Powered by Deep Web Technologies
Note: This page contains sample records for the topic "integration cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

AN ADVANCED TOOL FOR APPLIED INTEGRATED SAFETY MANAGEMENT  

SciTech Connect

WESKEM, LLC's Environmental, Safety and Health (ES&H) Department had previously assessed that a lack of consistency, poor communication and using antiquated communication tools could result in varying operating practices, as well as a failure to capture and disseminate appropriate Integrated Safety Management (ISM) information. To address these issues, the ES&H Department established an Activity Hazard Review (AHR)/Activity Hazard Analysis (AHA) process for systematically identifying, assessing, and controlling hazards associated with project work activities during work planning and execution. Depending on the scope of a project, information from field walkdowns and table-top meetings are collected on an AHR form. The AHA then documents the potential failure and consequence scenarios for a particular hazard. Also, the AHA recommends whether the type of mitigation appears appropriate or whether additional controls should be implemented. Since the application is web based, the information is captured into a single system and organized according to the >200 work activities already recorded in the database. Using the streamlined AHA method improved cycle time from over four hours to an average of one hour, allowing more time to analyze unique hazards and develop appropriate controls. Also, the enhanced configuration control created a readily available AHA library to research and utilize along with standardizing hazard analysis and control selection across four separate work sites located in Kentucky and Tennessee. The AHR/AHA system provides an applied example of how the ISM concept evolved into a standardized field-deployed tool yielding considerable efficiency gains in project planning and resource utilization. Employee safety is preserved through detailed planning that now requires only a portion of the time previously necessary. The available resources can then be applied to implementing appropriate engineering, administrative and personal protective equipment controls in the field.

Potts, T. Todd; Hylko, James M.; Douglas, Terence A.

2003-02-27T23:59:59.000Z

2

Formal Model Merging Applied to Class Diagram Integration  

Science Conference Proceedings (OSTI)

The integration of software artifacts is present in many scenarios of the Software Engineering field: object-oriented modeling, relational databases, XML schemas, ontologies, aspect-oriented programming, etc. In Model Management, software artifacts are ... Keywords: Model Management, Model-Driven Engineering, QVT Relations, conflict resolution, model merging

Artur Boronat; Jos . Cars; Isidro Ramos; Patricio Letelier

2007-01-01T23:59:59.000Z

3

Development of an Integrated Multi-Contaminant Removal Process Applied to Warm Syngas Cleanup  

NLE Websites -- All DOE Office Websites (Extended Search)

Gasification Gasification Technologies contacts Gary J. stiegel Gasification Technology Manager National Energy Technology Laboratory 626 Cochrans Mill Road P.O. Box 10940 Pittsburgh, PA 15236 412-386-4499 gary.stiegel@netl.doe.gov Jenny tennant Project Manager National Energy Technology Laboratory 3610 Collins Ferry Road P.O. Box 880 Morgantown, WV 26507 304-285-4830 jenny.tennant@netl.doe.gov Howard Meyer Principal Project Manager Gas Technology Institute 1700 South Mount Prospect Road Des Plaines, IL 60018 847-768-0955 howard.meyer@gastechnology.org Development of an IntegrateD multI-ContamInant removal proCess applIeD to Warm syngas Cleanup Description The U.S. has more coal than any other country, and through gasification this coal can be converted into electricity, liquid fuels, chemicals or hydrogen. However,

4

A new hybrid for improvement of auto-regressive integrated moving average models applying particle swarm optimization  

Science Conference Proceedings (OSTI)

A time series forecasting is an active research applied significantly in a variety of economics areas. Over the past three decades an auto-regressive integrated moving average (ARIMA) model, as one of the most important time series models, has been applied ... Keywords: ARIMA, Forecasting, PSOARIMA

Shahrokh Asadi; Akbar Tavakoli; Seyed Reza Hejazi

2012-04-01T23:59:59.000Z

5

Energy analysis of facade-integrated photovoltaic systems applied to UAE commercial buildings  

SciTech Connect

Developments in the design and manufacture of photovoltaic cells have recently been a growing concern in the UAE. At present, the embodied energy pay-back time (EPBT) is the criterion used for comparing the viability of such technology against other forms. However, the impact of PV technology on the thermal performance of buildings is not considered at the time of EPBT estimation. If additional energy savings gained over the PV system life are also included, the total EPBT could be shorter. This paper explores the variation of the total energy of building integrated photovoltaic systems (BiPV) as a wall cladding system applied to the UAE commercial sector and shows that the ratio between PV output and saving in energy due to PV panels is within the range of 1:3-1:4. The result indicates that for the southern and western facades in the UAE, the embodied energy pay-back time for photovoltaic system is within the range of 12-13 years. When reductions in operational energy are considered, the pay-back time is reduced to 3.0-3.2 years. This study comes to the conclusion that the reduction in operational energy due to PV panels represents an important factor in the estimation of EPBT. (author)

Radhi, Hassan [Architectural Engineering Department, UAE University, Al-ain (United Arab Emirates)

2010-12-15T23:59:59.000Z

6

Development of an Integrated Multicontaminant Removal Process Applied to Warm Syngas Cleanup for Coal-Based Advanced Gasification Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

an Integrated an Integrated Multicontaminant Removal Process Applied to Warm Syngas Cleanup for Coal-Based Advanced Gasification Systems Background The U.S. has more coal than any other country, and it can be converted through gasification into electricity, liquid fuels, chemicals, or hydrogen. However, for coal gasification to become sufficiently competitive to benefit the U.S. economy and help reduce our dependence on foreign fuels, gasification costs must be reduced

7

Systems engineering applied to integrated safety management for high consequence facilities  

SciTech Connect

Integrated Safety Management is a concept that is being actively promoted by the U.S. Department of Energy as a means of assuring safe operation of its facilities. The concept involves the integration of safety precepts into work planning rather than adjusting for safe operations after defining the work activity. The system engineering techniques used to design an integrated safety management system for a high consequence research facility are described. An example is given to show how the concepts evolved with the system design.

Barter, R; Morais, B

1998-11-10T23:59:59.000Z

8

Route Selection and Pedestrian Traffic: Applying an Integrated Modeling Approach to Understanding Movement  

E-Print Network (OSTI)

J. Ozik . 2007. Visual agent-based model development withToward integration of agent-based models and GIS. Journal ofspatial events: Agent-based models of mobility in carnivals

Altaweel, Mark R; Wu, Yanwei

2010-01-01T23:59:59.000Z

9

An Integrated Turbulence Scheme for Boundary Layers with Shallow Cumulus Applied to Pollutant Transport  

Science Conference Proceedings (OSTI)

A scheme is described that provides an integrated description of turbulent transport in free convective boundary layers with shallow cumulus. The scheme uses a mass-flux formulation, as is commonly found in cumulus schemes, and a 1.5-order ...

Wayne M. Angevine

2005-09-01T23:59:59.000Z

10

Solar energy applied to dehumidification and water heating in an integrated system  

DOE Green Energy (OSTI)

This project involved the demonstration of a desiccant dryer assist for use with residential air conditioning systems and designed for retrofitting to in-place equipment. The dryer is part of an integrated package including solar regeneration of the desiccant, water heating, and winter time humidification. Some of the key features and results of the project are summarized in this report.

Fago, E.T. Jr.

1982-03-17T23:59:59.000Z

11

Applying an Integrated Risk Management Approach to Risks from Severe Geomagnetic Disturbances  

Science Conference Proceedings (OSTI)

High-impact, low-frequency (HILF) events such as coordinated risk attacks, pandemics, severe geomagnetic disturbances (GMDs), electromagnetic pulse weapons (EMPs), and high-altitude electromagnetic pulse weapons (HEMPs) have the potential to cause significant damage to the power grid; but because they are rare or have never occurred the industry has little experience in dealing with them. An integrated risk-management strategy is needed to address them. Such a strategy could include a thorough risk ...

2012-10-31T23:59:59.000Z

12

Energy Smart Schools--Applied Research, Field Testing, and Technology Integration  

DOE Green Energy (OSTI)

The National Association of State Energy Officials (NASEO) in conjunction with the California Energy Commission, the Energy Center of Wisconsin, the Florida Solar Energy Center, the New York State Energy Research and Development Authority, and the Ohio Department of Development's Office of Energy Efficiency conducted a four-year, cost-share project with the U.S. Department of Energy (USDOE), Office of Energy Efficiency and Renewable Energy to focus on energy efficiency and high-performance technologies in our nation's schools. NASEO was the program lead for the MOU-State Schools Working group, established in conjunction with the USDOE Memorandum of Understanding process for collaboration among state and federal energy research and demonstration offices and organizations. The MOU-State Schools Working Group included State Energy Offices and other state energy research organizations from all regions of the country. Through surveys and analyses, the Working Group determined the school-related energy priorities of the states and established a set of tasks to be accomplished, including the installation and evaluation of microturbines, advanced daylighting research, testing of schools and classrooms, and integrated school building technologies. The Energy Smart Schools project resulted in the adoption of advanced energy efficiency technologies in both the renovation of existing schools and building of new ones; the education of school administrators, architects, engineers, and manufacturers nationwide about the energy-saving, economic, and environmental benefits of energy efficiency technologies; and improved the learning environment for the nation's students through use of better temperature controls, improvements in air quality, and increased daylighting in classrooms. It also provided an opportunity for states to share and replicate successful projects to increase their energy efficiency while at the same time driving down their energy costs.

Nebiat Solomon; Robin Vieira; William L. Manz; Abby Vogen; Claudia Orlando; Kimberlie A. Schryer

2004-12-01T23:59:59.000Z

13

Preface to ISIF 2009 special issue of Journal of Applied Physics : science and technology of integrated functionalities.  

SciTech Connect

The science and technology of ferroelectric thin films and their applications have attracted many researchers and experienced tremendous progress in the past 20 years. The recent worldwide increase in commercial applications of ferroelectric devices such as smart cards based on nonvolatile ferroelectric random access memories is a symbol of both the maturity and the acceptance of the technology. The 21st International Symposium on Integrated Ferroelectrics (ISIF 2009), held on September 22 to October 2, 2009 in Colorado Springs, CO, provided a forum for the academic and national laboratories research community and industry to present and share their new findings, achievements, and opinions on integrated ferroelectrics and their applications. The International Symposium on Integrated Ferroelectrics hosted the ISIF 2009. This was the first year where the ISIF held the conference in its new format under the name of International Symposium on Integrated Functionalities. The General Chairs of the ISIF in consultation with the Advisory Board and the ISIF community decided to revise the focus of the conference in order to broaden the scope to the science and technology of multifunctional materials and devices. This decision was taken in view that a new paradigm in materials, materials integration, and devices is emerging with a view to the development of a new generation of micro- and nanoscale multifunctional devices. The program included three plenary presentations on diverse topics such as 'The Role of Nonvolatile Memory in Ubiquitous Computing,' 'Ferroelectrics and High Density Memory Technology,' 'Nanoscale Ferroelectrics and Interfaces: Size Effects,' four tutorial lectures on diverse topics, such as 'Magnetic Memory Applications,' 'Ferroelectrics and Ferroelectric Devices,' 'Challenges for High-K Dielectrics on High Mobility Channels,' 'Solar Cell Materials,' one poster session, and eight oral sessions. Thanks to the great efforts made by the ISIF organization committee and the session chairs, the conference successfully achieved its objectives and the work presented reflected very well the most recent advances of integrated ferroelectrics and their applications, as well as advances in other areas related to the new theme of Integrated Functionalities. Many aspects of ferroelectric, piezoelectric, high-K dielectric, magnetic, and phase change materials, including the science and technology of these materials in thin film form, integration with other thin film materials (metals or oxide electrodes), and fabrication of micro- and nanostructures based on these heterostructure layers, and device architecture and physics, were addressed from the experimental point of view. Work on theory and computer simulations of the mentioned materials and devices were discussed also with a view to the promising applications to multifunctional devices. In addition, the ISIF 2009 featured discussions of alternative nonvolatile memory concepts and materials, such as phase change memories, research on multiferroics and magnetoelectric materials, ferroelectric photovoltaics, and new directions on the science of perovskites such as biomolecular/polarizable interfaces, and bio-ferroelectric and other oxide interfaces. Following the standard submission and peer review process of Journal of Applied Physics, the selected papers presented in ISIF 2009 in Colorado Springs are published in this special issue. We believe that the papers in this special issue represent the forefront contributions to ISIF 2009 in the various areas of fundamental and applied science of integrated ferroelectrics and functionalities and their applications. We would like to take this opportunity to thank the following organizations and companies for their support and sponsorship for ISIF 2009, namely: Aixact Systems GMBH, Radiant Technologies, Symetrix Corporation, and Taylor and Francis Publishers. We would also like to thank the conference and session chairs, advisory and organizing committee members for their hard work that resulted in a very successful ISIF 2009, now in

Auciello, O.; Dey, S.; Paz de Araujo, C. (Center for Nanoscale Materials); ( MSD); (Arizona State Univ.); (Symetrix Corp.)

2011-05-01T23:59:59.000Z

14

Applying technology strategy with enterprise architecting : a case study in transformation planning for integrating Unmanned Aircraft Systems into the National Airspace  

E-Print Network (OSTI)

The research presented in this thesis combines Enterprise Architecture and Technology Strategy for analyzing, evaluating, and recommending appropriate solutions for integrating Unmanned Aircraft Systems (UAS) into the ...

Richardson, Kristina L. (Kristina Lynn)

2009-01-01T23:59:59.000Z

15

The Area-Time-Integral Technique to Estimate Convective Rain Volumes over Areas Applied to Satellite DataA Preliminary Investigation  

Science Conference Proceedings (OSTI)

Early work attempting to apply GOES rapid scan satellite data to a recently developed simple radar technique used to estimate convective rain volumes over areas in a semiarid environment (the northern Great Plains) is described.

AndrA. Doneaud; James R. Miller Jr.; L. Ronald Johnson; Thomas H. Vonder Haar; Patrick Laybe

1987-01-01T23:59:59.000Z

16

Application of mixed mode integration and new implicit inline integration at Toyota  

E-Print Network (OSTI)

This paper reports results from applying inline integration and mixed mode integration to two real applications

S. Soejima; T. Matsuba

2002-01-01T23:59:59.000Z

17

Development of an Integrated Multi-Contaminant Removal Process Applied to Warm Syngas Cleanup for Coal-Based Advanced Gasification Systems  

Science Conference Proceedings (OSTI)

This project met the objective to further the development of an integrated multi-contaminant removal process in which H2S, NH3, HCl and heavy metals including Hg, As, Se and Cd present in the coal-derived syngas can be removed to specified levels in a single/integrated process step. The process supports the mission and goals of the Department of Energy??s Gasification Technologies Program, namely to enhance the performance of gasification systems, thus enabling U.S. industry to improve the competitiveness of gasification-based processes. The gasification program will reduce equipment costs, improve process environmental performance, and increase process reliability and flexibility. Two sulfur conversion concepts were tested in the laboratory under this project, i.e., the solventbased, high-pressure University of California Sulfur Recovery Process ?? High Pressure (UCSRP-HP) and the catalytic-based, direct oxidation (DO) section of the CrystaSulf-DO process. Each process required a polishing unit to meet the ultra-clean sulfur content goals of <50 ppbv (parts per billion by volume) as may be necessary for fuel cells or chemical production applications. UCSRP-HP was also tested for the removal of trace, non-sulfur contaminants, including ammonia, hydrogen chloride, and heavy metals. A bench-scale unit was commissioned and limited testing was performed with simulated syngas. Aspen-Plus®-based computer simulation models were prepared and the economics of the UCSRP-HP and CrystaSulf-DO processes were evaluated for a nominal 500 MWe, coal-based, IGCC power plant with carbon capture. This report covers the progress on the UCSRP-HP technology development and the CrystaSulf-DO technology.

Howard Meyer

2010-11-30T23:59:59.000Z

18

Final Report- "An Algorithmic and Software Framework for Applied Partial Differential Equations (APDEC): A DOE SciDAC Integrated Software Infrastructure Center (ISIC)  

Science Conference Proceedings (OSTI)

All of the work conducted under the auspices of DE-FC02-01ER25473 was characterized by exceptionally close collaboration with researchers at the Lawrence Berkeley National Laboratory (LBNL). This included having one of my graduate students - Sarah Williams - spend the summer working with Dr. Ann Almgren a staff scientist in the Center for Computational Sciences and Engineering (CCSE) which is a part of the National Energy Research Supercomputer Center (NERSC) at LBNL. As a result of this visit Sarah decided to work on a problem suggested by Dr. John Bell the head of CCSE for her PhD thesis, which she finished in June 2007. Writing a PhD thesis while working at one of the University of California (UC) managed DOE laboratories is a long established tradition at the University of California and I have always encouraged my students to consider doing this. For example, in 2000 one of my graduate students - Matthew Williams - finished his PhD thesis while working with Dr. Douglas Kothe at the Los Alamos National Laboratory (LANL). Matt is now a staff scientist in the Diagnostic Applications Group in the Applied Physics Division at LANL. Another one of my graduate students - Christopher Algieri - who was partially supported with funds from DE-FC02-01ER25473 wrote am MS Thesis that analyzed and extended work published by Dr. Phil Colella and his colleagues in 1998. Dr. Colella is the head of the Applied Numerical Algorithms Group (ANAG) in the National Energy Research Supercomputer Center at LBNL and is the lead PI for the APDEC ISIC which was comprised of several National Laboratory research groups and at least five University PI's at five different universities. Chris Algieri is now employed as a staff member in Dr. Bill Collins' research group at LBNL developing computational models for climate change research. Bill Collins was recently hired at LBNL to start and be the Head of the Climate Science Department in the Earth Sciences Division at LBNL. Prior to this he had been a Deputy Section Head at the National Center for Atmospheric Research in Colorado. My understanding is that Chris Algieri is the first person that Bill hired after coming to LBNL. The plan is that Chris Algieri will finish his PhD thesis while employed as a staff scientist in Bill's group. Both Sarah and Chris were supported in part with funds from DE-FC02-01ER25473. In Sarah's case she received support both while at U.C. Davis (UCD) taking classes and writing an MS thesis and during some of the time she was living in Berkeley, working at LBNL and finishing her PhD thesis. In Chris' case he was at U.C. Davis during the entire time he received support from DE-FC02-01ER25473. More specific details of their work are included in the report below. Finally my own research conducted under the auspices of DE-FC02-01ER25473 either involved direct collaboration with researchers at LBNL - Phil Colella and Peter Schwartz who is a member of Phil's Applied Numerical Algorithms Group - or was on problems that are closely related to research that has been and continues to be conducted by researchers at LBNL. Specific details of this work can be found below. Finally, I would like to note that the work conducted by my students and me under the auspices of this contract is closely related to work that I have performed with funding from my DOE MICS contract DE-FC02-03ER25579 'Development of High-Order Accurate Interface Tracking Algorithms and Improved Constitutive Models for Problems in Continuum Mechanics with Applications to Jetting' and with my CoPI on that grant Professor Greg Miller of the Department of Applied Science at UCD. In theory I tried to use funds from the SciDAC grant DE-FC02-01ER25473 to support work that directly involved implementing algorithms developed by my research group at U.C. Davis in software that was developed and is maintained by my SciDAC CoPI's at LBNL.

