National Library of Energy BETA

Sample records for interval metering needed

  1. High resolution time interval meter

    DOE Patents [OSTI]

    Martin, A.D.

    1986-05-09

    Method and apparatus are provided for measuring the time interval between two events to a higher resolution than reliability available from conventional circuits and component. An internal clock pulse is provided at a frequency compatible with conventional component operating frequencies for reliable operation. Lumped constant delay circuits are provided for generating outputs at delay intervals corresponding to the desired high resolution. An initiation START pulse is input to generate first high resolution data. A termination STOP pulse is input to generate second high resolution data. Internal counters count at the low frequency internal clock pulse rate between the START and STOP pulses. The first and second high resolution data are logically combined to directly provide high resolution data to one counter and correct the count in the low resolution counter to obtain a high resolution time interval measurement.

  2. The Need for Essential Consumer Protections: Smart metering proposals...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    the move to time-based pricing. August 2010 More Documents & Publications Comments of Baltimore Gas & Electric Company The Need for Essential Consumer Protections: Smart Metering...

  3. The Need for Essential Consumer Protections: Smart Metering Proposals...

    Energy Savers [EERE]

    and the Move to Time-Based Pricing More Documents & Publications Comments of Baltimore Gas & Electric Company The Need for Essential Consumer Protections: Smart metering...

  4. Fuel Quality & Metering Current Status and Future Needs

    E-Print Network [OSTI]

    Fuel Quality & Metering Current Status and Future Needs DOE Tank Safety Workshop Sandia National with enforcing the quality standards for Gasoline, Diesel, Motor Oil, Coolants, Brake Fluid, ATF, and Hydrogen commercial weighing, measuring, or counting device. This includes all Retail Motor Fuel devices (California

  5. Metering Process

    Broader source: Energy.gov [DOE]

    Developing and implementing a metering plan is highly dependent on the individual facility's needs, mission, metering equipment, and available infrastructure. One size does not fit all.

  6. Net Metering

    Broader source: Energy.gov [DOE]

    Note: Illinois is currently undergoing a rulemaking that would change its existing net metering rules. The proposed rules include provisions clarifying virtual net metering policies, facilitating...

  7. Net Metering

    Broader source: Energy.gov [DOE]

    Kansas adopted the Net Metering and Easy Connection Act in May 2009, which established net metering for customers of investor-owned utilities (IOUs). 

  8. Net Metering

    Broader source: Energy.gov [DOE]

    Missouri enacted legislation in June 2007 requiring all electric utilities—investor-owned utilities, municipal utilities, and electric cooperatives—to offer net metering to customers with systems...

  9. Net Metering

    Broader source: Energy.gov [DOE]

    The ACC requires that net metering charges be assessed on a non-discriminatory basis. Any new or additional charges that would increase an eligible customer-generator's costs beyond those of other...

  10. Net Metering

    Broader source: Energy.gov [DOE]

    Iowa's statutes do not explicitly authorize the Iowa Utilities Board (IUB) to mandate net metering, but this authority is implicit through the board's enforcement of PURPA and Iowa Code § 476.41 ...

  11. Net Metering

    Office of Energy Efficiency and Renewable Energy (EERE)

    With these regulations, renewable energy systems with a capacity up to 25 kilowatts (kW) are eligible for net metering. Overall enrollment is limited to 1.5% of a utility's retail sales from the...

  12. Net Metering

    Broader source: Energy.gov [DOE]

    Nevada's original net-metering law for renewable-energy systems was enacted in 1997 and amended in 2001, 2003, 2005, 2007, 2011, 2013, and 2015. Systems up to one megawatt (MW) in capacity that...

  13. Hardware Metering: A Survey Farinaz Koushanfar

    E-Print Network [OSTI]

    -fabrication. Metering is particularly needed in the hori- zontal semiconductor business model where the design houses is a precursor for metering: In passive metering, each ICs is specifi- cally identified, either in terms of its passive and active hardware metering methods available. Electrical and Computer Engineering Department

  14. Saturation meter

    DOE Patents [OSTI]

    Gregurech, S.

    1984-08-01

    A saturation meter for use in a pressurized water reactor plant comprising a differential pressure transducer having a first and second pressure sensing means and an alarm. The alarm is connected to the transducer and is preset to activate at a level of saturation prior to the formation of a steam void in the reactor vessel.

  15. BPA Metering Services Editing and Estimating Procedures

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    be used to scale the estimated interval data with a shape projection applied. If SCADA data is available and has been mapped to the point of metering, it may be used for...

  16. Propeller Flow Meter 

    E-Print Network [OSTI]

    Enciso, Juan; Santistevan, Dean; Hla, Aung K.

    2007-10-01

    Propeller flow meters are commonly used to measure water flow rate. They can also be used to estimate irrigation water use. This publication explains how to select, install, read and maintain propeller flow meters....

  17. LADWP- Net Metering

    Broader source: Energy.gov [DOE]

    LADWP allows its customers to net meter their photovoltaic (PV), wind, and hybrid systems with a capacity of not more than one megawatt. LADWP will provide the necessary metering equipment unless...

  18. Metering Systems | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Systems Metering Systems A variety of metering systems are currently on the market for Federal facility implementation. The information below outlines common metering system...

  19. Use of Utility Interval Meters in an Industrial Energy Audit 

    E-Print Network [OSTI]

    Wallace, M.

    2007-01-01

    4 :00 A M 5: 00 A M 6: 00 AM 7: 00 AM 8: 00 AM 9 :00 AM 10: 0 0 A M 1 1: 00 A M 12 :00 P M 1: 0 0 P M 2: 00 P M 3: 00 P M 4: 00 PM 5: 0 0 P M 6: 0 0 P M 7 :00 PM 8: 00 P M 9: 00 P M 10 :00 P M 11: 00 P M KW Max Min Ave Max Count Figure 2... M 10:0 0 AM 11:0 0 A M 12:0 0 PM 1:00 P M 2:00 P M 3:00 P M 4:00 P M 5:00 P M 6:00 P M 7:00 P M 8:00 P M 9:00 P M 10:0 0 PM 11:0 0 P M KW -2000 -1500 -1000 -500 0 500 1000 1500 Del t a- KW Demand Delta Demand -665 +682 -1273 -1221 -913...

  20. Guam- Net Metering

    Broader source: Energy.gov [DOE]

    Eligibility and Availability In 2004, Guam enacted legislation requiring the Guam Power Authority (GPA) to allow net metering for customers with fuel cells, microturbines, wind energy, biomass, ...

  1. DC attenuation meter

    DOE Patents [OSTI]

    Hargrove, Douglas L.

    2004-09-14

    A portable, hand-held meter used to measure direct current (DC) attenuation in low impedance electrical signal cables and signal attenuators. A DC voltage is applied to the signal input of the cable and feedback to the control circuit through the signal cable and attenuators. The control circuit adjusts the applied voltage to the cable until the feedback voltage equals the reference voltage. The "units" of applied voltage required at the cable input is the system attenuation value of the cable and attenuators, which makes this meter unique. The meter may be used to calibrate data signal cables, attenuators, and cable-attenuator assemblies.

  2. Lesson Plan: Power Metering

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Power Metering Project Grades: 9-12 Topic: Energy Basics Owner: ACTS This educational material is brought to you by the U.S. Department of Energy's Office of Energy Efficiency and...

  3. Economics of Energy Metering 

    E-Print Network [OSTI]

    Duncan, J. D.

    1979-01-01

    become necessary to accurately measure energy usage (primarily fuel and steam) throughout the plant. There are currently several projects in the million dollar range to upgrade and add new metering to these flows. This paper will discuss the justification...

  4. Western Meter Policy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for the Real-Time Data that is not connected to the same CT source as the primary meter. Relay quality CTs are acceptable for the ADS. The ADS shall be transmitted via a second...

  5. PSEG Long Island- Net Metering

    Broader source: Energy.gov [DOE]

    Although PSEG Long Island’s net metering policy is not governed by the State’s net metering law, the provisions are similar to the State law. Net metering is available for residential, non-reside...

  6. Washington City Power- Net Metering

    Broader source: Energy.gov [DOE]

    Washington City adopted a net-metering program, including interconnection procedures, in January 2008.* Net metering is available to residential and commercial customers that generate electricity...

  7. Neutron dose equivalent meter

    DOE Patents [OSTI]

    Olsher, Richard H. (Los Alamos, NM); Hsu, Hsiao-Hua (Los Alamos, NM); Casson, William H. (Los Alamos, NM); Vasilik, Dennis G. (Los Alamos, NM); Kleck, Jeffrey H. (Menlo Park, CA); Beverding, Anthony (Foster City, CA)

    1996-01-01

    A neutron dose equivalent detector for measuring neutron dose capable of accurately responding to neutron energies according to published fluence to dose curves. The neutron dose equivalent meter has an inner sphere of polyethylene, with a middle shell overlying the inner sphere, the middle shell comprising RTV.RTM. silicone (organosiloxane) loaded with boron. An outer shell overlies the middle shell and comprises polyethylene loaded with tungsten. The neutron dose equivalent meter defines a channel through the outer shell, the middle shell, and the inner sphere for accepting a neutron counter tube. The outer shell is loaded with tungsten to provide neutron generation, increasing the neutron dose equivalent meter's response sensitivity above 8 MeV.

  8. Elbow mass flow meter

    DOE Patents [OSTI]

    McFarland, Andrew R. (College Station, TX); Rodgers, John C. (Santa Fe, NM); Ortiz, Carlos A. (Bryan, TX); Nelson, David C. (Santa Fe, NM)

    1994-01-01

    Elbow mass flow meter. The present invention includes a combination of an elbow pressure drop generator and a shunt-type mass flow sensor for providing an output which gives the mass flow rate of a gas that is nearly independent of the density of the gas. For air, the output is also approximately independent of humidity.

  9. Interval Linear Algebra

    E-Print Network [OSTI]

    W. B. Vasantha Kandasamy; Florentin Smarandache

    2010-12-08

    In this book we use only special types of intervals and introduce the notion of different types of interval linear algebras and interval vector spaces using the intervals of the form [0, a] where the intervals are from Zn or Z+ \\cup {0} or Q+ \\cup {0} or R+ \\cup {0}. A systematic development is made starting from set interval vector spaces to group interval vector spaces. Vector spaces are taken as interval polynomials or interval matrices or just intervals over suitable sets or semigroups or groups. Main feature of this book is the authors have given over 350 examples. This book has six chapters. Chapter one is introductory in nature. Chapter two introduces the notion of set interval linear algebras of type one and two. Set fuzzy interval linear algebras and their algebras and their properties are discussed in chapter three. Chapter four introduces several types of interval linear bialgebras and bivector spaces and studies them. The possible applications are given in chapter five. Chapter six suggests nearly 110 problems of all levels.

  10. Portable wastewater flow meter

    DOE Patents [OSTI]

    Hunter, Robert M. (320 S. Wilson Ave., Bozeman, MT 59715)

    1999-02-02

    A portable wastewater flow meter particularly adapted for temporary use at a single location in measuring the rate of liquid flow in a circular entrance conduit of a sewer manhole both under free flow and submerged, open channel conditions and under fill pipe, surcharged conditions, comprising an apparatus having a cylindrical external surface and an inner surface that constricts the flow through the apparatus in such a manner that a relationship exists between (1) the difference between the static pressure head of liquid flowing through the entrance of the apparatus and the static pressure head of liquid flowing through the constriction, and (2) the rate of liquid flow through the apparatus.

  11. Portable wastewater flow meter

    DOE Patents [OSTI]

    Hunter, Robert M. (320 S. Wilson Ave., Bozeman, MT 59715)

    1990-01-01

    A portable wastewater flow meter particularly adapted for temporary use at a single location in measuring the rate of liquid flow in a circular entrance conduit of a sewer manhole both under free flow and submerged, open channel conditions and under full pipe, surcharged conditions, comprising an apparatus having a cylindrical external surface and an inner surface that constricts the flow through the apparatus in such a manner that a relationship exists between (1) the difference between the static pressure head of liquid flowing through the entrance of the apparatus and the static pressure head of liquid flowing through the constriction, and (2) the rate of liquid flow through the apparatus.

  12. Electric Metering | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    The Forrestal electric meters provide daily read-outs and comparison of data on electricity consumption for overhead lighting and power outlets. The purpose is to measure...

  13. meters in CO2 euthanasia chambers. All CO2 euthanasia chambers in both

    E-Print Network [OSTI]

    George, Edward I.

    meters in CO2 euthanasia chambers. All CO2 euthanasia chambers in both the facilities, and durable flow meter to install in all of the CO2 chambers in all of the vivaria. When a specific model and laboratories will need flow meters. ULAR is currently in the process of identifying a cost-effective, accurate

  14. Gerson Recinos Onramp Metering System

    E-Print Network [OSTI]

    Kachroo, Pushkin

    Gerson Recinos Onramp Metering System Using Arduino and Processing Overview­ For this project I built an Onramp Metering System using Arduino and Processing. The Microcontroller used was Arduino (based on Atmel168) and the programming languages were Processing and Wiring (derivative

  15. Multiphase pumps and flow meters avoid platform construction

    SciTech Connect (OSTI)

    Elde, J.

    1999-02-01

    One of the newest wrinkles in efficiency in BP`s Eastern Trough Area Project (ETAP) is the system for moving multiphase oil, water and gas fluids from the Machar satellite field to the Marnock Central Processing Facility (CPF). Using water-turbine-driven multiphase pumps and multiphase flow meters, the system moves fluid with no need for a production platform. In addition, BP has designed the installation so it reduces and controls water coning, thereby increasing recoverable reserves. Both subsea multiphase booster stations (SMUBS) and meters grew out of extensive development work and experience at Framo Engineering AS (Framo) in multiphase meters and multiphase pump systems for subsea installation. Multiphase meter development began in 1990 and the first subsea multiphase meters were installed in the East Spar Project in Australia in 1996. By September 1998, the meters had been operating successfully for more than 1 year. A single multiphase meter installed in Marathon`s West Brae Project has also successfully operated for more than 1 year. Subsea meters for ETAP were installed and began operating in July 1998.

  16. Gamma radiation field intensity meter

    DOE Patents [OSTI]

    Thacker, L.H.

    1995-10-17

    A gamma radiation intensity meter measures dose rate of a radiation field. The gamma radiation intensity meter includes a tritium battery emitting beta rays generating a current which is essentially constant. Dose rate is correlated to an amount of movement of an electroscope element charged by the tritium battery. Ionizing radiation decreases the voltage at the element and causes movement. A bleed resistor is coupled between the electroscope support element or electrode and the ionization chamber wall electrode. 4 figs.

  17. Gamma radiation field intensity meter

    DOE Patents [OSTI]

    Thacker, L.H.

    1994-08-16

    A gamma radiation intensity meter measures dose rate of a radiation field. The gamma radiation intensity meter includes a tritium battery emitting beta rays generating a current which is essentially constant. Dose rate is correlated to an amount of movement of an electroscope element charged by the tritium battery. Ionizing radiation decreases the voltage at the element and causes movement. A bleed resistor is coupled between the electroscope support element or electrode and the ionization chamber wall electrode. 4 figs.

  18. Healthcare Energy Metering Guidance (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-07-01

    This brochure is intended to help facility and energy managers plan and prioritize investments in energy metering. It offers healthcare-specific examples of metering applications, benefits, and steps that other health systems can reproduce. It reflects collaborative input from the U.S. Department of Energy national laboratories and the health system members of the DOE Hospital Energy Alliance's Benchmarking and Measurement Project Team.

  19. Gamma radiation field intensity meter

    DOE Patents [OSTI]

    Thacker, Louis H. (Knoxville, TN)

    1995-01-01

    A gamma radiation intensity meter measures dose rate of a radiation field. The gamma radiation intensity meter includes a tritium battery emitting beta rays generating a current which is essentially constant. Dose rate is correlated to an amount of movement of an electroscope element charged by the tritium battery. Ionizing radiation decreases the voltage at the element and causes movement. A bleed resistor is coupled between the electroscope support element or electrode and the ionization chamber wall electrode.

  20. Gamma radiation field intensity meter

    DOE Patents [OSTI]

    Thacker, Louis H. (Knoxville, TN)

    1994-01-01

    A gamma radiation intensity meter measures dose rate of a radiation field. The gamma radiation intensity meter includes a tritium battery emitting beta rays generating a current which is essentially constant. Dose rate is correlated to an amount of movement of an electroscope element charged by the tritium battery. Ionizing radiation decreases the voltage at the element and causes movement. A bleed resistor is coupled between the electroscope support element or electrode and the ionization chamber wall electrode.

  1. The Need for Essential Consumer Protections: Smart Metering Proposals and

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX E LIST OF APPLICABLEStatutory Authority J-I-12 GeVAudit and Inspections AuditProject,the

  2. The Need for Essential Consumer Protections: Smart metering proposals and

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX E LIST OF APPLICABLEStatutory Authority J-I-12 GeVAudit and Inspections

  3. Insert metering plates for gas turbine nozzles

    DOE Patents [OSTI]

    Burdgick, Steven S.; Itzel, Gary; Chopra, Sanjay; Abuaf, Nesim; Correia, Victor H.

    2004-05-11

    The invention comprises a metering plate which is assembled to an impingement insert for use in the nozzle of a gas turbine. The metering plate can have one or more metering holes and is used to balance the cooling flow within the nozzle. A metering plate with multiple holes reduces static pressure variations which result from the cooling airflow through the metering plate. The metering plate can be assembled to the insert before or after the insert is inserted into the nozzle.

  4. Surveillance test interval optimization

    SciTech Connect (OSTI)

    Cepin, M.; Mavko, B. [Institut Jozef Stefan, Ljublijana (Slovenia)

    1995-12-31

    Technical specifications have been developed on the bases of deterministic analyses, engineering judgment, and expert opinion. This paper introduces our risk-based approach to surveillance test interval (STI) optimization. This approach consists of three main levels. The first level is the component level, which serves as a rough estimation of the optimal STI and can be calculated analytically by a differentiating equation for mean unavailability. The second and third levels give more representative results. They take into account the results of probabilistic risk assessment (PRA) calculated by a personal computer (PC) based code and are based on system unavailability at the system level and on core damage frequency at the plant level.

  5. Energy Theft in the Advanced Metering Infrastructure

    E-Print Network [OSTI]

    McDaniel, Patrick Drew

    energy management services such as fine grained pricing schemes, automatic meter reading, demand response

  6. Meters

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformationJesse BergkampCentermillionStockpile Stewardship NationalMEMS: Insideand RP-1

  7. Meters

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration wouldMass map shines light on dark matter ByMentor-ProtegeFrom theAvailableMetamaterialsH.sc 620

  8. Intelligent Control in Space Exploration: Interval Computations are Needed

    E-Print Network [OSTI]

    Kreinovich, Vladik

    missions, but also in the chemical industry, in metallurgy, in business). These experts usually cannot

  9. Federal Building Metering Guidance (Per U.S.C. 8253(e), Metering...

    Office of Environmental Management (EM)

    Guidance (Per U.S.C. 8253(e), Metering of Energy Use) Federal Building Metering Guidance (Per U.S.C. 8253(e), Metering of Energy Use) Guidance defines which federal buildings are...

  10. Government Program Briefing: Smart Metering

    SciTech Connect (OSTI)

    Doris, E.; Peterson, K.

    2011-09-01

    This document is adapted and updated from a memo delivered to the City Council of New Orleans, the office of the Mayor of New Orleans, the Chairperson of the Citizen Stakeholders Group (New Orleans Energy Task Force) and the U.S. Department of Energy (DOE) Project Officer in March 2008. This briefing piece provides an overview of the benefits, costs, and challenges of smart metering.

  11. Government Program Briefing: Smart Metering

    Office of Energy Efficiency and Renewable Energy (EERE)

    This document is adapted and updated from a memo delivered to the City Council of New Orleans, the office of the Mayor of New Orleans, the Chairperson of the Citizen Stakeholders Group (New Orleans Energy Task Force) and the U.S. Department of Energy (DOE) Project Officer in March 2008. This briefing piece provides an overview of the benefits, costs, and challenges of smart metering.

  12. A model personal energy meter

    E-Print Network [OSTI]

    Hay, Simon

    2011-10-11

    (PerCom 2010), Mannheim, Germany. Winner of the Mark Weiser Best Paper Award. DOI: 10.1109/PERCOM.2010.5466991 • Andrew Rice and Simon Hay. Measuring mobile phone energy consumption for 802.11 wireless networking. Pervasive and Mobile Computing, Volume... . . . . . . . . . . . . . . . . . . . . . . . . 36 2.2.2 Persuasive technologies for physical activity . . . . . . . . . . . . . 37 2.2.3 Persuasive technologies for energy consumption . . . . . . . . . . . 39 2.3 Metering electricity consumption . . . . . . . . . . . . . . . . . . . . . . . 42 2...

  13. Dead-time compensation for a logarithmic display rate meter

    DOE Patents [OSTI]

    Larson, J.A.; Krueger, F.P.

    1987-10-05

    An improved circuit is provided for application to a radiation survey meter that uses a detector that is subject to dead time. The circuit compensates for dead time over a wide range of count rates by producing a dead-time pulse for each detected event, a live-time pulse that spans the interval between dead-time pulses, and circuits that average the value of these pulses over time. The logarithm of each of these values is obtained and the logarithms are subtracted to provide a signal that is proportional to a count rate that is corrected for the effects of dead time. The circuit produces a meter indication and is also capable of producing an audible indication of detected events. 5 figs.

  14. Communication Needs and Integration Options

    E-Print Network [OSTI]

    Communication Needs and Integration Options for AMI in the Smart Grid Future Grid Initiative White System #12;Communication Needs and Integration Options for AMI in the Smart Grid Prepared for the Project the current state of communications for the advanced metering infrastructure (AMI) and recommends

  15. THE ACCESS ALMANAC - Making Parking Meters Popular

    E-Print Network [OSTI]

    Shoup, Donald

    2014-01-01

    market prices for curb parking, spend the revenue to improvechanging the politics of parking, cities can meter more ofair, and a cooler planet. Parking meters can then do a world

  16. Algorithms for revenue metering and their evaluation 

    E-Print Network [OSTI]

    Martinez-Lagunes, Rodrigo

    2000-01-01

    definitions for non-sinusoidal and/or unbalanced conditions . . . . . . . . . . . . . . 11 3. Definitions for polyphase circuits, . . 16 C. Metering standards... . . . . . . . . , . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . , . . . . . . . . . . . . . . . . . ?. .. . . . . . . . . . . . . . . . . . . . . . . . . 20 D. Conclusions. 21 III IMPLEMENTATION ISSUES 23 A. Introduction. B. Implementation of digital revenue meters C, Integration of digital revenue meters. 1. Communication architecture and protocols . . 2. Utility communication architecture (UCA...

  17. Net Metering | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX ECoop Inc Jump to: navigation,MeregNIFESpinningLtd JumpPFAN) | OpenUNEPNet Metering Jump

  18. PQMII POWER QUALITY METER INSTRUCTION MANUAL 11 PQMII Power Quality Meter

    E-Print Network [OSTI]

    Meyers, Steven D.

    #12;#12;#12;PQMII POWER QUALITY METER ­ INSTRUCTION MANUAL 1­1 PQMII Power Quality Meter Chapter 1 Multilin PQMII Power Quality Meter is an ideal choice for continuous monitoring of a single or three-phase system. It provides metering for current, voltage, real power, reactive power, apparent power, energy use

  19. Studies related to gas metering accuracy in natural gas vehicle filling stations

    SciTech Connect (OSTI)

    Vradis, G.; Otugen, V.; Girlea, F. [Polytechnic Univ., Brooklyn, NY (United States)

    1995-12-31

    The present study concentrates on the identification of a parameters affecting the metering accuracy in Natural Gas Vehicle (NGV) fueling stations. The results of an on-site monitoring program designed to establish the effect of vibrations and pressure pulsations on the operation of mass flow and rotary positive displacement meters are presented. It is established that pressure fluctuations due to mean flow pulsations are weak in the immediate vicinity of the meters and, based on available experimental results, are not expected to have any impact on meter accuracy. However, vibrations in the operating environment of coriolis mass flow meters are shown to have potentially strong influence on their accuracy. Also, an analysis of available experimental data is performed to identify the source of instabilities observed in the output signal of coriolis mass flow meters. It is shown that such instabilities could be the result of hydrodynamic phenomena that need to be studied further.

  20. Metering Approaches | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    is needed depending on whether the program is trying to verify utility rates, implement demand response or load management programs, or support certification efforts. One-Time...

  1. City of St. George- Net Metering

    Broader source: Energy.gov [DOE]

    The St. George City Council adopted a net-metering program for area utilities, including interconnection procedures, in October 2005.* The interconnection procedures include different requirements,...

  2. Table 12. Advanced metering, 2007 through 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    Iowa" "Technology by sector", 2013, 2012, 2011, 2010, 2009, 2008, 2007 "AMR meters",744438,722583,713567,710239,697696,559054,139256 "Residential",646196,624355,620170,615649,61235...

  3. Table 12. Advanced metering, 2007 through 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    Georgia" "Technology by sector", 2013, 2012, 2011, 2010, 2009, 2008, 2007 "AMR meters",627008,613969,521331,487830,435276,317642,295425 "Residential",556807,552232,467749,440914,39...

  4. Table 12. Advanced metering, 2007 through 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    Connecticut" "Technology by sector", 2013, 2012, 2011, 2010, 2009, 2008, 2007 "AMR meters",1469876,1481357,1496432,1536716,1530906,1534171,1478640 "Residential",1324280,1334604,135...

  5. Table 12. Advanced metering, 2007 through 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    Florida" "Technology by sector", 2013, 2012, 2011, 2010, 2009, 2008, 2007 "AMR meters",3395748,3755977,3637527,3231398,3216922,2579337,2416630 "Residential",3139468,3455396,3325863...

  6. Table 12. Advanced metering, 2007 through 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    Virginia" "Technology by sector", 2013, 2012, 2011, 2010, 2009, 2008, 2007 "AMR meters",2978913,3094379,3079891,3159249,3047610,3053272,2934487 "Residential",2742598,2851174,284125...

  7. Table 12. Advanced metering, 2007 through 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    Minnesota" "Technology by sector", 2013, 2012, 2011, 2010, 2009, 2008, 2007 "AMR meters",1913337,1922706,1909106,1985873,1874104,1718448,363947 "Residential",1730915,1735168,173372...

  8. Table 12. Advanced metering, 2007 through 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    Colorado" "Technology by sector", 2013, 2012, 2011, 2010, 2009, 2008, 2007 "AMR meters",1643794,1552727,1622740,1636242,1495425,1410712,231119 "Residential",1491944,1425970,1502253...

  9. Table 12. Advanced metering, 2007 through 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    Maryland" "Technology by sector", 2013, 2012, 2011, 2010, 2009, 2008, 2007 "AMR meters",611045,877019,903093,889901,875440,845154,725634 "Residential",549148,799807,823936,815476,8...

  10. Table 12. Advanced metering, 2007 through 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    Rhode Island" "Technology by sector", 2013, 2012, 2011, 2010, 2009, 2008, 2007 "AMR meters",471388,470428,467346,457508,458475,451138,450668 "Residential",461380,461788,460721,4094...

  11. Table 12. Advanced metering, 2007 through 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    Dakota" "Technology by sector", 2013, 2012, 2011, 2010, 2009, 2008, 2007 "AMR meters",274775,171896,165282,181060,149553,123861,41003 "Residential",225851,141249,139162,154904,1293...

  12. Table 12. Advanced metering, 2007 through 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    Delaware" "Technology by sector", 2013, 2012, 2011, 2010, 2009, 2008, 2007 "AMR meters",116714,114296,113252,405728,56702,110087,20750 "Residential",105342,103234,102397,364709,526...

  13. Table 12. Advanced metering, 2007 through 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    Michigan" "Technology by sector", 2013, 2012, 2011, 2010, 2009, 2008, 2007 "AMR meters",337976,324455,314211,359361,333902,272851,189606 "Residential",292051,283561,272718,318011,2...

  14. Table 12. Advanced metering, 2007 through 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    Mexico" "Technology by sector", 2013, 2012, 2011, 2010, 2009, 2008, 2007 "AMR meters",214695,229210,220279,228503,244759,216434,112719 "Residential",192195,206606,198130,207663,226...

  15. Table 12. Advanced metering, 2007 through 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    Illinois" "Technology by sector", 2013, 2012, 2011, 2010, 2009, 2008, 2007 "AMR meters",997408,973664,998081,1002378,973505,851285,549055 "Residential",888394,869121,894434,902092,...

  16. Table 12. Advanced metering, 2007 through 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    Kansas" "Technology by sector", 2013, 2012, 2011, 2010, 2009, 2008, 2007 "AMR meters",349836,335293,320708,400083,308859,300734,53919 "Residential",303782,289091,276856,343492,2646...

  17. Table 12. Advanced metering, 2007 through 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    Mississippi" "Technology by sector", 2013, 2012, 2011, 2010, 2009, 2008, 2007 "AMR meters",273118,136678,116456,144254,103645,91623,24243 "Residential",237034,117623,101376,130228,...

  18. Table 12. Advanced metering, 2007 through 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    Arizona" "Technology by sector", 2013, 2012, 2011, 2010, 2009, 2008, 2007 "AMR meters",380098,339368,314854,246497,666915,500476,354452 "Residential",342033,307265,287712,225362,63...

  19. Table 12. Advanced metering, 2007 through 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    Tennessee" "Technology by sector", 2013, 2012, 2011, 2010, 2009, 2008, 2007 "AMR meters",730599,309569,320041,45373,43870,43861,46240 "Residential",643429,276292,285239,41482,41208...

  20. Table 12. Advanced metering, 2007 through 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    Washington" "Technology by sector", 2013, 2012, 2011, 2010, 2009, 2008, 2007 "AMR meters",1715708,1681481,1656936,1611285,1326509,1346041,1143057 "Residential",1525473,1494345,1474...

  1. Table 12. Advanced metering, 2007 through 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    Oklahoma" "Technology by sector", 2013, 2012, 2011, 2010, 2009, 2008, 2007 "AMR meters",385000,430870,427117,459002,392071,400426,277880 "Residential",332981,377207,376188,400471,3...

  2. Table 12. Advanced metering, 2007 through 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    United States" "Technology by sector", 2013, 2012, 2011, 2010 "AMR meters",48736538,48330822,45965762,48685043 "Residential",43728325,43455437,41451888,43913225...

  3. Table 12. Advanced metering, 2007 through 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    Pennsylvania" "Technology by sector", 2013, 2012, 2011, 2010, 2009, 2008, 2007 "AMR meters",1508995,2093902,2358735,2338527,2232621,2203630,1526540 "Residential",1283786,1854282,21...

  4. Table 12. Advanced metering, 2007 through 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    Alaska" "Technology by sector", 2013, 2012, 2011, 2010, 2009, 2008, 2007 "AMR meters",232888,233270,230916,221262,139874,58993,27057 "Residential",204000,206539,204690,195920,12497...

  5. Table 12. Advanced metering, 2007 through 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    Montana" "Technology by sector", 2013, 2012, 2011, 2010, 2009, 2008, 2007 "AMR meters",520018,495676,489407,482732,481682,397693,347611 "Residential",448313,430824,429479,423471,41...

  6. Table 12. Advanced metering, 2007 through 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    Carolina" "Technology by sector", 2013, 2012, 2011, 2010, 2009, 2008, 2007 "AMR meters",1848300,1816190,1809822,1897976,1700354,1510892,963079 "Residential",1621880,1600626,1596247...

  7. Table 12. Advanced metering, 2007 through 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    Massachusetts" "Technology by sector", 2013, 2012, 2011, 2010, 2009, 2008, 2007 "AMR meters",2815732,2753089,2717020,2634758,2605159,2389547,2327751 "Residential",2579059,2527224,2...

  8. Table 12. Advanced metering, 2007 through 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    Wyoming" "Technology by sector", 2013, 2012, 2011, 2010, 2009, 2008, 2007 "AMR meters",225895,210204,206764,147885,175769,139584,26178 "Residential",181206,166730,162523,114344,141...

  9. Table 12. Advanced metering, 2007 through 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    Ohio" "Technology by sector", 2013, 2012, 2011, 2010, 2009, 2008, 2007 "AMR meters",1068626,948564,727112,622965,563380,512000,277489 "Residential",976072,867682,680331,582725,5255...

  10. Table 12. Advanced metering, 2007 through 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    Nebraska" "Technology by sector", 2013, 2012, 2011, 2010, 2009, 2008, 2007 "AMR meters",535042,523950,503996,484383,454089,399845,380008 "Residential",451388,444819,430631,415589,3...

  11. Table 12. Advanced metering, 2007 through 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    Louisiana" "Technology by sector", 2013, 2012, 2011, 2010, 2009, 2008, 2007 "AMR meters",371841,357579,344263,342766,331557,283997,203389 "Residential",344167,330690,318544,316995,...

