Sample records for interior storm windows

  1. Characterization of Energy Savings and Thermal Comfort Improvements Derived from Using Interior Storm Windows

    SciTech Connect (OSTI)

    Knox, Jake R.; Widder, Sarah H.

    2013-09-30T23:59:59.000Z

    This field study of a single historic home in Seattle, WA documents the performance of Indow Windows’s interior storm window inserts. Energy use and the temperature profile of the house were monitored before and after the installation of the window inserts and changes in the two recorded metrics were examined. Using the defined analysis approach, it was determined that the interior storm windows produced a 22% reduction of the HVAC energy bill and had an undetermined effect on the thermal comfort in the house. Although there was no measurable changes in the thermal comfort of the house, the occupant noted the house to be “warmer in the winter and cooler in the summer” and that the “temperatures are more even (throughout the house).” The interior storm windows were found to be not cost effective, largely due to the retrofits completed on its heating system. However, if the economic analysis was conducted based on the old heating system, a 72% efficient oil fired furnace, the Indow Windows proved to be economical and had a simple payback period of 9.0 years.

  2. Evaluation of Low-E Storm Windows in the PNNL Lab Homes

    SciTech Connect (OSTI)

    Knox, Jake R.; Widder, Sarah H.

    2014-05-31T23:59:59.000Z

    This study examines the performance of exterior and interior low-e storm panels with a controlled whole home experimental design using PNNL's Lab Homes. Summing the estimated annual average heating and cooling savings, the installation of low-e storm panels resulted in approximately 10% annual energy savings. The results of the experiment will be used to determine and validate performance of low-e storm windows over double pane clear glass windows in a whole home setting.

  3. Storm Windows | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy UsageAUDITVehicles »ExchangeDepartmentResolveFuture |Energy Steps toStorageStorm

  4. Building America's Low-e Storm Window Adoption Program Plan (FY2014)

    SciTech Connect (OSTI)

    Cort, Katherine A.

    2013-12-23T23:59:59.000Z

    Low emissivity (low-e) storm windows/panels appear to hold promise for effectively reducing existing home heating, ventilation, and air-conditioning (HVAC) consumption. Due to the affordability of low-e storm windows and the large numbers of existing homes that have low-performing single-pane or double-pane clear windows, a tremendous opportunity exists to provide energy savings by transforming the low-e storm window market and increasing market adoption. This report outlines U.S. Department of Energy (DOE) Building America’s planned market transformation activities in support of low-e storm window adoption during fiscal year (FY) 2014.

  5. Building America Webinar: Low-E Storms: The Next Big Thing in Window Retrofits

    Broader source: Energy.gov [DOE]

    This Building America webinar presented a new and improved low-e storm window that boasts a combination of curb appeal and energy efficiency, all for a fraction of the cost of window replacement, on Sept. 9, 2014.

  6. Text-Alternative Version of Building America Webinar: Low-e Storms: The Next "Big Thing" in Window Retrofits

    Broader source: Energy.gov [DOE]

    Low-e Storms:  The Next “Big Thing” in Window RetrofitsOfficial Webinar Transcript (September 9, 2014)

  7. Low-e Storm Windows: Market Assessment and Pathways to Market Transformation

    SciTech Connect (OSTI)

    Cort, Katherine A.

    2013-06-08T23:59:59.000Z

    Field studies sponsored by the U.S. Department of Energy (DOE) have shown that the use of low-e storm windows can lead to significant heating and cooling energy savings in residential homes. This study examines the market for low-e storm windows based on market data, case studies, and recent experience with weatherization deployment programs. It uses information from interviews conducted with DOE researchers and industry partners involved in case studies and early deployment efforts related to low-e storm windows. In addition, this study examines potential barriers to market acceptance, assesses the market and energy savings potential, and identifies opportunities to transform the market for low-e storm windows and overcome market adoption barriers.

  8. Database of Low-e Storm Window Energy Performance across U.S. Climate Zones

    SciTech Connect (OSTI)

    Culp, Thomas D.; Cort, Katherine A.

    2014-09-04T23:59:59.000Z

    This is an update of a report that describes process, assumptions, and modeling results produced Create a Database of U.S. Climate-Based Analysis for Low-E Storm Windows. The scope of the overall effort is to develop a database of energy savings and cost effectiveness of low-E storm windows in residential homes across a broad range of U.S. climates using the National Energy Audit Tool (NEAT) and RESFEN model calculations. This report includes a summary of the results, NEAT and RESFEN background, methodology, and input assumptions, and an appendix with detailed results and assumptions by cliamte zone.

  9. Database of Low-E Storm Window Energy Performance across U.S. Climate Zones (Task ET-WIN-PNNL-FY13-01_5.3)

    SciTech Connect (OSTI)

    Cort, Katherine A.; Culp, Thomas D.

    2013-09-01T23:59:59.000Z

    This report describes process, assumptions, and modeling results produced in support of the Emerging Technologies Low-e Storm Windows Task 5.3: Create a Database of U.S. Climate-Based Analysis for Low-E Storm Windows. The scope of the overall effort is to develop a database of energy savings and cost effectiveness of low-E storm windows in residential homes across a broad range of U.S. climates using the National Energy Audit Tool (NEAT) and RESFEN model calculations. This report includes a summary of the results, NEAT and RESFEN background, methodology, and input assumptions, and an appendix with detailed results and assumptions by cliamte zone. Both sets of calculation results will be made publicly available through the Building America Solution Center.

  10. Building America Webinar: Low-E Storms: The Next Big Thing in Window Retrofits

    Broader source: Energy.gov [DOE]

    Until recently, energy-efficient window retrofit options have largely been limited to repair or replacement; leaving the homeowner to decide between affordability and deeper energy savings.  A new...

  11. Key word:Daylight Factor Window Wall Ratio Pendentive dome Lighting design Tropical region Architecture and Interior design

    E-Print Network [OSTI]

    Mehrdad Mazloomi

    Abstract: Daylighting design plays important role in architecture of religious buildings such as churches and mosques where pendentive dome construction is frequently used. In daylighting design, many designers face difficulty in estimating the interior share of light which is usually expressed by daylight factor due to complexity of interior form. This study aims to provide designers with a rather high precision rule of thumb for average daylight factor in pendentive dome building. Thus, it investigates the Daylight Factor [DF] distribution of such buildings with reference to the tropics. It takes the Window Wall Ratio [WWR] into account and seeks its influence on daylight factor. By a 12 X 12 points grid, it examines five different ratios including 0.1, 0.2, 0.3, 0.4 and 0.5 on DF of the floor beneath the dome. The results endorse the direct relation of WWR and DF. The least WWR equal to 0.1 yields an average DF of 0.55 % while the greatest WWR of 0.5 yields in average DF of 2.56%. The intermediate WWR in steps of 0.2, 0.3 and 0.4 correspond to 1.04, 1.56 and 2.07 percent respectively. As a relatively precise rule of thumb, any increment in consequent steps of WWR with 0.1 intervals results in 0.5 % increase in DF. This can be employed by architects and interior designers for lighting design of pendentive dome buildings in tropical region.

  12. Modeling Windows in Energy Plus with Simple Performance Indices

    E-Print Network [OSTI]

    Arasteh, Dariush

    2010-01-01T23:59:59.000Z

    that window U-factors include the interior and exterior filmwindows however, Steps 1 and 5 which use interior filmthese film coefficients to a resistance for the solid window

  13. MEASURED WINTER PERFORMANCE OF STORM WINDOWS

    E-Print Network [OSTI]

    problem. From existing data (U. S. Department of Energy 2002) one can estimate that 90% of the present payback of energy savings. Certainly, given the present spectrum of available products, it is difficult. Interestingly, solar heat gain was not negligible, even in north-facing orientation. Introduction Over the past

  14. Storm Water Analytical Period

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Storm Water Analytical Period Storm Water Analytical Period The Individual Permit authorizes the discharge of storm water associated with historical industrial activities at LANL...

  15. Window shopping

    SciTech Connect (OSTI)

    Best, D.

    1990-03-01T23:59:59.000Z

    The author addresses the energy efficiency of windows and describes changes and new products available in this consumer information article. Experiments currently being done by Lawrence Berkeley Laboratory (LBL), Bonneville Power Authority and the Washington State Energy Office show that some of these superwindows collect more energy from the sun than they let escape from inside the home. One type of window in current production is the low-E (low-emissivity) and the IGUs (insulated glass units). Low-E techniques include glazing of the glass with various materials including polyester and metallic coatings. Other measures include filling the airspace in double pane windows with argon, aerogel or by creating a vacuum in the airspace. Another factor the author considers is ultraviolet light protection.

  16. Advancement of Electrochromic Windows

    E-Print Network [OSTI]

    2006-01-01T23:59:59.000Z

    Guide for Early-Market Electrochromic Windows. LBNL-59950.Guide for Early-Market Electrochromic Windows Attachment 17:electrochromic prototype windows that were deemed sufficiently mature for market

  17. Zero Energy Windows

    E-Print Network [OSTI]

    Arasteh, Dariush; Selkowitz, Steve; Apte, Josh; LaFrance, Marc

    2006-01-01T23:59:59.000Z

    Energy Performance of Electrochromic Windows Controlled for2006). Advancement of Electrochromic Windows, CaliforniaSavings Potential of Electrochromic Windows in the U.S.

  18. STORM WATER Residential

    E-Print Network [OSTI]

    California at Santa Cruz, University of

    STORM WATER QUALITY HOTLINE UCSC Residential Car Washing http THAT MAY CAUSE ENVIRONMENTAL HARM TO THE STORM WATER QUALITY HOTLINE: (831) 459-2553. LIKE US ON FACEBOOK AT UCSC STORM WATER MANAGEMENT PROGRAM! DID YOU KNOW? PRACTICAL SOLUTIONS > USE A COMMERCIAL CAR WASH

  19. Residential Windows and Window Coverings: A Detailed View of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Residential Windows and Window Coverings: A Detailed View of the Installed Base and User Behavior Residential Windows and Window Coverings: A Detailed View of the Installed Base...

  20. Advancement of Electrochromic Windows

    E-Print Network [OSTI]

    2006-01-01T23:59:59.000Z

    of a thin-film ceramic electrochromic window: Field studyof a Thin-Film Ceramic Electrochromic Window: Field StudyEC window product characteristics The EC is a thin-film WO3-

  1. Advancement of Electrochromic Windows

    E-Print Network [OSTI]

    2006-01-01T23:59:59.000Z

    Guide for Early-Market Electrochromic Windows. LBNL-59950.Granqvist, C.G. 2000. "Electrochromic Tungsten Oxide Films:the performance of the electrochromic windows. Proceedings

  2. Storm Water Individual Permit.

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    information meeting to discuss the biannual update on the NPDES Storm Water Individual Permit. Wednesday, January 22, 2014 5:30 p.m. Cities of Gold Conference Center 10 Cities of...

  3. Movable insulation. A guide to reducing heating and cooling losses through the windows in your home

    SciTech Connect (OSTI)

    Langdon, W.K.

    1980-01-01T23:59:59.000Z

    A typical house loses 25 to 30% of its heat through windows, and a house with large windows may lose as much as 50%. Numerous movable-insulation systems that will cut the heat loss through windows in half are described. Chapters are: The Energy-Responsive Dwelling, Past to Present; Window Heat Losses and Gains; Enhanced Glazing Systems; Choosing a Window-Insulation Design for Your Home; Pop-In Shutters; Thermal Curtains - Blankets that Fold; Thermal Shades - Blankets that Roll; Thermal Shutters and Folding Screens; Insulation Between Glazing and Interior Louvers; Exterior Hinged and Sliding Shutters; Sun-Shading Screens; Exterior Roll Shutters; Shutters for Skylights; Shutters for Clerestory Windows; Interior Greenhouse Insulation Systems; Exterior Insulation for Greenhouses; Movable Insulation to Assist Passive Space Heating; and Movable Insulation to Assist Solar Water Heaters. Appendices include the following: insulated shade and shutter construction; the economics of window insulation; movable insulation products, hardware, and components; further technical information; and design sources. (MCW)

  4. Design of intelligent interiors

    E-Print Network [OSTI]

    Bonanni, Leonardo Amerigo, 1977-

    2005-01-01T23:59:59.000Z

    Ubiquitous computing is transforming interior design by allowing utilities, goods and information to be delivered where and when we need them. How will new information technologies impact the design of interior spaces? ...

  5. 1 Interior Architecture and Design INTERIOR ARCHITECTURE AND

    E-Print Network [OSTI]

    Vertes, Akos

    1 Interior Architecture and Design INTERIOR ARCHITECTURE AND DESIGN GW's interior architecture. UNDERGRADUATE Bachelor's program · Bachelor of Fine Arts with a major in interior architecture and design (http://bulletin.gwu.edu/arts-sciences/interior- architecture-design/bfa) GRADUATE Master's program · Master of Fine Arts in the field of interior architecture

  6. Individual Permit for Storm Water

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Compliance Miscellaneous EPA Submittals Public Meetings Renewal Application Construction Certifications Corrective Action Storm Water Analytical Period Get updates on LANL...

  7. Efficient Windows Collaborative

    SciTech Connect (OSTI)

    Nils Petermann

    2010-02-28T23:59:59.000Z

    The project goals covered both the residential and commercial windows markets and involved a range of audiences such as window manufacturers, builders, homeowners, design professionals, utilities, and public agencies. Essential goals included: (1) Creation of 'Master Toolkits' of information that integrate diverse tools, rating systems, and incentive programs, customized for key audiences such as window manufacturers, design professionals, and utility programs. (2) Delivery of education and outreach programs to multiple audiences through conference presentations, publication of articles for builders and other industry professionals, and targeted dissemination of efficient window curricula to professionals and students. (3) Design and implementation of mechanisms to encourage and track sales of more efficient products through the existing Window Products Database as an incentive for manufacturers to improve products and participate in programs such as NFRC and ENERGY STAR. (4) Development of utility incentive programs to promote more efficient residential and commercial windows. Partnership with regional and local entities on the development of programs and customized information to move the market toward the highest performing products. An overarching project goal was to ensure that different audiences adopt and use the developed information, design and promotion tools and thus increase the market penetration of energy efficient fenestration products. In particular, a crucial success criterion was to move gas and electric utilities to increase the promotion of energy efficient windows through demand side management programs as an important step toward increasing the market share of energy efficient windows.

  8. Interior intrusion detection systems

    SciTech Connect (OSTI)

    Rodriguez, J.R.; Matter, J.C. (Sandia National Labs., Albuquerque, NM (United States)); Dry, B. (BE, Inc., Barnwell, SC (United States))

    1991-10-01T23:59:59.000Z

    The purpose of this NUREG is to present technical information that should be useful to NRC licensees in designing interior intrusion detection systems. Interior intrusion sensors are discussed according to their primary application: boundary-penetration detection, volumetric detection, and point protection. Information necessary for implementation of an effective interior intrusion detection system is presented, including principles of operation, performance characteristics and guidelines for design, procurement, installation, testing, and maintenance. A glossary of sensor data terms is included. 36 figs., 6 tabs.

  9. Windows technology assessment

    SciTech Connect (OSTI)

    Baron, J.J.

    1995-10-01T23:59:59.000Z

    This assessment estimates that energy loss through windows is approximately 15 percent of all the energy used for space heating and cooling in residential and commercial buildings in New York State. The rule of thumb for the nation as a whole is about 25 percent. The difference may reflect a traditional assumption of single-pane windows while this assessment analyzed installed window types in the region. Based on the often-quoted assumption, in the United States some 3.5 quadrillion British thermal units (Btu) of primary energy, costing some $20 billion, is annually consumed as a result of energy lost through windows. According to this assessment, in New York State, the energy lost due to heat loss through windows is approximately 80 trillion Btu at an annual cost of approximately $1 billion.

  10. Optically measuring interior cavities

    DOE Patents [OSTI]

    Stone, Gary Franklin (Livermore, CA)

    2008-12-21T23:59:59.000Z

    A method of measuring the three-dimensional volume or perimeter shape of an interior cavity includes the steps of collecting a first optical slice of data that represents a partial volume or perimeter shape of the interior cavity, collecting additional optical slices of data that represents a partial volume or perimeter shape of the interior cavity, and combining the first optical slice of data and the additional optical slices of data to calculate of the three-dimensional volume or perimeter shape of the interior cavity.

  11. Zero Energy Windows

    SciTech Connect (OSTI)

    Arasteh, Dariush; Selkowitz, Steve; Apte, Josh; LaFrance, Marc

    2006-05-17T23:59:59.000Z

    Windows in the U.S. consume 30 percent of building heating and cooling energy, representing an annual impact of 4.1 quadrillion BTU (quads) of primary energy. Windows have an even larger impact on peak energy demand and on occupant comfort. An additional 1 quad of lighting energy could be saved if buildings employed effective daylighting strategies. The ENERGY STAR{reg_sign} program has made standard windows significantly more efficient. However, even if all windows in the stock were replaced with today's efficient products, window energy consumption would still be approximately 2 quads. However, windows can be ''net energy gainers'' or ''zero-energy'' products. Highly insulating products in heating applications can admit more useful solar gain than the conductive energy lost through them. Dynamic glazings can modulate solar gains to minimize cooling energy needs and, in commercial buildings, allow daylighting to offset lighting requirements. The needed solutions vary with building type and climate. Developing this next generation of zero-energy windows will provide products for both existing buildings undergoing window replacements and products which are expected to be contributors to zero-energy buildings. This paper defines the requirements for zero-energy windows. The technical potentials in terms of national energy savings and the research and development (R&D) status of the following technologies are presented: (1) Highly insulating systems with U-factors of 0.1 Btu/hr-ft{sup 2}-F; (2) Dynamic windows: glazings that modulate transmittance (i.e., change from clear to tinted and/or reflective) in response to climate conditions; and (3) Integrated facades for commercial buildings to control/ redirect daylight. Market transformation policies to promote these technologies as they emerge into the marketplace are then described.

  12. Ice Storm Supercomputer

    ScienceCinema (OSTI)

    None

    2013-05-28T23:59:59.000Z

    "A new Idaho National Laboratory supercomputer is helping scientists create more realistic simulations of nuclear fuel. Dubbed 'Ice Storm,' this 2048-processor machine allows researchers to model and predict the complex physics behind nuclear reactor behavior. And with a new visualization lab, the team can see the results of its simulations on the big screen." For more information about INL research, visit http://www.facebook.com/idahonationallaboratory.

  13. The Efficient Windows Collaborative

    SciTech Connect (OSTI)

    Petermann, Nils

    2006-03-31T23:59:59.000Z

    The Efficient Windows Collaborative (EWC) is a coalition of manufacturers, component suppliers, government agencies, research institutions, and others who partner to expand the market for energy efficient window products. Funded through a cooperative agreement with the U.S. Department of Energy, the EWC provides education, communication and outreach in order to transform the residential window market to 70% energy efficient products by 2005. Implementation of the EWC is managed by the Alliance to Save Energy, with support from the University of Minnesota and Lawrence Berkeley National Laboratory.

  14. Report Concerns: Storm Water Quality Hotline

    E-Print Network [OSTI]

    California at Santa Cruz, University of

    into storm drains, or suspicious activi- ties that may cause environmental harm to the Storm Water Quality was created for the Storm Water Management Program http://cleanwater.ucsc.edu Contact us at: cleanwater Management Program and UCSC Storm Water Management Plan at cleanwater.ucsc.edu Storm Water Management: 1

  15. Report Concerns: Storm Water Quality Hotline

    E-Print Network [OSTI]

    California at Santa Cruz, University of

    by Joanne Yee, Storm Water Management Program Intern for the UCSC Storm Water Management Program. Like us on Facebook at UCSC Storm Water Management Program Contact us at: cleanwater@ucsc.edu (831) 459, Volume 5, Number 1 Learn more about the UCSC Storm Water Management Program and UCSC Storm Water

  16. Report Concerns: Storm Water Quality Hotline

    E-Print Network [OSTI]

    California at Santa Cruz, University of

    by Joanne Yee, Storm Water Management Program Intern for the UCSC Storm Water Management Program. Like us on Facebook at UC Santa Cruz Storm Water Management Program Contact us at: cleanwater@ucsc.edu (831) 459, Volume 5, Number 1 Learn more about the UCSC Storm Water Management Program and UCSC Storm Water

  17. Subject Responses to Electrochromic Windows

    E-Print Network [OSTI]

    Clear, Robert; Inkarojrit, Vorapat; Lee, Eleanor

    2006-01-01T23:59:59.000Z

    Visual quality assessment of electrochromic and conventionalissues for large-area electrochromic windows in commercialOffice worker preferences of electrochromic windows: a pilot

  18. Storm Water Discharge Permits (Wisconsin)

    Broader source: Energy.gov [DOE]

    Wisconsin's storm water runoff regulations include permitting requirements for construction sites and industrial facilities, including those processing or extracting coal or gas. The purpose of the...

  19. CH7 Windows Introduction

    E-Print Network [OSTI]

    Collette. Sébastien

    4 Server · Account lockout security ­ Protection contre les attaques sur les mots de passe Windows NT 4 Server · Account lockout security ­ Protection contre les attaques sur les mots de passe

  20. Superconducting radiofrequency window assembly

    DOE Patents [OSTI]

    Phillips, H.L.; Elliott, T.S.

    1997-03-11T23:59:59.000Z

    The present invention is a superconducting radiofrequency window assembly for use in an electron beam accelerator. The srf window assembly has a superconducting metal-ceramic design. The srf window assembly comprises a superconducting frame, a ceramic plate having a superconducting metallized area, and a superconducting eyelet for sealing plate into frame. The plate is brazed to eyelet which is then electron beam welded to frame. A method for providing a ceramic object mounted in a metal member to withstand cryogenic temperatures is also provided. The method involves a new metallization process for coating a selected area of a ceramic object with a thin film of a superconducting material. Finally, a method for assembling an electron beam accelerator cavity utilizing the srf window assembly is provided. The procedure is carried out within an ultra clean room to minimize exposure to particulates which adversely affect the performance of the cavity within the electron beam accelerator. 11 figs.

  1. Superconductive radiofrequency window assembly

    DOE Patents [OSTI]

    Phillips, H.L.; Elliott, T.S.

    1998-05-19T23:59:59.000Z

    The present invention is a superconducting radiofrequency window assembly for use in an electron beam accelerator. The SRF window assembly has a superconducting metal-ceramic design. The SRF window assembly comprises a superconducting frame, a ceramic plate having a superconducting metallized area, and a superconducting eyelet for sealing plate into frame. The plate is brazed to eyelet which is then electron beam welded to frame. A method for providing a ceramic object mounted in a metal member to withstand cryogenic temperatures is also provided. The method involves a new metallization process for coating a selected area of a ceramic object with a thin film of a superconducting material. Finally, a method for assembling an electron beam accelerator cavity utilizing the SRF window assembly is provided. The procedure is carried out within an ultra clean room to minimize exposure to particulates which adversely affect the performance of the cavity within the electron beam accelerator. 11 figs.

  2. ARM - Word Seek: Storms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc Documentation RUCProductstwrmrAre the Effects of Global Warming? OutreachStorms Outreach Home

  3. High Performance Window Retrofit

    SciTech Connect (OSTI)

    Shrestha, Som S [ORNL; Hun, Diana E [ORNL; Desjarlais, Andre Omer [ORNL

    2013-12-01T23:59:59.000Z

    The US Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy (EERE) and Traco partnered to develop high-performance windows for commercial building that are cost-effective. The main performance requirement for these windows was that they needed to have an R-value of at least 5 ft2 F h/Btu. This project seeks to quantify the potential energy savings from installing these windows in commercial buildings that are at least 20 years old. To this end, we are conducting evaluations at a two-story test facility that is representative of a commercial building from the 1980s, and are gathering measurements on the performance of its windows before and after double-pane, clear-glazed units are upgraded with R5 windows. Additionally, we will use these data to calibrate EnergyPlus models that we will allow us to extrapolate results to other climates. Findings from this project will provide empirical data on the benefits from high-performance windows, which will help promote their adoption in new and existing commercial buildings. This report describes the experimental setup, and includes some of the field and simulation results.

  4. Overview of the Storm Water Individual Permit.pdf

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the LANL Storm Water Individual Permit? Poster, Individual Permit for Storm Water, NPDES Permit No...

  5. Adaptive Liquid Crystal Windows

    SciTech Connect (OSTI)

    Taheri, Bahman; Bodnar, Volodymyr

    2011-12-31T23:59:59.000Z

    Energy consumption by private and commercial sectors in the U.S. has steadily grown over the last decade. The uncertainty in future availability of imported oil, on which the energy consumption relies strongly, resulted in a dramatic increase in the cost of energy. About 20% of this consumption are used to heat and cool houses and commercial buildings. To reduce dependence on the foreign oil and cut down emission of greenhouse gases, it is necessary to eliminate losses and reduce total energy consumption by buildings. To achieve this goal it is necessary to redefine the role of the conventional windows. At a minimum, windows should stop being a source for energy loss. Ideally, windows should become a source of energy, providing net gain to reduce energy used to heat and cool homes. It is possible to have a net energy gain from a window if its light transmission can be dynamically altered, ideally electronically without the need of operator assistance, providing optimal control of the solar gain that varies with season and climate in the U.S. In addition, the window must not require power from the building for operation. Resolution of this problem is a societal challenge and of national interest and will have a broad global impact. For this purpose, the year-round, allclimate window solution to provide an electronically variable solar heat gain coefficient (SHGC) with a wide dynamic range is needed. AlphaMicron, Inc. (AMI) developed and manufactured 1ft × 1ft prototype panels for the world’s first auto-adjusting Adaptive Liquid Crystal Windows (ALCWs) that can operate from sunlight without the need for external power source and demonstrate an electronically adjustable SHGC. This novel windows are based on AlphaMicron’s patented e-Tint® technology, a guesthost liquid crystal system implemented on flexible, optically clear plastic films. This technology is suitable both for OEM and aftermarket (retro-fitting) lamination to new and existing windows. Low level of power consumption by ALCWs allows for on-board power electronics for automatic matching of transmission through windows to varying climate conditions without drawing the power from the power grid. ALCWs are capable of transmitting more sunlight in winters to assist in heating and less sunlight in summers to minimize overheating. As such, they can change the window from being a source of energy loss to a source of energy gain. In addition, the scalable AMI’s roll-to-roll process, proved by making 1ft × 1ftALCW prototype panels, allows for cost-effective production of large-scale window panels along with capability to change easily their color and shape. In addition to architectural glazing in houses and commercial buildings, ALCWs can be used in other applications where control of sunlight is needed, such as green houses, used by commercial produce growers and botanical gardens, cars, aircrafts, etc.

  6. The energy-savings potential of electrochromic windows in the UScommercial buildings sector

    SciTech Connect (OSTI)

    Lee, Eleanor; Yazdanian, Mehry; Selkowitz, Stephen

    2004-04-30T23:59:59.000Z

    Switchable electrochromic (EC) windows have been projected to significantly reduce the energy use of buildings nationwide. This study quantifies the potential impact of electrochromic windows on US primary energy use in the commercial building sector and also provides a broader database of energy use and peak demand savings for perimeter zones than that given in previous LBNL simulation studies. The DOE-2.1E building simulation program was used to predict the annual energy use of a three-story prototypical commercial office building located in five US climates and 16 California climate zones. The energy performance of an electrochromic window controlled to maintain daylight illuminance at a prescribed setpoint level is compared to conventional and the best available commercial windows as well as windows defined by the ASHRAE 90.1-1999 and California Title 24-2005 Prescriptive Standards. Perimeter zone energy use and peak demand savings data by orientation, window size, and climate are given for windows with interior shading, attached shading, and horizon obstructions (to simulate an urban environment). Perimeter zone primary energy use is reduced by 10-20% in east, south, and west zones in most climates if the commercial building has a large window-to-wall area ratio of 0.60 compared to a spectrally selective low-e window with daylighting controls and no interior or exterior shading. Peak demand for the same condition is reduced by 20-30%. The emerging electrochromic window with daylighting controls is projected to save approximately 91.5-97.3 10{sup 12} Btu in the year 2030 compared to a spectrally selective low-E window with manually-controlled interior shades and no daylighting controls if it reaches a 40% market penetration level in that year.

  7. U.S. Department of the Interior U.S. Geological Survey

    E-Print Network [OSTI]

    U.S. Department of the Interior U.S. Geological Survey September 2011 Ecosystem Services management to global change. Wetlands Wetlands give us food and clean water; shelter us from storms, floods- sions that affect not only ecosystems, but also tourism, human safety, and fisheries. Coral Reefs

  8. Windows XP - LPR Printing

    E-Print Network [OSTI]

    dbrown

    2004-07-27T23:59:59.000Z

    To print to the math department printers in Windows XP, “Print Services for Unix” must be ... Page 3 ... The wizard will proceed to install "Print Services for Unix". ... Email systems@math.purdue.edu if you need assistance. D. Brown. 7/26/04.

  9. Superconducting radiofrequency window assembly

    DOE Patents [OSTI]

    Phillips, Harry L. (Seaford, VA); Elliott, Thomas S. (Yorktown, VA)

    1997-01-01T23:59:59.000Z

    The present invention is a superconducting radiofrequency window assembly for use in an electron beam accelerator. The srf window assembly (20) has a superconducting metal-ceramic design. The srf window assembly (20) comprises a superconducting frame (30), a ceramic plate (40) having a superconducting metallized area, and a superconducting eyelet (50) for sealing plate (40) into frame (30). The plate (40) is brazed to eyelet (50) which is then electron beam welded to frame (30). A method for providing a ceramic object mounted in a metal member to withstand cryogenic temperatures is also provided. The method involves a new metallization process for coating a selected area of a ceramic object with a thin film of a superconducting material. Finally, a method for assembling an electron beam accelerator cavity utilizing the srf window assembly is provided. The procedure is carried out within an ultra clean room to minimize exposure to particulates which adversely affect the performance of the cavity within the electron beam accelerator.

  10. Superconductive radiofrequency window assembly

    DOE Patents [OSTI]

    Phillips, Harry Lawrence (Seaford, VA); Elliott, Thomas S. (Yorktown, VA)

    1998-01-01T23:59:59.000Z

    The present invention is a superconducting radiofrequency window assembly for use in an electron beam accelerator. The srf window assembly (20) has a superconducting metal-ceramic design. The srf window assembly (20) comprises a superconducting frame (30), a ceramic plate (40) having a superconducting metallized area, and a superconducting eyelet (50) for sealing plate (40) into frame (30). The plate (40) is brazed to eyelet (50) which is then electron beam welded to frame (30). A method for providing a ceramic object mounted in a metal member to withstand cryogenic temperatures is also provided. The method involves a new metallization process for coating a selected area of a ceramic object with a thin film of a superconducting material. Finally, a method for assembling an electron beam accelerator cavity utilizing the srf window assembly is provided. The procedure is carried out within an ultra clean room to minimize exposure to particulates which adversely affect the performance of the cavity within the electron beam accelerator.

  11. Windows and lighting program

    SciTech Connect (OSTI)

    Not Available

    1990-06-01T23:59:59.000Z

    More than 30% of all energy use in buildings is attributable to two sources: windows and lighting. Together they account for annual consumer energy expenditures of more than $50 billion. Each affects not only energy use by other major building systems, but also comfort and productivity -- factors that influence building economics far more than does direct energy consumption alone. Windows play a unique role in the building envelope, physically separating the conditioned space from the world outside without sacrificing vital visual contact. Throughout the indoor environment, lighting systems facilitate a variety of tasks associated with a wide range of visual requirements while defining the luminous qualities of the indoor environment. Windows and lighting are thus essential components of any comprehensive building science program. Despite important achievements in reducing building energy consumption over the past decade, significant additional savings are still possible. These will come from two complementary strategies: (1) improve building designs so that they effectively apply existing technologies and extend the market penetration of these technologies; and (2) develop advanced technologies that increase the savings potential of each application. Both the Windows and Daylighting Group and the Lighting System Research Group have made substantial contributions in each of these areas, and continue to do so through the ongoing research summarized here. 23 refs., 16 figs.

  12. Carbon smackdown: smart windows

    ScienceCinema (OSTI)

    Delia Milliron

    2010-09-01T23:59:59.000Z

    August 3, 2010 Berkeley Lab talk: In the fourth of five Carbon Smackdown matches, Berkeley Lab researchers Delia Milliron of the Materials Sciences Division and Stephen Selkowitz of the Environmental Energy Technologies Division talk about their work on energy-saving smart windows.

  13. Zero Energy Windows

    E-Print Network [OSTI]

    Arasteh, Dariush; Selkowitz, Steve; Apte, Josh; LaFrance, Marc

    2006-01-01T23:59:59.000Z

    impact of 4.1 quadrillion BTU (quads) of primary energy 1 .systems with U-factors of 0.1 Btu/hr-ft²-°F Dynamic windows:for 1 quadrillion (10 15 ) Btu = 1.056 EJ. percent (Apte,

  14. Report Concerns: Storm Water Quality Hotline

    E-Print Network [OSTI]

    California at Santa Cruz, University of

    is imple- menting the Storm Water Manage- ment Plan (SWMP), which identifies many Best Management Practices Management Program Intern for the UCSC Storm Water Management Program. Contact us at: cleanwater@ucsc.edu Like us on Facebook at UCSC Storm Water Management Program (831) 459--4520 In this Issue: Storm Water

  15. Storm Water Quality Please report any concerns,

    E-Print Network [OSTI]

    California at Santa Cruz, University of

    ) 4594520 http://cleanwater.ucsc.edu Volunteer and intern with the Storm Water Management Program the Campus Stewardship Program Like us on Facebook at UC Santa Cruz Storm Water Management Program Learn more about the UCSC Storm Water Management Program and UCSC Storm Water Management Plan

  16. The Window Strategy with Options

    E-Print Network [OSTI]

    McCorkle, Dean; Amosson, Stephen H.; Fausett, Marvin

    1999-06-23T23:59:59.000Z

    The window strategy is one of several marketing strategies using futures and options to establish a floor price and allow for upside price potential. It also reduces option premium costs. This publication discusses how the window strategy works...

  17. Performance Criteria for Residential Zero Energy Windows

    E-Print Network [OSTI]

    Arasteh, Dariush; Goudey, Howdy; Huang, Joe; Kohler, Christian; Mitchell, Robin

    2006-01-01T23:59:59.000Z

    neutral energy impact of windows (energy consumption of buildingneutral energy impact of windows (energy consumption of buildingneutral energy impact of windows (energy consumption of building

  18. A Review of Electrochromic Window Performance Factors

    E-Print Network [OSTI]

    Selkowitz Ed, S.E.

    2010-01-01T23:59:59.000Z

    ratio of 0.30. The electrochromic windows were controlled toProceedings. A Review of Electrochromic Window Performanceand economic benefits of electrochromic smart windows,"

  19. THERMAL PERFORMANCE OF INSULATING WINDOW SYSTEMS

    E-Print Network [OSTI]

    Selkowitz, Stephen E.

    2011-01-01T23:59:59.000Z

    these windows incorporating hear mirror films are staticS. , "Thin Film Coatings for Energy Efficient Windows", LBLglazed windows with single and double plastic film inserts

  20. AN ENERGY EFFICIENT WINDOW SYSTEM FINAL REPORT.

    E-Print Network [OSTI]

    Authors, Various

    2011-01-01T23:59:59.000Z

    for a variety of glass window films and so provides thetesting metallized mylar window films. They involve exposingconsumers to install window film products. The rigid sheet

  1. Sensitivity analysis of window characteristics and their interactions on thermal performance in residential buildings

    E-Print Network [OSTI]

    George, Julie N

    1996-01-01T23:59:59.000Z

    acheived during daytime heating hours contribute to energy conservation by reducing the amount of auxiliary heat required to keep the interior temperatures at the desired levels (Balcomb et al. 1984). Proper utilization of solar heat gains should... in the thermal mass will be released to keep the building warm (Balcomb et al. 1984). Proper shading of windows can also greatly affect their thermal performance. Windows with properly designed shading and orientation supply a major portion of a buildings...

  2. University of Minnesota StormWaterMasterPlan

    E-Print Network [OSTI]

    Minnesota, University of

    .2 Storm Water Infrastructure and Management .................................................................................................. 17 3. Storm Water Management Recommendations .................................. 18 3.1.2 Alternative Approach to Storm Water Management

  3. Generation of graphitic soot by an urban fire storm

    SciTech Connect (OSTI)

    Fields, D.E.; Cole, L.L.

