National Library of Energy BETA

Sample records for international standards organization

  1. International Quality Assurance Standards (Presentation)

    SciTech Connect (OSTI)

    Kurtz, S.; Hacke, P.; Wohlgemuth, J.; Kempe, M.; Yamamichi, M.

    2011-02-01

    Tests to make quantitative predictions about photovoltaic (PV) modules are needed. This presentation proposes the creation of international quality assurance standards for PV modules.

  2. Standardization of Transport Properties Measurements: Internal...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Standardization of Transport Properties Measurements: Internal Energy Agency (IEA-AMT) Annex on Thermoelectric International Round-Robin on Transport Properties of Bismuth ...

  3. National/International Standards | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    National/International Standards National/International Standards National/International Standards CNS and staff are recognized experts within their areas of technical responsibilities. An important aspect of this recognition is the contribution made by CNS staff to advance collaboration and the nuclear safety experience at the national and international level. These include: A Technical cooperation visit with the Associate Principal Deputy Assistant Secretary for Environmental Management to

  4. International energy: Research organizations, 1986--1990

    SciTech Connect (OSTI)

    Hendricks, P.; Jordan, S. )

    1991-03-01

    The International Energy: Research Organizations publication contains the standardized names of energy research organizations used in energy information databases. Involved in this cooperative task are (1) the technical staff of the USDOE Office of Scientific and Technical Information (OSTI) in cooperation with the member countries of the Energy Technology Data Exchange (ETDE) and (2) the International Nuclear Information System (INIS). This publication identifies current organizations doing research in all energy fields, standardizes the format for recording these organization names in bibliographic citations, assigns a numeric code to facilitate data entry, and identifies report number prefixes assigned by these organizations. These research organization names may be used in searching the databases Energy Science Technology'' on DIALOG and Energy'' on STN International. These organization names are also used in USDOE databases on the Integrated Technical Information System. Research organizations active in the past five years, as indicated by database records, were identified to form this publication. This directory includes approximately 34,000 organizations that reported energy-related literature from 1986 to 1990 and updates the DOE Energy Data Base: Corporate Author Entries.

  5. Office of International Affairs Organization Chart | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Office of International Affairs Organization Chart Office of International Affairs Organization Chart PDF icon IA Org Chart Updated June 2014 More Documents & Publications PI ...

  6. Standards Development Organizations | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Standards Development Organizations Standards Development Organizations Many standards development organizations (SDOs) are working to develop codes and standards needed to prepare for the commercialization of alternative fuel vehicle technologies. The following graphic templates show the SDOs responsible for leading the support and development of key codes and standards for hydrogen-related technologies. National Template: Stationary & Portable Fuel Cell Systems National Template: Hydrogen

  7. Subpart C-Standards for Internal

    National Nuclear Security Administration (NNSA)

    skills of the individuals exposed to those hazards. 63 FR 59682, Nov. 4, 1998 Subpart C-Standards for Internal and External Exposure 835.201 Reserved 835.202...

  8. Travel to France as Chief US Delegate at a meeting of International Standards Organization ISO/TC-85, ``Nuclear Technology``. Foreign trip report, March 17--March 26, 1994

    SciTech Connect (OSTI)

    Westfall, R.M.

    1994-04-11

    As overall US Advisor for ISO/TC-85, SC-5, Dr. Westfall met with (1) Work Group 1, ``Measurement Techniques for the Chemical and Physical Characterization of UF{sub 6}, UO{sub 2}, and Mixed Oxide,`` on Monday, March 21, (2) Work Group 5, ``Standardization of Measurement Methods for the Characterization of Solid and Solidified Waste Forms, and for the Corrosion of their Primary Containers,`` on Tuesday, March 22; and (3) the full Subcommittee-5 on Wednesday, March 23. The status of work by all seven work groups in SC-5 was reported. Those having to do with nuclear fuel transportation (WG-4: UF, Containers, WG-9: Cask Trunnions, and WG-10: Cask Confinement) either have approved standards or drafts at an advanced stage of development. These work group convenors were asked to maintain their membership and establish new work areas in the field of nuclear fuel packaging. Definition of scope for new work is to be done in coordination with the interested staff members of the International Atomic Energy Agency, Vienna, Austria. On Thursday, March 24, the Cogema-Marcoule Plant staff hosted the SC-5 members to technical tours of their nuclear fuel reprocessing and waste vitrification and storage facilities.

  9. Savannah River Analytical Laboratories Achieve International Standard

    National Nuclear Security Administration (NNSA)

    Accreditation | National Nuclear Security Administration | (NNSA) Savannah River Analytical Laboratories Achieve International Standard Accreditation Tuesday, September 8, 2015 - 12:55pm Savannah River National Laboratory's F/H Analytical Laboratories have achieved ISO/IEC 17025 accreditation, which represents an independent validation of two analytical methods against a set of world-class specifications. The accreditation was formally awarded by the American Association for Laboratory

  10. Office of Policy and International Affairs Organization Chart...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Office of Policy and International Affairs Organization Chart Office of Policy and International Affairs Organization Chart Office of Policy and International Affairs Organization...

  11. International Labor Organization (ILO) | Open Energy Information

    Open Energy Info (EERE)

    Switzerland Year Founded: 1919 References: http:www.ilo.orggloballang--enindex.htma1 Overview "The ILO is the international organization responsible for drawing up and...

  12. International energy: Research organizations, 1988--1992. Revision 1

    SciTech Connect (OSTI)

    Hendricks, P.; Jordan, S.

    1993-06-01

    This publication contains the standardized names of energy research organizations used in energy information databases. Involved in this cooperative task are (1) the technical staff of the US DOE Office of Scientific and Technical Information (OSTI) in cooperation with the member countries of the Energy Technology Data Exchange (ETDE) and (2) the International Nuclear Information System (INIS). ETDE member countries are also members of the International Nuclear Information System (INIS). Nuclear organization names recorded for INIS by these ETDE member countries are also included in the ETDE Energy Database. Therefore, these organization names are cooperatively standardized for use in both information systems. This publication identifies current organizations doing research in all energy fields, standardizes the format for recording these organization names in bibliographic citations, assigns a numeric code to facilitate data entry, and identifies report number prefixes assigned by these organizations. These research organization names may be used in searching the databases ``Energy Science & Technology`` on DIALOG and ``Energy`` on STN International. These organization names are also used in USDOE databases on the Integrated Technical Information System. Research organizations active in the past five years, as indicated by database records, were identified to form this publication. This directory includes approximately 31,000 organizations that reported energy-related literature from 1988 to 1992 and updates the DOE Energy Data Base: Corporate Author Entries.

  13. International Standards & Policy Development | National Nuclear...

    National Nuclear Security Administration (NNSA)

    and Nuclear Facilities off site link to better reflect the threat environment. NNSA also led the international effort to revise the International Atomic Energy Agency's off site...

  14. Standardization of Transport Properties Measurements: Internal Energy

    Broader source: Energy.gov (indexed) [DOE]

    STD-5507-2013 February 2013 DOE STANDARD Standard for Communicating Waste Characterization and DOT Hazard Classification Requirements for Low Specific Activity Materials and Surface Contaminated Objects [This Standard describes acceptable, but not mandatory means for complying with requirements. Standards are not requirements documents and are not to be construed as requirements in any audit or appraisal for compliance with associated rule or directives.] U.S. Department of Energy SAFT

  15. Two Key NNSA Site Offices Registerd Under International Quality Standard |

    National Nuclear Security Administration (NNSA)

    National Nuclear Security Administration | (NNSA) Two Key NNSA Site Offices Registerd Under International Quality Standard June 24, 2005 PDF icon NR06-05.pdf

  16. Improved Nuclear Safety Through International Standards

    SciTech Connect (OSTI)

    Doctor, Steven R.; Moffitt, Robert L.; Taylor, Theodore T.; Trosman, Grigory

    1999-12-01

    This paper describes the 1986 Chornobyl accident, notes some of its effects, and reviews the cause. International efforts to improve reactor safety to prevent another such accident are listed. The U.S. Department of Energy (DOE) program to improve the safety of Soviet-designed nuclear power plants is outlined, followed by a more detailed description of the specific projects related to nondestructive evaluation. Future directions are proposed, and conclusions are provided.

  17. ISO 50001 Energy Management Standard

    SciTech Connect (OSTI)

    2013-08-12

    This powerful standard from the International Organization for Standardization (ISO) provides an internationally recognized framework for organizations to voluntarily implement an energy management system.

  18. Finite element analyses for seismic shear wall international standard problem

    SciTech Connect (OSTI)

    Park, Y.J.; Hofmayer, C.H.

    1998-04-01

    Two identical reinforced concrete (RC) shear walls, which consist of web, flanges and massive top and bottom slabs, were tested up to ultimate failure under earthquake motions at the Nuclear Power Engineering Corporation`s (NUPEC) Tadotsu Engineering Laboratory, Japan. NUPEC provided the dynamic test results to the OECD (Organization for Economic Cooperation and Development), Nuclear Energy Agency (NEA) for use as an International Standard Problem (ISP). The shear walls were intended to be part of a typical reactor building. One of the major objectives of the Seismic Shear Wall ISP (SSWISP) was to evaluate various seismic analysis methods for concrete structures used for design and seismic margin assessment. It also offered a unique opportunity to assess the state-of-the-art in nonlinear dynamic analysis of reinforced concrete shear wall structures under severe earthquake loadings. As a participant of the SSWISP workshops, Brookhaven National Laboratory (BNL) performed finite element analyses under the sponsorship of the U.S. Nuclear Regulatory Commission (USNRC). Three types of analysis were performed, i.e., monotonic static (push-over), cyclic static and dynamic analyses. Additional monotonic static analyses were performed by two consultants, F. Vecchio of the University of Toronto (UT) and F. Filippou of the University of California at Berkeley (UCB). The analysis results by BNL and the consultants were presented during the second workshop in Yokohama, Japan in 1996. A total of 55 analyses were presented during the workshop by 30 participants from 11 different countries. The major findings on the presented analysis methods, as well as engineering insights regarding the applicability and reliability of the FEM codes are described in detail in this report. 16 refs., 60 figs., 16 tabs.

  19. DOE-TSPP-3-2013, Using Voluntary Consensus Standards and Interacting With Standards Development Organizations

    Broader source: Energy.gov [DOE]

    This procedure identifies the process by which the Department of Energy (DOE) adopts Voluntary Consensus Standards (VCSs) and provides guidance for the interaction of DOE and contractor employees with Standards Development Organizations (SDOs).

  20. International Experience in Standards and Labeling Programs for Rice Cookers

    SciTech Connect (OSTI)

    Zhou, Nan; Zheng, Nina

    2008-05-01

    China has had an active program on energy efficiency standards for household appliances since the mid-1990s. Rice cooker is among the first to be subject to such mandatory regulation, since it is one of the most prevalent electric appliances in Chinese households. Since first introduced in 1989, the minimum energy efficiency standard for rice cookers has not been revised. Therefore, the potential for energy saving is considerable. Initial analysis from CNIS indicates that potential carbon savings is likely to reach 7.6 million tons of CO2 by the 10th year of the standard implementation. Since September 2007, CNIS has been working with various groups to develop the new standard for rice cookers. With The Energy Foundation's support, LBNL has assisted CNIS in the revision of the minimum energy efficiency standard for rice cookers that is expected to be effective in 2009. Specifically, work has been in the following areas: assistance in developing consumer survey on usage pattern of rice cookers, review of international standards, review of international test procedures, comparison of the international standards and test procedures, and assessment of technical options of reducing energy use. This report particularly summarizes the findings of reviewing international standards and technical options of reducing energy consumption. The report consists of an overview of rice cooker standards and labeling programs and testing procedures in Hong Kong, South Korea, Japan and Thailand, and Japan's case study in developing energy efficiency rice cooker technologies and rice cooker efficiency programs. The results from the analysis can be summarized as the follows: Hong Kong has a Voluntary Energy Efficiency Labeling scheme for electric rice cookers initiated in 2001, with revision implemented in 2007; South Korea has both MEPS and Mandatory Energy Efficiency Label targeting the same category of rice cookers as Hong Kong; Thailand's voluntary endorsement labeling program is

  1. OASIS Organization for the Advancement of Structured Information Standards

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Organization for the Advancement of Structured Information Standards http://www.oasis-open.org/ William Cox, Cox Software Architects LLC Toby Considine, TC9 Inc Light, loose integration for inter- domain communications We use composite protocols and security when we want them to scale. IP TCP ASCII / Unicode URIs TELNET SMTP IMAP / POP3 HTML Eb-whatever FieML FumML WS-The-Other ODBC / JDBC ... So are yours ... Your VPN Legacy data structure WS-That WS-This FeeML FoeML Your latest thing

  2. Status of the International Neutron Cross-Section Standards File

    SciTech Connect (OSTI)

    Pronyaev, Vladimir G.; Badikov, Sergei A.; Gai, Evgeny V.; Chen Zhenpeng; Carlson, Allan D.; Hale, Gerald M.; Hambsch, Franz-Josef; Hofmann, Hartmut M.; Larson, Nancy M.; Smith, Donald L.; Oh, Soo-Youl; Tagesen, Siegfried; Vonach, Herbert

    2005-05-24

    A report is given of the progress achieved in an IAEA Co-ordinated Research Project (CRP) to improve the cross-section standards. The objectives of the CRP, started in 2002, were initially the understanding of the origin of the strong uncertainty reduction in R-matrix model fits and the improvement of the evaluation methodology. These aims were extended in 2003 to the preparation of new evaluations for the standard 6Li(n,t), 10B(n,{alpha}), 10B(n,{alpha}1), 197Au(n,{gamma}), 235U(n,f), and 238U(n,f) reactions. The methodology, codes, and experimental database developed by Poenitz and Hale for the ENDF/B-VI standards evaluation were taken as the basis for the new evaluation. The major results achieved by the CRP participants include the testing and intercomparison of a number of codes that can be used in the standards evaluation, updating the database of experimental results, analysis of the reasons leading to the strong uncertainty reduction in model fits, and a study of the bias in evaluated data caused by the Peelles's Pertinent Puzzle (PPP) effect, which has been widely discussed in the nuclear data community since the ENDF/B-VI standards evaluation was completed. Preliminary results of the new standards evaluation are shown. The use of the new 235U(n,f) cross section leads to better consistency in calculations of some important integral experiments.

  3. DOE-TSPP-3, Use of Voluntary Consensus Standards and Interaction with Standards Development Organizations- August 1, 2000

    Broader source: Energy.gov [DOE]

    This procedure identifies the process by which DOE adopts Voluntary Consensus Standards (VCSs) and provides guidance for the interaction of DOE and contractor employees with Standards Development Organizations (SDOs).

  4. International standardization in the petroleum industry status from the subsea sector

    SciTech Connect (OSTI)

    Inderberg, O.

    1995-12-01

    The use of standards in subsea production systems and how the standards should be developed has been a debate for some time in the industry. The initial standardization work springs from the work performed in the API 17 series of recommended practices and specifications. The development within this sector of the industry is still happening rapidly since it is a relative new area. The standardization effort is happening both on national, regional and international levels. This paper will give status of the international standardization ISO work ongoing in the subsea area and give some background for the work. The importance of the work to the industry will be highlighted.

  5. International Standards Development for Marine and Hydrokinetic Renewable Energy - Final Report on Technical Status

    SciTech Connect (OSTI)

    Rondorf, Neil E.; Busch, Jason; Kimball, Richard

    2011-10-29

    This report summarizes the progress toward development of International Standards for Marine and Hydrokinetic Renewable Energy, as funded by the U.S. Department of Energy (DOE) under the International Electrotechnical Commission (IEC) Technical Committee 114. The project has three main objectives: 1. Provide funding to support participation of key U.S. industry technical experts in 6 (originally 4) international working groups and/or project teams (the primary standards-making committees) and to attend technical meetings to ensure greater U.S. involvement in the development of these standards. 2. Provide a report to DOE and industry stakeholders summarizing the IEC standards development process for marine and hydrokinetic renewable energy, new international standards and their justifications, and provide standards guidance to industry members. 3. Provide a semi-annual (web-based) newsletter to the marine renewable energy community. The newsletter will educate industry members and stakeholders about the processes, progress, and needs of the US efforts to support the international standards development effort. The newsletter is available at www.TC114.us

  6. Monitoring internal organ motion with continuous wave radar in CT

    SciTech Connect (OSTI)

    Pfanner, Florian; Maier, Joscha; Allmendinger, Thomas; Flohr, Thomas; Kachelrieß, Marc

    2013-09-15

    Purpose: To avoid motion artifacts in medical imaging or to minimize the exposure of healthy tissues in radiation therapy, medical devices are often synchronized with the patient's respiratory motion. Today's respiratory motion monitors require additional effort to prepare the patients, e.g., mounting a motion belt or placing an optical reflector on the patient's breast. Furthermore, they are not able to measure internal organ motion without implanting markers. An interesting alternative to assess the patient's organ motion is continuous wave radar. The aim of this work is to design, implement, and evaluate such a radar system focusing on application in CT.Methods: The authors designed a radar system operating in the 860 MHz band to monitor the patient motion. In the intended application of the radar system, the antennas are located close to the patient's body inside the table of a CT system. One receive and four transmitting antennas are used to avoid the requirement of exact patient positioning. The radar waves propagate into the patient's body and are reflected at tissue boundaries, for example at the borderline between muscle and adipose tissue, or at the boundaries of organs. At present, the authors focus on the detection of respiratory motion. The radar system consists of the hardware mentioned above as well as of dedicated signal processing software to extract the desired information from the radar signal. The system was evaluated using simulations and measurements. To simulate the radar system, a simulation model based on radar and wave field equations was designed and 4D respiratory-gated CT data sets were used as input. The simulated radar signals and the measured data were processed in the same way. The radar system hardware and the signal processing algorithms were tested with data from ten volunteers. As a reference, the respiratory motion signal was recorded using a breast belt simultaneously with the radar measurements.Results: Concerning the

  7. Technical Study Addresses a Key Challenge to Harmonizing U.S. and International PV Module Standards (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2012-07-01

    NREL builds community and industry support by addressing concerns voiced by key standards organizations. Photovoltaic (PV) manufacturers in the United States test the safety of their products using standards developed through consensus processes. Because U.S. PV module safety standards are not aligned with international standards, manufacturers must test their modules twice - and sometimes maintain separate product lines. By meeting with standards organizations such as the Solar ABCs and Underwriters Laboratories (UL), National Renewable Energy Laboratory (NREL) leaders have worked to identify different stakeholders priorities and concerns. UL, specifically, has expressed concern that the international standards do not address all possible risks. For example, new encapsulant materials could soften at high temperatures and frameless modules could slide apart, exposing live electrical parts or allowing glass to fall on a person below. The deformation of a solid material under the influence of mechanical stresses is known as 'creep.' Current module qualification tests are limited to 85 C, whereas modules can, for short times, reach 105 C outdoors. In response to UL's concern, NREL designed and executed an experiment to compare on-sun and accelerated rates of creep for modules fabricated with various encapsulants, including some that have low melting points. Objectives were to (1) evaluate the potential for creep in outdoor exposure, (2) provide guidance on the risks and design needs with thermoplastic materials, and (3) provide a basis for modifying standards to account for materials with potential to creep. The study tested experimental materials with eight representative encapsulants in both outdoor and indoor (chamber) exposure. The study found that modules with materials that were expected to creep did so in the indoor exposure, but not in most outdoor environments and mounting configurations. The results provide a basis for defining an accelerated test needed to

  8. ISO launches a project committee to develop an International Standard for

    Broader source: Energy.gov (indexed) [DOE]

    energy management | Department of Energy American National Standards Institute (ANSI) approved the formation of a U.S. Technical Advisory Group (US TAG) to the ISO Project Committee 242. The TAG is a mechanism for identifying issues and developing national consensus regarding energy management. Read this announcement for more details about the group's charge and how to participate. ISO launches a project committee to develop an International Standard for energy management (April 2008)

  9. Open Issues in the Development of Safety Standards for Compressed Hydrogen Storage at SAE-International

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Open Issues in the Development of Safety Standards for Compressed Hydrogen Storage at SAE-International 29 April 2010 DOE Tank Workshop DOE Tank Workshop Sandia National Laboratory Livermore, CA Chris Sloane Sloane Solutions * feedback vehicle operation & ee ac o nex Development of Fuel Cell Vehicles Number of Vehicles Challenge Public Standards & Regulations Government Role Prototype Vehicle Demonstration Vehicle Low Volume Production Vehicle High Volume Production Vehicle < 10s

  10. International Review of the Development and Implementation of Energy Efficiency Standards and Labeling Programs

    SciTech Connect (OSTI)

    Zhou, Nan; Zheng, Nina; Fridley, David

    2012-02-28

    Appliance energy efficiency standards and labeling (S&L) programs have been important policy tools for regulating the efficiency of energy-using products for over 40 years and continue to expand in terms of geographic and product coverage. The most common S&L programs include mandatory minimum energy performance standards (MEPS) that seek to push the market for efficient products, and energy information and endorsement labels that seek to pull the market. This study seeks to review and compare some of the earliest and most well-developed S&L programs in three countries and one region: the U.S. MEPS and ENERGY STAR, Australia MEPS and Energy Label, European Union MEPS and Ecodesign requirements and Energy Label and Japanese Top Runner programs. For each program, key elements of S&L programs are evaluated and comparative analyses across the programs undertaken to identify best practice examples of individual elements as well as cross-cutting factors for success and lessons learned in international S&L program development and implementation. The international review and comparative analysis identified several overarching themes and highlighted some common factors behind successful program elements. First, standard-setting and programmatic implementation can benefit significantly from a legal framework that stipulates a specific timeline or schedule for standard-setting and revision, product coverage and legal sanctions for non-compliance. Second, the different MEPS programs revealed similarities in targeting efficiency gains that are technically feasible and economically justified as the principle for choosing a standard level, in many cases at a level that no product on the current market could reach. Third, detailed survey data such as the U.S. Residential Energy Consumption Survey (RECS) and rigorous analyses provide a strong foundation for standard-setting while incorporating the participation of different groups of stakeholders further strengthen the process

  11. Dose Calculation Evolution for Internal Organ Irradiation in Humans

    SciTech Connect (OSTI)

    Jimenez V, Reina A.

    2007-10-26

    The International Commission of Radiation Units (ICRU) has established through the years, a discrimination system regarding the security levels on the prescription and administration of doses in radiation treatments (Radiotherapy, Brach therapy, Nuclear Medicine). The first level is concerned with the prescription and posterior assurance of dose administration to a point of interest (POI), commonly located at the geometrical center of the region to be treated. In this, the effects of radiation around that POI, is not a priority. The second level refers to the dose specifications in a particular plane inside the patient, mostly the middle plane of the lesion. The dose is calculated to all the structures in that plane regardless if they are tumor or healthy tissue. In this case, the dose is not represented by a point value, but by level curves called 'isodoses' as in a topographic map, so you can assure the level of doses to this particular plane, but it also leave with no information about how this values go thru adjacent planes. This is why the third level is referred to the volumetrical description of doses so these isodoses construct now a volume (named 'cloud') that give us better assurance about tissue irradiation around the volume of the lesion and its margin (sub clinical spread or microscopic illness). This work shows how this evolution has resulted, not only in healthy tissue protection improvement but in a rise of tumor control, quality of life, better treatment tolerance and minimum permanent secuelae.

  12. Paired organs--Should they be treated jointly or separately in internal dosimetry?

    SciTech Connect (OSTI)

    Parach, Ali-Asghar; Rajabi, Hossein; Askari, Mohammad-Ali

    2011-10-15

    Purpose: Size, shape, and the position of paired organs are different in abdomen. However, the counterpart organs are conventionally treated jointly together in internal dosimetry. This study was performed to quantify the difference of specific absorbed fraction of organs in considering paired organs jointly like single organs or as two separate organs. Methods: Zubal phantom and GATE Monte Carlo package were used to calculate the SAF for the self-absorption and cross-irradiation of the lungs, kidneys, adrenal glands (paired organs), liver, spleen, stomach, and pancreas (single organs). The activity was assumed uniformly distributed in the organs, and simulation was performed for monoenergetic photons of 10, 50, 100, 500, 1000 keV and mono-energetic electrons of 350, 500, 690, 935, 1200 keV. Results: The results demonstrated that self-absorption of left and right counterpart organs may be different depending upon the differences in their masses. The cross-irradiations between left-to-right and right-to-left counterpart organs are always equal irrespective of difference in their masses. Cross-irradiation from the left and right counterpart organs to other organs are different (4-24 times in Zubal phantom) depending on the photon energy and organs. The irradiation from a single source organ to the left and right counterpart paired organs is always different irrespective of activity concentration. Conclusions: Left and right counterpart organs always receive different absorbed doses from target organs and deliver different absorbed doses to target organs. Therefore, in application of radiopharmaceuticals in which the dose to the organs plays a role, counterpart organs should be treated separately as two separate organs.

  13. DNA damage in internal organs after cutaneous exposure to sulphur mustard

    SciTech Connect (OSTI)

    Batal, Mohamed; Boudry, Isabelle; Mouret, Stéphane; Cléry-Barraud, Cécile; Wartelle, Julien; Bérard, Izabel

    2014-07-01

    Sulphur mustard (SM) is a chemical warfare agent that attacks mainly skin, eye and lungs. Due to its lipophilic properties, SM is also able to diffuse through the skin and reach internal organs. DNA represents one of the most critical molecular targets of this powerful alkylating agent which modifies DNA structure by forming monoadducts and biadducts. These DNA lesions are involved in the acute toxicity of SM as well as its long-term carcinogenicity. In the present work we studied the formation and persistence of guanine and adenine monoadducts and guanine biadducts in the DNA of brain, lungs, kidneys, spleen, and liver of SKH-1 mice cutaneously exposed to 2, 6 and 60 mg/kg of SM. SM-DNA adducts were detected in all studied organs, except in liver at the two lowest doses. Brain and lungs were the organs with the highest level of SM-DNA adducts, followed by kidney, spleen and liver. Monitoring the level of adducts for three weeks after cutaneous exposure showed that the lifetime of adducts were not the same in all organs, lungs being the organ with the longest persistence. Diffusion from skin to internal organs was much more efficient at the highest compared to the lowest dose investigated as the result of the loss of the skin barrier function. These data provide novel information on the distribution of SM in tissues following cutaneous exposures and indicate that brain is an important target. - Highlights: • Sulphur mustard reaches internal organs after skin exposure • Adducts are detected in the DNA of internal organs • Brain is the organ with the highest level of DNA damage • The barrier function of skin is lost at high dose of sulphur mustard • DNA adducts persist in organs for 2 or 3 weeks.

  14. An International Survey of Electric Storage Tank Water Heater Efficiency and Standards

    SciTech Connect (OSTI)

    Johnson, Alissa; Lutz, James; McNeil, Michael A.; Covary, Theo

    2013-11-13

    Water heating is a main consumer of energy in households, especially in temperate and cold climates. In South Africa, where hot water is typically provided by electric resistance storage tank water heaters (geysers), water heating energy consumption exceeds cooking, refrigeration, and lighting to be the most consumptive single electric appliance in the home. A recent analysis for the Department of Trade and Industry (DTI) performed by the authors estimated that standing losses from electric geysers contributed over 1,000 kWh to the annual electricity bill for South African households that used them. In order to reduce this burden, the South African government is currently pursuing a programme of Energy Efficiency Standards and Labelling (EES&L) for electric appliances, including geysers. In addition, Eskom has a history of promoting heat pump water heaters (HPWH) through incentive programs, which can further reduce energy consumption. This paper provides a survey of international electric storage water heater test procedures and efficiency metrics which can serve as a reference for comparison with proposed geyser standards and ratings in South Africa. Additionally it provides a sample of efficiency technologies employed to improve the efficiency of electric storage water heaters, and outlines programs to promote adoption of improved efficiency. Finally, it surveys current programs used to promote HPWH and considers the potential for this technology to address peak demand more effectively than reduction of standby losses alone

  15. Acting Globally: Potential Carbon Emissions Mitigation Impacts from an International Standards and Labelling Program

    SciTech Connect (OSTI)

    McNeil, Michael A; Letschert, Virginie E.; de la Rue du Can, Stephane; Egan, Christine

    2009-05-29

    This paper presents an analysis of the potential impacts of an international initiative designed to support and promote the development and implementation of appliances standards and labelling programs throughout the world. As part of previous research efforts, LBNL developed the Bottom Up Energy Analysis System (BUENAS), an analysis framework that estimates impact potentials of energy efficiency policies on a global scale. In this paper, we apply this framework to an initiative that would result in the successful implementation of programs focused on high priority regions and product types, thus evaluating the potential impacts of such an initiative in terms of electricity savings and carbon mitigation in 2030. In order to model the likely parameters of such a program, we limit impacts to a five year period starting in 2009, but assume that the first 5 years of a program will result in implementation of 'best practice' minimum efficiency performance standards by 2014. The 'high priority' regions considered are: Brazil, China, the European Union,India, Mexico and the United States. The products considered are: refrigerators, air conditioners, lighting (both fluorescent and incandescent), standby power (for consumer electronics) and televisions in the residential sector, and air conditioning and lighting in commercial buildings. In 2020, these regions and enduses account for about 37percent of global residential electricity and 29percent of electricity in commercial buildings. We find that 850Mt of CO2 could be saved in buildings by 2030 compared to the baseline forecast.

  16. The role of the international professional organization in the growth and development of environmental impact assessment

    SciTech Connect (OSTI)

    Voland, M.E. ); Page, J.M. )

    1993-01-01

    Environmental impact assessment is an international phenomenon. A concept begun by the National Environmental Policy Act (NEPA) of 1969 in the US is becoming an important component of development planning throughout the world. In the summer of 1992, professionals from 44 countries attended the annual meeting of the International Association for Impact Assessment (IAIA). The impact studies can go beyond the project focus of the US to encompass regional and country planning. Through active involvement in the meetings of the international professional organization, the environmental professional has the opportunity to hear formal presentations by those who have differing experiences based upon what is possible within their political and cultural systems. Further, informal interaction at these meetings provides the opportunity to share information, and learn from one another. This presentation will address the role of the professional organization in supporting environmental impact assessment internationally, particularly in developing nations; ways the professional organization can fulfill that role; and how a particular organization, the International Association for Impact Assessment, addresses these challenges.

  17. IEEE standards worldwide

    SciTech Connect (OSTI)

    Hammons, T.J. )

    1995-01-01

    This article presents North American views on the development and use of internationally acceptable standards through strengthened ties with global standards organizations. The key ingredient to enhance the international reputation of IEEE standards is, without doubt, greater participation of members around the world. Standards that will really have force are those that are recognized as preeminent and that are sought after by organizations worldwide. it will be necessary to develop enhanced liaisons with standards organizations around the world, such as the IEC. These are some of the issues that will be addressed by panelists representing standards organizations and users from North America, United States, Canada, and Mexico. Also discussed is the importance of standards in the NAFTA and GATT agreements on trade.

  18. Codes and Standards | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Basics » Codes and Standards Codes and Standards Currently, thirteen U.S. and two international standards development organizations (SDOs) are developing and publishing the majority of the voluntary domestic codes and standards. These organizations typically work with the public and private sectors to craft standards. In the U.S., the American National Standards Institute (ANSI) coordinates standards development, provides guidance on consensus building, recommends that no more than one standard

  19. Field Test Protocol. Standard Internal Load Generation for Unoccupied Test Homes

    SciTech Connect (OSTI)

    Fang, X.; Christensen, D.; Barker, G.; Hancock, E.

    2011-06-01

    This document describes a simple and general way to generate House Simulation Protocol (HSP)-consistent internal sensible and latent loads in unoccupied homes. It is newly updated based on recent experience, and provides instructions on how to calculate and set up the operational profiles in unoccupied homes. The document is split into two sections: how to calculate the internal load magnitude and schedule, and then what tools and methods should be used to generate those internal loads to achieve research goals.

  20. Field Test Protocol: Standard Internal Load Generation in Unoccupied Test Homes

    SciTech Connect (OSTI)

    Fang, X.; Christensen, D.; Barker, G.; Hancock, E.

    2011-06-01

    This document describes a simple and general way to generate House Simulation Protocol (HSP)-consistent internal sensible and latent loads in unoccupied homes. It is newly updated based on recent experience, and provides instructions on how to calculate and set up the operational profiles in unoccupied homes. The document is split into two sections: how to calculate the internal load magnitude and schedule, and then what tools and methods should be used to generate those internal loads to achieve research goals.

  1. Standardization of Transport Properties Measurements: Internal Energy Agency (IEA-AMT) Annex on Thermoelectric

    Office of Energy Efficiency and Renewable Energy (EERE)

    Thermoelectric materials transport properties measurements improvement and standardization is undertaken by new IEA annex under the Advanced Materials for Transportation implementing agreement

  2. Certification of a Standard Reference Material for organics in crude oil

    SciTech Connect (OSTI)

    Not Available

    1983-06-20

    The objective of this program was to provide a complex matrix Standard Reference Material (SRM) certified for the concentrations of selected toxic organic compounds. This SRM will be useful in the chemical characterization and quality assurance efforts and methods development research of laboratories involved in the organic compound characterization of fuels. A petroleum crude oil (Wilmington crude) was selected as the matrix to be used in this effort. This material, when certified, will serve as a companion to SRM 1580, Organics in Shale Oil, that was certified in 1980 with Department of Energy support. The use of both SRM's will provide researchers with two points of calibration for analyses of compounds that are certified in both materials. In general, the certification of SRM's is accomplished through utilization of at least two totally independent techniques of analysis. In order for a parameter to be certified, the results of analyses by these independent methods must agree. The degree of agreement is specified as the uncertainty on the Certificate of Analysis. We have determined the concentrations of dibenzothiophene, phenol, o-cresol, and six polycyclic aromatic hydrocarbons by two independent analytical procedures each. Carbazole and benzo(e)pyrene were determined by electron impact gas chromatography/mass spectrometry (GC/MS) only. A summary of all results to date appears in the table appended to this report.

  3. Coal quality control in the context of international standards ISO 9000-2000

    SciTech Connect (OSTI)

    Freidina, E.V.; Botvinnik, A.A.; Dvornikova, A.N.

    2008-11-15

    The paper sets forth scientific foundations and organizational-technical environment offered by ISO 9000 standards that are oriented to product quality management and, thus, product quality planning. The authors describe the results of coal product quality planning with using the QFD methodology, present a model of coal quality control through the coal product life cycle and mining technologies. It is proposed to evaluate the quality management efficiency by the coefficient of concordance between the product quality and consumer's demands.

