National Library of Energy BETA

Sample records for inventory lci forms

  1. LCI Newsletter

    Broader source: Energy.gov [DOE]

    Welcome to the U.S. Life Cycle Inventory Database Newsletter. This newsletter covers news and updates about the database and is published quarterly. Learn more about the Life Cycle Inventory (LCI)...

  2. The applicability of non-local LCI data for LCA

    SciTech Connect (OSTI)

    Osses de Eicker, Margarita; Hischier, Roland; Lehmann, Martin; Zah, Rainer; Hurni, Hans

    2010-04-15

    This study evaluated how applicable European Life Cycle Inventory (LCI) data are to assessing the environmental impacts of the life cycle of Brazilian triple superphosphate (TSP). The LCI data used for the comparison were local Brazilian LCI data, European LCI data in its original version from the ecoinvent database and a modified version of the European LCI data, which had been adapted to better account for the Brazilian situation. We compared the three established datasets at the level of the inventory as well as for their environmental impacts, i.e. at the level of Life Cycle Environmental Assessment (LCIA). The analysis showed that the European LCIs (both the original and the modified ones) considered a broader spectrum of background processes and environmental flows (inputs and outputs). Nevertheless, TSP production had in all three cases similar values for the consumption of the main raw materials. The LCIA results obtained for the datasets showed important differences as well. Therefore we concluded that the European data in general lead to much higher environmental impacts than the Brazilian data. The differences between the LCIA results obtained with the Brazilian and the European data can be basically explained by the methodological differences underlying the data. The small differences at the LCI level for selected inputs and outputs between the Brazilian and the European LCIs from ecoinvent indicate that the latter can be regarded as applicable for characterizing the Brazilian TSP.

  3. Life Cycle Inventory Database | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Commercial Buildings Past Projects Life Cycle Inventory Database Life Cycle Inventory Database The U.S. Life Cycle Inventory (LCI) Database serves as a central repository for ...

  4. Hawaii Information Package for Chemical Inventory Form (HCIF...

    Open Energy Info (EERE)

    Information Package for Chemical Inventory Form (HCIF)Tier II Jump to: navigation, search OpenEI Reference LibraryAdd to library Form: Hawaii Information Package for Chemical...

  5. USGS-Land Cover Institute (LCI) | Open Energy Information

    Open Energy Info (EERE)

    USGS currently houses the institute at the Center for Earth Resources Observation and Science (EROS) in Sioux Falls, South Dakota. The LCI will address land cover topics from...

  6. NREL-LCI Database Project | Open Energy Information

    Open Energy Info (EERE)

    and compare analysis results that are based on similar data collection and analysis methods. NREL-LCI Database Project Screenshot This article is a stub. You can help OpenEI by...

  7. Life Cycle Inventory of Biodiesel and Petroleum Diesel for Use in an Urban Bus

    SciTech Connect (OSTI)

    Sheehan, John; Camobreco, Vince; Duffield, James; Graboski, Michael; Graboski, Michael; Shapouri, Housein

    1998-05-01

    This report presents the findings from a study of the life cycle inventories (LCIs) for petroleum diesel and biodiesel. An LCI is a comprehensive quantification of all the energy and environmental flows associated with a product from “cradle to grave.” It provides information on raw materials extracted from the environment; energy resources consumed; air, water, and solid waste emissions generated.

  8. NREL: U.S. Life Cycle Inventory Database Home Page

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    U.S. Life-Cycle Inventory Database Buildings Research Photo of a green field with an ocean in the background. U.S. Life Cycle Inventory Database NREL and its partners created the U.S. Life Cycle Inventory (LCI) Database to help life cycle assessment (LCA) practitioners answer questions about environmental impact. This database provides individual gate-to-gate, cradle-to-gate and cradle-to-grave accounting of the energy and material flows into and out of the environment that are associated with

  9. Forms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Access Procedures for New Users Deposition Request Form Exit Form Flycutting Request Form Hot Embossing Request Form Metrology Request Form Microfabrication Project Proposal Form...

  10. Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    132014 10:58 AM Submitted by Anonymous User This message was created by a Microsoft InfoPath form. The form data may be included as an attachment. Freedom of Information Act...

  11. Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    9:27 PM Submitted by Anonymous User This message was created by a Microsoft InfoPath form. The form data may be included as an attachment. Freedom of Information Act (FOIA)...

  12. Forms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Forms and Checklists Download or view forms and checklists used at WNR. IWD Forms 2100 - Integrated Work Document (IWD) Part 1, Activity Specific Information (word version) 2100_con - Integrated Work Document (IWD) Part 1, Activity Specific Information Continuation Page (word version) 2101 - Integrated Work Document (IWD) Part 2, FOD Requirements and Approval for Entry and Area Hazards and Controls, Non-Tenant Activity Form (word version) 2102 - Integrated Work Document (IWD) Part 2, FOD

  13. Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the Privacy Act must be signed and, therefore, cannot be submitted : on this form. t Name Richard van Dijk Email , Orga nizati on Mailin g Addre ss city PA State I P Pion e Ex....

  14. PHYSICAL INVENTORY LISTING | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PHYSICAL INVENTORY LISTING PHYSICAL INVENTORY LISTING Form supports nuclear materials control and accountability. PHYSICAL INVENTORY LISTING (15.97 KB) More Documents & Publications DOE/NRC F 742C o:\informs\fixforms\nrc740m.wpf DOE F 74

  15. Osilodrostat (LCI699), a potent 11β-hydroxylase inhibitor, administered in combination with the multireceptor-targeted somatostatin analog pasireotide: A 13-week study in rats

    SciTech Connect (OSTI)

    Li, Li; Vashisht, Kapil; Boisclair, Julie; Li, Wenkui; Lin, Tsu-han; Schmid, Herbert A.; Kluwe, William; Schoenfeld, Heidi; Hoffmann, Peter

    2015-08-01

    The somatostatin analog pasireotide and the 11β-hydroxylase inhibitor osilodrostat (LCI699) reduce cortisol levels by distinct mechanisms of action. There exists a scientific rationale to investigate the clinical efficacy of these two agents in combination. This manuscript reports the results of a toxicology study in rats, evaluating different doses of osilodrostat and pasireotide alone and in combination. Sixty male and 60 female rats were randomized into single-sex groups to receive daily doses of pasireotide (0.3 mg/kg/day, subcutaneously), osilodrostat (20 mg/kg/day, orally), osilodrostat/pasireotide in combination (low dose, 1.5/0.03 mg/kg/day; mid-dose, 5/0.1 mg/kg/day; or high dose, 20/0.3 mg/kg/day), or vehicle for 13 weeks. Mean body-weight gains from baseline to Week 13 were significantly lower in the pasireotide-alone and combined-treatment groups compared to controls, and were significantly higher in female rats receiving osilodrostat monotherapy. Osilodrostat and pasireotide monotherapies were associated with significant changes in the histology and mean weights of the pituitary and adrenal glands, liver, and ovary/oviduct. Osilodrostat alone was associated with adrenocortical hypertrophy and hepatocellular hypertrophy. In combination, osilodrostat/pasireotide did not exacerbate any target organ changes and ameliorated the liver and adrenal gland changes observed with monotherapy. C{sub max} and AUC{sub 0–24h} of osilodrostat and pasireotide increased in an approximately dose-proportional manner. In conclusion, the pasireotide and osilodrostat combination did not exacerbate changes in target organ weight or toxicity compared with either monotherapy, and had an acceptable safety profile; addition of pasireotide to the osilodrostat regimen may attenuate potential adrenal gland hyperactivation and hepatocellular hypertrophy, which are potential side effects of osilodrostat monotherapy. - Highlights: • We examined the target organ toxicity of SOM230

  16. FAIR Act Inventory- FY13

    Broader source: Energy.gov [DOE]

    Federal Activities Inventory Reform (FAIR) Act - INHERENTLY GOVERNMENTAL AND COMMERCIAL ACTIVITIES (IGCA) INVENTORY

  17. Personal Computer Inventory System

    Energy Science and Technology Software Center (OSTI)

    1993-10-04

    PCIS is a database software system that is used to maintain a personal computer hardware and software inventory, track transfers of hardware and software, and provide reports.

  18. CONDUCTING A RECORDS INVENTORY

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    deficiencies, or problems with the recordkeeping. ... In planning your inventory scope, keep in mind that: a. ... legal, administrative, emergency operating, and rights and ...

  19. High-Level Waste Inventory

    Office of Environmental Management (EM)

    Analysis of Alternatives for Disposition of the Idaho Calcined High-Level Waste Inventory ... of the Idaho Calcined High-Level Waste Inventory Volume 1- Summary Report April ...

  20. Initial Radionuclide Inventories

    SciTech Connect (OSTI)

    H. Miller

    2004-09-19

    The purpose of this analysis is to provide an initial radionuclide inventory (in grams per waste package) and associated uncertainty distributions for use in the Total System Performance Assessment for the License Application (TSPA-LA) in support of the license application for the repository at Yucca Mountain, Nevada. This document is intended for use in postclosure analysis only. Bounding waste stream information and data were collected that capture probable limits. For commercially generated waste, this analysis considers alternative waste stream projections to bound the characteristics of wastes likely to be encountered using arrival scenarios that potentially impact the commercial spent nuclear fuel (CSNF) waste stream. For TSPA-LA, this radionuclide inventory analysis considers U.S. Department of Energy (DOE) high-level radioactive waste (DHLW) glass and two types of spent nuclear fuel (SNF): CSNF and DOE-owned (DSNF). These wastes are placed in two groups of waste packages: the CSNF waste package and the codisposal waste package (CDSP), which are designated to contain DHLW glass and DSNF, or DHLW glass only. The radionuclide inventory for naval SNF is provided separately in the classified ''Naval Nuclear Propulsion Program Technical Support Document'' for the License Application. As noted previously, the radionuclide inventory data presented here is intended only for TSPA-LA postclosure calculations. It is not applicable to preclosure safety calculations. Safe storage, transportation, and ultimate disposal of these wastes require safety analyses to support the design and licensing of repository equipment and facilities. These analyses will require radionuclide inventories to represent the radioactive source term that must be accommodated during handling, storage and disposition of these wastes. This analysis uses the best available information to identify the radionuclide inventory that is expected at the last year of last emplacement, currently identified as

  1. Initial Radionuclide Inventories

    SciTech Connect (OSTI)

    Miller, H

    2005-07-12

    The purpose of this analysis is to provide an initial radionuclide inventory (in grams per waste package) and associated uncertainty distributions for use in the Total System Performance Assessment for the License Application (TSPA-LA) in support of the license application for the repository at Yucca Mountain, Nevada. This document is intended for use in postclosure analysis only. Bounding waste stream information and data were collected that capture probable limits. For commercially generated waste, this analysis considers alternative waste stream projections to bound the characteristics of wastes likely to be encountered using arrival scenarios that potentially impact the commercial spent nuclear fuel (CSNF) waste stream. For TSPA-LA, this radionuclide inventory analysis considers U.S. Department of Energy (DOE) high-level radioactive waste (DHLW) glass and two types of spent nuclear fuel (SNF): CSNF and DOE-owned (DSNF). These wastes are placed in two groups of waste packages: the CSNF waste package and the codisposal waste package (CDSP), which are designated to contain DHLW glass and DSNF, or DHLW glass only. The radionuclide inventory for naval SNF is provided separately in the classified ''Naval Nuclear Propulsion Program Technical Support Document'' for the License Application. As noted previously, the radionuclide inventory data presented here is intended only for TSPA-LA postclosure calculations. It is not applicable to preclosure safety calculations. Safe storage, transportation, and ultimate disposal of these wastes require safety analyses to support the design and licensing of repository equipment and facilities. These analyses will require radionuclide inventories to represent the radioactive source term that must be accommodated during handling, storage and disposition of these wastes. This analysis uses the best available information to identify the radionuclide inventory that is expected at the last year of last emplacement, currently identified as

  2. Web Content Analysis and Inventories: Template and FY 2014 Inventory...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Content Analysis and Inventories: Template and FY 2014 Inventory Web Content Analysis and ... It also includes a notes field, which can be used for a Web content analysis. Content ...

  3. RADIOISOTOPE INVENTORY FOR TSPA-SR

    SciTech Connect (OSTI)

    C. Leigh; R. Rechard

    2001-01-30

    The total system performance assessment for site recommendation (TSPA-SR), on Yucca Mountain, as a site (if suitable) for disposal of radioactive waste, consists of several models. The Waste Form Degradation Model (i.e, source term) of the TSPA-SR, in turn, consists of several components. The Inventory Component, discussed here, defines the inventory of 26 radioisotopes for three representative waste categories: (1) commercial spent nuclear fuel (CSNF), (2) US Department of Energy (DOE) spent nuclear fuel (DSNF), and (3) high-level waste (HLW). These three categories are contained and disposed of in two types of waste packages (WPs)--CSNF WPs and co-disposal WPs, with the latter containing both DSNF and HLW. Three topics are summarized in this paper: first, the transport of radioisotopes evaluated in the past; second, the development of the inventory for the two WP types; and third, the selection of the most important radioisotopes to track in TSPA-SR.

  4. Excess Uranium Inventory Management Plan

    Office of Energy Efficiency and Renewable Energy (EERE)

    The 2013 Excess Uranium Inventory Management Plan describes a framework for the effective management of the Energy Department’s surplus uranium inventory in support of meeting its critical...

  5. STEM Education Program Inventory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Issue for STEM Education Program Inventory Title of Program* Requestor Contact Information First Name* Last Name* Phone Number* E-mail* Fax Number Institution Name Program Description* Issue Information Leading Organization* Location of Program / Event Program Address Program Website To select multiple options, press CTRL and click. Type of Program (if Other, enter information in the box to the right.)* Workforce Development Student Programs Public Engagement in Life Long Learning

  6. FY 2015 Service Contract Inventory

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy FY 2015 Service Contract Inventory Analysis Plan Department of Energy Office of Acquisition Management Strategic Programs Division (MA-622) January 2016 Department of Energy FY 2015 Service Contract Inventory Plan for Analysis The Department of Energy (DOE) approach will be performed in accordance with the criteria set out in Consolidated Appropriations Act, 2010, (Pub. L. No. 111-117, § 743 (2009)), Appendix D of the November 5, 2010 OMB Memorandum on Service Contract Inventories,,

  7. FY 2013 Service Contract Inventory ...

    Broader source: Energy.gov (indexed) [DOE]

    ... Officers and Senior Procurement Executives, dated November 5, 2010 and December 19, 2011, available at http:www.whitehouse.govombprocurement-service-contract-inventories. ...

  8. FY 2014 Service Contract Inventory ...

    Broader source: Energy.gov (indexed) [DOE]

    ... Officers and Senior Procurement Executives, dated November 5, 2010 and December 19, 2011, available at http:www.whitehouse.govombprocurement-service-contract-inventories. ...

  9. course inventory | Critical Materials Institute

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Read more about CMI Education Partner: Colorado School of Mines CMI Course Inventory: Mineral Economics and Business Mineral Economics and Business Of the six CMI Team members that ...

  10. Spent Fuel Working Group report on inventory and storage of the Department`s spent nuclear fuel and other reactor irradiated nuclear materials and their environmental, safety and health vulnerabilities. Volume 2, Working Group Assessment Team reports; Vulnerability development forms; Working group documents

    SciTech Connect (OSTI)

    Not Available

    1993-11-01

    The Secretary of Energy`s memorandum of August 19, 1993, established an initiative for a Department-wide assessment of the vulnerabilities of stored spent nuclear fuel and other reactor irradiated nuclear materials. A Project Plan to accomplish this study was issued on September 20, 1993 by US Department of Energy, Office of Environment, Health and Safety (EH) which established responsibilities for personnel essential to the study. The DOE Spent Fuel Working Group, which was formed for this purpose and produced the Project Plan, will manage the assessment and produce a report for the Secretary by November 20, 1993. This report was prepared by the Working Group Assessment Team assigned to the Hanford Site facilities. Results contained in this report will be reviewed, along with similar reports from all other selected DOE storage sites, by a working group review panel which will assemble the final summary report to the Secretary on spent nuclear fuel storage inventory and vulnerability.

  11. Fair Act Inventory | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Fair Act Inventory Fair Act Inventory This page provides guidance for submission of the DOE FAIR Act Inventory, or otherwise known as the Inherently Governmental Commercial Activities (IGCA) Inventory. The FAIR Act directs Federal agencies to issue each year an inventory of all commercial activities performed by Federal employees. OMB reviews each agency's commercial activities inventory and consults with the agency regarding content. Upon the completion of this review and consultation, the

  12. California Statewide Property Inventory Website | Open Energy...

    Open Energy Info (EERE)

    Inventory Website Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: California Statewide Property Inventory Website Abstract The Statewide Property...

  13. Estimating Waste Inventory and Waste Tank Characterization |...

    Office of Environmental Management (EM)

    Estimating Waste Inventory and Waste Tank Characterization Estimating Waste Inventory and Waste Tank Characterization Summary Notes from 28 May 2008 Generic Technical Issue ...

  14. High-Level Waste Inventory

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Analysis of Alternatives for Disposition of the Idaho Calcined High-Level Waste Inventory Volume 1 - Summary Report U.S. Department of Energy Office of Environmental Management April 2016 U.S. DOE-EM Independent Analysis of Alternatives for Disposition of the Idaho Calcined High-Level Waste Inventory Volume 1- Summary Report April 2016 ii THIS PAGE INTENTIONALLY LEFT BLANK U.S. DOE-EM Independent Analysis of Alternatives for Disposition of the Idaho Calcined High-Level Waste Inventory Volume 1-

  15. Web Content Analysis and Inventories: Template and FY 2014 Inventory

    Office of Energy Efficiency and Renewable Energy (EERE)

    A content inventory and analysis will help identify content that needs to be updated, edited, added, or removed for maintenance. They're also recommended prior to starting a website redesign. This content template and sample inventory were created in Excel. The sample lists URLs, page names, navigation, navigation hierarchy, and section placement for each page on the website. It also includes a notes field, which can be used for a Web content analysis.

  16. Web Content Analysis and Inventories

    Broader source: Energy.gov [DOE]

    The Office of Energy Efficiency and Renewable Energy (EERE) recommends periodic content inventories and analyses of its websites. They will help identify content that needs to be updated, edited, added, or removed for maintenance.

  17. FY 2014 Service Contract Inventory

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Analysis Plan Department of Energy Office of Acquisition and Project Management Strategic Programs Division (MA-622) December 2014 Department of Energy FY 2014 Service Contract Inventory Plan for Analysis The Department of Energy (DOE) approach will be performed in accordance with the criteria set out in Consolidated Appropriations Act, 2010, (Pub. L. No. 111-117, § 743 (2009)), Appendix D of the November 5, 2010 OMB Memorandum on Service Contract Inventories, OMB Memorandum dated November 25,

  18. Fuel Cycle Potential Waste Inventory for Disposition Rev 5 | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Fuel Cycle Potential Waste Inventory for Disposition Rev 5 Fuel Cycle Potential Waste Inventory for Disposition Rev 5 The United States currently utilizes a once-through fuel cycle where used nuclear fuel is stored onsite in either wet pools or in dry storage systems with ultimate disposal envisioned in a deep mined geologic repository. This report provides an estimate of potential waste inventory and waste form characteristics for the DOE used nuclear fuel and high-level radioactive

  19. Clean Lead Facility (CLF) Inventory System

    Energy Science and Technology Software Center (OSTI)

    1995-07-13

    The CLF Inventory System records shipments of clean or nonradioactive contaminated lead stored at the CLF. The Inventory System provides reports and inventory information to Facility operators. Annual, quarterly, monthly, and current inventory reports may be printed. Profile reports of each shipment of lead may also be printed for verification and documentation of lead transactions.

  20. Service Forms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Service Forms Beamtime Request Form Deposition Request Form Exposure Request Form - pdf Fly Cutting Request Form Hot Embossing Request Form Metrology Request Form

  1. Cell Shipments Total Inventory, Start-of-Year

    U.S. Energy Information Administration (EIA) Indexed Site

    Cell Shipments Total Inventory, Start-of-Year 628,668 Manufactured and Purchased During Reporting Year 652,696 Imported During Reporting Year 233,377 Total Available for Shipment 1,514,740 Cells Assembled into Modules and Sold for Resale 1,129,525 Export Shipments 106,472 Total Shipments 1,235,997 Inventory, End-of-Year 278,744 Table 5. Source and disposition of photovoltaic cell shipments, 2014 (peak kilowatts) Source Disposition Source: U.S. Energy Information Administration, Form EIA-63B,

  2. Module Shipments Total Inventory, Start-of-Year

    U.S. Energy Information Administration (EIA) Indexed Site

    Module Shipments Total Inventory, Start-of-Year 906,914 Manufactured During Reporting Year 726,915 Imported During Reporting Year 5,858,676 Purchased from U.S. OEM 33,951 Total Available for Shipment 7,526,456 U.S. Shipments and Sales for Resale 6,054,538 Export Shipments 182,985 Total Shipments 6,237,524 Inventory, End-of-Year 1,288,933 Table 6. Source and disposition of photovoltaic module shipments, 2014 (peak kilowatts) Source Disposition Source: U.S. Energy Information Administration, Form

  3. Excess Uranium Inventory Management Plan | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Excess Uranium Inventory Management Plan Excess Uranium Inventory Management Plan The 2013 Excess Uranium Inventory Management Plan describes a framework for the effective...

  4. E-IDR (Inventory Disclosure Record) PIA, Idaho National Laboratory...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    E-IDR (Inventory Disclosure Record) PIA, Idaho National Laboratory E-IDR (Inventory Disclosure Record) PIA, Idaho National Laboratory E-IDR (Inventory Disclosure Record) PIA, Idaho ...

  5. U.S. Life Cycle Inventory Database Roadmap (Brochure) | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Life Cycle Inventory Database Roadmap (Brochure) U.S. Life Cycle Inventory Database Roadmap (Brochure) Life cycle inventory data are the primary inputs for conducting life cycle ...

  6. Stable isotope research pool inventory

    SciTech Connect (OSTI)

    Not Available

    1980-12-01

    This report contains a listing of electromagnetically separated stable isotopes which are available for distribution within the United States for non-destructive research use from the Oak Ridge National Laboratory on a loan basis. This inventory includes all samples of stable isotopes in the Materials Research Collection and does not designate whether a sample is out on loan or in reprocessing.

  7. RFID Technology for Inventory Management

    ScienceCinema (OSTI)

    None

    2012-12-31

    The Pacific Northwest National Laboratory is leveraging the use and application of radio frequency identification (RFID) technology to a variety of markets. Tagging and tracking of individual items for inventory control is revealing rich rewards through increased time efficiency and reduced human intervention.

  8. FY 2013 Service Contract Inventory Analysis

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3 Service Contract Inventory Analysis Department of Energy Office of Acquisition and Project Management Strategic Programs Division (MA-622) December 2014 FY 2013 Service Contract Inventory Analysis Department of Energy Contents Page Section 1: Scope 2 Section 2: Methodology 4 Section 3: Findings 6 Section 4: Actions Taken or Planned 7 FY 2013 Service Contract Inventory Analysis Department of Energy 2 Section 1: Scope Service Contract Inventories Section 743 of Division C of the FY 2010

  9. Natural gas inventories at record levels

    U.S. Energy Information Administration (EIA) Indexed Site

    Natural gas inventories at record levels U.S. natural gas inventories at the end of October tied the all-time record high and inventories could climb to 4 trillion cubic feet in November for the first time. In its new monthly forecast, the U.S. Energy Information Administration said weekly injections of natural gas into storage may continue into November, after inventories at the close of October matched the record high of just over 3.9 trillion cubic feet. High inventories, along with rising

  10. Stable isotope research pool inventory

    SciTech Connect (OSTI)

    Not Available

    1988-02-01

    This report contains a listing of electromagnetically separated stable isotopes which are available at the Oak Ridge National Laboratory for distribution for nondestructive research use on a loan basis. This inventory includes all samples of stable isotopes in the Research Materials Collection and does not designate whether a sample is out on loan or is in reprocessing. For some of the high-abundance, naturally occurring isotopes, larger amounts can be made available; for example, Ca-40 and Fe-56.

  11. Stable isotope research pool inventory

    SciTech Connect (OSTI)

    Not Available

    1982-01-01

    This report contains a listing of electromagnetically separated stable isotopes which are available for distribution within the United States for nondestructive research use from the Oak Ridge National Laboratory on a loan basis. This inventory includes all samples of stable isotopes in the Material Research Collection and does not designate whether a sample is out on loan or in reprocessing. For some of the high abundance naturally occurring isotopes, larger amounts can be made available; for example, Ca-40 and Fe-56.

  12. Stable isotope research pool inventory

    SciTech Connect (OSTI)

    Not Available

    1984-03-01

    This report contains a listing of electromagnetically separated stable isotopes which are available at the Oak Ridge National Laboratory for distribution for nondestructive research use on a loan basis. This inventory includes all samples of stable isotopes in the Research Materials Collection and does not designate whether a sample is out on loan or is in reprocessing. For some of the high abundance naturally occurring isotopes, larger amounts can be made available; for example, Ca-40 and Fe-56.

  13. JLF Forms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    jlf forms JLF Forms JLF Target Fab Request JLF Experiment Worksheet JLF-Experimental Team Registration Form JLF-LLNL Participant Registration Form JLF-External Participant Registration Form JLF-Debriefing Form

  14. Project Information Form for Usability Projects | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Project Information Form for Usability Projects Project Information Form for Usability Projects For user-centered design projects such as a survey or card sort, complete the user-centered design project information form and send it to the Web Governance Team facilitator. Project Information Form - Usability (23.69 KB) More Documents & Publications EERE's Usability and Analysis Techniques Guidebook Web Content Analysis and Inventories: Template and FY 2014 Inventory Templates and Examples -

  15. Stable isotope research pool inventory

    SciTech Connect (OSTI)

    Not Available

    1981-01-01

    This report contains a listing of electromagnetically separated stable isotopes which are available for distribution within the United States for non-destructive research use from the Oak Ridge National Laboratory on a loan basis. This inventory includes all samples of stable isotopes in the Materials Research Collection and does not designate whether a sample is out on loan or in reprocessing. For some of the high abundance naturally occurring isotopes, larger amounts can be made available; for example, Ca-40 and Fe-56.

  16. Stable isotope research pool inventory

    SciTech Connect (OSTI)

    Not Available

    1983-03-01

    This report contains a listing of electromagnetically separated stable isotopes which are available for distribution within the United States for non-destructive research use from the Oak Ridge National Laboratory on a loan basis. This inventory includes all samples of stable isotopes in the Materials Research Collection and does not designate whether a sample is out on loan or in reprocessing. For some of the high abundance naturally occurring isotopes, larger amounts can be made available; for example, Ca-40 and Fe-56.

  17. Chemical Inventory | Sample Preparation Laboratories

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Chemical Inventory Use the following dropdown menus to filter the results for chemical records. To reset the results clear the entries and click "update". Facility - Any - SSRL LCLS Building - Any - 120 131 999 Room - Any - 109 113 209 257 Storage Area Storage Category Apply Title Facility Building Room Storage Area Storage Category Available to All Qty. Size Units Responsible Person 1,3-cyclohexadiene SSRL 131 209 CI L No 1 25 milliliters (ml) Tsu-Chien Weng 1,4- dioxane SSRL 120 257

  18. FY 2014 Service Contract Inventory Analysis

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Analysis Department of Energy Office of Acquisition Management Strategic Programs Division (MA-622) January 2016 FY 2014 Service Contract Inventory Analysis Department of Energy Contents Page Section 1: Scope 1 Section 2: Methodology 3 Section 3: Findings 5 Section 4: Actions Taken or Planned 6 FY 2014 Service Contract Inventory Analysis Department of Energy 1 Section 1: Scope Service Contract Inventories Section 743 of Division C of the FY 2010 Consolidated Appropriations Act, P.L. 111-117,

  19. FY 2010 Service Contract Inventory Analysis

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    0 Service Contract Inventory Analysis Department of Energy Office of Procurement & Assistance Management Strategic Programs Division (MA-622) January 2012 (REVISED) FY2010 Service Contract Inventory Analysis Department of Energy Contents Page Section 1: Background 1 Section 2: Analysis and Findings 3 Section 3: Next Steps 5 FY2010 Service Contract Inventory Analysis Department of Energy 1 Section 1: Background Section 743 of Division C of the FY 2010 Consolidated Appropriations Act, P.L.

  20. FY 2012 Service Contract Inventory Analysis Plan

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Service Contract Inventory Analysis Plan Department of Energy Office of Acquisition and Project Management Strategic Programs Division (MA-622) December 2012 Department of Energy FY 2012 Service Contract Inventory Plan for Analysis The Department of Energy (DOE) approach will be performed in accordance with the criteria set out in Consolidated Appropriations Act, 2010, (Pub. L. No. 111-117, § 743 (2009)) and Appendix D of the November 5, 2010 OMB Memorandum on Service Contract Inventories, and

  1. National System Templates: Building Sustainable National Inventory...

    Open Energy Info (EERE)

    System Templates: Building Sustainable National Inventory Management Systems Jump to: navigation, search Tool Summary LAUNCH TOOL Name: National System Templates: Building...

  2. IPCC Inventory Guidelines LULUCF | Open Energy Information

    Open Energy Info (EERE)

    Land Focus Area: Forestry, Agriculture Topics: GHG inventory Resource Type: Guidemanual, Lessons learnedbest practices Website: www.ipcc-nggip.iges.or.jppublicgpglulucf...

  3. Inventory processes for HANDI 2000 business management system

    SciTech Connect (OSTI)

    Wilson, D.

    1998-08-24

    Inventory records are maintained in the following inventory systems: HIP, (Spare Parts), WIM, (General Supplies): Convenient Storage, Shop Stock, Essential Materials, Special Tools, ESP (Excess Inventory). Requisitions for replenishment of inventory items are initiated in the respective inventory system and then forwarded to the purchasing system.

  4. Microsoft Word - IGCA Inventory Sub Guide 031611 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    IGCA Inventory Sub Guide 031611 Microsoft Word - IGCA Inventory Sub Guide 031611 Microsoft Word - IGCA Inventory Sub Guide 031611 (264.84 KB) More Documents & Publications IGCA Inventory Sub Guide 040512 2015 Inherently Governmental and Commercial Activity (IGCA) Inventory Submission Guidance IGCA Training 2012

  5. IGCA Inventory Sub Guide 040512 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Inventory Sub Guide 040512 IGCA Inventory Sub Guide 040512 IGCA_Inventory_Sub_Guide_040512.pdf (205.09 KB) More Documents & Publications 2015 Inherently Governmental and Commercial Activity (IGCA) Inventory Submission Guidance Microsoft Word - IGCA Inventory Sub Guide 031611 IGCA Training 2012

  6. Online Forms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Microfabrication | Safety Online Forms, Guidelines & Policies Questions of How to Get Started? - Click here! User Forms: Beamtime Request Form - pdf CAMD Gas Cylinder Request Form - pdf Compressed Gas Purchase Order - pdf Exposure Request Form - pdf (How To Fill the Exposure Request Form?) Format for Annual User Reports - pdf Microfabrication Project Proposal Form - pdf Synchrotron Project Proposal Form - pdf Registration & Test Application for Facility Access & Radiation Badge - pdf

  7. Stable isotope research pool inventory

    SciTech Connect (OSTI)

    Not Available

    1985-02-01

    This report contains a listing of electromagnetically separated stable isotopes which are available at the Oak Ridge National Laboratory for distribution for non-destructive research use on a loan basis. This inventory includes all samples of stable isotopes in the Research Materials Collection and does not designate whether a sample is out on loan or is in reprocessing. For some of the high abundance naturally occurring isotopes, larger amounts can be made available; for example, /sup 40/Ca and /sup 56/Fe. All request for the loan of samples should be submitted with a summary of the purpose of the loan to: Isotope Distribution Office, Oak Ridge National Laboratory, P.O. Box X, Oak Ridge, Tennessee 37831. Requests from non-DOE contractors and from foreign institutions require DOE approval.

  8. Stable isotope research pool inventory

    SciTech Connect (OSTI)

    Not Available

    1986-08-01

    This report contains a listing of electromagnetically separated stable isotopes which are available at the Oak Ridge National Laboratory for distribution for nondestructive research use on a loan basis. This inventory includes all samples of stable isotopes in the Research Materials Collection and does not designate whether a sample is out on loan or is in reprocessing. For some of the high-abundance, naturally occurring isotopes, larger amounts can be made available; for example, Ca-40 and Fe-56. All requests for the loan of samples should be submitted with a summary of the purpose of the loan to: Iotope Distribution Office, Oak Ridge National Laboratory, P.O. Box X, Oak Ridge, Tennessee 37831. Requests from non-DOE contractors and from foreign institutions require DOE approval.

  9. Inventory Data Package for Hanford Assessments

    SciTech Connect (OSTI)

    Kincaid, Charles T.; Eslinger, Paul W.; Aaberg, Rosanne L.; Miley, Terri B.; Nelson, Iral C.; Strenge, Dennis L.; Evans, John C.

    2006-06-01

    This document presents the basis for a compilation of inventory for radioactive contaminants of interest by year for all potentially impactive waste sites on the Hanford Site for which inventory data exist in records or could be reasonably estimated. This document also includes discussions of the historical, current, and reasonably foreseeable (1944 to 2070) future radioactive waste and waste sites; the inventories of radionuclides that may have a potential for environmental impacts; a description of the method(s) for estimating inventories where records are inadequate; a description of the screening method(s) used to select those sites and contaminants that might make a substantial contribution to impacts; a listing of the remedial actions and their completion dates for waste sites; and tables showing the best estimate inventories available for Hanford assessments.

  10. An inventory of wells of Oak Ridge National Laboratory 1992

    SciTech Connect (OSTI)

    Rush, R.M.; Gryder, R.K.; Baxter, F.P.

    1993-02-01

    The well inventory described in this report is a database of well information being developed for the Oak Ridge National Laboratory (ORNL) Groundwater Coordinator and the ORNL Groundwater Protection Program. Data are presented on 2071 ORNL wells as maps and as tabular data. A table of well identification aliases is given to permit correlation with earlier reports. Information is incomplete for many of the wells, and a form is provided for readers to provide missing or updated data. The goal of the developers of this data base is to produce a comprehensive inventory of wells at ORNL. This data base is being maintained to provide current information for the operational management of the ORNL groundwater monitoring system and for various users of groundwater data at ORNL.

  11. Toxic release inventory, (TRI), 1991. Data file

    SciTech Connect (OSTI)

    1991-12-31

    Section 313 of the Emergency Planning and Community Right-to-Know Act (also known as Title III) of the Superfund Amendments and Reauthorization Act of 1986 (Public Law 99-499) requires EPA to establish a national inventory of toxic chemical emissions from certain facilities. The final Toxic Chemical Release Form R and regulations for the 1987 reporting year were published in the Federal Register on February 16, 1988 (53 FR 4500-4554). The reporting requirement applies to owners and operators of facilities that have 10 or more full-time employees, that are in Standard Industrial Classification (SIC) codes 20 through 39 (i.e., manufacturing facilities) and that manufacture (including importing), process or otherwise use a listed toxic chemical in excess of specified threshold quantities. The law mandates that the data be made publicly available through a computer database. The online TRI file should appeal to a broad-based user audience including industry, state and local environmental agencies, emergency planning committees, the Federal Government and other regulatory groups.

  12. 2015 Inherently Governmental and Commercial Activity (IGCA) Inventory...

    Energy Savers [EERE]

    Inherently Governmental and Commercial Activity (IGCA) Inventory Submission Guidance 2015 ... Office of Management and Budget's (OMB) 2015 inventory guidance yet, but anticipates ...

  13. Tunisia-Capacity Development for GHG inventories and MRV | Open...

    Open Energy Info (EERE)

    Tunisia-Capacity Development for GHG inventories and MRV Jump to: navigation, search Name Capacity Development for GHG inventories and MRV in Tunisia AgencyCompany Organization...

  14. Tunisia-Capacity Development for GHG inventories and MRV | Open...

    Open Energy Info (EERE)

    Development for GHG inventories and MRV in Tunisia) Jump to: navigation, search Name Capacity Development for GHG inventories and MRV in Tunisia AgencyCompany Organization...

  15. EPA-GHG Inventory Capacity Building | Open Energy Information

    Open Energy Info (EERE)

    EPA-GHG Inventory Capacity Building Jump to: navigation, search Tool Summary Name: US EPA GHG inventory Capacity Building AgencyCompany Organization: United States Environmental...

  16. Moldova National Inventory Report - Lessons Learned | Open Energy...

    Open Energy Info (EERE)

    Moldova National Inventory Report - Lessons Learned Jump to: navigation, search Name Moldova Second National Inventory Report - Lessons Learned AgencyCompany Organization United...