    1987-01-01T23:59:59.000Z

    The authors have obtained samples of aerosols deposited during the Hiroshima fire storm that was initiated by the atomic bomb detonated on August 6, 1945. These particles, which we extracted from streaks of black rain found on a plaster wall, are being studied. Initial studies show that the artifact appears to contain aerosol particles that may be representative of the aerosols that may lead to a nuclear winter. Aerosol generation in urban fire storms have been considered by studying these particles. The presence of graphite as a component of these particles is suggested by electron photomicrographs and has been confirmed using Raman spectroscopy, surface ionization mass spectroscopy, and electron scattering for chemical analysis. Several hypotheses are being considered to explain the presence of this form of carbon. Among these are generation in sooty clouds, in raindrops, in the interior of the first storm, and on the wall surface itself. The distribution of particle sizes suggests that the residence time of particles in the atmosphere would be long if they were not removed by rainout. An experimental and theoretical examination of the conditions necessary to produce graphitic soot is in progress.

  4. Window Replacement, Rehabilitation, & Repair Guides - Building...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Window Replacement, Rehabilitation, & Repair Guides - Building America Top Innovation Window Replacement, Rehabilitation, & Repair Guides - Building America Top Innovation Effec...

  5. Windows | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating SolarElectric Coop,SaveWhiskey Flats Geothermal Areaarticle is a stub.Wind)WindWindows

  6. Window Daylighting Demo

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy Usage »of| Department ofDepartment ofAnnouncementAugust 30,PowerJuneenabledandWindow

  7. Mosquito Problems after a Storm

    E-Print Network [OSTI]

    Johnsen, Mark

    2008-08-05T23:59:59.000Z

    ER-042 8-08 Mark M. Johnsen, Texas AgriLife Extension Service, The Texas A&M System After a severe storm, mosquito populations can explode, and the diseases they carry can be a danger to humans. Mosquito problems occur in two distinct waves after.... Louis encephalitis. This mosquito species lays eggs in roadside ditches, storm sew- ers, birdbaths, or any container or depression that holds water. Eggs hatch in 7 days. West Nile virus (WNV) has two distinct clini- cal forms known as West Nile Fever...

  8. 2011 Baird Holm LLP Storm Water Management

    E-Print Network [OSTI]

    Nebraska-Lincoln, University of

    for control of storm water runoff has been the use of best management practices ("BMPs") ­ Notwithstanding© 2011 Baird Holm LLP Storm Water Management ­ Shifting Paradigms John P. Heil, Esq. Baird Holm LLP@bairdholm.com #12;© 2011 Baird Holm LLP Introductory Summary · Storm water runoff is generated when precipitation

  9. INTRODUCTION TO STORM SURGE Introduction to

    E-Print Network [OSTI]

    a reference level Storm tide is the water level rise during a storm due to the combination of storm surge water levels to rise along the coast during a hurricane. Here are the others: Tides Water levels rise making decisions. Waves Breaking waves contribute to the water level rise through wave runup and wave

  10. Subject Responses to Electrochromic Windows

    SciTech Connect (OSTI)

    Clear, Robert; Inkarojrit, Vorapat; Lee, Eleanor

    2006-03-03T23:59:59.000Z

    Forty-three subjects worked in a private office with switchable electrochromic windows, manually-operated Venetian blinds, and dimmable fluorescent lights. The electrochromic window had a visible transmittance range of approximately 3-60%. Analysis of subject responses and physical data collected during the work sessions showed that the electrochromic windows reduced the incidence of glare compared to working under a fixed transmittance (60%) condition. Subjects used the Venetian blinds less often and preferred the variable transmittance condition, but used slightly more electric lighting with it than they did when window transmittance was fixed.

  11. Application issues for large-area electrochromic windows incommercial buildings

    SciTech Connect (OSTI)

    Lee, Eleanor S.; DiBartolomeo, D.L.

    2000-05-01T23:59:59.000Z

    Projections of performance from small-area devices to large-area windows and enterprise marketing have created high expectations for electrochromic glazings. As a result, this paper seeks to precipitate an objective dialog between material scientists and building-application scientists to determine whether actual large-area electrochromic devices will result in significant performance benefits and what material improvements are needed, if any, to make electrochromics more practical for commercial building applications. Few in-situ tests have been conducted with large-area electrochromic windows applied in buildings. This study presents monitored results from a full-scale field test of large-area electrochromic windows to illustrate how this technology will perform in commercial buildings. The visible transmittance (Tv) of the installed electrochromic ranged from 0.11 to 0.38. The data are limited to the winter period for a south-east-facing window. The effect of actual device performance on lighting energy use, direct sun control, discomfort glare, and interior illumination is discussed. No mechanical system loads were monitored. These data demonstrate the use of electrochromics in a moderate climate and focus on the most restrictive visual task: computer use in offices. Through this small demonstration, we were able to determine that electrochromic windows can indeed provide unmitigated transparent views and a level of dynamic illumination control never before seen in architectural glazing materials. Daily lighting energy use was 6-24 percent less compared to the 11 percent-glazing, with improved interior brightness levels. Daily lighting energy use was 3 percent less to 13 percent more compared to the 38 percent-glazing, with improved window brightness control. The electrochromic window may not be able to fulfill both energy-efficiency and visual comfort objectives when low winter direct sun is present, particularly for computer tasks using cathode-ray tube (CRT) displays. However, window and architectural design as well as electrochromic control options are suggested as methods to broaden the applicability of electrochromics for commercial buildings. Without further modification, its applicability is expected to be limited during cold winter periods due to its slow switching speed.

  12. A window on urban sustainability

    SciTech Connect (OSTI)

    Stigt, Rien van, E-mail: rien.vanstigt@hu.nl [Research Center for Technology and Innovation, Utrecht University of Applied Sciences, P.O. Box 182, 3500 AD Utrecht (Netherlands); Driessen, Peter P.J., E-mail: p.driessen@uu.nl [Copernicus Institute of Sustainable Development, Faculty of Geosciences, Utrecht University, P.O. Box 80.115, 3508 TC Utrecht (Netherlands); Spit, Tejo J.M., E-mail: T.J.M.Spit@uu.nl [Department of Human Geography and Spatial Planning, Faculty of Geosciences, Utrecht University, P.O. Box 80.115, 3508 TC Utrecht (Netherlands)

    2013-09-15T23:59:59.000Z

    Sustainable urban development requires the integration of environmental interests in urban planning. Although various methods of environmental assessment have been developed, plan outcomes are often disappointing due to the complex nature of decision-making in urban planning, which takes place in multiple arenas within multiple policy networks involving diverse stakeholders. We argue that the concept of ‘decision windows’ can structure this seemingly chaotic chain of interrelated decisions. First, explicitly considering the dynamics of the decision-making process, we further conceptualized decision windows as moments in an intricate web of substantively connected deliberative processes where issues are reframed within a decision-making arena, and interests may be linked within and across arenas. Adopting this perspective in two case studies, we then explored how decision windows arise, which factors determine their effectiveness and how their occurrence can be influenced so as to arrive at more sustainable solutions. We conclude that the integration of environmental interests in urban planning is highly dependent on the ability of the professionals involved to recognize and manipulate decision windows. Finally, we explore how decision windows may be opened. -- Highlights: • Decision-making about sustainable urban development occurs in networks. • The concept of ‘decision windows’ was further elaborated. • Decision windows help understand how environmental interests enter decision-making. • Decision windows can, to some extent, be influenced.

  13. High-Efficiency Window Air Conditioners - Building America Top...

    Broader source: Energy.gov (indexed) [DOE]

    Window Air Conditioners - Building America Top Innovation This photo shows a window air conditioning unit in place in a window frame. Window air conditioners are inexpensive,...

  14. Transparency: it's not just for windows

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for windows Transparency: it's not just for windows Los Alamos National Laboratory's database of environmental monitoring data is now directly viewable by the public. March 20,...

  15. Applicability of Solar Airflow Windows

    E-Print Network [OSTI]

    Hamed, M. S.; Friedrich, K.; Razaqpur, G.; Foo, S.

    2010-01-01T23:59:59.000Z

    Accurate prediction of the performance of Solar Air Windows (SAWs) operating in various climates under real conditions has not been investigated. This paper reports the results of numerical simulations of SAWs carried out using ANSYS-CFX considering...

  16. Window-closing safety system

    DOE Patents [OSTI]

    McEwan, Thomas E. (Livermore, CA)

    1997-01-01T23:59:59.000Z

    A safety device includes a wire loop embedded in the glass of a passenger car window and routed near the closing leading-edge of the window. The wire loop carries microwave pulses around the loop to and from a transceiver with separate output and input ports. An evanescent field only and inch or two in radius is created along the wire loop by the pulses. Just about any object coming within the evanescent field will dramatically reduce the energy of the microwave pulses received back by the transceiver. Such a loss in energy is interpreted as a closing area blockage, and electrical interlocks are provided to halt or reverse a power window motor that is actively trying to close the window.

  17. Close Window MARCH 3, 2003

    E-Print Network [OSTI]

    Close Window MARCH 3, 2003 DEVELOPMENTS TO WATCH Killing Superbugs from Within A common moth may the surface of a flat, thin-film mirror. But these deformable mirror lenses are small--only a few inches

  18. Window-closing safety system

    DOE Patents [OSTI]

    McEwan, T.E.

    1997-08-26T23:59:59.000Z

    A safety device includes a wire loop embedded in the glass of a passenger car window and routed near the closing leading-edge of the window. The wire loop carries microwave pulses around the loop to and from a transceiver with separate output and input ports. An evanescent field only an inch or two in radius is created along the wire loop by the pulses. Just about any object coming within the evanescent field will dramatically reduce the energy of the microwave pulses received back by the transceiver. Such a loss in energy is interpreted as a closing area blockage, and electrical interlocks are provided to halt or reverse a power window motor that is actively trying to close the window. 5 figs.

  19. CMU-ITC-86-045 , Windowing

    E-Print Network [OSTI]

    on window-manager style graphics systems using the Tek termi- nals, inspired by some film Alan Kay showedCMU-ITC-86-045 , Windowing Systems , Implementations #12;#12;Window System Implementations Denver ABSTRACT Notes for a course given at the 1986 Winter Usenix meeting in Denver, CO. It covers window systems

  20. Extending the X Window System

    SciTech Connect (OSTI)

    Brenkosh, J.P.

    1993-12-23T23:59:59.000Z

    The X Window System was originally developed in 1984 at Massachusetts Institute of Technology. It provides client-server computing functionality and also facilitates the establishment of a distributed computing environment. Since its inception the X Window System has undergone many enhancements. Despite these enhancements there will always be a functionality desired in the standard released version of X that is not supported or commercially or academically available. The developers of the X Window System have designed it in such a way that it is possible to add functionality that is not included in the standard release. This is called an extension. Extensions are one method used to develop a customized version of the X Window System to support a specialized application. This report presents the mechanics of adding an extension and examines a particular extension that was developed at Sandia National Laboratories to support data compression in X Windows which was one aspect of the Desktop Video and Collaborative Engineering Laboratory Directed Research and Development (LDRD).

  1. Side-by-Side Field Evaluation of Highly Insulating Windows in the PNNL Lab Homes

    SciTech Connect (OSTI)

    Widder, Sarah H.; Parker, Graham B.; Baechler, Michael C.; Bauman, Nathan N.

    2012-08-01T23:59:59.000Z

    To examine the energy, air leakage, and thermal performance of highly insulating windows, a field evaluation was undertaken in a matched pair of all-electric, factory-built “Lab Homes” located on the Pacific Northwest National Laboratory (PNNL) campus in Richland, Washington. The “baseline” Lab Home B was retrofitted with “standard” double-pane clear aluminum-frame slider windows and patio doors, while the “experimental” Lab Home A was retrofitted with Jeld-Wen® triple-pane vinyl-frame slider windows and patio doors with a U-factor of 0.2 and solar heat gain coefficient of 0.19. To assess the window, the building shell air leakage, energy use, and interior temperatures of each home were compared during the 2012 winter heating and summer cooling seasons. The measured energy savings in Lab Home B averaged 5,821 watt-hours per day (Wh/day) during the heating season and 6,518 Wh/day during the cooling season. The overall whole-house energy savings of Lab Home B compared to Lab Home A are 11.6% ± 1.53% for the heating season and 18.4 ± 2.06% for the cooling season for identical occupancy conditions with no window coverings deployed. Extrapolating these energy savings numbers based on typical average heating degree days and cooling degree days per year yields an estimated annual energy savings of 12.2%, or 1,784 kWh/yr. The data suggest that highly insulating windows are an effective energy-saving measure that should be considered for high-performance new homes and in existing retrofits. However, the cost effectiveness of the measure, as determined by the simple payback period, suggests that highly insulating window costs continue to make windows difficult to justify on a cost basis alone. Additional reductions in costs via improvements in manufacturing and/or market penetration that continue to drive down costs will make highly insulating windows much more viable as a cost-effective energy efficiency measure. This study also illustrates that highly insulating windows have important impacts on peak load, occupant comfort, and condensation potential, which are not captured in the energy savings calculation. More consistent and uniform interior temperature distributions suggest that highly insulated windows, as part of a high performance building envelope, may enable more centralized duct design and downsized HVAC systems. Shorter, more centralized duct systems and smaller HVAC systems to yield additional cost savings, making highly insulating windows more cost effective as part of a package of new construction or retrofit measures which achieve significant reductions in home energy use.

  2. Tips: Windows | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassiveSubmittedStatusButler Tina Butler Tina-Butler.jpgLightingWindows Tips: Windows

  3. Savings Project: Install Exterior Storm Windows With Low-E Coating |

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy UsageAUDITVehicles »ExchangeDepartmentResolve to Save EnergySandiaDepartment

  4. Storm Windows (Even with a Low-E Coating!) | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGYWomenthe House Committee on Energy andDepartmentDepartment ofTheSteven Croley

  5. Ultrasonic cleaning of interior surfaces

    DOE Patents [OSTI]

    MacKenzie, D.; Odell, C.

    1994-03-01T23:59:59.000Z

    An ultrasonic cleaning apparatus is described for cleaning the interior surfaces of tubes. The apparatus includes an ultrasonic generator and reflector each coupled to opposing ends of the open-ended, fluid-filled tube. Fluid-tight couplings seal the reflector and generator to the tube, preventing leakage of fluid from the interior of the tube. The reflector and generator are operatively connected to actuators, whereby the distance between them can be varied. When the distance is changed, the frequency of the sound waves is simultaneously adjusted to maintain the resonant frequency of the tube so that a standing wave is formed in the tube, the nodes of which are moved axially to cause cavitation along the length of the tube. Cavitation maximizes mechanical disruption and agitation of the fluid, dislodging foreign material from the interior surface. 3 figures.

  6. Ultrasonic cleaning of interior surfaces

    DOE Patents [OSTI]

    Odell, D. MacKenzie C. (Aiken, SC)

    1996-01-01T23:59:59.000Z

    An ultrasonic cleaning method for cleaning the interior surfaces of tubes. The method uses an ultrasonic generator and reflector each coupled to opposing ends of the open-ended, fluid-filled tube. Fluid-tight couplings seal the reflector and generator to the tube, preventing leakage of fluid from the interior of the tube. The reflector and generator are operatively connected to actuators, whereby the distance between them can be varied. When the distance is changed, the frequency of the sound waves is simultaneously adjusted to maintain the resonant frequency of the tube so that a standing wave is formed in the tube, the nodes of which are moved axially to cause cavitation along the length of the tube. Cavitation maximizes mechanical disruption and agitation of the fluid, dislodging foreign material from the interior surface.

  7. Ultrasonic cleaning of interior surfaces

    DOE Patents [OSTI]

    Odell, D. MacKenzie C. (Aiken, SC)

    1994-01-01T23:59:59.000Z

    An ultrasonic cleaning apparatus for cleaning the interior surfaces of tubes. The apparatus includes an ultrasonic generator and reflector each coupled to opposing ends of the open-ended, fluid-filled tube. Fluid-tight couplings seal the reflector and generator to the tube, preventing leakage of fluid from the interior of the tube. The reflector and generator are operatively connected to actuators, whereby the distance between them can be varied. When the distance is changed, the frequency of the sound waves is simultaneously adjusted to maintain the resonant frequency of the tube so that a standing wave is formed in the tube, the nodes of which are moved axially to cause cavitation along the length of the tube. Cavitation maximizes mechanical disruption and agitation of the fluid, dislodging foreign material from the interior surface.

  8. Rolling, Rolling, Rolling: Roller Window Shades | Department...

    Broader source: Energy.gov (indexed) [DOE]

    anyway, even if our windows were of the highest efficiency. One of my colleagues in a solar energy group I belonged to was a distributor of a high R-value quilted roller window...

  9. AIR LEAKAGE OF NEWLY INSTALLED RESIDENTIAL WINDOWS

    E-Print Network [OSTI]

    Weidt, John

    2013-01-01T23:59:59.000Z

    Tables 2.0.2a 2.0.2b PAGE Air Leakage Through Sash/FrameOperation Types . . . . . Air Leakage of Installed WindowsComparison of Window Types Air Leakage Performance of

  10. IT Administrator's Guide to Using Windows Vista

    E-Print Network [OSTI]

    Narasayya, Vivek

    IT Administrator's Guide to Using Windows Vista® for Sustainable IT Success Published: February Administrator's Guide to Using Windows Vista for Sustainable IT Success Contents Executive Summary ................................................................................................ 3 Sustainable IT Goals

  11. RUGGED CERAMIC WINDOW FOR RF APPLICATIONS

    SciTech Connect (OSTI)

    MIKE NEUBAUER

    2012-11-01T23:59:59.000Z

    High-current RF cavities that are needed for many accelerator applications are often limited by the power transmission capability of the pressure barriers (windows) that separate the cavity from the power source. Most efforts to improve RF window design have focused on alumina ceramic, the most popular historical choice, and have not taken advantage of new materials. Alternative window materials have been investigated using a novel Merit Factor comparison and likely candidates have been tested for the material properties which will enable construction in the self-matched window configuration. Window assemblies have also been modeled and fabricated using compressed window techniques which have proven to increase the power handling capability of waveguide windows. Candidate materials have been chosen to be used in fabricating a window for high power testing at Thomas Jefferson National Accelerator Facility.

  12. An analysis of residential window waterproofing systems

    E-Print Network [OSTI]

    Parsons, Austin, 1959-

    2004-01-01T23:59:59.000Z

    The prevalence of vinyl nail-on windows in the North American new home construction market has prompted ASTM International to write ASTM E2112-01 "Standard Practice for Installation of Exterior Windows, Doors and Skylights". ...

  13. Pacific Northwest Storms Situation Report # 1

    SciTech Connect (OSTI)

    none,

    2006-12-15T23:59:59.000Z

    Severe wind and snow storms hit the Pacific Northwest region on December 14 – 15, 2006, following severe flooding during the past few days. The severe weather resulted in major power outages through the region. At peak there were 1.8 million customers without power which included BC Hydro in Canada. Currently, there are over 1.5 million outages in the region as a result of the Pacific Northwest Storms. This represents about 42 percent of customers in affected utility service areas in Oregon and Washington. See table below. Because the current wind and snow storms are coming on the heels of extensive flooding in the region, electric utilities are experiencing damage. Wind gusts reached close to 100 mph in some areas of the region. The storm is expected to bring its strong winds and heavy snow into Idaho, Montana and Wyoming Friday and into the weekend. There are currently no reported major impacts to the petroleum and natural gas infrastructure.

  14. Simulating Complex Window Systems using BSDF Data

    E-Print Network [OSTI]

    Konstantoglou, Maria

    2011-01-01T23:59:59.000Z

    Daylighting, Design tools and methods INTRODUCTION Simulations enable designers and engineers to evaluate and select the best available window solutions

  15. A Design Guide for Early-Market Electrochromic Windows

    E-Print Network [OSTI]

    2006-01-01T23:59:59.000Z

    Guide for Early-Market Electrochromic Windows. CaliforniaGuide for Early-Market Electrochromic Windows. CaliforniaGUIDE FOR EARLY-MARKET ELECTROCHROMIC WINDOWS Prepared For:

  16. A Design Guide for Early-Market Electrochromic Windows

    E-Print Network [OSTI]

    2006-01-01T23:59:59.000Z

    Office worker preferences of electrochromic windows: a pilotDetails for an Electrochromic Window Wall Attached arethe performance of the electrochromic windows. Proceedings

  17. Windows and Building Envelope Research and Development Roadmap...

    Broader source: Energy.gov (indexed) [DOE]

    Windows and Building Envelope Research and Development Roadmap Windows and Building Envelope Research and Development Roadmap Cover of windows and envelope report, depicting a...

  18. Highly Insulating Residential Windows Using Smart Automated Shading...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Highly Insulating Residential Windows Using Smart Automated Shading Highly Insulating Residential Windows Using Smart Automated Shading Addthis 1 of 3 Residential Smart Window with...

  19. Non-storm water discharges technical report

    SciTech Connect (OSTI)

    Mathews, S.

    1994-07-01T23:59:59.000Z

    Lawrence Livermore National Laboratory (LLNL) submitted a Notice of Intent to the California State Water Resources Control Board (hereafter State Board) to discharge storm water associated with industrial activities under the California General Industrial Activity Storm Water National Pollutant Elimination System Discharge Permit (hereafter General Permit). As required by the General Permit, LLNL provided initial notification of non-storm water discharges to the Central Valley Regional Water Quality Control Board (hereafter Regional Board) on October 2, 1992. Additional findings and progress towards corrective actions were reported in subsequent annual monitoring reports. LLNL was granted until March 27, 1995, three years from the Notice of Intent submission date, to eliminate or permit the non-storm water discharges. On May 20, 1994, the Regional Board issued Waste Discharge Requirements (WDR Board Order No. 94-131, NPDES No. CA0081396) to LLNL for discharges of non-contact cooling tower wastewater and storm water related to industrial activities. As a result of the issuance of WDR 94-131, LLNL rescinded its coverage under the General Permit. WDR 94-131 allowed continued non-storm water discharges and requested a technical report describing the discharges LLNL seeks to permit. For the described discharges, LLNL anticipates the Regional Board will either waive Waste Discharge Requirements as allowed for in The Water Quality Control Plan for the California Regional Water Quality Control Board, Central Valley Region (hereafter Basin Plan) or amend Board Order 94-131 as appropriate.

  20. UC Santa Cruz Storm Water SPRING 2010 Volume 3, Number 1

    E-Print Network [OSTI]

    California at Santa Cruz, University of

    ://cleanwater.ucsc.edu Contact us at: cleanwater@ucsc.edu or (831) 459-4520 Clean storm water Storm water is generally rainwater. Rainwater runoff enters the storm drains and is discharged into the campus's natural environment. Do into the storm drains!!! Storm drains are only for the collection of storm water. Basic storm water protection

  1. Rigid thin windows for vacuum applications

    DOE Patents [OSTI]

    Meyer, Glenn Allyn (Danville, CA); Ciarlo, Dino R. (Livermore, CA); Myers, Booth Richard (Livermore, CA); Chen, Hao-Lin (Lafayette, CA); Wakalopulos, George (Pacific Palisades, CA)

    1999-01-01T23:59:59.000Z

    A thin window that stands off atmospheric pressure is fabricated using photolithographic and wet chemical etching techniques and comprises at least two layers: an etch stop layer and a protective barrier layer. The window structure also comprises a series of support ribs running the width of the window. The windows are typically made of boron-doped silicon and silicon nitride and are useful in instruments such as electron beam guns and x-ray detectors. In an electron beam gun, the window does not impede the electrons and has demonstrated outstanding gun performance and survivability during the gun tube manufacturing process.

  2. AN INTERIOR POINT METHOD FOR MATHEMATICAL PROGRAMS ...

    E-Print Network [OSTI]

    Abstract. Interior point methods for nonlinear programs (NLP) are adapted for solution of mathematical programs with complementarity constraints (MPCCs).

  3. Colorado ClassicsColorado Classics --Our Legendary StormsOur Legendary Storms

    E-Print Network [OSTI]

    Colorado ClassicsColorado Classics -- Our Legendary StormsOur Legendary Storms Nolan J.Nolan J. DoeskenDoesken Colorado Climate Center Colorado State University Presented at 7NEWS Winter Weather Seminar, Omni Interlocken Hotel, Broomfield, Colo, November 9, 2005 #12;1888 Colorado Historical Society, Call

  4. College of Design ID Interior Design

    E-Print Network [OSTI]

    MacAdam, Keith

    College of Design ID Interior Design KEY: # = new course * = course changed = course dropped University of Kentucky 2013-2014 Undergraduate Bulletin 1 ID 101 INTRODUCTION TO INTERIOR DESIGN. (1) An introduction to the profession of Interior Design: historical perspective, career specializations, and career

  5. High resolution non-contact interior profilometer

    DOE Patents [OSTI]

    Piltch, Martin S. (Los Alamos, NM); Patterson, R. Alan (Los Alamos, NM); Leeches, Gerald W. (Los Alamos, NM); Nierop, John Van (Largo, FL); Teti, John J. (Tampa, FL)

    2001-01-01T23:59:59.000Z

    Apparatus and method for inspecting the interior surfaces of devices such as vessels having a single entry port. Laser energy is launched into the vessel, and the light reflected from the interior surfaces is interfered with reference laser energy to produce an interference pattern. This interference pattern is analyzed to reveal information about the condition of the interior surfaces of the device inspected.

  6. An Evaluation of the Interior Wetlands

    E-Print Network [OSTI]

    #12;An Evaluation of the Interior Wetlands Program Accomplishments and Impacts to Date Prepared Interior Wetlands Program Evaluation Page i EXECUTIVE SUMMARY EXECUTIVE SUMMARY An Evaluation of the Interior Wetlands Program (IWP): Accomplishments and Impacts to Date This document presents the results

  7. An Evaluation of the Interior Wetlands

    E-Print Network [OSTI]

    #12;An Evaluation of the Interior Wetlands Program Accomplishments and Impacts to Date Executive;Dovetail Consulting Interior Wetlands Program Evaluation Page i EXECUTIVE SUMMARY EXECUTIVE SUMMARY An Evaluation of the Interior Wetlands Program (IWP): Accomplishments and Impacts to Date This document presents

  8. Window Types | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy UsageAUDITVehiclesTankless or Demand-TypeWelcome toFarm Growth Through theofWindow

  9. Stanek Windows | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ < RAPID Jump to:Seadov Pty Ltd JumpGTZHolland,0162112°,St. Charles isStallings,StandardizedStanek Windows

  10. INTERIOR

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou$0.C. 20545*. . : '* FEB1f\lMUC4cb90,fioml7aaixa6-qc

  11. Pacific Northwest Storms Situation Report # 7

    SciTech Connect (OSTI)

    none,

    2006-12-21T23:59:59.000Z

    Despite a small storm that came through the area last night with wind gusts peaking at 45 MPH, progress continues to be made in restoring power to customers who lost power during the December 14-15 storms which hit the Pacific Northwest region. Currently, 95,971 customers remain without power, down from 1.8 million customers. The wind storm which affected the area yesterday was not as bad as previously expected, with the majority of the customer outages in the BC Hydro region, and 3,000 additional customer outages in the Puget Sound Energy service area. The customers without power represent 5 percent of customers in the affected utility service areas of Washington. The majority of customers without power are served by Puget Sound Energy, BC Hydro, and Seattle City Light.

  12. Hybrid window layer for photovoltaic cells

    DOE Patents [OSTI]

    Deng, Xunming (Syvania, OH); Liao, Xianbo (Toledo, OH); Du, Wenhui (Toledo, OH)

    2011-10-04T23:59:59.000Z

    A novel photovoltaic solar cell and method of making the same are disclosed. The solar cell includes: at least one absorber layer which could either be a lightly doped layer or an undoped layer, and at least a doped window-layers which comprise at least two sub-window-layers. The first sub-window-layer, which is next to the absorber-layer, is deposited to form desirable junction with the absorber-layer. The second sub-window-layer, which is next to the first sub-window-layer, but not in direct contact with the absorber-layer, is deposited in order to have transmission higher than the first-sub-window-layer.

  13. Hybrid window layer for photovoltaic cells

    DOE Patents [OSTI]

    Deng, Xunming (Syvania, OH)

    2010-02-23T23:59:59.000Z

    A novel photovoltaic solar cell and method of making the same are disclosed. The solar cell includes: at least one absorber layer which could either be a lightly doped layer or an undoped layer, and at least a doped window-layers which comprise at least two sub-window-layers. The first sub-window-layer, which is next to the absorber-layer, is deposited to form desirable junction with the absorber-layer. The second sub-window-layer, which is next to the first sub-window-layer, but not in direct contact with the absorber-layer, is deposited in order to have transmission higher than the first-sub-window-layer.

  14. Hybrid window layer for photovoltaic cells

    DOE Patents [OSTI]

    Deng, Xunming (Sylvania, OH); Liao, Xianbo (Toledo, OH); Du, Wenhui (Toledo, OH)

    2011-02-01T23:59:59.000Z

    A novel photovoltaic solar cell and method of making the same are disclosed. The solar cell includes: at least one absorber layer which could either be a lightly doped layer or an undoped layer, and at least a doped window-layers which comprise at least two sub-window-layers. The first sub-window-layer, which is next to the absorber-layer, is deposited to form desirable junction with the absorber-layer. The second sub-window-layer, which is next to the first sub-window-layer, but not in direct contact with the absorber-layer, is deposited in order to have transmission higher than the first-sub-window-layer.

  15. THERMAL PERFORMANCE OF INSULATING WINDOW SYSTEMS

    E-Print Network [OSTI]

    Selkowitz, Stephen E.

    2011-01-01T23:59:59.000Z

    Efficient Use of Energy, New York (1975). Glaser, V.H.J. , "Energy Transport Control in Window Systems", Report ETR-1277-2, Stony Brook, New York, (

  16. A Review of Electrochromic Window Performance Factors

    E-Print Network [OSTI]

    Selkowitz Ed, S.E.

    2010-01-01T23:59:59.000Z

    influence the market acceptance of electrochromic windowsfor the eventual market success of electrochromic windows inearly niche market might consist of adding an electrochromic

  17. Imaging the Earth's Interior: the Angular Distribution of Terrestrial Neutrinos

    E-Print Network [OSTI]

    Brian D. Fields; Kathrin A. Hochmuth

    2004-05-31T23:59:59.000Z

    Decays of radionuclides throughout the Earth's interior produce geothermal heat, but also are a source of antineutrinos. The (angle-integrated) geoneutrino flux places an integral constraint on the terrestrial radionuclide distribution. In this paper, we calculate the angular distribution of geoneutrinos, which opens a window on the differential radionuclide distribution. We develop the general formalism for the neutrino angular distribution, and we present the inverse transformation which recovers the terrestrial radioisotope distribution given a measurement of the neutrino angular distribution. Thus, geoneutrinos not only allow a means to image the Earth's interior, but offering a direct measure of the radioactive Earth, both (1) revealing the Earth's inner structure as probed by radionuclides, and (2) allowing for a complete determination of the radioactive heat generation as a function of radius. We present the geoneutrino angular distribution for the favored Earth model which has been used to calculate geoneutrino flux. In this model the neutrino generation is dominated by decays in the Earth's mantle and crust; this leads to a very ``peripheral'' angular distribution, in which 2/3 of the neutrinos come from angles > 60 degrees away from the downward vertical. We note the possibility of that the Earth's core contains potassium; different geophysical predictions lead to strongly varying, and hence distinguishable, central intensities (< 30 degrees from the downward vertical). Other uncertainties in the models, and prospects for observation of the geoneutrino angular distribution, are briefly discussed. We conclude by urging the development and construction of antineutrino experiments with angular sensitivity. (Abstract abridged.)

  18. Laser sealed vacuum insulating window

    DOE Patents [OSTI]

    Benson, D.K.; Tracy, C.E.

    1985-08-19T23:59:59.000Z

    A laser sealed evacuated window panel is comprised of two glass panes held spaced apart in relation to each other by a plurality of spherical glass beads and glass welded around the edges to provide an evacuated space between the glass panes that is completely glass sealed from the exterior. The glass welded edge seal is obtained by welding the edges of the glass panes together with a laser beam while the glass panes and bead spacers are positioned in a vacuum furnace and heated to the annealing point of the glass to avoid stress fracture in the area of the glass weld. The laser welding in the furnace can be directed around the perimeter of the galss panel by a combination of rotating the glass panel and linearly translating or aiming the laser with a relay mirror.

  19. Laser sealed vacuum insulation window

    DOE Patents [OSTI]

    Benson, David K. (Golden, CO); Tracy, C. Edwin (Golden, CO)

    1987-01-01T23:59:59.000Z

    A laser sealed evacuated window panel is comprised of two glass panes held spaced apart in relation to each other by a plurality of spherical glass beads and glass welded around the edges to provide an evacuated space between the glass panes that is completely glass sealed from the exterior. The glass welded edge seal is obtained by welding the edges of the glass panes together with a laser beam while the glass panes and bead spacers are positioned in a vacuum furnace and heated to the annealing point of the glass to avoid stress fracture in the area of the glass weld. The laser welding in the furnace can be directed around the perimeter of the glass panel by a combination of rotating the glass panel and linearly translating or aiming the laser with a relay mirror.

  20. Challenges of Handling Storm Water Runoff Through Municipal Sewer Systems

    E-Print Network [OSTI]

    Illinois at Urbana-Champaign, University of

    cleaned and retained as a Best Management Practice (BMP). Receives only non-industrial storm water on storm water are leading municipalities to change permitting practices. As a result, facilitiesChallenges of Handling Storm Water Runoff Through Municipal Sewer Systems A South Carolina Case

  1. STORM WATER POLLUTION PREVENTION PLAN (RISK LEVEL 1)

    E-Print Network [OSTI]

    Eisen, Michael

    STORM WATER POLLUTION PREVENTION PLAN (RISK LEVEL 1) for BUILDING 90 USER TEST BED FACILITY.G., GEOLOGIST/QSD (530) 222-4339 SWPPP Preparation Date: JUNE 10, 2012 #12;Storm Water Pollution Prevention Plan) 222-4339 Name and Title Telephone Number #12;Storm Water Pollution Prevention Plan Building 90 User

  2. On Parameter Estimation of Urban Storm-Water Runoff Model

    E-Print Network [OSTI]

    On Parameter Estimation of Urban Storm-Water Runoff Model Pedro Avellaneda1 ; Thomas P. Ballestero2 of these parameters are provided for modeling purposes and other urban storm-water quality applications. A normal runoff models are commonly used for urban storm-water quality applications DeCoursey 1985; Tsi- hrintzis

  3. ORIGINAL PAPER Surface runoff contribution of nitrogen during storm events

    E-Print Network [OSTI]

    Ecosystem Management Model for TKN. Water quality and storm flow data collected from January 2000 TKN concentrations during storm. A storm water sampling program was carried out to gather requisite research has focused primarily on the water quality impacts of urban and agricultural land uses, whereas

  4. Building America Expert Meeting: Interior Insulation Retrofit...

    Broader source: Energy.gov (indexed) [DOE]

    Building Science Corporation team held an Expert Meeting on Interior Insulation Retrofit of Mass Masonry Wall Assemblies on July 30, 2011, at the Westford Regency Hotel in...

  5. Measure Guideline: Window Repair, Rehabilitation, and Replacement

    SciTech Connect (OSTI)

    Baker, P.

    2012-12-01T23:59:59.000Z

    This measure guideline provides information and guidance on rehabilitating, retrofitting, and replacing existing window assemblies in residential construction. The intent is to provide information regarding means and methods to improve the energy and comfort performance of existing wood window assemblies in a way that takes into consideration component durability, in-service operation, and long term performance of the strategies.

