Sample records for interface mobile device

  1. Adaptive and Personalized Interfaces for Mobile Web With the rapid advance of mobile technologies and the widely use of handheld mobile devices,

    E-Print Network [OSTI]

    Hu, Wen-Chen

    the explosive growth of handheld mobile devices such as cell phones, palm pilots, and personal digital device and a user's preference. This paper proposes an innovative approach to adaptive and personalizedAdaptive and Personalized Interfaces for Mobile Web Abstract With the rapid advance of mobile

  2. A multimodal speech interface for dynamic creation and retrieval of geographical landmarks on a mobile device

    E-Print Network [OSTI]

    Dyar, Samuel S

    2010-01-01T23:59:59.000Z

    As mobile devices become more powerful, researchers look to develop innovative applications that use new and effective means of input. Furthermore, developers must exploit the device's many capabilities (GPS, camera, touch ...

  3. Sketch Recognition on Mobile Devices

    E-Print Network [OSTI]

    Lucchese, George 1987-

    2012-11-29T23:59:59.000Z

    Sketch recognition allows computers to understand and model hand drawn sketches and diagrams. Traditionally sketch recognition systems required a pen based PC interface, but powerful mobile devices such as tablets and smartphones can provide a new...

  4. Sketch Recognition on Mobile Devices 

    E-Print Network [OSTI]

    Lucchese, George 1987-

    2012-11-29T23:59:59.000Z

    Sketch recognition allows computers to understand and model hand drawn sketches and diagrams. Traditionally sketch recognition systems required a pen based PC interface, but powerful mobile devices such as tablets and smartphones can provide a new...

  5. Reducing 3G energy consumption on mobile devices

    E-Print Network [OSTI]

    Deng, Shuo

    2012-01-01T23:59:59.000Z

    The 3G wireless interface is a significant contributor to battery drain on mobile devices. This paper describes the design, implementation, and experimental evaluation of methods to reduce the energy consumption of the 3G ...

  6. Mobile Device Management Android Device Enrollment

    E-Print Network [OSTI]

    to manage your device. c. Enter your password. #12;d. Accept the Terms and Conditions e. You have completed. 2. Get Touchdown from Google Play a. Open up the Google Play Store. b. Search for Touchdown. c. Use the application. #12;3. Get Citrix Mobile Connect from Google Play a. Open up the Google Play Store. b. Search

  7. Mobility platform coupling device and method for coupling mobility platforms

    DOE Patents [OSTI]

    Shirey, David L. (Albuquerque, NM); Hayward, David R. (Albuquerque, NM); Buttz, James H. (Albuquerque, NM)

    2002-01-01T23:59:59.000Z

    A coupling device for connecting a first mobility platform to a second mobility platform in tandem. An example mobility platform is a robot. The coupling device has a loose link mode for normal steering conditions and a locking position, tight link mode for navigation across difficult terrain and across obstacles, for traversing chasms, and for navigating with a reduced footprint in tight steering conditions.

  8. The Simplicity Device: Your Personal Mobile Representative

    E-Print Network [OSTI]

    The Simplicity Device: Your Personal Mobile Representative Giovanni Bartolomeo1, Francesca Martire1 mobile phone that stores and handles personal information about the user. The Simplicity Device can be connected (e.g. via Bluetooth) to several other devices thus allowing personalization of services

  9. Sinch : searching intelligently on a mobile device

    E-Print Network [OSTI]

    Nayak, Rajeev (Rajeev R.)

    2010-01-01T23:59:59.000Z

    Sinch is an application that allows mobile device users to obtain answers to their questions without having to perform a web search in their mobile browser. Questions are answered by human beings using Mechanical Turk, an ...

  10. Dynamic Analysis of Mobile Device Applications

    SciTech Connect (OSTI)

    Corey Thuen

    2013-01-01T23:59:59.000Z

    The On-Device Dynamic Analysis of Mobile Applications (ODAMA) project was started in an effort to protect mobile devices used in Industrial Control Systems (ICS) from cyber attack. Because mobile devices hide as much of the “computer” as possible, the user’s ability to assess the software running on their system is limited. The research team chose Google’s Android platform for this initial research because it is open source and it would give us freedom in our approach, including the ability to modify the mobile device’s operating system itself. The research team concluded that a Privileged Application was the right approach, and the result was ODAMA. This project is an important piece of the work to secure the expanding use of mobile devices with our nation’s critical infrastructure.

  11. Batteries, mobile phones & small electrical devices

    E-Print Network [OSTI]

    , mobile phones and data collection equipment. Lithium Ion batteries are used in mobile phones, laptopsBatteries, mobile phones & small electrical devices IN-BUILDING RECYCLING STATIONS. A full list of acceptable items: Sealed batteries ­excludes vented NiCad and Lead acid batteries Cameras Laser printer

  12. A Tutorial on Automatic Speech Recognition for Wireless Mobile Devices

    E-Print Network [OSTI]

    Rose, Richard

    will consist of a survey of existing mobile ASR applications, architecures, and supporting technology technology including specialized transducers, specialized devices,and language resources for mobile, and supporting technology 1. ASR applications on handheld, mobile devices Portable Devices processing power

  13. Portable control device for networked mobile robots

    DOE Patents [OSTI]

    Feddema, John T. (Albuquerque, NM); Byrne, Raymond H. (Albuquerque, NM); Bryan, Jon R. (Edgewood, NM); Harrington, John J. (Albuquerque, NM); Gladwell, T. Scott (Albuquerque, NM)

    2002-01-01T23:59:59.000Z

    A handheld control device provides a way for controlling one or multiple mobile robotic vehicles by incorporating a handheld computer with a radio board. The device and software use a personal data organizer as the handheld computer with an additional microprocessor and communication device on a radio board for use in controlling one robot or multiple networked robots.

  14. Asbestos : operating system security for mobile devices

    E-Print Network [OSTI]

    Stevenson, Martijn

    2006-01-01T23:59:59.000Z

    This thesis presents the design and implementation of a port of the Asbestos operating system to the ARM processor. The port to the ARM allows Asbestos to run on mobile devices such as cell phones and personal digital ...

  15. Chemically sensitive interfaces on SAW devices

    SciTech Connect (OSTI)

    Ricco, A.J.; Martin, S.J. [Sandia National Labs., Albuquerque, NM (United States); Crooks, R.M.; Xu, Chuanjing [Texas A and M Univ., College Station, TX (United States); Allred, R.E. [Adherent Technologies, Inc., Albuquerque, NM (United States)

    1993-11-01T23:59:59.000Z

    Using surface acoustic wave (SAW) devices, three approaches to the effective use of chemically sensitive interfaces that are not highly chemically selective have been examined: (1) molecular identification from time-resolved permeation transients; (2) using multifrequency SAW devices to determine the frequency dependence of analyte/film interactions; (3) use of an array of SAW devices bearing diverse chemically sensitive interfaces to produce a distinct response pattern for each analyte. In addition to their well-known sensitivity to mass changes (0.0035 monolayer of N{sub 2} can be measured), SAW devices respond to the mechanical and electronic properties of thin films, enhancing response information content but making a thorough understanding of the perturbation critical. Simultaneous measurement of changes in frequency and attenuation, which can provide the information necessary to determine the type of perturbation, are used as part of the above discrimination schemes.

  16. EvaluatingMobilePhonesasEnergyConsumptionFeedbackDevices MarkusWeiss*

    E-Print Network [OSTI]

    EvaluatingMobilePhonesasEnergyConsumptionFeedbackDevices MarkusWeiss* ,ClaireManagement,ETHZurich Abstract. With smart electricity meters being widely deployed, data on residential energy usage of mobile phones as an interface to provide feedback on overall and de- vice-related energy consumption

  17. UIA: A Global Connectivity Architecture for Mobile Personal Devices

    E-Print Network [OSTI]

    Ford, Bryan

    UIA: A Global Connectivity Architecture for Mobile Personal Devices by Bryan Alexander Ford B Architecture for Mobile Personal Devices by Bryan Alexander Ford Submitted to the Department of Electrical multiple personal devices, many of them mobile, and need to share information securely among them using

  18. Nitride semiconductor Surface and interface characterization and device design

    E-Print Network [OSTI]

    Zhang, Hongtao

    2006-01-01T23:59:59.000Z

    Lett. 80 , D. Schroder, Semiconductor Material and Devicein III-V Nitride Semiconductors: Applications and Devices ,SAN DIEGO Nitride Semiconductor Surface and Interface

  19. Ada : context-sensitive context-sensing on mobile devices

    E-Print Network [OSTI]

    Chen, Yu-Han, S.M. Massachusetts Institute of Technology

    2013-01-01T23:59:59.000Z

    This thesis describes the design, implementation, and evaluation of Ada, a context-sensing service for mobile devices. Ada explores new points in the accuracy-energy-responsiveness design space for mobile context sensing. ...

  20. English language learners' reading self-efficacy and achievement using 1:1 mobile learning devices

    E-Print Network [OSTI]

    Walters, Jennifer L.

    2012-01-01T23:59:59.000Z

    the singular user of the personal device, or it can be co-mobile learning devices are personal digital assistants (of mobile devices including tablet personal computers,

  1. Hybrid fuel cell for mobile devices : an integrated approach

    E-Print Network [OSTI]

    Sohn, Munhee, 1981-

    2006-01-01T23:59:59.000Z

    As mobile devices advance to 3G and beyond, there will be a pressing need for increased power to drive these devices, which the current batteries cannot provide. The direct methanol fuel cell has been identified as a ...

  2. Subtle, intimate interfaces for mobile human computer interaction

    E-Print Network [OSTI]

    Costanza, Enrico

    2006-01-01T23:59:59.000Z

    The mobile phone is always carried with the user and is always active: it is a very personal device. It fosters and satisfies a need to be constantly connected to one's significant other, friends or business partners. At ...

  3. SECURITY BASICS FOR MOBILE DEVICES UNH IT SECURITY, DECEMBER 2011

    E-Print Network [OSTI]

    SECURITY BASICS FOR MOBILE DEVICES UNH IT SECURITY, DECEMBER 2011 Choose brands and models of mobile devices that have the options referenced below. Use all available security options that your or sensitive university information in un-approved off-campus services, such as public cloud based services

  4. Mobile and Physical User Interfaces for NFC-based Mobile Interaction with Multiple Tags

    E-Print Network [OSTI]

    Communication (NFC) is an emerging technology for mobile interaction with everyday objects and associated lives, its technologies affect the way we access and use information. Mobile devices can be used. An emerging technology for physical mobile interaction [14] is Near Field Communication (NFC) [20], a radio

  5. Performance of data dissemination among mobile devices Maria Papadopouli

    E-Print Network [OSTI]

    Papadopouli, Maria

    Performance of data dissemination among mobile devices Maria Papadopouli # Henning Schulzrinne and an implementation enabling the exchange of data among peers that are not necessarily connected to the Internet. Peers can be either mobile or stationary. We present a general framework of mobile data access

  6. Performance of data dissemination among mobile devices Maria Papadopouli

    E-Print Network [OSTI]

    Papadopouli, Maria

    Performance of data dissemination among mobile devices Maria Papadopouli Henning Schulzrinne and an implementation enabling the exchange of data among peers that are not necessarily connected to the Internet. Peers can be either mobile or stationary. We present a general framework of mobile data access

  7. Managing Processes on Mobile Devices: The MARPLE Approach

    E-Print Network [OSTI]

    Ulm, Universität

    Managing Processes on Mobile Devices: The MARPLE Approach R¨udiger Pryss, Julian Tiedeken. In the MARPLE project we target at a tight integration of process management technol- ogy with mobile computing Introduction Mobile assistance in daily life as empowered by information and communication technology is a much

  8. Hindered mobility of a particle near a soft interface

    E-Print Network [OSTI]

    Thomas Bickel

    2006-10-27T23:59:59.000Z

    The translational motion of a solid sphere near a deformable fluid interface is studied in the low Reynolds number regime. In this problem, the fluid flow driven by the sphere is dynamically coupled the instantaneous conformation of the interface. Using a two-dimensional Fourier transform technique, we are able to account for the multiple backflows scattered from the interface. The mobility tensor is then obtained from the matrix elements of the relevant Green function. This analysis allows us to express the explicit position and frequency dependence of the mobility. We recover in the steady limit the result for a sphere near a perfectly flat interface. At intermediate time scales, the mobility exhibits an imaginary part, which is a signature of the elastic response of the interface. In the short time limit, we find the intriguing feature that the perpendicular mobility may, under some circumstances, become lower than the bulk value. All those results can be explained from the definition of the relaxation time of the soft interface.

  9. Video Game Device Haptic Interface for Robotic Arc Welding

    SciTech Connect (OSTI)

    Corrie I. Nichol; Milos Manic

    2009-05-01T23:59:59.000Z

    Recent advances in technology for video games have made a broad array of haptic feedback devices available at low cost. This paper presents a bi-manual haptic system to enable an operator to weld remotely using the a commercially available haptic feedback video game device for the user interface. The system showed good performance in initial tests, demonstrating the utility of low cost input devices for remote haptic operations.

  10. Mobile Notes: Mobile Devices in Creative Discussions Lars Bollen, Guillermo Juarez, H.U Hoppe

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    owns the personal device ­ the institution or the student?) and homogeneity (will one device be used setting. This setting includes personal mobile devices (PDAs) as well as a publicly visible interactive focus with smaller personal devices. In our own previous work, we have explored extending collaborative

  11. Characterizing and Leveraging Processor Variability in Mobile Devices for Energy Efficiency

    E-Print Network [OSTI]

    Chandrashekhar, Roshni

    characterization of variability in power consumption across multiple mobile devices and mechanisms to harness this variation for improving device battery

  12. Energy Management in Mobile Devices with the Cinder Operating System

    E-Print Network [OSTI]

    Roy, Arjun

    We argue that controlling energy allocation is an increasingly useful and important feature for operating systems, especially on mobile devices. We present two new low-level abstractions in the Cinder operating system, ...

  13. Energy management in mobile devices with the cinder operating system

    E-Print Network [OSTI]

    Roy, Arjun

    We argue that controlling energy allocation is an increasingly useful and important feature for operating systems, especially on mobile devices. We present two new low-level abstractions in the Cinder operating system, ...

  14. 3D Printed Microscope for Mobile Devices that Cost Pennies

    SciTech Connect (OSTI)

    Erikson, Rebecca; Baird, Cheryl; Hutchinson, Janine

    2014-09-15T23:59:59.000Z

    Scientists at PNNL have designed a 3D-printable microscope for mobile devices using pennies worth of plastic and glass materials. The microscope has a wide range of uses, from education to in-the-field science.

  15. Power Save Adaptation Algorithm for Multimedia Streaming to Mobile Devices

    E-Print Network [OSTI]

    Power Save Adaptation Algorithm for Multimedia Streaming to Mobile Devices Janet Adams Performance. This paper proposes a power save adaptation algorithm for mobile multimedia streaming that aims to increase stages: data reception, decoding and playing and power saving solutions for each of these stages

  16. Energy Analysis of Multimedia Watermarking on Mobile Handheld Devices

    E-Print Network [OSTI]

    Gupta, Rajesh

    form factor. Furthermore, these devices have a limited energy budget (battery life is limited). Perform watermarks) and image resolution on energy and execution time. We believe that such characterization is critical for addressing energy efficient watermarking for battery-constrained mobile handheld devices

  17. Energy Management in Mobile Devices with the Cinder Operating System

    E-Print Network [OSTI]

    Levis, Philip

    Energy Management in Mobile Devices with the Cinder Operating System Arjun Roy, Stephen M. Rumble and applications to con- trol and manage limited device resources such as energy. Cinder introduces two new hoarding unused energy. Cinder additionally institutes a global half-life to prevent malicious applications

  18. T-547: Microsoft Windows Human Interface Device (HID) Vulnerability

    Broader source: Energy.gov [DOE]

    Microsoft Windows does not properly warn the user before enabling additional Human Interface Device (HID) functionality over USB, which allows user-assisted attackers to execute arbitrary programs via crafted USB data, as demonstrated by keyboard and mouse data sent by malware on a Smartphone that the user connected to the computer.

  19. SLS complementary logic devices with increase carrier mobility

    DOE Patents [OSTI]

    Chaffin, R.J.; Osbourn, G.C.; Zipperian, T.E.

    1991-07-09T23:59:59.000Z

    In an electronic device comprising a semiconductor material and having at least one performance characteristic which is limited by the mobility of holes in the semiconductor material, said mobility being limited because of a valence band degeneracy among high-mobility and low-mobility energy levels accessible to said holes at the energy-momentum space maximum, an improvement is provided wherein the semiconductor material is a strained layer superlattice (SLS) whose layer compositions and layer thicknesses are selected so that the strain on the layers predominantly containing said at least one carrier type splits said degeneracy and modifies said energy levels around said energy-momentum space maximum in a manner whereby said limitation on the mobility of said holes is alleviated. 5 figures.

  20. A SIP-based OSGi Device Communication Service for Mobile Personal Area Networks

    E-Print Network [OSTI]

    Kolberg, Mario

    A SIP-based OSGi Device Communication Service for Mobile Personal Area Networks Alan Brown, Mario are offered a variety of applications for their devices. Such devices include mobile phones, personal digital such as Bluetooth, users form their own mobile Personal Area Networks (PAN) to inter- network these devices

  1. MYOWNLIFE: INCREMENTAL SUMMARIZATION OF A PERSONAL IMAGE COLLECTION ON MOBILE DEVICES

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    MYOWNLIFE: INCREMENTAL SUMMARIZATION OF A PERSONAL IMAGE COLLECTION ON MOBILE DEVICES Antoine the browsing task on a mobile device, a pertinent device to share/browse personal images due to its continuous image collection, to provide a structure adapted to inter- face constraints on mobile devices

  2. Online Prediction of Battery Lifetime for Embedded and Mobile Devices

    E-Print Network [OSTI]

    Krintz, Chandra

    conditions (e.g. ambient temperature, battery recharge count, etc.), and ­ portable so that a varietyOnline Prediction of Battery Lifetime for Embedded and Mobile Devices Ye Wen, Rich Wolski,rich,ckrintz}@cs.ucsb.edu Abstract. This paper presents a novel, history-based, statistical tech- nique for online battery lifetime

  3. Nightmares with Mobile Devices Are Just Around the Corner!

    SciTech Connect (OSTI)

    Kurt Derr

    2007-03-01T23:59:59.000Z

    Mobile Devices (MDs) such as Personal Digital Assistants (PDAs), smart phones, handheld personal computers, and Tablet PCs, are proliferating in the marketplace. Cheap and ubiquitous mobile computing devices represent computing’s fifth wave [1], bringing about new opportunities in the marketplace. As MDs become more powerful and commonplace with ubiquitous connectivity, the line that currently divides these handheld devices from typical network computers will become very unclear. Mobile devices have become integrated into the business processes of both government and commercial institutions. MDs are small, portable, and able to store large amounts of information. The breadth of communication options (infrared, wireless, docking station) for MDs introduces many security risks. Some of the problems associated with MDs are: easy to loose, misplace, or have stolen, potential loss/comprise of company data (user ids, passwords, contacts, sensitive documentation, credit card numbers), increases the opportunity for a backdoor into an enterprise’s network, lack of authentication and limited logging capability. The use of these devices poses a risk to the security of an organization.

  4. R. C. Rose and S. Parthasarathy, ICSLP02 ASR for Wireless Mobile Devices Tutorial on ASR for Wireless

    E-Print Network [OSTI]

    Rose, Richard

    of Applications, Architectures, and Technology · Introduction ­ Mobile Applications, Devices, and Architectures · Survey ­ Mobile Applications and Devices ­ Communications Channels ­ Supporting Technology - Microphones Devices Part 1 - Survey of Applications, Architectures, and Technology · Introduction ­ Mobile

  5. Organic thin film devices with stabilized threshold voltage and mobility, and method for preparing the devices

    DOE Patents [OSTI]

    Nastasi, Michael Anthony; Wang, Yongqiang; Fraboni, Beatrice; Cosseddu, Piero; Bonfiglio, Annalisa

    2013-06-11T23:59:59.000Z

    Organic thin film devices that included an organic thin film subjected to a selected dose of a selected energy of ions exhibited a stabilized mobility (.mu.) and threshold voltage (VT), a decrease in contact resistance R.sub.C, and an extended operational lifetime that did not degrade after 2000 hours of operation in the air.

  6. “Cute” displays: Developing an Emotional Bond with Your Mobile Interface

    E-Print Network [OSTI]

    Rousi, Rebekah

    2009-01-01T23:59:59.000Z

    affectionate perception of mobile technology increases userof the icon to mobile communication technology. This sectiontechnology invented, it might not be inaccurate to say that users can and do treat their mobile

  7. Abstract--Recent developments on mobile devices and wireless technologies enable new technical capabilities for the

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Abstract-- Recent developments on mobile devices and wireless technologies enable new technical technologies and the widespread use of mobile devices. In the professional environment, training employees the first time in 1994[1]. Here, location, identity, time, environment, and mobile technology have been

  8. On the Scalability of Data Synchronization Protocols for PDAs and Mobile Devices

    E-Print Network [OSTI]

    Goldberg, Bennett

    Boston University Abstract Personal Digital Assistants (PDAs) and other mobile computing devices relyOn the Scalability of Data Synchronization Protocols for PDAs and Mobile Devices S. Agarwal D, tetherless networks. Keywords: Personal Digital Assistants, mobile networks, data synchronization A version

  9. “Cute” displays: Developing an Emotional Bond with Your Mobile Interface

    E-Print Network [OSTI]

    Rousi, Rebekah

    2009-01-01T23:59:59.000Z

    Overall, in such a personal device it may seem fair toto develop a personal communication device which is not onlyto compact personal organising devices (personal digital

  10. Semi-Supervised Learning in Inferring Mobile Device Locations Rong Duan , Olivia Hong, Guangqin Ma

    E-Print Network [OSTI]

    Greenberg, Albert

    With the development of mobility technology, location information has become collectible by various positioning, and ecology, etc. With the development of mobile technology, the capability of locating mobile devices and the other is mobile network position technology. Satellite position technology, commonly known as Global

  11. MULTISCALE DATABASES TO SUPPORT VISUALISATION ON MOBILE DEVICES M. Hampe a,

    E-Print Network [OSTI]

    Harrie, Lars

    devices like PDA's (Personal Digital Assistants) or Smartphones. With the increasing numberMULTISCALE DATABASES TO SUPPORT VISUALISATION ON MOBILE DEVICES M. Hampe a, *, M. Sester a , L display of mobile devices multiscale maps are created. The scale will decrease continuously starting

  12. Influence of interface mobility on the evolution of Austenite-Martensite grain assemblies during annealing

    SciTech Connect (OSTI)

    Clarke, Amy J [Los Alamos National Laboratory; Santofimia, Maria J [DELFT UNIV OF TECH; Speer, John G [COLORADO SCHOOL OF MINES; Zhao, L [DELFT UNIV OF TECH; Sietsma, Jilt [DELFT UNIV OF TECH

    2009-01-01T23:59:59.000Z

    The quenching and partitioning (Q&P) process is a new heat treatment for the creation of advanced high-strength steels. This treatment consists of an initial partial or full austenitization, followed by a quench to form a controlled amount of martensite and an annealing step to partition carbon atoms from the martensite to the austenite. In this work, the microstructural evolution during annealing of martensite-austenite grain assemblies has been analyzed by means of a modeling approach that considers the influence of martensite-austenite interface migration on the kinetics of carbon partitioning. Carbide precipitation is precluded in the model, and three different assumptions about interface mobility are considered, ranging from a completely immobile interface to the relatively high mobility of an incoherent ferrite-austenite interface. Simulations indicate that different interface mobilities lead to profound differences in the evolution of microstructure that is predicted during annealing.

  13. An abstract-device interface for implementing portable parallel-I/O interfaces

    SciTech Connect (OSTI)

    Thakur, R.; Gropp, W.; Lusk, E. [Argonne National Lab., IL (United States). Mathematics and Computer Science Div.

    1996-12-31T23:59:59.000Z

    Portable parallel programming has been hampered by the lack of a single, standard, portable application-programmer`s interface (API) for parallel I/O. Instead, the programmer must choose from several different APIs, many of which are not portable. To alleviate this problem, the authors have developed an abstract-device interface for parallel I/O, called ADIO. ADIO is not intended as a new API; rather, it is a strategy for implementing other APIs in a simple, portable, and efficient manner. ADIO facilitates the implementation of any existing or new API on any existing or new file system. ADIO thus enables users to experiment with different APIs, a feature that, they think, would help in the definition of a standard API. It also makes existing applications portable across a wide range of platforms. In this paper, they introduce the concept of ADIO. They describe the design of ADIO and its use in implementing APIs. They have currently implemented subsets of the Intel PFS, IBM PIOFS, and MPI-IO APIs on both the PFS and PIOFS file systems. As a result, they are able to run IBM PIOFS applications on the Intel Paragon, Intel PFS applications on the IBM SP, and MPI-IO applications on both systems. They report performance results obtained from two test programs and one real production application on the SP and Paragon. These results indicate that the performance overhead of using ADIO as an implementation strategy is negligible.

  14. Perceptual and Context Aware Interfaces on Mobile Devices

    E-Print Network [OSTI]

    Wang, Jingtao

    2010-01-01T23:59:59.000Z

    between global and local views. Through a compact decorationbetween global and local views. Through a compact decoration

  15. University of Newcastle upon Tyne Mobile Devices in Crossmodal Interfaces

    E-Print Network [OSTI]

    Newcastle upon Tyne, University of

    in the construction of CROSSFLOW, a crossmodal ambient display prototype for indoor navigation, and demonstrate a significant increase in the performance of users navigating with CROSSFLOW in contrast to their navigation the exploitation of aspects of crossmodal cognition. We utilize this framework in the construction of CROSSFLOW

  16. GMSME: An Architecture for Heterogeneous Collaboration with Mobile Devices Sangyoon Oh1, 2

    E-Print Network [OSTI]

    of network-ready personal devices in collaborative systems is becoming apparent. The participants-ready mobile devices like Personal Digital Assistants (PDAs) and Smart phones as client devices has emerged as a major focus in collaborative systems. The combination of personal devices with conventional PCs

  17. Guidelines for MOSFET Device Optimization accounting for L-dependent Mobility Degradation

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Guidelines for MOSFET Device Optimization accounting for L-dependent Mobility Degradation G. Bidal1 to monitor L-dependent mobility degradation based on empirical modeling of experimental results. This method allows benchmarking the impact on mobility degradation of different technological modules, thus giving

  18. CloneCloud: Boosting Mobile Device Applications Through Cloud Clone Execution

    E-Print Network [OSTI]

    Chun, Byung-Gon; Maniatis, Petros; Naik, Mayur

    2010-01-01T23:59:59.000Z

    Mobile applications are becoming increasingly ubiquitous and provide ever richer functionality on mobile devices. At the same time, such devices often enjoy strong connectivity with more powerful machines ranging from laptops and desktops to commercial clouds. This paper presents the design and implementation of CloneCloud, a system that automatically transforms mobile applications to benefit from the cloud. The system is a flexible application partitioner and execution runtime that enables unmodified mobile applications running in an application-level virtual machine to seamlessly off-load part of their execution from mobile devices onto device clones operating in a computational cloud. CloneCloud uses a combination of static analysis and dynamic profiling to optimally and automatically partition an application so that it migrates, executes in the cloud, and re-integrates computation in a fine-grained manner that makes efficient use of resources. Our evaluation shows that CloneCloud can achieve up to 21.2x s...

  19. Morpes: A Model for Personalized Rendering of Web Content on Mobile Devices

    E-Print Network [OSTI]

    Kuppusamy, K S; 10.5121/ijfcst.2012.2204

    2012-01-01T23:59:59.000Z

    With the tremendous growth in the information communication sector, the mobile phones have become the prime information communication devices. The convergence of traditional telephony with the modern web enabled communication in the mobile devices has made the communication much effective and simpler. As mobile phones are becoming the crucial source of accessing the contents of the World Wide Web which was originally designed for personal computers, has opened up a new challenge of accommodating the web contents in to the smaller mobile devices. This paper proposes an approach towards building a model for rendering the web pages in mobile devices. The proposed model is based on a multi-dimensional web page segment evaluation model. The incorporation of personalization in the proposed model makes the rendering user-centric. The proposed model is validated with a prototype implementation.

  20. DEAR: A DEVICE AND ENERGY AWARE ROUTING PROTOCOL FOR MOBILE AD HOC NETWORKS

    E-Print Network [OSTI]

    Hou, Y. Thomas

    1 DEAR: A DEVICE AND ENERGY AWARE ROUTING PROTOCOL FOR MOBILE AD HOC NETWORKS Arun Avudainayagam of functioning and available resources. In this paper, we propose a Device and Energy Aware Routing protocol-powered nodes and battery-powered nodes. We embed both the energy and the device awareness into the routing

  1. Real-time Bus Information on Mobile Devices Stuart D. Maclean, Daniel J. Dailey

    E-Print Network [OSTI]

    on a variety of personal electronic devices. Within the wireless communications industry, the WAP Forum[2] has1 Real-time Bus Information on Mobile Devices Stuart D. Maclean, Daniel J. Dailey Abstract-- We restrictions of such devices, e.g., screen size and paucity of keyboard options, influences the user in

  2. Interface Surprises May Motivate Novel Oxide Electronic Devices

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    by oxygen vacancies highlights the important role of ionic phenomena in oxide electronics and opens a pathway for new device concepts." For example, someday engineers...

  3. Creation of a gradient polymer-fullerene interface in photovoltaic devices by thermally controlled interdiffusion

    E-Print Network [OSTI]

    Heflin, Randy

    by providing im- proved donor/acceptor proximity throughout the device using interpenetrating polymer networks5Creation of a gradient polymer-fullerene interface in photovoltaic devices by thermally controlled 24062-1704 Received 29 July 2002; accepted 27 September 2002 Efficient polymer-fullerene photovoltaic

  4. Device Transparency: a New Model for Mobile Storage

    E-Print Network [OSTI]

    Strauss, Jacob A.

    This paper proposes a new storage model, device transparency, in which users view and manage their entire data collection from any of their devices, even from disconnected storage-limited devices holding only a subset of ...

  5. Supporting museum co-visits using mobile devices Yann Laurillau, Fabio Patern

    E-Print Network [OSTI]

    Supporting museum co-visits using mobile devices Yann Laurillau, Fabio Paternò Consiglio Nazionale learning in museum visits and show an example application based on mobile palmtop systems. To this end, we, such as museums. The museum visit is usually an individual experience. Furthermore, electronic guides

  6. LLAMA: An Adaptive Strategy for Utilizing Excess Energy to Perform Background Tasks on Mobile Devices

    E-Print Network [OSTI]

    Rollins, Sami

    LLAMA: An Adaptive Strategy for Utilizing Excess Energy to Perform Background Tasks on Mobile's experience but require no interactiv- ity. In an effort to conserve energy, background tasks are typically that mobile devices often begin to recharge with 30% or more of their energy remaining. The goal of this work

  7. Workload-Based Configuration of MEMS-Based Storage Devices for Mobile Systems

    E-Print Network [OSTI]

    Miller, Ethan L.

    Data layout, MEMS, Probe-Based Storage 1. INTRODUCTION Users of battery-powered mobile systems requireWorkload-Based Configuration of MEMS-Based Storage Devices for Mobile Systems Mohammed G. Khatib.h.hartel@utwente.nl ABSTRACT Because of its small form factor, high capacity, and expected low cost, MEMS-based storage

  8. Metal oxide/organic interface investigations for photovoltaic devices

    E-Print Network [OSTI]

    Pachoumi, Olympia

    2014-10-07T23:59:59.000Z

    organic photovoltaics is investigated. We show that using these ternary oxides can lead to superior devices by: prevent- ing a dipole forming between the oxide and the active organic layer in a model ZnMO / P3HT:PCBM OPV as well as lead to improved surface...

  9. A human factors evaluation of computer keyboard interface devices for use by quadriplegics 

    E-Print Network [OSTI]

    Fleischer, Lawrence Blair

    1989-01-01T23:59:59.000Z

    for the degree of MASTER OF SCIENCE May 1989 Major Subject: Industrial Engineering A HUMAN FACTORS EVALUATION OF COMPUTER KEYBOARD INTERFACE DEVICES FOR USE BY QUADRIPLEGICS A Thesis by LAWRENCE BLAIR FLEISCHER Approved as to style and content by... such as Morse Code makes this system very usable. Freewheel, another type of head movement device, is produce by Pointer Systems and available for use on IBM and compatible personal computers. Infrared light is transmitted from a box placed on top...

  10. GE MEMS for LTE Advanced Mobile Devices | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    can be scaled down and miniaturized. "Our cross-disciplinary expertise in materials, device design, fabrication, packaging, electronics and system integration has allowed us...

  11. Abstract--Video streaming on mobile devices such as PDA's, laptop PCs, pocket PCs and cell phones is becoming increasingly

    E-Print Network [OSTI]

    Bhandarkar, Suchendra "Suchi" M.

    personalization strategies are used to provide these resource- constrained mobile devices with personalized video to resource constrained client-devices. Index Terms-- Video personalization; Caching; Cache replacement. As handheld mobile computing and communication devices such as personal digital assistants (PDAs), pocket

  12. PoCoMo: Projected Collaboration using Mobile Devices

    E-Print Network [OSTI]

    Shilkrot, Roy

    2011-01-01T23:59:59.000Z

    As personal projection devices become more common they will be able to support a range of exciting and unexplored social applications. We present a novel system and method that enables playful social interactions between ...

  13. Mobile computing device configured to compute irradiance, glint, and glare of the sun

    DOE Patents [OSTI]

    Gupta, Vipin P; Ho, Clifford K; Khalsa, Siri Sahib

    2014-03-11T23:59:59.000Z

    Described herein are technologies pertaining to computing the solar irradiance distribution on a surface of a receiver in a concentrating solar power system or glint/glare emitted from a reflective entity. A mobile computing device includes at least one camera that captures images of the Sun and the entity of interest, wherein the images have pluralities of pixels having respective pluralities of intensity values. Based upon the intensity values of the pixels in the respective images, the solar irradiance distribution on the surface of the entity or glint/glare corresponding to the entity is computed by the mobile computing device.

  14. AUTHENTICATED SENSOR INTERFACE DEVICE FOR JOINT USE SAFEGUARDS APPLICATIONS - CONCEPTS AND CHALLENGES

    SciTech Connect (OSTI)

    Poland, R.; Drayer, R.; Wilson, J.

    2013-08-12T23:59:59.000Z

    This paper will discuss the key features of the Authenticated Sensor Interface Device that collectively provide the ability to share data among a number of parties while ensuring the authentication of data and protecting both the operator’s and the IAEA’s interests. The paper will also discuss the development of the prototype, the initial testing with an accountancy scale, and future plans and challenges to implementation into the joint use and remote monitoring applications. As nuclear fuel cycle technology becomes more prevalent throughout the world and the capacity of plants increases, limited resources of the IAEA are being stretched near a breaking point. A strategy is to increase efficiency in safeguards monitoring using “joint use” equipment that will provide the facility operator process data while also providing the IAEA key safeguards data. The data, however, must be authenticated and validated to ensure the data have not been tampered with. The Authenticated Sensor Interface Device provides the capability to share data and can be a valuable component in the IAEA’s ability to collect accountancy data from scales in Uranium conversion and enrichment plants, as well as nuclear fuel fabrication plants. Likewise, the Authenticated Sensor Interface Device can be configured to accept a diverse array of input signals, ranging from analog voltage, to current, to digital interfaces and more. These modular capabilities provide the ability to collect authenticated, joint-use, data streams from various process monitoring sensors.

  15. Strategic analysis of mobile viral marketing through a holistic study in technological evolution of mobile devices

    E-Print Network [OSTI]

    Surya, Yulia

    2009-01-01T23:59:59.000Z

    Rapid advancement in Electronic Communication gives rise to the popularity of Viral Marketing. Mobile Communication, in particular, offers greater potential in the utilization of this Word-of-Mouth phenomenon as a Marketing ...

  16. RFID Guardian: A Battery-Powered Mobile Device for RFID Privacy Management

    E-Print Network [OSTI]

    Tanenbaum, Andrew S.

