Powered by Deep Web Technologies
Note: This page contains sample records for the topic "integration mode reference" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Integrating Generations with Advanced Reference Counting Garbage Collectors  

E-Print Network [OSTI]

Integrating Generations with Advanced Reference Counting Garbage Collectors Hezi Azatchi 1 and Erez@cs.technion.ac.il Abstract. We study an incorporation of generations into a modern reference counting collector. We start with the two on-the- y collectors suggested by Levanoni and Petrank: a reference counting collector

Krintz, Chandra

2

Combined Field Integral Equation Based Theory of Characteristic Mode  

E-Print Network [OSTI]

Conventional electric field integral equation based theory is susceptible to the spurious internal resonance problem when the characteristic modes of closed perfectly conducting objects are computed iteratively. In this paper, we present a combined field integral equation based theory to remove the difficulty of internal resonances in characteristic mode analysis. The electric and magnetic field integral operators are shown to share a common set of non-trivial characteristic pairs (values and modes), leading to a generalized eigenvalue problem which is immune to the internal resonance corruption. Numerical results are presented to validate the proposed formulation. This work may offer efficient solutions to characteristic mode analysis which involves electrically large closed surfaces.

Qi I. Dai; Qin S. Liu; Hui Gan; Weng Cho Chew

2015-03-04T23:59:59.000Z

3

Reference value developed for mechanical integrity of storage caverns  

SciTech Connect (OSTI)

A reference value to verify the mechanical integrity of salt-cavern wells used in hydrocarbon storage has been developed. Salt caverns play important roles in large-scale storage of hydrocarbon gases and liquids. Required for safe and economical operation of these storage caverns is verification of the external mechanical integrity of the access (injection and withdrawal) wells. This study had the following goals: Provision of an overview of current practice; and Development of a reference for external well mechanical-integrity testing with respect to performance, data evaluation, and assessment. The storage cavern operators expected to gain the following: Comparability between method and assessments; Aid in influencing the movement towards standardization by regulators; and A firm technical base for use in litigation between the operator and other parties.

Crotogino, F. [Kavernen Bau- and Betriebs-GmbH, Hannover (Germany)

1996-10-28T23:59:59.000Z

4

Modes of asymmetry: the application of harmonic analysis to symmetric quantum dynamics and quantum reference frames  

E-Print Network [OSTI]

Finding the consequences of symmetry for open system quantum dynamics is a problem with broad applications, including describing thermal relaxation, deriving quantum limits on the performance of amplifiers, and exploring quantum metrology in the presence of noise. The symmetry of the dynamics may reflect a symmetry of the fundamental laws of nature, a symmetry of a low-energy effective theory, or it may describe a practical restriction such as the lack of a reference frame. In this paper, we apply some tools of harmonic analysis together with ideas from quantum information theory to this problem. The central idea is to study the decomposition of quantum operations---in particular, states, measurements and channels---into different modes, which we call modes of asymmetry. Under symmetric processing, a given mode of the input is mapped to the corresponding mode of the output, implying that one can only generate a given output if the input contains all of the necessary modes. By defining monotones that quantify the asymmetry in a particular mode, we also derive quantitative constraints on the resources of asymmetry that are required to simulate a given asymmetric operation. We present applications of our results for deriving bounds on the probability of success in nondeterministic state transitions, such as quantum amplification, and a simplified formalism for studying the degradation of quantum reference frames.

Iman Marvian; Robert W. Spekkens

2014-12-05T23:59:59.000Z

5

Integration of Failure Modes and Effects Analysis (FMEA) in the Engineering Design Process.  

E-Print Network [OSTI]

??ABSTRACT Integration of Failure Modes and Effects Analysis (FMEA) in the Engineering Design Process Hua-wei Wen Failure modes and effects analysis (FMEA) is one of… (more)

Wen, Hua-wei

2013-01-01T23:59:59.000Z

6

Current mode integrators and their applications in low-voltage high frequency CMOS signal processing  

E-Print Network [OSTI]

Low voltage CMOS fully differential integrators for high frequency continuous-time filters using current-mode techniques are presented.. Current mode techniques are employed to avoid the use of the floating differential pair, in order to achieve...

Smith, Sterling Lane

1993-01-01T23:59:59.000Z

7

Computing Relative Free Energies of Solvation Using Single Reference Thermodynamic Integration Augmented  

E-Print Network [OSTI]

Computing Relative Free Energies of Solvation Using Single Reference Thermodynamic Integration relative transformation free energies in a series of molecules with respect to a single reference state of the SR-TI variant is demonstrated in calculations of relative solvation free energies for a series

8

Design and Evaluation of a 42-V Automotive Alternator With Integrated Switched-Mode Rectifier  

E-Print Network [OSTI]

This paper presents techniques for the design of high-power Lundell alternators with integrated switched-mode rectifiers. A multisection stator winding and interleaved rectifier arrangement is introduced that enables high ...

Tang, Sai Chun

9

Silicon-germanium saturable absorbers and erbium-doped waveguides for integrated mode-locked lasers  

E-Print Network [OSTI]

In this thesis, Silicon-Germanium (SiGe) Saturable Bragg Reflectors (SBR) and Erbium-doped waveguide chips are fabricated and characterized as crucial components for integration of a mode-locked laser on a Si-chip. The ...

Byun, Hyunil

2006-01-01T23:59:59.000Z

10

Rotor reference frame models of a multiloop 2-phase motor drive in brushless DC and microstepping modes  

SciTech Connect (OSTI)

This paper describes non-linear models of a 2-phase permanent magnet synchronous motor drive in brushless DC and microstepping modes. The models account for everything from the main power bus up to and including the mechanical load and velocity feedback loop. In particular, the models include the power electronics for each phase complete with their internal feedback loops. Classical state space averaged power electronics models are transformed to the rotor reference frame along with the usual electromechanical variables. Since SPICE linearizes the rotor reference frame model about shaft velocity, instead of shaft angle, frequency domain methods apply. The frequency domain analysis detects unstable interactions between torque angle and deliberate feedback within the drives. Time domain simulations using stator reference frame models confirm the results. All models are SPICE-compatible but were developed on Cadence`s Analog Workbench.

Chen, J.E. [Lockheed Missiles and Space Co. Inc., Sunnyvale, CA (United States)

1995-12-31T23:59:59.000Z

11

Structural integrity and potential failure modes of hanford high-level waste tanks  

SciTech Connect (OSTI)

Structural Integrity of the Hanford High-Level Waste Tanks were evaluated based on the existing Design and Analysis Documents. All tank structures were found adequate for the normal operating and seismic loads. Potential failure modes of the tanks were assessed by engineering interpretation and extrapolation of the existing engineering documents.

Han, F.C.

1996-09-30T23:59:59.000Z

12

Integrated Scheduling Using Rendezvous Window and Sniff Mode for Wireless Personal Area Networks  

E-Print Network [OSTI]

by connecting many light-weight personal devices such as PDAs, mobile phones, and media players. UWB (Ultra WideIntegrated Scheduling Using Rendezvous Window and Sniff Mode for Wireless Personal Area Networks and in a piconet level as well as power saving, which is desired for wireless personal area network systems. 1

Lee, Tae-Jin

13

Integrated system modeling analysis of a cryogenic multi-cell deflecting-mode cavity resonator  

SciTech Connect (OSTI)

A deflecting mode cavity is the integral element for six-dimensional phase-space beam control in bunch compressors and emittance transformers at high energy beam test facilities. RF performance of a high-Q device is, however, highly sensitive to operational conditions, in particular in a cryo-cooling environment. Using analytic calculations and RF simulations, we examined cavity parameters and deflecting characteristics of TM{sub 110,?} mode of a 5 cell resonator in a liquid nitrogen cryostat, which has long been used at the Fermilab A0 Photoinjector (A0PI). The sensitivity analysis indicated that the cavity could lose 30%–40% of deflecting force due to defective input power coupling accompanying non-uniform field distribution across the cells with 40 ? 50 MeV electron beam and 70–80 kW klystron power. Vacuum-cryomodules of the 5 cell cavity are planned to be installed at the Fermilab Advanced Superconducting Test Accelerator facility. Comprehensive modeling analysis integrated with multi-physics simulation tools showed that RF loading of 1 ms can cause a ?5 K maximum temperature increase, corresponding to a ?4.3 ?m/ms deformation and a 1.32 MHz/K maximum frequency shift. The integrated system modeling analysis will improve design process of a high-Q cavity with more accurate prediction of cryogenic RF performance under a high power pulse operation.

Shin, Young-Min [Department of Physics, Northern Illinois University, Dekalb, Illinois 60115 (United States) [Department of Physics, Northern Illinois University, Dekalb, Illinois 60115 (United States); Fermi National Accelerator Laboratory, Batavia, Illinois 60510 (United States); Church, Michael [Fermi National Accelerator Laboratory, Batavia, Illinois 60510 (United States)] [Fermi National Accelerator Laboratory, Batavia, Illinois 60510 (United States)

2013-09-15T23:59:59.000Z

14

On the Mapping and Wavenumber Resolution of Line-Integral Data for Observations of Low-Mode Internal Tides  

E-Print Network [OSTI]

-Mode Internal Tides BRIAN D. DUSHAW Applied Physics Laboratory, College of Ocean and Fishery Sciences-integral tomography data to esti- mate the spectra, maps, and energy of low-mode internal-tide radiation; the exten results are, of course, obtained when both types of data are used. As a practical example of the formalism

Dushaw, Brian

15

Radioactive waste management integrated data base: a bibliography. [Approximately 1100 references  

SciTech Connect (OSTI)

The purpose of this indexed bibliography is to organize and collect the literature references on waste generation and treatment, characteristics, inventories, and costs. The references were captured into a searchable information file, and the information file was sorted, indexed, and printed for this bibliography. A completion of approximately 1100 references to nuclear waste management, the first of a series, is completed. Each reference is categorized by waste origin (commercial, defense, institutional, and foreign) and by subject area: (1) high-level wastes, (2) low-level wastes, (3) TRU wastes, (4) airborne wastes, (5) remedial action (formerly utilized sites, surplus facilities, and mill tailings), (6) isolation, (7) transportation, (8) spent fuel, (9) fuel cycle centers, and (10) a general category that covers nonspecific wastes. Five indexes are provided to assist the user in locating documents of interest: author, author affiliation (corporate authority), subject category, keyword, and permuted title. Machine (computer) searches of these indexes can be made specifying multiple constraints if so desired. This bibliography will be periodically updated as new information becomes available. In addition to being used in searches for specific data, the information file can also be used for resource document collection, names and addresses of contacts, and identification of potential sources of data.

Johnson, C.A.; Garland, P.A.

1980-09-01T23:59:59.000Z

16

1. Smart Structures All these terms refer to the integration of  

E-Print Network [OSTI]

.g. material science, applied mechanics, control theory, etc.) are involved in the design of a smart structure system solution. The materials used in smart structures often have interesting and unusual prop erties that can be called smart. However, the materials themselves are not smart. ``Smartness'' refers

Möbius, Bernd

17

An integrated approach for prospectively investigating a mode-of-action for rodent liver effects  

SciTech Connect (OSTI)

Registration of new plant protection products (e.g., herbicide, insecticide, or fungicide) requires comprehensive mammalian toxicity evaluation including carcinogenicity studies in two species. The outcome of the carcinogenicity testing has a significant bearing on the overall human health risk assessment of the substance and, consequently, approved uses for different crops across geographies. In order to understand the relevance of a specific tumor finding to human health, a systematic, transparent, and hypothesis-driven mode of action (MoA) investigation is, appropriately, an expectation by the regulatory agencies. Here, we describe a novel approach of prospectively generating the MoA data by implementing additional end points to the standard guideline toxicity studies with sulfoxaflor, a molecule in development. This proactive MoA approach results in a more robust integration of molecular with apical end points while minimizing animal use. Sulfoxaflor, a molecule targeting sap-feeding insects, induced liver effects (increased liver weight due to hepatocellular hypertrophy) in an initial palatability probe study for selecting doses for subsequent repeat-dose dietary studies. This finding triggered the inclusion of dose-response investigations of the potential key events for rodent liver carcinogenesis, concurrent with the hazard assessment studies. As predicted, sulfoxaflor induced liver tumors in rats and mice in the bioassays. The MoA data available by the time of the carcinogenicity finding supported the conclusion that the carcinogenic potential of sulfoxaflor was due to CAR/PXR nuclear receptor activation with subsequent hepatocellular proliferation. This MoA was not considered to be relevant to humans as sulfoxaflor is unlikely to induce hepatocellular proliferation in humans and therefore would not be a human liver carcinogen. - Highlights: • We prospectively generated MoA data into standard guideline toxicity studies. • A proactive MoA approach integrates all end points while minimizing animal use. • MoA data predicted the rodent carcinogenicity of sulfoxaflor via CAR/PXR. • Liver MoA was considered not relevant to humans and hence not a human carcinogen.

LeBaron, Matthew J., E-mail: MJLeBaron@dow.com [Toxicology and Environmental Research and Consulting, The Dow Chemical Company, Midland, MI, 48674 (United States); Geter, David R., E-mail: dave.geter@gmail.com [Toxicology and Environmental Research and Consulting, The Dow Chemical Company, Midland, MI, 48674 (United States); Rasoulpour, Reza J. [Toxicology and Environmental Research and Consulting, The Dow Chemical Company, Midland, MI, 48674 (United States); Gollapudi, B. Bhaskar, E-mail: BBGollapudi@dow.com [Toxicology and Environmental Research and Consulting, The Dow Chemical Company, Midland, MI, 48674 (United States); Thomas, Johnson, E-mail: JThomas4@dow.com [Toxicology and Environmental Research and Consulting, The Dow Chemical Company, Midland, MI, 48674 (United States); Murray, Jennifer, E-mail: AMurray@dow.com [Toxicology and Environmental Research and Consulting, The Dow Chemical Company, Midland, MI, 48674 (United States); Kan, H. Lynn, E-mail: HLKan@dow.com [Toxicology and Environmental Research and Consulting, The Dow Chemical Company, Midland, MI, 48674 (United States); Wood, Amanda J., E-mail: AJWood@dow.com [Toxicology and Environmental Research and Consulting, The Dow Chemical Company, Midland, MI, 48674 (United States); Elcombe, Cliff, E-mail: CliffElcombe@cxrbiosciences.com [CXR Biosciences, 2 James Lindsay Place, Dundee Technopole, Dundee, DD1 5JJ, Scotland (United Kingdom); Vardy, Audrey, E-mail: audrey_vardy@europe.bd.com [CXR Biosciences, 2 James Lindsay Place, Dundee Technopole, Dundee, DD1 5JJ, Scotland (United Kingdom); McEwan, Jillian, E-mail: jillian.mcewan@rtmcewan.co.uk [CXR Biosciences, 2 James Lindsay Place, Dundee Technopole, Dundee, DD1 5JJ, Scotland (United Kingdom); Terry, Claire, E-mail: CTerry@dow.com [Dow AgroSciences, Abingdon, Oxfordshire (United Kingdom); Billington, Richard, E-mail: RBillington@dow.com [Dow AgroSciences, Abingdon, Oxfordshire (United Kingdom)

2013-07-15T23:59:59.000Z

18

Methodology for integration of HVDC links in large ac systems. Phase I. Reference manual. Final report  

SciTech Connect (OSTI)

HVDC transmission has been found to be an attractive alternative to ac transmission in many situations. Evaluations of HVDC alternatives include technical, economic, environmental and sometimes regulatory considerations which are different than those for ac transmission. This research project resulted in the preparation of a HVDC reference manual which describes a comprehensive methodology for evaluating HVDC alternatives in utility transmission planning. It provides basic background information about existing HVDC systems. It describes the types of studies required and potential problems which must be dealt with. It also discusses how the studies are usually run and what system modeling is required. It emphasizes the importance of proper control of the dc system and provides examples of control systems which have been used.

Meredith, R.J.

1983-03-01T23:59:59.000Z

19

Substrate-Integrated Waveguide Filter Design Using Mode-Matching Techniques  

E-Print Network [OSTI]

technologies, substrate-integrated waveguide (SIW) components have emerged as low-cost and planar alternatives for the analysis and design of substrate-integrated waveguide (SIW) filters. Recently developed fabrication methods, which are more geared towards waveguide-based analysis and design, are in demand. Two

Bornemann, Jens

20

Crosstalk analysis of integrated Geiger-mode avalanche photodiode focal plane arrays  

E-Print Network [OSTI]

Arrays of photon-counting Geiger-mode avalanche photodiodes (APDs) sensitive to 1.06 and 1.55 µm wavelengths and as large as 256 x 64 elements on 50 µm pitch have been fabricated for defense applications. As array size, ...

Younger, Richard D.

Note: This page contains sample records for the topic "integration mode reference" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Integrated source of tunable nonmaximally mode-entangled photons in a domain-engineered lithium niobate waveguide  

SciTech Connect (OSTI)

The nonmaximally entangled state is a special kind of entangled state, which has important applications in quantum information processing. It has been generated in quantum circuits based on bulk optical elements. However, corresponding schemes in integrated quantum circuits have been rarely considered. In this Letter, we propose an effective solution for this problem. An electro-optically tunable nonmaximally mode-entangled photon state is generated in an on-chip domain-engineered lithium niobate (LN) waveguide. Spontaneous parametric down-conversion and electro-optic interaction are effectively combined through suitable domain design to transform the entangled state into our desired formation. Moreover, this is a flexible approach to entanglement architectures. Other kinds of reconfigurable entanglements are also achievable through this method. LN provides a very promising platform for future quantum circuit integration.

Ming, Yang; Wu, Zi-jian; Xu, Fei, E-mail: feixu@nju.edu.cn; Lu, Yan-qing, E-mail: yqlu@nju.edu.cn [National Laboratory of Solid State Microstructures and College of Engineering and Applied Sciences, Nanjing University, Nanjing 210093 (China); Cui, Guo-xin [National Laboratory of Solid State Microstructures and College of Engineering and Applied Sciences, Nanjing University, Nanjing 210093 (China); Key Laboratory of Nanodevices and Nanoapplications, Suzhou Institute of Nano-Tech and Nano-Bionics, CAS, Suzhou 215000 (China); Tan, Ai-hong [Laboratory for Quantum Information, China Jiliang University, Hangzhou 310018 (China)

2014-04-28T23:59:59.000Z

22

Efficient Integration of Old and New Research Tools for Automating the Identification and Analysis of Seismic Reference Events  

SciTech Connect (OSTI)

any single computer program for seismic data analysis will not have all the capabilities needed to study reference events, since hese detailed studies will be highly specialized. It may be necessary to develop and test new algorithms, and then these special ;odes must be integrated with existing software to use their conventional data-processing routines. We have investigated two neans of establishing communications between the legacy and new codes: CORBA and XML/SOAP Web services. We have nvestigated making new Java code communicate with a legacy C-language program, geotool, running under Linux. Both methods vere successful, but both were difficult to implement. C programs on UNIX/Linux are poorly supported for Web services, compared vith the Java and .NET languages and platforms. Easier-to-use middleware will be required for scientists to construct distributed applications as easily as stand-alone ones. Considerable difficulty was encountered in modifying geotool, and this problem shows he need to use component-based user interfaces instead of large C-language codes where changes to one part of the program nay introduce side effects into other parts. We have nevertheless made bug fixes and enhancements to that legacy program, but t remains difficult to expand it through communications with external software.

Wagner, Robert; Rivers, Wilmer

2005-01-25T23:59:59.000Z

23

High-Performance Integrated Dual-Gate AlGaN/GaN Enhancement-Mode Transistor  

E-Print Network [OSTI]

In this letter, we present a new AlGaN/GaN enhancement-mode (E-mode) transistor based on a dual-gate structure. The dual gate allows the transistor to combine an E-mode behavior with low on-resistance and very high breakdown ...

Lu, Bin

24

Integrable S-matrices, massive and massless modes and the AdS_2 x S^2 superstring  

E-Print Network [OSTI]

We derive the exact S-matrix for the scattering of particular representations of the centrally-extended psu(1|1)^2 Lie superalgebra, conjectured to be related to the massive modes of the light-cone gauge string theory on AdS_2 x S^2 x T^6. The S-matrix consists of two copies of a centrally-extended psu(1|1) invariant S-matrix and is in agreement with the tree-level result following from perturbation theory. Although the overall factor is left unfixed, the constraints following from crossing symmetry and unitarity are given. The scattering involves long representations of the symmetry algebra, and the relevant representation theory is studied in detail. We also discuss Yangian symmetry and find it has a standard form for a particular limit of the aforementioned representations. This has a natural interpretation as the massless limit, and we investigate the corresponding limits of the massive S-matrix. Under the assumption that the massless modes of the light-cone gauge string theory transform in these limiting representations, the resulting S-matrices would provide the building blocks for the full S-matrix. Finally, some brief comments are given on the Bethe ansatz.

Ben Hoare; Antonio Pittelli; Alessandro Torrielli

2014-11-14T23:59:59.000Z

25

Ultrafast and widely tuneable vertical-external-cavity surface-emitting laser, mode-locked by a graphene-integrated distributed Bragg reflector  

E-Print Network [OSTI]

We report a versatile and cost-effective way of controlling the unsaturated loss, modulation depth and saturation fluence of graphene-based saturable absorbers (GSAs), by changing the thickness of a spacer between SLG and a high-reflection mirror. This allows us to modulate the electric field intensity enhancement at the GSA from 0 up to 400%, due to the interference of incident and reflected light at the mirror. The unsaturated loss of the SLG-mirror-assembly can be reduced to$\\sim$0. We use this to mode-lock a VECSEL from 935 to 981nm. This approach can be applied to integrate SLG into various optical components, such as output coupler mirrors, dispersive mirrors, dielectric coatings on gain materials. Conversely, it can also be used to increase absorption (up to 10%) in various graphene based photonics and optoelectronics devices, such as photodetectors.

Zaugg, C A; Wittwer, V J; Popa, D; Milana, S; Kulmala, T; Sundaram, R S; Mangold, M; Sieber, O D; Golling, M; Lee, Y; Ahn, J H; Ferrari, A C; Keller, U

2013-01-01T23:59:59.000Z

26

Mode Order Converter Using Tapered Multi-mode Interference Couplers  

E-Print Network [OSTI]

, and modes of guided light is essential for flexibility in photonic integrated circuit (PIC) design.3120) Integrated optics devices; (130.2790) Guided waves 1. Introduction Accommodating various sizes, shapes indices. One can define Am0 as the transmission of the fundamental mode in the output guide when exciting

Texas at Austin, University of

27

Poroelastic references  

SciTech Connect (OSTI)

This file contains a list of relevant references on the Biot theory (forward and inverse approaches), the double-porosity and dual-permeability theory, and seismic wave propagation in fracture porous media, in RIS format, to approach seismic monitoring in a complex fractured porous medium such as Brady?s Geothermal Field.

Christina Morency

2014-12-12T23:59:59.000Z

28

Poroelastic references  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

This file contains a list of relevant references on the Biot theory (forward and inverse approaches), the double-porosity and dual-permeability theory, and seismic wave propagation in fracture porous media, in RIS format, to approach seismic monitoring in a complex fractured porous medium such as Brady?s Geothermal Field.

Christina Morency

29

Reference Documents  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared at 278, 298,NIST 800-53 NationalTreatment.Reference-Documents Sign

30

Reference Documents  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared at 278, 298,NIST 800-53 NationalTreatment.Reference-Documents

31

Reference Material  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared at 278, 298,NIST 800-53Reference Materials There are a variety of

32

CircleKs DEFINITIVE vim Reference Version: 1.0  

E-Print Network [OSTI]

CircleKs DEFINITIVE vim Reference Version: 1.0 Major rules: 1. Vim has 2 modes: insert and command inserting text s! Cut character under cursor and start inserting text After youre in insert mode, vim

33

Collaborative Ventures and Value of Learning: Integrating the Transaction Cost and Strategic Option Perspectives on the Choice of Market Entry Modes  

E-Print Network [OSTI]

This paper employs a simple stochastic model to investigate how transaction cost and strategic option considerations interact to influence a firm’s evaluation of collaborative venturing as a market entry mode. After demonstrating how uncertainty...

Chi, Tailan; McGuire, Donald J.

1996-01-01T23:59:59.000Z

34

Changing quantum reference frames  

E-Print Network [OSTI]

We consider the process of changing reference frames in the case where the reference frames are quantum systems. We find that, as part of this process, decoherence is necessarily induced on any quantum system described relative to these frames. We explore this process with examples involving reference frames for phase and orientation. Quantifying the effect of changing quantum reference frames serves as a first step in developing a relativity principle for theories in which all objects including reference frames are necessarily quantum.

Matthew C. Palmer; Florian Girelli; Stephen D. Bartlett

2014-05-21T23:59:59.000Z

35

Microgrid cyber security reference architecture.  

SciTech Connect (OSTI)

This document describes a microgrid cyber security reference architecture. First, we present a high-level concept of operations for a microgrid, including operational modes, necessary power actors, and the communication protocols typically employed. We then describe our motivation for designing a secure microgrid; in particular, we provide general network and industrial control system (ICS)-speci c vulnerabilities, a threat model, information assurance compliance concerns, and design criteria for a microgrid control system network. Our design approach addresses these concerns by segmenting the microgrid control system network into enclaves, grouping enclaves into functional domains, and describing actor communication using data exchange attributes. We describe cyber actors that can help mitigate potential vulnerabilities, in addition to performance bene ts and vulnerability mitigation that may be realized using this reference architecture. To illustrate our design approach, we present a notional a microgrid control system network implementation, including types of communica- tion occurring on that network, example data exchange attributes for actors in the network, an example of how the network can be segmented to create enclaves and functional domains, and how cyber actors can be used to enforce network segmentation and provide the neces- sary level of security. Finally, we describe areas of focus for the further development of the reference architecture.

Veitch, Cynthia K.; Henry, Jordan M.; Richardson, Bryan T.; Hart, Derek H.

2013-07-01T23:59:59.000Z

36

VIM 5.6 Reference Guide version 0.7  

E-Print Network [OSTI]

VIM 5.6 Reference Guide version 0.7 Bram Moolenaar Oleg Raisky May 25, 2000 Conventions: :marks denotes VIM command typed in Ex mode visual denotes VIM command typed in Visual mode [..] denotes pressed key/combination of keys this command/feature is VIM specific (not found in Vi) Contents 1 Movement

Eckmiller, Rolf

37

High frequency reference electrode  

DOE Patents [OSTI]

A high frequency reference electrode for electrochemical experiments comprises a mercury-calomel or silver-silver chloride reference electrode with a layer of platinum around it and a layer of a chemically and electrically resistant material such as TEFLON around the platinum covering all but a small ring or halo' at the tip of the reference electrode, adjacent to the active portion of the reference electrode. The voltage output of the platinum layer, which serves as a redox electrode, and that of the reference electrode are coupled by a capacitor or a set of capacitors and the coupled output transmitted to a standard laboratory potentiostat. The platinum may be applied by thermal decomposition to the surface of the reference electrode. The electrode provides superior high-frequency response over conventional electrodes. 4 figs.

Kronberg, J.W.

1994-05-31T23:59:59.000Z

38

Optical voltage reference  

DOE Patents [OSTI]

An optical voltage reference for providing an alternative to a battery source is described. The optical reference apparatus provides a temperature stable, high precision, isolated voltage reference through the use of optical isolation techniques to eliminate current and impedance coupling errors. Pulse rate frequency modulation is employed to eliminate errors in the optical transmission link while phase-lock feedback is employed to stabilize the frequency to voltage transfer function. 2 figures.

Rankin, R.; Kotter, D.

1994-04-26T23:59:59.000Z

39

Application Protocol Reference Architecture Application Protocol Reference Architecture  

E-Print Network [OSTI]

Application Protocol Reference Architecture 165 Chapter 7 Application Protocol Reference Architecture This chapter proposes an alternative reference architecture for application protocols. The proposed reference architecture consists of the set of possible architectures for application protocols

van Sinderen, Marten

40

Sample References Business Student  

E-Print Network [OSTI]

and provide them with the job description/your resume Brand Yourself- the heading should be the same as your resume and cover letter Be Consistent- use the same fonts/sizes as your resume and cover letter Pay/advice-tools/resume-cover-letter/how-to-make-the-best-use-of-references Obtaining References http

Note: This page contains sample records for the topic "integration mode reference" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Dirac Quasinormal modes of MSW black holes  

E-Print Network [OSTI]

In this paper we study the Dirac quasinormal modes of an uncharged 2 + 1 black hole proposed by Mandal et. al and referred to as MSW black hole in this work. The quasi- normal mode is studied using WKB approximation method. The study shows that the imaginary part of quasinormal frequencies increases indicating that the oscillations are damping and hence the black hole is stable against Dirac perturbations.

Sebastian, Saneesh

2014-01-01T23:59:59.000Z

42

Dirac Quasinormal modes of MSW black holes  

E-Print Network [OSTI]

In this paper we study the Dirac quasinormal modes of an uncharged 2 + 1 black hole proposed by Mandal et. al and referred to as MSW black hole in this work. The quasi- normal mode is studied using WKB approximation method. The study shows that the imaginary part of quasinormal frequencies increases indicating that the oscillations are damping and hence the black hole is stable against Dirac perturbations.

Saneesh Sebastian; V. C. Kuriakose

2014-01-15T23:59:59.000Z

43

INVESTIGATION Construction of Reference Chromosome-Scale  

E-Print Network [OSTI]

INVESTIGATION Construction of Reference Chromosome-Scale Pseudomolecules for Potato: Integrating was genotyped with several types of molecular genetic markers to construct a new ~936 cM linkage map comprising and orientation within the pseudo- molecules are closely collinear with independently constructed high density

Douches, David S.

44

Value of Information References  

SciTech Connect (OSTI)

This file contains a list of relevant references on value of information (VOI) in RIS format. VOI provides a quantitative analysis to evaluate the outcome of the combined technologies (seismology, hydrology, geodesy) used to monitor Brady's Geothermal Field.

Morency, Christina

2014-12-12T23:59:59.000Z

45

Value of Information References  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

This file contains a list of relevant references on value of information (VOI) in RIS format. VOI provides a quantitative analysis to evaluate the outcome of the combined technologies (seismology, hydrology, geodesy) used to monitor Brady's Geothermal Field.

Morency, Christina

46

Membrane reference electrode  

DOE Patents [OSTI]

A reference electrode utilizes a small thin, flat membrane of a highly conductive glass placed on a small diameter insulator tube having a reference material inside in contact with an internal voltage lead. When the sensor is placed in a non-aqueous ionic electrolytic solution, the concentration difference across the glass membrane generates a low voltage signal in precise relationship to the concentration of the species to be measured, with high spatial resolution. 2 figs.

Redey, L.; Bloom, I.D.

1988-01-21T23:59:59.000Z

47

Precision displacement reference system  

DOE Patents [OSTI]

A precision displacement reference system is described, which enables real time accountability over the applied displacement feedback system to precision machine tools, positioning mechanisms, motion devices, and related operations. As independent measurements of tool location is taken by a displacement feedback system, a rotating reference disk compares feedback counts with performed motion. These measurements are compared to characterize and analyze real time mechanical and control performance during operation.

Bieg, Lothar F. (Albuquerque, NM); Dubois, Robert R. (Albuquerque, NM); Strother, Jerry D. (Edgewood, NM)

2000-02-22T23:59:59.000Z

48

List mode multichannel analyzer  

DOE Patents [OSTI]

A digital list mode multichannel analyzer (MCA) built around a programmable FPGA device for onboard data analysis and on-the-fly modification of system detection/operating parameters, and capable of collecting and processing data in very small time bins (<1 millisecond) when used in histogramming mode, or in list mode as a list mode MCA.

Archer, Daniel E. (Livermore, CA); Luke, S. John (Pleasanton, CA); Mauger, G. Joseph (Livermore, CA); Riot, Vincent J. (Berkeley, CA); Knapp, David A. (Livermore, CA)

2007-08-07T23:59:59.000Z

49

Kink modes in pedestal  

SciTech Connect (OSTI)

Kink modes are investigated in pedestal for shaped tokamaks. An analytic combining criterion is presented. It lies on the middle of the sufficient criterion of Lortz and necessary criterion of Mercier giving a more restricted necessary criterion. Growth rates and mode structure are calculated. For large poloidal mode number, the modes are highly localized in both poloidal and radial directions. The modes increase rapidly when they approach to the resonant surface. They are typical of edge localized modes (ELMs). It is assumed that the modes vanish inside the next resonant surface, then, there seems to be a second stable region. Several mitigation methods for controlling ELMs are proposed.

Wang, Z. T. [Southwestern Institute of Physics, Chengdu 610041 (China) [Southwestern Institute of Physics, Chengdu 610041 (China); College of Physics Science and Technology, Sichuan University, Chengdu 610065 (China); He, Z. X.; Dong, J. Q.; Wang, Z. H.; Xu, M. [Southwestern Institute of Physics, Chengdu 610041 (China)] [Southwestern Institute of Physics, Chengdu 610041 (China); Xu, X. L.; Mou, M. L.; Sun, T. T.; Huang, J.; Chen, S. Y.; Tang, C. J. [College of Physics Science and Technology, Sichuan University, Chengdu 610065 (China)] [College of Physics Science and Technology, Sichuan University, Chengdu 610065 (China)

2014-03-15T23:59:59.000Z

50

Modular Integrated Energy Systems  

E-Print Network [OSTI]

Honeywell #12;Modular Integrated Energy Systems Task 5 Prototype Development Reference Design DocumentationModular Integrated Energy Systems Prepared for: Oak Ridge National Laboratory P.O. Box 2008 Building 3147 Oak Ridge, TN 37831 April 27, 2006 Prepared by: Honeywell Laboratories 3660 Technology Drive

Oak Ridge National Laboratory

51

Nonresident Alien Reference Guide  

E-Print Network [OSTI]

- 1 - Nonresident Alien Reference Guide #12;- 2 - Definition Nonresident Alien (NRA) is defined as any employee who is NOT a United States Citizen or a Permanent Resident (Resident Alien or Green Card status. These are NOT Immigration categories. United States Citizen Permanent Resident Alien Resident

Adali, Tulay

52

(Nonresident Alien) Reference Guide  

E-Print Network [OSTI]

- 1 - NRA (Nonresident Alien) Reference Guide #12;- 2 - UMBC'S OFFICES ASSISTING THE NONRESIDENT ALIEN (NRA) Office of International Education Administration Building 2nd floor Arlene Wergin Ext: 5 - Definition Nonresident Alien (NRA) is defined as any employee who is NOT a United States Citizen

Adali, Tulay

53

MSL ENTERANCE REFERENCE AREA  

E-Print Network [OSTI]

MSL ENTERANCE LOBBY ELEV STAIRS SSL-019 REFERENCE AREA SSL-021 GROUP STUDY SSL-018 STUDY ROOM SSL-029 SSL-020 COPY ROOM SSL-022 GROUP STUDY SSL-026 STACKS SSL-023 GROUP STUDY SSL-024 GROUP STUDY SSL TBL-014 TBL-014A STAIRS SSL-007 GIS/ WORKROOM SSL-011 SSL-008 SSL-009 SSL-010 SSL-014 SSL-017 STAIRS

Aalberts, Daniel P.

54

OSH technical reference manual  

SciTech Connect (OSTI)

In an evaluation of the Department of Energy (DOE) Occupational Safety and Health programs for government-owned contractor-operated (GOCO) activities, the Department of Labor`s Occupational Safety and Health Administration (OSHA) recommended a technical information exchange program. The intent was to share written safety and health programs, plans, training manuals, and materials within the entire DOE community. The OSH Technical Reference (OTR) helps support the secretary`s response to the OSHA finding by providing a one-stop resource and referral for technical information that relates to safe operations and practice. It also serves as a technical information exchange tool to reference DOE-wide materials pertinent to specific safety topics and, with some modification, as a training aid. The OTR bridges the gap between general safety documents and very specific requirements documents. It is tailored to the DOE community and incorporates DOE field experience.

Not Available

1993-11-01T23:59:59.000Z

55

Whispering-gallery-mode-based seismometer  

SciTech Connect (OSTI)

A whispering-gallery-mode-based seismometer provides for receiving laser light into an optical fiber, operatively coupling the laser light from the optical fiber into a whispering-gallery-mode-based optical resonator, operatively coupling a spring of a spring-mass assembly to a housing structure; and locating the whispering-gallery-mode-based optical resonator between the spring-mass assembly and the housing structure so as to provide for compressing the whispering-gallery-mode-based optical resonator between the spring-mass assembly and the housing structure responsive to a dynamic compression force from the spring-mass assembly responsive to a motion of the housing structure relative to an inertial frame of reference.