Elbridge Gerry Puckett

2008-05-13T23:59:59.000Z

19

Applied Science  

NLE Websites -- All DOE Office Websites (Extended Search)

Applied Science Applied Science Correlation of predicted and measured iron oxidation states in mixed iron oxides H. D. Rosenfeld and W. L. Holstein Development of a quantitative measurement of a diesel spray core using synchrotron x-rays C.F. Powell, Y. Yue, S. Gupta, A. McPherson, R. Poola, and J. Wang Localized phase transformations by x-ray-induced heating R.A. Rosenberg, Q. Ma, W. Farrell, E.D. Crozier, G.J. Soerensen, R.A. Gordon, and D.-T. Jiang Resonant x-ray scattering at the Se edge in ferroelectric liquid crystal materials L. Matkin, H. Gleeson, R. Pindak, P. Mach, C. Huang, G. Srajer, and J. Pollmann Synchrotron-radiation-induced anisotropic wet etching of GaAs Q. Ma, D.C. Mancini, and R.A. Rosenberg Synchrotron-radiation-induced, selective-area deposition of gold on

20

PHOTOGRAMMETRIC ENGINEERING & REMOTE SENSING 1 ADVISER: Immersive Scientific Visualization Applied  

E-Print Network (OSTI)

be applied to the terrain (Figure 2b). A custom pixel shader was integrated with ROAM to render the dynamic

Head III, James William

Note: This page contains sample records for the topic "integration cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

CX-004185: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

of Ion Transport Membrane Oxygen Technology for Integration in Integrated Gasification Combined Cycle and Advanced Power Generation Systems CX(s) Applied: B3.6 Date: 09272010...

22

CX-004172: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

of Ion Transport Membrane Oxygen Technology for Integration in Integrated Gasification Combined Cycle and Advanced Power Generation Systems CX(s) Applied: B3.6 Date: 09282010...

23

CX-004184: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

of Ion Transport Membrane Oxygen Technology for Integration in Integrated Gasification Combined Cycle and Advanced Power Generation Systems CX(s) Applied: B3.6 Date: 09272010...

24

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

of Ion Transport Membrane Oxygen Technology for Integration in Integrated Gasification Combined Cycle and Advanced Power Generation Systems CX(s) Applied: B3.6 Date: 09272010...

25

Integrated Computational Design, Development, Qualification and ...  

Science Conference Proceedings (OSTI)

Symposium, 1st World Congress on Integrated Computational Materials ... The benefits of applying an integrated approach to computational material design and ...

26

Advances in Integrated Computational Materials Design  

Science Conference Proceedings (OSTI)

Parametric materials design integrating materials science, applied mechanics and quantum physics within a systems engineering framework has brought a first ...

27

Applied Quantum Information Science  

Science Conference Proceedings (OSTI)

Applied Quantum Information Science. Summary: Theory is being developed and used to devise methods for preserving ...

2012-05-30T23:59:59.000Z

28

NREL: Technology Transfer - Apply Now for Energy-Efficient Housing ...  

Apply Now for Energy-Efficient Housing ... and NREL's Residential Buildings Research Web site to learn about systems integration and energy analysis ...

29

Essays in Applied Microeconomics  

E-Print Network (OSTI)

Emissions-eGRID Database . . . . . . . . . . . . . . . . . .Integrated Database (eGRID). (2010). eGRID2010: Version 1.1.cleanenergy/energy- resources/egrid. - Fowlie, Meredith L. (

Severnini, Edson Roberto

2013-01-01T23:59:59.000Z

30

CX-006878: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Determination CX-006878: Categorical Exclusion Determination Integrated Gasification Combined Cycle Affordability and Availability CX(s) Applied: A9 Date: 09302011...

31

CX-006877: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Determination CX-006877: Categorical Exclusion Determination Integrated Gasification Combined Cycle Affordability and Availability CX(s) Applied: A9 Date: 09302011...

32

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Download CX-000380: Categorical Exclusion Determination Sweeney Integrated Gasification Combined Cycle (IGCC)Carbon Capture and Sequestration Project - IGCC Plant CX(s) Applied:...

33

CX-010266: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CX-010266: Categorical Exclusion Determination South Table Mountain Energy Systems Integration Facility Hydrogen Fueling Station CX(s) Applied: B1.15 Date: 05082013...

34

CX-001448: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CX-001448: Categorical Exclusion Determination Systems Level Technology Development, Integration and Demonstration for Efficient Class 8 Trucks CX(s) Applied: B5.1 Date: 04012010...

35

CX-002349: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exclusion Determination CX-002349: Categorical Exclusion Determination Operations Systems Development and Integration CX(s) Applied: B1.7 Date: 05102010 Location(s):...

36

Categorical Exclusion Determinations: American Recovery and Reinvestme...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Office March 2, 2010 CX-001015: Categorical Exclusion Determination Integrated Direct Current (dc)-dc Conversion for Energy-Efficiency Multicore Microprocessors CX(s) Applied: A9,...

37

CX-002333: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exclusion Determination Smart Grid Regional Demonstration - Technology Solutions for Wind Integration - Phase I CX(s) Applied: A9 Date: 05112010 Location(s): Austin, Texas...

38

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Download CX-007402: Categorical Exclusion Determination Carolinas Offshore Wind Integration Case Study CX(s) Applied: A9 Date: 12082011 Location(s): North...

39

CX-010346: Categorical Exclusion Determination  

Energy.gov (U.S. Department of Energy (DOE))

Monroe Substation Integrated Project CX(s) Applied: B4.11 Date: 05/08/2013 Location(s): Washington Offices(s): Bonneville Power Administration

40

CX-003894: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exclusion Determination Advanced Integrated Gasification Combined CycleHydrogen Gas Turbine Development CX(s) Applied: B3.6 Date: 09102010 Location(s): Schenectady, New...

Note: This page contains sample records for the topic "integration cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

CX-003916: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Determination CX-003916: Categorical Exclusion Determination Integrated Automated Distributed Generation Technologies Demonstration Task 1 CX(s) Applied: A9, B3.6, B5.1...

42

CX-003286: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Determination CX-003286: Categorical Exclusion Determination Integrated Predictive Demand Response Controller CX(s) Applied: B5.1 Date: 08092010 Location(s): Milwaukee,...

43

CX-007697: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Categorical Exclusion Determination Autogrid, Inc. - Highly Dispatchable and Distributed Demand Response for the Integration of Distributed Generation CX(s) Applied: A9, B1.7...

44

CX-000725: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Determination CX-000725: Categorical Exclusion Determination A Novel Integrated Oxy-Combustion Flue Gas Purification Technology: A Near-Zero Emissions Pathway CX(s) Applied: A9,...

45

CX-000728: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Determination CX-000728: Categorical Exclusion Determination A Novel Integrated Oxy-Combustion Flue Gas Purification Technology: A Near-Zero Emissions Pathway CX(s) Applied: A9...

46

CX-000727: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Determination CX-000727: Categorical Exclusion Determination A Novel Integrated Oxy-Combustion Flue Gas Purification Technology: A Near-Zero Emissions Pathway CX(s) Applied: A9...

47

CX-000729: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Determination CX-000729: Categorical Exclusion Determination A Novel Integrated Oxy-Combustion Flue Gas Purification Technology: A Near-Zero Emissions Pathway CX(s) Applied: A9...

48

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exclusion Determination Advanced Integrated Gasification Combined CycleHydrogen Gas Turbine Development CX(s) Applied: B3.6 Date: 09102010 Location(s): Schenectady, New...

49

CX-007790: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Determination CX-007790: Categorical Exclusion Determination Hydroelectric Power Rate Increase for the Integrated System of Hydropower Projects CX(s) Applied: B4.3 Date:...

50

CX-009859: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CX-009859: Categorical Exclusion Determination Cost-Effective Treatment of Flowback and Produced Water via an Integrated Precipitative Supercritical Process CX(s) Applied: A9,...

51

Categorical Exclusion Determinations: National Energy Technology...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Smart Grid Regional Demonstration - Technology Solutions for Wind Integration - Phase I CX(s) Applied: A9 Date: 05112010 Location(s): Austin, Texas Office(s):...

52

CX-007998: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Categorical Exclusion Determination Integration of Stoltze Land and Lumber Biomass Generation CX(s) Applied: B1.7 Date: 02022012 Location(s): Montana Offices(s):...

53

CX-003345: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Categorical Exclusion Determination Integrated Renewable Energy and Campus Sustainability Initiative CX(s) Applied: A9 Date: 08122010 Location(s): Decorah, Iowa...

54

CX-004693: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CX-004693: Categorical Exclusion Determination Integrated Smart Distribution Research, Development and Demonstration Project CX(s) Applied: A9 Date: 12152010...

55

CX-006024: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Determination CX-006024: Categorical Exclusion Determination Wallowa County Integrated Biomass Energy Center CX(s) Applied: B5.1 Date: 05312011 Location(s): Wallowa...

56

CX-006230: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Determination CX-006230: Categorical Exclusion Determination Wallowa County Integrated Biomass Energy Center CX(s) Applied: B5.1 Date: 07182011 Location(s): Wallowa...

57

CX-005980: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Categorical Exclusion Determination CX-005980: Categorical Exclusion Determination Integrated Disposal Facility Fence Installation CX(s) Applied: B1.11 Date: 05242011...

58

CX-003287: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Categorical Exclusion Determination CX-003287: Categorical Exclusion Determination Integrated Building Management System CX(s) Applied: B5.1 Date: 08092010 Location(s):...

59

CX-002396: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exclusion Determination CX-002396: Categorical Exclusion Determination Montana Integrated Carbon to Liquids Technology (ICTL) Demonstration Program CX(s) Applied: B3.6 Date:...

60

CX-006974: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Determination Fully-Integrated Automotive Traction Inverter with Real-Time Switching Optimization CX(s) Applied: B3.6 Date: 09262011 Location(s): Colorado, Massachusetts,...

Note: This page contains sample records for the topic "integration cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Categorical Exclusion Determination Low-Cost Integrated Substrate for Organic Light-Emitting Diode (OLED) Lighting (Allison Park) CX(s) Applied: A2, A9 Date: 03192010...

62

North Carolina | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

December 8, 2011 CX-007402: Categorical Exclusion Determination Carolinas Offshore Wind Integration Case Study CX(s) Applied: A9 Date: 12082011 Location(s): North Carolina, South...

63

CX-007402: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exclusion Determination CX-007402: Categorical Exclusion Determination Carolinas Offshore Wind Integration Case Study CX(s) Applied: A9 Date: 12082011 Location(s): North...

64

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Categorical Exclusion Determination Integration of the University of Oregon's Cogeneration Project CX(s) Applied: B1.7 Date: 12012011 Location(s): Oregon Offices(s):...

65

Pennsylvania | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exclusion Determination Thermal Integration of Carbon Dioxide Compression Processes with Coal-Fired Power Plants Equipped with Carbon Capture CX(s) Applied: A9 Date: 12072009...

66

Categorical Exclusion Determinations: American Recovery and Reinvestme...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exclusion Determination Thermal Integration of Carbon Dioxide Compression Processes with Coal-Fired Power Plants Equipped with Carbon Capture CX(s) Applied: A9 Date: 12072009...

67

Categorical Exclusion Determinations: National Energy Technology...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Categorical Exclusion Determination Manufacturing Process for Organic Light-Emitting Diode (OLED) Integrated Substrate CX(s) Applied: B3.6 Date: 07302013 Location(s):...

68

CX-001308: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Categorical Exclusion Determination Low-Cost Integrated Substrate for Organic Light-Emitting Diode (OLED) Lighting (Allison Park) CX(s) Applied: A2, A9 Date: 03192010...

69

CX-010822: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Categorical Exclusion Determination Manufacturing Process for Organic Light-Emitting Diode (OLED) Integrated Substrate CX(s) Applied: B3.6 Date: 07302013 Location(s):...

70

CX-010824: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Categorical Exclusion Determination Manufacturing Process for Organic Light-Emitting Diode (OLED) Integrated Substrate CX(s) Applied: B3.6 Date: 07302013 Location(s):...

71

CX-010730: Categorical Exclusion Determination  

Energy.gov (U.S. Department of Energy (DOE))

Paisley Geothermal Integration CX(s) Applied: B1.7 Date: 08/09/2013 Location(s): Oregon Offices(s): Bonneville Power Administration

72

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Categorical Exclusion Determination San Diego Gas & Electric Borrego Springs Microgrid Demo (Utility Integration of Distributed Energy Storage Systems) CX(s) Applied: A1,...

73

CX-010782: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CX-010782: Categorical Exclusion Determination A Geomechanical Model for Gas Shales Based on Integration of Stress CX(s) Applied: A9 Date: 08212013 Location(s): Texas...

74

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Download CX-006469: Categorical Exclusion Determination A Geomechanical Model for Gas Shales Based on the Integration of Stress CX(s) Applied: A9, A11 Date: 08122011...

75

SOUTHVIEWDR Center for Applied  

E-Print Network (OSTI)

/Geology Chemistry Biological Sciences Geology Lab Bookstore Reed Milledge Payne Memorial Hall SANFORD DR Center CAES Activity Center Visitors Center (Four Towers) Greenhouses Center for Applied Isotope Study

Hall, Daniel

76

Applied Energy Programs  

NLE Websites -- All DOE Office Websites (Extended Search)

Applied Energy Programs Applied Energy Programs Applied Energy Programs Los Alamos is using its world-class scientific capabilities to enhance national energy security by developing energy sources with limited environmental impact and by improving the efficiency and reliability of the energy infrastructure. CONTACT US Acting Program Director Melissa Fox (505) 663-5538 Email Applied Energy Program Office serves as the hub connecting the Laboratory's scientific and technical resources to DOE sponsors, DoD programs, and to industry. The Applied Energy Program Office manages Los Alamos National Laboratory programs funded by the Department of Energy's (DOE's) Offices of Energy Efficiency/Renewable Energy, Electricity Delivery and Energy Reliability, and Fossil Energy. With energy use increasing across the nation and the

77

Essays in applied microeconomics  

E-Print Network (OSTI)

This dissertation consists of three chapters on topics in applied microeconomics. In the first chapter. I investigate whether voters are more likely to support additional spending on local public services when they perceive ...

Aron-Dine, Aviva

2012-01-01T23:59:59.000Z

78

Grid Integration  

SciTech Connect

Summarizes the goals and activities of the DOE Solar Energy Technologies Program efforts within its grid integration subprogram.

Not Available

2008-09-01T23:59:59.000Z

79

ELECTRONIC INTEGRATING CIRCUIT  

DOE Patents (OSTI)

An electronic integrating circuit using a transistor with a capacitor connected between the emitter and collector through which the capacitor discharges at a rate proportional to the input current at the base is described. Means are provided for biasing the base with an operating bias and for applying a voltage pulse to the capacitor for charging to an initial voltage. A current dividing diode is connected between the base and emitter of the transistor, and signal input terminal means are coupled to the juncture of the capacitor and emitter and to the base of the transistor. At the end of the integration period, the residual voltage on said capacitor is less by an amount proportional to the integral of the input signal. Either continuous or intermittent periods of integration are provided. (AEC)

Englemann, R.H.

1963-08-20T23:59:59.000Z

80

for Integrated Circuits IIS Erlangen; Department of Applied Electronics  

E-Print Network (OSTI)

Power management, temperature management, energy measurement and estimation, embedded systems, operating system architectures, distributed systems, machine learning

unknown authors

2006-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "integration cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

ENERY SMART SCHOOLS - APPLIED RESEARCH, FIELD TESTING, AND TECHNOLOGY INTEGRATION  

SciTech Connect

This multi-state collaborative project will coordinate federal, state, and private sector resources and high-priority school-related energy research under a comprehensive initiative that includes tasks that increase adoption of advanced energy efficiency high-performance technologies in both renovation of existing schools and building new ones; educate and inform school administrators, architects, engineers, and manufacturers nationwide as to the energy, economic, and environmental benefits of energy efficiency technologies; and improve the learning environment for the nation's students through use of better temperature controls, improvements in air quality, and increased daylighting in schools.

Kate Burke

2004-01-01T23:59:59.000Z

82

An integrated CAD methodology applied to wind turbine optimization  

E-Print Network (OSTI)

Modern engineering practice for designing physical products requires the creation of a CAD model of the design for documentation and manufacturing. As the design evolves from concept through to production, it is analyzed ...

Crawford, Curran A. (Curran Alexander), 1978-

2003-01-01T23:59:59.000Z

83

ENERGY SMART SCHOOLS - APPLIED RESEARCH, FIELD TESTING, AND TECHNOLOGY INTEGRATION  

SciTech Connect

This multi-state collaborative project will coordinate federal, state, and private sector resources and high-priority school-related energy research under a comprehensive initiative that includes tasks that increase adoption of advanced energy efficiency high-performance technologies in both renovation of existing schools and building new ones; educate and inform school administrators, architects, engineers, and manufacturers nationwide as to the energy, economic, and environmental benefits of energy efficiency technologies; and improve the learning environment for the nation's students through use of better temperature controls, improvements in air quality, and increased daylighting in schools.

Kate Burke

2004-01-01T23:59:59.000Z

84

ENERGY SMART SCHOOLS - APPLIED RESEARCH, FIELD TESTING, AND TECHNOLOGY INTEGRATION  

Science Conference Proceedings (OSTI)

This multi-state collaborative project brings together federal, state, and private sector resources in order to move the design and use of high-performance energy technologies in schools to the forefront. Projects within each task area have begun to show results. Recently, NETL representatives and NASEO met with all Task Project Managers to discuss the progress of each project. Each project began slowly due to several unforeseen obstacles, which have now been overcome. Some projects may require an extension to complete project to full extent. Most tasks are now running smoothly and have or will soon acquire results.

