Powered by Deep Web Technologies
Note: This page contains sample records for the topic "interrupting switch advanced" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Vacuum interrupters and thyratrons as opening switches  

DOE Green Energy (OSTI)

The clear advantages of inductive storage for large scale energy storage applications are creating an increasing interest in the research and development of the opening switches required. Opening switches for single-shot inductive transfers have received considerable attention and are fairly well advanced. The problem addressed by this workshop of high power opening switches for high repetition rate applications is much more severe, however, and may well require a major research and development effort. Two candidates for such an opening switch, the triggered vacuum interrupter and the magnetically quenched thyratron, are discussed. By electrically retriggering the discharge in the vacuum interrupter between pulses, the dependence on mechanical motion is eliminated. This should enable repetition rate operation at 10 to 15 kHz while still maintaining the vacuum interrupter's proven interrupting performance of tens of kiloamps at tens of kilovolts. The magnetically quenched thyratron, on the other hand, uses a cross magnetic field to raise the switch impedance by decreasing the electron mobility and driving the discharge into an arc chute wall where it is quenched. Successful interruptions of 1 kA at 15 kV and 100 A at 50 kV after conduction for 10 ..mu..s have been demonstrated by previous researchers. Work at Los Alamos is directed toward understanding the basic mechanisms involved and increasing the switch ratings, particularly the conduction time.

Honig, E.M.

1981-01-01T23:59:59.000Z

2

Definition: Advanced Interrupting Switch | Open Energy Information  

Open Energy Info (EERE)

sectionalizing to isolate faults.1 Related Terms fault References https:www.smartgrid.govcategorytechnologyadvancedinterruptingswitch C LikeLike UnlikeLike You...

3

Analysis of switching surges generated by current interruption in an energy-storage coil  

DOE Green Energy (OSTI)

The paper presents an analysis of the transient voltages which are generated when the current in a large magnetic energy storage coil is interrupted by a dc vacuum circuit breaker. The effect of the various parameters in the circuit on the transient voltage is discussed. The self inductance of the dump resistor must be minimized to control the generated transient. Contrary to general belief, a capacitor across the coil is not an effective surge suppressor. In fact, the capacitor may excite oscillations of higher magnitude. However, a capacitor, in addition to a surge suppressor, may be used to modify the frequency components of the transient voltage so that these frequency components are not coincident with the natural frequencies of the coil. Otherwise, resonant oscillations inside the coil may attain damaging magnitudes. The capacitor would also reduce the steepness of the wavefront of the transient across the coil, thus reducing the nonlinear voltage distribution inside the coil.

Chowdhuri, P.

1981-01-01T23:59:59.000Z

4

Magnetic Switching under Pressure | Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

Revealing the Secrets of Chemical Bath Deposition Revealing the Secrets of Chemical Bath Deposition DNA Repair Protein Caught in the Act of Molecular Theft Velcro for Nanoparticles A Molecular Fossil Ultrafast Imaging of Electron Waves in Graphene Science Highlights Archives: 2013 | 2012 | 2011 | 2010 2009 | 2008 | 2007 | 2006 2005 | 2004 | 2003 | 2002 2001 | 2000 | 1998 | Subscribe to APS Science Highlights rss feed Magnetic Switching under Pressure DECEMBER 2, 2010 Bookmark and Share A schematic representation of the pressure-induced magnetic switching effect. The colored images highlight the direction of the magnetic orbital (grey plane) for the copper centers (green balls: copper, blue: nitrogen, red: oxygen/water, yellow: fluoride). A material's properties are a critical factor in the way that material

5

Interruptible iterators  

E-Print Network (OSTI)

This paper introduces interruptible iterators, a language feature that makes expressive iteration abstractions much easier to implement. Iteration abstractions are valuable for software design, as shown by their frequent use in well-designed data structure libraries such as the Java Collections Framework. While Java iterators support iteration abstraction well from the standpoint of client code, they are awkward to implement correctly and efficiently, especially if the iterator needs to support imperative update of the underlying collection, such as removing the current element. Some languages, such as CLU and C # 2.0, support iteration through a limited coroutine mechanism, but these mechanisms do not support imperative updates. Interruptible iterators are more powerful coroutines in which the loop body is able to interrupt the iterator with requests to perform updates. Interrupts are similar to exceptions, but propagate differently and have resumption semantics. Interruptible iterators have been implemented as part of the JMatch programming language, an extended version of Java. A JMatch reimplementation of the Java Collections Framework shows that implementations can be made substantially shorter and simpler; performance results show that this language mechanism can also be implemented efficiently.

Jed Liu; Aaron Kimball; Andrew C. Myers

2006-01-01T23:59:59.000Z

6

A Soft-Switching Inverter for High-Temperature Advanced Hybrid Electric Vehicle Traction Motor Drives  

Science Conference Proceedings (OSTI)

The state-of-the-art hybrid electric vehicles (HEVs) require the inverter cooling system to have a separate loop to avoid power semiconductor junction over temperatures because the engine coolant temperature of 105?C does not allow for much temperature rise in silicon devices. The proposed work is to develop an advanced soft-switching inverter that will eliminate the device switching loss and cut down the power loss so that the inverter can operate at high-temperature conditions while operating at high switching frequencies with small current ripple in low inductance based permanent magnet motors. The proposed tasks also include high-temperature packaging and thermal modeling and simulation to ensure the packaged module can operate at the desired temperature. The developed module will be integrated with the motor and vehicle controller for dynamometer and in-vehicle testing to prove its superiority. This report will describe the detailed technical design of the soft-switching inverters and their test results. The experiments were conducted both in module level for the module conduction and switching characteristics and in inverter level for its efficiency under inductive and dynamometer load conditions. The performance will be compared with the DOE original specification.

None, None

2012-01-31T23:59:59.000Z

7

Hybrid high direct current circuit interrupter  

DOE Patents (OSTI)

A device and a method are disclosed for interrupting very high direct currents (greater than 100,000 amperes) and simultaneously blocking high voltages (greater than 600 volts). The device utilizes a mechanical switch to carry very high currents continuously with low loss and a silicon controlled rectifier (SCR) to bypass the current around the mechanical switch while its contacts are separating. A commutation circuit, connected in parallel with the SCR, turns off the SCR by utilizing a resonant circuit to divert the SCR current after the switch opens. 7 figs.

Rockot, J.H.; Mikesell, H.E.; Jha, K.N.

1998-08-11T23:59:59.000Z

8

Hybrid high direct current circuit interrupter  

DOE Patents (OSTI)

A device and a method for interrupting very high direct currents (greater than 100,000 amperes) and simultaneously blocking high voltages (greater than 600 volts). The device utilizes a mechanical switch to carry very high currents continuously with low loss and a silicon controlled rectifier (SCR) to bypass the current around the mechanical switch while its contacts are separating. A commutation circuit, connected in parallel with the SCR, turns off the SCR by utilizing a resonant circuit to divert the SCR current after the switch opens.

Rockot, J.H.; Mikesell, H.E.; Jha, K.N.

1996-12-31T23:59:59.000Z

9

Definition: Interruptible Load Or Interruptible Demand | Open Energy  

Open Energy Info (EERE)

Interruptible Load Or Interruptible Demand Interruptible Load Or Interruptible Demand Jump to: navigation, search Dictionary.png Interruptible Load Or Interruptible Demand Demand that the end-use customer makes available to its Load-Serving Entity via contract or agreement for curtailment.[1] View on Wikipedia Wikipedia Definition View on Reegle Reegle Definition No reegle definition available. Also Known As non-firm service Related Terms transmission lines, electricity generation, transmission line, firm transmission service, smart grid References ↑ Glossary of Terms Used in Reliability Standards An inli LikeLike UnlikeLike You like this.Sign Up to see what your friends like. ne Glossary Definition Retrieved from "http://en.openei.org/w/index.php?title=Definition:Interruptible_Load_Or_Interruptible_Demand&oldid=502615"

10

Ultrananocrystalline diamond films with optimized dielectric properties for advanced RF MEMS capacitive switches  

DOE Patents (OSTI)

An efficient deposition process is provided for fabricating reliable RF MEMS capacitive switches with multilayer ultrananocrystalline (UNCD) films for more rapid recovery, charging and discharging that is effective for more than a billion cycles of operation. Significantly, the deposition process is compatible for integration with CMOS electronics and thereby can provide monolithically integrated RF MEMS capacitive switches for use with CMOS electronic devices, such as for insertion into phase array antennas for radars and other RF communication systems.

Sumant, Anirudha V.; Auciello, Orlando H.; Mancini, Derrick C.

2013-01-15T23:59:59.000Z

11

Vacuum interrupters used for the interruption of high dc currents  

DOE Green Energy (OSTI)

Conventional ac vacuum interrupters are being used to interrupt currents in pulsed energy storage systems. They have been tested with dc currents of up to 37 kA. The limit to the current which can be successfully interrupted has been measured as a function of various parameters. Among these are (1) the size of the interrupter, (2) the magnitude of the counterpulse current, (3) the nature and flux rating of the saturable reactor used, and (4) the kind of ''snubber'' circuit used. Fragmentary data have also been collected on electrode erosion rates and on mechanical failure of the bellows. A description is given of the circuits used in these tests and of the results found for a representative selection of the commercially available domestic interrupters. More recently efforts have been made to increase the values found for the maximum interruptible current. The techniques used have included connecting interrupters in parallel and operating them in an impressed axial magnetic field. The results of this work are discussed.

Warren, R.W.

1977-01-01T23:59:59.000Z

12

Watching a Glycine Riboswitch "Switch" | Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

Polyamorphism in a Metallic Glass Polyamorphism in a Metallic Glass Under Pressure, Vanadium Won't Turn Down the Volume New Nanoscale Engineering Breakthrough Points to Hydrogen-Powered Vehicles Patterning High-density Arrays of Nanospheres with Self Assembly Cells Forming Blood Vessels Send Their Copper to the Edge Science Highlights Archives: 2013 | 2012 | 2011 | 2010 2009 | 2008 | 2007 | 2006 2005 | 2004 | 2003 | 2002 2001 | 2000 | 1998 | Subscribe to APS Science Highlights rss feed Watching a Glycine Riboswitch "Switch" MARCH 28, 2007 Bookmark and Share Low-resolution 3-D reconstructions from SAXS measurements of a glycine binding riboswitch. Unfolded conformation in the absence of divalent counterions (blue), partially folded conformation in the presence of Mg2+ counterions (green), and fully folded conformation in the presence of Mg2+

13

Interruption Cost Estimate Calculator | Open Energy Information  

Open Energy Info (EERE)

Interruption Cost Estimate Calculator Interruption Cost Estimate Calculator Jump to: navigation, search Tool Summary Name: Interruption Cost Estimate (ICE) Calculator Agency/Company /Organization: Freeman, Sullivan & Co. Sector: Energy Focus Area: Grid Assessment and Integration, Energy Efficiency Resource Type: Online calculator, Software/modeling tools User Interface: Website Website: icecalculator.com/ Country: United States Cost: Free Northern America References: [1] Logo: Interruption Cost Estimate (ICE) Calculator This calculator is a tool designed for electric reliability planners at utilities, government organizations or other entities that are interested in estimating interruption costs and/or the benefits associated with reliability improvements. About The Interruption Cost Estimate (ICE) Calculator is an electric reliability

14

Avoiding and Managing Interruptions of Electric Service Under an Interruptible Contract or Tariff  

E-Print Network (OSTI)

Many large industrial consumers of electricity purchase power through special interruptible contracts or curtailable tariffs. Historically, the number of actual interruptions has been very small -many interruptible consumers have never been required to curtail their usage, and may be assuming that interruptions will never occur. This situation is largely due to the glut of electric generating capacity that exists today in the United States -generally speaking, there is enough generation available to serve all firm customers and all interruptible customers most of the time. However, this glut will likely disappear in the next few years, meaning that interruptible consumers will be required to suffer more interruptions in the near term. Industrials subject to these interruptions should work now toward mitigating the possibility of interruptions and planning their operations so that interruptions can be avoided or sustained with minimal impact. This paper describes methods available to avoid and manage interruptions.

Evans, G. W.

1995-04-01T23:59:59.000Z

15

Modeling Cathode Cooling Due to Power Interruption  

Science Conference Proceedings (OSTI)

Presentation Title, Modeling Cathode Cooling Due to Power Interruption ... Development and Application of SAMI's Low Voltage Energy-Saving Technology.

16

Testing and Implementation Progress on the Advanced Photon Source (APS) Linear Accelerator (Linac) High-Power S-band Switching System  

E-Print Network (OSTI)

An S-band linear accelerator is the source of particles and the front end of the Advanced Photon Source injector. In addition, it supports a low-energy undulator test line (LEUTL) and drives a free-electron laser (FEL). A waveguide-switching and distribution system is now under construction. The system configuration was revised to be consistent with the recent change to electron-only operation. There are now six modulator-klystron subsystems, two of which are being configured to act as hot spares for two S-band transmitters each, so that no single failure will prevent injector operation. The two subsystems are also used to support additional LEUTL capabilities and off-line testing. Design considerations for the waveguide-switching subsystem, topology selection, control and protection provisions, high-power test results, and current status are described

Grelick, A E; Berg, S; Dohan, D A; Goeppner, G A; Kang, Y W; Nassiri, A; Pasky, S; Pile, G; Smith, T; Stein, S J

2000-01-01T23:59:59.000Z

17

Interruptible load control for Taiwan Power Company  

SciTech Connect

Load management is the planning and implementation of those utility activities designed to influence customer use of electricity in ways that will produce desired changes in the utility's load shape. Interruptible load program is an option of load management which provides incentive rate to customers to interrupt or reduce the power demand during the system peak period or emergency condition. Therefore, how to design a proper incentive rate is the most important issue in implementing this program. This paper describes three alternatives designed for the interruptible load program, one of which was activated by Taiwan Power Company (Taipower) and some preliminary results were obtained. The effect of the interruptible load to the system peak demand reduction and the change of daily load curve for large industrial customers were analyzed. This paper estimates the avoided cost and design more appropriate incentive rate structure for interruptible load program.

Chen, C.S.; Leu, J.T. (Dept. of Electrical Engineering, National Sun Yat-Sen Univ., Kaohsiung (TW))

1990-05-01T23:59:59.000Z

18

Basic interrupt and command structures and applications  

SciTech Connect

Interrupt and command structures of a real-time system are described through specific examples. References to applications of a real-time system and programing development references are supplied. (auth)

Davies, R.C.

1974-01-01T23:59:59.000Z

19

When poll is better than interrupt  

Science Conference Proceedings (OSTI)

In a traditional block I/O path, the operating system completes virtually all I/Os asynchronously via interrupts. However, performing storage I/O with ultra-low latency devices using next-generation non-volatile memory, it can be shown that polling for ...

Jisoo Yang; Dave B. Minturn; Frank Hady

2012-02-01T23:59:59.000Z

20

Interruptions : using activity transitions to trigger proactive messages  

E-Print Network (OSTI)

The proliferation of mobile devices and their tendency to present information proactively has led to an increase in device generated interruptions experienced by users. These interruptions are not confined to a particular ...

Ho, Joyce (Joyce Carmen)

2004-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "interrupting switch advanced" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

ION SWITCH  

DOE Patents (OSTI)

An ion switch capable of transferring large magnitudes of power is described. An ion switch constructed in accordance with the invention includes a pair of spaced control electrodes disposed in a highly evacuated region for connection in a conventional circuit to control the passing of power therethrough. A controllable ionic conduction path is provided directiy between the control electrodes by a source unit to close the ion switch. Conventional power supply means are provided to trigger the source unit and control the magnitude, durations and pulse repetition rate of the aforementioned ionic conduction path.

Cook, B.

1959-02-10T23:59:59.000Z

22

Definition: Remote Service Switch | Open Energy Information  

Open Energy Info (EERE)

Service Switch Service Switch Jump to: navigation, search Dictionary.png Remote Service Switch A power switch within a smart meter that allows a utility to turn electrical service to a residential customer premise on or off. The switch is remotely operated from the utility using the AMI communications infrastructure. This feature is limited to residential meters providing 200 amp service or less, and allows a utility to quickly switch service without having to roll a service truck. This can be particularly useful for reducing service time and associated costs for establishing or terminating services for move-ins/move-outs, or for switching off service for safety reasons.[1] Related Terms advanced metering infrastructure References ↑ https://www.smartgrid.gov/category/technology/remote_service_switch

23

Solid-State Transfer Switch Technology and Application Update  

Science Conference Proceedings (OSTI)

Static transfer switches are used to switch between multiple voltage sources. Most legacy transfer switches typically use electromechanical devices, and some use thyristors. The advent of advanced high-voltage power semiconductors has allowed the realization of solid-state transfer switches (SSTS) that can seamlessly transfer between switches to provide high-quality uninterrupted power. Although a few legacy applications have been reported, SSTS could have an important role to play in alternating-current...

2010-12-31T23:59:59.000Z

24

Optical switch  

DOE Patents (OSTI)

An optical switching device (10) is provided whereby light from a first glass fiber (16) or a second glass fiber (14) may be selectively transmitted into a third glass fiber (18). Each glass fiber is provided with a focusing and collimating lens system (26, 28, 30). In one mode of operation, light from the first glass fiber (16) is reflected by a planar mirror (36) into the third glass fiber (18). In another mode of operation, light from the second glass fiber (14) passes directly into the third glass fiber (18). The planar mirror (36) is attached to a rotatable table (32) which is rotated to provide the optical switching.

Reedy, Robert P. (Livermore, CA)

1987-01-01T23:59:59.000Z

25

Optical switch  

DOE Patents (OSTI)

An optical switching device is provided whereby light from a first glass fiber or a second glass fiber may be selectively transmitted into a third glass fiber. Each glass fiber is provided with a focusing and collimating lens system. In one mode of operation, light from the first glass fiber is reflected by a planar mirror into the third glass fiber. In another mode of operation, light from the second glass fiber passes directly into the third glass fiber. The planar mirror is attached to a rotatable table which is rotated to provide the optical switching. 3 figs.

Reedy, R.P.

1987-11-10T23:59:59.000Z

26

Electric Power Interruption Cost Estimates for Individual Industries, Sectors, and U.S. Economy  

SciTech Connect

During the last 20 years, utilities and researchers have begun to understand the value in the collection and analysis of interruption cost data. The continued investigation of the monetary impact of power outages will facilitate the advancement of the analytical methods used to measure the costs and benefits from the perspective of the energy consumer. More in-depth analysis may be warranted because of the privatization and deregulation of power utilities, price instability in certain regions of the U.S. and the continued evolution of alternative auxiliary power systems.

Balducci, Patrick J.; Roop, Joseph M.; Schienbein, Lawrence A.; DeSteese, John G.; Weimar, Mark R.

2002-02-27T23:59:59.000Z

27

NREL: Awards and Honors - Current Interrupt Charging Algorithm for  

NLE Websites -- All DOE Office Websites (Extended Search)

Current Interrupt Charging Algorithm for Lead-Acid Batteries Current Interrupt Charging Algorithm for Lead-Acid Batteries Developers: Matthew A. Keyser, Ahmad A. Pesaran, and Mark M. Mihalic, National Renewable Energy Laboratory; Robert F. Nelson, Recombination Technologies; Elizabeth D. Sexton and John Olson, Optima Batteries, Inc. The current interrupt charging algorithm is a simple approach for recharging lead-acid batteries that extends the cycle life of the batteries by 300% to 400%. Lead-acid batteries used in electric vehicles have, up until now, lasted only about 150 to 200 deep discharge cycles. This is primarily because the batteries have been charged using a constant current and voltage. In contrast, NREL and its partners devised a new and much more efficient way to charge batteries. Their method involves applying a current

28

Fundamentals of interruption in vacuum. Eighth progress report  

SciTech Connect

In analyzing the behavior of a vacuum arc during interruption , a mathematical model has been set up to describe the events occurring in the interelectrode gap during interruption. The reliability of the results obtained using such a model depends on the accuracy of the initial assumptions made in setting up the model equations. Previous results obtained from the model analysis were compared to experimental data and it was found that there was a discrepancy close to current zero. To improve our model results some of the original model assumptions have been reconsidered in order to make the model more closely represent the physical reality of a vacuum arc.

Greenwood, A N; Childs, S E

1980-05-30T23:59:59.000Z

29

THYRATRON SWITCH  

DOE Patents (OSTI)

An arrangement for utilizing a thyratron as a noise free switch is described. It has been discovered that the voltage between plate and cathode of a thyratron will oscillate, producing voltage spikes, if the tube carries only a fraction of its maximum rated current. These voltage spikes can produce detrimental effects where the thyratron is used in critical timing circuits. To alleviate this problem the disclosed circuit provides a charged capacitor and a resistor in parallel with the tube and of such value that the maximum current will flow from the capacitor through the thyratron when it is triggered. During this time the signal current is conducted through the tube, before the thyratron voltage starts to oscillate, and the signal current output is free of noise spikes.

Creveling, R.; Bourgeois, N.A. Jr.

1959-04-21T23:59:59.000Z

30

Barriers to Switching Accidents  

Science Conference Proceedings (OSTI)

The EPRI Switching Safety & Reliability Project Steering Committee sponsored development of a self-study based training program for personnel who perform switching. Some of the earlier EPRI Switching Safety & Reliability research projects that focused on the causes of switching errors, highlighted a need to reduce the 'complacency' that tends to develop as switching activities are performed over and over again and become 'routine.' Most switching accidents or incidents involve personnel who were trained ...

2005-12-22T23:59:59.000Z

31

Comparison between an SCR and a vacuum interrupter system for repetitive opening  

DOE Green Energy (OSTI)

Two conceptual systems are analyzed for repetitive interruption of current from an inductive energy storage source. The interruption level for both systems is 25 kA at 25 kV. Factors such as interruption frequency, power dissipation, reliability, maintenance, developmental time, and cost are compared. The vacuum interrupter system is considered feasible for an interruption frequency of 25 Hz and a 10 to 20% duty cycle. The SCR system is considered feasible for an interruption frequency of up to 10 kHz.

Parsons, W.M.

1981-01-01T23:59:59.000Z

32

Radiation hard vacuum switch  

DOE Patents (OSTI)

A vacuum switch with an isolated trigger probe which is not directly connected to the switching electrodes. The vacuum switch within the plasmatron is triggered by plasma expansion initiated by the trigger probe which travels through an opening to reach the vacuum switch elements. The plasma arc created is directed by the opening to the space between the anode and cathode of the vacuum switch to cause conduction.

Boettcher, Gordon E. (Albuquerque, NM)

1990-01-01T23:59:59.000Z

33

Interruption of Tidal Disruption Flares By Supermassive Black Hole Binaries  

E-Print Network (OSTI)

Supermassive black hole binaries (SMBHBs) are products of galaxy mergers, and are important in testing Lambda cold dark matter cosmology and locating gravitational-wave-radiation sources. A unique electromagnetic signature of SMBHBs in galactic nuclei is essential in identifying the binaries in observations from the IR band through optical to X-ray. Recently, the flares in optical, UV, and X-ray caused by supermassive black holes (SMBHs) tidally disrupting nearby stars have been successfully used to observationally probe single SMBHs in normal galaxies. In this Letter, we investigate the accretion of the gaseous debris of a tidally disrupted star by a SMBHB. Using both stability analysis of three-body systems and numerical scattering experiments, we show that the accretion of stellar debris gas, which initially decays with time $\\propto t^{-5/3}$, would stop at a time $T_{\\rm tr} \\simeq \\eta T_{\\rm b}$. Here, $\\eta \\sim0.25$ and $T_{\\rm b}$ is the orbital period of the SMBHB. After a period of interruption, the accretion recurs discretely at time $T_{\\rm r} \\simeq \\xi T_b$, where $\\xi \\sim 1$. Both $\\eta$ and $\\xi$ sensitively depend on the orbital parameters of the tidally disrupted star at the tidal radius and the orbit eccentricity of SMBHB. The interrupted accretion of the stellar debris gas gives rise to an interrupted tidal flare, which could be used to identify SMBHBs in non-active galaxies in the upcoming transient surveys.

F. K. Liu; S. Li; Xian Chen

2009-10-21T23:59:59.000Z

34

Impact of Interruptible Natural Gas Service on Northeast Heating Oil Demand  

Reports and Publications (EIA)

Assesses the extent of interruptible natural gas contracts and their effect on heating oil demand in the Northeast.

Elizabeth E. Campbell

2001-02-01T23:59:59.000Z

35

Estimates of thermal fatigue due to beam interruptions for an ALMR-type ATW  

SciTech Connect

Thermal fatigue due to beam interruptions has been investigated in a sodium cooled ATW using the Advanced Liquid Metal mod B design as a basis for the subcritical source driven reactor. A k{sub eff} of 0.975 was used for the reactor. Temperature response in the primary coolant system was calculated, using the SASSYS- 1 code, for a drop in beam current from full power to zero in 1 microsecond.. Temperature differences were used to calculate thermal stresses. Fatigue curves from the American Society of Mechanical Engineers Boiler and Pressure Vessel Code were used to determine the number of cycles various components should be designed for, based on these thermal stresses.

Dunn, F. E.; Wade, D. C.

1999-11-12T23:59:59.000Z

36

Latching micro optical switch  

DOE Patents (OSTI)

An optical switch reliably maintains its on or off state even when subjected to environments where the switch is bumped or otherwise moved. In addition, the optical switch maintains its on or off state indefinitely without requiring external power. External power is used only to transition the switch from one state to the other. The optical switch is configured with a fixed optical fiber and a movable optical fiber. The movable optical fiber is guided by various actuators in conjunction with a latching mechanism that configure the switch in one position that corresponds to the on state and in another position that corresponds to the off state.

Garcia, Ernest J; Polosky, Marc A

2013-05-21T23:59:59.000Z

37

Switching between stabilizing controllers  

Science Conference Proceedings (OSTI)

This paper deals with the problem of switching between several linear time-invariant (LTI) controllers-all of them capable of stabilizing a specific LTI process-in such a way that the stability of the closed-loop system is guaranteed for any switching ... Keywords: Hybrid systems, Impulse system, Realization theory, Stability theory, Switched systems

JoO P. Hespanha; A.Stephen Morse

2002-11-01T23:59:59.000Z

38

Triggered plasma opening switch  

DOE Patents (OSTI)

A triggerable opening switch for a very high voltage and current pulse includes a transmission line extending from a source to a load and having an intermediate switch section including a plasma for conducting electrons between transmission line conductors and a magnetic field for breaking the plasma conduction path and magnetically insulating the electrons when it is desired to open the switch.

Mendel, Clifford W. (Albuquerque, NM)

1988-01-01T23:59:59.000Z

39

Triggered plasma opening switch  

DOE Patents (OSTI)

A triggerable opening switch for a very high voltage and current pulse includes a transmission line extending from a source to a load and having an intermediate switch section including a plasma for conducting electrons between transmission line conductors and a magnetic field for breaking the plasma conduction path and magnetically insulating the electrons when it is desired to open the switch.

Mendel, C.W.

1986-07-14T23:59:59.000Z

40

REMOTE CONTROLLED SWITCHING DEVICE  

DOE Patents (OSTI)

An electrical switching device which can be remotely controlled and in which one or more switches may be accurately operated at predetermined times or with predetermined intervening time intervals is described. The switching device consists essentially of a deck, a post projecting from the deck at right angles thereto, cam means mounted for rotation around said posts and a switch connected to said deck and actuated by said cam means. Means is provided for rotating the cam means at a constant speed and the switching apparatus is enclosed in a sealed container with external adjusting means and electrical connection elements.

Hobbs, J.C.

1959-02-01T23:59:59.000Z

Note: This page contains sample records for the topic "interrupting switch advanced" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Improved performance alternator with fully integrated Switched-Mode Rectifier  

E-Print Network (OSTI)

The use of Power Electronic circuits has helped to advance the technology of automotive alternators. The use of a Switched-Mode Rectifier (SMR) allows the alternator to run at a load-matched condition, optimizing power and ...

Mesa, Armando

2008-01-01T23:59:59.000Z

42

Electrocaloric devices based on thini-film heat switches  

SciTech Connect

We describe a new approach to refrigeration and electrical generation that exploits the attractive properties of thin films of electrocaloric materials. Layers of electrocaloric material coupled with thin-film heat switches can work as either refrigerators or electrical generators, depending on the phasing of the applied voltages and heat switching. With heat switches based on thin layers of liquid crystals, the efficiency of these thin-film heat engines can be at least as high as that of current thermoelectric devices. Advanced heat switches would enable thin-film heat engines to outperform conventional vaporcompression devices.

Epstein, Richard I [Los Alamos National Laboratory; Malloy, Kevin J [UNM

2009-01-01T23:59:59.000Z

43

Effective switching frequency multiplier inverter  

SciTech Connect

A switching frequency multiplier inverter for low inductance machines that uses parallel connection of switches and each switch is independently controlled according to a pulse width modulation scheme. The effective switching frequency is multiplied by the number of switches connected in parallel while each individual switch operates within its limit of switching frequency. This technique can also be used for other power converters such as DC/DC, AC/DC converters.

Su, Gui-Jia (Oak Ridge, TN); Peng, Fang Z. (Okemos, MI)

2007-08-07T23:59:59.000Z

44

Giving the Caller the Finger: Collaborative Responsibility for Cellphone Interruptions  

E-Print Network (OSTI)

We present a system in which a cell phone decides whether to ring by accepting votes from the others in a conversation with the called party. When a call comes in, the phone first determines who is in the conversation by using a decentralized network of autonomous body-worn sensor nodes. It then vibrates all participants' wireless finger rings. Although the alerted people do not know if it is their own cellphones that are about to interrupt, each of them has the possibility to veto the call anonymously by touching his/her finger ring. If no one vetoes, the phone rings. A user study showed significantly more vetoes during a collaborative group-focused setting than during a less group oriented setting. Our system is a component of a larger research project in context-aware computer-mediated call control.

Stefan Marti; Chris Schmandt

2005-01-01T23:59:59.000Z

45

Thermally actuated thermionic switch  

DOE Patents (OSTI)

A thermally actuated thermionic switch which responds to an increase of temperature by changing from a high impedance to a low impedance at a predictable temperature set point. The switch has a bistable operation mode switching only on temperature increases. The thermionic material may be a metal which is liquid at the desired operation temperature and held in matrix in a graphite block reservoir, and which changes state (ionizes, for example) so as to be electrically conductive at a desired temperature.

Barrus, D.M.; Shires, C.D.

1982-09-30T23:59:59.000Z

46

Latching Micro Optical Switch  

Sandia National Laboratories has developed a latching switch for optical fibers. One or more fibers are moved by an actuator between two positions, ...

47

Solid-State Transfer Switch Development  

Science Conference Proceedings (OSTI)

EPRI's multi-function Solid-State Switchgear System (4-S) will be a first-generation power-electronics replacement for conventional distribution switchgear. A key component of the system is the S-GTO based Static Transfer Switch (SSTS), an intelligent power-electronics device (IED) for Advanced Distribution Automation (ADA). This switch is a multi-functional, high performance, compact, high reliability cost-effective device. It utilizes the 2007 R&D100 Award winning S-GTO power-electronics devices, the l...

2009-12-10T23:59:59.000Z

48

Reflective HTS switch  

DOE Patents (OSTI)

A HTS switch includes a HTS conductor for providing a superconducting path for an electrical signal and an serpentine wire actuator for controllably heating a portion of the conductor sufficiently to cause that portion to have normal, and not superconducting, resistivity. Mass of the portion is reduced to decrease switching time.

Martens, Jon S. (Albuquerque, NM); Hietala, Vincent M. (Placitas, NM); Hohenwarter, Gert K. G. (Madison, WI)

1994-01-01T23:59:59.000Z

49

Reflective HTS switch  

DOE Patents (OSTI)

A HTS (High Temperature Superconductor) switch includes a HTS conductor for providing a superconducting path for an electrical signal and an serpentine wire actuator for controllably heating a portion of the conductor sufficiently to cause that portion to have normal, and not superconducting, resistivity. Mass of the portion is reduced to decrease switching time. 6 figs.

Martens, J.S.; Hietala, V.M.; Hohenwarter, G.K.G.

1994-09-27T23:59:59.000Z

50

Advanced Power Electronics Controllers for Substations  

Science Conference Proceedings (OSTI)

Substations located at various points in the power delivery system serve several purposes. In a broad sense, power substations are installations capable of interrupting or establishing electric circuits and changing the voltage level, frequency, or other characteristic of the electric energy flow. Solid-state power electronic switching devices are continuing to evolve and multi-megawatt solid-state power control systems are becoming increasingly applied in industrial electrical installations. Both have a...

2008-12-17T23:59:59.000Z

51

Study of Shifting without Driving Force Interrupt for Double Electric Motor HEV  

Science Conference Proceedings (OSTI)

For traditional gearbox, the engine power is cut off while shifting, which will interrupt the power of power-train, make velocity down, affect the acceleration of up gear and lower the vehicle dynamic. A double electric motor hybrid electric vehicle ... Keywords: Double Electric Motor HEV, Shifting Without Driving Force Interrupt (SWDFI), Integrated Power-train

Wang Jiaxue; Wang Qingnian; Wang Weihua; Zeng Xiaohua; Li Chuan

2009-10-01T23:59:59.000Z

52

Interruptible Power Rates and Their Role in Utility Distributed Resources Programs  

Science Conference Proceedings (OSTI)

On-site generators installed primarily for use during power outages represent a significant distributed resource (DR). These generators can be readily incorporated into power markets through existing "interruptible" rate structures where customers agree to reduce the electrical demand (on the utility) for specified periods. The extent to which utilities have adopted and/or encouraged interruptible rates is the subject of this report.

2003-02-20T23:59:59.000Z

53

Photoconductive switch package  

SciTech Connect

A photoconductive switch is formed of a substrate that has a central portion of SiC or other photoconductive material and an outer portion of cvd-diamond or other suitable material surrounding the central portion. Conducting electrodes are formed on opposed sides of the substrate, with the electrodes extending beyond the central portion and the edges of the electrodes lying over the outer portion. Thus any high electric fields produced at the edges of the electrodes lie outside of and do not affect the central portion, which is the active switching element. Light is transmitted through the outer portion to the central portion to actuate the switch.

Ca[rasp, George J

2013-10-22T23:59:59.000Z

54

Waveguide electrooptic switch arrays  

Science Conference Proceedings (OSTI)

A review is presented of electrooptic waveguide switch arrays with strong emphasis on those based on titanium-diffused lithium niobate waveguides. Crosspoint and array design considerations and performance are discussed as are waveguide technology limits. ...

R. C. Alferness

2006-09-01T23:59:59.000Z

55

New Switching Operator Training  

Science Conference Proceedings (OSTI)

This Technical Update report summarizes work done on a new project, launched in 2006, that is focused on the development of training materials for apprentice and new operators. The project is part of EPRI's Switching Safety and Reliability research.

2006-12-11T23:59:59.000Z

56

Plasmonic enhanced ultrafast switch.  

Science Conference Proceedings (OSTI)

Ultrafast electronic switches fabricated from defective material have been used for several decades in order to produce picosecond electrical transients and TeraHertz radiation. Due to the ultrashort recombination time in the photoconductor materials used, these switches are inefficient and are ultimately limited by the amount of optical power that can be applied to the switch before self-destruction. The goal of this work is to create ultrafast (sub-picosecond response) photoconductive switches on GaAs that are enhanced through plasmonic coupling structures. Here, the plasmonic coupler primarily plays the role of being a radiation condenser which will cause carriers to be generated adjacent to metallic electrodes where they can more efficiently be collected.

Subramania,Ganapathi Subramanian; Reno, John Louis; Passmore, Brandon Scott; Harris, Tom.; Shaner, Eric Arthur; Barrick, Todd A.

2009-09-01T23:59:59.000Z

57

An optical switch  

DOE Patents (OSTI)

The invention is a gas mixture for a diffuse discharge switch having an electron attaching gas wherein electron attachment is brought about by indirect excitation of molecules to long live states by exposure to laser light. 3 figs.

Christophorou, L.G.; Hunter, S.R.

1987-04-30T23:59:59.000Z

58

Test Switch: n  

U.S. Energy Information Administration (EIA)

Test Switch: n. struct; Message [empty string] StackTrace: java.lang.NullPointerException at java.util.Calendar.setTime(Calendar.java:1075) at coldfusion.util. ...

59

Cygnus PFL Switch Jitter  

Science Conference Proceedings (OSTI)

The Cygnus Dual Beam Radiographic Facility consists of two identical radiographic sources: Cygnus 1 and Cygnus 2. Each source has the following X-ray output: 1-mm diameter spot size, 4 rads at 1 m, 50-ns full-widthhalf-maximum. The diode pulse has the following electrical specifications: 2.25 MV, 60 kA, 60 ns. This Radiographic Facility is located in an underground tunnel test area at the Nevada Test Site (NTS). The sources were developed to produce high-resolution images on subcritical tests performed at NTS. Subcritical tests are single-shot, high-value events. For this application, it is desirable to maintain a high level of reproducibility in source output. The major components of the Cygnus machines are Marx generator, water-filled pulse forming line (PFL), water-filled coaxial transmission line, threecell inductive voltage adder, and rod-pinch diode. A primary source of fluctuation in Cygnus shot-to-shot performance may be jitter in breakdown of the main PFL switch, which is a self-break switch. The PFL switch breakdown time determines the peak PFL charging voltage, which ultimately affects the source X-ray spectrum and dose. Therefore, PFL switch jitter may contribute to shot-to-shot variation in these parameters, which are crucial to radiographic quality. In this paper we will present PFL switch jitter analysis for both Cygnus machines and present the correlation with dose. For this analysis, the PFL switch on each machine was maintained at a single gap setting, which has been used for the majority of shots at NTS. In addition the PFL switch performance for one larger switch gap setting will be examined.

C. Mitton, G. Corrow, M. Hansen, D. Henderson, et al.

2007-07-21T23:59:59.000Z

60

Cygnus Water Switch Jitter  

Science Conference Proceedings (OSTI)

The Cygnus Dual Beam Radiographic Facility consists of two identical radiographic sources - Cygnus 1 and Cygnus 2. Each source has the following x-ray output: 1-mm diameter spot size, 4 rad at 1 m, 50-ns Full Width Half Max. The diode pulse has the following electrical specifications: 2.25 MV, 60 kA, 60 ns. This Radiographic Facility is located in an underground tunnel test area at the Nevada Test Site (NTS). The sources were developed to produce high-resolution images on subcritical tests which are performed at NTS. Subcritical tests are single-shot, high-value events. For this application, it is desirable to maintain a high level of reproducibility in source output. The major components of the Cygnus machines are: Marx generator, water-filled pulseforming line (PFL), water-filled coaxial transmission line, three-cell inductive voltage adder, and rod-pinch diode. A primary source of fluctuation in Cygnus shot-to-shot performance is jitter in breakdown of the main PFL switch, which is a self-break switch. The PFL switch breakdown time determines the peak PFL charging voltage, which ultimately affects the diode pulse. Therefore, PFL switch jitter contributes to shot-to-shot variation in source endpoint energy and dose. In this paper we will present PFL switch jitter analysis for both Cygnus machines and give the correlation with diode performance. For this analysis the PFL switch on each machine was maintained at a single gap setting which has been used for the majority of shots at NTS. In addition to this analysis, PFL switch performance for different switch gap settings taken recently will be examined. Lastly, implications of source jitter for radiographic diagnosis of subcritical shots will be discussed.

Charles V. Mitton, George D. Corrow, Mark D. Hansen, David J. Henderson, et al.

2008-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "interrupting switch advanced" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Irreversible magnetic switch  

DOE Patents (OSTI)

This invention is comprised of an irreversible magnetic switch containing a ferromagnetic amorphous metal having a predetermined crystallization temperature in its inductor magnetic path. With the incorporation of such material, the magnetic properties after cooling from a high temperature excursion above its crystallization temperature are only a fraction of the original value. The difference is used to provide a safety feature in the magnetic switch.

Karnowsky, M.M.; Yost, F.G.

1991-12-31T23:59:59.000Z

62

Advanced Distribution Monitoring  

Science Conference Proceedings (OSTI)

Advanced Distribution Automation (ADA) is a concept for a fully controllable and flexible distribution system that will facilitate the exchange of electrical energy AND information between participants and system components. Advances in the monitoring of system parameters like voltages, currents and breaker/switch positions as well as environmental variables like temperature and wind speed will be required in order to fully implement ADA. This report presents background information on distribution monito...

2005-12-05T23:59:59.000Z

63

'Slow light' advance could speed optical computing, telecommunications  

NLE Websites -- All DOE Office Websites (Extended Search)

"Slow light" and specialized metamaterials 'Slow light' advance could speed optical computing, telecommunications Researchers have made the first demonstration of rapidly switching...

