National Library of Energy BETA

Sample records for internal project transfers

  1. Energy Efficiency Projects: Overcoming Internal Barriers to Implementa...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Efficiency Projects: Overcoming Internal Barriers to Implementation Energy Efficiency Projects: Overcoming Internal Barriers to Implementation This presentation discusses...

  2. Technology Transfer Expansion Planned UTCA is conducting a major project

    E-Print Network [OSTI]

    Carver, Jeffrey C.

    Technology Transfer Expansion Planned UTCA is conducting a major project to evaluate and extend its technology transfer activities (UTCA project 03217). Steven Jones and David Eckhoff of UAB are working to expand the current technology transfer program to showcase the successes of the UTCA projects. Samples

  3. Proceeding of the 1st International Forum on Heat Transfer

    E-Print Network [OSTI]

    Maruyama, Shigeo

    Proceeding of the 1st International Forum on Heat Transfer November 24-26, 2004, Kyoto, Japan Paper No. HEAT TRANSFER PROBLEMS RELATED WITH CARBON NANOTUBES BY MOLECULAR DYNAMICS-BASED SIMULATIONS Dynamics Simulation, Thermal Conductance ABSTRACT Several heat transfer problems related to single

  4. International Research Reactor Decommissioning Project

    SciTech Connect (OSTI)

    Leopando, Leonardo; Warnecke, Ernst

    2008-01-15

    Many research reactors have been or will be shut down and are candidates for decommissioning. Most of the respective countries neither have a decommissioning policy nor the required expertise and funds to effectively implement a decommissioning project. The IAEA established the Research Reactor Decommissioning Demonstration Project (R{sup 2}D{sup 2}P) to help answer this need. It was agreed to involve the Philippine Research Reactor (PRR-1) as model reactor to demonstrate 'hands-on' experience as it is just starting the decommissioning process. Other facilities may be included in the project as they fit into the scope of R{sup 2}D{sup 2}P and complement to the PRR-1 decommissioning activities. The key outcome of the R{sup 2}D{sup 2}P will be the decommissioning of the PRR-1 reactor. On the way to this final goal the preparation of safety related documents (i.e., decommissioning plan, environmental impact assessment, safety analysis report, health and safety plan, cost estimate, etc.) and the licensing process as well as the actual dismantling activities could provide a model to other countries involved in the project. It is expected that the R{sup 2}D{sup 2}P would initiate activities related to planning and funding of decommissioning activities in the participating countries if that has not yet been done.

  5. PAGES International Project Office Brenplatz 2

    E-Print Network [OSTI]

    Edwards, Thomas W.D.

    on the PAGES web site. My more immediate responsibility as the guest editor of this Stable Isotopes issuePAGES International Project Office Bärenplatz 2 CH­3011 Bern Switzerland Tel: +41 31 312 31 33 Fax: +41 31 312 31 68 pages@pages.unibe.ch Layout: Christoph Kull Circulation: 3200 ISSN 1563­0803 www.pages

  6. International projects - labor, risks, and results

    SciTech Connect (OSTI)

    Andreas, D.E.

    1996-12-31

    The attention of developers in the power industry has shifted to foreign markets. The trend has caused significant additional risks to be assumed by the developer. One of these risks is the cost and availability of local skilled labor to construct projects. Especially projects built on a fast track schedule. To mitigate this risk, many developers and contractors bring in ex-patriot labor - often at a much higher cost. This paper addresses the Centro de Energia Escuintla, a 40 MW diesel power plant completed this year in Guatemala. Local labor pools provided the majority of the labor used to build the plant. Guatemalans were hired and trained to perform operations and maintenance duties. The plant was built to international standards, and produced power on time. The techniques used to manage the project construction and startup are discussed. The key conclusion is that it is possible to build plants with local labor, as long as the appropriate supervision is brought in, that language barriers can be overcome, that construction equipment is made available, and that time for training is allocated.

  7. Rutgers Newark Oral History Project Intern Job Description

    E-Print Network [OSTI]

    Delgado, Mauricio

    uses cutting-edge technology to bring groundbreaking oral history collections to a worldwide audienceRutgers Newark Oral History Project Intern Job Description The Rutgers Newark Oral History Project-American Oral History Collection. Interns will be trained on the InterClipper software program to segment

  8. Fuel transfer system ALARA design review - Project A.15

    SciTech Connect (OSTI)

    KUEBERTH, L.R.

    2001-11-12

    One mission of the Spent Nuclear Fuel (SNF) Project is to move the SNF from the K Basins in the Hanford 100K Area to an interim dry storage at the Canister Storage Building (CSB) in the Hanford 200 East Area. The Fuel Transfer System (FTS) is a subproject that will move the SNF from the 105K East (KE) Facility to the 105K West (KW) Facility. The SNF will be treated for shipment to the Cold Vacuum Drying (CVD) facility at the KW Basin. The SNF canisters will be loaded underwater into a Shielded Transfer Cask (STC) in the KE Basin. The fully loaded STC will be brought out of the water and placed into a Cask Transfer Overpack (CTO) by the STC Straddle Carrier. As the STC is removed from the water, it will be washed down with demineralized water by an manual rinse system. The CTO with the STC inside will be placed on a transport trailer and transferred to the KW Basin as an intra-facility transfer. The CTO will be unloaded from the shipping trailer at the KW Basin and the STC will be removed from the CTO. The STC will then be lowered into the KW Basin water and the fuel will be removed. The SNF will then be processed for shipment to the CVD. As soon as all of the fuel has been removed from the STC, the cask will be removed from the KW Basin water and placed into the CTO. The CTO will again be placed on the trailer for transport back to the KE Basin where the entire cycle will be repeated approximately 400 times. This document records the As Low As Reasonably Achievable (ALARA) findings and design recommendations/requirements by the SNF Project noted during the Final Design Review of the STC, CTO, STC Transfer System, Annexes and Roadways for support of FTS. This document is structured so that all statements that include the word ''shall'' represent design features that have been or will be implemented within the project scope. Statements that include the words ''should'' or ''recommend'' represent ALARA design features to be evaluated for future implementation.

  9. Overseas projects finance by international institutions for Japanese construction firms

    E-Print Network [OSTI]

    Kojima, Masashi, 1968-

    2004-01-01

    This thesis analyzes the relationships between Japanese construction firms, and overseas projects financed by international institutions, such as the World Bank Group, United Nations, ADB, IDB, JBIC, and JICA. Japanese ...

  10. Research Projects > Research Services > Technology Transfer Cover: Electromagnetic Collapse of Metallic Cylinders

    E-Print Network [OSTI]

    Adler, Joan

    Research Projects > Research Services > Technology Transfer INDUSTRY GUIDE TO TECHNION #12;Cover > Research Services > Technology Transfer Produced by Technion Research and Development Foundation (TRDF Technology Transfer 25 Technion Technology Transfer (T3 ) 30 Alfred Mann Institute at the Technion (AMIT) 31

  11. Project Summary for Small Business Technology Transfer (STTR) Phase II Proposal

    E-Print Network [OSTI]

    Oh, JungHwan

    Project Summary for Small Business Technology Transfer (STTR) Phase II Proposal Title: Real-time Analysis and Feedback during Colonoscopy to improve Quality This Small Business Technology Transfer Phase

  12. Project Profile: Dual-Purpose Heat Transfer Fluids for CSP

    Broader source: Energy.gov [DOE]

    Argonne National Laboratory, under an ARRA CSP Award, is developing advanced heat transfer fluids (HTFs) by incorporating multifunctional engineered nanoparticles in heat transfer applications and thermal energy storage.

  13. International Partnerships and Projects | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels Data Center HomeVehicle Replacement U.S.Job& Projects » Initiatives

  14. An Overview of the International Reactor Physics Experiment Evaluation Project

    SciTech Connect (OSTI)

    Briggs, J. Blair; Gulliford, Jim

    2014-10-09

    Interest in high-quality integral benchmark data is increasing as efforts to quantify and reduce calculational uncertainties associated with advanced modeling and simulation accelerate to meet the demands of next generation reactor and advanced fuel cycle concepts. Two Organization for Economic Cooperation and Development (OECD) Nuclear Energy Agency (NEA) activities, the International Criticality Safety Benchmark Evaluation Project (ICSBEP), initiated in 1992, and the International Reactor Physics Experiment Evaluation Project (IRPhEP), initiated in 2003, have been identifying existing integral experiment data, evaluating those data, and providing integral benchmark specifications for methods and data validation for nearly two decades. Data provided by those two projects will be of use to the international reactor physics, criticality safety, and nuclear data communities for future decades. An overview of the IRPhEP and a brief update of the ICSBEP are provided in this paper.

  15. The role of immigrant scientists and entrepreneurs in international technology transfer

    E-Print Network [OSTI]

    Kerr, William Robert, Ph. D. Massachusetts Institute of Technology

    2005-01-01

    This thesis characterizes the important role of US ethnic scientists and entrepreneurs for international technology diffusion. Chapter 1 studies the transfer of tacit knowledge regarding new innovations through ethnic ...

  16. Technical benefit of an international project

    SciTech Connect (OSTI)

    Flanagan, C.A.

    1985-01-01

    One critical issue examined in the present phase of the International Tokamak Reactor (INTOR) has been an evaluation of the technical benefit of dividing up the design and component production tasks of all major advanced technologies among all participants. Two approaches were evaluated: (1) a ''splitting'' approach in which each country provides 1/4 of the components of each major system (e.g., 3 of 12 TF coils), (2) a ''branching'' approach in which each country provides all components of selected major systems (e.g., first country provides all TF coils, second country provides all torus sectors, etc.). Quantitative cost and schedule estimates were developed for each of the two approaches and compared to the cost and schedule of the entire device if it were produced only by one country. The results of the US evaluation indicated that the ratio of total estimated cost to the ''national'' cost was 1.66 for ''splitting'' and 1.20 for ''branching''. The cost per participant was 0.41 and 0.30, respectively. The increase in the construction schedule was estimated to be 2.6 years.

  17. INTEGRAL BENCHMARKS AVAILABLE THROUGH THE INTERNATIONAL REACTOR PHYSICS EXPERIMENT EVALUATION PROJECT AND THE INTERNATIONAL CRITICALITY SAFETY BENCHMARK EVALUATION PROJECT

    SciTech Connect (OSTI)

    J. Blair Briggs; Lori Scott; Enrico Sartori; Yolanda Rugama

    2008-09-01

    Interest in high-quality integral benchmark data is increasing as efforts to quantify and reduce calculational uncertainties accelerate to meet the demands of next generation reactor and advanced fuel cycle concepts. The International Reactor Physics Experiment Evaluation Project (IRPhEP) and the International Criticality Safety Benchmark Evaluation Project (ICSBEP) continue to expand their efforts and broaden their scope to identify, evaluate, and provide integral benchmark data for method and data validation. Benchmark model specifications provided by these two projects are used heavily by the international reactor physics, nuclear data, and criticality safety communities. Thus far, 14 countries have contributed to the IRPhEP, and 20 have contributed to the ICSBEP. The status of the IRPhEP and ICSBEP is discussed in this paper, and the future of the two projects is outlined and discussed. Selected benchmarks that have been added to the IRPhEP and ICSBEP handbooks since PHYSOR’06 are highlighted, and the future of the two projects is discussed.

  18. CERNA WORKING PAPER SERIES Innovation and international technology transfer

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    for producing solar PV, without deploying PV systems in its territory. This case suggests that technology of international patent data at a detailed technology level with field interviews of ten Chinese PV companies. We show that Chinese producers have acquired the technologies and skills necessary to produce PV products

  19. Project Profile: High Operating Temperature Liquid Metal Heat Transfer

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative FuelsofProgram: Report Appendices |Project Management Project ManagementProjectFluids

  20. Project Profile: Polyaromatic Naphthalene Derivatives as Solar Heat Transfer Fluids

    Office of Energy Efficiency and Renewable Energy (EERE)

    Oak Ridge National Laboratory, under an ARRA CSP Award, is addressing the need for heat transfer fluids (HTFs) for solar power generation that are stable to temperatures approaching 600°C, have good thermal characteristics, and do not react with the vessels in which they are contained.

  1. International Conference on Heat Transfer, Fluid Mechanics, and Thermodynamics 8-10 April 2002, Kruger Park, South Africa

    E-Print Network [OSTI]

    Kandlikar, Satish

    HEFAT2002 1st International Conference on Heat Transfer, Fluid Mechanics, and Thermodynamics 8 topic in heat transfer. The power dissipation of the computer chips is rapidly increasing. The thermal management of these high power systems provides a complex challenge. Unfortunately, the heat transfer area

  2. EVALUATION OF INTERNATIONAL SATELLITE CLOUD CLIMATOLOGY PROJECT (ISCCP) D2 CLOUD AMOUNT CHANGES AND THEIR CONNECTIONS

    E-Print Network [OSTI]

    Schubert, Wayne H.

    EVALUATION OF INTERNATIONAL SATELLITE CLOUD CLIMATOLOGY PROJECT (ISCCP) D2 CLOUD AMOUNT CHANGES #12;ii #12;iii ABSTRACT EVALUATION OF INTERNATIONAL SATELLITE CLOUD CLIMATOLOGY PROJECT (ISCCP) D2 Climatology Project (ISCCP) D2 dataset exhibits a 2.6% per decade decrease in the global all-cloud cloud

  3. Engagement by U.S. University Groups With International Linear Collider R&D Projects

    E-Print Network [OSTI]

    Gollin, George

    1 Engagement by U.S. University Groups With International Linear Collider R&D Projects A report's level of engagement with research leading towards the International Linear Collider. We did

  4. The ALTCRISS project on board the International Space Station

    E-Print Network [OSTI]

    M. Casolino; F. Altamura; M. Minori; P. Picozza; C. Fuglesang; A. Galper; A. Popov; V. Benghin; V. M. Petrov; A. Nagamatsu; T. Berger; G. Reitz; M. Durante; M. Pugliese; V. Roca; L. Sihver F. Cucinotta; E. Semones; M. Shavers; V. Guarnieri; C. Lobascio; D. Castagnolo; R. Fortezza

    2007-08-20

    The Altcriss project aims to perform a long term survey of the radiation environment on board the International Space Station. Measurements are being performed with active and passive devices in different locations and orientations of the Russian segment of the station. The goal is to perform a detailed evaluation of the differences in particle fluence and nuclear composition due to different shielding material and attitude of the station. The Sileye-3/Alteino detector is used to identify nuclei up to Iron in the energy range above 60 MeV/n. Several passive dosimeters (TLDs, CR39) are also placed in the same location of Sileye-3 detector. Polyethylene shielding is periodically interposed in front of the detectors to evaluate the effectiveness of shielding on the nuclear component of the cosmic radiation. The project was submitted to ESA in reply to the AO in the Life and Physical Science of 2004 and data taking began in December 2005. Dosimeters and data cards are rotated every six months: up to now three launches of dosimeters and data cards have been performed and have been returned with the end of expedition 12 and 13.

  5. The ALTCRISS project on board the International Space Station

    E-Print Network [OSTI]

    Casolino, M; Minori, M; Picozza, P; Fuglesang, C; Galper, A; Popov, A; Benghin, V; Petrov, V M; Nagamatsu, A; Berger, T; Reitz, G; Durante, M; Pugliese, M; Roca, V; Cucinotta, L Sihver F; Semones, E; Shavers, M; Guarnieri, V; Lobascio, C; Castagnolo, D; Fortezza, R

    2007-01-01

    The Altcriss project aims to perform a long term survey of the radiation environment on board the International Space Station. Measurements are being performed with active and passive devices in different locations and orientations of the Russian segment of the station. The goal is to perform a detailed evaluation of the differences in particle fluence and nuclear composition due to different shielding material and attitude of the station. The Sileye-3/Alteino detector is used to identify nuclei up to Iron in the energy range above 60 MeV/n. Several passive dosimeters (TLDs, CR39) are also placed in the same location of Sileye-3 detector. Polyethylene shielding is periodically interposed in front of the detectors to evaluate the effectiveness of shielding on the nuclear component of the cosmic radiation. The project was submitted to ESA in reply to the AO in the Life and Physical Science of 2004 and data taking began in December 2005. Dosimeters and data cards are rotated every six months: up to now three lau...

  6. Project W-314 sn-634 transfer line a-b to ax-b acceptance for beneficial use

    SciTech Connect (OSTI)

    Warnick, T. L.

    1997-09-29

    Program/Project Title: Project W-314, Tank Farm Restoration and Safe Operation, Phase I Component/System: SN-630 Transfer Line (AZ-02A to AN-B) September 15, 1997.

  7. International energy outlook 1997 with projections to 2015

    SciTech Connect (OSTI)

    1997-04-01

    The International Energy Outlook 1997 (IE097) presents an assessment by the Energy Information Administration (EIA) of the outlook for international energy markets through 2015.

  8. Experimental study of gas turbine blade film cooling and internal turbulated heat transfer at large Reynolds numbers 

    E-Print Network [OSTI]

    Mhetras, Shantanu

    2009-06-02

    superposition of effectiveness data from individual rows are comparable with that from full coverage film cooling. Internal heat transfer measurements are also performed in a high aspect ratio channel and from jet array impingement on a turbulated target wall...

  9. Desired Competencies of Employees on International Agricultural Development Projects as Indicated by Project Managers: A Qualitative Study 

    E-Print Network [OSTI]

    Sandlin, M'Randa Ruth

    2011-08-08

    International agricultural development institutions previously hired employees based on their technical expertise, and, with little to no formal training in development, were sent to live abroad with one goal: implement the project. Since...

  10. The Daily Princetonian -International fusion project will use Princeton physics lab Summer Program

    E-Print Network [OSTI]

    to determine the viability of exploiting cold fusion as an energy source around the world. Much of the researchThe Daily Princetonian - International fusion project will use Princeton physics lab Summer Program | Previous | Next | Calendar International fusion project will use Princeton physics lab By ABBY WILLIAMS

  11. SLUDGE TREATMENT PROJECT ENGINEERED CONTAINER RETRIEVAL AND TRANSFER SYSTEM PRELIMINARY DESIGN HAZARD ANALYSIS SUPPLEMENT 1

    SciTech Connect (OSTI)

    FRANZ GR; MEICHLE RH

    2011-07-18

    This 'What/If' Hazards Analysis addresses hazards affecting the Sludge Treatment Project Engineered Container Retrieval and Transfer System (ECRTS) NPH and external events at the preliminary design stage. In addition, the hazards of the operation sequence steps for the mechanical handling operations in preparation of Sludge Transport and Storage Container (STSC), disconnect STSC and prepare STSC and Sludge Transport System (STS) for shipping are addressed.

  12. US/China Energy and Environmental Technology Center (EETC) international business development and technology transfer

    SciTech Connect (OSTI)

    Hsieh, S.T. [Tulane Univ., New Orleans, LA (United States). US/China Inst.; Atwood, T. [Dept. of Energy, Washington, DC (United States); Qiu Daxiong [Tsinghua Univ., Beijing (China); Zhang Guocheng [State Science and Technology Commission, Beijing (China)

    1997-12-31

    Since January 1997, the US/China Energy and Environmental Technology Center (EETC) in Beijing has been jointly operated by Tulane University and Tsinghua University. EETC is established to encourage the adoption of technologies for energy production with improved environmental performance which are essential for supporting economic growth and managing the Global Warming and Climate Change issues. International cooperation is critical to insure the environmental and energy security on a global basis. For example, the US has acquired a great deal of useful experience in clean coal technology which has been demonstrated with major utilities in commercial operations. The adaption of, and the installation of, clean coal technology should be given high priority. Worldwide, the continuous exchange of information and technology between developed and developing nations relating to the current and future clean coal technologies is of great importance. Developed nations which possess environmental responsive technologies and financial resources should work closely with developing nations to facilitate technology transfer and trade of technologies. International cooperation will lower the cost of deploying clean coal technologies directed toward the clean production of energy. This paper presents the updated activities of EETC on facilitating technology transfer and promoting the clean use of coal to satisfy growing energy demand in China.

  13. Effective Project Management Office Processes and Technology Transfer: Implementation of an Avaya Voice Over Internet Protocol Telephony System in Mexico

    E-Print Network [OSTI]

    Perez, Mary Louise

    2012-08-31

    Management Institute, Inc. (PMI) to implement Information Technology (IT) projects and to transfer technology know how knowledge to its subsidiary in Mexico. To answer this question, an assessment of Cisco and Avaya VoIP telephony systems was completed...

  14. International Joint Research Project "Physical Violence and State Legitimacy in Late Socialism"

    E-Print Network [OSTI]

    Schubart, Christoph

    International Joint Research Project "Physical Violence and State Legitimacy in Late Socialism Regensburg Beyond Systemic Divides: Experience and Remembrance of Physical Violence in Soviet and post and the SAP Kosovo Robert Luci, ZZF Potsdam Printing t

  15. Time-dependent Radiation Transfer in the Internal Shock Model Scenario for Blazar Jets

    E-Print Network [OSTI]

    Manasvita Joshi; Markus Boettcher

    2010-11-13

    We describe the time-dependent radiation transfer in blazar jets, within the internal shock model. We assume that the central engine, which consists of a black hole and an accretion disk, spews out relativistic shells of plasma with different velocity, mass, and energy. We consider a single inelastic collision between a faster (inner) and a slower (outer) moving shell. We study the dynamics of the collision and evaluate the subsequent emission of radiation via the synchrotron and synchrotron self Compton (SSC) processes after the interaction between the two shells has begun. The collision results in the formation of a forward shock (FS) and a reverse shock (RS) that convert the ordered bulk kinetic energy of the shells into magnetic field energy and accelerate the particles, which then radiate. We assume a cylindrical geometry for the emission region of the jet. We treat the self-consistent radiative transfer by taking into account the inhomogeneity in the photon density throughout the region. In this paper, we focus on understanding the effects of varying relevant input parameters on the simulated spectral energy distribution (SED) and spectral variability patterns.

  16. Leading change management projects in international cross-cultural settings

    E-Print Network [OSTI]

    Repoux, Charles

    2014-01-01

    In an increasingly complex world for Multinational Companies, it is difficult for managers to keep a firm grasp over the global projects they are tasked to implement. Many of them lead teams operating across country borders, ...

  17. The 6th International Symposium on Gas Transfer at Water Surfaces Kyoto, Japan, May 17-21, 2010

    E-Print Network [OSTI]

    Garbe, Christoph S.

    The 6th International Symposium on Gas Transfer at Water Surfaces Kyoto, Japan, May 17-21, 2010 A new approach for 3C3D measurements of aqueous boundary layer ows relative to the wind-wave undulated thermographic images of the air-water interface show coherent pat- terns, probably generated by Langmuir

  18. Direct Monte Carlo simulation of chemical reaction systems: Internal energy transfer and an energy-dependent unimolecular reaction

    E-Print Network [OSTI]

    Anderson, James B.

    Direct Monte Carlo simulation of chemical reaction systems: Internal energy transfer and an energy a direct Monte Carlo simulation of an energy-dependent t&molecular reaction system of the type A+ B simulation of a unimo- lecular reaction with an energy-dependent rate constant k3 and with explicit treatment

  19. Page 1 of 1 Internal Billing and Non-Salary Cost Transfers Using Journal Entry Tool (JET)

    E-Print Network [OSTI]

    Bohnhoff, David

    Page 1 of 1 Internal Billing and Non-Salary Cost Transfers Using Journal Entry Tool (JET) JET loading the file to JET. · Cell Format: Please use upper case for alpha letters used in the funding codes file named "JET Excel File Layout". #12;

  20. 100kW Energy Transfer Multiplexer Power Converter Prototype Development Project

    SciTech Connect (OSTI)

    S. Merrill Skeist; Richard H. (Dick) Baker; Anthony G.P. Marini; DOE Project Officer - Keith Bennett

    2006-03-21

    Project Final Report for "100kW Energy Transfer Multiplexer Power Converter Prototype Development Project" prepared under DOE grant number DE-FG36-03GO13138. This project relates to the further development and prototype construction/evaluation for the Energy Transfer Multiplexer (ETM) power converter topology concept. The ETM uses a series resonant link to transfer energy from any phase of a multiphase input to any phase of a multiphase output, converting any input voltage and frequency to any output voltage and frequency. The basic form of the ETM converter consists of an eight (8)-switch matrix (six phase power switches and two ground power switches) and a series L-C resonant circuit. Electronic control of the switches allows energy to be transferred in the proper amount from any phase to any other phase. Depending upon the final circuit application, the switches may be either SCRs or IGBTs. The inherent characteristics of the ETM converter include the following: Power processing in either direction (bidirectional); Large voltage gain without the need of low frequency magnetics; High efficiency independent of output load and frequency; Wide bandwidth with fast transient response and; Operation as a current source. The ETM is able to synthesize true sinusoidal waveforms with low harmonic distortions. For a low power PM wind generation system, the ETM has the following characteristics and advantages: It provides voltage gain without the need of low frequency magnetics (DC inductors) and; It has constant high efficiency independent of the load. The ETM converter can be implemented into a PM wind power system with smaller size, reduced weight and lower cost. As a result of our analyses, the ETM offers wind power generation technology for the reduction of the cost and size as well as the increase in performance of low power, low wind speed power generation. This project is the further theoretical/analytical exploration of the ETM converter concept in relationship to PM wind power generator applications in the 100kW and under power range. The theoretical/analytical and bench scale work focuses on simplifying the basic ETM converter topology (in terms of parts count and complexity) for the specific application of the low power PM system. The project goals and objectives were for Spellman HV will develop a 100kW prototype ETM power converter based on paralleled lower ratings converters. The proposed configuration of this prototype is a 100kW rated converter comprised of four (4) 34kW rated modules connected in parallel (the fourth converter is included to demonstrate N+1 fault tolerance). This approach is more viable as there is lower technological risk involved in developing a 34kW-rated converter than a single 100kW unit. The modular system approach should have a lower deployment and service cost over a single unit system, because of the economics of scale (smaller units at a higher volume means lower manufacturing cost) and because of improved serviceability (a non-redundant power system with one failed module will still operate at a lower power level). There is also the added benefit that greater commercial application and acceptance should be achieved by having a modular system available in which fault tolerance (N+1 or 2N) is a feature. This modular approach would allow the output power to be increased by adding more paralleled converters. Thus, the maximum output power of the overall power system is a function of the interconnection medium (the hot swap connection subsystem), rather than the ratings of a single module. The project was implemented with Spellman HV acting as the program management and production assembly and test facility; The Baker Company acting as a technical consultant and resource when required; and dtm Associates acting as the design/development resource for the hardware development of the 100kW ETM converter prototype.

  1. International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics 14 16 July 2014

    E-Print Network [OSTI]

    Ghajar, Afshin J.

    pipe systems. To explore and enhance the general understanding of heat transfer in non-boiling two in inclination of the pipe in downward direction causes the two phase heat transfer coefficient to decrease in the heat transfer in two phase air-water flow when pipe is inclined slightly upward from the near

  2. International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics 14 16 July 2014

    E-Print Network [OSTI]

    Ghajar, Afshin J.

    . The current experiments analyses the two phase heat transfer in a pipe of diameter 12.5 mm and the results experiments show that the heat transfer coefficient also depends on the pipe diameter along with flow pattern and pipe inclination. The experimental data from these investigations can be used to develop heat transfer

  3. Advance information on forthcoming market surveys and calls for tenders expected to exceed 200 000 Swiss francs and technology transfer projects

    E-Print Network [OSTI]

    2010-01-01

    Advance information on forthcoming market surveys and calls for tenders expected to exceed 200 000 Swiss francs and technology transfer projects

  4. The Polarized Electron Source for the International Collider (ILC) Project

    SciTech Connect (OSTI)

    Brachmann, A.; Clendenin, J.E.; Garwin, E.L.; Ioakeimidi, K.; Kirby, R.e.; Maruyama, T.; Prescott, C.Y.; Sheppard, J.; Turner, J.; Zhou, F.; /SLAC

    2006-12-01

    ILC project will be the next large high energy physics tool that will use polarized electrons (and positrons). For this machine spin physics will play an important role. The polarized electron source design is based on electron injectors built for the Stanford Linear Collider (polarized) and Tesla Test Facility (un-polarized). The ILC polarized electron source will provide a 5GeV spin polarized electron beam for injection into the ILC damping ring. Although most ILC machine parameters have been achieved by the SLC or TTF source, features of both must be integrated into one design. The bunch train structure presents unique challenges to the source laser drive system. A suitable laser system has not yet been demonstrated and is part of the ongoing R&D program for ILC at SLAC. Furthermore, ILC injector R&D incorporates photocathode development, increasing available polarization, and improving operational properties in gun vacuum systems. Another important area of research and development is advancing the design of DC and RF electron gun technology for polarized sources. This presentation presents the current status of the design and outlines aspects of the relevant R&D program carried out within the ILC community.

  5. 3D CFD ELECTROCHEMICAL AND HEAT TRANSFER MODEL OF AN INTERNALLY MANIFOLDED SOLID OXIDE ELECTROLYSIS CELL

    SciTech Connect (OSTI)

    Grant L. Hawkes; James E. O'Brien; Greg Tao

    2011-11-01

    A three-dimensional computational fluid dynamics (CFD) electrochemical model has been created to model high-temperature electrolysis cell performance and steam electrolysis in an internally manifolded planar solid oxide electrolysis cell (SOEC) stack. This design is being evaluated at the Idaho National Laboratory for hydrogen production from nuclear power and process heat. Mass, momentum, energy, and species conservation and transport are provided via the core features of the commercial CFD code FLUENT. A solid-oxide fuel cell (SOFC) model adds the electrochemical reactions and loss mechanisms and computation of the electric field throughout the cell. The FLUENT SOFC user-defined subroutine was modified for this work to allow for operation in the SOEC mode. Model results provide detailed profiles of temperature, operating potential, steam-electrode gas composition, oxygen-electrode gas composition, current density and hydrogen production over a range of stack operating conditions. Single-cell and five-cell results will be presented. Flow distribution through both models is discussed. Flow enters from the bottom, distributes through the inlet plenum, flows across the cells, gathers in the outlet plenum and flows downward making an upside-down ''U'' shaped flow pattern. Flow and concentration variations exist downstream of the inlet holes. Predicted mean outlet hydrogen and steam concentrations vary linearly with current density, as expected. Effects of variations in operating temperature, gas flow rate, oxygen-electrode and steam-electrode current density, and contact resistance from the base case are presented. Contour plots of local electrolyte temperature, current density, and Nernst potential indicate the effects of heat transfer, reaction cooling/heating, and change in local gas composition. Results are discussed for using this design in the electrolysis mode. Discussion of thermal neutral voltage, enthalpy of reaction, hydrogen production, cell thermal efficiency, cell electrical efficiency, and Gibbs free energy are discussed and reported herein.

  6. The 6th International Symposium on Gas Transfer at Water Surfaces Kyoto, Japan, May 17-21, 2010

    E-Print Network [OSTI]

    Garbe, Christoph S.

    .Schimpf,Christoph.Garbe,Bernd.Jähne}@iwr.uni-heidelberg.de The impact of wind, rain, and surface slicks on the transport of heat and gas at the water surfaceThe 6th International Symposium on Gas Transfer at Water Surfaces Kyoto, Japan, May 17-21, 2010 Combined Visualization of Wind Waves and Water Surface Temperature R. Rocholz1 , U. Schimpf1 , C. S. Garbe1

  7. ''Heat Transfer at the Mold-Metal Interface in Permanent Mold Casting of Aluminum Alloys'' Final Project Report

    SciTech Connect (OSTI)

    Professor R. D. Pehlke, Principal Investigator, Dr. John M. Cookson, Dr. Shouwei Hao, Dr. Prasad Krishna, Kevin T. Bilkey

    2001-12-14

    This project on heat transfer coefficients in metal permanent mold casting has been conducted in three areas. They are the theoretical study at the University of Michigan, the experimental investigation of squeeze casting at CMI-Tech Center (Now Hayes-Lemmerz Technical Center) and the experimental investigation of low pressure permanent mold casting at Amcast Automotive.

  8. SLUDGE TREATMENT PROJECT ENGINEERED CONTAINER RETRIEVAL AND TRANSFER SYSTEM PRELMINARY DESIGN HAZARD AND OPERABILITY STUDY

    SciTech Connect (OSTI)

    CARRO CA

    2011-07-15

    This Hazard and Operability (HAZOP) study addresses the Sludge Treatment Project (STP) Engineered Container Retrieval and Transfer System (ECRTS) preliminary design for retrieving sludge from underwater engineered containers located in the 105-K West (KW) Basin, transferring the sludge as a sludge-water slurry (hereafter referred to as 'slurry') to a Sludge Transport and Storage Container (STSC) located in a Modified KW Basin Annex, and preparing the STSC for transport to T Plant using the Sludge Transport System (STS). There are six, underwater engineered containers located in the KW Basin that, at the time of sludge retrieval, will contain an estimated volume of 5.2 m{sup 3} of KW Basin floor and pit sludge, 18.4 m{sup 3} of 105-K East (KE) Basin floor, pit, and canister sludge, and 3.5 m{sup 3} of settler tank sludge. The KE and KW Basin sludge consists of fuel corrosion products (including metallic uranium, and fission and activation products), small fuel fragments, iron and aluminum oxide, sand, dirt, operational debris, and biological debris. The settler tank sludge consists of sludge generated by the washing of KE and KW Basin fuel in the Primary Clean Machine. A detailed description of the origin of sludge and its chemical and physical characteristics can be found in HNF-41051, Preliminary STP Container and Settler Sludge Process System Description and Material Balance. In summary, the ECRTS retrieves sludge from the engineered containers and hydraulically transfers it as a slurry into an STSC positioned within a trailer-mounted STS cask located in a Modified KW Basin Annex. The slurry is allowed to settle within the STSC to concentrate the solids and clarify the supernate. After a prescribed settling period the supernate is decanted. The decanted supernate is filtered through a sand filter and returned to the basin. Subsequent batches of slurry are added to the STSC, settled, and excess supernate removed until the prescribed quantity of sludge is collected. The sand filter is then backwashed into the STSC. The STSC and STS cask are then inerted and transported to T Plant.

  9. Growth and Expansion of the International Criticality Safety Benchmark Evaluation Project and the Newly Organized International Reactor Physics Experiment Evaluation Project

    SciTech Connect (OSTI)

    J. Blair Briggs; Lori Scott; Yolanda Rugama; Enrico Satori

    2007-05-01

    Since ICNC 2003, the International Criticality Safety Benchmark Evaluation Project (ICSBEP) has continued to expand its efforts and broaden its scope. Criticality-alarm / shielding type benchmarks and fundamental physics measurements that are relevant to criticality safety applications are not only included in the scope of the project, but benchmark data are also included in the latest version of the handbook. A considerable number of improvements have been made to the searchable database, DICE and the criticality-alarm / shielding benchmarks and fundamental physics measurements have been included in the database. There were 12 countries participating on the ICSBEP in 2003. That number has increased to 18 with recent contributions of data and/or resources from Brazil, Czech Republic, Poland, India, Canada, and China. South Africa, Germany, Argentina, and Australia have been invited to participate. Since ICNC 2003, the contents of the “International Handbook of Evaluated Criticality Safety Benchmark Experiments” have increased from 350 evaluations (28,000 pages) containing benchmark specifications for 3070 critical or subcritical configurations to 442 evaluations (over 38,000 pages) containing benchmark specifications for 3957 critical or subcritical configurations, 23 criticality-alarm-placement / shielding configurations with multiple dose points for each, and 20 configurations that have been categorized as fundamental physics measurements that are relevant to criticality safety applications in the 2006 Edition of the ICSBEP Handbook. Approximately 30 new evaluations and 250 additional configurations are expected to be added to the 2007 Edition of the Handbook. Since ICNC 2003, a reactor physics counterpart to the ICSBEP, The International Reactor Physics Experiment Evaluation Project (IRPhEP) was initiated. Beginning in 1999, the IRPhEP was conducted as a pilot activity by the by the Organization of Economic Cooperation and Development (OECD) Nuclear Energy Agency (NEA) Nuclear Science Committee (NSC). The project was endorsed as an official activity of the NSC in June of 2003. The IRPhEP is patterned after its predecessor, the ICSBEP, but focuses on other integral measurements such as buckling, spectral characteristics, reactivity effects, reactivity coefficients, kinetics measurements, reaction-rate and power distributions, nuclide compositions and other miscellaneous types of measurements in addition to the critical configuration. The two projects are closely coordinated to avoid duplication of effort and to leverage limited resources to achieve a common goal. The purpose of the IRPhEP is to provide an extensively peer reviewed set of reactor physics related integral benchmark data that can be used by reactor designers and safety analysts to validate the analytical tools used to design next generation reactors and establish the safety basis for operation of these reactors. While coordination and administration of the IRPhEP takes place at an international level, each participating country is responsible for the administration, technical direction, and priorities of the project within their respective countries. The work of the IRPhEP is documented in an OECD NEA Handbook entitled, “International Handbook of Evaluated Reactor Physics Benchmark Experiments.” The first edition of this Handbook, the 2006 Edition spans over 2000 pages and contains data from 16 different experimental series that were

  10. Transferability of Data Related to the Underground Test Area Project, Nevada Test Site, Nye County, Nevada: Revision 0

    SciTech Connect (OSTI)

    Stoller-Navarro Joint Venture

    2004-06-24

    This document is the collaborative effort of the members of an ad hoc subcommittee of the Underground Test Area (UGTA) Technical Working Group (TWG). The UGTA Project relies on data from a variety of sources; therefore, a process is needed to identify relevant factors for determining whether material-property data collected from other areas can be used to support groundwater flow, radionuclide transport, and other models within a Corrective Action Unit (CAU), and for documenting the data transfer decision and process. This document describes the overall data transfer process. Separate Parameter Descriptions will be prepared that provide information for selected specific parameters as determined by the U.S. Department of Energy (DOE) UGTA Project Manager. This document and its accompanying appendices do not provide the specific criteria to be used for transfer of data for specific uses. Rather, the criteria will be established by separate parameter-specific and model-specific Data Transfer Protocols. The CAU Data Documentation Packages and data analysis reports will apply the protocols and provide or reference a document with the data transfer evaluations and decisions.