  4. Controlling Internal Organization of Multilayer Poly(methacrylic acid) Hydrogels with Polymer Molecular Weight

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Kozlovskaya, Veronika; Zavgorodnya, Oleksandra; Ankner, John F.; Kharlampieva, Eugenia

    2015-11-16

    Here, we report on tailoring the internal architecture of multilayer-derived poly(methacrylic acid) (PMAA) hydrogels by controlling the molecular weight of poly(N-vinylpyrrolidone) (PVPON) in hydrogen-bonded (PMAA/PVPON) layer-by-layer precursor films. The hydrogels are produced by cross-linking PMAA in the spin-assisted multilayers followed by PVPON release. We found that the thickness, morphology, and architecture of hydrogen-bonded films and the corresponding hydrogels are significantly affected by PVPON chain length. For all systems, an increase in PVPON molecular weight from Mw = 2.5 to 1300 kDa resulted in increased total film thickness. We also show that increasing polymer Mw smooths the hydrogen-bonded film surfaces butmore » roughens those of the hydrogels. Using deuterated dPMAA marker layers in neutron reflectometry measurements, we found that hydrogen-bonded films reveal a high degree of stratification which is preserved in the cross-linked films. We observed dPMAA to be distributed more widely in the hydrogen-bonded films prepared with small Mw PVPON due to the greater mobility of short-chain PVPON. Furthermore, these variations in the distribution of PMAA are erased after cross-linking, resulting in a distribution of dPMAA over about two bilayers for all Mw but being somewhat more widely distributed in the films templated with higher Mw PVPON. Finally, our results yield new insights into controlling the organization of nanostructured polymer networks using polymer molecular weight and open opportunities for fabrication of thin films with well-organized architecture and controllable function.« less

  5. Comparison of Test Procedures and Energy Efficiency Criteria in Selected International Standards & Labeling Programs for Copy Machines, External Power Supplies, LED Displays, Residential Gas Cooktops and Televisions

    SciTech Connect (OSTI)

    Zheng, Nina; Zhou, Nan; Fridley, David

    2012-03-01

    This report presents a technical review of international minimum energy performance standards (MEPS), voluntary and mandatory energy efficiency labels and test procedures for five products being considered for new or revised MEPS in China: copy machines, external power supply, LED displays, residential gas cooktops and flat-screen televisions. For each product, an overview of the scope of existing international standards and labeling programs, energy values and energy performance metrics and description and detailed summary table of criteria and procedures in major test standards are presented.

  6. (Terminology standardization)

    SciTech Connect (OSTI)

    Strehlow, R.A.

    1990-10-19

    Terminological requirements in information management was but one of the principal themes of the 2nd Congress on Terminology and Knowledge Engineering. The traveler represented the American Society for Testing and Materials' Committee on Terminology, of which he is the Chair. The traveler's invited workshop emphasized terminology standardization requirements in databases of material properties as well as practical terminology standardizing methods. The congress included six workshops in addition to approximately 82 lectures and papers from terminologists, artificial intelligence practitioners, and subject specialists from 18 countries. There were approximately 292 registrants from 33 countries who participated in the congress. The congress topics were broad. Examples were the increasing use of International Standards Organization (ISO) Standards in legislated systems such as the USSR Automated Data Bank of Standardized Terminology, the enhanced Physics Training Program based on terminology standardization in Physics in the Chinese province of Inner Mongolia, and the technical concept dictionary being developed at the Japan Electronic Dictionary Research Institute, which is considered to be the key to advanced artificial intelligence applications. The more usual roles of terminology work in the areas of machine translation. indexing protocols, knowledge theory, and data transfer in several subject specialties were also addressed, along with numerous special language terminology areas.

  7. Comparison of Test Procedures and Energy Efficiency Criteria in Selected International Standards and Labeling Programs for Clothes Washers, Water Dispensers, Vending Machines and CFLs

    SciTech Connect (OSTI)

    Fridley, David; Zheng, Nina; Zhou, Nan

    2010-06-01

    Since the late 1970s, energy labeling programs and mandatory energy performance standards have been used in many different countries to improve the efficiency levels of major residential and commercial equipment. As more countries and regions launch programs covering a greater range of products that are traded worldwide, greater attention has been given to harmonizing the specific efficiency criteria in these programs and the test methods for measurements. For example, an international compact fluorescent light (CFL) harmonization initiative was launched in 2006 to focus on collaboration between Australia, China, Europe and North America. Given the long history of standards and labeling programs, most major energy-consuming residential appliances and commercial equipment are already covered under minimum energy performance standards (MEPS) and/or energy labels. For these products, such as clothes washers and CFLs, harmonization may still be possible when national MEPS or labeling thresholds are revised. Greater opportunity for harmonization exists in newer energy-consuming products that are not commonly regulated but are under consideration for new standards and labeling programs. This may include commercial products such as water dispensers and vending machines, which are only covered by MEPS or energy labels in a few countries or regions. As China continues to expand its appliance standards and labeling programs and revise existing standards and labels, it is important to learn from recent international experiences with efficiency criteria and test procedures for the same products. Specifically, various types of standards and labeling programs already exist in North America, Europe and throughout Asia for products in China's 2010 standards and labeling programs, namely clothes washers, water dispensers, vending machines and CFLs. This report thus examines similarities and critical differences in energy efficiency values, test procedure specifications and other

  8. Organic solution-processible electroluminescent molecular glasses for non-doped standard red OLEDs with electrically stable chromaticity

    SciTech Connect (OSTI)

    Bi, Xiaoman; Zuo, Weiwei; Liu, Yingliang Zhang, Zhenru; Zeng, Cen; Xu, Shengang; Cao, Shaokui

    2015-10-15

    Highlights: • The D–A–D electroluminescent molecular glasses are synthesized. • Non-doped red electroluminescent film is fabricated by spin-coating. • Red OLED shows stable wavelength, luminous efficiency and chromaticity. • CIE1931 coordinate is in accord with standard red light in PAL system. - Abstract: Organic light-emitting molecular glasses (OEMGs) are synthesized through the introduction of nonplanar donor and branched aliphatic chain into electroluminescent emitters. The target OEMGs are characterized by {sup 1}H NMR, {sup 13}C NMR, IR, UV–vis and fluorescent spectra as well as elemental analysis, TG and DSC. The results indicated that the optical, electrochemical and electroluminescent properties of OEMGs are adjusted successfully by the replacement of electron-donating group. The non-doped OLED device with a standard red electroluminescent emission is achieved by spin-coating the THF solution of OEMG with a triphenylamine moiety. This non-doped red OLED device takes on an electrically stable electroluminescent performance, including the stable maximum electroluminescent wavelength of 640 nm, the stable luminous efficiency of 2.4 cd/A and the stable CIE1931 coordinate of (x, y) = (0.64, 0.35), which is basically in accord with the CIE1931 coordinate (x, y) = (0.64, 0.33) of standard red light in PAL system.

  9. Technical Assessment of Internal Surface Smoothness and Particle Transmission to the American National Standard ANSI/HPS N13.1-2011

    SciTech Connect (OSTI)

    Fritz, Brad G.; Barnett, J. M.

    2015-11-01

    Clause 6.4.4 in the American National Standards Institute / Health Physics Society (ANSI/HPS) N13.1 standard, Sampling and Monitoring Releases of Airborne Radioactive Substances From the Stacks and Ducts of Nuclear Facilities, addresses the internal smoothness of sample transport lines present between the nozzle and the analyzer (or collector). This paper evaluates the appropriateness of this clause by comparing roughness length of various materials against the required relative roughness, and by conducting computational fluid dynamic modeling. The results indicate that the inclusion of numerical criteria for the relative roughness of pipe by the ANSI Standard N13.1 (Section 6.4.4) is not appropriate. Recommended alternatives would be elimination of the numerical criteria, or modification of the standard to include a variable criteria for relative roughness.

  10. Fact #825: June 16, 2014 Tier 3 Non-Methane Organic Gases Plus Nitrogen Oxide Emission Standards, Model Years 2017-2025

    Broader source: Energy.gov [DOE]

    The Environmental Protection Agency finalized Tier 3 emission standards in a rule issued in March 2014. One effect of the rule is a decrease in the combined amount of non-methane organic gases ...

  11. Biosafety assessment protocols for new organisms in New Zealand: Can they apply internationally to emerging technologies?

    SciTech Connect (OSTI)

    Barratt, B.I.P. . E-mail: barbara.barratt@agresearch.co.nz; Moeed, A.; Malone, L.A.

    2006-05-15

    An analysis of established biosafety protocols for release into the environment of exotic plants and biological control agents for weeds and arthropod pests has been carried out to determine whether such protocols can be applied to relatively new and emerging technologies intended for the primary production industries, such as transgenic plants. Example case studies are described to indicate the scope of issues considered by regulators who make decisions on new organism releases. No transgenic plants have been released to date in New Zealand, but two field test approvals are described as examples. An analysis of the biosafety protocols has shown that, while many of the risk criteria considered for decision-making by regulators are similar for all new organisms, a case-by-case examination of risks and potential impacts is required in order to fully assess risk. The value of post-release monitoring and validation of decisions made by regulators is emphasised.

  12. ISO 14000 environmental management standard

    SciTech Connect (OSTI)

    Block, M.R.

    1995-12-01

    National standards organizations around the world are developing an environmental management standard to help organizations address significant environmental aspects of their activities. This standard, designated ISO 14000, will provide guidance for environmental management systems: environmental audits: Environmental performance evaluation: Environmental labeling and life-cycle assessment. The environmental management system specification, the lynch-pin of ISO 14000, will be published as an international standard in early 1996. Audit documents will follow shortly thereafter. Although conformance to ISO 14000 will be voluntary, US multinational companies are likely to discover that failure to participate creates trade barriers in Europe. The Environmental Commission created by NAFTA also is considering whether to make adherence to ISO 14000 a condition of trade. This presentation will provide an understanding of the ISO process to create the standard, key elements of ISO 14000, and implications for US companies. Such an understanding will enable organizations to determine whether adoption of ISO 14000 is strategically sound.

  13. Predicted concentrations in new relocatable classrooms of volatile organic compounds emitted from standard and alternate interior finish materials

    SciTech Connect (OSTI)

    Hodgson, Alfred T.; Fisk, William J.; Shendell, Derek G.; Apte, Michael G.

    2001-07-01

    Relocatable classrooms (RCs) are widely employed by California school districts to satisfy rapidly expanding space requirements due to population growth and class size reduction policies. There is public concern regarding indoor environmental quality (IEQ) in schools, particularly in RCs, but very little data to support or dispel these concerns. Several studies are investigating various aspects of IEQ in California schools. This laboratory-based study focused on evaluating the emissions of toxic and/or odorous volatile organic compounds (VOCs), including formaldehyde and acetaldehyde, from materials used to finish the interiors of new RCs. Furthermore, the study implemented a procedure for VOC source reduction by testing and selecting lower-emitting materials as substitutes for standard materials. In total, 17 standard and alternate floor coverings, wall panels and ceiling panels were quantitatively tested for emissions of VOCs using smallscale environmental chambers. Working with the largest northern California manufacturer of conventional RCs and two school districts, specifications were developed for four new RCs to be produced in early summer 2001. Two of these will be predominantly finished with standard materials. Alternate carpet systems, an alternate wall panel covering and an alternate ceiling panel were selected for the two other RCs based on the results of the laboratory study and considerations of cost and anticipated performance and maintenance. Particular emphasis was placed on reducing the concentrations of VOCs on California agency lists of toxic compounds. Indoor concentrations of toxic and odorous VOCs were estimated for the four classrooms by mass balance using the measured VOC emission factors, exposed surface areas of the materials in the RCs, and three ventilation rate scenarios. Results indicate that reductions in the concentrations of formaldehyde, acetaldehyde phenol, di(ethylene glycol) butyl ether, vinyl acetate, 1,2,4-trimethylbenzene

  14. Growth and Expansion of the International Criticality Safety Benchmark Evaluation Project and the Newly Organized International Reactor Physics Experiment Evaluation Project

    SciTech Connect (OSTI)

    J. Blair Briggs; Lori Scott; Yolanda Rugama; Enrico Satori

    2007-05-01

    Since ICNC 2003, the International Criticality Safety Benchmark Evaluation Project (ICSBEP) has continued to expand its efforts and broaden its scope. Criticality-alarm / shielding type benchmarks and fundamental physics measurements that are relevant to criticality safety applications are not only included in the scope of the project, but benchmark data are also included in the latest version of the handbook. A considerable number of improvements have been made to the searchable database, DICE and the criticality-alarm / shielding benchmarks and fundamental physics measurements have been included in the database. There were 12 countries participating on the ICSBEP in 2003. That number has increased to 18 with recent contributions of data and/or resources from Brazil, Czech Republic, Poland, India, Canada, and China. South Africa, Germany, Argentina, and Australia have been invited to participate. Since ICNC 2003, the contents of the “International Handbook of Evaluated Criticality Safety Benchmark Experiments” have increased from 350 evaluations (28,000 pages) containing benchmark specifications for 3070 critical or subcritical configurations to 442 evaluations (over 38,000 pages) containing benchmark specifications for 3957 critical or subcritical configurations, 23 criticality-alarm-placement / shielding configurations with multiple dose points for each, and 20 configurations that have been categorized as fundamental physics measurements that are relevant to criticality safety applications in the 2006 Edition of the ICSBEP Handbook. Approximately 30 new evaluations and 250 additional configurations are expected to be added to the 2007 Edition of the Handbook. Since ICNC 2003, a reactor physics counterpart to the ICSBEP, The International Reactor Physics Experiment Evaluation Project (IRPhEP) was initiated. Beginning in 1999, the IRPhEP was conducted as a pilot activity by the by the Organization of Economic Cooperation and Development (OECD) Nuclear Energy

  15. Several organic parameters on underlying hazardous constituents list can not be measured at the universal treatment standards

    SciTech Connect (OSTI)

    Johnson, H.C.

    1998-07-01

    The Idaho National Engineering and Environmental Laboratory (INEEL) has several permitted treatment, storage and disposal facilities. The INEEL Sample Management Office (SMO) conducts all analysis subcontracting activities for Department of Energy Environmental Management programs at the INEEL. In this role, the INEEL SMO has had the opportunity to subcontract the analyses of various wastes (including ash from an interim status incinerator) requesting a target analyte list equivalent to the constituents listed in 40 Code of Federal Regulations. These analyses are required to ensure that treated wastes do not contain underlying hazardous constituents (UHC) at concentrations greater than the universal treatment standards (UTS) prior to land disposal. The INEEL SMO has conducted a good-faith effort by negotiating with several commercial laboratories to identify the lowest possible quantitation and detection limits that can be achieved for the organic UHC analytes. The results of this negotiating effort has been the discovery that no single laboratory (currently under subcontract with the INEEL SMO) can achieve a detection level that is within an order of magnitude of the UTS for all organic parameters on a clean sample matrix (e.g., sand). This does not mean that there is no laboratory that can achieve the order of magnitude requirements for all organic UHCs on a clean sample matrix. The negotiations held to date indicate that it is likely that no laboratory can achieve the order of magnitude requirements for a difficult sample matrix (e.g., an incinerator ash). The authors suggest that the regulation needs to be revised to address the disparity between what is achievable in the laboratory and the regulatory levels required by the UTS.

  16. Environmental standards provide competitive advantage

    SciTech Connect (OSTI)

    Chynoweth, E.; Kirshner, E.

    1993-04-28

    Quality organizations are breaking new ground with the development of international standards for environmental management. These promise to provide the platform for chemical companies wanting to establish their environmental credibility with a global audience. [open quotes]It will be similar to auditing our customers to ISO 9000[close quote], says the environmental manager for a European chemical firm. [open quote]We will only want to deal with people who have got their environmental act together. And we'll be in a better competitive positions[close quote]. The International Organization for Standardization (ISO;Geneva) has set up a taskforce to develop an environmental management standard, which is expected to be completed by the mid-1990s. Observers think the ISO standard will draw heavily on the British Standard Institute's (BSI;London) environmental management standard, BS7750, which will likely be the first system adopted in the world. Published last year, BS7750 has been extensively piloted in the UK (CW, Sept. 30, 1992, p. 62) and is now set to be revised before being offically adopted by BSI. The UK's Chemical Industries Association (CIA;London) is anxious to prevent a proliferation of standards, and its report on BS7750 pilot projects calls for an approach integrating quality, environment, and health and safety. But standard setters, including ISO, appear to be moving in the opposite direction. In the US, the American national Standards Institute (ANSI;Washington) has started work on an environmental management standard.

  17. USE OF VOLUNTARY CONSENSUS STANDARDS AND INTERACTION WITH STANDARDS...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    USE OF VOLUNTARY CONSENSUS STANDARDS AND INTERACTION WITH STANDARDS DEVELOPMENT ORGANIZATIONS USE OF VOLUNTARY CONSENSUS STANDARDS AND INTERACTION WITH STANDARDS DEVELOPMENT ...

  18. USE OF VOLUNTARY CONSENSUS STANDARDS AND INTERACTION WITH STANDARDS

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DEVELOPMENT ORGANIZATIONS | Department of Energy USE OF VOLUNTARY CONSENSUS STANDARDS AND INTERACTION WITH STANDARDS DEVELOPMENT ORGANIZATIONS USE OF VOLUNTARY CONSENSUS STANDARDS AND INTERACTION WITH STANDARDS DEVELOPMENT ORGANIZATIONS Purpose This procedure identifies the process by which DOE adopts Voluntary Consensus Standards (VCSs) and provides guidance for the interaction of DOE and contractor employees with Standards Development Organizations (SDOs). Use of Voluntary Consensus

  19. National Agenda for Hydrogen Codes and Standards

    SciTech Connect (OSTI)

    Blake, C.

    2010-05-01

    This paper provides an overview of hydrogen codes and standards with an emphasis on the national effort supported and managed by the U.S. Department of Energy (DOE). With the help and cooperation of standards and model code development organizations, industry, and other interested parties, DOE has established a coordinated national agenda for hydrogen and fuel cell codes and standards. With the adoption of the Research, Development, and Demonstration Roadmap and with its implementation through the Codes and Standards Technical Team, DOE helps strengthen the scientific basis for requirements incorporated in codes and standards that, in turn, will facilitate international market receptivity for hydrogen and fuel cell technologies.

  20. Clear Standards | Open Energy Information

    Open Energy Info (EERE)

    Standards Place: Sterling, Virginia Product: Clear Standards provides enterprise software solutions to help global organizations accurately measure, mitigate, and monetize...

  1. Internal Dosimetry

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    MEASUREMENT SENSITIVE DOE-STD-1121-2008 Change Notice No.1 October 2013 DOE STANDARD INTERNAL DOSIMETRY U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document is available on the Department of Energy Technical Standards Program Web Site at http://energy.gov/hss/information-center/department-energy- technical-standards-program ii Change Notice 1. Internal Dosimetry DOE-STD-1121-2008 Page/Section

  2. Gene Calling Standards (GSC8 Meeting)

    ScienceCinema (OSTI)

    Kyrpides, Nikos [Genome Biology Program, DOE JGI

    2011-04-28

    The Genomic Standards Consortium was formed in September 2005. It is an international, open-membership working body which promotes standardization in the description of genomes and the exchange and integration of genomic data. The 2009 meeting was an activity of a five-year funding "Research Coordination Network" from the National Science Foundation and was organized held at the DOE Joint Genome Institute with organizational support provided by the JGI and by the University of California - San Diego. Nikos Kyrpides of the DOE Joint Genome Institute discusses gene calling standards at the Genomic Standards Consortium's 8th meeting at the DOE JGI in Walnut Creek, Calif. on Sept. 10, 2009.

  3. Organization Chart - Home

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    LSD Logo About Us People & Organization Research News & Events Safety Internal Resources Organization Chart Departments Scientific Staff Directory Committees Organization Chart...

  4. Internal shim

    DOE Patents [OSTI]

    Barth, Clyde H.; Blizinski, Theodore W.

    2003-05-13

    An internal shim used to accurately measure spaces in conjunction with a standard small probe has a shim top and a chassis. The internal shim is adjustably fixed within the space to be measured using grippers that emerge from the chassis and which are controlled by an arm pivotably attached to the shim top. A standard small probe passes through the shim along guides on the chassis and measures the distance between the exterior of the chassis and the boundary. By summing the measurements on each side of the chassis and the width of the chassis, the dimension of the space can be determined to within 0.001 inches.

  5. DOE Grant to organize "International Symposium on Opportunities in Underground Physics", Asilomar, CA, May 24-27, 2013

    SciTech Connect (OSTI)

    Babu, Kaladi S.

    2015-03-16

    The International Symposium in Opportunities in Underground Physics (ISOUP) was held in Asilomar, CA during May 24-27, 2013. The Symposium brought together scientists from the US and abroad for an open discussion on science opportunities provided by the possibility of a new generation of large underground detectors associated with long baseline neutrino beams. The Symposium was highly successful. The main focus of the Symposium was the science goals that could be achieved by placing such a detector deep underground.

  6. June 2008 Standards Forum and Standards Actions

    Office of Environmental Management (EM)

    Standards Forum And Standards Actions U.S. Department of Energy Office of Nuclear Safety, Quality Assurance and Environment June 2008 Technical Standards Program (http://www.hss.energy.gov/nuclearsafety/techstds/) Technical Standards Program Manager's Note As of this issue, our publication has a new look and focus. This is part of our effort to continuously improve the Technical Standards Program (TSP) processes and products. We have updated the TSP newsletter to make it more organized and user

  7. Reliability Standards Owner

    Broader source: Energy.gov [DOE]

    This position is located in the Organizational Delivery and Performance organization of the Internal Operations Management Office (IOM), Transmission System Operations (TO), Transmission Services ...

  8. SF 6432-IN International Commercial Transactions

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    IN (042015) SECTION II STANDARD TERMS AND CONDITIONS FOR INTERNATIONAL COMMERCIAL ... CONDITIONS Control : SF 6432-IN Title: Standard Terms & Conditions for International ...

  9. International Partnership for Hydrogen and Fuel Cells in the Economy |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Partnership for Hydrogen and Fuel Cells in the Economy International Partnership for Hydrogen and Fuel Cells in the Economy The United States is a founding member of the International Partnership for Hydrogen and Fuel Cells in the Economy (IPHE), which was created in 2003 to foster international cooperation on hydrogen and fuel cell R&D, common codes and standards, and information sharing on infrastructure development. The IPHE's 17 partners organize, evaluate, and

  10. 1997 DOE technical standards program workshop: Proceedings

    SciTech Connect (OSTI)

    1997-10-01

    The Department of Energy held its annual Technical Standards Program Workshop on July 8--10, 1997, at the Loews L`Enfant Plaza Hotel in Washington, DC. The workshop focused on aspects of implementation of the National Technology Transfer and Advancement Act of 1995 [Public Law (PL) 104-113] and the related revision (still pending) to OMB Circular A119 (OMB A119), Federal Participation in the Development and Use of Voluntary Standards. It also addressed DOE`s efforts in transitioning to a standards-based operating culture, and, through this transition, to change from a developer of internal technical standards to a customer of external technical standards. The workshop was designed to provide a forum to better understand how the new law is affecting Department activities. Panel topics such as ``Public Law 104-113 and Its Influence on Federal Agency Standards Activities`` and ``Update on Global Standards Issues`` provided insight on both the internal and external effects of the new law. Keynote speaker Richard Meier of Meadowbrook International (and formerly the Deputy Assistant US Trade Representative) addressed the subject of international trade balance statistics. He pointed out that increases in US export figures do not necessarily indicate increases in employment. Rather, increased employment results from product growth. Mr Meier also discussed issues such as the US migration to the sue of the metric system, the impact of budget limitations on Government participation in voluntary standards organizations, international standards ISO 9000 and ISO 14000, and DOE`s role in the worldwide transition from weapons production to cleanup.

  11. Internal Dosimetry

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    21-2008 October 2008 DOE STANDARD INTERNAL DOSIMETRY U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. NOT MEASUREMENT SENSITIVE ii This document is available on the Department of Energy Technical Standards Program Web Site at http://www.hss.energy.gov/nuclearsafety/techstds/ DOE-STD-1121-2008 iii FOREWORD 1. This Department of Energy (DOE) standard is approved for use by all DOE Components and their

  12. Gold Standard Program Model | Open Energy Information

    Open Energy Info (EERE)

    Standard Program Model Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Gold Standard Program Model AgencyCompany Organization: The Gold Standard Foundation Sector:...

  13. TECHNICAL STANDARDS PROGRAM TOPICAL COMMITTEES

    Broader source: Energy.gov [DOE]

    PurposeThis procedure describes how topical committees are organized and recognized under the Technical Standards Program. 

  14. Organization | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Organization Organization The organizational structure of the Office of International Affairs (IA) is as follows: Office of Resource Management (IA-10) Office of the Deputy ...

  15. international engagement | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    engagement International Engagement NNSA engages the international community by working with more than 60 foreign governments and 10 international organizations, plus several regional organizations, to improve nuclear emergency management systems worldwide. It is providing direct emergency management assistance to the

  16. Department of Energy Opens Appliance Standards Investigation...

    Energy Savers [EERE]

    Opens Appliance Standards Investigation for Certain Air Con International Air Conditioners and Heat Pumps Department of Energy Opens Appliance Standards Investigation for Certain ...

  17. International Energy: Subject Thesaurus. Revision 1

    SciTech Connect (OSTI)

    Not Available

    1993-11-01

    The International Energy Agency: Subject Thesaurus contains the standard vocabulary of indexing terms (descriptors) developed and structured to build and maintain energy information databases. Involved in this cooperative task are (1) the technical staff of the USDOE Office of Scientific and Technical Information (OSTI) in cooperation with the member countries of the International Energy Agency`s Energy Technology Data Exchange (ETDE) and (2) the International Atomic Energy Agency`s International Nuclear Information System (INIS) staff representing the more than 100 countries and organizations that record and index information for the international nuclear information community. ETDE member countries are also members of INIS. Nuclear information prepared for INIS by ETDE member countries is included in the ETDE Energy Database, which contains the online equivalent of the printed INIS Atomindex. Indexing terminology is therefore cooperatively standardized for use in both information systems. This structured vocabulary reflects thscope of international energy research, development, and technological programs. The terminology of this thesaurus aids in subject searching on commercial systems, such as ``Energy Science & Technology`` by DIALOG Information Services, ``Energy`` by STN International and the ``ETDE Energy Database`` by SilverPlatter. It is also the thesaurus for the Integrated Technical Information System (ITIS) online databases of the US Department of Energy.

  18. Technical Standards

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Review for Technical Standards of Interest Legend: Red = Technical Standards Program Activities and Responsibilities Blue = Directives Program Activities and Responsibilities

  19. ISO launches a project committee to develop an International...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    a project committee to develop an International Standard for energy management ISO launches a project committee to develop an International Standard for energy management ...

  20. PI Organization Chart | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    More Documents & Publications Office of Policy and International Affairs Organization Chart Office of International Affairs Organization Chart Microsoft PowerPoint - Nov...

  1. A NEW APPROACH TO DEVELOPMENT OF VOLUNTARY DECOMISSIONING STANDARDS

    SciTech Connect (OSTI)

    Lawrence M. Zull; Richard H. Meservey; Lawrence E. Boing

    2007-09-01

    The purpose of the Decontamination, Decommissioning, and Reutilization (DDR) Division of the American Nuclear Society (ANS) is to advance the technology of decontamination, decommissioning, and reutilization of nuclear and former nuclear installations, materials, facilities, and sites [1]. This includes sharing collective decommissioning experiences and lessons learned with others in the industry. An integral part of the work of the DDR Division is the preparation of voluntary decommissioning standards through its recently re-established DDR Standards Committee. This Committee intends to support development of various standards with other divisions of the ANS. The Committee also intends to participate with external organizations to disseminate information and lessons learned regarding decontamination activities, and participate in the development of voluntary decommissioning standards. External organizations, such as ASTM International, are involved in the development of consensus standards for nuclear decommissioning work. This paper describes the work of the DDR Standards Committee on a new co-operative initiative with ASTM International to develop voluntary consensus standards for nuclear decommissioning work.

  2. Standards Increase Market Confidence in SSL Performance

    SciTech Connect (OSTI)

    2013-09-30

    Fact sheet that reviews current and future SSL standards developed by DOE and other standards-setting organizations to effectively measure and characterize SSL lighting products.

  3. Interconnection Standards

    Office of Energy Efficiency and Renewable Energy (EERE)

    Note: The North Carolina Utilities Commission approved revised interconnection standards in May 2015. The new standards used the Federal Energy Regulatory Commission's most recent Small Generator...

  4. Standards, Ethics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Standards, Ethics Ombuds Standards and Ethics Committed to the fair and equitable treatment of all employees, contractors, and persons doing business with the Laboratory. Contact...

  5. Organization | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Organization Organization Organization

  6. Interconnection Standards

    Broader source: Energy.gov [DOE]

    Connecticut's interconnection guidelines, like FERC's standards, include provisions for three levels of systems:

  7. National/International Standards | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    with the Associate Principal Deputy Assistant Secretary for Environmental Management to Japan to determine how DOE nuclear safety and environmental remediation expertise can be...

  8. Terragenome: International Soil Metagenome Sequencing Consortium (GSC8 Meeting)

    ScienceCinema (OSTI)

    Jansson, Janet [LBNL

    2011-04-29

    The Genomic Standards Consortium was formed in September 2005. It is an international, open-membership working body which promotes standardization in the description of genomes and the exchange and integration of genomic data. The 2009 meeting was an activity of a five-year funding "Research Coordination Network" from the National Science Foundation and was organized held at the DOE Joint Genome Institute with organizational support provided by the JGI and by the University of California - San Diego. Janet Jansson of the Lawrence Berkeley National Laboratory discusses the Terragenome Initiative at the Genomic Standards Consortium's 8th meeting at the DOE JGI in Walnut Creek, Calif. on Sept. 9, 2009

  9. Interconnection Standards

    Broader source: Energy.gov [DOE]

    West Virginia's interconnection standards include two levels of review. The qualifications and application fees for each level are as follows:...

  10. Impact of the revised OSHA exposure standard on evaluation and control of benzene and other volatile organic chemicals in the liquid petroleum pipeline industry

    SciTech Connect (OSTI)

    Mercer, D.O.

    1989-01-01

    The primary purpose of this study was to determine the benzene exposure potential of workers in the liquid petroleum pipeline industry and to assess the impact of compliance with the revised standard on this industry. In addition, exposure to ethylene dibromide (EDB), and ethylene dichloride (EDC), which have toxicological profiles similar to that of benzene and are routinely found in this industry, were evaluated and appropriate control protocols were recommended. Exposure potential to benzene in excess of the 0.5 ppm (8-hour TWA) OSHA action level was shown to be limited to three free product handling operations, and that this increased exposure potential was dependent on the length of time necessary to perform the operations. The incidence and magnitude of benzene overexposure was not severe and control could be accomplished with engineering methods, along with work practice controls and personal protective equipment. Through application of a risk assessment model it was shown that 14 excess leukemia deaths per one thousand workers could be expected in the employee population that routinely performs those operation having maximum benzene exposure potential. This compares to less than on excess leukemia death per one thousand workers in the total work population. The evaluation of EDB and EDC indicated that exposure potential to EDB was of greatest concern. Even though exposure could be limited through application of standard industrial hygiene methods, any control protocol short of total elimination of EDB from the product stream may be not sufficient to reduce exposure to accepted levels.

  11. A National Set of Hydrogen Codes and Standards for the US (Presentation)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    National Set of Hydrogen Codes and Standards for the US 3 rd International Conference on Hydrogen Safety Carl H. Rivkin, P.E. September 16, 2009 Ajaccio, France NREL/PR-560-46604 National Renewable Energy Laboratory Innovation for Our Energy Future Overview The US has a national set of codes and standards that address the use of hydrogen technologies These documents are published by several organizations and are not all directly adopted by government authorities The US Department of Energy (DOE)

  12. Defining Genome Project Standards in a New Era of Sequencing (GSC8 Meeting)

    ScienceCinema (OSTI)

    Chain, Patrick [DOE JGI

    2011-04-28

    The Genomic Standards Consortium was formed in September 2005. It is an international, open-membership working body which promotes standardization in the description of genomes and the exchange and integration of genomic data. The 2009 meeting was an activity of a five-year funding "Research Coordination Network" from the National Science Foundation and was organized held at the DOE Joint Genome Institute with organizational support provided by the JGI and by the University of California - San Diego.

  13. Internal Audit | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Internal Audit Internal auditing is an independent, objective assurance and consulting activity designed to add value and improve an organization's operations. It helps an organization accomplish its objectives by bringing a systematic, disciplined approach to evaluate and improve the effectiveness of risk management, control, and governance processes. For information, contact: Fran Dunshee, 515-294-8098 dunshee@ameslab.gov

  14. Standardizing Naming Conventions in Radiation Oncology

    SciTech Connect (OSTI)

    Santanam, Lakshmi; Hurkmans, Coen; Mutic, Sasa; Vliet-Vroegindeweij, Corine van; Brame, Scott; Straube, William; Galvin, James; Tripuraneni, Prabhakar; Michalski, Jeff; Bosch, Walter

    2012-07-15

    Purpose: The aim of this study was to report on the development of a standardized target and organ-at-risk naming convention for use in radiation therapy and to present the nomenclature for structure naming for interinstitutional data sharing, clinical trial repositories, integrated multi-institutional collaborative databases, and quality control centers. This taxonomy should also enable improved plan benchmarking between clinical institutions and vendors and facilitation of automated treatment plan quality control. Materials and Methods: The Advanced Technology Consortium, Washington University in St. Louis, Radiation Therapy Oncology Group, Dutch Radiation Oncology Society, and the Clinical Trials RT QA Harmonization Group collaborated in creating this new naming convention. The International Commission on Radiation Units and Measurements guidelines have been used to create standardized nomenclature for target volumes (clinical target volume, internal target volume, planning target volume, etc.), organs at risk, and planning organ-at-risk volumes in radiation therapy. The nomenclature also includes rules for specifying laterality and margins for various structures. The naming rules distinguish tumor and nodal planning target volumes, with correspondence to their respective tumor/nodal clinical target volumes. It also provides rules for basic structure naming, as well as an option for more detailed names. Names of nonstandard structures used mainly for plan optimization or evaluation (rings, islands of dose avoidance, islands where additional dose is needed [dose painting]) are identified separately. Results: In addition to its use in 16 ongoing Radiation Therapy Oncology Group advanced technology clinical trial protocols and several new European Organization for Research and Treatment of Cancer protocols, a pilot version of this naming convention has been evaluated using patient data sets with varying treatment sites. All structures in these data sets were

  15. Interconnection Standards

    Broader source: Energy.gov [DOE]

    In response to state legislation enacted in 2001, in September 2004 the Minnesota Public Utilities Commission (MPUC) adopted an order establishing generic standards for utility tariffs for...