64

A radiation hard vacuum switch  

DOE Patents (OSTI)

A vacuum switch with an isolated trigger probe which is not directly connected to the switching electrodes. The vacuum switch within the plasmatron is triggered by plasma expansion initiated by the trigger probe which travels through an opening to reach the vacuum switch elements. The plasma arc created is directed by the opening to the space between the anode and cathode of the vacuum switch to cause conduction. 3 figs.

Boettcher, G.E.

1988-07-19T23:59:59.000Z

65

Energy losses in switches  

DOE Green Energy (OSTI)

The authors experiments show energy losses between 2 and 10 times that of the resistive time predictions. The experiments used hydrogen, helium, air, nitrogen, SF{sub 6} polyethylene, and water for the switching dielectric. Previously underestimated switch losses have caused over predicting the accelerator outputs. Accurate estimation of these losses is now necessary for new high-efficiency pulsed power devices where the switching losses constitute the major portion of the total energy loss. They found that the switch energy losses scale as (V{sub peak}I{sub peak}){sup 1.1846}. When using this scaling, the energy losses in any of the tested dielectrics are almost the same. This relationship is valid for several orders of magnitude and suggested a theoretical basis for these results. Currents up to .65 MA, with voltages to 3 MV were applied to various gaps during these experiments. The authors data and the developed theory indicates that the switch power loss continues for a much longer time than the resistive time, with peak power loss generally occurring at peak current in a ranging discharge instead of the early current time. All of the experiments were circuit code modeled after developing a new switch loss version based on the theory. The circuit code predicts switch energy loss and peak currents as a function of time. During analysis of the data they noticed slight constant offsets between the theory and data that depended on the dielectric. They modified the plasma conductivity for each tested dielectric to lessen this offset.

Martin, T.H.; Seamen, J.F.; Jobe, D.O.

1993-07-01T23:59:59.000Z

66

Understanding the Cost of Power Interruptions to U.S. Electricity Consumers  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Understanding the Cost of Power Interruptions to U.S. Electricity Understanding the Cost of Power Interruptions to U.S. Electricity Consumers Understanding the Cost of Power Interruptions to U.S. Electricity Consumers The massive electric power blackout in the northeastern United States and Canada on August 14-15, 2003 resulted in the U.S. electricity system being called "antiquated" and catalyzed discussions about modernizing the grid. Industry sources suggested that investments of $50 to $100 billion would be needed. This report seeks to quantify an important piece of information that has been missing from these discussions: how much do power interruptions and fluctuations in power quality (power-quality events) cost U.S. electricity consumers? Accurately estimating this cost will help assess the potential benefits of investments in improving the reliability

67

Switching power pulse system  

DOE Patents (OSTI)

A switching system for delivering pulses of power from a source to a load using a storage capacitor charged through a rectifier, and maintained charged to a reference voltage level by a transistor switch and voltage comparator. A thyristor is triggered to discharge the storage capacitor through a saturable reactor and fractional turn saturable transformer having a secondary to primary turn ratio N of n:l/n = n[sup 2]. The saturable reactor functions as a soaker'' while the thyristor reaches saturation, and then switches to a low impedance state. The saturable transformer functions as a switching transformer with high impedance while a load coupling capacitor charges, and then switches to a low impedance state to dump the charge of the storage capacitor into the load through the coupling capacitor. The transformer is comprised of a multilayer core having two secondary windings tightly wound and connected in parallel to add their output voltage and reduce output inductance, and a number of single turn windings connected in parallel at nodes for the primary winding, each single turn winding linking a different one of the layers of the multilayer core. The load may be comprised of a resistive beampipe for a linear particle accelerator and capacitance of a pulse forming network. To hold off discharge of the capacitance until it is fully charged, a saturable core is provided around the resistive beampipe to isolate the beampipe from the capacitance until it is fully charged. 5 figs.

Aaland, K.

1983-08-09T23:59:59.000Z

68

Multiple switch actuator  

DOE Patents (OSTI)

The present invention relates to switches and switch actuating devices to be operated for purposes of arming a bomb or other missile as it is dropped or released from an aircraft. The particular bomb or missile in which this invention is applied is one in which there is a plurality of circuits which are to be armed by the closing of switches upon dropping or releasing of the bomb. The operation of the switches to closed position is normally accomplished by means of a pull-out wire; that is, a wire which is withdrawn from the bomb or missile at the time of release of the bomb, one end of the wire being attached to the aircraft. The conditions to be met are that the arming switches must be positively and surely maintained in open position until the bomb is released and the arming action is effected. The action of the pull-out wire in achieving the arming action must be sure and positive with minimum danger of malfunctioning, jamming or binding.

Beyer, Edward T. (Rosamond, CA)

1976-01-06T23:59:59.000Z

69

Apparatus for and method of testing an electrical ground fault circuit interrupt device  

DOE Patents (OSTI)

An apparatus for testing a ground fault circuit interrupt device includes a processor, an input device connected to the processor for receiving input from an operator, a storage media connected to the processor for storing test data, an output device connected to the processor for outputting information corresponding to the test data to the operator, and a calibrated variable load circuit connected between the processor and the ground fault circuit interrupt device. The ground fault circuit interrupt device is configured to trip a corresponding circuit breaker. The processor is configured to receive signals from the calibrated variable load circuit and to process the signals to determine a trip threshold current and/or a trip time. A method of testing the ground fault circuit interrupt device includes a first step of providing an identification for the ground fault circuit interrupt device. Test data is then recorded in accordance with the identification. By comparing test data from an initial test with test data from a subsequent test, a trend of performance for the ground fault circuit interrupt device is determined.

Andrews, Lowell B. (2181-13th Ave. SW., Largo, FL 34640)

1998-01-01T23:59:59.000Z

70

Apparatus for and method of testing an electrical ground fault circuit interrupt device  

DOE Patents (OSTI)

An apparatus for testing a ground fault circuit interrupt device includes a processor, an input device connected to the processor for receiving input from an operator, a storage media connected to the processor for storing test data, an output device connected to the processor for outputting information corresponding to the test data to the operator, and a calibrated variable load circuit connected between the processor and the ground fault circuit interrupt device. The ground fault circuit interrupt device is configured to trip a corresponding circuit breaker. The processor is configured to receive signals from the calibrated variable load circuit and to process the signals to determine a trip threshold current and/or a trip time. A method of testing the ground fault circuit interrupt device includes a first step of providing an identification for the ground fault circuit interrupt device. Test data is then recorded in accordance with the identification. By comparing test data from an initial test with test data from a subsequent test, a trend of performance for the ground fault circuit interrupt device is determined. 17 figs.

Andrews, L.B.

1998-08-18T23:59:59.000Z

71

Switching power supply  

DOE Patents (OSTI)

The invention is a repratable capacitor charging, switching power supply. A ferrite transformer steps up a dc input. The transformer primary is in a full bridge configuration utilizing power MOSFETs as the bridge switches. The transformer secondary is fed into a high voltage, full wave rectifier whose output is connected directly to the energy storage capacitor. The transformer is designed to provide adequate leakage inductance to limit capacitor current. The MOSFETs are switched to the variable frequency from 20 to 50 kHz to charge a capacitor from 0.6 kV. The peak current in a transformer primary and secondary is controlled by increasing the pulse width as the capacitor charges. A digital ripple counter counts pulses and after a preselected desired number is reached an up-counter is clocked.

Mihalka, A.M.

1984-06-05T23:59:59.000Z

72

Microfabricated triggered vacuum switch  

DOE Patents (OSTI)

A microfabricated vacuum switch is disclosed which includes a substrate upon which an anode, cathode and trigger electrode are located. A cover is sealed over the substrate under vacuum to complete the vacuum switch. In some embodiments of the present invention, a metal cover can be used in place of the trigger electrode on the substrate. Materials used for the vacuum switch are compatible with high vacuum, relatively high temperature processing. These materials include molybdenum, niobium, copper, tungsten, aluminum and alloys thereof for the anode and cathode. Carbon in the form of graphitic carbon, a diamond-like material, or carbon nanotubes can be used in the trigger electrode. Channels can be optionally formed in the substrate to mitigate against surface breakdown.

Roesler, Alexander W. (Tijeras, NM); Schare, Joshua M. (Albuquerque, NM); Bunch, Kyle (Albuquerque, NM)

2010-05-11T23:59:59.000Z

73

Thermionic gas switch  

DOE Patents (OSTI)

A temperature responsive thermionic gas switch having folded electron emitting surfaces. An ionizable gas is located between the emitter and an interior surface of a collector, coaxial with the emitter. In response to the temperature exceeding a predetermined level, sufficient electrons are derived from the emitter to cause the gas in the gap between the emitter and collector to become ionized, whereby a very large increase in current in the gap occurs. Due to the folded emitter surface area of the switch, increasing the "on/off" current ratio and adjusting the "on" current capacity is accomplished.

Hatch, George L. (San Francisco, CA); Brummond, William A. (Livermore, CA); Barrus, Donald M. (San Jose, CA)

1986-01-01T23:59:59.000Z

74

Fast Switching Ferroelectric Materials for Accelerator Applications  

SciTech Connect

Fast switching (<10 nsec) measurement results on the recently developed BST(M) (barium strontium titanium oxide composition with magnesium-based additions) ferroelectric materials are presented. These materials can be used as the basis for new advanced technology components suitable for high-gradient accelerators. A ferroelectric ceramic has an electric field-dependent dielectric permittivity that can be altered by applying a bias voltage. Ferroelectric materials offer significant benefits for linear collider applications, in particular, for switching and control elements where a very short response time of <10 nsec is required. The measurement results presented here show that the new BST(M) ceramic exhibits a high tunability factor: a bias field of 40-50 kV/cm reduces the permittivity by a factor of 1.3-1.5. The recently developed technology of gold biasing contact deposition on large diameter (110 cm) thin wall ferroelectric rings allowed {approx}few nsec switching times in witness sample experiments. The ferroelectric rings can be used at high pulsed power (tens of megawatts) for X-band components as well as at high average power in the range of a few kilowatts for the L-band phase-shifter, under development for optimization of the ILC rf coupling. Accelerator applications include fast active X-band and Ka-band high-power ferroelectric switches, high-power X-band and L-band phase shifters, and tunable dielectric-loaded accelerating structures.

Kanareykin, A.; Schoessow, P. [Euclid Techlabs LLC, Solon, OH 44139 (United States); Nenasheva, E. [Ceramics Co. Ltd, St.Petersburg 194223 (Russian Federation); Yakovlev, V. [Omega-P Inc., New Haven, CT 06511 (United States); Dedyk, A.; Karmanenko, S.; Kozyrev, A.; Osadchy, V.; Kosmin, D.; Semenov, A. [St. Petersburg Electrical Engineering University, St. Petersburg 197376 (Russian Federation)

2006-11-27T23:59:59.000Z

75

Stability under Strategy Switching  

Science Conference Proceedings (OSTI)

We suggest that a process-like notion of strategy is relevant in the context of interactions in systems of self-interested agents. In this view, strategies are not plans formulated by rational agents considering all possible futures ... Keywords: Graphical games, strategy specifications, strategy switching

Soumya Paul; R. Ramanujam; Sunil Simon

2009-07-01T23:59:59.000Z

76

Transparent electrode for optical switch  

DOE Patents (OSTI)

The invention relates generally to optical switches and techniques for applying a voltage to an electro-optical crystal, and more particularly, to transparent electodes for an optical switch. System architectures for very large inertial confinement fusion (ICF) lasers require active optical elements with apertures on the order of one meter. Large aperture optical switches are needed for isolation of stages, switch-out from regenerative amplifier cavities and protection from target retroreflections.

Goldhar, J.; Henesian, M.A.

1984-10-19T23:59:59.000Z

77

Switching power pulse system  

DOE Patents (OSTI)

A switching system for delivering pulses of power from a source (10) to a load (20) using a storage capacitor (C3) charged through a rectifier (D1, D2), and maintained charged to a reference voltage level by a transistor switch (Q1) and voltage comparator (12). A thyristor (22) is triggered to discharge the storage capacitor through a saturable reactor (18) and fractional turn saturable transformer (16) having a secondary to primary turn ratio N of n:l/n=n.sup.2. The saturable reactor (18) functions as a "soaker" while the thyristor reaches saturation, and then switches to a low impedance state. The saturable transformer functions as a switching transformer with high impedance while a load coupling capacitor (C4) charges, and then switches to a low impedance state to dump the charge of the storage capacitor (C3) into the load through the coupling capacitor (C4). The transformer is comprised of a multilayer core (26) having two secondary windings (28, 30) tightly wound and connected in parallel to add their output voltage and reduce output inductance, and a number of single turn windings connected in parallel at nodes (32, 34) for the primary winding, each single turn winding linking a different one of the layers of the multilayer core. The load may be comprised of a resistive beampipe (40) for a linear particle accelerator and capacitance of a pulse forming network (42). To hold off discharge of the capacitance until it is fully charged, a saturable core (44) is provided around the resistive beampipe (40) to isolate the beampipe from the capacitance (42) until it is fully charged.

Aaland, Kristian (Livermore, CA)

1983-01-01T23:59:59.000Z

78

Certification of thread context switching  

Science Conference Proceedings (OSTI)

With recent efforts to build foundational certified software systems, two different approaches have been proposed to certify thread context switching. One is to certify both threads and context switching in a single logic system, and the other certifies ... Keywords: context switching, program safety, program verification, proof-carrying code

Yu Guo; Xin-Yu Jiang; Yi-Yun Chen

2010-07-01T23:59:59.000Z

79

Effect of Radiotherapy Interruptions on Survival in Medicare Enrollees With Local and Regional Head-and-Neck Cancer  

Science Conference Proceedings (OSTI)

Purpose: To investigate whether interruptions in radiotherapy are associated with decreased survival in a population-based sample of head-and-neck cancer patients. Methods and Materials: Using the Surveillance, Epidemiology, and End Results-Medicare linked database we identified Medicare beneficiaries aged 66 years and older diagnosed with local-regional head-and-neck cancer during the period 1997-2003. We examined claims records of 3864 patients completing radiotherapy for the presence of one or more 5-30-day interruption(s) in therapy. We then performed Cox regression analyses to estimate the association between therapy interruptions and survival. Results: Patients with laryngeal tumors who experienced an interruption in radiotherapy had a 68% (95% confidence interval, 41-200%) increased risk of death, compared with patients with no interruptions. Patients with nasal cavity, nasopharynx, oral, salivary gland, and sinus tumors had similar associations between interruptions and increased risk of death, but these did not reach statistical significance because of small sample sizes. Conclusions: Treatment interruptions seem to influence survival time among patients with laryngeal tumors completing a full course of radiotherapy. At all head-and-neck sites, the association between interruptions and survival is sensitive to confounding by stage and other treatments. Further research is needed to develop methods to identify patients most susceptible to interruption-induced mortality.

Fesinmeyer, Megan Dann [Fred Hutchinson Cancer Research Center, Seattle, WA (United States); Mehta, Vivek [Swedish Medical Center, Seattle, WA (United States); Blough, David [Fred Hutchinson Cancer Research Center, Seattle, WA (United States); School of Pharmacy, University of Washington, Seattle, WA (United States); Tock, Lauri [Fred Hutchinson Cancer Research Center, Seattle, WA (United States); Ramsey, Scott D., E-mail: sramsey@fhcrc.or [Fred Hutchinson Cancer Research Center, Seattle, WA (United States); School of Pharmacy, University of Washington, Seattle, WA (United States)

2010-11-01T23:59:59.000Z

80

An addressing independent networking structure favorable for all-optical packet switching  

Science Conference Proceedings (OSTI)

All-optical packet switching (AOPS) technology is essential to fully utilize the tremendous bandwidth provided by advanced optical communication techniques through forwarding packets in optical domain for the next generation network. However, long packet ... Keywords: addressing transparency, all-optical packet switching (AOPS), hierarchical source routing, networking structure

Shengming Jiang

2007-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "interrupting switch advanced" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Advanced Windows Test Facility  

NLE Websites -- All DOE Office Websites (Extended Search)

Exterior of Advanced Windows Test Facility Exterior of Advanced Windows Test Facility Advanced Windows Test Facility This multi-room laboratory's purpose is to test the performance and properties of advanced windows and window systems such as electrochromic windows, and automatically controlled shutters and blinds. The lab simulates real-world office spaces. Embedded instrumentation throughout the lab records solar gains and losses for specified time periods, weather conditions, energy use, and human comfort indicators. Electrochromic glazings promise to be a major advance in energy-efficient window technology, helping to achieve the goal of transforming windows and skylights from an energy liability in buildings to an energy source. The glazing can be reversibly switched from a clear to a transparent, colored

82

Thermal fatigue due to beam interruptions for an ALMR-type ATW  

SciTech Connect

Accelerator-driven subcritical reactors have been proposed for tasks such as accelerator transmutation of waste (ATW). In such a device, long-lived radioactive fission products and transuranic elements from spent fuel would be converted into short-lived radioactive isotopes and stable isotopes. One concern about such devices is that current proton accelerators typically experience beam interruptions many times per day. The beam interruptions last from seconds to hours. A beam interruption leads to a temperature transient similar to, but faster than, that from a reactor scram. These temperature transients cause thermal fatigue that can eventually lead to structural failures in various reactor components. The objective of the work reported here was to determine the design implications of this thermal fatigue.

Dunn, F.E.

2000-07-01T23:59:59.000Z

83

Electric circuit breaker comprising a plurality of vacuum interrupters simultaneously operated by a common operator  

DOE Patents (OSTI)

This circuit breaker comprises a plurality of a vacuum-type circuit interrupters, each having a movable contact rod. A common operating device for the interrupters comprises a linearly-movable operating member. The interrupters are mounted at one side of the operating member with their movable contact rods extending in a direction generally toward the operating member. Means is provided for mechanically coupling the operating member to the contact rods, and this means comprises a plurality of insulating operating rods, each connected at one end to the operating member and at its opposite end to one of the movable contact rods. The operating rods are of substantially equal length and have longitudinal axes that converge and intersect at substantially a common point.

Barkan, Philip (Stanford, CA); Imam, Imdad (Secane, PA)

1980-01-01T23:59:59.000Z

84

Plasma opening switch  

DOE Patents (OSTI)

A command triggered plasma opening switch assembly using an amplification stage. The assembly surrounds a coaxial transmission line and has a main plasma opening switch (POS) close to the load and a trigger POS upstream from the main POS. The trigger POS establishes two different current pathways through the assembly depended on whether it has received a trigger current pulse. The initial pathway has both POS's with plasma between their anodes and cathodes to form a short across the transmission line and isolating the load. The final current pathway is formed when the trigger POS receives a trigger current pulse which energizes its fast coil to push the conductive plasma out from between its anode and cathode, allowing the main transmission line current to pass to the fast coil of the main POS, thus pushing its plasma out the way so as to establish a direct current pathway to the load.

Savage, Mark E. (Albuquerque, NM); Mendel, Jr., Clifford W. (Albuquerque, NM)

2001-01-01T23:59:59.000Z

85

Optical fiber switch  

DOE Patents (OSTI)

Optical fiber switches operated by electrical activation of at least one laser light modulator through which laser light is directed into at least one polarizer are used for the sequential transport of laser light from a single laser into a plurality of optical fibers. In one embodiment of the invention, laser light from a single excitation laser is sequentially transported to a plurality of optical fibers which in turn transport the laser light to separate individual remotely located laser fuel ignitors. The invention can be operated electro-optically with no need for any mechanical or moving parts, or, alternatively, can be operated electro-mechanically. The invention can be used to switch either pulsed or continuous wave laser light.

Early, James W. (Los Alamos, NM); Lester, Charles S. (San Juan Pueblo, NM)

2002-01-01T23:59:59.000Z

86

Cygnus Diverter Switch Analysis  

Science Conference Proceedings (OSTI)

The Cygnus Dual Beam Radiographic Facility consists of two 2.25-MV, 60-kA, 50-ns x-ray sources fielded in an underground laboratory at the Nevada Test Site. The tests performed in this laboratory involve study of the dynamic properties of plutonium and are called subcritical experiments. From end-to-end, the Cygnus machines utilize the following components: Marx generator, water-filled pulse-forming line (PFL), waterfilled coaxial transmission line (WTL), 3-cell inductive voltage adder (IVA), and rod-pinch diode. The upstream WTL interface to the PFL is via a radial insulator with coaxial geometry. The downstream WTL terminates in a manifold where the center conductor splits into three lines which individually connect to each of the IVA cell inputs. There is an impedance mismatch at this juncture. It is a concern that a reflected pulse due to anomalous behavior in the IVA or diode might initiate breakdown upon arrival at the upstream PFL/WTL insulator. Therefore near the beginning of the WTL a radial diverter switch is installed to protect the insulator from over voltage and breakdown. The diverter has adjustable gap spacing, and an in-line aqueous-solution (sodium thiosulfate) resistor array for energy dissipation. There are capacitive voltage probes at both ends of the WTL and on the diverter switch. These voltage signals will be analyzed to determine diverter performance. Using this analysis the usefulness of the diverter switch will be evaluated.

G. Corrow, M. Hansen, D. Henderson, C. Mitton et al.

2008-02-01T23:59:59.000Z

87

Development and interrupting tests on 250KV 8KA HVDC circuit breaker  

SciTech Connect

This paper describes the circuit and component selections, development and equivalent circuit test results on an HVDC circuit breaker for an HVDC transmission line. A puffer type SF/sub 6/ gas interrupter for AC circuit breakers is utilized for interrupting DC current with injection of high-frequency inverse current from a commutating capacitor precharged to HVDC line voltage. Also, the effectiveness of application of the HVDC breaker to an HVDC system with two parallel transmission lines is demonstrated through the EMTP simulation.

Tokuyama, S.; Arimatsu, K.; Hirata, K.; Kato, Y.; Yoshioka, Y.

1985-09-01T23:59:59.000Z

88

Electric Power Interruption Cost Estimates for Individual Industries, Sectors, and the U.S. Economy  

E-Print Network (OSTI)

Distributed energy resources (DER) have been promoted as the least-cost approach to meeting steadily increasing energy demand. However, it is unclear whether DER deployment can maintain or improve the electric power supply reliability and quality currently available to consumers. This report address two key factors relating to this question: 1) characteristics of existing power supply reliability, and 2) costs resulting from supply interruptions characteristic of the existing power grid. Interruption cost data collected by the University of Saskatchewan was used in conjunction with data generated by the Census Bureaus Annual Survey of Manufacturers (Census Bureau, 1995), along with industry shares of gross domestic product (Bureau of Economic Analysis, 1995a) and gross output (Bureau of Economic Analysis, 1995b) to derive interruption cost estimates for U.S. industries at the 2-digit Standard Industrial Classification (SIC) level, as well as for broader sectors and the U.S. economy. Interruption cost estimates are presented as a function of outage duration (e.g., 20 minutes, 1-hour, 3-hour), and are normalized in terms of dollars per peak kW.

Balducci, P. J.; Roop, J. M.; Schienbein, L. A.; DeSteese, J. G.; Weimar, M. R.

2003-05-01T23:59:59.000Z

89

Unusual defects in silicon carbide thin films grown by multiple or interrupted growth technique  

Science Conference Proceedings (OSTI)

This paper discusses the growth and characterization of 3C-SiC films on Si (100) and (111) substrates using hexamethyldisilane (HMDS) as the source material in a resistance-heated furnace as well as the formation and microstructure of various types of ... Keywords: 3C-SiC, 3C-SiC nanowires, CVD, Defects, HMDS, Interrupted growth, Voids

A. Gupta; C. Jacob

2006-01-01T23:59:59.000Z

90

Battery switch for downhole tools  

Science Conference Proceedings (OSTI)

An electrical circuit for a downhole tool may include a battery, a load electrically connected to the battery, and at least one switch electrically connected in series with the battery and to the load. The at least one switch may be configured to close when a tool temperature exceeds a selected temperature.

Boling, Brian E. (Sugar Land, TX)

2010-02-23T23:59:59.000Z

91

"Smart" watchdog safety switch  

DOE Patents (OSTI)

A method and apparatus for monitoring a process having a periodic output so that the process equipment is not damaged in the event of a controller failure, comprising a low-pass and peak clipping filter, an event detector that generates an event pulse for each valid change in magnitude of the filtered periodic output, a timing pulse generator, a counter that increments upon receipt of any timing pulse and resets to zero on receipt of any event pulse, an alarm that alerts when the count reaches some preselected total count, and a set of relays that opens to stop power to process equipment. An interface module can be added to allow the switch to accept a variety of periodic output signals.

Kronberg, James W. (353 Church Rd., Beech Island, SC 29842)

1991-01-01T23:59:59.000Z

92

Smart watchdog safety switch  

DOE Patents (OSTI)

A method and apparatus for monitoring a process having a periodic output so that the process equipment is not damaged in the event of a controller failure, comprising a low-pass and peak clipping filter, an event detector that generates an event pulse for each valid change in magnitude of the filtered periodic output, a timing pulse generator, a counter that increments upon receipt of any timing pulse and resets to zero on receipt of any event pulse, an alarm that alerts when the count reaches some preselected total count, and a set of relays that open to stop power to process equipment. An interface module can be added to allow the switch to accept a variety of periodic output signals. 6 figs.

Kronberg, J.W.

1989-05-12T23:59:59.000Z

93

Optimized scalable network switch  

DOE Patents (OSTI)

In a massively parallel computing system having a plurality of nodes configured in m multi-dimensions, each node including a computing device, a method for routing packets towards their destination nodes is provided which includes generating at least one of a 2m plurality of compact bit vectors containing information derived from downstream nodes. A multilevel arbitration process in which downstream information stored in the compact vectors, such as link status information and fullness of downstream buffers, is used to determine a preferred direction and virtual channel for packet transmission. Preferred direction ranges are encoded and virtual channels are selected by examining the plurality of compact bit vectors. This dynamic routing method eliminates the necessity of routing tables, thus enhancing scalability of the switch.

Blumrich, Matthias A. (Ridgefield, CT); Chen, Dong (Croton on Hudson, NY); Coteus, Paul W. (Yorktown Heights, NY)

2010-02-23T23:59:59.000Z

94

Necessary optimality condition for Nonsmooth Switching Control ...  

E-Print Network (OSTI)

Jun 7, 2007 ... Abstract: This paper is concerned with a class optimal switching nonsmoth optimal control problem is considered. Both the switching instants...

95

Dielectric liquid pulsed-power switch  

DOE Patents (OSTI)

This disclosure identifies dielectric liquids for use as opening and closing switching media in pulsed power technology, and describes a dielectric-liquid-pulsed-power switch empolying flashlamps.

Christophorou, Loucas G. (Oak Ridge, TN); Faidas, Homer (Knoxville, TN)

1990-01-01T23:59:59.000Z

96

Cost of Power Interruptions to Electricity Consumers in the UnitedStates (U.S.)  

SciTech Connect

The massive electric power blackout in the northeastern U.S.and Canada on August 14-15, 2003 catalyzed discussions about modernizingthe U.S. electricity grid. Industry sources suggested that investments of$50 to $100 billion would be needed. This work seeks to better understandan important piece of information that has been missing from thesediscussions: What do power interruptions and fluctuations in powerquality (power-quality events) cost electricity consumers? We developed abottom-up approach for assessing the cost to U.S. electricity consumersof power interruptions and power-quality events (referred to collectivelyas "reliability events"). The approach can be used to help assess thepotential benefits of investments in improving the reliability of thegrid. We developed a new estimate based on publicly availableinformation, and assessed how uncertainties in these data affect thisestimate using sensitivity analysis.

Hamachi LaCommare, Kristina; Eto, Joseph H.

2006-02-16T23:59:59.000Z

97

Thermal fatigue due to beam interruptions in a Lead-Bismuth cooled ATW blanket  

Science Conference Proceedings (OSTI)

Thermal fatigue consequences of frequent accelerator beam interruptions are quantified for both sodium and lead-bismuth cooled blankets in current designs for accelerator transmutation of waste devices. Temperature response was calculated using the SASSYS-1 systems analysis code for an immediate drop in beam current from full power to zero. Coolant temperatures from SASSYS-1 were fed into a multi-node structure temperature calculation to obtain thermal strains for various structural components. Fatigue curves from the American Society of Mechanical Engineers Boiler and Pressure Vessel Code were used to determine the number of cycles that these components could endure, based on these thermal strains. Beam interruption frequency data from a current accelerator were used to estimate design lifetimes for components. Mitigation options for reducing thermal fatigue are discussed.

Dunn, F.

2000-11-15T23:59:59.000Z

98

Alarm toe switch. [Patent application  

DOE Patents (OSTI)

An alarm toe switch inserted within a shoe for energizing an alarm circuit in a covert manner includes an insole mounting pad into which a miniature reed switch is fixedly molded. An elongated slot perpendicular to the reed switch is formed in the bottom surface of the mounting pad. A permanent cylindrical magnet positioned in the forward portion of the slot with a diameter greater than the pad thickness causes a bump above the pad. A foam rubber block is also positioned in the slot rearwardly of the magnet and holds the magnet in normal inoperative relation. A non-magnetic support plate covers the slot and holds the magnet and foam rubber in the slot. The plate minimizes bending and frictional forces to improve movement of the magnet for reliable switch activation. The bump occupies the knuckle space beneath the big toe. When the big toe is scrunched rearwardly the magnet is moved within the slot relative to the reed switch, thus magnetically activating the switch. When toe pressure is released the foam rubber block forces the magnet back into normal inoperative position to deactivate the reed switch.

Ganyard, F.P.

1980-11-18T23:59:59.000Z

99

Advanced Materials  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Materials Advanced Materials Availability Technology Express Licensing Active Terahertz Metamaterial Devices Express Licensing Anion-Conducting Polymer, Composition, And...

100

Wide Bandgap Extrinsic Photoconductive Switches  

SciTech Connect

Photoconductive semiconductor switches (PCSS) have been investigated since the late 1970s. Some devices have been developed that withstand tens of kilovolts and others that switch hundreds of amperes. However, no single device has been developed that can reliably withstand both high voltage and switch high current. Yet, photoconductive switches still hold the promise of reliable high voltage and high current operation with subnanosecond risetimes. Particularly since good quality, bulk, single crystal, wide bandgap semiconductor materials have recently become available. In this chapter we will review the basic operation of PCSS devices, status of PCSS devices and properties of the wide bandgap semiconductors 4H-SiC, 6H-SiC and 2H-GaN.

Sullivan, J S

2012-01-17T23:59:59.000Z

Note: This page contains sample records for the topic "interrupting switch advanced" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Switch LLC | Open Energy Information  

Open Energy Info (EERE)

Product Installer and distributor of small-scale solar passive, PV, fuel cell, and other distributed energy systems. References Switch LLC1 LinkedIn Connections CrunchBase...

102

Switching stepsize strategies for PDIP  

E-Print Network (OSTI)

Apr 11, 2009 ... Table (1) shows the truth-values of the three conditions on which our switches depend on. Our motivation is to activate a line search procedure...

103

Field Operation Power Switching Safety  

Science Conference Proceedings (OSTI)

Safety is of paramount consideration in all aspects of utility operations. Power switching operations, due to their variable nature, are susceptible to errors that can place utility workers at risk, lower system reliability or ability to respond to contingencies, increase customer outages, lower customer satisfactions, and reduce revenue. This report summarizes the results of analysis of utility data collected on human error in power switching operations and describes industry techniques used to reduce t...

1996-10-11T23:59:59.000Z

104

Pocket Guide: Preventing Switching Errors  

Science Conference Proceedings (OSTI)

There are many conditions that are frequently identified as factors contributing to, if not directly causing, accidents and other unwanted events. These have come to be called "error-likely conditions." In 2010, the Electric Power Research Institute (EPRI) published report 1020018, Error-Likely Situations in Power Switching. That report was the first large-scale effort to fill the knowledge gap in the area of error-likely situations in power switching, and it identified over 100 potentially error-likely ...

2011-12-12T23:59:59.000Z

105

High PRF high current switch  

DOE Green Energy (OSTI)

A triggerable, high voltage, high current, spark gap switch for use in pu power systems. The device comprises a pair of electrodes in a high pressure hydrogen environment that is triggered by introducing an arc between one electrode and a trigger pin. Unusually high repetition rates may be obtained by undervolting the switch, i.e., operating the trigger at voltages much below the self-breakdown voltage of the device.

Moran, Stuart L. (Fredericksburg, VA); Hutcherson, R. Kenneth (College Park, MD)

1990-03-27T23:59:59.000Z

106

Multiferroics for Photovoltaics and Multiferroics Switching and ...  

Science Conference Proceedings (OSTI)

Nanostructured Magnetoelectrics & Multiferroics: Multiferroics for Photovoltaics and Multiferroics Switching and Domain Walls Program Organizers: Alain...

107

Nanomechanical switch for integration with CMOS logic.  

Science Conference Proceedings (OSTI)

We designed, fabricated and measured the performance of nanoelectromechanical (NEMS) switches. Initial data are reported with one of the switch designs having a measured switching time of 400 ns and an operating voltage of 5 V. The switches operated laterally with unmeasurable leakage current in the 'off' state. Surface micromachining techniques were used to fabricate the switches. All processing was CMOS compatible. A single metal layer, defined by a single mask step, was used as the mechanical switch layer. The details of the modeling, fabrication and testing of the NEMS switches are reported.

Nordquist, Christopher Daniel; Wolfley, Steven L.; Baker, Michael Sean; Czaplewski, David A.; Wendt, Joel Robert; Kraus, Garth Merlin; de Boer, Maarten Pieter; Patrizi, Gary A.

2008-11-01T23:59:59.000Z

108

Tests show ability of vacuum circuit breaker to interrupt fast transient recovery voltage rates of rise of transformer secondary faults  

Science Conference Proceedings (OSTI)

A vacuum circuit breaker demonstrated its ability to interrupt short circuits with faster than normal rates of rise of transient recovery voltage (TRV) at levels greater than those produced by most transformer secondary faults. Two recent exploratory test programs evaluated the interrupting ability of a 15kV vacuum circuit breaker containing interrupters of the rotating arc type with contacts made from a chromium-copper powder metal mixture. The interrupting conditions covered a wide range of currents from 10% to 130% of the 28kA rated short circuit current of the tested circuit breaker and a wide range of TRV rates of rise, including the relatively slow rate of rise, normally used in testing and found in most indoor circuit breaker applications, two faster rates of rise equaling and exceeding those found in a known power plant transformer secondary protection application, and the fastest rates of rise possible in the laboratory which exceed the requirements of most transformer secondary faults. These tests showed that the interrupting performance of the tested vacuum circuit breaker was unaffected by the TRV rate of rise to the fastest rates available in the test lab. Such a vacuum circuit breaker can therefore be used without TRV modifying capacitors to slow down the rate of rise provided by the power system. This ability is particularly important if analysis shows that the expected TRV from a transformer secondary fault has a fast rate of rise beyond the recognized ability of an older circuit breaker to acceptably interrupt.

Smith, R.K. [Westinghouse Science and Technology Center, Pittsburgh, PA (United States)

1995-01-01T23:59:59.000Z

109

Plasma flow switch experiment on Procyon  

SciTech Connect

This report presents the results obtained from a series of plasma flow switch experiments done on the Procyon explosive pulse power generator. These experiments involved switching into a fixed inductance dummy load and also into a dynamic implosion load. The results indicated that the switch did fairly well at switching current into the load, but the results for the implosion are more ambiguous. The results are compared to calculations and the implications for future plasma flow switch work are discussed.

Benage, J.F. Jr.; Bowers, R.; Peterson, D. [and others

1995-09-01T23:59:59.000Z

110

Understanding the cost of power interruptions to U.S. electricity consumers  

SciTech Connect

The massive electric power blackout in the northeastern United States and Canada on August 14-15, 2003 resulted in the U.S. electricity system being called ''antiquated'' and catalyzed discussions about modernizing the grid. Industry sources suggested that investments of $50 to $100 billion would be needed. This report seeks to quantify an important piece of information that has been missing from these discussions: how much do power interruptions and fluctuations in power quality (power-quality events) cost U.S. electricity consumers? Accurately estimating this cost will help assess the potential benefits of investments in improving the reliability of the grid. We develop a comprehensive end-use framework for assessing the cost to U.S. electricity consumers of power interruptions and power-quality events (referred to collectively as ''reliability events''). The framework expresses these costs as a function of: (1) Number of customers by type in a region; (2) Frequency and type of reliability events experienced annually (including both power interruptions and power-quality events) by these customers; (3) Cost of reliability events; and (4) Vulnerability of customers to these events. The framework is designed so that its cost estimate can be improved as additional data become available. Using our framework, we estimate that the national cost of power interruptions is about $80 billion annually, based on the best information available in the public domain. However, there are large gaps in and significant uncertainties about the information currently available. Notably, we were not able to develop an estimate of power-quality events. Sensitivity analysis of some of these uncertainties suggests that the total annual cost could range from less than $30 billion to more than $130 billion. Because of this large range and the enormous cost of the decisions that may be based on this estimate, we encourage policy makers, regulators, and industry to jointly under take the comparatively modest-cost improvements needed in the information used to estimate the cost of reliability events. Specific areas for improvement include: coordinated, nationwide collection of updated information on the cost of reliability events; consistent definition and recording of the duration and frequency of reliability events, including power-quality events; and improved information on the costs of and efforts by consumers to reduce their vulnerability to reliability events.

LaCommare, Kristina Hamachi; Eto, Joseph H.

2004-09-01T23:59:59.000Z

111

Understanding the cost of power interruptions to U.S. electricity consumers  

SciTech Connect

The massive electric power blackout in the northeastern United States and Canada on August 14-15, 2003 resulted in the U.S. electricity system being called ''antiquated'' and catalyzed discussions about modernizing the grid. Industry sources suggested that investments of $50 to $100 billion would be needed. This report seeks to quantify an important piece of information that has been missing from these discussions: how much do power interruptions and fluctuations in power quality (power-quality events) cost U.S. electricity consumers? Accurately estimating this cost will help assess the potential benefits of investments in improving the reliability of the grid. We develop a comprehensive end-use framework for assessing the cost to U.S. electricity consumers of power interruptions and power-quality events (referred to collectively as ''reliability events''). The framework expresses these costs as a function of: (1) Number of customers by type in a region; (2) Frequency and type of reliability events experienced annually (including both power interruptions and power-quality events) by these customers; (3) Cost of reliability events; and (4) Vulnerability of customers to these events. The framework is designed so that its cost estimate can be improved as additional data become available. Using our framework, we estimate that the national cost of power interruptions is about $80 billion annually, based on the best information available in the public domain. However, there are large gaps in and significant uncertainties about the information currently available. Notably, we were not able to develop an estimate of power-quality events. Sensitivity analysis of some of these uncertainties suggests that the total annual cost could range from less than $30 billion to more than $130 billion. Because of this large range and the enormous cost of the decisions that may be based on this estimate, we encourage policy makers, regulators, and industry to jointly under take the comparatively modest-cost improvements needed in the information used to estimate the cost of reliability events. Specific areas for improvement include: coordinated, nationwide collection of updated information on the cost of reliability events; consistent definition and recording of the duration and frequency of reliability events, including power-quality events; and improved information on the costs of and efforts by consumers to reduce their vulnerability to reliability events.

LaCommare, Kristina Hamachi; Eto, Joseph H.

2004-09-01T23:59:59.000Z

112

Better Switching Through Chemistry in Thin Ferroelectrics | Advanced...  

NLE Websites -- All DOE Office Websites (Extended Search)

do just that, proving that not just electricity but also a little bit of chemistry can flip the structure and thus the polarity of a ferroelectric film. The researchers studied...

113

Dielectric liquid pulsed-power switch  

DOE Patents (OSTI)

This disclosure identifies dielectric liquids for use as opening and closing switching media in pulsed power technology, and describes a dielectric-liquid-pulsed-power switch employing flashlamps. 2 figs.

Christophorou, L.; Faidas, H.

1989-08-30T23:59:59.000Z

114

Packet-Switched Optical Networks  

Science Conference Proceedings (OSTI)

In this article, we present a platform design for packet-switched OTDM networks operating at ultrafast bit-rates for modern multiprocessor interconnects. The design is implemented in a prototype 8-node transparent shuffle network. The flow control in ... Keywords: Communication system interfaces, signalling, synchronization, clock and data recovery, PLLs

Ben Y. Yu; Paul Toliver; Robert J. Runser; Kung-Li Deng; Deyu Zhou; Ivan Glesk; Paul R. Prucnal

1998-01-01T23:59:59.000Z

115

Fast superconducting magnetic field switch  

DOE Patents (OSTI)

The superconducting magnetic switch or fast kicker magnet is employed with an electron stream or a bunch of electrons to rapidly change the direction of flow of the electron stream or bunch of electrons. The apparatus employs a beam tube which is coated with a film of superconducting material. The tube is cooled to a temperature below the superconducting transition temperature and is subjected to a constant magnetic field which is produced by an external dc magnet. The magnetic field produced by the dc magnet is less than the critical field for the superconducting material, thus, creating a Meissner Effect condition. A controllable fast electromagnet is used to provide a magnetic field which supplements that of the dc magnet so that when the fast magnet is energized the combined magnetic field is now greater than the critical field and the superconducting material returns to its normal state allowing the magnetic field to penetrate the tube. This produces an internal field which effects the direction of motion and of the electron stream or electron bunch. The switch can also operate as a switching mechanism for charged particles. Magnetic switches and particularly fast kicker magnets are used in the accelerator industry to quickly deflect particle beams into and out of various transport lines, storage rings, dumps, and specifically to differentially route individual bunches of particles from a train of bunches which are injected or ejected from a given ring.

