1986-01-01

    High-temperature joints formed from metallized ceramics are disclosed wherein the metal coatings on the ceramics are vacuum sputtered thereon.

  17. Joint Convention | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    Joint Convention U.S. Leads Fifth International Review Meeting on the Safety of Spent Fuel and Radioactive Waste Management at the IAEA VIENNA, AUSTRIA - Today, representatives...

  18. Joint Actinide Shock Physics Experimental Research | National...

    National Nuclear Security Administration (NNSA)

    Joint Actinide Shock Physics Experimental Research The JASPER gas gun at the Nevada ... For more information visit JASPER's webpage. Jasper Gun Related Topics Maintaining the ...

  19. LDRD joint computational/experimental project

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    LDRD joint computationalexperimental project - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy ...

  20. Joint Outreach Task Group Calendar: September 2013

    Broader source: Energy.gov [DOE]

    Joint Outreach Task Group (JOTG)has created a monthly calendar of community events to facilitate interagency and community involvement in these events. September 2013

  1. CLEERS Coordination & Joint Development of Benchmark Kinetics...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Catalyst Process Kinetic Data CLEERS Coordination & Joint Development of Benchmark Kinetics for LNT & SCR Functionality of Commercial NOx Storage-Reduction Catalysts...

  2. High temperature ceramic/metal joint structure

    DOE Patents [OSTI]

    Boyd, Gary L.

    1991-01-01

    A high temperature turbine engine includes a hybrid ceramic/metallic rotor member having ceramic/metal joint structure. The disclosed joint is able to endure higher temperatures than previously possible, and aids in controlling heat transfer in the rotor member.

  3. EM Contributes to Joint Convention Meeting

    Broader source: Energy.gov [DOE]

    EM officials recently participated in the Fifth Review Meeting of the Parties to the Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management (Joint Convention) at the International Atomic Energy Agency (IAEA) headquarters.

  4. MODELING UNDERGROUND STRUCTURE VULNERABILITY IN JOINTED ROCK

    SciTech Connect (OSTI)

    R. SWIFT; D. STEEDMAN

    2001-02-01

    The vulnerability of underground structures and openings in deep jointed rock to ground shock attack is of chief concern to military planning and security. Damage and/or loss of stability to a structure in jointed rock, often manifested as brittle failure and accompanied with block movement, can depend significantly on jointed properties, such as spacing, orientation, strength, and block character. We apply a hybrid Discrete Element Method combined with the Smooth Particle Hydrodynamics approach to simulate the MIGHTY NORTH event, a definitive high-explosive test performed on an aluminum lined cylindrical opening in jointed Salem limestone. Representing limestone with discrete elements having elastic-equivalence and explicit brittle tensile behavior and the liner as an elastic-plastic continuum provides good agreement with the experiment and damage obtained with finite-element simulations. Extending the approach to parameter variations shows damage is substantially altered by differences in joint geometry and liner properties.

  5. Unveiling the Implementation Guide

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Oak Ridge National Laboratory www.ornl.gov Unveiling the Implementation Guide October 11, 2011 Michaela Martin Program Manager Residential, Commercial, and Industrial Energy Efficiency Oak Ridge National Laboratory 2 | Oak Ridge National Laboratory www.ornl.gov Guiding Principles for Successfully Implementing Industrial Energy Assessment Recommendations * New resource for industry * Identifies key principles and actions that lead to successful implementation of energy assessment recommendations

  6. Implementing Bayesian Statistics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Appliance & Equipment Standards » Implementation, Certification and Enforcement Implementation, Certification and Enforcement The U.S. Department of Energy (DOE) is authorized by the Energy Policy and Conservation Act of 1975 (as amended) to enforce compliance with the energy and water conservation standards established for certain consumer products and commercial and industrial equipment. To ensure the implementation of the current standards for covered appliances and equipment, DOE has

  7. U.S.-Brazil Strategic Energy Dialogue Joint Report | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Dialogue Joint Report U.S.-Brazil Strategic Energy Dialogue Joint Report PDF icon First Joint Report to Presidents on U.S.-Brazil Strategic Energy Dialogue.pdf More Documents &...

  8. U.S.-Japan Joint Statement | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    -Japan Joint Statement U.S.-Japan Joint Statement U.S.-Japan Joint Statement prepared as part of the International Partnership for a Hydrogen Economy PDF icon usjapanstatementre...

  9. United States and France Sign Joint Statement on Civil Liability...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and France Sign Joint Statement on Civil Liability for Nuclear Damage United States and France Sign Joint Statement on Civil Liability for Nuclear Damage Joint Statement Signed.pdf ...

  10. Sealed joint structure for electrochemical device

    DOE Patents [OSTI]

    Tucker, Michael C; Jacobson, Craig P; De Jonghe, Lutgard C; Visco, Steven J

    2013-05-21

    Several members make up a joint in a high-temperature electrochemical device, wherein the various members perform different functions. The joint is useful for joining multiple cells (generally tubular modules) of an electrochemical device to produce a multi-cell segment-in-series stack for a solid oxide fuel cell, for instance. The joint includes sections that bond the joining members to each other; one or more seal sections that provide gas-tightness, and sections providing electrical connection and/or electrical insulation between the various joining members. A suitable joint configuration for an electrochemical device has a metal joint housing, a first porous electrode, a second porous electrode, separated from the first porous electrode by a solid electrolyte, and an insulating member disposed between the metal joint housing and the electrolyte and second electrode. One or more brazes structurally and electrically connects the first electrode to the metal joint housing and forms a gas tight seal between the first electrode and the second electrode.

  11. INSPECTION OF FUSION JOINTS IN PLASTIC PIPE

    SciTech Connect (OSTI)

    Alex Savitski; Connie Reichert; John Coffey

    2005-07-13

    The standard method of joining plastic pipe in the field is the butt fusion process. As in any pipeline application, joint quality greatly affects overall operational safety of the system. Currently no simple, reliable, cost effective method of assessing the quality of fusion joints in the field exists. Visual examination and pressure testing are current non-destructive approaches, which do not provide any assurance about the long-term pipeline performance. This project will develop, demonstrate, and validate an in-situ non-destructive inspection method for butt fusion joints in gas distribution plastic pipelines. The inspection system will include a laser based image-recognition system that will automatically generate and interpret digital images of pipe joints and assign them a pass/fail rating, which eliminates operator bias in evaluating joint quality. A Weld Zone Inspection Method (WZIM) is being developed in which local heat is applied to the joint region to relax the residual stresses formed by the original joining operation and reveal the surface condition of the joint. In cases where the joint is not formed under optimal conditions, and the intermolecular forces between contacting surfaces are not strong enough, the relaxation of macromolecules in the surface layer causes the material to pull back, revealing a fusion line. If the joint is sound, the bond line image does not develop. To establish initial feasibility of the approach, welds were performed under standard and nonstandard conditions. These welds were subjected to the WZIM and tensile testing. There appears to be a direct correlation between the WZIM and tensile testing results. Although WZIM appears to be more sensitive than tensile testing can verify, the approach appears valid.

  12. Inspection of Fusion Joints in Plastic Pipe

    SciTech Connect (OSTI)

    Connie Reichert

    2005-09-01

    The standard method of joining plastic pipe in the field is the butt fusion process. As in any pipeline application, joint quality greatly affects overall operational safety of the system. Currently no simple, reliable, cost-effective method exists for assessing the quality of fusion joints in the field. Visual examination and pressure testing are current nondestructive approaches, which do not provide any assurance about the long-term pipeline performance. This project developed, demonstrated, and validated an in-situ nondestructive inspection method for butt fusion joints in gas distribution plastic pipelines. The inspection system includes a laser-based image-recognition system that automatically generates and interprets digital images of pipe joints and assigns them a pass/fail rating, which eliminates operator bias in evaluating joint quality. An EWI-patented process, the Weld Zone Inspection Method (WZIM) was developed in which local heat is applied to the joint region to relax the residual stresses formed by the original joining operation, which reveals the surface condition of the joint. In cases where the joint is not formed under optimal conditions, and the intermolecular forces between contacting surfaces are not strong enough, the relaxation of macromolecules in the surface layer causes the material to pull back, revealing a fusion line. If the joint is sound, the bond line image does not develop. To establish initial feasibility of the approach, welds were performed under standard and nonstandard conditions. These welds were subjected to the WZIM and two destructive forms of testing: short-term tensile testing and long-term creep rupture testing. There appears to be a direct correlation between the WZIM and the destructive testing results. Although WZIM appears to be more sensitive than destructive testing can verify, the approach appears valid.

  13. Environmental protection Implementation Plan

    SciTech Connect (OSTI)

    R. C. Holland

    1999-12-01

    This ``Environmental Protection Implementation Plan'' is intended to ensure that the environmental program objectives of Department of Energy Order 5400.1 are achieved at SNL/California. This document states SNL/California's commitment to conduct its operations in an environmentally safe and responsible manner. The ``Environmental Protection Implementation Plan'' helps management and staff comply with applicable environmental responsibilities.

  14. United States and Japan Sign Joint Nuclear Energy Action Plan...

    Office of Environmental Management (EM)

    Japan Sign Joint Nuclear Energy Action Plan to Promote Nuclear Energy Cooperation United States and Japan Sign Joint Nuclear Energy Action Plan to Promote Nuclear Energy ...

  15. Ryazan Metal Ceramics Instrumentation Plant Joint Stock Co RMCIP...

    Open Energy Info (EERE)

    Ryazan Metal Ceramics Instrumentation Plant Joint Stock Co RMCIP JSC Jump to: navigation, search Name: Ryazan Metal Ceramics Instrumentation Plant Joint Stock Co (RMCIP JSC) Place:...

  16. Joint Fuel Cell Technologies and Advanced Manufacturing Webinar...

    Broader source: Energy.gov (indexed) [DOE]

    the presentation slides from the "Joint Fuel Cell Technologies Office and Advanced Manufacturing Office Webinar" held November 20, 2012. PDF icon Joint Fuel Cell Technologies ...

  17. 11th Annual Energy Department Joint Genome Institute Genomics...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    11th Annual Energy Department Joint Genome Institute Genomics of Energy & Environment Meeting 11th Annual Energy Department Joint Genome Institute Genomics of Energy & Environment ...

  18. EA-1945: Northern Mid-Columbia Joint Project; Grant, Douglas...

    Office of Environmental Management (EM)

    5: Northern Mid-Columbia Joint Project; Grant, Douglas, and Chelan Counties, Washington EA-1945: Northern Mid-Columbia Joint Project; Grant, Douglas, and Chelan Counties, ...

  19. New Report Describes Joint Opportunities for Natural Gas and...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Report Describes Joint Opportunities for Natural Gas and Hydrogen Fuel Cell Vehicle Markets New Report Describes Joint Opportunities for Natural Gas and Hydrogen Fuel Cell Vehicle...

  20. Joint inversion of electrical and seismic data for Fracture char...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Joint inversion of electrical and seismic data for Fracture char. and Imaging of Fluid Flow in Geothermal Systems Joint inversion of electrical and seismic data for Fracture char. ...