  16. Interconnection Standards

    Broader source: Energy.gov [DOE]

    NOTE: On March 2016, the NY Public Service Commission (PSC) modified the Standard Interconnection Requirements (SIR) increasing the maximum threshold for interconnection capacity of distributed...

  17. Interconnection Standards

    Broader source: Energy.gov [DOE]

    Technical screens have been established for each level, and the Institute of Electrical and Electronics Engineers 1547 technical standard is used for all interconnections. Reasonable time frames ...

  18. Interconnection Standards

    Office of Energy Efficiency and Renewable Energy (EERE)

    Massachusetts' interconnection standards apply to all forms of distributed generation (DG), including renewables, and to all customers of the state's three investor-owned utilities (Unitil,...

  19. Interconnection Standards

    Office of Energy Efficiency and Renewable Energy (EERE)

    The interconnection standards approved by the PUC also updated Nevada's net-metering policy, originally enacted in 1997. Previously, Nevada Revised Statute 704.774 addressed basic interconnection...

  20. Interconnection Standards

    Office of Energy Efficiency and Renewable Energy (EERE)

    Virginia has two interconnection standards: one for net-metered systems and one for systems that are not net-metered.

  1. Open Issues in the Development of Safety Standards for Compressed...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Issues in the Development of Safety Standards for Compressed Hydrogen Storage at SAE-International Open Issues in the Development of Safety Standards for Compressed Hydrogen...

  2. International Commitments Primer | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    International Commitments » International Commitments Primer International Commitments Primer Overview of International Commitment Process DOE pursues a variety of science and technology goals with other governments and international organizations, like sharing scientific data, cooperating research and development of common interest, and sharing scientific expertise, methodologies, and facilities, all of which motivate establishing relationships through agreements with foreign counterparts.

  3. Find Standards

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    API ASCE ASHRAE ASME ASME-BPVC ASQ ASSE ASTM AWS CGA standards - contact Timothy Lopez (timlopez@lanl.gov), Ben Swartz (abswartz@lanl.gov), or Roberto Trujillo (robertot@lanl.gov) ...

  4. EOS standards

    SciTech Connect (OSTI)

    Greeff, Carl W

    2011-01-12

    An approach to creating accurate EOS for pressure standards is described. Applications to Cu, Au, and Ta are shown. Extension of the method to high compressions using DFT is illustrated. Comparisons with modern functionals show promise.

  5. Interconnection Standards

    Broader source: Energy.gov [DOE]

    The PSC has published two sets of standard forms for interconnection, available on the program web site. One set pertains to systems smaller than 20 kW while the second set applies to larger syst...

  6. Interconnection Standards

    Broader source: Energy.gov [DOE]

    The PUC standards generally apply to investor-owned utilities (IOUs) with 40,000 or more customers and all electric cooperatives. Municipal utilities with 5,000 customers or more are required to ...

  7. Interconnection Standards

    Broader source: Energy.gov [DOE]

    The revised standards provide for three separate levels of interconnection based on system capacity and other requirements. The first level, Tier 1 systems, applies generally to systems up to 25...

  8. Interconnection Standards

    Broader source: Energy.gov [DOE]

    Utah’s interconnection rules are based on the Federal Energy Regulatory Commission’s (FERC) interconnection standards for small generators, adopted in May 2005 by FERC Order 2006. Utah's rules fo...

  9. International petroleum statistics report

    SciTech Connect (OSTI)

    1995-10-01

    The International Petroleum Statistics Report is a monthly publication that provides current international oil data. This report presents data on international oil production, demand, imports, exports and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). Section 2 presents an oil supply/demand balance for the world, in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries.

  10. Standards and the INSDC: Submission of MIGS, MIMS, MIENS (GSC8 Meeting)

    ScienceCinema (OSTI)

    Mizrachi, Ilene [NCBI

    2011-04-29

    The Genomic Standards Consortium was formed in September 2005. It is an international, open-membership working body which promotes standardization in the description of genomes and the exchange and integration of genomic data. The 2009 meeting was an activity of a five-year funding "Research Coordination Network" from the National Science Foundation and was organized held at the DOE Joint Genome Institute with organizational support provided by the JGI and by the University of California - San Diego. Ilene Mizrachi of the NCBI talks about submission of MIGS/MIMS/MIENS information at the Genomic Standards Consortium's 8th meeting at the DOE JGI in Walnut Creek, Calif. on Sept. 9, 2009.

  11. Technical Standards Newsletter - May 2008 | Department of Energy

    Office of Environmental Management (EM)

    08 Technical Standards Newsletter - May 2008 Document Status on 04-25-2008 Inside this issue: DOE Standards Actions 1 New Projects and Technical Standards in Revision 1 DOE Technical Standards Posted in RevCom for TSP 1 DOE Technical Standards in Reaffirmation 1 DOE Technical Standards Change Notices 1 DOE Technical Standards Published 1 Non-Government Standards Actions 2 American National Standards Institute (ANSI) 2 American Society of Mechanical Engineers (ASME) 2 ASTM International 2

  12. Anthony International: Order (2013-CE-5357)

    Broader source: Energy.gov [DOE]

    DOE ordered Anthony International to pay a $8,000 civil penalty after finding Anthony International had failed to certify that any basic models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

  13. International Refrigeration: Order (2012-CE-1510)

    Broader source: Energy.gov [DOE]

    DOE ordered International Refrigeration Products to pay an $8,000 civil penalty after finding International Refrigeration had failed to certify that certain room air conditioners comply with the applicable energy conservation standard.

  14. Volume International: Order (2014-CE-32014)

    Broader source: Energy.gov [DOE]

    DOE ordered Volume International Corporation to pay a $8,000 civil penalty after finding Volume International had failed to certify that certain models of ceiling fans comply with the applicable energy conservation standards.

  15. Petrochemical industry standards activity aimed at improving the mechanical integrity of process piping

    SciTech Connect (OSTI)

    Reynolds, J.T.

    1996-07-01

    This paper will cover numerous changes being made to existing standards and several new standards being created, all focusing on increasing mechanical integrity of petrochemical industry process piping. Those new standards include ones for (1) Risk-Based Inspection (2) Fitness for Service Analysis, (3) Positive Material Identification, and (4) In-service Inspection and Maintenance for Process Piping. A progress report is included for the Process Industry Practices (PIP) being created to consolidate individual company piping standards into one consistent industry set. And finally, recent initiatives toward standards cooperation/coordination between the American Petroleum Institute(API), American Society of Mechanical Engineers (ASME), International Standards Organization (ISO) and National Board are highlighted.

  16. Office of International Affairs Org Chart | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Office of International Affairs Org Chart Office of International Affairs Org Chart The Organizational Chart for the Office of International Affairs at the U.S. Department of Energy. The Organizational Chart for the Office of International Affairs at the U.S. Department of Energy. (104.38 KB) More Documents & Publications Office of International Affairs Organization Chart PI Organization Chart Office of Policy and International Affairs Organization Chart

  17. Savannah River Analytical Laboratories Achieve International...

    National Nuclear Security Administration (NNSA)

    Savannah River Analytical Laboratories Achieve International Standard Accreditation Tuesday, September 8, 2015 - 12:55pm Savannah River National Laboratory's FH Analytical ...

  18. International Energy Agency Technology Roadmap for Wind Energy...

    Open Energy Info (EERE)

    Agency Technology Roadmap for Wind Energy Jump to: navigation, search Name International Energy Agency Technology Roadmap for Wind Energy AgencyCompany Organization International...

  19. LBNL-Climate Change and International Studies | Open Energy Informatio...

    Open Energy Info (EERE)

    Climate Change and International Studies Jump to: navigation, search Name LBNL-Climate Change and International Studies AgencyCompany Organization Lawrence Berkeley National...

  20. Standards Development for Solid-State Lighting

    SciTech Connect (OSTI)

    2011-12-16

    To accelerate the development and implementation of needed standards for solid-state lighting products, DOE works closely with a network of standards-setting organizations and offers technical assistance and support

  1. International Conference

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Internal Combustion Engine Basics Internal Combustion Engine Basics November 22, 2013 - 2:02pm Addthis Pictured here is an animation showing the basic mechanics of how an internal combustion engine works. With support from the Energy Department, General Motors researchers developed a new technology -- the Intake Valve Lift Control -- that is helping save fuel and lower emissions in the 2014 Chevy Impala. As visualized in the closeup of the graphic, the Intake Valve Lift Control can operate at

  2. Solar Working Group Releases Standard Contracts - News Releases...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Standard Contracts NREL-organized group aims to improve access to low-cost capital November 5, 2013 A working group representing solar industry stakeholders has developed standard ...

  3. Amnesty International

    ScienceCinema (OSTI)

    None

    2011-04-25

    Martin Ennals est secrétaire général d'Amnesty International et fait un discours sur les droits de l'homme

  4. An Introduction to SAE Hydrogen Fueling Standardization

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Introduction to SAE Hydrogen Fueling Standardization Will James U.S. Department of Energy Fuel Cell Technologies Office 2 | Fuel Cell Technologies Office eere.energy.gov 2 Question and Answer * Please type your question into the question box hydrogenandfuelcells.energy.gov SAE INTERNATIONAL U.S. DOE WEBINAR: An Introduction to SAE Hydrogen Fueling Standardization SAE INTERNATIONAL PARTICIPANTS AND AGENDA 4 DOE WEBINAR: An Introduction to SAE Hydrogen Fueling Standardization *Will James -

  5. Final Technical Report: Hydrogen Codes and Standards Outreach

    SciTech Connect (OSTI)

    Hall, Karen I.

    2007-05-12

    This project contributed significantly to the development of new codes and standards, both domestically and internationally. The NHA collaborated with codes and standards development organizations to identify technical areas of expertise that would be required to produce the codes and standards that industry and DOE felt were required to facilitate commercialization of hydrogen and fuel cell technologies and infrastructure. NHA staff participated directly in technical committees and working groups where issues could be discussed with the appropriate industry groups. In other cases, the NHA recommended specific industry experts to serve on technical committees and working groups where the need for this specific industry expertise would be on-going, and where this approach was likely to contribute to timely completion of the effort. The project also facilitated dialog between codes and standards development organizations, hydrogen and fuel cell experts, the government and national labs, researchers, code officials, industry associations, as well as the public regarding the timeframes for needed codes and standards, industry consensus on technical issues, procedures for implementing changes, and general principles of hydrogen safety. The project facilitated hands-on learning, as participants in several NHA workshops and technical meetings were able to experience hydrogen vehicles, witness hydrogen refueling demonstrations, see metal hydride storage cartridges in operation, and view other hydrogen energy products.

  6. International perspectives on mitigating laboratory biorisks.

    SciTech Connect (OSTI)

    Pinard, William J.; Salazar, Carlos A.

    2010-11-01

    The International Perspectives on Mitigating Laboratory Biorisks workshop, held at the Renaissance Polat Istanbul Hotel in Istanbul, Republic of Turkey, from October 25 to 27, 2010, sought to promote discussion between experts and stakeholders from around the world on issues related to the management of biological risk in laboratories. The event was organized by Sandia National Laboratories International Biological Threat Reduction program, on behalf of the US Department of State Biosecurity Engagement Program and the US Department of Defense Cooperative Biological Engagement Program. The workshop came about as a response to US Under Secretary of State Ellen O. Tauscher's statements in Geneva on December 9, 2009, during the Annual Meeting of the States Parties to the Biological Weapons Convention (BWC). Pursuant to those remarks, the workshop was intended to provide a forum for interested countries to share information on biorisk management training, standards, and needs. Over the course of the meeting's three days, participants discussed diverse topics such as the role of risk assessment in laboratory biorisk management, strategies for mitigating risk, measurement of performance and upkeep, international standards, training and building workforce competence, and the important role of government and regulation. The meeting concluded with affirmations of the utility of international cooperation in this sphere and recognition of positive prospects for the future. The workshop was organized as a series of short presentations by international experts on the field of biorisk management, followed by breakout sessions in which participants were divided into four groups and urged to discuss a particular topic with the aid of a facilitator and a set of guiding questions. Rapporteurs were present during the plenary session as well as breakout sessions and in particular were tasked with taking notes during discussions and reporting back to the assembled participants a brief

  7. International Engagement | National Nuclear Security Administration |

    National Nuclear Security Administration (NNSA)

    (NNSA) International Engagement NNSA engages the international community by working with more than 60 foreign governments and 10 international organizations, plus several regional organizations, to improve nuclear emergency management systems worldwide. It is providing direct emergency management assistance to the International Atomic Energy Agency (IAEA), Nuclear Energy Agency (NEA), Argentina, Armenia, Brazil, China, Georgia, Iraq, Japan, Mexico, Russia, South Korea, and Taiwan. New

  8. Thinking Globally: How ISO 50001 - Energy Management can make industrial energy efficiency standard practice

    SciTech Connect (OSTI)

    McKane, Aimee; Desai, Deann; Matteini, Marco; Meffert, William; Williams, Robert; Risser, Roland

    2009-08-01

    Industry utilizes very complex systems, consisting of equipment and their human interface, which are organized to meet the production needs of the business. Effective and sustainable energy efficiency programs in an industrial setting require a systems approach to optimize the integrated whole while meeting primary business requirements. Companies that treat energy as a manageable resource and integrate their energy program into their management practices have an organizational context to continually seek opportunities for optimizing their energy use. The purpose of an energy management system standard is to provide guidance for industrial and commercial facilities to integrate energy efficiency into their management practices, including fine-tuning production processes and improving the energy efficiency of industrial systems. The International Organization for Standardization (ISO) has identified energy management as one of its top five priorities for standards development. The new ISO 50001 will establish an international framework for industrial, commercial, or institutional facilities, or entire companies, to manage their energy, including procurement and use. This standard is expected to achieve major, long-term increases in energy efficiency (20percent or more) in industrial, commercial, and institutional facilities and to reduce greenhouse gas (GHG) emissions worldwide.This paper describes the impetus for the international standard, its purpose, scope and significance, and development progress to date. A comparative overview of existing energy management standards is provided, as well as a discussion of capacity-building needs for skilled individuals to assist organizations in adopting the standard. Finally, opportunities and challenges are presented for implementing ISO 50001 in emerging economies and developing countries.

  9. International Institute for Environment and Development | Open...

    Open Energy Info (EERE)

    and Development is an organization based in London, United Kingdom. "As an independent international research organisation, we are specialists in linking local to global. In...

  10. International Partnership on Mitigation and Measuring, Reporting...

    Open Energy Info (EERE)

    Organization German Federal Ministry for the Environment, Nature Conservancy and Nuclear Safety (BMU), German Agency for International Cooperation (GIZ) Sector Climate Focus...

  11. International Forest Policy Database | Open Energy Information

    Open Energy Info (EERE)

    Database Jump to: navigation, search Tool Summary LAUNCH TOOL Name: International Forest Policy Database AgencyCompany Organization: GTZ Sector: Land Focus Area: Forestry...

  12. Building International Emergency Management Systems | National...

    National Nuclear Security Administration (NNSA)

    Generally, NNSA will assist foreign governments and international organizations with integration of emergency-program core elements, including communications systems, networks and ...

  13. High Availability Electronics Standards

    SciTech Connect (OSTI)

    Larsen, R.S.; /SLAC

    2006-12-13

    Availability modeling of the proposed International Linear Collider (ILC) predicts unacceptably low uptime with current electronics systems designs. High Availability (HA) analysis is being used as a guideline for all major machine systems including sources, utilities, cryogenics, magnets, power supplies, instrumentation and controls. R&D teams are seeking to achieve total machine high availability with nominal impact on system cost. The focus of this paper is the investigation of commercial standard HA architectures and packaging for Accelerator Controls and Instrumentation. Application of HA design principles to power systems and detector instrumentation are also discussed.

  14. Roadmap for Testing and Validation of Electric Vehicle Communication Standards

    SciTech Connect (OSTI)

    Pratt, Richard M.; Tuffner, Francis K.; Gowri, Krishnan

    2012-07-12

    Vehicle to grid communication standards are critical to the charge management and interoperability among plug-in electric vehicles (PEVs), charging stations and utility providers. The Society of Automobile Engineers (SAE), International Organization for Standardization (ISO), International Electrotechnical Commission (IEC) and the ZigBee Alliance are developing requirements for communication messages and protocols. While interoperability standards development has been in progress for more than two years, no definitive guidelines are available for the automobile manufacturers, charging station manufacturers or utility backhaul network systems. At present, there is a wide range of proprietary communication options developed and supported in the industry. Recent work by the Electric Power Research Institute (EPRI), in collaboration with SAE and automobile manufacturers, has identified performance requirements and developed a test plan based on possible communication pathways using power line communication (PLC). Though the communication pathways and power line communication technology options are identified, much work needs to be done in developing application software and testing of communication modules before these can be deployed in production vehicles. This paper presents a roadmap and results from testing power line communication modules developed to meet the requirements of SAE J2847/1 standard.

  15. International Fellows

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Alexander and Lienert selected as ASM International Fellows November 6, 2013 David Alexander and Thomas Lienert of Metallurgy (MST-6) are among ASM International's 2013 Class of Fellows, who are honored for their distinguished contributions to materials science and engineering. A total of nine ASM fellows have come from Los Alamos over the years, according to the society, which is commemorating its 100th anniversary. Alexander achievements The citation for Alexander reads: "For excellence

  16. International Sunport

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    International Programs International Programs The U.S. Department of Energy (DOE) Office of Environmental Management (EM) has a mission to complete the safe clean-up of the environmental legacy resulting from six decades of weapons production and energy research. This effort is recognized as one of the largest and most diverse and technically complex environmental clean-up operations in the world. As described in the DOE Strategic Plan, to accomplish this mission, the Department will leverage

  17. International Feedstock

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1.2.1.5 International Feedstock March 24, 2015 Feedstocks Patrick Lamers, PhD Idaho National Laboratory This presentation does not contain any proprietary, confidential, or otherwise restricted information 2 | Bioenergy Technologies Office Goal Statement Put the U.S. bioeconomy strategy in the context of global, competitive feedstock markets. * Evaluate international impacts on U.S. feedstock supply costs * Improve U.S. feedstock cost and volume projections * Leverage existing expertise and

  18. DOE-TSPP-4, Registering a Technical Standard Project - August...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    to DOE Technical Standards, or to register a person's or organization's intent to work with a non-Government standards body to prepare or revise a non-Government standard. ...

  19. International Energy Agency

    SciTech Connect (OSTI)

    Claudy, D.E.

    1982-01-01

    The International Energy Agency (IEA) responded to the 1973-1974 oil embargo with an emergency allocation program outlined in the Agreement on an International Energy Program (IEP), viewed by the US as an executive agreement and by most participants as a treaty. The IEA's four standing groups on Relations with Producer and other Consumer Countries, on Long-Term Cooperation, on the Oil Market, and on Emergency Questions are organized to accommodate co041869flicting interests through voting rights and to allow constructive interaction among intergovernmental bodies. A description of the allocation system and industry's role in emergencies is followed by a summary of US legal requirements relating to these activities. Four appendices reproduce the IEP Agreement and diagram the IEA organizational structure, the IEA emergency allocation system, and the Emergency Management Organization. (DCK)

  20. 1998 federal technical standards workshop: Proceedings

    SciTech Connect (OSTI)

    1998-10-01

    The theme for the 1998 workshop was Standards Management -- A World of Change and Opportunities. The workshop`s goal was to further the implementation of the National Technology Transfer and Advancement Act of 1995 (Public Law 104-113) through the sharing of standards management success stories, lessons learned, and emerging initiatives within the Executive Branch of the Federal Government. The target audience for this workshop included agency/department and contractor personnel and representatives of standards developing organizations that either used technical standards in their work for the Federal Government of participated in standards writing/management activities in support of the missions and programs of Federal agencies/departments. As with previous standards workshops sponsored by the DOE, views on the technical subject areas under the workshop theme were solicited from and provided by agency Standards Executives and standards program managers, voluntary standards organizations, and the private sector. This report includes vugraphs of the presentations.

  1. International petroleum statistics report

    SciTech Connect (OSTI)

    1997-11-01

    This document is a monthly publication which provides current data on international oil production,demand,imports and stocks. This report has four sections which contain time series data on world oil production and oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). Also included is oil supply/demand balance information for the world, and data on oil imports and trade by OECD countries.

  2. International energy outlook 1994

    SciTech Connect (OSTI)

    Not Available

    1994-07-01

    The International Energy Outlook 1994 (IEO94) presents an assessment by the Energy Information Administration (EIA) of the outlook for international energy markets between 1990 and 2010. The report is provided as a statistical service to assist energy managers and analysts, both in government and in the private sector. These forecasts are used by international agencies, Federal and State governments, trade associations, and other planners and decisionmakers. They are published pursuant to the Depart. of Energy Organization Act of 1977 (Public Law 95-91), Section 205(c). The IEO94 projections are based on US and foreign government policies in effect on October 1, 1993-which means that provisions of the Climate Change Action Plan unveiled by the Administration in mid-October are not reflected by the US projections.

  3. A Comparison of Cross-Sector Cyber Security Standards

    SciTech Connect (OSTI)

    Robert P. Evans

    2005-09-01

    This report presents a review and comparison (commonality and differences) of three cross-sector cyber security standards and an internationally recognized information technology standard. The comparison identifies the security areas covered by each standard and reveals where the standards differ in emphasis. By identifying differences in the standards, the user can evaluate which standard best meets their needs. For this report, only cross-sector standards were reviewed.

  4. Regulations, Guidelines and Codes and Standards | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Current Approaches to Safety, Codes & Standards » Regulations, Guidelines and Codes and Standards Regulations, Guidelines and Codes and Standards Many regulations, guidelines, and codes and standards have already been established through years of hydrogen use in industrial and aerospace applications. In addition, systems and organizations are already in place to establish codes and standards that facilitate hydrogen and fuel cell commercialization. Standards Development Organizations

  5. Organic contaminant separator

    DOE Patents [OSTI]

    Del Mar, Peter; Hemberger, Barbara J.

    1991-01-01

    A process of sample preparation prior to analysis for the concentration of an organic contaminant in an aqueous medium by (a) passing an initial aqueous medium including a minor amount of the organic contaminant through a polyolefin tube having an internal diameter of from about 0.01 to about 2.0 millimeters and being of sufficient length to permit the organic contaminant to adhere to the tube, (b) passing a solvent through the tube, said solvent capable of separating the adhered organic contaminant from the tube. Further, a chromatographic apparatus for sample preparation prior to analysis for the concentration of an organic contaminant in an aqueous medium, said apparatus including a polyolefin tube having an internal diameter of from about 0.01 to about 2.0 millimeters and being of sufficient length to permit an organic contaminant contained within an aqueous medium passed therethrough to adhere to the tube is disclosed.

  6. DOE-TSPP-11, Technical Standards Program Topical Committees- July 1, 2009

    Broader source: Energy.gov [DOE]

    This procedure describes how topical committees are organized and recognized under the Technical Standards Program.

  7. DOE-TSPP-11, Technical Standards Program Topical Committees- August 1, 2000

    Broader source: Energy.gov [DOE]

    This procedure describes how topical committees are organized and recognized under the Technical Standards Program.

  8. DOE-TSPP-9-2013, DOE Technical Standards Program Topical Committees

    Office of Energy Efficiency and Renewable Energy (EERE)

    This procedure describes how topical committees are organized and recognized under the Technical Standards Program (TSP).

  9. Vehicle to Grid Communication Standards Development, Testing and Validation - Status Report

    SciTech Connect (OSTI)

    Gowri, Krishnan; Pratt, Richard M.; Tuffner, Francis K.; Kintner-Meyer, Michael CW

    2011-09-01

    In the US, more than 10,000 electric vehicles (EV) have been delivered to consumers during the first three quarters of 2011. A large majority of these vehicles are battery electric, often requiring 220 volt charging. Though the vehicle manufacturers and charging station manufacturers have provided consumers options for charging preferences, there are no existing communications between consumers and the utilities to manage the charging demand. There is also wide variation between manufacturers in their approach to support vehicle charging. There are in-vehicle networks, charging station networks, utility networks each using either cellular, Wi-Fi, ZigBee or other proprietary communication technology with no standards currently available for interoperability. The current situation of ad-hoc solutions is a major barrier to the wide adoption of electric vehicles. SAE, the International Standards Organization/International Electrotechnical Commission (ISO/IEC), ANSI, National Institute of Standards and Technology (NIST) and several industrial organizations are working towards the development of interoperability standards. PNNL has participated in the development and testing of these standards in an effort to accelerate the adoption and development of communication modules.

  10. EM international activities. February 1997 highlights

    SciTech Connect (OSTI)

    1997-02-01

    EM International Highlights is a brief summary of on-going international projects within the Department of Energy`s Office of Environmental Management (EM). This document contains sections on: Global Issues, activities in Western Europe, activities in central and Eastern Europe, activities in Russia, activities in Asia and the Pacific Rim, activities in South America, activities in North America, and International Organizations.

  11. Codes and Standards Activities | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE Activities » Codes and Standards Activities Codes and Standards Activities The Fuel Cell Technologies Office works with code development organizations, code officials, industry experts, and national laboratory scientists to draft new model codes and equipment standards that cover emerging hydrogen technologies for consideration by the various code enforcing jurisdictions. DOE's codes and standards activities are focused on: Developing training programs for state and local officials that

  12. INTERNATIONAL AGREEMENTS

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    INTERNATIONAL AGREEMENTS Signed by Secretary Spencer Abraham January 2001-December 2004 TABLE OF CONTENTS Joint Statement of ntent between the Department of Energy of the United States ofAmerica and The Ministry of Energy and Mines of the Republic ofPeru on Cooperation in the Field of Energy -Tab 1 Fifth Hemispheric Energy Ministers Meeting Mexico City, Mexico - March 9, 2001. Mexico Declaration - Energy: A Crucial Factor for Integration and Sustainable Development in the Hemisphere - Tab 2

  13. International Collaboration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Chapter 6 Buildings sector energy consumption Overview Energy consumed in the buildings sector consists of residential and commercial end users and accounts for 20.1% of the total delivered energy consumed worldwide. Consumption of delivered, or site, energy contrasts with the use of the primary energy that also includes the energy used to generate and deliver electricity to individual sites such as homes, offices, or industrial plants. In the International Energy Outlook 2016 (IEO2016)

  14. International Affairs - DOE Directives, Delegations, and Requirements

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    International Affairs

  15. Technical Standards Managers

    Broader source: Energy.gov (indexed) [DOE]

    FACILITYADDRESS LOC CODE DOE TECHNICAL STANDARD MANAGERS AU-30 DOE Technical Standards ... FACILITYADDRESS LOC CODE DOE TECHNICAL STANDARD MANAGERS DOE-CTA TSM Gustave E. (Bud) ...

  16. Nuclear Data Verification and Standardization

    SciTech Connect (OSTI)

    Karam, Lisa R.; Arif, Muhammad; Thompson, Alan K.

    2011-10-01

    The objective of this interagency program is to provide accurate neutron interaction verification and standardization data for the U.S. Department of Energy Division of Nuclear Physics programs which include astrophysics, radioactive beam studies, and heavy-ion reactions. The measurements made in this program are also useful to other programs that indirectly use the unique properties of the neutron for diagnostic and analytical purposes. These include homeland security, personnel health and safety, nuclear waste disposal, treaty verification, national defense, and nuclear based energy production. The work includes the verification of reference standard cross sections and related neutron data employing the unique facilities and capabilities at NIST and other laboratories as required; leadership and participation in international intercomparisons and collaborations; and the preservation of standard reference deposits. An essential element of the program is critical evaluation of neutron interaction data standards including international coordinations. Data testing of critical data for important applications is included. The program is jointly supported by the Department of Energy and the National Institute of Standards and Technology.

  17. International Energy Agency (IEA) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    International Energy Agency (IEA) International Energy Agency (IEA) History The International Energy Agency is an international energy forum comprised of 29 industrialized countries under the Organization for Economic Development and Cooperation (OECD). The IEA was established in 1974, in the wake of the 1973/74 oil crisis, to help its members respond to major oil supply disruptions, a role it continues to fulfill today. IEA's mandate has expanded over time to include tracking and analyzing

  18. ISA Approves Standard for Wireless Automation in Process Control

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Applications | Department of Energy ISA Approves Standard for Wireless Automation in Process Control Applications ISA Approves Standard for Wireless Automation in Process Control Applications On September 9, the Standards and Practices Board of the International Society for Automation (ISA) approved the ISA-100.11a wireless standard, "Wireless Systems for Industrial Automation: Process Control and Related Applications," making it an official ISA standard. ISA Approves Standard for

  19. International energy annual 1995

    SciTech Connect (OSTI)

    1996-12-01

    The International Energy Annual presents information and trends on world energy production and consumption for petroleum, natural gas, coal, and electricity. Production and consumption data are reported in standard units as well as British thermal units (Btu). Trade and reserves are shown for petroleum, natural gas, and coal. Data are provided on crude oil refining capacity and electricity installed capacity by type. Prices are included for selected crude oils and for refined petroleum products in selected countries. Population and Gross Domestic Product data are also provided.

  20. International nuclear fuel cycle fact book. Revision 4

    SciTech Connect (OSTI)

    Harmon, K.M.; Lakey, L.T.; Leigh, I.W.

    1984-03-01

    This Fact Book has been compiled in an effort to provide (1) an overview of worldwide nuclear power and fuel cycle programs and (2) current data concerning fuel cycle and waste management facilities, R and D programs, and key personnel in countries other than the United States. Additional information on each country's program is available in the International Source Book: Nuclear Fuel Cycle Research and Development, PNL-2478, Rev. 2. The Fact Book is organized as follows: (1) Overview section - summary tables which indicate national involvement in nuclear reactor, fuel cycle, and waste management development activities; (2) national summaries - a section for each country which summarizes nuclear policy, describes organizational relationships and provides addresses, names of key personnel, and facilities information; (3) international agencies - a section for each of the international agencies which has significant fuel cycle involvement; (4) energy supply and demand - summary tables, including nuclear power projections; (5) fuel cycle - summary tables; and (6) travel aids - international dialing instructions, international standard time chart, passport and visa requirements, and currency exchange rate.

  1. International Nuclear Fuel Cycle Fact Book. Revision 5

    SciTech Connect (OSTI)

    Harmon, K.M.; Lakey, L.T.; Leigh, I.W.; Jeffs, A.G.

    1985-01-01

    This Fact Book has been compiled in an effort to provide: (1) an overview of worldwide nuclear power and fuel cycle programs; and (2) current data concerning fuel cycle and waste management facilities, R and D programs, and key personnel in countries other than the United States. Additional information on each country's program is available in the International Source Book: Nuclear Fuel Cycle Research and Development, PNL-2478, Rev. 2. The Fact Book is organized as follows: (1) Overview section - summary tables which indicate national involvement in nuclear reactor, fuel cycle, and waste management development activities; (2) national summaries - a section for each country which summarizes nuclear policy, describes organizational relationships and provides addresses, names of key personnel, and facilities information; (3) international agencies - a section for each of the international agencies which has significant fuel cycle involvement; (4) energy supply and demand - summary tables, including nuclear power projections; (5) fuel cycle - summary tables; and (6) travel aids international dialing instructions, international standard time chart, passport and visa requirements, and currency exchange rate.

  2. Standards Development for Solid-State Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Research & Development » Technology Application R&D » Standards Development for Solid-State Lighting Standards Development for Solid-State Lighting To accelerate the development and implementation of needed standards for solid-state lighting products, DOE works closely with a network of standards-setting organizations and offers technical assistance and support. Since 2006, DOE has facilitated ongoing dialogue with key standards development organizations to foster greater coordination

  3. Cooperation on Sustainability Standards | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Cooperation on Sustainability Standards Cooperation on Sustainability Standards Keith Kline, ORNL, presentation at the December 5, 2012, Biomass Program-hosted International webinar on cooperation on sustainability standards. kline_2012_webinar.pdf (4.67 MB) More Documents & Publications 2015 Peer Review Presentations-Sustainability and Strategic Analysis Webinar: Biofuels for the Environment and Communities 2013 Peer Review Presentations-Analysis and Sustainability

  4. International petroleum statistics report

    SciTech Connect (OSTI)

    1997-05-01

    The International Petroleum Statistics Report is a monthly publication that provides current international oil data. This report is published for the use of Members of Congress, Federal agencies, State agencies, industry, and the general public. Publication of this report is in keeping with responsibilities given the Energy Information Administration in Public Law 95-91. The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1995; OECD stocks from 1973 through 1995; and OECD trade from 1985 through 1995.

  5. Renewable Energy and the International Performance Measurement and Verification Protocol

    SciTech Connect (OSTI)

    Walker, A.; Thompson, A.; Mills, D.; Kats, G. H.

    1999-04-14

    The Renewables Subcommittee for the International Performance Measurement and Verification Protocol (IPMVP) is developing a section of the IPMVP treating the special issues related to performance measurement of renewable energy systems. An industry consensus framework for measuring project benefits is important in realizing the promise of renewable energy. This work represents a voluntary, consensus-building process among sponsoring organizations from 21 countries and several disciplines. Measurement and Verification (M&V) can provide a common tool for standardization to support performance-based contracting, financing, and emissions trading. M&V can ensure that savings and generation requirements in energy projects will be achieved accurately and objectively. The protocol defines procedures that are consistently applicable to similar projects, internationally accepted, and reliable. Actual M&V project results can demonstrate success and provide developers, investors, lenders, and customers with more confidence in the value of future projects.

  6. Renewable energy and the International Performance Measurement and Verification Protocol

    SciTech Connect (OSTI)

    Walker, A.; Thompson, A.; Mills, D.; Kats, G.H.

    1999-07-01

    The Renewables Subcommittee for the International Performance Measurement and Verification Protocol (IPMVP) is developing a section of the IPMVP treating the special issues related to performance measurement of renewable energy systems. An industry consensus framework for measuring project benefits is important in realizing the promise of renewable energy. This work represents a voluntary, consensus-building process among sponsoring organizations from 21 countries and several disciplines. Measurement and Verification (M and V) can provide a common tool for standardization to support performance-based contracting, financing, and emissions trading. M and V can ensure that savings and generation requirements in energy projects will be achieved accurately and objectively. The protocol defines procedures that are consistently applicable to similar projects, internationally accepted, and reliable. Actual M and V project results can demonstrate success and provide developers, investors, lenders, and customers with more confidence in the value of future projects.

  7. Organically bound tritium analysis in environmental samples

    SciTech Connect (OSTI)

    Baglan, N.; Cossonnet, C.; Fournier, M.; Momoshima, N.; Ansoborlo, E.