  6. Windows Enterprise Design Master Directory Sources

    E-Print Network [OSTI]

    Mayfield, John

    Windows Enterprise Design Master Directory Sources April 2, 2014 Active Directory information be to use a Microsoft "Outlook" email client to query Active Directory for someone with a certain "last name in Windows Active Directory. It is important the information correctly reflects your current name

  7. Solar Window Technology for BIPV or

    E-Print Network [OSTI]

    Painter, Kevin

    Solar Window Technology for BIPV or BAPV Energy Systems Problem this technology solves: Using of Solar energy considerably, photovoltaic or PV material is still a major $ cost/unit of energy produced a novel high efficiency concentrator design, this static "Solar Window" system is such that it allows

  8. Fractal Nature of Solar Interior

    E-Print Network [OSTI]

    Koushik Ghosh; Probhas Raychaudhuri

    2006-05-04T23:59:59.000Z

    Fractal method has been studied to understand the irregular and chaotic nature of any physical structure. Conventionally it is suggested that the solar interior is rigid in nature. Since solar neutrino flux is the indicator of the interior solar structure it is natural to study the solar neutrino flux source to find if the nuclear energy generation inside the sun is fractal in nature or not. At present there exist five solar neutrino experiments to detect neutrinos from the sun which can suggest which type of nuclear energy generation occurs inside the sun. Since we know that the solar atmosphere is irregular in nature many authors have studied this irregular nature by fractal analysis. In this regard we have studied solar neutrino flux data from 1) Homestake detector during the period from March, 1970 to April, 1994; 2) SAGE detector during the period from 1st January, 1990 to 31st December, 2000; 3) SAGE detector during the period from April, 1998 to December, 2001; 4) GALLEX detector during the period from May, 1991 to January, 1997; 5) GNO detector during the period from May, 1998 to December, 2001; 6) GALLEX-GNO detector (combined data) from May, 1991 to December, 2001; 7) average of the data from GNO and SAGE detectors during the period from May, 1998 to December, 2001; 8) 5-day-long samples from Super-Kamiokande-I detector during the period from June, 1996 to July,2001; 9) 10-day-long samples from Super-Kamiokande-I detector during the period from June,1996 to July,2001 and 10) 45-day-long samples from Super-Kamiokande-I detector during the period from June,1996 to July,2001 by fractal analysis and we have arrived at the conclusion that the solar neutrino flux data are fractal in nature.

  9. Tips for Daylighting with Windows

    SciTech Connect (OSTI)

    Robinson, Alastair; Selkowitz, Stephen

    2013-10-01T23:59:59.000Z

    These guidelines provide an integrated approach to the cost-effective design of perimeter zones in new commercial buildings and existing building retrofits. They function as a quick reference for building designers, through a set of easy steps and rules-of-thumb, emphasizing “how-to” practical details. References are given to more detailed sources of information, should the reader wish to go further. The design method used in this document emphasizes that building decisions should be made within the context of the whole building as a single functioning system rather than as an assembly of distinct parts. This integrated design approach looks at the ramifications of each individual system decision on the whole building. For example, the decision on glazing selection will have an effect on lighting, mechanical systems, and interior design. Therefore, the entire design team should participate and influence this glazing decision—which typically rests with the architect alone. The benefit of an integrated design approach is a greater chance of success towards long-term comfort and sustained energy savings in the building.

  10. Electrochromic windows for commercial buildings: Monitored results from a full-scale testbed

    E-Print Network [OSTI]

    Lee, Eleanor S.; DiBartolomeo, Dennis L.; Selkowitz, Stephen E.

    2000-01-01T23:59:59.000Z

    lifetime prediction of electrochromic windows for buildingsenergy performance of electrochromic windows. ” Proceedingsin the Proceedings. Electrochromic Windows for Commercial

  11. Lighting energy savings potential of split-pane electrochromic windows controlled for daylighting with visual comfort

    E-Print Network [OSTI]

    Fernandes, Luis

    2014-01-01T23:59:59.000Z

    Energy Performance of Electrochromic Windows Controlled forenergy performance of electrochromic windows. Proceedingssignal for daylight (electrochromic window, no overhang).

  12. The Sun's Interior Metallicity Constrained by Neutrinos

    E-Print Network [OSTI]

    Guillermo Gonzalez

    2006-05-25T23:59:59.000Z

    Observed solar neutrino fluxes are employed to constrain the interior composition of the Sun. Including the effects of neutrino flavor mixing, the results from Homestake, Sudbury, and Gallium experiments constrain the Mg, Si, and Fe abundances in the solar interior to be within a factor 0.89 to 1.34 of the surface values with 68% confidence. If the O and/or Ne abundances are increased in the interior to resolve helioseismic discrepancies with recent standard solar models, then the nominal interior Mg, Si, and Fe abundances are constrained to a range of 0.83 to 1.24 relative to the surface. Additional research is needed to determine whether the Sun's interior is metal poor relative to its surface.

  13. Window Manufacturer Sees Business Surge As Weatherization Supplier...

    Broader source: Energy.gov (indexed) [DOE]

    of the aluminum windows they're replacing - the U-value is the measure of the rate of heat loss or gain through a window. The lower the U-value, the better a window's...

  14. Pacific Northwest Storms Situation Report # 5

    SciTech Connect (OSTI)

    none,

    2006-12-19T23:59:59.000Z

    Significant progress has been made in restoring power to customers in the Pacific Northwest region. Currently, 186,627 customers remain without power. The majority of customers without power are served by Puget Sound Energy. This is down from 1.8 million customers who lost power following severe wind and snow storms on December 14-15, 2006. The customers without power represent about 6 percent of customers in the affected utility service areas of Oregon and Washington. See table below.

  15. Pacific Northwest Storms Situation Report # 4

    SciTech Connect (OSTI)

    none,

    2006-12-18T23:59:59.000Z

    Significant progress has been made in restoring power to customers in the Pacific Northwest region. Currently, 237,030 customers remain without power. This is down from 1.8 million customers who lost power following severe wind and snow storms on December 14-15, 2006. The customers without power represent about 8 percent of customers in the affected utility service areas of Oregon and Washington.

  16. FyreStorm Inc | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy Resources Jump to: navigation, search Equivalent URIFrontier,Jump to:Wilmette, ILFyreStorm Inc Jump to:

  17. U-028: Microsoft Windows win32k.sys TrueType Font Parsing Vulnerabilit...

    Broader source: Energy.gov (indexed) [DOE]

    Parsing Vulnerability. PLATFORM: Microsoft Windows 7 Microsoft Windows Server 2003 Datacenter Edition Microsoft Windows Server 2003 Enterprise Edition Microsoft Windows Server...

  18. Effects of Overhangs on the Performance of Electrochromic Windows

    E-Print Network [OSTI]

    Tavil, Aslihan; Lee, Eleanor S.

    2005-01-01T23:59:59.000Z

    issues for large-area electrochromic windows in commercialenergy performance of electrochromic windows controlled forwindows.lbl.gov/comm_perf/Electrochromic/ Winkelmann, F.C. ,

  19. June 1998Program Description Windows and Daylighting Group

    E-Print Network [OSTI]

    June 1998Program Description THERM 2.0 Windows and Daylighting Group Building Technologies, and Dariush Arasteh Windows and Daylighting Group Building Technologies Department Environmental Energy

  20. Assessment of Energy Impact of Window Technologies for Commercial Buildings

    E-Print Network [OSTI]

    Hong, Tianzhen

    2014-01-01T23:59:59.000Z

    1.2 quads. Future window technologies offer energy savingsImpact of Window Technologies for Commercial BuildingsEnvironmental Energy Technologies Division October 2009 This

  1. 700 MHz window R & D at LBNL

    E-Print Network [OSTI]

    Rimmer, R.A.; Koehler, G.; Saleh, T.; Weidenbach, R.

    2000-01-01T23:59:59.000Z

    LBNL-47939 LAUR 01-2574 CBP tech230 700 MHz Window R&D at LBNL R. Rimmer, G. Koehler, T.describes the R&D activities at LBNL under contract # 06261-

  2. Occupant Response to Window Control Signaling Systems

    E-Print Network [OSTI]

    Ackerly, Katherine

    2012-01-01T23:59:59.000Z

    my window it will waste energy.  Even so I open the windowthe windown wouldn’t waste energy. ” MS Thesis, Dept. ofthe potential for energy waste and balancing issues.  

  3. NREL Electrochromic Window Research Wins Award

    ScienceCinema (OSTI)

    None

    2013-05-29T23:59:59.000Z

    Winners of the CO-LABS Governor's Award for High-Impact Research in Energy Efficiency, Dr. Satyen Deb at the U.S. Department of Energy's National Renewable Energy Laboratory (NREL) discovered that a small electrical charge can change the opacity of tungsten oxide from clear to tinted. He, Dr. Dane Gillaspie, and their fellow scientists at NREL then applied this knowledge to develop and transfer the technologies required to construct an electrochromic window, which can switch between clear and heavily tinted states. Electrochromic windows allow natural light in while adding tint to reduce summer heat and glare, and going clear to allow sunlight through in the winter. Broad adaptation of these windows could reduce US total energy use by four percent and reduce building cooling loads by 20%, much of this during expensive peak hours. Windows based on these discoveries are now being installed worldwide.

  4. Empirical assessment of a prismatic daylight-redirecting window film in a full-scale office testbed

    SciTech Connect (OSTI)

    Thanachareonkit, Anothai; Lee, Eleanor S.; McNeil, Andrew

    2013-08-31T23:59:59.000Z

    Daylight redirecting systems with vertical windows have the potential to offset lighting energy use in deep perimeter zones. Microstructured prismatic window films can be manufactured using low-cost, roll-to-roll fabrication methods and adhered to the inside surface of existing windows as a retrofit measure or installed as a replacement insulating glass unit in the clerestory portion of the window wall. A clear film patterned with linear, 50-250 micrometer high, four-sided asymmetrical prisms was fabricated and installed in the south-facing, clerestory low-e, clear glazed windows of a full-scale testbed facility. Views through the film were distorted. The film was evaluated in a sunny climate over a two-year period to gauge daylighting and visual comfort performance. The daylighting aperture was small (window-towall ratio of 0.18) and the lower windows were blocked off to isolate the evaluation to the window film. Workplane illuminance measurements were made in the 4.6 m (15 ft) deep room furnished as a private office. Analysis of discomfort glare was conducted using high dynamic range imaging coupled with the evalglare software tool, which computes the daylight glare probability and other metrics used to evaluate visual discomfort. The window film was found to result in perceptible levels of discomfort glare on clear sunny days from the most conservative view point in the rear of the room looking toward the window. Daylight illuminance levels at the rear of the room were significantly increased above the reference window condition, which was defined as the same glazed clerestory window but with an interior Venetian blind (slat angle set to the cut-off angle), for the equinox to winter solstice period on clear sunny days. For partly cloudy and overcast sky conditions, daylight levels were improved slightly. To reduce glare, the daylighting film was coupled with a diffusing film in an insulating glazing unit. The diffusing film retained the directionality of the redirected light spreading it within a small range of outgoing angles. This solution was found to reduce glare to imperceptible levels while retaining for the most part the illuminance levels achieved solely by the daylighting film.

  5. Electrochromic sun control coverings for windows

    SciTech Connect (OSTI)

    Benson, D K; Tracy, C E

    1990-04-01T23:59:59.000Z

    The 2 billion square meters (m{sup 2}) of building windows in the United States cause a national energy drain almost as large as the energy supply of the Alaskan oil pipeline. Unlike the pipeline, the drain of energy through windows will continue well into the 21st century. A part of this energy drain is due to unwanted sun gain through windows. This is a problem throughout the country in commercial buildings because they generally require air conditioning even in cold climates. New commercial windows create an additional 1600 MW demand for peak electric power in the United States each year. Sun control films, widely used in new windows and as retrofits to old windows, help to mitigate this problem. However, conventional, static solar control films also block sunlight when it is wanted for warmth and daylighting. New electrochromic, switchable, sun-gain-control films now under development will provide more nearly optimal and automatic sun control for added comfort, decreased building operating expense, and greater energy saving. Switchable, electrochromic films can be deposited on polymers at high speeds by plasma enhanced chemical vapor deposition (PECVD) in a process that may be suitable for roll coating. This paper describes the electrochromic coatings and the PECVD processes, and speculates about their adaptability to high-speed roll coating. 8 refs., 3 figs.

  6. Building America Expert Meeting Report: Interior Insulation Retrofit...

    Broader source: Energy.gov (indexed) [DOE]

    Interior Insulation Retrofit of Mass Masonry Wall Assembliesessment of risk factors for premature building deterioration due to interior insulation retrofits, and methods to reduce...

  7. Transforming the market for residential windows: design considerations for DOE's Efficient Window Collaborative

    SciTech Connect (OSTI)

    Eto, J.; Arasteh, D.; Selkowitz, S.

    1998-08-01T23:59:59.000Z

    Market adoption of recent, commercially available technological advances that improve the energy performance of windows will lead to immediate economic and energy savings benefits to the nation. This paper is a scoping study intended to inform the design of a major DOE initiative to accelerate market adoption of these windows in the residential sector. We describe the structure of the US residential window market and the interests of the various market players. We then briefly review five recent market transformation initiatives. Finally, we summarize our findings in a list of considerations we believe will be important for the DOE's initiative to transform the US residential window market.

  8. Notice of Intent (NOI) for Storm Water Discharges Associated...

    Open Energy Info (EERE)

    Intent (NOI) for Storm Water Discharges Associated with Construction Activities under TPDES General Permit (TXR150000) Jump to: navigation, search OpenEI Reference LibraryAdd to...

  9. INTERIOR-POINT METHODS FOR NONCONVEX NONLINEAR ...

    E-Print Network [OSTI]

    2002-08-06T23:59:59.000Z

    We identify possible difficulties that could arise, such as unbounded faces of ..... not the first time this phenomenon has been noted. .... tables on the authors' website [1]. ... rank-deficient, which can create problems for an interior-point code

  10. Gravity Recovery and Interior Laboratory (GRAIL) Launch

    E-Print Network [OSTI]

    Gravity Recovery and Interior Laboratory (GRAIL) Launch Press Kit/AUGUst 2011 #12;http of its four channels to AC-3, making each channel's secondary audio MPEG 1 Layer II. For digital downlink

  11. Eighteenth-century merchant ship interiors

    E-Print Network [OSTI]

    Renner, Mary Anne

    1987-01-01T23:59:59.000Z

    EIGHTEENTH-CENTURY MERCHANT SHIP INTERIORS A Thesis by MARY ANNE RENNER Submitted to the Graduate College of Texas A&M University in partial fulfillment of the requirement for the degree of MASTER OF ARTS December 1987 Major Subject...: Anthropology EIGHTEENTH-CENTURY MERCHANT SHIP INTERIORS A Thesis by MARY ANNE RENNER Approved as to style and content by: Don L. Hamilton (Chairman of Committee) David L. Carlson (Member) Clark E. Adams (Member) Vaughn M. B ant, Jr. (Head...

  12. Pacific Northwest Storms Situation Report # 3

    SciTech Connect (OSTI)

    none,

    2006-12-17T23:59:59.000Z

    Significant progress has been made in restoring power to customers in the Pacific Northwest region. Currently, 468,200 customers, including Canada, remain without power. This is down from 1.8 million customers who lost power following severe wind and snow storms on December 14-15, 2006. The customers without power represent about 16 percent of customers in the affected utility service areas of Oregon and Washington. See table below. The Olympic pipeline reports that the pipeline is operational; however, pipeline throughput remains reduced since one substation along the line remains without power. Complete power restoration is expected later today. There are no reports of problems regarding fuel distribution and production.

  13. Pacific Northwest Storms Situation Report # 6

    SciTech Connect (OSTI)

    none,

    2006-12-20T23:59:59.000Z

    Significant progress has been made in restoring power to customers in the Pacific Northwest region. Currently, 134,868 customers remain without power. The number of outages is down from 1.8 million customers who lost power following severe wind and snow storms on December 14-15, 2006. The customers without power represent less than 5 percent of customers in the affected utility service areas of Oregon and Washington. The majority of customers without power are served by Puget Sound Energy and Seattle City Light.

  14. Assessment of Energy Impact of Window Technologies for Commercial Buildings

    E-Print Network [OSTI]

    Hong, Tianzhen

    2014-01-01T23:59:59.000Z

    electrochromic windows were technically successful, but it will take a number of years for significant market

  15. Cosmic Microwave Background Anisotropy Window Functions Revisited

    E-Print Network [OSTI]

    Lloyd Knox

    1999-09-28T23:59:59.000Z

    The primary results of most observations of cosmic microwave background (CMB) anisotropy are estimates of the angular power spectrum averaged through some broad band, called band-powers. These estimates are in turn what are used to produce constraints on cosmological parameters due to all CMB observations. Essential to this estimation of cosmological parameters is the calculation of the expected band-power for a given experiment, given a theoretical power spectrum. Here we derive the "band power" window function which should be used for this calculation, and point out that it is not equivalent to the window function used to calculate the variance. This important distinction has been absent from much of the literature: the variance window function is often used as the band-power window function. We discuss the validity of this assumed equivalence, the role of window functions for experiments that constrain the power in {\\it multiple} bands, and summarize a prescription for reporting experimental results. The analysis methods detailed here are applied in a companion paper to three years of data from the Medium Scale Anisotropy Measurement.

  16. Demonstration with Energy and Daylighting Assessment of Sunlight Responsive Thermochromic (SRT) Window Systems

    SciTech Connect (OSTI)

    Broekhuis, Michael; Liposcak, Curtis; Witte, Michael; Henninger, Robert; Zhou, Xiaohui; Petzen, George; Buchanan, Michael; Kumar, Sneh

    2012-03-31T23:59:59.000Z

    Pleotint, LLC was able to successfully extrude thermochromic interlayer for use in the fenestration industry. Pleotint has developed a thermochromic sytem that requires two thermochromic colors to make a neutral color when in the tinted state. These two colors were assembled into a single interlayer called a tri-layer prelam by Crown Operations for use in the glass lamination industry. Various locations, orientations, and constructions of thermochromic windows were studied with funds from this contract. Locations included Australia, California, Costa Rica, Indiana, Iowa, Mexico. Installed orientations included vertical and skylight glazing applications. Various constructions included monolithic, double pane, triple pane constructions. A daylighting study was conducted at LinEl Signature. LinEl Signature has a conference room with a sylight roof system that has a west orientation. The existing LinEl Signature conference room had constant tint 40% VLT transparent skylights. Irradiance meters were installed on the interior and exterior sides of a constant tint skylight. After a month and a half of data collection, the irradiance meters were removed and the constant tint skylights were replaced with Pleotint thermochromic skylight windows. The irradiance meters were reinstalled in the same locations and irradiance data was collected. Both data sets were compared. The data showed that there was a linear relationship with exterior and interior irradiance for the existing constant tint skylights. The thermochromic skylights have a non-linear relationship. The thermochromic skylights were able to limit the amount of irradiance that passed through the thermochromic skylight. A second study of the LinEl Signature conference was performed using EnergyPlus to calculate the amount of Illuminance that passed through constant tint skylights as compared to thermochromic skylights. The constant tint skylights transmitted Illuminance is 2.8 times higher than the thermochromic skylights during the months of May, June, July, August and 1.9 times higher than the thermochromic skylight during the months of March, April, September, October. Calculated illuminance levels were much more consistent as compared to the existing constant tint skylights installed at LinEl Signature. This allows for a more comfortable interior space in regard to glare discomfort and interior lighting control. Lawrence Berkeley National Laboratory was contracted to characterize the performance of the thermochromic interlayer and thermochromic window systems. Thermochromic interlayer was characterized with spectrometer equipment. The thermochromic window systems were characterized using LBNL’s Advanced Window Test Facility. A copy of the report can be found in the Appendix. Iowa State University was contracted to compare thermochromic window technology to constant tint technology. Iowa State University conducted the testing at the Energy Resource Station (ERS). The ERS has the ability to simultaneously test side-by-side competing building technologies. The building is equipped with two identical air handling units, each with its own dedicated and identical chiller. One air handling unit supplies the four test rooms designated as the A rooms and the other unit serves the four test rooms designated as the B rooms. There is one A test room and one B test rooms arranged as pairs in a side-by-side design with each pair having a different exposure. There is a pair of test rooms that face the south, an east and west facing pair. Each of the test rooms is a mirror image of its match with identical construction. The rooms are unoccupied; however, the capability to impose false loads on the rooms exists. The false loads and room lighting can be scheduled to simulate various usage patterns. A copy of the report can be found in the Appendix. GARD Analytics was contracted to compare EnergyPlus building simulations to the data recorded at the Iowa ERS. The goal of this research was to validate the building simulation software developed by the US Department of Energy. EnergyPlus is

  17. Apparatus for insulating windows and the like

    DOE Patents [OSTI]

    Mitchell, Robert A. (R.D. #1, Box 462-A, Voorheesville, NY 12186)

    1984-01-01T23:59:59.000Z

    Apparatus for insulating window openings through walls and the like includes a thermal shutter, a rail for mounting the shutter adjacent to the window opening and a coupling for connecting the shutter to the rail. The thermal shutter includes an insulated panel adhered to frame members which surround the periphery of the panel. The frame members include a hard portion for providing the frame and a soft portion for providing a seal with that portion of the wall adjacent to the periphery of the opening. The coupling means is preferably integral with the attachment rail. According to a preferred embodiment, the coupling means includes a continuous hinge of reduced thickness. The thermal shutter can be permanently attached, hinged, bi-folded, or sliding with respect to the window and wall. A distribution method is to market the apparatus in "kit" form.

  18. Charlotte-Mecklenburg Storm Water Hidden Valley Ecological Garden

    E-Print Network [OSTI]

    Charlotte-Mecklenburg Storm Water Hidden Valley Ecological Garden Stream and Floodplain Restoration Project Report of 2005 Project Activities to Mecklenburg County Storm Water Services and Water Quality habitat is often inhibited by a lack of organic matter in the soils of restoration project sites, organic

  19. Fermilab, Indiana University Horn Optimization for nuSTORM

    E-Print Network [OSTI]

    McDonald, Kirk

    Fermilab, Indiana University Horn Optimization for nuSTORM HPTW 05/21/2014 Fermilab, Indiana University Ao Liu* A. Bross, D. Neuffer Fermilab, Indiana University *www.frankliuao.com/research.html #12;Fermilab, Indiana University WHO WE ARE, WHAT WE DO nuSTORM Overview 5/23/2014 Ao Liu 1 #12;Fermilab

  20. Solar optical materials for innovative window design

    SciTech Connect (OSTI)

    Lampert, C.M.

    1982-08-01T23:59:59.000Z

    New and innovative optical materials and coatings can greatly improve the efficiency of window energy systems. These potential materials and coatings increase energy efficiency by reducing radiative losses in the infrared, or reducing visible reflection losses or controlling overheating due to solar gain. Current progress in heat mirror coatings for glass and polymeric substrates is presented. Highly doped semiconducting oxides and metal/dielectric interference coatings are reviewed. Physical and optical properties are outlined for antireflection films and transparent aerogel insulation media. The potential for optical switching films as window elements includes discussions of electrochromic, photochromic and other physical switching processes.

  1. Energy-Efficient Windows | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelinesProvedDecember 2005DepartmentDecember 2011District |Department ofEnergy andWindowWindows

  2. Physics of the Earth and Planetary Interiors 153 (2005) 12 Studies of the Earth's Deep Interior--Eighth Symposium

    E-Print Network [OSTI]

    Garnero, Ed

    Physics of the Earth and Planetary Interiors 153 (2005) 1­2 Editorial Studies of the Earth's Deep Interior--Eighth Symposium The Eighth Symposium on the Study of the Earth's Deep Interior (SEDI) was held. On this occasion attention was also turned to the deep interior of other planets as well as the Earth. To decipher

  3. The Current T2K Beam Window

    E-Print Network [OSTI]

    McDonald, Kirk

    Downstream Helium velocity 5 m/s Heat transfer coefficient 150 W/m2K #12;Helium flow grooves He in He out at KEK (via Oak Ridge via PSI). #12;Assembled Window #12;Remote Handling #12;Remote handling Monitor Chamber (Canada) Target Station (Japan) #12;Remote installation #12;Stress analysis and upgrade potential

  4. Occupant Response to Window Control Signaling Systems

    E-Print Network [OSTI]

    Ackerly, Katherine

    2012-01-01T23:59:59.000Z

    preventing energy waste during the red light mode is a moregreen lights was installed to help avoid energy waste, or inlight means that energy is being used to modify the temparature inside and therefore if I open my window it will waste energy.  

  5. Highly Insulating Residential Windows Using Smart Automated Shading...

    Office of Environmental Management (EM)

    The windows will function autonomously and in a networked configuration. Project Impact LBNL is aiming toward a mature market cost increment of 12ft2 of window. LBNL will also...

  6. Energy Efficiency Hits from the Doors (and Windows) | Department...

    Broader source: Energy.gov (indexed) [DOE]

    Energy Efficiency Hits from the Doors (and Windows) Energy Efficiency Hits from the Doors (and Windows) December 5, 2011 - 5:31am Addthis Ernie Tucker Editor, National Renewable...

  7. Infrared Thermography Measurements of Window Thermal Test Specimen Surface Temperatures

    E-Print Network [OSTI]

    Infrared Thermography Measurements of Window Thermal Test Specimen Surface Temperatures Brent T Temperatures of Window Specimens: Infrared Thermography Laboratory Measurements Brent T. Griffith1 , Howdy and cold sides, respectively. Surface temperature maps were compiled using an infrared thermographic system

  8. INTERIOR-POINT METHODS FOR NONCONVEX NONLINEAR ...

    E-Print Network [OSTI]

    2005-11-04T23:59:59.000Z

    Nov 4, 2005 ... where x ? Rn are the decision variables, f : Rn ? R is the objective function, ... problem is not convex, the algorithm will be searching for a local optimum. ..... the terms in the barrier objective of our infeasible interior-point method. ..... In order to enter dual feasibility restoration mode, we monitored the ...

  9. The Solar Interior Paul Bushby (Newcastle University)

    E-Print Network [OSTI]

    Haase, Markus

    The Solar Interior Paul Bushby (Newcastle University) STFC Introductory Course in Solar System. Solar rotation and large-scale flows 3. The solar cycle 4. Solar dynamo theory 5. Open questions Sunday, 5 September 2010 #12;1. Basic properties of the Sun Right: A recent image from the Solar Dynamics

  10. Solar Storm Risks for Maine and the New England Electric Grid,

    E-Print Network [OSTI]

    Schrijver, Karel

    Solar Storm Risks for Maine and the New England Electric Grid, and Potential Protective Measures.resilientsocieties.org #12;1 EXECUTIVE SUMMARY A severe solar storm--a historical example being the Carrington Event of 1859 of the eastern United States. Severe solar storms--of the intensity of the 1921 New York Central Storm

  11. Nondetection of impulsive radio signals from lightning in Martian dust storms using the radar receiver on

    E-Print Network [OSTI]

    Gurnett, Donald A.

    emission from a Martian dust storm that they attribute to the excitation of Schumann [1952] resonances

  12. Window and Envelope Technologies Overview - 2014 BTO Peer Review...

    Energy Savers [EERE]

    Research and Development Roadmap: Windows and Building Envelope Research & Development Roadmap: Emerging Water Heating Technologies Research & Development Roadmap: Emerging HVAC...

  13. The Impact of Overhang Design on the Performance of Electrochromic Windows

    E-Print Network [OSTI]

    Tavil, Aslihan; Lee, Eleanor S.

    2005-01-01T23:59:59.000Z

    Issues for Large-area Electrochromic Windows in CommercialAnalysis of Prototype Electrochromic Windows”, ASHRAEon the Performance of Electrochromic Windows Asilhan Tavil

  14. The energy-savings potential of electrochromic windows in the US commercial buildings sector

    E-Print Network [OSTI]

    Lee, Eleanor; Yazdanian, Mehry; Selkowitz, Stephen

    2004-01-01T23:59:59.000Z

    Alone Photovoltaic-Powered Electrochromic Smart Window.Subject responses to electrochromic windows. To be publishedAnalysis of Prototype Electrochromic Windows, ASHRAE

  15. End User Impacts of Automated Electrochromic Windows in a Pilot Retrofit Application

    E-Print Network [OSTI]

    Lee, Eleanor S.

    2014-01-01T23:59:59.000Z

    2006. Advancement of electrochromic windows: Final report.User Impacts of Automated Electrochromic Windows in a Pilotenergy performance of electrochromic windows controlled for

  16. AEROSPACE TECHNOLOGY REVIEW FOR LBL WINDOW/PASSIVE SOLAR PROGRAM FINAL REPORT

    E-Print Network [OSTI]

    Viswanathan, R.

    2011-01-01T23:59:59.000Z

    TI Reflective Solar Control Film on Windows Gains AcceptancelReflective Solar Control Film on Windows Gains Acceptance",optical window shutter, the cholesteric liquid crystal film

  17. Performance Criteria for Residential Zero Energy Windows

    SciTech Connect (OSTI)

    Arasteh, Dariush; Goudey, Howdy; Huang, Joe; Kohler, Christian; Mitchell, Robin

    2006-10-09T23:59:59.000Z

    This paper shows that the energy requirements for today's typical efficient window products (i.e. ENERGY STAR{trademark} products) are significant when compared to the needs of Zero Energy Homes (ZEHs). Through the use of whole house energy modeling, typical efficient products are evaluated in five US climates and compared against the requirements for ZEHs. Products which meet these needs are defined as a function of climate. In heating dominated climates, windows with U-factors of 0.10 Btu/hr-ft{sup 2}-F (0.57 W/m{sup 2}-K) will become energy neutral. In mixed heating/cooling climates a low U-factor is not as significant as the ability to modulate from high SHGCs (heating season) to low SHGCs (cooling season).

  18. End User Impacts of Automated Electrochromic Windows in a Pilot

    E-Print Network [OSTI]

    LBNL-6027E End User Impacts of Automated Electrochromic Windows in a Pilot Retrofit Application E Electrochromic Windows in a Pilot Retrofit Application Eleanor S. Lee1 Abstract , Erin S. Claybaugh Building Independence Avenue, S.W., Washington, DC 20585 USA Automated electrochromic (EC) windows, advanced thermally

  19. AGENDA ADEP Surface Water Protection Project NPDES Storm Water...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ADEP Surface Water Protection Project NPDES Storm Water Individual Permit Bi-Annual Update Public Meeting January 22, 2014 5:30-7:30 p.m. Cities of Gold Conference Center...

  20. Applicability of radar observations to the prediction of storm runoff

    E-Print Network [OSTI]

    Johnson, Odell Monroe

    2012-06-07T23:59:59.000Z

    of Depaverne. (Yiembe~ 1967 (Yonwh) (Yea ) ABSTRACT Rainfall-runoff relaL'ronships fox 18 storms over the Little Nashita River basin in Oklahoma are studied in order to develop a method for predicting storm losses based on weather-radar observational..., for the use of their computer facilities. Credit is due Mr. M. A. Hartman, Chief Research Engineer, Agricultural Research Service, Chickasha, Oklahoma, for his assistance in obtaining treamflow and rainfall data from records maintained by the Agricultural...

  1. Red Storm usage model :Version 1.12.

    SciTech Connect (OSTI)

    Jefferson, Karen L.; Sturtevant, Judith E.

    2005-12-01T23:59:59.000Z

    Red Storm is an Advanced Simulation and Computing (ASC) funded massively parallel supercomputer located at Sandia National Laboratories (SNL). The Red Storm Usage Model (RSUM) documents the capabilities and the environment provided for the FY05 Tri-Lab Level II Limited Availability Red Storm User Environment Milestone and the FY05 SNL Level II Limited Availability Red Storm Platform Milestone. This document describes specific capabilities, tools, and procedures to support both local and remote users. The model is focused on the needs of the ASC user working in the secure computing environments at Los Alamos National Laboratory (LANL), Lawrence Livermore National Laboratory (LLNL), and SNL. Additionally, the Red Storm Usage Model maps the provided capabilities to the Tri-Lab ASC Computing Environment (ACE) requirements. The ACE requirements reflect the high performance computing requirements for the ASC community and have been updated in FY05 to reflect the community's needs. For each section of the RSUM, Appendix I maps the ACE requirements to the Limited Availability User Environment capabilities and includes a description of ACE requirements met and those requirements that are not met in that particular section. The Red Storm Usage Model, along with the ACE mappings, has been issued and vetted throughout the Tri-Lab community.

  2. The Unexpected 2012 Draconid Meteor Storm

    E-Print Network [OSTI]

    Ye, Quanzhi; Brown, Peter G; Campbell-Brown, Margaret D; Weryk, Robert J

    2013-01-01T23:59:59.000Z

    An unexpected intense outburst of the Draconid meteor shower was detected by the Canadian Meteor Orbit Radar (CMOR) on October 8, 2012. The peak flux occurred at ~16:40 UT on October 8 with a maximum of 2.4 +/- 0.3 hr-1 km-2 (appropriate to meteoroid mass larger than 10-7 kg), equivalent to a ZHRmax = 9000 +/- 1000 using 5-minute intervals, using a mass distribution index of s = 1.88 +/- 0.01 as determined from the amplitude distribution of underdense Draconid echoes. This makes the out- burst among the strongest Draconid returns since 1946 and the highest flux shower since the 1966 Leonid meteor storm, assuming a constant power-law distribution holds from radar to visual meteoroid sizes. The weighted mean geocentric radiant in the time interval of 15-19h UT, Oct 8, 2012 was {\\alpha}g = 262.4 +/- 0.1 deg, {\\delta}g = 55.7 +/- 0.1 deg (epoch J2000.0). Visual observers also reported increased activity around the peak time, but with a much lower rate (ZHR 200), suggesting that the magnitude-cumulative num- ber r...

  3. Text-Alternative Version: LEDs for Interior Office Applications

    Broader source: Energy.gov [DOE]

    Below is the text-alternative version of the LEDs for Interior Office Applications webcast, held March 18, 2010.

  4. Interior Architecture Minor Tracking Sheet Total Minimum Credits: 26

    E-Print Network [OSTI]

    Interior Architecture Minor Tracking Sheet Total Minimum Credits: 26 Minor standing is prerequisite architecture studio course is required for architecture majors enrolled in the interior architecture minor (1 is required for Architecture majors): IARC 484 Interior Design Studio (6), IARC 486 Furniture

  5. Lazy Generation of Building Interiors in Realtime Carleton University

    E-Print Network [OSTI]

    Whitehead, Anthony

    Lazy Generation of Building Interiors in Realtime Evan Hahn Carleton University e-mail: ehahn interiors for the player to ex- plore. Automatic real-time building interior generation can provide a means of entry through every visible door in a virtual world. We present a novel approach to generate virtual

  6. Recent advances in modeling stellar interiors (u)

    SciTech Connect (OSTI)

    Guzik, Joyce Ann [Los Alamos National Laboratory

    2010-01-01T23:59:59.000Z

    Advances in stellar interior modeling are being driven by new data from large-scale surveys and high-precision photometric and spectroscopic observations. Here we focus on single stars in normal evolutionary phases; we will not discuss the many advances in modeling star formation, interacting binaries, supernovae, or neutron stars. We review briefly: (1) updates to input physics of stellar models; (2) progress in two and three-dimensional evolution and hydrodynamic models; (3) insights from oscillation data used to infer stellar interior structure and validate model predictions (asteroseismology). We close by highlighting a few outstanding problems, e.g., the driving mechanisms for hybrid {gamma} Dor/{delta} Sct star pulsations, the cause of giant eruptions seen in luminous blue variables such as {eta} Car and P Cyg, and the solar abundance problem.

  7. Geology of interior cratonic sag basins

    SciTech Connect (OSTI)

    Leighton, M.W.; Eidel, J.J.; Kolata, D.R.; Oltz, D.F. (Illinois Geological Survey, Champaign (USA))

    1990-05-01T23:59:59.000Z

    Interior cratonic sag basins are thick accumulations of sediment, generally more or less oval in shape, located entirely in the interiors of continental masses. Some are single-cycle basins and others are characterized by repeated sag cycles or are complex polyhistory basins. Many appear to have developed over ancient rift systems. Interior cratonic sag basins are typified by a dominance of flexural over fault-controlled subsidence, and a low ratio of sediment volume to surface area of the basin. The Baltic, Carpentaria, Illinois, Michigan, Parana, Paris, and Williston basins are examples of interior cratonic sag basins. Tectonics played a dominant role in controlling the shapes and the geometries of the juxtaposed packets of sedimentary sequences. While the mechanics of tectonic control are not clear, evidence suggests that the movements are apparently related to convergence of lithospheric plates and collision and breakup of continents. Whatever the cause, tectonic movements controlled the freeboard of continents, altering base level and initiating new tectono-sedimentologic regimes. Sag basins situated in low latitudes during their development commonly were sites of thick carbonates (e.g., Illinois, Michigan, Williston, and Paris basins). In contrast, siliciclastic sedimentation characterized basins that formed in higher latitudes (e.g., Parana and Carpentaria basins). Highly productive sag basins are characterized by widespread, mature, organic-rich source rocks, large structures, and good seals. Nonproductive basins have one or more of the following characteristics: immature source rocks, leaky plumbing, freshwater flushing, and/or complex geology due to numerous intrusions that inhibit mapping of plays.