  1. EA-1945: Northern Mid-Columbia Joint Project; Grant, Douglas...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    EA-1945: Northern Mid-Columbia Joint Project; Grant, Douglas, and Chelan Counties, Washington EA-1945: Northern Mid-Columbia Joint Project; Grant, Douglas, and Chelan Counties, ...

  2. Tianjin Lishen Battery Joint stock Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    Lishen Battery Joint stock Co Ltd Jump to: navigation, search Name: Tianjin Lishen Battery Joint-stock Co Ltd Place: Tianjin, Tianjin Municipality, China Zip: 300384 Product:...

  3. Joint inversion in coupled quasi-static poroelasticity (Journal...

    Office of Scientific and Technical Information (OSTI)

    Joint inversion in coupled quasi-static poroelasticity Citation Details In-Document Search Title: Joint inversion in coupled quasi-static poroelasticity Authors: Hesse, Marc A. ; ...

  4. Joint Meeting on Hydrogen Delivery Modeling and Analysis Meeting...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Agenda Joint Meeting on Hydrogen Delivery Modeling and Analysis Meeting Agenda Agenda for the Joint Meeting on Hydrogen Delivery Modeling and Analysis, May 8-9, 2007 ...

  5. Joint Meeting on Hydrogen Delivery Modeling and Analysis, May...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Joint Meeting on Hydrogen Delivery Modeling and Analysis, May 8-9, 2007, Discussion ... the Joint Meeting on Hydrogen Delivery Modeling and Analysis, May 8-9, 2007. ...

  6. Joint Meeting on Hydrogen Delivery Modeling and Analysis Meeting...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Joint Meeting on Hydrogen Delivery Modeling and Analysis Meeting Attendees List Attendee list from the Joint Meeting on Hydrogen Delivery Modeling and Analysis, May 8-9, 2007 ...

  7. DOE Joint Solid-State Lighting Roundtables on Science Challenges...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE Joint Solid-State Lighting Roundtables on Science Challenges DOE Joint Solid-State Lighting Roundtables on Science Challenges PDF icon 2014BES-EEREroundtables...

  8. Joint Venture Established Between Russian Weapons Plant And the...

    National Nuclear Security Administration (NNSA)

    Jobs Apply for Our Jobs Our Jobs Working at NNSA Blog Home Library Press Releases Joint Venture Established Between Russian Weapons Plant ... Joint Venture Established...

  9. International Power Girasolar joint company | Open Energy Information

    Open Energy Info (EERE)

    search Name: International Power Girasolar joint company Sector: Solar Product: Joint venture announced between US IPWG and Netherlands-headquartered Girasolar, to...

  10. US, Russian Federation Sign Joint Statement on Reactor Conversion...

    Office of Environmental Management (EM)

    US, Russian Federation Sign Joint Statement on Reactor Conversion US, Russian Federation Sign Joint Statement on Reactor Conversion June 26, 2012 - 12:00pm Addthis News Media ...

  11. "Bionic" Liquids from Lignin: Joint BioEnergy Institute Results...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Bionic" Liquids from Lignin: Joint BioEnergy Institute Results Pave the Way for ... Combustion Research Facility Joint BioEnergy Institute Research Engineering and ...

  12. Joint Global Change Research Institute | Open Energy Information

    Open Energy Info (EERE)

    solutions. Joint Institute staff bring decades of experience and expertise to bear in science, technology, economics, and policy. "The Joint Global Change Research Institute...

  13. Third National Report for the Joint Convention on the Safety...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Third National Report for the Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management Third National Report for the Joint ...

  14. Fifth National Report for the Joint Convention on the Safety...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Fifth National Report for the Joint Convention on the Safety of Spent Fuel Management and the Safety of Radioactive Waste Management Fifth National Report for the Joint Convention ...

  15. National Report Joint Convention on the Safety of Spent Fuel...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    National Report Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management National Report Joint Convention on the Safety of Spent ...

  16. Second National Report for the Joint Convention on the Safety...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Second National Report for the Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management Second National Report for the Joint ...

  17. Fourth National Report for the Joint Convention on the Safety...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Fourth National Report for the Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management Fourth National Report for the Joint ...

  18. Joint Actinide Shock Physics Experimental Research - JASPER

    ScienceCinema (OSTI)

    None

    2015-01-09

    Commonly known as JASPER the Joint Actinide Shock Physics Experimental Research facility is a two stage light gas gun used to study the behavior of plutonium and other materials under high pressures, temperatures, and strain rates.

  19. Joint Actinide Shock Physics Experimental Research - JASPER

    SciTech Connect (OSTI)

    2014-10-31

    Commonly known as JASPER the Joint Actinide Shock Physics Experimental Research facility is a two stage light gas gun used to study the behavior of plutonium and other materials under high pressures, temperatures, and strain rates.

  20. Joint Genome Institute's Automation Approach and History

    SciTech Connect (OSTI)

    Roberts, Simon

    2006-07-05

    Department of Energy/Joint Genome Institute (DOE/JGI) collaborates with DOE national laboratories and community users, to advance genome science in support of the DOE missions of clean bio-energy, carbon cycling, and bioremediation.

  1. CHARACTERIZATION OF DAMPING IN BOLTED LAP JOINTS

    SciTech Connect (OSTI)

    C. MALONEY; D. PEAIRS; ET AL

    2000-08-01

    The dynamic response of a jointed beam was measured in laboratory experiments. The data were analyzed and the system was mathematically modeled to establish plausible representations of joint damping behavior. Damping is examined in an approximate, local linear framework using log decrement and half power bandwidth approaches. in addition, damping is modeled in a nonlinear framework using a hybrid surface irregularities model that employs a bristles-construct. Experimental and analytical results are presented.

  2. Videos - Joint Center for Energy Storage Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    February 19, 2014, Videos David Willets Visits JCESR UK Universities and Science Minister, David Willetts, visited Argonne National Laboratory and the Joint Center for Energy Storage Research (JCESR). Read More December 18, 2013, Videos Clean Energy 2030: Building a Sustainable Future JCESR Director George Crabtree discusses the future of clean energy in "Clean Energy 2030: Building a Sustainable Future," a UChicago - Argonne - Fermilab Joint Speaker Series Event held at Argonne. Read

  3. Vehicle Technologies Program Implementation

    SciTech Connect (OSTI)

    none,

    2009-06-19

    The Vehicle Technologies Program takes a systematic approach to Program implementation. Elements of this approach include the evaluation of new technologies, competitive selection of projects and partners, review of Program and project improvement, project tracking, and portfolio management and adjustment.

  4. Blackout Final Implementation Report

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Final Report on the Implementation of the Task Force Recommendations U.S.-Canada Power System Outage Task Force Natural Resources Canada U.S. Department of Energy September 2006 Final Report on the Implementation of the Task Force Recommendations U.S.-Canada Power System Outage Task Force September 2006 Natural Resources Canada U.S. Department of Energy Acknowledgments This document was prepared by staff of Natural Resources Canada and the U.S. Department of Energy. The principal contributors

  5. ORISE: Policy Implementation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Policy Implementation The Oak Ridge Institute for Science and Education (ORISE) assists the U.S. Department of Energy (DOE) Office of Science in the implementation of its program directed at ensuring compliance with federal and DOE regulations pertaining to the protection of human subjects participating in research. The Federal Policy for the Protection of Human Subjects was adopted by DOE on June 18, 1991, as Title 10 Code of Federal Regulations 745, Protection of Human Subjects, and expressed

  6. DOC-DOE Joint China Mission Statement | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Joint China Mission Statement DOC-DOE Joint China Mission Statement DOC-DOE Joint China Mission Statement DOC-DOE Joint China Mission Statement (109.75 KB) More Documents & Publications DOC-DOE China Mission Announcement Press Release FACT SHEET: U.S.-China Clean Energy Cooperation Announcements US-China Clean Energy Cooperation

  7. Qualification of the Joints for ITER Central Solenoid

    SciTech Connect (OSTI)

    Martovetsky, Nicolai N; Berryhill, Adam B; Kenney, Steven J

    2012-01-01

    The ITER Central Solenoid has 36 interpancake joints, 12 bus joints, and 12 feeder joints in the magnet. The joints are required to have resistance below 4 nOhm at 45 kA at 4.5 K. The US ITER Project Office developed two different types of interpancake joints with some variations in details in order to find a better design, qualify the joints, and establish a fabrication process. We built and tested four samples of the sintered joints and two samples with butt-bonded joints (a total of eight joints). Both designs met the specifications. Results of the joint development, test results, and selection of the baseline design are presented and discussed in the paper.

  8. Joint Center for Energy Storage Research - Joint Center for Energy Storage

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Research 30, 2012, Videos Joint Center for Energy Storage Research The Joint Center for Energy Storage Research (JCESR) is a major research partnership that integrates government, academic, and industrial researchers from many disciplines to overcome critical scientific and technical barriers and create new breakthrough energy storage technology.

  9. Robust, Multifunctional Joint for Large Scale Power Production Stacks -

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Energy Innovation Portal Robust, Multifunctional Joint for Large Scale Power Production Stacks Lawrence Berkeley National Laboratory Contact LBL About This Technology DIAGRAM OF BERKELEY LAB'S MULTIFUNCTIONAL JOINT DIAGRAM OF BERKELEY LAB'S MULTIFUNCTIONAL JOINT Technology Marketing SummaryBerkeley Lab scientists have developed a multifunctional joint for metal supported, tubular SOFCs that divides various joint functions so that materials and methods optimizing each function can be chosen

  10. Handbook on dynamics of jointed structures.

    SciTech Connect (OSTI)

    Ames, Nicoli M.; Lauffer, James P.; Jew, Michael D.; Segalman, Daniel Joseph; Gregory, Danny Lynn; Starr, Michael James; Resor, Brian Ray

    2009-07-01

    The problem of understanding and modeling the complicated physics underlying the action and response of the interfaces in typical structures under dynamic loading conditions has occupied researchers for many decades. This handbook presents an integrated approach to the goal of dynamic modeling of typical jointed structures, beginning with a mathematical assessment of experimental or simulation data, development of constitutive models to account for load histories to deformation, establishment of kinematic models coupling to the continuum models, and application of finite element analysis leading to dynamic structural simulation. In addition, formulations are discussed to mitigate the very short simulation time steps that appear to be required in numerical simulation for problems such as this. This handbook satisfies the commitment to DOE that Sandia will develop the technical content and write a Joints Handbook. The content will include: (1) Methods for characterizing the nonlinear stiffness and energy dissipation for typical joints used in mechanical systems and components. (2) The methodology will include practical guidance on experiments, and reduced order models that can be used to characterize joint behavior. (3) Examples for typical bolted and screw joints will be provided.