  17. Building Trust in GHG Inventories from the United States and...

    Open Energy Info (EERE)

    Trust in GHG Inventories from the United States and China Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Counting the Gigatones: Building Trust in GHG Inventories from...

  18. IPCC Guidelines for National Greenhouse Gas Inventories | Open...

    Open Energy Info (EERE)

    Guidelines for National Greenhouse Gas Inventories Jump to: navigation, search Tool Summary Name: IPCC Guidelines for National Greenhouse Gas Inventories AgencyCompany...

  19. Managing the National Greenhouse Gas Inventory Process | Open...

    Open Energy Info (EERE)

    Managing the National Greenhouse Gas Inventory Process Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Managing the National Greenhouse Gas Inventory Process Agency...

  20. UNFCCC-GHG Inventory Review Training Program | Open Energy Information

    Open Energy Info (EERE)

    UNFCCC-GHG Inventory Review Training Program (Redirected from UNFCCC GHG Inventory Review Training Program) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: UNFCCC GHG...

  1. UNFCCC-GHG Inventory Review Training Program | Open Energy Information

    Open Energy Info (EERE)

    Logo: UNFCCC GHG inventory Review Training Program The Basic Course of the updated training programme covers technical aspects of the review of GHG inventories under the...

  2. Managing inventory costs through joint procurement programs

    SciTech Connect (OSTI)

    Harlan, T.E. ); Williams, M.C. )

    1992-01-01

    Given current economic and regulatory challenges, utilities are facing the need to manage inventories more efficiently, lower spare parts costs, and reduce the downtime associated with equipment failure. Two programs helping utilities achieve these goals are the Joint Procurement Corporation (JPC) for multicompany purchase of common equipment and services and the pooled inventory management (PIM) program for joint purchase and storage of nuclear generating unit spare parts. Both of these are cooperative programs that decrease the probability of extended plant outages and reduce duplication of effort and/or inventory among participating utilities.

  3. Inventory of state energy models

    SciTech Connect (OSTI)

    Melcher, A.G.; Gist, R.L.; Underwood, R.G.; Weber, J.C.

    1980-03-31

    These models address a variety of purposes, such as supply or demand of energy or of certain types of energy, emergency management of energy, conservation in end uses of energy, and economic factors. Fifty-one models are briefly described as to: purpose; energy system; applications;status; validation; outputs by sector, energy type, economic and physical units, geographic area, and time frame; structure and modeling techniques; submodels; working assumptions; inputs; data sources; related models; costs; references; and contacts. Discussions in the report include: project purposes and methods of research, state energy modeling in general, model types and terminology, and Federal legislation to which state modeling is relevant. Also, a state-by-state listing of modeling efforts is provided and other model inventories are identified. The report includes a brief encylopedia of terms used in energy models. It is assumed that many readers of the report will not be experienced in the technical aspects of modeling. The project was accomplished by telephone conversations and document review by a team from the Colorado School of Mines Research Institute and the faculty of the Colorado School of Mines. A Technical Committee (listed in the report) provided advice during the course of the project.

  4. National Coal Quality Inventory (NACQI)

    SciTech Connect (OSTI)

    Robert Finkelman

    2005-09-30

    The U.S. Geological Survey (USGS) conducted the National Coal Quality Inventory (NaCQI) between 1999 and 2005 to address a need for quality information on coals that will be mined during the next 20-30 years. Collaboration between the USGS, State geological surveys, universities, coal burning utilities, and the coal mining industry plus funding support from the Electric Power Research Institute (EPRI) and the U.S. Department of Energy (DOE) permitted collection and submittal of coal samples for analysis. The chemical data (proximate and ultimate analyses; major, minor and trace element concentrations) for 729 samples of raw or prepared coal, coal associated shale, and coal combustion products (fly ash, hopper ash, bottom ash and gypsum) from nine coal producing States are included. In addition, the project identified a new coal reference analytical standard, to be designated CWE-1 (West Elk Mine, Gunnison County, Colorado) that is a high-volatile-B or high-volatile-A bituminous coal with low contents of ash yield and sulfur, and very low, but detectable contents of chlorine, mercury and other trace elements.

  5. Optimizing spare parts inventories using RAM techniques

    SciTech Connect (OSTI)

    Purser, F.E.; Farmer, F.G. )

    1990-01-01

    The perfect spare parts inventory is one which always has the component required to prevent a facility outage. Ideally, such an inventory would contain exactly enough of each component to maintain the facility in operating condition until replacements for the spare parts arrive. Real spare parts inventories have typically been specified using a combination of engineering judgement and manufacturer's recommendations, as modified by budgetary constraints. The development of reliability, availability and maintainability (RAM) techniques provides additional tools through which spare parts inventories can more effectively be used to improve the safety and availability of a facility. This paper presents an analysis performed at the INEL using the techniques resident in a Reliability-Centered-Maintenance (RCM) program to prioritize components based on contribution to risk and to availability. The fill rate model or the confidence level approach could then be performed for those critical components resulting in an optimum stock level for the facility.

  6. BCM 1 Equipment Inventory | Sample Preparation Laboratories

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 Equipment Inventory Biology Chemistry & Material Science Laboratory 1 Title Equipment Type Description Corning 430 pH Meter pH Meter The Corning 430 pH meter is designed to ...

  7. BCM 2 Equipment Inventory | Sample Preparation Laboratories

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 Equipment Inventory Biology Chemistry & Material Science Laboratory 2 Title Equipment Type Description Accumet Basic AB15 pH meter pH Meter pH meters with combination AgAgCl ...

  8. Annual Transuranic Waste Inventory Report - 2013

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    0 Page 4 of 382 Table of Figures Figure 1-1. U.S. Department of Energy TRU Waste Generator Sites ... 17 Figure 2-1. TRU Waste Inventory Process Flowchart...

  9. Service Contract Inventory | Department of Energy

    Office of Environmental Management (EM)

    L. 111-117) requires executive agencies covered by the Federal Activities Inventory Reform (FAIR) Act (Pub. L. 105-270), except DoD, to submit to the Office of Management and ...

  10. COMPILATION OF REGIONAL TO GLOBAL INVENTORIES OF ANTHROPOGENIC EMISSIONS

    SciTech Connect (OSTI)

    BENKOVITZ,C.M.

    2002-11-01

    The mathematical modeling of the transport and transformation of trace species in the atmosphere is one of the scientific tools currently used to assess atmospheric chemistry, air quality, and climatic conditions. From the scientific but also from the management perspectives accurate inventories of emissions of the trace species at the appropriate spatial, temporal, and species resolution are required. There are two general methodologies used to estimate regional to global emissions: bottom-up and top-down (also known as inverse modeling). Bottom-up methodologies to estimate industrial emissions are based on activity data, emission factors (amount of emissions per unit activity), and for some inventories additional parameters (such as sulfur content of fuels). Generally these emissions estimates must be given finer sectoral, spatial (usually gridded), temporal, and for some inventories species resolution. Temporal and spatial resolution are obtained via the use of surrogate information, such as population, land use, traffic counts, etc. which already exists in or can directly be converted to gridded form. Speciation factors have been and are being developed to speciate inventories of NO{sub x}, particulate matter, and hydrocarbons. Top-down (inverse modeling) methodologies directly invert air quality measurements in terms of poorly known but critical parameters to constrain the emissions needed to explain these measurements; values of these parameters are usually computed using atmospheric transport models. Currently there are several strong limitations of inverse modeling, but the continued evolution of top-down estimates will be facilitated by the development of denser monitoring networks and by the massive amounts of data from satellite observations.

  11. Reduction of worldwide plutonium inventories using conventional reactors and advanced fuels: A systems study

    SciTech Connect (OSTI)

    Krakowski, R.A.; Bathke, C.G.; Chodak, P. III

    1997-09-01

    The potential for reducing plutonium inventories in the civilian nuclear fuel cycle through recycle in LWRs of a variety of mixed-oxide forms is examined by means of a cost-based plutonium-flow systems model that includes an approximate measure of proliferation risk. The impact of plutonium recycle in a number of forms is examined, including the introduction of nonfertile fuels into conventional (LWR) reactors to reduce net plutonium generation, to increase plutonium burnup, and to reduce exo-reactor plutonium inventories.

  12. FY 2011 Service Contract Inventory Analysis Plan

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1 Service Contract Inventory Analysis Plan Department of Energy Office of Procurement & Assistance Management Strategic Programs Division (MA-622) December 2011 Department of Energy FY 2011 Service Contract Inventory Plan for Analysis The Department of Energy (DOE) approach will be performed in accordance with the criteria set out in Consolidated Appropriations Act, 2010, (Pub. L. No. 111-117, § 743 (2009)) and Appendix D of the November 5, 2010 OMB Memorandum on Service Contract

  13. State Energy Efficiency Program Evaluation Inventory

    U.S. Energy Information Administration (EIA) Indexed Site

    State Energy Efficiency Program Evaluation Inventory July 2013 Independent Statistics & Analysis www.eia.gov U.S. Department of Energy Washington, DC 20585 U.S. Energy Information Administration | State Energy Efficiency Program Evaluation Inventory i This report was prepared by the U.S. Energy Information Administration (EIA), the statistical and analytical agency within the U.S. Department of Energy. By law, EIA's data, analyses, and forecasts are independent of approval by any other

  14. Technical Basis for PNNL Beryllium Inventory

    SciTech Connect (OSTI)

    Johnson, Michelle Lynn

    2014-07-09

    The Department of Energy (DOE) issued Title 10 of the Code of Federal Regulations Part 850, “Chronic Beryllium Disease Prevention Program” (the Beryllium Rule) in 1999 and required full compliance by no later than January 7, 2002. The Beryllium Rule requires the development of a baseline beryllium inventory of the locations of beryllium operations and other locations of potential beryllium contamination at DOE facilities. The baseline beryllium inventory is also required to identify workers exposed or potentially exposed to beryllium at those locations. Prior to DOE issuing 10 CFR 850, Pacific Northwest Nuclear Laboratory (PNNL) had documented the beryllium characterization and worker exposure potential for multiple facilities in compliance with DOE’s 1997 Notice 440.1, “Interim Chronic Beryllium Disease.” After DOE’s issuance of 10 CFR 850, PNNL developed an implementation plan to be compliant by 2002. In 2014, an internal self-assessment (ITS #E-00748) of PNNL’s Chronic Beryllium Disease Prevention Program (CBDPP) identified several deficiencies. One deficiency is that the technical basis for establishing the baseline beryllium inventory when the Beryllium Rule was implemented was either not documented or not retrievable. In addition, the beryllium inventory itself had not been adequately documented and maintained since PNNL established its own CBDPP, separate from Hanford Site’s program. This document reconstructs PNNL’s baseline beryllium inventory as it would have existed when it achieved compliance with the Beryllium Rule in 2001 and provides the technical basis for the baseline beryllium inventory.

  15. Inventory optimization in the US petroleum industry: empirical analysis and implications for energy emergency policy

    SciTech Connect (OSTI)

    Hubbard, R.G.; Weiner, R.

    1983-08-01

    This paper starts from the observation that the rapid increases in the price of crude oil during two of the last three supply disruptions can be attributed in part to increased private inventory demand stimulated by expectations of still higher prices (and hence speculative profits) in the future. To examine this phenomenon, we develop an optimizing model of inventory behavior in the petroleum industry and test it on United States data. Government intervention in any future disruption is likely to take the form of releases from the Strategic Petroleum Reserve (SPR). Given that the SPR accounts for but a small fraction of US oil inventories, the reaction of the private sector is critical in evaluating its impact. We incorporate inventory behavior in a small, empirically-estimated model of the world oil market, which is then linked to a short-run macro-econometric model of the US. We employ the linked energy-economy models to simulate a disruption and the effects of using the SPR on oil prices and private inventory behavior. Our simulations support the view that substantial inventory accumulation accompanies a supply disruption. In the debate over whether the SPR is potentially a potent or impotent resource in an emergency, we lean toward potency. We found that public releases were not absorbed in private stockpiles; indeed, their dampening price effects served, albeit slightly, to discourage speculative stock build. 20 references, 3 figures, 6 tables.

  16. Technetium Inventory, Distribution, and Speciation in Hanford Tanks

    SciTech Connect (OSTI)

    Serne, R. Jeffrey; Rapko, Brian M.

    2014-05-02

    The purpose of this report is three fold: 1) assemble the available information regarding technetium (Tc) inventory, distribution between phases, and speciation in Hanford’s 177 storage tanks into a single, detailed, comprehensive assessment; 2) discuss the fate (distribution/speciation) of Tc once retrieved from the storage tanks and processed into a final waste form; and 3) discuss/document in less detail the available data on the inventory of Tc in other "pools" such as the vadose zone below inactive cribs and trenches, below single-shell tanks (SSTs) that have leaked, and in the groundwater below the Hanford Site. A thorough understanding of the inventory for mobile contaminants is key to any performance or risk assessment for Hanford Site facilities because potential groundwater and river contamination levels are proportional to the amount of contaminants disposed at the Hanford Site. Because the majority of the total 99Tc produced at Hanford (~32,600 Ci) is currently stored in Hanford’s 177 tanks (~26,500 Ci), there is a critical need for knowledge of the fate of this 99Tc as it is removed from the tanks and processed into a final solid waste form. Current flow sheets for the Hanford Waste Treatment and Immobilization Plant process show most of the 99Tc will be immobilized as low-activity waste glass that will remain on the Hanford Site and disposed at the Integrated Disposal Facility (IDF); only a small fraction will be shipped to a geologic repository with the immobilized high-level waste. Past performance assessment studies, which focused on groundwater protection, have shown that 99Tc would be the primary dose contributor to the IDF performance.

  17. ARM - Forms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Send Forms To assist researchers in the conduct of field campaigns or required administrative procedures (such as Baseline Change Requests), we provide a number of...

  18. Object-oriented inventory classes: Comparison of implementations in KEE and CLOS (Common Lisp Object System)

    SciTech Connect (OSTI)

    Silbar, R.R.

    1990-01-01

    The modeling of manufacturing processes can be cast in a form which relies heavily on stores to and draws from object-oriented inventories, which contain the functionalities imposed on them by the other objects (including other inventories) in the model. These concepts have been implemented, but with some difficulties, for the particular case of pyrochemical operations at the DOE's Rocky Flats Plant using KEE, a frame-oriented expert system shell. An alternative implementation approach using CLOS (the emerging Common Lisp Object System) has been explored and found to give significant simplifications. 8 refs., 1 fig.

  19. Form Approved

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    OGE Form 450, 5 CFR Part 2634, Subpart I U.S. Office of Government Ethics (January 2007) (Replaces September 2002 edition) Form Approved OMB NO. 3209-0006 CONFIDENTIAL FINANCIAL DISCLOSURE REPORT Executive Branch Why Must I File? The duties and responsibilities of your position require you to file the Confidential Financial Disclosure Report to avoid involvement in a real or apparent conflict of interest. The purpose of this report is to assist employees and their agencies in avoiding conflicts

  20. INEEL Greenhouse Gas Inventory and Trend Analysis

    SciTech Connect (OSTI)

    Shropshire, David Earl; Teel, Dale Milton

    2000-02-01

    The objective of the INEEL GHG Inventory and Trend Analysis is to establish INEEL expertise in carbon management decision making and policy analysis. This FY-99 effort is the first step toward placing the INEEL in a leadership role within the DOE laboratories to support carbon management systems and analysis.

  1. Reduction of Worldwide Plutonium Inventories Using Conventional Reactors and Advanced Fuels: A Systems Study

    SciTech Connect (OSTI)

    Krakowski, R.A., Bathke, C.G.

    1997-12-31

    The potential for reducing plutonium inventories in the civilian nuclear fuel cycle through recycle in LWRs of a variety of mixed oxide forms is examined by means of a cost based plutonium flow systems model. This model emphasizes: (1) the minimization of separated plutonium; (2) the long term reduction of spent fuel plutonium; (3) the optimum utilization of uranium resources; and (4) the reduction of (relative) proliferation risks. This parametric systems study utilizes a globally aggregated, long term (approx. 100 years) nuclear energy model that interprets scenario consequences in terms of material inventories, energy costs, and relative proliferation risks associated with the civilian fuel cycle. The impact of introducing nonfertile fuels (NFF,e.g., plutonium oxide in an oxide matrix that contains no uranium) into conventional (LWR) reactors to reduce net plutonium generation, to increase plutonium burnup, and to reduce exo- reactor plutonium inventories also is examined.

  2. World oil inventories forecast to grow significantly in 2016...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    World oil inventories forecast to grow significantly in 2016 and 2017 Global oil inventories are expected to continue strong growth over the next two years which should keep oil ...

  3. FAIR Act Inventory - FY12 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2 FAIR Act Inventory - FY12 DOE 2015 FAIR (240.94 KB) More Documents & Publications FAIR Act Inventory - FY13 Memorandum Summarizing Ex Parte Communication Detailed Monthly and Annual LNG Import Statistics (2004-2012)

  4. End of Year 2010 SNF & HLW Inventories | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    End of Year 2010 SNF & HLW Inventories End of Year 2010 SNF & HLW Inventories Map of the United States of America that shows the location of approximately 64,000 MTHM of Spent ...

  5. Technetium Inventory, Distribution, and Speciation in Hanford Tanks

    SciTech Connect (OSTI)

    Serne, R. Jeffrey; Rapko, Brian M.; Pegg, Ian L.

    2014-11-13

    The purpose of this report is three fold: 1) assemble the available information regarding Tc inventory, distribution between phases, and speciation in Hanford’s 177 storage tanks into a single, detailed, comprehensive assessment; 2) discuss the fate (distribution/speciation) of Tc once retrieved from the storage tanks and processed into final waste forms; and 3) discuss/document in less detail the available data on the inventory of Tc in other “pools” such as the vadose zone below inactive cribs and trenches, below single-shell tanks (SSTs) that have leaked, and in the groundwater below the Hanford Site. This report was revised in September 2014 to add detail and correct inaccuracies in Section 5.0 on the fate of technetium (Tc) recycle from the off-gas systems downstream of the low-activity waste (LAW) melters back to the melters, based on several reports that were not found in the original literature search on the topic. The newly provided reports, from experts active in the Hanford Tank Waste Treatment and Immobilization Plant (WTP) glass studies, the Vitreous State Laboratory at The Catholic University of America (VSL) melter and off-gas system demonstrations and overall WTP systems analysis, were not originally found on electronic databases commonly searched. The major revisions to Section 5.0 also required changes to Section 7.0 (Summary and Conclusions) and this executive summary.

  6. Excess Uranium Inventory Management Plan 2008 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Plan 2008 Excess Uranium Inventory Management Plan 2008 On March 11, 2008, Secretary of Energy Samuel W. Bodman signed a policy statement1 on the management of the U.S. Department of Energy's (DOE) excess uranium inventory (Policy Statement). This Policy Statement provides the framework within which DOE will make decisions concerning future use and disposition of this inventory. The Policy Statement commits DOE to manage those inventories in a manner that: (1) is consistent with all applicable

  7. PROCEDURE FOR CONDUCTING A RECORDS INVENTORY | Department of...

    Energy Savers [EERE]

    FOR CONDUCTING A RECORDS INVENTORY More Documents & Publications Records Management Handbook Records Management Handbook Information and Records Management Transition Guidance...

  8. E-IDR (Inventory Disclosure Record) PIA, Idaho National Laboratory |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy E-IDR (Inventory Disclosure Record) PIA, Idaho National Laboratory E-IDR (Inventory Disclosure Record) PIA, Idaho National Laboratory E-IDR (Inventory Disclosure Record) PIA, Idaho National Laboratory E-IDR (Inventory Disclosure Record) PIA, Idaho National Laboratory (251.63 KB) More Documents & Publications PIA - INL Education Programs Business Enclave Manchester Software 1099 Reporting PIA, Idaho National Laboratory Integrated Safety Management Workshop

  9. DOE Announces Policy for Managing Excess Uranium Inventory | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Policy for Managing Excess Uranium Inventory DOE Announces Policy for Managing Excess Uranium Inventory March 12, 2008 - 10:52am Addthis WASHINGTON, DC - U.S. Secretary of Energy Samuel W. Bodman today released a Policy Statement on the management of the Department of Energy's (DOE) excess uranium inventory, providing the framework within which DOE will make decisions concerning future use and disposition of its inventory. During the coming year, DOE will continue its ongoing program

  10. DOE Releases Excess Uranium Inventory Plan | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Excess Uranium Inventory Plan DOE Releases Excess Uranium Inventory Plan December 16, 2008 - 8:51am Addthis WASHINGTON, D.C. - The United States Department of Energy (DOE) today issued its Excess Uranium Inventory Management Plan (the Plan), which outlines the Department's strategy for the management and disposition of its excess uranium inventories. The Plan highlights DOE's ongoing efforts to enhance national security and promote a healthy domestic nuclear infrastructure through the efficient

  11. EPA-GHG Inventory Targeted Data Collection Strategies and Software...

    Open Energy Info (EERE)

    Protection Agency Sector: Energy, Land Topics: GHG inventory Resource Type: Dataset, Lessons learnedbest practices, Training materials, Softwaremodeling tools User...

  12. 2002 DOE Final Inherently Governmental and Commercial Activities Inventory

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    | Department of Energy 2 DOE Final Inherently Governmental and Commercial Activities Inventory 2002 DOE Final Inherently Governmental and Commercial Activities Inventory 2002 DOE Final Inherently Governmental and Commercial Activities Inventory (697.3 KB) More Documents & Publications 2003 DOE IGCA Inventory Data for web.xls� 3REV2004DOEFAIR.xls� N:\My Documents\porfin.pdf�

  13. Chapter 09 - Accounting for Inventory and Related Property

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5-4-2012 9-1 CHAPTER 9 ACCOUNTING FOR INVENTORY AND RELATED PROPERTY 1. INTRODUCTION. a. Purpose. This chapter establishes the DOE inventory and related property managerial accounting policies and general procedures defined by statutory requirements, FASAB, and other Federal guidance as required. b. Background. In the Department of Energy (DOE), the term "inventory" has been used broadly to cover inventory, materials, and other related property. In this chapter the term is used as

  14. Air Emission Inventory for the INEEL -- 1999 Emission Report

    SciTech Connect (OSTI)

    Zohner, Steven K

    2000-05-01

    This report presents the 1999 calendar year update of the Air Emission Inventory for the Idaho National Engineering and Environmental Laboratory (INEEL). The INEEL Air Emission Inventory documents sources and emissions of nonradionuclide pollutants from operations at the INEEL. The report describes the emission inventory process and all of the sources at the INEEL, and provides nonradionuclide emissions estimates for stationary sources.

  15. Sandia Explosive Inventory and Information System

    SciTech Connect (OSTI)

    Clements, D.A.

    1994-08-01

    The Explosive Inventory and Information System (EIS) is being developed and implemented by Sandia National Laboratories (SNL) to incorporate a cradle to grave structure for all explosives and explosive containing devices and assemblies at SNL from acquisition through use, storage, reapplication, transfer or disposal. The system does more than track all material inventories. It provides information on material composition, characteristics, shipping requirements; life cycle cost information, plan of use; and duration of ownership. The system also provides for following the processes of explosive development; storage review; justification for retention; Resource, Recovery and Disposition Account (RRDA); disassembly and assembly; and job description, hazard analysis and training requirements for all locations and employees involved with explosive operations. In addition, other information systems will be provided through the system such as the Department of Energy (DOE) and SNL Explosive Safety manuals, the Navy`s Department of Defense (DoD) Explosive information system, and the Lawrence Livermore National Laboratories (LLNL) Handbook of Explosives.

  16. Fuel-based motor vehicle emission inventory

    SciTech Connect (OSTI)

    Singer, B.C.; Harley, R.A.

    1996-06-01

    A fuel-based methodology for calculating motor vehicle emission inventories is presented. In the fuel-based method, emission factors are normalized to fuel consumption and expressed as grams of pollutant emitted per gallon of gasoline burned. Fleet-average emission factors are calculated from the measured on-road emissions of a large, random sample of vehicles. Using this method, a fuel-based motor vehicle CO inventory was calculated for the South Coast Air Basin in California for summer 1991. Emission factors were calculated from remote sensing measurements of more than 70,000 in-use vehicles. Results of the study are presented and a conclusion is provided. 40 refs., 4 figs., 6 tabs.

  17. Savannah River Site 1991 Road Erosion Inventory.

    SciTech Connect (OSTI)

    Jones, Cliff.

    2007-06-22

    Final Report. USDA Forest Service, Savannah River, Aiken, SC. 28 pp. Abstract - This paper explains the rationale and results of a 1991 road erosion inventory conducted by members of the USDA Forest Service – Savannah River (FS-SR) and USDA Natural Resources Conservation Service (NRCS). The inventory provided information for the Department of Energy - Savannah River (DOE-SR) to justify the need for developing an erosion and sediment control program with appropriate funding, personnel, and equipment. Federally managed since the early 1950’s, the SRS is located on 198,344 acres (80,301 hectares) in the South Carolina counties of Aiken, Barnwell, and Allendale. Located along the eastern border of the Savannah River, the SRS is located within the Upper and Lower Coastal Plains of South Carolina.

  18. Geoscience Equipment Inventory | Sample Preparation Laboratories

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Geoscience Equipment Inventory « Geoscience Laboratory Title Equipment Type Description Coy Anaerobic Chamber Inert Atmosphere Chamber Coy anaerobic chamber (Type C, model 7100-000) with auto airlock for wet and dry sample preparations, 5% H2/95% N2 mix atmosphere, and auto injection system. Fisher Scientific General Purpose Refrigerator Temperature Control Fisher Scientific General Purpose refrigerator. Fisher Scientific Isotemp Freezer Temperature Control Fisher Scientific Isotemp Freezer.

  19. Air Emission, Liquid Effluent Inventory and Reporting

    Energy Science and Technology Software Center (OSTI)

    1998-08-18

    The IES maintains an inventory of radiological air and liquid effluents released to the atmosphere. The IES utilizes the official stack numbers. Data may be entered by generators for any monitoring time period. Waste volumes released as well as their radiological constituents are tracked. The IES provides data to produce a report for NESHAPS as well as several administrative action/anomaly reports. These reports flag unusual occurences (releases) that are above normal range releases.

  20. Available for Checkout Equipment Inventory | Sample Preparation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Laboratories Available for Checkout Equipment Inventory « Equipment Resources Title Description Agate Mortar & Pestle Sets Agate mortar & pestle sets (100mm, 65 mm, & 50mm sizes). Buchi V-700 Vacuum Pump & condenser Chemically resistant vacuum pump, flow rate 1.8m^3/h, ultimate vacuum less than 10mbar. The secondary condenser (Buchi 047180) is a complete module with insulation and 500mL receiving flask. Campden Instruments Vibrating Manual Tissue Cutter HA 752 Campden

  1. Physical Inventory Listing NRC 742cu

    National Nuclear Security Administration (NNSA)

    EXAMPLE 4 *** Company Name RIS 09/30/2008 A 864 0 0 90 J 1 1 A 864 0 0 90 J 2 2 1* 1* E4 E2 E1 864 0 90 J 3 2 A 0 4 *Reporting itemized inventory Total U U-235 E1 = 0.4 0.001 E2 = 0.4 0.11 E4 = 0.4 0.39 Total: 1.2 0.501

  2. Administrative Forms/Policies

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Administrative Forms Microfab Project Proposal Form Exit Form After Hours Request Form

  3. CONSENT FORM

    Office of Legacy Management (LM)

    fly, zz--2 ~32n7 -3.27.2 / / . ' . 5" . CONSENT FORM Employees, contractor personnel, and agents of the U. S. Department of Energy are hereby given permission to enter upon the property described below in order to perform the radiation survey described in the attached letter dated . . June-11 , 1980. . . i Property Description: Staten Island Warehouse 2393 Richmond Terrace Port Richmond, New York ,Property identified as Block / j/ 0 ,i . Lot zG Name A Signature by owner(s) of property - or

  4. User access to the MAP3S source emissions inventory

    SciTech Connect (OSTI)

    Benkovitz, C M; Evans, V A

    1981-03-01

    An emissions inventory based on data obtained from the National Emissions Data System (NEDS), the Federal Power Commission (FPC), Environment Canada, and other agencies was compiled by the MAP3S Central Data Coordination at Brookhaven National Laboratory. Pertinent data was brought together, collated, and loaded into computerized data bases using SYSTEM 2000 as the data base management system. These data bases are available to interested users for interactive scanning or batch retrieval. The emissions inventory consists of two distinct sections: a point source inventory and an area source inventory. The point source inventory covers the continental US and Canada; information is kept at the individual source level. The area source inventory covers the continental US; information is kept on a county basis. Work is in progress to obtain a Canadian area source inventory based on census divisions.

  5. Plutonium inventory characterization technical evaluation report

    SciTech Connect (OSTI)

    Wittman, G.R., Westinghouse Hanford

    1996-07-10

    This is a technical report on the data, gathered to date, under WHC- SD-CP-TP-086, Rev. 1, on the integrity of the food pack cans currently being used to store plutonium or plutonium compounds at the Plutonium Finishing Plant. Workplan PFP-96-VO-009, `Inspection of Special Nuclear Material Using X-ray`, was used to gather data on material and containment conditions using real time radiography. Some of those images are included herein. A matrix found in the `Plutonium Inventory Characterization Implementation Plan` was used to categorize different plutonium items based upon the type of material being stored and the life expectancy of the containers.

  6. Plutomium inventory characterization technical evaluation report II

    SciTech Connect (OSTI)

    Wittman, G.R.

    1996-09-06

    This is a technical report on the data gathered between May 1 and August 30, 1996 under WHC-SD-CP-TP-086, Rev. 1, on the integrity of stored special nuclear material at the Plutonium Finishing Plant. Work Plan PFP-96-VO-009, `Inspection of Special Nuclear Material Using X-ray` was used to gather data on material and containment conditions using real time radiography. Some of those images are included herein. A matrix found in the `Plutonium Inventory Characterization Implementation Plan` was used to categorize different plutonium items based upon the type of material being stored and the life expectancy of the containers.

  7. Property-Related Forms | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Property-Related Forms Property-Related Forms The following property-related forms are provided in PDF fillable format. Click the link in the "Format" column to open a copy of the form or right-click to download. Number* Title/Description Format** UCN-21041 Property Management System Approval Form PDF-fil UCN-21042 Transmittal Form PDF-fil UCN-21043 Inventory of Government Property PDF-fil UCN-21044 Lost Property Form PDF-fil UCN-21069 High-Risk Property Checklist PDF-fil UCN-22325

  8. USE OF CHEMICAL INVENTORY ACCURACY MEASUREMENTS AS LEADING INDICATORS

    SciTech Connect (OSTI)

    Kuntamukkula, M.

    2011-02-10

    Chemical safety and lifecycle management (CSLM) is a process that involves managing chemicals and chemical information from the moment someone begins to order a chemical and lasts through final disposition(1). Central to CSLM is tracking data associated with chemicals which, for the purposes of this paper, is termed the chemical inventory. Examples of data that could be tracked include chemical identity, location, quantity, date procured, container type, and physical state. The reason why so much data is tracked is that the chemical inventory supports many functions. These functions include emergency management, which depends upon the data to more effectively plan for, and respond to, chemical accidents; environmental management that uses inventory information to aid in the generation of various federally-mandated and other regulatory reports; and chemical management that uses the information to increase the efficiency and safety with which chemicals are stored and utilized. All of the benefits of having an inventory are predicated upon having an inventory that is reasonably accurate. Because of the importance of ensuring one's chemical inventory is accurate, many have become concerned about measuring inventory accuracy. But beyond providing a measure of confidence in information gleaned from the inventory, does the inventory accuracy measurement provide any additional function? The answer is 'Yes'. It provides valuable information that can be used as a leading indicator to gauge the health of a chemical management system. In this paper, we will discuss: what properties make leading indicators effective, how chemical inventories can be used as a leading indicator, how chemical inventory accuracy can be measured, what levels of accuracies should realistically be expected in a healthy system, and what a subpar inventory accuracy measurement portends.

  9. 2015 Inherently Governmental and Commercial Activity (IGCA) Inventory

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Submission Guidance | Department of Energy 15 Inherently Governmental and Commercial Activity (IGCA) Inventory Submission Guidance 2015 Inherently Governmental and Commercial Activity (IGCA) Inventory Submission Guidance The Department of Energy (DOE) has not received the Office of Management and Budget's (OMB) 2015 inventory guidance yet, but anticipates that an OMB alert, which is largely a reminder document, will be issued soon. The alert is expected to say Agencies are to use FY2012

  10. Inventory of Personal Property Begins Soon | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Inventory of Personal Property Begins Soon Inventory of Personal Property Begins Soon The annual physical inventory of personal property will start June 6. It's recommended that all Jefferson Lab Property Custodians, which includes anyone who is assigned Jefferson Lab property, to be prepared to make items available for this process and to excess any items that the custodian no longer needs for business purposes. If you have items on your property list that you no longer need, you may excess

  11. FY13 Energy Department Federal Program Inventory | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    FY13 Energy Department Federal Program Inventory FY13 Energy Department Federal Program Inventory Per the Government Performance and Results Act (GPRA) Modernization Act, DOE's Federal Program Inventory (FPI) is part of a Federal-wide program list intended to facilitate coordination by making it easier to find programs that contribute to a shared goal. The FPI is also intended to improve public understanding of Federal programs operations and linkages to budget, performance, and other

  12. Greenhouse Gas Regional Inventory Protocol (GRIP) Website | Open...

    Open Energy Info (EERE)

    URI: cleanenergysolutions.orgcontentgreenhouse-gas-regional-inventory-pro Language: English Policies: Deployment Programs DeploymentPrograms: "Lead by Example" is not...

  13. CMI Education Course Inventory: Geology Engineering/Geochemistry...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Course Inventory: Geology EngineeringGeochemistry Geology EngineeringGeochemistry Of the six CMI Team members that are educational institutions, five offer courses in Geology....

  14. Development of Authorized Limits for Portsmouth Oil Inventory...

    Office of Environmental Management (EM)

    of Authorized Limits for Portsmouth Oil Inventory Disposition September 12, 2012 By ... closure M E Environmental Management PORTS Oil Disposition Problem in Late 2007 * Need to ...

  15. EPA-GHG Inventory Capacity Building | Open Energy Information

    Open Energy Info (EERE)

    Capacity Building) Jump to: navigation, search Tool Summary Name: US EPA GHG inventory Capacity Building AgencyCompany Organization: United States Environmental Protection...

  16. UNFCCC-GHG Inventory Data | Open Energy Information

    Open Energy Info (EERE)

    Data AgencyCompany Organization: United Nations Framework Convention on Climate Change Sector: Energy, Land Topics: GHG inventory, Background analysis Resource Type: Dataset...

  17. UNFCCC-GHG Inventory Methodological Documents and Training Materials...

    Open Energy Info (EERE)

    Company Organization: United Nations Framework Convention on Climate Change Sector: Energy, Land Topics: GHG inventory Resource Type: Lessons learnedbest practices, Training...

  18. Global Atmospheric Pollution Forum Air Pollutant Emission Inventory...

    Open Energy Info (EERE)

    Atmospheric Pollution Forum Air Pollutant Emission Inventory Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Global Atmospheric Pollution (GAP) Forum Air Pollutant...

  19. Emission Inventories and Projections (Book) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Title: Emission Inventories and Projections When the Executive Body to the Convention on Long-range Transboundary Air Pollution took the decision to establish the Task Force on ...

  20. Maintenance accountability, jobs, and inventory control (MAJIC) program

    SciTech Connect (OSTI)

    Adkisson, B P

    1990-01-01

    This document describes the operating procedures for the maintenance accountability, jobs, and inventory control (MAJIC) program for the Maintenance Management Department of the ORNL Instrumentation and Controls Division.

  1. CESP Tool 7.1: Financing Inventory Template

    Broader source: Energy.gov [DOE]

    CESP Tool 7.1: Financing Inventory Template from Step 7: Put Together a Financing Strategy, Guide to Community Energy Strategic Planning.

  2. Clean Energy Technologies: A Preliminary Inventory of the Potential...

    Office of Scientific and Technical Information (OSTI)

    Clean Energy Technologies: A Preliminary Inventory of the Potential for Electricity Generation Citation Details In-Document Search Title: Clean Energy Technologies: A Preliminary ...

  3. Greenhouse Gas Inventory Development in Asia | Open Energy Information

    Open Energy Info (EERE)

    Research Sector: Energy, Land Topics: GHG inventory Resource Type: Guidemanual, Lessons learnedbest practices Website: www.nies.go.jpgaiyomediakit9.WGIAI067.pdf...

  4. UNFCCC Individual Reviews of GHG Inventories | Open Energy Information

    Open Energy Info (EERE)

    search Name UNFCCC Individual Reviews of GHG Inventories AgencyCompany Organization United Nations Framework Convention on Climate Change Sector Energy, Land Topics GHG...