    RFID Guardian: A Battery-Powered Mobile Device for RFID Privacy Management Melanie R. Rieback, The Netherlands {melanie,crispo,ast}@cs.vu.nl Abstract. RFID tags are tiny, inexpensive, inductively powered com automatically tallies up her items and charges the total cost to her credit card. Nancy is not sure exactly how

  17. Flexible Point-Based Rendering on Mobile Devices Florent Duguet and George Drettakis

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Flexible Point-Based Rendering on Mobile Devices Florent Duguet and George Drettakis REVES/INRIA Sophia-Antipolis, France, http://www-sop.inria.fr/reves Abstract Point-based rendering is a compact and efficient means of displaying complex geometry. Our goal is to enable flexible point-based rendering

  18. To Cloud or Not to Cloud: A Mobile Device Perspective on Energy Consumption of Applications

    E-Print Network [OSTI]

    Namboodiri, Vinod

    To Cloud or Not to Cloud: A Mobile Device Perspective on Energy Consumption of Applications Vinod important criteria might be the energy consumed by the applications they run. The goal of this work is to characterize under what scenarios cloud-based applications would be relatively more energy-efficient for users

  19. Mobile Application and Device Power Usage Measurements1,2 Rahul Murmuria, Jeffrey Medsger, Angelos Stavrou

    E-Print Network [OSTI]

    Stavrou, Angelos

    by the operating system's power-management module. We present the models capability to further calculate the powerMobile Application and Device Power Usage Measurements1,2 Rahul Murmuria, Jeffrey Medsger, Angelos Gaithersburg, MD 20899 Email:jeff.voas@nist.gov Abstract--Reducing power consumption has become a cru- cial

  20. Pervasive and Energy-Efficient Positioning and Trajectory Tracking for Mobile Devices

    E-Print Network [OSTI]

    Morik, Katharina

    Pervasive and Energy-Efficient Positioning and Trajectory Tracking for Mobile Devices (Henrik. To be useful, such tracking has to be energy-efficient to avoid having a major impact on the battery life-Temporal Databases Algorithm Engineering Time-, Space- and Energy-efficient Algorithms for Large Data Sets

  1. UbiBot : a system for experimenting with mobile devices on a wireless network

    E-Print Network [OSTI]

    Vedar, Erwin Abad

    2011-01-01T23:59:59.000Z

    conference on mobile technology, applications, and systemshuman interaction in mobile technology (Mobility ‘07), pages

  2. 1120 IEEE TRANSACTIONS ON ELECTRON DEVICES, VOL. 53, NO. 5, MAY 2006 Theory of Interface-Trap-Induced NBTI Degradation

    E-Print Network [OSTI]

    Alam, Muhammad A.

    mechanisms that generate traps at the Si-channel/gate-oxide interface of MOSFETs during transistor operation. The semiconductor/oxide interface is a rough surface where the highly ordered crystalline channel and the amor lead to poor device performance; therefore, the transistors are annealed in hydrogen ambient during

  3. Investigation of the GaN-on-GaAs interface for vertical power device applications

    SciTech Connect (OSTI)

    Möreke, Janina, E-mail: janina.moereke@bristol.ac.uk; Uren, Michael J.; Kuball, Martin [H.H. Wills Physics Laboratory, Tyndall Avenue, Bristol BS8 1TL (United Kingdom); Novikov, Sergei V.; Foxon, C. Thomas [Department of Physics and Astronomy, University of Nottingham, Nottingham NG7 2RD (United Kingdom); Hosseini Vajargah, Shahrzad; Wallis, David J.; Humphreys, Colin J. [Department of Materials Science and Metallurgy, University of Cambridge, 27 Charles Babbage Road, Cambridge CB3 0FS (United Kingdom); Haigh, Sarah J. [Super STEM Laboratory, STFC Daresbury Campus, Keckwick Lane, Daresbury WA4 4AD (United Kingdom); School of Materials, University of Manchester, Manchester M13 9PL (United Kingdom); Al-Khalidi, Abdullah; Wasige, Edward; Thayne, Iain [School of Engineering, University of Glasgow, Rankine Bldg, Oakfield Avenue, Glasgow G12 8LT (United Kingdom)

    2014-07-07T23:59:59.000Z

    GaN layers were grown onto (111) GaAs by molecular beam epitaxy. Minimal band offset between the conduction bands for GaN and GaAs materials has been suggested in the literature raising the possibility of using GaN-on-GaAs for vertical power device applications. I-V and C-V measurements of the GaN/GaAs heterostructures however yielded a rectifying junction, even when both sides of the junction were heavily doped with an n-type dopant. Transmission electron microscopy analysis further confirmed the challenge in creating a GaN/GaAs Ohmic interface by showing a large density of dislocations in the GaN layer and suggesting roughening of the GaN/GaAs interface due to etching of the GaAs by the nitrogen plasma, diffusion of nitrogen or melting of Ga into the GaAs substrate.

  4. Review: Mobile Interface Theory: Embodied Space and Locative Media by Jason Farman

    E-Print Network [OSTI]

    Crooks, Roderic

    2013-01-01T23:59:59.000Z

    consequences of mobile technology, one that contributesand mediation of mobile technologies. For the author, thesehappen together in uses of mobile technology. In successive

  5. Mobile biometric device (MBD) technology : summary of selected first responder experiences in pilot projects.

    SciTech Connect (OSTI)

    Aldridge, Chris D.

    2013-06-01T23:59:59.000Z

    Mobile biometric devices (MBDs) capable of both enrolling individuals in databases and performing identification checks of subjects in the field are seen as an important capability for military, law enforcement, and homeland security operations. The technology is advancing rapidly. The Department of Homeland Security Science and Technology Directorate through an Interagency Agreement with Sandia sponsored a series of pilot projects to obtain information for the first responder law enforcement community on further identification of requirements for mobile biometric device technology. Working with 62 different jurisdictions, including components of the Department of Homeland Security, Sandia delivered a series of reports on user operation of state-of-the-art mobile biometric devices. These reports included feedback information on MBD usage in both operational and exercise scenarios. The findings and conclusions of the project address both the limitations and possibilities of MBD technology to improve operations. Evidence of these possibilities can be found in the adoption of this technology by many agencies today and the cooperation of several law enforcement agencies in both participating in the pilot efforts and sharing of information about their own experiences in efforts undertaken separately.

  6. An Architecture for Multi-Sensor Fusion in Mobile Environments Datong Chen, Albrecht Schmidt, Hans-Werner Gellersen

    E-Print Network [OSTI]

    Chen, Datong

    for multi-sensor fusion, applied for environment awareness of personal mobile devices. The working environment of personal mobile devices changes dynamically depending on their user's activities. Equipped on improving the function and interface of these personal mobile devices through awareness of the user

  7. Update on mobile applications in dermatology

    E-Print Network [OSTI]

    Patel, Shivani; Eluri, Madhu; Boyers, Lindsay N; Karimkhani, Chante; Dellavalle, Robert

    2015-01-01T23:59:59.000Z

    mobile application devices surpassed personal computers foruse of mobile devices surpasses that of personal computers,

  8. Project Title Review mobile device support strategies. This project scope has been broadened from the original request of reviewing departmentally owned

    E-Print Network [OSTI]

    the merits and needs of centrally supporting mobile device technology that accesses Purdue data of several groups on campus. Mobile technology is here and on campus, so if Purdue University wants investigation that we really must focus on all mobile device technology that would access Purdue data

  9. In this paper, an AlGaN/GaN high electron mobility transistor (HEMT) device based on a

    E-Print Network [OSTI]

    Yang, Kyounghoon

    205 Abstract In this paper, an AlGaN/GaN high electron mobility transistor (HEMT) device basedBm at 2 GHz have been demonstrated from the fabricated device. 1. Introduction In recent years, AlGaN/GaN noise amplifier and switch. Superior results have been reported in microwave power performance of AlGaN/GaN

  10. Persistent Personal Names for Globally Connected Mobile Devices Bryan Ford, Jacob Strauss, Chris Lesniewski-Laas, Sean Rhea, Frans Kaashoek, Robert Morris

    E-Print Network [OSTI]

    Persistent Personal Names for Globally Connected Mobile Devices Bryan Ford, Jacob Strauss, Chris personal names. Users assign personal names through an ad hoc device introduction process requiring, and mobile personal devices usu- ally have dynamic IP addresses behind firewalls or net- work address

  11. Persistent Personal Names for Globally Connected Mobile Devices Bryan Ford, Jacob Strauss, Chris LesniewskiLaas, Sean Rhea, Frans Kaashoek, Robert Morris

    E-Print Network [OSTI]

    Ford, Bryan

    Persistent Personal Names for Globally Connected Mobile Devices Bryan Ford, Jacob Strauss, Chris personal names. Users assign personal names through an ad hoc device introduction process requiring, and mobile personal devices usu­ ally have dynamic IP addresses behind firewalls or net­ work address

  12. Abstract--With the increasing deployment of overlay networks, a mobile host with a range of network interfaces can be connected

    E-Print Network [OSTI]

    Atkinson, Robert C

    Hierarchical MIPv6. Address management strategy in mobile host multihoming context is investigatedAbstract--With the increasing deployment of overlay networks, a mobile host with a range of network interfaces can be connected to multiple access networks simultaneously. Such multihoming technology can

  13. A near-Zero Run-time Energy Overhead within a Computation Outsourcing Framework for Energy Management in Mobile Devices

    E-Print Network [OSTI]

    Helal, Abdelsalam

    with a run-time monitoring system that consumes an extremely low amount of energy (near-Zero). This near Monitor, Battery Monitor. 1. Introduction Energy/Power management in mobile devices has been and continues incurring a near-Zero run-time overhead. Key Words- Energy Management, Outsourcing, Smart Spaces, Energy

  14. Solar Energy Materials & Solar Cells 78 (2003) 567595 Low-mobility solar cells: a device physics primer

    E-Print Network [OSTI]

    Schiff, Eric A.

    Solar Energy Materials & Solar Cells 78 (2003) 567­595 Low-mobility solar cells: a device physics, Syracuse, New York 13244-1130, USA Abstract The properties of pin solar cells based on photogeneration for the solar conversion efficiency of amorphous silicon-based cells that are limited by valence bandtail

  15. Development and optimization of a beam shaper device for a mobile dedicated IOERT accelerator

    SciTech Connect (OSTI)

    Soriani, Antonella; Iaccarino, Giuseppe; Felici, Giuseppe; Ciccotelli, Alessia; Pinnaro, Paola; Giordano, Carolina; Benassi, Marcello; D'Andrea, Marco; Bellesi, Luca; Strigari, Lidia [Laboratory of Medical Physics and Expert Systems, National Cancer Institute Regina Elena, 00144 Rome (Italy); Sordina S.p.A Technical Division, Rome 00126 (Italy); Radiation Oncology Department, National Cancer Institute Regina Elena, 00144 Rome (Italy); Medical Physics Department, IRCCS Istituto Scientifico Romagnolo per lo Studio e la Cura dei tumori, 47014 Meldola (Italy); Laboratory of Medical Physics and Expert Systems, National Cancer Institute Regina Elena, 00144 Rome (Italy)

    2012-10-15T23:59:59.000Z

    Purpose: The aim of this study was to design and build a prototype beam shaper to be used on a dedicated mobile accelerator that protects organs at risk within the radiation field and conforms the beam to the target geometry during intraoperative electron radiotherapy (IOERT). A dosimetric characterization of the beam shaper device was performed based on Monte Carlo (MC) simulations, as well as experimental data, at different energies, field sizes, and source to skin distances. Methods: A mobile light intraoperative accelerator (LIAC{sup Registered-Sign }, Sordina, Italy) was used. The design of the beam shaper prototype was based on MC simulations (BEAMnrc/OMEGA and DOSXYZnrc code) for a selection of materials and thicknesses, as well as for dosimetric characterization. Percentage depth dose (PDD) and profile measurements were performed using a p-type silicon diode and a commercial water phantom, while output factors were measured using a PinPoint ion chamber in a PMMA phantom. Planar doses in planes of interest were carried out using radiochromic films (Gafchromic{sup TM} EBT and EBT2) in PMMA and in a Solid Water{sup Registered-Sign} phantom. Several experimental set-ups were investigated with the beam shaper device fixed on the top of the phantom, varying both the short side of the rectangular field and the air gap between the device and the phantom surface, simulating the clinical situation. The output factors (OFs) were determined using different geometrical set-ups and energies. Results: The beam shaper prototype consists of four blades sliding alongside each other and mounted on a special support at the end of the 10 cm diameter PMMA circular applicator. Each blade is made of an upper layer of 2.6 cm of Teflon{sup Registered-Sign} and a lower layer of 8 mm of stainless steel. All rectangles inscribed in a 5 cm diameter can be achieved in addition to any 'squircle-shaped' field. When one side of the rectangular field is held constant and the second side is reduced, both R{sub 50} and R{sub max} move towards the phantom surface. Comparing the PDDs obtained with the 5 cm circular applicator and with a 4.4 Multiplication-Sign 4.4 cm{sup 2} square field (that is the equivalent square of the 5 cm circular field) obtained with the beam shaper, a different behavior was observed in the region extending from the surface to a depth of 50% of the maximum dose. Isodoses measured for rectangular fields used for clinical cases (i.e., 4 Multiplication-Sign 9 cm{sup 2} 8 MeV) are shown, with different air gaps. For each energy investigated, the normalized OFs slowly increase, when the length of the side decreases down to about 4 cm, and then rapidly decreases for smaller field widths. MC simulation showed an excellent agreement with experimental data (<2%). Conclusions: The beam shaper device is able to provide square/rectangular/squircle fields with adequate dose homogeneity for mobile dedicated accelerators, thus allowing conformal treatment with IOERT. Monte Carlo simulation can be a very useful tool to simulate any clinical set up and can be used to create a data set to calculate MUs, thereby increasing the accuracy of the delivered dose during IOERT procedures.

  16. CoolSpots: Reducing the Power Consumption of Wireless Mobile Devices with Multiple Radio Interfaces

    E-Print Network [OSTI]

    Gupta, Rajesh

    Lifetime (Hours,1300mAHbattery) Comm Power System Power Battery Lifetime Permission to make digital or hard copies

  17. Wind Display Device for Locomotion Interface in a Virtual Environment Sandip Kulkarni, Charles Fisher, Eric Pardyjak, Mark Minor and John Hollerbach

    E-Print Network [OSTI]

    Hollerbach, John M.

    Wind Display Device for Locomotion Interface in a Virtual Environment Sandip Kulkarni, Charles ABSTRACT This paper describes development of a wind display system for the TreadPort virtual environment locomotion interface, which is cumulatively known as the TreadPort Active Wind Tunnel (TPAWT). Computational

  18. Jamming user interfaces: Programmable particle stiffness and sensing for malleable and shape-changing devices

    E-Print Network [OSTI]

    Leithinger, Daniel

    Malleable and organic user interfaces have the potential to enable radically new forms of interactions and expressiveness through flexible, free-form and computationally controlled shapes and displays. This work, specifically ...

  19. Design and Implementation of Functional Nanoelectronic Interfaces With Biomolecules, Cells, and Tissue Using Nanowire Device Arrays

    E-Print Network [OSTI]

    Timko, Brian P.

    Nanowire FETs (NWFETs) are promising building blocks for nanoscale bioelectronic interfaces with cells and tissue since they are known to exhibit exquisite sensitivity in the context of chemical and biological detection, ...

  20. Plasma-Material Interface Development for Future Spherical Tokamak-based Devices in NSTX.

    SciTech Connect (OSTI)

    et. al, V

    2011-09-24T23:59:59.000Z

    The divertor plasma-material interface (PMI) must be able to withstand steady-state heat fluxes up to 10 MW/m{sup 2} (a limit imposed by the present day divertor material and engineering constraints) with minimal material erosion, as well as to provide impurity control and ion density pumping capabilities. In spherical tokamaks (STs), the compact divertor geometry and the requirement of low core electron collisionality n*{sub e} at n{sub e} < 0.5-0.7 n{sub G} (where n{sub G} is the Greenwald density) for increased neutral beam current drive efficiency impose much greater demands on divertor and first-wall particle and heat flux mitigation solutions. In NSTX, divertor heat flux mitigation and impurity control with an innovative 'snowflake' divertor configuration and ion density pumping by evaporated lithium wall and divertor coatings are studied. Lithium coatings have enabled ion density reduction up to 50% in NSTX through the reduction of wall and divertor recycling rates. The 'snowflake' divertor configuration was obtained in NSTX in 0.8-1 MA 4-6 MW NBI-heated H-mode lithium-assisted discharges using three divertor coils. The snowflake divertor formation was always accompanied by a partial detachment of the outer strike point with an up to 50% increase in divertor radiation from intrinsic carbon, the peak divertor heat flux reduction from 3-6 MW/m{sup 2} to 0.5-1 MW/m{sup 2}, and a significant increase in divertor volume recombination. High core confinement was maintained with the snowflake divertor, evidenced by the t{sub E}, W{sub MHD} and the H98(y,2) factors similar to those of the standard divertor discharges. Core carbon concentration and radiated power were reduced by 30-70%, apparently as a result of reduced divertor physical and chemical sputtering in the snowflake divertor and ELMs. In the SFD discharges, the MHD stability of the H-mode pedestal region was altered leading to the re-appearance of medium size (DW/W = 5-10%), Type I, ELMs otherwise suppressed due to lithium conditioning. Fast divertor measurements showed that impulsive particle and heat fluxes due to the ELMs were significantly dissipated in the high magnetic flux expansion region of the snowflake divertor. The snowflake divertor configuration is being combined in experiments with extrinsic deuterium or impurity gas puffing for increased dissipative divertor power losses, additional upper divertor nulls for increased power sharing between the upper and the lower divertors, and lithium coated plasma facing components for large area ion pumping. These efforts are aimed at the development of an integrated PMI for future ST-based devices for fusion development applications.

  1. Privacy-enhanced Intelligent Automatic Form Filling for Context-aware Services on Mobile Devices

    E-Print Network [OSTI]

    now these services are not widely accepted in Europe. Many people have devices and service contracts

  2. It's Not What You Have, But How You Use It: Compromises in Mobile Device Use

    E-Print Network [OSTI]

    Tungare, Manas

    2008-01-01T23:59:59.000Z

    As users begin to use many more devices for personal information management (PIM) than just the traditional desktop computer, it is essential for HCI researchers to understand how these devices are being used in the wild and their roles in users' information environments. We conducted a study of 220 knowledge workers about their devices, the activities they performed on each, and the groups of devices used together. Our findings indicate that several devices are often used in groups; integrated multi-function portable devices have begun to replace single-function devices for communication (e.g. email and IM). Users use certain features opportunistically because they happen to be carrying a multi-function device with them. The use of multiple devices and multi-function devices is fraught with compromises as users must choose and make trade-offs among various factors.

  3. Natural Language Interfaces for Data Warehouses Nicolas Kuchmann-Beauger

    E-Print Network [OSTI]

    Boyer, Edmond

    , a new class of search systems, such as Wolfram|Alpha 1 , became popular: question answering systems interfaces in commercial BI tools allow users to combine dimensions and measures to build queries. New device access to mobile devices bring new challenges. In particular, recent success of speech

  4. Extending the Lifetime of a Network of Battery-Powered Mobile Devices by Remote Processing: A Markovian Decision-based Approach

    E-Print Network [OSTI]

    Pedram, Massoud

    Extending the Lifetime of a Network of Battery-Powered Mobile Devices by Remote Processing the lifetime of a battery- powered mobile host in a client-server wireless network by using task migration-line adaptive policy is proposed, which dynamically monitors the channel conditions and the server behavior

  5. Applying Data Mining Techniques to Address Disaster Information Management Challenges on Mobile Devices

    E-Print Network [OSTI]

    Chen, Shu-Ching

    Applying Data Mining Techniques to Address Disaster Information Management Challenges on Mobile a collaborative solution on a mobile platform using advanced data mining and information retrieval techniques.8 [Database Applications]: Data mining; H.3.3 [Information Search and Retrieval]: Clustering; H.3.5 [Online

  6. Laterally Mobile, Functionalized Self-Assembled Monolayers at the Fluorous?Aqueous Interface in a Plug-Based Microfluidic System: Characterization and Testing with Membrane Protein Crystallization

    SciTech Connect (OSTI)

    Kreutz, Jason E.; Li, Liang; Roach, L. Spencer; Hatakeyama, Takuji; Ismagilov, Rustem F.; (UC)

    2009-11-04T23:59:59.000Z

    This paper describes a method to generate functionalizable, mobile self-assembled monolayers (SAMs) in plug-based microfluidics. Control of interfaces is advancing studies of biological interfaces, heterogeneous reactions, and nanotechnology. SAMs have been useful for such studies, but they are not laterally mobile. Lipid-based methods, though mobile, are not easily amenable to setting up the hundreds of experiments necessary for crystallization screening. Here we demonstrate a method, complementary to current SAM and lipid methods, for rapidly generating mobile, functionalized SAMs. This method relies on plugs, droplets surrounded by a fluorous carrier fluid, to rapidly explore chemical space. Specifically, we implemented his-tag binding chemistry to design a new fluorinated amphiphile, RfNTA, using an improved one-step synthesis of RfOEG under Mitsunobu conditions. RfNTA introduces specific binding of protein at the fluorous-aqueous interface, which concentrates and orients proteins at the interface, even in the presence of other surfactants. We then applied this approach to the crystallization of a his-tagged membrane protein, Reaction Center from Rhodobacter sphaeroides, performed 2400 crystallization trials, and showed that this approach can increase the range of crystal-producing conditions, the success rate at a given condition, the rate of nucleation, and the quality of the crystal formed.

  7. Controlled growth of larger heterojunction interface area for organic photosensitive devices

    DOE Patents [OSTI]

    Yang, Fan (Somerset, NJ); Forrest, Stephen R. (Ann Arbor, MI)

    2009-12-29T23:59:59.000Z

    An optoelectronic device and a method of fabricating a photosensitive optoelectronic device includes depositing a first organic semiconductor material on a first electrode to form a continuous first layer having protrusions, a side of the first layer opposite the first electrode having a surface area at least three times greater than an underlying lateral cross-sectional area; depositing a second organic semiconductor material directly on the first layer to form a discontinuous second layer, portions of the first layer remaining exposed; depositing a third organic semiconductor material directly on the second layer to form a discontinuous third layer, portions of at least the second layer remaining exposed; depositing a fourth organic semiconductor material on the third layer to form a continuous fourth layer, filling any exposed gaps and recesses in the first, second, and third layers; and depositing a second electrode on the fourth layer, wherein at least one of the first electrode and the second electrode is transparent, and the first and third organic semiconductor materials are both of a donor-type or an acceptor-type relative to second and fourth organic semiconductor materials, which are of the other material type.

  8. Location Based Challenges on Mobile Devices for a Fuel Efficient Driving Behavior

    E-Print Network [OSTI]

    while driving. 1 Introduction Global warming and rising oil prices have led to a state of increased task in real-time. On the other hand interfaces for giving feedback about the driver's historic fuel concept of location based challenges allows the combination of the idea of historic competitive systems

  9. SUPPLEMENTAL EXPORT COMPLIANCE PROCEDURES FOR TRAVEL WITH MOBILE DEVICES & RESEARCH EQUIPMENT To ensure that SAO-affiliated persons, who work on export-controlled projects and travel with their

    E-Print Network [OSTI]

    SUPPLEMENTAL EXPORT COMPLIANCE PROCEDURES FOR TRAVEL WITH MOBILE DEVICES & RESEARCH EQUIPMENT I. Purpose To ensure that SAO-affiliated persons, who work on export-controlled projects and travel with their laptops and mobile devices, take additional export compliance security precautions in advance and bring

  10. Comprehensive magnetotransport characterization of two dimensional electron gas in AlGaN/GaN high electron mobility transistor structures leading to the assessment of interface roughness

    SciTech Connect (OSTI)

    Mishra, Manna Kumari [Solid State Physics Laboratory, Lucknow Road, Timarpur, Delhi-110054 (India); Netaji Subhas Institute of Technology, Dwarka, New Delhi-110078 (India); Sharma, Rajesh K., E-mail: rksharma@sspl.drdo.in; Manchanda, Rachna; Bag, Rajesh K.; Muralidharan, Rangarajan [Solid State Physics Laboratory, Lucknow Road, Timarpur, Delhi-110054 (India); Thakur, Om Prakash [Netaji Subhas Institute of Technology, Dwarka, New Delhi-110078 (India)

    2014-09-15T23:59:59.000Z

    Magnetotransport in two distinct AlGaN/GaN HEMT structures grown by Molecular Beam Epitaxy (MBE) on Fe-doped templates is investigated using Shubnikov de-Haas Oscillations in the temperature range of 1.8–6 K and multicarrier fitting in the temperature range of 1.8–300 K. The temperature dependence of the two dimensional electron gas mobility is extracted from simultaneous multicarrier fitting of transverse and longitudinal resistivity as a function of magnetic field and the data is utilized to estimate contribution of interface roughness to the mobility and the corresponding transport lifetime. The quantum scattering time obtained from the analysis of Shubnikov de Haas Oscillations in transverse magnetoresistance along with the transport lifetime time were used to estimate interface roughness amplitude and lateral correlation length. The results indicate that the insertion of AlN over layer deposited prior to the growth of GaN base layer on Fe doped GaN templates for forming HEMT structures reduced the parallel conduction but resulted in an increase in interface roughness.

  11. Cu(In,Ga)Se{sub 2} absorber thinning and the homo-interface model: Influence of Mo back contact and 3-stage process on device characteristics

    SciTech Connect (OSTI)

    Leonard, E.; Arzel, L.; Tomassini, M.; Barreau, N., E-mail: nicolas.barreau@univ-nantes.fr [Institut des Matériaux Jean Rouxel (IMN)-UMR 6502, Université de Nantes, CNRS, 2 rue de la Houssiničre, BP 32229, 44322 Nantes Cedex 3 (France); Zabierowski, P. [Faculty of Physics, Warsaw University of Technology, Koszykowa 75, PL 00-662 Warsaw (Poland); Fuertes Marrón, D. [Instituto de Energía Solar–ETSIT, Technical University of Madrid, Ciudad Universitaria s.n., 28040 Madrid (Spain)

    2014-08-21T23:59:59.000Z

    Thinning the absorber layer is one of the possibilities envisaged to further decrease the production costs of Cu(In,Ga)Se{sub 2} (CIGSe) thin films solar cell technology. In the present study, the electronic transport in submicron CIGSe-based devices has been investigated and compared to that of standard devices. It is observed that when the absorber is around 0.5??m-thick, tunnelling enhanced interface recombination dominates, which harms cells energy conversion efficiency. It is also shown that by varying either the properties of the Mo back contact or the characteristics of 3-stage growth processing, one can shift the dominating recombination mechanism from interface to space charge region and thereby improve the cells efficiency. Discussions on these experimental facts led to the conclusions that 3-stage process implies the formation of a CIGSe/CIGSe homo-interface, whose location as well as properties rule the device operation; its influence is enhanced in submicron CIGSe based solar cells.

  12. INFORMATION DEVICES AND

    E-Print Network [OSTI]

    Mottram, Nigel

    to access or hold sensitive, confidential or personal information on mobile devices, such as laptopsPROTECTION OF INFORMATION HELD ON MOBILE DEVICES AND ENCRYPTION POLICY (V3.5) the place of useful;Protection of Information Held on Mobile Devices and Encryption Policy (v3.5) Page 1 Table of Contents 1

  13. The design and construction of electronic motor control and network interface hardware for advance concept urban mobility vehicles

    E-Print Network [OSTI]

    Morrissey, Bryan L. (Bryan Lawrence)

    2008-01-01T23:59:59.000Z

    Over the past several years, the Smart Cities Group at MIT's Media Lab has engaged in research to develop several advanced concepts for vehicles to improve urban mobility. This research has focused on developing a modular ...

  14. Conduction at a ferroelectric interface

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Marshall, Matthew S. J.; Malashevich, Andrei; Disa, Ankit S.; Han, Myung-Guen; Chen, Hanghui; Zhu, Yimei; Ismail-Beigi, Sohrab; Walker, Frederick J.; Ahn, Charles H.

    2014-11-01T23:59:59.000Z

    Typical logic elements utilizing the field effect rely on the change in carrier concentration due to the field in the channel region of the device. Ferroelectric-field-effect devices provide a nonvolatile version of this effect due to the stable polarization order parameter in the ferroelectric. In this work, we describe an oxide/ oxide ferroelectric heterostructure device based on (001)-oriented PbZr??.?Ti?.?O?-LaNiO? where the dominant change in conductivity is a result of a significant mobility change in the interfacial channel region. The effect is confined to a few atomic layers at the interface and is reversible by switching the ferroelectric polarization. More interestingly,more »in one polarization state, the field effect induces a 1.7-eV shift of the interfacial bands to create a new conducting channel in the interfacial PbO layer of the ferroelectric.« less

  15. Conduction at a ferroelectric interface

    SciTech Connect (OSTI)

    Marshall, Matthew S. J. [Yale Univ., New Haven, CT (United States); Malashevich, Andrei [Yale Univ., New Haven, CT (United States); Disa, Ankit S. [Yale Univ., New Haven, CT (United States); Han, Myung-Guen [Brookhaven National Lab. (BNL), Upton, NY (United States); Chen, Hanghui [Yale Univ., New Haven, CT (United States); Zhu, Yimei [Brookhaven National Lab. (BNL), Upton, NY (United States); Ismail-Beigi, Sohrab [Yale Univ., New Haven, CT (United States); Walker, Frederick J. [Yale Univ., New Haven, CT (United States); Ahn, Charles H. [Yale Univ., New Haven, CT (United States);

    2014-11-01T23:59:59.000Z

    Typical logic elements utilizing the field effect rely on the change in carrier concentration due to the field in the channel region of the device. Ferroelectric-field-effect devices provide a nonvolatile version of this effect due to the stable polarization order parameter in the ferroelectric. In this work, we describe an oxide/ oxide ferroelectric heterostructure device based on (001)-oriented PbZr??.?Ti?.?O?-LaNiO? where the dominant change in conductivity is a result of a significant mobility change in the interfacial channel region. The effect is confined to a few atomic layers at the interface and is reversible by switching the ferroelectric polarization. More interestingly, in one polarization state, the field effect induces a 1.7-eV shift of the interfacial bands to create a new conducting channel in the interfacial PbO layer of the ferroelectric.

  16. Handheld portable real-time tracking and communications device

    DOE Patents [OSTI]

    Wiseman, James M. (Albuquerque, NM); Riblett, Jr., Loren E. (Edgewood, NM); Green, Karl L. (Albuquerque, NM); Hunter, John A. (Albuquerque, NM); Cook, III, Robert N. (Rio Rancho, NM); Stevens, James R. (Arlington, VA)

    2012-05-22T23:59:59.000Z

    Portable handheld real-time tracking and communications devices include; a controller module, communications module including global positioning and mesh network radio module, data transfer and storage module, and a user interface module enclosed in a water-resistant enclosure. Real-time tracking and communications devices can be used by protective force, security and first responder personnel to provide situational awareness allowing for enhance coordination and effectiveness in rapid response situations. Such devices communicate to other authorized devices via mobile ad-hoc wireless networks, and do not require fixed infrastructure for their operation.

  17. Mobile Technology Management

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2014-05-15T23:59:59.000Z

    The order establishes requirements, assigns responsibilities, and provides guidance for federal mobile technology management and employee use of both government furnished and personally-owned mobile devices within DOE and NNSA. Establishes requirements for use of User Agreements to govern mobile devices used for official duties. Does not cancel other directives.

  18. Roughness of the SiC/SiO{sub 2} vicinal interface and atomic structure of the transition layers

    SciTech Connect (OSTI)

    Liu, Peizhi; Li, Guoliang; Duscher, Gerd, E-mail: gduscher@utk.edu [Department of Materials Science and Engineering, The University of Tennessee, Knoxville, Tennessee 37996 (United States); Sharma, Yogesh K.; Ahyi, Ayayi C.; Isaacs-Smith, Tamara; Williams, John R.; Dhar, Sarit [Department of Physics, Auburn University, Auburn, Alabama 36849 (United States)

    2014-11-01T23:59:59.000Z

    The SiC/SiO{sub 2} interface is generally considered to be the cause for the reduced electron mobility of SiC power devices. Previous studies have shown a correlation between the mobility and the transition layer width at the SiC/SiO{sub 2} interface. The authors investigated this interface with atomic resolution Z-contrast imaging and electron energy-loss spectroscopy, and discovered that this transition region was due to the roughness of the vicinal interface. The roughness of a vicinal interface consisted of atomic steps and facets deviating from the ideal off-axis cut plane. The authors conclude that this roughness is limiting the mobility in the channels of SiC MOSFETs.

  19. Tandem mobile robot system

    DOE Patents [OSTI]

    Buttz, James H. (Albuquerque, NM); Shirey, David L. (Albuquerque, NM); Hayward, David R. (Albuquerque, NM)

    2003-01-01T23:59:59.000Z

    A robotic vehicle system for terrain navigation mobility provides a way to climb stairs, cross crevices, and navigate across difficult terrain by coupling two or more mobile robots with a coupling device and controlling the robots cooperatively in tandem.

  20. CCT: Connect and Control Things A Novel Mobile Application to Manage M2M Devices and Endpoints

    E-Print Network [OSTI]

    Gesbert, David

    -to-Machine (M2M) market [1, 2]. IoT has also opened new vistas in smart metering, smart grid, smart city applications for IoT ecosystems totally indispensable. For example, in smart homes, M2M devices [6] are able

  1. Effects of interfaces on dynamics in micro-fluidic devices: slip-boundaries' impact on rotation characteristics of polar liquid film motors

    E-Print Network [OSTI]

    Zhong-Qiang Liu; Su-Rong Jiang; Tamar A. Yinnon; Xiang-Mu Kong; Ying-Jun Li

    2014-04-21T23:59:59.000Z

    Slip-boundary effects on the polar liquid film motor (PLFM) -- a novel micro-fluidic device with important implications for advancing knowledge on liquid micro-film's structure, dynamics, modeling and technology -- are studied. We develop a mathematical model, under slip boundary conditions, describing electro-hydro-dynamical rotations in the PLFMs induced either by direct current (DC) or alternating current (AC) fields. Our main results are: (i) rotation characteristics depend on the ratio $k=l_{s}/D$ ($l_{s}$ denotes the slip length, resulting from the interface's impact on the structure of the liquid and $D$ denotes the film's diameter). (ii) As $k$ ($k>-1/2$) increases: (a) PLFMs subsequently exhibit rotation characteristics under "negative-", "no-", "partial-" and "perfect-" slip boundary conditions; (b) the maximum value of the linear velocity of the steady rotating liquid film increases and its location approaches the film's border; (c) the decay of the angular velocities' dependency on the distance from the center of the film slows down, resulting in a macroscopic flow near the boundary. (iii) In addition to $k$, the rotation characteristics of the AC PLFM depend on the magnitudes, the frequencies, and the phase difference of the AC fields. (iv) Our analytical derived rotation speed distributions are consistent with the existing experimental ones.

  2. Distributed Transactions in a Mobile Computing Vivek R. Narasayya

    E-Print Network [OSTI]

    El-Ansary, Sameh

    Introduction Mobile computing technology has produced a variety of devices ranging from simple pagers to the unique characteristics of mobile hardware and wireless technology [1] One class of mobile devices in data management for mobile computing sys­ tems are those that are arise because the mobile devices move

  3. Lightweight social communication using visual media and mobile phones

    E-Print Network [OSTI]

    Cowan, Lisa G.

    2011-01-01T23:59:59.000Z

    comfortable handing their personal device over to anotherThese ubiquitous, personal devices have the capability tothe mobile phone is a personal device, it is possible that

  4. A taxonomy and business analysis for mobile web applications

    E-Print Network [OSTI]

    Liu, Kevin H

    2009-01-01T23:59:59.000Z

    Mobile web applications refer to web applications on mobile devices, aimed at personalizing, integrating, and discovering mobile contents in user contexts. This thesis presents a comprehensive study of mobile web applications ...

  5. Ion mobility sensor system

    DOE Patents [OSTI]

    Xu, Jun; Watson, David B.; Whitten, William B.

    2013-01-22T23:59:59.000Z

    An ion mobility sensor system including an ion mobility spectrometer and a differential mobility spectrometer coupled to the ion mobility spectrometer. The ion mobility spectrometer has a first chamber having first end and a second end extending along a first direction, and a first electrode system that generates a constant electric field parallel to the first direction. The differential mobility spectrometer includes a second chamber having a third end and a fourth end configured such that a fluid may flow in a second direction from the third end to the fourth end, and a second electrode system that generates an asymmetric electric field within an interior of the second chamber. Additionally, the ion mobility spectrometer and the differential mobility spectrometer form an interface region. Also, the first end and the third end are positioned facing one another so that the constant electric field enters the third end and overlaps the fluid flowing in the second direction.

  6. Competition and Collaboration in Mobile Banking: A Stakeholder Analysis

    E-Print Network [OSTI]

    Kurnia, Sherah

    of mobile technologies offers an opportunity for mobile carriers and banks to offer mobile banking services technology-aware customers. For banks, mobile banking is the next sequence after Internet banking. Thanks to the development of mobile technology which enables the delivery of banking services via mobile devices, mobile

  7. AGREEMENT FOR MOBILE TECHNOLOGY ACCESS AND ALLOWANCE

    E-Print Network [OSTI]

    Oregon, University of

    AGREEMENT FOR MOBILE TECHNOLOGY ACCESS AND ALLOWANCE My signature on the "Mobile Technology Access and conditions identified in the Access to Mobile Technology and the Payment Options for Mobile Technology policies [http://hr.uoregon.edu/policy/MobileTechnologyDevice.html]. 2. I understand that that I must

  8. Integration of Advanced Materials and Interfaces for Durable...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Advanced Materials and Interfaces for Durable Thermoelectric Automobile Exhaust Waste Heat Harvesting Devices Integration of Advanced Materials and Interfaces for Durable...