    2015-03-15

    Organically bound tritium (OBT) has become of increased interest within the last decade, with a focus on its behaviour and also its analysis, which are important to assess tritium distribution in the environment. In contrast, there are no certified reference materials and no standard analytical method through the international organization related to OBT. In order to resolve this issue, an OBT international working group was created in May 2012. Over 20 labs from around the world participated and submitted their results for the first intercomparison exercise results on potato (Sep 2013). The samples, specially-prepared potatoes, were provided in March 2013 to each participant. Technical information and results from this first exercise are discussed here for all the labs which have realised the five replicates necessary to allow a reliable statistical treatment. The results are encouraging as the increased number of participating labs did not degrade the observed dispersion of the results for a similar activity level. Therefore, the results do not seem to depend on the analytical procedure used. From this work an optimised procedure can start to be developed to deal with OBT analysis and will guide subsequent planned OBT trials by the international group.

  8. International petroleum statistics report

    SciTech Connect (OSTI)

    1998-01-01

    This monthly publication provides international oil data for January 1998. The report presents data on oil production, demand, imports, and stocks in four sections. Section 1 containes time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. section 3 presents data on oil imports by OECD countries. Section 4 containes annual time series data on world oil production and oil stocks, demand, and trade in OECD countries.

  9. Anthony International: Proposed Penalty (2013-CE-5357)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Anthony International failed to certify a variety of walk-in cooler or freezer components as compliant with the applicable energy conservation standards.

  10. Volume International: Proposed Penalty (2014-CE-32014)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Volume International Corporation failed to certify a variety of ceiling fans as compliant with the applicable energy conservation standards.

  11. International Refrigeration: Proposed Penalty (2012-CE-1510)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that International Refrigeration Products failed to certify a various room air conditioners as compliant with the applicable energy conservation standards.

  12. Technical Review of Law Enforcement Standards and Guides Relative to Incident Management

    SciTech Connect (OSTI)

    Stenner, Robert D.; Salter, R.; Stanton, J. R.; Fisher, D.

    2009-03-24

    In an effort to locate potential law enforcement-related standards that support incident management, a team from the Pacific Northwest National Laboratory (PNNL) contacted representatives from the National Institute of Standards-Office of Law Enforcement Standards (NIST-OLES), National Institute of Justice (NIJ), Federal Bureau of Investigation (FBI), Secret Service, ASTM International committees that have a law enforcement focus, and a variety of individuals from local and regional law enforcement organizations. Discussions were held with various state and local law enforcement organizations. The NIJ has published several specific equipment-related law enforcement standards that were included in the review, but it appears that law enforcement program and process-type standards are developed principally by organizations that operate at the state and local level. Input is provided from state regulations and codes and from external non-government organizations (NGOs) that provide national standards. The standards that are adopted from external organizations or developed independently by state authorities are available for use by local law enforcement agencies on a voluntary basis. The extent to which they are used depends on the respective jurisdictions involved. In some instances, use of state and local disseminated standards is mandatory, but in most cases, use is voluntary. Usually, the extent to which these standards are used appears to depend on whether or not jurisdictions receive certification from a “governing” entity due to their use and compliance with the standards. In some cases, these certification-based standards are used in principal but without certification or other compliance monitoring. In general, these standards appear to be routinely used for qualification, selection for employment, and training. In these standards, the term “Peace Officer” is frequently used to refer to law enforcement personnel. This technical review of national law

  13. ISO standardization of scaling factor method for low and intermediate level radioactive wastes generated at nuclear power plants

    SciTech Connect (OSTI)

    Kashiwagi, Makoto; Masui, Hideki; Denda, Yasutaka; James, David; Lantes, Bertrand; Mueller, Wolfgang; Garamszeghy, Mike; Leganes, Jose Luis; Maxeiner, Harald; Van Velzen, Leo

    2007-07-01

    Low- and intermediate-level radioactive wastes (L-ILW ) generated at nuclear power plants are disposed of in various countries. In the disposal of such wastes, it is required that the radioactivity concentrations of waste packages should be declared with respect to difficult-to-measure nuclides (DTM nuclides), such as C-14, Ni-63 and a-emitting nuclides, which are often limited to maximum values in disposal licenses, safety cases and/or regulations for maximum radioactive concentrations. To fulfill this requirement, the Scaling Factor method (SF method) has been applied in various countries as a principal method for determining the concentrations of DTM nuclides. In the SF method, the concentrations of DTM nuclides are determined by multiplying the concentrations of certain key nuclides by SF values (the determined ratios of radioactive concentration between DTM nuclides and those key nuclides). The SF values used as conversion factors are determined from the correlation between DTM nuclides and key nuclides such as Co-60. The concentrations of key nuclides are determined by {gamma} ray measurements which can be made comparatively easily from outside the waste package. The SF values are calculated based on the data obtained from the radiochemical analysis of waste samples. The use of SFs, which are empirically based on analytical data, has become established as a widely recognized 'de facto standard'. A number of countries have independently collected nuclide data by analysis over many years and each has developed its own SF method, but all the SF methods that have been adopted are similar. The project team for standardization had been organized for establishing this SF method as a 'de jure standard' in the international standardization system of the International Organization for Standardization (ISO). The project team for standardization has advanced the standardization through technical studies, based upon each country's study results and analysis data. The

  14. OLED devices with internal outcoupling

    DOE Patents [OSTI]

    Liu, Jie Jerry; Sista, Srinivas Prasad; Shi, Xiaolei; Zhao, Ri-An; Chichak, Kelly Scott; Youmans, Jeffrey Michael; Janora, Kevin Henry; Turner, Larry Gene

    2015-03-03

    Optoelectronic devices that have enhanced internal outcoupling are disclosed. The devices include a substrate, an anode, a cathode, an electroluminescent layer, and a hole injecting layer. The hole injecting layer includes inorganic nanoparticles that have a bimodal particle size distribution and which are dispersed in an organic matrix.

  15. EZ-Flo International: Proposed Penalty (2010-CW-1401)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that EZ-Flo International, Inc. failed to certify its showerheads as compliant with the applicable water conservation standards.

  16. REGISTERING A TECHNICAL STANDARD PROJECT | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    REGISTERING A TECHNICAL STANDARD PROJECT REGISTERING A TECHNICAL STANDARD PROJECT Purpose This procedure outlines the process for registering a project to develop a DOE Technical Standard, to perform certain periodic updates (revisions, reaffirmations, inactivations for new design, and reinstatements) to DOE Technical Standards, or to register a person's or organization's intent to work with a non-Government standards body to prepare or revise a non-Government standard. The procedure also

  17. DOE Safety, Codes, and Standards Activities | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Safety, Codes & Standards » DOE Safety, Codes, and Standards Activities DOE Safety, Codes, and Standards Activities DOE's safety R&D activities are aimed at developing sensors to detect hydrogen leaks in hydrogen and fuel cell systems. DOE's codes and standards activities are focused on coordinating and accelerating the efforts of major standards and model code development organizations and regulatory agencies so the required standards, codes, and regulations for hydrogen technologies

  18. International petroleum statistics report

    SciTech Connect (OSTI)

    1997-07-01

    The International Petroleum Statistics Report is a monthly publication that provides current international data. The report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent 12 months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1996; OECD stocks from 1973 through 1996; and OECD trade from 1986 through 1996.

  19. Organizations and Networks | Open Energy Information

    Open Energy Info (EERE)

    Network (CLEAN) CLEAN aims to improve communication and coordination by bringing together national and international organizations that are assisting developing countries with...

  20. Electric Vehicle Communication Standards Testing and Validation Phase I: SAE J2847/1

    SciTech Connect (OSTI)

    Pratt, Richard M.; Tuffner, Francis K.; Gowri, Krishnan

    2011-09-21

    Executive Summary Vehicle to grid communication standards are critical to the charge management and interoperability among vehicles, charging stations and utility providers. Several standards initiatives by the Society of Automobile Engineers (SAE), International Standards Organization and International Electrotechnical Commission (ISO/IEC), and ZigBee / HomePlug Alliance are developing requirements for communication messages and protocols. While the standard development is in progress for more than two years, no definitive guidelines are available for the automobile manufacturers, charging station manufacturers and utility backhaul network systems. At present, there is a wide range of proprietary communication options developed and supported in the industry. Recent work by the Electric Power Research Institute (EPRI) in collaboration with SAE and automobile manufacturers has identified performance requirements and test plan based on possible communication pathways using power line communication over the control pilot and mains. Though the communication pathways and power line communication technology options are identified, much work needs to be done in developing application software and testing of communication modules before these can be deployed in production vehicles. This report presents a test plan and results from initial testing of two power line communication modules developed to meet the requirements of SAE J2847/1 standard.

  1. Jefferson Lab Organization

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Organization 5/3/2016 1 Director H. Montgomery Accelerator Science Advisory Comm. Nuclear Physics Program Adv. Comm. University Relations JSA Board of Directors Chair Laboratory Operations JSA Finance & Audit Committee Internal Audit Laboratory Programs Laboratory Planning Deputy Director Science & Tech R. McKeown Chief Operating Officer M. Maier Chief Planning Officer A. Lung

  2. Regional Standards Enforcement

    Broader source: Energy.gov [DOE]

    Central air conditioners are now subject to a base national standard in the North and different, regional standards in the Southeast and Southwest. This page provides information about those standards and how DOE enforces them.

  3. Energy Efficiency Product Standards

    Broader source: Energy.gov [DOE]

    New Jersey Energy Efficiency Product Standards, enacted in 2005, include minimum standards for eight products, which were preempted by the federal Energy Policy Act of 2005. Future standards, if...

  4. IHS Standards Expert

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Standards » IHS IHS Standards Expert 1354608000000 IHS Standards Expert Los Alamos researchers can access IHS Standards from offsite via Remote Access. / / No / Question? 667-5809 library@lanl.gov IHS Standards Expert Los Alamos researchers can access IHS Standards from offsite via Remote Access. Login For each collection (society), one person may access pdfs at a time, per the Library's subscription license. Please free up the collection for another user when finished: download or print your

  5. Energy Efficiency Resource Standard

    Broader source: Energy.gov [DOE]

    Washington voters passed Initiative 937 in 2006, creating a renewable energy standard and an energy efficiency resource standard for the state's electric utilities. Initiative 937, enacted as th...

  6. April 2008 Standards Actions

    Broader source: Energy.gov (indexed) [DOE]

    Visit the Technical Standards Program Web Site at http:www.hss.energy.govnuclear ... Standards Program (TSP) web page at http:hss.energy.govnuclear safetytechstds. ...

  7. EM International Collaboration and Cooperation Project Information

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    EM International Collaboration and Cooperation Project Information [Title of project] [Fiscal Year] Revision [#] [Submittal Date] Collaborators International Collaborator Country: [Proper Sovereign Nation Name] Foreign Organization: [Proper Organization Name] Lead Principal Investigator: [Name] [E-mail] [Phone] US Collaborators EM-HQ Mission Unit: [DAS and OD] EM Field/Project Office: [Site/Project Name] EM-HQ Sponsor: [Name] [Title/Position] [E-mail] [Phone] EM-Field POC: [Name]

  8. Proficiency Testing as a tool to monitor consistency of measurements in the IAEA/WHO Network of Secondary Standards Dosimetry Laboratories

    SciTech Connect (OSTI)

    Meghzifene, Ahmed; Czap, Ladislav; Shortt, Ken

    2008-08-14

    The International Atomic Energy Agency (IAEA) and the World Health Organization (WHO) established a Network of Secondary Standards Dosimetry Laboratories (IAEA/WHO SSDL Network) in 1976. Through SSDLs designated by Member States, the Network provides a direct link of national dosimetry standards to the international measurement system of standards traceable to the Bureau International des Poids et Mesures (BIPM). Within this structure and through the proper calibration of field instruments, the SSDLs disseminate S.I. quantities and units.To ensure that the services provided by SSDL members to end-users follow internationally accepted standards, the IAEA has set up two different comparison programmes. One programme relies on the IAEA/WHO postal TLD service and the other uses comparisons of calibrated ionization chambers to help the SSDLs verify the integrity of their national standards and the procedures used for the transfer of the standards to the end-users. The IAEA comparisons include {sup 60}Co air kerma (N{sub K}) and absorbed dose to water (N{sub D,W}) coefficients. The results of the comparisons are confidential and are communicated only to the participants. This is to encourage participation of the laboratories and their full cooperation in the reconciliation of any discrepancy.This work describes the results of the IAEA programme comparing calibration coefficients for radiotherapy dosimetry, using ionization chambers. In this programme, ionization chambers that belong to the SSDLs are calibrated sequentially at the SSDL, at the IAEA, and again at the SSDL. As part of its own quality assurance programme, the IAEA has participated in several regional comparisons organized by Regional Metrology Organizations.The results of the IAEA comparison programme show that the majority of SSDLs are capable of providing calibrations that fall inside the acceptance level of 1.5% compared to the IAEA.

  9. Final Report - Streamlined and Standardized Permitting and Interconnec...

    Broader source: Energy.gov (indexed) [DOE]

    The plan to transform the rooftop photovoltaic (PV) market in Puerto Rico strives to create not only a standardized framework for PV deployment, but also streamlined and organized, ...

  10. Update to M&O Contractor Model Subcontract entitled "Standard...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    M&O Contractor Model Subcontract entitled "Standard Research Subcontract (Educational Institution or Nonprofit Organization)" Update to M&O Contractor Model Subcontract entitled ...

  11. REDD+ Social and Environmental Standards | Open Energy Information

    Open Energy Info (EERE)

    TOOL Name: REDD+ Social and Environmental Standards AgencyCompany Organization: The Nature Conservancy, The Rainforest Alliance, Wildlife Conservation Society, Conservation...

  12. Building International Emergency Management Systems | National Nuclear

    National Nuclear Security Administration (NNSA)

    Security Administration | (NNSA) Building International Emergency Management Systems NNSA helps nations develop the core elements of an emergency response program. Based on preliminary discussions with counterparts, NNSA develops emergency management programs with partner nations to exchange views and enhance development of effective emergency management systems. Generally, NNSA will assist foreign governments and international organizations with integration of emergency-program core

  13. International Workshop on Linear Colliders 2010

    ScienceCinema (OSTI)

    None

    2011-10-06

    IWLC2010 International Workshop on Linear Colliders 2010ECFA-CLIC-ILC joint meeting: Monday 18 October - Friday 22 October 2010Venue: CERN and CICG (International Conference Centre Geneva, Switzerland)This year, the International Workshop on Linear Colliders organized by the European Committee for Future Accelerators (ECFA) will study the physics, detectors and accelerator complex of a linear collider covering both CLIC and ILC options.Contact Workshop SecretariatIWLC2010 is hostedby CERN

  14. International Workshop on Linear Colliders 2010

    ScienceCinema (OSTI)

    None

    2011-10-06

    IWLC2010 International Workshop on Linear Colliders 2010ECFA-CLIC-ILC joint meeting: Monday 18 October - Friday 22 October 2010Venue: CERN and CICG (International Conference Centre Geneva, Switzerland) This year, the International Workshop on Linear Colliders organized by the European Committee for Future Accelerators (ECFA) will study the physics, detectors and accelerator complex of a linear collider covering both CLIC and ILC options.Contact Workshop Secretariat  IWLC2010 is hosted by CERN

  15. Organizing Committee

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Organizing Committee Organizing Committee R. Todd Anderson Program Manager, BER Climate and Environmental Sciences Anjuli Barnzai Program Manager, BER Climate and Environmental...

  16. Control Techtronics International

    SciTech Connect (OSTI)

    West, J.

    1995-12-31

    Polish graded coal can be burned in existing stoker boilers and meet the 1998 Air Quality standard. This is accomplished with the Control Techtronics microprocessor-based combustion controller accurately and repeatedly: (a) matching the combustion air to the coal firing rate, with continuous stack sensor feedback; (b) continuously varying the boiler`s firing rate based on output water temperature or steam pressure; (c) continuously varying the exhaust fan`s speed to maintain minimum negative pressure in the boiler`s combustion chamber; and recirculating a portion of the flue gas, at varying amounts throughout the boiler`s firing rate. Systems for five boilers have been installed and are operating on MPEC`s Balicka plant in Krakow. Control Techtronics International has $10 million of U.S. Export-Import Bank funds available for similar projects throughout Poland.

  17. International Council on Clean Transportation | Open Energy Informatio...

    Open Energy Info (EERE)

    Slower Growth Ahead? ... further results Find Another Tool FIND TRANSPORTATION TOOLS The International Council on Clean Transportation is an independent nonprofit organization...

  18. International Solar Energy Society ISES | Open Energy Information

    Open Energy Info (EERE)

    Society ISES Jump to: navigation, search Name: International Solar Energy Society (ISES) Place: Freiburg, Germany Product: ISES is a non-governmental organization accredited by the...

  19. Technical Standards Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2011-02-23

    The Order promotes DOE's use of Voluntary Consensus Standards (VCS) as the primary method for application of technical standards and establishes and manages the DOE Technical Standards Program (TSP) including technical standards development, information, activities, issues, and interactions. Admin Chg 1 dated 3-12-13.

  20. Technical Standards Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1999-11-19

    The Technical Standards Program (TSP) promotes the use of voluntary consensus standards by the Department of Energy (DOE), provides DOE with the means to develop needed technical standards, and manages overall technical standards information, activities, issues, and interactions. Cancels DOE O 1300.2A. Canceled by DOE O 252.1A

  1. Control Systems Cyber Security Standards Support Activities

    SciTech Connect (OSTI)

    Robert Evans

    2009-01-01

    The Department of Homeland Security’s Control Systems Security Program (CSSP) is working with industry to secure critical infrastructure sectors from cyber intrusions that could compromise control systems. This document describes CSSP’s current activities with industry organizations in developing cyber security standards for control systems. In addition, it summarizes the standards work being conducted by organizations within the sector and provides a brief listing of sector meetings and conferences that might be of interest for each sector. Control systems cyber security standards are part of a rapidly changing environment. The participation of CSSP in the development effort for these standards has provided consistency in the technical content of the standards while ensuring that information developed by CSSP is included.

  2. NETL Focused Standards List

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1/6/14 Contact: Janet Lambert Reviewed: 3/5/14 Page 1 of 17 The National Energy Technology Laboratory (NETL) Focused Standards List is primarily derived from standard references contained in the requirements section of NETL's environment, safety, security, and health (ESS&H) and cyber security directives. All standards shall reference the most current edition/version of that standard. 1. DEPARTMENT OF ENERGY (DOE) AND OTHER GOVERNMENT STANDARDS AND REQUIREMENTS a. DOE Directives The

  3. Organic containment separator

    DOE Patents [OSTI]

    Del Mar, Peter

    1995-01-01

    A process of sample preparation prior to analysis for the concentration of an organic contaminant in an aqueous medium by (a) passing an initial aqueous medium including a minor amount of the organic contaminant through a composite tube including a polymeric base material selected from the group of polyolefins and polyfluorocarbons and particles of a carbon allotrope material adfixed to the inner wall of the polymeric base material, the composite tube having an internal diameter of from about 0.1 to about 2.0 millimeters and being of sufficient length to permit the organic contaminant to adhere to the composite tube, (b) passing a solvent through the composite tube, said solvent capable of separating the adhered organic contaminant from the composite tube. Further, an extraction apparatus for sample preparation prior to analysis for the concentration of an organic contaminant in an aqueous medium, said apparatus including a composite tube including a polymeric base material selected from the group of polyolefins and polyfluorocarbons and particles of a carbon allotrope material adfixed to the inner wall of the polymeric base material, the composite tube having an internal diameter of from about 0.1 to about 2.0 millimeters and being of sufficient length to permit an organic contaminant contained within an aqueous medium passed therethrough to adhere to the composite tube is disclosed.

  4. Organic contaminant separator

    DOE Patents [OSTI]

    Mar, Peter D.

    1994-01-01

    A process of sample preparation prior to analysis for the concentration of an organic contaminant in an aqueous medium by (a) passing an initial aqueous medium including a minor amount of the organic contaminant through a composite tube including a polymeric base material selected from the group of polyolefins and polyfluorocarbons and particles of a carbon allotrope material adfixed to the inner wall of the polymeric base material, the composite tube having an internal diameter of from about 0.1 to about 2.0 millimeters and being of sufficient length to permit the organic contaminant to adhere to the composite tube, (b) passing a solvent through the composite tube, said solvent capable of separating the adhered organic contaminant from the composite tube. Further, an extraction apparatus for sample preparation prior to analysis for the concentration of an organic contaminant in an aqueous medium, said apparatus including a composite tube including a polymeric base material selected from the group of polyolefins and polyfluorocarbons and particles of a carbon allotrope material adfixed to the inner wall of the polymeric base material, the composite tube having an internal diameter of from about 0.1 to about 2.0 millimeters and being of sufficient length to permit an organic contaminant contained within an aqueous medium passed therethrough to adhere to the composite tube is disclosed.

  5. Organic contaminant separator

    DOE Patents [OSTI]

    Del Mar, Peter

    1993-01-01

    A process of sample preparation prior to analysis for the concentration of an organic contaminant in an aqueous medium by (a) passing an initial aqueous medium including a minor amount of the organic contaminant through a composite tube comprised of a blend of a polyolefin and a polyester, the composite tube having an internal diameter of from about 0.1 to about 2.0 millimeters and being of sufficient length to permit the organic contaminant to adhere to the composite tube, (b) passing a solvent through the composite tube, said solvent capable of separating the adhered organic contaminant from the composite tube. Further, an extraction apparatus for sample preparation prior to analysis for the concentration of an organic contaminant in an aqueous medium, said apparatus including a composite tube comprised of a blend of a polyolefin and a polyester, the composite tube having an internal diameter of from about 0.1 to about 2.0 millimeters and being of sufficient length to permit an organic contaminant contained within an aqueous medium passed therethrough to adhere to the composite tube is disclosed.

  6. Organic contaminant separator

    DOE Patents [OSTI]

    Del Mar, Peter

    1995-01-01

    A process of sample preparation prior to analysis for the concentration of an organic contaminant in an aqueous medium by (a) passing an initial aqueous medium including a minor amount of the organic contaminant through a composite tube comprised of a blend of a polyolefin and a polyester, the composite tube having an internal diameter of from about 0.1 to about 2.0 millimeters and being of sufficient length to permit the organic contaminant to adhere to the composite tube, (b) passing a solvent through the composite tube, said solvent capable of separating the adhered organic contaminant from the composite tube. Further, an extraction apparatus for sample preparation prior to analysis for the concentration of an organic contaminant in an aqueous medium, said apparatus including a composite tube comprised of a blend of a polyolefin and a polyester, the composite tube having an internal diameter of from about 0.1 to about 2.0 millimeters and being of sufficient length to permit an organic contaminant contained within an aqueous medium passed therethrough to adhere to the composite tube is disclosed.

  7. Organic contaminant separator

    DOE Patents [OSTI]

    Del Mar, P.

    1993-12-28

    A process is presented of sample preparation prior to analysis for the concentration of an organic contaminant in an aqueous medium by (a) passing an initial aqueous medium including a minor amount of the organic contaminant through a composite tube comprised of a blend of a polyolefin and a polyester, the composite tube having an internal diameter of from about 0.1 to about 2.0 millimeters and being of sufficient length to permit the organic contaminant to adhere to the composite tube, (b) passing a solvent through the composite tube. The solvent is capable of separating the adhered organic contaminant from the composite tube. Further, an extraction apparatus is presented for sample preparation prior to analysis for the concentration of an organic contaminant in an aqueous medium. The apparatus includes a composite tube comprised of a blend of a polyolefin and a polyester. The composite tube has an internal diameter of from about 0.1 to about 2.0 millimeters and has sufficient length to permit an organic contaminant contained within an aqueous medium passed therethrough to adhere to the composite tube. 2 figures.

  8. International District Energy Association

    Broader source: Energy.gov [DOE]

    Since its formation in 1909, the International District Energy Association (IDEA) has served as a principal industry advocate and management resource for owners, operators, developers, and suppliers of district heating and cooling systems in cities, campuses, bases, and healthcare facilities. Today, with over 1,400 members in 26 countries, IDEA continues to organize high-quality technical conferences that inform, connect, and advance the industry toward higher energy efficiency and lower carbon emissions through innovation and investment in scalable sustainable solutions. With the support of DOE, IDEA performs industry research and market analysis to foster high impact projects and help transform the U.S. energy industry. IDEA was an active participant in the original Vision and Roadmap process and has continued to partner with DOE on combined heat and power (CHP) efforts across the country.

  9. International petroleum statistics report

    SciTech Connect (OSTI)

    1996-10-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. Word oil production and OECD demand data are for the years 1970 through 1995; OECD stocks from 1973 through 1995; and OECD trade from 1985 through 1995.

  10. International petroleum statistics report

    SciTech Connect (OSTI)

    1995-11-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, exports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1994; OECD stocks from 1973 through 1994; and OECD trade from 1984 through 1994.

  11. International petroleum statistics report

    SciTech Connect (OSTI)

    1995-07-27

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, and exports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1994; OECD stocks from 1973 through 1994; and OECD trade from 1984 through 1994.

  12. International petroleum statistics report

    SciTech Connect (OSTI)

    1996-05-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, exports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1995; OECD stocks from 1973 through 1995; and OECD trade from 1084 through 1994.

  13. DOE-TSPP-5-2013, Coordination of Technical Standards

    Broader source: Energy.gov [DOE]

    This procedure provides guidance on the formal coordination of the Department of Energy (DOE) Technical Standards in the DOE Technical Standards Program (TSP). The purpose of coordination of draft DOE Technical Standards is to solicit and receive comments from interested persons and organizations in order to improve and correct DOE Technical Standards. DOE Technical Standards are coordinated through the electronic TSP RevCom process.

  14. International waste management fact book

    SciTech Connect (OSTI)

    Amaya, J P; LaMarche, M N; Upton, J F

    1997-10-01

    Many countries around the world are faced with nuclear and environmental management problems similar to those being addressed by the US Department of Energy. The purpose of this Fact Book is to provide the latest information on US and international organizations, programs, activities and key personnel to promote mutual cooperation to solve these problems. Areas addressed include all aspects of closing the commercial and nuclear fuel cycle and managing the wastes and sites from defense-related, nuclear materials production programs.

  15. Federal Appliance Standards

    Office of Energy Efficiency and Renewable Energy (EERE)

    Note: HR 6582 of 2012 made some modifications to the efficiency standards previously adopted for some appliance types. The bill did not adopt new standards for previously unregulated appliances,...

  16. August 2006 Standards Actions

    Energy Savers [EERE]

    Visit the Technical Standards Program Web Site at http:www.eh.doe.gov techstds ... on the Technical Standards Program (TSP) web page at http:www.eh.doe.govtechstds. ...

  17. February 2007 Standards Actions

    Energy Savers [EERE]

    Visit the Technical Standards Program Web Site at http:www.eh.doe.gov techstds ... on the Technical Standards Program (TSP) web page at http:www.eh.doe.govtechstds. ...

  18. Standard Form 120

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 OF STANDARD FORM 120 REV. APRIL 1957 GEN. SERV. ADMIN. FPMR (41 CFR) 101-43.311 ... NUMBER FAIR % ITEM DESCRIPTION PER UNIT TOTAL NO. (a) (b) (f) (g) STANDARD FORM 120 REV. ...

  19. Energy Efficiency Portfolio Standard

    Broader source: Energy.gov [DOE]

    On December 2015, the NY PSC issued an order extending the Energy Efficiency Portfolio Standard (EEPS) and Customer-Sited Tier (CST) of the Renewable Portfolio Standard (RPS) till Feb 29, 2016...

  20. Appliance Energy Efficiency Standards

    Broader source: Energy.gov [DOE]

    In 2004 the Energy Efficiency Standards Act (EESA of 2004) became law in the State of Maryland. The General Assembly passed the EESA to establish minimum energy efficiency standards on nine...

  1. DOE-TSPP-4, Registering a Technical Standard Project - July 1...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    to DOE Technical Standards, or to register a person's or organization's intent to work with a non-Government standards body to prepare or revise a non-Government standard. ...

  2. Standards | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Standards Standards FOREWARD This U.S. Department of Energy (DOE) standard supersedes DOE-STD-3020-97 and is approved for use by DOE and its contractors. This standard was developed primarily for application in DOE programs. It provides guidance to DOE contractors for procurement and required testing of High Efficiency Particulate Air (HEPA) filters used in DOE nuclear facilities. Required testing is performed by the filter manufacturer and by DOE at a designated Filter Test Facility (FTF). This

  3. Appliance and Equipment Standards

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Standards April 22, 2014 John Cymbalsky Program Manager 1 | Energy Efficiency and Renewable Energy eere.energy.gov 2 Appliance & Equipment Standards Mission The Appliance and Equipment Standards Program's Mission to Fulfill its Statutory Obligation to: * Develop and amend energy conservation standards that achieve the maximum energy efficiency that is technologically feasible and economically justified. * Develop and amend test procedures that are repeatable, reproducible, representative,

  4. International Commitments Management

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2008-11-18

    This Order establishes a process to manage the Department's International Commitments under the administrative direction of the Office of Policy and International Affairs. No cancellation.

  5. Student Trainee (Engineering)- Intern

    Broader source: Energy.gov [DOE]

    The purpose of the Pathways Intern Employment Program is to provide the intern with exposure to public service, enhance educational experience, and support educational goals. The program is...

  6. Organized for safety

    SciTech Connect (OSTI)

    McCleary, M.D.; Schuberth, P.C.; Hining, D.E.

    1996-11-01

    The Exxon Company, International Drilling Organization (ECIDO) is committed to an injury-free workplace through continuous efforts by identifying and eliminating or managing safety risks associated with drilling activities. The newly developed and recently completed ECIDO Safety Management Program (SMP) strengthens this commitment by defining a comprehensive, management approved, organized framework for drill teams from which operations safety is managed both effectively and consistently worldwide. The SMP is proactive, focuses on positive recognition, promotes greater individual involvement, and gives part ownership of the safety program at the rig level to the crews.

  7. AGEING PROCEDURES ON LITHIUM BATTERIES IN AN INTERNATIONAL COLLABORATION CONTEXT

    SciTech Connect (OSTI)

    Jeffrey R. Belt; Ira Bloom; Mario Conte; Fiorentino Valerio Conte; Kenji Morita; Tomohiko Ikeya; Jens Groot

    2010-11-01

    The widespread introduction of electrically-propelled vehicles is currently part of many political strategies and introduction plans. These new vehicles, ranging from limited (mild) hybrid to plug-in hybrid to fully-battery powered, will rely on a new class of advanced storage batteries, such as those based on lithium, to meet different technical and economical targets. The testing of these batteries to determine the performance and life in the various applications is a time-consuming and costly process that is not yet well developed. There are many examples of parallel testing activities that are poorly coordinated, for example, those in Europe, Japan and the US. These costs and efforts may be better leveraged through international collaboration, such as that possible within the framework of the International Energy Agency. Here, a new effort is under development that will establish standardized, accelerated testing procedures and will allow battery testing organizations to cooperate in the analysis of the resulting data. This paper reviews the present state-of-the-art in accelerated life testing in Europe, Japan and the US. The existing test procedures will be collected, compared and analyzed with the goal of international collaboration.

  8. NETL Focused Standards List

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6/12 Contact: Janet Lambert Reviewed: 10/4/12 Page 1 of 17 This Focused Standards List has been primarily derived from selected standard references contained in NETL issued directives. All standards shall reference the most current edition/ version of that standard. DOE and other Government Standards and Requirements DOE DIRECTIVES Note: The following DOE directives can be found at http://www.directives.doe.gov: DOE Policy 141.1, DOE Management of Cultural Resources DOE Order 142.1, Classified

  9. DOE Approved Technical Standards | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Approved Technical Standards DOE Approved Technical Standards Document ID Filter Document ID sort descending Title Date DOE-HDBK-1028-2009 Human Performance Improvement Handbook Volume 1 of 2 This Human Performance Improvement Handbook is a reference for anyone working in the Department of Energy (DOE) community who wants to learn more about human performance and how it can be improved.The handbook addresses the roles of individuals, leaders, and the organization in improving performance.

  10. Renewable Energy Resources Inc formerly Internal Hydro International...

    Open Energy Info (EERE)

    Inc formerly Internal Hydro International Inc Jump to: navigation, search Name: Renewable Energy Resources Inc (formerly Internal Hydro International Inc) Place: Tampa, Florida...

  11. STEP Intern Job Description

    Broader source: Energy.gov [DOE]

    STEP Intern Job Description, from the Tool Kit Framework: Small Town University Energy Program (STEP).

  12. CSA International Certification Discussion Hydrogen Technology Workshop |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy CSA International Certification Discussion Hydrogen Technology Workshop CSA International Certification Discussion Hydrogen Technology Workshop Slides from the U.S. Department of Energy Hydrogen Component and System Qualification Workshop held November 4, 2010 in Livermore, CA. csqw_gruss.pdf (1.25 MB) More Documents & Publications Fueling Components Testing and Certification Component and System Qualification Workshop Proceedings CODES & STANDARDS FOR THE

  13. DOE technical standards list: Directory of points of contact for the DOE Technical Standards Program

    SciTech Connect (OSTI)

    1998-01-01

    This Department of Energy (DOE) technical standards list (TSL) has been prepared by the Office of Nuclear Safety Policy and Standards (EH-31). This TSL is approved for use by all DOE Components (i.e., all DOE Headquarters and field organizations, management and operating contractors, and laboratories). This TSL supplements DOE manuals, directives, orders, and standards. It provides basic and fundamental information for DOE Component personnel involved in identifying standardization documents. It also provides listings of points of contact within DOE and identifies links to points of contact within the Department of Defense (DoD) for coordination of standardization activities. This TSL will be updated to reflect changes in organizations, addresses, and responsibilities as necessary.

  14. Sandia Contributes to International Electrotechnical Commission IEC

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    61400-26 Availability Standard Contributes to International Electrotechnical Commission IEC 61400-26 Availability Standard - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power &

  15. Open Issues in the Development of Safety Standards for Compressed Hydrogen

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Storage at SAE-International | Department of Energy Issues in the Development of Safety Standards for Compressed Hydrogen Storage at SAE-International Open Issues in the Development of Safety Standards for Compressed Hydrogen Storage at SAE-International These slides were presented at the Onboard Storage Tank Workshop on April 29, 2010. saej2579_standards_ostw.pdf (411.35 KB) More Documents & Publications Test Protocol for Hydrogen Storage Systems in SAE J2579 and GTR Requirements for

  16. The Standard Model

    ScienceCinema (OSTI)

    Lincoln, Don

    2014-08-12

    Fermilab scientist Don Lincoln describes the Standard Model of particle physics, covering both the particles that make up the subatomic realm and the forces that govern them.