  11. Joint nuclear safety research projects between the US and Russian Federation International Nuclear Safety Centers

    SciTech Connect (OSTI)

    Bougaenko, S.E.; Kraev, A.E. [International Nuclear Safety Center of the Russian MINATOM, Moscow (Russian Federation); Hill, D.L.; Braun, J.C.; Klickman, A.E. [Argonne National Lab., IL (United States). International Nuclear Safety Center

    1998-08-01

    The Russian Federation Ministry for Atomic Energy (MINATOM) and the US Department of Energy (USDOE) formed international Nuclear Safety Centers in October 1995 and July 1996, respectively, to collaborate on nuclear safety research. Since January 1997, the two centers have initiated the following nine joint research projects: (1) INSC web servers and databases; (2) Material properties measurement and assessment; (3) Coupled codes: Neutronic, thermal-hydraulic, mechanical and other; (4) Severe accident management for Soviet-designed reactors; (5) Transient management and advanced control; (6) Survey of relevant nuclear safety research facilities in the Russian Federation; (8) Advanced structural analysis; and (9) Development of a nuclear safety research and development plan for MINATOM. The joint projects were selected on the basis of recommendations from two groups of experts convened by NEA and from evaluations of safety impact, cost, and deployment potential. The paper summarizes the projects, including the long-term goals, the implementing strategy and some recent accomplishments for each project.

  12. GROWTH OF THE INTERNATIONAL CRITICALITY SAFETY AND REACTOR PHYSICS EXPERIMENT EVALUATION PROJECTS

    SciTech Connect (OSTI)

    J. Blair Briggs; John D. Bess; Jim Gulliford

    2011-09-01

    Since the International Conference on Nuclear Criticality Safety (ICNC) 2007, the International Criticality Safety Benchmark Evaluation Project (ICSBEP) and the International Reactor Physics Experiment Evaluation Project (IRPhEP) have continued to expand their efforts and broaden their scope. Eighteen countries participated on the ICSBEP in 2007. Now, there are 20, with recent contributions from Sweden and Argentina. The IRPhEP has also expanded from eight contributing countries in 2007 to 16 in 2011. Since ICNC 2007, the contents of the 'International Handbook of Evaluated Criticality Safety Benchmark Experiments1' have increased from 442 evaluations (38000 pages), containing benchmark specifications for 3955 critical or subcritical configurations to 516 evaluations (nearly 55000 pages), containing benchmark specifications for 4405 critical or subcritical configurations in the 2010 Edition of the ICSBEP Handbook. The contents of the Handbook have also increased from 21 to 24 criticality-alarm-placement/shielding configurations with multiple dose points for each, and from 20 to 200 configurations categorized as fundamental physics measurements relevant to criticality safety applications. Approximately 25 new evaluations and 150 additional configurations are expected to be added to the 2011 edition of the Handbook. Since ICNC 2007, the contents of the 'International Handbook of Evaluated Reactor Physics Benchmark Experiments2' have increased from 16 different experimental series that were performed at 12 different reactor facilities to 53 experimental series that were performed at 30 different reactor facilities in the 2011 edition of the Handbook. Considerable effort has also been made to improve the functionality of the searchable database, DICE (Database for the International Criticality Benchmark Evaluation Project) and verify the accuracy of the data contained therein. DICE will be discussed in separate papers at ICNC 2011. The status of the ICSBEP and the IRPhEP will be discussed in the full paper, selected benchmarks that have been added to the ICSBEP Handbook will be highlighted, and a preview of the new benchmarks that will appear in the September 2011 edition of the Handbook will be provided. Accomplishments of the IRPhEP will also be highlighted and the future of both projects will be discussed. REFERENCES (1) International Handbook of Evaluated Criticality Safety Benchmark Experiments, NEA/NSC/DOC(95)03/I-IX, Organisation for Economic Co-operation and Development-Nuclear Energy Agency (OECD-NEA), September 2010 Edition, ISBN 978-92-64-99140-8. (2) International Handbook of Evaluated Reactor Physics Benchmark Experiments, NEA/NSC/DOC(2006)1, Organisation for Economic Co-operation and Development-Nuclear Energy Agency (OECD-NEA), March 2011 Edition, ISBN 978-92-64-99141-5.

  13. International Projects

    Broader source: Energy.gov [DOE]

    Through partnerships such as Energy Development in Island Nations (EDIN), the U.S. Department of Energy (DOE) and the National Renewable Energy Laboratory (NREL) collaborate to support clean energy...

  14. International Conference on Computational Heat and Mass Transfer Paper Number 135

    E-Print Network [OSTI]

    Khandekar, Sameer

    of heat transfer enhancement in sodium heat exchangers used in the fast breeder nuclear reactor [6 and liquid metals (Sodium, Potassium and Mercury) are utilized in the simulation. The critical sizes

  15. Resonant charge transfer of hydrogen Rydberg atoms incident at a Cu(100) projected band-gap surface

    E-Print Network [OSTI]

    Gibbard, J A; Kohlhoff, M; Rennick, C J; So, E; Ford, M; Softley, T P

    2015-01-01

    The charge transfer (ionization) of hydrogen Rydberg atoms (principal quantum number $n=25-34$) incident at a Cu(100) surface is investigated. Unlike fully metallic surfaces, where the Rydberg electron energy is degenerate with the conduction band of the metal, the Cu(100) surface has a projected bandgap at these energies, and only discrete image states are available through which charge transfer can take place. Resonant enhancement of charge transfer is observed at hydrogen principal quantum numbers for which the Rydberg energy matches the energy of one of the image states. The integrated surface ionization signals show clear periodicity as the energies of states with increasing $n$ come in and out of resonance with the image states. The velocity dependence of the surface ionization dynamics is also investigated. Decreased velocity of the incident H atom leads to a greater mean distance of ionization and a lower field required to extract the ion. The surface-ionization profiles (signal versus applied field) ...

  16. Project Profile: Deep Eutectic Salt Formulations Suitable as Advanced Heat Transfer Fluids

    Broader source: Energy.gov [DOE]

    Halotechnics, under the Thermal Storage FOA, is conducting high-throughput, combinatorial research and development of salt formulations for use as highly efficient heat transfer fluids (HTFs).

  17. Investigation of heat transfer augmentation through use of internally finned and roughened tubes : final summary report

    E-Print Network [OSTI]

    Bergles A. E.

    1970-01-01

    This report summarizes a three-year program concerned with obtaining basic design information for tubes having a random roughness on the inside wall (RID) and tubing having continuous internal fins (Forge Fin). Test apparatus ...

  18. 1 Copyright 2010 by ASME Proceedings of the International Heat Transfer Conference

    E-Print Network [OSTI]

    Khandekar, Sameer

    in drop-wise mode of vapor condensation. As opposed to film- wise condensation, drops permit a large heat transfer coefficient and are hence attractive. However, the temporal sustainability of drop formation underneath a lyophbic surface has been a subject of extensive research in many industrial and engineering

  19. International shock-wave database project : report of the requirements workshop.

    SciTech Connect (OSTI)

    Aidun, John Bahram; Lomonosov, Igor V.; Levashov, Pavel R.

    2012-03-01

    We report on the requirements workshop for a new project, the International Shock-Wave database (ISWdb), which was held October 31 - November 2, 2011, at GSI, Darmstadt, Germany. Participants considered the idea of this database, its structure, technical requirements, content, and principles of operation. This report presents the consensus conclusions from the workshop, key discussion points, and the goals and plan for near-term and intermediate-term development of the ISWdb. The main points of consensus from the workshop were: (1) This international database is of interest and of practical use for the shock-wave and high pressure physics communities; (2) Intermediate state information and off-Hugoniot information is important and should be included in ISWdb; (3) Other relevant high pressure and auxiliary data should be included to the database, in the future; (4) Information on the ISWdb needs to be communicated, broadly, to the research community; and (5) Operating structure will consist of an Advisory Board, subject-matter expert Moderators to vet submitted data, and the database Project Team. This brief report is intended to inform the shock-wave research community and interested funding agencies about the project, as its success, ultimately, depends on both of these groups finding sufficient value in the database to use it, contribute to it, and support it.

  20. Intrinsic Case Study of Advisors’ Perceptions of Advising International Transfer Students Transitioning from a Two-Year College to a Land-Grant University in the Southwest Region of the United States 

    E-Print Network [OSTI]

    De Sousa, David Alexandre

    2014-12-15

    This qualitative intrinsic case study examined advisor’s perceptions of advising transitioning international transfer students transferring from a two-year college to a land-grant institution in the southwest region on the United States. Literature...

  1. Dimensions of service quality of the University of Arizona Sponsored Projects Services Office internal customers 

    E-Print Network [OSTI]

    Baca, David Ray

    2007-04-25

    of Arizona Sponsored Projects Services Office Internal Customers. (December 2006) David Ray Baca, B.S., Texas A&M University; M.L.I.S. The University of Texas at Austin Chair of Advisory Committee: Dr. Bryan Cole When a service transaction occurs..., confidant and dear friend. When I walked into your office and you announced that you had registered me in the MLIS program at the University of Texas I was dumbstruck by your nerve and foresight. I still am. You will live in my thoughts and heart forever...

  2. CMOP Undergraduate Intern Mentoring Opportunity Project Title: Nitrification Potential and Niche Diversification of Ammonia Oxidizing Archaea in

    E-Print Network [OSTI]

    . They are essential for recycling nutrients through global biogeochemical cycles, which ultimately impacts our lives environment factors. Proposed Outcomes/Broader Impact: This project, developed for a CMOP undergraduate summer with the changing environment. The proposed summer intern project will be a part of our ongoing research to study

  3. CROSS VALIDATION OF SATELLITE RADIATION TRANSFER MODELS DURING SWERA PROJECT IN BRAZIL

    E-Print Network [OSTI]

    Heinemann, Detlev

    between two different core radiation transfer models that will be applied during the SWERA (Solar and Wind ­ 048°31'42"W / 10m) 2. BASIC DESCRIPTION OF SOLAR RADIATION SITES The two sites were chosen because they provide high quality radiation data and represent different climatic/environmental regions and different

  4. Two-Dimensional Computational Fluid Dynamics and Conduction Simulations of Heat Transfer in Horizontal Window Frames with Internal Cavities

    E-Print Network [OSTI]

    Gustavsen, Arlid

    2008-01-01

    be used to calculate radiation heat transfer. The convectionat about 5×10 -10 ). Radiation heat transfer was included inof rays in the radiation heat-transfer algorithm of the CFD

  5. Internal Heat Transfer Coefficient Determination in a Packed Bed From the Transient Response Due to Solid Phase Induction Heating

    E-Print Network [OSTI]

    Geb, David; Zhou, Feng; Catton, Ivan

    2012-01-01

    the Hydraulic Drag and Heat Transfer Coefficients in Porous5] Locke, G. L. , 1950, “Heat Transfer and Flow FrictionA. P. , 1993, “Heat Transfer and Hydraulic Resistance in

  6. Southern Region Watershed Management Project

    E-Print Network [OSTI]

    and technology transfer programs. #12;Southern Region Watershed Management Project September 15, 2000 and networking both internally and with other regional water resources management programs, promoted technology1 Southern Region Watershed Management Project September 15, 2000 to September 14, 2005 Terminal

  7. WSEAS-HMT'08-Kostic, PAGE 1 of 2 HMT'08-The 5th WSEAS International Conference on HEAT and MASS TRANSFER

    E-Print Network [OSTI]

    Kostic, Milivoje M.

    or higher, using reversible refrigeration or combined dual, power- and-heat-pump cycles, respectivelyWSEAS-HMT'08-Kostic, PAGE 1 of 2 HMT'08-The 5th WSEAS International Conference on HEAT and MASS LECTURE Uniqueness and Universality of Heat Transfer: Challenges and Opportunities for Improving Heat

  8. 6th International Symposium on Multiphase Flow, Heat Mass Transfer and Energy Conversion Xi'an, China, 11-15 July 2009

    E-Print Network [OSTI]

    Khandekar, Sameer

    from a variety of sources including fossil fuels (coal, natural gas, LPG, gasoline, diesel, methane in the process. Use of natural gas or naphtha as a raw material is an industrial process. Typical reactions6th International Symposium on Multiphase Flow, Heat Mass Transfer and Energy Conversion Xi

  9. Cost Transfers at the Department's Sodium Bearing Waste Treatment Facility Construction Project

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyTher i n c i p aDepartmentEnergy comparingDeepDecemberCornstalks Cost Transfers

  10. Biology for Students: Bioinformatics The Human Genome Project (HGP) is an international effort to determine the biochemical code for

    E-Print Network [OSTI]

    Weng, Zhiping

    Biology for Students: Bioinformatics The Human Genome Project (HGP) is an international effort and their regulatory elements that serve as the blueprint of human biology. The HGP has generated massive data and their interactions), which have also resulted from the HGP. The HGP will have major impacts on understanding

  11. DOE Funds 15 New Projects to Develop Solar Power Storage and Heat Transfer

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum Based| Department ofRefrigerators | Department DOE1Projects For Up to $67.6

  12. Effect of sanitizer treatments on Salmonella enterica serotype Poona on the surface of cantaloupe and cell transfer to the internal tissue during cutting practices 

    E-Print Network [OSTI]

    Vadlamudi, Sasi

    2005-02-17

    indicate that the levels of Salmonella Poona recovered were higher when the sample was obtained from the scar portion than the surface. Surface treatment with tap water or chlorine did not reduce Salmonella Poona. However treatment with lactic acid...-1 EFFECT OF SANITIZER TREATMENTS ON SALMONELLA ENTERICA SEROTYPE POONA ON THE SURFACE OF CANTALOUPE AND CELL TRANSFER TO THE INTERNAL TISSUE DURING CUTTING PRACTICES A Thesis by SASI VADLAMUDI Submitted to the Office of Graduate Studies...

  13. RESEARCH PROJECTS February 13

    E-Print Network [OSTI]

    Schenato, Luca

    RESEARCH PROJECTS FP7 February 13 #12; FP7 COOPERATION #12; INTERNATIONAL RESEARCH PROJECTS FP7 COOPERATION ENERGY PROJECT ACRONYM: EFONET PROJECT TITLE: Energy foresight network PROJECT

  14. The Multi-Scale Mass Transfer Processes Controlling Natural Attenuation and Engineered Remediation: An IFC Focused on Hanford’s 300 Area Uranium Plume Quality Assurance Project Plan

    SciTech Connect (OSTI)

    Fix, N. J.

    2008-01-31

    The purpose of the project is to conduct research at an Integrated Field-Scale Research Challenge Site in the Hanford Site 300 Area, CERCLA OU 300-FF-5 (Figure 1), to investigate multi-scale mass transfer processes associated with a subsurface uranium plume impacting both the vadose zone and groundwater. The project will investigate a series of science questions posed for research related to the effect of spatial heterogeneities, the importance of scale, coupled interactions between biogeochemical, hydrologic, and mass transfer processes, and measurements/approaches needed to characterize a mass-transfer dominated system. The research will be conducted by evaluating three (3) different hypotheses focused on multi-scale mass transfer processes in the vadose zone and groundwater, their influence on field-scale U(VI) biogeochemistry and transport, and their implications to natural systems and remediation. The project also includes goals to 1) provide relevant materials and field experimental opportunities for other ERSD researchers and 2) generate a lasting, accessible, and high-quality field experimental database that can be used by the scientific community for testing and validation of new conceptual and numerical models of subsurface reactive transport.

  15. Factors affecting the permanence of livestock projects undertaken by Heifer International-Mexico 

    E-Print Network [OSTI]

    Arispe, Sergio Adrian

    2003-01-01

    in the state of Durango, Mexico. This study identified and analyzed the factors affecting the permanence of hog and dairy cow projects in four communities in the state of Durango, Mexico. The researcher interviewed seven project managers and 35 beneficiaries...

  16. 7. International Immersive Projection Technologies Workshop 9. Eurographics Workshop on Virtual Environments (2003)

    E-Print Network [OSTI]

    Jenkin, Michael R. M.

    2003-01-01

    the development of immersive displays ranging from large single wall projections (e.g. the PowerWall16), three

  17. Sacks R. (1998), `Issues in the Development and Implementation of a Building Project Model for an Automated Building System', International Journal of Construction Information Technology, Salford University, Salford

    E-Print Network [OSTI]

    Sacks, Rafael

    1998-01-01

    of an Automated, Computer Integrated Building Realization System is to automatically generate all. Keywords: Building Project Model, Computer Integrated Construction, Automated Building System. INTRODUCTION for an Automated Building System', International Journal of Construction Information Technology, Salford University

  18. Rethinking the design paradigm for university technology projects in international development

    E-Print Network [OSTI]

    Lesniewski, Victor Adam

    2015-01-01

    Since the appropriate technology movement of the 1970s, technology and engineering from developed countries have played a role in international development. In recent years, universities have created graduate-level programs ...

  19. Radioactive Air Emission Notice of Construction (NOC) for Construction of Liquid Effluent Transfer System Project W-519

    SciTech Connect (OSTI)

    HOMAN, N.A.

    2000-05-01

    The proposed action is to install a new liquid effluent transfer system (three underground waste transfer pipelines). As such, a potential new source will be created as a result of the construction activities. The anticipated emissions associated with this activity are insignificant.

  20. Moab Uranium Mill Tailings Cleanup Project Steps into Spotlight at International Meeting in Vienna

    Broader source: Energy.gov [DOE]

    VIENNA – The Moab Uranium Mill Tailings Remedial Action (UMTRA) Project has kept the United States at the forefront of characterization, remediation, and end-state reuse of uranium millsites around the world.

  1. Design, Evaluation and Validation, and Analysis of a Five-Dimensional Leadership Questionnaire for a Project Leader in an International Scientific Research Environment

    E-Print Network [OSTI]

    Wilfinger, Roman

    2008-01-01

    The basic goal of the study is to develop a five dimensional leadership questionnaire for a project leader in an international scientific research laboratory and to verify statistically the independency of the individual questions from each other to ensure low overlap in content and meaning by achieving low correlation coefficients. This leadership questionnaire is designed to examine the behavior, personality, and character attributes of a project or experiment team leader in an international scientific research laboratory as perceived by her/his team members during the planning, design, implementation, and execution of the project itself. The leadership questionnaire is applied to a sample of about 40 participants from different international scientific research laboratories. This sample should represent in age, rank, and profession the whole population of employees and team members currently working in different international scientific research laboratories dealing with physics, informatics, and engineeri...

  2. Intellectual Property Protection and Technology Transfer: Evidence From US Multinationals

    E-Print Network [OSTI]

    Kanwar, Sunil

    2007-01-01

    International Technology Transfer? Empirical Evidence FromEffects on Investment, Technology Transfer, and Innovation’r&d as a mode of technology transfer The median levels of

  3. International H2O Project (IHOP) 2002: Datasets Related to Atmospheric Moisture and Rainfall Prediction

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Schanot, Allen [IHOP 2002 PI; Friesen, Dick [IHOP 2002 PI

    IHOP 2002 was a field experiment that took place over the Southern Great Plains of the United States from 13 May to 25 June 2002. The chief aim of IHOP_2002 was improved characterization of the four-dimensional (4-D) distribution of water vapor and its application to improving the understanding and prediction of convection. The region was an optimal location due to existing experimental and operational facilities, strong variability in moisture, and active convection [copied from http://www.eol.ucar.edu/projects/ihop/]. The project's master list of data identifies 146 publicly accessible datasets.

  4. ISO launches a project committee to develop an International Standard for energy management

    Broader source: Energy.gov [DOE]

    American National Standards Institute (ANSI) approved the formation of a U.S. Technical Advisory Group (US TAG) to the ISO Project Committee 242. The TAG is a mechanism for identifying issues and developing national consensus regarding energy management. Read this announcement for more details about the group's charge and how to participate.

  5. Reactive Diffusion in Cu-Nb-Sn Internal Tin Superconducting Wires for the ITER Project

    E-Print Network [OSTI]

    Elliott, James

    , Cambridge CB2 3QZ United Kingdom 2 Deperatment of Materials Science and Metallurgy, University of Cambridge, Pembroke Street, Cambridge CB2 3QZ United Kingdom 3 Outokumpu Copper Superconductors, Via Della Repubblica project, which investigates the production of electricity by means of nuclear fusion, have been studied

  6. Annual report of the international nuclear research initiative OSMOSE project (FY05).

    SciTech Connect (OSTI)

    Klann, R. T.; Hudelot, J. P.; Perret, G.; Drin, N.; Nuclear Engineering Division; Commissariat a l'Energie Atomique

    2007-10-03

    The goal of the OSMOSE program is to measure the reactivity effect of minor actinides in known neutron spectra of interest to the Generation-IV reactor program and other programs and to create a database of these results for use as an international benchmark for the minor actinides. The results are then compared to calculational models to verify and validate integral absorption cross-sections for the minor actinides. The OSMOSE program includes all aspects of the experimental program -- including the fabrication of fuel pellets and samples, the oscillation of the samples in the MINERVE reactor for the measurement of the reactivity effect, reactor physics modeling of the MINERVE reactor, and the data analysis and interpretation of the experimental results.

  7. Annual report of the international nuclear energy research initiative OSMOSE project (FY06).

    SciTech Connect (OSTI)

    Klann, R. T.; Hudelot, J. P.; Drin, N.; Zhong, Z.; Nuclear Engineering Division; Commissariat a l Energie Atomique

    2007-08-29

    The goal of the OSMOSE program is to measure the reactivity effect of minor actinides in known neutron spectra of interest to the Generation-IV reactor program and other programs and to create a database of these results for use as an international benchmark for the minor actinides. The results are then compared to calculation models to verify and validate integral absorption cross-sections for the minor actinides. The OSMOSE program includes all aspects of the experimental program--including the fabrication of fuel pellets and samples, the oscillation of the samples in the MINERVE reactor for the measurement of the reactivity effect, reactor physics modeling of the MINERVE reactor, and the data analysis and interpretation of the experimental results.

  8. Journal of Heat Transfer1999 JHT Heat Transfer Gallery Department of Mechanical 8. Aerospace Engineering

    E-Print Network [OSTI]

    Kihm, IconKenneth David

    Journal of Heat Transfer1999 JHT Heat Transfer Gallery S. M. You Department of Mechanical 8 Transfer Visualization Committee organized two photo gallery sessions in 1998. The International Heat Transfer Photo Gallery was held at the l la' International Heat Transfer Conference (IHTC) in Kyongju

  9. Results from the OECD report on international projections of electricity generating costs

    SciTech Connect (OSTI)

    Paffenbarger, J.A.; Bertel, E.

    1998-07-01

    The International Energy Agency and Nuclear Energy Agency of the OECD have periodically undertaken a joint study on electricity generating costs in OECD Member countries and selected non-Member countries. This paper presents key results from the 1998 update of this study. Experts from 19 countries drawn from electric utility companies and government provided data on capital costs, operating and maintenance costs, and fuel costs from which levelized electricity generating costs (US cents/kWh) for baseload power plants were estimated in each country using a common set of economic assumptions. Light water nuclear power plants, pulverized coal plants, and natural gas-fired combined cycle gas turbines were the principal options evaluated. five and 10% discount rates, 40-year operating lifetime, and 75% annual load factor were the base assumptions, with sensitivity analyses on operating lifetime and load factor. Fuel costs and fuel escalation were provided individually by country, with a sensitivity case to evaluate costs assuming no real fuel price escalation over plant lifetimes. Of the three principal fuel/technology options, none is predominantly the cheapest option for all economic assumptions. However, fossil-fueled options are generally estimated to be the least expensive option. The study confirms that gas-fired combined cycles have improved their economic performance in most countries in recent years and are strong competitors to nuclear and coal-fired plants. Eleven out of the 18 countries with two or more options show gas-fired plants to be the cheapest option at 10% discount rate. Coal remains a strong competitor to gas when lower discount rates are used. Nuclear is the least expensive at both 5 and 10% discount rate in only two countries. Generally, with gas prices above 5 US$/GJ, nuclear plants constructed at overnight capital costs below 1 650 $/kWe have the potential to be competitive only at lower discount rates.

  10. Transfer of Physical and Hydraulic Properties Databases to the Hanford Environmental Information System - PNNL Remediation Decision Support Project, Task 1, Activity 6

    SciTech Connect (OSTI)

    Rockhold, Mark L.; Middleton, Lisa A.

    2009-03-31

    This report documents the requirements for transferring physical and hydraulic property data compiled by PNNL into the Hanford Environmental Information System (HEIS). The Remediation Decision Support (RDS) Project is managed by Pacific Northwest National Laboratory (PNNL) to support Hanford Site waste management and remedial action decisions by the U.S. Department of Energy and one of their current site contractors - CH2M-Hill Plateau Remediation Company (CHPRC). The objective of Task 1, Activity 6 of the RDS project is to compile all available physical and hydraulic property data for sediments from the Hanford Site, to port these data into the Hanford Environmental Information System (HEIS), and to make the data web-accessible to anyone on the Hanford Local Area Network via the so-called Virtual Library.1 These physical and hydraulic property data are used to estimate parameters for analytical and numerical flow and transport models that are used for site risk assessments and evaluation of remedial action alternatives. In past years efforts were made by RDS project staff to compile all available physical and hydraulic property data for Hanford sediments and to transfer these data into SoilVision{reg_sign}, a commercial geotechnical software package designed for storing, analyzing, and manipulating soils data. Although SoilVision{reg_sign} has proven to be useful, its access and use restrictions have been recognized as a limitation to the effective use of the physical and hydraulic property databases by the broader group of potential users involved in Hanford waste site issues. In order to make these data more widely available and useable, a decision was made to port them to HEIS and to make them web-accessible via a Virtual Library module. In FY08 the original objectives of this activity on the RDS project were to: (1) ensure traceability and defensibility of all physical and hydraulic property data currently residing in the SoilVision{reg_sign} database maintained by PNNL, (2) transfer the physical and hydraulic property data from the Microsoft Access database files used by SoilVision{reg_sign} into HEIS, which is currently being maintained by CHRPC, (3) develop a Virtual Library module for accessing these data from HEIS, and (4) write a User's Manual for the Virtual Library module. The intent of these activities is to make the available physical and hydraulic property data more readily accessible and useable by technical staff and operable unit managers involved in waste site assessments and remedial action decisions for Hanford. In FY08 communications were established between PNNL and staff from Fluor-Hanford Co. (who formerly managed HEIS) to outline the design of a Virtual Library module that could be used to access the physical and hydraulic property data that are to be transferred into HEIS. Data dictionaries used by SoilVision{reg_sign} were also provided to Fluor-Hanford personnel (who are now with CHPRC). During ongoing work to ensure traceability and defensibility of all physical and hydraulic property data that currently reside in the SoilVision{reg_sign} database, it was recognized that further work would be required in this effort before the data were actually ported into HEIS. Therefore work on the Virtual Library module development and an accompanying User's Guide was deferred until an unspecified later date. In FY09 efforts have continued to verify the traceability and defensibility of the physical and hydraulic property datasets that are currently being maintained by PNNL. Although this is a work in progress, several of these datasets should be ready for transfer to HEIS in the very near future. This document outlines a plan for the migration of these datasets into HEIS.

  11. The 1st International Symposium on Micro & Nano Technology, 14-17 March, 2004, Honolulu, Hawaii, USA MOLECULAR DYNAMICS SIMULATIONS OF HEAT TRANSFER ISSUES

    E-Print Network [OSTI]

    Maruyama, Shigeo

    , USA MOLECULAR DYNAMICS SIMULATIONS OF HEAT TRANSFER ISSUES IN CARBON NANOTUBES S. Maruyama, Y-3-1 Hongo, Bunkyo-ku, Tokyo 113-8656, JAPAN ABSTRACT Several heat transfer problems related to single, and thermal boundary resistance in a junction of nanotubes are reviewed. Then, the heat transfer from an SWNT

  12. Status Report on Transfer of Physical and Hydraulic Properties Databases to the Hanford Environmental Information System - PNNL Remediation Decision Support Project, Task 1, Activity 6

    SciTech Connect (OSTI)

    Rockhold, Mark L.; Middleton, Lisa A.; Cantrell, Kirk J.

    2009-06-30

    This document provides a status report on efforts to transfer physical and hydraulic property data from PNNL to CHPRC for incorporation into HEIS. The Remediation Decision Support (RDS) Project is managed by Pacific Northwest National Laboratory (PNNL) to support Hanford Site waste management and remedial action decisions by the U.S. Department of Energy and their contractors. The objective of Task 1, Activity 6 of the RDS project is to compile all available physical and hydraulic property data for sediments from the Hanford Site, to port these data into the Hanford Environmental Information System (HEIS), and to make the data web-accessible to anyone on the Hanford Local Area Network via the so-called Virtual Library. These physical and hydraulic property data are used to estimate parameters for analytical and numerical flow and transport models that are used for site risk assessments and evaluation of remedial action alternatives. In past years efforts were made by RDS project staff to compile all available physical and hydraulic property data for Hanford sediments and to transfer these data into SoilVision{reg_sign}, a commercial geotechnical software package designed for storing, analyzing, and manipulating soils data. Although SoilVision{reg_sign} has proven to be useful, its access and use restrictions have been recognized as a limitation to the effective use of the physical and hydraulic property databases by the broader group of potential users involved in Hanford waste site issues. In order to make these data more widely available and useable, a decision was made to port them to HEIS and to make them web-accessible via a Virtual Library module. In FY08 the original objectives of this activity on the RDS project were to: (1) ensure traceability and defensibility of all physical and hydraulic property data currently residing in the SoilVision{reg_sign} database maintained by PNNL, (2) transfer the physical and hydraulic property data from the Microsoft Access database files used by SoilVision{reg_sign} into HEIS, which is currently being maintained by CH2M-Hill Plateau Remediation Company (CHRPC), (3) develop a Virtual Library module for accessing these data from HEIS, and (4) write a User's Manual for the Virtual Library module. The intent of these activities is to make the available physical and hydraulic property data more readily accessible and useable by technical staff and operable unit managers involved in waste site assessments and remedial action decisions for Hanford. In FY08 communications were established between PNNL and staff from Fluor-Hanford Co. (who formerly managed HEIS) to outline the design of a Virtual Library module that could be used to access the physical and hydraulic property data that are to be transferred into HEIS. Data dictionaries used by SoilVision{reg_sign} were also provided to Fluor-Hanford personnel who are now with CHPRC. During ongoing work to ensure traceability and defensibility of all physical and hydraulic property data that currently reside in the SoilVision{reg_sign} database, it was recognized that further work would be required in this effort before the data were actually ported into HEIS. Therefore work on the Virtual Library module development and an accompanying User's Guide was deferred until an unspecified later date. In FY09 efforts have continued to verify the traceability and defensibility of the physical and hydraulic property datasets that are currently being maintained by PNNL. Although this is a work in progress, several of these datasets are now ready for transfer to CHRPC for inclusion in HEIS. The actual loading of data into HEIS is performed by CHPRC staff, so after the data are transferred from PNNL to CHPRC, it will be the responsibility of CHPRC to ensure that these data are loaded and made accessible. This document provides a status report on efforts to transfer physical and hydraulic property data from PNNL to CHPRC for incorporation into HEIS.

  13. University of British Columbia, Faculty of Land and Food Systems FRE 521E: Project Monitoring & Evaluation in International Development

    E-Print Network [OSTI]

    changes in development project outcomes, informing processes for better design of future projects, and, offering informed recommendations for policy change in support of development projects as well of this course, with a special focus on assistance interventions through (aid) development projects and programs

  14. PROJECT MANAGEMENT Professional Organizations

    E-Print Network [OSTI]

    Acton, Scott

    PROJECT MANAGEMENT Professional Organizations: Project Management Institute International Association of Project and Program Management (IAPPM) Events & Training: UVa Center for Leadership Excellence classes SkillSoft classes PMO Symposium through PMI Project Management Institute (PMI) webinars American

  15. Cost Transfer Procedures How And When To Make Cost Transfers

    E-Print Network [OSTI]

    Hammack, Richard

    Cost Transfer Procedures How And When To Make Cost Transfers Effective February 9, 2003, cost elsewhere. Federal regulations require additional documentation to support cost transfers to sponsored program indexes. Costs may not be shifted to other research projects or from one budget period to the next

  16. 6th International Symposium on Multiphase Flow, Heat Mass Transfer and Energy Conversion ISMF2009, Xi'an, China, 11-15 July 2009

    E-Print Network [OSTI]

    Khandekar, Sameer

    Pulsating Heat Pipe Radiators by Infrared Thermography Vadiraj A. Hemadri1 , Sameer Khandekar2 1: Dept of Closed Loop Pulsating Heat pipe (CLPHP) embedded radiator plates subjected to conjugate heat transfer by embedding PHP structure. Keywords: Pulsating Heat Pipes, Space Radiators, Conjugate Heat Transfer 1

  17. Validation of a 4D-PET Maximum Intensity Projection for Delineation of an Internal Target Volume

    SciTech Connect (OSTI)

    Callahan, Jason; Kron, Tomas; Peter MacCallum Department of Oncology, The University of Melbourne, Melbourne ; Schneider-Kolsky, Michal; Dunn, Leon; Thompson, Mick; Siva, Shankar; Aarons, Yolanda; Peter MacCallum Department of Oncology, The University of Melbourne, Melbourne ; Binns, David; Hicks, Rodney J.; Peter MacCallum Department of Oncology, The University of Melbourne, Melbourne

    2013-07-15

    Purpose: The delineation of internal target volumes (ITVs) in radiation therapy of lung tumors is currently performed by use of either free-breathing (FB) {sup 18}F-fluorodeoxyglucose-positron emission tomography-computed tomography (FDG-PET/CT) or 4-dimensional (4D)-CT maximum intensity projection (MIP). In this report we validate the use of 4D-PET-MIP for the delineation of target volumes in both a phantom and in patients. Methods and Materials: A phantom with 3 hollow spheres was prepared surrounded by air then water. The spheres and water background were filled with a mixture of {sup 18}F and radiographic contrast medium. A 4D-PET/CT scan was performed of the phantom while moving in 4 different breathing patterns using a programmable motion device. Nine patients with an FDG-avid lung tumor who underwent FB and 4D-PET/CT and >5 mm of tumor motion were included for analysis. The 3 spheres and patient lesions were contoured by 2 contouring methods (40% of maximum and PET edge) on the FB-PET, FB-CT, 4D-PET, 4D-PET-MIP, and 4D-CT-MIP. The concordance between the different contoured volumes was calculated using a Dice coefficient (DC). The difference in lung tumor volumes between FB-PET and 4D-PET volumes was also measured. Results: The average DC in the phantom using 40% and PET edge, respectively, was lowest for FB-PET/CT (DCAir = 0.72/0.67, DCBackground 0.63/0.62) and highest for 4D-PET/CT-MIP (DCAir = 0.84/0.83, DCBackground = 0.78/0.73). The average DC in the 9 patients using 40% and PET edge, respectively, was also lowest for FB-PET/CT (DC = 0.45/0.44) and highest for 4D-PET/CT-MIP (DC = 0.72/0.73). In the 9 lesions, the target volumes of the FB-PET using 40% and PET edge, respectively, were on average 40% and 45% smaller than the 4D-PET-MIP. Conclusion: A 4D-PET-MIP produces volumes with the highest concordance with 4D-CT-MIP across multiple breathing patterns and lesion sizes in both a phantom and among patients. Freebreathing PET/CT consistently underestimates ITV when compared with 4D PET/CT for a lesion affected by respiration.

  18. Program Website: http://www.nrel.colostate.edu/projects/ires EA-IRES: East African International Research

    E-Print Network [OSTI]

    MacDonald, Lee

    Program Website: http://www.nrel.colostate.edu/projects/ires EA-IRES: East African Ecology Laboratory (NREL) in the Warner College of Natural Resources

  19. Nucleon transfer in heavy ion collisions with the time-dependent Hartree-Fock theory using a particle number projection technique

    E-Print Network [OSTI]

    Nucleon transfer in heavy ion collisions with the time-dependent Hartree-Fock theory using of Physics and Engineering, Australian National University, Canberra, Australian Capital Territory 0200-transfers are discussed. Binary collisions of many-body systems are of funda- mental interest to test dynamical approaches

  20. on the Establishment of the ITER International Fusion Energy Organization for the Joint Implementation of the ITER Project

    E-Print Network [OSTI]

    AGREEMENT on the Establishment of the ITER International Fusion Energy Organization for the Joint Fusion Energy Organization Article 2 Purpose of the ITER Organization Article 3 Functions of the ITER://fusionforenergy.europa.eu/downloads/aboutf4e/l_35820061216en00620081.pdf #12;Preamble The European Atomic Energy Community (hereinafter

  1. International Snow Science Workshop Grenoble Chamonix Mont-Blanc -2013 Impressions from Applying ISO 31000 to an Avalanche Mitigation Project

    E-Print Network [OSTI]

    Jamieson, Bruce

    International Snow Science Workshop Grenoble ­ Chamonix Mont-Blanc - 2013 Impressions from Applying, property damage or transportation delays, all of which can be caused by snow avalanches. Since few and terminology using a simple hypothetical example of a proposed mining road threatened by snow avalanches

  2. ITER pioneers receive prestigious Russian energy prize of June in Saint Petersburg, three pioneers of the international fusion project

    E-Print Network [OSTI]

    's energy leaders Russia is not only engaged in exporting energy resources and electricity. We intend. Russia, the United States, the European Union, Japan, Canada, China, India and South Korea have united by the Russian oil companies Gazprom, UES of Russia, and Yukos, and is awarded by an international award

  3. PERGAMON International Journal of Heat and Mass Transfer 31 "0888# 268271 99068209:87:,*see front matter 0887 Elsevier Science Ltd[ All rights reserved

    E-Print Network [OSTI]

    Guo, Zhixiong "James"

    Ð 7 Technical Note Conjugate heat and mass transfer in metal hydride beds in the hydriding process Zhixiong Guo0 \\ Hyung Jin Sung Department of Mechanical Engineering\\ Korea Advanced Institute of Science[ Introduction Metal hydride applications span a wide variety of tech! nologies\\ e[g[\\ energy conversion

  4. Diesel Cycle: Since we use a Closed System, the work and heat transfers are calculated from changes in internal energy u

    E-Print Network [OSTI]

    Diesel Cycle: Since we use a Closed System, the work and heat transfers are calculated from changes of Diesels (and therefore potential th) are likely to be much higher, because rather than worrying about pre-ignition, we are counting on self-ignition! 1 #12;On top of that, Diesel cycles have no throttling losses, so

  5. Office of Technology Transfer Material Transfer Agreements

    E-Print Network [OSTI]

    Tullos, Desiree

    Office of Technology Transfer · Material Transfer Agreements · Confidentiality Agreements · Copyright / Patent Licensing The Office of Technology Transfer facilitates the transfer of innovations out of the university for public benefit TOOLS #12;Office of Technology Transfer Facilitating transfer of innovations

  6. Summary Report on Information Technology Integration Activities For project to Enhance NASA Tools for Coastal Managers in the Gulf of Mexico and Support Technology Transfer to Mexico

    SciTech Connect (OSTI)

    Gulbransen, Thomas C.