  12. Table 12. Advanced metering, 2007 through 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    Missouri" "Technology by sector", 2013, 2012, 2011, 2010, 2009, 2008, 2007 "AMR meters",1920471,1935078,1917474,1959937,1921343,1933413,1546006 "Residential",1696195,1709394,169806...

  13. Table 12. Advanced metering, 2007 through 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    Carolina" "Technology by sector", 2013, 2012, 2011, 2010, 2009, 2008, 2007 "AMR meters",3708639,3613936,3768269,4027965,3718103,3521887,2048869 "Residential",3322965,3255122,339690...

  14. Table 12. Advanced metering, 2007 through 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    Utah" "Technology by sector", 2013, 2012, 2011, 2010, 2009, 2008, 2007 "AMR meters",947887,931692,903266,912616,851283,791097,374299 "Residential",861955,849405,821766,814440,77296...

  15. Table 12. Advanced metering, 2007 through 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    West Virginia" "Technology by sector", 2013, 2012, 2011, 2010, 2009, 2008, 2007 "AMR meters",520857,464502,473117,474077,436376,438764,448444 "Residential",439830,394660,399243,402...

  16. Table 12. Advanced metering, 2007 through 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    Idaho" "Technology by sector", 2013, 2012, 2011, 2010, 2009, 2008, 2007 "AMR meters",177493,168685,163567,142759,151004,146779,88220 "Residential",155125,147140,142398,122329,13372...

  17. Table 12. Advanced metering, 2007 through 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    Indiana" "Technology by sector", 2013, 2012, 2011, 2010, 2009, 2008, 2007 "AMR meters",1251574,1284613,1095102,1059678,1038172,951160,382580 "Residential",1115322,1167245,990346,96...

  18. Table 12. Advanced metering, 2007 through 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    Dakota" "Technology by sector", 2013, 2012, 2011, 2010, 2009, 2008, 2007 "AMR meters",162490,163750,181907,193350,89054,66943,33995 "Residential",140673,143049,159847,171557,79340,...

  19. Table 12. Advanced metering, 2007 through 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    Kentucky" "Technology by sector", 2013, 2012, 2011, 2010, 2009, 2008, 2007 "AMR meters",532871,607590,548321,495475,529171,526410,445146 "Residential",465927,534181,484008,439680,4...

  20. Table 12. Advanced metering, 2007 through 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    Texas" "Technology by sector", 2013, 2012, 2011, 2010, 2009, 2008, 2007 "AMR meters",2278989,2649814,2362245,2609078,3758758,2513848,1019510 "Residential",2073428,2396415,2160965,2...

  1. Table 12. Advanced metering, 2007 through 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    Oregon" "Technology by sector", 2013, 2012, 2011, 2010, 2009, 2008, 2007 "AMR meters",183897,173477,180073,180305,182669,179104,91950 "Residential",168007,158650,161735,163234,1679...

  2. Table 12. Advanced metering, 2007 through 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    California" "Technology by sector", 2013, 2012, 2011, 2010, 2009, 2008, 2007 "AMR meters",827670,580957,431858,1696965,345864,238634,181180 "Residential",699209,481305,319842,15202...

  3. Table 12. Advanced metering, 2007 through 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    York" "Technology by sector", 2013, 2012, 2011, 2010, 2009, 2008, 2007 "AMR meters",3052524,2515127,2328801,2223645,2164329,1701366,1534285 "Residential",2848664,2295268,2140229,20...

  4. Proton recoil scintillator neutron rem meter

    DOE Patents [OSTI]

    Olsher, Richard H. (Los Alamos, NM); Seagraves, David T. (Los Alamos, NM)

    2003-01-01

    A neutron rem meter utilizing proton recoil and thermal neutron scintillators to provide neutron detection and dose measurement. In using both fast scintillators and a thermal neutron scintillator the meter provides a wide range of sensitivity, uniform directional response, and uniform dose response. The scintillators output light to a photomultiplier tube that produces an electrical signal to an external neutron counter.

  5. Assessment of Demand Response and Advanced Metering

    E-Print Network [OSTI]

    Tesfatsion, Leigh

    #12;#12;2008 Assessment of Demand Response and Advanced Metering Staff Report Federal Energy metering penetration and potential peak load reduction from demand response have increased since 2006. Significant activity to promote demand response or to remove barriers to demand response occurred at the state

  6. INTERVAL METHODS IN REMOTE SENSING

    E-Print Network [OSTI]

    Ward, Karen

    INTERVAL METHODS IN REMOTE SENSING: RELIABLE SUB­DIVISION OF GEOLOGICAL AREAS David D. Coblentz, G of the locations which weren't that thoroughly analyzed. 1 #12; 2 The subdivision of a geological zone TOPOGRAPHIC INFORMATION One reason for subjectivity of the geological subdivision is the fact

  7. Frequent-Interval Seismic CPTu

    Office of Energy Efficiency and Renewable Energy (EERE)

    Frequent-Interval Seismic CPTu D. Bruce Nothdurft, MSCE, PE, PG SRS Geotechnical Engineering Department Savannah River Nuclear Solutions Alec V. McGillivray, PhD, PE Geotechnical Consultant Brent J. Gutierrez, PhD, PE NPH Engineering Manager, DOE-SR

  8. BasaltBasalt Cased interval

    E-Print Network [OSTI]

    BasaltBasalt Rock units Cased interval Well completion Slotted casing Submersible pump Water level bls. Submersible pump intake near 262 ft bls; depth to water is 245.24 taken October 2, 2014. #12;GAM. Submersible pump intake near 604 ft bls. Depth to water is 600.32 taken October 9, 2014. #12;GAM(NAT) 0 75API

  9. Linear Regression Sample Proportions Interpretation of the Confidence Interval Interval Estimation

    E-Print Network [OSTI]

    Watkins, Joseph C.

    Linear Regression Sample Proportions Interpretation of the Confidence Interval Topic 16 Interval Estimation Additional Topics 1 / 9 #12;Linear Regression Sample Proportions Interpretation of the Confidence Interval Outline Linear Regression Sample Proportions Interpretation of the Confidence Interval 2 / 9 #12

  10. Farmington Electric Utility System- Net Metering

    Broader source: Energy.gov [DOE]

    Farmington Electric, a municipal utility, offers net metering to residential customers with systems up to 10 kilowatts (kW) in capacity. This option is available for photovoltaic (PV), wind, hydro...

  11. Table 12. Advanced metering, 2007 through 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    New Hampshire" "Technology by sector", 2013, 2012, 2011, 2010, 2009, 2008, 2007 "AMR meters",69251,61857,59512,53293,50098,48310,46505 "Residential",67647,60510,58467,47171,43959,4...

  12. Table 12. Advanced metering, 2007 through 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    Jersey" "Technology by sector", 2013, 2012, 2011, 2010, 2009, 2008, 2007 "AMR meters",38125,41827,35412,43254,27018,21054,8132 "Residential",35775,28906,23442,31700,15987,11031,726...

  13. Table 12. Advanced metering, 2007 through 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    Hawaii" "Technology by sector", 2013, 2012, 2011, 2010, 2009, 2008, 2007 "AMR meters",33662,57269,46871,44911,41201,28512,22820 "Residential",32688,53083,44459,42324,38779,26141,21...

  14. Table 12. Advanced metering, 2007 through 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    Nevada" "Technology by sector", 2013, 2012, 2011, 2010, 2009, 2008, 2007 "AMR meters",53483,38201,81499,78292,96058,81992,63856 "Residential",44206,30907,72579,69795,85984,74356,59...

  15. Table 12. Advanced metering, 2007 through 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    Vermont" "Technology by sector", 2013, 2012, 2011, 2010, 2009, 2008, 2007 "AMR meters",53266,44430,84409,81030,77963,71278,58477 "Residential",48343,39930,76274,73703,71100,65176,5...

  16. Table 12. Advanced metering, 2007 through 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    District of Columbia" "Technology by sector", 2013, 2012, 2011, 2010, 2009, 2008, 2007 "AMR meters",2188,2991,4659,35987,29770,32000,3562 "Residential",1046,1722,3108,32964,27174,2...

  17. Table 12. Advanced metering, 2007 through 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    Maine" "Technology by sector", 2013, 2012, 2011, 2010, 2009, 2008, 2007 "AMR meters",6822,6415,5210,4499,116826,103242,101084 "Residential",6455,6075,4920,3375,101823,101363,99995...

  18. Murray City Power- Net Metering Pilot Program

    Office of Energy Efficiency and Renewable Energy (EERE)

    Under a pilot program, Murray City Power offers net metering to customers that generate electricity using photovoltaic (PV), wind-electric or hydroelectric systems with a maximum capacity of 10...

  19. Heating Energy Meter Validation for Apartments 

    E-Print Network [OSTI]

    Cai, B.; Li, D.; Hao, B.

    2006-01-01

    Bedroom Dining No.1 Toilet room Bedroom Kitchen Dining room No.2 Toilet Kitchen Bedroom Fig 1 Standard cells? illustration 3 RELIABILITY ANALYZING OF HEAT METERS? DATA By the arduous work of workers, project group gain the data of 361 heat meters... and Building Saving Energy [M]. Beijing: Machine Industry Press, 2004.1, 269-414. (In Chinese) [3] Jinglang CAI, Zheng XU, Yingchao LI. Analyzing to Adjacent Rooms? Heat Transfer for Central Heating System [J]. Heating and Ventilating and Air...

  20. How to Read Residential Electric and Natural Gas Meters | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    How to Read Residential Electric and Natural Gas Meters How to Read Residential Electric and Natural Gas Meters An electromechanical electric meter on the side of a house. | Photo...

  1. Secretary Chu Announces Two Million Smart Grid Meters Installed...

    Energy Savers [EERE]

    Secretary Chu Announces Two Million Smart Grid Meters Installed Nationwide Secretary Chu Announces Two Million Smart Grid Meters Installed Nationwide August 31, 2010 - 12:00am...

  2. Smart Meters Offer ‘Instant Gratification;’ Help Houston Homeowners Save

    Broader source: Energy.gov [DOE]

    How can smart meters help you save on your electric bill? Homeowners in Houston see their savings in real time on Recovery-act funded smart meters.

  3. High Performance Computing Data Center Metering Protocol | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    High Performance Computing Data Center Metering Protocol High Performance Computing Data Center Metering Protocol Guide details the methods for measurement in High Performance...

  4. Solutia: Utilizing Sub-Metering to Drive Energy Project Approvals...

    Broader source: Energy.gov (indexed) [DOE]

    plant. Solutia: Utilizing Sub-Metering to Drive Energy Project Approvals Through Data (July 2011) More Documents & Publications Nissan North America: How Sub-Metering...

  5. Metering Best Practices: A Guide to Achieving Utility Resource...

    Broader source: Energy.gov (indexed) [DOE]

    information about energy and resource metering at federal facilities, including metering requirements under the Energy Policy Act of 2005. mbpg2015.pdf More Documents &...

  6. Demand Response and Smart Metering Policy Actions Since the Energy...

    Office of Environmental Management (EM)

    Demand Response and Smart Metering Policy Actions Since the Energy Policy Act of 2005: A Summary for State Officials Demand Response and Smart Metering Policy Actions Since the...

  7. Electrical Metering Equipment and Sensors Appendix D -Electrical Metering Equipment and Sensors

    E-Print Network [OSTI]

    Appendix D ­ Electrical Metering Equipment and Sensors #12;D.1 Appendix D - Electrical Metering Equipment and Sensors D.1 Controllable Electrical Panel Figure D.1. Square D Power Link Electrical Panel D.1.1 Schneider Electric/Square D Power Link G3 Control System The Square D Powerlink G3 offers programmable

  8. High resolution time interval counter

    DOE Patents [OSTI]

    Condreva, K.J.

    1994-07-26

    A high resolution counter circuit measures the time interval between the occurrence of an initial and a subsequent electrical pulse to two nanoseconds resolution using an eight megahertz clock. The circuit includes a main counter for receiving electrical pulses and generating a binary word--a measure of the number of eight megahertz clock pulses occurring between the signals. A pair of first and second pulse stretchers receive the signal and generate a pair of output signals whose widths are approximately sixty-four times the time between the receipt of the signals by the respective pulse stretchers and the receipt by the respective pulse stretchers of a second subsequent clock pulse. Output signals are thereafter supplied to a pair of start and stop counters operable to generate a pair of binary output words representative of the measure of the width of the pulses to a resolution of two nanoseconds. Errors associated with the pulse stretchers are corrected by providing calibration data to both stretcher circuits, and recording start and stop counter values. Stretched initial and subsequent signals are combined with autocalibration data and supplied to an arithmetic logic unit to determine the time interval in nanoseconds between the pair of electrical pulses being measured. 3 figs.

  9. High resolution time interval counter

    DOE Patents [OSTI]

    Condreva, Kenneth J. (Livermore, CA)

    1994-01-01

    A high resolution counter circuit measures the time interval between the occurrence of an initial and a subsequent electrical pulse to two nanoseconds resolution using an eight megahertz clock. The circuit includes a main counter for receiving electrical pulses and generating a binary word--a measure of the number of eight megahertz clock pulses occurring between the signals. A pair of first and second pulse stretchers receive the signal and generate a pair of output signals whose widths are approximately sixty-four times the time between the receipt of the signals by the respective pulse stretchers and the receipt by the respective pulse stretchers of a second subsequent clock pulse. Output signals are thereafter supplied to a pair of start and stop counters operable to generate a pair of binary output words representative of the measure of the width of the pulses to a resolution of two nanoseconds. Errors associated with the pulse stretchers are corrected by providing calibration data to both stretcher circuits, and recording start and stop counter values. Stretched initial and subsequent signals are combined with autocalibration data and supplied to an arithmetic logic unit to determine the time interval in nanoseconds between the pair of electrical pulses being measured.

  10. Liquid metal Flow Meter - Final Report

    SciTech Connect (OSTI)

    Andersen, C.; Hoogendoom, S.; Hudson, B.; Prince, J.; Teichert, K.; Wood, J.; Chase, K.

    2007-01-30

    Measuring the flow of liquid metal presents serious challenges. Current commercially-available flow meters use ultrasonic, electromagnetic, and other technologies to measure flow, but are inadequate for liquid metal flow measurement because of the high temperatures required by most liquid metals. As a result of the reactivity and high temperatures of most liquid metals, corrosion and leakage become very serious safety concerns. The purpose of this project is to develop a flow meter for Lockheed Martin that measures the flow rate of molten metal in a conduit.

  11. SOLVENT DISPERSION AND FLOW METER CALCULATION RESULTS

    SciTech Connect (OSTI)

    Nash, C.; Fondeur, F.; Peters, T.

    2013-06-21

    Savannah River National Laboratory (SRNL) found that the dispersion numbers for the six combinations of CSSX:Next Generation Solvent (NGS) “blend” and pure NGS versus salt solution, caustic wash, and strip aqueous solutions are all good. The dispersion numbers are indications of processability with centrifugal contactors. A comparison of solvent physical and thermal properties shows that the Intek™ solvent flow meter in the plant has a reading biased high versus calibrated flow when NGS is used, versus the standard CSSX solvent. The flow meter, calibrated for CSSX solvent, is predicted to read 2.8 gpm of NGS in a case where the true flow of NGS is 2.16 gpm.

  12. Development of the prototype Munitions Case Moisture Meter, Model ORNL-1

    SciTech Connect (OSTI)

    Agouridis, D.C.; Gayle, T.M.; Griest, W.H.

    1993-02-24

    There is a great need for a rapid and simple means of determining the moisture content in combustible cartridge case (ccc) munitions. Previous studies have demonstrated that accumulation of moisture in ccc rounds, such as the M829, leads to softening of the case wall and weakening of the adhesive joint. Moisture in the ccc can lead to incomplete combustion of the case upon firing the round. Currently, there are no facile methods for measuring the moisture content. A prototype portable meter for non-destructive and rapid estimation of moisture in ccc has been developed. The Munitions Case Moisture Meter Model ORNL-1 demonstrates the feasibility of developing an instrument based on the moisture dependence of dielectric properties, to measure moisture in ccc munitions in storage and in the field. These instruments are simple, inexpensive, lightweight, portable, low-power battery operated, and intrinsically safe. They provide nondestructive, noninvasive, and rapid measurements. Calibration data for the prototype are not available at this time. Therefore, calibration of the meter and the development of a scale reading directly moisture content in munitions rounds could not be completed. These data will be supplied by the US Army from its tests of the meter with actual munitions. However, experimental results on empty cccs in laboratory conditions demonstrate satisfactory performance of the instrument. Additional work is needed to bring the prototype to its optimum usefulness and accuracy for field measurements. This includes: Calibration of the meter scale with full-up munitions; Data and evaluation procedures to adjust the performance of the meter for different environmental conditions such as temperature and humidity; and Studies of the dielectric properties of moist ccc materials, as a function of frequency and temperature, are needed for adjustment of the meter for optimal performance.

  13. Development of the prototype Munitions Case Moisture Meter, Model ORNL-1. Final report

    SciTech Connect (OSTI)

    Agouridis, D.C.; Gayle, T.M.; Griest, W.H.

    1993-02-24

    There is a great need for a rapid and simple means of determining the moisture content in combustible cartridge case (ccc) munitions. Previous studies have demonstrated that accumulation of moisture in ccc rounds, such as the M829, leads to softening of the case wall and weakening of the adhesive joint. Moisture in the ccc can lead to incomplete combustion of the case upon firing the round. Currently, there are no facile methods for measuring the moisture content. A prototype portable meter for non-destructive and rapid estimation of moisture in ccc has been developed. The Munitions Case Moisture Meter Model ORNL-1 demonstrates the feasibility of developing an instrument based on the moisture dependence of dielectric properties, to measure moisture in ccc munitions in storage and in the field. These instruments are simple, inexpensive, lightweight, portable, low-power battery operated, and intrinsically safe. They provide nondestructive, noninvasive, and rapid measurements. Calibration data for the prototype are not available at this time. Therefore, calibration of the meter and the development of a scale reading directly moisture content in munitions rounds could not be completed. These data will be supplied by the US Army from its tests of the meter with actual munitions. However, experimental results on empty cccs in laboratory conditions demonstrate satisfactory performance of the instrument. Additional work is needed to bring the prototype to its optimum usefulness and accuracy for field measurements. This includes: Calibration of the meter scale with full-up munitions; Data and evaluation procedures to adjust the performance of the meter for different environmental conditions such as temperature and humidity; and Studies of the dielectric properties of moist ccc materials, as a function of frequency and temperature, are needed for adjustment of the meter for optimal performance.

  14. Algebraic Structures Using Super Interval Matrices

    E-Print Network [OSTI]

    W. B. Vasantha Kandasamy; Florentin Smarandache

    2011-10-01

    In this book super interval matrices using the special type of intervals of the form [0, a] are introduced. Several algebraic structures like semigroups, groups, semirings, rings, semivector spaces and vector spaces are introduced. Special fuzzy linear algebras are introduced using the concept of super fuzzy interval matrices.

  15. Smart Meter Company Boosting Production, Workforce

    Office of Energy Efficiency and Renewable Energy (EERE)

    A manufacturing facility in South Carolina is producing enough smart meters to reduce annual electricity use by approximately 1.7 million megawatt hours -- and through advanced manufacturing tax credits, just increased the facility's production capability by 20 percent and created 420 jobs.

  16. A CARBON METER FOR OPTIMISATION OF GOLD

    E-Print Network [OSTI]

    Mucina, Ladislav

    A CARBON METER FOR OPTIMISATION OF GOLD EXTRACTION IP COMMERCIALISATION Tom Hammond Business of technology The Carbon-in-Pulp (CIP) process is used as the primary gold extraction method in gold mines around the world. An observation that activated carbon added to the circuit is not well monitored

  17. Natural gas vehicle fueling station dispenser meter evaluations

    SciTech Connect (OSTI)

    Rowley, P.F.; Kriha, K.; Blazek, C.F. [Inst. of Gas Technology, Chicago, IL (United States)

    1995-12-31

    The Institute of Gas Technology (IGT) has constructed a multi-purpose meter evaluation facility capable of testing metering technologies for high flow rate and high pressure NGV dispenser applications. The objective of IGT`s meter evaluation program, sponsored by IGT`s Sustaining Membership Program and the Gas Research Institute, is to assist the industry in evaluating the performance and accuracy of currently available flowmeters that are being used or could be applied to CNG gas dispensing. These meters are tested at various flow rates and pressures to determine their performance under NGV fueling station operating conditions and to identify the performance characteristics and limitations for each meter. The metering technologies which are being evaluated under this program include Coriolis meter, sonic nozzle meter, and turbine meter designs.

  18. Community Net Energy Metering: How Novel Policies Expand Benefits of Net Metering to Non-Generators

    SciTech Connect (OSTI)

    Rose, James; Varnado, Laurel

    2009-04-01

    As interest in community solutions to renewable energy grows, more states are beginning to develop policies that encourage properties with more than one meter to install shared renewable energy systems. State net metering policies are evolving to allow the aggregation of multiple meters on a customer���¢��������s property and to dissolve conventional geographical boundaries. This trend means net metering is expanding out of its traditional function as an enabling incentive to offset onsite customer load at a single facility. This paper analyzes community net energy metering (CNEM) as an emerging vehicle by which farmers, neighborhoods, and municipalities may more easily finance and reap the benefits of renewable energy. Specifically, it aims to compare and contrast the definition of geographical boundaries among different CNEM models and examine the benefits and limitations of each approach. As state policies begin to stretch the geographic boundaries of net metering, they allow inventive solutions to encourage renewable energy investment. This paper attempts to initiate the conversation on this emerging policy mechanism and offers recommendations for further development of these policies.

  19. A standard pH meter requiring calibration and using glass electrodes

    E-Print Network [OSTI]

    Wallace, Mark

    , and in September 2012 won the Frost & Sullivan 2012 North American New Product Innovation Award. In March 2013 of wasted supplies and products ­ all factors which underline the pressing need for a pH meter that does for calibration. This groundbreaking technology was patented and then licensed by Isis Innovation (the technology

  20. Prison Industries Metering at the Texas Department of Criminal Justice: Two Years of Operational Experience 

    E-Print Network [OSTI]

    Bryant, J.; McBride, J.; Merka, T.

    2003-01-01

    , Inc. installed a state-ofthe- art sub-metering system with the intent of meeting the needs of the TDCJ-U&E group well into the future. The system uses a web-based data acquisition interface and is capable of near real-time data acquisition and display...

  1. Fuel cell membrane hydration and fluid metering

    DOE Patents [OSTI]

    Jones, Daniel O. (Glenville, NY); Walsh, Michael M. (Fairfield, CT)

    2003-01-01

    A hydration system includes fuel cell fluid flow plate(s) and injection port(s). Each plate has flow channel(s) with respective inlet(s) for receiving respective portion(s) of a given stream of reactant fluid for a fuel cell. Each injection port injects a portion of liquid water directly into its respective flow channel. This serves to hydrate at least corresponding part(s) of a given membrane of the corresponding fuel cell(s). The hydration system may be augmented by a metering system including flow regulator(s). Each flow regulator meters an injecting at inlet(s) of each plate of respective portions of liquid into respective portion(s) of a given stream of fluid by corresponding injection port(s).

  2. Fuel cell membrane hydration and fluid metering

    DOE Patents [OSTI]

    Jones, Daniel O. (Glenville, NY); Walsh, Michael M. (Fairfield, CT)

    1999-01-01

    A hydration system includes fuel cell fluid flow plate(s) and injection port(s). Each plate has flow channel(s) with respective inlet(s) for receiving respective portion(s) of a given stream of reactant fluid for a fuel cell. Each injection port injects a portion of liquid water directly into its respective flow channel in order to mix its respective portion of liquid water with the corresponding portion of the stream. This serves to hydrate at least corresponding part(s) of a given membrane of the corresponding fuel cell(s). The hydration system may be augmented by a metering system including flow regulator(s). Each flow regulator meters an injecting at inlet(s) of each plate of respective portions of liquid into respective portion(s) of a given stream of fluid by corresponding injection port(s).

  3. How to Read Your Electric Meter | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Your Electric Meter How to Read Your Electric Meter July 2, 2012 - 8:21pm Addthis The difference between one month's reading and the next is the amount of energy units that have...

  4. Solutia: Utilizing Sub-Metering to Drive Energy Project Approvals...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Solutia: Utilizing Sub-Metering to Drive Energy Project Approvals Through Data Solutia, Inc. has a long history with sub-metering, dating back to the construction of some of its...

  5. Algebraic Structures using Natural Class of Intervals

    E-Print Network [OSTI]

    W. B. Vasantha Kandasamy; Florentin Smarandache

    2011-07-02

    This book has eleven chapters. Chapter one describes all types of natural class of intervals and the arithmetic operations on them. Chapter two introduces the semigroup of natural class of intervals using R or Zn and study the properties associated with them. Chapter three studies the notion of rings constructed using the natural class of intervals. Matrix theory using the special class of intervals is analyzed in chapter four of this book. Chapter five deals with polynomials using interval coefficients. New types of rings of natural intervals are introduced and studied in chapter six. The notion of vector space using natural class of intervals is built in chapter seven. In chapter eight fuzzy natural class of intervals are introduced and algebraic structures on them is built and described. Algebraic structures using natural class of neutrosophic intervals are developed in chapter nine.Chapter ten suggests some possible applications. The final chapter proposes over 200 problems of which some are at research level and some difficult and others are simple.

  6. Genesis of a three-phase subsea metering system. [Oil and gas metering systems for subsea operations

    SciTech Connect (OSTI)

    Dowty, E.L.; Hatton, G.J.; Durrett, M.G. ); Dean, T.L.; Jiskoot, R.J.J.

    1993-08-01

    Periodic well flow testing is necessary to monitor well and reservoir performance over time to optimize decisions on well production rates and new well requirements through improved reservoir models, to determine the timing of well workovers, and to identify when wells become uneconomical to produce. A dedicated test separator' conventionally is used to meter individual wells. Fluids from a well are separated into the three component phases (oil, gas, and water) in a large vessel, and the flow rate of each phase is measured on the respective outlet lines from the vessel. The same method currently is used for subsea satellite developments by providing a dedicated test pipeline' from the subsea field to carry a selected well's production to a test separator for metering on the host platform. The capital cost of these systems rises rapidly with distance. Greater distances between the wellhead and flow test system increase the cost of the test pipeline and require larger and hence more expensive slug catchers and risers. Clearly, a subsea-based well-test system could result in large capital cost savings by eliminating the need for conventional test systems. This paper tracks the development of one subsea well test system from conception to field testing on the Tartan. A platform in the North Sea. This work defines the design requirements of the system, reviews system development and fabrication, describes modifications made as a result of initial field tests, and reports the results of topside tests completed through Dec. 1990.

  7. Compact gas meter assessment. Final report, May 1989-June 1990

    SciTech Connect (OSTI)

    Corliss, J.M.

    1994-06-01

    The overall objective of the Arthur D. Little meter evaluation program was to conduct a comprehensive, comparative evaluation of six compact gas meter concepts to assess their overall near- and long-term commercialization potential, and to recommend to GRI any further developments necessary to assure introduction of compact gas meters into the marketplace.

  8. ECEEE SUMMER STUDY PROCEEDINGS 1991 Communicating `smartness': smart meter

    E-Print Network [OSTI]

    Oxford, University of

    ECEEE SUMMER STUDY PROCEEDINGS 1991 Communicating `smartness': smart meter installers in UK homes Coleraine BT52 1SA Northern Ireland Keywords smart metering, customer feedback, households, energy guid in Northern Ireland. All the participants have been involved in installing smart meters or semi-smart keypad

  9. Smart Meters | OpenEI Community

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX ECoop Inc JumpHeter Battery Technology CoWanpingSilveiraSmallSmarr EMC JumpSmart Meters

  10. Net Metering Resources | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyTher i nAand DOEDepartment ofProgramImports by Pipeline intosomeofNeilnet metering

  11. Widget:GoalMeter | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION JEnvironmental Jump to:EA EISTJThinWarsaw,What Is aDisqusHelper JumpFlashDetectGasMapGoalMeter Jump

  12. The 800-meter sample toroidal field conductor

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorking With U.S. CoalMexicoConferencePrice (DollarsPortal800-meter sample

  13. Neuropsychological mechanisms of interval timing behavior

    E-Print Network [OSTI]

    Wilkinson, Gerald S.

    perceiving a beat in a musical composition to returning to the stove just prior to the tea kettle whistling to expecting a traffic light to change from red to green. Furthermore, interval timing is exhibited in a wide

  14. Boolean lattices as intervals in clone lattices

    E-Print Network [OSTI]

    Krokhin, Andrei

    Boolean lattices as intervals in clone lattices A.A.Krokhin Ural State University, Dept. of Algebra and Discrete Mathematics, Lenin av. 51, 620083, Ekaterinburg, Russia e-mail: Andrei.Krokhin@usu.ru Abstract All

  15. Frequency domain design of interval controller 

    E-Print Network [OSTI]

    Park, Wunyong

    1993-01-01

    Subject: Electrical Engineering FREQUENCY DOMAIN DFSIGN OF INTERVAL CONTROLLER A Thesis by WUNYONG PARK Approved as to style and content by: S. P. Bhattacharyyd (Chair of Committee) C. N. Georghiades (Member) A. Datta (Member) S. Jayasuriya... (Member) . H. Keel (Member) A. Patton (Head of Department) May 1993 111 ABSTRACT Frequency Domain Design of Interval Controller. (May 1993) Wunyong Park, B. S. , Yon Sei University; M. S. , Yon Sei University Chair of Advisory Committee: Dr. S...

  16. Fuel Quality and Metering: Current Status and Future Needs | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum12, 2015ExecutiveFluorescentDanKathy LoftusFuelDepartment of1FuelQualityIssues

  17. Meeting the "Applied" Accuracy Needs of Energy Metering

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on DeliciousMathematicsEnergyInterested Parties - WAPAEnergy May 28 Webinar toMeeting the "Applied"

  18. De Minimis Thresholds for Federal Building Metering Appropriateness

    SciTech Connect (OSTI)

    Henderson, Jordan W.

    2015-03-31

    The U.S. Department of Energy (DOE) is required by statute and Presidential Memorandum to establish guidelines for agencies to meter their Federal buildings for energy (electricity, natural gas, and steam) and water. See 42 U.S.C. § 8253(e). DOE issued guidance in February 2006 on the installation of electric meters in Federal buildings. A recent update to the 2006 guidance accounts for more current metering practices within the Federal Government. The updated metering guidance specifies that all Federal buildings shall be considered “appropriate” for energy or water metering unless identified for potential exclusion. In developing the updated guidance to carry out the statue, Congress also directed DOE to (among other things) establish exclusions from the metering requirements based on the de minimis quantity of energy use of a Federal building, industrial process, or structure. This paper discusses the method used to identify de minimis values.

  19. Method and apparatus for reading meters from a video image

    DOE Patents [OSTI]

    Lewis, Trevor J. (Irwin, PA); Ferguson, Jeffrey J. (North Huntingdon, PA)

    1997-01-01

    A method and system to enable acquisition of data about an environment from one or more meters using video images. One or more meters are imaged by a video camera and the video signal is digitized. Then, each region of the digital image which corresponds to the indicator of the meter is calibrated and the video signal is analyzed to determine the value indicated by each meter indicator. Finally, from the value indicated by each meter indicator in the calibrated region, a meter reading is generated. The method and system offer the advantages of automatic data collection in a relatively non-intrusive manner without making any complicated or expensive electronic connections, and without requiring intensive manpower.

  20. Insights from Smart Meters: Identifying Specific Actions, Behaviors...

    Energy Savers [EERE]

    and Characteristics That Drive Savings in Behavior-Based Programs Insights from Smart Meters: Identifying Specific Actions, Behaviors, and Characteristics That Drive...

  1. Wavelength meter having single mode fiber optics multiplexed inputs

    DOE Patents [OSTI]

    Hackel, Richard P. (Livermore, CA); Paris, Robert D. (San Ramon, CA); Feldman, Mark (Pleasanton, CA)

    1993-01-01

    A wavelength meter having a single mode fiber optics input is disclosed. The single mode fiber enables a plurality of laser beams to be multiplexed to form a multiplexed input to the wavelength meter. The wavelength meter can provide a determination of the wavelength of any one or all of the plurality of laser beams by suitable processing. Another aspect of the present invention is that one of the laser beams could be a known reference laser having a predetermined wavelength. Hence, the improved wavelength meter can provide an on-line calibration capability with the reference laser input as one of the plurality of laser beams.

  2. Energy Secretary Chu Announces Five Million Smart Meters Installed...

    Broader source: Energy.gov (indexed) [DOE]

    TX) project involves deployment of a fully integrated advanced metering system and Web portal access to over 2.2 million customers and installation of advanced monitoring and...

  3. Improvements in Shallow (Two-Meter) Temperature Measurements...

    Open Energy Info (EERE)

    Measurements and Data Interpretation Abstract The Great Basin Center for Geothermal Energy has been working on improvements in shallow (two-meter) temperature surveys in two...