  11. Qualification of the Joints for the ITER Central Solenoid

    SciTech Connect (OSTI)

    Martovetsky, N; Berryhill, A; Kenney, S

    2011-09-01

    The ITER Central Solenoid has 36 interpancake joints, 12 bus joints, and 12 feeder joints in the magnet. The joints are required to have resistance below 4 nOhm at 45 kA at 4.5 K. The US ITER Project Office developed two different types of interpancake joints with some variations in details in order to find a better design, qualify the joints, and establish a fabrication process. We built and tested four samples of the sintered joints and two samples with butt-bonded joints (a total of eight joints). Both designs met the specifications. Results of the joint development, test results, and selection of the baseline design are presented and discussed in the paper. The ITER Central Solenoid (CS) consists of six modules. Each module is composed of six wound hexapancakes and one quadrapancake. The multipancakes are connected electrically and hydraulically by in-line interpancake joints. The joints are located at the outside diameter (OD) of the module. Cable in conduit conductor (CICC) high-current joints are critical elements in the CICC magnets. In addition to low resistivity, the CS joints must fit a space envelope equivalent to the regular conductor cross section and must have low hydraulic impedance and enough structural strength to withstand the hoop and compressive forces during operation, including cycling. This paper is the continuation of the work reported on the intermodule joints.

  12. Environmental protection implementation plan

    SciTech Connect (OSTI)

    Holland, R.C.

    1998-03-01

    This Environmental Protection Implementation Plan is intended to ensure that the environmental program objectives of Department of Energy Order 5400.1 are achieved at SNL/California. This document states SNL/California`s commitment to conduct its operations in an environmentally safe and responsible manner. The Environmental Protection Implementation Plan helps management and staff comply with applicable environmental responsibilities. SNL is committed to operating in full compliance with the letter and spirit of applicable environmental laws, regulations, and standards. Furthermore, SNL/California strives to go beyond compliance with legal requirements by making every effort practical to reduce impacts to the environment to levels as low as reasonably achievable.

  13. IPv6 Implementation Checklist

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    IPv6 Implementation Checklist Engineering Services The Network OSCARS Fasterdata IPv6 Network IPv6 Implementation Checklist ESnet IPv6 Mirror Servers ESnet IPv6 History ESnet supports Sandia and APNIC IPv6 Background Radiation research Network Performance Tools The ESnet Engineering Team Contact Us Technical Assistance: 1 800-33-ESnet (Inside US) 1 800-333-7638 (Inside US) 1 510-486-7600 (Globally) 1 510-486-7607 (Globally) Report Network Problems: trouble@es.net Provide Web Site Feedback:

  14. Progress and interim results of the INPRO joint study on assessment of INS based on closed nuclear fuel cycle with fast reactors

    SciTech Connect (OSTI)

    Usanov, Vladimir; Raj, Baldev; Vasile, Alfredo

    2007-07-01

    The purpose of the work is to review interim results of the Joint Study on assessment of an Innovative Nuclear System based on a Closed Nuclear Fuel Cycle with Fast Reactors (INS CNFC-FR). This study is a part of the IAEA international project for innovative reactors and fuel cycle technologies (INPRO). Now it is being implemented by Canada, China, France, India, Japan, Republic of Korea, Russia, and Ukraine. A report on results of implementation of the first phase of the Joint Study was presented to the INPRO Steering Committee meeting in December 2006. It was also agreed by the Joint Study participants to reveal these results to broader discussion at scientific conferences and meetings. The authors' interpretation of the Joint Study findings and issues is presented in the paper. (authors)

  15. U.S.-Japan Joint Statement

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    STATE Office of the Spokesman For Immediate Release August 7, 2003 2003/817 STATEMENT BY PHILIP T. REEKER, DEPUTY SPOKESMAN Joint Statement of The United States and Japan on High-Level Consultations on Climate Change Following is the text of a joint statement released by the U.S. and Japan following the third meeting of High-Level Consultations on Climate Change, in Washington, D.C., August 7, 2003. Under Secretary of State for Global Affairs Paula Dobriansky led the U.S. delegation and Minister

  16. Managing inventory costs through joint procurement programs

    SciTech Connect (OSTI)

    Harlan, T.E. ); Williams, M.C. )

    1992-01-01

    Given current economic and regulatory challenges, utilities are facing the need to manage inventories more efficiently, lower spare parts costs, and reduce the downtime associated with equipment failure. Two programs helping utilities achieve these goals are the Joint Procurement Corporation (JPC) for multicompany purchase of common equipment and services and the pooled inventory management (PIM) program for joint purchase and storage of nuclear generating unit spare parts. Both of these are cooperative programs that decrease the probability of extended plant outages and reduce duplication of effort and/or inventory among participating utilities.

  17. Thomas Moore creates joint invention with MIT

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Thomas Moore creates joint invention with MIT 20 Nov 2009 For Arizona State University (ASU) Professor Thomas Moore, an invitation to guest lecture became a demonstration in a lab which led to a seafood lunch - which led to a joint invention with colleagues from the Massachusetts Institute of Technology (MIT) that contributed to a sustainable energy start-up company. Moore had been asked to speak at a summer course taught by well-known MIT Professor Daniel Nocera and, after the lecture, Moore

  18. A National Forum on Demand Response: Results on What Remains to Be Done to Achieve Its Potential- Program Design and Implementation Working Group

    Broader source: Energy.gov [DOE]

    In July 2011, the Federal Energy Regulatory Commission's (FERC) staff and the Department of Energy (DOE) jointly submitted to Congress a required “Implementation Proposal for the National Action...

  19. Transition Implementation Guide

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2001-04-24

    This Guide was prepared to aid in the development, planning, and implementation of requirements and activities during the transition phase at Department of Energy (DOE) facilities that have been declared or are forecast to become excess to any future mission requirements.

  20. Plans, Implementation, and Results

    Broader source: Energy.gov [DOE]

    The Bioenergy Technologies Office carries out technology research, development, and deployment through an ongoing process of planning and analysis, implementation, and review. This Web page includes links to documents that support and document the program management process, and the results and public benefits that derive from it.

  1. Wide temperature range seal for demountable joints

    DOE Patents [OSTI]

    Sixsmith, Herbert; Valenzuela, Javier A.; Nutt, William E.

    1991-07-23

    The present invention is directed to a seal for demountable joints operating over a wide temperature range down to liquid helium temperatures. The seal has anti-extrusion guards which prevent extrusion of the soft ductile sealant material, which may be indium or an alloy thereof.

  2. Joint with application in electrochemical devices

    DOE Patents [OSTI]

    Weil, K Scott [Richland, WA; Hardy, John S [Richland, WA

    2010-09-14

    A joint for use in electrochemical devices, such as solid oxide fuel cells (SOFCs), oxygen separators, and hydrogen separators, that will maintain a hermetic seal at operating temperatures of greater than 600.degree. C., despite repeated thermal cycling excess of 600.degree. C. in a hostile operating environment where one side of the joint is continuously exposed to an oxidizing atmosphere and the other side is continuously exposed to a wet reducing gas. The joint is formed of a metal part, a ceramic part, and a flexible gasket. The flexible gasket is metal, but is thinner and more flexible than the metal part. As the joint is heated and cooled, the flexible gasket is configured to flex in response to changes in the relative size of the metal part and the ceramic part brought about by differences in the coefficient of thermal expansion of the metal part and the ceramic part, such that substantially all of the tension created by the differences in the expansion and contraction of the ceramic and metal parts is absorbed and dissipated by flexing the flexible gasket.

  3. Wide temperature range seal for demountable joints

    DOE Patents [OSTI]

    Sixsmith, H.; Valenzuela, J.A.; Nutt, W.E.

    1991-07-23

    The present invention is directed to a seal for demountable joints operating over a wide temperature range down to liquid helium temperatures. The seal has anti-extrusion guards which prevent extrusion of the soft ductile sealant material, which may be indium or an alloy thereof. 6 figures.

  4. Executive Order 13423 Implementing Instructions

    Broader source: Energy.gov [DOE]

    INSTRUCTIONS FOR IMPLEMENTING EXECUTIVE ORDER 13423“Strengthening Federal Environmental, Energy, and Transportation Management”

  5. Joint statement of the European Commission's Joint Research Centre and the

    National Nuclear Security Administration (NNSA)

    United States Department of Energy's National Nuclear Security Administration regarding the reduction of excess nuclear material | National Nuclear Security Administration | (NNSA) Joint statement of the European Commission's Joint Research Centre and the United States Department of Energy's National Nuclear Security Administration regarding the reduction of excess nuclear material March 24, 2014 Nuclear safety and security are priorities for the European Union and the United States of

  6. Introduction to Using NERSC for the Joint Genome Institute

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NERSC Introduction to Using NERSC for the Joint Genome Institute May 2, 2011 jgi logo sm NERSC Training Event 1:00-5:00 p.m. PDT May 2, 2011 Joint Genome Institute, 2800 Mitchell...

  7. Tianjin B M Science Technology Joint Stock Ltd | Open Energy...

    Open Energy Info (EERE)

    Science Technology Joint Stock Ltd Jump to: navigation, search Name: Tianjin B&M Science & Technology Joint Stock, Ltd Place: China Product: China-based maker of cathode material...

  8. Microbial Genomics Data from the DOE Joint Genome Institute (JGI)

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    As of March 2008, The Joint Genome Institute has released 296 Prokaryotic microbial sites, with 216 in finished status.

  9. Russian Health Studies Program - Joint Coordinating Committee for Radiation

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Effects Research (JCCRER) | Department of Energy Joint Coordinating Committee for Radiation Effects Research (JCCRER) Russian Health Studies Program - Joint Coordinating Committee for Radiation Effects Research (JCCRER) Joint Coordinating Committee for Radiation Effects Research (JCCRER) All About the Joint Coordinating Committee for Radiation Effects Research What is the JCCRER? Why is it important? DOE's Russian Health Studies Program Principal Areas of Cooperation Under the JCCRER

  10. Seismic Capacity of Threaded, Brazed, and Grooved Pipe Joints

    Office of Environmental Management (EM)

    SEISMIC CAPACITY OF THREADED, BRAZED AND GROOVED PIPE JOINTS Brent Gutierrez, PhD, PE George Antaki, PE, F.ASME DOE NPH Conference October 25-26, 2011 Motivation * Understand the behavior and failure mode of common joints under extreme lateral loads * Static and shake table tests conducted of pressurized - Threaded, - Brazed, - Mechanical joints Static Testing o Pressurized spool to 150 psi o Steady downward force applied while recording deflections o Grooved clamped mech. joints * 16 tests

  11. Federal Building Metering Implementation Plan Template | Department...

    Office of Environmental Management (EM)

    Implementation Plan Template Federal Building Metering Implementation Plan Template Document provides a template for a federal building metering implementation plan....

  12. Implementing Advances in Transport Security Technologies | Department...

    Office of Environmental Management (EM)

    Implementing Advances in Transport Security Technologies Implementing Advances in Transport Security Technologies Implementing Advances in Transport Security Technologies More...