Fourguette, Dominique Claire; Otugen, M Volkan; Larocque, Liane Marie; Ritter, Greg Aan; Meeusen, Jason Jeffrey; Ioppolo, Tindaro

2014-06-03T23:59:59.000Z

56

STEP Intern Reference Check Sheet  

Broader source: Energy.gov [DOE]

STEP Intern Reference Check Sheet, from the Tool Kit Framework: Small Town University Energy Program (STEP).

57

Modes of log gravity  

SciTech Connect (OSTI)

The physical modes of a recently proposed D-dimensional 'critical gravity', linearized about its anti-de Sitter vacuum, are investigated. All 'log mode' solutions, which we categorize as 'spin-2' or 'Proca', arise as limits of the massive spin-2 modes of the noncritical theory. The linearized Einstein tensor of a spin-2 log mode is itself a 'nongauge' solution of the linearized Einstein equations whereas the linearized Einstein tensor of a Proca mode takes the form of a linearized general coordinate transformation. Our results suggest the existence of a holographically dual logarithmic conformal field theory.

Bergshoeff, Eric A.; Rosseel, Jan [Centre for Theoretical Physics, University of Groningen, Nijenborgh 4, 9747 AG Groningen (Netherlands); Hohm, Olaf [Center for Theoretical Physics, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139 (United States); Townsend, Paul K. [Department of Applied Mathematics and Theoretical Physics, Centre for Mathematical Sciences, University of Cambridge, Wilberforce Road, Cambridge, CB3 0WA (United Kingdom)

2011-05-15T23:59:59.000Z

58

Appendix A: Reference case  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelinesProved Reserves (Billion CubicCubic Feet)Year Jan FebForeign Distribution6 Reference

59

Appendix A: Reference case  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelinesProved Reserves (Billion CubicCubic Feet)Year Jan FebForeign Distribution6 Reference4

60

Appendix A: Reference case  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelinesProved Reserves (Billion CubicCubic Feet)Year Jan FebForeign Distribution6 Reference44

Note: This page contains sample records for the topic "integration mode reference" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Appendix A: Reference case  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelinesProved Reserves (Billion CubicCubic Feet)Year Jan FebForeign Distribution66 Reference

62

Appendix A: Reference case  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelinesProved Reserves (Billion CubicCubic Feet)Year Jan FebForeign Distribution66 Reference8

63

Coal data: A reference  

SciTech Connect (OSTI)

This report, Coal Data: A Reference, summarizes basic information on the mining and use of coal, an important source of energy in the US. This report is written for a general audience. The goal is to cover basic material and strike a reasonable compromise between overly generalized statements and detailed analyses. The section ``Supplemental Figures and Tables`` contains statistics, graphs, maps, and other illustrations that show trends, patterns, geographic locations, and similar coal-related information. The section ``Coal Terminology and Related Information`` provides additional information about terms mentioned in the text and introduces some new terms. The last edition of Coal Data: A Reference was published in 1991. The present edition contains updated data as well as expanded reviews and additional information. Added to the text are discussions of coal quality, coal prices, unions, and strikes. The appendix has been expanded to provide statistics on a variety of additional topics, such as: trends in coal production and royalties from Federal and Indian coal leases, hours worked and earnings for coal mine employment, railroad coal shipments and revenues, waterborne coal traffic, coal export loading terminals, utility coal combustion byproducts, and trace elements in coal. The information in this report has been gleaned mainly from the sources in the bibliography. The reader interested in going beyond the scope of this report should consult these sources. The statistics are largely from reports published by the Energy Information Administration.

Not Available

1995-02-01T23:59:59.000Z

64

CH 6 REFERENCES.DOC 6-1 6 References  

E-Print Network [OSTI]

REFERENCES.DOC Allan, S., A. R. Buckley, and J. E. Meacham. 2001. Atlas of Oregon. Second Edition. William J

65

Nuclear Science References Database  

E-Print Network [OSTI]

The Nuclear Science References (NSR) database together with its associated Web interface, is the world's only comprehensive source of easily accessible low- and intermediate-energy nuclear physics bibliographic information for more than 210,000 articles since the beginning of nuclear science. The weekly-updated NSR database provides essential support for nuclear data evaluation, compilation and research activities. The principles of the database and Web application development and maintenance are described. Examples of nuclear structure, reaction and decay applications are specifically included. The complete NSR database is freely available at the websites of the National Nuclear Data Center http://www.nndc.bnl.gov/nsr and the International Atomic Energy Agency http://www-nds.iaea.org/nsr.

B. Pritychenko; E. B?ták; B. Singh; J. Totans

2014-07-08T23:59:59.000Z

66

Tank characterization reference guide  

SciTech Connect (OSTI)

Characterization of the Hanford Site high-level waste storage tanks supports safety issue resolution; operations and maintenance requirements; and retrieval, pretreatment, vitrification, and disposal technology development. Technical, historical, and programmatic information about the waste tanks is often scattered among many sources, if it is documented at all. This Tank Characterization Reference Guide, therefore, serves as a common location for much of the generic tank information that is otherwise contained in many documents. The report is intended to be an introduction to the issues and history surrounding the generation, storage, and management of the liquid process wastes, and a presentation of the sampling, analysis, and modeling activities that support the current waste characterization. This report should provide a basis upon which those unfamiliar with the Hanford Site tank farms can start their research.

De Lorenzo, D.S.; DiCenso, A.T.; Hiller, D.B.; Johnson, K.W.; Rutherford, J.H.; Smith, D.J. [Los Alamos Technical Associates, Kennewick, WA (United States); Simpson, B.C. [Westinghouse Hanford Co., Richland, WA (United States)

1994-09-01T23:59:59.000Z

67

Mode conversation losses in overmolded millimeter wave transmission lines  

E-Print Network [OSTI]

Millimeter wave transmission lines are integral components for many important applications like nuclear fusion and NMR spectroscopy. In low loss corrugated transmission lines propagating the HE,1 mode with a high waveguide ...

Tax, David S. (David Samuel)

2008-01-01T23:59:59.000Z

68

Landscapes as references for design  

E-Print Network [OSTI]

This is a study of the ways in which the forms in landscapes - natural terrain adapted and inhabited - can serve as references in architectural design. As references for design, landscapes provide a richness of responses ...

Batchelor, James P

1981-01-01T23:59:59.000Z

69

ENRAF gauge reference level calculations  

SciTech Connect (OSTI)

This document describes the method for calculating reference levels for Enraf Series 854 Level Detectors as installed in the tank farms. The reference level calculation for each installed level gauge is contained herein.

Huber, J.H., Fluor Daniel Hanford

1997-02-06T23:59:59.000Z

70

Budget Reconciliation Procedures Reference Guide  

E-Print Network [OSTI]

Budget Reconciliation Procedures Reference Guide eDev Course Number FMS723 Subject Area Budget Northwestern University #12;Reference Guide Budget Reconciliation Table of Contents Helpful Contacts....................................................................................... 14 723QuickRefGuidev1.4 2 of 14 #12;Reference Guide Budget Reconciliation Helpful Contacts Below

Shull, Kenneth R.

71

Capillary reference half-cell  

DOE Patents [OSTI]

The present invention is a reference half-cell electrode wherein intermingling of test fluid with reference fluid does not affect the performance of the reference half-cell over a long time. This intermingling reference half-cell may be used as a single or double junction submersible or surface reference electrode. The intermingling reference half-cell relies on a capillary tube having a first end open to reference fluid and a second end open to test fluid wherein the small diameter of the capillary tube limits free motion of fluid within the capillary to diffusion. The electrode is placed near the first end of the capillary in contact with the reference fluid. The method of operation of the present invention begins with filling the capillary tube with a reference solution. After closing the first end of the capillary, the capillary tube may be fully submerged or partially submerged with the second open end inserted into test fluid. Since the electrode is placed near the first end of the capillary, and since the test fluid may intermingle with the reference fluid through the second open end only by diffusion, this intermingling capillary reference half-cell provides a stable voltage potential for long time periods. 11 figs.

Hall, S.H.

1996-02-13T23:59:59.000Z

72

COSY INFINITY reference manual  

SciTech Connect (OSTI)

This is a reference manual for the arbitrary order particle optics and beam dynamics code COSY INFINITY. It is current as of June 28, 1990. COSY INFINITY is a code to study and design particle optical systems, including beamlines, spectrometers, and particle accelerators. At its core it is using differential algebraic (DA) methods, which allow a very systematic and simple calculation of high order effects. At the same time, it allows the computation of dependences on system parameters, which is often interesting in its own right and can also be used for fitting. COSY INFINITY has a full structured object oriented language environment. This provides a simple interface for the casual user. At the same time, it offers the demanding user a very flexible and powerful tool for the study and design of systems, and more generally, the utilization of DA methods. The power and generality of the environment is perhaps best demonstrated by the fact that the physics routines of COSY INFINITY are written in its own input language and are very compact. The approach also considerably facilitates the implementation of new features because they are incorporated with the same commands that are used for design and study. 26 refs.

Berz, M.

1990-07-01T23:59:59.000Z

73

Sensor Characteristics Reference Guide  

SciTech Connect (OSTI)

The Buildings Technologies Office (BTO), within the U.S. Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy (EERE), is initiating a new program in Sensor and Controls. The vision of this program is: • Buildings operating automatically and continuously at peak energy efficiency over their lifetimes and interoperating effectively with the electric power grid. • Buildings that are self-configuring, self-commissioning, self-learning, self-diagnosing, self-healing, and self-transacting to enable continuous peak performance. • Lower overall building operating costs and higher asset valuation. The overarching goal is to capture 30% energy savings by enhanced management of energy consuming assets and systems through development of cost-effective sensors and controls. One step in achieving this vision is the publication of this Sensor Characteristics Reference Guide. The purpose of the guide is to inform building owners and operators of the current status, capabilities, and limitations of sensor technologies. It is hoped that this guide will aid in the design and procurement process and result in successful implementation of building sensor and control systems. DOE will also use this guide to identify research priorities, develop future specifications for potential market adoption, and provide market clarity through unbiased information

Cree, Johnathan V.; Dansu, A.; Fuhr, P.; Lanzisera, Steven M.; McIntyre, T.; Muehleisen, Ralph T.; Starke, M.; Banerjee, Pranab; Kuruganti, T.; Castello, C.

2013-04-01T23:59:59.000Z

74

Architecture AddressingModes  

E-Print Network [OSTI]

MIPS R2000 Architecture and Assembly (Part 1) 1. CPU Registers 2. Byte Order 3. AddressingModes 4­endian byte order 3 2 1 0 0 1 2 3 Or Byte number #12; AddressingModes . MIPS is a load/store architecture . RICS -- Load/Store architecture -- All instructions have equal length of 4 bytes -- Every register can

Nguyen, Dat H.

75

Zero-mode waveguides  

DOE Patents [OSTI]

The present invention is directed to a method and an apparatus for analysis of an analyte. The method involves providing a zero-mode waveguide which includes a cladding surrounding a core where the cladding is configured to preclude propagation of electromagnetic energy of a frequency less than a cutoff frequency longitudinally through the core of the zero-mode waveguide. The analyte is positioned in the core of the zero-mode waveguide and is then subjected, in the core of the zero-mode waveguide, to activating electromagnetic radiation of a frequency less than the cut-off frequency under conditions effective to permit analysis of the analyte in an effective observation volume which is more compact than if the analysis were carried out in the absence of the zero-mode waveguide.

Levene, Michael J.; Korlach, Jonas; Turner, Stephen W.; Craighead, Harold G.; Webb, Watt W.

2007-02-20T23:59:59.000Z

76

Optical probe with reference fiber  

DOE Patents [OSTI]

A system for characterizing tissue includes the steps of generating an emission signal, generating a reference signal, directing the emission signal to and from the tissue, directing the reference signal in a predetermined manner relative to the emission signal, and using the reference signal to compensate the emission signal. In one embodiment compensation is provided for fluctuations in light delivery to the tip of the probe due to cable motion.

Da Silva, Luiz B. (Danville, CA); Chase, Charles L. (Dublin, CA)

2006-03-14T23:59:59.000Z

77

The electron geodesic acoustic mode  

SciTech Connect (OSTI)

In this report, a novel new mode, named the electron geodesic acoustic mode, is presented. This mode can occur in toroidal plasmas like the conventional geodesic acoustic mode (GAM). The frequency of this new mode is much larger than that of the conventional GAM by a factor equal to the square root of the ion to electron mass ratio.

Chakrabarti, N. [Saha Institute of Nuclear Physics, 1/AF Bidhannagar, Calcutta 700 064 (India); Guzdar, P. N. [Institute for Research in Electronics and Applied Physics, University of Maryland, College Park, Maryland 20742 (United States); Kaw, P. K. [Institute for Plasma Research Bhat, Gandhinagar 382428 (India)

2012-09-15T23:59:59.000Z

78

FAQS Reference Guide- Chemical Processing  

Broader source: Energy.gov [DOE]

This reference guide addresses the competency statements in the February 2010 edition of DOE-STD-1176-2010, Chemical Processing Functional Area Qualification Standard.

79

FAQS Reference Guide – Emergency Management  

Broader source: Energy.gov [DOE]

This reference guide addresses the competency statements in the January 2004 edition of DOE-STD-1177-2004, Emergency Management Functional Area Qualification Standard.

80

FAQS Reference Guide – Environmental Compliance  

Broader source: Energy.gov [DOE]

This reference guide addresses the competency statements in the June 2011 edition of DOE-STD-1156-2011, Environmental Compliance Functional Area Qualification Standard.

Note: This page contains sample records for the topic "integration mode reference" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

FAQS Reference Guide – Construction Management  

Broader source: Energy.gov [DOE]

This reference guide addresses the competency statements in the March 2004 edition of DOE-STD-1180-2004, Construction Management Functional Area Qualification Standard.

82

FAQS Reference Guide – Industrial Hygiene  

Broader source: Energy.gov [DOE]

This reference guide addresses the competency statements in the November 2007 edition of DOE-STD-1138-2007, Industrial Hygiene Functional Area Qualification Standard.

83

Ris Energy Report 6 References Reference list for Chapter 3  

E-Print Network [OSTI]

. European Commission. (2006). Action plan for energy efficiency: Real- ising the potential. Brussels. 2Risø Energy Report 6 References Reference list for Chapter 3 1. European Commission. (2007. Review Report FutuRES-E. Energy Economics group, university of Vienna. 5. European Commission. (2007

84

Mode Splitting for Efficient Plasmoinc Thin-film Solar Cell  

E-Print Network [OSTI]

We propose an efficient plasmonic structure consisting of metal strips and thin-film silicon for solar energy absorption. We numerically demonstrate the absorption enhancement in symmetrical structure based on the mode coupling between the localized plasmonic mode in Ag strip pair and the excited waveguide mode in silicon slab. Then we explore the method of symmetry-breaking to excite the dark modes that can further enhance the absorption ability. We compare our structure with bare thin-film Si solar cell, and results show that the integrated quantum efficiency is improved by nearly 90% in such thin geometry. It is a promising way for the solar cell.

Li, Tong; Jiang, Chun

2010-01-01T23:59:59.000Z

85

Wavelength meter having single mode fiber optics multiplexed inputs  

DOE Patents [OSTI]

A wavelength meter having a single mode fiber optics input is disclosed. The single mode fiber enables a plurality of laser beams to be multiplexed to form a multiplexed input to the wavelength meter. The wavelength meter can provide a determination of the wavelength of any one or all of the plurality of laser beams by suitable processing. Another aspect of the present invention is that one of the laser beams could be a known reference laser having a predetermined wavelength. Hence, the improved wavelength meter can provide an on-line calibration capability with the reference laser input as one of the plurality of laser beams.

Hackel, R.P.; Paris, R.D.; Feldman, M.

1993-02-23T23:59:59.000Z

86

Wavelength meter having single mode fiber optics multiplexed inputs  

DOE Patents [OSTI]

A wavelength meter having a single mode fiber optics input is disclosed. The single mode fiber enables a plurality of laser beams to be multiplexed to form a multiplexed input to the wavelength meter. The wavelength meter can provide a determination of the wavelength of any one or all of the plurality of laser beams by suitable processing. Another aspect of the present invention is that one of the laser beams could be a known reference laser having a predetermined wavelength. Hence, the improved wavelength meter can provide an on-line calibration capability with the reference laser input as one of the plurality of laser beams.

Hackel, Richard P. (Livermore, CA); Paris, Robert D. (San Ramon, CA); Feldman, Mark (Pleasanton, CA)

1993-01-01T23:59:59.000Z

87

Summary References | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

(NEPA) NEPA Reading Room SEIS for the Production of Tritium in a Commercial Light Water Reactor Reference Documents Summary References Summary References Crosswalk of...

88

Appendix E References | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

(NEPA) NEPA Reading Room SEIS for the Production of Tritium in a Commercial Light Water Reactor Reference Documents Appendix E References Appendix E References Crosswalk...

89

SAS ® 9.3 Integration Technologies Directory Services Reference  

E-Print Network [OSTI]

For a hardcopy book: No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise, without the prior written permission of the publisher, SAS Institute Inc. For a Web download or e-book: Your use of this publication shall be governed by the terms established by the vendor at the time you acquire this publication. The scanning, uploading, and distribution of this book via the Internet or any other means without the permission of the publisher is illegal and punishable by law. Please purchase only authorized electronic editions and do not participate in or encourage electronic piracy of copyrighted materials. Your support of others ' rights is appreciated. U.S. Government Restricted Rights Notice: Use, duplication, or disclosure of this software and related documentation by the U.S. government is subject to the Agreement with SAS Institute and the restrictions set forth in FAR 52.227–19, Commercial Computer Software-Restricted Rights

unknown authors

90

POET with C++ Reference Manual  

E-Print Network [OSTI]

POET with #22;C++ Reference Manual University of Waterloo David Taylor and Peter A. Buhr c #3; 1996 July 23, 2006 #3; Permission is granted to make copies for personal or educational use #12; 2 POET Reference Manual Contents 1 Introduction 3 2 Before Starting POET 3 3 Accessing POET 3 4 User Interface 3 5

Buhr, Peter Allan

91

ALBOTA ET AL. Three-Dimensional Imaging Laser Radars with Geiger-Mode Avalanche Photodiode Arrays  

E-Print Network [OSTI]

· ALBOTA ET AL. Three-Dimensional Imaging Laser Radars with Geiger-Mode Avalanche Photodiode Arrays- lanche photodiodes (APDs) operating in Geiger mode, with integrated timing circuitry for each pixel [2-Mode Avalanche Photodiode Arrays Marius A. Albota, Brian F. Aull, Daniel G. Fouche, Richard M. Heinrichs, David G

92

Asian Communication Modes  

E-Print Network [OSTI]

Communication in its simplest form refers to the ongoing process of sharing and understanding meaning (? Communication: Definitions and Concepts). Much of a problematic intercultural communication stems from different ways that message is composed...

Zhang, Yan Bing

2008-01-01T23:59:59.000Z

93

REFERENCE CHECK QUESTIONS Candidate Name:_____________________ Date of Reference:_____________  

E-Print Network [OSTI]

are the candidate's most significant strengths? Any areas for improvement? If you were in a position to hire:_____________ Reference Name:_____________________ Company:____________________ Conducted by:_______________________ Phone (name) handle conflict? How about pressure? Stress? Describe the candidate's productivity, commitment

Provancher, William

94

Digital I and C system upgrade integration technique  

SciTech Connect (OSTI)

This work developed an integration technique for digital I and C system upgrade, the utility can replace the I and C systems step by step systematically by this method. Inst. of Nuclear Energy Research (INER) developed a digital Instrumentation and Control (I and C) replacement integration technique on the basis of requirement of the three existing nuclear power plants (NPPs), which are Chin-Shan (CS) NPP, Kuo-Sheng (KS) NPP, and Maanshan (MS) NPP, in Taiwan, and also developed the related Critical Digital Review (CDR) Procedure. The digital I and C replacement integration technique includes: (I) Establishment of Nuclear Power Plant Digital Replacement Integration Guideline, (2) Preliminary Investigation on I and C System Digitalization, (3) Evaluation on I and C System Digitalization, and (4) Establishment of I and C System Digitalization Architectures. These works can be a reference for performing I and C system digital replacement integration of the three existing NPPs of Taiwan Power Company (TPC). A CDR is the review for a critical system digital I and C replacement. The major reference of this procedure is EPRI TR- 1011710 (2005) 'Handbook for Evaluating Critical Digital Equipment and Systems' which was published by the Electric Power Research Inst. (EPRI). With this document, INER developed a TPC-specific CDR procedure. Currently, CDR becomes one of the policies for digital I and C replacement in TPC. The contents of this CDR procedure include: Scope, Responsibility, Operation Procedure, Operation Flow Chart, CDR review items. The CDR review items include the comparison of the design change, Software Verification and Validation (SVandV), Failure Mode and Effects Analysis (FMEA), Evaluation of Diversity and Defense-in-depth (D3), Evaluation of Watchdog Timer, Evaluation of Electromagnetic Compatibility (EMC), Evaluation of Grounding for System/Component, Seismic Evaluation, Witness and Inspection, Lessons Learnt from the Digital I and C Failure Events. A solid review can assure the quality of the digital I and C system replacement. (authors)

Huang, H. W. [Inst. of Nuclear Energy Research (INER), No. 1000, Wenhua Road, Chiaan Village, Longtan Township, Taoyuan County, 32546, Taiwan (China); Shih, C. [Inst. of Nuclear Engineering and Science, National Tsing Hua Univ., 101, Sec. 2, Kuang Fu Rd, Hsinchu, Taiwan (China); Wang, J. R. [Inst. of Nuclear Energy Research (INER), No. 1000, Wenhua Road, Chiaan Village, Longtan Township, Taoyuan County, 32546, Taiwan (China); Huang, K. C. [Inst. of Nuclear Engineering and Science, National Tsing Hua Univ., 101, Sec. 2, Kuang Fu Rd, Hsinchu, Taiwan (China)

2012-07-01T23:59:59.000Z

95

Reference wind farm selection for regional wind power prediction models  

E-Print Network [OSTI]

1 Reference wind farm selection for regional wind power prediction models Nils Siebert George.siebert@ensmp.fr, georges.kariniotakis@ensmp.fr Abstract Short-term wind power forecasting is recognized today as a major requirement for a secure and economic integration of wind generation in power systems. This paper deals

Paris-Sud XI, Université de

96

FAQS Reference Guide – Occupational Safety  

Broader source: Energy.gov [DOE]

This reference guide has been developed to address the competency statements in the July 2011 version of DOE-STD-1160-2011, Occupational Safety Functional Area Qualification Standard.

97

Aviation Safety Program Integrated Intelligent Flight Deck  

E-Print Network [OSTI]

Safety, Integrated Intelligent Flight Deck research project. It contains reference to past work as the other elements of NASA's Aviation Safety Program (AvSP). Without an integrated working relationshipAviation Safety Program Integrated Intelligent Flight Deck Technical Plan Summary Principal

98

Safeguards and Security Program References  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

The manual establishes definitions for terms related to the Department of Energy Safeguards and Security (S&S) Program and includes lists of references and acronyms/abbreviations applicable to S&S Program directives. Cancels the Safeguards and Security Glossary of Terms, dated 12-18-95. Current Safeguards and Security Program References can also be found at Safeguards and Security Policy Information Resource (http://pir.pnl.gov/)

2005-08-26T23:59:59.000Z

99

Quasinormal modes of D-dimensional de Sitter spacetime  

E-Print Network [OSTI]

We calculate the exact values of the quasinormal frequencies for an electromagnetic field and a gravitational perturbation moving in $D$-dimensional de Sitter spacetime ($D \\geq 4$). We also study the quasinormal modes of a real massive scalar field and we compare our results with those of other references.

A. López-Ortega

2006-11-02T23:59:59.000Z

100

REFERENCES  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Careerlumens_placard-green.epsEnergy1.pdfMarket37963American | DepartmentComments:16pm,January

Note: This page contains sample records for the topic "integration mode reference" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Characterization of interim reference shales  

SciTech Connect (OSTI)

Measurements have been made on the chemical and physical properties of two oil shales designated as interim reference oil shales by the Department of Energy. One oil shale is a Green River Formation, Parachute Creek Member, Mahogany Zone Colorado oil shale from the Anvil Points mine and the other is a Clegg Creek Member, New Albany shale from Kentucky. Material balance Fischer assays, kerogen concentrates, carbon aromaticities, thermal properties, and bulk mineralogic properties have been determined for the oil shales. The measured properties of the interim reference shales are comparable to results obtained from previous studies on similar shales. The western interim reference shale has a low carbon aromaticity, high Fischer assay conversion to oil, and a dominant carbonate mineralogy. The eastern interim reference shale has a high carbon aromaticity, low Fischer assay conversion to oil, and a dominant silicate mineralogy. Chemical and physical properties, including ASTM distillations, have been determined for shale oils produced from the interim reference shales. The distillation data were used in conjunction with API correlations to calculate a large number of shale oil properties that are required for computer models such as ASPEN. The experimental determination of many of the shale oil properties was beyond the scope of this study. Therefore, direct comparison between calculated and measured values of many properties could not be made. However, molecular weights of the shale oils were measured. In this case, there was poor agreement between measured molecular weights and those calculated from API and other published correlations. 23 refs., 12 figs., 15 tabs.

Miknis, F.P.; Sullivan, S.; Mason, G.

1986-03-01T23:59:59.000Z

102

Integrated Geophysical Exploration of a Known Geothermal Resource...  

Open Energy Info (EERE)

Neal Hot Springs Jump to: navigation, search OpenEI Reference LibraryAdd to library Book Section: Integrated Geophysical Exploration of a Known Geothermal Resource: Neal Hot...

103

Welfare State Integration of Immigrants: the Case of Germany  

E-Print Network [OSTI]

of immigrant integration in Germany; the good performance ofImmigrants: the Case of Germany References Beauftragte derImmigrants: the Case of Germany Friedrich Heckmann Managing

Heckmann, Friedrich

2012-01-01T23:59:59.000Z

104

WECC Variable Generation Planning Reference Book  

SciTech Connect (OSTI)

This planning reference book is a document reflecting a Western Electricity Coordination Council (WECC) effort to put together multiple sources of information and provide a clear, systemic, comprehensive outline of the problems, both existing and anticipated; their impacts on the system; currently used and proposed solutions by the industry and research community; planning practices; new technologies, equipment, and standards; and expected future trends. This living (periodically updated) document could help WECC and other practicing engineers, especially the younger generation of engineers joining the workforce, to get familiar with a large variety of information related to the integration of variable resources into the WECC system, bypassing in part the need for time-consuming information gathering and learning processes from more experienced engineers or from the literature.

Makarov, Yuri V.; Du, Pengwei; Etingov, Pavel V.; Ma, Jian; Vyakaranam, Bharat

2013-05-14T23:59:59.000Z

105

Optimum phase noise reduction and repetition rate tuning in quantum-dot mode-locked lasers  

SciTech Connect (OSTI)

Competing approaches exist, which allow control of phase noise and frequency tuning in mode-locked lasers, but no judgement of pros and cons based on a comparative analysis was presented yet. Here, we compare results of hybrid mode-locking, hybrid mode-locking with optical injection seeding, and sideband optical injection seeding performed on the same quantum dot laser under identical bias conditions. We achieved the lowest integrated jitter of 121 fs and a record large radio-frequency (RF) tuning range of 342?MHz with sideband injection seeding of the passively mode-locked laser. The combination of hybrid mode-locking together with optical injection-locking resulted in 240 fs integrated jitter and a RF tuning range of 167?MHz. Using conventional hybrid mode-locking, the integrated jitter and the RF tuning range were 620 fs and 10?MHz, respectively.

Habruseva, T. [CAPPA, Cork Institute of Technology, Cork (Ireland); Tyndall National Institute, Lee Maltings, Cork (Ireland); Aston University, Aston Triangle, B4 7ET Birmingham (United Kingdom); Arsenijevi?, D.; Kleinert, M.; Bimberg, D. [Institut für Festkörperphysik, Technische Universität Berlin, Berlin (Germany); Huyet, G.; Hegarty, S. P. [CAPPA, Cork Institute of Technology, Cork (Ireland); Tyndall National Institute, Lee Maltings, Cork (Ireland)

2014-01-13T23:59:59.000Z

106

Role of Smarter Grids in Variable Renewable Resource Integration (Presentation)  

SciTech Connect (OSTI)

This presentation discusses the role of smarter grids in variable renewable resource integration and references material from a forthcoming ISGAN issue paper: Smart Grid Contributions to Variable Renewable Resource Integration, co-written by the presenter and currently in review.

Miller, M.

2012-07-01T23:59:59.000Z

107

Quick Reference Card Context Help  

E-Print Network [OSTI]

LabVIEW TM Quick Reference Card Context Help When you move the cursor over LabVIEW objects, the Context Help window displays basic information about each object. Select Help»Show Context Help to display the Context Help window. LabVIEW Help Includes information about LabVIEW programming concepts, step

Oh, Paul

108

Polar Explorer References Raold Amundsen  

E-Print Network [OSTI]

-15, 2003, 1 h 19 min. * National Geographic May 2009, concerning claims of Arctic Ocean oil and gasPolar Explorer References Raold Amundsen My Life as an Explorer, Raold Amundsen The Red Tent.L. Berens [This book includes other historic polar explorers] * National Geographic Jan. 2009 (2 articles

Fabrikant, Sara Irina

109

REFERENCE AND BACKGROUND CHECK PROCESS  

E-Print Network [OSTI]

REFERENCE AND BACKGROUND CHECK PROCESS Workforce Planning | 408-924-2250 classcomp process. Workforce Planning will arrange this directly with the finalist(s) once the hiring manager has provided the finalist(s) name(s) to Workforce Planning. An exception to this process is for any candidates

Su, Xiao

110

Enterprise Microblogging for Advanced Knowledge Sharing: The References@BT Case Study  

E-Print Network [OSTI]

of knowledge, experiences and best-practices globally within the Building Technologies division. Launched networking service. In response to use demand, a new microblogging service, tightly integrated in 2005, References@BT features structured knowledge references, discussion forums, and a basic social

Hammerton, James

111

Slow modes in Keplerian disks  

E-Print Network [OSTI]

Low-mass disks orbiting a massive body can support "slow" normal modes, in which the eigenfrequency is much less than the orbital frequency. Slow modes are lopsided, i.e., the azimuthal wavenumber m=1. We investigate the properties of slow modes, using softened self-gravity as a simple model for collective effects in the disk. We employ both the WKB approximation and numerical solutions of the linear eigenvalue equation. We find that all slow modes are stable. Discrete slow modes can be divided into two types, which we label g-modes and p-modes. The g-modes involve long leading and long trailing waves, have properties determined by the self-gravity of the disk, and are only present in narrow rings or in disks where the precession rate is dominated by an external potential. In contrast, the properties of p-modes are determined by the interplay of self-gravity and other collective effects. P-modes involve both long and short waves, and in the WKB approximation appear in degenerate leading/trailing pairs. Disks support a finite number---sometimes zero---of discrete slow modes, and a continuum of singular modes.

Scott Tremaine

2000-11-30T23:59:59.000Z

112

A guided mode in the range of the radiation modes for a rib Exemple d'un mode guid'e plong'e parmi les modes de radiation  

E-Print Network [OSTI]

Journal of Optics 28 (1997) 41­43 Abstract The stratified cladding of integrated optical waveguides is dis''etude s'epar'ee des modes sym'etriques et antisym'etriques. In integrated optics the cross: \\Gamma 4u \\Gamma k 2 n 2 = \\Gammafi 2 u; in R 2 ; (1) where k is the wave number, fi the propaga­ tion

Mahé, Fabrice

113

Sandia National Laboratories: MODE  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -theErik Spoerke SSLS ExhibitIowaLos Alamos NationalMHK FloatingMLPE SandiaMODE

114

Reference repository design concept for bedded salt  

SciTech Connect (OSTI)

A reference design concept is presented for the subsurface portions of a nuclear waste repository in bedded salt. General geologic, geotechnical, hydrologic and geochemical data as well as descriptions of the physical systems are provided for use on generic analyses of the pre- and post-sealing performance of repositories in this geologic medium. The geology of bedded salt deposits and the regional and repository horizon stratigraphy are discussed. Structural features of salt beds including discontinuities and dissolution features are presented and their effect on repository performance is discussed. Seismic hazards and the potential effects of earthquakes on underground repositories are presented. The effect on structural stability and worker safety during construction from hydrocarbon and inorganic gases is described. Geohydrologic considerations including regional hydrology, repository scale hydrology and several hydrological failure modes are presented in detail as well as the hydrological considerations that effect repository design. Operational phase performance is discussed with respect to operations, ventilation system, shaft conveyances, waste handling and retrieval systems and receival rates of nuclear waste. Performance analysis of the post sealing period of a nuclear repository is discussed, and parameters to be used in such an analysis are presented along with regulatory constraints. Some judgements are made regarding hydrologic failure scenarios. Finally, the design and licensing process, consistent with the current licensing procedure is described in a format that can be easily understood.

Carpenter, D.W.; Martin, R.W.

1980-10-08T23:59:59.000Z

115

The Consumption of Reference Resources  

E-Print Network [OSTI]

Under the operational restriction of the U(1)-superselection rule, states that contain coherences between eigenstates of particle number constitute a resource. Such resources can be used to facilitate operations upon systems that otherwise cannot be performed. However, the process of doing this consumes reference resources. We show this explicitly for an example of a unitary operation that is forbidden by the U(1)-superselection rule.

G. A. White; J. A. Vaccaro; H. M. Wiseman

2008-11-22T23:59:59.000Z

116

HANFORD WASTE MINERALOGY REFERENCE REPORT  

SciTech Connect (OSTI)

This report lists the observed mineral phases present in the Hanford tanks. This task was accomplished by performing a review of numerous reports that used experimental techniques including, but not limited to: x-ray diffraction, polarized light microscopy, scanning electron microscopy, transmission electron microscopy, energy dispersive spectroscopy, electron energy loss spectroscopy, and particle size distribution analyses. This report contains tables that can be used as a quick reference to identify the crystal phases observed in Hanford waste.

DISSELKAMP RS

2010-06-29T23:59:59.000Z

117

HANFORD WASTE MINEROLOGY REFERENCE REPORT  

SciTech Connect (OSTI)

This report lists the observed mineral phase phases present in the Hanford tanks. This task was accomplished by performing a review of numerous reports using experimental techniques including, but not limited to: x-ray diffraction, polarized light microscopy, scanning electron microscopy, transmission electron microscopy, energy dispersive spectroscopy, electron energy loss spectroscopy, and particle size distribution analyses. This report contains tables that can be used as a quick reference to identify the crystal phases present observed in Hanford waste.

DISSELKAMP RS

2010-06-18T23:59:59.000Z

118

The soil reference shrinkage curve  

E-Print Network [OSTI]

A recently proposed model showed how a clay shrinkage curve is transformed to the soil shrinkage curve at the soil clay content higher than a critical one. The objective of the present work was to generalize this model to the soil clay content lower a critical one. I investigated (i) the reference shrinkage curve, that is, one without cracks; (ii) the superficial layer of aggregates, with changed pore structure compared with the intraaggregate matrix; and (iii) soils with sufficiently low clay content where there are large pores inside the intraaggregate clay (so-called lacunar pores). The methodology is based on detail accounting for different contributions to the soil volume and water content during shrinkage. The key point is the calculation of the lacunar pore volume variance at shrinkage. The reference shrinkage curve is determined by eight physical soil parameters: (1) oven-dried specific volume; (2) maximum swelling water content; (3) mean solid density; (4) soil clay content; (5) oven-dried structural porosity; (6) the ratio of aggregate solid mass to solid mass of intraaggregate matrix; (7) the lacunar factor that characterizes the rate of the lacunar pore volume change with water content; and (8) oven-dried lacunar pore volume. The model was validated using available data. The model predicted value of the slope of the reference shrinkage curve in the basic shrinkage area is equal to unity minus the lacunar factor value, and is between unity and zero in the agreement with observations.

V. Y. Chertkov

2014-03-11T23:59:59.000Z

119

Grid Integration  

SciTech Connect (OSTI)

Summarizes the goals and activities of the DOE Solar Energy Technologies Program efforts within its grid integration subprogram.