  4. Optimization Online - A Security Framework for Smart Metering with ...

    E-Print Network [OSTI]

    Cristina Rottondi

    2011-12-05

    Dec 5, 2011 ... A Security Framework for Smart Metering with Multiple Data Consumers. Cristina ... This paper proposes a framework for allowing information ...

  5. Smart Meters Helping Oklahoma Consumers Save Hundreds During...

    Office of Environmental Management (EM)

    Consumers Save Hundreds During Summer Heat Smart Meters Helping Oklahoma Consumers Save Hundreds During Summer Heat July 26, 2011 - 4:27pm Addthis Small business owner Steve...

  6. Wavelength meter having single mode fiber optics multiplexed inputs

    DOE Patents [OSTI]

    Hackel, R.P.; Paris, R.D.; Feldman, M.

    1993-02-23

    A wavelength meter having a single mode fiber optics input is disclosed. The single mode fiber enables a plurality of laser beams to be multiplexed to form a multiplexed input to the wavelength meter. The wavelength meter can provide a determination of the wavelength of any one or all of the plurality of laser beams by suitable processing. Another aspect of the present invention is that one of the laser beams could be a known reference laser having a predetermined wavelength. Hence, the improved wavelength meter can provide an on-line calibration capability with the reference laser input as one of the plurality of laser beams.

  7. The Intersection of Net Metering and Retail Choice: An Overview...

    Energy Savers [EERE]

    and defined five different theoretical models describing different ways competitive suppliers and utilities provide net metering options for their customers. They then provided...

  8. Shallow (2-meter) temperature surveys in Colorado

    SciTech Connect (OSTI)

    Zehner, Richard E.

    2012-02-01

    Citation Information: Originator: Geothermal Development Associates, Reno, Nevada Publication Date: 2012 Title: Colorado 2m Survey Edition: First Publication Information: Publication Place: Reno Nevada Publisher: Geothermal Development Associates, Reno, Nevada Description: Shallow temperature surveys are useful in early-stage geothermal exploration to delineate surface outflow zones, with the intent to identify the source of upwelling, usually a fault. Detailed descriptions of the 2-meter survey method and equipment design can be found in Coolbaugh et al. (2007) and Sladek et al. (2007), and are summarized here. The survey method was devised to measure temperature as far below the zone of solar influence as possible, have minimal equilibration time, and yet be portable enough to fit on the back of an all-terrain vehicle (ATV); Figure 2). This method utilizes a direct push technology (DPT) technique where 2.3 m long, 0.54” outer diameter hollow steel rods are pounded into the ground using a demolition hammer. Resistance temperature devices (RTD) are then inserted into the rods at 2-meter depths, and allowed to equilibrate for one hour. The temperatures are then measured and recorded, the rods pulled out of the ground, and re-used at future sites. Usually multiple rods are planted over the course of an hour, and then the sampler returns back to the first station, measures the temperatures, pulls the rods, and so on, to eliminate waiting time. At Wagon Wheel Gap, 32 rods were planted around the hot springs between June 20 and July 1, 2012. The purpose was to determine the direction of a possible upflow fault or other structure. Temperatures at 1.5m and 2m depths were measured and recorded in the attribute table of this point shapefile. Several anomalous temperatures suggest that outflow is coming from a ~N60W striking fault or shear zone that contains the quartz-fluorite-barite veins of the adjacent patented mining claims. It should be noted that temperatures at 2m depth vary according to the amount of solar heating from above, as well as possible geothermal heating from below. Spatial Domain: Extent: Top: 4490310.560635 m Left: 150307.008238 m Right: 433163.213617 m Bottom: 4009565.915398 m Contact Information: Contact Organization: Geothermal Development Associates, Reno, Nevada Contact Person: Richard “Rick” Zehner Address: 3740 Barron Way City: Reno State: NV Postal Code: 89511 Country: USA Contact Telephone: 775-737-7806 Spatial Reference Information: Coordinate System: Universal Transverse Mercator (UTM) WGS’1984 Zone 13N False Easting: 500000.00000000 False Northing: 0.00000000 Central Meridian: -105.00000000 Scale Factor: 0.99960000 Latitude of Origin: 0.00000000 Linear Unit: Meter Datum: World Geodetic System 1984 (WGS ’1984) Prime Meridian: Greenwich Angular Unit: Degree Digital Form: Format Name: Shape file

  9. hp calculators HP 50g Confidence Intervals Real Estate

    E-Print Network [OSTI]

    Vetter, Frederick J.

    hp calculators HP 50g Confidence Intervals ­ Real Estate The STAT menu Confidence Intervals Practice finding confidence intervals ­ Real Estate #12;hp calculators HP 50g Confidence Intervals ­ Real Estate hp calculators - 2 - HP 50g Confidence Intervals ­ Real Estate The STAT menu The Statistics menu

  10. Virtual Machine Power Metering and Provisioning Aman Kansal, Feng Zhao,

    E-Print Network [OSTI]

    Zhao, Feng

    data centers have led to most new servers providing power usage measurement in hardware and alter- nateVirtual Machine Power Metering and Provisioning Aman Kansal, Feng Zhao, Jie Liu Microsoft Research of them is lack of power metering for virtual machines (VMs). Power man- agement requirements in modern

  11. Optimal Privacy-Preserving Energy Management for Smart Meters

    E-Print Network [OSTI]

    Zhang, Junshan

    Optimal Privacy-Preserving Energy Management for Smart Meters Lei Yang, Xu Chen, Junshan Zhang, Smart Grid, Data Privacy, Load Monitor, Cost Saving, Battery I. INTRODUCTION A. Motivation Smart meters, and H. Vincent Poor School of Electrical, Computer and Energy Engineering, Arizona State University

  12. A Global Personal Energy Meter University of Cambridge Computer Laboratory

    E-Print Network [OSTI]

    Cambridge, University of

    - sumption figures scaled by a predetermined factor for the type of energy used and divided equally amongstA Global Personal Energy Meter Simon Hay University of Cambridge Computer Laboratory Abstract of goods and provision of services. I envisage a personal energy meter which can record and apportion

  13. Smart Meter Deployment Optimization for Efficient Electrical Appliance State Monitoring

    E-Print Network [OSTI]

    Wang, Yongcai

    in such buildings, researches in the field of smart building and smart grid are exploring an efficient energy high costs to the smart meter deploy- ment, data collection and system maintenance. In practiceSmart Meter Deployment Optimization for Efficient Electrical Appliance State Monitoring Xiaohong

  14. Scalable Meter Data Collection in Smart Grids through Message Concatenation

    E-Print Network [OSTI]

    Namboodiri, Vinod

    1 Scalable Meter Data Collection in Smart Grids through Message Concatenation Babak Karimi, Student The information communication and control layer of the smart grid brings about numerous advances, including and the grid operator's control center, as well as between the smart meter and consumer appliances, would

  15. Distributed Intersection Join of Complex Interval Sequences

    E-Print Network [OSTI]

    Kriegel, Hans-Peter

    Introduction After two decades of temporal and spatial index research, the efficient management of one be aggregated to an interval sequence, such as periods of "high" stock prices for technical chart analysis (cf simulations in virtual product environ- ments [8] or engineering data management can be supported

  16. Non-invasive energy meter for fixed and variable flow systems

    DOE Patents [OSTI]

    Menicucci, David F.; Black, Billy D.

    2005-11-01

    An energy metering method and apparatus for liquid flow systems comprising first and second segments of one or more conduits through which a liquid flows, comprising: attaching a first temperature sensor for connection to an outside of the first conduit segment; attaching a second temperature sensor for connection to an outside of the second conduit segment; via a programmable control unit, receiving data from the sensors and calculating energy data therefrom; and communicating energy data from the meter; whereby the method and apparatus operate without need to temporarily disconnect or alter the first or second conduit segments. The invention operates with both variable and fixed flow systems, and is especially useful for both active and passive solar energy systems.

  17. Gas energy meter for inferential determination of thermophysical properties of a gas mixture at multiple states of the gas

    DOE Patents [OSTI]

    Morrow, Thomas B. (San Antonio, TX); Kelner, Eric (San Antonio, TX); Owen, Thomas E. (Helotes, TX)

    2008-07-08

    A gas energy meter that acquires the data and performs the processing for an inferential determination of one or more gas properties, such as heating value, molecular weight, or density. The meter has a sensor module that acquires temperature, pressure, CO2, and speed of sound data. Data is acquired at two different states of the gas, which eliminates the need to determine the concentration of nitrogen in the gas. A processing module receives this data and uses it to perform a "two-state" inferential algorithm.

  18. Embedded Firmware Diversity for Smart Electric Meters Stephen McLaughlin, Dmitry Podkuiko, Adam Delozier

    E-Print Network [OSTI]

    McDaniel, Patrick Drew

    the near century-old electromechanical meters at- tached to the exteriors of many buildings, smart metersEmbedded Firmware Diversity for Smart Electric Meters Stephen McLaughlin, Dmitry Podkuiko, Adam}@cse.psu.edu Abstract Smart meters are now being aggressively deployed world- wide, with tens of millions of meters

  19. DIMACS Technical Report 200337 Perfect interval filament graphs

    E-Print Network [OSTI]

    DIMACS Technical Report 2003­37 Perfect interval filament graphs by Fanica GAVRIL 1 DIMACS, Rutgers are disjoint, their curves do not intersect; FI={ f i | iÎI} is a family of interval filaments and its intersection graph is an interval filament graph. The interval filament graphs contain the polygon

  20. Value creation and value capture of advanced electricity meter information

    E-Print Network [OSTI]

    Oesterlin, Ulf

    2011-01-01

    Advanced or smart metering has been a hot topic in the electricity community for several years. Despite the excitement about the technology, few business cases are actually able to justify the investment cost. One reason ...

  1. How to Read Residential Electric and Natural Gas Meters | Department...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    courtesy of iStockphotofstockfoto You can read your own meters to help monitor your electric or gas energy use. During the heating season, your energy use should be compared...

  2. 25 years ago: the official farewell to the meter

    E-Print Network [OSTI]

    Thomas Schucker

    2008-10-20

    On october 21st 1983 took place in S\\`evres on the western outskirts of Paris the official funeral of the meter. With it the notion of distance as a physical observable was buried.

  3. San Antonio City Public Service (CPS Energy)- Net Metering

    Broader source: Energy.gov [DOE]

    Net metering is available to customers of CPS Energy. There is no aggregate capacity limit or maximum system size. There are also no commissioning fees or facilities charges for customers.

  4. Application for a Certificate of Public Good for Net Metered...

    Open Energy Info (EERE)

    for a Certificate of Public Good for Net Metered Power Systems that are Non-Photovoltaic Systems Up to 150 kW (AC) in Capacity Jump to: navigation, search OpenEI Reference...

  5. Down to the Meter: Localized Vehicle Pollution Matters

    E-Print Network [OSTI]

    Houston, Douglas; Wu, Jun; Ong, Paul; Winer, Arthur

    2006-01-01

    to Near-Roadway Vehicle Pollution,” American Journal ofthe Meter: Localized Vehicle Pollution Matters B Y D O U G Lto confront vehicle-related pollution are proving to be

  6. ARRA Program Celebrates Milestone 600,000 Smart Meter Installations

    Broader source: Energy.gov [DOE]

    On April 11, 2012, DOE Recovery Act funding recipient Sacramento Municipal Utility District (SMUD) celebrated a major milestone in the development of a regional smart grid in California: the installation of over 600,000 smart meters.

  7. Down to the Meter: Localized Vehicle Pollution Matters

    E-Print Network [OSTI]

    Houston, Douglas; Wu, Jun; Ong, Paul; Winer, Arthur

    2006-01-01

    Near-Roadway Vehicle Pollution,” American Journal of Publicfor Vehicle-Related Air Pollution Exposure in Minority andMeter: Localized Vehicle Pollution Matters B Y D O U G L A S

  8. CBEI - Virtual Refrigerant Charge Sensing and Load Metering

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    (system definition) Accomplishments - Water-Side Load Metering Swope School of Music Cooling Season Results (AHU-7) July15 - July 21, 2014 (Period 2) Daily -2.6% 2.0%...

  9. Development Of 2-Meter Soil Temperature Probes And Results Of...

    Open Energy Info (EERE)

    Development Of 2-Meter Soil Temperature Probes And Results Of Temperature Survey Conducted At Desert Peak, Nevada, Usa Jump to: navigation, search OpenEI Reference LibraryAdd to...

  10. Shared Signals: Using Existing Facility Meters for Energy Savings Verification 

    E-Print Network [OSTI]

    McBride, J. R.; Bohmer, C. J.; Price, S. D.; Carlson, K.; Lopez, J.

    1997-01-01

    This paper reviews and summarizes techniques for using or sharing signals from existing facility and utility meters for the purpose of verifying energy savings from industrial, institutional and large commercial energy conservation projects...

  11. Temperature Effect in Multiphase Flow Meter Using Slotted Orifice Plate 

    E-Print Network [OSTI]

    Sihombing, Dohar Jono

    2015-04-30

    Multiphase flow metering is one of the major focuses to develop in oil and gas industries. A combination of slotted orifice plate and electrical impedance technique was investigated in order to provide further development ...

  12. An Agent Based Simulation of Smart Metering Technology Adoption

    E-Print Network [OSTI]

    Zhang, Tao; Nuttall, William J.

    simultaneously), micro-hydro, micro-wind and photovoltaics. The benefits of wind, solar and hydro micro-generation are the zero fuel cost and that the technologies are carbon free. The development of micro-generation can potentially produce a third of a... /behavioural theory. The paper is comprised of six sections. The second section describes smart metering technology and its current situation of adoption. The third section describes our agent-based simulation model of smart metering technology adoption...

  13. Smart-Metering for Monitoring Building Power Distribution Network using Instantaneous Phasor Computations of Electrical Signals

    E-Print Network [OSTI]

    K.R., Krishnanand

    2013-01-01

    efficient operation of a smart meter network . in Industrialpolicies and case studies in smart metering . in Power andG.B. Huitema. Good standards for smart meters . in European

  14. Sub-metering to Electricity Use in Large-scale Commercial Buildings 

    E-Print Network [OSTI]

    Yuan, W.

    2006-01-01

    -metering and statistics ???? Method to actualize sub-metering ???? Practice??Project example ???? Use of data??Analysis Software Sub-metering and statistics to electricity use in commercial buildings 3 Situation?? 4 types of large-scale commercial building Shopping mall... in commercial buildings ???? Significanceof sub-metering and statistics ???? Method to actualize sub-metering ???? Practice??Project example ???? Use of data??Analysis Software Sub-metering and statistics to electricity use in commercial buildings 8 Method...

  15. Interval Data Systems Inc | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History View NewTexas: Energy ResourcesOrder at 8, 13Renewable PowerMismatch | Open EnergyInterval Data

  16. Metering Best Practices. A Guide to Achieving Utility Resource Efficiency, Release 3.0

    SciTech Connect (OSTI)

    Parker, Steven A.; Hunt, W. D.; McMordie Stoughton, Kate; Boyd, Brian K.; Fowler, Kimberly M.; Koehler, Theresa M.; Sandusky, William F.; Sullivan, Greg P.; Pugh, Ray

    2015-04-05

    DOE FEMP guide for metering best practices aligned with the DOE Metering Guidance revision required by the 12/2013 Presidential Memo.

  17. Using Wireless Power Meters to Measure Energy Use of Miscellaneous and Electronic Devices in Buildings

    E-Print Network [OSTI]

    Brown, Richard

    2012-01-01

    a High-Fidelity Wireless Building Energy Auditing Network.Using Wireless Power Meters to Measure Energy Use ofUsing Wireless Power Meters to Measure Energy Miscellaneous

  18. Nissan North America: How Sub-Metering Changed the Way a Plant...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Smyrna wireless infrastructure has allowed the energy team to study the implementation of wireless energy meters. This flexibility could enable cost-effective energy metering at...

  19. Using Wireless Power Meters to Measure Energy Use of Miscellaneous and Electronic Devices in Buildings

    E-Print Network [OSTI]

    Brown, Richard

    2012-01-01

    with a High-Fidelity Wireless Building Energy AuditingN ATIONAL L ABORATORY Using Wireless Power Meters to Measureopportunity employer. Using Wireless Power Meters to Measure

  20. Smart-Metering for Monitoring Building Power Distribution Network using Instantaneous Phasor Computations of Electrical Signals

    E-Print Network [OSTI]

    K.R., Krishnanand

    2013-01-01

    Smart-Metering for Monitoring Building Power Distributionimplementable for smart-meters for a building. Eachcontrol node of a building so as to make smart decisions.

  1. Balance of Plant Needs and Integration of Stack Components for

    E-Print Network [OSTI]

    include vehicles, combined heat and power (CHP), industrial plants, and forklifts. #12;Who Needs Balance CONDENSER EXHAUST EXHAUST CHP LOAD WATER PUMP CATHODE BLOWER LS VALVE METERING VALVE COOLANT PUMP SIMPLIFIED/CHP Integrated Data System. Web. 2004-2007. #12;Reliability Industrial Motive Power Reliability is the top

  2. Deployment of Behind-The-Meter Energy Storage for Demand Charge Reduction

    SciTech Connect (OSTI)

    Neubauer, J.; Simpson, M.

    2015-01-01

    This study investigates how economically motivated customers will use energy storage for demand charge reduction, as well as how this changes in the presence of on-site photovoltaic power generation, to investigate the possible effects of incentivizing increased quantities of behind-the-meter storage. It finds that small, short-duration batteries are most cost effective regardless of solar power levels, serving to reduce short load spikes on the order of 2.5% of peak demand. While profitable to the customer, such action is unlikely to adequately benefit the utility as may be desired, thus highlighting the need for modified utility rate structures or properly structured incentives.

  3. Measurable Maximal Energy and Minimal Time Interval

    E-Print Network [OSTI]

    Eiman Abou El Dahab; Abdel Nasser Tawfik

    2014-01-14

    The possibility of finding the measurable maximal energy and the minimal time interval is discussed in different quantum aspects. It is found that the linear generalized uncertainty principle (GUP) approach gives a non-physical result. Based on large scale Schwarzshild solution, the quadratic GUP approach is utilized. The calculations are performed at the shortest distance, at which the general relativity is assumed to be a good approximation for the quantum gravity and at larger distances, as well. It is found that both maximal energy and minimal time have the order of the Planck time. Then, the uncertainties in both quantities are accordingly bounded. Some physical insights are addressed. Also, the implications on the physics of early Universe and on quantized mass are outlined. The results are related to the existence of finite cosmological constant and minimum mass (mass quanta).

  4. Advanced Metering Implementations - A Perspective from Federal Sector

    SciTech Connect (OSTI)

    Eaarni, Shankar

    2014-08-11

    Federal mandate (EPACT 2005) requires that federal buildings install advanced electrical meters-meters capable of providing data at least daily and measuring the consumption of electricity at least hourly. This work presents selected advanced metering implementations to understand some of the existing practices related to data capture and to understand how the data is being translated into information and knowledge that can be used to improve building energy and operational performance to meet federal energy reduction mandates. This study highlights case studies to represent some of the various actions that are being taken based on the data that are being collected to improve overall energy performance of these buildings. Some of these actions include- individualized tenant billing and energy forecasting, benchmarking, identifying energy conservation measures, measurement and verification.

  5. Smart preamplifier for real-time turbine meter diagnostics

    SciTech Connect (OSTI)

    Breter, J.C.

    1995-12-31

    A new, dual-purpose device for turbine meters, which functions as a traditional signal preamplifier and accomplishes real-time performance diagnostics, is now available. This smart preamplifier (patent pending) utilizes high speed microprocessor technology to continuously monitor and analyze the rotation of a turbine meter rotor. Continuous monitoring allows the device to detect rotational anomalies that can lead to erroneous measurements as they occur. The smart preamplifier works on liquid or gas turbine meters that use a variable reluctance pickup coil for signal generation. This paper will discuss the technology and capabilities of the smart preamplifier. To simplify this discussion, it is assumed that the signal generated will be via a non-rimmed rotor. Thus, the term ``blade`` is used throughout. However, all discussions relevant to signal generation are also true for a rimmed rotor using either buttons or slots for signal generation.

  6. Preliminaries Conserved Interval Distance between Non-trivial

    E-Print Network [OSTI]

    Blin, Guillaume

    Outline Preliminaries Results Conclusion Conserved Interval Distance between Non-trivial Genomes.Rizzi@unitn.it August the 16th Guillaume Blin, Romeo Rizzi Conserved Interval Distance between Non-trivial Genomes #12 Guillaume Blin, Romeo Rizzi Conserved Interval Distance between Non-trivial Genomes #12;Outline

  7. EDD-7 Electric Charge Point Meter test results

    SciTech Connect (OSTI)

    Mersman, C.R.

    1993-09-01

    The results of tests evaluating the electric switching portion of the EDD-7 Electric Charge Point Meter (ECPM) are presented. The ECPM is a modified parking meter that allows the purchase of 120 or 240 volt electric power. The ECPM is designed to make electricity available at any vehicle parking location. The test results indicate that the ECPM operated without failure thru a series of over current and ground fault tests at three different test temperatures. The magnitude of current required to trip the over current protection circuitry varied with temperature while the performance of the ground fault interruption circuitry did not change significantly with the test temperature.

  8. CAMPUS SMART METERS PPA NO: 14-0058 Page 1 of 3 Ritter Engineering, Inc.

    E-Print Network [OSTI]

    Maxwell, Bruce D.

    CAMPUS SMART METERS PPA NO: 14-0058 Page 1 of 3 Ritter Engineering, Inc. P.O. Box 1352 Billings, MT Engineers ADDENDUM NUMBER 1 DATE: February 25, 2015 PROJECT: Campus Smart Meters MSU Bozeman PPA No: 14 around the meter and meter bypass. 5. The City of Bozeman WILL require a Building Permit for this project

  9. Uncertainties in the Value of Bill Savings from Behind-the-Meter, Residential Photovoltaic Systems: The Roles of Electricity Market Conditions, Retail Rate Design, and Net Metering

    E-Print Network [OSTI]

    Darghouth, Naim Richard

    2013-01-01

    contentious issues related to net metering (E3 2010; IREC2010; IREC Freeing the grid 2012; ), there are surprisingly

  10. Portsmouth Needs Assessment

    Office of Energy Efficiency and Renewable Energy (EERE)

    Needs Assessment for former Oak Ridge K-25, Paducah, and Portsmouth Gaseous Diffusion Plant production workers.

  11. Paducah Needs Assessment

    Office of Energy Efficiency and Renewable Energy (EERE)

    Needs Assessment for former Oak Ridge K-25, Paducah, and Portsmouth Gaseous Diffusion Plant production workers.

  12. Volatility return intervals analysis of the Japanese market

    E-Print Network [OSTI]

    Jung, Woo-Sung; Havlin, Shlomo; Kaizoji, Taisei; Moon, Hie-Tae; Stanley, H Eugene

    2007-01-01

    We investigate scaling and memory effects in return intervals between price volatilities above a certain threshold $q$ for the Japanese stock market using daily and intraday data sets. We find that the distribution of return intervals can be approximated by a scaling function that depends only on the ratio between the return interval $\\tau$ and its mean $$. We also find memory effects such that a large (or small) return interval follows a large (or small) interval by investigating the conditional distribution and mean return interval. The results are similar to previous studies of other markets and indicate that similar statistical features appear in different financial markets. We also compare our results between the period before and after the big crash at the end of 1989. We find that scaling and memory effects of the return intervals show similar features although the statistical properties of the returns are different.

  13. VirusMeter: Preventing Your Cellphone , Guanhua Yan2

    E-Print Network [OSTI]

    Chen, Songqing

    . Due to the rapid advancement of mobile communication technology, mobile devices nowadays can support. The rationale underlying VirusMeter is the fact that mobile devices are usu- ally battery powered and any malicious activity would inevitably consume some battery power. By monitoring power consumption on a mobile

  14. Leveraging smart meter data to recognize home appliances Markus Weiss+#

    E-Print Network [OSTI]

    -- The worldwide adoption of smart meters that measure and communicate residential electricity consumption gives-intrusive load monitoring; energy monitoring; energy break down; electricity consumption I. APLLIANCE-SPECIFIC CONSUMPTION FEEDBACK The requirement to conserve energy, the modernization of the electrical grid

  15. Privacy Preserving Smart Metering System Based Retail Level Electricity Market

    E-Print Network [OSTI]

    Franchetti, Franz

    1 Privacy Preserving Smart Metering System Based Retail Level Electricity Market Cory Thoma, Tao technologies which includes load management and retail level electricity market support. Index Terms as the various market functionalities also pose great risks to customer privacy. In this work we propose a secure

  16. Metering Air Compressor Systems for Efficiency: A Progress Report 

    E-Print Network [OSTI]

    Joseph, B.

    2005-01-01

    was termed CASE Index, which varies from 0 to about 320, and has the units of SCF/KWH. The procedure we developed, involved metering of input (KWH) and output (SCFM), in and out of the central plant. After the initial beta testing of the procedure, as more...

  17. Hydrostatic bearings for a turbine fluid flow metering device

    DOE Patents [OSTI]

    Fincke, J.R.

    1982-05-04

    A rotor assembly fluid metering device has been improved by development of a hydrostatic bearing fluid system which provides bearing fluid at a common pressure to rotor assembly bearing surfaces. The bearing fluid distribution system produces a uniform film of fluid between bearing surfaces and allows rapid replacement of bearing fluid between bearing surfaces, thereby minimizing bearing wear and corrosion. 3 figs.

  18. CHARACTERIZATION OF H CANYON CONDUCTIVITY METER INDICATIONS WITH ELEVATED URANIUM IN NITRIC ACID

    SciTech Connect (OSTI)

    Nash, C

    2007-10-31

    Solution conductivity data from the 1CU conductivity meter in H-Canyon shows that uranium concentration in the 0 to 30 gram per liter (g/L) range has no statistically significant effect on the calibration of free nitric acid measurement. Based on these results, no additional actions are needed on the 1CU Conductivity Meter prior to or during the processing of uranium solutions in the 0 to 30 g/L range. A model based only on free nitric acid concentration is shown to be appropriate for explaining the data. Data uncertainties for the free acid measurement of uranium-bearing solutions are 8.5% or less at 95% confidence. The analytical uncertainty for calibrating solutions is an order of magnitude smaller only when uranium is not present, allowing use of a more accurate analytical procedure. Literature work shows that at a free nitric acid level of 0.33 M, uranium concentration of 30 g/L and 25 C, solution conductivity is 96.4% of that of a uranium-free solution. The level of uncertainties in the literature data and its fitting equation do not justify calibration changes based on this small depression in solution conductivity. This work supports preparation of H-Canyon processing of Super Kukla fuel; however, the results will be applicable to the processing of any similar concentration uranium and nitric acid solution. Super Kukla fuel processing will increase the uranium concentration above the nominal zero to 10 g/L level, though not above 30 g/L. This work examined free nitric acid levels ranging from 0.18 to 0.52 molar. Temperature ranged from 27.9 to 28.3 C during conductivity testing. The data indicates that sequential order of measurement is not a significant factor. The conductivity meter was thus flushed effectively between measurements as desired.

  19. Extending Sensor Calibration Intervals in Nuclear Power Plants

    SciTech Connect (OSTI)

    Coble, Jamie B.; Meyer, Ryan M.; Ramuhalli, Pradeep; Bond, Leonard J.; Shumaker, Brent; Hashemian, Hash

    2012-11-15

    Currently in the USA, sensor recalibration is required at every refueling outage, and it has emerged as a critical path item for shortening outage duration. International application of calibration monitoring, such as at the Sizewell B plant in UK, has shown that sensors may operate for eight years, or longer, within calibration tolerances. Online monitoring can be employed to identify those sensors which require calibration, allowing for calibration of only those sensors which need it. The US NRC accepted the general concept of online monitoring for sensor calibration monitoring in 2000, but no plants have been granted the necessary license amendment to apply it. This project addresses key issues in advanced recalibration methodologies and provides the science base to enable adoption of best practices for applying online monitoring, resulting in a public domain standardized methodology for sensor calibration interval extension. Research to develop this methodology will focus on three key areas: (1) quantification of uncertainty in modeling techniques used for calibration monitoring, with a particular focus on non-redundant sensor models; (2) accurate determination of acceptance criteria and quantification of the effect of acceptance criteria variability on system performance; and (3) the use of virtual sensor estimates to replace identified faulty sensors to extend operation to the next convenient maintenance opportunity.

  20. Smart Metering and Electricity Demand: Technology, Economics and International Experience

    E-Print Network [OSTI]

    Brophy Haney, A.; Jamasb, Tooraj; Pollitt, Michael G.

    in the context of investing in demand-side participation. Innovative forms of metering allow for more detailed information to be collected on electricity consumption; communications technology facilitates greater interaction between the end-user and the rest... of the electricity supply chain; and both information and interaction allow for end-users to become more actively involved in the electricity market by, for example, responding to price signals and information on consumption patterns. 2 Smaller electricity users...

  1. Hydrostatic bearings for a turbine fluid flow metering device

    DOE Patents [OSTI]

    Fincke, J.R.

    1980-05-02

    A rotor assembly fluid metering device has been improved by development of a hydrostatic bearing fluid system which provides bearing fluid at a common pressure to rotor assembly bearing surfaces. The bearing fluid distribution system produces a uniform film of fluid distribution system produces a uniform film of fluid between bearing surfaces and allows rapid replacement of bearing fluid between bearing surfaces, thereby minimizing bearing wear and corrosion.

  2. Metering Best Practices: A Guide to Achieving Utility Resource Efficiency |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankADVANCED MANUFACTURING OFFICESpecial ReportProposal toDepartment of Energy Metering Best Practices: A

  3. Uncertainty quantification in application of the enrichment meter principle for nondestructive assay of special nuclear material

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Burr, Tom; Croft, Stephen; Jarman, Kenneth D.

    2015-09-05

    The various methods of nondestructive assay (NDA) of special nuclear material (SNM) have applications in nuclear nonproliferation, including detection and identification of illicit SNM at border crossings, and quantifying SNM at nuclear facilities for safeguards. No assay method is complete without “error bars,” which provide one way of expressing confidence in the assay result. Consequently, NDA specialists typically quantify total uncertainty in terms of “random” and “systematic” components, and then specify error bars for the total mass estimate in multiple items. Uncertainty quantification (UQ) for NDA has always been important, but it is recognized that greater rigor is needed andmore »achievable using modern statistical methods. To this end, we describe the extent to which the guideline for expressing uncertainty in measurements (GUM) can be used for NDA. Also, we propose improvements over GUM for NDA by illustrating UQ challenges that it does not address, including calibration with errors in predictors, model error, and item-specific biases. A case study is presented using low-resolution NaI spectra and applying the enrichment meter principle to estimate the U-235 mass in an item. The case study illustrates how to update the current American Society for Testing and Materials guide for application of the enrichment meter principle using gamma spectra from a NaI detector.« less

  4. Building a wireless mesh networked real-time electricity metering system in an MIT dormitory

    E-Print Network [OSTI]

    Oehlerking, Austin L

    2009-01-01

    A competitive, closed-loop information feedback system of wireless electricity meters was designed, tested, and implemented in seven MIT dormitory rooms. The meters utilized Allegro Hall Effect current sensors as well as ...

  5. Feasibility of the design of dual-lane ramp meters in Texas 

    E-Print Network [OSTI]

    Butorac, Marc Allen

    1997-01-01

    As recurrent congestion and the number of vehicles on urban freeways in Texas have increased, the ability to effectively meter traffic using single-lane ramp meters has deteriorated. Other state departments of transportation experiencing similar...

  6. A Technology for Electronic Energy Meters Intelligent Accounting Using Distributed Database over TCP/IP Network

    E-Print Network [OSTI]

    Borissova, Daniela

    4 8 A Technology for Electronic Energy Meters Intelligent Accounting Using Distributed Database processing to allow the adequate information integration and resource control in the energy distribution the energy distribution enterprise information. Reading the electronic energy meters is made through

  7. Scaling and memory in volatility return intervals in financial markets

    E-Print Network [OSTI]

    Stanley, H. Eugene

    markets, we study the return intervals between the daily volatilities of the price changes that are above.federal- reserve.gov releases H10 hist. We choose to study daily data records because there are intraday trendsScaling and memory in volatility return intervals in financial markets Kazuko Yamasaki* , Lev

  8. United States- Land Based and Offshore Annual Average Wind Speed at 100 Meters

    Broader source: Energy.gov [DOE]

    Full-size, high resolution version of the 100-meter land-based and offshore wind speed resource map.

  9. Metering and Monitoring Approaches for Verifying Energy Savings from Energy Conservation Retrofits: Experiences from the Field 

    E-Print Network [OSTI]

    McBride, J. R.; Bohmer, C. J.; Lippman, R. H.