Goren, Y.; Mahale, N.K.

1995-12-31T23:59:59.000Z

116

Switching Feeding Among Sound and Infected Prey  

Science Conference Proceedings (OSTI)

Here we investigate the switching feeding behavior of predators in the context of one single prey population

Ines S. Hotopp; Horst Malchow; Ezio Venturino

2009-01-01T23:59:59.000Z

117

Spark gap switch with spiral gas flow  

DOE Patents (OSTI)

A spark gap switch having a contaminate removal system using an injected gas. An annular plate concentric with an electrode of the switch defines flow paths for the injected gas which form a strong spiral flow of the gas in the housing which is effective to remove contaminates from the switch surfaces. The gas along with the contaminates is exhausted from the housing through one of the ends of the switch.

Brucker, J.P.

1988-03-23T23:59:59.000Z

118

EPRI Power Switching Safety and Reliability Project  

Science Conference Proceedings (OSTI)

The EPRI Switching Safety and Reliability (SS&R) Project features 24 completed studies to date in seven broad subject areas: 1) switching process, 2) tools and technological aids used in the planning and execution of switching, 3) switching errors, 4) incident analysis and investigation, 5) management methods and processes, 6) training, and 7) definitions and terminology. This report presents the history and accomplishments of the SS&R project as well as the extent of penetration of its findings into uti...

2008-12-16T23:59:59.000Z

119

Brief paper: Identification of switched Markov autoregressive eXogenous systems with hidden switching state  

Science Conference Proceedings (OSTI)

Identification of the Switched Markov Autoregressive eXogenous (ARX) systems is considered in this paper. With a Markov chain model governing the evolution of the hidden switching state, a Switched Markov ARX System (SMARX) is formulated and a solution ... Keywords: Expectation-Maximization method, Hidden Markov model, Switched process, System identification

X. Jin; B. Huang

2012-02-01T23:59:59.000Z

120

Brief paper: Optimal switching instants for a switched-capacitor DC/DC power converter  

Science Conference Proceedings (OSTI)

We consider a switched-capacitor DC/DC power converter with variable switching instants. The determination of optimal switching instants giving low output ripple and strong load regulation is posed as a non-smooth dynamic optimization problem. By introducing ... Keywords: Control parametrization enhancing transform, Impulsive dynamical system, Power converter, Semi-infinite programming, Switched linear system

R. C. Loxton; K. L. Teo; V. Rehbock; W. K. Ling

2009-04-01T23:59:59.000Z

Note: This page contains sample records for the topic "interrupting switch advanced" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Switch for serial or parallel communication networks  

DOE Patents (OSTI)

A communication switch apparatus and a method for use in a geographically extensive serial, parallel or hybrid communication network linking a multi-processor or parallel processing system has a very low software processing overhead in order to accommodate random burst of high density data. Associated with each processor is a communication switch. A data source and a data destination, a sensor suite or robot for example, may also be associated with a switch. The configuration of the switches in the network are coordinated through a master processor node and depends on the operational phase of the multi-processor network: data acquisition, data processing, and data exchange. The master processor node passes information on the state to be assumed by each switch to the processor node associated with the switch. The processor node then operates a series of multi-state switches internal to each communication switch. The communication switch does not parse and interpret communication protocol and message routing information. During a data acquisition phase, the communication switch couples sensors producing data to the processor node associated with the switch, to a downlink destination on the communications network, or to both. It also may couple an uplink data source to its processor node. During the data exchange phase, the switch couples its processor node or an uplink data source to a downlink destination (which may include a processor node or a robot), or couples an uplink source to its processor node and its processor node to a downlink destination.

Crosette, Dario B. (DeSoto, TX)

1994-01-01T23:59:59.000Z

122

A switch level fault simulation environment  

Science Conference Proceedings (OSTI)

This paper presents a fault simulation environment which accepts pure switch level or mixed switch/RT level descriptions of the design under test. Switch level fault injection strategies for the stuck-at, transition and logic bridge models are presented. ...

V. Krishnaswamy; J. Casas; T. Tetzlaff

2000-06-01T23:59:59.000Z

123

Switch for serial or parallel communication networks  

DOE Patents (OSTI)

A communication switch apparatus and a method for use in a geographically extensive serial, parallel or hybrid communication network linking a multi-processor or parallel processing system has a very low software processing overhead in order to accommodate random burst of high density data. Associated with each processor is a communication switch. A data source and a data destination, a sensor suite or robot for example, may also be associated with a switch. The configuration of the switches in the network are coordinated through a master processor node and depends on the operational phase of the multi-processor network: data acquisition, data processing, and data exchange. The master processor node passes information on the state to be assumed by each switch to the processor node associated with the switch. The processor node then operates a series of multi-state switches internal to each communication switch. The communication switch does not parse and interpret communication protocol and message routing information. During a data acquisition phase, the communication switch couples sensors producing data to the processor node associated with the switch, to a downlink destination on the communications network, or to both. It also may couple an uplink data source to its processor node. During the data exchange phase, the switch couples its processor node or an uplink data source to a downlink destination (which may include a processor node or a robot), or couples an uplink source to its processor node and its processor node to a downlink destination. 9 figs.

Crosette, D.B.

1994-07-19T23:59:59.000Z

124

Stability analysis of switched linear singular systems  

Science Conference Proceedings (OSTI)

This paper addresses the stability analysis problem for switched linear continuous-time singular systems. First, based on the equivalent dynamics decomposition form, a refined description for state jumps of the switched singular system is presented, ... Keywords: Average dwell time, Exponential stability, State jumps, Switched singular systems

Lei Zhou, Daniel W. C. Ho, Guisheng Zhai

2013-05-01T23:59:59.000Z

125

Understanding the Cost of Power Interruptions to U.S. Electricity Consumers  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

5718 5718 Understanding the Cost of Power Interruptions to U.S. Electricity Consumers Kristina Hamachi LaCommare and Joseph H. Eto Energy Analysis Department Ernest Orlando Lawrence Berkeley National Laboratory University of California Berkeley Berkeley, California 94720 Environmental Energy Technologies Division September 2004 http://eetd.lbl.gov/ea/EMP/EMP-pubs.html This work described in this paper was funded by the Office of Electric Transmission and Distribution, Energy Storage Program and by the Assistant Secretary for Energy Efficiency and Renewable Energy, Office of Planning, Budget, and Analysis of the U.S. Department of Energy under Contract No. DE-AC03-76F00098. ERNEST ORLANDO LAWRENCE BERKELEY NATIONAL LABORATORY

126

Industry-Wide Error Rate Database in Power Switching: Switching Practices Survey  

Science Conference Proceedings (OSTI)

This report describes a survey that was conducted in 2013 to collect data on utility practices in operational power switching and on rates of switching errors. Over the years, the Electric Power Research Institute (EPRI) Switching Safety and Reliability (SS&R) project has developed two previous estimates of switching errors. These estimates were derived as part of research reported in the 1996 EPRI report Field Operation Power Switching Safety (TR-106465) and in the 2000 EPRI report ...

2013-11-19T23:59:59.000Z

127

Secure videoconferencing equipment switching system and method  

DOE Patents (OSTI)

A switching system and method are provided to facilitate use of videoconference facilities over a plurality of security levels. The system includes a switch coupled to a plurality of codecs and communication networks. Audio/Visual peripheral components are connected to the switch. The switch couples control and data signals between the Audio/Visual peripheral components and one but nor both of the plurality of codecs. The switch additionally couples communication networks of the appropriate security level to each of the codecs. In this manner, a videoconferencing facility is provided for use on both secure and non-secure networks.

Hansen, Michael E. (Livermore, CA)

2009-01-13T23:59:59.000Z

128

Definition: Automated Distribution Circuit Switches | Open Energy  

Open Energy Info (EERE)

Circuit Switches Circuit Switches Jump to: navigation, search Dictionary.png Automated Distribution Circuit Switches Distribution circuit switches that can be operated automatically in response to control signals from local sensors, distribution automation systems, or grid control systems. Such switches can be installed as automated devices or existing equipment can be retrofitted with controls and communications. The degree of automation depends on the controls and communications system implemented. These switches can be opened or closed to isolate portions of a distribution circuit that has experienced a short circuit (fault), or must be taken out of service for maintenance or other operations. When used in combination, these switches can reroute power from other substations or nearby distribution circuits.[1]

129

New Details of Ferroelectric Switching  

NLE Websites -- All DOE Office Websites (Extended Search)

New Details of Ferroelectric Switching New Details of Ferroelectric Switching All of our current information technology relies on devices that process information as binary ones and zeroes. Ferroelectric materials are of special interest to developers of the next generation of such devices because they exhibit polarized electronic states that can represent bits of information. Moreover, these materials retain their polarization states without consuming electrical power, making ferroelectrics the subject of intense study for nonvolatile memory applications in which data is stored even when the power is turned off. One problem, however, is polarization fatigue: after a number of cycles, the switchable polarization begins to taper off, rendering the device unusable. Recently, a team of researchers

130

Fast superconducting magnetic field switch  

DOE Patents (OSTI)

The superconducting magnetic switch or fast kicker magnet is employed with electron stream or a bunch of electrons to rapidly change the direction of flow of the electron stream or bunch of electrons. The apparatus employs a beam tube which is coated with a film of superconducting material. The tube is cooled to a temperature below the superconducting transition temperature and is subjected to a constant magnetic field which is produced by an external dc magnet. The magnetic field produced by the dc magnet is less than the critical field for the superconducting material, thus, creating a Meissner Effect condition. A controllable fast electromagnet is used to provide a magnetic field which supplements that of the dc magnet so that when the fast magnet is energized the combined magnetic field is now greater that the critical field and the superconducting material returns to its normal state allowing the magnetic field to penetrate the tube. This produces an internal field which effects the direction of motion and of the electron stream or electron bunch. The switch can also operate as a switching mechanism for charged particles.

Goren, Yehuda (Mountain View, CA); Mahale, Narayan K. (The Woodlands, TX)

1996-01-01T23:59:59.000Z

131

Stable nonlinear Mach-Zehnder fiber switch  

DOE Patents (OSTI)

An all-optical fiber switch is implemented within a short Mach-Zehnder interferometer configuration. The Mach-Zehnder switch is constructed to have a high temperature stability so as to minimize temperature gradients and other thermal effects which result in undesirable instability at the output of the switch. The Mach-Zehnder switch of the preferred embodiment is advantageously less than 2 cm in length between couplers to be sufficiently short to be thermally stable, and full switching is accomplished by heavily doping one or both of the arms between the couplers so as to provide a highly nonlinear region within one or both of the arms. A pump input source is used to affect the propagation characteristics of one of the arms to control the output coupling ratio of the switch. Because of the high nonlinearity of the pump input arm, low pump powers can be used, thereby alleviating difficulties and high cost associated with high pump input powers.

Digonnet, Michel J. F. (Palo Alto, CA); Shaw, H. John (Palo Alto, CA); Pantell, Richard H. (Menlo Park, CA); Sadowski, Robert W. (Camp Doha, KW)

1999-01-01T23:59:59.000Z

132

A magnetically switched kicker for proton extraction  

SciTech Connect

The application of magnetic current amplification and switching techniques to the generation of precise high current pulses for switching magnets is described. The square loop characteristic of Metglas tape wound cores at high excitation levels provides excellent switching characteristics for microsecond pulses. The rugged and passive nature of this type pulser makes it possible to locate the final stages of amplification at the load for maximum efficiency. 12 refs., 8 figs.

Dinkel, J.; Biggs, J.

1989-03-01T23:59:59.000Z

133

Optical switching system and method  

DOE Patents (OSTI)

An optically bistable device is disclosed. The device includes a uniformly thick layer of amorphous silicon to constitute a Fabry-Perot chamber positioned to provide a target area for a probe beam. The probe beam has a maximum energy less than the energy band gap of the amorphous semiconductor. In a preferred embodiment, a multilayer dielectric mirror is positioned on the Fabry-Perot chamber to increase the finesse of switching of the device. The index of refraction of the amorphous material is thermally altered to alter the transmission of the probe beam.

Ranganathan, Radha (N. Tonawanda, NY); Gal, Michael (Engadine, AU); Taylor, P. Craig (Salt Lake City, UT)

1992-01-01T23:59:59.000Z

134

SWITCHING TRANSMITTER POSITIONING OF SYNCHROS  

DOE Patents (OSTI)

A transformer apparatus is designed for effecting the step positioning of synchro motors. The apparatus is provided with ganged switches and pre- selected contacts to permit the units and tens selection of the desired angular position for the synchro motor rotor with only the movement of two selector knobs required. With the selection thus made, the appropriate pre-selected signal is delivered to the synchro motor for positioning the rotor of the latter as selected. The transformer apparatus is divided into smaller arrangements to conform with coraputed trigonometric relations which will give the desired results. (AEC)

Wolff, H.

1962-03-13T23:59:59.000Z

135

Microwave-triggered laser switch  

DOE Patents (OSTI)

A high-repetition rate switch is described for delivering short duration, high-powered electrical pulses from a pulsed-charged dc power supply. The present invention utilizes a microwave-generating device such as a magnetron that is capable of producing high-power pulses at high-pulse repetition rates and fast-pulse risetimes for long periods with high reliability. The rail-gap electrodes provide a large surface area that reduces induction effects and minimizes electrode erosion. Additionally, breakdown is initiated in a continuous geometric fashion that also increases operating lifetime of the device.

Piltch, M.S.

1982-05-19T23:59:59.000Z

136

Microwave-triggered laser switch  

DOE Patents (OSTI)

A high-repetition rate switch for delivering short duration, high-power electrical pulses from a pulsed-charged dc power supply. The present invention utilizes a microwave-generating device such as a magnetron that is capable of producing high-power pulses at high-pulse repetition rates and fast-pulse risetimes for long periods with high reliability. The rail-gap electrodes provide a large surface area that reduces induction effects and minimizes electrode erosion. Additionally, breakdown is initiated in a continuous geometric fashion that also increases operating lifetime of the device.

Piltch, Martin S. (Los Alamos, NM)

1984-01-01T23:59:59.000Z

137

Edges and switches, tunnels and bridges  

Science Conference Proceedings (OSTI)

Edge casing is a well-known method to improve the readability of drawings of non-planar graphs. A cased drawing orders the edges of each edge crossing and interrupts the lower edge in an appropriate neighborhood of the crossing. Certain orders will lead ... Keywords: Edge casing, Graph drawing

David Eppstein; Marc van Kreveld; Elena Mumford; Bettina Speckmann

2009-10-01T23:59:59.000Z

138

The Science of the Speedy Switch  

NLE Websites -- All DOE Office Websites (Extended Search)

the tiny but mighty onoff switch that makes up the core of everything from massive exascale computers to mobile electronic devices. Since silicon transistors are approaching...

139

Multi-megavolt low jitter multistage switch  

DOE Patents (OSTI)

It is one object of the present invention to provide a multistage switch capable of holding off numerous megavolts, until triggered, from a particle beam accelerator of the type used for inertial confinement fusion. The invention provides a multistage switch having low timing jitter and capable of producing multiple spark channels for spreading current over a wider area to reduce electrode damage and increase switch lifetime. The switch has fairly uniform electric fields and a short spark gap for laser triggering and is engineered to prevent insulator breakdowns.

Humphreys, D.R.; Penn, K.J. Jr.

1985-06-19T23:59:59.000Z

140

Advanced Gasification  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Gasification Carbon feedstock gasification is a promising pathway for high-efficiency, low-pollutant power generation and chemical production. The inability, however, to...

Note: This page contains sample records for the topic "interrupting switch advanced" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Advanced Ceramics  

Science Conference Proceedings (OSTI)

Table 3   Raw materials for advanced structural and magnetic (ferrite) ceramics...conductivity Wear resistance Oxygen sensors, fuel cells (potential), high-temperature

142

Advanced Manufacturing  

Science Conference Proceedings (OSTI)

... new metrologically-based methods for industry as well ... for Advanced Catalyst Development and Durability ... Electron-Beam Irradiation of Solar Cells. ...

2013-07-29T23:59:59.000Z

143

Resistive Switching Characteristics of Mixed Oxides  

Science Conference Proceedings (OSTI)

Forming free bipolar switching was observed in case of Graphene Oxide. The switching ... A New Class of Molecularly-tailored Nanomaterials and Interfaces For Energy Conversion and Thermal Management A Review of ... Novel Bimetallic Plasmonic Nanomaterials ... The Surface Energy of the Al-Cu-Fe Quasicrystal.

144

High-explosive driven crowbar switch  

SciTech Connect

The disclosure relates to a compact explosive driven switch for use as a low resistance, low inductance crowbar switch. A high-explosive charge extrudes a deformable conductive metallic plate through a polyethylene insulating layer to achieve a hard current contact with a supportive annular conductor.

Dike, Robert S. (Los Alamos, NM); Kewish, Jr., Ralph W. (Los Alamos, NM)

1976-01-13T23:59:59.000Z

145

Gas mixtures for spark gap closing switches  

DOE Patents (OSTI)

Gas mixtures for use in spark gap closing switches comprised of fluorocarbons and low molecular weight, inert buffer gases. To this can be added a third gas having a low ionization potential relative to the buffer gas. The gas mixtures presented possess properties that optimized the efficiency spark gap closing switches. 6 figs.

Christophorou, L.G.; McCorkle, D.L.; Hunter, S.R.

1987-02-20T23:59:59.000Z

146

Analysis of FPGA/FPIC switch modules  

Science Conference Proceedings (OSTI)

Switch modules are the most important component of the routing resources in FPGAs/FPICs. Previous works have shown that switch modules with higher routability result in better area performance for practical applications. We consider in this paper an ... Keywords: Computer-aided design of VLSI, FPGA, FPIC, layout, synthesis

Yao-Wen Chang; Kai Zhu; Guang-Ming Wu; D. F. Wong; C. K. Wong

2003-01-01T23:59:59.000Z

147

Design issues for mixed media packet switching networks  

Science Conference Proceedings (OSTI)

In this paper we present some of the important design issues for packet switching networks with both satellite and terrestrial components---which we call mixed media packet switching networks. Satellite packet switching has considerable promise ...

D. Huynh; H. Kobayashi; F. F. Kuo

1976-06-01T23:59:59.000Z

148

Advanced Materials  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Materials Advanced Materials Advanced Materials Express Licensing Active Terahertz Metamaterial Devices Express Licensing Anion-Conducting Polymer, Composition, And Membrane Express Licensing Analysis Of Macromolecule, Liggands And Macromolecule-Lingand Complexes Express Licensing Carbon Microtubes Express Licensing Chemical Synthesis Of Chiral Conducting Polymers Express Licensing Forming Adherent Coatings Using Plasma Processing Express Licensing Hydrogen Scavengers Express Licensing Laser Welding Of Fused Quartz Express Licensing Multiple Feed Powder Splitter Negotiable Licensing Boron-10 Neutron Detectors for Helium-3 Replacement Negotiable Licensing Insensitive Extrudable Explosive Negotiable Licensing Durable Fuel Cell Membrane Electrode Assembly (MEA) Express Licensing Method of Synthesis of Proton Conducting Materials

149

SLAC National Accelerator Laboratory - Using Light to Switch...  

NLE Websites -- All DOE Office Websites (Extended Search)

arrangement on the mechanisms of ultrafast magnetic switching," Schlotter said. LCLS has been used for similar experiments studying nanoscale magnetic switching, and...

150

An efficient multi-channel wireless switching system  

E-Print Network (OSTI)

the scheduling operation in wireless switching systems. Thefor the local operation between a wireless switch port andoperations in interference-rich multi-channel wireless

Shim, Jaewook

2010-01-01T23:59:59.000Z

151

Mathematical Modeling of Current-Interrupt and Pulse Operation of Valve-Regulated Lead Acid Cells  

E-Print Network (OSTI)

are resolved. Of the two candidate battery systems, the low cost and ease of operation of the VRLA battery the last decade, advanced batteries have re- ceived much attention. At present, only the valve-regulated lead acid VRLA and the nickel-metal hydride Ni-MH battery are being actively considered

152

Advanced Ceramics  

Science Conference Proceedings (OSTI)

Table 2   Classification of advanced ceramics...solid electrolytes, piezoelectrics, dielectrics, superconductors Optical Low absorption coefficient Lamps, windows, fiber optics, infrared optics Nuclear Irradiation resistance, high absorption coefficient,

153

The role of interruptible natural gas customers in New England heating oil markets: A preliminary examination of events in January-February 2000  

Science Conference Proceedings (OSTI)

This report provides an analysis of data collected from gas service providers and end-use customers in the six New England States and offers a preliminary assessment of the impact of interruptible gas customers on the distillate fuel oil market this past winter. Based on information collected and analyzed as of October 2000, the main findings areas follows: (1) For interruptible gas customers with distillate fuel oil as a backup fuel, their volume of interruptions was equivalent to about 1 to 2 percent of the total sales of distillate fuel oil in New England during January-February 2000. For the two peak weeks of gas supply interruptions, however, the equivalent volume of distillate fuel oil amounted to an estimated 3 to 6 percent of total sales in New England. There were no interruptions of the natural gas service during the 2-month period. (2) Purchases of distillate fuel oil by interruptible gas customers may have contributed somewhat to the spike in the price of distillate fuel oil in January-February 2000, especially during the peak weeks of gas interruptions. Nevertheless, other factors--a sudden drop in temperatures, low regional stocks of distillate fuels, and weather-related supply problems during a period of high customer demand--appear to have played a significant role in this price spike, as they have in previous spikes. (3) While this preliminary analysis suggests that interruptible natural gas service does not threaten the stability of the home heating oil market, several steps might be taken-without undermining the benefits of interruptible service--to reduce the potential adverse impacts of gas supply interruptions in times of market stress. Regardless of the magnitude of the impact of distillate fuel oil purchases by interruptible gas customers on Northeast heating oil markets, the threat of future heating oil price spikes and supply problems still remains. To help counter the threat, President Clinton in July 2000 directed Secretary Richardson to establish a heating oil component of the Strategic Petroleum Reserve in the Northeast, and 2 million barrels of heating oil are now stored in the reserve. Other possible policy options are outlined.

None

2000-11-01T23:59:59.000Z

154

Advanced Manufacturing Office: Solicitations  

NLE Websites -- All DOE Office Websites (Extended Search)

Solicitations on Twitter Bookmark Advanced Manufacturing Office: Solicitations on Google Bookmark Advanced Manufacturing Office: Solicitations on Delicious Rank Advanced...

155

Advanced Manufacturing Office: Webcasts  

NLE Websites -- All DOE Office Websites (Extended Search)

Office: Webcasts on Twitter Bookmark Advanced Manufacturing Office: Webcasts on Google Bookmark Advanced Manufacturing Office: Webcasts on Delicious Rank Advanced...

156

Advanced Manufacturing Office: Subscribe  

NLE Websites -- All DOE Office Websites (Extended Search)

Office: Subscribe on Twitter Bookmark Advanced Manufacturing Office: Subscribe on Google Bookmark Advanced Manufacturing Office: Subscribe on Delicious Rank Advanced...

157

Advanced Manufacturing Office: Workshops  

NLE Websites -- All DOE Office Websites (Extended Search)

Office: Workshops on Twitter Bookmark Advanced Manufacturing Office: Workshops on Google Bookmark Advanced Manufacturing Office: Workshops on Delicious Rank Advanced...

158

Fuel Switching Strategies for the 1990s  

E-Print Network (OSTI)

Prices of petroleum fuels and natural gas are predicted to rise in the 1990's, due to a number of global factor including supplies, demands and environmental pressure. Environmental regulatory initiatives will force the use of cleaner fuels. Excess butane in summer resulting from lowered gasoline volatility and various increasing supply factors will create fuel purchasing opportunities. It was found that in-place propane switching capability among manufacturers could be adapted to absorb all the excess butane. Economics and risks of acquiring and storing spot-market butane as a strategic switching fuel are explored. Other fuel switching concepts are also considered.

Cascone, R.

1990-06-01T23:59:59.000Z

159

Mercury switch with non-wettable electrodes  

DOE Patents (OSTI)

A mercury switch device comprising a pool of mercury and a plurality of electrical contacts made of or coated with a non-wettable material such as titanium diboride.

Karnowsky, M.M.; Yost, F.G.

1986-04-09T23:59:59.000Z

160

Mercury switch with non-wettable electrodes  

DOE Patents (OSTI)

A mercury switch device comprising a pool of mercury and a plurality of electrical contacts made of or coated with a non-wettable material such as titanium diboride.

Karnowsky, Maurice M. (Albulquerque, NM); Yost, Frederick G. (Carlsbad, NM)

1987-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "interrupting switch advanced" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

A multiple secretary problem with switch costs  

E-Print Network (OSTI)

In this thesis, we utilize probabilistic reasoning and simulation methods to determine the optimal selection rule for the secretary problem with switch costs, in which a known number of applicants appear sequentially in a ...

Ding, Jiachuan

2007-01-01T23:59:59.000Z

162

Delayed switching applied to memristor neural networks  

Science Conference Proceedings (OSTI)

Magnetic flux and electric charge are linked in a memristor. We reported recently that a memristor has a peculiar effect in which the switching takes place with a time delay because a memristor possesses a certain inertia. This effect was named the ''delayed switching effect.'' In this work, we elaborate on the importance of delayed switching in a brain-like computer using memristor neural networks. The effect is used to control the switching of a memristor synapse between two neurons that fire together (the Hebbian rule). A theoretical formula is found, and the design is verified by a simulation. We have also built an experimental setup consisting of electronic memristive synapses and electronic neurons.

Wang, Frank Z.; Yang Xiao; Lim Guan [Future Computing Group, School of Computing, University of Kent, Canterbury (United Kingdom); Helian Na [School of Computer Science, University of Hertfordshire, Hatfield (United Kingdom); Wu Sining [Xyratex, Havant (United Kingdom); Guo Yike [Department of Computing, Imperial College, London (United Kingdom); Rashid, Md Mamunur [CERN, Geneva (Switzerland)

2012-04-01T23:59:59.000Z

163

Data Link Switching Client Access Protocol  

Science Conference Proceedings (OSTI)

This memo describes the Data Link Switching Client Access Protocol that is used between workstations and routers to transport SNA/ NetBIOS traffic over TCP sessions. Any questions or comments should be sent to dcap@cisco.com.

S. Chiang; J. Lee; H. Yasuda

1997-02-01T23:59:59.000Z

164

Advanced Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Systems: Advanced Systems: high Performance fenestration systems Research areas: Research activities to improve the performance of windows and other fenestration products must address window systems issues as well as Glazing Materials research. LBNL activities in the area of Advanced Systems include research at both the product level and the building envelope and building systems levels. Highly insulating windows - using non structural center layers Lower cost solutions to more insulating three layer glazing systems, with the potential to turn windows in U.S. heating dominated residential applications into net-energy gainers. Highly Insulating Window Frames In collaboration with the Norwegian University of Science and Technology, we are researching the potentials for highly insulating window frames. Our initial work examines European frames with reported U-factors under 0.15 Btu/hr-ft2-F. Future research aims to analyze these designs, verify these performance levels and ensure that procedures used to calculate frame performance are accurate.

165

Utility Documentation of Switching and Clearance Procedures  

Science Conference Proceedings (OSTI)

This report builds on previous research, notably EPRI Report 1013109 Study of Outage Request Switching and Clearance Forms, and examines the documentation that specifies how utility personnel are expected to perform switching tagging and clearance activities. Materials were collected from some 20 utilities and were analyzed to evaluate characteristics of the documents related to ease of use and effective presentation of information. The research also examines completeness and the level of detail of the i...

2006-11-13T23:59:59.000Z

166

Generic Terminology Versus Specific Jargon in Power System Switching  

Science Conference Proceedings (OSTI)

This Technical Update report summarizes work performed in 2008 on the "Generic Terminology versus Specific Jargon in Power System Switching" task conducted by the EPRI Power Switching and Reliability project. Previous work was documented in reports 1013915 and 1012374. Research indicates that use of jargon or unfamiliar terms in power switching can result in switching errors, hazardous situations, and unintended power outages.

2008-11-11T23:59:59.000Z

167

Evaluation of hardware and software schedulers for embedded switches  

Science Conference Proceedings (OSTI)

High-speed packet switches become increasingly important to embedded systems because they provide multiple parallel data paths necessary in emerging systems such as embedded multiprocessors, multiprotocol communication processors, and so on. The most ... Keywords: ATM switches, embedded switches, embedded systems, packet switches, scheduling

Dimitrios N. Serpanos; Poluxeni Mountrouidou; Maria Gamvrili

2004-11-01T23:59:59.000Z

168

Alternative Fuels Data Center: Colonial Williamsburg Switches to  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Colonial Williamsburg Colonial Williamsburg Switches to Alternative Transportation to someone by E-mail Share Alternative Fuels Data Center: Colonial Williamsburg Switches to Alternative Transportation on Facebook Tweet about Alternative Fuels Data Center: Colonial Williamsburg Switches to Alternative Transportation on Twitter Bookmark Alternative Fuels Data Center: Colonial Williamsburg Switches to Alternative Transportation on Google Bookmark Alternative Fuels Data Center: Colonial Williamsburg Switches to Alternative Transportation on Delicious Rank Alternative Fuels Data Center: Colonial Williamsburg Switches to Alternative Transportation on Digg Find More places to share Alternative Fuels Data Center: Colonial Williamsburg Switches to Alternative Transportation on AddThis.com...

169

The University of Texas at Dallas Advanced Network Research Labs 1 Generalized Burst Assembly and Scheduling Techniques for  

E-Print Network (OSTI)

The University of Texas at Dallas Advanced Network Research Labs 1 Generalized Burst Assembly Jason P. Jue, and Biao Chen Advanced Network Research Labs The University of Texas at Dallas, USA #12;The University of Texas at Dallas Advanced Network Research Labs 2 Outline · Optical Burst Switching

Vokkarane, Vinod M.

170

Advanced Search  

NLE Websites -- All DOE Office Websites (Extended Search)

Publications Publications Advanced Search Most publications by Environmental Energy Technologies Division authors are searchable from this page, including peer-reviewed publications, book chapters, conference proceedings and LBNL reports. Filter Advanced Search Publications list This publications database is an ongoing project, and not all Division publications are represented here yet. For additional help see the bottom of this page. Documents Found: 4418 Title Keyword LBNL Number Author - Any - Abadie, Marc O Abbey, Chad Abdolrazaghi, Mohamad Aberg, Annika Abhyankar, Nikit Abraham, Marvin M Abshire, James B Abushakra, Bass Acevedo-Ruiz, Manuel Aceves, Salvador Ache, Hans J Ackerly, David D Ackerman, Andrew S Adamkiewicz, Gary Adams, J W Adams, Carl Adamson, Bo Addy, Nathan Addy, Susan E Aden, Nathaniel T Adesola, Bunmi Adhikari,

171

Advanced Combustion  

NLE Websites -- All DOE Office Websites (Extended Search)

Systems Systems Advanced Combustion Background Conventional coal-fired power plants utilize steam turbines to generate electricity, which operate at efficiencies of 35-37 percent. Operation at higher temperatures and pressures can lead to higher efficiencies, resulting in reduced fuel consumption and lower greenhouse gas emissions. Higher efficiency also reduces CO2 production for the same amount of energy produced, thereby facilitating a reduction in greenhouse gas emissions. When combined, oxy-combustion comes with an efficiency hit, so it will actually increase the amount of CO2 to be captured. But without so much N2 in the flue gas, it will be easier and perhaps more efficient to capture, utilize and sequester. NETL's Advanced Combustion Project and members of the NETL-Regional University

172

Advanced Combustion  

Science Conference Proceedings (OSTI)

The activity reported in this presentation is to provide the mechanical and physical property information needed to allow rational design, development and/or choice of alloys, manufacturing approaches, and environmental exposure and component life models to enable oxy-fuel combustion boilers to operate at Ultra-Supercritical (up to 650{degrees}C & between 22-30 MPa) and/or Advanced Ultra-Supercritical conditions (760{degrees}C & 35 MPa).

Holcomb, Gordon R. [NETL

2013-03-11T23:59:59.000Z

173

Photonic switching devices based on semiconductor nanostructures  

E-Print Network (OSTI)

Squeezing and guiding light into semiconductor nanostructures delivers revolutionary concepts of photonic devices, which may offer a practical pathway towards power-efficient optical networks. In this review, we consider photonic switches using semiconductor quantum dots (QDs) and photonic cavities. By intuitively introducing in a field enhancement factor, the optical nonlinearity of nano-photonic switches can be understood and this has shown their unique features to dramatically improve the power-density/speed limitation that has lain in conventional photonic switches for decades. In addition, the power consumption has been reduced due to the atom-like characterization of QDs as well as the nano-size footprint of photonic cavities. Based on this theoretical perspective, the current progress of QD/cavity switches is reviewed in terms of various optical nonlinearities which have been employed to demonstrate photonic switching at the nanoscale. Emerging functionalities enabled by cavity nonlinear effects such as the wavelength tuning and Purcell-factor tuning have been further introduced.

Chao-Yuan Jin; Osamu Wada

2013-08-11T23:59:59.000Z

174

Magnetic switch for reactor control rod. [LMFBR  

DOE Patents (OSTI)

A magnetic reed switch assembly is described for activating an electromagnetic grapple utilized to hold a control rod in position above a reactor core. In normal operation the magnetic field of a permanent magnet is short-circuited by a magnetic shunt, diverting the magnetic field away from the reed switch. The magnetic shunt is made of a material having a Curie-point at the desired release temperature. Above that temperature the material loses its ferromagnetic properties, and the magnetic path is diverted to the reed switch which closes and short-circuits the control circuit for the control rod electro-magnetic grapple which allows the control rod to drop into the reactor core for controlling the reactivity of the core.

Germer, J.H.

1982-09-30T23:59:59.000Z

175

Communication switch for serial and parallel network  

DOE Patents (OSTI)

This is a communication switch apparatus and a method for use in a geographically extensive serial, parallel or hybrid communication network, linking a multiprocessor or parallel processing system. It has a very low software processing overhead and accommodates random burst of high density data. Each processor has a communication switch which may have a data source, data destination, sensor or a robot associated with it. The configuration of the switches are coordinated through a master processor node and depends on the operational phase of the multiprocessor network:data acquisition, data processing and data exchange. The communication system design maximizes data routing while maintaining data integrity which is achieved through the reduction of communication protocol overhead and amplification of signals.

Crosetto, D.B.

1992-01-01T23:59:59.000Z

176

Magnetic switch for reactor control rod  

DOE Patents (OSTI)

A magnetic reed switch assembly for activating an electromagnetic grapple utilized to hold a control rod in position above a reactor core. In normal operation the magnetic field of a permanent magnet is short-circuited by a magnetic shunt, diverting the magnetic field away from the reed switch. The magnetic shunt is made of a material having a Curie-point at the desired release temperature. Above that temperature the material loses its ferromagnetic properties, and the magnetic path is diverted to the reed switch which closes and short-circuits the control circuit for the control rod electromagnetic grapple which allows the control rod to drop into the reactor core for controlling the reactivity of the core.

Germer, John H. (San Jose, CA)

1986-01-01T23:59:59.000Z

177

A knowledge-based approach to optimize switching in substations  

Science Conference Proceedings (OSTI)

Automatic sequence switching has been an important pursuit in the field of substation automation. This paper presents an intelligent approach to optimize switching sequences in electric substations. This paper starts with a presentation of the optimal sequence switching problem. It then suggests a knowledge-based model of a substation switch network organized in a tri-level hierarchical structure, and a set of basic techniques suitable for the general task of network re-organization. An intelligent optimal sequence switching strategy for substations based on modelling techniques is presented. An expert system in PROLOG used to formalize the sequence of switching operations and an application in substations is described.

Zhang, Z.Z.; Hope, G.S.; Malik, O.P. (Dept. of Electrical Engineering, Univ. of Calgary (CA))

1990-01-01T23:59:59.000Z

178

Manufacturing fuel-switching capability, 1988  

SciTech Connect

Historically, about one-third of all energy consumed in the United States has been used by manufacturers. About one-quarter of manufacturing energy is used as feedstocks and raw material inputs that are converted into nonenergy products; the remainder is used for its energy content. During 1988, the most recent year for which data are available, manufacturers consumed 15.5 quadrillion British thermal units (Btu) of energy to produce heat and power and to generate electricity. The manufacturing sector also has widespread capabilities to switch from one fuel to another for either economic or emergency reasons. There are numerous ways to define fuel switching. For the purposes of the Manufacturing Energy Consumption Survey (MECS), fuel switching is defined as the capability to substitute one energy source for another within 30 days with no significant modifications to the fuel-consuming equipment, while keeping production constant. Fuel-switching capability allows manufacturers substantial flexibility in choosing their mix of energy sources. The consumption of a given energy source can be maximized if all possible switching into that energy source takes place. The estimates in this report are based on data collected on the 1988 Manufacturing Energy Consumption Survey (MECS), Forms 846 (A through C). The EIA conducts this national sample survey of manufacturing energy consumption on a triennial basis. The MECS is the only comprehensive source of national-level data on energy-related information for the manufacturing industries. The MECS was first conducted in 1986 to collect data for 1985. This report presents information on the fuel-switching capabilities of manufacturers in 1988. This report is the second of a series based on the 1988 MECS. 8 figs., 31 tabs.

1991-09-01T23:59:59.000Z

179

Optically triggered high voltage switch network and method for switching a high voltage  

DOE Patents (OSTI)

An optically triggered solid state switch and method for switching a high voltage electrical current. A plurality of solid state switches (350) are connected in series for controlling electrical current flow between a compensation capacitor (112) and ground in a reactive power compensator (50, 50') that monitors the voltage and current flowing through each of three distribution lines (52a, 52b and 52c), which are supplying three-phase power to one or more inductive loads. An optical transmitter (100) controlled by the reactive power compensation system produces light pulses that are conveyed over optical fibers (102) to a switch driver (110') that includes a plurality of series connected optical triger circuits (288). Each of the optical trigger circuits controls a pair of the solid state switches and includes a plurality of series connected resistors (294, 326, 330, and 334) that equalize or balance the potential across the plurality of trigger circuits. The trigger circuits are connected to one of the distribution lines through a trigger capacitor (340). In each switch driver, the light signals activate a phototransistor (300) so that an electrical current flows from one of the energy reservoir capacitors through a pulse transformer (306) in the trigger circuit, producing gate signals that turn on the pair of serially connected solid state switches (350).

El-Sharkawi, Mohamed A. (Renton, WA); Andexler, George (Everett, WA); Silberkleit, Lee I. (Mountlake Terrace, WA)

1993-01-19T23:59:59.000Z

180

EPRI Power Switching Safety and Reliability Project  

Science Conference Proceedings (OSTI)

This report presents brief descriptions of the publications of the EPRI Switching Safety and Reliability (SS&R) Project and of the presentations at the annual EPRI SS&R Conferences from 1996 (the year of the projects inception) until 2010. The SS&R Project was initiated in 1996. Its purpose was to analyze switching errors and related incidents and to determine effective ways of limiting their occurrence. At the 1997 EPRI SS&R Conference, it became clear to EPRI and to the participants that there was a ne...

2011-04-12T23:59:59.000Z

Note: This page contains sample records for the topic "interrupting switch advanced" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Magnetic field switching in parallel quantum dots  

E-Print Network (OSTI)

We show that the Coulomb blockade in parallel dots pierced by magnetic flux $\\Phi$ completely blocks the resonant current for any value of $\\Phi$ except for integer multiples of the flux quantum $\\Phi_0$. This non-analytic (switching) dependence of the current on $\\Phi$ arises only when the dot states that carry the current are of the same energy. The time needed to reach the steady state, however, diverges when $\\Phi\\to n\\Phi_0$. This current switch effect can find application in nano-circuit devices.

Li, Feng; Zhang, Wei-Min; Gurvitz, S A

2008-01-01T23:59:59.000Z

182

Advanced Energy Storage Publications  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Energy Storage Publications Reports: Advanced Technology Development Program For Lithium-Ion Batteries: Gen 2 Performance Evaluation Final Report Advanced Technology...