  5. Agriculture and Land Use National Greenhouse Gas Inventory Software...

    Open Energy Info (EERE)

    Agriculture and Land Use National Greenhouse Gas Inventory Software Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Agriculture and Land Use National Greenhouse Gas...

  6. Tools for Forest Carbon Inventory, Management, and Reporting...

    Open Energy Info (EERE)

    of carbon in forests are crucial for forest carbon management, carbon credit trading, national reporting of greenhouse gas inventories to the United Nations Framework...

  7. Building GHGs National Inventory Systems | Open Energy Information

    Open Energy Info (EERE)

    order to enable all developing countries with REDD potential to compile and present their national greenhouse gas inventories, it is absolutely essential that all available...

  8. Greenhouse Gas Training Program for Inventory and Mitigation...

    Open Energy Info (EERE)

    divisionsfuture-perfect Country: South Korea Eastern Asia Language: English References: Greenhouse Gas Training Program for Inventory and Mitigation Modeling1...

  9. 2003 DOE IGCA Inventory Data for web.xls

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3 Commercial and Inherently Governmental FTE Inventory Worksheet Org Unit Additional Information ID Agency Bureau Organization unit City StateCode Country Total FTEs FunctionCode ...

  10. Waste form product characteristics

    SciTech Connect (OSTI)

    Taylor, L.L.; Shikashio, R.

    1995-01-01

    The Department of Energy has operated nuclear facilities at the Idaho National Engineering Laboratory (INEL) to support national interests for several decades. Since 1953, it has supported the development of technologies for the storage and reprocessing of spent nuclear fuels (SNF) and the resultant wastes. However, the 1992 decision to discontinue reprocessing of SNF has left nearly 768 MT of SNF in storage at the INEL with unspecified plans for future dispositioning. Past reprocessing of these fuels for uranium and other resource recovery has resulted in the production of 3800 M{sup 3} calcine and a total inventory of 7600 M{sup 3} of radioactive liquids (1900 M{sup 3} destined for immediate calcination and the remaining sodium-bearing waste requiring further treatment before calcination). These issues, along with increased environmental compliance within DOE and its contractors, mandate operation of current and future facilities in an environmentally responsible manner. This will require satisfactory resolution of spent fuel and waste disposal issues resulting from the past activities. A national policy which identifies requirements for the disposal of SNF and high level wastes (HLW) has been established by the Nuclear Waste Policy Act (NWPA) Sec.8,(b) para(3)) [1982]. The materials have to be conditioned or treated, then packaged for disposal while meeting US Environmental Protection Agency (EPA) and Nuclear Regulatory Commission (NRC) regulations. The spent fuel and HLW located at the INEL will have to be put into a form and package that meets these regulatory criteria. The emphasis of Idaho Chemical Processing Plant (ICPP) future operations has shifted toward investigating, testing, and selecting technologies to prepare current and future spent fuels and waste for final disposal. This preparation for disposal may include mechanical, physical and/or chemical processes, and may differ for each of the various fuels and wastes.

  11. APPENDIX A: Forms and Instructions Form Form R93D-44 Form R93D...

    U.S. Energy Information Administration (EIA) Indexed Site

    and Instructions Form Form R93D-44 Form R93D-03 Form R93D-59 Instructions Form RT94-02 Form RT94-04 Form RT94-0 Form RT94-03 Form RT94-05 Form RT94-06 Instructions Form...

  12. National Bridge Inventory Record Data Submission Requirement | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy National Bridge Inventory Record Data Submission Requirement National Bridge Inventory Record Data Submission Requirement More Documents & Publications Slide 1 Microsoft PowerPoint - 2009.10.27 Bridge Inspection Follow-up Information and Records Management Transition Guidance

  13. 2013 guidance fo real Property Inventory Reporting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    guidance fo real Property Inventory Reporting 2013 guidance fo real Property Inventory Reporting SIGNED_FY13_Rpt_Instructions REV - 2013.08.15.pdf (586.39 KB) More Documents & Publications FY 2012 Federal Real Property Reporting Requirement FY09_Federal_Real_Property_Reporting_Requirements.pdf Guidance for Fiscal Year 2015 Facilities Information Management System Data Validations

  14. Smoothing method aids gas-inventory variance trending

    SciTech Connect (OSTI)

    Mason, R.G. )

    1992-03-23

    This paper reports on a method for determining gas-storage inventory and variance in a natural-gas storage field which uses the equations developed to determine gas-in-place in a production field. The calculations use acquired data for shut-in pressures, reservoir pore volume, and storage gas properties. These calculations are then graphed and trends are developed. Evaluating trends in inventory variance can be enhanced by use of a technique, described here, that smooths the peaks and valleys of an inventory-variance curve. Calculations using the acquired data determine inventory for a storage field whose drive mechanism is gas expansion (that is, volumetric). When used for a dry gas, condensate, or gas-condensate reservoir, the formulas require no further modification. Inventory in depleted oil fields can be determined in this same manner, as well. Some additional calculations, however, must be made to assess the influence of oil production on the gas-storage process.

  15. 2003 DOE IGCA Inventory Data for web.xls | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3 DOE IGCA Inventory Data for web.xls&0; 2003 DOE IGCA Inventory Data for web.xls&0; 2003 DOE IGCA Inventory Data for web.xls&0; (570.91 KB) More Documents & Publications ...

  16. Densified waste form and method for forming

    DOE Patents [OSTI]

    Garino, Terry J.; Nenoff, Tina M.; Sava Gallis, Dorina Florentina

    2016-05-17

    Materials and methods of making densified waste forms for temperature sensitive waste material, such as nuclear waste, formed with low temperature processing using metallic powder that forms the matrix that encapsulates the temperature sensitive waste material. The densified waste form includes a temperature sensitive waste material in a physically densified matrix, the matrix is a compacted metallic powder. The method for forming the densified waste form includes mixing a metallic powder and a temperature sensitive waste material to form a waste form precursor. The waste form precursor is compacted with sufficient pressure to densify the waste precursor and encapsulate the temperature sensitive waste material in a physically densified matrix.

  17. Densified waste form and method for forming

    SciTech Connect (OSTI)

    Garino, Terry J.; Nenoff, Tina M.; Sava Gallis, Dorina Florentina

    2015-08-25

    Materials and methods of making densified waste forms for temperature sensitive waste material, such as nuclear waste, formed with low temperature processing using metallic powder that forms the matrix that encapsulates the temperature sensitive waste material. The densified waste form includes a temperature sensitive waste material in a physically densified matrix, the matrix is a compacted metallic powder. The method for forming the densified waste form includes mixing a metallic powder and a temperature sensitive waste material to form a waste form precursor. The waste form precursor is compacted with sufficient pressure to densify the waste precursor and encapsulate the temperature sensitive waste material in a physically densified matrix.

  18. NMMSS Information, Reports & Forms | National Nuclear Security

    National Nuclear Security Administration (NNSA)

    Administration | (NNSA) NMMSS Information, Reports & Forms D-23 DOE Contractors Rev August 2016 D-24 NRC Licensees Rev August 2016 Change Request Forms Security Forms DOE/NRC Forms Sample Forms NMMSS Reports Code tables References NMMSS Users Guide (pdf) Frequently Asked Questions XML Schema v2 for Transactions (xsd) XML Schema v2 for Inventory (xsd) XML Schema v2 for Material Balance (xsd) NMMSS Contacts NMMSS Working Group (pdf) Newsletters DOE/NRC 741 Crosswalk to SAMS (pdf) NMMSS

  19. 2014 Review of the Potential Impact of DOE Excess Uranium Inventory...

    Energy Savers [EERE]

    of the Potential Impact of DOE Excess Uranium Inventory On the Commercial Markets 2014 Review of the Potential Impact of DOE Excess Uranium Inventory On the Commercial Markets ...

  20. US Releases Updated Plutonium Inventory Report | National Nuclear Security

    National Nuclear Security Administration (NNSA)

    Administration | (NNSA) US Releases Updated Plutonium Inventory Report June 29, 2012 WASHINGTON, D.C. - The National Nuclear Security Administration (NNSA) today announced the public release of a report that details the current plutonium inventory of the U.S. Titled The United States Plutonium Balance, 1944-2009, the document serves as an update to Plutonium: the First 50 Years, which was first released by the Department of Energy (DOE) in 1996. The report provides the U.S. inventory of

  1. Natural gas inventories end the winter at a record high

    U.S. Energy Information Administration (EIA) Indexed Site

    Natural gas inventories end the winter at a record high U.S. natural gas inventories finished the winter heating season at their highest level ever. In its new monthly forecast, the U.S. Energy Information Administration said natural gas stocks at the end of March stood at 2.478 trillion cubic feet. That's slightly above the previous end-of- winter record set in 2012. This year's natural gas inventories are 67% above their 2015 levels and 53% higher than the five- year average for this time of

  2. Plutonium inventories for stabilization and stabilized materials

    SciTech Connect (OSTI)

    Williams, A.K.

    1996-05-01

    The objective of the breakout session was to identify characteristics of materials containing plutonium, the need to stabilize these materials for storage, and plans to accomplish the stabilization activities. All current stabilization activities are driven by the Defense Nuclear Facilities Safety Board Recommendation 94-1 (May 26, 1994) and by the recently completed Plutonium ES&H Vulnerability Assessment (DOE-EH-0415). The Implementation Plan for accomplishing stabilization of plutonium-bearing residues in response to the Recommendation and the Assessment was published by DOE on February 28, 1995. This Implementation Plan (IP) commits to stabilizing problem materials within 3 years, and stabilizing all other materials within 8 years. The IP identifies approximately 20 metric tons of plutonium requiring stabilization and/or repackaging. A further breakdown shows this material to consist of 8.5 metric tons of plutonium metal and alloys, 5.5 metric tons of plutonium as oxide, and 6 metric tons of plutonium as residues. Stabilization of the metal and oxide categories containing greater than 50 weight percent plutonium is covered by DOE Standard {open_quotes}Criteria for Safe Storage of Plutonium Metals and Oxides{close_quotes} December, 1994 (DOE-STD-3013-94). This standard establishes criteria for safe storage of stabilized plutonium metals and oxides for up to 50 years. Each of the DOE sites and contractors with large plutonium inventories has either started or is preparing to start stabilization activities to meet these criteria.

  3. Estonian greenhouse gas emissions inventory report

    SciTech Connect (OSTI)

    Punning, J.M.; Ilomets, M.; Karindi, A.; Mandre, M.; Reisner, V.; Martins, A.; Pesur, A.; Roostalu, H.; Tullus, H.

    1996-07-01

    It is widely accepted that the increase of greenhouse gas concentrations in the atmosphere due to human activities would result in warming of the Earth`s surface. To examine this effect and better understand how the GHG increase in the atmosphere might change the climate in the future, how ecosystems and societies in different regions of the World should adapt to these changes, what must policymakers do for the mitigation of that effect, the worldwide project within the Framework Convention on Climate Change was generated by the initiative of United Nations. Estonia is one of more than 150 countries, which signed the Framework Convention on Climate Change at the United Nations Conference on Environment and Development held in Rio de Janeiro in June 1992. In 1994 a new project, Estonian Country Study was initiated within the US Country Studies Program. The project will help to compile the GHG inventory for Estonia, find contemporary trends to investigate the impact of climate change on the Estonian ecosystems and economy and to formulate national strategies for Estonia addressing to global climate change.

  4. 2008 Toxic Chemical Release Inventory 2008 Toxic Chemical Release Inventory Community Right-to-Know Act of 1986, Title III, Section 313

    SciTech Connect (OSTI)

    Ecology and Air Quality Group

    2009-10-01

    For reporting year 2008, Los Alamos National Laboratory (LANL) submitted a Form R report for lead as required under the Emergency Planning and Community Right-to- Know Act (EPCRA) Section 313. No other EPCRA Section 313 chemicals were used in 2008 above the reportable thresholds. This document was prepared to provide a description of the evaluation of EPCRA Section 313 chemical use and threshold determinations for LANL for calendar year 2008, as well as to provide background information about data included on the Form R reports. Section 313 of EPCRA specifically requires facilities to submit a Toxic Chemical Release Inventory Report (Form R) to the U.S. Environmental Protection Agency (EPA) and state agencies if the owners and operators manufacture, process, or otherwise use any of the listed toxic chemicals above listed threshold quantities. EPA compiles this data in the Toxic Release Inventory database. Form R reports for each chemical over threshold quantities must be submitted on or before July 1 each year and must cover activities that occurred at the facility during the previous year. In 1999, EPA promulgated a final rule on persistent bioaccumulative toxics (PBTs). This rule added several chemicals to the EPCRA Section 313 list of toxic chemicals and established lower reporting thresholds for these and other PBT chemicals that were already reportable. These lower thresholds became applicable in reporting year 2000. In 2001, EPA expanded the PBT rule to include a lower reporting threshold for lead and lead compounds. Facilities that manufacture, process, or otherwise use more than 100 lb of lead or lead compounds must submit a Form R.

  5. Forecasting Crude Oil Spot Price Using OECD Petroleum Inventory Levels

    Reports and Publications (EIA)

    2003-01-01

    This paper presents a short-term monthly forecasting model of West Texas Intermediate crude oil spot price using Organization for Economic Cooperation and Development (OECD) petroleum inventory levels.

  6. Toxic Chemical Release Inventory reporting ``Qs & As``. Environmental Guidance

    SciTech Connect (OSTI)

    Not Available

    1994-03-01

    This document offers guidance on toxic chemical release inventory reporting, pursuant to Section 313 of the Emergency Planning and Community Right-to-Know Act (EPCRA) at DOE sites.

  7. Government-Owned Firearms Inventory at the Nevada National Security...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Government-Owned Firearms Inventory at the Nevada National Security Site INS-L-15-01 ... 3, 2014 MEMORANDUM FOR THE MANAGER, NEVADA FIELD OFFICE FROM: Marilyn E. Richardson ...

  8. PROCEDURE FOR PREPARING RECORDS INVENTORY AND DISPOSITION SCHEDULES...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PROCEDURE FOR PREPARING RECORDS INVENTORY AND DISPOSITION SCHEDULES (RIDS) (48.78 KB) More Documents & Publications DOE F 1324.10 Computer System Retirement Guidelines DOE F 1324.9

  9. Assess and improve the national GHG inventory and other economic...

    Open Energy Info (EERE)

    public and private sector capacity to support initiatives 2.4. Assess and improve the national GHG inventory and other economic and resource data as needed for LEDS development...

  10. U.S. Life Cycle Inventory Database Roadmap (Brochure)

    SciTech Connect (OSTI)

    Deru, M.

    2009-08-01

    Life cycle inventory data are the primary inputs for conducting life cycle assessment studies. Studies based on high-quality data that are consistent, accurate, and relevant allow for robust, defensible, and meaningful results.

  11. U.S. Life Cycle Inventory Database Roadmap

    SciTech Connect (OSTI)

    none,

    2009-08-01

    Life cycle inventory data are the primary inputs for conducting life cycle assessment studies. Studies based on high-quality data that are consistent, accurate, and relevant allow for robust, defensible, and meaningful results.

  12. US Releases Updated Plutonium Inventory Report | National Nuclear...

    National Nuclear Security Administration (NNSA)

    owned by DOE and includes material in the possession of the Department of Defense (DoD). It can be found online at http:nnsa.energy.govplutoniuminventory. File Pu Inventory ...

  13. State Energy Efficiency Program Evaluation Inventory - Energy Information

    Gasoline and Diesel Fuel Update (EIA)

    State Energy Efficiency Program Evaluation Inventory July 2013 Independent Statistics & Analysis www.eia.gov U.S. Department of Energy Washington, DC 20585 U.S. Energy Information Administration | State Energy Efficiency Program Evaluation Inventory i This report was prepared by the U.S. Energy Information Administration (EIA), the statistical and analytical agency within the U.S. Department of Energy. By law, EIA's data, analyses, and forecasts are independent of approval by any other

  14. Inventory Tracking and Management: Fact Sheet | National Nuclear Security

    National Nuclear Security Administration (NNSA)

    Administration | (NNSA) Inventory Tracking and Management: Fact Sheet March 23, 2012 Under International Atomic Energy Agency (IAEA) safeguards agreements, States are required to establish a "state system of accounting and control" (SSAC) to keep track of all nuclear material (quantity and type), note changes in material inventories (imports/exports), and monitor all material balance areas (for material use and/or processing) within safeguarded nuclear facilities. States are

  15. High natural gas output and inventories contribute to lower prices

    U.S. Energy Information Administration (EIA) Indexed Site

    High natural gas output and inventories contribute to lower prices High natural gas production and ample gas inventories are expected to keep natural gas prices relatively low for the rest of 2015. In its new monthly forecast, the U.S. Energy Information Administration says that while expected production growth is slowing from last year's torrid pace, domestic natural gas production in 2015 is still expected to be almost 6 percent above the 2014 level. Higher production has pushed U.S. natural

  16. Forms | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Forms Forms Computer Keyboard Keyboard DOE Forms DOE's forms are developed within the Department and approved by the DOE Forms Manager. The forms provided (below) are designed to serve the needs of two (or more) DOE Headquarters or field organizations. (You must have Adobe Acrobat(R) Reader to view and print the below files. Fillable forms are identified by the "fillable" icon, and require the full version of Adobe Acrobat software.) Forms by Subject Forms by Number Management &

  17. Forms | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Forms Forms The following interactive Web-based forms in Adobe Acrobat Portable Document Format (PDF) are designed for online completion with Acrobat Reader. Input data will ...

  18. CESP Tool 4.2: Activity Inventory Template | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Activity Inventory Template CESP Tool 4.2: Activity Inventory Template Tool 4.2: Activity Inventory Template from the Step 4: Assess the Current Energy Profile, Guide to Community Energy Strategic Planning. CESP Tool 4.2: Activity Inventory Template (12.4 KB) More Documents & Publications CESP Tool 9.1: Monitoring Plan Template CESP Tool 4.2: SWOT Worksheet CESP Tool 7.1: Financing Inventory Template

  19. Science Brief Submission Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Science Brief Submission Form Science Brief Submission Form Print Tuesday, 01 May 2007 00:00 Loading... < Prev

  20. Bounding Radionuclide Inventory and Accident Consequence Calculation for the 1L Target

    SciTech Connect (OSTI)

    Kelsey, Charles T. IV

    2011-01-01

    A bounding radionuclide inventory for the tungsten of the Los Alamos Neutron Science Center (LANSCE) IL Target is calculated. Based on the bounding inventory, the dose resulting from the maximum credible incident (MCI) is calculated for the maximally exposed offsite individual (MEOl). The design basis accident involves tungsten target oxidation following a loss of cooling accident. Also calculated for the bounding radionuclide inventory is the ratio to the LANSCE inventory threshold for purposes of inventory control as described in the target inventory control policy. A bounding radionuclide inventory calculation for the lL Target was completed using the MCNPX and CINDER'90 codes. Continuous beam delivery at 200 {micro}A to 2500 mA{center_dot}h was assumed. The total calculated activity following this irradiation period is 205,000 Ci. The dose to the MEOI from the MCI is 213 mrem for the bounding inventory. The LANSCE inventory control threshold ratio is 132.

  1. 2002 DOE Final Inherently Governmental and Commercial Activities Inventory

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2 Inherently Governmental and Commercial Activities Inventory 12/23/2002 10:51 AM Org Unit Additional Information 2002ID Agency Bureau Organization unit City StateCode Country Total FTEs FunctionCode Status ReasonCode ReasonSub_Code YrFirstOnInventory YearofCostComapre CIF/FTESavings EstAnnualSavings MEOPerfReview 444 019 05 AL ALBUQUERQUE NM US 15 K999 I 1999 452 019 05 AL ALBUQUERQUE NM US 1 R660 I 1999 436 019 05 AL ALBUQUERQUE NM US 1 Y220 I 1999 437 019 05 AL ALBUQUERQUE NM US 1 Y999 I 1999

  2. Page 8, Benefit Forms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Form - 853 Kb - Allows an employee to enroll or waive health insurance coverage. SF-2817 - Life Insurance Election Form (Federal Employee Group Life Insurance) - 120 Kb - ...

  3. Form OE-417

    U.S. Energy Information Administration (EIA) Indexed Site

    Electricity Delivery and Energy Reliability Form OE-417 ELECTRIC EMERGENCY INCIDENT AND DISTURBANCE REPORT Form Approved OMB No. 1901-0288 Approval Expires 03312018 Burden Per...

  4. Form:SampleForm | Open Energy Information

    Open Energy Info (EERE)

    SampleForm Jump to: navigation, search Input the name of a Test Page below. If the resource already exists, you will be able to edit its information. AddEdit a Test Page The text...

  5. Gas-storage calculations yield accurate cavern, inventory data

    SciTech Connect (OSTI)

    Mason, R.G. )

    1990-07-02

    This paper discusses how determining gas-storage cavern size and inventory variance is now possible with calculations based on shut-in cavern surveys. The method is the least expensive of three major methods and is quite accurate when recorded over a period of time.

  6. 'Bradbury Science Museum Collections Inventory Photos Disc #4

    SciTech Connect (OSTI)

    Strohmeyer, Wendy J.

    2015-11-16

    The photos on Bradbury Science Museum Collections Inventory Photos Disc #4 is another in an ongoing effort to catalog all artifacts held by the Museum. Photos will be used as part of the condition report for the artifact, and will become part of the collection record in the collections database for that artifact. The collections database will be publically searchable on the Museum website.

  7. Waste Inventory for Near Surface Repository (NSR) - 13482

    SciTech Connect (OSTI)

    Vaidotas, Algirdas

    2013-07-01

    The main characteristics, physical, chemical as well as radiological of the waste intended to be disposed of in the planned NSR are described. This description is mainly based on the waste inventory investigations performed by the Ignalina Nuclear Power Plant (INPP). The four different waste streams to be disposed of in the NSR are described and investigated. (authors)

  8. EIA Electric Power Forms

    U.S. Energy Information Administration (EIA) Indexed Site

    Electric Power Forms EIA Electric Power Forms Listing of Publicly Available and Confidential Data EIA's statistical surveys encompass each significant electric supply and demand activity in the United States. Most of the electric power survey forms resulting data elements are published, but respondent confidentiality is required. The chart below shows the data elements for each survey form and how each data element is treated in regard to confidentiality. Data Categories Data collection forms

  9. Microsoft Word - NEGTN02-#188646-v22B-INVENTORY_PLAN_UNCLASSIFIED.DOC

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    United States Department of Energy Excess Uranium Inventory Management Plan December 16, 2008 Office of Nuclear Energy 2008 Table of Contents Executive Summary................................................................................................ES-1 Excess Uranium Inventories..........................................................................................1 Unallocated U.S. HEU.........................................................................................1 U.S.-Origin

  10. Analytical services Organization Union Valley sample Preparation facility Polychlorinated Biphenyl (PCB) Annual Inventory Document

    SciTech Connect (OSTI)

    Brown, B.J.

    1998-06-01

    The Analytical Services Organization (ASO), Union Valley Sample Preparation Facility (UVSPF), provides analytical testing in support of the Department of Energy (DOE), Oak Ridge Operations (ORO), and associated sites. Samples generated on the Oak Ridge Reservation (ORR) are routinely received at the WSPF for analytical evaluatiotiidentification. Many of these samples are polychlorinated biphenyl (PCB) regulated from a source or being sent to the facility to determine PCB content. PCB laboratory wastes in solid and liquid form are generated during the evaluation of these materials, requiring the WSPF staff to maintain formal storage areas for staging the materials prior to off-site shipment for disposal. The purpose of this report is to fulfill the requirements set forth in Title 40, Code of Federal Regulations (CFR), Part 761.180(a), Subpart J, which requires owners or operators of a facility using or storing PCBS to prepare an annual inventory document by July 1 of the current year which covers the previous calendar year. This report provides documentation of the inventory of PCB materials/wastes that were generated, stored for dispos~ and shipped off site for disposal for the period January 1, 1997, to January 1, 1998. The following is a summary of materials/wastes subject to the aforementioned reporting requirements.

  11. Terrestrial Carbon Inventory at the Savannah River Site, 1951 – 2001.

    SciTech Connect (OSTI)

    US Forest Service - Annonymous,

    2012-02-01

    A Power Point slide presentation/report on the terestrial carbon inventory at the Savannah River Site.

  12. Preliminary tank characterization report for single-shell tank 241-A-104: best basis inventory

    SciTech Connect (OSTI)

    Hodgson, K.M.

    1997-07-01

    An effort is underway to provide waste inventory estimates that will serve as standard characterization source terms for the various waste management activities. As part of this effort, an evaluation of available information for single-shell tank 241-A-104 was performed, and a best-basis inventory was established. This work follows the methodology that was established by the standard inventory task.

  13. Air Emission Inventory for the Idaho National Engineering and Environmental Laboratory - Calendar Year 1999 Emission Report

    SciTech Connect (OSTI)

    Zohner, S.K.

    2000-05-30

    This report presents the 1999 calendar year update of the Air Emission Inventory for the Idaho National Engineering and Environmental Laboratory (INEEL). The INEEL Air Emission Inventory documents sources and emissions of nonradionuclide pollutants from operations at the INEEL. The report describes the emission inventory process and all of the sources at the INEEL, and provides nonradionuclide emissions estimates for stationary sources.

  14. Air emission inventory for the Idaho National Engineering Laboratory: 1994 emissions report

    SciTech Connect (OSTI)

    1995-07-01

    This report Presents the 1994 update of the Air Emission inventory for the Idaho National Engineering Laboratory (INEL). The INEL Air Emission Inventory documents sources and emissions of non-radionuclide pollutants from operations at the INEL. The report describes the emission inventory process and all of the sources at the INEL, and provides non-radionuclide emissions estimates for stationary sources.

  15. Air Emission Inventory for the Idaho National Engineering and Environmental Laboratory - Calendar Year 1998 Emissions Report

    SciTech Connect (OSTI)

    S. K. Zohner

    1999-10-01

    This report presents the 1998 calendar year update of the Air Emission Inventory for the Idaho National Engineering and Environmental Laboratory (INEEL). The INEEL Air Emission Inventory documents sources and emissions of nonradionuclide pollutants from operations at the INEEL. The report describes the emission inventory process and all of the sources at the INEEL, and provides nonradiological emissions estimates for stationary sources.

  16. Microsoft Word - PPL 970-Materials and Inventory 5-9-05.doc | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy PPL 970-Materials and Inventory 5-9-05.doc Microsoft Word - PPL 970-Materials and Inventory 5-9-05.doc Microsoft Word - PPL 970-Materials and Inventory 5-9-05.doc (22.24 KB) More Documents & Publications Microsoft Word - al95-06.doc DOE-HDBK-1139-2006 ppl970-3.pdf

  17. 2015 Electricity Form Proposals

    Gasoline and Diesel Fuel Update (EIA)

    (Photovoltaic) Survey Forms November 19, 2015 In early 2016 the U.S. Energy Information ... Details will be provided closer to that date. Proposed changes as of December 2015 Forms ...

  18. DVU Training News Form

    Broader source: Energy.gov (indexed) [DOE]

    Training News Form Please complete this form in its entirety and email to ... For Web Team Only NODE DOE F 360.9 (092014) Guidance for Posting to "Training News" ...

  19. FOIA Request Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DOEID Home > FOIA > FOIA Request Form U.S. Department of Energy Idaho (DOE-ID) Operations Office Electronic FOIA Request Form* To make an Electronic FOIA (E-FOIA) request, please...

  20. Standard Form 120

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 OF STANDARD FORM 120 REV. APRIL 1957 GEN. SERV. ADMIN. FPMR (41 CFR) 101-43.311 ... NUMBER FAIR % ITEM DESCRIPTION PER UNIT TOTAL NO. (a) (b) (f) (g) STANDARD FORM 120 REV. ...

  1. Form OE-417

    U.S. Energy Information Administration (EIA) Indexed Site

    | U.S. Department of Energy Electricity Delivery and Energy Reliability Form OE-417|ELECTRIC EMERGENCY INCIDENT AND DISTURBANCE REPORT|Form Approved OMB No. 1901-0288 Approval...

  2. OCPR Forms | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    OCPR Forms OCPR Forms Technology Transfer Reporting Form Agreement to Mediate Form Instructions: Fill out the form and e-mail the completed document to Office of Conflict ...

  3. ORSSAB Membership Application Form

    Broader source: Energy.gov [DOE]

    Resident interested in joining the Oak Ridge Site Specific Advisory Board should complete and submit the included form.

  4. Method for forming ammonia

    DOE Patents [OSTI]

    Kong, Peter C.; Pink, Robert J.; Zuck, Larry D.

    2008-08-19

    A method for forming ammonia is disclosed and which includes the steps of forming a plasma; providing a source of metal particles, and supplying the metal particles to the plasma to form metal nitride particles; and providing a substance, and reacting the metal nitride particles with the substance to produce ammonia, and an oxide byproduct.

  5. Paperwork Reductin Act Form

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PAPERWORK REDUCTION ACT COLLECTION DISCONTINUATION FORM Agency/Subagency OMB Control Number __ __ __ __ - __ __ __ __ Title of Collection: Current Expiration Date Month/Year Requested Expiration Date to Discontinue Collection Month/Year Reason for Discontinuation: Signature of Senior Official or Designee: Date: For OIRA Use ________________________ ________________________ OMB FORM 83-D, 10/04 Reset Form

  6. Tank waste source term inventory validation. Volume 1. Letter report

    SciTech Connect (OSTI)

    Brevick, C.H.; Gaddis, L.A.; Johnson, E.D.

    1995-04-28

    The sample data for selection of 11 radionuclides and 24 chemical analytes were extracted from six separate sample data sets, were arranged in a tabular format and were plotted on scatter plots for all of the 149 single-shell tanks, the 24 double-shell tanks and the four aging waste tanks. The solid and liquid sample data was placed in separate tables and plots. The sample data and plots were compiled from the following data sets: characterization raw sample data, recent core samples, D. Braun data base, Wastren (Van Vleet) data base, TRAC and HTCE inventories. This document is Volume I of the Letter Report entitled Tank Waste Source Term Inventory Validation.

  7. Methods of forming steel

    DOE Patents [OSTI]

    Branagan, Daniel J.; Burch, Joseph V.

    2001-01-01

    In one aspect, the invention encompasses a method of forming a steel. A metallic glass is formed and at least a portion of the glass is converted to a crystalline steel material having a nanocrystalline scale grain size. In another aspect, the invention encompasses another method of forming a steel. A molten alloy is formed and cooled the alloy at a rate which forms a metallic glass. The metallic glass is devitrified to convert the glass to a crystalline steel material having a nanocrystalline scale grain size. In yet another aspect, the invention encompasses another method of forming a steel. A first metallic glass steel substrate is provided, and a molten alloy is formed over the first metallic glass steel substrate to heat and devitrify at least some of the underlying metallic glass of the substrate.

  8. Growth in global oil inventories slows, drawdown in stocks expected in late 2017

    U.S. Energy Information Administration (EIA) Indexed Site

    Growth in global oil inventories slows, drawdown in stocks expected in late 2017 The growth in global oil inventories is expected to slow in response to stronger growth in world oil demand, with inventories now expected to be drawn down during the second half of next year. In its new monthly forecast, the U.S. Energy Information Administration said oil inventories will grow by just under 1 million barrels per day this year. Inventories will continue to grow during the first half of 2017 though

  9. The Information Role of Spot Prices and Inventories

    U.S. Energy Information Administration (EIA) Indexed Site

    Information Role of Spot Prices and Inventories James L. Smith, Rex Thompson, and Thomas Lee June 24, 2014 Independent Statistics & Analysis www.eia.gov U.S. Energy Information Administration Washington, DC 20585 This paper is released to encourage discussion and critical comment. The analysis and conclusions expressed here are those of the authors and not necessarily those of the U.S. Energy Information Administration. WORKING PAPER SERIES June 2014 James L. Smith, Rex Thomas, and Thomas K.

  10. Procurement Forms | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    RFPs relating to construction projects require additional documentation and are located in the "Construction Specific Forms" tab. Representations and Certifications Representations ...

  11. OFFSITE USE FORM

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    OFFSITE USE FORM Fill form out in triplicate, send original to Property Control, m/s 85A, give a copy to the Gate Guard and keep a copy for your files. This form needs to be updated once a year. Stanford Linear Accelerator Center Authorization Record Form: Stanford University Removal of Government Property from SLAC PO Box 4349 premises for Official Use Elsewhere (*) Date: To: Property Control, m/s 85A From: Name E Mail Address Group and Mail Stop SLAC Extension This is to notify you that I have

  12. 2013 Electricity Form Proposals

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Form EIA-861, "Annual Electric Power Industry Report" The EIA-861 survey has historically collected retail sales, revenue, and a variety of information related to demand response ...

  13. Form W-4 (2015

    Office of Environmental Management (EM)

    ... Generally, tax returns and return information are confidential, as required by Code section 6103. The average time and expenses required to complete and file this form will vary ...

  14. SGP Shipment Notification Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PlainsShipment Notification Form SGP Related Links Virtual Tour Facilities and Instruments Central Facility Boundary Facility Extended Facility Intermediate Facility Radiometric...

  15. User Financial Account Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    22013 User Financial Account Form Establish a user financial account at SLAC to procure gases, chemicals, supplies or services to support your experiment at SLAC's user ...

  16. User Financial Account Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    102115 User Financial Account Form Establish a user financial account at SLAC to procure gases, chemicals, supplies or services to support your experiment at SLAC's user ...

  17. Method of forming nanodielectrics

    DOE Patents [OSTI]

    Tuncer, Enis [Knoxville, TN; Polyzos, Georgios [Oak Ridge, TN

    2014-01-07

    A method of making a nanoparticle filled dielectric material. The method includes mixing nanoparticle precursors with a polymer material and reacting the nanoparticle mixed with the polymer material to form nanoparticles dispersed within the polymer material to form a dielectric composite.

  18. Paperwork Reduction Act Forms

    Office of Energy Efficiency and Renewable Energy (EERE)

    You may need to fill out one or several of these forms depending on the nature of your survey or usability project. See the Paperwork Reduction Act Web page for more information about the process. Contact the Web Usability Coordinator if you have questions about which forms to complete.

  19. Method for forming materials

    DOE Patents [OSTI]

    Tolle, Charles R.; Clark, Denis E.; Smartt, Herschel B.; Miller, Karen S.

    2009-10-06

    A material-forming tool and a method for forming a material are described including a shank portion; a shoulder portion that releasably engages the shank portion; a pin that releasably engages the shoulder portion, wherein the pin defines a passageway; and a source of a material coupled in material flowing relation relative to the pin and wherein the material-forming tool is utilized in methodology that includes providing a first material; providing a second material, and placing the second material into contact with the first material; and locally plastically deforming the first material with the material-forming tool so as mix the first material and second material together to form a resulting material having characteristics different from the respective first and second materials.

  20. An Integrated RFID and Barcode Tagged Item Inventory System for Deployment at New Brunswick Laboratory

    SciTech Connect (OSTI)

    Younkin, James R; Kuhn, Michael J; Gradle, Colleen; Preston, Lynne; Thomas, Brigham B.; Laymance, Leesa K; Kuziel, Ron

    2012-01-01

    New Brunswick Laboratory (NBL) has a numerous inventory containing thousands of plutonium and uranium certified reference materials. The current manual inventory process is well established but is a lengthy process which requires significant oversight and double checking to ensure correctness. Oak Ridge National Laboratory has worked with NBL to develop and deploy a new inventory system which utilizes handheld computers with barcode scanners and radio frequency identification (RFID) readers termed the Tagged Item Inventory System (TIIS). Certified reference materials are identified by labels which incorporate RFID tags and barcodes. The label printing process and RFID tag association process are integrated into the main desktop software application. Software on the handheld computers syncs with software on designated desktop machines and the NBL inventory database to provide a seamless inventory process. This process includes: 1) identifying items to be inventoried, 2) downloading the current inventory information to the handheld computer, 3) using the handheld to read item and location labels, and 4) syncing the handheld computer with a designated desktop machine to analyze the results, print reports, etc. The security of this inventory software has been a major concern. Designated roles linked to authenticated logins are used to control access to the desktop software while password protection and badge verification are used to control access to the handheld computers. The overall system design and deployment at NBL will be presented. The performance of the system will also be discussed with respect to a small piece of the overall inventory. Future work includes performing a full inventory at NBL with the Tagged Item Inventory System and comparing performance, cost, and radiation exposures to the current manual inventory process.

  1. Montana MPDES General Information Form (MDEQ Form 1) | Open Energy...

    Open Energy Info (EERE)

    (MDEQ Form 1) Jump to: navigation, search OpenEI Reference LibraryAdd to library Form: Montana MPDES General Information Form (MDEQ Form 1) Abstract Completion of form allows...

