Powered by Deep Web Technologies
Note: This page contains sample records for the topic "iowa powder atomization" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Iowa Powder Atomization Technologies  

SciTech Connect (OSTI)

The same atomization effect seen in a fuel injector is being applied to titanium metal resulting in fine titanium powders that are less than half the width of a human hair. Titanium melts above 3,000°F and is highly corrosive therefore requiring specialized containers. The liquid titanium is poured through an Ames Laboratory - USDOE patented tube which is intended to increase the energy efficiency of the atomization process, which has the ability to dramatically decrease the cost of fine titanium powders. This novel process could open markets for green manufacturing of titanium components from jet engines to biomedical implants.

None

2012-01-01T23:59:59.000Z

2

Iowa Powder Atomization Technologies  

ScienceCinema (OSTI)

The same atomization effect seen in a fuel injector is being applied to titanium metal resulting in fine titanium powders that are less than half the width of a human hair. Titanium melts above 3,000°F and is highly corrosive therefore requiring specialized containers. The liquid titanium is poured through an Ames Laboratory - USDOE patented tube which is intended to increase the energy efficiency of the atomization process, which has the ability to dramatically decrease the cost of fine titanium powders. This novel process could open markets for green manufacturing of titanium components from jet engines to biomedical implants.

None

2013-03-01T23:59:59.000Z

3

Iowa Powder Atomization Technologies, Inc. | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

complex parts very efficiently. Metal powders are mixed with a low melting plastic and injected into reusable molds, the plastic is then removed and the remaining...

4

Iowa Powder Atomization Technologies, Inc. | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

is developing a low-cost, advanced lithium-ion battery that employs a novel silicon graphene composite material that will substantially improve battery cycle life. When combined...

5

Iowa Powder Atomization Technologies, Inc. | Department of Energy  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsingFunInfrared LandResponsesIon/Surface Reactions and IonEnergyIons shed water

6

Characterization of Cu{sub 6}Sn{sub 5} intermetallic powders produced by water atomization and powder heat treatment  

SciTech Connect (OSTI)

Since the Cu{sub 6}Sn{sub 5} intermetallic shows its importance in industrial applications, the Cu{sub 6}Sn{sub 5} intermetallic-containing powders, produced by a powder processing route with a high production rate, were characterized. The route consisted of water atomization of an alloy melt (Cu–61 wt.% Sn) and subsequent heat treatment of the water-atomized powders. Characterization of the water-atomized powders and their heated forms was conducted by using X-ray diffraction, scanning electron microscopy and transmission electron microscopy. Fine water-atomized powder microstructures consisted of primary hexagonal ?-Cu{sub 6.25}Sn{sub 5} dendrites coexisting with interdendritic ?-Cu{sub 6.25}Sn{sub 5} + ?-Sn eutectic. Solidification of fine melt droplets was governed by surface nucleation and growth of the primary hexagonal ?-Cu{sub 6.25}Sn{sub 5} dendrites followed by ?-Cu{sub 6.25}Sn{sub 5} + ?-Sn eutectic solidification of the remnant liquid. In coarse melt droplets, nucleation and growth of primary ?-Cu{sub 3}Sn dendrites were followed by peritectic reaction (?-Cu{sub 3}Sn + liquid ? ?-Cu{sub 6.25}Sn{sub 5}) or direct crystallization of ?-Cu{sub 6.25}Sn{sub 5} phase from the undercooled melt. Finally, the ?-Cu{sub 6.25}Sn{sub 5} + ?-Sn eutectic solidification of the remnant liquid occurred. Heating of the water-atomized powders at different temperatures resulted in microstructural homogenization. The water-atomized powders with mixed phases were transformed to powders with single monoclinic ?-Cu{sub 6}Sn{sub 5} phase. - Highlights: • The Cu{sub 6}Sn{sub 5} intermetallic powder production route was proposed. • Single phase Cu{sub 6}Sn{sub 5} powders could be by water atomization and heating. • Water-atomized Cu–Sn powders contained mixed Cu–Sn phases. • Solidification and heat treatment of water-atomized Cu–Sn powders are explained.

Tongsri, Ruangdaj, E-mail: ruangdt@mtec.or.th [Powder Metallurgy Research and Development Unit (PM-RDU), National Metal and Materials Technology Center, 114 Paholyothin, Klong 1, Klong Luang, Pathum Thani 12120 (Thailand); Yotkaew, Thanyaporn, E-mail: thanyy@mtec.or.th [Powder Metallurgy Research and Development Unit (PM-RDU), National Metal and Materials Technology Center, 114 Paholyothin, Klong 1, Klong Luang, Pathum Thani 12120 (Thailand); Krataitong, Rungtip, E-mail: rungtipk@mtec.or.th [Powder Metallurgy Research and Development Unit (PM-RDU), National Metal and Materials Technology Center, 114 Paholyothin, Klong 1, Klong Luang, Pathum Thani 12120 (Thailand); Wila, Pongsak, E-mail: pongsakw@mtec.or.th [Powder Metallurgy Research and Development Unit (PM-RDU), National Metal and Materials Technology Center, 114 Paholyothin, Klong 1, Klong Luang, Pathum Thani 12120 (Thailand); Sir-on, Autcharaporn, E-mail: autchars@mtec.or.th [Materials Characterization Research Unit (MCRU), National Metal and Materials Technology Center, 114 Paholyothin, Klong 1, Klong Luang, Pathum Thani 12120 (Thailand); Muthitamongkol, Pennapa, E-mail: pennapm@mtec.or.th [Materials Characterization Research Unit (MCRU), National Metal and Materials Technology Center, 114 Paholyothin, Klong 1, Klong Luang, Pathum Thani 12120 (Thailand); Tosangthum, Nattaya, E-mail: nattayt@mtec.or.th [Powder Metallurgy Research and Development Unit (PM-RDU), National Metal and Materials Technology Center, 114 Paholyothin, Klong 1, Klong Luang, Pathum Thani 12120 (Thailand)

2013-12-15T23:59:59.000Z

7

Investigation of a novel passivation technique for gas atomized magnesium powders.  

E-Print Network [OSTI]

??Gas atomized magnesium powders are critical for the production of a wide variety of flares, tracer projectiles, and other munitions for the United States military,… (more)

Steinmetz, Andrew Douglas

2011-01-01T23:59:59.000Z

8

Production and Characterization of Atomized U-Mo Powder by the Rotating Electrode Process  

SciTech Connect (OSTI)

In order to produce feedstock fuel powder for irradiation testing, the Idaho National Laboratory has produced a rotating electrode type atomizer to fabricate uranium-molybdenum alloy fuel. Operating with the appropriate parameters, this laboratory-scale atomizer produces fuel in the desired size range for the RERTR dispersion experiments. Analysis of the powder shows a homogenous, rapidly solidified microstructure with fine equiaxed grains. This powder has been used to produce irradiation experiments to further test adjusted matrix U-Mo dispersion fuel.

C.R. Clark; B.R. Muntifering; J.F. Jue

2007-09-01T23:59:59.000Z

9

Advancements in Ti Alloy Powder Production by Close-Coupled Gas Atomization  

SciTech Connect (OSTI)

As the technology for titanium metal injection molding (Ti-MIM) becomes more readily available, efficient Ti alloy fine powder production methods are required. An update on a novel close-coupled gas atomization system has been given. Unique features of the melting apparatus are shown to have measurable effects on the efficiency and ability to fully melt within the induction skull melting system (ISM). The means to initiate the melt flow were also found to be dependent on melt apparatus. Starting oxygen contents of atomization feedstock are suggested based on oxygen pick up during the atomization and MIM processes and compared to a new ASTM specification. Forming of titanium by metal injection molding (Ti-MIM) has been extensively studied with regards to binders, particle shape, and size distribution and suitable de-binding methods have been discovered. As a result, the visibility of Ti-MIM has steadily increased as reviews of technology, acceptability, and availability have been released. In addition, new ASTM specification ASTM F2885-11 for Ti-MIM for biomedical implants was released in early 2011. As the general acceptance of Ti-MIM as a viable fabrication route increases, demand for economical production of high quality Ti alloy powder for the preparation of Ti-MIM feedstock correspondingly increases. The production of spherical powders from the liquid state has required extensive pre-processing into different shapes thereby increasing costs. This has prompted examination of Ti-MIM with non-spherical particle shape. These particles are produced by the hydride/de-hydride process and are equi-axed but fragmented and angular which is less than ideal. Current prices for MIM quality titanium powder range from $40-$220/kg. While it is ideal for the MIM process to utilize spherical powders within the size range of 0.5-20 {mu}m, titanium's high affinity for oxygen to date has prohibited the use of this powder size range. In order to meet oxygen requirements the top size cut has traditionally been 45 {mu}m, and in some instances a bottom cut at +5 {mu}m is made to remove ultra-fine particles and reduce oxygen content. Predictably, use of irregular shaped or larger particle feedstock powder can reduce part quality as sintering shrinkage and part detail suffer. Thus, widespread production and technological use of Ti-MIM is limited due in large part to Ti alloy feedstock cost and availability, not MIM processing capability. Lower cost feedstock of fine, spherical Ti alloy powder with sufficient purity must be available in order to fully utilize the advantages of the Ti-MIM processing route allowing expansion of the market to small complex Ti parts in many high volume applications.

Heidloff, Andy; Rieken, Joel; Anderson, Iver; Byrd, David

2011-04-01T23:59:59.000Z

10

Gas atomized precursor alloy powder for oxide dispersion strengthened ferritic stainless steel  

SciTech Connect (OSTI)

Gas atomization reaction synthesis (GARS) was employed as a simplified method for producing precursor powders for oxide dispersion strengthened (ODS) ferritic stainless steels (e.g., Fe-Cr-Y-(Ti,Hf)-O), departing from the conventional mechanical alloying (MA) process. During GARS processing a reactive atomization gas (i.e., Ar-O{sub 2}) was used to oxidize the powder surfaces during primary break-up and rapid solidification of the molten alloy. This resulted in envelopment of the powders by an ultra-thin (t < 150 nm) metastable Cr-enriched oxide layer that was used as a vehicle for solid-state transport of O into the consolidated microstructure. In an attempt to better understand the kinetics of this GARS reaction, theoretical cooling curves for the atomized droplets were calculated and used to establish an oxidation model for this process. Subsequent elevated temperature heat treatments, which were derived from Rhines pack measurements using an internal oxidation model, were used to promote thermodynamically driven O exchange reactions between trapped films of the initial Cr-enriched surface oxide and internal Y-enriched intermetallic precipitates. This novel microstructural evolution process resulted in the successful formation of nano-metric Y-enriched dispersoids, as confirmed using high energy X-ray diffraction and transmission electron microscopy (TEM), equivalent to conventional ODS alloys from MA powders. The thermal stability of these Y-enriched dispersoids was evaluated using high temperature (1200°C) annealing treatments ranging from 2.5 to 1,000 hrs of exposure. In a further departure from current ODS practice, replacing Ti with additions of Hf appeared to improve the Y-enriched dispersoid thermal stability by means of crystal structure modification. Additionally, the spatial distribution of the dispersoids was found to depend strongly on the original rapidly solidified microstructure. To exploit this, ODS microstructures were engineered from different powder particle size ranges, illustrating microstructural control as a function of particle solidification rate. The consolidation of ultra-fine powders (dia. ? 5?m) resulted in a significant reduction in dispersoid size and spacing, consistent with initial scanning electron microscopy studies on as-atomized cross-sectioned particles that suggested that these powders solidified above the threshold velocity to effectively solute trap Y within the ?-(Fe,Cr) matrix. Interestingly, when the solidification velocity as a function of particle size was extracted from the aforementioned theoretical particle cooling curves, it could be offered as supporting evidence for these microstructure observations. Thermal-mechanical treatments also were used to create and evaluate the stability of a dislocation substructure within these alloys, using microhardness and TEM analysis of the alloy sub-grain and grain structure. Moreover, elevated temperature tensile tests up to 800°C were used to assess the initial mechanical strength of the ODS microstructure.

Rieken, Joel

2011-12-13T23:59:59.000Z

11

2015 Iowa Wind Power Conference and Iowa Wind Energy Association...  

Energy Savers [EERE]

2015 Iowa Wind Power Conference and Iowa Wind Energy Association Midwest Regional Energy Job Fair 2015 Iowa Wind Power Conference and Iowa Wind Energy Association Midwest Regional...

12

Forestry Policies (Iowa)  

Broader source: Energy.gov [DOE]

Iowa has over 3 million acres of forested land, managed by the State Department of Natural Resources, Forestry Bureau. Iowa forests are summarized in DNR's 2010 Assessment "Iowa's Forests Today":...

13

Iowa Energy Bank  

Broader source: Energy.gov [DOE]

The Iowa Energy Bank offers Iowa's public facilities, schools, area education agencies, colleges, universities, hospitals and local governments a 1% financing option for the implementation of cost...

14

Eminent Domain Law (Iowa)  

Broader source: Energy.gov [DOE]

These regulations confer the power of eminent domain and describe procedures for exercising eminent domain in Iowa.

15

Aluminum powder metallurgy processing  

SciTech Connect (OSTI)

The objective of this dissertation is to explore the hypothesis that there is a strong linkage between gas atomization processing conditions, as-atomized aluminum powder characteristics, and the consolidation methodology required to make components from aluminum powder. The hypothesis was tested with pure aluminum powders produced by commercial air atomization, commercial inert gas atomization, and gas atomization reaction synthesis (GARS). A comparison of the GARS aluminum powders with the commercial aluminum powders showed the former to exhibit superior powder characteristics. The powders were compared in terms of size and shape, bulk chemistry, surface oxide chemistry and structure, and oxide film thickness. Minimum explosive concentration measurements assessed the dependence of explosibility hazard on surface area, oxide film thickness, and gas atomization processing conditions. The GARS aluminum powders were exposed to different relative humidity levels, demonstrating the effect of atmospheric conditions on post-atomization processing conditions. The GARS aluminum powders were exposed to different relative humidity levels, demonstrating the effect of atmospheric conditions on post-atomization oxidation of aluminum powder. An Al-Ti-Y GARS alloy exposed in ambient air at different temperatures revealed the effect of reactive alloy elements on post-atomization powder oxidation. The pure aluminum powders were consolidated by two different routes, a conventional consolidation process for fabricating aerospace components with aluminum powder and a proposed alternative. The consolidation procedures were compared by evaluating the consolidated microstructures and the corresponding mechanical properties. A low temperature solid state sintering experiment demonstrated that tap densified GARS aluminum powders can form sintering necks between contacting powder particles, unlike the total resistance to sintering of commercial air atomization aluminum powder.

Flumerfelt, J.F.

1999-02-12T23:59:59.000Z

16

Enterprise Zones (Iowa)  

Broader source: Energy.gov [DOE]

The Enterprise Zones Program is an incentive for business expansion designed to stimulate development by targeting economically distressed areas in Iowa. Through state and local tax incentives,...

17

Hydroelectric Plants (Iowa)  

Broader source: Energy.gov [DOE]

A permit is required from the Executive Council of Iowa for the construction, maintenance, or operation of any hydroelectric facility. All applications will be subject to a public hearing.

18

Groundwater Protection Act (Iowa)  

Broader source: Energy.gov [DOE]

The Commissioner of the Iowa Department of Natural Resources is required to determine a general groundwater protection strategy and groundwater quality standards for the state, to be approved by...

19

Iowa: Iowa's Clean Energy Resources and Economy (Brochure)  

SciTech Connect (OSTI)

This document highlights the Office of Energy Efficiency and Renewable Energy's investments and impacts in the state of Iowa.

Not Available

2013-03-01T23:59:59.000Z

20

Standard test method for the determination of uranium by ignition and the oxygen to uranium (O/U) atomic ratio of nuclear grade uranium dioxide powders and pellets  

E-Print Network [OSTI]

1.1 This test method covers the determination of uranium and the oxygen to uranium atomic ratio in nuclear grade uranium dioxide powder and pellets. 1.2 This test method does not include provisions for preventing criticality accidents or requirements for health and safety. Observance of this test method does not relieve the user of the obligation to be aware of and conform to all international, national, or federal, state and local regulations pertaining to possessing, shipping, processing, or using source or special nuclear material. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.4 This test method also is applicable to UO3 and U3O8 powder.

American Society for Testing and Materials. Philadelphia

2000-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "iowa powder atomization" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Loess Hills and Southern Iowa Development and Conservation (Iowa)  

Broader source: Energy.gov [DOE]

The Loess Hills Development and Conservation Authority, the Loess Hills Alliance, and the Southern Iowa Development and Conservation Authority are regional organizations with representatives from...

22

Soil Conservation Districts Law (Iowa)  

Broader source: Energy.gov [DOE]

This legislation establishes a soil and water conservation division within the Iowa Department of Agriculture, as well as local soil and water conservation districts. The regulations accompanying...

23

Ultrafine hydrogen storage powders  

DOE Patents [OSTI]

A method of making hydrogen storage powder resistant to fracture in service involves forming a melt having the appropriate composition for the hydrogen storage material, such, for example, LaNi.sub.5 and other AB.sub.5 type materials and AB.sub.5+x materials, where x is from about -2.5 to about +2.5, including x=0, and the melt is gas atomized under conditions of melt temperature and atomizing gas pressure to form generally spherical powder particles. The hydrogen storage powder exhibits improved chemcial homogeneity as a result of rapid solidfication from the melt and small particle size that is more resistant to microcracking during hydrogen absorption/desorption cycling. A hydrogen storage component, such as an electrode for a battery or electrochemical fuel cell, made from the gas atomized hydrogen storage material is resistant to hydrogen degradation upon hydrogen absorption/desorption that occurs for example, during charging/discharging of a battery. Such hydrogen storage components can be made by consolidating and optionally sintering the gas atomized hydrogen storage powder or alternately by shaping the gas atomized powder and a suitable binder to a desired configuration in a mold or die.

Anderson, Iver E. (Ames, IA); Ellis, Timothy W. (Doylestown, PA); Pecharsky, Vitalij K. (Ames, IA); Ting, Jason (Ames, IA); Terpstra, Robert (Ames, IA); Bowman, Robert C. (La Mesa, CA); Witham, Charles K. (Pasadena, CA); Fultz, Brent T. (Pasadena, CA); Bugga, Ratnakumar V. (Arcadia, CA)

2000-06-13T23:59:59.000Z

24

Waste Management Assistance Act (Iowa)  

Broader source: Energy.gov [DOE]

This section promotes the proper and safe storage, treatment, and disposal of solid, hazardous, and low-level radioactive wastes in Iowa, and calls on Iowans to assume responsibility for waste...

25

Economic Development Bond Program (Iowa)  

Broader source: Energy.gov [DOE]

Through its Economic Development Bond Program, the Iowa Finance Authority (IFA) issues tax-exempt bonds on behalf of private entities or organizations for eligible purposes. The responsibility for...

26

Interstate Natural Gas Pipelines (Iowa)  

Broader source: Energy.gov [DOE]

This statute confers upon the Iowa Utilities Board the authority to act as an agent of the federal government in determining pipeline company compliance with federal standards within the boundaries...

27

Preparation of superconductor precursor powders  

DOE Patents [OSTI]

A process for the preparation of a precursor metallic powder composition for use in the subsequent formation of a superconductor. The process comprises the steps of providing an electrodeposition bath comprising an electrolyte medium and a cathode substrate electrode, and providing to the bath one or more soluble salts of one or more respective metals which are capable of exhibiting superconductor properties upon subsequent appropriate treatment. The bath is continually energized to cause the metallic and/or reduced particles formed at the electrode to drop as a powder from the electrode into the bath, and this powder, which is a precursor powder for superconductor production, is recovered from the bath for subsequent treatment. The process permits direct inclusion of all metals in the preparation of the precursor powder, and yields an amorphous product mixed on an atomic scale to thereby impart inherent high reactivity. Superconductors which can be formed from the precursor powder include pellet and powder-in-tube products.

Bhattacharya, Raghunath (Littleton, CO)

1998-01-01T23:59:59.000Z

28

Exploring Small-Scale Meat Processing Expansions in Iowa  

E-Print Network [OSTI]

Exploring Small-Scale Meat Processing Expansions in Iowa A Technical Report Submitted@iastate.edu #12;2Exploring Small-Scale Meat Processing Expansions in Iowa April 2011 Overview of Findings Iowa;3Exploring Small-Scale Meat Processing Expansions in Iowa April 2011 Introduction Iowa is a national leader

Debinski, Diane M.

29

Management of Specific Flood Plain Areas (Iowa)  

Broader source: Energy.gov [DOE]

Floodplain management orders by the Iowa Department of Natural Resources as well as approved local ordinances designate an area as a regulated floodplain. These regulations establish minimum...

30

Natural Innovative Renewable Energy formerly Northwest Iowa Renewable...  

Open Energy Info (EERE)

Natural Innovative Renewable Energy formerly Northwest Iowa Renewable Energy Jump to: navigation, search Name: Natural Innovative Renewable Energy (formerly Northwest Iowa...

31

Iowa Water and Wastewater Operators Seek SEP Certification in...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Iowa Water and Wastewater Operators Seek SEP Certification in New Pilot Program Iowa Water and Wastewater Operators Seek SEP Certification in New Pilot Program September 18, 2014 -...

32

A New Biofuels Technology Blooms in Iowa | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

A New Biofuels Technology Blooms in Iowa A New Biofuels Technology Blooms in Iowa Addthis Description Cellulosic biofuels made from agricultural waste have caught the attention of...

33

IOWA STATE UNIVERSITY DEPT OF COMPUTER SCIENCE  

E-Print Network [OSTI]

IOWA STATE UNIVERSITY DEPT OF COMPUTER SCIENCE Presents A Hybrid Intrusion Detection System Yanxin.D. Candidate in Computer Science At Iowa State University Yanxin Wang is a Ph.D. candidate in Computer Science and Astronautics in 1993, M.S. degree in Computer Science at Tsinghua University in 1996 and also M.S. in Computer

Mayfield, John

34

Fermilab Today | Iowa State University  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsing ZirconiaPolicyFeasibility ofSmall Works: 2008SubmitMu2eIowa State University

35

Recovery Act State Memos Iowa  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion | Department ofT ib l L dDepartment ofList?Department09 SectionGeorgia ForIowa For questions

36

Powder collection apparatus/method  

DOE Patents [OSTI]

Device for separating and collecting ultrafine atomized powder from the gas stream of a gas atomizing apparatus comprises a housing having an interior wall oriented at an angle relative to horizontal so as to form a downwardly converging, conical expansion chamber, an inlet conduit communicated to the expansion chamber proximate an upper region thereof for receiving the gas stream, and an outlet proximate a lower region of the expansion chamber. The inlet conduit is oriented at a compound inclined angle (with respect to horizontal) selected to promote separation and collection of powder from the gas stream in the expansion chamber. The compound angle comprises a first entrance angle that is greater than the angle of repose of the powder on the housing interior wall such that any powder accumulation in the inlet conduit tends to flow down the wall toward the outlet. The second angle is selected generally equal to the angle of the housing interior wall measured from the same horizontal plane so as to direct the gas stream into the expansion chamber generally tangent to the housing interior wall to establish a downward swirling gas stream flow in the expansion chamber. A powder collection container is communicated to the outlet of the expansion chamber to collect the powder for further processing. 4 figures.

Anderson, I.E.; Terpstra, R.L.; Moore, J.A.

1994-01-11T23:59:59.000Z

37

Preparation of superconductor precursor powders  

DOE Patents [OSTI]

A process for the preparation of a precursor metallic powder composition for use in the subsequent formation of a superconductor. The process comprises the steps of providing an electrodeposition bath comprising an electrolyte medium and a cathode substrate electrode, and providing to the bath one or more soluble salts of one or more respective metals which are capable of exhibiting superconductor properties upon subsequent appropriate treatment. The bath is continually energized to cause the metallic and/or reduced particles formed at the electrode to drop as a powder from the electrode into the bath, and this powder, which is a precursor powder for superconductor production, is recovered from the bath for subsequent treatment. The process permits direct inclusion of all metals in the preparation of the precursor powder, and yields an amorphous product mixed on an atomic scale to thereby impart inherent high reactivity. Superconductors which can be formed from the precursor powder include pellet and powder-in-tube products. 7 figs.

Bhattacharya, R.

1998-08-04T23:59:59.000Z

38

Preparation of superconductor precursor powders  

DOE Patents [OSTI]

A process for the preparation of a precursor metallic powder composition for use in the subsequent formation of a superconductor. The process comprises the steps of providing an electrodeposition bath comprising an electrolyte medium and a cathode substrate electrode, and providing to the bath one or more soluble salts of one or more respective metals, such as nitrate salts of thallium, barium, calcium, and copper, which are capable of exhibiting superconductor properties upon subsequent appropriate treatment. The bath is continually energized to cause the metallic particles formed at the electrode to drop as a powder from the electrode into the bath, and this powder, which is a precursor powder for superconductor production, is recovered from the bath for subsequent treatment. The process permits direct inclusion of thallium in the preparation of the precursor powder, and yields an amorphous product mixed on an atomic scale to thereby impart inherent high reactivity. Superconductors which can be formed from the precursor powder include pellet and powder-in-tube products.

Bhattacharya, Raghunath (Littleton, CO); Blaugher, Richard D. (Evergreen, CO)

1995-01-01T23:59:59.000Z

39

Atomizing nozzle and process  

DOE Patents [OSTI]

High pressure atomizing nozzle includes a high pressure gas manifold having a divergent expansion chamber between a gas inlet and arcuate manifold segment to minimize standing shock wave patterns in the manifold and thereby improve filling of the manifold with high pressure gas for improved melt atomization. The atomizing nozzle is especially useful in atomizing rare earth-transition metal alloys to form fine powder particles wherein a majority of the powder particles exhibit particle sizes having near-optimum magnetic properties.

Anderson, I.E.; Figliola, R.S.; Molnar, H.M.

1993-07-20T23:59:59.000Z

40

Solar Energy Systems Tax Credit (Corporate) (Iowa)  

Broader source: Energy.gov [DOE]

Iowa offers a 15% corporate tax credit for solar energy systems. The credit is based on the federal tax credits for solar; a taxpayer may claim 50% of the value of the [http://dsireusa.org...

Note: This page contains sample records for the topic "iowa powder atomization" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

A new Pachytesta ovule from Iowa  

E-Print Network [OSTI]

A new species of the medullosan seed fern genus, Pachytesta, is described from specimens discovered in coal balls from Iowa. The specimens used in this study were located in coal balls, which are concretions of ancient permineralized peat...

McCarty, Mary Rachel

2009-05-15T23:59:59.000Z

42

Iowa Central Quality Fuel Testing Laboratory  

SciTech Connect (OSTI)

The objective of this project is to finalize the creation of an independent quality fuel testing laboratory on the campus of Iowa Central Community College in Fort Dodge, Iowa that shall provide the exploding biofuels industry a timely and cost-effective centrally located laboratory to complete all state and federal fuel and related tests that are required. The recipient shall work with various state regulatory agencies, biofuel companies and state and national industry associations to ensure that training and testing needs of their members and American consumers are met. The recipient shall work with the Iowa Department of Ag and Land Stewardship on the development of an Iowa Biofuel Quality Standard along with the Development of a standard that can be used throughout industry.

Heach, Don; Bidieman, Julaine

2013-09-30T23:59:59.000Z

43

Weatherization Fueling Iowa Job Opportunities | Department of...  

Broader source: Energy.gov (indexed) [DOE]

thought about not having a steady income constantly reminded him to stay focused on the job hunt. Fortunately, Community Action of Eastern Iowa was one of the first agencies in...

44

Greenhouse Gas Inventory and Registry (Iowa)  

Broader source: Energy.gov [DOE]

The Iowa Department of Natural Resources is required to establish a method for collecting emissions estimates from producers of greenhouse gases. Reporting is mandatory for some entities, and the...

45

IOWA STATE UNIVERSITY OF SCIENCE AND TECHNOLOGY  

E-Print Network [OSTI]

, probability and mathematical statistics, and statistics in the social sciences. These seminars allow faculty to offer weekly research seminar series in survey statistics, engineering statistics, ecologicalIOWA STATE UNIVERSITY OF SCIENCE AND TECHNOLOGY #12

46

Oil, Gas, and Metallic Minerals (Iowa)  

Broader source: Energy.gov [DOE]

Operators of oil, gas, and metallic mineral exploration and production operations are required to obtain a drilling permit from the Iowa Department of Natural Resources and file specific forms with...

47

Solar Energy Systems Tax Credit (Personal) (Iowa)  

Broader source: Energy.gov [DOE]

Iowa offers a 15% individual tax credit for solar energy systems. The credit is based on the federal tax credits for solar; individuals can claim 50% of the [http://dsireusa.org/incentives...

48

Iowa Ethanol LLC | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy Resources Jump to:46 - 429 Throttled (bot load)InternationalRenewableIowa Department of EconomicIowa

49

Iowa Lakes Electric Cooperative | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy Resources Jump to:46 - 429 Throttled (bot load)InternationalRenewableIowa Department of EconomicIowaLakes

50

Iowa/Wind Resources | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy Resources Jump to:46 - 429 Throttled (bot load)InternationalRenewableIowa DepartmentIowa Jump to:

51

Powder dispersion system  

DOE Patents [OSTI]

A powder dispersion method and apparatus comprising an air eductor and a powder dispensing syringe inserted into a suction connection of the air eductor.

Gorenz, Heather M. (Albuquerque, NM); Brockmann, John E. (Albuquerque, NM); Lucero, Daniel A. (Albuquerque, NM)

2011-09-20T23:59:59.000Z

52

Iowa Stubborn: Meredith Willson's Musical Characterization of his Fellow Iowans  

E-Print Network [OSTI]

The song “Iowa Stubborn” from The Music Man provides a key to understanding the development and musical content of the work. Willson’s “Iowa Stubborn” insistence on the organic development of songs from the narrative led ...

Schwartz, Roberta F.

2009-01-01T23:59:59.000Z

53

Biofuels technology blooms in Iowa | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Biofuels technology blooms in Iowa Biofuels technology blooms in Iowa May 7, 2010 - 4:45pm Addthis Cellulosic biofuels made from agricultural waste have caught the attention of...

54

Electric Generating and Transmission Facilities – Emissions Management (Iowa)  

Broader source: Energy.gov [DOE]

This section details responsibilities of the Iowa Utility Board, including the policies for electricity rate-making for the state of Iowa, certification of natural gas providers, and other policies...

55

Iowa lab gets critical materials research center  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists'Montana.ProgramJulietipDepartmentJune 20,AmongDevelopmentJulyInvoluntaryIowa Iowa lab

56

IOWA RECOVERY ACT SNAPSHOT | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeatMulti-Dimensionalthe U.S. Department ofIOWA RECOVERY ACT SNAPSHOT IOWA RECOVERY ACT

57

Iowa/Incentives | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpInc Place: EdenOverview OfIowa/Incentives < Iowa Jump to:

58

Stability of Iowa mutant and wild type A?-peptide aggregates  

SciTech Connect (OSTI)

Recent experiments indicate a connection between the structure of amyloid aggregates and their cytotoxicity as related to neurodegenerative diseases. Of particular interest is the Iowa Mutant, which causes early-onset of Alzheimer's disease. While wild-type Amyloid ?-peptides form only parallel beta-sheet aggregates, the mutant also forms meta-stable antiparallel beta sheets. Since these structural variations may cause the difference in the pathological effects of the two A?-peptides, we have studied in silico the relative stability of the wild type and Iowa mutant in both parallel and antiparallel forms. We compare regular molecular dynamics simulations with such where the viscosity of the samples is reduced, which, we show, leads to higher sampling efficiency. By analyzing and comparing these four sets of all-atom molecular dynamics simulations, we probe the role of the various factors that could lead to the structural differences. Our analysis indicates that the parallel forms of both wild type and Iowa mutant aggregates are stable, while the antiparallel aggregates are meta-stable for the Iowa mutant and not stable for the wild type. The differences result from the direct alignment of hydrophobic interactions in the in-register parallel oligomers, making them more stable than the antiparallel aggregates. The slightly higher thermodynamic stability of the Iowa mutant fibril-like oligomers in its parallel organization over that in antiparallel form is supported by previous experimental measurements showing slow inter-conversion of antiparallel aggregates into parallel ones. Knowledge of the mechanism that selects between parallel and antiparallel conformations and determines their relative stability may open new avenues for the development of therapies targeting familial forms of early-onset Alzheimer's disease.

Alred, Erik J.; Scheele, Emily G.; Berhanu, Workalemahu M.; Hansmann, Ulrich H. E., E-mail: uhansmann@ou.edu [Department of Chemistry and Biochemistry, University of Oklahoma, Norman, Oklahoma 73019 (United States)

2014-11-07T23:59:59.000Z

59

College of Engineering Iowa State University  

E-Print Network [OSTI]

College of Engineering Iowa State University Venture Fund for Interdisciplinary Research Centers with the university's objective of research expenditures exceeding $600M. One path to that objective involves the creation of large-scale interdisciplinary centers having significant extramural funding. The funding

Lin, Zhiqun

60

IOWA STATE UNIVERSITY DEPT OF COMPUTER SCIENCE  

E-Print Network [OSTI]

IOWA STATE UNIVERSITY DEPT OF COMPUTER SCIENCE Presents The last two decades has seen an increased is a PhD candidate in the Department of Computer Science at the State University of New York at Stony of New York at Stony Brook in 2001 and his BE degree in Computer Science and Engineering from Jadavpur

Mayfield, John

Note: This page contains sample records for the topic "iowa powder atomization" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

IOWA STATE UNIVERSITY DEPT OF COMPUTER SCIENCE  

E-Print Network [OSTI]

IOWA STATE UNIVERSITY DEPT OF COMPUTER SCIENCE Presents Mobile and wireless networks have undergone.D. degree in computer science from the University of Massachusetts at Amherst in 2003, and he is currently an assistant professor in the Computer Science Department at the City College of New York. He also received a B

Mayfield, John

62

Name Institution Anderson, Christopher Iowa State University  

E-Print Network [OSTI]

Name Institution Anderson, Christopher Iowa State University Anderson, Don NOAA/CPO Baker, Ian;Li, Hongyi PNNL Lindsay, Keith NCAR Lo, Min-Hui National Taiwan University Lombardozzi, Danica Portland Water Bureau Still, Christopher UC Santa Barbara Subin, Zachary Lawrence Berkeley National Lab

63

Iowa Farm Outlook Department of Economics  

E-Print Network [OSTI]

the hog inventories to be up slightly from a year ago with the evidence that a controlled expansion inventories nationally and in Iowa. March 30 was a very busy day for USDA reports with a crop plantings report and a hog and pig report released on the same day. Most analysts were expecting the hog inventories to be up

Lin, Zhiqun

64

Iowa Water Center Annual Technical Report  

E-Print Network [OSTI]

influence water quality and restoration potential? How does stream channelization influence water quality of the United States. Human activities have altered stream hydrology that affects water quality. Stream-2010 Iowa Water Center research program is on stream dynamics affecting water quality. We are interested

65

Precision powder feeder  

DOE Patents [OSTI]

A new class of precision powder feeders is disclosed. These feeders provide a precision flow of a wide range of powdered materials, while remaining robust against jamming or damage. These feeders can be precisely controlled by feedback mechanisms.

Schlienger, M. Eric (Albuquerque, NM); Schmale, David T. (Albuquerque, NM); Oliver, Michael S. (Sandia Park, NM)

2001-07-10T23:59:59.000Z

66

Polymer quenched prealloyed metal powder  

DOE Patents [OSTI]

A powder metallurgical process of preparing a sheet from a powder having an intermetallic alloy composition such as an iron, nickel or titanium aluminide. The sheet can be manufactured into electrical resistance heating elements having improved room temperature ductility, electrical resistivity, cyclic fatigue resistance, high temperature oxidation resistance, low and high temperature strength, and/or resistance to high temperature sagging. The iron aluminide has an entirely ferritic microstructure which is free of austenite and can include, in weight %, 4 to 32% Al, and optional additions such as .ltoreq.1% Cr, .gtoreq.0.05% Zr .ltoreq.2% Ti, .ltoreq.2% Mo, .ltoreq.1% Ni, .ltoreq.0.75% C, .ltoreq.0.1% B, .ltoreq.1% submicron oxide particles and/or electrically insulating or electrically conductive covalent ceramic particles, .ltoreq.1% rare earth metal, and/or .ltoreq.3 % Cu. The process includes forming a non-densified metal sheet by consolidating a powder having an intermetallic alloy composition such as by roll compaction, tape casting or plasma spraying, forming a cold rolled sheet by cold rolling the non-densified metal sheet so as to increase the density and reduce the thickness thereof and annealing the cold rolled sheet. The powder can be a water, polymer or gas atomized powder which is subjecting to sieving and/or blending with a binder prior to the consolidation step. After the consolidation step, the sheet can be partially sintered. The cold rolling and/or annealing steps can be repeated to achieve the desired sheet thickness and properties. The annealing can be carried out in a vacuum furnace with a vacuum or inert atmosphere. During final annealing, the cold rolled sheet recrystallizes to an average grain size of about 10 to 30 .mu.m. Final stress relief annealing can be carried out in the B2 phase temperature range.