  9. Challenges in Security and Privacy for Mobile Edge-Clouds

    E-Print Network [OSTI]

    of mobile personal devices such as smartphones and tablets today, with their growing com- putational and privacy of users' mobile devices and their personal data on these devices presents a significant obstacle-3890 Abstract Mobile devices such as smartphones and tablets are ubiquitous today, and many of them possess

  10. Please cite this article in press as: E.J. Vergara, et al., EnergyBox: Disclosing the wireless transmission energy cost for mobile devices, Sustain. Comput.: Inform. Syst. (2014), http://dx.doi.org/10.1016/j.suscom.2014.03.008

    E-Print Network [OSTI]

    2014-01-01T23:59:59.000Z

    transmission energy cost for mobile devices, Sustain. Comput.: Inform. Syst. (2014), http://dx.doi.org/10 environment of a major mobile operator in Sweden. A comparison with real power traces indicates that EnergyPlease cite this article in press as: E.J. Vergara, et al., EnergyBox: Disclosing the wireless

  11. Supporting Mobile Service Usage through Physical Mobile Interaction Gregor Broll1

    E-Print Network [OSTI]

    Service technology and Physical Mobile Interaction. This interaction paradigm uses mobile devicesSupporting Mobile Service Usage through Physical Mobile Interaction Gregor Broll1 , Sven Siorpaes1 albrecht.schmidt@ifi.lmu.de Abstract Although mobile services can be used ubiquitously, their employment

  12. Abstract--an interplay between mobile devices and static sensor nodes is envisioned in the near future. This will enable a

    E-Print Network [OSTI]

    Shatz, Sol M.

    the mobility and transmission flexibility of objects at the upper layer. We propose a pull query model constraints encountered in traditional static sensor networks by taking advantage of the more powerful mobile. One of our key goals is to achieve energy-efficient query injection and data collection by leveraging

  13. Active Mode Power Management for Mobile Devices This research was partially supported by Microsoft Research, und grant number: 4514203-12.

    E-Print Network [OSTI]

    Helal, Abdelsalam

    roaming. Mobile connectivity is fully available, but at the precious price of increased energy consumption. This increased energy consumption reduces mobility, requiring frequent, undesired recharge sessions. Current with the user. But different applications require different levels of connectivity, and thus different energy

  14. AAAA ResourceResourceResourceResource DiscoveryDiscoveryDiscoveryDiscovery AlgorithmAlgorithmAlgorithmAlgorithm inininin MobileMobileMobileMobile GridGridGridGrid ComputingComputingComputingComputing basedbasedbasedbased onononon IP-pagingIP-pagingIP-pagi

    E-Print Network [OSTI]

    Boyer, Edmond

    on the mobile grid computing framework to manage idle mobile devices. Within this framework, we discuss several technology, the use of mobile devices is rapidly increasing. Researches in Grid computing [6] tried, the management of mobile devices deserve many careful considerations, such as mobility management, disconnected

  15. Thermostat Interface and Usability: A Survey

    E-Print Network [OSTI]

    Meier, Alan

    2011-01-01T23:59:59.000Z

    thermostat was part of a smart home system developed by theproduct/smart-overview/) Figure 4: Control4 home automationhome: personal computers, peripherals, mobile computing devices, smart

  16. Methods for passivating silicon devices at low temperature to achieve low interface state density and low recombination velocity while preserving carrier lifetime

    DOE Patents [OSTI]

    Chen, Zhizhang (Duluth, GA); Rohatgi, Ajeet (Marietta, GA)

    1995-01-01T23:59:59.000Z

    A new process has been developed to achieve a very low SiO.sub.x /Si interface state density D.sub.it, low recombination velocity S (<2 cm/s), and high effective carrier lifetime T.sub.eff (>5 ms) for oxides deposited on silicon substrates at low temperature. The technique involves direct plasma-enhanced chemical vapor deposition (PECVD), with appropriate growth conditions, followed by a photo-assisted rapid thermal annealing (RTA) process. Approximately 500-A-thick SiO.sub.x layers are deposited on Si by PECVD at 250.degree. C. with 0.02 W/cm.sup.-2 rf power, then covered with SiN or an evaporated thin aluminum layer, and subjected to a photo-assisted anneal in forming gas ambient at 350.degree. C., resulting in an interface state density D.sub.it in the range of about 1-4.times.10.sup.10 cm.sup.-2 eV.sup.-1, which sets a record for the lowest interface state density D.sub.it for PECVD oxides fabricated to date. Detailed analysis shows that the PECVD deposition conditions, photo-assisted anneal, forming gas ambient, and the presence of an aluminum layer on top of the oxides during the anneal, all contributed to this low value of interface state density D.sub.it. Detailed metal-oxide semiconductor analysis and model calculations show that such a low recombination velocity S is the result of moderately high positive oxide charge (5.times.10.sup.11 -1.times.10.sup.12 cm.sup.-2) and relatively low midgap interface state density (1.times.10.sup.10 -4.times.10.sup.10 cm.sup.-2 eV.sup.-1). Photo-assisted anneal was found to be superior to furnace annealing, and a forming gas ambient was better than a nitrogen ambient for achieving a very low surface recombination velocity S.

  17. Custom power supply interface for teaching circuit design

    E-Print Network [OSTI]

    Madrigal, Ruben E. (Ruben Esteban)

    2014-01-01T23:59:59.000Z

    This thesis discusses the design and implementation of a custom power supply interface for the Pioneer mobile robot used in MIT's 6.01 course, "Introduction to Electrical Engineering and Computer Science." The interface ...

  18. Foot Tapping for Mobile Interaction Andrew Crossan, Stephen Brewster, Alexander Ng

    E-Print Network [OSTI]

    Williamson, John

    become a standard part of mobile interfaces. Touch screens allow a user to quickly and easily perform

  19. E-Gesture: A Collaborative Architecture for Energy-efficient Ges-ture Recognition with Hand-worn Sensor and Mobile Devices

    E-Print Network [OSTI]

    E-Gesture: A Collaborative Architecture for Energy-efficient Ges- ture Recognition with Hand the design, imple- mentation, and evaluation of E-Gesture, an energy-efficient gesture recognition system, Experimentation, Measurement, Performance Keywords Energy Efficiency, Mobile Gesture Recognition, Closed- loop

  20. AGREEMENT FOR MOBILE TECHNOLOGY ACCESS AND My signature on the "Mobile Technology Access and Payment Option Request"

    E-Print Network [OSTI]

    Oregon, University of

    AGREEMENT FOR MOBILE TECHNOLOGY ACCESS AND ALLOWANCE My signature on the "Mobile Technology Access and conditions identified in the Access to Mobile Technology and the Payment Options for Mobile Technology policies [http://hr.uoregon.edu/policy/MobileTechnologyDevice.html]. 2. I understand that that I must

  1. Audio-Visual Multimedia Retrieval on Mobile Iftikhar Ahmad1

    E-Print Network [OSTI]

    Gabbouj, Moncef

    of devices (hand held phones to personal computers). Mobile devices are not only limited in size, shape devices is a challenge. 8.1 Introduction The amount of personal digital information is increasing8 Audio-Visual Multimedia Retrieval on Mobile Devices Iftikhar Ahmad1 and Moncef Gabbouj2 1 Nokia

  2. Demo: E-Gesture A Collaborative Architecture for Energy-efficient Gesture Recognition with Hand-worn Sensor and Mobile Devices

    E-Print Network [OSTI]

    of segmentation accuracy. Classification Architecture: In addition to energy-efficient ar- chitecture, weDemo: E-Gesture ­ A Collaborative Architecture for Energy-efficient Gesture Recognition with Hand architecture for energy- efficient gesture recognition on a hand-worn sensor device and an off

  3. In-situ characterization of growth and interfaces in a-Si:H devices. Annual subcontract report, 1 May 1992--30 April 1993

    SciTech Connect (OSTI)

    Collins, R.W.; Wronski, C.R.; An, I.; Lu, Y.; Nguyen, H.V. [Pennsylvania State Univ., University Park, PA (United States)

    1994-02-01T23:59:59.000Z

    This report describes work to reach two goals--an individual goal and a wide-gap team goal. The individual goal was to investigate the ``top junction`` for defects using the spectroscopic ellipsometry technique. This will include an evaluation if specific defects are associated with C, B, Sn (diffusing from the transparent conducting oxide [TCO]) or Na (diffusing from the glass). It may include an assessment of the function of a graded a-SiC:H buffer layer. As defects are identified and characterized, their influence on the transport properties will be assessed. This should lead to better parameters used as input to models for the electronic materials and device performance. The goal of the wide-gap team was to demonstrate, characterize, and understand improved doped and undoped ``wide gap`` materials for use in achieving 15%-efficient stabilized photovoltaic modules (``wide gap`` materials are defined by this team to have a band gap {ge} 1.9 eV). The major conclusions of the research are discussed in the report.

  4. Device-transparent personal storage

    E-Print Network [OSTI]

    Strauss, Jacob A. (Jacob Alo), 1979-

    2010-01-01T23:59:59.000Z

    Users increasingly store data collections such as digital photographs on multiple personal devices, each of which typically presents the user with a storage management interface isolated from the contents of all other ...

  5. Device for two-dimensional gas-phase separation and characterization of ion mixtures

    DOE Patents [OSTI]

    Tang, Keqi (Richland, WA); Shvartsburg, Alexandre A. (Richland, WA); Smith, Richard D. (Richland, WA)

    2006-12-12T23:59:59.000Z

    The present invention relates to a device for separation and characterization of gas-phase ions. The device incorporates an ion source, a field asymmetric waveform ion mobility spectrometry (FAIMS) analyzer, an ion mobility spectrometry (IMS) drift tube, and an ion detector. In one aspect of the invention, FAIMS operating voltages are electrically floated on top of the IMS drift voltage. In the other aspect, the FAIMS/IMS interface is implemented employing an electrodynamic ion funnel, including in particular an hourglass ion funnel. The present invention improves the efficiency (peak capacity) and sensitivity of gas-phase separations; the online FAIMS/IMS coupling creates a fundamentally novel two-dimensional gas-phase separation technology with high peak capacity, specificity, and exceptional throughput.

  6. Share this with Today's enterprises are mobile. With a multitude

    E-Print Network [OSTI]

    Fisher, Kathleen

    Without MDM An enterprise mobile device management (MDM) strategy paired with the appropriate technology management platform can increase the costs associated with mobile inventory, and can reduce the organization's ability to respond to technology trends in a timely manner. Whether mobile devices are owned

  7. Analytical models for total dose ionization effects in MOS devices.

    SciTech Connect (OSTI)

    Campbell, Phillip Montgomery; Bogdan, Carolyn W.

    2008-08-01T23:59:59.000Z

    MOS devices are susceptible to damage by ionizing radiation due to charge buildup in gate, field and SOI buried oxides. Under positive bias holes created in the gate oxide will transport to the Si / SiO{sub 2} interface creating oxide-trapped charge. As a result of hole transport and trapping, hydrogen is liberated in the oxide which can create interface-trapped charge. The trapped charge will affect the threshold voltage and degrade the channel mobility. Neutralization of oxidetrapped charge by electron tunneling from the silicon and by thermal emission can take place over long periods of time. Neutralization of interface-trapped charge is not observed at room temperature. Analytical models are developed that account for the principal effects of total dose in MOS devices under different gate bias. The intent is to obtain closed-form solutions that can be used in circuit simulation. Expressions are derived for the aging effects of very low dose rate radiation over long time periods.

  8. Supporting Mobile Service Interaction through Semantic Service Description Annotation and

    E-Print Network [OSTI]

    to these characteristics, Semantic Web Service technology is probably the most promising candidate for connecting mobile devices supports this technology, the mobile usage of Web Services is still rather constrained that support and facilitate Physical Mobile Interaction. Semantic Web Service technology helps realising mobile

  9. Understanding Sharing Preferences and Behavior for mHealth Devices

    E-Print Network [OSTI]

    of the collection and sharing of their personal health information collected using mobile health (mHealth) devices controls for mobile devices and applications that collect any personal and activity informationUnderstanding Sharing Preferences and Behavior for mHealth Devices Aarathi Prasad1 , Jacob Sorber2

  10. Instant Personalization and Temporary Ownership of Handheld Devices Jurgen Bohn

    E-Print Network [OSTI]

    Instant Personalization and Temporary Ownership of Handheld Devices J¨urgen Bohn Institute a system for instant personalization and temporary ownership of mobile devices that addresses these issues of use, mobile user devices enable convenient ubiqui- tous access to personal user data in situations

  11. MuSIC: Mobility-Aware Optimal Service Allocation in Mobile Cloud Computing

    E-Print Network [OSTI]

    Venkatasubramanian, Nalini

    interpretation) - despite advances in device technology, resources (energy, storage, processing) at the mobileS goals such application delay, device power consumption and user cost/price. In this paper, we propose consumption and cost at the user side. In contrast, Wi-Fi deployments, e.g. 802.11 hotspots, exhibit low

  12. Manual authentication for wireless devices Christian Gehrmann

    E-Print Network [OSTI]

    Mitchell, Chris

    is to examine how these services might best be achieved for personal wireless-enabled devices. Using the terminology of Stajano [12], the problem is that of securely `imprinting' a personal device. That is, suppose a user has two wireless-enabled devices, e.g. a mobile phone and a Personal Digital Assistant (PDA

  13. PinBus Interface Design

    SciTech Connect (OSTI)

    Hammerstrom, Donald J.; Adgerson, Jewel D.; Sastry, Chellury; Pratt, Richard M.; Pratt, Robert G.

    2009-12-30T23:59:59.000Z

    On behalf of the U.S. Department of Energy, PNNL has explored and expanded upon a simple control interface that might have merit for the inexpensive communication of smart grid operational objectives (demand response, for example) to small electric end-use devices and appliances. The approach relies on bi-directional communication via the electrical voltage states of from one to eight shared interconnection pins. The name PinBus has been suggested and adopted for the proposed interface protocol. The protocol is defined through the presentation of state diagrams and the pins’ functional definitions. Both simulations and laboratory demonstrations are being conducted to demonstrate the elegance and power of the suggested approach. PinBus supports a very high degree of interoperability across its interfaces, allowing innumerable pairings of devices and communication protocols and supporting the practice of practically any smart grid use case.

  14. Device control at CEBAF

    SciTech Connect (OSTI)

    Schaffner, S.; Barker, D.; Bookwalter, V. [and others

    1996-08-01T23:59:59.000Z

    CEBAF has undergone a major conversion of its accelerator control system from TACL to EPICS, affecting device control for the RF system, magnets, the machine protection system, the vacuum and valves, and the diagnostic systems including beam position monitors, harps, and the camera and solenoid devices (beam viewers, faraday cups, optical transition radiation viewers, synchrotron radiation monitor, etc.). Altogether these devices require approximately 125,000 EPICS database records. The majority of these devices are controlled through CAMAC; some use embedded microprocessors (RF and magnets), and newer interfaces are in VME. The standard EPICS toolkit was extended to include a driver for CAMAC which supports dual processors on one serial highway, custom database records for magnets and BPMs, and custom data acquisition tasks for the BPMs. 2 refs., 1 tab.

  15. Interfacial Engineering for Highly Efficient-Conjugated Polymer-Based Bulk Heterojunction Photovoltaic Devices

    SciTech Connect (OSTI)

    Alex Jen; David Ginger; Christine Luscombe; Hong Ma

    2012-04-02T23:59:59.000Z

    The aim of our proposal is to apply interface engineering approach to improve charge extraction, guide active layer morphology, improve materials compatibility, and ultimately allow the fabrication of high efficiency tandem cells. Specifically, we aim at developing: i. Interfacial engineering using small molecule self-assembled monolayers ii. Nanostructure engineering in OPVs using polymer brushes iii. Development of efficient light harvesting and high mobility materials for OPVs iv. Physical characterization of the nanostructured systems using electrostatic force microscopy, and conducting atomic force microscopy v. All-solution processed organic-based tandem cells using interfacial engineering to optimize the recombination layer currents vi. Theoretical modeling of charge transport in the active semiconducting layer The material development effort is guided by advanced computer modeling and surface/ interface engineering tools to allow us to obtain better understanding of the effect of electrode modifications on OPV performance for the investigation of more elaborate device structures. The materials and devices developed within this program represent a major conceptual advancement using an integrated approach combining rational molecular design, material, interface, process, and device engineering to achieve solar cells with high efficiency, stability, and the potential to be used for large-area roll-to-roll printing. This may create significant impact in lowering manufacturing cost of polymer solar cells for promoting clean renewable energy use and preventing the side effects from using fossil fuels to impact environment.

  16. SUPERCONDUCTING DEVICES

    E-Print Network [OSTI]

    Clarke, John

    2014-01-01T23:59:59.000Z

    communications. References Superconductor Applications: ~on all aspects of superconducting devices. IEEE Trans.on all aspects vf superconducting devices. The IBM Journal

  17. SUPERCONDUCTING DEVICES

    E-Print Network [OSTI]

    Clarke, John

    2014-01-01T23:59:59.000Z

    on all aspects of superconducting devices. IEEE Trans.on all aspects vf superconducting devices. The IBM JournalJ. Matisoo, The Superconducting Computer," Scientific

  18. Novel fluctuations at constrained interfaces

    E-Print Network [OSTI]

    Abhishek Chaudhuri

    2006-01-25T23:59:59.000Z

    In this study we try to answer the qustion : What happens when explicit constraints are introduced such that the low energy, long wavelength modes of a system are unavailable ? This question has assumed some importance in recent years due to the advent of nano technology and the growing use of nanometer scale devices and structures. In a small system, the size limits the scale of the fluctuations and makes it imperative for us to understand how the response of the system is altered in such a situation. In this thesis, this question is answered for the special case of interfacial fluctuations in two dimensions (2d). The energy of an interface between two phases in equilibrium is invariant with respect to translations perpendicular to the plane (or line in 2d) of the interface. We study the consequence of breaking this symmetry explicity using an external field gradient. One expects that since low energy excitations are suppressed, the interface would be flat and inert at all times. We show that surprisingly there are novel fluctuations and phenomena associated with such constrained interfaces which have static as well as dynamic consequences. The Ising interface on a square lattice is shown to undergo a multitude of structural transitions as a function of velocity and the orientation. Liquid solid interfaces show coherent addition and removal of atomic layers providing novel mechanisms of stress relaxation in a nanosized single crystal without defects. We study momentum and energy transfer across the liquid solid interface in the presence of this ``layering'' transition.

  19. User Interfaces 1 Command Line Interfaces

    E-Print Network [OSTI]

    Verschelde, Jan

    User Interfaces 1 Command Line Interfaces getting arguments of the command line a command line 2013 1 / 39 #12;User Interfaces 1 Command Line Interfaces getting arguments of the command line a command line interface to store points fitting points with polyfit of numpy 2 Encapsulation by Object

  20. A Sonically-Enhanced Interface Toolkit Stephen A. Brewster

    E-Print Network [OSTI]

    Williamson, John

    in that an interface designer without a detailed knowledge of graphic design can create an interface using a standard device-dependent and time- consuming. This is a similar problem to that faced by graphical interface designers before graphical toolkits were available. Myers [8] suggests that the use of graphical toolkits

  1. Hadoop MapReduce for Mobile Cloud

    E-Print Network [OSTI]

    George, Johnu

    2014-04-17T23:59:59.000Z

    capabilities on clusters of commodity hardware. Building Hadoop on a mobile net- work enables the devices to run data intensive computing applications without direct knowledge of underlying distributed systems complexities. However, these applications have...

  2. Intelligent interface for design and simulation

    SciTech Connect (OSTI)

    Draisin, W.; Peter, E.

    1986-01-01T23:59:59.000Z

    We are developing a system composed of intelligent interfaces, expert systems, and databases that uses artificial intelligence techniques to simplify the use of large simulation codes and to help design complicated physical devices. The simulation codes are used in analyzing and designing weapons, and the devices are themselves parts of weapon systems. From a designer's point of view, the simulation process is the same no matter what is being simulated. In the course of developing two intelligent interfaces for the design of nuclear weapons, we have found that data-driven programming is a useful technique for implementing an open-ended user interface to assist the designer. We discuss the simulation process as it is done now and as it could be done with intelligent interfaces. We then discuss the use of data-driven programming in a database environment to support an interface for an arbitrary number of simulation codes. 3 figs.

  3. ECE 609 Semiconductor Devices Department of Electrical and Computer Engineering

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    ECE 609 ­ Semiconductor Devices Department of Electrical and Computer Engineering University of semiconductor electronic devices in terms of material properties, interface and junction characteristics). ________________________________________________________________________ Preliminary Course Outline 1. Overview of Semiconductor Physics 1.1 Semiconductor Materials

  4. Capillary zone electrophoresis-mass spectrometer interface

    DOE Patents [OSTI]

    D'Silva, Arthur (Ames, IA)

    1996-08-06T23:59:59.000Z

    A device for providing equal electrical potential between two loci unconnected by solid or liquid electrical conducts is provided. The device comprises a first electrical conducting terminal, a second electrical conducting terminal connected to the first terminal by a rigid dielectric structure, and an electrically conducting gas contacting the first and second terminals. This device is particularly suitable for application in the electrospray ionization interface between a capillary zone electrophoresis apparatus and a mass spectrometer.

  5. Capillary zone electrophoresis-mass spectrometer interface

    DOE Patents [OSTI]

    D`Silva, A.

    1996-08-06T23:59:59.000Z

    A device for providing equal electrical potential between two loci unconnected by solid or liquid electrical conductors is provided. The device comprises a first electrical conducting terminal, a second electrical conducting terminal connected to the first terminal by a rigid dielectric structure, and an electrically conducting gas contacting the first and second terminals. This device is particularly suitable for application in the electrospray ionization interface between a capillary zone electrophoresis apparatus and a mass spectrometer. 1 fig.

  6. Mobile Device Management iOS Device Enrollment

    E-Print Network [OSTI]

    Setup Instructions 2. Get the App from the Apple App Store a. Launch the App Store. b. Search for Citrix Enroll. #12;c. Enter your LSUHSC email address. d. Tap Next. e. Enter your LSUHSC password. f. Tap Next. g. Accept the Terms and Conditions. 4. Tap 1 - Install Company Profile. #12;a. Tap Install. b. Tap

  7. Beamforming on mobile devices: A first study

    E-Print Network [OSTI]

    #12;N=2 N=4 0 3 6 Beamforminggain(dB) Indoor Max Static 90d/s 180d/s CSI estimation every 100 ms Rotation? #12;N=2 N=4 0 3 6 Beamforminggain(dB) Indoor Max Static 90d/s 180d/s CSI estimation every 10 ms Rotation! #12;Power? (uplink only) 19 Frequency Synthesizer Baseband Signal DAC Filter Mixer Filter PA1

  8. Piezo-phototronic effect devices

    DOE Patents [OSTI]

    Wang, Zhong L.; Yang, Qing

    2013-09-10T23:59:59.000Z

    A semiconducting device includes a piezoelectric structure that has a first end and an opposite second end. A first conductor is in electrical communication with the first end and a second conductor is in electrical communication with the second end so as to form an interface therebetween. A force applying structure is configured to maintain an amount of strain in the piezoelectric member sufficient to generate a desired electrical characteristic in the semiconducting device.

  9. Modeling, Characterizing, and Enhancing User Experience in Cloud Mobile Rendering

    E-Print Network [OSTI]

    California at San Diego, University of

    Modeling, Characterizing, and Enhancing User Experience in Cloud Mobile Rendering Yao Liu, Shaoxuan of California, San Diego {yal019, shaoxuan, dey}@ece.ucsd.edu Abstract--Cloud Mobile Rendering (CMR), where compute intensive rendering is performed on cloud servers instead of on mobile devices, can be a promising

  10. TR-IIS-11-004 An Integrated Network Mobility

    E-Print Network [OSTI]

    Chen, Sheng-Wei

    TR-IIS-11-004 An Integrated Network Mobility Management and Call Admission Control Scheme/tr11.html #12;An Integrated Network Mobility Management and Call Admission Control Scheme improvements however, are clashing with similarly impressive achievements in smart mobile device technology

  11. Mobile Alternative Fueling Station Locator

    SciTech Connect (OSTI)

    Not Available

    2009-04-01T23:59:59.000Z

    The Department of Energy's Alternative Fueling Station Locator is available on-the-go via cell phones, BlackBerrys, or other personal handheld devices. The mobile locator allows users to find the five closest biodiesel, electricity, E85, hydrogen, natural gas, and propane fueling sites using Google technology.

  12. Daydreaming Devices

    E-Print Network [OSTI]

    Da Ponte, Ana Sofia Lopes

    2008-01-01T23:59:59.000Z

    Daydreaming Devices is a project on aspects of daydream and the design of convertible furniture within the context of art. This thesis addresses the concepts and the design of two daydreaming devices developed during my ...

  13. Intermixing at the absorber-buffer layer interface in thin-film solar cells: The electronic effects of point defects in Cu(In,Ga)(Se,S){sub 2} and Cu{sub 2}ZnSn(Se,S){sub 4} devices

    SciTech Connect (OSTI)

    Varley, J. B.; Lordi, V. [Lawrence Livermore National Laboratory, Livermore, California 94550 (United States)

    2014-08-14T23:59:59.000Z

    We investigate point defects in the buffer layers CdS and ZnS that may arise from intermixing with Cu(In,Ga)(S,Se){sub 2} (CIGS) or Cu{sub 2}ZnSn(S,Se){sub 4} (CZTS) absorber layers in thin-film photovoltaics. Using hybrid functional calculations, we characterize the electrical and optical behavior of Cu, In, Ga, Se, Sn, Zn, Na, and K impurities in the buffer. We find that In and Ga substituted on the cation site act as shallow donors in CdS and tend to enhance the prevailing n-type conductivity at the interface facilitated by Cd incorporation in CIGS, whereas they are deep donors in ZnS and will be less effective dopants. Substitutional In and Ga can favorably form complexes with cation vacancies (A-centers) which may contribute to the “red kink” effect observed in some CIGS-based devices. For CZTS absorbers, we find that Zn and Sn defects substituting on the buffer cation site are electrically inactive in n-type buffers and will not supplement the donor doping at the interface as in CIGS/CdS or ZnS devices. Sn may also preferentially incorporate on the S site as a deep acceptor in n-type ZnS, which suggests possible concerns with absorber-related interfacial compensation in CZTS devices with ZnS-derived buffers. Cu, Na, and K impurities are found to all have the same qualitative behavior, most favorably acting as compensating acceptors when substituting on the cation site. Our results suggest one beneficial role of K and Na incorporation in CIGS or CZTS devices is the partial passivation of vacancy-related centers in CdS and ZnS buffers, rendering them less effective interfacial hole traps and recombination centers.

  14. Physical Media Independence: System Support for Dynamically Available Network Interfaces

    E-Print Network [OSTI]

    Walpole, Jonathan

    (PMI) is the concept of making assumptions about a particular device explicit, detecting events which PMI. Based on device availability, the model iden- ti es implicit device-related assumptions made the Interface Man- agement Module (IMM), that supports PMI in the FreeBSD operating system. The bene ts

  15. High-temperature molecular beam epitaxial growth of AlGaN/GaN on GaN templates with reduced interface impurity levels

    SciTech Connect (OSTI)

    Koblmueller, G. [Department of Materials, University of California, Santa Barbara, California 93106 (United States); Walter Schottky Institut, Technische Universitaet Muenchen, D-85748 Garching (Germany); Chu, R. M.; Raman, A.; Mishra, U. K. [Department of Electrical and Computer Engineering, University of California, Santa Barbara, California 93106 (United States); Speck, J. S. [Department of Materials, University of California, Santa Barbara, California 93106 (United States)

    2010-02-15T23:59:59.000Z

    We present combined in situ thermal cleaning and intentional doping strategies near the substrate regrowth interface to produce high-quality AlGaN/GaN high electron mobility transistors on semi-insulating (0001) GaN templates with low interfacial impurity concentrations and low buffer leakage. By exposing the GaN templates to an optimized thermal dissociation step in the plasma-assisted molecular beam epitaxy environment, oxygen, carbon, and, to lesser extent, Si impurities were effectively removed from the regrowth interface under preservation of good interface quality. Residual Si was further compensated by C-doped GaN via CBr{sub 4} to yield highly resistive GaN buffer layers. Improved N-rich growth conditions at high growth temperatures were then utilized for subsequent growth of the AlGaN/GaN device structure, yielding smooth surface morphologies and low residual oxygen concentration with large insensitivity to the (Al+Ga)N flux ratio. Room temperature electron mobilities of the two-dimensional electron gas at the AlGaN/GaN interface exceeded >1750 cm{sup 2}/V s and the dc drain current reached {approx}1.1 A/mm at a +1 V bias, demonstrating the effectiveness of the applied methods.

  16. Mobile cinema

    E-Print Network [OSTI]

    Pan, Pengkai, 1972-

    2004-01-01T23:59:59.000Z

    This thesis develops techniques and methods that extend the art and craft of storytelling, and in particular enable the creation of mobile cinema. Stories are always constrained by the medium in which they are told and the ...

  17. Advanced structure-borne sound Wave mobilities

    E-Print Network [OSTI]

    Berlin,Technische Universität

    ^p e j(v -p ) · Wave mobilities © Prof. B.A.T. Petersson Advanced structure-borne sound · Decomposed1 Advanced structure-borne sound p(kx) v(kx) v = p Y = ^ve- jkx x ejv ^pe- jkx x e jp = ^v ^p = ^v;2 Advanced structure-borne sound · Interface mobilities s C kp = 2p C kq = 2q C ; p = 0 ±1 ±2 ±3... ; q = 0

  18. Mobile RFID Security Issues -ICU 1 SCIS 2006: The 2006 Symposium on Cryptography and Information Security

    E-Print Network [OSTI]

    Kim, Kwangjo

    #12;Mobile RFID Security Issues - ICU 2 RFID Technology (1/2) Radio Frequency Identification (RFID Issues - ICU 5 Mobile RFID Technology (1/2) RFID readers would become ubiquitous Get easy and quick Mobile RFID Technology (2/2) A mobile phone or any portable device Also behaves as RFID reader

  19. Mobile Journey Planning for Bus Passengers Desmond Rainsford and William A Mackaness

    E-Print Network [OSTI]

    . Developments in mobile technology offer new ways of supporting mobile decision making. One application domain1 Mobile Journey Planning for Bus Passengers Desmond Rainsford and William A Mackaness Geography in the area of Location Based Services (LBS) is the delivery of journey plans to a mobile device. Few journey

  20. Sealing device

    SciTech Connect (OSTI)

    Garcia-Crespo, Andres Jose

    2013-12-10T23:59:59.000Z

    A sealing device for sealing a gap between a dovetail of a bucket assembly and a rotor wheel is disclosed. The sealing device includes a cover plate configured to cover the gap and a retention member protruding from the cover plate and configured to engage the dovetail. The sealing device provides a seal against the gap when the bucket assemply is subjected to a centrifugal force.

  1. A Personal Mobile DRM Manager for Smart-Phones Siddharth Bhatt

    E-Print Network [OSTI]

    Carbunar, Bogdan

    by a service. Here we present a personal digital rights system for mobile devices where the end user has each other and exchange credentials. The personal DRM system on each device safely enforces the content of interconnected personal devices, the modern mobile customer experience has become increasingly compelling

  2. Nanoscale Josephson Devices

    E-Print Network [OSTI]

    Bell, Chris

    , ferromagnetically (aligned ferromagnetic layers) FIB Focused Ion Beam GL Ginzburg-Landau GPIB General Purpose Interface Bus GMR Giant Magnetoresistance HTS High Temperature Superconductor I Insulator LED Light Emitting Diode LTS Low Temperature Superconductor MR... . The fabrication of intrinsic Josephson junctions in the high temperature superconductor Tl2Ba2CaCu2O8 will then be discussed, as well as Nb/MoSi2/Nb junctions, superconducting quantum interference devices, and finally GaN light emitting diodes. The work on Tl2Ba2...

  3. Mobile Media Poetics

    E-Print Network [OSTI]

    Raley, Rita

    2009-01-01T23:59:59.000Z

    Cell Phone Culture: Mobile Technology in Everyday Life.as well as mobile communication technologies. In turn, wefor distribution via mobile communication technologies. Such

  4. Anchored Mobilities: Mobile Technology and Transnational Migration

    E-Print Network [OSTI]

    Dourish,Paul

    Anchored Mobilities: Mobile Technology and Transnational Migration Amanda Williams Donald Bren Irvine, CA 92697-3440, USA jpd@ics.uci.edu ABSTRACT Mobile technologies are deployed into diverse social mobility. We present an ethnography of transnational Thai retirees and their uses of mobile technology

  5. Service Provision in Disconnected Mobile Ad hoc Networks Nicolas Le Sommer

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Service Provision in Disconnected Mobile Ad hoc Networks Nicolas Le Sommer Valoria Laboratory, University of South Brittany Nicolas.Le-Sommer@univ-ubs.fr Abstract With the proliferation of mobiles devices

  6. Planar array design and analysis on direction of arrival estimation for mobile communication systems 

    E-Print Network [OSTI]

    Sanudin, Rahmat

    2014-06-30T23:59:59.000Z

    The demand of wireless communication has increased significantly in the past few decades due to huge demand to deliver multimedia content instantly. The expansion of mobile content paired with affordable mobile devices ...

  7. Experimental evaluation of read performance for RFID-based mobile sensor data gathering applications 

    E-Print Network [OSTI]

    Currie, Iain A.; Marina, Mahesh

    We consider RFID-based sensing applications enabled by passive or semi-passive tags and mobile devices equipped with readers. We experimentally investigate the feasibility of such RFID-based mobile sensor data gathering applications, focusing on UHF...

  8. Electrochromic devices

    DOE Patents [OSTI]

    Allemand, Pierre M. (Tucson, AZ); Grimes, Randall F. (Ann Arbor, MI); Ingle, Andrew R. (Tucson, AZ); Cronin, John P. (Tucson, AZ); Kennedy, Steve R. (Tuscon, AZ); Agrawal, Anoop (Tucson, AZ); Boulton, Jonathan M. (Tucson, AZ)

    2001-01-01T23:59:59.000Z

    An electrochromic device is disclosed having a selective ion transport layer which separates an electrochemically active material from an electrolyte containing a redox active material. The devices are particularly useful as large area architectural and automotive glazings due to there reduced back reaction.

  9. Web Service Interface (API)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    OSCARS and Future Tech OSCARS Standard and Open Grid Forum OSCARS Developers Community Web Browser Interface (WBUI) Web Service Interface (API) Read More... Fasterdata IPv6...

  10. Web Browser Interface (WBUI)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    OSCARS and Future Tech OSCARS Standard and Open Grid Forum OSCARS Developers Community Web Browser Interface (WBUI) Web Service Interface (API) Read More... Fasterdata IPv6...

  11. Selecting and Applying Interfacings

    E-Print Network [OSTI]

    2006-05-01T23:59:59.000Z

    Selecting and using interfacing correctly is an important component of garment construction. The various types of interfacing are described and methods of applying them are discussed in detail....

  12. Interface modified thermally stable hole transporting layer for efficient organic light emitting diodes

    SciTech Connect (OSTI)

    Grover, Rakhi, E-mail: grover.rakhi@gmail.com [Amity Institute of Advanced Research and Studies (Materials and Devices), Amity University, Noida, Uttar Pradesh 201303 (India); Srivastava, Ritu, E-mail: ritu@mail.nplindia.org; Dagar, Janardan; Kamalasanan, M. N. [Physics of Energy Harvesting Division, CSIR-National Physical Laboratory, CSIR-Network of Institute for Solar Energy (NISE), Dr. K.S. Krishnan Road, New Delhi 110012 (India); Mehta, D. S. [Department of Physics, Indian Institute of Technology Delhi, Hauz Khas, New Delhi 110016 (India)

    2014-08-14T23:59:59.000Z

    Electrical transport in thermally stable 2, 7-bis [N, N-bis (4-methoxy-phenyl) amino]-9, 9-spirobifluorene (MeO-Spiro-TPD) thin films has been investigated as a function of temperature and organic layer thickness. ITO/MeO-Spiro-TPD interface was found to be injection limited and has been studied in detail to find barrier height for hole injection. The thickness of tetra-fluoro-tetracyano-quinodimethane thin films were optimized to be used as hole injection buffer layer which resulted in switching of charge transport mechanism from injection limited to space charge limited conduction above a critical thickness of 3?nm. Hole mobility has been measured using transient space charge limited conduction (SCLC), field dependent SCLC, and top contact transistor characteristics. The charge carrier transport in interface modified hole only devices was analysed using Gaussian disorder model. The thermal stability of MeO-Spiro-TPD has been investigated by atomic force microscopy and X-ray diffraction studies. The study indicates a thermally stable and highly efficient hole transport material for application in organic semiconductor based devices.