Not Available

2008-09-01T23:59:59.000Z

120

Reference Inflow Characterization for River Resource Reference Model (RM2)  

SciTech Connect (OSTI)

Sandia National Laboratory (SNL) is leading an effort to develop reference models for marine and hydrokinetic technologies and wave and current energy resources. This effort will allow the refinement of technology design tools, accurate estimates of a baseline levelized cost of energy (LCoE), and the identification of the main cost drivers that need to be addressed to achieve a competitive LCoE. As part of this effort, Oak Ridge National Laboratory was charged with examining and reporting reference river inflow characteristics for reference model 2 (RM2). Published turbulent flow data from large rivers, a water supply canal and laboratory flumes, are reviewed to determine the range of velocities, turbulence intensities and turbulent stresses acting on hydrokinetic technologies, and also to evaluate the validity of classical models that describe the depth variation of the time-mean velocity and turbulent normal Reynolds stresses. The classical models are found to generally perform well in describing river inflow characteristics. A potential challenge in river inflow characterization, however, is the high variability of depth and flow over the design life of a hydrokinetic device. This variation can have significant effects on the inflow mean velocity and turbulence intensity experienced by stationary and bottom mounted hydrokinetic energy conversion devices, which requires further investigation, but are expected to have minimal effects on surface mounted devices like the vertical axis turbine device designed for RM2. A simple methodology for obtaining an approximate inflow characterization for surface deployed devices is developed using the relation umax=(7/6)V where V is the bulk velocity and umax is assumed to be the near-surface velocity. The application of this expression is recommended for deriving the local inflow velocity acting on the energy extraction planes of the RM2 vertical axis rotors, where V=Q/A can be calculated given a USGS gage flow time-series and stage vs. cross-section area rating relationship.

Neary, Vincent S [ORNL

2011-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "integration mode reference" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Electron geodesic acoustic modes in electron temperature gradient mode turbulence  

SciTech Connect (OSTI)

In this work, the first demonstration of an electron branch of the geodesic acoustic mode (el-GAM) driven by electron temperature gradient (ETG) modes is presented. The work is based on a fluid description of the ETG mode retaining non-adiabatic ions and the dispersion relation for el-GAMs driven nonlinearly by ETG modes is derived. A new saturation mechanism for ETG turbulence through the interaction with el-GAMs is found, resulting in a significantly enhanced ETG turbulence saturation level compared to the mixing length estimate.

Anderson, Johan; Nordman, Hans [Department of Earth and Space Sciences, Chalmers University of Technology, SE-412 96 Goeteborg (Sweden); Singh, Raghvendra; Kaw, Predhiman [Institute for Plasma Research, Bhat, Gandhinagar, Gujarat 382428 (India)

2012-08-15T23:59:59.000Z

122

PVWatts Version 1 Technical Reference  

SciTech Connect (OSTI)

The NREL PVWatts(TM) calculator is a web application developed by the National Renewable Energy Laboratory (NREL) that estimates the electricity production of a grid-connected photovoltaic system based on a few simple inputs. PVWatts combines a number of sub-models to predict overall system performance, and makes several hidden assumptions about performance parameters. This technical reference details the individual sub-models, documents assumptions and hidden parameters, and explains the sequence of calculations that yield the final system performance estimation.

Dobos, A. P.

2013-10-01T23:59:59.000Z

123

Document Number Q0029500 References  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofofOxford SiteToledo SiteTonawanda North SiteD&Dir^0 0References

124

Tips: References | Department of Energy  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassiveSubmittedStatusButler Tina Butler Tina-Butler.jpg TinaLaundryReferences Tips:

125

References | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartmentNationalRestart of the Review of theOFFICE OF CIVIL RIGHTS/%2ABuildingReferences |

126

Desk Reference | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in Review: TopEnergy DOEDealingVehicle Battery Plant |DepartmentDesk Reference Desk

127

Hybridization process for back-illuminated silicon Geiger-mode avalanche photodiode arrays  

E-Print Network [OSTI]

We present a unique hybridization process that permits high-performance back-illuminated silicon Geiger-mode avalanche photodiodes (GM-APDs) to be bonded to custom CMOS readout integrated circuits (ROICs) - a hybridization ...

Schuette, Daniel R.

128

Microfluidic Large-Scale Integration: The Evolution  

E-Print Network [OSTI]

Microfluidic Large-Scale Integration: The Evolution of Design Rules for Biological Automation, polydimethylsiloxane Abstract Microfluidic large-scale integration (mLSI) refers to the develop- ment of microfluidic, are discussed. Several microfluidic components used as building blocks to create effective, complex, and highly

Quake, Stephen R.

129

Method to calibrate fission chambers in Campbelling mode  

SciTech Connect (OSTI)

Fission chambers are neutron detectors which are widely used to instrument experimental reactors such as material testing reactors or zero power reactors. In the presence of a high level mixed gamma and neutron flux, fission chambers can be operated in Campbelling mode (also known as 'fluctuation mode' or 'mean square voltage mode') to provide reliable and precise neutron related measurements. Fission chamber calibration in Campbelling mode (in terms of neutron flux) is usually done empirically using a calibrated reference detector. A major drawback of this method is that calibration measurements have to be performed in a neutron environment very similar to the one in which the calibrated detector will be used afterwards. What we propose here is a different approach based on characterizing the fission chamber response in terms of fission rate. This way, the detector calibration coefficient is independent from the neutron spectrum and can be determined prior to the experiment. The fissile deposit response to the neutron spectrum can then be assessed independently by other means (experimental or numerical). In this paper, the response of CEA made miniature fission chambers in Campbelling mode is studied. We use a theoretical model of the signal to calculate the calibration coefficient. Input parameters of the model come from statistical distribution of individual pulses. Supporting measurements have been made in the CEA Cadarache zero power reactor MINERVE. Results are compared to an empirical Campbelling mode calibration.

Benoit Geslot; Troy C. Unruh; Philippe Filliatre; Christian Jammes; Jacques Di Salvo; Stéphane Bréaud; Jean-François Villard

2011-06-01T23:59:59.000Z

130

Photon detection efficiency of Geiger-mode avalanche photodiodes  

E-Print Network [OSTI]

The photon detection efficiencies of multi-pixel Geiger-mode avalanche photodiodes manufactured by different produ cers are estimated. A new fit method of the response spectra to low-intensity light, taking into ac count after-pulse and cross-talk effects is proposed to yield the initial number of photons. The value of photon detection efficiency is calculated using a calibrated photodetector as a reference.

Simonetta Gentile; Ekaterina Kuznetsova; Franco Meddi

2010-06-16T23:59:59.000Z

131

SAPHIRE 8 Volume 2 - Technical Reference  

SciTech Connect (OSTI)

The Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) refers to a set of computer programs that were developed to create and analyze probabilistic risk assessment (PRAs). Herein information is provided on the principles used in the construction and operation of Version 8.0 of the SAPHIRE system. This report summarizes the fundamental mathematical concepts of sets and logic, fault trees, and probability. This volume then describes the algorithms used to construct a fault tree and to obtain the minimal cut sets. It gives the formulas used to obtain the probability of the top event from the minimal cut sets, and the formulas for probabilities that apply for various assumptions concerning reparability and mission time. It defines the measures of basic event importance that SAPHIRE can calculate. This volume gives an overview of uncertainty analysis using simple Monte Carlo sampling or Latin Hypercube sampling, and states the algorithms used by this program to generate random basic event probabilities from various distributions. Also covered are enhance capabilities such as seismic analysis, Workspace algorithms, cut set "recovery," end state manipulation, and use of "compound events."

C. L. Smith; S. T. Wood; W. J. Galyean; J. A. Schroeder; M. B. Sattison

2011-03-01T23:59:59.000Z

132

Insolation integrator  

DOE Patents [OSTI]

An electric signal representative of the rate of insolation is integrated to determine if it is adequate for operation of a solar energy collection system.

Dougherty, John J. (Norristown, PA); Rudge, George T. (Lansdale, PA)

1980-01-01T23:59:59.000Z

133

Hawking radiation and Quasinormal modes  

E-Print Network [OSTI]

The spectrum of Hawking radiation by quantum fields in the curved spacetime is continuous, so the explanation of Hawking radiation using quasinormal modes can be suspected to be impossible. We find that quasinormal modes do not explain the relation between the state observed in a region far away from a black hole and the short distance behavior of the state on the horizon.

SangChul Yoon

2005-10-05T23:59:59.000Z

134

Mediating Religion: Modes of Communication  

E-Print Network [OSTI]

Mediating Religion: Modes of Communication in Religious Contexts Keynote: Dr. Lerone Martin, particularly given recent innovations in mass media and digital communications technologies. Turning attention to modes of communication in religious contexts, this conference will address ways in which mass media have

Indiana University

135

National Environmental Information Infrastructure Reference Architecture  

E-Print Network [OSTI]

National Environmental Information Infrastructure Reference Architecture Consultation Draft Environmental Information Infrastructure Reference Architecture: Consultation Draft Environmental Information Contributing to the Australian Government National Plan for Environmental Information initiative #12;National

Greenslade, Diana

136

E-Print Network 3.0 - activation resonance integrals Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

integrating two resonant modes was proposed... -capacitor resonator variant in the terahertz regime. In contrast to earlier proposed structures, we demonstrate... that a...

137

Economic Impact of Standard Reference Materials  

E-Print Network [OSTI]

00-1 Planning Report Economic Impact of Standard Reference Materials for Sulfur in Fossil Fuels Administration #12;February 2000 Economic Impact of Standard Reference Materials for Sulfur in Fossil Fuels Final-006 Economic Impact of Standard Reference Materials for Sulfur in Fossil Fuels Final Report February 2000

138

Mode synthesizing atomic force microscopy and mode-synthesizing sensing  

DOE Patents [OSTI]

A method of analyzing a sample that includes applying a first set of energies at a first set of frequencies to a sample and applying, simultaneously with the applying the first set of energies, a second set of energies at a second set of frequencies, wherein the first set of energies and the second set of energies form a multi-mode coupling. The method further includes detecting an effect of the multi-mode coupling.

Passian, Ali; Thundat, Thomas George; Tetard, Laurene

2013-05-17T23:59:59.000Z

139

Interaction of fast particles and Alfven modes in burning plasmas  

SciTech Connect (OSTI)

In this paper we study the interaction of fast particles with Alfvenic instabilities in Tokamak plasmas, with reference to present-day experiments that exploit strong energetic particle heating (namely, JT-60U) and the consistency of proposed ITER burning plasma scenarios. Concerning JT-60U, two different types of bursting modes have been observed by MHD spectrography in auxiliary heated (NNB) discharges. One of these modes has been dubbed fast frequency sweeping (fast FS) mode. It is characterized by a timescale of the order of few milliseconds and frequencies branching upwards and downwards. The other mode, called the abrupt large-amplitude event (ALE), has shorter timescale (order of hundred microseconds) and larger amplitude. On the occurrence of ALEs, a significant reduction of the neutron emission rate in the central plasma region is observed. Such a change has been attributed to a redistribution of the energetic ions, with a marked reduction of their on-axis density. We present an interpretation of these experimental observations, based on the results of nonlinear particle simulations performed by the Hybrid MHD-Gyrokinetic Code HMGC.Concerning ITER, monotonic-q (scenario 2) and reversed-shear (scenario 4) equilibria are considered. Also an ITER hybrid scenario is examined and quantitatively compared with the previous ones. The transition from the low-amplitude Alfvenic instability saturation to the secondary excitation of a stronger mode is addressed, and its effect on the energetic particle transport analyzed.

Vlad, G.; Briguglio, S.; Fogaccia, G.; Zonca, F. [Associazione EURATOM-ENEA, CR ENEA-Frascati, Via E. Fermi 45, 00044 Frascati (Rome) (Italy)

2006-11-30T23:59:59.000Z

140

Peeling mode relaxation ELM model  

SciTech Connect (OSTI)

This paper discusses an approach to modelling Edge Localised Modes (ELMs) in which toroidal peeling modes are envisaged to initiate a constrained relaxation of the tokamak outer region plasma. Relaxation produces both a flattened edge current profile (which tends to further destabilise a peeling mode), and a plasma-vacuum negative current sheet which has a counteracting stabilising influence; the balance that is struck between these two effects determines the radial extent (rE) of the ELM relaxed region. The model is sensitive to the precise position of the mode rational surfaces to the plasma surface and hence there is a 'deterministic scatter' in the results that has an accord with experimental data. The toroidal peeling stability criterion involves the edge pressure, and using this in conjunction with predictions of rE allows us to evaluate the ELM energy losses and compare with experiment. Predictions of trends with the edge safety factor and collisionality are also made.

Gimblett, C. G. [EURATOM/UKAEA Fusion Association, Culham Science Centre Abingdon, Oxon, OX14 3DB (United Kingdom)

2006-11-30T23:59:59.000Z

Note: This page contains sample records for the topic "integration mode reference" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Existence of Metastable Kinetic Modes  

SciTech Connect (OSTI)

The nonlinear evolution of resonantly driven systems, such as suprathermal particle driven modes in magnetically confined plasmas, is shown to strongly depend on the existence and nature of an underlying damping mechanism. When background resonant damping is present, subcritical states can take place. In particular, purely nonlinear steady-state regimes are found, whose destabilization threshold and saturation levels are calculated and validated using numerical simulations. This nonlinear behavior can be of relevance for acoustic modes in magnetically confined plasmas.

Nguyen, C.; Luetjens, H.; Garbet, X.; Grandgirard, V.; Lesur, M. [Centre de Physique Theorique, CNRS-Ecole Polytechnique, Palaiseau (France); CEA, IRFM, F-13108 Saint-Paul-lez-Durance (France); JAEA, Higashi-Ueno 6-9-3, Taitou, Tokyo, 110-0015 (Japan)

2010-11-12T23:59:59.000Z

142

Reference Links | U.S. DOE Office of Science (SC)  

Office of Science (SC) Website

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched5 IndustrialIsadore Perlman, 1960Real Property Management IntegratedReference Links

143

An Integrated Model For The Geothermal Field Of Milos From Geophysical...  

Open Energy Info (EERE)

search OpenEI Reference LibraryAdd to library Journal Article: An Integrated Model For The Geothermal Field Of Milos From Geophysical Experiments Abstract The results of...

144

Occupant satisfaction in mixed-mode buildings.  

E-Print Network [OSTI]

Strategies for Mixed-Mode Buildings, Summary Report, CenterCBE). 2006. Website: Mixed-Mode Building Case Studies.Department of Environmental Building Research Establishment

Brager, Gail; Baker, Lindsay

2008-01-01T23:59:59.000Z

145

Occupant satisfaction in mixed-mode buildings  

E-Print Network [OSTI]

Environmental Quality in Green Buildings”. Indoor Air; 14 (Strategies for Mixed-Mode Buildings, Summary Report, CenterCBE). 2006. Website: Mixed-Mode Building Case Studies.

Brager, Gail; Baker, Lindsay

2009-01-01T23:59:59.000Z

146

FAQS Reference Guide – General Technical Base  

Broader source: Energy.gov [DOE]

This reference guide addresses the competency statements in the December 2007 edition of DOE-STD-1146-2007, General Technical Base Functional Area Qualification Standard.

147

FAQS Reference Guide – Facility Maintenance Management  

Broader source: Energy.gov [DOE]

This reference guide addresses the competency statements in the April 2014 edition of DOE Standard DOE-STD-1181-2014, Facility Maintenance Management Functional Area Qualification Standard.

148

Frequenz, Vol. 65 (2011), pp. 287292 Copyright 2011 De Gruyter. DOI 10.1515/FREQ.2011.042 A Mode-matching Approach for the Analysis and Design  

E-Print Network [OSTI]

of new fabrication techniques, especially laser drilling of via holes, more arbitrary via shapes become. An example of a four- pole dual-mode filter in substrate-integrated wave-guide technology illustrates the capabilities of the approach. Keywords. Mode-matching techniques, substrate- integrated wave-guide technology

Bornemann, Jens

149

Modeling, Analysis, and Design of Stationary Reference Frame Droop Controlled Parallel Three-  

E-Print Network [OSTI]

the performance and robustness of the parallel VSI system control architecture. Keywords: Distributed Generation. In addition, power electronics-based MGs are useful when integrating renewable energy resources, distributed in island mode, restoring the frequency and amplitude in spite of deviations created by the total amount

Teodorescu, Remus

150

Modeling, Analysis, and Design of Stationary Reference Frame Droop Controlled Parallel Three-  

E-Print Network [OSTI]

the main grid and the VSIs. Keywords: Distributed Generation (DG), Droop method, Hierarchical control islanded and grid-connected operations, allowing a seamless transition between these modes through control are useful when integrating renewable energy resources, distributed energy storage systems and active loads

Vasquez, Juan Carlos

151

Developing and Integrating Sustainable Chemical Processes into Existing Petro-Chemical Plant Complexes  

E-Print Network [OSTI]

Developing and Integrating Sustainable Chemical Processes into Existing Petro-Chemical Plant Complexes #12;Outline · Introduction to Sustainable Development · Research Vision · Biomass conversion of biotechnology in existing plant complex · Conclusions #12;Sustainability Sustainability refers to integrating

Pike, Ralph W.

152

Archived Reference Building Type: Medium office  

Broader source: Energy.gov [DOE]

Here you will find past versions of the commercial reference building models for existing buildings constructed in or after 1980, organized by building type and location. A summary of building types and climate zones is available for reference. Current versions are also available.

153

Archived Reference Building Type: Medium office  

Broader source: Energy.gov [DOE]

Here you will find past versions of the commercial reference building models for existing buildings constructed before 1980, organized by building type and location. A summary ofbuilding types and climate zones is available for reference. Current versions are also available.

154

Milli-Q Reference Water Purification System  

E-Print Network [OSTI]

Milli-Q® Reference Water Purification System The reference for ultrapure water systems EMD water, the system produces ultrapure water adapted to your specific applications and exceeding the requirements of the most demanding norms. We've achieved all this with a new purification strategy. Water

Woodall, Jerry M.

155

Archived Reference Building Type: Secondary school  

Broader source: Energy.gov [DOE]

Here you will find past versions of the commercial reference building models for existing buildings constructed in or after 1980, organized by building type and location. A summary of building types and climate zones is available for reference. Current versions are also available.

156

Archived Reference Building Type: Secondary school  

Broader source: Energy.gov [DOE]

Here you will find past versions of the commercial reference building models for existing buildings constructed before 1980, organized by building type and location. A summary ofbuilding types and climate zones is available for reference. Current versions are also available.

157

Health physics research reactor reference dosimetry  

SciTech Connect (OSTI)

Reference neutron dosimetry is developed for the Health Physics Research Reactor (HPRR) in the new operational configuration directly above its storage pit. This operational change was physically made early in CY 1985. The new reference dosimetry considered in this document is referred to as the 1986 HPRR reference dosimetry and it replaces any and all HPRR reference documents or papers issued prior to 1986. Reference dosimetry is developed for the unshielded HPRR as well as for the reactor with each of five different shield types and configurations. The reference dosimetry is presented in terms of three different dose and six different dose equivalent reporting conventions. These reporting conventions cover most of those in current use by dosimetrists worldwide. In addition to the reference neutron dosimetry, this document contains other useful dosimetry-related data for the HPRR in its new configuration. These data include dose-distance measurements and calculations, gamma dose measurements, neutron-to-gamma ratios, ''9-to-3 inch'' ratios, threshold detector unit measurements, 56-group neutron energy spectra, sulfur fluence measurements, and details concerning HPRR shields. 26 refs., 11 figs., 31 tabs.

Sims, C.S.; Ragan, G.E.

1987-06-01T23:59:59.000Z

158

Archived Reference Building Type: Outpatient health care  

Broader source: Energy.gov [DOE]

Here you will find past versions of the commercial reference building models for existing buildings constructed in or after 1980, organized by building type and location. A summary of building types and climate zones is available for reference. Current versions are also available.

159

Archived Reference Building Type: Outpatient health care  

Broader source: Energy.gov [DOE]

Here you will find past versions of the commercial reference building models for existing buildings constructed before 1980, organized by building type and location. A summary ofbuilding types and climate zones is available for reference. Current versions are also available.

160

TEMPLATE-BASED HIRE QUICK REFERENCE  

E-Print Network [OSTI]

above, contact the HR Help Desk at 220-5932. Other Job Aids and Quick Reference Guides (QRG) Refer to the following job aids and QRGs on the HR website under Administrators --> Tools and Resources for extra help the Template-Based Hire for approval. If you need help with editing your Template-Based Hire or with the steps

Calgary, University of

Note: This page contains sample records for the topic "integration mode reference" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Phase space theory of Bose-Einstein condensates and time-dependent modes  

E-Print Network [OSTI]

A phase space theory approach for treating dynamical behaviour of Bose-Einstein condensates applicable to situations such as interferometry with BEC in time-dependent double well potentials is presented. Time-dependent mode functions are used, chosen so that one, two,.. highly occupied modes describe well the physics of interacting condensate bosons in time dependent potentials at well below the transition temperature. Time dependent mode annihilation, creation operators are represented by time dependent phase variables, but time independent total field annihilation, creation operators are represented by time independent field functions. Two situations are treated, one (mode theory) is where specific mode annihilation, creation operators and their related phase variables and distribution functions are dealt with, the other (field theory) is where only field creation, annihilation operators and their related field functions and distribution functionals are involved. The paper focuses on the hybrid approach, where the modes are divided up between condensate (highly occupied) modes and non-condensate (sparsely occupied) modes. It is found that there are extra terms in the Ito stochastic equations both for the stochastic phases and stochastic fields, involving coupling coefficients defined via overlap integrals between mode functions and their time derivatives. For the hybrid approach both the Fokker-Planck and functional Fokker-Planck equations differ from those derived via the correspondence rules, the drift vectors are unchanged but the diffusion matrices contain additional terms involving the coupling coefficients. Results are also presented for the combined approach where all the modes are treated as one set.

B. J. Dalton

2012-07-20T23:59:59.000Z

162

Method of pedestal and common-mode noise correction for switched-capacitor analog memories  

DOE Patents [OSTI]

A method and apparatus are disclosed for correcting common-mode noise and pedestal noise in a multichannel array of switched-capacitor analog memories wherein each analog memory is connected to an associated analog-to-digital converter. The apparatus comprises a single differential element in two different embodiments. In a first embodiment, the differential element is a reference analog memory connected to a buffer. In the second embodiment, the differential element is a reference analog memory connected to a reference analog-to-digital connected to an array of digital summing circuits. 4 figs.

Britton, C.L.

1996-12-31T23:59:59.000Z

163

An Integrated Geophysical Analysis Of The Upper Crust Of The...  

Open Energy Info (EERE)

Of The Upper Crust Of The Southern Kenya Rift Jump to: navigation, search OpenEI Reference LibraryAdd to library Journal Article: An Integrated Geophysical Analysis Of The Upper...

164

Nuclear Forensic Reference Materials (RM) for Attribution of Urban Nuclear Terrorism  

E-Print Network [OSTI]

is the integration of all information, including nuclear forensic data, law enforcement and intelligence dataNuclear Forensic Reference Materials (RM) for Attribution of Urban Nuclear Terrorism Kenneth G relationships Nuclear Forensics require high-level expertise, undisputed signatures & extremely high fidelity

Perkins, Richard A.

165

A Reference Process to Design Information Systems for Sustainable Design based on LCA, PSS, Social and  

E-Print Network [OSTI]

A Reference Process to Design Information Systems for Sustainable Design based on LCA, PSS, Social of Sustainable Design, SD, is to satisfy customer needs while reducing environmental impacts. The main challenge of a Service-Oriented Architecture, SOA, is appropriate because of its integration requirements. SOA best

Boyer, Edmond

166

Chemical preconcentrator with integral thermal flow sensor  

DOE Patents [OSTI]

A chemical preconcentrator with integral thermal flow sensor can be used to accurately measure fluid flow rate in a microanalytical system. The thermal flow sensor can be operated in either constant temperature or constant power mode and variants thereof. The chemical preconcentrator with integral thermal flow sensor can be fabricated with the same MEMS technology as the rest of the microanlaytical system. Because of its low heat capacity, low-loss, and small size, the chemical preconcentrator with integral thermal flow sensor is fast and efficient enough to be used in battery-powered, portable microanalytical systems.

Manginell, Ronald P. (Albuquerque, NM); Frye-Mason, Gregory C. (Cedar Crest, NM)

2003-01-01T23:59:59.000Z

167

Clause chaining, switch reference and coordination  

E-Print Network [OSTI]

In this thesis I ponder over a constellation of phenomena that revolve around switch reference and coordination, drawing mainly on their instantiation in Kisedje (Je, Brazil). I start by investigating Klsedje's case system. ...

Nonato, Rafael

2014-01-01T23:59:59.000Z

168

New Construction Commercial Reference Buildings — Archive  

Broader source: Energy.gov [DOE]

Here you will find past versions of the reference buildings for new construction commercial buildings, organized by building type and location. A summary of building types and climate zones is...

169

FAQS Reference Guide – Safety Software Quality Assurance  

Broader source: Energy.gov [DOE]

This reference guide has been developed to address the competency statements in the (March 2011) edition of DOE-STD-1172-2011, Safety Software Quality Assurance Functional Area Qualification Standard.

170

Red Band Needle Blight TERMS OF REFERENCE  

E-Print Network [OSTI]

Red Band Needle Blight TERMS OF REFERENCE Purpose 1. The Programme Board has been formed to have an overview of the administration and science of Red Band Needle Blight (RBNB), to underpin decisions made

171

An expectation model of referring expressions  

E-Print Network [OSTI]

This thesis introduces EMRE, an expectation-based model of referring expressions. EMRE is proposed as a model of non-syntactic dependencies - in particular, discourse-level semantic dependencies that bridge sentence gaps. ...

Krćmer, John, Ph. D. Massachusetts Institute of Technology

2010-01-01T23:59:59.000Z

172

Archive Reference Buildings by Building Type: Warehouse  

Broader source: Energy.gov [DOE]

Here you will find past versions of the reference buildings for new construction commercial buildings, organized by building type and location. A summary of building types and climate zones is...

173

Archive Reference Buildings by Building Type: Supermarket  

Broader source: Energy.gov [DOE]

Here you will find past versions of the reference buildings for new construction commercial buildings, organized by building type and location. A summary of building types and climate zones is...

174

Introducing Reference Semantics via Refinement Graeme Smith  

E-Print Network [OSTI]

Introducing Reference Semantics via Refinement Graeme Smith Software Verification Research Centre, University of Queensland, Australia smith@svrc.uq.edu.au Abstract. Two types of semantics have been given

Smith, Graeme

175

Generating and interpreting referring expressions in context  

E-Print Network [OSTI]

Referring expressions with vague and ambiguous modifiers, such as "a quick visit" and "the big meeting," are difficult for computers to interpret because their meanings are defined in part by context. For the hearer to ...

Smith, Dustin Arthur

2013-01-01T23:59:59.000Z

176

Electromagnetic Radiation REFERENCE: Remote Sensing of  

E-Print Network [OSTI]

1 CHAPTER 2: Electromagnetic Radiation Principles REFERENCE: Remote Sensing of the Environment John;2 Electromagnetic Energy Interactions Energy recorded by remote sensing systems undergoes fundamental interactions, creating convectional currents in the atmosphere. c) Electromagnetic energy in the form of electromagnetic

Gilbes, Fernando

177

Quantum communication, reference frames and gauge theory  

E-Print Network [OSTI]

We consider quantum communication in the case that the communicating parties not only do not share a reference frame but use imperfect quantum communication channels, in that each channel applies some fixed but unknown unitary rotation to each qubit. We discuss similarities and differences between reference frames within that quantum communication model and gauge fields in gauge theory. We generalize the concept of refbits and analyze various quantum communication protocols within the communication model.

S. J. van Enk

2006-04-26T23:59:59.000Z

178

"Analysis of SOFCs using reference electrodes?  

SciTech Connect (OSTI)

Reference electrodes are frequently applied to isolate the performance of one electrode in a solid oxide fuel cell. However, reference electrode simulations raise doubt to veracity of data collected using reference electrodes. The simulations predict that the reported performance for the one electrode will frequently contain performance of both electrodes. Nonetheless, recent reports persistently treat data so collected as ideally isolated. This work confirms the predictions of the reference electrode simulations on two SOFC designs, and to provides a method of validating the data measured in the 3-electrode configuration. Validation is based on the assumption that a change in gas composition to one electrode does not affect the impedance of the other electrode at open circuit voltage. This assumption is supported by a full physics simulation of the SOFC. Three configurations of reference electrode and cell design are experimentally examined using various gas flows and two temperatures. Impedance data are subjected to deconvolution analysis and equivalent circuit fitting and approximate polarization resistances of the cathode and anode are determined. The results demonstrate that the utility of reference electrodes is limited and often wholly inappropriate. Reported impedances and single electrode polarization values must be scrutinized on this basis.

Finklea, Harry; Chen,Xiaoke; Gerdes,Kirk; Pakalapati, Suryanarayana; Celik, Ismail

2013-07-01T23:59:59.000Z

179

GOVERNANCE DOCUMENT DEPARTMENT OF INTEGRATIVE BIOLOGY  

E-Print Network [OSTI]

1 GOVERNANCE DOCUMENT DEPARTMENT OF INTEGRATIVE BIOLOGY January 23, 2014 The faculty otherwise specified, the following document refers to the IB Department and its personnel only. 1 with the Regular Faculty. The Search Committee will develop a list of candidates, manage the interviews

Lajeunesse, Marc J.

180

Vibrational Modes of Adsorbed Atoms  

E-Print Network [OSTI]

, because the interaction. a d t ion is weak corn pared to the Ne-A , n the 11. and ].~m ' w e 1V mode. modes lie below the In comparisons with the mass-def y eing a measure of the mass divided C. Ne on Kr The three" rin"p incipal surface mod... represe~t~~g lo or izontal" polari- 0 P) 0 CU 0 2v 1H 1L 4H e - XENON FIG. 1. Dimens' are ni nsionless f nine substrate requency (d* o- ' 'o a layers b vs two- d b 1 I" ng y try ' o He on Xe. There 15 5081 5082 R LA%REN C E AND R . E...

LAWRENCE, WR; Allen, Roland E.

1977-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "integration mode reference" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Quantum simulation of Dirac fermion mode, Majorana fermion mode and Majorana-Weyl fermion mode in cavity QED lattice  

E-Print Network [OSTI]

Quantum simulation aims to simulate a quantum system using a controble laboratory system that underline the same mathematical model. Cavity QED lattice system is that prescribe system to simulate the relativistic quantum effect. We quantum simulate the Dirac fermion mode, Majorana fermion mode and Majorana-Weyl fermion mode and a crossover between them in cavity QED lattice. We also present the different analytical relations between the field operators for different mode excitations.

Sujit Sarkar

2014-09-11T23:59:59.000Z

182

Development and Use of the Dual-Mode Plasma Torch  

SciTech Connect (OSTI)

After several years of development, a commercially available high-temperature treatment system has been developed and installed that treats heterogeneous low-level radioactive waste. High temperature plasma processing, unique torch design and operating features make it feasible to achieve a volume reduced, permanent, high integrity waste form while eliminating the personnel exposure and costs associated with conventional sorting, characterizing and handling. Plasma technology can also be used to treat previous conditioned waste packages that no longer meet the current acceptance criteria for final disposal. Plasma treatment can result, in many cases, in a substantial volume reduction, which lowers the final disposal costs. This paper covers the recently patented dual mode plasma torch design(1), the lessons learned that fostered its development and the advantages it brings to radioactive waste processing. This paper also provides current full scale Plasma Arc Centrifugal Treatment (PACT) project status and how the dual mode torch is being used in the PACT system.

Womack, R.; Shuey, M.

2002-02-26T23:59:59.000Z

183

Bures distance as a measure of entanglement for two-mode squeezed thermal states  

SciTech Connect (OSTI)

We propose a reliable entanglement measure for a two-mode squeezed thermal state of the quantum electromagnetic field in terms of its Bures distance to the set of all separable states of the same kind. The requisite fidelity of a pair of two-mode squeezed thermal states is exactly evaluated. By applying the Peres-Simon criterion of separability, we find the closest separable state. This enables us to establish an insightful expression of the amount of entanglement. We also derive the relative entropy of a two-mode squeezed thermal state with respect to another one. This quantity is exploited in the pure-state case by undertaking a similar approximation for the entropic entanglement of a two-mode squeezed vacuum state. Comparison with previous work lends support to our approach that replaces the reference set of all separable Gaussian states by its subset consisting only of the squeezed thermal ones.

Marian, Paulina [Institute for Theoretical Atomic, Molecular and Optical Physics, Harvard-Smithsonian Center for Astrophysics, Cambridge, Massachusetts 02138 (United States); Department of Chemistry, University of Bucharest, Boulevard Regina Elisabeta 4-12, R-030018 Bucharest (Romania); Marian, Tudor A. [Institute for Theoretical Atomic, Molecular and Optical Physics, Harvard-Smithsonian Center for Astrophysics, Cambridge, Massachusetts 02138 (United States); Department of Physics, University of Bucharest, P.O. Box MG-11, R-077125 Bucharest-Magurele (Romania); Scutaru, Horia [Center for Advanced Studies in Physics of the Romanian Academy, Calea 13 Septembrie 13, R-050711 Bucharest (Romania)

2003-12-01T23:59:59.000Z

184

Optical waveguides having flattened high order modes  

DOE Patents [OSTI]

A deterministic methodology is provided for designing optical fibers that support field-flattened, ring-like higher order modes. The effective and group indices of its modes can be tuned by adjusting the widths of the guide's field-flattened layers or the average index of certain groups of layers. The approach outlined here provides a path to designing fibers that simultaneously have large mode areas and large separations between the propagation constants of its modes.

Messerly, Michael Joseph; Beach, Raymond John; Heebner, John Edward; Dawson, Jay Walter; Pax, Paul Henry

2014-08-05T23:59:59.000Z

185

Broadband frequency mode entanglement in waveguided PDC  

E-Print Network [OSTI]

We report the observation of beatings of the coincidence event rate in a Hong-Ou-Mandel interference (HOMI) between signal and idler photons from a parametric downconversion (PDC) process inside a multi-mode KTP waveguide. As explanation we introduce bi-photonic states entangled in their broadband frequency modes generated by waveguide mode triples and propose a suitable entanglement detection scheme.

Andreas Eckstein; Christine Silberhorn

2008-07-04T23:59:59.000Z

186

Clean coal reference plants: Atmospheric CFB. Topical report, Task 1  

SciTech Connect (OSTI)

The Clean Coal Technology Demonstration Program is a government and industry cofunded technology development effort to demonstrate a new generation of innovative coal utilization processes in a series of full-scale facilities. The goal of the program is to provide the US energy marketplace with a number of advanced, more efficient and environmentally responsive coal-using technologies. The Morgantown Energy Technology Center (METC) has the responsibility for monitoring the CCT Projects within certain technology categories, which correspond to the center`s areas of technology development, including atmospheric fluidized bed combustion, pressurized fluidized bed combustion, integrated gasification combined cycle, mild gasification, and industrial applications. A measure of success in the CCT program will be the commercial acceptance of the new technologies being demonstrated. The dissemination of project information to potential users is being accomplished by producing a series of reference plant designs which will provide the users a basis for the selection of technologies applicable to their future energy requirements. As a part of DOE`s monitoring and evaluation of the CCT Projects, Gilbert/Commonwealth (G/C) has been contracted to assist in this effort by producing the design of a commercial size Reference Plant, utilizing technologies developed in the CCT Program. This report, the first in a series, describes the design of a 400 MW electric power plant, utilizing an atmospheric pressure, circulating fluidized bed combustor (ACFB) similar to the one which was demonstrated at Colorado-Ute`s Nucla station, funded in Round 1 of the CCT Program. The intent of the reference plant design effort was to portray a commercial power plant with attributes considered important to the utility industry. The logical choice for the ACFB combustor was Pyropower since they supplied the ACFB for the Nucla Project.

Rubow, L.N.; Harvey, L.E.; Buchanan, T.L.; Carpenter, R.G.; Hyre, M.R.; Zaharchuk, R.