Frank Bishop

2003-01-01T23:59:59.000Z

85

ENERGY SMART SCHOOLS APPLIED RESEARCH, FIELD TESTING, AND TECHNOLOGY INTEGRATION  

SciTech Connect

This multi-state collaborative project brings together federal, state, and private sector resources in order to move the design and use of high-performance energy technologies in schools to the forefront. NASEO and its contractors continue to make progress on completion of the statement of work. The high watermark for this period is the installation and operation of the micro-turbine in the Canton School District. The school is pleased to begin the monitoring phase of the project and looks forward to a ribbon cutting this Spring. The other projects continue to move forward and NYSERDA has now begun work in earnest. We expect the NASEO/NYSERDA workshop sometime this Spring as well. By the time the next Annual Technical Progress Report is submitted, we plan to have finished all of the work. The next year should be filled with dissemination of information to interested parties on the success of the project in an effort to get others to duplicate the high performance, and energy smart schools initiatives. We expect all of the deliverables to be completed with the possible exception of the high-performance schools retrofits in California. We expect that 2 of the 3 campuses undergoing retrofits will be complete and the third will be nearly complete. All other activities are on schedule for 10/1/03 completion at this time.

Frank Bishop

2003-04-01T23:59:59.000Z

86

Applied Mathematics | Argonne National Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

Applied Mathematics Applied Mathematics Our work in applied mathematics ranges from algorithm design, to development of software tools and technology, to advanced simulations in...

87

Applied Science/Techniques  

NLE Websites -- All DOE Office Websites (Extended Search)

Applied Science/Techniques Applied Science/Techniques Applied Science/Techniques Print The ALS is an excellent incubator of new scientific techniques and instrumentation. Many of the technical advances that make the ALS a world-class soft x-ray facility are developed at the ALS itself. The optical components in use at the ALS-mirrors and lenses optimized for x-ray wavelengths-require incredibly high-precision surfaces and patterns (often formed through extreme ultraviolet lithography at the ALS) and must undergo rigorous calibration and testing provided by beamlines and equipment from the ALS's Optical Metrology Lab and Berkeley Lab's Center for X-Ray Optics. New and/or continuously improved experimental techniques are also a crucial element of a thriving scientific facility. At the ALS, examples of such "technique" highlights include developments in lensless imaging, soft x-ray tomography, high-throughput protein analysis, and high-power coherent terahertz radiation.

88

Integrals for IBS and beam cooling  

SciTech Connect

Simulation of beam cooling usually requires performing certain integral transformations every time step or so, which is a significant burden on the CPU. Examples are the dispersion integrals (Hilbert transforms) in the stochastic cooling, wake fields and IBS integrals. An original method is suggested for fast and sufficiently accurate computation of the integrals. This method is applied for the dispersion integral. Some methodical aspects of the IBS analysis are discussed.

Burov, A.; /Fermilab

2005-01-01T23:59:59.000Z

89

Insolation integrator  

DOE Patents (OSTI)

An electric signal representative of the rate of insolation is integrated to determine if it is adequate for operation of a solar energy collection system.

Dougherty, John J. (Norristown, PA); Rudge, George T. (Lansdale, PA)

1980-01-01T23:59:59.000Z

90

Navigating without vision: Basic and applied research  

E-Print Network (OSTI)

ABSTRACT: We describe some of the results of our program of basic and applied research on navigating without vision. One basic research topic that we have studied extensively is path integration, a form of navigation in which perceived self-motion is integrated over time to obtain an estimate of current posilion and orientation. In experiments on pathway completion, one test of path integration ability, we have found that subjects who are passively guided over the outbound path without vision exhibit significant errors when attempting to return to the origin but are nevertheless sensitive to turns and segment lengths in the stimulus path. We have also found no major differences in path inlegration ability among blirid and sighted populations. A model we havc developed that attributes errors in path integration to errors in encoding the stimulus path is a good beginning toward understanding path integration performance. In otber research on path integration, in which optic flow information was manipulated in addition to the proprioceptive and vestibular information of nonvisual locomotion, we havc found that optic flow is a weak input to the path integration process. In other basic research, our studies of auditory distance perception in outdoor environments show systematic underestimation oC sound source distance. Our applied research has been concerned with developing and evaluating a navigation system for the visually impaired that uses three recent technologies: the Global Positioning System, Geographic Information Systems, and virtual acouslics. Our work shows that there is considerable promise of these three technologies in allowing visually impaired individuals to navigate and learn about unfamiliar environments without the assistance of human guides. (Optoni Vis Sci 2001;78:282-289)

Jack M. Loomis; Roberta L. Klatzky; Reginald G. Golledge

2001-01-01T23:59:59.000Z

91

Applied Science/Techniques  

NLE Websites -- All DOE Office Websites (Extended Search)

Applied Science/Techniques Print Applied Science/Techniques Print The ALS is an excellent incubator of new scientific techniques and instrumentation. Many of the technical advances that make the ALS a world-class soft x-ray facility are developed at the ALS itself. The optical components in use at the ALS-mirrors and lenses optimized for x-ray wavelengths-require incredibly high-precision surfaces and patterns (often formed through extreme ultraviolet lithography at the ALS) and must undergo rigorous calibration and testing provided by beamlines and equipment from the ALS's Optical Metrology Lab and Berkeley Lab's Center for X-Ray Optics. New and/or continuously improved experimental techniques are also a crucial element of a thriving scientific facility. At the ALS, examples of such "technique" highlights include developments in lensless imaging, soft x-ray tomography, high-throughput protein analysis, and high-power coherent terahertz radiation.

92

New and Underutilized Technology: Integrated Daylighting Systems |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Integrated Daylighting Systems Integrated Daylighting Systems New and Underutilized Technology: Integrated Daylighting Systems October 4, 2013 - 4:56pm Addthis The following information outlines key deployment considerations for integrated daylighting systems within the Federal sector. Benefits Integrated daylighting systems can be combined with electronic dimmable fluorescent ballasts, photo sensors, and occupancy sensors where appropriate. Network components, workstation controls, and building management options can also be integrated to provide significant savings on applied systems. Application Integrated daylighting systems are applicable in perimeter and interior spaces with daylight exposure via windows and skylights. Key Factors for Deployment Acceptable levels of daylight are required and must be factored into

93

Applied antineutrino physics workshop.  

Science Conference Proceedings (OSTI)

This workshop is the fourth one of a series that includes the Neutrino Geophysics Conference at Honolulu, Hawaii, which I attended in 2005. This workshop was organized by the Astro-Particle and Cosmology laboratory in the recently opened Condoret building of the University of Paris. More information, including copies of the presentations, on the workshop is available on the website: www.apc.univ-paris7.fr/AAP2007/. The workshop aims at opening neutrino physics to various fields such that it can be applied in geosciences, nuclear industry (reactor and spent fuel monitoring) and non-proliferation. The workshop was attended by over 60 people from Europe, USA, Asia and Brazil. The meeting was also attended by representatives of the Comprehensive nuclear-Test Ban Treaty (CTBT) and the International Atomic Energy Agency (IAEA). The workshop also included a workshop dinner on board of a river boat sailing the Seine river.

Lund, James C.

2008-01-01T23:59:59.000Z

94

NREL: Energy Systems Integration - Integrated Deployment Workshop  

NLE Websites -- All DOE Office Websites (Extended Search)

Integrated Deployment Workshop Integrated Deployment Workshop The Energy Systems Integration Facility workshop, Integrated Deployment, was held August 21 - 23, 2012 at the National Renewable Energy Laboratory in Golden, Colorado. Each day of the workshop, which included a tour of the Energy Systems Integration Facility, focused on a different topic: Day 1: Utility-Scale Renewable Integration Day 2: Distribution-Level Integration Day 3: Isolated and Islanded Grid Systems The agenda and presentations from the workshop are below. Agenda Energy Systems Integration Facility Overview ESIF Technology Partnerships Integrated Deployment Model Integrated Deployment and the Energy Systems Integration Facility: Workshop Proceedings Printable Version Energy Systems Integration Home Research & Development

95

NREL: Energy Systems Integration - Energy Systems Integration...  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Systems Integration Facility NREL's Energy Systems Integration Facility Garners LEED Platinum View the NREL Press Release. NREL's multistory Energy Systems Integration...

96

Applied and Computational Mathematics Division  

Science Conference Proceedings (OSTI)

Applied and Computational Mathematics Division. Topic Areas. Mathematics; Scientific Computing; Visualization; Quantum Computing. ...

2013-05-09T23:59:59.000Z

97

integr~1  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

7 7 AUDIT REPORT THE U.S. DEPARTMENT OF ENERGY' S MANAGEMENT OF RESEARCH AND DEVELOPMENT INTEGRATION MARCH 1998 U.S. DEPARTMENT OF ENERGY OFFICE OF INSPECTOR GENERAL OFFICE OF AUDIT SERVICES DEPARTMENT OF ENERGY Washington, DC 20585 MEMORANDUM FOR THE SECRETARY FROM: Gregory H. Friedman Principal Deputy Inspector General SUBJECT: INFORMATION : Audit Report on "Audit of the Department of Energy's Management of Research and Development Integration" BACKGROUND The Congress, independent task forces, and advisory groups have pointed out the need for the Department to improve its integration of research and development (R&D) projects. In the past, R&D management was carried out by different program offices with the research being

98

Integrated System  

NLE Websites -- All DOE Office Websites (Extended Search)

Integrated Window System Our research activities in the field of high performance windows have led us to conclude that even by using high performance insulating glass units, low conductivity frames, and warm edge spacers, there are still untapped sources for improving energy efficiency in the design and use of residential windows. While such high performance windows are a dramatic improvement over conventional units, they do not reduce conductive losses through wall framing around the window, offer guarantees against excessive wall/window infiltration nor do they adapt to the daily and seasonal potentials for night insulation and summer shading. To meet this need, we have been working on the design, development, and prototyping of Integrated Window Systems (IWS) since 1993. Integrated Window Systems are a form of panelized construction where the wall panel includes an operable or fixed window sash, recessed night insulation, integral solar shading, and is built in a factory setting in order to minimize thermal short circuits and infiltration at joints. IWSs can be built in modular lengths to facilitate their installation with conventional wood frame stick construction or other forms of panelized construction.

99

CX-004188: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

of Ion Transport Membrane Oxygen Technology for Integration in Integrated Gasification Combined Cycle and Advanced Power Generation Systems CX(s) Applied: A9, B3.6 Date: 0927...

100

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

of Ion Transport Membrane Oxygen Technology for Integration in Integrated Gasification Combined Cycle and Advanced Power Generation Systems CX(s) Applied: A9, B3.6 Date: 0927...

Note: This page contains sample records for the topic "integration cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Applied Optoelectronics | Open Energy Information  

Open Energy Info (EERE)

optical semiconductor devices, packaged optical components, optical subsystems, laser transmitters, and fiber optic transceivers. References Applied Optoelectronics1...

102

Integrating the Integrators - A Roadmap to Success  

SciTech Connect

The U.S. Department of Energy Environmental Management's (DOE-EM) investments in science and technology, as well as science and technology investments associated with other parts of the DOE are aimed at meeting the Departments cleanup goals. These investments, primarily focused on EM's cleanup mission, comprise the Environmental Quality Research and Development (R&D) portfolios. Synchronizing EM's Cleanup Project Managers (operations facility and process owners throughout the DOE complex) operational needs with EM R&D including the extensive work of the six Focus Areas (major thrust areas within DOE-EM) has been a continuing challenge. This recent initiative to better integrate the R&D program is in response to evolving needs within the Department to apply proven system engineering methods to clarify requirements and define EM's process to effectively orchestrate their R&D Program. To optimize this partnership, DOE-EM's Integration Program is successfully unifying the operational needs with the R&D as described in this paper.

Olson, Craig Stott; Conner, Craig C

1999-03-01T23:59:59.000Z

103

Integrating the Integrators - A Roadmap to Success  

SciTech Connect

The U.S. Department of Energy Environmental Management's (DOE-EM) investments in science and technology, as well as science and technology investments associated with other parts of the DOE are aimed at meeting the Departments cleanup goals. These investments, primarily focused on EM's cleanup mission, comprise the Environmental Quality Research and Development (R&D) portfolios. Synchronizing EM's Cleanup Project Managers (operations facility and process owners throughout the DOE complex) operational needs with EM R&D including the extensive work of the six Focus Areas (major thrust areas within DOE-EM) has been a continuing challenge. This recent initiative to better integrate the R&D program is in response to evolving needs within the Department to apply proven systems engineering methods to clarify requirements and define EM's process to effectively orchestrate their R&D Program. To optimize this partnership, DOE-EM's Integration Program is successfully unifying the operational needs with the R&D as described in this paper.

C. Conner; C. Olson

1999-02-01T23:59:59.000Z

104

NFRC Procedures for Applied Films  

NLE Websites -- All DOE Office Websites (Extended Search)

Applied Films Applied Films Last update: 12/10/2013 07:29 PM NFRC now has a procedure for adding applied films to substrates in Optics5 and importing those applied film constructions into WINDOW5 to be used in a whole product calculation. The information presented below is provided to help simulators with this process. Feel free to contact us at WINDOWHelp@lbl.gov with questions or comments. NFRC Applied Film Procedure Applied Film Procedures (approved by NFRC) (PDF file) Approved Applied Film List (IGDB 33.0) (PDF file) NFRC Laminate Procedure Training Powerpoint with Examples (This Powerpoint presentation was used in the NFRC web based training sessions in December 2006 and January 2007) PowerPoint Presentation (PPT file) PowerPoint Presentation (PDF file) Help and Troubleshooting

105

Functional Integration on Constrained Function Spaces  

E-Print Network (OSTI)

Analogy with Bayesian inference is used to study constrained physical systems within the context of functional integration. Since functional integrals probe function spaces, both kinematical and dynamical constraints are treated simultaneously and on equal footing. Following the analogy, functional counterparts of conditional and conjugate probability distributions are introduced for integrators and then applied to some well-known examples of constrained functional integrals. The analysis leads to some new functional integration tools and methods. These are utilized to construct a model of the prime counting function as a constrained gamma process.

J. LaChapelle

2012-12-03T23:59:59.000Z

106

KCP wins technology award for security integration | National...  

National Nuclear Security Administration (NNSA)

Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Home > NNSA Blog > KCP wins technology award for security integration KCP wins technology...

107

NREL: Energy Systems Integration - Energy Systems Integration...  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Systems Integration Facility Newsroom The Energy Systems Integration Facility (ESIF) will be one of the only megawatt-scale test facilities in the United States that...

108

NREL: Transmission Grid Integration - Solar Integration National...  

NLE Websites -- All DOE Office Websites (Extended Search)

of the Western Wind and Solar Integration Study and Eastern Wind Integration and Transmission Study datasets greatly advanced the modeling of wind and solar power production...

109

NREL: Transmission Grid Integration - Wind Integration Datasets  

NLE Websites -- All DOE Office Websites (Extended Search)

Wind Integration Datasets The Wind Integration Datasets provide energy professionals with a consistent set of wind profiles for the eastern United States and the western United...

110

Generative Design Systems Applied to Low-Energy Buildings  

NLE Websites -- All DOE Office Websites (Extended Search)

Generative Design Systems Applied to Low-Energy Buildings Generative Design Systems Applied to Low-Energy Buildings Speaker(s): Maria Luisa de Oliveira Gama Caldas Date: March 15, 2012 - 12:00pm Location: 90-3122 Seminar Host/Point of Contact: Paul Mathew Generative Design Systems (GDS) represent a step beyond parametric models, integrating design goals, building simulations and shape generation. In this seminar, present and future research projects on the application of different GDS to low-energy buildings are discussed. The software GENE_ARCH integrates energy simulations with multicriteria search methods such as pareto genetic algorithms, to locate acceptable alternatives that move the current design towards performance goals set by the user. DIVA, a system that integrates parametric geometrical modeling with Radiance, Daysim and

111

Integrated Codes | National Nuclear Security Administration  

NLE Websites -- All DOE Office Websites (Extended Search)

Integrated Codes | National Nuclear Security Administration Integrated Codes | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog IC Integrated Codes Home > About Us > Our Programs > Defense Programs > Future Science & Technology Programs > Office of Advanced Simulation and Computing and Institutional R&D Programs > ASC Program Elements > Integrated Codes

112

Gated integrator with signal baseline subtraction  

DOE Patents (OSTI)

An ultrafast, high precision gated integrator includes an opamp having differential inputs. A signal to be integrated is applied to one of the differential inputs through a first input network, and a signal indicative of the DC offset component of the signal to be integrated is applied to the other of the differential inputs through a second input network. A pair of electronic switches in the first and second input networks define an integrating period when they are closed. The first and second input networks are substantially symmetrically constructed of matched components so that error components introduced by the electronic switches appear symmetrically in both input circuits and, hence, are nullified by the common mode rejection of the integrating opamp. The signal indicative of the DC offset component is provided by a sample and hold circuit actuated as the integrating period begins. The symmetrical configuration of the integrating circuit improves accuracy and speed by balancing out common mode errors, by permitting the use of high speed switching elements and high speed opamps and by permitting the use of a small integrating time constant. The sample and hold circuit substantially eliminates the error caused by the input signal baseline offset during a single integrating window.

Wang, Xucheng (Lisle, IL)

1996-01-01T23:59:59.000Z

113

Gated integrator with signal baseline subtraction  

DOE Patents (OSTI)

An ultrafast, high precision gated integrator includes an opamp having differential inputs. A signal to be integrated is applied to one of the differential inputs through a first input network, and a signal indicative of the DC offset component of the signal to be integrated is applied to the other of the differential inputs through a second input network. A pair of electronic switches in the first and second input networks define an integrating period when they are closed. The first and second input networks are substantially symmetrically constructed of matched components so that error components introduced by the electronic switches appear symmetrically in both input circuits and, hence, are nullified by the common mode rejection of the integrating opamp. The signal indicative of the DC offset component is provided by a sample and hold circuit actuated as the integrating period begins. The symmetrical configuration of the integrating circuit improves accuracy and speed by balancing out common mode errors, by permitting the use of high speed switching elements and high speed opamps and by permitting the use of a small integrating time constant. The sample and hold circuit substantially eliminates the error caused by the input signal baseline offset during a single integrating window. 5 figs.

Wang, X.