Hajaligol, Mohammad R. (Midlothian, VA); Fleischhauer, Grier (Midlothian, VA); German, Randall M. (State College, PA)

2001-01-01T23:59:59.000Z

67

Jackson County, Iowa: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy Resources Jump to:46 - 429 Throttled (botOpen Energy2005) |JMalucelliIowa Andrew, Iowa Baldwin, Iowa

68

Orient, Iowa: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoading map...(UtilityCounty, Michigan:OregonTransmissionHeader.png RoadmapCambridgeIowa: Energy

69

Hastings, Iowa: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy Resources Jump to: navigation,Ohio:Greer County is8584°,HardyIowaHaskell County is a county

70

Manly, Iowa: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy Resources Jump to:46 - 429Lacey,(MonasterLowellis a town in Carroll County,ManitobaManly, Iowa: Energy

71

Runnells, Iowa: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ < RAPID Jump to: navigation, searchVirginiaRoosevelt Gardens is°andRubidoux,RukminibaiRunnells, Iowa:

72

Central Iowa Power Cooperative | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartmentAUDIT REPORTOpenWendeGuoCatalyst Renewables JumpViewCentral ElectricIowa

73

Alternative Fuels Data Center: Iowa Information  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels Data Center Home PageEmerging Fuels Printable Version Share thisIndianaIowa

74

E-Print Network 3.0 - area ames iowa Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

29 Barn Swallow Breeding habitat usually contains open areas (fields, meadows, farm ponds, marshes, CRP and Summary: . Roosa. 1984. Iowa birds. Iowa State University...

75

PRE-STUDY COMMENTS OF IOWA UTILITIES BOARD ON DOE 2012 ELECTRIC...  

Broader source: Energy.gov (indexed) [DOE]

STUDY COMMENTS OF IOWA UTILITIES BOARD ON DOE 2012 ELECTRIC TRANSMISSION CONGESTION STUDY JANUARY 2012 The Iowa Utilities Board (Board) is pleased to provide these comments as the...

76

Multiple feed powder splitter  

DOE Patents [OSTI]

A device for providing uniform powder flow to the nozzles when creating solid structures using a solid fabrication system such as the directed light fabrication (DLF) process. In the DLF process, gas entrained powders are passed through the focal point of a moving high-power laser light which fuses the particles in the powder to a surface being built up in layers. The invention is a device providing uniform flow of gas entrained powders to the nozzles of the DLF system. The device comprises a series of modular splitters which are slidably interconnected and contain an integral flow control mechanism. The device can take the gas entrained powder from between one to four hoppers and split the flow into eight tubular lines which feed the powder delivery nozzles of the DLF system.

Lewis, Gary K. (Los Alamos, NM); Less, Richard M. (Los Alamos, NM)

2002-01-01T23:59:59.000Z

77

Multiple feed powder splitter  

DOE Patents [OSTI]

A device for providing uniform powder flow to the nozzles when creating solid structures using a solid fabrication system such as the directed light fabrication (DLF) process. In the DLF process, gas entrained powders are passed through the focal point of a moving high-power laser light which fuses the particles in the powder to a surface being built up in layers. The invention is a device providing uniform flow of gas entrained powders to the nozzles of the DLF system. The device comprises a series of modular splitters which are slidably interconnected and contain an integral flow control mechanism. The device can take the gas entrained powder from between one to four hoppers and split the flow into eight tubular lines which feed the powder delivery nozzles of the DLF system.

Lewis, Gary K. (Los Alamos, NM); Less, Richard M. (Los Alamos, NM)

2001-01-01T23:59:59.000Z

78

UITV University of Iowa Cable Television ITS VIDEO SERVICES  

E-Print Network [OSTI]

UITV ­ University of Iowa Cable Television ITS VIDEO SERVICES 1 UITV Telecommunication and Network Services ITS Video Services 23 Lindquist Center 319-335-5898 UITV, University of Iowa Cable Television Operations Report Calendar Year 2006 February 12, 2007 ­ Michael J. McBride, Video Services Program Manager

79

Iowa's competitive strengths in manufacturing emerged early in the state's history. By 1900, Iowa ranked  

E-Print Network [OSTI]

. Another 49.3 percent of Iowa's manufacturing firms are owned by small or medium- sized enterprises (SMEs.1% 7.8% 9.7% 11.4% 11.5% 13.8% Utilities and mining Information Construction Transportation Educational and health care services Real estate Trade Government Finance and insurance Manufacturing

Lin, Zhiqun

80

Biaxially textured articles formed by powder metallurgy  

DOE Patents [OSTI]

A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of ternary mixtures consisting of: Ni powder, Cu powder, and Al powder, Ni powder, Cr powder, and Al powder; Ni powder, W powder and Al powder; Ni powder, V powder, and Al powder; Ni powder, Mo powder, and Al powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

2003-08-05T23:59:59.000Z

Note: This page contains sample records for the topic "iowa powder atomization" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Cogeneration at Iowa Methodist Medical Center  

E-Print Network [OSTI]

Medical Center of Des Moines, Iowa, is installing two 1,500 kW Fairbanks Morse turbocharged dual-fuel reciprocating engine generators. The system will be installed with re covery of exhaust waste heat as steam and jacket, lube Oil, and intercooler... outages or duri g peak thermal loads. Backup and peaking power capa ity is generally a provision of the interconnection gree ment with the electric utility. Provisions m st also be made to remove excess waste heat to b lance thermal production...

Thunem, C. B.; Schebler, S. J.; Love, G. I.

82

Urbandale, Iowa: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ < RAPID Jump to:Seadov PtyInformation UC 19-6-401Upson County, Georgia: EnergyUrbandale, Iowa: Energy

83

Wallingford, Iowa: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ < RAPID Jump to:Seadov PtyInformationSEDS data JumpWakulla County,Wall,| Open EnergyIowa: Energy

84

Iowa State University / Ames Laboratory Leave Information  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsingFunInfrared LandResponsesIon/Surface Reactions and IonEnergyIonsIowa State

85

Joice, Iowa: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy Resources Jump to:46 - 429 Throttled (botOpen6 Climate ZoneJerome isJohnsonJohnstown,Joice, Iowa: Energy

86

Alta, Iowa: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300Algoil Jump to:Information332InformationCoreAlta, Iowa: Energy

87

Altoona, Iowa: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300Algoil JumpAltergy Systems Place: Folsom,IncAltoona, Iowa: Energy Resources

88

Emerson, Iowa: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address:011-DNA Jump37. It is classifiedProject) | OpenTexas:CountyElyria,EmelEmerson, Iowa:

89

Clean Cities: Iowa Clean Cities coalition  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels Data Center Home PageEmerging FuelsRelated4 VehicleGeneseeIowa Clean Cities

90

Sandia National Laboratories: Iowa State University  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -theErik Spoerke SSLS ExhibitIowa State University Sandia and Partners Complete

91

2010 Research and Technology Transfer Committee-Iowa February 16, 2010  

E-Print Network [OSTI]

Construction Co., Inc. Todd Hanson Iowa DOT Robert Kieffer Boone County John Joiner City of Ames James King Bob Dawson Iowa DOT Jim Grove FHWA Jim George Dallas County Jon Hanson City of Ankeny Tom Green Allied Fayette County Brian Keierleber Buchanan County Kevin Merryman Iowa DOT Ron Knoche City of Iowa City David

92

Iowa NSF EPSCoR is a statewide program funded by NSF and the State of Iowa dedicated to making Iowa a leader in advanced biofuels, wind energy and energy  

E-Print Network [OSTI]

to making Iowa a leader in advanced biofuels, wind energy and energy efficiency. Summer internships are open

Casavant, Tom

93

Harrison County, Iowa: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy Resources Jump to: navigation,Ohio:Greer County is8584°,HardyIowa Dunlap, Iowa Little Sioux, Iowa Logan,

94

Targeted Energy Efficiency Expert Evaluation (E4) Report: Iowa City Federal Building and U.S. Post Office, Iowa City, IA  

SciTech Connect (OSTI)

Final report summarizing Targeted E4 measures and energy savings analysis for the Iowa City Federal Building and Post Office.

Goddard, James K.; Fernandez, Nicholas; Underhill, Ronald M.; Gowri, Krishnan

2013-03-01T23:59:59.000Z

95

Die-target for dynamic powder consolidation  

DOE Patents [OSTI]

A die/target is disclosed for consolidation of a powder, especially an atomized rapidly solidified metal powder, to produce monoliths by the dynamic action of a shock wave, especially a shock wave produced by the detonation of an explosive charge. The die/target comprises a rectangular metal block having a square primary surface with four rectangular mold cavities formed therein to receive the powder. The cavities are located away from the geometrical center of the primary surface and are distributed around such center while also being located away from the geometrical diagonals of the primary surface to reduce the action of reflected waves so as to avoid tensile cracking of the monoliths. The primary surface is covered by a powder retention plate which is engaged by a flyer plate to transmit the shock wave to the primary surface and the powder. Spawl plates are adhesively mounted on other surfaces of the block to act as momentum traps so as to reduce reflected waves in the block. 4 figs.

Flinn, J.E.; Korth, G.E.

1985-06-27T23:59:59.000Z

96

Iowa Climate Change Briefing and Discussion -Monday February 16 The University of Iowa Center for Global and Regional Environmental Research and a variety of  

E-Print Network [OSTI]

Iowa Climate Change Briefing and Discussion - Monday February 16 The University of Iowa Center to a climate change briefing and discussion to highlight the recent report of the Iowa Climate Change Advisory Council. The meeting will be an opportunity to learn more about climate change science its potential

Debinski, Diane M.

97

Iowa State Water Resources Research Institute Annual Technical Report  

E-Print Network [OSTI]

, and high irradiance and long daylength. These conditions are common in Iowa lakes and ponds, especially). Microcystin-LR may also be transferred through the food chain (Kotak et al 1996, Prepas et al 1997) and can

98

The University of Iowa College of Engineering Engineering Professional Development  

E-Print Network [OSTI]

Genomatica San Diego, CA Honeywell Des Plaines, IL Hydrite Chemical Co. Waterloo, IA IATL: Center for Global REU: University of Maryland College Park, MD REU: Colorado Center for Biofuels Golden, CO REU: Iowa

Casavant, Tom

99

Biaxially textured articles formed by powder metallurgy  

DOE Patents [OSTI]

A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of: at least 60 at % Ni powder and at least one of Cr powder, W powder, V powder, Mo powder, Cu powder, Al powder, Ce powder, YSZ powder, Y powder, Mg powder, and RE powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

2003-08-19T23:59:59.000Z

100

Biaxially textured articles formed by powder metallurgy  

DOE Patents [OSTI]

A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of at least 60 at % Ni powder and at least one of Cr powder, W powder, V powder, Mo powder, Cu powder, Al powder, Ce powder, YSZ powder, Y powder, Mg powder, and RE powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

2005-05-10T23:59:59.000Z

Note: This page contains sample records for the topic "iowa powder atomization" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Biaxially textured articles formed by powder metallurgy  

DOE Patents [OSTI]

A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of: at least 60 at % Ni powder and at least one of Cr powder, W powder, V powder, Mo powder, Cu powder, Al powder, Ce powder, YSZ powder, Y powder, Mg powder, and RE powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

2003-08-26T23:59:59.000Z

102

Biaxially textured articles formed by powder metallurgy  

DOE Patents [OSTI]

A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of: at least 60 at % Ni powder and at least one of Cr powder, W powder, V powder, Mo powder, Cu powder, Al powder, Ce powder, YSZ powder, Y powder, Mg powder, and RE powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

2003-07-29T23:59:59.000Z

103

Biaxially textured articles formed by powder metallurgy  

DOE Patents [OSTI]

A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of: at least 60 at % Ni powder and at least one of Cr powder, W powder, V powder, Mo powder, Cu powder, Al powder, Ce powder, YSZ powder, Y powder, Mg powder, and RE powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

2004-09-28T23:59:59.000Z

104

Biaxially textured articles formed by powder metallurgy  

DOE Patents [OSTI]

A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of: at least 60 at % Ni powder and at least one of Cr powder, W powder, V powder, Mo powder, Cu powder, Al powder, Ce powder, YSZ powder, Y powder, Mg powder, and RE powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

2005-01-25T23:59:59.000Z

105

Biaxially textured articles formed by powder metallurgy  

DOE Patents [OSTI]

A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of: at least 60 at % Ni powder and at least one of Cr powder, W powder, V powder, Mo powder, Cu powder, Al powder, Ce powder, YSZ powder, Y powder, Mg powder, and RE powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

Goval, Amit; Williams, Robert K.; Kroeger, Donald M.

2005-06-07T23:59:59.000Z

106

Biaxially textured articles formed by powder metallurgy  

DOE Patents [OSTI]

A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of: at least 60 at % Ni powder and at least one of Cr powder, W powder, V powder, Mo powder, Cu powder, Al powder, Ce powder, YSZ powder, Y powder, Mg powder, and RE powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

2004-09-14T23:59:59.000Z

107

City of West Bend, Iowa (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartmentAUDITOhioOglesby,Sullivan, MissouriWebster City, Iowa (Utility Company)Iowa

108

Apparatus for making environmentally stable reactive alloy powders  

DOE Patents [OSTI]

Apparatus and method are disclosed for making powder from a metallic melt by atomizing the melt to form droplets and reacting the droplets downstream of the atomizing location with a reactive gas. The droplets are reacted with the gas at a temperature where a solidified exterior surface is formed thereon and where a protective refractory barrier layer (reaction layer) is formed whose penetration into the droplets is limited by the presence of the solidified surface so as to avoid selective reduction of key reactive alloyants needed to achieve desired powder end use properties. The barrier layer protects the reactive powder particles from environmental constituents such as air and water in the liquid or vapor form during subsequent fabrication of the powder to end-use shapes and during use in the intended service environment. 7 figs.

Anderson, I.E.; Lograsso, B.K.; Terpstra, R.L.

1996-12-31T23:59:59.000Z

109

Environmentally stable reactive alloy powders and method of making same  

DOE Patents [OSTI]

Apparatus and method are disclosed for making powder from a metallic melt by atomizing the melt to form droplets and reacting the droplets downstream of the atomizing location with a reactive gas. The droplets are reacted with the gas at a temperature where a solidified exterior surface is formed thereon and where a protective refractory barrier layer (reaction layer) is formed whose penetration into the droplets is limited by the presence of the solidified surface so as to avoid selective reduction of key reactive alloys needed to achieve desired powder end use properties. The barrier layer protects the reactive powder particles from environmental constituents such as air and water in the liquid or vapor form during subsequent fabrication of the powder to end-use shapes and during use in the intended service environment. 7 figs.

Anderson, I.E.; Lograsso, B.K.; Terpstra, R.L.

1998-09-22T23:59:59.000Z

110

Prescott, Iowa: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscot County, Maine:Plug Power IncPowder

111

Fish Species of Greatest Conservation Need in Iowa's Nonwadeable Rivers: Distribution, Relative Abundance, and Influences from  

E-Print Network [OSTI]

Fish Species of Greatest Conservation Need in Iowa's Nonwadeable Rivers: Distribution, Relative of fish species of greatest conservation need in Iowa's nonwadeable rivers. · Evaluate the influence of potential movement barriers and anthropogenic stressors on fish distributions in Iowa's nonwadeable rivers

Koford, Rolf R.

112

Economic Value of Outdoor Recreation Activities in Iowa Daniel Otto, KristinTylka, and  

E-Print Network [OSTI]

Economic Value of Outdoor Recreation Activities in Iowa Daniel Otto, KristinTylka, and Susan Erickson Department of Economics Iowa State University Extension and Outreach Center for Agricultural Otto is a professor in the Department of Economics at Iowa State University, Kristin Tylka

Chen, Tsing-Chang "Mike"

113

S:\\(S) SHARE\\_Project PCC\\Administration\\COMMITTEES\\Iowa RT2 Comm\\2011\\Ia Research & Tech Committee Mtg Mins 2-23-2011 Research and Technology Transfer Committee-Iowa  

E-Print Network [OSTI]

Boone County Kevin Merryman Iowa DOT James King Fayette County Shashi Nambisan InTrans ­ Director Sandra Clendenen Holcim Mark Dunn Iowa DOT Bob Dawson Iowa DOT Jim Grove FHWA Jim George Dallas County Todd Hanson Iowa DOT Tom Green Allied Construction Co., Inc. Brian Keierleber Buchanan County Jon Hanson City

114

City of Breda, Iowa (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin:Energy InformationLake SouthChromaIowa (Utility Place:NebraskaBreda, Iowa

115

City of Fontanelle, Iowa (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin:Energy InformationLakeWyomingDurant, IowaEstelline,FayetteFontanelle, Iowa

116

City of Stuart, Iowa (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin:Energy NebraskaStanhope, Iowa (Utility Company) Jump to:Stratton,Iowa (Utility

117

Iowa/Wind Resources/Full Version | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpInc Place: EdenOverview OfIowa/Incentives < Iowa Jump to:Iowa‎ |

118

Microstructural Development in Al-Si Powder During Rapid Solidification  

SciTech Connect (OSTI)

Powder metallurgy has become an increasingly important form of metal processing because of its ability to produce materials with superior mechanical properties. These properties are due in part to the unique and often desirable microstructures which arise as a result of the extreme levels of undercooling achieved, especially in the finest size powder, and the subsequent rapid solidification which occurs. A better understanding of the fundamental processes of nucleation and growth is required to further exploit the potential of rapid solidification processing. Aluminum-silicon, an alloy of significant industrial importance, was chosen as a model for simple eutectic systems displaying an unfaceted/faceted interface and skewed coupled eutectic growth zone, Al-Si powder produced by high pressure gas atomization was studied to determine the relationship between microstructure and alloy composition as a function of powder size and atomization gas. Critical experimental measurements of hypereutectic (Si-rich) compositions were used to determine undercooling and interface velocity, based on the theoretical models which are available. Solidification conditions were analyzed as a function of particle diameter and distance from nucleation site. A revised microstructural map is proposed which allows the prediction of particle morphology based on temperature and composition. It is hoped that this work, by providing enhanced understanding of the processes which govern the development of the solidification morphology of gas atomized powder, will eventually allow for better control of processing conditions so that particle microstructures can be optimized for specific applications.

Amber Lynn Genau

2004-12-19T23:59:59.000Z

119

Silicon nitride/silicon carbide composite powders  

DOE Patents [OSTI]

Prepare silicon nitride-silicon carbide composite powders by carbothermal reduction of crystalline silica powder, carbon powder and, optionally, crystalline silicon nitride powder. The crystalline silicon carbide portion of the composite powders has a mean number diameter less than about 700 nanometers and contains nitrogen. The composite powders may be used to prepare sintered ceramic bodies and self-reinforced silicon nitride ceramic bodies.

Dunmead, Stephen D. (Midland, MI); Weimer, Alan W. (Midland, MI); Carroll, Daniel F. (Midland, MI); Eisman, Glenn A. (Midland, MI); Cochran, Gene A. (Midland, MI); Susnitzky, David W. (Midland, MI); Beaman, Donald R. (Midland, MI); Nilsen, Kevin J. (Midland, MI)

1996-06-11T23:59:59.000Z

120

Iowa State University 2014-2015 1 Computer Science  

E-Print Network [OSTI]

Iowa State University ­ 2014-2015 1 Computer Science Undergraduate Study The department offers curricula leading to the baccalaureate degree in computer science, a minor in computer science Science The curriculum leading to the baccalaureate degree in computer science is designed to prepare

Mayfield, John

Note: This page contains sample records for the topic "iowa powder atomization" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

The University of Iowa College of Engineering Engineering Professional Development  

E-Print Network [OSTI]

City, IA Alcon Research Ltd. Irvine, CA Ankh Data Systems Iowa City, IA Athena GTX Des Moines, IA, IL TriCty Energy, LLC Keokuk, IA Tyson Foods Dakota Dunes, SD U.S. HHS Indian Health Service. Kansas City, MO China Agricultural University Beijing, China Civco Medical Instruments Kalona, IA Civco

Casavant, Tom

122

UITV University of Iowa Cable Television ITS VIDEO SERVICES  

E-Print Network [OSTI]

UITV ­ University of Iowa Cable Television ITS VIDEO SERVICES 1 UITV Report for Fiscal Year July 1 and Student Video Productions. o Programs are received from satellite programming services, like SCOLA foreign a venue for student programming, like Daily Iowan Television News and Student Video Productions. · On July

123

Iowa State Water Resources Research Institute Annual Technical Report  

E-Print Network [OSTI]

, prioritize water quality improvement need, and establish total maximum daily loads or TMDLs for such impaired Congressional District: Iowa 3rd Research Category: Not Applicable Focus Category: Water Quality, Models, Law, Institutions, and Policy Descriptors: TMDL, water quality, GIS, modeling, environmental policy Principal

124

The University of Iowa College of Engineering Engineering Professional Development  

E-Print Network [OSTI]

Naperville, IL City of Rock Island Rock Island, IL City of St. Charles St. Charles, IL City of W. Des Moines Great Lakes Dredge and Dock Chicago, IL Habitat for Humanity Iowa City, IA Hall and Hall EngineersAmericanEnergy Sioux City, IA MNTAP: Valley Craft Lake City, MN Moffat and Nichol Long Beach, CA NextERA Energy (FPL

Jacob, Mathews

125

The University of Iowa College of Engineering Engineering Professional Development  

E-Print Network [OSTI]

Naperville, IL City of Rock Island Rock Island, IL City of St. Charles St. Charles, IL City of W. Des Moines and Marshall Grapevine, TX Great Lakes Dredge and Dock Chicago, IL Habitat for Humanity Iowa City, IA Hall MidAmerican Energy Sioux Falls, SD MNTAP: Valley Craft Lake City, MN Moffat and Nichol Long Beach, CA

Casavant, Tom

126

The University of Iowa College of Engineering Engineering Professional  

E-Print Network [OSTI]

Davenport Works Riverside, IA Alliant Energy Cedar Rapids, IA Alliant Energy Madison, WI Allsteel Muscatine America Waterloo, IA Dell Engineering Solutions Davenport, IA Dominion Energy Hammond, IN Dyersville Die Engineering Solutions Gurgaon, India EMCO Des Moines, IA Enerhetica Cochabamba, Bolivia EPSCoR Iowa City, IA

Casavant, Tom

127

Radiological Powder XRD | EMSL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar HomePromising Science for1 20115,PerformanceUsingFIB/SEM (Quanta)Powder

128

Powder XRD | EMSL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar Home Design PassivePostdoctoral Opportunities Are you Your CartPowder

129

Climate Science and Public Policy in Iowa The productive soils and favorable climate of Iowa underpin the economy of our State.  

E-Print Network [OSTI]

Climate Science and Public Policy in Iowa The productive soils and favorable climate of Iowa in our contributions to national and global food security. Changes in rainfall patterns and other climate and livelihoods. Subtle changes in climate can have large effects on agriculture, making it a sensitive indicator

Debinski, Diane M.

130

Center for Catalysis at Iowa State University  

SciTech Connect (OSTI)

The overall objective of this proposal is to enable Iowa State University to establish a Center that enjoys world-class stature and eventually enhances the economy through the transfer of innovation from the laboratory to the marketplace. The funds have been used to support experimental proposals from interdisciplinary research teams in areas related to catalysis and green chemistry. Specific focus areas included: • Catalytic conversion of renewable natural resources to industrial materials • Development of new catalysts for the oxidation or reduction of commodity chemicals • Use of enzymes and microorganisms in biocatalysis • Development of new, environmentally friendly reactions of industrial importance These focus areas intersect with barriers from the MYTP draft document. Specifically, section 2.4.3.1 Processing and Conversion has a list of bulleted items under Improved Chemical Conversions that includes new hydrogenation catalysts, milder oxidation catalysts, new catalysts for dehydration and selective bond cleavage catalysts. Specifically, the four sections are: 1. Catalyst development (7.4.12.A) 2. Conversion of glycerol (7.4.12.B) 3. Conversion of biodiesel (7.4.12.C) 4. Glucose from starch (7.4.12.D) All funded projects are part of a soybean or corn biorefinery. Two funded projects that have made significant progress toward goals of the MYTP draft document are: Catalysts to convert feedstocks with high fatty acid content to biodiesel (Kraus, Lin, Verkade) and Conversion of Glycerol into 1,3-Propanediol (Lin, Kraus). Currently, biodiesel is prepared using homogeneous base catalysis. However, as producers look for feedstocks other than soybean oil, such as waste restaurant oils and rendered animal fats, they have observed a large amount of free fatty acids contained in the feedstocks. Free fatty acids cannot be converted into biodiesel using homogeneous base-mediated processes. The CCAT catalyst system offers an integrated and cooperative catalytic system that performs both esterification (of free fatty acids) and transesterification (of soybean oil) in a one-pot fashion. This will allow the biodiesel producers to use the aforementioned cheap feedstocks without any pretreatment. In addition, the catalyst system is heterogeneous and is highly recyclable and reusable. Although markets currently exist for glycerin, concern is mounting that the price of glycerin may plummet to $.05 - $.10 per pound if future production exceeds demand. Developing a system to make high value chemicals such as 1,3-propanediol from the glycerin stream will add value for biodiesel producers who implement the new technology. Given the fact that both DuPont and Shell chemicals have announced the commercialization of two new PDO-based polymers, a rapid increase of market demand for a cheaper PDO source is very likely. 4. Comparison of actual accomplishments with goals and objectives From our progress reports, the four areas are: 1. Catalyst development (7.4.12.A) 2. Conversion of glycerol (7.4.12.B) 3. Conversion of biodiesel (7.4.12.C) 4. Glucose from starch (7.4.12.D)

Kraus, George A.

2006-10-17T23:59:59.000Z

131

IOWA STAT-er CHATTER Winter 2009/2010  

E-Print Network [OSTI]

://main.acsevents.org/site/TR/RelayForLife/ RFLFY10MW?team_id=568827&pg=team&fr_id= 22852 Intramural Sports Update Mark McKelvey The STAT-ers wereIOWA STAT-er CHATTER Winter 2009/2010 "All The 's That's Fit to Print" 1 From the Office of the President Lisa Bramer This summer began an exciting new era for the STAT-ers as Snedecor Hall

132

POET-DSM biorefinery in Iowa | Department of Energy  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy UsageAUDITVehicles »Exchange VisitorsforDepartmentPOET-DSM biorefinery in Iowa

133

Iowa Department of Economic Development | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy Resources Jump to:46 - 429 Throttled (bot load)InternationalRenewableIowa Department of Economic

134

Iowa Office of Energy Independence | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy Resources Jump to:46 - 429 Throttled (bot load)InternationalRenewableIowa Department of

135

Iowa Park, Texas: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy Resources Jump to:46 - 429 Throttled (bot load)InternationalRenewableIowa Department ofTexas: Energy

136

Iowa Renewable Fuels Association IRFA | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy Resources Jump to:46 - 429 Throttled (bot load)InternationalRenewableIowa Department ofTexas:

137

Iowa's 2nd congressional district: Energy Resources | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy Resources Jump to:46 - 429 Throttled (bot load)InternationalRenewableIowa Department

138

Fremont County, Iowa: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy Resources Jump to: navigation, search Equivalent URI DBpediaFredonia,Iowa BioProcess Algae Places in

139

City of Alta Vista, Iowa (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartmentAUDIT REPORTOpenWendeGuoCatalystPathways CalculatorinAcworth,Allendale,Alma,Iowa

140

City of Bigelow, Iowa (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartmentAUDIT REPORTOpenWendeGuoCatalystPathwaysAltamontCreek,Jump to:Iowa (Utility

Note: This page contains sample records for the topic "iowa powder atomization" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

City of Brooklyn, Iowa (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartmentAUDITOhio (Utility Company) Jump to: navigation, search Name:Brookings, SouthIowa

142

City of Forest City, Iowa (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartmentAUDITOhio (Utility Company) JumpDoerun,Falmouth, KentuckyFlatonia,City Place: Iowa

143

City of Lake Park, Iowa (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartmentAUDITOhio (UtilityHolyrood, Kansas (UtilityKingfisher,LafayetteIowa References:

144

City of Laurens, Iowa (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartmentAUDITOhio (UtilityHolyrood, KansasLampasas, Texas (Utility Company)Laurens, Iowa

145

City of Maquoketa, Iowa (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartmentAUDITOhio (UtilityHolyrood, KansasLampasas,LuverneMaquoketa, Iowa (Utility

146

City of Marathon, Iowa (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartmentAUDITOhio (UtilityHolyrood, KansasLampasas,LuverneMaquoketa, Iowa

147

City of Neola, Iowa (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartmentAUDITOhio (UtilityHolyrood,Martinsville,Moultrie,Nelson Place: NebraskaNeola, Iowa

148

City of Orange City, Iowa (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartmentAUDITOhioOglesby, Illinois (Utility Company) Jump to: navigation,City Place: Iowa

149

City of Panora, Iowa (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartmentAUDITOhioOglesby, Illinois (Utility Company) Jump to:Osborne,OxfordPanora, Iowa

150

City of Paullina, Iowa (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartmentAUDITOhioOglesby, Illinois (Utility Company) JumpPaullina, Iowa (Utility Company)

151

City of Pella, Iowa (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartmentAUDITOhioOglesby, Illinois (Utility Company) JumpPaullina, Iowa (UtilityPella,

152

City of Pocahontas, Iowa (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartmentAUDITOhioOglesby, Illinois (Utility Company)InformationPocahontas, Iowa

153

City of Shelby, Iowa (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartmentAUDITOhioOglesby, IllinoisSchulenburg, Texas (UtilitySeward,Shelby Place: Iowa

154

City of Traer, Iowa (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartmentAUDITOhioOglesby,Sullivan, Missouri (Utility Company)Toronto Place:Traer, Iowa

155

City of Webster City, Iowa (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartmentAUDITOhioOglesby,Sullivan, MissouriWebster City, Iowa (Utility Company) Jump to:

156

City of West Liberty, Iowa (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartmentAUDITOhioOglesby,Sullivan, MissouriWebster City, Iowa (Utility

157

City of Whittemore, Iowa (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartmentAUDITOhioOglesby,Sullivan, MissouriWebster City,White Place: SouthWhittemore, Iowa

158

City of Woodbine, Iowa (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartmentAUDITOhioOglesby,Sullivan, MissouriWebster City,WhiteIowa (Utility Company) Jump

159

City of Callender, Iowa (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin:Energy InformationLake SouthChromaIowa

160

City of Stratford, Iowa (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin:Energy NebraskaStanhope, Iowa (Utility Company) Jump to:

Note: This page contains sample records for the topic "iowa powder atomization" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

City of Woolstock, Iowa (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin:Energy NebraskaStanhope, Iowa

162

Perceptions of secondary school agriculture teachers regarding biomass production education in Iowa.  

E-Print Network [OSTI]

??With the boom of biorenewable energy, biomass production has become an important segment in agriculture industry (Iowa Energy Center, 2013). A higher workforce will be… (more)

Han, Guang

2014-01-01T23:59:59.000Z

163

E-Print Network 3.0 - ames, iowa state university utr-10 reactor...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

and Ecology 58 Cinnamon Teal Requires open areas with freshwater, brackish, or alkaline wetlands, seasonal and semipermanent Summary: . C. Petersen, and D. M. Roosa. 1984. Iowa...

164

Silica powders for powder evacuated thermal insulating panel and method  

DOE Patents [OSTI]

A powder evacuated thermal insulating panel using generally spherical and porous silica particles of a median size less than about 100 nanometers in diameter, a pour packing density of about 0.4 to 0.6 g/cm{sup 3} and an external surface area in the range of about 90 to 600 m{sup 2}/g is described. The silica powders are prepared by reacting a tetraalkyl silicate with ammonia and water in an alcohol solvent, distilling the solution after the reaction to remove the ammonia and recover the alcohol. The resulting aqueous slurry was dried, ball-milled, and dried again to provide the silica particles with defined internal and external porosity. The nanometer size and the large external surface area of the silica particles along with the internal and external porosity of the silica particles provide powder evacuated thermal insulating panels with significantly higher R-values than obtainable using previously known silica powders. 2 figs.

Harris, M.T.; Basaran, O.A.; Kollie, T.G.; Weaver, F.J.

1996-01-02T23:59:59.000Z

165

Silica powders for powder evacuated thermal insulating panel and method  

DOE Patents [OSTI]

A powder evacuated thermal insulating panel using generally spherical and porous silica particles of a median size less than about 100 nanometers in diameter, a pour packing density of about 0.4 to 0.6 g/cm.sup.3 and an external surface area in the range of about 90 to 600 m.sup.2/ g is described. The silica powders are prepared by reacting a tetraakyl silicate with ammonia and water in an alcohol solvent, distilling the solution after the reaction to remove the ammonia and recover the alcohol. The resulting aqueous slurry was dried, ball-milled, and dried again to provide the silica particles with defined internal and external porosity. The nanometer size and the large external surface area of the silica particles along with the internal and external porosity of the silica particles provide powder evacuated thermal insulating panels with significantly higher R-values than obtainable using previously known silica powders.

Harris, Michael T. (Knoxville, TN); Basaran, Osman A. (Oak Ridge, TN); Kollie, Thomas G. (Oak Ridge, TN); Weaver, Fred J. (Knoxville, TN)

1996-01-01T23:59:59.000Z

166

Silica powders for powder evacuated thermal insulating panel and method  

DOE Patents [OSTI]

A powder evacuated thermal insulating panel using generally spherical and porous silica particles of a median size less than about 100 nanometers in diameter, a pour packing density of about 0.4 to 0.6 g/cm.sup.3 and an external surface area in the range of about 90 to 600 m.sup.2 /g is described. The silica powders are prepared by reacting a tetraakyl silicate with ammonia and water in an alcohol solvent, distilling the solution after the reaction to remove the ammonia and recover the alcohol. The resulting aqueous slurry was dried, ball-milled, and dried again to provide the silica particles with defined internal and external porosity. The nanometer size and the large external surface area of the silica particles along with the internal and external porosity of the silica particles provide powder evacuated thermal insulating panels with significantly higher R-values than obtainable using previously known silica powders.

Harris, Michael T. (Knoxville, TN); Basaran, Osman A. (Oak Ridge, TN); Kollie, Thomas G. (Oak Ridge, TN); Weaver, Fred J. (Knoxville, TN)

1994-01-01T23:59:59.000Z

167

Silica powders for powder evacuated thermal insulating panel and method  

DOE Patents [OSTI]

A powder evacuated thermal insulating panel using generally spherical and porous silica particles of a median size less than about 100 nanometers in diameter, a pour packing density of about 0.4 to 0.6 g/cm.sup.3 and an external surface area in the range of about 90 to 600 m.sup.2/ g is described. The silica powders are prepared by reacting a tetraakyl silicate with ammonia and water in an alcohol solvent, distilling the solution after the reaction to remove the ammonia and recover the alcohol. The resulting aqueous slurry was dried, ball-milled, and dried again to provide the silica particles with defined internal and external porosity. The nanometer size and the large external surface area of the silica particles along with the internal and external porosity of the silica particles provide powder evacuated thermal insulating panels with significantly higher R-values than obtainable using previously known silica powders.