  13. U.S.-European Union Joint Statement | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    European Union Joint Statement U.S.-European Union Joint Statement U.S.-European Union Joint Statement prepared as part of the International Partnership for a Hydrogen Economy us_eu_hydrogen_summit_statement.pdf (61.18 KB) More Documents & Publications Microsoft Word - Document1 International Partnerships for the Hydrogen Economy Fact Sheet International Partnerships for the Hydrogen Economy Fact Sheet

  14. 2010_Nuclear_Security_Joint_Statement.pdf | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    _Nuclear_Security_Joint_Statement.pdf 2010_Nuclear_Security_Joint_Statement.pdf (411.14 KB) More Documents & Publications United States and France Sign Joint Statement on Civil Liability for Nuclear Damage US-Japan_NuclearEnergyActionPlan.pdf Before the Senate Armed Services Committee

  15. Adhesive joint and composites modeling in SIERRA.

    SciTech Connect (OSTI)

    Ohashi, Yuki; Brown, Arthur A.; Hammerand, Daniel Carl; Adolf, Douglas Brian; Chambers, Robert S.; Foulk, James W., III

    2005-11-01

    Polymers and fiber-reinforced polymer matrix composites play an important role in many Defense Program applications. Recently an advanced nonlinear viscoelastic model for polymers has been developed and incorporated into ADAGIO, Sandia's SIERRA-based quasi-static analysis code. Standard linear elastic shell and continuum models for fiber-reinforced polymer-matrix composites have also been added to ADAGIO. This report details the use of these models for advanced adhesive joint and composites simulations carried out as part of an Advanced Simulation and Computing Advanced Deployment (ASC AD) project. More specifically, the thermo-mechanical response of an adhesive joint when loaded during repeated thermal cycling is simulated, the response of some composite rings under internal pressurization is calculated, and the performance of a composite container subjected to internal pressurization, thermal loading, and distributed mechanical loading is determined. Finally, general comparisons between the continuum and shell element approaches for modeling composites using ADAGIO are given.

  16. U.S.-European Union Joint Statement

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    JOINT STATEMENT BY PRESIDENT GEORGE W. BUSH, EUROPEAN COUNCIL PRESIDENT KONSTANDINOS SIMITIS, AND EUROPEAN COMMISSION PRESIDENT ROMANO PRODI ON THE HYDROGEN ECONOMY We affirm our commitment, on behalf of the United States and the European Union, to collaborate on accelerating the development of the hydrogen economy as part of our broadening cooperation on energy. We aim to enhance the security of energy supply, increase diversity of energy sources, and improve local and global environmental

  17. Presentations - Joint Center for Energy Storage Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Presentations To view notes or play video, please download. JCESR Presentations at the 228th Electrochemical Society Meeting, Phoenix, AZ (10-11-15) The Joint Center for Energy Storage Research (JCESR): A New Paradigm for Energy Storage Research George Crabtree, JCESR Director Overcoming Key Challenges for a Viable Lithium-Sulfur Transportation Battery Kevin Zavadil, JCESR Thrust PI, Chemical Transformation Pathways to Non-aqueous Redox Flow (NRF) Batteries for Grid Storage Fikile Brushett,

  18. The oil and gas joint operating agreement

    SciTech Connect (OSTI)

    Not Available

    1990-01-01

    This book covers the following topics: introduction to the AAPL model form operating agreement; property provisions of the operating agreement; Article 6---the drilling and development article; duties and obligations revisited---who bear what risk of loss; operator's liens; accounting procedure joint operations; insurance; taking gas in kind absent a balancing agreement; RMMLF Form 5 Gas Balancing Agreement; tax partnerships for nontax professionals; alternative agreement forms.

  19. Joint voltages resulting from lightning currents.

    SciTech Connect (OSTI)

    Johnson, William Arthur; Warne, Larry Kevin; Merewether, Kimball O.; Chen, Kenneth C.

    2007-03-01

    Simple formulas are given for the interior voltages appearing across bolted joints from exterior lightning currents. External slot and bolt inductances as well as internal slot and bolt diffusion effects are included. Both linear and ferromagnetic wall materials are considered. A useful simplification of the slot current distribution into linear stripline and cylindrical parts (near the bolts) allows the nonlinear voltages to be estimated in closed form.

  20. Leadership - Joint Center for Energy Storage Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Leadership George Crabtree George Crabtree, an Argonne National Laboratory Distinguished Fellow, is the Director of the Joint Center for Energy Storage Research. As JCESR Director, Crabtree directs the overall strategy and goals of the research program and operational plan, acts as liaison to executives of JCESR partner organizations, and represents JCESR with external constituencies and advisory committees. View Bio Venkat Srinivasan Venkat Srinivasan, JCESR Deputy Director, Research and

  1. Environmental Implementation Plan

    SciTech Connect (OSTI)

    Not Available

    1993-03-15

    The purpose of the Environmental Implementation Plan (EIP) is to show the current and future (five years) environmental plans from individual site organizations and divisions, as well as site environmental programs and initiatives which are designed to protect the environment and meet or exceed changing environmental/regulatory requirements. Communicating with site organizations, departments, and committees is essential in making the site's environmental-planning process work. The EIP gives the site the what, when, how, and why for environmental requirements. Through teamwork and proactive planning, a partnership for environmental excellence is formed to achieve the site vision for SRS to become the recognized model for Environmental Excellence in the Department of Energy's Nuclear Weapons Complex.

  2. Environmental Implementation Plan

    SciTech Connect (OSTI)

    Not Available

    1993-03-15

    The purpose of the Environmental Implementation Plan (EIP) is to show the current and future (five years) environmental plans from individual site organizations and divisions, as well as site environmental programs and initiatives which are designed to protect the environment and meet or exceed changing environmental/regulatory requirements. Communicating with site organizations, departments, and committees is essential in making the site`s environmental-planning process work. The EIP gives the site the what, when, how, and why for environmental requirements. Through teamwork and proactive planning, a partnership for environmental excellence is formed to achieve the site vision for SRS to become the recognized model for Environmental Excellence in the Department of Energy`s Nuclear Weapons Complex.

  3. DOE-EERC jointly sponsored research program

    SciTech Connect (OSTI)

    Hendrikson, J.G.; Sondreal, E.A.

    1999-09-01

    U.S. Department of Energy (DOE) Cooperative Agreement DE-FC21-93MC30098 funded through the Office of Fossil Energy and administered at the Federal Energy Technology Center (FETC) supported the performance of a Jointly Sponsored Research Program (JSRP) at the Energy and Environmental Research Center (EERC) with a minimum 50% nonfederal cost share to assist industry in commercializing and effectively applying efficient, nonpolluting energy technologies that can compete effectively in meeting market demands for clean fuels, chemical feedstocks, and electricity in the 21st century. The objective of the JSRP was to advance the deployment of advanced technologies for improving energy efficiency and environmental performance through jointly sponsored research on topics that would not be adequately addressed by the private sector alone. Examples of such topics include the barriers to hot-gas cleaning impeding the deployment of high-efficiency power systems and the search for practical means for sequestering CO{sub 2} generated by fossil fuel combustion. The selection of particular research projects was guided by a combination of DOE priorities and market needs, as provided by the requirement for joint venture funding approved both by DOE and the private sector sponsor. The research addressed many different energy resource and related environmental problems, with emphasis directed toward the EERC's historic lead mission in low-rank coals (LRCs), which represent approximately half of the U.S. coal resources in the conterminous states, much larger potential resources in Alaska, and a major part of the energy base in the former U.S.S.R., East Central Europe, and the Pacific Rim. The Base and JSRP agreements were tailored to the growing awareness of critical environmental issues, including water supply and quality, air toxics (e.g., mercury), fine respirable particulate matter (PM{sub 2.5}), and the goal of zero net CO{sub 2} emissions.

  4. Joint Center for Energy Storage Research

    SciTech Connect (OSTI)

    Eric Isaacs

    2012-11-30

    The Joint Center for Energy Storage Research (JCESR) is a major public-private research partnership that integrates U.S. Department of Energy national laboratories, major research universities and leading industrial companies to overcome critical scientific challenges and technical barriers, leading to the creation of breakthrough energy storage technologies. JCESR, centered at Argonne National Laboratory, outside of Chicago, consolidates decades of basic research experience that forms the foundation of innovative advanced battery technologies. The partnership has access to some of the world's leading battery researchers as well as scientific research facilities that are needed to develop energy storage materials that will revolutionize the way the United States and the world use energy.

  5. Safety Monitor Joint Working Group (JWG) Tour

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4 th Meeting of the Joint Working Group of the U.S.-Japan Coordinating Committee of Fusion Energy on Safety in Inter-Institutional Collaborations (U.S.-Japan Safety Monitoring Program) Meeting in Japan, July 29-August 2, 2013 Submitted: October 16, 2013 Respectfully submitted to: Barry Sullivan Program Manager - ES&H U.S. DOE - Office of Fusion Energy Sciences Professor Kiyohiko Nishimura Head of Division for Health and Safety Management National Institute for Fusion Science Prepared by: Lee

  6. Surface preparation of adhesively bonded joints

    SciTech Connect (OSTI)

    Hogg, I.C.; Janardhana, M.N.

    1993-12-31

    For the bonding of structures, it is essential that correct surface preparation is completed to ensure both a reliable and a durable bond. In a controlled environment this can be achieved easily, but difficulties can occur in the field. This paper is a compilation of research completed in the area of surface preparation for the bonding of aluminum and graphite epoxy composites. Finite element analysis software MSC/NASTRAN has been used to investigate the effect of adhesion on the strength and failure characteristics of a single lap joint.

  7. Joint Fuel Cell Bus Workshop Summary Report

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Joint Fuel Cell Bus Workshop Summary Report Prepared for: U.S. Department of Energy (DOE/EERE) U.S. Department of Transportation (DOT/FTA) Prepared by: Thomas G. Benjamin Argonne National Laboratory Kristen Nawoj Sentech, Inc. Donna Ho U.S. Department of Energy June 7, 2010 8:00 AM - 12:00 PM Washington Wardman Park Marriott Hotel Washington, DC News Alert distributed May 20, 2010 The U.S. Department of Energy (DOE) and the U.S. Department of Transportation (DOT) will hold a Fuel Cell Bus

  8. TRUPACT-1 implementation plan

    SciTech Connect (OSTI)

    Hurley, J.D.; Tappen, J.J. . Joint Integration Office); Christensen, D.S. )

    1985-09-01

    TRUPACT-1, the TRansUranic PACkage Transporter is a packaging designed to transport defense contact handled transuranic (CH-TRU) waste from generating and interim TRU waste storage facilities to the Waste Isolation Pilot Plant (WIPP). Prior to fabrication and procurement of a full fleet, an initial design (TRUPACT-1) will be introduced to the defense TRU waste complex through use in an operational prototype fleet which will consist of Units 1, 2, and 3. In an effort to provide a relatively smooth introduction of the TRUPACT-1, the TRUPACT Technical Team (TTT) has developed the following implementation plan. The plan provides detailed information on user handling opportunities, schedules, equipment, responsibilities, reporting and data collection activities to be performed. The intent of this document is to provide users of the TRUPACT-1 with a guidance document, complete with references, that will allow the smooth introduction of this new transportation system by providing the information necessary for collecting operational, performance and cost data. These data will be used in modeling and full fleet design and procurement activities. In addition, these data will help fine tune procedures in the inspection and maintenance document and the operational document. Additional objectives of this plan are to aid in the establishment of site operational, inspection and maintenance procedures as well as training of site operators and briefing state and local officials.