    1995-01-01

    building, industrial process or device requires a meter that measures and records the amount of power used over a period of time. Utility revenue meters, watt-hour transducers and multi-channel, integrated, solid-state, watt-hour meters are all used... to measure electrical energy consumption for savings verification purposes. Hand-held or portable watt meters are also used to obtain instantaneous power measurements, which can serve as? input to engineering models used to estimate electrical energy...

  10. VentureBeat Smart meters could breathe life into flagging chip market

    E-Print Network [OSTI]

    Lu, Chenyang

    Ricketts Even as the downturn dries up cleantech capital, smart-meter makers continue to do quite well

  11. Status of Net Metering: Assessing the Potential to Reach Program Caps (Poster)

    SciTech Connect (OSTI)

    Heeter, J.; Bird, L.; Gelman, R.

    2014-10-01

    Several states are addressing the issue of net metering program caps, which limit the total amount of net metered generating capacity that can be installed in a state or utility service territory. In this analysis, we examine net metering caps to gain perspective on how long net metering will be available in various jurisdictions under current policies. We also surveyed state practices and experience to understand important policy design considerations.

  12. Status of Net Metering: Assessing the Potential to Reach Program Caps

    SciTech Connect (OSTI)

    Heeter, J.; Gelman, R.; Bird, L.

    2014-09-01

    Several states are addressing the issue of net metering program caps, which limit the total amount of net metered generating capacity that can be installed in a state or utility service territory. In this analysis, we examine net metering caps to gain perspective on how long net metering will be available in various jurisdictions under current policies. We also surveyed state practices and experience to understand important policy design considerations.

  13. A Noninvasive Threat Analyzer for Advanced Metering Infrastructure in Smart Grid

    E-Print Network [OSTI]

    Wang, Yongge

    1 A Noninvasive Threat Analyzer for Advanced Metering Infrastructure in Smart Grid Mohammad Ashiqur--Advanced Metering Infrastructure (AMI) is the core component in a smart grid that exhibits a highly complex network--Advanced metering infrastructure, security analysis, formal verification. I. INTRODUCTION Smart grids provide

  14. Neighborhood Watch: Security and Privacy Analysis of Automatic Meter Reading Systems

    E-Print Network [OSTI]

    Gruteser, Marco

    gruteser@winlab.rutgers.edu ABSTRACT Research on smart meters has shown that fine-grained en- ergy usage data poses privacy risks since it allows inferences about activities inside homes. While smart meter for remotely collecting us- age data from electricity, gas, and water meters. Yet to the best of our knowledge

  15. Neighborhood Watch: Security and Privacy Analysis of Automatic Meter Reading Systems

    E-Print Network [OSTI]

    Xu, Wenyuan

    gruteser@winlab.rutgers.edu ABSTRACT Research on smart meters has shown that fine-grained en- ergy usage data poses privacy risks since it allows inferences about activities inside the home. While smart meter for remotely collecting us- age data from electricity, gas, and water meters. Yet to the best of our knowledge

  16. On the Scalable Collection of Metering Data in Smart Grids through Message Concatenation

    E-Print Network [OSTI]

    Namboodiri, Vinod

    On the Scalable Collection of Metering Data in Smart Grids through Message Concatenation Babak them through a communication backhaul. This work studies the smart meter message concatenation (SMMC) problem of how to concatenate multiple small smart metering messages arriving at data concentrator units

  17. Metering Plan: Monitoring Energy and Potable Water Use in PNNL EMS4 Buildings

    SciTech Connect (OSTI)

    Pope, Jason E.

    2012-07-25

    This Plan presents progress toward the metering goals shared by all national laboratories and discusses PNNL's contemporary approach to the installation of new meters. In addition, the Plan discusses the data analysis techniques with which PNNL is working to mature using endless data streams made available as a result of increased meter deployment.

  18. Accident information needs

    SciTech Connect (OSTI)

    Hanson, D.J.; Arcieri, W.C.; Ward, L.W.

    1992-12-31

    A Five-step methodology has been developed to evaluate information needs for nuclear power plants under accident conditions and the availability of plant instrumentation during severe accidents. Step 1 examines the credible accidents and their relationships to plant safety functions. Step 2 determines the information personnel involved in accident management will need to understand plant behavior. Step 3 determines the capability of the instrumentation to function properly under severe accident conditions. Step 4 determines the conditions expected during the identified severe accidents. Step 5 compares the instrument capabilities and the severe accident conditions to evaluate the availability of the instrumentation to supply needed plant information.

  19. Accident information needs

    SciTech Connect (OSTI)

    Hanson, D.J.; Arcieri, W.C.; Ward, L.W.

    1992-01-01

    A Five-step methodology has been developed to evaluate information needs for nuclear power plants under accident conditions and the availability of plant instrumentation during severe accidents. Step 1 examines the credible accidents and their relationships to plant safety functions. Step 2 determines the information personnel involved in accident management will need to understand plant behavior. Step 3 determines the capability of the instrumentation to function properly under severe accident conditions. Step 4 determines the conditions expected during the identified severe accidents. Step 5 compares the instrument capabilities and the severe accident conditions to evaluate the availability of the instrumentation to supply needed plant information.

  20. Testing the 2-element 4-wire delta watthour meter 

    E-Print Network [OSTI]

    Grasshoff, Lynn Howard

    1950-01-01

    & and other material& and for affording valuable suggestions for the prepaxation of this thesis. Appreciation is also exnxressed to M! . R. H. Mighell and Mr. H. E. Trekell of the General Electric Company fax supplying a ~ire delta meter and various... four wire delta system is used to supply polyphase and single phase loads from a bank of delta-oonneeted transformers. The squit is illustrated in Pigure L, Polyphase loads are supplied in the usual manner from the three lines a b-o, and single phase...

  1. MHK ISDB/Instruments/Nortek Aquadopp Current Meter | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History View NewTexas:Montezuma,Information MHK ISDB/Instruments/Nortek Aquadopp Current Meter < MHK

  2. Smart Meter Investments Support Rural Economy in Arkansas

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankADVANCED MANUFACTURINGEnergy BillsNo.Hydrogen4 »DigitalanDepartmentSecondarySmart GridSmartSmart Meter

  3. Smart Meters on Tap for Owasso, Oklahoma | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankADVANCED MANUFACTURINGEnergy BillsNo.Hydrogen4 »DigitalanDepartmentSecondarySmart GridSmartSmartMeters

  4. Smart Meters and a Smarter Grid | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effect Photovoltaics -7541 *Impact NeutronSmallGrid EVDepartment ofSmartSmart Meters

  5. The magnetic flywheel flow meter: Theoretical and experimental contributions

    SciTech Connect (OSTI)

    Buchenau, D., E-mail: d.buchenau@hzdr.de; Galindo, V.; Eckert, S. [Helmholtz-Zentrum Dresden-Rossendorf, Institute of Fluid Dynamics, Bautzner Landstraße 400, 01328 Dresden (Germany)

    2014-06-02

    The development of contactless flow meters is an important issue for monitoring and controlling of processes in different application fields, like metallurgy, liquid metal casting, or cooling systems for nuclear reactors and transmutation machines. Shercliff described in his book “The Theory of Electromagnetic Flow Measurement, Cambridge University Press, 1962” a simple and robust device for contact-less measurements of liquid metal flow rates which is known as magnetic flywheel. The sensor consists of several permanent magnets attached on a rotatable soft iron plate. This arrangement will be placed closely to the liquid metal flow to be measured, so that the field of the permanent magnets penetrates into the fluid volume. The flywheel will be accelerated by a Lorentz force arising from the interaction between the magnetic field and the moving liquid. Steady rotation rates of the flywheel can be taken as a measure for the mean flow rate inside the fluid channel. The present paper provides a detailed theoretical description of the sensor in order to gain a better insight into the functional principle of the magnetic flywheel. Theoretical predictions are confirmed by corresponding laboratory experiments. For that purpose, a laboratory model of such a flow meter was built and tested on a GaInSn-loop under various test conditions.

  6. Insights from Smart Meters: The Potential for Peak-Hour Savings from Behavior-Based Programs

    SciTech Connect (OSTI)

    Todd, Annika; Perry, Michael; Smith, Brian; Sullivan, Michael; Cappers, Peter; Goldman, Charles

    2014-03-25

    The rollout of smart meters in the last several years has opened up new forms of previously unavailable energy data. Many utilities are now able in real-time to capture granular, household level interval usage data at very high-frequency levels for a large proportion of their residential and small commercial customer population. This can be linked to other time and locationspecific information, providing vast, constantly growing streams of rich data (sometimes referred to by the recently popular buzz word, “big data”). Within the energy industry there is increasing interest in tapping into the opportunities that these data can provide. What can we do with all of these data? The richness and granularity of these data enable many types of creative and cutting-edge analytics. Technically sophisticated and rigorous statistical techniques can be used to pull interesting insights out of this highfrequency, human-focused data. We at LBNL are calling this “behavior analytics”. This kind of analytics has the potential to provide tremendous value to a wide range of energy programs. For example, highly disaggregated and heterogeneous information about actual energy use would allow energy efficiency (EE) and/or demand response (DR) program implementers to target specific programs to specific households; would enable evaluation, measurement and verification (EM&V) of energy efficiency programs to be performed on a much shorter time horizon than was previously possible; and would provide better insights in to the energy and peak hour savings associated with specifics types of EE and DR programs (e.g., behavior-based (BB) programs). In this series, “Insights from Smart Meters”, we will present concrete, illustrative examples of the type of value that insights from behavior analytics of these data can provide (as well as pointing out its limitations). We will supply several types of key findings, including: • Novel results, which answer questions the industry previously was unable to answer; • Proof-of-concept analytics tools that can be adapted and used by others; and • Guidelines and protocols that summarize analytical best practices. This report focuses on one example of the kind of value that analysis of this data can provide: insights into whether behavior-based (BB) efficiency programs have the potential to provide peak-hour energy savings.

  7. Interval Data Analysis with the Energy Charting and Metrics Tool (ECAM)

    SciTech Connect (OSTI)

    Taasevigen, Danny J.; Katipamula, Srinivas; Koran, William

    2011-07-07

    Analyzing whole building interval data is an inexpensive but effective way to identify and improve building operations, and ultimately save money. Utilizing the Energy Charting and Metrics Tool (ECAM) add-in for Microsoft Excel, building operators and managers can begin implementing changes to their Building Automation System (BAS) after trending the interval data. The two data components needed for full analyses are whole building electricity consumption (kW or kWh) and outdoor air temperature (OAT). Using these two pieces of information, a series of plots and charts and be created in ECAM to monitor the buildings performance over time, gain knowledge of how the building is operating, and make adjustments to the BAS to improve efficiency and start saving money.

  8. On performance bounds for interval Time Petri Nets Simona Bernardi

    E-Print Network [OSTI]

    Bernardi, Simona

    Ingenier´ia de Sistemas Universidad de Zaragoza, Spain jcampos@unizar.es Abstract Interval time Petri Nets and Technol- ogy and the project PERF of the Italian Ministry of Education, University and Research. tivities

  9. Experimental uncertainty estimation and statistics for data having interval uncertainty.

    SciTech Connect (OSTI)

    Kreinovich, Vladik; Oberkampf, William Louis; Ginzburg, Lev; Ferson, Scott; Hajagos, Janos

    2007-05-01

    This report addresses the characterization of measurements that include epistemic uncertainties in the form of intervals. It reviews the application of basic descriptive statistics to data sets which contain intervals rather than exclusively point estimates. It describes algorithms to compute various means, the median and other percentiles, variance, interquartile range, moments, confidence limits, and other important statistics and summarizes the computability of these statistics as a function of sample size and characteristics of the intervals in the data (degree of overlap, size and regularity of widths, etc.). It also reviews the prospects for analyzing such data sets with the methods of inferential statistics such as outlier detection and regressions. The report explores the tradeoff between measurement precision and sample size in statistical results that are sensitive to both. It also argues that an approach based on interval statistics could be a reasonable alternative to current standard methods for evaluating, expressing and propagating measurement uncertainties.

  10. Interval-valued Soft Constraint Problems , M. S. Pini1

    E-Print Network [OSTI]

    Rossi, Francesca

    preference intervals can be useful or necessary are energy trading and network traffic analysis [15], where the data information is usually incomplete or erroneous. In energy trading, costs may be im- precise since

  11. Honest Confidence Intervals for the Error Variance in Stepwise Regression

    E-Print Network [OSTI]

    Stine, Robert A.

    Honest Confidence Intervals for the Error Variance in Stepwise Regression Dean P. Foster and Robert alternatives are used. These simpler algorithms (e.g., forward or backward stepwise regression) obtain

  12. Trace formulas for fourth order operators on unit interval, II

    E-Print Network [OSTI]

    Andrey Badanin; Evgeny Korotyaev

    2014-12-16

    We consider self-adjoint fourth order operators on the unit interval with the Dirichlet type boundary conditions. For such operators we determine few trace formulas, similar to the case of Gelfand--Levitan formulas for second order operators.

  13. On time-interval transformations in special relativity

    E-Print Network [OSTI]

    A. V. Gopala Rao; K. S. Mallesh; K. N. Srinivasa Rao

    2015-06-24

    We revisit the problem of the Lorentz transformation of time-intervals in special relativity. We base our discussion on the time-interval transformation formula $ c\\Delta t' = \\gamma (c\\Delta t - \\vec{\\beta} \\cdot \\Delta \\vec{r}) $ in which $ \\Delta t'$ and $ \\Delta t $ are the time-intervals between a given pair of events, in two inertial frames $ S $ and $ S'$ connected by an general boost. We observe that the Einstein time-dilation-formula, the Doppler formula and the relativity of simultaneity, all follow when one the frames in the time-interval transformation formula is chosen as the canonical frame of the underlying event-pair. We also discuss the interesting special case $ \\Delta t' = \\gamma \\Delta t $ of the time-interval transformation formula obtained by setting $ \\vec{\\beta} \\cdot \\Delta \\vec{r}=0 $ in it and argue why it is really \\textbf{not} the Einstein time-dilation formula. Finally, we present some examples which involve material particles instead of light rays, and highlight the utility of time-interval transformation formula as a calculational tool in the class room.

  14. Accident management information needs

    SciTech Connect (OSTI)

    Hanson, D.J.; Ward, L.W.; Nelson, W.R.; Meyer, O.R. (EG and G Idaho, Inc., Idaho Falls, ID (USA))

    1990-04-01

    In support of the US Nuclear Regulatory Commission (NRC) Accident Management Research Program, a methodology has been developed for identifying the plant information needs necessary for personnel involved in the management of an accident to diagnose that an accident is in progress, select and implement strategies to prevent or mitigate the accident, and monitor the effectiveness of these strategies. This report describes the methodology and presents an application of this methodology to a Pressurized Water Reactor (PWR) with a large dry containment. A risk-important severe accident sequence for a PWR is used to examine the capability of the existing measurements to supply the necessary information. The method includes an assessment of the effects of the sequence on the measurement availability including the effects of environmental conditions. The information needs and capabilities identified using this approach are also intended to form the basis for more comprehensive information needs assessment performed during the analyses and development of specific strategies for use in accident management prevention and mitigation. 3 refs., 16 figs., 7 tabs.

  15. Deployable telescope having a thin-film mirror and metering structure

    DOE Patents [OSTI]

    Krumel, Leslie J. (Cedar Crest, NM); Martin, Jeffrey W. (Albuquerque, NM)

    2010-08-24

    A deployable thin-film mirror telescope comprises a base structure and a metering structure. The base structure houses a thin-film mirror, which can be rolled for stowage and unrolled for deployment. The metering structure is coupled to the base structure and can be folded for stowage and unfolded for deployment. In the deployed state, the unrolled thin-film mirror forms a primary minor for the telescope and the unfolded metering structure positions a secondary minor for the telescope.

  16. The Impact of Rate Design and Net Metering on the Bill Savings...

    Open Energy Info (EERE)

    The Impact of Rate Design and Net Metering on the Bill Savings from Distributed Photovoltaics (PV) for Residential Customers in California Jump to: navigation, search Tool Summary...

  17. NREL: News - NREL Tool Finds Effective Behind-the-Meter Energy...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Printable Version News Release NR-1215 NREL Tool Finds Effective Behind-the-Meter Energy Storage Configurations Small battery systems can offer attractive return on investment...

  18. Uncertainty Analysis for a Virtual Flow Meter Using an Air-Handling Unit Chilled Water Valve

    SciTech Connect (OSTI)

    Song, Li; Wang, Gang; Brambley, Michael R.

    2013-04-28

    A virtual water flow meter is developed that uses the chilled water control valve on an air-handling unit as a measurement device. The flow rate of water through the valve is calculated using the differential pressure across the valve and its associated coil, the valve command, and an empirically determined valve characteristic curve. Thus, the probability of error in the measurements is significantly greater than for conventionally manufactured flow meters. In this paper, mathematical models are developed and used to conduct uncertainty analysis for the virtual flow meter, and the results from the virtual meter are compared to measurements made with an ultrasonic flow meter. Theoretical uncertainty analysis shows that the total uncertainty in flow rates from the virtual flow meter is 1.46% with 95% confidence; comparison of virtual flow meter results with measurements from an ultrasonic flow meter yielded anuncertainty of 1.46% with 99% confidence. The comparable results from the theoretical uncertainty analysis and empirical comparison with the ultrasonic flow meter corroborate each other, and tend to validate the approach to computationally estimating uncertainty for virtual sensors introduced in this study.

  19. Smart-Metering for Monitoring Building Power Distribution Network using Instantaneous Phasor Computations of Electrical Signals

    E-Print Network [OSTI]

    K.R., Krishnanand

    2013-01-01

    phase smart meter . in Electrical and Control Engineering (Phasor Computations of Electrical Signals Krishnanand K.R. ,Panda* Department of Electrical and Computer Engineering,

  20. Unlocking the potential for efficiency and demand response through advanced metering

    E-Print Network [OSTI]

    Levy, Roger; Herter, Karen; Wilson, John

    2004-01-01

    Advanced Metering, Demand Response, and Dynamic Pricing. ”for Efficiency and Demand Response through Advanced Meteringenergy efficiency and demand response programs. Without

  1. NREL Tool Finds Effective Behind-the-Meter Energy Storage Configuratio...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Effective Behind-the-Meter Energy Storage Configurations Small battery systems can offer attractive return on investment March 9, 2015 The Energy Department's (DOE) National...

  2. Flow Measurement with Tangential Paddlewheel Flow Meters: Analysis of Experimental Results and in-situ Diagnostics 

    E-Print Network [OSTI]

    Watt, J. B.; Haberl, J. S.

    1994-01-01

    or generate a totalized signal that can be recorded by data acquisition system. The accuracy of totalized flow and energy measurements is directly effected by the quality of thermal and flow measurement devices. In a closed-loop system a thermal energy meter... possible solution is to use a frequency to voltage converter between the magnetic paddlewheel flow meter and thermal energy meter to transform the sine wave to a square wave much like the signal generated by the non-magnetic-type meter (Doeblin 1990...

  3. Use of Rapid Temperature Measurements at a 2-Meter Depth to Augment...

    Open Energy Info (EERE)

    Temperature Measurements at a 2-Meter Depth to Augment Deeper Temperature Gradient Drilling Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Paper:...

  4. Experience in the Application of Single-Beam Ultrasonic Flow Meters for Turbines

    SciTech Connect (OSTI)

    Krasilnikov, A. M.; Dmitriev, S. G.; Karyakin, V. A.

    2002-03-15

    Experience in the use of ultrasonic flow meters at the Bratskaya and Vilyuiskaya HPP is described. The article is of interest to field engineers.

  5. The Economic Value of PV and Net Metering to Residential Customers in California

    E-Print Network [OSTI]

    Darghouth, Naim

    2010-01-01

    Beck. “Distributed Renewable Energy Operating Impacts andGolden, CO: National Renewable Energy Laboratory, 2009.State Incentives for Renewable Energy). “Map of Net Metering

  6. Interval estimation in calibration problems: an alternate approach 

    E-Print Network [OSTI]

    Quaino, Oscar Rodolfo

    1983-01-01

    measurement of the dependent varia- ble. This interval will depend upon the dependent variable and also on the outcome of the calibration experiment. For each unknown a state- ment is made in the sense that it belongs to the interval. Then he searches... is computed as 2 n , 1(yi ? y) Ss n ? 2 and will also be denoted by NSE. (2. 2) In the calibration problem, the classical estimator of x* given an obsezvation y* is y* ? b 0 x* bl Under the normality assumption x" is the NLE of x* (Graybill 1976...

  7. Interval eigenproblem in tropical and fuzzy algebra Tolerance eigenproblem in tropical algebra

    E-Print Network [OSTI]

    Mitchener, Paul

    Interval eigenproblem in tropical and fuzzy algebra Tolerance eigenproblem in tropical algebra Tolerance eigenproblem in fuzzy algebra Tolerance interval eigenvectors in tropical and fuzzy algebra Martin Workshop Birmingham, May 16, 2013 #12;Interval eigenproblem in tropical and fuzzy algebra Tolerance

  8. Smart Meter Driven Segmentation: What Your Consumption Says About You

    SciTech Connect (OSTI)

    Albert, A; Rajagopal, R

    2013-11-01

    With the rollout of smart metering infrastructure at scale, demand-response (DR) programs may now be tailored based on users' consumption patterns as mined from sensed data. For issuing DR events it is key to understand the inter-temporal consumption dynamics as to appropriately segment the user population. We propose to infer occupancy states from consumption time series data using a hidden Markov model framework. Occupancy is characterized in this model by 1) magnitude, 2) duration, and 3) variability. We show that users may be grouped according to their consumption patterns into groups that exhibit qualitatively different dynamics that may be exploited for program enrollment purposes. We investigate empirically the information that residential energy consumers' temporal energy demand patterns characterized by these three dimensions may convey about their demographic, household, and appliance stock characteristics. Our analysis shows that temporal patterns in the user's consumption data can predict with good accuracy certain user characteristics. We use this framework to argue that there is a large degree of individual predictability in user consumption at a population level.

  9. Ash level meter for a fixed-bed coal gasifier

    DOE Patents [OSTI]

    Fasching, George E. (Morgantown, WV)

    1984-01-01

    An ash level meter for a fixed-bed coal gasifier is provided which utilizes the known ash level temperature profile to monitor the ash bed level. A bed stirrer which travels up and down through the extent of the bed ash level is modified by installing thermocouples to measure the bed temperature as the stirrer travels through the stirring cycle. The temperature measurement signals are transmitted to an electronic signal process system by an FM/FM telemetry system. The processing system uses the temperature signals together with an analog stirrer position signal, taken from a position transducer disposed to measure the stirrer position to compute the vertical location of the ash zone upper boundary. The circuit determines the fraction of each total stirrer cycle time the stirrer-derived bed temperature is below a selected set point, multiplies this fraction by the average stirrer signal level, multiplies this result by an appropriate constant and adds another constant such that a 1 to 5 volt signal from the processor corresponds to a 0 to 30 inch span of the ash upper boundary level. Three individual counters in the processor store clock counts that are representative of: (1) the time the stirrer temperature is below the set point (500.degree. F.), (2) the time duration of the corresponding stirrer travel cycle, and (3) the corresponding average stirrer vertical position. The inputs to all three counters are disconnected during any period that the stirrer is stopped, eliminating corruption of the measurement by stirrer stoppage.

  10. Towards Reliable SubDivision of Geological Areas: Interval Approach

    E-Print Network [OSTI]

    Kreinovich, Vladik

    Towards Reliable Sub­Division of Geological Areas: Interval Approach David D. Coblentz 1;2 , Vladik difficult to produce a reliable subdivision. The subdivision of a geological zone into segments is often, and often, we do not have a statistically sufficient amount of thoroughly analyzed geological samples

  11. Towards Reliable SubDivision of Geological Areas: Interval Approach

    E-Print Network [OSTI]

    Kreinovich, Vladik

    Towards Reliable Sub­Division of Geological Areas: Interval Approach David D. Coblentz 1;2 , Vladik Difficult to Produce a Reliable Subdivision The subdivision of a geological zone into segments is often the area, and often, we do not have a statistically sufficient amount of thoroughly analyzed geological

  12. Interval methods for computing various refinements of Nash equilibria

    E-Print Network [OSTI]

    Sainudiin, Raazesh

    Interval methods for computing various refinements of Nash equilibria Bartlomiej Jacek Kubica, assumptions on their knowledge, ... Concepts: Dominant strategy equilibrium. The Nash equilibrium. The core of a game (for cooperative games). ... #12;Nash equilibrium Let the game (X1 ,...,Xn ;q1 ,...,qn

  13. Beam casting implicit surfaces on the GPU with interval arithmetic

    E-Print Network [OSTI]

    de Figueiredo, Luiz Henrique

    Beam casting implicit surfaces on the GPU with interval arithmetic Francisco Ganacim, Luiz Henrique, Brazil Abstract--We present a GPU-based beam-casting method for rendering implicit surfaces in real time. INTRODUCTION Rendering surfaces with ray casting is perhaps the clearest example of a potentially

  14. Proton aurora related to intervals of pulsations of diminishing periods

    E-Print Network [OSTI]

    California at Berkeley, University of

    Proton aurora related to intervals of pulsations of diminishing periods A. G. Yahnin,1 T. A are generated because of a cyclotron instability of the anisotropic distribution of ring current ions. Proton precipitation produced by the cyclotron instability can be responsible for proton aurora. Indeed

  15. Inferring Positional Homologs with Common Intervals of Sequences

    E-Print Network [OSTI]

    Chauve, Cedric

    genes is an important problem in whole genomes comparisons, both for functional or evolu- tionary between genomes, also called po- sitional homologs, based on the conservation of the genomic context. We consider genomes represented by their gene order ­ i.e. sequences of signed integers ­ and common intervals

  16. CIGAL: Common Intervals Global ALigner Guillaume Blin1

    E-Print Network [OSTI]

    Chauve, Cedric

    alignment [5]. We recycle this idea to align gene orders. Our data consist in two genomes represented by two sequences of signed identifiers. Those identifiers can be genes, gene families, or any other kind of genomic two genomes [3]. The problem of finding a maximal cover with a minimal num- ber of common intervals

  17. Comparing Bacterial Genomes by Searching their Common Intervals

    E-Print Network [OSTI]

    Fertin, Guillaume

    Comparing Bacterial Genomes by Searching their Common Intervals S´ebastien Angibaud, Damien. Comparing bacterial genomes implies the use of a dedicated measure. It relies on comparing circular genomes genomes that takes into account duplications. Its application on a concrete case, comparing E. coli and V

  18. A multi-interval MBSC theory for active correlations technique

    E-Print Network [OSTI]

    Tsyganov, Yu S

    2015-01-01

    The purpose of the paper is the development of the formalism for the treatment of rare events especially, when one applies active correlation method to suppress background products in the heavy ion induced complete fusion nuclear reactions. This formalism in fact is an extension of classical background signal combinations formalism for the case of time multi intervals.

  19. Reverse Auction Bidding-Bid Time Intervals Analysis 

    E-Print Network [OSTI]

    Xiao, Mengyan

    2015-05-11

    the computer is bidding during the segment 1 of each section, it shall randomly select from 2 seconds to 23 seconds as its time-intervals. Rule 2, when the computer is bidding during the segment 2 of each section, it shall randomly select from 2 seconds to 9...

  20. Top Needs of Occupy Sites

    E-Print Network [OSTI]

    Baldwin, J.R.

    2012-01-01

    Individuals Occupy Sourcing Top Needs of Occupy Sites Art byand Social Media in Colombia Top Needs of Occupy Sites J.R.Baldwin collects the top needs of Occupy sites across the

  1. Progress on the 1.6-meter New Solar Telescope at Big Bear Solar Observatory

    E-Print Network [OSTI]

    of the drivers for building solar telescopes with large apertures. Recent advances in adaptive optics (AO) make it possible to build solar telescopes in an open configuration and thus go beyond the conventional meterProgress on the 1.6-meter New Solar Telescope at Big Bear Solar Observatory C. Denkera, P. R

  2. Current Experience With Net Metering Programs Yih-huei Wan, NREL

    E-Print Network [OSTI]

    metering, small customer-owned generators are usually treated by electric utilities as if they were and sale agreement with the utilities. Utilities always install two meters for each account to record. These customers pay retail rates for the energy they use, and the utilities reimburse customers at the utility

  3. Towards a Secure, Wireless-Based, Home Area Network for Metering in Smart Grids

    E-Print Network [OSTI]

    Namboodiri, Vinod

    1 Towards a Secure, Wireless-Based, Home Area Network for Metering in Smart Grids Vinod Namboodiri, Student Member, IEEE, Ward Jewell, Fellow, IEEE Abstract--Compared to the conventional grid, the smart (AMI), commonly known as the smart meter, which has the capability of supporting various functions

  4. HeatProbe: A Thermal-based Power Meter for Accounting Disaggregated Electricity Usage

    E-Print Network [OSTI]

    Chu, Hao-hua

    consumer awareness of energy usage behavior. This study proposes HeatProbe, a thermal-based power meterHeatProbe: A Thermal-based Power Meter for Accounting Disaggregated Electricity Usage Bo-Jhang Ho1}@citi.sinica.edu.tw ABSTRACT To promote energy-saving behavior, disaggregating elec- tricity usage is critical for increasing

  5. A robust and scalable microfluidic metering method that allows protein crystal growth by free

    E-Print Network [OSTI]

    Quake, Stephen R.

    A robust and scalable microfluidic metering method that allows protein crystal growth by free in a microfluidic device is a challenging problem. We developed a scheme for metering fluids on the picoliter scale fluid. We demonstrated the power of this method by fabricating and testing a microfluidic chip for rapid

  6. IEEE TRANSACTIONS ON SMART GRID 1 A Response Cost Model for Advanced Metering

    E-Print Network [OSTI]

    Sanders, William H.

    Metering Infras- tructure (AMI). The cost model reflects the costs of response actions due to outages of the challenge is the requirement for a cost model that can accurately predict the costs of possible responseIEEE TRANSACTIONS ON SMART GRID 1 A Response Cost Model for Advanced Metering Infrastructures Ahmed

  7. Quantum noise of non-ideal Sagnac speed meter interferometer with asymmetries

    E-Print Network [OSTI]

    S. L. Danilishin; C. Graef; S. S. Leavey; J. Hennig; E. A. Houston; D. Pascucci; S. Steinlechner; J. Wright; S. Hild

    2015-02-19

    The speed meter concept has been identified as a technique that can potentially provide laser-interferometric measurements at a sensitivity level which surpasses the Standard Quantum Limit (SQL) over a broad frequency range. As with other sub-SQL measurement techniques, losses play a central role in speed meter interferometers and they ultimately determine the quantum noise limited sensitivity that can be achieved. So far in the literature, the quantum noise limited sensitivity has only been derived for lossless or lossy cases using certain approximations (for instance that the arm cavity round trip loss is small compared to the arm cavity mirror transmission). In this article we present a generalised, analytical treatment of losses in speed meters that allows accurate calculation of the quantum noise limited sensitivity of Sagnac speed meters with arm cavities. In addition, our analysis allows us to take into account potential imperfections in the interferometer such as an asymmetric beam splitter or differences of the reflectivities of the two arm cavity input mirrors. Finally,we use the examples of the proof-of-concept Sagnac speed meter currently under construction in Glasgow and a potential implementation of a Sagnac speed meter in the Einstein Telescope (ET) to illustrate how our findings affect Sagnac speed meters with meter- and kilometre-long baselines.

  8. Trinity College Green Week 2012 Energy Competition Win a Domestic Energy Meter

    E-Print Network [OSTI]

    O'Mahony, Donal E.

    Trinity College Green Week 2012 Energy Competition ­ Win a Domestic Energy Meter As part of College Green Week the "e3" programme and Director of Buildings Office is promoting an energy related would you like to win a domestic whole house energy meter as part of Trinity College Green Week 2012

  9. The Practical Applications of Net Energy Metering (NEM) By: Ken Linder and Katie Noland

    E-Print Network [OSTI]

    Maxwell, Bruce D.