Harris, Michael T. (Knoxville, TN); Basaran, Osman A. (Oak Ridge, TN); Kollie, Thomas G. (Oak Ridge, TN); Weaver, Fred J. (Knoxville, TN)

1995-01-01T23:59:59.000Z

168

Graphene oxide sheets, the chemical exfoliation product of graphite powders and precursor for the bulk production of graphene based materials, are found to be  

E-Print Network [OSTI]

#12;Graphene oxide sheets, the chemical exfoliation product of graphite powders and precursor), is the product of chemical oxidation and exfoliation of graphite powders that was first synthesized over a cen atomic layer of sp2-hybridized carbon atoms (Fig. 1a). In 2004, it was isolated by mechanical exfoliation

Huang, Jiaxing

169

Method and apparatus for the production of metal oxide powder  

DOE Patents [OSTI]

The present invention provides a method for preparing metal oxide powder. A first solution, which is substantially organic, is prepared. A second solution, which is an aqueous solution substantially immiscible in the first solution, is prepared and delivered as drops to the first solution. The drops of the second solution are atomized by a pulsed electric field forming micro-drops of the second solution. Reagents in the first solution diffuse into and react with reactants in the micro-drops of the second solution forming metal hydroxide or oxalate particles. The metal hydroxide or metal oxalate particles are then recovered and dried to produce the metal oxide powder. An apparatus for preparing a metal oxide powder is also disclosed.

Harris, Michael T. (Knoxville, TN); Scott, Timothy C. (Knoxville, TN); Byers, Charles H. (Oak Ridge, TN)

1993-01-01T23:59:59.000Z

170

Method and apparatus for the production of metal oxide powder  

DOE Patents [OSTI]

The present invention provides a method for preparing metal oxide powder. A first solution, which is substantially organic, is prepared. A second solution, which is an aqueous solution substantially immiscible in the first solution, is prepared and delivered as drops to the first solution. The drops of the second solution are atomized by a pulsed electric field forming micro-drops of the second solution. Reagents in the first solution diffuse into and react with reactants in the micro-drops of the second solution forming metal hydroxide or oxalate particles. The metal hydroxide or metal oxalate particles are then recovered and dried to produce the metal oxide powder. An apparatus for preparing a metal oxide powder is also disclosed.

Harris, Michael T. (Knoxville, TN); Scott, Timothy C. (Knoxville, TN); Byers, Charles H. (Oak Ridge, TN)

1992-01-01T23:59:59.000Z

171

Method and apparatus for the production of metal oxide powder  

DOE Patents [OSTI]

The present invention provides a method for preparing metal oxide powder. A first solution, which is substantially organic, is prepared. A second solution, which is an aqueous solution substantially immiscible in the first solution, is prepared and delivered as drops to the first solution. The drops of the second solution are atomized by a pulsed electric field forming micro-drops of the second solution. Reagents in the first solution diffuse into and react with reactants in the micro-drops of the second solution forming metal hydroxide or oxalate particles. The metal hydroxide or metal oxalate particles are then recovered and dried to produce the metal oxide powder. An apparatus for preparing a metal oxide powder is also disclosed. 2 figs.

Harris, M.T.; Scott, T.C.; Byers, C.H.

1992-06-16T23:59:59.000Z

172

Method for molding ceramic powders  

DOE Patents [OSTI]

A method for molding ceramic powders comprises forming a slurry mixture including ceramic powder, a dispersant for the metal-containing powder, and a monomer solution. The monomer solution includes at least one multifunctional monomer, a free-radical initiator, and an organic solvent. The slurry mixture is transferred to a mold, and the mold containing the slurry mixture is heated to polymerize and crosslink the monomer and form a firm polymer-solvent gel matrix. The solid product may be removed from the mold and heated to first remove the solvent and subsequently remove the polymer, where after the product may be sintered.

Janney, M.A.

1990-01-16T23:59:59.000Z

173

Method for molding ceramic powders  

DOE Patents [OSTI]

A method for molding ceramic powders comprises forming a slurry mixture including ceramic powder, a dispersant for the metal-containing powder, and a monomer solution. The monomer solution includes at least one multifunctional monomer, a free-radical initiator, and an organic solvent. The slurry mixture is transferred to a mold, and the mold containing the slurry mixture is heated to polymerize and crosslink the monomer and form a firm polymer-solvent gel matrix. The solid product may be removed from the mold and heated to first remove the solvent and subsequently remove the polymer, whereafter the product may be sintered.

Janney, Mark A. (Knoxville, TN)

1990-01-01T23:59:59.000Z

174

Environmental Assessment for US Department of Energy support of an Iowa State University Linear Accelerator Facility at Ames, Iowa  

SciTech Connect (OSTI)

The proposed Department of Energy (DOE) action is financial and technical support of construction and initial operation of an agricultural commodity irradiator (principally for meat), employing a dual mode electron beam generator capable of producing x-rays, at the Iowa State University Linear Accelerator located at Ames, Iowa. The planned pilot commercial-scale facility would be used for the following activities: conducting irradiation research on agricultural commodities, principally meats; in the future, after the pilot phase, as schedules permit, possibly conducting research on other, non-edible materials; evaluating effects of irradiation on nutritional and sensory quality of agricultural products; demonstrating the efficiency of the process to control or eliminate pathogens, and/or to prolong the commodities' post-harvest shelf-life via control or elimination of bacteria, fungi, and/or insects; providing information to the public on the benefits, safety and risks of irradiated agricultural commodities; determining consumer acceptability of the irradiated products; providing data for use by regulatory agencies in developing protocols for various treatments of Iowa agricultural commodities; and training operators, maintenance and quality control technicians, scientists, engineers, and staff of regulatory agencies in agricultural commodity irradiation technology. 14 refs., 5 figs.

Not Available

1990-05-01T23:59:59.000Z

175

A comparison of Texas and Iowa broodstocks for eastern wild turkey restoration in the Post Oak Savannah of Texas  

E-Print Network [OSTI]

area was stocked with relocated radio-tagged Iowa birds and the other with relocated radio-tagged Texas birds during winter 1996. Mortality, reproduction, and movements were evaluated using radiotelemetry. Annual survival for Iowa hens (juvenile...

Gainey, Jeffery Wayne

2012-06-07T23:59:59.000Z

176

Rotary powder feed through apparatus  

DOE Patents [OSTI]

A device for increasing the uniformity of solids within a solids fabrication system, such as a direct light fabrication (DLF) system in which gas entrained powders are passed through the focal point of a moving high-power light which fuses the particles in the powder to a surface being built up in layers. The invention provides a feed through interface wherein gas entrained powders input from stationary input lines are coupled to a rotating head of the fabrication system. The invention eliminates the need to provide additional slack in the feed lines to accommodate head rotation, and therefore reduces feed line bending movements which induce non-uniform feeding of gas entrained powder to a rotating head.

Lewis, Gary K. (Los Alamos, NM); Less, Richard M. (Los Alamos, NM)

2001-01-01T23:59:59.000Z

177

Neutron detectors comprising boron powder  

SciTech Connect (OSTI)

High-efficiency neutron detector substrate assemblies comprising a first conductive substrate, wherein a first side of the substrate is in direct contact with a first layer of a powder material comprising .sup.10boron, .sup.10boron carbide or combinations thereof, and wherein a conductive material is in proximity to the first layer of powder material; and processes of making said neutron detector substrate assemblies.

Wang, Zhehui; Morris, Christopher; Bacon, Jeffrey Darnell; Makela, Mark F; Spaulding, Randy Jay

2013-05-21T23:59:59.000Z

178

NanoComposite Stainless Steel Powder Technologies  

SciTech Connect (OSTI)

Oak Ridge National Laboratory has been investigating a new class of Fe-based amorphous material stemming from a DARPA, Defense Advanced Research Projects Agency initiative in structural amorphous metals. Further engineering of the original SAM materials such as chemistry modifications and manufacturing processes, has led to the development of a class of Fe based amorphous materials that upon processing, devitrify into a nearly homogeneous distribution of nano sized complex metal carbides and borides. The powder material is produced through the gas atomization process and subsequently utilized by several methods; laser fusing as a coating to existing components or bulk consolidated into new components through various powder metallurgy techniques (vacuum hot pressing, Dynaforge, and hot isostatic pressing). The unique fine scale distribution of microstructural features yields a material with high hardness and wear resistance compared to material produced through conventional processing techniques such as casting while maintaining adequate fracture toughness. Several compositions have been examined including those specifically designed for high hardness and wear resistance and a composition specifically tailored to devitrify into an austenitic matrix (similar to a stainless steel) which poses improved corrosion behavior.

DeHoff, R.; Glasgow, C. (MesoCoat, Inc.)

2012-07-25T23:59:59.000Z

179

High-performance Ni[sub 3]Al synthesized from composite powders  

SciTech Connect (OSTI)

Specimens of Ni[sub 3]Al + B of high density (>99.3 pct RD) and relatively large dimension have been synthesized from composite powders through processes of replacing plating and electroless Ni-B plating on Al powder, sintering, and thermal-mechanical treatment. The uniformly coated Ni layer over fine Al or Ni core particles constituting these coating/core composite powders has advantages such as better resistance to oxidation relative to pure Al powder, a greater green density as a compacted powder than prealloyed powder, the possibility of atomically added B to the material by careful choice of a suitable plating solution, and avoidance of the expensive powder metallurgy (PM) equipment such as a hot isostatic press (HIP), hot press (HP), etc. The final Ni[sub 3]Al + B product is made from Ni-B-Al and Ni-B-Ni mixed composite powders by means of traditional PM processes such as compacting, sintering, rolling, and annealing, and therefore, the dimensions of the product are not constrained by the capacity of an HIP or HP. The properties of Ni[sub 3]Al composite powder metallurgy (CPM) specimens tested at room temperature have been obtained, and comparison with previous reports is conducted. A tensile elongation of about 16 pct at room temperature was attained.

Chiou, W.C.; Hu, C.T. (National Tsing Hua Univ., Hsinchu (Taiwan, Province of China). Dept. of Materials Science and Engineering)

1994-05-01T23:59:59.000Z

180

Iowa State Mining and Mineral Resources Research Institute  

SciTech Connect (OSTI)

This final report describes the activities of the Iowa State Mining and Mineral Resources Research Institute (ISMMRRI) at Iowa State University for the period July 1, 1989, to June 30, 1990. Activities include research in mining- and mineral-related areas, education and training of scientists and engineers in these fields, administration of the Institute, and cooperative interactions with industry, government agencies, and other research centers. During this period, ISMMRRI has supported research efforts to: (1) Investigate methods of leaching zinc from sphalerite-containing ores. (2) Study the geochemistry and geology of an Archean gold deposit and of a gold-telluride deposit. (3) Enchance how-quality aggregates for use in construction. (4) Pre-clean coal by triboelectric charging in a fluidized-bed. (5) Characterize the crystal/grain alignment during processing of yttrium-barium-copper-perovskite (1-2-3) superconductors. (5) Study the fluid inclusion properties of a fluorite district. (6) Study the impacts of surface mining on community planning. (7) Assess the hydrophobicity of coal and pyrite for beneficiation. (8) Investigate the use of photoacoustic absorption spectroscopy for monitoring unburnt carbon in the exhaust gas from coal-fired boilers. The education and training program continued within the interdepartmental graduate minor in mineral resources includes courses in such areas as mining methods, mineral processing, industrial minerals, extractive metallurgy, coal science and technology, and reclamation of mined land. In addition, ISMMRRI hosted the 3rd International Conference on Processing and Utilization of High-Sulfur Coals in Ames, Iowa. The Institute continues to interact with industry in order to foster increased cooperation between academia and the mining and mineral community.

Not Available

1990-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "iowa powder atomization" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Iowa Natural Gas Vehicle Fuel Consumption (Million Cubic Feet)  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30Natural Gas Glossary529 6330 0 14 15 0 0 0YearDecade Year-0 Year-1YearIowa

182

Van Buren County, Iowa: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ < RAPID Jump to:Seadov PtyInformation UCOpen Energy Information Valley View HotValyceumIowa:

183

Warren County, Iowa: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ < RAPID Jump to:Seadov PtyInformationSEDS data JumpWakullaWanxiang ElectricFacility319245°,Iowa:

184

Washington County, Iowa: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ < RAPID Jump to:Seadov PtyInformationSEDS dataIndiana: EnergyWasco County,WashingtonIllinois:Iowa:

185

Webster County, Iowa: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ < RAPID Jump to:Seadov PtyInformationSEDSWawarsing,Webb County, Texas: Energy ResourcesWebergIowa:

186

Black Hawk County, Iowa: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin: Energy ResourcesJersey:form ViewBlack Diamond Power Co JumpHawk County, Iowa:

187

Bremer County, Iowa: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin: EnergyBoston Area Solar EnergyBradbury,BraytonOpen EnergyBremer County, Iowa:

188

Top of Iowa III Wind Farm | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revisionEnvReviewNonInvasiveExplorationUT-gTaguspark JumpDetective: TerminologyTolerableTop Crop WindTop of Iowa

189

St. Ansgar, Iowa: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revisionEnvReviewNonInvasiveExplorationUT-g GrantAtlas (PACA RegionSpringview II Wind ProjectSriAnsgar, Iowa:

190

Madison County, Iowa: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy Resources Jump to:46 - 429Lacey,(MonasterLowell Point,ECO Auger11. It is classifiedMaderaBevington, Iowa

191

Atchison-Holt Electric Coop (Iowa) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating SolarElectricEnergyCT BiomassArnprior, Ontario: EnergyAskja EnergyIowa) Jump to:

192

Solar Panels to Help Iowa Students Learn About Renewable Energy |  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up from the GridwiseSite Management GuideReliabilityDepartment of Energy to Help Iowa

193

Winneshiek County, Iowa: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ < RAPID Jump to:SeadovCooperative JumpWilliamson County,Bay, OR)Winneshiek County, Iowa: Energy Resources

194

Wright County, Iowa: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ < RAPID Jump to:SeadovCooperative JumpWilliamsonWoodson County,Worden, Montana:WorldScan Jump227.Iowa:

195

Polk County, Iowa: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscot County, Maine:Plug Power Inc Jump to:Venture, Texas:617347°,County, Iowa:

196

Johnson County, Iowa: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy Resources Jump to:46 - 429 Throttled (botOpen6 Climate ZoneJerome is aJinlongBargersville, IndianaIowa

197

Allamakee County, Iowa: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300Algoil Jump to: navigation, search Name: AlgoilTypeAllMerus Energy JumpIowa:

198

City of Ames, Iowa (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartmentAUDIT REPORTOpenWendeGuoCatalystPathwaysAltamont City of Place: IllinoisAmes, Iowa

199

Chickasaw County, Iowa: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin:Energy Information onChemithon842667°,Cheviot,3. It isAlta Vista, Iowa

200

City of Anita, Iowa (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin:Energy InformationLake SouthChroma ATEEnergy LLCAlpha,City ofAnita, Iowa

Note: This page contains sample records for the topic "iowa powder atomization" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

City of Bellevue, Iowa (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin:Energy InformationLake SouthChromaIowa (Utility Company) Jump to:

202

City of Carlisle, Iowa (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin:Energy InformationLake SouthChromaIowaCamilla, Georgia (Utility

203

City of Corwith, Iowa (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin:Energy InformationLakeWyoming (Utility Company)Corwith, Iowa (Utility

204

City of Durant, Iowa (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin:Energy InformationLakeWyomingDurant, Iowa (Utility Company) Jump to:

205

City of Earlville, Iowa (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin:Energy InformationLakeWyomingDurant, Iowa (Utility Company) Jump

206

City of Fairbank, Iowa (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin:Energy InformationLakeWyomingDurant, IowaEstelline, South

207

City of Farnhamville, Iowa (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin:Energy InformationLakeWyomingDurant, IowaEstelline,

208

City of Stanhope, Iowa (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin:Energy NebraskaStanhope, Iowa (Utility Company) Jump to: navigation, search

209

City of Wall Lake, Iowa (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin:Energy NebraskaStanhope, Iowa (Utility Company)ThomastonVineland,WakefieldWall

210

City of Wilton, Iowa (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin:Energy NebraskaStanhope, Iowa (UtilityWaseca,Westerville,Wilson, North

211

Clay County, Iowa: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin:EnergyWisconsin: Energy Resources Jump to:Clawson, Michigan:Iowa. Its FIPS

212

Iowa Regions | U.S. DOE Office of Science (SC)  

Office of Science (SC) Website

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched5 IndustrialIsadoreConnecticut Regions National11-12, 2005IdahoIndianaIowa Regions

213

Mechanical Properties of a Metal Powder-Loaded Polyurethane Foam  

SciTech Connect (OSTI)

Quasi-static compression tests have been performed on polyurethane foam specimens. The modulus of the foam exhibited a power-law dependence with respect to density of the form: E* {proportional_to} {rho}*{sup n}, where n = 1.7. The modulus data is well described by a simple geometric model (attributed to the work of Gibson and Ashby) for closed-cell foam in which the stiffness of the foam is governed by the flexure of the cell struts and cell walls. The compressive strength of the foam is also found to follow a power-law behavior with respect to foam density. In this instance, Euler buckling is used to rationalize the density dependence. The modulus of the polyurethane foam was modified by addition of a gas atomized, spherical aluminum powder. Additions of 30 and 50 weight percent of the powder significantly increased the foam modulus. However, there were only slight increases in modulus with 5 and 10 weight percent additions of the metal powder. Strength was also slightly increased at high loading fractions of powder. This increase in modulus and strength could be predicted by combining the above geometric model with a well-known model describing the effect on modulus of a rigid dispersoid in a compliant matrix.

C. L. Neuschwanger; L. L. Whinnery; S. H. Goods

1999-04-01T23:59:59.000Z

214

Plasma synthesis of lithium based intercalation powders for solid polymer electrolyte batteries  

DOE Patents [OSTI]

The invention relates to a process for preparing lithium intercalation compounds by plasma reaction comprising the steps of: forming a feed solution by mixing lithium nitrate or lithium hydroxide or lithium oxide and the required metal nitrate or metal hydroxide or metal oxide and between 10-50% alcohol by weight; mixing the feed solution with O.sub.2 gas wherein the O.sub.2 gas atomizes the feed solution into fine reactant droplets, inserting the atomized feed solution into a plasma reactor to form an intercalation powder; and if desired, heating the resulting powder to from a very pure single phase product.

Kong, Peter C. (Idaho Falls, ID); Pink, Robert J. (Pocatello, ID); Nelson, Lee O. (Idaho Falls, ID)

2005-01-04T23:59:59.000Z

215

Intradermal needle-free powdered drug injection  

E-Print Network [OSTI]

This thesis presents a new method for needle-free powdered drug injection. The design, construction, and testing of a bench-top helium-powered device capable of delivering powder to controllable depths within the dermis ...

Liu, John (John Hsiao-Yung)

2012-01-01T23:59:59.000Z

216

Iowa state information handbook: formerly utilized sites remedial action program  

SciTech Connect (OSTI)

This volume is one of a series produced under contract with the DOE, By Politech Corporation to develop a legislative and regulatory data base to assist the FUSRAP management in addressing the institutional and socioeconomic issues involved in carrying out the Formerly Utilized Sites Remedial Action Program. This Information Handbook series contains information about all relevant government agencies at the Federal and state levels, the pertinent programs they administer, each affected state legislature, and current Federal and state legislative and regulatory initiatives. This volume is a compilation of information about the state of Iowa. It contains: a description of the state executive branch structure; a summary of relevant state statutes and regulations; a description of the structure of the state legislature, identification of the officers and committee chairmen, and a summary of recent relevant legislative action; the full test of relevant statutes and regulations.

None

1981-02-09T23:59:59.000Z

217

Cost-Effectiveness of ASHRAE Standard 90.1-2010 for the State of Iowa  

SciTech Connect (OSTI)

Moving to the ANSI/ASHRAE/IES Standard 90.1-2010 version from the Base Code (90.1-2007) is cost-effective for all building types and climate zones in the State of Iowa.

Hart, Philip R.; Rosenberg, Michael I.; Xie, YuLong; Zhang, Jian; Richman, Eric E.; Elliott, Douglas B.; Loper, Susan A.; Myer, Michael

2013-11-01T23:59:59.000Z

218

Aggregating suburbia : digital information storage as catalyst to intensify urbanity in suburban Iowa  

E-Print Network [OSTI]

America's Midwest experienced its most rapid growth after the age of industrialization, stretching the suburban landscape beyond our wildest imagination, to a state of ubiquity. In the case of Iowa, this suburbanization ...

Bindner, Matthew J. (Matthew James)

2011-01-01T23:59:59.000Z

219

Top U.S. Energy Department Official Visits Iowa, Calls on Congress...  

Energy Savers [EERE]

the wind energy supply chain in Iowa. Acciona Windpower produces 1.5 MW and 3.0 MW wind turbines. At its West Branch assembly plant, the company sources over 80 percent of its...

220

E-Print Network 3.0 - ames iowa date Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Page: << < 1 2 3 4 5 > >> 1 Abstract Submitted for the MAR07 Meeting of Summary: & Astronomy, Iowa State University, Ames IA, T.J. WILLIAMS, Ames Laboratoty, Ames IA, D.A....

Note: This page contains sample records for the topic "iowa powder atomization" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

The Effects of Implicit and Explicit Memory on Iowa Gambling Task Performance   

E-Print Network [OSTI]

The Iowa Gambling Task (IGT) has repeatedly been used to show that damage to the prefrontal cortex causes deficits in decision making ability (Bechara, Damasio, Damasio & Anderson, 1994). There is currently a lack of ...

Crimmens, Alex

2008-06-27T23:59:59.000Z

222

Making Stuff Outreach at the Ames Laboratory and Iowa State University  

SciTech Connect (OSTI)

The U. S. Department of Energy's Ames Laboratory in Ames, Iowa was a coalition partner for outreach activities connected with NOVA's Making Stuff television series on PBS. Volunteers affiliated with the Ames Laboratory and Iowa State University, with backgrounds in materials science, took part in activities including a science-themed Family Night at a local mall, Science Cafes at the Science Center of Iowa, teacher workshops, demonstrations at science nights in elementary and middle schools, and various other events. We describe a selection of the activities and present a summary of their outcomes and extent of their impact on Ames, Des Moines and the surrounding communities in Iowa. In Part 2, results of a volunteer attitude survey are presented, which shed some light on the volunteer experience and show how the volunteers participation in outreach activities has affected their views of materials education.

Ament, Katherine; Karsjen, Steven; Leshem-Ackerman, Adah; King, Alexander

2011-04-01T23:59:59.000Z

223

Basket of Energy Benefits for Iowa: Weatherization Assistance Close-Up Fact Sheet  

SciTech Connect (OSTI)

Iowa demonstrates its commitment to technology and efficiency through the Weatherization Program. Weatherization uses advanced technologies and techniques to reduce energy costs for low-income families by increasing the energy efficiency of their homes.

D& R International

2001-10-10T23:59:59.000Z

224

Description of Alethopteris from the Williamson #3 Mine, Lucas County, Iowa: anatomical variation, diversity, paleoecology  

E-Print Network [OSTI]

For more than 100 years, Pennsylvanian permineralized peats have been studied for their exceptionally preserved plant remains. Late Atokan-early Desmoinesian coal balls from the Williamson # 3 deposit in south-central Iowa were preserved...

Slone, Elizabeth Dunbar Jones

2004-09-30T23:59:59.000Z

225

MESOSCALE SIMULATIONS OF POWDER COMPACTION  

SciTech Connect (OSTI)

Mesoscale 3D simulations of shock compaction of metal and ceramic powders have been performed with an Eulerian hydrocode GEODYN. The approach was validated by simulating a well-characterized shock compaction experiment of a porous ductile metal. Simulation results using the Steinberg material model and handbook values for solid 2024 aluminum showed good agreement with experimental compaction curves and wave profiles. Brittle ceramic materials are not as well studied as metals, so a simple material model for solid ceramic (tungsten carbide) has been calibrated to match experimental compaction curves. Direct simulations of gas gun experiments with ceramic powders have been performed and showed good agreement with experimental data. The numerical shock wave profile has same character and thickness as that measured experimentally using VISAR. The numerical results show reshock states above the single-shock Hugoniot line as observed in experiments. We found that for good quantitative agreement with experiments 3D simulations are essential.

Lomov, Ilya; Fujino, Don; Antoun, Tarabay; Liu, Benjamin [Lawrence Livermore National Laboratory, P. O. Box 808, Livermore CA 94551 (United States)

2009-12-28T23:59:59.000Z

226

Gas Atomization of Stainless Steel - Slow Motion  

SciTech Connect (OSTI)

Stainless steel liquid atomized by supersonic argon gas into a spray of droplets at ~1800ºC. Atomization of metal requires high pressure gas and specialized chambers for cooling and collecting the powders without contamination. The critical step for morphological control is the impingement of the gas on the melt stream. The video is a black and white high speed video of a liquid metal stream being atomized by high pressure gas. This material was atomized at the Ames Laboratory's Materials Preparation Center http://www.mpc.ameslab.gov

None

2011-01-01T23:59:59.000Z

227

The Prairie Naturalist 42(3/4):130137; 2010 Present address: Iowa DNR Mississippi Monitoring Station, 206 Rose Street, Bellevue, Iowa 52031  

E-Print Network [OSTI]

of white bass population dynamics and their role in fish communities that is necessary for successful Station, 206 Rose Street, Bellevue, Iowa 52031 Population and Diet Assessment of White Bass in Lake Sharpe 57007 (AEA, TWS, MRW, DWW) ABSTRACT White bass (Morone chrysops) have been introduced into all 4 South

228

High Pressure Neutron Powder Diffraction Study of Superhydrated Natrolite  

SciTech Connect (OSTI)

Neutron powder diffraction data were collected on a sample of natrolite and a 1:1 (v/v) mixture of perdeuterated methanol and water at a pressure of 1.87(11) GPa. The natrolite sample was superhydrated, with a water content double that observed at ambient pressure. All of the water deuterium atoms were located and the nature and extent of the hydrogen bonding elucidated for the first time. This has allowed the calculation of bond valence sums for the water oxygen atoms, and from this, it can be deduced that the key energetic factor leading to loss of the additional water molecule upon pressure release is the poor coordination to sodium cations within the pores.

Colligan,M.; Lee, Y.; Vogt, T.; Celestian, A.; Parise, J.; Marshall, W.; Hriljac, J.

2005-01-01T23:59:59.000Z

229

Process for the synthesis of iron powder  

DOE Patents [OSTI]

A process for preparing iron powder suitable for use in preparing the iron-potassium perchlorate heat-powder fuel mixture used in thermal batteries, comprises preparing a homogeneous, dense iron oxide hydroxide precipitate by homogeneous precipitation from an aqueous mixture of a ferric salt, formic or sulfuric acid, ammonium hydroxide and urea as precipitating agent; and then reducing the dense iron oxide hydroxide by treatment with hydrogen to prepare the iron powder. 2 figs.

Welbon, W.W.

1983-11-08T23:59:59.000Z

230

Process for the synthesis of iron powder  

DOE Patents [OSTI]

A process for preparing iron powder suitable for use in preparing the iron-potassium perchlorate heat-powder fuel mixture used in thermal batteries, comprises preparing a homogeneous, dense iron oxide hydroxide precipitate by homogeneous precipitation from an aqueous mixture of a ferric salt, formic or sulfuric acid, ammonium hydroxide and urea as precipitating agent; and then reducing the dense iron oxide hydroxide by treatment with hydrogen to prepare the iron powder.

Not Available

1982-03-06T23:59:59.000Z

231

Hadronic Atoms  

E-Print Network [OSTI]

We review the theory of hadronic atoms in QCD+QED. The non-relativistic effective Lagrangian approach, used to describe this type of bound states, is illustrated with the case of pi+pi- atoms. In addition, we discuss the evaluation of isospin-breaking corrections to hadronic atom observables by invoking chiral perturbation theory.

J. Gasser; V. E. Lyubovitskij; A. Rusetsky

2009-03-02T23:59:59.000Z

232

Thermal evolution behavior of carbides and {gamma} Prime precipitates in FGH96 superalloy powder  

SciTech Connect (OSTI)

The characteristics of rapidly solidified FGH96 superalloy powder and the thermal evolution behavior of carbides and {gamma} Prime precipitates within powder particles were investigated. It was observed that the reduction of powder size and the increase of cooling rate had transformed the solidification morphologies of atomized powder from dendrite in major to cellular structure. The secondary dendritic spacing was measured to be 1.02-2.55 {mu}m and the corresponding cooling rates were estimated to be in the range of 1.4 Multiplication-Sign 10{sup 4}-4.7 Multiplication-Sign 10{sup 5} K{center_dot}s{sup -1}. An increase in the annealing temperature had rendered the phase transformation of carbides evolving from non-equilibrium MC Prime carbides to intermediate transition stage of M{sub 23}C{sub 6} carbides, and finally to thermodynamically stable MC carbides. The superfine {gamma} Prime precipitates were formed at the dendritic boundaries of rapidly solidified superalloy powder. The coalescence, growth, and homogenization of {gamma}' precipitates occurred with increasing annealing temperature. With decreasing cooling rate from 650 Degree-Sign C{center_dot}K{sup -1} to 5 Degree-Sign C{center_dot}K{sup -1}, the morphological development of {gamma} Prime precipitates had been shown to proceed from spheroidal to cuboidal and finally to solid state dendrites. Meanwhile, a shift had been observed from dendritic morphology to recrystallized structure between 900 Degree-Sign C and 1050 Degree-Sign C. Moreover, accelerated evolution of carbides and {gamma}' precipitates had been facilitated by the formation of new grain boundaries which provide fast diffusion path for atomic elements. - Highlights: Black-Right-Pointing-Pointer Microstructural characteristic of FGH96 superalloy powder was investigated. Black-Right-Pointing-Pointer The relation between microstructure, particle size, and cooling rate was studied. Black-Right-Pointing-Pointer Thermal evolution behavior of {gamma} Prime and carbides in loose FGH96 powder was studied.

Zhang Lin, E-mail: zhanglincsu@163.com [State Key Laboratory for Advanced Metals and Materials, Beijing Key Laboratory for Powder Metallurgy and Particulate Materials, University of Science and Technology Beijing, Beijing, 100083 (China); Liu Hengsan, E-mail: lhsj63@sohu.com [State Key Laboratory for Advanced Metals and Materials, Beijing Key Laboratory for Powder Metallurgy and Particulate Materials, University of Science and Technology Beijing, Beijing, 100083 (China); He Xinbo, E-mail: xb_he@163.com [State Key Laboratory for Advanced Metals and Materials, Beijing Key Laboratory for Powder Metallurgy and Particulate Materials, University of Science and Technology Beijing, Beijing, 100083 (China); Rafi-ud-din, E-mail: rafiuddi@gmail.com [State Key Laboratory for Advanced Metals and Materials, Beijing Key Laboratory for Powder Metallurgy and Particulate Materials, University of Science and Technology Beijing, Beijing, 100083 (China); Qu Xuanhui, E-mail: quxh@ustb.edu.cn [State Key Laboratory for Advanced Metals and Materials, Beijing Key Laboratory for Powder Metallurgy and Particulate Materials, University of Science and Technology Beijing, Beijing, 100083 (China); Qin Mingli, E-mail: mlqin75@hotmail.com [State Key Laboratory for Advanced Metals and Materials, Beijing Key Laboratory for Powder Metallurgy and Particulate Materials, University of Science and Technology Beijing, Beijing, 100083 (China); Li Zhou, E-mail: zhouli621@126.com [National Key Lab of High Temperature Structural Materials, Beijing Institute of Aeronautical Materials, Beijing, 100095 (China); Zhang Guoqing, E-mail: g.zhang@126.com [National Key Lab of High Temperature Structural Materials, Beijing Institute of Aeronautical Materials, Beijing, 100095 (China)

2012-05-15T23:59:59.000Z

233

Thermal plasma chemical synthesis of powders  

SciTech Connect (OSTI)

Thermal plasma processing has been increasingly used to synthesize submicron powders of high-purity ceramics and metals. The high temperatures generated with the plasma provide a vapor phase reaction zone for elements with high boiling points and refractory materials. An overview is presented on the general plasma technology used in synthesis and on the properties of plasma powders.

Vogt, G.J.; Newkirk, L.R.

1985-01-01T23:59:59.000Z

234

Wet powder seal for gas containment  

DOE Patents [OSTI]

A gas seal is formed by a compact layer of an insoluble powder and liquid filling the fine interstices of that layer. The smaller the particle size of the selected powder, such as sand or talc, the finer will be the interstices or capillary spaces in the layer and the greater will be the resulting sealing capacity, i.e., the gas pressure differential which the wet powder layer can withstand. Such wet powder seal is useful in constructing underground gas reservoirs or storage cavities for nuclear wastes as well as stopping leaks in gas mains buried under ground or situated under water. The sealing capacity of the wet powder seal can be augmented by the hydrostatic head of a liquid body established over the seal.

Stang, Louis G. (Sayville, NY)

1982-01-01T23:59:59.000Z

235

Poweshiek County, Iowa: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscot County, Maine:Plug Power IncPowder River EnergyCube PvtPoweronicks LtdPoweshiek

236

LIQUID PHASE SINTERING OF IRON WITH COPPER BASE ALLOY POWDERS  

E-Print Network [OSTI]

Symposium on Powder Metallurgy - The Iron and Steel Inst.a Liquid Phase", Powder Metallurgy, 17 (33), 227 (1974). H.Other made by powder metallurgy techniques. ses to produce

Chen, M.-H.

2010-01-01T23:59:59.000Z

237

Electrochemical Studies of Packed Iron Powder Electrodes: Effects...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

of Packed Iron Powder Electrodes: Effects of Common Constituents of Natural Waters on Corrosion Electrochemical Studies of Packed Iron Powder Electrodes: Effects of Common...

238

Cedar River, Cedar Rapids, Iowa Flood Risk Management Feasibility Study Report with Integrated Environmental Assessment  

E-Print Network [OSTI]

of Engineers (USACE) has developed a plan for the flood risk management for the Cedar River, Cedar Rapids, Iowa all 12 comments. 1. IEPR Comment - High Significance: The analysis of existing cultural resources Resources was revised to explain why the resolution of the cultural resources will not exceed the budgeted

US Army Corps of Engineers

239

Impact of Wind Farms on Birds and Bats in Iowa Principal Investigator: Stephen J. Dinsmore  

E-Print Network [OSTI]

Impact of Wind Farms on Birds and Bats in Iowa Principal Investigator: Stephen J. Dinsmore of Natural Resources, State Wildlife Grant Goals and Objectives: Document bird use at wind farm of bird community responses at wind farms and paired control sites. This will produce a measure

Koford, Rolf R.

240

2/27/2013 Page 1 of 8 Comparing the Stock Market and Iowa Land Values  

E-Print Network [OSTI]

is to examine the question; Which is a better investment--the stock market or farmland? Iowa farmland values provided the better investment, this paper compares and contrasts the returns to farmland and the stock is yearly returns. Owning land has an unavoidable annual ownership cost not associated with stocks. Property

Duffy, Michael D.

Note: This page contains sample records for the topic "iowa powder atomization" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Board of Regents, State of Iowa Annual Listing of Academic Programs Reviewed  

E-Print Network [OSTI]

Board of Regents, State of Iowa Annual Listing of Academic Programs Reviewed THE PURPOSE of the reviews is on assessing the teaching and learning processes, and on the collection and utilization ___________________________________________________________________________ 2a. List title and degree level(s) of the program reviewed

Vaswani, Namrata

242

A Multiscale Investigation of Ground Water Flow at Clear Lake, Iowa  

E-Print Network [OSTI]

targets. The model produced ground water inflow and outflow rates of 14,300 and 9200 m3/d, respectively­related problems in the lake and its water- shed, their likely causes, and potential remedial measuresA Multiscale Investigation of Ground Water Flow at Clear Lake, Iowa by William W. Simpkins Abstract

Simpkins, William W.

243

A Survey of Methods For Analyzing and Improving GPU Energy Sparsh Mittal, Iowa State University  

E-Print Network [OSTI]

A A Survey of Methods For Analyzing and Improving GPU Energy Efficiency Sparsh Mittal, Iowa State., 2 Penn Plaza, Suite 701, New York, NY 10121-0701 USA, fax +1 (212) 869-0481, or permissions led to dramatic increase in their power consumption. This paper surveys research works on analyzing

244

NANOMATERIALS FOR HIGH CAPACITY LI-ION BATTERIES Taylor Grieve, Iowa State University, SURF 2009 Fellow  

E-Print Network [OSTI]

NANOMATERIALS FOR HIGH CAPACITY LI-ION BATTERIES Taylor Grieve, Iowa State University, SURF 2009 energy storage devices continues to grow. Lithium-ion (Li-ion) secondary, or renewable, batteries are of interest due to their high energy and power characteristics. Performance enhancements of Li- ion batteries

Li, Mo

245

The 2007/08 Iowa Grain and Biofuel Flow Study: A Survey Report  

E-Print Network [OSTI]

by the expanding production of biofuels, the linkage between the agricultural and energy markets is evolvingThe 2007/08 Iowa Grain and Biofuel Flow Study: A Survey Report Tun-Hsiang (Edward) Yu and Chad Hart: www.card.iastate.edu. Permission is granted to excerpt or quote this information with appropriate

Grissino-Mayer, Henri D.