183

Advanced Manufacturing Office: News  

NLE Websites -- All DOE Office Websites (Extended Search)

Manufacturing Office: News on Twitter Bookmark Advanced Manufacturing Office: News on Google Bookmark Advanced Manufacturing Office: News on Delicious Rank Advanced Manufacturing...

184

Advanced Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Ductility EnhancEmEnt of molybDEnum Ductility EnhancEmEnt of molybDEnum PhasE by nano-sizED oxiDE DisPErsions Description Using computational modeling techniques, this research aims to develop predictive capabilities to facilitate the design and optimization of molybdenum (Mo), chromium (Cr), and other high-temperature structural materials to enable these materials to withstand the harsh environments of advanced power generation systems, such as gasification-based systems. These types of materials are essential to the development of highly efficient, clean energy technologies such as low-emission power systems that use coal or other fossil fuels.

185

Advanced Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Super HigH-TemperaTure alloyS and Super HigH-TemperaTure alloyS and CompoSiTeS From nb-W-Cr SySTemS Description The U.S. Department of Energy's Office of Fossil Energy (DOE-FE) has awarded a three-year grant to the University of Texas at El Paso (UTEP) and Argonne National Laboratory (ANL) to jointly explore the high-temperature properties of alloys composed of niobium (Nb), tungsten (W), and chromium (Cr). The grant is administered by the Advanced Research (AR) program of the National

186

Mission Advancing  

NLE Websites -- All DOE Office Websites (Extended Search)

NETL Accomplishments NETL Accomplishments - the lab 2 Mission Advancing energy options to fuel our economy, strengthen our security, and improve our environment. Renewed Prosperity Through Technological Innovation - Letter from the Director NETL: the ENERGY lab 4 6 3 Contents Technology Transfer Patents and Commercialization Sharing Our Expertise Noteworthy Publications 60 62 63 64 66 Environment, Economy, & Supply Carbon Capture and Storage Partnerships Work to Reduce Atmospheric CO 2 Demand-Side Efficiencies New NETL Facility Showcases Green Technologies Environment & Economy Materials Mercury Membranes NETL Education Program Produces Significant Achievement Monitoring Water Economy & Supply NETL's Natural Gas Prediction Tool Aids Hurricane Recovery Energy Infrastructure

187

Carbon nano-relays for low power switching  

E-Print Network (OSTI)

In this thesis two unique carbon based nanoelectromechanical switches or carbon nano-relays are demonstrated as a toolkit for investigating NEMs based low power switching. The first is a vertical carbon nano-relay, consisting ...

Milaninia, Kaveh Mehdi

2009-01-01T23:59:59.000Z

188

A zero-crossing switched-capacitor filter design  

E-Print Network (OSTI)

Design of switched capacitor circuits in scaled CMOS technologies is becoming difficult because of low device intrinsic gain and reduced power supply voltage. To solve these problems, comparator-based switched-capacitor ...

Lee, Sungah

2008-01-01T23:59:59.000Z

189

A thermodynamic switch for chromosome colocalization  

E-Print Network (OSTI)

A general model for the early recognition and colocalization of homologous DNA sequences is proposed. We show, on a thermodynamic ground, how the distance between two homologous DNA sequences is spontaneously regulated by the concentration and affinity of diffusible mediators binding them, which act as a switch between two phases corresponding to independence or colocalization of pairing regions.

M. Nicodemi; B. Panning; A. Prisco

2008-09-27T23:59:59.000Z

190

Switching rates of multi-step reactions  

E-Print Network (OSTI)

We consider a switching rate of a meta-stable reaction scheme, which includes reactions with arbitrary steps, e.g. $kA\\to(k+r)A$. Employing WKB approximation, controlled by a large system size, we evaluate both the exponent and the pre-exponential factor for the rate. The results are illustrated on a number of examples.

Escudero, Carlos

2008-01-01T23:59:59.000Z

191

Isolated and soft-switched power converter  

DOE Patents (OSTI)

An isolated and soft-switched power converter is used for DC/DC and DC/DC/AC power conversion. The power converter includes two resonant tank circuits coupled back-to-back through an isolation transformer. Each resonant tank circuit includes a pair of resonant capacitors connected in series as a resonant leg, a pair of tank capacitors connected in series as a tank leg, and a pair of switching devices with anti-parallel clamping diodes coupled in series as resonant switches and clamping devices for the resonant leg. The power converter is well suited for DC/DC and DC/DC/AC power conversion applications in which high-voltage isolation, DC to DC voltage boost, bidirectional power flow, and a minimal number of conventional switching components are important design objectives. For example, the power converter is especially well suited to electric vehicle applications and load-side electric generation and storage systems, and other applications in which these objectives are important. The power converter may be used for many different applications, including electric vehicles, hybrid combustion/electric vehicles, fuel-cell powered vehicles with low-voltage starting, remote power sources utilizing low-voltage DC power sources, such as photovoltaics and others, electric power backup systems, and load-side electric storage and generation systems.

Peng, Fang Zheng (Knoxville, TN); Adams, Donald Joe (Knoxville, TN)

2002-01-01T23:59:59.000Z

192

Google Earth Tip Sheet Switch between  

E-Print Network (OSTI)

Google Earth Tip Sheet Hide/Show Sidebar Add Placemark Add Polygon Add Path Add Image Overlay Show/Hide Ruler Show Sunlight Switch between Sky and Earth Email Print View in Google Maps Drag to rotate the view item Stop TourTransparency slider Google Earth User Interface New Placemark Dialog Box Name will appear

Smith-Konter, Bridget

193

Optically initiated silicon carbide high voltage switch  

DOE Patents (OSTI)

An improved photoconductive switch having a SiC or other wide band gap substrate material, such as GaAs and field-grading liners composed of preferably SiN formed on the substrate adjacent the electrode perimeters or adjacent the substrate perimeters for grading the electric fields.

Caporaso, George J. (Livermore, CA); Sampayan, Stephen E. (Manteca, CA); Sullivan, James S. (Livermore, CA); Sanders; David M. (Livermore, CA)

2011-02-22T23:59:59.000Z

194

EPRI Switching Safety and Reliability Reference Book: First Edition  

Science Conference Proceedings (OSTI)

Switching operations in electric power systems must be performed safely to avoid injury to the workers who perform the operations and to minimize the possibility of unscheduled outages or equipment damage due to erroneous switching.This report is the first edition of the EPRI Switching Safety and Reliability Reference Book. The book, known as the Black Book, joins the EPRI Color Book series of reference materials. Additional chapters of the EPRI Switching ...

2013-02-25T23:59:59.000Z

195

Advanced Research  

NLE Websites -- All DOE Office Websites (Extended Search)

05/2007 05/2007 NitrogeN evolutioN aNd CorrosioN MeChaNisMs With oxyCoMbustioN of Coal Description Under a grant from the University Coal Research (UCR) program, Brigham Young University (BYU) is leading a three-year research effort to investigate the physical processes that several common types of coal undergo during oxy-fuel combustion. Specifically, research addresses the mixture of gases emitted from burning, particularly such pollutants as nitrogen oxides (NO X ) and carbon dioxide (CO 2 ), and the potential for corrosion at the various stages of combustion. The UCR program is administered by the Advanced Research Program at the National Energy Technology Laboratory (NETL), under the U.S. Department of Energy's Office of

196

Proposed high speed packet switch for broadband integrated networks  

Science Conference Proceedings (OSTI)

The design of a high speed, broadband packet switch with two priority levels for application in integrated voice/data networks is presented. The packet switch can efficiently cope with 128 byte packets converging on it from eight 140 Mbit/s dynamic time ... Keywords: backbone network, broadband integrated services digital networks, high speed packet switch, voice/data integration

Krishna Thilakam; Ashok Jhunjhunwala

1989-12-01T23:59:59.000Z

197

Modeling of switching operations using fault matrix method  

Science Conference Proceedings (OSTI)

Switching operations in energy supply networks are either modeled by adding or removing artificial nodes which results in state dependent grid topology or by setting the switch impedance to high or low value. This procedure is not very accurate and can ... Keywords: admittance matrix, fault matrix method, power system, switching operation, transmission lines

Martin Wolter; Bernd R. Oswald

2007-05-01T23:59:59.000Z

198

Reconfigurable 14 InP-based optical switch  

Science Conference Proceedings (OSTI)

An integrated 1x4InP-based optical switch is reported. The device is quite simple and full device operation is achieved by injecting electrical currents to two electrodes. Since the operation of the switch relies on current spreading, using the carrier-induced ... Keywords: Beam steering, Carrier induced, Integrated optics, Multiple quantum wells, Optical switch

D. A. May-Arrioja; P. LiKamWa

2008-03-01T23:59:59.000Z

199

RF-MEMS capacitive switches with high reliability  

DOE Patents (OSTI)

A reliable long life RF-MEMS capacitive switch is provided with a dielectric layer comprising a "fast discharge diamond dielectric layer" and enabling rapid switch recovery, dielectric layer charging and discharging that is efficient and effective to enable RF-MEMS switch operation to greater than or equal to 100 billion cycles.

Goldsmith, Charles L.; Auciello, Orlando H.; Carlisle, John A.; Sampath, Suresh; Sumant, Anirudha V.; Carpick, Robert W.; Hwang, James; Mancini, Derrick C.; Gudeman, Chris

2013-09-03T23:59:59.000Z

200

Float level switch for a nuclear power plant containment vessel  

DOE Patents (OSTI)

This invention is a float level switch used to sense rise or drop in water level in a containment vessel of a nuclear power plant during a loss of coolant accident. The essential components of the device are a guide tube, a reed switch inside the guide tube, a float containing a magnetic portion that activates a reed switch, and metal-sheathed, ceramic-insulated conductors connecting the reed switch to a monitoring system outside the containment vessel. Special materials and special sealing techniques prevent failure of components and allow the float level switch to be connected to a monitoring system outside the containment vessel. 1 figures.

Powell, J.G.

1993-11-16T23:59:59.000Z

Note: This page contains sample records for the topic "interrupting switch advanced" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Float level switch for a nuclear power plant containment vessel  

DOE Patents (OSTI)

This invention is a float level switch used to sense rise or drop in water level in a containment vessel of a nuclear power plant during a loss of coolant accident. The essential components of the device are a guide tube, a reed switch inside the guide tube, a float containing a magnetic portion that activates a reed switch, and metal-sheathed, ceramic-insulated conductors connecting the reed switch to a monitoring system outside the containment vessel. Special materials and special sealing techniques prevent failure of components and allow the float level switch to be connected to a monitoring system outside the containment vessel.

Powell, James G. (Clifton Park, NY)

1993-01-01T23:59:59.000Z

202

Magnetic field switching in parallel quantum dots  

E-Print Network (OSTI)

We show that the Coulomb blockade in parallel dots pierced by magnetic flux $\\Phi$ completely blocks the resonant current for any value of $\\Phi$ except for integer multiples of the flux quantum $\\Phi_0$. This non-analytic (switching) dependence of the current on $\\Phi$ arises only when the dot states that carry the current are of the same energy. The time needed to reach the steady state, however, diverges when $\\Phi\\to n\\Phi_0$.

Feng Li; Xin-Qi Li; Wei-Min Zhang; S. A. Gurvitz

2008-03-11T23:59:59.000Z

203

HIGH VOLTAGE, HIGH CURRENT SPARK GAP SWITCH  

DOE Patents (OSTI)

A high voltage and current spark gap switch comprising two main electrodes insulatingly supported in opposed spaced relationship and a middle electrode supported medially between the main electrodes and symmetrically about the median line of the main electrodes is described. The middle electrode has a perforation aligned with the median line and an irradiation electrode insulatingly supported in the body of the middle electrode normal to the median line and protruding into the perforation. (AEC)

Dike, R.S.; Lier, D.W.; Schofield, A.E.; Tuck, J.L.

1962-04-17T23:59:59.000Z

204

II.AdvancedTcl Advanced Tcl  

E-Print Network (OSTI)

119 P A R T II.AdvancedTcl II Advanced Tcl Part II describes advanced programming techniques that support sophisticated applications. The Tcl interfaces remain simple, so you can quickly construct pow- erful applications. Chapter 10 describes eval, which lets you create Tcl programs on the fly

Chen, Yuanzhu Peter

205

Switch Switch  

NLE Websites -- All DOE Office Websites (Extended Search)

David Fritz or Marco Cammarata SXR L272 CAVALLERI, ANDREA Probing the Fate of Static Stripes in LESCO 18 as a Transient Superconducting Phase is Formed Bill Schlotter or Josh...

206

Quantifying the heat switching capability of a thermionic diode  

DOE Green Energy (OSTI)

The Integrated Solar Upper Stage (ISUS) Advanced Technology Demonstrator (ATD) program, recently initiated by the US Air Force Phillips Laboratory (USAF PL), will demonstrate the feasibility of a combined solar power and propulsion upper stage. The solar bimodal design approach will use thermal energy storage to reduce engine mass and concentrator area. However, in order to store enough energy over an orbit period there must be minimal heat lost with a system that is designed to remove heat for energy conversion. A unique feature of thermionics is their ability to reduce heat flow by reducing or eliminating the electron cooling. However, demonstration and quantification of this capability is needed. This paper presents the results to date of the Receiver Diode Integration Test, one of two critical experiments of the ISUS ATD program being performed by the Idaho National Engineering Laboratory (INEL). Results of the demonstration testing of thermionic heat pipe modules (THPMs) to operate as heat switches in conjunction with the solar receiver cavity are presented as are the performance limits and operational constraints of a combined receiver/diode subsystem.

Snyder, A.M.; Verrill, D.A.

1995-12-01T23:59:59.000Z

207

Alternative and Advanced Fuels  

Energy.gov (U.S. Department of Energy (DOE))

There are a variety of alternative and advanced fuels available, which are used to fuel alternative and advanced vehicles. Learn more about:

208

Help - Advanced Search  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Search The advanced search form will help you create a more specific search in the Publications database. First, specify your search criteria. You can search by author,...

209

Scaling of Superconducting Switches for Extraction of Magnetic Energy  

E-Print Network (OSTI)

In certain cases it is necessary to extract the energy from a superconducting magnet when it quenches, in order to limit the heat generated by the event and thus prevent irreversible damage. This is usually achieved by opening a contact breaker across a resistor in the circuit feeding the magnet. For the heavy currents used to excite large magnets such switches incorporate sophisticated devices to limit arcing during the operation; besides being quite large and expensive, such switches have a limited lifetime. It is therefore interesting to consider the use of superconducting switches to perform this function, the advantage being that such switches would (i) not require maintenance and (ii) would be housed within the cryogenic environment of the magnet, and thus avoid permanent diversion of the current in and out of that environment to the mechanical switch (which operates at room temperature). However, practical switches for such an application are made up of superconductor in a metal matrix, and it is conve...

Ballarino, A

2010-01-01T23:59:59.000Z

210

Assessment of Efficiency and Application of Advanced Motor Technologies  

Science Conference Proceedings (OSTI)

This technical update explores four major emerging motor technologies. The four advanced motor types are Permanent magnet Brushless DC Motors (BLDC), Permanent Magnet Synchronous Motors (PMSM), Switched Reluctance Motors and Field Oriented Vector Control Motors. These motor technologies are not necessarily new, but are becoming popular and attractive solutions because of material cost reductions, controller innovations or the promise of higher efficiency and improved component reliability. Overall, the a...

2009-12-23T23:59:59.000Z

211

Generic Terminology vs. Specific Jargon in Power System Switching  

Science Conference Proceedings (OSTI)

EPRI research has revealed that terminology used in switching operations varies among utilities, operating regions, and even within utility divisions. But just how different is the terminology, and can these differences compromise efficiency....or even safety? To find out, EPRI engaged Berkshire Harrison to solicit, collect, and analyze switching jargon used by member organizations, identify potential conflicts, and investigate the feasibility of compiling a "dictionary" of generic switching terms and th...

2007-09-19T23:59:59.000Z

212

Current-level triggered plasma-opening switch  

DOE Patents (OSTI)

An opening switch for very high power electrical pulses uses a slow magnetic field to confine a plasma across a gap between two electrodes. The plasma conducts the electric pulse across the gap while the switch is closed. A magnetic field generated by the pulse repels the slow magnetic field from the negative electrode to push the plasma from the electrode, opening the switch. A plurality of radial vanes may be used to enhance the slow magnetic field.

Mendel, Clifford W. (Albuquerque, NM)

1989-01-01T23:59:59.000Z

213

EPRI Switching Safety and Reliability Reference Book: Second Edition  

Science Conference Proceedings (OSTI)

Switching operations in electric power systems must be performed safely to avoid injury to workers who perform the operations, and to minimize the possibility of unscheduled outages or equipment damage due to erroneous switching.This report is the second edition of the EPRI Switching Safety and Reliability Reference Book. The book, known as the Black Book, joins the EPRI Color Book series of valuable reference ...

2013-12-18T23:59:59.000Z

214

Solid-State Transfer Switch Development  

Science Conference Proceedings (OSTI)

EPRIs multi-function Solid-State Switchgear System (4-S) will be a first-generation power-electronics replacement for conventional distribution switchgear. In 2007, EPRI began a project to identify major application areas and demonstration of the technology. EPRI also coordinated this effort with other EPRI programs related to the development of fault current limiters. As part of this project, EPRI is developing, testing, and refining an S-GTO based transfer switch. The S-GTO based Static Transfer Switc...

2008-12-01T23:59:59.000Z

215

GaAs photoconductive semiconductor switch  

DOE Patents (OSTI)

A high gain, optically triggered, photoconductive semiconductor switch (PCSS) implemented in GaAs as a reverse-biased pin structure with a passivation layer above the intrinsic GaAs substrate in the gap between the two electrodes of the device. The reverse-biased configuration in combination with the addition of the passivation layer greatly reduces surface current leakage that has been a problem for prior PCSS devices and enables employment of the much less expensive and more reliable DC charging systems instead of the pulsed charging systems that needed to be used with prior PCSS devices.

Loubriel, Guillermo M. (Sandia Park, NM); Baca, Albert G. (Albuquerque, NM); Zutavern, Fred J. (Albuquerque, NM)

1998-01-01T23:59:59.000Z

216

Organic solid state optical switches and method for producing organic solid state optical switches  

DOE Patents (OSTI)

This invention consists of a light-intensity dependent molecular switch comprised of a compound which shuttles an electron or a plurality of electrons from a plurality of electron donors to an electron acceptor upon being stimulated with light of predetermined wavelengths, and a method for making said compound.

Wasielewski, M.R.; Gaines, G.L.; Niemczyk, M.P.; Johnson, D.G.; Gosztola, D.J.; O`Neil, M.P.

1993-01-01T23:59:59.000Z

217

Regional performance targets for transparent near-infrared switching...  

NLE Websites -- All DOE Office Websites (Extended Search)

glazings, NIR-switching, Performance targets, Solar heat gain Abstract With building heating and cooling accounting for nearly 14% of the national energy consumption, emerging...

218

The switching dynamics of the bacterial flagellar motor  

E-Print Network (OSTI)

Many swimming bacteria are propelled by flagellar motors that stochastically switch between the clockwise and counterclockwise rotation direction. While the switching dynamics are one of the most important characteristics of flagellar motors, the mechanisms that control switching are poorly understood. We present a statistical-mechanical model of the flagellar rotary motor, which consists of a number of stator proteins that drive the rotation of a ring of rotor proteins, which in turn drives the rotation of a flagellar filament. At the heart of our model is the assumption that the rotor protein complex can exist in two conformational states corresponding to the two respective rotation directions, and that switching between these states depends on interactions with the stator proteins. This naturally couples the switching dynamics to the rotation dynamics, making the switch sensitive to torque and speed. Another key element of our model is that after a switching event, it takes time for the load to build up, due to polymorphic transitions of the filament. Our model predicts that this slow relaxation dynamics of the filament, in combination with the load dependence of the switching frequency, leads to a characteristic switching time, in agreement with recent observations.

Siebe B. van Albada; Sorin Tanase-Nicola; Pieter Rein ten Wolde

2008-11-14T23:59:59.000Z

219

Transient analysis of a two-phase hydrogen heat switch  

DOE Green Energy (OSTI)

A transient, thermal analysis of a two-phase hydrogen heat switch is presented. The heat switch has application to a zero-g, no-moving-part magnetic refrigerator that operates between 7 K and 25 K and provides a one-way thermal path for heat rejection from the refrigerator to the 20 K heat sink. Incorporation of the heat switch is dependent on operating frequency. However, the thermal diode operating characteristic and the high axial thermal conductivity of the heat switch provide advantages over other methods. 3 refs., 13 figs., 2 tabs.

Prenger, C.; Stewart, W.

1990-01-01T23:59:59.000Z

220

Structure of an Unusually Small RNA Switch Provides Insight into...  

NLE Websites -- All DOE Office Websites (Extended Search)

Structure of an Unusually Small RNA Switch Provides Insight into the Minimal Requirements for Microbial Gene Regulation The emergence of drug-resistant microbes represents a major...

Note: This page contains sample records for the topic "interrupting switch advanced" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

RITS-3 self-break water switch maintenance.  

Science Conference Proceedings (OSTI)

The radiographic integrated test stand (RITS-3) is a 5-MV, 160-kA, 70-ns inductive voltage adder accelerator at Sandia National Laboratories used to develop critical understanding of x-ray sources and flash radiographic drivers. On RITS-3 three pulse forming lines (PFLs) are used to drive three inductive voltage adder cavities. Each PFL contains a fast-pulse-charged, self-breakdown annular water switch that is used for initial pulse shaping and timing. Low loss in the switches combined with good synchronization is required for efficient operation of the accelerator. Switch maintenance is closely monitored over time to determine the effects of wear on switch breakdown performance.

Cordova, Steve Ray; Portillo, Salvador; Puetz, Elizabeth A.; Wilkins, Frank Lee (Bechtel Nevada, Las Vegas, NV); Gignac, Raymond Edward (Bechtel Nevada, Las Vegas, NV); Johnson, David Lee (Titan Pulse Sciences Division, San Leandro, CA); Hahn, Kelly Denise; Molina, Isidro; Maenchen, John Eric

2004-06-01T23:59:59.000Z

222

Power Switches Utilizing Superconducting Material for Accelerator Magnets  

E-Print Network (OSTI)

Power switches that utilize superconducting material find application in superconducting systems. They can be used for the protection of magnets as a replacement for warm DC breakers, as well as for the replacement of cold diodes. This paper presents a comparison of switches made of various superconducting materials having transport currents of up to 600 A and switching times of the order of milliseconds. The switches operate in the temperature range 4.2-77 K and utilize stainless steel clad YBCO tape and MgB2 tape with a nickel, copper, and iron matrix. Results from simulations and tests are reported.

March, S A; Yang, Y; 10.1109/TASC.2009.2017890

2009-01-01T23:59:59.000Z

223

Robust Diamond-Based RF Switch Yields Enhanced Communication ...  

Meeting the needs of next-generation military and civilian communication systems ... On the other hand, switches using microelectromechanical system technology

224

Open Transport Switch A Software Defined Networking Architecture  

NLE Websites -- All DOE Office Websites (Extended Search)

Open Transport Switch - A Software Defined Networking Architecture for Transport Networks Abhinava Sadasivarao * Sharfuddin Syed * Ping Pan * Chris Liou * Andrew Lake Chin Guok...

225

EVSE Features Power Limiter Switch LED Power Indicator LED...  

NLE Websites -- All DOE Office Websites (Extended Search)

Limiter Switch LED Power Indicator LED Charge Indicator EVSE Specifications Grid connection Plug and cord NEMA 6-50 Connector type J1772 Test lab certifications UL Listed...

226

Transistorized power switch and base drive circuit therefore  

DOE Green Energy (OSTI)

A high power switching circuit is disclosed which utilizes a four-terminal Darlington transistor block to improve switching speed, particularly in rapid turn-off. Two independent reverse drive currents are utilized during turn-off in order to expel the minority carriers of the Darlington pair at their own charge sweep-out rate. The reverse drive current may be provided by a current transformer, the secondary of which is tapped to the base terminal of the power stage of the Darlington block. In one application, the switching circuit is used in each power switching element in a chopper-inverter drive of an electric vehicle propulsion system.

Lee, F.C.; Carter, R.A.

1981-03-24T23:59:59.000Z

227

Reformulations and Algorithms for the Optimization of Switching ...  

E-Print Network (OSTI)

free switching of ports in Simulated Moving Bed processes, [16, 32], time- dependent tray selection in batch distillation processes [30], unconstrained.

228

Advanced Materials in MML  

Science Conference Proceedings (OSTI)

... Advanced Materials Characterization. Fusion Wall Development Research by Neutron Depth Profiling. < Previous 1 2 3 Next . ...

2012-06-12T23:59:59.000Z

229

Coal transportation risks for fuel switching decisions  

SciTech Connect

Coal switching costs are generally expected to be the single largest cost factor associated with switching coals to low-sulfur sources. This report analyzes the principal issues and risks involved in moving Powder River Basin coal to eastern destinations and in moving increased amounts of Central Appalachian low-sulfur coal along the Ohio River. The railroad infrastructure for Powder River Basin coal is essentially optimized for current levels of traffic, yet estimated shipments will expand by 100 million tons over the next ten years. A critical issue is the magnitude and timing of investments in the railroad system required to maintain quality of service. Costs for rail and barge transport are comparable at present, yet they have different abilities to handle increased traffic. Negotiated rates will not be uniform and will change with the dynamics of investments and the clarification of utility compliance plans. Coal traffic patterns on inland waterways will change in order to handle barge movements for both Powder River Basin and Central Appalachian low-sulfur coals. Docks serving Central Appalachian coal fields have ample capacity, but originations will take place increasingly far from the rivers. Potential bottlenecks at specific locks and dams along the Ohio River have been identified. With the barge industry coming out of a slump, future barge rates will depend critically on the Corps of Engineers' schedule to upgrade key facilities. 30 figs., 14 tabs.

Toth, S. (Fieldston Co., Inc., Washington, DC (United States))

1991-09-01T23:59:59.000Z

230

Spark-gap device for precise switching  

DOE Patents (OSTI)

An improved spark gap apparatus is provided for precise switching of high currents from charged capacitors, and for protecting circuitry and circuit components, such as an energy storage capacitor, from overvoltage surges. The invention includes a pair of niobium electrodes with a melting point greater than 2000/sup 0/C that forms the spark gap. The electrodes are supported by conductive caps spaced apart from one another by an insulating member all of which form a hermetically sealed chamber filled with an inert, ionizable gas, preferably pure xenon. The spark gap device includes a quantity of solid radioactive stabilizer, carbon-14, placed within the hermetically sealed chamber adjacent to the spark gap. Methods for fabricating the device and its components are described. It is claimed that use of the Nb electrodes forestalls electrode erosion even under severe voltage and discharge conditions, that, by employing pure Xe gas, and solid carbon-14 radiation stabilizer, it is unnecessary to employ radioactive gases or chemically plated radioactive sources to promote ionization, and that, by selection of a suitable spark gap, a spark gap device is obtained which is capable of switching at 1700 V +- 10% for input voltage rates up to 570 V/ms and allowing peak discharge currents up to 3000 A from a 0.3 microfarad energy storage capacitor for more than 1000 operations. (LCL)

Boettcher, G.E.

1982-01-28T23:59:59.000Z

231

AgentSwitch: towards smart energy tariff selection  

Science Conference Proceedings (OSTI)

In this paper, we present AgentSwitch, a prototype agent-based platform to solve the electricity tariff selection problem. Agent-Switch incorporates novel algorithms to make predictions of hourly energy usage as well as detect (and suggest to the user) ... Keywords: electricity, group buying, optimisation, provenance, recommender systems, smart grid

Sarvapali D. Ramchurn, Michael Osborne, Oliver Parson, Talal Rahwan, Sasan Maleki, Steve Reece, Trung D. Huynh, Muddasser Alam, Joel E. Fischer, Tom Rodden, Luc Moreau, Steve Roberts

2013-05-01T23:59:59.000Z

232

DESIGN AND IMPLEMENTATION OF A PACKET SWITCHED ROUTING CHIP  

Science Conference Proceedings (OSTI)

Monsoon is a parallel processing dataflow computer that will require a high bandwidth interconnection network. A packet switched routing chip (PaRC) is described that will be used as the basis of this network. PaRC is a 4 by 4 routing switch which has ...

C. F. Joerg

1990-12-01T23:59:59.000Z

233

AgentSwitch: towards smart energy tariff selection  

Science Conference Proceedings (OSTI)

We present AgentSwitch, a prototype agent-based platform to solve the tariff selection problem for homeowners. AgentSwitch incorporates novel algorithms that work on the coarse data provided by smart meters to make predictions of hourly energy usage ... Keywords: energy, group buying, provenance, smart grids

Sarvapali D. Ramchurn, Michael A. Osborne, Oliver Parson, Talal Rahwan, Sasan Maleki, Steve Reece, Trung Dong Huynh, Muddasser Alam, Joel E. Fischer, Tom Rodden, Luc Moreau, Steve Roberts

2013-05-01T23:59:59.000Z

234

Terminal models for switching overvoltage studies in electrical machines  

Science Conference Proceedings (OSTI)

In this paper, terminal models for high voltage machine windings are developed. The models are useful for simulating transient overvoltages due to switching operations on industrial installations. The models are based on network synthesis of the winding ... Keywords: electrical parameters, machine winding, network synthesis, switching transients, terminal impedance

J. L. Guardado; V. Venegas; E. Melgoza

2006-03-01T23:59:59.000Z

235

Database of Incidents and Near Misses in Switching  

Science Conference Proceedings (OSTI)

In 2008, EPRI published a Technical Update report, "Database of Incidents and Near Misses in Power Switching" (EPRI report 1016830), which introduced a report format and form designed to allow utilities to submit reports of power switching-related incidents to a shared database. This new report summarizes work performed on the database in 2009.

2009-11-23T23:59:59.000Z

236

Solving the tool switching problem with memetic algorithms  

Science Conference Proceedings (OSTI)

The tool switching problem (ToSP) is well known in the domain of flexible manufacturing systems. Given a reconfigurable machine, the ToSP amounts to scheduling a collection of jobs on this machine (each of them requiring a different set of tools to be ... Keywords: Evolutionary Algorithm, Flexible Manufacturing System, Local Search, Memetic Algorithm, Tool Switching Problem

Jhon edgar Amaya; Carlos Cotta; Antonio j. Fernndez-leiva

2011-10-01T23:59:59.000Z

237

DC switching regulated power supply for driving an inductive load  

DOE Patents (OSTI)

A power supply for driving an inductive load current from a dc power supply hrough a regulator circuit including a bridge arrangement of diodes and switching transistors controlled by a servo controller which regulates switching in response to the load current to maintain a selected load current. First and second opposite legs of the bridge are formed by first and second parallel-connected transistor arrays, respectively, while the third and fourth legs of the bridge are formed by appropriately connected first and second parallel connected diode arrays, respectively. The regulator may be operated in three "stages" or modes: (1) For current runup in the load, both first and second transistor switch arrays are turned "on" and current is supplied to the load through both transistor arrays. (2) When load current reaches the desired level, the first switch is turned "off", and load current "flywheels" through the second switch array and the fourth leg diode array connecting the second switch array in series with the load. Current is maintained by alternating between modes 1 and 2 at a suitable duty cycle and switching rate set by the controller. (3) Rapid current rundown is accomplished by turning both switch arrays "off", allowing load current to be dumped back into the source through the third and fourth diode arrays connecting the source in series opposition with the load to recover energy from the inductive load. The three operating states are controlled automatically by the controller.

Dyer, George R. (Norris, TN)

1986-01-01T23:59:59.000Z

238

A Case Study in Automated Feeder Switching Map Creation  

Science Conference Proceedings (OSTI)

This project's objective was to autogenerate a set of custom paper maps of distribution systems to improve switching, reliability, and customer service. The paper maps were designed as a stop-gap measure to help operators until a long-term solution with a more automated interface that can display recloser and switch loops is developed.

2009-06-30T23:59:59.000Z

239

Methods for Pricing American Options under Regime Switching  

Science Conference Proceedings (OSTI)

We analyze a number of techniques for pricing American options under a regime switching stochastic process. The techniques analyzed include both explicit and implicit discretizations with the focus being on methods which are unconditionally stable. In ... Keywords: American options, iterative methods, regime switching

Y. Huang; P. A. Forsyth; G. Labahn

2011-09-01T23:59:59.000Z

240

Database of Incidents and Near Misses in Power Switching  

Science Conference Proceedings (OSTI)

This report presents the preliminary results of a research task sponsored by EPRI's Power Switching Safety and Reliability (PSS&R) project to develop a report format and form that will allow multiple utilities to submit reports of power switching-related incidents to a shared database.

2008-12-23T23:59:59.000Z

Note: This page contains sample records for the topic "interrupting switch advanced" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Incident-Based Training Modules for Power Switching  

Science Conference Proceedings (OSTI)

This report describes a project undertaken by EPRI's Switching Safety and Reliability Project to develop materials for training in prevention of errors in the conduct of high voltage switching operations. The report describes the general approach taken to developing the training materials and presents all materials (training modules) required for presentation of four lessons. Additional modules are under development.

2009-12-01T23:59:59.000Z

242

Reorientation of linear switched systems using state feedback  

Science Conference Proceedings (OSTI)

A characterisation is obtained for the controlled and conditioned invariants of a linear switched system under feedback. The existence of a maximal consistent subspace with feedback is shown and is computed. A few sufficient conditions under which the ... Keywords: Consistent subspace, Jump subspace, Linear complementarity systems, State feedback, Switched systems, Well-posedness

H. Priyadarshan, Harish K. Pillai

2013-06-01T23:59:59.000Z

243

A comparator-based switched-capacitor pipelined analog-to-digital converter  

E-Print Network (OSTI)

A new comparator-based switched-capacitor(CBSC) technique is proposed that eliminates the need for high gain op-amps in switched-capacitor circuits. The CBSC technique replaces the op-amp in switched-capacitor circuits ...

Fiorenza, John Kenneth, 1977-

2007-01-01T23:59:59.000Z

244

VLAN-based routing infrastructure for an all-optical circuit switched LAN  

Science Conference Proceedings (OSTI)

Exploring the use of all-optical MEM switches on Local Area Network (LAN) to increase bandwidth and reduce energy cost has received increasing attention. Compared to traditional electronic switches, an all-optical switch provides higher bandwidth, less ...

Xiaolan J. Zhang; Rohit Wagle; James Giles

2009-11-01T23:59:59.000Z

245

Design, fabrication and testing of a lateral self-cleaning MEMS switch  

E-Print Network (OSTI)

A lateral contact MEMS switch has been developed to address the need for a long life cycle, low contact resistance RF switch. At the present time, there is no commercial MEMS switch that meets all the requirements. The ...

Shi, Yong, 1965-

2004-01-01T23:59:59.000Z

246

Complexity analysis and algorithm design for advance bandwidth scheduling in dedicated networks  

Science Conference Proceedings (OSTI)

An increasing number of high-performance networks provision dedicated channels through circuit switching or MPLS/GMPLS techniques to support large data transfer. The link bandwidths in such networks are typically shared by multiple users through advance ... Keywords: bandwidth scheduling, dedicated networks, nonapproximable

Yunyue Lin, Qishi Wu

2013-02-01T23:59:59.000Z

247

Sensor Switch's Bright Manufacturing Future | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Sensor Switch's Bright Manufacturing Future Sensor Switch's Bright Manufacturing Future Sensor Switch's Bright Manufacturing Future June 16, 2010 - 12:01pm Addthis Lindsay Gsell It's a simple concept that's saving thousands of dollars in utility bills each year: when a room is empty, turn off the lights. This is the basic concept behind Sensor Switch, a Connecticut-based manufacturer of lighting control products. Sensor Switch's occupancy sensor devices turn off lights when spaces are vacant. They also make devices that dim or turn off lights when sufficient daylight is present. Both types of products provide cost effective energy savings in indoor spaces like office buildings and warehouses. "There's an increasing public demand to save energy, which directly impacts the demand for our products," said Ben Hahn, vice president. "A key part of

248

High Power Microwave Switch Employing Electron Beam Triggering  

Science Conference Proceedings (OSTI)

A new type of switch for modulation of the Q-factor of a multi-mode storage resonator in a high-power active microwave pulse compressor is described. The operating principle of the switch is based on a sharp increase in the TE{sub 02{yields}}TE{sub 01} coupling coefficient, when an electron beam is injected into the switch cavity. The switch was tested at low power level in a compressor operated at X-band. A power gain of 19-20 in the compressed pulse with pulse duration of 40-50 ns was achieved. The proposed switch shows good prospects for use in high-power active pulse compressors.

Ivanov, O. A.; Vikharev, A. L. [Institute of Applied Physics RAS, Nizhny Novgorod, 603600 (Russian Federation); Omega-P, Inc., New Haven, Connecticut 06510 (United States); Isaev, V. A.; Lobaev, M. A. [Institute of Applied Physics RAS, Nizhny Novgorod, 603600 (Russian Federation); Hirshfield, J. L. [Omega-P, Inc., New Haven, Connecticut 06510 (United States); Department of Physics, Yale University, New Haven, Connecticut 06511 (United States)

2010-11-04T23:59:59.000Z

249

Definition: Automated Feeder And Line Switching | Open Energy Information  

Open Energy Info (EERE)

Definition Definition Edit with form History Facebook icon Twitter icon » Definition: Automated Feeder And Line Switching Jump to: navigation, search Dictionary.png Automated Feeder And Line Switching Automated feeder and line switching is realized through automatic isolation and reconfiguration of faulted segments of distribution feeders or transmission lines via sensors, controls, switches, and communications systems. These devices can operate autonomously in response to local events or in response to signals from a central control system.[1] Related Terms transmission lines, transmission line References ↑ SmartGrid.gov 'Description of Functions' An i LikeLike UnlikeLike You like this.Sign Up to see what your friends like. nline Glossary Definition Retrieved from "http://en.openei.org/w/index.php?title=Definition:Automated_Feeder_And_Line_Switching&oldid=480562"

250

Switched Control of Electron Nuclear Spin Systems  

E-Print Network (OSTI)

In this article, we study control of electron-nuclear spin dynamics at magnetic field strengths where the Larmor frequency of the nucleus is comparable to the hyperfine coupling strength. The quantization axis for the nuclear spin differs from the static B_0 field direction and depends on the state of the electron spin. The quantization axis can be switched by flipping the state of electron spin, allowing for universal control on nuclear spin states. We show that by performing a sequence of flips (each followed by a suitable delay), we can perform any desired rotation on the nuclear spins, which can also be conditioned on the state of the electron spin. These operations, combined with electron spin rotations can be used to synthesize any unitary transformation on the coupled electron-nuclear spin system. We discuss how these methods can be used for design of experiments for transfer of polarization from the electron to the nuclear spins.

Navin Khaneja

2007-07-11T23:59:59.000Z

251

Semiconductor switch geometry with electric field shaping  

DOE Patents (OSTI)

An optoelectric switch is disclosed that utilizes a cylindrically shaped and contoured GaAs medium or other optically active semiconductor medium to couple two cylindrically shaped metal conductors with flat and flared termination points each having an ovoid prominence centrally extending there from. Coupling the truncated ovoid prominence of each conductor with the cylindrically shaped optically active semiconductor causes the semiconductor to cylindrically taper to a triple junction circular line at the base of each prominence where the metal conductor conjoins with the semiconductor and a third medium such as epoxy or air. Tapering the semiconductor at the triple junction inhibits carrier formation and injection at the triple junction and thereby enables greater current carrying capacity through and greater sensitivity of the bulk area of the optically active medium.

Booth, Rex (Livermore, CA); Pocha, Michael D. (Livermore, CA)

1994-01-01T23:59:59.000Z

252

Optimal Multi-Modes Switching with the Switching Cost not necessarily Positive  

E-Print Network (OSTI)

In this paper, we study the $m$-states optimal switching problem in finite horizon, when the switching cost functions are arbitrary and can be positive or negative. This has an economic incentive in terms of central evaluation in cases where such organizations or state grants or financial assistance to power plants that promotes green energy in their production activity or what uses less polluting modes in their production. We show existence for optimal strategy via a verification theorem then we show existence and uniqueness of the value processes by using an approximation scheme. In the markovian framework we show that the value processes can be characterized in terms of deterministic continuous functions of the state of the process. Those latter functions are the unique viscosity solutions for a system of $m$ variational partial differential inequalities with inter-connected obstacles.

Asri, Brahim El

2012-01-01T23:59:59.000Z

253

Switching of light with light using cold atoms inside a hollow optical fiber  

E-Print Network (OSTI)

We demonstrate a fiber-optical switch that operates with a few hundred photons per switching pulse. The light-light interaction is mediated by laser-cooled

Bajcsy, M.