  13. A Cooperative Approach to User Mobility Robin Kravets

    E-Print Network [OSTI]

    Kravets, Robin

    of personal devices as a MOPED, an autonomous set of MObile grouPEd De- vices, which appears as a single for the MOPED. These personal devices can cooperate to achieve better resource utilization, such as by sharing, to the user. As a user acquires multiple personal technology and communica- tion devices, the efficiency

  14. A Cooperative Approach to User Mobility Robin Kravets

    E-Print Network [OSTI]

    Kravets, Robin

    of personal devices as a MOPED, an autonomous set of MObile grouPEd De­ vices, which appears as a single for the MOPED. These personal devices can cooperate to achieve better resource utilization, such as by sharing, to the user. As a user acquires multiple personal technology and communica­ tion devices, the efficiency

  15. Eyo: Device-Transparent Personal Storage Jacob Strauss

    E-Print Network [OSTI]

    Gummadi, Ramakrishna

    Eyo: Device-Transparent Personal Storage Jacob Strauss Justin Mazzola Paluska Chris Lesniewski on multiple personal devices, each of which typically offers a storage management interface oblivious. This paper presents Eyo, a novel personal storage sys- tem that provides device transparency: a user can

  16. Device-Transparent Personal Storage Jacob Alo Strauss

    E-Print Network [OSTI]

    Gummadi, Ramakrishna

    Device-Transparent Personal Storage by Jacob Alo Strauss S.B., Massachusetts Institute personal devices, each of which typically presents the user with a storage management interface isolated and drift out of sync. This thesis presents Eyo, a novel personal storage system that provides device trans

  17. Circuits & Systems Test Circuits for Characterization of Process, Device, and Interconnect Variation ................................................................................. CS.1

    E-Print Network [OSTI]

    Reif, Rafael

    Circuits & Systems Test Circuits for Characterization of Process, Device, and Interconnect................................................................................................. CS.2 45nm Direct-battery DC-DC Converter for Mobile Applications

  18. Device Performance

    SciTech Connect (OSTI)

    Not Available

    2006-06-01T23:59:59.000Z

    In the Device Performance group, within the National Center for Photovoltaic's Measurements and Characterization Division, we measure the performance of PV cells and modules with respect to standard reporting conditions--defined as a reference temperature (25 C), total irradiance (1000 Wm-2), and spectral irradiance distribution (IEC standard 60904-3). Typically, these are ''global'' reference conditions, but we can measure with respect to any reference set. To determine device performance, we conduct two general categories of measurements: spectral responsivity (SR) and current versus voltage (I-V). We usually perform these measurements using standard procedures, but we develop new procedures when required by new technologies. We also serve as an independent facility for verifying device performance for the entire PV community. We help the PV community solve its special measurement problems, giving advice on solar simulation, instrumentation for I-V measurements, reference cells, measurement procedures, and anomalous results. And we collaborate with researchers to analyze devices and materials.

  19. Web Interface Call Simulator

    E-Print Network [OSTI]

    Ernst, Damien

    Web Interface Call Simulator Stage Description Web Interface for VoIP Call Simulator Net) Version 1.0 ­ 3/09/2012 Page 1 of 6 #12;Web Interface Call Simulator Version 1.0 ­ 3/09/2012 Page 2 of 6 #12;Web Interface Call Simulator Document Control Version Date Notes 1.0 25/8/2012 Reviewed

  20. Ghosts in the Machine: Interfaces for Better Power Management

    E-Print Network [OSTI]

    Flinn, Jason

    Ghosts in the Machine: Interfaces for Better Power Management Manish Anand, Edmund B. Nightingale observe that the modularity of current power manage­ ment algorithms often leads to poor results. We propose two new interfaces that pierce the abstraction barrier that in­ hibits device power management

  1. Ghosts in the Machine: Interfaces for Better Power Management

    E-Print Network [OSTI]

    Eustice, Ryan

    Ghosts in the Machine: Interfaces for Better Power Management Manish Anand, Edmund B. Nightingale observe that the modularity of current power manage- ment algorithms often leads to poor results. We propose two new interfaces that pierce the abstraction barrier that in- hibits device power management

  2. Water Dynamics at Rough Interfaces

    E-Print Network [OSTI]

    Markus Rosenstihl; Kerstin Kämpf; Felix Klameth; Matthias Sattig; Michael Vogel

    2014-07-21T23:59:59.000Z

    We use molecular dynamics computer simulations and nuclear magnetic resonance experiments to investigate the dynamics of water at interfaces of molecular roughness and low mobility. We find that, when approaching such interfaces, the structural relaxation of water, i.e., the $\\alpha$ process, slows down even when specific attractive interactions are absent. This prominent effect is accompanied by a smooth transition from Vogel to Arrhenius temperature dependence and by a growing importance of jump events. Consistently, at protein surfaces, deviations from Arrhenius behavior are weak when free water does not exist. Furthermore, in nanoporous silica, a dynamic crossover of liquid water occurs when a fraction of solid water forms near 225 K and, hence, the liquid dynamics changes from bulk-like to interface-dominated. At sufficiently low temperatures, water exhibits a quasi-universal $\\beta$ process, which is characterized by an activation energy of $E_a\\!=\\!0.5$ eV and involves anisotropic reorientation about large angles. As a consequence of its large amplitude, the faster $\\beta$ process destroys essentially all orientational correlation, rendering observation of a possible slower $\\alpha$ process difficult in standard experiments. Nevertheless, we find indications for the existence of structural relaxation down to a glass transition of interfacial water near 185 K. Hydrated proteins show a highly restricted backbone motion with an amplitude, which decreases upon cooling and vanishes at comparable temperatures, providing evidence for a high relevance of water rearrangements in the hydration shell for secondary protein relaxations.

  3. School of Electronic, Electrical and Computer Engineering Smart electronics, smart devices,

    E-Print Network [OSTI]

    Miall, Chris

    School of Electronic, Electrical and Computer Engineering Smart electronics, smart devices, smart applications of video game engines and mobile devices. Electronic, Electrical and Computer Engineering networks... smart people. Tim Collins, Head of Learning and Teaching School of Electronic, Electrical

  4. Generic device controller for accelerator control systems

    SciTech Connect (OSTI)

    Mariotti, R.; Buxton, W.; Frankel, R.; Hoff, L.

    1987-01-01T23:59:59.000Z

    A new distributed intelligence control system has become operational at the AGS for transport, injection, and acceleration of heavy ions. A brief description of the functionality of the physical devices making up the system is given. An attempt has been made to integrate the devices for accelerator specific interfacing into a standard microprocessor system, namely, the Universal Device Controller (UDC). The main goals for such a generic device controller are to provide: local computing power; flexibility to configure; and real time event handling. The UDC assemblies and software are described. (LEW)

  5. June 27, 2003 Visualization Techniques for Personal Tasks on Mobile Computers Page 1 Visualization Techniques for Personal

    E-Print Network [OSTI]

    Tominski, Christian

    on mobile devices #12;June 27, 2003 Visualization Techniques for Personal Tasks on Mobile Computers Page 4June 27, 2003 Visualization Techniques for Personal Tasks on Mobile Computers Page 1 Visualization Techniques for Personal Tasks on Mobile Computers Gerald Bieber Fraunhofer Institute for Computer Graphics

  6. A session-based architecture for Internet mobility

    E-Print Network [OSTI]

    Snoeren, Mark Alexander Connell, 1975-

    2003-01-01T23:59:59.000Z

    The proliferation of mobile computing devices and wireless networking products over the past decade has led to an increasingly nomadic computing lifestyle. A computer is no longer an immobile, gargantuan machine that remains ...

  7. Multijunction photovoltaic device and fabrication method

    DOE Patents [OSTI]

    Arya, Rajeewa R. (Jamison, PA); Catalano, Anthony W. (Furlong, PA)

    1993-09-21T23:59:59.000Z

    A multijunction photovoltaic device includes first and second amorphous silicon PIN photovoltaic cells in a stacked arrangement. An interface layer, composed of a doped silicon compound, is disposed between the two cells and has a lower bandgap than the respective n- and p-type adjacent layers of the first and second cells. The interface layer forms an ohmic contact with the one or the adjacent cell layers of the same conductivity type, and a tunnel junction with the other of the adjacent cell layers. The disclosed device is fabricated by a glow discharge process.

  8. Electrochemical device

    DOE Patents [OSTI]

    Grimes, Patrick G. (Westfield, NJ); Einstein, Harry (Springfield, NJ); Bellows, Richard J. (Westfield, NJ)

    1988-01-12T23:59:59.000Z

    A tunnel protected electrochemical device features channels fluidically communicating between manifold, tunnels and cells. The channels are designed to provide the most efficient use of auxiliary power. The channels have a greater hydraulic pressure drop and electrical resistance than the manifold. This will provide a design with the optimum auxiliary energy requirements.

  9. Detection device

    DOE Patents [OSTI]

    Smith, J.E.

    1981-02-27T23:59:59.000Z

    The present invention is directed to a detection device comprising: (1) an entrance chamber; (2) a central chamber; and (3) an exit chamber. The central chamber includes an ionizing gas, anode, and means for connecting the anode with an external power supply and pulse counter.

  10. Gradual Engagement: Facilitating Information Exchange between Digital Devices as a Function of Proximity

    E-Print Network [OSTI]

    Greenberg, Saul

    stages. We explore how techniques differ between personal and semi-public devices, and how the pattern; awareness; proxemic interactions; handhelds; interactive surfaces INTRODUCTION Personal mobile devices (e. That is, as people move and orient their personal device towards other surrounding devices [11

  11. Mobile Resources

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated Codes |IsLove Your1 SECTION A. Revised:7,AMission MissionMistakesMoMobile

  12. The Cricket Compass for ContextAware Mobile Applications

    E-Print Network [OSTI]

    The Cricket Compass for Context­Aware Mobile Applications Nissanka B. Priyantha, Allen K. L. Miu compass, knowledge of orientation through the Cricket com- pass attached to a mobile device enhances, and \\augmented-reality" displays. Our compass infrastructure enhances the spatial inference capability

  13. Power Control for Mobile Sensor Networks: An Experimental Approach

    E-Print Network [OSTI]

    Amir, Yair

    Power Control for Mobile Sensor Networks: An Experimental Approach JeongGil Ko Department--Techniques for controlling the transmission power of wireless mobile devices have been widely studied in ad-hoc and cellular characteristics of these networks, such as severe resource constraints, suggest that transmission power control

  14. Eye-Gaze Interaction for Mobile Phones Heiko Drewes

    E-Print Network [OSTI]

    Eye-Gaze Interaction for Mobile Phones Heiko Drewes Media Informatics Group Amalienstr. 17, 80333 the use of eye-gaze tracking technology for mobile phones. In particular we investigate how gaze interaction can be used to control applications on handheld devices. In contrast to eye-tracking systems

  15. NONLINEAR OPTICS AT INTERFACES

    E-Print Network [OSTI]

    Chen, Chenson K.

    2010-01-01T23:59:59.000Z

    N. Bloembergen, Nonlinear Optics (W. A. Benjamin, 1977) p.Research Division NONLINEAR OPTICS AT INTERFACES Chenson K.ED LBL-12084 NONLINEAR OPTICS AT INTERFACES Chenson K. Chen

  16. Cooperating mobile robots

    DOE Patents [OSTI]

    Harrington, John J.; Eskridge, Steven E.; Hurtado, John E.; Byrne, Raymond H.

    2004-02-03T23:59:59.000Z

    A miniature mobile robot provides a relatively inexpensive mobile robot. A mobile robot for searching an area provides a way for multiple mobile robots in cooperating teams. A robotic system with a team of mobile robots communicating information among each other provides a way to locate a source in cooperation. A mobile robot with a sensor, a communication system, and a processor, provides a way to execute a strategy for searching an area.

  17. A Nested Two Stage Game-Based Optimization Framework in Mobile Cloud Computing System

    E-Print Network [OSTI]

    Pedram, Massoud

    and virtualization techniques provide mobile devices with battery energy saving opportunities by allowing them on the backward induction principle, we derive the optimal or near-optimal strategy for all the mobile devices by the profits by charging clients for accessing these services. Clients are attracted by the opportunity

  18. CARISMA: Context-Aware Reflective mIddleware System for Mobile Applications

    E-Print Network [OSTI]

    Mascolo, Cecilia

    Emmerich and Cecilia Mascolo Abstract-- Mobile devices, such as mobile phones and personal digital of battery power or reachability of services on other devices. This would L. Capra, W. Emmerich and C.capra w.emmerich c.mascolo @cs.ucl.ac.uk. require application engineers, for example, to periodically

  19. Virtual Shelves: Interactions with Orientation Aware Devices Frank Chun Yat Li, David Dearman & Khai N. Truong

    E-Print Network [OSTI]

    Toronto, University of

    Virtual Shelves: Interactions with Orientation Aware Devices Frank Chun Yat Li, David Dearman mobile situations when eyes-free interactions may be preferable. We present Virtual Shelves, a technique. With Virtual Shelves, the user triggers shortcuts by orienting a spatially-aware mobile device within

  20. Temporal Quality Assessment for Mobile Videos An (Jack) Chan, Amit Pande, Eilwoo Baik and Prasant Mohapatra

    E-Print Network [OSTI]

    California at Davis, University of

    for more than 50% of the total traffic in mobile networks [4]. Quality of Experi- ence (QoE) of watchingTemporal Quality Assessment for Mobile Videos An (Jack) Chan, Amit Pande, Eilwoo Baik and Prasant}@ucdavis.edu ABSTRACT Video quality assessment in mobile devices, for instances smart phones and tablets, raises unique

  1. Controlling the Mobility of Multiple Data Transport Ferries in a Delay-Tolerant Network

    E-Print Network [OSTI]

    Schindelhauer, Christian

    such that energy consumption in communication is minimized. In the NIMS project [18], Kaiser et al. propose the use or aerial vehicles may provide the required mobility for the carried devices. With mobility capability of infrastructure-supported mobility in sensor networks for autonomous operations and physical reconfiguration

  2. MobiSN: Semantics-based Mobile Ad Hoc Social Network Framework

    E-Print Network [OSTI]

    Li, Juan "Jen"

    MobiSN: Semantics-based Mobile Ad Hoc Social Network Framework Juan Li Department of Computer.khan@ndsu.edu Abstract--Mobile ad hoc social networks are self-configuring social networks that connect users using mobile devices, such as laptops, PDAs, and cellular phones. These social networks facilitate users

  3. Measuring the Client Performance and Energy Consumption in Mobile Cloud Gaming

    E-Print Network [OSTI]

    Chen, Sheng-Wei

    Measuring the Client Performance and Energy Consumption in Mobile Cloud Gaming Chun-Ying Huang1, Po-constrained devices may lead to inferior performance and high energy consumption. For example, the gaming frame rate and energy consumption of mobile clients is critical to the success of the new mobile cloud gaming ecosystem

  4. Optoelectronic devices utilizing materials having enhanced electronic transitions

    DOE Patents [OSTI]

    Black, Marcie R. (Newton, MA)

    2011-02-22T23:59:59.000Z

    An optoelectronic device that includes a material having enhanced electronic transitions. The electronic transitions are enhanced by mixing electronic states at an interface. The interface may be formed by a nano-well, a nano-dot, or a nano-wire.

  5. Optoelectronic devices utilizing materials having enhanced electronic transitions

    DOE Patents [OSTI]

    Black, Marcie R.

    2013-04-09T23:59:59.000Z

    An optoelectronic device that includes a material having enhanced electronic transitions. The electronic transitions are enhanced by mixing electronic states at an interface. The interface may be formed by a nano-well, a nano-dot, or a nano-wire.

  6. A Scenario-Based Mobile Application for Robot-Assisted Smart Digital Homes

    E-Print Network [OSTI]

    Manashty, Ali Reza; Jahromi, Zahra Forootan

    2010-01-01T23:59:59.000Z

    Smart homes are becoming more popular, as every day a new home appliance can be digitally controlled. Smart Digital Homes are using a server to make interaction with all the possible devices in one place, on a computer or webpage. In this paper we designed and implemented a mobile application using Windows Mobile platform that can connect to the controlling server of a Smart Home and grants the access to the Smart Home devices and robots everywhere possible. UML diagrams are presented to illustrate the application design process. Robots are also considered as devices that are able to interact to other object and devices. Scenarios are defined as a set of sequential actions to help manage different tasks all in one place. The mobile application can connect to the server using GPRS mobile internet and Short Message System (SMS). Interactive home map is also designed for easier status-checking and interacting with the devices using the mobile phones.

  7. Diversionary device

    DOE Patents [OSTI]

    Grubelich, Mark C. (Albuquerque, NM)

    2001-01-01T23:59:59.000Z

    A diversionary device has a housing having at least one opening and containing a non-explosive propellant and a quantity of fine powder packed within the housing, with the powder being located between the propellant and the opening. When the propellant is activated, it has sufficient energy to propel the powder through the opening to produce a cloud of powder outside the housing. An igniter is also provided for igniting the cloud of powder to create a diversionary flash and bang, but at a low enough pressure to avoid injuring nearby people.

  8. OLED devices

    DOE Patents [OSTI]

    Sapochak, Linda Susan [Arlington, VA; Burrows, Paul Edward [Kennewick, WA; Bimalchandra, Asanga [Richland, WA

    2011-02-22T23:59:59.000Z

    An OLED device having an emission layer formed of an ambipolar phosphine oxide host material and a dopant, a hole transport layer in electrical communication with an anode, an electron transport layer in communication with a cathode, wherein the HOMO energy of the hole transport layer is substantially the same as the HOMO energy of the ambipolar host in the emission layer, and the LUMO energy of the electron transport layer is substantially the same as the LUMO energy of the ambipolar host in the emission layer.

  9. Electrochromic device

    SciTech Connect (OSTI)

    Schwendemanm, Irina G. (Wexford, PA); Polcyn, Adam D. (Pittsburgh, PA); Finley, James J. (Pittsburgh, PA); Boykin, Cheri M. (Kingsport, TN); Knowles, Julianna M. (Apollo, PA)

    2011-03-15T23:59:59.000Z

    An electrochromic device includes a first substrate spaced from a second substrate. A first conductive member is formed over at least a portion of the first substrate. A first electrochromic material is formed over at least a portion of the first conductive member. The first electrochromic material includes an organic material. A second conductive member is formed over at least a portion of the second substrate. A second electrochromic material is formed over at least a portion of the second conductive member. The second electrochromic material includes an inorganic material. An ionic liquid is positioned between the first electrochromic material and the second electrochromic material.

  10. Impact of SiC Devices on Hybrid Electric and Plug-in Hybrid Electric Vehicles

    E-Print Network [OSTI]

    Tolbert, Leon M.

    of battery bank can be reduced for optimum design. Keywords -- Silicon carbide (SiC), inverter, hybrid -- The application of SiC devices (as battery interface, motor controller, etc.) in a hybrid electric vehicle (HEV has rapidly expanded. The application of SiC devices (as battery interface, motor controller, etc

  11. How Mobility Increases Mobile Cloud Computing Processing Capacity

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    How Mobility Increases Mobile Cloud Computing Processing Capacity Anh-Dung Nguyen, Patrick S--In this paper, we address a important and still unanswered question in mobile cloud computing "how mobility the resilience of mobile cloud computing services. Keywords--Mobile cloud computing, mobility, quality of service

  12. PUBLISHED ONLINE: 15 MAY 2011 | DOI: 10.1038/NMAT3026 Tailoring organic heterojunction interfaces in

    E-Print Network [OSTI]

    Weeks, Eric R.

    the performance of organic photovoltaic devices. T he interfacial properties of organic semiconducting materials interfaces in bilayer polymer photovoltaic devices Akira Tada1 , Yanfang Geng1,2 , Qingshuo Wei3 , Kazuhito moment. Using this method, we fabricated bilayer organic photovoltaic devices with interfacial dipole

  13. Computational Modeling of Electrolyte/Cathode Interfaces in Proton Exchange Membrane Fuel Cells

    E-Print Network [OSTI]

    Bjřrnstad, Ottar Nordal

    Computational Modeling of Electrolyte/Cathode Interfaces in Proton Exchange Membrane Fuel Cells Dr Proton exchange membrane fuel cells (PEMFCs) are alternative energy conversion devices that efficiently. The fundamental relationship between operating conditions and device performance will help to optimize the device

  14. VMS software for the Jorway-411 interface

    SciTech Connect (OSTI)

    Dorries, T.; Moore, C.; Pordes, R.; White, V.

    1987-05-01T23:59:59.000Z

    This report describes a Software Package used to access CAMAC through the Jorway-411 Interface, for use on VAX/VMS systems. The software can be used to access parallel and/or serial CAMAC branch highways, and multiple Jorways may be connected to the VAX UNIBUS or MicroVax QBUS. The software available includes a VAX/VMS device driver for the JORWAY-411 and support routines and programs that access the driver. The software is accompanied by extensive documentation.

  15. Combined electrophoresis-electrospray interface and method

    DOE Patents [OSTI]

    Smith, R.D.; Udseth, H.R.; Barinaga, C.J.

    1995-06-13T23:59:59.000Z

    An improvement to the system and method is disclosed for analyzing molecular constituents of a composition sample that comprises improvements to an electrospray ionization source for interfacing to mass spectrometers and other detection devices. The improvement consists of establishing a unique electrical circuit pattern and nozzle configuration, a metallic coated and conical shaped capillary outlet, coupled with sizing of the capillary to obtain maximum sensitivity. 10 figs.

  16. Total dose radiation response of plasma-damaged NMOS devices

    SciTech Connect (OSTI)

    Yue, J.; Lo, E.; Flanery, M. [Honeywell Solid-State Electronic Center, Plymouth, MN (United States)] [Honeywell Solid-State Electronic Center, Plymouth, MN (United States)

    1997-11-01T23:59:59.000Z

    Plasma-damaged NMOS devices were subjected to the X-ray total dose irradiation. Unlike the traditional hot-carrier or Fowler-Nordheim (F-N) stress where the hole trap generation is less pronounced, this study shows enhanced hole trap and interface trap generation on plasma-damaged devices after total dose irradiation.

  17. Description Sound Devices USBPre is a complete, portable hardware

    E-Print Network [OSTI]

    Description Sound Devices USBPre is a complete, portable hardware interface for PC and Mac audio electronics, and S/PDIF digital sources with personal computers. Its high-performance, 24-bit 9.x and Windows. SOUND DEVICES #12;Specifications Frequency Response: (reference 1 kHz) 10 Hz - 20 k

  18. Optoelectronic device

    DOE Patents [OSTI]

    Bonekamp, Jeffrey E.; Boven, Michelle L.; Gaston, Ryan S.

    2014-09-09T23:59:59.000Z

    The invention is an optoelectronic device comprising an active portion which converts light to electricity or converts electricity to light, the active portion having a front side for the transmittal of the light and a back side opposite from the front side, at least two electrical leads to the active portion to convey electricity to or from the active portion, an enclosure surrounding the active portion and through which the at least two electrical leads pass wherein the hermetically sealed enclosure comprises at the front side of the active portion a barrier material which allows for transmittal of light, one or more getter materials disposed so as to not impede the transmission of light to or from the active portion, and a contiguous gap pathway to the getter material which pathway is disposed between the active portion and the barrier material.

  19. Brain-Computer Interfaces

    E-Print Network [OSTI]

    Aggarwal, Khushbu

    2009-01-01T23:59:59.000Z

    I \\ November 16, 2008). CNN. ’Brain’ in a dish ?ies ?ightREFERENCES Adams, Ray. Brain Computer Interfaces: Psychologyaccessed Biever, Celeste. Brain cells in a dish ?y ?ghter

  20. Smart Interfaces superhydrophobe Oberflchen

    E-Print Network [OSTI]

    Kohlenbach, Ulrich

    forschen 24 Smart Interfaces ­ superhydrophobe Oberflächen Superhydrophobe, selbstreinigende-Silica-Hybridteilchen ermöglichen, lang- zeitstabile superhydrophobe Oberflächen einfach herzustellen. Smart Interfaces unten). Blattes runter. Neben der Struktur auf der Mikro- meter-Skala muss das Material, aus dem die

  1. Laser device

    DOE Patents [OSTI]

    Scott, Jill R. (Idaho Falls, ID); Tremblay, Paul L. (Idaho Falls, ID)

    2007-07-10T23:59:59.000Z

    A laser device includes a target position, an optical component separated a distance J from the target position, and a laser energy source separated a distance H from the optical component, distance H being greater than distance J. A laser source manipulation mechanism exhibits a mechanical resolution of positioning the laser source. The mechanical resolution is less than a spatial resolution of laser energy at the target position as directed through the optical component. A vertical and a lateral index that intersect at an origin can be defined for the optical component. The manipulation mechanism can auto align laser aim through the origin during laser source motion. The laser source manipulation mechanism can include a mechanical index. The mechanical index can include a pivot point for laser source lateral motion and a reference point for laser source vertical motion. The target position can be located within an adverse environment including at least one of a high magnetic field, a vacuum system, a high pressure system, and a hazardous zone. The laser source and an electro-mechanical part of the manipulation mechanism can be located outside the adverse environment. The manipulation mechanism can include a Peaucellier linkage.

  2. SWAMI: An Autonomous Mobile Robot for Inspection of Nuclear Waste Storage Facilities

    E-Print Network [OSTI]

    Stephens, Larry M.

    SWAMI: An Autonomous Mobile Robot for Inspection of Nuclear Waste Storage Facilities Ron Fulbright Inspector (SWAMI) is a prototype mobile robot designed to perform autonomous inspection of nuclear waste user interface building tool called UIM/X. Introduction Safe disposal of nuclear waste is a difficult

  3. The use of mobile mapping technology to automate surveying and monitoring of southern pine beetle

    E-Print Network [OSTI]

    Petty, Saul David

    2005-08-29T23:59:59.000Z

    FIGURE Page 1 Thesis outline???????????????????????... 3 2 SPBIS mobile mapping project flow chart????????????.. 11 3 Southern Pine Beetle distribution area??????????????. 15 4 The life stages of Dendroctonous... frontalis Zimmerman, the Southern Pine Beetle????????????????????????.. 17 5 The digital SPBIS survey form, pages 1-5????????????. 24 6 The SPBIS User interface with the screen prompts for uploading data from the mobile unit...

  4. An interface tracking model for droplet electrocoalescence.

    SciTech Connect (OSTI)

    Erickson, Lindsay Crowl

    2013-09-01T23:59:59.000Z

    This report describes an Early Career Laboratory Directed Research and Development (LDRD) project to develop an interface tracking model for droplet electrocoalescence. Many fluid-based technologies rely on electrical fields to control the motion of droplets, e.g. microfluidic devices for high-speed droplet sorting, solution separation for chemical detectors, and purification of biodiesel fuel. Precise control over droplets is crucial to these applications. However, electric fields can induce complex and unpredictable fluid dynamics. Recent experiments (Ristenpart et al. 2009) have demonstrated that oppositely charged droplets bounce rather than coalesce in the presence of strong electric fields. A transient aqueous bridge forms between approaching drops prior to pinch-off. This observation applies to many types of fluids, but neither theory nor experiments have been able to offer a satisfactory explanation. Analytic hydrodynamic approximations for interfaces become invalid near coalescence, and therefore detailed numerical simulations are necessary. This is a computationally challenging problem that involves tracking a moving interface and solving complex multi-physics and multi-scale dynamics, which are beyond the capabilities of most state-of-the-art simulations. An interface-tracking model for electro-coalescence can provide a new perspective to a variety of applications in which interfacial physics are coupled with electrodynamics, including electro-osmosis, fabrication of microelectronics, fuel atomization, oil dehydration, nuclear waste reprocessing and solution separation for chemical detectors. We present a conformal decomposition finite element (CDFEM) interface-tracking method for the electrohydrodynamics of two-phase flow to demonstrate electro-coalescence. CDFEM is a sharp interface method that decomposes elements along fluid-fluid boundaries and uses a level set function to represent the interface.

  5. Spatial audio in small screen device displays Ashley Walker and Stephen Brewster

    E-Print Network [OSTI]

    Williamson, John

    :ashley,stephen@dcs.gla.ac.uk keywords: interface design, 3D audio, delay affordance, usability testing Our work addresses problem condition. These results have important implications for the design of multi-tasking interfaces for mobile). They can be used to signal whether a building is being broken into or pollution has reached a critical

  6. Towards Robust Person Recognition On Handheld Devices Using Face and Speaker Identification Technologies

    E-Print Network [OSTI]

    Towards Robust Person Recognition On Handheld Devices Using Face and Speaker Identification identification techniques to a person identification task on a handheld device. These techniques have proven and with the help of the inexpensive sound and image capture hardware present in mobile devices presents

  7. Structure, defects, and strain in silicon-silicon oxide interfaces

    SciTech Connect (OSTI)

    Kova?evi?, Goran, E-mail: gkova@irb.hr; Pivac, Branko [Department of Materials Physics, Rudjer Boskovic Institute, Bijeni?ka 56, P.O.B. 180, HR-10002 Zagreb (Croatia)

    2014-01-28T23:59:59.000Z

    The structure of the interfaces between silicon and silicon-oxide is responsible for proper functioning of MOSFET devices while defects in the interface can deteriorate this function and lead to their failure. In this paper we modeled this interface and characterized its defects and strain. MD simulations were used for reconstructing interfaces into a thermodynamically stable configuration. In all modeled interfaces, defects were found in the form of three-coordinated silicon atom, five coordinated silicon atom, threefold-coordinated oxygen atom, or displaced oxygen atom. Three-coordinated oxygen atom can be created if dangling bonds on silicon are close enough. The structure and stability of three-coordinated silicon atoms (P{sub b} defect) depend on the charge as well as on the electric field across the interface. The negatively charged P{sub b} defect is the most stable one, but the electric field resulting from the interface reduces that stability. Interfaces with large differences in periodic constants of silicon and silicon oxide can be stabilized by buckling of silicon layer. The mechanical stress resulted from the interface between silicon and silicon oxide is greater in the silicon oxide layer. Ab initio modeling of clusters representing silicon and silicon oxide shows about three time larger susceptibility to strain in silicon oxide than in silicon if exposed to the same deformation.

  8. Mobile Museum Tours 1 RUNNING HEAD: MOBILE MUSEUM TOURS

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Mobile Museum Tours 1 RUNNING HEAD: MOBILE MUSEUM TOURS Using mobile technologies for multimedia MUSEUM TOURS Abstract Mobile technology was used to deliver learner-centred experiences to visitors: Across generations and cultures, Banff : Canada (2006)" #12;Mobile Museum Tours 2 RUNNING HEAD: MOBILE

  9. Web Interfaces for Mobile Robots in Public Places Dirk Schulz

    E-Print Network [OSTI]

    Schulz, Dirk

    to understand for people on the Web. ÂŻ If one wants to make a single physical robot amenable to many people to connect robots to the Internet, enabling people all over the World to control them and monitor their op with people in the robot's environment, which arise naturally in applications with Web-based robot con- trol

  10. Touch-Optimised Mobile Interface for Invenio Digital Library

    E-Print Network [OSTI]

    Tapparel, Yannick

    Invenio is free software platform for digital libraries and document repositories on the web. Invenio was originally developed at CERN to power its scientific document server containing about 1 million of articles, books, photos, videos, and more.\

  11. “Cute” displays: Developing an Emotional Bond with Your Mobile Interface

    E-Print Network [OSTI]

    Rousi, Rebekah

    2009-01-01T23:59:59.000Z

    Conference 2004. University of Split, Croatia, DOI= http://Conference 2004. University of Split, Croatia, DOI= http://

  12. Sound in the interface to a mobile computer

    E-Print Network [OSTI]

    Brewster, S.A.

    Brewster,S.A. Human-Computer Interaction International '99 (Munich, Germany) pp 43-47 Lawrence Erlbaum Associates

  13. “Cute” displays: Developing an Emotional Bond with Your Mobile Interface

    E-Print Network [OSTI]

    Rousi, Rebekah

    2009-01-01T23:59:59.000Z

    development. Applied Ergonomics. 33. 289–294. [13] Cheok, A.Engineering, or Kansei Ergonomics, is a sphere of user-

  14. Keeping Mobile Robots Connected

    E-Print Network [OSTI]

    Lynch, Nancy

    2009-06-17T23:59:59.000Z

    Designing robust algorithms for mobile agents with reliable communication is difficult due to the distributed nature of computation, in mobile ad hoc networks (MANETs) the matter is exacerbated by the need to ensure ...

  15. Mobile Proactive secret sharing

    E-Print Network [OSTI]

    Schultz, David Andrew

    2007-01-01T23:59:59.000Z

    This thesis describes mobile proactive secret sharing (MPSS), an extension of proactive secret sharing. Mobile proactive secret sharing is much more flexible than proactive secret sharing in terms of group membership: ...

  16. Nitride semiconductor Surface and interface characterization and device design

    E-Print Network [OSTI]

    Zhang, Hongtao

    2006-01-01T23:59:59.000Z

    a a where we assume a GaN substrate for the thin film. c 13assuming a GaN GaN substrate. Because the spontaneouslayer are grown on the GaN substrate and because the lattice

  17. Interface Surprises May Motivate Novel Oxide Electronic Devices

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated Codes | National Nuclear SecurityIntellectualInterconnecting gold

  18. Figure 1. ComTouch Concept drawing showing a handheld sleeve that fits onto the back of a mobile phone

    E-Print Network [OSTI]

    Jacob, Robert J.K.

    Touch, is a vibrotactile device sleeve that fits over the back of a mobile phone. The basic concept is a handheld deviceFigure 1. ComTouch Concept drawing showing a handheld sleeve that fits onto the back of a mobile

  19. Wireless Internet for The Mobile Enterprise Consortium http://winmec.ucla.edu/ TECHNICAL REPORT/WHITE PAPER

    E-Print Network [OSTI]

    California at Los Angeles, University of

    /WHITE PAPER UCLA-WINMEC-2003-303-MOBILE_MULTIMEDIA-ENTERPRISE CONFIDENTIAL, © Su, Prabhu and Gadh, UCLA (MobIME) Xiaoyong Su, B. S. Prabhu, Rajit Gadh Wireless Internet for the Mobile Enterprise Consortium and Gadh, UCLA-WINMEC-2003-303-MOBILE-MULTIMEDIA- ENTERPRISE, December 2003. PCA device [2]. CC/PP is very

  20. 434 Int. J. Web Engineering and Technology, Vol. 4, No. 4, 2008 Web services-oriented architectures for mobile

    E-Print Network [OSTI]

    434 Int. J. Web Engineering and Technology, Vol. 4, No. 4, 2008 Web services-oriented architectures for mobile SOLAP applications Thierry Badard* Centre for Research in Geomatics Laval University Quebec, Qc G1: With the growing popularity of mobile computing and the empowerment of mobile devices by high end

  1. Anole: A Case for Energy-Aware Mobile Application Design Hui Chen, Bing Luo and Weisong Shi

    E-Print Network [OSTI]

    Shi, Weisong

    Anole: A Case for Energy-Aware Mobile Application Design Hui Chen, Bing Luo and Weisong Shi of energy saving for mobile devices, energy-aware application design is one of the main areas that has not yet been explored comprehensively. In this paper, we argue for the case for energy-aware mobile

  2. Medical Device Reliability BIOMATERIALS

    E-Print Network [OSTI]

    NEMI Medical Electronics team to address short- and long-term reliability issues with medical devices. OurMedical Device Reliability BIOMATERIALS Our goal is to provide medical device manufacturers, and consistency of active implantable medical devices. These devices, including pacemakers, cardiac defibrillators

  3. Coordinated Control and Range Imaging for Mobile Manipulation

    E-Print Network [OSTI]

    Kelly, Alonzo

    Coordinated Control and Range Imaging for Mobile Manipulation Dean Anderson, Thomas M. Howard manipulators currently deployed for explosive ordinance disposal are typically controlled via crude forms interface. The manipulator arms are controlled in #12;2 Anderson, et al. the joint-velocity space

  4. Connector device for building integrated photovoltaic device

    SciTech Connect (OSTI)

    Keenihan, James R.; Langmaid, Joseph A.; Eurich, Gerald K.; Lesniak, Michael J.; Mazor, Michael H.; Cleereman, Robert J.; Gaston, Ryan S.

    2014-06-03T23:59:59.000Z

    The present invention is premised upon a connector device and method that can more easily electrically connect a plurality of PV devices or photovoltaic system components and/or locate these devices/components upon a building structure. It also may optionally provide some additional sub-components (e.g. at least one bypass diode and/or an indicator means) and may enhance the serviceability of the device.

  5. SRS Interface Input

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Interface Input 1. MOA's: The contractor has no MOA's in effect at the Tritium Operations (SRTO) level. 2. AIP's: The contractor has no AIP's in effect at the SRTO level. 3....

  6. A Tangible Mixed Reality Interface for the AMI Automated Meeting Assistant 

    E-Print Network [OSTI]

    Ehnes, Jochen

    2009-01-01T23:59:59.000Z

    In this paper we describe our approach to support ongoing meetings with an automated meeting assistant. We propose an alternative user interface for the AMIDA Content Linking Device. In order for the system to be less ...

  7. Operated device estimation framework

    E-Print Network [OSTI]

    Rengarajan, Janarthanan

    2009-05-15T23:59:59.000Z

    Protective device estimation is a challenging task because there are numerous protective devices present in a typical distribution system. Among various protective devices, auto-reclosers and fuses are the main overcurrent protection on distribution...

  8. PHEV and Grid Interfacing

    Broader source: Energy.gov (indexed) [DOE]

    Materials and Processes for High Temperature Packaging of Power Electronic Devices G. Muralidharan, A. Kercher, M. L. Santella, R. Battiste Materials Science and Technology...