  8. Monitored Energy Performance of Electrochromic Windows Controlled for Daylight and Visual Comfort

    E-Print Network [OSTI]

    Lee, Eleanor S.; DiBartolomeo, Dennis L.; Klems, Joseph; Yazdanian, Mehry; Selkowitz, Stephen E.

    2005-01-01T23:59:59.000Z

    absorptive electrochromic (EC) windows tested were market-electrochromic windows that were deemed sufficiently mature for market

  9. Monitored Energy Performance of Electrochromic Windows Controlled for Daylight and Visual Comfort

    E-Print Network [OSTI]

    Lee, Eleanor S.; DiBartolomeo, Dennis L.; Klems, Joseph; Yazdanian, Mehry; Selkowitz, Stephen E.

    2005-01-01T23:59:59.000Z

    Subject responses to electrochromic windows. Submitted toin a full-scale electrochromic window testbed. Technicaloptimization of electrochromic operations for occupant

  10. List of Windows Incentives | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpInc Place:KeystoneSolarList ofPassiveMachine ControlsWindows

  11. Lighting energy savings potential of split-pane electrochromic windows controlled for daylighting with visual comfort

    SciTech Connect (OSTI)

    Software, Anyhere; Fernandes, Luis; Lee, Eleanor; Ward, Greg

    2013-03-15T23:59:59.000Z

    A simulation study was conducted to evaluate lighting energy savings of split-pane electrochromic (EC) windows controlled to satisfy key visual comfort parameters. Using the Radiance lighting simulation software, interior illuminance and luminance levels were computed for a south-facing private office illuminated by a window split into two independently-controlled EC panes. The transmittance of these was optimized hourly for a workplane illuminance target while meeting visual comfort constraints, using a least-squares algorithm with linear inequality constraints. Blinds were successively deployed until visual comfort criteria were satisfied. The energy performance of electrochromics proved to be highly dependent on how blinds were controlled. With hourly blind position adjustments, electrochromics showed significantly higher (62percent and 53percent, respectively without and with overhang) lighting energy consumption than clear glass. With a control algorithm designed to better approximate realistic manual control by an occupant, electrochromics achieved significant savings (48percent and 37percent, respectively without and with overhang). In all cases, energy consumption decreased when the workplace illuminance target was increased. In addition, the fraction of time during which the occupant had an unobstructed view of the outside was significantly greater with electrochromics: 10 months out of the year versus a handful of days for the reference case.

  12. Developing Low-Conductance Window Frames: Capabilities and Limitations of Current Window Heat Transfer Design Tools

    E-Print Network [OSTI]

    Transfer Design Tools Arild Gustavsen1,* , Dariush Arasteh2 , Bjørn Petter Jelle3,4 , Charlie Curcija5-conductance window frames requires accurate simulation tools for product research and development. Based and develop recommendation for inclusion into the design fenestration tools. 3. Assess existing correlations

  13. Energy Efficient Electrochromic Windows Incorporating Ionic Liquids

    SciTech Connect (OSTI)

    Cheri Boykin; James Finley; Donald Anthony; Julianna Knowles; Richard Markovic; Michael Buchanan; Mary Ann Fuhry; Lisa Perrine

    2008-11-30T23:59:59.000Z

    One approach to increasing the energy efficiency of windows is to control the amount of solar radiation transmitted through a window by using electrochromic technology. What is unique about this project is that the electrochromic is based on the reduction/oxidation reactions of cathodic and anodic organic semi-conducting polymers using room temperature ionic liquids as ion transport electrolytes. It is believed that these types of coatings would be a lower cost alternative to traditional all inorganic thin film based electrochromic technologies. Although there are patents1 based on the proposed technology, it has never been reduced to practice and thoroughly evaluated (i.e. durability and performance) in a window application. We demonstrate that by using organic semi-conductive polymers, specific bands of the solar spectrum (specifically visible and near infrared) can be targeted for electrochemical variable transmittance responsiveness. In addition, when the technology is incorporated into an insulating glass unit, the energy parameters such as the solar heat gain coefficient and the light to solar gain ratio are improved over that of a typical insulating glass unit comprised of glass with a low emissivity coating. A minimum of {approx}0.02 quads of energy savings per year with a reduction of carbon emissions for electricity of {approx}320 MKg/yr benefit is achieved over that of a typical insulating glass unit including a double silver low-E coating. Note that these values include a penalty in the heating season. If this penalty is removed (i.e. in southern climates or commercial structures where cooling is predominate year-round) a maximum energy savings of {approx}0.05 quad per year and {approx}801 MKg/yr can be achieved over that of a typical insulating glass unit including a double silver low-E coating. In its current state, the technology is not durable enough for an exterior window application. The primary downfall is that the redox chemistry fails to recover to a bleached state upon exposure to heat and solar radiation while being cycled over time from the bleached to the dark state. Most likely the polymers are undergoing degradation reactions which are accelerated by heat and solar exposure while in either the reduced or oxidized states and the performance of the polymers is greatly reduced over time. For this technology to succeed in an exterior window application, there needs to be more work done to understand the degradation of the polymers under real-life application conditions such as elevated temperatures and solar exposure so that recommendations for improvements in to the overall system can be made. This will be the key to utilizing this type of technology in any future real-life applications.

  14. Measure Guideline: Energy-Efficient Window Performance and Selection

    SciTech Connect (OSTI)

    Carmody, J.; Haglund, K.

    2012-11-01T23:59:59.000Z

    This document provides guidelines for the selection of energy-efficient windows in new and existing residential construction in all US climate zones. It includes information on window products, their attributes and performance. It provides cost/benefit information on window energy savings as well as information on non-energy benefits such as thermal comfort and reduced HVAC demands. The document also provides information on energy impacts of design decisions such as window orientation, total glazing area and shading devices and conditions. Information on resources for proper window installation is included as well. This document is for builders, homeowners, designers and anyone making decisions about selecting energy efficient window. It is intended to complement other Building America information and efforts.

  15. Stand-alone photovoltaic (PV) powered electrochromic window

    DOE Patents [OSTI]

    Benson, David K. (Golden, CO); Crandall, Richard S. (Boulder, CO); Deb, Satyendra K. (Boulder, CO); Stone, Jack L. (Lakewood, CO)

    1995-01-01T23:59:59.000Z

    A variable transmittance double pane window includes an electrochromic material that has been deposited on one pane of the window in conjunction with an array of photovoltaic cells deposited along an edge of the pane to produce the required electric power necessary to vary the effective transmittance of the window. A battery is placed in a parallel fashion to the array of photovoltaic cells to allow the user the ability to manually override the system when a desired transmittance is desired.

  16. Stand-alone photovoltaic (PV) powered electrochromic window

    DOE Patents [OSTI]

    Benson, D.K.; Crandall, R.S.; Deb, S.K.; Stone, J.L.

    1995-01-24T23:59:59.000Z

    A variable transmittance double pane window includes an electrochromic material that has been deposited on one pane of the window in conjunction with an array of photovoltaic cells deposited along an edge of the pane to produce the required electric power necessary to vary the effective transmittance of the window. A battery is placed in a parallel fashion to the array of photovoltaic cells to allow the user the ability to manually override the system when a desired transmittance is desired. 11 figures.

  17. Highly Insulating Windows Volume Purchase Program Final Report

    SciTech Connect (OSTI)

    Parker, Graham B.; Mapes, Terry S.; Zalis, WJ

    2013-02-01T23:59:59.000Z

    This report summarizes the Highly Insulating Windows Volume Purchase Program, conduced by PNNL for DOE-BTP, including a summary of outcomes and lessons learned.

  18. A Design Guide for Early-Market Electrochromic Windows

    E-Print Network [OSTI]

    2006-01-01T23:59:59.000Z

    of a thin-film ceramic electrochromic window: Field studywindows in a bleached state (left) or colored state (right). Electrochromic coatings (EC) are switchable thin-film

  19. The robust vehicle routing problem with time windows

    E-Print Network [OSTI]

    Agostinho Agra

    2012-10-02T23:59:59.000Z

    Oct 2, 2012 ... Abstract: This paper addresses the robust vehicle routing problem with time windows. We are motivated by a problem that arises in maritime ...

  20. Robust Inventory Routing with Flexible Time Window Allocation

    E-Print Network [OSTI]

    Chengliang Zhang

    2015-01-15T23:59:59.000Z

    Jan 15, 2015 ... Abstract: This paper studies a robust maritime inventory routing problem with time windows and stochastic travel times. One of the novelties of ...

  1. Impacts of Operating Hardware on Window Thermal Performance

    E-Print Network [OSTI]

    Hart, Robert

    2014-01-01T23:59:59.000Z

    and Renewable Energy, Office of Building Technology,Building Technologies Program of the U.S. Department ofproject ”Improved Window Technologies for Energy Efficient

  2. Isocurvature forecast in the anthropic axion window

    E-Print Network [OSTI]

    J. Hamann; S. Hannestad; G. G. Raffelt; Y. Y. Y. Wong

    2009-06-16T23:59:59.000Z

    We explore the cosmological sensitivity to the amplitude of isocurvature fluctuations that would be caused by axions in the "anthropic window" where the axion decay constant f_a >> 10^12 GeV and the initial misalignment angle Theta_i << 1. In a minimal Lambda-CDM cosmology extended with subdominant scale-invariant isocurvature fluctuations, existing data constrain the isocurvature fraction to alpha < 0.09 at 95% C.L. If no signal shows up, Planck can improve this constraint to 0.042 while an ultimate CMB probe limited only by cosmic variance in both temperature and E-polarisation can reach 0.017, about a factor of five better than the current limit. In the parameter space of f_a and H_I (Hubble parameter during inflation) we identify a small region where axion detection remains within the reach of realistic cosmological probes.

  3. MAVIS III -- A Windows 95/NT Upgrade

    SciTech Connect (OSTI)

    Hardwick, M.F. [Sandia National Labs., Livermore, CA (United States). GTS Engineering Dept.

    1997-12-01T23:59:59.000Z

    MAVIS (Modeling and Analysis of Explosive Valve Interactions) is a computer program that simulates operation of explosively actuated valve. MAVIS was originally written in Fortran in the mid 1970`s and was primarily run on the Sandia Vax computers in use through the early 1990`s. During the mid to late 1980`s MAVIS was upgraded to include the effects of plastic deformation and it became MAVIS II. When the Vax computers were retired, the Gas Transfer System (GTS) Development Department ported the code to the Macintosh and PC platforms, where it ran as a simple console application. All graphical output was lost during these ports. GTS code developers recently completed an upgrade that provides a Windows 95/NT MAVIS application and restores all of the original graphical output. This upgrade is called MAVIS III version 1.0. This report serves both as a user`s manual for MAVIS III v 1.0 and as a general software development reference.

  4. Managing coherence via put/get windows

    DOE Patents [OSTI]

    Blumrich, Matthias A. (Ridgefield, CT); Chen, Dong (Croton on Hudson, NY); Coteus, Paul W. (Yorktown Heights, NY); Gara, Alan G. (Mount Kisco, NY); Giampapa, Mark E. (Irvington, NY); Heidelberger, Philip (Cortlandt Manor, NY); Hoenicke, Dirk (Ossining, NY); Ohmacht, Martin (Yorktown Heights, NY)

    2011-01-11T23:59:59.000Z

    A method and apparatus for managing coherence between two processors of a two processor node of a multi-processor computer system. Generally the present invention relates to a software algorithm that simplifies and significantly speeds the management of cache coherence in a message passing parallel computer, and to hardware apparatus that assists this cache coherence algorithm. The software algorithm uses the opening and closing of put/get windows to coordinate the activated required to achieve cache coherence. The hardware apparatus may be an extension to the hardware address decode, that creates, in the physical memory address space of the node, an area of virtual memory that (a) does not actually exist, and (b) is therefore able to respond instantly to read and write requests from the processing elements.

  5. Simulating Complex Window Systems using BSDF Data

    SciTech Connect (OSTI)

    Konstantoglou, Maria; Jonsson, Jacob; Lee, Eleanor

    2009-06-22T23:59:59.000Z

    Nowadays, virtual models are commonly used to evaluate the performance of conventional window systems. Complex fenestration systems can be difficult to simulate accurately not only because of their geometry but also because of their optical properties that scatter light in an unpredictable manner. Bi-directional Scattering Distribution Functions (BSDF) have recently been developed based on a mixture of measurements and modelling to characterize the optics of such systems. This paper describes the workflow needed to create then use these BSDF datasets in the Radiance lighting simulation software. Limited comparisons are made between visualizations produced using the standard ray-tracing method, the BSDF method, and that taken in a full-scale outdoor mockup.

  6. Porting salinas to the windows platform.

    SciTech Connect (OSTI)

    Reese, Garth M.; Wilson, Christopher Riley

    2006-06-01T23:59:59.000Z

    The ASC program has enabled significant development of high end engineering applications on massively parallel machines. There is a great benefit in providing these applications on the desktop of the analysts and designers, at least insofar as the small models may be run on these platforms, thus providing a tool set that spans the application needs. This effort documents the work of porting Salinas to the WINDOWS{trademark} platform. Selection of the tools required to compile, link, test and run Salinas in this environment is discussed. Significant problems encountered along the way are listed along with an estimation of the overall cost of the port. This report may serve as a baseline for streamlining further porting activities with other ASC codes.

  7. Managing coherence via put/get windows

    DOE Patents [OSTI]

    Blumrich, Matthias A. (Ridgefield, CT); Chen, Dong (Croton on Hudson, NY); Coteus, Paul W. (Yorktown Heights, NY); Gara, Alan G. (Mount Kisco, NY); Giampapa, Mark E. (Irvington, NY); Heidelberger, Philip (Cortlandt Manor, NY); Hoenicke, Dirk (Ossining, NY); Ohmacht, Martin (Yorktown Heights, NY)

    2012-02-21T23:59:59.000Z

    A method and apparatus for managing coherence between two processors of a two processor node of a multi-processor computer system. Generally the present invention relates to a software algorithm that simplifies and significantly speeds the management of cache coherence in a message passing parallel computer, and to hardware apparatus that assists this cache coherence algorithm. The software algorithm uses the opening and closing of put/get windows to coordinate the activated required to achieve cache coherence. The hardware apparatus may be an extension to the hardware address decode, that creates, in the physical memory address space of the node, an area of virtual memory that (a) does not actually exist, and (b) is therefore able to respond instantly to read and write requests from the processing elements.

  8. INTEGRATED ENERGY EFFICIENT WINDOW-WALL SYSTEMS

    SciTech Connect (OSTI)

    Michael Arney, Ph.D.

    2002-12-31T23:59:59.000Z

    The building industry faces the challenge of reducing energy use while simultaneously improving construction methods and marketability. This paper describes the first phase of a project to address these concerns by designing an Integrated Window Wall System (IWWS) that can be commercialized. This work builds on previous research conducted during the 1990's by Lawrence Berkeley national Laboratories (LBNL). During this phase, the objective was to identify appropriate technologies, problems and issues and develop a number of design concepts. Four design concepts were developed into prototypes and preliminary energy analyses were conducted Three of these concepts (the foam wall, steel wall, and stiffened plate designs) showed particular potential for meeting the project objectives and will be continued into a second phase where one or two of the systems will be brought closer to commercialization.

  9. Lightning location characteristics and vertical structure analysis of isolated storm cells in the TOGA COARE region

    E-Print Network [OSTI]

    Barnaby, Stephen Andrew

    1995-01-01T23:59:59.000Z

    producing storm cells, and non-lightning producing cells over the tropical oceans. The characteristics of lightning locations with respect to radar reflectivity were also examined. Lightning characteristics of flashes associated with TOGA COARE storm cells...

  10. E-Print Network 3.0 - agricultural storm runoff Sample Search...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    18 O, and Silica Dynamics for Two Storms at Five... flow were due primarily to new rainwater proportions of storm ... Source: McDonnell, Jeffrey J. - Department of Forest...

  11. Spatial patterns of ice storm disturbance in the forested landscape of Ouachita Mountains, Arkansas and Oklahoma

    E-Print Network [OSTI]

    Isaacs, Rachel E.

    2009-05-15T23:59:59.000Z

    Large-extent ice storms have received relatively little attention from researchers. This research investigates the effects of abiotic and biotic factors on the spatial patterns of ice storm disturbance on a forested landscape. This investigation...

  12. Integrated impact analysis of yellow-dust storms : a regional case study in China

    E-Print Network [OSTI]

    Ai, Ning, 1978-

    2003-01-01T23:59:59.000Z

    The dust storm is a meteorological event that is caused by strong winds and proceeds from arid and semi-arid regions, transporting a thick cloud of fine sediments. In China, the sediments of dust storms mainly come from ...

  13. EI2 Insulation Helps Anxious Pooch Find Calm in the Storm | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    EI2 Insulation Helps Anxious Pooch Find Calm in the Storm EI2 Insulation Helps Anxious Pooch Find Calm in the Storm Photo of a dog sitting on a bed or couch with a stuffed toy in...

  14. Memorandum of Understanding between the Dept. of Interior and...

    Broader source: Energy.gov (indexed) [DOE]

    by the U.S. Department of Energy and the U.S. Department of the Interior to support offshore wind and marine and hydrokinetic technologies. mouoffshorewindhydrokineticdeploym...

  15. Volatiles as a link between planetary interiors and the environment

    E-Print Network [OSTI]

    Black, Benjamin A. (Benjamin Alexander)

    2013-01-01T23:59:59.000Z

    Volatiles derived from planetary interiors influence magma evolution and environmental processes. Over appropriate timescales, Earth's mantle, crust, ocean, and atmosphere constitute coupled systems. The apparently synchronous ...

  16. Optimization Online - Active-set prediction for interior point methods ...

    E-Print Network [OSTI]

    Coralia Cartis

    2014-05-18T23:59:59.000Z

    May 18, 2014 ... Abstract: We propose the use of controlled perturbations to address the challenging question of optimal active-set prediction for interior point ...

  17. Numerical experiments with an interior-exterior point method for ...

    E-Print Network [OSTI]

    2004-06-30T23:59:59.000Z

    The latter converges due to the information car- ried by the vector of the Lagrange multipliers y. The interior point method, which has global convergence

  18. Information Geometry and Interior-Point Algorithms in SDP and ...

    E-Print Network [OSTI]

    Satoshi Kakihara, Atsumi Ohara, Takashi Tsuchiya

    2011-10-11T23:59:59.000Z

    Sep 30, 2011 ... Page 1 ... Interplay between interior-point methods and differential geometry is an interesting topic studied by several authors. It was shown in ...

  19. Impact of a major ice storm on an old-growth hardwood forest

    E-Print Network [OSTI]

    Lechowicz, Martin J.

    forestière, produc- tivité forestière. [Traduit par la Rédaction] Hooper et al. 75 Introduction Ice storms litter produced by ice storms is a substantial, yet little studied, pool of energy, car- bonImpact of a major ice storm on an old-growth hardwood forest Michael C. Hooper, Ken Arii

  20. Improvement in urban storm water management: analysing the innovation process through the three

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    SOYER 1 Improvement in urban storm water management: analysing the innovation process through to associate hard sciences and social sciences. Keywords Storm water management; observatories; innovation management is a good example: inefficient water networks in the city (regarding waste water as well as storm

  1. Greenland's Pressure Drag and the Atlantic Storm Track THOMAS JUNG

    E-Print Network [OSTI]

    Greenland's Pressure Drag and the Atlantic Storm Track THOMAS JUNG European Centre for Medium of Greenland on the Northern Hemisphere wintertime circulation are discussed. Inviscid pressure drag on Greenland's slopes, calculated from reanalysis data, is related to circulation patterns. Greenland lies

  2. QUICK GUIDES UCF 2010-1 Caring for Storm-

    E-Print Network [OSTI]

    utility lines." Downed utility lines should be reported to utility companies or 911 operators. He adds a major storm, city officials, utility workers and private tree care firms must first focus on dealing· with a listing in the phone book, usually under "Tree Service." Ask to see current certificates of insurance

  3. Record-breaking Storm Activity on Uranus in 2014

    E-Print Network [OSTI]

    de Pater, Imke; Fry, P M; Hammel, Heidi B; Baranec, Christoph; Sayanagi, Kunio

    2015-01-01T23:59:59.000Z

    In spite of an expected decline in convective activity following the 2007 equinox of Uranus, eight sizable storms were detected on the planet with the near-infrared camera NIRC2, coupled to the adaptive optics system, on the 10-m W. M. Keck telescope on UT 5 and 6 August 2014. All storms were on Uranus's northern hemisphere, including the brightest storm ever seen in this planet at 2.2 $\\mu$m, reflecting 30% as much light as the rest of the planet at this wavelength. The storm was at a planetocentric latitude of $\\sim$15$^{\\circ}$N and reached altitudes of $\\sim$330 mbar, well above the regular uppermost cloud layer (methane-ice) in the atmosphere. A cloud feature at a latitude of 32$^{\\circ}$N, that was deeper in the atmosphere (near $\\sim$2 bar), was later seen by amateur astronomers. We also present images returned from our HST ToO program, that shows both of these cloud features. We further report the first detection of a long-awaited haze over the north polar region.

  4. STORM in Monte Carlo reactor physics calculations KAUR TUTTELBERG

    E-Print Network [OSTI]

    Haviland, David

    STORM in Monte Carlo reactor physics calculations KAUR TUTTELBERG Master of Science Thesis Carlo reactor physics criticality calculations. This is achieved by optimising the number of neutron for more efficient Monte Carlo reactor physics calculations, giving results with errors that can

  5. Radiation-transparent windows, method for imaging fluid transfers

    DOE Patents [OSTI]

    Shu, Deming (Darien, IL); Wang, Jin (Burr Ridge, IL)

    2011-07-26T23:59:59.000Z

    A thin, x-ray-transparent window system for environmental chambers involving pneumatic pressures above 40 bar is presented. The window allows for x-ray access to such phenomena as fuel sprays injected into a pressurized chamber that mimics realistic internal combustion engine cylinder operating conditions.

  6. Avalanches through windows: Multiscale visualization in magnetic thin films

    E-Print Network [OSTI]

    Sethna, James P.

    Avalanches through windows: Multiscale visualization in magnetic thin films Alessandro Magni, Cornell University, Ithaca, NY 14853-2501 Abstract--The dynamics of domain walls motion in thin films dynamics, but are strongly dependent on the size of the windows chosen. Here we investigate how to properly

  7. Benefits of Windows Small Business Server Code Name "Aurora"

    E-Print Network [OSTI]

    Hunt, Galen

    Benefits of Windows Small Business Server Code Name "Aurora" includes: Daily automatic backups Business Server Code Name "Aurora" provides an easy-to-use solution ideal for first server small businesses with up to 25 users, Windows Small Business Server Code Name "Aurora" provides a cost-effective and easy

  8. Validation of the Window Model of the Modelica Buildings Library

    E-Print Network [OSTI]

    LBNL-5735E Validation of the Window Model of the Modelica Buildings Library Thierry Stephane MODEL OF THE MODELICA BUILDINGS LIBRARY Thierry Stephane Nouidui, Michael Wetter, and Wangda Zuo the validation of the window model of the free open-source Modelica Buildings library. This paper starts

  9. Budget Windows, Sunsets and Fiscal Control Alan J. Auerbach

    E-Print Network [OSTI]

    Sadoulet, Elisabeth

    Budget Windows, Sunsets and Fiscal Control Alan J. Auerbach University of California, Berkeley have struggled to find the right method of controlling public spending and budget deficits. In recent years, the United States has evaluated policy changes using a ten-year budget window. The use of a multi

  10. Boron nitride protective coating of beryllium window surfaces

    SciTech Connect (OSTI)

    Gmuer, N.F.

    1991-12-01T23:59:59.000Z

    The use of beryllium windows on white synchrotron radiation beamlines is constrained by the fact that the downstream surfaces of these windows should not be exposed to ambient atmosphere. They should, rather, be protected by a tail-piece under vacuum or containing helium atmosphere. This tailpiece is typically capped by Kapton (3M Corporation, St. Paul, MN) or aluminum foil. The reason for such an arrangement is due to the health risk associated with contaminants (BeO) which from on the exposed beryllium window surfaces and due to possible loss of integrity of the windows. Such a tail-piece may, however, add unwanted complications to the beamline in the form of vacuum pumps or helium supplies and their related monitoring systems. The Kapton windows may burn through in the case of high intensity beams and lower energy radiation may be absorbed in the case of aluminum foil windows. A more ideal situation would be to provide a coating for the exposed beryllium window surface, sealing it off from the atmosphere, thus preventing contamination and/or degradation of the window, and eliminating the need for helium or vacuum equipment.

  11. 9A.2 FORECAST CHALLENGES AT THE NWS STORM PREDICTION CENTER RELATING TO THE FREQUENCY OF FAVORABLE SEVERE STORM ENVIRONMENTS

    E-Print Network [OSTI]

    to the performance of convective watches issued by the NOAA Storm Prediction Center (SPC layer bulk wind shear, are linked to SPC convective watches and verification metrics forecast performance. 2. SPC CONVECTIVE WATCHES A convective watch is issued by the SPC

  12. Photographs of the Exterior and Interior of the Lab Homes Appendix B -Photographs of the Exterior and Interior of the

    E-Print Network [OSTI]

    Complete with Disconnect and Utility-Provided Smart Meter #12;B.4 Figure B.1. Window on West End of Home B

  13. Demographic Window, H. G. Muller et al. 1 Demographic Window to Aging in the Wild: Constructing Life

    E-Print Network [OSTI]

    Müller, Hans-Georg

    Demographic Window, H. G. M¨uller et al. 1 Demographic Window to Aging in the Wild: Constructing for wild populations. A demographic key identity is established that leads to a method whereby age identity is established for the continuous case where the survival schedule of the wild population

  14. Dynamics of window glass fracture in explosions

    SciTech Connect (OSTI)

    Beauchamp, E.K.; Matalucci, R.V.

    1998-05-01T23:59:59.000Z

    An exploratory study was conducted under the Architectural Surety Program to examine the possibility of modifying fracture of glass in the shock-wave environment associated with terrorist bombings. The intent was to explore strategies to reduce the number and severity of injuries resulting from those attacks. The study consisted of a series of three experiments at the Energetic Materials Research and Testing Center (EMRTC) of the New Mexico Institute of Mining and Technology at Socorro, NM, in which annealed and tempered glass sheets were exposed to blast waves at several different levels of overpressure and specific impulse. A preliminary assessment of the response of tempered glass to the blast environment suggested that inducing early failure would result in lowering fragment velocity as well as reducing the loading from the window to the structure. To test that possibility, two different and novel procedures (indentation flaws and spot annealing) were used to reduce the failure strength of the tempered glass while maintaining its ability to fracture into small cube-shaped fragments. Each experiment involved a comparison of the performance of four sheets of glass with different treatments.

  15. InterIor DesIgn CERTIFICATE PROGRAM

    E-Print Network [OSTI]

    Fork, Richard

    sketchUp Your Design 12 hours, $325 Learn to build computer generated models of interior spaces with ease in this hands-on opportunity to utilize Google SketchUp to convey your design ideas and boost your design and developing interior spaces in detail. Google SketchUp is a free download at www.sketchup.google.com. topics

  16. Empirical assessment of a prismatic daylight-redirecting window film in a full-scale office testbed

    E-Print Network [OSTI]

    Thanachareonkit, Anothai

    2014-01-01T23:59:59.000Z

    of a microstructured prismatic window film in deep open plandaylight- redirecting window film in a full-scale officedaylight- redirecting window film in a full-scale office

  17. Experimental evaluation of the in-plane seismic behavior of store-front window systems

    E-Print Network [OSTI]

    Eva, Charles Almond

    2009-01-01T23:59:59.000Z

    was conducted. The window film (WF) series included 5’x5’damage states. When the window film is attached using theThe safety aspects of window film were very evident during

  18. ENERGY EFFICIENT WINDOWS PROGRAM. CHAPTER FROM THE ENERGY AND ENVIRONMENT DIVISION ANNUAL REPORT 1979

    E-Print Network [OSTI]

    Berman, S.

    2013-01-01T23:59:59.000Z

    Replacing window glass with a thin plastic film coated to beof windows can be improved with the use of thin-film coat-windows, the coating can be deposited directly on glass or on plastic films

  19. U-032: Microsoft Security Bulletin Windows TCP/IP MS11-083 -...

    Broader source: Energy.gov (indexed) [DOE]

    Server 2003 Service Pack 2 Windows Server 2003 x64 Edition Service Pack 2 Active Directory Windows Server 2003 with SP2 for Itanium-based Systems Windows Vista Service Pack 2...

  20. Experimental and Numerical Examination of the Thermal Transmittance of High Performance Window Frames

    E-Print Network [OSTI]

    Gustavsen Ph.D., Arild

    2010-01-01T23:59:59.000Z

    windows are often called passive -house wind ows, as windowse window frames, like passive-house windows. In this p aperare supposed to satisfy the Passive house requirements of

  1. Ultra high vacuum broad band high power microwave window

    DOE Patents [OSTI]

    Nguyen-Tuong, Viet (Seaford, VA); Dylla, III, Henry Frederick (Yorktown, VA)

    1997-01-01T23:59:59.000Z

    An improved high vacuum microwave window has been developed that utilizes high density polyethylene coated on two sides with SiOx, SiNx, or a combination of the two. The resultant low dielectric and low loss tangent window creates a low outgassing, low permeation seal through which broad band, high power microwave energy may be passed. No matching device is necessary and the sealing technique is simple. The features of the window are broad band transmission, ultra-high vacuum compatibility with a simple sealing technique, low voltage standing wave ratio, high power transmission and low cost.

  2. Ultra high vacuum broad band high power microwave window

    DOE Patents [OSTI]

    Nguyen-Tuong, V.; Dylla, H.F. III

    1997-11-04T23:59:59.000Z

    An improved high vacuum microwave window has been developed that utilizes high density polyethylene coated on two sides with SiOx, SiNx, or a combination of the two. The resultant low dielectric and low loss tangent window creates a low outgassing, low permeation seal through which broad band, high power microwave energy may be passed. No matching device is necessary and the sealing technique is simple. The features of the window are broad band transmission, ultra-high vacuum compatibility with a simple sealing technique, low voltage standing wave ratio, high power transmission and low cost. 5 figs.

  3. Photo of the Week: The First Energy-Efficient Dual-Paned Windows...

    Broader source: Energy.gov (indexed) [DOE]

    Lab helped develop the first energy-efficient dual-paned windows, now used in buildings and homes worldwide for billions of dollars in energy savings. Current windows...

  4. State-of-the-Art Highly Insulating Window Frames - Research and Market Review

    E-Print Network [OSTI]

    Gustavsen, Arild

    2008-01-01T23:59:59.000Z

    through vacuum and electrochromic vacuum glazed windows,technologies, such as an electrochromic vacuum glazedof rebate depth on an electrochromic vacuum glazed window.

  5. Monitored Energy Performance of Electrochromic Windows Controlled for Daylight and Visual Comfort

    E-Print Network [OSTI]

    Lee, Eleanor S.; DiBartolomeo, Dennis L.; Klems, Joseph; Yazdanian, Mehry; Selkowitz, Stephen E.

    2005-01-01T23:59:59.000Z

    Windows Controlled for Daylight and Visual Comfort Eleanorof means to bring in daylight while minimizing window glare.was controlled to admit daylight while the lower zone was

  6. Switchable window based on electrochromic polymers Chunye Xu,a)

    E-Print Network [OSTI]

    Taya, Minoru

    Switchable window based on electrochromic polymers Chunye Xu,a) Lu Liu, Susan E. Legenski, Dai Ning March 2004) A large contrast ratio (> 60%) and rapid switching (0.3­1 s) electrochromic (EC) polymer

  7. Hydrogen Safety Project: Chemical analysis support task. Window ``E`` analyses

    SciTech Connect (OSTI)

    Jones, T.E.; Campbell, J.A.; Hoppe, E.W.; Greenwood, L.R.; Gillespie, B.M.

    1992-09-01T23:59:59.000Z

    Core samples taken from tank 101-SY at Hanford during ``window E`` were analyzed for organic and radiochemical constituents by staff of the Analytical Chemistry Laboratory at Pacific Northwest Laboratory. Westinghouse Hanford company submitted these samples to the laboratory.

  8. A Design Guide for Early-Market Electrochromic Windows

    SciTech Connect (OSTI)

    Lee, Eleanor S.; Selkowitz, Stephen E.; Clear, Robert D.; DiBartolomeo, Dennis L.; Klems, Joseph H.; Fernandes, Luis L.; Ward, GregJ.; Inkarojrit, Vorapat; Yazdanian, Mehry

    2006-05-01T23:59:59.000Z

    Switchable variable-tint electrochromic (EC) windows preserve view out while modulating transmitted light, glare, and solar heat gains. Consumers will require objective information on the risks and benefits of this emerging technology as it enters the market in 2006. This guide provides such information and data derived from a wide variety of simulations, laboratory tests, and a 2.5-year field test of prototype large-area EC windows evaluated under outdoor sun and sky conditions. This design guide is provided to architects, engineers, building owners, and others interested in electrochromic windows. The design guide provides basic information about what is an electrochromic window, what it looks like, how fast does it switch, and what current product offerings are. The guide also provides information on performance benefits if more mature product offerings were available.

  9. Building America Expert Meeting: Windows Options for New and...

    Broader source: Energy.gov (indexed) [DOE]

    The NorthernSTAR Building America Partnership held an Expert Meeting on Windows Options for New and Existing Homes on November 14, 2011 at the Nolte Building on the campus of the...

  10. Pennsylvania: New Series of Windows Has Potential to Save Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    windows such as the OptiQ(tm) provide commercial building owners and operators with more energy efficient options to reduce heating and cooling expenses. The introduction of the...

  11. Performance Testing of Window Installation and Flashing Details

    E-Print Network [OSTI]

    Weston, T. A.; Herrin, J.

    2002-01-01T23:59:59.000Z

    and proposed installation practices incorporating new flashing materials. This paper focuses specifically on the installation practices relating to windows with mounting fins or flanges. REVIEW OF CURRENT PRACTICES AND ATTITUDES Interviews with builders... into two categories based on the how the flashing and the rough opening is treated. g167g32 2-Dimensional Methods: using flashing to extend protection around the perimeter of the window flanges on to the face of the sheathing, and g167g32 3...

  12. Improving the thermal performance of the US residential window stock

    SciTech Connect (OSTI)

    Brown, R.E.; Arasteh, D.K.; Eto, J.H.

    1992-05-01T23:59:59.000Z

    Windows have typically been the least efficient thermal component in the residential envelope, but technology advances over the past decade have helped to dramatically improve the energy efficiency of window products. While the thermal performance of these advanced technology windows can be easily characterized for a particular building application, few precise estimates exist of their aggregate impact on national or regional energy use. Policy-makers, utilities, researchers and the fenestration industry must better understand these products` ultimate conservation potential in order to determine the value of developing new products and initiating programs to accelerate their market acceptance. This paper presents a method to estimate the conservation potential of advanced window technologies, combining elements of two well-known modeling paradigms: supply curves of conserved energy and residential end-use forecasting. The unique features include: detailed descriptions of the housing stock by region and vintage, state-of-the-art thermal descriptions of window technologies, and incorporation of market effects to calculate achievable conservation potential and timing. We demonstrate the methodology by comparing, for all new houses built between 1990 and 2010, the conservation potential of very efficient, high R-value ``superwindows`` in the North Central federal region and spectrally-selective low-emissivity (moderate Revalue and solar transmittance) windows in California.