    2009-04-27

    Deliverable to NASA Stennis Space Center summarizing summarizes accomplishments made by Battelle and its subcontractors to integrate NASA's COAST visualization tool with the Noesis search tool developed under the Gulf of Mexico Regional Collaborative project.

  7. Pressure drop, heat transfer, critical heat flux, and flow stability of two-phase flow boiling of water and ethylene glycol/water mixtures - final report for project "Efficent cooling in engines with nucleate boiling."

    SciTech Connect (OSTI)

    Yu, W.; France, D. M.; Routbort, J. L.

    2011-01-19

    Because of its order-of-magnitude higher heat transfer rates, there is interest in using controllable two-phase nucleate boiling instead of conventional single-phase forced convection in vehicular cooling systems to remove ever increasing heat loads and to eliminate potential hot spots in engines. However, the fundamental understanding of flow boiling mechanisms of a 50/50 ethylene glycol/water mixture under engineering application conditions is still limited. In addition, it is impractical to precisely maintain the volume concentration ratio of the ethylene glycol/water mixture coolant at 50/50. Therefore, any investigation into engine coolant characteristics should include a range of volume concentration ratios around the nominal 50/50 mark. In this study, the forced convective boiling heat transfer of distilled water and ethylene glycol/water mixtures with volume concentration ratios of 40/60, 50/50, and 60/40 in a 2.98-mm-inner-diameter circular tube has been investigated in both the horizontal flow and the vertical flow. The two-phase pressure drop, the forced convective boiling heat transfer coefficient, and the critical heat flux of the test fluids were determined experimentally over a range of the mass flux, the vapor mass quality, and the inlet subcooling through a new boiling data reduction procedure that allowed the analytical calculation of the fluid boiling temperatures along the experimental test section by applying the ideal mixture assumption and the equilibrium assumption along with Raoult's law. Based on the experimental data, predictive methods for the two-phase pressure drop, the forced convective boiling heat transfer coefficient, and the critical heat flux under engine application conditions were developed. The results summarized in this final project report provide the necessary information for designing and implementing nucleate-boiling vehicular cooling systems.

  8. Submitted to the International Workshop on Compiler and Architecture Support for EmbeddedComputing Systems ---CASES'98. Other work related to this project can be found at http://www.eecg.toronto.edu/~pc/research/dsp/

    E-Print Network [OSTI]

    Chow, Paul

    the performance of traditional DSP architectures. From an estimation of the effects of the restrictive useSubmitted to the International Workshop on Compiler and Architecture Support for EmbeddedComputing Systems --- CASES'98. Other work related to this project can be found at http

  9. International Nuclear Energy Research Initiative, Fiscal Year...

    Broader source: Energy.gov (indexed) [DOE]

    Area: Reactor Concepts RD&D Project Start Date: January 2011 Project End Date: December 2013 38 | International Nuclear Energy Research Initiative (I-NERI) Fiscal Year 2011...

  10. EM International. Volume 1

    SciTech Connect (OSTI)

    Not Available

    1993-07-01

    It is the intent of EM International to describe the Office of Environmental Restoration and Waste Management`s (EM`s) various roles and responsibilities within the international community. Cooperative agreements and programs, descriptions of projects and technologies, and synopses of visits to international sites are all highlighted in this semiannual journal. Focus on EM programs in this issue is on international collaboration in vitrification projects. Technology highlights covers: in situ sealing for contaminated sites; and remote sensors for toxic pollutants. Section on profiles of countries includes: Arctic contamination by the former Soviet Union, and EM activities with Germany--cooperative arrangements.

  11. International energy outlook 1996

    SciTech Connect (OSTI)

    NONE

    1996-05-01

    This International Energy Outlook presents historical data from 1970 to 1993 and EIA`s projections of energy consumption and carbon emissions through 2015 for 6 country groups. Prospects for individual fuels are discussed. Summary tables of the IEO96 world energy consumption, oil production, and carbon emissions projections are provided in Appendix A. The reference case projections of total foreign energy consumption and of natural gas, coal, and renewable energy were prepared using EIA`s World Energy Projection System (WEPS) model. Reference case projections of foreign oil production and consumption were prepared using the International Energy Module of the National Energy Modeling System (NEMS). Nuclear consumption projections were derived from the International Nuclear Model, PC Version (PC-INM). Alternatively, nuclear capacity projections were developed using two methods: the lower reference case projections were based on analysts` knowledge of the nuclear programs in different countries; the upper reference case was generated by the World Integrated Nuclear Evaluation System (WINES)--a demand-driven model. In addition, the NEMS Coal Export Submodule (CES) was used to derive flows in international coal trade. As noted above, foreign projections of electricity demand are now projected as part of the WEPS. 64 figs., 62 tabs.

  12. 100-N Area Strontium-90 Treatability Demonstration Project: Food Chain Transfer Studies for Phytoremediation Along the 100-N Columbia River Riparian Zone

    SciTech Connect (OSTI)

    Fellows, Robert J.; Fruchter, Jonathan S.; Driver, Crystal J.

    2009-04-01

    Strontium-90 (90Sr) exceeds the U.S. Environmental Protection Agency’s drinking water standards for groundwater (8 picocuries/L) by as much as a factor of 1000 at several locations within the Hanford 100-N Area and along the 100-N Area Columbia River shoreline). Phytoextraction, a managed remediation technology in which plants or integrated plant/rhizosphere systems are employed to phytoextract and/or sequester 90Sr, is being considered as a potential remediation system along the riparian zone of the Columbia River as part of a treatment train that includes an apatite barrier to immobilize groundwater transport of 90Sr. Phytoextraction would employ coyote willow (Salix exigua) to extract 90Sr from the vadose zone soil and aquifer sediments (phytoextraction) and filter 90Sr (rhizofiltration) from the shallow groundwater along the riparian zone of the Columbia River. The stem and foliage of coyote willows accumulating 90Sr may present not only a mechanism to remove the contaminant but also can be viewed as a source of nutrition for natural herbivores, therefore becoming a potential pathway for the isotope to enter the riparian food chain. Engineered barriers such as large and small animal fencing constructed around the field plot will control the intrusion of deer, rodents, birds, and humans. These efforts, however, will have limited effect on mobile phytophagous insects. Therefore, this study was undertaken to determine the potential for food chain transfer by insects prior to placement of the remediation technology at 100-N. Insect types include direct consumers of the sap or liquid content of the plants vascular system (xylem and phloem) by aphids as well as those that would directly consume the plant foliage such as the larvae (caterpillars) of Lepidoptera species. Heavy infestations of aphids feeding on the stems and leaves of willows growing in 90Sr-contaminated soil can accumulate a small amount (~0.15 ± 0.06%) of the total label removed from the soil by the plant over a 17-day exposure period. The 90Sr in the exuded honeydew during this period amounted to 1.17 ± 0.28% of this total label. The honeydew would eventually be deposited into the soil at the base of the plant, but the activity would be so dispersed as to be undetectable. Moth larvae will consume 90Sr contaminated leaves but retain very little of the label (~0.02%) and only that contained in their digestive tracts. As the moths pupated and became adults, they contained no detectable amounts of 90Sr. Over the 10-day exposure period, ~4% of the phytoextracted 90Sr was lost from the plant as moth feces. However, like the honeydew, feces dispersed into the soil were undetectable. As the plant diminishes the content of 90Sr in the soil, the activity of the label in the leaves and new stems would also diminish. The results of these studies indicate that the risk for detectable transfer of 90Sr from willow trees growing in the contaminated soil along the 100-N shoreline through the food chain of herbivorous insects would be very slight to non-existent

  13. Barriers to innovation transfer in a remote and rural health, social care & housing setting 

    E-Print Network [OSTI]

    Gallimore, Annette

    2011-11-25

    Introduction: The transfer of good practice into a new area is seldom straightforward. This study investigates the process leading up to transfer in a project which aimed to transfer best practice into health, social care and housing in a remote...

  14. Kansas Advanced Semiconductor Project

    SciTech Connect (OSTI)

    Baringer, P.; Bean, A.; Bolton, T.; Horton-Smith, G.; Maravin, Y.; Ratra, B.; Stanton, N.; von Toerne, E.; Wilson, G.

    2007-09-21

    KASP (Kansas Advanced Semiconductor Project) completed the new Layer 0 upgrade for D0, assumed key electronics projects for the US CMS project, finished important new physics measurements with the D0 experiment at Fermilab, made substantial contributions to detector studies for the proposed e+e- international linear collider (ILC), and advanced key initiatives in non-accelerator-based neutrino physics.

  15. Coordination of Transmission Line Transfer Capabilities

    E-Print Network [OSTI]

    Coordination of Transmission Line Transfer Capabilities Final Project Report Power Systems since 1996 PSERC #12;Power Systems Engineering Research Center Coordination of Transmission Line Industry Representative Richard Goddard Portland General Electric Research Team Students Yuan Li Yonghong

  16. Characterization and Development of Advanced Heat Transfer Technologies (Presentation)

    SciTech Connect (OSTI)

    Kelly, K.

    2009-05-01

    This presentation gives an overview of the status and FY09 accomplishments for the NREL thermal management research project 'Characterization and Development of Advanced Heat Transfer Technologies'.

  17. IN TODAY'S PAPER International

    E-Print Network [OSTI]

    India's participation in the multi-billion-dollar International Thermonuclear Reactor project which aims to use fusion energy for peaceful purposes. New Delhi, Oct. 27: Almost all key world players, including device to produce thermal energy at the level of an electricity-producing power station. The project

  18. International partnerships in renewable energy: Promoting climate challenge partnerships by small U.S. utilities. Fourth project report, October 1997--March 1998

    SciTech Connect (OSTI)

    1999-02-01

    In 1997, the National Rural Electric Cooperative Association (NRECA) received a grant from the Department of Energy (DOE) to implement a program to promote the participation of NRECA members in the President`s Climate Challenge Action Plan. NRECA had been in discussions with Salt River Project (SRP) and the Arizona Electric Power Cooperative (AEPCO) to pursue the opportunity of supporting a small solar energy rural electrification project in Sonora prior to the signature of this agreement. When the Climate Challenge project was approved, an agreement between NRECA, SRP, and AEPCO was reached to implement the Sonora project with funding from DOE, SRP, and AEPCO. This periodic report will summarize the results of the Sonora solar electrification project. While other Climate Challenge activities were also underway during this reporting period, due to the impact of this project it was decided to provide an in-depth report of this single project. Information directly relevant to the actions taken on this project is provided in Annexes 1 and 2. The goals of the Sonora Solar Electrification project were the following: (1) demonstrate the willingness and ability of US electric utilities to undertake a climate challenge project using renewable energy technologies; (2) select one or more communities distant from the electric grid with sufficient interest and resources to accept and sustain rural electric service using solar photovoltaic energy; (3) organize a payment system that would provide for the long-term technical and institutional viability of the project; (4) train users to operate the solar home systems safely and within proper operating parameters; (5) train local technicians to maintain the solar home systems; (6) procure and install high quality equipment at affordable costs; and (7) ascertain market conditions for expansion of program in the future.

  19. Energy Efficiency Project Development

    SciTech Connect (OSTI)

    IUEP

    2004-03-01

    The International Utility Efficiency Partnerships, Inc. (IUEP) has been a leader among the industry groups that have supported voluntary initiatives to promote international energy efficiency projects and address global climate change. The IUEP maintains its leadership by both supporting international greenhouse gas (GHG) reduction projects under the auspices of the U.S. Department of Energy (DOE) and by partnering with U.S. and international organizations to develop and implement strategies and specific energy efficiency projects. The goals of the IUEP program are to (1) provide a way for U.S. industry to maintain a leadership role in international energy efficiency infrastructure projects; (2) identify international energy project development opportunities to continue its leadership in supporting voluntary market-based mechanisms to reduce GHG emissions; and (3) demonstrate private sector commitment to voluntary approaches to global climate issues. The IUEP is dedicated to identifying, promoting, managing, and assisting in the registration of international energy efficiency projects that result in demonstrated voluntary reductions of GHG emissions. This Final Technical Report summarizes the IUEP's work in identifying, promoting, managing, and assisting in development of these projects and IUEP's effort in creating international cooperative partnerships to support project development activities that develop and deploy technologies that (1) increase efficiency in the production, delivery and use of energy; (2) increase the use of cleaner, low-carbon fuels in processing products; and (3) capture/sequester carbon gases from energy systems. Through international cooperative efforts, the IUEP intends to strengthen partnerships for energy technology innovation and demonstration projects capable of providing cleaner energy in a cost-effective manner. As detailed in this report, the IUEP met program objectives and goals during the reporting period January 1, 2001 through December 31, 2002. At the request of the DOE, we have also included in this report additional activities during the reporting period January, 1999 through January, 2001. This additional information had been reported earlier in the Final Technical Reports that summarized activities undertaken in those earlier periods.

  20. Prospects for international trade in environmental services: An analysis of international carbon emission off-sets

    SciTech Connect (OSTI)

    Swisher, J.N.

    1991-01-01

    This dissertation presents a case study analysis in which the costs to a US electric utility of reducing its carbon dioxide (CO{sub 2}) emissions are compared with the costs of carbon-saving forestry projects in Costa Rica and Guatemala. The results show that a large electric utility in the south-central US would find it relatively inexpensive, even profitable given a conducive regulatory treatment, to reduce its CO{sub 2} emissions by a few percent over the next ten years, through direct investment in energy end-use efficiency improvements. In comparison, the costs of the forestry projects studied in Central America range from $1/TC to a worst-case value of about $55/TC, with most project costs between $5 and $13/TC, depending on the type of project, the climate, and the opportunity cost of land. The total amount of CO{sub 2} storage potential is significant, about 100 million tons per country, but not enough to suggest that forestry can offset more than a few percent of global CO{sub 2} emissions from fossil fuel use. These case studies suggest that international trade in the environmental service of reducing global CO{sub 2} accumulation could have significant economic and ecological benefits. A transaction in which a utility pays for forestry projects in exchange for credit against an emission reduction policy is an example of an international carbon emission offset (ICEO). ICEO's could provide a currency for funding carbon-saving services as a way to comply with national policies to reduce CO{sub 2} emissions, as long as compliance is allowed through investments in other countries. This type of North-South transfer is necessary to reconcile economic efficiency and international equity, because of the disparity between the national allocations of responsibility for greenhouse gas emissions and opportunities for emission reductions.

  1. International Affairs International Services

    E-Print Network [OSTI]

    Meyers, Steven D.

    Chemistry Business Administration Electrical EngineeringI International Affairs International Services Fall 0.2% Denmark 4 0.3% Dominica 2 0.1% Dominican Republic 3 0.2% Ecuador 10 0.7% Egypt 10 0.7% El

  2. International Policy International Development

    E-Print Network [OSTI]

    Watson, Andrew

    Research Strategy 2006-2009 International Policy Energy Adaptation International Development Coasts Change Research. Our strategy builds upon our previous work on integrated assessment, energy, adaptation of time. In this spirit, the Centre reconfirms its vision statement: "The Tyndall Centre is the UK network

  3. Operational Waste Volume Projection

    SciTech Connect (OSTI)

    STRODE, J.N.

    2000-08-28

    Waste receipts to the double-shell tank system are analyzed and wastes through the year 2015 are projected based on generation trends of the past 12 months. A computer simulation of site operations is performed, which results in projections of tank fill schedules, tank transfers, evaporator operations, tank retrieval, and aging waste tank usage. This projection incorporates current budget planning and the clean-up schedule of the Tri-Party Agreement. Assumptions were current as of June. 2000.

  4. Operational Waste Volume Projection

    SciTech Connect (OSTI)

    STRODE, J.N.

    1999-08-24

    Waste receipts to the double-shell tank system are analyzed and wastes through the year 2018 are projected based on assumption as of July 1999. A computer simulation of site operations is performed, which results in projections of tank fill schedules, tank transfers, evaporator operations, tank retrieval, and aging waste tank usage. This projection incorporates current budget planning and the clean-up schedule of the Tri-Party Agreement.

  5. INTERNAL REPAIR OF PIPELINES

    SciTech Connect (OSTI)

    Robin Gordon; Bill Bruce; Ian Harris; Dennis Harwig; Nancy Porter; Mike Sullivan; Chris Neary

    2004-04-12

    The two broad categories of deposited weld metal repair and fiber-reinforced composite liner repair technologies were reviewed for potential application for internal repair of gas transmission pipelines. Both are used to some extent for other applications and could be further developed for internal, local, structural repair of gas transmission pipelines. Preliminary test programs were developed for both deposited weld metal repair and for fiber-reinforced composite liner repair. Evaluation trials have been conducted using a modified fiber-reinforced composite liner provided by RolaTube and pipe sections without liners. All pipe section specimens failed in areas of simulated damage. Pipe sections containing fiber-reinforced composite liners failed at pressures marginally greater than the pipe sections without liners. The next step is to evaluate a liner material with a modulus of elasticity approximately 95% of the modulus of elasticity for steel. Preliminary welding parameters were developed for deposited weld metal repair in preparation of the receipt of Pacific Gas & Electric's internal pipeline welding repair system (that was designed specifically for 559 mm (22 in.) diameter pipe) and the receipt of 559 mm (22 in.) pipe sections from Panhandle Eastern. The next steps are to transfer welding parameters to the PG&E system and to pressure test repaired pipe sections to failure. A survey of pipeline operators was conducted to better understand the needs and performance requirements of the natural gas transmission industry regarding internal repair. Completed surveys contained the following principal conclusions: (1) Use of internal weld repair is most attractive for river crossings, under other bodies of water, in difficult soil conditions, under highways, under congested intersections, and under railway crossings. (2) Internal pipe repair offers a strong potential advantage to the high cost of horizontal direct drilling (HDD) when a new bore must be created to solve a leak or other problem. (3) Typical travel distances can be divided into three distinct groups: up to 305 m (1,000 ft.); between 305 m and 610 m (1,000 ft. and 2,000 ft.); and beyond 914 m (3,000 ft.). All three groups require pig-based systems. A despooled umbilical system would suffice for the first two groups which represents 81% of survey respondents. The third group would require an onboard self-contained power unit for propulsion and welding/liner repair energy needs. (4) Pipe diameter sizes range from 50.8 mm (2 in.) through 1,219.2 mm (48 in.). The most common size range for 80% to 90% of operators surveyed is 508 mm to 762 mm (20 in. to 30 in.), with 95% using 558.8 mm (22 in.) pipe. An evaluation of potential repair methods clearly indicates that the project should continue to focus on the development of a repair process involving the use of GMAW welding and on the development of a repair process involving the use of fiber-reinforced composite liners.

  6. The! Community! Earth! System! Model! (CESM)! Large! Ensemble! Project:! A! Community!3! Resource!for!Studying!Climate!Change!in!the!Presence!of!Internal!Climate!Variability!4!

    E-Print Network [OSTI]

    Kay, Jennifer

    !1! !2! The! Community! Earth! System! Model! (CESM)! Large! Ensemble! Project:! A! Community!3!Earth!System!Model!(CESM)!community!designed!the!CESM!Large!Ensemble!39! (CESMWLE)!with!the!explicit

  7. Technology Transfer for Brownfields Redevelopment Project

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy has provided six computers to Prichard to improve its decision-making process through Geographic Information System (GIS) as a decision-making tool. The agency has...

  8. Technology Transfer David Basin and Thai Son Hoang

    E-Print Network [OSTI]

    Basin, David

    Technology Transfer David Basin and Thai Son Hoang Institute of Information Security, ETH Zurich, Switzerland Abstract. This paper presents our experience of knowledge and technology transfer within the lessons learned and what we would do differently in future technology transfer projects. Keywords

  9. SOFTWARE TECHNOLOGY TRANSFER FROM SLS David Talkin, Principal Investigator

    E-Print Network [OSTI]

    SOFTWARE TECHNOLOGY TRANSFER FROM SLS David Talkin, Principal Investigator Entropic Research as a technology transfer agent for the Speech and Language Sys- tems (SLS) program. Our ultimate goal is to make outside of the SLS program. The goals of the initial project are to create a technology transfer mechanism

  10. International Energy Agency Building Energy Simulation Test and Diagnostic Method (IEA BESTEST): In-Depth Diagnostic Cases for Ground Coupled Heat Transfer Related to Slab-on-Grade Construction

    SciTech Connect (OSTI)

    Neymark, J.; Judkoff, R.; Beausoleil-Morrison, I.; Ben-Nakhi, A.; Crowley, M.; Deru, M.; Henninger, R.; Ribberink, H.; Thornton, J.; Wijsman, A.; Witte, M.

    2008-09-01

    This report documents a set of idealized in-depth diagnostic test cases for use in validating ground-coupled floor slab heat transfer models. These test cases represent an extension to IEA BESTEST.

  11. Projects | MIT-Harvard Center for Excitonics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    two collaborative projects that build on our prior work: multiexcitons and charging in semiconductor nanocrystals, and sensitized triplet transfer for singlet exciton fission....

  12. Project Year Project Team

    E-Print Network [OSTI]

    Gray, Jeffrey J.

    Project Year 2001 Project Team Faculty: Grace Brush, Geography & Environmental Engineering, Whiting School of Engineering Fellow: Dan Bain, Geography & Environmental Engineering, Whiting School. Through this project, the team proposes to develop a variety of resources: a set of general, web

  13. Report on dipole-dipole resistivity and technology transfer at the Ahuachapan Geothermal field Ahuachapan, El Salvador

    SciTech Connect (OSTI)

    Fink, J.B. )

    1988-08-01

    The Ahuachapan Geothermal Field (AGF) is a 90 megawatt geothermal-sourced powerplant operated by the Comision Ejecutiva Hidroelectrica del Rio Lempa (CEL) of El Salvador. During the period November 1987 through May 1988 a deep resistivity survey and technology transfer was performed at the AGF at the request of Los Alamos National Laboratory (LANL) as part of a United States Agency for International Development (USAID) project. The resistivity surveying is ongoing at the time of this report under the supervision of CEL personnel. LANL and contract personnel were present at the site during performance of the initial surveying for the purpose of technology transfer. This report presents the results and interpretation of the two initial resistivity survey lines performed on site during and shortly after the technology transfer period.

  14. China's first 100% foreign equity power plant project

    SciTech Connect (OSTI)

    Manguen, Y.

    1998-07-01

    GEC ALSTHOM has acquired significant experience as an investor with large equity participating in private infrastructure projects. GEC ALSTHOM secured under a joint-venture with EDF the contract to design, finance, build, own, operate and transfer after 18 years the first 100 percent foreign equity power plant project in China, the 700 MW LAIBIN B project, after international competitive bidding. The total project cost amounts to 650 MUSD and the security package is complex and inventive. For the Chinese Government, the project constitutes a true scale test before finalizing the Act setting the legal framework for all future BOT projects in the country. The project, most notably, has been structured around commercial and foreign exchange obligations by the Regional Government but without any financial guarantee from it, nor from the Central Government nor from the State Bank of China, none of them being liable for the eventual reimbursement at the loans. Regarding political risks, COFACF has accepted to provide a cover to lenders against simply a general Letter of Support to the project by the Chinese authorities.

  15. Institute Recognizes Washington Closure Hanford as International Award Finalist

    Broader source: Energy.gov [DOE]

    RICHLAND, Wash. – The Project Management Institute (PMI) honored Hanford Site contractor Washington Closure Hanford (WCH) as a finalist for the international Project of the Year Award.

  16. COST TRANSFER INSTRUCTIONS If you are using the electronic version of the Cost Transfer form, you must ensure that each form has a new CTXXXXXXXX number. When you

    E-Print Network [OSTI]

    Tipple, Brett

    COST TRANSFER INSTRUCTIONS If you are using the electronic version of the Cost Transfer form, you and send it in with the same number. A Cost Transfer is an adjustment made sometime after an event has occurred which transfers costs from University projects or activities where the charges had been originally

  17. Technology Transfer The Research Profile of the Johannes Gutenberg University Mainz

    E-Print Network [OSTI]

    Kaus, Boris

    Science Research Technology Transfer The Research Profile of the Johannes Gutenberg University Mainz #12;#12;Science Research Technology Transfer 3 Foreword In light of the tough international Technology Transfer 38 Imprint Contents Science Research Technology Transfer 5 #12;Clear Commitment

  18. Air Leakage and Air Transfer Between Garage and Living Space

    SciTech Connect (OSTI)

    Rudd, Armin

    2014-09-01

    This research project focused on evaluation of air transfer between the garage and living space in a single-family detached home constructed by a production homebuilder in compliance with the 2009 International Residential Code and the 2009 International Energy Conservation Code. The project gathered important information about the performance of whole-building ventilation systems and garage ventilation systems as they relate to minimizing flow of contaminated air from garage to living space. A series of 25 multi-point fan pressurization tests and additional zone pressure diagnostic testing characterized the garage and house air leakage, the garage-to-house air leakage, and garage and house pressure relationships to each other and to outdoors using automated fan pressurization and pressure monitoring techniques. While the relative characteristics of this house may not represent the entire population of new construction configurations and air tightness levels (house and garage) throughout the country, the technical approach was conservative and should reasonably extend the usefulness of the results to a large spectrum of house configurations from this set of parametric tests in this one house. Based on the results of this testing, the two-step garage-to-house air leakage test protocol described above is recommended where whole-house exhaust ventilation is employed.

  19. DOE Funds 15 New Projects to Develop Solar Power Storage and...

    Energy Savers [EERE]

    projects: Advanced Heat Transfer Fluids Research and Development Symyx - Deep Eutectic Salt Formulations Suitable as Advanced Heat Transfer Fluids (Sunnyvale, Calif.) Symyx will...

  20. 2.61 Internal Combustion Engines, Spring 2004

    E-Print Network [OSTI]

    Heywood, John B.

    Fundamentals of how the design and operation of internal combustion engines affect their performance, operation, fuel requirements, and environmental impact. Study of fluid flow, thermodynamics, combustion, heat transfer ...

  1. Bioheat Transfer Valvano, page 1 Bioheat Transfer

    E-Print Network [OSTI]

    a technically challenging task. First, tissue heat transfer includes conduction, convection, radiation and by heat transfer due to blood flow near the probe. In vivo, the instrument measures effective thermal properties that are the combination of conductive and convective heat transfer. Thermal properties

  2. Coal. [Great Plains Project

    SciTech Connect (OSTI)

    Not Available

    1981-03-01

    The status of various research projects related to coal is considered: gasification (approximately 30 processes) and in-situ gasification. Methanol production, retrofitting internal combustion engines to stratified charge engines, methanation (Conoco), direct reduction of iron ores, water resources, etc. Approximately 200 specific projects related to coal are considered with respect to present status. (LTN)

  3. Air Leakage and Air Transfer Between Garage and Living Space

    SciTech Connect (OSTI)

    Rudd, A.

    2014-09-01

    This research project focused on evaluation of air transfer between the garage and living space in a single-family detached home constructed by a production homebuilder in compliance with the 2009 International Residential Code and the 2009 International Energy Conservation Code. The project gathered important information about the performance of whole-building ventilation systems and garage ventilation systems as they relate to minimizing flow of contaminated air from garage to living space. A series of 25 multi-point fan pressurization tests and additional zone pressure diagnostic testing characterized the garage and house air leakage, the garage-to-house air leakage, and garage and house pressure relationships to each other and to outdoors using automated fan pressurization and pressure monitoring techniques. While the relative characteristics of this house may not represent the entire population of new construction configurations and air tightness levels (house and garage) throughout the country, the technical approach was conservative and should reasonably extend the usefulness of the results to a large spectrum of house configurations from this set of parametric tests in this one house. Based on the results of this testing, the two-step garage-to-house air leakage test protocol described above is recommended where whole-house exhaust ventilation is employed. For houses employing whole-house supply ventilation (positive pressure) or balanced ventilation (same pressure effect as the Baseline condition), adherence to the EPA Indoor airPLUS house-to-garage air sealing requirements should be sufficient to expect little to no garage-to-house air transfer.

  4. Preliminary Notice of Violation, Washington Group International...

    Broader source: Energy.gov (indexed) [DOE]

    October 23, 2003 Issued to Washington Group International related to Falsification of Records and Procurement Deficiencies at the Advanced Mixed Waste Treatment Project at the...

  5. Twelve month follow-up report of the conference to promote international sales of US geothermal equipment (CORECT Project): Final report

    SciTech Connect (OSTI)

    Anderson, D.N.

    1988-12-01

    The reverse trade mission ''Conference to Promote International Sales of US Geothermal Equipment'' was organized and managed by the Geothermal Resources Council (GRC) in collaboration with the California Energy Commission (CEC). The mission was held in late September/October of 1987 and was well received by the 23 participants from 18 different countries. Approximately $275,000 in immediate sales can be attributed directly to the program and the estimate of potential future sales runs as high as $4,765,000. It was felt by the attendees that the program was well organized and executed and that the caliber of persons invited to attend was optimum. All of the attendees stated that the function was very informative and beneficial and that they would recommend to others that they attend similar functions. In order to be really effective in exporting a company, a country must be highly visible to potential purchasers. Although this function lasted only two weeks it was considered as a prime first step in the development of a strong US geothermal technology export base program. As a part of the effort to maintain this presence the GRC recommends that this function be followed by other similar functions, courses, seminars, and specific field trips. In addition every effort should be made for US government and industry representatives to visit various countries as often as possible. The GRC is working toward developing an international information-dissemination program, which would include the development of courses for geothermal units in foreign countries.

  6. Soluble pig for radioactive waste transfer lines

    SciTech Connect (OSTI)

    Ohl, P.C., Westinghouse Hanford

    1996-12-02

    Flushing transfer pipe after radioactive waste transfers generates thousands of gallons of additional radioactive waste each year at the Hanford site. The use of pneumatic pigging with waste soluble pigs as a means to clear transfer piping may be an effective alternative to raw water flushes. A feasibility study was performed by a group of senior mechanical engineering students for their senior design project as part of their curriculum at Washington State University. The students divided the feasibility study into three sub-projects involving: (1) materials research, (2) delivery system design, and (3) mockup fabrication and testing. The students screened through twenty-three candidate materials and selected a thermoplastic polymer combined 50:50 wt% with sucrose to meet the established material performance criteria. The students also prepared a conceptual design of a remote pneumatic delivery system and constructed a mockup section of transfer pipe for testing the prototype pigs.

  7. Long-term Performance of Engineered Barrier Systems (PEBS) - An International EURATOM Project on the Study and Testing of Engineered Barriers for the Final Disposal of HAW Using PEBS as an Example - 13299

    SciTech Connect (OSTI)

    Mente, M.

    2013-07-01

    The main aim of the PEBS project is to evaluate the sealing and barrier performance of the EBS over time, through development of a comprehensive approach involving experiments, model development, and consideration of the potential impacts on long-term safety functions. The experiments and models cover the full range of conditions, from initial emplacement of wastes (high heat generation and EBS re-saturation) through to later stage establishment of near steady state conditions, i.e. full re-saturation and thermal equilibrium with the host rock. These aspects will be integrated in a manner that will lead to greater certainty and thus greater confidence regarding the development from the initial transient state of the EBS to its long-term state, which provides the required isolation of the wastes. The work proposed within the project builds on existing knowledge and experience generated during recent years and supported by ongoing national and EC research programs. The project aims to provide a more complete description of the THM and THMC (thermo-hydro-mechanical- chemical) evolution of the EBS system, a more quantitative basis for relating the evolutionary behavior to the safety functions of the system, and a further clarification of the significance of residual uncertainties for long-term performance assessment. The importance of uncertainties arising from potential disagreement between the process models and the laboratory and in-situ experiments to be performed within PEBS, and their implications for an extrapolation of the results, will be reviewed, with particular emphasis on possible impacts on safety functions. In addition to the scientific-technical aims, the consortium will disseminate the basic findings to the broad scientific community within the EU, China and Japan, use expertise gained for public information purposes, and promote knowledge and technology transfer through training. (authors)

  8. International Entry Decision for Design Firms 

    E-Print Network [OSTI]

    Tohidi Vahdat, Amin

    2013-11-22

    International projects within the Architecture-Engineering-Construction (AEC) sector have increased both in number and in revenue during the past two decades. AEC companies seek projects outside of their home country at ...

  9. An International Year of Light

    E-Print Network [OSTI]

    Faure, Claudie

    of light-based technologies for the equitable development of global society. The project received, renewable energy and energy efficiency, and for PROSPECTUS An International Year of Light Science ­ Technology ­ Nature ­ Culture ­ Development

  10. CANISTER TRANSFER SYSTEM DESCRIPTION DOCUMENT

    SciTech Connect (OSTI)

    B. Gorpani

    2000-06-23

    The Canister Transfer System receives transportation casks containing large and small disposable canisters, unloads the canisters from the casks, stores the canisters as required, loads them into disposal containers (DCs), and prepares the empty casks for re-shipment. Cask unloading begins with cask inspection, sampling, and lid bolt removal operations. The cask lids are removed and the canisters are unloaded. Small canisters are loaded directly into a DC, or are stored until enough canisters are available to fill a DC. Large canisters are loaded directly into a DC. Transportation casks and related components are decontaminated as required, and empty casks are prepared for re-shipment. One independent, remotely operated canister transfer line is provided in the Waste Handling Building System. The canister transfer line consists of a Cask Transport System, Cask Preparation System, Canister Handling System, Disposal Container Transport System, an off-normal canister handling cell with a transfer tunnel connecting the two cells, and Control and Tracking System. The Canister Transfer System operating sequence begins with moving transportation casks to the cask preparation area with the Cask Transport System. The Cask Preparation System prepares the cask for unloading and consists of cask preparation manipulator, cask inspection and sampling equipment, and decontamination equipment. The Canister Handling System unloads the canister(s) and places them into a DC. Handling equipment consists of a bridge crane hoist, DC loading manipulator, lifting fixtures, and small canister staging racks. Once the cask has been unloaded, the Cask Preparation System decontaminates the cask exterior and returns it to the Carrier/Cask Handling System via the Cask Transport System. After the DC is fully loaded, the Disposal Container Transport System moves the DC to the Disposal Container Handling System for welding. To handle off-normal canisters, a separate off-normal canister handling cell is located adjacent to the canister transfer cell and is interconnected to the transfer cell by means of the off-normal canister transfer tunnel. All canister transfer operations are controlled by the Control and Tracking System. The system interfaces with the Carrier/Cask Handling System for incoming and outgoing transportation casks. The system also interfaces with the Disposal Container Handling System, which prepares the DC for loading and subsequently seals the loaded DC. The system support interfaces are the Waste Handling Building System and other internal Waste Handling Building (WHB) support systems.

  11. Requirements for Xenon International

    SciTech Connect (OSTI)

    Hayes, James C.; Ely, James H.

    2013-09-26

    This document defines the requirements for the new Xenon International radioxenon system. The output of this project will be a Pacific Northwest National Laboratory (PNNL) developed prototype and a manufacturer-developed production prototype. The two prototypes are intended to be as close to matching as possible; this will be facilitated by overlapping development cycles and open communication between PNNL and the manufacturer.

  12. International energy outlook 1994

    SciTech Connect (OSTI)

    Not Available

    1994-07-01

    The International Energy Outlook 1994 (IEO94) presents an assessment by the Energy Information Administration (EIA) of the outlook for international energy markets between 1990 and 2010. The report is provided as a statistical service to assist energy managers and analysts, both in government and in the private sector. These forecasts are used by international agencies, Federal and State governments, trade associations, and other planners and decisionmakers. They are published pursuant to the Depart. of Energy Organization Act of 1977 (Public Law 95-91), Section 205(c). The IEO94 projections are based on US and foreign government policies in effect on October 1, 1993-which means that provisions of the Climate Change Action Plan unveiled by the Administration in mid-October are not reflected by the US projections.

  13. Ready to Retrofit: The Process of Project Team Selection, Building Benchmarking, and Financing Commercial Building Energy Retrofit Projects

    E-Print Network [OSTI]

    Sanders, Mark D.

    2014-01-01

    contractor provides and finances energy improvements and isare three main ways to finance energy efficiency projects:use internal funds to finance energy-efficiency projects

  14. Wireless adiabatic power transfer

    SciTech Connect (OSTI)

    Rangelov, A.A., E-mail: rangelov@phys.uni-sofia.bg [Department of Physics, Sofia University, James Bourchier 5 blvd., 1164 Sofia (Bulgaria); Suchowski, H.; Silberberg, Y. [Department of Physics of Complex System, Weizmann Institute of Science, Rehovot 76100 (Israel); Vitanov, N.V. [Department of Physics, Sofia University, James Bourchier 5 blvd., 1164 Sofia (Bulgaria)

    2011-03-15

    Research Highlights: > Efficient and robust mid-range wireless energy transfer between two coils. > The adiabatic energy transfer is analogous to adiabatic passage in quantum optics. > Wireless energy transfer is insensitive to any resonant constraints. > Wireless energy transfer is insensitive to noise in the neighborhood of the coils. - Abstract: We propose a technique for efficient mid-range wireless power transfer between two coils, by adapting the process of adiabatic passage for a coherently driven two-state quantum system to the realm of wireless energy transfer. The proposed technique is shown to be robust to noise, resonant constraints, and other interferences that exist in the neighborhood of the coils.

  15. Kaiser Engineers Hanford internal position paper -- Project W-236A, Multi-function Waste Tank Facility -- Peer reviews of selected activities

    SciTech Connect (OSTI)

    Stine, M.D.