1996-12-17T23:59:59.000Z

114

Building-integrated photovoltaics  

SciTech Connect

This is a study of the issues and opportunities for building-integrated PV products, seen primarily from the perspective of the design community. Although some quantitative analysis is included, and limited interviews are used, the essence of the study is qualitative and subjective. It is intended as an aid to policy makers and members of the technical community in planning and setting priorities for further study and product development. It is important to remember that the success of a product in the building market is not only dependent upon its economic value; the diverse group of building owners, managers, regulators, designers, tenants and users must also find it practical, aesthetically appealing and safe. The report is divided into 11 sections. A discussion of technical and planning considerations is followed by illustrative diagrams of different wall and roof assemblies representing a range of possible PV-integration schemes. Following the diagrams, several of these assemblies are then applied to a conceptual test building which is analyzed for PV performance. Finally, a discussion of mechanical/electrical building products incorporating PVs is followed by a brief surveys of cost issues, market potential and code implications. The scope of this report is such that most of the discussion does not go beyond stating the questions. A more detailed analysis will be necessary to establish the true costs and benefits PVs may provide to buildings, taking into account PV power revenue, construction costs, and hidden costs and benefits to building utility and marketability.

1993-01-01T23:59:59.000Z

115

Vehicle Technologies Office: Applied Battery Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Applied Battery Research to someone by E-mail Share Vehicle Technologies Office: Applied Battery Research on Facebook Tweet about Vehicle Technologies Office: Applied Battery...

116

BNL | Accelerators for Applied Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Accelerators for Applied Research Accelerators for Applied Research Brookhaven National Lab operates several accelerator facilities dedicated to applied research. These facilities directly address questions and concerns on a tremendous range of fields, including medical imaging, cancer therapy, computation, and space exploration. Leading scientists lend their expertise to these accelerators and offer crucial assistant to collaborating researchers, pushing the limits of science and technology. Interested in gaining access to these facilities for research? See the contact number listed for each facility. RHIC tunnel Brookhaven Linac Isotope Producer The Brookhaven Linac Isoptope Producer (BLIP)-positioned at the forefront of research into radioisotopes used in cancer treatment and diagnosis-produces commercially unavailable radioisotopes for use by the

117

Integrated Designs to Integrated Operations using BMS  

NLE Websites -- All DOE Office Websites (Extended Search)

Integrated Designs to Integrated Operations using BMS Speaker(s): Punit Desai Date: February 6, 2013 - 12:15pm Location: 90-3122 Seminar HostPoint of Contact: Girish Ghatikar The...

118

CRC handbook of applied thermodynamics  

Science Conference Proceedings (OSTI)

The emphasis of this book is on applied thermodynamics, featuring the stage of development of a process rather than the logical development of thermodynamic principles. It is organized according to the types of problems encountered in industry, such as probing research, process assessment, and process development. The applied principles presented can be used in most areas of industry including oil and gas production and processing, chemical processing, power generation, polymer production, food processing, synthetic fuels production, specialty chemicals and pharmaceuticals production, bioengineered processes, etc.

Palmer, D.A. (Amoco Chemical Corp., Naperville, IL (USA). Research and Development Dept.)

1987-01-01T23:59:59.000Z

119

NREL: Technology Deployment - Integrated Deployment Model  

NLE Websites -- All DOE Office Websites (Extended Search)

Integrated Deployment Model Integrated Deployment Model NREL's integrated deployment model provides a framework to focus on the national goal of accelerating market adoption of clean energy technologies through local efforts. With support from the U.S. Department of Energy (DOE), NREL developed and applies the integrated deployment model to select projects including disaster recovery, statewide activities, federal agency support, island activities, and community renewable energy deployment. How the Model Works To address the complex challenges of multi-technology, multi-stakeholder, and multi-fuel deployment, NREL created the integrated deployment model to support each technology area separately but also consider the integration points between the technologies. NREL also identifies the cross-cutting

120

California Energy Commission Apply Today!  

E-Print Network (OSTI)

photovoltaic project in the future. Peak Demand Savings: 95 kW Energy Savings: 1,510,849 kWh Annual Energy CostCalifornia Energy Commission Apply Today! "The College implemented all of the recommended projects Programs Office (916) 654-4147 pubprog@energy.state.ca.us "CEC financing allowed us to install many

Note: This page contains sample records for the topic "integration cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

implementing bioenergy applied research & development  

E-Print Network (OSTI)

1 A Northern Centre for Renewable Energy implementing bioenergy applied research & development plant measures to become carbon neutral and operate on renewable energy. UNBC is uniquely positioned for Climate Solutions, and UNBC. The Green University Centre will be a model of energy efficiency

Northern British Columbia, University of

122

CX-000380: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Categorical Exclusion Determination Sweeney Integrated Gasification Combined Cycle (IGCC)Carbon Capture and Sequestration Project - IGCC Plant CX(s) Applied: A1, A9, B3.1 Date:...

123

CX-006485: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CX-006485: Categorical Exclusion Determination Operations Systems Development and Integration CX(s) Applied: B1.7, B4.6 Date: 07212011 Location(s): Amarillo, Texas Office(s):...

124

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Categorical Exclusion Determination Low-Cost Integrated Substrate for Organic Light-Emitting Diode (OLED) Lighting (Monroeville) CX(s) Applied: B3.6 Date: 03192010 Location(s):...

125

CX-003699: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exclusion Determination Multi-Level Energy Storage and Controls for Large-Scale Wind Energy Integration CX(s) Applied: A9, B3.6 Date: 09162010 Location(s): Colorado...

126

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Determination Recovery Act: Multi-level Energy Storage and Controls for Large-scale Wind Energy Integration CX(s) Applied: A9, B3.6 Date: 12172009 Location(s): Tennessee...

127

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exclusion Determination Smart Grid Regional Demonstration - Technology Solutions for Wind Integration - Phase II CX(s) Applied: B1.19, B4.6, B5.1 Date: 05112010 Location(s):...

128

CX-002336: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exclusion Determination Smart Grid Regional Demonstration - Technology Solutions for Wind Integration - Phase II CX(s) Applied: B1.19, B4.6, B5.1 Date: 05112010 Location(s):...

129

CX-000244: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Determination Recovery Act: Multi-level Energy Storage and Controls for Large-scale Wind Energy Integration CX(s) Applied: A9, B3.6 Date: 12172009 Location(s): Tennessee...

130

Categorical Exclusion Determinations: B4.6 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exclusion Determination Smart Grid Regional Demonstration - Technology Solutions for Wind Integration - Phase II CX(s) Applied: B1.19, B4.6, B5.1 Date: 05112010 Location(s):...

131

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CX-007365: Categorical Exclusion Determination Integration of the Green Lane Energy Biogas Generator CX(s) Applied: B1.7 Date: 11172011 Location(s): Oregon Offices(s):...

132

CX-008516: Categorical Exclusion Determination  

Energy.gov (U.S. Department of Energy (DOE))

Effects of Fiber Rope - Seabed Contact on Subsequent Rope Integrity CX(s) Applied: A9, B3.6 Date: 07/13/2012 Location(s): Texas Offices(s): National Energy Technology Laboratory

133

CX-001798: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Categorical Exclusion Determination Subtask 4.12 - Algae Harvesting in an Integrated Power Plant-Algae System CX(s) Applied: B3.6 Date: 04202010 Location(s): Grand Forks, North...

134

CX-010149: Categorical Exclusion Determination  

Energy.gov (U.S. Department of Energy (DOE))

Integration of the Port of Tillamook Bay Generating Facility CX(s) Applied: B1.7 Date: 04/15/2013 Location(s): Oregon Offices(s): Bonneville Power Administration

135

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Integration - Phase II CX(s) Applied: B1.19, B4.6, B5.1 Date: 05112010 Location(s): Austin, Texas Office(s): Electricity Delivery and Energy Reliability, National Energy...

136

CX-006771: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CX-006771: Categorical Exclusion Determination Coal-Based Integrated Gasification Fuel Cell Project: Phase II CX(s) Applied: B3.6 Date: 09162011 Location(s): Brighton, New York...

137

CX-006770: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CX-006770: Categorical Exclusion Determination Coal-Based Integrated Gasification Fuel Cell Project: Phase II CX(s) Applied: B3.6 Date: 09162011 Location(s): South Windsor,...

138

CX-006773: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CX-006773: Categorical Exclusion Determination Coal-Based Integrated Gasification Fuel Cell Project: Phase II CX(s) Applied: B3.6 Date: 09162011 Location(s): Richland,...

139

CX-006772: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CX-006772: Categorical Exclusion Determination Coal-Based Integrated Gasification Fuel Cell Project: Phase II CX(s) Applied: B3.6 Date: 09162011 Location(s): Fenton Township,...

140

Categorical Exclusion Determinations: National Energy Technology...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

13, 2010 CX-000726: Categorical Exclusion Determination A Novel Integrated Oxy-Combustion Flue Gas Purification Technology: A Near-Zero Emissions Pathway CX(s) Applied: B3.6...

Note: This page contains sample records for the topic "integration cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

CX-000726: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Determination CX-000726: Categorical Exclusion Determination A Novel Integrated Oxy-Combustion Flue Gas Purification Technology: A Near-Zero Emissions Pathway CX(s) Applied: B3.6...

142

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CX-007998: Categorical Exclusion Determination Integration of Stoltze Land and Lumber Biomass Generation CX(s) Applied: B1.7 Date: 02022012 Location(s): Montana Offices(s):...

143

CX-010473: Categorical Exclusion Determination  

Energy.gov (U.S. Department of Energy (DOE))

An Integrated Study on a Novel High Temperature High Entropy Alloy CX(s) Applied: B3.6 Date: 06/03/2013 Location(s): Louisiana Offices(s): National Energy Technology Laboratory

144

CX-010472: Categorical Exclusion Determination  

Energy.gov (U.S. Department of Energy (DOE))

An Integrated Study on a Novel High Temperature High Entropy Alloy CX(s) Applied: B3.6 Date: 06/03/2013 Location(s): Louisiana Offices(s): National Energy Technology Laboratory

145

Illinois | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Determination Solazyme Integrated Biorefinery (SzIBR): Diesel Fuels from Heterotrophic Algae CX(s) Applied: A9, B3.6 Date: 04122011 Location(s): Peoria, Illinois Office(s):...

146

North Dakota | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energy April 20, 2010 CX-001798: Categorical Exclusion Determination Subtask 4.12 - Algae Harvesting in an Integrated Power Plant-Algae System CX(s) Applied: B3.6 Date: 0420...

147

CX-006075: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Categorical Exclusion Determination Integrated Renewable Energy and Campus Sustainability Initiative CX(s) Applied: A9, B3.6, B5.1 Date: 06282011 Location(s): Luther...

148

CX-004650: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Categorical Exclusion Determination CX-004650: Categorical Exclusion Determination Integrated Whole Building Energy Diagnostics CX(s) Applied: A9, B2.2, B5.1 Date: 12092010...

149

CX-007739: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exclusion Determination University of Colorado - Boulder - Wafer-Level Sub-Module Integrated DCDC Converter CX(s) Applied: A9, B3.6 Date: 11302011 Location(s): Colorado,...

150

CX-009444: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CX-009444: Categorical Exclusion Determination Roots Air Management System with Integrated Expander CX(s) Applied: A9, B3.6 Date: 06292012 Location(s): Wisconsin Offices(s):...

151

CX-010226: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Determination CX-010226: Categorical Exclusion Determination Energy Efficient Integrated Fiber-Reinforced Polymer-confined Sandwich Roof System CX(s) Applied: A9, B3.6, B5.1...

152

CX-004641: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Categorical Exclusion Determination CX-004641: Categorical Exclusion Determination Integrated Whole Building Energy Diagnostics CX(s) Applied: A9, B2.2, B5.1 Date: 12092010...

153

Tennessee | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Determination Scale-Up of Hydrogen Transport Membranes (HTM) for Integrated Gasification Combined Cycle (IGCC) and FutureGen Coal-to-Hydrogen Plants (Kingsport) CX(s) Applied:...

154

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Determination Scale-Up of Hydrogen Transport Membranes (HTM) for Integrated Gasification Combined Cycle (IGCC) and FutureGen Coal-to-Hydrogen Plants (Boulder) CX(s) Applied: B3.6...

155

Oregon | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Technologies Wave Park Generation Integration CX(s) Applied: B1.7, B4.6 Date: 06272011 Location(s): Douglas County, Oregon Office(s): Bonneville Power Administration June 21,...

156

CX-004476: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exclusion Determination Testing of Indian Coal in a Transport Reactor Integrated Gasification (TRIG) System CX(s) Applied: B3.6 Date: 11182010 Location(s): Grand Forks, North...

157

CX-004662: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exclusion Determination Testing of Chinese Coal in a Transport Reactor Integrated Gasification (TRIG) System CX(s) Applied: B3.6 Date: 12092010 Location(s): Grand Forks, North...

158

Categorical Exclusion (CX) Determinations By Date | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Categorical Exclusion Determination Low-Cost Integrated Substrate for Organic Light-Emitting Diode (OLED) Lighting (Ewing) CX(s) Applied: B3.6 Date: 03192010 Location(s):...

159

Categorical Exclusion Determinations: National Energy Technology...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Categorical Exclusion Determination Low-Cost Integrated Substrate for Organic Light-Emitting Diode (OLED) Lighting (Ewing) CX(s) Applied: B3.6 Date: 03192010 Location(s):...

160

CX-008292: Categorical Exclusion Determination  

Energy.gov (U.S. Department of Energy (DOE))

Waste Heat Integration with Solvent Process for More Efficient Carbon Dioxide Removal from Coal-Fired Flue Gas CX(s) Applied: A11 Date: 04/27/2012 Location(s): Texas Offices(s): National Energy Technology Laboratory

Note: This page contains sample records for the topic "integration cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Categorical Exclusion Determination Low-Cost Integrated Substrate for Organic Light-Emitting Diode (OLED) Lighting (Harmar) CX(s) Applied: B3.6 Date: 03192010 Location(s):...

162

CX-010821: Categorical Exclusion Determination  

Energy.gov (U.S. Department of Energy (DOE))

Manufacturing Process for Organic Light-Emitting Diode (OLED) Integrated Substrate CX(s) Applied: B3.6 Date: 07/30/2013 Location(s): Pennsylvania Offices(s): National Energy Technology Laboratory

163

CX-001310: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Categorical Exclusion Determination Low-Cost Integrated Substrate for Organic Light-Emitting Diode (OLED) Lighting (Ewing) CX(s) Applied: B3.6 Date: 03192010 Location(s):...

164

CX-001309: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Categorical Exclusion Determination Low-Cost Integrated Substrate for Organic Light-Emitting Diode (OLED) Lighting (Monroeville) CX(s) Applied: B3.6 Date: 03192010 Location(s):...

165

CX-010823: Categorical Exclusion Determination  

Energy.gov (U.S. Department of Energy (DOE))

Manufacturing Process for Organic Light-Emitting Diode (OLED) Integrated Substrate CX(s) Applied: B3.6 Date: 07/30/2013 Location(s): Pennsylvania Offices(s): National Energy Technology Laboratory

166

CX-001307: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Categorical Exclusion Determination Low-Cost Integrated Substrate for Organic Light-Emitting Diode (OLED) Lighting (Harmar) CX(s) Applied: B3.6 Date: 03192010 Location(s):...

167

Connecticut | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

16, 2011 CX-006770: Categorical Exclusion Determination Coal-Based Integrated Gasification Fuel Cell Project: Phase II CX(s) Applied: B3.6 Date: 09162011 Location(s): South...

168

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Download CX-006772: Categorical Exclusion Determination Coal-Based Integrated Gasification Fuel Cell Project: Phase II CX(s) Applied: B3.6 Date: 09162011 Location(s):...

169

CX-008169: Categorical Exclusion Determination  

Energy.gov (U.S. Department of Energy (DOE))

Integration of the Echo Point Community Wind Generation Project CX(s) Applied: B1.7 Date: 03/20/2012 Location(s): Oregon Offices(s): Bonneville Power Administration

170

CX-010444: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Determination Technology Integration Program - Field Trial Site Two - Eagle Ford Shale, DeWitt County, Texas CX(s) Applied: A9, B3.1, B3.6 Date: 06192013 Location(s):...

171

CX-010194: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Technology Integration Program Phase II Field Trial: Site One - Eagle Ford Shale CX(s) Applied: B3.11 Date: 04152013 Location(s): Texas Offices(s): National Energy...

172

CX-009432: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Transformational Approach to Reducing the Total System Costs of Building Integrated Photovoltaics CX(s) Applied: A9, B5.15 Date: 11072012 Location(s): Michigan Offices(s): Golden...

173

CX-010429: Categorical Exclusion Determination  

Energy.gov (U.S. Department of Energy (DOE))

Harbour Pointe Small Generator Integration CX(s) Applied: B1.7 Date: 06/25/2013 Location(s): Washington, Washington Offices(s): Bonneville Power Administration

174

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Download CX-010781: Categorical Exclusion Determination A Geomechanical Model for Gas Shales Based on Integration of Stress CX(s) Applied: A9, A11, B3.6 Date: 08212013...

175

CX-010781: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CX-010781: Categorical Exclusion Determination A Geomechanical Model for Gas Shales Based on Integration of Stress CX(s) Applied: A9, A11, B3.6 Date: 08212013...

176

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Download CX-010782: Categorical Exclusion Determination A Geomechanical Model for Gas Shales Based on Integration of Stress CX(s) Applied: A9 Date: 08212013 Location(s): Texas...

177

Texas | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

and Integration CX(s) Applied: B1.7, B4.6 Date: 07212011 Location(s): Amarillo, Texas Office(s): Pantex Site Office July 20, 2011 Today's Forecast: Improved Wind...

178

Active vibration reduction applied to the compressor of an air?conditioning unit for trams  

Science Conference Proceedings (OSTI)

Within the framework of the European Integrated Project InMAR (intelligent materials for active noise reduction)active vibration control and active structural acoustic control approaches are applied to an HVAC (heating

Joachim Bs; Enrico Janssen; Michael Kauba; Dirk Mayer

2008-01-01T23:59:59.000Z

179

Regional Profiles for Distributed Resource Integration  

Science Conference Proceedings (OSTI)

This report characterizes regional drivers and challenges for distributed resource integration. Information gathered includes research and demonstration activities being conducted to integrate distributed resources into grid and market systems. The report summarizes lessons learned from literature review, workshops, and surveys conducted by EPRI in 2009 and 2010. The information gathered through these various channels is applied in this report towards identifying regional trends, demonstration needs, and...