1992-06-01T23:59:59.000Z

187

CHP Integrated with Burners for Packaged Boilers  

SciTech Connect (OSTI)

The objective of this project was to engineer, design, fabricate, and field demonstrate a Boiler Burner Energy System Technology (BBEST) that integrates a low-cost, clean burning, gas-fired simple-cycle (unrecuperated) 100 kWe (net) microturbine (SCMT) with a new ultra low-NOx gas-fired burner (ULNB) into one compact Combined Heat and Power (CHP) product that can be retrofit on new and existing industrial and commercial boilers in place of conventional burners. The Scope of Work for this project was segmented into two principal phases: (Phase I) Hardware development, assembly and pre-test and (Phase II) Field installation and demonstration testing. Phase I was divided into five technical tasks (Task 2 to 6). These tasks covered the engineering, design, fabrication, testing and optimization of each key component of the CHP system principally, ULNB, SCMT, assembly BBEST CHP package, and integrated controls. Phase I work culminated with the laboratory testing of the completed BBEST assembly prior to shipment for field installation and demonstration. Phase II consisted of two remaining technical tasks (Task 7 and 8), which focused on the installation, startup, and field verification tests at a pre-selected industrial plant to document performance and attainment of all project objectives. Technical direction and administration was under the management of CMCE, Inc. Altex Technologies Corporation lead the design, assembly and testing of the system. Field demonstration was supported by Leva Energy, the commercialization firm founded by executives at CMCE and Altex. Leva Energy has applied for patent protection on the BBEST process under the trade name of Power Burner and holds the license for the burner currently used in the product. The commercial term Power Burner is used throughout this report to refer to the BBEST technology proposed for this project. The project was co-funded by the California Energy Commission and the Southern California Gas Company (SCG), a division of Sempra Energy. These match funds were provided via concurrent contracts and investments available via CMCE, Altex, and Leva Energy The project attained all its objectives and is considered a success. CMCE secured the support of GI&E from Italy to supply 100 kW Turbec T-100 microturbines for the project. One was purchased by the project’s subcontractor, Altex, and a second spare was purchased by CMCE under this project. The microturbines were then modified to convert from their original recuperated design to a simple cycle configuration. Replacement low-NOx silo combustors were designed and bench tested in order to achieve compliance with the California Air Resources Board (CARB) 2007 emission limits for NOx and CO when in CHP operation. The converted microturbine was then mated with a low NOx burner provided by Altex via an integration section that allowed flow control and heat recovery to minimize combustion blower requirements; manage burner turndown; and recover waste heat. A new fully integrated control system was designed and developed that allowed one-touch system operation in all three available modes of operation: (1) CHP with both microturbine and burner firing for boiler heat input greater than 2 MMBtu/hr; (2) burner head only (BHO) when the microturbine is under service; and (3) microturbine only when boiler heat input requirements fall below 2 MMBtu/hr. This capability resulted in a burner turndown performance of nearly 10/1, a key advantage for this technology over conventional low NOx burners. Key components were then assembled into a cabinet with additional support systems for generator cooling and fuel supply. System checkout and performance tests were performed in the laboratory. The assembled system and its support equipment were then shipped and installed at a host facility where final performance tests were conducted following efforts to secure fabrication, air, and operating permits. The installed power burner is now in commercial operation and has achieved all the performance goals.

Castaldini, Carlo; Darby, Eric

2013-09-30T23:59:59.000Z

188

NONLINEAR DEVELOPMENT OF THE R-MODE INSTABILITY AND THE MAXIMUM ROTATION RATE OF NEUTRON STARS  

SciTech Connect (OSTI)

We describe how the nonlinear development of the R-mode instability of neutron stars influences spin up to millisecond periods via accretion. When nearly resonant interactions of the l = m = 2 R-mode with pairs of 'daughter modes' are included, the R-mode saturates at the lowest amplitude which leads to significant excitation of a pair of modes. The lower bound for this threshold amplitude is proportional to the damping rate of the particular daughter modes that are excited parametrically. We show that if dissipation occurs in a very thin boundary layer at the crust-core boundary, the R-mode saturation amplitude is too large for angular momentum gain from accretion to overcome loss to gravitational radiation. We find that lower dissipation is required to explain spin up to frequencies much higher than 300 Hz. We conjecture that if the transition from the fluid core to the crystalline crust occurs over a distance much longer than 1 cm, then a sharp viscous boundary layer fails to form. In this case, damping is due to shear viscosity dissipation integrated over the entire star. We estimate the lowest parametric instability threshold from first principles. The resulting saturation amplitude is low enough to permit spin up to higher frequencies. The requirement to allow continued spin up imposes an upper bound to the frequencies attained via accretion that plausibly may be about 750 Hz. Within this framework, the R-mode is unstable for all millisecond pulsars, whether accreting or not.

Bondarescu, Ruxandra [Institute for Theoretical Physics, University of Zurich, CH-8057 Zurich (Switzerland); Wasserman, Ira, E-mail: ruxandra@physik.uzh.ch, E-mail: ira@astro.cornell.edu [Center for Radiophysics and Space Research, Cornell University, Ithaca, NY 14853 (United States)

2013-11-20T23:59:59.000Z

189

Kyoto University Libraries Reference Guide 1. Compare the reference style of books and journals  

E-Print Network [OSTI]

to use KULINE". There are references and quotations of academic books and articles. These are the documents the author refers to and quotes when writing academic books and articles. Some authors append title seeking, needs, and behavior. San Diego, Academic Press, 2002, p. 114-131. Place of Publication

Takada, Shoji

190

Excitation of Kaluza-Klein gravitational mode  

E-Print Network [OSTI]

We investigate excitation of Kaluza-Klein modes due to the parametric resonance caused by oscillation of radius of compactification. We consider a gravitational perturbation around a D-dimensional spacetime, which we compactify on a (D-4)-sphere to obtain a 4-dimensional theory. The perturbation includes the so-called Kaluza-Klein modes, which are massive in 4-dimension, as well as zero modes, which is massless in 4-dimension. These modes appear as scalar, vector and second-rank symmetric tensor fields in the 4-dimensional theory. Since Kaluza-Klein modes are troublesome in cosmology, quanta of these Kaluza-Klein modes should not be excited abundantly. However, if radius of compactification oscillates, then masses of Kaluza-Klein modes also oscillate and, thus, parametric resonance of Kaluza-Klein modes may occur to excite their quanta. In this paper we consider part of Kaluza-Klein modes which correspond to massive scalar fields in 4-dimension and investigate whether quanta of these modes are excited or not in the so called narrow resonance regime of the parametric resonance. We conclude that at least in the narrow resonance regime quanta of these modes are not excited so catastrophically.

Kunihito Uzawa; Yoshiyuki Morisawa; Shinji Mukohyama

2000-04-10T23:59:59.000Z

191

MATLAB Reference Sheet If you want to...  

E-Print Network [OSTI]

MATLAB Reference Sheet Variables If you want to... MATLAB Command Comment Create a variable called a and set it equal to 1 a = 1 Anytime you use a from now on, unless you change its value or clear it, MATLAB knows you mean 1. Note that MATLAB is case sensitive, so the variables a and A are not the same. Find

Crawford, T. Daniel

192

MATLAB Quick Reference Author: Jialong He  

E-Print Network [OSTI]

MATLAB Quick Reference Author: Jialong He Jialong_he@bigfoot.com http://www.bigfoot.com/~jialong_he General Purpose Commands Managing Commands and Functions addpath Add directories to MATLAB's search path platforms genpath Generate a path string help Display M-file help for MATLAB functions in the Command Window

Mitchell, Tom

193

Run-Time Library Routines Reference  

E-Print Network [OSTI]

MDS Run-Time Library Routines Reference Manual February 1993 Software Version: MDS 5.2 VAX.S.A. The following are trademarks of Digitial Equipment Corporation: CDD DECnet VAX DATATRIEVE DECUS VAXcluster DEC MicroVAX VAX Information Architecture DEC/CMS MicroVMS VMS DEC/MMS Rdb/VMS VT IDL (Interactive Data

California at San Diego, University of

194

To A Continent A Reference Guide  

E-Print Network [OSTI]

Headwaters To A Continent A Reference Guide to Montana's Water Produced by Susan Higgins-Headwaters To A Continent A Place in the Hydrologic Cycle The Historical Significance of Water in Montana Water Availability In A Nutshell Surface Water Ground Water Ways That We Use Water Irrigation and Livestock Public and Rural

Dyer, Bill

195

Retrofit Energy Savings Estimation Model Reference Manual  

E-Print Network [OSTI]

Retrofit Energy Savings Estimation Model Reference Manual #12;#12;Retrofit Energy Savings commercial product, process, or service by trade name, trademark, manufacturer, or otherwise, does from the Department of Energy. Any conclusions or opinions expressed in this manual represent solely

196

REFERENCE GUIDE ENERGY CONSERVATION ASSISTANCE ACT (ECAA)  

E-Print Network [OSTI]

with this requirement. Waste management guidance and plan template can be downloaded at http://www.energy that generate waste. Attachments: Energy Commission Waste Management Plan Guidance Waste Management Plan1 REFERENCE GUIDE ENERGY CONSERVATION ASSISTANCE ACT (ECAA) STATE ENERGY PROGRAM (SEP) AMERICAN

197

User Manual Milli-Q Reference System  

E-Print Network [OSTI]

is intended for use with a Milli-Q® Reference Water Purification System. This User Manual is a guide for use before attempting installation, normal operation or maintenance of the Water Purification System. If this User Manual is not the correct one for your Water Purification System, then please contact Millipore

Woodall, Jerry M.

198

Positional reference system for ultraprecision machining  

DOE Patents [OSTI]

A stable positional reference system for use in improving the cutting tool-to-part contour position in numerical controlled-multiaxis metal turning machines is provided. The reference system employs a plurality of interferometers referenced to orthogonally disposed metering bars which are substantially isolated from machine strain induced position errors for monitoring the part and tool positions relative to the metering bars. A microprocessor-based control system is employed in conjunction with the plurality of positions interferometers and part contour description data input to calculate error components for each axis of movement and output them to corresponding axis driven with appropriate scaling and error compensation. Real-time position control, operating in combination with the reference system, makes possible the positioning of the cutting points of a tool along a part locus with a substantially greater degree of accuracy than has been attained previously in the art by referencing and then monitoring only the tool motion relative to a reference position located on the machine base.

Arnold, J.B.; Burleson, R.R.; Pardue, R.M.

1980-09-12T23:59:59.000Z

199

Reference number ISO 8601:2004(E)  

E-Print Network [OSTI]

Reference number ISO 8601:2004(E) © ISO 2004 INTERNATIONAL STANDARD ISO 8601 Third edition 2004'heure #12;ISO 8601:2004(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems

Wu, Shiliang

200

Xyce parallel electronic simulator : reference guide.  

SciTech Connect (OSTI)

This document is a reference guide to the Xyce Parallel Electronic Simulator, and is a companion document to the Xyce Users Guide. The focus of this document is (to the extent possible) exhaustively list device parameters, solver options, parser options, and other usage details of Xyce. This document is not intended to be a tutorial. Users who are new to circuit simulation are better served by the Xyce Users Guide. The Xyce Parallel Electronic Simulator has been written to support, in a rigorous manner, the simulation needs of the Sandia National Laboratories electrical designers. It is targeted specifically to run on large-scale parallel computing platforms but also runs well on a variety of architectures including single processor workstations. It also aims to support a variety of devices and models specific to Sandia needs. This document is intended to complement the Xyce Users Guide. It contains comprehensive, detailed information about a number of topics pertinent to the usage of Xyce. Included in this document is a netlist reference for the input-file commands and elements supported within Xyce; a command line reference, which describes the available command line arguments for Xyce; and quick-references for users of other circuit codes, such as Orcad's PSpice and Sandia's ChileSPICE.

Mei, Ting; Rankin, Eric Lamont; Thornquist, Heidi K.; Santarelli, Keith R.; Fixel, Deborah A.; Coffey, Todd Stirling; Russo, Thomas V.; Schiek, Richard Louis; Warrender, Christina E.; Keiter, Eric Richard; Pawlowski, Roger Patrick

2011-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "integration mode reference" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Reference Modeling for Inter-organizational Systems  

E-Print Network [OSTI]

to gain efficiency in the modeling process and a higher quality of inter-organizational solutions. 1Reference Modeling for Inter-organizational Systems Dieter Mayrhofer Institute of Software@big.tuwien.ac.at Abstract. Inter-organizational business process models are created and used by different partner networks

202

Reference: RGL 82-02 Subject: WETLANDS  

E-Print Network [OSTI]

Reference: RGL 82-02 Subject: WETLANDS Title: CLARIFICATION OF "NORMAL CIRCUMSTANCES" IN THE WETLAND DEFINITION Issued: 02/11/82 Expires: 12/31/84 Originator: DAEN-CWO-N Description: DEFINES NORMAL CIRCUMSTANCES, CONVERTED WETLANDS, AND ABNORMAL PRESENCE OF AQUATIC VEGETATION 1. This letter will serve

US Army Corps of Engineers

203

Documents and Briefcase Zimbra Quick Reference Card  

E-Print Network [OSTI]

Documents and Briefcase Zimbra Quick Reference Card Documents ­ Workspace (http://z.rochester.edu) Documents Shortcuts Edit Refresh Show Shortcuts + Cancel Save + Go the `Shortcuts' tab on the left. Basic Briefcase Tasks What is Briefcase? It is a tool for managing files from

Portman, Douglas

204

Risk Management Steering Committee Terms of Reference  

E-Print Network [OSTI]

Risk Management Steering Committee Terms of Reference October 2009 1.0 Purpose The purposes of the Steering Committee are: a) to follow a continuous process to understand and communicate risk from an university-wide perspective: b) to provide a university-wide opportunity to discuss risk issues, including

Victoria, University of

205

High-sensitivity, and cost-effective system for infrared imaging of concealed objects in dynamic mode.  

SciTech Connect (OSTI)

Novel, cost-efficient, and highly-sensitive IR imaging systems play an important role in homeland security functions. Technical limitations in the areas of sensitivity, contrast ratio, bandwidth and cost continue to constrain imaging capabilities. We have designed and prototyped a compact computer-piloted high sensitivity infrared imaging system. The device consists of infrared optics, cryostat, low-noise pre-amplifier, Analog-to-Digital hardware, feedback electronics, and unique image processing software. Important advantages of the developed system are: (i) Eight electronic channels are available for simultaneous registration of IR and visible images in multiple spectral ranges, (ii) Capability of real-time analysis such as comparing the 'sensed' image with 'reference' images from a database, (iii) High accuracy temperature measurement of multiple points on the image by referencing the radiation intensity from the object to a black body model, (iv) Image generation by real-time integration of images from multiple sensors operating from the visible to the terahertz range. The device was tested with a liquid-nitrogen-cooled, single-pixel HgCdTe detector for imaging in 8-12 microns range. The demonstrated examples of infrared imaging of concealed objects in static and dynamic modes include a hammer (metal head and wooden handle), plastic imitator of handguns hidden under clothes, powder in an envelope, and revealing complex wall structures under decorative plaster.

Gordiyenko, E.; Yefremenko, V.; Pearson, J.; Bader, S.; Novosad, V.; Materials Science Division

2005-08-05T23:59:59.000Z

206

The Hydrogen Laboratory and The Brazilian Reference Center for...  

Energy Savers [EERE]

The Hydrogen Laboratory and The Brazilian Reference Center for Hydrogen Energy The Hydrogen Laboratory and The Brazilian Reference Center for Hydrogen Energy Presentation given by...

207

2014 Annual Merit Review Results Report - Cross-reference of...  

Energy Savers [EERE]

Cross-reference of Project Investigators, Projects, and Organizations 2014 Annual Merit Review Results Report - Cross-reference of Project Investigators, Projects, and...

208

Development of Compact Gaseous Sensors with Internal Reference...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Compact Gaseous Sensors with Internal Reference for Monitoring O2 and NOx in Combustion Environments Development of Compact Gaseous Sensors with Internal Reference for Monitoring...

209

A Method for Calculating Reference Evapotranspiration on Daily Time Scales  

E-Print Network [OSTI]

Measures of reference evapotranspiration are essential for applications of agricultural management and water resources engineering. Using numerous esoteric variables, one can calculate daily reference evapotranspiration ...

Farmer, William

210

2008 Annual Merit Review Results Summary - 18. Cross-Reference...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

2008 Annual Merit Review Results Summary - 18. Cross-Reference of Project Investigators, Projects, and Organizations 2008 Annual Merit Review Results Summary - 18. Cross-Reference...

211

Mode locking and chaos in sliding charge-density-wave systems  

SciTech Connect (OSTI)

Sliding CDWs in ac electric fields may serve as model systems for the study of mode-locking phenomena and the transition to chaos in dissipative dynamical system with competing frequencies. The mode-locking structure at the transition is expected to form a complete devil's staircase with fractal dimension D approx. 0.87. Indeed, Brown, Mozurkewich and Gruener have observed a multitude of steps in the I-V characteristics of NbSe/sub 3/ with an apparent fractal dimension D = 0.91 +- 0.03. 16 references.

Bak, P.

1984-01-01T23:59:59.000Z

212

Development of the iPOINT Testbed for Optoelectronic Asynchronous Transfer Mode Networking  

E-Print Network [OSTI]

Development of the iPOINT Testbed for Optoelectronic Asynchronous Transfer Mode Networking Abstract. In conjunction of the UIUC microelectronics laboratory, low-cost optoelectronic components have been developed the integration of time-division multiplexors, ATM switches, optoelectronic components, and ber-optics. As shown

Lockwood, John W.

213

Physics of vertically integrated waveguide photodetectors and amplifiers. Final report  

SciTech Connect (OSTI)

This report describes the efforts supported by LLNL under the Subcontract No. B239593 at the University of Arizona during the Fiscal Year 1992. A solid physical foundation has been developed for understanding the operation of vertically integrated photodetectors and amplifiers. This has been achieved through a combination of numerical simulation and development of simple coupled-mode theories. Coupled-mode theory has been used to elucidate the physics underlying the operation of vertically integrated photodetectors. In particular, the relation between the spatial transients observed in experiments and numerical simulations, and the non-power orthogonality of the underlying modes has been clarified. The coupled-mode theory has been extended to the case of coupled waveguide-amplifiers.

Wright, E.M. [Univ. of Arizona, Tucson, AZ (United States). Optical Sciences Center

1993-11-01T23:59:59.000Z

214

Planar Integrated Optics and astronomical interferometry  

E-Print Network [OSTI]

Integrated optics (IO) is an optical technology that allows to reproduce optical circuits on a planar substrate. Since 1996, we have investigated the potentiality of IO in the framework of astronomical single mode interferometry. We review in this paper the principles of IO, the requirements for interferometry and the corresponding solutions offered by IO, the results of component characterization and the possible fields of application.

Pierre Kern; Jean-Philippe Berger; Pierre Haguenauer; Fabien Malbet; Karine Perraut

2005-08-01T23:59:59.000Z

215

A Pulsational Model for the Orthogonal Polarization Modes in Radio Pulsars  

E-Print Network [OSTI]

In an earlier paper, we introduced a model for pulsars in which non-radial oscillations of high spherical degree (\\el) aligned to the magnetic axis of a spinning neutron star were able to reproduce subpulses like those observed in single-pulse measurements of pulsar intensity. The model did not address polarization, which is an integral part of pulsar emission. Observations show that many pulsars emit radio waves that appear to be the superposition of two linearly polarized emission modes with orthogonal polarization angles. In this paper, we extend our model to incorporate linear polarization. As before, we propose that pulsational displacements of stellar material modulate the pulsar emission, but now we apply this modulation to a linearly-polarized mode of emission, as might be produced by curvature radiation. We further introduce a second polarization mode, orthogonal to the first, that is modulated by pulsational velocities. We combine these modes in superposition to model the observed Stokes parameters in radio pulsars.

J. Christopher Clemens; R. Rosen

2008-02-17T23:59:59.000Z

216

Prufer Transformations for the Normal Modes in Ocean Acoustics  

SciTech Connect (OSTI)

In 1926 Prufer introduced a method of transforming the second order Sturm-Liouville (SL) equation into two nonlinear first order differential equations for the phase oe and ''magnitude'', |oe{sup 2}+oe{sup 2}| for a Poincare phase space representation, (oe,oe). The useful property is the phase equation decouples from the magnitude one which leads to a nonlinear, two point boundary value problem for the eigenvalues, or SL numbers. The transformation has been used both theoretically, e.g. Atkinson, [1960] to prove certain properties of SL equations as well as numerically e.g Bailey [1978]. This paper examines the utility of the Prufer transformation in the context of numerical solutions for modes of the ocean acoustic wave equation. (Its use is certainly not well known in the ocean acoustics community.) Equations for the phase, oe, and natural logarithm of the ''magnitude'', ln(|oe{sup 2}+oe{sup 2}|) lead to same decoupling and a fast and efficient numerical solution with the SL eigenvalues mapping to the horizontal wavenubers. The Prufer transformation has stabilty problems for low order modes at high frequecies, so a numerically stable method of integrating the phase equation is derived. This seems to be the first time the these stability issues have been highlighted to provide a robust algorthim for the modes.

Baggeroer, Arthur B. [Massachusetts Institute of Technology, Cambridge, MA 02139 (United States)

2010-09-06T23:59:59.000Z

217

Reference Inside KS1992 Tray Inside Air  

E-Print Network [OSTI]

Reference Inside KS1992 0.2 Tray Inside Air 0.5 Tray Inside Air 0.8 Tray Inside Air 0.2 Tray Side Wall Inner 0.2 Tray Side Wall Inner Under TAMP near sensor pos4 Under TAMP near sensor pos4 Air Gap Below TDIG pos1 Air Gap Below TDIG pos4 Air Gap Below TDIG pos6 HPTDC1 Chip pos6 HPTDC4 Chip pos6 HPTDC2

Llope, William J.

218

Full Abstraction for Nominal General References  

E-Print Network [OSTI]

}. For each m (MA \\ IA): iA A m1 A · · · A mi A m Initial moves are P-Answers,and whenever m1 A m2, m1, m2 The -calculus is a functional calculus with nominal references. TY A, B ::= ½ | � | [A] | A B | A B TE M, N ::= x | x.M | M N -term | skip return | n | pred M | succ N arithmetic | if0 M then N1 else N2

219

Property:References | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating Solar PowerstoriesNrelPartnerType Jump to: navigation,References Jump to: navigation,

220

NPS Quick Reference Guide | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy Resources Jump to:46 -Energieprojekte3Information Exploration/DevelopmentLegal Document-Reference

Note: This page contains sample records for the topic "integration mode reference" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Administrator References and Logins | Advanced Photon Source  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc Documentation RUCProductstwrmrAre theAdministrator References and Logins User-related

222

Characterizing multipartite entanglement without shared reference frames  

E-Print Network [OSTI]

Multipartite entanglement constitutes one of the key resources in quantum information processing. We exploit correlation tensor norms to develop a framework for its experimental detection without the need for shared frames of reference. By bounding these norms for partially separable states and states of limited dimension we achieve an extensive characterization of entanglement in multipartite systems in an experimentally feasible way. Furthermore we show that both bi- and multipartite dimensionality of entanglement can be revealed by our methods.

Claude Klöckl; Marcus Huber

2014-11-19T23:59:59.000Z

223

Generalized Riemann integral R[superscript g  

E-Print Network [OSTI]

(x) & f(x) & y (x), so that f(x) = y(x) = g(x) almost everywhere (f(y - y) = 0). Thus f is measurable and R IE f(x)dx = LfE f(x)dx. Theorem 5. If f: E ~ R* is Lebesgue integrable then f is R integrable. Proof. First note that E is measurable... is continuous almost everywhere it is not R-integrable, but f is easily seen to be R -integrable with R / f(x)dx = 1/3. C E-C REFERENCES 1. J. Rey Pastor, P. Pi Calleja and C. A. Trejo, AnGlisis Matemati co, tres vol umenes, I di tori al Kapelusi z, Buenos...

Perez, Kreemly Miguel

2012-06-07T23:59:59.000Z

224

APPENDIX Q RULE IMPACT STATEMENT Subchapter 2. Incorporation By Reference 252:100-2-3. Incorporation by reference [AMENDED] APPENDIX Q. INCORPORATION BY REFERENCE [REVOKED  

E-Print Network [OSTI]

Reference, and Appendix Q, to update the federal regulations incorporated by reference. As required by the Administrative Rules on Rulemaking, the existing Appendix Q will be revoked and a new Appendix Q will be adopted. These proposals are part of the annual review of Title 40, Code of Federal Regulations (40 CFR) incorporations by reference. 2. CLASSES OF PERSONS AFFECTED: The classes of persons affected are the owners and operators of facilities that are subject to the regulations incorporated by reference.

unknown authors

225

Abstract--In the design of a spaceborne Synthetic Aperture RADAR mission with multiple modes and swaths, like the  

E-Print Network [OSTI]

the modes. Index Terms-- Synthetic Aperture Radar, STRIPMAP, TOPSAR. Conference topic: SAR/ISAR I Sophia-Antipolis cedex, France. mail: lorenzo.maggi@eurecom.fr calibration and the processing. In order of a spaceborne SAR. Let us refer to the geometry of Fig. 1.a, where we assumed for simplicity flat earth

Gesbert, David

226

Thermal Control & System Integration  

Broader source: Energy.gov [DOE]

The thermal control and system integration activity focuses on issues such as the integration of motor and power control technologies and the development of advanced thermal control technologies....

227

Distribution Grid Integration  

Broader source: Energy.gov [DOE]

The DOE Systems Integration team funds distribution grid integration research and development (R&D) activities to address the technical issues that surround distribution grid planning,...

228

Evaluation of on-chip integration of magneto-optic isolators  

E-Print Network [OSTI]

The recent development of on chip integration of magneto-optic isolators is reviewed. Two major categories of structural designs for waveguide isolator (nonreciprocal mode conversion and nonreciprocal phase shift) have ...

Chen, Xiaoyan, M. Eng. Massachusetts Institute of Technology

2007-01-01T23:59:59.000Z

229

275 C Downhole Switched-Mode Power Supply  

SciTech Connect (OSTI)

A vee-square (V2) control based controller IC is developed for a switch mode power supply capable of operating at extreme temperature/harsh environment conditions. A buck type regulator with silicon carbide power junction field effect transistors (JFET) as power devices is used to analyze the performance of controller. Special emphases are made on the analog sub-blocks--voltage reference, operational transconductance amplifier and comparator as individual building blocks. Transformer coupled gate drives and high temperature operable magnetic cores and capacitors are identified and tested for use in the design. Conventional ceramic chip packaging of ICs combined with lead carrier type mounting of passive filter components is introduced for hybrid packaging of the complete product. The developed SMPS is anticipated to support the operation of down-hole microcontrollers and other electronics devices that require low/medium power filtered dc inputs over an operating temperature of 275 C.

Chris Hutchens; Vijay Madhuravasal

2008-08-31T23:59:59.000Z

230

Modcomp MAX IV System Processors reference guide  

SciTech Connect (OSTI)

A user almost always faces a big problem when having to learn to use a new computer system. The information necessary to use the system is often scattered throughout many different manuals. The user also faces the problem of extracting the information really needed from each manual. Very few computer vendors supply a single Users Guide or even a manual to help the new user locate the necessary manuals. Modcomp is no exception to this, Modcomp MAX IV requires that the user be familiar with the system file usage which adds to the problem. At General Atomics there is an ever increasing need for new users to learn how to use the Modcomp computers. This paper was written to provide a condensed Users Reference Guide'' for Modcomp computer users. This manual should be of value not only to new users but any users that are not Modcomp computer systems experts. This Users Reference Guide'' is intended to provided the basic information for the use of the various Modcomp System Processors necessary to, create, compile, link-edit, and catalog a program. Only the information necessary to provide the user with a basic understanding of the Systems Processors is included. This document provides enough information for the majority of programmers to use the Modcomp computers without having to refer to any other manuals. A lot of emphasis has been placed on the file description and usage for each of the System Processors. This allows the user to understand how Modcomp MAX IV does things rather than just learning the system commands.

Cummings, J.

1990-10-01T23:59:59.000Z

231

Department of Energy Construction Safety Reference Guide  

SciTech Connect (OSTI)

DOE has adopted the Occupational Safety and Health Administration (OSHA) regulations Title 29 Code of Federal Regulations (CFR) 1926 ``Safety and Health Regulations for Construction,`` and related parts of 29 CFR 1910, ``Occupational Safety and Health Standards.`` This nonmandatory reference guide is based on these OSHA regulations and, where appropriate, incorporates additional standards, codes, directives, and work practices that are recognized and accepted by DOE and the construction industry. It covers excavation, scaffolding, electricity, fire, signs/barricades, cranes/hoists/conveyors, hand and power tools, concrete/masonry, stairways/ladders, welding/cutting, motor vehicles/mechanical equipment, demolition, materials, blasting, steel erection, etc.

Not Available

1993-09-01T23:59:59.000Z

232

1993 Solid Waste Reference Forecast Summary  

SciTech Connect (OSTI)

This report, which updates WHC-EP-0567, 1992 Solid Waste Reference Forecast Summary, (WHC 1992) forecasts the volumes of solid wastes to be generated or received at the US Department of Energy Hanford Site during the 30-year period from FY 1993 through FY 2022. The data used in this document were collected from Westinghouse Hanford Company forecasts as well as from surveys of waste generators at other US Department of Energy sites who are now shipping or plan to ship solid wastes to the Hanford Site for disposal. These wastes include low-level and low-level mixed waste, transuranic and transuranic mixed waste, and nonradioactive hazardous waste.

Valero, O.J.; Blackburn, C.L. [Westinghouse Hanford Co., Richland, WA (United States); Kaae, P.S.; Armacost, L.L.; Garrett, S.M.K. [Pacific Northwest Lab., Richland, WA (United States)

1993-08-01T23:59:59.000Z

233

Template:Reference | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating SolarElectric Coop, Inc Place:Innovation & Solutions HomeTeksun PVCiteReference

234

Commercial Reference Buildings | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin:EnergyWisconsin: Energy,(EC-LEDS)Columbus ElectricRefuse To EnergyReference

235

Widget:ReferenceEdit | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300 South Place:ReferenceEdit Jump to: navigation, search This widget is used to

236

Sandia National Laboratories: Reference Model Project (RMP)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -theErik SpoerkeSolar Regional TestClimateResearchRecovery Act (ARRA)3 Reference

237

Category:Solar References | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin: EnergyBostonFacilityCascadeJumpInformation ManufacturingReferences

238

Form:Reference | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision has beenFfe2fb55-352f-473b-a2dd-50ae8b27f0a6Theoretical vsFlintFluxInput your datasetOil andReference

239

Reliability Failure Mode, Effects, and Criticality Analysis  

E-Print Network [OSTI]

Reliability Failure Mode, Effects, and Criticality Analysis Addendum 1; HFE ~ ATM501 PAGE I I. Hiebert Reliability Engineer HFE · B-1 f #12;~~.~-~ -_ ~ ~ Reliability Failure Mode, Effects were slight adjustment in the linearizing resistors. The reliability is effected upward by the deletion

Rathbun, Julie A.

240

Normalizable fermion modes in a holographic superconductor  

E-Print Network [OSTI]

We consider fermions in a zero-temperature superconducting anti-de Sitter domain wall solution and find continuous bands of normal modes. These bands can be either partially filled or totally empty and gapped. We present a semi-classical argument which approximately captures the main features of the normal mode spectrum.

Steven S. Gubser; Fabio D. Rocha; Pedro Talavera

2009-11-18T23:59:59.000Z

Note: This page contains sample records for the topic "integration mode reference" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Broadband frequency mode entanglement in waveguided PDC  

E-Print Network [OSTI]

We report the observation of beatings of the coincidence event rate in a Hong-Ou-Mandel interference (HOMI) between signal and idler photons from a parametric downconversion process inside a multi-mode KTP waveguide. As explanation we introduce bi-photonic states entangled in their broadband frequency modes and propose a suitable entanglement witness.

Eckstein, Andreas

2008-01-01T23:59:59.000Z

242

A summary of chapter 1 (pages 15) of the IMCP Manual (reference information on page 4) Technical Summary  

E-Print Network [OSTI]

and practice. So, FHWA funded development of a one-source reference manual that describes best practices of the IMCP Manual (Taylor, P.C., et al. 2006. Integrated Materials and Construction Practices for Concrete Pavement: A State-of-the-Practice Manual, Ames, Iowa, Iowa State University [FHWA HIF-07-004] [www

243

References 21 GJ79 Michael R. Garey and David S. Johnson. Computers and Intractability, A Guide to the  

E-Print Network [OSTI]

Transactions on Computer-Aided Design of Integrated Circuits and Systems, CAD- 64:618 633,July 1987. DGR+87References 21 GJ79 Michael R. Garey and David S. Johnson. Computers and Intractability, A Guide. Exclusion constraints, a new application of graph algorithms to VLSI design. In4thMIT Conferenceon Advanced

Karplus, Kevin

244

Nonclassicality in two-mode BEC  

E-Print Network [OSTI]

An analytic operator solution of a generalized quantum mechanical Hamiltonian of two-mode Bose Einstein condensates (BECs) is obtained and the same is used to investigate the nonclassical properties of the modes present in the system. Nonclassical characters are observed by means of single mode and intermodal squeezing, single mode and intermodal sub-Poissonian boson statistics and intermodal entanglement. In addition to the traditionally studied lower order nonclassical properties, signatures of higher order nonclassical characters of two-mode BEC systems are also obtained by investigating the possibility of higher order antibunching and higher order entanglement. The mutual relation among the observed nonclassicalities and their evolution (variation) with rescaled time and the ratio of the single boson tunneling amplitude ($\\varepsilon$) and the coupling constant for the intra-modal interaction ($\\kappa$) are also reported.

Sandip Kumar Giri; Biswajit Sen; C H Raymond Ooi; Anirban Pathak

2013-07-05T23:59:59.000Z

245

Reference worldwide model for antineutrinos from reactors  

E-Print Network [OSTI]

Antineutrinos produced at nuclear reactors constitute a severe source of background for the detection of geoneutrinos, which bring to the Earth's surface information about natural radioactivity in the whole planet. In this framework we provide a reference worldwide model for antineutrinos from reactors, in view of reactors operational records yearly published by the International Atomic Energy Agency (IAEA). We evaluate the expected signal from commercial reactors for ongoing (KamLAND and Borexino), planned (SNO+) and proposed (Juno, RENO-50, LENA and Hanohano) experimental sites. Uncertainties related to reactor antineutrino production, propagation and detection processes are estimated using a Monte Carlo based approach, which provides an overall site dependent uncertainty on the signal in the geoneutrino energy window on the order of 3%. We also implement the off-equilibrium correction to the reference reactor spectra associated with the long-lived isotopes and we estimate a 2.4% increase of the unoscillated event rate in the geoneutrino energy window due to the storage of spent nuclear fuels in the cooling pools. We predict that the research reactors contribute to less than 0.2% to the commercial reactor signal in the investigated 14 sites. We perform a multitemporal analysis of the expected reactor signal over a time lapse of 10 years using reactor operational records collected in a comprehensive database published at www.fe.infn.it/antineutrino.

Marica Baldoncini; Ivan Callegari; Giovanni Fiorentini; Fabio Mantovani; Barbara Ricci; Virginia Strati; Gerti Xhixha

2015-02-16T23:59:59.000Z

246

Generic Argillite/Shale Disposal Reference Case  

SciTech Connect (OSTI)

Radioactive waste disposal in a deep subsurface repository hosted in clay/shale/argillite is a subject of widespread interest given the desirable isolation properties, geochemically reduced conditions, and widespread geologic occurrence of this rock type (Hansen 2010; Bianchi et al. 2013). Bianchi et al. (2013) provides a description of diffusion in a clay-hosted repository based on single-phase flow and full saturation using parametric data from documented studies in Europe (e.g., ANDRA 2005). The predominance of diffusive transport and sorption phenomena in this clay media are key attributes to impede radionuclide mobility making clay rock formations target sites for disposal of high-level radioactive waste. The reports by Hansen et al. (2010) and those from numerous studies in clay-hosted underground research laboratories (URLs) in Belgium, France and Switzerland outline the extensive scientific knowledge obtained to assess long-term clay/shale/argillite repository isolation performance of nuclear waste. In the past several years under the UFDC, various kinds of models have been developed for argillite repository to demonstrate the model capability, understand the spatial and temporal alteration of the repository, and evaluate different scenarios. These models include the coupled Thermal-Hydrological-Mechanical (THM) and Thermal-Hydrological-Mechanical-Chemical (THMC) models (e.g. Liu et al. 2013; Rutqvist et al. 2014a, Zheng et al. 2014a) that focus on THMC processes in the Engineered Barrier System (EBS) bentonite and argillite host hock, the large scale hydrogeologic model (Bianchi et al. 2014) that investigates the hydraulic connection between an emplacement drift and surrounding hydrogeological units, and Disposal Systems Evaluation Framework (DSEF) models (Greenberg et al. 2013) that evaluate thermal evolution in the host rock approximated as a thermal conduction process to facilitate the analysis of design options. However, the assumptions and the properties (parameters) used in these models are different, which not only make inter-model comparisons difficult, but also compromise the applicability of the lessons learned from one model to another model. The establishment of a reference case would therefore be helpful to set up a baseline for model development. A generic salt repository reference case was developed in Freeze et al. (2013) and the generic argillite repository reference case is presented in this report. The definition of a reference case requires the characterization of the waste inventory, waste form, waste package, repository layout, EBS backfill, host rock, and biosphere. This report mainly documents the processes in EBS bentonite and host rock that are potentially important for performance assessment and properties that are needed to describe these processes, with brief description other components such as waste inventory, waste form, waste package, repository layout, aquifer, and biosphere. A thorough description of the generic argillite repository reference case will be given in Jové Colon et al. (2014).