246

he Iowa State University Climate Science Initiative (CSI) is established in response to  

E-Print Network [OSTI]

resources of soil and water and their role in food (and now fuel) production, cli- mate change is a quintessential land-grant-univer- sity research issue. Iowa State University with its wide range of exper- tise. This initiative complements and draws synergy from recent University focused attention to biofuels, basic plant

Debinski, Diane M.

247

Continuous blending of dry pharmaceutical powders  

E-Print Network [OSTI]

Conventional batch blending of pharmaceutical powders coupled with long quality analysis times increases the production cycle time leading to strained cash flows. Also, scale-up issues faced in process development causes ...

Pernenkil, Lakshman

2008-01-01T23:59:59.000Z

248

Biaxially textured articles formed by powder metallurgy  

DOE Patents [OSTI]

A biaxially textured alloy article comprises Ni powder and at least one powder selected from the group consisting of Cr, W, V, Mo, Cu, Al, Ce, YSZ, Y, Rare Earths, (RE), MgO, CeO.sub.2, and Y.sub.2 O.sub.3 ; compacted and heat treated, then rapidly recrystallized to produce a biaxial texture on the article. In some embodiments the alloy article further comprises electromagnetic or electro-optical devices and possesses superconducting properties.

Goyal, Amit (Knoxville, TN); Williams, Robert K. (Knoxville, TN)

2001-01-01T23:59:59.000Z

249

Synthesis and processing of monosized oxide powders  

DOE Patents [OSTI]

Uniform-size, high-purity, spherical oxide powders are formed by hydrolysis of alkoxide precursors in dilute alcoholic solutions. Under controlled conditions (concentrations of 0.03 to 0.2 M alkoxide and 0.2 to 1.5 M water, for example) oxide particles on the order of about 0.05 to 0.7 micron can be produced. Methods of doping such powders and forming sinterable compacts are also disclosed.

Barringer, Eric A. (Waltham, MA); Fegley, Jr., M. Bruce (Waban, MA); Bowen, H. Kent (Belmont, MA)

1985-01-01T23:59:59.000Z

250

Tantalum powder consolidation, modeling and properties  

SciTech Connect (OSTI)

A systematic approach was taken to investigate the consolidation of tantalum powders. The effects of sinter time, temperature and ramp rate; hot isostatic pressing (HIP) temperature and time; and powder oxygen content on consolidation density, kinetics, microstructure, crystallographic texture, and mechanical properties have been evaluated. In general, higher temperatures and longer hold times resulted in higher density compacts with larger grain sizes for both sintering and HIP`ing. HIP`ed compacts were consistently higher in density than sintered products. The higher oxygen content powders resulted in finer grained, higher density HIP`ed products than the low oxygen powders. Texture analysis showed that the isostatically processed powder products demonstrated a near random texture. This resulted in isotropic properties in the final product. Mechanical testing results showed that the HIP`ed powder products had consistently higher flow stresses than conventionally produced plates, and the sintered compacts were comparable to the plate material. A micromechanics model (Ashby HIP model) has been employed to predict the mechanisms active in the consolidation processes of cold isostatic pressing (CIP), HIP and sintering. This model also predicts the density of the end product and whether grain growth should be expected under the applied processing conditions.

Bingert, S.R.; Vargas, V.D.; Sheinberg, H.C.

1996-10-01T23:59:59.000Z

251

The Potential For Energy Efficiency In The State of Iowa  

SciTech Connect (OSTI)

The purpose of this study was to do an initial estimate of the potential for energy savings in the state of Iowa. Several methods for determining savings were examined, including existing programs, surveys, savings calculators, and economic simulation. Each method has advantages and disadvantages, trading off between detail of information, accuracy of results, and scope. This paper concentrated on using economic simulation (the NEMS model (EIA 2000a)) to determine market potential for energy savings for the residential and commercial sectors. The results of surveys were used to calculate the economic potential for savings in the industrial sector. The NEMS model is used by the Energy Information Administration to calculate twenty-year projections of energy use for every region of the country. The results of the Annual Energy Outlook 2000 were used as the Base case (EIA 1999a). Two alternative cases were created to simulate energy savings policies. Voluntary, market-related programs were simulated by lowering the effective discount rates that end-users use when making decisions on equipment purchases. Standards programs in the residential sector were simulated by eliminating the availability of low efficiency equipment in future years. The parameters for these programs were based on the Moderate scenario from the DOE Clean Energy Futures study (Interlaboratory Working Group 2000), which assumed increased concern by society on energy efficiency but not to the point of fiscal policies such as taxes or direct subsidies. The study only considered a subset of the various programs, policies, and technologies that could reduce energy use. The major end-uses in the residential sector affected by the policies were space cooling (20% savings by 2020) and water heating (14% savings by 2020.) Figure S-1 shows the space cooling savings when voluntary programs and minimum efficiency standards were implemented. Refrigerators, freezers, and clothes dryers saw slight improvements. The study did not involve changes to the building shell (e.g., increased insulation) or residential lighting improvements. Nevertheless, the residential sector's market potential for electrical energy savings was calculated to be 5.3% of expected electrical use, representing 850 GWh by 2020. Natural gas savings could be 2.4% of expected gas use, representing 2.1 trillion Btus. Using expected prices for energy in that year, these represent savings of $47 million and $12 million per year. In the commercial sector, the study only considered voluntary market-based policies for some of the technologies. The most notable savings were in ventilation (12% savings by 2020), lighting (12% savings), refrigeration (7% savings), water heating (6% savings), and space heating (5% savings by 2020). The commercial sector's market potential for electrical energy savings based on the programs modeled was calculated to be 5.1% of its total expected electrical use, representing 605 GWh of power by 2020. Natural gas savings were 2.3 trillion Btu, 3.7% of use. Using the same prices as the residential sector (5.5{cents}/kWh and $5.74/MBtu), the savings represent $33 million and $13 million per year, respectively.

Hadley, SW

2001-12-05T23:59:59.000Z

252

Slip casting nano-particle powders for making transparent ceramics  

DOE Patents [OSTI]

A method of making a transparent ceramic including the steps of providing nano-ceramic powders in a processed or unprocessed form, mixing the powders with de-ionized water, the step of mixing the powders with de-ionized water producing a slurry, sonifing the slurry to completely wet the powder and suspend the powder in the de-ionized water, separating very fine particles from the slurry, molding the slurry, and curing the slurry to produce the transparent ceramic.

Kuntz, Joshua D. (Livermore, CA); Soules, Thomas F. (Livermore, CA); Landingham, Richard Lee (Livermore, CA); Hollingsworth, Joel P. (Oakland, CA)

2011-04-12T23:59:59.000Z

253

Atom Interferometry  

ScienceCinema (OSTI)

Atom de Broglie wave interferometry has emerged as a tool capable of addressing a diverse set of questions in gravitational and condensed matter physics, and as an enabling technology for advanced sensors in geodesy and navigation. This talk will review basic principles, then discuss recent applications and future directions. Scientific applications to be discussed include measurement of G (Newton?s constant), tests of the Equivalence Principle and post-Newtonian gravity, and study of the Kosterlitz-Thouless phase transition in layered superfluids. Technology applications include development of precision gryoscopes and gravity gradiometers. The talk will conclude with speculative remarks looking to the future: Can atom interference methods be sued to detect gravity waves? Can non-classical (entangled/squeezed state) atom sources lead to meaningful sensor performance improvements?

Mark Kasevich

2010-01-08T23:59:59.000Z

254

Biaxially textured articles formed by powder metallurgy  

DOE Patents [OSTI]

A strengthened, biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed, compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of: Ni, Ag, Ag--Cu, Ag--Pd, Ni--Cu, Ni--V, Ni--Mo, Ni--Al, Ni--Cr--Al, Ni--W--Al, Ni--V--Al, Ni--Mo--Al, Ni--Cu--Al; and at least one fine metal oxide powder; the article having a grain size which is fine and homogeneous; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

2003-10-21T23:59:59.000Z

255

Dry powder mixes comprising phase change materials  

DOE Patents [OSTI]

A free flowing, conformable powder-like mix of silica particles and a phase change material (PCM) is provided. The silica particles have a critical size of about 0.005 to about 0.025 microns and the PCM must be added to the silica in an amount of 75% or less PCM per combined weight of silica and PCM. The powder-like mix can be used in tableware items, medical wraps, tree wraps, garments, quilts and blankets, and particularly in applications for heat protection for heat sensitive items, such as aircraft flight recorders, and for preventing brake fade in automobiles, buses, trucks and aircraft.

Salyer, Ival O. (Dayton, OH)

1995-01-01T23:59:59.000Z

256

Dry powder mixes comprising phase change materials  

DOE Patents [OSTI]

A free flowing, conformable powder-like mix of silica particles and a phase change material (PCM) is provided. The silica particles have a critical size of about 0.005 to about 0.025 microns and the PCM must be added to the silica in an amount of 75% or less PCM per combined weight of silica and PCM. The powder-like mix can be used in tableware items, medical wraps, tree wraps, garments, quilts and blankets, and particularly in applications for heat protection for heat sensitive items, such as aircraft flight recorders, and for preventing brake fade in automobiles, buses, trucks and aircraft. 3 figs.

Salyer, I.O.

1995-12-26T23:59:59.000Z

257

Dry powder mixes comprising phase change materials  

DOE Patents [OSTI]

A free flowing, conformable powder-like mix of silica particles and a phase change material (PCM) is provided. The silica particles have a critical size of about 0.005 to about 0.025 microns and the PCM must be added to the silica in an amount of 75% or less PCM per combined weight of silica and PCM. The powder-like mix can be used in tableware items, medical wraps, tree wraps, garments, quilts and blankets, and particularly in applications for heat protection for heat sensitive items, such as aircraft flight recorders, and for preventing brake fade in automobiles, buses, trucks and aircraft. 3 figures.

Salyer, I.O.

1994-12-06T23:59:59.000Z

258

Dry powder mixes comprising phase change materials  

DOE Patents [OSTI]

A free flowing, conformable powder-like mix of silica particles and a phase change material (PCM) is provided. The silica particles have a critical size of about 0.005 to about 0.025 microns and the PCM must be added to the silica in an amount of 75% or less PCM per combined weight of silica and PCM. The powder-like mix can be used in tableware items, medical wraps, tree wraps, garments, quilts and blankets, and particularly in applications for heat protection for heat sensitive items, such as aircraft flight recorders, and for preventing brake fade in automobiles, buses, trucks and aircraft.

Salyer, Ival O. (Dayton, OH)

1994-01-01T23:59:59.000Z

259

Pumped Storage Hydropower (Project Development Support)—Geotechnical Investigation and Value Stream Analysis for the Iowa Hill Pumped-Storage Development  

Broader source: Energy.gov [DOE]

Pumped Storage Hydropower (Project Development Support)—Geotechnical Investigation and Value Stream Analysis for the Iowa Hill Pumped-Storage Development

260

Characterizations of WC-10Co nanocomposite powders and subsequently sinterhip sintered cemented carbide  

SciTech Connect (OSTI)

Ultrafine WC-Co cemented carbides, combining high hardness and high toughness, are expected to find broad applications. In this study, WC-10Co-0.4VC-0.4Cr{sub 3}C{sub 2} (wt.%) nanocomposite powders, whose average grain size was about 30 nm, were fabricated by spray pyrolysis-continuous reduction and carbonization technology. The as-prepared nanocomposite powders were characterized and analyzed by chemical methods, scanning electron microscopy (SEM), transmission electron microscopy (TEM), BET analysis and atomic force microscopy (AFM). Furthermore, 'sinterhip' was used in the sintering process, by which ultrafine WC-10Co cemented carbides with an average grain size of 240 nm were prepared. The material exhibited high Rockwell A hardness of HRA 92.8, Vickers hardness HV{sub 1} 1918, and transverse rapture strength (TRS) of 3780 MPa. The homogeneously dispersed grain growth inhibitors such as VC, Cr{sub 3}C{sub 2} in nanocomposite powder and the special nonmetal-metal nanocomposite structure of WC-10Co nanocomposite powder played very important roles in obtaining ultrafine WC-10Co cemented carbide with the desired properties and microstructure. There was an abundance of triple junctions in the ultrafine WC-10Co cemented carbide; these triple junctions endowed the sintered specimen with high mechanical properties.

Shi, X.L. [State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, 122Luoshi Road, Wuhan 430070 (China)]. E-mail: sxl071932@126.com; Shao, G.Q. [State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, 122Luoshi Road, Wuhan 430070 (China); Duan, X.L. [State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, 122Luoshi Road, Wuhan 430070 (China); Xiong, Z. [State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, 122Luoshi Road, Wuhan 430070 (China); Yang, H. [State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, 122Luoshi Road, Wuhan 430070 (China)

2006-12-15T23:59:59.000Z

Note: This page contains sample records for the topic "iowa powder atomization" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

AN INVESTIGATION OF A THERMOPLASTIC-POWDER METALLURGY PROCESS FOR THE FABRICATION OF POROUS NIOBIUM RODS  

E-Print Network [OSTI]

Compositions, Powder Metallurgy, Vol. 8, No. 16, 1965. W.THERMOPLASTIC- POWDER METALLURGY PROCESS FOR THE FABRICATIONTHERMOPLASTIC- POWDER METALLURGY PROCESS FOR THE FABRICATION

Nordin, Dennis R.

2011-01-01T23:59:59.000Z

262

Development and Testing of a BI-2212 Textured Powder Conductor  

E-Print Network [OSTI]

for Praxair powder in a 500 cP epoxy. .................................................................................................................. 23 Fig. 8: Texture vs. time for various epoxy and powder combinations. All data from an 8.9 T applied...

Damborsky, Kyle

2014-03-10T23:59:59.000Z

263

SIS a new SFF method based on powder  

E-Print Network [OSTI]

. This approach, used by SLS and 3D printing, is able to create thin and uniformly dense powder layers. Other

Asiabanpour, Bahram - Department of Engineering and Technology, Texas State University

264

Modelling the mechanical behaviour of pharmaceutical powders during compaction  

E-Print Network [OSTI]

are made of dry powder through a powder compaction process. In the pharmaceutical industry, billionsModelling the mechanical behaviour of pharmaceutical powders during compaction C.-Y. Wua,T, O.M. Ruddyb , A.C. Benthamb , B.C. Hancockc , S.M. Besta , J.A. Elliotta a Pfizer Institute for Pharmaceutical

Elliott, James

265

Thermite powder ignition by localized microwaves Yehuda Meir, Eli Jerby  

E-Print Network [OSTI]

- propagating high-temperature synthesis (SHS) for sintering of ceramic composites [14]. The magnetic (H, the microwave energy is supplied locally to the powder. It creates a confined hotspot, and initiates a self-propagating the powder prior to its ignition is simulated theoretically, taking into account the powder's temperature

Jerby, Eli

266

Leopold Center for Sustainable Agriculture, 209 Curtiss Hall, Iowa State University, Ames, IA 50011 Get this newsletter every month by e-mail -sign up on the web: www.leopold.iastate.edu/forms/mailing.php  

E-Print Network [OSTI]

Faux of Tripoli are assessing their 14-acre vegetable and poultry farm for solar power. The group this year, will coordinate the new Local Food and Farm Initiative for Iowa. Funds for the first year, and was recommended in the Iowa Local Food and Farm Plan prepared for the Iowa Legislature by the Leopold Center

Debinski, Diane M.

267

Y. Onel, CALOR2006, ChicagoY. Onel, CALOR2006, Chicago 1THE UNIVERSITY OF IOWATHE UNIVERSITY OF IOWA Radiation-Hard Quartz Cerenkov  

E-Print Network [OSTI]

, CALOR2006, Chicago 4THE UNIVERSITY OF IOWATHE UNIVERSITY OF IOWA Quartz Radiation Damage · Scientific literature about optical characteristics of Quartz fibers is generally in the infrared band (800nm, 1300nm UNIVERSITY OF IOWATHE UNIVERSITY OF IOWA Quartz Radiation Damage Test Area atTest Area at LILLIL · Motorized

Akgun, Ugur

268

Dry powder mixes comprising phase change materials  

DOE Patents [OSTI]

Free flowing, conformable powder-like mix of silica particles and a phase change material (PCM) is provided. The silica particles have a critical size of about 0.005 to about 0.025 microns and the PCM must be added to the silica in an amount of 75% or less PCM per combined weight of silica and PCM. The powder-like mix can be used in tableware items, medical wraps, tree wraps, garments, quilts and blankets, and in cementitious compositions of the type in which it is beneficial to use a PCM material. The silica-PCM mix can also be admixed with soil to provide a soil warming effect and placed about a tree, flower, or shrub. 2 figures.

Salyer, I.O.

1994-02-01T23:59:59.000Z

269

Dry powder mixes comprising phase change materials  

DOE Patents [OSTI]

Free flowing, conformable powder-like mix of silica particles and a phase change material (p.c.m.) is disclosed. The silica particles have a critical size of about 7[times]10[sup [minus]3] to about 7[times]10[sup [minus]2] microns and the p.c.m. must be added to the silica in an amount of 80 wt. % or less p.c.m. per combined weight of silica and p.c.m. The powder-like mix can be used in tableware items, medical wraps, tree wraps, garments, quilts and blankets, and in cementitious compositions of the type in which it is beneficial to use a p.c.m. material. The silica-p.c.m. mix can also be admixed with soil to provide a soil warming effect and placed about a tree, flower, or shrub.

Salyer, I.O.

1993-05-18T23:59:59.000Z

270

Dry powder mixes comprising phase change materials  

DOE Patents [OSTI]

A free flowing, conformable powder-like mix of silica particles and a phase change material (p.c.m.) is disclosed. The silica particles have a critical size of about 7 [times] 10[sup [minus]3] to about 7 [times] 10[sup [minus]2] microns and the pcm must be added to the silica in an amount of 80 wt. % or less pcm per combined weight of silica and pcm. The powder-like mix can be used in tableware items, medical wraps, tree wraps, garments, quilts and blankets, and in cementitious compositions of the type in which it is beneficial to use a pcm material. The silica-pcm mix can also be admixed with soil to provide a soil warming effect and placed about a tree, flower, or shrub. 9 figs.

Salyer, I.O.

1992-04-21T23:59:59.000Z

271

Fabricating solid carbon porous electrodes from powders  

DOE Patents [OSTI]

Fabrication of conductive solid porous carbon electrodes for use in batteries, double layer capacitors, fuel cells, capacitive dionization, and waste treatment. Electrodes fabricated from low surface area (<50 m.sup.2 /gm) graphite and cokes exhibit excellent reversible lithium intercalation characteristics, making them ideal for use as anodes in high voltage lithium insertion (lithium-ion) batteries. Electrodes having a higher surface area, fabricated from powdered carbon blacks, such as carbon aerogel powder, carbon aerogel microspheres, activated carbons, etc. yield high conductivity carbon compositives with excellent double layer capacity, and can be used in double layer capacitors, or for capacitive deionization and/or waste treatment of liquid streams. By adding metallic catalysts to be high surface area carbons, fuel cell electrodes can be produced.

Kaschmitter, James L. (Pleasanton, CA); Tran, Tri D. (Livermore, CA); Feikert, John H. (Livermore, CA); Mayer, Steven T. (San Leandro, CA)

1997-01-01T23:59:59.000Z

272

Fabricating solid carbon porous electrodes from powders  

DOE Patents [OSTI]

Fabrication is described for conductive solid porous carbon electrodes for use in batteries, double layer capacitors, fuel cells, capacitive deionization, and waste treatment. Electrodes fabricated from low surface area (<50 m{sup 2}/gm) graphite and cokes exhibit excellent reversible lithium intercalation characteristics, making them ideal for use as anodes in high voltage lithium insertion (lithium-ion) batteries. Electrodes having a higher surface area, fabricated from powdered carbon blacks, such as carbon aerogel powder, carbon aerogel microspheres, activated carbons, etc. yield high conductivity carbon composites with excellent double layer capacity, and can be used in double layer capacitors, or for capacitive deionization and/or waste treatment of liquid streams. By adding metallic catalysts to high surface area carbons, fuel cell electrodes can be produced. 1 fig.

Kaschmitter, J.L.; Tran, T.D.; Feikert, J.H.; Mayer, S.T.

1997-06-10T23:59:59.000Z

273

EPR Investigation of Irradiated Curry Powder  

SciTech Connect (OSTI)

Gamma-ray irradiated curry powder, a well priced oriental spice was investigated in order to establish the ability of EPR to detect the presence and time stability of free irradiation free-radicals. Accordingly, curry powder aliquots were irradiated with gradually increasing absorbed doses up to 11.3 kGy. The EPR spectra of all irradiated samples show the presence of al last two different species of free radicals, whose concentration increased monotonously with the absorbed doses. A 100 deg. C isothermal annealing of irradiated samples has shown a differential reduction of amplitude of various components of the initial spectra, but even after 3.6 h of thermal treatment, the remaining amplitude represents no less then 30% of the initial ones. The same peculiarities have been noticed after more than one year storage at room temperature, all of them being very useful in establishing the existence of any previous irradiation treatment.

Duliu, O. G.; Ali, S. I. [University of Bucharest, Department of Atomic and Nuclear Physics, P.O. Box MG-11, 077125 Bucharest (Romania); Georgescu, R. [National Institute for Physics and Nuclear Engineering-Horia Hulubei, P.O. Box MG-6, 077125 Bucharest (Romania)

2007-04-23T23:59:59.000Z

274

Dry powder mixes comprising phase change materials  

SciTech Connect (OSTI)

Free flowing, conformable powder-like mix of silica particles and a phase change material (p.c.m.) is disclosed. The silica particles have a critical size of about 7.times.10.sup.-3 to about 7.times.10.sup.-2 microns and the pcm must be added to the silica in an amount of 80 wt. % or less pcm per combined weight of silica and pcm. The powder-like mix can be used in tableware items, medical wraps, tree wraps, garments, quilts and blankets, and in cementitious compositions of the type in which it is beneficial to use a pcm material. The silica-pcm mix can also be admixed with soil to provide a soil warming effect and placed about a tree, flower, or shrub.

Salyer, Ival O. (Dayton, OH)

1992-01-01T23:59:59.000Z

275

Dry powder mixes comprising phase change materials  

SciTech Connect (OSTI)

Free flowing, conformable powder-like mix of silica particles and a phase change material (PCM) is provided. The silica particles have a critical size of about 0.005 to about 0.025 microns and the PCM must be added to the silica in an amount of 75% or less PCM per combined weight of silica and PCM. The powder-like mix can be used in tableware items, medical wraps, tree wraps, garments, quilts and blankets, and in cementitious compositions of the type in which it is beneficial to use a PCM material. The silica-PCM mix can also be admixed with soil to provide a soil warming effect and placed about a tree, flower, or shrub.

Salyer, Ival O. (Dayton, OH)

1994-01-01T23:59:59.000Z

276

Dry powder mixes comprising phase change materials  

SciTech Connect (OSTI)

Free flowing, conformable powder-like mix of silica particles and a phase change material (p.c.m.) is disclosed. The silica particles have a critical size of about 7.times.10.sup.-3 to about 7.times.10.sup.-2 microns and the pcm must be added to the silica in an amount of 80 wt. % or less pcm per combined weight of silica and pcm. The powder-like mix can be used in tableware items, medical wraps, tree wraps, garmets, quilts and blankets, and in cementitious compositions of the type in which it is beneficial to use a pcm material. The silica-pcm mix can also be admixed with soil to provide a soil warming effect and placed about a tree, flower, or shrub.

Salyer, Ival O. (Dayton, OH)

1993-01-01T23:59:59.000Z

277

Dry powder mixes comprising phase change materials  

DOE Patents [OSTI]

Free flowing, conformable powder-like mix of silica particles and a phase change material (p.c.m.) is disclosed. The silica particles have a critical size of about 7.times.10.sup.-3 to about 7.times.10.sup.-2 microns and the pcm must be added to the silica in an amount of 80 wt. % or less pcm per combined weight of silica and pcm. The powder-like mix can be used in tableware items, medical wraps, tree wraps, garments, quilts and blankets, and in cementitious compositions of the type in which it is beneficial to use a pcm material. The silica-pcm mix can also be admixed with soil to provide a soil warming effect and placed about a tree, flower, or shrub.

Salyer, Ival O. (Dayton, OH)

1993-01-01T23:59:59.000Z

278

Powder River Energy Corporation | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscot County, Maine:Plug Power IncPowder River Energy Corporation Place: Sundance,

279

Method of manufacturing aluminide sheet by thermomechanical processing of aluminide powders  

DOE Patents [OSTI]

A powder metallurgical process of preparing a sheet from a powder having an intermetallic alloy composition such as an iron, nickel or titanium aluminide. The sheet can be manufactured into electrical resistance heating elements having improved room temperature ductility, electrical resistivity, cyclic fatigue resistance, high temperature oxidation resistance, low and high temperature strength, and/or resistance to high temperature sagging. The iron aluminide has an entirely ferritic microstructure which is free of austenite and can include, in weight %, 4 to 32% Al, and optional additions such as .ltoreq.1% Cr, .gtoreq.0.05% Zr.ltoreq.2% Ti, .ltoreq.2% Mo, .ltoreq.1% Ni, .ltoreq.0.75% C, .ltoreq.0.1% B, .ltoreq.1% submicron oxide particles and/or electrically insulating or electrically conductive covalent ceramic particles, .ltoreq.1% rare earth metal, and/or .ltoreq.3% Cu. The process includes forming a non-densified metal sheet by consolidating a powder having an intermetallic alloy composition such as by roll compaction, tape casting or plasma spraying, forming a cold rolled sheet by cold rolling the non-densified metal sheet so as to increase the density and reduce the thickness thereof and annealing the cold rolled sheet. The powder can be a water, polymer or gas atomized powder which is subjecting to sieving and/or blending with a binder prior to the consolidation step. After the consolidation step, the sheet can be partially sintered. The cold rolling and/or annealing steps can be repeated to achieve the desired sheet thickness and properties. The annealing can be carried out in a vacuum furnace with a vacuum or inert atmosphere. During final annealing, the cold rolled sheet recrystallizes to an average grain size of about 10 to 30 .mu.m. Final stress relief annealing can be carried out in the B2 phase temperature range.

Hajaligol, Mohammad R. (Midlothian, VA); Scorey, Clive (Cheshire, CT); Sikka, Vinod K. (Oak Ridge, TN); Deevi, Seetharama C. (Midlothian, VA); Fleischhauer, Grier (Midlothian, VA); Lilly, Jr., A. Clifton (Chesterfield, VA); German, Randall M. (State College, PA)

2000-01-01T23:59:59.000Z

280

The reflection of very cold neutrons from diamond powder nanoparticles  

E-Print Network [OSTI]

We study possibility of efficient reflection of very cold neutrons (VCN) from powders of nanoparticles. In particular, we measured the scattering of VCN at a powder of diamond nanoparticles as a function of powder sample thickness, neutron velocity and scattering angle. We observed extremely intense scattering of VCN even off thin powder samples. This agrees qualitatively with the model of independent nanoparticles at rest. We show that this intense scattering would allow us to use nanoparticle powders very efficiently as the very first reflectors for neutrons with energies within a complete VCN range up to $10^{-4}$ eV.

V. V. Nesvizhevsky; E. V. Lychagin; A. Yu. Muzychka; A. V. Strelkov; G. Pignol; K. V. Protasov

2008-05-17T23:59:59.000Z

Note: This page contains sample records for the topic "iowa powder atomization" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Iowa Start-up Taps Ames Laboratory Technology in Challenge | Department of  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGY TAX POLICIES7.pdfFuel2007 | Department7 U.S.DepartmentEnergy Iowa Start-up Taps

282

Iowa State University | OSTI, US Dept of Energy, Office of Scientific and  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsingFunInfrared LandResponsesIon/Surface Reactions and IonEnergyIonsIowa

283

Adams County, Iowa ASHRAE 169-2006 Climate Zone | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300 SouthWaterBrasil Jump to:Iowa ASHRAE 169-2006 Climate Zone Jump to:

284

The University of Iowa Iowa City, Iowa  

E-Print Network [OSTI]

, sustainable design, and additive manufacturing. Prospective candidates with interests in digital arts, public Position in Design and Manufacturing The Department of Mechanical and Industrial Engineering in the area of design and manufacturing effective Spring or Fall 2015. Candidates for senior ranks will also

Kusiak, Andrew

285

Iowa Energy and Cost Savings for New Single- and Multifamily Homes: 2012 IECC as Compared to the 2009 IECC  

SciTech Connect (OSTI)

The 2012 International Energy Conservation Code (IECC) yields positive benefits for Iowa homeowners. Moving to the 2012 IECC from the 2009 IECC is cost effective over a 30-year life cycle. On average, Iowa homeowners will save $7,573 with the 2012 IECC. After accounting for upfront costs and additional costs financed in the mortgage, homeowners should see net positive cash flows (i.e., cumulative savings exceeding cumulative cash outlays) in 1 year for the 2012 IECC. Average annual energy savings are $454 for the 2012 IECC.

Lucas, Robert G.; Taylor, Zachary T.; Mendon, Vrushali V.; Goel, Supriya

2012-06-15T23:59:59.000Z

286

Atomic magnetometer  

DOE Patents [OSTI]

An atomic magnetometer is disclosed which uses a pump light beam at a D1 or D2 transition of an alkali metal vapor to magnetically polarize the vapor in a heated cell, and a probe light beam at a different D2 or D1 transition to sense the magnetic field via a polarization rotation of the probe light beam. The pump and probe light beams are both directed along substantially the same optical path through an optical waveplate and through the heated cell to an optical filter which blocks the pump light beam while transmitting the probe light beam to one or more photodetectors which generate electrical signals to sense the magnetic field. The optical waveplate functions as a quarter waveplate to circularly polarize the pump light beam, and as a half waveplate to maintain the probe light beam linearly polarized.

Schwindt, Peter (Albuquerque, NM); Johnson, Cort N. (Albuquerque, NM)

2012-07-03T23:59:59.000Z

287

Silicon nitride/silicon carbide composite densified materials prepared using composite powders  

DOE Patents [OSTI]

Prepare silicon nitride-silicon carbide composite powders by carbothermal reduction of crystalline silica powder, carbon powder and, optionally, crystalline silicon nitride powder. The crystalline silicon carbide portion of the composite powders has a mean number diameter less than about 700 nanometers and contains nitrogen. The composite powders may be used to prepare sintered ceramic bodies and self-reinforced silicon nitride ceramic bodies.

Dunmead, S.D.; Weimer, A.W.; Carroll, D.F.; Eisman, G.A.; Cochran, G.A.; Susnitzky, D.W.; Beaman, D.R.; Nilsen, K.J.

1997-07-01T23:59:59.000Z

288

Ames expedited site characterization demonstration at the former manufactured gas plant site, Marshalltown, Iowa  

SciTech Connect (OSTI)

The goal of the Ames Expedited Site Characterization (ESC) project is to evaluate and promote both innovative technologies (IT) and state-of-the-practice technologies (SOPT) for site characterization and monitoring. In April and May 1994, the ESC project conducted site characterization, technology comparison, and stakeholder demonstration activities at a former manufactured gas plant (FMGP) owned by Iowa Electric Services (IES) Utilities, Inc., in Marshalltown, Iowa. Three areas of technology were fielded at the Marshalltown FMGP site: geophysical, analytical and data integration. The geophysical technologies are designed to assess the subsurface geological conditions so that the location, fate and transport of the target contaminants may be assessed and forecasted. The analytical technologies/methods are designed to detect and quantify the target contaminants. The data integration technology area consists of hardware and software systems designed to integrate all the site information compiled and collected into a conceptual site model on a daily basis at the site; this conceptual model then becomes the decision-support tool. Simultaneous fielding of different methods within each of the three areas of technology provided data for direct comparison of the technologies fielded, both SOPT and IT. This document reports the results of the site characterization, technology comparison, and ESC demonstration activities associated with the Marshalltown FMGP site. 124 figs., 27 tabs.

Bevolo, A.J.; Kjartanson, B.H.; Wonder, J.D.

1996-03-01T23:59:59.000Z

289

Development of an interdisciplinary curriculum in radiochemistry at the university of Iowa  

SciTech Connect (OSTI)

An interdisciplinary curriculum in radiochemistry is under development at the University of Iowa. The program represents a collaboration between the Departments of Radiology and Chemistry with strong support from the College of Medicine and the College of Liberal Arts and Sciences. The University has undertaken this venture in response to a national and international need for professionals with skills and knowledge of nuclear chemistry and radiochemistry. Students enrolling in this program will benefit from a diverse spectrum of extramurally-funded projects for which radiochemistry is a cornerstone of research and development. Recently, a symposium was conducted at the University of Iowa to determine the undergraduate educational foundation that will produce desirable personnel for the diverse sectors related to radiochemistry. Professionals and researchers from around the United States were invited to contribute their perspectives on aspects of radiochemistry that would be important to include in the undergraduate program. Here, we present a brief communication of the draft curriculum, which is based on our understanding of the current need for radio-chemists and nuclear chemists across disciplines and is informed by our communications with participants in the radiochemistry symposium. Recurring themes, which were stressed by participants, included the need for the development of specialized hands-on open-source laboratory training, internship opportunities, and the inclusion of inexpensive-simple radiochemistry laboratory modules that could be included in early analytical laboratory instruction to attract students to the study of radiochemistry and nuclear chemistry. (authors)

Schultz, M.K. [Department of Radiology and Radiation Oncology, Carver College of Medicine, The University of Iowa, 500 Newton Road, MLB180, Iowa City, IA 52240 (United States); De Vries, D.J. [Radiation and Isotopes for Health, Radiation, Radionuclides and Reactors, Technische Universitite Delft, Delft (Netherlands); Forbes, T.Z. [Department of Chemistry, College of Liberal Arts and Sciences, The University of Iowa, CB W374, Iowa City, IA 52242 (United States)

2013-07-01T23:59:59.000Z

290

Large Bore Powder Gun Qualification (U)  

SciTech Connect (OSTI)

A Large Bore Powder Gun (LBPG) is being designed to enable experimentalists to characterize material behavior outside the capabilities of the NNSS JASPER and LANL TA-55 PF-4 guns. The combination of these three guns will create a capability to conduct impact experiments over a wide range of pressures and shock profiles. The Large Bore Powder Gun will be fielded at the Nevada National Security Site (NNSS) U1a Complex. The Complex is nearly 1000 ft below ground with dedicated drifts for testing, instrumentation, and post-shot entombment. To ensure the reliability, safety, and performance of the LBPG, a qualification plan has been established and documented here. Requirements for the LBPG have been established and documented in WE-14-TR-0065 U A, Large Bore Powder Gun Customer Requirements. The document includes the requirements for the physics experiments, the gun and confinement systems, and operations at NNSS. A detailed description of the requirements is established in that document and is referred to and quoted throughout this document. Two Gun and Confinement Systems will be fielded. The Prototype Gun will be used primarily to characterize the gun and confinement performance and be the primary platform for qualification actions. This gun will also be used to investigate and qualify target and diagnostic modifications through the life of the program (U1a.104 Drift). An identical gun, the Physics Gun, will be fielded for confirmatory and Pu experiments (U1a.102D Drift). Both guns will be qualified for operation. The Gun and Confinement System design will be qualified through analysis, inspection, and testing using the Prototype Gun for the majority of process. The Physics Gun will be qualified through inspection and a limited number of qualification tests to ensure performance and behavior equivalent to the Prototype gun. Figure 1.1 shows the partial configuration of U1a and the locations of the Prototype and Physics Gun/Confinement Systems.

Rabern, Donald A. [Los Alamos National Laboratory; Valdiviez, Robert [Los Alamos National Laboratory

2012-04-02T23:59:59.000Z

291

Laser production of articles from powders  

DOE Patents [OSTI]

Method and apparatus for forming articles from materials in particulate form in which the materials are melted by a laser beam and deposited at points along a tool path to form an article of the desired shape and dimensions. Preferably the tool path and other parameters of the deposition process are established using computer-aided design and manufacturing techniques. A controller comprised of a digital computer directs movement of a deposition zone along the tool path and provides control signals to adjust apparatus functions, such as the speed at which a deposition head which delivers the laser beam and powder to the deposition zone moves along the tool path. 20 figs.