    Applications of Net Energy Metering (NEM) By: Ken Linder and Katie Noland Recommendations: Currently the Net Energy Metering (NEM) law in accordance to Montana state policy caps the amount of energy reimbursable by utility companies for personal production of energy. The goal of the capstone class policy group is to put

  10. Power Line Carrier (PLC) Signal Analysis of Smart Meters for Outlier Detection

    E-Print Network [OSTI]

    Akella, Srinivas

    Power Line Carrier (PLC) Signal Analysis of Smart Meters for Outlier Detection Rakesh Rao Dept-- A method for identifying outliers among a set of smart meters by using the power line carrier (PLC) signal strength is presented in this paper. The broad goal is to use the PLC signal as a predictor of transmission

  11. Energy Metering for Free: Augmenting Switching Regulators for Real-Time Monitoring

    E-Print Network [OSTI]

    Count, a new energy meter design. For many systems that have a built-in switching regulator, adding a single. A typical system with switching regulator- based power supply, including the regulator, in- put capacitorEnergy Metering for Free: Augmenting Switching Regulators for Real-Time Monitoring Prabal Dutta

  12. Social Network of Smart-Metered Homes and SMEs for Grid-based Renewable Energy Exchange

    E-Print Network [OSTI]

    Steels, Luc

    Social Network of Smart-Metered Homes and SMEs for Grid-based Renewable Energy Exchange Ioana G-smart-meter; demand-response; social network; community; prosumer; renewable energy; energy efficiency I. INTRODUCTION are the renewable energy sources (completely) integrated in the picture. This creates an imbalance of financial

  13. Evaluating Government's Policies on Promoting Smart Metering Diffusion in Retail Electricity Markets via

    E-Print Network [OSTI]

    Tesfatsion, Leigh

    recommendations for the energy mar- ket is the adoption of smart metering technology, which, in addition for monitoring and billing purposes (Ofgem, 2006a). As a novel technology in the U.K. energy market, smart policies on promoting smart metering technology in its 2007 white paper on energy Meeting the Energy

  14. Behavioral/Systems/Cognitive Selective Neuronal Entrainment to the Beat and Meter

    E-Print Network [OSTI]

    Behavioral/Systems/Cognitive Selective Neuronal Entrainment to the Beat and Meter Embedded the spontaneous building of beat and meter hypothesized to emerge from the selective entrainment of neuronal, possibly through a mechanism of selective neuronal entrainment within a resonance frequency range. Taken

  15. Behavioral/Systems/Cognitive Tagging the Neuronal Entrainment to Beat and Meter

    E-Print Network [OSTI]

    Behavioral/Systems/Cognitive Tagging the Neuronal Entrainment to Beat and Meter Sylvie Nozaradan,1 entrainment to beat and meter can be captured directly in the electroencephalogram. More generally, our results suggest that music constitutes a unique context to explore entrainment phenomena in dynamic

  16. Integrated Circuits Metering for Piracy Protection and Digital Rights Management: An Overview

    E-Print Network [OSTI]

    ICs fabricated by the same mask is a precursor for metering: In passive metering, the ICs- sign houses is outsourced to developing offshore countries with a lower labor overhead and operational such as OASIS format) are clandestine to the design house. Further- more, the scale, complexity, and opaqueness

  17. Energy-Harvesting Thermoelectric Sensing for Unobtrusive Water and Appliance Metering

    E-Print Network [OSTI]

    Cafarella, Michael J.

    Energy-Harvesting Thermoelectric Sensing for Unobtrusive Water and Appliance Metering Bradford that meters using the same thermoelectric generator with which it powers itself. In short, the rate at which be harvested with a thermoelectric generator (TEG) to power a sensor node. TEGs utilize the Seebeck effect

  18. Oak Ridge Reservation Needs Assessment

    Broader source: Energy.gov [DOE]

    Needs Assessment for former Oak Ridge National Laboratory and Y-12 Nuclear Security Complex production workers.

  19. Characterizing minimal interval completions: Towards better understanding of profile and pathwidth #

    E-Print Network [OSTI]

    Todinca, Ioan

    Characterizing minimal interval completions: Towards better understanding of profile and pathwidth # Pinar Heggernes + Karol Suchan #§ Ioan Todinca # Yngve Villanger + Abstract Minimal interval completions. An interval completion of a given graph is an interval supergraph of it on the same vertex set, obtained

  20. Evaluating Government's Policies on Promoting Smart Metering in Retail Electricity Markets via Agent Based Simulation

    E-Print Network [OSTI]

    Zhang, Tao; Nuttall, William J.

    these policies are in terms of fostering smart metering and what other supplementary optimum strategies can be used to strengthen the effectiveness of these policies in the UK energy market still remain questionable. This paper is motivated by a desire... is the adoption of smart metering technology, which, in addition to offering a broad range of benefits to energy consumers, can substantially cut CO2 emissions. As a novel technology, in the UK energy market smart metering is still in its infancy and its...

  1. Instrument Qualification of Custom Fabricated Water Activity Meter for Hot Cell Use

    SciTech Connect (OSTI)

    McCoskey, Jacob K.

    2014-01-22

    This report describes a custom fabricated water activity meter and the results of the qualification of this meter as described in the laboratory test plan LAB-PLN-11-00012, Testing and Validation of an Enhanced Acquisition and Control System. It was calibrated against several NaOH solutions of varying concentrations to quantify the accuracy and precision of the instrument at 20 °C and 60 °C. Also, a schematic and parts list of the equipment used to make the water activity meter will be presented in this report.

  2. Payment Matters? - An Exploratory Study into the Pre-Payment Electricity Metering

    E-Print Network [OSTI]

    Brutscher, Philipp-Bastian

    2011-02-10

    ?(Pruitt, B., 2004) and the Woddstock Hydro evaluation (reported in Quesnelle, K., 2004). However, we could not ?nd much information on these projects - in particular little is known about the method(s) which were used in these studies. 11 3.3 Matching... entering it into one?s meter at home). Finally, let i denote the interest rate; we can interpret i as a measure of the opportunity cost of holding money on one?s meter (since money on a meter does not bear interest). Now we can analyse the optimal choice...

  3. Private Memoirs of a Smart Meter Andres Molina-Markham, Prashant Shenoy, Kevin Fu, Emmanuel Cecchet, and David Irwin

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Private Memoirs of a Smart Meter Andr´es Molina-Markham, Prashant Shenoy, Kevin Fu, Emmanuel,shenoy,kevinfu,cecchet,irwin}@cs.umass.edu Abstract Household smart meters that measure power consumption in real-time at fine granularities are the foundation of a future smart electricity grid. However, the widespread deployment of smart meters has serious

  4. "I'd Like to Check Out Two Books, One DVD, and One Electrical Meter, Please."

    Broader source: Energy.gov [DOE]

    Yesterday I wrote about my experience using a digital electrical meter at home. Today I'll discuss what I'm doing with promoting their use in my home town.

  5. Smart-Metering for Monitoring Building Power Distribution Network using Instantaneous Phasor Computations of Electrical Signals

    E-Print Network [OSTI]

    K.R., Krishnanand

    2013-01-01

    power meter for AMI based on ZigBee communication . in Powerusing IEEE 802.15.4 and zigbee. Consumer Electronics, IEEEInfrastructure (AMI) based on ZigBee is not entirely new [8-

  6. Smart-Metering for Monitoring Building Power Distribution Network using Instantaneous Phasor Computations of Electrical Signals

    E-Print Network [OSTI]

    K.R., Krishnanand

    2013-01-01

    Man, H. and L. Jae-Hyun, Smart home energy management systemand implementation of smart home energy management systemsSocial network of smart-metered homes and SMEs for grid-

  7. The effects between two slotted plate flow meter under single, two, three components flow condition 

    E-Print Network [OSTI]

    Park, Sang Hyan

    2005-02-17

    In previous work on the slotted flow meter, repeatibility and reproducibility were studied under different flow conditions and different configurations. In accordance with previous work, the effects of the distance between ...

  8. Too expensive to meter: The influence of transaction costs in transportation and

    E-Print Network [OSTI]

    Odlyzko, Andrew M.

    , London Underground, London railways, collection costs, transaction costs, public transport 1Too expensive to meter: The influence of transaction costs in transportation and communication, and that in many cases such charging may lead to undesirable outcomes. Keywords: Transport, Telecommunications

  9. Tips: Smart Meters and a Smarter Power Grid | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    July 27, 2014 - 8:13pm Addthis The Smart Grid will consist of controls, computers, automation, and new technologies and equipment -- including a smart meter at your home --...

  10. Optimal meter placement and transaction-based loss allocation in deregulated power system operation 

    E-Print Network [OSTI]

    Ding, Qifeng

    2005-02-17

    is the selection of candidate measurement sets, each of which will make the system observable under a given contingency (loss of measurements and network topology changes). A new method is then developed for optimal meter placement, which is the choice...

  11. The Economic Value of PV and Net Metering to Residential Customers in California

    E-Print Network [OSTI]

    Darghouth, Naim

    2010-01-01

    a Substantial Benefit of Solar PV”, The Electricity Journal,2008. MRW & Associates. “Solar PV and Retail Rate Design”,The Economic Value of PV and Net Metering to Residential

  12. Proposed Metering and Instrumentation Monitoring and Analysis Plan and Budget: Alamo Community College District 

    E-Print Network [OSTI]

    O'Neal, D. L.; Carlson, K. A.; Sweeney, J., Jr.; Milligan, K.

    2002-01-01

    The purpose of this overview is to outline the metering points that will be monitored by the Energy Systems Laboratory (ESL). At three of the campuses, Alamo Community College District (ACCD) has a central energy management system (EMS) installed...

  13. Estimation of Building Parameters Using Simplified Energy Balance Model and Metered Whole Building Energy Use 

    E-Print Network [OSTI]

    Masuda, H.; Claridge, D.

    2012-01-01

    This paper presents and evaluates an indirect data-driven method to estimate influential building parameters: air exchange rates and overall heat transfer coefficients of building envelopes from the separately metered energy use for electricity...

  14. Using Wireless Power Meters to Measure Energy Use of Miscellaneous and Electronic Devices in Buildings

    E-Print Network [OSTI]

    Brown, Richard

    2012-01-01

    a High-Fidelity Wireless Building Energy Auditing Network.energy and power data using small, relatively inexpensive wirelessUsing Wireless Power Meters to Measure Energy Use of

  15. Metered energy consumption and analysis of energy conservation techniques in desktop PCs and workstations

    E-Print Network [OSTI]

    Bosko, Kristie L. (Kristie Lee)

    1996-01-01

    This thesis investigates potential energy savings due to the application of power managed PCS, monitors, and workstations. The basis of this effort includes electric metering of such equipment at six preliminary and one ...

  16. LBNL Frequently Needed Proposal Information

    E-Print Network [OSTI]

    06/05/2014 LBNL Frequently Needed Proposal Information Frequently Needed Proposal information is LBNL Institutional Information that may be required to complete proposals and grant applications. If you do not find the institutional information you need, please contact your OSPIP Contracts Officer

  17. Holographic Calculation for Large Interval Rényi Entropy at High Temperature

    E-Print Network [OSTI]

    Bin Chen; Jie-qiang Wu

    2015-06-10

    In this paper, we study the holographic R\\'enyi entropy of a large interval on a circle at high temperature for the two-dimensional CFT dual to pure AdS$_3$ gravity. In the field theory, the R\\'enyi entropy is encoded in the CFT partition function on $n$-sheeted torus connected with each other by a large branch cut. As proposed in 1412.0763, the effective way to read the entropy in the large interval limit is to insert a complete set of state bases of the twist sector at the branch cut. Then the calculation transforms into an expansion of four-point functions in the twist sector with respect to $e^{-\\frac{2\\pi TR}{n}}$. By using the operator product expansion of the twist operators at the branch points, we read the first few terms of the R\\'enyi entropy, including the leading and next-leading contributions in the large central charge limit. Moreover, we show that the leading contribution is actually captured by the twist vacuum module. In this case by the Ward identity the four-point functions can be derived from the correlation function of four twist operators, which is related to double interval entanglement entropy. Holographically, we apply the recipe in 1303.7221 and 1306.4682 to compute the classical R\\'enyi entropy and its 1-loop quantum correction, after imposing a new set of monodromy conditions. The holographic classical result matches exactly with the leading contribution in the field theory up to $e^{-4\\pi TR}$ and $l^6$, while the holographical 1-loop contribution is in exact agreement with next-leading results in field theory up to $e^{-\\frac{6\\pi TR}{n}}$ and $l^4$ as well.

  18. A study of the coherent structures and installation effects in an orifice flow meter 

    E-Print Network [OSTI]

    Pattabhi, Srikanth

    1993-01-01

    of MASTER OF SCIENCE August 1993 Major Subject: Mechanical Engineering A STUDY OF THE COHERENT STRUCTURES AND INSTALLATION EFFECTS IN AN ORIFICE FLOW METER A Thesis by SRIKANTH PATTABHI Approved as to style and content by: G. L. Morris (Chair...) Srikanth Pattabhi, B, E, University of Mysore, India Chair of Advisory Committee: Dr. G. L. Morrison Orifice meters are used extensively in the natural gas industry for custody transfer, an application where inaccuracies in measurement can be costly...

  19. Solutions to Dr. Z.'s Math 421(1), (Fall 2014, RU) REAL Quiz #4 1. Show that the given functions are orthogonal on the given interval.

    E-Print Network [OSTI]

    Zeilberger, Doron

    nx}, n = 1, 2, . . . is orthogonal over the interval [0, ]. Also find the norm of each function. Sol. We need to take two different, typical members of this family, so let's call them cos nx and cos mx, where n = m. We have to show that (cos mx, cos nx) = 0. (cos mx, cos nx) = 0 cos mx cos nx dx . We now

  20. Deployment of Behind-The-Meter Energy Storage for Demand Charge...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    represented. The degree to which this affects our results has not been quantified. The solar irradiance data were collected at 1-second intervals throughout the entire year of...

  1. Using Wireless Power Meters to Measure Energy Use of Miscellaneous and Electronic Devices in Buildings

    SciTech Connect (OSTI)

    UC Berkeley, Berkeley, CA USA; Brown, Richard; Lanzisera, Steven; Cheung, Hoi Ying; Lai, Judy; Jiang, Xiaofan; Dawson-Haggerty, Stephen; Taneja, Jay; Ortiz, Jorge; Culler, David

    2011-05-24

    Miscellaneous and electronic devices consume about one-third of the primary energy used in U.S. buildings, and their energy use is increasing faster than other end-uses. Despite the success of policies, such as Energy Star, that promote more efficient miscellaneous and electronic products, much remains to be done to address the energy use of these devices if we are to achieve our energy and carbon reduction goals. Developing efficiency strategies for these products depends on better data about their actual usage, but very few studies have collected field data on the long-term energy used by a large sample of devices due to the difficulty and expense of collecting device-level energy data. This paper describes the development of an improved method for collecting device-level energy and power data using small, relatively inexpensive wireless power meters. These meters form a mesh network based on Internet standard protocols and can form networks of hundreds of metering points in a single building. Because the meters are relatively inexpensive and do not require manual data downloading, they can be left in the field for months or years to collect long time-series energy use data. In addition to the metering technology, we also describe a field protocol used to collect comprehensive, robust data on the miscellaneous and electronic devices in a building. The paper presents sample results from several case study buildings, in which all the plug-in devices for several homes were metered, and a representative sample of several hundred plug-in devices in a commercial office building were metered for several months.

  2. Setting confidence intervals for bounded parameters a different perspective

    E-Print Network [OSTI]

    Fraser, D A S; Wong, A C M

    2003-01-01

    The estimation of signal frequency count in the presence of background noise has had much recent discussion in the physics literature, and Mandelkern [1] brings the core issues to the statistical community, in turn leading to extensive discussion by statisticians. The primary focus in [1] and in the discussion rests on confidence interval procedures. We discuss various anomalies and misleading features in this use of confidence theory, and argue that the usage is essentially decision theoretic and is being applied in a context that invites an inferential approach. We then extract what we view as the inference elements, the fundamental information available from the model and the data. This is illustrated using some simple data and some recent data from the physics literature.

  3. Coronal inflows during the interval 1996-2014

    SciTech Connect (OSTI)

    Sheeley, N. R. Jr.; Wang, Y.-M. [Space Science Division, Naval Research Laboratory, Washington DC 20375-5352 (United States)

    2014-12-10

    We extend our previous counts of coronal inflows from the 5 yr interval 1996-2001 to the 18 yr interval 1996-2014. By comparing stackplots of these counts with similar stackplots of the source-surface magnetic field and its longitudinal gradient, we find that the inflows occur in long-lived streams with counting rates in excess of 18 inflows per day at sector boundaries where the gradient exceeds 0.22 G rad{sup –1}. These streams are responsible for the high (86%) correlation between the inflow rate and the longitudinal field gradient. The overall inflow rate was several times larger in sunspot cycle 23 than it has been so far in cycle 24, reflecting the relatively weak source-surface fields during this cycle. By comparison, in cycles 21-22, the source-surface field and its gradient had bursts of great strength, as if large numbers of inflows occurred during those cycles. We find no obvious relation between inflows and coronal mass ejections (CMEs) on timescales of days to weeks, regardless of the speeds of the CMEs, and only a 60% correlation on timescales of months, provided the CMEs are fast (V > 600 km s{sup –1}). We conclude that most of the flux carried out by CMEs is returned to the Sun via field line reconnection well below the 2.0 R {sub ?} inner limit of the LASCO field of view, and that the remainder accumulates in the outer corona for an eventual return at sector boundaries.

  4. State Energy Data Needs Assessment

    Reports and Publications (EIA)

    2009-01-01

    This report responds to Section 805(d) of the Energy Independence and Security Act of 2007 (EISA), Public Law 110-140, requiring the Energy Information Administration to assess State-level energy data needs and submit to Congress a plan to address those needs.

  5. DIMACS Technical Report 2004-30 k-Interval-filament graphs

    E-Print Network [OSTI]

    DIMACS Technical Report 2004-30 June 2004 k-Interval-filament graphs by Fanica GAVRIL1 DIMACS segment. In PL, above L, construct to each interval i(v)I a filament v connecting its two endpoints, such that for every two filaments u,v having uv and disjoint intervals i(u)filaments w with i

  6. Optical position meters analyzed in the non-inertial reference frames

    E-Print Network [OSTI]

    Sergey P. Tarabrin; Alexander A. Seleznyov

    2008-09-03

    In the framework of General Relativity we develop a method for analysis of the operation of the optical position meters in their photodetectors proper reference frames. These frames are non-inertial in general due to the action of external fluctuative forces on meters test masses, including detectors. For comparison we also perform the calculations in the laboratory (globally inertial) reference frame and demonstrate that for certain optical schemes laboratory-based analysis results in unmeasurable quantities, in contrast to the detector-based analysis. We also calculate the response of the simplest optical meters to weak plane gravitational waves and fluctuative motions of their test masses. It is demonstrated that for the round-trip meter analysis in both the transverse-traceless (TT) and local Lorentz (LL) gauges produces equal results, while for the forward-trip meter corresponding results differ in accordance with different physical assumptions (e.g. procedure of clocks synchronization) implicitly underlying the construction of the TT and LL gauges.

  7. OTRA-THS MAC to reduce Power Outage Data Collection Latency in a smart meter network

    SciTech Connect (OSTI)

    Garlapati, Shravan K; Kuruganti, Phani Teja; Buehrer, Richard M; Reed, Jeffrey H

    2014-01-01

    The deployment of advanced metering infrastructure by the electric utilities poses unique communication challenges, particularly as the number of meters per aggregator increases. During a power outage, a smart meter tries to report it instantaneously to the electric utility. In a densely populated residential/industrial locality, it is possible that a large number of smart meters simultaneously try to get access to the communication network to report the power outage. If the number of smart meters is very high of the order of tens of thousands (metropolitan areas), the power outage data flooding can lead to Random Access CHannel (RACH) congestion. Several utilities are considering the use of cellular network for smart meter communications. In 3G/4G cellular networks, RACH congestion not only leads to collisions, retransmissions and increased RACH delays, but also has the potential to disrupt the dedicated traffic flow by increasing the interference levels (3G CDMA). In order to overcome this problem, in this paper we propose a Time Hierarchical Scheme (THS) that reduces the intensity of power outage data flooding and power outage reporting delay by 6/7th, and 17/18th when compared to their respective values without THS. Also, we propose an Optimum Transmission Rate Adaptive (OTRA) MAC to optimize the latency in power outage data collection. The analysis and simulation results presented in this paper show that both the OTRA and THS features of the proposed MAC results in a Power Outage Data Collection Latency (PODCL) that is 1/10th of the 4G LTE PODCL.

  8. Monitoring the Thermal Power of Nuclear Reactors with a Prototype Cubic Meter Antineutrino Detector

    E-Print Network [OSTI]

    A. Bernstein; N. S. Bowden; A. Misner; T. Palmer

    2008-04-30

    In this paper, we estimate how quickly and how precisely a reactor's operational status and thermal power can be monitored over hour to month time scales, using the antineutrino rate as measured by a cubic meter scale detector. Our results are obtained from a detector we have deployed and operated at 25 meter standoff from a reactor core. This prototype can detect a prompt reactor shutdown within five hours, and monitor relative thermal power to three percent within seven days. Monitoring of short-term power changes in this way may be useful in the context of International Atomic Energy Agency's (IAEA) Reactor Safeguards Regime, or other cooperative monitoring regimes.

  9. Advanced Metering Plan for Monitoring Energy and Potable Water Use in PNNL EMS4 Buildings

    SciTech Connect (OSTI)

    Pope, Jason E.; Olson, Norman J.; Berman, Marc J.; Schielke, Dale R.

    2011-08-17

    This updated Advanced Metering Plan for monitoring whole building energy use in Pacific Northwest National Laboratory (PNNL) EMS4 buildings on the PNNL campus has been prepared in accordance with the requirements of the Energy Policy Act of 2005 (EPAct 2005), Section 103, U.S. Department of Energy (DOE) Order 430.2B, and Metering Best Practices, A Guide to Achieving Utility Resource Efficiency, Federal Energy Management Program, October 2007 (Sullivan et al. 2007). The initial PNNL plan was developed in July 2007 (Olson 2007), updated in September 2008 (Olson et al. 2008), updated in September 2009 (Olson et al. 2009), and updated again in August 2010 (Olson et al. 2010).

  10. Improvements to the Rocky Flats Metrology Laboratories Velocity Meter Calibration System

    SciTech Connect (OSTI)

    Abercrombie, K.R.

    1992-03-12

    The Rocky Flats Standards Laboratory has undertaken a project to improve calibration of air velocity meters by reducing the uncertainty of the Velocity Meter Calibration System. The project was accomplished by analyzing the governing equation in order to determine which areas within the system contributed most to the overall system uncertainty. Then, based upon this new analysis, new components were selected to replace the components identified in the analysis. Finally, the system was re-evaluated to determine the new systematic uncertainty for the system.

  11. Monitoring the Thermal Power of Nuclear Reactors with a Prototype Cubic Meter Antineutrino Detector

    E-Print Network [OSTI]

    Bernstein, A; Misner, A; Palmer, T

    2008-01-01

    In this paper, we estimate how quickly and how precisely a reactor's operational status and thermal power can be monitored over hour to month time scales, using the antineutrino rate as measured by a cubic meter scale detector. Our results are obtained from a detector we have deployed and operated at 25 meter standoff from a reactor core. This prototype can detect a prompt reactor shutdown within five hours, and monitor relative thermal power to three percent within seven days. Monitoring of short-term power changes in this way may be useful in the context of International Atomic Energy Agency's (IAEA) Reactor Safeguards Regime, or other cooperative monitoring regimes.

  12. What can we learn from high-frequency appliance-level energy metering? Results from a field experiment

    E-Print Network [OSTI]

    Chen, VL; Delmas, MA; Kaiser, WJ; Locke, SL

    2015-01-01

    Newborough, M. , 2003. Dynamic energy-consumption indicatorsbehaviour and design. Energy Build. 35 (8), Please cite thisfrequency appliance-level energy metering? Results from a ?

  13. Feasibility Study of Developing a Virtual Chilled Water Flow Meter at Air Handling Unit Level 

    E-Print Network [OSTI]

    Song, L.; Swamy, A.; Shim, G.

    2011-01-01

    In this paper, a virtual Air handling unit (AHU) level water flow meter is explored by using a control valve as a measurement device. The flow through the valve is indirectly calculated using differential pressure over both the valve and its...

  14. 1128 volume 27 number 12 december 2009 nature biotechnology square meter per day of algae containing

    E-Print Network [OSTI]

    Cai, Long

    1128 volume 27 number 12 december 2009 nature biotechnology square meter per day of algae, such as triglycerides from algae or cellulosic biomass from higher plants, as feedstocks for biofuel production. The algal program sought to develop high-oil-content algae that grow at very fast rates. In our report

  15. Proceedings of Power Systems 03: Distributed Generation and Advanced Metering 2002 Wichita State University

    E-Print Network [OSTI]

    Proceedings of Power Systems 03: Distributed Generation and Advanced Metering © 2002 Wichita State are critically dependent on the fuel quality and supply parameters for optimal power delivery and overall System Friction Losses (kW) PBearing Total System Bearing Losses (kW) PCon Electrical Conversion Losses

  16. Too expensive to meter: The influence of transaction costs in transportation and

    E-Print Network [OSTI]

    Odlyzko, Andrew M.

    , London Underground, London railways, collection costs, transaction costs, public transport 1 IntroductionToo expensive to meter: The influence of transaction costs in transportation and communication, and that in many cases such charging may lead to undesirable outcomes. Keywords: Transport, Telecommunications

  17. Capacity Analysis of a Wireless Backhaul for Metering in the Smart Grid

    E-Print Network [OSTI]

    Namboodiri, Vinod

    Capacity Analysis of a Wireless Backhaul for Metering in the Smart Grid Babak Karimi and Vinod- tribution level takes on greater importance with the introduc- tion of the Smart Grid approach. Title XIII. By improving the communication infrastructure, a vital ingredient for the Smart Grid, a more reliable approach

  18. Compressed Meter Reading for Delay-sensitive and Secure Load Report in Smart Grid

    E-Print Network [OSTI]

    Qiu, Robert Caiming

    1 Compressed Meter Reading for Delay-sensitive and Secure Load Report in Smart Grid Husheng Li, Rukun Mao, Lifeng Lai and Robert. C. Qiu Abstract-- It is a key task in smart grid to send the readings years, the technology of smart grid has attracted significant studies in both communities of power

  19. Direct Writing of Half-Meter Long CNT Based Fiber for Flexible Electronics

    E-Print Network [OSTI]

    Cui, Yi

    Direct Writing of Half-Meter Long CNT Based Fiber for Flexible Electronics Sihan Huang, Chunsong blocks for flexible electronic devices. We demon- strated that, by a simple hand-writing process, carbon: Ultralong fibers, aligned CNTs, controlled assembly, flexible electronics Flexibility of electronic devices

  20. Design rules for pumping and metering of highly viscous fluids in microfluidics

    E-Print Network [OSTI]

    Kenis, Paul J. A.

    Design rules for pumping and metering of highly viscous fluids in microfluidics Sarah L. Perry.1039/c0lc00035c The use of fluids that are significantly more viscous than water in microfluidics has a theoretical treatment for the flow of highly viscous fluids in deforming microfluidic channels, particularly

  1. The chromosome folding problem: How to organize a 2 meter genome into a 20 micron nucleus?

    E-Print Network [OSTI]

    Poonen, Bjorn

    ;#12;#12;#12;Why study chromosome organization? #12;Human genome project-- now that we know our ATCGs, what do they mean? #12;Goal: Develop a parts list of functional elements in the human genome httpsThe chromosome folding problem: How to organize a 2 meter genome into a 20 micron nucleus? #12

  2. On the Effectiveness of Energy Metering on Every Dept. of Computer Science

    E-Print Network [OSTI]

    Gnawali, Omprakash

    energy- efficient is one of the major research thrusts in the sensor network community. Energy metering of network-wide energy use. I. INTRODUCTION Energy is the most limiting resource in a sensor network for developers and users alike. Not surpris- ingly, energy-efficiency has been a major research thrust

  3. FEPMA: Fine-Grained Event-Driven Power Meter for Android Smartphones Based on Device Driver

    E-Print Network [OSTI]

    Pedram, Massoud

    FEPMA: Fine-Grained Event-Driven Power Meter for Android Smartphones Based on Device Driver Layer for providing highly accurate and nearly instantaneous estimates of power dis- sipation in an Android smartphone the Android operating system to provide information about power/performance state changes of various

  4. Hardware Implementation of the Primary Mirror Surface Heating System for the Gemini 8 meter Telescopes

    E-Print Network [OSTI]

    ­meter primary mirror. Keywords: seeing, resistive heating, thermal control, primary mirror 2 as a resistive heating element; the control of current flow across the mirror surface results in a controlled Block Diagram for Gemini Surface Heating System 2.4 Primary Voltage Control Subsystem: This system

  5. Hardware Implementation of the Primary Mirror Surface Heating System for the Gemini 8 meter Telescopes

    E-Print Network [OSTI]

    -meter primary mirror. Keywords: seeing, resistive heating, thermal control, primary mirror 2 as a resistive heating element; the control of current flow across the mirror surface results in a controlled Block Diagram for Gemini Surface Heating System 2.4 Primary Voltage Control Subsystem: This system

  6. AgSec: Secure and Efficient CDMA-based Aggregation for Smart Metering Systems

    E-Print Network [OSTI]

    Namboodiri, Vinod

    . For instance, it can be easily determined if a This work was supported in part by the Power Systems EngineeringAgSec: Secure and Efficient CDMA-based Aggregation for Smart Metering Systems Navid Alamatsaz and energy. Hence, utilizing data aggregation algorithms, the limited bandwidth can be efficiently utilized

  7. Optimal Integration of Renewable Energy Resources in Data Centers with Behind-the-Meter Renewable Generator

    E-Print Network [OSTI]

    Mohsenian-Rad, Hamed

    1 Optimal Integration of Renewable Energy Resources in Data Centers with Behind-the-Meter Renewable-- Renewable energy resources, such as wind and solar power, are rapidly becoming generation technologies-temporal variations, the integration of renewable energy resources is usually very challenging. Some of the previously

  8. Too expensive to meter: The influence of transaction costs in transportation and

    E-Print Network [OSTI]

    Odlyzko, Andrew M.

    Too expensive to meter: The influence of transaction costs in transportation and communication Pillsbury Drive SE, Minneapolis, MN 55455, USA, and Digital Technology Center, University of Minnesota, 499 Walter Library, 117 Pleasant St. SE, Minneapolis, MN 55455, USA Technology appears to be making fine

  9. Transits of planets with small intervals in circumbinary systems

    SciTech Connect (OSTI)

    Liu, Hui-Gen; Wang, Ying; Zhang, Hui; Zhou, Ji-Lin

    2014-08-01

    Transit times around single stars can be described well by a linear ephemeris. However, transit times in circumbinary systems are influenced both by the gravitational perturbations and the orbital phase variations of the central binary star. Adopting a coplanar analog of Kepler-16 as an example, we find that circumbinary planets can transit the same star more than once during a single planetary orbit, a phenomenon we call 'tight transits.' In certain geometric architecture, the projected orbital velocity of the planet and the secondary star can approach zero and change sign, resulting in very long transits and/or 2-3 transits during a single binary orbit. Whether tight transits are possible for a particular system depends primarily on the binary mass ratio and the orbital architecture of both the binary and the planet. We derive a time-dependent criterion to judge when tight transits are possible for any circumbinary system. These results are verified with full dynamical integrations that also reveal other tight transit characteristics, i.e., the transit durations and the intervals between tight transits. For the seven currently known circumbinary systems, we estimate these critical parameters both analytically and numerically. Due to the mutual inclination between the planet and the binary, tight transits can only occur across the less massive star B in Kepler-16, -34, -35, and -47 (for both planets). The long-term average frequency of tight transits (compared to typical transits) for Kepler-16, -34, and -35 are estimated to be several percent. Using full numerical integrations, the next tight transit for each system is predicted and the soonest example appears to be Kepler-47b and -47c, which are likely to have tight transits before 2025. These unique and valuable events often deserve special observational scrutiny.

  10. Communication Needs and Integration Options

    E-Print Network [OSTI]

    consumer participation in the smart grid. It describes the motivation for AMI, surveys the current stateCommunication Needs and Integration Options for AMI in the Smart Grid Future Grid Initiative White Paper Power Systems Engineering Research Center Empowering Minds to Engineer the Future Electric Energy

  11. Remote metering 

    E-Print Network [OSTI]

    Ingram, Henry Lee

    1929-01-01

    of a purely electrical nature and of much mora value to the electrical fraternity than to the 13 oil industry and that the company was interested vitally only in those patents relating to tne produotion, refining and. marweting of petrolems and its... to use and at the same time Bee+- leave open an avenue of exploitation as a premium for the development of the idea and its use to the benefit of the oocpany. ihe company oontinued the prosecution of the application on the patent Qffioe, and while...

  12. Net Metering

    Broader source: Energy.gov [DOE]

    Net excess generation (NEG) is treated as a kilowatt-hour (kWh) credit or other compensation on the customer's following bill.* When an annual period ends, a utility will purchase unused credits...

  13. Fission meter

    DOE Patents [OSTI]

    Rowland, Mark S. (Alamo, CA); Snyderman, Neal J. (Berkeley, CA)

    2012-04-10

    A neutron detector system for discriminating fissile material from non-fissile material wherein a digital data acquisition unit collects data at high rate, and in real-time processes large volumes of data directly into information that a first responder can use to discriminate materials. The system comprises counting neutrons from the unknown source and detecting excess grouped neutrons to identify fission in the unknown source.