  17. Exhibit Standards and Guidelines

    Broader source: Energy.gov [DOE]

    The Office of Energy Efficiency and Renewable Energy (EERE) has standards and guidelines for designing and displaying exhibits for conferences, trade shows, and other events.

  18. Renewable Energy Standard

    Broader source: Energy.gov [DOE]

    In 2007, Minnesota legislation modified the state's 2001 voluntary renewable energy objective to create a mandatory renewable portfolio standard (RPS). Public utilities (i.e., investor-owned...

  19. Renewable Portfolio Standard

    Office of Energy Efficiency and Renewable Energy (EERE)

    Massachusetts' 1997 electric-utility restructuring legislation created the framework for a renewable portfolio standard (RPS). In April 2002, the Massachusetts Department of Energy Resources (DOER)...

  20. Renewable Energy Standard

    Office of Energy Efficiency and Renewable Energy (EERE)

    Note: H.B. 40, enacted in June 2015, created Vermont's Renewable Energy Standard and repeals the Sustainably Priced Energy Enterprise Development program's renewable energy goals. The Renewable...

  1. Renewable Energy Portfolio Standard

    Office of Energy Efficiency and Renewable Energy (EERE)

    Maryland's Renewable Energy Portfolio Standard, enacted in May 2004 and revised numerous times since, requires electricity suppliers (all utilities and competitive retail suppliers) to use renewa...

  2. SSL Standards and Guidelines

    SciTech Connect (OSTI)

    none,

    2012-04-01

    Solid-state lighting program technology fact sheet that reviews the key performance and safety standards applicable to SSL-based lighting products.

  3. Standard Subject Classification System

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1979-08-14

    The order establishes the DOE Standard Subject Classification System for classifying documents and records by subject, including correspondence, directives, and forms.Cancels DOE O 0000.1.

  4. TECHNICAL STANDARDS PROGRAM RESPONSIBILITIES

    Broader source: Energy.gov [DOE]

    PurposeThis procedure describes the responsibilities of persons who are charged with implementing the DOE Technical Standards Program. 

  5. NETL Focused Standards List

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... for Air Conveying of Vapors, Gases, Mists, and Noncombustible Particulate Solids NFPA 99, Health Care Facilities Code NFPA 101, Life Safety Code NFPA 241, Standard for ...

  6. TECHNICAL STANDARDS COMMENT RESOLUTION

    Broader source: Energy.gov [DOE]

    PurposeThis procedure provides guidance for resolving comments on DOE Technical Standards that are received during the coordination process. 

  7. Energy Conservation Standards Activities

    Broader source: Energy.gov (indexed) [DOE]

    Report to Congress August 2014 United States Department of Energy Washington, DC 20585 Energy Conservation Standards Activities Report to Congress | Page i Message from the ...

  8. The Standard Model

    SciTech Connect (OSTI)

    Lincoln, Don

    2012-10-02

    Fermilab scientist Don Lincoln describes the Standard Model of particle physics, covering both the particles that make up the subatomic realm and the forces that govern them.

  9. Appliance Standards Resources

    Office of Energy Efficiency and Renewable Energy (EERE)

    The federal government, and some states, have established minimum efficiency standards for certain appliances and equipment, such as refrigerators and clothes washers.

  10. STANDARD REVIEW PLAN

    Office of Environmental Management (EM)

    of Nuclear Facilities Standard Review Plan Safety Design Strategy January 2015 OFFICE OF ENVIRONMENTAL MANAGEMENT ... safety, environment, security, and quality assurance, ...

  11. Puerto Rico- Interconnection Standards

    Broader source: Energy.gov [DOE]

    Customer-generators seeking to interconnect first submit a standardized "Evaluation Request" to PREPA to determine whether or not the system will qualify for the "Simple Interconnection Process...

  12. Technical Standards Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2011-02-23

    The order establishes the DOE Technical Standards Program. Admin Chg 1, dated 3-12-13 supersedes DOE O 252.1A.

  13. Alternative Energy Portfolio Standard

    Broader source: Energy.gov [DOE]

    NOTE: On February 2016, the PA Public Service Commission (PUC) issued a final rulemaking order amending and clarifying several provisions of PA Alternative Energy Portfolio Standard (AEPS), net...

  14. Lab Organizations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Organizations Lab Organizations National security depends on science and technology. The United States relies on Los Alamos National Laboratory for the best of both. No place on Earth pursues a broader array of world-class scientific endeavors. Los Alamos National Security, LLC Leadership Team Organization Chart PRINCIPAL ASSOCIATE DIRECTORATES Capital Projects, Larry Simmons Global Security, Terry Wallace Operations and Business, Craig Leasure Science, Technology, and Engineering, Alan Bishop

  15. Upcoming Webinar December 16: International Hydrogen Infrastructure

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Challenges NOW, DOE, and NEDO | Department of Energy December 16: International Hydrogen Infrastructure Challenges NOW, DOE, and NEDO Upcoming Webinar December 16: International Hydrogen Infrastructure Challenges NOW, DOE, and NEDO December 12, 2013 - 12:00am Addthis The Energy Department will present a live webinar titled "International Hydrogen Infrastructure Challenges-NOW, DOE, and NEDO" on Monday, December 16, from 8:00 a.m. to 10:00 a.m. Eastern Standard Time. This webinar

  16. WRAITH - A Computer Code for Calculating Internal and External Doses Resulting From An Atmospheric Release of Radioactive Material

    SciTech Connect (OSTI)

    Scherpelz, R. I.; Borst, F. J.; Hoenes, G. R.

    1980-12-01

    WRAITH is a FORTRAN computer code which calculates the doses received by a standard man exposed to an accidental release of radioactive material. The movement of the released material through the atmosphere is calculated using a bivariate straight-line Gaussian distribution model, with Pasquill values for standard deviations. The quantity of material in the released cloud is modified during its transit time to account for radioactive decay and daughter production. External doses due to exposure to the cloud can be calculated using a semi-infinite cloud approximation. In situations where the semi-infinite cloud approximation is not a good one, the external dose can be calculated by a "finite plume" three-dimensional point-kernel numerical integration technique. Internal doses due to acute inhalation are cal.culated using the ICRP Task Group Lung Model and a four-segmented gastro-intestinal tract model. Translocation of the material between body compartments and retention in the body compartments are calculated using multiple exponential retention functions. Internal doses to each organ are calculated as sums of cross-organ doses, with each target organ irradiated by radioactive material in a number of source organs. All doses are calculated in rads, with separate values determined for high-LET and low-LET radiation.

  17. Submitting MIGS, MIMS, MIENS Information to EMBL and Standards and the Sequencing Pipelines of the Gordon and Betty Moore Foundation (GSC8 Meeting)

    ScienceCinema (OSTI)

    Vaughan, Bob [EMBL]; Kaye, Jon [Gordon and Betty Moore Foundation

    2011-04-29

    The Genomic Standards Consortium was formed in September 2005. It is an international, open-membership working body which promotes standardization in the description of genomes and the exchange and integration of genomic data. The 2009 meeting was an activity of a five-year funding "Research Coordination Network" from the National Science Foundation and was organized held at the DOE Joint Genome Institute with organizational support provided by the JGI and by the University of California - San Diego. Bob Vaughan of EMBL on submitting MIGS/MIMS/MIENS information to EMBL-EBI's system, followed by a brief talk from Jon Kaye of the Gordon and Betty Moore Foundation on standards and the foundation's sequencing pipelines at the Genomic Standards Consortium's 8th meeting at the DOE JGI in Walnut Creek, Calif. on Sept. 9, 2009

  18. DOE-TSPP-6, Coordination of DOE Technical Standards- July 1, 2009

    Office of Energy Efficiency and Renewable Energy (EERE)

    This procedure provides guidance on the formal coordination of DOE Technical Standards in the DOE Technical Standards Program (TSP). The purpose of coordination of draft technical standards is to solicit and receive comments from interested persons and organizations in order to improve and correct technical standards. DOE Technical Standards are coordinated through the electronic RevCom for TSP process.

  19. DOE-TSPP-6, Coordination of DOE Technical Standards- July 2004

    Office of Energy Efficiency and Renewable Energy (EERE)

    This procedure provides guidance on the formal coordination of DOE Technical Standards in the DOE Technical Standards Program (TSP). The purpose of coordination of draft technical standards is to solicit and receive comments from interested persons and organizations in order to improve and correct technical standards. DOE Technical Standards are coordinated through the electronic RevCom for TSP process.

  20. A National Set of Hydrogen Codes and Standards for the US (Presentatio...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    National Set of Hydrogen Codes and Standards for the US 3 rd International Conference on ... Ajaccio, France NRELPR-560-46604 National Renewable Energy Laboratory Innovation for Our ...

  1. Terms of Reference for the International Partnership for the Hydrogen

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Economy | Department of Energy Terms of Reference for the International Partnership for the Hydrogen Economy Terms of Reference for the International Partnership for the Hydrogen Economy Updated version (October 31, 2003) of the Terms of Reference for the International Partnership for the Hydrogen Economy, including purpose, functions, organization. rev_terms_ref_iphe.pdf (140.09 KB) More Documents & Publications Non-Paper on Activities and Operations of the IPHE Committees International

  2. International energy outlook 1999

    SciTech Connect (OSTI)

    1999-03-01

    This report presents international energy projections through 2020, prepared by the Energy Information Administration. The outlooks for major energy fuels are discussed, along with electricity, transportation, and environmental issues. The report begins with a review of world trends in energy demand. The historical time frame begins with data from 1970 and extends to 1996, providing readers with a 26-year historical view of energy demand. The IEO99 projections covers a 24-year period. The next part of the report is organized by energy source. Regional consumption projections for oil, natural gas, coal, nuclear power, and renewable energy (hydroelectricity, geothermal, wind, solar, and other renewables) are presented in the five fuel chapters, along with a review of the current status of each fuel on a worldwide basis. The third part of the report looks at energy consumption in the end-use sectors, beginning with a chapter on energy use for electricity generation. New to this year`s outlook are chapters on energy use in the transportation sector and on environmental issues related to energy consumption. 104 figs., 87 tabs.

  3. Global residential appliance standards

    SciTech Connect (OSTI)

    Turiel, I.; McMahon, J.E.; Lebot, B.

    1993-03-01

    In most countries, residential electricity consumption typically ranges from 20% to 40% of total electricity consumption. This energy is used for heating, cooling, refrigeration and other end-uses. Significant energy savings are possible if new appliance purchases are for models with higher efficiency than that of existing models. There are several ways to ensure or encourage such an outcome, for example, appliance rebates, innovative procurement, and minimum efficiency standards. This paper focuses on the latter approach. At the present time, the US is the only country with comprehensive appliance energy efficiency standards. However, many other countries, such as Australia, Canada, the European Community (EC), Japan and Korea, are considering enacting standards. The greatest potential impact of minimum efficiency standards for appliances is in the developing countries (e.g., China and India), where saturations of household appliances are relatively low but growing rapidly. This paper discusses the potential savings that could be achieved from global appliance efficiency standards for refrigerators and freezers. It also could be achieved from global appliance efficiency standards for refrigerators and freezers. It also discusses the impediments to establishing common standards for certain appliance types, such as differing test procedures, characteristics, and fuel prices. A methodology for establishing global efficiency standards for refrigerators and freezers is described.

  4. International HVAC&R R&D Collaboration | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    International HVAC&R R&D Collaboration International HVAC&R R&D Collaboration Tony Bouza, chair of the International Organizing Committee for the 11th IEA Heat Pump Conference, delivers the welcoming address in Montreal. (2014) Tony Bouza, chair of the International Organizing Committee for the 11th IEA Heat Pump Conference, delivers the welcoming address in Montreal. (2014) Lead Performer: Oak Ridge National Laboratory - Oak Ridge, TN Partners: -- International Energy Agency -

  5. Organizing Committee

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Organizing Committee Organizing Committee Large Scale Computing and Storage Requirements for Nuclear Physics May 26-27, 2011 Ted Barnes DOE Office of Nuclear Physics Yukiko Sekine NERSC Program Manager, DOE Office of Advanced Computational Research Kathy Yelick NERSC Director Richard Gerber NERSC User Services Harvey Wasserman NERSC User Services Last edited: 2016-04-29 11:35:21

  6. Standard Agent Framework 1

    Energy Science and Technology Software Center (OSTI)

    1999-04-06

    The Standard Agent framework provides an extensible object-oriented development environment suitable for use in both research and applications projects. The SAF provides a means for constructing and customizing multi-agent systems through specialization of standard base classes (architecture-driven framework) and by composition of component classes (data driven framework). The standard agent system is implemented as an extensible object-centerd framework. Four concrete base classes are developed: (1) Standard Agency; (2) Standard Agent; (3) Human Factor, and (4)more » Resources. The object-centered framework developed and utilized provides the best comprimise between generality and flexibility available in agent development systems today.« less

  7. Fermilab | About | Organization | Fermilab Organization | Explanation...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of Symbols Line Organization: sectors, divisions, sections Line Organization Matrix Organization: centers, projects and programs utilizing resources spanning the entire...

  8. Department of Energy Standards Index

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... NFPA 97 Standard Glossary of Terms Relating to Chimney, Vents, Heat Producing Appliances NFPA 99 Standard for Health Care Facilities NFPA 99B Standard for Hypobaric Facilities NFPA ...

  9. Standard Terms and Conditions | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Standard Terms and Conditions Documents related to NREL's standard terms and conditions for subcontracts or purchase orders are available below. Standard Terms and Conditions - ...

  10. DOE-TSPP-4-2013, Developing DOE Technical Standards | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    -2013, Developing DOE Technical Standards DOE-TSPP-4-2013, Developing DOE Technical Standards Technical Standards Program Procedures (TSPP) - September 16, 2013 This procedure provides guidance for developing the Department of Energy (DOE) Technical Standards. NOTE: Development of a Voluntary Consensus Standard (VCS) for DOE's use will follow the rules of the Standards Developing Organization (SDO). The DOE representative to the standards-writing activity represents the Department's interests

  11. Technical Standards,DOE Standards and Corresponding Directives Crosswalk -

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    February 2, 2002 | Department of Energy DOE Standards and Corresponding Directives Crosswalk - February 2, 2002 Technical Standards,DOE Standards and Corresponding Directives Crosswalk - February 2, 2002 February 2, 2002 DOE Standards and Corresponding Directives Crosswalk DOE Standards and Corresponding Directives Crosswalk table Technical Standards,DOE Standards and Corresponding Directives Crosswalk (72.08 KB) More Documents & Publications Technical Standards, DOE Orders and

  12. Organization | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    About Us » Organization Organization Organization OCIO Organizational Chart (Printable) News & Blog CIO Leadership Organization Contact Us

  13. International Energy Statistics - EIA

    Gasoline and Diesel Fuel Update (EIA)

    International > International Energy Statistics International Energy Statistics Petroleum Production | Annual Monthly/Quarterly Consumption | Annual Monthly/Quarterly Capacity | Bunker Fuels | Stocks | Annual Monthly/Quarterly Reserves | Imports | Annual Monthly/Quarterly Exports | CO2 Emissions | Heat Content Natural Gas All Flows | Production | Consumption | Reserves | Imports | Exports | Carbon Dioxide Emissions | Heat Content Coal All Flows | Production | Consumption | Reserves | Imports

  14. NREL Helps Establish New PV Quality Standards for Manufacturers - News

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Releases | NREL Helps Establish New PV Quality Standards for Manufacturers February 8, 2016 Working with partners around the world, researchers at the U.S. Department of Energy's National Renewable Energy Laboratory (NREL) have completed five years of work toward helping establish an international quality standard for manufacturing photovoltaic (PV) modules. PV manufacturers will use the new standard to increase the level of confidence investors, utilities, and consumers have in solar panel

  15. DOE Announces Changes to the Energy Conservation Standards Process |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Changes to the Energy Conservation Standards Process DOE Announces Changes to the Energy Conservation Standards Process November 16, 2010 - 7:18pm Addthis The Department of Energy today announced it is making changes to expedite its rulemaking process. Historically, the Department has had difficulty meeting deadlines imposed by Congress for adopting energy efficiency standards. The Department has already taken steps to improve its internal management of the rulemaking

  16. CODES & STANDARDS FOR THE HYDROGEN ECONOMY | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CODES & STANDARDS FOR THE HYDROGEN ECONOMY CODES & STANDARDS FOR THE HYDROGEN ECONOMY 2009 DOE Hydrogen Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting, May 18-22, 2009 -- Washington D.C. scsp_01_nakarado.pdf (806.45 KB) More Documents & Publications CSA International Certification Discussion Hydrogen Technology Workshop Fueling Components Testing and Certification US DRIVE Hydrogen Codes and Standards Technical Team Roadmap

  17. Chemical Processing Qualification Standard

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    6-2010 February 2010 DOE STANDARD CHEMICAL PROCESSING QUALIFICATION STANDARD DOE Defense Nuclear Facilities Technical Personnel U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. DOE-STD-1176-2010 ii This document is available on the Department of Energy Technical Standards Program Web Site at http://www.hss.energy.gov/nuclearsafety/ns/techstds DOE-STD-1176-2010 iv INTENTIONALLY BLANK DOE-STD-1176-2010 v

  18. Sonication standard laboratory module

    DOE Patents [OSTI]

    Beugelsdijk, Tony; Hollen, Robert M.; Erkkila, Tracy H.; Bronisz, Lawrence E.; Roybal, Jeffrey E.; Clark, Michael Leon

    1999-01-01

    A standard laboratory module for automatically producing a solution of cominants from a soil sample. A sonication tip agitates a solution containing the soil sample in a beaker while a stepper motor rotates the sample. An aspirator tube, connected to a vacuum, draws the upper layer of solution from the beaker through a filter and into another beaker. This beaker can thereafter be removed for analysis of the solution. The standard laboratory module encloses an embedded controller providing process control, status feedback information and maintenance procedures for the equipment and operations within the standard laboratory module.

  19. Standard Review Plan Overview

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technical Framework for EM Projects Critical Decision (CD) Milestones Review & Approval Standard Review Plan (SRP) E n v i r o n m e n t a l M a n a g e m e n t DOE - EM - SRP - 2010 2nd Edition Overview March 2010 This page intentionally left blank. Standard Review Plan, 2 nd Edition, March 2010 1 Standard Review Plan Overview Technical Framework for EM Projects Critical Decision Milestones Review and Approval The Office of Environmental Management (EM) is responsible for managing the

  20. International Technology Exchange Division: 1993 Annual report

    SciTech Connect (OSTI)

    Not Available

    1993-12-31

    The Office of Technology Development (OTD) was established to ensure that reliable and acceptable technologies are available for implementation at DOE sites and that a technically trained work force is available to complete the EM mission by 2019. OTD established the International Technology Exchange Staff (ITES) to identify, evaluate, and acquire international technologies which can accelerate US DOE cleanup operations. ITES`s goal is to pursue international collaboration among government organizations, educational institutions, and private industry to identify world-wide needs and available technologies that will meet US environmental needs in general, and EM cleanup needs in particular; and establish mechanisms by which US government ER/WM technologies will be transferred to the US private sector for commercialization and export to international markets. ITES has developed the following strategic objectives to implement its international goals: develop and implement EM`s policy for international programs in accordance with DOE and US Government policies and regulations; establish efficient and predictable international technology transfer mechanisms; assist the US private sector in the commercialization and deployment of federally funded EM technologies and related knowledge in international markets; leverage US and non-US resources to accelerate international development and regulatory acceptance of EM technologies; contribute to the improvement of EM`s training of US students, scientists, and managers on international environmental issues. A summary and descriptions of program activities and accomplishments are given for 17 programs which comprise the four main areas of the ITES program: Activities with the Former Soviet Union, International Technology Transfer, International Cooperation, and Information Systems and Publications. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.

  1. Building Energy Standards

    Office of Energy Efficiency and Renewable Energy (EERE)

    The 2015 Vermont Commercial Building Energy Standards (CBES) took effect on March 1, 2015. The code is based on the 2015 IECC, with amendments to incorporate ASHRAE 90.1-2013. The new guidelines ...

  2. Renewable Portfolio Standard

    Office of Energy Efficiency and Renewable Energy (EERE)

    In October 1999, Wisconsin enacted Act 9, becoming the first state to enact a renewable portfolio standard (RPS) without having restructured its electric utility industry. The RPS sets a total goal...

  3. Renewables Portfolio Standard

    Broader source: Energy.gov [DOE]

    Note: SB 350, signed on October 7, 2015, made a number of changes to California's Renewables Portfolio Standard (RPS). Most notably, SB 350 extended the timeline and requirements under the RPS to...

  4. Renewable Portfolio Standard

    Broader source: Energy.gov [DOE]

    In January 2005, the District of Columbia Council enacted a Renewable Portfolio Standard (RPS) that applies to all retail electricity sales in the District. In October 2008 the RPS was amended by...

  5. Renewable Energy Standard

    Office of Energy Efficiency and Renewable Energy (EERE)

    Notes: In July 2015, the Tenth Circuit Court of Appeals upheld the constitutionality Colorado's renewable energy standard (Energy & Environment Legal, et al v. Epel, et al, case number 14-1216). 

  6. Renewable Portfolio Standard

    Broader source: Energy.gov [DOE]

    NOTE:  On November 2nd 2015, Governor Cumo directed the Public Service Department (PSC) to establish a new Clean Energy Standard mandating 50% of the electricity consumed in NY to come from clean...

  7. Standard Offer Program

    Office of Energy Efficiency and Renewable Energy (EERE)

    Note: H.B. 40, enacted in June 2015, changes the name of the Sustainably Priced Energy Enterprise Development (SPEED) Program to the Standard Offer Program and replaces the associated state...

  8. Standardization of Firearms

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2000-03-02

    Establishes Department of Energy (DOE) requirements for the standardization of firearms and limitations of firearms inventories maintained in support of safeguards and security activities. Does not cancel other directives.

  9. June 2005 Standards Forum

    Office of Environmental Management (EM)

    ... In 1993, it appeared as DOE Electrical Safety Handbook and in 1998 as a DOE technical ... and the National Fire Protection Standard (NFPA-70E) along with more stringent ...

  10. Energy Efficiency Resource Standard

    Broader source: Energy.gov [DOE]

    In 2008, New Mexico enacted H.B. 305, the Efficient Use of Energy Act, which created an Energy Efficiency Resource Standard (EERS) for New Mexico’s electric utilities, and a requirement that all ...

  11. STANDARD FORM NO. 64

    Office of Legacy Management (LM)

    qz-5 STANDARD FORM NO. 64 rl . . .' . , G Ojice Memoawl crl LA STATES GOVER pi,+ ip; ; (' , TO : F. M . Belmore, M remtor, Produution Division DATE: Deomnber FROM : R. F. Van Wy ...

  12. Roundness calibration standard

    DOE Patents [OSTI]

    Burrus, Brice M.

    1984-01-01

    A roundness calibration standard is provided with a first arc constituting the major portion of a circle and a second arc lying between the remainder of the circle and the chord extending between the ends of said first arc.

  13. Renewables Portfolio Standard

    Broader source: Energy.gov [DOE]

    New Jersey's Renewable Portfolio Standard (RPS) was first adopted in 1999 and has been updated several times. The total RPS requirement in New Jersey including solar carve out is 24.39% by EY 2028....

  14. Standard Subject Classification System

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1978-07-19

    The order establishes the Department of Energy (DOE) Standard Subject Classification System for classifying documents and records by subject, including correspondence, directives, and forms. Canceled by DOE O 0000.1A.

  15. Energy Conservation Standards Activities

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... of either: (1) a final rule or (2) final determination that standards do not need to be amended. ** Pursuant to section 315 of Public Law 112-74 (and subsequently ...

  16. Organic Superconductors

    SciTech Connect (OSTI)

    Charles Mielke

    2009-02-27

    Intense magnetic fields are an essential tool for understanding layered superconductors. Fundamental electronic properties of organic superconductors are revealed in intense (60 tesla) magnetic fields. Properties such as the topology of the Fermi surface and the nature of the superconducting order parameter are revealed. With modest maximum critical temperatures~13K the charge transfer salt organic superconductors prove to be incredibly valuable materials as their electronically clean nature and layered (highly anisotropic) structures yield insights to the high temperature superconductors. Observation of de Haas-van Alphen and Shubnikov-de Haas quantum oscillatory phenomena, magnetic field induced superconductivity and re-entrant superconductivity are some of the physical phenomena observed in the charge transfer organic superconductors. In this talk, I will discuss the nature of organic superconductors and give an overview of the generation of intense magnetic fields; from the 60 tesla millisecond duration to the extreme 1000 tesla microsecond pulsed magnetic fields.

  17. DOE technical standards list. Department of Energy standards index

    SciTech Connect (OSTI)

    1995-08-01

    This document was prepared for use by personnel involved in the selection and use of DOE technical standards and other Government and non-Government standards. This TSL provides listing of current DOE technical standards, non-Government standards that have been adopted by DOE, other Government documents in which DOE has a recorded interest, and canceled DOE technical standards. Information on new DOE technical standards projects, technical standards released for coordination, recently published DOE technical standards, and activities of non-Government standards bodies that may be of interest to DOE is published monthly in Standards Actions.

  18. Understanding Small-Molecule Interactions in Metal-Organic Frameworks...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Understanding Small-Molecule Interactions in Metal-Organic Frameworks: Coupling Experiment ... guest molecules and the internal surface of the framework must first be understood. ...

  19. ORISE: Standards development

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Standards development For 30 years, health physicists with the Oak Ridge Institute for Science and Education (ORISE) have actively participated in the development of industry standards that provide guidance and support to decontamination and decommissioning projects across the United States. Because of our extensive experience conducting radiological surveys and site characterization, our federal agency customers, such as the U.S. Nuclear Regulatory Commission (NRC) and the U.S. Department of

  20. SAE Standards Support

    SciTech Connect (OSTI)

    Gowri, Krishnan

    2012-11-01

    This report summarizes PNNL activities in FY 2012 in support of the following two vehicle communication standards activities: Technical support to SAE, ANSI and NIST technical working groups. PNNL actively contributed to the use case development, harmonization, and evaluation of the SAE standards activities for vehicle to grid communication Tested and validated a set of potential technologies for meeting SAE communication requirements and provided recommendations for technology choices.

  1. Energy Conservation Standards Activities

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Report to Congress August 2014 United States Department of Energy Washington, DC 20585 Energy Conservation Standards Activities Report to Congress | Page i Message from the Assistant Secretary I am pleased to provide you with the semi-annual Implementation Report on Energy Conservation Standards Activities of the U.S. Department of Energy (DOE). This report meets the requirements of Section 141 of the Energy Policy Act of 2005 (EPACT 2005) and Sections 305 and 321 of the Energy Independence and

  2. Organizing Committee

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Organizing Committee Organizing Committee Large Scale Computing and Storage Requirements for Advanced Scientific Computing Research An ASCR / NERSC Workshop January 5-6, 2011 Dr. Karen Pao ASCR Yukiko Sekine NERSC Program Manager, ASCR Kathy Yelick NERSC Director Francesca Verdier NERSC Department Head for Services Richard Gerber NERSC User Services John Shalf NERSC Advanced Technologies Group Harvey Wasserman NERSC User Services Last edited: 2016-04-29 11:35:22

  3. Organizing Committee

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Organizing Committee Organizing Committee R. Todd Anderson Program Manager, BER Climate and Environmental Sciences Anjuli Barnzai Program Manager, BER Climate and Environmental Sciences Susan Gregurick Program Manager, BER Biological Systems Yukiko Sekine NERSC Program Manager, ASCR Kathy Yelick NERSC Director Francesca Verdier NERSC Department Head for Services Richard Gerber NERSC User Services Harvey Wasserman NERSC System Architecture Last edited: 2016-04-29 11:35:21

  4. Organizing Committee

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Organizing Committee Organizing Committee Large Scale Computing and Storage Requirements for Fusion Energy Science August 3-4, 2010 Dr. John Mandrekas Advanced Fusion Simulations; FES HPC Allocations Yukiko Sekine NERSC Program Manager, ASCR Kathy Yelick NERSC Director Francesca Verdier NERSC Department Head for Services Richard Gerber NERSC User Services Alice Koniges NERSC Advanced Technologies Harvey Wasserman NERSC User Services Last edited: 2016-04-29 11:35:21

  5. Organizing Committee

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Organizing Committee Organizing Committee Large Scale Computing and Storage Requirements for High Energy Physics November 12-13, 2009 Amber Boehnlein Division Scientist, Fermi National Accelerator Laboratory, on assignment to DOE Office of HEP. Glen Crawford Program Manager, Research and Technology Division, DOE Office of HEP. Yukiko Sekine NERSC Program Manager, ASCR Kathy Yelick NERSC Director Francesca Verdier NERSC Department Head for Services Richard Gerber NERSC User Services Harvey

  6. Organizing Committee

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Organizing Committee Organizing Committee Large Scale Computing and Storage Requirements for Basic Energy Sciences An ASCR / BES / NERSC Workshop February 9-10, 2010 Jim Davenport Program Manager for Theoretical Condensed Material Physics Mark R. Pederson Program Manager for Theoretical and Computational Chemistry Nicholas B. Woodward Program Manager, Geosciences Research Program Yukiko Sekine NERSC Program Manager, ASCR Kathy Yelick NERSC Director Francesca Verdier NERSC Department Head for

  7. EZ-FLO International: Order (2010-CW-1401)

    Broader source: Energy.gov [DOE]

    DOE ordered EZ-FLO International, Inc. to pay a $20,000 civil penalty after finding EZ-FLO had failed to certify that certain models of showerhead comply with the applicable water conservation standard.

  8. DOE Technical Standards List. Directory of DOE and contractor personnel involved in non-government standards activities

    SciTech Connect (OSTI)

    1997-06-01

    This is a periodic report on the level of agency participation in non-Government standards activities. This technical standards list is intended to assist US Department of Energy (DOE) management and other personnel involved in the DOE technical Standards Program by identifying those participating individuals. The body of this document contains a listing of DOE employees and DOE contractors who have submitted a Record of Non-Government Standards Activity. Additional names were added from rosters supplied by non-Government standards bodies. Appendices to this document are provided to list the information by parent employment organization, by non-Government standards activity, and by the proper names of the non-Government standards organizations and committees.

  9. DOE technical standards list: Department of Energy standards index

    SciTech Connect (OSTI)

    1999-05-01

    This Department of Energy (DOE) technical standards list (TSL) has been prepared by the Office of Nuclear Safety Policy and Standards (EH-31) on the basis of currently available technical information. Periodic updates of this TSL will be issued as additional information is received on standardization documents being issued, adopted, or canceled by DOE. This document was prepared for use by personnel involved in the selection and use of DOE technical standards and other Government and non-Government standards. This TSL provides listings of current DOE technical standards, non-Government standards that have been adopted by DOE, other standards-related documents in which DOE has a recorded interest, and canceled DOE technical standards. Information on new DOE technical standards projects, technical standards released for coordination, recently published DOE technical standards, and activities of non-Government standards bodies that may be of interest to DOE is published monthly in Standards Actions.

  10. AVTA: Hydrogen Internal Combustion Engine Vehicle Specifications and Test

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Procedures | Department of Energy Hydrogen Internal Combustion Engine Vehicle Specifications and Test Procedures AVTA: Hydrogen Internal Combustion Engine Vehicle Specifications and Test Procedures HICEV Technical Specifications (127.53 KB) HICEV America Test Sequence (71.27 KB) ETA-HITP01 Implementation of SAE Standard J1263 - Road Load Measurements and Dynamometer Simulation Using Coast Down Techniques (114.28 KB) ETA-HITP02 Implementation of SAE Standard J1666 May93 - HICE Vehicle

  11. Standards and Codes

    Broader source: Energy.gov [DOE]

    The Department of Energy (DOE) is committed to improving the energy efficiency of residential buildings in a cost-effective manner. By working with teams of researchers, industry, and organizations...

  12. Standard Energy Efficiency Data (SEED) Platform Homepage Screenshot

    Broader source: Energy.gov [DOE]

    The Standard Energy Efficiency Data (SEED) Platform™ is an open source software application that helps organizations easily manage data on the energy performance of large groups of buildings. This is a screenshot of the application homepage.

  13. Codes and Standards Research, Development and Demonstration Roadmap, May 2006

    Fuel Cell Technologies Publication and Product Library (EERE)

    C&S RD&D Roadmap - 2008: This Roadmap is a guide to the Research, Development & Demonstration activities that will provide data required for Standards Development Organizations (SDOs) to develop perfo

  14. Fermilab | About | Organization | Fermilab Organization

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Organization Fermilab Organization < Back to About Fermilab Fermilab Org Chart Accelerator Division Accelerator Physics Center CMS Center Core Computing Division ESH&Q FESS Finance Section LBNF Project Far-Site LBNF Project Near-Site LBNF Project Office LBNF Project LCLS-II Project Neutrino Division Office of Communication Office of Integrated Planning and Performance Management Office of Project Support Services Office of the CFO Office of the CIO Office of the CPO PIP-II Project PPD

  15. Organization Chart | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Organization Chart Organization Chart Organization Chart Printable PDF Mission Leadership

  16. President Bush Issues Executive Order Designating ITER International Fusion

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Energy Organization A Public Interest Organization | U.S. DOE Office of Science (SC) President Bush Issues Executive Order Designating ITER International Fusion Energy Organization A Public Interest Organization News News Home Featured Articles Science Headlines 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 Science Highlights Presentations & Testimony News Archives Communications and Public Affairs Contact Information Office of Science U.S. Department of Energy 1000

  17. International Workshop on Characterization and PIE Needs for Fundamental Understanding of Fuels Performance and Safety

    SciTech Connect (OSTI)

    Not Listed

    2011-12-01

    The International Workshop on Characterization and PIE Needs to Support Science-Based Development of Innovative Fuels was held June 16-17, 2011, in Paris, France. The Organization for Economic Co-operation and Development (OECD), Nuclear Energy Agency (NEA) Working Party on the Fuel Cycle (WPFC) sponsored the workshop to identify gaps in global capabilities that need to be filled to meet projected needs in the 21st century. First and foremost, the workshop brought nine countries and associated international organizations, together in support of common needs for nuclear fuels and materials testing, characterization, PIE, and modeling capabilities. Finland, France, Germany, Republic of Korea, Russian Federation, Sweden, Switzerland, United Kingdom, United States of America, IAEA, and ITU (on behalf of European Union Joint Research Centers) discussed issues and opportunities for future technical advancements and collaborations. Second, the presentations provided a base level of understanding of current international capabilities. Three main categories were covered: (1) status of facilities and near term plans, (2) PIE needs from fuels engineering and material science perspectives, and (3) novel PIE techniques being developed to meet the needs. The International presentations provided valuable data consistent with the outcome of the National Workshop held in March 2011. Finally, the panel discussion on 21st century PIE capabilities, created a unified approach for future collaborations. In conclusion, (1) existing capabilities are not sufficient to meet the needs of a science-based approach, (2) safety issues and fuels behavior during abnormal conditions will receive more focus post-Fukushima; therefore we need to adopt our techniques to those issues, and (3) International collaboration is needed in the areas of codes and standards development for the new techniques.