254

Nuclear fusion advances  

Science Conference Proceedings (OSTI)

The last decade has seen advances in the shaping and confinement of plasmas, and in approaches to noninductive current drive. Here, the author presents an overview of nuclear fusion advances between 1983-93 examining: fusion milestones; plasma shaping; ...

W. Sweet

1994-02-01T23:59:59.000Z

255

AdvAnced  

NLE Websites -- All DOE Office Websites (Extended Search)

AdvAnced test reActor At the InL advanced Unlike large, commercial power reactors, ATR is a low- temperature, low-pressure reactor. A nuclear reactor is basically an elaborate tool...

256

ADVANCED DATA SECURITY  

Science Conference Proceedings (OSTI)

ADVANCED DATA SECURITY. NVLAP Lab Code: 200968-0. Address and Contact Information: 1933 O'Toole Avenue San ...

2013-11-08T23:59:59.000Z

257

Fatigue of Advanced Materials  

Science Conference Proceedings (OSTI)

Oct 19, 2011... isolate the internal components from the external environment while ... overall thermal efficiency of advanced internal combustion engines...

258

Advancement of Electrochromic Windows  

E-Print Network (OSTI)

advanced spectrally selective low-e double-pane windows and the same type of daylighting control system

2006-01-01T23:59:59.000Z

259

Advanced High Frequency Devices  

Science Conference Proceedings (OSTI)

... External agencies, including the Defense Advanced Research Projects Agency (DARPA) and the Office of Naval Research (ONR), have ...

2010-10-05T23:59:59.000Z

260

Supporting Advanced Communications Networks  

Science Conference Proceedings (OSTI)

... it will rely on revolutionary advances in network architecture. ... telemedicine), sensor and control networks (eg, Smart Grid, environmental monitoring ...

2012-02-13T23:59:59.000Z

Note: This page contains sample records for the topic "interrupting switch advanced" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Session: CSP Advanced Systems -- Advanced Overview (Presentation)  

DOE Green Energy (OSTI)

The project description is: (1) it supports crosscutting activities, e.g. advanced optical materials, that aren't tied to a single CSP technology and (2) it supports the 'incubation' of new concepts in preliminary stages of investigation.

Mehos, M.

2008-04-01T23:59:59.000Z

262

Argonne CNM Highlight: Reverse Chemical Switching of a Ferroelectric Film  

NLE Websites -- All DOE Office Websites (Extended Search)

Reverse Chemical Switching of a Ferroelectric Film Reverse Chemical Switching of a Ferroelectric Film Reverse Chemmical Switching of a Ferroelectric Film Ferroelectric materials display a spontaneous electric polarization below the Curie temperature that can be reoriented, typically by applying an electric field. In this study, researchers from Argonne, Northern Illinois University, and The University of Pennsylvania have demonstrated that the chemical environment can control the polarization orientation in an ultrathin ferroelectric film. This is complementary to recent predictions that polarization can affect surface chemistry and illuminates potential applications in sublithographic patterning and electrically tunable catalysts. In situ synchrotron X-ray scattering measurements showed that high or low

263

Advanced Manufacturing Office: Better Plants  

NLE Websites -- All DOE Office Websites (Extended Search)

Better Plants on Twitter Bookmark Advanced Manufacturing Office: Better Plants on Google Bookmark Advanced Manufacturing Office: Better Plants on Delicious Rank Advanced...

264

Advanced Manufacturing Office: Pump Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Pump Systems on Twitter Bookmark Advanced Manufacturing Office: Pump Systems on Google Bookmark Advanced Manufacturing Office: Pump Systems on Delicious Rank Advanced...

265

Spark gap device for precise switching  

DOE Patents (OSTI)

A spark gap device for precise switching of an energy storage capacitor into an exploding bridge wire load is disclosed. Niobium electrodes having a melting point of 2,415 degrees centrigrade are spaced apart by an insulating cylinder to define a spark gap. The electrodes are supported by conductive end caps which, together with the insulating cylinder, form a hermetically sealed chamber filled with an inert, ionizable gas, such as pure xenon. A quantity of solid radioactive carbon-14 within the chamber adjacent the spark gap serves as a radiation stabilizer. The sides of the electrodes and the inner wall of the insulating cylinder are spaced apart a sufficient distance to prevent unwanted breakdown initiation. A conductive sleeve may envelop the outside of the insulating member from the midpoint of the spark gap to the cap adjacent the cathode. The outer metallic surfaces of the device may be coated with a hydrogen-impermeable coating to lengthen the shelf life and operating life of the device. The device breaks down at about 1,700 volts for input voltage rates up to 570 volts/millisecond and allows peak discharge currents of up to 3,000 amperes from a 0.3 microfarad energy storage capacitor for more than 1,000 operations.

Boettcher, Gordon E. (Albuquerque, NM)

1984-01-01T23:59:59.000Z

266

Spark gap device for precise switching  

DOE Patents (OSTI)

A spark gap device for precise switching of an energy storage capacitor into an exploding bridge wire load is disclosed. Niobium electrodes having a melting point of 2,415 degrees centigrade are spaced apart by an insulating cylinder to define a spark gap. The electrodes are supported by conductive end caps which, together with the insulating cylinder, form a hermetically sealed chamber filled with an inert, ionizable gas, such as pure xenon. A quantity of solid radioactive carbon-14 within the chamber adjacent the spark gap serves as a radiation stabilizer. The sides of the electrodes and the inner wall of the insulating cylinder are spaced apart a sufficient distance to prevent unwanted breakdown initiation. A conductive sleeve may envelop the outside of the insulating member from the midpoint of the spark gap to the cap adjacent the cathode. The outer metallic surfaces of the device may be coated with a hydrogen-impermeable coating to lengthen the shelf life and operating life of the device. The device breaks down at about 1,700 volts for input voltage rates up to 570 volts/millisecond and allows peak discharge currents of up to 3,000 amperes from a 0.3 microfarad energy storage capacitor for more than 1,000 operations. 3 figs.

Boettcher, G.E.

1984-10-02T23:59:59.000Z

267

AlGaN/GaN-based power semiconductor switches  

E-Print Network (OSTI)

AlGaN/GaN-based high-electron-mobility transistors (HEMTs) have great potential for their use as high efficiency and high speed power semiconductor switches, thanks to their high breakdown electric field, mobility and ...

Lu, Bin, Ph. D. Massachusetts Institute of Technology

2013-01-01T23:59:59.000Z

268

Microsoft Word - CX-Hat_Rock_Switch_14June2013  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

7, 2013 7, 2013 REPLY TO ATTN OF: KEC-4 SUBJECT: Environmental Clearance Memorandum Glenn Russell Project Manager -TPCV-TPP-4 Proposed Action: Hat Rock Switching Station Replacement Project Categorical Exclusion Applied (from Subpart D, 10 C.F.R. Part 1021): B4.6 Additions and modifications to transmission facilities Location: Umatilla County, Oregon Proposed by: Bonneville Power Administration (BPA) Description of the Proposed Action: BPA proposes to fund PacifiCorp's rebuild of BPA's Hat Rock Tap Switching Station, which is located within PacifiCorp's McNary-Wallula 230-kilovolt (kV) transmission line right-of-way (ROW). Rebuilding the switching station would include the replacement of sectionalizing switches, the grounding grid, and all signage. The approximately 0.5-acre yard would

269

Throughput-cost analysis of optical flow switching  

E-Print Network (OSTI)

In this paper, we employ a cost model embodying major sources of capital expenditure (CapEx) to compare the throughput-cost tradeoff offered by optical flow switching to that of more traditional optical network architectures.

Chan, Vincent W. S.

270

Electro-mechanical heat switch for cryogenic applications  

DOE Patents (OSTI)

A heat switch includes two symmetric jaws. Each jaw is comprised of a link connected at a translatable joint to a flexible arm. Each arm rotates about a fixed pivot, and has an articulated end including a thermal contact pad connected to a heat sink. The links are joined together at a translatable main joint. To close the heat switch, a closing solenoid is actuated and forces the main joint to an over-center position. This movement rotates the arms about their pivots, respectively, forces each of them into a stressed configuration, and forces the thermal contact pads towards each other and into compressive contact with a cold finger. The closing solenoid is then deactivated. The heat switch remains closed due to a restoring force generated by the stressed configuration of each arm, until actuation of an opening solenoid returns the main joint to its starting open-switch position.

van den Berg, Marcel L. (Oakland, CA); Batteux, Jan D. (Hayward, CA); Labov, Simon E. (Berkeley, CA)

2003-01-01T23:59:59.000Z

271

SLAC National Accelerator Laboratory - Rapid Beam-switching Allows...  

NLE Websites -- All DOE Office Websites (Extended Search)

Rapid Beam-switching Allows SLAC X-ray Laser to Multitask By Glenn Roberts Jr. August 9, 2013 A high-energy SLAC laser that creates shock waves and superhot plasmas needs to cool...

272

High efficiency switching-mode amplifiers for wireless communication systems  

E-Print Network (OSTI)

minimizing the power consumption of the mobile devices is adevice as a switch, the amplifier can minimize the power consumption.devices require higher transmit-and-receive rates, resulting in greater power consumption

Hung, Tsai-Pi

2008-01-01T23:59:59.000Z

273

Switching surge test results ehv substation bus configurations  

SciTech Connect

The industry has been actively engaged in, and has presented many results of, ehv switching surge test programs associated with transmission line designs. It would seem equally important that similar efforts be staged relative to ehv switching surge capabilities of the terminal equipment as it would normally be found in its variety of configurations. Toward this end, a series of switching surge test programs on a number of substation bus configurations was conducted. Particular emphasis was placed on the determination of switching surge characteristics of the air gaps found in ehv substation bus designs. The test data are presented with pertinent data evaluations in an attempt to provide a more refined basis for the application of final judgments to bus designs for 345, 500, and 750 kV substations.

Hertig, G.E.; Kelly, W.B.

1966-08-01T23:59:59.000Z

274

Development of a high-explosive driven crowbar switch  

DOE Green Energy (OSTI)

A compact explosively-driven, metal-to-metal contact, solid dielectric switch was developed for use as a low-resistance, <10- mu OMEGA , low- inductance, < 10-nH, crowbar switch. A l00-milligram high-explosive charge is used to extrude a 0.090-in. plate through 0.040-in. polyethylene and achieve a hard current contact with a 0.625-in.-diameter die plate. The closure time, from the signal, which initiates the charge, to beginning of current rise in the switch, is 11.0 mu sec plus or minus 0.3 mu sec. In crowbar application the switch has carried 180 to 330 kA, which decays with a 1/e time of approximately 1.2 msec. (auth)

Dike, R.S.; Kewish, R.W. Jr.

1973-01-01T23:59:59.000Z

275

Bayesian Nonparametric Methods for Learning Markov Switching Processes  

E-Print Network (OSTI)

In this article, we explored a Bayesian nonparametric approach to learning Markov switching processes. This framework requires one to make fewer assumptions about the underlying dynamics, and thereby allows the data to ...

Fox, Emily Beth

276

Scheduling in switched queueing networks with heavy-tailed trac  

E-Print Network (OSTI)

We study scheduling problems arising in switched queueing networks, a class of stochastic systems that are often used to model data communication networks, such as uplinks and downlinks of cellular networks, networks of ...

Markakis, Mihalis G

2013-01-01T23:59:59.000Z

277

Electronically commutated serial-parallel switching for motor windings  

Science Conference Proceedings (OSTI)

A method and a circuit for controlling an ac machine comprises controlling a full bridge network of commutation switches which are connected between a multiphase voltage source and the phase windings to switch the phase windings between a parallel connection and a series connection while providing commutation discharge paths for electrical current resulting from inductance in the phase windings. This provides extra torque for starting a vehicle from lower battery current.

Hsu, John S. (Oak Ridge, TN)

2012-03-27T23:59:59.000Z

278

Incident-Based Training Modules for Power Switching  

Science Conference Proceedings (OSTI)

This report describes a second phase of the project undertaken in 2009 by EPRI's Switching Safety and Reliability Project to develop a comprehensive set of training materials designed to reinforce behaviorsprincipally strict procedural compliancethat make errors less likely to occur in the conduct of power switching operations. The report describes the general approach taken to developing the training materials and the 11 modules produced to date. The additional training material are attached to the main...

2010-12-08T23:59:59.000Z

279

Advanced Manufacturing Office: Technical Assistance  

NLE Websites -- All DOE Office Websites (Extended Search)

Assistance on Twitter Bookmark Advanced Manufacturing Office: Technical Assistance on Google Bookmark Advanced Manufacturing Office: Technical Assistance on Delicious Rank...

280

Advanced Manufacturing Office: Financial Opportunities  

NLE Websites -- All DOE Office Websites (Extended Search)

on Twitter Bookmark Advanced Manufacturing Office: Financial Opportunities on Google Bookmark Advanced Manufacturing Office: Financial Opportunities on Delicious Rank...

Note: This page contains sample records for the topic "interrupting switch advanced" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Advance Network Reservation and Provisioning for Science  

Science Conference Proceedings (OSTI)

We are witnessing a new era that offers new opportunities to conduct scientific research with the help of recent advancements in computational and storage technologies. Computational intensive science spans multiple scientific domains, such as particle physics, climate modeling, and bio-informatics simulations. These large-scale applications necessitate collaborators to access very large data sets resulting from simulations performed in geographically distributed institutions. Furthermore, often scientific experimental facilities generate massive data sets that need to be transferred to validate the simulation data in remote collaborating sites. A major component needed to support these needs is the communication infrastructure which enables high performance visualization, large volume data analysis, and also provides access to computational resources. In order to provide high-speed on-demand data access between collaborating institutions, national governments support next generation research networks such as Internet 2 and ESnet (Energy Sciences Network). Delivering network-as-a-service that provides predictable performance, efficient resource utilization and better coordination between compute and storage resources is highly desirable. In this paper, we study network provisioning and advanced bandwidth reservation in ESnet for on-demand high performance data transfers. We present a novel approach for path finding in time-dependent transport networks with bandwidth guarantees. We plan to improve the current ESnet advance network reservation system, OSCARS [3], by presenting to the clients, the possible reservation options and alternatives for earliest completion time and shortest transfer duration. The Energy Sciences Network (ESnet) provides high bandwidth connections between research laboratories and academic institutions for data sharing and video/voice communication. The ESnet On-Demand Secure Circuits and Advance Reservation System (OSCARS) establishes guaranteed bandwidth of secure virtual circuits at a certain time, for a certain bandwidth and length of time. Though OSCARS operates within the ESnet, it also supplies end-to-end provisioning between multiple autonomous network domains. OSCARS gets reservation requests through a standard web service interface, and conducts a Quality-of-service (QoS) path for bandwidth guarantees. Multi-protocol Label Switching (MPLS) and the Resource Reservation Protocol (RSVP) enable to create a virtual circuit using Label Switched Paths (LSP's). It contains three main components: a reservation manager, a bandwidth scheduler, and a path setup subsystem. The bandwidth scheduler needs to have information about the current and future states of the network topology in order to accomplish end-to-end bandwidth guaranteed paths.

Balman, Mehmet; Chaniotakis, Evangelos; Shoshani, Arie; Sim, Alex

2009-07-10T23:59:59.000Z

282

Efficient Switches for Solar Power Conversion: Four Quadrant GaN Switch Enabled Three Phase Grid-Tied Microinverters  

Science Conference Proceedings (OSTI)

Solar ADEPT Project: Transphorm is developing power switches for new types of inverters that improve the efficiency and reliability of converting energy from solar panels into useable electricity for the grid. Transistors act as fast switches and control the electrical energy that flows in an electrical circuit. Turning a transistor off opens the circuit and stops the flow of electrical current; turning it on closes the circuit and allows electrical current to flow. In this way a transistor can be used to convert DC from a solar panel into AC for use in a home. Transphorms transistors will enable a single semiconductor device to switch electrical currents at high-voltage in both directionsmaking the inverter more compact and reliable. Transphorm is using Gallium Nitride (GaN) as a semiconductor material in its transistors instead of silicon, which is used in most conventional transistors, because GaN transistors have lower losses at higher voltages and switching frequencies.

None

2012-02-13T23:59:59.000Z

283

Advanced Concepts Breakout Group  

NLE Websites -- All DOE Office Websites (Extended Search)

Workshop Workshop Advanced Concepts Working Group Facilitator: John J. Petrovic Scribe: Sherry Marin Advanced Storage Techniques/ Approaches in Priority Order 1. Crystalline Nanoporous Materials (15) 2. Polymer Microspheres (12) Self-Assembled Nanocomposites (12) 3. Advanced Hydrides (11) Metals - Organic (11) 4. BN Nanotubes (5) Hydrogenated Amorphous Carbon (5) 5. Mesoporous materials (4) Bulk Amorphous Materials (BAMs) (4) 6. Iron Hydrolysis (3) 7. Nanosize powders (2) 8. Metallic Hydrogen (1) Hydride Alcoholysis (1) Overarching R&D Questions for All Advanced Materials * Maximum storage capacity - theoretical model * Energy balance / life cycle analysis * Hydrogen absorption / desorption kinetics * Preliminary cost analysis - potential for low cost, high

284

Institute for Advanced Studies  

NLE Websites -- All DOE Office Websites (Extended Search)

Institute for Advanced Studies Institute for Advanced Studies Institute for Advanced Studies NMC leverages the strengths of three research universities to build joint programs, develop strategic partnerships, provide common organization and facilities. Contact Leader TBD LANL Program Administrator Pam Hundley (505) 663-5453 Email Building regional partnerships in education, leveraging strengths of three research universities The Institute for Advanced Studies (IAS) works with the three New Mexico research universities (University of New Mexico, New Mexico Tech, and New Mexico State University) to develop research and educational collaborations and partnerships. To facilitate interactions between the universities and LANL, the three New Mexico schools established the New Mexico Consortium (NMC), a nonprofit

285

Advanced Materials | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Research Areas Research Areas Research Highlights Facilities and Capabilities Science to Energy Solutions News & Awards Events and Conferences Supporting Organizations Directionally Solidified Materials Using high-temperature optical floating zone furnace to produce monocrystalline molybdenum alloy micro-pillars Home | Science & Discovery | Advanced Materials Advanced Materials | Advanced Materials SHARE ORNL has the nation's most comprehensive materials research program and is a world leader in research that supports the development of advanced materials for energy generation, storage, and use. We have core strengths in three main areas: materials synthesis, characterization, and theory. In other words, we discover and make new materials, we study their structure,

286

Advanced Research Materials Program  

NLE Websites -- All DOE Office Websites (Extended Search)

materials requirements for all fossil energy systems, including materials for advanced power generation and coal fuels technologies. Examples of these technologies include coal...

287

Project: Advanced Fire Detection  

Science Conference Proceedings (OSTI)

... residential fire deaths through development of measurement ... Beyond advances in sensing technologies, a key ... data will be used to develop and test ...

2013-05-30T23:59:59.000Z

288

advance meeting brochure  

Science Conference Proceedings (OSTI)

May 23, 1999 ... Ponte Vedra Beach, Florida, USA. ADVANCE PROGRAM ..... but she has two enclosed glass-sided decks, an out- side balcony and the...

289

Brochures | Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

Podcasts Image Gallery external site Video Library Syndicated Feeds (RSS) The Advanced Photon Source: Lighting the Way to a Better Tomorrow aps brochure The APS helps...

290

Divisions | Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

Chart Argonne Research Divisions APS Research Divisions In May 2002, The Advanced Photon Source was reorganized into three divisions: the Accelerator Systems Division...

291

Advanced Mixing Models  

Propose mixing indicators. Turbulence kinetic energy ... (Turbulence intensity observed at Point 8 in Tank B & C) Advanced Mixing Models. Computational Sciences. 13.

292

Advancement in Battery Materials  

Science Conference Proceedings (OSTI)

Oct 18, 2010 ... Advanced Electrochemical Storage for Renewable Integration and Utility Applications: Zhenguo "Gary" Yang1; Dawon Choi1; Gordon Graff1;...

293

OpenADR Advances  

NLE Websites -- All DOE Office Websites (Extended Search)

Volume 54 Issue 11 Date Published 112012 Keywords communication and standards, openadr, smart grid Abstract An important goal for the advancement of smart grid deployments is to...

294

DOE Advanced Protection Project  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Task 3 - Advanced Protection - Evaluate measures - 2009 - Design, model Irvine Smart Grid Demo protection system - 2010 6 Copyright 2010, Southern California Edison Task 1 -...

295

Advanced Optical Materials for Daylighting in Office Buildings  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Optical Materials for Daylighting in Office Buildings Advanced Optical Materials for Daylighting in Office Buildings Title Advanced Optical Materials for Daylighting in Office Buildings Publication Type Conference Paper LBNL Report Number LBL-20080 Year of Publication 1985 Authors Johnson, Russell, Deborah J. Connell, Stephen E. Selkowitz, and Dariush K. Arasteh Conference Name 10th Passive Solar Conference Date Published 10/1985 Conference Location Raleigh, NC Call Number LBL-20080 Abstract The use of daylighting to supplant electric light in office buildings offers substantial energy savings and peak electrical demand reductions. The benefits from electric lighting reductions can, however, be easily offset by increased cooling loads if solar gains are not controlled.sThe use of advanced glazing materials having optical switching propertiesscan facilitate solar control and, with proper design, maximize energy and cost benefits. The potential net annual performance of these materials, based on simulation studies using DOE-2.1C, are discussed insthis paper. Actively and passively controlled response functions aresanalyzed for the cooling-load-dominated climate of Lake Charles. The effects of advanced materials on net annual energy consumption, peak electrical demand, and chiller size are compared with those of conventional materials. The results demonstrate the importance of operable solar control to achieve energy-effective daylighting design. Advanced optical materials that provide the necessary level of control are shown to minimize peak electrical demand and electricity consumption.

296

Coordinated Variable Structure Switching Attacks for Smart Grid  

E-Print Network (OSTI)

The effective modeling and analysis of large-scale power system disturbances especially those stemming from intentional attack represents an open engineering and research problem. Challenges stem from the need to develop intelligent models of cyber-physical attacks that produce salient disruptions and appropriately describe meaningful cyber-physical interdependencies such that they balance precision, scale and complexity. In our research, we present a foundation for the development of a class of intelligent cyber-physical attacks termed coordinated variable structure switching attacks whereby opponents aim to destabilize the power grid through con- trolled switching sequence. Such switching is facilitated by cyber-attack and corruption of communication channels and control signals of the associated switch(es). We provide methods and theorems to construct such attack models and demonstrate their utility in the simulation of extensive system disturbances. Our proposed class of cyber-physical switching attacks for smart grid systems has the potential to disrupt large-scale power system operation within a short interval of time. Through successful cyber intrusion, an opponent can remotely apply a state- dependent coordinated switching sequence on one or more relays and circuit breakers of a power system to disrupt operation. Existence of this switching vulnerability is dependent on the local structure of the power grid. Variable structure systems theory is employed to effectively model the cyber-physical aspects of a smart grid and determine the existence of the vulnerability and construct the destabilizing switching attack sequence. We illustrate the utility of the attack approach assess its impact on the different power system test cases including the single machine infinite bus power system model and the Western Electricity Coordinating Council (WECC) 3-machine 9-bus system through MATLAB/Simulink and PSCAD simulation environment. The results demonstrate the potential of our approach for practical attack. Moreover, we build on our work in several ways. First, we extend the research to demonstrate an approach to mitigation within the variable structure system frame- work. We demonstrate via small signal analysis how through persistent switching a stable sliding mode can be used to disrupt a dynamical system that seems stable. We also design an approach to vulnerability analysis to assess the feasibility of co-ordinated variable structure switching attacks. Moreover, we study the performance of our attack construction approach when the opponent has imperfect knowledge of the local system dynamics and partial knowledge of the generator state. Based on the system with modeling errors, we study the performance of coordinated variable structure switching attacks in the presence of state estimation. Finally, we illustrate the concepts of attack model within the multiple switching framework, the cascading failure analysis is employed in the New-England 10-machine, 39-bus power system using MATLAB/Simulink and DSATools simulation environment. Our results demonstrate the potential for coordinated variable structure switching attacks to enable large-scale power system disturbances.

Liu, Shan

2013-05-01T23:59:59.000Z

297

Simulated in situ retorting of oil shale in a controlled-state retort. I. Nitrogen atmosphere, interrupted runs  

DOE Green Energy (OSTI)

A series of experiments has been performed on Green River oil shale using the controlled-state retort, an electrically heated retort designed to simulate in situ retorting. Each experiment described was stopped when only part of the shale bed had been completely retorted. Retorting parameters investigated include heating rate, retorting advance rate, gas input flow rate, and maximum temperature. Oils were washed and bitumens were extracted from the partially retorted and unretorted oil shales. The oils and bitumens were examined by simulated distillation gas chromatography, the product gases were analyzed by mass spectroscopy, and the shales were subjected to elemental analysis. Results of the various analyses are presented and conclusions are drawn from the data concerning the way the product oil moves through the bed of unretorted shale. The effects of temperature, heating rate, gas flow rate, and breadth of retorting zone on oil film thickness and bitumen content; the effect of heating rate on organic carbon content in the retorted shale; and the effect breadth of retorting zone has on the boiling point distribution of oils and bitumens as related to distance from the retorting zone are discussed.

Duvall, J.J.

1979-09-01T23:59:59.000Z

298

Kansas Advanced Semiconductor Project  

SciTech Connect

KASP (Kansas Advanced Semiconductor Project) completed the new Layer 0 upgrade for D0, assumed key electronics projects for the US CMS project, finished important new physics measurements with the D0 experiment at Fermilab, made substantial contributions to detector studies for the proposed e+e- international linear collider (ILC), and advanced key initiatives in non-accelerator-based neutrino physics.

Baringer, P.; Bean, A.; Bolton, T.; Horton-Smith, G.; Maravin, Y.; Ratra, B.; Stanton, N.; von Toerne, E.; Wilson, G.

2007-09-21T23:59:59.000Z

299

Advanced Fuels Synthesis  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Fuels Synthesis Advanced Fuels Synthesis Coal and Coal/Biomass to Liquids Advanced Fuels Synthesis The Advanced Fuels Synthesis Key Technology is focused on catalyst and reactor optimization for producing liquid hydrocarbon fuels from coal/biomass mixtures, supports the development and demonstration of advanced separation technologies, and sponsors research on novel technologies to convert coal/biomass to liquid fuels. Active projects within the program portfolio include the following: Fischer-Tropsch fuels synthesis Small Scale Coal Biomass Liquids Production Using Highly Selective Fischer Tropsch Catalyst Small Scale Pilot Plant for the Gasification of Coal and Coal/Biomass Blends and Conversion of Derived Syngas to Liquid Fuels Via Fischer-Tropsch Synthesis Coal Fuels Alliance: Design and Construction of Early Lead Mini Fischer-Tropsch Refinery

300

Ferroelectric opening switches for large-scale pulsed power drivers.  

DOE Green Energy (OSTI)

Fast electrical energy storage or Voltage-Driven Technology (VDT) has dominated fast, high-voltage pulsed power systems for the past six decades. Fast magnetic energy storage or Current-Driven Technology (CDT) is characterized by 10,000 X higher energy density than VDT and has a great number of other substantial advantages, but it has all but been neglected for all of these decades. The uniform explanation for neglect of CDT technology is invariably that the industry has never been able to make an effective opening switch, which is essential for the use of CDT. Most approaches to opening switches have involved plasma of one sort or another. On a large scale, gaseous plasmas have been used as a conductor to bridge the switch electrodes that provides an opening function when the current wave front propagates through to the output end of the plasma and fully magnetizes the plasma - this is called a Plasma Opening Switch (POS). Opening can be triggered in a POS using a magnetic field to push the plasma out of the A-K gap - this is called a Magnetically Controlled Plasma Opening Switch (MCPOS). On a small scale, depletion of electron plasmas in semiconductor devices is used to affect opening switch behavior, but these devices are relatively low voltage and low current compared to the hundreds of kilo-volts and tens of kilo-amperes of interest to pulsed power. This work is an investigation into an entirely new approach to opening switch technology that utilizes new materials in new ways. The new materials are Ferroelectrics and using them as an opening switch is a stark contrast to their traditional applications in optics and transducer applications. Emphasis is on use of high performance ferroelectrics with the objective of developing an opening switch that would be suitable for large scale pulsed power applications. Over the course of exploring this new ground, we have discovered new behaviors and properties of these materials that were here to fore unknown. Some of these unexpected discoveries have lead to new research directions to address challenges.

Brennecka, Geoffrey L.; Rudys, Joseph Matthew; Reed, Kim Warren; Pena, Gary Edward; Tuttle, Bruce Andrew; Glover, Steven Frank

2009-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "interrupting switch advanced" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

A high average power electro-optic switch using KTP  

SciTech Connect

High damage threshold, high thermal conductivity, and small thermo-optic coefficients make KTiOPO{sub 4} (KTP) an attractive material for use in a high average power Q-switch. However, electro-chromic damage and refractive index homogeneity have prevented the utilization of KTP in such a device in the past. This work shows that electro-chromic damage is effectively suppressed using capacitive coupling, and a KTP crystal can be Q-switched for 1.5 {times} 10{sup 9} shots without any detectable electro-chromic damage. In addition, KTP with the high uniformity and large aperture size needed for a KTP electro-optic Q-switch can be obtained from flux crystals grown at constant temperature. A thermally compensated, dual crystal KTP Q-switch, which successfully produced 50 mJ pulses with a pulse width of 8 ns (FWHM), has been constructed. In addition, in off-line testing the Q-switch showed less than 7% depolarization at an average power loading of 3.2 kW/cm{sup 2}.

Ebbers, C.A.; Cook, W.M.; Velsko, S.P.

1994-04-01T23:59:59.000Z

302

0.35 ?m CMOS T/R Switch for 2.4 GHz Short Range Wireless Applications  

Science Conference Proceedings (OSTI)

This paper describes the design and implementation of a transmit/receive switch for 2.4 GHz ISM band applications. The T/R switch is implemented in a 0.35 ?m bulk CMOS process and it occupies 150 ?m 170 ?m of die area. A parasitic MOSFET ... Keywords: MOSFET switch, RF CMOS, SPDT switch, T/R switch

Christian Hove; Janus Lysholm Faaborg; Michael Bohl Jenner; Saska Lindfors

2004-01-01T23:59:59.000Z

303

National Lab 'Flips Switch' on East Coast's Largest Solar Array |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

National Lab 'Flips Switch' on East Coast's Largest Solar Array National Lab 'Flips Switch' on East Coast's Largest Solar Array National Lab 'Flips Switch' on East Coast's Largest Solar Array November 21, 2011 - 12:16pm Addthis An aerial view of the 32-megawatt photovoltaic array of the Long Island Solar Farm, which will produce enough energy to power up to 4,500 local homes. The central Brookhaven National Laboratory campus is seen at left. An aerial view of the 32-megawatt photovoltaic array of the Long Island Solar Farm, which will produce enough energy to power up to 4,500 local homes. The central Brookhaven National Laboratory campus is seen at left. Liisa O'Neill Liisa O'Neill Former New Media Specialist, Office of Public Affairs What are the key facts? The 32-megawatt Long Island Solar Farm Project will produce enough

304

National Lab 'Flips Switch' on East Coast's Largest Solar Array |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Lab 'Flips Switch' on East Coast's Largest Solar Array Lab 'Flips Switch' on East Coast's Largest Solar Array National Lab 'Flips Switch' on East Coast's Largest Solar Array November 21, 2011 - 12:16pm Addthis An aerial view of the 32-megawatt photovoltaic array of the Long Island Solar Farm, which will produce enough energy to power up to 4,500 local homes. The central Brookhaven National Laboratory campus is seen at left. An aerial view of the 32-megawatt photovoltaic array of the Long Island Solar Farm, which will produce enough energy to power up to 4,500 local homes. The central Brookhaven National Laboratory campus is seen at left. Liisa O'Neill Liisa O'Neill Former New Media Specialist, Office of Public Affairs What are the key facts? The 32-megawatt Long Island Solar Farm Project will produce enough

305

Geothermal Switch Pays Off For Connecticut Business | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Geothermal Switch Pays Off For Connecticut Business Geothermal Switch Pays Off For Connecticut Business Geothermal Switch Pays Off For Connecticut Business March 11, 2010 - 12:11pm Addthis Connecticut Wells at work installing a geothermal system. | Photo courtesy of Connecticut Wells Connecticut Wells at work installing a geothermal system. | Photo courtesy of Connecticut Wells Connecticut Wells has gone through many changes since its inception in the 1960s. One of the most significant is its transformation into a thriving geothermal well-drilling business. In the beginning, the small business drilled water wells throughout Connecticut. It was the main source of revenue for the company, "There was a big demand for many years but when building construction declined in the mid-80s, so did the demand for water wells," says president Anthony

306

Spark gap switch system with condensable dielectric gas  

DOE Patents (OSTI)

A spark gap switch system is disclosed which is capable of operating at a high pulse rate comprising an insulated switch housing having a purging gas entrance port and a gas exit port, a pair of spaced apart electrodes each having one end thereof within the housing and defining a spark gap therebetween, an easily condensable and preferably low molecular weight insulating gas flowing through the switch housing from the housing, a heat exchanger/condenser for condensing the insulating gas after it exits from the housing, a pump for recirculating the condensed insulating gas as a liquid back to the housing, and a heater exchanger/evaporator to vaporize at least a portion of the condensed insulating gas back into a vapor prior to flowing the insulating gas back into the housing.

Thayer, III, William J. (Kent, WA)

1991-01-01T23:59:59.000Z

307

Active RF Pulse Compression Using An Electrically Controlled Semiconductor Switch  

SciTech Connect

First we review the theory of active pulse compression systems using resonant delay lines. Then we describe the design of an electrically controlled semiconductor active switch. The switch comprises an active window and an overmoded waveguide three-port network. The active window is based on a four-inch silicon wafer which has 960 PIN diodes. These are spatially combined in an overmoded waveguide. We describe the philosophy and design methodology for the three-port network and the active window. We then present the results of using this device to compress 11.4 GHz RF signals with high compression ratios. We show how the system can be used with amplifier like sources, in which one can change the phase of the source by manipulating the input to the source. We also show how the active switch can be used to compress a pulse from an oscillator like sources, which is not possible with passive pulse compression systems.

Guo, Jiquan; Tantawi, Sami; /SLAC

2007-01-10T23:59:59.000Z

308

Stochastic Switching Games and Duopolistic Competition in Emissions Markets  

E-Print Network (OSTI)

We study optimal behavior of energy producers under a CO_2 emission abatement program. We focus on a two-player discrete-time model where each producer is sequentially optimizing her emission and production schedules. The game-theoretic aspect is captured through a reduced-form price-impact model for the CO_2 allowance price. Such duopolistic competition results in a new type of a non-zero-sum stochastic switching game on finite horizon. Existence of game Nash equilibria is established through generalization to randomized switching strategies. No uniqueness is possible and we therefore consider a variety of correlated equilibrium mechanisms. We prove existence of correlated equilibrium points in switching games and give a recursive description of equilibrium game values. A simulation-based algorithm to solve for the game values is constructed and a numerical example is presented.

Ludkovski, Michael

2010-01-01T23:59:59.000Z

309

Graphene-based plasmonic switches at near infrared frequencies  

E-Print Network (OSTI)

The concept, analysis, and design of series switches for graphene-strip plasmonic waveguides at near infrared frequencies are presented. Switching is achieved by using graphene's field effect to selectively enable or forbid propagation on a section of the graphene strip waveguide, thereby allowing good transmission or high isolation, respectively. The electromagnetic modeling of the proposed structure is performed using full-wave simulations and a transmission line model combined with a matrix-transfer approach, which takes into account the characteristics of the plasmons supported by the different graphene-strip waveguide sections of the device. The performance of the switch is evaluated versus different parameters of the structure, including surrounding dielectric media, electrostatic gating and waveguide dimensions.

Gomez-Diaz, J S

2013-01-01T23:59:59.000Z

310

Zero-switching-loss inverters for high-power applications  

SciTech Connect

The development of zero-switching-loss inverters has attracted much interest for industrial applications. The resonant dc link inverter (RDCLI) provides a simple and robust approach for realizing switching frequencies >20 kHz in multi-kilowatt systems but impresses substantial voltage stress (-- 2.5 supply voltage) across the devices. Two alternate topologies for realizing zero switching losses in high-power converters are proposed. The actively clamped resonant dc-link inverter (ACRLI) uses the concept of a lossless active clamp to restrict voltage stresses to only 1.3-1.5 supply voltage (V/sub s/) while maintaining a mode of operation similar to the RDCLI. For applications demanding substantially superior spectral performance, the resonant pole inverter (RPI), also called the quasi-resonant current mode inverter (QRCMI), is proposed as a viable topology. Detailed analysis, simulation, and experimental results are presented to verify operation principles of both power converters.

Divan, D.M.; Skibinski, G. (Wisconsin Univ., Madison, WI (USA). Dept. of Electrical and Computer Engineering)

1989-07-01T23:59:59.000Z

311

Dynamic Switching of the Spin Circulation in Tapered Magnetic Nanodisks  

NLE Websites -- All DOE Office Websites (Extended Search)

Dynamic Switching of the Spin Dynamic Switching of the Spin Circulation in Tapered Magnetic Nanodisks Dynamic Switching of the Spin Circulation in Tapered Magnetic Nanodisks Print Monday, 22 April 2013 12:09 fischer-magnetic vortices Ferromagnetic NiFe disks (500-nm-wide and 20-nm-thick), were fabricated by e-beam lithography onto a waveguide structure. Field pulses, generated by launching current pulses into the waveguide trigger the magnetization dynamics in the elements. Using the soft x-ray microscope XM-1 providing 25-nm spatial resolution, circularly polarized soft x-rays give rise to XMCD contrast which allows to record an image of the in-plane circulation of the magnetic vortex. The topology of vortices-areas where there is a spinning motion around an imaginary axis-is a physical phenomenon which is found across a large

312

The 4X6 network: A new power switching scheme  

SciTech Connect

This paper describes a new power delivery switching concept which is patented in the USA and Canada. The basic network has 4 nodes and 6 branches and so is called a 4 x 6 switching network. For larger substations, it has substantial advantages over the traditional double breaker, breaker and one-half, and breaker and one-third: up to 40% fewer breakers; higher reliability; and reduced station area in some cases. For some applications, it can provide lower short-circuit levels and bus ampacity ratings thorugh the judicious use of normally open circuit breakers. The concept is applicable to all types of conventional switchgear including SF6.

Page, R.; Nishikawara, K.; Stromotich, F. (Substation Planning Associates, West Vancouver, B.C. (CA))

1989-10-01T23:59:59.000Z

313

High-Power Microwave Switch Employing Electron Beam Triggering  

Science Conference Proceedings (OSTI)

A high-power active microwave pulse compressor is described that modulates the quality factor Q of the energy storage cavity by a new means involving mode conversion controlled by a triggered electron-beam discharge through a switch cavity. The electron beam is emitted from a diamond-coated molybdenum cathode. This report describes the principle of operation, the design of the switch, the configuration used for the test, and the experimental results. The pulse compressor produced output pulses with 140 - ??165 MW peak power, power gain of 16 - 20, and pulse duration of 16 - 20 ns at a frequency of 11.43 GHz.

Jay L. Hirshfield

2012-09-19T23:59:59.000Z

314

Charging characteritiscs of ultrananocrystalline diamond in RF MEMS capacitive switches.  

SciTech Connect

Modifications to a standard capacitive MEMS switch process have been made to allow the incorporation of ultra-nano-crystalline diamond as the switch dielectric. The impact on electromechanical performance is minimal. However, these devices exhibit uniquely different charging characteristics, with charging and discharging time constants 5-6 orders of magnitude quicker than conventional materials. This operation opens the possibility of devices which have no adverse effects of dielectric charging and can be operated near-continuously in the actuated state without significant degradation in reliability.

Sumant, A. V.; Goldsmith, C.; Auciello, O.; Carlisle, J.; Zheng, H.; Hwang, J. C. M.; Palego, C.; Wang, W.; Carpick, R.; Adiga, V.; Datta, A.; Gudeman, C.; O'Brien, S.; Sampath, S.

2010-05-01T23:59:59.000Z

315

NETL: Advanced Research  

NLE Websites -- All DOE Office Websites (Extended Search)

AR AR Coal and Power Systems Advanced Research 12.11.13: Request for Information entitled "Novel Crosscutting Research and Development to Support Advanced Energy Systems". Application due date is January 15, 2014. The RFI and/or instructions can be found on the FedConnect site at FedConnect. Achieving Successes in High Performance Materials, Coal Utilization Sciences, Sensors & Controls Innovations, Computational Energy Sciences, Cooperative Research and Development, and sponsoring Education Initiatives. The Advanced Research (AR) program within NETL's Office of Coal and Power Systems fosters the development of innovative, cost-effective technologies for improving the efficiency and environmental performance of advanced coal and power systems. In addition, AR bridges the gap between fundamental

316

Advanced Chlorophyll Fluorometer  

To advance miniaturization of the AquaSentinel environmental monitoring technology, ORNL and the University of Tennessee researchers developed a microfluidics-based pulse amplitude modulation (PAM) chlorophyll fluorometerthe first of its ...