Lewis, G.K.; Milewski, J.O.; Cremers, D.A.; Nemec, R.B.; Barbe, M.R.

1998-11-17T23:59:59.000Z

292

Laser production of articles from powders  

DOE Patents [OSTI]

Method and apparatus for forming articles from materials in particulate form in which the materials are melted by a laser beam and deposited at points along a tool path to form an article of the desired shape and dimensions. Preferably the tool path and other parameters of the deposition process are established using computer-aided design and manufacturing techniques. A controller comprised of a digital computer directs movement of a deposition zone along the tool path and provides control signals to adjust apparatus functions, such as the speed at which a deposition head which delivers the laser beam and powder to the deposition zone moves along the tool path.

Lewis, Gary K. (Los Alamos, NM); Milewski, John O. (Santa Fe, NM); Cremers, David A. (Los Alamos, NM); Nemec, Ronald B. (White Rock, NM); Barbe, Michael R. (White Rock, NM)

1998-01-01T23:59:59.000Z

293

Powder Dropper | Princeton Plasma Physics Lab  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - September 2006PhotovoltaicSeptember 22, 2014SocietyJ.Potential(GFA)Powder Dropper

294

David Rockoff, Jennifer Huckett, Anna Peterson, Jessica Chapman, Nicholas Beyler, Jonathan Hobbs, Timothy Bancroft Department of Statistics Iowa State University  

E-Print Network [OSTI]

County Ames Power Plant Iowa State University Foundation Retired and Senior Volunteer Program STATCOM of Ames Electric Services makes regular reports· of monthly peak power demand projections to a number a simulation-based approach, using actuarial· tables to compute annual conditional probabilities and simulate

295

QWhat are viable strategies for Iowa grape growers to successfully manage weeds and/or reduce pesticide usage while maintaining  

E-Print Network [OSTI]

. Sustainable weed management that includes living or soil mulches minimizes some of the environmental risks for achieving weed management in Iowa vineyards will enable growers to sustainably manage this unique and encourage the use of sustainable land management practices that are environmentally sound, economically

Debinski, Diane M.

296

Carbon Nanotubes as Binder in Electrochemical Supercapacitor Malinda Caudle, Iowa State University Georgia Tech SURF 2011 Fellow  

E-Print Network [OSTI]

densities and varying amounts of carbon nanotubes Fig.3. Energy density compared with power density IIICarbon Nanotubes as Binder in Electrochemical Supercapacitor Malinda Caudle, Iowa State University devices that are both long lasting and fast charging1 . It is possible that carbon nanotubes can act

Li, Mo

297

Supply Chain Management Series Presenter Mike O'Donnell, Iowa State University, worked in the defense industry for six years  

E-Print Network [OSTI]

Supply Chain Management Series Presenter Mike O'Donnell, Iowa State University, worked in the defense industry for six years in a variety of manufacturing, project and program management roles various posi- tions, his focus has been on operations management and process/quality improvement in all as

Lin, Zhiqun

298

Method for preparing metal powder, device for preparing metal powder, method for processing spent nuclear fuel  

DOE Patents [OSTI]

A method for producing metal powder is provided the comprising supplying a molten bath containing a reducing agent, contacting a metal oxide with the molten bath for a time and at a temperature sufficient to reduce the metal in the metal oxide to elemental metal and produce free oxygen; and isolating the elemental metal from the molten bath.

Park, Jong-Hee (Clarendon Hills, IL)

2011-11-29T23:59:59.000Z

299

A significant number of Iowa water treatment systems are dependent upon well-based water sources. Because of this, CIRAS efforts have been focused on the "Ground Water Levels" as reported by Iowa DNR. Currently, DNR officials are indicating that restricti  

E-Print Network [OSTI]

A significant number of Iowa water treatment systems are dependent upon well-based water sources. Because of this, CIRAS efforts have been focused on the "Ground Water Levels" as reported by Iowa DNR. Currently, DNR officials are indicating that restrictions or loss of the water supply is not likely

Lin, Zhiqun

300

Amorphous powders of Al-Hf prepared by mechanical alloying  

SciTech Connect (OSTI)

We synthesized amorphous Al/sub 50/Hf/sub 50/ alloy powder by mechanically alloying an equimolar mixture of crystalline powders of Al and Hf using hexane as a dispersant. We characterized the powder as a function of mechanical-alloying time by scanning electron microscopy, x-ray diffraction, and differential scanning calorimetry. Amorphous Al/sub 50/Hf/sub 50/ powder heated at 10 K s/sup /minus/1/ crystallizes polymorphously at 1003 K into orthorhombic AlHf (CrB-type structure). During mechanical alloying, some hexane decomposes and hydrogen and carbon are incorporated into the amorphous alloy powder. The hydrogen can be removed by annealing the powder by hot pressing at a temperature approximately 30 K below the crystallization temperature. The amorphous compacts have a diamond pyramidal hardness of 1025 DPH. 24 refs., 7 figs., 1 tab.

Schwarz, R.B.; Hannigan, J.W.; Sheinberg, H.; Tiainen, T.

1988-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "iowa powder atomization" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Synthesis of nanophase W and WC powders from ammonium metatungstate  

SciTech Connect (OSTI)

Nanophase {alpha}-W powder has been synthesized by reductive decomposition of ammonium metatungstate (AMT) at low temperatures (< 600 C). The formation of {beta}-W, which is the usual product of low temperature reduction of tungsten oxides, is avoided. Thus, it has been possible to lower the carburization temperature of W to WC to about 575 C. Nanophase WC powder (< 10 nm grain size) is produced by the low temperature carburization of nanophase {alpha}-W powder.

Gao, L.; Kear, B.H. [Rutgers, The State Univ. of New Jersey, Piscataway, NJ (United States). Dept. of Ceramic Engineering

1996-06-01T23:59:59.000Z

302

Controlled powder morphology experiments in megabar 304 stainless steel compaction  

SciTech Connect (OSTI)

Experiments with controlled morphology including shape, size, and size distribution were made on 304L stainless steel powders. These experiments involved not only the powder variables but pressure variables of 0.08 to 1.0 Mbar. Also included are measured container strain on the material ranging from 1.5% to 26%. Using a new strain controllable design it was possible to seperate and control, independently, strain and pressure. Results indicate that powder morphology, size distribution, packing density are among the pertinent parameters in predicting compaction of these powders.

Staudhammer, K.P.; Johnson, K.A.

1985-01-01T23:59:59.000Z

303

Forming gas treatment of lithium ion battery anode graphite powders  

DOE Patents [OSTI]

The invention provides a method of making a battery anode in which a quantity of graphite powder is provided. The temperature of the graphite powder is raised from a starting temperature to a first temperature between 1000 and 2000.degree. C. during a first heating period. The graphite powder is then cooled to a final temperature during a cool down period. The graphite powder is contacted with a forming gas during at least one of the first heating period and the cool down period. The forming gas includes H.sub.2 and an inert gas.

Contescu, Cristian Ion; Gallego, Nidia C; Howe, Jane Y; Meyer, III, Harry M; Payzant, Edward Andrew; Wood, III, David L; Yoon, Sang Young

2014-09-16T23:59:59.000Z

304

Neutron Powder Diffraction and Molecular Simulation Study of...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Simulation Study of the Structural Evolution of Ammonia Borane from 15 to 340 K. Neutron Powder Diffraction and Molecular Simulation Study of the Structural Evolution of...

305

Joining of parts via magnetic heating of metal aluminum powders  

DOE Patents [OSTI]

A method of joining at least two parts includes steps of dispersing a joining material comprising a multi-phase magnetic metal-aluminum powder at an interface between the at least two parts to be joined and applying an alternating magnetic field (AMF). The AMF has a magnetic field strength and frequency suitable for inducing magnetic hysteresis losses in the metal-aluminum powder and is applied for a period that raises temperature of the metal-aluminum powder to an exothermic transformation temperature. At the exothermic transformation temperature, the metal-aluminum powder melts and resolidifies as a metal aluminide solid having a non-magnetic configuration.

Baker, Ian

2013-05-21T23:59:59.000Z

306

Process for synthesizing compounds from elemental powders and product  

DOE Patents [OSTI]

A process for synthesizing intermetallic compounds from elemental powders. The elemental powders are initially combined in a ratio which approximates the stoichiometric composition of the intermetallic compound. The mixed powders are then formed into a compact which is heat treated at a controlled rate of heating such that an exothermic reaction between the elements is initiated. The heat treatment may be performed under controlled conditions ranging from a vacuum (pressureless sintering) to compression (hot pressing) to produce a desired densification of the intermetallic compound. In a preferred form of the invention, elemental powders of Fe and Al are combined to form aluminide compounds of Fe.sub.3 Al and FeAl.

Rabin, Barry H. (Idaho Falls, ID); Wright, Richard N. (Idaho Falls, ID)

1993-01-01T23:59:59.000Z

307

COAL QUALITY AND GEOCHEMISTRY, POWDER RIVER BASIN, WYOMING AND MONTANA  

E-Print Network [OSTI]

in the Powder River Basin in Wyoming and Montana (fig. PQ-1) is considered to be "clean coal." For the location

308

Process for preparing titanium nitride powder  

DOE Patents [OSTI]

A process for making titanium nitride powder by reaction of titanium phosphates with sodium cyanide. The process of this invention may comprise mixing one or more phosphates of Ti with a cyanide salt in the absence of oxygen and heating to a temperature sufficient to cause reaction to occur. In the preferred embodiment the ratio of cyanide salt to Ti should be at least 2 which results in the major Ti-containing product being TiN rather than sodium titanium phosphate byproducts. The process is an improvement over prior processes since the byproducts are water soluble salts of sodium which can easily be removed from the preferred TiN product by washing. 2 tabs.

Bamberger, C.E.

1988-06-17T23:59:59.000Z

309

Gaseous Decomposition Products of Safety Powders  

E-Print Network [OSTI]

19.6 Volume o f a i r added 70.8 T o t a l vo lume 90 .4 Volume a f t e r e x p l o s i o n — 74.4 C o n t r a c t i o n 16.0 R e s i d u e a f t e r a b s o r p t i o n o f c a r b o n d i o x i d e 68.8 74.4 6 8 . 8 = 5 .6 . Oxygen p r e s e... DECOMPOSITION PRODUCTS OF SAFETY POWDERS. THESIS SUBMITTED FOR THE DEGREE OF BACHELOR OF SCIENCE I I THE DEPARTMENT OF CHEMICAL BHGUEBRING AT THE UNIVERSITY OF KANSAS. BY C.E.CUBBISOH 1912. RD01D7 MaDSfl COHTEHTS. * * * * Pago * P r e f a c e 6...

Cubbison, C.E.

1912-01-01T23:59:59.000Z

310

Hodges residence: performance of a direct gain passive solar home in Iowa  

SciTech Connect (OSTI)

Results are presented for the performance of the Hodges Residence, a 2200-square-foot earth-sheltered direct gain passive solar home in Ames, Iowa, during the 1979-80 heating season, its first occupied season. No night insulation was used on its 500 square feet of double-pane glass. Total auxiliary heat required was 43 GJ (41 MBTU) gross and 26 GJ (25 MBTU) net, amounting, respectively, to 60 and 36 kJ/C/sup 0/-day-m/sup 2/ (2.9 and 1.8 BTU/F/sup 0/-day-ft/sup 2/). The heating season was unusually cloudy and included the cloudiest January in the 21 years of Ames insolation measurements. Results are also presented for the performance of the hollow-core floor which serves as the main storage mass and for the comfort range in the house.

Hodges, L.

1980-01-01T23:59:59.000Z

311

CP Tech Center I Iowa State University I 2711 S. Loop Dr. Suite 4700,Ames, IA 50010-8664 I 515-294-5798 FOR MORE INFORMATION  

E-Print Network [OSTI]

CP Tech Center I Iowa State University I 2711 S. Loop Dr. Suite 4700,Ames, IA 50010-8664 I 515 calcium sulfate in the form of hemihydrate (plaster) in the cement (false set) or the uncontrolled early

312

atom-atom collisions: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Atomic Safronova, Marianna 3 Atom-atom correlations in colliding Bose-Einstein condensates Quantum Physics (arXiv) Summary: We analyze atom-atom correlations in the s-wave...

313

Sinterable powders from laser driven reactions : final report  

E-Print Network [OSTI]

Extremely fine, uniform ceramic powders have been synthesized from Sil4 NH3 and C2H4 gas phase reactants that are heated by absorbing optical energy emitted from a C02 laser. Resulting Si, Si3N4 and SiC powders have been ...

Haggerty, John Scarseth

1981-01-01T23:59:59.000Z

314

Neutral atom traps.  

SciTech Connect (OSTI)

This report describes progress in designing a neutral atom trap capable of trapping sub millikelvin atom in a magnetic trap and shuttling the atoms across the atom chip from a collection area to an optical cavity. The numerical simulation and atom chip design are discussed. Also, discussed are preliminary calculations of quantum noise sources in Kerr nonlinear optics measurements based on electromagnetically induced transparency. These types of measurements may be important for quantum nondemolition measurements at the few photon limit.

Pack, Michael Vern

2008-12-01T23:59:59.000Z

315

Synthesis of high purity sinterable silicon carbide powder  

SciTech Connect (OSTI)

High purity, submicron silicon carbide powders were produced via gas phase synthesis using a hydrogen/argon plasma. Two test facilities were constructed, a bench-scale unit and a larger pilot scale reactor. Three candidate silicon sources were evaluated:silicon tetrachloride (SiCl{sub 4}). dimethyldichlorosilane (CH{sub 3}){sub 2}(SiCl{sub 2}) and methyltrichlorosilane (CH{sub 3}SiCl{sub 3}). Product powders were evaluated on the basis of pressureless sinterability, surface area, agglomeration, particle size distribution, phase distribution and chemistry. Three commercial powders, Starck A10, Starck B10, and Carborundum submicron alpha silicon carbide, were also evaluated for comparison to the product powders. Powders were reproducibly synthesized at a rate of one pound per hour for standard run times of five hours. Product powders exhibited chemical and physical properties equal to or exceeding the commercial powders evaluated. In limited attempts to pressureless sinter the product powders, densities of 91% of theoretical were obtained with as-produced powder. Post-processing permitted densities in excess of 97% of theoretical. X-ray diffraction of the product indicates that the product powders are primarily beta poly-types, with traces of alpha present. Increased production rates to a target level of seven pounds per hour were not possible due to current transients produced by the pilot scale power supply. Extensive unsuccessful efforts to reduce or eliminate the transients are described. Low recovered product yields resulted from a failure of a product collection filter that was not discovered until the completion of the project.

Boecker, W.D.; Mehosky, B.L.; Rogers, R.S.C.; Storm, R.S.; Venkateswaran, V. (Carborundum Co., Niagara Falls, NY (USA). Structural Ceramics Div.)

1989-11-01T23:59:59.000Z

316

Multi-scale current activated tip-based sintering of powder-based materials  

E-Print Network [OSTI]

Japan Society for powder Metallurgy 9 B. Srinivasaro, K. Oh-PM sintering method. Powder Metallurgy 45(4):322-328 47 Z.A.Japan Society of Powder Metallurgy 57(10): 654-659 106 M.

El Desouky, Ahmed Mohamed

2012-01-01T23:59:59.000Z

317

Homogeneous Precipitation of Nickel Hydroxide Powders  

SciTech Connect (OSTI)

Precipitation and characterization of nickel hydroxide powders were investigated. A comprehensive precipitation model incorporating the metal ion hydrolysis, complexation and precipitation reactions was developed for the production of the powders with urea precipitation method. Model predictions on Ni{sup 2+} precipitation rate were confirmed with precipitation experiments carried out at 90 C. Experimental data and model predictions were in remarkable agreement. Uncertainty in the solubility product data of nickel hydroxides was found to be the large contributor to the error. There were demonstrable compositional variations across the particle cross-sections and the growth mechanism was determined to be the aggregation of primary crystallites. This implied that there is a change in the intercalate chemistry of the primary crystallites with digestion time. Predicted changes in the concentrations of simple and complex ions in the solution support the proposed mechanism. The comprehensive set of hydrolysis reactions used in the model described above allows the investigation of other systems provided that accurate reaction constants are available. the fact that transition metal ions like Ni{sup 2+} form strong complexes with ammonia presents a challenge in the full recovery of the Ni{sup 2+}. On the other hand, presence of Al{sup 3+} facilitates the complete precipitation of Ni{sup 2+} in about 3 hours of digestion. A challenge in their predictive modeling studies had been the fact that simultaneous incorporation of more than one metal ion necessitates a different approach than just using the equilibrium constants of hydrolysis, complexation and precipitation reactions. Another limitation of using equilibrium constants is that the nucleation stage of digestion, which is controlled mainly by kinetics, is not fully justified. A new program released by IBM Almaden Research Center (Chemical Kinetics Simulator{trademark}, Version 1.01) lets the user change the order of kinetic components of a reaction which was set to stoichiometric constant with which the species appear in the reaction in KINSIM by default. For instance, in the case of LDH precipitation, the new program allows to change the order of species in the reactions associated with Al{sup 3+} and let the Ni{sup 2+} reactions take over. This could be carried on iteratively until a good fit between the experimental data and the predictions were observed. However for such studies availability of accurate equilibrium constants (especially for the solubility products for the solid phase) is a prerequisite.

Bora Mavis

2003-12-12T23:59:59.000Z

318

Petrologic and petrophysical evaluation of the Dallas Center Structure, Iowa, for compressed air energy storage in the Mount Simon Sandstone.  

SciTech Connect (OSTI)

The Iowa Stored Energy Plant Agency selected a geologic structure at Dallas Center, Iowa, for evaluation of subsurface compressed air energy storage. The site was rejected due to lower-than-expected and heterogeneous permeability of the target reservoir, lower-than-desired porosity, and small reservoir volume. In an initial feasibility study, permeability and porosity distributions of flow units for the nearby Redfield gas storage field were applied as analogue values for numerical modeling of the Dallas Center Structure. These reservoir data, coupled with an optimistic reservoir volume, produced favorable results. However, it was determined that the Dallas Center Structure cannot be simplified to four zones of high, uniform permeabilities. Updated modeling using field and core data for the site provided unfavorable results for air fill-up. This report presents Sandia National Laboratories' petrologic and petrophysical analysis of the Dallas Center Structure that aids in understanding why the site was not suitable for gas storage.

Heath, Jason E.; Bauer, Stephen J.; Broome, Scott Thomas; Dewers, Thomas A.; Rodriguez, Mark Andrew

2013-03-01T23:59:59.000Z

319

7 -ATOMIC PROCESSES Atomic processes can be  

E-Print Network [OSTI]

1 7 - ATOMIC PROCESSES Atomic processes can be: 1. Scattering 2. Absorption/Thermal Emission scattering, although the results won't change much when this condition is relaxed. Absorption/Thermal Emission Free-free (continuum) ("Bremsstrahlung") Emission/Absorption #12;2 Bound-Bound & Bound

Sitko, Michael L.

320

7 -ATOMIC PROCESSES Atomic processes can be  

E-Print Network [OSTI]

1 7 - ATOMIC PROCESSES Atomic processes can be: 1. Scattering 2. Absorption/Thermal Emission scattering, although the results won't change much when this condition is relaxed. #12;2 Absorption/Thermal Emission Free-free (continuum) ("Bremsstrahlung") Emission/Absorption Bound-Bound & Bound-Free Processes

Sitko, Michael L.

Note: This page contains sample records for the topic "iowa powder atomization" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

UNITED STATES ATOMIC ENERGY COMMISSION OAK RIDGE TENNESSEE THE DIFFRACTION OF NEUTRONS BY CRYSTALLINE POWDERS  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched Ferromagnetism in Layeredof EnergyLeaseEnergyUNCLASSIFIED 2 1 2 :MDDC 869

322

Morphology and composition of Ni-Co electrodeposited powders  

SciTech Connect (OSTI)

The morphology, phase and chemical composition of Ni-Co alloy powders electrodeposited from an ammonium sulfate-boric acid containing electrolyte with different ratio of Ni/Co ions were investigated. The ratios of Ni/Co ions were 1/1, 1/2 and 1/3. The morphology, chemical composition and phase composition of the electrodeposited alloy powders were investigated using AES, SEM, EDS and XRD analysis. Composition of the electrolyte, i.e. the ratio of Ni/Co concentrations was found to influence both, the alloy phase composition and the morphology of Ni-Co alloy powders. At the highest ratio of Ni/Co = 1/1 concentrations typical 2D fern-like dendritic particles were obtained. With a decrease of Ni/Co ions ratio among 2D fern-like dendrites, 3D dendrites and different agglomerates were obtained. X-ray diffraction studies showed that the alloy powders mainly consisted of the face-centered cubic {alpha}-nickel phase and hexagonal close-packed {epsilon}-cobalt phase and minor proportions of face-centered cubic {alpha}-cobalt phase. The occurrence of the latter phase was observed only in the alloy powder with the higher cobalt concentration in electrolyte. The electrodeposition of Ni-Co powders occurred in an anomalous manner. - Highlights: Black-Right-Pointing-Pointer Ni-Co alloys powders were successfully electrodeposited. Black-Right-Pointing-Pointer Composition of the electrolyte (Ni/Co ions ratio) was found to influence on morphology of powders. Black-Right-Pointing-Pointer The electrodeposition of Ni-Co powders occurred in an anomalous manner.

Maksimovic, V.M., E-mail: vesnam@vinca.rs [Institute of Nuclear Sciences, 'Vinca', University of Belgrade, 11001 Belgrade, P. O. Box 522 (Serbia); Lacnjevac, U.C. [Institute for Multidisciplinary research, University of Belgrade, P.O. Box 33, 11030 Belgrade (Serbia); Stoiljkovic, M.M. [Institute of Nuclear Sciences, 'Vinca', University of Belgrade, 11001 Belgrade, P. O. Box 522 (Serbia); Pavlovic, M.G. [Institute of Electrochemistry, ICTM, University of Belgrade, 11000 Belgrade, Njegoseva 12 (Serbia); Jovic, V.D. [Institute for Multidisciplinary research, University of Belgrade, P.O. Box 33, 11030 Belgrade (Serbia)

2011-12-15T23:59:59.000Z

323

amorphous ball-milled powders: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

, and thermal properties of Nafion powders prepared by high-energy ball milling of pellets is given. Nafion powders prepared in this manner exhibit thermal behavior similar...

324

E-Print Network 3.0 - aluminum powder mixtures Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

4210: Manufacturing Processes and Engineering Summary: .S. Colton GIT 2009 17 12;Compacting Pressures for Various Metal Powders P Metal Pressure (MPa) Aluminum... Metal Powder...

325

Stabilized Lithium Metal Powder, Enabling Material and Revolutionary...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

-- Washington D.C. es011yakovleva2010o.pdf More Documents & Publications Stabilized Lithium Metal Powder, Enabling Material and Revolutionary Technology for High Energy Li-ion...

326

aluminum powder part: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

nuclear applications. Two specific uses for which this powder is intended are Al2O3 pellets and Al2O 3 ? B4C composite pellets for use as thermal insulator or burnable neutron...

327

aluminum germanium powders: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

nuclear applications. Two specific uses for which this powder is intended are Al2O3 pellets and Al2O 3 ? B4C composite pellets for use as thermal insulator or burnable neutron...

328

Process for synthesizing compounds from elemental powders and product  

DOE Patents [OSTI]

A process for synthesizing intermetallic compounds from elemental powders is described. The elemental powders are initially combined in a ratio which approximates the stoichiometric composition of the intermetallic compound. The mixed powders are then formed into a compact which is heat treated at a controlled rate of heating such that an exothermic reaction between the elements is initiated. The heat treatment may be performed under controlled conditions ranging from a vacuum (pressureless sintering) to compression (hot pressing) to produce a desired densification of the intermetallic compound. In a preferred form of the invention, elemental powders of Fe and Al are combined to form aluminide compounds of Fe[sub 3] Al and FeAl. 25 figures.

Rabin, B.H.; Wright, R.N.

1993-12-14T23:59:59.000Z

329

alloyed powders kermetnye: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

- TxSpace Summary: The research in this thesis covers the design and implementation of a depleted uranium (DU) powder production system and the initial results of a DU-Zr-Mg alloy...

330

alloy powder fabricated: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

- TxSpace Summary: The research in this thesis covers the design and implementation of a depleted uranium (DU) powder production system and the initial results of a DU-Zr-Mg alloy...

331

alloy powders produced: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

- TxSpace Summary: The research in this thesis covers the design and implementation of a depleted uranium (DU) powder production system and the initial results of a DU-Zr-Mg alloy...

332

alloy powders obtained: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

- TxSpace Summary: The research in this thesis covers the design and implementation of a depleted uranium (DU) powder production system and the initial results of a DU-Zr-Mg alloy...

333

alloyed powders hyperfine: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

- TxSpace Summary: The research in this thesis covers the design and implementation of a depleted uranium (DU) powder production system and the initial results of a DU-Zr-Mg alloy...

334

alloy powder prepared: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

- TxSpace Summary: The research in this thesis covers the design and implementation of a depleted uranium (DU) powder production system and the initial results of a DU-Zr-Mg alloy...

335

Neutron detectors comprising ultra-thin layers of boron powder  

SciTech Connect (OSTI)

High-efficiency neutron detector substrate assemblies comprising a first conductive substrate, wherein a first side of the substrate is in direct contact with a first layer of a powder material having a thickness of from about 50 nm to about 250 nm and comprising .sup.10boron, .sup.10boron carbide or combinations thereof, and wherein a conductive material is in proximity to the first layer of powder material; and processes of making said neutron detector substrate assemblies.

Wang, Zhehul; Morris, Christopher

2013-07-23T23:59:59.000Z

336

Consolidation of aluminum 6061 powder by equal channel angular extrusion  

E-Print Network [OSTI]

, the powder is placed in a deformable mold ? often rubber, glass, or stainless steel. The container is evacuated and welded shut and then placed inside the HIP unit. A high- pressure gas or liquid surrounds the powder mold and applies pressure equally on all... oxide films and provide new surface area for welding. Next, the particles are resistance heated and pressure is applied for about 15 minutes. Applied temperatures are lower than HIP temperatures, and PAS uses much shorter consolidation times ? minutes...

Pearson, John Montgomery

1997-01-01T23:59:59.000Z

337

Quality experimental and calculated powder x-ray diffraction  

SciTech Connect (OSTI)

For several years, we have submitted quality powder XRD patterns to the International Centre for Diffraction Data for inclusion as reference standards in their Powder Diffraction File. The procedure followed is described; examples used are {beta}-UH{sub 3}, {alpha}- BaT{sub 2}, alpha-lithium disilicate ({alpha}-Li{sub 2}Si{sub 2}O{sub 5}), and 2,2`,4,4`,6,6`hexanitroazobenzene-III (HNAB-III).

Sullenger, D.B.; Cantrell, J.S.; Beiter, T.A.; Tomlin, D.W.

1996-08-01T23:59:59.000Z

338

Powder segregation during the filling of a simple die  

E-Print Network [OSTI]

. During vibratory die f il ling, f iltration of f ines through the moving powder mass is still a major cause of segregation. The vibration tends to flatten out the inner mound of fines, thereby decreasing radial segregation and increasing vertical... SEGREGATION DURING DIE FILLING 23 l. Introduction 23 2. Experimental 2. 1. Materials 2. 2. Equipment and Procedure 23 23 24 3. Results 4. Discussion 5. Conclusions 24 24 31 III. SOME EFFECTS OF VIBRATION UPON POWDER SEGREGATION DURING DIE...

Lawrence, Larry Raymond

1968-01-01T23:59:59.000Z

339

Titanium Metal Powder Production by the Plasma Quench Process  

SciTech Connect (OSTI)

The goals of this project included the scale-up of the titanium hydride production process to a production rate of 50 kg/hr at a purity level of 99+%. This goal was to be achieved by incrementally increasing the production capability of a series of reactor systems. This methodic approach was designed to allow Idaho Titanium Technologies to systematically address the engineering issues associated with plasma system performance, and powder collection system design and performance. With quality powder available, actual fabrication with the titanium hydride was to be pursued. Finally, with a successful titanium production system in place, the production of titanium aluminide was to be pursued by the simultaneously injection of titanium and aluminum precursors into the reactor system. Some significant accomplishments of the project are: A unique and revolutionary torch/reactor capable of withstanding temperatures up to 5000 C with high thermal efficiency has been operated. The dissociation of titanium tetrachloride into titanium powder and HC1 has been demonstrated, and a one-megawatt reactor potentially capable of producing 100 pounds per hour has been built, but not yet operated at the powder level. The removal of residual subchlorides and adsorbed HC1 and the sintering of powder to form solid bodies have been demonstrated. The production system has been operated at production rates up to 40 pounds per hour. Subsequent to the end of the project, Idaho Titanium Technologies demonstrated that titanium hydride powder can indeed be sintered into solid titanium metal at 1500 C without sintering aids.

R. A. Cordes; A. Donaldson

2000-09-01T23:59:59.000Z

340

Final Report: An Undergraduate Minor in Wind Energy at Iowa State University  

SciTech Connect (OSTI)

This report describes an undergraduate minor program in wind energy that has been developed at Iowa State University. The minor program targets engineering and meteorology students and was developed to provide interested students with focused technical expertise in wind energy science and engineering, to increase their employability and ultimate effectiveness in this growing industry. The report describes the requirements of the minor program and courses that fulfill those requirements. Five new courses directly addressing wind energy have been developed. Topical descriptions for these five courses are provided in this report. Six industry experts in various aspects of wind energy science and engineering reviewed the wind energy minor program and provided detailed comments on the program structure, the content of the courses, and the employability in the wind energy industry of students who complete the program. The general consensus is that the program is well structured, the course content is highly relevant, and students who complete it will be highly employable in the wind energy industry. The detailed comments of the reviewers are included in the report.

James McCalley

2012-11-14T23:59:59.000Z

Note: This page contains sample records for the topic "iowa powder atomization" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Wind Generation Feasibility Study for Sac & Fox Tribe of the Mississippi in Iowa (Meskwaki Nation)  

SciTech Connect (OSTI)

1.2 Overview The Meskwaki Nation will obtain an anemometer tower. Install the tower at the site that has been pre-qualified as the site most likely to produce maximum electric power from the wind. It will collect meteorological data from the tower�s sensors for a one year period, as required for due diligence to identify the site as appropriate for the installation of a wind turbine to provide electric power for the community. Have the collected data analyzed by a meteorologist and a professionally certified wind engineer to produce the reports of expected power generation at the site, for the specific wind turbine(s) under consideration for installation. 1.2.1 Goals of the Tribe The feasibility study reports, including technical and business analyses will be used to obtain contracts and financing required to develop and implement a wind turbine project on the Meskwaki Settlement. Our goal is to produce two (2) mega watts of power and to reduce the cost for electricity currently being paid by the Meskwaki Casino. 1.2.2 Project Objectives Meet the energy needs of the community with clean energy. Bring renewable energy to the settlement in a responsible, affordable manner. Maximize both the economic and the spiritual benefits to the tribe from energy independence. Integrate the Tribe�s energy policies with its economic development goals. Contribute to achieving the Tribe�s long-term goals of self-determination and sovereignty. 1.2.3 Project Location The precise location proposed for the tower is at the following coordinates: 92 Degrees, 38 Minutes, 46.008 Seconds West Longitude 41 Degrees, 59 Minutes, 45.311 Seconds North Latitude. A circle of radius 50.64 meters, enclosing and area of 1.98 acres in PLSS Township T83N, Range R15W, in Iowa. In relative directions, the site is 1,650 feet due west of the intersection of Highway 30 and 305th Street in Tama, Iowa, as approached from the direction of Toledo, Iowa. It is bounded on the north by Highway 30 and on the south by 305th Street, a street which runs along a meandering west-south-west heading from this intersection with Highway 30. In relation to Settlement landmarks, it is 300 meters west of the Meskwaki water tower found in front of the Meskwaki Public Works Department, and is due north of the athletic playing fields of the Meskwaki Settlement School. The accompanying maps (in the Site Resource Maps File) use a red pushpin marker to indicate the exact location, both in the overview frames and in the close-up frame. 1.2.4 Long Term Energy Vision The Meskwaki Tribe is committed to becoming energy self-sufficient, improving the economic condition of the tribe, and maintaining Tribal Values of closeness with Grandmother Earth. The details of the Tribe�s long-term vision continues to evolve. A long term vision exists of: 1) a successful assessment program; 2) a successful first wind turbine project reducing the Tribe�s cost of electricity; 3) creation of a Meskwaki Tribal Power Utility/Coop under the auspices of the new tribal Corporation, as we implement a master plan for economic and business development; 4), and opening the doors for additional wind turbines/renewable energy sources on the community. The additional turbines could lead directly to energy self-sufficiency, or might be the one leg of a multi-leg approach using multiple forms of renewable energy to achieve self-sufficiency. We envision current and future assessment projects providing the data needed to qualify enough renewable energy projects to provide complete coverage for the entire Meskwaki Settlement, including meeting future economic development projects� energy needs. While choosing not to engage in excessive optimism, we can imagine that in the future the Iowa rate-setting bodies will mandate that grid operators pay fair rates (tariffs) to renewable suppliers. We will be ready to expand renewable production of electricity for export, when that time comes. The final report includes the Wind

Lasley, Larry C. [Sac & Fox Tribe of the Mississippi in Iowa

2013-03-19T23:59:59.000Z

342

In vitro degradation and cytotoxicity of Mg/Ca composites produced by powder metallurgy q  

E-Print Network [OSTI]

In vitro degradation and cytotoxicity of Mg/Ca composites produced by powder metallurgy q Y Biodegradation Cytotoxicity Powder metallurgy a b s t r a c t Mg/Ca (1 wt.%, 5 wt.%, 10 wt.% Ca) composites were prepared from pure magnesium and calcium powders using the powder metallurgy method, aiming to enlarge

Zheng, Yufeng

343

Powder Diffraction with Proteins Jon Wright, Irene Margiolaki, Andy Fitch and Yves Watier  

E-Print Network [OSTI]

Powder Diffraction with Proteins Jon Wright, Irene Margiolaki, Andy Fitch and Yves Watier #12 C 3Wright, Protein Powders #12;Wright, Protein Powders 4 Structure representations #12;Wright method to "solve" phase problem · What do we see in electron density maps? 6Wright, Protein Powders #12

Magee, Joseph W.

344

Method for producing microcomposite powders using a soap solution  

DOE Patents [OSTI]

A method for producing microcomposite powders for use in superconducting and non-superconducting applications. A particular method to produce microcomposite powders for use in superconducting applications includes the steps of: (a) preparing a solution including ammonium soap; (b) dissolving a preselected amount of a soluble metallic such as silver nitrate in the solution including ammonium soap to form a first solution; (c) adding a primary phase material such as a single phase YBC superconducting material in particle form to the first solution; (d) preparing a second solution formed from a mixture of a weak acid and an alkyl-mono-ether; (e) adding the second solution to the first solution to form a resultant mixture; (f) allowing the resultant mixture to set until the resultant mixture begins to cloud and thicken into a gel precipitating around individual particles of the primary phase material; (g) thereafter drying the resultant mixture to form a YBC superconducting material/silver nitrate precursor powder; and (h) calcining the YBC superconducting material/silver nitrate precursor powder to convert the silver nitrate to silver and thereby form a YBC/silver microcomposite powder wherein the silver is substantially uniformly dispersed in the matrix of the YBC material.

Maginnis, Michael A. (Coker, AL); Robinson, David A. (Mobile, AL)

1996-01-01T23:59:59.000Z

345

Multiplicative Sets of Atoms.  

E-Print Network [OSTI]

??It is possible for an element to have both an atom factorization and a factorization that will always contain a reducible element. This leads us… (more)

Rand, Ashley Nicole

2013-01-01T23:59:59.000Z

346

Improved graphite furnace atomizer  

DOE Patents [OSTI]

A graphite furnace atomizer for use in graphite furnace atomic absorption spectroscopy is described wherein the heating elements are affixed near the optical path and away from the point of sample deposition, so that when the sample is volatilized the spectroscopic temperature at the optical path is at least that of the volatilization temperature, whereby analyteconcomitant complex formation is advantageously reduced. The atomizer may be elongated along its axis to increase the distance between the optical path and the sample deposition point. Also, the atomizer may be elongated along the axis of the optical path, whereby its analytical sensitivity is greatly increased.