  18. International safeguards data authentication

    SciTech Connect (OSTI)

    Melton, R.B.; Smith, C.E.; DeLand, S.M.; Manatt, D.R.

    1996-07-01

    The International Safeguards community is becoming increasingly reliant on information stored in electronic form. In international monitoring and related activities it must be possible to verify and maintain the integrity of this electronic information. This paper discusses the use of data authentication technology to assist in accomplishing this task. The paper provides background information, identifies the relevance to international safeguards, discusses issues related to export controls, algorithm patents, key management and the use of commercial vs. custom software.

  19. Internal Revenue Service

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ode X SCHEDULE A (Form 5500) Department of the Treasury Internal Revenue Service Department of Labor Employee Benefits Security Administration Pension Benefit...

  20. International Subcommittee Report

    Broader source: Energy.gov (indexed) [DOE]

    Report Dr. Regis A. Matzie, Chair NEAC Meeting December 10, 2014 1 Externalities of Nuclear Power Important International Considerations Safety - because of the potential...

  1. International petroleum statistics report

    SciTech Connect (OSTI)

    1996-08-01

    This report provides information on current international petroleum production, demand, imports, and stocks. World oil demand and OECD demand data are presented for the years 1970 thru 1995.

  2. Native Intern Profile Page

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The intern will work with the executive management teams to solve other problems as they arise. Morgan Gray Tribal A liation: Chickasaw Nation University: Oklahoma State University ...

  3. EM International. Volume 1

    SciTech Connect (OSTI)

    Not Available

    1993-07-01

    It is the intent of EM International to describe the Office of Environmental Restoration and Waste Management`s (EM`s) various roles and responsibilities within the international community. Cooperative agreements and programs, descriptions of projects and technologies, and synopses of visits to international sites are all highlighted in this semiannual journal. Focus on EM programs in this issue is on international collaboration in vitrification projects. Technology highlights covers: in situ sealing for contaminated sites; and remote sensors for toxic pollutants. Section on profiles of countries includes: Arctic contamination by the former Soviet Union, and EM activities with Germany--cooperative arrangements.

  4. Technical Standards Newsletters | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technical Standards Newsletters Technical Standards Newsletters July 5, 2016 Technical Standards Newsletter - June 2016 Standards Actions Technical Standards Newsletter, June 2016 February 24, 2016 Technical Standards Newsletter - February 2016 Standards Actions Technical Standards Newsletter, February 2016 October 19, 2015 Technical Standards Newsletter - October 2015 Standards Actions Technical Standards Newsletter, October 2015 April 21, 2015 Technical Standards Newsletter - April 2015

  5. Department of Energy Standards Index

    SciTech Connect (OSTI)

    1995-08-01

    This TSL, intended for use in selecting and using DOE technical standards and other Government and non-Government standards, provides listing of current and inactive DOE technical standards, non-Government standards adopted by DOE, other Government documents in which DOE has a recorded interest, and cancelled DOE technical standards.

  6. Codes and standards research, development and demonstration roadmap

    SciTech Connect (OSTI)

    None, None

    2008-07-22

    C&S RD&D Roadmap - 2008: This Roadmap is a guide to the Research, Development & Demonstration activities that will provide data required for Standards Development Organizations (SDOs) to develop performance-based codes and standards for a commercial hydrogen fueled transportation sector in the U.S.

  7. Status of cool roof standards in the United States

    SciTech Connect (OSTI)

    Akbari, Hashem; Levinson, Ronnen

    2007-06-01

    Since 1999, several widely used building energy efficiency standards, including ASHRAE 90.1, ASHRAE 90.2, the International Energy Conservation Code, and California's Title 24 have adopted cool roof credits or requirements. We review the technical development of cool roof provisions in the ASHRAE 90.1, ASHRAE 90.2, and California Title 24 standards, and discuss the treatment of cool roofs in other standards and energy-efficiency programs. The techniques used to develop the ASHRAE and Title 24 cool roof provisions can be used as models to address cool roofs in building energy standards worldwide.

  8. Model conservation standards bibliography

    SciTech Connect (OSTI)

    Not Available

    1986-06-01

    This bibliography is divided into sections dealing with building design (superinsulation, solar houses, earth sheltered houses, heat loss calculation, lighting, retrofitting); heating, ventilation, and air conditioning; windows; doors; walls; roofs; floors; air leakage/infiltration; insulation materials; indoor air quality; moisture; performance; codes, laws, standards; economics; and program description. (DLC)

  9. Renewable Energy Standard

    Broader source: Energy.gov [DOE]

    NOTE: H.B. 7413 enacted on June 2016 extends the state Renewable Energy Standard (RES) to 2035, which was previously set to expire at the end of 2019. The RES is set to increase by 1.5% annually,...

  10. Materials, Reliability, & Standards

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Materials, Reliability, & Standards - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Energy Defense Waste Management

  11. Derived Concentration Technical Standard

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2011-05-05

    This standard supports the implementation of Department of Energy (DOE) Order 458.1, Radiation Protection of the Public and the Environment. It also establishes the numerical values of DCSs in a manner reflecting the current state of knowledge and practice in radiation protection

  12. DOE technical standards list: Department of Energy standards index

    SciTech Connect (OSTI)

    1997-06-01

    This technical standards list (TSL) was prepared for use by personnel involved in the selection and use of US DOE technical standards and other government and non-government standards. This TSL provides listings of current DOE technical standards, non-government standards that have been adopted by DOE, other government documents in which DOE has a recorded interest, and cancelled DOE technical standards. Standards are indexed by type in the appendices to this document. Definitions of and general guidance for the use of standards are also provided.

  13. ISO 50001 Energy Management Standard | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technical Assistance » ISO 50001 Energy Management Standard ISO 50001 Energy Management Standard The ISO 50001 energy management standard is a proven framework for industrial facilities, commercial facilities, or entire organizations to manage energy-including all aspects of energy procurement and use. An energy management system establishes the structure and discipline to implement technical and management strategies that significantly cut energy costs and greenhouse gas emissions-and sustain

  14. Technical Standards, Program Project Justification Statement - August 29,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2012 | Department of Energy Program Project Justification Statement - August 29, 2012 Technical Standards, Program Project Justification Statement - August 29, 2012 August 29, 2012 DOE Technical Standards Program Project Justification Statement As part of the new justification process for developing or revising DOE Technical Standards, organizations, people are asked to provide the listed information (in numeric format) in a Project Justification Statement (PJS) prior to submitting the

  15. DOE standard: Radiological control

    SciTech Connect (OSTI)

    Not Available

    1999-07-01

    The Department of Energy (DOE) has developed this Standard to assist line managers in meeting their responsibilities for implementing occupational radiological control programs. DOE has established regulatory requirements for occupational radiation protection in Title 10 of the Code of Federal Regulations, Part 835 (10 CFR 835), ``Occupational Radiation Protection``. Failure to comply with these requirements may lead to appropriate enforcement actions as authorized under the Price Anderson Act Amendments (PAAA). While this Standard does not establish requirements, it does restate, paraphrase, or cite many (but not all) of the requirements of 10 CFR 835 and related documents (e.g., occupational safety and health, hazardous materials transportation, and environmental protection standards). Because of the wide range of activities undertaken by DOE and the varying requirements affecting these activities, DOE does not believe that it would be practical or useful to identify and reproduce the entire range of health and safety requirements in this Standard and therefore has not done so. In all cases, DOE cautions the user to review any underlying regulatory and contractual requirements and the primary guidance documents in their original context to ensure that the site program is adequate to ensure continuing compliance with the applicable requirements. To assist its operating entities in achieving and maintaining compliance with the requirements of 10 CFR 835, DOE has established its primary regulatory guidance in the DOE G 441.1 series of Guides. This Standard supplements the DOE G 441.1 series of Guides and serves as a secondary source of guidance for achieving compliance with 10 CFR 835.

  16. International Program Action Table - October 2012 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Communication & Engagement International Programs International Program Action Table - October 2012 International Program Action Table - October 2012 International Program ...

  17. NSS-8 Workshop Summary International Workshop on Nanoscale Spectroscopy and

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Nanotechnology | Argonne National Laboratory NSS-8 Workshop Summary International Workshop on Nanoscale Spectroscopy and Nanotechnology August 1, 2014 Tweet EmailPrint Organized by Center for Nanoscale Materials and Advanced Photon Source The International Workshop on Nanoscale Spectroscopy and Nanotechnology 8 (NSS-8), organized by the Center for Nanoscale Materials (CNM) and Advanced Photon Source (APS), was held under sunny, summer skies from July 28-31, 2014, in the world-class Gleacher

  18. Biodiesel Vehicle and Infrastructure Codes and Standards Chart (Revised) (Fact Sheet), NREL (National Renewable Energy Laboratory)

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Many standards development organizations (SDOs) are working to develop codes and standards needed for the utilization of alternative fuel vehicle technologies. This chart shows the SDOs responsible for leading the support and development of key codes and standards for biodiesel. Biodiesel Vehicle and Infrastructure Codes and Standards Chart Vehicles Storage Dispensing Infrastructure Engine Testing: Fuel Systems: Fuel Lubricants: Powertrain Systems: Containers: Dispensing Operations: Dispensing

  19. POTENTIAL DIMETHYLMERCURY CONCENTRATION IN WATER & ORGANIC CONDENSATE

    SciTech Connect (OSTI)

    MEACHAM, J.E.

    2004-12-28

    This document bounds potential dimethylmercury concentration in water or organic condensate that might form in ventilation systems or cooler tank regions. Dimethylmercury concentrations were extremely low and would be below drinking water standards in the water condensate.

  20. NEAC International Subcommittee Recommendations

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    International Subcommittee Recommendations December 2014 Background Externalities of nuclear power are major considerations in the international arena. These externalities are primarily geopolitical considerations and considerations related to: * Safety of nuclear power plants - because of the potential impact that severe accidents can have on the nuclear industry globally; * Energy security - particularly in countries with little domestic energy resources because of the stable and reliable

  1. COORDINATION OF DOE TECHNICAL STANDARDS

    Broader source: Energy.gov [DOE]

    PurposeThis procedure provides guidance on the formal coordination of DOE Technical Standards in the DOE Technical Standards Program (TSP). The purpose of coordination of draft technical standards...

  2. July 17, 2008; HSS/Union Working Group Meeting, Safety Standards, 10 CFR 851 - Agenda

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    6-24-08 Draft HSS/Union Working Group Meeting July 17, 2008 1:00 - 4:00 pm EST FORS 7E-069 Call-in: 301-903-9197 SUBJECT: SAFETY STANDARDS / 10 CFR 851 Core Union Working Groups Safety Standards: Metal Trades Department AFL-CIO - Lead International Brotherhood of Electrical Workers (IBEW) Operative Plasterers' & Cement Masons' International Association (OPCMIA) 10 CFR 851: United Steel, Paper and Forestry, Rubber, Manufacturing, Energy, Allied Industrial and Service Workers International

  3. DOE Announces International Agreement on Global Science Online Gateway |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy International Agreement on Global Science Online Gateway DOE Announces International Agreement on Global Science Online Gateway June 12, 2008 - 1:30pm Addthis WASHINGTON, DC - The U.S. Department of Energy (DOE) today announced the establishment of a multilateral alliance to govern the rapidly growing online gateway to international scientific research information--WorldWideScience.org. Officials from organizations representing 38 countries formalized their commitment

  4. New work on updating and extending the nuclear data standards

    SciTech Connect (OSTI)

    Carlson, A.D.; Pronyaev, V.G.; Capote, R.; Hambsch, F.J.; Kaeppeler, F.; Lederer, C.; Mannhart, W.; Mengoni, A.; Nelson, R. O.; Schillebeeckx, P.; Talou, P.; Tagesen, S.; Vonach, H.; Vorobyev, A.; Wallner, A.

    2011-07-01

    An International Atomic Energy Agency (IAEA) Data Development Project was initiated to provide a mechanism for allowing new experimental data and improvements in evaluation procedures to be incorporated into new evaluations of the standards. The work on this project is ongoing. In the past very long periods sometimes occurred between evaluations of the standards. Through the use of this Project, such long periods should not occur. Work on the cross section standards through this Project has included an update of the experimental data to be used in the cross section standards evaluations, a study of the uncertainties obtained in the international standards evaluation, and improvements in the smoothing procedure for capture cross sections. It was decided that this Project should have a broader range of activities than just the cross section standards and thus encompass standards related activities. The following are being investigated: improvements in the gold cross section at energies below where it is considered a standard and work on certain cross sections that are not as well known as the cross section standards but could be very useful as reference cross sections relative to which certain types of cross section measurements can be made. This work includes prompt gamma-ray production in fast neutron-induced reactions, and work on the {sup 252}Cf spontaneous fission neutron spectrum and the {sup 235}U thermal neutron fission spectrum. Most of the data investigated through this Project are used in dosimetry applications. (authors)

  5. Physics Beyond the Standard Model

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Physics Beyond the Standard Model 1663 Los Alamos science and technology magazine Latest Issue:October 2015 past issues All Issues submit Physics Beyond the Standard Model...

  6. Standard Solar | Open Energy Information

    Open Energy Info (EERE)

    Standard Solar Name: Standard Solar Address: 202 Perry Parkway Place: Gaithersburg, Maryland Zip: 20877 Region: Northeast - NY NJ CT PA Area Sector: Solar Product: Solar...

  7. Beyond the Standard Model Theory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Beyond the Standard Model Theory Beyond the Standard Model Understanding discoveries at the Energy, Intensity, and Cosmic Frontiers Get Expertise Rajan Gupta (505) 667-7664 Email ...

  8. National Incident Management System (NIMS) Standards Review Panel Workshop Summary Report

    SciTech Connect (OSTI)

    Stenner, Robert D.; Kirk, Jennifer L.; Stanton, James R.; Shebell, Peter; Schwartz, Deborah S.; Judd, Kathleen S.; Gelston, Gariann M.

    2006-02-07

    The importance and need for full compliant implementation of NIMS nationwide was clearly demonstrated during the Hurricane Katrina event, which was clearly expressed in Secretary Chertoff's October 4, 2005 letter addressed to the State's governors. It states, ''Hurricane Katrina was a stark reminder of how critical it is for our nation to approach incident management in a coordinated, consistent, and efficient manner. We must be able to come together, at all levels of government, to prevent, prepare for, respond to, and recover from any emergency or disaster. Our operations must be seamless and based on common incident management doctrine, because the challenges we face as a nation are far greater than capabilities of any one jurisdiction.'' The NIMS is a system/architecture for organizing response on a ''national'' level. It incorporations ICS as a main component of that structure (i.e., it institutionalizes ICS in NIMS). In a paper published on the NIMS Website, the following statements were made: ''NIMS represents a core set of doctrine, principles, terminology, and organizational processes to enable effective, efficient and collaborative incident management at all levels. To provide the framework for interoperability and compatibility, the NIMS is based on a balance between flexibility and standardization.'' Thus the NIC is challenged with the need to adopt quality SDO generated standards to support NIMS compliance, but in doing so maintain the flexibility necessary so that response operations can be tailored for the specific jurisdictional and geographical needs across the nation. In support of this large and complex challenge facing the NIC, the Pacific Northwest National Laboratory (PNNL) was asked to provide technical support to the NIC, through their DHS Science and Technology ? Standards Portfolio Contract, to help identify, review, and develop key standards for NIMS compliance. Upon examining the challenge, the following general process appears to be a

  9. International Oil Supplies and Demands

    SciTech Connect (OSTI)

    Not Available

    1992-04-01

    The eleventh Energy Modeling Forum (EMF) working group met four times over the 1989--1990 period to compare alternative perspectives on international oil supplies and demands through 2010 and to discuss how alternative supply and demand trends influence the world's dependence upon Middle Eastern oil. Proprietors of eleven economic models of the world oil market used their respective models to simulate a dozen scenarios using standardized assumptions. From its inception, the study was not designed to focus on the short-run impacts of disruptions on oil markets. Nor did the working group attempt to provide a forecast or just a single view of the likely future path for oil prices. The model results guided the group's thinking about many important longer-run market relationships and helped to identify differences of opinion about future oil supplies, demands, and dependence.

  10. International Oil Supplies and Demands

    SciTech Connect (OSTI)

    Not Available

    1991-09-01

    The eleventh Energy Modeling Forum (EMF) working group met four times over the 1989--90 period to compare alternative perspectives on international oil supplies and demands through 2010 and to discuss how alternative supply and demand trends influence the world's dependence upon Middle Eastern oil. Proprietors of eleven economic models of the world oil market used their respective models to simulate a dozen scenarios using standardized assumptions. From its inception, the study was not designed to focus on the short-run impacts of disruptions on oil markets. Nor did the working group attempt to provide a forecast or just a single view of the likely future path for oil prices. The model results guided the group's thinking about many important longer-run market relationships and helped to identify differences of opinion about future oil supplies, demands, and dependence.

  11. Microsoft Word - M2FT-14LB0811011_International Collab Activities...

    Office of Environmental Management (EM)

    ... Table 2-1 summarizes the status of spent nuclear fuel (SNF) and high-level waste (HLW) management ... in international organizations, working groups, committees, and expert panels. ...

  12. Organization | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    About Us Organization Organization Organization Download Printable PDF PDF icon Organization Chart - Dated: 07122015 Key Resources PMCDP EVMS PARS IIe FPD Resource Center PM ...

  13. Standardized radiological dose evaluations

    SciTech Connect (OSTI)

    Peterson, V.L.; Stahlnecker, E.

    1996-05-01

    Following the end of the Cold War, the mission of Rocky Flats Environmental Technology Site changed from production of nuclear weapons to cleanup. Authorization baseis documents for the facilities, primarily the Final Safety Analysis Reports, are being replaced with new ones in which accident scenarios are sorted into coarse bins of consequence and frequency, similar to the approach of DOE-STD-3011-94. Because this binning does not require high precision, a standardized approach for radiological dose evaluations is taken for all the facilities at the site. This is done through a standard calculation ``template`` for use by all safety analysts preparing the new documents. This report describes this template and its use.

  14. Standard Scenarios Annual Report

    Broader source: Energy.gov [DOE]

    The National Renewable Energy Laboratory is conducting a study sponsored by the U.S. Department of Energy DOE, Office of Energy Efficiency and Renewable Energy (EERE), that aims to document and implement an annual process designed to identify a realistic and timely set of input assumptions (e.g., technology cost and performance, fuel costs), and a diverse set of potential futures (standard scenarios), initially for electric sector analysis.

  15. ASHRAE Standard 152 Spreadsheet

    Broader source: Energy.gov [DOE]

    ASHRAE Standard 152 quantifies the delivery efficiency of duct systems, based on factors including location, leakage, and insulation of ductwork. This spreadsheet tool developed by Lawrence Berkeley National Laboratory (LBNL) and modified by the National Renewable Energy Laboratory, assists with the calculation of seasonal distribution system efficiency, This calculation is required by the House Simulation Protocols when the simulation tool being used does not permit detailed duct modeling.

  16. DOE standard: Firearms safety

    SciTech Connect (OSTI)

    1996-02-01

    Information in this document is applicable to all DOE facilities, elements, and contractors engaged in work that requires the use of firearms as provided by law or contract. The standard in this document provides principles and practices for implementing a safe and effective firearms safety program for protective forces and for non-security use of firearms. This document describes acceptable interpretations and methods for meeting Order requirements.

  17. Standard interface file handbook

    SciTech Connect (OSTI)

    Shapiro, A.; Huria, H.C. )

    1992-10-01

    This handbook documents many of the standard interface file formats that have been adopted by the US Department of Energy to facilitate communications between and portability of, various large reactor physics and radiation transport software packages. The emphasis is on those files needed for use of the VENTURE/PC diffusion-depletion code system. File structures, contents and some practical advice on use of the various files are provided.

  18. International energy annual 1996

    SciTech Connect (OSTI)

    1998-02-01

    The International Energy Annual presents an overview of key international energy trends for production, consumption, imports, and exports of primary energy commodities in over 220 countries, dependencies, and areas of special sovereignty. Also included are population and gross domestic product data, as well as prices for crude oil and petroleum products in selected countries. Renewable energy reported in the International Energy Annual includes hydroelectric power, geothermal, solar, and wind electric power, biofuels energy for the US, and biofuels electric power for Brazil. New in the 1996 edition are estimates of carbon dioxide emissions from the consumption of petroleum and coal, and the consumption and flaring of natural gas. 72 tabs.

  19. International Workshop on Gamma Spectrometry Analysis Codes for U and Pu Isotopics: Workshop Results and Next Steps

    SciTech Connect (OSTI)

    McGinnis, Brent R; Solodov, Alexander A; Shipwash, Jacqueline L; Zhernosek, Alena V; McKinney, Teressa L; Pickett, Chris A; Peerani, Paolo

    2009-01-01

    In November 2008, the Institute of Nuclear Materials Management (INMM) and the European Safeguards Research and Development Association (ESARDA) co-hosted the International Workshop on Gamma Spectrometry Analysis Codes for U and Pu Isotopics at the Oak Ridge National Laboratory (ORNL). This workshop was conducted in response to needs expressed by the international safeguards community to understand better the capabilities and limitations of the codes; to ensure these codes are sustained; and to ensure updates or revisions are performed in a controlled manner. The workshop was attended by approximately 100 participants. The participants included code developers, code suppliers, safeguards specialists, domestic and international inspectors, process operators, regulators, and programme sponsors from various government agencies. The workshop provided a unique opportunity for code developers, commercial distributors and end users to interact in a hands-on laboratory environment to develop solutions for programmatic and technical issues associated with the various codes. The workshop also provided an international forum for discussing development of an internationally accepted standard test method. This paper discusses the organization of the workshop, its goals and objectives and feedback received from the participants. The paper also describes the significance of the working group's contribution to improving codes that are commonly used during inspections to verify that nuclear facilities are compliant with treaty obligations that ensure nuclear fuel cycle facilities are used for peaceful purposes.

  20. EM international activities: May 1998 highlights

    SciTech Connect (OSTI)

    1998-05-01

    This publication is produced twice a year by the International Technology Systems Application staff. This issue is divided into the following sections: (1) Global Issues Facing Environmental Management; (2) Activities in Western Europe; (3) Activities in Central and Eastern Europe; (4) Activities in Russia; (5) Activities in Asia and the Pacific Rim; (6) Activities in South America; (7) Activities in North America; (8) Country studies; and (9) International Organizations. Some topics discussed are nuclear materials management, radioactive waste and hazardous waste management, and remedial action programs.

  1. A history of the Building Energy Standards Program

    SciTech Connect (OSTI)

    Shankle, D.L.; Merrick, J.A.; Gilbride, T.L.

    1994-02-01

    This report describes the history of the Pacific Northwest Laboratory`s (PNL`s) work in development of energy standards for commercial and residential construction in the United States. PNL`s standards development efforts are concentrated in the Building Energy Standards Program (the Program), which PNL conducts for the U.S. Department of Energy (DOE) Office of Codes and Standards. The Program has worked with DOE, the American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. (ASHRAE), and other building codes and standards organizations to develop, evaluate, and promulgate energy standards in all sectors of the building industry. This report describes the recent history of U.S. code development and PNL`s contributions through the 1980s and early 1990s, up to the passage of the Energy Policy Act of 1992. Impacts to standards development resulting from the passage of this act will be described in other reports.

  2. Review of Consensus Standard Spectra for Flat Plate and Concentrating Photovoltaic Performance

    SciTech Connect (OSTI)

    Myers, D.

    2011-09-01

    Consensus standard reference terrestrial solar spectra are used to establish nameplate ratings for photovoltaic device performance at standard reporting conditions. This report describes reference solar spectra developed in the United States and international consensus standards community which are widely accepted as of this writing (June 2011).

  3. SF 6432-IN International Commercial Transactions

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Department Release Date: 11/17/15 Page 1 of 11 Printed copies of this document are uncontrolled. Retrieve latest version electronically. SANDIA CORPORATION SF 6432-IN (11/2015) SECTION II STANDARD TERMS AND CONDITIONS FOR INTERNATIONAL COMMERCIAL TRANSACTIONS THE FOLLOWING CLAUSES APPLY TO THIS CONTRACT AS INDICATED UNLESS SPECIFICALLY DELETED, OR EXCEPT TO THE EXTENT THEY ARE SPECIFICALLY SUPPLEMENTED OR AMENDED IN WRITING IN THE SIGNATURE PAGE OR SECTION I OF THIS CONTRACT. (CTRL+CLICK ON A

  4. International project -- RBMK safety review

    SciTech Connect (OSTI)

    Hall, S.F.; Gabaraev, B.A.

    1996-07-01

    A major international RBMK safety review project managed by AEA Technology and funded by the CEC TACIS Programme, and the governments of Canada, Sweden and Finland is assessing the safety of RBMK Reactors as operated in Russia, Lithuania and Ukraine. RBMK reactors have been the subject of numerous safety studies by other Eastern and Western European organizations and Canada. Their objectives were, by necessity, not consistent (for example, identifying the deficiencies, reviewing and assessing the safety, checking the existing safety reports, establishing western style safety justifications). However, they share a common technical content in many areas. As a result a considerable number of Safety Recommendations have already been published. The current problem is to categorize and evaluate these recommendations.

  5. Internal Controls Evaluations

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4, 2016 U.S. DEPARTMENT OF ENERGY Internal Control Evaluations Fiscal Year 2016 Guidance Page | 2 Table of Contents I. Introduction .............................................................................................................................................. 4 A. Background ......................................................................................................................................... 4 B. New for FY

  6. International resources law

    SciTech Connect (OSTI)

    Not Available

    1991-01-01

    This book covers: Historical origins of civil code legal systems; Modern civil law practice for mineral lawyers; Treaties and agreements for protection of international investments; Europe 1992-toward a single energy market; Dispute resolution in international agreements; Assessment of political risk; Reducing political risk; Protecting mineral investments from upheaval in developing countries; Typical world petroleum arrangements; government take in the Pacific Rim - Papua New Guinea; Mineral base of the USSR and prospects of investment; International taxation for the mining practitioner; Tax considerations - branch versus subsidiary; Doing business in the host country - nontax considerations; Impact of host-country laws on operations and profits; Mineral development and native rights - New Zealand; Designing the investment vehicle: mining; International oil and gas joint ventures; Selected U.S. laws with extraterritorial effect; U.S. tax and securities laws applied to foreign joint venturers; and Extraterritorial effect of U.S. laws.

  7. Internal Patent Instructions

    Broader source: Energy.gov [DOE]

    The internal patent instructions (IPIs) were originally established as a means for providing a common reference source to all patent counsel offices on centralized instructions, as stated in the...

  8. NEMS International Energy Module

    Gasoline and Diesel Fuel Update (EIA)

    EIA NEMS International Energy Module Model Documentation Report vii Mr. G. Daniel Butler U.S. Department of Energy EI-812 1000 Independence Ave., SW Washington, DC 20585 Tel:...

  9. International Energy Module

    Gasoline and Diesel Fuel Update (EIA)

    EIA NEMS International Energy Module Model Documentation Report vii Mr. G. Daniel Butler U.S. Department of Energy EI-812 1000 Independence Ave., SW Washington, DC 20585 Tel:...

  10. International petroleum statistics report

    SciTech Connect (OSTI)

    1996-03-01

    This report presents data on international oil production, demand, imports, exports, and stocks. World oil production and OECD demand data are for the years 1970 through 1994; OECD stocks from 1973 through 1994; and OECD trade from 1984 through 1994.

  11. International petroleum statistics report

    SciTech Connect (OSTI)

    1996-12-01

    This report presents data on international oil production, demand, imports, and stocks. World oil production and OECD demand data are for the years 1970 through 1995; stocks from 1973 through 1995, and trade from 1985 through 1995.

  12. NEAC International Subcommittee Report

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... for Peace Conference Room, 5A-118 1000 Independence Ave, SW Washington, DC 20585 11 DOE NEAC International Subcommittee Meeting October 29-30, 2015 Room 5A-118, Atoms for Peace ...

  13. International Energy Module

    Gasoline and Diesel Fuel Update (EIA)

    self-contained units which are linked by an integrating mechanism. The NEMS International Energy Module (IEM) computes world oil prices, provides a set of crude oil and refined...

  14. HydroVision International

    Broader source: Energy.gov [DOE]

    The HydroVision International Conference and Exhibition offers attendees countless opportunities to network, share best practices, meet with product and service providers, and more.  Held over five...

  15. Health hazard evaluation report rdHETA 90-145-2086, Map International, Fairmont, West Virginia. Final report

    SciTech Connect (OSTI)

    Cornwell, R.J.; Knutti, E.; Lyman, M.

    1990-11-01

    In response to a request from the International Brotherhood of Teamsters, Chauffeurs, Warehousemen, and Helpers of America, a study was conducted of possible hazardous working conditions at MAP International (SIC-3296), Fairmont, West Virginia. The facility manufactured fibrous-glass for thermal and acoustical insulation. Personal breathing zone samples and area air samples were taken and analyzed for exposure to fibrous-glass (14808607), formaldehyde (50000), phenol (108952), ammonia (7664417), and organic vapors. The levels detected were all below allowable standards. Workers were not following recommended safety and health procedures prescribed in the Material Safety Data Sheets for the materials they were using. The medical questionnaires indicated workers were experiencing symptoms consistent with exposure to fibrous-glass and the materials used in its production. Eye irritation, upper respiratory irritation, skin irritation, chronic cough, and shortness of breath were demonstrated. The author recommends specific measures to reduce exposures and improve work practices.

  16. Internal combustion engine

    SciTech Connect (OSTI)

    Bernauer, O.

    1980-10-07

    An internal combustion engine is described that has walls delimiting the working space or spaces of the internal combustion engine, in which a hydrogen-impervious, encapsulated metal hydride storage device is provided which is in heat-conducting contact with these walls; the interior of the encapsulation is adapted to be selectively connected to a source of hydrogen and/or to a separate further hydrogen storage device.

  17. International petroleum statistics report

    SciTech Connect (OSTI)

    Not Available

    1994-05-01

    This monthly publication provides current international oil data. The Report presents data on international oil production, demand, imports, exports, and stocks. Section 1 contains time series data on world oil production, and on oil demand and stocks in the OECD. Section 2 presents an oil supply/demand balance for the world. Section 3 presents data on oil imports by OECD countries. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries.

  18. International petroleum development agreements

    SciTech Connect (OSTI)

    Smith, E.E.

    1993-12-31

    There are recognizable legal elements in all of the international arrangements for petroleum development currently in use but no arrangements are exactly like the typical American oil and gas lease. This article discusses differences and approaches to the differences in legal aspects of international petroleum development agreements. Topics covered include the following: oil and national sovereignty; obtaining a development agreement; concession and production sharing agreements; participation; differences among agreements.

  19. International Energy Outlook 2016

    U.S. Energy Information Administration (EIA) Indexed Site

    484(2016) I May 2016 International Energy Outlook 2016 ~ Independent Statistics & Ana[ysis e~ ~* a~ 1 U.S. ~~ergy. Information Administration Contacts The International Energy Outlook 2016 was prepared by the U.S. Energy Information Administration (EIA) under the direction of John Conti, Assistant Administrator for Energy Analysis (john.conti@eia.gov, 202-586-2222); Paul Holtberg, Team Leader, Analysis Integration Team (paul.holtberg@eia.gov, 202-586-1284); Jim Diefenderfer, Director, Office

  20. (International meetings on ecology)

    SciTech Connect (OSTI)

    DeAngelis, D.L.; Garten, C.T. Jr.; Turner, M.G.

    1990-09-25

    the travelers attended the Fifth International Congress of Ecology (INTECOL) in Yokohama, Japan, and two presented invited papers and chaired symposia. One traveler also attended the OJI International Seminar in Gifu, Japan and the Fukuoka Symposium on Theoretical Ecology in Fukuoka, Japan and presented invited papers. At these scientific gatherings, a large number of symposia and specific presentations were relevant to current research at Oak Ridge National Laboratory (ORNL), especially in the areas of landscape dynamics, plant physiology, and aquatic ecosystems.

  1. International Energy Agency

    Broader source: Energy.gov [DOE]

    DOE's market transformation efforts have reached to European and other countries who are part of the international distributed and decentralized energy community. Through its partnership with DOE, the combined heat and power (CHP) program of the International Energy Agency (IEA) conducts research and analysis of CHP markets and deployment efforts around the world and has used lessons learned from U.S. research, development, and deployment efforts to recommend market transformation activities and policies that will lead to new CHP installations worldwide.

  2. International Activities | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    International Activities International Activities International Activities The International Program assists the DOE Office of Environmental Management (EM) in identifying technologies and strategies for waste processing, groundwater and soil remediation, spent nuclear fuel and surplus nuclear material disposition, and facility deactivation and decommissioning. The International Program seeks to transform advances in science and engineering into practical solutions for environmental remediation.

  3. DOE technical standards list: Directory of DOE and contractor personnel involved in non-government standards activities

    SciTech Connect (OSTI)

    1999-05-01

    The body of this document contains a listing of DOE employees and DOE contractors who have submitted form DOE F 1300.2, Record of Non-Government Standards Activity, which is attached to the end of this document. Additional names were added from rosters supplied by non-Government standards bodies. The committees or governing bodies in which the person participates is listed after each name. An asterisk preceding the committee notation indicates that the person has identified himself or herself as the DOE representative on that committee. Appendices to this document are also provided to sort the information by the parent employment organization, by non-Government standards activity, and by the proper names of the non-Government standards organizations and committees. DOE employees and contractors listed in this technical standards list are those recorded as of May 1, 1999.

  4. DOE-TSPP-7-2013, Maintaining DOE Technical Standards | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    7-2013, Maintaining DOE Technical Standards DOE-TSPP-7-2013, Maintaining DOE Technical Standards Technical Standards Program Procedures (TSPP) - September 16, 2013 This Procedure provides guidance for the routine maintenance of the Department of Energy (DOE) Technical Standards. This Procedure applies to all DOE Headquarters and field organizations, management and operating contractors, and laboratories (hereafter referred to collectively as Technical Standards Program (TSP) participants)

  5. JLab Registration/International Services Office

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Welcome to JR/IS Important New Information Electronic Access Portal Process Overview and Screenshots Checking Status of Visitor/Guest Registration Form for Travel Coordinators As part of the Human Resources Department, the JLab Registration/International Services Office (JRIS) provides assistance to all Jefferson Lab personnel for completion of registration, training requirements, badging, and all areas of visa/immigration. Our goal is to provide our researchers and employees with an organized,

  6. Standard-E hydrogen monitoring system field acceptance testprocedure

    SciTech Connect (OSTI)

    Schneider, T.C.