  2. ORPS Facility Registration Form

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ORPS FACILITY REGISTRATION FORM Submit completed form to: U.S. Department of Energy AU User Support EMAIL: ORPSsupport@hq.doe.gov PHONE: 800-473-4375 FAX: 301-903-9823 Note:  Only one facility per form  Type or print all entries 1. TYPE OF CHANGE  Add a Facility (Complete Section 1.A, then go to Section 2)  Change a Facility (Complete Section 1.B, then go to Section)  Delete a Facility (Complete Section 1.C, then go to Section 2) A. Add a New Facility Use this section if you are

  3. 2011 Los Alamos National Laboratory Riparian Inventory Results

    SciTech Connect (OSTI)

    Norris, Elizabeth J.; Hansen, Leslie A.; Hathcock, Charles D.; Keller, David C.; Zemlick, Catherine M.

    2012-03-29

    A total length of 36.7 kilometers of riparian habitat were inventoried within LANL boundaries between 2007 and 2011. The following canyons and lengths of riparian habitat were surveyed and inventoried between 2007 and 2011. Water Canyon (9,669 m), Los Alamos Canyon (7,131 m), Pajarito Canyon (6,009 m), Mortandad Canyon (3,110 m), Two-Mile Canyon (2,680 m), Sandia Canyon (2,181 m), Three-Mile Canyon (1,883 m), Canyon de Valle (1,835 m), Ancho Canyon (1,143 m), Canada del Buey (700 m), Sandia Canyon (221 m), DP Canyon (159 m) and Chaquehui Canyon (50 m). Effluent Canyon, Fence Canyon and Potrillo Canyon were surveyed but no areas of riparian habitat were found. Stretches of inventoried riparian habitat were classified for prioritization of treatment, if any was recommended. High priority sites included stretches of Mortandad Canyon, LA Canyon, Pajarito Canyon, Two-Mile Canyon, Sandia Canyon and Water Canyon. Recommended treatment for high priority sites includes placement of objects into the stream channel to encourage sediment deposition, elimination of channel incision, and to expand and slow water flow across the floodplain. Additional stretches were classified as lower priority, and, for other sites it was recommended that feral cattle and exotic plants be removed to aid in riparian habitat recovery. In June 2011 the Las Conchas Wildfire burned over 150,000 acres of land in the Jemez Mountains and surrounding areas. The watersheds above LA Canyon, Water Canyon and Pajarito Canyon were burned in the Las Conchas Wildfire and flooding and habitat alteration were observed in these canyon bottoms (Wright 2011). Post fire status of lower priority areas may change to higher priority for some of the sites surveyed prior to the Las Conchas Wildfire, due to changes in vegetation cover in the adjacent upland watershed.

  4. Neutron Activation Analysis and Product Isotope Inventory Code System.

    Energy Science and Technology Software Center (OSTI)

    1990-10-31

    Version 00 NAC was designed to predict the neutron-induced gamma-ray radioactivity for a wide variety of composite materials. The NAC output includes the input data, a list of all reactions for each constituent element, and the end-of-irradiation disintegration rates for each reaction. NAC also compiles a product isotope inventory containing the isotope name, the disintegration rate, the gamma-ray source strength, and the absorbed dose rate at 1 meter from an unshielded point source. The inducedmore » activity is calculated as a function of irradiation and decay times; the effect of cyclic irradiation can also be calculated.« less

  5. An Interoperability Testing Study: Automotive Inventory Visibility and Interoperability

    SciTech Connect (OSTI)

    Ivezic, Nenad; Kulvatunyou, Boonserm; Frechette, Simon; Jones, Albert

    2004-01-01

    This paper describes a collaborative effort between the NIST and Korean Business-to-Business Interoperability Test Beds to support a global, automotive-industry interoperability project. The purpose of the collaboration is to develop a methodology for validation of interoperable data-content standards implemented across inventory visibility tools within an internationally adopted testing framework. In this paper we describe methods (1) to help the vendors consistently implement prescribed message standards and (2) to assess compliance of those implementations with respect to the prescribed data content standards. We also illustrate these methods in support of an initial proof of concept for an international IV&I scenario.

  6. Image forming apparatus

    DOE Patents [OSTI]

    Satoh, Hisao (Hachioji, JP); Haneda, Satoshi (Hachioji, JP); Ikeda, Tadayoshi (Hachioji, JP); Morita, Shizuo (Hachioji, JP); Fukuchi, Masakazu (Hachioji, JP)

    1996-01-01

    In an image forming apparatus having a detachable process cartridge in which an image carrier on which an electrostatic latent image is formed, and a developing unit which develops the electrostatic latent image so that a toner image can be formed, both integrally formed into one unit. There is provided a developer container including a discharge section which can be inserted into a supply opening of the developing unit, and a container in which a predetermined amount of developer is contained, wherein the developer container is provided to the toner supply opening of the developing unit and the developer is supplied into the developing unit housing when a toner stirring screw of the developing unit is rotated.

  7. Supplier, Vendor Forms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    LANL seeks to do business with qualified companies that offer value and high quality products and services. Contact Small Business Office (505) 667-4419 Email Form No. Name...

  8. STANDARD FORM NO. 64

    Office of Legacy Management (LM)

    qz-5 STANDARD FORM NO. 64 rl . . .' . , G Ojice Memoawl crl LA STATES GOVER pi,+ ip; ; (' , TO : F. M . Belmore, M remtor, Produution Division DATE: Deomnber FROM : R. F. Van Wy ...

  9. User Financial Account Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2/20/13 User Financial Account Form Establish a user financial account at SLAC to procure gases, chemicals, supplies or services to support your experiment at SLAC's user facilities and to send samples, dewars, or other equipment between SLAC and your institution. To open or renew your SLAC user financial account, complete and submit this form along with a Purchase Order (PO) from your institution. The PO should be made to SLAC National Accelerator Laboratory for the amount of estimated

  10. Compute Reservation Request Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Compute Reservation Request Form Compute Reservation Request Form Users can request a scheduled reservation of machine resources if their jobs have special needs that cannot be accommodated through the regular batch system. A reservation brings some portion of the machine to a specific user or project for an agreed upon duration. Typically this is used for interactive debugging at scale or real time processing linked to some experiment or event. It is not intended to be used to guarantee fast

  11. Automatic Estimation of the Radiological Inventory for the Dismantling of Nuclear Facilities

    SciTech Connect (OSTI)

    Garcia-Bermejo, R.; Felipe, A.; Gutierrez, S.; Salas, E.; Martin, N.

    2008-01-15

    The estimation of the radiological inventory of Nuclear Facilities to be dismantled is a process that included information related with the physical inventory of all the plant and radiological survey. Estimation of the radiological inventory for all the components and civil structure of the plant could be obtained with mathematical models with statistical approach. A computer application has been developed in order to obtain the radiological inventory in an automatic way. Results: A computer application that is able to estimate the radiological inventory from the radiological measurements or the characterization program has been developed. In this computer applications has been included the statistical functions needed for the estimation of the central tendency and variability, e.g. mean, median, variance, confidence intervals, variance coefficients, etc. This computer application is a necessary tool in order to be able to estimate the radiological inventory of a nuclear facility and it is a powerful tool for decision taken in future sampling surveys.

  12. Toxic Substances Control Act (TSCA) chemical substances inventory: Revised inventory synonym and preferred name file, February 1996 (for microcomputers). Data file

    SciTech Connect (OSTI)

    1996-02-01

    The TSCA Chemical Substance Inventory on diskette provides chemical identity information for the non-confidential substances on the TSCA Master Inventory File. For infomration on the scope and content of the TSCA Inventory, users can consult the introduction material of the printed TSCA Inventory: 1985 Edition and its 1990 Supplement (PB91-159665 and PB91-145458). The diskettes contain no TSCA Confidential Business Information. New versions of the TSCA Inventory on diskette may be issued at approximately six month intervals. Unlike the printed editions of the TSCA Inventory, the diskette version does not include the generic names for the confidential substances on the Master Inventory File, nor does it include synonyms derived from CAS files for the non-confidential substances. In addition, no search software is provided. The data provided for each chemical substance includes the CAS Registry Number, Preferred CA Index Name, molecular formula, and other appropriate information, such as valid chemical names reported by submitters. The entries are in ascending CAS Registry Number order.

  13. Air Emission Inventory for the Idaho National Engineering Laboratory, 1993 emissions report

    SciTech Connect (OSTI)

    Not Available

    1994-06-01

    This report presents the 1993 update of the Air Emission Inventory for the Idaho National Engineering Laboratory (INEL). The purpose of the Air Emission Inventory is to commence the preparation of the permit to operate application for the INEL, as required by the recently promulgated Title V regulations of the Clean Air Act. The report describes the emission inventory process and all of the sources at the INEL and provides emissions estimates for both mobile and stationary sources.

  14. Natural gas inventories heading to record levels at start of winter heating season

    U.S. Energy Information Administration (EIA) Indexed Site

    Natural gas inventories heading to record levels at start of winter heating season U.S. natural gas inventories are expected to be at record levels to start the winter heating season. In its new forecast, the U.S. Energy Information Administration said the amount of natural gas stored underground should total almost 4 trillion cubic feet by the beginning of November, reflecting record high natural gas production. Inventories could go even higher if heating demand is not strong during October

  15. Uraninum-233 Inventory in Oak Ridge Lightened with First Shipment of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Material from Building 3019 | Department of Energy Uraninum-233 Inventory in Oak Ridge Lightened with First Shipment of Material from Building 3019 Uraninum-233 Inventory in Oak Ridge Lightened with First Shipment of Material from Building 3019 January 5, 2012 - 12:00pm Addthis OAK RIDGE, Tenn. - The first shipment of inventory from Building 3019 at the Oak Ridge National Laboratory arrived at the Nevada Nuclear Security Site (NNSS) on December 22, marking the beginning of the end for the

  16. Methods for forming particles

    DOE Patents [OSTI]

    Fox, Robert V.; Zhang, Fengyan; Rodriguez, Rene G.; Pak, Joshua J.; Sun, Chivin

    2016-06-21

    Single source precursors or pre-copolymers of single source precursors are subjected to microwave radiation to form particles of a I-III-VI.sub.2 material. Such particles may be formed in a wurtzite phase and may be converted to a chalcopyrite phase by, for example, exposure to heat. The particles in the wurtzite phase may have a substantially hexagonal shape that enables stacking into ordered layers. The particles in the wurtzite phase may be mixed with particles in the chalcopyrite phase (i.e., chalcopyrite nanoparticles) that may fill voids within the ordered layers of the particles in the wurtzite phase thus produce films with good coverage. In some embodiments, the methods are used to form layers of semiconductor materials comprising a I-III-VI.sub.2 material. Devices such as, for example, thin-film solar cells may be fabricated using such methods.

  17. ARM - VAP Suggestion Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Suggestion Form Showcase Data ARM Best Estimate Data Products (ARMBE) This is a collection of data products that represents "best estimates" derived from several instruments and/or VAPs. We are interested in your feedback; please contact us. VAP Update Information on new, existing, and future value-added products for July l-September 30, 2015 is now available. Have a VAP idea? Use this form to let us know. Datastream Status Further details on the status of VAPs being processed or

  18. Realtime Queue Request Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Realtime Queue Request Form Realtime Queue Request Form NERSC now supports realtime queues on Cori and Edison. Users can request a small number of on-demand nodes if their jobs have special needs that cannot be accommodated through the regular batch system. The real-time queue enables immediate access to a set of nodes, for jobs that are under the realtime wallclock limit (currently 6 hours). Typically this is used for real time processing linked to some experiment or event. It is not intended

  19. Forms | Princeton Plasma Physics Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Forms Forms Computer Keyboard Keyboard DOE Forms DOE's forms are developed within the Department and approved by the DOE Forms Manager. The forms provided (below) are designed to serve the needs of two (or more) DOE Headquarters or field organizations. (You must have Adobe Acrobat(R) Reader to view and print the below files. Fillable forms are identified by the "fillable" icon, and require the full version of Adobe Acrobat software.) Forms by Subject Forms by Number Management &

  20. Inelastic Scattering Form Factors

    Energy Science and Technology Software Center (OSTI)

    1992-01-01

    ATHENA-IV computes form factors for inelastic scattering calculations, using single-particle wave functions that are eigenstates of motion in either a Woods-Saxon potential well or a harmonic oscillator well. Two-body forces of Gauss, Coulomb, Yukawa, and a sum of cut-off Yukawa radial dependences are available.

  1. Method for forming targets

    DOE Patents [OSTI]

    Woerner, Robert L.

    1979-01-01

    Method for cryoinduced uniform deposition of cryogenic materials, such as deuterium-tritium (DT) mixtures, on the inner surface of hollow spherical members, such as inertially imploded targets. By vaporizing and quickly refreezing cryogenic materials contained within a hollow spherical member, a uniform layer of the materials is formed on the inner surface of the spherical member. Heating of the cryogenic material, located within a non-isothermal compact freezing cell, is accomplished by an electrical heat pulse, whereafter the material is quickly frozen forming a uniform layer on the inner surface of the spherical member. The method is not restricted to producing a frozen layer on only the inner surface of the innermost hollow member, but where multiple concentric hollow spheres are involved, such as in multiple shell targets for lasers, electron beams, etc., layers of cryogenic material may also be formed on the inner surface of intermediate or outer spherical members, thus providing the capability of forming targets having multiple concentric layers or shells of frozen DT.

  2. Apparatus for forming targets

    DOE Patents [OSTI]

    Woerner, Robert L.

    1980-01-01

    Apparatus and method for cryoinduced uniform deposition of cryogenic materials, such as deuterium-tritium (DT) mixtures, on the inner surface of hollow spherical members, such as inertially imploded targets. By vaporizing and quickly refreezing cryogenic materials contained within a hollow spherical member, a uniform layer of the materials is formed on the inner surface of the spherical member. Heating of the cryogenic material, located within a non-isothermal compact freezing cell, is accomplished by an electrical heat pulse, whereafter the material is quickly frozen forming a uniform layer on the inner surface of the spherical member. The method is not restricted to producing a frozen layer on only the inner surface of the innermost hollow member, but where multiple concentric hollow spheres are involved, such as in multiple shell targets for lasers, electron beams, etc., layers of cryogenic material may also be formed on the inner surface of intermediate or outer spherical members, thus providing the capability of forming targets having multiple concentric layers or shells of frozen DT.

  3. Formed photovoltaic module busbars

    SciTech Connect (OSTI)

    Rose, Douglas; Daroczi, Shan; Phu, Thomas

    2015-11-10

    A cell connection piece for a photovoltaic module is disclosed herein. The cell connection piece includes an interconnect bus, a plurality of bus tabs unitarily formed with the interconnect bus, and a terminal bus coupled with the interconnect bus. The plurality of bus tabs extend from the interconnect bus. The terminal bus includes a non-linear portion.

  4. Coach Compliance Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Coach Compliance Form My team is participating in theNational Renewable Energy Laboratory's Lithium-Ion Battery Car Competition. I have reviewed the following documents with the participating students: o Safety Hazards of Batteries o Material Safety Data Sheet - Lithium Polymer Battery o Electric Battery Car Competition Rules ______________________________ ______________ Coach Signature Date Name of School: ____________________________________________ Name of Coach (Please Print):

  5. Inventory of power plants in the United States, 1993

    SciTech Connect (OSTI)

    Not Available

    1994-12-01

    The Inventory of Power Plants in the United States is prepared annually by the Survey Management Division, Office of Coal, Nuclear, Electric and Alternate Fuels, Energy Information Administration (EIA), U.S. Department of Energy (DOE). The purpose of this publication is to provide year-end statistics about electric generating units operated by electric utilities in the United States (the 50 States and the District of Columbia). The publication also provides a 10-year outlook of future generating unit additions. Data summarized in this report are useful to a wide audience including Congress, Federal and State agencies, the electric utility industry, and the general public. Data presented in this report were assembled and published by the EIA to fulfill its data collection and dissemination responsibilities as specified in the Federal Energy Administration Act of 1974 (Public Law 93-275) as amended.

  6. Regional cooperation to establish a pooled spare parts inventory system

    SciTech Connect (OSTI)

    Deutsch, R.W.; Chung, B.H.; Chu, I.H.; Bromenschenkel, K.E.

    1985-01-01

    Traditionally, United States electric utilities have had informal agreements to share their spare parts with other utilities when emergency situations arise and the affected utility plant has no spare parts to perform a repair. The part(s) used in the repair are replaced later by the borrowing utility. It was recognized several years ago that formal agreements among a large number of utilities would better serve the objectives of these utilities to ensure equipment and spare parts are available if needed. The purpose of this paper is to describe in some detail a pooled spare parts inventory system in existence in the United States and recommend a method of extending the pooling system concept to the Pacific Basin Nuclear Countries.

  7. Inventory of power plants in the United States 1994

    SciTech Connect (OSTI)

    1995-10-18

    The Inventory of Power Plants in the US provides year-end statistics on generating units operated by electric utilities in the US (the 50 States and the District of Columbia). Statistics presented in this report reflect the status of generating units as of December 31, 1994. The publication also provides a 10-year outlook for generating unit additions. This report is prepared annually by the Coal and Electric Data and Renewables Division; Office of Coal, Nuclear, Electric and Alternate Fuels; Energy Information Administration (EIA); US Department of Energy (DOE). Data summarized in this report are useful to a wide audience including Congress, Federal, and State agencies; the electric utility industry; and the general public. This is a report of electric utility data; in cases where summary data of nonutility capacity are presented, it is specifically noted as such.

  8. System and method for inventorying multiple remote objects

    DOE Patents [OSTI]

    Carrender, Curtis L.; Gilbert, Ronald W.

    2009-12-29

    A system and method of inventorying multiple objects utilizing a multi-level or a chained radio frequency identification system. The system includes a master tag and a plurality of upper level tags and lower level tags associated with respective objects. The upper and lower level tags communicate with each other and the master tag so that reading of the master tag reveals the presence and absence of upper and lower level tags. In the chained RF system, the upper and lower level tags communicate locally with each other in a manner so that more remote tags that are out of range of some of the upper and lower level tags have their information relayed through adjacent tags to the master tag and thence to a controller.

  9. System and method for inventorying multiple remote objects

    DOE Patents [OSTI]

    Carrender, Curtis L.; Gilbert, Ronald W.

    2007-10-23

    A system and method of inventorying multiple objects utilizing a multi-level or a chained radio frequency identification system. The system includes a master tag and a plurality of upper level tags and lower level tags associated with respective objects. The upper and lower level tags communicate with each other and the master tag so that reading of the master tag reveals the presence and absence of upper and lower level tags. In the chained RF system, the upper and lower level tags communicate locally with each other in a manner so that more remote tags that are out of range of some of the upper and lower level tags have their information relayed through adjacent tags to the master tag and thence to a controller.

  10. Process integrated modelling for steelmaking Life Cycle Inventory analysis

    SciTech Connect (OSTI)

    Iosif, Ana-Maria Hanrot, Francois Ablitzer, Denis

    2008-10-15

    During recent years, strict environmental regulations have been implemented by governments for the steelmaking industry in order to reduce their environmental impact. In the frame of the ULCOS project, we have developed a new methodological framework which combines the process integrated modelling approach with Life Cycle Assessment (LCA) method in order to carry out the Life Cycle Inventory of steelmaking. In the current paper, this new concept has been applied to the sinter plant which is the most polluting steelmaking process. It has been shown that this approach is a powerful tool to make the collection of data easier, to save time and to provide reliable information concerning the environmental diagnostic of the steelmaking processes.

  11. Formed HIP Can Processing

    SciTech Connect (OSTI)

    Clarke, Kester Diederik

    2015-07-27

    The intent of this report is to document a procedure used at LANL for HIP bonding aluminum cladding to U-10Mo fuel foils using a formed HIP can for the Domestic Reactor Conversion program in the NNSA Office of Material, Management and Minimization, and provide some details that may not have been published elsewhere. The HIP process is based on the procedures that have been used to develop the formed HIP can process, including the baseline process developed at Idaho National Laboratory (INL). The HIP bonding cladding process development is summarized in the listed references. Further iterations with Babcock & Wilcox (B&W) to refine the process to meet production and facility requirements is expected.

  12. FOIA Request Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Southwestern Power Administration To make an FOIA request, please provide the information below. Failure to enter accurate and complete information may render your FOIA request impossible to fulfill. * Requests submitted under the Privacy Act must be signed and, therefore, cannot be submitted on this form. Contact Information Name Organization Address Fax Number Phone Number Email Address Reasonably Describe Records Describe the specific record (s) you seek with sufficient detail that a

  13. NEPA Determination Form

    National Nuclear Security Administration (NNSA)

    LA NEPA COMPLIANCE DETERMINATION FORM PRID - 09P-0059 V2 Page 1 of 8 Project/Activity Title: TA-3 Substation Replacement Project PRID: 09P-0059 V2 Date: February 16, 2016 Purpose: The proposed demolition and replacement of the Los Alamos National Laboratory's (LANL) Technical Area (TA)-3 electrical power substation is needed to provide reliable and efficient electrical distribution systems with sufficient electrical capacity to support the national security missions. The electrical distribution

  14. Scoping Inventory Calculations for the Rare Isotope Accelerator

    SciTech Connect (OSTI)

    Ahle, L E; Boles, J L

    2003-07-25

    This document is a report on our activities in FY03 exploring nuclear safety and hazard analysis issues relevant to the Rare Isotope Accelerator (RIA). It is not clear whether DOE will classify the RIA as an accelerator facility subject to the accelerator-specific safety requirements of DOE Order 420.2A or as a nonreactor nuclear facility subject to the requirements of 10 CFR 830. The final outcome of this issue will have significant impact on the construction and operation of the facility and the quality assurance requirements for items or services that may affect nuclear safety. The resolution of this issue will be an important earlier decision for the RIA project team and will require early consultation with the appropriate DOE authorities. For nuclear facilities, facility hazard classification depends on the inventory of releasable radionuclides; therefore, some simplistic, scoping inventory calculations for some assumed targets and beams are done to estimate the hazard category of RIA if it is declared a nuclear facility. These calculations show that for the scenarios analyzed, RIA would produce sufficient quantities of radionuclides to be classified as a Category 3 nuclear facility. Over the lifetime of RIA operations, it may be possible to build up Category 2 quantities of {sup 227}Ac and {sup 228}Th. A storage building, separate from the driver, target, and experimental buildings, used to store and isolate accumulated targets and other hardware, can mitigate the potential impact on RIA. The more onerous requirements of Category 2 facilities would only be imposed on the storage facility and not on the rest of the RIA facilities. Some of the differences in a category 2 and category 3 facility are discussed in Appendix 1.

  15. Materials Inventory Database for the Light Water Reactor Sustainability Program

    SciTech Connect (OSTI)

    Kazi Ahmed; Shannon M. Bragg-Sitton

    2013-08-01

    Scientific research involves the purchasing, processing, characterization, and fabrication of many sample materials. The history of such materials can become complicated over their lifetime – materials might be cut into pieces or moved to various storage locations, for example. A database with built-in functions to track these kinds of processes facilitates well-organized research. The Material Inventory Database Accounting System (MIDAS) is an easy-to-use tracking and reference system for such items. The Light Water Reactor Sustainability Program (LWRS), which seeks to advance the long-term reliability and productivity of existing nuclear reactors in the United States through multiple research pathways, proposed MIDAS as an efficient way to organize and track all items used in its research. The database software ensures traceability of all items used in research using built-in functions which can emulate actions on tracked items – fabrication, processing, splitting, and more – by performing operations on the data. MIDAS can recover and display the complete history of any item as a simple report. To ensure the database functions suitably for the organization of research, it was developed alongside a specific experiment to test accident tolerant nuclear fuel cladding under the LWRS Advanced Light Water Reactor Nuclear Fuels Pathway. MIDAS kept track of materials used in this experiment from receipt at the laboratory through all processes, test conduct and, ultimately, post-test analysis. By the end of this process, the database proved to be right tool for this program. The database software will help LWRS more efficiently conduct research experiments, from simple characterization tests to in-reactor experiments. Furthermore, MIDAS is a universal tool that any other research team could use to organize their material inventory.

  16. NWCF Evaporator Tank System 2001 Offgas Emissions Inventory

    SciTech Connect (OSTI)

    Boardman, R.D.; Lamb, K.M.; Matejka, L.A.; Nenni, J.A.

    2002-02-27

    An offgas emissions inventory and liquid stream characterization of the Idaho New Waste Calcining Facility (NWCF) Evaporator Tank System (ETS), formerly known as the High Level Liquid Waste Evaporator (HLLWE), has been completed. The emissions rates of volatile and semi-volatile organic compounds, multiple metals, particulate, and hydrochloric acid were measured in accordance with an approved Quality Assurance Project Plan (QAPjP) and Test Plan that invoked U.S. Environmental Protection Agency (EPA) standard sample collection and analysis procedures. Offgas samples were collected during the start up and at the end of evaporator batches when it was hypothesized the emissions would be at peak rates. Corresponding collection of samples from the evaporator feed overhead condensate, and bottoms was made at approximately the same time as the emissions inventory to support material balance determinations for the evaporator process. The data indicate that organic compound emissions are slightly higher at the beginning of the batch while metals emissions, including mercury, are slightly higher at the end of the evaporator batch. The maximum emissions concentrations are low for all constituents of primary concern. Mercury emissions were less than 5 ppbv, while the sum of HCl and Cl2 emissions was less than 1 ppmv. The sum of all organic emissions also was less than 1 ppmv. The estimated hazardous quotient (HQ) for the evaporator was 6.2e-6 as compared to 0.25 for the EPA target criteria. The cancer risk was 1.3e-10 compared to an EPA target of le-5.

  17. NWCF Evaporator Tank System 2001 Offgas Emissions Inventory

    SciTech Connect (OSTI)

    Boardman, Richard Doin; Lamb, Kenneth Mitchel; Matejka, Leon Anthony; Nenni, Joseph A

    2002-02-01

    An offgas emissions inventory and liquid stream characterization of the Idaho New Waste Calcining Facility (NWCF) Evaporator Tank System (ETS), formerly known as the High Level Liquid Waste Evaporator (HLLWE), has been completed. The emissions rates of volatile and semi-volatile organic compounds, multiple metals, particulate, and hydrochloric acid were measured in accordance with an approved Quality Assurance Project Plan (QAPjP) and Test Plan that invoked U.S. Environmental Protection Agency (EPA) standard sample collection and analysis procedures. Offgas samples were collected during the start up and at the end of evaporator batches when it was hypothesized the emissions would be at peak rates. Corresponding collection of samples from the evaporator feed overhead condensate, and bottoms was made at approximately the same time as the emissions inventory to support material balance determinations for the evaporator process. The data indicate that organic compound emissions are slightly higher at the beginning of the batch while metals emissions, including mercury, are slightly higher at the end of the evaporator batch. The maximum emissions concentrations are low for all constituents of primary concern. Mercury emissions were less than 5 ppbv, while the sum of HCl and Cl2 emissions was less than 1 ppmv. The sum of all organic emissions also was less than 1 ppmv. The estimated hazardous quotient (HQ) for the evaporator was 6.2e-6 as compared to 0.25 for the EPA target criteria. The cancer risk was 1.3e-10 compared to an EPA target of le-5.

  18. DOCUMENT RELEASE FORM C

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    RELEASE FORM C (1) Document Number: RPP-RPT-431 74 (2) Revision Number: (3) Effective Date: 9/30/2009 (4) Document Type: El Digital Image El Hard copy (a) Number of pages (including the DRF) or 107 E PDF E] Video number of digital images (5) Release Type 0 New El Cancel El Page Change El complete Revision (6) Document Title: 2009 Auto-TOR for Tank 241 -T-204 (7) Change/Release Initial Issuance Description: (8) Change Initial Issuance Justification: (9) Associated (a) Structure Location: (c)

  19. GlassForm

    Energy Science and Technology Software Center (OSTI)

    2011-09-16

    GlassForm is a software tool for generating preliminary waste glass formulas for a given waste stream. The software is useful because it reduces the number of verification melts required to develop a suitable additive composition. The software includes property models that calculate glass properties of interest from the chemical composition of the waste glass. The software includes property models for glass viscosity, electrical conductivity, glass transition temperature, and leach resistance as measured by the 7-daymore » product consistency test (PCT).« less

  20. L CONSENT FORM

    Office of Legacy Management (LM)

    QX77C 4 ~' ~~~>~wrN: L CONSENT FORM Employees, contractor personnel , and agents of the U.S. Department of Energy are hereby given permission to enter upon the property described below in order to perform the radiation survey described in the attached letter dated SEP 9 1980 . Froperty Description: Electromet Division, Union Carbide Corporation Niaqara Falls, New York i i ,~' ow "Name C,&L -fldais Di I/. l-9?& ludid%L Signature by owner(s) of property or authorized representative

  1. Bipolar pulse forming line

    DOE Patents [OSTI]

    Rhodes, Mark A.

    2008-10-21

    A bipolar pulse forming transmission line module for linear induction accelerators having first, second, third, fourth, and fifth planar conductors which form an interleaved stack with dielectric layers between the conductors. Each conductor has a first end, and a second end adjacent an acceleration axis. The first and second planar conductors are connected to each other at the second ends, the fourth and fifth planar conductors are connected to each other at the second ends, and the first and fifth planar conductors are connected to each other at the first ends via a shorting plate adjacent the first ends. The third planar conductor is electrically connectable to a high voltage source, and an internal switch functions to short a high voltage from the first end of the third planar conductor to the first end of the fourth planar conductor to produce a bipolar pulse at the acceleration axis with a zero net time integral. Improved access to the switch is enabled by an aperture through the shorting plate and the proximity of the aperture to the switch.

  2. DSNF AND OTHER WASTE FORM DEGRADATION ABSTRACTION

    SciTech Connect (OSTI)

    J. CUNNANE

    2004-11-19

    Several hundred distinct types of DOE-owned spent nuclear fuel (DSNF) may potentially be disposed in the Yucca Mountain repository. These fuel types represent many more types than can be viably individually examined for their effect on the Total System Performance Assessment for the License Application (TSPA-LA). Additionally, for most of these fuel types, there is no known direct experimental test data for the degradation and dissolution of the waste form in repository groundwaters. The approach used in the TSPA-LA model is, therefore, to assess available information on each of 11 groups of DSNF, and to identify a model that can be used in the TSPA-LA model without differentiating between individual codisposal waste packages containing different DSNF types. The purpose of this report is to examine the available data and information concerning the dissolution kinetics of DSNF matrices for the purpose of abstracting a degradation model suitable for use in describing degradation of the DSNF inventory in the Total System Performance Assessment for the License Application. The data and information and associated degradation models were examined for the following types of DSNF: Group 1--Naval spent nuclear fuel; Group 2--Plutonium/uranium alloy (Fermi 1 SNF); Group 3--Plutonium/uranium carbide (Fast Flux Test Facility-Test Fuel Assembly SNF); Group 4--Mixed oxide and plutonium oxide (Fast Flux Test Facility-Demonstration Fuel Assembly/Fast Flux Test Facility-Test Demonstration Fuel Assembly SNF); Group 5--Thorium/uranium carbide (Fort St. Vrain SNF); Group 6--Thorium/uranium oxide (Shippingport light water breeder reactor SNF); Group 7--Uranium metal (N Reactor SNF); Group 8--Uranium oxide (Three Mile Island-2 core debris); Group 9--Aluminum-based SNF (Foreign Research Reactor SNF); Group 10--Miscellaneous Fuel; and Group 11--Uranium-zirconium hydride (Training Research Isotopes-General Atomics SNF). The analyses contained in this document provide an ''upper-limit'' (i

  3. A Computer Program To Evaluate The Dynamic Fission Product Inventories in the Multiple Compartment System of PWR's.

    Energy Science and Technology Software Center (OSTI)

    1990-12-01

    Version 00 SACHET evaluates the dynamic fission (FP) product inventories in the multiple compartment system of pressurized water reactor plants.

  4. Fermilab | Fermilab at Work | Web Form | Feedback Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Feedback Form Use the form below to submit a suggestion to senior management. Required fields are marked with an asterisk (*). Suggestion: Name: Email Address: Submit Last modified...

  5. Nucleon Electromagnetic Form Factors

    SciTech Connect (OSTI)

    Marc Vanderhaeghen; Charles Perdrisat; Vina Punjabi

    2007-10-01

    There has been much activity in the measurement of the elastic electromagnetic proton and neutron form factors in the last decade, and the quality of the data has greatly improved by performing double polarization experiments, in comparison with previous unpolarized data. Here we review the experimental data base in view of the new results for the proton, and neutron, obtained at JLab, MAMI, and MIT-Bates. The rapid evolution of phenomenological models triggered by these high-precision experiments will be discussed, including the recent progress in the determination of the valence quark generalized parton distributions of the nucleon, as well as the steady rate of improvements made in the lattice QCD calculations.

  6. Radionuclide Inventory Distribution Project Data Evaluation and Verification White Paper

    SciTech Connect (OSTI)

    NSTec Environmental Restoration

    2010-05-17

    Testing of nuclear explosives caused widespread contamination of surface soils on the Nevada Test Site (NTS). Atmospheric tests produced the majority of this contamination. The Radionuclide Inventory and Distribution Program (RIDP) was developed to determine distribution and total inventory of radionuclides in surface soils at the NTS to evaluate areas that may present long-term health hazards. The RIDP achieved this objective with aerial radiological surveys, soil sample results, and in situ gamma spectroscopy. This white paper presents the justification to support the use of RIDP data as a guide for future evaluation and to support closure of Soils Sub-Project sites under the purview of the Federal Facility Agreement and Consent Order. Use of the RIDP data as part of the Data Quality Objective process is expected to provide considerable cost savings and accelerate site closures. The following steps were completed: - Summarize the RIDP data set and evaluate the quality of the data. - Determine the current uses of the RIDP data and cautions associated with its use. - Provide recommendations for enhancing data use through field verification or other methods. The data quality is sufficient to utilize RIDP data during the planning process for site investigation and closure. Project planning activities may include estimating 25-millirem per industrial access year dose rate boundaries, optimizing characterization efforts, projecting final end states, and planning remedial actions. In addition, RIDP data may be used to identify specific radionuclide distributions, and augment other non-radionuclide dose rate data. Finally, the RIDP data can be used to estimate internal and external dose rates. The data quality is sufficient to utilize RIDP data during the planning process for site investigation and closure. Project planning activities may include estimating 25-millirem per industrial access year dose rate boundaries, optimizing characterization efforts, projecting final

  7. Form 1 | Open Energy Information

    Open Energy Info (EERE)

    Form 1 Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- Permit ApplicationPermit Application: Form 1Legal Abstract Form 1: General Information,...

  8. HDOT Forms | Open Energy Information

    Open Energy Info (EERE)

    HDOT Forms Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: HDOT FormsLegal Abstract The State of Hawaii Forms Central webpage...