  9. Local intelligent electronic device (IED) rendering templates over limited bandwidth communication link to manage remote IED

    DOE Patents [OSTI]

    Bradetich, Ryan; Dearien, Jason A; Grussling, Barry Jakob; Remaley, Gavin

    2013-11-05T23:59:59.000Z

    The present disclosure provides systems and methods for remote device management. According to various embodiments, a local intelligent electronic device (IED) may be in communication with a remote IED via a limited bandwidth communication link, such as a serial link. The limited bandwidth communication link may not support traditional remote management interfaces. According to one embodiment, a local IED may present an operator with a management interface for a remote IED by rendering locally stored templates. The local IED may render the locally stored templates using sparse data obtained from the remote IED. According to various embodiments, the management interface may be a web client interface and/or an HTML interface. The bandwidth required to present a remote management interface may be significantly reduced by rendering locally stored templates rather than requesting an entire management interface from the remote IED. According to various embodiments, an IED may comprise an encryption transceiver.

  10. Dual mode ion mobility spectrometer and method for ion mobility spectrometry

    DOE Patents [OSTI]

    Scott, Jill R [Idaho Falls, ID; Dahl, David A [Idaho Falls, ID; Miller, Carla J [Idaho Falls, ID; Tremblay, Paul L [Idaho Falls, ID; McJunkin, Timothy R [Idaho Falls, ID

    2007-08-21T23:59:59.000Z

    Ion mobility spectrometer apparatus may include an ion interface that is operable to hold positive and negative ions and to simultaneously release positive and negative ions through respective positive and negative ion ports. A first drift chamber is operatively associated with the positive ion port of the ion interface and encloses an electric field therein. A first ion detector operatively associated with the first drift chamber detects positive ions from the first drift chamber. A second drift chamber is operatively associated with the negative ion port of the ion interface and encloses an electric field therein. A second ion detector operatively associated with the second drift chamber detects negative ions from said second drift chamber.

  11. Course Outline Page 1 of 4 August 22, 2013 ECE 4240 Microprocessor Interfacing

    E-Print Network [OSTI]

    Major, Arkady

    Outline Page 1 of 4 August 22, 2013 ECE 4240 Microprocessor Interfacing Course Outline ­ Fall Term 2013, microprocessors, and microcomputers to the external world, including interfacing of I/O devices with minimum hardware and software, data acquisition with and without microprocessors, data communications, transmission

  12. Towards a smart sensor interface for wearable cough monitoring

    E-Print Network [OSTI]

    Odam, Kofi

    Towards a smart sensor interface for wearable cough monitoring Kofi Odame and Dingkun Du Thayer in a wearable cough monitoring device. In particular, the paper considers the issues of privacy, power is validated with simulation and measurement results. I. INTRODUCTION A cough is the most common condition

  13. Fastbus host interface for VAX/VMS

    SciTech Connect (OSTI)

    Siskind, E.J.

    1983-02-01T23:59:59.000Z

    A list processing microprocessor controlled host interface for FASTBUS has been constructed by connection of a FASTBUS cable segment to the VAX DR-32 Device Interconnect (DDI) implemented via the DEC DR-780 channel on a VAX-11/780 system. Block transfer rates of 5.7 megabytes/second (700 ns per 32 bit longword) are achieved on VAX-11/780 systems equipped with a single MS-780 memory controller, while interleaved dual memory controller systems reach 8.0 megabytes/second (500 ns per longword) performance. The hardware and software interface should work equally well on DR-750 equipped VAX-11/750 systems (with appropriate reductions in achievable bandwidth) as well as on any future VAX systems equipped with a DDI adapter.

  14. X-ray absorption spectroscopy elucidates the impact of structural disorder on electron mobility in amorphous zinc-tin-oxide thin films

    E-Print Network [OSTI]

    to decrease with increasing structural disorder around Zn atoms, suggesting that the degradation in electron for photovoltaic applications by reducing interface recombination and improving device performance.12

  15. Electron mobility calculation for graphene on substrates

    SciTech Connect (OSTI)

    Hirai, Hideki; Ogawa, Matsuto [Department of Electrical and Electronic Engineering, Graduate School of Engineering, Kobe University, 1-1, Rokko-dai, Nada-ku, Kobe 657-8501 (Japan); Tsuchiya, Hideaki, E-mail: tsuchiya@eedept.kobe-u.ac.jp [Department of Electrical and Electronic Engineering, Graduate School of Engineering, Kobe University, 1-1, Rokko-dai, Nada-ku, Kobe 657-8501 (Japan); Japan Science and Technology Agency, CREST, Chiyoda, Tokyo 102-0075 (Japan); Kamakura, Yoshinari; Mori, Nobuya [Japan Science and Technology Agency, CREST, Chiyoda, Tokyo 102-0075 (Japan); Division of Electrical, Electronic and Information Engineering, Graduate School of Engineering, Osaka University, Suita, Osaka 565-0871 (Japan)

    2014-08-28T23:59:59.000Z

    By a semiclassical Monte Carlo method, the electron mobility in graphene is calculated for three different substrates: SiO{sub 2}, HfO{sub 2}, and hexagonal boron nitride (h-BN). The calculations account for polar and non-polar surface optical phonon (OP) scatterings induced by the substrates and charged impurity (CI) scattering, in addition to intrinsic phonon scattering in pristine graphene. It is found that HfO{sub 2} is unsuitable as a substrate, because the surface OP scattering of the substrate significantly degrades the electron mobility. The mobility on the SiO{sub 2} and h-BN substrates decreases due to CI scattering. However, the mobility on the h-BN substrate exhibits a high electron mobility of 170?000?cm{sup 2}/(V·s) for electron densities less than 10{sup 12?}cm{sup ?2}. Therefore, h-BN should be an appealing substrate for graphene devices, as confirmed experimentally.

  16. A framework for automated heart and lung sound analysis using a mobile telemedicine platform

    E-Print Network [OSTI]

    Kuan, Katherine L

    2010-01-01T23:59:59.000Z

    Many resource-poor communities across the globe lack access to quality healthcare,due to shortages in medical expertise and poor availability of medical diagnostic devices. In recent years, mobile phones have become ...

  17. A Mobile Intelligent Interruption Management System Sina Zulkernain, Praveen Madiraju1

    E-Print Network [OSTI]

    Madiraju, Praveen

    Iqbal Ahamed, Karl Stamm (Marquette University, Milwaukee, Wisconsin, USA {sina.zulkernain, praveen.madiraju, sheikh.ahamed, karl.stamm}@marquette.edu) Abstract: Mobile phones have become the most hated device

  18. Reliability of GaN high electron mobility transistors on silicon substrates

    E-Print Network [OSTI]

    Demirtas, Sefa

    2009-01-01T23:59:59.000Z

    GaN High Electron Mobility Transistors are promising devices for high power and high frequency applications such as cellular base stations, radar and wireless network systems, due to the high bandgap and high breakdown ...

  19. Managing the paradigm shift to Mobile platforms in the semiconductor industry

    E-Print Network [OSTI]

    Bae, Il Tack

    2012-01-01T23:59:59.000Z

    In the recent years we are seeing a significant shift from the PC & Laptop, so called EDP (Electronic Data Processing) to the mobile devices such as smartphones and tablet PCs. Driven by strong customer demands and the ...

  20. A microfluidic device for continuous capture and concentration of pathogens from water

    E-Print Network [OSTI]

    Balasubramanian, Ashwin Kumar

    2009-05-15T23:59:59.000Z

    A microfluidic device, based on electrophoretic transport and electrostatic trapping of charged particles, has been developed for continuous capture and concentration of microorganisms from water. A generic design, utilizing mobility and zeta...

  1. FingerReader: A Wearable Device to Support Text Reading on the Go

    E-Print Network [OSTI]

    Shilkrot, Roy

    Visually impaired people report numerous difficulties with accessing printed text using existing technology, including problems with alignment, focus, accuracy, mobility and efficiency. We present a finger worn device that ...

  2. ARM Mobile Facilities

    ScienceCinema (OSTI)

    Orr, Brad; Coulter, Rich

    2014-09-15T23:59:59.000Z

    This video provides an overview of the ARM Mobile Facilities, two portable climate laboratories that can deploy anywhere in the world for campaigns of at least six months.

  3. Mobile Ice Nucleus Spectrometer

    SciTech Connect (OSTI)

    Kulkarni, Gourihar R.; Kok, G. L.

    2012-05-07T23:59:59.000Z

    This first year report presents results from a computational fluid dynamics (CFD) study to assess the flow and temperature profiles within the mobile ice nucleus spectrometer.

  4. Mobile Technology Management

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2013-11-21T23:59:59.000Z

    The directive will ensure that federal organizations and employees within the Department can use mobile technology to support mission requirements in a safe and secure manner.

  5. Ion mobility analysis of lipoproteins

    DOE Patents [OSTI]

    Benner, W. Henry (Danville, CA); Krauss, Ronald M. (Berkeley, CA); Blanche, Patricia J. (Berkeley, CA)

    2007-08-21T23:59:59.000Z

    A medical diagnostic method and instrumentation system for analyzing noncovalently bonded agglomerated biological particles is described. The method and system comprises: a method of preparation for the biological particles; an electrospray generator; an alpha particle radiation source; a differential mobility analyzer; a particle counter; and data acquisition and analysis means. The medical device is useful for the assessment of human diseases, such as cardiac disease risk and hyperlipidemia, by rapid quantitative analysis of lipoprotein fraction densities. Initially, purification procedures are described to reduce an initial blood sample to an analytical input to the instrument. The measured sizes from the analytical sample are correlated with densities, resulting in a spectrum of lipoprotein densities. The lipoprotein density distribution can then be used to characterize cardiac and other lipid-related health risks.

  6. LaTiO?/KTaO? interfaces: A new two-dimensional electron gas system

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Zou, K.; Ismail-Beigi, Sohrab; Kisslinger, Kim; Shen, Xuan; Su, Dong; Walker, F. J.; Ahn, C. H.

    2015-03-01T23:59:59.000Z

    We report a new 2D electron gas (2DEG) system at the interface between a Mott insulator, LaTiO?, and a band insulator, KTaO?. For LaTiO?/KTaO? interfaces, we observe metallic conduction from 2 K to 300 K. One serious technological limitation of SrTiO?-based conducting oxide interfaces for electronics applications is the relatively low carrier mobility (0.5-10 cm˛/V s) of SrTiO? at room temperature. By using KTaO?, we achieve mobilities in LaTiO?/KTaO? interfaces as high as 21 cm˛/V s at room temperature, over a factor of 3 higher than observed in doped bulk SrTiO?. By density functional theory, we attribute the higher mobilitymore »in KTaO? 2DEGs to the smaller effective mass for electrons in KTaO?.« less

  7. Organic spintronic devices and methods for making the same

    DOE Patents [OSTI]

    Vardeny, Zee Valentine; Ndobe, Alex

    2014-09-23T23:59:59.000Z

    An organic spintronic photovoltaic device (100) having an organic electron active layer (102) functionally associated with a pair of electrodes (104, 106). The organic electron active layer (102) can include a spin active molecular radical distributed in the active layer (102) which increases spin-lattice relaxation rates within the active layer (102). The increased spin lattice relaxation rate can also influence the efficiency of OLED and charge mobility in FET devices.

  8. FEASABILITY OF A MOBILE ROBOT WITH ALTERNATIVE CONTROL SYSTEM FOR A CHILD WITH CEREBRAL PALSY

    E-Print Network [OSTI]

    Stansfield, Sharon

    1 FEASABILITY OF A MOBILE ROBOT WITH ALTERNATIVE CONTROL SYSTEM FOR A CHILD WITH CEREBRAL PALSY Carole W. Dennis, OT, ScD, Sharon Stansfield, PhD, and Hélène M. Larin, PT, PhD Ithaca College, Ithaca report is to describe the development of a safe robotic mobility device with an alternative control

  9. Data Backup for Mobile Nodes : a Cooperative Middleware and Experimentation Platform

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    is similar to avionics black- boxes, that tracks cars' history in a way that can be replayed in the event thanks to mobile communicating devices, such as in the automobile context with car- to-car communication.g. automobiles), it has been implemented and evaluated on top of a mobile robot platform described in sect

  10. Future Network and MobileSummit 2013 Conference Proceedings Paul Cunningham and Miriam Cunningham (Eds.)

    E-Print Network [OSTI]

    Secci, Stefano

    for remote execution in order to optimize the application performance and energy efficiency of the mobile of mobile handheld devices such as smart cell phones, tablet PCs and laptops. It is therefore not Copyright computing will occupy a significant proportion of Internet usage in the future. Despite the combined

  11. Evaluating Resistance to Jamming and Casual Interception in Mobile Wireless Networks

    E-Print Network [OSTI]

    Rossi, Sabina

    ,deirossi,marin,srossi}@dais.unive.it ABSTRACT Mobile ad-hoc and sensor networks play an important role in several application fields. The usage-ended Distributed Systems". infrastructures. In practice, nodes that form a MANET may be laptops, smart, latency and overall energy consump- tion. This latter aspect is particularly relevant since mobile devices

  12. Self-Optimization in Mobile Cellular Networks: Power Control and User Association

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Self-Optimization in Mobile Cellular Networks: Power Control and User Association Chung Shue Chen develop mathematical and algorith- mic tools for the self-optimization of mobile cellular networks the wireless devices are proposed. We focus on the optimization of transmit power and of user association

  13. Support for Personal and Service Mobility in Ubiquitous Computing Environments1

    E-Print Network [OSTI]

    von Bochmann, Gregor

    such as Bluetooth can be used to build a personal area network connecting only devices that are close enoughSupport for Personal and Service Mobility in Ubiquitous Computing Environments1 K. El-Khatib2 , N. This paper describes an agent-based architecture that extends personal mobility to ubiquitous environment

  14. Storage-Enabled Access Points for Improved Mobile Performance: An Evaluation Study

    E-Print Network [OSTI]

    Tsaoussidis, Vassilis

    Networks and DTNs has been mainly con- cerned with storage and energy constraints for mobile devices and to which extend the storage and energy constraints can now be somewhat relaxed. We motivate our study basedStorage-Enabled Access Points for Improved Mobile Performance: An Evaluation Study Efthymios

  15. Mobile Location Sharing: An Energy Consumption Study Ekhiotz Jon Vergara, Mihails Prihodko, Simin Nadjm-Tehrani

    E-Print Network [OSTI]

    Mobile Location Sharing: An Energy Consumption Study Ekhiotz Jon Vergara, Mihails Prihodko, Simin- packet interval) highly influences the energy consumption of the mobile device. Our work focuses other clients' location updates (similar to pull behaviour). In order to evaluate the energy consumption and the

  16. Optoelectronic fiber interface design

    E-Print Network [OSTI]

    Spencer, Matthew Edmund

    2008-01-01T23:59:59.000Z

    Recent developments in materials science have led to the development of an exciting, new class of fibers which integrate metals, semiconductors and insulators in the same codrawing process. Various electrical devices have ...

  17. Effect of residual gases in high vacuum on the energy-level alignment at noble metal/organic interfaces

    SciTech Connect (OSTI)

    Helander, M. G.; Wang, Z. B.; Lu, Z. H.

    2011-10-31T23:59:59.000Z

    The energy-level alignment at metal/organic interfaces has traditionally been studied using ultraviolet photoelectron spectroscopy (UPS) in ultra-high vacuum (UHV). However, since most devices are fabricated in high vacuum (HV), these studies do not accurately reflect the interfaces in real devices. We demonstrate, using UPS measurements of samples prepared in HV and UHV and current-voltage measurements of devices prepared in HV, that the small amounts of residual gases that are adsorbed on the surface of clean Cu, Ag, and Au (i.e., the noble metals) in HV can significantly alter the energy-level alignment at metal/organic interfaces.

  18. DEVICE CONTROL TOOL FOR CEBAF BEAM DIAGNOSTICS SOFTWARE

    SciTech Connect (OSTI)

    Pavel Chevtsov

    2008-02-11T23:59:59.000Z

    Continuously monitoring the beam quality in the CEBAF accelerator, a variety of beam diagnostics software created at Jefferson Lab makes a significant contribution to very high availability of the machine for nuclear physics experiments. The interface between this software and beam instrumentation hardware components is provided by a device control tool, which is optimized for beam diagnostics tasks. As a part of the device/driver development framework at Jefferson Lab, this tool is very easy to support and extend to integrate new beam instrumentation components. All device control functions are based on the configuration (ASCII text) files that completely define the used hardware interface standards (CAMAC, VME, RS-232, GPIB, etc.) and communication protocols. The paper presents the main elements of the device control tool for beam diagnostics software at Jefferson Lab.

  19. Jebeile. The Mobile Subject Assistant THE MOBILE SUBJECT ASSISTANT: A MOBILE COURSE TOOL

    E-Print Network [OSTI]

    Rubinstein, Benjamin

    technologies suggests mobile phones may now be a viable tool for classroom use. In this paper we introduce phone technology has developed rapidly over the past decade and new age mobile phones now support muchJebeile. The Mobile Subject Assistant THE MOBILE SUBJECT ASSISTANT: A MOBILE COURSE TOOL

  20. Energy Aware Distributed Speech Recognition for Wireless Mobile Devices

    E-Print Network [OSTI]

    Simunic, Tajana

    studied in the literature. The back- end ASR search including hidden Markov model (HMM) state output drain if used indiscriminately. In this work, we examine the energy usage of a DSR system with respect- related energy drain and propose techniques to minimize energy usage in both areas while maintaining

  1. Dynamics of Tilt-based Browsing on Mobile Devices

    E-Print Network [OSTI]

    Cho, S.J.; Murray-Smith, R.

    Cho,S.J. Murray-Smith,R. Choi,C. Sung,Y. Lee,K. Kim,Y.B. CHI '07 extended abstracts on Human factors in computing systems, http://doi.acm.org/10.1145/1240866.1240930 pp 1947 - 1952 ACM Press

  2. Autonomous smart antenna systems for future mobile devices 

    E-Print Network [OSTI]

    Zhou, Wei

    2015-06-29T23:59:59.000Z

    Along with the current trend of wireless technology innovation, wideband, compact size, low-profile, lightweight and multiple functional antenna and array designs are becoming more attractive in many applications. ...

  3. UCSF Computer and Mobile Device Encryption Waiver Request Procedure

    E-Print Network [OSTI]

    Derisi, Joseph

    Information Security Requirements Federal and state laws and regulations require that confidential electronic Information Act (CMIA) UCSF 650-16 Information Security and Confidentiality Policy requires UCSF compliance this encryption requirement from the UCSF Information Security Office. NOTE: The compromise of restricted data

  4. NIST Special Publication 800-101 Guidelines on Mobile Device

    E-Print Network [OSTI]

    Springfield, VA Wayne Jansen Booz-Allen-Hamilton McLean, VA http://dx.doi.org/10.6028/NIST.SP. 800-101r1 May

  5. INTRODUCTION As wireless and portable mobile devices become

    E-Print Network [OSTI]

    Hou, Y. Thomas

    than electric power grids). After the first electri- cal signal was sent across the Atlantic, Nikola Tesla, a pioneering electrical engineer, experi- mented with large scale wireless power distribu- tion, Tesla's invention was not successful and was never put into practical use. In the late 20th century

  6. UIA : a global connectivity architecture for mobile personal devices

    E-Print Network [OSTI]

    Ford, Bryan, 1973-

    2008-01-01T23:59:59.000Z

    The Internet's architecture, designed in the days of large, stationary computers tended by technically savvy and accountable administrators, fails to meet the demands of the emerging ubiquitous computing era. Nontechnical ...

  7. GE MEMS for LTE Advanced Mobile Devices | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power AdministrationField8,Dist.Newof EnergyFunding OpportunityF G F ! ( ! ( ! ( ! (MEMS

  8. Science at the interface : grain boundaries in nanocrystalline metals.

    SciTech Connect (OSTI)

    Rodriguez, Mark Andrew; Follstaedt, David Martin; Knapp, James Arthur; Brewer, Luke N.; Holm, Elizabeth Ann; Foiles, Stephen Martin; Hattar, Khalid M.; Clark, Blythe B.; Olmsted, David L.; Medlin, Douglas L.

    2009-09-01T23:59:59.000Z

    Interfaces are a critical determinant of the full range of materials properties, especially at the nanoscale. Computational and experimental methods developed a comprehensive understanding of nanograin evolution based on a fundamental understanding of internal interfaces in nanocrystalline nickel. It has recently been shown that nanocrystals with a bi-modal grain-size distribution possess a unique combination of high-strength, ductility and wear-resistance. We performed a combined experimental and theoretical investigation of the structure and motion of internal interfaces in nanograined metal and the resulting grain evolution. The properties of grain boundaries are computed for an unprecedented range of boundaries. The presence of roughening transitions in grain boundaries is explored and related to dramatic changes in boundary mobility. Experimental observations show that abnormal grain growth in nanograined materials is unlike conventional scale material in both the level of defects and the formation of unfavored phases. Molecular dynamics simulations address the origins of some of these phenomena.

  9. Benefits of Using Mobile Transformers and Mobile Substations...

    Broader source: Energy.gov (indexed) [DOE]

    Benefits of Using Mobile Transformers and Mobile Substations for Rapidly Restoring Electrical Service: a Report to the United States Congress Pursuant to Section 1816 of the Energy...

  10. Using a Fingertip Tactile Device to Substitute Kinesthetic Feedback in Haptic Interaction

    E-Print Network [OSTI]

    Siena, Universitŕ di

    feedback provided by the electric motor of the joystick is nearly indistinguishable from the sensation felt environment, haptic interfaces, of the impedance type, available today use active input devices as motors

  11. 670 IEEE ELECTRON DEVICE LETTERS, VOL. 33, NO. 5, MAY 2012 Breakdown-Voltage-Enhancement Technique for

    E-Print Network [OSTI]

    Ng, Wai Tung

    670 IEEE ELECTRON DEVICE LETTERS, VOL. 33, NO. 5, MAY 2012 Breakdown-Voltage-Enhancement Technique (FP), GaN power devices, leakage current. I. INTRODUCTION AlGaN/GaN high-electron-mobility transistors Devices, University of Electronic Science and Technology of China, Chengdu 610054, China. E. Xu, J. Lee, N

  12. SBone: Personal Device Sharing Using Social Networks Pravin Shankar, Badri Nath, Liviu Iftode, Vancheswaran Ananthanarayanan, Lu Han

    E-Print Network [OSTI]

    Iftode, Liviu

    SBone: Personal Device Sharing Using Social Networks Pravin Shankar, Badri Nath, Liviu Iftode, iftode, vanchi, luhan}@cs.rutgers.edu Abstract People own a number of personal devices whose state, making mobile personal devices an increasingly important com- puting platform. People tend to share

  13. A methodology to identify and quantify mobility-reducing defects in 4H-silicon carbide power metal-oxide-semiconductor field-effect transistors

    SciTech Connect (OSTI)

    Ettisserry, D. P., E-mail: deva@umd.edu; Goldsman, N. [Department of Electrical and Computer Engineering, University of Maryland, College Park, Maryland 20742 (United States); Lelis, A. [U.S. Army Research Laboratory, 2800 Powder Mill Road, Adelphi, Maryland 20783 (United States)

    2014-03-14T23:59:59.000Z

    In this paper, we present a methodology for the identification and quantification of defects responsible for low channel mobility in 4H-Silicon Carbide (SiC) power metal-oxide-semiconductor field-effect transistors (MOSFETs). To achieve this, we use an algorithm based on 2D-device simulations of a power MOSFET, density functional simulations, and measurement data. Using physical modeling of carrier mobility and interface traps, we reproduce the experimental I-V characteristics of a 4H-SiC doubly implanted MOSFET through drift-diffusion simulation. We extract the position of Fermi level and the occupied trap density as a function of applied bias and temperature. Using these inputs, our algorithm estimates the number of possible trap types, their energy levels, and concentrations at 4H-SiC/SiO{sub 2} interface. Subsequently, we use density functional theory (DFT)-based ab initio simulations to identify the atomic make-up of defects causing these trap levels. We study silicon vacancy and carbon di-interstitial defects in the SiC side of the interface. Our algorithm indicates that the D{sub it} spectrum near the conduction band edge (3.25?eV) is composed of three trap types located at 2.8–2.85?eV, 3.05?eV, and 3.1–3.2?eV, and also calculates their densities. Based on DFT simulations, this work attributes the trap levels very close to the conduction band edge to the C di-interstitial defect.

  14. Smart Mobility Dutch Automotive

    E-Print Network [OSTI]

    Franssen, Michael

    Smart Mobility #12;Dutch Automotive Industry 300 companies 45k employees 17B revenue #12;Dutch Automotive Industry Focus area's: · Vehicle efficiency · Cooperative Mobility #12;Freedom, prosperity, fun;Automotive Technology Car as sustainable zero emission vehicles #12;Automotive Technology Electromagnetic car

  15. Interfaces Module March 28, 2013

    E-Print Network [OSTI]

    Rhoads, James

    the design solution for the physical interface o Kind of like a ConOps to the IRD · Explicitly identify

  16. A Survey of Mobile Cloud Computing Applications: Perspectives and Challenges

    E-Print Network [OSTI]

    Chen, Ing-Ray

    operating systems, configure computation environment, and develop software. The cloud provides a powerful from the marriage of powerful yet affordable mobile devices and cloud computing. In this paper we in the cloud. So users simply use the applications without concerning system configuration prob- lems

  17. Mobile phone companies sell more batteries than phones to

    E-Print Network [OSTI]

    Starner, Thad E.

    Mobile phone companies sell more batteries than phones to consumers. The devices users buy gen- erally include rechargeable batteries so that they are immediately useful. On average, however, the consumer must own more than one battery during the phone's life. The same is probably true for laptops

  18. Towards Environmentally Sustainable Mobile Computing Through an Economic Framework

    E-Print Network [OSTI]

    Namboodiri, Vinod

    of initiatives and research endeavors targeting the minimization of power and energy consumption of information and communication technologies (ICT), what has been largely missing is an effort to reduce the energy consumption. Prior work with energy efficiency in mobile devices has primarily focused on the goal of maximizing

  19. Bipolar thermoelectric devices

    E-Print Network [OSTI]

    Pipe, Kevin P. (Kevin Patrick), 1976-

    2004-01-01T23:59:59.000Z

    The work presented here is a theoretical and experimental study of heat production and transport in bipolar electrical devices, with detailed treatment of thermoelectric effects. Both homojunction and heterojunction devices ...

  20. Method of multiplexed analysis using ion mobility spectrometer

    DOE Patents [OSTI]

    Belov, Mikhail E. (Richland, WA); Smith, Richard D. (Richland, WA)

    2009-06-02T23:59:59.000Z

    A method for analyzing analytes from a sample introduced into a Spectrometer by generating a pseudo random sequence of a modulation bins, organizing each modulation bin as a series of submodulation bins, thereby forming an extended pseudo random sequence of submodulation bins, releasing the analytes in a series of analyte packets into a Spectrometer, thereby generating an unknown original ion signal vector, detecting the analytes at a detector, and characterizing the sample using the plurality of analyte signal subvectors. The method is advantageously applied to an Ion Mobility Spectrometer, and an Ion Mobility Spectrometer interfaced with a Time of Flight Mass Spectrometer.

  1. e Case for Device Power States Marcelo Martins

    E-Print Network [OSTI]

    Fonseca, Rodrigo

    .g., [ , , ]) energy usage, on platforms ranging from sensor networks, to mobile phones, laptops, and servers. Ideally, it is essential that these devices make e cient use of energy resources. Understanding this usage enables, if any, energy-measurement capabilities. In these cases, we must resort to estimating energy usage using

  2. Justification for Acquisition and Use of Broadband Device Request Form

    E-Print Network [OSTI]

    Personal Use of NIH Information Technology (IT) Resources Policy (http://www3.od.nih.gov/oma/manualchapters/management Cellular Activation* AT&T Verizon T-Mobile Provide SIMM Card Number* *GO TO SETTINGS ­ GENERAL country. I will immediately report the loss or theft of my broadband device as outlined in the Managing

  3. Locative Life: Geocaching, Mobile Gaming, and Embodiment

    E-Print Network [OSTI]

    Farman, Jason

    2009-01-01T23:59:59.000Z

    Gaming, Geocaching, Mobile Technologies, GPS, Embodiment 1.activity for many mobile technology users. While Manovich

  4. VMS software for the Jorway-411 Interface

    SciTech Connect (OSTI)

    Dorries, T.; Moore, C.; Pordes, R.; White, V.

    1987-08-01T23:59:59.000Z

    This reports on a Software Package to access CAMAC through the Jorway-411 Interface, for use on VAX/VMS systems. The software can be used to access parallel and/or serial CAMAC branch highways, and multiple Jorways may be connected to the VAX UNIBUS or Micro Vax QBUS. The software available includes a VAX/VMS device driver for the JORWAY-411 and support routines and programs that access the driver. The software is accompanied by extensive documentation. As discussed below, several of the packages originated from other institutions and have been enhanced by the Data Acquisition Software Group at Fermilab. The software package is in widespread use at Fermilab and over 20 other sites. The software can be run on any of the UNIBUS VAX-11 family of computers using a UNIBUS Jorway-411 to interface to CAMAC, or on a Microvax-II either interfaced to CAMAC through a Q-BUS Jorway-411, or through a Microverter and UNIBUS Jorway. The package includes facilities for performing CAMAC operations remotely. The VAX on which the user runs his or her program need not be directly connected to the Jorway. Server programs allow a VAX connected via DECNET or a PDP-11 connected via a DR11-W link to be the route for accessing the CAMAC hardware.

  5. Organic photosensitive devices

    DOE Patents [OSTI]

    Rand, Barry P; Forrest, Stephen R

    2013-11-26T23:59:59.000Z

    The present invention generally relates to organic photosensitive optoelectronic devices. More specifically, it is directed to organic photosensitive optoelectronic devices having a photoactive organic region containing encapsulated nanoparticles that exhibit plasmon resonances. An enhancement of the incident optical field is achieved via surface plasmon polariton resonances. This enhancement increases the absorption of incident light, leading to a more efficient device.

  6. Articulating feedstock delivery device

    DOE Patents [OSTI]

    Jordan, Kevin

    2013-11-05T23:59:59.000Z

    A fully articulable feedstock delivery device that is designed to operate at pressure and temperature extremes. The device incorporates an articulating ball assembly which allows for more accurate delivery of the feedstock to a target location. The device is suitable for a variety of applications including, but not limited to, delivery of feedstock to a high-pressure reaction chamber or process zone.

  7. Amorphous silicon photovoltaic devices

    DOE Patents [OSTI]

    Carlson, David E.; Lin, Guang H.; Ganguly, Gautam

    2004-08-31T23:59:59.000Z

    This invention is a photovoltaic device comprising an intrinsic or i-layer of amorphous silicon and where the photovoltaic device is more efficient at converting light energy to electric energy at high operating temperatures than at low operating temperatures. The photovoltaic devices of this invention are suitable for use in high temperature operating environments.

  8. Standard interface file handbook

    SciTech Connect (OSTI)

    Shapiro, A.; Huria, H.C. (Cincinnati Univ., OH (United States))

    1992-10-01T23:59:59.000Z

    This handbook documents many of the standard interface file formats that have been adopted by the US Department of Energy to facilitate communications between and portability of, various large reactor physics and radiation transport software packages. The emphasis is on those files needed for use of the VENTURE/PC diffusion-depletion code system. File structures, contents and some practical advice on use of the various files are provided.

  9. Virtual button interface

    DOE Patents [OSTI]

    Jones, Jake S. (Albuquerque, NM)

    1999-01-01T23:59:59.000Z

    An apparatus and method of issuing commands to a computer by a user interfacing with a virtual reality environment. To issue a command, the user directs gaze at a virtual button within the virtual reality environment, causing a perceptible change in the virtual button, which then sends a command corresponding to the virtual button to the computer, optionally after a confirming action is performed by the user, such as depressing a thumb switch.

  10. Virtual button interface

    DOE Patents [OSTI]

    Jones, J.S.

    1999-01-12T23:59:59.000Z

    An apparatus and method of issuing commands to a computer by a user interfacing with a virtual reality environment are disclosed. To issue a command, the user directs gaze at a virtual button within the virtual reality environment, causing a perceptible change in the virtual button, which then sends a command corresponding to the virtual button to the computer, optionally after a confirming action is performed by the user, such as depressing a thumb switch. 4 figs.

  11. Edgar Nett Mobile Computer Communication SS'14 1 Mobility Support

    E-Print Network [OSTI]

    Edgar Nett Mobile Computer Communication SS'14 1 Mobility Support (Network Layer) #12;Edgar Nett updates take to long time (up to one day) č TCP connections break, security problems etc #12;Edgar Nett mobility (connection typically via a low bandwidth radio link) #12;Edgar Nett Mobile Computer Communication

  12. 1 Edgar Nett Mobile Computer Communication SS'10 Mobility Support

    E-Print Network [OSTI]

    1 Edgar Nett Mobile Computer Communication SS'10 Mobility Support (Network Layer) #12;2 Edgar Nett updates take to long time (up to one day) TCP connections break, security problems etc #12;3 Edgar Nett bandwidth radio link) #12;4 Edgar Nett Mobile Computer Communication SS'10 Roles and Definitions Mobile Node

  13. Portable data collection device

    DOE Patents [OSTI]

    French, Patrick D. (Aurora, CO)

    1996-01-01T23:59:59.000Z

    The present invention provides a portable data collection device that has a variety of sensors that are interchangeable with a variety of input ports in the device. The various sensors include a data identification feature that provides information to the device regarding the type of physical data produced by each sensor and therefore the type of sensor itself. The data identification feature enables the device to locate the input port where the sensor is connected and self adjust when a sensor is removed or replaced. The device is able to collect physical data, whether or not a function of a time.

  14. Unitary lens semiconductor device

    DOE Patents [OSTI]

    Lear, Kevin L. (Albuquerque, NM)

    1997-01-01T23:59:59.000Z

    A unitary lens semiconductor device and method. The unitary lens semiconductor device is provided with at least one semiconductor layer having a composition varying in the growth direction for unitarily forming one or more lenses in the semiconductor layer. Unitary lens semiconductor devices may be formed as light-processing devices such as microlenses, and as light-active devices such as light-emitting diodes, photodetectors, resonant-cavity light-emitting diodes, vertical-cavity surface-emitting lasers, and resonant cavity photodetectors.

  15. DESIRED MOBILE APPLICATION FEATURES IN AGRICULTURAL COMMUNICATIONS AND JOURNALISM STUDENTS AT TEXAS A&M UNIVERSITY

    E-Print Network [OSTI]

    Meadows, Casey

    2013-02-12T23:59:59.000Z

    traditional classroom instruction. The study sought to see what students find useful or difficult to utilize in current popular mobile applications on smart devices, such as the Blackberry, iPad, iPhone, Android devices, and even the iPod Touch in some...

  16. DELAR: Device/Energy/Load Aware Relaying in Heterogenous Wireless Ad Hoc Networks

    E-Print Network [OSTI]

    Zhang, Yanchao

    - newable energy sources. In DELAR the heterogeneity of nodal energy capabilities or device types, nodalDELAR: Device/Energy/Load Aware Relaying in Heterogenous Wireless Ad Hoc Networks Wei Liu Energy conservation is of great importance for mobile ad hoc networks in which most nodes are equipped

  17. Novel Nanostructured Interface Solution for Automotive Thermoelectric...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Nanostructured Interface Solution for Automotive Thermoelectric Modules Application Novel Nanostructured Interface Solution for Automotive Thermoelectric Modules Application...

  18. 912 IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, VOL. 47, NO. 2, MARCH/APRIL 2011 Impact of SiC Devices on Hybrid Electric and

    E-Print Network [OSTI]

    Tolbert, Leon M.

    ; in particular, the size of the battery bank can be reduced for optimum design. Index Terms--Efficiency, hybrid (SiC) devices as battery interface, motor controller, etc., in a hybrid electric vehicle (HEV]­[5]. The application of SiC devices (as battery interface, motor controller, etc.) in a HEV has merit because

  19. Collaborative Exploration with a Micro Aerial Vehicle: A Novel Interaction Method for Controlling a MAV with a Hand-Held Device

    E-Print Network [OSTI]

    Pitman, David

    2012-01-01T23:59:59.000Z

    In order to collaboratively explore an environment with a Micro Aerial Vehicle (MAV), an operator needs a mobile interface, which can support the operator’s divided attention. To this end, we developed the Micro Aerial ...

  20. Enhancing video transmission in MANETs utilizing multiple interfaces and multiple channels per node

    E-Print Network [OSTI]

    Bouras, Christos

    . Simulation results indicate that the mechanism improves the networks capacity for video transmissionEnhancing video transmission in MANETs utilizing multiple interfaces and multiple channels per node}@cti.gr, gkamas@aeavellas.gr {politaki, tsanai}@ceid.upatras.gr Abstract. Mobile Ad hoc NETworks (MANETs

  1. Contextualizing urban mobile fabrics

    E-Print Network [OSTI]

    Lin, Michael Chia-Liang

    2007-01-01T23:59:59.000Z

    This thesis is focus on the urban fabric issues. To be more specific, I will focus on the "Mobile Fabrics" within the larger Asian urban context. Instead of working with a specific geographical site; I will focus on the ...

  2. Limits of social mobilization

    E-Print Network [OSTI]

    Pentland, Alex Paul

    The Internet and social media have enabled the mobilization of large crowds to achieve time-critical feats, ranging from mapping crises in real time, to organizing mass rallies, to conducting search-and-rescue operations ...