  13. Performance of a multifunctional PV/T hybrid solar window

    SciTech Connect (OSTI)

    Davidsson, Henrik; Perers, Bengt; Karlsson, Bjoern [Energy and Building Design, Lund University, P.O. Box 118, SE 221 00 Lund (Sweden)

    2010-03-15T23:59:59.000Z

    A building-integrated multifunctional PV/T solar window has been developed and evaluated. It is constructed of PV cells laminated on solar absorbers placed in a window behind the glazing. To reduce the cost of the solar electricity, tiltable reflectors have been introduced in the construction to focus radiation onto the solar cells. The reflectors render the possibility of controlling the amount of radiation transmitted into the building. The insulated reflectors also reduce the thermal losses through the window. A model for simulation of the electric and hot water production was developed. The model can perform yearly energy simulations where different features such as shading of the cells or effects of the glazing can be included or excluded. The simulation can be run with the reflectors in an active, up right, position or in a passive, horizontal, position. The simulation program was calibrated against measurements on a prototype solar window placed in Lund in the south of Sweden and against a solar window built into a single family house, Solgaarden, in Aelvkarleoe in the central part of Sweden. The results from the simulation shows that the solar window annually produces about 35% more electric energy per unit cell area compared to a vertical flat PV module. (author)

  14. Interior cavern conditions and salt fall potential

    SciTech Connect (OSTI)

    Munson, D.E.; Molecke, M.A. [Sandia National Labs., Albuquerque, NM (United States); Myers, R.E. [Strategic Petroleum Reserve, New Orleans, LA (United States)

    1998-03-01T23:59:59.000Z

    A relatively large number of salt caverns are used for fluid hydrocarbon storage, including an extensive set of facilities in the Gulf Coast salt domes for the Strategic Petroleum Reserve (SPR) Program. Attention is focused on the SPR caverns because of available histories that detail events involving loss and damage of the hanging string casing. The total number of events is limited, making the database statistically sparse. The occurrence of the events is not evenly distributed, with some facilities, and some caverns, more susceptible than others. While not all of these events could be attributed to impacts from salt falls, many did show the evidence of such impacts. As a result, a study has been completed to analyze the potential for salt falls in the SPR storage caverns. In this process, it was also possible to deduce some of the cavern interior conditions. Storage caverns are very large systems in which many factors could possibly play a part in casing damage. In this study, all of the potentially important factors such as salt dome geology, operational details, and material characteristics were considered, with all being logically evaluated and most being determined as secondary in nature. As a result of the study, it appears that a principal factor in determining a propensity for casing damage from salt falls is the creep and fracture characteristics of salt in individual caverns. In addition the fracture depends strongly upon the concentration of impurity particles in the salt. Although direct observation of cavern conditions is not possible, the average impurity concentration and the accumulation of salt fall material can be determined. When this is done, there is a reasonable correlation between the propensity for a cavern to show casing damage events and accumulation of salt fall material. The accumulation volumes of salt fall material can be extremely large, indicating that only a few of the salt falls are large enough to cause impact damage.

  15. Lab 3 GEO 465/565 Storm Water Pollution

    E-Print Network [OSTI]

    Wright, Dawn Jeannine

    on a location, the elevation will be displayed in the Identify results window. 2. How high are the mountains nutrients, microorganisms, hazardous chemicals, sediments and debris into our coastal waters. This discharge amounts of mud and terrestrial sediments in the plume reflected the sunlight, reducing the amount of light

  16. Geophysical evolution of planetary interiors and surfaces : Moon & Mars

    E-Print Network [OSTI]

    Evans, Alexander Joseph

    2013-01-01T23:59:59.000Z

    The interiors and surfaces of the terrestrial planetary bodies provide us a unique opportunity to gain insight into planetary evolution, particularly in the early stages subsequent to accretion. Both Mars and the Moon are ...

  17. Observing Healthcare Interior Environments and the Effect on Patient Behavior

    E-Print Network [OSTI]

    Rice, Courtney R.

    2010-07-14T23:59:59.000Z

    variables in the interior environments that have the greatest impact, whether positive or negative, on patients. The methods used to perform this research include: inspections of the facility, observations, and surveys. By combining all of these methods...

  18. Active-set prediction for interior point methods 

    E-Print Network [OSTI]

    Yan, Yiming

    2015-07-01T23:59:59.000Z

    This research studies how to efficiently predict optimal active constraints of an inequality constrained optimization problem, in the context of Interior Point Methods (IPMs). We propose a framework based on shifting/perturbing ...

  19. Edens islands rooms : the project of the urban interior

    E-Print Network [OSTI]

    Mahindroo, Amrita

    2011-01-01T23:59:59.000Z

    The privately owned public interior, defined here as an enclosed urban space owned by a private entity, has been a recurrent character of many 20th century liberal cities. It has today found an epitome in the mega-structural ...

  20. Hypervelocity impacts and the evolution of planetary surfaces and interiors

    E-Print Network [OSTI]

    Watters, Wesley Andrés, 1976-

    2009-01-01T23:59:59.000Z

    The thesis consists of five studies relating impact processes to the evolution of planetary interiors as well as impact structures on planetary surfaces. Chapter 2 is concerned with developing methods for estimating the ...

  1. Evaluation of charred porous polymers as a method of storm water pollution prevention for shipyards

    SciTech Connect (OSTI)

    Clark, G.E.

    1998-08-01T23:59:59.000Z

    Most shipyards have viable Best Management Practices (BMPs) in place to mitigate the transport of heavy metals to surface waters by storm water. Despite aggressive efforts to control storm water, shipyards have come under increased regulatory pressure to further reduce concentrations of heavy metals, such as copper and nickel, in storm water discharges. The tightening of regulatory requirements warrants research into additional BMPs. The objectives of this research project were to: (1) determine the feasibility of placing a replaceable cartridge of adsorbent material within a storm water collection system; and (2) evaluate two commercially available charred porous polymer adsorbents for the removal of heavy metals from storm water. The results indicated that there are commercially available storm water treatment components which could be adapted to house a cartridge of porous adsorbent material.

  2. Impact of microphysical parameterizations on simulated storm evolution and remotely-sensed characteristics

    E-Print Network [OSTI]

    Hristova-Veleva, Svetla M.

    of the storm structure. The dynamics, kinematics, thermodynamics, and the distribution of water in the storm were strongly altered by the inclusion of ice processes in the simulation of a supercell storm (Johnson et al., 1993). More importantly, the ice—phase... cover extensive areas and play important roles in determining the overall heat budgets. Moreover, the importance of ice-phase microphysics increases the longer a system persists (Tao et al., 1989a). Hence, a proper representation of the large, long...

  3. Tracking Severe Weather Storms in Doppler Radar Images D. Cheng 1 , R. E. Mercer 1 , J. L. Barron 1 and P. Joe 2

    E-Print Network [OSTI]

    Barron, John

    meteorologist's perception. 1 Introduction Because of the devastation caused by severe storms, the forecasting we have developed an automatic storm tracking system. Tracking past storm movement is a prerequisite to forecasting future storm movement and minimizing property damage. Physically, a storm is an area of updraft

  4. Matlab for PhD students Basics 1 WS 2010/11 Matlab windows

    E-Print Network [OSTI]

    Kretzberg, Jutta

    Matlab for PhD students ­ Basics 1 ­ WS 2010/11 Matlab windows The matlab desktop can be edited and brought back with the "Desktop" menu, the windows can be docked and undocked from the main Matlab window -> Default · Command window o Issues commands to Matlab for processing o >> means that Matlab is ready

  5. File:Texas NOI for Storm Water Discharges Associated with Construction...

    Open Energy Info (EERE)

    title environmental protection Author Janet Wyman Storm Water and Pretreatment Team Wastewater Permitting Section Water Quality Division TCEQ Texas Commission on Environmental...

  6. NuSTORM {\\mu} Ring -- Design and Injection Optimization

    E-Print Network [OSTI]

    Neuffer, David; Bross, A

    2015-01-01T23:59:59.000Z

    The design of the NuSTORM muon production beam line and storage ring is discussed. The facility includes a pion production target station with a pion collection horn and transport into a straight section of a storage ring. {\\pi} decay within that straight section provides {\\mu}'s that are stored within the ring for subsequent decay providing precision electron and muon neutrino beams. The ring and transport designs are described and optimized. Genetic Algorithm optimization of the horn and transport into the ring has been performed, providing a significant increase in intensity

  7. STORM/PALM - Super Resolution Fluorescence Microscope | EMSL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar HomePromisingStoriesSANDIA REPORTSORNRecoverynaturalSTORM/PALM - Super

  8. Managing Storm Aftermath in Alabama | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion | Department of Energy Low-TemperatureEnergy Maine09 BalanceStorage andManaging Storm

  9. Storm Lake I Wind Farm | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revisionEnvReviewNonInvasiveExplorationUT-g GrantAtlas (PACAOpen Energy InformationStony Creek Wind FarmStorm

  10. Exploiting hyper-sparsity when computing preconditioners for conjugate gradients in interior point methods

    E-Print Network [OSTI]

    Hall, Julian

    for conjugate gradients in interior point methods 1 #12;Hyper-sparsity in operations with B-1 Represent B-1 computing preconditioners for conjugate gradients in interior point methods 3 #12;Interior point methods computing preconditioners for conjugate gradients in interior point methods 4 #12;Design

  11. Assessment of Environmentally Friendly Refrigerants for Window Air Conditioners

    SciTech Connect (OSTI)

    Bansal, Pradeep [ORNL] [ORNL; Shen, Bo [ORNL] [ORNL

    2014-01-01T23:59:59.000Z

    This paper presents technical assessment of environmentally friendly refrigerants for window air conditioners that currently use refrigerant R410A for residential and commercial applications. The alternative refrigerants that are studied for its replacement include R32, R600a, R290, R1234yf, R1234ze and a mixture of R32 (90% molar concentration) and R125 (10% molar concentration). Baseline experiments were performed on a window unit charged with R410A. The ORNL Heat Pump Design Model was calibrated with the baseline data and was used to assess the comparative performance of the WAC with alternative refrigerants. The paper discusses the advantages and disadvantages of each refrigerants and their suitability for window air conditioners.

  12. Method of making an integral window hermetic fiber optic component

    DOE Patents [OSTI]

    Dalton, Rick D. (Miamisburg, OH); Kramer, Daniel P. (Centerville, OH); Massey, Richard T. (Hamilton, OH); Waker, Damon A. (Bellbrook, OH)

    1996-11-12T23:59:59.000Z

    In the fabrication of igniters, actuators, detonators, and other pyrotechnic devices to be activated by a laser beam, an integral optical glass window is formed by placing a preform in the structural member of the device and then melting the glass and sealing it in place by heating at a temperature between the ceramming temperature of the glass and the melting point of the metal, followed by rapid furnace cooling to avoid devitrification. No other sealing material is needed to achieve hermeticity. A preferred embodiment of this type of device is fabricated by allowing the molten glass to flow further and form a plano-convex lens integral with and at the bottom of the window. The lens functions to decrease the beam divergence caused by refraction of the laser light passing through the window when the device is fired by means of a laser beam.

  13. Method of making an integral window hermetic fiber optic component

    DOE Patents [OSTI]

    Dalton, R.D.; Kramer, D.P.; Massey, R.T.; Waker, D.A.

    1996-11-12T23:59:59.000Z

    In the fabrication of igniters, actuators, detonators, and other pyrotechnic devices to be activated by a laser beam, an integral optical glass window is formed by placing a preform in the structural member of the device and then melting the glass and sealing it in place by heating at a temperature between the ceramming temperature of the glass and the melting point of the metal, followed by rapid furnace cooling to avoid devitrification. No other sealing material is needed to achieve hermeticity. A preferred embodiment of this type of device is fabricated by allowing the molten glass to flow further and form a plano-convex lens integral with and at the bottom of the window. The lens functions to decrease the beam divergence caused by refraction of the laser light passing through the window when the device is fired by means of a laser beam. 9 figs.

  14. Optimized ECR plasma apparatus with varied microwave window thickness

    DOE Patents [OSTI]

    Berry, L.A.

    1995-11-14T23:59:59.000Z

    The present invention describes a technique to control the radial profile of microwave power in an ECR plasma discharge. In order to provide for a uniform plasma density to a specimen, uniform energy absorption by the plasma is desired. By controlling the radial profile of the microwave power transmitted through the microwave window of a reactor, the profile of the transmitted energy to the plasma can be controlled in order to have uniform energy absorption by the plasma. An advantage of controlling the profile using the window transmission characteristics is that variations to the radial profile of microwave power can be made without changing the microwave coupler or reactor design. 9 figs.

  15. Climate-driven increases in storm frequency simplify kelp forest food webs

    E-Print Network [OSTI]

    Cardinale, Bradley J.

    Climate-driven increases in storm frequency simplify kelp forest food webs J A R R E T T E . B Y R in the diversity and complexity of food webs of giant kelp forests, one of the most productive habitats on Earth. We demonstrate this by linking natural variation in storms with measured changes in kelp forest food

  16. UC Santa Cruz Storm Water SPRING 2010 Volume 2, Number 1

    E-Print Network [OSTI]

    California at Santa Cruz, University of

    : Environmental Programs Assistant for the UCSC Storm Water Management Program http://cleanwater.ucsc. edu Contact us at: cleanwater@ucsc.edu or (831) 459-4520 Storm Water Management on Construction Sites Control Plan (ESCP). The ESCP must use all applicable Best Management Practices from Appendix E. Appendix

  17. ANNUAL REPORT General Permit for the Discharger of Storm Water from Small Municipal Separate

    E-Print Network [OSTI]

    California at Santa Cruz, University of

    . These activities and structural improvements are referred to as Best Management Practices (BMPs). BMPs9/14/11 1 ANNUAL REPORT General Permit for the Discharger of Storm Water from Small Municipal. Permittee (Agency Name): University of California Santa Cruz 2. Contact Person: _Courtney Trask, Storm Water

  18. Water Quality and Hydrologic Performance of a Porous Asphalt Pavement as a Storm-Water

    E-Print Network [OSTI]

    examined the functionality of a porous pavement storm-water management system in coastal New Hampshire headings: Stormwater management; Runoff; Porous media; Pavements; Cold regions; Best Management Practice; Water quality; Water treatment. Author keywords: Storm-water management; Runoff; Porous pavements; Cold

  19. ANNUAL REPORT General Permit for the Discharger of Storm Water from Small Municipal Separate

    E-Print Network [OSTI]

    California at Santa Cruz, University of

    . These activities and structural improvements are referred to as Best Management Practices (BMPs). BMPs9/14/10 1 ANNUAL REPORT General Permit for the Discharger of Storm Water from Small Municipal. Permittee (Agency Name): University of California Santa Cruz 2. Contact Person: _Courtney Trask, Storm Water

  20. Storm Water Management through Infiltration Trenches1 Bhagu R. Chahar1

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    . An infiltration trench alone or in combination with other storm10 water management practice is a key element and the drain time of trench, which is a key15 parameter in operation of storm water management practice systems (SUDS), water sensitive38 urban design (WSUD), best management practices (BMP) or low impact urban

  1. ANNUAL REPORT General Permit for the Discharger of Storm Water from Small Municipal Separate

    E-Print Network [OSTI]

    California at Santa Cruz, University of

    , 2013 to June 30, 2014 (Year 5) The University of California at Santa Cruz's Storm Water Management improvements are referred to as Best Management Practices (BMPs). BMPs will be updated as appropriate1 ANNUAL REPORT General Permit for the Discharger of Storm Water from Small Municipal Separate

  2. Using CASA IP1 to Diagnose Kinematic and Microphysical Interactions in a Convective Storm

    E-Print Network [OSTI]

    Rutledge, Steven

    bulk hydrometeor identification and dual-Doppler wind retrievals. Comparisons are made with the nearby-band radars are used to observe a convective storm. A fuzzy logic hydrometeor identification algorithm the type of echoes in the network based on storm identification al- gorithms, then allocates radars

  3. STORM WATER POLLUTION PREVENTION PLAN BUILDING B51 AND BEVATRON DEMOLITION PROJECT

    E-Print Network [OSTI]

    STORM WATER POLLUTION PREVENTION PLAN FOR: BUILDING B51 AND BEVATRON DEMOLITION PROJECT PROJECT NO;Storm Water Pollution Prevention Plan (SWPPP) Building B51 and Bevatron Demolition Project Lawrence............................................................................................300-3 300.4 Project Schedule/Water Pollution Control Schedule

  4. Assessment of Inundation Risk from Sea Level Rise and Storm Surge in Northeastern Coastal National Parks

    E-Print Network [OSTI]

    Wang, Y.Q. "Yeqiao"

    Assessment of Inundation Risk from Sea Level Rise and Storm Surge in Northeastern Coastal National of inundation risk from sea level rise and storm surge in northeastern coastal national parks. Journal of Coastal Research, 00(0), 000­000. Coconut Creek (Florida), ISSN 0749-0208. Sea level rise and an increase

  5. 9.5 SPATIAL DISTRIBUTIONS OF TORNADIC NEAR-STORM ENVIRONMENTS BY CONVECTIVE MODE

    E-Print Network [OSTI]

    . Thompson* , Bryan T. Smith, and Andrew R. Dean NOAA/NWS/Storm Prediction Center Norman OK Patrick T. Marsh/NWS/NCEP/Storm Prediction Center, 120 David L. Boren Blvd., Norman, OK 73072; email: Richard.Thompson@noaa.gov. 1 #12

  6. TRMM precipitation bias in extreme storms in South America Kristen L. Rasmussen,1

    E-Print Network [OSTI]

    Houze Jr., Robert A.

    TRMM precipitation bias in extreme storms in South America Kristen L. Rasmussen,1 Stella L. Choi,1 June 2013; published 9 July 2013. [1] Deep convective storms in subtropical South America are some and subtropical South America. Recent studies have suggested that the Tropical Rainfall Measuring Mission (TRMM

  7. Field Evaluation of Low-E Storm S.C. Drumheller

    E-Print Network [OSTI]

    was performed in a cold climate. Six homes with single pane windows were monitored over the period of one inefficiency of single pane windows due to solar heat gain, poor insulating value, and air infiltration--combined with the large number of homes having single pane windows--creates a tremendous opportunity to provide energy

  8. Covered Product Category: Residential Windows, Doors, and Skylights

    Broader source: Energy.gov [DOE]

    FEMP provides acquisition guidance across a variety of product categories, including residential windows, doors, and skylights, which are an ENERGY STAR-qualified product category. Federal laws and requirements mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law.

  9. Laboratory Performance Testing of Residential Window Air Conditioners

    SciTech Connect (OSTI)

    Winkler, J.; Booten, C.; Christensen, D.; Tomerlin, J.

    2013-03-01T23:59:59.000Z

    Window air conditioners are the dominant cooling product for residences, in terms of annual unit sales. They are inexpensive, portable and can be installed by the owner. For this reason, they are an attractive solution for supplemental cooling, for retrofitting air conditioning into a home which lacks ductwork, and for renters. Window air conditioners for sale in the United States are required to meet very modest minimum efficiency standards. Four window air conditioners' performance were tested in the Advanced HVAC Systems Laboratory on NREL's campus in Golden, CO. In order to separate and study the refrigerant system's performance, the unit's internal leakage pathways, the unit's fanforced ventilation, and the leakage around the unit resulting from installation in a window, a series of tests were devised that focused on each aspect of the unit's performance. These tests were designed to develop a detailed performance map to determine whole-house performance in different climates. Even though the test regimen deviated thoroughly from the industry-standard ratings test, the results permit simple calculation of an estimated rating for both capacity and efficiency that would result from a standard ratings test. Using this calculation method, it was found that the three new air conditioners' measured performance was consistent with their ratings. This method also permits calculation of equivalent SEER for the test articles. Performance datasets were developed across a broad range of indoor and outdoor operating conditions, and used them to generate performance maps.

  10. Energy Gaining Windows for Residential Buildings Jesper Kragh, Assistant Professor,

    E-Print Network [OSTI]

    season. It is assumed that in northern cold climates all of the solar gain during the heating season can profiles, solar gain, net energy gain, low energy houses SUMMARY: This paper presents some of the research buildings. The net energy gain of windows is the solar gain minus the heat loss integrated over the heating

  11. Intermittent and sustained periodic windows in networked chaotic Rössler oscillators

    SciTech Connect (OSTI)

    He, Zhiwei; Sun, Yong [Wuhan Center for Magnetic Resonance, State Key Laboratory of Magnetic Resonance and Atomic and Molecular Physics, Wuhan Institute of Physics and Mathematics, Chinese Academy of Sciences, Wuhan 430071 (China) [Wuhan Center for Magnetic Resonance, State Key Laboratory of Magnetic Resonance and Atomic and Molecular Physics, Wuhan Institute of Physics and Mathematics, Chinese Academy of Sciences, Wuhan 430071 (China); University of the Chinese Academy of Sciences, Beijing 100049 (China); Zhan, Meng, E-mail: zhanmeng@wipm.ac.cn [Wuhan Center for Magnetic Resonance, State Key Laboratory of Magnetic Resonance and Atomic and Molecular Physics, Wuhan Institute of Physics and Mathematics, Chinese Academy of Sciences, Wuhan 430071 (China)] [Wuhan Center for Magnetic Resonance, State Key Laboratory of Magnetic Resonance and Atomic and Molecular Physics, Wuhan Institute of Physics and Mathematics, Chinese Academy of Sciences, Wuhan 430071 (China)

    2013-12-15T23:59:59.000Z

    Route to chaos (or periodicity) in dynamical systems is one of fundamental problems. Here, dynamical behaviors of coupled chaotic Rössler oscillators on complex networks are investigated and two different types of periodic windows with the variation of coupling strength are found. Under a moderate coupling, the periodic window is intermittent, and the attractors within the window extremely sensitively depend on the initial conditions, coupling parameter, and topology of the network. Therefore, after adding or removing one edge of network, the periodic attractor can be destroyed and substituted by a chaotic one, or vice versa. In contrast, under an extremely weak coupling, another type of periodic window appears, which insensitively depends on the initial conditions, coupling parameter, and network. It is sustained and unchanged for different types of network structure. It is also found that the phase differences of the oscillators are almost discrete and randomly distributed except that directly linked oscillators more likely have different phases. These dynamical behaviors have also been generally observed in other networked chaotic oscillators.

  12. Dell recommends Windows 7. Students get the best price

    E-Print Network [OSTI]

    Almor, Amit

    Dell recommends Windows® 7. Students get the best price on consumer PCs from Dell* If you find a better price on your day of purchase, contact a Dell University specialist and we will beat that price come in small packages. DellTM XPSTM 14z Dell University Price$ 99999 ® 7 Home Premium VV Get

  13. Windows on Computer Science Department of Computer and Information Science

    E-Print Network [OSTI]

    Fang, Shiaofen

    1 CSCI 120 Windows on Computer Science Department of Computer and Information Science IUPUI What is Computer Science? Is Computer Science the study of computers (Building computers, and writing computer programs) ? Computer Science is no more about computers than astronomy is about telescopes, or biology

  14. The In uence of Windowing on Time Delay Estimates

    E-Print Network [OSTI]

    Maryland at College Park, University of

    'Ruanaidh Siemens Corporate Research 755 College Road East Princeton , NJ 08540 rvbalan,rosca,rickard,oruanaidh@scr.siemens of frequencies. Such a relation holds true when the Fourier transform is used to go into the frequency domain. However, in practice, one has to use the windowed Fourier transform to obtain the frequency domain

  15. The Influence of Windowing on Time Delay Estimates

    E-Print Network [OSTI]

    Balan, Radu V.

    O'Ruanaidh Siemens Corporate Research 755 College Road East Princeton , NJ 08540 rvbalan,rosca,rickard,oruanaidh@scr.siemens of frequencies. Such a relation holds true when the Fourier transform is used to go into the frequency domain. However, in practice, one has to use the windowed Fourier transform to obtain the frequency domain

  16. Instruction-Window Power Reduction Using Data Dependence Metric

    E-Print Network [OSTI]

    Lee, Hsien-Hsin "Sean"

    power savings, and with an average performance loss of a very modest 1.9%. I. INTRODUCTION NewInstruction-Window Power Reduction Using Data Dependence Metric Ziad Youssfi and Michael Shanblatt Department of Electrical and Computer Engineering Michigan State University East Lansing, MI 48824 ziad

  17. OPERATING TEMPERATURE WINDOWS FOR FUSION REACTOR STRUCTURAL MATERIALS

    E-Print Network [OSTI]

    California at Los Angeles, University of

    OPERATING TEMPERATURE WINDOWS FOR FUSION REACTOR STRUCTURAL MATERIALS S.J. Zinkle1 and N.M. Ghoniem reactor structural materials: four reduced-activation structural materials (oxide-dispersion- strengthened operating temperature limit of structural materials is determined by one of four factors, all of which

  18. DO NOT INCLUDE: flatten cardboard staples, tape & envelope windows ok

    E-Print Network [OSTI]

    Wolfe, Patrick J.

    / bottles Metal items other than cans/foil Napkins Paper towels Plastic bags Plastic films Plastic utensilsDO NOT INCLUDE: flatten cardboard staples, tape & envelope windows ok Aerosol cans Books Bottle, PDAs, inkjet cartridges, CFL bulbs (cushioned, sealed in plastic) computers, printers, printer

  19. EMC PERSPECTIVE: THE POWER OF WINDOWS SERVER 2012 AND EMC

    E-Print Network [OSTI]

    Chaudhuri, Surajit

    EMC PERSPECTIVE: THE POWER OF WINDOWS SERVER 2012 AND EMC INFRASTRUCTURE FOR MICROSOFT PRIVATE and storage optimization features of intelligent storage arrays, such as the EMC® Symmetrix® VMAX® storage family, the EMC® VNX® series, and the EMC® Isilon® scale-out NAS family. With new technologies

  20. Thermal and Structural Analysis of Targets and Windows

    E-Print Network [OSTI]

    McDonald, Kirk

    Thermal and Structural Analysis of Targets and Windows Materials, Irradiation Data and Fracture) = EDD/Cp Applied Thermal Stress Pa CTE*E*DeltaT Thermal Resistance Rts=UTS/(CTE*E *DeltaT) Thermal Shock 1147 1.16E+09 0.984 7445 Candidate Materials - Young's Modulus, UTS, Delta T, Thermal Stress

  1. T-547: Microsoft Windows Human Interface Device (HID) Vulnerability

    Broader source: Energy.gov [DOE]

    Microsoft Windows does not properly warn the user before enabling additional Human Interface Device (HID) functionality over USB, which allows user-assisted attackers to execute arbitrary programs via crafted USB data, as demonstrated by keyboard and mouse data sent by malware on a Smartphone that the user connected to the computer.

  2. Internet Explorer 7 on Windows Vista: Obtaining MIT Certificates

    E-Print Network [OSTI]

    Barton, Paul I.

    : A separate certificate password is not necessary for IE7 on Vista; the certificate is protected by your web services at MIT with IE7 on Windows Vista, three types of MIT web certificates are needed: · MIT servers · MIT Client Certificate, needed in IE7 on Vista to generate the personal certificate · MIT

  3. The Sun's interior structure and dynamics, and the solar cycle

    E-Print Network [OSTI]

    Broomhall, A -M; Howe, R; Norton, A A; Thompson, M J

    2014-01-01T23:59:59.000Z

    The Sun's internal structure and dynamics can be studied with helioseismology, which uses the Sun's natural acoustic oscillations to build up a profile of the solar interior. We discuss how solar acoustic oscillations are affected by the Sun's magnetic field. Careful observations of these effects can be inverted to determine the variations in the structure and dynamics of the Sun's interior as the solar cycle progresses. Observed variations in the structure and dynamics can then be used to inform models of the solar dynamo, which are crucial to our understanding of how the Sun's magnetic field is generated and maintained.

  4. The SPC Storm-Scale Ensemble of Opportunity (SSEO): Overview and Results from the 2012 Hazardous Weather Testbed Spring Experiment

    E-Print Network [OSTI]

    The SPC Storm-Scale Ensemble of Opportunity (SSEO): Overview and Results from the 2012 Hazardous Prediction Center, Norman, OK Introduction The Storm Prediction Center (SPC) has developed a 7-member-scale models already available operationally to SPC. · provides a practical alternative to a formal storm

  5. Generation of graphitic soots by an urban fire storm

    SciTech Connect (OSTI)

    Fields, D.E.; Cole, L.L.

    1987-01-01T23:59:59.000Z

    We have obtained samples of aerosols deposited during the Hiroshima fire storm that was initiated by the atomic bomb detonated on August 6, 1945, from streaks of ''black rain'' found on a plaster wall. The artifact appears to contain aerosol particles that may be representative of the aerosols that may lead to a ''nuclear winter'' (Turco 1983). Gamma spectroscopy measurements indicate the presence of naturally-occurring radionuclides K-40, Ra-226, Ra-228, Th-232, and Th-234, along with the fission product, Cs-137. Sooty particles of varying sizes have been detected using optical photomicrography and examined using x-ray induced x-ray fluorescence. The elements Ca, Sr, Ba, Fe, and Zn, have been detected, and exhibit elemental composition ratios representative of Hiroshima soil. Particle composition and size studies indicate that the particle sizes have a mean diameter of 1.8 microns, and that 30% are less than 1 micron in mean diameter.

  6. 2011 Minerals Yearbook U.S. Department of the Interior

    E-Print Network [OSTI]

    Resources Ltd.). DuPont produced zircon from its heavy-mineral sands operation near Starke, FL. Iluka2011 Minerals Yearbook U.S. Department of the Interior U.S. Geological Survey ZIRCONIUM AND HAFNIUM. In 2011, although the global economy continued to struggle, consumption of zirconium ores and concentrates

  7. 2009 Minerals Yearbook U.S. Department of the Interior

    E-Print Network [OSTI]

    of australian company iluka resources Ltd.). duPont produced zircon from its heavy-mineral sands operation near2009 Minerals Yearbook U.S. Department of the Interior U.S. Geological Survey ZIRCONIUM AND HAFNIUM. in 2009, global economic conditions continued to depress zircon consumption. in response to decreased

  8. 2010 Minerals Yearbook U.S. Department of the Interior

    E-Print Network [OSTI]

    subsidiary of Australian company Iluka Resources Ltd.). DuPont produced zircon from its heavy-mineral sands2010 Minerals Yearbook U.S. Department of the Interior U.S. Geological Survey ZIRCONIUM AND HAFNIUM. In 2010, the global economy began to recover, and consumption of zirconium ores and concentrates increased

  9. AN INTERIOR-POINT METHOD FOR NONLINEAR OPTIMIZATION ...

    E-Print Network [OSTI]

    2014-10-23T23:59:59.000Z

    as possible from the algorithmic building blocks of standard interior-point ... the computation of the maximum step length and the usage of problem-tailored ..... the algorithm avoids to cross over points at which some problem data fails ...... This compression process requires energy that is taken from the gas of the network.

  10. aircraft interior materials: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    aircraft interior materials First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Standard Test Method to...

  11. The Fisheries of Norway UNITED STATES DEPARTMENT OF THE INTERIOR

    E-Print Network [OSTI]

    The Fisheries of Norway UNITED STATES DEPARTMENT OF THE INTERIOR FISH AND WILDLIFE SERVICE BUREAU 11 12 15 16 16 16 17 17 17 18 19 19 #12;The Fisheries of Norway By SID 'EY SHAPIRO Foreign Fisheries about 1.3 million tons annually between 1960 and 1964. Thes e landings make Norway the foremost fishing

  12. Behaviour of Magnetic Tubes in Neutron Star's Interior

    E-Print Network [OSTI]

    R. S. Singh; B. K. Sinha; N. K. Lohani

    2002-12-31T23:59:59.000Z

    It is found from Maxwell's equations that the magnetic field lines are good analogues of relativistic strings. It is shown that the super-conducting current in the neutron star's interior causes local rotation of magnetic flux tubes carrying quantized flux.

  13. 2007 Minerals Yearbook U.S. Department of the Interior

    E-Print Network [OSTI]

    parts per million (ppm), to thulium and lutetium, the least abundant rare-earth elements (REE) at about2007 Minerals Yearbook U.S. Department of the Interior U.S. Geological Survey RARE EARTHS May 2010 #12;RARE EARTHS--2007 60.1 RARE EARTHS By James B. Hedrick Domestic survey data and tables were

  14. 2010 Minerals Yearbook U.S. Department of the Interior

    E-Print Network [OSTI]

    million (ppm), to thulium and lutetium, the least abundant rare-earth elements (REE), at about 0.5 ppm, and thallium. Rare earths can be classified as either light rare-earth elements (LREE) or heavy rare-earth2010 Minerals Yearbook U.S. Department of the Interior U.S. Geological Survey RARE EARTHS [ADVANCE

  15. 2009 Minerals Yearbook U.S. Department of the Interior

    E-Print Network [OSTI]

    parts per million (ppm), to thulium and lutetium, the least abundant rare-earth elements (REE), at about be classified as either light rare-earth elements (LREE) or heavy rare-earth elements (HREE). This division2009 Minerals Yearbook U.S. Department of the Interior U.S. Geological Survey RARE EARTHS [ADVANCE

  16. 2011 Minerals Yearbook U.S. Department of the Interior

    E-Print Network [OSTI]

    not necessarily reflect trends in consumption. the rare earths are a moderately abundant group of 17 elements light rare-earth elements (LRee) or heavy rare-earth elements (hRee). the LRee include the lanthanide2011 Minerals Yearbook U.S. Department of the Interior U.S. Geological Survey RARE EARTHS [ADVANCE

  17. On the Implementation of Interior Point Decomposition Algorithms for ...

    E-Print Network [OSTI]

    2005-10-31T23:59:59.000Z

    Oct 31, 2005 ... Industrial Engineering and Management Science Technical Report 2005-04 ... We also describe our interior decomposition algorithms using the Jordan algebra operations. .... The theoretical analysis assumes taking fixed steps along the ..... portfolio vector, and by ˜r ? Rn the random vector of asset returns ...

  18. UNITED STATES DEPARTMENT OF THE INTERIOR FISH AND WILDLIFE SERVICE

    E-Print Network [OSTI]

    , smallmouth bass; crappie; bluegill, redear sunfish; channel cat:fish #12;State Name ARKANSAS - Cont. Lonoke'-'I' 'J UNITED STATES DEPARTMENT OF THE INTERIOR FISH AND WILDLIFE SERVICE BUREAU OF SPORT FISHERIES AND WILDLIFE Washington 25, D. C. Leaflet FL-41 Revised May 1959 LIST OF STATE FISH HATCHERIES

  19. Hydrogen Bonding Increases Packing Density in the Protein Interior

    E-Print Network [OSTI]

    Hydrogen Bonding Increases Packing Density in the Protein Interior David Schell,1,2 Jerry Tsai,1 J System Health Science Center, College Station, Texas 77843-1114 ABSTRACT The contribution of hydrogen to the stability, but experimental studies show that bury- ing polar groups, especially those that are hydrogen

  20. 2008 Minerals Yearbook U.S. Department of the Interior

    E-Print Network [OSTI]

    statistics and world tungsten concentrate production for 2008 and the previous 4 years are listed in table 1 for lead in bullets, shot, and other products. Tungsten chemicals are used to make catalysts, corrosion2008 Minerals Yearbook U.S. Department of the Interior U.S. Geological Survey TUNGSTEN October 2010

  1. 2007 Minerals Yearbook U.S. Department of the Interior

    E-Print Network [OSTI]

    statistics and world tungsten concentrate production for 2007 and the previous 4 years are listed in table 12007 Minerals Yearbook U.S. Department of the Interior U.S. Geological Survey TUNGSTEN May 2010 #12;TUNGSTEN--2007 79.1 TUNGSTEN By Kim B. Shedd Domestic survey data and tables were prepared by Danielle L

  2. 2005 Minerals Yearbook U.S. Department of the Interior

    E-Print Network [OSTI]

    2005 Minerals Yearbook TungsTen U.S. Department of the Interior U.S. Geological Survey #12;TungsTen--2005 79.1 TungsTen ByKimB.shedd Domestic survey data and tables were prepared by Amy C. Tolcin, statistical assistant, and the world production table was prepared by Glenn J. Wallace, international data

  3. 2006 Minerals Yearbook U.S. Department of the Interior

    E-Print Network [OSTI]

    , international data coordinator. No U.S. tungsten mine production was reported in 2006. U.S. supply of tungsten Service (FWS) granted final approval to four new tungsten shot products for hunting waterfowl and coots--iron-tungsten2006 Minerals Yearbook TUNGSTEN U.S. Department of the Interior U.S. Geological Survey April 2008

  4. 2010 Minerals Yearbook U.S. Department of the Interior

    E-Print Network [OSTI]

    with that of 2009. Salient U.S. tungsten statistics and world tungsten concentrate production for 20102010 Minerals Yearbook U.S. Department of the Interior U.S. Geological Survey TUNGSTEN [ADVANCE RELEASE] February 2012 #12;TUNGSTEN--2010 [ADVANCE RELEASE] 79.1 TUNGSTEN By Kim B. Shedd Domestic survey

  5. 2011 Minerals Yearbook U.S. Department of the Interior

    E-Print Network [OSTI]

    consumption increased significantly in 2011, as compared with that of 2010. World tungsten mine production. salient u.s. tungsten statistics and world tungsten concentrate production for 2007­11 are listed in table2011 Minerals Yearbook U.S. Department of the Interior U.S. Geological Survey TUNGSTEN [ADVANCE

  6. 2011 Minerals Yearbook U.S. Department of the Interior

    E-Print Network [OSTI]

    ); Oil-dri Corp. of america (fuller's earth); Texas Industries, Inc. (common clay and shale); Thiele2011 Minerals Yearbook U.S. Department of the Interior U.S. Geological Survey CLAY AND SHALE [ADVANCE RELEASE] May 2013 #12;Clay and Shale--2011 [adVanCe ReleaSe] 18.1 Clay and Shale By Robert l

  7. 2011 Minerals Yearbook U.S. Department of the Interior

    E-Print Network [OSTI]

    , electrowon, and secondary production. The United States fell to eighth ranked in copper smelter production2011 Minerals Yearbook U.S. Department of the Interior U.S. Geological Survey COPPER [ADVANCE RELEASE] July 2013 #12;Copper--2011 [ADVANCe reLeASe] 20.1 Copper By Daniel L. edelstein Domestic survey

  8. Experimental evaluation of 350 MHz RF accelerator windows for the low energy demonstration accelerator

    SciTech Connect (OSTI)

    Cummings, K.; Rees, D.; Roybal, W. [and others

    1997-09-01T23:59:59.000Z

    Radio frequency (RF) windows are historically a point where failure occurs in input power couplers for accelerators. To obtain a reliable, high-power, 350 MHz RF window for the Low Energy Demonstration Accelerator (LEDA) project of the Accelerator Production of Tritium program, RF windows prototypes from different vendors were tested. Experiments were performed to evaluate the RF windows by the vendors to select a window for the LEDA project. The Communications and Power, Inc. (CPI) windows were conditioned to 445 kW in roughly 15 hours. At 445 kW a window failed, and the cause of the failure will be presented. The English Electronic Valve, Inc. (EEV) windows were conditioned to 944 kW in 26 hours and then tested at 944 kW for 4 hours with no indication of problems.