  9. DOE Form 1322.4

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2.4 (09-13) All other editions are obsolete. Instructions: Forward completed checklist/approval form(s) to your organizational Forms Manager for review and coordination of approval. Forms are approved by IM-23. U.S. DEPARTMENT OF ENERGY FORMS CHECKLIST / APPROVAL I. ANALYSIS II. DESIGN, PRINTING AND STORAGE 1. ACTION REQUIRED 4. DATA COLLECTION 2. TITLE 5. Current Form No.: 6. Prescribing Directive: 3. FREQUENCY OF USE Single Daily Weekly Quarterly Monthly Annually Semi-Annually New Revision

  10. Heavy metal inventory and fuel sustainability of recycling TRU in FBR design

    SciTech Connect (OSTI)

    Permana, Sidik; Suzuki, Mitsutoshi; Su'ud, Zaki

    2012-06-06

    Nuclear fuel materials from spent fuel of light water reactors have a potential to be used for destructive devices with very huge energy release or in the same time, it can be utilized as a peaceful energy or civil applications, for generating electricity, desalination of water, medical application and others applications. Several research activities showed some recycled spent fuel can be used as additional fuel loading for increasing fuel breeding capability as well as improving intrinsic aspect of nuclear non-proliferation. The present investigation intends to evaluate the composition of heavy metals inventories and fuel breeding capability in the FBR design based on the loaded fuel of light water reactor (LWR) spent fuel (SF) of 33 GWd/t with 5 years cooling time by adopting depletion code of ORIGEN. Whole core analysis of FBR design is performed by adopting and coupling codes such as SLAROM code, JOINT and CITATION codes. Nuclear data library, JFS-3-J-3.2R which is based on the JENDL 3.2 has been used for nuclear data analysis. JSFR design is the basis design reference which basically adopted 800 days cycle length for 4 batches system. Higher inventories of plutonium of MOX fuel and TRU fuel types at equilibrium composition than initial composition have been shown. Minor actinide (MA) inventory compositions obtain a different inventory trends at equilibrium composition for both fuel types. Higher Inventory of MA is obtained by MOX fuel and less MA inventory for TRU fuel at equilibrium composition than initial composition. Some different MA inventories can be estimated from the different inventory trend of americium (Am). Higher americium inventory for MOX fuel and less americium inventory for TRU fuel at equilibrium condition. Breeding ratio of TRU fuel is relatively higher compared with MOX fuel type. It can be estimated from relatively higher production of Pu-238 (through converted MA) in TRU fuel, and Pu-238 converts through neutron capture to produce Pu-239

  11. Appendix B - Chemical and Radiological Inventories for the CEMRC, pages 1-4

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    B-1 APPENDIX B CHEMICAL AND RADIOLOGICAL INVENTORIES FOR THE CEMRC The current inventories of chemicals and radiological materials at the Carlsbad Environmental Monitoring and Research Center (CEMRC) are provided in Tables B-1 and B-2, respectively. These tables were provided by Joel Webb, Director of the CEMRC, New Mexico State University (Webb 2002). Table B-1. Onsite CEMRC Chemical Inventory Chemical Name Amount Units SARA Limit Acetic Acid, Glacial 5,400 mL NA a Acetone 38 L NA AA Modifier

  12. Natural gas inventories to remain high at end of winter heating season

    U.S. Energy Information Administration (EIA) Indexed Site

    Natural gas inventories to remain high at end of winter heating season Despite the jump in natural gas use to meet heating demand during the recent winter storm that walloped the East Coast, total U.S. natural gas inventories remain near 3 trillion cubic feet. That's about 20 percent higher than at this time last year. In its new monthly forecast, the U.S. Energy Information Administration said that by the end of the winter heating season at the close of March, it expects natural gas inventories

  13. Oil inventories in industrialized countries to reach record high at end of 2015

    U.S. Energy Information Administration (EIA) Indexed Site

    Oil inventories in industrialized countries to reach record high at end of 2015 The amount of year-end oil inventories held in industrialized countries is expected to be the highest on record in 2015. In its monthly forecast, the U.S. Energy Information Administration said it expects commercial oil inventories in the United States and other industrialized countries to total 2.83 billion barrels at the end of this year almost 90 million barrels more than at the end of 2014. Global oil production

  14. Record U.S. oil inventories continue increasing over next two months

    U.S. Energy Information Administration (EIA) Indexed Site

    Record U.S. oil inventories continue increasing over next two months U.S. commercial crude oil inventories which are already at the highest level since 1930 are expected to continue growing over the next two months. Crude oil stocks increased by an average of over 500,000 barrels per day during the last five months climbing to 444 million barrels at the end of February. In its new monthly forecast, the U.S. Energy Information Administration said the increase in oil inventories will moderate as

  15. Inventory of Power Plants in the United States, October 1992

    SciTech Connect (OSTI)

    Not Available

    1993-10-27

    The Inventory of Power Plants in the United States is prepared annually by the Survey Management Division, Office of Coal, Nuclear, Electric and Alternate Fuels, Energy Information Administration (EIA), US Department of Energy (DOE). The purpose of this publication is to provide year-end statistics about electric generating units operated by electric utilities in the United States (the 50 States and the District of Columbia). The publication also provides a 10-year outlook of future generating unit additions. Data summarized in this report are useful to a wide audience including Congress, Federal and State agencies, the electric utility industry, and the general public. Data presented in this report were assembled and published by the EIA to fulfill its data collection and dissemination responsibilities as specified in the Federal Energy Administration Act of 1974 (Public Law 93-275) as amended. The report is organized into the following chapters: Year in Review, Operable Electric Generating Units, and Projected Electric Generating Unit Additions. Statistics presented in these chapters reflect the status of electric generating units as of December 31, 1992.

  16. Water inventory management in condenser pool of boiling water reactor

    DOE Patents [OSTI]

    Gluntz, D.M.

    1996-03-12

    An improved system for managing the water inventory in the condenser pool of a boiling water reactor has means for raising the level of the upper surface of the condenser pool water without adding water to the isolation pool. A tank filled with water is installed in a chamber of the condenser pool. The water-filled tank contains one or more holes or openings at its lowermost periphery and is connected via piping and a passive-type valve (e.g., squib valve) to a high-pressure gas-charged pneumatic tank of appropriate volume. The valve is normally closed, but can be opened at an appropriate time following a loss-of-coolant accident. When the valve opens, high-pressure gas inside the pneumatic tank is released to flow passively through the piping to pressurize the interior of the water-filled tank. In so doing, the initial water contents of the tank are expelled through the openings, causing the water level in the condenser pool to rise. This increases the volume of water available to be boiled off by heat conducted from the passive containment cooling heat exchangers. 4 figs.

  17. Water inventory management in condenser pool of boiling water reactor

    DOE Patents [OSTI]

    Gluntz, Douglas M.

    1996-01-01

    An improved system for managing the water inventory in the condenser pool of a boiling water reactor has means for raising the level of the upper surface of the condenser pool water without adding water to the isolation pool. A tank filled with water is installed in a chamber of the condenser pool. The water-filled tank contains one or more holes or openings at its lowermost periphery and is connected via piping and a passive-type valve (e.g., squib valve) to a high-pressure gas-charged pneumatic tank of appropriate volume. The valve is normally closed, but can be opened at an appropriate time following a loss-of-coolant accident. When the valve opens, high-pressure gas inside the pneumatic tank is released to flow passively through the piping to pressurize the interior of the water-filled tank. In so doing, the initial water contents of the tank are expelled through the openings, causing the water level in the condenser pool to rise. This increases the volume of water available to be boiled off by heat conducted from the passive containment cooling heat exchangers. 4 figs.

  18. Defense Nuclear Material Stewardship Integrated Inventory Information Management System (IIIMS).

    SciTech Connect (OSTI)

    Aas, Christopher A.; Lenhart, James E.; Bray, Olin H.; Witcher, Christina Jenkin

    2004-11-01

    Sandia National Laboratories was tasked with developing the Defense Nuclear Material Stewardship Integrated Inventory Information Management System (IIIMS) with the sponsorship of NA-125.3 and the concurrence of DOE/NNSA field and area offices. The purpose of IIIMS was to modernize nuclear materials management information systems at the enterprise level. Projects over the course of several years attempted to spearhead this modernization. The scope of IIIMS was broken into broad enterprise-oriented materials management and materials forecasting. The IIIMS prototype was developed to allow multiple participating user groups to explore nuclear material requirements and needs in detail. The purpose of material forecasting was to determine nuclear material availability over a 10 to 15 year period in light of the dynamic nature of nuclear materials management. Formal DOE Directives (requirements) were needed to direct IIIMS efforts but were never issued and the project has been halted. When restarted, duplicating or re-engineering the activities from 1999 to 2003 is unnecessary, and in fact future initiatives can build on previous work. IIIMS requirements should be structured to provide high confidence that discrepancies are detected, and classified information is not divulged. Enterprise-wide materials management systems maintained by the military can be used as overall models to base IIIMS implementation concepts upon.

  19. Radionuclide inventory for the Waste Isolation Pilot Plant

    SciTech Connect (OSTI)

    Not Available

    1991-12-31

    This report updates the information previously submitted in the draft report DOE/WIPP 88-005, Radionuclide Source Term for the WIPP, dated 1987 (reference 1). The information in this report provides the projected radionuclide inventory at the WIPP based on the projected waste receipts through the year 2013. The information is based on the 1991 TRU Program Data submittals for the Integrated Data Base (DOE/RW-0006, Rev. 7) from each of the DOE sites generating or storing TRU waste for shipment to the WIPP. The data is based on existing characterization data on the waste in interim storage, waste estimates based on projected programs during the 1991 through 2013 time period, projected treatment processes required to meet WIPP Waste Acceptance Criteria (WAC), and a projection of the waste that will be declared low level waste when it is assayed as part of the certification program for waste shipments to WIPP. This data will serve as a standard reference for WIPP programs requiring radionuclide data, including safety programs, performance assessment, and regulatory compliance. These projections will continue to be periodically updated as the waste data estimates are refined by the generator sites as they participate in the annual update of the Integrated Data Base (IDB).

  20. Radiation Safety Work Control Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Radiation Safety Work Control Form (see instructions on pg-3) Rev. May 2014 Area: Form : ... Safety Office (namesignaturedate) Radiation Physics (namesignaturedate) Section 4: ...

  1. Microsoft Word - FORM46002.doc

    Office of Environmental Management (EM)

    ... These standard forms are available at http:www.whitehouse.govombgrantsindex.html. Fillable forms are available at http:grants.pr.doe.gov. IV. CLOSEOUT ...

  2. NDEP Forms | Open Energy Information

    Open Energy Info (EERE)

    to library Legal Document- OtherOther: NDEP FormsLegal Abstract The Nevada Division of Environmental Protection (NDEP) provides links various forms, including all necessary...

  3. Form 200 | Open Energy Information

    Open Energy Info (EERE)

    ApplicationPermit Application: Form 200Legal Abstract Form 200: ApplicationReport for Waste Discharge, current through August 14, 2014. Published NA Year Signed or Took Effect...

  4. Development of a Life Cycle Inventory of Water Consumption Associated with the Production of Transportation Fuels

    SciTech Connect (OSTI)

    Lampert, David J.; Cai, Hao; Wang, Zhichao; Keisman, Jennifer; Wu, May; Han, Jeongwoo; Dunn, Jennifer; Sullivan, John L.; Elgowainy, Amgad; Wang, Michael; Keisman, Jennifer

    2015-10-01

    The production of all forms of energy consumes water. To meet increased energy demands, it is essential to quantify the amount of water consumed in the production of different forms of energy. By analyzing the water consumed in different technologies, it is possible to identify areas for improvement in water conservation and reduce water stress in energy-producing regions. The transportation sector is a major consumer of energy in the United States. Because of the relationships between water and energy, the sustainability of transportation is tied to management of water resources. Assessment of water consumption throughout the life cycle of a fuel is necessary to understand its water resource implications. To perform a comparative life cycle assessment of transportation fuels, it is necessary first to develop an inventory of the water consumed in each process in each production supply chain. The Greenhouse Gases, Regulated Emissions, and Energy Use in Transportation (GREET) model is an analytical tool that can used to estimate the full life-cycle environmental impacts of various transportation fuel pathways from wells to wheels. GREET is currently being expanded to include water consumption as a sustainability metric. The purpose of this report was to document data sources and methodologies to estimate water consumption factors (WCF) for the various transportation fuel pathways in GREET. WCFs reflect the quantity of freshwater directly consumed per unit production for various production processes in GREET. These factors do not include consumption of precipitation or low-quality water (e.g., seawater) and reflect only water that is consumed (i.e., not returned to the source from which it was withdrawn). The data in the report can be combined with GREET to compare the life cycle water consumption for different transportation fuels.

  5. 2004 Toxic Chemical Release Inventory Report for the Emergency Planning and Community Right-to-Know Act of 1986, Title III, Section 313

    SciTech Connect (OSTI)

    M. Stockton

    2006-01-15

    Section 313 of Emergency Planning and Community Right-to-Know Act (EPCRA) specifically requires facilities to submit a Toxic Chemical Release Inventory Report (Form R) to the U.S. Environmental Protection Agency (EPA) and state agencies if the owners and operators manufacture, process, or otherwise use any of the listed toxic chemicals above listed threshold quantities. EPA compiles this data in the Toxic Release Inventory database. Form R reports for each chemical over threshold quantities must be submitted on or before July 1 each year and must cover activities that occurred at the facility during the previous year. For reporting year 2004, Los Alamos National Laboratory (LANL or the Laboratory) submitted Form R reports for lead compounds, nitric acid, and nitrate compounds as required under the EPCRA Section 313. No other EPCRA Section 313 chemicals were used in 2004 above the reportable thresholds. This document provides a description of the evaluation of EPCRA Section 313 chemical use and threshold determinations for LANL for calendar year 2004, as well as background information about data included on the Form R reports.

  6. STEP Utility Data Release Form

    Broader source: Energy.gov [DOE]

    STEP Utility Data Release Form, from the Tool Kit Framework: Small Town University Energy Program (STEP).

  7. EM Rolls Ahead of DOE Goals to Trim Vehicle Fleet Inventory

    Broader source: Energy.gov [DOE]

    WASHINGTON, D.C. – EM exceeded a DOE goal to reduce its vehicle fleet inventory, advancing the Department’s broader initiative to cut greenhouse gas emissions and decrease petroleum consumption across the complex.

  8. Air Emission Inventory for the Idaho National Engineering Laboratory: 1992 emissions report

    SciTech Connect (OSTI)

    Stirrup, T.S.

    1993-06-01

    This report presents the 1992 Air Emission Inventory for the Idaho National Engineering Laboratory. Originally, this report was in response to the Environmental Oversight and Monitoring Agreement in 1989 between the State of Idaho and the Department of Energy Idaho Field Office, and a request from the Idaho Air Quality Bureau. The current purpose of the Air Emission Inventory is to provide the basis for the preparation of the INEL Permit-to-Operate (PTO) an Air Emission Source Application, as required by the recently promulgated Title V regulations of the Clean Air Act. This report includes emissions calculations from 1989 to 1992. The Air Emission Inventory System, an ORACLE-based database system, maintains the emissions inventory.

  9. Numerical research of the optimal control problem in the semi-Markov inventory model

    SciTech Connect (OSTI)

    Gorshenin, Andrey K.

    2015-03-10

    This paper is devoted to the numerical simulation of stochastic system for inventory management products using controlled semi-Markov process. The results of a special software for the systems research and finding the optimal control are presented.

  10. EIS-0347: Long-Term Management of the National Defense Stockpile Inventory of Excess Mercury

    Broader source: Energy.gov [DOE]

    This Defense Logistics Agency EIS evaluated alternatives for managing the Defense National Stockpile Center inventory of excess mercury. DOE was a cooperating agency for preparation of the draft EIS.

  11. Compilation and analyses of emissions inventories for the NOAA atmospheric chemistry project. Progress report, August 1997

    SciTech Connect (OSTI)

    Benkovitz, C.M.

    1997-09-01

    Global inventories of anthropogenic emissions of oxides of nitrogen for circa 1985 and 1990 and non-methane volatile organic compounds (NMVOCs) for circa 1990 have been compiled by this project. Work on the inventories has been carried out under the umbrella of the Global Emissions Inventory Activity of the International Global Atmospheric Chemistry program. Global emissions of NOx for 1985 are estimated to be 21 Tg N/yr, with approximately 84% originating in the Northern Hemisphere. The global emissions for 1990 are 31 Tg N/yr for NOx and 173 Gg NMVOC/yr. Ongoing research activities for this project continue to address emissions of both NOx and NMVOCs. Future tasks include: evaluation of more detailed regional emissions estimates and update of the default 1990 inventories with the appropriate estimates; derivation of quantitative uncertainty estimates for the emission values; and development of emissions estimates for 1995.

  12. COMPILATION AND ANALYSES OF EMISSIONS INVENTORIES FOR THE NOAA ATMOSPHERIC CHEMISTRY PROJECT. PROGRESS REPORT, AUGUST 1997.

    SciTech Connect (OSTI)

    BENKOVITZ,C.M.

    1997-09-01

    Global inventories of anthropogenic emissions of oxides of nitrogen (NO{sub x}) for circa 1985 and 1990 and Non-Methane Volatile Organic Compounds (NMVOCs) for circa 1990 have been compiled by this project. Work on the inventories has been carried out under the umbrella of the Global Emissions Inventory Activity (GEIA) of the International Global Atmospheric Chemistry (IGAC) Program. The 1985 NO{sub x} inventory was compiled using default data sets of global emissions that were refined via the use of more detailed regional data sets; this inventory is being distributed to the scientific community at large as the GEIA Version 1A inventory. Global emissions of NO{sub x} for 1985 are estimated to be 21 Tg N y{sup -1}, with approximately 84% originating in the Northern Hemisphere. The 1990 inventories of NO{sub x} and NMVOCs were compiled using unified methodologies and data sets in collaboration with the Netherlands National Institute of Public Health and Environmental Protection (Rijksinstituut Voor Volksgezondheid en Milieuhygiene, RIVM) and the Division of Technology for Society of the Netherlands Organization for Applied Scientific Research, (IMW-TNO); these emissions will be used as the default estimates to be updated with more accurate regional data. The NMVOC inventory was gridded and speciated into 23 chemical categories. The resulting global emissions for 1990 are 31 Tg N yr{sup -1} for NO{sub x} and 173 Gg NMVOC yr{sup -1}. Emissions of NO{sub x} are highest in the populated and industrialized areas of eastern North America and across Europe, and in biomass burning areas of South America, Africa, and Asia. Emissions of NMVOCs are highest in biomass burning areas of South America, Africa, and Asia. The 1990 NO{sub x} emissions were gridded to 1{sup o} resolution using surrogate data, and were given seasonal, two-vertical-level resolution and speciated into NO and NO{sub 2} based on proportions derived from the 1985 GEIA Version 1B inventory. Global NMVOC

  13. Benefits Forms & Required Notices

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Benefits Forms & Required Notices Benefits Forms & Required Notices A comprehensive benefits package with plan options for health care and retirement to take care of our employees today and tomorrow. Contacts Benefits Office (505) 667-1806 Email Benefits Forms & Required Notices Forms Benefits Enrollment Form, 1751a (pdf) Declaration of Domestic Partnership, 1925a (pdf) Declaration of Legal Ward as Eligible Dependent, 3028 (pdf) Declaration that Enrolled Dependent Meets IRS

  14. Peru`s national greenhouse gas inventory, 1990. Peru climate change country study

    SciTech Connect (OSTI)

    1996-07-01

    The aim of this study has been to determine the Inventory and to propose greenhouse gases mitigation alternatives in order to face the future development of the country in a clean environmental setting, improving in this way the Peruvian standard of life. The main objective of this executive summary is to show concisely the results of the National Inventory about greenhouse gases emitted by Peru in 1990.

  15. The Municipal Solid-State Street Lighting Consortium Public Outdoor Lighting Inventory: Phase I: Survey Results

    SciTech Connect (OSTI)

    Kinzey, Bruce R.; Smalley, Edward; Haefer, R.

    2014-09-30

    This document presents the results of a voluntary web-based inventory survey of public street and area lighting across the U.S. undertaken during the latter half of 2013.This survey attempts to access information about the national inventory in a “bottoms-up” manner, going directly to owners and operators. Adding to previous “top down” estimates, it is intended to improve understanding of the role of public outdoor lighting in national energy use.

  16. DOE Seeking Input on Alternative Uses of Nickel Inventory | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Seeking Input on Alternative Uses of Nickel Inventory DOE Seeking Input on Alternative Uses of Nickel Inventory March 9, 2007 - 10:28am Addthis WASHINGTON, DC - The U.S. Department of Energy (DOE) is seeking input from industry representatives on the safe disposition of approximately 15,300 tons of nickel scrap recovered from uranium enrichment process equipment at the Department's Oak Ridge, TN, and Paducah, KY, facilities. The Expression of Interest (EOI), released today, will

  17. Inventory control program for laboratory equipment written in the C programming language

    SciTech Connect (OSTI)

    Dishman, J.L.; Shipp, S.G.

    1986-10-01

    A property inventory package has been written in the C programming language to keep track of general laboratory equipment. All functions which would be expected for a master inventory database are available including add, delete, edit, and find. The package was developed on a Digital Equipment Corporation LSI 11/73 computer using the ULTRIX-11 operating system, and can be adapted for use on any UNIX based system, or any operating system with a C compiler.

  18. 2014 Review of the Potential Impact of DOE Excess Uranium Inventory On the

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Commercial Markets | Department of Energy 4 Review of the Potential Impact of DOE Excess Uranium Inventory On the Commercial Markets 2014 Review of the Potential Impact of DOE Excess Uranium Inventory On the Commercial Markets Energy Resources International (ERI), Inc conducted this independent market impact analysis on DOE planned uranium sales and transfers during the period 2014 to 2033, based on information concerning quantities and schedules provided to ERI by DOE. ERI Market

  19. Uncertainty assessment and analysis of ITER in-VV tritium inventory determination

    SciTech Connect (OSTI)

    Cristescu, I. R.; Cristescu, I.; Glugla, M.; Murdoch, D.; Ciattaglia, S.

    2008-07-15

    Tracking of tritium inventories on ITER will be essential to ensure that the safety limits established for the mobilizable tritium inventory in the vacuum vessel are not violated. Tritium will be delivered to the ITER site from outside suppliers. Staring with the tritium imports the value of tritium inventory at ITER site will be known with a certain error that will propagate in time. During plasma operation, shot by shot measurements of the tritium delivered to the Torus and recovered will allow the amount of tritium trapped in the Torus to be computed at the end of the day. A case study for different measuring techniques and several measuring points for the tritium recovered from Torus have been done. An alternative method is to measure overnight the variation in the inventory of the storage and delivery system and the associated error when this method will be employed are presented. In order to reduce the errors on the tritium trapped in-vessel, at certain time intervals a method of global tritium inventory will be performed. The method envisages the transfer of all the mobilizable tritium from the plant and measurement of this inventory in the self-assay beds from the storage and delivery system. Evaluation of the most important sources of error for the tritium trapped in-vessel and means of minimization are eventually presented. (authors)

  20. A hybrid inventory management system respondingto regular demand and surge demand

    SciTech Connect (OSTI)

    Mohammad S. Roni; Mingzhou Jin; Sandra D. Eksioglu

    2014-06-01

    This paper proposes a hybrid policy for a stochastic inventory system facing regular demand and surge demand. The combination of two different demand patterns can be observed in many areas, such as healthcare inventory and humanitarian supply chain management. The surge demand has a lower arrival rate but higher demand volume per arrival. The solution approach proposed in this paper incorporates the level crossing method and mixed integer programming technique to optimize the hybrid inventory policy with both regular orders and emergency orders. The level crossing method is applied to obtain the equilibrium distributions of inventory levels under a given policy. The model is further transformed into a mixed integer program to identify an optimal hybrid policy. A sensitivity analysis is conducted to investigate the impact of parameters on the optimal inventory policy and minimum cost. Numerical results clearly show the benefit of using the proposed hybrid inventory model. The model and solution approach could help healthcare providers or humanitarian logistics providers in managing their emergency supplies in responding to surge demands.

  1. Special waste-form lysimeters - arid: 1984--1992 data summary and preliminary interpretation

    SciTech Connect (OSTI)

    Jones, T.L.; Serne, R.J.

    1994-10-01

    A lysimeter facility constructed at the Hanford Site in south-central Washington State has been used since 1984 to monitor the leaching of buried waste forms under natural conditions. The facility is generating data that are useful in evaluating source-term models used in radioactive waste transport analyses. The facility includes ten bare-soil lysimeters (183 cm diameter by 305 cm depth) containing buried waste forms generated at nuclear reactors in the United States and solidified with Portland M cement, masonry cement, bitumen, and vinyl-ester styrene. The waste forms contained in the lysimeters have been leached under natural, semiarid conditions. In spite of the semiarid conditions, from 1984 through 1992, an average of 45 cm of water leached through the lysimeters, representing 27% of area precipitation. Leachate samples have been routinely collected and analyzed for radionuclide and chemical content. To date, tritium, cobalt-60, and cesium-137 have been identified in the lysimeter leachate samples. From 1984 through 1992, over 4000 {mu}Ci of tritium, representing 76 and 71 % of inventory (not decay corrected), have been leached from the two waste forms containing tritium. Cobalt-60 has been found in the leachate from all six of the waste forms that originally contained > 1 mCi of inventory. The leached amounts of cobalt-60 represent < 0.1 % of original cobalt inventories. Mobile cobalt is believed to be chelated with organic compounds, such as ethylenediaminetetraacetic acid (EDTA), that are present in the waste. Trace amounts of cesium-137 have occasionally been identified in leachate from two waste forms since 1991. Qualitatively, the field leaching results confirm laboratory studies suggesting that tritium is readily leached from cement, and that cobalt-60 is generally leached more easily from cement than from vinyl-ester styrene.

  2. ESA Forms | Open Energy Information

    Open Energy Info (EERE)

    navigation, search OpenEI Reference LibraryAdd to library Web Site: ESA Forms Abstract Fish and Wildlife Service Fish and Wildlife Permit Application Forms Author U.S. Fish and...

  3. Fermilab | Tevatron | Guest Book | Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Guest Book - Form Share your Tevatron-related memories, comments and stories by using our submission form below: Submitted comments are restricted to 200 words and comments will be...

  4. Fire Protection Account Request Form

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Fire Protection System Account Request Form To obtain a user id and password to access the Fire Protection system, please complete the form, save the file and email it to...

  5. Paperclips Etc. Special Order Form

    Broader source: Energy.gov (indexed) [DOE]

    PSS-02.2 (March 7, 2011) Replaces PSS-02.1 PAPERCLIPS Etc. SPECIAL Orders Form This form is used to order supplies that are not readily available in the DOE HQ self-service supply...

  6. HHS SMALL BUSINESS REVIEW FORM

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE Form 4220.2 (Revised March 14 2013) Office of Small and Disadvantaged Business Utilization DOE F 4220.2 - Small Business Review Form (03142013) OSDBU Control Number: ...

  7. CSLB Forms | Open Energy Information

    Open Energy Info (EERE)

    Forms Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: CSLB FormsLegal Abstract The Colorado State Land Board (CSLB) provides various...

  8. ADOT Forms | Open Energy Information

    Open Energy Info (EERE)

    Forms Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: ADOT FormsLegal Abstract The Arizona Department of Transportation provides...

  9. NDSL Forms | Open Energy Information

    Open Energy Info (EERE)

    NDSL Forms Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: NDSL FormsLegal Abstract The Nevada Division of State Lands provides...

  10. CSLC Forms | Open Energy Information

    Open Energy Info (EERE)

    Forms Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: CSLC FormsLegal Abstract The California State Lands Commission (CSLC) provides...

  11. WSDNR Forms | Open Energy Information

    Open Energy Info (EERE)

    Forms Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: WSDNR FormsLegal Abstract The Washington State Department of Natural Resources...

  12. SSRL Computer Account Request Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SSRL/LCLS Computer Account Request Form August 2009 Fill in this form and sign the security statement mentioned at the bottom of this page to obtain an account. Your Name: __________________________________________________________ Institution: ___________________________________________________________ Mailing Address: ______________________________________________________ Email Address: _______________________________________________________ Telephone:

  13. Document Certification and Transmittal Form

    Broader source: Energy.gov [DOE]

    Use this form to submit a NEPA document to the Office of NEPA Policy and Compliance for website posting.

  14. Prioritization Tool Measurement Input Form

    Office of Energy Efficiency and Renewable Energy (EERE)

    BTO encourages stakeholders to recommend updates and improvements to the Prioritization Tool by using the below Measure Input Form.

  15. Benefit Forms | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    New Employee Orientation » Benefit Forms Benefit Forms The employment and benefits forms that you will be asked to complete as part of this orientation program can be numerous. Each, however, serves an important purpose in ensuring proper recording of your employment and benefit elections. This online program is designed to make the task a little easier. Each set of forms that you will work with has been compiled to ensure that you are only completing the essential documentation for your

  16. Hawaii Well Abandonment Report Form (DLNR Form WAR) | Open Energy...

    Open Energy Info (EERE)

    Notice Form Topic Well Abandonment Report Organization State of Hawaii Commission on Water Resource Management Published Publisher Not Provided, 012008 DOI Not Provided Check...

  17. Forms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    completed 20 or more years of Reserve or National Guard service but will not receive a pension until age 60.) SF-181 Ethnicity and Race Identification Ethnicity and Race...

  18. Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    must exist at the time the request is submitted. Orga nizati Pillsbury Winthrop Shaw Pi on Mailin g 909 Fannin Suite 2000 Addre 55 City Houston Enter description: 1. All...

  19. Sediment studies at Bikini Atoll part 2. inventories of transuranium elements in surface sediments

    SciTech Connect (OSTI)

    Noshkin, V.E.; Eagle, R.J.; Wong, K.M.; Robison, W.L.

    1997-10-01

    This is the second of three reports on Bikini sediment studies, which discusses the concentrations and inventories of {sup 241}Am and {sup 239+240}Pu in sediments from the lagoon. Surface sediment samples were collected from 87 locations over the entire lagoon at Bikini Atoll during 1979. The collections were made to map the distribution of long-lived radionuclides associated with the bottom material and to show what modifications occurred in the composition of the sediment as a result of the testing program. Present inventories for {sup 241}Am and {sup 239+240}Pu in the surface 2 cm of sediment are estimated to be 14 and 17 TBq, respectively. These values are estimated to represent only 14% of the total inventory in the sediment column. Sediment inventories of {sup 239+240}Pu and {sup 241}Am are changing only slowly with time through chemical- physical processes that continuously mobilize small amounts of the transuranics to the water column. The lowest concentrations and inventories are associated with deposits logoonward of the eastern reef.

  20. US Department of Energy`s weapons complex scrap metal inventory. Research report

    SciTech Connect (OSTI)

    Duda, J.R.

    1993-07-01

    Two tasks comprise the thrust of this contracted effort. Task 1 is the development of a Source List and is based on determining a list of public documents pertaining to contaminated/uncontaminated scrap metals, equipment, and other materials of value, were they not contaminated or could they be decontaminated. Task 2 is to develop an inventory of such materials from the Task 1 list of public documentation. In more detail, the Task 2 Inventory Report is based upon fulfillment of the following requirement to prepare and submit an Inventory Report based on the information obtained in the Source List. The Inventory Report shall define the type, quantity, and location of used equipment, scrap metal, and other materials existing within DOE`s system. The Inventory Report shall list: the site where the equipment, scrap metal, or other material resides; the type and size of equipment; the type and volume and/or weight of scrap metal or other material; its source; the type and level of contamination; its accessibility; the current annual rate of generation; and the projected annual rate of generation of the material.

  1. 2002 Toxic Chemical Release Inventory Report for the Emergency Planning and Community Right-to-Know Act of 1986, Title III, Section 313

    SciTech Connect (OSTI)

    M. Stockton

    2003-11-01

    For reporting year 2002, Los Alamos National Laboratory (LANL or the Laboratory) submitted Form R reports for lead compounds and mercury as required under the Emergency Planning and Community Right-to-Know Act (EPCRA), Section 313. No other EPCRA Section 313 chemicals were used in 2002 above the reportable thresholds. This document was prepared to provide a description of the evaluation of EPCRA Section 313 chemical usage and threshold determinations for LANL for calendar year 2002 as well as provide background information about the data included on the Form R reports. Section 313 of EPCRA specifically requires facilities to submit a Toxic Chemical Release Inventory report (Form R) to the U.S. Environmental Protection Agency (EPA) and state agencies if the owners and operators manufacture, process, or otherwise use any of the listed toxic chemicals above listed threshold quantities. EPA compiles this data in the Toxic Release Inventory database. Form R reports for each chemical over threshold quantities must be submitted on or before July 1 each year and must cover activities that occurred at the facility during the previous year. In 1999 EPA promulgated a final rule on Persistent Bioaccumulative Toxics (PBTs). This rule added several chemicals to the EPCRA Section 313 list of toxic chemicals and established lower reporting thresholds for these and other PBT chemicals that were already reportable under EPCRA Section 313. These lower thresholds became applicable in reporting year 2000. In 2001, EPA expanded the PBT rule to include a lower reporting threshold for lead and lead compounds. Facilities that manufacture, process, or otherwise use more than 100 lb of lead or lead compounds must submit a Form R.

  2. 2006 Toxic Chemical Release Inventory Report for the Emergency Planning and Community Right-to-Know Act of 1986, Title III, Section 313

    SciTech Connect (OSTI)

    Ecology and Air Quality Group

    2007-12-12

    For reporting year 2006, Los Alamos National Laboratory (LANL or the Laboratory) submitted Form R reports for lead as required under the Emergency Planning and Community Right-to-Know Act (EPCRA) Section 313. No other EPCRA Section 313 chemicals were used in 2006 above the reportable thresholds. This document was prepared to provide a description of the evaluation of EPCRA Section 313 chemical use and threshold determinations for LANL for calendar year 2006, as well as to provide background information about data included on the Form R reports. Section 313 of EPCRA specifically requires facilities to submit a Toxic Chemical Release Inventory Report (Form R) to the U.S. Environmental Protection Agency (EPA) and state agencies if the owners and operators manufacture, process, or otherwise use any of the listed toxic chemicals above listed threshold quantities. EPA compiles this data in the Toxic Release Inventory database. Form R reports for each chemical over threshold quantities must be submitted on or before July 1 each year and must cover activities that occurred at the facility during the previous year. In 1999, EPA promulgated a final rule on persistent bioaccumulative toxics (PBTs). This rule added several chemicals to the EPCRA Section 313 list of toxic chemicals and established lower reporting thresholds for these and other PBT chemicals that were already reportable. These lower thresholds became applicable in reporting year 2000. In 2001, EPA expanded the PBT rule to include a lower reporting threshold for lead and lead compounds. Facilities that manufacture, process, or otherwise use more than 100 lb of lead or lead compounds must submit a Form R.

  3. Electronic Registration Form - Hanford Site

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    About Us Hanford Site Wide Programs Health & Safety Exposition Electronic Registration Form About Us Hanford Cultural Resources Charging Your Time Committee Members Contact Us Electronic Registration Form Exhibitor and Vendor Information EXPO 2016 Sponsors EXPO Award Criteria How to Get to TRAC Special Events What is EXPO Why Should I Participate in EXPO Electronic Registration Form Email Email Page | Print Print Page | Text Increase Font Size Decrease Font Size * Fields marked with an

  4. Complaint Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Complaint Form Complaint Form The Office of Inspector General (OIG) maintains a Hotline to facilitate the reporting of allegations of fraud, waste, abuse, or mismanagement in U.S. Department of Energy (DOE) programs or operations. To submit an allegation to the OIG, complete the form below. Acknowledgement * I acknowledge that I have read the Office of Inspector General Hotline section of the OIG website regarding issues which should be reported to the OIG, complaint processing, anonymity and

  5. Seal for fluid forming tools

    DOE Patents [OSTI]

    Golovashchenko, Sergey Fedorovich; Bonnen, John Joseph Francis

    2012-03-20

    An electro-hydraulic forming tool for forming a sheet metal blank in a one-sided die has first and second rigid rings that engage opposite sides of a sheet metal blank. The rigid rings are contained within slots on a die portion and a hydraulic force applicator portion of the forming tool. The seals are either resiliently biased by an elastomeric member or inherently resiliently biased into contact with the blank.

  6. System for forming janus particles

    DOE Patents [OSTI]

    Hong, Liang; Jiang, Shan; Granick, Steve

    2011-01-25

    The invention is a method of forming Janus particles, that includes forming an emulsion that contains initial particles, a first liquid, and a second liquid; solidifying the first liquid to form a solid that contains at least a portion of the initial particles on a surface of the solid; and treating the exposed particle sides with a first surface modifying agent, to form the Janus particles. Each of the initial particles on the surface has an exposed particle side and a blocked particle side.

  7. SNL Information Repository subscription form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2015 SANDIA NATIONAL LABORATORIES HAZARDOUS WASTE INFORMATION REPOSITORY INDEX Subscription form for hard copy notices of updates Name: Address: City: State: Zip: Please check each...

  8. Department management of the Ross Aviation, Inc. , contract aircraft major spare parts inventory, Albuquerque, New Mexico

    SciTech Connect (OSTI)

    Not Available

    1991-07-26

    The purpose of this audit was to determine whether the Department of Energy's (Department) management of its contract with Ross Aviation, Inc. (Ross) provided reasonable assurance that the inventory of aircraft major spare parts at Ross was economical and efficient. The audit disclosed that approximately $447,000 (acquisition and interest carrying costs) of low-use major spare parts was excessive. Internal control deficiencies which fostered the excessive inventory included: (1) Ross had set stock levels without considering such factors as consumption or projected needs; and (2) the Department had not reviewed inventory quantities when appraising Ross' property management. The Albuquerque Operations Office (AL) agreed to take the corrective actions recommended in the report.

  9. Radionuclide inventories for short run-time space nuclear reactor systems

    SciTech Connect (OSTI)

    Coats, R.L.

    1992-10-22

    Space Nuclear Reactor Systems, especially those used for propulsion, often have expected operation run times much shorter than those for land-based nuclear power plants. This produces substantially different radionuclide inventories to be considered in the safety analyses of space nuclear systems. This presentation describes an analysis utilizing ORIGEN2 and DKPOWER to provide comparisons among representative land-based and space systems. These comparisons enable early, conceptual considerations of safety issues and features in the preliminary design phases of operational systems, test facilities, and operations by identifying differences between the requirements for space systems and the established practice for land-based power systems. Early indications are that separation distance is much more effective as a safety measure for space nuclear systems than for power reactors because greater decay of the radionuclide activity occurs during the time to transport the inventory a given distance. In addition, the inventories of long-lived actinides are very low for space reactor systems.