    1997-02-01

    The purpose of this document is to demonstrate that the Standard-E Hydrogen Monitoring Systems (SHMS-E) installed on the Waste Tank Farms in the Hanford 200 Areas are constructed as intended by the design.

  7. Management Principles for Nonproliferation Organizations

    SciTech Connect (OSTI)

    Frazar, Sarah L.; Hund, Gretchen

    2012-03-06

    This paper identifies business models and six management principles that can be applied by a nonproliferation organization to maximize the value and effectiveness of its products. The organizations responsible for reducing the nuclear proliferation threat have experienced a substantial growth in responsibility and visibility since the September 11 attacks. Since then, the international community has witnessed revelations of clandestine nuclear facilities, nuclear black markets, periodic nuclear tests, and a resurgence of interest by countries worldwide in developing nuclear capabilities. The security environment will likely continue to evolve in unexpected ways since most of the proliferation threats with which the world will be forced to contend remain unforeseen. To better prepare for and respond to this evolving security environment, many nonproliferation organizations are interested in finding new or better ways to increase the effectiveness and efficiency of their operations. Of course, all organizations, whether they are market driven or non-profit, must operate effectively and efficiently if they are to succeed. Indeed, as this study demonstrates, many of the management principles that this study recommends can help all organizations succeed. However, this study pays particular attention to nonproliferation organizations because of the mission they are responsible for fulfilling. Nonproliferation organizations, including nonproliferation programs that operate within a larger national security organization, are responsible for reducing the threat of nuclear, chemical and biological weapons. These organizations have an enduring mandate from the public and the international community not to fail in the completion of their mission for failure could have detrimental impacts on international security, public health and the environment. Moreover, the public expects nonproliferation organizations and programs to fulfill their mission, even when resources are limited

  8. Microfabricated ion frequency standard

    DOE Patents [OSTI]

    Schwindt, Peter; Biedermann, Grant; Blain, Matthew G.; Stick, Daniel L.; Serkland, Darwin K.; Olsson, III, Roy H.

    2010-12-28

    A microfabricated ion frequency standard (i.e. an ion clock) is disclosed with a permanently-sealed vacuum package containing a source of ytterbium (Yb) ions and an octupole ion trap. The source of Yb ions is a micro-hotplate which generates Yb atoms which are then ionized by a ultraviolet light-emitting diode or a field-emission electron source. The octupole ion trap, which confines the Yb ions, is formed from suspended electrodes on a number of stacked-up substrates. A microwave source excites a ground-state transition frequency of the Yb ions, with a frequency-doubled vertical-external-cavity laser (VECSEL) then exciting the Yb ions up to an excited state to produce fluorescent light which is used to tune the microwave source to the ground-state transition frequency, with the microwave source providing a precise frequency output for the ion clock.

  9. Supernova Twins: Making Standard Candles More Standard Than Ever

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Supernova Twins: Making Standard Candles More Standard Than Ever Supernova Twins: Making Standard Candles More Standard Than Ever New Modeling Method Measures Cosmological Distances With Far Greater Accuracy January 13, 2016 Contact: Paul Preuss, paul_preuss@lbl.gov, +1 415 272 3253 supernovatwins From left, Greg Aldering, Kyle Boone, Hannah Fakhouri and Saul Perlmutter of the Nearby Supernova Factory. Behind them is a poster of a supernova spectrum. Matching spectra among different supernovae

  10. International nuclear waste management fact book

    SciTech Connect (OSTI)

    Abrahms, C W; Patridge, M D; Widrig, J E

    1995-11-01

    The International Nuclear Waste Management Fact Book has been compiled to provide current data on fuel cycle and waste management facilities, R and D programs, and key personnel in 24 countries, including the US; four multinational agencies; and 20 nuclear societies. This document, which is in its second year of publication supersedes the previously issued International Nuclear Fuel Cycle Fact Book (PNL-3594), which appeared annually for 12 years. The content has been updated to reflect current information. The Fact Book is organized as follows: National summaries--a section for each country that summarizes nuclear policy, describes organizational relationships, and provides addresses and names of key personnel and information on facilities. International agencies--a section for each of the international agencies that has significant fuel cycle involvement and a list of nuclear societies. Glossary--a list of abbreviations/acronyms of organizations, facilities, and technical and other terms. The national summaries, in addition to the data described above, feature a small map for each country and some general information that is presented from the perspective of the Fact Book user in the US.

  11. Carbon International | Open Energy Information

    Open Energy Info (EERE)

    International Jump to: navigation, search Name: Carbon International Place: London, United Kingdom Zip: NW1 8LH Sector: Carbon Product: London-based energy and communications...

  12. Student Trainee (Engineering)- Intern NTE

    Broader source: Energy.gov [DOE]

    The purpose of the Pathways Intern Employment Program is to provide the intern with exposure to public service, enhance educational experience, and support educational goals. The program is...

  13. BBI International | Open Energy Information

    Open Energy Info (EERE)

    BBI International Jump to: navigation, search Name: BBI International Place: Salida, Colorado Zip: 81201 Sector: Biofuels Product: Information service provider for the Biofuels...

  14. OK International | Open Energy Information

    Open Energy Info (EERE)

    OK International Jump to: navigation, search Name: OK International Address: san francisco Place: San Francisco, California Website: www.okinternational.org Coordinates:...

  15. Biofuels International | Open Energy Information

    Open Energy Info (EERE)

    International Jump to: navigation, search Name: Biofuels International Place: Indiana Sector: Biofuels Product: Pittsburgh based biofuels project developer presently developing a...

  16. Edison International | Open Energy Information

    Open Energy Info (EERE)

    International Jump to: navigation, search Name: Edison International Place: Rosemead, California Zip: 91770 Product: Utility company and parent of SCE and Edison Mission Energy....

  17. International energy annual 1997

    SciTech Connect (OSTI)

    1999-04-01

    The International Energy Annual presents an overview of key international energy trends for production, consumption, imports, and exports of primary energy commodities in over 220 countries, dependencies, and areas of special sovereignty. Also included are population and gross domestic product data, as well as prices for crude oil and petroleum products in selected countries. Renewable energy reported in the International Energy Annual includes hydroelectric power and geothermal, solar, and wind electric power. Also included are biomass electric power for Brazil and the US, and biomass, geothermal, and solar energy produced in the US and not used for electricity generation. This report is published to keep the public and other interested parties fully informed of primary energy supplies on a global basis. The data presented have been largely derived from published sources. The data have been converted to units of measurement and thermal values (Appendices E and F) familiar to the American public. 93 tabs.

  18. Earth shelter goes international

    SciTech Connect (OSTI)

    Boyer, L.L.

    1983-06-01

    Since the mid-1970's earth sheltered buildings in the US have become more numerous and important as a contemporary passive building concept. Further, an intense international interest has now developed, as evidenced by a number of important activities. One of these events is the 1983 International Conference on Energy Efficient Buildings with Earth Shelter Protection to be conducted during 1-6 August in Sydney, Australia. A review of past activities leading up to this event, as well as a brief review of the conference program, is the subject of this discussion.

  19. INTERNAL CUTTING DEVICE

    DOE Patents [OSTI]

    Russell, W.H. Jr.

    1959-06-30

    A device is described for removing material from the interior of a hollow workpiece so as to form a true spherical internal surface in a workpiece, or to cut radial slots of an adjustable constant depth in an already established spherical internal surface. This is accomplished by a spring loaded cutting tool adapted to move axially wherein the entire force urging the tool against the workpiece is derived from the spring. Further features of importance involve the provision of a seal between the workpiece and the cutting device and a suction device for carrying away particles of removed material.

  20. International petroleum statistics report

    SciTech Connect (OSTI)

    Not Available

    1994-12-01

    This document is a monthly publication that provides current international oil data. The Report presents data on international oil production, demand, imports, exports, and stocks. Section 1 contains time series data on world oil production, and on oil demand and stocks in the OECD. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. Section 4 presents annual time series data on world oil production and oil stocks, demand and trade in OECD countries.

  1. INTERNAL REPAIR OF PIPELINES

    SciTech Connect (OSTI)

    Robin Gordon; Bill Bruce; Nancy Porter; Mike Sullivan; Chris Neary

    2003-05-01

    The two broad categories of deposited weld metal repair and fiber-reinforced composite repair technologies were reviewed for potential application for internal repair of gas transmission pipelines. Both are used to some extent for other applications and could be further developed for internal, local, structural repair of gas transmission pipelines. Preliminary test programs were developed for both deposited weld metal repairs and for fiber-reinforced composite repair. To date, all of the experimental work pertaining to the evaluation of potential repair methods has focused on fiber-reinforced composite repairs. Hydrostatic testing was also conducted on four pipeline sections with simulated corrosion damage: two with composite liners and two without.

  2. Standards and Test Procedures | Department of Energy

    Energy Savers [EERE]

    Appliance & Equipment Standards Standards and Test Procedures Standards and Test Procedures The Department of Energy (DOE) establishes energy efficiency standards for certain ...

  3. Energy Standards for State Buildings

    Broader source: Energy.gov [DOE]

    The State is still required by statute to adopt planning and construction standards for state buildings that conserve energy and optimize the energy performance of new buildings. The standards mu...

  4. Energy Efficiency Standards for Appliances

    Broader source: Energy.gov [DOE]

    Connecticut enacted efficiency standards through legislative actions in 2004 and 2007 and 2011. This law covers the following products that have not been pre-empted by federal standards:...

  5. Air Conditioner Regional Standards Brochure

    Broader source: Energy.gov [DOE]

    DOE has adopted energy conservation standards for split-system air conditioners that vary depending on when and where a unit is installed. This brochure is designed to provide information about the new standards to distributors, contractors (installers), and consumers.

  6. Energy Efficiency Standards for Appliances

    Broader source: Energy.gov [DOE]

    In 2007 the District of Columbia (D.C.) enacted legislation, entitled the Energy Efficiency Standards Act of 2007, which created efficiency standards for six products, four of which were...

  7. Appliance and Equipment Efficiency Standards

    Broader source: Energy.gov [DOE]

    Arizona’s Appliance and Equipment Efficiency Standards (Arizona Revised Statutes, Title 44, Section 1375) set minimum energy efficiency standards for twelve products, all of which have since been...

  8. Active DOE Technical Standards Managers

    Office of Environmental Management (EM)

    TECHNICAL STANDARDS PROGRAM ASSIGNMENT TELEPHONEFAXEMAIL NAME DOE FACILITYADDRESS LOC ... Central Technical Authority Chief, Nuclear Safety Sta - CTACNS 1000 Independence ...

  9. A Standard for Neuroscience Data

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A Standard for Neuroscience Data A Standard for Neuroscience Data Berkeley Lab researchers have developed a computational framework for standardizing neuroscience data worldwide December 16, 2014 Contact: Linda Vu, +1 510 495 2402, lvu@lbl.gov Neural1.jpg Image Credit: Wikimedia Commons Thanks to standardized image file formats-like JPEG, PNG or TIFF-which store information every time you take a digital photo, you can easily share selfies and other pictures with anybody connected to a computer,

  10. International energy indicators. [International and US statistics

    SciTech Connect (OSTI)

    Bauer, E.K.

    1980-03-01

    For the international sector, a table of data is first presented followed by corresponding graph of the data for the following: (1) Iran: crude oil capacity, production, and shut-in, 1974 to February 1980; (2) Saudi Arabia (same as Iran); (3) OPEC (ex-Iran and Saudi Arabia); capacity, production, and shut-in, 1974 to January 1980; (4) non-OPEC Free World and US production of crude oil, 1973 to January 1980; (5) oil stocks: Free World, US, Japan, and Europe (landed), 1973 to 1979; (6) petroleum consumption by industrial countries, 1973 to October 1979; (7) USSR crude oil production, 1974 to February 1980; (8) Free World and US nuclear generation capacity, 1973 to January 1980. For the United States, the same data format is used for the following: (a) US imports of crude oil and products 1973 to January 1980; (b) landed cost of Saudi Arabia crude oil in current and 1974 dollars, 1974 to October 1979; (c) US trade in coal, 1973 to 1979; (d) summary of US merchandise trade, 1976 to January 1980; and (e) US energy/GNP ratio (in 1972 dollars), 1947 to 1979.

  11. Requirements for Xenon International

    SciTech Connect (OSTI)

    Hayes, James C.; Ely, James H.; Haas, Derek A.; Harper, Warren W.; Heimbigner, Tom R.; Hubbard, Charles W.; Humble, Paul H.; Madison, Jill C.; Morris, Scott J.; Panisko, Mark E.; Ripplinger, Mike D.; Stewart, Timothy L.

    2015-12-30

    This document defines the requirements for the new Xenon International radioxenon system. The output of this project will be a Pacific Northwest National Laboratory (PNNL) developed prototype and a manufacturer-developed production prototype. The two prototypes are intended to be as close to matching as possible; this will be facilitated by overlapping development cycles and open communication between PNNL and the manufacturer.

  12. Internal Control Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2008-10-28

    To ensure sound internal controls and overall consistency in exercising the statutory authorities that vest in the Secretary, the Administrator, National Nuclear Security Administration (NNSA), and Department's Chief Financial Officer (CFO), and to implement the Federal Managers' Financial Integrity Act of 1982 and related central agency guidance. Supersedes DOE O 413.1A.

  13. Rotary internal combustion engine

    SciTech Connect (OSTI)

    Le, L.K.

    1990-11-20

    This patent describes an internal combustion engine comprising; a rotary compressor mechanism; a rotary expander mechanism; and combustion chamber means disposed between the compressor mechanism and the expander mechanism, whereby compressed air is delivered to the combustion chamber through the compressor discharge port, and pressurized gas is delivered from the combustion chamber into the expander mechanism through the pressurized gas intake port.

  14. Requirements for Xenon International

    SciTech Connect (OSTI)

    Hayes, James C.; Ely, James H.

    2013-09-26

    This document defines the requirements for the new Xenon International radioxenon system. The output of this project will be a Pacific Northwest National Laboratory (PNNL) developed prototype and a manufacturer-developed production prototype. The two prototypes are intended to be as close to matching as possible; this will be facilitated by overlapping development cycles and open communication between PNNL and the manufacturer.

  15. Internal split field generator

    DOE Patents [OSTI]

    Thundat; Thomas George; Van Neste, Charles W.; Vass, Arpad Alexander

    2012-01-03

    A generator includes a coil of conductive material. A stationary magnetic field source applies a stationary magnetic field to the coil. An internal magnetic field source is disposed within a cavity of the coil to apply a moving magnetic field to the coil. The stationary magnetic field interacts with the moving magnetic field to generate an electrical energy in the coil.

  16. International energy outlook 1996

    SciTech Connect (OSTI)

    1996-05-01

    This International Energy Outlook presents historical data from 1970 to 1993 and EIA`s projections of energy consumption and carbon emissions through 2015 for 6 country groups. Prospects for individual fuels are discussed. Summary tables of the IEO96 world energy consumption, oil production, and carbon emissions projections are provided in Appendix A. The reference case projections of total foreign energy consumption and of natural gas, coal, and renewable energy were prepared using EIA`s World Energy Projection System (WEPS) model. Reference case projections of foreign oil production and consumption were prepared using the International Energy Module of the National Energy Modeling System (NEMS). Nuclear consumption projections were derived from the International Nuclear Model, PC Version (PC-INM). Alternatively, nuclear capacity projections were developed using two methods: the lower reference case projections were based on analysts` knowledge of the nuclear programs in different countries; the upper reference case was generated by the World Integrated Nuclear Evaluation System (WINES)--a demand-driven model. In addition, the NEMS Coal Export Submodule (CES) was used to derive flows in international coal trade. As noted above, foreign projections of electricity demand are now projected as part of the WEPS. 64 figs., 62 tabs.

  17. Energy-Efficiency Labels and Standards: A Guidebook forAppliances, Equipment, and Lighting - 2nd Edition

    SciTech Connect (OSTI)

    Wiel, Stephen; McMahon, James E.

    2005-04-28

    Energy-performance improvements in consumer products are an essential element in any government's portfolio of energy-efficiency and climate change mitigation programs. Governments need to develop balanced programs, both voluntary and regulatory, that remove cost-ineffective, energy-wasting products from the marketplace and stimulate the development of cost-effective, energy-efficient technology. Energy-efficiency labels and standards for appliances, equipment, and lighting products deserve to be among the first policy tools considered by a country's energy policy makers. The U.S. Agency for International Development (USAID) and several other organizations identified on the cover of this guidebook recognize the need to support policy makers in their efforts to implement energy-efficiency standards and labeling programs and have developed this guidebook, together with the Collaborative Labeling and Appliance Standards Program (CLASP), as a primary reference. This second edition of the guidebook was prepared over the course of the past year, four years after the preparation of the first edition, with a significant contribution from the authors and reviewers mentioned previously. Their diligent participation helps maintain this book as the international guidance tool it has become. The lead authors would like to thank the members of the Communications Office of the Environmental Energy Technologies Division, Lawrence Berkeley National Laboratory for their support in the development, production, and distribution of the guidebook. This guidebook is designed as a manual for government officials and others around the world responsible for developing, implementing, enforcing, monitoring, and maintaining labeling and standards setting programs. It discusses the pros and cons of adopting energy-efficiency labels and standards and describes the data, facilities, and institutional and human resources needed for these programs. It provides guidance on the design, development

  18. Modern Radiation Therapy for Extranodal Lymphomas: Field and Dose Guidelines From the International Lymphoma Radiation Oncology Group

    SciTech Connect (OSTI)

    Yahalom, Joachim; Illidge, Tim; Specht, Lena; Hoppe, Richard T.; Li, Ye-Xiong; Tsang, Richard; Wirth, Andrew

    2015-05-01

    Extranodal lymphomas (ENLs) comprise about a third of all non-Hodgkin lymphomas (NHL). Radiation therapy (RT) is frequently used as either primary therapy (particularly for indolent ENL), consolidation after systemic therapy, salvage treatment, or palliation. The wide range of presentations of ENL, involving any organ in the body and the spectrum of histological sub-types, poses a challenge both for routine clinical care and for the conduct of prospective and retrospective studies. This has led to uncertainty and lack of consistency in RT approaches between centers and clinicians. Thus far there is a lack of guidelines for the use of RT in the management of ENL. This report presents an effort by the International Lymphoma Radiation Oncology Group (ILROG) to harmonize and standardize the principles of treatment of ENL, and to address the technical challenges of simulation, volume definition and treatment planning for the most frequently involved organs. Specifically, detailed recommendations for RT volumes are provided. We have applied the same modern principles of involved site radiation therapy as previously developed and published as guidelines for Hodgkin lymphoma and nodal NHL. We have adopted RT volume definitions based on the International Commission on Radiation Units and Measurements (ICRU), as has been widely adopted by the field of radiation oncology for solid tumors. Organ-specific recommendations take into account histological subtype, anatomy, the treatment intent, and other treatment modalities that may be have been used before RT.

  19. Setting the Standard for Industrial Energy Efficiency

    SciTech Connect (OSTI)

    McKane, Aimee; Williams, Robert; Perry, Wayne; Li, Tienan

    2007-06-01

    Industrial motor-driven systems use more than 2194 billionkWh annually on a global basis and offer one of the largest opportunitiesfor energy savings.1 The International Energy Agency estimates thatoptimization of motor driven systems could reduce global electricitydemand by 7 percent through the application of commercially availabletechnologies and using well-tested engineering practices. Yet manyindustrial firms remain either unaware of or unable to achieve theseenergy savings. The same factors that make it so challenging to achieveand sustain energy efficiency in motor-driven systems (complexity,frequent changes) apply to the production processes that they support.Yet production processes typically operate within a narrow band ofacceptable performance. These processes are frequently incorporated intoISO 9000/14000 quality and environmental management systems, whichrequire regular, independent audits to maintain ISO certification, anattractive value for international trade. It is our contention that acritical step in achieving and sustaining energy efficiency ofmotor-driven systems specifically, and industrial energy efficiencygenerally, is the adoption of a corporate energy management standard thatis consistent with current industrial quality and environmentalmanagement systems such as ISO. Several energy management standardscurrently exist (US, Denmark, Ireland, Sweden) and specifications(Germany, Netherlands) others are planned (China, Spain, Brazil, Korea).This paper presents the current status of energy management standardsdevelopment internationally, including an analysis of their sharedfeatures and differences, in terms of content, promulgation, andimplementation. The purpose of the analysis is to describe the currentstate of "best practices" for this emerging area of energy efficiencypolicymaking and tosuggest next steps toward the creation of a trulyinternational energy management standard that is consistent with the ISOprinciples of measurement

  20. NREL: International Activities Home Page

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sponsors and Partners NREL conducts its international programs in support of many U.S. agencies-including the Department of Energy, Agency for International Development, Department of State, Environmental Protection Agency, Millennium Challenge Corporation, Overseas Private Development Investment Corporation, as well as numerous international sponsors and partners, including the United Nations (UN) agencies, the Australian government, Global Green Growth Institute, International Renewable

  1. STEP Intern Reference Check Sheet

    Broader source: Energy.gov [DOE]

    STEP Intern Reference Check Sheet, from the Tool Kit Framework: Small Town University Energy Program (STEP).

  2. Necessary and Sufficient Process leading to Work Smart Standards. Final report

    SciTech Connect (OSTI)

    1996-11-01

    The Necessary and Sufficient Process leading to Work Smart Standards is a Department of Energy initiative to assure adequate protection for workers, the public, and the environment. The Work Smart Standards initiative directs the Laboratory to develop a set of ES and H standards based on the work performed at the Laboratory and the hazards associated with the work. Berkeley Lab`s set of Work Smart Standards includes required Federal, State and local laws and, additionally, national and international standards which represent the highest operating standards of industrial and commercial institutions.

  3. ARM Standards Policy Committee Report

    SciTech Connect (OSTI)

    Cialella, A; Jensen, M; Koontz, A; McFarlane, S; McCoy, R; Monroe, J; Palanisamy, G; Perez, R; Sivaraman, C

    2012-09-19

    Data and metadata standards promote the consistent recording of information and are necessary to ensure the stability and high quality of Atmospheric Radiation Measurement (ARM) Climate Research Facility data products for scientific users. Standards also enable automated routines to be developed to examine data, which leads to more efficient operations and assessment of data quality. Although ARM Infrastructure agrees on the utility of data and metadata standards, there is significant confusion over the existing standards and the process for allowing the release of new data products with exceptions to the standards. The ARM Standards Policy Committee was initiated in March 2012 to develop a set of policies and best practices for ARM data and metadata standards.

  4. A Standard for Neuroscience Data

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    GE, Janelia Farm, Allen Institute for Brain Science and the International ... The computational tools could also help facilitate the White House's Brain Research ...

  5. Westinghouse Hanford Company (WHC) standards/requirements identification document (S/RID)

    SciTech Connect (OSTI)

    Bennett, G.L.

    1996-03-15

    This Standards/Requirements Identification Document (S/RID) set forth the Environmental Safety and Health (ES&H) standards/requirements for Westinghouse Hanford Company Level Programs, where implementation and compliance is the responsibility of these organizations. These standards/requirements are adequate to ensure the protection of the health and safety of workers, the public, and the environment.

  6. Analyses to support development of risk-informed separation distances for hydrogen codes and standards.

    SciTech Connect (OSTI)

    LaChance, Jeffrey L.; Houf, William G.; Fluer, Inc., Paso Robels, CA; Fluer, Larry; Middleton, Bobby

    2009-03-01

    The development of a set of safety codes and standards for hydrogen facilities is necessary to ensure they are designed and operated safely. To help ensure that a hydrogen facility meets an acceptable level of risk, code and standard development organizations are tilizing risk-informed concepts in developing hydrogen codes and standards.

  7. Standard Energy Efficiency Data (SEED) Platform - 2014 BTO Peer Review |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Data (SEED) Platform - 2014 BTO Peer Review Standard Energy Efficiency Data (SEED) Platform - 2014 BTO Peer Review Project Objective The Standard Energy Efficiency Data (SEED) software application helps organizations easily manage data on the energy performance of large groups of buildings, thus also improving the consistency and interoperability of the data. The project's objectives this year are to: (1) complete development of a production-grade, first version of SEED

  8. DOE technical standards list: Directory of DOE and contractor personnel involved in non-government standards activities

    SciTech Connect (OSTI)

    1996-08-01

    The body of this document contains a listing of DOE employees and DOE contractors who have submitted form DOE F 1300.2, Record of Non-Government Standards Activity, which is attached to the end of this document and to DOE Order 1300.2A. Additional names were added from rosters supplied by non-Government standards bodies. The committees or governing bodies in which the person participates is listed after each name. An asterisk preceding the committee notation indicates that the person has identified himself or herself as the DOE representative on that committee. Appendices to this document are also provided to sort the information by the parent employment organization, by non-Government standards activity, and by the proper names of the non-Government standards organizations and committees. DOE employees and contractors listed in this TSL are those recorded as of July 1, 1996.

  9. International Energy Annual, 1992

    SciTech Connect (OSTI)

    Not Available

    1994-01-14

    This report is prepared annually and presents the latest information and trends on world energy production and consumption for petroleum, natural gas, coal, and electricity. Trade and reserves are shown for petroleum, natural gas, and coal. Prices are included for selected petroleum products. Production and consumption data are reported in standard units as well as British thermal units (Btu) and joules.

  10. Update to M&O Contractor Model Subcontract entitled "Standard Research

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Subcontract (Educational Institution or Nonprofit Organization)" | Department of Energy M&O Contractor Model Subcontract entitled "Standard Research Subcontract (Educational Institution or Nonprofit Organization)" Update to M&O Contractor Model Subcontract entitled "Standard Research Subcontract (Educational Institution or Nonprofit Organization)" The purpose of this Policy Flash is to disseminate an update to the Management and Operating (M&O) Contractor

  11. Internal core tightener

    DOE Patents [OSTI]

    Brynsvold, Glen V.; Snyder, Jr., Harold J.

    1976-06-22

    An internal core tightener which is a linear actuated (vertical actuation motion) expanding device utilizing a minimum of moving parts to perform the lateral tightening function. The key features are: (1) large contact areas to transmit loads during reactor operation; (2) actuation cam surfaces loaded only during clamping and unclamping operation; (3) separation of the parts and internal operation involved in the holding function from those involved in the actuation function; and (4) preloaded pads with compliant travel at each face of the hexagonal assembly at the two clamping planes to accommodate thermal expansion and irradiation induced swelling. The latter feature enables use of a "fixed" outer core boundary, and thus eliminates the uncertainty in gross core dimensions, and potential for rapid core reactivity changes as a result of core dimensional change.

  12. Rotary internal combustion engine

    SciTech Connect (OSTI)

    Murray, J.L.; Mosca, J.O.

    1992-02-25

    This patent describes a rotary internal combustion engine. It includes a housing; a cam track internally disposed within the housing and adapted to receive a cam follower; an engine block disposed within the housing, the engine block being relatively rotatable within the housing about a central axis; means connectable to an external drive member for translating the relative rotation of the engine block with respect to the housing into useful work; at least one radially arranged cylinder assembly on the block, each cylinder assembly including a cylinder having a longitudinal axis extending generally radially outwardly from the rotational axis of the block, the cylinder including means defining an end wall, a piston member disposed within the cylinder and adapted to reciprocate within the cylinder; the piston, cylinder and cylinder end wall together.

  13. Internal combustion rotary engine

    SciTech Connect (OSTI)

    Chen, S.P.

    1993-08-24

    An internal combustion rotary engine is described comprising: an internal combustion chamber wherein a combustible fuel-air mixture is ignited for producing a driving gas flow; a central rotor having an outer surface in which at least one group of curved channels circumferentially-and-axially extending without radially extending through the central rotor; and at least one annular rotor each enclosing the central rotor having an inner surface in which a corresponding number of curved channels circumferentially-and-axially extending without radially extending through the annular rotor; when the curved channels in the central rotor communicate with the curved channels in the annular rotor, the driving gas flow circumferentially-and-axially passing between the outer surface of the central rotor and the inner surface of the annular rotor for rotating the central rotor and the annular rotor in opposite directions.

  14. International Nuclear Security

    SciTech Connect (OSTI)

    Doyle, James E.

    2012-08-14

    This presentation discusses: (1) Definitions of international nuclear security; (2) What degree of security do we have now; (3) Limitations of a nuclear security strategy focused on national lock-downs of fissile materials and weapons; (4) What do current trends say about the future; and (5) How can nuclear security be strengthened? Nuclear security can be strengthened by: (1) More accurate baseline inventories; (2) Better physical protection, control and accounting; (3) Effective personnel reliability programs; (4) Minimize weapons-usable materials and consolidate to fewer locations; (5) Consider local threat environment when siting facilities; (6) Implement pledges made in the NSS process; and (7) More robust interdiction, emergency response and special operations capabilities. International cooperation is desirable, but not always possible.

  15. February 2010 Standards Forum and Standards Actions Newsletter

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Method for the Determination of Total Hydrogen Content of Uranium Oxide Powders and Pellets by Carrier Gas Extraction. WK26277 - Standard Specification for Uranium ...

  16. DOE technical standards list. Department of Energy standards...

    Office of Scientific and Technical Information (OSTI)

    Subject: 42 ENGINEERING NOT INCLUDED IN OTHER CATEGORIES; 29 ENERGY PLANNING AND POLICY; US DOE; INDEXES; STANDARDS; SPECIFICATIONS; MANUALS; US DOD; US OSHA; NUCLEAR FACILITIES; ...

  17. Polarized internal target apparatus

    DOE Patents [OSTI]

    Holt, Roy J.

    1986-01-01

    A polarized internal target apparatus with a polarized gas target of improved polarization and density achieved by mixing target gas atoms with a small amount of alkali metal gas atoms, and passing a high intensity polarized light source into the mixture to cause the alkali metal gas atoms to become polarized which interact in spin exchange collisions with target gas atoms yielding polarized target gas atoms.

  18. Polarized internal target apparatus

    DOE Patents [OSTI]

    Holt, R.J.

    1984-10-10

    A polarized internal target apparatus with a polarized gas target of improved polarization and density (achieved by mixing target gas atoms with a small amount of alkali metal gas atoms, and passing a high intensity polarized light source into the mixture to cause the alkali metal gas atoms to become polarized which interact in spin exchange collisions with target gas atoms yielding polarized target gas atoms) is described.

  19. International petroleum statistics report

    SciTech Connect (OSTI)

    Not Available

    1994-06-01

    This report presents data on international oil production, demand, imports, exports, and stocks. Section 1 contains time series data on world oil production, and on oil demand and stocks in the OECD. Section 2 presents an oil supply/demand balance for the world, presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. Section 4 presents annual time series data on world oil production, oil stocks, demand, and trade in OECD countries.

  20. International petroleum statistics report

    SciTech Connect (OSTI)

    Not Available

    1995-01-01

    This monthly publication provides current data on international oil production, demand, imports, exports, and stocks. Section 1 contains time series data on world oil production, and on oil demand and stocks in the OECD. Section 2 presents an oil supply/demand balance for the world. Section 3 presents data on oil imports by OECD countries. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries.

  1. NREL: International Activities - Webmaster

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Webmaster Please enter your name and email address in the boxes provided, then type your message below. When you are finished, click "Send Message." NOTE: If you enter your e-mail address incorrectly, we will be unable to reply. Your name: Your email address: Your message: Send Message Printable Version International Activities Home Bilateral Partnerships Multilateral Partnerships Assessments & Tools Working with Us Did you find what you needed? Yes 1 No 0 Thank you for your

  2. International Cooperation Holiday Cheer

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Administration International Atomic Energy Agency Secretary Moniz awards Hutcheon memorial nonproliferation fellowship to Thomas Gray Energy Secretary Ernest Moniz (second from bottom left, clockwise) and Anne Harrington, NNSA deputy administrator for Defense Nuclear Nonproliferation (sitting next to Moniz), discuss Ian Hutcheon's legacy with his wife Nancy (across from Harrington) and daughter Dana Hutcheon Gordon. Energy... DOE/NNSA's Nonproliferation Experts Lead First Workshop on the

  3. International energy outlook 2006

    SciTech Connect (OSTI)

    2006-06-15

    This report presents international energy projections through 2030, prepared by the Energy Information Administration. After a chapter entitled 'Highlights', the report begins with a review of world energy and economic outlook, followed by energy consumption by end-use sector. The next chapter is on world oil markets. Natural gas, world coal market and electricity consumption and supply are then discussed. The final chapter covers energy-related carbon dioxide emissions.

  4. International Algae Symposium

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy’s Bioenergy Technologies Office Advanced Algal Systems Technology Manager Daniel Fishman represented the Office at the International Algae Symposium in Tokyo, Japan. Hosted at the University of Tsukuba’s newly established Algae Biomass Bioenergy Development Research Center, the symposium was an opportunity for algae researchers, policy makers, and industry leaders across the globe to learn about each other’s work.

  5. International markets for CCTs

    SciTech Connect (OSTI)

    Ferriter, J.P.

    1997-12-31

    The paper begins by describing the role of the International Energy Agency, the importance of coal, what the IEA is doing in the area of clean coal technology, and the role of the IEA Coal Industry Advisory Board. The paper then discusses which coal technologies will be chosen, what the problem areas are, and what can be done to accelerate the take-up of clean coal technologies.