  14. IEEE TRANSACTIONS ON COMMUNICATIONS, VOL. 51, NO. 12, DECEMBER 2003 2081 On Optimizing the Backoff Interval

    E-Print Network [OSTI]

    Haas, Zygmunt J.

    scheme out-performs other backoff schemes, such as binary exponential backoff (BEB) and multiplicative Terms--Backoff algorithm, backoff interval, binary ex- ponential backoff (BEB), multiplicative increase

  15. Addressing the needs of mobile users

    E-Print Network [OSTI]

    Sohn, Timothy Youngjin

    2008-01-01

    of mobile information needs . . Pie chart of when needs wereaddressed . . Pie chart of how needs were addressed . . .Pie chart of why needs were addressed later Pie chart of why

  16. Subsea completion technology needs advances

    SciTech Connect (OSTI)

    Ledbetter, R.

    1995-09-18

    Subsea technology needs further advances to reduce operational costs before operators will expand the use of subsea well completions in the Gulf of Mexico. They will continue to choose surface completion-oriented systems as long as these are more economical operationally than subsea system. Designs of subsea equipment such as trees, connectors, control pods, umbilicals, and flow lines, must bring about reductions in the cost of both installation and workover compatibility. Remote operated vehicle (ROV) manipulation is one avenue that should be exploited. The bottom line is that significant cooperation between equipment manufacturers and ROV companies is needed to develop advanced ROV technology, and operators should be involved to help guide operational strategies.

  17. Uncertainties in the Value of Bill Savings from Behind-the-Meter, Residential Photovoltaic Systems: The Roles of Electricity Market Conditions, Retail Rate Design, and Net Metering

    E-Print Network [OSTI]

    Darghouth, Naim Richard

    2013-01-01

    electricity markets: Need and design. Utilities Policy 16,market design .Alternative wholesale market design and retail rate

  18. Design of a Net-Metering and PV Exhibit for the 2005 Solar Decathlon

    SciTech Connect (OSTI)

    Wassmer, M.; Warner, C.

    2005-01-01

    In the 2005 Solar Decathlon competition, 19 collegiate teams will design, build, and operate grid-independent homes powered by photovoltaic (PV) arrays on the National Mall. The prominence of grid-interconnected systems in the marketplace has provided the impetus for the development of a net-metering exhibit to be installed and operated during the competition. The exhibit will inform the visiting public about PV basics and appropriate alternatives to grid-independent systems. It will consist of four interactive components. One will be designed to educate people about the principles of net metering using a small PV array, a grid-interactive inverter, and a variable load. Additional components of the exhibit will demonstrate the effects of orientation, cloud cover, and nighttime on performance. The nighttime component will discuss appropriate storage options for different applications.

  19. Deployment of High Resolution Real-Time Distribution Level Metering on Maui: Preprint

    SciTech Connect (OSTI)

    Bank, J.

    2013-01-01

    In order to support the ongoing Maui Smart Grid demonstration project advanced metering has been deployed at the distribution transformer level in Maui Electric Company's Kihei Circuit on the Island of Maui. This equipment has been custom designed to provide accurately time-stamped Phasor and Power Quality data in real time. Additionally, irradiance sensors have been deployed at a few selected locations in proximity to photovoltaic (PV) installations. The received data is being used for validation of existing system models and for impact studies of future system hardware. Descriptions of the hardware and its installation, and some preliminary metering results are presented. Real-time circuit visualization applications for the data are also under development.

  20. The SNL100-01 blade : carbon design studies for the Sandia 100-meter blade.

    SciTech Connect (OSTI)

    Griffith, Daniel Todd

    2013-02-01

    A series of design studies to investigate the effect of carbon on blade weight and performance for large blades was performed using the Sandia 100-meter All-glass Baseline Blade design as a starting point. This document provides a description of the final carbon blade design, which is termed as SNL100-01. This report includes a summary of the design modifications applied to the baseline all-glass 100-meter design and a description of the NuMAD model files that are made publicly available. This document is intended primarily to be a companion document to the distribution of the NuMAD blade model files for SNL100-01.

  1. The SNL100-03 Blade: Design Studies with Flatback Airfoils for the Sandia 100-meter Blade.

    SciTech Connect (OSTI)

    Griffith, Daniel; Richards, Phillip William

    2014-09-01

    A series of design studies were performed to inv estigate the effects of flatback airfoils on blade performance and weight for large blades using the Sandi a 100-meter blade designs as a starting point. As part of the study, the effects of varying the blade slenderness on blade structural performance was investigated. The advantages and disadvantages of blad e slenderness with respect to tip deflection, flap- wise & edge-wise fatigue resistance, panel buckling capacity, flutter speed, manufacturing labor content, blade total weight, and aerodynamic design load magn itude are quantified. Following these design studies, a final blade design (SNL100-03) was prod uced, which was based on a highly slender design using flatback airfoils. The SNL100-03 design with flatback airfoils has weight of 49 tons, which is about 16% decrease from its SNL100-02 predecessor that used conventional sharp trailing edge airfoils. Although not systematically optimized, the SNL100 -03 design study provides an assessment of and insight into the benefits of flatback airfoils for la rge blades as well as insights into the limits or negative consequences of high blade slenderness resulting from a highly slender SNL100-03 planform as was chosen in the final design definition. This docum ent also provides a description of the final SNL100-03 design definition and is intended to be a companion document to the distribution of the NuMAD blade model files for SNL100-03, which are made publicly available. A summary of the major findings of the Sandia 100-meter blade development program, from the initial SNL100-00 baseline blade through the fourth SNL100-03 blade study, is provided. This summary includes the major findings and outcomes of blade d esign studies, pathways to mitigate the identified large blade design drivers, and tool development that were produced over the course of this five-year research program. A summary of large blade tec hnology needs and research opportunities is also presented.

  2. Borehole Gravity Meter Surveys at the Waste Treatment Plant, Hanford, Washington.

    SciTech Connect (OSTI)

    MacQueen, Jeffrey D.; Mann, Ethan

    2007-04-06

    Microg-LaCoste (MGL) was contracted by Pacfic Northwest National Laboratories (PNNL) to record borehole gravity density data in 3 wells at the HanfordWaste Treatment Plant (WTP) site. The survey was designed to provide highly accurate density information for use in seismic modeling. The borehole gravity meter (BHGM) tool has a very large depth of investigation (hundreds of feet) compared to other density tools so it is not influenced by casing or near welbore effects, such as washouts.

  3. Metering Best Practices: A Guide to Achieving Utility Resource Efficiency, Release 3.0

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankADVANCED MANUFACTURING OFFICESpecial ReportProposal toDepartment of Energy Metering Best Practices:

  4. Effects of perceptual load on startle reflex modification at a long lead interval

    E-Print Network [OSTI]

    Effects of perceptual load on startle reflex modification at a long lead interval GARY L. THORNE Abstract Inhibition of the startle eyeblink response at long lead intervals has been hypothesized to occur the lead and startle stimuli are in different modalities under conditions of high perceptual load

  5. Interval Methods for Sensitivity-Based Model-Predictive Control of

    E-Print Network [OSTI]

    Kearfott, R. Baker

    Interval Methods for Sensitivity-Based Model-Predictive Control of Solid Oxide Fuel Cell Systems and experiment for the thermal subprocess of a high-temperature solid oxide fuel cell system. Keywords: Interval analysis, model-predictive control, sensitivity analysis, tracking control, solid oxide fuel cells AMS

  6. Regression Models with Interval Censoring Jian Huang and Jon A. Wellner 1

    E-Print Network [OSTI]

    Wellner, Jon A.

    Regression Models with Interval Censoring Jian Huang and Jon A. Wellner 1 University of Washington October 6, 1993 Abstract In this paper we discuss estimation in semiparametric regression models with interval censoring, with emphasis on estimation of the regression parameter . The first section surveys

  7. Approximate and Fiducial Confidence Intervals for the Difference Between Two Binomial Proportions

    E-Print Network [OSTI]

    Krishnamoorthy, Kalimuthu

    Approximate and Fiducial Confidence Intervals for the Difference Between Two Binomial Proportions K of estimating the difference between two binomial proportions is considered. Closed-form approximate confidence intervals (CIs), and a fiducial CI for the difference between proportions are proposed. The approximate CIs

  8. LYAPUNOV AND SACKER-SELL SPECTRAL INTERVALS LUCA DIECI AND ERIK S. VAN VLECK

    E-Print Network [OSTI]

    Van Vleck, Erik S.

    LYAPUNOV AND SACKER-SELL SPECTRAL INTERVALS LUCA DIECI AND ERIK S. VAN VLECK Abstract­ the Lyapunov spectral intervals. Since any bounded and continuous coeficient matrix function can be smoothly/or continuous Lyapunov spectrum. Key words. Exponential dichotomy, Sacker-Sell spectrum, Lyapunov exponents

  9. Scaling and memory of intraday volatility return intervals in stock markets Fengzhong Wang,1

    E-Print Network [OSTI]

    Stanley, H. Eugene

    Scaling and memory of intraday volatility return intervals in stock markets Fengzhong Wang,1 Kazuko interval between price volatilities that are above a certain threshold q for 31 intraday data sets Yamasaki,1,2 Shlomo Havlin,1,3 and H. Eugene Stanley1 1 Center for Polymer Studies and Department

  10. 286 IEEE TRANSACTIONS ON COMPUTERS, VOL. 44, NO. 2. FEBRUARY 1995 Interval Availability Analysis Using Denumerable

    E-Print Network [OSTI]

    Sericola, Bruno

    286 IEEE TRANSACTIONS ON COMPUTERS, VOL. 44, NO. 2. FEBRUARY 1995 Interval Availability Analysis Gerard0 Rubino and Bruno Sericola Abstiact-Interval availability is a dependability measure de- fined availability level is high enough. The system is assumed to be modeled as a Markov process with countable state

  11. The Economic Value of PV and Net Metering to Residential Customers in California

    SciTech Connect (OSTI)

    Darghouth, Naim; Barbose, Galen; Wiser, Ryan

    2010-05-17

    In this paper, we analyze the bill savings from PV for residential customers of the California's two largest electric utilities, under existing net metering tariffs as well as under several alternative compensation mechanisms. We find that economic value of PV to the customer is dependent on the structure of the underlying retail electricity rate and can vary quite significantly from one customer to another. In addition, we find that the value of the bill savings from PV generally declines with PV penetration level, as increased PV generation tends to offset lower-priced usage. Customers in our sample from both utilities are significantly better off with net metering than with a feed-in tariff where all PV generation is compensated at long-run avoided generation supply costs. Other compensation schemeswhich allow customers to displace their consumption with PV generation within each hour or each month, and are also based on the avoided costs, yield similar value to the customer as net metering.

  12. The Digital Skin of Cities: Urban Theory and Research in the Age of the Sensored and Metered City, Ubiquitous Computing, and Big Data

    E-Print Network [OSTI]

    Rabari, Chirag

    2013-01-01

    Metered City, Ubiquitous Computing, and Big Data A thesisMetered City, Ubiquitous Computing, and Big Data by ChiragIn concert with ubiquitous computing, and the increasing use

  13. Uncertainties in the Value of Bill Savings from Behind-the-Meter, Residential Photovoltaic Systems: The Roles of Electricity Market Conditions, Retail Rate Design, and Net Metering

    E-Print Network [OSTI]

    Darghouth, Naim Richard

    2013-01-01

    payments in imperfect electricity markets: Need and design.Economics of Renewable Electricity Market Integration. Angeneration in the Irish electricity market, in: 30th IAEE/

  14. Needs Analysis for Dimethyl Mercury

    SciTech Connect (OSTI)

    Schmoldt, Michael J.

    2013-02-13

    For this needs analysis, a total of 131 DMHg analytical results were collected and reviewed from the Hanford Tank Farms from 2004 to 2007. Sampling data from the Site Wide Industrial Hygiene Database (SWIHO), the Tank waste inventory System (TWINs), and prior sampling campaigns by CH2M Hill Hanford that were not available in the SWIHD database, were aggregated for analysis. Technical literature used by the Savannah River Site (SRS). Bechtel RPP·WTP, and CH2M Hill Hanford from 2003-2007, were also reviewed to identify potential DMHg exposure concerns applicable to the tank farms. After analyzing the adequacy of lhe data, information gaps were identified and recommendations for corrective actions items were developed.

  15. The Digital Skin of Cities: Urban Theory and Research in the Age of the Sensored and Metered City, Ubiquitous Computing, and Big Data

    E-Print Network [OSTI]

    Rabari, Chirag

    2013-01-01

    phone GPS trails, and smart energy meters (Eaton et al,People? The advent of smart energy grids, water systems,

  16. A Technique to Utilize Smart Meter Load Information for Adapting Overcurrent Protection for Radial Distribution Systems with Distributed Generations 

    E-Print Network [OSTI]

    Ituzaro, Fred Agyekum

    2012-07-16

    Smart radial distribution grids will include advanced metering infrastructure (AMI) and significant distributed generators (DGs) connected close to loads. DGs in these radial distribution systems (RDS) introduce bidirectional power flows (BPFs...

  17. Report of Energy Efficiency Study and Metering/Utilities Profile for Electric Deregulation at Tarleton State University (TSU), Stephenville, Texas 

    E-Print Network [OSTI]

    Zhu, Y.; Bryant, J.; Turner, W. D.; Claridge, D. E.

    1999-01-01

    The director of Energy Management & Controls and staff at Tarleton State University (TSU) do a very good job of maintaining TSU and keeping expenses down. They have metering installed in many buildings and track the campus energy use closely. During...

  18. The Impact of Rate Design and Net Metering on the Bill Savings from Distributed PV for Residential Customers in California

    SciTech Connect (OSTI)

    Darghouth, Naim; Barbose, Galen; Wiser, Ryan

    2010-03-30

    Net metering has become a widespread policy in the U.S. for supporting distributed photovoltaics (PV) adoption. Though specific design details vary, net metering allows customers with PV to reduce their electric bills by offsetting their consumption with PV generation, independent of the timing of the generation relative to consumption - in effect, compensating the PV generation at retail electricity rates (Rose et al. 2009). While net metering has played an important role in jump-starting the residential PV market in the U.S., challenges to net metering policies have emerged in a number of states and contexts, and alternative compensation methods are under consideration. Moreover, one inherent feature of net metering is that the value of the utility bill savings it provides to customers with PV depends heavily on the structure of the underlying retail electricity rate, as well as on the characteristics of the customer and PV system. Consequently, the value of net metering - and the impact of moving to alternative compensation mechanisms - can vary substantially from one customer to the next. For these reasons, it is important for policymakers and others that seek to support the development of distributed PV to understand both how the bill savings varies under net metering, and how the bill savings under net metering compares to other possible compensation mechanisms. To advance this understanding, we analyze the bill savings from PV for residential customers of California's two largest electric utilities, Pacific Gas and Electric (PG&E) and Southern California Edison (SCE). The analysis is based on hourly load data from a sample of 215 residential customers located in the service territories of the two utilities, matched with simulated hourly PV production for the same time period based on data from the nearest of 73 weather stations in the state.

  19. A study of the Antilles Current using moored current meter arrays 

    E-Print Network [OSTI]

    Maloney, William Everett

    1967-01-01

    characteristics of the Savcnius rotor have been reported previously by Gaul (1962). The output from the current meter is a ro11 of 16 mm photographic film containing current direction and speed data, data on case inclination, and timing pulses. An example... the summer npeia ions, wind directions and speeds were typical for this subtropical latitude being gener;illy out of the east at Table 2. Mooring nositioning data. oorlpg; I I IFix No. !:Date, " Time I !I, " L'ST :I ~L*'- 0. ! I ILongitude Il...

  20. OVERCOMING THE METER BARRIER AND THE FORMATION OF SYSTEMS WITH TIGHTLY PACKED INNER PLANETS (STIPs)

    SciTech Connect (OSTI)

    Boley, A. C.; Morris, M. A.; Ford, E. B.

    2014-09-10

    We present a solution to the long outstanding meter barrier problem in planet formation theory. As solids spiral inward due to aerodynamic drag, they will enter disk regions that are characterized by high temperatures, densities, and pressures. High partial pressures of rock vapor can suppress solid evaporation, and promote collisions between partially molten solids, allowing rapid growth. This process should be ubiquitous in planet-forming disks, which may be evidenced by the abundant class of Systems with Tightly packed Inner Planets discovered by the NASA Kepler Mission.

  1. Google's looking smarter about advanced metering than long-laboring utilities

    SciTech Connect (OSTI)

    2009-07-15

    In late May, Google announced a partnership with eight utilities in six states in the U.S. plus Canada and India to enable roughly 10 million customers to 'access detailed information on their home energy use.' What is different about the new product is that consumers can view simple graphical displays of their power usage more or less in real time from anywhere there is access to the Internet. That may ultimately turn PowerMeter into a powerful tool to manage electricity consumption on truly large scale and at very low cost.

  2. Tips: Smart Meters and a Smarter Power Grid | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative FuelsofProgram: Report1538-1950 Timeline of Events:Smart Meters and a Smarter Power

  3. Microsoft PowerPoint - 03.2010_Metering Billing MDM America.pptx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration wouldMass map shines light on darkMicroorganisms to Speed Production ofMETERING BILLING/MDM

  4. Statistical Models for Solar Flare Interval Distribution in Individual Active Regions

    E-Print Network [OSTI]

    Yuki Kubo

    2008-02-01

    This article discusses statistical models for solar flare interval distribution in individual active regions. We analyzed solar flare data in 55 active regions that are listed in the GOES soft X-ray flare catalog. We discuss some problems with a conventional procedure to derive probability density functions from any data set and propose a new procedure, which uses the maximum likelihood method and Akaike Information Criterion (AIC) to objectively compare some competing probability density functions. We found that lognormal and inverse Gaussian models are more likely models than the exponential model for solar flare interval distribution in individual active regions. The results suggest that solar flares do not occur randomly in time; rather, solar flare intervals appear to be regulated by solar flare mechanisms. We briefly mention a probabilistic solar flare forecasting method as an application of a solar flare interval distribution analysis.

  5. Case Studies in Using Interval Data Energy Models for Savings Verification: Lessons from the Grocery Sector 

    E-Print Network [OSTI]

    Effinger, J.

    2011-01-01

    The use of whole building utility interval data for verifying energy savings from energy efficiency projects has become an attractive option as this data is increasingly available. Formal protocols, such as IPMVP Option C and ASHRAE Guideline 14...

  6. Computing Best Possible Pseudo-Solutions to Interval Linear Systems of Equations

    E-Print Network [OSTI]

    Kearfott, R. Baker

    . Panyukov South Ural State University, Chelyabinsk, Russia a_panyukov@mail.ru Valentin A. Golodov South Ural State University, Chelyabinsk, Russia avaksa@gmail.com Abstract In the paper, we consider interval

  7. Monitoring molecular interactions using photon arrival-time interval distribution analysis

    DOE Patents [OSTI]

    Laurence, Ted A. (Livermore, CA); Weiss, Shimon (Los Angels, CA)

    2009-10-06

    A method for analyzing/monitoring the properties of species that are labeled with fluorophores. A detector is used to detect photons emitted from species that are labeled with one or more fluorophores and located in a confocal detection volume. The arrival time of each of the photons is determined. The interval of time between various photon pairs is then determined to provide photon pair intervals. The number of photons that have arrival times within the photon pair intervals is also determined. The photon pair intervals are then used in combination with the corresponding counts of intervening photons to analyze properties and interactions of the molecules including brightness, concentration, coincidence and transit time. The method can be used for analyzing single photon streams and multiple photon streams.

  8. A Recipe for Construction of the Critical Vertices for Left-Sector Stability of Interval

    E-Print Network [OSTI]

    A Recipe for Construction of the Critical Vertices for Left-Sector Stability of Interval polynomials. This paper provides a recipe for construction of these critical vertices. Illustrative examples

  9. Interval Computations as an Important Part of Granular Computing: An Introduction

    E-Print Network [OSTI]

    Kreinovich, Vladik

    interval techniques, and we list a few typical applications of these techniques. 2 Why Computations the best way to change this flow (e.g., by building dams or levees) is a problem of engineering

  10. Robust stabilizer synthesis for interval plants using H-Infinity methods 

    E-Print Network [OSTI]

    Bhattacharya, Saikat

    1993-01-01

    OF SCIENCE August 1993 Major Subject: Electrical Engineering ROBUST STABILIZER SYNTHESIS FOR INTERVAL PLANTS USING H-INFINITY METHODS A Thesis by SAIKAT BHATTACHARYA Approved as to style and content by: S. P. Bhattacharyya (Chair of Committee) J. W.... (Hons. ), Indian Institute of Technology, Khsragpur, India Chair of Advisory Committee: Dr. S. P. Bhattacharyya The aim of this research has been to develop a synthesis method for the robust stabilization of interval plants. First, the biggest...

  11. PHY and MAC Layer Design of Hybrid Spread Spectrum Based Smart Meter Network

    SciTech Connect (OSTI)

    Kuruganti, Phani Teja

    2012-01-01

    The smart grid is a combined process of revitalizing the traditional power grid applications and introducing new applications to improve the efficiency of power generation, transmission and distribution. This can be achieved by leveraging advanced communication and networking technologies. Therefore the selection of the appropriate communication technology for different smart grid applications has been debated a lot in the recent past. After comparing different possible technologies, a recent research study has arrived at a conclusion that the 3G cellular technology is the right choice for distribution side smart grid applications like smart metering, advanced distribution automation and demand response management system. In this paper, we argue that the current 3G/4G cellular technologies are not an appropriate choice for smart grid distribution applications and propose a Hybrid Spread Spectrum (HSS) based Advanced Metering Infrastructure (AMI) as one of the alternatives to 3G/4G technologies. We present a preliminary PHY and MAC layer design of a HSS based AMI network and evaluate their performance using matlab and NS2 simulations. Also, we propose a time hierarchical scheme that can significantly reduce the volume of random access traffic generated during blackouts and the delay in power outage reporting.

  12. A Near-Infrared Spectroscopic Survey at the SDSS 2.5-meter Telescope?

    E-Print Network [OSTI]

    Skrutskie, Michael F

    2015-01-01

    We are posting this 10-year-old white paper to support an upcoming survey description paper for the SDSS-III Apache Point Galactic Evolution Experiment (APOGEE) led by PI Dr. Steven Majewski. The white paper presented here was a contribution to a 2005 "futures" planning process for the Astrophysical Research Consortium led by Dr. Donald York that examined both prospects for extending the work of SDSS and SDSS-II as well as enhancing the capabilities of the Apache Point 3.5-meter telescope and the overall scientific reach of the Consortium. This particular white paper describes the potential for using the Sloan 2.5-meter telescope and its fiber optic infrastructure to conduct a galactic plane chemical abundance survey in the low-extinction 1.6um H-band. The survey would target >1000 red giant stars per night selected from the Two Micron All Sky Survey using a >200 fiber near-infrared spectrograph operating at spectral resolution of R~24,000 with a magnitude limit of H~12 - very close to the final APOGEE implem...

  13. Designing and Operating Through Compromise: Architectural Analysis of CKMS for the Advanced Metering Infrastructure

    SciTech Connect (OSTI)

    Duren, Mike; Aldridge, Hal; Abercrombie, Robert K; Sheldon, Frederick T

    2013-01-01

    Compromises attributable to the Advanced Persistent Threat (APT) highlight the necessity for constant vigilance. The APT provides a new perspective on security metrics (e.g., statistics based cyber security) and quantitative risk assessments. We consider design principals and models/tools that provide high assurance for energy delivery systems (EDS) operations regardless of the state of compromise. Cryptographic keys must be securely exchanged, then held and protected on either end of a communications link. This is challenging for a utility with numerous substations that must secure the intelligent electronic devices (IEDs) that may comprise complex control system of systems. For example, distribution and management of keys among the millions of intelligent meters within the Advanced Metering Infrastructure (AMI) is being implemented as part of the National Smart Grid initiative. Without a means for a secure cryptographic key management system (CKMS) no cryptographic solution can be widely deployed to protect the EDS infrastructure from cyber-attack. We consider 1) how security modeling is applied to key management and cyber security concerns on a continuous basis from design through operation, 2) how trusted models and key management architectures greatly impact failure scenarios, and 3) how hardware-enabled trust is a critical element to detecting, surviving, and recovering from attack.

  14. Simulation of Coating -Visco-Elastic liquid in the Mico-Nip of Metering Size Press

    E-Print Network [OSTI]

    El-Sadi, Haifa

    2008-01-01

    For a set of operating conditions and coating color formulations, undesirable phenomena like color spitting and coating ribs may be triggered in the Micro-nip during the coating process. Therefore, our interest in this work focus on another parameter affect on the undesirable phenomena as the vortices in the Micro-nip. The problem deals with the flow through the Micro-nip of metering size press. The flow enters and exits at a tangential velocity of 20 m/s between two rollers with diameter 80 cm and 60 -m apart. In the upper and bottom part of the domain the angular velocity is 314 rad /s. It has one sub-domain. Previous studies focus on the Micro-nip without considering the inertia and the viscoelasticity of the material. Roll coating is a technique commonly used in the coating industry to meter a thin fluid film on a moving substrate. During the film formation, the fluid is subjected to very high shear and extensional rates over a very short period of time. The fluid domain changes as a function of the hydro...

  15. Greenhouse Gas Inventory Uncertainties Need Characterization

    E-Print Network [OSTI]

    Post, Wilfred M.

    Greenhouse Gas Inventory Uncertainties Need Characterization Contact: Gregg Marland, 865 of greenhouse gases (GHGs) emitted to and removed from the atmosphere are essential for understanding global.S. Department of Energy Greenhouse Gas Inventory Uncertainties Need Characterization Abstract: The assessment

  16. Industry program needed for nuclear accident management

    SciTech Connect (OSTI)

    Klopp, G.T

    1989-05-01

    This paper addresses the need for a management program for nuclear power accidents. According to the author, the tools and technology for severe accident management exist. The need for a clear, realistic definition of nuclear accident program requirements is discussed.

  17. Metering Best Practices, A Guide to Achieving Utility Resource Efficiency, Release 2.0

    SciTech Connect (OSTI)

    Sullivan, Greg; Hunt, W. D.; Pugh, Ray; Sandusky, William F.; Koehler, Theresa M.; Boyd, Brian K.

    2011-08-31

    This release is an update and expansion of the information provided in Release 1.0 of the Metering Best Practice Guide that was issued in October 2007. This release, as was the previous release, was developed under the direction of the U.S. Department of Energy's Federal Energy Management Program (FEMP). The mission of FEMP is to facilitate the Federal Government's implementation of sound cost-effective energy management and investment practices to enhance the nation's energy security and environmental stewardship. Each of these activities is directly related to achieving requirements set forth in the Energy Policy Acts of 1992 and 2005, the Energy Independence and Security Act (EISA) of 2007, and the goals that have been established in Executive Orders 13423 and 13514 - and also those practices that are inherent in sound management of Federal financial and personnel resources.

  18. STARS Training Needs Assessment Learner Instructions 07/2009 1 STARS Training Needs Assessment

    E-Print Network [OSTI]

    Ford, James

    STARS Training Needs Assessment Learner Instructions 07/2009 1 STARS Training Needs Assessment. · Click the STARS (Training) tab. · Click My Training Needs in the left menu. · Click the secure link to continue to My Training Needs. On the Training Needs Assessment page, click the box to the left of every

  19. Time interval and lattice vibration in Raman effect, photoelectric effect and plane mirror reflection

    E-Print Network [OSTI]

    M. Kumar; S. Sahoo

    2012-07-02

    Time interval between the incident and scattered photon in Raman effect and absorption of photon and emission of electron in photoelectric effect has not been determined till now. This is because there is no such high level instrument discovered till now to detect time interval to such a small level. But this can be calculated theoretically by applying a basic principle of physics like impulse is equal to the change in momentum. Considering the collision between electron and photon as perfect inelastic collision in photoelectric effect, elastic and inelastic collision in Raman effect and elastic collision in plane mirror reflection and the interaction between electron and photon as strong gravitational interaction we calculate the required time interval. During these phenomena there is lattice vibration which can be quantized as phonon particles.

  20. Distribution of Primes and of Interval Prime Pairs Based on $?$ Function

    E-Print Network [OSTI]

    Yifang Fan; Zhiyu Li

    2010-04-19

    $\\Theta$ function is defined based upon Kronecher symbol. In light of the principle of inclusion-exclusion, $\\Theta$ function of sine function is used to denote the distribution of composites and primes. The structure of Goldbach Conjecture has been analyzed, and $\\Xi$ function is brought forward by the linear diophantine equation; by relating to $\\Theta$ function, the interval distribution of composite pairs and prime pairs (i.e. the Goldbach Conjecture) is thus obtained. In the end, Abel's Theorem (Multiplication of Series) is used to discuss the lower limit of the distribution of the interval prime pairs.

  1. Evaluation of a portable x-ray fluorescence survey meter for the quantitative determination of trace metals in welding fumes 

    E-Print Network [OSTI]

    Fehrenbacher, Mary Catherine

    1984-01-01

    EVALUATION OF A PORTABLE X-RAY FLUORE~ SURVEY METER FOR TIIE QUANTITATIVE DEPERMINATI(gq OF TRACE METALS IN WELDING FIJvtES A THESIS by MARY CATHERINE FEHRENBACHER Submitted to the Graduate College of Texas A%M University in partial... fulfillment of the requirement for the degree of MASTER OF SCIENCE May, 1984 MAJOR SUBJECI': INDUSTRIAL HYGIENE EVALUATION OF A PORTABLE X-RAY FLUORES~ SURVEY METER FOR THE QUANTITATIVE DETERMINATIGN OF TRACE METALS IN WELDING FIJvtES A THESIS by h...

  2. Interval Methods in Remote Sensing: Reliable SubDivision of Geological Areas

    E-Print Network [OSTI]

    Ward, Karen

    Interval Methods in Remote Sensing: Reliable Sub­Division of Geological Areas David D. Coblentz, G. The subdivision of a geological zone into segments is often a controversial issue, with different evidence of the geological subdivision is the fact that the existing subdivision is often based on the chemical and physical

  3. Estimation of shear-wave interval attenuation from mode-converted data Bharath Shekar1

    E-Print Network [OSTI]

    Tsvankin, Ilya

    Tsvankin1 ABSTRACT Interval attenuation measurements provide valuable infor- mation for reservoir characterization and lithology discrimi- nation. We extend the attenuation layer-stripping method of Behura of the material (Prasad and Nur, 2003), the pre- sence of aligned fluid-filled fractures (Chapman, 2003; Batzle et

  4. Neurocomputing 70 (2007) 17171722 Serial interval statistics of spontaneous activity in cortical neurons

    E-Print Network [OSTI]

    Menzel, Randolf - Institut für Biologie

    2007-01-01

    Stationary spiking of single neurons is often modelled by a renewal point process. Here, we tested are frequently used as models for neuronal spiking. Renewal processes are a simple and well-studied class (i.i.d.) according to a fixed interval distribution [10]. Renewal models may be defined in abstract

  5. Estimating Prediction Intervals for Arti cial Neural Lyle H. Ungar Richard D. De Veaux Evelyn Rosengarten

    E-Print Network [OSTI]

    Ungar, Lyle H.

    prediction lim- its for ANN's: a frequentist approach, based on stan- dard non-linear regression theory for estimating the prediction uncertainties of non- linear regressionseee.g Seberand Wild, 1989, based on localEstimating Prediction Intervals for Arti cial Neural Networks Lyle H. Ungar Richard D. De Veaux

  6. Estimating Prediction Intervals for Artificial Neural Lyle H. Ungar Richard D. De Veaux Evelyn Rosengarten

    E-Print Network [OSTI]

    Ungar, Lyle H.

    to obtaining prediction lim­ its for ANN's: a frequentist approach, based on stan­ dard non­linear regression of the prediction intervals, their computational costs and practical implementa­ tion issues of the two approaches of as doing nonlinear regression. Standard methods ex­ ist for estimating the prediction uncertainties of non

  7. Neurocomputing 70 (2007) 26922700 Inter-spike-intervals analysis of AER Poisson-like generator hardware

    E-Print Network [OSTI]

    Barranco, Bernabe Linares

    2007-01-01

    Neurocomputing 70 (2007) 2692­2700 Inter-spike-intervals analysis of AER Poisson-like generator Sevilla, Spain Available online 10 May 2007 Abstract Address­Event­Representation (AER) is a communication). In developing AER-based systems it is very convenient to have available some means of generating AER streams

  8. Original Research Article First Birth Interval, An Indicator of Energetic Status, Is a Predictor of Lifetime

    E-Print Network [OSTI]

    Lummaa, Virpi

    by a shorter waiting time to the first birth (first birth interval, FBI), are able to afford higher costs was divided into tertiles based on the length of FBI. Results: Women with the shortest FBI had a higher number.06). Women who had ever given birth to twins had shorter FBI than women of singletons (20.1 and 26.1 months

  9. Uncertainty in Risk Analysis: Towards a General SecondOrder Approach Combining Interval,

    E-Print Network [OSTI]

    Kreinovich, Vladik

    Uncertainty in Risk Analysis: Towards a General Second­Order Approach Combining Interval important in risk analysis. A natural way to describe this uncer­ tainty is to describe a set of possible methods of handling such partial information in risk analysis. Several such techniques have been presented

  10. Proper Oil Sampling Intervals and Sample Collection Techniques Gasoline/Diesel/Natural Gas Engines

    E-Print Network [OSTI]

    Proper Oil Sampling Intervals and Sample Collection Techniques Gasoline/Diesel/Natural Gas Engines: · Oil samples can be collected during oil changes. Follow manufacturers recommendations on frequency (hours, mileage, etc) of oil changes. · Capture a sample from the draining oil while the oil is still hot

  11. Weak -nets and interval chains Noga Alon, Haim Kaplan, Gabriel Nivasch1

    E-Print Network [OSTI]

    Shamir, Ron

    Weak -nets and interval chains Noga Alon, Haim Kaplan, Gabriel Nivasch1 , Micha Sharir, Shakhar@post.tau.ac.il, gnivasch@post.tau.ac.il, michas@post.tau.ac.il, shakhar@courant.nyu.edu. Noga Alon, Haim Kaplan, Gabriel­MINERVA Center for Geometry at Tel Aviv University. Work by Haim Kaplan was partially supported by ISF Grant 975

  12. Statistical properties of heartbeat intervals during atrial fibrillation Wanzhen Zeng and Leon Glass

    E-Print Network [OSTI]

    Glass, Leon

    Statistical properties of heartbeat intervals during atrial fibrillation Wanzhen Zeng and Leon node which provides an electrical pathway between the atria and the main pumping chambers of the heart in cardiology that docu- ments the statistical properties of the ventricular activity dur- ing atrial

  13. TSAR: A Two Tier Sensor Storage Architecture Using Interval Skip Graphs

    E-Print Network [OSTI]

    Ganesan, Deepak

    metadata by employing local archiving at the sensors and distributed indexing at the proxies. At the proxyTSAR: A Two Tier Sensor Storage Architecture Using Interval Skip Graphs Peter Desnoyers, Deepak pjd@cs.umass.edu, dganesan@cs.umass.edu, shenoy@cs.umass.edu ABSTRACT Archival storage of sensor data

  14. PCA-based bootstrap confidence interval tests for gene-disease association involving multiple SNPs

    E-Print Network [OSTI]

    Peng, Qianqian; Zhao, Jinghua; Xue, Fuzhong

    2010-01-26

    confidence interval test (PCA-BCIT), which directly uses the PC scores to assess gene-disease association, was developed and evaluated for three ways of extracting PCs, i.e., cases only(CAES), controls only(COES) and cases and controls combined...