  9. Environmental Implementation Plan

    SciTech Connect (OSTI)

    Not Available

    1994-02-01

    The Environmental Implementation Plan (EIP) is a dynamic long-range environmental-protection plan for SRS. The EIP communicates the current and future (five year) environmental plans from individual organizations and divisions as well as site environmental initiatives which are designed to protect the environment and meet or exceed compliance with changing environmental/ regulatory requirements. Communication with all site organizations is essential for making the site environmental planning process work. Demonstrating environmental excellence is a high priority embodied in DOE and WSRC policy. Because of your support and participation in the three EIP initiatives; Reflections, Sectional Revision, and Integrated Planning, improvements are being made to the EIP and SRS environmental protection programs. I appreciate the ``Partnership in Environmental Excellence`` formed by the environmental coordinators and professionals who work daily toward our goal of compliance and environmental excellence. I look forward to seeing continued success and improvement in our environmental protection programs through combined efforts of all site organizations to protect our employees, the public health, and the environment. Together, we will achieve our site vision for SRS to be the recognized model for Environmental Excellence in the DOE Nuclear Weapons Complex.

  10. Distributed generation implementation guidelines

    SciTech Connect (OSTI)

    Guzy, L.; O`Sullivan, J.B.; Jacobs, K.; Major, W.

    1999-11-01

    The overall economics of a distributed generation project is based on cost elements which include: Equipment and financing, fuel, displaced electricity cost, operation and maintenance. Of critical importance is how the facility is managed, including adequate provision for a comprehensive operator training program. Proper equipment maintenance and fuel procurement policy will also lead to greater system availability and optimal system economics. Various utility tariffs are available which may be economically attractive, with an added benefit to the utility of providing a peak shaving resource during peak periods. Changing modes of operation of the distributed generation system may affect staff readiness, require retraining and could affect maintenance costs. The degree of control and oversight that is provided during a project`s implementation and construction phases will impact subsequent maintenance and operating costs. The long term effect of siting impacts, such as building facades that restrict turbine inlet airflow will affect subsequent operations and require supplemental maintenance action. It is possible to site a variety of distributed generation technologies in settings which vary from urban to remote unattended locations with successful results from both an economic and operational perspective.

  11. United States -Japan Joint Nuclear Energy Action Plan | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy -Japan Joint Nuclear Energy Action Plan United States -Japan Joint Nuclear Energy Action Plan President Bush of the United States and Prime Minister Koizumi of Japan have both stated their strong support for the contribution of nuclear power to energy security and the global environment. Japan was the first nation to endorse President Bush's Global Nuclear Energy Partnership. This describes a background of the partnership. United States -Japan Joint Nuclear Energy Action Plan (551.62

  12. Secretary Bodman, Director Rumyantsev Issue Joint Statement on Bratislava

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Nuclear Security Initiatives | Department of Energy Bodman, Director Rumyantsev Issue Joint Statement on Bratislava Nuclear Security Initiatives Secretary Bodman, Director Rumyantsev Issue Joint Statement on Bratislava Nuclear Security Initiatives November 9, 2005 - 2:20pm Addthis WASHINGTON, DC - U.S. Secretary of Energy Samuel Bodman and Russian Federal Atomic Energy Agency Director, Aleksandr Rumyantsev today released a joint statement on the status of the Bratislava Nuclear Security

  13. Development of the bus joint for the ITER Central Solenoid

    SciTech Connect (OSTI)

    Martovetsky, Nicolai N; Irick, David Kim; Kenney, Steven J

    2013-01-01

    The terminations of the Central Solenoid (CS) modules are connected to the bus extensions by joints located outside the CS in the gap between the CS and Torodial Field (TF) assemblies. These joints have very strict space limitations. Low resistance is a common requirement for all ITER joints. In addition, the CS bus joints will experience and must be designed to withstand significant variation in the magnetic field of several tenths of a Tesla per second during initiation of plasma. The joint resistance is specified to be less than 4 nOhm. The joints also have to be soldered in the field and designed with the possibility to be installed and dismantled in order to allow cold testing in the cold test facility. We have developed coaxial joints that meet these requirements and have demonstrated the feasibility to fabricate and assemble them in the vertical configuration. We introduced a coupling cylinder with superconducting strands soldered to the surface of the cable that can be installed in the ITER assembly hall and at the Cold Test Facility. This cylinder serves as a transition area between the CS module and the bus extension. We made two racetrack samples and tested four bus joints in our Joint Test Apparatus. Resistance of the bus joints was measured by a decay method and by a microvoltmeter; the value of the current was measured by the Hall probes. This measurement method was verified in the previous tests. The resistance of the joints varied insignificantly from 1.5 to 2 nOhm. One of the challenges associated with a soldered joint is the inability to use corrosive chemicals that are difficult to clean. This paper describes our development work on cable preparation, chrome removal, compaction, soldering, and final assembly and presents the test results.

  14. Science On Tap - From Trinity to Artificial Joints

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Science On Tap - From Trinity to Artificial Joints Science On Tap - From Trinity to Artificial Joints WHEN: Jul 16, 2015 5:30 PM - 7:00 PM WHERE: UnQuarked Wine Room 145 Central Park Square, Los Alamos, New Mexico 87544, USA SPEAKER: Nathaniel Morgan, Los Alamos National Laboratory CONTACT: Jessica Privette 505 667-0375 CATEGORY: Bradbury INTERNAL: Calendar Login Science on Tap series Event Description From Trinity to artificial joints: How computational mathematics has transformed our world.

  15. Joint Electromagnetic Pulse Resilience Strategy | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Electromagnetic Pulse Resilience Strategy Joint Electromagnetic Pulse Resilience Strategy The Joint Electromagnetic Pulse Resilience Strategy is a collaboration between the Department of Energy (DOE) and the Electric Power Research Institute (EPRI) that enhances coordination and guides future efforts to help meet the growing demands for electromagnetic pulse (EMP) guidance. The Joint Strategy lays out five strategic goals to guide DOE and EPRI to minimize EMP impacts and improve resilience: 1.

  16. Joint Fuel Cell Bus Workshop Summary Report | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Bus Workshop Summary Report Joint Fuel Cell Bus Workshop Summary Report Presentation at DOE & DOT Joint Fuel Cell Bus Workshop, June 7, 2010 buswksp10_summary.pdf (3.59 MB) More Documents & Publications HybriDrive Propulsion System Hydrogen and Fuel Cell Transit Bus Evaluations: Joint Evaluation Plan for the U.S. Department of Energy and the Federal Transit Administration; Appendix Fuel Cell Bus Workshop

  17. Joint Fuel Cell Technologies and Advanced Manufacturing Webinar |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Technologies and Advanced Manufacturing Webinar Joint Fuel Cell Technologies and Advanced Manufacturing Webinar Download the presentation slides from the "Joint Fuel Cell Technologies Office and Advanced Manufacturing Office Webinar" held November 20, 2012. Joint Fuel Cell Technologies Office and Advanced Manufacturing Office Webinar Slides (1.56 MB) More Documents & Publications Hydrogen and Fuel Cell Technologies FY 2014 Budget Request Rollout to

  18. Joint Meeting on Hydrogen Delivery Modeling and Analysis Meeting Agenda |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Agenda Joint Meeting on Hydrogen Delivery Modeling and Analysis Meeting Agenda Agenda for the Joint Meeting on Hydrogen Delivery Modeling and Analysis, May 8-9, 2007 deliv_analysis_agenda.pdf (77.66 KB) More Documents & Publications Hydrogen Delivery Analysis Models Hydrogen Delivery Analysis Plus Meeting: DTT, STT, HPTT, Other Analysts, Invited Guests Joint Meeting on Hydrogen Delivery Modeling and Analysis Meeting Attendees List

  19. Joint Meeting on Hydrogen Delivery Modeling and Analysis Meeting Attendees

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    List | Department of Energy Attendees List Joint Meeting on Hydrogen Delivery Modeling and Analysis Meeting Attendees List Attendee list from the Joint Meeting on Hydrogen Delivery Modeling and Analysis, May 8-9, 2007 deliv_analysis_attendees.pdf (77.35 KB) More Documents & Publications DOE and FreedomCAR and Fuel Partnership Analysis Workshop Joint Meeting on Hydrogen Delivery Modeling and Analysis Meeting Agenda DOE and FreedomCAR and Fuel Partnership Analysis Workshop

  20. Conduct of operations implementation plan

    SciTech Connect (OSTI)

    Anderson, C.K.; Hall, R.L.

    1991-02-20

    This implementation plan describes the process and provides information and schedules that are necessary to implement and comply with the Department of Energy (DOE) Order 5480.19, {open_quotes}Conduct of Operations{close_quotes} (CoOp). This plan applies to all Pinellas Plant operations and personnel. Generally, this Plan discusses how DOE Order 5480.19 will be implemented at the Pinellas Plant.

  1. HSE12 implementation in libxc

    Energy Science and Technology Software Center (OSTI)

    2013-05-13

    This piece of software is a new feature implemented inside an existing open-source library. Specifically, it is a new implementation of a density functional (HSE, short for Heyd-Scuseria-Ernzerhof) for a repository of density functionals, the libxc library. It fixes some numerical problems with existing implementations, as outlined in a scientific paper recently submitted for publication. Density functionals are components of electronic structure simulations, which model properties of electrons inside molecules and crystals.

  2. AUTHENTICATED SENSOR INTERFACE DEVICE FOR JOINT USE SAFEGUARDS APPLICATIONS - CONCEPTS AND CHALLENGES

    SciTech Connect (OSTI)

    Poland, R.; Drayer, R.; Wilson, J.

    2013-08-12

    This paper will discuss the key features of the Authenticated Sensor Interface Device that collectively provide the ability to share data among a number of parties while ensuring the authentication of data and protecting both the operator’s and the IAEA’s interests. The paper will also discuss the development of the prototype, the initial testing with an accountancy scale, and future plans and challenges to implementation into the joint use and remote monitoring applications. As nuclear fuel cycle technology becomes more prevalent throughout the world and the capacity of plants increases, limited resources of the IAEA are being stretched near a breaking point. A strategy is to increase efficiency in safeguards monitoring using “joint use” equipment that will provide the facility operator process data while also providing the IAEA key safeguards data. The data, however, must be authenticated and validated to ensure the data have not been tampered with. The Authenticated Sensor Interface Device provides the capability to share data and can be a valuable component in the IAEA’s ability to collect accountancy data from scales in Uranium conversion and enrichment plants, as well as nuclear fuel fabrication plants. Likewise, the Authenticated Sensor Interface Device can be configured to accept a diverse array of input signals, ranging from analog voltage, to current, to digital interfaces and more. These modular capabilities provide the ability to collect authenticated, joint-use, data streams from various process monitoring sensors.