Zheng, Liange; Jov& #233; Colon, Carlos; Bianchi, Marco; Birkholzer, Jens

2014-08-08T23:59:59.000Z

247

Integrated fiber-mirror ion trap for strong ion-cavity coupling  

SciTech Connect (OSTI)

We present and characterize fiber mirrors and a miniaturized ion-trap design developed to integrate a fiber-based Fabry-Perot cavity (FFPC) with a linear Paul trap for use in cavity-QED experiments with trapped ions. Our fiber-mirror fabrication process not only enables the construction of FFPCs with small mode volumes, but also allows us to minimize the influence of the dielectric fiber mirrors on the trapped-ion pseudopotential. We discuss the effect of clipping losses for long FFPCs and the effect of angular and lateral displacements on the coupling efficiencies between cavity and fiber. Optical profilometry allows us to determine the radii of curvature and ellipticities of the fiber mirrors. From finesse measurements, we infer a single-atom cooperativity of up to 12 for FFPCs longer than 200??m in length; comparison to cavities constructed with reference substrate mirrors produced in the same coating run indicates that our FFPCs have similar scattering losses. We characterize the birefringence of our fiber mirrors, finding that careful fiber-mirror selection enables us to construct FFPCs with degenerate polarization modes. As FFPCs are novel devices, we describe procedures developed for handling, aligning, and cleaning them. We discuss experiments to anneal fiber mirrors and explore the influence of the atmosphere under which annealing occurs on coating losses, finding that annealing under vacuum increases the losses for our reference substrate mirrors. X-ray photoelectron spectroscopy measurements indicate that these losses may be attributable to oxygen depletion in the mirror coating. Special design considerations enable us to introduce a FFPC into a trapped ion setup. Our unique linear Paul trap design provides clearance for such a cavity and is miniaturized to shield trapped ions from the dielectric fiber mirrors. We numerically calculate the trap potential in the absence of fibers. In the experiment additional electrodes can be used to compensate distortions of the potential due to the fibers. Home-built fiber feedthroughs connect the FFPC to external optics, and an integrated nanopositioning system affords the possibility of retracting or realigning the cavity without breaking vacuum.

Brandstätter, B., E-mail: birgit.brandstaetter@uibk.ac.at; Schüppert, K.; Casabone, B.; Friebe, K.; Stute, A.; Northup, T. E. [Institut für Experimentalphysik, Universität Innsbruck, 6020 Innsbruck (Austria)] [Institut für Experimentalphysik, Universität Innsbruck, 6020 Innsbruck (Austria); McClung, A. [Institut für Experimentalphysik, Universität Innsbruck, 6020 Innsbruck (Austria) [Institut für Experimentalphysik, Universität Innsbruck, 6020 Innsbruck (Austria); Norman Bridge Laboratory of Physics 12-33, California Institute of Technology, Pasadena, California 91125 (United States); Schmidt, P. O. [QUEST Institute for Experimental Quantum Metrology, Physikalisch-Technische Bundesanstalt, 38116 Braunschweig (Germany) [QUEST Institute for Experimental Quantum Metrology, Physikalisch-Technische Bundesanstalt, 38116 Braunschweig (Germany); Institut für Quantenoptik, Leibniz Universität Hannover, 30167 Hannover (Germany); Deutsch, C. [Laboratoire Kastler Brossel, ENS/UPMC-Paris 6/CNRS, 24 rue Lhomond, F-75005 Paris (France) [Laboratoire Kastler Brossel, ENS/UPMC-Paris 6/CNRS, 24 rue Lhomond, F-75005 Paris (France); Menlo Systems GmbH, Am Klopferspitz 19a, 82152 Martinsried (Germany); Reichel, J. [Laboratoire Kastler Brossel, ENS/UPMC-Paris 6/CNRS, 24 rue Lhomond, F-75005 Paris (France)] [Laboratoire Kastler Brossel, ENS/UPMC-Paris 6/CNRS, 24 rue Lhomond, F-75005 Paris (France); Blatt, R. [Institut für Experimentalphysik, Universität Innsbruck, 6020 Innsbruck (Austria) [Institut für Experimentalphysik, Universität Innsbruck, 6020 Innsbruck (Austria); Institut für Quantenoptik und Quanteninformation, Österreichische Akademie der Wissenschaften, Otto-Hittmair-Platz 1, A-6020 Innsbruck (Austria)

2013-12-15T23:59:59.000Z

248

Wind Integration Study Methods (Presentation)  

SciTech Connect (OSTI)

This presentation provides an overview of common elements, differences, integration costs, and errors in integration analysis.

Milligan, M.; Kirby, B.

2011-04-01T23:59:59.000Z

249

Edge modes in band topological insulators  

E-Print Network [OSTI]

We characterize gapless edge modes in translation invariant topological insulators. We show that the edge mode spectrum is a continuous deformation of the spectrum of a certain gluing function defining the occupied state bundle over the Brillouin zone (BZ). Topologically non-trivial gluing functions, corresponding to non-trivial bundles, then yield edge modes exhibiting spectral flow. We illustrate our results for the case of chiral edge states in two dimensional Chern insulators, as well as helical edges in quantum spin Hall states.

Lukasz Fidkowski; T. S. Jackson; Israel Klich

2011-05-09T23:59:59.000Z

250

Mixed Mode Fuel Injector And Injection System  

DOE Patents [OSTI]

A fuel injector includes a homogenous charge nozzle outlet set and a conventional nozzle outlet set that are controlled respectively by first and second three way needle control valves. Each fuel injector includes first and second concentric needle valve members. One of the needle valve members moves to an open position for a homogenous charge injection event, while the other needle valve member moves to an open position for a conventional injection event. The fuel injector has the ability to operate in a homogenous charge mode with a homogenous charge spray pattern, a conventional mode with a conventional spray pattern or a mixed mode.

Stewart, Chris Lee (Normal, IL); Tian, Ye (Bloomington, IL); Wang, Lifeng (Normal, IL); Shafer, Scott F. (Morton, IL)

2005-12-27T23:59:59.000Z

251

Source depth for solar p-modes  

E-Print Network [OSTI]

Theoretically calculated power spectra are compares with observed solar p-mode velocity power spectra over a range of mode degree and frequency. The depth for the sources responsible for exciting p-modes of frequency 2.0 mHz is determined from the asymmetry of their power spectra and found to be about 800 km below the photosphere for quadrupole sources and 150 km if sources are dipole. The source depth for high frequency oscillations of frequency greater than about 6 mHz is 180 (50) km for quadrupole (dipole) sources.

Pawan Kumar; Sarbani Basu

2000-06-15T23:59:59.000Z

252

One in five online scholarly articles affected by 'reference...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

on reference rot, the combination of link rot and content drift to which references to web resources included in STM articles are subject. January 26, 2015 From left, Los Alamos...

253

"No two directions are ever the same": Transforming reference services  

E-Print Network [OSTI]

This poster provides information about the changes that have occurred in reference services at the University of Kansas (KU) Libraries since 2002. Our intent is to illustrate the evolution of thinking about reference ...

Stratton, John M.; Devlin, Frances A.

2008-07-29T23:59:59.000Z

254

It's Complicated!: The Continuing Evolution of the Reference Service Model  

E-Print Network [OSTI]

Digital resources and technologies have brought new dimensions to librarianship and traditional reference services. At the University of Kansas (KU) Libraries, reference services have been evolving and reconfigured several ...

Devlin, Frances A.; Ellis, Erin L.

2010-08-06T23:59:59.000Z

255

Kinetic theory of geodesic acoustic and related modes  

E-Print Network [OSTI]

Kinetic theory of geodesic acoustic and related modes A.I. Smolyakov Department of Physics · Geodesic Acoustic Modes (GAM) are relatively high frequency eigen-modes supported by plasma compressibility history of GAM and related modes ·1968 : Geodesic acoustic modes: Winsor, Johnson, Dawson ·2000-05: Surge

256

C Reference Card (ANSI) Program Structure/Functions  

E-Print Network [OSTI]

C Reference Card (ANSI) Program Structure/Functions type fnc(type1,. . . ) function declarations: statement } ANSI Standard Libraries

Glykos, Nikolaos

257

References Applicable to Station-Level Calibration Steve Ellingson  

E-Print Network [OSTI]

, W. Hocking, and F. Fabry, "Precipitation Measurement using VHF Wind-Profiler Radars: A MultifacetedReferences Applicable to Station-Level Calibration Steve Ellingson July 17, 2008 1 Summary This is a list of references possibly applicable to LWA station-level calibration. References [1] R.L. Balsano

Ellingson, Steven W.

258

RECENT REFERENCES: JULY 1, 2006 TO SEPTEMBER 30, 2006  

SciTech Connect (OSTI)

This document lists experimental references added to Nuclear Science References (NSR) during the period July 1, 2006 to September 30, 2006. The first section lists keynumbers and keywords sorted by mass and nuclide. The second section lists all references, ordered by keynumber.

WINCHELL, D.F.

2006-09-30T23:59:59.000Z

259

RECENT REFERENCES: APRIL 1, 2005 TO JUNE 30, 2005  

SciTech Connect (OSTI)

This document lists experimental references added to Nuclear Science References (NSR) during the period April 1, 2005 to June 30, 2005. The first section lists keynumbers and keywords sorted by mass and nuclide. The second section lists all references, ordered by keynumber.

WINCHELL, D.F.

2005-06-30T23:59:59.000Z

260

RECENT REFERENCES: JANUARY 1, 2005 TO DECEMBER 31, 2005  

SciTech Connect (OSTI)

This document lists experimental references added to Nuclear Science References (NSR) during the period January 1, 2005 to December 31, 2005. The first section lists keynumbers and keywords sorted by mass and nuclide. The second section lists all references, ordered by keynumber.

WINCHELL, D.F.

2005-12-31T23:59:59.000Z

Note: This page contains sample records for the topic "integration mode reference" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

RECENT REFERENCES: OCTOBER 1, 2005 TO DECEMBER 31, 2005  

SciTech Connect (OSTI)

This document lists experimental references added to Nuclear Science References (NSR) during the period October 1, 2005 to December 31, 2005. The first section lists keynumbers and keywords sorted by mass and nuclide. The second section lists all references, ordered by keynumber.

WINCHELL, D.F.

2005-12-31T23:59:59.000Z

262

Generating and Interpreting Referring Expressions in Dustin Arthur Smith  

E-Print Network [OSTI]

Generating and Interpreting Referring Expressions in Context by Dustin Arthur Smith B.S., Wake Referring Expressions in Context by Dustin Arthur Smith Submitted to the Program of Media Arts and Sciences, MIT Media Lab #12;Generating and Interpreting Referring Expressions in Context by Dustin Arthur Smith

263

On the Intrinsic Locality Properties of Web Reference Streams  

E-Print Network [OSTI]

On the Intrinsic Locality Properties of Web Reference Streams Rodrigo Fonseca Virg´ilio Almeida in the study of Web reference streams: sequences of requests for Web objects. In particular, many studies have into the nature of reference stream transformations in the Web. I. INTRODUCTION Considerable effort has gone

Keinan, Alon

264

Buried waste integrated demonstration technology integration process  

SciTech Connect (OSTI)

A Technology integration Process was developed for the Idaho National Energy Laboratories (INEL) Buried Waste Integrated Demonstration (BWID) Program to facilitate the transfer of technology and knowledge from industry, universities, and other Federal agencies into the BWID; to successfully transfer demonstrated technology and knowledge from the BWID to industry, universities, and other Federal agencies; and to share demonstrated technologies and knowledge between Integrated Demonstrations and other Department of Energy (DOE) spread throughout the DOE Complex. This document also details specific methods and tools for integrating and transferring technologies into or out of the BWID program. The document provides background on the BWID program and technology development needs, demonstrates the direction of technology transfer, illustrates current processes for this transfer, and lists points of contact for prospective participants in the BWID technology transfer efforts. The Technology Integration Process was prepared to ensure compliance with the requirements of DOE's Office of Technology Development (OTD).

Ferguson, J.S.; Ferguson, J.E.

1992-04-01T23:59:59.000Z

265

Buried waste integrated demonstration technology integration process  

SciTech Connect (OSTI)

A Technology integration Process was developed for the Idaho National Energy Laboratories (INEL) Buried Waste Integrated Demonstration (BWID) Program to facilitate the transfer of technology and knowledge from industry, universities, and other Federal agencies into the BWID; to successfully transfer demonstrated technology and knowledge from the BWID to industry, universities, and other Federal agencies; and to share demonstrated technologies and knowledge between Integrated Demonstrations and other Department of Energy (DOE) spread throughout the DOE Complex. This document also details specific methods and tools for integrating and transferring technologies into or out of the BWID program. The document provides background on the BWID program and technology development needs, demonstrates the direction of technology transfer, illustrates current processes for this transfer, and lists points of contact for prospective participants in the BWID technology transfer efforts. The Technology Integration Process was prepared to ensure compliance with the requirements of DOE`s Office of Technology Development (OTD).

Ferguson, J.S.; Ferguson, J.E.

1992-04-01T23:59:59.000Z

266

Single mode pulsed dye laser oscillator  

DOE Patents [OSTI]

A single mode pulsed dye laser oscillator is disclosed. The dye laser oscillator provides for improved power efficiency by reducing the physical dimensions of the overall laser cavity, which improves frequency selection capability.

Hackel, Richard P. (Livermore, CA)

1992-01-01T23:59:59.000Z

267

PLASTIC DEFORMATIONPLASTIC DEFORMATION Modes of Deformation  

E-Print Network [OSTI]

PLASTIC DEFORMATIONPLASTIC DEFORMATION Modes of Deformation The Uniaxial Tension Test Mechanisms underlying Plastic Deformation Strengthening mechanisms Mechanical Metallurgy George E Dieter McClick here to know about all the mechanisms by which materials fail #12;Slip (Dislocation motion) Plastic

Subramaniam, Anandh

268

Single mode pulsed dye laser oscillator  

DOE Patents [OSTI]

A single mode pulsed dye laser oscillator is disclosed. The dye laser oscillator provides for improved power efficiency by reducing the physical dimensions of the overall laser cavity, which improves frequency selection capability. 6 figs.

Hackel, R.P.

1992-11-24T23:59:59.000Z

269

Rotary Mode Core Sample System availability improvement  

SciTech Connect (OSTI)

The Rotary Mode Core Sample System (RMCSS) is used to obtain stratified samples of the waste deposits in single-shell and double-shell waste tanks at the Hanford Site. The samples are used to characterize the waste in support of ongoing and future waste remediation efforts. Four sampling trucks have been developed to obtain these samples. Truck I was the first in operation and is currently being used to obtain samples where the push mode is appropriate (i.e., no rotation of drill). Truck 2 is similar to truck 1, except for added safety features, and is in operation to obtain samples using either a push mode or rotary drill mode. Trucks 3 and 4 are now being fabricated to be essentially identical to truck 2.

Jenkins, W.W.; Bennett, K.L.; Potter, J.D. [Westinghouse Hanford Co., Richland, WA (United States); Cross, B.T.; Burkes, J.M.; Rogers, A.C. [Southwest Research Institute (United States)

1995-02-28T23:59:59.000Z

270

Two-Mode Theory of BEC Interferometry  

E-Print Network [OSTI]

A theory of BEC interferometry in an unsymmetrical double-well trap has been developed for small boson numbers, based on the two-mode approximation. The bosons are initially in the lowest mode of a single well trap, which is split into a double well and then recombined. Possible fragmentations into separate BEC states in each well during the splitting/recombination process are allowed for. The BEC is treated as a giant spin system, the fragmented states are eigenstates of S^2 and Sz. Self-consistent sets of equations for the amplitudes of the fragmented states and for the two single boson mode functions are obtained. The latter are coupled Gross-Pitaevskii equations. Interferometric effects may be measured via boson numbers in the first excited mode

B J Dalton

2007-02-03T23:59:59.000Z

271

Singular Modes of the Electromagnetic Field  

E-Print Network [OSTI]

We show that the mode corresponding to the point of essential spectrum of the electromagnetic scattering operator is a vector-valued distribution representing the square root of the three-dimensional Dirac's delta function. An explicit expression for this singular mode in terms of the Weyl sequence is provided and analyzed. An essential resonance thus leads to a perfect localization (confinement) of the electromagnetic field, which in practice, however, may result in complete absorption.

Neil V. Budko; Alexander B. Samokhin

2006-06-15T23:59:59.000Z

272

Singular Modes of the Electromagnetic Field  

E-Print Network [OSTI]

We show that the mode corresponding to the point of essential spectrum of the electromagnetic scattering operator is a vector-valued distribution representing the square root of the three-dimensional Dirac's delta function. An explicit expression for this singular mode in terms of the Weyl sequence is provided and analyzed. An essential resonance thus leads to a perfect localization (confinement) of the electromagnetic field, which in practice, however, may result in complete absorption.

Budko, N V; Budko, Neil V.; Samokhin, Alexander B.

2006-01-01T23:59:59.000Z

273

Propagation Plane waves -High order Modes  

E-Print Network [OSTI]

1 Propagation · Plane waves - High order Modes y x a One wave: p(x,y,t)=p0 cos(k y)e-jk x e j t vy(y,t)= 0 ; y=0,a xy } ky = n a Propagation · Plane waves - High order Modes x n a p(x,y,t)=pn cos( y + - +- + + - +- + - + + +- - - (m,n) #12;4 Propagation · Circular duct ­ Helical waves (spiralling waves) kc=m/a kz k

Berlin,Technische Universität

274

Propagation Plane waves -High order Modes  

E-Print Network [OSTI]

1 Propagation · Plane waves - High order Modes y x a ky = n a One wave: p(x,y,t)=p0 cos(k y)e-jk x e j t vy(y,t)= 0 ; y=0,a xy } Propagation · Plane waves - High order Modes x n a p(x,y,t)=pn cos( y;4 Propagation · Circular duct ­ Helical waves (spiralling waves) kc=m/a kz kH Projection: Propagation #12

Berlin,Technische Universität

275

Forecasting Turbulent Modes with Nonparametric Diffusion Models  

E-Print Network [OSTI]

This paper presents a nonparametric diffusion modeling approach for forecasting partially observed noisy turbulent modes. The proposed forecast model uses a basis of smooth functions (constructed with the diffusion maps algorithm) to represent probability densities, so that the forecast model becomes a linear map in this basis. We estimate this linear map by exploiting a previously established rigorous connection between the discrete time shift map and the semi-group solution associated to the backward Kolmogorov equation. In order to smooth the noisy data, we apply diffusion maps to a delay embedding of the noisy data, which also helps to account for the interactions between the observed and unobserved modes. We show that this delay embedding biases the geometry of the data in a way which extracts the most predictable component of the dynamics. The resulting model approximates the semigroup solutions of the generator of the underlying dynamics in the limit of large data and in the observation noise limit. We will show numerical examples on a wide-range of well-studied turbulent modes, including the Fourier modes of the energy conserving Truncated Burgers-Hopf (TBH) model, the Lorenz-96 model in weakly chaotic to fully turbulent regimes, and the barotropic modes of a quasi-geostrophic model with baroclinic instabilities. In these examples, forecasting skills of the nonparametric diffusion model are compared to a wide-range of stochastic parametric modeling approaches, which account for the nonlinear interactions between the observed and unobserved modes with white and colored noises.

Tyrus Berry; John Harlim

2015-01-27T23:59:59.000Z

276

Edge-localized-modes in tokamaks  

SciTech Connect (OSTI)

Edge-localized-modes (ELMs) are a ubiquitous feature of H-mode in tokamaks. When gradients in the H-mode transport barrier grow to exceed the MHD stability limit the ELM instability grows explosively, rapidly transporting energy and particles onto open field lines and material surfaces. Though ELMs provide additional particle and impurity transport through the H-mode transport barrier, enabling steady operation, the resulting heat flux transients to plasma facing surfaces project to large amplitude in future low collisionality burning plasma tokamaks. Measurements of the ELM heat flux deposition onto material surfaces in the divertor and main chamber indicate significant broadening compared to inter-ELM heat flux, with a timescale for energy deposition that is consistent with sonic ion flow and numerical simulation. Comprehensive ELM simulation is highlighting the important physics processes of ELM transport including parallel transport due to magnetic reconnection and turbulence resulting from collapse of the H-mode transport barrier. Encouraging prospects for ELM control and/or suppression in future tokamaks include intrinsic modes of ELM free operation, ELM triggering with frequent small pellet injection and the application of 3D magnetic fields.

Leonard, A. W. [General Atomics, PO Box 85608, San Diego, California 92186-5608 (United States)

2014-09-15T23:59:59.000Z

277

The effects of sliding pressure operation on utility boiler tube integrity  

SciTech Connect (OSTI)

Sliding pressure operation is employed by utilities to optimize efficiency during periods of reduced load demand. However, this mode of operation can lead to a deterioration in boiler tube integrity. The various mechanisms involved and their effects on tube integrity are discussed. Case histories are also provided, which illustrate these phenomena.

Dewitt-Dick, D.B.; Wangerin, M.C. [Ashland Chemical Co., Boonton, NJ (United States). Ashland Chemical Co.

1996-08-01T23:59:59.000Z

278

Sandia National Laboratories: Failure Mode and Effect Analysis...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

ProcessFailure Mode and Effect Analysis (FMEA) Tutorial Failure Mode and Effect Analysis (FMEA) Tutorial Failure Mode and Effect Analysis (FMEA) Tutorial (SAND2012-0602W) Tagged...

279

Toroidal kinetic eta{sub i}-mode study in reversed-field pinch plasmas  

SciTech Connect (OSTI)

The ion temperature gradient (ITG) driven electrostatic modes in reversed-field pinch (RFP) plasma are studied with the gyrokinetic integral equation. A systematic threshold study is carried out and the results are compared with that in tokamaks with similar geometry and reveal that the ITG modes in RFP configurations are more stable than in tokamaks. The physics mechanism for such difference is that shorter connection length in RFPs leads to stronger landau damping, which is dominant and ultimately determinant for the stability threshold. The results confirm and extend the previous conclusion obtained with the differential equation [S. C. Guo, Phys. Plasmas 13, 122510 (2008)]. In addition, the effects of magnetic gradient and curvature drifts, which induce important interaction driving the modes, are carefully investigated. The effects of safety factor, ratio of electron temperature to ion temperature, magnetic shear as well as finite Larmor radius are also studied.

Liu Songfen [Department of Physics, Nankai University, Tianjin 300071 (China); Guo, S. C. [Consorzio RFX, Associazione Euratom-ENEA sulla fusione, Corso Stati Uniti 4, Padova 35127 (Italy); Dong, J. Q. [Institute for Fusion Theory and Simulation, Zhejiang University, Hangzhou 310027 (China) and Southwestern Institute of Physics, Chengdu 610041 (China)

2010-05-15T23:59:59.000Z

280

Demonstration of coherent time-frequency Schmidt mode selection using dispersion-engineered frequency conversion  

E-Print Network [OSTI]

Time-frequency Schmidt (TFS) modes of ultrafast quantum states are naturally compatible with high bit-rate integrated quantum communication networks. Thus they offer an attractive alternative for the realization of high dimensional quantum optics. Here, we present a quantum pulse gate based on dispersion-engineered ultrafast frequency conversion in a nonlinear optical waveguide, which is a key element for harnessing the potential of TFS modes. We experimentally retrieve the modal spectral-temporal structure of our device and demonstrate a single-mode operation fidelity of 80\\%, which is limited by experimental shortcomings. In addition, we retrieve a conversion efficiency of 87.7\\% with a high signal-to-noise ratio of 8.8 when operating the quantum pulse gate at the single-photon level.

Benjamin Brecht; Andreas Eckstein; Raimund Ricken; Viktor Quiring; Hubertus Suche; Linda Sansoni; Christine Silberhorn

2014-09-16T23:59:59.000Z

Note: This page contains sample records for the topic "integration mode reference" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

INTEGRATING PHOTOVOLTAIC SYSTEMS  

E-Print Network [OSTI]

INTEGRATING PHOTOVOLTAIC SYSTEMS INTO PUBLIC SECTOR PERFORMANCE CONTRACTS IN DELAWARE FINAL for Energy and Environmental Policy University of Delaware February 2006 #12;INTEGRATING PHOTOVOLTAIC..................................................................................................... 1 1.2 Photovoltaics in Performance Contracts: An Overview

Delaware, University of

282

Transmission Commercial Project Integration  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Improvement (CBPI) Customer Forum Energy Imbalance Market Generator Interconnection Reform Implementation Network Integration Transmission Service (NT Service) Network Open...

283

Biomass Scenario Model Documentation: Data and References  

SciTech Connect (OSTI)

The Biomass Scenario Model (BSM) is a system dynamics model that represents the entire biomass-to-biofuels supply chain, from feedstock to fuel use. The BSM is a complex model that has been used for extensive analyses; the model and its results can be better understood if input data used for initialization and calibration are well-characterized. It has been carefully validated and calibrated against the available data, with data gaps filled in using expert opinion and internally consistent assumed values. Most of the main data sources that feed into the model are recognized as baseline values by the industry. This report documents data sources and references in Version 2 of the BSM (BSM2), which only contains the ethanol pathway, although subsequent versions of the BSM contain multiple conversion pathways. The BSM2 contains over 12,000 total input values, with 506 distinct variables. Many of the variables are opportunities for the user to define scenarios, while others are simply used to initialize a stock, such as the initial number of biorefineries. However, around 35% of the distinct variables are defined by external sources, such as models or reports. The focus of this report is to provide insight into which sources are most influential in each area of the supply chain.

Lin, Y.; Newes, E.; Bush, B.; Peterson, S.; Stright, D.

2013-05-01T23:59:59.000Z

284

WECC Variable Generation Planning Reference Book: Appendices  

SciTech Connect (OSTI)

The document titled “WECC Variable Generation Planning Reference Book”. This book is divided into two volumes; one is the main document (volume 1)and the other is appendices (volume 2). The main document is a collection of the best practices and the information regarding the application and impact of variables generation on power system planning. This volume (appendices) has additional information on the following topics: Probabilistic load flow problems. 2. Additional useful indices. 3. high-impact low-frequency (HILF) events. 4. Examples of wide-area nomograms. 5. Transmission line ratings, types of dynamic rating methods. 6. Relative costs per MW-km of different electric power transmission technologies. 7. Ultra-high voltage (UHV) transmission. 8.High voltage direct current (VSC-HVDC). 9. HVDC. 10. Rewiring of existing transmission lines. 11. High-temperature low sag (HTLS) conductors. 12. The direct method and energy functions for transient stability analysis in power systems. 13.Blackouts caused by voltage instability. 14. Algorithm for parameter continuation predictor-corrector methods. 15. Approximation techniques available for security regions. 16. Impacts of wind power on power system small signals stability. 17. FIDVR. 18. FACTS. 19. European planning standard and practices. 20. International experience in wind and solar energy sources. 21. Western Renewable Energy Zones (WREZ). 22. various energy storage technologies. 23. demand response. 24. BA consolidation and cooperation options. 25. generator power management requirements and 26. European planning guidelines.

Makarov, Yuri V.; Du, Pengwei; Etingov, Pavel V.; Ma, Jian; Vyakaranam, Bharat

2013-05-13T23:59:59.000Z

285

Video integrated measurement system. [Diagnostic display devices  

SciTech Connect (OSTI)

A Video Integrated Measurement (VIM) System is described which incorporates the use of various noninvasive diagnostic procedures (moire contourography, electromyography, posturometry, infrared thermography, etc.), used individually or in combination, for the evaluation of neuromusculoskeletal and other disorders and their management with biofeedback and other therapeutic procedures. The system provides for measuring individual diagnostic and therapeutic modes, or multiple modes by split screen superimposition, of real time (actual) images of the patient and idealized (ideal-normal) models on a video monitor, along with analog and digital data, graphics, color, and other transduced symbolic information. It is concluded that this system provides an innovative and efficient method by which the therapist and patient can interact in biofeedback training/learning processes and holds considerable promise for more effective measurement and treatment of a wide variety of physical and behavioral disorders.

Spector, B.; Eilbert, L.; Finando, S.; Fukuda, F.

1982-06-01T23:59:59.000Z

286

Mode Initialization for On-line Estimation of Power System Electromechanical Modes  

SciTech Connect (OSTI)

Measurement-based mode estimation methods are utilized to estimate electromechanical modes of a power system using phasor measurement units (PMU) data. These methods need to extract a certain amount of information before they can give useable mode estimation. Traditionally, the information is gathered solely from measurement data. Priori mode information from other resources (e.g. model eigenvalue analysis, engineering knowledge) are not fully utilized. For real time application, this means that mode estimation takes time to converge. By adding a mode regularization term in the objective function, this paper proposes a mode initialization method to include priori mode information in a regularized robust recursive least squares (R3LS) algorithm for on-line mode estimation. The proposed method is tested using a simple model, a 17 machine model and is shown to be able to shorten the convergence period of the R3LS algorithm. The proposed method is also applied on the measurement data recorded right before a major power outage in the western North American Grid on August 10th 1996 to show its potential applica-tion in detecting an approaching small signal stability problem.

Zhou, Ning; Trudnowski, Daniel; Pierre, John W.

2009-03-18T23:59:59.000Z

287

Modeling Combustion Control for High Power Diesel Mode Switching...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Combustion Control for High Power Diesel Mode Switching Modeling Combustion Control for High Power Diesel Mode Switching Poster presentation given at the 16th Directions in...

288

Unregulated Emissions from High-Efficiency Clean Combustion Modes...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Unregulated Emissions from High-Efficiency Clean Combustion Modes - ORNL-FEERC Unregulated Emissions from High-Efficiency Clean Combustion Modes - ORNL-FEERC Poster presentation at...

289

Modeling Combustion Control for High Power Diesel Mode Switching  

Broader source: Energy.gov (indexed) [DOE]

and Emissions Research Conference 2010 Modeling Combustion Control for High Power Diesel Mode Switching P-20 Motivation * High power LTC-diesel mode operation * Transient...

290

Burning Modes and Oxidation Rates of Soot: Relevance to Diesel...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Burning Modes and Oxidation Rates of Soot: Relevance to Diesel Particulate Traps Burning Modes and Oxidation Rates of Soot: Relevance to Diesel Particulate Traps Presentation given...

291

Sequestering Uranium from Seawater: Binding Strength and Modes...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Sequestering Uranium from Seawater: Binding Strength and Modes of Uranyl Complexes with Glutarimidedioxime Sequestering Uranium from Seawater: Binding Strength and Modes of Uranyl...

292

Mixed-mode diesel HCCI with External Mixture Formation: Preliminary...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Mixed-mode diesel HCCI with External Mixture Formation: Preliminary Results Mixed-mode diesel HCCI with External Mixture Formation: Preliminary Results 2003 DEER Conference...

293

Human events reference for ATHEANA (HERA) database description and preliminary user`s manual  

SciTech Connect (OSTI)

The Technique for Human Error Analysis (ATHEANA) is a newly developed human reliability analysis (HRA) methodology that aims to facilitate better representation and integration of human performance into probabilistic risk assessment (PRA) modeling and quantification by analyzing risk-significant operating experience in the context of existing behavioral science models. The fundamental premise of ATHEANA is that error-forcing contexts (EFCs), which refer to combinations of equipment/material conditions and performance shaping factors (PSFs), set up or create the conditions under which unsafe actions (UAs) can occur. Because ATHEANA relies heavily on the analysis of operational events that have already occurred as a mechanism for generating creative thinking about possible EFCs, a database, called the Human Events Reference for ATHEANA (HERA), has been developed to support the methodology. This report documents the initial development efforts for HERA.

Auflick, J.L.; Hahn, H.A.; Pond, D.J.

1998-05-27T23:59:59.000Z

294

Human Events Reference for ATHEANA (HERA) Database Description and Preliminary User's Manual  

SciTech Connect (OSTI)

The Technique for Human Error Analysis (ATHEANA) is a newly developed human reliability analysis (HRA) methodology that aims to facilitate better representation and integration of human performance into probabilistic risk assessment (PRA) modeling and quantification by analyzing risk-significant operating experience in the context of existing behavioral science models. The fundamental premise of ATHEANA is that error forcing contexts (EFCs), which refer to combinations of equipment/material conditions and performance shaping factors (PSFs), set up or create the conditions under which unsafe actions (UAs) can occur. Because ATHEANA relies heavily on the analysis of operational events that have already occurred as a mechanism for generating creative thinking about possible EFCs, a database (db) of analytical operational events, called the Human Events Reference for ATHEANA (HERA), has been developed to support the methodology. This report documents the initial development efforts for HERA.

Auflick, J.L.

1999-08-12T23:59:59.000Z

295

Microsoft PowerPoint - ostiorgchart [Compatibility Mode  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Director Brian A. Hitson Director Administration & Information Services Deborah E. Cutler Acting Associate Director Program Integration Mark A. Martin Assistant Director...

296

Advanced Integrated Systems Technology Development  

E-Print Network [OSTI]

conditioning in buildings featuring integrated design withconditioning in buildings featuring integrated design withof a building with advanced integrated design involving one

2013-01-01T23:59:59.000Z

297

International linear collider reference design report  

SciTech Connect (OSTI)

The International Linear Collider will give physicists a new cosmic doorway to explore energy regimes beyond the reach of today's accelerators. A proposed electron-positron collider, the ILC will complement the Large Hadron Collider, a proton-proton collider at the European Center for Nuclear Research (CERN) in Geneva, Switzerland, together unlocking some of the deepest mysteries in the universe. With LHC discoveries pointing the way, the ILC -- a true precision machine -- will provide the missing pieces of the puzzle. Consisting of two linear accelerators that face each other, the ILC will hurl some 10 billion electrons and their anti-particles, positrons, toward each other at nearly the speed of light. Superconducting accelerator cavities operating at temperatures near absolute zero give the particles more and more energy until they smash in a blazing crossfire at the centre of the machine. Stretching approximately 35 kilometres in length, the beams collide 14,000 times every second at extremely high energies -- 500 billion-electron-volts (GeV). Each spectacular collision creates an array of new particles that could answer some of the most fundamental questions of all time. The current baseline design allows for an upgrade to a 50-kilometre, 1 trillion-electron-volt (TeV) machine during the second stage of the project. This reference design provides the first detailed technical snapshot of the proposed future electron-positron collider, defining in detail the technical parameters and components that make up each section of the 31-kilometer long accelerator. The report will guide the development of the worldwide R&D program, motivate international industrial studies and serve as the basis for the final engineering design needed to make an official project proposal later this decade.

Aarons, G.

2007-06-22T23:59:59.000Z

298

Detecting individual gravity modes in the Sun  

E-Print Network [OSTI]

Many questions are still open regarding the structure and the dynamics of the solar core. By constraining more this region in the solar evolution models, we can reduce the incertitudes on some physical processes and on momentum transport mechanisms. A first big step was made with the detection of the signature of the dipole-gravity modes in the Sun, giving a hint of a faster rotation rate inside the core. A deeper analysis of the GOLF/SoHO data unveils the presence of a pattern of peaks that could be interpreted as dipole gravity modes. In that case, those modes can be characterized, thus bringing better constraints on the rotation of the core as well as some structural parameters such as the density at these very deep layers of the Sun interior.

Garcia, R A; Eff-Darwich, A; Garrido, R; Jimenez, A; Mathis, S; Moya, A; Palle, P L; Regulo, C; Salabert, D; Suarez, J C; Turck-Chieze, S

2009-01-01T23:59:59.000Z

299

Self-Similar Modes of Coherent Diffusion  

E-Print Network [OSTI]

Self-similar solutions of the coherent diffusion equation are derived and measured. The set of real similarity solutions is generalized by the introduction of a nonuniform phase surface, based on the elegant Gaussian modes of optical diffraction. In an experiment of light storage in a gas of diffusing atoms, a complex initial condition is imprinted, and its diffusion dynamics is monitored. The self-similarity of both the amplitude and the phase pattern is demonstrated, and an algebraic decay associated with the mode order is measured. Notably, as opposed to a regular diffusion spreading, a self-similar contraction of a special subset of the solutions is predicted and observed.