    1995-01-04

    The purpose of this paper is to develop and document a proposed position on the performance of independent peer reviews on selected design and analysis components of the Title 1 [Preliminary] and Title 2 [Final] design phases of the Multi-Function Waste Tank Facility [MWTF] project. An independent, third-party peer review is defined as a documented critical review of documents, data, designs, design inputs, tests, calculations, or related materials. The peer review should be conducted by persons independent of those who performed the work, but who are technically qualified to perform the original work. The peer review is used to assess the validity of assumptions and functional requirements, to assess the appropriateness and logic of selected methodologies and design inputs, and to verify calculations, analyses and computer software. The peer review can be conducted at the end of the design activity, at specific stages of the design process, or continuously and concurrently with the design activity. This latter method is often referred to as ``Continuous Peer Review.``

  16. NREL International& Environmental Programs (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2004-08-01

    NREL's International & Environmental programs work to bring renewable energy technologies to developing nations, and to improve health, local economies, community development, and the environment. These programs provide expertise throughout the world in rural energy, integrated resource assessment, technology options analysis, training on renewable energy topics, renewable energy policy assistance, greenhouse gas mitigation, clean energy technology transfer, rural electrification, and air quality protection.

  17. HEAT TRANSFER FLUIDS

    E-Print Network [OSTI]

    Lenert, Andrej

    2012-01-01

    The choice of heat transfer fluids has significant effects on the performance, cost, and reliability of solar thermal systems. In this chapter, we evaluate existing heat transfer fluids such as oils and molten salts based ...

  18. Amnesty International

    SciTech Connect (OSTI)

    None

    2006-04-11

    Martin Ennals est secrétaire général d'Amnesty International et fait un discours sur les droits de l'homme

  19. Amnesty International

    ScienceCinema (OSTI)

    None

    2011-04-25

    Martin Ennals est secrétaire général d'Amnesty International et fait un discours sur les droits de l'homme

  20. ENGINEERING INTERNATIONAL

    E-Print Network [OSTI]

    University of Technology, Sydney

    COURSE GUIDE 2013 UTS: ENGINEERING INTERNATIONAL UNDERGRADUATE w w w.eng.uts.edu.au #12;2 / ENGINEERING IN AUSTRALIA Internationally, Australian universities have a reputation for high quality research developed close links with many international institutions, particularly in Asia. ENGINEERING IN SYDNEY

  1. Heat Transfer Guest Editorial

    E-Print Network [OSTI]

    Kandlikar, Satish

    Journal of Heat Transfer Guest Editorial We are indeed delighted in bringing out this special issue was showcased in diverse areas such as traditional heat and mass transfer, lab-on-chip, sensors, biomedical applica- tions, micromixers, fuel cells, and microdevices. Selected papers in the field of heat transfer

  2. PROJECT PROFILE: Photovoltaic Stakeholder Engagement Initiatives

    Broader source: Energy.gov [DOE]

    This project is focused on independent stakeholder engagement activities conducted by Sandia National Laboratory relating to photovoltaic (PV) outreach at the national and international level.

  3. EM international activities. February 1997 highlights

    SciTech Connect (OSTI)

    1997-02-01

    EM International Highlights is a brief summary of on-going international projects within the Department of Energy`s Office of Environmental Management (EM). This document contains sections on: Global Issues, activities in Western Europe, activities in central and Eastern Europe, activities in Russia, activities in Asia and the Pacific Rim, activities in South America, activities in North America, and International Organizations.

  4. Technology transfer at CERN a study on inter-organizational knowledge transfer within multi-national R&D collaborations

    E-Print Network [OSTI]

    Huuse, H; Streit-Bianchi, M

    2004-01-01

    This study focus on the knowledge aspect of inter-organizational technology transfer projects. We have studied two large R&D collaborations where CERN is involved as one of several participating organizations, in order to reveal the causalities related to the knowledge transfer processes within these projects. The objective of the study is to understand how knowledge transfer happens, identify influencing factors to the process, and finally investigate the outcome of such processes. The study is founded on a thorough literature review where we examine different aspects of inter-organizational knowledge transfer. Based on the theory, we develop an analytic framework and establish different elements in the knowledge transfer process to study in more detail. This framework illustrates the relation between the different elements in a knowledge transfer process and provides the structure for our empirical foundation. We perform an explanatory embedded multiple case study and analyze our findings in terms of th...

  5. Sensitivity Analysis of the Gap Heat Transfer Model in BISON.

    SciTech Connect (OSTI)

    Swiler, Laura Painton; Schmidt, Rodney C.; Williamson, Richard; Perez, Danielle

    2014-10-01

    This report summarizes the result of a NEAMS project focused on sensitivity analysis of the heat transfer model in the gap between the fuel rod and the cladding used in the BISON fuel performance code of Idaho National Laboratory. Using the gap heat transfer models in BISON, the sensitivity of the modeling parameters and the associated responses is investigated. The study results in a quantitative assessment of the role of various parameters in the analysis of gap heat transfer in nuclear fuel.

  6. Heat transfer system

    DOE Patents [OSTI]

    Not Available

    1980-03-07

    A heat transfer system for a nuclear reactor is described. Heat transfer is accomplished within a sealed vapor chamber which is substantially evacuated prior to use. A heat transfer medium, which is liquid at the design operating temperatures, transfers heat from tubes interposed in the reactor primary loop to spaced tubes connected to a steam line for power generation purposes. Heat transfer is accomplished by a two-phase liquid-vapor-liquid process as used in heat pipes. Condensible gases are removed from the vapor chamber through a vertical extension in open communication with the chamber interior.

  7. Heat transfer system

    DOE Patents [OSTI]

    McGuire, Joseph C. (Richland, WA)

    1982-01-01

    A heat transfer system for a nuclear reactor. Heat transfer is accomplished within a sealed vapor chamber which is substantially evacuated prior to use. A heat transfer medium, which is liquid at the design operating temperatures, transfers heat from tubes interposed in the reactor primary loop to spaced tubes connected to a steam line for power generation purposes. Heat transfer is accomplished by a two-phase liquid-vapor-liquid process as used in heat pipes. Condensible gases are removed from the vapor chamber through a vertical extension in open communication with the chamber interior.

  8. Design Criteria for Bagless Transfer System (BTS) Packaging System

    SciTech Connect (OSTI)

    RISENMAY, H.R.

    2000-04-26

    This document provides the criteria for the design and installation of a Bagless Transfer System (BTS); Blend, Sieve and Balance Equipment; and Supercritical Fluid Extraction System (SFE). The project consists of 3 major modules: (1) Bagless Transfer System (BTS) Module; (2) Blend, Sieve and Balance Equipment; and (3) Supercritical Fluid Extraction (SFE) Module.

  9. Cost Transfer Request: Payroll University of Florida Journal Entry # _________________________ Date: ______________________

    E-Print Network [OSTI]

    Sin, Peter

    Cost Transfer Request: Payroll University of Florida Journal Entry # _________________________ Date: ______________________ 1. Why was this expense originally charged to the cost center(s) from which it is now being the project benefit from the expense). 3. Is this cost transfer submitted within 90 days from the end

  10. Use of international data sets to evaluate and validate pathway assessment models applicable to exposure and dose reconstruction at DOE facilities. Progress report, August 1993--January 1994

    SciTech Connect (OSTI)

    Hendrickson, S.M.; Hoffman, F.O.

    1994-03-01

    This project, ``Use of International Data Sets to Evaluate and Validate Pathway Assessment Models Applicable to Exposure and Dose Reconstruction at DOE Facilities,`` grew out of several activities being conducted by the Principal Investigator Dr. F Owen Hoffman. One activity was originally part of the Chernobyl Studies Project and began as Task 7.1D, ``Internal Dose From Direct Contamination of Terrestrial Food Sources.`` The objective of Task 7.1D was to (1) establish a collaborative US USSR effort to improve and validate our methods of forecasting doses and dose commitments from the direct contamination of food sources, and (2) perform experiments and validation studies to improve our ability to predict rapidly and accurately the long-term internal dose from the contamination of agricultural soil. The latter was to include the consideration of remedial measures to block contamination of food grown on contaminated soil. The current objective of this project is to evaluate and validate pathway-assessment models applicable to exposure and dose reconstruction at DOE facilities through use of international data sets. This project incorporates the activity of Task 7.1D into a multinational effort to evaluate data used for the prediction of radionuclide transfer through agricultural and aquatic systems to humans. It also includes participation in two multinational studies, BIOMOVS (BIOspheric MOdel Validation Study) with the Swedish National Institute for Radiation Protection and VAMP (VAlidation of Model Predictions) with the International Atomic Energy Agency, that address testing the performance of models of radionuclide transport through foodchains.

  11. Comment on Influence of convective boundary condition on double diffusive mixed convection from a permeable vertical surface, by P.M. Patil, E. Momoniat, S. Roy, International Journal of Heat and Mass Transfer, 70 (2014) 313-321

    E-Print Network [OSTI]

    Pantokratoras, Asterios

    2014-01-01

    In the above paper the authors treat the boundary layer flow along a stationary, vertical, permeable, flat plate within a vertical free stream. Fluid is sucked or injected through the vertical plate. The fluid species concentration at the plate is constant and different from that of the ambient fluid. It is also assumed that the plate is heated by convection from another fluid with constant temperature with a constant heat transfer coefficient. The temperature and species concentration difference between the plate and the ambient fluid creates buoyancy forces and the flow is characterized as mixed convection. The partial differential equations of the boundary layer flow (Eqs. 1-4 in their paper) are transformed and subsequently are solved numerically using an implicit finite difference scheme in combination with a quasi-linearization technique. The quasi-linearization technique is a Newton-Raphson method. The results are presented in 12 figures.

  12. International Clean Energy Coalition

    SciTech Connect (OSTI)

    Erin Skootsky; Matt Gardner; Bevan Flansburgh

    2010-09-28

    In 2003, the National Association of Regulatory Utility Commissioners (NARUC) and National Energy Technology Laboratories (NETL) collaboratively established the International Clean Energy Coalition (ICEC). The coalition consisting of energy policy-makers, technologists, and financial institutions was designed to assist developing countries in forming and supporting local approaches to greenhouse gas mitigation within the energy sector. ICEC's work focused on capacity building and clean energy deployment in countries that rely heavily on fossil-based electric generation. Under ICEC, the coalition formed a steering committee consisting of NARUC members and held a series of meetings to develop and manage the workplan and define successful outcomes for the projects. ICEC identified India as a target country for their work and completed a country assessment that helped ICEC build a framework for discussion with Indian energy decisionmakers including two follow-on in-country workshops. As of the conclusion of the project in 2010, ICEC had also conducted outreach activities conducted during United Nations Framework Convention on Climate Change (UNFCCC) Ninth Conference of Parties (COP 9) and COP 10. The broad goal of this project was to develop a coalition of decision-makers, technologists, and financial institutions to assist developing countries in implementing affordable, effective and resource appropriate technology and policy strategies to mitigate greenhouse gas emissions. Project goals were met through international forums, a country assessment, and in-country workshops. This project focused on countries that rely heavily on fossil-based electric generation.

  13. International energy outlook 1998

    SciTech Connect (OSTI)

    1998-04-01

    The International Energy Outlook 1998 (IEO98) presents an assessment by the Energy Information Administration (EIA) of the outlook for international energy markets through 2020. Projections in IEO98 are displaced according to six basic country groupings. The industrialized region includes projections for four individual countries -- the United States, Canada, Mexico, and Japan -- along with the subgroups Western Europe and Australasia (defined as Australia, New Zealand, and the US Territories). The developing countries are represented by four separate regional subgroups: developing Asia, Africa, Middle East, and Central and South America. China and India are represented in developing Asia. New to this year`s report, country-level projections are provided for Brazil -- which is represented in Central and South America. Eastern Europe and the former Soviet Union (EE/FSU) are considered as a separate country grouping. The report begins with a review of world trends in energy demand. Regional consumption projections for oil, natural gas, coal, nuclear power, and renewable energy (hydroelectricity, geothermal, wind, solar, and other renewables) are presented in five fuel chapters, with a review of the current status of each fuel on a worldwide basis. Summary tables of the IEO98 projections for world energy consumption, carbon emissions, oil production, and nuclear power generating capacity are provided in Appendix A. 88 figs., 77 tabs.

  14. Nanoscale Heat Transfer at Contact Between a Hot Tip and a Substrate Stphane Lefvre

    E-Print Network [OSTI]

    Boyer, Edmond

    Nanoscale Heat Transfer at Contact Between a Hot Tip and a Substrate Stéphane Lefèvre Laboratoire d three heat transfer modes with experimental data and modeling. We conclude that the three modes in "International Journal of Heat and Mass Transfer 49, 1-2 (2006) 251-258" DOI : 10.1016/j.ijheatmasstransfer.2005

  15. The Python Development Project 5.1 Introduction

    E-Print Network [OSTI]

    Ford, David N.

    Chapter 5 The Python Development Project 5.1 Introduction This chapter describes the calibration of the Product Development Project Model to a specific development project and its use to investigate a project management policy. The project will be referred to as the Python development project and International Chip

  16. 2015 DOE Acquisition and Project Management (APM) Workshop Presentatio...

    Energy Savers [EERE]

    Fellows Program 0900 Mike Morgan - Government Relations Manager - Project Management Institute (PMI) Pulse of the Profession - PMI 2015 Pulse Knowledge Transfer of DOE...

  17. 2015 DOE Acquisition and Project Management (APM) Workshop Presentatio...

    Broader source: Energy.gov (indexed) [DOE]

    0900 Mike Morgan - Government Relations Manager - Project Management Institute (PMI) Pulse of the Profession - PMI 2015 Pulse Knowledge Transfer of DOE 1000 Bob Raines,...

  18. First Commercial, Grid-Connected, Hydrokinetic Tidal Energy Project...

    Office of Science (SC) Website

    First Commercial, Grid-Connected, Hydrokinetic Tidal Energy Project in North America Small Business Innovation Research (SBIR) and Small Business Technology Transfer (STTR) SBIR...

  19. The Impact of Heat Transfer Enhancement Techniques on Energy Savings in the U.S. Industry 

    E-Print Network [OSTI]

    Rebello, W. J.; Peterson, G. R.; Sohal, M.

    1988-01-01

    hydrocarbons in kettle reboilers in refineries. Finned tubing is now available in corrosion resistant materials, such as, titanium, Inconel, Hastelloy and stain less steel. In the past, finning techniques were developed for ductile, easy... and Internally Finned Tubes", J.of Heat Transfer vlOO, nl,Feb. 1978. 12. R. L. Webb, "Performance Evalu tion Criteria for Use of Enhanced Heat Transfer Surfaces in Heat Exchanger Design", International Journal of Heat and Mass Transfer, v24, n4, pp715, 1981...

  20. International energy outlook 2006

    SciTech Connect (OSTI)

    2006-06-15

    This report presents international energy projections through 2030, prepared by the Energy Information Administration. After a chapter entitled 'Highlights', the report begins with a review of world energy and economic outlook, followed by energy consumption by end-use sector. The next chapter is on world oil markets. Natural gas, world coal market and electricity consumption and supply are then discussed. The final chapter covers energy-related carbon dioxide emissions.

  1. Degree project in Communication Systems

    E-Print Network [OSTI]

    Maguire Jr., Gerald Q.

    Degree project in Communication Systems Second level, 30.0 HEC Stockholm, Sweden N I N A M U L K I J A N YA N International SMS Route Analysis Evaluation Procedure for QoS of Short Message Service Evaluation Procedure for QoS of Short Message Service International SMS Route Analysis Master's Thesis Nina

  2. Use of international data sets to evaluate and validate pathway assessment models applicable to exposure and dose reconstruction at DOE facilities. Progress report, March--May 1994

    SciTech Connect (OSTI)

    Anspaugh, L.R.; Hendrickson, S.M.; Hoffman, F.O.

    1994-06-01

    The project described in this report was the result of a Memorandum of Cooperation between the US and the former-USSR following the accident at the Chernobyl Nuclear Power Plant Unit 4. A joint program was established to improve the safety of nuclear power plants and to understand the implications of environmental releases. The task of Working Group 7 was ``to develop jointly methods to project rapidly the health effects of any future nuclear reactor accident.`` The current objective of this project is to evaluate and validate pathway-assessment models applicable to exposure and dose reconstruction at DOE facilities through use of international data sets. This project incorporates data used for the prediction of radionuclide transfer through agricultural and aquatic systems to humans. It also includes participation in two multinational studies, BIOMOVS (Biospheric Model Validation Study) with the Swedish National Institute for Radiation Protection and VAMP (Validation of Model Predictions) with the International Atomic Energy Agency, that address testing the performance of models of radionuclide transport through foodchains. In the future, this project will be considered separately from the Chernobyl Studies Project and the essential activities of former Task 7.1D will be folded within the broader umbrella of the BIOMOVS and VAMP projects. The Working Group Leader of Task 7.1D will continue to provide oversight for this project.

  3. The Human Genome Diversity Project

    SciTech Connect (OSTI)

    Cavalli-Sforza, L.

    1994-12-31

    The Human Genome Diversity Project (HGD Project) is an international anthropology project that seeks to study the genetic richness of the entire human species. This kind of genetic information can add a unique thread to the tapestry knowledge of humanity. Culture, environment, history, and other factors are often more important, but humanity`s genetic heritage, when analyzed with recent technology, brings another type of evidence for understanding species` past and present. The Project will deepen the understanding of this genetic richness and show both humanity`s diversity and its deep and underlying unity. The HGD Project is still largely in its planning stages, seeking the best ways to reach its goals. The continuing discussions of the Project, throughout the world, should improve the plans for the Project and their implementation. The Project is as global as humanity itself; its implementation will require the kinds of partnerships among different nations and cultures that make the involvement of UNESCO and other international organizations particularly appropriate. The author will briefly discuss the Project`s history, describe the Project, set out the core principles of the Project, and demonstrate how the Project will help combat the scourge of racism.

  4. Accounting Projects Company Description

    E-Print Network [OSTI]

    Dahl, David B.

    and international tax work for individuals, closely held companies, family offices and clients expecting a liquidityAccounting Projects Company Description: CPA firm performing accounting services, bookkeeping. Company Description: a full service CPA firm headquartered in the San Francisco Bay Area. Nationally

  5. Fuel transfer system

    DOE Patents [OSTI]

    Townsend, H.E.; Barbanti, G.

    1994-03-01

    A nuclear fuel bundle fuel transfer system includes a transfer pool containing water at a level above a reactor core. A fuel transfer machine therein includes a carriage disposed in the transfer pool and under the water for transporting fuel bundles. The carriage is selectively movable through the water in the transfer pool and individual fuel bundles are carried vertically in the carriage. In a preferred embodiment, a first movable bridge is disposed over an upper pool containing the reactor core, and a second movable bridge is disposed over a fuel storage pool, with the transfer pool being disposed therebetween. A fuel bundle may be moved by the first bridge from the reactor core and loaded into the carriage which transports the fuel bundle to the second bridge which picks up the fuel bundle and carries it to the fuel storage pool. 6 figures.

  6. Fuel transfer system

    DOE Patents [OSTI]

    Townsend, Harold E. (Campbell, CA); Barbanti, Giancarlo (Cupertino, CA)

    1994-01-01

    A nuclear fuel bundle fuel transfer system includes a transfer pool containing water at a level above a reactor core. A fuel transfer machine therein includes a carriage disposed in the transfer pool and under the water for transporting fuel bundles. The carriage is selectively movable through the water in the transfer pool and individual fuel bundles are carried vertically in the carriage. In a preferred embodiment, a first movable bridge is disposed over an upper pool containing the reactor core, and a second movable bridge is disposed over a fuel storage pool, with the transfer pool being disposed therebetween. A fuel bundle may be moved by the first bridge from the reactor core and loaded into the carriage which transports the fuel bundle to the second bridge which picks up the fuel bundle and carries it to the fuel storage pool.

  7. ASSEMBLY TRANSFER SYSTEM DESCRIPTION DOCUMENT

    SciTech Connect (OSTI)

    B. Gorpani

    2000-06-26

    The Assembly Transfer System (ATS) receives, cools, and opens rail and truck transportation casks from the Carrier/Cask Handling System (CCHS). The system unloads transportation casks consisting of bare Spent Nuclear Fuel (SNF) assemblies, single element canisters, and Dual Purpose Canisters (DPCs). For casks containing DPCs, the system opens the DPCs and unloads the SNF. The system stages the assemblies, transfer assemblies to and from fuel-blending inventory pools, loads them into Disposal Containers (DCs), temporarily seals and inerts the DC, decontaminates the DC and transfers it to the Disposal Container Handling System. The system also prepares empty casks and DPCs for off-site shipment. Two identical Assembly Transfer System lines are provided in the Waste Handling Building (WHB). Each line operates independently to handle the waste transfer throughput and to support maintenance operations. Each system line primarily consists of wet and dry handling areas. The wet handling area includes a cask transport system, cask and DPC preparation system, and a wet assembly handling system. The basket transport system forms the transition between the wet and dry handling areas. The dry handling area includes the dry assembly handling system, assembly drying system, DC preparation system, and DC transport system. Both the wet and dry handling areas are controlled by the control and tracking system. The system operating sequence begins with moving transportation casks to the cask preparation area. The cask preparation operations consist of cask cavity gas sampling, cask venting, cask cool-down, outer lid removal, and inner shield plug lifting fixture attachment. Casks containing bare SNF (no DPC) are filled with water and placed in the cask unloading pool. The inner shield plugs are removed underwater. For casks containing a DPC, the cask lid(s) is removed, and the DPC is penetrated, sampled, vented, and cooled. A DPC lifting fixture is attached and the cask is placed into the cask unloading pool. In the cask unloading pool the DPC is removed from the cask and placed in an overpack and the DPC lid is severed and removed. Assemblies are removed from either an open cask or DPC and loaded into assembly baskets positioned in the basket staging rack in the assembly unloading pool. A method called ''blending'' is utilized to load DCs with a heat output of less than 11.8 kW. This involves combining hotter and cooler assemblies from different baskets. Blending requires storing some of the hotter fuel assemblies in fuel-blending inventory pools until cooler assemblies are available. The assembly baskets are then transferred from the basket staging rack to the assembly handling cell and loaded into the assembly drying vessels. After drying, the assemblies are removed from the assembly drying vessels and loaded into a DC positioned below the DC load port. After installation of a DC inner lid and temporary sealing device, the DC is transferred to the DC decontamination cell where the top area of the DC, the DC lifting collar, and the DC inner lid and temporary sealing device are decontaminated, and the DC is evacuated and backfilled with inert gas to prevent prolonged clad exposure to air. The DC is then transferred to the Disposal Container Handling System for lid welding. In another cask preparation and decontamination area, lids are replaced on the empty transportation casks and DPC overpacks, the casks and DPC overpacks are decontaminated, inspected, and transferred to the Carrier/Cask Handling System for shipment off-site. All system equipment is designed to facilitate manual or remote operation, decontamination, and maintenance. The system interfaces with the Carrier/Cask Handling System for incoming and outgoing transportation casks and DPCs. The system also interfaces with the Disposal Container Handling System, which prepares the DC for loading and subsequently seals the loaded DC. The system support interfaces are the Waste Handling Building System and other internal WHB support systems.

  8. Facility Survey & Transfer

    Broader source: Energy.gov [DOE]

    As DOE facilities become excess, many that are radioactively and/or chemically contaminated will become candidate for transfer to DOE-EM for deactivation and decommissioning.

  9. CRIS Project Internal DASNR Compliance Checklist

    E-Print Network [OSTI]

    to Animals, Plants, or Humans Radioactive Materials or Yes No If yes, attach copy of Radiation Sa X Hazardous Chemicals Yes No If yes, indicate the date the Chemi Inventory List was submitted to O Risk

  10. List of International Projects for FY 2012

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on DeliciousMathematicsEnergyInterested Parties - WAPA PublicLED ADOPTIONtoLightingEnergy Lintgram #59,Selected

  11. International Advisory Committee for the WCI project

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverseIMPACT EVALUATION PLANIsProcess RelevantInternalmagnetic fieldAdvisory

  12. Project Title: Prisoner Counselling Effectiveness

    E-Print Network [OSTI]

    Hickman, Mark

    : Martin Visser, John George Academic Supervisor: Andrew Frost Project Reference Number: S112/PrisonersTrustProject Title: Prisoner Counselling Effectiveness Bachelor of Arts Internship Company/Organization: The Counselling Service for Prisoners Trust Intern Position Title: Methodology Evaluator Organisation Supervisor

  13. Experimental investigation on heat transfer for two-phase flow under natural convection

    SciTech Connect (OSTI)

    Amizic, Milan; Guyez, Estelle; Seiler, Jean-Marie

    2012-07-01

    In the frame of severe accident research for the second and the third generation of nuclear power plants, some aspects of the concrete cavity ablation during the molten corium - concrete interaction are still remaining issues. The determination of heat transfer along the interfacial region between the molten corium pool and the ablating basemat concrete is crucial for the assessment of concrete ablation progression and eventually the basemat melt-through. For the purpose of experimental investigation of thermal-hydraulics inside a liquid pool agitated by gas bubbles, the CLARA project has been launched jointly by CEA, EDF, IRSN, GDF-Suez and SARNET. The CLARA experiments are performed using simulant materials and they reveal the influence of superficial gas velocity, liquid viscosity and pool geometry on the heat transfer coefficient between the internally heated liquid pool and vertical and horizontal pool walls maintained at uniform temperature. The first test campaign has been conducted with the smallest pool configuration (50 cm x 25 cm x 25 cm). The tests have been performed with liquids covering a wide range of dynamic viscosity from approximately 1 mPa s to 10000 mPa s. This paper presents some preliminary conclusions deduced from the experiments which involve a liquid pool with the gas injection only from the bottom plate. A comparison with existing models for the assessment of heat transfer has also been carried out. (authors)

  14. Cost Transfer Procedure The University of Delaware has a stewardship responsibility for all sponsored funds; proper

    E-Print Network [OSTI]

    Firestone, Jeremy

    - 1 - Cost Transfer Procedure Summary The University of Delaware has a stewardship responsibility this obligation. The University recognizes that cost transfers are sometimes necessary to correct bookkeeping, and inadequately explained transfers, especially those involving projects with cost overruns or unexpended balances

  15. Wireless adiabatic power transfer

    E-Print Network [OSTI]

    A. A. Rangelov; H. Suchowski; Y. Silberberg; N. V. Vitanov

    2010-10-30

    We propose a technique for efficient mid-range wireless power transfer between two coils, by adapting the process of adiabatic passage for a coherently driven two-state quantum system to the realm of wireless energy transfer. The proposed technique is shown to be robust to noise, resonant constraints, and other interferences that exist in the neighborhood of the coils.

  16. Project Year Project Team

    E-Print Network [OSTI]

    Gray, Jeffrey J.

    & Sciences Project Title Visualize Physical Principles with Virtual Lab Modules Audience Undergraduate provide easy access to digital information, but don't provide experience with right- hand screws, electric of the last generation of physics students. The result is that today's students don't have an intuitive

  17. Project Year Project Title

    E-Print Network [OSTI]

    Gray, Jeffrey J.

    . Pedagogical Issue One of the challenges in teaching the Introduction to Computer Music course is the lack flow and practices. These resources will provide an online space through which students will be able piece of this project will be an animated studio walkthrough requiring user interaction and providing

  18. UMTRA Project document control system manual

    SciTech Connect (OSTI)

    Not Available

    1994-09-01

    This manual defines the Project Document Control System (PDCS) operated by the US DOE Uranium Mill tailings Remedial Action (UMTRA) project Office. The purpose of the PDCS is to provide an active and continuing program for acquiring, controlling, retaining, retrieving, retiring and disposing of all UMTRA Project documents. The PDCS also provides guidance and coordination in transferring documents by various UMTRA Projection document control centers to a central location.

  19. Putting 'international' back in IPEC.

    SciTech Connect (OSTI)

    Veil, J. A.

    2000-10-27

    During the previous six annual sessions of the International Petroleum Environmental Conference (IPEC), little attention has been given to international issues. Although the US is clearly a leader in oil field research and regulatory development information is available on interesting projects throughout the world Many participants in IPEC have little exposure to international oil and gas environmental problems and solutions. Beginning with the 7th IPEC, a stronger effort is being made to include international issues in the confidence. This paper describes some of the author's experiences in working with international oil and gas environmental issues in North America, Latin America, Europe, and Asia. Among the topics to be discussed are the issues that developing oil and gas-producing nations face and the need for sensitivity to other nation's cultures and legal systems.

  20. Technology transfer 1994

    SciTech Connect (OSTI)

    Not Available

    1994-01-01

    This document, Technology Transfer 94, is intended to communicate that there are many opportunities available to US industry and academic institutions to work with DOE and its laboratories and facilities in the vital activity of improving technology transfer to meet national needs. It has seven major sections: Introduction, Technology Transfer Activities, Access to Laboratories and Facilities, Laboratories and Facilities, DOE Office, Technologies, and an Index. Technology Transfer Activities highlights DOE`s recent developments in technology transfer and describes plans for the future. Access to Laboratories and Facilities describes the many avenues for cooperative interaction between DOE laboratories or facilities and industry, academia, and other government agencies. Laboratories and Facilities profiles the DOE laboratories and facilities involved in technology transfer and presents information on their missions, programs, expertise, facilities, and equipment, along with data on whom to contact for additional information on technology transfer. DOE Offices summarizes the major research and development programs within DOE. It also contains information on how to access DOE scientific and technical information. Technologies provides descriptions of some of the new technologies developed at DOE laboratories and facilities.

  1. Space-Time Galerkin Projection of Electro-Magnetic Fields

    E-Print Network [OSTI]

    Wang, Zifu; Hofmann, Heath

    2015-01-01

    Spatial Galerkin projection transfers fields between different meshes. In the area of finite element analysis of electromagnetic fields, it provides great convenience for remeshing, multi-physics, domain decomposition methods, etc. In this paper, a space-time Galerkin projection is developed in order to transfer fields between different spatial and temporal discretization bases.

  2. Vice President Biden Announces New SunShot Projects and Funding...

    Office of Environmental Management (EM)

    Vice President Biden Announces New SunShot Projects and Funding Opportunities at Solar Power International Conference Vice President Biden Announces New SunShot Projects and...

  3. 2006 Augmented Cognition International, San Francisco

    E-Print Network [OSTI]

    Allison, Robert

    2 EGI Project Team · Neural Avionics Team ­ Operator Performance Laboratory (OPL) · Neurology;2006 Augmented Cognition International, San Francisco 4 EGI Neural Avionics · Complex avionics may reach EGI Neural Avionics Model · State data ­ Aircraft ­ Mission ­ Automation ­ Human · Classification

  4. HEAT AND MOISTURE TRANSFER THROUGH CLOTHING

    E-Print Network [OSTI]

    Voelker, Conrad; Hoffmann, Sabine; Kornadt, Oliver; Arens, Edward; Zhang, Hui; Huizenga, Charlie

    2009-01-01

    R. C. Eberhart (ed), Heat transfer in medicine and biology.between convective heat transfer and mass transferConvective and radiative heat transfer coefficients for

  5. Heat and moisture transfer through clothing

    E-Print Network [OSTI]

    Voelker, Conrad; Hoffmann, Sabine; Kornadt, Oliver; Arens, Edward; Zhang, Hui; Huizenga, Charlie

    2009-01-01

    R. C. Eberhart (ed), Heat transfer in medicine and biology.Convective and radiative heat transfer coefficients forbetween convective heat transfer and mass transfer

  6. Ames Lab 101: Technology Transfer

    ScienceCinema (OSTI)

    Covey, Debra

    2012-08-29

    Ames Laboratory Associate Laboratory Director, Sponsored Research Administration, Debra Covey discusses technology transfer. Covey also discusses Ames Laboratory's most successful transfer, lead-free solder.

  7. Project Controls

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1997-03-28

    Project controls are systems used to plan, schedule, budget, and measure the performance of a project/program. The cost estimation package is one of the documents that is used to establish the baseline for project controls. This chapter gives a brief description of project controls and the role the cost estimation package plays.

  8. Overview of the International Design

    E-Print Network [OSTI]

    McDonald, Kirk

    at ejection. Example with 6 bunches #12;12 Linac-based proton Driver Project X design criteria: 2 MW of beamOverview of the International Design for the Neutrino Factory (IDSNF) Accelerator systems G. Prior European Organization for Nuclear Research (CERN) Muon acceleration for particle physics & MICE

  9. Multiscale photosynthetic exciton transfer

    E-Print Network [OSTI]

    A. K. Ringsmuth; G. J. Milburn; T. M. Stace

    2012-06-14

    Photosynthetic light harvesting provides a natural blueprint for bioengineered and biomimetic solar energy and light detection technologies. Recent evidence suggests some individual light harvesting protein complexes (LHCs) and LHC subunits efficiently transfer excitons towards chemical reaction centers (RCs) via an interplay between excitonic quantum coherence, resonant protein vibrations, and thermal decoherence. The role of coherence in vivo is unclear however, where excitons are transferred through multi-LHC/RC aggregates over distances typically large compared with intra-LHC scales. Here we assess the possibility of long-range coherent transfer in a simple chromophore network with disordered site and transfer coupling energies. Through renormalization we find that, surprisingly, decoherence is diminished at larger scales, and long-range coherence is facilitated by chromophoric clustering. Conversely, static disorder in the site energies grows with length scale, forcing localization. Our results suggest sustained coherent exciton transfer may be possible over distances large compared with nearest-neighbour (n-n) chromophore separations, at physiological temperatures, in a clustered network with small static disorder. This may support findings suggesting long-range coherence in algal chloroplasts, and provides a framework for engineering large chromophore or quantum dot high-temperature exciton transfer networks.

  10. Final report to the Department of Energy: Green Schools Project DE-FC01-99EE10685. Schools for the 21st century: Transferring the Green Schools experience

    SciTech Connect (OSTI)

    Harrigan, Merrilee

    2002-01-15

    This report describes five major activities that the Alliance to Save Energy performed for the years 2000 and 2001 to support and compliment DOE's Energy Smart Schools Partnership. The major tasks under this project were to: (1) Promote the School Efficiency Peer Exchange program for school personnel; (2) develop the Earth Apple Awards program and disseminate the best award-winning ideas; (3) link Green Schools with Rebuilt with at least one metropolitan area such as Philadelphia or Buffalo; (4) support Rebuild/Energy Smart Schools through working at the state level to develop business, state, and local government and through making presentations in support of school efficiency; (5) update the curriculum search originally conducted in 1995.

  11. Internal shim

    DOE Patents [OSTI]

    Barth, Clyde H.; Blizinski, Theodore W.

    2003-05-13

    An internal shim used to accurately measure spaces in conjunction with a standard small probe has a shim top and a chassis. The internal shim is adjustably fixed within the space to be measured using grippers that emerge from the chassis and which are controlled by an arm pivotably attached to the shim top. A standard small probe passes through the shim along guides on the chassis and measures the distance between the exterior of the chassis and the boundary. By summing the measurements on each side of the chassis and the width of the chassis, the dimension of the space can be determined to within 0.001 inches.

  12. Policy on Cost Transfer Policy on Cost Transfer

    E-Print Network [OSTI]

    Sridhar, Srinivas

    Policy on Cost Transfer 12/22/2014 Policy on Cost Transfer I. Purpose and Scope The University has posting of a cost to the general ledger, initiated by payroll charges, purchase orders or check requests (and the purchasing card). Cost Transfer means any subsequent transfer of the original charge

  13. Proceedings of Heat Transfer 2003: ASME Summer Heat Transfer Conference

    E-Print Network [OSTI]

    Kandlikar, Satish

    Proceedings of Heat Transfer 2003: ASME Summer Heat Transfer Conference Las Vegas, Nevada, USA July 21-23, 2003 HT2003-47449 HEAT TRANSFER FROM A MOVING AND EVAPORATING MENISCUS ON A HEATED SURFACE meniscus with complete evaporation of water without any meniscus break-up. The experimental heat transfer

  14. The International Linear Collider

    E-Print Network [OSTI]

    Marco Battaglia

    2007-05-28

    The International Linear Collider (ILC) is the next large scale project in accelerator particle physics. Colliding electrons with positrons at energies from 0.3 TeV up to about 1 TeV, the ILC is expected to provide the accuracy needed to complement the LHC data and extend the sensitivity to new phenomena at the high energy frontier and answer some of the fundamental questions in particle physics and in its relation to Cosmology. This paper reviews some highlights of the ILC physics program and some of the major challenges for the accelerator and detector design.

  15. Recent California water transfers: Emerging options in water management. Final report

    SciTech Connect (OSTI)

    Lund, J.R.; Israel, M.

    1992-12-01

    Report examines the recent use of water transfers in California. Emphasis is on the use of water transfers during the current drought and how planners and operators of federal, state, and local systems can integrate water transfers into the planning and operations of their systems. Through the California experience, the study identifies motivations for incorporating water transfers into water supply systems, reviews a variety of water transfer types, and discusses the integration of water transfers with traditional supply argumentation and water conservation measures. Limitations, constraints, and difficulties for employing water transfers within existing systems are also discussed. The study focuses primarily on the technical, planning, and operational aspects of water transfers, rather than the legal, economic, and social implications. Water transfers, Water management, Water bank, Water supply, Water use, Water institutions, Infrastructure, California state water project, Water rights, Drought, Surface water, Groundwater.

  16. Accelerating the transfer in Technology Transfer

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 OutreachProductswsicloudwsicloudden Documentation DataStreamsTotalproposalsAboutAccelerating the transfer in

  17. Technology Cooperation Agreement Pilot Project development-friendly greenhouse gas reduction, May 1999 update

    SciTech Connect (OSTI)

    Benioff, R.

    1999-05-11

    The Technology Cooperation Agreement Pilot Project (TCAPP) was launched by several U.S. Government agencies (USAID, EPA and DOE) in August 1997 to establish a model for climate change technology cooperation with developing and transition countries. TCAPP is currently facilitating voluntary partnerships between the governments of Brazil, China, Kazakhstan, Korea, Mexico, and the Philippines, the private sector, and the donor community on a common set of actions that will advance implementation of clean energy technologies. The six participating countries have been actively engaged in shaping this initiative along with international donors and the private sector. This program helps fulfill the US obligation to support technology transfer to developing countries under Article 4.5 of the United Nations Framework Convention on Climate Change. TCAPP also provides a mechanism to focus resources across international donor programs on the technology cooperation needs of developing and transition countries.