Siemer, D.D.

1983-05-18T23:59:59.000Z

347

Atomic Collapse Observed  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

and professor of Physics at UC Berkeley. Nonrelativistic electrons orbiting a subcritical nucleus exhibit the traditional circular Bohr orbit of atomic physics. But when the...

348

A simple procedure to prepare spherical {alpha}-alumina powders  

SciTech Connect (OSTI)

Spherical {alpha}-alumina powders were prepared by the controlled hydrolysis of aluminum isopropoxide in a hydrolysis system consisting of octanol and acetonitrile. Diverse solvents to dissolve reactant formed diverse hydrolysis systems and affected particle shape of {alpha}-alumina powders. The precursors crystallized to {gamma}-alumina at 1000 deg. C and converted to {alpha}-alumina at 1150 deg. C without intermediate phases. The particle morphology of precursor was retained after it crystallized to {alpha}-alumina. The heating rate influenced the particle shape and the state of agglomeration during calcination process. The thermal properties of the precursors were characterized by thermal gravimetric and differential thermal analysis. X-ray diffraction technique was used to confirm the conversion of crystalline phase of alumina powders from amorphous to {alpha}-phase. Transmission electron microscopy was used to investigate the morphologies and size of the precursors and products.

Liu Hongyu [State Key Laboratory of Fine Chemicals, Dalian University of Technology, Dalian 116012 (China); Ning Guiling [State Key Laboratory of Fine Chemicals, Dalian University of Technology, Dalian 116012 (China)], E-mail: ninggl@dlut.edu.cn; Gan Zhihong; Lin Yuan [State Key Laboratory of Fine Chemicals, Dalian University of Technology, Dalian 116012 (China)

2009-04-02T23:59:59.000Z

349

Aerosol flow reactor production of superconducting ceramic powder  

SciTech Connect (OSTI)

Potential applications and basic studies of superconducting ceramics require the reproducible production of chemically homogeneous, ultrapure powders with controlled particle size distributions. Previous work has mainly examined the use of liquid and solid phase methods for superconducting powder production. In this work, it is shown that carbon-free, submicron powders based on the Y-Ba-Cu-O, La-Sr-Cu-O, Bi-Ca-Sr-Cu-O and Tl-Ca-Ba-Cu-O systems can be produced in a gaseous flow system by reacting aerosol particles containing the nitrate salts of the appropriate metals in flowing oxygen at temperatures of 900 - 1100C. It is also demonstrated that composite Cu/YBa/sub 2/Cu/sub 3/O/sub 7/ wires can be fabricated by thermophoretic deposition of the particles onto the inner surface of a Cu tube hby sintering/annealing.

Kodas, T. (New Mexico Univ., Albuquerque, NM (USA). Dept. of Nuclear Engineering); Engler, E.; Lee, V.; Parkin, L.S. (Research Div., Almaden Research Center, San Jose, CA (US))

1988-01-01T23:59:59.000Z

350

Method for forming biaxially textured articles by powder metallurgy  

DOE Patents [OSTI]

A method of preparing a biaxially textured alloy article comprises the steps of preparing a mixture comprising Ni powder and at least one powder selected from the group consisting of Cr, W, V, Mo, Cu, Al, Ce, YSZ, Y, Rare Earths, (RE), MgO, CeO.sub.2, and Y.sub.2 O.sub.3 ; compacting the mixture, followed by heat treating and rapidly recrystallizing to produce a biaxial texture on the article. In some embodiments the alloy article further comprises electromagnetic or electro-optical devices and possesses superconducting properties.

Goyal, Amit (Knoxville, TN); Williams, Robert K. (Knoxville, TN); Kroeger, Donald M. (Knoxville, TN)

2002-01-01T23:59:59.000Z

351

Process for preparing fine grain titanium carbide powder  

DOE Patents [OSTI]

A method for preparing finely divided titanium carbide powder in which an organotitanate is reacted with a carbon precursor polymer to provide an admixture of the titanium and the polymer at a molecular-level due to a crosslinking reaction between the organotitanate and the polymer. The resulting gel is dried, pyrolyzed to drive off volatile components and provide carbon. The resulting solids are then heated at an elevated temperature to convert the titanium and carbon to high-purity titanium carbide powder in a submicron size range.

Janey, Mark A. (Concord, TN)

1986-01-01T23:59:59.000Z

352

Nano powders, components and coatings by plasma technique  

DOE Patents [OSTI]

Ultra fine and nanometer powders and a method of producing same are provided, preferably refractory metal and ceramic nanopowders. When certain precursors are injected into the plasma flame in a reactor chamber, the materials are heated, melted and vaporized and the chemical reaction is induced in the vapor phase. The vapor phase is quenched rapidly to solid phase to yield the ultra pure, ultra fine and nano product. With this technique, powders have been made 20 nanometers in size in a system capable of a bulk production rate of more than 10 lbs/hr. The process is particularly applicable to tungsten, molybdenum, rhenium, tungsten carbide, molybdenum carbide and other related materials.

McKechnie, Timothy N. (Brownsboro, AL); Antony, Leo V. M. (Huntsville, AL); O'Dell, Scott (Arab, AL); Power, Chris (Guntersville, AL); Tabor, Terry (Huntsville, AL)

2009-11-10T23:59:59.000Z

353

Atomic dark matter  

SciTech Connect (OSTI)

We propose that dark matter is dominantly comprised of atomic bound states. We build a simple model and map the parameter space that results in the early universe formation of hydrogen-like dark atoms. We find that atomic dark matter has interesting implications for cosmology as well as direct detection: Weak-scale dark atoms can accommodate hyperfine splittings of order 100 keV, consistent with the inelastic dark matter interpretation of the DAMA data while naturally evading direct detection bounds. Moreover, protohalo formation can be suppressed below M{sub proto} ? 10{sup 3}–10{sup 6}M{sub s}un for weak scale dark matter due to Ion-Radiation and Ion-Atom interactions in the dark sector.

Kaplan, David E.; Krnjaic, Gordan Z.; Rehermann, Keith R.; Wells, Christopher M., E-mail: dkaplan@pha.jhu.edu, E-mail: gordan@pha.jhu.edu, E-mail: keith@pha.jhu.edu, E-mail: cwells13@pha.jhu.edu [Department of Physics and Astronomy, Johns Hopkins University, 3400 North Charles Street, Baltimore, MD 21218-2686 (United States)

2010-05-01T23:59:59.000Z

354

Rapid formation of phase-clean 110 K (Bi-2223) powders derived via freeze-drying process  

SciTech Connect (OSTI)

This invention relates to an improved process of preparing Bi-Sr-Ca-Cu-O (BSCCO) powders, and more particularly, to a process for preparing BSCCO powders that utilize freeze-drying. The process generally includes splat freezing a nitrate solution of Bi, Pb, Sr, Ca, and Cu to form flakes of the solution; grinding the flakes to form a powder; freeze-drying the frozen powder; heating the powder to form dry green precursor powders; denitrating the powders; and heating the powders to form phase-clean Bi-2223 powders.

Balachandran, U.; Krishnaraj, P.; Eror, N.G.; Lelovic, M.

1994-12-31T23:59:59.000Z

355

Dispersoid reinforced alloy powder and method of making  

DOE Patents [OSTI]

A method of making dispersion-strengthened alloy particles involves melting an alloy having a corrosion and/or oxidation resistance-imparting alloying element, a dispersoid-forming element, and a matrix metal wherein the dispersoid-forming element exhibits a greater tendency to react with a reactive species acquired from an atomizing gas than does the alloying element. The melted alloy is atomized with the atomizing gas including the reactive species to form atomized particles so that the reactive species is (a) dissolved in solid solution to a depth below the surface of atomized particles and/or (b) reacted with the dispersoid-forming element to form dispersoids in the atomized particles to a depth below the surface of said atomized particles. Bodies made from the dispersion strengthened solidified particles exhibit enhanced fatigue and creep resistance and reduced wear as well as enhanced corrosion and/or oxidation resistance at high temperatures.

Anderson, Iver E; Terpstra, Robert L

2014-10-21T23:59:59.000Z

356

Oxide Dispersion Strengthened Iron Aluminide by CVD Coated Powders  

SciTech Connect (OSTI)

This I &I Category2 program developed chemical vapor deposition (CVD) of iron, aluminum and aluminum oxide coated iron powders and the availability of high temperature oxidation, corrosion and erosion resistant coating for future power generation equipment and can be used for retrofitting existing fossil-fired power plant equipment. This coating will provide enhanced life and performance of Coal-Fired Boilers components such as fire side corrosion on the outer diameter (OD) of the water wall and superheater tubing as well as on the inner diameter (ID) and OD of larger diameter headers. The program also developed a manufacturing route for readily available thermal spray powders for iron aluminide coating and fabrication of net shape component by powder metallurgy route using this CVD coated powders. This coating can also be applid on jet engine compressor blade and housing, industrial heat treating furnace fixtures, magnetic electronic parts, heating element, piping and tubing for fossil energy application and automotive application, chemical processing equipment , heat exchanger, and structural member of aircraft. The program also resulted in developing a new fabrication route of thermal spray coating and oxide dispersion strengthened (ODS) iron aluminide composites enabling more precise control over material microstructures.

Asit Biswas Andrew J. Sherman

2006-09-25T23:59:59.000Z

357

Explosively driven low-density foams and powders  

SciTech Connect (OSTI)

Hollow RX-08HD cylindrical charges were loaded with boron and PTFE, in the form of low-bulk density powders or powders dispersed in a rigid foam matrix. Each charge was initiated by a Comp B booster at one end, producing a detonation wave propagating down the length of the cylinder, crushing the foam or bulk powder and collapsing the void spaces. The PdV work done in crushing the material heated it to high temperatures, expelling it in a high velocity fluid jet. In the case of boron particles supported in foam, framing camera photos, temperature measurements, and aluminum witness plates suggest that the boron was completely vaporized by the crush wave and that the boron vapor turbulently mixed with and burned in the surrounding air. In the case of PTFE powder, X-ray photoelectron spectroscopy of residues recovered from fragments of a granite target slab suggest that heating was sufficient to dissociate the PTFE to carbon vapor and molecular fluorine which reacted with the quartz and aluminum silicates in the granite to form aluminum oxide and mineral fluoride compounds.

Viecelli, James A. (Orinda, CA); Wood, Lowell L. (Simi Valley, CA); Ishikawa, Muriel Y. (Livermore, CA); Nuckolls, John H. (Danville, CA); Pagoria, Phillip F. (Livermore, CA)

2010-05-04T23:59:59.000Z

358

Final Technical Report for "High Energy Physics at The University of Iowa"  

SciTech Connect (OSTI)

Particle Physics explores the very fundamental building blocks of our universe: the nature of forces, of space and time. By exploring very energetic collisions of sub-nuclear particles with sophisticated detectors at the colliding beam accelerators (as well as others), experimental particle physicists have established the current theory known as the Standard Model (SM), one of the several theoretical postulates to explain our everyday world. It explains all phenomena known up to a very small fraction of a second after the Big Bang to a high precision; the Higgs boson, discovered recently, was the last of the particle predicted by the SM. However, many other phenomena, like existence of dark energy, dark matter, absence of anti-matter, the parameters in the SM, neutrino masses etc. are not explained by the SM. So, in order to find out what lies beyond the SM, i.e., what conditions at the earliest fractions of the first second of the universe gave rise to the SM, we constructed the Large Hadron Collider (LHC) at CERN after the Tevatron collider at Fermi National Accelerator Laboratory. Each of these projects helped us push the boundary further with new insights as we explore a yet higher energy regime. The experiments are extremely complex, and as we push the boundaries of our existing knowledge, it also requires pushing the boundaries of our technical knowhow. So, not only do we pursue humankind’s most basic intellectual pursuit of knowledge, we help develop technology that benefits today’s highly technical society. Our trained Ph.D. students become experts at fast computing, manipulation of large data volumes and databases, developing cloud computing, fast electronics, advanced detector developments, and complex interfaces in several of these areas. Many of the Particle physics Ph.D.s build their careers at various technology and computing facilities, even financial institutions use some of their skills of simulation and statistical prowess. Additionally, last but not least, today’s discoveries make for tomorrow’s practical uses of an improved life style, case in point, internet technology, fiber optics, and many such things. At The University of Iowa we are involved in the LHC experiments, ATLAS and CMS, building equipment, with calibration and maintenance, supporting the infrastructure in hardware, software and analysis as well as participating in various aspects of data analyses. Our theory group works on fundamentals of field theories and on exploration of non-accelerator high energy neutrinos and possible dark matter searches.

Mallik, Usha; Meurice, Yannick; Nachtman, Jane; Onel, Yasar; Reno, Mary

2013-07-31T23:59:59.000Z

359

International Symposium on Gaseous and Odour Emissions from Animal Production Facilities, Horsens, Jutland, Denmark 1-4 June, 2003 AMMONIA EMISSIONS FROM LAYER HOUSES IN IOWA  

E-Print Network [OSTI]

International Symposium on Gaseous and Odour Emissions from Animal Production Facilities, Horsens, Jutland, Denmark 1-4 June, 2003 1 AMMONIA EMISSIONS FROM LAYER HOUSES IN IOWA Y. Liang1 , H. Xin2 , A. Casey10 ABSTRACT An ongoing project of monitoring ammonia (NH3) emissions from U.S. layer houses

Kentucky, University of

360

College of Agriculture and Life Sciences Study Abroad Office 111Curtiss Hall, Iowa State University Phone (515)294-8447 Fax (515) 294-9477  

E-Print Network [OSTI]

College of Agriculture and Life Sciences Study Abroad Office 111Curtiss Hall, Iowa State University Phone (515)294-8447 Fax (515) 294-9477 College of Agriculture and Life Sciences Study Abroad Scholarship Study Abroad office, which are for College of Agriculture and Life Sciences students only. Please refer

Lin, Zhiqun

Note: This page contains sample records for the topic "iowa powder atomization" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Proceedings of the Midwest Poultry Federation Convention, St. Paul, MN. March 16-18, 2004 Ammonia Emission from Iowa Layer Houses  

E-Print Network [OSTI]

conversion as one of eight principles to reduce ammonia emission from layer hen houses. Research on reduction., Pittsburg, PA) for NH3 measurement and infrared sensor (0-5000 ± 20 ppm; Vaisala, Inc., Woburn, MA) for CO2 - Ammonia Emission from Iowa Layer Houses H. Xin1 , Y. Liang2 , R.S. Gates3 , E. F. Wheeler4 1 Professor

Kentucky, University of

362

AN INVESTIGATION OF HYDROSTATIC EXTRUSION AND OTHER DEFORMATION MODES FOR THE FABRICATION OF MULTI-FILAMENTARY NIOBIUM-TIN SUPERCONDUCTORS BY A POWDER METALLURGY APPROACH  

E-Print Network [OSTI]

SUPERCONDUCTORS BY A POWDER METALLURGY ApPROACH By GLEN EARLTin Superconductors by a Powder Metallurgy Approach TABLE OFSUPERCONDUCTORS BY A POWDER METALLURGY APPROACH Glen Earl

MacLeod, G.E.

2010-01-01T23:59:59.000Z

363

Optical imaging of Rydberg atoms .  

E-Print Network [OSTI]

??We present an experiment exploring electromagnetically induced transparency (EIT) in Rydberg atoms in order to observe optical nonlinearities at the single photon level. ??Rb atoms… (more)

Mazurenko, Anton

2012-01-01T23:59:59.000Z

364

Rydberg Atoms for Quantum Information.  

E-Print Network [OSTI]

??I examine interactions between ensembles of cold Rydberg atoms, and between Rydberg atoms and an intense, optical standing wave. Because of their strong electrostatic interactions,… (more)

Younge, Kelly Cooper

2010-01-01T23:59:59.000Z

365

Optical atomic magnetometer  

DOE Patents [OSTI]

An optical atomic magnetometers is provided operating on the principles of nonlinear magneto-optical rotation. An atomic vapor is optically pumped using linearly polarized modulated light. The vapor is then probed using a non-modulated linearly polarized light beam. The resulting modulation in polarization angle of the probe light is detected and used in a feedback loop to induce self-oscillation at the resonant frequency.

Budker, Dmitry; Higbie, James; Corsini, Eric P

2013-11-19T23:59:59.000Z

366

Metal atomization spray nozzle  

DOE Patents [OSTI]

A spray nozzle for a magnetohydrodynamic atomization apparatus has a feed passage for molten metal and a pair of spray electrodes mounted in the feed passage. The electrodes, diverging surfaces which define a nozzle throat and diverge at an acute angle from the throat. Current passes through molten metal when fed through the throat which creates the Lorentz force necessary to provide atomization of the molten metal. 6 figures.

Huxford, T.J.

1993-11-16T23:59:59.000Z

367

Fabrication of NiTi shape memory alloy from elemental powders by hot isostatic pressing  

E-Print Network [OSTI]

The research involved in this thesis was conducted to develop a procedure for producing cylindrical specimens of NiTi shape memory alloy for mechanical testing from elemental powders by hot isostatic pressing. Powders were mixed to ratios of 50...

McNeese, Matthew Doyle

1997-01-01T23:59:59.000Z

368

E-Print Network 3.0 - acid whey powder Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

r a c t This paper describes controlled synthesis of Fe3O4 powder via... carbothermal reduction method using pure Fe2O3 powder and glucose mixture as starting materials. Pure Fe3O4...

369

Atomic mass compilation 2012  

SciTech Connect (OSTI)

Atomic mass reflects the total binding energy of all nucleons in an atomic nucleus. Compilations and evaluations of atomic masses and derived quantities, such as neutron or proton separation energies, are indispensable tools for research and applications. In the last decade, the field has evolved rapidly after the advent of new production and measuring techniques for stable and unstable nuclei resulting in substantial ameliorations concerning the body of data and their precision. Here, we present a compilation of atomic masses comprising the data from the evaluation of 2003 as well as the results of new measurements performed. The relevant literature in refereed journals and reports as far as available, was scanned for the period beginning 2003 up to and including April 2012. Overall, 5750 new data points have been collected. Recommended values for the relative atomic masses have been derived and a comparison with the 2003 Atomic Mass Evaluation has been performed. This work has been carried out in collaboration with and as a contribution to the European Nuclear Structure and Decay Data Network of Evaluations.

Pfeiffer, B., E-mail: bpfeiffe@uni-mainz.de [II. Physikalisches Institut, Justus-Liebig-Universität Gießen, Gießen (Germany); GSI Helmholtzzentrum für Schwerionenforschung, Darmstadt (Germany); Venkataramaniah, K. [Sri Sathya Sai Institute of Higher Learning, Prasanthinilayam (India)] [Sri Sathya Sai Institute of Higher Learning, Prasanthinilayam (India); Czok, U. [II. Physikalisches Institut, Justus-Liebig-Universität Gießen, Gießen (Germany)] [II. Physikalisches Institut, Justus-Liebig-Universität Gießen, Gießen (Germany); Scheidenberger, C. [GSI Helmholtzzentrum für Schwerionenforschung, Darmstadt (Germany) [GSI Helmholtzzentrum für Schwerionenforschung, Darmstadt (Germany); II. Physikalisches Institut, Justus-Liebig-Universität Gießen, Gießen (Germany)

2014-03-15T23:59:59.000Z

370

STUDIES OF DESIGN PARAMETERS IN THE FABRICATION OF Nb-Al-Ge SUPERCONDUCTORS BY THE POWDER METALLURGY INFILTRATION METHOD  

E-Print Network [OSTI]

TicltcJ by a Powder Metallurgy Approach, (D. Eng. Thesis)SUPERCONDUCTORS BY THE POWDER METALLURGY INFILTRATION METHODBY TrIE POWDER METALLURGY INFILTRATION METHOD Jose J. Granda

Granda, J.J.

2010-01-01T23:59:59.000Z

371

Nonaqueous solution synthesis process for preparing oxide powders of lead zirconate titanate and related materials  

DOE Patents [OSTI]

A process is disclosed for producing powders of perovskite-type compounds which comprises mixing a metal alkoxide solution with a lead acetate solution to form a homogeneous, clear metal solution, adding an oxalic acid/n-propanol solution to this metal solution to form an easily filterable, free-flowing precursor powder and then calcining this powder. This process provides fine perovskite-phase powders with ferroelectric properties which are particularly useful in a variety of electronic applications. 4 figs.

Voigt, J.A.; Sipola, D.L.; Tuttle, B.A.; Anderson, M.T.

1999-06-01T23:59:59.000Z

372

"Ceramics and high-temperature composites, silicides" Oxidation of Stainless Steel Powder  

E-Print Network [OSTI]

: Powder, stainless steel, oxidation INTRODUCTION Ceramic matrix composites dispersed with metal particles"Ceramics and high-temperature composites, silicides" CHTC9 Oxidation of Stainless Steel Powder. To understand the corrosion behavior of a model 304L(p)-ZrO2(s) composite, a 304L stainless steel powder has

Paris-Sud XI, Université de

373

Plasma Sprayed Pour Tubes and Other Melt Handling Components for Use in Gas Atomization  

SciTech Connect (OSTI)

Ames Laboratory has successfully used plasma sprayed ceramic components made from yttria stabilized zirconia as melt pouring tubes for gas atomization for many years. These tubes have proven to be strong, thermal shock resistant and versatile. Various configurations are possible both internally and externally. Accurate dimensions are achieved internally with a machined fugitive graphite mandrel and externally by diamond grinding. The previous study of the effect of spray parameters on density was extended to determine the effect of the resulting density on the thermal shock characteristics on down-quenching and up-quenching. Encouraging results also prompted investigation of the use of plasma spraying as a method to construct a melt pour exit stopper that is mechanically robust, thermal shock resistant, and not susceptible to attack by reactive melt additions. The Ames Laboratory operates two close-coupled high pressure gas atomizers. These two atomizers are designed to produce fine and coarse spherical metal powders (5{mu} to 500{mu} diameter) of many different metals and alloys. The systems vary in size, but generally the smaller atomizer can produce up to 5 kg of powder whereas the larger can produce up to 25 kg depending on the charge form and density. In order to make powders of such varying compositions, it is necessary to have melt systems capable of heating and containing the liquid charge to the desired superheat temperature prior to pouring through the atomization nozzle. For some metals and alloys this is not a problem; however for some more reactive and/or high melting materials this can pose unique challenges. Figure 1 is a schematic that illustrates the atomization system and its components.

Byrd, David; Rieken, Joel; Heidloff, Andy; Besser, Matthew; Anderson, Iver

2011-04-01T23:59:59.000Z

374

Educational Multiwavelength Atomic Emission Spectrometer  

E-Print Network [OSTI]

atomic absorption is the capability for simultaneous multielement analysis. It can be used colleges had acquired atomic absorption instruments by the year 1990.[2] In contrast, atomic emission with the acetylene-air flame source taken from an existing atomic absorption instrument. Two spectrometer units

Nazarenko, Alexander

375

Report on Characterization and Processing of MDD Powder  

SciTech Connect (OSTI)

Uranium oxide powers most civilian nuclear reactors worldwide. A large infrastructure based on a well-established technology is in place to support this strategic component of the energy industry. Because uranium oxide fuels are used so ubiquitously, it is expected that ceramic fuel pellets will continue to be used. A better understanding of the properties of the starting materials, the processing methods used to fabricate fuel pellets and how the properties of pellets change in service, are important aspects being studied via experiments, models and simulations. A close integration of these approaches is essential if we are to find new ways to optimize both the fuel composition and structure for the purpose of improving performance, e.g., designed microstructures, reducing process losses, e.g. by net shape sintering, and enabling reprocessing of used fuel; e.g., incorporation of transuranics. Ceramic oxide fuel pellets are typically cold pressed and sintered from a powder feedstock. Consequently, a complete understanding of pellet fabrication requires a thorough knowledge of the process from powder synthesis through quality control and acceptance. In this study, uranium oxide powder synthesized by Modified Direct Denitration (MDD) is evaluated. Use of powders synthesized by novel, simplified approaches such as MDD are both a challenge and an opportunity. The MDD synthesis process offers an opportunity to simplify the fabrication process potentially reducing process losses. MDD also provides a simple path to incorporate transuranics from used fuel reprocessing with minimal handling. The challenge is to demonstrate and ultimately prove the reliability and reproducibility of simplified processing with the performance of fuel pellets experiencing in-pile service. This report summarizes a processing study of uranium oxide pellets made from MDD uranium oxide.

Luther, Erik Paul [Los Alamos National Laboratory

2012-08-21T23:59:59.000Z

376

Low temperature fabrication from nano-size ceramic powders  

SciTech Connect (OSTI)

The objective of the compaction process is to produce a dense green-state compact from a nanosize powder that subsequently can be sintered at high temperatures to form a dense ceramic piece. High density in the green-state after pressing is of primary importance for achieving high densities after sintering. Investigation of the compaction behavior of ceramic powders, therefore, is an important part of characterization of raw ceramic powders and evaluation of their compaction behavior, analysis of interaction between particles, and the study of microstructure of green body (unsintered) during pressure-forming processes. The compaction of nanosize ceramic particles into high density green bodies is very difficult. For the nanosize materials used in this study (amorphous Si{sub 3}N{sub 4} and {gamma} Al{sub 2}O{sub 3}), there is no evidence by TEM of partial sintering after synthesis. Nevertheless, strong aggregation forces, such as the van der Waals surface forces of attraction, exist and result in moderate precursor particle agglomeration. More importantly, these attractive surface forces, which increase in magnitude with decreasing particle size, inhibit interparticle sliding necessary for particle rearrangement to denser bodies during subsequent compaction. Attempts to produce high density green body compacts of nanosize particles, therefore, generally have been focused on overcoming these surface forces of attraction by using either dispersive fluids or high pressures with or without lubricating liquids. In the present work, the use of high pressure has been employed as a means of compacting nanosize powders to relatively high green densities.

Gonzalez, E.J.; Piermarini, G.J.; Hockey, B. [and others

1995-06-01T23:59:59.000Z

377

Powder River Energy Corporation Smart Grid Project | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating Solar Powerstories onFocusOskiPhilips ColorLoading map...ClimatePowder River

378

Powder River, Wyoming: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscot County, Maine:Plug Power IncPowder River Energy Corporation Place:

379

Dispersoid reinforced alloy powder and method of making  

DOE Patents [OSTI]

A method of making dispersion-strengthened alloy particles involves melting an alloy having a corrosion and/or oxidation resistance-imparting alloying element, a dispersoid-forming element, and a matrix metal wherein the dispersoid-forming element exhibits a greater tendency to react with a reactive species acquired from an atomizing gas than does the alloying element. The melted alloy is atomized with the atomizing gas including the reactive species to form atomized particles so that the reactive species is (a) dissolved in solid solution to a depth below the surface of atomized particles and/or (b) reacted with the dispersoid-forming element to form dispersoids in the atomized particles to a depth below the surface of said atomized particles. The atomized alloy particles are solidified as solidified alloy particles or as a solidified deposit of alloy particles. Bodies made from the dispersion strengthened alloy particles, deposit thereof, exhibit enhanced fatigue and creep resistance and reduced wear as well as enhanced corrosion and/or oxidation resistance at high temperatures by virtue of the presence of the corrosion and/or oxidation resistance imparting alloying element in solid solution in the particle alloy matrix.

Anderson, Iver E. (Ames, IA); Terpstra, Robert L. (Ames, IA)

2012-06-12T23:59:59.000Z

380

Method of making quasicrystal alloy powder, protective coatings and articles  

DOE Patents [OSTI]

A method of making quasicrystalline alloy particulates is disclosed wherein an alloy is superheated and the melt is atomized to form generally spherical alloy particulates free of mechanical fracture and exhibiting a predominantly quasicrystalline in the atomized condition structure. The particulates can be plasma sprayed to form a coating or consolidated to form an article of manufacture. 3 figs.

Shield, J.E.; Goldman, A.I.; Anderson, I.E.; Ellis, T.W.; McCallum, R.W.; Sordelet, D.J.

1995-07-18T23:59:59.000Z

Note: This page contains sample records for the topic "iowa powder atomization" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Method of making quasicrystal alloy powder, protective coatings and articles  

DOE Patents [OSTI]

A method of making quasicrystalline alloy particulates wherein an alloy is superheated and the melt is atomized to form generally spherical alloy particulates free of mechanical fracture and exhibiting a predominantly quasicrystalline in the atomized condition structure. The particulates can be plasma sprayed to form a coating or consolidated to form an article of manufacture.

Shield, Jeffrey E. (Sandy, UT); Goldman, Alan I. (Ames, IA); Anderson, Iver E. (Ames, IA); Ellis, Timothy W. (Ames, IA); McCallum, R. William (Ames, IA); Sordelet, Daniel J. (Ames, IA)

1995-07-18T23:59:59.000Z

382

Atomic Force Microscope  

SciTech Connect (OSTI)

The Atomic Force Microscope (AFM) is a recently developed instrument that has achieved atomic resolution imaging of both conducting and non- conducting surfaces. Because the AFM is in the early stages of development, and because of the difficulty of building the instrument, it is currently in use in fewer than ten laboratories worldwide. It promises to be a valuable tool for obtaining information about engineering surfaces and aiding the .study of precision fabrication processes. This paper gives an overview of AFM technology and presents plans to build an instrument designed to look at engineering surfaces.

Day, R.D.; Russell, P.E.

1988-12-01T23:59:59.000Z

383

Atomic Josephson vortices  

SciTech Connect (OSTI)

We show that Josephson vortices in a quasi-one-dimensional atomic Bose Josephson junction can be controllably manipulated by imposing a difference of chemical potentials on the atomic Bose-Einstein condensate waveguides forming the junction. This effect, which has its origin in the Berry phase structure of a vortex, turns out to be very robust in the whole range of the parameters where such vortices can exist. We also propose that a Josephson vortex can be created by the phase imprinting technique and can be identified by a specific tangential feature in the interference picture produced by expanding clouds released from the waveguides.

Kaurov, V. M.; Kuklov, A. B. [Department of Engineering Science and Physics, College of Staten Island, CUNY, Staten Island, New York 10314 (United States)

2006-01-15T23:59:59.000Z

384

Atom Probe Tomography | EMSL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to someone byDear Friend,Arthur J. NozikAtom Probe Tomography Atom Probe

385

Atomic Collapse Observed  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to someone byDear Friend,Arthur J. NozikAtom Probe Tomography Atom

386

Elements & Compounds Atoms (Elements)  

E-Print Network [OSTI]

#12;Elements & Compounds #12;Atoms (Elements) Molecules (Compounds) Cells Elements & Compounds #12 #12;First shell Second shell Third shell Hydrogen 1H Lithium 3Li Sodium 11Na Beryllium 4Be Magnesium energy Higher energy (a) A ball bouncing down a flight of stairs provides an analogy for energy levels

Frey, Terry

387

A technique for the observation of rapid solidification and annealing of powders in a transmission electron microscope  

SciTech Connect (OSTI)

In the recent past, there has been considerable interest in the general area of rapid solidification processing (RSP). It is highly desirable to be able to make observations of not only the as-solidified microstructure of RSP materials, but also to determine its response to thermal excursions. This paper describes a new technique for in-situ studies of such processes where the electron beam in a TEM is used not only for imaging, diffraction and analytical purposes, but also as a local heating source. Thus, when making observations on submicron powders, produced by electrohydrodynamic atomization (EHD), it is possible to anneal and even melt particulate by focusing the electron beam in a controlled manner. The molten droplets can then be rapidly solidified by occluding the beam from the area of interest. A wide range of cooling rates may be achieved, the maximum being at least as rapid as that estimated for the EHD process, about 10/sup 5/ K/s (dependent on powder size). Two examples of the use of this technique are given. The first involves the melting, rapid solidification and subsequent heat treatment of an AL-4.5wt.%Cu alloy. The second is an example of how this technique may be used in studies of the crystallization of metallic glasses, in this case a Cu-45at.%Zr alloy.

Kaufman, M.J.; Fraser, H.L.

1983-01-01T23:59:59.000Z

388

Standard test methods for chemical, mass spectrometric, and spectrochemical analysis of nuclear-grade uranium dioxide powders and pellets  

E-Print Network [OSTI]

1.1 These test methods cover procedures for the chemical, mass spectrometric, and spectrochemical analysis of nuclear-grade uranium dioxide powders and pellets to determine compliance with specifications. 1.2 This test method covers the determination of uranium and the oxygen to uranium atomic ratio in nuclear-grade uranium dioxide powder and pellets. 1.4 This test method covers the determination of chlorine and fluorine in nuclear-grade uranium dioxide. With a 1 to 10-g sample, concentrations of 5 to 200 g/g of chlorine and 1 to 200 ?g/g of fluorine are determined without interference. 1.5 This test method covers the determination of moisture in uranium dioxide samples. Detection limits are as low as 10 ?g. 1.6 This test method covers the determination of nitride nitrogen in uranium dioxide in the range from 10 to 250 ?g. 1.7 This test method covers the spectrographic analysis of nuclear-grade UO2 for the 26 elements in the ranges indicated in Table 2. 1.8 For simultaneous determination of trace ele...

American Society for Testing and Materials. Philadelphia

1999-01-01T23:59:59.000Z

389

Propane tank explosion (2 deaths, 7 injuries) at Herrig Brothers Feather Creek Farm, Albert City, Iowa, April 9, 1998. Investigation report  

SciTech Connect (OSTI)

This report explains the explosion/BLEVE that took place on April 9, 1998, at the Herrig Brothers Feather Creek Farm, located in Albert City, Iowa. Two volunteer fire fighters were killed and seven other emergency response personnel were injured. Safety issues covered in the report include protection of propane storage tanks and piping, state regulatory oversight of such installations, and fire fighter response to propane storage tank fires.

NONE

1999-09-01T23:59:59.000Z

390

Atom-by-atom nucleation and growth of graphene nanopores  

E-Print Network [OSTI]

Atom-by-atom nucleation and growth of graphene nanopores Christopher J. Russoa,b and J. A February 17, 2012 (received for review December 9, 2011) Graphene is an ideal thin membrane substrate structures in graphene with atomic preci- sion. It consists of inducing defect nucleation centers with ener

Golovchenko, Jene A.

391

Structural studies of magnesium nitride fluorides by powder neutron diffraction  

SciTech Connect (OSTI)

Samples of ternary nitride fluorides, Mg{sub 3}NF{sub 3} and Mg{sub 2}NF have been prepared by solid state reaction of Mg{sub 3}N{sub 2} and MgF{sub 2} at 1323-1423 K and investigated by powder X-ray and powder neutron diffraction techniques. Mg{sub 3}NF{sub 3} is cubic (space group: Pm3m) and has a structure related to rock-salt MgO, but with one cation site vacant. Mg{sub 2}NF is tetragonal (space group: I4{sub 1}/amd) and has an anti-LiFeO{sub 2} related structure. Both compounds are essentially ionic and form structures in which nitride and fluoride anions are crystallographically ordered. The nitride fluorides show temperature independent paramagnetic behaviour between 5 and 300 K. - Graphical abstract: Definitive structures of the ternary magnesium nitride fluorides Mg{sub 3}NF{sub 3} and the lower temperature polymorph of Mg{sub 2}NF have been determined from powder neutron diffraction data. The nitride halides are essentially ionic and exhibit weak temperature independent paramagnetic behaviour. Highlights: Black-Right-Pointing-Pointer Definitive structures of Mg{sub 3}NF{sub 3} and Mg{sub 2}NF were determined by neutron diffraction. Black-Right-Pointing-Pointer Nitride and fluoride anions are crystallographically ordered in both structures. Black-Right-Pointing-Pointer Both compounds exhibit weak, temperature independent paramagnetic behaviour. Black-Right-Pointing-Pointer The compounds are essentially ionic with ionicity increasing with F{sup -} content.

Brogan, Michael A. [School of Chemistry, University of Nottingham, Nottingham NG7 2RD (United Kingdom); Hughes, Robert W. [WestCHEM, School of Chemistry, University of Glasgow, Glasgow G12 8QQ (United Kingdom); Smith, Ronald I. [ISIS Pulsed Neutron and Muon Source, Science and Technology Facilities Council, Rutherford Appleton Laboratory, Harwell Oxford, Didcot OX11 0QX (United Kingdom); Gregory, Duncan H., E-mail: Duncan.Gregory@glasgow.ac.uk [WestCHEM, School of Chemistry, University of Glasgow, Glasgow G12 8QQ (United Kingdom)

2012-01-15T23:59:59.000Z

392

Bulk synthesis of nanoporous palladium and platinum powders  

DOE Patents [OSTI]

Disclosed is a method for providing nanoporous palladium and platinum powders. These materials were synthesized on milligram to gram scales by chemical reduction of tetrahalo-complexes with ascorbate in a concentrated aqueous surfactant at temperatures between -20.degree. C. and 30.degree. C. The prepared particles have diameters of approximately 50 nm, wherein each particle is perforated by pores having diameters of approximately 3 nm, as determined by electron tomography. These materials are of potential value for hydrogen and electrical charge storage applications.