O. Firstenberg; P. London; D. Yankelev; R. Pugatch; M. Shuker; N. Davidson

2010-08-16T23:59:59.000Z

300

Head-Tail Modes for Strong Space Charge  

SciTech Connect (OSTI)

Head-tail modes are described here for the space charge tune shift significantly exceeding the synchrotron tune. General equation for the modes is derived. Spatial shapes of the modes, their frequencies, and coherent growth rates are explored. The Landau damping rates are also found. Suppression of the transverse mode coupling instability by the space charge is explained.

Burov, Alexey

2008-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "integration mode reference" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

EERE Postdoctoral Research Award Letter of Reference Form  

Broader source: Energy.gov [DOE]

EERE Postdoctoral Research Award Letter of Reference Form, from the U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy.

302

FAQS Reference Guide – Safeguards and Security General Technical Base  

Broader source: Energy.gov [DOE]

This reference guide addresses the competency statements in the July 2009 edition of DOE-STD-1123-2009, Safeguards and Security General Technical Base Qualification Standard.

303

DOE Commercial Reference Buildings Summary of Changes Between...  

Broader source: Energy.gov (indexed) [DOE]

Buildings refbldgschangesv40tov70.pdf More Documents & Publications DOE Commercial Reference Buildings Summary of Changes Between Versions Department of Energy Commercial...

304

Reference Buildings by Climate Zone and Representative City:...  

Broader source: Energy.gov (indexed) [DOE]

A Minneapolis, Minnesota Reference Buildings by Climate Zone and Representative City: 6A Minneapolis, Minnesota In addition to the ZIP file for each building type, you can directly...

305

Draft SPD SEIS Master Reference List | National Nuclear Security...  

National Nuclear Security Administration (NNSA)

Policy Act (NEPA) NEPA Reading Room Surplus Plutonium Disposition Supplemental Environmental Impact Statement Draft SPD SEIS Master Reference List Draft SPD SEIS Master...

306

UNIX/LINUX REFERENCE CARD Basic File and Directory Manipulation  

E-Print Network [OSTI]

UNIX/LINUX REFERENCE CARD Basic File and Directory Manipulation ls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . List directory contents cp. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Link files cd. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Change directory pwd

307

Existing Commercial Reference Buildings Constructed In or After 1980 — Archive  

Broader source: Energy.gov [DOE]

Here you will find past versions of the commercial reference building models for existing buildings constructed in or after 1980, organized by building type and location.

308

Polymorphic Typing of Variables and References GEOFFREY SMITH  

E-Print Network [OSTI]

Polymorphic Typing of Variables and References GEOFFREY SMITH Florida International University reflect the views of the National Science Foundation. Authors' addresses: G. Smith, School of Computer

Smith, Geoffrey

309

2012 Annual Merit Review Results Report - Cross-Reference of...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Review Results Report - Cross-reference of Project Investigators, Projects, and Organizations 2011 Annual Merit Review Results Report - Hybrid and Vehicle Systems Technologies...

310

2013 Annual Merit Review Results Report - Cross-Reference of...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Review Results Report - Cross-reference of Project Investigators, Projects, and Organizations 2011 Annual Merit Review Results Report - Hybrid and Vehicle Systems Technologies...

311

Reference Model for Control and Automation Systems in Electrical...  

Broader source: Energy.gov (indexed) [DOE]

Reference Model for Control and Automation Systems in Electrical Power Version 1.2 October 12, 2005 Prepared by: Sandia National Laboratories' Center for SCADA Security Jason...

312

TERMINATION OF SIMPLY MODED WELLTYPED LOGIC PROGRAMS  

E-Print Network [OSTI]

TERMINATION OF SIMPLY MODED WELL­TYPED LOGIC PROGRAMS UNDER TABLED EXECUTION MECHANISM Sofie mechanism for logic programs. In particular, tabled execution of logic programs terminates more often than execution based on SLD­resolution. So, if a program can be proven to terminate under SLD­resolution (by one

Giesl, Juergen

313

Deep reflection-mode photoacoustic imaging of  

E-Print Network [OSTI]

near-infrared laser pulses of 804-nm wavelength for PA excitation to achieve deep penetration-frequency PAM system. To achieve deep penetration of light, we chose the 804-nm near-infrared wavelengthDeep reflection-mode photoacoustic imaging of biological tissue Kwang Hyun Song and Lihong V. Wang

Wang, Lihong

314

Standby and Off-Mode Energy Losses  

E-Print Network [OSTI]

1 Standby and Off-Mode Energy Losses In New Appliances Measured in Shops #12;ISBN: 978 with the University of Coimbra. Its research interests include energyefficient technologies, renewable energies, and energy planning. Recent work includes the coordination of several European projects on market

Paris-Sud XI, Université de

315

Do red giants have short mode lifetimes?  

E-Print Network [OSTI]

We show evidence that the red giant star ksi Hya has an oscillation mode lifetime, tau, of about 2 days significantly shorter than predicted by theory (tau = 17 days, Houdek & Gough 2002). If this is a general trend of red giants it would limit the prospects of asteroseismology on these stars because of poor coherence of the oscillations.

D. Stello; H. Kjeldsen; T. R. Bedding; D. Buzasi

2005-10-18T23:59:59.000Z

316

Psychological Insights on Transportation Mode Choice  

E-Print Network [OSTI]

transportation modes such as bicycles, car sharing, and mass transit. Case studies were conducted with currentAlternatives to single occupancy vehicles:occupancy vehicles: Bicycles Buses Light rail Car sharing Car pooling Photo a car..." (TriMet Journal, March 6, 2006) He had been waiting for the train at the MAX platform (at 6 PM

Bertini, Robert L.

317

Thermionic converter in load-switching mode  

SciTech Connect (OSTI)

An electrical equivalent circuit is proposed for a thermionic electrogenerating element. It is suitable for calculation of transients in load-switching mode. Formulas are given for estimating circuit parameters. A sample numerical calculation is given for the transient between no-load and short-circuit regimes. The results may be employed to identify experimental data in the frequency domain.

Mendel'baum, M.A.; Es'kov, V.D.

1983-01-01T23:59:59.000Z

318

HYDROGEN LOCAL VIBRATIONAL MODES IN COMPOUND SEMICONDUCTORS  

E-Print Network [OSTI]

HYDROGEN LOCAL VIBRATIONAL MODES IN COMPOUND SEMICONDUCTORS M.D. MCCLUSKEY* University) spectroscopy of hydrogen and deuterium in GaP, AlSb, ZnSe, and GaN has provided important information about the structures of dopant- hydrogen complexes and their interaction with the host lattice. In GaN:Mg, for example

McCluskey, Matthew

319

Algal Integrated Biorefineries  

Broader source: Energy.gov [DOE]

The Algae Program works closely with the Demonstration and Deployment Program on projects that can validate advancements toward commercialization at increasing scales. Integrated biorefineries...

320

Technology Integration Overview  

Broader source: Energy.gov (indexed) [DOE]

Technology Integration Overview Dennis A. Smith - Clean Cities Deployment Connie Bezanson - Vehicle Education June 17, 2014 VEHICLE TECHNOLOGIES OFFICE This presentation does not...

Note: This page contains sample records for the topic "integration mode reference" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Technology Integration Overview  

Broader source: Energy.gov (indexed) [DOE]

-Technology Integration Overview - Dennis A. Smith Connie Bezanson U. S. Department of Energy Headquarters Office - Washington, D.C. May 2013 Project ID: TI000 2013 Department of...

322

Integrated Technology Deployment  

Office of Energy Efficiency and Renewable Energy (EERE)

Integrated technology deployment is a comprehensive approach to implementing solutions that increase the use of energy efficiency and renewable energy technologies. Federal, state, and local...

323

Temperature-package power correlations for open-mode geologic disposal concepts.  

SciTech Connect (OSTI)

Logistical simulation of spent nuclear fuel (SNF) management in the U.S. combines storage, transportation and disposal elements to evaluate schedule, cost and other resources needed for all major operations leading to final geologic disposal. Geologic repository reference options are associated with limits on waste package thermal power output at emplacement, in order to meet limits on peak temperature for certain key engineered and natural barriers. These package power limits are used in logistical simulation software such as CALVIN, as threshold requirements that must be met by means of decay storage or SNF blending in waste packages, before emplacement in a repository. Geologic repository reference options include enclosed modes developed for crystalline rock, clay or shale, and salt. In addition, a further need has been addressed for open modes in which SNF can be emplaced in a repository, then ventilated for decades or longer to remove heat, prior to permanent repository closure. For each open mode disposal concept there are specified durations for surface decay storage (prior to emplacement), repository ventilation, and repository closure operations. This study simulates those steps for several timing cases, and for SNF with three fuel-burnup characteristics, to develop package power limits at which waste packages can be emplaced without exceeding specified temperature limits many years later after permanent closure. The results are presented in the form of correlations that span a range of package power and peak postclosure temperature, for each open-mode disposal concept, and for each timing case. Given a particular temperature limit value, the corresponding package power limit for each case can be selected for use in CALVIN and similar tools.

Hardin, Ernest L.

2013-02-01T23:59:59.000Z

324

Standard Reference Material 1751: Gallium Melting-Point Standard  

E-Print Network [OSTI]

Standard Reference Material 1751: Gallium Melting-Point Standard Gregory F. Strouse NIST Special Publication 260-157 #12;#12;NIST Special Publication 260-157 XXXX Standard Reference Material 1751: Gallium Melting-Point Standard Gregory F. Strouse Chemical Science and Technology Laboratory Process Measurements

325

Dynamic Stochastic Inventory Management with Reference Price Effects  

E-Print Network [OSTI]

Dynamic Stochastic Inventory Management with Reference Price Effects Xin Chen Department in which demand depends on not only the current selling price but also a memory-based reference price. Pricing and inventory decisions are made simultane- ously at the beginning of each period. Assuming all

Chen, Xin

326

TLG Beta Code Quick Reference Guide Revised: July 16, 2009  

E-Print Network [OSTI]

TLG Beta Code Quick Reference Guide Revised: July 16, 2009 This document provides a quick reference to Beta Code and its Unicode equivalents. For a comprehensive overview of Beta Code, please see the TLG Beta Code Manual. Unicode equivalents are correct as of Unicode 5.1. Table of Contents Notes

Loudon, Catherine

327

Archived Reference Climate Zone: 3B Los Angeles, California  

Broader source: Energy.gov [DOE]

Here you will find past versions of the commercial reference building models for existing buildings constructed before 1980, organized by building type and location. A summary ofbuilding types and climate zones is available for reference. Current versions are also available.

328

Archived Reference Climate Zone: 3B Los Angeles, California  

Broader source: Energy.gov [DOE]

Here you will find past versions of the commercial reference building models for existing buildings constructed in or after 1980, organized by building type and location. A summary of building types and climate zones is available for reference. Current versions are also available.

329

Program Self-Reference in Constructive Scott Subdomains  

E-Print Network [OSTI]

Program Self-Reference in Constructive Scott Subdomains John Case and Samuel E. Moelius III( e, · )]. (1) (b) (Rogers [Rog67, Theorem 11-I]) fprt holds in ( computable t : N N)(e)[e = t(e of program self-reference in PC. A generalization of krt to arbitrary constructive Scott subdomains

Taufer, Michela

330

Archived Reference Climate Zone: 3B Las Vegas, Nevada  

Broader source: Energy.gov [DOE]

Here you will find past versions of the commercial reference building models for existing buildings constructed before 1980, organized by building type and location. A summary ofbuilding types and climate zones is available for reference. Current versions are also available.

331

Archived Reference Climate Zone: 3B Las Vegas, Nevada  

Broader source: Energy.gov [DOE]

Here you will find past versions of the commercial reference building models for existing buildings constructed in or after 1980, organized by building type and location. A summary of building types and climate zones is available for reference. Current versions are also available.

332

Archived Reference Climate Zone: TMY2 Weather Data  

Broader source: Energy.gov [DOE]

Here you will find past versions of the commercial reference building models for existing buildings constructed in or after 1980, organized by building type and location. A summary of building types and climate zones is available for reference. Current versions are also available.

333

Archived Reference Climate Zone: TMY2 Weather Data  

Broader source: Energy.gov [DOE]

Here you will find past versions of the commercial reference building models for existing buildings constructed before 1980, organized by building type and location. A summary ofbuilding types and climate zones is available for reference. Current versions are also available.

334

NIST Special Publication 260-173 Standard Reference Materials  

E-Print Network [OSTI]

NIST Special Publication 260-173 Standard Reference Materials: SRM 1450d, Fibrous-Glass Board #12;#12;NIST Special Publication 260-173 Standard Reference Materials: SRM 1450d, Fibrous-Glass Board Laboratory Building Environment Division Stefan D. Leigh Information Technology Laboratory Statistical

335

Archived Reference Climate Zone: 2A Houston, Texas  

Broader source: Energy.gov [DOE]

Here you will find past versions of the commercial reference building models for existing buildings constructed before 1980, organized by building type and location. A summary ofbuilding types and climate zones is available for reference. Current versions are also available.

336

Archived Reference Climate Zone: 2A Houston, Texas  

Broader source: Energy.gov [DOE]

Here you will find past versions of the commercial reference building models for existing buildings constructed in or after 1980, organized by building type and location. A summary of building types and climate zones is available for reference. Current versions are also available.

337

Using Prefetching to Improve Reference-Counting Garbage Collectors  

E-Print Network [OSTI]

Using Prefetching to Improve Reference-Counting Garbage Collectors Harel Paz 1 and Erez Petrank 2 1-counting collector. We propose potential prefetching opportunities for the advanced reference-counting collector and report an implementation of a collector that employs such prefetch- ing. The proposed prefetch

Petrank, Erez

338

Air Quality: Air Pollutants, SLAC Emissions Sources, and Regulatory Reference  

E-Print Network [OSTI]

permit regulations are designed to track, record, and control air pollutants belonging to severalAir Quality: Air Pollutants, SLAC Emissions Sources, and Regulatory Reference Department: Chemical on chemical classifications. This reference outlines major categories of air pollutants found at SLAC

Wechsler, Risa H.

339

General References Name Author(s) of Book  

E-Print Network [OSTI]

This is the third Special Circular installment of useful horticultural references for green-industry professionals, horticultural educators, and gardeners. This work-in-progress is a compilation of references that horticulturists use on a regular basis. If there are any books that should be added to this list,

Pamela J. Bennett; Gary Y. Gao; David L; Clement; Ethel Dutky; Michael A; Dirr; Charles W; Fred Hower; Alison; Michael A; Of Woody Plant; Of North

340

UNIVERSITY COUNCIL ON ANIMAL CARE (UCAC) Terms of Reference  

E-Print Network [OSTI]

's Terms of Reference; AUS-approved Standard Operating Procedures (SOPs). b) Ensure that the University, maintenance and use of animals as defined by the Canadian Council on Animal Care (CCAC), hereafter referred Canada. iv) The Canadian Association of Laboratory Medicine's Standards of Animal Care; v) The Animals

Lennard, William N.

Note: This page contains sample records for the topic "integration mode reference" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Benchmarking kinetic calculations of resistive wall mode stability  

SciTech Connect (OSTI)

Validating the calculations of kinetic resistive wall mode (RWM) stability is important for confidently predicting RWM stable operating regions in ITER and other high performance tokamaks for disruption avoidance. Benchmarking the calculations of the Magnetohydrodynamic Resistive Spectrum—Kinetic (MARS-K) [Y. Liu et al., Phys. Plasmas 15, 112503 (2008)], Modification to Ideal Stability by Kinetic effects (MISK) [B. Hu et al., Phys. Plasmas 12, 057301 (2005)], and Perturbed Equilibrium Nonambipolar Transport (PENT) [N. Logan et al., Phys. Plasmas 20, 122507 (2013)] codes for two Solov'ev analytical equilibria and a projected ITER equilibrium has demonstrated good agreement between the codes. The important particle frequencies, the frequency resonance energy integral in which they are used, the marginally stable eigenfunctions, perturbed Lagrangians, and fluid growth rates are all generally consistent between the codes. The most important kinetic effect at low rotation is the resonance between the mode rotation and the trapped thermal particle's precession drift, and MARS-K, MISK, and PENT show good agreement in this term. The different ways the rational surface contribution was treated historically in the codes is identified as a source of disagreement in the bounce and transit resonance terms at higher plasma rotation. Calculations from all of the codes support the present understanding that RWM stability can be increased by kinetic effects at low rotation through precession drift resonance and at high rotation by bounce and transit resonances, while intermediate rotation can remain susceptible to instability. The applicability of benchmarked kinetic stability calculations to experimental results is demonstrated by the prediction of MISK calculations of near marginal growth rates for experimental marginal stability points from the National Spherical Torus Experiment (NSTX) [M. Ono et al., Nucl. Fusion 40, 557 (2000)].

Berkery, J. W.; Sabbagh, S. A. [Department of Applied Physics and Applied Mathematics, Columbia University, New York, New York 10027 (United States)] [Department of Applied Physics and Applied Mathematics, Columbia University, New York, New York 10027 (United States); Liu, Y. Q. [Euratom/CCFE Fusion Association, Culham Science Centre, Abingdon OX14 3DB (United Kingdom)] [Euratom/CCFE Fusion Association, Culham Science Centre, Abingdon OX14 3DB (United Kingdom); Wang, Z. R.; Logan, N. C.; Park, J.-K.; Manickam, J. [Princeton Plasma Physics Laboratory, Princeton University, Princeton, New Jersey 08543 (United States)] [Princeton Plasma Physics Laboratory, Princeton University, Princeton, New Jersey 08543 (United States); Betti, R. [Laboratory for Laser Energetics, University of Rochester, Rochester, New York 14623 (United States)] [Laboratory for Laser Energetics, University of Rochester, Rochester, New York 14623 (United States)

2014-05-15T23:59:59.000Z

342

Field Quantization, Photons and Non-Hermitean Modes  

E-Print Network [OSTI]

Field quantization in three dimensional unstable optical systems is treated by expanding the vector potential in terms of non-Hermitean (Fox-Li) modes in both the cavity and external regions. The cavity non-Hermitean modes (NHM) are treated using the paraxial and monochromaticity approximations. The NHM bi-orthogonality relationships are used in a standard canonical quantization procedure based on introducing generalised coordinates and momenta for the electromagnetic (EM) field. The quantum EM field is equivalent to a set of quantum harmonic oscillators (QHO), associated with either the cavity or the external region NHM. This confirms the validity of the photon model in unstable optical systems, though the annihilation and creation operators for each QHO are not Hermitean adjoints. The quantum Hamiltonian for the EM field is the sum of non-commuting cavity and external region contributions, each of which is sum of independent QHO Hamiltonians for each NHM, but the external field Hamiltonian also includes a coupling term responsible for external NHM photon exchange processes. Cavity energy gain and loss processes is associated with the non-commutativity of cavity and external region operators, given in terms of surface integrals involving cavity and external region NHM functions on the cavity-external region boundary. The spontaneous decay of a two-level atom inside an unstable cavity is treated using the essential states approach and the rotating wave approximation. Atomic transitions leading to cavity NHM photon absorption have a different coupling constant to those leading to photon emission, a feature resulting from the use of NHM functions. Under certain conditions the decay rate is enhanced by the Petermann factor.

S. A. Brown; B. J. Dalton

2001-09-10T23:59:59.000Z

343

Systems Integration (Fact Sheet)  

SciTech Connect (OSTI)

The Systems Integration (SI) subprogram works closely with industry, universities, and the national laboratories to overcome technical barriers to the large-scale deployment of solar technologies. To support these goals, the subprogram invests primarily in four areas: grid integration, technology validation, solar resource assessment, and balance of system development.

Not Available

2011-10-01T23:59:59.000Z

344

Water Waves and Integrability  

E-Print Network [OSTI]

The Euler's equations describe the motion of inviscid fluid. In the case of shallow water, when a perturbative asymtotic expansion of the Euler's equations is taken (to a certain order of smallness of the scale parameters), relations to certain integrable equations emerge. Some recent results concerning the use of integrable equation in modeling the motion of shallow water waves are reviewed in this contribution.

Rossen I. Ivanov

2007-07-12T23:59:59.000Z

345

Radical Matter: Materiality in Postwar and Contemporary American Mixed Mode Poetry  

E-Print Network [OSTI]

Mixed  Mode  Poetry   By   Sophia  Wang   A  dissertation  Mode  Poetry   by   Sophia  Wang   Doctor  of  Philosophy  

Wang, Sophia

2012-01-01T23:59:59.000Z

346

Mode-synthesizing atomic force microscopy and mode-synthesizing sensing  

DOE Patents [OSTI]

A method of analyzing a sample that includes applying a first set of energies at a first set of frequencies to a sample and applying, simultaneously with the applying the first set of energies, a second set of energies at a second set of frequencies, wherein the first set of energies and the second set of energies form a multi-mode coupling. The method further includes detecting an effect of the multi-mode coupling.

Passain, Ali; Thundat, Thomas George; Tetard, Laurene

2014-07-22T23:59:59.000Z

347

Blue carbon storage potential of marine carbonate deposits Project reference IAP/13/50. Please quote this reference when applying.  

E-Print Network [OSTI]

IAPETUS Blue carbon storage potential of marine carbonate deposits Project reference IAP/13 Henrik Stahl, Scottish Association for Marine Science Key Words 1. Blue carbon 2. Carbonate 3. Coralline is referred to as `blue carbon' to differentiate it from terrestrial carbon stores. Known blue carbon sinks

Guo, Zaoyang

348

Electron acceleration by Z-mode and whistler-mode waves  

SciTech Connect (OSTI)

We carried out a series of particle simulations to study electron acceleration by Z-mode and whistler-mode waves generated by an electron ring distribution. The electron ring distribution leads to excitations of X-mode waves mainly in the perpendicular direction, Z-mode waves in the perpendicular and parallel directions, and whistler-mode waves mainly in the parallel direction. The parallel Z- and whistler-mode waves can lead to an effective acceleration of ring electrons. The electron acceleration is mainly determined by the wave amplitude and phase velocity, which in turn is affected by the ratio of electron plasma to cyclotron frequencies. For the initial kinetic energy ranging from 100 to 500 keV, the peak energy of the accelerated electrons is found to reach 2–8 times the initial kinetic energy. We further study the acceleration process by test-particle calculations in which electrons interact with one, two, or four waves. The electron trajectories in the one-wave case are simple diffusion curves. In the multi-wave cases, electrons are accelerated simultaneously by counter-propagating waves and can have a higher final energy.

Lee, K. H. [Institute of Space Science, National Central University, Zhongli, Taiwan (China)] [Institute of Space Science, National Central University, Zhongli, Taiwan (China); Omura, Y. [Research Institute for Sustainable Humanosphere, Kyoto University, Uji, Kyoto (Japan)] [Research Institute for Sustainable Humanosphere, Kyoto University, Uji, Kyoto (Japan); Lee, L. C. [Institute of Space Science, National Central University, Zhongli, Taiwan (China) [Institute of Space Science, National Central University, Zhongli, Taiwan (China); Institute of Earth Science, Academia Sinica, Nankang, Taiwan (China)

2013-11-15T23:59:59.000Z

349

Phase modulation mode of scanning ion conductance microscopy  

SciTech Connect (OSTI)

This Letter reports a phase modulation (PM) mode of scanning ion conductance microscopy. In this mode, an AC current is directly generated by an AC voltage between the electrodes. The portion of the AC current in phase with the AC voltage, which is the current through the resistance path, is modulated by the tip-sample distance. It can be used as the input of feedback control to drive the scanner in Z direction. The PM mode, taking the advantages of both DC mode and traditional AC mode, is less prone to electronic noise and DC drift but maintains high scanning speed. The effectiveness of the PM mode has been proven by experiments.

Li, Peng; Zhang, Changlin [State Key Laboratory of Robotics, Shenyang Institute of Automation, Chinese Academy of Sciences, Shenyang 110016 (China); University of Chinese Academy of Sciences, Beijing 100049 (China); Liu, Lianqing, E-mail: lqliu@sia.cn, E-mail: gli@engr.pitt.edu; Wang, Yuechao; Yang, Yang [State Key Laboratory of Robotics, Shenyang Institute of Automation, Chinese Academy of Sciences, Shenyang 110016 (China); Li, Guangyong, E-mail: lqliu@sia.cn, E-mail: gli@engr.pitt.edu [Department of Electrical and Computer Engineering, University of Pittsburgh, Pittsburgh, Pennsylvania 15261 (United States)

2014-08-04T23:59:59.000Z

350

Geodesic stability, Lyapunov exponents and quasinormal modes  

E-Print Network [OSTI]

Geodesic motion determines important features of spacetimes. Null unstable geodesics are closely related to the appearance of compact objects to external observers and have been associated with the characteristic modes of black holes. By computing the Lyapunov exponent, which is the inverse of the instability timescale associated with this geodesic motion, we show that, in the eikonal limit, quasinormal modes of black holes in any dimensions are determined by the parameters of the circular null geodesics. This result is independent of the field equations and only assumes a stationary, spherically symmetric and asymptotically flat line element, but it does not seem to be easily extendable to anti-de Sitter spacetimes. We further show that (i) in spacetime dimensions greater than four, equatorial circular timelike geodesics in a Myers-Perry black hole background are unstable, and (ii) the instability timescale of equatorial null geodesics in Myers-Perry spacetimes has a local minimum for spacetimes of dimension d > 5.

Vitor Cardoso; Alex S. Miranda; Emanuele Berti; Helvi Witek; Vilson T. Zanchin

2009-03-12T23:59:59.000Z

351

ITER L-Mode Confinement Database  

SciTech Connect (OSTI)

This paper describes the content of an L-mode database that has been compiled with data from Alcator C-Mod, ASDEX, DIII, DIII-D, FTU, JET, JFT-2M, JT-60, PBX-M, PDX, T-10, TEXTOR, TFTR, and Tore-Supra. The database consists of a total of 2938 entries, 1881 of which are in the L-phase while 922 are ohmically heated (OH) only. Each entry contains up to 95 descriptive parameters, including global and kinetic information, machine conditioning, and configuration. The paper presents a description of the database and the variables contained therein, and it also presents global and thermal scalings along with predictions for ITER. The L-mode thermal confinement time scaling was determined from a subset of 1312 entries for which the thermal confinement time scaling was provided.

S.M. Kaye and the ITER Confinement Database Working Group

1997-10-01T23:59:59.000Z

352

Tensor modes on the string theory landscape  

E-Print Network [OSTI]

We attempt an estimate for the distribution of the tensor mode fraction $r$ over the landscape of vacua in string theory. The dynamics of eternal inflation and quantum tunneling lead to a kind of democracy on the landscape, providing no bias towards large-field or small-field inflation regardless of the class of measure. The tensor mode fraction then follows the number frequency distributions of inflationary mechanisms of string theory over the landscape. We show that an estimate of the relative number frequencies for small-field vs large-field inflation, while unattainable on the whole landscape, may be within reach as a regional answer for warped Calabi-Yau flux compactifications of type IIB string theory.

Alexander Westphal

2012-12-22T23:59:59.000Z

353

Disordered Optical Modes for Photon Management  

E-Print Network [OSTI]

Wave transport in disordered systems is a vast research topic, ranging from electrons in semiconductors, to light in random dielectrics, to cold atoms in laser speckles. In optics, light transport is conveyed by random electromagnetic modes and the wave can be localized about a point or extended throughout the system, depending on disorder strength, structural correlations and dimensionality of the system. Light localization phenomena are more dominantly present in two-dimensional systems than in three-dimensional ones and their optical modes can be tailored to a greater extent. Here, we show that it is possible to make use of the properties of lower-dimensional disordered structures to obtain photon management in three-dimensional space. More particularly, we argue that two-dimensional disorder and wave interferences can be exploited to improve the performance of light absorbers or emitters. Our findings have direct applications for enhancing the absorption efficiency of third-generation solar cells in a rel...

Vynck, Kevin; Riboli, Francesco; Wiersma, Diederik S

2012-01-01T23:59:59.000Z

354

Integrated simulation of plasma surface interaction during edge localized modes and disruptions: Self-consistent approach  

E-Print Network [OSTI]

that are transported during ELMs to the divertor surface. ELMs, therefore, can result in excessive divertor erosion, lithium, and neon in multidimensional geometry to inte- grate core, SOL parameters, and divertor surface-like devices during an ELM can then increase from %5 MW/m2 to %300­3000 MW/m2 . The erosion losses of divertor

Harilal, S. S.

355

Design and Implementation of Switching Voltage Integrated Circuits Based on Sliding Mode Control  

E-Print Network [OSTI]

: : : : : : 29 xv FIGURE Page 16 Sine-exponential-shaped pulse-width modulation : : : : : : : : : : : : : 30 17 Family of exponential-shaped waveforms for different values of Ne : : : : 31 18 Total harmonic distortion of class D amplifier for different..., and their present and future market distribution. Moreover, the harmonic distortion of open-loop class D amplifiers based on pulse-width modulation (PWM) is analyzed by applying the duty cycle variation technique for the most popular carrier waveforms giving an easy...

Rojas Gonzalez, Miguel Angel

2010-10-12T23:59:59.000Z

356

Engineering integrated pure narrow-band photon sources  

E-Print Network [OSTI]

Engineering and controlling well defined states of light for quantum information applications is of increasing importance as the complexity of quantum systems grows. For example, in quantum networks high multi-photon interference visibility requires properly devised single mode sources. In this paper we propose a spontaneous parametric down conversion source based on an integrated cavity-waveguide, where single narrow-band, possibly distinct, spectral modes for the idler and the signal fields can be generated. This mode selection takes advantage of the clustering effect, due to the intrinsic dispersion of the nonlinear material. In combination with a CW laser and fast detection, our approach provides a means to engineer a source that can efficiently generate pure photons, without filtering, that is compatible with long distance quantum communication. Furthermore, it is extremely flexible and could easily be adapted to a wide variety of wavelengths and applications.

Enrico Pomarico; Bruno Sanguinetti; Clara I. Osorio; Harald Herrmann; Rob Thew

2011-08-29T23:59:59.000Z

357

Stabilizing windings for tilting and shifting modes  

DOE Patents [OSTI]

This invention relates to passive conducting loops for stabilizing a plasma ring against unstable tilting and/or shifting modes. To this end, for example, plasma ring in a spheromak is stabilized by a set of four figure-8 shaped loops having one pair on one side of the plasma and one pair on the other side with each pair comprising two loops whose axes are transverse to each other.

Jardin, Stephen C. (Princeton, NJ); Christensen, Uffe R. (Princeton, NJ)

1984-01-01T23:59:59.000Z

358

Light plasmon mode in the CFL phase  

E-Print Network [OSTI]

The self-energies and the spectral densities of longitudinal and transverse gluons at zero temperature in the color-flavor-locked (CFL) phase are calculated. There appears a collective excitation, a light plasmon, at energies smaller than two times the gap parameter and momenta smaller than about eight times the gap. The minimum in the dispersion relation of this mode at some nonzero value of momentum corresponds to the van Hove singularity.

Malekzadeh, H; Rischke, Dirk H.

2007-01-01T23:59:59.000Z

359

Light plasmon mode in the CFL phase  

E-Print Network [OSTI]

The self-energies and the spectral densities of longitudinal and transverse gluons at zero temperature in the color-flavor-locked (CFL) phase are calculated. There appears a collective excitation, a light plasmon, at energies smaller than two times the gap parameter and momenta smaller than about eight times the gap. The minimum in the dispersion relation of this mode at some nonzero value of momentum corresponds to the van Hove singularity.

H. Malekzadeh; Dirk H. Rischke

2006-11-10T23:59:59.000Z

360

Compression mode resonances in Zr-90  

E-Print Network [OSTI]

Compression mode resonances in 90Zr D. H. Youngblood, Y.-W. Lui, B. John,* Y. Tokimoto, H. L. Clark, and X. Chen Cyclotron Institute, Texas A&M University, College Station, Texas 77843, USA (Received 18 February 2004; published 20 May 2004..., JOHN, TOKIMOTO, CLARK, AND CHEN PHYSICAL REVIEW C 69, 054312 (2004) 054312-2 Fig. 2. The continuum distributions are similar over the en- tire energy range, whereas the angular distributions of the cross sections for the peak change...

Youngblood, David H.; Lui, YW; John, B.; Tokimoto, Y.; Clark, HL; Chen, X.

2004-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "integration mode reference" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

The Burst Mode of Protostellar Accretion  

E-Print Network [OSTI]

We present new numerical simulations in the thin-disk approximation which characterize the burst mode of protostellar accretion. The burst mode begins upon the formation of a centrifugally balanced disk around a newly formed protostar. It is comprised of prolonged quiescent periods of low accretion rate (typically $\\la 10^{-7} \\Msun$ yr$^{-1}$) which are punctuated by intense bursts of accretion (typically $\\ga 10^{-4} \\Msun$ yr$^{-1}$, with duration $\\la 100$ yr) during which most of the protostellar mass is accumulated. The accretion bursts are associated with the formation of dense protostellar/protoplanetary embryos, which are later driven onto the protostar by the gravitational torques that develop in the disk. Gravitational instability in the disk, driven by continuing infall from the envelope, is shown to be an effective means of transporting angular momentum outward, and mass inward to the protostar. We show that the disk mass always remains significantly less than the central protostar mass throughout this process. The burst phenomenon is robust enough to occur for a variety of initial values of rotation rate, frozen-in (supercritical) magnetic field, and density-temperature relations. Even in cases where the bursts are nearly entirely suppressed, a moderate increase in cloud size or rotation rate can lead to vigorous burst activity. We conclude that most (if not all) protostars undergo a burst mode of evolution during their early accretion history, as inferred empirically from observations of FU Orionis variables.

E. I. Vorobyov; Shantanu Basu

2006-07-06T23:59:59.000Z

362

PEV Integration with Renewables (Presentation)  

SciTech Connect (OSTI)

This presentation discusses current research at NREL on integrating plug-in electric vehicles with the grid and using renewable energy to charge the grid. The Electric Vehicle Grid Integration (EVGI) and Integrated Network Testbed for Energy Grid Research and Technology Experimentation (INTEGRATE) are addressing the opportunities and technical requirements for vehicle grid integration that will increase marketability and lead to greater petroleum reduction.

Markel, T.

2014-06-18T23:59:59.000Z

363

Integrated Energy Efficiency  

E-Print Network [OSTI]

10 Off The Grid Sensor Integration Natural Daylight Base and Peak Energy Reduction 11 Lowest Cost Renewable Solar Integrated Lighting $1.0 million/MW $6 – 9 million/MW Wind $1.3 - 1.9 million/MW Biomass $1.5 – 2.5 million/MW Geothermal $1.6 million...Integrated Energy Efficiency Steve Heins VP Communications and Government Affairs Orion Energy Systems, Inc. 2 MegaTrend Convergence We need companies to commercialize technologies that use less energy without compromise to operations. Energy...

Heins, S.

364

Terahertz bandwidth integrated radio frequency spectrum analyzer via nonlinear optics  

E-Print Network [OSTI]

We report an integrated all-optical radio frequency spectrum analyzer based on a ~ 4cm long doped silica glass waveguide, with a bandwidth greater than 2.5 THz. We use this device to characterize the intensity power spectrum of ultrahigh repetition rate mode-locked lasers at repetition rates up to 400 GHz, and observe dynamic noise related behavior not observable with other techniques.

Ferrera, Marcello; Pasquazi, Alessia; Peccianti, Marco; Clerici, Matteo; Caspani, Lucia; Chu, Sai T; Little, Brent E; Morandotti, Roberto; Moss, David J

2014-01-01T23:59:59.000Z

365

Zero Net Energy Myths and Modes of Thought  

E-Print Network [OSTI]

mypp.html. ———. (2009). "Net-Zero Energy CommercialZero Net Energy Myths and Modes of Thought  Nicholas B.  AC02? 05CH11231. Page | i Zero Net Energy Myths and Modes of

Rajkovich, Nicholas B.

2010-01-01T23:59:59.000Z

366

Acoustic modes in combustors with complex impedances and multidimensional active  

E-Print Network [OSTI]

Acoustic modes in combustors with complex impedances and multidimensional active flames F. Nicoud-acoustic modes in combustors. In the case of a non-isothermal reacting medium, the wave equation for the pressure

Paris-Sud XI, Université de

367

acoustic mode frequencies: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

simulations were then compared to the number of p-modes candidates observed in real Sun-as-a-star data at low frequencies. The fraction of simulated spectra in which modes...