  10. An SAR-compliant radionuclide inventory management system for a DOE research and development laboratory

    SciTech Connect (OSTI)

    O'Kula, K.R.; Lux, C.R.; Clements, J.A.

    2000-07-01

    The US Department of Energy Complex contains many laboratories that require inventory management and control of large stores of radionuclides. While the overall quantities of radionuclides are bounded by Authorization-Basis (AB) documents, the spatial distribution may change rapidly according to facility experimentation and storage limits. Thus, the consequences of postulated accident events may be difficult to quantify as the location of radiological species becomes uncertain. Furthermore, a situation of this nature may be compounded by management of fissile materials in the same laboratory. Although radionuclide inventory management, fissile material control, and compliance with AB limits may be handled individually, a systematic and consistent approach would be to integrate all three functions. A system with these characteristics, an upgraded Radionuclide Inventory and Administrative Control (RI-AC) System, has been implemented for the Savannah River Technology Center (SRTC) located on the Savannah River Site (SRS), and is summarized in this paper.

  11. Technology Transfer Reporting Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Transfer Reporting Form Technology Transfer Reporting Form PDF icon Technology Transfer Reporting Form More Documents & Publications Technology Partnership Ombudsman - Roles,...

  12. Environmental Protection Department`s well inventory (through the fourth quarter of 1991)

    SciTech Connect (OSTI)

    Not Available

    1992-03-01

    This report is an inventory of the wells recorded in Environmental Protection Department/Environmental Monitoring Section (EPD/EMS) documents since the startup of the Savannah River Site (SRS) and includes wells monitored by special request and SRS research wells. Wells listed in this inventory are monitoring wells unless otherwise indicated. The purpose of this report is as follows: to provide a historical record of the wells that EPD/EMS has monitored; to provide a document containing a list of wells that are currently in the EPD/EMS Groundwater Monitoring Program, and to provide pertinent information about all wells listed in EPD/EMS documents.

  13. Environmental Protection Department`s well inventory (through the second quarter of 1991)

    SciTech Connect (OSTI)

    Rogers, C.D.

    1991-10-01

    This report is an inventory of the wells contained in Environmental Protection Department/Environmental Monitoring Section (EPD/EMS) documents since the startup of the Savannah River Site (SRS) and includes wells monitored by special request and SRS research wells. Wells listed in this inventory are monitoring wells unless otherwise indicated. The purpose of this report is as follows: To provide a historical record of the wells that EPD/EMS has monitored; to provide a document containing a list of wells that are currently in the EPD/EMS Groundwater Monitoring Program; and to provide pertinent information about all wells listed in EPD/EMS documents.

  14. Environmental Protection Department's well inventory (through the fourth quarter of 1991)

    SciTech Connect (OSTI)

    Not Available

    1992-03-01

    This report is an inventory of the wells recorded in Environmental Protection Department/Environmental Monitoring Section (EPD/EMS) documents since the startup of the Savannah River Site (SRS) and includes wells monitored by special request and SRS research wells. Wells listed in this inventory are monitoring wells unless otherwise indicated. The purpose of this report is as follows: to provide a historical record of the wells that EPD/EMS has monitored; to provide a document containing a list of wells that are currently in the EPD/EMS Groundwater Monitoring Program, and to provide pertinent information about all wells listed in EPD/EMS documents.

  15. Environmental Protection Department's well inventory (through the second quarter of 1991)

    SciTech Connect (OSTI)

    Rogers, C.D. )

    1991-10-01

    This report is an inventory of the wells contained in Environmental Protection Department/Environmental Monitoring Section (EPD/EMS) documents since the startup of the Savannah River Site (SRS) and includes wells monitored by special request and SRS research wells. Wells listed in this inventory are monitoring wells unless otherwise indicated. The purpose of this report is as follows: To provide a historical record of the wells that EPD/EMS has monitored; to provide a document containing a list of wells that are currently in the EPD/EMS Groundwater Monitoring Program; and to provide pertinent information about all wells listed in EPD/EMS documents.

  16. Integrated data base report--1995: US spent nuclear fuel and radioactive waste inventories, projections, and characteristics

    SciTech Connect (OSTI)

    1996-12-01

    The information in this report summarizes the U.S. Department of Energy (DOE) data base for inventories, projections, and characteristics of domestic spent nuclear fuel and radioactive waste. This report is updated annually to keep abreast of continual waste inventory and projection changes in both the government and commercial sectors. Baseline information is provided for DOE program planning purposes and to support DOE program decisions. Although the primary purpose of this document is to provide background information for program planning within the DOE community, it has also been found useful by state and local governments, the academic community, and some private citizens.

  17. DETERMINATION OF THE DISTRIBUTION AND INVENTORY OF RADIONUCLIDES WITHIN A SAVANNAH RIVER SITE WATERWAY

    SciTech Connect (OSTI)

    Hiergesell, R.; Phifer, M.

    2012-11-09

    An investigation was conducted to evaluate the radionuclide inventory within the Lower Three Runs (LTR) Integrator Operable Unit (IOU) at the U.S. Department of Energy’s (DOE’s) Savannah River Site (SRS). The scope of this effort included the analysis of previously existing sampling and analysis data as well as additional streambed and floodplain sampling and analysis data acquired to delineate horizontal and vertical distributions of the radionuclide as part of the ongoing SRS environmental restoration program, and specifically for the LTR IOU program. While cesium-137 (Cs-137) is the most significant and abundant radionuclide associated with the LTR IOU it is not the only radionuclide, hence the scope included evaluating all radionuclides present and includes an evaluation of inventory uncertainty for use in sensitivity and uncertainty analyses. The scope involved evaluation of the radionuclide inventory in the P-Reactor and RReactor cooling water effluent canal systems, PAR Pond (including Pond C) and the floodplain and stream sediment sections of LTR between the PAR Pond Dam and the Savannah River. The approach taken was to examine all of the available Sediment and Sediment/Soil analysis data available along the P- and R-Reactor cooling water re-circulation canal system, the ponds situated along those canal reaches and along the length of LTR below Par Pond dam. By breaking the IOU into a series of sub-components and sub-sections, the mass of contaminated material was estimated and a representative central concentration of each radionuclide was computed for each compartment. The radionuclide inventory associated with each sub-compartment was then aggregated to determine the total radionuclide inventory that represented the full LTR IOU. Of special interest was the inventory of Cs-137 due to its role in contributing to the potential dose to an offsite member of the public. The overall LTR IOU inventory of Cs-137 was determined to be 75.5 Ci, which is similar

  18. Inventory of Carbon Dioxide (CO2) Emissions at Pacific Northwest National Laboratory

    SciTech Connect (OSTI)

    Judd, Kathleen S.; Kora, Angela R.; Shankle, Steve A.; Fowler, Kimberly M.

    2009-06-29

    The Carbon Management Strategic Initiative (CMSI) is a lab-wide initiative to position the Pacific Northwest National Laboratory (PNNL) as a leader in science, technology and policy analysis required to understand, mitigate and adapt to global climate change as a nation. As part of an effort to walk the talk in the field of carbon management, PNNL conducted its first carbon dioxide (CO2) emissions inventory for the 2007 calendar year. The goal of this preliminary inventory is to provide PNNL staff and management with a sense for the relative impact different activities at PNNL have on the labs total carbon footprint.

  19. Determination of the Distribution and Inventory of Radionuclides within a Savannah River Site Waterway - 13202

    SciTech Connect (OSTI)

    Hiergesell, R.A.; Phifer, M.A.

    2013-07-01

    An investigation was conducted to evaluate the radionuclide inventory within the Lower Three Runs (LTR) Integrator Operable Unit (IOU) at the U.S. Department of Energy's (DOE's) Savannah River Site (SRS). The scope of this effort included the analysis of previously existing sampling and analysis data as well as additional stream bed and flood plain sampling and analysis data acquired to delineate horizontal and vertical distributions of the radionuclide as part of the ongoing SRS environmental restoration program, and specifically for the LTR IOU program. While cesium-137 (Cs-137) is the most significant and abundant radionuclide associated with the LTR IOU it is not the only radionuclide, hence the scope included evaluating all radionuclides present and includes an evaluation of inventory uncertainty for use in sensitivity and uncertainty analyses. The scope involved evaluation of the radionuclide inventory in the P-Reactor and R-Reactor cooling water effluent canal systems, PAR Pond (including Pond C) and the flood plain and stream sediment sections of LTR between the PAR Pond Dam and the Savannah River. The approach taken was to examine all of the available Sediment and Sediment/Soil analysis data available along the P- and R-Reactor cooling water re-circulation canal system, the ponds situated along those canal reaches and along the length of LTR below Par Pond dam. By breaking the IOU into a series of sub-components and sub-sections, the mass of contaminated material was estimated and a representative central concentration of each radionuclide was computed for each compartment. The radionuclide inventory associated with each sub-compartment was then aggregated to determine the total radionuclide inventory that represented the full LTR IOU. Of special interest was the inventory of Cs-137 due to its role in contributing to the potential dose to an offsite member of the public. The overall LTR IOU inventory of Cs-137 was determined to be 2.87 E+02 GBq, which is

  20. Method of forming ceramic bricks

    DOE Patents [OSTI]

    Poeppel, Roger B. (Glen Ellyn, IL); Claar, Terry D. (Newark, DE); Silkowski, Peter (Urbana, IL)

    1988-01-01

    A method for forming free standing ceramic bricks for use as tritium breeder material is disclosed. Aqueous solutions of sodium carbonate and potassium carbonate are mixed with an organic hydrocolloid dispersion and powdered lithium carbonate, spray dried, and ceramic bricks formed by molding in a die and firing.

  1. Method of forming ceramic bricks

    DOE Patents [OSTI]

    Poeppel, Roger B.; Claar, Terry D.; Silkowski, Peter

    1988-09-06

    A method for forming free standing ceramic bricks for use as tritium breeder material is disclosed. Aqueous solutions of sodium carbonate and potassium carbonate are mixed with an organic hydrocolloid dispersion and powdered lithium carbonate, spray dried, and ceramic bricks formed by molding in a die and firing.

  2. Method of forming ceramic bricks

    DOE Patents [OSTI]

    Poeppel, R.B.; Claar, T.D.; Silkowski, P.

    1987-04-22

    A method for forming free standing ceramic bricks for use as tritium breeder material is disclosed. Aqueous solutions of sodium carbonate and potassium carbonate are mixed with an organic hydrocolloid dispersion and powdered lithium carbonate, spray dried, and ceramic bricks formed by molding in a die and firing.

  3. Oregon Modification Application Geothermal Wells Form | Open...

    Open Energy Info (EERE)

    Modification Application Geothermal Wells Form Jump to: navigation, search OpenEI Reference LibraryAdd to library Form: Oregon Modification Application Geothermal Wells Form Form...

  4. TEPP - Exercise Evaluation Forms | Department of Energy

    Office of Environmental Management (EM)

    TEPP - Exercise Evaluation Forms TEPP - Exercise Evaluation Forms Hazardous Materials Exercise Evaluation Forms PDF icon Exercise Evaluation Forms More Documents & Publications...

  5. RADIONUCLIDE INVENTORY AND DISTRIBUTION: FOURMILE BRANCH, PEN BRANCH, AND STEEL CREEK IOUS

    SciTech Connect (OSTI)

    Hiergesell, R.; Phifer, M.

    2014-04-29

    As a condition to the Department of Energy (DOE) Low Level Waste Disposal Federal Facility Review Group (LFRG) review team approving the Savannah River Site (SRS) Composite Analysis (CA), SRS agreed to follow up on a secondary issue, which consisted of the consolidation of several observations that the team concluded, when evaluated collectively, could potentially impact the integration of the CA results. This report addresses secondary issue observations 4 and 21, which identify the need to improve the CA sensitivity and uncertainty analysis specifically by improving the CA inventory and the estimate of its uncertainty. The purpose of the work described herein was to be responsive to these secondary issue observations by re-examining the radionuclide inventories of the Integrator Operable Units (IOUs), as documented in ERD 2001 and Hiergesell, et. al. 2008. The LFRG concern has been partially addressed already for the Lower Three Runs (LTR) IOU (Hiergesell and Phifer, 2012). The work described in this investigation is a continuation of the effort to address the LFRG concerns by re-examining the radionuclide inventories associated with Fourmile Branch (FMB) IOU, Pen Branch (PB) IOU and Steel Creek (SC) IOU. The overall approach to computing radionuclide inventories for each of the IOUs involved the following components: Defining contaminated reaches of sediments along the IOU waterways Identifying separate segments within each IOU waterway to evaluate individually Computing the volume and mass of contaminated soil associated with each segment, or compartment Obtaining the available and appropriate Sediment and Sediment/Soil analytical results associated with each IOU Standardizing all radionuclide activity by decay-correcting all sample analytical results from sample date to the current point in time, Computing representative concentrations for all radionuclides associated with each compartment in each of the IOUs Computing the radionuclide

  6. Proposed research and development plan for mixed low-level waste forms

    SciTech Connect (OSTI)

    O`Holleran, T.O.; Feng, X.; Kalb, P.

    1996-12-01

    The objective of this report is to recommend a waste form program plan that addresses waste form issues for mixed low-level waste (MLLW). The report compares the suitability of proposed waste forms for immobilizing MLLW in preparation for permanent near-surface disposal and relates them to their impact on the U.S. Department of Energy`s mixed waste mission. Waste forms are classified into four categories: high-temperature waste forms, hydraulic cements, encapsulants, and specialty waste forms. Waste forms are evaluated concerning their ability to immobilize MLLW under certain test conditions established by regulatory agencies and research institutions. The tests focused mainly on leach rate and compressive strength. Results indicate that all of the waste forms considered can be tailored to give satisfactory performance immobilizing large fractions of the Department`s MLLW inventory. Final waste form selection will ultimately be determined by the interaction of other, often nontechnical factors, such as economics and politics. As a result of this report, three top-level programmatic needs have been identified: (1) a basic set of requirements for waste package performance and disposal; (2) standardized tests for determining waste form performance and suitability for disposal; and (3) engineering experience operating production-scale treatment and disposal systems for MLLW.

  7. Process to form mesostructured films

    DOE Patents [OSTI]

    Brinker, C. Jeffrey; Anderson, Mark T.; Ganguli, Rahul; Lu, Yunfeng

    1999-01-01

    This invention comprises a method to form a family of supported films film with pore size in the approximate range 0.8-20 nm exhibiting highly ordered microstructures and porosity derived from an ordered micellar or liquid-crystalline organic-inorganic precursor structure that forms during film deposition. Optically transparent, 100-500-nm thick films exhibiting a unique range of microstructures and uni-modal pore sizes are formed in seconds in a continuous coating operation. Applications of these films include sensors, membranes, low dielectric constant interlayers, anti-reflective coatings, and optical hosts.

  8. Process to form mesostructured films

    DOE Patents [OSTI]

    Brinker, C.J.; Anderson, M.T.; Ganguli, R.; Lu, Y.F.

    1999-01-12

    This invention comprises a method to form a family of supported films with pore size in the approximate range 0.8-20 nm exhibiting highly ordered microstructures and porosity derived from an ordered micellar or liquid-crystalline organic-inorganic precursor structure that forms during film deposition. Optically transparent, 100-500-nm thick films exhibiting a unique range of microstructures and uni-modal pore sizes are formed in seconds in a continuous coating operation. Applications of these films include sensors, membranes, low dielectric constant interlayers, anti-reflective coatings, and optical hosts. 12 figs.

  9. Compilation and analyses of emissions inventories for NOAA`s atmospheric chemistry project. Progress report, August 1997

    SciTech Connect (OSTI)

    Benkovitz, C.M.; Mubaraki, M.A.

    1997-09-01

    Global inventories of anthropogenic emissions of oxides of nitrogen (NO{sub x}) for circa 1985 and 1990 and Non-Methane Volatile Organic Compounds (NMVOCs) for circa 1990 have been compiled by this project. Work on the inventories has been carried out under the umbrella of the Global Emissions Inventory Activity (GEIA) of the International Global Atmospheric Chemistry (IGAC) Program. The 1985 NO{sub x} inventory was compiled using default data sets of global emissions that were refined via the use of more detailed regional data sets; this inventory is being distributed to the scientific community at large as the GEIA Version 1A inventory. Global emissions of NO{sub x} for 1985 are estimated to be 21 Tg N y{sup -1}, with approximately 84% originating in the Northern Hemisphere. The 1990 inventories of NO{sub x} and NMVOCs were compiled using unified methodologies and data sets in collaboration with the Netherlands National Institute of Public Health and Environmental Protection (Rijksinstituut Voor Volksgezondheid en Milieuhygiene, RIVM) and the Division of Technology for Society of the Netherlands Organization for Applied Scientific Research, (IMW-TNO); these emissions will be used as the default estimates to be updated with more accurate regional data. The NMVOC inventory was gridded and speciated into 23 chemical categories.

  10. Estimation of SX Farm Vadose Zone CS-137 Inventories from Geostatistical Analysis of Drywell and Soil Core Data

    SciTech Connect (OSTI)

    KNEPP, A.J.

    2000-06-02

    This report provides an estimation of the Cs-137 inventories in the soil under the SX Tank Farm based on measurements obtained from drywell and soil cores. The Cs-137 inventories are estimated separately for distinct volumes of soil associated etc.

  11. Greater Than Class C Tracking, Inventory and Projections System

    Energy Science and Technology Software Center (OSTI)

    1993-06-28

    The GTIPS was developed as part of the National Low-Level Waste Management Program''s effort to characterize GTCC waste. The primary purpose of this system is to store the Energy Information Administration''s (EIA) 1985 survey information (as well as future surveys by the program) in a central location; retrieve data with specific attributes or logical combinations of attributes; generate output in a textual or tabular form to aid in the preparation of reports and other documentsmore » required by the user; project a trend of disposal GTCC volumes and activities into the future to aid the user in decision making for the storage and disposal of GTCC waste.« less

  12. FermiCulture Subscription Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    This is a private, announcement-only mail list and will never be used for spamming or discussions. Subscribers receive approximately five emails per month. Use the form below to ...

  13. EIA-412 Form and Instructions

    Gasoline and Diesel Fuel Update (EIA)

    METHOD OF FILING RESPONSE Submit your data electronically over the Internet using our web-based form. Log on to https:elecidc.eia.doe.gov Web-based Survey Information EIA uses ...

  14. FAQs for Survey Forms 914

    Gasoline and Diesel Fuel Update (EIA)

    ... May the oil or gas volumes be submitted separately? Where are oil sales submitted (web or ... If you're using the web form there are comments you can select from the drop down list or ...

  15. NMOSE Forms | Open Energy Information

    Open Energy Info (EERE)

    library Legal Document- Permit ApplicationPermit Application: NMOSE FormsLegal Published NA Year Signed or Took Effect 2012 Legal Citation Not provided DOI Not Provided Check for...

  16. HHS SMALL BUSINESS REVIEW FORM

    Office of Environmental Management (EM)

    ... If necessary, the SBA PCR will initiate an appeal process (SBA Standard Form-70) and forward supporting documentation to the CO. 16. The DOE OSDBU shall review, sign & date this ...

  17. Triggered pore-forming agents

    DOE Patents [OSTI]

    Bayley, Hagan; Walker, Barbara J.; Chang, Chung-yu; Niblack, Brett; Panchal, Rekha

    1998-01-01

    An inactive pore-forming agent which is activated to lytic function by a condition such as pH, light, heat, reducing potential, or metal ion concentration, or substance such as a protease, at the surface of a cell.

  18. Process for forming planarized films

    DOE Patents [OSTI]

    Pang, Stella W.; Horn, Mark W.

    1991-01-01

    A planarization process and apparatus which employs plasma-enhanced chemical vapor deposition (PECVD) to form plarnarization films of dielectric or conductive carbonaceous material on step-like substrates.

  19. Mixed Waste Management Facility (MWMF) Old Burial Ground (OBG) source control technology and inventory study

    SciTech Connect (OSTI)

    Flach, G.P.; Rehder, T.E.; Kanzleiter, J.P.

    1996-10-02

    This report has been developed to support information needs for wastes buried in the Burial Ground Complex. Information discussed is presented in a total of four individual attachments. The general focus of this report is to collect information on estimated source inventories, leaching studies, source control technologies, and to provide information on modeling parameters and associated data deficiencies.

  20. Categorization of Used Nuclear Fuel Inventory in Support of a Comprehensive National Nuclear Fuel Cycle Strategy

    Broader source: Energy.gov [DOE]

    The Office of Nuclear Energy has conducted a technical review and assessment of the total current inventory [~70,150 MTHM as of 2011] of domestic discharged used nuclear fuel (UNF) and estimated an amount to be considered for retention in support of research, development, demonstration, and national security interests.

  1. Integrated data base report--1996: US spent nuclear fuel and radioactive waste inventories, projections, and characteristics

    SciTech Connect (OSTI)

    1997-12-01

    The Integrated Data Base Program has compiled historic data on inventories and characteristics of both commercial and U.S. Department of Energy (DOE) spent nuclear fuel (SNF) and commercial and U.S. government-owned radioactive wastes. Inventories of most of these materials are reported as of the end of fiscal year (FY) 1996, which is September 30, 1996. Commercial SNF and commercial uranium mill tailings inventories are reported on an end-of-calendar year (CY) basis. All SNF and radioactive waste data reported are based on the most reliable information available from government sources, the open literature, technical reports, and direct contacts. The information forecasted is consistent with the latest DOE/Energy Information Administration (EIA) projections of U.S. commercial nuclear power growth and the expected DOE-related and private industrial and institutional activities. The radioactive materials considered, on a chapter-by-chapter basis, are SNF, high-level waste, transuranic waste, low-level waste, uranium mill tailings, DOE Environmental Restoration Program contaminated environmental media, naturally occurring and accelerator-produced radioactive material, and mixed (hazardous and radioactive) low-level waste. For most of these categories, current and projected inventories are given through FY 2030, and the radioactivity and thermal power are calculated based on reported or estimated isotopic compositions.

  2. Integrated data base report - 1994: US spent nuclear fuel and radioactive waste inventories, projections, and characteristics

    SciTech Connect (OSTI)

    1995-09-01

    The Integrated Data Base Program has compiled historic data on inventories and characteristics of both commercial and U.S. Department of Energy (DOE) spent nuclear fuel and commercial and U.S. government-owned radioactive wastes. Except for transuranic wastes, inventories of these materials are reported as of December 31, 1994. Transuranic waste inventories are reported as of December 31, 1993. All spent nuclear fuel and radioactive waste data reported are based on the most reliable information available from government sources, the open literature, technical reports, and direct contacts. The information forecasted is consistent with the latest DOE/Energy Information Administration (EIA) projections of U.S. commercial nuclear power growth and the expected DOE-related and private industrial and institutional activities. The radioactive materials considered, on a chapter-by-chapter basis, are spent nuclear fuel, high-level waste, transuranic waste, low-level waste, commercial uranium mill tailings, DOE Environmental Restoration Program contaminated environmental media, commercial reactor and fuel-cycle facility decommissioning wastes, and mixed (hazardous and radioactive) low-level waste. For most of these categories, current and projected inventories are given through the calendar-year 2030, and the radioactivity and thermal power are calculated based on reported or estimated isotopic compositions.

  3. Waste Isolation Pilot Plant Transuranic Waste Baseline inventory report. Volume 2. Revision 1

    SciTech Connect (OSTI)

    1995-02-01

    This document is the Baseline Inventory Report for the transuranic (alpha-bearing) wastes stored at the Waste Isolation Pilot Plant (WIPP) in New Mexico. Waste stream profiles including origin, applicable EPA codes, typical isotopic composition, typical waste densities, and typical rates of waste generation for each facility are presented for wastes stored at the WIPP.

  4. Methods of forming hardened surfaces

    DOE Patents [OSTI]

    Branagan, Daniel J. (Iona, ID)

    2004-07-27

    The invention encompasses a method of forming a metallic coating. A metallic glass coating is formed over a metallic substrate. After formation of the coating, at least a portion of the metallic glass can be converted into a crystalline material having a nanocrystalline grain size. The invention also encompasses metallic coatings comprising metallic glass. Additionally, the invention encompasses metallic coatings comprising crystalline metallic material, with at least some of the crystalline metallic material having a nanocrystalline grain size.

  5. SSRL User Financial Account Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    07/25/16 SSRL User Financial Account Form Establish an SSRL user financial account at SLAC to procure gases, chemicals, supplies or services to support your experiment at SLAC's user facilities or to send samples, dewars, or other equipment between SLAC and your institution. To open or renew your SLAC user financial account, complete and submit this form along with a Purchase Order (PO) from your institution. The PO should be made to SLAC National Accelerator Laboratory for the amount of

  6. Radiation Safety Work Control Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Radiation Safety Work Control Form (see instructions on pg-3) Rev. May 2014 Area: Form #: Date: Preliminary Applicability Screen: (a) Will closing the beam line injection stoppers mitigate the radiological hazards introduced by the proposed work? Yes No (b) Can the closed state of the beam line injection stoppers be assured during the proposed work (ie., work does NOT involve injection stoppers or associated HPS)? Yes No If the answers to both questions are yes, the work can be performed safely

  7. Method for forming metal contacts

    DOE Patents [OSTI]

    Reddington, Erik; Sutter, Thomas C; Bu, Lujia; Cannon, Alexandra; Habas, Susan E; Curtis, Calvin J; Miedaner, Alexander; Ginley, David S; Van Hest, Marinus Franciscus Antonius Maria

    2013-09-17

    Methods of forming metal contacts with metal inks in the manufacture of photovoltaic devices are disclosed. The metal inks are selectively deposited on semiconductor coatings by inkjet and aerosol apparatus. The composite is heated to selective temperatures where the metal inks burn through the coating to form an electrical contact with the semiconductor. Metal layers are then deposited on the electrical contacts by light induced or light assisted plating.

  8. LBNL Affiliate Forms - 88-Inch Cyclotron

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New Users‎ > ‎ LBNL Affiliate Forms Affiliate Forms (click here to open pdf)

  9. Supplier Information Form | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Supplier Information Form PDF icon SB_SIF_form_Rev_0110

  10. Radionuclide inventories : ORIGEN2.2 isotopic depletion calculation for high burnup low-enriched uranium and weapons-grade mixed-oxide pressurized-water reactor fuel assemblies.

    SciTech Connect (OSTI)

    Gauntt, Randall O.; Ross, Kyle W.; Smith, James Dean; Longmire, Pamela

    2010-04-01

    The Oak Ridge National Laboratory computer code, ORIGEN2.2 (CCC-371, 2002), was used to obtain the elemental composition of irradiated low-enriched uranium (LEU)/mixed-oxide (MOX) pressurized-water reactor fuel assemblies. Described in this report are the input parameters for the ORIGEN2.2 calculations. The rationale for performing the ORIGEN2.2 calculation was to generate inventories to be used to populate MELCOR radionuclide classes. Therefore the ORIGEN2.2 output was subsequently manipulated. The procedures performed in this data reduction process are also described herein. A listing of the ORIGEN2.2 input deck for two-cycle MOX is provided in the appendix. The final output from this data reduction process was three tables containing the radionuclide inventories for LEU/MOX in elemental form. Masses, thermal powers, and activities were reported for each category.

  11. Paperwork Reduction Act Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Form Paperwork Reduction Act Form Collection Discontinuation Form Paperwork Reduction Act Form (17.93 KB) More Documents & Publications OMB83 D Discontinuance Form OMB 83 C Paperwork Reduction Act Submission (OMB 83-I)

  12. DOE - NNSA/NFO -- Request Forms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Forms NNSANFO Language Options U.S. DOENNSA - Nevada Field Office Forms Click the links below to view the form. Complete the form by filling-out the form fields online and ...

  13. Utah Antidegradation Review Form | Open Energy Information

    Open Energy Info (EERE)

    Utah Antidegradation Review Form Jump to: navigation, search OpenEI Reference LibraryAdd to library Form: Utah Antidegradation Review Form Form Type ApplicationNotice Form Topic...

  14. National inventory of abandoned mine land problems: an emphasis on health, safety, and general welfare impacts

    SciTech Connect (OSTI)

    Honea, R.B.; Baxter, F.P.

    1984-07-01

    In 1977 Congress passed the Surface Mining Control and Reclamation Act, which provided for the abatement of abandoned mine land (AML) problems through a reclamation program funded by a severance tax on current mining. AML was defined as any land, including associated buildings, equipment, and affected areas, that was no longer being used for coal mining by August 1977. This act also created the Office of Surface Mining (OSM) in the Department of the Interior to administer the AML program and to assume other regulatory and research responsibilities. This report documents the design, implementation, and results of a National inventory of the most serious problems associated with past mining practices. One of the objectives of the Inventory was to help OSM and the participating states locate, identify, and rank AML problems and estimate their reclamation costs. Other objectives were to encourage states and Indian tribes to collect such data and to provide OSM with the information necessary to guide its decision-making processes and to quantify the progress of the reclamation program. Because only limited funds were available to design and implement the National inventory and because the reclamation fund established by the Act may never be sufficient to correct all AML problems, OSM has focused on only the top-priority problems. It is stressed that this is not an inventory of AML features but rather an inventory of AML impacts. It should be noted that the data and analysis contained in this report are based on a data collection effort conducted by the states, Indian tribes, and OSM contractors between 1979 and mid-1982.

  15. AX tank farm waste inventory study for the Hanford Tanks Initiative (HTI) project

    SciTech Connect (OSTI)

    Becker, D.L.

    1997-12-22

    In May of 1996, the US Department of Energy implemented a four-year demonstration project identified as the Hanford Tanks Initiative (HTI). The HTI mission is to minimize technical uncertainties and programmatic risks by conducting demonstrations to characterize and remove tank waste using technologies and methods that will be needed in the future to carry out tank waste remediation and tank farm closure at the Hanford Site. Included in the HTI scope is the development of retrieval performance evaluation criteria supporting readiness to close single-shell tanks in the future. A path forward that includes evaluation of closure basis alternatives has been outlined to support the development of retrieval performance evaluation criteria for the AX Farm, and eventual preparation of the SEIS for AX Farm closure. This report documents the results of the Task 4, Waste Inventory study performed to establish the best-basis inventory of waste contaminants for the AX Farm, provides a means of estimating future soil inventories, and provides data for estimating the nature and extent of contamination (radionuclide and chemical) resulting from residual tank waste subsequent to retrieval. Included in the report are a best-basis estimate of the existing radionuclide and chemical inventory in the AX Farm Tanks, an estimate of the nature and extent of existing radiological and chemical contamination from past leaks, a best-basis estimate of the radionuclide and chemical inventory in the AX Farm Tanks after retrieval of 90 percent, 99 percent, and 99.9 percent of the waste, and an estimate of the nature and extent of radionuclide and chemical contamination resulting from retrieval of waste for an assumed leakage from the tanks during retrieval.

  16. Forms | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Forms Forms The following are the official Y-12 forms needed by the public. Forms are provided in one or more of three formats: PDF fillable, Word, and HTML. Select a category to see available forms. Then click the link in the "Format" column to open or download a copy of the form. Procurement-Related Forms Property-Related Forms Miscellaneous Forms UPF-Related Forms If you have questions about these forms, please contact WebSource. Library Forms Procurement-Related Forms

  17. 1998 Toxic Chemical Release Inventory Report for the Emergency Planning and Community Right-to-Know Act of 1986, Title III

    SciTech Connect (OSTI)

    Marjorie B. Stockton

    1999-11-01

    The Emergency Planning and Community Right-to-Know Act (EPCRA) of 1986 [also known as the Superfund Amendment and Reauthorization Act (SARA), Title III], as modified by Executive Order 12856, requires that all federal facilities evaluate the need to submit an annual Toxic Chemical Release Inventory report as prescribed in Title III, Section 313 of this Act. This annual report is due every July for the preceding calendar year. Owners and operators who manufacture, process, or otherwise use certain toxic chemicals above listed threshold quantities are required to report their toxic chemical releases to all environmental mediums (air, water, soil, etc.). At Los Alamos National Laboratory (LANL), no EPCRA Section 313 chemicals were used in 1998 above the reportable threshold limits of 10,000 lb or 25,000 lb. Therefore LANL was not required to submit any Toxic Chemical Release Inventory reports (Form Rs) for 1998. This document was prepared to provide a detailed description of the evaluation on chemical usage and EPCRA Section 313 threshold determinations for LANL for 1998.

  18. Substrate system for spray forming

    DOE Patents [OSTI]

    Chu, Men G.; Chernicoff, William P.

    2002-01-01

    A substrate system for receiving a deposit of sprayed metal droplets including a movable outer substrate on which the sprayed metal droplets are deposited. The substrate system also includes an inner substrate disposed adjacent the outer substrate where the sprayed metal droplets are deposited on the outer substrate. The inner substrate includes zones of differing thermal conductivity to resist substrate layer porosity and to resist formation of large grains and coarse constituent particles in a bulk layer of the metal droplets which have accumulated on the outer substrate. A spray forming apparatus and associated method of spray forming a molten metal to form a metal product using the substrate system of the invention is also provided.

  19. Substrate system for spray forming

    DOE Patents [OSTI]

    Chu, Men G.; Chernicoff, William P.

    2000-01-01

    A substrate system for receiving a deposit of sprayed metal droplets including a movable outer substrate on which the sprayed metal droplets are deposited. The substrate system also includes an inner substrate disposed adjacent the outer substrate where the sprayed metal droplets are deposited on the outer substrate. The inner substrate includes zones of differing thermal conductivity to resist substrate layer porosity and to resist formation of large grains and coarse constituent particles in a bulk layer of the metal droplets which have accumulated on the outer substrate. A spray forming apparatus and associated method of spray forming a molten metal to form a metal product using the substrate system of the invention is also provided.

  20. Methods of forming boron nitride

    SciTech Connect (OSTI)

    Trowbridge, Tammy L; Wertsching, Alan K; Pinhero, Patrick J; Crandall, David L

    2015-03-03

    A method of forming a boron nitride. The method comprises contacting a metal article with a monomeric boron-nitrogen compound and converting the monomeric boron-nitrogen compound to a boron nitride. The boron nitride is formed on the same or a different metal article. The monomeric boron-nitrogen compound is borazine, cycloborazane, trimethylcycloborazane, polyborazylene, B-vinylborazine, poly(B-vinylborazine), or combinations thereof. The monomeric boron-nitrogen compound is polymerized to form the boron nitride by exposure to a temperature greater than approximately 100.degree. C. The boron nitride is amorphous boron nitride, hexagonal boron nitride, rhombohedral boron nitride, turbostratic boron nitride, wurzite boron nitride, combinations thereof, or boron nitride and carbon. A method of conditioning a ballistic weapon and a metal article coated with the monomeric boron-nitrogen compound are also disclosed.

  1. PROCESS OF FORMING POWDERED MATERIAL

    DOE Patents [OSTI]

    Glatter, J.; Schaner, B.E.

    1961-07-14

    A process of forming high-density compacts of a powdered ceramic material is described by agglomerating the powdered ceramic material with a heat- decompossble binder, adding a heat-decompossble lubricant to the agglomerated material, placing a quantity of the material into a die cavity, pressing the material to form a compact, pretreating the compacts in a nonoxidizing atmosphere to remove the binder and lubricant, and sintering the compacts. When this process is used for making nuclear reactor fuel elements, the ceramic material is an oxide powder of a fissionsble material and after forming, the compacts are placed in a cladding tube which is closed at its ends by vapor tight end caps, so that the sintered compacts are held in close contact with each other and with the interior wall of the cladding tube.

  2. Method of forming structural heliostat

    DOE Patents [OSTI]

    Anderson, Alfred J.

    1984-06-26

    In forming a heliostat having a main support structure and pivoting and tilting motors and gears and a mirror module for reflecting solar energy onto a collector, the improvement characterized by a method of forming the mirror module in which the mirror is laid upon a solid rigid supporting bed in one or more sections, with or without focusing; a mirror backing sheet is applied by first applying respective thin layers of silicone grease and, thereafter, progressively rolling application to eliminate air bubbles; followed by affixing of a substrate assembly to the mirror backing sheet to form a mirror module that does not curve because of thermally induced stresses and differential thermal expansion or contraction effects. The silicone grease also serves to dampen fluttering of the mirror and protect the mirror backside against adverse effects of the weather. Also disclosed are specific details of preferred embodiments.

  3. ExRep_form.indd

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Report Submit all experiment reports using this fillable pdf form and upload the saved file using the LANSCE proposals Websi After logging in, click the "Upload Experiment Report" link in the proposal actions view table. Local contact Flight path/instrument Proposal number Title Authors and Affiliations Experiment report

  4. Triggered pore-forming agents

    DOE Patents [OSTI]

    Bayley, H.; Walker, B.J.; Chang, C.Y.; Niblack, B.; Panchal, R.

    1998-07-07

    An inactive pore-forming agent is revealed which is activated to lytic function by a condition such as pH, light, heat, reducing potential, or metal ion concentration, or substance such as a protease, at the surface of a cell. 30 figs.