317

Advancement of Electrochromic Windows  

E-Print Network (OSTI)

Research Energy Systems Integration Advancement ofintegration issues related to using EC windows within a whole building energy efficient systemenergy- savings benefit with EC-daylighting-HVAC integration (assuming a conventional VAV system

2006-01-01T23:59:59.000Z

318

Advanced Cathode Catalysts  

NLE Websites -- All DOE Office Websites (Extended Search)

Fuel Cell Research 1 HFCIT Program Kick-off Meeting, Arlington, VA, February 13-14, 2007 Program Kick-off Meeting Arlington, Virginia, February 13-14, 2007 Advanced Cathode...

319

Search Asia Advanced Search  

E-Print Network (OSTI)

Asia Times Search Asia Times Advanced Search Southeast Asia Malaysia tackles illegal logging:52:14 AM Search #12;Asia Times illegal logging," he said, adding that nine Malaysians had been arrested

320

Search Asia Advanced Search  

E-Print Network (OSTI)

Asia Times Search Asia Times Advanced Search Southeast Asia Indonesia looks to curb log smuggling.html (1 of 2)9/4/2007 12:59:34 PM Search #12;Asia Times No material from Asia Times Online may

Note: This page contains sample records for the topic "interrupting switch advanced" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

About | Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

the APS Welcome to the Advanced Photon Source Here you will find an introduction and tour of the facility, as well as information about the organizations and opportunities at...

322

Nanostructured Materials for Advanced  

E-Print Network (OSTI)

of electric vehicles (EVs) and hybrid electric vehicles (HEVs). High energy and high power densitiesT Nanostructured Materials for Advanced Li-Ion Rechargeable Batteries THE RECENT INCREASE IN demand

Cao, Guozhong

323

Advanced drilling systems study  

DOE Green Energy (OSTI)

This work was initiated as part of the National Advanced Drilling and Excavation Technologies (NADET) Program. It is being performed through joint finding from the Department of Energy Geothermal Division and the Natural Gas Technology Branch, Morgantown Energy Technology Center. Interest in advanced drilling systems is high. The Geothermal Division of the Department of Energy has initiated a multi-year effort in the development of advanced drilling systems; the National Research Council completed a study of drilling and excavation technologies last year; and the MIT Energy Laboratory recently submitted a proposal for a national initiative in advanced drilling and excavation research. The primary reasons for this interest are financial. Worldwide expenditures on oil and gas drilling approach $75 billion per year. Also, drilling and well completion account for 25% to 50% of the cost of producing electricity from geothermal energy. There is incentive to search for methods to reduce the cost of drilling. Work on ideas to improve or replace rotary drilling technology dates back at least to the 1930`s. There was a significant amount of work in this area in the 1960`s and 1970`s; and there has been some continued effort through the 1980`s. Undoubtedly there are concepts for advanced drilling systems that have yet to be studied; however, it is almost certain that new efforts to initiate work on advanced drilling systems will build on an idea or a variation of an idea that has already been investigated. Therefore, a review of previous efforts coupled with a characterization of viable advanced drilling systems and the current state of technology as it applies to those systems provide the basis for the current study of advanced drilling.

Pierce, K.G. [Sandia National Labs., Albuquerque, NM (United States); Livesay, B.J. [Livesay Consultants, San Diego, CA (United States)

1995-03-01T23:59:59.000Z

324

Transparent selective illumination means suitable for use in optically activated electrical switches and optically activated electrical switches constructed using same  

DOE Patents (OSTI)

A planar transparent light conducting means and an improved optically activated electrical switch made using the novel light conducting means are disclosed. The light conducting means further comprise light scattering means on one or more opposite planar surfaces thereof to transmit light from the light conducting means into adjacent media and reflective means on other surfaces of the light conducting means not containing the light scattering means. The optically activated electrical switch comprises at least two stacked photoconductive wafers, each having electrodes formed on both surfaces thereof, and separated by the planar transparent light conducting means. The light scattering means on the light conducting means face surfaces of the wafers not covered by the electrodes to transmit light from the light conducting means into the photoconductive wafers to uniformly illuminate and activate the switch.

Wilcox, Russell B. (Oakland, CA)

1991-01-01T23:59:59.000Z

325

NETL: Advanced NOx Emissions Control  

NLE Websites -- All DOE Office Websites (Extended Search)

Home > Technologies > Coal & Power Systems > Innovations for Existing Plants > Advanced NOx Emissions Control Innovations for Existing Plants Advanced NOx Emissions Control Adv....

326

Advance Electronics | Open Energy Information  

Open Energy Info (EERE)

Advance Electronics Jump to: navigation, search Name Advance Electronics Place United Kingdom Zip LL14 3YR Product Develop and deliver power conditioners, transient suppressors,...

327

New implementation of an SX700 undulator beamline at the Advanced Light Source  

Science Conference Proceedings (OSTI)

A newly engineered implementation of a collimated SX700-style beam line for soft x-rays is described. This facility is operational at the Advanced Light Source and delivers high brightness undulator beams to a scanning zone plate microscope and to an array of end stations for x-ray spectroscopic studies of wet surfaces. Switching between branches is motorized, servo-steering systems maintain throughput and the monochromator works together with the elliptical undulator for a fully automated facility.

Warwick, T.; Andresen, N.; Comins, J.; Kaznacheyev, K.; Kortright, J.B.; McKean, P.J.; Padmore, H.A.; Shuh, D.K.; Stevens, T.; Tyliszczak, T.

2004-06-04T23:59:59.000Z

328

MEMS relays for make-break power switching applications : {111} silicon etched planar electrical contacts  

E-Print Network (OSTI)

Relays and switches are of interest in applications such as test equipment, radar, communications, and power systems, amongst others. Unlike solid state switches, mechanical relays provide galvanic isolation across the ...

Weber, Alexis Christian, 1974-

2008-01-01T23:59:59.000Z

329

Semiconductor-based all-optical switching for optical time-division multiplexed networks  

E-Print Network (OSTI)

All-optical switching will likely be required for future optical networks operating at data rates which exceed electronic processing speeds. Switches utilizing nonlinearities in semiconductor optical amplifiers (SOA) are ...

Robinson, Bryan S. (Bryan Shawn), 1975-

2003-01-01T23:59:59.000Z

330

Optimal Transmission Switching in Electric Networks for Improved Economic Operations1  

E-Print Network (OSTI)

1 Optimal Transmission Switching in Electric Networks for Improved Economic Operations1 Emily. Abstract Growing demand for electric power seems to necessitate new transmission lines, but obstacles" bulk electric grid, one that is more controllable and flexible. Optimal transmission switching

Ferris, Michael C.

331

Have You Switched to Compact Fluorescent Lights? Why or Why Not...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Switched to Compact Fluorescent Lights? Why or Why Not? Have You Switched to Compact Fluorescent Lights? Why or Why Not? May 1, 2009 - 1:52pm Addthis On Tuesday, John wrote about...

332

Performance of rearrangeable nonblocking 44 switch matrices on LiNbO3  

Science Conference Proceedings (OSTI)

The design, fabrication, and characterization of rearrangeable nonblocking 44 switch matrices and the development of a novel ITO (indium-tin-oxide)/Au multilayer electrode that leads to low switching voltages and low DC drift is reported. ...

D. Hoffman; H. Heidrich; H. Ahlers; M. K. Fluge

2006-09-01T23:59:59.000Z

333

Advanced Vehicle Technologies Awards | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Advanced Vehicle Technologies Awards Advanced Vehicle Technologies Awards Microsoft Word - VTP 175 Advanced Vehicle Tech project descriptions draft v5 8-2-11 AdvancedVehiclesTechn...

334

CS4353 Course Outline Advanced Graphics ?  

E-Print Network (OSTI)

Introduce advanced interactive computer graphics concepts Introduce advanced architecture of computer graphics devices Introduce advanced mathematical representation of graphic images Develop advanced graphics programming skills

Instructor John; E. Howl

2009-01-01T23:59:59.000Z

335

Electrochromically switched, gas-reservoir metal hydride devices with  

NLE Websites -- All DOE Office Websites (Extended Search)

Electrochromically switched, gas-reservoir metal hydride devices with Electrochromically switched, gas-reservoir metal hydride devices with application to energy-efficient windows Title Electrochromically switched, gas-reservoir metal hydride devices with application to energy-efficient windows Publication Type Journal Article LBNL Report Number LBNL-1089E Year of Publication 2008 Authors Anders, André, Jonathan L. Slack, and Thomas J. Richardson Journal Thin Solid Films Volume 1 Date Published 08/2003 Call Number LBNL-1089E Abstract Proof-of-principle gas-reservoir MnNiMg electrochromic mirror devices have been investigated. In contrast to conventional electrochromic approaches, hydrogen is stored (at low concentration) in the gas volume between glass panes of the insulated glass units (IGUs). The elimination of a solid state ion storage layer simplifies the layer stack, enhances overall transmission, and reduces cost. The cyclic switching properties were demonstrated and system durability improved with the incorporation a thin Zr barrier layer between the MnNiMg layer and the Pd catalyst. Addition of 9% silver to the palladium catalyst further improved system durability. About 100 full cycles have been demonstrated before devices slow considerably. Degradation of device performance appears to be related to Pd catalyst mobility, rather than delamination or metal layer oxidation issues originally presumed likely to present significant challenges.

336

C17: Voltage Impulse Induced Bistable Magnetization Switching and ...  

Science Conference Proceedings (OSTI)

Non-violate dynamic magnetization switch was also realized by voltage impulse ... Concentric Nanoparticles Embedded in Low Temperature Synthesized TiO2 Films .... F2: Development of the On-Line Mechanical Property Prediction System for ... Sintered Nd-Fe-B Magnets by Transmission Electron Microscopy Analysis.

337

Optically-initiated silicon carbide high voltage switch  

DOE Patents (OSTI)

An improved photoconductive switch having a SIC or other wide band gap substrate material, such as GaAs and field-grading liners composed of preferably SiN formed on the substrate adjacent the electrode perimeters or adjacent the substrate perimeters for grading the electric fields.

Caporaso, George J. (Livermore, CA); Sampayan, Stephen E. (Manteca, CA); Sullivan, James S. (Livermore, CA); Sanders, David M. (Livermore, CA)

2012-02-28T23:59:59.000Z

338

A switch wrapper design for SNA on-chip-network  

Science Conference Proceedings (OSTI)

In this paper we present a design of a switch wrapper as a component of SNA (SoC network architecture), which is an efficient on-chip-network compared to a shared bus architecture in a SoC. The SNA uses crossbar routers to provide the increasing demand ...

Jiho Chang; Jongsu Yi; JunSeong Kim

2005-10-01T23:59:59.000Z

339

Switching Surge and Lightning Impact on Increasing Power Flow  

Science Conference Proceedings (OSTI)

This report describes the effect of transient overvoltages on increasing the power flow on the electric power transmission system. The report focuses on the effect of system changes on transient recovery voltage (TRV) duties imposed on circuit breakers, and the impact of switching surges, lightning, and sustained overvoltages on transmission line upgrading.

2006-12-13T23:59:59.000Z

340

Multiple crossbar network: A switched high-speed local network  

SciTech Connect

The Multiple Crossbar Network (MCN) is a prototype High-Speed Local Network at the Los Alamos National Laboratory. It will interconnect supercomputers, network servers and workstations from various commercial vendors. The MCN can also serve as a backbone for message traffic between local area networks. The MCN is a switched local network of switching nodes called Cross-Point Stars (CPs). Hosts and CPs are connected by 800-Mbit/s (100-Mbyte/s) point-to-point ANSI High-Speed Channels. CPs include RISC-based network protocol processors called Crossbar Interfaces and a switching core called the Crossbar Switch. Protocols include physical, data link, intranet, and network access functionality. Various internet and transport protocols are intended to run above the MCN protocol suite. A network management and simple naming service is also included within the Los Alamos Network Architecture. Immediate applications include visualization. The MCN is intended to also serve as a framework for multicomputer applications. 36 refs., 10 figs.

Hoebelheinrich, R.; Thomsen, R.

1989-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "interrupting switch advanced" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Optical switching in midinfrared light-emitting diodes  

Science Conference Proceedings (OSTI)

We report on the optical quenching of electroluminescence in midinfrared light-emitting diodes operating at 3.0 ?m. The source is based on a symmetrical double heterostructure with large band offsets and is effectively switched off using coherent visible light.

A. Krier; V. V. Sherstnev; H. H. Gao; A. M. Monahov; G. Hill

2002-01-01T23:59:59.000Z

342

Photonic Switching Techniques and Architecture for Next Generation Optical Networks  

Science Conference Proceedings (OSTI)

Currently, the growth in capacity demand is still increasing by the emergence of a large number of applications that dramatically increase bandwidth demand and generate a large number of resource requirements in the network. Since the emerging applications ... Keywords: Fiber Bragg Grating (FBG), Wavelength Division Multiplexing (WDM), optical CMDA, optical switching, wavelength converters

Driss Benhaddou; Ghulam Chaudhry

2004-07-01T23:59:59.000Z

343

SLS-a fast switch-level simulator [for MOS  

Science Conference Proceedings (OSTI)

SLS, a large-capacity, high-performance switch-level simulator developed to run on an IBM System/370 architecture is described. SLS uses a model which closely reflects the behavior of MOS circuits. The high performance is the result of mixing a compiled ...

Z. Barzilai; D. K. Beece; L. M. Huisman; V. S. Iyengar; G. M. Silberman

2006-11-01T23:59:59.000Z

344

Quantum coherent switch utilizing commensurate nanoelectrode and charge density periodicities  

DOE Patents (OSTI)

A quantum coherent switch having a substrate formed from a density wave (DW) material capable of having a periodic electron density modulation or spin density modulation, a dielectric layer formed onto a surface of the substrate that is orthogonal to an intrinsic wave vector of the DW material; and structure for applying an external spatially periodic electrostatic potential over the dielectric layer.

Harrison, Neil (Santa Fe, NM); Singleton, John (Los Alamos, NM); Migliori, Albert (Santa Fe, NM)

2008-08-05T23:59:59.000Z

345

Capacity allocation for long tailed traffic in packet switching networks  

Science Conference Proceedings (OSTI)

The packet switching techniques are under evolution. The conventional "best effort" approach will no longer be the dominant service. The next generation of IP networks must provide the QoS to customers. Inadequacy is obvious when the conventional capacity ... Keywords: QoS, capacity allocation, delay bound, diffServ, resource optimization, self-similarity

Xian Liu

2009-06-01T23:59:59.000Z

346

Battery/Charger Load Switch Approximates Ideal Diode  

E-Print Network (OSTI)

Abstract: Two circuits are described. The first uses external MOSFETs driven by the Power OK (POK) output of a Li-cell charger IC (MAX8814), to switch a load between battery and charging source without intervention from a microcontroller or system software. For charger ICs without a POK output (such as the MAX1507), the second circuit does the same switching using MOSFETs and a comparator (MAX920). A similar version of this article appeared in the July 19, 2010 issue of Electronic Design magazine. Most rechargeable battery-powered systems include a switch that connects the load either to the battery or to a source of charging power. Without it, a system with depleted battery may not operate immediately when plugged in. A switching circuit also allows the system to operate on adapter power while the battery is charging. The simplest and lowest-cost method for this battery/adapter power handoff is a diode-OR connection. The load connects to each power source (battery and adapter) through separate Schottky diodes, so power is applied by the higher voltagebattery or adapter. The drawback to this approach is the power loss (P D = I BATTERYV DIODE) and voltage drop (V DIODE = 0.350V at 0.5A, from the PMEG2010AEH data sheet) incurred when the battery services the load. Such losses may not be significant for high-voltage multicell batteries, but for 1-cell Li+ batteries or 24 cell NiMh batteries, the percentages of power loss and diode drop across the blocking diode are considerable. The circuit of Figure 1 switches loads with a voltage drop of only 45mV at 0.5A, which is a head-room improvement of 350mV-

Budge Ing; Hubert Bugajski

2011-01-01T23:59:59.000Z

347

Analysis of a laser induced plasma in high pressure SF6 gas for high-voltage, high-current switching.  

E-Print Network (OSTI)

??The Laser Triggered Switch Program at Sandia National Laboratories is an intensive development study to understand and optimize the laser triggered gas switch (LTGS) for (more)

Clark, Waylon

2007-01-01T23:59:59.000Z

348

An analytical model for input-buffered optical packet switches with reconfiguration overhead  

Science Conference Proceedings (OSTI)

The overhead associated with reconfiguring a switch fabric in optical packet switches is an important issue in relation to the packet transmission time and can adversely affect switch performance. The reconfiguration overhead increases the mean waiting ... Keywords: Batch arrival, Discrete-time system, Optical communication, Stochastic analysis, Stochastic decomposition

Kuan-Hung Chou; Woei Lin

2011-12-01T23:59:59.000Z

349

Research Note---Online Users' Switching Costs: Their Nature and Formation  

Science Conference Proceedings (OSTI)

The highly competitive and rapidly changing market for online services is becoming increasingly effective at locking users in through the coercive effects of switching costs. Although the information systems field increasingly recognizes that switching ... Keywords: online consumer behavior, partial least squares, structural equation modeling, survey data, switching costs

Soumya Ray; Sung S. Kim; James G. Morris

2012-03-01T23:59:59.000Z

350

Design of a wideband multi-standard antenna switch for wireless communication devices  

Science Conference Proceedings (OSTI)

A wideband Low Power Single Pole 6-Throw (SP6T) antenna switch has been designed for GSM/DCS/802.11b mobile standards using a newly improved architecture and fabricated using a pseudomorphic depletion mode 0.18@mm HEMT GaAs process. The switch exhibits ... Keywords: Antenna switch, GaAs, MMIC, Mobile telecommunications, Wideband, pHEMT transistors

Vlad Marian; Jacques Verdier; Bruno Allard; Christian Vollaire

2011-05-01T23:59:59.000Z

351

Application of Soft-switching Technology in the Photovoltaic Array Simulator  

Science Conference Proceedings (OSTI)

The PV array simulator is the analog DC input device which is indispensable in the development and debugging of the solar PV grid-connected inverter. As the inverter switching frequency becomes larger and larger, the simulator as the analog input also ... Keywords: PV array simulator, Soft-switching technology, Zero-voltage zero-current switching phase-shifted full-bridge circuit

Chen Ya-ai, Shi Yu-teng

2012-07-01T23:59:59.000Z

352

Time-stepping numerical simulation of switched circuits within the nonsmooth dynamical systems approach  

Science Conference Proceedings (OSTI)

The numerical integration of switching circuits is known to be a tough issue when the number of switches is large, or when sliding modes exist. Then, classical analog simulators may behave poorly, or even fail. In this paper, it is shown on two examples ... Keywords: analog simulation, backward Euler algorithm, complementarity dynamical systems, complementarity problems, multivalued systems, power converters, switching circuits, unilateral state constraints

Vincent Acary; Olivier Bonnefon; Bernard Brogliato

2010-07-01T23:59:59.000Z

353

Intelligent Switching System Methodology and Its Application in Complex Process Control System  

Science Conference Proceedings (OSTI)

The switching system can be viewed as a kind of hybrid systems because it with both continuous state variables and discrete state variables. Viewing the controller as hierarchical, then the switch strategy belongs to the higher hierarchy. It represents ... Keywords: intelligent switching system, hybrid systems, fuzzy logic, complex process control, coke oven

Junwei Gao; Yangdong Ye; Tianyun Shi; Qiuhua Jiang; Limin Jia

2002-09-01T23:59:59.000Z

354

NETL: Advanced Research - Successes  

NLE Websites -- All DOE Office Websites (Extended Search)

Successes Successes Advanced Research Successes Sensors & Controls "...Optical grade single-crystal sapphire optical fiber waveguides are especially attractive for fabricating sensors for the harsh high-temperature, corrosive environments found in gasifiers." Read More... "Industry adoption of CCADS will open the door to a new generation of more efficient, ultra-low emission turbines in advanced energy systems" Read More... Bioprocessing " Successful development and commercial application of this environmentally safe bacterial toxin will allow power plants to reduce or eliminate the use of chlorination, reducing the risk of harmful effects on aquatic ecosystems." Advanced Materials " This project will benefit gasification technology development and deployment by improving materials to contain and monitor gasification processes." Read More...

355

Geothermal: Advanced Search  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Search Advanced Search Geothermal Technologies Legacy Collection Help/FAQ | Site Map | Contact Us | Admin Log On Home/Basic Search About Publications Advanced Search New Hot Docs News Related Links You may need to turn on Javascript in your browser to use the Find Subject and Find Author features. Sort By: Relevance Publication Date System Entry Date Document Type Title Research Org Sponsoring Org OSTI Identifier Report Number DOE Contract Number Ascending Descending Enter search criteria into as few or as many fields as desired. Search In For Term(s) (Place phrase in "double quotes") All Fields: Bibliographic Data: Full Text: Creator/Author Select : Title: Subject Select : Identifier Numbers: Journal Info.: Conference Info.: Patent Info.: Research Org.: Sponsoring Org.:

356

NIST's Advanced Technology Program  

NLE Websites -- All DOE Office Websites (Extended Search)

NIST's Advanced NIST's Advanced Technology Program NIST's Advanced Technology Program DOE Workshop on Hydrogen Separation and Purification Technologies Arlington, VA, Sept. 8-9, 2004 Jason Huang 301-975-4197 National Institute of Standards and Technology 100 Bureau Drive Stop 4730 Gaithersburg, MD 20899-4730 http://www.atp.nist.gov National Institute of Standards and Technology * Technology Administration * U.S. Department of Commerce ATP is part of NIST Helping America Measure Up NIST Mission ATP is part of NIST NIST Mission: Strengthen the U.S. economy and improve the quality of life by working with industry to develop and apply technology, measurements, and standards. * * * * * * 3,000 employees $771 million annual budget 2,000 field agents 1,800 guest researchers $2.2 billion co-funding of

357

Advanced Hydride Laboratory  

DOE Green Energy (OSTI)

Metal hydrides have been used at the Savannah River Tritium Facilities since 1984. However, the most extensive application of metal hydride technology at the Savannah River Site is being planned for the Replacement Tritium Facility, a $140 million facility schedules for completion in 1990 and startup in 1991. In the new facility, metal hydride technology will be used to store, separate, isotopically purify, pump, and compress hydrogen isotopes. In support of the Replacement Tritium Facility, a $3.2 million, cold,'' process demonstration facility, the Advanced Hydride Laboratory began operation in November of 1987. The purpose of the Advanced Hydride Laboratory is to demonstrate the Replacement Tritium Facility's metal hydride technology by integrating the various unit operations into an overall process. This paper will describe the Advanced Hydride Laboratory, its role and its impact on the application of metal hydride technology to tritium handling.

Motyka, T.

1989-01-01T23:59:59.000Z

358

Advanced fuel chemistry for advanced engines.  

SciTech Connect

Autoignition chemistry is central to predictive modeling of many advanced engine designs that combine high efficiency and low inherent pollutant emissions. This chemistry, and especially its pressure dependence, is poorly known for fuels derived from heavy petroleum and for biofuels, both of which are becoming increasingly prominent in the nation's fuel stream. We have investigated the pressure dependence of key ignition reactions for a series of molecules representative of non-traditional and alternative fuels. These investigations combined experimental characterization of hydroxyl radical production in well-controlled photolytically initiated oxidation and a hybrid modeling strategy that linked detailed quantum chemistry and computational kinetics of critical reactions with rate-equation models of the global chemical system. Comprehensive mechanisms for autoignition generally ignore the pressure dependence of branching fractions in the important alkyl + O{sub 2} reaction systems; however we have demonstrated that pressure-dependent 'formally direct' pathways persist at in-cylinder pressures.

Taatjes, Craig A.; Jusinski, Leonard E.; Zador, Judit; Fernandes, Ravi X.; Miller, James A.

2009-09-01T23:59:59.000Z

359

Advanced Containment System  

SciTech Connect

An advanced containment system for containing buried waste and associated leachate. The advanced containment system comprises a plurality of casing sections with each casing section interlocked to an adjacent casing section. Each casing section includes a complementary interlocking structure that interlocks with the complementary interlocking structure on an adjacent casing section. A barrier filler substantially fills the casing sections and may substantially fill the spaces of the complementary interlocking structure to form a substantially impermeable barrier. Some of the casing sections may include sensors so that the casing sections and the zone of interest may be remotely monitored after the casing sections are emplaced in the ground.

Kostelnik, Kevin M. (Idaho Falls, ID); Kawamura, Hideki (Tokyo, JP); Richardson, John G. (Idaho Falls, ID); Noda, Masaru (Tokyo, JP)

2005-02-08T23:59:59.000Z

360

Advanced Monitoring systems initiative  

SciTech Connect

The Advanced Monitoring Systems Initiative (AMSI) actively searches for promising technologies and aggressively moves them from the research bench into DOE/NNSA end-user applications. There is a large unfulfilled need for an active element that reaches out to identify and recruit emerging sensor technologies into the test and evaluation function. Sensor research is ubiquitous, with the seeds of many novel concepts originating in the university systems, but at present these novel concepts do not move quickly and efficiently into real test environments. AMSI is a widely recognized, self-sustaining ''business'' accelerating the selection, development, testing, evaluation, and deployment of advanced monitoring systems and components.

R.J. Venedam; E.O. Hohman; C.F. Lohrstorfer; S.J. Weeks; J.B. Jones; W.J. Haas

2004-09-30T23:59:59.000Z

Note: This page contains sample records for the topic "interrupting switch advanced" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Advanced Simulation and Computing  

National Nuclear Security Administration (NNSA)

NA-ASC-117R-09-Vol.1-Rev.0 NA-ASC-117R-09-Vol.1-Rev.0 Advanced Simulation and Computing PROGRAM PLAN FY09 October 2008 ASC Focal Point Robert Meisner, Director DOE/NNSA NA-121.2 202-586-0908 Program Plan Focal Point for NA-121.2 Njema Frazier DOE/NNSA NA-121.2 202-586-5789 A Publication of the Office of Advanced Simulation & Computing, NNSA Defense Programs i Contents Executive Summary ----------------------------------------------------------------------------------------------- 1 I. Introduction -------------------------------------------------------------------------------------------------------- 2 Realizing the Vision ------------------------------------------------------------------------------------------------- 2 The Future of the Nuclear Weapons Complex ---------------------------------------------------------------- 2

362

Advanced turbine systems program  

SciTech Connect

In accordance with the goals of the DOE program, improvements in the gas turbine are the primary focus of Allison activity during Phase I. To this end Allison conducted a survey of potentially applicable gas turbine cycles and selected the advanced combined cycle as reference system. Extensive analysis of two versions of the advanced combined cycle was performed against the requirement for a 60% thermal efficiency (LHV) utility-sized, natural gas fired system. This analysis resulted in technology requirements for this system. Additional analysis determined emissions potential for the system, established a coal-fueled derivative system and a commercialization plan. This report deals with the technical requirements for a system that meets the thermal efficiency goal. Allison initially investigated four basic thermodynamic cycles: Humid air turbine, intercalate-recuperated systems, advanced combined cycle, chemically recuperated cycle. Our survey and cycle analysis indicated that au had the potential of reaching 60% thermal efficiency. We also concluded that engine hot section technology would be a critical technology regardless of which cycle was chosen. Based on this result Allison chose to concentrate on the advanced combined cycle. This cycle is well known and understood by the utility turbine user community and is therefore likely to be acceptable to users.

Wilkes, C.; Mukavetz, D.W.; Knickerbocker, T.K.; Ali, S.A.

1992-12-31T23:59:59.000Z

363

Advanced turbine systems program  

SciTech Connect

In accordance with the goals of the DOE program, improvements in the gas turbine are the primary focus of Allison activity during Phase I. To this end Allison conducted a survey of potentially applicable gas turbine cycles and selected the advanced combined cycle as reference system. Extensive analysis of two versions of the advanced combined cycle was performed against the requirement for a 60% thermal efficiency (LHV) utility-sized, natural gas fired system. This analysis resulted in technology requirements for this system. Additional analysis determined emissions potential for the system, established a coal-fueled derivative system and a commercialization plan. This report deals with the technical requirements for a system that meets the thermal efficiency goal. Allison initially investigated four basic thermodynamic cycles: Humid air turbine, intercalate-recuperated systems, advanced combined cycle, chemically recuperated cycle. Our survey and cycle analysis indicated that au had the potential of reaching 60% thermal efficiency. We also concluded that engine hot section technology would be a critical technology regardless of which cycle was chosen. Based on this result Allison chose to concentrate on the advanced combined cycle. This cycle is well known and understood by the utility turbine user community and is therefore likely to be acceptable to users.

Wilkes, C.; Mukavetz, D.W.; Knickerbocker, T.K.; Ali, S.A.

1992-01-01T23:59:59.000Z

364

Advanced fossil energy utilization  

Science Conference Proceedings (OSTI)

This special issue of Fuel is a selection of papers presented at the symposium Advanced Fossil Energy Utilization co-sponsored by the Fuels and Petrochemicals Division and Research and New Technology Committee in the 2009 American Institute of Chemical Engineers (AIChE) Spring National Meeting Tampa, FL, on April 2630, 2009.

Shekhawat, D.; Berry, D.; Spivey, J.; Pennline, H.; Granite, E.

2010-01-01T23:59:59.000Z

365

A PWM method for reduction of switching loss in a full-bridge inverter  

SciTech Connect

This paper presents the ``hybrid pulsewidth modulation`` (HPWM) method which requires only two of the four switches in a full-bridge inverter to be pulsewidth-modulated at high frequency, thus significantly reducing the switching losses in the other two switches. For triangular carriers, HPWM has the same frequency spectrum and switching losses as the conventional unipolar PM (UPWM). A low-frequency model for a fast-switching HPWM full-bridge inverter with high-quality output is described, and is substantiated by experimental data.

Lai, R.S.; Ngo, K.D.T. [Univ. of Florida, Gainesville, FL (United States). Dept. of Electrical Engineering

1995-05-01T23:59:59.000Z

366

Advanced Coal Wind Hybrid: Economic Analysis  

E-Print Network (OSTI)

feasibility of combining wind farms with advanced coalfeasibility of combining wind farms with advanced coal

Phadke, Amol

2008-01-01T23:59:59.000Z

367

The Usefulness of Bi-Level Switching; Original Technical Note: November 1998. Revised August, 1999  

SciTech Connect

California's Title 24 Energy Efficiency Building Standard requires multiple lighting level control in all individual offices. Usually, this requirement is fulfilled using bi-level switching. With bi-level switching, each office occupant is provided with two wall switches near the doorway to control their lights. In a typical installation, one switch would control 1/3 of the fluorescent lamps in the ceiling lighting system, while the other switch would control the remaining 2/3 of the lamps. This allows four possible light levels: OFF, 1/3, 2/3 and FULL lighting. Because it has been required by building code since 1983, bi-level switching is common in California office buildings. However, there is no published evidence showing that occupants sometimes use just one switch rather than just switching on both switches when entering the room. Consequently, some have questioned whether bi-level switching is a necessary or desirable requirement for typical office buildings. In fact, the draft national standard, ASHRAE Standard 90.1-1989K apparently does not require bi-level switching at all.

Building Technologies Department

1998-11-01T23:59:59.000Z

368

Interprocessor bus switching system for simultaneous communication in plural bus parallel processing system  

DOE Patents (OSTI)

A bus switching apparatus and method for multiple processor computer systems comprises a plurality of bus switches interconnected by branch buses. Each processor or other module of the system is connected to a spigot of a bus switch. Each bus switch also serves as part of a backplane of a modular crate hardware package. A processor initiates communication with another processor by identifying that other processor. The bus switch to which the initiating processor is connected identifies and secures, if possible, a path to that other processor, either directly or via one or more other bus switches which operate similarly. If a particular desired path through a given bus switch is not available to be used, an alternate path is considered, identified and secured. 11 figures.

Atac, R.; Fischler, M.S.; Husby, D.E.

1991-01-15T23:59:59.000Z

369

Advanced Vehicle Testing Activity: Overview  

NLE Websites -- All DOE Office Websites (Extended Search)

Overview to Overview to someone by E-mail Share Advanced Vehicle Testing Activity: Overview on Facebook Tweet about Advanced Vehicle Testing Activity: Overview on Twitter Bookmark Advanced Vehicle Testing Activity: Overview on Google Bookmark Advanced Vehicle Testing Activity: Overview on Delicious Rank Advanced Vehicle Testing Activity: Overview on Digg Find More places to share Advanced Vehicle Testing Activity: Overview on AddThis.com... Home Overview Light-Duty Vehicles Medium- and Heavy-Duty Vehicles Publications Overview The marketplace for advanced transportation technologies and the focus, direction, and funding of transportation programs are continually changing. The Advanced Vehicle Testing Activity's "2005 Overview of Advanced Technology Transportation" (PDF 736 KB) gives the latest information about

370

Realizing load reduction functions by aperiodic switching of load groups  

SciTech Connect

This paper investigates the problem of scheduling ON/OFF switching of residential appliances under the control of a Load Management System (LMS). The scheduling process is intended to reduce the controlled appliances` power demand in accordance with a predefined load reduction profile. To solve this problem, a solution approach, based on the methodology of Pulse Width Modulation (PWM), is introduced. This approach provides a flexible mathematical basis for studying different aspects of the scheduling problem. The conventional practices in this area are shown to be special cases of the PWM technique. By applying the PWM-based technique to the scheduling problem, important classes of scheduling errors are identified and analytical expressions describing them are derived. These expressions are shown to provide sufficient information to compensate for the errors. Detailed simulations of load groups` response to switching actions are use to support conclusions of this study.

Navid-Azarbaijani, N. [McGill Univ., Montreal, Quebec (Canada). Dept. of Electrical Engineering; Banakar, M.H. [CAE Electronics Ltd., St. Laurent, Quebec (Canada)

1996-05-01T23:59:59.000Z

371

Microsoft Word - BingenSwitchDisposition_CXMemo.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

7, 2012 7, 2012 REPLY TO ATTN OF: KEC-4 SUBJECT: Environmental Clearance Memorandum Joan Kendall Realty Specialist - TERR-3 Proposed Action: Bingen Substation Sectionalizing Switches Disposition Categorical Exclusion Applied (from Subpart D, 10 C.F.R. Part 1021): B1.24 Property Transfers Location: Klickitat County, Washington Proposed by: Bonneville Power Administration (BPA) Description of the Proposed Action: BPA proposes to sell two sectionalizing switches owned by BPA but located on PacifiCorp's Condit-Powerdale 69-kilovolt (kV) line in and adjacent to the Bingen Substation. BPA sold the Bingen substation to Klickitat County PUD in 1997 but retained ownership rights to inspect, maintain, repair, and replace its remaining revenue meters,

372

Anisotropic high temperature superconductors as variable resistors and switches  

Science Conference Proceedings (OSTI)

Several anisotropic high temperature superconductors show critical current densities which are strongly dependent on the direction of an applied external magnetic field. The resistance of a sample can change by several orders of magnitude by applying a magnetic field. The potential for using the field dependent variable resistor or switch for applications in power systems is evaluated. Test results with small samples are presented. The requirements for large scale applications are outlined. The magnetic field triggering requirement, the frequency response of the device, use in 60 Hz ac circuits and heat transfer consideration are investigated. Several application examples are discussed. Use of variable resistor as a fault current limiter, as a switching element in rectifier circuitry and as an improved dump resistor for a superconducting magnet is presented.

Boenig, H.J.; Daugherty, M.A.; Fleshler, S.; Maley, M.P.; Mueller, F.M.; Prenger, F.C.; Coulter, J.Y.

1994-12-01T23:59:59.000Z

373

A Single Transistor Three Phase Resonant Switch For High Quality  

E-Print Network (OSTI)

Existing 34, ac-dc low-harmonic rectiifiers are costly and require complex control schemes to minimize input current harmonics. Introduced here are three new classes of low cost 34, ac-dc high power factorllow harmonic controlled rectifiers. These are derived from parent dc-dc convrter topologies containing boost-type inputs, buck-type inputs and qwsi resonant zero-current-switch (ZCS) buck-type inputs. With a single active switch in addition to the diode bridge rectijier, the converters are capable of drawing a high quality input current waveform naturally at nearly unity power factor. Thus a simple 34, ac-dc high paver factor rechifie7 is obtained. Simulation and experimental results are supplied to demonstrate the validity of the concept. 1.

Esam Ismail; Robert W. Erickson

1992-01-01T23:59:59.000Z

374

Electro-optical switching and memory display device  

DOE Patents (OSTI)

An electro-optical display device having a housing with wall means including one transparent wall and at least one other wall. Counter electrodes are positioned on the transparent wall and display electrodes are positioned on the other wall with both electrodes in electrically conductive relationship with an electrolyte. Circuits means are connected to the display and counter electrodes to apply different predetermined control potentials between them. The display electrodes are covered with a thin electrically conductive polymer film that is characterized according to the invention by having embedded in it pigment molecules as counter ions. The display device is operable to be switched to a plurality of different visual color states at an exceptionally rapid switching rate while each of the color states is characterized by possessing good color intensity and definition.

Skotheim, T.A.; O' Grady, W.E.; Linkous, C.A.

1983-12-29T23:59:59.000Z

375

Lyons Switch, Oklahoma: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

Switch, Oklahoma: Energy Resources Switch, Oklahoma: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 35.7749095°, -94.6915484° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":35.7749095,"lon":-94.6915484,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

376

Bistability in the sine-Gordon equation: The ideal switch  

SciTech Connect

The sine-Gordon equation, used as the representative nonlinear wave equation, presents a bistable behavior resulting from nonlinearity and generating hysteresis properties. We show that the process can be understood in a comprehensive analytical formulation and that it is a generic property of nonlinear systems possessing a natural band gap. The approach allows one to discover that the sine-Gordon equation can work as an ideal switch by reaching a transmissive regime with vanishing driving amplitude.

Khomeriki, R. [Laboratoire de Physique Theorique et Astroparticules CNRS-UMR5207, Universite Montpellier 2, 34095 Montpellier (France); Physics Department, Tbilisi State University, 0128 Tbilisi (Georgia); Leon, J. [Laboratoire de Physique Theorique et Astroparticules CNRS-UMR5207, Universite Montpellier 2, 34095 Montpellier (France)

2005-05-01T23:59:59.000Z

377

Study of Outage Request Switching and Clearance Forms  

Science Conference Proceedings (OSTI)

Many organizations can benefit from this research by improving the information content and the quality of their switching and clearance forms, hence avoiding errors and improving worker and system safety. Also, many utilities are consolidating or standardizing procedures and documents used by formerly independent utilities. This situation presents an opportunity for developing more effective documents, but hitherto there has been little basis other than custom or personal preference for choosing among po...

2006-02-22T23:59:59.000Z

378

Disconnect Switch: laboratory testing and analysis of field aged samples  

Science Conference Proceedings (OSTI)

The work reported in this technical update is part of an ongoing Electric Power Research Institute (EPRI) effort to improve the balance of station equipment life management; this report presents results of investigations of issues, typical problems, and utility maintenance needs concerning substation high-voltage disconnect and grounding switches.This project phase included a needs assessment and research roadmap development to identify and address maintenance and other life ...

2012-12-14T23:59:59.000Z

379

Assessment of High-Voltage Disconnect Switch Maintenance Practices  

Science Conference Proceedings (OSTI)

This technical update is part of an on-going EPRI effort to improve the balance of station equipment life management. It presents the initial results of investigations of issues, typical problems, and utility maintenance needs regarding station disconnect and grounding switches. Reliable and safe life-cycle management of substations requires timely and effective maintenance based on accurate inspection practices and knowledge of equipment conditions. In addition to tending to transformers and circuit bre...

2010-12-23T23:59:59.000Z

380

A Quantum Biological Switch Based on Superradiance Transitions  

E-Print Network (OSTI)

A linear chain of connected electron sites with two asymmetric sinks, one attached to each end, is used as a simple model of quantum electron transfer in photosynthetic bio-complexes. For a symmetric initial population in the middle of the chain, it is expected that electron transfer is mainly directed towards the strongest coupled sink. However, we show that quantum effects radically change this intuitive "classical" mechanism, so that electron transfer can occur through the weaker coupled sink with maximal efficiency. Using this capability, we show how to design a quantum switch that can transfer an electron to the left or right branch of the chain, by changing the coupling to the sinks. The operational principles of this quantum device can be understood in terms of superradiance transitions and subradiant states. This switching, being a pure quantum effect, can be used as a witness of wave--like behaviour of excitations in molecular chains. When realistic data are used for the photosystem II reaction center, this quantum biological switch is shown to retain its reliability, even at room temperature.