  18. International Cooperation

    E-Print Network [OSTI]

    Banbara, Mutsunori

    , climate change, civil wars, nuclear disasters, and so on. We must examine these issues from an inter, Political Science, International Relations and Educational Development to address these complicated issues/Law and Development, and Politics and Area Studies. The curriculum in each Program is designed to offer opportunities

  19. TECHNOLOGY TRANSFER: PROBLEMS AND PROSPECTS

    E-Print Network [OSTI]

    TECHNOLOGY TRANSFER: PROBLEMS AND PROSPECTS Jesse w. Fussell Department of Defense 9800 Savage Road of technology transfer in this technical area in the past, to forecast prospects for technology transfer in the future, and to suggest some ideas for stimulating the process. 2. TECHNOLOGY TRANSFER PROBLEMS Many

  20. Internal Short Circuits in Lithium-Ion Cells for PHEVs

    SciTech Connect (OSTI)

    Sriramulu, Suresh; Stringfellow, Richard

    2013-05-25

    Development of Plug-in Hybrid Electric Vehicles (PHEVs) has recently become a high national priority because of their potential to enable significantly reduced petroleum consumption by the domestic transportation sector in the relatively near term. Lithium-ion (Li-ion) batteries are a critical enabling technology for PHEVs. Among battery technologies with suitable operating characteristics for use in vehicles, Li-ion batteries offer the best combination of energy, power, life and cost. Consequently, worldwide, leading corporations and government agencies are supporting the development of Li-ion batteries for PHEVs, as well as the full spectrum of vehicular applications ranging from mild hybrid to all-electric. In this project, using a combination of well-defined experiments, custom designed cells and simulations, we have improved the understanding of the process by which a Li-ion cell that develops an internal short progresses to thermal runaway. Using a validated model for thermal runaway, we have explored the influence of environmental factors and cell design on the propensity for thermal runaway in full-sized PHEV cells. We have also gained important perspectives about internal short development and progression; specifically that initial internal shorts may be augmented by secondary shorts related to separator melting. Even though the nature of these shorts is very stochastic, we have shown the critical and insufficiently appreciated role of heat transfer in influencing whether a developing internal short results in a thermal runaway. This work should lead to enhanced perspectives on separator design, the role of active materials and especially cathode materials with respect to safety and the design of automotive cooling systems to enhance battery safety in PHEVs.

  1. Management of Large-Scale International

    E-Print Network [OSTI]

    Management of Large- Scale International Science Projects Dr. Benjamin J. Cross, P.E. Savannah of Government Commerce) #12;Extending Project Management to New, Complex Challenges · Emergence of large-scale-of-the-art R&D and technologies ­ Exceedingly high energies, temperatures, radiological conditions, special

  2. LATERAL GENE TRANSFER AND THE HISTORY OF BACTERIAL GENOMES

    SciTech Connect (OSTI)

    Howard Ochman

    2006-02-22

    The aims of this research were to elucidate the role and extent of lateral transfer in the differentiation of bacterial strains and species, and to assess the impact of gene transfer on the evolution of bacterial genomes. The ultimate goal of the project is to examine the dynamics of a core set of protein-coding genes (i.e., those that are distributed universally among Bacteria) by developing conserved primers that would allow their amplification and sequencing in any bacterial taxa. In addition, we adopted a bioinformatic approach to elucidate the extent of lateral gene transfer in sequenced genome.

  3. Instrument validation project

    SciTech Connect (OSTI)

    Reynolds, B.A.; Daymo, E.A.; Geeting, J.G.H.; Zhang, J.

    1996-06-01

    Westinghouse Hanford Company Project W-211 is responsible for providing the system capabilities to remove radioactive waste from ten double-shell tanks used to store radioactive wastes on the Hanford Site in Richland, Washington. The project is also responsible for measuring tank waste slurry properties prior to injection into pipeline systems, including the Replacement of Cross-Site Transfer System. This report summarizes studies of the appropriateness of the instrumentation specified for use in Project W-211. The instruments were evaluated in a test loop with simulated slurries that covered the range of properties specified in the functional design criteria. The results of the study indicate that the compact nature of the baseline Project W-211 loop does not result in reduced instrumental accuracy resulting from poor flow profile development. Of the baseline instrumentation, the Micromotion densimeter, the Moore Industries thermocouple, the Fischer and Porter magnetic flow meter, and the Red Valve Pressure transducer meet the desired instrumental accuracy. An alternate magnetic flow meter (Yokagawa) gave nearly identical results as the baseline fischer and Porter. The Micromotion flow meter did not meet the desired instrument accuracy but could potentially be calibrated so that it would meet the criteria. The Nametre on-line viscometer did not meet the desired instrumental accuracy and is not recommended as a quantitative instrument although it does provide qualitative information. The recommended minimum set of instrumentation necessary to ensure the slurry meets the Project W-058 acceptance criteria is the Micromotion mass flow meter and delta pressure cells.

  4. Technology transfer issue

    SciTech Connect (OSTI)

    Jacobson, C.

    1982-05-31

    Testimony by Lawrence J. Brady, Commerce Assistant Secretary for Trade Administration, at Congressional hearings on the national security issues of technology transfers to the Soviet Union identified steps the US needs to take to deal effectively with the problem. These steps include an understanding of how the Soviet Union has and will benefit militarily by acquiring Western technology and efforts to work with other countries, counterintelligence agencies, and industries to stem the flow of technological information. Brady outlined changes in technology development that complicate the enforcement of transfer rules, and emphasized the importance of a close relationship between the business community and the Commerce Department. (DCK)

  5. Energy Department Announces Five Research Projects to Improve...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    University, Morgantown, W.V. Partners in this project are: Luscar Ltd., Edmonton, Alberta, Canada; Mineral Technologies International Inc., Morgantown, W.V.; McLanahan...

  6. Projects of the year

    SciTech Connect (OSTI)

    Hansen, T.

    2007-01-15

    The Peabody Hotel, Orlando, Florida was the site of Power Engineering magazine's 2006 Projects of the Year Awards Banquet, which kicked-off the Power-Gen International conference and exhibition. The Best Coal-fired Project was awarded to Tri-State Generation and Transmission Association Inc., owner of Springenville Unit 3. This is a 400 MW pulverized coal plant in Springeville, AZ, sited with two existing coal-fired units. Designed to fire Powder River Basin coal, it has low NOx burners and selective catalytic reduction for NOx control, dry flue gas desulfurization for SO{sub 2} control and a pulse jet baghouse for particulate control. It has a seven-stage feedwater heater and condensers to ensure maximum performance. Progress Energy-Carolinas' Asheville Power Station FGD and SCR Project was awarded the 2006 coal-fired Project Honorable Mention. This plant in Skyland, NC was required to significantly reduce NOx emissions. When completed, the improvements will reduce NOx by 93% compared to 1996 levels and SO{sub 2} by 93% compared to 2001 levels. Awards for best gas-fired, nuclear, and renewable/sustainable energy projects are recorded. The Sasyadko Coal-Mine Methane Cogeneration Plant near Donezk, Ukraine, was given the 2006 Honorable Mention for Best Renewable/Sustainable Energy Project. In November 2004, Ukraine was among 14 nations to launch the Methane to Markets partnership. The award-winning plant is fuelled by methane released during coal extraction. It generates 42 MW of power. 4 photos.

  7. ME 360N Intermediate Heat Transfer ABET EC2000 syllabus

    E-Print Network [OSTI]

    Ben-Yakar, Adela

    and Internal), Heat Exchangers (1) 3. Heat Exchanger Analysis (1) 4. Radiation (Intro) (Properties, Surface (1) 22. Nat'l. Conv. (1) 23. Intro Heat Exchangers & Energy Balances (1) 24. Overall H.T. Coeff ­ Intermediate Heat Transfer Page 2 ABET EC2000 syllabus Class/Laboratory Schedule (Type, number and duration

  8. Recent Heat Transfer Improvements to the RELAP5-3D Code

    SciTech Connect (OSTI)

    Riemke, Richard A; Davis, Cliff B; Oh, Chang

    2007-05-01

    The heat transfer section of the RELAP5-3D computer program has been recently improved. The improvements are as follows: (1) the general cladding rupture model was modified (more than one heat structure segment connected to the hydrodynamic volume and heat structure geometry’s internal gap pressure), (2) the cladding rupture model was modified for reflood, and (3) the heat transfer minor edits/plots were extended to include radiation/enclosure heat flux and generation (internal heat source).

  9. International Journal on Software Tools for Technology Transfer

    E-Print Network [OSTI]

    Stølen, Ketil

    that facilitate analysis of such changes. Most of the established methods and techniques for risk assessment exemplified within the oil and gas domain Atle Refsdal, Bjørnar Solhaug & Ketil Stølen #12;1 23 Your article of system changes exemplified within the oil and gas domain Atle Refsdal · Bjørnar Solhaug · Ketil Stølen

  10. International Center for Environmental Technology Transfer | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History View NewTexas: Energy ResourcesOrder at 8, 13Renewable Power Jump to:

  11. Three Dimensional Radiative Transfer

    E-Print Network [OSTI]

    Tom Abel

    2000-05-09

    Radiative Transfer (RT) effects play a crucial role in the thermal history of the intergalactic medium. Here I discuss recent advances in the development of numerical methods that introduce RT to cosmological hydrodynamics. These methods can also readily be applied to time dependent problems on interstellar and galactic scales.

  12. Editorial: The Human Genome Project

    E-Print Network [OSTI]

    Crawford, Michael H.; Baer, A.S.; Hall, R.; Omenn, G.S.; Thomson, G.J.; Wilson, A.C.

    1990-08-01

    iv / Editorial: The Human Genome Project Dear readers, The last few decades have seen a number of exciting developments in genetics. First, Watson and Crick broke the genetic code; since then, tech-nologic and methodologic breakthroughs have... permitted the study and direct manipulation of our DNA. Now there is an international ground swell to map and sequence the human genome. The Bush administration had originally requested $128 million in last year's budget for the Human Genome Project. However...

  13. International Collaboration on Offshore Wind Energy Under IEA Annex XXIII

    SciTech Connect (OSTI)

    Musial, W.; Butterfield, S.; Lemming, J.

    2005-11-01

    This paper defines the purpose of IEA Annex XXIII, the International Collaboration on Offshore Wind Energy. This international collaboration through the International Energy Agency (IEA) is an efficient forum from which to advance the technical and environmental experiences collected from existing offshore wind energy projects, as well as the research necessary to advance future technology for deep-water wind energy technology.

  14. Designing sanitation projects in rural Ghana

    E-Print Network [OSTI]

    Lau, Jonathan (Jonathan Ho Yin)

    2011-01-01

    Providing sanitation to rural areas in Ghana remains a huge challenge. Government funding is scarce while many international donor projects are ineffective. This thesis explores the difficulties with rural sanitation ...

  15. Why Energy Projects Do Not Get Approved 

    E-Print Network [OSTI]

    Gilbert, J. S.

    1986-01-01

    We have all struggled to convince management to pursue energy conservation alternatives using economic arguments such as internal rates of return, project payback, and net present value. Some have tried life cycle ...

  16. International energy outlook 1999

    SciTech Connect (OSTI)

    1999-03-01

    This report presents international energy projections through 2020, prepared by the Energy Information Administration. The outlooks for major energy fuels are discussed, along with electricity, transportation, and environmental issues. The report begins with a review of world trends in energy demand. The historical time frame begins with data from 1970 and extends to 1996, providing readers with a 26-year historical view of energy demand. The IEO99 projections covers a 24-year period. The next part of the report is organized by energy source. Regional consumption projections for oil, natural gas, coal, nuclear power, and renewable energy (hydroelectricity, geothermal, wind, solar, and other renewables) are presented in the five fuel chapters, along with a review of the current status of each fuel on a worldwide basis. The third part of the report looks at energy consumption in the end-use sectors, beginning with a chapter on energy use for electricity generation. New to this year`s outlook are chapters on energy use in the transportation sector and on environmental issues related to energy consumption. 104 figs., 87 tabs.

  17. INTERNATIONAL AGREEMENTS

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergy A plug-inPPLforLDRD Report11,SecurityHome . Form D-4-AILE:Falls - TheINTERNATIONAL

  18. Internal Resources

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverseIMPACT EVALUATION PLANIsProcess RelevantInternal AuditDrawings/Photos | Links

  19. International Fellows

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverseIMPACT EVALUATION PLANIsProcessRegulation InternationalAlexander and Lienert

  20. International H

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverseIMPACT EVALUATION PLANIsProcessRegulation InternationalAlexander and2

  1. International Sunport

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverseIMPACT EVALUATION PLANIsProcessRegulation International NuclearChallenges

  2. International Conference

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformation CurrentHenryInhibitingInteractive Jobs Interactive JobsInterlibraryInternalA

  3. 22.033 / 22.33 Nuclear Systems Design Project, Fall 2002

    E-Print Network [OSTI]

    Kadak, Andrew

    Group design project involving integration of nuclear physics, particle transport, control, heat transfer, safety, instrumentation, materials, environmental impact, and economic optimization. Provides students with opportunity ...

  4. Office of International Education International Student & Scholar Immigration Services

    E-Print Network [OSTI]

    Arnold, Jonathan

    Office of International Education International Student & Scholar Immigration Services Policies-2015 International Student, Scholar and Immigration Services (ISSIS) within the Office of International Education of International Education when immigration services related to international scholars, interns, faculty

  5. MHD Technology Transfer, Integration and Review Committee

    SciTech Connect (OSTI)

    Not Available

    1989-10-01

    As part of the MHD Integrated Topping Cycle (ITC) project, TRW was given the responsibility to organize, charter and co-chair, with the Department of Energy (DOE), an MHD Technology Transfer, Integration and Review Committee (TTIRC). The Charter of the TTIRC, which was approved by the DOE in June 1988 and distributed to the committee members, is included as part of this Summary. As stated in the Charter, the purpose of this committee is to: (1) review all Proof-of-Concept (POC) projects and schedules in the national MHD program; to assess their compatibility with each other and the first commercial MHD retrofit plant; (2) establish and implement technology transfer formats for users of this technology; (3) identify interfaces, issues, and funding structures directly impacting the success of the commercial retrofit; (4) investigate and identify the manner in which, and by whom, the above should be resolved; and (5) investigate and assess other participation (foreign and domestic) in the US MHD Program. The DOE fiscal year 1989 MHD Program Plan Schedule is included at the end of this Summary. The MHD Technology Transfer, Integration and Review Committee's activities to date have focused primarily on the technology transfer'' aspects of its charter. It has provided a forum for the dissemination of technical and programmatic information among workers in the field of MHD and to the potential end users, the utilities, by holding semi-annual meetings. The committee publishes this semi-annual report, which presents in Sections 2 through 11 capsule summaries of technical progress for all DOE Proof-of-Concept MHD contracts and major test facilities.

  6. Faculty Positions Heat Transfer and

    E-Print Network [OSTI]

    Faculty Positions Heat Transfer and Thermal/Energy Sciences Naval Postgraduate School Monterey-track faculty position at the assistant professor level in the areas of Heat Transfer and Thermal/Fluid Sciences

  7. Swipe transfer assembly

    DOE Patents [OSTI]

    Christiansen, Robert M. (Blackfoot, ID); Mills, William C. (McKeesport, PA)

    1992-01-01

    The swipe transfer assembly is a mechanical assembly which is used in conjunction with glove boxes and other sealed containments. It is used to pass small samples into or out of glove boxes without an open breach of the containment, and includes a rotational cylinder inside a fixed cylinder, the inside cylinder being rotatable through an arc of approximately 240.degree. relative to the outer cylinder. An offset of 120.degree. from end to end allows only one port to be opened at a time. The assembly is made of stainless steel or aluminum and clear acrylic plastic to enable visual observation. The assembly allows transfer of swipes and smears from radiological and other specially controlled environments.

  8. QER- Comment of Energy Transfer

    Broader source: Energy.gov [DOE]

    From: Lee Hanse Executive Vice President Interstate Energy Transfer Mobile - 210 464 2929 Office - 210 403 6455

  9. project management

    National Nuclear Security Administration (NNSA)

    3%2A en Project Management and Systems Support http:www.nnsa.energy.govaboutusouroperationsapmprojectmanagementandsystemssupport

  10. Project Complete

    Broader source: Energy.gov [DOE]

    DOE has published its Record of Decision announcing and explaining DOE’s chosen project alternative and describing any commitments for mitigating potential environmental impacts. The NEPA process...

  11. Project Construction

    Broader source: Energy.gov [DOE]

    Integrating renewable energy into Federal new construction or major renovations requires effective structuring of the construction team and project schedule. This overview discusses key construction team considerations for renewable energy as well as timing and expectations for the construction phase. The project construction phase begins after a project is completely designed and the construction documents (100%) have been issued. Construction team skills and experience with renewable energy technologies are crucial during construction, as is how the integration of renewable energy affects the project construction schedule.

  12. Research Projects

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    projects that involve UCSD faculty members and graduate students from the structural engineering (SE), mechanical and aerospace engineering (MAE), electrical and computer...

  13. HIGEE Mass Transfer 

    E-Print Network [OSTI]

    Mohr, R. J.; Fowler, R.

    1986-01-01

    compared with other more conventional mass transfer equipment, will show up to advantage at reasonably large capacity but compare poorly for low capacity duties. (3) Capacity and separation capability (i.e. number of stages) in a HIGEE... are not independent variables, because diameter features in both. If the casing dimensions, OD and axial length, are arbitrarily fixed; then for a duty requiring a large number of stages the packing thickness will be greater and the ID correspondingly smaller...

  14. Plastic container bagless transfer

    DOE Patents [OSTI]

    Tibrea, Steven L.; D'Amelio, Joseph A.; Daugherty, Brent A.

    2003-11-18

    A process and apparatus are provided for transferring material from an isolated environment into a storage carrier through a conduit that can be sealed with a plug. The plug and conduit can then be severed to provide a hermetically sealed storage carrier containing the material which may be transported for storage or disposal and to maintain a seal between the isolated environment and the ambient environment.

  15. International ESCO business opportunities and challenges: a Japanese case study

    SciTech Connect (OSTI)

    Vine, E.; Murakoshi, C.

    1997-10-01

    Recently, US energy service companies (ESCOs) have begun to actively explore markets outside the US. Despite the needs of many countries for ESCO involvement, ESCOs face many challenges (i.e., marketing, financial, institutional, political and cultural barriers). Consequently, most of these firms pursue international project opportunities very selectively due to the costs and risks associated with project development. Despite these barriers, some ESCOs view international work as a strategic expansion of their business, assuming that there will be adequate business in the future to repay them for their initial investment. In this paper, the authors present the findings from a recently completed study on the proposed development of an ESCO industry in Japan. The study was based on four sources of information: (1) a review of the published and unpublished literature on ESCOs; (2) interviews with 26 ESCOs in the US, the US Department of Energy, and the National Association of Energy Service Companies (NAESCO); (3) ESCO presentations at the October 1996 NAESCO meeting; and (4) informal discussions with ESCO experts in the US. They believe that the lessons learned in this study can be transferred or applied to other countries interested in developing an ESCO industry. While energy prices have remained relatively stable over the last several years in Japan and energy capacity is not perceived as a near-term problem, other ``market drivers`` necessary for the emergence of a successful and vibrant ESCO industry exist in Japan. Despite the presence of these market drivers, significant barriers to the successful development of an ESCO industry exist in Japan.

  16. Technology Transfer, Entrepreneurship and Innovation

    E-Print Network [OSTI]

    Reed, Nancy E.

    Technology Transfer, Entrepreneurship and Innovation The College of Engineering at UH Ma¯noa has a strong tradition of technology transfer and entrepreneurship that supports the University of Hawai`i's innovation and technology transfer initiative. Principal units are mechanical engineering, electrical

  17. 5. Heat transfer Ron Zevenhoven

    E-Print Network [OSTI]

    Zevenhoven, Ron

    Three heat transfer mechanisms Conduction Convection Radiation 2/120 Pic: BÖ88 Åbo Akademi University1/120 5. Heat transfer Ron Zevenhoven Åbo Akademi University Thermal and Flow Engineering / Värme | Thermal and Flow Engineering | 20500 Turku | Finland #12;3/120 5.1 Conductive heat transfer Åbo Akademi

  18. Technology Transfer Ombudsman Program | Department of Energy

    Office of Environmental Management (EM)

    Technology Transfer Ombudsman Program Technology Transfer Ombudsman Program The Technology Transfer Commercialization Act of 2000, Public Law 106-404 (PDF) was enacted in November...

  19. Clean Cast Steel Technology - Machinability and Technology Transfer

    SciTech Connect (OSTI)

    C. E. Bates; J. A. Griffin

    2000-05-01

    There were two main tasks in the Clean Cast Steel Technology - Machinability and Technology Transfer Project. These were (1) determine the processing facts that control the machinability of cast steel and (2) determine the ability of ladle stirring to homogenize ladle temperature, reduce the tap and pouring temperatures, and reduce casting scrap.

  20. Advanced Heat Transfer Fluids and Novel Thermal Storage Concepts for CSP Generation

    Broader source: Energy.gov [DOE]

    In 2008, DOE issued the Advanced Heat Transfer Fluids and Novel Thermal Storage Concepts for Concentrating Solar Power (CSP) Generation funding opportunity announcement (FOA) managed by the SunShot Initiative. The following projects were selected under this competitive solicitation.

  1. Press and Dryer Roll Surgaces and Web Transfer Systems for Ultra High Paper Maching Speeds

    SciTech Connect (OSTI)

    T. F. Patterson

    2004-03-15

    The objective of the project was to provide fundamental knowledge and diagnostic tools needed to design new technologies that will allow ultra high speed web transfer from press rolls and dryer cylinders.

  2. 14th International Heat Pipe Conference (14th IHPC), Florianpolis, Brazil, April 22-27, 2007. TWO-PHASE CLOSED THERMOSYPHON WITH NANOFLUIDS

    E-Print Network [OSTI]

    Khandekar, Sameer

    14th International Heat Pipe Conference (14th IHPC), Florianópolis, Brazil, April 22-27, 2007. TWO heat transfer fluids due to their better thermal conductivity, increase in single phase heat transfer coefficient and significant increase

  3. Building America Case Study: Air Leakage and Air Transfer Between Garage and Living Space, Waldorf, Maryland (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2014-11-01

    This research project focused on evaluation of air transfer between the garage and living space in a single-family detached home constructed by a production homebuilder in compliance with the 2009 International Residential Code and the 2009 International Energy Conservation Code. The project gathered important information about the performance of whole-building ventilation systems and garage ventilation systems as they relate to minimizing flow of contaminated air from garage to living space. A series of 25 multi-point fan pressurization tests and additional zone pressure diagnostic testing characterized the garage and house air leakage, the garage-to-house air leakage, and garage and house pressure relationships to each other and to outdoors using automated fan pressurization and pressure monitoring techniques. While the relative characteristics of this house may not represent the entire population of new construction configurations and air tightness levels (house and garage) throughout the country, the technical approach was conservative and should reasonably extend the usefulness of the results to a large spectrum of house configurations from this set of parametric tests in this one house. Based on the results of this testing, the two-step garage-to-house air leakage test protocol described above is recommended where whole-house exhaust ventilation is employed. For houses employing whole-house supply ventilation (positive pressure) or balanced ventilation (same pressure effect as the Baseline condition), adherence to the EPA Indoor airPLUS house-to-garage air sealing requirements should be sufficient to expect little to no garage-to-house air transfer.

  4. Author's personal copy International Journal of Hydrogen Energy 32 (2007) 47724785

    E-Print Network [OSTI]

    Pilon, Laurent

    2007-01-01

    Author's personal copy International Journal of Hydrogen Energy 32 (2007) 4772­4785 www radiation from light transfer point of view. 2007 International Association for Hydrogen Energy. Published). 0360-3199/$ - see front matter 2007 International Association for Hydrogen Energy. Published

  5. International District Energy Association

    Broader source: Energy.gov [DOE]

    Since its formation in 1909, the International District Energy Association (IDEA) has served as a principal industry advocate and management resource for owners, operators, developers, and suppliers of district heating and cooling systems in cities, campuses, bases, and healthcare facilities. Today, with over 1,400 members in 26 countries, IDEA continues to organize high-quality technical conferences that inform, connect, and advance the industry toward higher energy efficiency and lower carbon emissions through innovation and investment in scalable sustainable solutions. With the support of DOE, IDEA performs industry research and market analysis to foster high impact projects and help transform the U.S. energy industry. IDEA was an active participant in the original Vision and Roadmap process and has continued to partner with DOE on combined heat and power (CHP) efforts across the country.

  6. Progress Towards International Repositories

    SciTech Connect (OSTI)

    McCombie, C.; Chapman, N.

    2002-02-27

    The nuclear fuel cycle is designed to be very international, with some specialist activities (e.g. fuel fabrication, reprocessing, etc.) being confined to a few countries. Nevertheless, political and public opposition has in the past been faced by proposals to internationalise the back-end of the cycle, in particular waste disposal. Attitudes, however, have been changing recently and there is now more acceptance of the general concept of shared repositories and of specific proposals such as that of Pangea. However, as for national facilities, progress towards implementation of shared repositories will be gradual. Moreover, the best vehicle for promoting the concept may not be a commercial type of organization. Consequently the Pangea project team are currently establishing a widely based Association for this purpose.

  7. Project Profile: Heat Transfer and Latent Heat Storage in Inorganic...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    energy storage capacity of a thermocline. The PCM-based TES uses the latent heat of fusion of inorganic salt mixtures for storing thermal energy. The concepts being applied by...

  8. Analysis of Technology Transfer in CDM Projects | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION JEnvironmental Jump to:EAandAmminex A S Jump to: navigation,Inof Ground Source Heat Pump

  9. CROSS VALIDATION OF SATELLITE RADIATION TRANSFER MODELS DURING SWERA PROJECT

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION JEnvironmentalBowerbank, Maine:Kansas: Energy Resources JumpCIA-The WorldISES- 2003 CROSS

  10. Wireless Power Transfer

    ScienceCinema (OSTI)

    None

    2013-11-19

    Wireless Power Transfer is an innovative approach using magnetic resonance coupling of air core transformers designed for today's growing plug-in electric vehicle market. This technology can provide a convenient, safe and flexible means to charge electric vehicles under stationary and dynamic conditions. Plug-in Electric Vehicles (PEV) are burdened by the need for cable and plug charger, galvanic isolation of the on-board electronics, bulk and cost of this charger and the large energy storage system (ESS) packs needed. With a system where you have to physically plug in there are a number of occasions where the owner could very well forget to charge the vehicle. For stationary applications (like charging of a PHEV at home), ORNL's innovative wireless power transfer technology adds a convenience factor compared to actually plugging in which will mean that the vehicle will have a full charge every morning. Electric vehicle charging must be safe, compact and efficient in order to be convenient for customers. By reconfiguring the transformer and altering the resonance frequency, energy is transferred to the battery with lower energy losses and with fewer demands on the primary circuit by the rest of the transformer system. The ORNL discovery shows that sufficient power for the battery can be transferred from the primary to secondary circuits without significant energy losses if the operating frequency is set at 50% to 95% of the resonance frequency of the circuit. The electrical power is then transmitted to the chargeable battery, which is electrically coupled to the secondary circuit through the air core transformer. Some advantages include: Reduced energy losses during transfer of energy to the battery; A charge potential that is relatively unaffected by up to 25% misalignment of vehicle; and Other receiving components draw less power from the primary circuit. These advantages allow wireless power technology applications to expand at the workplace and beyond as the demand for EV rises. For vehicles that operate over a fixed route such as busses and shuttle vehicles, Wireless Power Transfer (WPT) means that a smaller battery pack can be used. In the traditional system, the battery pack is designed to accommodate the needs of the entire route or shift. With WPT the battery can be downsized because it can be charged when the vehicle stops on its route (a rental car shuttle bus, for example, can charge when it waits in the terminal and again when it waits at the rental car place. Thus the battery only needs enough charge to get to the next stop. This decrease in battery size means significant cost savings to electrify the vehicle. This technology enables efficient "opportunity charging stations" for predefined routes and planned stops reducing down time. Charging can occur in minutes. This improvement also eliminates the harmful emissions that occur in garages while buses are at idle during charging. In larger cities, dynamic charging offers an even greater impact utilizing existing infrastructure. As vehicles travel along busy freeways and interstate systems, wireless charging can occur while the vehicle is in motion. With this technology a vehicle essentially has unlimited electric range while using a relatively small battery pack. In-motion charging stations use vehicle sensors to alert the driver. Traveling at normal speeds, sensors establish in-motion charging. WPT transmit pads sequentially energize to the negotiated power level based on vehicle speed and its requested charging energy. Lower power when vehicle speed is slow and much higher power for faster moving vehicles. Vehicle to Infrastructure communications (V2I) coordinates WPT charging level according to on-board battery pack state-of-charge. V2I activates the roadway transmit pads placing them in standby mode and negotiates charging fee based on prevailing grid rate and vehicle energy demand. Dynamic charging would allow electricity to supply a very large fraction of the energy for the transportation sector and reduce greatly petroleum consump

  11. Wireless Power Transfer

    SciTech Connect (OSTI)

    2013-07-22

    Wireless Power Transfer is an innovative approach using magnetic resonance coupling of air core transformers designed for today's growing plug-in electric vehicle market. This technology can provide a convenient, safe and flexible means to charge electric vehicles under stationary and dynamic conditions. Plug-in Electric Vehicles (PEV) are burdened by the need for cable and plug charger, galvanic isolation of the on-board electronics, bulk and cost of this charger and the large energy storage system (ESS) packs needed. With a system where you have to physically plug in there are a number of occasions where the owner could very well forget to charge the vehicle. For stationary applications (like charging of a PHEV at home), ORNL's innovative wireless power transfer technology adds a convenience factor compared to actually plugging in which will mean that the vehicle will have a full charge every morning. Electric vehicle charging must be safe, compact and efficient in order to be convenient for customers. By reconfiguring the transformer and altering the resonance frequency, energy is transferred to the battery with lower energy losses and with fewer demands on the primary circuit by the rest of the transformer system. The ORNL discovery shows that sufficient power for the battery can be transferred from the primary to secondary circuits without significant energy losses if the operating frequency is set at 50% to 95% of the resonance frequency of the circuit. The electrical power is then transmitted to the chargeable battery, which is electrically coupled to the secondary circuit through the air core transformer. Some advantages include: Reduced energy losses during transfer of energy to the battery; A charge potential that is relatively unaffected by up to 25% misalignment of vehicle; and Other receiving components draw less power from the primary circuit. These advantages allow wireless power technology applications to expand at the workplace and beyond as the demand for EV rises. For vehicles that operate over a fixed route such as busses and shuttle vehicles, Wireless Power Transfer (WPT) means that a smaller battery pack can be used. In the traditional system, the battery pack is designed to accommodate the needs of the entire route or shift. With WPT the battery can be downsized because it can be charged when the vehicle stops on its route (a rental car shuttle bus, for example, can charge when it waits in the terminal and again when it waits at the rental car place. Thus the battery only needs enough charge to get to the next stop. This decrease in battery size means significant cost savings to electrify the vehicle. This technology enables efficient "opportunity charging stations" for predefined routes and planned stops reducing down time. Charging can occur in minutes. This improvement also eliminates the harmful emissions that occur in garages while buses are at idle during charging. In larger cities, dynamic charging offers an even greater impact utilizing existing infrastructure. As vehicles travel along busy freeways and interstate systems, wireless charging can occur while the vehicle is in motion. With this technology a vehicle essentially has unlimited electric range while using a relatively small battery pack. In-motion charging stations use vehicle sensors to alert the driver. Traveling at normal speeds, sensors establish in-motion charging. WPT transmit pads sequentially energize to the negotiated power level based on vehicle speed and its requested charging energy. Lower power when vehicle speed is slow and much higher power for faster moving vehicles. Vehicle to Infrastructure communications (V2I) coordinates WPT charging level according to on-board battery pack state-of-charge. V2I activates the roadway transmit pads placing them in standby mode and negotiates charging fee based on prevailing grid rate and vehicle energy demand. Dynamic charging would allow electricity to supply a very large fraction of the energy for the transportation sector and reduce greatly petroleum consump

  12. International magnetic pulse compression workshop: (Proceedings)

    SciTech Connect (OSTI)

    Kirbie, H.C.; Newton, M.A.; Siemens, P.D.

    1991-04-01

    A few individuals have tried to broaden the understanding of specific and salient pulsed-power topics. One such attempt is this documentation of a workshop on magnetic switching as it applies primarily to pulse compression (power transformation), affording a truly international perspective by its participants under the initiative and leadership of Hugh Kirbie and Mark Newton of the Lawrence Livermore National Laboratory (LLNL) and supported by other interested organizations. During the course of the Workshop at Granlibakken, a great deal of information was amassed and a keen insight into both the problems and opportunities as to the use of this switching approach was developed. The segmented workshop format proved ideal for identifying key aspects affecting optimum performance in a variety of applications. Individual groups of experts addressed network and system modeling, magnetic materials, power conditioning, core cooling and dielectrics, and finally circuits and application. At the end, they came together to consolidate their input and formulate the workshop's conclusions, identifying roadblocks or suggesting research projects, particularly as they apply to magnetic switching's trump card--its high-average-power-handling capability (at least on a burst-mode basis). The workshop was especially productive both in the quality and quantity of information transfer in an environment conducive to a free and open exchange of ideas. We will not delve into the organization proper of this meeting, rather we wish to commend to the interested reader this volume, which provides the definitive and most up-to-date compilation on the subject of magnetic pulse compression from underlying principles to current state of the art as well as the prognosis for the future of magnetic pulse compression as a consensus of the workshop's organizers and participants.

  13. The International Linear Collider

    E-Print Network [OSTI]

    Barish, Barry

    2013-01-01

    In this article, we describe the key features of the recently completed technical design for the International Linear Collider (ILC), a 200-500 GeV linear electron-positron collider (expandable to 1 TeV) that is based on 1.3 GHz superconducting radio-frequency (SCRF) technology. The machine parameters and detector characteristics have been chosen to complement the Large Hadron Collider physics, including the discovery of the Higgs boson, and to further exploit this new particle physics energy frontier with a precision instrument. The linear collider design is the result of nearly twenty years of R&D, resulting in a mature conceptual design for the ILC project that reflects an international consensus. We summarize the physics goals and capability of the ILC, the enabling R&D and resulting accelerator design, as well as the concepts for two complementary detectors. The ILC is technically ready to be proposed and built as a next generation lepton collider, perhaps to be built in stages beginning as a Hig...

  14. NREL: Technology Transfer - Ombuds

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration wouldMass map shines lightGeospatial ToolkitSMARTS -BeingFuture for SolarTechnology Transfer

  15. Ceramic Technology Project

    SciTech Connect (OSTI)

    Not Available

    1992-03-01

    The Ceramic Technology Project was developed by the USDOE Office of Transportation Systems (OTS) in Conservation and Renewable Energy. This project, part of the OTS's Materials Development Program, was developed to meet the ceramic technology requirements of the OTS's automotive technology programs. Significant accomplishments in fabricating ceramic components for the USDOE and NASA advanced heat engine programs have provided evidence that the operation of ceramic parts in high-temperature engine environments is feasible. These programs have also demonstrated that additional research is needed in materials and processing development, design methodology, and data base and life prediction before industry will have a sufficient technology base from which to produce reliable cost-effective ceramic engine components commercially. A five-year project plan was developed with extensive input from private industry. In July 1990 the original plan was updated through the estimated completion of development in 1993. The objective is to develop the industrial technology base required for reliable ceramics for application in advanced automotive heat engines. The project approach includes determining the mechanisms controlling reliability, improving processes for fabricating existing ceramics, developing new materials with increased reliability, and testing these materials in simulated engine environments to confirm reliability. Although this is a generic materials project, the focus is on the structural ceramics for advanced gas turbine and diesel engines, ceramic bearings and attachments, and ceramic coatings for thermal barrier and wear applications in these engines. To facilitate the rapid transfer of this technology to US industry, the major portion of the work is being done in the ceramic industry, with technological support from government laboratories, other industrial laboratories, and universities.

  16. Summary - Preliminary TRA of the Calcine Disposition Project

    Office of Environmental Management (EM)

    TR -1 (now sched matic Transfer ixing System (T e Formulation RA reports, please v govPagesExternal nology Readiness A ng a systematic, me l LabINL sition Project 1 nt of...

  17. KTP BENEFITS Knowledge Transfer

    E-Print Network [OSTI]

    Berzins, M.

    of the new oil and to see if the amount discarded as waste could be reduced. BENEFITS The KTP project has from reduced oil waste Better production, storage and management practices Professional development healthy unsaturated oil blend for frying. The Company recognised the benefits of looking at the use

  18. Technology Transfer at DOE

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Financing ToolInternational Affairs, BeforeActivities TechnicalOffice

  19. Using Thermally-Degrading, Partitioning, and Nonreactive Tracers to Determine Temperature Distribution and Fracture/Heat Transfer Surface Area in Geothermal Reservoirs

    Broader source: Energy.gov [DOE]

    DOE Geothermal Peer Review 2010 - Project Summary. The goal of this project is to provide integrated tracer and tracer interpretation tools to facilitate quantitative characterization of temperature distributions and surface area available for heat transfer in EGS.

  20. LESSONS LEARNED Biosurveillance Mobile App Development Intern Competition (Summer 2013)

    SciTech Connect (OSTI)

    Noonan, Christine F.; Henry, Michael J.; Corley, Courtney D.

    2014-01-14

    The purpose of the lessons learned document for the BEOWulf Biosurveillance Mobile App Development Intern Competition is to capture the project’s lessons learned in a formal document for use by other project managers on similar future projects. This document may be used as part of new project planning for similar projects in order to determine what problems occurred and how those problems were handled and may be avoided in the future. Additionally, this document details what went well with the project and why, so that other project managers may capitalize on these actions. Project managers may also use this document to determine who the project team members were in order to solicit feedback for planning their projects in the future. This document will be formally communicated with the organization and will become a part of the organizational assets and archives.