  5. HHS SMALL BUSINESS REVIEW FORM

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Form 4220.2 (Revised January 2014) Office of Small and Disadvantaged Business Utilization Small Business Review OSDBU Control Number: _______________________________________Date Received: ______________________________ A. Project Information 1. Requisition Number: ________________________ Acquisition Instrument Proposed/Contract Type: [ ] Contract No (Mod): ______________________ [ ] Departmental IDIQ No: ___________________ [ ] GSA Schedule: _________________________ [ ] GWAC Contract:

  6. Spin-forming Project Report

    SciTech Connect (OSTI)

    Switzner, Nathan; Henry, Dick

    2009-03-20

    In a second development order, spin-forming equipment was again evaluated using the test shape, a hemispherical shell. In this second development order, pure vanadium and alloy titanium (Ti-6Al-4V) were spin-formed, as well as additional copper and 21-6-9 stainless. In the first development order the following materials had been spin-formed: copper (alloy C11000 ETP), 6061 aluminum, 304L stainless steel, 21-6-9 stainless steel, and tantalum-2.5% tungsten. Significant challenges included properly adjusting the rotations-per-minute (RPM), cracking at un-beveled edges and laser marks, redressing of notches, surface cracking, non-uniform temperature evolution in the titanium, and cracking of the tailstock. Lessons learned were that 300 RPM worked better than 600 RPM for most materials (at the feed rate of 800 mm/min); beveling the edges to lower the stress reduces edge cracking; notches, laser marks, or edge defects in the preform doom the process to cracking and failure; coolant is required for vanadium spin-forming; increasing the number of passes to nine or more eliminates surface cracking for vanadium; titanium develops a hot zone in front of the rollers; and the tailstock should be redesigned to eliminate the cylindrical stress concentrator in the center.

  7. Process for forming sulfuric acid

    DOE Patents [OSTI]

    Lu, Wen-Tong P.

    1981-01-01

    An improved electrode is disclosed for the anode in a sulfur cycle hydrogen generation process where sulfur dioxie is oxidized to form sulfuric acid at the anode. The active compound in the electrode is palladium, palladium oxide, an alloy of palladium, or a mixture thereof. The active compound may be deposited on a porous, stable, conductive substrate.

  8. Technetium Immobilization Forms Literature Survey

    SciTech Connect (OSTI)

    Westsik, Joseph H.; Cantrell, Kirk J.; Serne, R. Jeffrey; Qafoku, Nikolla

    2014-05-01

    Of the many radionuclides and contaminants in the tank wastes stored at the Hanford site, technetium-99 (99Tc) is one of the most challenging to effectively immobilize in a waste form for ultimate disposal. Within the Hanford Tank Waste Treatment and Immobilization Plant (WTP), the Tc will partition between both the high-level waste (HLW) and low-activity waste (LAW) fractions of the tank waste. The HLW fraction will be converted to a glass waste form in the HLW vitrification facility and the LAW fraction will be converted to another glass waste form in the LAW vitrification facility. In both vitrification facilities, the Tc is incorporated into the glass waste form but a significant fraction of the Tc volatilizes at the high glass-melting temperatures and is captured in the off-gas treatment systems at both facilities. The aqueous off-gas condensate solution containing the volatilized Tc is recycled and is added to the LAW glass melter feed. This recycle process is effective in increasing the loading of Tc in the LAW glass but it also disproportionally increases the sulfur and halides in the LAW melter feed which increases both the amount of LAW glass and either the duration of the LAW vitrification mission or the required supplemental LAW treatment capacity.

  9. Security Review Processing Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Security Review Processing Form Security Review Processing Form Security Review Process - Please review carefully. Security Acknowledge Form - Complete and return immediately. ...

  10. Forms & Documents | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Forms & Documents Incremental Budget Request Form FY 2016 Field Work Proposal (FWP) use for WAS Field Work Proposal (FWP) Out-of-Cycle use for proposals LDRD Budget Template New Project Set Up Form Capital Equipment Validation Form

  11. An approach for verifying biogenic greenhouse gas emissions inventories with atmospheric CO 2 concentration data

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Ogle, Stephen; Davis, Kenneth J.; Lauvaux, Thomas; Schuh, Andrew E.; Cooley, Dan; West, Tristram O.; Heath, L.; Miles, Natasha; Richardson, S. J.; Breidt, F. Jay; et al

    2015-03-10

    Verifying national greenhouse gas (GHG) emissions inventories is a critical step to ensure that reported emissions data to the United Nations Framework Convention on Climate Change (UNFCCC) are accurate and representative of a country’s contribution to GHG concentrations in the atmosphere. Verification could include a variety of evidence, but arguably the most convincing verification would be confirmation of a change in GHG concentrations in the atmosphere that is consistent with reported emissions to the UNFCCC. We report here on a case study evaluating this option based on a prototype atmospheric CO2 measurement network deployed in the Mid-Continent Region of themore » conterminous United States. We found that the atmospheric CO2 measurement data did verify the accuracy of the emissions inventory within the confidence limits of the emissions estimates, suggesting that this technology could be further developed and deployed more widely in the future for verifying reported emissions.« less

  12. Pacific Northwest Laboratory facilities radionuclide inventory assessment CY 1992-1993

    SciTech Connect (OSTI)

    Sula, M.J.; Jette, S.J.

    1994-09-01

    Assessments for evaluating compliance with airborne radionuclide emission monitoring requirements in the National Emission Standards for Hazardous Air Pollutants (NESHAPs - U.S. Code of Federal Regulations, Title 40 Part 61, Subparts H and I) were performed for 33 buildings at the U.S. Department of Energy`s (DOE) Pacific Northwest Laboratory on the Hanford Site, and for five buildings owned and operated by Battelle, Pacific Northwest Laboratories in Richland, Washington. The assessments were performed using building radionuclide inventory data obtained in 1992 and 1993. Results of the assessments are summarized in Table S.1 for DOE-PNL buildings and in Table S.2 for Battelle-owned buildings. Based on the radionuclide inventory assessments, four DOE-PNL buildings (one with two emission points) require continuous sampling for radionuclides per 40 CFR 61. None of the Battelle-owned buildings require continuous emission sampling.

  13. Dismantling of the PETRA glove box: tritium contamination and inventory assessment

    SciTech Connect (OSTI)

    Wagner, R.

    2015-03-15

    The PETRA facility is the first installation in which experiments with tritium were carried out at the Tritium Laboratory Karlsruhe. After completion of two main experimental programs, the decommissioning of PETRA was initiated with the aim to reuse the glove box and its main still valuable components. A decommissioning plan was engaged to: -) identify the source of tritium release in the glove box, -) clarify the status of the main components, -) assess residual tritium inventories, and -) de-tritiate the components to be disposed of as waste. Several analytical techniques - calorimetry on small solid samples, wipe test followed by liquid scintillation counting for surface contamination assessment, gas chromatography on gaseous samples - were deployed and cross-checked to assess the remaining tritium inventories and initiate the decommissioning process. The methodology and the main outcomes of the numerous different tritium measurements are presented and discussed. (authors)

  14. Method of forming calthrate ice

    DOE Patents [OSTI]

    Hino, T.; Gorski, A.J.

    1985-09-30

    A method of forming clathrate ice in a supercooled water-based liquid contained in a vessel is disclosed. Initially, an oscillator device is located in the liquid in the vessel. The oscillator device is then oscillated ultransonically so that small crystals are formed in the liquid. Thes small crystals serve as seed crystals for ice formation in the liquid and thereby prevent supercooling of the liquid. Preferably, the oscillating device is controlled by a thermostat which initiates operation of the oscillator device when the temperature of the liquid is lowered to the freezing point. Thereafter, the operation of the oscillator device is terminated when ice is sensed in the liquid by an ice sensor.

  15. Unsplit bipolar pulse forming line

    DOE Patents [OSTI]

    Rhodes, Mark A.

    2011-05-24

    A bipolar pulse forming transmission line module and system for linear induction accelerators having first, second, third, and fourth planar conductors which form a sequentially arranged interleaved stack having opposing first and second ends, with dielectric layers between the conductors. The first and second planar conductors are connected to each other at the first end, and the first and fourth planar conductors are connected to each other at the second end via a shorting plate. The third planar conductor is electrically connectable to a high voltage source, and an internal switch functions to short at the first end a high voltage from the third planar conductor to the fourth planar conductor to produce a bipolar pulse at the acceleration axis with a zero net time integral. Improved access to the switch is enabled by an aperture through the shorting plate and the proximity of the aperture to the switch.

  16. Method of forming clathrate ice

    DOE Patents [OSTI]

    Hino, Toshiyuki (Tokyo, JP); Gorski, Anthony J. (Lemont, IL)

    1987-01-01

    A method of forming clathrate ice in a supercooled water-based liquid contained in a vessel is disclosed. Initially, an oscillator device is located in the liquid in the vessel. The oscillator device is then oscillated ultrasonically so that small crystals are formed in the liquid. These small crystals serve as seed crystals for ice formation in the liquid and thereby prevent supercooling of the liquid. Preferably, the oscillating device is controlled by a thermostat which initiates operation of the oscillator device when the temperature of the liquid is lowered to the freezing point. Thereafter, the operation of the oscillator device is terminated when ice is sensed in the liquid by an ice sensor.

  17. Method of forming a joint

    DOE Patents [OSTI]

    Butt, Darryl Paul; Cutler, Raymond Ashton; Rynders, Steven Walton; Carolan, Michael Francis

    2006-08-22

    A method of joining at least two sintered bodies to form a composite structure, including providing a first multicomponent metallic oxide having a perovskitic or fluorite crystal structure; providing a second sintered body including a second multicomponent metallic oxide having a crystal structure of the same type as the first; and providing at an interface a joint material containing at least one metal oxide containing at least one metal identically contained in at least one of the first and second multicomponent metallic oxides. The joint material is free of cations of Si, Ge, Sn, Pb, P and Te and has a melting point below the sintering temperatures of both sintered bodies. The joint material is heated to a temperature above the melting point of the metal oxide(s) and below the sintering temperatures of the sintered bodies to form the joint. Structures containing such joints are also disclosed.

  18. Chevron, GE form Technology Alliance

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Chevron, GE form Technology Alliance February 3, 2014 HOUSTON, TX, Feb. 3, 2014-Chevron Energy Technology Company and GE Oil & Gas announced today the creation of the Chevron GE Technology Alliance, which will develop and commercialize valuable technologies to solve critical needs for the oil and gas industry. The Alliance builds upon a current collaboration on flow analysis technology for oil and gas wells. It will leverage research and development from GE's newest Global Research Center,

  19. Meeting the challenge: A case study of Sandia National Laboratories Records Inventory Project

    SciTech Connect (OSTI)

    Cusimano, L.J.; Roberts, C.B.

    1993-08-01

    Sandia National Laboratories determined that the most effective method to address records management initiatives would be through a single, comprehensive facilities wide records inventory and retention schedule project. The logistic of such an undertaking (estimated at 425,000 linear feet) are demanding. The relatively short time frame required for completion and the project`s size called for sound, up front planning by Sandia and ultimately the support of an outside contractor for qualified resources to execute the plan.

  20. Vault Safety and Inventory System users manual, PRIME 2350. Revision 1

    SciTech Connect (OSTI)

    Downey, N.J.

    1994-12-14

    This revision is issued to request review of the attached document: VSIS User Manual, PRIME 2350, which provides user information for the operation of the VSIS (Vault Safety and Inventory System). It describes operational aspects of Prime 2350 minicomputer and vault data acquisition equipment. It also describes the User`s Main Menu and menu functions, including REPORTS. Also, system procedures for the Prime 2350 minicomputer are covered.

  1. Rib forming tool for tubing

    DOE Patents [OSTI]

    Rowley, James P.; Lewandowski, Edward F.; Groh, Edward F.

    1976-01-01

    Three cylindrical rollers are rotatably mounted equidistant from the center of a hollow tool head on radii spaced 120.degree. apart. Each roller has a thin flange; the three flanges lie in a single plane to form an internal circumferential rib in a rotating tubular workpiece. The tool head has two complementary parts with two rollers in one part of the head and one roller in the other part; the two parts are joined by a hinge. A second hinge, located so the rollers are between the two hinges, connects one of the parts to a tool bar mounted in a lathe tool holder. The axes of rotation of both hinges and all three rollers are parallel. A hole exposing equal portions of the three roller flanges is located in the center of the tool head. The two hinges permit the tool head to be opened and rotated slightly downward, taking the roller flanges out of the path of the workpiece which is supported on both ends and rotated by the lathe. The parts of the tool head are then closed on the workpiece so that the flanges are applied to the workpiece and form the rib. The tool is then relocated for forming of the next rib.

  2. 1997 Toxic Chemical Release Inventory Report for the Emergency Planning and Community Right-to-Know Act of 1986, Title III, Section 313

    SciTech Connect (OSTI)

    Heather McBride

    1997-07-01

    The Emergency Planning and Community Right-to-Know Act of 1986 (EPCIL4), Title III, Section 313 [also known as the Superfund Amendment and Reauthorization Act (SARA)], as modified by Executive Order 12856, requires all federal facilities to submit an annual Toxic Chemical Release Inventory report every July for the preceding calendar year. Owners and operators of manufacturing, processing, or production facilities are required to report their toxic chemical releases to all environmental mediums (air, water, soil, etc.). At Los Alamos National Laboratory (LANL), nitric acid was the only toxic chemical used in 1997 that met the reportable threshold limit of 10,000 lb. Form R is the only documentation required by the Environmental Protection Agency, and it is included in the appendix of this report. This report, as requested by DOE, is provided for documentation purposes. In addition, a detailed description of the evaluation and reporting process for chemicals and processes at LANL has been included.

  3. Measuring Li+ inventory losses in LiCoO2/graphite cells using Raman microscopy

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Snyder, Chelsea Marie; Apblett, Christopher A.; Grillet, Anne; Thomas Edwin Beechem; Duquette, David

    2016-03-25

    Here, the contribution from loss of Li+ inventory to capacity fade is described for slow rates (C/10) and long-term cycling (up to 80 cycles). It was found through electrochemical testing and ex-situ Raman analysis that at these slow rates, the entirety of capacity loss up to 80 cycles can be explained by loss of Li+ inventory in the cell. The Raman spectrum of LiCoO2 is sensitive to the state of lithiation and can therefore be leveraged to quantify the state of lithiation for individual particles. With these Raman derived estimates, the lithiation state of the cathode in the discharged statemore » is compared to electrochemical data as a function of cycle number. High correlation is found between Raman quantifications of cycleable lithium and the capacity fade. Additionally, the linear relationship between discharge capacity and cell overpotential suggests that the loss of capacity stems from an impedance rise of the electrodes, which based on Li inventory losses, is caused by SEI formation and repair.« less

  4. Continuous Fiber Ceramic Composite (CFCC) Program. Inventory of federally funded CFCC R&D projects

    SciTech Connect (OSTI)

    Richlen, S.; Caton, G.M.; Karnitz, M.A.; Cox, T.D.; Hong, W.

    1993-05-01

    Continuous Fiber Ceramic Composites (CFCC) are a new class of materials that are lighter, stronger, more corrosion resistant, and capable of performing at elevated temperatures. This new type of material offers the potential to meet the demands of a variety of industrial, military, and aerospace applications. The Department of Energy Office of Industrial Technologies (OIT) has a new program on CFCCs for industrial applications and this program has requested an inventory of all federal projects on CFCCs that relate to their new program. The purpose of this project is to identify all other ongoing CFCC research to avoid redundancy in the OIT Program. The inventory will be used as a basis for coordinating with the other ongoing ceramic composite projects. The inventory is divided into two main parts. The first part is concerned with CFCC supporting technologies projects and is organized by the categories listed below. (1) Composite Design; (2) Materials Characterization; (3) Test Methods; (4) Non-Destructive Evaluation; (5) Environmental Effects; (6) Mechanical Properties; (7) Database Life Prediction; (8) Fracture/Damage; and (9) Joining. The second part has information on component development, fabrication, and fiber-related projects.

  5. Procedures for Interagency Consultation to Avoid or Mitigate Adverse Effects on Rivers in the Nationwide Inventory (CEQ, 1980)

    Broader source: Energy.gov [DOE]

    These Council on Environmental Quality (CEQ) procedures are designed to assist federal officials in complying with the President's directive to protect rivers in the Nationwide Inventory through the normal environmental analysis process.

  6. SRS 2010 Vegetation Inventory GeoStatistical Mapping Results for Custom Reaction Intensity and Total Dead Fuels.

    SciTech Connect (OSTI)

    Edwards, Lloyd A.; Paresol, Bernard

    2014-09-01

    This report of the geostatistical analysis results of the fire fuels response variables, custom reaction intensity and total dead fuels is but a part of an SRS 2010 vegetation inventory project. For detailed description of project, theory and background including sample design, methods, and results please refer to USDA Forest Service Savannah River Site internal report “SRS 2010 Vegetation Inventory GeoStatistical Mapping Report”, (Edwards & Parresol 2013).

  7. CERAMIC WASTE FORM DATA PACKAGE

    SciTech Connect (OSTI)

    Amoroso, J.; Marra, J.

    2014-06-13

    The purpose of this data package is to provide information about simulated crystalline waste forms that can be used to select an appropriate composition for a Cold Crucible Induction Melter (CCIM) proof of principle demonstration. Melt processing, viscosity, electrical conductivity, and thermal analysis information was collected to assess the ability of two potential candidate ceramic compositions to be processed in the Idaho National Laboratory (INL) CCIM and to guide processing parameters for the CCIM operation. Given uncertainties in the CCIM capabilities to reach certain temperatures throughout the system, one waste form designated 'Fe-MP' was designed towards enabling processing and another, designated 'CAF-5%TM-MP' was designed towards optimized microstructure. Melt processing studies confirmed both compositions could be poured from a crucible at 1600{degrees}C although the CAF-5%TM-MP composition froze before pouring was complete due to rapid crystallization (upon cooling). X-ray diffraction measurements confirmed the crystalline nature and phase assemblages of the compositions. The kinetics of melting and crystallization appeared to vary significantly between the compositions. Impedance spectroscopy results indicated the electrical conductivity is acceptable with respect to processing in the CCIM. The success of processing either ceramic composition will depend on the thermal profiles throughout the CCIM. In particular, the working temperature of the pour spout relative to the bulk melter which can approach 1700{degrees}C. The Fe-MP composition is recommended to demonstrate proof of principle for crystalline simulated waste forms considering the current configuration of INL's CCIM. If proposed modifications to the CCIM can maintain a nominal temperature of 1600{degrees}C throughout the melter, drain, and pour spout, then the CAF-5%TM-MP composition should be considered for a proof of principle demonstration.

  8. DOCUMENT RELEASE FORM G5

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DOCUMENT RELEASE FORM G5 (1) Document Number: RPP-RPT-431 69 (2) Revision Number: 0 (3) Effective Date: 9/30/2009 (4) Document Type: E] Digital Image l Hard copy (a) Number of pages (including the IDRF) or 125 E PDF ElVideo number of digital images (5) Release Type Z New 0 Cancel El Page Change l complete Revision (6) Document Title: 2009 Auto-TCR for Tank 241 -T-1 11 (7) Change/Release Initial Issuance Description: (8) Change Initial Issuance Justification: (9) Associated (a) Structure

  9. DOE Form 1332.4

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 DOE F 243.2 Records Scheduling Request DOE F 243 2 Records Scheduling Request Form (1).pdf (335.35 KB) More Documents & Publications DOE F 243.5 Electronic Recordkeeping System Questionnaire Records Management Handbook Records Management Handbook Energy

    5 Electronic Recordkeeping System Questionnaire DOE F 243.5 Electronic Recordkeeping System Questionnaire DOE F 243.5 Electronic Recordkeeping System Questionnaire.pdf (69.34 KB) More Documents & Publications DOE F 243.5

  10. FORMING PROTECTIVE FILMS ON METAL

    DOE Patents [OSTI]

    Gurinsky, D.H.; Kammerer, O.F.; Sadofsky, J.; Weeks, J.R.

    1958-12-16

    Methods are described of inhibiting the corrosion of ferrous metal by contact with heavy liquid metals such as bismuth and gallium at temperatures above 500 icient laborato C generally by bringing nltrogen and either the metal zirconium, hafnium, or titanium into reactlve contact with the ferrous metal to form a thin adherent layer of the nitride of the metal and thereafter maintaining a fractional percentage of the metal absorbed in the heavy liquid metal in contact with the ferrous metal container. The general purpose for uslng such high boiling liquid metals in ferrous contalners would be as heat transfer agents in liquid-metal-fueled nuclear reactors.

  11. DOSE ASSESSMENT OF THE FINAL INVENTORIES IN CENTER SLIT TRENCHES ONE THROUGH FIVE

    SciTech Connect (OSTI)

    Collard, L.; Hamm, L.; Smith, F.

    2011-05-02

    In response to a request from Solid Waste Management (SWM), this study evaluates the performance of waste disposed in Slit Trenches 1-5 by calculating exposure doses and concentrations. As of 8/19/2010, Slit Trenches 1-5 have been filled and are closed to future waste disposal in support of an ARRA-funded interim operational cover project. Slit Trenches 6 and 7 are currently in operation and are not addressed within this analysis. Their current inventory limits are based on the 2008 SA and are not being impacted by this study. This analysis considers the location and the timing of waste disposal in Slit Trenches 1-5 throughout their operational life. In addition, the following improvements to the modeling approach have been incorporated into this analysis: (1) Final waste inventories from WITS are used for the base case analysis where variance in the reported final disposal inventories is addressed through a sensitivity analysis; (2) Updated K{sub d} values are used; (3) Area percentages of non-crushable containers are used in the analysis to determine expected infiltration flows for cases that consider collapse of these containers; (4) An updated representation of ETF carbon column vessels disposed in SLIT3-Unit F is used. Preliminary analyses indicated a problem meeting the groundwater beta-gamma dose limit because of high H-3 and I-129 release from the ETF vessels. The updated model uses results from a recent structural analysis of the ETF vessels indicating that water does not penetrate the vessels for about 130 years and that the vessels remain structurally intact throughout the 1130-year period of assessment; and (5) Operational covers are included with revised installation dates and sets of Slit Trenches that have a common cover. With the exception of the modeling enhancements noted above, the analysis follows the same methodology used in the 2008 PA (WSRC, 2008) and the 2008 SA (Collard and Hamm, 2008). Infiltration flows through the vadose zone are

  12. Integrally formed radio frequency quadrupole

    DOE Patents [OSTI]

    Abbott, Steven R.

    1989-01-01

    An improved radio frequency quadrupole (10) is provided having an elongate housing (11) with an elongate central axis (12) and top, bottom and two side walls (13a-d) symmetrically disposed about the axis, and vanes (14a-d) formed integrally with the walls (13a-d), the vanes (14a-d) each having a cross-section at right angles to the central axis (12) which tapers inwardly toward the axis to form electrode tips (15a-d) spaced from each other by predetermined distances. Each of the four walls (13a-d), and the vanes (14a-d) integral therewith, is a separate structural element having a central lengthwise plane (16) passing through the tip of the vane, the walls (13a-d) having flat mounting surfaces (17, 18) at right angles to and parallel to the control plane (16), respectively, which are butted together to position the walls and vane tips relative to each other.

  13. CFCNCA Sample Pledge Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CFCNCA Sample Pledge Form CFCNCA Sample Pledge Form This file contains a sample pledge form and instructions for completing a paper donation through the CFC. CFCNCA Fall 2012 Sample Pledge Form.pdf (151.39 KB) More Documents & Publications CFCNCA Sample Pledge Form 2012 CFCNCA Catalog of Caring DOE F 3630.1 Rights and Benefits of Reservists Called to Active Duty

  14. Alumina forming iron base superalloy

    DOE Patents [OSTI]

    Yamamoto, Yukinori; Muralidharan, Govindarajan; Brady, Michael P.

    2014-08-26

    An austenitic stainless steel alloy, consists essentially of, in weight percent 2.5 to 4 Al; 25 to 35 Ni; 12 to 19 Cr; at least 1, up to 4 total of at least one element selected from the group consisting of Nb and Ta; 0.5 to 3 Ti; less than 0.5 V; 0.1 to 1 of at least on element selected from the group consisting of Zr and Hf; 0.03 to 0.2 C; 0.005 to 0.1 B; and base Fe. The weight percent Fe is greater than the weight percent Ni. The alloy forms an external continuous scale including alumina, and contains coherent precipitates of .gamma.'-Ni.sub.3Al, and a stable essentially single phase FCC austenitic matrix microstructure. The austenitic matrix is essentially delta-ferrite-free and essentially BCC-phase-free.

  15. Miscellaneous Waste-Form FEPs

    SciTech Connect (OSTI)

    A. Schenker

    2000-12-08

    The US DOE must provide a reasonable assurance that the performance objectives for the Yucca Mountain Project (YMP) potential radioactive-waste repository can be achieved for a 10,000-year post-closure period. The guidance that mandates this direction is under the provisions of 10 CFR Part 63 and the US Department of Energy's ''Revised Interim Guidance Pending Issuance of New US Nuclear Regulatory Commission (NRC) Regulations (Revision 01, July 22, 1999), for Yucca Mountain, Nevada'' (Dyer 1999 and herein referred to as DOE's Interim Guidance). This assurance must be demonstrated in the form of a performance assessment that: (1) identifies the features, events, and processes (FEPs) that might affect the performance of the potential geologic repository; (2) examines the effects of such FEPs on the performance of the potential geologic repository; (3) estimates the expected annual dose to a specified receptor group; and (4) provides the technical basis for inclusion or exclusion of specific FEPs.

  16. Form W-9 (Rev. October 2007)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Give form to the requester. Do not send to the IRS. Form W-9 Request for Taxpayer ... Date General Instructions Form W-9 (Rev. 10-2007) Part I Part II Business ...

  17. DEQ UPDES Forms Website | Open Energy Information

    Open Energy Info (EERE)

    UPDES Forms Website Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: DEQ UPDES Forms Website Abstract A website containing forms and guidance for...

  18. Employee Information Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Information Form Employee Information Form New Employee Information Form (103.85 KB) More Documents & Publications TEE-0074 - In the Matter of GE Appliances & Lighting CX-007131: Categorical Exclusion Determination CX-007148: Categorical Exclusion Determination

  19. Capital Equipment Validation Form | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Capital Equipment Validation Form Version Number: 2.0 Document Number: Form 48100.001 Effective Date: 02/2015 File (public): Office spreadsheet icon form_48100.001_rev2.xls

  20. Postdoctoral Initial Discussion Form | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Initial Discussion Form This form outlines initial goals and clarifies expectations between a postdoc and his/her supervisor for a successful and productive relationship. Microsoft Office document icon Postdoctoral Initial Discussion Form.doc

  1. Form:EZFeed Policy | Open Energy Information

    Open Energy Info (EERE)

    Help Apps Datasets Community Login | Sign Up Search Form Edit History Form:EZFeed Policy Jump to: navigation, search This is the 'EZFeed Policy' form. To add a page with this...

  2. Analysis of potential combustion source impacts on acid deposition using an independently derived inventory. Volume I

    SciTech Connect (OSTI)

    Not Available

    1983-12-01

    This project had three major objectives. The first objective was to develop a fossil fuel combustion source inventory (NO/sub x/, SO/sub x/, and hydrocarbon emissions) that would be relatively easy to use and update for analyzing the impact of combustion emissions on acid deposition in the eastern United States. The second objective of the project was to use the inventory data as a basis for selection of a number of areas that, by virtue of their importance in the acid rain issue, could be further studied to assess the impact of local and intraregional combustion sources. The third objective was to conduct an analysis of wet deposition monitoring data in the areas under study, along with pertinent physical characteristics, meteorological conditions, and emission patterns of these areas, to investigate probable relationships between local and intraregional combustion sources and the deposition of acidic material. The combustion source emissions inventory has been developed for the eastern United States. It characterizes all important area sources and point sources on a county-by-county basis. Its design provides flexibility and simplicity and makes it uniquely useful in overall analysis of emission patterns in the eastern United States. Three regions with basically different emission patterns have been identified and characterized. The statistical analysis of wet deposition monitoring data in conjunction with emission patterns, wind direction, and topography has produced consistent results for each study area and has demonstrated that the wet deposition in each area reflects the characteristics of the localized area around the monitoring sites (typically 50 to 150 miles). 8 references, 28 figures, 39 tables.

  3. 2015 Housing Innovation Awards Application Form | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Housing Innovation Awards Application Form 2015 Housing Innovation Awards Application Form ... The 2015 ceremony will take place at the EEBA Excellence in Building Conference & Expo ...

  4. DOE Forms National Center for Photovoltaics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Services » Forms » DOE Forms Management FAQ's DOE Forms Management FAQ's Facts.jpg What types of forms are there? Departmental Form: for use department-wide by DOE personnel only Headquarters (HQ) Form: developed or managed by a DOE Headquarters organization and generally for use by HQ or within an HQ element Local Form: for use within a specific DOE Field Office Optional Form: developed by a Federal agency for use by two or more agencies, or non-mandatory Government-wide use and approved by

  5. Form EIA-860 | Open Energy Information

    Open Energy Info (EERE)

    LibraryAdd to library Form: Form EIA-860 Abstract The U.S. Energy Information Administration (EIA) requires certain developers of electric generating plants (meeting certain...

  6. Pulse Pressure Forming of Lightweight Materials, Development...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Forming of Lightweight Materials, Development of High Strength Superplastic Al Sheet, Friction Stir Spot Welding of Advanced High Strength Steels Pulse Pressure Forming of...

  7. CDOT Applications and Forms | Open Energy Information

    Open Energy Info (EERE)

    to library Legal Document- OtherOther: CDOT Applications and FormsLegal Abstract The California Department of Transportation (CDOT) provides various applications and forms,...

  8. CDC DOGGR Forms | Open Energy Information

    Open Energy Info (EERE)

    CDC DOGGR FormsLegal Abstract The California Department of Conservation (CDC) Division of Oil, Gas & Geothermal Resources (DOGGR) provides various forms and information related to...

  9. DOE Forms Management FAQ's | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Services » Forms » DOE Forms Management FAQ's DOE Forms Management FAQ's Facts.jpg What types of forms are there? Departmental Form: for use department-wide by DOE personnel only Headquarters (HQ) Form: developed or managed by a DOE Headquarters organization and generally for use by HQ or within an HQ element Local Form: for use within a specific DOE Field Office Optional Form: developed by a Federal agency for use by two or more agencies, or non-mandatory Government-wide use and approved by

  10. New Species of Cyanobacteria Forms Intracellular Carbonates

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New Species of Cyanobacteria Forms Intracellular Carbonates New Species of Cyanobacteria Forms Intracellular Carbonates Print Wednesday, 30 January 2013 00:00 A new species of ...

  11. Arizona Department of Environmental Quality's Application Forms...

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library Web Site: Arizona Department of Environmental Quality's Application Forms and Guidance Website Abstract This site contains forms...

  12. Form 2C | Open Energy Information

    Open Energy Info (EERE)

    Application: Form 2CLegal Abstract Form 2C: Application for Permit to Discharge Wastewater - Existing Industrial Facilities, current through August 14, 2014. Published NA...

  13. Form 2B | Open Energy Information

    Open Energy Info (EERE)

    Application: Form 2BLegal Abstract Form 2B: Application for Permit to Discharge Wastewater from Concentrated Animal Feeding Operations and Aquatic Animal Production...

  14. California Water Forms | Open Energy Information

    Open Energy Info (EERE)

    Not provided DOI Not Provided Check for DOI availability: http:crossref.org Online Internet link for California Water Forms Citation California Water Forms(2009). Retrieved from...

  15. Security Forms and Information | Department of Energy

    Office of Environmental Management (EM)

    New Employee Orientation Security Forms and Information Security Forms and Information ... Until such time as the new employee receives a permanent photo identification badge, the ...

  16. FAQs for Survey Forms 804 and 814

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    intended for cracking into olefins. EIA-804 Survey form & instructions Contact: Robert Merriam, (202) 586-4615 EIA-814 Survey form & instructions Contact: Chris Buckner, (202)...

  17. Design Code Survey Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Design Code Survey Form Design Code Survey Form Survey of Safety Software Used in Design of Structures, Systems, and Components 1. Introduction The Department's Implementation Plan ...

  18. Alten Energias Renovables Sociedad Limitada formly Solpark |...

    Open Energy Info (EERE)

    Alten Energias Renovables Sociedad Limitada formly Solpark Jump to: navigation, search Name: Alten Energias Renovables Sociedad Limitada (formly Solpark) Place: Bilbao, Spain...

  19. Mentee Profile Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Mentee Profile Form (241.46 KB) More Documents & Publications Mentor Profile Form Tools for the Mentor Tools for the Mentee Benefits Executive Resources Learning and Workforce ...

  20. The NERSC Allocation Request Form (ERCAP)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    via a web form known as the ERCAP (Energy Research Computing Allocations Process) Request Form. ERCAP is accessed through the NERSC Information Management (NIM) web interface ...

  1. Environmental Protection Department`s well inventory (through the second quarter of 1993)

    SciTech Connect (OSTI)

    Not Available

    1993-09-01

    This report is an inventory of the wells recorded in Environmental Protection Department/Environmental Monitoring Section (EPD/EMS) documents since the startup of the Savannah River Site (SRS) and includes wells monitored by special request and SRS research wells. The purpose of this report is as follows: to provide a historical record of the wells that EPD/EMS has monitored; to provide a document containing a list of wells that are currently in the EPD/EMS Groundwater Monitoring Program; to provide pertinent information about all wells listed in EPD/EMS documents.

  2. Beyond the Inventory: An Interagency Collaboration to Reduce Greenhouse Gas Emissions in the Greater Yellowstone Area

    SciTech Connect (OSTI)

    Kandt, A.; Hotchkiss, E.; Fiebig, M.

    2010-10-01

    As one of the largest, intact ecosystems in the continental United States, land managers within the Greater Yellowstone Area (GYA) have recognized the importance of compiling and understanding agency greenhouse gas (GHG) emissions. The 10 Federal units within the GYA have taken an active role in compiling GHG inventories on a unit- and ecosystem-wide level, setting goals for GHG mitigation, and identifying mitigation strategies for achieving those goals. This paper details the processes, methodologies, challenges, solutions, and lessons learned by the 10 Federal units within the GYA throughout this ongoing effort.

  3. On the Contribution of Gamma Ray Bursts to the Galactic Inventory of Some Intermediate Mass Nuclei

    SciTech Connect (OSTI)

    Pruet, J; Surman, R; McLaughlin, G C

    2004-01-23

    Light curves from a growing number of Gamma Ray Bursts (GRBs) indicate that GRBs copiously produce radioactive Ni moving outward at fractions of the speed of light. We calculate nuclear abundances of elements accompanying the outflowing Ni under the assumption that this Ni originates from a wind blown off of a viscous accretion disk. We also show that GRB's likely contribute appreciably to the galactic inventory of {sup 42}Ca, {sup 45}Sc, {sup 46}Ti, {sup 49}Ti, {sup 63}Cu, and may be an important site for the production of {sup 64}Zn.

  4. Delta Dental Claim Form | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Delta Dental Claim Form PDF icon 2010_DeltaDental_claimform

  5. Direct Deposit Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Direct Deposit Form Direct Deposit Form Direct Deposit Form (66.61 KB) More Documents & Publications Employee In-Processing Forms Agreement for Minority Financial Institutions Participation in the Bank Deposit Financial Assistance Program Agreement for Minority Financial Institutions Participation in the Bank Deposit Financial Assistance Program

  6. Product Information Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Product Information Form Product Information Form When planning to present a new product to the EERE Product Governance Team, complete this product information form and email it to ee.communications@ee.doe.gov. Product Information Form (52.52 KB) More Documents & Publications Identity Guidelines for the Office of Energy Efficiency and Renewable Energy Apply for Technical Assistance EERE Successes Submission Template

  7. Microsoft Word - Metrology Req form411.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Metrology Request Form ( Scanning Electron Microscopy, Optical Profilometry,) Personal Contact Information : Date: Name: Phone :...