  9. Design of an energy efficient and economical actuator for automobile windows

    E-Print Network [OSTI]

    Durand, Keith (Keith V.)

    2007-01-01T23:59:59.000Z

    This thesis describes the design and analysis of an efficient, yet low cost, drum driven window actuation system for an automotive power window. The design uses a novel approach that involves using cables to both actuate ...

  10. Key Elements of and Materials Performance Targets for Highly Insulating Window Frames

    E-Print Network [OSTI]

    Gustavsen, Arild

    2012-01-01T23:59:59.000Z

    in light green. 2.5 Window Frame E (PVC) Window frame Eis polyvinyl chloride (PVC). We performed calculations forspacer = 0.25?0.1 W/(mK) ? pvc = 0.9 W/(mK), ? eff. ,spacer

  11. How Do You Use Daylighting While Reducing Excess Heat from Windows...

    Broader source: Energy.gov (indexed) [DOE]

    through these windows in the summer. How do you use daylighting while reducing excess heat from windows? Each Thursday, you have the chance to share your thoughts on a question...

  12. Window-Related Energy Consumption in the US Residential and Commercial Building Stock

    E-Print Network [OSTI]

    Apte, Joshua; Arasteh, Dariush

    2008-01-01T23:59:59.000Z

    Building Heating Loads (Trillion BTU/yr) Total BuildingCooling Loads (Trillion BTU/yr) Non. Wind Infilt SHGC Wind.Energy Consumption (Trillion BTU/yr) Area, Window Window

  13. A density-temperature description of the outer electron radiation belt during geomagnetic storms

    SciTech Connect (OSTI)

    Borovsky, Joseph E [Los Alamos National Laboratory; Cayton, Thomas E [Los Alamos National Laboratory; Denton, Michael H [LANCASTER UNIV

    2009-01-01T23:59:59.000Z

    Electron flux measurements from 7 satellites in geosynchronous orbit from 1990-2007 are fit with relativistic bi-Maxwellians, yielding a number density n and temperature T description of the outer electron radiation belt. For 54.5 spacecraft years of measurements the median value ofn is 3.7x10-4 cm-3 and the median value ofT is 142 keY. General statistical properties of n, T, and the 1.1-1.5 MeV flux J are investigated, including local-time and solar-cycle dependencies. Using superposed-epoch analysis triggered on storm onset, the evolution of the outer electron radiation belt through high-speed-steam-driven storms is investigated. The number density decay during the calm before the storm is seen, relativistic-electron dropouts and recoveries from dropout are investigated, and the heating of the outer electron radiation belt during storms is examined. Using four different triggers (SSCs, southward-IMF CME sheaths, southward-IMF magnetic clouds, and minimum Dst), CME-driven storms are analyzed with superposed-epoch techniques. For CME-driven storms an absence of a density decay prior to storm onset is found, the compression of the outer electron radiation belt at time of SSC is analyzed, the number-density increase and temperature decrease during storm main phase is seen, and the increase in density and temperature during storm recovery phase is observed. Differences are found between the density-temperature and the flux descriptions, with more information for analysis being available in the density-temperature description.

  14. Storm-water management for construction activities. Developing pollution prevention plans and best management practices

    SciTech Connect (OSTI)

    Not Available

    1992-09-01T23:59:59.000Z

    The manual provides industrial facilities with comprehensive guidance on the development of storm water pollution prevention plans and identification of appropriate Best Management Practices (BMPs). It provides technical assistance and support to all facilities subject to pollution prevention requirements established under National Pollutant Discharge Elimination System (NPDES) permits for storm water point source discharges. EPA's storm water program significantly expands the scope and application of the existing NPDES permit system for municipal and industrial process wastewater discharges. It emphasizes pollution prevention and reflects a heavy reliance on BMPs to reduce pollutant loadings and improve water quality. The manual provides essential guidance in both of these areas.

  15. Storm-water management for industrial activities. Developing pollution prevention plans and best management practices

    SciTech Connect (OSTI)

    Not Available

    1992-09-01T23:59:59.000Z

    The manual provides industrial facilities with comprehensive guidance on the development of storm water pollution prevention plans and identification of appropriate Best Management Practices (BMPs). It provides technical assistance and support to all facilities subject to pollution prevention requirements established under National Pollutant Discharge Elimination System (NPDES) permits for storm water point source discharges. EPA's storm water program significantly expands the scope and application of the existing NPDES permit system for municipal and industrial process wastewater discharges. It emphasizes pollution prevention and reflects a heavy reliance on BMPs to reduce pollutant loadings and improve water quality. The manual provides essential guidance in both of these areas.

  16. Measure Guideline: Summary of Interior Ducts in New Construction, Including an Efficient, Affordable Method to Install Fur-Down Interior Ducts

    SciTech Connect (OSTI)

    Beal, D.; McIlvaine , J.; Fonorow, K.; Martin, E.

    2011-11-01T23:59:59.000Z

    This document illustrates guidelines for the efficient installation of interior duct systems in new housing, including the fur-up chase method, the fur-down chase method, and interior ducts positioned in sealed attics or sealed crawl spaces. This document illustrates guidelines for the efficient installation of interior duct systems in new housing. Interior ducts result from bringing the duct work inside a home's thermal and air barrier. Architects, designers, builders, and new home buyers should thoroughly investigate any opportunity for energy savings that is as easy to implement during construction, such as the opportunity to construct interior duct work. In addition to enhanced energy efficiency, interior ductwork results in other important advantages, such as improved indoor air quality, increased system durability and increased homeowner comfort. While the advantages of well-designed and constructed interior duct systems are recognized, the implementation of this approach has not gained a significant market acceptance. This guideline describes a variety of methods to create interior ducts including the fur-up chase method, the fur-down chase method, and interior ducts positioned in sealed attics or sealed crawl spaces. As communication of the intent of an interior duct system, and collaboration on its construction are paramount to success, this guideline details the critical design, planning, construction, inspection, and verification steps that must be taken. Involved in this process are individuals from the design team; sales/marketing team; and mechanical, insulation, plumbing, electrical, framing, drywall and solar contractors.

  17. Installation of Window Air Conditioners Page 1 of 2 Virginia Polytechnic Institute and State University No. 5705 Rev.: 3

    E-Print Network [OSTI]

    Buehrer, R. Michael

    Installation of Window Air Conditioners Page 1 of 2 Virginia Polytechnic Institute and State __________________________________________________________________________________ Subject: Installation of Window Air Conditioners........................................................................................................................................1 1. Purpose To define a policy for installation of window air conditioners that avoids exterior

  18. Integrated self-cleaning window assembly for optical transmission in combustion environments

    DOE Patents [OSTI]

    Kass, Michael D [Oak Ridge, TN

    2007-07-24T23:59:59.000Z

    An integrated window design for optical transmission in combustion environments is described. The invention consists of an integrated optical window design that prevents and removes the accumulation of carbon-based particulate matter and gaseous hydrocarbons through a combination of heat and catalysis. These windows will enable established optical technologies to be applied to combustion environments and their exhaust systems.

  19. Completed April 30, 2004. LBNL-54966. The Energy-Savings Potential of Electrochromic Windows

    E-Print Network [OSTI]

    % market penetration level in that year. Keywords: Building energy-efficiency, electrochromic windows1 Completed April 30, 2004. LBNL-54966. The Energy-Savings Potential of Electrochromic Windows Road, Berkeley, CA 94720, USA Abstract Switchable electrochromic (EC) windows have been projected

  20. Lighting energy savings potential of split-pane electrochromic windows controlled for

    E-Print Network [OSTI]

    LBNL-6152E Lighting energy savings potential of split- pane electrochromic windows controlled potential of split-pane electrochromic windows controlled for daylighting with visual comfort L was conducted to evaluate lighting energy savings of split-pane electrochromic (EC) windows controlled

  1. Industrial Risks and Land use Planning Study of blast window resistance

    E-Print Network [OSTI]

    Boyer, Edmond

    glasses with or without anti-explosion film, laminated glasses...), mobile frames or window locking a short time (inferior to 10 ms). Coevert and al. [5] also studied security window film and insulating/16/4 with Insulating glass fabricated with laminated glass (a) Figure 4: (a) security window film, (c) · The behaviour

  2. The ultra-thin solar cells that could generate power through windows

    E-Print Network [OSTI]

    Rogers, John A.

    The ultra-thin solar cells that could generate power through windows By Claire Bates Last updated, generating enough electricity to power the GPS or air conditioning. Solar cells, which convert solar energy into tinted windows Page 1 of 3The ultra-thin solar cells that could generate power through windows | Mail

  3. A First-Generation Prototype Dynamic Residential Window Christian Kohler, Howdy Goudey, and Dariush Arasteh

    E-Print Network [OSTI]

    October 26, 2004 Abstract We present the concept for a "smart" highly efficient dynamic window in residential buildings. We describe a prototype dynamic window that relies on an internal shade, which deploys technology have significantly reduced window-related energy use and peak demand in residential buildings

  4. U.S. Departments of Energy and Interior Announce Site for Solar...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    U.S. Departments of Energy and Interior Announce Site for Solar Energy Demonstration Projects in the Nevada Desert U.S. Departments of Energy and Interior Announce Site for Solar...

  5. Demand response-enabled autonomous control for interior space conditioning in residential buildings.

    E-Print Network [OSTI]

    Chen, Xue

    2008-01-01T23:59:59.000Z

    of demand response for residential buildings. ProfessorDemand Response-enabled Autonomous Control for Interior Space Conditioning in Residential BuildingsDemand Response-enabled Autonomous Control for Interior Space Conditioning in Residential Buildings

  6. Analysis of a Fabric/Desiccant Window Cavity Dehumidifier

    E-Print Network [OSTI]

    Hunn, B. D.; Grasso, M. M.; Vadlamani, V.

    1994-01-01T23:59:59.000Z

    design of such a system was developed and modeled to determine its performance under typical load and weather conditions. The design includes a moving fabric/desiccant belt installed in a window cavity, cwpled with a regenerative heat exchanger, which... energy, but could be supplied by an auxiliary source. A regenerative heat exchanger exmts heat from the hot exhaust of the dehumidification channel and preheats the incoming regeneration air slream. This system can be conf~gured to process two...

  7. High Reliability R-10 Windows Using Vacuum Insulating Glass Units

    SciTech Connect (OSTI)

    Stark, David

    2012-08-16T23:59:59.000Z

    The objective of this effort was for EverSealed Windows (“EverSealed” or “ESW”) to design, assemble, thermally and environmentally test and demonstrate a Vacuum Insulating Glass Unit (“VIGU” or “VIG”) that would enable a whole window to meet or exceed the an R-10 insulating value (U-factor ? 0.1). To produce a VIGU that could withstand any North American environment, ESW believed it needed to design, produce and use a flexible edge seal system. This is because a rigid edge seal, used by all other know VIG producers and developers, limits the size and/or thermal environment of the VIG to where the unit is not practical for typical IG sizes and cannot withstand severe outdoor environments. The rigid-sealed VIG’s use would be limited to mild climates where it would not have a reasonable economic payback when compared to traditional double-pane or triple-pane IGs. ESW’s goals, in addition to achieving a sufficiently high R-value to enable a whole window to achieve R-10, included creating a VIG design that could be produced for a cost equal to or lower than a traditional triple-pane IG (low-e, argon filled). ESW achieved these goals. EverSealed produced, tested and demonstrated a flexible edge-seal VIG that had an R-13 insulating value and the edge-seal system durability to operate reliably for at least 40 years in the harshest climates of North America.

  8. Development of a cooled microwave window. CRADA final report for CRADA Number Y-1293-0200

    SciTech Connect (OSTI)

    Bell, G.L.; Bigelow, T.S.; Leitch, R.M.; Berry, L.A. [Lockheed Martin Energy Systems, Inc., Oak Ridge, TN (United States); Holber, W.M. [Applied Science and Technology, Inc., Woburn, MA (United States)

    1995-04-06T23:59:59.000Z

    The objective of this Cooperative Research and Development project (CRADA) was to generate a new design for a microwave vacuum window to be used with ASTeX Corporation plasma processing equipment. This vacuum window allows transmission of microwave power from an input waveguide into a vacuum chamber for creation of plasma using the electron cyclotron resonance process. Requirements for the window design are: higher power capability, improved resistance to chemical attack, and physical compatibility with previous window models. In these applications, a significant portion of the input power is deposited in the window by plasma bombardment so the window must remove a great deal of heat to remain at a reliable operating temperature. A power level increase from 1.5 kW to 5 kW is desired by ASTeX for the new window which must have {approximately} 120 mm diameter and be compatible with existing hardware. New applications for these processing systems are being developed by ASTeX; these require the use of highly reactive fluorine plasmas which can rapidly etch some window materials. Therefore, the use of a fluorine compatible window ceramic is required. Two new window designs were investigated using advanced window-modeling techniques and low-power laboratory testing. It was determined that both concepts were capable of operating at significantly higher power levels than present commercial windows and would meet the CRADA design objectives. The compatibility of the window materials considered with fluorine plasmas are believed to be acceptable. ASTeX has a continuing interest in pursuing these window designs and will likely begin manufacturing design work of the improved design in the near future. There will also be a continuing effort to keep AlN ceramic manufacturers interested in improving the quality of large AlN disks. Additional window tests and development work could be performed by ORNL/MMES if a suitable funding source is available.

  9. Method and system for treating an interior surface of a workpiece using a charged particle beam

    DOE Patents [OSTI]

    Swenson, David Richard (Georgetown, MA)

    2007-05-23T23:59:59.000Z

    A method and system of treating an interior surface on an internal cavity of a workpiece using a charged particle beam. A beam deflector surface of a beam deflector is placed within the internal cavity of the workpiece and is used to redirect the charged particle beam toward the interior surface to treat the interior surface.

  10. Machine Learning Enhancement of Storm-Scale Ensemble Probabilistic Quantitative Precipitation Forecasts

    E-Print Network [OSTI]

    Xue, Ming

    Machine Learning Enhancement of Storm-Scale Ensemble Probabilistic Quantitative Precipitation uncertainty. Machine learning methods can produce calibrated probabilistic forecasts from the raw ensemble and machine learning are working to address these challenges. Numerical weather prediction (NWP) models

  11. Annual Storm Water Report for the Y-12 National Security Complex, Oak Ridge, Tennessee

    SciTech Connect (OSTI)

    Clean Water Compliance Section of the Environment Compliance Department

    2012-01-01T23:59:59.000Z

    The storm water pollution prevention program at the Y-12 National Security Complex (Y-12 Complex) intends to protect the quality of storm water runoff through: (1) reducing the exposure of metal accumulation areas to precipitation, (2) implementation of Best Management Practices, (3) sampling during rain events and subsequent analysis, and (4) routine surveillances. When prescribed, the analytical data is compared to a set of cut-off concentration values to determine how the Y-12 Complex relates to other metal fabrication industries in the state of Tennessee. The quality of the storm water exiting the Y-12 Complex via East Fork Poplar Creek indicated some improvement in 2011. This improvement is attributable to the completion of several construction, demolition and remediation projects which occurred in 2010 and 2011. Emphasis will continue to be placed on site inspections and the timely implementation of improved storm water control measures as deemed necessary.

  12. EPA STORM WATER MANAGEMENT MODEL (SWMM), VERSIONS 4.31 & 4.4

    E-Print Network [OSTI]

    Haller, Merrick

    EPA STORM WATER MANAGEMENT MODEL (SWMM), VERSIONS 4.31 & 4.4 Availability | Version 4.4h | SWMM5 and other best management practices (BMPs). Version 4.3 (May 1994) contains corrections and enhancements

  13. Annual Storm Water Report for the Y-12 National Security Complex Oak Ridge, Tennessee

    SciTech Connect (OSTI)

    Environment Compliance Department

    2012-01-01T23:59:59.000Z

    The storm water pollution prevention program at the Y-12 National Security Complex (Y-12 Complex) intends to protect the quality of storm water runoff through: (1) reducing the exposure of metal accumulation areas to precipitation, (2) implementation of Best Management Practices, (3) sampling during rain events and subsequent analysis, and (4) routine surveillances. When prescribed, the analytical data is compared to a set of cut-off concentration values to determine how the Y-12 Complex relates to other metal fabrication industries in the state of Tennessee. The quality of the storm water exiting the Y-12 Complex via East Fork Poplar Creek indicated some improvement in 2011. This improvement is attributable to the completion of several construction, demolition and remediation projects which occurred in 2010 and 2011. Emphasis will continue to be placed on site inspections and the timely implementation of improved storm water control measures as deemed necessary.

  14. Correlative comparison of geomagnetic storms and auroral substorms using geomagnetic indeces. Master's thesis

    SciTech Connect (OSTI)

    Cade, W.B.

    1993-06-01T23:59:59.000Z

    Partial contents include the following: (1) Geomagnetic storm and substorm processes; (2) Magnetospheric structure; (3) Substorm processes; (4) Data description; (5) Geomagnetic indices; and (6) Data period and data sets.

  15. Real-time storm surge prediction for bays on the Texas Gulf coast

    E-Print Network [OSTI]

    Kelley, Sean William

    1999-01-01T23:59:59.000Z

    ocean basins, over long periods of simulated time. The United Planetary Boundary Layer (PBL) model of Cardone et at. (1992) is used to generate hurricane wind and pressure fields from the elementary characteristics of a storm for input into ADCIRC...

  16. The Electric Field and Waves Instruments on the Radiation Belt Storm Probes Mission

    E-Print Network [OSTI]

    Wygant, J. R.

    The Electric Fields and Waves (EFW) Instruments on the two Radiation Belt Storm Probe (RBSP) spacecraft (recently renamed the Van Allen Probes) are designed to measure three dimensional quasi-static and low frequency ...

  17. Trajectory Analysis of Saudi Arabian Dust Storms 1 Michael Notaro 3

    E-Print Network [OSTI]

    Wisconsin at Madison, University of

    1 Trajectory Analysis of Saudi Arabian Dust Storms 1 2 Michael-Atmospheres 11 12 Abstract 13 14 Temporal and spatial characteristics of Saudi, are investigated using station and gridded weather 16 observations and remotely

  18. Characteristics of warm season precipitating storms in the Arkansas–Red River basin

    E-Print Network [OSTI]

    Tucker, Donna F.; Li, Xingong

    2009-07-16T23:59:59.000Z

    [1] Analysis of a multisensor precipitation product enables us to extract the precipitation from individual storms in the Arkansas–Red River drainage basin over a period of 11 years. We examine the year-to-year and ...

  19. Modeling Urban Storm-Water Quality Treatment: Model Development and Application to a Surface Sand Filter

    E-Print Network [OSTI]

    water impacts has led us to the develop- ment of different storm-water treatment strategies. Previous knowledge regarding traditional water treatment systems drink- ing and wastewater and the evaluation

  20. Coastal communities and climate change : a dynamic model of risk perception, storms, and adaptation

    E-Print Network [OSTI]

    Franck, Travis Read

    2009-01-01T23:59:59.000Z

    Climate change impacts, including sea-level rise and changes in tropical storm frequency and intensity, will pose signicant challenges to city planners and coastal zone managers trying to make wise investment and protection ...

  1. Urban Aerosol Impacts on Downwind Convective Storms SUSAN C. VAN DEN HEEVER AND WILLIAM R. COTTON

    E-Print Network [OSTI]

    Collett Jr., Jeffrey L.

    Urban Aerosol Impacts on Downwind Convective Storms SUSAN C. VAN DEN HEEVER AND WILLIAM R. COTTON. 2004; Givati and Rosenfeld 2004; Molders and Olson 2004; Jirak and Cotton 2006); 2) increased surface

  2. Storm surge analysis using numerical and statistical techniques and comparison with NWS model SLOSH

    E-Print Network [OSTI]

    Aggarwal, Manish

    2005-11-01T23:59:59.000Z

    of development. These parameters include latitude and longitude of the eye of the storm, track direction and forward speed measured at the eye, radius to maximum wind, central and peripheral atmospheric pressures, and an estimate of the geostrophic wind speed...

  3. C h a p t e r 1 0 Island in the Storm: Disturbance Ecology

    E-Print Network [OSTI]

    Willig, Michael

    depression forms from increasing low pressure that absorbs air and thermal energy from the ocean. The air Ocean. The same kind of storm in #12;282 M. R. Gannon and M. R. Willig the Pacific Ocean is a typhoon

  4. Environmental Health and Safety Laboratory Preparation for Tropical Storms or Hurricanes

    E-Print Network [OSTI]

    Natelson, Douglas

    Environmental Health and Safety Laboratory Preparation for Tropical Storms or Hurricanes damage, significant rainfall and possible campus flooding. Below are some guidelines that should exits and corridors are clear. Someone from the Environmental Health and Safety Department

  5. Variational optimization analysis of the 8 June 1974 severe storms in Oklahoma

    E-Print Network [OSTI]

    Liles, Charlie A

    2012-06-07T23:59:59.000Z

    VARIATIONAL OPTIMIZATION ANALYSIS OF THE 8 Ji3NE 1974 SEVERE STORMS IN OKLAHOMA A THESIS hy CHARLIE A. LILES Suhmitted to the Graduate College of Texas ASM Hniversity pa -tie' fulfillment of the requiremert for the degree of MASTER... OF SCIENCE August 1976 Major Subjeot; Meteorology VARIATIONAL OPTIMIZATION ANALYSIS OF THE 8 JUNE 1974 SEVERE STORMS IN OKLAHOMA A THESIS by CHARLIE A. LILES Approved as to style and content by: (Chairman of Committee) L (Head of Depar ent...

  6. A study of the relationship between certain moisture parameters and severe convective storms in central Oklahoma

    E-Print Network [OSTI]

    Scott, Carven Allen

    2012-06-07T23:59:59.000Z

    A STUDY OF THE RELATIONSHIP BETWEEN CERTAIN MOISTURE PARAMETERS AND SEVERE CONVECTIVE STORMS IN CENTRAL OKLAHOMA A Thesis by CARVEN ALLEN SCOTT Submitted to the Graduate College of Texas ASM University in partial fulfillment... of the requirement for the degree of MASTER OF SCIENCE May 1977 Major Subject: Meteorology A STUDY OF THE RELATIONSHIP BETWEEN CERTAIN MOISTURE PARAMETERS AND SEVERE CONVECTIVE STORMS IN CENTRAL OKLAHOMA A Thesis by CARVEN ALLEN SCOTT Approved as to style...

  7. The rainfall patterns associated with tropical storm Felice of September 1970

    E-Print Network [OSTI]

    Norton, Lewis Calvin

    1976-01-01T23:59:59.000Z

    THE RAINFALL PATTERNS ASSOCIATED WITH TROPICAL STORM FELICE OF SEPTEMBER 1970 A Thesis by LEWIS CALVIN NORTON Submitted to the Graduate College of Tc. . as ARM Univers ty in partial fulfillment of the requirement for the degree of MASTER... OF SCIENCE May 1976 Major Subject: Meteorology THE RAINFALL PATTERNS ASSOCIATED WITH TROPICAL STORM FELICE OF SEPTEMBER 1970 A Thesis by LEWIS CALVIN NORTON Approved as to style and content by: (Chairman of Committee) (Head of Department) (Member...

  8. The Solar Heavy Element Abundances: I. Constraints from Stellar Interiors

    E-Print Network [OSTI]

    Delahaye, F; Delahaye, Franck; Pinsonneault, Marc

    2005-01-01T23:59:59.000Z

    The latest solar atmosphere models include non-LTE corrections and 3D hydrodynamic convection simulations. These models predict a significant reduction in the solar metal abundance, which leads to a serious conflict between helioseismic data and the predictions of solar interiors models. We demonstrate that the helioseismic constraints on the surface convection zone depth and helium abundance combined with stellar interiors models can be used to define the goodness of fit for a given chemical composition. After a detailed examination of the errors in the theoretical models we conclude that models constructed with the older solar abundances are consistent (seismic data. Models constructed with the proposed new low abundance scale are strongly disfavored, disagreeing at the 15 \\sigma level. We then use the sensitivity of the seismic properties to abundance changes to invert the problem and infer a seismic solar heavy element abundance mix with two components: meteoritic abundances, and th...

  9. 2008 Minerals Yearbook U.S. Department of the Interior

    E-Print Network [OSTI]

    million (ppm), to thulium and lutetium, the least abundant rare-earth elements (Ree) at about 0.5 ppm2008 Minerals Yearbook U.S. Department of the Interior U.S. Geological Survey RARE EARTHS October 2010 #12;RaRe eaRths--2008 60.1 RaRe eaRths By Daniel J. Cordier and James B. hedrick Domestic survey

  10. Building America Webinar: Low-E Storms: The Next Big Thing in...

    Broader source: Energy.gov (indexed) [DOE]

    include: * Thomas Culp is the owner of Birch Point Consulting, LLC, which provides engineering and strategic consulting services in the areas of energy efficient window...

  11. OHMIC DISSIPATION IN THE INTERIORS OF HOT JUPITERS

    SciTech Connect (OSTI)

    Huang Xu [Department of Astrophysical Sciences, 4 Ivy Lane, Peyton Hall, Princeton University, Princeton, NJ 08544 (United States); Cumming, Andrew, E-mail: xuhuang@princeton.edu, E-mail: cumming@physics.mcgill.ca [Department of Physics, McGill University, 3600 Rue University, Montreal, QC H3A 2T8 (Canada)

    2012-09-20T23:59:59.000Z

    We present models of ohmic heating in the interiors of hot Jupiters in which we decouple the interior and the wind zone by replacing the wind zone with a boundary temperature T{sub iso} and magnetic field B{sub {phi}0}. Ohmic heating influences the contraction of gas giants in two ways: by direct heating within the convection zone and by heating outside the convection zone, which increases the effective insulation of the interior. We calculate these effects and show that internal ohmic heating is only able to slow the contraction rate of a cooling gas giant once the planet reaches a critical value of internal entropy. We determine the age of the gas giant when ohmic heating becomes important as a function of mass, T{sub iso}, and induced B{sub {phi}0}. With this survey of parameter space complete, we then adopt the wind zone scalings of Menou and calculate the expected evolution of gas giants with different levels of irradiation. We find that, with this prescription of magnetic drag, it is difficult to inflate massive planets or those with strong irradiation using ohmic heating, meaning that we are unable to account for many of the observed hot Jupiter radii. This is in contrast to previous evolutionary models that assumed that a constant fraction of the irradiation is transformed into ohmic power.

  12. Theoretical Predictions and Experimental Assessments of the Performance of Alumina RF Windows

    SciTech Connect (OSTI)

    Karen Ann Cummings

    1998-07-01T23:59:59.000Z

    Radio frequency (RF) windows are the most likely place for catastrophic failure to occur in input power couplers for particle accelerators. Reliable RF windows are essential for the success of the Accelerator Production of Tritium (APT) program because there are over 1000 windows on the accelerator, and it takes more than one day to recover from a window failure. The goals of this research are to analytically predict the lifetime of the windows, to develop a conditioning procedure, and to evaluate the performance of the RF windows. The analytical goal is to predict the lifetime of the windows. The probability of failure is predicted by the combination of a finite element model of the window, Weibull probabilistic analysis, and fracture mechanics. The window assembly is modeled in a finite element electromagnetic code in order to calculate the electric fields in the window. The geometry (i.e. mesh) and electric fields are input into a translator program to generate the mesh and boundary conditions for a finite element thermal structural code. The temperatures and stresses are determined in the thermal/structural code. The geometry and thermal structural results are input into another translator program to generate an input file for the reliability code. Material, geometry and service data are also input into the reliability code. To obtain accurate Weibull and fatigue data for the analytical model, four point bend tests were done. The analytical model is validated by comparing the measurements to the calculations. The lifetime of the windows is then determined using the reliability code. The analytical model shows the window has a good thermal mechanical design and that fast fracture is unlikely to occur below a power level of 9 Mw. The experimental goal is to develop a conditioning procedure and evaluate the performance of RF windows. During the experimental evaluation, much was learned about processing of the windows to improve the RF performance. Methods of processing included grit blasting and using various coatings.

  13. Feasibility study of broadband efficient ''water window'' source

    SciTech Connect (OSTI)

    Higashiguchi, Takeshi; Yugami, Noboru [Department of Advanced Interdisciplinary Sciences, Center for Optical Research and Education (CORE), and Optical Technology Innovation Center (OpTIC), Utsunomiya University, Yoto 7-1-2, Utsunomiya, Tochigi 321-8585 (Japan); Japan Science and Technology Agency, CREST, 4-1-8 Honcho, Kanagawa, Saitama 332-0012 (Japan); Otsuka, Takamitsu [Department of Advanced Interdisciplinary Sciences, Center for Optical Research and Education (CORE), and Optical Technology Innovation Center (OpTIC), Utsunomiya University, Yoto 7-1-2, Utsunomiya, Tochigi 321-8585 (Japan); Jiang Weihua [Department of Electrical Engineering, Nagaoka University of Technology, Kami-tomiokamachi 1603-1, Nagaoka, Niigata 940-2188 (Japan); Endo, Akira [Research Institute for Science and Engineering, Waseda University, Okubo 3-4-1, Shinjuku, Tokyo 169-8555 (Japan); Li Bowen; Dunne, Padraig; O'Sullivan, Gerry [School of Physics, University College Dublin, Belfield, Dublin 4 (Ireland)

    2012-01-02T23:59:59.000Z

    We demonstrate a table-top broadband emission water window source based on laser-produced high-Z plasmas. Resonance emission from multiply charged ions merges to produce intense unresolved transition arrays (UTAs) in the 2-4 nm region, extending below the carbon K edge (4.37 nm). Arrays resulting from n=4-n=4 transitions are overlaid with n=4-n=5 emission and shift to shorter wavelength with increasing atomic number. An outline of a microscope design for single-shot live cell imaging is proposed based on a bismuth plasma UTA source, coupled to multilayer mirror optics.

  14. Expert Meeting Report: Windows Options for New and Existing Homes

    SciTech Connect (OSTI)

    Ojczyk, C.; Carmody, J.; Haglund, K.

    2013-05-01T23:59:59.000Z

    The NorthernSTAR Building America Partnership held an Expert Meeting on Windows Options for New and Existing Homes on November 14, 2011 at the Nolte Building on the campus of the University of Minnesota in Minneapolis, MN. Featured speakers included John Carmody and Pat Huelman of the University of Minnesota, Charlie Curcija of Lawrence Berkeley National Laboratory, Jim Larson of Cardinal Glass Industries, Peter Yost of Building Green, Peter Baker of Building Science Corporation, and Theresa Weston of Du Pont Innovations. Audience participation was actively encouraged during each presentation to uncover need and promote dialog among researchers and industry professionals.

  15. Mickey Leland Energy Fellowship Report: Development of Advanced Window Coatings

    SciTech Connect (OSTI)

    Bolton, Ladena A.; Alvine, Kyle J.; Schemer-Kohrn, Alan L.

    2014-08-05T23:59:59.000Z

    Advanced fenestration technologies for light and thermal management in building applications are of great recent research interest for improvements in energy efficiency. Of these technologies, there is specific interest in advanced window coating technologies that have tailored control over the visible and infrared (IR) scattering into a room for both static and dynamic applications. Recently, PNNL has investigated novel subwavelength nanostructured coatings for both daylighting, and IR thermal management applications. Such coatings rese still in the early stages and additional research is needed in terms of scalable manufacturing. This project investigates aspects of a potential new methodology for low-cost scalable manufacture of said subwavelength coatings.

  16. Atmospheric Condensation Potential of Windows in Hot, Humid Climates

    E-Print Network [OSTI]

    El Diasty, R.; Budaiwi, I.

    . REFERENCES I. Wilson, A.G., 1973, " Condensation on Inside Window Surfaces," Canadian Building Di~esl, vol. 137, no. 2, pp 4.1-4.4. 2. DUll, G.S., 1979, " Condensation in Allics: Are Vapour Ilarriers Really the_answer? ,", Energy and Iluildings, vol. I... and Buildinl; Materials. vol. 3, no. 3, pp 135 -139 . 9. EI Diasty, R., Budaiwi, I., 1989, " Prediction of Mass Condensation Rate for Gas-Vapour Mixture Dominated by a Non-Condensable Gas," 12th Canadian Congress of ADDlied Mechanics, vol.2, pp 734 ?735...

  17. Energy-Efficient Window Treatments | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelinesProvedDecember 2005DepartmentDecember 2011District |Department ofEnergy andWindow

  18. Expert Meeting Report: Windows Options for New and Existing Homes

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector General Office of Audit|Department of Energy56Executive Summit onTransforming Existing Windows

  19. Affordable Window Insulation with R-10/inch Rating

    SciTech Connect (OSTI)

    Jenifer Marchesi Redouane Begag; Je Kyun Lee; Danny Ou; Jong Ho Sonn; George Gould; Wendell Rhine

    2004-10-15T23:59:59.000Z

    During the performance of contract DE-FC26-00-NT40998, entitled ''Affordable Window Insulation with R-10/inch Value'', research was conducted at Aspen Aerogels, Inc. to develop new transparent aerogel materials suitable for window insulation applications. The project requirements were to develop a formulation or multiple formulations that have high transparency (85-90%) in the visible region, are hydrophobic (will not opacify with exposure to water vapor or liquid), and have at least 2% resiliency (interpreted as recoverable 2% strain and better than 5% strain to failure in compression). Results from an unrelated project showed that silica aerogels covalently bonded to organic polymers exhibit excellent mechanical properties. At the outset of this project, we believed that such a route is the best to improve mechanical properties. We have applied Design of Experiment (DOE) techniques to optimize formulations including both silica aerogels and organically modified silica aerogels (''Ormosils''). We used these DOE results to optimize formulations around the local/global optimization points. This report documents that we succeeded in developing a number of formulations that meet all of the stated criteria. We successfully developed formulations utilizing a two-step approach where the first step involves acid catalyzed hydrolysis and the second step involves base catalyzed condensation to make the gels. The gels were dried using supercritical CO{sub 2} and we were able to make 1 foot x 1 foot x 0.5 inch panels that met the criteria established.