  1. A Roadmap for NEAMS Capability Transfer

    SciTech Connect (OSTI)

    Bernholdt, David E [ORNL

    2011-11-01

    The vision of the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program is to bring truly predictive modeling and simulation (M&S) capabilities to the nuclear engineering community in order to enable a new approach to the design and analysis of nuclear energy systems. From its inception, the NEAMS program has always envisioned a broad user base for its software and scientific products, including researchers within the DOE complex, nuclear industry technology developers and vendors, and operators. However activities to date have focused almost exclusively on interactions with NEAMS sponsors, who are also near-term users of NEAMS technologies. The task of the NEAMS Capability Transfer (CT) program element for FY2011 is to develop a comprehensive plan to support the program's needs for user outreach and technology transfer. In order to obtain community input to this plan, a 'NEAMS Capability Transfer Roadmapping Workshop' was held 4-5 April 2011 in Chattanooga, TN, and is summarized in this report. The 30 workshop participants represented the NEAMS program, the DOE and industrial user communities, and several outside programs. The workshop included a series of presentations providing an overview of the NEAMS program and presentations on the user outreach and technology transfer experiences of (1) The Advanced Simulation and Computing (ASC) program, (2) The Standardized Computer Analysis for Licensing Evaluation (SCALE) project, and (3) The Consortium for Advanced Simulation of Light Water Reactors (CASL), followed by discussion sessions. Based on the workshop and other discussions throughout the year, we make a number of recommendations of key areas for the NEAMS program to develop the user outreach and technology transfer activities: (1) Engage not only DOE, but also industrial users sooner and more often; (2) Engage with the Nuclear Regulatory Commission to facilitate their understanding and acceptance of NEAMS approach to predictive M&S; (3) Place requirements gathering from prospective users on a more formal footing, updating requirements on a regular basis and incorporate them into planning and execution of the project in a traceable fashion; (4) Seek out the best available data for validation purposes, and work with experimental programs to design and carry out new experiments that satisfy the need for data suitable for validation of high-fidelity M&S codes; (5) Develop and implement program-wide plans and policies for export control, licensing, and distribution of NEAMS software products; (6) Establish a program of sponsored alpha testing by experienced users in order to obtain feedback on NEAMS codes; (7) Provide technical support for NEAMS software products; (8) Develop and deliver documentation, tutorial materials, and live training classes; and (9) Be prepared to support outside users who wish to contribute to the codes.

  2. International Programs and Services International Programs

    E-Print Network [OSTI]

    . The office is organized into three functional units-- International Education, Education Abroad in Agriculture, Natural Resources, English, and Food Science and Human Nutrition are administered through) Courses International Education (IE subject code) courses, such as World Interdependence: World Food

  3. TIMSS is a well-established assessment that has been providing internationally

    E-Print Network [OSTI]

    Huang, Jianyu

    in mathematics. TIMSS and TIMSS Numeracy are projects of IEA (International Association for the Evaluation of Educational Achievement). Headquartered in Amsterdam, IEA has been conducting international comparative studies of student educational achievement since 1959. IEA pioneered studies relating cross

  4. Risk transfer via energy savings insurance

    SciTech Connect (OSTI)

    Mills, Evan

    2001-10-01

    Among the key barriers to investment in energy efficiency improvements are uncertainties about attaining projected energy savings and apprehension about potential disputes over these savings. The fields of energy management and risk management are thus intertwined. While many technical methods have emerged to manage performance risks (e.g. building commissioning), financial risk transfer techniques are less developed in the energy management arena than in other more mature segments of the economy. Energy Savings Insurance (ESI) - formal insurance of predicted energy savings - is one method of transferring financial risks away from the facility owner or energy services contractor. ESI offers a number of significant advantages over other forms of financial risk transfer, e.g. savings guarantees or performance bonds. ESI providers manage risk via pre-construction design review as well as post-construction commissioning and measurement and verification of savings. We found that the two mos t common criticisms of ESI - excessive pricing and onerous exclusions - are not born out in practice. In fact, if properly applied, ESI can potentially reduce the net cost of energy savings projects by reducing the interest rates charged by lenders, and by increasing the level of savings through quality control. Debt service can also be ensured by matching loan payments to projected energy savings while designing the insurance mechanism so that payments are made by the insurer in the event of a savings shortfall. We estimate the U.S. ESI market potential of $875 million/year in premium income. From an energy-policy perspective, ESI offers a number of potential benefits: ESI transfers performance risk from the balance sheet of the entity implementing the energy savings project, thereby freeing up capital otherwise needed to ''self-insure'' the savings. ESI reduces barriers to market entry of smaller energy services firms who do not have sufficiently strong balance sheets to self-insure th e savings. ESI encourages those implementing energy saving projects to go beyond standard, tried-and-true measures and thereby achieve more significant levels of energy savings; and ESI providers stand to be proponents of improved savings measurement and verification techniques, as well as maintenance, thereby contributing to national energy savings objectives and perhaps elevating the quality of information available for program evaluation. Governmental agencies have been pioneers in the use of ESI and could continue to play a role in developing this innovative risk-transfer mechanism. There is particular potential for linkages between ESI and the ENERGY STAR (registered trademark) Buildings Program. It is likely that ENERGY STAR (registered trademark)-labeled commercial buildings (which have lower performance risk thanks to commissioning) would be attractive to providers of energy savings insurance. Conversely, the award of energy savings insurance to an ENERGY STAR (registered trade mark)-labeled building would raise the perceived credibility of the Label and energy savings attributed to the Program.

  5. Office of International Education International Student, Scholar, and Immigration Services

    E-Print Network [OSTI]

    Arnold, Jonathan

    Office of International Education International Student, Scholar, and Immigration Services 1324 of International Education after checking in. For the purpose of the Office of International Education, insurance

  6. From Robotic Toil to Symbolic Theft: Grounding Transfer from EntryLevel to HigherLevel Categories

    E-Print Network [OSTI]

    Harnad, Stevan

    1 From Robotic Toil to Symbolic Theft: Grounding Transfer from Entry­Level to Higher Keywords: symbol grounding, categorical perception, neural networks, robotics, pattern recognition Note International Conference on Artificial Neural Networks, Skovde, September 1998. #12; 2 From Robotic Toil

  7. Turbulent heat transfer in a trapezoidal channel with transverse and v-shaped ribs on two opposite walls 

    E-Print Network [OSTI]

    Subramanian, Karthik

    2006-04-12

    This study investigates the turbulent heat transfer and friction in a trapezoidal channel with opposite walls roughened with transverse and v-shaped ribs. The roughened channel depicts the internal cooling passage of an aerofoil near the trailing...

  8. Cross-border transfer of climate change mitigation technologies : the case of wind energy from Denmark and Germany to India

    E-Print Network [OSTI]

    Mizuno, Emi, Ph. D. Massachusetts Institute of Technology

    2007-01-01

    This research investigated the causal factors and processes of international development and diffusion of wind energy technology by examining private sector cross-border technology transfer from Denmark and Germany to India ...

  9. Technology transfer 1995

    SciTech Connect (OSTI)

    Not Available

    1995-01-01

    Technology Transfer 1995 is intended to inform the US industrial and academic sectors about the many opportunities they have to form partnerships with the US Department of Energy (DOE) for the mutual advantage of the individual institutions, DOE, and the nation as a whole. It also describes some of the growing number of remarkable achievements resulting from such partnerships. These partnership success stories offer ample evidence that Americans are learning how to work together to secure major benefits for the nation--by combining the technological, scientific, and human resources resident in national laboratories with those in industry and academia. The benefits include more and better jobs for Americans, improved productivity and global competitiveness for technology-based industries, and a more efficient government laboratory system.

  10. General Relativistic Radiative Transfer

    E-Print Network [OSTI]

    S. Knop; P. H. Hauschildt; E. Baron

    2006-11-30

    We present a general method to calculate radiative transfer including scattering in the continuum as well as in lines in spherically symmetric systems that are influenced by the effects of general relativity (GR). We utilize a comoving wavelength ansatz that allows to resolve spectral lines throughout the atmosphere. The used numerical solution is an operator splitting (OS) technique that uses a characteristic formal solution. The bending of photon paths and the wavelength shifts due to the effects of GR are fully taken into account, as is the treatment of image generation in a curved spacetime. We describe the algorithm we use and demonstrate the effects of GR on the radiative transport of a two level atom line in a neutron star like atmosphere for various combinations of continuous and line scattering coefficients. In addition, we present grey continuum models and discuss the effects of different scattering albedos on the emergent spectra and the determination of effective temperatures and radii of neutron star atmospheres.

  11. Heat transfer probe

    DOE Patents [OSTI]

    Frank, Jeffrey I.; Rosengart, Axel J.; Kasza, Ken; Yu, Wenhua; Chien, Tai-Hsin; Franklin, Jeff

    2006-10-10

    Apparatuses, systems, methods, and computer code for, among other things, monitoring the health of samples such as the brain while providing local cooling or heating. A representative device is a heat transfer probe, which includes an inner channel, a tip, a concentric outer channel, a first temperature sensor, and a second temperature sensor. The inner channel is configured to transport working fluid from an inner inlet to an inner outlet. The tip is configured to receive at least a portion of the working fluid from the inner outlet. The concentric outer channel is configured to transport the working fluid from the inner outlet to an outer outlet. The first temperature sensor is coupled to the tip, and the second temperature sensor spaced apart from the first temperature sensor.

  12. International Commitments Management

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2008-11-18

    This Order establishes a process to manage the Department's International Commitments under the administrative direction of the Office of Policy and International Affairs. No cancellation.

  13. PROJECT MANGEMENT PLAN EXAMPLES

    Broader source: Energy.gov (indexed) [DOE]

    accelerates the project schedule and significantly reduces the project total life cycle cost. Current Baseline (FY99 MYWP) Revised Project Baseline Project Scope: ...

  14. Monday, February 23, 2004 Decision on site for fusion project is put off again

    E-Print Network [OSTI]

    Monday, February 23, 2004 Decision on site for fusion project is put off again VIENNA (Kyodo) The six parties involved in an international nuclear fusion project have again failed to decide on either in March. Senior officials of the parties to the International Thermonuclear Experimental Reactor project

  15. Energy Research and Development Division FINAL PROJECT REPORT

    E-Print Network [OSTI]

    Energy Research and Development Division FINAL PROJECT REPORT SAIC SOLAR DISH, and demonstration (RD&D) projects to benefit California. The Energy Research and Development Division strives by Science Applications International Corp The information from this project contributes to Energy Research

  16. Energy Research and Development Division FINAL PROJECT REPORT

    E-Print Network [OSTI]

    Energy Research and Development Division FINAL PROJECT REPORT THE VALUE OF NATURAL GAS STORAGE, and demonstration (RD&D) projects to benefit California. The Energy Research and Development Division strives by ICF International. The information from this project contributes to Energy Research and Development

  17. Upper Trinity River Central City Modified Project Report

    E-Print Network [OSTI]

    US Army Corps of Engineers

    Appendix A Upper Trinity River Central City Modified Project Report Certifications This Appendix on technical components used in the preparation of the Modified Central City Project Report. The certifications November 2007. · Internal Quality Assurance reviews of the Modified Project Report, conducted by the Fort

  18. Cloudnet Project

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Hogan, Robin

    2008-01-15

    Cloudnet is a research project supported by the European Commission. This project aims to use data obtained quasi-continuously for the development and implementation of cloud remote sensing synergy algorithms. The use of active instruments (lidar and radar) results in detailed vertical profiles of important cloud parameters which cannot be derived from current satellite sensing techniques. A network of three already existing cloud remote sensing stations (CRS-stations) will be operated for a two year period, activities will be co-ordinated, data formats harmonised and analysis of the data performed to evaluate the representation of clouds in four major european weather forecast models.

  19. Cloudnet Project

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Hogan, Robin

    Cloudnet is a research project supported by the European Commission. This project aims to use data obtained quasi-continuously for the development and implementation of cloud remote sensing synergy algorithms. The use of active instruments (lidar and radar) results in detailed vertical profiles of important cloud parameters which cannot be derived from current satellite sensing techniques. A network of three already existing cloud remote sensing stations (CRS-stations) will be operated for a two year period, activities will be co-ordinated, data formats harmonised and analysis of the data performed to evaluate the representation of clouds in four major european weather forecast models.

  20. Project Overview

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration wouldMass mapSpeedingProgramExemptions |(Conference) | SciTechProjectITER Project

  1. Project Tour

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration wouldMass mapSpeedingProgramExemptions |(Conference)Project Tour Project Tour See NMSSUP from

  2. Graduate School of International Cooperation Studies Curriculum Policy

    E-Print Network [OSTI]

    Banbara, Mutsunori

    Advanced Research Special Lecture on Transnational Relations Project Appraisal and Policy Evaluation Issues Development Cooperation African Politics Presentation Japanese ODA Change in International Relations Special for Development Global Environmental Engineering Evaluation of Educational Development History of City

  3. 2012 CERTS Transmission Reliability R&D Internal Program Review...

    Office of Environmental Management (EM)

    Reliability R&D Internal Program Review June 12-13, 2012 LBNL Project Office 901 D St., SW Washington DC Nancy Lewis' cell: 510.918.3155 Revised Agenda: June 5, 2012 June 12, Day...

  4. The College of Science & Engineering STUDENT PROJECT

    E-Print Network [OSTI]

    The College of Science & Engineering STUDENT PROJECT S H O W C A S E & ALUMNI RECEPTION LIST Timpe (Chemistry & Biochemistry) SECOND PLACE Entry Number: 54 GP LOW-POWER COMPARATOR CIRCUIT FOR SWITCH BASED WIRELESS POWER TRANSFER IN IMPLANTS By: Casey Hardy and Dr. Hao Jiang Electrical Engineering

  5. on technology transfer, industry research +

    E-Print Network [OSTI]

    Cafarella, Michael J.

    on technology transfer, industry research + economic development annual report U N I V E R S I T Y and resources available at the University of Michigan as showcased in this year's Annual Report on Technology Transfer, Industry Research, and Economic Development. At the heart of the University's contributions

  6. 4065 (RP-664) Heat Transfer

    E-Print Network [OSTI]

    of roomsurface-to-air heat transmission is dependentonan accurateestimateof the filmcoefficient. Forty- eight4065 (RP-664) Convective Energy and Heat Transfer Thermal Load in Building Calculations Daniel E convection film coefficients significantly underpredict the rate of surface convective heat 'transfer

  7. Spent Nuclear Fuel project, project management plan

    SciTech Connect (OSTI)

    Fuquay, B.J.

    1995-10-25

    The Hanford Spent Nuclear Fuel Project has been established to safely store spent nuclear fuel at the Hanford Site. This Project Management Plan sets forth the management basis for the Spent Nuclear Fuel Project. The plan applies to all fabrication and construction projects, operation of the Spent Nuclear Fuel Project facilities, and necessary engineering and management functions within the scope of the project

  8. The institutional needs of joint implementation projects

    SciTech Connect (OSTI)

    Watt, E.; Sathaye, J. [Lawrence Berkeley Lab., CA (United States); Buen, O. de; Masera, O. [National Univ. of Mexico, Mexico City (Mexico); Gelil, I.A. [Organization of Energy Conservation and Planning, Cairo (Egypt); Ravindranath, N.H. [Indian Inst. of Science, Bangalore (India); Zhou, D.; Li, J. [Energy Research Inst., Beijing (China); Intarapravich, D. [Thailand Environmental Inst., Bangkok (Thailand)

    1995-10-21

    In this paper, the authors discuss options for developing institutions for joint implementation (JI) projects. They focus on the tasks which are unique to JI projects or require additional institutional needs--accepting the project by the host and investor countries and assessing the project`s greenhouse gas (GHG) emission reduction or sequestration--and they suggest the types of institutions that would enhance their performance. The evaluation is based on four sets of governmental and international criteria for JI projects, the experiences of ten pilot JI projects, and the perspectives of seven collaborating authors from China, Egypt, India, Mexico, and Thailand, who interviewed relevant government and non-government staff involved in JI issue assessment in their countries. After examining the roles for potential JI institutions, they present early findings arguing for a decentralized national JI structure, which includes: (1) national governmental panels providing host country acceptance of proposed JI projects; (2) project parties providing the assessment data on the GHG reduction or sequestration for the projects; (3) technical experts calculating these GHG flows; (4) certified verification teams checking the GHG calculations; and (5) members of an international JI Secretariat training and certifying the assessors, as well as resolving challenges to the verifications. 86 refs.

  9. Advances in refrigeration and heat transfer engineering

    SciTech Connect (OSTI)

    Bansal, Pradeep [ORNL; Cremaschi, Prof. Lorenzo [Oklahoma State University

    2015-01-01

    This special edition of Science and Technology for the Built Environment (STBE) presents selected high quality papers that were presented at the 15th International Refrigeration and Air Conditioning Conference held at Purdue University during July 14-17 2014. All papers went through the additional review before being finally accepted for publication in this special issue of Science and Technology and the Built Environment. Altogether 20 papers made to this special issue that cover a wide range of topics, including advancements in alternative refrigerants, heat exchangers/heat transfer, nano-fluids, systems design and optimization and modeling approaches. Although CO2 may perhaps have been the most researched and popular refrigerant in the past decade, R32 is being seriously considered lately as an alternative and environmentally friendly refrigerant for small systems due to its low Global Warming Potential (GWP).

  10. Property Transfer Review

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on DeliciousMathematicsEnergyInterested PartiesBuildingBudget || Department of Energy ProjectsER-B-98-07

  11. Final Project Report

    SciTech Connect (OSTI)

    Bogucz, E A

    2010-12-13

    This project pursued innovations to improve energy efficiency and indoor environmental quality (IEQ) in commercial and residential buildings. For commercial buildings, the project developed a testbed for “intelligent nested environmental systems technologies (iNEST),” which monitor and control energy flows and IEQ across a cascade of spaces from individuals’ desktops to office suites to floors to whole buildings. An iNEST testbed was constructed at Syracuse University and was used to assess the use of devices such as personal badges and CO2 sensors to study how reduced energy use and improved IEQ could be achieved. For residential buildings, resources were targeted in support of DoE’s Builders Challenge Program and to recruit Syracuse, NY builders. Three homes in Syracuse’s Near Westside neighborhood were also registered under the program by Syracuse University team, with an additional home registered by one of the builders. Findings from the work at the iNEST testbed facility, and results from other related projects were disseminated through Syracuse Center of Excellence in Environmental and Energy Systems (SyracuseCoE) 2008 Annual Symposium, the 9th International Healthy Buildings 2009 Conference & Exhibition, and through SyracuseCoE’s website and eNewsletters to inform the broader community of researchers, designers and builders. These public communication activities helped enhance the understanding of high performance buildings and facilitate further market acceptance.

  12. Final project report

    SciTech Connect (OSTI)

    Nitin S. Baliga and Leroy Hood

    2008-11-12

    The proposed overarching goal for this project was the following: Data integration, simulation and visualization will facilitate metabolic and regulatory network prediction, exploration, and formulation of hypotheses. We stated three specific aims to achieve the overarching goal of this project: (1) Integration of multiple levels of information such as mRNA and protein levels, predicted protein-protein interactions/associations and gene function will enable construction of models describing environmental response and dynamic behavior. (2) Flexible tools for network inference will accelerate our understanding of biological systems. (3) Flexible exploration and queries of model hypotheses will provide focus and reveal novel dependencies. The underlying philosophy of these proposed aims is that an iterative cycle of experiments, experimental design, and verification will lead to a comprehensive and predictive model that will shed light on systems level mechanisms involved in responses elicited by living systems upon sensing a change in their environment. In the previous years report we demonstrated considerable progress in development of data standards, regulatory network inference and data visualization and exploration. We are pleased to report that several manuscripts describing these procedures have been published in top international peer reviewed journals including Genome Biology, PNAS, and Cell. The abstracts of these manuscripts are given and they summarize our accomplishments in this project.

  13. Analysis of Bitcoin as a peer-to-peer network for international payments

    E-Print Network [OSTI]

    Böhme, Sascha

    2014-01-01

    The payment system is due for an overhaul. The antiquated infrastructure that runs the funds transfer network belongs to the pre-Internet era. As a result, international payments are expensive, slow, cumbersome, and not ...

  14. INTERNATIONAL CONFERENCE ON ENGINEERING DESIGN ICED 01 GLASGOW, AUGUST 21-23, 2001

    E-Print Network [OSTI]

    Kelly, Tim

    INTERNATIONAL CONFERENCE ON ENGINEERING DESIGN ICED 01 GLASGOW, AUGUST 21-23, 2001 TRANSFERRING will become of increasing importance as the company spreads capability and its acquisition around the world. 3

  15. Assessor Training International

    E-Print Network [OSTI]

    NVLAP Assessor Training International Arrangements #12;Assessor Training 2009: International;Assessor Training 2009: International Arrangements 3 2009 is the 10th anniversary of the signing granted by a signatory to the ILAC Arrangement #12;Assessor Training 2009: International Arrangements 4

  16. CERT tribal internship program. Final intern report: Melinda Jacquez, 1995

    SciTech Connect (OSTI)

    1998-09-01

    The purpose of the intern project was to write a comprehensive booklet on all state legislation proposed in 1995 on Native American issues. A second purpose was to contact tribal governments and request an ordinance, law or resolution on hazardous and nuclear waste transportation. This intern report contains a summary of bills proposed in 37 state legislatures pertaining to Native American issues. Time ran out before the second project objective could be met.

  17. 2011 International Pittsburgh Coal Conference Pittsburgh, PA

    E-Print Network [OSTI]

    Mohaghegh, Shahab

    Sequestration in Unmineable Coal with Enhanced Coal Bed Methane Recovery: The Marshall County Project James E conducted in Marshall County, West Virginia, USA, to evaluate enhanced coal bed methane recovery2011 International Pittsburgh Coal Conference Pittsburgh, PA September 12 ­ 15, 2011 CO2

  18. Turkey's Quest for Influence in International Governance

    E-Print Network [OSTI]

    Robeson, Scott M.

    Turkey's Quest for Influence in International Governance Professor Kemal Kirici Director of the Center on the United States and Europe's Turkey Project, Brookings Institution csme@indiana.edu www.iub.edu/~csme In the Arab world, Turkey is now seen as a source of chaos in the region and often

  19. COMPARING THE VANCOUVER INTERNATIONAL AIRPORT AUTHORITY'S

    E-Print Network [OSTI]

    prescribed authorities to conduct environmental impact assessments (EIAs) of projects carried out on federal environmental management. The International Association for Impact Assessment's (IAIA) Principles for EIA Best if the proposed CEAA regulations come into force. Keywords: Environmental impact assessment; best practice

  20. Department of Environmental Quality I. Internal Scan

    E-Print Network [OSTI]

    Tipple, Brett

    Department of Environmental Quality I. Internal Scan 1. Identify the impact of the increase in Utah in the Spring of each year. Potential impacts on the senior population from environmental projects ­ including susceptible to environmental pollution. DEQ is sensitive to these populations and considers potential impacts

  1. Physics Case for the International Linear Collider

    E-Print Network [OSTI]

    Keisuke Fujii; Christophe Grojean; Michael E. Peskin; Tim Barklow; Yuanning Gao; Shinya Kanemura; Hyungdo Kim; Jenny List; Mihoko Nojiri; Maxim Perelstein; Roman Poeschl; Juergen Reuter; Frank Simon; Tomohiko Tanabe; Jaehoon Yu; James D. Wells; Hitoshi Murayama; Hitoshi Yamamoto

    2015-06-26

    We summarize the physics case for the International Linear Collider (ILC). We review the key motivations for the ILC presented in the literature, updating the projected measurement uncertainties for the ILC experiments in accord with the expected schedule of operation of the accelerator and the results of the most recent simulation studies.

  2. Physics Case for the International Linear Collider

    E-Print Network [OSTI]

    Fujii, Keisuke; Peskin, Michael E; Barklow, Tim; Gao, Yuanning; Kanemura, Shinya; Kim, Hyungdo; List, Jenny; Nojiri, Mihoko; Perelstein, Maxim; Poeschl, Roman; Reuter, Juergen; Simon, Frank; Tanabe, Tomohiko; Yu, Jaehoon; Wells, James D; Murayama, Hitoshi; Yamamoto, Hitoshi

    2015-01-01

    We summarize the physics case for the International Linear Collider (ILC). We review the key motivations for the ILC presented in the literature, updating the projected measurement uncertainties for the ILC experiments in accord with the expected schedule of operation of the accelerator and the results of the most recent simulation studies.

  3. APPLICATION FORM International Experience in Energy, Environmental

    E-Print Network [OSTI]

    Subramanian, Venkat

    APPLICATION FORM International Experience in Energy, Environmental and Chemical Engineering The Department of Energy, Environmental and Chemical Engineering is pleased to announce an Undergraduate projects and other visits. In 2015, the class will be visiting Middle East Technical University in Ankara

  4. 10. international mouse genome conference

    SciTech Connect (OSTI)

    Meisler, M.H.

    1996-12-31

    Ten years after hosting the First International Mammalian Genome Conference in Paris in 1986, Dr. Jean-Louis Guenet presided over the Tenth Conference at the Pasteur Institute, October 7--10, 1996. The 1986 conference was a satellite to the Human Gene Mapping Workshop and had approximately 50 attendees. The 1996 meeting was attended by 300 scientists from around the world. In the interim, the number of mapped loci in the mouse increased from 1,000 to over 20,000. This report contains a listing of the program and its participants, and two articles that review the meeting and the role of the laboratory mouse in the Human Genome project. More than 200 papers were presented at the conference covering the following topics: International mouse chromosome committee meetings; Mutant generation and identification; Physical and genetic maps; New technology and resources; Chromatin structure and gene regulation; Rate and hamster genetic maps; Informatics and databases; and Quantitative trait analysis.

  5. Transfer Area Mechanical Handling Calculation

    SciTech Connect (OSTI)

    B. Dianda

    2004-06-23

    This calculation is intended to support the License Application (LA) submittal of December 2004, in accordance with the directive given by DOE correspondence received on the 27th of January 2004 entitled: ''Authorization for Bechtel SAX Company L.L. C. to Include a Bare Fuel Handling Facility and Increased Aging Capacity in the License Application, Contract Number DE-AC28-01R W12101'' (Arthur, W.J., I11 2004). This correspondence was appended by further Correspondence received on the 19th of February 2004 entitled: ''Technical Direction to Bechtel SAIC Company L.L. C. for Surface Facility Improvements, Contract Number DE-AC28-OIRW12101; TDL No. 04-024'' (BSC 2004a). These documents give the authorization for a Fuel Handling Facility to be included in the baseline. The purpose of this calculation is to establish preliminary bounding equipment envelopes and weights for the Fuel Handling Facility (FHF) transfer areas equipment. This calculation provides preliminary information only to support development of facility layouts and preliminary load calculations. The limitations of this preliminary calculation lie within the assumptions of section 5 , as this calculation is part of an evolutionary design process. It is intended that this calculation is superseded as the design advances to reflect information necessary to support License Application. The design choices outlined within this calculation represent a demonstration of feasibility and may or may not be included in the completed design. This calculation provides preliminary weight, dimensional envelope, and equipment position in building for the purposes of defining interface variables. This calculation identifies and sizes major equipment and assemblies that dictate overall equipment dimensions and facility interfaces. Sizing of components is based on the selection of commercially available products, where applicable. This is not a specific recommendation for the future use of these components or their related manufacturer. A component produced by one manufacturer certainly varies dimensionally from a similar product produced by a different manufacturer. The internal envelope dimensions are dependent on the selection of the individual components. The external envelope dimensions, as well as, key interface dimensions are established within this calculation and are to be treated as bounding dimensions.

  6. Urban Sewage Delivery Heat Transfer System (2): Heat Transfer 

    E-Print Network [OSTI]

    Zhang, C.; Wu, R.; Li, X.; Li, G.; Zhuang, Z.; Sun, D.

    2006-01-01

    analysis of above flow resistance and energy cost, we know that the economy flux ratio of transfer heat-transfer means is between 0.54 and 0.85, namely sewage flux is smaller, and minC Cr min wwCVc?= . It is necessary to point out that though depending... efficiency of contranatant two pass thimble: ()213 1 11 21wwNn wz tt Cr tt 1n? ?? ?==?+ ? (1) Fig.1 Reverse-flow heat efficiency of TDHTS Contranatant single pass heat-transfer efficiency: ( ) ()1 1exp (1 ) 1exp (1)n Cr NTU Cr? = ?? ? ? Put...

  7. Lemon Project Spring Symposium

    E-Print Network [OSTI]

    Fashing, Norman

    Lemon Project: A Journey of Reconciliation." The BOV defined Lemon "as a long- term research project

  8. RP-5 Renewable Energy Efficiency Project

    SciTech Connect (OSTI)

    Neil Clifton; Dave Wall; Jamal Zughbi

    2007-06-30

    This is the final technical report for the RP-5 Renewable Energy Efficiency Project (REEP). The report summarizes, in a comprehensive manner, all the work performed during the award period extending between July 12, 2002 and June 30, 2007. This report has been prepared in accordance with the Department of Energy (DOE) Guidelines and summarizes all of the activities that occurred during the award period. The RP-5 Renewable Energy Efficiency Project, under development by the Inland Empire Utilities Agency (IEUA), is comprised of a series of full-scale demonstration projects that will showcase innovative combinations of primary and secondary generation systems using methane gas derived from local processing of biosolids, dairy manure and other organic material. The goal of the project is to create renewable energy-based generation systems with energy efficiencies 65% or more. The project was constructed at the 15 MGD Regional Wastewater Treatment Plant No. 5 located in the City of Chino in California where the Agency has constructed its new energy-efficient (platinum-LEED rating) headquarters building. Technologies that were featured in the project include internal combustion engines (ICE), absorption chillers, treatment plant secondary effluent cooling systems, heat recovery systems, thermal energy storage (TES), Organic Rankine Cycle (ORC) secondary power generation system, the integration of a future fuel cell system, gas cleaning requirements, and other state-of-the-art design combinations. The RP-5 REEP biogas source is coming from three manure digesters which are located within the RP-5 Complex and are joined with the RP-5 REEP through gas conveyance pipelines. Food waste is being injected into the manure digesters for digester gas production enhancement. The RP-5 REEP clearly demonstrates the biogas production and power generation viability, specifically when dealing with renewable and variable heating value (Btu) fuel. The RP-5 REEP was challenged with meeting stringent utility, gas, power, and air quality rules and regulations. Coordination with the Southern California Gas Company (SCGC), Southern California Edison (SCE), and South Coast Air Quality Management District (SCAQMD) was continuous and extensive. The interconnecting agreement and the permit to construct and operate were major obstacles despite the early start and coordination with the utility companies and regulatory agencies. The RP-5 REEP is part of a unique RP-5 Complex approach where several facilities are tied and connected with each other; where energy and gas can be transferred from one facility to another (see attached RP-5 Complex Ultimate Energy Balance Diagram). The REEP also incorporated new technologies, such as TES and ORC, along with using heat recovery for the platinum-LEED headquarter buildings heating and cooling via efficient absorption chillers. Through the conceptual design phase, numerous innovative technologies were researched and evaluated, with the most proven and efficient selected to be part of the RP-5 REEP.

  9. IDEAS AND RESEARCH PROGRAMMES -EARTH'S ENVIRONMENT INTERNATIONAL COOPERATION

    E-Print Network [OSTI]

    Boyer, Edmond

    -Mazaudier IGRGEA: International Geophysical Research Group Europe Africa LPP : Laboratoire de Physique des Plasmas and SOUTH countries. We propose as an example of methodology of scientific project developed in an International Geophysical Research Group EUROPE AFRICA during the last decade with the new organization

  10. Transfer Factors for Contaminant Uptake by Fruit and Nut Trees

    SciTech Connect (OSTI)

    Napier, Bruce A.; Fellows, Robert J.; Minc, Leah D.

    2013-11-20

    Transfer of radionuclides from soils into plants is one of the key mechanisms for long-term contamination of the human food chain. Nearly all computer models that address soil-to-plant uptake of radionuclides use empirically-derived transfer factors to address this process. Essentially all available soil-to-plant transfer factors are based on measurements in annual crops. Because very few measurements are available for tree fruits, samples were taken of alfalfa and oats and the stems, leaves, and fruits and nuts of almond, apple, apricot, carob, fig, grape, nectarine, pecan, pistachio (natural and grafted), and pomegranate, along with local surface soil. The samples were dried, ground, weighed, and analyzed for trace constituents through a combination of induction-coupled plasma mass spectrometry and instrumental neutron activation analysis for a wide range of naturally-occurring elements. Analysis results are presented and converted to soil-to-plant transfer factors. These are compared to commonly used and internationally recommended values. Those determined for annual crops are very similar to commonly-used values; those determined for tree fruits show interesting differences. Most macro- and micronutrients are slightly reduced in fruits; non-essential elements are reduced further. These findings may be used in existing computer models and may allow development of tree-fruit-specific transfer models.

  11. SHARED TECHNOLOGY TRANSFER PROGRAM

    SciTech Connect (OSTI)

    GRIFFIN, JOHN M. HAUT, RICHARD C.

    2008-03-07

    The program established a collaborative process with domestic industries for the purpose of sharing Navy-developed technology. Private sector businesses were educated so as to increase their awareness of the vast amount of technologies that are available, with an initial focus on technology applications that are related to the Hydrogen, Fuel Cells and Infrastructure Technologies (Hydrogen) Program of the U.S. Department of Energy. Specifically, the project worked to increase industry awareness of the vast technology resources available to them that have been developed with taxpayer funding. NAVSEA-Carderock and the Houston Advanced Research Center teamed with Nicholls State University to catalog NAVSEA-Carderock unclassified technologies, rated the level of readiness of the technologies and established a web based catalog of the technologies. In particular, the catalog contains technology descriptions, including testing summaries and overviews of related presentations.

  12. Puerto Rico`s EcoElectrica LNG/power project marks a project financing first

    SciTech Connect (OSTI)

    Lammers, R.; Taylor, S.

    1998-02-23

    On Dec. 15, 1997, Enron International and Kenetech Energy Services achieved financial close on the $670 million EcoElectrica liquefied natural gas terminal and cogeneration project proposed for Puerto Rico. The project involves construction of a liquefied natural gas terminal, cogeneration plant, and desalination unit on the southern coast of Puerto Rico, in the Penuelas/Guayanilla area. EcoElectrica will include a 500-mw, combined-cycle cogeneration power plant fueled mainly by LNG imported from the 400 MMcfd Atlantic LNG project on the island of Trinidad. Achieving financial close on a project of this size is always a time-consuming matter and one with a number of challenges. These challenges were increased by the unique nature of both the project and its financing--no project financing had ever before been completed that combined an LNG terminal and power plant. The paper discusses the project, financing details and challenges, key investment considerations, and integrated project prospects.

  13. Hydropower Projects

    SciTech Connect (OSTI)

    2015-04-02

    The Water Power Program helps industry harness this renewable, emissions-free resource to generate environmentally sustainable and cost-effective electricity. Through support for public, private, and nonprofit efforts, the Water Power Program promotes the development, demonstration, and deployment of advanced hydropower devices and pumped storage hydropower applications. These technologies help capture energy stored by diversionary structures, increase the efficiency of hydroelectric generation, and use excess grid energy to replenish storage reserves for use during periods of peak electricity demand. In addition, the Water Power Program works to assess the potential extractable energy from domestic water resources to assist industry and government in planning for our nation’s energy future. From FY 2008 to FY 2014, DOE’s Water Power Program announced awards totaling approximately $62.5 million to 33 projects focused on hydropower. Table 1 provides a brief description of these projects.

  14. The Amtex DAMA Project: The Brookhaven contribution

    SciTech Connect (OSTI)

    Peskin, A.M.

    1995-01-01

    The Amtex Partnership organized in 1993 as a Technology Transfer Collaboration among members of the integrated textile industry, the DOE National Laboratories, a number of universities, and several research/education/technology transfer organizations (RETTs). Under the Amtex umbrella organization, a number of technology areas were defined and individual projects were launched addressing various aspects of improving the health and competitiveness of the American textile industry. The first and, to date, the largest of these has been the computer-based Demand Activated Manufacturing Architecture (DAMA) project. Brookhaven National Laboratory became involved in DAMA beginning in March of 1993 and remained an active participant through January of 1995. It was staffed almost exclusively with personnel of the Computing and Communications Division. This document summarizes the activities and accomplishments of the Brookhaven team in working with the larger collaboration. Detailed information about the Amtex Partnership, the DAMA Project, and specific BNL contributions are documented elsewhere.

  15. PROJECT SUMMARY

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankADVANCED MANUFACTURINGEnergy Bills andOrder 422.1, CONDUCT P - . . -Pathways)PROJECT SUMMARY 1 TITLE

  16. Hallmark Project

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum12,ExecutiveFinancing Programs |ReferencePowerHaier: OrderProject

  17. Vrije Universiteit Brussel Technology Transfer Interface

    E-Print Network [OSTI]

    Goelzer, Heiko

    Vrije Universiteit Brussel Technology Transfer Interface -connecting science and society- [for Prof. Hugo Thienpont More Information Technology Transfer Interface (TTI) Vrije Universiteit Brussel.interface@vub.ac.be - www.vubtechtransfer.be Vrije Universiteit Brussel Technology Transfer Interface -connecting science

  18. International Agreements/Collaborations

    Broader source: Energy.gov (indexed) [DOE]

    JCERDC envisions three awards for three jointly-funded projects. * Each project 50% cost-shared with private entities, in three distinct subject matter areas: * Solar energy...

  19. Technology Transfer Overview | Department of Energy

    Office of Environmental Management (EM)

    Technology Transfer Overview Technology Transfer Overview Through strategic investments in science and technology, the U.S. Department of Energy (DOE) helps power and secure...

  20. MODERN DEVELOPMENTS IN MULTIPHASE FLOW & HEAT TRANSFER

    E-Print Network [OSTI]

    Lahey, Richard T.