  3. The relationship between grain boundary structure, defect mobility, and grain boundary sink efficiency

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Uberuaga, Blas Pedro; Vernon, Louis J.; Martinez, Enrique; Voter, Arthur F.

    2015-03-13T23:59:59.000Z

    Nanocrystalline materials have received great attention due to their potential for improved functionality and have been proposed for extreme environments where the interfaces are expected to promote radiation tolerance. However, the precise role of the interfaces in modifying defect behavior is unclear. Using long-time simulations methods, we determine the mobility of defects and defect clusters at grain boundaries in Cu. We find that mobilities vary significantly with boundary structure and cluster size, with larger clusters exhibiting reduced mobility, and that interface sink efficiency depends on the kinetics of defects within the interface via the in-boundary annihilation rate of defects. Thus,more »sink efficiency is a strong function of defect mobility, which depends on boundary structure, a property that evolves with time. Further, defect mobility at boundaries can be slower than in the bulk, which has general implications for the properties of polycrystalline materials. Finally, we correlate defect energetics with the volumes of atomic sites at the boundary.« less

  4. Surface segregation at the aluminum interface of poly(3-hexylthiophene)/fullerene solar cells

    SciTech Connect (OSTI)

    Orimo, Akiko; Masuda, Kohji; Honda, Satoshi; Benten, Hiroaki; Ito, Shinzaburo [Department of Polymer Chemistry, Graduate School of Engineering, Kyoto University, Katsura, Kyoto 615-8510 (Japan); Ohkita, Hideo [Department of Polymer Chemistry, Graduate School of Engineering, Kyoto University, Katsura, Kyoto 615-8510, Japan and PRESTO, Japan Science and Technology Agency (JST), 4-1-8 Honcho Kawaguchi, Saitama 332-0012 (Japan); Tsuji, Hiroshi [Department of Electronic Science and Engineering, Graduate School of Engineering, Kyoto University, Katsura, Kyoto 615-8510 (Japan)

    2010-01-25T23:59:59.000Z

    The effects of thermal annealing before and after Al deposition on poly(3-hexylthiophene) (P3HT)/[6,6]-phenyl-C{sub 61} butyric acid methyl ester (PCBM) blend solar cells were investigated by current density-voltage measurements and x-ray photoelectron spectroscopy (XPS). Compared to the preannealed device, the postannealed device exhibited enhanced open-circuit voltage (V{sub OC}), which is ascribed to the decrease in the reverse saturation current density J{sub 0}. The XPS measurements demonstrated that P3HT is dominant at the Al interface in the preannealed device while PCBM is instead dominant in the postannealed device. This surface-segregated PCBM formed in the postannealed device can serve as a hole-blocking layer at the Al interface to reduce J{sub 0}, and therefore improve V{sub OC}.

  5. Web Browser Interface (WBUI)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over OurThe Iron SpinPrincetonUsing Maps1DOETHE FUTUREBrowser Interface (WBUI)

  6. Web Service Interface (API)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over OurThe Iron SpinPrincetonUsing Maps1DOETHE FUTUREBrowser Interface

  7. Multijunction photovoltaic device and method of manufacture

    DOE Patents [OSTI]

    Arya, Rejeewa R. (Jamison, PA); Catalano, Anthony W. (Boulder, CO); Bennett, Murray (Longhorne, PA)

    1995-04-04T23:59:59.000Z

    A multijunction photovoltaic device includes first, second, and third amorphous silicon p-i-n photovoltaic cells in a stacked arrangement. The intrinsic layers of the second and third cells are formed of a-SiGe alloys with differing ratios of Ge such that the bandgap of the intrinsic layers respectively decrease from the first uppermost cell to the third lowermost cell. An interface layer, composed of a doped silicon compound, is disposed between the two cells and has a lower bandgap than the respective n- and p-type adjacent layers of the first and second cells. The interface layer forms an ohmic contact with the one of the adjacent cell layers of the same conductivity type, and a tunnel junction with the other of the adjacent cell layers.

  8. Micro-cooler enhancements by barrier interface analysis

    SciTech Connect (OSTI)

    Stephen, A.; Dunn, G. M. [Department of Physics, University of Aberdeen, King's College, AB24 3UE Aberdeen (United Kingdom)] [Department of Physics, University of Aberdeen, King's College, AB24 3UE Aberdeen (United Kingdom); Glover, J.; Oxley, C. H. [Department of Engineering, De Montfort University, Gateway, LE1 9BH Leicester (United Kingdom)] [Department of Engineering, De Montfort University, Gateway, LE1 9BH Leicester (United Kingdom); Bajo, M. Montes; Kuball, M. [Center for Device Thermography and Reliability, H. H. Wills Physics Laboratory, University of Bristol, BS8 1TL Bristol (United Kingdom)] [Center for Device Thermography and Reliability, H. H. Wills Physics Laboratory, University of Bristol, BS8 1TL Bristol (United Kingdom); Cumming, D. R. S.; Khalid, A. [School of Engineering, University of Glasgow, Rankine Building, G12 8LT Glasgow (United Kingdom)] [School of Engineering, University of Glasgow, Rankine Building, G12 8LT Glasgow (United Kingdom)

    2014-02-15T23:59:59.000Z

    A novel gallium arsenide (GaAs) based micro-cooler design, previously analysed both experimentally and by an analytical Heat Transfer (HT) model, has been simulated using a self-consistent Ensemble Monte Carlo (EMC) model for a more in depth analysis of the thermionic cooling in the device. The best fit to the experimental data was found and was used in conjunction with the HT model to estimate the cooler-contact resistance. The cooling results from EMC indicated that the cooling power of the device is highly dependent on the charge distribution across the leading interface. Alteration of this charge distribution via interface extensions on the nanometre scale has shown to produce significant changes in cooler performance.

  9. Barrier breaching device

    DOE Patents [OSTI]

    Honodel, C.A.

    1983-06-01T23:59:59.000Z

    A barrier breaching device that is designed primarily for opening holes in interior walls of buildings uses detonating fuse for explosive force. The fuse acts as the ribs or spokes of an umbrella-like device that may be opened up to form a cone. The cone is placed against the wall so that detonating fuse that rings the base of the device and which is ignited by the spoke-like fuses serves to cut a circular hole in the wall.

  10. Barrier breaching device

    DOE Patents [OSTI]

    Honodel, Charles A. (Tracy, CA)

    1985-01-01T23:59:59.000Z

    A barrier breaching device that is designed primarily for opening holes in interior walls of buildings uses detonating fuse for explosive force. The fuse acts as the ribs or spokes of an umbrella-like device that may be opened up to form a cone. The cone is placed against the wall so that detonating fuse that rings the base of the device and which is ignited by the spoke-like fuses serves to cut a circular hole in the wall.

  11. A compact transport and charge model for GaN-based high electron mobility transistors for RF applications

    E-Print Network [OSTI]

    Radhakrishna, Ujwal

    2013-01-01T23:59:59.000Z

    Gallium Nitride (GaN)-based high electron mobility transistors (HEMTs) are rapidly emerging as front-runners in high-power mm-wave circuit applications. For circuit design with current devices and to allow sensible future ...

  12. Laparoscopic simulation interface

    DOE Patents [OSTI]

    Rosenberg, Louis B.

    2006-04-04T23:59:59.000Z

    A method and apparatus for providing high bandwidth and low noise mechanical input and output for computer systems. A gimbal mechanism provides two revolute degrees of freedom to an object about two axes of rotation. A linear axis member is coupled to the gimbal mechanism at the intersection of the two axes of rotation. The linear axis member is capable of being translated along a third axis to provide a third degree of freedom. The user object is coupled to the linear axis member and is thus translatable along the third axis so that the object can be moved along all three degrees of freedom. Transducers associated with the provided degrees of freedom include sensors and actuators and provide an electromechanical interface between the object and a digital processing system. Capstan drive mechanisms transmit forces between the transducers and the object. The linear axis member can also be rotated about its lengthwise axis to provide a fourth degree of freedom, and, optionally, a floating gimbal mechanism is coupled to the linear axis member to provide fifth and sixth degrees of freedom to an object. Transducer sensors are associated with the fourth, fifth, and sixth degrees of freedom. The interface is well suited for simulations of medical procedures and simulations in which an object such as a stylus or a joystick is moved and manipulated by the user.

  13. Interconnected semiconductor devices

    DOE Patents [OSTI]

    Grimmer, Derrick P. (White Bear Lake, MN); Paulson, Kenneth R. (North St. Paul, MN); Gilbert, James R. (St. Paul, MN)

    1990-10-23T23:59:59.000Z

    Semiconductor layer and conductive layer formed on a flexible substrate, divided into individual devices and interconnected with one another in series by interconnection layers and penetrating terminals.

  14. High efficiency photovoltaic device

    DOE Patents [OSTI]

    Guha, Subhendu (Troy, MI); Yang, Chi C. (Troy, MI); Xu, Xi Xiang (Findlay, OH)

    1999-11-02T23:59:59.000Z

    An N-I-P type photovoltaic device includes a multi-layered body of N-doped semiconductor material which has an amorphous, N doped layer in contact with the amorphous body of intrinsic semiconductor material, and a microcrystalline, N doped layer overlying the amorphous, N doped material. A tandem device comprising stacked N-I-P cells may further include a second amorphous, N doped layer interposed between the microcrystalline, N doped layer and a microcrystalline P doped layer. Photovoltaic devices thus configured manifest improved performance, particularly when configured as tandem devices.

  15. Mobile Robot Sensing for Environmental Applications

    E-Print Network [OSTI]

    2007-01-01T23:59:59.000Z

    Mobile robot sensing for environmental applications Amarjeetwith Mobile robot sensing for environmental applications (a)Mobile robot sensing for environmental applications only a

  16. Update on mobile applications in dermatology

    E-Print Network [OSTI]

    Patel, Shivani; Eluri, Madhu; Boyers, Lindsay N; Karimkhani, Chante; Dellavalle, Robert

    2015-01-01T23:59:59.000Z

    FDA regulation of mobile health technologies. N Engl J Med.providers. As technology advances, mobile applications maytechnology continues to advance and physicians have greater access to mobile-

  17. Mobile Persuasive Technologies for Rural Health

    E-Print Network [OSTI]

    Ramachandran, Divya Lalitha

    2010-01-01T23:59:59.000Z

    the potential of mobile technologies to deliver healthmotivation for using mobile technology in this context, andfeatures of mobile technology could be advantageous for

  18. Addressing the needs of mobile users

    E-Print Network [OSTI]

    Sohn, Timothy Youngjin

    2008-01-01T23:59:59.000Z

    Based Localization Technology for Mobile Users . . . . . 3.1for designing future mobile technology. Methods There arefor ways future mobile technology might better address

  19. MOBILE-TERMINATED DATA User's Guide

    E-Print Network [OSTI]

    Ashley, Michael C. B.

    MOBILE-TERMINATED DATA User's Guide Iridium Satellite LLC Rev. 2; February 1, 2002 #12;MOBILE TERMINATED DATA................................................................................................................................3 1.1 IRIDIUM MOBILE TERMINATED DATA CONNECTIVITY

  20. Mobile systems capability plan

    SciTech Connect (OSTI)

    NONE

    1996-09-01T23:59:59.000Z

    This plan was prepared to initiate contracting for and deployment of these mobile system services. 102,000 cubic meters of retrievable, contact-handled TRU waste are stored at many sites around the country. Also, an estimated 38,000 cubic meters of TRU waste will be generated in the course of waste inventory workoff and continuing DOE operations. All the defense TRU waste is destined for disposal in WIPP near Carlsbad NM. To ship TRU waste there, sites must first certify that the waste meets WIPP waste acceptance criteria. The waste must be characterized, and if not acceptable, subjected to additional processing, including repackaging. Most sites plan to use existing fixed facilities or open new ones between FY1997-2006 to perform these functions; small-quantity sites lack this capability. An alternative to fixed facilities is the use of mobile systems mounted in trailers or skids, and transported to sites. Mobile systems will be used for all characterization and certification at small sites; large sites can also use them. The Carlsbad Area Office plans to pursue a strategy of privatization of mobile system services, since this offers a number of advantages. To indicate the possible magnitude of the costs of deploying mobile systems, preliminary estimates of equipment, maintenance, and operating costs over a 10-year period were prepared and options for purchase, lease, and privatization through fixed-price contracts considered.

  1. Power Control for Efficient Multicasting in IP-based 3G and beyond mobile Neophytos Vlotomas, Josephine Antoniou, George Hadjipollas, Vasos Vassiliou, Andreas

    E-Print Network [OSTI]

    Pitsillides, Andreas

    Power Control for Efficient Multicasting in IP-based 3G and beyond mobile networks Neophytos quality of service over the radio interface. Power Control is the mechanism responsible for keeping signal approaches for efficient power control in the case of multicast services for 3G and beyond mobile networks

  2. Vacuum chamber for ion manipulation device

    DOE Patents [OSTI]

    Chen, Tsung-Chi; Tang, Keqi; Ibrahim, Yehia M; Smith, Richard D; Anderson, Gordon A; Baker, Erin M

    2014-12-09T23:59:59.000Z

    An ion manipulation method and device is disclosed. The device includes a pair of substantially parallel surfaces. An array of inner electrodes is contained within, and extends substantially along the length of, each parallel surface. The device includes a first outer array of electrodes and a second outer array of electrodes. Each outer array of electrodes is positioned on either side of the inner electrodes, and is contained within and extends substantially along the length of each parallel surface. A DC voltage is applied to the first and second outer array of electrodes. A RF voltage, with a superimposed electric field, is applied to the inner electrodes by applying the DC voltages to each electrode. Ions either move between the parallel surfaces within an ion confinement area or along paths in the direction of the electric field, or can be trapped in the ion confinement area. A predetermined number of pairs of surfaces are disposed in one or more chambers, forming a multiple-layer ion mobility cyclotron device.

  3. Capillary interconnect device

    DOE Patents [OSTI]

    Renzi, Ronald F

    2013-11-19T23:59:59.000Z

    An interconnecting device for connecting a plurality of first fluid-bearing conduits to a corresponding plurality of second fluid-bearing conduits thereby providing fluid communication between the first fluid-bearing conduits and the second fluid-bearing conduits. The device includes a manifold and one or two ferrule plates that are held by compressive axial forces.

  4. Human-computer interface

    DOE Patents [OSTI]

    Anderson, Thomas G.

    2004-12-21T23:59:59.000Z

    The present invention provides a method of human-computer interfacing. Force feedback allows intuitive navigation and control near a boundary between regions in a computer-represented space. For example, the method allows a user to interact with a virtual craft, then push through the windshield of the craft to interact with the virtual world surrounding the craft. As another example, the method allows a user to feel transitions between different control domains of a computer representation of a space. The method can provide for force feedback that increases as a user's locus of interaction moves near a boundary, then perceptibly changes (e.g., abruptly drops or changes direction) when the boundary is traversed.

  5. Device for cutting protrusions

    DOE Patents [OSTI]

    Bzorgi, Fariborz M. (Knoxville, TN)

    2011-07-05T23:59:59.000Z

    An apparatus for clipping a protrusion of material is provided. The protrusion may, for example, be a bolt head, a nut, a rivet, a weld bead, or a temporary assembly alignment tab protruding from a substrate surface of assembled components. The apparatus typically includes a cleaver having a cleaving edge and a cutting blade having a cutting edge. Generally, a mounting structure configured to confine the cleaver and the cutting blade and permit a range of relative movement between the cleaving edge and the cutting edge is provided. Also typically included is a power device coupled to the cutting blade. The power device is configured to move the cutting edge toward the cleaving edge. In some embodiments the power device is activated by a momentary switch. A retraction device is also generally provided, where the retraction device is configured to move the cutting edge away from the cleaving edge.

  6. Fluidic nanotubes and devices

    DOE Patents [OSTI]

    Yang, Peidong (El Cerrito, CA); He, Rongrui (El Cerrito, CA); Goldberger, Joshua (Berkeley, CA); Fan, Rong (El Cerrito, CA); Wu, Yiying (Albany, CA); Li, Deyu (Albany, CA); Majumdar, Arun (Orinda, CA)

    2010-01-10T23:59:59.000Z

    Fluidic nanotube devices are described in which a hydrophilic, non-carbon nanotube, has its ends fluidly coupled to reservoirs. Source and drain contacts are connected to opposing ends of the nanotube, or within each reservoir near the opening of the nanotube. The passage of molecular species can be sensed by measuring current flow (source-drain, ionic, or combination). The tube interior can be functionalized by joining binding molecules so that different molecular species can be sensed by detecting current changes. The nanotube may be a semiconductor, wherein a tubular transistor is formed. A gate electrode can be attached between source and drain to control current flow and ionic flow. By way of example an electrophoretic array embodiment is described, integrating MEMs switches. A variety of applications are described, such as: nanopores, nanocapillary devices, nanoelectrophoretic, DNA sequence detectors, immunosensors, thermoelectric devices, photonic devices, nanoscale fluidic bioseparators, imaging devices, and so forth.

  7. Fluidic nanotubes and devices

    DOE Patents [OSTI]

    Yang, Peidong (Berkeley, CA); He, Rongrui (El Cerrito, CA); Goldberger, Joshua (Berkeley, CA); Fan, Rong (El Cerrito, CA); Wu, Yiying (Albany, CA); Li, Deyu (Albany, CA); Majumdar, Arun (Orinda, CA)

    2008-04-08T23:59:59.000Z

    Fluidic nanotube devices are described in which a hydrophilic, non-carbon nanotube, has its ends fluidly coupled to reservoirs. Source and drain contacts are connected to opposing ends of the nanotube, or within each reservoir near the opening of the nanotube. The passage of molecular species can be sensed by measuring current flow (source-drain, ionic, or combination). The tube interior can be functionalized by joining binding molecules so that different molecular species can be sensed by detecting current changes. The nanotube may be a semiconductor, wherein a tubular transistor is formed. A gate electrode can be attached between source and drain to control current flow and ionic flow. By way of example an electrophoretic array embodiment is described, integrating MEMs switches. A variety of applications are described, such as: nanopores, nanocapillary devices, nanoelectrophoretic, DNA sequence detectors, immunosensors, thermoelectric devices, photonic devices, nanoscale fluidic bioseparators, imaging devices, and so forth.

  8. Planar electrochemical device assembly

    DOE Patents [OSTI]

    Jacobson; Craig P. (Lafayette, CA), Visco; Steven J. (Berkeley, CA), De Jonghe; Lutgard C. (Lafayette, CA)

    2010-11-09T23:59:59.000Z

    A pre-fabricated electrochemical device having a dense electrolyte disposed between an anode and a cathode preferably deposited as thin films is bonded to a porous electrically conductive support. A second porous electrically conductive support may be bonded to a counter electrode of the electrochemical device. Multiple electrochemical devices may be bonded in parallel to a single porous support, such as a perforated sheet to provide a planar array. Planar arrays may be arranged in a stacked interconnected array. A method of making a supported electrochemical device is disclosed wherein the method includes a step of bonding a pre-fabricated electrochemical device layer to an existing porous metal or porous metal alloy layer.

  9. Planar electrochemical device assembly

    DOE Patents [OSTI]

    Jacobson, Craig P. (Lafayette, CA); Visco, Steven J. (Berkeley, CA); De Jonghe, Lutgard C. (Lafayette, CA)

    2007-06-19T23:59:59.000Z

    A pre-fabricated electrochemical device having a dense electrolyte disposed between an anode and a cathode preferably deposited as thin films is bonded to a porous electrically conductive support. A second porous electrically conductive support may be bonded to a counter electrode of the electrochemical device. Multiple electrochemical devices may be bonded in parallel to a single porous support, such as a perforated sheet to provide a planar array. Planar arrays may be arranged in a stacked interconnected array. A method of making a supported electrochemical device is disclosed wherein the method includes a step of bonding a pre-fabricated electrochemical device layer to an existing porous metal or porous metal alloy layer.

  10. Role of interfaces in deformation and fracture of ordered intermetallics

    SciTech Connect (OSTI)

    Yoo, M.H.; Fu, C.L.

    1996-12-31T23:59:59.000Z

    While sub- and grain-boundaries are the primary dislocation sources in Ll{sub 2} alloys, yield and flow stresses are strongly influenced by the multiplication and exhaustion of mobile dislocations from the secondary sources. The concept of enhanced microplasticity at grain boundaries due to chemical disordering is well supported by theoretical modeling, but no conclusive direct evidence exist for Ni{sub 3}Al bicrystals. The strong plastic anisotropy reported in TiAl PST (polysynthetically twinned) crystals is attributed in part to localized slip along lamellar interfaces, thus lowering the yield stress for soft orientations. Calculations of work of adhesion suggest that, intrinsically, interfacial cracking is more likely to initiate on {gamma}/{gamma}-type interfaces than on the {alpha}{sub 2}/{gamma} boundary. 70 refs, 5 tabs, 5 figs.

  11. Correlation ion mobility spectroscopy

    DOE Patents [OSTI]

    Pfeifer, Kent B. (Los Lunas, NM); Rohde, Steven B. (Corrales, NM)

    2008-08-26T23:59:59.000Z

    Correlation ion mobility spectrometry (CIMS) uses gating modulation and correlation signal processing to improve IMS instrument performance. Closely spaced ion peaks can be resolved by adding discriminating codes to the gate and matched filtering for the received ion current signal, thereby improving sensitivity and resolution of an ion mobility spectrometer. CIMS can be used to improve the signal-to-noise ratio even for transient chemical samples. CIMS is especially advantageous for small geometry IMS drift tubes that can otherwise have poor resolution due to their small size.

  12. Surface and Interface Control on Photochemically Initiated Immobilizat...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Interface Control on Photochemically Initiated Immobilization . Surface and Interface Control on Photochemically Initiated Immobilization . Abstract: Surface and interface...

  13. Webinar: Fuel Cell Mobile Lighting

    Broader source: Energy.gov [DOE]

    Video recording of the Fuel Cell Technologies Office webinar, Fuel Cell Mobile Lighting, originally presented on November 13, 2012.

  14. Environmental Technology Verification of Mobile Sources Control...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Environmental Technology Verification of Mobile Sources Control Technologies Environmental Technology Verification of Mobile Sources Control Technologies 2005 Diesel Engine...

  15. Rain sampling device

    DOE Patents [OSTI]

    Nelson, D.A.; Tomich, S.D.; Glover, D.W.; Allen, E.V.; Hales, J.M.; Dana, M.T.

    1991-05-14T23:59:59.000Z

    The present invention constitutes a rain sampling device adapted for independent operation at locations remote from the user which allows rainfall to be sampled in accordance with any schedule desired by the user. The rain sampling device includes a mechanism for directing wet precipitation into a chamber, a chamber for temporarily holding the precipitation during the process of collection, a valve mechanism for controllably releasing samples of the precipitation from the chamber, a means for distributing the samples released from the holding chamber into vessels adapted for permanently retaining these samples, and an electrical mechanism for regulating the operation of the device. 11 figures.

  16. Rain sampling device

    DOE Patents [OSTI]

    Nelson, Danny A. (Richland, WA); Tomich, Stanley D. (Richland, WA); Glover, Donald W. (Prosser, WA); Allen, Errol V. (Benton City, WA); Hales, Jeremy M. (Kennewick, WA); Dana, Marshall T. (Richland, WA)

    1991-01-01T23:59:59.000Z

    The present invention constitutes a rain sampling device adapted for independent operation at locations remote from the user which allows rainfall to be sampled in accordance with any schedule desired by the user. The rain sampling device includes a mechanism for directing wet precipitation into a chamber, a chamber for temporarily holding the precipitation during the process of collection, a valve mechanism for controllably releasing samples of said precipitation from said chamber, a means for distributing the samples released from the holding chamber into vessels adapted for permanently retaining these samples, and an electrical mechanism for regulating the operation of the device.

  17. A Preliminary Experimental Study on Haptic Teleoperation of Mobile Robot with Variable Force Feedback Gain

    E-Print Network [OSTI]

    Ryu, Jee-Hwan

    industrial constructions, etc. In all these application examples human-robot interfaces play the key role and its application for e-mail:ildar.info@gmail.com e-mail:jhryu@kut.ac.kr e-mail:robot@dgist.ac.kr O Y XA Preliminary Experimental Study on Haptic Teleoperation of Mobile Robot with Variable Force

  18. Energy consumption models for ad-hoc mobile Emmanuel Lochin1

    E-Print Network [OSTI]

    Lochin, Emmanuel

    1 Energy consumption models for ad-hoc mobile terminals Emmanuel Lochin1 Anne Fladenmuller1 Jean describes a set of experiments based on ACPI BIOS measurements which evaluate the energy consumption of an IEEE802.11 wireless net- work interface. Based on our ACPI measurements, two models of energy

  19. Route Duration in Mobile Ad hoc Networks Michael Pascoe*, Javier Gomez, Victor Rangel

    E-Print Network [OSTI]

    Gomez-Castellanos, Javier

    of Electrical Engineering National University of Mexico, Mexico City, Mexico Email: {michael to the limited transmission range of wireless network interfaces, multiple network interlinks or "hops" mayRoute Duration in Mobile Ad hoc Networks Michael Pascoe*, Javier Gomez, Victor Rangel Department

  20. Mobile lighting apparatus

    DOE Patents [OSTI]

    Roe, George Michael; Klebanoff, Leonard Elliott; Rea, Gerald W; Drake, Robert A; Johnson, Terry A; Wingert, Steven John; Damberger, Thomas A; Skradski, Thomas J; Radley, Christopher James; Oros, James M; Schuttinger, Paul G; Grupp, David J; Prey, Stephen Carl

    2013-05-14T23:59:59.000Z

    A mobile lighting apparatus includes a portable frame such as a moveable trailer or skid having a light tower thereon. The light tower is moveable from a stowed position to a deployed position. A hydrogen-powered fuel cell is located on the portable frame to provide electrical power to an array of the energy efficient lights located on the light tower.

  1. Unlocking the brain's mysteries: Meet the bioengineers behind next-generation neural devices

    ScienceCinema (OSTI)

    Pannu, Sat; Shah, Kedar; Tolosa, Vanessa; Tooker, Angela

    2015-02-20T23:59:59.000Z

    Bioengineers in the Neural Technologies Group at Lawrence Livermore are creating the next generation of clinical- and research-quality neural interfaces. The goal is to gain a fundamental understanding of neuroscience, treat a variety of debilitating neurological disorders (such as Parkinson's, depression, and epilepsy), and restore lost neural functions such as sight, hearing, and mobility.

  2. Unlocking the brain's mysteries: Meet the bioengineers behind next-generation neural devices

    SciTech Connect (OSTI)

    Pannu, Sat; Shah, Kedar; Tolosa, Vanessa; Tooker, Angela

    2014-10-02T23:59:59.000Z

    Bioengineers in the Neural Technologies Group at Lawrence Livermore are creating the next generation of clinical- and research-quality neural interfaces. The goal is to gain a fundamental understanding of neuroscience, treat a variety of debilitating neurological disorders (such as Parkinson's, depression, and epilepsy), and restore lost neural functions such as sight, hearing, and mobility.

  3. Wireless device monitoring systems and monitoring devices, and associated methods

    DOE Patents [OSTI]

    McCown, Steven H; Derr, Kurt W; Rohde, Kenneth W

    2014-05-27T23:59:59.000Z

    Wireless device monitoring systems and monitoring devices include a communications module for receiving wireless communications of a wireless device. Processing circuitry is coupled with the communications module and configured to process the wireless communications to determine whether the wireless device is authorized or unauthorized to be present at the monitored area based on identification information of the wireless device. Methods of monitoring for the presence and identity of wireless devices are also provided.

  4. CollageMachine: Model of ``Interface Ecology''

    E-Print Network [OSTI]

    Mohri, Mehryar

    CollageMachine: Model of ``Interface Ecology'' By Andruid Kerne dissertation submitted partial addresses browsing creatively, been co­developed with the metadisciplinary framework interface ecology, in addition inside them, open process without definite bounds. a metadiscipline, interface ecology brings

  5. Carbon Clusters as Possible Defects in the SiC-SiO2 Interface

    SciTech Connect (OSTI)

    Dang, Hongli [ORNL; Ramkumar, Gudipati [unknown; Yang, Liu [unknown; Li, Ying [ORNL; Peterson, Heather [unknown; Chisholm, Matthew F [ORNL; Biggerstaff, Trinity Leigh [ORNL; Duscher, Gerd [University of Tennessee, Knoxville (UTK); Wang, Sanwu [ORNL

    2009-01-01T23:59:59.000Z

    High state densities in the band gap of the SiC-SiO2 interface significantly reduce the channel mobilities in SiC-based high-temperature/high-power microelectronics. Investigations of the nature of the interface defects are thus of great importance. While several possible defects including very small carbon clusters with up to four carbon atoms have been identified by first-principles theory, larger carbon clusters as possible defects have attracted less attention. Here, we report first-principles quantum-mechanical calculations for two larger carbon clusters, the C10 ring and the C20 fullerence, in the SiC-SiO2 interface. We find that both carbon clusters introduce significant states in the band gap. The states extend over the entire band gap with higher densities in the upper half of the gap, thus accounting for some of the interface trap densities observed experimentally

  6. Multimaterial rectifying device fibers

    E-Print Network [OSTI]

    Orf, Nicholas D

    2009-01-01T23:59:59.000Z

    Electronic and optoelectronic device processing is commonly thought to be incompatible with much simpler thermal drawing techniques used in optical fiber production. The incorporation of metals, polymer insulators, and ...

  7. Mobile Monolith Polymer Elements For Flow Control In Microfluidic Systems

    DOE Patents [OSTI]

    Hasselbrink, Jr., Ernest F. (Saline, MI); Rehm, Jason E. (Alameda, CA); Shepodd, Timothy J. (Livermore, CA); Kirby, Brian J. (San Francisco, CA)

    2006-01-24T23:59:59.000Z

    A cast-in-place and lithographically shaped mobile, monolithic polymer element for fluid flow control in microfluidic devices and method of manufacture. Microfluid flow control devices, or microvalves that provide for control of fluid or ionic current flow can be made incorporating a cast-in-place, mobile monolithic polymer element, disposed within a microchannel, and driven by fluid pressure (either liquid or gas) against a retaining or sealing surface. The polymer elements are made by the application of lithographic methods to monomer mixtures formulated in such a way that the polymer will not bond to microchannel walls. The polymer elements can seal against pressures greater than 5000 psi, and have a response time on the order of milliseconds. By the use of energetic radiation it is possible to depolymerize selected regions of the polymer element to form shapes that cannot be produced by conventional lithographic patterning and would be impossible to machine.

  8. Electron Spectrometer: XPS with Laser Interface | EMSL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    with Laser Interface Electron Spectrometer: XPS with Laser Interface This ultrahigh vacuum machine can be applied as a routine means for analyzing the structure and chemical...

  9. Electronic security device

    DOE Patents [OSTI]

    Eschbach, Eugene A. (Richland, WA); LeBlanc, Edward J. (Kennewick, WA); Griffin, Jeffrey W. (Kennewick, WA)

    1992-01-01T23:59:59.000Z

    The present invention relates to a security device having a control box (12) containing an electronic system (50) and a communications loop (14) over which the system transmits a signal. The device is constructed so that the communications loop can extend from the control box across the boundary of a portal such as a door into a sealed enclosure into which access is restricted whereby the loop must be damaged or moved in order for an entry to be made into the enclosure. The device is adapted for detecting unauthorized entries into such enclosures such as rooms or containers and for recording the time at which such entries occur for later reference. Additionally, the device detects attempts to tamper or interfere with the operation of the device itself and records the time at which such events take place. In the preferred embodiment, the security device includes a microprocessor-based electronic system (50) and a detection module (72) capable of registering changes in the voltage and phase of the signal transmitted over the loop.

  10. Electronic security device

    DOE Patents [OSTI]

    Eschbach, E.A.; LeBlanc, E.J.; Griffin, J.W.

    1992-03-17T23:59:59.000Z

    The present invention relates to a security device having a control box containing an electronic system and a communications loop over which the system transmits a signal. The device is constructed so that the communications loop can extend from the control box across the boundary of a portal such as a door into a sealed enclosure into which access is restricted whereby the loop must be damaged or moved in order for an entry to be made into the enclosure. The device is adapted for detecting unauthorized entries into such enclosures such as rooms or containers and for recording the time at which such entries occur for later reference. Additionally, the device detects attempts to tamper or interfere with the operation of the device itself and records the time at which such events take place. In the preferred embodiment, the security device includes a microprocessor-based electronic system and a detection module capable of registering changes in the voltage and phase of the signal transmitted over the loop. 11 figs.

  11. Method for measuring the drift mobility in doped semiconductors

    DOE Patents [OSTI]

    Crandall, R.S.

    1982-03-09T23:59:59.000Z

    A method for measuring the drift mobility of majority carriers in semiconductors consists of measuring the current transient in a Schottky-barrier device following the termination of a forward bias pulse. An example is given using an amorphous silicon hydrogenated material doped with 0.2% phosphorus. The method is particularly useful with material in which the dielectric relaxation time is shorter than the carrier transit time. It is particularly useful in material useful in solar cells. 10 figs.

  12. Method for measuring the drift mobility in doped semiconductors

    DOE Patents [OSTI]

    Crandall, Richard S. (Princeton, NJ)

    1982-01-01T23:59:59.000Z

    A method for measuring the drift mobility of majority carriers in semiconductors consists of measuring the current transient in a Schottky-barrier device following the termination of a forward bias pulse. An example is given using an amorphous silicon hydrogenated material doped with 0.2% phosphorous. The method is particularly useful with material in which the dielectric relaxation time is shorter than the carrier transit time. It is particularly useful in material useful in solar cells.

  13. Cooperative system and method using mobile robots for testing a cooperative search controller

    DOE Patents [OSTI]

    Byrne, Raymond H. (Albuquerque, NM); Harrington, John J. (Albuquerque, NM); Eskridge, Steven E. (Albuquerque, NM); Hurtado, John E. (College Station, TX)

    2002-01-01T23:59:59.000Z

    A test system for testing a controller provides a way to use large numbers of miniature mobile robots to test a cooperative search controller in a test area, where each mobile robot has a sensor, a communication device, a processor, and a memory. A method of using a test system provides a way for testing a cooperative search controller using multiple robots sharing information and communicating over a communication network.

  14. Improving energy storage devices | EMSL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    energy storage devices Improving energy storage devices Released: April 15, 2014 Lithium-sulfur batteries last longer with nanomaterial-packed cathode A new PNNL-developed...

  15. First-principles study of compensation mechanisms in negatively charged LaGaO3/MgAl2O4 interfaces

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Rébola, Alejandro; Fong, Dillon D.; Eastman, Jeffrey A.; Ö?üt, Serdar; Zapol, Peter

    2013-06-01T23:59:59.000Z

    Thin film oxide heterostructures with a bound charge at the interface require electrical compensation, which can involve redistribution of mobile charge carriers. We explore a model LaGaO3(001)//MgAl2O4(001) heterostructure with nominally negatively charged interfaces using first-principles methods and a Poisson-Boltzmann equation. We find that charge compensation by oxygen vacancies with quadratically decaying concentration away from the interface is more favorable than electronic redistribution. These vacancies have a potential to enhance ionic conductivity along the interfaces.

  16. Interfacing to the Programmer's Apprentice

    E-Print Network [OSTI]

    Pitman, Kent

    In this paper, we discuss the design of a user interface to the Knowledge Based Editor (KBE), a prototype implementation of the Programmer's Apprentice. Although internally quite sophisticated, the KBE hides most of its ...

  17. General Relativity at an interface

    E-Print Network [OSTI]

    Juan G. Diaz Ochoa

    2006-08-19T23:59:59.000Z

    In this work a simple toy model for a free interface between bulk phases in space and time is presented, derived from the balance equations for extensive thermodynamic variables of Meinhold-Heerlein. In this case the free interface represents geodesics in the space-time, allowing the derivation of the Einstein's equations for gravitational fields. The effect of the balance equation is examined and a simple expression for cold dark matter is derived. The thermodynamically meaning of this model is also discussed.

  18. Mobility analysis tool based on the fundamental principle of conservation of energy.

    SciTech Connect (OSTI)

    Spletzer, Barry Louis; Nho, Hyuchul C.; Salton, Jonathan Robert

    2007-08-01T23:59:59.000Z

    In the past decade, a great deal of effort has been focused in research and development of versatile robotic ground vehicles without understanding their performance in a particular operating environment. As the usage of robotic ground vehicles for intelligence applications increases, understanding mobility of the vehicles becomes critical to increase the probability of their successful operations. This paper describes a framework based on conservation of energy to predict the maximum mobility of robotic ground vehicles over general terrain. The basis of the prediction is the difference between traction capability and energy loss at the vehicle-terrain interface. The mission success of a robotic ground vehicle is primarily a function of mobility. Mobility of a vehicle is defined as the overall capability of a vehicle to move from place to place while retaining its ability to perform its primary mission. A mobility analysis tool based on the fundamental principle of conservation of energy is described in this document. The tool is a graphical user interface application. The mobility analysis tool has been developed at Sandia National Laboratories, Albuquerque, NM. The tool is at an initial stage of development. In the future, the tool will be expanded to include all vehicles and terrain types.