Robinson, David B; Fares, Stephen J; Tran, Kim L; Langham, Mary E

2014-04-15T23:59:59.000Z

393

Powder River Energy Corporation (Montana) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating Solar Powerstories onFocusOskiPhilips ColorLoading map...ClimatePowder River Energy

394

QER - Comment of Powder River Energy Corporation | Department of Energy  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power.pdf11-161-LNG |September 15,2015 | DepartmentLoans | Department of Energy20 1 196Powder

395

Bulk synthesis of nanoporous palladium and platinum powders  

DOE Patents [OSTI]

Disclosed is a method for providing nanoporous palladium and platinum powders. These materials were synthesized on milligram to gram scales by chemical reduction of tetrahalo-complexes with ascorbate in a concentrated aqueous surfactant at temperatures between -20.degree. C. and 30.degree. C. The prepared particles have diameters of approximately 50 nm, wherein each particle is perforated by pores having diameters of approximately 3 nm, as determined by electron tomography. These materials are of potential value for hydrogen and electrical charge storage applications.

Robinson, David B. (Fremont, CA); Fares, Stephen J. (Pleasanton, CA); Tran, Kim L. (Livermore, CA); Langham, Mary E. (Pleasanton, CA)

2012-04-17T23:59:59.000Z

396

Atomic phenomena in dense plasmas  

SciTech Connect (OSTI)

The following chapters are included: (1) the plasma environment, (2) perturbations of atomic structure, (3) perturbations of atomic collisions, (4) formation of spectral lines, and (5) dielectronic recombination. (MOW)

Weisheit, J.C.

1981-03-01T23:59:59.000Z

397

A microfabricated atomic clock  

SciTech Connect (OSTI)

Fabrication techniques usually applied to microelectromechanical systems (MEMS) are used to reduce the size and operating power of the core physics assembly of an atomic clock. With a volume of 9.5 mm{sup 3}, a fractional frequency instability of 2.5x10{sup -10} at 1 s of integration, and dissipating less than 75 mW of power, the device has the potential to bring atomically precise timing to hand-held, battery-operated devices. In addition, the design and fabrication process allows for wafer-level assembly of the structures, enabling low-cost mass-production of thousands of identical units with the same process sequence, and easy integration with other electronics.

Knappe, Svenja; Shah, Vishal; Schwindt, Peter D.D.; Hollberg, Leo; Kitching, John; Liew, Li-Anne; Moreland, John [Time and Frequency Division, National Institute of Standards and Technology, Boulder, Colorado 80305-3328 (United States); Electromagnetics Division, National Institute of Standards and Technology, Boulder, Colorado 80305-3328 (United States)

2004-08-30T23:59:59.000Z

398

Delay in Atomic Photoionization  

SciTech Connect (OSTI)

We analyze the time delay between emission of photoelectrons from the outer valence ns and np subshells in noble gas atoms following absorption of an attosecond extreme ultraviolet pulse. Various processes such as elastic scattering of the photoelectron on the parent ion and many-electron correlation affect the apparent 'time zero' when the photoelectron leaves the atom. This qualitatively explains the time delay between photoemission from the 2s and 2p subshells of Ne as determined experimentally by attosecond streaking [Science 328, 1658 (2010)]. However, with our extensive numerical modeling, we were only able to account for less than half of the measured time delay of 21{+-}5 as. We argue that the extreme ultraviolet pulse alone cannot produce such a large time delay and it is the streaking IR field that is most likely responsible for this effect.

Kheifets, A. S. [Research School of Physical Sciences, Australian National University, Canberra ACT 0200 (Australia); Kavli Institute for Theoretical Physics, University of California, Santa Barbara, California 93106-4030 (United States); Ivanov, I. A. [Research School of Physical Sciences, Australian National University, Canberra ACT 0200 (Australia)

2010-12-03T23:59:59.000Z

399

Appendix G: Radiation HYDROGEN ATOM  

E-Print Network [OSTI]

. People are exposed to naturally occurring radiation constantly. For example, cosmic radiation; radon effects on the environment and biological systems. Radiation comes from natural and human-made sourcesAppendix G: Radiation #12;#12;P P P E E E N NN HYDROGEN ATOM DEUTERIUM ATOM TRITIUM ATOM HYDROGEN

Pennycook, Steve

400

Appendix A: Radiation HYDROGEN ATOM  

E-Print Network [OSTI]

. People are exposed to naturally occurring radiation constantly. For example, cosmic radiation; radon effects on the environment and biological systems. Radiation comes from natural and human-made sourcesAppendix A: Radiation #12;P P P E E E N NN HYDROGEN ATOM DEUTERIUM ATOM TRITIUM ATOM HYDROGEN

Pennycook, Steve

Note: This page contains sample records for the topic "iowa powder atomization" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

VARIOUS APPLICATIONS OF ZEEMAN ATOMIC ABSORPTION SPECTROSCOPY  

E-Print Network [OSTI]

APPLICATIONS OF ZEEMAN ATOMIC ABSORPTION SPECTROSCOPYthe Zeeman effect to atomic absorption spectroscopy has beenthe Zeeman effect on atomic absorption spectrometry has been

Koizumi, Hideaki

2011-01-01T23:59:59.000Z

402

atoms: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

with atomic and molecular matter waves is a rich branch of atomic physics and quantum optics. It started with atom diffraction from crystal surfaces and the separated oscillatory...

403

Behavior of the electroless composite films plated from a Ni-P bath with metallic dispersion of Zr and Nb powders  

SciTech Connect (OSTI)

An electroless Ni-Zr-P composite film and a Ni-Nb-P composite film were plated and their heat-treating behaviors were investigated. The addition of 20g dm/sup -3/ of metallic powder resulted in a composite film that contained 21.2 weight percent (w/o) of Zr. (13.8 atom percent (a/o)), or 4.8 w/o of Nb. (2.9 a/o), respectively. Both metallic powders were dispersed uniformly throughout the film. The metallic Ni formed by the crystallization on the Ni-P matrix diffused into the metallic powders, and the amorphous Ni-Zr and Ni-Nb phases were formed by heat-treatment at 500/sup 0/ or 300/sup 0/C. Some parts of the amorphous Ni-Zr phases and the metallic Ni phases combined to form intermetallic compounds by heat-treatment at 600/sup 0/C. The nickel-rich parts of the amorphous Ni-Nb phase were converted into a metastable Ni-Nb phase (zeta phase) or a Ni-Nb solid solution by heat-treatment at 700/sup 0/C. The longer heating time at 400/sup 0/C increased the amount of the Ni-Zr amorphous phase: however, it decreased the reactivity of the amorphous Ni-Zr phase. The same heat-treatment of 400/sup 0/C did not give the considerable change on the amorphous Ni-Nb phase.

Osaka, T.; Koiwa, I.; Usuda, M.; Arai, K.; Saito, I.

1989-04-01T23:59:59.000Z

404

Densification of nanosized alumina powders by hot isostatic pressing (HIP)  

SciTech Connect (OSTI)

The densification of nanosized alumina powders to compacts of nearly theoretical density by Hot Isostatic Pressing was the aim of this work. Three types of powders produced by the so called exploding wire technique in the mesh size between 20 to 80 nm were used. Because of the big internal friction during dry pressing the densities achieved were only in the range of about 30% TD. Therefore it was necessary to use a second post densification step by cold isostatic pressing (CIP). With pressures as high as 750 MPa the authors received a density of 58% TD. The pellets were sealed in capsules of stainless steel which were densified at different temperatures between 900 C and 1,350 C with pressures between 120 and 300 MPa. The resulting compacts were examined by scanning electron microscopy. The resulting phases were determined by X-ray diffraction. Grain size measurement at the as fabricated compacts was a decisive criterion for the success of the experiments.

Weimar, P.; Knitter, R.; Szabo, D.V. [Forschungszentrum, Karlsruhe (Germany); Krauss, W.

1996-12-31T23:59:59.000Z

405

Helium/solid powder O-ring leakage correlation experiments  

SciTech Connect (OSTI)

We have developed a method to test powder leakage that has passed O-ring seals. To validate this method we have spiked a test fixture with 98 ng of U and recovered 130 +- 25 ng of U. We did not detect U at a detection limit of 26 ng in a fixture which was treated as a blank. This method has been applied to the leakage of UO/sub 2/ powder passing the type of EPDM O-ring seals used in a SNM shipping cask belonging to PNC. Considering the three experimental tests in which no or very small quantities of U were detected as effective blank test, it appears that the level of external contamination is negligible. Therefore, we believe that the U quantities greater than 26 ng (6 tests) passed the primary O-ring seal. From this limited quantity of data, we observe no apparent correlation between the amount of U measured and either helium leak rate or equivalent tube diameter. The data for the 130/sup 0/C tests indicate the possibility of a U/time relationship; however, more data are needed for verification.

Leisher, W.B.; Weissman, S.H.; Tallant, D.R.; Kubo, M.

1983-01-01T23:59:59.000Z

406

E-Print Network 3.0 - au powder surfaces Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Mathematics 86 UNCORRECTEDPROOF MSA 21109 19 Summary: size distribution analyzer3 at Praxair 152 Surface Technologies Inc. Both of the powder types had... -xxx Effect of initial...

407

Multi-scale analysis and simulation of powder blending in pharmaceutical manufacturing  

E-Print Network [OSTI]

A Multi-Scale Analysis methodology was developed and carried out for gaining fundamental understanding of the pharmaceutical powder blending process. Through experiment, analysis and computer simulations, microscopic ...

Ngai, Samuel S. H

2005-01-01T23:59:59.000Z

408

Energy efficiency opportunities within the powder coating industry - Energy audit and pinch analysis.  

E-Print Network [OSTI]

??The powder coating industries in Sweden use about 525 GWh of energy every year. The need to reduce the energy use is increasing due to… (more)

Bergek, Charlotte

2011-01-01T23:59:59.000Z

409

E-Print Network 3.0 - amorphous aluminum powder Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

slag... by limestone powder and BFS can lower the cost and enhance the greenness of concrete, since the production Source: Li, Victor C. - Departments of Civil and Environmental...

410

Technical action plan at former Commodity Credit Corporation grain storage sites in Nebraska, Kansas, Iowa, and Missouri. Revision 2  

SciTech Connect (OSTI)

This document has been prepared for the Commodity Credit Corporation of the US Department of Agriculture (CCC/USDA), to provide an outline for a multiyear plan for technical investigations at sites in Kansas and Nebraska that have been identified as having groundwater contamination. Carbon tetrachloride is the primary contaminant of concern at sites in Nebraska and Kansas where former CCC/USDA grain storage facilities were located. At this time, no former CCC/USDA grain bin sites in Iowa and Missouri have been determined to have contamination at or above the maximum concentration level (MCL). This document represents a second revision to an original plan proposed by the CCC/USDA in January 1992 (Technical Action Plan at Former Commodity Credit Corporation Grain Storage Sites in Nebraska and Kansas). The CCC/USDA recognizes the need to address the reported groundwater contamination problems in a timely manner. Doing so will protect public drinking water supplies, public health, and the environment. To address these groundwater contamination problems, the CCC/USDA has committed and continues to commit resources and funding to investigate the contaminated sites further.

Not Available

1993-10-01T23:59:59.000Z

411

Optics and interferometry with atoms and molecules  

E-Print Network [OSTI]

Interference with atomic and molecular matter waves is a rich branch of atomic physics and quantum optics. It started with atom diffraction from crystal surfaces and the separated oscillatory fields technique used in atomic ...

Cronin, Alexander D.

412

Atom Probe Tomography | EMSL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth (AOD)ProductssondeadjustsondeadjustAboutScience Program Cumulus Humilis Aerosol Processing Study (CHAPS)Atom

413

The iron powder test for naphthenic acid corrosion studies  

SciTech Connect (OSTI)

In the course of an ongoing investigation into the phenomenon of naphthenic acid corrosion, a new test method has evolved and is currently being further developed to substitute the total acid number (TAN or neutralization number) as an indicator for naphthenic acid corrosion potential. It can also be used to complement conventional autoclave corrosion tests in high temperature environments, which are based on weight loss of steel coupons. In this new method an oil sample reacts with pure iron powder within an autoclave heated to the testing temperature. The result is based on the amount of dissolved iron found in the oil sample. The oil sample can dissolve an amount of iron for a given time at a given temperature, depending on the naphthenic acid corrosion, since these acids react with iron to produce oil soluble iron naphthenates. This paper describes the method, compares it with conventional crude corrosiveness testing, and proposes it as a new way of measuring naphthenic acid corrosion potential.

Hau, J.L.; Yepez, O.; Specht, M.I.; Lorenzo, R. [PDVSA-Intevep, Caracas (Venezuela)

1999-11-01T23:59:59.000Z

414

Microstructure Evolution of Gas Atomized Iron Based ODS Alloys  

SciTech Connect (OSTI)

In a simplified process to produce precursor powders for oxide dispersion-strengthened (ODS) alloys, gas-atomization reaction synthesis (GARS) was used to induce a surface oxide layer on molten droplets of three differing erritic stainless steel alloys during break-up and rapid solidification. The chemistry of the surface oxide was identified using auger electron spectroscopy (AES) and scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS). The precursor iron-base powders were consolidated at 850 C and 1,300 C using hot isostatic pressing (HIPing). Consolidation at the lower temperature resulted in a fully dense microstructure, while preventing substantial prior particle-boundary-oxide dissociation. Microstructural analysis of the alloys consolidated at the higher temperature confirmed a significant reduction in prior-particle-boundary-oxide volume fraction, in comparison with the lower-temperature-consolidated sample. This provided evidence that a high-temperature internal oxygen-exchange reaction occurred between the metastable prior particle-boundary-oxide phase (chromium oxide) and the yttrium contained within each prior particle. This internal oxygen-exchange reaction is shown to result in the formation of yttrium-enriched oxide dispersoids throughout the alloy microstructure. The evolving microstructure was characterized using transmission electron microscopy (TEM) and high-energy X-ray diffraction (HE-XRD).

Rieken, J.R.; Anderson, I.E.; Kramer, M.J.

2011-08-09T23:59:59.000Z

415

Atomic Energy Commission Takes Over Responsibility for all Atomic...  

National Nuclear Security Administration (NNSA)

Takes Over Responsibility for all Atomic Energy Programs | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile...

416

Shutdown mechanisms for a hypothetical criticality accident involving HEU powder: Preliminary results  

SciTech Connect (OSTI)

This work examines the physical processes that would cause an accidental criticality involving higly enriched uranium(HEU) powder to shut down naturally. The study analyses an excursion resulting from the continous poring of slightly damp HEU powder (either UO{sub 3} or UF{sub 4} containing 1.5% water) onto a concrete floor.

Bentley, C.; Basoglu, B.; Dunn, M.; Plaster, M.; Ruggles, A.; Wilkinson, A.; Yamamoto, T.; Dodds, H. [Univ. of Tennessee, Knoxville, TN (United States)

1994-12-31T23:59:59.000Z

417

Characterization of prealloyed copper powders treated in high energy ball mill  

SciTech Connect (OSTI)

The inert gas atomised prealloyed copper powders containing 3.5 wt.% Al were milled up to 20 h in the planetary ball mill in order to oxidize aluminium in situ with oxygen from the air. In the next procedure compacts from milled powder were synthesized by hot-pressing in argon atmosphere. Compacts from as-received Cu-3.5 wt.% Al powder and electrolytic copper powder were also prepared under the same conditions. Microstructural and morphological changes of high energy milled powder as well as changes of thermal stability and electrical conductivity of compacts were studied as a function of milling time and high temperature exposure at 800 deg. C. Optical, scanning electron microscopy (SEM) and X-ray diffraction analysis were performed for microstructural characterization, whereas thermal stability and electrical conductivity were evaluated by microhardness measurements and conductometer Sigmatest, respectively. The prealloyed 5 h-milled and compacted powder showed a significant increase in microhardness reaching the value of 2600 MPa, about 4 times greater than that of compacts synthesized from as-received electrolytic copper powder (670 MPa). The electrical conductivity of compacts from 5 h-milled powder was 52% IACS. The results were discussed in terms of the effect of small grain size and finely distributed alumina dispersoids on hardening and thermal stability of compacts.

Rajkovic, Viseslava [Institute of Nuclear Sciences 'Vinca', P.O. Box 522, 11001 Belgrade (Serbia and Montenegro)]. E-mail: visnja@vin.bg.ac.yu; Bozic, Dusan [Institute of Nuclear Sciences 'Vinca', P.O. Box 522, 11001 Belgrade (Serbia and Montenegro); Jovanovic, Milan T. [Institute of Nuclear Sciences 'Vinca', P.O. Box 522, 11001 Belgrade (Serbia and Montenegro)

2006-08-15T23:59:59.000Z

418

Preparation of lead-zirconium-titanium film and powder by electrodeposition  

DOE Patents [OSTI]

A process is disclosed for the preparation of lead-zirconium-titanium (PZT) film and powder compositions. The process comprises the steps of providing an electrodeposition bath, providing soluble salts of lead, zirconium and titanium metals to this bath, electrically energizing the bath to thereby direct ions of each respective metal to a substrate electrode and cause formation of metallic particles as a recoverable film of PZT powder on the electrode, and also recovering the resultant film as a powder. Recovery of the PZT powder can be accomplished by continually energizing the bath to thereby cause powder initially deposited on the substrate-electrode to drop therefrom into the bath from which it is subsequently removed. A second recovery alternative comprises energizing the bath for a period of time sufficient to cause PZT powder deposition on the substrate-electrode only, from which it is subsequently recovered. PZT film and powder so produced can be employed directly in electronic applications, or the film and powder can be subsequently oxidized as by an annealing process to thereby produce lead-zirconium-titanium oxide for use in electronic applications. 4 figs.

Bhattacharya, R.N.; Ginley, D.S.

1995-10-31T23:59:59.000Z

419

Sinterable ceramic powders from laser heated gas phase reactions and rapidly solidified ceramic materials : annual report.  

E-Print Network [OSTI]

CO[subscript 2] lasers have been employed to heat reactant gases to synthesize Si, Si[subscript 3] N[subscript 4] and SiC powders. The powders are small, uniform in size, nonagglomerated, highly pure and of controlled ...

Haggerty, John Scarseth

1984-01-01T23:59:59.000Z

420

Cold compaction study of Armstrong Process Ti-6Al-4V powders  

SciTech Connect (OSTI)

This work investigates the cold compaction behavior of Ti-6Al-4V powders produced by Armstrong Process . As-received as well as milled powders were characterized and these powders were uniaxially die-pressed at designated pressures up to 690 MPa to form disk samples with different aspect ratios. Samples with high aspect ratio exhibited non-uniform density along the pressing axis and the density distribution is in consistent with the result predicted by finite element analysis. The linear regression analysis on the experimental density data can be used to predict density of compacts with different aspect ratios. In the studied pressure range, an empirical powder compaction equation represents the green density pressure relationship very well for both the as-received and 1-hr milled Armstrong Ti-6Al-4V powders.

Chen, Wei [ORNL; Yamamoto, Yukinori [ORNL; Peter, William H [ORNL; Gorti, Sarma B [ORNL; Sabau, Adrian S [ORNL; Clark, Michael B [ORNL; Nunn, Stephen D [ORNL; Kiggans, Jim [ORNL; Blue, Craig A [ORNL; Fuller, Brian [International Titanium Powder; Akhtar, Kamal [International Titanium Powder

2011-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "iowa powder atomization" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Causal Factors of Weld Porosity in Gas Tungsten Arc Welding of Powder Metallurgy Produced Titanium Alloys  

SciTech Connect (OSTI)

ORNL undertook an investigation using gas tungsten arc (GTA) welding on consolidated powder metallurgy (PM) titanium (Ti) plate, to identify the causal factors behind observed porosity in fusion welding. Tramp element compounds of sodium and magnesium, residual from the metallothermic reduction of titanium chloride used to produce the titanium, were remnant in the starting powder and were identified as gas forming species. PM-titanium made from revert scrap where sodium and magnesium were absent, showed fusion weld porosity, although to a lesser degree. We show that porosity was attributable to hydrogen from adsorbed water on the surface of the powders prior to consolidation. The removal / minimization of both adsorbed water on the surface of titanium powder and the residues from the reduction process prior to consolidation of titanium powders, are critical to achieve equivalent fusion welding success similar to that seen in wrought titanium produced via the Kroll process.

Muth, Thomas R [ORNL; Yamamoto, Yukinori [ORNL; Frederick, David Alan [ORNL; Contescu, Cristian I [ORNL; Chen, Wei [ORNL; Lim, Yong Chae [ORNL; Peter, William H [ORNL; Feng, Zhili [ORNL

2013-01-01T23:59:59.000Z

422

Rydberg Atoms in Ponderomotive Potentials.  

E-Print Network [OSTI]

??In this thesis, we examine the ponderomotive interaction between an applied optical field and a highly excited Rydberg electron. An atom in a Rydberg state… (more)

Knuffman, Brenton J.

2009-01-01T23:59:59.000Z

423

Absorption properties of identical atoms  

SciTech Connect (OSTI)

Emission rates and other optical properties of multi-particle systems in collective and entangled states differ from those in product ones. We show the existence of similar effects in the absorption probabilities for (anti)symmetrized states of two identical atoms. The effects strongly depend on the overlapping between the atoms and differ for bosons and fermions. We propose a viable experimental verification of these ideas. -- Highlights: •The absorption rates of a pair of identical atoms in product and (anti)symmetrized states are different. •The modifications of the optical properties are essentially determined by the overlapping between the atoms. •The absorption properties differ, in some cases, for bosons and fermions.

Sancho, Pedro, E-mail: psanchos@aemet.es

2013-09-15T23:59:59.000Z

424

Recovery of yttrium from cathode ray tubes and lamps’ fluorescent powders: experimental results and economic simulation  

SciTech Connect (OSTI)

Highlights: • Fluorescent powder of lamps. • Fluorescent powder of cathode ray rubes. • Recovery of yttrium from fluorescent powders. • Economic simulation for the processes to recover yttrium from WEEE. - Abstract: In this paper, yttrium recovery from fluorescent powder of lamps and cathode ray tubes (CRTs) is described. The process for treating these materials includes the following: (a) acid leaching, (b) purification of the leach liquors using sodium hydroxide and sodium sulfide, (c) precipitation of yttrium using oxalic acid, and (d) calcinations of oxalates for production of yttrium oxides. Experimental results have shown that process conditions necessary to purify the solutions and recover yttrium strongly depend on composition of the leach liquor, in other words, whether the powder comes from treatment of CRTs or lamp. In the optimal experimental conditions, the recoveries of yttrium oxide are about 95%, 55%, and 65% for CRT, lamps, and CRT/lamp mixture (called MIX) powders, respectively. The lower yields obtained during treatments of MIX and lamp powders are probably due to the co-precipitation of yttrium together with other metals contained in the lamps powder only. Yttrium loss can be reduced to minimum changing the experimental conditions with respect to the case of the CRT process. In any case, the purity of final products from CRT, lamps, and MIX is greater than 95%. Moreover, the possibility to treat simultaneously both CRT and lamp powders is very important and interesting from an industrial point of view since it could be possible to run a single plant treating fluorescent powder coming from two different electronic wastes.

Innocenzi, V., E-mail: valentina.innocenzi1@univaq.it; De Michelis, I.; Ferella, F.; Vegliò, F.

2013-11-15T23:59:59.000Z

425

Continuous Process for Low-Cost, High-Quality YSZ Powder  

SciTech Connect (OSTI)

This report describes results obtained by NexTech Materials, Ltd. in a project funded by DOE under the auspices of the Solid-State Energy Conversion Alliance (SECA). The project focused on development of YSZ electrolyte powder synthesis technology that could be ''tailored'' to the process-specific needs of different solid oxide fuel cell (SOFC) designs being developed by SECA's industry teams. The work in the project involved bench-scale processing work aimed at establishing a homogeneous precipitation process for producing YSZ electrolyte powder, scaleup of the process to 20-kilogram batch sizes, and evaluation of the YSZ powder products produced by the process. The developed process involved the steps of: (a) preparation of an aqueous hydrous oxide slurry via coprecipitation; (b) washing of residual salts from the precipitated hydroxide slurry followed by drying; (c) calcination of the dried powder to crystallize the YSZ powder and achieve desired surface area; and (d) milling of the calcined powder to targeted particle size. YSZ powders thus prepared were subjected to a comprehensive set of characterization and performance tests, including particle size distribution and surface area analyses, sintering performance studies, and ionic conductivity measurements. A number of different YSZ powder formulations were established, all of which had desirable performance attributes relative to commercially available YSZ powders. Powder characterization and performance metrics that were established at the onset of the project were met or exceeded. A manufacturing cost analysis was performed, and a manufactured cost of $27/kg was estimated based on this analysis. The analysis also allowed an identification of process refinements that would lead to even lower cost.

Scott L. Swartz; Michael Beachy; Matthew M. Seabaugh

2006-03-31T23:59:59.000Z

426

Similarity between positronium-atom and electron-atom scattering  

E-Print Network [OSTI]

We employ the impulse approximation for description of positronium-atom scattering. Our analysis and calculations of Ps-Kr and Ps-Ar collisions provide theoretical explanation of the similarity between the cross sections for positronium scattering and electron scattering for a range of atomic and molecular targets observed by S. J. Brawley et al. [Science 330, 789 (2010)].

Fabrikant, I I

2015-01-01T23:59:59.000Z

427

Coherent Atom Optics with fast metastable rare gas atoms  

SciTech Connect (OSTI)

Coherent atom optics experiments making use of an ultra-narrow beam of fast metastable atoms generated by metastability exchange are reported. The transverse coherence of the beam (coherence radius of 1.7 {mu}m for He*, 1.2 {mu}m for Ne*, 0.87 {mu}m for Ar*) is demonstrated via the atomic diffraction by a non-magnetic 2{mu}m-period reflection grating. The combination of the non-scalar van der Waals (vdW) interaction with the Zeeman interaction generated by a static magnetic field gives rise to ''vdW-Zeeman'' transitions among Zeeman sub-levels. Exo-energetic transitions of this type are observed with Ne*(3P2) atoms traversing a copper micro-slit grating. They can be used as a tunable beam splitter in an inelastic Fresnel bi-prism atom interferometer.

Grucker, J.; Baudon, J.; Karam, J.-C.; Perales, F.; Vassilev, G.; Ducloy, M. [Laboratoire de Physique des Lasers, Universite Paris 13, Avenue J.B. Clement, 93430-Villetaneuse (France); Bocvarski, V. [Institute of Physics, Pregrevica 118, 11080 - Belgrade-Zemun (Serbia and Montenegro)

2006-12-01T23:59:59.000Z

428

Rapid formation of phase-clean 110 K (Bi-2223) powders derived via freeze-drying process  

DOE Patents [OSTI]

A process for the preparation of amorphous precursor powders for Pb-doped Bi.sub.2 Sr.sub.2 Ca.sub.2 Cu.sub.3 O.sub.x (2223) includes a freeze-drying process incorporating a splat-freezing step. The process generally includes splat freezing a nitrate solution of Bi, Pb, Sr, Ca, and Cu to form flakes of the solution without any phase separation; grinding the frozen flakes to form a powder; freeze-drying the frozen powder; heating the dried powder to form a dry green precursor powders; denitrating the green-powders; heating the denitrated powders to form phase-clean Bi-2223 powders. The grain boundaries of the 2223 grains appear to be clean, leading to good intergrain contact between 2223 grains.

Balachandran, Uthamalingam (Hinsdale, IL)

1996-01-01T23:59:59.000Z

429

Novel synthesis of high phase-purity Mg2SnO4 from metallic precursors via powder metallurgy route  

E-Print Network [OSTI]

Novel synthesis of high phase-purity Mg2SnO4 from metallic precursors via powder metallurgy route of composition Mg2Sn was prepared by the conventional powder metallurgy route. This up on heating in air under

Azad, Abdul-Majeed

430

Rapid formation of phase-clean 110 K (Bi-2223) powders derived via freeze-drying process  

DOE Patents [OSTI]

A process for the preparation of amorphous precursor powders for Pb-doped Bi{sub 2}Sr{sub 2} Ca{sub 2}Cu{sub 3}O{sub x} (2223) includes a freeze-drying process incorporating a splat-freezing step. The process generally includes splat freezing a nitrate solution of Bi, Pb, Sr, Ca, and Cu to form flakes of the solution without any phase separation; grinding the frozen flakes to form a powder; freeze-drying the frozen powder; heating the dried powder to form a dry green precursor powders; denitrating the green-powders; heating the denitrated powders to form phase-clean Bi-2223 powders. The grain boundaries of the 2223 grains appear to be clean, leading to good intergrain contact between 2223 grains. 11 figs.

Balachandran, U.

1996-06-04T23:59:59.000Z

431

Application and modeling of near-infrared frequency domain photon migration for monitoring pharmaceutical powder blending operations  

E-Print Network [OSTI]

of blending. A simulation method was developed which consisted of (i) dynamic simulation for generating the powder structure; (ii) the completely-randommixture model for predicting the spatial distribution of API particles within the powder bed; and (iii...

Pan, Tianshu

2006-10-30T23:59:59.000Z

432

A comparison of groundwater recharge estimation methods in the Williston and Powder River structural basins in the Northern Great Plains  

E-Print Network [OSTI]

A comparison of groundwater recharge estimation methods in the Williston and Powder River-water-balance (SWB) model to estimate groundwater recharge in the Williston and Powder River structural basins

Torgersen, Christian

433

E-Print Network 3.0 - atomization atomic absorption Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

atomic absorption Search Powered by Explorit Topic List Advanced Search Sample search results for: atomization atomic absorption Page: << < 1 2 3 4 5 > >> 1 :coherently trapped in...

434

Dispersoid reinforced alloy powder and method of making  

DOE Patents [OSTI]

A method of making dispersion-strengthened alloy particles involves melting an alloy having a corrosion and/or oxidation resistance-imparting alloying element, a dispersoid-forming element, and a matrix metal wherein the dispersoid-forming element exhibits a greater tendency to react with an introduced reactive species than does the alloying element and wherein one or more atomizing parameters is/are modified to controllably reduce the amount of the reactive species, such as oxygen, introduced into the atomized particles so as to reduce anneal times and improve reaction (conversion) to the desired strengthening dispersoids in the matrix. The atomized alloy particles are solidified as solidified alloy particles or as a solidified deposit of alloy particles. Bodies are made from the dispersion strengthened alloy particles, deposit thereof, exhibit enhanced fatigue and creep resistance and reduced wear as well as enhanced corrosion and/or oxidation resistance at high temperatures by virtue of the presence of the corrosion and/or oxidation resistance imparting alloying element in solid solution in the particle alloy matrix.

Anderson, Iver E; Rieken, Joel

2013-12-10T23:59:59.000Z

435

Bogoliubov theory and bosonic atoms  

E-Print Network [OSTI]

We formulate the Bogoliubov variational principle in a mathematical framework similar to the generalized Hartree-Fock theory. Then we analyze the Bogoliubov theory for bosonic atoms in details. We discuss heuristically why the Bogoliubov energy should give the first correction to the leading energy of large bosonic atoms.

Phan Thanh Nam

2011-09-13T23:59:59.000Z

436

Standard test method for carbon (total) in uranium oxide powders and pellets by direct combustion-infrared detection method  

E-Print Network [OSTI]

Standard test method for carbon (total) in uranium oxide powders and pellets by direct combustion-infrared detection method

American Society for Testing and Materials. Philadelphia

2009-01-01T23:59:59.000Z

437

Spectral Emission of Moving Atom  

E-Print Network [OSTI]

A renewed analysis of the H.E. Ives and G.R. Stilwell's experiment on moving hydrogen canal rays (J. Opt. Soc. Am., 1938, v.28, 215) concludes that the spectral emission of a moving atom exhibits always a redshift which informs not the direction of the atom's motion. The conclusion is also evident from a simple energy relation: atomic spectral radiation is emitted as an orbiting electron consumes a portion of its internal energy on transiting to a lower-energy state which however has in a moving atom an additional energy gain; this results in a redshift in the emission frequency. Based on auxiliary experimental information and a scheme for de Broglie particle formation, we give a vigorous elucidation of the mechanism for deceleration radiation of atomic electron; the corresponding prediction of the redshift is in complete agreement with the Ives and Stilwell's experimental formula.

J. X. Zheng-Johansson

2008-03-17T23:59:59.000Z

438

Groundwater recharge estimates for the Powder River and Williston structural basins Katherine R. Aurand and Andrew J. Long  

E-Print Network [OSTI]

Groundwater recharge estimates for the Powder River and Williston structural basins Katherine R Cretaceous aquifer system in the Powder River and Williston structural basins. The study area covers about 75 production in the Powder River structural basin and oil production in the Williston structural basin

Torgersen, Christian

439

Turbulence in Atomic Hydrogen  

E-Print Network [OSTI]

Understanding the properties of interstellar turbulence is a great intellectual challenge and the urge to solve this problem is partially motivated by a necessity to explain the star formation mystery. This review deals with a recently suggested inversion technique as applied to atomic hydrogen. This technique allows to determine 3D turbulence statistics through the variations of 21 cm intensity. We claim that a radio interferometer is an ideal tool for such a study as its visibility function is directly related to the statistics of galactic HI. Next, we show how galactic rotation curve can be used to study the turbulence slice by slice and relate the statistics given in galactic coordinates and in the velocity space. The application of the technique to HI data reveals a shallow spectrum of the underlying HI density that is not compatible with a naive Kolmogorov picture. We show that the random density corresponding to the found spectrum tends to form low contrast filaments that are elongated towards the observer.

A. Lazarian

1998-04-02T23:59:59.000Z

440

Supersonic coal water slurry fuel atomizer  

DOE Patents [OSTI]

A supersonic coal water slurry atomizer utilizing supersonic gas velocities to atomize coal water slurry is provided wherein atomization occurs externally of the atomizer. The atomizer has a central tube defining a coal water slurry passageway surrounded by an annular sleeve defining an annular passageway for gas. A converging/diverging section is provided for accelerating gas in the annular passageway to supersonic velocities.

Becker, Frederick E. (Reading, MA); Smolensky, Leo A. (Concord, MA); Balsavich, John (Foxborough, MA)

1991-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "iowa powder atomization" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Paleotopography and hydrocarbon accumulation: Williston, Powder River, and Denver basins  

SciTech Connect (OSTI)

Recent geomorphic analyses of 1:24,000 scale topographic maps in the three major basins of the northern Great Plains have disclosed a persistent system of basement paleotopographic features that trend north-northeast throughout the region. Superimposed across this system and subtly influenced by it, are the northwesterly trending Laramide structural features. Paleozoic depositional patterns have been strongly influenced by the paleoridge and trough system formed by the north-northeast features. Mesozoic deposition has also been affected by the ancient subsurface system but in a more subtle manner. Many of the Paleozoic and Mezoxoic hydrocarbon locations in the three basins appear to be the results of paleotopographic control on hydrocarbon accumulation sites. This affect ranges from Paleozoic reef sites in the Williston basin through paleotrough localization of Pennsylvanian Minnelusa production in the Powder River basin to fractured Cretaceous Niobrara production at the Silo field in the Denver basin. Basement paleotopography is the underlying factor in all deposition and subsequent hydrocarbon migration in any basin. As such, it should be considered a major factor in the exploration for oil and gas.

Thomas, G.E. (Thomas and Associates, Denver, CO (United States))

1991-06-01T23:59:59.000Z

442

EXPERIMENTS WITH POWDERED CMN THERMOMETERS BETWEEN 10 mK AND 4K, AND A COMPARISON WITH AN NBS SRM 768 FIXED POINT DEVICE  

E-Print Network [OSTI]

EXPERIMENTS WITH POWDERED CMN THERMOMETERS BETWEEN 10 mK ANDof a powdered CHN thermometer with an NBS fixed point devicesuperficially similar CMN thermometers is also presented. c

Fogle, W.E.