368

Diagnostic for two-mode variable valve activation device  

DOE Patents [OSTI]

A method is provided for diagnosing a multi-mode valve train device which selectively provides high lift and low lift to a combustion valve of an internal combustion engine having a camshaft phaser actuated by an electric motor. The method includes applying a variable electric current to the electric motor to achieve a desired camshaft phaser operational mode and commanding the multi-mode valve train device to a desired valve train device operational mode selected from a high lift mode and a low lift mode. The method also includes monitoring the variable electric current and calculating a first characteristic of the parameter. The method also includes comparing the calculated first characteristic against a predetermined value of the first characteristic measured when the multi-mode valve train device is known to be in the desired valve train device operational mode.

Fedewa, Andrew M

2014-01-07T23:59:59.000Z

369

Plutonium Certified Reference Materials Price List | U.S. DOE...  

Office of Science (SC) Website

Reference Materials (CRM) Contact Information New Brunswick Laboratory U.S. Department of Energy Building 350 9800 South Cass Avenue Argonne, IL 60439-4899 P: (630) 252-2442 (NBL)...

370

Using graphical representation of user interfaces as visual references  

E-Print Network [OSTI]

My thesis investigates using a graphical representation of user interfaces - screenshots - as a direct visual reference to support various kinds of applications. We have built several systems to demonstrate and validate ...

Zhang, Zongxiang

2012-01-01T23:59:59.000Z

371

Quantum geometrodynamical description of the Universe in different reference frames  

E-Print Network [OSTI]

Several years ago the so-called quantum geometrodynamics in extended phase space was proposed. The main role in this version of quantum geometrodynamics is given to a wave function that carries information about geometry of the Universe as well as about a reference frame in which this geometry is studied. We consider the evolution of a physical object (the Universe) in ``physical'' subspace of extended configurational space, the latter including gauge and ghost degrees of freedom. A measure of the ``physical'' subspace depends on a chosen reference frame, in particular, a small variation of a gauge-fixing function results in changing the measure. Thus, a transition to another gauge condition (another reference frame) leads to non-unitary transformation of a physical part of the wave function. From the viewpoint of the evolution of the Universe in the ``physical'' subspace a transition to another reference frame is an irreversible process that may be important when spacetime manifold has a nontrivial topology.

T. P. Shestakova

2002-05-16T23:59:59.000Z

372

Nuclear Science References Coding Manual D.F. Winchell  

E-Print Network [OSTI]

Nuclear Science References Coding Manual D.F. Winchell National Nuclear Data Center Brookhaven and coding procedures for specific topics . . 18 3.2.1 NUCLEAR REACTIONS . . . . . . . . . . . . . . . . 19 3.2.2 RADIOACTIVITY . . . . . . . . . . . . . . . . . . . . 20 3.2.3 NUCLEAR STRUCTURE

Ohta, Shigemi

373

Archive Reference Buildings by Building Type: Large office  

Office of Energy Efficiency and Renewable Energy (EERE)

Here you will find past versions of the reference buildings for new construction commercial buildings, organized by building type and location. A summary of building types and climate zones is...

374

Reference Buildings by Climate Zone and Representative City:...  

Broader source: Energy.gov (indexed) [DOE]

1A Miami, Florida Reference Buildings by Climate Zone and Representative City: 1A Miami, Florida In addition to the ZIP file for each building type, you can directly view the...

375

Reference Buildings by Climate Zone and Representative City:...  

Broader source: Energy.gov (indexed) [DOE]

B Boulder, Colorado Reference Buildings by Climate Zone and Representative City: 5B Boulder, Colorado In addition to the ZIP file for each building type, you can directly view the...

376

Reference Buildings by Climate Zone and Representative City:...  

Broader source: Energy.gov (indexed) [DOE]

A Chicago, Illinois Reference Buildings by Climate Zone and Representative City: 5A Chicago, Illinois In addition to the ZIP file for each building type, you can directly view the...

377

Reference Buildings by Climate Zone and Representative City:...  

Broader source: Energy.gov (indexed) [DOE]

B Phoenix, Arizona Reference Buildings by Climate Zone and Representative City: 2B Phoenix, Arizona In addition to the ZIP file for each building type, you can directly view the...

378

Reference Buildings by Climate Zone and Representative City:...  

Broader source: Energy.gov (indexed) [DOE]

7 Duluth, Minnesota Reference Buildings by Climate Zone and Representative City: 7 Duluth, Minnesota In addition to the ZIP file for each building type, you can directly view the...

379

Reference Buildings by Climate Zone and Representative City:...  

Broader source: Energy.gov (indexed) [DOE]

A Baltimore, Maryland Reference Buildings by Climate Zone and Representative City: 4A Baltimore, Maryland In addition to the ZIP file for each building type, you can directly view...

380

Reference Buildings by Climate Zone and Representative City:...  

Broader source: Energy.gov (indexed) [DOE]

C Seattle, Washington Reference Buildings by Climate Zone and Representative City: 4C Seattle, Washington In addition to the ZIP file for each building type, you can directly view...

Note: This page contains sample records for the topic "integration mode reference" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Reference Buildings by Climate Zone and Representative City:...  

Broader source: Energy.gov (indexed) [DOE]

A Atlanta, Georgia Reference Buildings by Climate Zone and Representative City: 3A Atlanta, Georgia In addition to the ZIP file for each building type, you can directly view the...

382

Reference Buildings by Climate Zone and Representative City:...  

Broader source: Energy.gov (indexed) [DOE]

8 Fairbanks, Alaska Reference Buildings by Climate Zone and Representative City: 8 Fairbanks, Alaska In addition to the ZIP file for each building type, you can directly view the...

383

Reference Buildings by Climate Zone and Representative City:...  

Broader source: Energy.gov (indexed) [DOE]

B Las Vegas, Nevada Reference Buildings by Climate Zone and Representative City: 3B Las Vegas, Nevada In addition to the ZIP file for each building type, you can directly view the...

384

Reference Buildings by Climate Zone and Representative City:...  

Broader source: Energy.gov (indexed) [DOE]

A Houston, Texas Reference Buildings by Climate Zone and Representative City: 2A Houston, Texas In addition to the ZIP file for each building type, you can directly view the...

385

Reference Buildings by Climate Zone and Representative City:...  

Broader source: Energy.gov (indexed) [DOE]

B Helena, Montana Reference Buildings by Climate Zone and Representative City: 6B Helena, Montana In addition to the ZIP file for each building type, you can directly view the...

386

Reference Buildings by Climate Zone and Representative City:...  

Broader source: Energy.gov (indexed) [DOE]

C San Francisco, California Reference Buildings by Climate Zone and Representative City: 3C San Francisco, California In addition to the ZIP file for each building type, you can...

387

Reference Buildings by Climate Zone and Representative City:...  

Broader source: Energy.gov (indexed) [DOE]

B Los Angeles, California Reference Buildings by Climate Zone and Representative City: 3B Los Angeles, California In addition to the ZIP file for each building type, you can...

388

Archive Reference Buildings by Building Type: Strip mall  

Broader source: Energy.gov [DOE]

Here you will find past versions of the reference buildings for new construction commercial buildings, organized by building type and location. A summary of building types and climate zones is...

389

Archive Reference Buildings by Building Type: Stand-alone retail  

Broader source: Energy.gov [DOE]

Here you will find past versions of the reference buildings for new construction commercial buildings, organized by building type and location. A summary of building types and climate zones is...

390

Archive Reference Buildings by Building Type: Small office  

Broader source: Energy.gov [DOE]

Here you will find past versions of the reference buildings for new construction commercial buildings, organized by building type and location. A summary of building types and climate zones is...

391

Archive Reference Buildings by Building Type: Primary school  

Broader source: Energy.gov [DOE]

Here you will find past versions of the reference buildings for new construction commercial buildings, organized by building type and location. A summary of building types and climate zones is...

392

Archive Reference Buildings by Building Type: Fast food  

Broader source: Energy.gov [DOE]

Here you will find past versions of the reference buildings for new construction commercial buildings, organized by building type and location. A summary of building types and climate zones is...

393

Archive Reference Buildings by Building Type: Secondary school  

Broader source: Energy.gov [DOE]

Here you will find past versions of the reference buildings for new construction commercial buildings, organized by building type and location. A summary of building types and climate zones is...

394

Naming, Reference, and Sense: Theoretical and Practical Attitudes at Odds  

E-Print Network [OSTI]

Naming, Reference, and Sense: Theoretical and Practical Attitudes at Odds ANDREW NORMAN Northwestern University Three questions lie at the center of the philosophical controversy over proper names: 1) Do proper names have a sense? 2) If so...

Norman, Andrew

395

Synergies in learning words and their referents Mark Johnson  

E-Print Network [OSTI]

Synergies in learning words and their referents Mark Johnson Department of Computing Macquarie University Sydney, NSW 2109 Mark.Johnson@mq.edu.au Katherine Demuth Department of Linguistics Macquarie

Edinburgh, University of

396

FERPA Reference Sheet for Office Personnel REGISTRAR'S OFFICE  

E-Print Network [OSTI]

(refer such to the General Counsel's Office) Respondents to a health or safety emergency (first contact interprets FERPA) recommends that you avoid including personally identifiable information (e.g., the Social

Franco, John

397

Annual Energy Outlook 2013 Early Release Reference Case  

Gasoline and Diesel Fuel Update (EIA)

projected in the AEO2012 Reference case * All renewable fuels grow, but biomass and biofuels growth is slower than in AEO2012 * U.S. energy-related carbon dioxide emissions...

398

academic reference works: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

to Get References into RefWorks Engineering Websites Summary: time. Type in your search terms. 5. Import from a text file. This method works for some onlineWorks function is...

399

advisory committee references: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AM in the Gemini O'Toole, Alice J. 8 ADVISORY COMMITTEE on PRESIDENTIAL SEARCH (ACoPS) TERMS OF REFERENCE Physics Websites Summary: and abide by the terms of this document as...

400

For historical reference Current Title 24 Standards are available at  

E-Print Network [OSTI]

Cooling with Outdoor Air ..... Electric Resistance Heating Systems Power Consumption of Fans ... MaximumFor historical reference Current Title 24 Standards are available at: http . Design Conditions and Calculations of Energy Consumption . Compliance Approaches . Page 15 20 29 29

Note: This page contains sample records for the topic "integration mode reference" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Reference Buildings by Climate Zone and Representative City:...  

Broader source: Energy.gov (indexed) [DOE]

B Albuquerque, New Mexico Reference Buildings by Climate Zone and Representative City: 4B Albuquerque, New Mexico In addition to the ZIP file for each building type, you can...

402

Wellbore Integrity Network  

SciTech Connect (OSTI)

In this presentation, we review the current state of knowledge on wellbore integrity as developed in the IEA Greenhouse Gas Programme's Wellbore Integrity Network. Wells are one of the primary risks to the successful implementation of CO{sub 2} storage programs. Experimental studies show that wellbore materials react with CO{sub 2} (carbonation of cement and corrosion of steel) but the impact on zonal isolation is unclear. Field studies of wells in CO{sub 2}-bearing fields show that CO{sub 2} does migrate external to casing. However, rates and amounts of CO{sub 2} have not been quantified. At the decade time scale, wellbore integrity is driven by construction quality and geomechanical processes. Over longer time-scales (> 100 years), chemical processes (cement degradation and corrosion) become more important, but competing geomechanical processes may preserve wellbore integrity.

Carey, James W. [Los Alamos National Laboratory; Bachu, Stefan [Alberta Innovates

2012-06-21T23:59:59.000Z

403

SOLAR PROGRAM: SYSTEMS INTEGRATION  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

2010 2. Current Request for Information (RFI) 3. Questions 4 | Systems Integration eere.energy.gov Summary of 1W Workshop Date: August 11th and 12th, 2010 Attendees: 86 total;...

404

Power Supply Changes for NSTX Resistive Wall Mode Coils  

SciTech Connect (OSTI)

The National Spherical Torus Experiment (NSTX) has been designed and installed in the existing facilities at Princeton Plasma Physics Laboratory (PPPL). Most of the hardware, plant facilities, auxiliary sub-systems, and power systems originally used for the Tokamak Fusion Test Reactor (TFTR) have been used with suitable modifications to reflect NSTX needs. Prior to 2004, the NSTX power system was feeding twelve (12) circuits in the machine. In 2004 the Resistive Wall Mode (RWM) Coils were installed on the machine to correct error fields. There are six of these coils installed around the machine in the mid-plane. Since these coils need fast and accurate controls, a Switching Power Amplifier (SPA) with three sub-units was procured, installed and commissioned along with other power loop components. Two RWM Coils were connected in series and fed from one SPA sub-unit. After the initial RWM campaign, operational requirements evolved such that each of the RWM coils now requires separate power and control. Hence a second SPA with three sub-units has been procured and installed. The second unit is of improved design and has the controls and power components completely isolated. The existing thyristor rectifier is used as DC Link to both of the Switching Power Amplifiers. The controls for the RWM are integrated into the overall computer control of the DC Power systems for NSTX. This paper describes the design changes in the RWM Power system for NSTX.

Ramakrishnan, S S.

2013-06-28T23:59:59.000Z

405

IDC Integrated Master Plan.  

SciTech Connect (OSTI)

This is the IDC Re-Engineering Phase 2 project Integrated Master Plan (IMP). The IMP presents the major accomplishments planned over time to re-engineer the IDC system. The IMP and the associate Integrated Master Schedule (IMS) are used for planning, scheduling, executing, and tracking the project technical work efforts. REVISIONS Version Date Author/Team Revision Description Authorized by V1.0 12/2014 IDC Re- engineering Project Team Initial delivery M. Harris

Clifford, David J.; Harris, James M.

2014-12-01T23:59:59.000Z

406

Extracting Operating Modes from Building Electrical Load Data: Preprint  

SciTech Connect (OSTI)

Empirical techniques for characterizing electrical energy use now play a key role in reducing electricity consumption, particularly miscellaneous electrical loads, in buildings. Identifying device operating modes (mode extraction) creates a better understanding of both device and system behaviors. Using clustering to extract operating modes from electrical load data can provide valuable insights into device behavior and identify opportunities for energy savings. We present a fast and effective heuristic clustering method to identify and extract operating modes in electrical load data.

Frank, S.; Polese, L. G.; Rader, E.; Sheppy, M.; Smith, J.

2012-01-01T23:59:59.000Z

407

Viscoelastic modes in a strongly coupled, cold, magnetized dusty plasma  

SciTech Connect (OSTI)

A generalized hydrodynamical model has been used to study the low frequency modes in a strongly coupled, cold, magnetized dusty plasma. Such plasmas exhibit elastic properties due to the strong correlations among dust particles and the tensile stresses imparted by the magnetic field. It has been shown that longitudinal compressional Alfven modes and elasticity modified transverse shear mode exist in such a medium. The features of these collective modes are established and discussed.

Banerjee, Debabrata; Mylavarapu, Janaki Sita; Chakrabarti, Nikhil [Saha Institute of Nuclear Physics, I/AF Bidhannagar, Calcutta 700 064 (India)

2010-11-15T23:59:59.000Z

408

The Influence of Topology Changes on Inter-area Oscillation Modes and Mode Shapes  

SciTech Connect (OSTI)

The topology of a power grid network is a piece of critical information for power grid operations. Different power grid topologies can change grid characteristics, inter-area oscillation modes, mode shapes, and even the robustness of the power system. This paper presents some preliminary study results, based on an approved WECC operating case and a modified low damping WECC system, to show the impact of topology changes resulting from N-1 contingencies on power system modes and mode shapes. The results show that topology changes can have very different impact on modal properties in a power system: some result in unstable situation, while others can improve small signal stability. For the former, the studies show about 4.5% damping reduction, so 5% damping margin would be required to ensure the system can sustain the contingencies. For the latter, those topology changes could be used as a control method to improve small signal stability. Mode shapes normally do not change when there is an N-1 topology change. These observations suggest that the inclusion of topological information is useful for improving the accuracy and effectiveness of power system control schemes.

Chen, Yousu; Fuller, Jason C.; Diao, Ruisheng; Zhou, Ning; Huang, Zhenyu; Tuffner, Francis K.

2011-10-17T23:59:59.000Z

409

Newton-Cartan Gravity in Noninertial Reference Frames  

E-Print Network [OSTI]

We study properties of Newton-Cartan gravity under transformations into all noninertial, nonrelativistic reference frames. The set of these transformations has the structure of an infinite dimensional Lie group, called the Galilean line group, which contains as a subgroup the Galilei group. We show that the fictitious forces of noninertial reference frames are naturally encoded in the Cartan connection transformed under the Galilean line group. These noninertial forces, which are coordinate effects, do not contribute to the Ricci tensor which describes the curvature of Newtonian spacetime. We show that only the $00$-component of the Ricci tensor is non-zero and equal to ($4\\pi$ times) the matter density in any inertial or noninetial reference frame and that it leads to what may be called Newtonian ADM mass. While the Ricci field equation and Gauss law are both fulfilled by the same physical matter density in inertial and linearly accelerating reference frames, there appears a discrepancy between the two in rotating reference frames in that Gauss law holds for an effective mass density that differs from the physical matter density. This effective density has its origin in the simulated magnetic field that appears in rotating frames, highlighting a rather striking difference between linearly and rotationally accelerating reference frames. We further show that the dynamical equations that govern the simulated gravitational and magnetic fields have the same form as Maxwell's equations, a surprising conclusion given that these equations are well-known to obey special relativity (and $U(1)$-gauge symmetry), rather than Galilean symmetry.

Leo Rodriguez; James St. Germaine-Fuller; Sujeev Wickramasekara

2014-12-26T23:59:59.000Z

410

Transportation Mode Detection using Mobile Phones and GIS Information  

E-Print Network [OSTI]

Transportation Mode Detection using Mobile Phones and GIS Information Leon Stenneth, Ouri Wolfson, Chicago, IL 60607-7053 {lstennet, wolfson, psyu, boxu} @cs.uic.edu ABSTRACT The transportation mode. In this paper, we propose an approach to inferring a user's mode of transportation based on the GPS sensor

Wolfson, Ouri E.

411

Stability Properties of Toroidal Alfvn Modes Driven by Fast Particles  

E-Print Network [OSTI]

of a strong drive, TAEs will be strongly modi#28;ed to new types of mode, the Resonant TAE[8] or Energetic #12; which is able to resolve new resonant branches of the toroidal Alfvén modes called resonant TAE, such as DIII-D at General Atomics [3]. A new type of chirping frequency modes was re- ported in spherical

412

The Integrated Airport: Building a Successful NextGen Testbed  

ScienceCinema (OSTI)

This presentation will describe a unique public-private partnership - the Integrated Airport - that was created to engage in research and testing related to NextGen Technology deployment.  NextGen refers to the program that will be initiated to modernize the US National Airspace.  As with any major, multi-decade initiative, such as NextGen, integration of work efforts by multiple partners in the modernization is critical for success.  This talk will focus on the development of the consortium, how the consortium plans for NextGen initiatives, the series of technology demonstrations we have produced and plans for the future of NextGen testing and implementation. 

Christina Frederick-Recascino

2010-01-08T23:59:59.000Z

413

Integrating farming and wastewater management.  

E-Print Network [OSTI]

??Source separating wastewater systems are often motivated by their integration with farming. It is thus important to scrutinise the critical factors associated with such integration.… (more)

Tidĺker, Pernilla

2007-01-01T23:59:59.000Z

414

Systems Integration | Department of Energy  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Systems Integration Systems Integration Through the SunShot Initiative, the U.S. Department of Energy (DOE) supports the development of innovative, cost-effective solutions that...

415

Systems Integration | ornl.gov  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Systems Integration SHARE Systems Integration The Distributed Energy Communications and Controls (DECC) Laboratory offers a unique test bed for testing distributed energy...

416

Observation of pedestal turbulence in edge localized mode-free H-mode on experimental advanced superconducting tokamak  

SciTech Connect (OSTI)

Two different pedestal turbulence structures have been observed in edge localized mode-free phase of H-mode heated by lower hybrid wave and RF wave in ion cyclotron range of frequencies (ICRF) on experimental advanced superconducting tokamak. When the fraction of ICRF power P{sub ICRF}/P{sub total} exceeds 0.7, coherent mode is observed. The mode is identified as an electromagnetic mode, rotating in electron diamagnetic direction with a frequency around 50 kHz and toroidal mode number n?=??3. Whereas when P{sub ICRF}/P{sub total} is less than 0.7, harmonic mode with frequency f?=?40–300 kHz appears instead. The characteristics of these two modes are demonstrated preliminarily. The threshold value of heating power and also the plasma parameters are distinct.

Han, X., E-mail: hanx@ipp.ac.cn; Zhang, T.; Zhang, S. B.; Wang, Y. M.; Shi, T. H.; Liu, Z. X.; Kong, D. F.; Qu, H.; Gao, X. [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui 230031 (China)

2014-10-15T23:59:59.000Z

417

Transportation and Stationary Power Integration: Workshop Proceedings...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Integration: Workshop Proceedings Transportation and Stationary Power Integration: Workshop Proceedings Proceedings for the Transportation and Stationary Power Integration Workshop...

418

Inflation, Symmetry, and B-Modes  

E-Print Network [OSTI]

We examine the role of using symmetry and effective field theory in inflationary model building. We describe the standard formulation of starting with an approximate shift symmetry for a scalar field, and then introducing corrections systematically in order to maintain control over the inflationary potential. We find that this leads to models in good agreement with recent data. On the other hand, there are attempts in the literature to deviate from this paradigm by envoking other symmetries and corrections. In particular: in a suite of recent papers, several authors have made the claim that standard Einstein gravity with a cosmological constant and a massless scalar carries conformal symmetry. They further claim that such a theory carries another hidden symmetry; a global SO(1,1) symmetry. By deforming around the global SO(1,1) symmetry, they are able to produce a range of inflationary models with asymptotically flat potentials, whose flatness is claimed to be protected by these symmetries. These models tend to give rise to B-modes with small amplitude. Here we explain that these authors are merely introducing a redundancy into the description, not an actual conformal symmetry. Furthermore, we explain that the only real (global) symmetry in these models is not at all hidden, but is completely manifest when expressed in the Einstein frame; it is in fact the shift symmetry of a scalar field. When analyzed systematically as an effective field theory, deformations do not generally produce asymptotically flat potentials and small B-modes, but other types of potentials with B-modes of large amplitude; nicely compatible with recent BICEP2 data. Such simple models typically also produce the observed red spectral index, Gaussian fluctuations, etc. In short: simple models of inflation, organized by expanding around a shift symmetry, are in excellent agreement with recent data.

Mark P. Hertzberg

2014-03-20T23:59:59.000Z

419

Integrating the Integrators - A Roadmap to Success  

SciTech Connect (OSTI)

The U.S. Department of Energy Environmental Management's (DOE-EM) investments in science and technology, as well as science and technology investments associated with other parts of the DOE are aimed at meeting the Departments cleanup goals. These investments, primarily focused on EM's cleanup mission, comprise the Environmental Quality Research and Development (R&D) portfolios. Synchronizing EM's Cleanup Project Managers (operations facility and process owners throughout the DOE complex) operational needs with EM R&D including the extensive work of the six Focus Areas (major thrust areas within DOE-EM) has been a continuing challenge. This recent initiative to better integrate the R&D program is in response to evolving needs within the Department to apply proven system engineering methods to clarify requirements and define EM's process to effectively orchestrate their R&D Program. To optimize this partnership, DOE-EM's Integration Program is successfully unifying the operational needs with the R&D as described in this paper.

Olson, Craig Stott; Conner, Craig C

1999-03-01T23:59:59.000Z

420

Integrating the Integrators - A Roadmap to Success  

SciTech Connect (OSTI)

The U.S. Department of Energy Environmental Management's (DOE-EM) investments in science and technology, as well as science and technology investments associated with other parts of the DOE are aimed at meeting the Departments cleanup goals. These investments, primarily focused on EM's cleanup mission, comprise the Environmental Quality Research and Development (R&D) portfolios. Synchronizing EM's Cleanup Project Managers (operations facility and process owners throughout the DOE complex) operational needs with EM R&D including the extensive work of the six Focus Areas (major thrust areas within DOE-EM) has been a continuing challenge. This recent initiative to better integrate the R&D program is in response to evolving needs within the Department to apply proven systems engineering methods to clarify requirements and define EM's process to effectively orchestrate their R&D Program. To optimize this partnership, DOE-EM's Integration Program is successfully unifying the operational needs with the R&D as described in this paper.

C. Conner; C. Olson

1999-02-01T23:59:59.000Z

Note: This page contains sample records for the topic "integration mode reference" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Shaft Siting and Configuration for Flexible Operating Mode  

SciTech Connect (OSTI)

The purpose of this document as stated in the ''Technical Work Plan for Subsurface Design Section FY 01 Work Activities'' (CRWMS M&O 2001a, pg. 14) is to review and evaluate the most current concepts for shaft siting and configuration. The locations of the shaft sites will be evaluated in reference to the overall subsurface ventilation layout shown in Figure 1. The scope will include discussions on pad size requirements, shaft construction components such as collars, shaft stations, sumps, ground support and linings, head frames, fan ducting and facility equipping. In addition to these, shaft excavation methodologies and integration with the overall subsurface construction schedule will be described. The Technical Work Plan (TWP), (CRWMS M&O 2001a), for this document has been prepared in accordance with AP-2.21Q, ''Quality Determinations and Planning for Scientific, Engineering and Regulatory Compliance Activities''. This document will be prepared in accordance with AP-3.10Q, ''Analysis and Models''. This document contributes to Site Recommendation (SR). The intended use of this document is to provide an analysis for shaft siting and configuration criteria for subsequent construction. This document identifies preliminary design concepts that should not be used for procurement, fabrication, or construction.

Robert Boutin

2001-08-02T23:59:59.000Z

422

NSTX Failure Modes & Effects Analysis / NSTX-FMEA-71-10 / p. 1 of 115 FAILURE MODES AND EFFECTS ANALYSIS  

E-Print Network [OSTI]

NSTX Failure Modes & Effects Analysis / NSTX-FMEA-71-10 / p. 1 of 115 NSTX FAILURE MODES AND EFFECTS ANALYSIS (FMEA) Revision 10 Dated: November 2014 Prepared By: Name/WBS Signature Name: ________________________________________________ Ron Strykowsky, NSTX Upgrade Project Manager #12;NSTX Failure Modes & Effects Analysis / NSTX-FMEA-71

Princeton Plasma Physics Laboratory

423

Integrated Baseline Bystem (IBS) Version 1.03: Models guide  

SciTech Connect (OSTI)

The Integrated Baseline System)(IBS), operated by the Federal Emergency Management Agency (FEMA), is a system of computerized tools for emergency planning and analysis. This document is the models guide for the IBS and explains how to use the emergency related computer models. This document provides information for the experienced system user, and is the primary reference for the computer modeling software supplied with the system. It is designed for emergency managers and planners, and others familiar with the concepts of computer modeling. Although the IBS manual set covers basic and advanced operations, it is not a complete reference document set. Emergency situation modeling software in the IBS is supported by additional technical documents. Some of the other IBS software is commercial software for which more complete documentation is available. The IBS manuals reference such documentation where necessary.

Not Available

1993-01-01T23:59:59.000Z

424

Integrated Micro Nano Systems Integrated Micro Nano Systems  

E-Print Network [OSTI]

#12;Integrated Micro Nano Systems 2 #12;Integrated Micro Nano Systems 3 Val Jones (Ed.) Symposium on Integrated Micro Nano Systems: Convergence of bio and nanotechnologies, Enschede, The Netherlands, June 2006 Micro Nano Systems 4 #12;Integrated Micro Nano Systems 5 Preface In order to explore the convergence

Al Hanbali, Ahmad

425

ELECTROSTATIC MODE ASSOCIATED WITH PINCH VELOCITY IN RFPS  

SciTech Connect (OSTI)

The existence of a new electrostatic instability is shown for RFP (reversed field pinch) equilibria. This mode arises due to the non-zero equilibrium radial flow (pinch flow). In RFP simulations with no-stress boundary conditions on the tangential velocity at the radial wall, this electrostatic mode is unstable and dominates the nonlinear dynamics, even in the presence of the MHD modes typically responsible for the reversal of the axial magnetic field at edge. Nonlinearly, this mode leads to two beams moving azimuthally towards each other, which eventually collide. The electrostatic mode can be controlled by using Dirichlet (no-slip) boundary conditions on the azimuthal velocity at the radial wall.

DELZANNO, GIAN LUCA [Los Alamos National Laboratory; FINN, JOHN M. [Los Alamos National Laboratory; CHACON, LUIS [Los Alamos National Laboratory

2007-02-08T23:59:59.000Z

426

Effect of Trapped Energetic Particles on the Resistive Wall Mode  

SciTech Connect (OSTI)

A stability analysis for the resistive wall mode is studied in the presence of trapped energetic particles (EPs). When the EPs' beta exceeds a critical value, a fishbonelike bursting mode (FLM) with an external kink eigenstructure can exist. This offers the first analytic interpretation of the experimental observations [Phys. Rev. Lett. 103, 045001 (2009)]. The mode-particle resonances for the FLM and the q=1 fishbone occur in different regimes of the precession frequency of EPs. In certain ranges of the plasma rotation speed and the EPs' beta, a mode conversion can occur between the resistive wall mode and FLM.

Hao, G. Z.; Wang, A. K.; Qiu, X. M. [Southwestern Institute of Physics, Post Office Box 432, Chengdu 610041 (China); Liu, Y. Q. [Euratom/CCFE Fusion Association, Culham Science Centre, Abingdon, Oxon OX14 3DB (United Kingdom)

2011-07-01T23:59:59.000Z

427

Second harmonic effect on geodesic modes in tokamak plasmas  

SciTech Connect (OSTI)

Results of a kinetic treatment of Geodesic Acoustic Modes (GAMs) that fully takes into account ion parallel dynamics, including the magnetic field component, are presented. The finite-orbit-width (FOW) parameter is considered in the calculation of the second harmonic effect on GAMs. For larger values of the FOW parameter, it is shown that dispersive effects related to the m = 2 harmonics is the cause of the mode frequency splitting and the modes appear due to the interaction with the ion sound mode. Furthermore, the modes may have enhanced damping rates due to second harmonic Landau damping.

Elfimov, A. G.; Galvăo, R. M. O. [Institute of Physics, University of Săo Paulo, Săo Paulo 05508-090 (Brazil)] [Institute of Physics, University of Săo Paulo, Săo Paulo 05508-090 (Brazil); Smolyakov, A. I. [University of Saskatchewan, 116 Science Place, Saskatoon S7N 5E2 (Canada) [University of Saskatchewan, 116 Science Place, Saskatoon S7N 5E2 (Canada); Institute of Tokamak Physics, NRC “Kurchatov Institute,” 123182 Moscow (Russian Federation); Melnikov, A. V. [Institute of Tokamak Physics, NRC “Kurchatov Institute,” 123182 Moscow (Russian Federation)] [Institute of Tokamak Physics, NRC “Kurchatov Institute,” 123182 Moscow (Russian Federation)

2013-05-15T23:59:59.000Z

428

Damping of unwanted modes in SRF deflecting/crabbing cavities  

SciTech Connect (OSTI)

As deflecting and crab cavities do not use the fundamental acceleration mode for their operation, the spectrum of unwanted modes is significantly different from that of accelerating cavities. The fundamental acceleration mode is now unwanted and can cause energy spread in the beam; in addition this mode frequency is often close to or lower than that of the deflecting mode, making it difficult to damp. This is made more complex in some of the compact crab cavities as there small beampipes often attenuate the fields very sharply. In addition in some crab cavities there can be an orthogonal transverse mode similar to the deflecting mode, known as the same order mode. The degeneracy of these modes must be split by polarising the cavity and if the polarisation is not large enough, dampers should be placed at either an electric or magnetic field null of the crabbing mode to effectively damp the unwanted polarisation. Various concepts for dealing with unwanted modes in various SRF deflecting cavities will be reviewed.

Burt, Graeme [University of Lancaster (United Kingdom); Wang, Haipeng [JLAB, Newport News, VA (United States)

2014-01-01T23:59:59.000Z

429

Multi-mode ultrasonic welding control and optimization  

DOE Patents [OSTI]

A system and method for providing multi-mode control of an ultrasonic welding system. In one embodiment, the control modes include the energy of the weld, the time of the welding process and the compression displacement of the parts being welded during the welding process. The method includes providing thresholds for each of the modes, and terminating the welding process after the threshold for each mode has been reached, the threshold for more than one mode has been reached or the threshold for one of the modes has been reached. The welding control can be either open-loop or closed-loop, where the open-loop process provides the mode thresholds and once one or more of those thresholds is reached the welding process is terminated. The closed-loop control provides feedback of the weld energy and/or the compression displacement so that the weld power and/or weld pressure can be increased or decreased accordingly.

Tang, Jason C.H.; Cai, Wayne W

2013-05-28T23:59:59.000Z

430

Search for invisible decays of Higgs bosons in the vector boson fusion and associated ZH production modes  

E-Print Network [OSTI]

A search for invisible decays of Higgs bosons is performed using the vector boson fusion and associated ZH production modes. In the ZH mode, the Z boson is required to decay to a pair of charged leptons or a b b-bar quark pair. The searches use the 8 TeV pp collision dataset collected by the CMS detector at the LHC, corresponding to an integrated luminosity of up to 19.7 inverse femtobarns. Certain channels include data from 7 TeV collisions corresponding to an integrated luminosity of 4.9 inverse femtobarns. The searches are sensitive to non-standard-model invisible decays of the recently observed Higgs boson, as well as additional Higgs bosons with similar production modes and large invisible branching fractions. In all channels, the observed data are consistent with the expected standard model backgrounds. Limits are set on the production cross section times invisible branching fraction, as a function of the Higgs boson mass, for the vector boson fusion and ZH production modes. By combining all channels, and assuming standard model Higgs boson cross sections and acceptances, the observed (expected) upper limit on the invisible branching fraction at m[H] = 125 GeV is found to be 0.58 (0.44) at 95% confidence level. We interpret this limit in terms of a Higgs-portal model of dark matter interactions.

CMS Collaboration

2014-08-20T23:59:59.000Z

431

Search for invisible decays of Higgs bosons in the vector boson fusion and associated ZH production modes  

SciTech Connect (OSTI)

A search for invisible decays of Higgs bosons is performed using the vector boson fusion and associated ZH production modes. In the ZH mode, the Z boson is required to decay to a pair of charged leptons or a b b-bar quark pair. The searches use the 8 TeV pp collision dataset collected by the CMS detector at the LHC, corresponding to an integrated luminosity of up to 19.7 inverse femtobarns. Certain channels include data from 7 TeV collisions corresponding to an integrated luminosity of 4.9 inverse femtobarns. The searches are sensitive to non-standard-model invisible decays of the recently observed Higgs boson, as well as additional Higgs bosons with similar production modes and large invisible branching fractions. In all channels, the observed data are consistent with the expected standard model backgrounds. Limits are set on the production cross section times invisible branching fraction, as a function of the Higgs boson mass, for the vector boson fusion and ZH production modes. By combining all channels, and assuming standard model Higgs boson cross sections and acceptances, the observed (expected) upper limit on the invisible branching fraction at m[H] = 125 GeV is found to be 0.58 (0.44) at 95% confidence level. We interpret this limit in terms of a Higgs-portal model of dark matter interactions.

Chatrchyan, Serguei; et. al,

2014-08-01T23:59:59.000Z

432

Twisted symmetries and integrable systems  

E-Print Network [OSTI]

Symmetry properties are at the basis of integrability. In recent years, it appeared that so called "twisted symmetries" are as effective as standard symmetries in many respects (integrating ODEs, finding special solutions to PDEs). Here we discuss how twisted symmetries can be used to detect integrability of Lagrangian systems which are not integrable via standard symmetries.

G. Cicogna; G. Gaeta

2010-02-07T23:59:59.000Z

433

Integrated heterodyne terahertz transceiver  

DOE Patents [OSTI]

A heterodyne terahertz transceiver comprises a quantum cascade laser that is integrated on-chip with a Schottky diode mixer. A terahertz signal can be received by an antenna connected to the mixer, an end facet or sidewall of the laser, or through a separate active section that can amplify the incident signal. The quantum cascade laser couples terahertz local oscillator power to the Schottky diode to mix with the received terahertz signal to provide an intermediate frequency output signal. The fully integrated transceiver optimizes power efficiency, sensitivity, compactness, and reliability. The transceiver can be used in compact, fieldable systems covering a wide variety of deployable applications not possible with existing technology.