  19. Mobile Biomass Pelletizing System

    SciTech Connect (OSTI)

    Thomas Mason

    2009-04-16T23:59:59.000Z

    This grant project examines multiple aspects of the pelletizing process to determine the feasibility of pelletizing biomass using a mobile form factor system. These aspects are: the automatic adjustment of the die height in a rotary-style pellet mill, the construction of the die head to allow the use of ceramic materials for extreme wear, integrating a heat exchanger network into the entire process from drying to cooling, the use of superheated steam for adjusting the moisture content to optimum, the economics of using diesel power to operate the system; a break-even analysis of estimated fixed operating costs vs. tons per hour capacity. Initial development work has created a viable mechanical model. The overall analysis of this model suggests that pelletizing can be economically done using a mobile platform.

  20. A demonstration mobility experiment

    E-Print Network [OSTI]

    Martin, Howard Lawrence

    1961-01-01T23:59:59.000Z

    among under graduate physics students in the field of solid-stats physics. Ths Shocklsy Haynes mobility experiment, presented in this thesis, was selected because it is considered an excellent means of gaining these objectives by giving sn...& constructive criticism& and patience throughout the long period required to complete the experismntl Dr& J ~ R ~ haynes, of Bell Laboratories, for informat'on on exper- imental procedure and sm&ross of semiconductor samplssl Bill Closssr of' the Sandia...

  1. Spectral tailoring device

    DOE Patents [OSTI]

    Brager, H.R.; Schenter, R.E.; Carter, L.L.; Karnesky, R.A.

    1987-08-05T23:59:59.000Z

    A spectral tailoring device for altering the neutron energy spectra and flux of neutrons in a fast reactor thereby selectively to enhance or inhibit the transmutation rate of a target metrical to form a product isotope. Neutron moderators, neutron filters, neutron absorbers and neutron reflectors may be used as spectral tailoring devices. Depending on the intended use for the device, a member from each of these four classes of materials could be used singularly, or in combination, to provide a preferred neutron energy spectra and flux of the neutrons in the region of the target material. In one embodiment of the invention, an assembly is provided for enhancing the production of isotopes, such as cobalt 60 and gadolinium 153. In another embodiment of the invention, a spectral tailoring device is disposed adjacent a target material which comprises long lived or volatile fission products and the device is used to shift the neutron energy spectra and flux of neutrons in the region of the fission products to preferentially transmute them to produce a less volatile fission product inventory. 6 figs.

  2. Electrical apparatus lockout device

    SciTech Connect (OSTI)

    Gonzales, Rick (Chesapeake, VA)

    1999-01-01T23:59:59.000Z

    A simple lockout device for electrical equipment equipped with recessed power blades is described. The device comprises a face-plate (12) having a threaded member (14) attached thereto and apertures suitable for accommodating the power blades of a piece of electrical equipment, an elastomeric nose (16) abutting the face-plate having a hole for passage of the threaded member therethrough and power blade apertures in registration with those of the face-plate, a block (20) having a recess (34) in its forward face for receiving at least a portion of the hose, a hole therein for receiving the threaded member and an integral extension (26) extending from its rear face. A thumb screw (22) suitable for turning with the hands and having internal threads suitable for engaging the threaded member attached to the face-plate is inserted into a passage in the integral extension to engage the threaded member in such a fashion that when the device is inserted over the recessed power blades of a piece of electrical equipment and the thumb screw (22) tightened, the elastomeric nose (16) is compressed between the face-plate (12) and the block (20) forcing it to expand laterally thereby securing the device in the recess and precluding the accidental or intentional energization of the piece of equipment by attachment of a power cord to the recessed power blades. Means are provided in the interval extension and the thumb screw for the attachment of a locking device (46) which will satisfy OSHA standards.

  3. Electrical apparatus lockout device

    SciTech Connect (OSTI)

    Gonzales, R.

    1999-10-12T23:59:59.000Z

    A simple lockout device for electrical equipment equipped with recessed power blades is described. The device comprises a face-plate (12) having a threaded member (14) attached thereto and apertures suitable for accommodating the power blades of a piece of electrical equipment, an elastomeric nose (16) abutting the face-plate having a hole for passage of the threaded member therethrough and power blade apertures in registration with those of the face-plate, a block (20) having a recess (34) in its forward face for receiving at least a portion of the hose, a hole therein for receiving the threaded member and an integral extension (26) extending from its rear face. A thumb screw (22) suitable for turning with the hands and having internal threads suitable for engaging the threaded member attached to the face-plate is inserted into a passage in the integral extension to engage the threaded member in such a fashion that when the device is inserted over the recessed power blades of a piece of electrical equipment and the thumb screw (22) tightened, the elastomeric nose (16) is compressed between the face-plate (12) and the block (20) forcing it to expand laterally thereby securing the device in the recess and precluding the accidental or intentional energization of the piece of equipment by attachment of a power cord to the recessed power blades. Means are provided in the interval extension and the thumb screw for the attachment of a locking device (46) which will satisfy OSHA standards.

  4. Characterization of nitrided silicon-silicon dioxide interfaces

    SciTech Connect (OSTI)

    Polignano, M.L.; Alessandri, M.; Brazzelli, D. [and others

    2000-07-01T23:59:59.000Z

    A newly-developed technique for the simultaneous characterization of the oxide-silicon interface properties and of bulk impurities was used for a systematic study of the nitridation process of thin oxides. This technique is based upon surface recombination velocity measurements, and does not require the formation of a capacitor structure, so it is very suitable for the characterization of as-grown interfaces. Oxides grown both in dry and in wet environments were considered, and nitridation processes in N{sub 2}O and in NO were compared to N{sub 2} annealing processes. The effect of nitridation temperature and duration were also studied, and RTO/RTN processes were compared to conventional furnace nitridation processes. Surface recombination velocity was correlated with nitrogen concentration at the oxide-silicon interface obtained by Secondary Ion Mass Spectroscopy (SIMS) measurements. Surface recombination velocity (hence surface state density) decreases with increasing nitrogen pile-up at the oxide-silicon interface, indicating that in nitrided interfaces surface state density is limited by nitridation. NO treatments are much more effective than N{sub 2}O treatments in the formation of nitrogen-rich interface layer and, as a consequence, in surface state reduction. Surface state density was measured in fully processed wafers before and after constant current stress. After a complete device process surface states are annealed out by hydrogen passivation, however they are reactivated by the electrical stress, and surface state results after stress were compared with data of surface recombination velocity in as-processed wafers.

  5. Transport, Interfaces, and Modeling in Amorphous Silicon Based Solar Cells: Final Technical Report, 11 February 2002 - 30 September 2006

    SciTech Connect (OSTI)

    Schiff, E. A.

    2008-10-01T23:59:59.000Z

    Results for a-Si characteristics/modeling; photocarrier drift mobilities in a-Si;H, ..mu..c-Si:H, CIGS; hole-conducting polymers as p-layer for a-Si and c-Si; IR spectra of p/i and n/i interfaces in a-Si.

  6. Nonaqueous Electrical Storage Device

    DOE Patents [OSTI]

    McEwen, Alan B. (Melrose, MA); Evans, David A. (Seekonk, MA); Blakley, Thomas J. (Woburn, MA); Goldman, Jay L. (Mansfield, MA)

    1999-10-26T23:59:59.000Z

    An electrochemical capacitor is disclosed that features two, separated, high surface area carbon cloth electrodes sandwiched between two current collectors fabricated of a conductive polymer having a flow temperature greater than 130.degree. C., the perimeter of the electrochemical capacitor being sealed with a high temperature gasket to form a single cell device. The gasket material is a thermoplastic stable at temperatures greater than 100.degree. C., preferably a polyester or a polyurethane, and having a reflow temperature above 130.degree. C. but below the softening temperature of the current collector material. The capacitor packaging has good mechanical integrity over a wide temperature range, contributes little to the device equivalent series resistance (ESR), and is stable at high potentials. In addition, the packaging is designed to be easily manufacturable by assembly line methods. The individual cells can be stacked in parallel or series configuration to reach the desired device voltage and capacitance.

  7. Pendulum detector testing device

    DOE Patents [OSTI]

    Gonsalves, John M. (Modesto, CA)

    1997-01-01T23:59:59.000Z

    A detector testing device which provides consistent, cost-effective, repeatable results. The testing device is primarily constructed of PVC plastic and other non-metallic materials. Sensitivity of a walk-through detector system can be checked by: 1) providing a standard test object simulating the mass, size and material content of a weapon or other contraband, 2) suspending the test object in successive positions, such as head, waist and ankle levels, simulating where the contraband might be concealed on a person walking through the detector system; and 3) swinging the suspended object through each of the positions, while operating the detector system and observing its response. The test object is retained in a holder in which the orientation of the test device or target can be readily changed, to properly complete the testing requirements.

  8. Regenerative combustion device

    DOE Patents [OSTI]

    West, Phillip B.

    2004-03-16T23:59:59.000Z

    A regenerative combustion device having a combustion zone, and chemicals contained within the combustion zone, such as water, having a first equilibrium state, and a second combustible state. Means for transforming the chemicals from the first equilibrium state to the second combustible state, such as electrodes, are disposed within the chemicals. An igniter, such as a spark plug or similar device, is disposed within the combustion zone for igniting combustion of the chemicals in the second combustible state. The combustion products are contained within the combustion zone, and the chemicals are selected such that the combustion products naturally chemically revert into the chemicals in the first equilibrium state following combustion. The combustion device may thus be repeatedly reused, requiring only a brief wait after each ignition to allow the regeneration of combustible gasses within the head space.

  9. Ion manipulation device

    DOE Patents [OSTI]

    Anderson, Gordon A; Smith, Richard D; Ibrahim, Yehia M; Baker, Erin M

    2014-09-16T23:59:59.000Z

    An ion manipulation method and device is disclosed. The device includes a pair of substantially parallel surfaces. An array of inner electrodes is contained within, and extends substantially along the length of, each parallel surface. The device includes a first outer array of electrodes and a second outer array of electrodes. Each outer array of electrodes is positioned on either side of the inner electrodes, and is contained within and extends substantially along the length of each parallel surface. A DC voltage is applied to the first and second outer array of electrodes. A RF voltage, with a superimposed electric field, is applied to the inner electrodes by applying the DC voltages to each electrode. Ions either move between the parallel surfaces within an ion confinement area or along paths in the direction of the electric field, or can be trapped in the ion confinement area.

  10. Fragment capture device

    DOE Patents [OSTI]

    Payne, Lloyd R. (Los Lunas, NM); Cole, David L. (Albuquerque, NM)

    2010-03-30T23:59:59.000Z

    A fragment capture device for use in explosive containment. The device comprises an assembly of at least two rows of bars positioned to eliminate line-of-sight trajectories between the generation point of fragments and a surrounding containment vessel or asset. The device comprises an array of at least two rows of bars, wherein each row is staggered with respect to the adjacent row, and wherein a lateral dimension of each bar and a relative position of each bar in combination provides blockage of a straight-line passage of a solid fragment through the adjacent rows of bars, wherein a generation point of the solid fragment is located within a cavity at least partially enclosed by the array of bars.

  11. Biochip scanner device

    DOE Patents [OSTI]

    Perov, Alexander (Troitsk, RU); Belgovskiy, Alexander I. (Mayfield Heights, OH); Mirzabekov, Andrei D. (Darien, IL)

    2001-01-01T23:59:59.000Z

    A biochip scanner device used to detect and acquire fluorescence signal data from biological microchips or biochips and method of use are provided. The biochip scanner device includes a laser for emitting a laser beam. A modulator, such as an optical chopper modulates the laser beam. A scanning head receives the modulated laser beam and a scanning mechanics coupled to the scanning head moves the scanning head relative to the biochip. An optical fiber delivers the modulated laser beam to the scanning head. The scanning head collects the fluorescence light from the biochip, launches it into the same optical fiber, which delivers the fluorescence into a photodetector, such as a photodiode. The biochip scanner device is used in a row scanning method to scan selected rows of the biochip with the laser beam size matching the size of the immobilization site.

  12. Electrochromic optical switching device

    DOE Patents [OSTI]

    Lampert, C.M.; Visco, S.J.

    1992-08-25T23:59:59.000Z

    An electrochromic cell is disclosed which comprises an electrochromic layer, a polymerizable organo-sulfur layer which comprises the counter electrode of the structure, and an ionically conductive electronically insulating material which comprises the separator between the electrodes. In a preferred embodiment, both the separator and the organo-sulfur electrode (in both its charged and uncharged states) are transparent either to visible light or to the entire solar spectrum. An electrochromic device is disclosed which comprises such electrodes and separator encased in glass plates on the inner surface of each of which is formed a transparent electrically conductive film in respective electrical contact with the electrodes which facilitates formation of an external electrical connection or contact to the electrodes of the device to permit electrical connection of the device to an external potential source. 3 figs.

  13. Pendulum detector testing device

    DOE Patents [OSTI]

    Gonsalves, J.M.

    1997-09-30T23:59:59.000Z

    A detector testing device is described which provides consistent, cost-effective, repeatable results. The testing device is primarily constructed of PVC plastic and other non-metallic materials. Sensitivity of a walk-through detector system can be checked by: (1) providing a standard test object simulating the mass, size and material content of a weapon or other contraband, (2) suspending the test object in successive positions, such as head, waist and ankle levels, simulating where the contraband might be concealed on a person walking through the detector system; and (3) swinging the suspended object through each of the positions, while operating the detector system and observing its response. The test object is retained in a holder in which the orientation of the test device or target can be readily changed, to properly complete the testing requirements. 5 figs.

  14. Electrochromic optical switching device

    SciTech Connect (OSTI)

    Lampert, Carl M. (El Sobrante, CA); Visco, Steven J. (Berkeley, CA)

    1992-01-01T23:59:59.000Z

    An electrochromic cell is disclosed which comprises an electrochromic layer, a polymerizable organo-sulfur layer which comprises the counter electrode of the structure, and an ionically conductive electronically insulating material which comprises the separator between the electrodes. In a preferred embodiment, both the separator and the organo-sulfur electrode (in both its charged and uncharged states) are transparent either to visible light or to the entire solar spectrum. An electrochromic device is disclosed which comprises such electrodes and separator encased in glass plates on the inner surface of each of which is formed a transparent electrically conductive film in respective electrical contact with the electrodes which facilitates formation of an external electrical connection or contact to the electrodes of the device to permit electrical connection of the device to an external potential source.

  15. Graphene field emission devices

    SciTech Connect (OSTI)

    Kumar, S., E-mail: shishirk@gmail.com; Raghavan, S. [Centre for Nanoscience and Engineering, Indian Institute of Science, Bengaluru (India); Duesberg, G. S. [Centre for Research on Adaptive Nanostructures and Nanodevices (CRANN) and School of Chemistry, Trinity College Dublin, Dublin, D2 (Ireland); Pratap, R. [Centre for Nanoscience and Engineering, Indian Institute of Science, Bengaluru (India); Department of Mechanical Engineering, Indian Institute of Science, Bengaluru (India)

    2014-09-08T23:59:59.000Z

    Graphene field emission devices are fabricated using a scalable process. The field enhancement factors, determined from the Fowler-Nordheim plots, are within few hundreds and match the theoretical predictions. The devices show high emission current density of ?10?nA ?m{sup ?1} at modest voltages of tens of volts. The emission is stable with time and repeatable over long term, whereas the noise in the emission current is comparable to that from individual carbon nanotubes emitting under similar conditions. We demonstrate a power law dependence of emission current on pressure which can be utilized for sensing. The excellent characteristics and relative ease of making the devices promise their great potential for sensing and electronic applications.

  16. M.J. Smith and G. Salvendy (Eds.): Human Interface, Part I, HCII 2009, LNCS 5617, pp. 628637, 2009. Springer-Verlag Berlin Heidelberg 2009

    E-Print Network [OSTI]

    Tachi, Susumu

    intelligent human-computer interaction, is a well-established research area that deals with inves- tigationM.J. Smith and G. Salvendy (Eds.): Human Interface, Part I, HCII 2009, LNCS 5617, pp. 628­637, 2009, affective user interface, wearable devices. 1 Introduction "All emotions use the body as their theater

  17. Phononic crystal devices

    DOE Patents [OSTI]

    El-Kady, Ihab F. (Albuquerque, NM); Olsson, Roy H. (Albuquerque, NM)

    2012-01-10T23:59:59.000Z

    Phononic crystals that have the ability to modify and control the thermal black body phonon distribution and the phonon component of heat transport in a solid. In particular, the thermal conductivity and heat capacity can be modified by altering the phonon density of states in a phononic crystal. The present invention is directed to phononic crystal devices and materials such as radio frequency (RF) tags powered from ambient heat, dielectrics with extremely low thermal conductivity, thermoelectric materials with a higher ratio of electrical-to-thermal conductivity, materials with phononically engineered heat capacity, phononic crystal waveguides that enable accelerated cooling, and a variety of low temperature application devices.

  18. Dielectrophoretic columnar focusing device

    DOE Patents [OSTI]

    James, Conrad D. (Albuquerque, NM); Galambos, Paul C. (Albuquerque, NM); Derzon, Mark S. (Tijeras, NM)

    2010-05-11T23:59:59.000Z

    A dielectrophoretic columnar focusing device uses interdigitated microelectrodes to provide a spatially non-uniform electric field in a fluid that generates a dipole within particles in the fluid. The electric field causes the particles to either be attracted to or repelled from regions where the electric field gradient is large, depending on whether the particles are more or less polarizable than the fluid. The particles can thereby be forced into well defined stable paths along the interdigitated microelectrodes. The device can be used for flow cytometry, particle control, and other process applications, including cell counting or other types of particle counting, and for separations in material control.

  19. A 2D Graphics Interface Based on CGI Version 1.0

    E-Print Network [OSTI]

    Clausen, Michael

    ) standards for device independent driving of graphics hardware, both issued from standardization institutes#12; CGI ++ A 2D Graphics Interface Based on CGI Version 1.0 Dieter W. Fellner Martin Fischer Currently, designers of 2D graphics applications have to deal with several (and unfor­ tunately incompatible

  20. In Proceedings of Ubicomp 2005, Tokyo, Japan Fast And Robust Interface Generation for

    E-Print Network [OSTI]

    Gajos, Krzysztof

    Applications Krzysztof Gajos, David Christianson, Raphael Hoffmann, Tal Shaked, Kiera Henning, Jing Jing Long models of the interface and desired hardware device and Supple uses decision-theoretic optimization and describes key extensions that barred the previous ver- sion (reported in [3]) from practical application

  1. Materials physics and device development for improved efficiency of GaN HEMT high power amplifiers.

    SciTech Connect (OSTI)

    Kurtz, Steven Ross; Follstaedt, David Martin; Wright, Alan Francis; Baca, Albert G.; Briggs, Ronald D.; Provencio, Paula Polyak; Missert, Nancy A.; Allerman, Andrew Alan; Marsh, Phil F.; Koleske, Daniel David; Lee, Stephen Roger; Shul, Randy John; Seager, Carleton Hoover; Tigges, Christopher P.

    2005-12-01T23:59:59.000Z

    GaN-based microwave power amplifiers have been identified as critical components in Sandia's next generation micro-Synthetic-Aperture-Radar (SAR) operating at X-band and Ku-band (10-18 GHz). To miniaturize SAR, GaN-based amplifiers are necessary to replace bulky traveling wave tubes. Specifically, for micro-SAR development, highly reliable GaN high electron mobility transistors (HEMTs), which have delivered a factor of 10 times improvement in power performance compared to GaAs, need to be developed. Despite the great promise of GaN HEMTs, problems associated with nitride materials growth currently limit gain, linearity, power-added-efficiency, reproducibility, and reliability. These material quality issues are primarily due to heteroepitaxial growth of GaN on lattice mismatched substrates. Because SiC provides the best lattice match and thermal conductivity, SiC is currently the substrate of choice for GaN-based microwave amplifiers. Obviously for GaN-based HEMTs to fully realize their tremendous promise, several challenges related to GaN heteroepitaxy on SiC must be solved. For this LDRD, we conducted a concerted effort to resolve materials issues through in-depth research on GaN/AlGaN growth on SiC. Repeatable growth processes were developed which enabled basic studies of these device layers as well as full fabrication of microwave amplifiers. Detailed studies of the GaN and AlGaN growth of SiC were conducted and techniques to measure the structural and electrical properties of the layers were developed. Problems that limit device performance were investigated, including electron traps, dislocations, the quality of semi-insulating GaN, the GaN/AlGaN interface roughness, and surface pinning of the AlGaN gate. Surface charge was reduced by developing silicon nitride passivation. Constant feedback between material properties, physical understanding, and device performance enabled rapid progress which eventually led to the successful fabrication of state of the art HEMT transistors and amplifiers.

  2. Hybrid user interfaces : design guidelines and implementation examples

    E-Print Network [OSTI]

    Ahn, Sehyun

    2006-01-01T23:59:59.000Z

    A hybrid user interface is a new type of computer user interface that achieves high usability by combining features of graphical user interfaces and command line interfaces. The main goal of a hybrid user interface is to ...

  3. Band gap engineering at a semiconductor - crystalline oxide interface

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Moghadam, Jahangir-Moghadam; Shen, Xuan; Chrysler, Matthew; Ahmadi-Majlan, Kamyar; Su, Dong; Ngai, Joseph H.

    2015-03-01T23:59:59.000Z

    The epitaxial growth of crystalline oxides on semiconductors provides a pathway to introduce new functionalities to semiconductor devices. Key to integrating the functionalities of oxides onto semiconductors is controlling the band alignment at interfaces between the two materials. Here we apply principles of band gap engineering traditionally used at heterojunctions between conventional semiconductors to control the band offset between a single crystalline oxide and a semiconductor. Reactive molecular beam epitaxy is used to realize atomically abrupt and structurally coherent interfaces between SrZrxTi1-xO? and Ge, in which the band gap of the former is enhanced with Zr content x. We presentmore »structural and electrical characterization of SrZrxTi1-xO?-Ge heterojunctions and demonstrate a type-I band offset can be achieved. These results demonstrate that band gap engineering can be exploited to realize functional semiconductor crystalline oxide heterojunctions.« less

  4. Graphical user interface for image acquisition and processing

    DOE Patents [OSTI]

    Goldberg, Kenneth A. (Berkeley, CA)

    2002-01-01T23:59:59.000Z

    An event-driven GUI-based image acquisition interface for the IDL programming environment designed for CCD camera control and image acquisition directly into the IDL environment where image manipulation and data analysis can be performed, and a toolbox of real-time analysis applications. Running the image acquisition hardware directly from IDL removes the necessity of first saving images in one program and then importing the data into IDL for analysis in a second step. Bringing the data directly into IDL creates an opportunity for the implementation of IDL image processing and display functions in real-time. program allows control over the available charge coupled device (CCD) detector parameters, data acquisition, file saving and loading, and image manipulation and processing, all from within IDL. The program is built using IDL's widget libraries to control the on-screen display and user interface.

  5. Effects of Interface Disorder on Valley Splitting in SiGe/Si/SiGe Quantum Wells

    E-Print Network [OSTI]

    Zhengping Jiang; Neerav Kharche; Timothy Boykin; Gerhard Klimeck

    2012-03-06T23:59:59.000Z

    A sharp potential barrier at the Si/SiGe interface introduces valley splitting (VS), which lifts the 2-fold valley degeneracy in strained SiGe/Si/SiGe quantum wells (QWs). This work examines in detail the effects of Si/SiGe interface disorder on the VS in an atomistic tight binding approach based on statistical sampling. VS is analyzed as a function of electric field, QW thickness, and simulation domain size. Strong electric fields push the electron wavefunctions into the SiGe buffer and introduce significant VS fluctuations from device to device. A Gedankenexperiment with ordered alloys sheds light on the importance of different bonding configurations on VS. We conclude that a single SiGe band offset and effective mass cannot comprehend the complex Si/SiGe interface interactions that dominate VS.

  6. Effects of Interface Disorder on Valley Splitting in SiGe/Si/SiGe Quantum Wells

    E-Print Network [OSTI]

    Jiang, Zhengping; Boykin, Timothy; Klimeck, Gerhard

    2011-01-01T23:59:59.000Z

    A sharp potential barrier at the Si/SiGe interface introduces valley splitting (VS), which lifts the 2-fold valley degeneracy in strained SiGe/Si/SiGe quantum wells (QWs). This work examines in detail the effects of Si/SiGe interface disorder on the VS in an atomistic tight binding approach based on statistical sampling. VS is analyzed as a function of electric field, QW thickness, and simulation domain size. Strong electric fields push the electron wavefunctions into the SiGe buffer and introduce significant VS fluctuations from device to device. A Gedankenexperiment with ordered alloys sheds light on the importance of different bonding configurations on VS. We conclude that a single SiGe band offset and effective mass cannot comprehend the complex Si/SiGe interface interactions that dominate VS.

  7. Engineering of silicon/HfO{sub 2} interface by variable energy proton irradiation

    SciTech Connect (OSTI)

    Maurya, Savita, E-mail: mauryasavita5@gmail.com; Maringanti, Radhakrishna [Division of Electronics and Microelectronics, Indian Institute of Information Technology, Allahabad, Uttar Pradesh 211012 (India); Tribedi, L. C. [DNAP, Tata Institute of Fundamental Research, Mumbai, Maharashtra 400005 (India)

    2014-08-18T23:59:59.000Z

    Surfaces and interfaces between materials are of paramount importance for various phenomena, such as painting a house, catalyst driven chemical reactions, intricate life processes, corrosion of materials, and fabrication of various semiconductor devices. Interface of silicon or other such substrates with any of the oxides has profound effect on the performance of metal oxide field effect transistors and other similar devices. Since a surface is an abrupt termination of a periodic crystal, surface atoms will have some unsaturated valence electrons and these unsaturated bonds at the semiconductor surface make it chemically highly reactive. Other than annealing, there is not much that can be done to manage these unsaturated bonds. This study was initiated to explore the possibility of repairing these unsaturated dangling bonds that are formed at the silicon and oxide interface during the deposition of oxide layer above silicon, by the use of proton irradiation. In order to improve the interface characteristics, we present a method to modify the interface of silicon and hafnium dioxide after its fabrication, through proton irradiation. Results of the study are promising and probably this method might be used along with other methods such as annealing to modify the interface, after its fabrication.

  8. Mobile Phones Digital Cameras

    E-Print Network [OSTI]

    Suslick, Kenneth S.

    Journal 6 issues of Expert Analysis Save 50% - Subscribe now. www.worldaffairsjournal.org International safety technology Page 1 of 10Airport Security to Get New Scanning Device that Detects Shoe Bombs of the American Chemical Society." "To create the sensor array, the researchers a series of 16 tiny colored dots

  9. Mobile applications for cities

    E-Print Network [OSTI]

    Yen, Mark J

    2012-01-01T23:59:59.000Z

    A smartphone user today carries around in his or her pocket more computing power than all of NASA had when it sent a man to the moon in 1969 (Miller, 2012). These devices allow us to extend our sense of our surroundings ...

  10. MOBILE AGENT MANAGEMENT Patricia Cuesta Rivalta

    E-Print Network [OSTI]

    MOBILE AGENT MANAGEMENT By Patricia Cuesta Rivalta A Thesis Submitted to the Faculty of Graduate to Faculty of Graduate Studies and Research acceptance of this thesis MOBILE AGENT MANAGEMENT Submitted with the mobile agent technology. This thesis extends the Mobile Code Toolkit of the Perpetuum Mobile Procura

  11. Condensate removal device

    DOE Patents [OSTI]

    Maddox, James W. (Newport News, VA); Berger, David D. (Alexandria, VA)

    1984-01-01T23:59:59.000Z

    A condensate removal device is disclosed which incorporates a strainer in unit with an orifice. The strainer is cylindrical with its longitudinal axis transverse to that of the vapor conduit in which it is mounted. The orifice is positioned inside the strainer proximate the end which is remoter from the vapor conduit.

  12. Solar Innovator | Alta Devices

    ScienceCinema (OSTI)

    Mattos, Laila; Le, Minh

    2013-05-29T23:59:59.000Z

    Selected to participate in the Energy Department's SunShot Initiative, Alta Devices produces solar cells that convert sunlight into electricity at world record-breaking levels of efficiency. Through its innovative solar technology Alta is helping bring down the cost of solar. Learn more about the Energy Department's efforts to advance solar technology at energy.gov/solar .

  13. Device Oriented Project Controller

    SciTech Connect (OSTI)

    Dalesio, Leo; Kraimer, Martin

    2013-11-20T23:59:59.000Z

    This proposal is directed at the issue of developing control systems for very large HEP projects. A de-facto standard in accelerator control is the Experimental Physics and Industrial Control System (EPICS), which has been applied successfully to many physics projects. EPICS is a channel based system that requires that each channel of each device be configured and controlled. In Phase I, the feasibility of a device oriented extension to the distributed channel database was demonstrated by prototyping a device aware version of an EPICS I/O controller that functions with the current version of the channel access communication protocol. Extensions have been made to the grammar to define the database. Only a multi-stage position controller with limit switches was developed in the demonstration, but the grammar should support a full range of functional record types. In phase II, a full set of record types will be developed to support all existing record types, a set of process control functions for closed loop control, and support for experimental beam line control. A tool to configure these records will be developed. A communication protocol will be developed or extensions will be made to Channel Access to support introspection of components of a device. Performance bench marks will be made on both communication protocol and the database. After these records and performance tests are under way, a second of the grammar will be undertaken.

  14. Multiple gap photovoltaic device

    DOE Patents [OSTI]

    Dalal, Vikram L. (Newark, DE)

    1981-01-01T23:59:59.000Z

    A multiple gap photovoltaic device having a transparent electrical contact adjacent a first cell which in turn is adjacent a second cell on an opaque electrical contact, includes utilizing an amorphous semiconductor as the first cell and a crystalline semiconductor as the second cell.

  15. Cascaded thermoacoustic devices

    DOE Patents [OSTI]

    Swift, Gregory W.; Backhaus, Scott N.; Gardner, David L.

    2003-12-09T23:59:59.000Z

    A thermoacoustic device is formed with a resonator system defining at least one region of high specific acoustic impedance in an acoustic wave within the resonator system. A plurality of thermoacoustic units are cascaded together within the region of high specific acoustic impedance, where at least one of the thermoacoustic units is a regenerator unit.

  16. Liquid mixing device

    SciTech Connect (OSTI)

    O'Leary, R. P.

    1985-08-06T23:59:59.000Z

    A mixing device for mixing at least two liquids to produce a homogenous mixture. The device includes an elongated chamber in which a vertically oriented elongated mixing cavity is located. The cavity is sealed at its lower end and it is open at its upper end and in communication with the interior of the chamber. An elongated conduit extends the length of the cavity and is adapted to receive liquids to be mixed. The conduit includes a plurality of ports located at longitudinally spaced positions therealong and which ports are directed in different directions. The ports create plural streams of liquid which interact and mix with one another within the cavity. The mixed liquids overflow the cavity and out its top end into the chamber 24. The chamber 24 includes an outlet from which the mixed liquids are withdrawn. In accordance with the preferred embodiment gas eductor means are provided in the inlet to the conduit to introduce gas bubbles within the cavity. Gas vent means are also provided in the device to vent any introduced gases from the device so that only the mixed liquids flow out the outlet.

  17. Parasitic mobility for sensate media

    E-Print Network [OSTI]

    Laibowitz, Matthew Joel, 1975-

    2004-01-01T23:59:59.000Z

    Distributed sensor networks offer many new capabilities for monitoring environments with applicability to medical, industrial, military, anthropological, and experiential fields. By making such systems mobile, we increase ...

  18. MobileMatch App

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated Codes |IsLove Your1 SECTION A. Revised:7,AMissionMobileMatch VolunteerMatch

  19. Multi-robot control interface

    DOE Patents [OSTI]

    Bruemmer, David J. (Idaho Falls, ID); Walton, Miles C. (Idaho Falls, ID)

    2011-12-06T23:59:59.000Z

    Methods and systems for controlling a plurality of robots through a single user interface include at least one robot display window for each of the plurality of robots with the at least one robot display window illustrating one or more conditions of a respective one of the plurality of robots. The user interface further includes at least one robot control window for each of the plurality of robots with the at least one robot control window configured to receive one or more commands for sending to the respective one of the plurality of robots. The user interface further includes a multi-robot common window comprised of information received from each of the plurality of robots.

  20. MobilityFirst: A Robust and Trustworthy Mobility-Centric

    E-Print Network [OSTI]

    . Seskar, K. Nagaraja, S. Nelson S. Bannerjee W. Lehr Z. Morley Mao B. Ramamurthy G. Chen X. Yang, R. Roy ~2B servers/PC's, ~10B notebooks, PDA's, smart phones, sensors ~2010 ~2020 Wireles s Edge Networ k: Near-term "mobile Internet" usage scenario ­ Mobile P2P and Infostations P2P and Infostations (DTN

  1. The Requirements for Personal Mobile Assistants in a Mobile

    E-Print Network [OSTI]

    Huhns, Michael N.

    : information filtering and retrieving, scheduling meetings, mail management, etc. These agents act as PersonalThe Requirements for Personal Mobile Assistants in a Mobile Telecommunications Environment Barcin. The unique demands and needs of each user will require assistants that are customized or personalized

  2. Zero-point fluctuations in rotation: Perpetuum mobile of the fourth kind without energy transfer

    E-Print Network [OSTI]

    M. N. Chernodub

    2013-02-03T23:59:59.000Z

    We discuss a simple Casimir-type device for which the rotational energy reaches its global minimum when the device rotates about a certain axis rather than remains static. This unusual property is a direct consequence of the fact that the moment of inertia of zero-point vacuum fluctuations is a negative quantity (the rotational vacuum effect). Moreover, the device does not produce any work despite the fact that its equilibrium ground state corresponds to a permanent rotation. Counterintuitively, the device has no internally moving mechanical parts while its very existence is consistent with the laws of thermodynamics. We point out that such devices may possibly be constructed using carbon nanotubes. We call this "zero-point-driven" device as the perpetuum mobile of the fourth kind.

  3. Fluorescent fluid interface position sensor

    DOE Patents [OSTI]

    Weiss, Jonathan D.

    2004-02-17T23:59:59.000Z

    A new fluid interface position sensor has been developed, which is capable of optically determining the location of an interface between an upper fluid and a lower fluid, the upper fluid having a larger refractive index than a lower fluid. The sensor functions by measurement, of fluorescence excited by an optical pump beam which is confined within a fluorescent waveguide where that waveguide is in optical contact with the lower fluid, but escapes from the fluorescent waveguide where that waveguide is in optical contact with the upper fluid.

  4. User interfaces to expert systems

    SciTech Connect (OSTI)

    Agarwal, A.; Emrich, M.L.

    1988-10-01T23:59:59.000Z

    Expert Systems are becoming increasingly popular in environments where the user is not well versed in computers or the subject domain. They offer expert advice and can also explain their lines of reasoning. As these systems are applied to highly technical areas, they become complex and large. Therefore, User Systems Interfaces (USIs) become critical. This paper discusses recent technologies that can be applied to improved user communication. In particular, bar menus/graphics, mouse interfaces, touch screens, and voice links will be highlighted. Their applications in the context of SOFTMAN (The Software Manager Apprentice) a knowledge-based system are discussed. 18 refs., 2 figs.

  5. Technique for converting non-conforming hexahedral-to-hexahedral interfaces into conforming interfaces

    DOE Patents [OSTI]

    Staten, Matthew L.; Shepherd, Jason F.; Ledoux, Frank; Shimada, Kenji; Merkley, Karl G.; Carbonera, Carlos

    2013-03-05T23:59:59.000Z

    A technique for conforming an interface between a first mesh and a second mesh is disclosed. A first interface surface in the first mesh and a second interface surface in the second mesh residing along the interface are identified. The first and second interface surfaces are initially non-conforming along the interface. Chords within the first and second interface surfaces that fall within a threshold separation distance of each other are paired. Sheets having chords that reside within the first or second interface surfaces are recursively inserted into or extracted from one or both of the first and second meshes until all remaining chords within the first interface surface are paired with corresponding chords in the second interface surface and all remaining chords within the second interface surface are paired with corresponding chords in the first interface surface.

  6. Interface Compilation: Steps toward Compiling Program Interfaces as Languages

    E-Print Network [OSTI]

    Engler, Dawson

    systems, programmers are limited to writing code, while the power to transform the code has been reserved Magik gives to programmers enables a broad class of optimization and code transformations. This paper's data structures and internally), operations on this state (defined by the interface's procedures

  7. Propagation of misfit dislocations from buffer/Si interface into Si

    DOE Patents [OSTI]

    Liliental-Weber, Zuzanna (El Sobrante, CA); Maltez, Rogerio Luis (Porto Alegre, BR); Morkoc, Hadis (Richmond, VA); Xie, Jinqiao (Raleigh, VA)

    2011-08-30T23:59:59.000Z

    Misfit dislocations are redirected from the buffer/Si interface and propagated to the Si substrate due to the formation of bubbles in the substrate. The buffer layer growth process is generally a thermal process that also accomplishes annealing of the Si substrate so that bubbles of the implanted ion species are formed in the Si at an appropriate distance from the buffer/Si interface so that the bubbles will not migrate to the Si surface during annealing, but are close enough to the interface so that a strain field around the bubbles will be sensed by dislocations at the buffer/Si interface and dislocations are attracted by the strain field caused by the bubbles and move into the Si substrate instead of into the buffer epi-layer. Fabrication of improved integrated devices based on GaN and Si, such as continuous wave (CW) lasers and light emitting diodes, at reduced cost is thereby enabled.