  20. Hello Everybody, and Welcome to BarnStorm: A Look into Theatrical Crisis Management and Problem Solving

    E-Print Network [OSTI]

    Putnick, Marissa

    2013-01-01T23:59:59.000Z

    iv Hello Everybody and Welcome toOF CALIFORNIA SANTA CRUZ HELLO EVERYBODY, AND WELCOME TOas BarnStorm’s new home iv   Hello Everybody, and Welcome to

  1. High Performance X-Ray Transmission Windows Based on Graphenic Carbon

    E-Print Network [OSTI]

    Huebner, Sebastian; Kapser, Stefan; Pahlke, Andreas; Kreupl, Franz

    2015-01-01T23:59:59.000Z

    A novel x-ray transmission window based on graphenic carbon has been developed with superior performance compared to beryllium transmission windows that are currently used in the field. Graphenic carbon in combination with an integrated silicon frame allows for a window design which does not use a mechanical support grid or additional light blocking layers. Compared to beryllium, the novel x-ray transmission window exhibits an improved transmission in the low energy region ($0.1 hbox{keV}-3 hbox{keV}$ ) while demonstrating excellent mechanical stability, as well as light and vacuum tightness. Therefore, the newly established graphenic carbon window, can replace beryllium in x-ray transmission windows with a nontoxic and abundant material. Index terms: Beryllium, Carbon, Graphene, Thin films, X-ray applications, X-ray detectors

  2. Window-Related Energy Consumption in the US Residential andCommercial Building Stock

    SciTech Connect (OSTI)

    Apte, Joshua; Arasteh, Dariush

    2006-06-16T23:59:59.000Z

    We present a simple spreadsheet-based tool for estimating window-related energy consumption in the United States. Using available data on the properties of the installed US window stock, we estimate that windows are responsible for 2.15 quadrillion Btu (Quads) of heating energy consumption and 1.48 Quads of cooling energy consumption annually. We develop estimates of average U-factor and SHGC for current window sales. We estimate that a complete replacement of the installed window stock with these products would result in energy savings of approximately 1.2 quads. We demonstrate that future window technologies offer energy savings potentials of up to 3.9 Quads.

  3. Temporal variations of the rotation rate in the solar interior

    E-Print Network [OSTI]

    H. M. Antia; Sarbani Basu

    2000-04-25T23:59:59.000Z

    The temporal variations of the rotation rate in the solar interior are studied using frequency splittings from Global Oscillations Network Group (GONG) data obtained during the period 1995-99. We find alternating latitudinal bands of faster and slower rotation which appear to move towards the equator with time - similar to the torsional oscillations seen at the solar surface. This flow pattern appears to persist to a depth of about 0.1R_sun and in this region its magnitude is well correlated with solar activity indices. We do not find any periodic or systematic changes in the rotation rate near the base of the convection zone.

  4. Phenomenological Description of the Interior of the Schwarzschild Black Hole

    E-Print Network [OSTI]

    Hikaru Kawai; Yuki Yokokura

    2014-09-19T23:59:59.000Z

    We discuss a sufficiently large 4-dimensional Schwarzschild black hole which is in equilibrium with a heat bath. In other words, we consider a black hole which has grown up from a small one in the heat bath adiabatically. We express the metric of the interior of the black hole in terms of two functions: One is the intensity of the Hawking radiation, and the other is the ratio between the radiation energy and the pressure in the radial direction. Especially in the case of conformal matters we check that it is a self-consistent solution of the semi-classical Einstein equation, $G_{\\mu\

  5. How to Extract Energy from Dirty Interior Air

    E-Print Network [OSTI]

    Cheney, W. A.

    1982-01-01T23:59:59.000Z

    HOW TO EXTRACT ENERGY FROM DIRTY INTERIOR AIR William A. Cheney United Air Specialists, Inc. Cincinnati, Ohio ABSTRACT Industry is often faced with the problem of reducing the level of contaminated air in its plants. The common method... in residential and HVAC applications. With modi ~icatio~s, it .is used to control a wide range of mdustrIal partIculate contaminants. A simple diagram may help clear up any confusion that exists between the basic design of the Cottrell single stage ESP used...

  6. Evaluations of fiber optic sensors for interior applications

    SciTech Connect (OSTI)

    Sandoval, M.W.; Malone, T.P.

    1996-02-01T23:59:59.000Z

    This report addresses the testing and evaluation of commercial fiber optic intrusion detection systems in interior applications. The applications include laying optical fiber cable above suspended ceilings to detect removal of ceiling tiles, embedding optical fibers inside a tamper or item monitoring blanket that could be placed over an asset, and installing optical fibers on a door to detect movement or penetration. Detection capability of the fiber optic sensors as well as nuisance and false alarm information were focused on during the evaluation. Fiber optic sensor processing, system components, and system setup are described.

  7. Property:Building/InteriorHeight | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscot County, Maine:Plug PowerAddress JumpFloorAreaTotal Jump to:InteriorHeight Jump

  8. 7X performance results - final report : ASCI Red vs Red Storm.

    SciTech Connect (OSTI)

    Dinge, Dennis C. (Cray Inc., Albuquerque, NM); Davis, Michael E. (Cray Inc., Albuquerque, NM); Haskell, Karen H.; Ballance, Robert A.; Gardiner, Thomas Anthony; Stevenson, Joel O.; Noe, John P.

    2011-04-01T23:59:59.000Z

    The goal of the 7X performance testing was to assure Sandia National Laboratories, Cray Inc., and the Department of Energy that Red Storm would achieve its performance requirements which were defined as a comparison between ASCI Red and Red Storm. Our approach was to identify one or more problems for each application in the 7X suite, run those problems at multiple processor sizes in the capability computing range, and compare the results between ASCI Red and Red Storm. The first part of this report describes the two computer systems, the applications in the 7X suite, the test problems, and the results of the performance tests on ASCI Red and Red Storm. During the course of the testing on Red Storm, we had the opportunity to run the test problems in both single-core mode and dual-core mode and the second part of this report describes those results. Finally, we reflect on lessons learned in undertaking a major head-to-head benchmark comparison.

  9. Hydrofluoric acid-resistant composite window and method for its fabrication

    DOE Patents [OSTI]

    Ostenak, C.A.; Mackay, H.A.

    1985-07-18T23:59:59.000Z

    A hydrofluoric acid-resistant composite window and method for its fabrication are disclosed. The composite window comprises a window having first and second sides. The first side is oriented towards an environment containing hydrofluoric acid. An adhesive is applied to the first side. A layer of transparent hydrofluoric acid-resistant material, such as Mylar, is applied to the adhesive and completely covers the first side. The adhesive is then cured.

  10. Purged window apparatus. [On-line spectroscopic analysis of gas flow systems

    DOE Patents [OSTI]

    Ballard, E.O.

    1982-04-05T23:59:59.000Z

    A purged window apparatus is described which utilizes tangentially injected heated purge gases in the vicinity of electromagnetic radiation transmitting windows and a tapered external mounting tube to accelerate these gases to provide a vortex flow on the window surface and a turbulent flow throughout the mounting tube thereby preventing backstreaming of flowing gases under investigation in a chamber to which a plurality of similar purged apparatus is attached with the consequent result that spectroscopic analyses can be undertaken for lengthy periods without the necessity of interrupting the flow for cleaning or replacing the windows due to contamination.

  11. Application issues for large-area electrochromic windows in commercial buildings

    E-Print Network [OSTI]

    Lee, Eleanor S.; DiBartolomeo, D.L.

    2000-01-01T23:59:59.000Z

    Handbook of inorganic electrochromic materials. 1995.R. Sullivan. A Review of Electrochromic Window Performancetime of large-scale electrochromic devices. In Large-Area

  12. T-573: Windows Remote Desktop Client DLL Loading Error Lets Remote Users Execute Arbitrary Code

    Broader source: Energy.gov [DOE]

    A vulnerability was reported in Windows Remote Desktop Client. A remote user can cause arbitrary code to be executed on the target user's system.

  13. Window-Related Energy Consumption in the US Residential and Commercial Building Stock

    E-Print Network [OSTI]

    Apte, Joshua; Arasteh, Dariush

    2008-01-01T23:59:59.000Z

    2001). "Residential Energy Consumption Survey." 2006, fromCommercial Building Energy Consumption Survey." from http://Scale window-related energy consumption to account for new

  14. Smarter Smart Windows | U.S. DOE Office of Science (SC)

    Office of Science (SC) Website

    Smarter Smart Windows Basic Energy Sciences (BES) BES Home About Research Facilities Science Highlights Benefits of BES Funding Opportunities Basic Energy Sciences Advisory...

  15. E-Print Network 3.0 - affordable window insulation Sample Search...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of the UK Forestry Commission Collection: Renewable Energy 5 Renovating Residential HVAC Systems HVAC Systems Summary: windows. Add ceilingwallfloor insulation. 2 Ducts moved...

  16. Key Elements of and Materials Performance Targets for Highly Insulating Window Frames

    SciTech Connect (OSTI)

    Gustavsen, Arild; Grynning, Steinar; Arasteh, Dariush; Jelle, Bjorn Petter; Goudey, Howdy

    2011-03-28T23:59:59.000Z

    The thermal performance of windows is important for energy efficient buildings. Windows typically account for about 30-50 percent of the transmission losses though the building envelope, even if their area fraction of the envelope is far less. The reason for this can be found by comparing the thermal transmittance (U-factor) of windows to the U-factor of their opaque counterparts (wall, roof and floor constructions). In well insulated buildings the U-factor of walls, roofs an floors can be between 0.1-0.2 W/(m2K). The best windows have U-values of about 0.7-1.0. It is therefore obvious that the U-factor of windows needs to be reduced, even though looking at the whole energy balance for windows (i.e. solar gains minus transmission losses) makes the picture more complex.In high performance windows the frame design and material use is of utmost importance, as the frame performance is usually the limiting factor for reducing the total window U-factor further. This paper describes simulation studies analyzing the effects on frame and edge-of-glass U-factors of different surface emissivities as well as frame material and spacer conductivities. The goal of this work is to define materials research targets for window frame components that will result in better frame thermal performance than is exhibited by the best products available on the market today.

  17. U-225: Citrix Access Gateway Plug-in for Windows nsepacom ActiveX...

    Broader source: Energy.gov (indexed) [DOE]

    in Citrix Access Gateway Plug-in for Windows can be exploited by malicious people to compromise a user's system. reference LINKS: Citrix Knowledge Center Secunia...

  18. Building Scientific Workflows for Earth System Modelling with Windows Workflow Foundation

    E-Print Network [OSTI]

    Building Scientific Workflows for Earth System Modelling with Windows Workflow Foundation Matthew J developed a framework for the composition, execution and management of integrated Earth system models

  19. Apparatus for preventing particle deposition from process streams on optical access windows

    DOE Patents [OSTI]

    Logan, Ronald G. (Fredericksburg, VA); Grimm, Ulrich (Morgantown, WV)

    1993-01-01T23:59:59.000Z

    An electrostatic precipitator is disposed inside and around the periphery of the window of a viewing port communicating with a housing through which a particle-laden gas stream is being passed. The precipitator includes a pair of electrodes around the periphery of the window, spaced apart and connected to a unidirectional voltage source. Application of high voltage from the source to the electrodes causes air molecules in the gas stream to become ionized, attaching to solid particles and causing them to be deposited on a collector electrode. This prevents the particles from being deposited on the window and keeps the window clean for viewing and making optical measurements.

  20. U< I 7 jjORNLCON-3S) EXPERIMENTAL ANALYSIS OF A WINDOW

    E-Print Network [OSTI]

    Oak Ridge National Laboratory

    UAIR CONDITIONER OAK RIDGE WITH NATIONAL R-22. #12;ORNUCON-389 EXPERIMENTAL ANALYSIS OF A WINDOW AIR CONDITIONER WITH R-22 AND ZEOTROPIC MIXTURE OF R

  1. Solar Energy Windows and Smart IR Switchable Building Technologies

    SciTech Connect (OSTI)

    McCarny, James; Kornish, Brian

    2011-09-30T23:59:59.000Z

    The three building envelope functions with the largest impact on the energy usage are illumination, energy flux and energy production. In general, these three functions are addressed separately in the building design. A step change toward a zero-energy building can be achieved with a glazing system that combines these three functions and their control into a single unit. In particular, significant value could be realized if illumination into the building is dynamically controlled such that it occurs during periods of low load on the grid (e.g., morning) to augment illumination supplied by interior lights and then to have that same light diverted to PV energy production and the thermal energy rejected during periods of high load on the grid. The objective of this project is to investigate the feasibility of a glazing unit design that integrates these three key functions (illumination and energy flux control, and power production) into a single module.

  2. Potential Release Site Sediment Concentrations Correlated to Storm Water Station Runoff through GIS Modeling

    SciTech Connect (OSTI)

    C.T. McLean

    2005-06-01T23:59:59.000Z

    This research examined the relationship between sediment sample data taken at Potential Release Sites (PRSs) and storm water samples taken at selected sites in and around Los Alamos National Laboratory (LANL). The PRSs had been evaluated for erosion potential and a matrix scoring system implemented. It was assumed that there would be a stronger relationship between the high erosion PRSs and the storm water samples. To establish the relationship, the research was broken into two areas. The first area was raster-based modeling, and the second area was data analysis utilizing the raster based modeling results and the sediment and storm water sample results. Two geodatabases were created utilizing raster modeling functions and the Arc Hydro program. The geodatabase created using only Arc Hydro functions contains very fine catchment drainage areas in association with the geometric network and can be used for future contaminant tracking. The second geodatabase contains sub-watersheds for all storm water stations used in the study along with a geometric network. The second area of the study focused on data analysis. The analytical sediment data table was joined to the PRSs spatial data in ArcMap. All PRSs and PRSs with high erosion potential were joined separately to create two datasets for each of 14 analytes. Only the PRSs above the background value were retained. The storm water station spatial data were joined to the table of analyte values that were either greater than the National Pollutant Discharge Elimination System (NPDES) Multi-Sector General Permit (MSGP) benchmark value, or the Department of Energy (DOE) Drinking Water Defined Contribution Guideline (DWDCG). Only the storm water stations were retained that had sample values greater than the NPDES MSGP benchmark value or the DOE DWDCG. Separate maps were created for each analyte showing the sub-watersheds, the PRSs over background, and the storm water stations greater than the NPDES MSGP benchmark value or the DOE DWDCG. Tables were then created for each analyte that listed the PRSs average value by storm water station allowing a tabular view of the mapped data. The final table that was created listed the number of high erosion PRSs and regular PRSs over background values that were contained in each watershed. An overall relationship between the high erosion PRSs or the regular PRSs and the storm water stations was not identified through the methods used in this research. However, the Arc Hydro data models created for this analysis were used to track possible sources of contamination found through sampling at the storm water gaging stations. This geometric network tracing was used to identify possible relationships between the storm water stations and the PRSs. The methods outlined for the geometric network tracing could be used to find other relationships between the sites. A cursory statistical analysis was performed which could be expanded and applied to the data sets generated during this research to establish a broader relationship between the PRSs and storm water stations.

  3. ENVIRONMENTAL ASSESSMENT FOR THE NPDES STORM WATER COMPLIANCE ALTERNATIVES AT THE SRS

    SciTech Connect (OSTI)

    Shedrow, C

    2006-11-01T23:59:59.000Z

    The U.S. Department of Energy (DOE) prepared this environmental assessment (EA) to evaluate the potential environmental impacts associated with proposed and alternative actions to achieve water quality permit compliance at 38 storm water outfalls located at the Savannah River Site (SRS) (Figure 1-1). Effluent monitoring data indicates that some of these outfalls may not presently comply with new National Pollutant Discharge Elimination System (NPDES) Storm Water General Permit effluent standards that became effective July 1, 2005 (SCR000000). The NPDES permit requires that best management practices (BMPs) be implemented and maintained, as necessary, to ensure that storm water discharges at SRS do not cause or contribute to the contravention of applicable state water quality standards (WQS).

  4. Thompson, R. L., B. T. Smith, A. R. Dean, and P. T. Marsh, 2014: Spatial distributions of tornadic near-storm environments by convective mode. Electronic J. Severe Storms Meteor., 8 (5), 122.

    E-Print Network [OSTI]

    . SMITH, AND ANDREW R. DEAN NOAA/NWS/NCEP Storm Prediction Center, Norman, Oklahoma PATRICK T. MARSH* University of Oklahoma, Norman, Oklahoma (Submitted 19 February 2013; in final form 08 September 2013: NOAA/NWS/NCEP Storm Prediction Center, Norman, Oklahoma. ____________________ Corresponding author

  5. Water Window Ptychographic Imaging with Characterized Coherent X-rays

    E-Print Network [OSTI]

    Rose, Max; Dzhigaev, Dmitry; Gorobtsov, Oleg; Senkbeil, Tobias; von Gundlach, Andreas; Gorniak, Thomas; Shabalin, Anatoly; Viefhaus, Jens; Rosenhahn, Axel; Vartanyants, Ivan

    2015-01-01T23:59:59.000Z

    We report on a ptychographical coherent diffractive imaging experiment in the water window with focused soft X-rays at $500~\\mathrm{eV}$. An X-ray beam with high degree of coherence was selected for ptychography at the P04 beamline of the PETRA III synchrotron radiation source. We measured the beam coherence with the newly developed non-redundant array method. A pinhole $2.6~\\mathrm{\\mu m}$ in size selected the coherent part of the beam and was used for ptychographic measurements of a lithographically manufactured test sample and fossil diatom. The achieved resolution was $53~\\mathrm{nm}$ for the test sample and only limited by the size of the detector. The diatom was imaged at a resolution better than $90~\\mathrm{nm}$.

  6. Vacuum chamber with a supersonic-flow aerodynamic window

    DOE Patents [OSTI]

    Hanson, C.L.

    1980-10-14T23:59:59.000Z

    A supersonic flow aerodynamic window is disclosed whereby a steam ejector situated in a primary chamber at vacuum exhausts superheated steam toward an orifice to a region of higher pressure, creating a barrier to the gas in the region of higher pressure which attempts to enter through the orifice. In a mixing chamber outside and in fluid communication with the primary chamber, superheated steam and gas are combined into a mixture which then enters the primary chamber through the orifice. At the point of impact of the ejector/superheated steam and the incoming gas/superheated steam mixture, a barrier is created to the gas attempting to enter the ejector chamber. This barrier, coupled with suitable vacuum pumping means and cooling means, serves to keep the steam ejector and primary chamber at a negative pressure, even though the primary chamber has an orifice to a region of higher pressure.

  7. Vacuum chamber with a supersonic flow aerodynamic window

    DOE Patents [OSTI]

    Hanson, Clark L. (Livermore, CA)

    1982-01-01T23:59:59.000Z

    A supersonic flow aerodynamic window, whereby a steam ejector situated in a primary chamber at vacuum exhausts superheated steam toward an orifice to a region of higher pressure, creating a barrier to the gas in the region of higher pressure which attempts to enter through the orifice. In a mixing chamber outside and in fluid communication with the primary chamber, superheated steam and gas are combined into a mixture which then enters the primary chamber through the orifice. At the point of impact of the ejector/superheated steam and the incoming gas/superheated steam mixture, a barrier is created to the gas attempting to enter the ejector chamber. This barrier, coupled with suitable vacuum pumping means and cooling means, serves to keep the steam ejector and primary chamber at a negative pressure, even though the primary chamber has an orifice to a region of higher pressure.

  8. Chromogenic switchable glazing: Towards the development of the smart window

    SciTech Connect (OSTI)

    Lampert, C.M.

    1995-06-01T23:59:59.000Z

    The science and technology of chromogenic materials for switchable glazings in building applications is discussed. These glazings can be used for dynamic control of solar and visible energy. Currently many researchers and engineers are involved with the development of products in this field. A summary of activities in Japan, Europe, Australia, USA and Canada is made. The activities of the International Energy Agency are included. Both non-electrically activated and electrically activated glazings are discussed. Technologies covered in the first category are photochromics, and thermochromics and thermotropics. A discussion of electrically activated chromogenic glazings includes dispersed liquid crystals, dispersed particles and electrochromics. A selection of device structures and performance characteristics are compared. A discussion of transparent conductors is presented. Technical issues concerning large-area development of smart windows are discussed.

  9. U.S. DEPARTMENT OF THE INTERIOR U.S. GEOLOGICAL SURVEY

    E-Print Network [OSTI]

    ............................................._ Table 2. OTEC study core station information (calcareous ooze).......................24 #12;Table 3. Representative engineering properties of sediment from cores from the OTEC study area for storms affecting the Hawaiian Islands.................30 Figure 4: Location map showing location of OTEC

  10. Applications of digital radar in the analysis of severe local storms

    E-Print Network [OSTI]

    Vogel, John Everett

    1973-01-01T23:59:59.000Z

    August 1973 Major Subject: Meteorology APPLICATIONS OF DIGITAL RADAR IN THE ANALYSIS OF SEVERE LOCAL STORMS A Thesis JOHN EVERETT VOGEL Approved as to style and content by: (Co-Chairman of Committee) / /. Lier &. i i . 3 I r1 ~ '-d (ri 'i ~ ~ i...(& V (Co-Chairman of Committee) k. )&7 I). *v 'e(C' & ~. (Head of Department) (Member) ( ember) August 1973 ABSTRACT Applications of Digital Radar in the Analysis of Severe Local Storms (August 1973) John E. Vogel, B. S. , Texas A&M University...

  11. Interior Offers First Right-of-Way for Renewable Energy Transmission...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Action Plan to create American jobs, develop clean energy sources and cut carbon pollution, Secretary of the Interior Sally Jewell and Bureau of Ocean Energy Management (BOEM)...

  12. A PROCEDURE FOR CALCULATING INTERIOR DAYLIGHT ILLUMINATION WITH A PROGRAMMABLE HAND CALCULATOR

    E-Print Network [OSTI]

    Bryan, H.J.

    2010-01-01T23:59:59.000Z

    FOR CALCULATING INTERIOR DAYLIGHT ILLUMINATION WITH ACommittee E-3.2, "Daylight: International RecommendationsCalcula- tion of Natural Daylight," CIE PUBLICATION No. 16,

  13. Field Evaluation of Highly Insulating Windows in the Lab Homes: Winter Experiment

    SciTech Connect (OSTI)

    Parker, Graham B.; Widder, Sarah H.; Bauman, Nathan N.

    2012-06-01T23:59:59.000Z

    This field evaluation of highly insulating windows was undertaken in a matched pair of 'Lab Homes' located on the Pacific Northwest National Laboratory (PNNL) campus during the 2012 winter heating season. Improving the insulation and solar heat gain characteristics of a home's windows has the potential to significantly improve the home's building envelope and overall thermal performance by reducing heat loss (in the winter), and cooling loss and solar heat gain (in the summer) through the windows. A high quality installation and/or window retrofit will also minimize or reduce air leakage through the window cavity and thus also contribute to reduced heat loss in the winter and cooling loss in the summer. These improvements all contribute to decreasing overall annual home energy use. Occupant comfort (non-quantifiable) can also be increased by minimizing or eliminating the cold 'draft' (temperature) many residents experience at or near window surfaces that are at a noticeably lower temperature than the room air temperature. Lastly, although not measured in this experiment, highly insulating windows (triple-pane in this experiment) also have the potential to significantly reduce the noise transmittance through windows compared to standard double-pane windows. The metered data taken in the Lab Homes and data analysis presented here represent 70 days of data taken during the 2012 heating season. As such, the savings from highly insulating windows in the experimental home (Lab Home B) compared to the standard double-pane clear glass windows in the baseline home (Lab Home A) are only a portion of the energy savings expected from a year-long experiment that would include a cooling season. The cooling season experiment will take place in the homes in the summer of 2012, and results of that experiment will be reported in a subsequent report available to all stakeholders.

  14. Storm water quantity control has long been a challenge for highway designers. Traditionally, centralized best management practice designs

    E-Print Network [OSTI]

    Fiedler, Fritz R.

    on centralized detention-based best man- agement practices (BMPs) that reduce the amount of storm water released and environmentally sound storm water management practice (1, 6). Numerous studies and other research efforts have, centralized best management practice designs are often cost prohibitive and inefficient in many rural highway

  15. Predictability of a Mediterranean Tropical-Like Storm Downstream of the Extratropical Transition of Hurricane Helene (2006)

    E-Print Network [OSTI]

    Chaboureau, Jean-Pierre

    2006-01-01T23:59:59.000Z

    Predictability of a Mediterranean Tropical-Like Storm Downstream of the Extratropical Transition downstream. The present study focuses on the predictability of a Mediterranean tropical-like storm (Medicane) on 26 September 2006 downstream of the ET of Hurricane Helene from 22 to 25 September. While

  16. AUGUST 1999 507C O R F I D I The Birth and Early Years of the Storm Prediction Center

    E-Print Network [OSTI]

    . CORFIDI NOAA/NWS/NCEP/Storm Prediction Center, Norman, Oklahoma (Manuscript received 12 August 1998 tornado to strike Tinker Air Force Base in one week on 25 March 1948. The success of this and later's Weather Radar Laboratory to form the National Severe Storms Laboratory (NSSL) in Norman, Oklahoma, in 1964

  17. A Snowstorm Puzzle: The Relationship Between Federal Declarations of Impact and Storm Tracks for Extreme Midwestern Blizzards

    E-Print Network [OSTI]

    Atkinson, Christopher John

    2009-11-18T23:59:59.000Z

    Storms NOAA, HPC, GISS, and Storm Data Monthly Frequency of Extreme Midwestern Blizzards 0 2 4 6 8 10 12 14 16 18 Jan uar y Feb rua ry Ma rch April May Sep tem ber Oc tob er No vem ber De cem ber 9/1/66-5/31/87 9/1/87-5/31/08 Frequency of Federal...

  18. SUN-TO-EARTH CHARACTERISTICS OF TWO CORONAL MASS EJECTIONS INTERACTING NEAR 1 AU: FORMATION OF A COMPLEX EJECTA AND GENERATION OF A TWO-STEP GEOMAGNETIC STORM

    E-Print Network [OSTI]

    Liu, Ying D.

    On 2012 September 30-October 1 the Earth underwent a two-step geomagnetic storm. We examine the Sun-to-Earth characteristics of the coronal mass ejections (CMEs) responsible for the geomagnetic storm with combined heliospheric ...

  19. Storm-induced changes of the topside ionosphere as deduced from incoherent-scatter radars. Master's thesis

    SciTech Connect (OSTI)

    Lunn, K.J.

    1990-01-01T23:59:59.000Z

    Incoherent scatter radar observations from Millstone Hill, Saint Santin, and Arecibo are used to illustrate changes of the topside ionosphere during a geomagnetic storm. These observations consist of electron density, electron and ion temperatures, and ion velocity components parallel and perpendicular to the magnetic field. These parameters can further describe changes in ion composition, electric fields, and neutral winds. Attention is given to a specific storm during the Equinox Transition Study (ETS) of September 1984. In order to isolate the storm effects in the topside ionosphere, a comparison will be made between a disturbed and quiet day. A novel result from this study is the finding of correlated oscillations between parallel and perpendicular ion velocity components which are apparently storm induced. Previously, these oscillations have been observed primarily at night, but now it's noticed that during storm conditions there are prominent oscillations during the day.

  20. TTUS FP&C Design & Building Standards Division 8 Doors & Windows

    E-Print Network [OSTI]

    Gelfond, Michael

    8 ­ Doors & Windows General Energy conservation and sustainable design must be given thorough with State Energy Code and ASHRAE 90.1. Energy Efficient Exterior Openings shall comply with minimumTTUS FP&C Design & Building Standards Division 8 ­ Doors & Windows Page 1 of 11 Division

  1. Reliability Assessment of Mass-Market Software: Insights from Windows Vista

    E-Print Network [OSTI]

    Khambatt, Mujtaba

    Reliability Assessment of Mass-Market Software: Insights from Windows Vista® Paul Luo Li, Mingtian Ni, Song Xue, Joseph P. Mullally, Mario Garzia, Mujtaba Khambatti Microsoft Windows Reliability Team One Microsoft Way Redmond, WA USA Paul.Li@Microsoft.com Abstract Assessing the reliability of mass

  2. Window Spacers and Edge Seals in Insulating Glass Units: A State-of-the-Art

    E-Print Network [OSTI]

    carbon dioxide (CO2) emissions in buildings is by increasing the thermal performance of their envelopes. Gustavsen Norwegian University of Science and Technology Windows and Envelope Materials Group Building), Windows & Envelope Materials Group, Berkeley, CA 94720- 8134, USA Abstract Insulating glass (IG) units

  3. Design Windows for a He Cooled Fusion Reactor* Dai-Kai Sze and Ahmed Hassanein

    E-Print Network [OSTI]

    Harilal, S. S.

    Design Windows for a He Cooled Fusion Reactor* Dai-Kai Sze and Ahmed Hassanein Argonne National Laboratory 9700 South Cass Avenue, Argonne, IL 60439 EQUATIONDERIVATION ABSTRACT A design window concept is developed for a He-cooled fusion reactor blanket and divertor design. This concept allows study

  4. Author's personal copy The time dependent vehicle routing problem with time windows

    E-Print Network [OSTI]

    Bertini, Robert L.

    : (a) formulate a time dependent vehicle routing problem with a general cost function and time windowAuthor's personal copy The time dependent vehicle routing problem with time windows: Benchmark College of Engineering and Computer Science, PO Box 0751, Portland State University, Portland, OR 97207

  5. Silver nanowire transparent electrodes for liquid crystal-based smart windows

    E-Print Network [OSTI]

    Goldthorpe, Irene

    privacy glass or as energy saving windows through the modulation of solar heat gain [1,3,4]. The operating sheet resistance, and low-cost. While the benefits of increased transparency and low-cost are obvious Polymer dispersed liquid crystal Smart window a b s t r a c t A significant manufacturing cost of polymer

  6. Plasmonic Metamaterials and Nanocomposites with the Narrow Transparency Window Effect in Broad Extinction Spectra

    E-Print Network [OSTI]

    Demir, Hilmi Volkan

    Plasmonic Metamaterials and Nanocomposites with the Narrow Transparency Window Effect in Broad from 400 nm to 5 m but exhibit a narrow transparency window centered at a given wavelength. The main be designed as a solution, nanocomposite film or metastructure. The principle of the formation

  7. Daylighting control performance of a thin-film ceramic electrochromic window: field study results

    E-Print Network [OSTI]

    1 Daylighting control performance of a thin-film ceramic electrochromic window: field study results of this emerging technology. Keywords: Building energy-efficiency; Electrochromic windows; Daylighting; Control switched across their dynamic range and could be fully integrated into a complete daylight, glare

  8. Empirical assessment of a prismatic daylight-redirecting window film in a full-scale office

    E-Print Network [OSTI]

    LBNL-6496E Empirical assessment of a prismatic daylight- redirecting window film in a full in Leukos, the journal of the IESNA. Empirical assessment of a prismatic daylight- redirecting window film Laboratory, Mailstop 90-3111, 1 Cyclotron Road, Berkeley, CA 94720 USA Abstract Daylight redirecting systems

  9. Three-tank hoist scheduling problem with unbounded or zero-width processing windows

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Three-tank hoist scheduling problem with unbounded or zero-width processing windows Fabien Mangione, the products are transferred in successive tanks by a hoist. Moreover, each processing time is nested between of identical parts in a balanced three-tank line. We prove that for zero-width or unbounded processing windows

  10. System Cost Analysis for an Interior Permanent Magnet Motor

    SciTech Connect (OSTI)

    Peter Campbell

    2008-08-01T23:59:59.000Z

    The objective of this program is to provide an assessment of the cost structure for an interior permanent magnet ('IPM') motor which is designed to meet the 2010 FreedomCAR specification. The program is to evaluate the range of viable permanent magnet materials for an IPM motor, including sintered and bonded grades of rare earth magnets. The study considers the benefits of key processing steps, alternative magnet shapes and their assembly methods into the rotor (including magnetization), and any mechanical stress or temperature limits. The motor's costs are estimated for an annual production quantity of 200,000 units, and are broken out into such major components as magnetic raw materials, processing and manufacturing. But this is essentially a feasibility study of the motor's electromagnetic design, and is not intended to include mechanical or thermal studies as would be done to work up a selected design for production.

  11. The Age and Interior Rotation of Stars from Asteroseismology

    E-Print Network [OSTI]

    Aerts, Conny

    2015-01-01T23:59:59.000Z

    We provide a status report on the determination of stellar ages from asteroseismology for stars of various masses and evolutionary stages. The ability to deduce the ages of stars with a relative precision of typically 10 to 20% is a unique opportunity for stellar evolution and also of great value for both galactic and exoplanet studies. Further, a major uncalibrated ingredient that makes stellar evolution models uncertain, is the stellar interior rotation frequency $\\Omega(r)$ and its evolution during stellar life. We summarize the recent achievements in the derivation of $\\Omega(r)$ for different types stars, offering stringent observational constraints on theoretical models. Core-to-envelope rotation rates during the red giant stage are far lower than theoretical predictions, pointing towards the need to include new physical ingredients that allow strong and efficient coupling between the core and the envelope in the models of low-mass stars in the evolutionary phase prior to the core helium burning. Stars ...

  12. Establishment of a Rating Program for Pre- and Post-Fabricated Windows

    SciTech Connect (OSTI)

    Parker, Graham B.; Mapes, Terry S.; Shah, B.; Bloyd, Cary N.

    2011-08-01T23:59:59.000Z

    This document was prepared to support the Smart Buildings-Material Testing and Rating Centres (SB-2) activity of the Asia-Pacific Economic Cooperation (APEC) Energy Smart Communities Initiative (ESCI). The ESCI was put forward by APEC Leaders at the 2010 meeting in Japan. APEC is the premier forum for facilitating economic growth, cooperation, trade and investment in the Asia-Pacific region. This document addresses the testing and certification of building products and equipment to support building energy codes, focusing specifically on energy-efficient factory-built windows. It sets forth a proposed structure for an APEC economy to establish a testing, rating, certification, and labeling program for efficient factory-built windows. In the context of this document, efficient windows would be windows made with insulating glass (IG) and an efficient frame assembly. The minimum efficiency metric (or thermal performance) for these windows is not quantified in this document and would generally be established by a governmental agency.

  13. Method of fabricating a microelectronic device package with an integral window

    DOE Patents [OSTI]

    Peterson, Kenneth A. (Albuquerque, NM); Watson, Robert D. (Tijeras, NM)

    2003-01-01T23:59:59.000Z

    A method of fabricating a microelectronic device package with an integral window for providing optical access through an aperture in the package. The package is made of a multilayered insulating material, e.g., a low-temperature cofired ceramic (LTCC) or high-temperature cofired ceramic (HTCC). The window is inserted in-between personalized layers of ceramic green tape during stackup and registration. Then, during baking and firing, the integral window is simultaneously bonded to the sintered ceramic layers of the densified package. Next, the microelectronic device is flip-chip bonded to cofired thick-film metallized traces on the package, where the light-sensitive side is optically accessible through the window. Finally, a cover lid is attached to the opposite side of the package. The result is a compact, low-profile package, flip-chip bonded, hermetically-sealed package having an integral window.

  14. Mechanical Research and Development of monocrystalline silicon neutron beam window for CSNS

    E-Print Network [OSTI]

    Zhou Liang; Qu Hua-Min

    2014-11-24T23:59:59.000Z

    The monocrystalline silicon neutron beam window is one of the key components of neutron spectrometers and thin circular plate.Monocrystalline silicon is a brittle material and its strength is not constant but is consistent with the Weibull distribution. The window is designed not simply through the average strength, but according to the survival rate. Bending deformation is the main form of the window, so dangerous parts of the neutron beam window is stress-linearized to the combination of membrane stress and bending stress. According to the Weibull distribution of bending strength of monocrystalline silicon based on a large number of experimental data, finally the optimized neutron beam window is 1.5mm thick. Its survival rate is 0.9994 and its transmittance is 0.98447; it meets both physical requirements and the mechanical strength.

  15. Performance Analysis of Contention Window Cheating Misbehaviors in Mobile Ad Hoc Networks

    E-Print Network [OSTI]

    Kalaiarasi, R; Pari, S Neelavathy; Sridharan, D

    2010-01-01T23:59:59.000Z

    Mobile Ad Hoc Network (MANET) is a collection of nodes that can be rapidly deployed as a multi-hop network without the aid of any centralized administration. Misbehavior is challenged by bandwidth and energy efficient medium access control and fair share of throughput. Node misbehavior plays an important role in MANET. In this survey, few of the contention window misbehavior is reviewed and compared. The contention window cheating either minimizes the active communication of the network or reduces bandwidth utilization of a particular node. The classification presented is in no case unique but summarizes the chief characteristics of many published proposals for contention window cheating. After getting insight into the different contention window misbehavior, few of the enhancements that can be done to improve the existing contention window are suggested. The purpose of this paper is to facilitate the research efforts in combining the existing solutions to offer more efficient methods to reduce contention win...