  3. Comparison of Joint Modeling Approaches Including Eulerian Sliding...

    Office of Scientific and Technical Information (OSTI)

    Eulerian Sliding Interfaces Citation Details In-Document Search Title: Comparison of Joint Modeling Approaches Including Eulerian Sliding Interfaces You are accessing a ...

  4. Equivalent Continuum Modeling for Shock Wave Propagation in Jointed...

    Office of Scientific and Technical Information (OSTI)

    In one approach, jointed are modeled explicitly in a Lagrangian framework with appropriate contact algorithms used to track motion along the interfaces. In the other approach, the ...

  5. Comparison of Joint Modeling Approaches Including Eulerian Sliding...

    Office of Scientific and Technical Information (OSTI)

    However, once slip displacement on the joints become comparable to the zone size, Lagrangian (even non-conforming) meshes could suffer from tangling and decreased time step ...

  6. Forces in bolted joints: analysis methods and test results utilized...

    Office of Scientific and Technical Information (OSTI)

    nuclear core applications (LWBR Development Program) Citation Details In-Document Search Title: Forces in bolted joints: analysis methods and test results utilized for nuclear ...

  7. New Report Describes Joint Opportunities for Natural Gas and...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Describes Joint Opportunities for Natural Gas and Hydrogen Fuel-Cell Vehicle Markets - Sandia ... Thorough system requirements & cost assessments are needed to quantify the benefits ...

  8. Equivalent Continuum Modeling for Shock Wave Propagation in Jointed...

    Office of Scientific and Technical Information (OSTI)

    Equivalent Continuum Modeling for Shock Wave Propagation in Jointed Media Citation Details In-Document Search Title: Equivalent Continuum Modeling for Shock Wave Propagation in ...

  9. Joint transmission system projects to improve system reliability

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    County PUD, 425-783-8444 Joint transmission system projects to improve system reliability First major regional electric grid improvements in decades prepare the area for the...

  10. Stochastic Joint Inversion for Integrated Data Interpretation in Geothermal Exploration

    Broader source: Energy.gov [DOE]

    Stochastic Joint Inversion for Integrated Data Interpretation in Geothermal Exploration presentation at the April 2013 peer review meeting held in Denver, Colorado.

  11. Joint NSRC Workshop 2015: Big, Deep, and Smart Data Analytics...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NSRC Workshop 2015 Joint NSRC Workshop 2015: Big, Deep, and Smart Data Analytics in Materials Imaging Home Announcement Meeting REGISTRATION Call for Abstracts Abstract Submission...

  12. Hydrogen and Fuel Cell Transit Bus Evaluations: Joint Evaluation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Administration; Appendix Hydrogen and Fuel Cell Transit Bus Evaluations: Joint Evaluation Plan for the U.S. Department of Energy and the Federal Transit Administration; Appendix ...

  13. United States -Japan Joint Nuclear Energy Action Plan

    Broader source: Energy.gov (indexed) [DOE]

    -Japan Joint Nuclear Energy Action Plan 1. Introduction 1.1 Background and Objective ... for the contribution of nuclear power to energy security and the global environment. ...

  14. Hydrogen and Fuel Cell Transit Bus Evaluations: Joint Evaluation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Administration Hydrogen and Fuel Cell Transit Bus Evaluations: Joint Evaluation Plan for the U.S. Department of Energy and the Federal Transit Administration This document ...

  15. El Salvador-Joint Programme on Resource Efficient and Cleaner...

    Open Energy Info (EERE)

    (RECP) in Developing and Transition Countries Jump to: navigation, search Name El Salvador-Joint Programme on Resource Efficient and Cleaner Production (RECP) in Developing and...

  16. Transcript of March 4, 2011 Joint Public Meeting | Department...

    Broader source: Energy.gov (indexed) [DOE]

    of March 4, 2011 Joint Public Meeting More Documents & Publications CERTIFICATE OF AUTHENTICITY Office of Information Resources U.S. Offshore Wind Advanced Technology...

  17. Science On Tap - From Trinity to Artificial Joints

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    artificial human joints, and biological implants, using MRI scanning software, radiation therapy and even creating cartoons is all done using computational mathematics. The world...

  18. ORISE: Providing Support to the DOE Joint Information Center

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Joint Information Center (JIC) ORISE supports DOE's Oak Ridge Office by managing crisis communication facility for drills, exercises and emergencies In the event of an emergency,...

  19. Berkeley India Joint Leadership on Energy and Environment | Open...

    Open Energy Info (EERE)

    of pathways and approaches for reducing the emissions of greenhouse gases while pursuing sustainable economic development. The Berkeley India Joint Leadership on Energy and...

  20. Montana Joint Application for Proposed Work in Montana's Streams...

    Open Energy Info (EERE)

    Notice Form Topic JOINT APPLICATION FOR PROPOSED WORK IN MONTANA'S STREAMS, WETLANDS, FLOODPLAINS, AND OTHER WATER BODIES Organization Montana Department of Natural...

  1. US - Brazil Binational Energy Working Group Joint Action Plan...

    Broader source: Energy.gov (indexed) [DOE]

    brazilactionplan7202010.pdf More Documents & Publications U.S.-Brazil Binational Joint Action Plan Webtrends Archives by Fiscal Year - International Activities EIS-0309: Record...

  2. Joint Motion to Intervene of Northern States Power Company (Minnesota...

    Energy Savers [EERE]

    States Power Company (Minnesota) et al. on the Proposed Open Access Requirements Joint Motion to Intervene of Northern States Power Company (Minnesota) et al. on the Proposed ...

  3. Joint BioEnergy Institute (Other) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    JOINT BIOENERGY INSTITUTE; JBEI; GENOMICS; SYSTEMS BIOLOGY; SUGAR; FUEL SYNTHESIS; SWITCH GRASS Word Cloud More Like This Multimedia File size NAView Multimedia View Multimedia

  4. Research Highlights - Joint Center for Energy Storage Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the possibility of future optimization of functional K-doping in carbon cathode materials. ... Strategy of the Joint Center for Energy Storage Research to Influence Laboratory Safety ...

  5. Joint Genome Institute Progress Report 2002-2005

    SciTech Connect (OSTI)

    Gilbert, David

    2005-10-03

    Progress report covering activities at the DOE-Joint Genome Institute in Walnut Creek, California for the period 2002-2005.

  6. Launch implementation | Open Energy Information

    Open Energy Info (EERE)

    Launch implementation Jump to: navigation, search Stage 4 LEDS Home Introduction to Framework Assess current country plans, policies, practices, and capacities DevelopBAU Stage 4:...

  7. Implementation Standing Technical Committee Presentation

    Broader source: Energy.gov [DOE]

    This presentation outlines the goals of the Implementation Standing Technical Committee, as presented at the Building America Spring 2012 Stakeholder meeting on February 29, 2012, in Austin, Texas.

  8. Financing Program Implementation Process Flow

    Broader source: Energy.gov [DOE]

    The implementation process flow for financing with two models: a generic option for primary markets and a conceptual option for secondary markets.

  9. CASL - Implementing Integrated Steam Tables

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    implementation, and interpolation package codes have been approved for release as open source software. They will be made available in future for download at http:...

  10. Joint Institute for Nanoscience Annual Report 2004

    SciTech Connect (OSTI)

    Baer, Donald R.; Campbell, Charles

    2005-02-01

    Due to the inherently interdisciplinary nature of nanoscience and nanotechnology, research in this arena is often significantly enhanced through creative cooperative activities. The Joint Institute for Nanoscience (JIN) is a venture of the University of Washington (UW) and Pacific Northwest National Laboratory (PNNL) to encourage and enhance high impact and high quality nanoscience and nanotechnology research that leverages the strengths and capabilities of both institutions, and to facilitate education in these areas. This report summarizes JIN award activities that took place during fiscal year 2004 and provides a historical list of JIN awardees, their resulting publications, and JIN-related meetings. Major portions of the JIN efforts and resources are dedicated to funding graduate students and postdoctoral research associates to perform research in collaborations jointly directed by PNNL staff scientists and UW professors. JIN fellowships are awarded on the basis of applications that include research proposals. They have been very successful in expanding collaborations between PNNL and UW, which have led to many excellent joint publications and presentations and enhanced the competitiveness of both institutions for external grant funding. JIN-based interactions are playing a significant role in creating new research directions and reshaping existing research programs at both the UW and PNNL. The JIN also co-sponsors workshops on Nanoscale Science and Technology, four of which have been held in Seattle and one in Richland. In addition to involving PNNL staff in various UW nanoscience courses and seminars, a National Science Foundation grant, Development of UW-PNL Collaborative Curriculums in Nano-Science and Technology, has allowed the development of three intensive short courses that are taught by UW faculty, PNNL staff, and faculty from other institutions, including Washington State University, the University of Idaho, Stanford University, and the University of

  11. Jointly Sponsored Research Program Energy Related Research

    SciTech Connect (OSTI)

    Western Research Institute

    2009-03-31

    Cooperative Agreement, DE-FC26-98FT40323, Jointly Sponsored Research (JSR) Program at Western Research Institute (WRI) began in 1998. Over the course of the Program, a total of seventy-seven tasks were proposed utilizing a total of $23,202,579 in USDOE funds. Against this funding, cosponsors committed $26,557,649 in private funds to produce a program valued at $49,760,228. The goal of the Jointly Sponsored Research Program was to develop or assist in the development of innovative technology solutions that will: (1) Increase the production of United States energy resources - coal, natural gas, oil, and renewable energy resources; (2) Enhance the competitiveness of United States energy technologies in international markets and assist in technology transfer; (3) Reduce the nation's dependence on foreign energy supplies and strengthen both the United States and regional economies; and (4) Minimize environmental impacts of energy production and utilization. Under the JSR Program, energy-related tasks emphasized enhanced oil recovery, heavy oil upgrading and characterization, coal beneficiation and upgrading, coal combustion systems development including oxy-combustion, emissions monitoring and abatement, coal gasification technologies including gas clean-up and conditioning, hydrogen and liquid fuels production, coal-bed methane recovery, and the development of technologies for the utilization of renewable energy resources. Environmental-related activities emphasized cleaning contaminated soils and waters, processing of oily wastes, mitigating acid mine drainage, and demonstrating uses for solid waste from clean coal technologies, and other advanced coal-based systems. Technology enhancement activities included resource characterization studies, development of improved methods, monitors and sensors. In general the goals of the tasks proposed were to enhance competitiveness of U.S. technology, increase production of domestic resources, and reduce environmental impacts

  12. Joint Institute for Nanoscience Annual Report 2003

    SciTech Connect (OSTI)

    Baer, Donald R.; Campbell, Charles

    2004-02-01

    The Joint Institute for Nanoscience (JIN) is a cooperative venture of the University of Washington and Pacific Northwest National Laboratory to encourage and enhance high-impact and high-quality nanoscience and nanotechnology of all types. This first annual report for the JIN summarizes activities beginning in 2001 and ending at the close of fiscal year 2003 and therefore represents somewhat less than two years of activities. Major portions of the JIN resources are dedicated to funding graduate students and postdoctoral research associates to perform research in collaborations jointly directed by Pacific Northwest National Laboratory (PNNL) staff scientists and University of Washington (UW) professors. These fellowships were awarded on the basis of applications that included research proposals. JIN co-sponsors an annual Nanoscale Science and Technology Workshop held in Seattle. In addition to involving PNNL staff in various UW nanoscience courses and seminars, a National Science Foundation grant Development of UW-PNL Collaborative Curriculums in Nano-Science and Technology has allowed the development of three intensive short courses that are taught by UW faculty, PNNL staff, and faculty from other institutions, including Washington State University, the University of Idaho, Stanford University, and the University of Alaska. The initial JIN agreement recognized that expansion of cooperation beyond UW and PNNL would be highly valuable. Starting in early 2003, efforts were initiated to form a regional communication link called the Northwest Nanoscience and Nanotechnology Network (Nâ‚„). In concept, Nâ‚„ is a tool to encourage communication and help identify regional resources and nanoscience and technology activities.