  8. Spin Coated Plasmonic Nanoparticle Interfaces for Photocurrent Enhancement in Thin Film Si Solar Cells

    E-Print Network [OSTI]

    Israelowitz, Miriam; Cong, Tao; Sureshkumar, Radhakrishna

    2013-01-01T23:59:59.000Z

    Nanoparticle (NP) arrays of noble metals strongly absorb light in the visible to infrared wavelengths through resonant interactions between the incident electromagnetic field and the metal's free electron plasma. Such plasmonic interfaces enhance light absorption and photocurrent in solar cells. We report a cost effective and scalable room temperature/pressure spin-coating route to fabricate broadband plasmonic interfaces consisting of silver NPs. The NP interface yields photocurrent enhancement (PE) in thin film silicon devices by up to 200% which is significantly greater than previously reported values. For coatings produced from Ag nanoink containing particles with average diameter of 40 nm, an optimal NP surface coverage of 7% was observed. Scanning electron microscopy of interface morphologies revealed that for low surface coverage, particles are well-separated, resulting in broadband PE. At higher surface coverage, formation of particle strings and clusters caused red-shifting of the PE peak and a narro...

  9. Issues in autonomous mobile sensor networks

    E-Print Network [OSTI]

    Dharne, Avinash Gopal

    2009-05-15T23:59:59.000Z

    Autonomous mobile sensor networks consist of a number of autonomous mobile robots equipped with various sensors and tasked with a common mission. This thesis considers the topology control of such an ad hoc mobile sensor network. In particular, I...

  10. Method of fabricating an optoelectronic device having a bulk heterojunction

    DOE Patents [OSTI]

    Shtein, Max (Ann Arbor, MI); Yang, Fan (Princeton, NJ); Forrest, Stephen R. (Princeton, NJ)

    2008-10-14T23:59:59.000Z

    A method of fabricating an optoelectronic device comprises: depositing a first layer having protrusions over a first electrode, in which the first layer comprises a first organic small molecule material; depositing a second layer on the first layer such that the second layer is in physical contact with the first layer; in which the smallest lateral dimension of the protrusions are between 1 to 5 times the exciton diffusion length of the first organic small molecule material; and depositing a second electrode over the second layer to form the optoelectronic device. A method of fabricating an organic optoelectronic device having a bulk heterojunction is also provided and comprises: depositing a first layer with protrusions over an electrode by organic vapor phase deposition; depositing a second layer on the first layer where the interface of the first and second layers forms a bulk heterojunction; and depositing another electrode over the second layer.

  11. Non- contacting capacitive diagnostic device

    DOE Patents [OSTI]

    Ellison, Timothy

    2005-07-12T23:59:59.000Z

    A non-contacting capacitive diagnostic device includes a pulsed light source for producing an electric field in a semiconductor or photovoltaic device or material to be evaluated and a circuit responsive to the electric field. The circuit is not in physical contact with the device or material being evaluated and produces an electrical signal characteristic of the electric field produced in the device or material. The diagnostic device permits quality control and evaluation of semiconductor or photovoltaic device properties in continuous manufacturing processes.

  12. Packaging of solid state devices

    DOE Patents [OSTI]

    Glidden, Steven C.; Sanders, Howard D.

    2006-01-03T23:59:59.000Z

    A package for one or more solid state devices in a single module that allows for operation at high voltage, high current, or both high voltage and high current. Low thermal resistance between the solid state devices and an exterior of the package and matched coefficient of thermal expansion between the solid state devices and the materials used in packaging enables high power operation. The solid state devices are soldered between two layers of ceramic with metal traces that interconnect the devices and external contacts. This approach provides a simple method for assembling and encapsulating high power solid state devices.

  13. LONG-TERM COLLOID MOBILIZATION AND COLLOID-FACILITATED TRANSPORT OF RADIONUCLIDES IN A SEMI-ARID VADOSE ZONE

    SciTech Connect (OSTI)

    Markus Flury; James B. Harsh; Fred Zhang; Glendon W. Gee; Earl D. Mattson; Peter C. L

    2012-08-01T23:59:59.000Z

    The main purpose of this project was to improve the fundamental mechanistic understanding and quantification of long-term colloid mobilization and colloid-facilitated transport of radionuclides in the vadose zone, with special emphasis on the semi-arid Hanford site. While we focused some of the experiments on hydrogeological and geochemical conditions of the Hanford site, many of our results apply to colloid and colloid-facilitated transport in general. Specific objectives were (1) to determine the mechanisms of colloid mobilization and colloid-facilitated radionuclide transport in undisturbed Hanford sediments under unsaturated flow, (2) to quantify in situ colloid mobilization and colloid-facilitated radionuclidetransport from Hanford sediments under field conditions, and (3) to develop a field-scale conceptual and numerical model for colloid mobilization and transport at the Hanford vadose zone, and use that model to predict long-term colloid and colloid- facilitated radionuclide transport. To achieve these goals and objectives, we have used a combination of experimental, theoretical, and numerical methods at different spatial scales, ranging from microscopic investigationsof single particle attachment and detachment to larger-scale field experiments using outdoor lysimeters at the Hanford site. Microscopic and single particle investigations provided fundamental insight into mechanisms of colloid interactions with the air-water interface. We could show that a moving air water interface (such as a moving water front during infiltration and drainage) is very effective in removing and mobilizing particles from a stationary surface. We further demonstrated that it is particularly the advancing air-water interface which is mainly responsible for colloid mobilization. Forces acting on the colloids calculated from theory corroborated our experimental results, and confirm that the detachment forces (surface tension forces) during the advancing air-water interface movement were stronger than during the receding movement. Theory indicates that, for hydrophilic colloids, the advancing interface movement generally exerts a stronger detachment force than the receding, except when the hysteresis of the colloid-air-water contact angle is small. These results of our study are particularly relevant for colloid mobilization and transport related to three process in the vadose zone at Hanford: (1) water infiltration into sediments during rainfall or snowmelt events, (2) groundwater fluctuations as caused by river stage fluctuations, and (3) steady-state, low-flow recharge in deep vadose zone sediments. Transient water flow, like during infiltration or groundwater level fluctuations, are most conducive for colloid mobilization, but even during steady-state, low-flow recharge, colloids can be mobile, although to a much lesser extent. The results of this project have led to a comprehensive and fundamental understanding of colloid transport and mobilization under unsaturated flow conditions at the Hanford site.

  14. Course Information --EE 531 Semiconductor Devices and Device Simulation

    E-Print Network [OSTI]

    Hochberg, Michael

    of Semiconductor Devices" by Hess "Si Processing for the VLSI Era: Vol. 3-- The Submicron MOSFET" by Wolf "Advanced: 20% Exam 1: 30% Exam 2: 30% Project: 20% Prerequisite: Semiconductor Devices (EE 482) or equivalent

  15. Conductive porous scaffolds as potential neural interface materials.

    SciTech Connect (OSTI)

    Hedberg-Dirk, Elizabeth L.; Cicotte, Kirsten N.; Buerger, Stephen P.; Reece, Gregory; Dirk, Shawn M.; Lin, Patrick P.

    2011-11-01T23:59:59.000Z

    Our overall intent is to develop improved prosthetic devices with the use of nerve interfaces through which transected nerves may grow, such that small groups of nerve fibers come into close contact with electrode sites, each of which is connected to electronics external to the interface. These interfaces must be physically structured to allow nerve fibers to grow through them, either by being porous or by including specific channels for the axons. They must be mechanically compatible with nerves such that they promote growth and do not harm the nervous system, and biocompatible to promote nerve fiber growth and to allow close integration with biological tissue. They must exhibit selective and structured conductivity to allow the connection of electrode sites with external circuitry, and electrical properties must be tuned to enable the transmission of neural signals. Finally, the interfaces must be capable of being physically connected to external circuitry, e.g. through attached wires. We have utilized electrospinning as a tool to create conductive, porous networks of non-woven biocompatible fibers in order to meet the materials requirements for the neural interface. The biocompatible fibers were based on the known biocompatible material poly(dimethyl siloxane) (PDMS) as well as a newer biomaterial developed in our laboratories, poly(butylene fumarate) (PBF). Both of the polymers cannot be electrospun using conventional electrospinning techniques due to their low glass transition temperatures, so in situ crosslinking methodologies were developed to facilitate micro- and nano-fiber formation during electrospinning. The conductivity of the electrospun fiber mats was controlled by controlling the loading with multi-walled carbon nanotubes (MWNTs). Fabrication, electrical and materials characterization will be discussed along with initial in vivo experimental results.

  16. 2030 Transportation and Mobility Plan

    E-Print Network [OSTI]

    Bi-State Metropolitan Planning Organization

    2006-08-11T23:59:59.000Z

    The Bi-State MPO 2030 T RANSPORTATION A N D MOBILITY PLAN Transport t at t i i on Invest t ment t s f f... 2030 Transportation and Mobility Plan Prepared by: The Bi-State MPO Staff In cooperation with: The Cities and Towns of Alma Arkoma Barling Bonanza Fort Smith Greenwood Kibler Lavaca Moffett Muldrow Pocola Roland Rudy Spiro...

  17. MOBILE PHONE, A SUSTAINABLE PRODUCT?

    E-Print Network [OSTI]

    van Tiggelen, Bart

    but mobile > fixed line household penetration) ITU, 2013 GSMA, 2013 Growth Operators activity Europe (EEA GSMA, 2014 Deloitte, 2012 Price of an entrylevel mobile broadband 12% of monthly GNI p.c. 1125Wh / year (own measures, Malmodin 2014) · network : 23kWh / user / year (Malmodin 2014) · French electricity

  18. Support and maneuvering device

    DOE Patents [OSTI]

    Wood, R.L.

    1987-03-23T23:59:59.000Z

    A support and maneuvering device includes an elongated flexible inflatable enclosure having a fixed end and a movable end. The movable end is collapsible toward the fixed end to a contracted position when the enclosure is in a noninflated condition. Upon inflation, the movable end is movable away from the fixed end to an extended position. The movable end includes means for mounting an article such as a solar reflector thereon. The device also includes a plurality of position controlling means disposed about the movable end to effect adjusting movement of portions thereof by predetermined amounts and for controlling an angle at which the article disposed at the movable end is oriented. The plurality of position controlling means limits a suitable number degrees of freedom of the movable end for transmitting a steering motion thereto and for controlling the position thereof. 9 figs.

  19. Nuclear reactor safety device

    DOE Patents [OSTI]

    Hutter, Ernest (Wilmette, IL)

    1986-01-01T23:59:59.000Z

    A safety device is disclosed for use in a nuclear reactor for axially repositioning a control rod with respect to the reactor core in the event of an upward thermal excursion. Such safety device comprises a laminated helical ribbon configured as a tube-like helical coil having contiguous helical turns with slidably abutting edges. The helical coil is disclosed as a portion of a drive member connected axially to the control rod. The laminated ribbon is formed of outer and inner laminae. The material of the outer lamina has a greater thermal coefficient of expansion than the material of the inner lamina. In the event of an upward thermal excursion, the laminated helical coil curls inwardly to a smaller diameter. Such inward curling causes the total length of the helical coil to increase by a substantial increment, so that the control rod is axially repositioned by a corresponding amount to reduce the power output of the reactor.

  20. Support and maneuvering device

    DOE Patents [OSTI]

    Wood, Richard L. (Arvada, CO)

    1988-01-01T23:59:59.000Z

    A support and maneuvering device includes an elongated flexible inflatable enclosure having a fixed end and a movable end. The movable end is collapsible toward the fixed end to a contracted position when the enclosure is in a noninflated condition. Upon inflation, the movable end is movable away from the fixed end to an extended position. The movable end includes means for mounting an article such as a solar reflector thereon. The device also includes a plurality of position controlling means disposed about the movable end to effect adjusting movement of portions thereof by predetermined amounts and for controlling an angle at which the article disposed at the movable end is oriented. The plurality of position controlling means limits a suitable number degrees of freedom of the movable end for transmitting a steering motion thereto and for controlling the position thereof.

  1. Light modulating device

    DOE Patents [OSTI]

    Rauh, R.D.; Goldner, R.B.

    1989-12-26T23:59:59.000Z

    In a device for transmitting light, means for controlling the transmissivity of the device, including a ceramic, reversibly electrochromic, crystalline element having a highly reflective state when injected with electrons and charge compensating ions and a highly transmissive state when the electrons and ions are removed, the crystalline element being characterized as having a reflectivity of at least 50% in the reflective state and not greater than 10% in the transmissive state, and means for modulating the crystalline element between the reflective and transmissive states by injecting ions into the crystalline element in response to an applied electrical current of a first polarity and removing the ions in response to an applied electrical current of a second polarity are disclosed. 1 fig.

  2. Light modulating device

    DOE Patents [OSTI]

    Rauh, R. David (Newton, MA); Goldner, Ronald B. (Lexington, MA)

    1989-01-01T23:59:59.000Z

    In a device for transmitting light, means for controlling the transmissivity of the device, including a ceramic, reversibly electrochromic, crystalline element having a highly reflective state when injected with electrons and charge compensating ions and a highly transmissive state when the electrons and ions are removed, the crystalline element being characterized as having a reflectivity of at least 50% in the reflective state and not greater than 10% in the transmissive state, and means for modulating the crystalline element between the reflective and transmissive states by injecting ions into the crystalline element in response to an applied electrical current of a first polarity and removing the ions in response to an applied electrical current of a second polarity.

  3. Regenerative braking device

    DOE Patents [OSTI]

    Hoppie, Lyle O. (Birmingham, MI)

    1982-01-12T23:59:59.000Z

    Disclosed are several embodiments of a regenerative braking device for an automotive vehicle. The device includes a plurality of rubber rollers (24, 26) mounted for rotation between an input shaft (14) connectable to the vehicle drivetrain and an output shaft (16) which is drivingly connected to the input shaft by a variable ratio transmission (20). When the transmission ratio is such that the input shaft rotates faster than the output shaft, the rubber rollers are torsionally stressed to accumulate energy, thereby slowing the vehicle. When the transmission ratio is such that the output shaft rotates faster than the input shaft, the rubber rollers are torsionally relaxed to deliver accumulated energy, thereby accelerating or driving the vehicle.

  4. Dielectrokinetic chromatography devices

    DOE Patents [OSTI]

    Chirica, Gabriela S; Fiechtner, Gregory J; Singh, Anup K

    2014-12-16T23:59:59.000Z

    Disclosed herein are methods and devices for dielectrokinetic chromatography. As disclosed, the devices comprise microchannels having at least one perturber which produces a non-uniformity in a field spanning the width of the microchannel. The interaction of the field non-uniformity with a perturber produces a secondary flow which competes with a primary flow. By decreasing the size of the perturber the secondary flow becomes significant for particles/analytes in the nanometer-size range. Depending on the nature of a particle/analyte present in the fluid and its interaction with the primary flow and the secondary flow, the analyte may be retained or redirected. The composition of the primary flow can be varied to affect the magnitude of primary and/or secondary flows on the particles/analytes and thereby separate and concentrate it from other particles/analytes.

  5. Hybrid electroluminescent devices

    SciTech Connect (OSTI)

    Shiang, Joseph John (Niskayuna, NY); Duggal, Anil Raj (Niskayuna, NY); Michael, Joseph Darryl (Schenectady, NY)

    2010-08-03T23:59:59.000Z

    A hybrid electroluminescent (EL) device comprises at least one inorganic diode element and at least one organic EL element that are electrically connected in series. The absolute value of the breakdown voltage of the inorganic diode element is greater than the absolute value of the maximum reverse bias voltage across the series. The inorganic diode element can be a power diode, a Schottky barrier diode, or a light-emitting diode.

  6. Residual gas analysis device

    DOE Patents [OSTI]

    Thornberg, Steven M. (Peralta, NM)

    2012-07-31T23:59:59.000Z

    A system is provided for testing the hermeticity of a package, such as a microelectromechanical systems package containing a sealed gas volume, with a sampling device that has the capability to isolate the package and breach the gas seal connected to a pulse valve that can controllably transmit small volumes down to 2 nanoliters to a gas chamber for analysis using gas chromatography/mass spectroscopy diagnostics.

  7. Temperature measuring device

    DOE Patents [OSTI]

    Lauf, Robert J. (Oak Ridge, TN); Bible, Don W. (Clinton, TN); Sohns, Carl W. (Oak Ridge, TN)

    1999-01-01T23:59:59.000Z

    Systems and methods are described for a wireless instrumented silicon wafer that can measure temperatures at various points and transmit those temperature readings to an external receiver. The device has particular utility in the processing of semiconductor wafers, where it can be used to map thermal uniformity on hot plates, cold plates, spin bowl chucks, etc. without the inconvenience of wires or the inevitable thermal perturbations attendant with them.

  8. Biomolecular detection device

    DOE Patents [OSTI]

    Huo, Qisheng (Albuquerque, NM); Liu, Jun (Albuquerque, NM)

    2008-10-21T23:59:59.000Z

    A device for detecting and measuring the concentration of biomolecules in solution, utilizing a conducting electrode in contact with a solution containing target biomolecules, with a film with controllable pore size distribution characteristics applied to at least one surface of the conducting electrode. The film is functionalized with probe molecules that chemically interact with the target biomolecules at the film surface, blocking indicator molecules present in solution from diffusing from the solution to the electrode, thereby changing the electrochemical response of the electrode.

  9. Plasma jet ignition device

    DOE Patents [OSTI]

    McIlwain, Michael E. (Franklin, MA); Grant, Jonathan F. (Wayland, MA); Golenko, Zsolt (North Reading, MA); Wittstein, Alan D. (Fairfield, CT)

    1985-01-15T23:59:59.000Z

    An ignition device of the plasma jet type is disclosed. The device has a cylindrical cavity formed in insulating material with an electrode at one end. The other end of the cylindrical cavity is closed by a metal plate with a small orifice in the center which plate serves as a second electrode. An arc jumping between the first electrode and the orifice plate causes the formation of a highly-ionized plasma in the cavity which is ejected through the orifice into the engine cylinder area to ignite the main fuel mixture. Two improvements are disclosed to enhance the operation of the device and the length of the plasma plume. One improvement is a metal hydride ring which is inserted in the cavity next to the first electrode. During operation, the high temperature in the cavity and the highly excited nature of the plasma breaks down the metal hydride, liberating hydrogen which acts as an additional fuel to help plasma formation. A second improvement consists of a cavity insert containing a plurality of spaced, metal rings. The rings act as secondary spark gap electrodes reducing the voltage needed to maintain the initial arc in the cavity.

  10. Thermophotovoltaic energy conversion device

    DOE Patents [OSTI]

    Charache, G.W.; Baldasaro, P.F.; Egley, J.L.

    1998-05-19T23:59:59.000Z

    A thermophotovoltaic device and a method for making the thermophotovoltaic device are disclosed. The device includes an n-type semiconductor material substrate having top and bottom surfaces, a tunnel junction formed on the top surface of the substrate, a region of active layers formed on top of the tunnel junction and a back surface reflector (BSR). The tunnel junction includes a layer of heavily doped n-type semiconductor material that is formed on the top surface of the substrate and a layer of heavily doped p-type semiconductor material formed on the n-type layer. An optional pseudomorphic layer can be formed between the n-type and p-type layers. A region of active layers is formed on top of the tunnel junction. This region includes a base layer of p-type semiconductor material and an emitter layer of n-type semiconductor material. An optional front surface window layer can be formed on top of the emitter layer. An optional interference filter can be formed on top of the emitter layer or the front surface window layer when it is used. 1 fig.

  11. Detector LifeCycle Costs and Considerations Mobility Measurement in Urban Transportation Pooled Fund Study

    E-Print Network [OSTI]

    Detector LifeCycle Costs and Considerations Mobility Measurement in Urban Transportation tool of typical data collection devices along with estimated lifecycle costs. The objectives of the costestimating detector tool are: 1. Provide an overview of the key issues and cost elements one needs

  12. Enabling Offline Access to Facebook Streams on Mobile Dept. of Information and

    E-Print Network [OSTI]

    Venkatasubramanian, Nalini

    Enabling Offline Access to Facebook Streams on Mobile Devices Ye Zhao Dept. of Information [Information Systems Applications]: Miscellaneous Keywords Offline, Prefetching, Rich Content, Facebook 1 such as Facebook, Twit- ter, LinkedIn, Google+, and Instagram ­ indeed, many peo- ple rely on these social networks

  13. Human Generated Power for Mobile Electronics Thad Starner Joseph A. Paradiso

    E-Print Network [OSTI]

    Starner, Thad E.

    batteries than phones to consumers. The phones sold to users include a rechargeable battery so repositories for music videos, movies, photos, and personal information such as e-mail. Laptops, which were computing over the past decade and describe how batteries affect design tradeoffs for mobile device

  14. A Demonstration of MobiTree: Progressive 3D Tree Models Streaming on Mobile Clients

    E-Print Network [OSTI]

    Boyer, Edmond

    representation of plants [2]. We discuss how foliage is rendered in Section 4 and the technical challenges in rendering plant on mobile devices in Section 5. The demonstration and further applications are described Systems Applications]: Miscellaneous General Terms Design, Human Factors Keywords Streaming, Plant Models

  15. Support for Personal and Service Mobility in Ubiquitous Computing Environments1

    E-Print Network [OSTI]

    von Bochmann, Gregor

    ) #12;3 Wireless Personal Area Networking (WPAN), of which Bluetooth [2] is an example. Devices1 #12;2 Support for Personal and Service Mobility in Ubiquitous Computing Environments1 K. El to the background. One of its most notable attributes is its potential to extend the scope of service and personal

  16. Abstract --Developing software for mobile or ad hoc scenarios is very cost intensive. Different software and

    E-Print Network [OSTI]

    Steimann, Friedrich

    for an appropriate development support for devices with short life cycles. Third-party solutions often do not reachAbstract -- Developing software for mobile or ad hoc scenarios is very cost intensive. Different processors and big memories are available in principle, they con- sume a great amount of valuable battery

  17. IEEE TRANSACTIONS ON ELECTRON DEVICES, VOL. 50, NO. 2, FEBRUARY 2003 479 Impact Ionization Measurements

    E-Print Network [OSTI]

    Shapira, Yoram

    IEEE TRANSACTIONS ON ELECTRON DEVICES, VOL. 50, NO. 2, FEBRUARY 2003 479 Impact Ionization structure and a lateral layout for a given application and operational conditions is developed. Empirical current. Index Terms--Breakdown, empirical models, impact ionization, pseudomorphic high electron mobility

  18. Energy Impact of Secure Computation on a Handheld Device # Zhiyuan Li + Rong Xu

    E-Print Network [OSTI]

    Li, Zhiyuan

    and mobile computing. Many architectural and software e#orts have been initiated to improve the energy eEnergy Impact of Secure Computation on a Handheld Device # Zhiyuan Li + Rong Xu Department#oading is an important approach to save the energy consumption while improving perfor­ mance for wireless networked

  19. Using a Secure Java Micro-kernel on Embedded Devices for the Reliable Execution of

    E-Print Network [OSTI]

    Binder, Walter

    Using a Secure Java Micro-kernel on Embedded Devices for the Reliable Execution of Dynamically Uploaded Applications Walter Binder and Bal´azs Lichtl CoCo Software Engineering GmbH Margaretenstr. 22 applications. Mobile code is used for application upload, as well as for remote configuration and maintenance

  20. Graphene Transistors Fabricated via Transfer-Printing In Device Active-Areas

    E-Print Network [OSTI]

    Graphene Transistors Fabricated via Transfer-Printing In Device Active-Areas on Large Wafer Xiaogan graphene islands from a graphite and then uses transfer printing to place the islands from the stamp from the printed graphene. The transistors show a hole and electron mobility of 3735 and 795 cm2/V

  1. Thermoelectric Materials, Devices and Systems:

    Broader source: Energy.gov (indexed) [DOE]

    -DRAFT - FOR OFFICIAL USE ONLY - DRAFT Thermoelectric Materials, Devices and Systems: 1 Technology Assessment 2 Contents 3 1. Thermoelectric Generation ......

  2. Impact ionization in N-polar AlGaN/GaN high electron mobility transistors

    SciTech Connect (OSTI)

    Killat, N., E-mail: Nicole.Killat@bristol.ac.uk, E-mail: Martin.Kuball@bristol.ac.uk; Uren, M. J.; Kuball, M., E-mail: Nicole.Killat@bristol.ac.uk, E-mail: Martin.Kuball@bristol.ac.uk [Center for Device Thermography and Reliability (CDTR), H. H. Wills Physics Laboratory, University of Bristol, Tyndall Avenue, Bristol BS8 1TL (United Kingdom); Keller, S.; Kolluri, S.; Mishra, U. K. [Department of Electrical and Computer Engineering, University of Santa Barbara California, Santa Barbara, California 93106 (United States)

    2014-08-11T23:59:59.000Z

    The existence of impact ionization as one of the open questions for GaN device reliability was studied in N-polar AlGaN/GaN high electron mobility transistors. Electroluminescence (EL) imaging and spectroscopy from underneath the device gate contact revealed the presence of hot electrons in excess of the GaN bandgap energy even at moderate on-state bias conditions, enabling impact ionization with hole currents up to several hundreds of pA/mm. The detection of high energy luminescence from hot electrons demonstrates that EL analysis is a highly sensitive tool to study degradation mechanisms in GaN devices.

  3. AN INNOVATIVE TECHNIQUE FOR THIN FILM INTERFACE TOUGHNESS RESEARCH

    SciTech Connect (OSTI)

    Wang, J.J.

    2004-11-01T23:59:59.000Z

    A material configuration of central importance in microelectronics, optoelectronics, and thermal barrier coating technology is a thin or thick film of one material deposited onto a substrate of a different material. Fabrication of such a structure inevitably gives rise to stress in the film due to lattice mismatch, differing coefficients of thermal expansion, chemical reactions, or other physical effects. Therefore, in general, the weakest link in this composite system often resides at the interface between the film and substrate. In order to make multi-layered electronic devices and structural composites with long-term reliability, the fracture behavior of the material interfaces must be known. Unfortunately, none of the state-of-the-art testing methods for evaluating interface fracture toughness is fully conformed to fracture mechanics theory, as is evident from the severe scatter in the existing data and the procedure dependence in film/coating evaluation methods. This project is intended to address the problems associated with this deficiency and offers an innovative testing procedure for the determination of interface fracture toughness applicable to coating materials in general. This new approach and the associated bi-material fracture mechanics development proposed for evaluating interface fracture toughness are described herein. The effort includes development of specimen configuration and related instrumentation set-up, testing procedures, postmortem examination, and analytical evaluation. A spiral notch torsion fracture toughness test system was utilized. The objective of the testing procedure described is to enable the development of new coating materials by providing a reliable method for use in assessing their performance. This innovative technology for measuring interface toughness was demonstrated for oxide scales formed on high-temperature alloys of MA956. The estimated energy release rate (in terms of J-integral) at the interface of the alumina scale and MA956 substrate is 3.7 N-m/m{sup 2}, and the estimated equivalent Mode I fracture toughness is 1.1 MPa {radical}m. This innovative technique is expected to greatly assist the development of coating materials with improved protective capabilities and provide a reliable method for use in assessing material performance.

  4. Kuali Financial System Implementation Collector Interface Meeting

    E-Print Network [OSTI]

    Stephens, Graeme L.

    Kuali Financial System Implementation Collector Interface Meeting December 17, 2008 Presenters of the Kuali Financial System (KFS) Collector Interface Format Differences from FRS Answer your questions #12 Collector File collector

  5. Advanced Power Electronic Interfaces for Distributed

    E-Print Network [OSTI]

    Advanced Power Electronic Interfaces for Distributed Energy Systems Part 2: Modeling, Development Electronic Interfaces for Distributed Energy Systems Part 2: Modeling, Development, and Experimental, and Experimental Evaluation of Advanced Control Functions for Single-Phase Utility-Connected Inverter S

  6. Improved Thermoelectric Devices: Advanced Semiconductor Materials for Thermoelectric Devices

    SciTech Connect (OSTI)

    None

    2009-12-11T23:59:59.000Z

    Broad Funding Opportunity Announcement Project: Phononic Devices is working to recapture waste heat and convert it into usable electric power. To do this, the company is using thermoelectric devices, which are made from advanced semiconductor materials that convert heat into electricity or actively remove heat for refrigeration and cooling purposes. Thermoelectric devices resemble computer chips, and they manage heat by manipulating the direction of electrons at the nanoscale. These devices aren’t new, but they are currently too inefficient and expensive for widespread use. Phononic Devices is using a high-performance, cost-effective thermoelectric design that will improve the device’s efficiency and enable electronics manufacturers to more easily integrate them into their products.

  7. Atomistic modeling of dislocation-interface interactions

    SciTech Connect (OSTI)

    Wang, Jian [Los Alamos National Laboratory; Valone, Steven M [Los Alamos National Laboratory; Beyerlein, Irene J [Los Alamos National Laboratory; Misra, Amit [Los Alamos National Laboratory; Germann, T. C. [Los Alamos National Laboratory

    2011-01-31T23:59:59.000Z

    Using atomic scale models and interface defect theory, we first classify interface structures into a few types with respect to geometrical factors, then study the interfacial shear response and further simulate the dislocation-interface interactions using molecular dynamics. The results show that the atomic scale structural characteristics of both heterophases and homophases interfaces play a crucial role in (i) their mechanical responses and (ii) the ability of incoming lattice dislocations to transmit across them.

  8. Micro environmental sensing device

    DOE Patents [OSTI]

    Polosky, Marc A. (Tijeras, NM); Lukens, Laurance L. (Tijeras, NM)

    2006-05-02T23:59:59.000Z

    A microelectromechanical (MEM) acceleration switch is disclosed which includes a proof mass flexibly connected to a substrate, with the proof mass being moveable in a direction substantially perpendicular to the substrate in response to a sensed acceleration. An electrode on the proof mass contacts one or more electrodes located below the proof mass to provide a switch closure in response to the sensed acceleration. Electrical latching of the switch in the closed position is possible with an optional latching electrode. The MEM acceleration switch, which has applications for use as an environmental sensing device, can be fabricated using micromachining.

  9. Multiported storage devices

    E-Print Network [OSTI]

    Grande, Marcus Bryan

    2000-01-01T23:59:59.000Z

    of niultiported storage device 3 Linux file I/O subsystem 4 Windows NT layered I/O driver model 10 15 5 Location of multiported module in I/O stack 17 6 The bulfer cache . . . 20 7 Queuing of I/O requests 8 Processing of I/O requests by smart blkfiltcr 9... Registering of filter applet via Linux stacked module mechanism . 21 22 . . 26 10 Table of registered filter applets (functions) . . 27 11 Overhead due to presence of smart blkfilter alone . 12 Overhead of smart blkfilter using rot13 filter port 31 33...

  10. Nanotube resonator devices

    DOE Patents [OSTI]

    Jensen, Kenneth J; Zettl, Alexander K; Weldon, Jeffrey A

    2014-05-06T23:59:59.000Z

    A fully-functional radio receiver fabricated from a single nanotube is being disclosed. Simultaneously, a single nanotube can perform the functions of all major components of a radio: antenna, tunable band-pass filter, amplifier, and demodulator. A DC voltage source, as supplied by a battery, can power the radio. Using carrier waves in the commercially relevant 40-400 MHz range and both frequency and amplitude modulation techniques, successful music and voice reception has been demonstrated. Also disclosed are a radio transmitter and a mass sensor using a nanotube resonator device.

  11. Addressing the needs of mobile users

    E-Print Network [OSTI]

    Sohn, Timothy Youngjin

    2008-01-01T23:59:59.000Z

    based services or their personal devices. The personal datatheir personal data stored across multiple devices to betterpersonal information is often spread across multiple devices

  12. Compacted Soil Liner Interface Strength Importance

    E-Print Network [OSTI]

    Case Study Compacted Soil Liner Interface Strength Importance Timothy D. Stark, F.ASCE1 ; Hangseok interface is not the geomembrane (GM)/compacted low-permeability soil liner (LPSL) but a soil­soil interface placing the cover soil from bottom to top. DOI: 10.1061/(ASCE)GT.1943-5606 .0000556. © 2012 American

  13. Web Interfaces 1 Python Scripts in Browsers

    E-Print Network [OSTI]

    Verschelde, Jan

    Web Interfaces 1 Python Scripts in Browsers the web server Apache processing forms with Python scripts Python code to write HTML 2 Web Interfaces for the Determinant dynamic interactive forms passing, 28 October 2013 Scientific Software (MCS 507 L-27) web interfaces 28 October 2013 1 / 42 #12;Web

  14. Stretchable and foldable electronic devices

    DOE Patents [OSTI]

    2013-10-08T23:59:59.000Z

    Disclosed herein are stretchable, foldable and optionally printable, processes for making devices and devices such as semiconductors, electronic circuits and components thereof that are capable of providing good performance when stretched, compressed, flexed or otherwise deformed. Strain isolation layers provide good strain isolation to functional device layers. Multilayer devices are constructed to position a neutral mechanical surface coincident or proximate to a functional layer having a material that is susceptible to strain-induced failure. Neutral mechanical surfaces are positioned by one or more layers having a property that is spatially inhomogeneous, such as by patterning any of the layers of the multilayer device.

  15. Stretchable and foldable electronic devices

    DOE Patents [OSTI]

    Rogers, John A; Huang, Yonggang; Ko, Heung Cho; Stoykovich, Mark; Choi, Won Mook; Song, Jizhou; Ahn, Jong Hyun; Kim, Dae Hyeong

    2014-12-09T23:59:59.000Z

    Disclosed herein are stretchable, foldable and optionally printable, processes for making devices and devices such as semiconductors, electronic circuits and components thereof that are capable of providing good performance when stretched, compressed, flexed or otherwise deformed. Strain isolation layers provide good strain isolation to functional device layers. Multilayer devices are constructed to position a neutral mechanical surface coincident or proximate to a functional layer having a material that is susceptible to strain-induced failure. Neutral mechanical surfaces are positioned by one or more layers having a property that is spatially inhomogeneous, such as by patterning any of the layers of the multilayer device.

  16. Nanoscale heterogeneity at the aqueous electrolyte-electrode interface

    E-Print Network [OSTI]

    David T. Limmer; Adam P. Willard

    2014-10-06T23:59:59.000Z

    Using molecular dynamics simulations, we reveal emergent properties of hydrated electrode interfaces that while molecular in origin are integral to the behavior of the system across long times scales and large length scales. Specifically, we describe the impact of a disordered and slowly evolving adsorbed layer of water on the molecular structure and dynamics of the electrolyte solution adjacent to it. Generically, we find that densities and mobilities of both water and dissolved ions are spatially heterogeneous in the plane parallel to the electrode over nanosecond timescales. These and other recent results are analyzed in the context of available experimental literature from surface science and electrochemistry. We speculate on the implications of this emerging microscopic picture on the catalytic proficiency of hydrated electrodes, offering an new direction for study in heterogeneous catalysis at the nanoscale.

  17. IEEE ELECTRON DEVICE LETTERS. VOL. EDL-6, NO. 10, OCTOBER 1985 491 J. J. ROSENBERG, M. BENLAMRI, P. D. KIRCHNER, J. M. WOODALL, AND G. D. PETTIT

    E-Print Network [OSTI]

    Woodall, Jerry M.

    IEEE ELECTRON DEVICE LETTERS. VOL. EDL-6, NO. 10, OCTOBER 1985 491 J. J. ROSENBERG, M. BENLAMRI, P of the reported heterojunction FET devices utilize A1,Gal _,As/ GaAs heterojunctions in which electrons. D. KIRCHNER, J. M. WOODALL, AND G. D. PETTIT Abstract-This letter describes high electron mobility

  18. 1572 IEEE JOURNAL ON SELECTED AREAS IN COMMUNICATIONS, VOL. 29, NO. 8, SEPTEMBER 2011 DELAR: A Device-Energy-Load Aware

    E-Print Network [OSTI]

    Latchman, Haniph A.

    : A Device-Energy-Load Aware Relaying Framework for Heterogeneous Mobile Ad Hoc Networks Wei Liu, Member- signed Device-Energy-Load Aware Relaying framework, named DELAR, to achieve energy conservation from Abstract--This paper addresses energy conservation, a funda- mental issue of paramount importance

  19. Adaptive Brain-Computer Interface Passive brain-computer interfaces are designed to use

    E-Print Network [OSTI]

    Boetticher, Gary D.

    Adaptive Brain-Computer Interface Abstract Passive brain-computer interfaces are designed to use brain activity as an additional input, allowing the adaptation of the interface in real time according to the user's mental state. While most current brain computer interface research (BCI) is designed for direct

  20. Heat transfer in soft nanoscale interfaces: the influence of interface curvature

    E-Print Network [OSTI]

    Kjelstrup, Signe

    Heat transfer in soft nanoscale interfaces: the influence of interface curvature Anders Lervik transient non-equilibrium molecular-dynamics simulations, heat-transfer through nanometer-scale interfaces processes. We show that the modeling of heat transfer across a nanodroplet/fluid interface requires