2010-01-01T23:59:59.000Z

443

E-Print Network 3.0 - atom traps atomic Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

for: atom traps atomic Page: << < 1 2 3 4 5 > >> 1 An output coupler for Bose condensed atoms The observations of BEC have stimulated interest in atom lasers, coherent sources of...

444

Lessons from Iowa : development of a 270 megawatt compressed air energy storage project in midwest Independent System Operator : a study for the DOE Energy Storage Systems Program.  

SciTech Connect (OSTI)

The Iowa Stored Energy Park was an innovative, 270 Megawatt, $400 million compressed air energy storage (CAES) project proposed for in-service near Des Moines, Iowa, in 2015. After eight years in development the project was terminated because of site geological limitations. However, much was learned in the development process regarding what it takes to do a utility-scale, bulk energy storage facility and coordinate it with regional renewable wind energy resources in an Independent System Operator (ISO) marketplace. Lessons include the costs and long-term economics of a CAES facility compared to conventional natural gas-fired generation alternatives; market, legislative, and contract issues related to enabling energy storage in an ISO market; the importance of due diligence in project management; and community relations and marketing for siting of large energy projects. Although many of the lessons relate to CAES applications in particular, most of the lessons learned are independent of site location or geology, or even the particular energy storage technology involved.

Holst, Kent (Iowa Stored Energy Plant Agency, Traer, IA); Huff, Georgianne; Schulte, Robert H. (Schulte Associates LLC, Northfield, MN); Critelli, Nicholas (Critelli Law Office PC, Des Moines, IA)

2012-01-01T23:59:59.000Z

445

Atoms 2014, 2, 378-381; doi:10.3390/atoms2030378 OPEN ACCESS  

E-Print Network [OSTI]

Atoms 2014, 2, 378-381; doi:10.3390/atoms2030378 OPEN ACCESS atomsISSN 2218-2004 www.mdpi.com/journal/atoms.calisti@univ-amu.fr 3 International Atomic Energy Agency, Atomic and Molecular Data Unit, Nuclear Data Section, P.O. Box for the first two SLSP workshops are for simple atomic systems: the hydrogen atom or hydrogen-like one

446

Chemical factors influencing selenium atomization  

E-Print Network [OSTI]

Atomization. (August 1980) Mary Sue Buren, B, S. , Angelo State University Chairman of Advisory Comm1ttee: Dr. Thomas M. Vickrey Selenium in an acid1c matrix was analyzed using graphite furnace atom1c absorption with Zeeman-effect background correct1on.... Nickel(II} and lanthanum( III) were introduced as matrix modifiers to determine their effect on interferences 1n selenium atom1zation. In add1tion to matr1x mod1ficat1on, surface coating the graphite furnace with z1rconium and tantalum salts was also...

Buren, Mary Sue

1980-01-01T23:59:59.000Z

447

THE INTERACTION OF RARE GAS METASTABLE ATOMS  

E-Print Network [OSTI]

in the study of metastable atom reactions. > 1 it- Fig, laa raetastable rare gas atom, three quantities are necessaryOF iiARE GAS METASTABLF ATOMS Andrew Zun-Foh Wang M a t e r

Wang, A.Z.-F.

2011-01-01T23:59:59.000Z

448

Effects of TiCl4 Purity on the Sinterability of Armstrong-Processed Ti Powder  

SciTech Connect (OSTI)

A series of high purity and low purity powders were synthesized from TiCl4 by the Armstrong process. While both powders displayed swelling when consolidated and sintered, the lower purity powder exhibited this phenomenon in significantly lower degree. The improvement is attributed to the increase in the onset of sintering temperature, which mitigates the entrapment of volatile impurities that would otherwise lead to pore formation and growth. The net effect is that the use of a lower purity TiCl4 may beneficial in two ways: (1) it is a potentially lower cost precursor to Ti powder production and (2) the trace impurities allow higher density components to be fabricated via a typical low-cost press and sinter approach.

Weil, K. Scott; Hovanski, Yuri; Lavender, Curt A.

2009-04-03T23:59:59.000Z

449

Hydrocarbon trapping mechanisms in the Miller Creek area of the Powder River Basin, Wyoming  

E-Print Network [OSTI]

'' 1975 43'W'79 ABSTRACT Hydrocarbon Trapoing Mechanisms in the Miller Creek Area of the Powder River Basin, Wyoming. (May 1975) Jennifer Ann Armstrong, B. S. , University of Texas at Austin Chairman of Advisory Committee: 17r. Robert. R. Berg...

Armstrong, Jennifer Ann

1975-01-01T23:59:59.000Z

450

Combustion of Bulk 84% Fe/16% KCIO{sub 4} heat powder  

SciTech Connect (OSTI)

Fe/KClO{sub 4} pyrotechnic mixtures are used in thermal batteries to provide the heat necessary to bring the battery stack to operating temperatures of 550 to 600 C. This heat source is normally used as discs pressed from bulk powder. To evaluate the consequences associated with unexpected ignition of large amounts of heat powder, combustion of 84% Fe/16% KClO{sub 4} heat powders was conducted for various scenarios under controlled conditions and the response documented. Increasing amounts of heat powder--up to 8 lbs--were ignited in both unconfined and confined (sealed) containers in a remote area. The containers were thermocoupled and the resulting burning filmed with a standard video camera, high-speed (1,000 frames/s) film and video cameras, and an infrared video camera. A 20- minute video of the burning under the various conditions is presented.

Nissen, M.; Guidotti, R.A.; Berry, B.

1996-05-01T23:59:59.000Z

451

Electricity from wood powder report on a TPV generator in progress  

SciTech Connect (OSTI)

A joint project between NREL, SLU, and UCFB aims at building a wood powder fueled TPV generator. The progress of the project is presented. {copyright} {ital 1996 American Institute of Physics.}

Broman, L.; Jarefors, K. [Solar Energy Research Center (SERC), University College of Falun Borlange (UCFB), Box 10044, S-781 10 Borlange (Sweden); Marks, J. [Department of Operational Efficiency, Swedish University of Agricultural Sciences (SLU), Herrgardsv 122, S-776 98 Garpenberg (Sweden); Wanlass, M. [National Renewable Energy Laboratory (NREL), 1617 Cole Blvd., Golden, Colorado 80401-3393, United States of America

1996-02-01T23:59:59.000Z

452

E-Print Network 3.0 - aluminum powder alloy Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Search Powered by Explorit Topic List Advanced Search Sample search results for: aluminum powder alloy Page: << < 1 2 3 4 5 > >> 1 JOURNALDEPHYSIQUE1V ColloqueC7,supplement au...

453

E-Print Network 3.0 - aluminum alloy powder Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Search Powered by Explorit Topic List Advanced Search Sample search results for: aluminum alloy powder Page: << < 1 2 3 4 5 > >> 1 JOURNALDEPHYSIQUE1V ColloqueC7,supplement au...

454

E-Print Network 3.0 - aluminum nitride powder Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

the original powder. An FTIR study was done using the KBr technique and a high... , a reduction in the content of adsorbed water was observed, compared to the original ... Source:...

455

E-Print Network 3.0 - al-mo powder processing Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

the critical transition temperature and the critical current density of the processed powder by magnetic... h and Jc of the order of 106 A cm-2 at 4 K. The superconducting...

456

Transient liquid-phase infiltration of a powder-metal skeleton  

E-Print Network [OSTI]

Transient Liquid-Phase Infiltration (TLI) is a new method for densifying a powder-metal skeleton that produces a final part of homogeneous composition without significant dimensional change, unlike traditional infiltration ...

Lorenz, Adam Michael, 1974-

2002-01-01T23:59:59.000Z

457

alloyed fe-mo powder: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

- TxSpace Summary: The research in this thesis covers the design and implementation of a depleted uranium (DU) powder production system and the initial results of a DU-Zr-Mg alloy...

458

alloyed al-ti powders: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

- TxSpace Summary: The research in this thesis covers the design and implementation of a depleted uranium (DU) powder production system and the initial results of a DU-Zr-Mg alloy...

459

A simple and clean source of low-energy atomic carbon  

SciTech Connect (OSTI)

A carbon source emitting low-energy carbon atoms from a thin-walled, sealed tantalum tube via thermal evaporation has been constructed. The tube is made from a 0.05?mm thick tantalum foil and filled with {sup 12}C or {sup 13}C carbon powder. After being sealed, it is heated by direct electric current. The solvated carbon atoms diffuse to the outer surface of the tube and, when the temperature rises over 2200?K, the evaporation of atomic carbon from the surface of the tantalum tube is observed. As the evaporated species have low energy they are well-suited for the incorporation into liquid helium droplets by the pick-up technique. Mass analysis of the incorporated species reveals the dominant presence of atomic carbon and very low abundances of C{sub 2} and C{sub 3} molecules (<1%). This is in striking contrast to the thermal evaporation of pure carbon, where C{sub 3} molecules are found to be the dominant species in the gas phase. Due to the thermal evaporation and the absence of high-energy application required for the dissociation of C{sub 2} and C{sub 3} molecules, the present source provides carbon atoms with rather low energy.

Krasnokutski, S. A.; Huisken, F. [Laboratory Astrophysics Group of the Max Planck Institute for Astronomy at the Friedrich Schiller University Jena, Helmholtzweg 3, D-07743 Jena (Germany)

2014-09-15T23:59:59.000Z

460

Imaging atoms in 3-D  

SciTech Connect (OSTI)

Berkeley Lab's Peter Ercius discusses "Imaging atoms in 3-D" in this Oct. 28, 2013 talk, which is part of a Science at the Theater event entitled Eight Big Ideas

Ercius, Peter

2013-10-31T23:59:59.000Z

Note: This page contains sample records for the topic "iowa powder atomization" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Imaging atoms in 3-D  

ScienceCinema (OSTI)

Berkeley Lab's Peter Ercius discusses "Imaging atoms in 3-D" in this Oct. 28, 2013 talk, which is part of a Science at the Theater event entitled Eight Big Ideas

Ercius, Peter

2014-06-27T23:59:59.000Z

462

Two methods for characterizing the compaction and ejection behavior of metal powders in a die  

E-Print Network [OSTI]

TWO METHODS FOR CHARACTERIZING THE COMPACTION AND EJECTION BEHAVIOR OF METAL POWDERS IN A DIE A Thesis by RICHARD JAMES SAJDAK Submitted to the Graduate College of Texas A&M University in partial fulfillment of the requirement for the degree... of Committee) (Head of Departme t) &ci- (51embor) (Flember) May 1969 ABSTRACT Two Methods for Characterizing the Compaction and Ejection Behavior of Metal Powders In a Die. (May 1969) Richard James Sajdak, B. S. , University of Wyoming M. S. , Texas A...

Sajdak, Richard James

1969-01-01T23:59:59.000Z

463

Chemical vapor deposited diamond-on-diamond powder composites (LDRD final report)  

SciTech Connect (OSTI)

Densifying non-mined diamond powder precursors with diamond produced by chemical vapor infiltration (CVI) is an attractive approach for forming thick diamond deposits that avoids many potential manufacturability problems associated with predominantly chemical vapor deposition (CVD) processes. The authors developed techniques for forming diamond powder precursors and densified these precursors in a hot filament-assisted reactor and a microwave plasma-assisted reactor. Densification conditions were varied following a fractional factorial statistical design. A number of conclusions can be drawn as a result of this study. High density diamond powder green bodies that contain a mixture of particle sizes solidify more readily than more porous diamond powder green bodies with narrow distributions of particle sizes. No composite was completely densified although all of the deposits were densified to some degree. The hot filament-assisted reactor deposited more material below the exterior surface, in the interior of the powder deposits; in contrast, the microwave-assisted reactor tended to deposit a CVD diamond skin over the top of the powder precursors which inhibited vapor phase diamond growth in the interior of the powder deposits. There were subtle variations in diamond quality as a function of the CVI process parameters. Diamond and glassy carbon tended to form at the exterior surface of the composites directly exposed to either the hot filament or the microwave plasma. However, in the interior, e.g. the powder/substrate interface, diamond plus diamond-like-carbon formed. All of the diamond composites produced were grey and relatively opaque because they contained flawed diamond, diamond-like-carbon and glassy carbon. A large amount of flawed and non-diamond material could be removed by post-CVI oxygen heat treatments. Heat treatments in oxygen changed the color of the composites to white.

Panitz, J.K.; Hsu, W.L.; Tallant, D.R.; McMaster, M.; Fox, C.; Staley, D.

1995-12-01T23:59:59.000Z

464

Absorption properties of identical atoms  

E-Print Network [OSTI]

Emission rates and other optical properties of multiparticle systems in collective and entangled states differ from those in product ones. We show the existence of similar effects in the absorption probabilities for (anti)symmetrized states of two identical atoms. The effects strongly depend on the overlapping between the atoms and differ for bosons and fermions. We propose a viable experimental verification of these ideas.

Pedro Sancho

2013-07-31T23:59:59.000Z

465

Recent Progress in ultracold atoms  

E-Print Network [OSTI]

, cold gas experiments 2. How to make a BEC out of fermions 3. Recent Progress: Controlling Interaction (Feshbach Resonance) 4. From BCS to BEC: Rotating trap and spin- polarized condensates. 5. Future research and Einstein What is Bose-Einstein condensation (BEC)? #12;300 K to 1 mK 109 atoms 1 mK to 1 mK 108 106 atoms

Baltisberger, Jay H.

466

Combustion characteristics of dry coal-powder-fueled adiabatic diesel engine: Final report  

SciTech Connect (OSTI)

This report describes the progress and findings of a research program aimed at investigating the combustion characteristics of dry coal powder fueled diesel engine. During this program, significant achievements were made in overcoming many problems facing the coal-powder-fueled engine. The Thermal Ignition Combustion System (TICS) concept was used to enhance the combustion of coal powder fuel. The major coal-fueled engine test results and accomplishments are as follows: design, fabrication and engine testing of improved coal feed system for fumigation of coal powder to the intake air; design, fabrication and engine testing of the TICS chamber made from a superalloy material (Hastelloy X); design, fabrication and engine testing of wear resistant chrome oxide ceramic coated piston rings and cylinder liner; lubrication system was improved to separate coal particles from the contaminated lubricating oil; control of the ignition timing of fumigated coal powder by utilizing exhaust gas recirculation (EGR) and variable TICS chamber temperature; coal-fueled engine testing was conducted in two configurations: dual fuel (with diesel pilot) and 100% coal-fueled engine without diesel pilot or heated intake air; cold starting of the 100% coal-powder-fueled engine with a glow plug; and coal-fueled-engine was operated from 800 to 1800 rpm speed and idle to full load engine conditions.

Kakwani, R.M.; Kamo, R.

1989-01-01T23:59:59.000Z

467

Inhalation carcinogenicity study with nickel metal powder in Wistar rats  

SciTech Connect (OSTI)

Epidemiological studies of nickel refinery workers have demonstrated an association between increased respiratory cancer risk and exposure to certain nickel compounds (later confirmed in animal studies). However, the lack of an association found in epidemiological analyses for nickel metal remained unconfirmed for lack of robust animal inhalation studies. In the present study, Wistar rats were exposed by whole-body inhalation to 0, 0.1, 0.4, and 1.0 mg Ni/m{sup 3} nickel metal powder (MMAD = 1.8 {mu}m, GSD = 2.4 {mu}m) for 6 h/day, 5 days/week for up to 24 months. A subsequent six-month period without exposures preceded the final euthanasia. High mortality among rats exposed to 1.0 mg Ni/m{sup 3} nickel metal resulted in the earlier termination of exposures in this group. The exposure level of 0.4 mg Ni/m{sup 3} was established as the MTD for the study. Lung alterations associated with nickel metal exposure included alveolar proteinosis, alveolar histiocytosis, chronic inflammation, and bronchiolar-alveolar hyperplasia. No increased incidence of neoplasm of the respiratory tract was observed. Adrenal gland pheochromocytomas (benign and malignant) in males and combined cortical adenomas/carcinomas in females were induced in a dose-dependent manner by the nickel metal exposure. The incidence of pheochromocytomas was statistically increased in the 0.4 mg Ni/m{sup 3} male group. Pheochromocytomas appear to be secondary to the lung toxicity associated with the exposure rather than being related to a direct nickel effect on the adrenal glands. The incidence of cortical tumors among 0.4 mg Ni/m{sup 3} females, although statistically higher compared to the concurrent controls, falls within the historical control range; therefore, in the present study, this tumor is of uncertain relationship to nickel metal exposure. The lack of respiratory tumors in the present animal study is consistent with the findings of the epidemiological studies.

Oller, Adriana R. [NiPERA, 2605 Meridian Parkway, Suite 200, Durham, NC 27713 (United States)], E-mail: aoller@nipera.org; Kirkpatrick, Daniel T.; Radovsky, Ann [WIL Research Laboratories, LLC, 1407 George Road, Ashland, OH 44805 8946 (United States); Bates, Hudson K. [NiPERA, 2605 Meridian Parkway, Suite 200, Durham, NC 27713 (United States)

2008-12-01T23:59:59.000Z

468

Selfish atom selects quantum resonances at fractional atomic frequencies  

E-Print Network [OSTI]

We show that the atom as a "quantum entity", driven by an external field in the form of pulse sequence at repetition rate equal to the internal quantum frequency divided by an integer n, responds resonantly. It seeks and finds its characteristic frequencies in any possible combination of its frequencies. This is an indication of self expression by the atom at many sub-frequencies of its own transition frequencies. It is a non-intuitive phenomenon since the external repetition rate has no quantum character, yet the atom responds to it if the rate is equal to 1/n its eigen-frequency. We believe that our results will have implications in other quantum related processes, such as resonant enhancement of chemical reactions and biological processes.

Gennady A. Koganov; Reuben Shuker

2014-09-17T23:59:59.000Z

469

RICE UNIVERSITY Ultracold Collisions in Atomic Strontium  

E-Print Network [OSTI]

RICE UNIVERSITY Ultracold Collisions in Atomic Strontium by Sarah B. Nagel A Thesis Submitted Houston, Texas February, 2008 #12;Abstract Ultracold Collisions in Atomic Strontium by Sarah B. Nagel In this work with atomic Strontium, the atoms are first laser cooled and subse- quently trapped, in a MOT

Killian, Thomas C.

470

Accelerometer using atomic waves for space applications  

E-Print Network [OSTI]

of Bose-Einstein condensation (BEC) of a dilute gas of trapped atoms in a single quantum state [18, 19, 20 of such devices in the field of navigation, surveying and analysis of earth structures. Matter-wave interferometry that the use of Bose-Einstein condensed atoms will bring the science of atom optics, and in particular atom

471

Atomic Cascade in Muonic and Hadronic Hydrogen Atoms  

E-Print Network [OSTI]

The atomic cascade in $\\mu^- p$ and $\\pi^- p$ atoms has been studied with the improved version of the extended cascade model in which new quantum mechanical calculations of the differential and integral cross sections of the elastic scattering, Stark transitions and Coulomb de-excitation have been included for the principal quantum number values $n\\le 8$ and the relative energies $E \\ge 0.01$ eV. The $X$-ray yields and kinetic energy distributions are compared with the experimental data.

T. S. Jensen; V. P. Popov; V. N. Pomerantsev

2007-12-18T23:59:59.000Z

472

Observation of relativistic antihydrogen atoms  

SciTech Connect (OSTI)

An observation of relativistic antihydrogen atoms is reported in this dissertation. Experiment 862 at Fermi National Accelerator Laboratory observed antihydrogen atoms produced by the interaction of a circulating beam of high momentum (3 < p < 9 GeV/c) antiprotons and a jet of molecular hydrogen gas. Since the neutral antihydrogen does not bend in the antiproton source magnets, the detectors could be located far from the interaction point on a beamline tangent to the storage ring. The detection of the antihydrogen is accomplished by ionizing the atoms far from the interaction point. The positron is deflected by a magnetic spectrometer and detected, as are the back to back photons resulting from its annihilation. The antiproton travels a distance long enough for its momentum and time of flight to be measured accurately. A statistically significant sample of 101 antihydrogen atoms has been observed. A measurement of the cross section for {bar H}{sup 0} production is outlined within. The cross section corresponds to the process where a high momentum antiproton causes e{sup +} e{sup -} pair creation near a nucleus with the e{sup +} being captured by the antiproton. Antihydrogen is the first atom made exclusively of antimatter to be detected. The observation experiment's results are the first step towards an antihydrogen spectroscopy experiment which would measure the n = 2 Lamb shift and fine structure.

Blanford, Glenn DelFosse

1998-01-01T23:59:59.000Z

473

Quantum Electrodynamics of Atomic Resonances  

E-Print Network [OSTI]

A simple model of an atom interacting with the quantized electromagnetic field is studied. The atom has a finite mass $m$, finitely many excited states and an electric dipole moment, $\\vec{d}_0 = -\\lambda_{0} \\vec{d}$, where $\\| d^{i}\\| = 1,$ $ i=1,2,3,$ and $\\lambda_0$ is proportional to the elementary electric charge. The interaction of the atom with the radiation field is described with the help of the Ritz Hamiltonian, $-\\vec{d}_0\\cdot \\vec{E}$, where $\\vec{E}$ is the electric field, cut off at large frequencies. A mathematical study of the Lamb shift, the decay channels and the life times of the excited states of the atom is presented. It is rigorously proven that these quantities are analytic functions of the momentum $\\vec{p}$ of the atom and of the coupling constant $\\lambda_0$, provided $|\\vec{p}| < mc$ and $| \\Im\\vec{p} |$ and $| \\lambda_{0} |$ are sufficiently small. The proof relies on a somewhat novel inductive construction involving a sequence of `smooth Feshbach-Schur maps' applied to a complex dilatation of the original Hamiltonian, which yields an algorithm for the calculation of resonance energies that converges super-exponentially fast.

Miguel Ballesteros; Jérémy Faupin; Jürg Fröhlich; Baptiste Schubnel

2015-03-09T23:59:59.000Z

474

Electric Transmission Lines (Iowa)  

Broader source: Energy.gov [DOE]

Electric transmission lines capable of operating at 69 kV or greater cannot be constructed along, across, or over any public highways or grounds outside of cities without a franchise from the...

475

Liquefied Natural Gas (Iowa)  

Broader source: Energy.gov [DOE]

This document adopts the standards promulgated by the National Fire Protection Association as rules for the transportation, storage, handling, and use of liquefied natural gas. The NFPA standards...

476

Controlling Pollution (Iowa)  

Broader source: Energy.gov [DOE]

Permits are required for new or existing stationary potential sources of pollution, including anaerobic lagoons. Permits may also be required for modifications that may increase emissions. These...

477

Environmental Management Systems (Iowa)  

Broader source: Energy.gov [DOE]

A solid waste planning area (e.g., the land encompassed by a municipality with a comprehensive solid waste management policy) may qualify to be an Environmental Management System if it provides...

478

Dams – Fishways (Iowa)  

Broader source: Energy.gov [DOE]

No permanent dam or obstruction may be placed in the waters of the state without providing for fish passage.

479

Protected Water Sources (Iowa)  

Broader source: Energy.gov [DOE]

This chapter designates protected water sources, which are subject to additional special conditions regarding water use. Permit applications for water withdrawals from these sources may still be...

480

Joint Electrical Utilities (Iowa)  

Broader source: Energy.gov [DOE]

Cities may establish utilities to acquire existing electric generating facilities or distribution systems. Acquisition, in this statute, is defined as city involvement, and includes purchase, lease...

Note: This page contains sample records for the topic "iowa powder atomization" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Solid Waste Policies (Iowa)  

Broader source: Energy.gov [DOE]

This statute establishes the support of the state for alternative waste management practices that reduce the reliance upon land disposal and incorporate resource recovery. Cities and counties are...

482

Iowa Natural Gas Prices  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30Natural Gas Glossary529 6330 0 14 15 0 0 0Year

483

Coal Mining (Iowa)  

Broader source: Energy.gov [DOE]

These sections describe procedures for coal exploration and extraction, as well as permitting requirements relating to surface and underground coal mining. These sections also address land...

484

Iowa State University Engineering  

E-Print Network [OSTI]

(MCA) Pg. 13 National Association of Home Builders (NAHB) Pg. 14 National Organization discipline to join our team of builders. Alpha Pi Mu (APM) Industrial Honor Society The purpose of APM

Lin, Zhiqun

485

Public Utility Regulation (Iowa)  

Broader source: Energy.gov [DOE]

This section applies to any person, partnership, business association, or corporation that owns or operates any facilities for furnishing gas by piped distribution system, electricity,...

486

Atomizing, continuous, water monitoring module  

DOE Patents [OSTI]

A system for continuously analyzing volatile constituents of a liquid is described. The system contains a pump for continuously pumping the liquid to be tested at a predetermined flow rate into an extracting container through a liquid directing tube having an orifice at one end and positioned to direct the liquid into the extracting container at a flow rate sufficient to atomize the liquid within the extracting container. A continuous supply of helium carrier gas at a predetermined flow rate is directed through a tube into the extracting container and co-mingled with the atomized liquid to extract the volatile constituents contained within the atomized liquid. The helium containing the extracted volatile constituents flows out of the extracting container into a mass spectrometer for an analysis of the volatile constituents of the liquid.

Thompson, Cyril V. (Knoxville, TN); Wise, Marcus B. (Kingston, TN)

1997-01-01T23:59:59.000Z

487

Atomizing, continuous, water monitoring module  

DOE Patents [OSTI]

A system for continuously analyzing volatile constituents of a liquid is described. The system contains a pump for continuously pumping the liquid to be tested at a predetermined flow rate into an extracting container through a liquid directing tube having an orifice at one end and positioned to direct the liquid into the extracting container at a flow rate sufficient to atomize the liquid within the extracting container. A continuous supply of helium carrier gas at a predetermined flow rate is directed through a tube into the extracting container and co-mingled with the atomized liquid to extract the volatile constituents contained within the atomized liquid. The helium containing the extracted volatile constituents flows out of the extracting container into a mass spectrometer for an analysis of the volatile constituents of the liquid. 3 figs.

Thompson, C.V.; Wise, M.B.

1997-07-08T23:59:59.000Z

488

Degeneracy Breaking of Hydrogen Atom  

E-Print Network [OSTI]

The three dimensional rotation group, SO(3), is a symmetry group of the normal hydrogen atom. Each reducible representation of this group can be associated with a degenerate energy level. If this atom is placed in an external magnetic field, the interaction between the orbital magnetic moment with this field will lead to a symmetry breaking where the symmetry group of the atom is a new group distinct from the SO(3) group. This phenomenon describes the normal Zeeman effect, where a degenerate energy level splits into several new energy levels. It is explicitly shown that each of the new energy levels can be associated with an irreducible representation of the new symmetry group.

Agung Trisetyarso; Pantur Silaban

2014-11-21T23:59:59.000Z

489

Enery Efficient Press and Sinter of Titanium Powder for Low-Cost Components in Vehicle Applications  

SciTech Connect (OSTI)

This is the final technical report for the Department of Energy NETL project NT01931 Energy Efficient Press and Sinter of Titanium Powder for Low-Cost Components in Vehicle Applications. Titanium has been identified as one of the key materials with the required strength that can reduce the weight of automotive components and thereby reduce fuel consumption. Working with newly developed sources of titanium powder, Webster-Hoff will develop the processing technology to manufacture low cost vehicle components using the single press/single sinter techniques developed for iron based powder metallurgy today. Working with an automotive or truck manufacturer, Webster-Hoff will demonstrate the feasibility of manufacturing a press and sinter titanium component for a vehicle application. The project objective is two-fold, to develop the technology for manufacturing press and sinter titanium components, and to demonstrate the feasibility of producing a titanium component for a vehicle application. The lowest cost method for converting metal powder into a net shape part is the Powder Metallurgy Press and Sinter Process. The method involves compaction of the metal powder in a tool (usually a die and punches, upper and lower) at a high pressure (up to 60 TSI or 827 MPa) to form a green compact with the net shape of the final component. The powder in the green compact is held together by the compression bonds between the powder particles. The sinter process then converts the green compact to a metallurgically bonded net shape part through the process of solid state diffusion. The goal of this project is to expand the understanding and application of press and sinter technology to Titanium Powder applications, developing techniques to manufacture net shape Titanium components via the press and sinter process. In addition, working with a vehicle manufacturer, demonstrate the feasibility of producing a titanium component for a vehicle. This is not a research program, but rather a project to develop a process for press and sinter of net shape Titanium components. All of these project objectives have been successfully completed.

Thomas Zwitter; Phillip Nash; Xiaoyan Xu; Chadwick Johnson

2011-03-31T23:59:59.000Z

490

Aerosols Generated by Free Fall Spills of Powders and Solutions in Static Air  

SciTech Connect (OSTI)

Safety assessments and environmental impact statements for nuclear fuel cycle facilities require an estimation of potential airborne releases. Aerosols generated by accidents are being investigated to develop the source terms for these releases. The lower boundary accidental release event would be a free fall spill of powders or liquids in static air. Experiments measured the mass airborne and particle size distribution of these aerosols for various source sizes and spill heights. Two powder and liquid sources were used: Ti02 and uo2; and aqueous uranine (sodium fluorescein) and uranyl nitrate solutions. Spill height and source size were significant in releases of both powders and liquids. For the source powders used (l "m uo2 and 1.7 "m Ti0 2, quantities from 25 g to 1000 g, and fall heights of 1 m and 3m), the maximum source airborne was 0.12%. The maximum source airborne was an order of magnitude less for the liquids (with source quantities ranging from 125 to 1000 cc at the same fall heights). The median aerodynamic equivalent diameters for collected airborne powder ranged from 6 to 26.5 "m; liquids ranged from 4.1 to 34 "m. All of the spills produced a significant fraction of respirable particles 10 ~m and less.

Sutter, S. L.; Johnston, J. W.; Mishima, J.

1981-12-01T23:59:59.000Z

491

OPTIMIZATION OF CUTTING CONDITIONS FOR SUSTAINABLE MACHINING OF SINTERED POWDER METAL STEELS USING PCBN AND CARBIDE TOOLS.  

E-Print Network [OSTI]

??Powder metals are becoming a popular choice in the automotive and other manufacturing industries because of their ability to meet wide ranging product functional requirements… (more)

Joshi, Kunal J.

2006-01-01T23:59:59.000Z

492

E-Print Network 3.0 - al-al2o3 nanocomposite powder Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

449451 (2007) 4650 Hardness and wear resistance of carbon Summary: , calcination and reduction. The molecular level process produces CNTCu nanocomposite powders, in which... the...

493

Photoabsorption by Ions and Atoms  

SciTech Connect (OSTI)

Recent progress in theoretical and experimental investigations of photoabsorption by atoms and ions is presented. Specifically, examples of near-chaotic behavior in photoionization of positive ions, low-energy manifestations of nondipole effects, high-energy breakdown of the single particle picture and new phenomenology uncovered in the inner-shell photoabsorption by negative ions are discussed.

Manson, Steven T. [Department of Physics and Astronomy, Georgia State University, Atlanta, Georgia 30303 (United States)

2004-12-01T23:59:59.000Z

494

Realization of a superconducting atom chip  

E-Print Network [OSTI]

We have trapped rubidium atoms in the magnetic field produced by a superconducting atom chip operated at liquid Helium temperatures. Up to $8.2\\cdot 10^5$ atoms are held in a Ioffe-Pritchard trap at a distance of 440 $\\mu$m from the chip surface, with a temperature of 40 $\\mu$K. The trap lifetime reaches 115 s at low atomic densities. These results open the way to the exploration of atom--surface interactions and coherent atomic transport in a superconducting environment, whose properties are radically different from normal metals at room temperature.

Thomas Nirrengarten; Angie Qarry; Cédric Roux; Andreas Emmert; Gilles Nogues; Michel Brune; Jean-Michel Raimond; Serge Haroche

2006-10-09T23:59:59.000Z

495

MnO spin-wave dispersion curves from neutron powder diffraction  

SciTech Connect (OSTI)

We describe a model-independent approach for the extraction of spin-wave dispersion curves from powder neutron total scattering data. Our approach is based on a statistical analysis of real-space spin configurations to calculate spin-dynamical quantities. The RMCPROFILE implementation of the reverse Monte Carlo refinement process is used to generate a large ensemble of supercell spin configurations from MnO powder diffraction data collected at 100 K. Our analysis of these configurations gives spin-wave dispersion curves for MnO that agree well with those determined independently using neutron triple-axis spectroscopic techniques.

Goodwin, Andrew L.; Dove, Martin T. [Department of Earth Sciences, Cambridge University, Downing Street, Cambridge CB2 3EQ (United Kingdom); Tucker, Matthew G. [ISIS Facility, Rutherford Appleton Laboratory, Chilton, Didcot, Oxfordshire OX11 0QX (United Kingdom); Keen, David A. [ISIS Facility, Rutherford Appleton Laboratory, Chilton, Didcot, Oxfordshire OX11 0QX (United Kingdom); Department of Physics, Oxford University, Clarendon Laboratory, Parks Road, Oxford OX1 3PU (United Kingdom)

2007-02-15T23:59:59.000Z

496

Conversion method of powder inelastic scattering data for one-dimensional systems  

SciTech Connect (OSTI)

Extracting dispersive magnetic excitations from inelastic neutron scattering data usually requires large single crystals. We present a simple yet powerful method for extracting such information from polycrystalline or powder data for one-dimensional systems. We demonstrate the effectiveness of this data treatment by extracting dispersion curves from powder inelastic neutron scattering data on the one-dimensional spin-half systems: CuGeO3 and Rb2Cu2Mo3O12. For many such materials it is not possible to grow sufficiently large crystals and this method offers a quick and efficient way to study their magnetic excitations.

Tomiyasu, Dr. Keisuke [Tohoku University, Japan; Fujita, Prof. Masaki [Tohoku University, Japan; Kolesnikov, Alexander I [ORNL; Bewley, Robert I. [ISIS Facility, Rutherford Appleton Laboratory; Bull, Dr. Martyn J. [ISIS Facility, Rutherford Appleton Laboratory; Bennington, Dr. Stephen M. [ISIS Facility, Rutherford Appleton Laboratory

2009-01-01T23:59:59.000Z

497

A Semi-Empirical Model Relating Flow Properties to Particle Contacts in Fine Binary Powder Mixtures  

E-Print Network [OSTI]

zone to 7 the onset of incipient flow is of wide benefit to a range of granular systems beyond EP 8 printing devices such as the processes of powder materials in pharmaceutical and food 9 industrials. 10 However, despite its importance, the number... additives have only a small effect on the internal friction [20]. In this study, 12 nm 17 hydrophobic silica nanoparticles, Aerosil® R805 (Evonik Industries, Germany), were chosen 18 as the surface additives for the PS-DVB powder particles. The BET surface...

Kojima, Takehiro; Elliott, James A.

2014-08-20T23:59:59.000Z

498

Method for molding ceramic powders using a water-based gel casting  

DOE Patents [OSTI]

A method for molding ceramic powders comprises forming a slurry mixture including ceramic powder, a dispersant, and a monomer solution. The monomer solution includes at least one monofunctional monomer and at least one difunctional monomer, a free-radical initiator, and a aqueous solvent. The slurry mixture is transferred to a mold, and the mold containing the slurry mixture is heated to polymerize and crosslink the monomer and form a firm polymer-solvent gel matrix. The solid product any be removed from the mold and heated to first remove the solvent and subsequently remove the polymer, whereafter the product may be sintered.

Janney, Mark A. (Knoxville, TN); Omatete, Ogbemi O. (Lagos, NG)

1991-07-02T23:59:59.000Z

499

Method for molding ceramic powders using a water-based gel casting process  

DOE Patents [OSTI]

A method for molding ceramic powders comprises forming a slurry mixture including ceramic powder, a dispersant, and a monomer solution. The monomer solution includes at least one monofunctional monomer and at least one difunctional monomer, a free-radical initiator, and a aqueous solvent. The slurry mixture is transferred to a mold, and the mold containing the slurry mixture is heated to polymerize and crosslink the monomer and form a firm polymer-solvent gel matrix. The solid product may be removed from the mold and heated to first remove the solvent and subsequently remove the polymer, whereafter the product may be sintered.

Jenny, Mark A. (Knoxville, TN); Omalete, Ogbemi O. (Lagos, NG)

1992-09-08T23:59:59.000Z

500

Role of atomic collisions in fusion  

SciTech Connect (OSTI)

Atomic physics issues have played a large role in controlled fusion research. A general discussion of the present role of atomic processes in both magnetic and inertial controlled fusion work is presented.

Post, D.E.

1982-04-01T23:59:59.000Z