  16. The Solar Heavy Element Abundances: I. Constraints from Stellar Interiors

    E-Print Network [OSTI]

    Franck Delahaye; Marc Pinsonneault

    2005-11-29T23:59:59.000Z

    The latest solar atmosphere models include non-LTE corrections and 3D hydrodynamic convection simulations. These models predict a significant reduction in the solar metal abundance, which leads to a serious conflict between helioseismic data and the predictions of solar interiors models. We demonstrate that the helioseismic constraints on the surface convection zone depth and helium abundance combined with stellar interiors models can be used to define the goodness of fit for a given chemical composition. After a detailed examination of the errors in the theoretical models we conclude that models constructed with the older solar abundances are consistent (seismic data. Models constructed with the proposed new low abundance scale are strongly disfavored, disagreeing at the 15 \\sigma level. We then use the sensitivity of the seismic properties to abundance changes to invert the problem and infer a seismic solar heavy element abundance mix with two components: meteoritic abundances, and the light metals CNONe. Seismic degeneracies between the best solutions for the elements arise for changes in the relative CNONe abundances and their effects are quantified. We obtain Fe/H=7.50+/-0.045+/-0.003(CNNe) and O/H=8.86+/-0.041+/-0.025(CNNe) for the relative CNNe in the GS98 mixture. The inferred solar oxygen abundance disagree with the abundance inferred from the 3D hydro models. Changes in the Ne abundance can mimic changes in O for the purposes of scalar constraints.Models constructed with low oxygen and high neon are inconsistent with the solar sound speed profile. The implications for the solar abundance scale are discussed.

  17. Annual Report: 2011-2012 Storm Season Sampling, Non-Dry Dock Stormwater Monitoring for Puget Sound Naval Shipyard, Bremerton, WA

    SciTech Connect (OSTI)

    Brandenberger, Jill M.; Metallo, David; Rupert, Brian; Johnston, Robert K.; Gebhart, Christine

    2013-07-03T23:59:59.000Z

    Annual PSNS non-dry dock storm water monitoring results for 2011-2012 storm season. Included are a brief description of the sampling procedures, storm event information, laboratory methods and data collection, a results and discussion section, and the conclusions and recommendations.

  18. P9.137 The SPC Storm-Scale Ensemble of Opportunity: Overview and Results from the 2012 Hazardous Weather Testbed Spring Forecasting Experiment

    E-Print Network [OSTI]

    P9.137 The SPC Storm-Scale Ensemble of Opportunity: Overview and Results from the 2012 Hazardous) available to forecasters at the Storm Prediction Center (SPC) has been increasing over the past few years to examine and scrutinize the data in creating a forecast has not changed. Thus, the concept of the SPC Storm

  19. Direct climate effect of black carbon in China and its impact on dust storms

    E-Print Network [OSTI]

    Liou, K. N.

    .shtml, 22 March 2002). [3] Observations indicate that the total days of dust storm occurrence per yearClick Here for Full Article Direct climate effect of black carbon in China and its impact on dust and the surrounding areas critically impact weather, climate, and public health in China and neighboring Pacific Rim

  20. Annual Storm Water Report for the Y-12 National Security Complex Oak Ridge, Tennessee

    SciTech Connect (OSTI)

    None

    2013-12-01T23:59:59.000Z

    This is the second annual storm water report prepared in accordance with the National Pollutant Discharge Elimination System (NPDES) permit issued to the Y-12 National Security Complex (Y-12 Complex) on December 1, 2011, and the corresponding Y-12 Storm Water Pollution Prevention Plan (SWP3) which became effective on September 7, 2012. However, Appendix A does contain some analytical data gathered under the previous NPDES permit and SWP3 for comparison purposes. The quality of storm water exiting the Y-12 Complex via East Fork Poplar Creek remained relatively stable from 2012 to 2013. However, there was one largely unexpected high concentration of mercury noted in an area that is not known to have previously been a mercury use area. This was noted in Sector AA, Outfall 014. This outfall is normally sampled on a rotating basis but, due this elevated concentration, will be sampled again in 2014. The Y-12 Complex will continue to implement appropriate BMPs and reduce outside material storage ares where possible. Emphasis will continue to be placed on site inspections and timely implementation of proper storm water control measures.

  1. Optimal Location of Infiltration-Based Best Management Practices for Storm Water Management

    E-Print Network [OSTI]

    Vogel, Richard M.

    Optimal Location of Infiltration-Based Best Management Practices for Storm Water Management and water quality impacts. The concept of best manage- ment practices BMPs encompasses a wide variety with a genetic algorithm to determine the optimal location of infiltration-based best management practices BMPs

  2. Green's function approximation from cross-correlations of 20100 Hz noise during a tropical storm

    E-Print Network [OSTI]

    Gerstoft, Peter

    Green's function approximation from cross-correlations of 20­100 Hz noise during a tropical storm Approximation of Green's functions through cross-correlation of acoustic signals in the ocean, a method referred-bottom-reflected interarray hydrophone travel times. The extracted Green's function depends on the propagating noise

  3. Granulometric characterization of sediments transported by surface runoff generated by moving storms

    E-Print Network [OSTI]

    de Lima, J. L. M. P.; Souza, C. C. S.; Singh, V. P.

    2008-12-16T23:59:59.000Z

    to investigate the influence of moving rainfall storms on the dynamics of sediment transport by surface runoff. Experiments were carried out, using a rain simulator and a soil flume. The movement of rainfall was generated by moving the rain simulator at a...

  4. Using Reconstructed Dust Climatology to Study the Impacts of Martian Dust Storms on Dynamics

    E-Print Network [OSTI]

    Cambridge, University of

    Using Reconstructed Dust Climatology to Study the Impacts of Martian Dust Storms on Dynamics L@atm.ox.ac.uk) Abstract We have reconstructed the climatology of the dust on Mars using available retrievals and estimates) a reconstruction of the dust optical depth climatology based on weighted gridding for Martian years 24

  5. Analytical study of the energy rate balance equation for the magnetospheric storm-ring current

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Analytical study of the energy rate balance equation for the magnetospheric storm-ring current A. L of the analytical integration of the energy rate balance equation, assum- ing that the input energy rate of the energy function to ht times a constant factor in the energy rate balance equation (e.g. Gonzalez et al

  6. An Efficient, General-Purpose Technique to Identify Storm Cells in Geospatial Images

    E-Print Network [OSTI]

    Lakshmanan, Valliappa

    An Efficient, General-Purpose Technique to Identify Storm Cells in Geospatial Images Valliappa and are not transferrable between different types of geospatial images. Yet, with the multitude of remote sensing on different types of geospatial radar and satel- lite images. Pointers are provided on the effective choice

  7. The Automatic Predictability of Super Geomagnetic Storm from Halo CMEs Associated with Large Solar Flares

    E-Print Network [OSTI]

    magnetopause and this reconnection transports energy from the solar wind into the magnetosphere (Dungey 1961.S.A Big Bear Solar Observatory, 40386 North Shore Lane, Big Bear City, CA 92314 U.S.A. Feb. 25, 2006 control systems, damage of electric power grids, etc. A geomagnetic storm is initiated when the energy

  8. Environmental control of cloud-to-ground lightning polarity in severe storms

    E-Print Network [OSTI]

    Buffalo, Kurt Matthew

    2008-10-10T23:59:59.000Z

    polarity of severe storms by directly affecting their structural, dynamical, and microphysical properties, which in turn directly control cloud electrification and CG flash polarity. A more specific hypothesis, which has been supported by past............................................................................... 23 a. Thunderstorm electrification ................................................ 23 1) Charging mechanisms and typical charge structure ... 23 2) Cloud-to-ground lightning flash................................. 27 3...

  9. Global P, PP, and PKP wave microseisms observed from distant storms

    E-Print Network [OSTI]

    Buckingham, Michael

    , and there is thus no coupling of ocean-wave energy at the primary frequency into seismic energy at the seafloor cannot generate primary microseisms in deep water, this energy is most likely generated by coastalGlobal P, PP, and PKP wave microseisms observed from distant storms Peter Gerstoft,1 Peter M

  10. 262 SDSU General Catalog 2014-2015 OFFICE: Storm Hall 314

    E-Print Network [OSTI]

    Gallo, Linda C.

    as the arrangement of societies on the earth's surface, water and land use patterns, urban- ization and urban life262 SDSU General Catalog 2014-2015 OFFICE: Storm Hall 314 TELEPHONE: 619-594-5437 / FAX: 619 modeling applied to environmental, ecological, health, and geographical systems, is the third holder

  11. Seasonal variation of upper-level mobile trough development upstream of the Pacific storm track

    E-Print Network [OSTI]

    Myoung, Boksoon

    2002-01-01T23:59:59.000Z

    is to provide at least a partial explanation of midwinter suppression of the Pacific storm track. From 19 years of analysis, a strong stretching deformation zone (DZ) is defined over East Asia. We examine the number, average intensity and intensity change...

  12. The Prediction of Extratropical Storm Tracks by the ECMWF and NCEP Ensemble Prediction Systems

    E-Print Network [OSTI]

    Begstsson, Lennart

    The Prediction of Extratropical Storm Tracks by the ECMWF and NCEP Ensemble Prediction Systems Author: Email: lsrf@mail.nerc-essc.ac.uk #12;Abstract The prediction of extratropical cyclones Prediction (NCEP) Ensemble Prediction Systems (EPS) has been investigated using an objective feature tracking

  13. The Prediction of Extratropical Storm Tracks by the ECMWF and NCEP Ensemble Prediction Systems

    E-Print Network [OSTI]

    Froude, Lizzie

    The Prediction of Extratropical Storm Tracks by the ECMWF and NCEP Ensemble Prediction Systems 2006) ABSTRACT The prediction of extratropical cyclones by the European Centre for Medium-Range Weather Forecasts (ECMWF) and the National Centers for Environmental Prediction (NCEP) ensemble prediction systems

  14. Interactions between Catchbasin and Street Cleaning in Urban Drainages and Sediment Transport in Storm Drainage Systems

    E-Print Network [OSTI]

    Pitt, Robert E.

    1 Interactions between Catchbasin and Street Cleaning in Urban Drainages and Sediment Transport ...................................................................................................................................................................24 Abstract Much research has been conducted on the transport, settling, and scour of gross solids transport in separate storm drainage has not been considered to be a significant problem for public works

  15. On the current conditions along the Ormen Lange pipeline path during an extreme, idealized storm

    E-Print Network [OSTI]

    Avlesen, Helge

    On the current conditions along the Ormen Lange pipeline path during an extreme, idealized storm-shore for processing by means of a pipeline. Due to the abrupt topography this pipeline will have many long free spans along a possible path for the pipeline, and in a simulation study the effects on the flow due

  16. Ice storm impacts on woody debris and debris dam formation in northeastern U.S. streams

    E-Print Network [OSTI]

    Kraft, Clifford E.

    Ice storm impacts on woody debris and debris dam formation in northeastern U.S. streams Clifford E and associated streams. During 1999 and 2000, tree canopy damage, stream physical habitat, and wood deposition were evaluated within 51 first-, second-, and third-order streams located within five eastern

  17. Increase of storm events during the Holocene cold events in NW Mediterranean Sea

    E-Print Network [OSTI]

    Demouchy, Sylvie

    The Mediterranean region is one of the world's areas most vulnerable to the climate change (Giorgi, 2006). Regional cyclone development over the Mediterranean Sea under future climate change conditions. However the Mediterranean climate at Holocene timescale, in relation to severe storm activity 1. Introduction

  18. Intense storm activity during the Little Ice Age on the French Mediterranean coast L. Dezileau a,

    E-Print Network [OSTI]

    Demouchy, Sylvie

    storm activity is important for assessing whether changes are controlled by climate evolution response will be crucial to predicting the impacts of future climate change. © 2010 Elsevier B.V. All pre-industrial times (Solomon et al., 2007). The effects of climate change on extreme events

  19. CBER-DETR Nevada Coincident and Leading Employment Storm Clouds Darkening Again on the Nevada Economy

    E-Print Network [OSTI]

    Ahmad, Sajjad

    Statistics. The Nevada Coincident Employment Index includes four employment measures ­ household employmentCBER-DETR Nevada Coincident and Leading Employment Indexes1 Storm Clouds Darkening Again on the Nevada Economy The Nevada Coincident Employment Index measures the ups and downs of the Nevada economy

  20. Sensitivity of the wind stress and storm surges to surface drag

    E-Print Network [OSTI]

    Vries, Hans de

    - 29 April 2009 , CD zU ln~ #12;Background Air-Sea Interaction High and/or extreme wind speeds , CD ? #12;Background Air-Sea Interaction High and/or extreme wind speeds ­ Dynamics Sensitivity High and/or extreme wind speeds ­ Dynamics Sensitivity of the wind stress and storm surges to surface

  1. The potential of wetlands in reducing storm surge Ty V. Wamsley a,, Mary A. Cialone a

    E-Print Network [OSTI]

    US Army Corps of Engineers

    The potential of wetlands in reducing storm surge Ty V. Wamsley a,Ã?, Mary A. Cialone a , Jane M to be the potential contribution of wetlands to the lowering of surges as they propagate inland from the coast. Consequently, an accurate method to quantify the effect of wetlands on coastal surge levels is required

  2. Geosynthetic Filters for Water Quality Improvement of Urban Storm Water Runoff

    E-Print Network [OSTI]

    Aydilek, Ahmet

    water treatment are retention ponds, detention basins, wetland ponds, and grass swales (Strecker et al are common subsurface storm water runoff treatment systems used in urban areas. Large subsurface fil- ters the treatment system (SEMCOG 2008). Removal of filtration media such as sand is highly labor

  3. Expert Meeting Report: Interior Insulation Retrofit of Mass Masonry Wall Assemblies

    SciTech Connect (OSTI)

    Ueno, K.; Van Straaten, R.

    2012-02-01T23:59:59.000Z

    The Building Science Consortium held an Expert Meeting on Interior Insulation Retrofit of Mass Masonry Wall Assemblies on July 30, 2011 at the Westford Regency Hotel in Westford, MA. This report outlines the extensive information that was presented on assessment of risk factors for premature building deterioration due to interior insulation retrofits, and methods to reduce such risks.

  4. Primal-Dual Interior Point Method Applied to the Short Term Hydroelectric Scheduling Including a

    E-Print Network [OSTI]

    Oliveira, Aurélio R. L.

    Primal-Dual Interior Point Method Applied to the Short Term Hydroelectric Scheduling Including that minimizes losses in the transmission and costs in the generation of a hydroelectric power system, formulated such perturbing parameter. Keywords-- Hydroelectric power system, Network flow, Predispatch, Primal-dual interior

  5. U.S. Department of the Interior U.S. Geological Survey

    E-Print Network [OSTI]

    , William R. Knight, Kate Long, Patrick Lynett, Carl E. Mortensen, Dmitry J. Nicolsky, Suzanne C. Perry, Jose C. Borrero, Deborah M. Brosnan, John T. Bwarie, Eric L. Geist, Laurie A. Johnson, Stephen H. Kirby.S. Department of the Interior U.S. Geological Survey #12;iii U.S. Department of the Interior SALLY JEWELL

  6. Industrial Use of Fish Oils UNITED STATES DEPART MENT OF THE INTERIOR

    E-Print Network [OSTI]

    Industrial Use of Fish Oils UNITED STATES DEPART MENT OF THE INTERIOR FISH AND WILDLIFE SERVICE BUREAU OF COMMERCIAL FISHERIES #12;Industrial Use of Fish Oils UNITED STATES DEPART MENT OF THE INTERIOR 16 IIndustrial Use of Fish Oils INTRODUCTION The world's waters annually produce a tremendous harwst

  7. Roadmap: Interior Design Bachelor of Arts College of Architecture and Environmental Design

    E-Print Network [OSTI]

    Sheridan, Scott

    Roadmap: Interior Design ­ Bachelor of Arts [AE-BA-ID] College of Architecture and Environmental;Roadmap: Interior Design ­ Bachelor of Arts [AE-BA-ID] College of Architecture and Environmental Design and Human Behavior 3 C ARCH 10012 Survey of Architectural History II 3 Fulfills Kent Core Fine Arts MATH

  8. UNLV School of Architecture BACHELOR OF SCIENCE INTERIOR ARCHITECTURE AND DESIGN

    E-Print Network [OSTI]

    Hemmers, Oliver

    UNLV School of Architecture BACHELOR OF SCIENCE INTERIOR ARCHITECTURE AND DESIGN 4505 south maryland parkway, las vegas, nevada 89145-4018 telephone: 702 895 3031 fax: 702 895 1119 http://architecture everything the world has to offer, andwemakeitourown." Undergraduate Program in Interior Architecture

  9. Design of Double Salient Interior Permanent Magnet Machine Based on Mutually Coupled

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Design of Double Salient Interior Permanent Magnet Machine Based on Mutually Coupled Reluctance--This paper presents a novel structure of double salient interior permanent magnet machine (DSIPM machine-- double salient, d-axis and q-axis inductances, cogging torque, permanent magnets, flux

  10. State-of-the-Art Highly Insulating Window Frames - Research and Market Review

    SciTech Connect (OSTI)

    Gustavsen, Arild; Jelle, Bjorn Petter; Arasteh, Dariush; Kohler, Christian

    2007-01-01T23:59:59.000Z

    This document reports the findings of a market and research review related to state-of-the-art highly insulating window frames. The market review focuses on window frames that satisfy the Passivhaus requirements (window U-value less or equal to 0.8 W/m{sup 2}K ), while other examples are also given in order to show the variety of materials and solutions that may be used for constructing window frames with a low thermal transmittance (U-value). The market search shows that several combinations of materials are used in order to obtain window frames with a low U-value. The most common insulating material seems to be Polyurethane (PUR), which is used together with most of the common structural materials such as wood, aluminum, and PVC. The frame research review also shows examples of window frames developed in order to increase the energy efficiency of the frames and the glazings which the frames are to be used together with. The authors find that two main tracks are used in searching for better solutions. The first one is to minimize the heat losses through the frame itself. The result is that conductive materials are replaced by highly thermal insulating materials and air cavities. The other option is to reduce the window frame area to a minimum, which is done by focusing on the net energy gain by the entire window (frame, spacer and glazing). Literature shows that a window with a higher U-value may give a net energy gain to a building that is higher than a window with a smaller U-value. The net energy gain is calculated by subtracting the transmission losses through the window from the solar energy passing through the windows. The net energy gain depends on frame versus glazing area, solar factor, solar irradiance, calculation period and U-value. The frame research review also discusses heat transfer modeling issues related to window frames. Thermal performance increasing measures, surface modeling, and frame cavity modeling are among the topics discussed. The review shows that the current knowledge gives the basis for improving the calculation procedures in the calculation standards. At the same time it is room for improvement within some areas, e.g. to fully understand the natural convection effects inside irregular vertical frame cavities (jambs) and ventilated frame cavities.

  11. To be submitted to Solar Energy. Daylight performance of a microstructured prismatic window film in deep open

    E-Print Network [OSTI]

    To be submitted to Solar Energy. Daylight performance of a microstructured prismatic window film Systems Department, Environmental Energy Technologies Division, Lawrence Berkeley National Laboratory with vertical windows have the potential to offset lighting energy use in deep perimeter zones

  12. Two-Dimensional Computational Fluid Dynamics and Conduction Simulations of Heat Transfer in Horizontal Window Frames with Internal Cavities

    E-Print Network [OSTI]

    Gustavsen, Arlid

    2008-01-01T23:59:59.000Z

    window frames; To the left, a PVC window frame (S1) and toaluminum frame, S3 (left) and PVC frame, S4 (right) Figuremade of polyvinyl chloride (PVC) and two of aluminum. For

  13. Design of an Aluminum Proton Beam Window for the Spallation Neutron Source

    SciTech Connect (OSTI)

    Janney, Jim G [ORNL; McClintock, David A [ORNL

    2012-01-01T23:59:59.000Z

    An aluminum proton beam window design is being considered at the Spallation Neutron Source primarily to increase the lifetime of the window, with secondary advantages of higher beam transport efficiency and lower activation. The window separates the core vessel, the location of the mercury target, from the vacuum of the accelerator, while withstanding the pass through of a proton beam of up to 2 MW with 1.0 GeV proton energy. The current aluminum alloy being investigated for the window material is 6061-T651 due to its combination of high strength, high thermal conductivity, and good resistance to aqueous corrosion, as well as demonstrated dependability in previous high-radiation environments. The window design will feature a thin plate with closely spaced cross drilled cooling holes. An analytical approach was used to optimize the dimensions of the window before finite element analysis was used to simulate temperature profiles and stress fields resulting from thermal and static pressure loading. The resulting maximum temperature of 60 C and Von Mises stress of 71 MPa are very low compared to allowables for Al 6061-T651. A significant challenge in designing an aluminum proton beam window for SNS is integrating the window with the current 316L SS shield blocks. Explosion bonding was chosen as a joining technique because of the large bonding area required. A test program has commenced to prove explosion bonding can produce a robust vacuum joint. Pending successful explosion bond testing, the aluminum proton beam window design will be proven acceptable for service in the Spallation Neutron Source.

  14. Submitted to Energy and Buildings February 23, 2005 and accepted for publication March 1, 2006. Subject responses to electrochromic windows

    E-Print Network [OSTI]

    . LBNL-57125 Subject responses to electrochromic windows R.D. Clear* , V. Inkarojrit, E.S. Lee Building in a private office with switchable electrochromic windows, manually- operated Venetian blinds, and dimmable fluorescent lights. The electrochromic window had a visible transmittance range of approximately 3

  15. A Step Towards Conservation for Interior Alaska Tribes

    SciTech Connect (OSTI)

    Kimberly Carlo

    2012-07-07T23:59:59.000Z

    This project includes a consortium of tribes. The tribes include Hughes (representing the consortium) Birch Creek, Huslia, and Allakaket. The project proposed by Interior Regional Housing Authority (IRHA) on behalf of the villages of Hughes, Birch Creek, Huslia and Allakaket is to develop an energy conservation program relevant to each specific community, educate tribe members and provide the tools to implement the conservation plan. The program seeks to achieve both energy savings and provide optimum energy requirements to support each tribe's mission. The energy management program will be a comprehensive program that considers all avenues for achieving energy savings, from replacing obsolete equipment, to the design and construction of energy conservation measures, the implementation of energy saving operation and maintenance procedures, the utilization of a community-wide building energy management system, and a commitment to educating the tribes on how to decrease energy consumption. With the implementation of this program and the development of an Energy Management Plan, these communities can then work to reduce the high cost of living in rural Alaska.

  16. Interior Permanent Magnet Reluctance Machine with Brushless Field Excitation

    SciTech Connect (OSTI)

    Wiles, R.H.

    2005-10-07T23:59:59.000Z

    In a conventional permanent magnet (PM) machine, the air-gap flux produced by the PM is fixed. It is difficult to enhance the air-gap flux density due to limitations of the PM in a series-magnetic circuit. However, the air-gap flux density can be weakened by using power electronic field weakening to the limit of demagnetization of the PMs. This paper presents the test results of controlling the PM air-gap flux density through the use of a stationary brushless excitation coil in a reluctance interior permanent magnet with brushless field excitation (RIPM-BFE) motor. Through the use of this technology the air-gap flux density can be either enhanced or weakened. There is no concern with demagnetizing the PMs during field weakening. The leakage flux of the excitation coil through the PMs is blocked. The prototype motor built on this principle confirms the concept of flux enhancement and weakening through the use of excitation coils.

  17. Analysis of oil-pipeline distribution of multiple products subject to delivery time-windows

    E-Print Network [OSTI]

    Jittamai, Phongchai

    2006-04-12T23:59:59.000Z

    This dissertation defines the operational problems of, and develops solution methodologies for, a distribution of multiple products into oil pipeline subject to delivery time-windows constraints. A multiple-product oil pipeline is a pipeline system...

  18. Galadriel: A Display List-Based Window Manager Graphics Workstation Division

    E-Print Network [OSTI]

    Lewis, Robert R.

    to a VAX (780) running an internal Tek version of (relatively standard) 4.2bsd UNIX. So far, it's been'' is about as close as we could come to a mythological ``window manager''. VAX and VT100 are trademarks

  19. Playing in the X-Games Window on the Extreme Universe

    E-Print Network [OSTI]

    Playing in the X-Games Window on the Extreme Universe Yucca Mountain The Unseen Scholars 1663 LOS, TECHNOLOGY, AND ENGINEERING 2 8 20 Trident MAJOR PLAYER IN THE X-GAMES OF CONTEMPORARY SCIENCE Yucca Mountain

  20. Electrochromic windows for commercial buildings: Monitored results from a full-scale testbed

    E-Print Network [OSTI]

    Lee, Eleanor S.; DiBartolomeo, Dennis L.; Selkowitz, Stephen E.

    2000-01-01T23:59:59.000Z

    electrochromic window products will appear on the market.market and technology assessments apply conventional life-cycle cost analysis methods to determine the viability of electrochromicmarket assessments have been conducted by industry, but this information remains proprietary. Electrochromic

  1. Thin Metal Oxide Films to Modify a Window Layer in CdTe-Based...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for Improved Performance. Thin Metal Oxide Films to Modify a Window Layer in CdTe-Based Solar Cells for Improved Performance. Abstract: We report on CdSCdTe photovoltaic devices...

  2. Drafty Windows: Is it Better to Insulate or Replace Them? | Department...

    Broader source: Energy.gov (indexed) [DOE]

    expensive method is a simple window insulation kit, which includes a large sheet of plastic and double-sided tape; the most expensive (and most efficient) method is to replace...

  3. Evaluation of NTE Windows and a Work-Based Method to Determine...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and a Work-Based Method to Determine In-Use Emissions of a Heavy-Duty Diesel Engine Evaluation of NTE Windows and a Work-Based Method to Determine In-Use Emissions of a...

  4. Window-Related Energy Consumption in the US Residential and Commercial Building Stock

    E-Print Network [OSTI]

    Apte, Joshua; Arasteh, Dariush

    2008-01-01T23:59:59.000Z

    window related primary energy consumption of the US building= 1.056 EJ. “Primary” energy consumption includes a site-to-the amount of primary energy consumption required by space

  5. Copper Doped GaAs Infrared Filter for the 8-13 m Atmospheric Window

    E-Print Network [OSTI]

    Peale, Robert E.

    regions of interest, such as atmospheric transmission windows. Filters exclude solar or thermal photonsCdTe is typically melt grown in a high temperature furnace. All three elements in this alloy are toxic. Stability

  6. Design and validation of an air window for a molten salt solar thermal receiver

    E-Print Network [OSTI]

    Paxson, Adam Taylor

    2009-01-01T23:59:59.000Z

    This thesis contributes to the development of Concentrating Solar Power (CSP) receivers and focuses on the design of an efficient aperture. An air window is proposed for use as the aperture of a CSP molten salt receiver ...

  7. State-of-the-Art Highly Insulating Window Frames - Research and Market Review

    E-Print Network [OSTI]

    Gustavsen, Arild

    2008-01-01T23:59:59.000Z

    analysis investigation of a PVC window frame naturally agedThermix / TGI-wave 1.23 x 1.48 PVC profile with PUR (? =TOPLINE Plus Rahmenmaterial: PVC- Profile, Kammern mit PU

  8. [send to printer] [close this window] What's Happening from Environmental Building News

    E-Print Network [OSTI]

    [send to printer] [close this window] What's Happening from Environmental Building News July 1-by-step move toward the goals of Architecture 2030's "2030 Challenge" to eliminate fossil-fuel use in all new

  9. The Window Market in Texas: Opportunities for Energy Savings and Demand Reduction

    E-Print Network [OSTI]

    Zarnikau, J.; Campbell, L.

    2002-01-01T23:59:59.000Z

    The use of high performance windows represents a promising opportunity to reduce energy consumption and summer electrical demand in homes and commercial buildings in Texas and neighboring states. While low-e glass coatings and other energy...

  10. Landscape fragmentation and ice storm damage in eastern ontario forests J. Pasher and D.J. King*

    E-Print Network [OSTI]

    1998). Due to interactions amongst biological and physiographic factors, damage and mortality, such as wind- storms and fire, which have return times of 100­ 1000 years (Van Dyke 1999). Large-scale ice

  11. Johns, R. H., D. W. Burgess, C. A. Doswell III, M. S. Gilmore, J. A. Hart, and S. F. Piltz, 2013: The 1925 Tri-State tornado damage path and associated storm system. Electronic J. Severe Storms Meteor., 8 (2), 133.

    E-Print Network [OSTI]

    Doswell III, Charles A.

    mi) east-northeast of the apparent end of the Tri- State tornado damage path in Pike County, IN: The 1925 Tri- State tornado damage path and associated storm system. Electronic J. Severe Storms Meteor., 8 (2), 1­33. 1 The 1925 Tri-State Tornado Damage Path and Associated Storm System ROBERT H. JOHNS

  12. STORMVEX: The Storm Peak Lab Cloud Property Validation Experiment Science and Operations Plan

    SciTech Connect (OSTI)

    Mace, J; Matrosov, S; Shupe, M; Lawson, P; Hallar, G; McCubbin, I; Marchand, R; Orr, B; Coulter, R; Sedlacek, A; Avallone, L; Long, C

    2010-09-29T23:59:59.000Z

    During the Storm Peak Lab Cloud Property Validation Experiment (STORMVEX), a substantial correlative data set of remote sensing observations and direct in situ measurements from fixed and airborne platforms will be created in a winter season, mountainous environment. This will be accomplished by combining mountaintop observations at Storm Peak Laboratory and the airborne National Science Foundation-supported Colorado Airborne Multi-Phase Cloud Study campaign with collocated measurements from the second ARM Mobile Facility (AMF2). We describe in this document the operational plans and motivating science for this experiment, which includes deployment of AMF2 to Steamboat Springs, Colorado. The intensive STORMVEX field phase will begin nominally on 1 November 2010 and extend to approximately early April 2011.

  13. Local drainage analyses of the Paducah and Portsmouth Gaseous Diffusion Plants during an extreme storm

    SciTech Connect (OSTI)

    Johnson, R.O.; Wang, J.C.; Lee, D.W.

    1993-11-01T23:59:59.000Z

    Local drainage analyses have been performed for the Paducah and Portsmouth Gaseous Diffusion Plants during an extreme storm having an approximate 10,000-yr recurrence interval. This review discusses the methods utilized to accomplish the analyses in accordance with US Department of Energy (DOE) design and evaluation guidelines, and summarizes trends, results, generalizations, and uncertainties applicable to other DOE facilities. Results indicate that some culverts may be undersized, and that the storm sewer system cannot drain the influx of precipitation from the base of buildings. Roofs have not been designed to sustain ponding when the primary drainage system is clogged. Some underground tunnels, building entrances, and ground level air intakes may require waterproofing.

  14. The development and evaluation of a neutron window filter facility utilizing the TAMU NSC TRIGA reactor

    E-Print Network [OSTI]

    Harding, Patricia Colleen

    2012-06-07T23:59:59.000Z

    THE DEVELOPMENT AND EVALUATION OF A NEUTRON WINDOW FILTER FACILITY UTILIZING THE TAMU NSC TRIGA REACTOR A Thesis by PATRICIA COLLEEN HARDING Submitted to the Graduate College of Texas AAM University in partial fulfillment of the requirement... for the degree of MASTER OF SCIENCE December 1982 Major Subject: Nuclear Engineering THE DEVELOPMENT AND EVALUATION OF A NEUTRON WINDOW FILTER FACILITY UTILIZING THE TAMU NSC TRIGA REACTOR A Thesis by PATRICIA COLLEEN HARDING Approved as to style...

  15. Development of a design procedure for architectural laminated glass window units

    E-Print Network [OSTI]

    Dice, Jeffrey Aaron

    1992-01-01T23:59:59.000Z

    DEVELOPMENT OF A DESIGN PROCEDURE FOR ARCHITECTURAL LAMINATED GLASS WINDOW UNITS A Thesis by JEFFREY AARON DICE Submitted to the Office of Graduate Studies of Texas ARM University in partial fulfillment of the requirements for the degree... of MASTER OF SCIENCE December 1992 Major Subject: Civil Engineering DEVELOPMENT OF A DESIGN PROCEDURE FOR ARCHITECTURAL LAMINATED GLASS WINDOW UNITS A Thesis by JEFFREY AARON DICE Approved as to style and content by: . L n Beason (Chair o Committee...

  16. The performance and evaluation of the damaging downburst prediction and detection algorithm for bow echo storms

    E-Print Network [OSTI]

    Karl, Beth Ann

    2000-01-01T23:59:59.000Z

    THE PERFORMANCE AND EVALUATION OF THE DAMAGING DOWNBURST PREDICTION AND DETECTION ALGORITHM FOR BOW ECHO STORMS A Thesis by BETH ANN KARL Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment... to the Office of Graduate Studies of Texas ARM University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE May 2000 Major Subject: Atmospheric Sciences THE PERFORMANCE AND EVALUATION OF THE DAMAGING DOWNBURST PREDICTION...

  17. An investigation of dust storm generation in the Southern Great Plains

    E-Print Network [OSTI]

    Pollard, Marshall Conrad

    1977-01-01T23:59:59.000Z

    An investigation of dust sto'rms in the Southern Great Plains was conducted to determine correlations between dust and precipitation, Antecedent Precipitation Index (API), wind, time of occurrence, and dew-point depression. Re- lationships between blowing dust... Summary of favorable parameters and conditions for springtime generation of blowing dust in local areas of the Southern Great Plains 66 LIST OF FIGURES Figure Title Page Physiographic regions of the United States and their dominant landf orms (after...

  18. Effects of baroclinicity on storm divergence and stratiform rain in a precipitating subtropical region

    E-Print Network [OSTI]

    Hopper, Jr., Larry John

    2009-05-15T23:59:59.000Z

    the spectral transform of the Doppler radar ?purl? divergence measurements 7 and Fig. 3b shows the model-derived temperature perturbation fields that exist six hours after mesoscale latent heating sources have begun. These ?purl? measurements were... was Texas? wettest and Oklahoma?s fourth wettest summer on record. Similarly, March 2007 was Texas? wettest March on record. (http://lwf.ncdc.noaa.gov/oa/climate/research/2007/cmb-prod-us-2007.html) 15 2. BAROCLINICITY AND STORM TYPES...

  19. Impact of the 2008 Ice Storm on Moso Bamboo plantations in southeast China

    SciTech Connect (OSTI)

    Zhou, Dr. Benzhi [Chinese Academy of Forestry; Li, Zhengcai [Chinese Academy of Forestry; Cao, Yonghui [Chinese Academy of Forestry; An, Yanfei [Chinese Academy of Forestry; Deng, Dr. Zongfu [Chinese Academy of Forestry; Wang, Gang [Chinese Academy of Forestry; Gu, Lianhong [ORNL

    2011-01-01T23:59:59.000Z

    A massive ice and snow storm occurred in early 2008 in South China and caused extensive damage to forests. Thirty-six plots of moso bamboo (Phyllostachys pubescens) plantation were established following the ice storm in the central growth area of moso bamboo, Fenyi, Jiangxi province, China. The topographical condition and stand attributes, and the ice storm impact on moso bamboo plantations were investigated. We found that an average of 54.48% ( 17.58%) bamboo culms was damaged. The damage patterns included bending, snapping and uprooting, which accounted for 17.01% ( 7.28%), 22.37% ( 11.58%) and 15.11% ( 11.54%) of the total respectively. An average of 16.42 ( 7.09) tons per hectare dead dry biomass was produced, accounting for 37.73% ( 14.41%) of total aboveground biomass. A mean value of 8.21 ( 3.55) Mg C per hectare was shifted from living biomass to dead. Stand level analysis showed a significant increase in damage level and dead biomass production at north-oriented slopes, and with high stand density (between 3000 and 4500 culm/ha). High altitude caused a higher proportion of snapped culms but a lower proportion of uprooted. Analysis at individual culm level suggested that the susceptibility for a culm to break or uproot due to ice storm would rise as its diameter increased, while the susceptibility to bend would decline. The young (one year old) culm was more susceptible to snapping or bending while over-mature (>5 years old) culm was more susceptible to uprooting, implying it is a good managing practice to harvest mature culm timely.

  20. File:06COBConstructionStormWaterPermit.pdf | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic UtilitiesCABConstructionStormWaterProgram.pdf Jump to: navigation, search File File history