  15. Stress evolution of the San Andreas fault system: Recurrence interval versus locking depth

    E-Print Network [OSTI]

    Smith-Konter, Bridget

    Stress evolution of the San Andreas fault system: Recurrence interval versus locking depth Bridget by stress that has accumulated in the upper locked portion of the crust. The present-day stress accumulation rate on any given fault segment is fairly well resolved by current geodetic measurements. Model stress

  16. LYAPUNOV SPECTRAL INTERVALS: THEORY AND COMPUTATION LUCA DIECI y AND ERIK S. VAN VLECK z

    E-Print Network [OSTI]

    Van Vleck, Erik S.

    LYAPUNOV SPECTRAL INTERVALS: THEORY AND COMPUTATION #3; LUCA DIECI y AND ERIK S. VAN VLECK z dichotomy of Sacker and Sell and the spectrum de#12;ned in terms of upper and lower Lyapunov exponents information. Finally, we discuss the algorithms we have used to approximate the Lyapunov and Sacker

  17. Sustainable distributed biodiesel manufacturing under uncertainty: An interval-parameter-programming-based approach

    E-Print Network [OSTI]

    Huang, Yinlun

    Sustainable distributed biodiesel manufacturing under uncertainty: An interval A sophisticated biodiesel manufacturing study demonstrated methodological efficacy. a r t i c l e i n f o Article Simulation Uncertainty a b s t r a c t Biodiesel, a clean-burning alternative fuel, can be produced using

  18. Two intervals R\\'enyi entanglement entropy of compact free boson on torus

    E-Print Network [OSTI]

    Liu, Feihu

    2015-01-01

    We compute the $N=2$ R\\'enyi entanglement entropy of two intervals at equal time in a circle, for the theory of a 2d compact complex free scalar at finite temperature. This is carried out by performing functional integral on a genus 3 ramified cover of the torus, wherein the quantum part of the integral is captured by the four point function of twist fields on the worldsheet torus, and the classical piece is given by summing over winding modes of the genus 3 surface onto the target space torus. The final result is given in terms of a product of theta function and certain multi-dimensional theta function. We demonstrate the T-duality invariance of the result. We also study its low temperature limit. In the case in which the size of the intervals and of their separation are much smaller than the whole system, our result is in exact agreement with the known result for two intervals on an infinite system at zero temperature \\cite{eeoftwo}. In the case in which the separation between the two intervals is much smal...

  19. Physiological responses of reining horses to interval training versus conventional training procedures 

    E-Print Network [OSTI]

    Haney, Elizabeth anne

    1998-01-01

    approaching fatigue on d 2 and 5. On interval work days, 'ton-board'' heart rate monitors were used to record heart rates through a series of anaerobic maneuver repetitions with 1 min of recovery in between repetitions. When peak and recovery heart rates...

  20. A Genealogy for Finite Kneading Sequences of Bimodal Maps on the Interval

    E-Print Network [OSTI]

    John Ringland; Charles Tresser

    1993-07-20

    We generate all the finite kneading sequences of one of the two kinds of bimodal map on the interval, building each sequence uniquely from a pair of shorter ones. There is a single pair at generation 0, with members of length 1. Concomitant with this genealogy of kneading sequences is a unified genealogy of all the periodic orbits. (6/93)

  1. VARIABILITY OF SOLAR RADIATION DATA OVER SHORT TIME INTERVALS Frank Vignola

    E-Print Network [OSTI]

    Oregon, University of

    VARIABILITY OF SOLAR RADIATION DATA OVER SHORT TIME INTERVALS Frank Vignola Department of Physics ra- diation. This article examines at the variability of beam and global solar radiation over short solar radiation values with ground-based data. 1. INTRODUCTION It is difficult to evaluate solar

  2. Nuclear Data Needs and Capabilities for Applications

    E-Print Network [OSTI]

    Bernstein, Lee; Hurst, Aaron; Kelly, John; Kondev, Filip; McCutchan, Elizabeth; Nesaraja, Caroline; Slaybaugh, Rachel; Sonzogni, Alejandro

    2015-01-01

    The Workshop on Nuclear Data Needs and Capabilities for Applications (NDNCA) was held at Lawrence Berkeley National Laboratory (LBNL) on 27-29 May 2015. The goals of NDNCA were compile nuclear data needs across a wide spectrum of applied nuclear science, and to provide a summary of associated capabilities (accelerators, reactors, spectrometers, etc.) available for required measurements. This document represents the results of the workshop and a compilation of other recent documents assessing nuclear data needs for the above-mentioned applications.

  3. Basic Research Needs: Catalysis for Energy

    SciTech Connect (OSTI)

    Bell, Alexis T.; Gates, Bruce C.; Ray, Douglas; Thompson, Michael R.

    2008-03-11

    The report presents results of a workshop held August 6-8, 2007, by DOE SC Basic Energy Sciences to determine the basic research needs for catalysis research.

  4. Composite Tube Trailer Design/Manufacturing Needs

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2 Objectives * Meet market needs for cost effective, light weight, bulk transport of CNG and CH2 - Requires composite cylinders for light weight (cargo is volume limited, not...

  5. Delineating a road-salt plume in lakebed sediments using electrical resistivity, piezometers, and seepage meters at Mirror Lake,

    E-Print Network [OSTI]

    Toran, Laura

    , New Hampshire, U.S.A. A combination of bottom-cable and floating-cable electrical-resistivity surveys, and seepage meters at Mirror Lake, New Hampshire, U.S.A Laura Toran1 , Melanie Johnson1 , Jonathan Nyquist1Delineating a road-salt plume in lakebed sediments using electrical resistivity, piezometers

  6. The Impact of Rate Design and Net Metering on the Bill Savings from Distributed PV for Residential Customers in California

    SciTech Connect (OSTI)

    Energy and Resources Group, University of California, Berkeley; Darghouth, Naim R.; Barbose, Galen; Wiser, Ryan

    2011-06-01

    Net metering has become a widespread mechanism in the U.S. for supporting customer adoption of distributed photovoltaics (PV), but has faced challenges as PV installations grow to a larger share of generation in a number of states. This paper examines the value of the bill savings that customers receive under net metering, and the associated role of retail rate design, based on a sample of approximately two hundred residential customers of California's two largest electric utilities. We find that the bill savings per kWh of PV electricity generated varies by more than a factor of four across the customers in the sample, which is largely attributable to the inclining block structure of the utilities' residential retail rates. We also compare the bill savings under net metering to that received under three potential alternative compensation mechanisms, based on California's Market Price Referent (MPR). We find that net metering provides significantly greater bill savings than a full MPR-based feed-in tariff, but only modestly greater savings than alternative mechanisms under which hourly or monthly net excess generation is compensated at the MPR rate.

  7. Description of Model Data for SNL100-00: The Sandia 100-meter All-glass Baseline Wind Turbine

    E-Print Network [OSTI]

    D. Todd Griffith, Brian R. Resor Sandia National Laboratories Wind and Water Power TechnologiesDescription of Model Data for SNL100-00: The Sandia 100-meter All-glass Baseline Wind Turbine Blade version and date, description, etc). A summary of the blade model data is also provided from the design

  8. Proposed structure for a crossed-laser beam, GeV per meter gradient, vacuum electron linear accelerator

    E-Print Network [OSTI]

    Byer, Robert L.

    Proposed structure for a crossed-laser beam, GeV per meter gradient, vacuum electron linear We propose a dielectric-based, multistaged, laser-driven electron linear accelerator structure operating in a vacuum that is capable of accelerating electrons to 1 TeV in 1 km. Our study shows that a Ge

  9. An amalgamated meter-thick sedimentary package enabled by the 2011 Tohoku tsunami in El Garrapatero, Galapagos Islands

    E-Print Network [OSTI]

    Lynett, Patrick

    An amalgamated meter-thick sedimentary package enabled by the 2011 Tohoku tsunami in El Garrapatero: Received 23 April 2012 Available online 21 May 2013 Keywords: Tsunami deposits Coastal morphology Natural hazards Tsunamis and storms instigate sedimentological and geomorphological changes to the coastal system

  10. Hanford science and technology needs statements document

    SciTech Connect (OSTI)

    Piper, L.L.

    1997-12-31

    This document is a compilation of the Hanford science and technology needs statements for FY 1998. The needs were developed by the Hanford Site Technology Coordination Group (STCG) with full participation and endorsement of site user organizations, stakeholders, and regulators. The purpose of this document is to: (a) provide a comprehensive listing of Hanford science and technology needs, and (b) identify partnering and commercialization opportunities with industry, other federal and state agencies, and the academic community. The Hanford STCG reviews and updates the needs annually. Once completed, the needs are communicated to DOE for use in the development and prioritization of their science and technology programs, including the Focus Areas, Cross-Cutting Programs, and the Environmental Management Science Program. The needs are also transmitted to DOE through the Accelerating Cleanup: 2006 Plan. The public may access the need statements on the Internet on: the Hanford Home Page (www.hanford.gov), the Pacific Rim Enterprise Center`s web site (www2.pacific-rim.org/pacific rim), or the STCG web site at DOE headquarters (em-52.em.doegov/ifd/stcg/stcg.htm). This page includes links to science and technology needs for many DOE sites. Private industry is encouraged to review the need statements and contact the Hanford STCG if they can provide technologies that meet these needs. On-site points of contact are included at the ends of each need statement. The Pacific Rim Enterprise Center (206-224-9934) can also provide assistance to businesses interested in marketing technologies to the DOE.

  11. Technology needs for decommissioning and decontamination

    SciTech Connect (OSTI)

    Bundy, R.D.; Kennerly, J.M.

    1993-12-01

    This report summarizes the current view of the most important decontamination and decommissioning (D & D) technology needs for the US Department of Energy facilities for which the D & D programs are the responsibility of Martin Marietta Energy Systems, Inc. The source of information used in this assessment was a survey of the D & D program managers at each facility. A summary of needs presented in earlier surveys of site needs in approximate priority order was supplied to each site as a starting point to stimulate thinking. This document reflects a brief initial assessment of ongoing needs; these needs will change as plans for D & D are finalized, some of the technical problems are solved through successful development programs, and new ideas for D and D technologies appear. Thus, this assessment should be updated and upgraded periodically, perhaps, annually. This assessment differs from others that have been made in that it directly and solely reflects the perceived need for new technology by key personnel in the D & D programs at the various facilities and does not attempt to consider the likelihood that these technologies can be successfully developed. Thus, this list of technology needs also does not consider the cost, time, and effort required to develop the desired technologies. An R & D program must include studies that have a reasonable chance for success as well as those for which there is a high need. Other studies that considered the cost and probability of successful development as well as the need for new technology are documented. However, the need for new technology may be diluted in such studies; this document focuses only on the need for new technology as currently perceived by those actually charged with accomplishing D & D.

  12. Research Needs Workshop for Magnetic Fusion Energy

    E-Print Network [OSTI]

    ReNeW Research Needs Workshop for Magnetic Fusion Energy June 7-13, 2009 Richard Hazeltine, ReNeW for Magnetic Fusion Energy Sciences Report of the Research Needs Workshop (ReNeW) Bethesda, Maryland ­ June 8-12, 2009 OFFICE OF FUSION ENERGY SCIENCES Wednesday, November 25, 2009 #12;Acknowledgements ReNeW

  13. DOE handbook table-top needs analysis

    SciTech Connect (OSTI)

    1996-03-01

    Purpose of this handbook is to establish guidelines for training personnel in developing training for operation, maintenance, and technical support personnel at DOE nuclear facilities. Information from this handbook can be used to conduct needs analysis as the information and methods apply. Operating contractors are encouraged to use good practices selectively in developing or improving programs to meet the specific needs of their facility.

  14. Information Needs in Software Ecosystems Development

    E-Print Network [OSTI]

    Jäger, Gerhard

    Information Needs in Software Ecosystems Development A Contribution to Improve Tool Support Across-evolution of projects that depend and rely on each other, these software ecosystems have led to an increased importance an investigation into the nature of the information needs of software developers working on projects that are part

  15. CCD drift-scan imaging lunar occultations: a feasible approach for sub-meter class telescopes

    E-Print Network [OSTI]

    O. Fors; J. Nunez; A. Richichi

    2001-08-27

    A CCD drift-scanning technique for lunar occultation (LO) observations is presented. While this approach has been addressed before by Sturmann (1994) for the case of large telescopes, the technical validity has never been discussed for sub-meter class telescopes. In contrast to Sturmann's scheme, the proposed technique places the CCD in the image plane of the telescope. This does not represent a problem in the case of small telescopes, where the practical angular resolution attainable by LO is not limited by aperture smoothing. Photon-generated charge is read out at millisecond rate on a column-per-column basis, as the diffraction pattern of the occulted star is being tracked. Two LO events (SAO 79031 and SAO 77911) were observed to demonstrate the feasibility of the method. Data analysis was carried out and no angular diameter the observed stars were resolved. We show, however, that the technique could be useful for close binary detections with small telescopes. A discussion of the limiting resolution and magnitude imposed by our instrumentation is carried out, showing that drift-scanning technique could be extended to 1-2m telescopes for stellar diameter determination purposes. Finally, we point out that the technical demands required by this technique can be easily met by most small professional observatories and advanced amateurs.

  16. An Efficient Format for Nearly Constant-Time Access to Arbitrary Time Intervals in Large Trace Files

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Chan, Anthony; Gropp, William; Lusk, Ewing

    2008-01-01

    A powerful method to aid in understanding the performance of parallel applications uses log or trace files containing time-stamped events and states (pairs of events). These trace files can be very large, often hundreds or even thousands of megabytes. Because of the cost of accessing and displaying such files, other methods are often used that reduce the size of the tracefiles at the cost of sacrificing detail or other information. This paper describes a hierarchical trace file format that provides for display of an arbitrary time window in a time independent of the total size of the file and roughlymore »proportional to the number of events within the time window. This format eliminates the need to sacrifice data to achieve a smaller trace file size (since storage is inexpensive, it is necessary only to make efficient use of bandwidth to that storage). The format can be used to organize a trace file or to create a separate file ofannotationsthat may be used with conventional trace files. We present an analysis of the time to access all of the events relevant to an interval of time and we describe experiments demonstrating the performance of this file format.« less

  17. National Postirradiation Examination Workshop Needs Assessment

    SciTech Connect (OSTI)

    Not listed

    2011-09-01

    The development of nuclear fuels and materials requires a clear understanding of irradiation effects on the materials performance. Development of this understanding at present relies on irradiation experiments ranging from tests aimed at targeted phenomenology to integral effects under both prototypic and off-normal conditions. Within the new DOE paradigm of a science-based approach aimed at more fundamental understanding of fuel performance, more specialized experiments and measurements are needed. To support the development of such fuels and materials, especially under a science-based development strategy, the nation needs a consolidated, state-of-the-art, post-irradiation examination (PIE) capability that can reliably extract the needed data from the experimental programs. In some cases, new capabilities beyond the current state-of-the art need to be developed and implemented to perform measurements that were not needed in the more empirically based approaches used in earlier fuel development and qualification programs. A national PIE workshop was held in March 2011 which solicited the PIE needs that are necessary to support both DOE and U.S. goals for nuclear energy. These needs recognize that significant capability already exists that must be maintained, upgraded and continued while bringing online new capabilities that support research on highly irradiated fuels and materials. Further, these needs mostly focus on the reducing the time and length scales in which materials can be examined and coupling these measurements with a robust modeling capability within an infrastructure that can meet the needs of higher demand and a variety of customers. A consolidated capability where a comprehensive set of measurements can be simultaneously performed is essential for efficiently implementing fuel and materials development programs in a cost effective manner. This document captures the national PIE needs necessary to support current and future research, and where possible identifies where those capabilities are allocated.

  18. Glass needs for a growing photovoltaics industry

    SciTech Connect (OSTI)

    Burrows, Keith; Fthenakis, Vasilis

    2015-01-01

    With the projected growth in photovoltaics, the demand for glass for the solar industry will far exceed the current supply, and thousands of new float-glass plants will have to be built to meet its needs over the next 20 years. Such expansion will provide an opportunity for the solar industry to obtain products better suited to their needs, such as low-iron glass and borosilicate glass at the lowest possible price. While there are no significant technological hurdles that would prevent the flat glass industry from meeting the solar industry’s projected needs, to do so will require advance planning and substantial investments.

  19. Glass needs for a growing photovoltaics industry

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Burrows, Keith; Fthenakis, Vasilis

    2014-10-18

    With the projected growth in photovoltaics, the demand for glass for the solar industry will far exceed the current supply, and thousands of new float-glass plants will have to be built to meet its needs over the next 20 years. Such expansion will provide an opportunity for the solar industry to obtain products better suited to their needs, such as low-iron glass and borosilicate glass at the lowest possible price. While there are no significant technological hurdles that would prevent the flat glass industry from meeting the solar industry’s projected needs, to do so will require advance planning and substantialmore »investments.« less

  20. Glass needs for a growing photovoltaics industry

    SciTech Connect (OSTI)

    Burrows, Keith; Fthenakis, Vasilis

    2014-10-18

    With the projected growth in photovoltaics, the demand for glass for the solar industry will far exceed the current supply, and thousands of new float-glass plants will have to be built to meet its needs over the next 20 years. Such expansion will provide an opportunity for the solar industry to obtain products better suited to their needs, such as low-iron glass and borosilicate glass at the lowest possible price. While there are no significant technological hurdles that would prevent the flat glass industry from meeting the solar industry’s projected needs, to do so will require advance planning and substantial investments.

  1. HANFORD SCIENCE & TECHNOLOGY NEEDS STATEMENTS 2002

    SciTech Connect (OSTI)

    WIBLE, R.A.

    2002-04-01

    This document: (a) provides a comprehensive listing of the Hanford sites science and technology needs for fiscal year (FY) 2002; and (b) identifies partnering and commercialization opportunities within industry, other federal and state agencies, and the academic community. These needs were prepared by the Hanford projects (within the Project Hanford Management Contract, the Environmental Restoration Contract and the River Protection Project) and subsequently reviewed and endorsed by the Hanford Site Technology Coordination Group (STCG). The STCG reviews included participation of DOE-RL and DOE-ORP Management, site stakeholders, state and federal regulators, and Tribal Nations. These needs are reviewed and updated on an annual basis and given a broad distribution.

  2. CP(N-1) model on finite interval in the large N limit

    E-Print Network [OSTI]

    A. Milekhin

    2012-07-02

    The CP(N-1) \\sigma\\ model on finite interval of length R with Dirichlet boundary conditions is analysed in the 1/N expansion. The theory has two phases, separated by a phase transition at R ~ 1/\\Lambda, \\Lambda\\ is dynamical scale of the CP(N-1) model. The vacuum energy dependence of R, and especially Casimir-type scaling 1/R, is discussed.

  3. Multi-Level Interval Estimation for Locating damage in Structures by Using Artificial Neural Networks

    SciTech Connect (OSTI)

    Pan Danguang; Gao Yanhua; Song Junlei [School of Civil and Environmental Engineering, University of Science and Technology Beijing, Beijing, 100083 (China)

    2010-05-21

    A new analysis technique, called multi-level interval estimation method, is developed for locating damage in structures. In this method, the artificial neural networks (ANN) analysis method is combined with the statistics theory to estimate the range of damage location. The ANN is multilayer perceptron trained by back-propagation. Natural frequencies and modal shape at a few selected points are used as input to identify the location and severity of damage. Considering the large-scale structures which have lots of elements, multi-level interval estimation method is developed to reduce the estimation range of damage location step-by-step. Every step, estimation range of damage location is obtained from the output of ANN by using the method of interval estimation. The next ANN training cases are selected from the estimation range after linear transform, and the output of new ANN estimation range of damage location will gained a reduced estimation range. Two numerical example analyses on 10-bar truss and 100-bar truss are presented to demonstrate the effectiveness of the proposed method.

  4. Is a Short-Interval Postradiation Mammogram Necessary After Conservative Surgery and Radiation in Breast Cancer?

    SciTech Connect (OSTI)

    Lin, Kevin Eradat, Jilbert B.S.; Mehta, Niraj H.; Bent, Chris; Lee, Steve P.; Apple, Sophia K.; Bassett, Lawrence W.

    2008-11-15

    Purpose: To examine, in a retrospective study, whether the initial posttreatment mammogram offers any benefit to patients. Methods and Materials: Patients were selected who had radiation after breast-conservation therapy from 1995 through 2005 and had follow-up mammography at University of California-Los Angeles (UCLA) within 1 year of completing radiotherapy. Results of the initial follow-up mammogram were analyzed to determine the yield of this initial mammogram. Results: Between 1995 and 2005, 408 patients treated with breast-conserving therapy and radiation had follow-up mammograms at UCLA within 1 year of completion of radiation. Median age at radiation completion was 56.9 years. Median interval between radiation and the initial mammogram was 3.1 months. Ten patients were found to have suspicious findings on the initial postradiation mammogram, prompting biopsy, but only 2 were found to have recurrent cancer. None of those lesions were palpable. In both cases the recurrences were ductal carcinoma in situ. Thus, the yield of the initial postoperative mammogram as compared with physical examination findings is estimated at 0.49 recurrences detected per 100 mammograms performed (95% confidence interval 0.059-1.759). Conclusions: The yield of the initial postradiation mammography at UCLA seems to be low, and only noninvasive carcinomas were found. Our data support the rationale to avoid the initial short-interval postradiation mammography and evaluate patients at 12 months.

  5. Basic Research Needs for the Hydrogen Economy

    Fuel Cell Technologies Publication and Product Library (EERE)

    The Basic Energy Sciences (BES) Workshop on Hydrogen Production, Storage and Use was held May 13-15, 2003 to assess the basic research needs to assure a secure energy future. This report is based on t

  6. Resuspension and dry deposition research needs

    SciTech Connect (OSTI)

    Sehmel, G.A.

    1983-01-01

    The author concludes that better predictive models are needed for the signifcant health, ecological, and economic impacts of resuspended particles and their subsequent dry deposition. Both chemical and radioactive aerosols are discussed. (PSB)

  7. Basic Research Needs for Countering Terrorism

    SciTech Connect (OSTI)

    Stevens, W.; Michalske, T.; Trewhella, J.; Makowski, L.; Swanson, B.; Colson, S.; Hazen, T.; Roberto, F.; Franz, D.; Resnick, G.; Jacobson, S.; Valdez, J.; Gourley, P.; Tadros, M.; Sigman, M.; Sailor, M.; Ramsey, M.; Smith, B.; Shea, K.; Hrbek, J.; Rodacy, P.; Tevault, D.; Edelstein, N.; Beitz, J.; Burns, C.; Choppin, G.; Clark, S.; Dietz, M.; Rogers, R.; Traina, S.; Baldwin, D.; Thurnauer, M.; Hall, G.; Newman, L.; Miller, D.; Kung, H.; Parkin, D.; Shuh, D.; Shaw, H.; Terminello, L.; Meisel, D.; Blake, D.; Buchanan, M.; Roberto, J.; Colson, S.; Carling, R.; Samara, G.; Sasaki, D.; Pianetta, P.; Faison, B.; Thomassen, D.; Fryberger, T.; Kiernan, G.; Kreisler, M.; Morgan, L.; Hicks, J.; Dehmer, J.; Kerr, L.; Smith, B.; Mays, J.; Clark, S.

    2002-03-01

    To identify connections between technology needs for countering terrorism and underlying science issues and to recommend investment strategies to increase the impact of basic research on efforts to counter terrorism.

  8. Needs for Robotic Assessments of Nuclear Disasters

    SciTech Connect (OSTI)

    Victor Walker; Derek Wadsworth

    2012-06-01

    Following the nuclear disaster at the Fukushima nuclear reactor plant in Japan, the need for systems which can assist in dynamic high-radiation environments such as nuclear incidents has become more apparent. The INL participated in delivering robotic technologies to Japan and has identified key components which are needed for success and obstacles to their deployment. In addition, we are proposing new work and methods to improve assessments and reactions to such events in the future. Robotics needs in disaster situations include phases such as: Assessment, Remediation, and Recovery Our particular interest is in the initial assessment activities. In assessment we need collection of environmental parameters, determination of conditions, and physical sample collection. Each phase would require key tools and efforts to develop. This includes study of necessary sensors and their deployment methods, the effects of radiation on sensors and deployment, and the development of training and execution systems.

  9. Status Report on the Passive Neutron Enrichment Meter (PNEM) for UF6 Cylinder Assay

    SciTech Connect (OSTI)

    Miller, Karen A.; Swinhoe, Martyn T.; Menlove, Howard O.; Marlow, Johnna B.

    2012-05-02

    The Passive Neutron Enrichment Meter (PNEM) is a nondestructive assay (NDA) system being developed at Los Alamos National Laboratory (LANL). It was designed to determine {sup 235}U mass and enrichment of uranium hexafluoride (UF{sub 6}) in product, feed, and tails cylinders (i.e., 30B and 48Y cylinders). These cylinders are found in the nuclear fuel cycle at uranium conversion, enrichment, and fuel fabrication facilities. The PNEM is a {sup 3}He-based neutron detection system that consists of two briefcase-sized detector pods. A photograph of the system during characterization at LANL is shown in Fig. 1. Several signatures are currently being studied to determine the most effective measurement and data reduction technique for unfolding {sup 235}U mass and enrichment. The system collects total neutron and coincidence data for both bare and cadmium-covered detector pods. The measurement concept grew out of the success of the Uranium Cylinder Assay System (UCAS), which is an operator system at Rokkasho Enrichment Plant (REP) that uses total neutron counting to determine {sup 235}U mass in UF{sub 6} cylinders. The PNEM system was designed with higher efficiency than the UCAS in order to add coincidence counting functionality for the enrichment determination. A photograph of the UCAS with a 48Y cylinder at REP is shown in Fig. 2, and the calibration measurement data for 30B product and 48Y feed and tails cylinders is shown in Fig. 3. The data was collected in a low-background environment, meaning there is very little scatter in the data. The PNEM measurement concept was first presented at the 2010 Institute of Nuclear Materials Management (INMM) Annual Meeting. The physics design and uncertainty analysis were presented at the 2010 International Atomic Energy Agency (IAEA) Safeguards Symposium, and the mechanical and electrical designs and characterization measurements were published in the ESARDA Bulletin in 2011.

  10. Z .International Journal of Psychophysiology 32 1999 239 250 Attentional modulation of short-and long-lead-interval

    E-Print Network [OSTI]

    - and long-lead-interval modification of the acoustic startle eyeblink response: comparing auditory that modification of startle by lead stimuli with short- and long-lead-intervals is modulated by stimulus significance. The significant stimulus in a tone duration judgement task generates enhanced short-lead

  11. Weak Unit Disk and Interval Representation of Graphs M. J. Alam, S. G. Kobourov, S. Pupyrev, and J. Toeniskoetter

    E-Print Network [OSTI]

    Kobourov, Stephen G.

    Weak Unit Disk and Interval Representation of Graphs M. J. Alam, S. G. Kobourov, S. Pupyrev, and J of intersection representations with unit balls: unit disks in the plane and unit intervals on the line. Given is to represent the vertices of the graph by unit-size balls so that the balls for two adjacent vertices intersect

  12. Hanford science and technology needs statements, 1999

    SciTech Connect (OSTI)

    Berlin, G.T.

    1998-09-30

    In the aftermath of the Cold War, the US has begun addressing the environmental consequences of five decades of nuclear weapons production. In November 1989, DOE established the Office of Environmental Restoration and Waste Management (EM) as the central authority for cleaning up the DOE weapons complex legacy of pollution, for preventing further environmental contamination, and for instituting responsible environmental management. While performing its tasks, EM found that many aspects of its large and complex decisions could not be achieved using existing science and technology or without incurring unreasonable costs, risks, or schedule impacts. Consequently, a process was developed to solicit needs from around the DOE complex and focus the science and technology resources of EM-50, the National Laboratories, private industry, and collages and universities on those needs. This document describes those needs which the Hanford Site has identified as requiring additional science or technology to complete.

  13. Hanford science and technology needs statements, 2000

    SciTech Connect (OSTI)

    BERLIN, G.T.

    1999-07-16

    In the aftermath of the Cold War, the United States has begun addressing the environmental consequences of five decades of nuclear weapons production. In November 1989, DOE established the Office of Environmental Restoration and Waste Management (EM) as the central authority for cleaning up the DOE weapons complex legacy of pollution, for preventing further environmental contamination, and for instituting responsible environmental management. While performing its tasks, EM found that many aspects of its large and complex mission could not be achieved using existing science and technology or without incurring unreasonable costs, risks, or schedule impacts. Consequently, a process was developed to solicit needs from around the DOE complex and focus the science and technology resources of EM-50, the National Laboratories, private industry, and colleges and universities on those needs. This document describes those needs that the Hanford Site has identified as requiring additional science or technology to complete.

  14. Time interval measurement device based on surface acoustic wave filter excitation, providing 1 ps precision and stability

    SciTech Connect (OSTI)

    Panek, Petr; Prochazka, Ivan [Institute of Photonics and Electronics, Academy of Sciences of the Czech Republic, Chaberska 57, 182 51 Prague (Czech Republic)

    2007-09-15

    This article deals with the time interval measurement device, which is based on a surface acoustic wave (SAW) filter as a time interpolator. The operating principle is based on the fact that a transversal SAW filter excited by a short pulse can generate a finite signal with highly suppressed spectra outside a narrow frequency band. If the responses to two excitations are sampled at clock ticks, they can be precisely reconstructed from a finite number of samples and then compared so as to determine the time interval between the two excitations. We have designed and constructed a two-channel time interval measurement device which allows independent timing of two events and evaluation of the time interval between them. The device has been constructed using commercially available components. The experimental results proved the concept. We have assessed the single-shot time interval measurement precision of 1.3 ps rms that corresponds to the time of arrival precision of 0.9 ps rms in each channel. The temperature drift of the measured time interval on temperature is lower than 0.5 ps/K, and the long term stability is better than {+-}0.2 ps/h. These are to our knowledge the best values reported for the time interval measurement device. The results are in good agreement with the error budget based on the theoretical analysis.