    MODERN DEVELOPMENTS IN MULTIPHASE FLOW & HEAT TRANSFER "ENGINEERING APPLICATIONS OF FRACTAL and multiphase flow & heat transfer will be stressed. This paper will begin by reviewing some important concepts

  1. Preparing for Transfer Biological Engineering

    E-Print Network [OSTI]

    Walter, M.Todd

    Preparing for Transfer Majors: Biological Engineering Chemical Engineering Civil Engineering Computer Science Electrical & Computer Engineering Engineering Physics Environmental Engineering Information Science, Systems, & Technology Materials Science & Engineering Mechanical Engineering Operations

  2. Preparing for Transfer Biological Engineering

    E-Print Network [OSTI]

    Walter, M.Todd

    Preparing for Transfer Majors: Biological Engineering Biomedical Engineering* Chemical Engineering Civil Engineering Computer Science Electrical & Computer Engineering Engineering Physics Environmental Engineering Information Science, Systems, & Technology Materials Science & Engineering Mechanical Engineering

  3. Knowledge Capture and Transfer Program

    Broader source: Energy.gov [DOE]

    The Office of Learning and Workforce Development is working with Heads of Departmental Elements, DOE senior leaders and subject-matter-experts to capture and transfer the knowledge and experiences...

  4. Electrohydrodynamically enhanced condensation heat transfer 

    E-Print Network [OSTI]

    Wawzyniak, Markus

    1993-01-01

    In a condenser the thickness of the liquid condensate film covering the cooled surface constitutes a resistance to the heat transfer. By establishing a non uniform electric field in the vicinity of the condensation surface the extraction of liquid...

  5. Wireless transfer of electric power

    E-Print Network [OSTI]

    Moffatt, Robert Alexander

    2009-01-01

    In this dissertation, I describe the design and construction of a system which can transfer electric power wirelessly. This is accomplished using inductive, near-field, non-radiative coupling between self-resonant copper ...

  6. Report of the SSHRC International Expert Panel Imagining Canada's Future

    E-Print Network [OSTI]

    1 Report of the SSHRC International Expert Panel for Imagining Canada's Future 9 December 2012's Imagining Canada's Future Project. #12;2 1. Introduction and Context The Panel is honoured to have been asked to participate in the "Imagining Canada's Future" project. The Panel recognizes the importance

  7. Automatic computation of transfer functions

    DOE Patents [OSTI]

    Atcitty, Stanley; Watson, Luke Dale

    2015-04-14

    Technologies pertaining to the automatic computation of transfer functions for a physical system are described herein. The physical system is one of an electrical system, a mechanical system, an electromechanical system, an electrochemical system, or an electromagnetic system. A netlist in the form of a matrix comprises data that is indicative of elements in the physical system, values for the elements in the physical system, and structure of the physical system. Transfer functions for the physical system are computed based upon the netlist.

  8. Spring 2014 Heat Transfer -2

    E-Print Network [OSTI]

    Virginia Tech

    Spring 2014 Heat Transfer - 2 A thin electronic chip is in the shape of a square wafer, b = 1 cm surface of the chip with a heat transfer coefficient of h = 100 W/m2 -K. Assume the chip has a uniform per side with a mass of m = 0.3 grams and specific heat of C = 103 J/kg-K. The chip is mounted

  9. CGS-MSFSS Project report

    SciTech Connect (OSTI)

    Harvey-Collard, Patrick

    2015-10-27

    From January 2015 to July 2015, I was doing research at Sandia National Laboratories in Albuquerque, United States. My work there consisted of performing experimental measurements using Sandia’s unique silicon quantum computing platform. The project is about coupling donor spin quantum bits, or qubits, to quantum dots in a silicon nanostructure based on conventional microchip technology. During the project, I devised a new quantum state readout mechanism that allow better, longer lived measurement signals. The measurement (or readout) mechanism is key to any qubit architecture. Next, I was able to demonstrate a quantum manipulation of the two-electron spin states of the coupled donor and quantum dot system. This constitutes a breakthrough for donor spin qubits in silicon because it could enable larger systems consisting of many qubits. This project will lead to publications in scientific journals, presentations in international conferences, and generates exciting new opportunities for manipulating nature at the nanoscale.

  10. Technology Transfer Plan

    SciTech Connect (OSTI)

    1998-12-31

    BPF developed the concept of a mobile, on-site NORM remediation and disposal process in late 1993. Working with Conoco and receiving encouragement born the Department of Energy, Metarie Office, and the Texas Railroad Commission the corporation conducted extensive feasibility studies on an on-site disposal concept. In May 1994, the Department of Energy issued a solicitation for cooperative agreement proposal for, "Development and Testing of a Method for Treatment and Underground Disposal of Naturally Occurring Radioactive Materials (NORM)". BPF submitted a proposal to the solicitation in July 1994, and was awarded a cooperative agreement in September 1995. BPF proposed and believed that proven equipment and technology could be incorporated in to a mobile system. The system would allow BPF to demonstrate an environmentally sound and commercially affordable method for treatment and underground disposal of NORM. The key stop in the BPF process incorporates injection of the dissolved radioactive materials into a water injection or disposal well. Disposal costs in the BPF proposal of July 1995 were projected to range from $1000 to $5000 per cubic yard. The process included four separate steps. (1) De-oiling (2) Volume Reduction (3) Chemical Dissolution of the Radium (4) Injection

  11. Multivariate volume visualization through dynamic projections

    SciTech Connect (OSTI)

    Liu, Shusen; Wang, Bei; Thiagarajan, Jayaraman J.; Bremer, Peer -Timo; Pascucci, Valerio

    2014-11-01

    We propose a multivariate volume visualization framework that tightly couples dynamic projections with a high-dimensional transfer function design for interactive volume visualization. We assume that the complex, high-dimensional data in the attribute space can be well-represented through a collection of low-dimensional linear subspaces, and embed the data points in a variety of 2D views created as projections onto these subspaces. Through dynamic projections, we present animated transitions between different views to help the user navigate and explore the attribute space for effective transfer function design. Our framework not only provides a more intuitive understanding of the attribute space but also allows the design of the transfer function under multiple dynamic views, which is more flexible than being restricted to a single static view of the data. For large volumetric datasets, we maintain interactivity during the transfer function design via intelligent sampling and scalable clustering. As a result, using examples in combustion and climate simulations, we demonstrate how our framework can be used to visualize interesting structures in the volumetric space.

  12. Geoelectrical Measurement of Multi-Scale Mass Transfer Parameters

    SciTech Connect (OSTI)

    Day-Lewis, Frederick; Singha, Kamini; Haggerty, Roy; Johnson, Tim; Binley, Andrew; Lane, John

    2014-01-16

    Mass transfer affects contaminant transport and is thought to control the efficiency of aquifer remediation at a number of sites within the Department of Energy (DOE) complex. An improved understanding of mass transfer is critical to meeting the enormous scientific and engineering challenges currently facing DOE. Informed design of site remedies and long-term stewardship of radionuclide-contaminated sites will require new cost-effective laboratory and field techniques to measure the parameters controlling mass transfer spatially and across a range of scales. In this project, we sought to capitalize on the geophysical signatures of mass transfer. Previous numerical modeling and pilot-scale field experiments suggested that mass transfer produces a geoelectrical signature—a hysteretic relation between sampled (mobile-domain) fluid conductivity and bulk (mobile + immobile) conductivity—over a range of scales relevant to aquifer remediation. In this work, we investigated the geoelectrical signature of mass transfer during tracer transport in a series of controlled experiments to determine the operation of controlling parameters, and also investigated the use of complex-resistivity (CR) as a means of quantifying mass transfer parameters in situ without tracer experiments. In an add-on component to our grant, we additionally considered nuclear magnetic resonance (NMR) to help parse mobile from immobile porosities. Including the NMR component, our revised study objectives were to: 1. Develop and demonstrate geophysical approaches to measure mass-transfer parameters spatially and over a range of scales, including the combination of electrical resistivity monitoring, tracer tests, complex resistivity, nuclear magnetic resonance, and materials characterization; and 2. Provide mass-transfer estimates for improved understanding of contaminant fate and transport at DOE sites, such as uranium transport at the Hanford 300 Area. To achieve our objectives, we implemented a 3-part research plan involving (1) development of computer codes and techniques to estimate mass-transfer parameters from time-lapse electrical data; (2) bench-scale experiments on synthetic materials and materials from cores from the Hanford 300 Area; and (3) field demonstration experiments at the DOE’s Hanford 300 Area. In a synergistic add-on to our workplan, we analyzed data from field experiments performed at the DOE Naturita Site under a separate DOE SBR grant, on which PI Day-Lewis served as co-PI. Techniques developed for application to Hanford datasets also were applied to data from Naturita. 1. Introduction The Department of Energy (DOE) faces enormous scientific and engineering challenges associated with the remediation of legacy contamination at former nuclear weapons production facilities. Selection, design and optimization of appropriate site remedies (e.g., pump-and-treat, biostimulation, or monitored natural attenuation) requires reliable predictive models of radionuclide fate and transport; however, our current modeling capabilities are limited by an incomplete understanding of multi-scale mass transfer—its rates, scales, and the heterogeneity of controlling parameters. At many DOE sites, long “tailing” behavior, concentration rebound, and slower-than-expected cleanup are observed; these observations are all consistent with multi-scale mass transfer [Haggerty and Gorelick, 1995; Haggerty et al., 2000; 2004], which renders pump-and-treat remediation and biotransformation inefficient and slow [Haggerty and Gorelick, 1994; Harvey et al., 1994; Wilson, 1997]. Despite the importance of mass transfer, there are significant uncertainties associated with controlling parameters, and the prevalence of mass transfer remains a point of debate [e.g., Hill et al., 2006; Molz et al., 2006] for lack of experimental methods to verify and measure it in situ or independently of tracer breakthrough. There is a critical need for new field-experimental techniques to measure mass transfer in-situ and estimate multi-scale and spatially variable mass-transfer parame

  13. Custom Projects

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submit theCovalent Bonding in ActinideRailCurrent ResearchInnovationCustom-Projects

  14. Project Title

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankADVANCED MANUFACTURINGEnergy Bills andOrderNATIONALofDefineEnergy NationalDepartmentProjectNE I&C

  15. Project Gnome

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration wouldMass mapSpeedingProgramExemptions |(Conference) | SciTechProject Gnome Double Beta Decay

  16. Project Title

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration wouldMass mapSpeedingProgramExemptions |(Conference) | SciTechProjectITERFebruaryStorage

  17. About Projects

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefieldSulfateSciTechtail.Theory of raregovAboutRecovery Act Recovery ActARM OverviewAbout GEDOE Projects

  18. Line Projects

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverseIMPACTThousand CubicResourcelogo and-E C H2015Tray and|Projects Pages default

  19. Critical Dose of Internal Organs Internal Exposure - 13471

    SciTech Connect (OSTI)

    Grigoryan, G.; Amirjanyan, A. [Nuclear and Radiation Safety Centre (Armenia)] [Nuclear and Radiation Safety Centre (Armenia); Grigoryan, N. [Yerevan State Medical University 4Tigran Mets,375010 Yerevan (Armenia)] [Yerevan State Medical University 4Tigran Mets,375010 Yerevan (Armenia)

    2013-07-01

    The health threat posed by radionuclides has stimulated increased efforts to developed characterization on the biological behavior of radionuclides in humans in all ages. In an effort motivated largely by the Chernobyl nuclear accident, the International Commission on Radiological Protection (ICRP) is assembling a set of age specific biokinetic models for environmentally important radioelements. Radioactive substances in the air, mainly through the respiratory system and digestive tract, is inside the body. Radioactive substances are unevenly distributed in various organs and tissues. Therefore, the degree of damage will depend not only on the dose of radiation have but also on the critical organ, which is the most accumulation of radioactive substances, which leads to the defeat of the entire human body. The main objective of radiation protection, to avoid exceeding the maximum permissible doses of external and internal exposure of a person to prevent the physical and genetic damage people. The maximum tolerated dose (MTD) of radiation is called a dose of radiation a person in uniform getting her for 50 years does not cause changes in the health of the exposed individual and his progeny. The following classification of critical organs, depending on the category of exposure on their degree of sensitivity to radiation: First group: the whole body, gonads and red bone marrow; Second group: muscle, fat, liver, kidney, spleen, gastrointestinal tract, lungs and lens of the eye; The third group: bone, thyroid and skin; Fourth group: the hands, forearms, feet. MTD exposure whole body, gonads and bone marrow represent the maximum exposures (5 rem per year) experienced by people in their normal activities. The purpose of this article is intended dose received from various internal organs of the radionuclides that may enter the body by inhalation, and gastrointestinal tract. The biokinetic model describes the time dependent distribution and excretion of different radionuclides that have intake into the organism or absorbed into blood. Transport of different radionuclides between compartments is assumed to follow first order kinetics provided the concentration in red blood cells (RBCs) stays below a nonlinear threshold concentration. When the concentration in RBCs exceeds that threshold, the transfer rate from diffusible plasma to RBCs is assumed to decrease as the concentration in RBCs increases. For the calculations used capabilities AMBER by using the traces of radionuclides in the body. Model for the transfer of radionuclides in the body has been built on the basis of existing models at AMBER for lead. (authors)

  20. International aeronautical user charges

    E-Print Network [OSTI]

    Odoni, Amedeo R.

    1985-01-01

    Introduction: 1.1 BACKGROUND AND MOTIVATION Very few issues relating to the international air transportation industry are today as divisive as those pertaining to user charges imposed at international airports and enroute ...

  1. Internal Wave Interferometry

    E-Print Network [OSTI]

    Mathur, Manikandan S.

    Internal waves are a ubiquitous and significant means of momentum and energy transport in the oceans, atmosphere, and astrophysical bodies. Here, we show that internal wave propagation in nonuniform density stratifications, ...

  2. Managing Internal Administrative Change

    E-Print Network [OSTI]

    Custer, Joseph A.

    2000-01-01

    Mr. Custer considers the impact of already instituted internal administrative change on library staff and how best to deal with it. He approaches the topic by describing what his own library did when faced with significant internal administrative...

  3. Essays in international trade

    E-Print Network [OSTI]

    Romalis, John

    2001-01-01

    This thesis is a collection of essays on the effect of trade costs on international trade. Chapter 1 derives and empirically examines how factor proportions determine the structure of commodity trade when international ...

  4. Geoelectrical Measurement of Multi-Scale Mass Transfer Parameters

    SciTech Connect (OSTI)

    Day-Lewis, Frederick David; Singha, Kamini; Johnson, Timothy C.; Haggerty, Roy; Binley, Andrew; Lane, John W.

    2014-11-25

    Mass transfer affects contaminant transport and is thought to control the efficiency of aquifer remediation at a number of sites within the Department of Energy (DOE) complex. An improved understanding of mass transfer is critical to meeting the enormous scientific and engineering challenges currently facing DOE. Informed design of site remedies and long-term stewardship of radionuclide-contaminated sites will require new cost-effective laboratory and field techniques to measure the parameters controlling mass transfer spatially and across a range of scales. In this project, we sought to capitalize on the geophysical signatures of mass transfer. Previous numerical modeling and pilot-scale field experiments suggested that mass transfer produces a geoelectrical signature—a hysteretic relation between sampled (mobile-domain) fluid conductivity and bulk (mobile + immobile) conductivity—over a range of scales relevant to aquifer remediation. In this work, we investigated the geoelectrical signature of mass transfer during tracer transport in a series of controlled experiments to determine the operation of controlling parameters, and also investigated the use of complex-resistivity (CR) as a means of quantifying mass transfer parameters in situ without tracer experiments. In an add-on component to our grant, we additionally considered nuclear magnetic resonance (NMR) to help parse mobile from immobile porosities. Including the NMR component, our revised study objectives were to: 1. Develop and demonstrate geophysical approaches to measure mass-transfer parameters spatially and over a range of scales, including the combination of electrical resistivity monitoring, tracer tests, complex resistivity, nuclear magnetic resonance, and materials characterization; and 2. Provide mass-transfer estimates for improved understanding of contaminant fate and transport at DOE sites, such as uranium transport at the Hanford 300 Area. To achieve our objectives, we implemented a 3-part research plan involving (1) development of computer codes and techniques to estimate mass-transfer parameters from time-lapse electrical data; (2) bench-scale experiments on synthetic materials and materials from cores from the Hanford 300 Area; and (3) field demonstration experiments at the DOE’s Hanford 300 Area. In a synergistic add-on to our workplan, we analyzed data from field experiments performed at the DOE Naturita Site under a separate DOE SBR grant, on which PI Day-Lewis served as co-PI. Techniques developed for application to Hanford datasets also were applied to data from Naturita.

  5. PROJECT MANGEMENT PLAN EXAMPLES Project Organization Examples

    Energy Savers [EERE]

    is responsible for supporting the FDH and RL project offices with adequate day-to-day planning and review technical management, coordination, control, and reporting of project...

  6. International Student Guide Mathematics

    E-Print Network [OSTI]

    Harman, Neal.A.

    International Student Guide Mathematics www.swansea.ac.uk/maths www.swansea.ac.uk/science/international #12;Reasons to study at Swansea University Mathematics at Swansea University Established in 1920, 36th and more Over 15,000 students / Over 2,000 International students Strongest in Wales for Mathematics

  7. International and Finance

    E-Print Network [OSTI]

    Little, Tony

    MSc International Accounting and Finance #12;What is International Accounting and Finance and why involved. Why study International Accounting and Finance at Stirling? One In the most recent Research Assessment Exercise, the University of Stirling's division of Accounting and Finance was rated first equal

  8. International Crystal Manufacturing

    E-Print Network [OSTI]

    Berns, Hans-Gerd

    International Crystal Manufacturing CRYSTAL OSCILLATOR AND FILTER PRODUCTS International Crystal Manufacturing, Inc. P.O. Box 26330 · Oklahoma City, OK 73126-0330 · Phone (405) 236-3741 Fax (405) 235@icmfg.com #12;2 International Crystal Manufacturing, Inc. P.O. Box 26330 · Oklahoma City, OK 73126-0330 · Phone

  9. Synergistic failure of BWR internals

    SciTech Connect (OSTI)

    A. G. Ware; T. Y. Chang

    1999-10-25

    Boiling Water Reactor (BWR) core shrouds and other reactor internals important to safety are experiencing intergranular stress corrosion cracking (IGSCC). The United States Nuclear Regulatory Commission has followed the problem, and as part of its investigations, contracted with the Idaho National Engineering and Environmental Laboratory to conduct a risk assessment. The overall project objective is to assess the potential consequences and risks associated with the failure of IGSCC-susceptible BWR vessel internals, with specific consideration given to potential cascading and common mode effects. An initial phase has been completed in which background material was gathered and evaluated, and potential accident sequences were identified. A second phase is underway to perform a simplified, quantitative probabilistic risk assessment on a representative high-power BWR/4. Results of the initial study conducted on the jet pumps show that any cascading failures would not result in a significant increase in the core damage frequency. The methodology is currently being extended to other major reactor internals components.

  10. Synergistic Failure of BWR Internals

    SciTech Connect (OSTI)

    Ware, Arthur Gates; Chang, T-Y

    1999-10-01

    Boiling Water Reactor (BWR) core shrouds and other reactor internals important to safety are experiencing intergranular stress corrosion cracking (IGSCC). The United States Nuclear Regulatory Commission has followed the problem, and as part of its investigations, contracted with the Idaho National Engineering and Environmental Laboratory to conduct a risk assessment. The overall project objective is to assess the potential consequences and risks associated with the failure of IGSCC-susceptible BWR vessel internals, with specific consideration given to potential cascading and common mode effects. An initial phase has been completed in which background material was gathered and evaluated, and potential accident sequences were identified. A second phase is underway to perform a simplified, quantitative probabilistic risk assessment on a representative high-power BWR/4. Results of the initial study conducted on the jet pumps show that any cascading failures would not result in a significant increase in the core damage frequency. The methodology is currently being extended to other major reactor internals components.

  11. Internal hydraulic jumps and overturning generated by tidal flow over a tall steep ridge

    E-Print Network [OSTI]

    Klymak, Jody M.

    that tidal energy is both converted into internal waves, which radiate away from the topography, and used of tidal mixing for global climate models, the physical processes governing the transfer of energy fromInternal hydraulic jumps and overturning generated by tidal flow over a tall steep ridge Sonya Legg

  12. CEC02 Paper Number: Proceedings 3rd International Conference on Concurrent Engineering in Construction

    E-Print Network [OSTI]

    Tommelein, Iris D.

    CEC02 Paper Number: Proceedings 3rd International Conference on Concurrent Engineering their approval, if any. I hereby transfer exclusively to Iris D. Tommelein, Editor of the Proceedings of the 3rd this work has been published by the Editor in the Proceedings of the 3rd International Conference

  13. Internal wave instability: Wave-wave versus wave-induced mean flow interactions

    E-Print Network [OSTI]

    Sutherland, Bruce

    Internal wave instability: Wave-wave versus wave-induced mean flow interactions B. R. Sutherland fluid, vertically propagating internal gravity waves of moderately large amplitude can become unstable, energy from primary waves is transferred, for example, to waves with half frequency. Self

  14. International energy outlook 1995, May 1995

    SciTech Connect (OSTI)

    1995-06-01

    The International Energy Outlook 1995 (IEO95) presents an assessment by the Energy Information Administration (EIA) of the international energy market outlook through 2010. The report is an extension of the EIA`s Annual Energy Outlook 1995 (AEO95), which was prepared using the National Energy Modeling System (NEMS). US projections appearing in the IEO95 are consistent with those published in the AEO95. IEO95 is provided as a statistical service to energy managers and analysts, both in government and in the private sector. The projects are used by international agencies, Federal and State governments, trade associations, and other planners and decisionmakers. They are published pursuant to the Department of energy Organization Act of 1977 (Public Law 95-91), Section 295(c). The IEO95 projections are based on US and foreign government policies in effect on October 1, 1994. IEO95 displays projections according to six basic country groupings. The regionalization has changed since last year`s report. Mexico has been added to the Organization for Economic Cooperation and Development (OECD), and a more detailed regionalization has been incorporated for the remainder of the world, including the following subgroups: non-OECD Asia, Africa, Middle East, and Central and South America. China is included in non-OECD Asia. Eastern Europe and the former Soviet Union are combined in the EE/FSU subgroup.

  15. Geothermal Energy Research and Development Program; Project Summaries

    SciTech Connect (OSTI)

    1994-03-01

    This is an internal DOE Geothermal Program document. This document contains summaries of projects related to exploration technology, reservoir technology, drilling technology, conversion technology, materials, biochemical processes, and direct heat applications. [DJE-2005

  16. World Energy Projection System Plus Model Documentation: Transportation Model

    Reports and Publications (EIA)

    2011-01-01

    This report documents the objectives, analytical approach and development of the World Energy Projection System Plus (WEPS ) International Transportation model. It also catalogues and describes critical assumptions, computational methodology, parameter estimation techniques, and model source code.

  17. EVALUATION PLAN PROJECT TRACS: EMPIRICALLY INVESTIGATING TRANSFORMATION THROUGH RELATEDNESS, AUTONOMY, AND COMPETENCE SUPPORT

    E-Print Network [OSTI]

    Maxwell, Bruce D.

    EVALUATION PLAN ­PROJECT TRACS: EMPIRICALLY INVESTIGATING TRANSFORMATION THROUGH RELATEDNESS OF CONTENTS PROJECT OVERVIEW 1 LOGIC MODEL 3 EVALUATION ACTIVITIES 4 BREAKDOWN OF TASKS: PROJECT TRACS TEAM, INTERNAL EVALUATOR, AND EXTERNAL EVALUATOR 15 TIMELINE OF EVALUATION ACTIVITIES 16 #12;1 I. PROJECT

  18. Summary audit report on lessons learned from the Superconducting Super Collider Project

    SciTech Connect (OSTI)

    1996-04-23

    In October 1993, the Congress decided to terminate the Superconducting Super Collider (SSC) project after expending about $1.57 billion on the project. While both internal and external factors contributed to the demise of the project, its cancellation offers the Department a unique opportunity to analyze what went wrong, correct the mistakes, and apply the lessons learned to future large-scale projects.

  19. Nanoscale heat transfer - from computation to experiment

    E-Print Network [OSTI]

    Luo, Tengfei

    2013-04-09

    Heat transfer can differ distinctly at the nanoscale from that at the macroscale. Recent advancement in

  20. Instantaneous pressure and heat transfer in pulse-stabilized fluidization

    SciTech Connect (OSTI)

    Beasley, D.E.; Postle, M.C. [Clemson Univ., SC (United States). Dept. of Mechanical Engineering; Pence, D.V. [Univ. of Rhode Island, Kingston, RI (United States). Dept. of Mechanical Engineering and Applied Mechanics

    1996-12-31

    A hybrid combustor concept that couples a pulsed combustor with an atmospheric bubbling fluidized bed was developed by Manufacturing Technology Conversion International, Inc. (MTCI, Inc.) and licensed to Thermo-Chem, Inc. This Pulsed Atmospheric Fluidized Bed technology has technical advantages in energy efficiency and emissions and is currently in pilot scale demonstration on the campus of Clemson University. The present study examines the effect of an opposing oscillatory flow on the pressure and overall heat transfer in a bubbling gas-fluidized bed. This opposing flow models the flow in the tailpipe of a pulsed combustor. Pressure measurements at the wall and on a submerged horizontal cylinder clearly indicate that the bed hydrodynamics are significantly altered by the opposing secondary flow. Under operating conditions of low secondary flow rates and pulse frequencies, the dominant frequency of the pressure fluctuations measured in the bed shifts from the natural, unforced response of the bed to the imposed frequency. For higher fluidization and secondary flow rates both the natural and forced response of the bed are present. Overall and time-averaged local heat transfer measurements from a submerged horizontal cylinder clearly indicate that the heat transfer rates are significantly altered by the opposing secondary flow. The most dramatic increases in heat transfer, on the order of 12%, were identified with operating conditions with low primary and secondary flow rates and pulse frequencies near the natural frequency of the bed. The local heat transfer was most significantly altered at the stagnation point. A modified form of the Strouhal number is shown to effectively describe the effect of pulse stabilization on overall heat transfer.

  1. PROJECT MANAGEMENT Professional Organizations

    E-Print Network [OSTI]

    Acton, Scott

    PROJECT MANAGEMENT Professional Organizations: Association of Collegiate Computing Services) Project Management Institute (PMI) Events & Training: UVA Local Support Partners (LSP) program training Project Management Institute webinars Project Management Institute events Scrum Alliance events Learning

  2. Project Management Lessons Learned

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2008-08-05

    The guide supports DOE O 413.3A, Program and Project Management for the Acquisition of Capital Assets, and aids the federal project directors and integrated project teams in the execution of projects.

  3. Polarisation Transfer in Proton Compton Scattering at High Momentum Transfer

    SciTech Connect (OSTI)

    David Hamilton

    2004-12-31

    The Jefferson Lab Hall A experiment E99-114 comprised a series of measurements to explore proton Compton scattering at high momentum transfer. For the first time, the polarisation transfer observables in the p (~ 0 ~ p) reaction were measured in the GeV energy range, where it is believed that quark-gluon degrees of freedom begin to dominate. The experiment utilised a circularly polarised photon beam incident on a liquid hydrogen target, with the scattered photon and recoil proton detected in a lead-glass calorimeter and a magnetic spectrometer, respectively.

  4. Deep Eutectic Salt Formulations Suitable as Advanced Heat Transfer Fluids

    SciTech Connect (OSTI)

    Raade, Justin; Roark, Thomas; Vaughn, John; Bradshaw, Robert

    2013-07-22

    Concentrating solar power (CSP) facilities are comprised of many miles of fluid-filled pipes arranged in large grids with reflective mirrors used to capture radiation from the sun. Solar radiation heats the fluid which is used to produce steam necessary to power large electricity generation turbines. Currently, organic, oil-based fluid in the pipes has a maximum temperature threshold of 400 °C, allowing for the production of electricity at approximately 15 cents per kilowatt hour. The DOE hopes to foster the development of an advanced heat transfer fluid that can operate within higher temperature ranges. The new heat transfer fluid, when used with other advanced technologies, could significantly decrease solar electricity cost. Lower costs would make solar thermal electricity competitive with gas and coal and would offer a clean, renewable source of energy. Molten salts exhibit many desirable heat transfer qualities within the range of the project objectives. Halotechnics developed advanced heat transfer fluids (HTFs) for application in solar thermal power generation. This project focused on complex mixtures of inorganic salts that exhibited a high thermal stability, a low melting point, and other favorable characteristics. A high-throughput combinatorial research and development program was conducted in order to achieve the project objective. Over 19,000 candidate formulations were screened. The workflow developed to screen various chemical systems to discover salt formulations led to mixtures suitable for use as HTFs in both parabolic trough and heliostat CSP plants. Furthermore, salt mixtures which will not interfere with fertilizer based nitrates were discovered. In addition for use in CSP, the discovered salt mixtures can be applied to electricity storage, heat treatment of alloys and other industrial processes.

  5. Perspectives on Project Finance

    Broader source: Energy.gov [DOE]

    Plenary III: Project Finance and Investment Perspectives on Project Finance John May, Managing Partner, Stern Brothers & Co.

  6. Community Renewables Projects

    Broader source: Energy.gov [DOE]

    This webinar covered introduction and barriers to individual renewable projects, resources for community and group buy projects, and permitting guidelines.

  7. Computer Vision Project Topics Project Reports

    E-Print Network [OSTI]

    Zhu, Zhigang

    (contour projection?). step5: choose a tolerance value(3 or 5 pixels) to evaluate the image with eachComputer Vision Project Topics CSc I6716 Spring2011 #12;Project Reports 1. Introduction (problem up with Nikolaos Markou? · Key Components ­ The project is to find a target image from bunch

  8. Project Final Report UBC LBS Project Services1 Project Final Report UBC LBS Project Services2

    E-Print Network [OSTI]

    is used as a foundation for all development, land use, and transportation activities at UBC. LBS Project Services is a fee-for-service provider of development, design, and project management servicesProject Final Report UBC LBS Project Services1 #12;Project Final Report UBC LBS Project Services2

  9. Micro-beam friction liner and method of transferring energy

    DOE Patents [OSTI]

    Mentesana, Charles (Leawood, KS)

    2007-07-17

    A micro-beam friction liner adapted to increase performance and efficiency and reduce wear in a piezoelectric motor or actuator or other device using a traveling or standing wave to transfer energy in the form of torque and momentum. The micro-beam friction liner comprises a dense array of micro-beam projections having first ends fixed relative to a rotor and second ends projecting substantially toward a plurality of teeth of a stator, wherein the micro-beam projections are compressed and bent during piezoelectric movement of the stator teeth, thereby storing the energy, and then react against the stator teeth to convert the stored energy stored to rotational energy in the rotor.

  10. Establishment of the International Power Institute

    SciTech Connect (OSTI)

    Coles, Julius E.

    2000-04-29

    Building on the two previous trips to Central America last year, International Power Institute (IPI) and its partner Tennessee Valley Infrastructure Group (TVIG) have focused their attention this quarter on project sites in Honduras. TVIG's unit--an Integrated Infrastructure Platform or IIP--combines water and electricity production in a single integrated unit, thereby providing both products at a lower cost than could be attained for each one separately. Because of the unmet demand for clean drinking water and electricity in remote towns throughout the developing world, the need for such units is widespread. Previous visits to Honduras have resulted in strong in-country commercial interest, support in the form of memorandums of understanding by key government agencies, and identification of four prospective project sites for IIP installations. From March 5 to March 15 and with IPI support and participation, representatives from the TVIG, Tennessee Valley Authority (TVA), IPI, and market research firm International Business Initiatives (IBI) conducted an intensive survey of project opportunities in the four communities, to establish how IIPs might help these four communities enhance their economic development, A key aspect of the projects examined is the need to make them economically self-supporting so that they will be viable in the private sector. Summary of specific project site studies follow here, and feasibility studies for the four sites are included as attachments.

  11. Radiative transfer in decomposed domains

    E-Print Network [OSTI]

    T. Heinemann; W. Dobler; A. Nordlund; A. Brandenburg

    2005-11-09

    An efficient algorithm for calculating radiative transfer on massively parallel computers using domain decomposition is presented. The integral formulation of the transfer equation is used to divide the problem into a local but compute-intensive part for calculating the intensity and optical depth integrals, and a nonlocal part for communicating the intensity between adjacent processors. The waiting time of idle processors during the nonlocal communication part does not have a severe impact on the scaling. The wall clock time thus scales nearly linearly with the inverse number of processors.

  12. Final Project Report

    SciTech Connect (OSTI)

    Zhang, Jin; Zhao, Yiping

    2014-12-05

    In this entire project period from 2005-2014, we have made significant progress in developing novel nanostructures of metal oxides (MOs) for solar hydrogen generation based on photoelectrochemical (PEC). Materials investigated are focused on 1D and 0D MO nanostructures of TiO2, WO3, ZnO, and Fe2O3 in conjunction with quantum dot (QD) sensitization and chemical doping (N or H) to alter their electronic band structures for both visible light absorption and for facilitating interfacial charge transport. In addition, we have used plasmonic metal nanostructures to enhance the PEC performance by improving light absorption of QDs via enhanced scattering of the plamonic metal. Most importantly, we have discovered a multipronged strategy for improving PEC performance: using plasmonic metal nanostructure to enhance light absorption, QDs to improve charge transfer, and chemical doping to increase charge transport in metal oxides for PEC. The combination is critical for overall high efficiency of PEC. This strategy is developed and demonstrated for the first time to our best knowledge.

  13. 7th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics

    E-Print Network [OSTI]

    Abdou, Mohamed

    , under construction by an international consortium in Cadarache, France, and the 19 #12;7th Worldi #12;ExHFT-7 7th World Conference on Experimental Heat Transfer, Fluid Mechanics FOR HUMANITY M. A. Abdou Center for Energy Science and Technology Advanced Research (CESTAR), Los Angeles, USA

  14. Proton transfer via a transient linear water-molecule chain in a membrane protein

    E-Print Network [OSTI]

    Gerwert, Klaus

    Proton transfer via a transient linear water-molecule chain in a membrane protein Erik Freiera,1-resolution protein ground-state structures of proton pumps and channels have revealed internal protein-bound water. An illustration of the formation of a pro- tonated protein-bound water cluster that is actively involved in proton

  15. International Building Energy eXchange (IBEX) Database

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    This site will help you find information on current, international projects or other activities (e.g., strategic dialogs or initiatives) related to energy efficiency and renewable energy in buildings. The database includes collaborative international projects/activities funded by the U.S. Department of Energy, other U.S. federal agencies, development banks, and selected foundations and non-governmental organizations. The IBEX database enables you to learn about specific buildings-related projects of interest and who is working on them, understand the distribution of projects (e.g., geographic distribution and types of projects going forward), discover potential markets, and understand where there are research gaps and opportunities for collaboration.

  16. Renewable Energy and the International Performance Measurement and Verification Protocol

    SciTech Connect (OSTI)

    Walker, A.; Thompson, A.; Mills, D.; Kats, G. H.

    1999-04-14

    The Renewables Subcommittee for the International Performance Measurement and Verification Protocol (IPMVP) is developing a section of the IPMVP treating the special issues related to performance measurement of renewable energy systems. An industry consensus framework for measuring project benefits is important in realizing the promise of renewable energy. This work represents a voluntary, consensus-building process among sponsoring organizations from 21 countries and several disciplines. Measurement and Verification (M&V) can provide a common tool for standardization to support performance-based contracting, financing, and emissions trading. M&V can ensure that savings and generation requirements in energy projects will be achieved accurately and objectively. The protocol defines procedures that are consistently applicable to similar projects, internationally accepted, and reliable. Actual M&V project results can demonstrate success and provide developers, investors, lenders, and customers with more confidence in the value of future projects.

  17. Renewable energy and the International Performance Measurement and Verification Protocol

    SciTech Connect (OSTI)

    Walker, A.; Thompson, A.; Mills, D.; Kats, G.H.

    1999-07-01

    The Renewables Subcommittee for the International Performance Measurement and Verification Protocol (IPMVP) is developing a section of the IPMVP treating the special issues related to performance measurement of renewable energy systems. An industry consensus framework for measuring project benefits is important in realizing the promise of renewable energy. This work represents a voluntary, consensus-building process among sponsoring organizations from 21 countries and several disciplines. Measurement and Verification (M and V) can provide a common tool for standardization to support performance-based contracting, financing, and emissions trading. M and V can ensure that savings and generation requirements in energy projects will be achieved accurately and objectively. The protocol defines procedures that are consistently applicable to similar projects, internationally accepted, and reliable. Actual M and V project results can demonstrate success and provide developers, investors, lenders, and customers with more confidence in the value of future projects.

  18. UndergradUateadmission2015 INTERNATIONAL

    E-Print Network [OSTI]

    Ullrich, Paul

    -division transfer students. Also available as a minor. COLLEGE OF AGRICULTURAL AND ENVIRONMENTAL SCIENCES caes

  19. Saving Your Data (Data Transfer) Transfer Raw Data to Another Computer

    E-Print Network [OSTI]

    California at San Diego, University of

    Saving Your Data (Data Transfer) Transfer Raw Data to Another Computer 1. Open a terminal 2 the Data Manager window 2. Right click the scan you want to save or the whole study and select "Transfer

  20. Transfer Factors for Contaminant Uptake

    E-Print Network [OSTI]

    of supply, upon written request as follows: Address: U.S. Nuclear Regulatory Commission OfficeTransfer Factors for Contaminant Uptake by Fruit and Nut Trees Office of Nuclear Regulatory; licensee event reports; and Commission papers and their attachments. NRC publications in the NUREG series

  1. Spring 2014 Heat Transfer -1

    E-Print Network [OSTI]

    Virginia Tech

    Spring 2014 1 Heat Transfer - 1 Consider a cylindrical nuclear fuel rod of length L and diameter df and the tube at a rate m , and the outer surface of the tube is well insulated. Heat generation occurs within. The specific heat of water pc , and the thermal conductivity of the fuel rod fk are constants. The system

  2. Technology transfer package on seismic base isolation - Volume III

    SciTech Connect (OSTI)

    1995-02-14

    This Technology Transfer Package provides some detailed information for the U.S. Department of Energy (DOE) and its contractors about seismic base isolation. Intended users of this three-volume package are DOE Design and Safety Engineers as well as DOE Facility Managers who are responsible for reducing the effects of natural phenomena hazards (NPH), specifically earthquakes, on their facilities. The package was developed as part of DOE's efforts to study and implement techniques for protecting lives and property from the effects of natural phenomena and to support the International Decade for Natural Disaster Reduction. Volume III contains supporting materials not included in Volumes I and II.