2010-12-31T23:59:59.000Z

180

Integrated formal operations plan  

SciTech Connect

The concept of formal operations (that is, a collection of business practices to assure effective, accountable operations) has vexed the Laboratory for many years. To date most attempts at developing such programs have been based upon rigid, compliance-based interpretations of a veritable mountain of Department of Energy (DOE) orders, directives, notices, and standards. These DOE dictates seldom take the broad view but focus on highly specialized programs isolated from the overall context of formal operations. The result is a confusing array of specific, and often contradictory, requirements that produce a patchwork of overlapping niche programs. This unnecessary duplication wastes precious resources, dramatically increases the complexity of our work processes, and communicates a sense of confusion to our customers and regulators. Coupled with the artificial divisions that have historically existed among the Laboratory`s formal operations organizations (quality assurance, configuration management, records management, training, etc.), this approach has produced layers of increasingly vague and complex formal operations plans, each of which interprets its parent and adds additional requirements of its own. Organizational gridlock ensues whenever an activity attempts to implement these bureaucratic monstrosities. The integrated formal operations plan presented is to establish a set of requirements that must be met by an integrated formal operations program, assign responsibilities for implementation and operation of the program, and specify criteria against which the performance of the program will be measured. The accountable line manager specifies the items, processes, and information (the controlled elements) to which the formal operations program specified applies. The formal operations program is implemented using a graded approach based on the level of importance of the various controlled elements and the scope of the activities in which they are involved.

Cort, G.; Dearholt, W.; Donahue, S.; Frank, J.; Perkins, B.; Tyler, R.; Wrye, J.

1994-01-05T23:59:59.000Z

Note: This page contains sample records for the topic "integration cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

EERE Postdoctoral Research Awards: How to Apply  

NLE Websites -- All DOE Office Websites (Extended Search)

How to Apply to someone by E-mail Share EERE Postdoctoral Research Awards: How to Apply on Facebook Tweet about EERE Postdoctoral Research Awards: How to Apply on Twitter Bookmark...

182

THREE ESSAYS ON APPLIED ECONOMICS  

E-Print Network (OSTI)

In this dissertation three essays were presented. In the first two essays we measure the consumer welfare changes caused by U.S. meat price changes. In the third essay the dynamic structure of international gasoline prices using the time series methodology is investigated. In chapter II, we investigate the U.S. consumer behavior on meat consumption depending on a linear expenditure system (LES), and then we simulate the welfare effects of a set of price changes on the U.S. meat consumption. The simulation results show that the amount of consumer welfare change for each meat is not same across the meats under the same percentage change of price. The simulation results also show that when all the prices are doubled the total amount of CV reaches almost the same amount of current total quarterly expenditures for the three meats. In chapter III, we apply the compensating variation (CV) approach for the measurement of consumer welfare losses associated with beef price changes. We applied the long-run cointegrating relationship in vector error correction model (VECM) to estimate the Marshallian demand function. Apparently, the use of long-run cointegration in VECM in deriving the direct Marshallian demand function to measure the consumer welfare change is the first attempt in the literature. This is one of the contributions of the study. The simulation results show that the amount of consumer welfare change for beef is compatible with the one derived from LES methodology. In chapter IV, an empirical framework to summarize the interdependence of four international gasoline markets (New York, U.S. Gulf Coast, Rotterdam and Singapore) is presented. For that purpose, we employ a structural VECM and directed acyclic graphs (DAGs). To solve the identification problem in structural VECM, we apply DAGs derived from contemporaneous VECM innovations. The impulse response functions show that the time period in which a shock in a market affects the other market is very short. Forecast error variance decompositions (FEVD) shows that in all markets, except the U.S. Gulf Coast market, current and past shocks in their own market explained the most of the volatility in their own market in the Short-run.

Shin, Sang-Cheol

2008-08-01T23:59:59.000Z

183

Wind Integration Study Methods (Presentation)  

DOE Green Energy (OSTI)

This presentation provides an overview of common elements, differences, integration costs, and errors in integration analysis.

Milligan, M.; Kirby, B.

2011-04-01T23:59:59.000Z

184

Applied Materials | Open Energy Information  

Open Energy Info (EERE)

Materials Materials Jump to: navigation, search Name Applied Materials Address 3050 Bowers Avenue Place Santa Clara, California Zip 95054 Sector Solar Stock Symbol AMAT Website http://www.appliedmaterials.co Coordinates 37.3775749°, -121.9794416° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":37.3775749,"lon":-121.9794416,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

185

Weatherization and Intergovernmental Program: Apply for Weatherization  

NLE Websites -- All DOE Office Websites (Extended Search)

Apply Apply for Weatherization Assistance to someone by E-mail Share Weatherization and Intergovernmental Program: Apply for Weatherization Assistance on Facebook Tweet about Weatherization and Intergovernmental Program: Apply for Weatherization Assistance on Twitter Bookmark Weatherization and Intergovernmental Program: Apply for Weatherization Assistance on Google Bookmark Weatherization and Intergovernmental Program: Apply for Weatherization Assistance on Delicious Rank Weatherization and Intergovernmental Program: Apply for Weatherization Assistance on Digg Find More places to share Weatherization and Intergovernmental Program: Apply for Weatherization Assistance on AddThis.com... Plans, Implementation, & Results Weatherization Assistance Program Weatherization Services

186

Vehicle Technologies Office: Applied Battery Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Applied Battery Research Applied battery research addresses the barriers facing the lithium-ion systems that are closest to meeting the technical energy and power requirements for...

187

Energy Systems Integration  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Systems Integration Systems Integration Ben Kroposki, PhD, PE Director, Energy Systems Integration National Renewable Energy Laboratory 2 Reducing investment risk and optimizing systems in a rapidly changing energy world * Increasing penetration of variable RE in grid * Increasing ultra high energy efficiency buildings and controllable loads * New data, information, communications and controls * Electrification of transportation and alternative fuels * Integrating energy storage (stationary and mobile) and thermal storage * Interactions between electricity/thermal/fuels/data pathways * Increasing system flexibility and intelligence Current Energy Systems Future Energy Systems Why Energy Systems Integration? 3 Energy Systems Integration Continuum Scale Appliance (Plug)

188

Systems Integration Division Homepage  

Science Conference Proceedings (OSTI)

... systems integration and engineering, life cycle assessment, cyber-physical systems, productivity measurement, sustainability and energy efficiency. ...

2013-09-16T23:59:59.000Z

189

Combined Penalty Multiplier Optimization Methods to Enforce Integral Invariants Conservation  

Science Conference Proceedings (OSTI)

An augmented Lagrangian multiplier-penalty method is applied for the first time to solving the problem of enforcing simultaneous conservation of the nonlinear integral invariants of the shallow water equations on a limited-area domain. The method ...

I. M. Navon; R. de Villiers

1983-06-01T23:59:59.000Z

190

Leveraging enterprise architecture to enable integrated test and evaluation sustainability  

E-Print Network (OSTI)

An analysis was performed to investigate how enterprise architecting methods can be applied to an integrate test and evaluation enterprise and make it a more sustainable enterprise to provide continuous value in the face ...

Sheets, Arlan C. (Arlan Christopher)

2011-01-01T23:59:59.000Z

191

Progress in Developing and Extending RM Heterogeneous Integration Technologies  

E-Print Network (OSTI)

This paper describes recent progress in a continuing program to develop and apply RM (recess mounting with monolithic metallization) technologies for heterogeneous integration. Particular emphasis is placed on the APB ...

Fonstad, Clifton G. Jr.

192

The Track Integrated Kinetic Energy of Atlantic Tropical Cyclones  

Science Conference Proceedings (OSTI)

In this paper the concept of track integrated kinetic energy (TIKE) is introduced as a measure of seasonal Atlantic tropical cyclone activity and applied to seasonal variability in the Atlantic. It is similar in concept to the more commonly used ...

V. Misra; S. DiNapoli; M. Powell

2013-07-01T23:59:59.000Z

193

DARPA Learning Applied to Ground Robots (LAGR)  

Science Conference Proceedings (OSTI)

DARPA Learning Applied to Ground Robots (LAGR) Project (Concluded). Summary: The National Institute of Standards ...

2012-01-04T23:59:59.000Z

194

Relational measures and integration  

Science Conference Proceedings (OSTI)

Work in fuzzy modeling has recently made its way from the interval $[0,1]\\subseteq {\\mathord{\\rm I \\! R}}$ to the ordinal or even to the qualitative level. We proceed further and introduce relational measures and relational integration. First ideas of ... Keywords: Choquet integral, evidence and belief, measure, necessity, plausibility, possibility measures, relation algebra, relational, sugeno integral

Gunther Schmidt

2006-08-01T23:59:59.000Z

195

Academic integrity policies in a computing education context  

Science Conference Proceedings (OSTI)

Academic integrity policies embody widely accepted principles of ethics and behaviour, instantiating in their codes the standards and processes that apply to the institutions enacting them. Application of these principles to the field of computing, which ... Keywords: academic dishonesty, academic integrity, assessment, cheating, collaboration, collusion, educational, plagiarism, policies, practices

Charles P. Riedesel; Alison L. Clear; Gerry W. Cross; Janet M. Hughes; Simon; Henry M. Walker

2012-07-01T23:59:59.000Z

196

Lighting Group: Controls: Systems Integration  

NLE Websites -- All DOE Office Websites (Extended Search)

Systems Integration Building Control Systems Integration Objective This research project investigates how diverse building control systems can be integrated to provide seamless...

197

Categorical Exclusion Determinations: National Energy Technology Laboratory  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

May 1, 2012 May 1, 2012 CX-008288: Categorical Exclusion Determination Decommissioning of the Appliance Testing and Evaluation Center in Morgantown CX(s) Applied: B3.6 Date: 05/01/2012 Location(s): West Virginia Offices(s): National Energy Technology Laboratory May 1, 2012 CX-008287: Categorical Exclusion Determination Technology Integration Program CX(s) Applied: A9 Date: 05/01/2012 Location(s): CX: none Offices(s): National Energy Technology Laboratory May 1, 2012 CX-008286: Categorical Exclusion Determination Technology Integration Program CX(s) Applied: A9, A11, B3.6 Date: 05/01/2012 Location(s): Tennessee Offices(s): National Energy Technology Laboratory May 1, 2012 CX-008285: Categorical Exclusion Determination E85 (Ethanol) Retail Fueling Infrastructure Installation CX(s) Applied: B5.22

198

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1, 2012 1, 2012 CX-008288: Categorical Exclusion Determination Decommissioning of the Appliance Testing and Evaluation Center in Morgantown CX(s) Applied: B3.6 Date: 05/01/2012 Location(s): West Virginia Offices(s): National Energy Technology Laboratory May 1, 2012 CX-008287: Categorical Exclusion Determination Technology Integration Program CX(s) Applied: A9 Date: 05/01/2012 Location(s): CX: none Offices(s): National Energy Technology Laboratory May 1, 2012 CX-008286: Categorical Exclusion Determination Technology Integration Program CX(s) Applied: A9, A11, B3.6 Date: 05/01/2012 Location(s): Tennessee Offices(s): National Energy Technology Laboratory May 1, 2012 CX-008285: Categorical Exclusion Determination E85 (Ethanol) Retail Fueling Infrastructure Installation CX(s) Applied: B5.22

199

Integrability vs Quantum Thermalization  

E-Print Network (OSTI)

Non-integrability is often taken as a prerequisite for quantum thermalization. Still, a generally accepted definition of quantum integrability is lacking. With the basis in the driven Rabi model we discuss this careless usage of the term "integrability" in connection to quantum thermalization. The model would be classified as non-integrable according to the most commonly used definitions, for example, the only preserved quantity is the total energy. Despite this fact, a thorough analysis conjectures that the system will not thermalize. Thus, our findings suggest first of all (i) that care should be paid when linking non-integrability with thermalization, and secondly (ii) that the standardly used definitions for quantum integrability are unsatisfactory.

Jonas Larson

2013-04-12T23:59:59.000Z

200

Integrated Safety Management (ISM)  

NLE Websites -- All DOE Office Websites (Extended Search)

Integrated Safety Management Integrated Safety Management Home ISM Policy ISM Champions ISM Workshops Resources Archives Contact Us Health and Safety HSS Logo Integrated Safety Management (ISM) ism logo Welcome to the Department of Energy's Office of Health, Safety and Security (HSS) Integrated Safety Management (ISM) Web Site. The Department and its contractors remain firmly committed to ISM as first defined in 1996. The objective of ISM is to perform work in a safe and environmentally sound manner. More specifically, as described in DOE P 450.4, Safety Management System Policy: "The Department and Contractors must systematically integrate safety into management and work practices at all levels so that missions are accomplished while protecting the public, the worker, and the environment. This is to be accomplished through effective integration of safety management into all facets of work planning and execution." "

Note: This page contains sample records for the topic "integration cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Oxidation Kinetics Modeling Applying Phase Field Approach  

Science Conference Proceedings (OSTI)

Presentation Title, Oxidation Kinetics Modeling Applying Phase Field Approach ... chemical reaction rates will increase exponentially and environmental attack...

202

Researcher, Los Alamos National Laboratory - Applied Physics...  

NLE Websites -- All DOE Office Websites (Extended Search)

Applied Physics Division | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response...

203

Applied Chemicals and Materials Staff Directory  

Science Conference Proceedings (OSTI)

Applied Chemicals and Materials Staff Directory. ... accept either a name, organizational name, or ... MML Organization. Contact. Material Measurement ...

2012-10-12T23:59:59.000Z

204

Opportunities to Apply Phase Change Materials to Building Enclosures Webinar  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1, 2011 1, 2011 Opportunities to Apply Phase Change Materials to Building Enclosures Welcome to the Webinar! We will start at 2:00 PM Eastern Time Be sure that you are also dialed into the telephone conference call: Dial-in number: 888-950-6757; Pass code: 6420234 1 | Building America Program www.buildingamerica.gov Building America: Introduction November 11, 2011 Chuck Booten Chuck.Booten@nrel.gov Building Technologies Program 2 | Building America Program www.buildingamerica.gov * Reduce energy use in new and existing residential buildings * Promote building science and systems engineering / integration approach * "Do no harm": Ensure safety, health and durability are maintained or improved

205

Distributed Resource Integration Framework  

Science Conference Proceedings (OSTI)

This report defines a framework for assessing current issues and considerations associated with the deployment and operation of distributed resources. The framework is a guide that can assist utility personnel, distributed resource owners, and other stakeholders in planning integration projects and in relating different integration projects to one another. The framework provides a structured organization of the various elements associated with distributed resource integration, including regulatory, busin...

2009-12-23T23:59:59.000Z

206

Substation Data Integration  

Science Conference Proceedings (OSTI)

The purpose of the project was to implement a field demonstration of automated substation data integration. To achieve the goal of the smart grid, it will be necessary to integrate substation intelligent electronic device (IED) data into a data warehouse or data mart. Converting data to information to allow improved decision making requires automation, which is referred to as an information smart approach. The report discusses automated integration of data from substation IEDs and automated analysis of r...

2010-12-06T23:59:59.000Z

207

CHEMICAL ENGINEERING SCHOOL OF ENGINEERING & APPLIED SCIENCE  

E-Print Network (OSTI)

30 CHEMICAL ENGINEERING SCHOOL OF ENGINEERING & APPLIED SCIENCE MIAMI UNIVERSITY 2005-2006 The program leads to the degree, Bachelor of Science in Applied Science, with a major in Chemical Engineering The chemical engineering students learn to apply the concepts of chemistry, biochemistry and biological science

Dollar, Anna

208

Advanced Integrated Systems Technology Development  

E-Print Network (OSTI)

Research Energy Systems Integration Environmentallyenergy use, combined with the capability of the BMS system, including alarms to identify anomalies. Integration

2013-01-01T23:59:59.000Z

209

Infrastructure for Integrated Electronics Design & ...  

Science Conference Proceedings (OSTI)

Infrastructure for Integrated Electronics Design & Manufacturing (IIEDM) Project. ... designed to support distributed supply chain integration and e ...

2010-11-05T23:59:59.000Z

210

Computer Integrated Building Processes Group  

Science Conference Proceedings (OSTI)

... Laboratory effective in October 2011, the Computer Integrated Building Processes Group ... Chris Brown) are now in the Systems Integration Division. ...

2013-07-12T23:59:59.000Z

211

Integrated Biosystems for Sustainable Development  

E-Print Network (OSTI)

Integrated biosystems for sustainable development Proceedings of the InFoRM 2000 National Workshop on Integrated

Kev Warburton; Usha Pillai-mcgarry; Deborah Ramage; No Ms; Dr. Kev Warburton

2002-01-01T23:59:59.000Z

212

Grid Integration Group  

NLE Websites -- All DOE Office Websites (Extended Search)

Grid Integration Group The Demand Response Research Center (DRRC) conducts research that advances the near-term adoption of demand response (DR) technologies, policies, programs,...

213

Integrated Computational Materials Education  

Science Conference Proceedings (OSTI)

This short course is based on the Summer School for Integrated Computational Materials Education, which was developed to meet this need. We will present a...

214

Software Component Integration Testing  

Science Conference Proceedings (OSTI)

... a combination of off-the-shelf components, with new components integrated to satisfy ... oriented, that is, it consists of objects with state and behavior. ...

2011-12-02T23:59:59.000Z

215

Integrated waste management.  

E-Print Network (OSTI)

??Integrated waste management is considered from a systems approach, with a particular emphasis on advancing sustainability. The focus of the thesis is to examine the (more)

Seadon, Jeffrey Keith

2010-01-01T23:59:59.000Z

216

Integrable Henon-Heiles Hamiltonians: A Poisson algebra approach  

SciTech Connect

The three integrable two-dimensional Henon-Heiles systems and their integrable perturbations are revisited. A family of new integrable perturbations is found, and N-dimensional completely integrable generalizations of all these systems are constructed by making use of sl(2,R)+h{sub 3} as their underlying Poisson symmetry algebra. In general, the procedure here introduced can be applied in order to obtain N-dimensional integrable generalizations of any 2D integrable potential of the form V(q{sub 1}{sup 2},q{sub 2}), and the formalism gives the explicit form of all the integrals of the motion. Further applications of this algebraic approach in different contexts are suggested.

Ballesteros, Angel, E-mail: angelb@ubu.e [Departamento de Fisica, Universidad de Burgos, 09001 Burgos (Spain); Blasco, Alfonso, E-mail: ablasco@ubu.e [Departamento de Fisica, Universidad de Burgos, 09001 Burgos (Spain)

2010-12-15T23:59:59.000Z

217

Water Waves and Integrability  

E-Print Network (OSTI)

The Euler's equations describe the motion of inviscid fluid. In the case of shallow water, when a perturbative asymtotic expansion of the Euler's equations is taken (to a certain order of smallness of the scale parameters), relations to certain integrable equations emerge. Some recent results concerning the use of integrable equation in modeling the motion of shallow water waves are reviewed in this contribution.