Wanke, Michael C. (Albuquerque, NM); Lee, Mark (Albuquerque, NM); Nordquist, Christopher D. (Albuquerque, NM); Cich, Michael J. (Albuquerque, NM)

2012-09-25T23:59:59.000Z

434

Integrated heterodyne terahertz transceiver  

DOE Patents [OSTI]

A heterodyne terahertz transceiver comprises a quantum cascade laser that is integrated on-chip with a Schottky diode mixer. An antenna connected to the Schottky diode receives a terahertz signal. The quantum cascade laser couples terahertz local oscillator power to the Schottky diode to mix with the received terahertz signal to provide an intermediate frequency output signal. The fully integrated transceiver optimizes power efficiency, sensitivity, compactness, and reliability. The transceiver can be used in compact, fieldable systems covering a wide variety of deployable applications not possible with existing technology.

Lee, Mark (Albuquerque, NM); Wanke, Michael C. (Albuquerque, NM)

2009-06-23T23:59:59.000Z

435

Explicit global integrators  

E-Print Network [OSTI]

be advantageous. For this purpose, forward interpolation utilizing Radau Quadrature will be employed. An explicit method of global integration has been developed to estimate a solution to a differential equation. A set of functions P (x), P (x), , P (x) and a... set of points n+1 x , x , , x can be found such that n+1 r x n+1 f(u)du = g P. (x)i'(x. ) 0 i=1 for all x when f(u) is a polynomial of degree n or less. The above process is described by Axelsson as global integration. In . th the cases...

Merriam, Robert Stevens

2012-06-07T23:59:59.000Z

436

Smart Grid Integration Laboratory  

SciTech Connect (OSTI)

The initial federal funding for the Colorado State University Smart Grid Integration Laboratory is through a Congressionally Directed Project (CDP), DE-OE0000070 Smart Grid Integration Laboratory. The original program requested in three one-year increments for staff acquisition, curriculum development, and instrumentation â?? all which will benefit the Laboratory. This report focuses on the initial phase of staff acquisition which was directed and administered by DOE NETL/ West Virginia under Project Officer Tom George. Using this CDP funding, we have developed the leadership and intellectual capacity for the SGIC. This was accomplished by investing (hiring) a core team of Smart Grid Systems engineering faculty focused on education, research, and innovation of a secure and smart grid infrastructure. The Smart Grid Integration Laboratory will be housed with the separately funded Integrid Laboratory as part of CSUâ??s overall Smart Grid Integration Center (SGIC). The period of performance of this grant was 10/1/2009 to 9/30/2011 which included one no cost extension due to time delays in faculty hiring. The Smart Grid Integration Laboratoryâ??s focus is to build foundations to help graduate and undergraduates acquire systems engineering knowledge; conduct innovative research; and team externally with grid smart organizations. Using the results of the separately funded Smart Grid Workforce Education Workshop (May 2009) sponsored by the City of Fort Collins, Northern Colorado Clean Energy Cluster, Colorado State University Continuing Education, Spirae, and Siemens has been used to guide the hiring of faculty, program curriculum and education plan. This project develops faculty leaders with the intellectual capacity to inspire its students to become leaders that substantially contribute to the development and maintenance of Smart Grid infrastructure through topics such as: (1) Distributed energy systems modeling and control; (2) Energy and power conversion; (3) Simulation of electrical power distribution system that integrates significant quantities of renewable and distributed energy resources; (4) System dynamic modeling that considers end-user behavior, economics, security and regulatory frameworks; (5) Best practices for energy management IT control solutions for effective distributed energy integration (including security with the underlying physical power systems); (6) Experimental verification of effects of various arrangements of renewable generation, distributed generation and user load types along with conventional generation and transmission. Understanding the core technologies for enabling them to be used in an integrated fashion within a distribution network remains is a benefit to the future energy paradigm and future and present energy engineers.

Wade Troxell

2011-09-30T23:59:59.000Z

437

Integrative Genomics Building  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsingFunInfrared Land SurfaceVirus-Infected MacaquesIntegration ofIntegrative Genomics

438

Engineering integrated photonics for heralded quantum gates  

E-Print Network [OSTI]

Scaling up linear-optics quantum computing will require multi-photon gates which are compact, phase-stable, exhibit excellent quantum interference, and have success heralded by the detection of ancillary photons. We investigate implementation of the optimal known gate design which meets these requirements: the Knill controlled-Z gate, implemented in integrated laser-written waveguide arrays. We show that device performance is more sensitive to the small deviations in the coupler reflectivity, arising due to the tolerance values of the fabrication method, than phase variations in the circuit. The mode fidelity was also shown to be less sensitive to reflectivity and phase errors than process fidelity. Our best device achieves a fidelity of 0.931+/-0.001 with the ideal 4x4 unitary circuit and a process fidelity of 0.680+/-0.005 with the ideal computational-basis process.

T. Meany; D. N. Biggerstaff; M. A. Broome; A. Fedrizzi; M. Delanty; A. Gilchrist; G. D. Marshall; M. J. Steel; A. G. White; M. J. Withford

2015-02-11T23:59:59.000Z

439

2342 IEEE JOURNAL OF SOLID-STATE CIRCUITS, VOL. 39, NO. 12, DECEMBER 2004 A 4-A Quiescent-Current Dual-Mode Digitally  

E-Print Network [OSTI]

2342 IEEE JOURNAL OF SOLID-STATE CIRCUITS, VOL. 39, NO. 12, DECEMBER 2004 A 4-A Quiescent voltage compatibility between a single-cell lithium-ion battery voltage and a low-voltage integrated with each full charge of the battery, pulse frequency modulation (PFM) mode is preferred for light load

Sanders, Seth

440

Astronomical relativistic reference systems with multipolar expansion: the global one  

E-Print Network [OSTI]

With rapid development of techniques for astronomical observations, the precision of measurements has been significantly increasing. Theories of astronomical relativistic reference systems, which are the foundation for processing and interpreting these data now and in the future, may require extensions to satisfy the needs of these trends. Besides building a framework compatible with alternative theories of gravity and the pursuit of higher order post-Newtonian approximation, it will also be necessary to make the first order post-Newtonian multipole moments of celestial bodies be explicitly expressed in the astronomical relativistic reference systems. This will bring some convenience into modeling the observations and experiments and make it easier to distinguish different contributions in measurements. As the first step, the global solar system reference system is multipolarly expanded and the post-Newtonian mass and spin moments are shown explicitly in the metric which describes the coordinates of the system. The full expression of the global metric is given.

Yi Xie

2014-07-07T23:59:59.000Z

Note: This page contains sample records for the topic "integration mode reference" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

The Reference Design for the ILC, Costs, and What's Next  

SciTech Connect (OSTI)

A Reference Design for the International Linear Collider was recently released. The scale of the ILC is such that it must be built by an international collaboration and the design is the culmination of a unique global effort. Through ICFA, a decision was made to base the design on superconducting RF technology and then the Global Design Effort (GDE) was created to coordinate the actual accelerator design toward a construction proposal. The reference design establishes all the features of the machine, and defines both the R&D program and engineering design that will now follow over the next few years.

Barish, Barry

2007-03-26T23:59:59.000Z

442

Development of a 1-butanol reference scale dynamic olfactometer  

E-Print Network [OSTI]

C . The concentration of 1-bu- tanol saturated air which exits the coil is given by: P C v il (3) where: P ~ vapor pressure of 1-butanol at 0 C, mm Hg P il condensing coil pressure, mm Hg coil Using a reported value of 1. 1 mm Hg for P, and assumLng (19) standard... OF SATURATED 1-BUTANOL VAPOR (0 C) NECESSARY FOR DILUTION WITH 15 L/MIN CLEAN AIR (THEORETICAL) TABLE B. 2. REFERENCE CONCENTRATION MEASUREMENT WITH MIRAN SPECTROPHOTOMETER . 56 TABLE B. 3. REFERENCE CONCENTRATION GRAVIMETRICALLY MEASURED. . . . 58 TABLE...

Sorel, James Edward

1982-01-01T23:59:59.000Z

443

Symmetric construction of reference-frame-free qudits  

E-Print Network [OSTI]

By exploiting a symmetric scheme for coupling $N$ spin-1/2 constituents (the physical qubits) to states with total angular momentum $N/2-1$, we construct rotationally invariant logical qudits of dimension $d=N-1$. One can encode all qudit states, and realize all qudit measurements, by this construction. The rotational invariance of all relevant objects enables one to transmit quantum information without having aligned reference frames between the parties that exchange the qudits. We illustrate the method by explicit constructions of reference-frame-free qubits and qutrits and, for the qubit case, comment on possible experimental implementations.

Jun Suzuki; Gelo Noel Macuja Tabia; Berthold-Georg Englert

2008-10-17T23:59:59.000Z

444

NERSC/DOE FES Requirements Workshop Reference Materials  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recovery challengeMultiscaleLogos NERSCJeffrey B. NeatonReference Materials Reference

445

NERSC/DOE HEP Requirements Workshop Reference Materials  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recovery challengeMultiscaleLogos NERSCJeffrey B.StephenReference Materials Reference

446

FAQS Reference Guide - Weapon Quality Assurance | Department of Energy  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector General Office of Audit|Department of Energy56Executive212-2012FAQSFAQS ReferenceReference

447

FAQS Reference Guide -Radiation Protection | Department of Energy  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector General Office of Audit|Department of Energy56Executive212-2012FAQSFAQS ReferenceReferenceFAQS

448

Integrated Management Requirements mapping  

SciTech Connect (OSTI)

This document contains five appendices documenting how Sandia implemented the DOE Conduct of Operations (5480.19) and DOE Quality Assurance (5700.6C) orders. It provides a mapping of the Sandia integrated requirements to the specific requirements of each Order and a mapping to Sandia`s approved program for implementing the Conduct of Operations Order.

Holmes, J.T.; Andrews, N.S.

1992-06-01T23:59:59.000Z

449

Integrated Management Requirements mapping  

SciTech Connect (OSTI)

This document contains five appendices documenting how Sandia implemented the DOE Conduct of Operations (5480.19) and DOE Quality Assurance (5700.6C) orders. It provides a mapping of the Sandia integrated requirements to the specific requirements of each Order and a mapping to Sandia's approved program for implementing the Conduct of Operations Order.

Holmes, J.T.; Andrews, N.S.

1992-06-01T23:59:59.000Z

450

Integrated Safety Management  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

The order ensures that DOE/NNSA, systematically integrates safety into management and work practices at all levels, so that missions are accomplished efficiently while protecting the workers, the public, and the environment. Cancels DOE M 450.4-1 and DOE M 411.1-1C

2011-04-25T23:59:59.000Z

451

Bioluminescent bioreporter integrated circuit  

DOE Patents [OSTI]

Disclosed are monolithic bioelectronic devices comprising a bioreporter and an OASIC. These bioluminescent bioreporter integrated circuit are useful in detecting substances such as pollutants, explosives, and heavy-metals residing in inhospitable areas such as groundwater, industrial process vessels, and battlefields. Also disclosed are methods and apparatus for environmental pollutant detection, oil exploration, drug discovery, industrial process control, and hazardous chemical monitoring.

Simpson, Michael L. (Knoxville, TN); Sayler, Gary S. (Blaine, TN); Paulus, Michael J. (Knoxville, TN)

2000-01-01T23:59:59.000Z

452

Integrated Safety Management Policy  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

The policy establishes DOE's expectation for safety, including integrated safety management that will enable the Department’s mission goals to be accomplished efficiently while ensuring safe operations at all departmental facilities and activities. Cancels DOE P 411.1, DOE P 441.1, DOE P 450.2A, DOE P 450.4, and DOE P 450.7

2011-04-25T23:59:59.000Z

453

INTEGRATED COLLABORATIVE INFORMATION SYSTEMS  

E-Print Network [OSTI]

of the University Graduate School in partial fulfillment of the requirements for the degree Doctor of Philosophy, Indiana University, in partial fulfillment of the requirements for the degree of Doctor of Philosophy the risk for user. This model is motivated by the above concerns to provide flexible mechanism to integrate

454

Integrated packaging allows for improvement in switching characteristics of silicon carbide devices  

E-Print Network [OSTI]

Integrated packaging allows for improvement in switching characteristics of silicon carbide devices will be available after the conference. Abstract Silicon Carbide devices can achieve very high switching speed-mode filtering). The consequences on the switching speed are discussed. 1. Introduction Silicon carbide (Si

Paris-Sud XI, Université de

455

INTEGRATION OF AUDIO/VISUAL INFORMATION FOR USE IN HUMANCOMPUTER INTELLIGENT INTERACTION  

E-Print Network [OSTI]

INTEGRATION OF AUDIO/VISUAL INFORMATION FOR USE IN HUMAN­COMPUTER INTELLIGENT INTERACTION Vladimir,berry,huangg@ifp.uiuc.edu ABSTRACT Human­computer intelligent interaction (HCII) in virtual environments is a rapidly developing modes of human­computer communication. By using auditory and visual features at different levels

Pavlovic, Vladimir

456

A new integrated fuzzy bangbang relay control system Farrukh Nagi *, L. Perumal, J. Nagi  

E-Print Network [OSTI]

Keywords: Bang­bang Fuzzy logic control Sliding mode controller Optimal control Pneumatic rotary actuatorA new integrated fuzzy bang­bang relay control system Farrukh Nagi *, L. Perumal, J. Nagi Real-time control a b s t r a c t In this paper, we propose a new fuzzy bang­bang relay controller

Ducatelle, Frederick

457

A Strategy to Minimize Dust Foregrounds in B-mode Searches  

E-Print Network [OSTI]

The Planck satellite has identified several patches of sky with low polarized dust emission, obvious targets for searches for the cosmic-microwave-background (CMB) B-mode signal from inflationary gravitational waves. Still, given the Planck measurement uncertainties, the polarized dust foregrounds in these different candidate patches may differ by an order of magnitude or more. Here we show that a brief initial experiment to map these candidate patches more deeply at a single high frequency can efficiently zero in on the cleanest patch(es) and thus improve significantly the sensitivity of subsequent B-mode searches. A ground-based experiment with current detector technology operating at >~220 GHz for 3 months can efficiently identify a low-dust-amplitude patch and thus improve by up to 20%-60% on the sensitivity to cosmic B modes of the subsequent lower-frequency deep integration. A balloon experiment with current detector sensitivities covering the set of patches and operating at ~350 GHz can reach a similar...

Kovetz, Ely D

2015-01-01T23:59:59.000Z

458

INTEGRATED ENERGY SYSTEMS: PRODUCTIVITY & BUILDING SCIENCE  

E-Print Network [OSTI]

Integrated Design of Commercial Building Ceiling Systems Integrated Design of Residential Ducting & Air FlowINTEGRATED ENERGY SYSTEMS: PRODUCTIVITY & BUILDING SCIENCE Productivity and Interior Environments Integrated Design of Large Commercial HVAC Systems Integrated Design of Small Commercial HVAC Systems

459

A current driven electromagnetic mode in sheared and toroidal configurations  

E-Print Network [OSTI]

The induced electric field in a tokamak drives a parallel electron current flow. In an inhomogeneous, finite beta plasma, when this electron flow is comparable to the ion thermal speed, the Alfven mode wave solutions of the electromagnetic gyrokinetic equation can become nearly purely growing kink modes. Using the new "low-flow" version of the gyrokinetic code GS2 developed for momentum transport studies [Barnes et al 2013 Phys. Rev. Lett. 111, 055005], we are able to model the effect of the induced parallel electric field on the electron distribution to study the destabilizing influence of current on stability. We identify high mode number kink modes in GS2 simulations and make comparisons to analytical theory in sheared magnetic geometry. We demonstrate reassuring agreement with analytical results both in terms of parametric dependences of mode frequencies and growth rates, and regarding the radial mode structure.

Pusztai, István; Parra, Felix I; Barnes, Michael

2013-01-01T23:59:59.000Z

460

Towards a detection of individual g modes in the Sun  

E-Print Network [OSTI]

Since the detection of the asymptotic properties of the dipole gravity modes in the Sun, the quest to find the individual gravity modes has continued. A deeper analysis of the GOLF/SoHO data unveils the presence of a pattern of peaks that could be interpreted as individual dipole gravity modes. The computed collapsed spectrum -around these candidate modes- uncovers the presence of a quasi constant frequency splitting, in contrast with regions where no g modes are expected in which the collapsogram gives random results. Besides, the same technique applied to VIRGO/SoHO unveils some common signals between both power spectra. Thus, we can identify and characterize the modes, for example, with their central frequency and splittings. This would open the path towards new investigations to better constrain the solar core.

Garcia, R A; Eff-Darwich, A; Garrido, R; Jimenez, A; Mathis, S; Mathur, S; Moya, A; Palle, P L; Regulo, C; Salabert, D; Suarez, J C; Turck-Chieze, S

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "integration mode reference" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

ILU 2.0beta1 Reference Manual Bill Janssen  

E-Print Network [OSTI]

ILU 2.0beta1 Reference Manual Bill Janssen parc.xerox.com> Mike Spreitzer parc@xerox.com> Dan Larner parc@xerox.com> Chris Jacobi parc@xerox.com> (with contributions from Doug-Language Unification (ILU) system. Lots of people contributed significant amounts of code to the ILU system, including

Janssen, Bill

462

NIST Standard Reference Database 10 NIST/ASME Steam Properties  

E-Print Network [OSTI]

#12;NIST Standard Reference Database 10 NIST/ASME Steam Properties Version 2.22 Users' Guide Allan;________________________ The National Institute of Standards and Technology (NIST) uses its best efforts to deliver a high quality copy. OPTIONS AND PREFERENCES............................................ 5 5.1 Specifying Units of Measure

Magee, Joseph W.

463

sheet is a su se refer to t  

E-Print Network [OSTI]

Refer to your Search the on number for e f your course select will aut Make sure yo Build your tim at http://w in, build you departmenta nline course t ach course e includes a la tomatically sc ou pick nrolling stration and E website for in exchange a co ow the instruc explanation p button different lab

464

Reference Radiation for Cosmic Rays in RBE Research  

E-Print Network [OSTI]

effectiveness relative to a specific radiation is usually used. For low energy heavy ions and neutrons 250 keV photons are usually used for the reference radiation but their depth dose distribution is very different from that for cosmic rays. In this research...

Feng, Shaoyong

2011-10-21T23:59:59.000Z

465

Finance Committee Terms of Reference, Membership and Operating Procedures  

E-Print Network [OSTI]

95/2012 Finance Committee ­ Terms of Reference, Membership and Operating Procedures Principles 1 on, or pose any reasonable risk to, the University's finances and operations" section 18(4)(d). 3. Council has established a Finance Committee as a committee of Council. 4. The broad purpose of the Finance

Botea, Adi

466

Selected References on the History of Marine Fisheries  

E-Print Network [OSTI]

Selected References on the History of Marine Fisheries An initial goal for this special 50th, a bibliography on the history of marine fisheries. Presum ably, the list would be neither long nor time consuming to construct. Indeed, initial database and index searches pro duced little of value-a bare handful of citations

467

Environmental engineering (buildings): a bibliography. [Over 400 references  

SciTech Connect (OSTI)

The international references listed in this bibliography address energy-efficient design in the built environment in economic and human terms. Other aspects of the built environment are seating arrangements in public vehicles, urban and underground architecture, and the social impacts of new designs and technologies. (DCK)

Vance, M.

1983-01-01T23:59:59.000Z

468

QUICK REFERENCE: Nexis service 5.1 July 2006  

E-Print Network [OSTI]

off as many as you need. 4. Enter a search term. 5. Click on red search button. Quick ReferenceIndexing TechnologyTM in your search. 3. Search using "Terms and Connectors" or "Natural Language." Choose your preference at the top of the form. 4. Enter your keywords or phrases. 5. To refine search, click on Add

469

REFERENCE: The Blue Planet An Introduction to Earth System  

E-Print Network [OSTI]

REFERENCE: The Blue Planet An Introduction to Earth System Science. Brian J. Skinner and Barbara of the Earth system. · Describe the cycles of the materials and energy through the Earth system. · Learn how science works and how models are used in Earth system science. #12;"It is the science that studies

Gilbes, Fernando

470

Site-Searching Strategies of Searchers Referred from Search Engines  

E-Print Network [OSTI]

1 Site-Searching Strategies of Searchers Referred from Search Engines Adan Ortiz-Cordova College and then submit multiple broad queries on the site-search engine, (2) the navigators who submit a query to the major search engine that is part of a URL and then submit specific queries to the site-search engine

Jansen, James

471

Reference: RGL 83-04 Subject: PUBLIC NOTICE-AGRICULTURE  

E-Print Network [OSTI]

Reference: RGL 83-04 Subject: PUBLIC NOTICE-AGRICULTURE Title: DISTRIBUTION OF PUBLIC NOTICES FOR ACTIVITIES INVOLVING AGRICULTURAL CONVERSIONS Issued: 03/04/83 Expires: 12/31/85 Originator: DAEN AGRICULTURAL USE OF LAND. 1. If an applicant's proposal involves the conversion of land so as to increase

US Army Corps of Engineers

472

UK Red Squirrel Group Terms of Reference Introduction  

E-Print Network [OSTI]

UK Red Squirrel Group Terms of Reference Introduction The red squirrel Sciurus vulgaris has of the Bern Convention, is Lower Risk ­near threatened on the IUCN Red List and is protected under Schedules 5-ordinate, support and provide advice on the implementation of conservation measures for the red squirrel in the UK

473

What is the reference frame of an accelerated observer?  

E-Print Network [OSTI]

The general construction of extended refrence frames for noninertial observers in flat space is studied. It is shown that, if the observer moves inertially before and after an arbitrary acceleration and rotation, the region where reference frames can coincide with an inertial system is bounded for final velocities exceeding 0.6 c.

K. -P. Marzlin

1998-03-12T23:59:59.000Z

474

Wind Energy Learning Curves for Reference in Expert Elicitations  

E-Print Network [OSTI]

Wind Energy Learning Curves for Reference in Expert Elicitations Sarah Mangels, Erin Baker. Abstract: This study presents future projections of wind energy capacity and cost based on historical data. The study will be used during wind- energy expert elicitations (formal interviews aimed to quantify

Mountziaris, T. J.

475

Specification of composite objects based on the ODP Reference Model  

E-Print Network [OSTI]

Specification of composite objects based on the ODP Reference Model D. Ramazani and G. v. Bochmann}@iro.umontreal.ca Abstract In this paper, we describe our experience in using the RM-ODP to specify composite objects. The concept of a composite object as defined in RM-ODP does not take into account its dynamic structure

von Bochmann, Gregor

476

Principles of Science Principles of Biology Reference Edition  

E-Print Network [OSTI]

topics such as cancer, climate change and ocean health #12;How can the Principles of Biology Reference · Weekly usage reports · Advice to students seeking science careers · English communication guide to Scientific Communication · Guide to Career Planning · Insight into current science research hot topics High

Cai, Long

477

Constraint Management in Fuel Cells: A Fast Reference Governor Approach  

E-Print Network [OSTI]

admissible current demand to the fuel cell based on on-line optimization of a scalar parameter and onConstraint Management in Fuel Cells: A Fast Reference Governor Approach Ardalan Vahidi Ilya Kolmanovsky Anna Stefanopoulou Abstract-- The air supply system in a fuel cell may be susceptible

Stefanopoulou, Anna

478

BC Reference number ISO/IEC 14882:1998(E)  

E-Print Network [OSTI]

of International Standardization Organization (ISO), International Electrotechnical Commission (IEC), AmericanBC Reference number ISO/IEC 14882:1998(E) INTERNATIONAL STANDARD ISO/IEC 14882 First edition 1998 by ANSI as an American National Standard. Date of ANSI Approval: 7/27/98 Published by American National

Graham, Nick

479

Algorithm for Treatment of Hypertension Reference Card From the  

E-Print Network [OSTI]

Algorithm for Treatment of Hypertension Reference Card From the Seventh Report of the Joint Prehypertension 120­139 or 80­89 Hypertension, Stage 1 140­159 or 90­99 Hypertension, Stage 2 160 or 100 · Assess risk factors and comorbidities. · Reveal identifiable causes of hypertension. · Assess presence

Bandettini, Peter A.

480

Modeling the Arterial System with Reference to an Anesthesia Simulator  

E-Print Network [OSTI]

Modeling the Arterial System with Reference to an Anesthesia Simulator Ph.D. Thesis 1 by Mette), and at the Department of Anesthesia, Herlev University Hospital. The study has been organized as an industrial Ph S.A. Pedersen, Roskilde University, and M.D. P.F. Jensen, Ph.D., Department of Anesthesia, Herlev

Olufsen, Mette Sofie

Note: This page contains sample records for the topic "integration mode reference" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Introduction Wikipedia Revision History Applications Conclusions References Mining Wikipedia's  

E-Print Network [OSTI]

Revision History Revision History Plots Figure: RH plots for articles 2005 (5,714 rev.) and 2007 (11,494 rev.) Mihai Grigore Mining Wikipedia's Article Revision History 5/24 #12;Introduction WikipediaIntroduction Wikipedia Revision History Applications Conclusions References Mining Wikipedia

Neumann, GĂĽnter

482

Reference: RGL 83-09 Subject: POWER TRANSMISSION LINES  

E-Print Network [OSTI]

Reference: RGL 83-09 Subject: POWER TRANSMISSION LINES Title: MARKING OF AERIAL POWER TRANSMISSION. 1. The marking of aerial power transmission lines, cables, and structures over the navigable waters LINES, CABLES, & STRUCTURES Issued: 07/13/83 Expires: 12/31/85 Originator: DAEN-CWO-N Description: ARMY

US Army Corps of Engineers

483

Environmental Guidance Program Reference Book: American Indian Religious Freedom Act  

SciTech Connect (OSTI)

This Reference Book contains a copy of the American Indian Religious Freedom Act and guidance for DOE compliance with the statute. The document is provided to DOE and contractor staff for informational purposes only and should not be interpreted as legal guidance. Updates that include important new requirements will be provided periodically.

Not Available

1987-11-01T23:59:59.000Z

484

Reference: RGL 84-07 Subject: MAPPING PIPELINES  

E-Print Network [OSTI]

Reference: RGL 84-07 Subject: MAPPING PIPELINES Title: CHARTING OF PIPELINES AND CABLES Issued: 05/01/84 Expires: 12/31/86 Originator: DAEN-CWO-N Description: REQUIRES MAPPING OF PIPELINE CROSSINGS ON NAUTICAL and pipeline crossings on nautical charts published by the Government. This policy is contained in 33 CFR 209

US Army Corps of Engineers

485

Unit References Module 1: The Science of Climate Change  

E-Print Network [OSTI]

164 Unit References Module 1: The Science of Climate Change 1. Intergovernmental Panel on Climate Change. (2007). Climate change 2007: synthesis report. IPCC Plenary XXVII (Valencia, Spain, 12-17 November 2007). 2. America's Climate Choices: Panel on Advancing the Science of Climate Change, National

Smith, Kate

486

Rev. January 30, 2012 1 REFERENCE and BACKGROUND CHECK  

E-Print Network [OSTI]

Rev. January 30, 2012 1 REFERENCE and BACKGROUND CHECK PROCESS HUMAN RESOURCES Workforce Planning, as allowed by law, and consistent with the job described. The appropriate Workforce Planning Analyst the documentation. (Please note that the review will take place in Human Resources, under a Workforce Planning

Eirinaki, Magdalini

487

Page Replacement and Reference Bit Emulation in Mach  

E-Print Network [OSTI]

Page Replacement and Reference Bit Emulation in Mach Richard P. Draves rpd@cs.cmu.edu School of Computer Science Carnegie Mellon University 5000 Forbes Avenue Pittsburgh, PA 15213 Abstract A page­replacement in software. This paper describes the Mach kernel's page­replacement algorithm and considers three software

488

Chapter 11 References Bering Sea Chinook Salmon Bycatch 629  

E-Print Network [OSTI]

Chapter 11 References Bering Sea Chinook Salmon Bycatch 629 Final EIS ­ December 2009 11 statement for essential fish habitat identification and conservation in Alaska (EFH EIS). NMFS Alaska/61/13/8 (AFA EIS). NMFS Alaska Regional Office, PO Box 21668, Juneau, Alaska. June. URL: http://www.fakr.noaa.gov/sustainablefisheries/afa/eis

489

Reference: RGL 81-02 Subject: NEPA-CORPS EIS  

E-Print Network [OSTI]

Reference: RGL 81-02 Subject: NEPA-CORPS EIS Title: REVIEW OF ANOTHER AGENCY'S EIS Issued: 03/17/81 Expires: 12/31/83 Originator: DAEN-CWO-N Description: EIS WILL ONLY BE PREPARED WHEN CORPS PERMIT ACTION sentence of paragraph 23 of Appendix B to 33 CFR 230, a draft and final supplement to another agency's EIS

US Army Corps of Engineers

490

RESEARCH Open Access Introducing the Forensic Research/Reference on  

E-Print Network [OSTI]

RESEARCH Open Access Introducing the Forensic Research/Reference on Genetics knowledge base, FROG used in forensic teaching, research, and investigations. The Fst value of each CODIS marker tends identification and description. However, online tools and databases that can be used for forensic research

Kidd, Kenneth

491

Integrated international safeguards concepts for fuel reprocessing  

SciTech Connect (OSTI)

This report is the fourth in a series of efforts by the Los Alamos National Laboratory and Sandia National Laboratories, Albuquerque, to identify problems and propose solutions for international safeguarding of light-water reactor spent-fuel reprocessing plants. Problem areas for international safeguards were identified in a previous Problem Statement (LA-7551-MS/SAND79-0108). Accounting concepts that could be verified internationally were presented in a subsequent study (LA-8042). Concepts for containment/surveillance were presented, conceptual designs were developed, and the effectiveness of these designs was evaluated in a companion study (SAND80-0160). The report discusses the coordination of nuclear materials accounting and containment/surveillance concepts in an effort to define an effective integrated safeguards system. The Allied-General Nuclear Services fuels reprocessing plant at Barnwell, South Carolina, was used as the reference facility.

Hakkila, E.A.; Gutmacher, R.G.; Markin, J.T.; Shipley, J.P.; Whitty, W.J.; Camp, A.L.; Cameron, C.P.; Bleck, M.E.; Ellwein, L.B.

1981-12-01T23:59:59.000Z

492

Microwave mode shifting antenna system for regenerating particulate filters  

DOE Patents [OSTI]

A regeneration system comprises a particulate matter (PM) filter including a microwave energy absorbing surface, and an antenna system comprising N antennas and an antenna driver module that sequentially drives the antenna system in a plurality of transverse modes of the antenna system to heat selected portions of the microwave absorbing surface to regenerate the PM filter, where N is an integer greater than one. The transverse modes may include transverse electric (TE) and/or transverse magnetic (TM) modes.

Gonze, Eugene V [Pinckney, MI; Kirby, Kevin W [Calabasas Hills, CA; Phelps, Amanda [Malibu, CA; Gregoire, Daniel J [Thousand Oaks, CA

2011-04-26T23:59:59.000Z

493

Optimization to reduce fuel consumption in charge depleting mode  

DOE Patents [OSTI]

A powertrain includes an internal combustion engine, a motor utilizing electrical energy from an energy storage device, and a plug-in connection. A Method for controlling the powertrain includes monitoring a fuel cut mode, ceasing a fuel flow to the engine based upon the fuel cut mode, and through a period of operation including acceleration of the powertrain, providing an entirety of propelling torque to the powertrain with the electrical energy from the energy storage device based upon the fuel cut mode.

Roos, Bryan Nathaniel; Martini, Ryan D.

2014-08-26T23:59:59.000Z

494

Circular modes for flat beams in the LHC  

DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

Typically x/y optical coupling is considered as unwanted and thus suppressed; particular exclusions are electron and ionization coolers. Could some special coupled modes be effectively applied for the LHC complex? Perhaps, the answer is positive: use of the circular modes in the injectors with their transformation into planar modes in the LHC allows both the space charge and beam-beam luminosity limitations to be significantly reduced, if not practically eliminated.

Burov, A.

2013-06-01T23:59:59.000Z

495

Theory of semicollisional kinetic Alfven modes in sheared magnetic fields  

SciTech Connect (OSTI)

The spectra of the semicollisional kinetic Alfven modes in a sheared slab geometry are investigated, including the effects of finite ion Larmor radius and diamagnetic drift frequencies. The eigenfrequencies of the damped modes are derived analytically via asymptotic analyses. In particular, as one reduces the resistivity, we find that, due to finite ion Larmor radius effects, the damped mode frequencies asymptotically approach finite real values corresponding to the end points of the kinetic Alfven continuum.

Hahm, T.S.; Chen, L.

1985-02-01T23:59:59.000Z

496

GPFS HPSS Integration: Implementation Experience  

E-Print Network [OSTI]

Conference on Mass Storage Systems and Technologies, April361-371. [iii] IEEE Mass Storage System Reference Model V5 (High Performance Storage System Scalability: Architecture,

Hazen, Damian

2008-01-01T23:59:59.000Z

497

Mode trap for absorbing transverse modes of an accelerated electron beam  

DOE Patents [OSTI]

A mode trap to trap and absorb transverse modes formed by a beam in a linear accelerator includes a waveguide having a multiplicity of electrically conductive (preferably copper) irises and rings, each iris and ring including an aperture, and the irises and rings being stacked in a side-by-side, alternating fashion such that the apertures of the irises and rings are concentrically aligned. An absorbing material layer such as a dielectric is embedded in each iris and ring, and this absorbing material layer encircles, but is circumferentially spaced from its respective aperture. Each iris and ring includes a plurality of circumferentially spaced slots around its aperture and extending radially out toward its absorbing material layer. 9 figs.

Chojnacki, E.P.

1994-05-31T23:59:59.000Z

498

Mode trap for absorbing transverse modes of an accelerated electron beam  

DOE Patents [OSTI]

A mode trap to trap and absorb transverse modes formed by a beam in a linear accelerator includes a waveguide having a multiplicity of electrically conductive (preferably copper) irises and rings, each iris and ring including an aperture, and the irises and rings being stacked in a side-by-side, alternating fashion such that the apertures of the irises and rings are concentrically aligned. An absorbing material layer such as a dielectric is embedded in each iris and ring, and this absorbing material layer encircles, but is circumferentially spaced from its respective aperture. Each iris and ring includes a plurality of circumferentially spaced slots around its aperture and extending radially out toward its absorbing material layer.

Chojnacki, Eric P. (Woodridge, IL)

1994-01-01T23:59:59.000Z

499

Asymmetric modes decomposition in an overmoded relativistic backward wave oscillator  

SciTech Connect (OSTI)

Most of the investigated overmoded relativistic backward wave oscillators (RBWOs) are azimuthally symmetric; thus, they are designed through two dimensional (2-D) particle-in-cell (PIC) simulations. However, 2-D PIC simulations cannot reveal the effect of asymmetric modes on beam-wave interaction. In order to investigate whether asymmetric mode competition needs to be considered in the design of overmoded RBWOs, a numerical method of determining the composition of both symmetric and asymmetric modes in three dimensional (3-D) PIC simulations is introduced in this paper. The 2-D and 3-D PIC simulation results of an X-band overmoded RBWO are analyzed. Our analysis indicates that the 2-D and 3-D PIC simulation results of our device are quite different due to asymmetric mode competition. In fact, asymmetric surface waves, especially EH{sub 11} mode, can lead to serious mode competition when electron beam propagates near the surface of slow wave structures (SWSs). Therefore, additional method of suppressing asymmetric mode competition, such as adjusting the reflections at both ends of SWSs to decrease the Q-factor of asymmetric modes, needs to be utilized in the design of overmoded RBWOs. Besides, 3-D PIC simulation and modes decomposition are essential for designing overmoded RBWOs.

Zhang, Dian; Zhang, Jun, E-mail: zhangjun@nudt.edu.cn; Zhong, Huihuang; Jin, Zhenxing; Ju, Jinchuan [College of Optoelectronic Science and Engineering, National University of Defense Technology, Changsha 410073 (China)

2014-09-15T23:59:59.000Z

500

CHARACTERIZATION OF A GEIGER-MODE AVALANCHE PHOTODIODE DETECTOR FOR  

E-Print Network [OSTI]

CHARACTERIZATION OF A GEIGER-MODE AVALANCHE PHOTODIODE DETECTOR FOR HIGH SPECTRAL RESOLUTION LIDAR................................................................................................ 20 3.2 Operation principles of an avalanche photodiode.................................. 22 3

Eloranta, Edwin W.