D. Ferrari; G. L. Celardo; G. P. Berman; R. T. Sayre; F. Borgonovi

2013-07-05T23:59:59.000Z

Note: This page contains sample records for the topic "interrupting switch advanced" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

A study of explosively formed fuse (EFF) opening switch resistance  

SciTech Connect

Many pulsed power experiments need pulse shaping to optimize the power flow from a flux compression generator (FCG) to an experimental load. In a laboratory environment this can be a simple task where the switches are not destroyed. However, in experiments with high explosives, where a large amount of damage occurs, a single use EFF opening switch may be a good choice. In an EFF, explosives are used to thin a current carrying sheet of aluminum as it is forced into a grooved dye. The current is modified by the time dependent changes in resistance as the aluminum is stretched. We will correlate the hydrodynamic effects with resistance. The hydrodynamic profile is determined by Mesa-2D, a well proven hydrodynamics computer code, and MA THEMA TICA is used convert material contours into total resistance using the resistivity as a function of time from various sources. Experimentally, we will determine the actual resistance and compare it with the calculated values. We have used these switches for decades but still do not understand the details of the physics. The resistance change may be due to several processes but in this paper we will concentrate on stretching as the most important contribution. Also, in this paper we will compare the details of the hydrodynamics with the details of experimental and calculated resistance and hopefully generate a predictive model for future designs with other geometries and materials.

Oona, Henn [Los Alamos National Laboratory; Goforth, James H [Los Alamos National Laboratory; Herrera, Dennis H [Los Alamos National Laboratory; Tasker, Douglas G [Los Alamos National Laboratory; Torres, D. T. [Los Alamos National Laboratory

2010-12-21T23:59:59.000Z

382

Active high-power RF switch and pulse compression system  

DOE Patents (OSTI)

A high-power RF switching device employs a semiconductor wafer positioned in the third port of a three-port RF device. A controllable source of directed energy, such as a suitable laser or electron beam, is aimed at the semiconductor material. When the source is turned on, the energy incident on the wafer induces an electron-hole plasma layer on the wafer, changing the wafer's dielectric constant, turning the third port into a termination for incident RF signals, and. causing all incident RF signals to be reflected from the surface of the wafer. The propagation constant of RF signals through port 3, therefore, can be changed by controlling the beam. By making the RF coupling to the third port as small as necessary, one can reduce the peak electric field on the unexcited silicon surface for any level of input power from port 1, thereby reducing risk of damaging the wafer by RF with high peak power. The switch is useful to the construction of an improved pulse compression system to boost the peak power of microwave tubes driving linear accelerators. In this application, the high-power RF switch is placed at the coupling iris between the charging waveguide and the resonant storage line of a pulse compression system. This optically controlled high power RF pulse compression system can handle hundreds of Megawatts of power at X-band.

Tantawi, Sami G. (San Mateo, CA); Ruth, Ronald D. (Woodside, CA); Zolotorev, Max (Mountain View, CA)

1998-01-01T23:59:59.000Z

383

Power Systems Advanced Research  

DOE Green Energy (OSTI)

In the 17 quarters of the project, we have accomplished the following milestones - first, construction of the three multiwavelength laser scattering machines for different light scattering study purposes; second, build up of simulation software package for simulation of field and laboratory particulates matters data; third, carried out field online test on exhaust from combustion engines with our laser scatter system. This report gives a summary of the results and achievements during the project's 16 quarters period. During the 16 quarters of this project, we constructed three multiwavelength scattering instruments for PM2.5 particulates. We build up a simulation software package that could automate the simulation of light scattering for different combinations of particulate matters. At the field test site with our partner, Alturdyne, Inc., we collected light scattering data for a small gas turbine engine. We also included the experimental data feedback function to the simulation software to match simulation with real field data. The PM scattering instruments developed in this project involve the development of some core hardware technologies, including fast gated CCD system, accurately triggered Passively Q-Switched diode pumped lasers, and multiwavelength beam combination system. To calibrate the scattering results for liquid samples, we also developed the calibration system which includes liquid PM generator and size sorting instrument, i.e. MOUDI. In this report, we give the concise summary report on each of these subsystems development results.

California Institute of Technology

2007-03-31T23:59:59.000Z

384

Posters | Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

Your Cart (0 Posters) Your Cart (0 Posters) Your cart is empty. checkout Subtotal: $0.00 update empty Posters Order a printed APS poster! 11 in. x 17 in. prints will be mailed in the order requests are received. 36 in. x 36 in. posters will be sent to school addresses once all orders are processed. The Advanced Photon Source Is The Advanced Photon Source Is Qty: 1 add to cart Technologies from Materials Science Technologies from Materials Science Qty: 1 add to cart Materials Under Extreme Pressure Materials Under Extreme Pressure Qty: 1 add to cart Biological Macromolecules in Action Biological Macromolecules in Action Qty: 1 add to cart Journey to the Center of the Earth Journey to the Center of the Earth Qty: 1 add to cart Earthshaking Monitor Earthshaking Monitor Qty: 1 add to cart Imaging with X-rays

385

Advanced Simulation Capability for  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Simulation Capability for Simulation Capability for Environmental Management (ASCEM) ASCEM is being developed to provide a tool and approach to facilitate robust and standardized development of perfor- mance and risk assessments for cleanup and closure activi- ties throughout the EM complex. The ASCEM team is composed of scientists from eight National Laboratories. This team is leveraging Department of Energy (DOE) investments in basic science and applied research including high performance computing codes developed through the Advanced Scientific Computing Research and Advanced Simulation & Computing pro- grams as well as collaborating with the Offices of Science, Fossil Energy, and Nuclear Energy. Challenge Current groundwater and soil remediation challenges that will continue to be addressed in the next decade include

386

Overview | Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

APS Overview: APS Overview: Introduction APS Systems Map LINAC Booster Synchrotron Storage Ring Insertion Devices Experiment Hall LOMs & Beamlines Overview of the APS The Advanced Photon Source (APS) at the U.S. Department of Energy's Argonne National Laboratory provides this nation's (in fact, this hemisphere's) brightest storage ring-generated x-ray beams for research in almost all scientific disciplines. Photo: Aerial Photo of APS Aerial photo of the Advanced Photon Source These x-rays allow scientists to pursue new knowledge about the structure and function of materials in the center of the Earth and in outer space, and all points in between. The knowledge gained from this research can impact the evolution of combustion engines and microcircuits, aid in the development of new pharmaceuticals, and pioneer nanotechnologies whose

387

NETL: Advanced Research - Ultrasupercritical  

NLE Websites -- All DOE Office Websites (Extended Search)

High Performance Materials > Ultrasupercritical High Performance Materials > Ultrasupercritical Advanced Research High Performance Materials Ultrasupercritical Increasing the temperature and pressure of steam improves the efficiency of boilers and turbines that use steam as the working fluid. These higher efficiency boilers and turbines require less coal and produce less greenhouse gases. Identifying materials that can operate for long periods of time at extreme temperatures and pressures is a major goal of NETL's Advanced Research Materials Program. Phase diagram of water Figure 1: Phase diagram of water To understand the terminology of boilers and turbines, it is first necessary to understand the basics of the water/steam phase diagram (see Figure 1). The normal boiling point (nbp) of water occurs at 1 atmosphere

388

Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

Tomography Interest Group Contact: Robert Winarski, Center for Nanoscale Materials winarski@anl.gov Contact: Francesco De Carlo, Advanced Photon Source decarlo@aps.anl.gov The tomography special interest group of the Advanced Photon Source (APS) at Argonne National Laboratory has been created to promote awareness of the tomography facilities at the APS and to foster communications between the various research groups. Through this group, we believe we can build a strong user community for tomography. The following beamlines have active tomography research programs: 2-BM-B (XOR) http://www.aps.anl.gov/Xray_Science_Division/Xray_Microscopy_and_Imaging/Science_and_Research/Techniques/Tomography/index.html Information about the beamline: http://beam.aps.anl.gov/pls/apsweb/beamline_display_pkg.display_beamline?p_beamline_num_c=31

389

Advanced Technology Vehicle Testing  

DOE Green Energy (OSTI)

The goal of the U.S. Department of Energy's Advanced Vehicle Testing Activity (AVTA) is to increase the body of knowledge as well as the awareness and acceptance of electric drive and other advanced technology vehicles (ATV). The AVTA accomplishes this goal by testing ATVs on test tracks and dynamometers (Baseline Performance testing), as well as in real-world applications (Fleet and Accelerated Reliability testing and public demonstrations). This enables the AVTA to provide Federal and private fleet managers, as well as other potential ATV users, with accurate and unbiased information on vehicle performance and infrastructure needs so they can make informed decisions about acquiring and operating ATVs. The ATVs currently in testing include vehicles that burn gaseous hydrogen (H2) fuel and hydrogen/CNG (H/CNG) blended fuels in internal combustion engines (ICE), and hybrid electric (HEV), urban electric, and neighborhood electric vehicles. The AVTA is part of DOE's FreedomCAR and Vehicle Technologies Program.

James Francfort

2004-06-01T23:59:59.000Z

390

Advanced drilling systems  

DOE Green Energy (OSTI)

Drilling is ubiquitous in oil, gas, geothermal, minerals, water well, and mining industries. Drilling and well completion account for 25% to 50% of the cost of producing power from geothermal energy. Reduced drilling costs will reduce the cost of electricity produced from geothermal resources. Undoubtedly, there are concepts for advanced drilling systems that have yet to be studied. However, the breadth and depth of previous efforts in this area almost guarantee that any new efforts will at least initially build on an idea or a variation of an idea that has already been investigated. Therefore, a review of previous efforts, coupled with a characterization of viable advanced drilling systems and the current state of technology as it applies to those systems, provide the basis for this study.

Pierce, K.G.; Finger, J.T. [Sandia National Labs., Albuquerque, NM (United States); Livesay, B.J. [Livesay Consultants, San Diego, CA (United States)

1995-12-31T23:59:59.000Z

391

Advanced far infrared detectors  

SciTech Connect

Recent advances in photoconductive and bolometric semiconductor detectors for wavelength 1 mm > {lambda} > 50 {mu}m are reviewed. Progress in detector performance in this photon energy range has been stimulated by new and stringent requirements for ground based, high altitude and space-borne telescopes for astronomical and astrophysical observations. The paper consists of chapters dealing with the various types of detectors: Be and Ga doped Ge photoconductors, stressed Ge:Ga devices and neutron transmutation doped Ge thermistors. Advances in the understanding of basic detector physics and the introduction of modern semiconductor device technology have led to predictable and reliable fabrication techniques. Integration of detectors into functional arrays has become feasible and is vigorously pursued by groups worldwide.

Haller, E.E.

1993-05-01T23:59:59.000Z

392

Advanced Separation Consortium  

Science Conference Proceedings (OSTI)

The Center for Advanced Separation Technologies (CAST) was formed in 2001 under the sponsorship of the US Department of Energy to conduct fundamental research in advanced separation and to develop technologies that can be used to produce coal and minerals in an efficient and environmentally acceptable manner. The CAST consortium consists of seven universities - Virginia Tech, West Virginia University, University of Kentucky, Montana Tech, University of Utah, University of Nevada-Reno, and New Mexico Tech. The consortium brings together a broad range of expertise to solve problems facing the US coal industry and the mining sector in general. At present, a total of 60 research projects are under way. The article outlines some of these, on topics including innovative dewatering technologies, removal of mercury and other impurities, and modelling of the flotation process. 1 photo.

NONE

2006-01-01T23:59:59.000Z

393

Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

0 Advanced Photon Source 0 Advanced Photon Source A U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences national synchrotron x-ray research facility Search Button About Welcome Overview Visiting the APS Mission & Goals Find People Organization Charts Committees Job Openings User Information Prospective Users New Users Current Users APS User Portal Macromolecular Crystallographers Administrators Find a Beamline Apply for Beam Time Contacts Calendars Community Scientific Access Site Access Training Science & Education Science & Research Highlights Conferences Seminars Publications Annual Reports APS Upgrade Courses and Schools Graduate Programs Scientific Software Media Center Calendar of Events APS News User News Argonne/APS Press Releases Argonne/APS Feature Stories Argonne/APS In The News

394

Advanced Energy Guides  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Guides Energy Guides Shanti Pless National Renewable Energy Laboratory shanti.pless@nrel.gov 303-384-6365 April 4 2013 2 | Building Technologies Office eere.energy.gov Advanced Energy Design Guides Provide prescriptive energy savings guidance and recommendations by building type and geographic location: * Design packages and strategies to help owners and designers achieve 50% site energy savings over Standard 90.1 * Two series: - 30% savings over 90.1-1999

395

Advanced geothermal technologies  

DOE Green Energy (OSTI)

Research and development in advanced technologies for geothermal energy production continue to increase the energy production options for the Nation. The high-risk investment over the past few years by the US Department of Energy in geopressured, hot dry rock, and magma energy resources is producing new means to lower production costs and to take advantage of these resources. The Nation has far larger and more regionally extensive geothermal resources than heretofore realized. At the end of a short 30-day closed-loop flow test, the manmade hot dry rock reservoir at Fenton Hill, New Mexico, was producing 10 MW thermal - and still climbing - proving the technical feasibility of this new technology. The scientific feasibility of magma energy extraction has been demonstrated, and new field tests to evaluate this technology are planned. Analysis and field tests confirm the viability of geopressured-geothermal energy and the prospect that many dry-hole or depleted petroleum wells can be turned into producing geopressured-geothermal wells. Technological advances achieved through hot dry rock, magma, geopressured, and other geothermal research are making these resources and conventional hydrothermal resources more competitive. Noteworthy among these technological advances are techniques in computer simulation of geothermal reservoirs, new means for well stimulation, new high-temperature logging tools and packers, new hard-rock penetration techniques, and new methods for mapping fracture flow paths across large underground areas in reservoirs. In addition, many of these same technological advances can be applied by the petroleum industry to help lower production costs in domestic oil and gas fields. 5 refs., 4 figs.

Whetten, J.T.; Murphy, H.D.; Hanold, R.J.; Myers, C.W.; Dunn, J.C.

1988-01-01T23:59:59.000Z

396

Advanced Energy Guides  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energy Guides Energy Guides Shanti Pless National Renewable Energy Laboratory shanti.pless@nrel.gov 303-384-6365 April 4 2013 2 | Building Technologies Office eere.energy.gov Advanced Energy Design Guides Provide prescriptive energy savings guidance and recommendations by building type and geographic location: * Design packages and strategies to help owners and designers achieve 50% site energy savings over Standard 90.1 * Two series: - 30% savings over 90.1-1999

397

Advanced Metering Infrastructure Technology  

Science Conference Proceedings (OSTI)

Revenue security is a major concern for utilities. Theft of electric service in the United States is widespread. In 2006, the revenue estimate for non-technical losses was 6.5 billion. Non-technical losses are associated with unidentified and uncollected revenue from pilferage, tampering with meters, defective meters, and errors in meter reading. In this report, revenue security describes the use of advanced metering infrastructure (AMI) technology to minimize non-technical losses.

2008-12-08T23:59:59.000Z

398

Advanced Turbine Design Program  

SciTech Connect

The prime objective of this project task is to select a natural gas fired as Advanced Turbine Systems (ATS) capable of reaching 60% cycle efficiency. Several cycles were compared and evaluated under all different kind of aspects, to determine the one with the highest potential and, at the same time, the best overall fit within and experience base to guarantee project goals. The combined cycle with multistep development potential was identified as the system to reach the 60% or greater thermal efficiency.

van der Linden, S.; Gnaedig, G.; Kreitmeier, F.

1992-01-01T23:59:59.000Z

399

Advanced Turbine Design Program  

SciTech Connect

The prime objective of this project task is to select a natural gas fired as Advanced Turbine Systems (ATS) capable of reaching 60% cycle efficiency. Several cycles were compared and evaluated under all different kind of aspects, to determine the one with the highest potential and, at the same time, the best overall fit within and experience base to guarantee project goals. The combined cycle with multistep development potential was identified as the system to reach the 60% or greater thermal efficiency.

van der Linden, S.; Gnaedig, G.; Kreitmeier, F.

1992-12-31T23:59:59.000Z

400

Advanced Manufacturing Partnership  

Energy.gov (U.S. Department of Energy (DOE))

AMO leads DOE's participation in the national interagency Advanced Manufacturing Partnership (AMP). AMO joins with other Federal agencies investing in innovation and cost-shared R&D projects, supporting manufacturing infrastructure, and facilitating job creation. These actions save energy and provide benefits to U.S. industry and the national economy. AMO contributes more broadly to the AMP with activities in Technology Development, Shared Infrastructure and Facilities, Education and Workforce Development.

Note: This page contains sample records for the topic "interrupting switch advanced" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Advanced Polymer Processing Facility  

Science Conference Proceedings (OSTI)

Some conclusions of this presentation are: (1) Radiation-assisted nanotechnology applications will continue to grow; (2) The APPF will provide a unique focus for radiolytic processing of nanomaterials in support of DOE-DP, other DOE and advanced manufacturing initiatives; (3) {gamma}, X-ray, e-beam and ion beam processing will increasingly be applied for 'green' manufacturing of nanomaterials and nanocomposites; and (4) Biomedical science and engineering may ultimately be the biggest application area for radiation-assisted nanotechnology development.

Muenchausen, Ross E. [Los Alamos National Laboratory

2012-07-25T23:59:59.000Z

402

Advanced Lighting Technologies  

Science Conference Proceedings (OSTI)

This report continues the technical assessment of advanced lighting technologies in the following product areasdimmable light-emitting diode (LED) screw-in replacement lamp, hybrid compact fluorescent lamp/halogen screw-in replacement lamp, replacement recessed can LED downlight, organic LED (OLED) disc, replacement mini high-intensity discharge (HID) lamp and ballast system, and solid-state plasma lighting (miniature HID technology) high-bay fixture. The research in this project helps to demonstrate how...

2011-12-21T23:59:59.000Z

403

Advanced Technology Vehicle Testing  

DOE Green Energy (OSTI)

The light-duty vehicle transportation sector in the United States depends heavily on imported petroleum as a transportation fuel. The Department of Energys Advanced Vehicle Testing Activity (AVTA) is testing advanced technology vehicles to help reduce this dependency, which would contribute to the economic stability and homeland security of the United States. These advanced technology test vehicles include internal combustion engine vehicles operating on 100% hydrogen (H2) and H2CNG (compressed natural gas) blended fuels, hybrid electric vehicles, neighborhood electric vehicles, urban electric vehicles, and electric ground support vehicles. The AVTA tests and evaluates these vehicles with closed track and dynamometer testing methods (baseline performance testing) and accelerated reliability testing methods (accumulating lifecycle vehicle miles and operational knowledge within 1 to 1.5 years), and in normal fleet environments. The Arizona Public Service Alternative Fuel Pilot Plant and H2-fueled vehicles are demonstrating the feasibility of using H2 as a transportation fuel. Hybrid, neighborhood, and urban electric test vehicles are demonstrating successful applications of electric drive vehicles in various fleet missions. The AVTA is also developing electric ground support equipment (GSE) test procedures, and GSE testing will start during the fall of 2003. All of these activities are intended to support U.S. energy independence. The Idaho National Engineering and Environmental Laboratory manages these activities for the AVTA.

James Francfort

2003-11-01T23:59:59.000Z

404

Advanced Microturbine Systems  

SciTech Connect

Dept. of Energy (DOE) Cooperative Agreement DE-FC02-00-CH11061 was originally awarded to Honeywell International, Inc. ?? Honeywell Power Systems Inc. (HPSI) division located in Albuquerque, NM in October 2000 to conduct a program titled Advanced Microturbine Systems (AMS). The DOE Advanced Microturbines Systems Program was originally proposed as a five-year program to design and develop a high efficiency, low emissions, durable microturbine system. The period of performance was to be October 2000 through September 2005. Program efforts were underway, when one year into the program Honeywell sold the intellectual property of Honeywell Power Systems Inc. and HPSI ceased business operations. Honeywell made an internal decision to restructure the existing program due to the HPSI shutdown and submitted a formal request to DOE on September 24, 2001 to transfer the Cooperative Agreement to Honeywell Engines, Systems and Services (HES&S) in Phoenix, AZ in order to continue to offer support for DOE's Advanced Microturbine Program. Work continued on the descoped program under Cooperative Agreement No. DE-FC26-00-CH11061 and has been completed.

None

2005-12-31T23:59:59.000Z

405

Advancement of Electrochromic Windows  

NLE Websites -- All DOE Office Websites (Extended Search)

Advancement of Electrochromic Windows Advancement of Electrochromic Windows Title Advancement of Electrochromic Windows Publication Type Report LBNL Report Number LBNL-59821 Year of Publication 2006 Authors Lee, Eleanor S., Stephen E. Selkowitz, Robert D. Clear, Dennis L. DiBartolomeo, Joseph H. Klems, Luis L. Fernandes, Gregory J. Ward, Vorapat Inkarojrit, and Mehry Yazdanian Date Published 04/2006 Other Numbers CEC-500-2006-052 Keywords commercial buildings, daylight, daylighting controls, Electrochromic windows, energy efficiency, human factors, peak demand, switchable windows, visual comfort Abstract This guide provides consumer-oriented information about switchable electrochromic (EC) windows. Electrochromic windows change tint with a small applied voltage, providing building owners and occupants with the option to have clear or tinted windows at any time, irrespective of whether it's sunny or cloudy. EC windows can be manually or automatically controlled based on daylight, solar heat gain, glare, view, energy-efficiency, peak electricity demand response, or other criteria. Window controls can be integrated with other building systems, such as lighting and heating/cooling mechanical systems, to optimize interior environmental conditions, occupant comfort, and energy-efficiency.

406

New single-switch three-phase high power factor rectifiers using multi-resonant zero current switching  

E-Print Network (OSTI)

Abstract A new family of single-switch three-phase highpower-factor rectifiers, which have continuous input and output currents, is introduced. By using a multiresonant scheme, the transistor operates with zero-current switching (ZCS), and the diodes operate with zero-voltage switching (ZVS). These multiresonant rectifiers with a single transistor are capable of drawing a higher quality input-current waveform at nearly unity power factor and lower stresses than quasi-resonant rectifiers. Buck-type converters are used for the power stage, and, hence, the output voltage is lower than the input voltage. Moreover, these rectifiers have a wide load range and low stresses on semiconductor devices. From the analysis, normalized characteristics of the rectifier are derived. The design and breadboard implementation of the rectifier delivering 147 V? at 6 kW from a 30 240-V???@vvA input is described. The total harmonic distortion (THD) of the line current is less than 5%, and the system efficiency is about 94% at the full load. Index Terms Frequency control, multiresonant, power factor correction (PFC), resonant converters, three-phase rectifiers,

Yungtaek Jang; Robert W. Erickson

1994-01-01T23:59:59.000Z

407

Coupling between switching regulation and torque generation in bacterial flagellar motor  

E-Print Network (OSTI)

The bacterial flagellar motor plays a crucial role in both bacterial locomotion and chemotaxis. Recent experiments reveal that the switching dynamics of the motor depends on the motor rotation speed, and thus the motor torque, non-monotonically. Here we present a unified mathematical model which models motor torque generation based on experimental torque-speed curves and torque-dependent switching based on the conformational spread model. The model successfully reproduces the observed switching rate as a function of the rotation speed, and provides a generic physical explanation independent of most details. A stator affects the switching dynamics through two mechanisms: accelerating the conformation flipping rates of individual rotor switching units, which favours slower motor speed and thus increasing torque; and affecting more switching units within unit time, which favours faster speed. Consequently, the switching rate shows a maximum at intermediate speed. Our model predicts that a motor switches more often with more stators. The load-switching relation may serve as a mechanism for sensing the physical environment, similar to the chemotaxis system for sensing the chemical environment. It may also coordinate the switch dynamics of motors within a cell.

Fan Bai; Tohru Minamino; Zhanghan Wu; Keiichi Namba; Jianhua Xing

2011-06-01T23:59:59.000Z

408

Advancing Next-Generation Vehicles  

NLE Websites -- All DOE Office Websites (Extended Search)

the U.S. Department of Energy's (DOE's) lead laboratory for researching advanced vehicle technologies, including hy- the U.S. Department of Energy's (DOE's) lead laboratory for researching advanced vehicle technologies, including hy- brid, plug-in hybrid, battery electric, and alternative fuel vehicles, Argonne provides transportation research critical to advancing the development of next-generation vehicles. Central to this effort is the Lab's Advanced Powertrain Research Facility (APRF), an integrated four-wheel drive chassis dynamometer and component test facility.

409

Advanced Developments in Electron Microscopy  

Science Conference Proceedings (OSTI)

About this Symposium. Meeting, Materials Science & Technology 2011. Symposium, Advanced Developments in Electron Microscopy. Sponsorship, MS&T...

410

Materials Characterization | Advanced Materials | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Characterization Nuclear Forensics Scanning Probes Related Research Materials Theory and Simulation Energy Frontier Research Centers Advanced Materials Home | Science &...

411

Utility-Scale Silicon Carbide Semiconductor: Monolithic Silicon Carbide Anode Switched Thyristor for Medium Voltage Power Conversion  

Science Conference Proceedings (OSTI)

ADEPT Project: GeneSiC is developing an advanced silicon-carbide (SiC)-based semiconductor called an anode-switched thyristor. This low-cost, compact SiC semiconductor conducts higher levels of electrical energy with better precision than traditional silicon semiconductors. This efficiency will enable a dramatic reduction in the size, weight, and volume of the power converters and electronic devices it's used in.GeneSiC is developing its SiC-based semiconductor for utility-scale power converters. Traditional silicon semiconductors can't process the high voltages that utility-scale power distribution requires, and they must be stacked in complicated circuits that require bulky insulation and cooling hardware. GeneSiC's semiconductors are well suited for high-power applications like large-scale renewable wind and solar energy installations.

None

2010-09-01T23:59:59.000Z

412

Advanced Research Robert R. Romanosky  

E-Print Network (OSTI)

in advanced ultra supercritical (USC) coal-fired power plants. The advanced materials developed in this project are essential for construction of coal-fired boilers with advanced steam cycles involving much higher temperatures and pressures than those presently used in conventional pulverized coal (PC) power

413

Advanced Green Technologies | Open Energy Information  

Open Energy Info (EERE)

Advanced Green Technologies Place Fort Lauderdale, Florida Zip 33311 Product Advanced Green Technologies is a US-based distributor of PV systems. It is owned by Advanced Roofing...

414

Draft Advanced Fossil Solicitation | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Advanced Fossil Solicitation Federal loan guarantee solicitation announcement -- Advanced Fossil Energy Projects. Microsoft Word - Draft Advanced Fossil Solicitation Final Draft.1...

415

Manufacturing Science and Technology: Advanced Manufacturing...  

NLE Websites -- All DOE Office Websites (Extended Search)

Contacts Advanced Manufacturing Trades Training Program Business Program Lead Yvonne Baros Advanced Manufacturing Trades Training Program Tom Souther Advanced Technology Academy...

416

Advanced Manufacturing Office: NewsDetail  

NLE Websites -- All DOE Office Websites (Extended Search)

Office: NewsDetail on Twitter Bookmark Advanced Manufacturing Office: NewsDetail on Google Bookmark Advanced Manufacturing Office: NewsDetail on Delicious Rank Advanced...

417

Advanced Biofuels Workshop  

Gasoline and Diesel Fuel Update (EIA)

August 1, 2012 August 1, 2012 In Attendance U.S. Energy Information Administration 1000 Independence Ave. SW, Room 2E-069 Washington, DC 20585 Adam Sieminski EIA Terry Higgins Hart Downstream Energy Services Peter Ryus RSB Services Foundation Zia Haq DOE Robert Kozak Atlantic Biomass Conversion Leticia Phillips UNICA/Brazillian Sugarecane Industry Assoc. Paul Kamp Leifmark, LLC/Inbicon Biomass Steve Gerber Fiberight Joanne Ivancic Advanced Biofuels USA John G. Cowie Agenda 2020 Technology Alliance Jeff Hazle American Fuel & Petrochemical Manufacturers Bryan Just American Petroleum Institute Barry Bernfeld Bunge Global Agribusiness Michael Corbin CLF Partners International LLC Paul Grabowski DOE, Office of Biomass Program

418

Advanced Demand Responsive Lighting  

NLE Websites -- All DOE Office Websites (Extended Search)

Demand Demand Responsive Lighting Host: Francis Rubinstein Demand Response Research Center Technical Advisory Group Meeting August 31, 2007 10:30 AM - Noon Meeting Agenda * Introductions (10 minutes) * Main Presentation (~ 1 hour) * Questions, comments from panel (15 minutes) Project History * Lighting Scoping Study (completed January 2007) - Identified potential for energy and demand savings using demand responsive lighting systems - Importance of dimming - New wireless controls technologies * Advanced Demand Responsive Lighting (commenced March 2007) Objectives * Provide up-to-date information on the reliability, predictability of dimmable lighting as a demand resource under realistic operating load conditions * Identify potential negative impacts of DR lighting on lighting quality Potential of Demand Responsive Lighting Control

419

Horizontal Advanced Tensiometer  

DOE Patents (OSTI)

An horizontal advanced tensiometer is described that allows the monitoring of the water pressure of soil positions, particularly beneath objects or materials that inhibit the use of previous monitoring wells. The tensiometer includes a porous cup, a pressure transducer (with an attached gasket device), an adaptive chamber, at least one outer guide tube which allows access to the desired horizontal position, a transducer wire, a data logger and preferably an inner guide tube and a specialized joint which provides pressure on the inner guide tube to maintain the seal between the gasket of the transducer and the adaptive chamber.

Hubbell, Joel M.; Sisson, James B.

2004-06-22T23:59:59.000Z

420

V-010: 3Com, HP, and H3C Switches SNMP Configuration Lets Remote Users Take  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

10: 3Com, HP, and H3C Switches SNMP Configuration Lets Remote 10: 3Com, HP, and H3C Switches SNMP Configuration Lets Remote Users Take Administrative Actions V-010: 3Com, HP, and H3C Switches SNMP Configuration Lets Remote Users Take Administrative Actions October 25, 2012 - 6:00am Addthis PROBLEM: 3Com, HP, and H3C Switches SNMP Configuration Lets Remote Users Take Administrative Actions PLATFORM: 3COM, and H3C Routers & Switches Specific products and model numbers is provided in the vendor's advisory. ABSTRACT: A vulnerability was reported in 3Com, HP, and H3C Switches. REFERENCE LINKS: HP Support document ID: c03515685 SecurityTracker Alert ID: 1027694 CVE-2012-3268 IMPACT ASSESSMENT: High DISCUSSION: A remote user with knowledge of the SNMP public community string can access potentially sensitive data (e.g., user names, passwords) in the

Note: This page contains sample records for the topic "interrupting switch advanced" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

From Packet to Power Switching: Digital Direct Load Scheduling  

E-Print Network (OSTI)

At present, the power grid has tight control over its dispatchable generation capacity but a very coarse control on the demand. Energy consumers are shielded from making price-aware decisions, which degrades the efficiency of the market. This state of affairs tends to favor fossil fuel generation over renewable sources. Because of the technological difficulties of storing electric energy, the quest for mechanisms that would make the demand for electricity controllable on a day-to-day basis is gaining prominence. The goal of this paper is to provide one such mechanisms, which we call Digital Direct Load Scheduling (DDLS). DDLS is a direct load control mechanism in which we unbundle individual requests for energy and digitize them so that they can be automatically scheduled in a cellular architecture. Specifically, rather than storing energy or interrupting the job of appliances, we choose to hold requests for energy in queues and optimize the service time of individual appliances belonging to a broad class whi...

Alizadeh, Mahnoosh; Thomas, Robert J

2012-01-01T23:59:59.000Z

422

Triggering GaAs lock-on switches with laser diode arrays  

Science Conference Proceedings (OSTI)

Many of the applications that require the unique capabilities of Photoconductive Semiconductor Switches (PCSS) demand a compact package. We have been able to demonstrate that GaAs switches operated in the high gain mode called lock-on'' meet the required electrical switching parameters of several such applications using small switch sizes. The only light source that has enough power to trigger a PCSS and is compatible with a small package is a laser diode. This paper will describe the progress that leads to the triggering of high power PCSS switches with laser diodes. Our goal is to switch up to 5 kA in a single shot mode and up to 100 MW repetitively at up to 10 kHz. These goals are feasible since the switches can be used in parallel or in series. Low light level triggering became possible after the discovery of a high electric field, high gain switching mode in GaAs (and later in InP). At electric fields below 3 kV/cm GaAs switches are activated by creation of, at most, only one conduction electron- valence hole pair per photon absorbed in the sample. This linear mode demands high laser power and, after the light is extinguished, the carriers live for only a few nanoseconds. At higher electric fields GaAs behaves as a light activated Zener diode. The laser light generates carriers as in the linear mode and the field induces gain such that the amount of light required to trigger the switch is reduced by a factor of up to 500. The gain continues until the field across the sample drops to a material dependent lock-on field. At this point the switch will carry as much current as, and for as long as, the circuit can maintain the lock-on field. The gain in the switch allows for the use of laser diodes. 8 refs., 11 figs.

Loubriel, G.M.; Helgeson, W.D.; McLaughlin, D.L.; O'Malley, M.W.; Zutavern, F.J. (Sandia National Labs., Albuquerque, NM (USA)); Rosen, A.; Stabile, P.J. (David Sarnoff Research Center, Princeton, NJ (USA))

1990-01-01T23:59:59.000Z

423

Reversible Mode Switching in Y coupled Terahertz Lasers  

E-Print Network (OSTI)

Electrically independent terahertz (THz) quantum cascade lasers (QCLs) are optically coupled in a Y configuration. Dual frequency, electronically switchable emission is achieved in one QCL using an aperiodic grating, designed using computer-generated hologram techniques, incorporated directly into the QCL waveguide by focussed ion beam milling. Multi-moded emission around 2.9 THz is inhibited, lasing instead occurring at switchable grating-selected frequencies of 2.88 and 2.92 THz. This photonic control and switching behaviour is selectively and reversibly transferred to the second, unmodified QCL via evanescent mode coupling, without the transfer of the inherent grating losses.

Marshall, Owen P; Khairuzzaman, Md; Beere, Harvey E; Ritchie, David A

2013-01-01T23:59:59.000Z

424

Klystron switching power supplies for the Internation Linear Collider  

Science Conference Proceedings (OSTI)

The International Linear Collider is a majestic High Energy Physics particle accelerator that will give physicists a new cosmic doorway to explore energy regimes beyond the reach of today's accelerators. ILC will complement the Large Hadron Collider (LHC), a proton-proton collider at the European Center for Nuclear Research (CERN) in Geneva, Switzerland, by producing electron-positron collisions at center of mass energy of about 500 GeV. In particular, the subject of this dissertation is the R&D for a solid state Marx Modulator and relative switching power supply for the International Linear Collider Main LINAC Radio Frequency stations.

Fraioli, Andrea; /Cassino U. /INFN, Pisa

2009-12-01T23:59:59.000Z

425

ICC rail-rate proposal could peril coal switching  

Science Conference Proceedings (OSTI)

New Interstate Commerce Commission guidelines allowing railroads to increase coal-freight rates as much as 15% above inflation could discourage industrial fuel substitution. Final guidelines will be published after the public-comment period. Dropping oil prices have already weakened industry interest in fuel switching. Rail costs already make up 25 to 60% of coal costs, and moves to deregulate rail freight will further raise costs where railroads have a monopoly. New legislation for a slurry pipeline could introduce competition if eminent domain issues are resolved. (DCK)

Betts, M.

1983-03-21T23:59:59.000Z

426

NETL: Advanced Research - Materials  

NLE Websites -- All DOE Office Websites (Extended Search)

High Performance Materials > Chrome Oxide Refractory High Performance Materials > Chrome Oxide Refractory Advanced Research High Performance Materials Chrome Oxide Refractory One notable NETL success is the development of a chrome oxide refractory material capable of working in slagging gasifier conditions. In this project, researchers first determined that one of the major failure mechanisms for chrome oxide refractories exposed to the intense heat and corrosive environment was spalling, or the chipping or flaking of refractory material from an exposed face. They used this information to formulate a high-chrome oxide refractory composition that resists spalling, resulting in a refractory with a longer service life in the gasifier. Inside an ultrasupercritical (USC) pulverized coal power plant, materials are exposed to temperatures up to 760°C and pressures up to 5,000 psi. Operating a USC system can improve power plant efficiency up to 47% and reduce emissions. However, finding boiler and turbine materials that can hold up under extreme conditions requires new high-temperature metal alloys and ceramic coatings, as well as computational modeling research to optimize the processing of these materials. Advanced Research Materials Development program successes in this area include the following:

427

Advanced PFBC transient analysis  

SciTech Connect

Transient modeling and analysis of advanced Pressurized Fluidized Bed Combustion (PFBC) systems is a research area that is currently under investigation by the US Department of Energy`s Federal Energy Technology Center (FETC). The object of the effort is to identify key operating parameters that affect plant performance and then quantify the basic response of major sub-systems to changes in operating conditions. PC-TRAX{trademark}, a commercially available dynamic software program, was chosen and applied in this modeling and analysis effort. This paper describes the development of a series of TRAX-based transient models of advanced PFBC power plants. These power plants burn coal or other suitable fuel in a PFBC, and the high temperature flue gas supports low-Btu fuel gas or natural gas combustion in a gas turbine topping combustor. When it is utilized, the low-Btu fuel gas is produced in a bubbling bed carbonizer. High temperature, high pressure combustion products exiting the topping combustor are expanded in a modified gas turbine to generate electrical power. Waste heat from the system is used to raise and superheat steam for a reheat steam turbine bottoming cycle that generates additional electrical power. Basic control/instrumentation models were developed and modeled in PC-TRAX and used to investigate off-design plant performance. System performance for various transient conditions and control philosophies was studied.

White, J.S. [Parsons Power Group, Inc., Reading, PA (United States); Bonk, D.L. [USDOE Federal Energy Technology Center, Morgantown, WV (United States)

1997-05-01T23:59:59.000Z

428

Advanced PFBC transient analysis  

SciTech Connect

Transient modeling and analysis of Advanced Pressurized Fluidized Bed Combustion (PFBC) systems is a research area that is currently under investigative study by the United States Department of Energy`s Morgantown Energy Technology Center (METC). The object of the effort is to identify key operating parameters affecting plant performance and then quantify the basic response of major sub-systems to changes in operating conditions. PC-TRAX, a commercially available dynamic software program, was chosen and applied in this modeling and analysis effort. This paper summarizes and describes the development of a series of TRAX-based transient models of Advanced PFBC power plants. These power plants generate a high temperature flue gas by burning coal or other suitable fuel in a PFBC. The high temperature flue gas supports low-Btu fuel gas or natural gas combustion in a gas turbine topping combustor. When utilized, low-Btu fuel gas is produced in a bubbling bed carbonizer. High temperature, high pressure combustion products exiting the topping combustor are expanded in a modified gas turbine to generate electrical power. Waste heat from the system is used to generate and superheat steam for a reheat steam turbine bottoming cycle that generates additional electrical power. Basic control/instrumentation models were developed and modeled in PC-TRAX and used to investigate off-design plant performance. System performance for various transient conditions and control philosophies was studied.

White, J.S. [Parsons Power Group, Inc., Reading, PA (United States); Bonk, D.L.; Rogers, L. [USDOE Morgantown Energy Technology Center, WV (United States)

1996-12-31T23:59:59.000Z

429

Advanced converter reactors  

SciTech Connect

Advanced converter reactors (ACRs) of primary US interest are those which can be commercialized within about 20 years, and are: Advanced Light-Water Reactors, Spectral-Shift-Control Reactors, Heavy-Water Reactors (CANDU type), and High-Temperature Gas-Cooled Reactors. These reactors can operate on uranium, thorium, or uranium-thorium fuel cycles, but have the greatest fuel utilization on thorium type cycles. The water reactors tend to operate more economically on uranium cycles, while the HTGR is more economical on thorium cycles. Thus, the HTGR had the greatest practical potential for improving fuel utilization. If the US has 3.4 to 4 million tons U/sub 3/O/sub 8/ at reasonable costs, ACRs can make important contributions to maintaining a high nuclear power level for many decades; further, they work well with fast breeder reactors in the long term under symbiotic fueling conditions. Primary nuclear data needs of ACRs are integral measurements of reactivity coefficients and resonance absorption integrals.

Kasten, P.R.