Rossen I. Ivanov

2007-07-12T23:59:59.000Z

218

Systems Integration (Fact Sheet)  

DOE Green Energy (OSTI)

The Systems Integration (SI) subprogram works closely with industry, universities, and the national laboratories to overcome technical barriers to the large-scale deployment of solar technologies. To support these goals, the subprogram invests primarily in four areas: grid integration, technology validation, solar resource assessment, and balance of system development.

Not Available

2011-10-01T23:59:59.000Z

219

FCT Technology Validation: Integrated Projects  

NLE Websites -- All DOE Office Websites (Extended Search)

Integrated Projects to Integrated Projects to someone by E-mail Share FCT Technology Validation: Integrated Projects on Facebook Tweet about FCT Technology Validation: Integrated Projects on Twitter Bookmark FCT Technology Validation: Integrated Projects on Google Bookmark FCT Technology Validation: Integrated Projects on Delicious Rank FCT Technology Validation: Integrated Projects on Digg Find More places to share FCT Technology Validation: Integrated Projects on AddThis.com... Home Transportation Projects Stationary/Distributed Generation Projects Integrated Projects DOE Projects Non-DOE Projects Quick Links Hydrogen Production Hydrogen Delivery Hydrogen Storage Fuel Cells Manufacturing Codes & Standards Education Systems Analysis Contacts Integrated Projects To maximize overall system efficiencies, reduce costs, and optimize

220

Introduction to Integrating Renewable Energy into Federal Construction |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Introduction to Integrating Renewable Energy into Federal Introduction to Integrating Renewable Energy into Federal Construction Introduction to Integrating Renewable Energy into Federal Construction October 16, 2013 - 4:50pm Addthis The introduction to this guide outlines key topics that led to the development of the Guide to Integrating Renewable Energy into Federal Construction. It discusses: Benefits of Renewable Energy Use: Renewable energy technologies have wide ranging benefits, including economic development and job creation, national security, price stability and environmental improvement. Meeting Federal Renewable Energy Requirements: A range of legislation and executive orders have stipulated wide-ranging renewable energy requirements and goals that apply to new construction and major renovation projects.

Note: This page contains sample records for the topic "integration cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Applied Solar LLC formerly Open Energy Corp and Barnabus Energy Inc | Open  

Open Energy Info (EERE)

formerly Open Energy Corp and Barnabus Energy Inc formerly Open Energy Corp and Barnabus Energy Inc Jump to: navigation, search Name Applied Solar LLC (formerly Open Energy Corp and Barnabus Energy Inc) Place San Diego, California Zip 92121 Sector Solar Product Offers an integrated portfolio of building-integrated PV products such as solar tiles, membranes and asphalt/composition products; also holds license to build concentrating solar power systems. References Applied Solar LLC (formerly Open Energy Corp and Barnabus Energy Inc)[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Applied Solar LLC (formerly Open Energy Corp and Barnabus Energy Inc) is a company located in San Diego, California . References ↑ "Applied Solar LLC (formerly Open Energy Corp and Barnabus

222

Integrated assessment briefs  

Science Conference Proceedings (OSTI)

Integrated assessment can be used to evaluate and clarify resource management policy options and outcomes for decision makers. The defining characteristics of integrated assessment are (1) focus on providing information and analysis that can be understood and used by decision makers rather than for merely advancing understanding and (2) its multidisciplinary approach, using methods, styles of study, and considerations from a broader variety of technical areas than would typically characterize studies produced from a single disciplinary standpoint. Integrated assessment may combine scientific, social, economic, health, and environmental data and models. Integrated assessment requires bridging the gap between science and policy considerations. Because not everything can be valued using a single metric, such as a dollar value, the integrated assessment process also involves evaluating trade-offs among dissimilar attributes. Scientists at Oak Ridge National Laboratory (ORNL) recognized the importance and value of multidisciplinary approaches to solving environmental problems early on and have pioneered the development of tools and methods for integrated assessment over the past three decades. Major examples of ORNL`s experience in the development of its capabilities for integrated assessment are given.

NONE

1995-04-01T23:59:59.000Z

223

Fundamental & Applied Bioenergy | Clean Energy | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

a new generation of efficient bioenergy strategies that will reduce U.S. dependence on foreign oil and help curb carbon emissions. Fundamental and applied bioenergy research at...

224

Applied Control Strategies at a Cogeneration Plant.  

E-Print Network (OSTI)

?? The purpose of this paper is to demonstrate the effectiveness of classical strategies for dynamic control on authentic cogeneration processes. These strategies are applied (more)

Burns, Joseph William

2011-01-01T23:59:59.000Z

225

Applied Quantum Technology AQT | Open Energy Information  

Open Energy Info (EERE)

AQT Jump to: navigation, search Name Applied Quantum Technology (AQT) Place Santa Clara, California Zip 95054 Product California-based manufacturer of CIGS (copper indium gallium...

226

Applying RBR and CBR to develop a VR based integrated system for machining fixture design  

Science Conference Proceedings (OSTI)

A fixture is a special tool used to accurately and stably locate the workpiece during machining process. Proper fixture design improves the quality and production of parts and also facilitates the interchangeability of parts that is prevalent in much ... Keywords: Case-based reasoning (CBR), Machining fixture design, Rule-based reasoning (RBR), Virtual reality

Gaoliang Peng; Guangfeng Chen; Chong Wu; Hou Xin; Yang Jiang

2011-01-01T23:59:59.000Z

227

Technical and Energy Assessment of Building Integrated Photovoltaic Systems applied to the UAE Office Buildings  

E-Print Network (OSTI)

In the market, the embodied energy payback time (EPBT) is the scale to measure and compare the viability of PV systems against other technologies. Although the impact of PV panels on the operational energy is significant, it is not considered at the time of EPBT estimation. Including savings in operational energy gained over the PV system life leads to shortening the total EPBT. This study shows that the ratio between PV outputs and savings in energy due to PV panels is about 1:3. For the southern and western PV facades of the UAE office buildings, the embodied energy payback time is 12-13 years. When reductions in operational energy are considered the payback time can be reduced to 3 years. It is obvious that the reduction in the operational energy due to the PV panels represents an important factor when the EPBT is estimated.

Radhi, H.

2010-01-01T23:59:59.000Z

228

Baseline information development for energy smart schools -- applied research, field testing and technology integration  

E-Print Network (OSTI)

the Energy Center of Wisconsin (ECW) manages DaylightingFlorida, New York, and Wisconsin. The goal of this dataFlorida, New York, and Wisconsin. Throughout the project,

Xu, Tengfang; Piette, Mary Ann

2004-01-01T23:59:59.000Z

229

Baseline information development for energy smart schools -- applied research, field testing and technology integration  

E-Print Network (OSTI)

and Southern California Edison company surveys (CEUS - SCEPGE), Southern California Edison (SCE), and San Diego Gas &and Southern California Edison surveys (199 2, 1995) WI:

Xu, Tengfang; Piette, Mary Ann

2004-01-01T23:59:59.000Z

230

An integrated algorithm for gene selection and classification applied to microarray data of ovarian cancer  

Science Conference Proceedings (OSTI)

Objective: The type of data in microarray provides unprecedented amount of data. A typical microarray data of ovarian cancer consists of the expressions of tens of thousands of genes on a genomic scale, and there is no systematic procedure to analyze ... Keywords: Gene selection, Genetic algorithm, Microarray data, Ovarian cancer, Particle swarm optimization, Support vector machine

Zne-Jung Lee

2008-01-01T23:59:59.000Z

231

Baseline information development for energy smart schools -- applied research, field testing and technology integration  

E-Print Network (OSTI)

et al. 2002) on school energy usage. Some of these studiesschool buildings and their energy usage from three states:NYSERDA, there is no K-12 energy usage information from New

Xu, Tengfang; Piette, Mary Ann

2004-01-01T23:59:59.000Z

232

Baseline information development for energy smart schools -- applied research, field testing and technology integration  

E-Print Network (OSTI)

electricity and natural gas usage, and sum of these basedaggregated electricity and/or gas usages for the buildinggas, other fuels), building areas served, equipment types and usage

Xu, Tengfang; Piette, Mary Ann

2004-01-01T23:59:59.000Z

233

Baseline information development for energy smart schools -- applied research, field testing and technology integration  

SciTech Connect

The original scope of work was to obtain and analyze existing and emerging data in four states: California, Florida, New York, and Wisconsin. The goal of this data collection was to deliver a baseline database or recommendations for such a database that could possibly contain window and daylighting features and energy performance characteristics of Kindergarten through 12th grade (K-12) school buildings (or those of classrooms when available). In particular, data analyses were performed based upon the California Commercial End-Use Survey (CEUS) databases to understand school energy use, features of window glazing, and availability of daylighting in California K-12 schools. The outcomes from this baseline task can be used to assist in establishing a database of school energy performance, assessing applications of existing technologies relevant to window and daylighting design, and identifying future R&D needs. These are in line with the overall project goals as outlined in the proposal. Through the review and analysis of this data, it is clear that there are many compounding factors impacting energy use in K-12 school buildings in the U.S., and that there are various challenges in understanding the impact of K-12 classroom energy use associated with design features of window glazing and skylight. First, the energy data in the existing CEUS databases has, at most, provided the aggregated electricity and/or gas usages for the building establishments that include other school facilities on top of the classroom spaces. Although the percentage of classroom floor area in schools is often available from the databases, there is no additional information that can be used to quantitatively segregate the EUI for classroom spaces. In order to quantify the EUI for classrooms, sub-metering of energy usage by classrooms must be obtained. Second, magnitudes of energy use for electricity lighting are not attainable from the existing databases, nor are the lighting levels contributed by artificial lighting or daylight. It is impossible to reasonably estimate the lighting energy consumption for classroom areas in the sample of schools studied in this project. Third, there are many other compounding factors that may as well influence the overall classroom energy use, e.g., ventilation, insulation, system efficiency, occupancy, control, schedules, and weather. Fourth, although we have examined the school EUI grouped by various factors such as climate zones, window and daylighting design features from the California databases, no statistically significant associations can be identified from the sampled California K-12 schools in the current California CEUS. There are opportunities to expand such analyses by developing and including more powerful CEUS databases in the future. Finally, a list of parameters is recommended for future database development and for use of future investigation in K-12 classroom energy use, window and skylight design, and possible relations between them. Some of the key parameters include: (1) Energy end use data for lighting systems, classrooms, and schools; (2) Building design and operation including features for windows and daylighting; and (3) Other key parameters and information that would be available to investigate overall energy uses, building and systems design, their operation, and services provided.

Xu, Tengfang; Piette, Mary Ann

2004-08-05T23:59:59.000Z

234

Baseline information development for energy smart schools -- applied research, field testing and technology integration  

E-Print Network (OSTI)

swimm ing pools and climate zones. Th e major findings aresound statements. The way the climate zones are divided waswhich aggregated CEC 16 climate zones into four regions by

Xu, Tengfang; Piette, Mary Ann

2004-01-01T23:59:59.000Z

235

Ensuring critical event sequences in high integrity software by applying path expressions  

SciTech Connect

The goal of this work is to extend the use of existing path expression theory and methodologies to ensure that critical software event sequences are maintained even in the face of malevolent attacks and harsh or unstable operating environments. This will be accomplished by providing dynamic fault management measures directly to the software developer and to their varied development environments. This paper discusses the perceived problems, a brief overview of path expressions, and the author`s proposed extension areas. The authors discuss how the traditional path expression usage and implementation differs from the intended usage and implementation.

Kidd, M.E.C.

1996-07-01T23:59:59.000Z

236

Baseline information development for energy smart schools -- applied research, field testing and technology integration  

E-Print Network (OSTI)

daylighting Other key parameters and information that would be available to investigate overall energy uses, building and systems

Xu, Tengfang; Piette, Mary Ann

2004-01-01T23:59:59.000Z

237

Spherical Nonparametric Estimators Applied to the UGAMP Model Integration for AMIP  

Science Conference Proceedings (OSTI)

The aim of this paper is essentially twofold: first, to describe the use of spherical nonparametric estimators for determining statistical diagnostic fields from ensembles of feature tracks on a global domain, and second, to report the ...

K. I. Hodges

1996-12-01T23:59:59.000Z

238

On Quantum Integrable Systems  

SciTech Connect

Many quantum integrable systems are obtained using an accelerator physics technique known as Ermakov (or normalized variables) transformation. This technique was used to create classical nonlinear integrable lattices for accelerators and nonlinear integrable plasma traps. Now, all classical results are carried over to a nonrelativistic quantum case. In this paper we have described an extension of the Ermakov-like transformation to the Schroedinger and Pauli equations. It is shown that these newly found transformations create a vast variety of time dependent quantum equations that can be solved in analytic functions, or, at least, can be reduced to time-independent ones.

Danilov, Viatcheslav; /Oak Ridge; Nagaitsev, Sergei; /Fermilab

2011-11-01T23:59:59.000Z

239

Bioluminescent Bioreporter Integrated Circuits  

To address the need for fieldable real-time biological recognition systems, ORNL researchers developed a "laboratory on a chip" using genetically engineered whole cell biosensors attached to integrated circuits (ICs). These bioluminescent ...

240

Integrated optical isolators  

E-Print Network (OSTI)

Introduction: Optical isolators are important components in lasers. Their main function is to eliminate noise caused by back-reflections into these lasers. The need for integrated isolators comes from the continuing growth ...

Zaman, Tauhid R

2005-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "integration cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Integrated Project Team RM  

Energy.gov (U.S. Department of Energy (DOE))

The Integrated Project Team (IPT) is an essential element of the Departments acquisition process and will be utilized during all phases of a project life cycle. The IPT is a team of professionals...

242

Wellbore Integrity Network  

SciTech Connect

In this presentation, we review the current state of knowledge on wellbore integrity as developed in the IEA Greenhouse Gas Programme's Wellbore Integrity Network. Wells are one of the primary risks to the successful implementation of CO{sub 2} storage programs. Experimental studies show that wellbore materials react with CO{sub 2} (carbonation of cement and corrosion of steel) but the impact on zonal isolation is unclear. Field studies of wells in CO{sub 2}-bearing fields show that CO{sub 2} does migrate external to casing. However, rates and amounts of CO{sub 2} have not been quantified. At the decade time scale, wellbore integrity is driven by construction quality and geomechanical processes. Over longer time-scales (> 100 years), chemical processes (cement degradation and corrosion) become more important, but competing geomechanical processes may preserve wellbore integrity.

Carey, James W. [Los Alamos National Laboratory; Bachu, Stefan [Alberta Innovates

2012-06-21T23:59:59.000Z

243

Integrated XML Document Management  

Science Conference Proceedings (OSTI)

XML has become a widely accepted data format for exchange and representation of semi-structured data. Efficiently managing XML as well as traditional business documents and content in an integrated fashion is a necessity for companies to be successful ...

Hui-I Hsiao; Joshua Hui; Ning Li; Parag Tijare

2003-01-01T23:59:59.000Z

244

Hanford Tank Integrity Project  

Jordan Follett DST Project Plan and SST Use jordan_r_follet@rl.gov Rick Rast Structural Lead richard_s_rast@rl.gov Ted Venetz SST Integrity Lead theodore_j_venetz@rl.gov

245

Extended Enterprise Integration  

Science Conference Proceedings (OSTI)

This paper discusses the competitive pressures forcing major organisations to co-operate ever more closely in designing, manufacturing and supporting new products and major assets. It explains the resulting business and integration issues and presents ...

J. Gunn

2000-04-01T23:59:59.000Z

246

DRAFT GUIDANCE Applying for Other Uses of  

E-Print Network (OSTI)

DRAFT GUIDANCE Applying for Other Uses of Phosphogypsum: Submitting a Complete Petition 40 CFR 61 Assignment 0-2 #12;Applying for Other Uses of Phosphogypsum: Submitting a Complete Petition Table of Contents phosphogypsum in stacks? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.4. What

247

Applied technology section. Monthly report, March 1994  

Science Conference Proceedings (OSTI)

This is a monthly report giving the details on research currently being conducted at the Savannah River Technology Center. The following are areas of the research, engineering modeling and simulation, applied statistics, applied physics,experimental thermal hydraulics,and packaging and transportation.

Buckner, M.R.

1994-04-20T23:59:59.000Z

248

Integration by cell algorithm for Slater integrals in a spline basis  

Science Conference Proceedings (OSTI)

An algorithm for evaluating Slater integrals in a B-spline basis is introduced. Based on the piecewise property of the B-splines, the algorithm divides the two-dimensional (r{sub 1}, r{sub 2}) region into a number of rectangular cells according to the chosen grid and implements the two-dimensional integration over each individual cell using Gaussian quadrature. Over the off-diagonal cells, the integrands are separable so that each two-dimensional cell-integral is reduced to a product of two one-dimensional integrals. Furthermore, the scaling invariance of the B-splines in the logarithmic region of the chosen grid is fully exploited such that only some of the cell integrations need to be implemented. The values of given Slater integrals are obtained by assembling the cell integrals. This algorithm significantly improves the efficiency and accuracy of the traditional method that relies on the solution of differential equations and renders the B-spline method more effective when applied to multi-electron atomic systems.

Qiu, Y.; Fischer, C.F.

1999-12-10T23:59:59.000Z

249

Integrated Safety Management Policy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

INTEGRATED SAFETY INTEGRATED SAFETY MANAGEMENT SYSTEM DESCRIPTION U.S. DEPARTMENT OF ENERGY Office of Environmental Management Headquarters May 2008 Preparation: Braj K. sin& Occupational Safety and Health Manager Office of Safety Management Concurrence: Chuan-Fu wu Director, Offlce of Safety Management Deputy Assistant Secretary for safe& Management andoperations Operations Officer for 1 Environmental Management Approval: Date p/-g Date Environmental Management TABLE OF CONTENTS ACRONYMS................................................................................................................................................................v EXECUTIVE SUMMARY .........................................................................................................................................1

250

CIM Application Integration  

Science Conference Proceedings (OSTI)

The EPRI Common Information Model (CIM) has been used as the basis or schema for implementing a real-time relational database in the CIM Application Integration Project. The CIM relational database is implemented in a normalized form so that it can support a complete range of utility transmission, generation, distribution, substation, and asset management applications. The objective of this document is to provide a final report on the CIM Application Integration Project.