  8. Closeout Forms: Patent Certification | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Closeout Forms: Patent Certification Closeout Forms: Patent Certification Closeout forms for the financial opportunities process. Patent Certification (DOE F2050.11) (71 KB) Patent Certification Instructions and Example (66.93 KB) More Documents & Publications DOE F 2050.11 C:\Forms\DOE F 2050.11.cdr Patent Certification

  9. Transuranic and Low-Level Boxed Waste Form Nondestructive Assay Technology Overview and Assessment

    SciTech Connect (OSTI)

    G. Becker; M. Connolly; M. McIlwain

    1999-02-01

    The Mixed Waste Focus Area (MWFA) identified the need to perform an assessment of the functionality and performance of existing nondestructive assay (NDA) techniques relative to the low-level and transuranic waste inventory packaged in large-volume box-type containers. The primary objectives of this assessment were to: (1) determine the capability of existing boxed waste form NDA technology to comply with applicable waste radiological characterization requirements, (2) determine deficiencies associated with existing boxed waste assay technology implementation strategies, and (3) recommend a path forward for future technology development activities, if required. Based on this assessment, it is recommended that a boxed waste NDA development and demonstration project that expands the existing boxed waste NDA capability to accommodate the indicated deficiency set be implemented. To ensure that technology will be commercially available in a timely fashion, it is recommended this development and demonstration project be directed to the private sector. It is further recommended that the box NDA technology be of an innovative design incorporating sufficient NDA modalities, e.g., passive neutron, gamma, etc., to address the majority of the boxed waste inventory. The overall design should be modular such that subsets of the overall NDA system can be combined in optimal configurations tailored to differing waste types.

  10. Extension of Chern-Simons forms

    SciTech Connect (OSTI)

    Konitopoulos, Spyros; Savvidy, George

    2014-06-15

    We investigate metric independent, gauge invariant, and closed forms in the generalized Yang-Mills (YM) theory. These forms are polynomial on the corresponding fields strength tensors curvature forms and are analogous to the Pontryagin-Chern densities in the YM gauge theory. The corresponding secondary characteristic classes have been expressed in integral form in analogy with the Chern-Simons form. Because they are not unique, the secondary forms can be dramatically simplified by the addition of properly chosen differentials of one-step-lower-order forms. Their gauge variation can also be found yielding the potential anomalies in the gauge field theory.

  11. Sample Forms | National Nuclear Security Administration | (NNSA)

    National Nuclear Security Administration (NNSA)

    Sample Forms U.S. Department of Energy / U.S. Nuclear Regulatory Commission Nuclear Materials Management & Safeguards System Sample Forms The below completed example forms contain "dummy" data for information purposes. For current up to date blank forms please go to the DOE/NRC forms link located on the NMMSS information page. Sample 740s DOE/NRC Form 740M Sample 742s and 742Cs 742 Example 1 Example 1A Example 2 Example 3 Example 3A Example 4 DOE/NRC Form 742 742C Example 1 Example

  12. Inventory of current environmental monitoring projects in the US-Canadian transboundary region

    SciTech Connect (OSTI)

    Glantz, C.S.; Ballinger, M.Y.; Chapman, E.G.

    1986-05-01

    This document presents the results of a study commissioned to survey and summarize major environmental monitoring projects in the US-Canadian transboundary region. Projects with field sites located within 400 km (250 mi) of the border and active after 1980 were reviewed. The types of projects included: ambient air-quality monitoring, ambient water-quality monitoring, deposition monitoring, forest/vegetation monitoring and research, soil studies, and ecosystem studies. Ecosystem studies included projects involving the measurement of parameters from more than one monitoring category (e.g., studies that measured both water and soil chemistry). Individual descriptions were formulated for 184 projects meeting the spatial and temporal criteria. Descriptions included the official title for the project, its common abbreviation, program emphasis, monitoring site locations, time period conducted, parameters measured, protocols employed, frequency of sample collection, data storage information, and the principal contact for the project. A summary inventory subdivided according to the six monitoring categories was prepared using a computerized data management system. Information on major centralized data bases in the field of environmental monitoring was also obtained, and summary descriptions were prepared. The inventory and data base descriptions are presented in appendices to this document.

  13. Emissions Inventory Report Summary for Los Alamos National Laboratory for Calendar Year 2006

    SciTech Connect (OSTI)

    Ecology and Air Quality Group

    2007-09-28

    Los Alamos National Laboratory (LANL) is subject to annual emissions reporting requirements for regulated air pollutants under Title 20 of the New Mexico Administrative Code, Chapter 2, Part 73 (20.2.73 NMAC), Notice of Intent and Emissions Inventory Requirements. The applicability of the requirements is based on the Laboratory's potential to emit 100 tons per year of suspended particulate matter, nitrogen oxides, carbon monoxide, sulfur oxides, or volatile organic compounds. Additionally, on April 30, 2004, LANL was issued a Title V Operating Permit from the New Mexico Environment Department, Air Quality Bureau, under 20.2.70 NMAC. Modification Number 1 to this Title V Operating Permit was issued on June 15, 2006 (Permit No P-100M1) and includes emission limits and operating limits for all regulated sources of air pollution at LANL. The Title V Operating Permit also requires semi-annual emissions reporting for all sources included in the permit. This report summarizes both the annual emissions inventory reporting and the semi-annual emissions reporting for LANL for calendar year 2006. LANL's 2006 emissions are well below the emission limits in the Title V Operating Permit.

  14. Emissions inventory report summary for Los Alamos National Laboratory for calendar year 2008

    SciTech Connect (OSTI)

    Ecology and Air Quality Group

    2009-10-01

    Los Alamos National Laboratory (LANL) is subject to annual emissions reporting requirements for regulated air pollutants under Title 20 of the New Mexico Administrative Code, Chapter 2, Part 73 (20.2.73 NMAC), Notice of Intent and Emissions Inventory Requirements. The applicability of the requirements is based on the Laboratory’s potential to emit 100 tons per year of suspended particulate matter, nitrogen oxides, carbon monoxide, sulfur oxides, or volatile organic compounds. Additionally, on April 30, 2004, LANL was issued a Title V Operating Permit from the New Mexico Environment Department/Air Quality Bureau, under 20.2.70 NMAC. This permit was modified and reissued on July 16, 2007. This Title V Operating Permit (Permit No. P-100M2) includes emission limits and operating limits for all regulated sources of air pollution at LANL. The Title V Operating Permit also requires semiannual emissions reporting for all sources included in the permit. This report summarizes both the annual emissions inventory reporting and the semiannual emissions reporting for LANL for calendar year 2008. LANL’s 2008 emissions are well below the emission limits in the Title V Operating Permit.

  15. Emissions Inventory Report Summary for Los Alamos National Laboratory for Calendar Year 2009

    SciTech Connect (OSTI)

    Environmental Stewardship Group

    2010-10-01

    Los Alamos National Laboratory (LANL) is subject to annual emissions reporting requirements for regulated air pollutants under Title 20 of the New Mexico Administrative Code, Chapter 2, Part 73 (20.2.73 NMAC), Notice of Intent and Emissions Inventory Requirements. The applicability of the requirements is based on the Laboratory's potential to emit 100 tons per year of suspended particulate matter, nitrogen oxides, carbon monoxide, sulfur oxides, or volatile organic compounds. Additionally, on April 30, 2004, LANL was issued a Title V Operating Permit from the New Mexico Environment Department/Air Quality Bureau, under 20.2.70 NMAC. This permit was modified and reissued on July 16, 2007. This Title V Operating Permit (Permit No. P-100M2) includes emission limits and operating limits for all regulated sources of air pollution at LANL. The Title V Operating Permit also requires semiannual emissions reporting for all sources included in the permit. This report summarizes both the annual emissions inventory reporting and the semiannual emissions reporting for LANL for calendar year 2009. LANL's 2009 emissions are well below the emission limits in the Title V Operating Permit.

  16. PLANET HUNTERS: ASSESSING THE KEPLER INVENTORY OF SHORT-PERIOD PLANETS

    SciTech Connect (OSTI)

    Schwamb, Megan E.; Lintott, Chris J.; Lynn, Stuart; Smith, Arfon M.; Simpson, Robert J.; Fischer, Debra A.; Giguere, Matthew J.; Brewer, John M.; Parrish, Michael; Schawinski, Kevin

    2012-08-01

    We present the results from a search of data from the first 33.5 days of the Kepler science mission (Quarter 1) for exoplanet transits by the Planet Hunters citizen science project. Planet Hunters enlists members of the general public to visually identify transits in the publicly released Kepler light curves via the World Wide Web. Over 24,000 volunteers reviewed the Kepler Quarter 1 data set. We examine the abundance of {>=}2 R{sub Circled-Plus} planets on short-period (<15 days) orbits based on Planet Hunters detections. We present these results along with an analysis of the detection efficiency of human classifiers to identify planetary transits including a comparison to the Kepler inventory of planet candidates. Although performance drops rapidly for smaller radii, {>=}4 R{sub Circled-Plus} Planet Hunters {>=}85% efficient at identifying transit signals for planets with periods less than 15 days for the Kepler sample of target stars. Our high efficiency rate for simulated transits along with recovery of the majority of Kepler {>=}4 R{sub Circled-Plus} planets suggests that the Kepler inventory of {>=}4 R{sub Circled-Plus} short-period planets is nearly complete.

  17. Emissions Inventory Report Summary for Los Alamos National Laboratory for Calendar Year 2004

    SciTech Connect (OSTI)

    M. Stockton

    2005-10-01

    Los Alamos National Laboratory (LANL) is subject to annual emissions reporting requirements for regulated air pollutants under Title 20 of the New Mexico Administrative Code, Chapter 2, Part 73 (20.2.73 NMAC), ''Notice of Intent and Emissions Inventory Requirements''. The applicability of the requirements is based on the Laboratory's potential to emit 100 tons per year of suspended particulate matter, nitrogen oxides, carbon monoxide, sulfur oxides, or volatile organic compounds. Additionally, on April 30, 2004, LANL was issued a Title V Operating Permit from the New Mexico Environment Department, Air Quality Bureau, under 20.2.70 NMAC. This Title V Operating Permit (Permit No. P-100) includes emission limits and operating limits for all regulated sources of air pollution at LANL. The Title V Operating Permit also requires semi-annual emissions reporting for all sources included in the permit. This report summarizes both the annual emissions inventory reporting and the semi-annual emissions reporting for LANL for calendar year 2004. LANL's 2004 emissions are well below the emission limits in the Title V Operating Permit.

  18. ORPS User Registration Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    User Registration Form ORPS User Registration Form September 1, 2015 Operational Event Information Systems Registration Form For Occurrence Reporting and Processing System ORPS User Registration Form (486.14 KB) More Documents & Publications ORPS Facility Registration Form Occurrence Reporting and Processing System (ORPS) - PISA: TRU Waste Drums Containing Treated Nitrate Salts May Challenge the Safety Analysis Microsoft Word - CHAP02ESH _REVISED1_3.doc

  19. Pre-form ceramic matrix composite cavity and method of forming and method of forming a ceramic matrix composite component

    DOE Patents [OSTI]

    Monaghan, Philip Harold; Delvaux, John McConnell; Taxacher, Glenn Curtis

    2015-06-09

    A pre-form CMC cavity and method of forming pre-form CMC cavity for a ceramic matrix component includes providing a mandrel, applying a base ply to the mandrel, laying-up at least one CMC ply on the base ply, removing the mandrel, and densifying the base ply and the at least one CMC ply. The remaining densified base ply and at least one CMC ply form a ceramic matrix component having a desired geometry and a cavity formed therein. Also provided is a method of forming a CMC component.

  20. Toxic Substances Control Act (TSCA) chemical substances inventory: PMN number to EPA accession number link (for microcomputers). Data file

    SciTech Connect (OSTI)

    1995-11-01

    The PMN Number to EPA Accession Number Link Diskette provides a cross-reference of these numbers for commenced PMNs on the confidential portion of the TSCA Master Inventory File. Neither this cross-reference nor the additional information included is TSCA Confidential Business Information. Provided on the diskette for each confidential commenced PMN are the PMN Case Number, EPA Accession Number, Generic Name, and EPA special flags. The sequence of the file is in ascending PMN Case Number order with `P` case numbers sorted first, followed by `Y` case numbers. For more detailed information on the confidential portion of the TSCA Inventory, including generic names, users can consult the introductory material of the printed TSCA Inventory: 1985 Edition and its 1990 Supplement. New versions of this file may be issued in the future. No search software is provided with this DOS formatted diskette.

  1. Toxic Substances Control Act (TSCA) chemical substances inventory: PMN number to EPA accession number link (for microcomputers). Data file

    SciTech Connect (OSTI)

    Not Available

    1994-05-01

    The PMN Number to EPA Accession Number Link Diskette provides a cross-reference of these numbers for commenced PMNs on the confidential portion of the Toxic Substances Control Act (TSCA) Master Inventory File. Neither this cross-reference nor the additional information included is TSCA Confidential Business Information. Provided on the diskette for each confidential commenced PMN are the PMN Case Number, EPA Accession Number, Generic Name, and EPA special flags. For more detailed information on the confidential portion of the TSCA Inventory, including generic names, users can consult the introductory material of the printed TSCA Inventory: 1985 Edition and its 1990 Supplement. New versions of this file may be issued in the future.

  2. Environmental Protection Department`s well inventory: Includes current and past monitoring (through the second quarter of 1990)

    SciTech Connect (OSTI)

    Rogers, C.D.

    1990-11-01

    This report is an inventory of the wells contained in Environmental Protection Department /Environmental Monitoring Section (EPD/EMS) documents since the startup of the Savannah River Site (SRS) and includes wells monitored by special request and SRS research wells. All wells listed in this inventory are monitoring wells unless otherwise indicated. The purpose of this report is as follows: to provide a historical record of the wells that EPD/EMS has monitored, to provide a document containing a list of wells that are currently in the EPD/EMS Groundwater Monitoring Program, and to provide pertinent information about all wells listed in EPD/EMS documents

  3. Form W-8 BEN (Rev. February 2014)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    W-8BEN (Rev. February 2014) Department of the Treasury Internal Revenue Service ... Entities must use Form W-8BEN-E. Information about Form W-8BEN and its separate ...

  4. Paperclips Supply Store Forms | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Catalog Order Form for Non-Stocked or Specialty Items For any non-stocked or special item that needs to be ordered, the Catalog Order Form (pdf) needs to be filled in. All supplies...

  5. 2011 Form EIA-63A Instructions

    Gasoline and Diesel Fuel Update (EIA)

    U. S. DEPARTMENT OF ENERGY Form Approved U.S. ENERGY INFORMATION ADMINISTRATION OMB No. 1905-0196 Washington, DC 20585 Expires: 12312013 FORM EIA-63A ANNUAL SOLAR THERMAL ...

  6. Sources: Energy Information Administration, Form EIA-182,

    U.S. Energy Information Administration (EIA) Indexed Site

    "Domestic Crude Oil First Purchase Report"; Form EIA-856, "Monthly Foreign Crude Oil Acquisition Report"; and Form EIA-14, "Refiners' Monthly Cost Report." 0 6 12 18 24 30 J F M A...

  7. CSLB ROW Forms | Open Energy Information

    Open Energy Info (EERE)

    various forms and information related to surface Rights of Way on or across state trust lands. Published NA Year Signed or Took Effect 2014 Legal Citation CSLB ROW Forms DOI...

  8. Form:Buildings Publication | Open Energy Information

    Open Energy Info (EERE)

    name already exists, you will be sent to a form to edit that page. Create or edit Retrieved from "http:en.openei.orgwindex.php?titleForm:BuildingsPublication&oldid270103...

  9. Form:Buildings Model | Open Energy Information

    Open Energy Info (EERE)

    with that name already exists, you will be sent to a form to edit that page. Create or edit Retrieved from "http:en.openei.orgwindex.php?titleForm:BuildingsModel&oldid270041...

  10. Texas GLO Coastal Forms | Open Energy Information

    Open Energy Info (EERE)

    Coastal Forms Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: Texas GLO Coastal FormsLegal Abstract The Texas General Land Office...

  11. TCEQ Water Forms | Open Energy Information

    Open Energy Info (EERE)

    Water Forms Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: TCEQ Water FormsLegal Abstract The Texas Commission on Environmental...

  12. ADEQ Water Quality Forms | Open Energy Information

    Open Energy Info (EERE)

    ADEQ Water Quality Forms Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: ADEQ Water Quality FormsLegal Abstract The Arizona...

  13. ADNR Water Forms | Open Energy Information

    Open Energy Info (EERE)

    ADNR Water Forms Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: ADNR Water FormsLegal Abstract The Alaska Department of Natural...

  14. Form 2D | Open Energy Information

    Open Energy Info (EERE)

    D Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- Permit ApplicationPermit Application: Form 2DLegal Abstract Form 2D: Application for Permit to...

  15. EIA - 2008 New Electric Power Forms

    U.S. Energy Information Administration (EIA) Indexed Site

    industry. figure showing what electricity forms merge into the new forms Click for more information on the New EIA-860 Click for more information on the New EIA-923 Resources to ...

  16. Two Forms of Identification | Department of Energy

    Energy Savers [EERE]

    Two Forms of Identification (95.07 KB) More Documents & Publications Self-Identification of Disability LNG Exports by Truck out of the U.S. Form LNG Imports by Truck into the U.S. ...

  17. Fermilab at Work | Manuals and Forms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Policy Guide Engineering Manual Engineering Manual Engineering Manual Appendices Risk Assessment Spreadsheet Engineering Manual Rollout Teamcenter Rollout Facilities Request Form...

  18. EEO Intake Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    EEO Intake Form EEO Intake Form Download and fill out this form to start the process for Equal Employment Opportunity complaints at the Department of Energy. For more information about the EEO process, visit this site. To get in touch with our Office of Civil Rights, call (202) 586-2218. DOE EEO Intake Form 2016 (395.3 KB) More Documents & Publications Equal Employment Opportunity Intake Process DOE F 1600.2 DOE F 1600.1

  19. CAIRS Registration Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications ORPS User Registration Form Headquarters Facilities Master Security Plan - Chapter 13, Controlled Unclassified Information Fire Protection System ...

  20. CONFIGURATION CHANGE PROPOSAL FORM | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CONFIGURATION CHANGE PROPOSAL FORM CONFIGURATION CHANGE PROPOSAL FORM This form is used for sharing information on Domain Name Server (DNS) changes, new requirements, modifications or enhancements within the DOE Headquarters Programmatic and Office Management Areas. This form is used for sharing information on Domain Name Server (DNS) changes, new requirements, modifications or enhancements within the DOE Headquarters Programmatic and Office Management Areas. (40.5 KB) More Documents &

  1. Opinion of Counsel Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Opinion of Counsel Form Opinion of Counsel Form For use with natural gas authorization filings Opinion of Counsel Form - Natural Gas Regulation (7.1 KB) More Documents & Publications Listing of DOE/FE Authorizations Issued in 2013 Listing of DOE/FE Authorizations Issued in 2014 Clean Energy - FE Dkt No. 14-54-LNG (FTA)

  2. Microsoft Word - EMBOSSING REQUEST FORM4611.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    EMBOSSING REQUEST FORM Please read attached sheet before completing this form Personal Contact Information Date: ____/____/_____ Name: ___________________________ Phone #: _________________ Department: __________ PRN or Acct #: _____________________ E-mail: _____________________________ Technical Information Please use separate forms for requests involving different mold inserts or embossing materials. Mold Insert Name: ___________________________________________________________ Mold Insert

  3. Inventory of federally-funded projects and programs related to anthracite

    SciTech Connect (OSTI)

    1980-06-01

    This report is a compilation of descriptions of federal projects and programs that are concerned in some way with anthracite. It is the first inventory of its type to be prepared. Among the projects and programs described are those completed in the latter half of 1979, those that are currently active, and others that will start soon. Of the 43 projects described, 8 involve research, development, and demonstration (RD and D) of technologies aimed at enhancing the use of anthracite or anthracite mining waste; 6 address environmental problems associated with anthracite mining or use; 9 provide information on the anthracite industry; 16 involve studies related to anthracite; and 4 are miscellaneous projects and programs. These projects and programs represent federal government expenditures of $27.1 million, excluding current military purchases of anthracite for use in European bases of $33.6 million, and US Bureau of Mines mined land demonstration and reclamation projects of $38.3 million.

  4. 2013 Idaho National Laboratory Water Use Report and Comprehensive Well Inventory (Revision 22)

    SciTech Connect (OSTI)

    Mike Lewis

    2014-06-01

    This 2013 Idaho National Laboratory Water Use Report and Comprehensive Well Inventory (Revision 22) provides water use information for production and potable water wells at the Idaho National Laboratory for Calendar Year 2013. It also provides detailed information for new, modified, and decommissioned wells and holes. Two new wells were drilled and completed in Calendar Year 2013. No modifications were performed on any wells. Seven wells were decommissioned in Calendar Year 2013. Detailed construction information for the new and decommissioned wells is provided. Location maps are included, provided survey information was available. This report is being submitted in accordance with the Water Rights Agreement between the State of Idaho and the United States, for the United States Department of Energy (dated 1990) and the subsequent Partial Decree for Water Right 34-10901 issued June 20, 2003.

  5. User perspectives on a unified data base connecting power industry inventories

    SciTech Connect (OSTI)

    Chipkin, M.; Goettsch, H.; Hilburn, R.; Kelly, J.

    1991-01-01

    Spare-parts availability is a great concern to nuclear utility managers. This paper presents a user report on the application of a very large unified data base enabling retrieval of spare parts inventory data and reference data among power systems firms and their suppliers. The system used to store and retrieve these data was first tested by utilities as a prototype in 1989 and has since steadily expanded and is gaining acceptance by major utilities and industrial power systems users. The mainframe and personal computer (PC)-based system is described, and user experiences are discussed in this paper as well. The use of this large, widely accessible parts data base is an important new development that significantly benefits materials management and plant operations.

  6. 2010 Idaho National Laboratory Water Use Report and Comprehensive Well Inventory (Revision 19)

    SciTech Connect (OSTI)

    Mike Lewis

    2011-06-01

    This 2010 Idaho National Laboratory Water Use Report and Comprehensive Well Inventory (Revision 19) provides water use information (monthly annual average and total annual volume) for production and potable water wells at the Idaho National Laboratory for Calendar Year 2010. It also provides detailed information for new, modified, and abandoned (decommissioned) wells and holes. Five new wells were drilled and completed in the latter part of Calendar Years 2009 and 2010. Two wells were modified in Calendar Year 2010 and 66 wells and boreholes reported as abandoned (decommissioned). Detailed construction information for the new and modified wells, along with abandonment information for older wells, is provided. Location maps are provided if survey information was available. This report is being submitted in accordance with the Water Rights Agreement between the State of Idaho and the United States, for the United States Department of Energy (dated 1990) and the subsequent Partial Decree for Water Right 34-10901 issued June 20, 2003.

  7. 2011 Idaho National Laboratory Water Use Report and Comprehensive Well Inventory (Revision 20)

    SciTech Connect (OSTI)

    Renee Bowser

    2012-06-01

    This 2011 Idaho National Laboratory Water Use Report and Comprehensive Well Inventory (Revision 20) provides water use information (monthly annual average and total annual volume) for production and potable water wells at the Idaho National Laboratory for Calendar Year 2011. It also provides detailed information for new, modified, and abandoned (decommissioned) wells and holes. One new well was drilled and completed and one well was modified in Calendar Year 2011. A total of 14 wells and boreholes were reported as decommissioned. Detailed construction information for the new and modified wells is provided. Details are provided for the wells and boreholes that have been decommissioned, and if available, construction diagrams. Location maps are included, provided survey information was available. This report is being submitted in accordance with the Water Rights Agreement between the State of Idaho and the United States, for the United States Department of Energy (dated 1990) and the subsequent Partial Decree for Water Right 34-10901 issued June 20, 2003.

  8. LIFE CYCLE INVENTORY ANALYSIS IN THE PRODUCTION OF METALS USED IN PHOTOVOLTAICS.

    SciTech Connect (OSTI)

    FTHENAKIS,V.M.; KIM, H.C.; WANG, W.

    2007-03-30

    Material flows and emissions in all the stages of production of zinc, copper, aluminum, cadmium, indium, germanium, gallium, selenium, tellurium, and molybdenum were investigated. These metals are used selectively in the manufacture of solar cells, and emission and energy factors in their production are used in the Life Cycle Analysis (LCA) of photovoltaics. Significant changes have occurred in the production and associated emissions for these metals over the last 10 years, which are not described in the LCA databases. Furthermore, emission and energy factors for several of the by-products of the base metal production were lacking. This report aims in updating the life-cycle inventories associated with the production of the base metals (Zn, Cu, Al, Mo) and in defining the emission and energy allocations for the minor metals (Cd, In, Ge, Se, Te and Ga) used in photovoltaics.

  9. Inventory of power plants in the United States as of January 1, 1997

    SciTech Connect (OSTI)

    1997-12-01

    The Inventory of Power Plants in the United States provides annual statistics on generating units operated by electric utilities in the United States (the 50 States and the District of Columbia). Statistics presented in this report reflect the status of generating units as of January 1, 1997. The publication also provides a 10-yr outlook for generating unit additions. This report is prepared annually by the Coal and Electric Data and Renewables Division; Office of Coal, Nuclear, Electric and Alternate Fuels; Energy Information Administration (EIA); U.S. Department of Energy (DOE). Data summarized in this report are useful to a wide audience including Congress; Federal and State agencies; the electric utility industry; and the general public. Data presented in this report were assembled and published by the EIA to fulfill its data collection and dissemination responsibilities as specified in the Federal Energy Administration Act of 1974 (Public Law 93-275) as amended.

  10. Plutonium Discharge Rates and Spent Nuclear Fuel Inventory Estimates for Nuclear Reactors Worldwide

    SciTech Connect (OSTI)

    Brian K. Castle; Shauna A. Hoiland; Richard A. Rankin; James W. Sterbentz

    2012-09-01

    This report presents a preliminary survey and analysis of the five primary types of commercial nuclear power reactors currently in use around the world. Plutonium mass discharge rates from the reactors spent fuel at reload are estimated based on a simple methodology that is able to use limited reactor burnup and operational characteristics collected from a variety of public domain sources. Selected commercial reactor operating and nuclear core characteristics are also given for each reactor type. In addition to the worldwide commercial reactors survey, a materials test reactor survey was conducted to identify reactors of this type with a significant core power rating. Over 100 material or research reactors with a core power rating >1 MW fall into this category. Fuel characteristics and spent fuel inventories for these material test reactors are also provided herein.

  11. Inventory of power plants in the United States as of January 1, 1996

    SciTech Connect (OSTI)

    1996-12-01

    The Inventory of Power Plants in the United States provides annual statistics on generating units operated by electric utilities in the United States (the 50 States and the District of Columbia). Statistics presented in this report reflect the status of generating units as of January 1, 1996. The publication also provides a 10-year outlook for generating unit additions. This report is prepared annually by the Coal and Electric Data and Renewables Division; Office of Coal, Nuclear, Electric and Alternate Fuels; Energy Information Administration (EIA); U.S. Department of Energy (DOE). Data summarized in this report are useful to a wide audience including Congress; Federal and State agencies; the electric utility industry; and the general public. Data presented in this report were assembled and published by the EIA to fulfill its data collection and dissemination responsibilities as specified in the Federal Energy Administration Act of 1974 as amended.

  12. Inventory of power plants in the United States as of January 1, 1998

    SciTech Connect (OSTI)

    1998-12-01

    The Inventory of Power Plants in the United States provides annual statistics on generating units operated by electric utilities in the US (the 50 States and the District of Columbia). Statistics presented in this report reflect the status of generating units as of January 1, 1998. The publication also provides a 10-year outlook for generating unit additions and generating unit changes. This report is prepared annually by the Energy Information Administration (EIA). Data summarized in this report are useful to a wide audience. This is a report of electric utility data; in cases where summary data or nonconfidential data of nonutilities are presented, it is specifically noted as nonutility data. 19 figs., 36 tabs.

  13. 2014 Idaho National Laboratory Water Use Report and Comprehensive Well Inventory (Revision 23)

    SciTech Connect (OSTI)

    Lewis, Mike

    2015-06-01

    This 2014 Idaho National Laboratory Water Use Report and Comprehensive Well Inventory (Revision 23) provides water use information for production and potable water wells at the Idaho National Laboratory for Calendar Year 2014. It also provides detailed information for new, modified, and decommissioned wells and holes. One new well was drilled and completed in Calendar Year 2014. No modifications were performed on any wells. No wells were decommissioned in Calendar Year 2014. Detailed construction information and a location map for the new well is provided. This report is being submitted in accordance with the Water Rights Agreement between the State of Idaho and the United States, for the United States Department of Energy (dated 1990), the subsequent Partial Decree for Water Right 34-10901 issued June 20, 2003, and the Final Unified Decree issued August 26, 2014.

  14. Analysis of 1994 Air Force toxic release inventory reporting. Master`s thesis

    SciTech Connect (OSTI)

    Pollock, B.A.

    1995-12-01

    The purpose of this research is to analyze the Air Force`s 1994 Toxic Release Inventory data. Statistical tests were used to meet the following research objectives: (1) review the CY 94 data to determine which chemicals were most often reported and which bases and major commands had the most releases in terms of the number of chemicals reported and the amount of chemicals reported and (2) investigate factors which could influence the reporting status of a facility. An analysis of a survey of Air Force facilities indicated that two factors had an influence on the reporting status of Air Force facilities: (1) whether the TRI point of contact had confidence in the completeness of the data used for threshold computations and (2) whether the primary database used for threshold computations was the Standard Base Supply System.

  15. Electric Vehicle Preparedness: Task 1, Assessment of Fleet Inventory for Marine Corps Base Camp Lejeune

    SciTech Connect (OSTI)

    Schey, Stephen; Francfort, Jim

    2015-01-01

    Several U.S. Department of Defense-based studies were conducted to identify potential U.S. Department of Defense transportation systems that are strong candidates for introduction or expansion of plug-in electric vehicles (PEVs). Task 1 included a survey of the inventory of non-tactical fleet vehicles at the Marine Corps Base Camp Lejeune (MCBCL) to characterize the fleet. This information and characterization will be used to select vehicles for monitoring that takes place during Task 2. This monitoring involves data logging of vehicle operation in order to identify the vehicle’s mission and travel requirements. Individual observations of these selected vehicles provide the basis for recommendations related to PEV adoption. It also identifies whether a battery electric vehicle or plug-in hybrid electric vehicle (collectively referred to as PEVs) can fulfill the mission requirements and provides observations related to placement of PEV charging infrastructure.

  16. Assessment of Fleet Inventory for Naval Air Station Whidbey Island. Task 1

    SciTech Connect (OSTI)

    Schey, Stephen; Francfort, Jim

    2015-06-01

    Task 1includes a survey of the inventory of non-tactical fleet vehicles at Naval Air Station Whidbey Island (NASWI) to characterize the fleet. This information and characterization are used to select vehicles for monitoring that takes place during Task 2. This monitoring involves data logging of vehicle operation in order to identify the vehicle’s mission and travel requirements. Individual observations of these selected vehicles provide the basis for recommendations related to PEV adoption. It also identifies whether a battery electric vehicle or plug-in hybrid electric vehicle (collectively referred to as PEVs) can fulfill the mission requirements and provide observations related to placement of PEV charging infrastructure. This report provides the results of the assessments and observations of the current non-tactical fleet, fulfilling the Task 1 requirements.

  17. U.S./Mexico Border environmental study toxics release inventory data, 1988--1992

    SciTech Connect (OSTI)

    O`Brien, R.F.; LoPresti, C.A.

    1996-02-01

    This is a report on industrial toxic chemical releases and transfers based on information reported to the Toxics Release Inventory (TRI), a database maintained by the USEPA. This document discusses patterns of toxic chemical releases to the atmosphere, to water, to the land, and to underground injection; and transfers of toxic chemicals to Publicly Owned Treatment Works (POTW), and for disposal, treatment and other off-site transfers during the TRI reporting years 1988--1992. Geographic coverage is limited to the US side of the ``Border Area``, the geographic area situated within 100 km of the US/Mexico international boundary. A primary purpose of this study is to provide background information that can be used in the future development of potential ``indicator variables`` for tracking environmental and public health status in the Border Area in conjunction with the implementation of the North American Free Trade Agreement (NAFTA).

  18. Vegetation Description, Rare Plant Inventory, and Vegetation Monitoring for Craig Mountain, Idaho.

    SciTech Connect (OSTI)

    Mancuso, Michael; Moseley, Robert

    1994-12-01

    The Craig Mountain Wildlife Mitigation Area was purchased by Bonneville Power Administration (BPA) as partial mitigation for wildlife losses incurred with the inundation of Dworshak Reservoir on the North Fork Clearwater River. Upon completion of the National Environmental Protection Act (NEPA) process, it is proposed that title to mitigation lands will be given to the Idaho Department of Fish and Game (IDFG). Craig Mountain is located at the northern end of the Hells Canyon Ecosystem. It encompasses the plateau and steep canyon slopes extending from the confluence of the Snake and Salmon rivers, northward to near Waha, south of Lewiston, Idaho. The forested summit of Craig Mountain is characterized by gently rolling terrain. The highlands dramatically break into the canyons of the Snake and Salmon rivers at approximately the 4,700 foot contour. The highly dissected canyons are dominated by grassland slopes containing a mosaic of shrubfield, riparian, and woodland habitats. During the 1993 and 1994 field seasons, wildlife, habitat/vegetation, timber, and other resources were systematically inventoried at Craig Mountain to provide Fish and Game managers with information needed to draft an ecologically-based management plan. The results of the habitat/vegetation portion of the inventory are contained in this report. The responsibilities for the Craig Mountain project included: (1) vegetation data collection, and vegetation classification, to help produce a GIS-generated Craig Mountain vegetation map, (2) to determine the distribution and abundance of rare plants populations and make recommendations concerning their management, and (3) to establish a vegetation monitoring program to evaluate the effects of Fish and Game management actions, and to assess progress towards meeting habitat mitigation goals.

  19. Evaluating atmospheric CO2 inversions at multiple scales over a highly-inventoried agricultural landscape.

    SciTech Connect (OSTI)

    Schuh, Andrew E.; Lauvaux, Thomas; West, Tristram O.; Denning, A.; Davis, Kenneth J.; Miles, Natasha; Richardson, S. J.; Uliasz, Marek; Lokupitiya, Erandathie; Cooley, Dan; Andrews, Arlyn; Ogle, Stephen

    2013-05-01

    An intensive regional research campaign was conducted by the North American Carbon Program (NACP) in 2005 to study the carbon cycle of the highly productive agricultural regions of the Midwestern United States. Forty-_ve di_erent associated projects were spawned across _ve U.S. agencies over the course of nearly a decade involving hundreds of researchers. The primary objective of the project was to investigate the ability of atmospheric inversion techniques to use highly calibrated CO2 mixing ratio data to estimate CO2 exchange over the major croplands of the U.S. Statistics from densely monitored crop production, consisting primarily corn and soybeans, provided the backbone of a well-studied\\bottom up"flux estimate that was used to evaluate the atmospheric inversion results. Three different inversion systems, representing spatial scales varying from high resolution mesoscale, to continental, to global, coupled to different transport models and optimization techniques were compared to the bottom up" inventory estimates. The mean annual CO2-C sink for 2007 from the inversion systems ranged from 120 TgC to 170 TgC, when viewed across a wide variety of inversion setups, with the best" point estimates ranging from 145 TgC to 155 TgC. Inversion-based mean C sink estimates were generally slightly stronger, but statistically indistinguishable,from the inventory estimate whose mean C sink was 135 TgC. The inversion results showed temporal correlations at seasonal lengths while week to week correlations remained low. Comparisons were made between atmospheric transport yields of the two regional inversion systems, which despite having different influence footprints in space and time due to differences in underlying transport models and external forcings, showed similarity when aggregated in space and time.

  20. Tagging CO2 to Enable Quantitative Inventories of Geological Carbon Storage

    SciTech Connect (OSTI)

    Lackner, Klaus; Matter, Juerg; Park, Ah-Hyung; Stute, Martin; Carson, Cantwell; Ji, Yinghuang

    2014-06-30

    In the wake of concerns about the long term integrity and containment of sub-surface CO2 sequestration reservoirs, many efforts have been made to improve the monitoring, verification, and accounting methods for geo-sequestered CO2. Our project aimed to demonstrate the feasibility of a system designed to tag CO2 with carbon isotope 14C immediately prior to sequestration to a level that is normal on the surface (one part per trillion). Because carbon found at depth is naturally free of 14C, this tag would easily differentiate pre-existing carbon from anthropogenic injected carbon and provide an excellent handle for monitoring its whereabouts in the subsurface. It also creates an excellent handle for adding up anthropogenic carbon inventories. Future inventories in effect count 14C atoms. Accordingly, we have developed a 14C tagging system suitable for use at the part-per-trillion level. This system consists of a gas-exchange apparatus to make disposable cartridges ready for controlled injection into a fast flowing stream of pressurized CO2. We built a high-pressure injection and tagging system, and a 14C detection system. The disposable cartridge and injection system have been successfully demonstrated in the lab with a high-pressure flow reactor, as well as in the field at the CarbFix CO2 sequestration site in Iceland. The laser-based 14C detection system originally conceived has been shown to possess inadequate sensitivity for ambient levels. Alternative methods for detecting 14C, such as saturated cavity absorption ringdown spectroscopy and scintillation counting, may still be suitable. KEYWORDS