  13. Audit Implementation Design Plan | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Audit Implementation Design Plan Document Number: NA Effective Date: 08

  14. EM's Acting Assistant Secretary Selected to Lead Joint Convention

    Broader source: Energy.gov [DOE]

    The Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management (Joint Convention) selected David Huizenga, Acting Assistant Secretary for the Office of Environmental Management, as the President for the Fifth Review Meeting of the Parties.

  15. Joint Working Group for Fusion Safety | Princeton Plasma Physics Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Business Operations Careers/ Human Resources Directory Diversity and Inclusion Environment, Safety & Health Environmental Management System Joint Working Group for Fusion Safety Furth Plasma Physics Library Lab Leadership Organization Chart Technology Transfer Contact Us Business Operations Careers/ Human Resources Directory Diversity and Inclusion Environment, Safety & Health Environmental Management System Joint Working Group for Fusion Safety Furth Plasma Physics Library Lab

  16. Guiding Principles for Successfully Implementing Industrial Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Guiding Principles for Successfully Implementing Industrial Energy Assessment Recommendations Guiding Principles for Successfully Implementing Industrial Energy Assessment ...

  17. Energy Sector Cybersecurity Framework Implementation Guidance

    Broader source: Energy.gov (indexed) [DOE]

    FOR PUBLIC COMMENT SEPTEMBER, 2014 ENERGY SECTOR CYBERSECURITY FRAMEWORK IMPLEMENTATION GUIDANCE Energy Sector Cybersecurity Framework Implementation Guidance Table of Contents...

  18. Departmental Personnel Security - Implementation Guidance | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Departmental Personnel Security - Implementation Guidance Implementation Guidance Overview of Security ClearanceAccess Authorization Process for Applicants Drug Testing ...

  19. Inelastic analysis of dissimilar metallic pipe joints for CRBRP application

    SciTech Connect (OSTI)

    Yang, C C; Dalcher, A W

    1982-01-19

    A preliminary inelastic analysis of a dissimilar metallic transition joint was made based on the piping design specification for CRBRP applications. The transition joint was analyzed to satisfy the elevated temperature ASME Code requirements. The transition joint analyzed is a tri-metallic joint composed of 316 stainless steel, alloy 800H, and 2-1/4 Cr-1Mo steel sections. The preliminary results from this analysis showed that the plastic deformation occurs predominantly in the alloy 800H section, while the accumulated inelastic strain due to creep is much more significant in the 2-1/4 Cr-1Mo section. The region of this transition joint which experiences the greatest amount of accumulated damage is at the interface of the 2-1/4 Cr-1Mo steel and the Inconel 82 weldment.

  20. Development of the Butt Joint for the ITER Central Solenoid

    SciTech Connect (OSTI)

    Martovetsky, N N

    2006-08-23

    The ITER Central Solenoid (CS) requires compact and reliable joints for its Cable-in-Conduit Conductor (CICC). The baseline design is a diffusion bonded butt joint. In such a joint the mating cables are compacted to a very low void fraction in a copper sleeve and then heat treated. After the heat treatment the ends are cut, polished and aligned against each other and then diffusion bonded under high compression in a vacuum chamber at 750 C. The jacket is then welded on the conductor to complete the joint, which remarkably does not require more room than a regular conductor. This joint design is based on a proven concept developed for the ITER CS Model Coil that was successfully tested in the previous R&D phase.

  1. Providing Resources for Implementation | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Resources for Implementation Providing Resources for Implementation This presentation discusses the resources needed to prepare for implementing an energy efficiency project and provides suggestions for developing internal resources and seeking external ones. Providing Resources for Implementation (May 12, 2010) (907 KB) More Documents & Publications Creating a Climate for Successful Project Implementation Preparing for Project Implementation Assigning Accountability for Each Project, April

  2. Implementation Plan Synopsis Directive Number, Title Summary of Implementation Plan:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Services » Earned Value Management » Implemenation Guidance Implemenation Guidance Earned Value Management (EVM) is a systematic approach to the integration and measurement of cost, schedule, and technical (scope) accomplishments on a project or task. Following established implementation guidelines and conducting periodic surveillance of implemented EVM System (EVMS) will ensure that both the government and contractors have the ability to examine detailed schedule information, critical program

  3. EERE Multinational Partnerships and Projects | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Multinational Partnerships and Projects EERE Multinational Partnerships and Projects The Office of Energy Efficiency and Renewable Energy (EERE) plays a key role in a number of multinational energy relationships. Click on the links below to jump to the respective section. Clean Energy Ministerial International Partnership for Energy Efficiency Cooperation (IPEEC) International Renewable Energy Agency (IRENA) International Energy Agency (IEA) Working Groups and Implementing Agreements

  4. CRAD, NNSA- ISMS Implementation (FRAM)

    Broader source: Energy.gov [DOE]

    CRAD for ISMS Implementation (FRAM). Criteria Review and Approach Documents (CRADs) that can be used to conduct a well-organized and thorough assessment of elements of safety and health programs.

  5. CRAD, NNSA- ISMS Implementation (Contracts)

    Broader source: Energy.gov [DOE]

    CRAD for ISMS Implementation (Contracts). Criteria Review and Approach Documents (CRADs) that can be used to conduct a well-organized and thorough assessment of elements of safety and health programs.

  6. Park Implementation | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    History » Manhattan Project National Historical Park » Park Implementation Park Implementation NPS Director Jonathan Jarvis and Secretary of Energy Ernest Moniz Stay up to date on progress towards our nation's newest national park. February 11-12, 2016 NPS and DOE participants in the Foundation Workshops meet in Denver, Colorado, to assess the workshop findings, develop interpretive themes for the park, and discuss next steps. February 1-9, 2016 The NPS in coordination with DOE holds

  7. Remote controlled vacuum joint closure mechanism

    DOE Patents [OSTI]

    Doll, David W. (San Diego, CA); Hager, E. Randolph (La Jolla, CA)

    1986-01-01

    A remotely operable and maintainable vacuum joint closure mechanism for a noncircular aperture is disclosed. The closure mechanism includes an extendible bellows coupled at one end to a noncircular duct and at its other end to a flange assembly having sealed grooves for establishing a high vacuum seal with the abutting surface of a facing flange which includes an aperture forming part of the system to be evacuated. A plurality of generally linear arrangements of pivotally coupled linkages and piston combinations are mounted around the outer surface of the duct and aligned along the length thereof. Each of the piston/linkage assemblies is adapted to engage the flange assembly by means of a respective piston and is further coupled to a remote controlled piston drive shaft to permit each of the linkages positioned on a respective flat outer surface of the duct to simultaneously and uniformly displace a corresponding piston and the flange assembly with which it is in contact along the length of the duct in extending the bellows to provide a high vacuum seal between the movable flange and the facing flange. A plurality of latch mechanisms are also pivotally mounted on the outside of the duct. A first end of each of the latch mechanisms is coupled to a remotely controlled latch control shaft for displacing the latch mechanism about its pivot point. In response to the pivoting displacement of the latch mechanism, a second end thereof is displaced so as to securely engage the facing flange.

  8. Fact Sheet: United States-Japan Joint Nuclear Energy Action Plan...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    United States-Japan Joint Nuclear Energy Action Plan Fact Sheet: United States-Japan Joint Nuclear Energy Action Plan PDF icon Fact Sheet: United States-Japan Joint Nuclear Energy ...

  9. Proceedings of the Third International Workshop on Jointed Structures.

    SciTech Connect (OSTI)

    Starr, Michael James; Brake, Matthew Robert; Segalman, Daniel Joseph; Bergman, Lawrence A.; Ewins, David J.

    2013-08-01

    The Third International Workshop on Jointed Structures was held from August 16th to 17th, 2012, in Chicago Illinois, following the ASME 2012 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. Thirty two researchers from both the United States and international locations convened to discuss the recent progress of mechanical joints related research and associated efforts in addition to developing a roadmap for the challenges to be addressed over the next five to ten years. These proceedings from the workshop include the minutes of the discussions and follow up from the 2009 workshop [1], presentations, and outcomes of the workshop. Specifically, twelve challenges were formulated from the discussions at the workshop, which focus on developing a better understanding of uncertainty and variability in jointed structures, incorporating high fidelity models of joints in simulations that are tractable/efficient, motivating a new generation of researchers and funding agents as to the importance of joint mechanics research, and developing new insights into the physical phenomena that give rise to energy dissipation in jointed structures. The ultimate goal of these research efforts is to develop a predictive model of joint mechanics.

  10. Microstructural characterization of titanium to 304 stainless steel brazed joints

    SciTech Connect (OSTI)

    Camargo, P.R.C.; Liu, S. . Center for Welding and Joining Research); Trevisan, R.E. . Dept. of Fabrication Engineering)

    1993-12-01

    The formation of intermetallic compounds in brazed joints between titanium and 304 stainless steel is of major concern, since they considerably degrade the joint properties. This research examined the vacuum brazing of commercially pure titanium to 304 stainless steel using two different silver-copper brazing filler metals. Pure copper and silver were used to prepare the brazing filler metals in these experiments. Special attention was given to the characterization of the different phases formed at the brazed joint and the effect of the intermetallic compounds on the mechanical properties of the brazed joints. Light and electron microscopy, electron probe microanalysis, microhardness, and shear testing were used to support the investigation. From the mechanical properties point of view, brazed joints using an eutectic composition filler metal (Ag-28 wt-% Cu) proved to be superior compared to the joints prepared with a filler metal of composition Ag-46 wt-% Cu. To maximize the shear strength of the joint, the brazing time must be optimized such that interfacial reactions, titanium-iron intermetallics formation are minimized.