  6. Internal Program Review

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    American Synchrophasor Initiative (NASPI) and Advanced Applications Research & Development (AARD) Internal Program Review 27-28 June 2013 Washington, DC Joe Eto Lawrence Berkeley National Lab DOE/OE Transmission Reliability Program 2 Management Review Topics  Project objective  Major technical accomplishments that will be completed this year  Deliverables and schedule for activities to be completed under FY13 funding  Risk factors affecting timely completion of planned activities

  7. International Subcommittee Report

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Dr. Regis A. Matzie, Chair NEAC Meeting December 10, 2014 1 Externalities of Nuclear Power Important International Considerations  Safety - because of the potential impact that severe accidents can have globally  Energy security - particularly in countries with little domestic energy resources  Reduction of green house gases - impact on global warming, severe weather, and flooding of coastal areas  Proliferation - particularly as it relates to the construction of sensitive nuclear

  8. Microsoft PowerPoint - Update on IEC Inverter Standards Activity - Sandia Wkshp 2013.pptx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Ball DNV KEMA Renewables (formerly BEW Engineering) Sandia Inverter Reliability Workshop Santa Clara, CA May 1, 2013 Update on IEC Inverter Standards Activity IEC Technical Committee (TC) 82 Solar photovoltaic energy systems  IEC = International Electrotechnical Commission, founded 1906  Prepares and publishes International Standards for all electrical, electronic and related technologies. These are known collectively as "electrotechnology".  ~174 TCs and SCs (Subcommittees),

  9. Standard Contract Amendment for New Reactors | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Amendment for New Reactors Standard Contract Amendment for New Reactors The following document is a contract amendment to a standard contract between the United States of America, represented by the U.S. Department of Energy, and a corporation organized and existing under the laws of a given state to dispose of Spent Nuclear Fuel (SNF)and/or High-Level Radioactive Waste (HRW). (446.09 KB) More Documents & Publications Standard Contract for Disposal of SNF and/or HRW Locations of Spent

  10. International energy outlook 1995, May 1995

    SciTech Connect (OSTI)

    1995-06-01

    The International Energy Outlook 1995 (IEO95) presents an assessment by the Energy Information Administration (EIA) of the international energy market outlook through 2010. The report is an extension of the EIA`s Annual Energy Outlook 1995 (AEO95), which was prepared using the National Energy Modeling System (NEMS). US projections appearing in the IEO95 are consistent with those published in the AEO95. IEO95 is provided as a statistical service to energy managers and analysts, both in government and in the private sector. The projects are used by international agencies, Federal and State governments, trade associations, and other planners and decisionmakers. They are published pursuant to the Department of energy Organization Act of 1977 (Public Law 95-91), Section 295(c). The IEO95 projections are based on US and foreign government policies in effect on October 1, 1994. IEO95 displays projections according to six basic country groupings. The regionalization has changed since last year`s report. Mexico has been added to the Organization for Economic Cooperation and Development (OECD), and a more detailed regionalization has been incorporated for the remainder of the world, including the following subgroups: non-OECD Asia, Africa, Middle East, and Central and South America. China is included in non-OECD Asia. Eastern Europe and the former Soviet Union are combined in the EE/FSU subgroup.

  11. International perceptions of US nuclear policy.

    SciTech Connect (OSTI)

    Stanley, Elizabeth A. (Georgetown Universtiy, Washington, DC)

    2006-02-01

    The report presents a summary of international perceptions and beliefs about US nuclear policy, focusing on four countries--China, Iran, Pakistan and Germany--chosen because they span the spectrum of states with which the United States has relationships. A paradox is pointed out: that although the goal of US nuclear policy is to make the United States and its allies safer through a policy of deterrence, international perceptions of US nuclear policy may actually be making the US less safe by eroding its soft power and global leadership position. Broadly held perceptions include a pattern of US hypocrisy and double standards--one set for the US and its allies, and another set for all others. Importantly, the US nuclear posture is not seen in a vacuum, but as one piece of the United States behavior on the world stage. Because of this, the potential direct side effects of any negative international perceptions of US nuclear policy can be somewhat mitigated, dependent on other US policies and actions. The more indirect and long term relation of US nuclear policy to US international reputation and soft power, however, matters immensely to successful multilateral and proactive engagement on other pressing global issues.

  12. Results from the Second International Module Intercomparison

    SciTech Connect (OSTI)

    Rummel, S.; Anderberg, A.; Emery, K.

    2005-11-01

    The peak-watt rating is a primary indicator of PV performance. The peak power rating is the maximum electrical power that is produced when the PV device is continuously illuminated at 1000 Wm/sup-2/ total irradiance under International Electrotechnical Commission Standard 60904-2 reference spectrum, and 25 deg C cell temperature. Most manufacturers trace their peak-watt rating through calibrations performed at recognized terrestrial calibration facilities. Manufacturers typically perform intercomparisons among a set of their modules internally with other plants and among. Sometimes they have the same module measured at different calibration facilities to determine the differences in calibration. This intercomparison was to mimic this procedure and supply new thin film samples along with samples that could pose other problems. These intercomparisons sample the laboratories' everyday procedures better than a formal intercomparison where the laboratories' best procedures and data scrutiny are used.

  13. NNSA Completes Fourth International Meeting on Next Generation Nuclear

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Safeguards | National Nuclear Security Administration | (NNSA) NNSA Completes Fourth International Meeting on Next Generation Nuclear Safeguards July 12, 2012 HANOI, VIETNAM - The U.S. Department of Energy's National Nuclear Security Administration (NNSA), together with the Vietnam Agency for Radiation and Nuclear Safety, announced today the successful completion of the Fourth International Meeting on Next Generation Safeguards. Organized by NNSA's Next Generation Safeguards Initiative

  14. OSTIblog Articles in the International Council for Scientific and Technical

    Office of Scientific and Technical Information (OSTI)

    Information Topic | OSTI, US Dept of Energy Office of Scientific and Technical Information International Council for Scientific and Technical Information Topic OSTI's contribution to international discovery: WorldWideScience.org by Kristin Bingham 03 Apr, 2008 in Products and Content On June 22, 2007, OSTI opened WorldWideScience.org, a global science gateway, to the public. WorldWideScience.org was an ambitious undertaking and OSTI was the perfect organization to take on the technical,

  15. International Carbon Storage Body Praises Department of Energy Projects |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Carbon Storage Body Praises Department of Energy Projects International Carbon Storage Body Praises Department of Energy Projects November 8, 2012 - 12:00pm Addthis Washington, DC - Three U.S. Department of Energy (DOE) projects have been identified by an international carbon storage organization as an important advancement toward commercialization and large-scale deployment of carbon capture, utilization, and storage (CCUS) technologies. The projects were officially

  16. International Hydrogen Fuel and Pressure Vessel Forum 2010 Proceedings

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    International Hydrogen Fuel and Pressure Vessel Forum 2010 Beijing, China September 27-29, 2010 Background The China Association for Hydrogen Energy, the Engineering Research Center of High Pressure Process Equipment and Safety of the Ministry of Education in China, and the United States Department of Energy (DOE) conducted the International Hydrogen Fuel and Pressure Vessel Forum 2010, at Tsinghua University in Beijing, China, September 27-29, 2010. The Forum was co-organized by Professor Z.Q.

  17. Internal Site Office Operations | U.S. DOE Office of Science (SC)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Internal Site Office Operations Ames Site Office (AMSO) AMSO Home About Organization Chart .pdf file (100KB) Federal Stewardship Internal Site Office Operations Jobs Projects Contract Management NEPA Documents Resources Contact Information Ames Site Office U.S. Department of Energy 9800 S. Cass Avenue Argonne, IL 60439 P: (630) 252-6167 F: (630) 252-2855 About Internal Site Office Operations Print Text Size: A A A FeedbackShare Page The Internal Site Office Operations manages Ames Site Office

  18. Standard-E hydrogen monitoring system shop acceptance test procedure

    SciTech Connect (OSTI)

    Schneider, T.C.

    1997-10-02

    The purpose of this report is to document that the Standard-E Hydrogen Monitoring Systems (SHMS-E), fabricated by Mid-Columbia Engineering (MCE) for installation on the Waste Tank Farms in the Hanford 200 Areas, are constructed as intended by the design. The ATP performance will verify proper system fabrication.

  19. standards | OpenEI Community

    Open Energy Info (EERE)

    Protection Agency Administrator, unveiled the joint effort, along with the Obama Administration, to create record fuel standards for vehicles built between 2017 and 2025....

  20. NREL: Photovoltaics Research - Standards Development

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Current standards lack specifics on how to precondition cadmium telluride (CdTe) and copper indium gallium diselenide (CIGS) modules so that when tested for reporting conditions, ...

  1. Project Analysis Standard Operating Procedure

    Office of Environmental Management (EM)

    Standard Operating Procedure (EPASOP) Issued by Office of Acquisition and Project Management MA-63 March 12, 2014 DEPARTMENT OF ENERGY Office of Acquisition and Project...

  2. Peer Review of Standards Rulemaking

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... contributes to the Program's and DOE's mission, goals, or strategy, and to society. ... goal of the Appliance Standards program in mind. * EERE Mission: Strengthen America's ...

  3. Interconnection Standards | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    construction by the utility in order accommodate the facility. The ICC adopted IEEE 1547 as the technical standard of evaluation in July 2007. Systems are considered to be...

  4. Microsoft Word - SPR Annual Report 2008 Final for Printing.doc

    Broader source: Energy.gov (indexed) [DOE]

    ... Organization for Standardization 9001 Quality Management System ... 46 Integration of the International Organization for Standardization 14001 into the Environmental Management ...

  5. Building the International Lattice Data Grid

    SciTech Connect (OSTI)

    Mark G. Beckett, Paul Coddington, Blint Jo, Chris M. Maynard, Dirk Pleiter, Osamu Tatebe, Tomoteru Yoshie

    2011-06-01

    We present the International Lattice Data Grid (ILDG), a loosely federated grid-of-grids for sharing data from Lattice Quantum Chromodynamics (LQCD) simulations. The ILDG comprises of metadata, file-format and web-service standards, which can be used to wrap regional data-grid interfaces, allowing seamless access to catalogues and data in a diverse set of collaborating regional grids. We discuss the technological underpinnings of the ILDG, primarily the metadata and the middleware, and offer a critique of its various aspects with the hindsight of the design work and the two years of production.

  6. Method of loading organic materials with group III plus lanthanide and actinide elements

    DOE Patents [OSTI]

    Bell, Zane W.; Huei-Ho, Chuen; Brown, Gilbert M.; Hurlbut, Charles

    2003-04-08

    Disclosed is a composition of matter comprising a tributyl phosphate complex of a group 3, lanthanide, actinide, or group 13 salt in an organic carrier and a method of making the complex. These materials are suitable for use in solid or liquid organic scintillators, as in x-ray absorption standards, x-ray fluorescence standards, and neutron detector calibration standards.

  7. Establishment of the International Power Institute. Final technical report

    SciTech Connect (OSTI)

    Julius E. Coles

    2000-08-04

    The International Power Institute, in collaboration with American industries, seeks to address technical, political, economic and cultural issues of developing countries in the interest of facilitating profitable transactions in power related infrastructure projects. IPI works with universities, governments and commercial organizations to render project-specific recommendations for private-sector investment considerations. IPI also established the following goals: Facilitate electric power infrastructure transactions between developing countries and the US power industry; Collaborate with developing countries to identify development strategies to achieve energy stability; and Encourage market driven solutions and work collaboratively with other international trade energy, technology and banking organizations.

  8. INTERNAL REPAIR OF PIPELINES

    SciTech Connect (OSTI)

    Robin Gordon; Bill Bruce; Ian Harris; Dennis Harwig; Nancy Porter; Mike Sullivan; Chris Neary

    2004-04-12

    The two broad categories of deposited weld metal repair and fiber-reinforced composite liner repair technologies were reviewed for potential application for internal repair of gas transmission pipelines. Both are used to some extent for other applications and could be further developed for internal, local, structural repair of gas transmission pipelines. Preliminary test programs were developed for both deposited weld metal repair and for fiber-reinforced composite liner repair. Evaluation trials have been conducted using a modified fiber-reinforced composite liner provided by RolaTube and pipe sections without liners. All pipe section specimens failed in areas of simulated damage. Pipe sections containing fiber-reinforced composite liners failed at pressures marginally greater than the pipe sections without liners. The next step is to evaluate a liner material with a modulus of elasticity approximately 95% of the modulus of elasticity for steel. Preliminary welding parameters were developed for deposited weld metal repair in preparation of the receipt of Pacific Gas & Electric's internal pipeline welding repair system (that was designed specifically for 559 mm (22 in.) diameter pipe) and the receipt of 559 mm (22 in.) pipe sections from Panhandle Eastern. The next steps are to transfer welding parameters to the PG&E system and to pressure test repaired pipe sections to failure. A survey of pipeline operators was conducted to better understand the needs and performance requirements of the natural gas transmission industry regarding internal repair. Completed surveys contained the following principal conclusions: (1) Use of internal weld repair is most attractive for river crossings, under other bodies of water, in difficult soil conditions, under highways, under congested intersections, and under railway crossings. (2) Internal pipe repair offers a strong potential advantage to the high cost of horizontal direct drilling (HDD) when a new bore must be created to

  9. DOE-TSPP-1, Technical Standards Program Responsibilities - July 1, 2009 |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy , Technical Standards Program Responsibilities - July 1, 2009 DOE-TSPP-1, Technical Standards Program Responsibilities - July 1, 2009 Technical Standards Program Procedures (TSPP) - August 26, 2009 This procedure describes the responsibilities of persons who are charged with implementing the DOE Technical Standards Program. This procedure applies to all DOE Headquarters and field organizations, management and operating contractors, and laboratories (hereafter referred to

  10. Propane Vehicle and Infrastructure Codes and Standards Chart (Revised) (Fact Sheet), NREL (National Renewable Energy Laboratory)

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Many standards development organizations (SDOs) are working to develop codes and standards needed for the utilization of alternative fuel vehicle technologies. This chart shows the SDOs responsible for leading the support and development of key codes and standards for propane. Propane Vehicle and Infrastructure Codes and Standards Chart Vehicle Systems Safety: Vehicle Tanks and Piping: Vehicle Components: Vehicle Dispensing Systems: Vehicle Dispensing System Components: Storage Systems: Storage

  11. International petroleum statistics report, July 1999

    SciTech Connect (OSTI)

    1999-07-01

    The International Petroleum Statistics Report is a monthly publication that provides current international oil data. This report is published for the use of Members of Congress, Federal agencies, State agencies, industry, and the general public. The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1990, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years and annually for the three years prior to that. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1998; OECD stocks from 1973 through 1998; and OECD trade from 1988 through 1998. 4 figs., 44 tabs.

  12. International petroleum statistics report, March 1998

    SciTech Connect (OSTI)

    1998-03-01

    The International Petroleum Statistics Report is a monthly publication that provides current international oil data. This report is published for the use of Members of Congress, Federal agencies, State agencies, industry, and the general public. The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1996; OECD stocks from 1973 through 1996; and OECD trade from 1986 through 1996.

  13. Internal absorber solar collector

    DOE Patents [OSTI]

    Sletten, Carlyle J.; Herskovitz, Sheldon B.; Holt, F. S.; Sletten, E. J.

    1981-01-01

    Thin solar collecting panels are described made from arrays of small rod collectors consisting of a refracting dielectric rod lens with an absorber imbedded within it and a reflecting mirror coated on the back side of the dielectric rod. Non-tracking collector panels on vertical walls or roof tops receive approximately 90% of solar radiation within an acceptance zone 60.degree. in elevation angle by 120.degree. or more in the azimuth sectors with a collector concentration ratio of approximately 3.0. Miniaturized construction of the circular dielectric rods with internal absorbers reduces the weight per area of glass, plastic and metal used in the collector panels. No external parts or insulation are needed as heat losses are low due to partial vacuum or low conductivity gas surrounding heated portions of the collector. The miniature internal absorbers are generally made of solid copper with black selective surface and the collected solar heat is extracted at the collector ends by thermal conductivity along the absorber rods. Heat is removed from end fittings by use of liquid circulants. Several alternate constructions are provided for simplifying collector panel fabrication and for preventing the thermal expansion and contraction of the heated absorber or circulant tubes from damaging vacuum seals. In a modified version of the internal absorber collector, oil with temperature dependent viscosity is pumped through a segmented absorber which is now composed of closely spaced insulated metal tubes. In this way the circulant is automatically diverted through heated portions of the absorber giving higher collector concentration ratios than theoretically possible for an unsegmented absorber.

  14. International energy annual, 1993

    SciTech Connect (OSTI)

    1995-05-08

    This document presents an overview of key international energy trends for production, consumption, imports, and exports of primary energy commodities in over 200 countries, dependencies, and areas of special sovereignty. Also included are population and gross domestic product data, as well as prices for crude oil and petroleum products in selected countries. Renewable energy includes hydroelectric, geothermal, solar and wind electric power and alcohol for fuel. The data were largely derived from published sources and reports from US Embassy personnel in foreign posts. EIA also used data from reputable secondary sources, industry reports, etc.

  15. International energy outlook 2005

    SciTech Connect (OSTI)

    2005-07-01

    This report presents international energy projections through 2025, prepared by the Energy Information Administration. The outlooks for major energy fuels are discussed, along with electricity, transportation, and environmental issues. After a chapter entitled 'Highlights', the report begins with a review of world energy and an economic outlook. The IEO2005 projections cover a 24 year period. The next chapter is on world oil markets. Natural gas and coal reserves and resources, consumption and trade discussed. The chapter on electricity deals with primary fuel use for electricity generation, and regional developments. The final section is entitled 'Energy-related greenhouse gas emissions'.

  16. International comparison of product certification and verification methods for appliances

    SciTech Connect (OSTI)

    Zhou, Nan; Romankiewicz, John; Fridley, David; Zheng, Nina

    2012-06-01

    Enforcement of appliance standards and consumer trust in appliance labeling are important foundations of growing a more energy efficient economy. Product certification and verification increase compliance rates which in turn increase both energy savings and consumer trust. This paper will serve two purposes: 1) to review international practices for product certification and verification as they relate to the enforcement of standards and labeling programs in the U.S., E.U., Australia, Japan, Canada, and China; and 2) to make recommendations for China to implement improved certification processes related to their mandatory standards and labeling program such as to increase compliance rates and energy savings potential.

  17. International Comparison of Product Certification and Verification Methods for Appliances

    SciTech Connect (OSTI)

    Zhou, Nan; Romankiewicz, John; Fridley, David; Zheng, Nina

    2012-06-01

    Enforcement of appliance standards and consumer trust in appliance labeling are important foundations of growing a more energy efficient economy. Product certification and verification increase compliance rates which in turn increase both energy savings and consumer trust. This paper will serve two purposes: 1) to review international practices for product certification and verification as they relate to the enforcement of standards and labeling programs in the U.S., E.U., Australia, Japan, Canada, and China; and 2) to make recommendations for China to implement improved certification processes related to their mandatory standards and labeling program such as to increase compliance rates and energy savings potential.

  18. Ordered organic-organic multilayer growth

    DOE Patents [OSTI]

    Forrest, Stephen R; Lunt, Richard R

    2015-01-13

    An ordered multilayer crystalline organic thin film structure is formed by depositing at least two layers of thin film crystalline organic materials successively wherein the at least two thin film layers are selected to have their surface energies within .+-.50% of each other, and preferably within .+-.15% of each other, whereby every thin film layer within the multilayer crystalline organic thin film structure exhibit a quasi-epitaxial relationship with the adjacent crystalline organic thin film.

  19. Ordered organic-organic multilayer growth

    DOE Patents [OSTI]

    Forrest, Stephen R.; Lunt, Richard R.

    2016-04-05

    An ordered multilayer crystalline organic thin film structure is formed by depositing at least two layers of thin film crystalline organic materials successively wherein the at least two thin film layers are selected to have their surface energies within .+-.50% of each other, and preferably within .+-.15% of each other, whereby every thin film layer within the multilayer crystalline organic thin film structure exhibit a quasi-epitaxial relationship with the adjacent crystalline organic thin film.

  20. Environmental radiation standards and risk limitation

    SciTech Connect (OSTI)

    Kocher, D.C.

    1987-01-01

    The Environmental Protection Agency and Nuclear Regulatory Commission have established environmental radiation standards for specific practices which correspond to limits on risk to the public that vary by several orders of magnitude and often are much less than radiation risks that are essentially unregulated, e.g., risks from radon in homes. This paper discusses a proposed framework for environmental radiation standards that would improve the correspondence with limitation of risk. This framework includes the use of limits on annual effective dose equivalent averaged over a lifetime, rather than limits on dose equivalent to whole body or any organ for each year of exposure, and consideration of exposures of younger age groups as well as adults; limits on annual effective dose equivalent averaged over a lifetime no lower than 0.25 mSv (25 mrem) per practice; maintenance of all exposures as low as reasonably achievable (ALARA); and establishment of a generally applicable de minimis dose for public exposures. Implications of the proposed regulatory framework for the current system of standards for limiting public exposures are discussed. 20 refs.

  1. A role for NGOs in international renewable energy project development

    SciTech Connect (OSTI)

    Bartholf, T.R.

    1997-12-01

    An NGO is an international term for non-government organizations, often it is used in connection with non-profit, community-based and/or voluntary business activities. To be successful in supporting energy projects, these organizations generally exhibit certain characteristics: they are familiar with the end-use requirements; they are typically neutral to the technology; they emphasize training; they do not carry a large bureacratic structure, at home or in the field; they typically can adapt to do numerous functions; they can often attract other support. The author discusses several examples of such organizations who have been highly successful. The author sees a continuing role for such groups in developing renewable energy sources in the rural setting to include: continued development of new activity in rural areas; development of institutional framework for future market activity; an increased role in managing international development activities; more direct involvement with for-profit technical and financial organizations.

  2. International petroleum statistics report, October 1997

    SciTech Connect (OSTI)

    1997-10-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1996; OECD stocks from 1973 through 1996; and OECD trade from 1986 through 1996. 4 figs., 48 tabs.

  3. International Petroleum Statistics Report, January 1994

    SciTech Connect (OSTI)

    Not Available

    1994-01-31

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, exports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade for the years 1970 through 1992; OECD stocks from 1973 through 1992; and OECD trade from 1982 through 1992.

  4. International petroleum statistics report, November 1993

    SciTech Connect (OSTI)

    Not Available

    1993-11-26

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, exports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries World oil production and OECD demand data are for the years 1970 through 1992; OECD stocks from 1973 through 1992: and OECD trade from 1982 through 1992.

  5. Foley elected ASM International Fellow

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Foley elected ASM International Fellow Foley elected ASM International Fellow James Foley is the 10th ASM Fellow from LANL. July 8, 2014 James Foley James Foley The Society...

  6. Policy Standards, Guidance and Statutes

    Broader source: Energy.gov [DOE]

    Policy Guidance and Statutes, DOE Standards, STD, Atomic Energy Act, Table, Draft DOE P, American Indian Religiuos Freedom, CERCLA, RCRA, Clean Air ACt, Clean Water Act, Emergency Planing and Community, Federal Environmental Laws, Surface Contamination Guidelines, DOE STD-1196-2011, Derived Concentration Technical Standard, ALARA, 0173T

  7. International Perspective on Fukushima Accident

    Broader source: Energy.gov [DOE]

    Presenter: Miroslav Lipár, Head, Operational Safety Section, Department of Nuclear Safety and Security, International Atomic Energy Agency

  8. Scheuco International | Open Energy Information

    Open Energy Info (EERE)

    Name: Scheuco International Place: Bielefeld, Germany Zip: 33609 Sector: Solar Product: Building envelope specialist (facade construction), including solar products. References:...

  9. International Cooperation | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    International Cooperation International Cooperation Members at a meeting of the international Carbon Sequestration Leadership Forum (CSLF). The Office of Fossil Energy is the Secretariat for the CSLF. Members at a meeting of the international Carbon Sequestration Leadership Forum (CSLF). The Office of Fossil Energy is the Secretariat for the CSLF. Key Bilateral Activities US-India Energy Dialogue: Coal Working Group The Office of Fossil Energy and India's Ministry of Coal jointly chair the Coal

  10. International Energy Program Evaluation Conference

    Broader source: Energy.gov [DOE]

    The International Energy Program Evaluation Conference (IEPEC) will be held in Long Beach, California, on Aug. 11-13, 2015.

  11. International Hydrogen Infrastructure Update Webinar

    Office of Energy Efficiency and Renewable Energy (EERE)

    Download the presentation slides from the Fuel Cell Technologies Office webinar "International Hydrogen Infrastructure Update" held on August 30, 2016.

  12. International energy outlook 1998

    SciTech Connect (OSTI)

    1998-04-01

    The International Energy Outlook 1998 (IEO98) presents an assessment by the Energy Information Administration (EIA) of the outlook for international energy markets through 2020. Projections in IEO98 are displaced according to six basic country groupings. The industrialized region includes projections for four individual countries -- the United States, Canada, Mexico, and Japan -- along with the subgroups Western Europe and Australasia (defined as Australia, New Zealand, and the US Territories). The developing countries are represented by four separate regional subgroups: developing Asia, Africa, Middle East, and Central and South America. China and India are represented in developing Asia. New to this year`s report, country-level projections are provided for Brazil -- which is represented in Central and South America. Eastern Europe and the former Soviet Union (EE/FSU) are considered as a separate country grouping. The report begins with a review of world trends in energy demand. Regional consumption projections for oil, natural gas, coal, nuclear power, and renewable energy (hydroelectricity, geothermal, wind, solar, and other renewables) are presented in five fuel chapters, with a review of the current status of each fuel on a worldwide basis. Summary tables of the IEO98 projections for world energy consumption, carbon emissions, oil production, and nuclear power generating capacity are provided in Appendix A. 88 figs., 77 tabs.

  13. Internal combustion engine

    SciTech Connect (OSTI)

    Perrin, G.; Bergmann, H.

    1984-06-12

    An externally auto-ignited four-stroke internal combustion engine which includes a combustion chamber disposed in an upper surface of a piston such that, in an upper dead-center position of the piston, the combustion chamber receives almost all of the fuel-air mixture. The combustion chamber includes a planar bottom portion and has a cross-sectional shape of a truncated cone expanding in a direction of the cylinder head. The internal combustion engine also includes a recess or depression provided in the cylinder head and disposed eccentrically with respect to a longitudinal center axis of the cylinder. The depression or recess in the cylinder head has the shape of a truncated cone expanding in a direction of the piston, with a spark plug projecting or penetrating into the recess or depression in the cylinder head. In order to enable the achievement of good combustion, increased overall engine performance, and the minimum amount of harmful components in the exhaust gases from the engine when different types of fuel are used, predetermined constructional parameters are selected with respect to the combustion chamber and recess or depression disposed above the combustion chamber as well as the disposition of the combustion chamber with respect to a longitudinal center axis of the cylinder.

  14. 1991 international petroleum encyclopedia

    SciTech Connect (OSTI)

    Not Available

    1991-01-01

    There is no other petroleum industry publication quite like the International Petroleum Encyclopedia. With a timely, accurate combination of global industry coverage and analysis, detailed statistical surveys, cutting-edge reports on technological advancements and the ever-popular atlas maps, the 1991 International Petroleum Encyclopedia is a smart buy for professionals whose business is oil and gas, as well as for those whose business is affected by the industry's trends and developments. Written by a professional staff of Oil and Gas Journal petroleum experts, the 1991 IPE gives you the all important global perspective for constructing sound business strategies for the 90's. The petroleum industry is scrambling for information that will help it survive this volitile period. This book reports on the topics in the petroleum industry the latest developments in horizontal drilling, world refining (the latest information on reformulated fuels), and predictions about the post-war Persian Gulf industry. PULS, discussions on changes in the Gulf of Mexico, developments in the LNG trade, and crude oil tanker supply/.demand curves.

  15. International petroleum transactions

    SciTech Connect (OSTI)

    Smith, E.E.; Dzienkowski, J.S.; Anderson, O.L.; Conine, G.B.; Lowe, J.S.

    1993-12-31

    This book is intended primarily as a casebook for students. However, it should not be discarded on these grounds because if compiles important materials that are useful to practitioners as their energy practices become global. The opening chapter is broad in scope and discusses NAFTA, GATT, the EC, and provides comprehensive and current statistical information on world energy resources and the pivotal role of host countries. Legal issues are analyzed in Chapter 2 which provides an excellent discussion of sovereign immunity and the act of state doctrine. Also, this chapter includes model clauses which are helpful even to a seasoned practitioner. Given that security of investment is critical to an international transaction, the book concludes its opening section with a discussion of expropriation issues. Part II is entitled Exploration, development and Production and is divided into four chapters. Using both cases and source materials, a comprehensive survey of ownership of mineral rights and concessions is presented. From a practitioner`s standpoint, Chapters 5 and 6 are important because of the inclusion of model clauses and contracts for production sharing arrangements, licenses, participation agreements, service contracts, and technology transfers. Chapter 8 deals with joint development and operations. The book concludes with three chapters on the history of the markets and international transactions involving oil and natural gas.

  16. International energy indicators

    SciTech Connect (OSTI)

    Bauer, E.K.

    1981-02-01

    Extensive data are compiled for energy on the international scene and for the US. Data are indicated from the date given and into 1980 as far as available. Data are given for the international scene on: world crude oil production, 1975-to date; Iran: crude oil capacity, production, and shut-in, 1974-to date; Saudi Arabia: crude oil capacity, production, and shut-in, 1974-to date; OPEC (Ex-Iran and Saudi Arabia): capacity, production, and shut-in, 1974-to date; oil stocks: Free World, US, Japan, and Europe (landed), 1973-to date; petroleum consumption by industrial countries, 1973-to date; USSR crude oil production, 1974-to date; Free World and US nuclear generation capacity, 1973-to date. Data are supplied specifically for the US on US gross imports of crude oil and products, 1973-to date; landed cost of Saudi crude in current and 1974 dollars; US trade in bituminous coal, 1973-to date; summary of US merchandise trade, 1976-to date; and energy/GNP ratio.

  17. International Clean Energy Coalition

    SciTech Connect (OSTI)

    Erin Skootsky; Matt Gardner; Bevan Flansburgh

    2010-09-28

    In 2003, the National Association of Regulatory Utility Commissioners (NARUC) and National Energy Technology Laboratories (NETL) collaboratively established the International Clean Energy Coalition (ICEC). The coalition consisting of energy policy-makers, technologists, and financial institutions was designed to assist developing countries in forming and supporting local approaches to greenhouse gas mitigation within the energy sector. ICEC's work focused on capacity building and clean energy deployment in countries that rely heavily on fossil-based electric generation. Under ICEC, the coalition formed a steering committee consisting of NARUC members and held a series of meetings to develop and manage the workplan and define successful outcomes for the projects. ICEC identified India as a target country for their work and completed a country assessment that helped ICEC build a framework for discussion with Indian energy decisionmakers including two follow-on in-country workshops. As of the conclusion of the project in 2010, ICEC had also conducted outreach activities conducted during United Nations Framework Convention on Climate Change (UNFCCC) Ninth Conference of Parties (COP 9) and COP 10. The broad goal of this project was to develop a coalition of decision-makers, technologists, and financial institutions to assist developing countries in implementing affordable, effective and resource appropriate technology and policy strategies to mitigate greenhouse gas emissions. Project goals were met through international forums, a country assessment, and in-country workshops. This project focused on countries that rely heavily on fossil-based electric generation.

  18. International Partnerships for the Hydrogen Economy Fact Sheet | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy The U.S. has committed $1.7 billion to implement collaborative and cooperative efforts to advance research, development and deployment of hydrogen production, storage, transport and distribution, fuel cell technologies, common codes and standards for hydrogen fuel utilization, and coordination of international efforts to develop a global hydrogen economy.

  19. INTERNAL REPAIR OF PIPELINES

    SciTech Connect (OSTI)

    Robin Gordon; Bill Bruce; Ian Harris; Dennis Harwig; George Ritter; Bill Mohr; Matt Boring; Nancy Porter; Mike Sullivan; Chris Neary

    2004-12-31

    The two broad categories of fiber-reinforced composite liner repair and deposited weld metal repair technologies were reviewed and evaluated for potential application for internal repair of gas transmission pipelines. Both are used to some extent for other applications and could be further developed for internal, local, structural repair of gas transmission pipelines. Principal conclusions from a survey of natural gas transmission industry pipeline operators can be summarized in terms of the following performance requirements for internal repair: (1) Use of internal repair is most attractive for river crossings, under other bodies of water, in difficult soil conditions, under highways, under congested intersections, and under railway crossings. (2) Internal pipe repair offers a strong potential advantage to the high cost of horizontal direct drilling when a new bore must be created to solve a leak or other problem. (3) Typical travel distances can be divided into three distinct groups: up to 305 m (1,000 ft.); between 305 m and 610 m (1,000 ft. and 2,000 ft.); and beyond 914 m (3,000 ft.). All three groups require pig-based systems. A despooled umbilical system would suffice for the first two groups which represents 81% of survey respondents. The third group would require an onboard self-contained power unit for propulsion and welding/liner repair energy needs. (4) The most common size range for 80% to 90% of operators surveyed is 508 mm (20 in.) to 762 mm (30 in.), with 95% using 558.8 mm (22 in.) pipe. Evaluation trials were conducted on pipe sections with simulated corrosion damage repaired with glass fiber-reinforced composite liners, carbon fiber-reinforced composite liners, and weld deposition. Additional un-repaired pipe sections were evaluated in the virgin condition and with simulated damage. Hydrostatic failure pressures for pipe sections repaired with glass fiber-reinforced composite liner were only marginally greater than that of pipe sections without

  20. INTERNAL REPAIR OF PIPELINES

    SciTech Connect (OSTI)

    Robin Gordon; Bill Bruce; Ian Harris; Dennis Harwig; George Ritter; Bill Mohr; Matt Boring; Nancy Porter; Mike Sullivan; Chris Neary

    2004-08-17

    The two broad categories of fiber-reinforced composite liner repair and deposited weld metal repair technologies were reviewed and evaluated for potential application for internal repair of gas transmission pipelines. Both are used to some extent for other applications and could be further developed for internal, local, structural repair of gas transmission pipelines. Principal conclusions from a survey of natural gas transmission industry pipeline operators can be summarized in terms of the following performance requirements for internal repair: (1) Use of internal repair is most attractive for river crossings, under other bodies of water, in difficult soil conditions, under highways, under congested intersections, and under railway. (2) Internal pipe repair offers a strong potential advantage to the high cost of horizontal direct drilling when a new bore must be created to solve a leak or other problem. (3) Typical travel distances can be divided into three distinct groups: up to 305 m (1,000 ft.); between 305 m and 610 m (1,000 ft. and 2,000 ft.); and beyond 914 m (3,000 ft.). All three groups require pig-based systems. A despooled umbilical system would suffice for the first two groups which represents 81% of survey respondents. The third group would require an onboard self-contained power unit for propulsion and welding/liner repair energy needs. (4) The most common size range for 80% to 90% of operators surveyed is 508 mm (20 in.) to 762 mm (30 in.), with 95% using 558.8 mm (22 in.) pipe. Evaluation trials were conducted on pipe sections with simulated corrosion damage repaired with glass fiber-reinforced composite liners, carbon fiber-reinforced composite liners, and weld deposition. Additional un-repaired pipe sections were evaluated in the virgin condition and with simulated damage. Hydrostatic failure pressures for pipe sections repaired with glass fiber-reinforced composite liner were only marginally greater than that of pipe sections without liners