  3. Fixation of Radiological Contamination; International Collaborative Development

    SciTech Connect (OSTI)

    Rick Demmer

    2013-03-01

    A cooperative international project was conducted by the Idaho National Laboratory (INL) and the United Kingdom’s National Nuclear Laboratory (NNL) to integrate a capture coating with a high performance atomizing process. The initial results were promising, and lead to further trials. The somewhat longer testing and optimization process has resulted in a product that could be demonstrated in the field to reduce airborne radiological dust and contamination.

  4. Project Title: Navy-Civilian Relations Bachelor of Arts Internship

    E-Print Network [OSTI]

    Hickman, Mark

    Project Title: Navy-Civilian Relations Bachelor of Arts Internship Company/Organization: The Royal New Zealand Navy Intern Position Title: Researcher Organisation Supervisor: Lance Kenyon, Warrant February, 11:00 am Project Description: The Royal New Zealand Navy identifies itself as protecting New

  5. World Energy Projection System Plus (WEPS ): Global Activity Module

    Reports and Publications (EIA)

    2013-01-01

    World Energy Projection System Plus Model Documentation: Global Activity Module Documents the objectives, analytical approach, and development of the World Energy Projection Plus (WEPS ) Global Activity Module (GAM) used to develop the International Energy Outlook for 2013 (IEO2013). The report catalogues and describes the module assumptions, computations, methodology, parameter estimation techniques, and mainframe source code.

  6. Internal Revenue Service

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ABCDEFGHI ABCDEFGHI ABCDEFGHI ABCDEFGHI ABCDEFGHI ABCDEFGHI ABCDEFGHI ABCDE 200254 X PREPAID LEGAL X SCHEDULE A (Form 5500) Department of the Treasury Internal Revenue Service...

  7. International petroleum statistics report

    SciTech Connect (OSTI)

    1996-08-01

    This report provides information on current international petroleum production, demand, imports, and stocks. World oil demand and OECD demand data are presented for the years 1970 thru 1995.

  8. HydroVision International

    Broader source: Energy.gov [DOE]

    The HydroVision International Conference and Exhibition offers attendees countless opportunities to network, share best practices, meet with product and service providers, and more.  Held over five...

  9. WIPP Attracts International Interest

    Broader source: Energy.gov [DOE]

    CARLSBAD, N.M. – EM’s Waste Isolation Pilot Plant (WIPP) was in the spotlight with two international organizations at meetings held in Europe late last year.

  10. International Subcommittee Report

    Energy Savers [EERE]

    the new realities of the global industry where there are many international suppliers of nuclear power plants and fuel cycle services U.S. government nuclear strategy...

  11. Technology transfer personnel exchange at the Boeing Company

    SciTech Connect (OSTI)

    Antoniak, Z.I.

    1993-03-01

    The objective of the exchange was to transfer Pacific Northwest Laboratory (PNL) technology and expertise in advanced ceramic fabric composites (ACFC) to the Boeing Defense Space Group (Boeing Aerospace). Boeing Aerospace was especially interested in applying PNL-developed ACFC technology to its current and future spacecraft and space missions. Boeing has on-going independent research and development (R D) programs on advanced radiators and heat pipes, therefore, PNL research in ceramic fabric heat pipes was of particular interest to Boeing. Thus, this exchange assisted in the transfer of PNL's ACFC heat pipe technology and other, related research capabilities to private industrial application. The project was proposed as an initial step in building a long-term collaborative relationship between Boeing and PNL that may result in future Cooperative Research and Development Agreements (CRADAs) and/or other types of collaborative efforts.

  12. Technology transfer personnel exchange at the Boeing Company

    SciTech Connect (OSTI)

    Antoniak, Z.I.

    1993-03-01

    The objective of the exchange was to transfer Pacific Northwest Laboratory (PNL) technology and expertise in advanced ceramic fabric composites (ACFC) to the Boeing Defense & Space Group (Boeing Aerospace). Boeing Aerospace was especially interested in applying PNL-developed ACFC technology to its current and future spacecraft and space missions. Boeing has on-going independent research and development (R&D) programs on advanced radiators and heat pipes, therefore, PNL research in ceramic fabric heat pipes was of particular interest to Boeing. Thus, this exchange assisted in the transfer of PNL`s ACFC heat pipe technology and other, related research capabilities to private industrial application. The project was proposed as an initial step in building a long-term collaborative relationship between Boeing and PNL that may result in future Cooperative Research and Development Agreements (CRADAs) and/or other types of collaborative efforts.

  13. International Projects: Education Grant value over $250,000

    E-Print Network [OSTI]

    , Guinea, Guinea-Bissau, Kenya, Lesotho, Liberia, Madagascar, Malawi, Mali, Mauritius, Mozambique, Namibia

  14. Sandia Energy - Mesa del Sol Project Is Finalist for International...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Infrastructure Security Renewable Energy Energy Surety Mesa del Sol Energy Facilities Grid Integration Partnership News Distribution Grid Integration News & Events Photovoltaic...

  15. International Projects: Education Grant value over $250,000

    E-Print Network [OSTI]

    , Benin, Botswana, Burkina Faso, Burundi, Cameroon, Cape Verde, Central Afrian Republic, Comoros, Congo

  16. ISO launches a project committee to develop an International...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    management (April 2008) More Documents & Publications ISO 50001 Brochure The Do and Check Processes of an Energy Management System Introduction to an Energy Management System...

  17. 2015 Project Peer Review International SustainabilityandIEA Bioenergy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    20. Bioenergy Economics and Policies 21. Biomass Resources, Energy Access and Poverty Reduction http:bioenfapesp.orgscopebioenergyindex.phpproject-overview BETO Labs...

  18. The Liberal Project in International Relations Spring 2010

    E-Print Network [OSTI]

    Stoiciu, Mihai

    :00pm, Fridays 9:30am-11:30am and by appointment Course Description The most powerful actors, 1983. 2. Carl Schmitt, The Concept of the Political, expanded edition. University of Chicago Press, 2007. 3. Carl Schmitt, Political Theology: Four Chapters on the Concept of Sovereignty. University

  19. Data Management in an International Data Grid Project

    E-Print Network [OSTI]

    Hoschek, Wolfgang

    , Asad Samar1,4 , Heinz Stockinger1,2 , and Kurt Stockinger1,2 1 CERN, European Organization for Nuclear world-wide distributed next generation experiments in High- Energy Physics, Earth Observation environments. The middleware will allow secure access to massive amounts of data in a universal names- pace

  20. Energy Efficiency Projects: Overcoming Internal Barriers to Implementa...

    Broader source: Energy.gov (indexed) [DOE]

    * Reduced energy intensity * Reduced Carbon footprint. We are the GLUE for Energy Efficiency WE ARE NOT: Asset Owners Police Bank Manufacturing Process Experts Duplicative WE...

  1. CGILS: Results from the First Phase of an International Project...

    Office of Scientific and Technical Information (OSTI)

    Models Large Eddy Models (LES) and Single Column Models (SCM) are used in a surrogate climate change 101 to investigate the physical mechanism of low cloud feedbacks in climate...

  2. The Coso EGS Project, recent developments (in International collaborat...

    Open Energy Info (EERE)

    collaboration for geothermal energy in the Americas) Abstract A preliminary fracturestress analysis was conducted for the recently drilled well 38C-9 as part of a continuing...

  3. Project: An International Network on Expectational coordination. 1. Introduction.

    E-Print Network [OSTI]

    Tesfatsion, Leigh

    to herd or more generally may generate inefficiencies or failures of social learning (which often have capabilities of the system, which, as is now argued by many, is at the heart of its recent failures. 2

  4. International Hellenic University "Smart I.H.U. Project"

    E-Print Network [OSTI]

    Psarrakos, Panayiotis

    . The expected outcomes concern Platform to be used in Buildings for Efficient Energy Management Help Integration Systems · MSc in Information and Communication Technology Systems School of Humanities · MA in Black Sea parameters and develop load control algorithms for efficient energy management and automation at IHU

  5. Better than Average? - Green Building Certification in International Projects 

    E-Print Network [OSTI]

    Baumann, O.

    2008-01-01

    Systems, such as LEED, BREEAM, Green Globe, etc. became more and more popular during the last few years ? new systems, such as the German DGNB Certificate are under development. It is remarkable, that the driving mechanism to apply these rating systems...

  6. The ITER Project: International Collaboration to Demonstrate Nuclear Fusion

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservationBio-Inspired Solar FuelTechnologyTel: Name: Rm.mountains" LandscapestheThe|

  7. EM International Project Submission Template | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergy A plug-inPPL EnergyPlus, LLCConfidentiality Agreement between the USThe template

  8. Energy Efficiency Projects: Overcoming Internal Barriers to Implementation

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergy A plug-inPPLfor Innovative Solar PowerTribes to Develophosted anDepartment|

  9. List of International Projects for FY 2012 | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergy A plug-inPPLforLDRDEnergyTurbineProcesses to Their Environmental

  10. Project Profile: The International City/County Management Association |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankADVANCED MANUFACTURINGEnergy Bills andOrderNATIONALofDefineEnergy National Solar

  11. China-International Industrial Energy Efficiency Deployment Project | Open

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX E LISTStar Energy LLCLtd Jump to:ChangingCNE Jump to:New EnergyPFAN)Energy

  12. Marine Projects International Ltd MPI formerly Mayflower Energy Ltd | Open

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX E LIST OFAMERICA'SHeavyAgency (IRENA) JumpLiterature ReviewMaka Windkraft GmbHEnergy

  13. India-International Industrial Energy Efficiency Deployment Project | Open

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX E LISTStar2-0057-EA JumpDuimen RiverScoringUtilitiesRenovInceisa SAIBFCDanishEnergy

  14. SolarPaces International CSP Project Information | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX ECoop Inc JumpHeter Battery TechnologySocovoltaicCorporationTechnology Inc

  15. RETScreen International Clean Energy Project Analysis Tool | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION JEnvironmental Jump to:EA EIS Report UrlNM-b < RAPID‎ |RENERCO Renewable EnergyInformation

  16. The Coso EGS Project, recent developments (in International collaboration

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION JEnvironmental Jump to:EA EISTJ AutomationTexas/Wind Resources <for geothermal energy in the

  17. International Carbon Storage Body Praises Department of Energy Projects |

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyTher i nA Guide toIMPROVEMENTGDLB-115)Comments ReceivedWright, INL, presentation

  18. Honeywell International, Inc Smart Grid Project | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIXsource History View NewGuam: Energyarea,Magazine Jump to: navigation,(SREP) |Inc Smart

  19. EM International Project Submission Template | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum Based|DepartmentStatement |toDepartmentContributesAdvisoryProgram

  20. Energy Efficiency Projects: Overcoming Internal Barriers to Implementation

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum12, 2015 Infographic courtesyEducation Data Jam EnergyEfficiencyRICHMOND SITE

  1. Projective ML Didier Remy

    E-Print Network [OSTI]

    Rémy, Didier

    Projective ML Didier Remy INRIA-Rocquencourt Apr 10, 1992 Abstract We propose a projective lambda calculus as the ba- sis for operations on records. Projections operate on elevations, that is, records projective ML from this calculus by adding the ML Let typing rule to the simply typed projective calculus. We

  2. Web-enabled project management and collaboration using Microsoft Groove system 

    E-Print Network [OSTI]

    Yuksel, Kamer

    2008-10-10

    Application Service Provider CFMA Construction Financial Management Association EDA Electronic Data Interchange FTP File Transfer Protocols IT Information Technology NSPE National Society of Professional Engineers PMCS Project Management... ............................................................................................................56 5.3 Files Tool..................................................................................................................57 5.4 Forms Tool...

  3. Resource Portfolio Problem under Relaxed Resource Dedication Policy in a Multi-Project Environment

    E-Print Network [OSTI]

    Yanikoglu, Berrin

    1 Resource Portfolio Problem under Relaxed Resource Dedication Policy in a Multi resource dedication policy, multi-project schedul- ing. 1 Introduction The characterization of the way transfer times. An- other resource management policy called resource dedication policy is proposed

  4. Recoil Polarization Measurements of the Proton Electromagnetic Form Factor Ratio to High Momentum Transfer

    E-Print Network [OSTI]

    Puckett, Andrew J R

    2015-01-01

    The electromagnetic form factors of the nucleon characterize the effect of its internal structure on its response to an electromagnetic probe as studied in elastic electron-nucleon scattering. These form factors are functions of the squared four-momentum transfer $Q^2$ between the electron and the proton. The two main classes of observables of this reaction are the scattering cross section and polarization asymmetries, both of which are sensitive to the form factors in different ways. When considering large momentum transfers, double-polarization observables offer superior sensitivity to the electric form factor. This thesis reports the results of a new measurement of the ratio of the electric and magnetic form factors of the proton at high momentum transfer using the recoil polarization technique. A polarized electron beam was scattered from a liquid hydrogen target, transferring polarization to the recoiling protons. These protons were detected in a magnetic spectrometer which was used to reconstruct their ...

  5. Project Reports for Haida Corporation- 2010 Project

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Reynolds Creek Hydroelectric Project ("Reynolds Creek" or the "Project") is a 5 MW hydroelectric resource to be constructed on Prince of Wales Island, Alaska, approximately 10 miles east of Hydaburg.

  6. Chemistry Transfer Evaluations Before requesting a transfer evaluation, please look up your courses on the UO Transfer Credit

    E-Print Network [OSTI]

    Cina, Jeff

    Chemistry Transfer Evaluations Before requesting a transfer evaluation, please look up your courses://registrar.uoregon.edu/current_students/transfer-articulation If your Chemistry courses have not been evaluated, or if you feel the evaluation is not correct, then fill out this form and bring it and the associated documents to a Chemistry advisor. Name

  7. OSCOLA 2006 CITING INTERNATIONAL

    E-Print Network [OSTI]

    Neri, Peter

    Law provides a useful guide to sources of international law (www.eisil.org), and includes information about how to cite a great variety of sources of international law (under the `More information' links for Primary Documents). The General Principles in Part III B, `Other Sources', provide guidelines for citing

  8. CAREERS at the International

    E-Print Network [OSTI]

    Hart, Gus

    for cooperation in the nuclear field committed to promoting safe, secure and peaceful uses of nuclear technologyMembersHaveExpertiseintheFollowingFields: Accounting/Finance Nuclear Energy Agriculture Nuclear Engineering Computer Sciences Nuclear Medicine EnergyCAREERS at the IAEA International Employment Opportunities at the International Atomic Energy

  9. Fifth International Workshop on

    E-Print Network [OSTI]

    Amaral, Luis A.N.

    (DELTA) re itute on C research gr to Social N of ty Network Sc Movement Southern Ca ersity of esearchFifth International Workshop on Network Theory: Network Science Meets the Science of Teams Theory, Lo Second Inte in the Digita Los Angeles Third Intern March 4-6, 2 Fourth Inte Network Th Los

  10. International Experience Singapore 2014

    E-Print Network [OSTI]

    Subramanian, Venkat

    , energy and environmental issues in India, alternative energy and technology in China and Hong KongInternational Experience Singapore 2014 Department of Energy, Environmental And Chemical Experience Program is part of the McDonnell International Scholars Academy Global Energy & Environment

  11. INTERNATIONAL STUDY CENTRE

    E-Print Network [OSTI]

    Fletcher, Robin

    the BADER INTERNATIONAL STUDY CENTRE at Herstmonceux Castle 2015 #12;welcome to the Castle #12;LEARN 4 4 Experiential Learning 6 21st Century Education 7 Supporting your Success STUDY 8 9 First; The fact that the Bader International Study Centre operates within the walls of a fifteenthcentury English

  12. Direct transfer of graphene onto flexible substrates

    E-Print Network [OSTI]

    Araujo, Paulo Antonio Trinidade

    In this paper we explore the direct transfer via lamination of chemical vapor deposition graphene onto different flexible substrates. The transfer method investigated here is fast, simple, and does not require an intermediate ...

  13. NERSC HPSS Bandwidth and Transfer Activity

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Aggregate Transfer Bandwidth This graph shows the aggregate transfer rate to the storage systems as a function of time of day. The red line is the peak bandwidth observed within...

  14. Engineering nanocarbon interfaces for electron transfer

    E-Print Network [OSTI]

    Hilmer, Andrew J. (Andrew Joseph)

    2013-01-01

    Electron-transfer reactions at nanometer-scale interfaces, such as those presented by single-walled carbon nanotubes (SWCNTs), are important for emerging optoelectronic and photovoltaic technologies. Electron transfer also ...

  15. Power transfer through strongly coupled resonances

    E-Print Network [OSTI]

    Kurs, André

    2007-01-01

    Using self-resonant coils in a strongly coupled regime, we experimentally demonstrate efficient non-radiative power transfer over distances of up to eight times the radius of the coils. We use this system to transfer 60W ...

  16. Targeted Technology Transfer to US Independents

    SciTech Connect (OSTI)

    E. Lance Cole

    2009-09-30

    The Petroleum Technology Transfer Council (PTTC) was established by domestic crude oil and natural gas producers, working in conjunction with the Independent Petroleum Association of America (IPAA), the U.S. Department of Energy (DOE) and selected universities, in 1994 as a national not-for-profit organization. Its goal is to transfer Exploration and Production (E&P) technology to the domestic upstream petroleum industry, in particular to the small independent operators. PTTC connects producers, technology providers and innovators, academia, and university/industry/government research and development (R&D) groups. From inception PTTC has received federal funding through DOE's oil and natural gas program managed by the National Energy Technology Laboratory (NETL). With higher funding available in its early years, PTTC was able to deliver well more than 100 workshops per year, drawing 6,000 or more attendees per year. Facing the reality of little or no federal funding in the 2006-2007 time frame, PTTC and the American Association of Petroleum Geologists (AAPG) worked together for PTTC to become a subsidiary organization of AAPG. This change brings additional organizational and financial resources to bear for PTTC's benefit. PTTC has now been 'powered by AAPG' for two full fiscal years. There is a clear sense that PTTC has stabilized and is strengthening its regional workshop and national technology transfer programs and is becoming more entrepreneurial in exploring technology transfer opportunities beyond its primary DOE contract. Quantitative accomplishments: PTTC has maintained its unique structure of a national organization working through Regional Lead Organizations (RLOs) to deliver local, affordable workshops. During the contract period PTTC consolidated from 10 to six regions efficiency and alignment with AAPG sections. The number of workshops delivered by its RLOs during the contract period is shown below. Combined attendance over the period was approximately 32,000, 70% of whom were repeat attendees. Participant feedback established that 40% of them said they had applied a technology they learned of through PTTC. Central/Eastern Gulf Univ. of Alabama, LSU Center for Energy Studies 77 Eastern West Virginia University, Illinois Geological Survey, W. Michigan Univ. 99 Midcontinent University of Kansas, University of Tulsa, Okla. Geological Survey (past) 123 Rocky Mountains Colorado School of Mines 147 Texas/SE New Mexico Bureau of Economic Geology, U. of Texas at Austin 85 West Coast Conservation Committee of California O&G Producers, Univ. So. Cal. (past) 54 At the national level HQ went from an office in Houston to a virtual office in the Tulsa, Okla. area with AAPG providing any physical assets required. There are no employees, rather several full time and several part time contractors. Since inception, PTTC has produced quarterly and mailed the 16-page Network News newsletter. It highlights new advances in technology and has a circulation of 19,000. It also produces the Tech Connections Column in The American Oil & Gas Reporter, with a circulation of 13,000. On an approximate three-week frequency, the electronic Email Tech Alert goes out to 9,000 readers. The national staff also maintains a central website with information of national interest and individual sections for each of the six regions. The national organization also provides legal and accounting services, coordinates the RLO activities, exhibits at at least major national and other meetings, supports the volunteer Board as it provides strategic direction, and is working to restore the Producer Advisory Groups to bolster the regional presence. Qualitative Value: Three qualitative factors confirm PTTC's value to the domestic O&G producing industry. First, AAPG was willing to step in and rescue PTTC, believing it was of significant interest to its domestic membership and of potential value internationally. Second, through a period of turmoil and now with participant fees dramatically increased, industry participants 'keep coming back' to wo

  17. The past and future of greenhouse gas offset projects

    SciTech Connect (OSTI)

    Trexler, M.C.; Kosloff, L.H. [Trexler and Associates, Inc., Portland, OR (United States)

    1997-12-31

    Researchers now have almost 10 years of experience with on-the-ground carbon offset projects for climate change mitigation purposes. The field is evolving from one driven primarily by public and governmental relations, to one driven by companies` perceived need to adapt to anticipated national and international regulation of greenhouse gas emissions. Offset project participants are seeking to identify offset opportunities, come up the regulatory and technical learning curves, and identify new market opportunities. Offset projects being implemented today can be evaluated through several lenses including offset performance and benefit quantification, cost-effectiveness, and political and environmental acceptability. Careful evaluation of existing offset experience is important in order to guide national and international policy development. This paper will review the history and trends of offset project development, use existing experience to identify advantages and disadvantages associated with different offsets, and identify lessons that can guide future project development. The lead author carried out the CO{sub 2} benefit analysis for the first offset project (AES Corp.`s CARE Guatemala reforestation project), and has developed and evaluated dozens of domestic and international offset projects and proposals. The authors` company is currently implementing more than a half-dozen offset projects and they are intimately involved in ongoing technical and policy development of the field.

  18. Academic Knowledge Transfer in Social Networks

    E-Print Network [OSTI]

    Slater, Mark David

    2013-01-01

    4.3 Digital Library Requirements . . . . . . . . . . . 4.43.1.1 Digital Libraries . . . . . . . . . . . .A Prototype Personal Digital Library Knowledge Transfer

  19. Waste Feed Delivery Transfer System Analysis

    SciTech Connect (OSTI)

    JULYK, L.J.

    2000-05-05

    This document provides a documented basis for the required design pressure rating and pump pressure capacity of the Hanford Site waste-transfer system in support of the waste feed delivery to the privatization contractor for vitrification. The scope of the analysis includes the 200 East Area double-shell tank waste transfer pipeline system and the associated transfer system pumps for a11 Phase 1B and Phase 2 waste transfers from AN, AP, AW, AY, and A2 Tank Farms.

  20. Project Selection - Record Keeping 

    E-Print Network [OSTI]

    Howard, Jeff W.

    2005-05-10

    4-H members have many project areas to choose from, depending on where they live. Members should consult with their parents and 4-H leaders when choosing a project. This publication outlines project considerations.

  1. International Symposium on Fusion Nuclear Technology (ISFNT-5) SAFETY ISSUES ASSOCIATED WITH MOBILIZED ACTIVATION

    E-Print Network [OSTI]

    California at Los Angeles, University of

    of the tin component. Screening Criteria The designs under development in the APEX project are at a pre project, we have developed a set of screening criteria that are used at early stages of design to identify Symposium on Fusion Nuclear Technology (ISFNT-5) A design must adequately transfer heat from plasma

  2. Submersible canned motor transfer pump

    DOE Patents [OSTI]

    Guardiani, R.F.; Pollick, R.D.; Nyilas, C.P.; Denmeade, T.J.

    1997-08-19

    A transfer pump is described which is used in a waste tank for transferring high-level radioactive liquid waste from a waste tank and having a column assembly, a canned electric motor means, and an impeller assembly with an upper impeller and a lower impeller connected to a shaft of a rotor assembly. The column assembly locates a motor housing with the electric motor means adjacent to the impeller assembly which creates an hydraulic head, and which forces the liquid waste, into the motor housing to cool the electric motor means and to cool and/or lubricate the radial and thrust bearing assemblies. Hard-on-hard bearing surfaces of the bearing assemblies and a ring assembly between the upper impeller and electric motor means grind large particles in the liquid waste flow. Slots in the static bearing member of the radial bearing assemblies further grind down the solid waste particles so that only particles smaller than the clearances in the system can pass there through, thereby resisting damage to and the interruption of the operation of the transfer pump. The column assembly is modular so that sections can be easily assembled, disassembled and/or removed. A second embodiment employs a stator jacket which provides an alternate means for cooling the electric motor means and lubricating and/or cooling the bearing assemblies, and a third embodiment employs a variable level suction device which allows liquid waste to be drawn into the transfer pump from varying and discrete levels in the waste tank. 17 figs.

  3. Enhanced heat transfer using nanofluids

    DOE Patents [OSTI]

    Choi, Stephen U. S. (Lisle, IL); Eastman, Jeffrey A. (Naperville, IL)

    2001-01-01

    This invention is directed to a method of and apparatus for enhancing heat transfer in fluids such as deionized water. ethylene glycol, or oil by dispersing nanocrystalline particles of substances such as copper, copper oxide, aluminum oxide, or the like in the fluids. Nanocrystalline particles are produced and dispersed in the fluid by heating the substance to be dispersed in a vacuum while passing a thin film of the fluid near the heated substance. The fluid is cooled to control its vapor pressure.

  4. Transferring to The University of New Mexico

    E-Print Network [OSTI]

    New Mexico, University of

    Transferring to The University of New Mexico From Central New Mexico College A Transfer Articulation Guide based on Central New Mexico Community College Catalog Year 2009 ­ 2011 Apply to UNM on-line at www.unm.edu #12;Transferring to The University of New Mexico from Central New Mexico Community College

  5. Transferring to The University of New Mexico

    E-Print Network [OSTI]

    New Mexico, University of

    Transferring to The University of New Mexico From Central New Mexico College A Transfer Articulation Guide based on Central New Mexico Community College Catalog Year 2007 ­ 2009 Apply to UNM on-line at www.unm.edu #12;Transferring to The University of New Mexico from Central New Mexico Community College

  6. Transferable Utility Planning Games Ronen I. Brafman

    E-Print Network [OSTI]

    Engel, Yagil

    Transferable Utility Planning Games Ronen I. Brafman Computer Science Dept. Ben-Gurion Univ between standard AI planning constructs and a clas- sical cooperative model of transferable-utility coalition games, we introduce the notion of transferable-utility (TU) planning games. The key

  7. Technology Transfer at Penn State University

    E-Print Network [OSTI]

    Lee, Dongwon

    Technology Transfer at Penn State University An Inventor's Guide to #12;Our mission is to protect on the University of Michigan's "Inventor's Guide to Technology Transfer," with adaptation for Penn State, and the staff of the UM Office of Technology Transfer for their kind permission to use their excellent material

  8. Page 1 of 2 Technology Transfer &

    E-Print Network [OSTI]

    Chapman, Michael S.

    Page 1 of 2 Technology Transfer & Business Development Incoming Material Transfer Request Form & Academic Collaborations Team (iACT) Technology Transfer & Business Development MTA@ohsu.edu (503) 494 the provider? No Yes If yes, please attach a copy to your MTA submission email. #12;Page 2 of 2 Technology

  9. Requirements Engineering Technology Transfer: An Experience Report

    E-Print Network [OSTI]

    Leite, Julio Cesar Sampaio do Prado

    Requirements Engineering Technology Transfer: An Experience Report Francisco A. C. Pinheiro1 Julio of software engineering technology transfer was identified by Pfleeger (1999). She came to the con- clusion Journal of Technology Transfer, 28, 159­165, 2003 ©2003 Kluwer Academic Publishers. Manufactured

  10. Data Transfer Policy Version 1.1

    E-Print Network [OSTI]

    Aickelin, Uwe

    Data Transfer Policy Version 1.1 Last amended: 18 September 2014 Policy Owner: Governance Team The University of Nottingham ("the University") Tri-Campus Data Transfer Policy Background and Statement of Intention The University is required at times to transfer personal data between its campuses in Nottingham

  11. Code Number :.............. HEAT TRANSFER QUALIFYING EXAM

    E-Print Network [OSTI]

    Feeny, Brian

    is at 40 °C, estimate the heat transfer per unit length by radiation and convection between the twoCode Number :.............. HEAT TRANSFER QUALIFYING EXAM January 2010 OPEN BOOK (only one book) The heat transfer coefficient c) The length of pipe needed for a 35 °C increase in mean temperature d

  12. Alterna(ve Roadmap For Transfer Students

    E-Print Network [OSTI]

    Ravikumar, B.

    Alterna(ve Roadmap For Transfer Students 8/11/14 EE Program #12;Transfer with the roadmap · NEXT STEP: ­ Share this with all other transfer students and make 1 (LACKING ES220) SEE THE ROADMAP: h`p://www.sonoma.edu/engineering/bsee/bsee_roadmap

  13. ME 519: THEORY OF HEAT TRANSFER Instructor

    E-Print Network [OSTI]

    Lin, Xi

    ME 519: THEORY OF HEAT TRANSFER Fall 2014 Instructor: Class time: Classroom: Office Hours: Prof Tuesday 4­5pm or by appointment Class description This course will cover the fundamentals of heat transfer. An introductory course in heat transfer (ME 419 or equivalent) is pre-requisite. Grading 20% Homework 25% Exam 1

  14. Export Controls and International Safeguards: Strengthening Nonproliferation through Interdisciplinary Integration

    SciTech Connect (OSTI)

    Peterson, Danielle J.; Goorevich, Richard; Hooper, Rich; Scheinman, Lawrence; Tape, James W.

    2008-11-03

    International safeguards and export controls are central to ensuring international confidence in the peaceful uses of nuclear materials and technologies and to achieving adequate oversight on the transfer and use of nuclear materials, technology, and equipment required for the development of proliferation-sensitive parts of the nuclear fuel cycle. Although the independent strengths of international safeguards and export controls rely largely on universal adherence, there may be opportunities to exploit the shared strengths of these systems. This article provides background information on the separate evolution of export controls and international safeguards, considers how these two elements of the nonproliferation regime interact, and identifies some possible avenues that could, over time, lead to wholly integrated activities.

  15. Radiative Heat Transfer in Enhanced Hydrogen Outgassing of Glass

    E-Print Network [OSTI]

    Kitamura, Rei; Pilon, Laurent

    2009-01-01

    and J.R. Howell, Thermal radiation heat transfer, Hemispheremade: 1. The heat, mass, and radiation transfer are treatedOne- dimensional heat, mass, and radiation transfers were

  16. Radiative Heat Transfer in Enhanced Hydrogen Outgassing of Glass

    E-Print Network [OSTI]

    Kitamura, Rei; Pilon, Laurent

    2009-01-01

    Kaviany and B.P. Singh, “Radiative heat transfer in porousmedia”, Advances in Heat Transfer, vol. 23, no. 23, pp. 133–Thermal radiation heat transfer, Hemisphere Publishing Co. ,

  17. Heat transfer via dropwise condensation on hydrophobic microstructured surfaces

    E-Print Network [OSTI]

    Ruleman, Karlen E. (Karlen Elizabeth)

    2009-01-01

    Dropwise condensation has the potential to greatly increase heat transfer rates. Heat transfer coefficients by dropwise condensation and film condensation on microstructured silicon chips were compared. Heat transfer ...

  18. International Border Management Systems (IBMS) Program : visions and strategies.

    SciTech Connect (OSTI)

    McDaniel, Michael; Mohagheghi, Amir Hossein

    2011-02-01

    Sandia National Laboratories (SNL), International Border Management Systems (IBMS) Program is working to establish a long-term border security strategy with United States Central Command (CENTCOM). Efforts are being made to synthesize border security capabilities and technologies maintained at the Laboratories, and coordinate with subject matter expertise from both the New Mexico and California offices. The vision for SNL is to provide science and technology support for international projects and engagements on border security.

  19. Clean Coal Projects (Virginia)

    Broader source: Energy.gov [DOE]

    This legislation directs the Virginia Air Pollution Control Board to facilitate the construction and implementation of clean coal projects by expediting the permitting process for such projects.

  20. 2016 Technology Innovation Projects

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Projects FY 2016 Technology Innovation Project Briefs Demand Response TIP 292: Advanced Heat Pump Water Heater Research TIP 336: Scaled Deployment and Demonstration of Demand...

  1. Contract/Project Management

    Office of Environmental Management (EM)

    Contract and Project Management Performance Metrics and Targets 1 ContractProject Management Primary Performance Metrics FY 2011 Target FY 2011 Actual & Forecast FY 2011...

  2. Contract/Project Management

    Office of Environmental Management (EM)

    and Project Management Improvement Performance Metrics and Targets 1 ContractProject Management Primary Performance Metrics FY 2011 Target FY 2011 Forecast FY 2011 Pre- &...

  3. Contract/Project Management

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Contract and Project Management Performance Metrics and Targets 1 ContractProject Management Primary Performance Metrics FY 2010 Target FY 2010 Actual FY 2010 Pre- &...

  4. Contract/Project Management

    Broader source: Energy.gov (indexed) [DOE]

    Contract and Project Management Performance Metrics and Targets 1 ContractProject Management Primary Performance Metrics FY 2010 Target FY 2010 Forecast FY 2010 Pre- &...

  5. Contract/Project Management

    Energy Savers [EERE]

    and Project Management Improvement Performance Metrics and Targets 1 ContractProject Management Performance Metric FY 2012 Target FY 2012 Forecast FY 2012 Pre- & Post-CAP...

  6. Contract/Project Management

    Broader source: Energy.gov (indexed) [DOE]

    and Project Management Improvement Performance Metrics and Targets 1 ContractProject Management Performance Metric FY 2012 Target FY 2012 Final FY 2012 Pre- & Post-CAP Final...

  7. Contract/Project Management

    Broader source: Energy.gov (indexed) [DOE]

    2 nd Quarter Overall Contract and Project Management Performance Metrics and Targets ContractProject Management Performance Metrics FY 2009 Target FY 2009 Actual Comment 1....

  8. Contract/Project Management

    Office of Environmental Management (EM)

    1 st Quarter Overall Contract and Project Management Performance Metrics and Targets ContractProject Management Performance Metrics FY 2009 Target FY 2009 Actual Comment 1....

  9. Contract/Project Management

    Office of Environmental Management (EM)

    3 rd Quarter Overall Contract and Project Management Performance Metrics and Targets ContractProject Management Performance Metrics FY 2009 Target FY 2009 Actual Comment 1....

  10. Contract/Project Management

    Energy Savers [EERE]

    Third Quarter Overall Contract and Project Management Improvement Performance Metrics and Targets 1 ContractProject Management Performance Metric FY 2012 Target FY 2012 Forecast...

  11. Project 1640 Palomar Procedures

    E-Print Network [OSTI]

    Project 1640 Palomar Procedures Version 0.1 7/7/08 2:11:08 PM #12;2 Project 1640 Design..................................................................................................................... 1 Palomar Procedures

  12. Project Finance and Investments

    Broader source: Energy.gov [DOE]

    Plenary III: Project Finance and Investment Project Finance and Investments Chris Cassidy, National Business Renewable Energy Advisor, U.S. Department of Agriculture

  13. Falls Creek Hydroelectric Project

    SciTech Connect (OSTI)

    Gustavus Electric Company; Richard Levitt; DOE Project Officer - Keith Bennett

    2007-06-12

    This project was for planning and construction of a 700kW hydropower project on the Fall River near Gustavus, Alaska.

  14. A meshless method for modeling convective heat transfer

    SciTech Connect (OSTI)

    Carrington, David B

    2010-01-01

    A meshless method is used in a projection-based approach to solve the primitive equations for fluid flow with heat transfer. The method is easy to implement in a MATLAB format. Radial basis functions are used to solve two benchmark test cases: natural convection in a square enclosure and flow with forced convection over a backward facing step. The results are compared with two popular and widely used commercial codes: COMSOL, a finite element model, and FLUENT, a finite volume-based model.

  15. Sustainable Development Summer Intern Report 2013 Sustainable Development Summer Intern

    E-Print Network [OSTI]

    Sustainable Development Summer Intern Report 2013 Sustainable Development Summer Intern Final amongst university's invested in sustainable development. Our small but mighty size allows us to build through positive sustainable practices. As the Sustainable Development Summer Intern I am fortunate enough

  16. Sustainable Development Summer Intern Report 2010 Sustainable Development Summer Intern

    E-Print Network [OSTI]

    Sustainable Development Summer Intern Report 2010 1 Sustainable Development Summer Intern Final of Bishop's University. The role of the Sustainable Development Summer Intern (SDSI) is to coordinate and organize sustainable development information and activities during the summer months. Ensuring

  17. PEFC Uruguay Seeks International Recognition JUL 26 2010 | INTERNATIONAL

    E-Print Network [OSTI]

    PEFC Uruguay Seeks International Recognition JUL 26 2010 | INTERNATIONAL Uruguay has become the latest Latin American country to submit its national forest certification scheme for PEFC endorsement Ben Gunneberg, PEFC International Secretary General."The current assessment analyses the compliance

  18. A SYSTEM DYNAMIC APPROACH FOR SIMULATION OF EXPERIENCE TRANSFER IN THE AEC INDUSTRY

    E-Print Network [OSTI]

    Stanford University

    to the early design stage, has significant benefits and increases the life cycle profit in the AEC industry that improve transferring of knowledge and learning in an Architecture, Engineering and Construction (AEC process into manageable pieces. Based on prior surveys, the known experiences and costs at the project

  19. Investigation of heat transfer and combustion in the advanced fluidized bed combustor (FBC)

    SciTech Connect (OSTI)

    Dr. Seong W. Lee

    1998-10-01

    The objective of this project is to predict the heat transfer and combustion performance in newly-designed fluidized bed combustor (FBC) and to provide the design guide lines and innovative concept for small-scale boiler and furnace. The major accomplishments are summarized.

  20. Heat Transfer Research, 2010, Vol. 41, No. 6 Turbine Aero-Heat Transfer Studies

    E-Print Network [OSTI]

    Camci, Cengiz

    AU TH O R PR O O F Heat Transfer Research, 2010, Vol. 41, No. 6 Turbine Aero-Heat Transfer Studies in Rotating Research Facilities CENGIZ CAMCI Turbomachinery Aero-Heat Transfer Laboratory, Department The present paper deals with the experimental aero-heat transfer studies performed in rotating turbine