  11. Measurement of joint kinematics using a conventional clinical single-perspective flat-panel radiography system

    SciTech Connect (OSTI)

    Seslija, Petar; Teeter, Matthew G.; Yuan Xunhua; Naudie, Douglas D. R.; Bourne, Robert B.; MacDonald, Steven J.; Peters, Terry M.; Holdsworth, David W.

    2012-10-15

    Purpose: The ability to accurately measure joint kinematics is an important tool in studying both normal joint function and pathologies associated with injury and disease. The purpose of this study is to evaluate the efficacy, accuracy, precision, and clinical safety of measuring 3D joint motion using a conventional flat-panel radiography system prior to its application in an in vivo study. Methods: An automated, image-based tracking algorithm was implemented to measure the three-dimensional pose of a sparse object from a two-dimensional radiographic projection. The algorithm was tested to determine its efficiency and failure rate, defined as the number of image frames where automated tracking failed, or required user intervention. The accuracy and precision of measuring three-dimensional motion were assessed using a robotic controlled, tibiofemoral knee phantom programmed to mimic a subject with a total knee replacement performing a stair ascent activity. Accuracy was assessed by comparing the measurements of the single-plane radiographic tracking technique to those of an optical tracking system, and quantified by the measurement discrepancy between the two systems using the Bland-Altman technique. Precision was assessed through a series of repeated measurements of the tibiofemoral kinematics, and was quantified using the across-trial deviations of the repeated kinematic measurements. The safety of the imaging procedure was assessed by measuring the effective dose of ionizing radiation associated with the x-ray exposures, and analyzing its relative risk to a human subject. Results: The automated tracking algorithm displayed a failure rate of 2% and achieved an average computational throughput of 8 image frames/s. Mean differences between the radiographic and optical measurements for translations and rotations were less than 0.08 mm and 0.07 Degree-Sign in-plane, and 0.24 mm and 0.6 Degree-Sign out-of-plane. The repeatability of kinematics measurements performed

  12. Ultrasonic inspection of polyethylene butt-fussion joints

    SciTech Connect (OSTI)

    House, L.J.; Day, R.A.

    1982-01-01

    Researchers investigated nondestructive pulse-echo, pitch-catch, and spectroscopic ultrasonic methods for determining voids and inclusions, lack of bond, and inadequate fusion in heat-fused polyethylene butt joints in 4-in. gas distribution pipe. The pulse-echo method, using a 2.25-MHz, cylindrically focused transducer, provided the best sensitivity to the joint defects, detecting flaws as small as 0.014 in. in diameter. No correlation was established between the ultrasonic spectroscopy results and the cohesive strength of incompletely fused joints in the 1.2-3.2 MHz frequency range.

  13. Introduction to Using NERSC for the Joint Genome Institute

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NERSC Introduction to Using NERSC for the Joint Genome Institute May 2, 2011 jgi logo sm NERSC Training Event 1:00-5:00 p.m. PDT May 2, 2011 Joint Genome Institute, 2800 Mitchell Drive, Walnut Creek, CA Introduction to Using NERSC Richard Gerber, NERSC User Services Group Shane Canon, NERSC Technology Integration Group This half-day training will enable new users from the Joint Genome Institute to get connected and running jobs at NERSC. We will cover NERSC computational and storage systems,

  14. Joint NERSC/OLCF/NICS Cray XT5 Workshop

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Events » Joint NERSC/OLCF/NICS Cray XT5 Workshop Joint NERSC/OLCF/NICS Cray XT5 Workshop February 1, 2010 February 1-3, 2010 Berkeley, CA The Joint Cray XT5 Workshop is designed to provide an in-depth introduction to using the world's newest and largest Cray XT5 systems. Representatives and staff from the National Energy Research Scientific Computing Center, the Oak Ridge Leadership Computing Facility, the National Institute for Computational Science, Cray, and AMD will explain how to use XT5

  15. Final Joint Statement from G-7 Energy Ministers Meeting in Rome...

    Broader source: Energy.gov (indexed) [DOE]

    Final Joint Statement from G-7 Energy Ministers Meeting in Rome More Documents & Publications Final Joint Statement from G-7 Energy Ministers Meeting in Rome Before the Senate...

  16. Energy Department Announces Selections for U.S.-India Joint Clean...

    Office of Environmental Management (EM)

    Selections for U.S.-India Joint Clean Energy Research and Development Center Energy Department Announces Selections for U.S.-India Joint Clean Energy Research and Development ...

  17. Time-lapse Joint Inversion of Geophysical Data and its Applications...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Time-lapse Joint Inversion of Geophysical Data and its Applications to Geothermal Prospecting Time-lapse Joint Inversion of Geophysical Data and its Applications to Geothermal ...

  18. JOINT EPA/DOE STATEMENT: Radiation Monitors Confirm That No Radiation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    JOINT EPADOE STATEMENT: Radiation Monitors Confirm That No Radiation Levels of Concern Have Reached the United States JOINT EPADOE STATEMENT: Radiation Monitors Confirm That No ...

  19. Data Needs for LCLS-II Amedeo Perazzo SLAC Joint Facilities User...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Amedeo Perazzo SLAC Joint Facilities User Forum on Data Intensive Computing, June 16 th 2014 Joint Facilities User Forum on Data Intensive Computing - LCLS-II Data Needs ...

  20. Remote controlled vacuum joint closure mechanism

    DOE Patents [OSTI]

    Doll, D.W.; Hager, E.R.

    1984-02-22

    A remotely operable and maintainable vacuum joint closure mechanism for a noncircular aperture is disclosed. The closure mechanism includes an extendible bellows coupled at one end to a noncircular duct and at its other end to a flange assembly having sealed grooves for establishing a high vacuum seal with the abutting surface of a facing flange which includes an aperture forming part of the system to be evacuated. A plurality of generally linear arrangements of pivotally coupled linkages and piston combinations are mounted around the outer surface of the duct and aligned along the length thereof. Each of the piston/linkage assemblies is adapted to engage the flange assembly by means of a respective piston and is further coupled to a remote controlled piston drive shaft to permit each of the linkages positioned on a respective flat outer surface of the duct to simultaneously and uniformly displace a corresponding piston and the flange assembly with which it is in contact along the length of the duct in extending the bellows to provide a high vacuum seal between the movable flange and the facing flange. A plurality of latch mechanisms are also pivotally mounted on the outside of the duct. A first end of each of the latch mechanisms is coupled to a remotely controlled latch control shaft for displacing the latch mechanism about its pivot point. In response to the pivoting displacement of the latch mechanism, a second end thereof is displaced so as to securely engage the facing flange and maintain the high vacuum seal established by the displacement of the flange assembly and extension of the bellows without displacing the entire duct.

  1. Guiding Principles for Successfully Implementing Industrial Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Assessment Recommendations | Department of Energy Guiding Principles for Successfully Implementing Industrial Energy Assessment Recommendations Guiding Principles for Successfully Implementing Industrial Energy Assessment Recommendations This implementation guide provides key principles and activities that will lead to the successful implementation of recommendations during energy assessments. Implementation Guidebook (April 2011) (7.11 MB) More Documents & Publications Unveiling the

  2. Unveiling the Implementation Guide | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Unveiling the Implementation Guide Unveiling the Implementation Guide This presentation addresses the implementation guide and features a best practice presentation from Raytheon. Unveiling the Implementation Guide (October 11, 2011) (2.27 MB) More Documents & Publications Energy Assessments Guiding Principles for Successfully Implementing Industrial Energy Assessment Recommendations Building America Technology Solutions for New and Existing Homes: Foundation Heat Exchanger, Oak Ridge,

  3. Mechanical properties of dissimilar metal joints composed of...

    Office of Scientific and Technical Information (OSTI)

    composed of DP 980 Steel and AA 7075-T6 Citation Details In-Document Search Title: Mechanical properties of dissimilar metal joints composed of DP 980 Steel and AA 7075-T6 A ...

  4. Seismic Capacity of Threaded, Brazed, and Grooved Pipe Joints

    Office of Environmental Management (EM)

    joints * 4 tests o Brazed (copper) * 4 tests Grooved Couplings o Catalog items o ASTM A106 Grade B piping o ASTM A 536 couplings o Lateral deflections imposed well above...

  5. United States -- Mexican joint ventures: A case history approach

    SciTech Connect (OSTI)

    Moore, N.L.; Chidester, R.J.; Hughes, K.R.; Fowler, R.A.

    1993-03-01

    Because the Mexican government has encouraged investment in Mexico by increasing the percentage of ownership of a Mexican business that a US company can hold, joint ventures are more attractive now than they had been in the past. This study provides preliminary information for US renewable energy companies who are interested in forming a joint venture with a Mexican company. This report is not intended to be a complete reference but does identifies a number of important factors that should be observed when forming a Mexican joint venture: (1)Successful joint ventures achieve the goals of each partner. (2)It is essential that all parties agree to the allocation of responsibilities. (3)Put everything in writing. (4)Research in depth the country or countries in which you are considering doing business.

  6. David Willets Visits JCESR - Joint Center for Energy Storage Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    19, 2014, Videos David Willets Visits JCESR willets-audio UK Universities and Science Minister, David Willetts, visited Argonne National Laboratory and the Joint Center for Energy Storage Research (JCESR).

  7. Statement from Secretary Moniz on Adoption Day for the Joint...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    in nature. Today, as the Joint Comprehensive Plan of Action (JCPOA) comes into effect, Iran will begin taking substantial and verifiable steps to roll back its nuclear program and...

  8. Gas turbine igniter with ball-joint support

    SciTech Connect (OSTI)

    Steber, C.E.; Travis, R.J.; Rizzo, J.A.

    1990-02-27

    This patent describes a support for an igniter for a combustor of a gas turbine, the combustor being of a type including a casing and a liner within the casing. It comprises: a ball joint; means for supporting the ball joint disposed a substantial distance outward from the casing; a body section of the igniter affixed in the ball joint; means for permitting the ball joint, and the body section to rotate through a substantial range; an igniter tip on the body section; and a hole in the liner. The igniter tip entering through the hole and into an interior of the liner. The hole being a tight fit to the igniter tip, whereby leakage past the igniter tip through the hole is limited. The substantial range being sufficient to permit fitting the igniter tip in the hole in the presence of manufacturing tolerances, and to permit the igniter tip to track the hole in the presence of differential thermal expansion during operation.

  9. Scanned_Joint_Declaration_(English).pdf | Department of Energy

    Office of Environmental Management (EM)

    The People's Republic of China, India and The Republic of Korea (June 2008) Joint Statement by Energy Ministers of G8, The People's Republic of China, India and The Republic of ...

  10. Joint comments of consumers energy company and the detriot edison...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    the Northeast Power Coordinating Council FE Docket No. 99-1 Joint Motion to Intervene of Northern States Power Company (Minnesota) et al. on the Proposed Open Access Requirements