1979-01-01T23:59:59.000Z

430

Advanced Metering Infrastructure  

SciTech Connect

The report provides an overview of the development of Advanced Metering Infrastructure (AMI). Metering has historically served as the cash register for the utility industry. It measured the amount of energy used and supported the billing of customers for that usage. However, utilities are starting to look at meters in a whole different way, viewing them as the point of contact with customers in supporting a number of operational imperatives. The combination of smart meters and advanced communications has opened up a variety of methods for utilities to reduce operating costs while offering new services to customers. A concise look is given at what's driving interest in AMI, the components of AMI, and the creation of a business case for AMI. Topics covered include: an overview of AMI including the history of metering and development of smart meters; a description of the key technologies involved in AMI; a description of key government initiatives to support AMI; an evaluation of the current market position of AMI; an analysis of business case development for AMI; and, profiles of 21 key AMI vendors.

NONE

2007-10-15T23:59:59.000Z

431

Advanced desiccant materials research  

DOE Green Energy (OSTI)

The long-range goal of this task is to understand the role of surface phenomena in desiccant cooling materials. The background information includes a brief introduction to desiccant cooling systems (DCS) and the role of the desiccant as a system component. The purpose, background, rationale, and long-term technical approach for studying advanced desiccant materials are then treated. Experimental methods for measuring water vapor sorption by desiccants are described, and the rationale is then given for choosing a quartz crystal microbalance (QCM) for measuring sorption isotherms, rates, and cyclic stability. Background information is given about the QCM, including the quartz crystal resonator itself, the support structure for the quartz crystal, and the advantages and limitations of a QCM. The apparatus assembled and placed into operation during CY 1985 is described. The functions of the principal components of the equipment, i.e., the QCM, vacuum system, pressure gauges, residual gas analyzer, constant temperature bath, and data acquisition system, are described as they relate to the water vapor sorption measurements now under way. The criteria for narrowing the potential candidates as advanced desiccant materials for the initial studies are given. Also given is a list of 20 principal candidate materials identified based on the criteria and data available in the literature.

Czanderna, A.W.; Thomas, T.M.

1986-05-01T23:59:59.000Z

432

Stabilizing control of parallel AC-DC power transmission systems by approximate switching curve  

SciTech Connect

A method to improve the transient stability of bulk power transmission system is presented. The method stabilizes the control of parallel ac-dc transmission systems using an approximate switching curve. The optimal switching curve is approximated by a power series and the resulting switching curve is determined independent of type and duration of faults that occur to the system. In addition, coefficients of the switching curve can be calculated on a off-line basis which allows use of simple on-line algebraic calculations in emergency conditions.

Ichiyanagi, K.; Kobayashi, H.; Kakehu, H.

1980-01-01T23:59:59.000Z

433

Diode Pumped Actively Q switched Tm:YAG Ring Laser Operation at ...  

Science Conference Proceedings (OSTI)

May 3, 2010 ... by using the compound parabolic concentrator in. 2002 [12]. However, there's less reports on Q switched operation of Tm:YAG laser. Low gain...

434

A dual-channel flux-switching permanent magnet motor for hybrid electric vehicles  

Science Conference Proceedings (OSTI)

The flux-switching permanent magnet (FSPM) motor is a relatively novel brushless machine having both magnets and concentrated windings in the stator

Wei Hua; Zhongze Wu; Ming Cheng; Baoan Wang; Jianzhong Zhang; Shigui Zhou

2012-01-01T23:59:59.000Z

435

Resonant snubber based soft-switching inverters for electric propulsion drives  

SciTech Connect

This paper summarizes recently developed soft-switching inverters and proposes two alternative options for electric propulsion drives. The newly developed soft-switching inverter employs an auxiliary switch and a resonant inductor per phase to produce a zero voltage across the main switch so that the main switch can turn on at the zero-voltage condition. Both the auxiliary switch and the resonant inductor are operating at a fractional duty, and thus are small in size as compared to the main inverter circuit components. Operation modes in a complete zero-voltage switching cycle for the single-phase soft-switching inverter are described in detail with graphical explanations. The circuit operation was first verified by a computer simulation and then tested with an 1-kW single-phase and an 100-kW three-phase inverters. Experimental results are presented to show the superior performance in efficiency improvement, EMI reduction, and dv/dt reduction of the proposed soft-switching inverters.

Lai, J.S.

1996-05-01T23:59:59.000Z

436

ADVANCED TURBINE SYSTEMS PROGRAM  

SciTech Connect

Natural gas combustion turbines are rapidly becoming the primary technology of choice for generating electricity. At least half of the new generating capacity added in the US over the next twenty years will be combustion turbine systems. The Department of Energy has cosponsored with Siemens Westinghouse, a program to maintain the technology lead in gas turbine systems. The very ambitious eight year program was designed to demonstrate a highly efficient and commercially acceptable power plant, with the ability to fire a wide range of fuels. The main goal of the Advanced Turbine Systems (ATS) Program was to develop ultra-high efficiency, environmentally superior and cost effective competitive gas turbine systems for base load application in utility, independent power producer and industrial markets. Performance targets were focused on natural gas as a fuel and included: System efficiency that exceeds 60% (lower heating value basis); Less than 10 ppmv NO{sub x} emissions without the use of post combustion controls; Busbar electricity that are less than 10% of state of the art systems; Reliability-Availability-Maintainability (RAM) equivalent to current systems; Water consumption minimized to levels consistent with cost and efficiency goals; and Commercial systems by the year 2000. In a parallel effort, the program was to focus on adapting the ATS engine to coal-derived or biomass fuels. In Phase 1 of the ATS Program, preliminary investigators on different gas turbine cycles demonstrated that net plant LHV based efficiency greater than 60% was achievable. In Phase 2 the more promising cycles were evaluated in greater detail and the closed-loop steam-cooled combined cycle was selected for development because it offered the best solution with least risk for achieving the ATS Program goals for plant efficiency, emissions, cost of electricity and RAM. Phase 2 also involved conceptual ATS engine and plant design and technology developments in aerodynamics, sealing, combustion, cooling, materials, coatings and casting development. The market potential for the ATS gas turbine in the 2000-2014 timeframe was assessed for combined cycle, simple cycle and integrated gasification combined cycle, for three engine sizes. The total ATS market potential was forecasted to exceed 93 GW. Phase 3 and Phase 3 Extension involved further technology development, component testing and W501ATS engine detail design. The technology development efforts consisted of ultra low NO{sub x} combustion, catalytic combustion, sealing, heat transfer, advanced coating systems, advanced alloys, single crystal casting development and determining the effect of steam on turbine alloys. Included in this phase was full-load testing of the W501G engine at the McIntosh No. 5 site in Lakeland, Florida.

Gregory Gaul

2004-04-21T23:59:59.000Z

437

Vehicle Technologies Office: Advanced Combustion Engines  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Combustion Advanced Combustion Engines to someone by E-mail Share Vehicle Technologies Office: Advanced Combustion Engines on Facebook Tweet about Vehicle Technologies Office: Advanced Combustion Engines on Twitter Bookmark Vehicle Technologies Office: Advanced Combustion Engines on Google Bookmark Vehicle Technologies Office: Advanced Combustion Engines on Delicious Rank Vehicle Technologies Office: Advanced Combustion Engines on Digg Find More places to share Vehicle Technologies Office: Advanced Combustion Engines on AddThis.com... Just the Basics Hybrid & Vehicle Systems Energy Storage Advanced Power Electronics & Electrical Machines Advanced Combustion Engines Combustion Engines Emission Control Waste Heat Recovery Fuels & Lubricants Materials Technologies Advanced Combustion Engines

438

Advanced Reactor Technologies | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Advanced Reactor Advanced Reactor Technologies Advanced Reactor Technologies Advanced Reactor Technologies Advanced Reactor Technologies The Office of Advanced Reactor Technologies (ART) sponsors research, development and deployment (RD&D) activities through its Next Generation Nuclear Plant (NGNP), Advanced Reactor Concepts (ARC), and Advanced Small Modular Reactor (aSMR) programs to promote safety, technical, economical, and environmental advancements of innovative Generation IV nuclear energy technologies. The Office of Nuclear Energy (NE) will pursue these advancements through RD&D activities at the Department of Energy (DOE) national laboratories and U.S. universities, as well as through collaboration with industry and international partners. These activities will focus on advancing scientific

439

Chemistry & Physics at Interfaces | Advanced Materials | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

from Atoms to Systems Materials Characterization Materials Theory and Simulation Energy Frontier Research Centers Advanced Materials Home | Science & Discovery | Advanced...

440

Advanced Materials and Processes for Extreme Environments  

Science Conference Proceedings (OSTI)

Symposium, Advanced Materials and Reservoir Engineering for Extreme Oil & Gas Environments. Presentation Title, Advanced Materials and Processes for...

Note: This page contains sample records for the topic "interrupting switch advanced" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Advanced Materials Technologies - Energy Innovation Portal  

Advanced Materials Technology Marketing Summaries Here youll find marketing summaries of advanced materials technologies available for licensing from ...

442

Irradiation Performance of Advanced and Model Alloys  

Science Conference Proceedings (OSTI)

Mar 14, 2012 ... Mechanical Performance of Materials for Current and Advanced Nuclear Reactors: Irradiation Performance of Advanced and Model Alloys

443

Advanced Metering Infrastructure Security Considerations | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Metering Infrastructure Security Considerations Advanced Metering Infrastructure Security Considerations The purpose of this report is to provide utilities implementing Advanced...

444

News and Awards | Advanced Materials | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Events and Conferences Supporting Organizations Advanced Materials Home | Science & Discovery | Advanced Materials | News & Awards SHARE News and Awards Latest News...

445

Advanced Technology Vehicles Manufacturing Incentive Program...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Technology Vehicles Manufacturing Incentive Program Advanced Technology Vehicles Manufacturing Incentive Program A fact sheet detailling the advanced technology vehicles...

446

Advanced Light Source Activity Report 2002  

E-Print Network (OSTI)

ALS and the Advanced Photon Source (APS). The LDLR crystals,Director for the Advanced Photon Source (APS), and Steven

Duque editor, Theresa; Greiner editor, Annette; Moxon editor, Elizabeth; Robinson editor, Arthur; Tamura editor, Lori

2003-01-01T23:59:59.000Z

447

Electrically operated magnetic switch designed to display reduced leakage inductance  

DOE Patents (OSTI)

An electrically operated magnetic switch is disclosed herein for use in opening and closing a circuit between two terminals depending upon the voltage across these terminals. The switch so disclosed is comprised of a ferrite core in the shape of a toroid having opposing ends and opposite inner and outer sides and an arrangement of electrically conductive components defining at least one current flow path which makes a number of turns around the core. This arrangement of components includes a first plurality of electrically conducive rigid rods parallel with and located outside the outer side of the core and a second plurality of electrically conductive rigid rods parallel with and located inside the inner side of the core. The arrangement also includes means for electrically connecting these rods together so that the define the current flow path. In one embodiment, this latter means uses rigid cross-tab means. In another, preferred embodiment, printed circuits on rigid dielectric substrates located on opposite ends of the core are utilized to interconnect the rods together.

Cook, Edward G. (Livermore, CA)

1994-01-01T23:59:59.000Z

448

Electrically operated magnetic switch designed to display reduced leakage inductance  

DOE Patents (OSTI)

An electrically operated magnetic switch is disclosed herein for use in opening and closing a circuit between two terminals depending upon the voltage across these terminals. The switch so disclosed is comprised of a ferrite core in the shape of a toroid having opposing ends and opposite inner and outer sides and an arrangement of electrically conductive components defining at least one current flow path which makes a number of turns around the core. This arrangement of components includes a first plurality of electrically conducive rigid rods parallel with and located outside the outer side of the core and a second plurality of electrically conductive rigid rods parallel with and located inside the inner side of the core. The arrangement also includes means for electrically connecting these rods together so that the define the current flow path. In one embodiment, this latter means uses rigid cross-tab means. In another, preferred embodiment, printed circuits on rigid dielectric substrates located on opposite ends of the core are utilized to interconnect the rods together. 10 figures.

Cook, E.G.

1994-05-10T23:59:59.000Z

449

Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

Home Home Group Members Accelerator Magnets Insertion Devices Facilities Presentations & Publications Internal Magnetic Devices Group The primary mission of the Magnetic Devices (MD) Group is to design, build, and maintain Insertion Devices (IDs) that are reliable and transparent to the electron beam at the Advanced Photon Source (APS). The majority of IDs at the APS are conventional planar hybrid undulators, but an essential part of the mission is to develop novel IDs, such as short-period superconducting undulators and long-period electromagnetic undulators. The capabilities of APS IDs are matched to users' experimental needs. The mission also includes magnetic tuning of the IDs to ensure their near-ideal performance as x-ray sources and calculations to predict the radiation

450

Visiting | Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

Visiting the APS Visiting the APS If you have questions or need assistance planning your visit, please contact the APS User Office. Obtaining site access: General info: Visitors and new users | Non-U.S. Citizens Visitor registration: request access as a visitor who will not do hands-on work (guests, family members, students, etc.) Traveling to the APS: Transportation: Resources | University of Chicago Shuttle external link Directions: to Argonne | to the APS User Office Maps: Argonne Campus external link | Conference Center (402) | APS Facility & Beamlines | Parking Currency: The hotels and banks near Argonne do not exchange currency. Plan on using major credit cards, U.S. traveler's checks, or exchange currency in advance at the airport. See also: The Universal Currency Converter(tm) external link

451

Welcome | Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

Welcome Welcome Aerial view of APS Aerial view of the APS Welcome to the Advanced Photon Source (APS) at Argonne National Laboratory. Whether you are a current or potential scientific user of our unique facility or are simply interested in learning more about the APS, we are delighted that you are visiting our website. The APS is funded by the Office of Science, Office of Basic Energy Sciences in the U.S. Department of Energy. We operate a National User Facility that is open to everyone who has a need for extremely brilliant x-ray photon beams. The APS is one of the most technologically complex machines in the world. This premier national research facility provides the brightest x-ray beams in the Western Hemisphere to more than 5,000 (and growing) scientists from

452

Advanced Containment System  

SciTech Connect

An advanced containment system for containing buried waste and associated leachate. A trench is dug on either side of the zone of interest containing the buried waste so as to accommodate a micro tunnel boring machine. A series of small diameter tunnels are serially excavated underneath the buried waste. The tunnels are excavated by the micro tunnel boring machine at a consistent depth and are substantially parallel to each other. As tunneling progresses, steel casing sections are connected end to end in the excavated portion of the tunnel so that a steel tube is formed. Each casing section has complementary interlocking structure running its length that interlocks with complementary interlocking structure on the adjacent casing section. Thus, once the first tube is emplaced, placement of subsequent tubes is facilitated by the complementary interlocking structure on the adjacent, previously placed, casing sections.

Kostelnik, Kevin M. (Idaho Falls, ID); Kawamura, Hideki (Tokyo, JP); Richardson, John G. (Idaho Falls, ID); Noda, Masaru (Tokyo, JP)

2005-05-24T23:59:59.000Z

453

Advanced Containment System  

SciTech Connect

An advanced containment system for containing buried waste and associated leachate. A trench is dug on either side of the zone of interest containing the buried waste so as to accommodate a micro tunnel boring machine. A series of small diameter tunnels are serially excavated underneath the buried waste. The tunnels are excavated by the micro tunnel boring machine at a consistent depth and are substantially parallel to each other. As tunneling progresses, steel casing sections are connected end to end in the excavated portion of the tunnel so that a steel tube is formed. Each casing section has complementary interlocking structure running its length that interlocks with complementary interlocking structure on the adjacent casing section. Thus, once the first tube is emplaced, placement of subsequent tubes is facilitated by the complementary interlocking structure on the adjacent, previously placed, casing sections.

Kostelnik, Kevin M. (Idaho Falls, ID); Kawamura, Hideki (Tokyo, JP); Richardson, John G. (Idaho Falls, ID); Noda, Masaru (Tokyo, JP)

2004-10-12T23:59:59.000Z

454

Advanced drilling systems study.  

Science Conference Proceedings (OSTI)

This report documents the results of a study of advanced drilling concepts conducted jointly for the Natural Gas Technology Branch and the Geothermal Division of the U.S. Department of Energy. A number of alternative rock cutting concepts and drilling systems are examined. The systems cover the range from current technology, through ongoing efforts in drilling research, to highly speculative concepts. Cutting mechanisms that induce stress mechanically, hydraulically, and thermally are included. All functions necessary to drill and case a well are considered. Capital and operating costs are estimated and performance requirements, based on comparisons of the costs for alternative systems to conventional drilling technology, are developed. A number of problems common to several alternatives and to current technology are identified and discussed.

Pierce, Kenneth G.; Livesay, Billy Joe; Finger, John Travis (Livesay Consultants, Encintas, CA)

1996-05-01T23:59:59.000Z

455

ADVANCED CUTTINGS TRANSPORT STUDY  

DOE Green Energy (OSTI)

This report includes a review of the progress made in ACTF Flow Loop development and research during 90 days pre-award period (May 15-July 14, 1999) and the following three months after the project approval date (July15-October 15, 1999) The report presents information on the following specific subjects; (a) Progress in Advanced Cuttings Transport Facility design and development, (b) Progress report on the research project ''Study of Flow of Synthetic Drilling Fluids Under Elevated Pressure and Temperature Conditions'', (c) Progress report on the research project ''Study of Cuttings Transport with Foam Under LPAT Conditions (Joint Project with TUDRP)'', (d) Progress report on the research project ''Study of Cuttings Transport with Aerated Muds Under LPAT Conditions (Joint Project with TUDRP)'', (e) Progress report on the research project ''Study of Foam Flow Behavior Under EPET Conditions'', (f) Progress report on the instrumentation tasks (Tasks 11 and 12) (g) Activities towards technology transfer and developing contacts with oil and service company members.

Ergun Kuru; Stefan Miska; Nicholas Takach; Kaveh Ashenayi; Gerald Kane; Len Volk; Mark Pickell; Evren Ozbayoglu; Barkim Demirdal; Paco Vieira; Affonso Lourenco

1999-10-15T23:59:59.000Z

456

Advanced Telemetry Data Capturing  

SciTech Connect

This project developed a new generation or advanced data capturing process specifically designed for use in future telemetry test systems at the Kansas City Plant (KCP). Although similar data capturing processes are performed both commercially and at other DOE weapon facilities, the equipment used is not specifically designed to perform acceptance testing requirements unique to the KCP. Commercially available equipment, despite very high cost (up to $125,000), is deficient in reliability and long-term maintainability necessary in test systems at this facility. There are no commercial sources for some requirements, specifically Terminal Data Analyzer (TDA) data processing. Although other custom processes have been developed to satisfy these test requirements, these designs have become difficult to maintain and upgrade.

Paschke, G.A.

2000-05-16T23:59:59.000Z

457

Advancing Residential Energy Retrofits  

Science Conference Proceedings (OSTI)

To advance the market penetration of residential retrofits, Oak Ridge National Laboratory (ORNL) and Southface Energy Institute (Southface) partnered to provide technical assistance on nine home energy retrofits in metropolitan Atlanta with simulated source energy savings of 30% to 50%. Retrofit measures included duct sealing, air infiltration reductions, attic sealing and roofline insulation, crawlspace sealing, HVAC and water heating equipment replacement, and lighting and appliance upgrades. This paper will present a summary of these measures and their associated impacts on important home performance metrics, such as air infiltration and duct leakage. The average estimated source energy savings for the homes is 33%, and the actual heating season average savings is 32%. Additionally, a case study describing expected and realized energy savings of completed retrofit measures of one of the homes is described in this paper.

Jackson, Roderick K [ORNL; Boudreaux, Philip R [ORNL; Kim, Eyu-Jin [Southface Energy Institute; Roberts, Sydney [Southface Energy Institute

2012-01-01T23:59:59.000Z

458

Advanced Manufacturing Office: Motor Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Motor Systems to Motor Systems to someone by E-mail Share Advanced Manufacturing Office: Motor Systems on Facebook Tweet about Advanced Manufacturing Office: Motor Systems on Twitter Bookmark Advanced Manufacturing Office: Motor Systems on Google Bookmark Advanced Manufacturing Office: Motor Systems on Delicious Rank Advanced Manufacturing Office: Motor Systems on Digg Find More places to share Advanced Manufacturing Office: Motor Systems on AddThis.com... Quick Links Energy Resource Center Technical Publications by Energy System Energy-Efficient Technologies Incentives & Resources by Zip Code Better Plants Superior Energy Performance Contacts Motor Systems Photo of Man Checking Motor Performance Motor-driven equipment accounts for 54% of manufacturing electricity use. Dramatic energy and cost savings can be achieved in motor systems by

459

Design of a Command-Triggered Plasma Opening Switch for Terawatt Applications  

DOE Green Energy (OSTI)

Inductive energy storage systems can have high energy density, lending to smaller, less expensive systems. The crucial element of an inductive energy storage system is the opening switch. This switch must conduct current while energy is stored in an inductor, then open quickly to transfer this energy to a load. Plasma can perform this function. The Plasma Opening Switch (POS) has been studied for more than two decades. Success with the conventional plasma opening switch has been limited. A system designed to significantly improve the performance of vacuum opening switches is described in this paper. The gap cleared of plasma is a rough figure-of-merit for vacuum opening switches. Typical opened gaps of 3 mm are reported for conventional switches. The goal for the system described in this paper is more than 3 cm. To achieve this, the command-triggered POS adds an active opening mechanism, which allows complete separation of conduction and opening. This separation is advantageous because of the widely different time scales of conduction and opening. The detrimental process of magnetic field penetration into the plasma during conduction is less important in this switch. The opening mechanism duration is much shorter than the conduction time, so penetration during opening is insignificant. Opening is accomplished with a fast magnetic field that pushes plasma out of the switch region. Plasma must be removed from the switch region to allow high voltage. This paper describes some processes important during conduction and opening, and show calculations on the trigger requirements. The design of the switch is shown. This system is designed to demonstrate both improved performance and nanosecond output jitter at levels greater than one terawatt. An amplification mechanism is described which reduces the trigger energy. Particle-in-cell simulations of the system are also shown.

SAVAGE,MARK E.; MENDEL,C.W.; SEIDEL,DAVID B.

1999-10-29T23:59:59.000Z

460

Low noise Millimeter-wave and THz Receivers, Imaging Arrays, Switches in Advanced CMOS and SiGe Processes /  

E-Print Network (OSTI)

schematic and (b) G-CPW transmission line (Z 0 = 60 ?, alldesigns and (b) transmission line electrical length (?) forantenna and 50 ? G-CPW transmission line are also shown. All

Uzunkol, Mehmet

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "interrupting switch advanced" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Advanced Distribution Automation Technical Assessments  

Science Conference Proceedings (OSTI)

This 2008 progress report on advanced distribution technical assessments focused on the International Electrotechnical Commission (IEC) TC-57 body of standards.

2008-12-19T23:59:59.000Z

462

Advanced Coal Conversion Process Demonstration  

NLE Websites -- All DOE Office Websites (Extended Search)

Clean Coal Technology Program Advanced Coal Conversion Process Demonstration A DOE Assessment DOENETL-20051217 U.S. Department of Energy Office of Fossil Energy National Energy...

463

Video Library | Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

Archives APS Brochure Annual Reports Posters Podcasts Image Gallery external site Video Library Syndicated Feeds (RSS) Now Playing: The Advanced Photon Source More videos:...

464

Video Library | Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

Video Library Related Links: APS Colloquium APS Podcasts APS Today More videos: Introduction to the APS Physics of the Blues Now Playing: Building the Advanced Photon Source This...

465

Systems Engineering Advancement Research Initiative  

E-Print Network (OSTI)

strategic partners Define and research fundamental concepts for advanced system engineering Contribute materials, and handbooks to inspire, inform, and guide students and practitioners VENUE SEAri is located

de Weck, Olivier L.

466

User Information | Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

User Information The Advanced Photon Source provides a variety of guides, resources, and information for prospective, new, and current users. In this section: For Prospective Users...

467

Avoid advanced control project mistakes  

Science Conference Proceedings (OSTI)

On-line process optimization is worth working for but without robust advanced controls it will never happen. In this paper, the author evaluates how well advanced controls worked in five refineries. Having spent money on such projects, the refineries faced a situation in which there was no measurable improvement in overall plant performance. These refineries are owned by different companies, yet they share a pattern of mistakes in administrating advanced controls. Highlighting these mistakes shows ways to improve the organization of advanced control technology, to avoid obvious pitfalls.

Friedman, Y.Z. (Petrocontrol, Madison, NJ (United States))

1992-10-01T23:59:59.000Z

468

Advanced Application Development Program Information  

Energy.gov (U.S. Department of Energy (DOE))

Summary of the Tranmission Reliability program's Advanced Applications Research and Development activity area. This program develops and demonstrates tools to monitor and control the grid with...

469

Advanced Manufacturing Office: Information Resources  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

incentives, tools, and training to help companies of all sizes identify energy saving projects and chart a path toward continuous energy improvement. Advanced Manufacturing...

470

Advanced Materials Research Highlights | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Materials | Research Highlights Research Highlights 1-10 of 44 Results Prev 12345 Next Topotactic valence state control in epitaxial multivalent oxides July 17, 2013 -...

471

Advanced Cladding Materials for Fuels  

Science Conference Proceedings (OSTI)

Fuel Cycle Research and Development. Advanced Cladding Materials for. Fuels. Stuart A. Maloy. M. Nastasi, A. Misra. Los Alamos National Laboratory.

472

Media Center | Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

impact on nearly every aspect of our lives. Annual Reports Articles on Advanced Photon Source research and engineering highlights that are written for the interested...

473

Information Technology | Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Photon Source Information Technology Support Search APS ... Search Button About User Information News & Events Science & Education Beamlines Divisions Argonne Home >...

474

Advanced Flow-Battery Systems  

Science Conference Proceedings (OSTI)

Presentation Title, Advanced Flow-Battery Systems ... Abstract Scope, Flow- battery systems (FBS) were originally developed over 30 years ago and have since...

475

Vulnerabilities in Advanced Metering Infrastructure.  

E-Print Network (OSTI)

??Smart grid has become a reality in the United States. Billions of dollars are being poured into deploying a major component, - the Advanced Metering (more)

Podkuiko, Dmitry

2012-01-01T23:59:59.000Z

476

CAT Communicator | Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

Division XSD Groups Industry Argonne Home Advanced Photon Source News Archives CAT Communicator CAT Communicator was a newsletter intended to provide APS information to...

477

Participant Advance Information PLEASE PRINT!  

Science Conference Proceedings (OSTI)

... Hotel Workshop participants may select from a ... for a listing of area hotels: http://www ... of Education, Department of Energy's Advanced Manufacturing ...

2013-01-23T23:59:59.000Z

478

NREL: Advanced Power Electronics - Webmaster  

NLE Websites -- All DOE Office Websites (Extended Search)

Your name: Your email address: Your message: Send Message Printable Version Advanced Power Electronics Home About the Project Technology Basics Research & Development...

479

Advanced Hydrogen Turbine Development  

DOE Green Energy (OSTI)

Siemens has developed a roadmap to achieve the DOE goals for efficiency, cost reduction, and emissions through innovative approaches and novel technologies which build upon worldwide IGCC operational experience, platform technology, and extensive experience in G-class operating conditions. In Phase 1, the technologies and concepts necessary to achieve the program goals were identified for the gas turbine components and supporting technology areas and testing plans were developed to mitigate identified risks. Multiple studies were conducted to evaluate the impact in plant performance of different gas turbine and plant technologies. 2015 gas turbine technologies showed a significant improvement in IGCC plant efficiency, however, a severe performance penalty was calculated for high carbon capture cases. Thermodynamic calculations showed that the DOE 2010 and 2015 efficiency targets can be met with a two step approach. A risk management process was instituted in Phase 1 to identify risk and develop mitigation plans. For the risks identified, testing and development programs are in place and the risks will be revisited periodically to determine if changes to the plan are necessary. A compressor performance prediction has shown that the design of the compressor for the engine can be achieved with additional stages added to the rear of the compressor. Tip clearance effects were studied as well as a range of flow and pressure ratios to evaluate the impacts to both performance and stability. Considerable data was obtained on the four candidate combustion systems: diffusion, catalytic, premix, and distributed combustion. Based on the results of Phase 1, the premixed combustion system and the distributed combustion system were chosen as having the most potential and will be the focus of Phase 2 of the program. Significant progress was also made in obtaining combustion kinetics data for high hydrogen fuels. The Phase 1 turbine studies indicate initial feasibility of the advanced hydrogen turbine that meets the aggressive targets set forth for the advanced hydrogen turbine, including increased rotor inlet temperature (RIT), lower total cooling and leakage air (TCLA) flow, higher pressure ratio, and higher mass flow through the turbine compared to the baseline. Maintaining efficiency with high mass flow Syngas combustion is achieved using a large high AN2 blade 4, which has been identified as a significant advancement beyond the current state-of-the-art. Preliminary results showed feasibility of a rotor system capable of increased power output and operating conditions above the baseline. In addition, several concepts were developed for casing components to address higher operating conditions. Rare earth modified bond coat for the purpose of reducing oxidation and TBC spallation demonstrated an increase in TBC spallation life of almost 40%. The results from Phase 1 identified two TBC compositions which satisfy the thermal conductivity requirements and have demonstrated phase stability up to temperatures of 1850 C. The potential to join alloys using a bonding process has been demonstrated and initial HVOF spray deposition trials were promising. The qualitative ranking of alloys and coatings in environmental conditions was also performed using isothermal tests where significant variations in alloy degradation were observed as a function of gas composition. Initial basic system configuration schematics and working system descriptions have been produced to define key boundary data and support estimation of costs. Review of existing materials in use for hydrogen transportation show benefits or tradeoffs for materials that could be used in this type of applications. Hydrogen safety will become a larger risk than when using natural gas fuel as the work done to date in other areas has shown direct implications for this type of use. Studies were conducted which showed reduced CO{sub 2} and NOx emissions with increased plant efficiency. An approach to maximize plant output is needed in order to address the DOE turbine goal for 20-30% reduction o

Joesph Fadok

2008-01-01T23:59:59.000Z

480

Integration of planar transformer and/or planar inductor with power switches in power converter  

DOE Patents (OSTI)

A power converter integrates at least one planar transformer comprising a multi-layer transformer substrate and/or at least one planar inductor comprising a multi-layer inductor substrate with a number of power semiconductor switches physically and thermally coupled to a heat sink via one or more multi-layer switch substrates.

Chen, Kanghua (Canton, MI); Ahmed, Sayeed (Canton, MI); Zhu, Lizhi (Canton, MI)

2007-10-30T23:59:59.000Z

Note: This page contains sample records for the topic "interrupting switch advanced" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Dynamic load balancing in IP-over-WDM optical burst switching networks  

Science Conference Proceedings (OSTI)

In this paper, we consider the problem of dynamic load balancing in wavelength division multiplexing (WDM)-based optical burst switching (OBS) networks. We propose a load balancing scheme based on adaptive alternate routing aimed at reducing burst loss. ... Keywords: Load balancing, Optical burst switching, Traffic engineering, Wavelength division multiplexing

J. Li; G. Mohan; K. C. Chua

2005-02-01T23:59:59.000Z

482

Providing quality of service over high speed electronic and optical switches  

E-Print Network (OSTI)

In a network, multiple links are interconnected by means of switches. A switch is a device with multiple input and output links, and its job is to move data from the input links to the output links. In this thesis, we focus ...

Koksal, Can Emre, 1975-

2003-01-01T23:59:59.000Z

483

Modeling and analysis of mobility management state of packet-switched (PS) services in GPRS  

Science Conference Proceedings (OSTI)

There has been an increasing demand for wireless data services due to the popularity of Internet services and circuit-switched (CS) systems are not appropriate for accommodating bursty data traffic. The wireless data services can be efficiently supported ... Keywords: General Packet Radio Service, Location update, Mobile station state management, Mobility management, Packet-switched services, Paging

Yun Won Chung; Ho Young Hwang; Dan Keun Sung

2006-12-01T23:59:59.000Z

484

An event-driven simulation methodology for integrated switching power supplies in SystemVerilog  

Science Conference Proceedings (OSTI)

Emerging power-supply-on-chip applications such as on-chip DC-DC conversion, energy harvesting, and LED drivers use switching regulator ICs integrated with digital controllers. Although the resulting mixed-signal systems call for efficient system-level ... Keywords: behavioral modeling, event-driven simulation, switching-mode power supplies, systemverilog

Ji Eun Jang, Myeongjae Park, Jaeha Kim

2013-05-01T23:59:59.000Z

485

High-speed buffer management for 40 Gb/s-based photonic packet switches  

Science Conference Proceedings (OSTI)

We develop a method of high-speed buffer management for output-buffered photonic packet switches. The use of optical fiber delay lines is a promising solution to constructing optical buffers. The buffer manager determines packet delays in the fiber delay ... Keywords: buffer management, parallel processing, photonic packet switching, pipeline processing, variable-length optical packet

Hiroaki Harai; Masayuki Murata

2006-02-01T23:59:59.000Z

486

PERFORMANCE ENHANCEMENT OF WIND TURBINE POWER REGULATION BY SWITCHED LINEAR CONTROL  

E-Print Network (OSTI)

PERFORMANCE ENHANCEMENT OF WIND TURBINE POWER REGULATION BY SWITCHED LINEAR CONTROL D.J.Leith W Power regulation of horizontal-axis grid-connected up-wind constant-speed pitch-regulated wind turbines, switched linear control is more suited for application to wind turbines than the nonlinear control strategy

Duffy, Ken

487

Functional verification of a frequency-programmable switch chip with asynchronous clock sections  

Science Conference Proceedings (OSTI)

An integral part of the IBM eServerTM z990 I/O subsystem is the self-timed interface (STI) switch chip. The STI switch is an application-specific integrated circuit (ASIC) designed to provide high I/O connectivity and high bandwidth within ...

B. Hoppe; B. Arthur-Mensah; E. W. Chencinski; S. Joseph; H. Kumar; J. F. Silverio

2004-05-01T23:59:59.000Z

488

Simultaneous fault and mode switching identification for hybrid systems based on particle swarm optimization  

Science Conference Proceedings (OSTI)

This paper describes a methodology for simultaneous identification of fault parameters and mode switching events for hybrid systems. The method is developed based on the notion of Global Analytical Redundancy Relations (GARRs) from the bond graph model ... Keywords: Bond graph, Fault parameter, Global analytical redundancy relation, Hybrid system, Mode switching time stamps, Particle swarm optimization

Ming Yu; Ming Luo; Danwei Wang; Shai Arogeti; Xinzheng Zhang

2010-04-01T23:59:59.000Z

489

The mixed blessing of a deregulatory endpoint for the public switched telephone network  

Science Conference Proceedings (OSTI)

Receiving authority to dismantle the wireline public switched telephone network (PSTN) will deliver a mixture of financial benefits and costs to incumbent carriers and also jeopardize longstanding legislative and regulatory goals seeking ubiquitous, ... Keywords: Common carriage, Deregulation, Information service, Interconnection, Peering, Public switched telecommunications network, Telecommunications service, Universal service

Rob Frieden

2013-05-01T23:59:59.000Z

490

Simultaneous switching noise in on-chip CMOS power distribution networks  

Science Conference Proceedings (OSTI)

Simultaneous switching noise (SSN) has become an important issue in the design of the internal on-chip power distribution networks in current very large scale integration/ultra large scale integration (VLSI/ULSI) circuits. An inductive model is used ... Keywords: integrated circuit interconnection, on-chip inductance, power distribution network, simultaneous switching noise

Kevin T. Tang; Eby G. Friedman

2002-08-01T23:59:59.000Z

491

A Switched Capacitor Approach to Field-Programmable Analog Array (FPAA) Design  

Science Conference Proceedings (OSTI)

We present a voltage mode switched-capacitor Field Programmable Analog Array (FPAA) to be used to implement various analog circuits. The FPAA consists of uniform configurable analog blocks (CABs) allowing implementation of different functions. Each CAB ... Keywords: configurable analog block, field-programmable analog array, switched-capacitor

Haydar Kutuk; Sung-Mo (Steve) Kang

1998-09-01T23:59:59.000Z

492

Self-consistent theory of current-induced switching of magnetization D. M. Edwards,1  

E-Print Network (OSTI)

Kingdom 2Department of Mathematics, City University, London EC1V 0HB, United Kingdom 3Department T and T are comparable for a Co/Cu/Co 111 junction when the switching Co layer is one or two atomic planes thick. T is 27% of T even for a switching Co magnet of ten atomic planes. Depending on material parameters of the junction

Umerski, Andrey

493

Automatic Generation of Symbolic Reliability Functions for Processor-Memory-Switch Structures  

Science Conference Proceedings (OSTI)

Calculation of the reliability of computer system architectures with built-in redundancy, such as multiprocessors, is gaining in importance. The task of computing the reliability function for arbitrary Processor-Memory-Switch (PMS) interconnection structures, ... Keywords: symbolic hard-failure reliability functions, Automatic generation of symbolic reliability functions, processor-memory-switch (PMS) structures, reliability computation program

V. Kini; D. P. Siewiorek

1982-08-01T23:59:59.000Z

494

LOCALIZED SWITCHING RAMP-METERING CONTROL WITH QUEUE LENGTH ESTIMATION AND  

E-Print Network (OSTI)

LOCALIZED SWITCHING RAMP-METERING CONTROL WITH QUEUE LENGTH ESTIMATION AND REGULATION a localized ramp-metering strategy for freeways that achieves the goal of reducing the spatial and temporal of a switching mainline-traffic responsive ramp-metering controller that adapts to the different traffic dynamics

Horowitz, Roberto

495

A high-performance ATM switch based on modified shuffle-exchange network  

Science Conference Proceedings (OSTI)

This paper presents an output buffering ATM switch, called modified shuffle-exchange network (MSN) that is obtained by inserting a connection pattern just after every other shuffle-exchange stage. The purpose of modifying a shuffle-exchange network by ... Keywords: Destination tag routing scheme, Internal conflict, Output buffering ATM switch, Performance evaluation, Shuffle-exchange network

Hasan Cam

1999-01-01T23:59:59.000Z

496

Implications of a Regime-Switching Model on Natural Gas Storage Valuation and Optimal Operation  

E-Print Network (OSTI)

Implications of a Regime-Switching Model on Natural Gas Storage Valuation and Optimal Operation-switching model for the risk adjusted natural gas spot price and study the implications of the model on the valuation and optimal operation of natural gas storage facilities. We calibrate the model parameters to both

Forsyth, Peter A.

497

Switching algorithms for extending battery life in Electric Vehicles Ron Adany a,*, Doron Aurbach b  

E-Print Network (OSTI)

of automobiles. The propulsion solutions for EVs are based on hybrid or fully battery powered electric vehiclesSwitching algorithms for extending battery life in Electric Vehicles Ron Adany a,*, Doron Aurbach b 27 December 2012 Keywords: Electric Vehicles (EV) Switching algorithms Battery life Lithium ion

Kraus, Sarit

498

A Simple Heuristic for Assignment of Cells to Switches in a PCS Network  

Science Conference Proceedings (OSTI)

This work deals with a design problem for a network of Personal Communication Services (PCS). The goal is to assign cells to switches in a PCS Network (PCSN) in an optimum manner so as to minimize the total cost which includes two types of cost, ... Keywords: PCS, cell, clustering, handoff, heuristic, optimization, switch

Debashis Saha; Amitava Mukherjee; Partha Sarathi Bhattacharya

2000-03-01T23:59:59.000Z

499

A new architectural approach for optical burst switching networks based on a common control channel  

Science Conference Proceedings (OSTI)

The new architectural approach to Optical Burst Switching networks presented here features a common control channel and a node locally maintained network model. The Common Control Channel allows for a fast and efficient broadcast of the network Control ... Keywords: Optical burst switched networks, Optical network architecture

Nuno M. Garcia; Paulo P. Monteiro; MRio M. Freire; Jos R. Santos; Przemyslaw Lenkiewicz

2007-11-01T23:59:59.000Z

500

U-108: Net4Switch ipswcom ActiveX Control Buffer Overflow Vulnerability |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

8: Net4Switch ipswcom ActiveX Control Buffer Overflow 8: Net4Switch ipswcom ActiveX Control Buffer Overflow Vulnerability U-108: Net4Switch ipswcom ActiveX Control Buffer Overflow Vulnerability February 22, 2012 - 8:00am Addthis PROBLEM: A vulnerability was reported in Net4Switch ipswcom ActiveX Control, which can be exploited by malicious people to compromise a user's system. PLATFORM: Net4Switch ipswcom ActiveX Control 1.x ABSTRACT: The vulnerability is caused due to a boundary error within the "CxDbgPrint()" function (cxcmrt.dll) when creating a debug message string. reference LINKS: Vendor Advisory Secunia Advisroy 48125 No CVE references. IMPACT ASSESSMENT: High Discussion: The vulnerability is caused due to a boundary error within the "CxDbgPrint()" function (cxcmrt.dll) when creating a debug message string.