2004-02-02T23:59:59.000Z

251

Applied Materials Inc AMAT | Open Energy Information  

Open Energy Info (EERE)

Inc AMAT Inc AMAT Jump to: navigation, search Name Applied Materials Inc (AMAT) Place Santa Clara, California Zip 95052-8039 Sector Solar Product US-based manufacturer of equipment used in solar (silicon, thin-film, BIPV), semiconductor, and LCD markets. References Applied Materials Inc (AMAT)[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Applied Materials Inc (AMAT) is a company located in Santa Clara, California . References ↑ "Applied Materials Inc (AMAT)" Retrieved from "http://en.openei.org/w/index.php?title=Applied_Materials_Inc_AMAT&oldid=342244" Categories: Clean Energy Organizations Companies Organizations Stubs What links here Related changes

252

Applied Materials Wind Turbine | Open Energy Information  

Open Energy Info (EERE)

Wind Turbine Wind Turbine Jump to: navigation, search Name Applied Materials Wind Turbine Facility Applied Materials Sector Wind energy Facility Type Community Wind Facility Status In Service Owner Applied Materials Developer Applied Materials Energy Purchaser Applied Materials Location Gloucester MA Coordinates 42.62895426°, -70.65153122° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":42.62895426,"lon":-70.65153122,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

253

NREL: Distributed Grid Integration - Solar Distributed Grid Integration  

NLE Websites -- All DOE Office Websites (Extended Search)

Solar Distributed Grid Integration Projects Solar Distributed Grid Integration Projects NREL provides grid integration support, system-level testing, and systems analysis for DOE's Solar Distributed Grid Integration Projects supported by the SunShot Initiative. These projects address technical issues and develop solutions for high penetration grid integration of solar technologies into the electric power system to meet the following goals: Reduce cost: reduce interconnection costs by developing streamlined procedures including advanced integration models for utility interconnection of photovoltaics (PV) Reduce market barriers: work with utilities and system integrators to reduce market barriers by providing research on impacts of integration of high penetration of PV systems and developing solutions.

254

Categorical Exclusion Determinations: A9 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

August 15, 2013 August 15, 2013 CX-010752: Categorical Exclusion Determination NYSolar Smart CX(s) Applied: A9, A11 Date: 08/15/2013 Location(s): New York Offices(s): Golden Field Office August 15, 2013 CX-010751: Categorical Exclusion Determination Solar Ready 2 CX(s) Applied: A9, A11 Date: 08/15/2013 Location(s): Missouri Offices(s): Golden Field Office August 15, 2013 CX-010739: Categorical Exclusion Determination Golden State Solar Impact CX(s) Applied: A9, A11 Date: 08/15/2013 Location(s): California Offices(s): Golden Field Office August 15, 2013 CX-010749: Categorical Exclusion Determination Pilot-Scale Mixotrophic Algae Integrated Biorefinery CX(s) Applied: A9, B5.15 Date: 08/15/2013 Location(s): Illinois Offices(s): Golden Field Office August 15, 2013 CX-010748: Categorical Exclusion Determination

255

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

14, 2011 14, 2011 CX-007422: Categorical Exclusion Determination Module-Integrated Power Converters Based on Universal Dock CX(s) Applied: A9, B3.6 Date: 12/14/2011 Location(s): Texas Offices(s): Golden Field Office December 14, 2011 CX-007413: Categorical Exclusion Determination Transforming Photovoltaic Installations Toward Discpatchable, Schedulable Energy Solutions CX(s) Applied: A9, B3.6 Date: 12/14/2011 Location(s): Oregon Offices(s): Golden Field Office December 13, 2011 CX-007418: Categorical Exclusion Determination Sidewalks to School CX(s) Applied: B1.13 Date: 12/13/2011 Location(s): South Carolina Offices(s): Golden Field Office December 13, 2011 CX-007426: Categorical Exclusion Determination Sharyland Independent School District CX(s) Applied: B5.16 Date: 12/13/2011

256

Categorical Exclusion Determinations: A9 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

July 16, 2012 July 16, 2012 CX-008584: Categorical Exclusion Determination Solar Decathlon 2013 CX(s) Applied: A9, A11, B5.1 Date: 07/16/2012 Location(s): California Offices(s): Golden Field Office July 16, 2012 CX-008596: Categorical Exclusion Determination Northeast Provider of Solar Instructor Training - North CX(s) Applied: A9, A11, B5.16 Date: 07/16/2012 Location(s): Maine Offices(s): Golden Field Office July 16, 2012 CX-008432: Categorical Exclusion Determination Puerto Rico-City-Toa Baja CX(s) Applied: A9, A11, B2.5, B5.1 Date: 07/16/2012 Location(s): Puerto Rico Offices(s): Energy Efficiency and Renewable Energy July 16, 2012 CX-008500: Categorical Exclusion Determination All Electric Subsea Autonomous High Integrity Pressure Protection System CX(s) Applied: A9, A11, B3.6

257

Taking our own medicine: applying the refinement calculus to state-rich refinement model checking  

Science Conference Proceedings (OSTI)

In this paper, we advocate the use of formal specification and verification in software development for high-integrity and safety-critical systems, where mechanical proof plays a central role. In particular, we emphasise the crucial importance of applying ... Keywords: formal verification, model checking, theorem proving

Leo Freitas; Ana Cavalcanti; Jim Woodcock

2006-11-01T23:59:59.000Z

258

NREL: Energy Systems Integration - Webmaster  

NLE Websites -- All DOE Office Websites (Extended Search)

Your name: Your email address: Your message: Send Message Printable Version Energy Systems Integration Home Research & Development Energy Systems Integration Facility Working...

259

Integrated curriculum: art as catalyst.  

E-Print Network (OSTI)

??An arts based integrated curriculum plan is what resulted from a look at integrated curriculum and the advantages it has for student learning and success. (more)

Kiser, Elizabeth

2013-01-01T23:59:59.000Z

260

Integrity Automotive | Open Energy Information  

Open Energy Info (EERE)

Automotive Jump to: navigation, search Name Integrity Automotive Place Kentucky Product Joint venture between Kentucky businessman Randal Waldman of Integrity Manufacturing and...

Note: This page contains sample records for the topic "integration cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

NREL: Transmission Grid Integration - Projects  

NLE Websites -- All DOE Office Websites (Extended Search)

Generation Integration Study Oahu Wind Integration and Transmission SIND Toolkit Electricity Market Design Energy Imbalance Markets Flexible Energy Scheduling Tool for...

262

SRS Tank Structural Integrity Program  

integrity management, such as those captured in the SRS and Hanford Structural Integrity Charts, and not isolated to just NDE concerns.

263

NREL: Transmission Grid Integration - Publications  

NLE Websites -- All DOE Office Websites (Extended Search)

Publications Publications Want updates about future transmission grid integration webinars and publications? Join our mailing list. NREL has an extensive collection of publications related to transmission integration research. Explore the resources below to learn more. Selected Project Publications Read selected publications related to these transmission integration projects: Western Wind and Solar Integration Study Eastern Renewable Generation Integration Study Oahu Wind Integration and Transmission Study Flexible Energy Scheduling Tool for Integration of Variable generation (FESTIV) Active power controls Forecasting Grid Simulation. NREL Publications Database NREL's publications database offers a variety of documents related to transmission integration that were written by NREL staff and

264

Integrity Lessons from the WAAS Integrity Performance Panel (WIPP)  

E-Print Network (OSTI)

Integrity Lessons from the WAAS Integrity Performance Panel (WIPP) Todd Walter, Per Enge, Stanford that the integrity requirement would be met, the FAA formed the WAAS Integrity Performance Panel (WIPP). The role of the WIPP is to independently assess the safety of WAAS and to recommend system improvements. To accomplish

Stanford University

265

Integrated Micro Nano Systems Integrated Micro Nano Systems  

E-Print Network (OSTI)

#12;Integrated Micro Nano Systems 2 #12;Integrated Micro Nano Systems 3 Val Jones (Ed.) Symposium on Integrated Micro Nano Systems: Convergence of bio and nanotechnologies, Enschede, The Netherlands, June 2006 Micro Nano Systems 4 #12;Integrated Micro Nano Systems 5 Preface In order to explore the convergence

Al Hanbali, Ahmad

266

Integrated Safety Management Workshop Registration, PIA, Idaho...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Integrated Safety Management Workshop Registration, PIA, Idaho National Laboratory Integrated Safety Management Workshop Registration, PIA, Idaho National Laboratory Integrated...

267

Applied Field Research Initiative Deep Vadose Zone  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Applied Field Research Initiative Applied Field Research Initiative Deep Vadose Zone Located on the Hanford Site in Richland, Washington, the Deep Vadose Zone Applied Field Research Initiative (DVZ AFRI) was established to protect water resources by addressing the challenge of preventing contamination in the deep vadose zone from reaching groundwater. Led by the Pacific Northwest National Laboratory, the Initiative is a collaborative effort that leverages Department of Energy (DOE) investments in basic science and applied research and the work of site contractors to address the complex deep vadose zone contamination challenges. Challenge Many vadose zone environments within the DOE complex consist of complex stratified layers of unconsolidated and water-unsaturated sediments that are, in many places, con-

268

Applying System Engineering to Pharmaceutical Safety  

E-Print Network (OSTI)

While engineering techniques are used in the development of medical devices and have been applied to individual healthcare processes, such as the use of checklists in surgery and ICUs, the application of system engineering ...

Couturier, Matthieu

269

Applied Information Security, 1st edition  

Science Conference Proceedings (OSTI)

Applied Information Security guides readers through the installation and basic operation of IT Security software used in the industry today. Dos Commands; Password Auditors; Data Recovery & Secure Deletion; Packet Sniffer; Port Scanners; Vulnerability ...

Randy Boyle

2009-07-01T23:59:59.000Z

270

Baldrige FAQs: Applying for the Award  

Science Conference Proceedings (OSTI)

... often use their feedback reports in their strategic planning processes to focus ... How long does it take to apply for the ... How long will it take to do a self ...

2013-05-21T23:59:59.000Z

271

Applied Virtual Intelligence in Oil & Gas Industry;  

E-Print Network (OSTI)

1 Applied Virtual Intelligence in Oil & Gas Industry; Past, Present, & Future Shahab D. Mohaghegh on a daily basis by almost everyone. Credit Card Fraud Detection Bank Loan Approval Bomb Sniffing Devices

Mohaghegh, Shahab

272

Integrating Management Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Mission Execution by Mission Execution by Integrating our Management Systems Integrating our Management Systems 1 W e e k l y O p e r a t i o n s M e e t i n g N o v e m b e r 1 , 2 0 1 1 M i c h a e l J . W e i s Pulling the Pieces Together for Improving DOE Management to Enable Mission Execution 2  Process changes Process changes  Behavioral changes Behavioral changes  System changes System changes Process Change Approach Strengthening and Expediting Decision Making 3 Proposed Outcomes Horizontal Integration Incoming DOE Business Crosscutting Issues (i.e. NLDC input) Hi-level Roadblocks Operations Management Council Associate Deputy Secretary Collaborative Action Process Chief Operating Officer Weekly Operations Council (OMC) Super 8 Secretary (ADS) (CAP) Board (COOB) p Meeting Endorsement / Commitment Super 8 US Meetings COO Meetings

273

Integrating Program Component Executables  

NLE Websites -- All DOE Office Websites (Extended Search)

Integrating Integrating Program Component Executables on Distributed Memory Architectures via MPH Chris Ding and Yun He Computational Research Division, Lawrence Berkeley National Laboratory University of California, Berkeley, CA 94720, USA chqding@lbl.gov, yhe@lbl.gov Abstract A growing trend in developing large and complex ap- plications on today's Teraflop computers is to integrate stand-alone and/or semi-independent program components into a comprehensive simulation package. One example is the climate system model which consists of atmosphere, ocean, land-surface and sea-ice. Each component is semi- independent and has been developed at different institu- tions. We study how this multi-component multi-executable application can run effectively on distributed memory archi- tectures. We identify five effective execution modes and de- velop the MPH library to support

274

Commercial Buildings Integration Program  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Buildings Buildings Integration Program Arah Schuur Program Manager arah.schuur@ee.doe.gov April 2, 2013 Building Technologies Office Program Peer Review 2 | Building Technologies Office eere.energy.gov Vision Commercial buildings are constructed, operated, renovated and transacted with energy performance in mind and net zero ready commercial buildings are common and cost-effective. Commercial Buildings Integration Program Mission Accelerate voluntary uptake of significant energy performance improvements in existing and new commercial buildings. 3 | Building Technologies Office eere.energy.gov BTO Goals: BTO supports the development and deployment of technologies and systems to reduce

275

Integrated system design report  

DOE Green Energy (OSTI)

The primary objective of the integrated system test phase is to demonstrate the commercial potential of a coal fueled diesel engine in its actual operating environment. The integrated system in this project is defined as a coal fueled diesel locomotive. This locomotive, shown on drawing 41D715542, is described in the separate Concept Design Report. The test locomotive will be converted from an existing oil fueled diesel locomotive in three stages, until it nearly emulates the concept locomotive. Design drawings of locomotive components (diesel engine, locomotive, flatcar, etc.) are included.

Not Available

1989-07-01T23:59:59.000Z

276

Integrated heterodyne terahertz transceiver  

DOE Patents (OSTI)

A heterodyne terahertz transceiver comprises a quantum cascade laser that is integrated on-chip with a Schottky diode mixer. An antenna connected to the Schottky diode receives a terahertz signal. The quantum cascade laser couples terahertz local oscillator power to the Schottky diode to mix with the received terahertz signal to provide an intermediate frequency output signal. The fully integrated transceiver optimizes power efficiency, sensitivity, compactness, and reliability. The transceiver can be used in compact, fieldable systems covering a wide variety of deployable applications not possible with existing technology.

Lee, Mark (Albuquerque, NM); Wanke, Michael C. (Albuquerque, NM)

2009-06-23T23:59:59.000Z

277

Integrated heterodyne terahertz transceiver  

DOE Patents (OSTI)

A heterodyne terahertz transceiver comprises a quantum cascade laser that is integrated on-chip with a Schottky diode mixer. A terahertz signal can be received by an antenna connected to the mixer, an end facet or sidewall of the laser, or through a separate active section that can amplify the incident signal. The quantum cascade laser couples terahertz local oscillator power to the Schottky diode to mix with the received terahertz signal to provide an intermediate frequency output signal. The fully integrated transceiver optimizes power efficiency, sensitivity, compactness, and reliability. The transceiver can be used in compact, fieldable systems covering a wide variety of deployable applications not possible with existing technology.

Wanke, Michael C. (Albuquerque, NM); Lee, Mark (Albuquerque, NM); Nordquist, Christopher D. (Albuquerque, NM); Cich, Michael J. (Albuquerque, NM)

2012-09-25T23:59:59.000Z

278

Smart Grid Integration Laboratory  

Science Conference Proceedings (OSTI)

The initial federal funding for the Colorado State University Smart Grid Integration Laboratory is through a Congressionally Directed Project (CDP), DE-OE0000070 Smart Grid Integration Laboratory. The original program requested in three one-year increments for staff acquisition, curriculum development, and instrumentation ?? all which will benefit the Laboratory. This report focuses on the initial phase of staff acquisition which was directed and administered by DOE NETL/ West Virginia under Project Officer Tom George. Using this CDP funding, we have developed the leadership and intellectual capacity for the SGIC. This was accomplished by investing (hiring) a core team of Smart Grid Systems engineering faculty focused on education, research, and innovation of a secure and smart grid infrastructure. The Smart Grid Integration Laboratory will be housed with the separately funded Integrid Laboratory as part of CSU??s overall Smart Grid Integration Center (SGIC). The period of performance of this grant was 10/1/2009 to 9/30/2011 which included one no cost extension due to time delays in faculty hiring. The Smart Grid Integration Laboratory??s focus is to build foundations to help graduate and undergraduates acquire systems engineering knowledge; conduct innovative research; and team externally with grid smart organizations. Using the results of the separately funded Smart Grid Workforce Education Workshop (May 2009) sponsored by the City of Fort Collins, Northern Colorado Clean Energy Cluster, Colorado State University Continuing Education, Spirae, and Siemens has been used to guide the hiring of faculty, program curriculum and education plan. This project develops faculty leaders with the intellectual capacity to inspire its students to become leaders that substantially contribute to the development and maintenance of Smart Grid infrastructure through topics such as: (1) Distributed energy systems modeling and control; (2) Energy and power conversion; (3) Simulation of electrical power distribution system that integrates significant quantities of renewable and distributed energy resources; (4) System dynamic modeling that considers end-user behavior, economics, security and regulatory frameworks; (5) Best practices for energy management IT control solutions for effective distributed energy integration (including security with the underlying physical power systems); (6) Experimental verification of effects of various arrangements of renewable generation, distributed generation and user load types along with conventional generation and transmission. Understanding the core technologies for enabling them to be used in an integrated fashion within a distribution network remains is a benefit to the future energy paradigm and future and present energy engineers.

Wade Troxell

2011-09-30T23:59:59.000Z

279

NEPAREVIEW LAN-ll-0003 2. CATEGORICAL EXCLUSION BEING APPLIED:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NEPAREVIEW NEPAREVIEW LAN-ll-0003 2. CATEGORICAL EXCLUSION BEING APPLIED: 10 CFR 1021, Appendix B 6.8: Minor operational changes at an existing facility to minimize waste generation and for reuse of materials. These changes include, but are not limited to, adding filtration and recycle piping to allow reuse of machining oil, setting up a sorting area to improve process efficiency, and segregating two waste streams previously mingled and assigning new identification codes to the two resulting wastes. REGULATORY REQUIREMENTS IN 10 CFR 1021.410 (B): 1. The proposed action fits within a class of actions that is listed in Appendix B to Subpart D. For classes of actions listed in Appendix B, the following conditions are integral elements (Le., to fit within a class), the proposal must not:

280

Applying Risk Communication to the Transportation of Radioactive Materials  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Spokesperson Training 6/3/2010 Spokesperson Training 6/3/2010 May 2010 1 National Transportation Stakeholder Forum Chicago, Illinois May 2010 y May 2010 Page 1 Applying Risk Communication Principles Presented by: Ron Edmond Oak Ridge Institute for Science and Education May 2010 Page 2 Spokesperson Training 6/3/2010 May 2010 2  Participants should expect to gain the following skills: following skills:  How to recognize how the stakeholders prefer to receive information  How to integrate risk communication principles into individual communication  How to recognize the importance of earning trust and credibility y  How to identify stakeholders  How to answer questions using a variety of templates designed to keep messages focused May 2010 Page 3 The Chinese word for crisis contains two

Note: This page contains sample records for the topic "integration cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Hamiltonian systems and symplectic integrators  

Science Conference Proceedings (OSTI)

Keywords: Hamiltonian systems, Runge-Kutta type methods, conservation of energy, symplectic integrators, symplectic stability

Peter Grtz; Rudolf Scherer

1997-12-01T23:59:59.000Z

282

Security Outreach and Integration Group  

Science Conference Proceedings (OSTI)

Security Outreach and Integration Group. Welcome. The US economy, citizens, and government rely on information technology. ...