  15. Workshop on indoor air quality research needs

    SciTech Connect (OSTI)

    Not Available

    1980-01-01

    Workshop participants report on indoor air quality research needs including the monitoring of indoor air quality, report of the instrumentation subgroup of indoor air quality, health effects, and the report of the control technology session. Risk analysis studies addressing indoor environments were also summarized. (DLS)

  16. Life Cycle Cost Housing Need and Sustainability

    E-Print Network [OSTI]

    Life Cycle Cost Housing Need and Sustainability Abstract: Jordan is actually facing a rapid urban became difficult to sustain especially concerning the slum areas and the environmental pollution due which could contribute to increase the productivity and sustainability taking into consideration

  17. Web Services Need Consistency Giacomo Piccinelli

    E-Print Network [OSTI]

    Finkelstein, Anthony

    Web Services Need Consistency Giacomo Piccinelli Hewlett-Packard Laboratories Stoke Gifford Park.finkelstein|c.nentwich}@cs.ucl.ac.uk Abstract Web Services provide a powerful access channel to business capabilities. Inside the company can be streamlined and business opportunities extended. A major issue with the current Web Service

  18. Nanotechnology Needs Assessment What is Nanotechnology?

    E-Print Network [OSTI]

    Lewis, Robert Michael

    #12;1 Nanotechnology Needs Assessment What is Nanotechnology? The term nanomaterial technically are the inhabitants. Nanotechnology, then, is the design, characterization, production and application of structures, physical, and chemical reactivity is known as "bottom-up" production.2 Nanotechnology is a growing field

  19. Export Control What We Need to Know

    E-Print Network [OSTI]

    Wood, Marcelo A.

    UC Irvine Export Control Training: What We Need to Know May 29, 2009 #12;UC IRVINE | EXPORT CONTROL COMPLIANCE TRAINING | 2 > Training Agenda 1. Introduction: Why is Awareness So Critical? 2. What Are Export. Where Do I Go for Help? #12;UC IRVINE | EXPORT CONTROL COMPLIANCE TRAINING | 3 1. Introduction: Why

  20. What Lung Cancer Patients Need to Know

    E-Print Network [OSTI]

    Kaski, Samuel

    What Lung Cancer Patients Need to Know About Bone Health A Publication of The Bone and Cancer Foundation #12;Contents THIS PUBLICATION PROVIDES IMPORTANT INFORMATION ABOUT THE RELATIONSHIP BETWEEN LUNG CANCER AND BONE HEALTH. HOW BONE WORKS (PAGE 2). WHAT LUNG CANCER CAN DO TO BONE (PAGE 2). TREATING BONE

  1. PEV Infrastructure Needs UC Davis Policy Institute

    E-Print Network [OSTI]

    California at Davis, University of

    ,000 sales in 2012, ramp up to 20,000/yr in 2013 2012 Honda Fit EV 2012 Tesla Model S Infrastructure needs vary PEVs Available in 2012 Increasing Battery size, PHEV - BEV #12;5 PEV Charging Infrastructure · Tesla · Toyota Regional Government · CAPCOA, Sonoma · BAAQMD · SCAQMD Utilities · LADWP · PG&E · SCE

  2. NEEDS SIZE ADJUSTMENT 2 Perfect Chemistry

    E-Print Network [OSTI]

    Chapman, Michael S.

    NEEDS SIZE ADJUSTMENT #12;2 Perfect Chemistry 8 Starr Power 10 Balancing Act 14 A Rare Thing.B.A. EDitors Dee Metaj Jill Smith DEsigN Anderson McConaughy Design Co. WritErs Todd Schwartz Jill Smith Jim and friends. Please send correspondence to: Bridges Magazine sm-alum@ohsu.edu OHSU School of Medicine 3181 SW

  3. Standing corn rows needed to help

    E-Print Network [OSTI]

    Minnesota, University of

    Standing corn rows needed to help reduce drifting snow By PAULA MOHR T HE Minnesota Department of Transportation is looking for more farmers to par- ticipate in its standing corn row program to help reduce and pays farmers to leave cornstalks up throughout the winter. Farmers are reimbursed for standing corn

  4. The Entanglement Renyi Entropies of Disjoint Intervals in AdS/CFT

    E-Print Network [OSTI]

    Thomas Faulkner

    2013-03-28

    We study entanglement Renyi entropies (EREs) of 1+1 dimensional CFTs with classical gravity duals. Using the replica trick the EREs can be related to a partition function of n copies of the CFT glued together in a particular way along the intervals. In the case of two intervals this procedure defines a genus n-1 surface and our goal is to find smooth three dimensional gravitational solutions with this surface living at the boundary. We find two families of handlebody solutions labelled by the replica index n. These particular bulk solutions are distinguished by the fact that they do not spontaneously break the replica symmetries of the boundary surface. We show that the regularized classical action of these solutions is given in terms of a simple numerical prescription. If we assume that they give the dominant contribution to the gravity partition function we can relate this classical action to the EREs at leading order in G_N. We argue that the prescription can be formulated for non-integer n. Upon taking the limit n -> 1 the classical action reproduces the predictions of the Ryu-Takayanagi formula for the entanglement entropy.

  5. Scaling and memory of intraday volatility return intervals in stock market

    E-Print Network [OSTI]

    Wang, F; Stanley, H E; Yamasaki, K; Havlin, Shlomo; Wang, Fengzhong; Yamasaki, Kazuko

    2006-01-01

    We study the return interval $\\tau$ between price volatilities that are above a certain threshold $q$ for 31 intraday datasets, including the Standard & Poor's 500 index and the 30 stocks that form the Dow Jones Industrial index. For different threshold $q$, the probability density function $P_q(\\tau)$ scales with the mean interval $\\bar{\\tau}$ as $P_q(\\tau)={\\bar{\\tau}}^{-1}f(\\tau/\\bar{\\tau})$, similar to that found in daily volatilities. Since the intraday records have significantly more data points compared to the daily records, we could probe for much higher thresholds $q$ and still obtain good statistics. We find that the scaling function $f(x)$ is consistent for all 31 intraday datasets in various time resolutions, and the function is well approximated by the stretched exponential, $f(x)\\sim e^{-a x^\\gamma}$, with $\\gamma=0.38\\pm 0.05$ and $a=3.9\\pm 0.5$, which indicates the existence of correlations. We analyze the conditional probability distribution $P_q(\\tau|\\tau_0)$ for $\\tau$ following a certa...

  6. Evaluation Of A Turbidity Meter For Use At The Defense Waste Processing Facility

    SciTech Connect (OSTI)

    Mahannah, R. N.; Edwards, T. B.

    2013-01-15

    Savannah River Remediation's (SRR's) Defense Waste Processing Facility (DWPF) Laboratory currently tests for sludge carry-over into the Recycle Collection Tank (RCT) by evaluating the iron concentration in the Slurry Mix Evaporator Condensate Tank (SMECT) and relating this iron concentration to the amount of sludge solids present. A new method was proposed for detecting the amount of sludge in the SMECT that involves the use of an Optek turbidity sensor. Waste Services Laboratory (WSL) personnel conducted testing on two of these units following a test plan developed by Waste Solidification Engineering (WSE). Both Optek units (SN64217 and SN65164) use sensor model AF16-N and signal converter model series C4000. The sensor body of each unit was modified to hold a standard DWPF 12 cc sample vial, also known as a ''peanut'' vial. The purpose of this testing was to evaluate the use of this model of turbidity sensor, or meter, to provide a measurement of the sludge solids present in the SMECT based upon samples from that tank. During discussions of the results from this study by WSE, WSL, and Savannah River National Laboratory (SRNL) personnel, an upper limit on the acceptable level of solids in SMECT samples was set at 0.14 wt%. A ''go/no-go'' decision criterion was to be developed for the critical turbidity response, which is expressed in concentration units (CUs), for each Optek unit based upon the 0.14 wt% solids value. An acceptable or a ''go'' decision for the SMECT should reflect the situation that there is an identified risk (e.g. 5%) for a CU response from the Optek unit to be less than the critical CU value when the solids content of the SMECT is actually 0.14 wt% or greater, while a ''no-go'' determination (i.e., an Optek CU response above the critical CU value, a conservative decision relative to risk) would lead to additional evaluations of the SMECT to better quantify the possible solids content of the tank. A sludge simulant was used to develop standards for testing both Optek units and to determine the viability of a ''go/no-go'' CU response for each of the units. Statistical methods were used by SRNL to develop the critical CU value for the ''go/no-go'' decision for these standards for each Optek unit. Since only one sludge simulant was available for this testing, the sensitivity of these results to other simulants and to actual sludge material is not known. However, limited testing with samples from the actual DWPF process (both SRAT product samples and SMECT samples) demonstrated that the use of the ''go/no-go'' criteria developed from the sludge simulant testing was conservative for these samples taken from Sludge Batch 7b (SB7b), the sludge batch currently being processed. While both of the Optek units performed very reliably during this testing, there were statistically significant differences (although small on a practical scale) between the two units. Thus, testing should be conducted on any new unit of this Optek model to qualify it before it is used to support the DWPF operation.

  7. EVALUATION OF A TURBIDITY METER FOR USE AT THE DEFENSE WASTE PROCESSING FACILITY

    SciTech Connect (OSTI)

    Mahannah, R.; Edwards, T.

    2013-06-04

    Savannah River Remediation’s (SRR’s) Defense Waste Processing Facility (DWPF) Laboratory currently tests for sludge carry-over into the Recycle Collection Tank (RCT) by evaluating the iron concentration in the Slurry Mix Evaporator Condensate Tank (SMECT) and relating this iron concentration to the amount of sludge solids present. A new method was proposed for detecting the amount of sludge in the SMECT that involves the use of an Optek turbidity sensor. Waste Services Laboratory (WSL) personnel conducted testing on two of these units following a test plan developed by Waste Solidification Engineering (WSE). Both Optek units (SN64217 and SN65164) use sensor model AF16-N and signal converter model series C4000. The sensor body of each unit was modified to hold a standard DWPF 12 cc sample vial, also known as a “peanut” vial. The purpose of this testing was to evaluate the use of this model of turbidity sensor, or meter, to provide a measurement of the sludge solids present in the SMECT based upon samples from that tank. During discussions of the results from this study by WSE, WSL, and Savannah River National Laboratory (SRNL) personnel, an upper limit on the acceptable level of solids in SMECT samples was set at 0.14 weight percent (wt%). A “go/no-go” decision criterion was to be developed for the critical turbidity response, which is expressed in concentration units (CUs), for each Optek unit based upon the 0.14 wt% solids value. An acceptable or a “go” decision for the SMECT should reflect the situation that there is an identified risk (e.g. 5%) for a CU response from the Optek unit to be less than the critical CU value when the solids content of the SMECT is actually 0.14 wt% or greater, while a “no-go” determination (i.e., an Optek CU response above the critical CU value, a conservative decision relative to risk) would lead to additional evaluations of the SMECT to better quantify the possible solids content of the tank. Subsequent to the issuance of the initial version of this report but under the scope of the original request for technical assistance, WSE asked for this report to be revised to include the “go/no-go” CU value corresponding to 0.28 wt% solids. It was this request that led to the preparation of Revision 1 of the report. The results for the 0.28 wt% solids value were developed following the same approach as that utilized for the 0.14 wt% solids value. A sludge simulant was used to develop standards for testing both Optek units and to determine the viability of a “go/no-go” CU response for each of the units. Statistical methods were used by SRNL to develop the critical CU value for the “go/no-go” decision for these standards for each Optek unit. Since only one sludge simulant was available for this testing, the sensitivity of these results to other simulants and to actual sludge material is not known. However, limited testing with samples from the actual DWPF process (both SRAT product samples and SMECT samples) demonstrated that the use of the “go/no-go” criteria developed from the sludge simulant testing was conservative for these samples taken from the sludge batch, Sludge Batch 7b, being processed at the time of this testing. While both of the Optek units performed very reliably during this testing, there were statistically significant differences (although small on a practical scale) between the two units. Thus, testing should be conducted on any new unit of this Optek model to qualify it before it is used to support the DWPF operation.

  8. An Investigation of the Utilization of Smart Meter Data to Adapt Overcurrent Protection for Radial Distribution Systems with a High Penetration of Distributed Generation 

    E-Print Network [OSTI]

    Douglin, Richard Henry

    2012-07-16

    The future of electric power distribution systems (DSs) is one that incorporates extensive amounts of advanced metering, distribution automation, and distributed generation technologies. Most DSs were designed to be radial ...

  9. Use of Metering for Facility and Whole Building Energy Analysis by the U.S. Depratment of Energy Federal Energy Management Program 

    E-Print Network [OSTI]

    Devine, K. D.; Mazzucchi, R. P.

    1989-01-01

    This paper details how the U.S. Department of Energy, Federal Energy Management Program (FEMP) is applying metering technology to conduct empirically based analyses o f energy use by federal agencies. Continuing developments in sensors, data...

  10. Technology needs for environmental restoration remedial action

    SciTech Connect (OSTI)

    Watson, J.S.

    1992-11-01

    This report summarizes the current view of the most important technology needs for the US Department of Energy (DOE) facilities operated by Martin Marietta Energy Systems, Inc. These facilities are the Oak Ridge National Laboratory, the Oak Ridge K-25 Site, the Oak Ridge Y-12 Plant, the Paducah Gaseous Diffusion Plant, and the Portsmouth Gaseous Diffusion Plant. The sources of information used in this assessment were a survey of selected representatives of the Environmental Restoration (ER) programs at each facility, results from a questionnaire distributed by Geotech CWM, Inc., for DOE, and associated discussions with individuals from each facility. This is not a final assessment, but a brief look at an ongoing assessment; the needs will change as the plans for restoration change and, it is hoped, as some technical problems are solved through successful development programs.

  11. Guidance document for groundwater protection needs assessments

    SciTech Connect (OSTI)

    Cobb, R.P.; Berg, R.C.; Wehrmann, H.A.

    1995-01-01

    The purpose of this document is to serve as a guidebook for conducting Groundwater Protection Needs Assessments (GPNA). The intent of a GPNA is to provide a comprehensive evaluation of the groundwater protection measures necessary in order to assure a long-term supply of potable water that is not highly vulnerable to contamination. The Illinois Environmental Protection Agency (IEPA), the Illinois State Geological Survey (ISGS) and the Illinois State Water Survey (ISWS) have developed the approach discussed for undertaking of GPNA.

  12. Research needs to address ASR challenges 

    E-Print Network [OSTI]

    Wythe, Kathy

    2008-01-01

    and regulatory needs. These recom- mendations along with the full report may be read at http://www.nap.edu/catalog. php?record_id=12057. One overall recommendation of the NRC committee is the creation by water agencies of ?an independent advisory panel..., the National Research Council (NRC) convened a Committee on Sustainable Underground Storage of Recoverable Water to evaluate past experiences with ASR, or what the committee called managed underground storage (MUS) of recoverable water. Another committee...

  13. Information needs for risk management/communication

    SciTech Connect (OSTI)

    Bennett, D.A.

    1990-12-31

    The hazardous waste cleanup program under the Comprehensive Environmental Response, Compensation, and Liability Act (Superfund) is delegated to the ten Regions of the US Environmental Protection Agency (EPA) and has, to date, identified more than 33,000 sites for consideration. The size and complexity of the program places great demands on those who would provide information to achieve national consistency in application of risk assessment while meeting site-specific needs for risk management and risk communication.

  14. The Need for Essential Consumer Protections

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankADVANCEDInstallers/ContractorsPhotovoltaicsState of Pennsylvania U.S.The6, 2015Need for Essential

  15. Phoenix Water ServicesPhoenix Water Services We need more power!We need more power!

    E-Print Network [OSTI]

    Scott, Christopher

    Phoenix Water ServicesPhoenix Water Services We need more power!We need more power! #12;Stolen from Acre Foot of WaterkWh per Acre Foot of Water EPRI (2000), Water Desal Task Force (2003) #12;PhoenixPhoenix TreatmentWater Treatment PlantPlant #12;Phoenix New Water PlantPhoenix New Water Plant Power Requirement

  16. Quality characteristics of vacuum-packaged beef as affected by postmortem chill, storage temperature and storage interval 

    E-Print Network [OSTI]

    Beebe, Sammy Denzil

    1975-01-01

    QUALITY CHARACTERISTICS OF VACUUM-PACKAGED BEEF AS AFFECTED BY POSTMORTEM CHILL, STORAGE TEMPERATURE AND STORAGE INTERVAL A Thesis by SAMMY DENZIL BEEBE Submitted to the Graduate College of Texas A1IM University in partial fulfillment... of the requirement for the deoree of MASTER OF SCIENCE December 1975 Major Subject: Animal Science QUALITY CHARACTERISTICS OF VACUUM-PACKAGED BEEF AS AFFECTED BY POSTMORTEM CHILL, STORAGE TEMPERATURE AND STORAGE INTERVAL A Thesis by SAMMY DENZIL BEEBE...

  17. Needs assessment activity report. Revision 1

    SciTech Connect (OSTI)

    1994-11-01

    As part of a Transportation Management Division task (TMD), the Packaging Programs and Testing Group within Westinghouse Hanford Company (WHC) has assessed the packaging needs of some of the mid- and small-sized US Department of Energy (DOE) sites by visiting them and meeting with their transportation and packaging personnel. To date, ten DOE facilities have been visited. As a result, these sites have been informed of some of the packaging activities that TMD has sponsored and is sponsoring, have been appraised of possible upcoming changes to transportation regulations, have discussed their short-term packaging needs, and have shared unique packaging they have developed which may be of use to other DOE facilities. Program successes include developing a questionnaire that discusses the potential impact of US Department of Transportation (DOT) Docket HM-169A, Transportation Regulations; Compatibility with Regulations of the International Atomic Energy Agency; Notice of Proposed Rule (DOT 1989), discovery of a need for a reusable Type A liquid sample packaging and starting its development within another TMD task, coordinating resources between Fermi Laboratory and Argonne National Laboratory, and widening the distribution of WHC-EP-0558, Test and Evaluation Document for DOT Specification 7A Type A Packaging (WHC 1994).

  18. Advanced materials: Information and analysis needs

    SciTech Connect (OSTI)

    Curlee, T.R.; Das, S.; Lee, R.; Trumble, D.

    1990-09-01

    This report presents the findings of a study to identify the types of information and analysis that are needed for advanced materials. The project was sponsored by the US Bureau of Mines (BOM). It includes a conceptual description of information needs for advanced materials and the development and implementation of a questionnaire on the same subject. This report identifies twelve fundamental differences between advanced and traditional materials and discusses the implications of these differences for data and analysis needs. Advanced and traditional materials differ significantly in terms of physical and chemical properties. Advanced material properties can be customized more easily. The production of advanced materials may differ from traditional materials in terms of inputs, the importance of by-products, the importance of different processing steps (especially fabrication), and scale economies. The potential for change in advanced materials characteristics and markets is greater and is derived from the marriage of radically different materials and processes. In addition to the conceptual study, a questionnaire was developed and implemented to assess the opinions of people who are likely users of BOM information on advanced materials. The results of the questionnaire, which was sent to about 1000 people, generally confirm the propositions set forth in the conceptual part of the study. The results also provide data on the categories of advanced materials and the types of information that are of greatest interest to potential users. 32 refs., 1 fig., 12 tabs.

  19. YOUR DESIGN PROBABLY NEEDS MORE VDUs

    SciTech Connect (OSTI)

    OHARA, J.; BROWN, W.; LEWIS, P.; PERSENSKY, J.

    2001-10-08

    The most frequent complaint of operators in modern computer-based control rooms is that there just are not enough video display units (VDUs). In this paper we examine the basis for this concern and try to understand the technical and historical reasons for this complaint, and its implications for the design of complex human-machine systems, including the number of VDUs in the control room. The overall aim of our work is to develop human factors guidance for the review of computer-based and modernized control rooms in nuclear power plants. As part of these efforts we have conducted literature reviews and studies using both simulators and actual systems in a broad range of industries, including process control, aerospace, medical, and others. Our findings reflect the general complaint of operators across all these industries: there just are not enough VDUs in the control room. We conclude that there are three primary reasons for this complaint. First, as part of a workload management strategy, operators frequently avoid interface management tasks and do not access all the information available, preferring instead to use a fixed set of familiar displays that provide much (but not all) of the information needed. Performance thereby becomes data limited and operators complain that they do not have a sufficient number of VDUs to set up in the early phases of a high-workload period so they can get all the information they need. Second, display designs are typically not designed with operator tasks in mind. The most common method of representing information is by functions and systems. Since tasks typically cut across many systems, operators need many displays. Thus, to make task performance easier operators need additional VDUs. Finally, there is a differing ''concept of operations'' between designers and operators. Modern computer-based control rooms are designed with vast amounts of data, available through hundreds of displays, viewed by the operator through a limited number of display devices. Designers expect that operators will use the flexibility of the computer-based interfaces to configure them in such a way that they are ideally tailored to the unique demands of the current situation. However, operators usually do not do that and instead configure the interfaces in a spatially dedicated way. Thus, while the number of VDUs may seem reasonable to the designer, it is not to the operator who is attempting to minimize the interface management aspects of workload. The implications of these findings for design are discussed in terms of the need for a method for determining the number of displays, task-relevant displays, data-dense displays, and enhanced interface management design and training.

  20. Insights from Smart Meters: Ramp Up, Dependability, and Short-Term Persistence of Savings from Home Energy Reports

    Broader source: Energy.gov [DOE]

    In this report, we use smart meter data to analyze the ramp-up, dependability, and short-term persistence of savings in one type of BB program: Home Energy Reports (HERs). In these programs, reports are mailed to households on a monthly, bi-monthly, or even quarterly basis. The reports provide energy tips and information about how a household's energy use compares to its neighbors. HERs typically obtain 1% to 3% annual electricity savings; several studies report that savings from mature HERs persist over multiple years while the programs are running (and decay after the reports are discontinued).

  1. Sandia Energy - Energy Supply Transformation Needed

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust, High-Throughput Analysis ofSample SULIColin HumphreysDETLECSupply Transformation Needed

  2. Transportation needs assessment: Emergency response section

    SciTech Connect (OSTI)

    1989-05-01

    The transportation impacts of moving high level nuclear waste (HLNW) to a repository at Yucca Mountain in Nevada are of concern to the residents of the State as well as to the residents of other states through which the nuclear wastes might be transported. The projected volume of the waste suggests that shipments will occur on a daily basis for some period of time. This will increase the risk of accidents, including a catastrophic incident. Furthermore, as the likelihood of repository construction and operation and waste shipments increase, so will the attention given by the national media. This document is not to be construed as a willingness to accept the HLNW repository on the part of the State. Rather it is an initial step in ensuring that the safety and well-being of Nevada residents and visitors and the State`s economy will be adequately addressed in federal decision-making pertaining to the transportation of HLNW into and across Nevada for disposal in the proposed repository. The Preferred Transportation System Needs Assessment identifies critical system design elements and technical and social issues that must be considered in conducting a comprehensive transportation impact analysis. Development of the needs assessment and the impact analysis is especially complex because of the absence of information and experience with shipping HLNW and because of the ``low probability, high consequence`` aspect of the transportation risk.

  3. Identification of environmental RD D needs

    SciTech Connect (OSTI)

    Crocker, M.E.; Madden, M.P.; Porter, R.

    1991-09-01

    The objective of this project was to identify needs for environmental research development and demonstration projects that have the potential to improve the performance of oil and gas exploration, drilling, and production technologies for maximum recovery of domestic petroleum resources under optimal environmental and economic conditions. To achieve this objective several areas of work were addressed. The first task was to compile as much related data as possible. This was achieved by literature searches of a number of petroleum-related data bases. After acquiring sufficient background on environmental and economical areas that should be expanded, experts who are knowledgeable in these areas were contacted to further define specific issues. More than 33 identified areas were submitted to an in-house panel at NIPER to assure that the final environmental research demonstration and development needs that were selected to be expanded were unbiased and worthy of additional work. Specific subjects that were expanded include: (1) the Mechanical Integrity Testing of Injection Wells by Oxygen-Activation Log, (2) A More Rapid or Alternative Bioassay Test, (3) An Environmentally Safe Drilling Fluid Additive, (4) Bioremediation of Waste Pits, (5) A More Efficient Technology Transfer, (6) A Comprehensive Work Management Protocol, and (7) A Pollution Potential Prioritization Protocol For Abandoned Wells. 6 refs., 3 figs., 4 tabs.

  4. Low-Load Space Conditioning Needs Assessment

    SciTech Connect (OSTI)

    Puttagunta, Srikanth

    2015-05-01

    With limited low-load options in the HVAC market, many new-construction housing units are being fitted with oversized equipment - thus facing penalties in system efficiency, comfort, and cost. To bridge the gap between currently available HVAC equipment and the rising demand for low-load HVAC equipment in the marketplace, HVAC equipment manufacturers need to be fully aware of multifamily buildings and single-family homes market needs. Over the past decade, Steven Winter Associates, Inc. (SWA) has provided certification and consulting services on hundreds of housing projects and has accrued a large pool of data. CARB compiled and analyzed these data to see what the thermal load ranges are in various multifamily apartments and attached single-family home types (duplex and townhouse). In total, design loads from 941 dwellings from SWA's recent multifamily and attached single-family work across the Northeast and Mid-Atlantic were analyzed. Information on the dwelling characteristics, design loads, and the specifications of installed mechanical equipment were analyzed to determine any trends that exist within the dataset.

  5. La Grange, Texas Housing Needs Assessment 

    E-Print Network [OSTI]

    Byler, Scott; Cooper, John T.; Van Zandt, Shannon; Masterson, Jaimie; Tedford, Emily

    2015-01-01

    . Housing Needs Assessment 2015 8 Section I Figure 1.1 shows the population pyramid for the City in 2010. When a City is experiencing growth, it is normal for the lower age groups to be largest, with group sizes becoming smaller as they move higher. La... Total Housing Units 466 3,084 3,441,117 less than 20% 55.8% 52.5% 41.5% 20 to 24.9% 0% 12% 16.7% 25 to 29.9% 14.8% 7.6% 11.4% 30 to 34.9% 3.6% 7.5% 7.6% 35% or more 25.8% 20.5% 22.9% Under 30% 70.6% 72.1% 69.6% Owner Occupied without a Mortgage Total...

  6. Housing Needs and Policy Issues in High Tech Economies

    E-Print Network [OSTI]

    Nelson, Kathryn P.

    2001-01-01

    NEEDS AND POLICY ISSUES IN HIGH TECH ECONOMIES By Kathryn P.Needs and Policy Issues in High Tech Economies Kathryn P.Needs and Policy Issues in High Tech Economies Who is left

  7. Research and Development Needs for Wind Systems Utilizing Controllable...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Research and Development Needs for Wind Systems Utilizing Controllable Grid Simulators and Full Scale Hardware in the Loop Testing Research and Development Needs for Wind Systems...

  8. Computational Needs for the Next Generation Electric Grid Proceedings

    E-Print Network [OSTI]

    Birman, Kenneth

    2012-01-01

    applied  to  power  systems,  Computational Needs for Next Electric  power  system  computational  needs  appropriate converting a powerful computational system into a powerful 

  9. Summary of Needs and Opportunities from the 2011 Residential...

    Energy Savers [EERE]

    Needs and Opportunities from the 2011 Residential Energy Efficiency Stakeholders Meeting: Atlanta, Georgia -- March 16-18, 2011 Summary of Needs and Opportunities from the 2011...

  10. Electric Power Industry Needs for Grid-Scale Storage Applications...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Electric Power Industry Needs for Grid-Scale Storage Applications Electric Power Industry Needs for Grid-Scale Storage Applications Stationary energy storage technologies will...

  11. Code Gaps and Future Research Needs of Combustion Safety: Building...

    Energy Savers [EERE]

    Code Gaps and Future Research Needs of Combustion Safety: Building America Expert Meeting Update Code Gaps and Future Research Needs of Combustion Safety: Building America Expert...

  12. A Workshop to Identify Research Needs and Impacts in Predictive...

    Office of Environmental Management (EM)

    to Identify Research Needs and Impacts in Predictive Simulation for Internal Combustion Engines (PreSICE) A Workshop to Identify Research Needs and Impacts in Predictive...

  13. Biodiesel ASTM Update and Future Technical Needs | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Biodiesel ASTM Update and Future Technical Needs Biodiesel ASTM Update and Future Technical Needs Latest ASTM fuel specifications on biodiesel blends are summarized as well as...

  14. Immediate Need for Science and Technology Policy Fellowships...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Immediate Need for Science and Technology Policy Fellowships in the Geothermal Technologies Office Immediate Need for Science and Technology Policy Fellowships in the Geothermal...

  15. Proceedings of the Computational Needs for the Next Generation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Computational Needs for the Next Generation Electric Grid Workshop, April 19-20, 2011 Proceedings of the Computational Needs for the Next Generation Electric Grid Workshop, April...

  16. Proceedings of the April 2011 Computational Needs for the Next...

    Energy Savers [EERE]

    Proceedings of the April 2011 Computational Needs for the Next Generation Electric Grid Workshop Available Proceedings of the April 2011 Computational Needs for the Next Generation...

  17. Research & Development Needs for Building-Integrated Solar Technologie...

    Office of Environmental Management (EM)

    Needs for Building-Integrated Solar Technologies Research & Development Needs for Building-Integrated Solar Technologies The Building Technologies Office (BTO) has identified...

  18. Climate Information Needs for Financial Decision Making

    SciTech Connect (OSTI)

    Higgins, Paul

    2013-11-19

    Climate Information Needs for Financial Decision Making (Final Report) This Department of Energy workshop award (grant #DE-SC0008480) provided primary support for the American Meteorological Society’s study on climate information needs for financial decision making. The goal of this study was to help advance societal decision making by examining the implications of climate variability and change on near-term financial investments. We explored four key topics: 1) the conditions and criteria that influence returns on investment of major financial decisions, 2) the climate sensitivity of financial decisions, 3) climate information needs of financial decision makers, and 4) potential new mechanisms to promote collaboration between scientists and financial decision makers. Better understanding of these four topics will help scientists provide the most useful information and enable financial decision makers to use scientific information most effectively. As a result, this study will enable leaders in business and government to make well-informed choices that help maximize long-term economic success and social wellbeing in the United States The outcomes of the study include a workshop, which brought together leaders from the scientific and financial decision making communities, a publication of the study report, and a public briefing of the results to the policy community. In addition, we will present the results to the scientific community at the AMS Annual Meeting in February, 2014. The study results were covered well by the media including Bloomberg News and E&E News. Upon request, we also briefed the Office of Science Technology Policy (OSTP) and the Council on Environmental Quality (CEQ) on the outcomes. We presented the results to the policy community through a public briefing in December on Capitol Hill. The full report is publicly available at www.ametsoc.org/cin. Summary of Key Findings The United States invests roughly $1.5 trillion U.S. dollars (USD) in capital assets each year across the public and private sectors (Orszag 2008; United States Census Bureau 2013). Extreme weather events create and exacerbate risks to these financial investments by contributing to: • Direct physical impacts on the investments themselves • Degradation of critical supporting infrastructure • Changes in the availability of key natural resources • Changes to workforce availability or capacity • Changes in the customer base • Supply chain disruptions • Legal liability • Shifts in the regulatory environment • Reductions in credit ratings Even small changes in weather can impact operations in critical economic sectors. As a result, maximizing returns on financial investments depends on accurately understanding and effectively accounting for these risks. Climate variability and change can either exacerbate existing risks or cause new sources of risk to emerge. Managing these risks most effectively will depend on scientific advances and increases in the capacity of financial decision makers to use the scientific knowledge that results. Barriers to using climate information must also be overcome. This study proposes three predefined levels of certainty for communicating about weather and climate risks: 1) possible (i.e., unknown likelihood or less than 50% chance of occurrence), 2) probable (greater than 50% chance of occurrence), and 3) effectively certain (at least 95% chance of occurrence). For example, it is effectively certain that a change in climate will alter weather patterns. It is probable that climate warming will cause increases in the intensity of some extreme events. It is possible that climate change will cause major and widespread disruptions to key planetary life-support services. Key recommendations of this study: 1) Identify climate-related risks and opportunities for financial decision making. 2) Create a framework to translate scientific information in clear and actionable terms for financial decision makers. 3) Analyze existing climate assessments and translate projected impacts into possible, probable,

  19. Towards Combining Probabilistic, Interval, Fuzzy Uncertainty, and Constraints: An Example Using the Inverse Problem in Geophysics

    E-Print Network [OSTI]

    Kreinovich, Vladik

    century. The result was the discovery of many large relatively easy to locate resources such as the oil: A Brief Descrip- tion In evaluations of natural resources and in the search for natural resources from the Earth, such as fossil fuels (oil, coal, natural gas), minerals, and water. Our need

  20. Towards Combining Probabilistic, Interval, Fuzzy Uncertainty, and Constraints: An Example Using the Inverse Problem in Geophysics

    E-Print Network [OSTI]

    Kreinovich, Vladik

    century. The result was the discovery of many large relatively easy to locate resources such as the oil: A Brief Descrip­ tion In evaluations of natural resources and in the search for natural resources from the Earth, such as fossil fuels (oil, coal, natural gas), minerals, and water. Our need