2013-01-17T23:59:59.000Z

283

CNST Researchers Develop Integrated Nanomechanical ...  

Science Conference Proceedings (OSTI)

CNST Researchers Develop Integrated Nanomechanical Sensor for Atomic Force Microscopy. June 1, 2011. ...

2011-06-01T23:59:59.000Z

284

Discontinuous Function Integration  

NLE Websites -- All DOE Office Websites (Extended Search)

Discontinuous Function Integration Discontinuous Function Integration Name: Clarence Status: student Grade: 9-12 Location: CA Country: USA Date: Winter 2011-2012 Question: We know that the area under a continuous function on a certain interval, for instance, [a,b], can be found out by definite integration (taking limit of a sum of areas of rectangles). But when the curve is a discontinuous function, the limit does not exist and is not independent of the choice of the height of rectangle in each delta x. Does it mean that the height in an interval delta x including f(x) of undefined value can be any value so that a limiting value (area under the curve) does not exist? Replies: If I understand your question correctly, here is a way out. The limits of integration are divided into sections [x1,y1] to [x2,y2] over which the function is continuous. Then the next section [x2,y2] to [x3,y3] over which the function is continuous is added to the first section. You can carry this on as long as you need to include each of the separate segments. That is not so hard, but I am not completely sure that is what you are asking. There are some pathological functions where this pasting together does not work so well.

285

Integrated Management Requirements mapping  

Science Conference Proceedings (OSTI)

This document contains five appendices documenting how Sandia implemented the DOE Conduct of Operations (5480.19) and DOE Quality Assurance (5700.6C) orders. It provides a mapping of the Sandia integrated requirements to the specific requirements of each Order and a mapping to Sandia's approved program for implementing the Conduct of Operations Order.

Holmes, J.T.; Andrews, N.S.

1992-06-01T23:59:59.000Z

286

Bioluminescent bioreporter integrated circuit  

DOE Patents (OSTI)

Disclosed are monolithic bioelectronic devices comprising a bioreporter and an OASIC. These bioluminescent bioreporter integrated circuit are useful in detecting substances such as pollutants, explosives, and heavy-metals residing in inhospitable areas such as groundwater, industrial process vessels, and battlefields. Also disclosed are methods and apparatus for environmental pollutant detection, oil exploration, drug discovery, industrial process control, and hazardous chemical monitoring.

Simpson, Michael L. (Knoxville, TN); Sayler, Gary S. (Blaine, TN); Paulus, Michael J. (Knoxville, TN)

2000-01-01T23:59:59.000Z

287

Data Integration Data Analysis  

E-Print Network (OSTI)

Keywords Databases Data Integration Data Analysis Ontology Management » Prof. Dr. Erhard Rahm Prof. Dr. Erhard Rahm and his re- search group focus on advanced methods for data management, in- tegration and analysis of molecular- biological data. They, particularly, have developed comprehensive data

Schüler, Axel

288

Modular Integrated Energy Systems  

E-Print Network (OSTI)

of Honeywell's data collection activity for the integrated energy system (or CHP -- Cooling, Heat and Power recovery steam generator, and a waste heat fired absorption chiller. The key goals of the project are having on-line optimization, · Develop a 1000 Ton exhaust-driven absorption chiller, · Install

Oak Ridge National Laboratory

289

The Integral Fast Reactor  

SciTech Connect

Argonne National Laboratory, since 1984, has been developing the Integral Fast Reactor (IFR). This paper will describe the way in which this new reactor concept came about; the technical, public acceptance, and environmental issues that are addressed by the IFR; the technical progress that has been made; and our expectations for this program in the near term. 5 refs., 3 figs.

Till, C.E.; Chang, Y.I. (Argonne National Lab., IL (USA)); Lineberry, M.J. (Argonne National Lab., Idaho Falls, ID (USA))

1990-01-01T23:59:59.000Z

290

Integral equations for the H- X- and Y-functions  

E-Print Network (OSTI)

We come back to a non linear integral equation satisfied by the function H, which is distinct from the classical H-equation. Established for the first time by Busbridge (1955), it appeared occasionally in the literature since then. First of all, this equation is generalized over the whole complex plane using the method of residues. Then its counterpart in a finite slab is derived; it consists in two series of integral equations for the X- and Y-functions. These integral equations are finally applied to the solution of the albedo problem in a slab.

B. Rutily; L. Chevallier; J. Bergeat

2006-01-16T23:59:59.000Z

291

Applied Process Engineering Laboratory | Open Energy Information  

Open Energy Info (EERE)

Applied Process Engineering Laboratory Applied Process Engineering Laboratory Name Applied Process Engineering Laboratory Address 350 Hills Street, Suite #101 Place Richland, Washington Zip 99354 Region Pacific Northwest Area Coordinates 46.3389754°, -119.2716263° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":46.3389754,"lon":-119.2716263,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

292

Modeling International Relationships in Applied General Equilibrium  

Open Energy Info (EERE)

Modeling International Relationships in Applied General Equilibrium Modeling International Relationships in Applied General Equilibrium (MIRAGE) Jump to: navigation, search LEDSGP green logo.png FIND MORE DIA TOOLS This tool is part of the Development Impacts Assessment (DIA) Toolkit from the LEDS Global Partnership. Tool Summary LAUNCH TOOL Name: Modeling International Relationships in Applied General Equilibrium (MIRAGE) Agency/Company /Organization: International Food Policy Research Institute, Centre d'Etudes Prospectives et d'Informations Internationales (CEPII) Focus Area: Economic Development Topics: Co-benefits assessment, - Macroeconomic Resource Type: Software/modeling tools User Interface: Desktop Application Complexity/Ease of Use: Moderate Website: www.ifpri.org/book-5076/ourwork/program/mirage-model RelatedTo: Global Trade Analysis Project (GTAP) Data Base

293

How to Apply | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

How to Apply How to Apply How to Apply Awards are made through a formal process that has changed dramatically since 2011. So let us walk you through it step by step. "Innovation pays." - John Kao, Innovation Nation Submit a Letter of Intent On October 28, 2013, the U.S. Department of Energy (DOE) announced on the DOE SBIR website a preview version of the technical topics for which it will later accept funding applications. These topics will be found on the DOE's Funding Opportunity Announcements page. The EE SBIR page lists those topics that are cleantech (specific to EERE). We also recommend that you sign up for the EE-SBIR and DOE-SBIR mailing lists. The EE SBIR mailing list signup is at https://public.govdelivery.com/accounts/USEERE/subscriber/new?topic_id=USEERE_442.

294

Applied Field Research Initiative Attenuation Based Remedies  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

PA00133 - March 2011 PA00133 - March 2011 Applied Field Research Initiative Attenuation Based Remedies in the Subsurface Located at the Savannah River Site in Aiken, South Carolina, the Attenuation-Based Remedies in the Subsurface Applied Field Research Initiative (ABRS AFRI) was established to develop the tools, approaches and technologies that will be required to address the technical challenges associated characteriza- tion, remediation and long-term monitoring of recalcitrant compounds in the subsurface at Department of Energy (DOE) Environmental Management (EM) sites. The ABRS AFRI site provides a unique setting for researchers in both applied and basic science fields. A wealth of subsurface data is available to support research activities and remedial decision making.

295

Applied Ventures LLC | Open Energy Information  

Open Energy Info (EERE)

Applied Ventures LLC Applied Ventures LLC Name Applied Ventures LLC Address 3050 Bowers Avenue Place Santa Clara, California Zip 95054 Region Southern CA Area Product Venture capital. Number of employees 1-10 Phone number (408) 727-5555 Website http://www.appliedventures.com Coordinates 37.37751°, -121.978721° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":37.37751,"lon":-121.978721,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

296

Heat Pipe Integrated Microsystems  

SciTech Connect

The trend in commercial electronics packaging to deliver ever smaller component packaging has enabled the development of new highly integrated modules meeting the demands of the next generation nano satellites. At under ten kilograms, these nano satellites will require both a greater density electronics and a melding of satellite structure and function. Better techniques must be developed to remove the subsequent heat generated by the active components required to-meet future computing requirements. Integration of commercially available electronics must be achieved without the increased costs normally associated with current generation multi chip modules. In this paper we present a method of component integration that uses silicon heat pipe technology and advanced flexible laminate circuit board technology to achieve thermal control and satellite structure. The' electronics/heat pipe stack then becomes an integral component of the spacecraft structure. Thermal management on satellites has always been a problem. The shrinking size of electronics and voltage requirements and the accompanying reduction in power dissipation has helped the situation somewhat. Nevertheless, the demands for increased onboard processing power have resulted in an ever increasing power density within the satellite body. With the introduction of nano satellites, small satellites under ten kilograms and under 1000 cubic inches, the area available on which to place hot components for proper heat dissipation has dwindled dramatically. The resulting satellite has become nearly a solid mass of electronics with nowhere to dissipate heat to space. The silicon heat pipe is attached to an aluminum frame using a thermally conductive epoxy or solder preform. The frame serves three purposes. First, the aluminum frame provides a heat conduction path from the edge of the heat pipe to radiators on the surface of the satellite. Secondly, it serves as an attachment point for extended structures attached to the satellite such as solar panels, radiators, antenna and.telescopes (for communications or sensors). Finally, the packages make thermal contact to the surface of the silicon heat pipe through soft thermal pads. Electronic components can be placed on both sides of the flexible circuit interconnect. Silicon heat pipes have a number of advantages over heat pipe constructed from other materials. Silicon heat pipes offer the ability to put the heat pipe structure beneath the active components of a processed silicon wafer. This would be one way of efficiently cooling the heat generated by wafer scale integrated systems. Using this technique, all the functions of a satellite could be reduced to a few silicon wafers. The integration of the heat pipe and the electronics would further reduce the size and weight of the satellite.

Gass, K.; Robertson, P.J.; Shul, R.; Tigges, C.

1999-03-30T23:59:59.000Z

297

Integrated Predictive Demand Response Controller Research Project |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Predictive Demand Response Predictive Demand Response Controller Research Project Integrated Predictive Demand Response Controller Research Project The U.S. Department of Energy (DOE) is currently conducting research into integrated predictive demand response (IPDR) controllers. The project team will attempt to design an IPDR controller so that it can be used in new or existing buildings or in collections of buildings. In the case of collections of buildings, they may be colocated on a single campus or remotely located as long as they are served by a single utility or independent service operator. Project Description This project seeks to perform the necessary applied research, development, and testing to provide a communications interface using industry standard open protocols and emerging National Institute of Standards and Technology

298

Energy Systems Integration | OpenEI Community  

Open Energy Info (EERE)

Energy Systems Integration Energy Systems Integration Home > Features > Groups Content Group Activity By term Q & A Feeds Content type Blog entry Discussion Document Event Poll Question Keywords Author Apply Rmckeel OpenEI maintenance March 8-9, 2013 Posted by: Rmckeel 8 Mar 2013 - 14:23 We would like to inform the OpenEI community that OpenEI will be undergoing a significant software upgrade during a maintenance window this weekend. We will be upgrading the wiki and... Tags: developer, Maintenance, OpenEI Qinsun Research topics related to ESI Posted by: Qinsun 15 Nov 2012 - 13:55 · Modeling and optimization of multiple energy carriers [2-6] · ... Tags: ESI, MarketsIncentives Qinsun Prospects for Nuclear Power(Davis 2012) Posted by: Qinsun 15 Nov 2012 - 13:36 This paper analyzed the potential of nuclear power compare to other type of

299

Aspects of Solitons in Affine Integrable Hierarchies  

E-Print Network (OSTI)

We argue that one of the basic ingredients for the appearance of soliton solutions in integrable hierarchies, is the existence of ``vacuum solutions'' corresponding to Lax operators lying in some abelian subalgebra of the associated affine Kac-Moody algebra. Using the dressing transformation we construct the solutions in the orbit of those vacuum solutions, and conjecture that the solitons correspond to some special points in those orbits. The generalized tau-function for those hierarchies are defined for integrable highest weight representations. It applies for any level of the representation. We illustrate our methods with the recently proposed non abelian Toda models coupled to matter fields. A very special class of such theories possess a U(1) Noether charge that is proportional to a topological charge. That leads to a mechanism that confines the matter fields inside the solitons.

Luiz A. Ferreira; Joaquin Sanchez Guillen

1997-01-10T23:59:59.000Z

300

Integrable Models and the Toda Lattice Hierarchy  

E-Print Network (OSTI)

A pedagogical presentation of integrable models with special reference to the Toda lattice hierarchy has been attempted. The example of the KdV equation has been studied in detail, beginning with the infinite conserved quantities and going on to the Lax formalism for the same. We then go on to symplectic manifolds for which we construct the Lax operator. This formalism is applied to Toda Lattice systems. The Zakharov Shabat formalism aimed at encompassing all integrable models is also covered after which the zero curvature condition and its fallout are discussed. We then take up Toda Field Theories and their connection to W algebras via the Hamiltonian reduction of the WZNW model. Finally, we dwell on the connection between four dimensional Yang Mills theories and the KdV equation along with a generalization to supersymmetry.

Sdermark, B M

2000-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "integration cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Integrable Models and the Toda Lattice Hierarchy  

E-Print Network (OSTI)

A pedagogical presentation of integrable models with special reference to the Toda lattice hierarchy has been attempted. The example of the KdV equation has been studied in detail, beginning with the infinite conserved quantities and going on to the Lax formalism for the same. We then go on to symplectic manifolds for which we construct the Lax operator. This formalism is applied to Toda Lattice systems. The Zakharov Shabat formalism aimed at encompassing all integrable models is also covered after which the zero curvature condition and its fallout are discussed. We then take up Toda Field Theories and their connection to W algebras via the Hamiltonian reduction of the WZNW model. Finally, we dwell on the connection between four dimensional Yang Mills theories and the KdV equation along with a generalization to supersymmetry.

Bani Mitra Sodermark

1999-06-21T23:59:59.000Z

302

Uniform insulation applied-B ion diode  

DOE Patents (OSTI)

An applied-B field extraction ion diode has uniform insulation over an anode surface for increased efficiency. When the uniform insulation is accomplished with anode coils, and a charge-exchange foil is properly placed, and ions may be focused at a point on the z axis.

Seidel, D.B.; Slutz, S.A.

1986-04-11T23:59:59.000Z

303

Uniform insulation applied-B ion diode  

DOE Patents (OSTI)

An applied-B field extraction ion diode has uniform insulation over an anode surface for increased efficiency. When the uniform insulation is accomplished with anode coils, and a charge-exchange foil is properly placed, the ions may be focused at a point on the z axis.

Seidel, David B. (Albuquerque, NM); Slutz, Stephen A. (Albuquerque, NM)

1988-01-01T23:59:59.000Z

304

Applying Adaptive Evolutionary Algorithms to Hard Problems  

E-Print Network (OSTI)

Applying Adaptive Evolutionary Algorithms to Hard Problems J.I. van Hemert1 jvhemert into two distinct parts. The main theme is adaptive evolutionary algorithms. The rst part covers. The second part mainly consists of the development of a library. Its use is aimed at evolutionary algorithms

Emmerich, Michael

305

Roadmap Integration Team Presentation  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Presentation Presentation NP03-00 Slide 1 Generation IV Technology Roadmap NERAC Meeting: Washington, D.C. September 30, 2002 Roadmap Integration Team Presentation NP03-00 Slide 2 NERAC Meeting September 30, 2002 Generation IV Technology Roadmap * Identifies systems deployable by 2030 or earlier * Specifies six systems that offer significant advances towards: - Sustainability - Economics - Safety and reliability - Proliferation resistance and physical protection * Summarizes R&D activities and priorities for the systems * Lays the foundation for Generation IV R&D program plans Roadmap Integration Team Presentation NP03-00 Slide 3 NERAC Meeting September 30, 2002 The Technical Roadmap Report * Discusses the benefits, goals and challenges, and the importance of the fuel cycle * Describes evaluation and selection process

306

Integrated Project Team RM  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Integrated Project Team (IPT) Review Module Integrated Project Team (IPT) Review Module March 2010 CD-0 This R O 0 Review Modul OFFICE OF Inte C CD-1 le was piloted F ENVIRO Standard R grated P Rev Critical Decis CD-2 M at the OR U 23 incorporated ONMENTAL Review Plan Project Te view Module sion (CD) Ap CD March 2010 33 Disposition in the Review L MANAGE n (SRP) eam (IPT e pplicability D-3 Project in 200 Module. EMENT T) CD-4 09. Lessons lea Post Ope arned have been eration n Standard Review Plan, 2 nd Edition, March 2010 i FOREWORD The Standard Review Plan (SRP) 1 provides a consistent, predictable corporate review framework to ensure that issues and risks that could challenge the success of Office of Environmental Management (EM) projects are identified early and addressed proactively. The internal EM

307

Nonlinear integrable ion traps  

Science Conference Proceedings (OSTI)

Quadrupole ion traps can be transformed into nonlinear traps with integrable motion by adding special electrostatic potentials. This can be done with both stationary potentials (electrostatic plus a uniform magnetic field) and with time-dependent electric potentials. These potentials are chosen such that the single particle Hamilton-Jacobi equations of motion are separable in some coordinate systems. The electrostatic potentials have several free adjustable parameters allowing for a quadrupole trap to be transformed into, for example, a double-well or a toroidal-well system. The particle motion remains regular, non-chaotic, integrable in quadratures, and stable for a wide range of parameters. We present two examples of how to realize such a system in case of a time-independent (the Penning trap) as well as a time-dependent (the Paul trap) configuration.

Nagaitsev, S.; /Fermilab; Danilov, V.; /SNS Project, Oak Ridge

2011-10-01T23:59:59.000Z

308

ORNL integrated forecasting system  

SciTech Connect

This paper describes the integrated system for forecasting electric energy and load. In the system, service area models of electrical energy (kWh) and load distribution (minimum and maximum loads and load duration curve) are linked to a state-level model of electrical energy (kWh). Thus, the service area forecasts are conditional upon the state-level forecasts. Such a linkage reduces considerably the data requirements for modeling service area electricity demand.

Rizy, C.G.

1983-01-01T23:59:59.000Z

309

SAMGrid integration of SRMs  

SciTech Connect

SAMGrid is the shared data handling framework of the two large Fermilab Run II collider experiments: DZero and CDF. In production since 1999 at D0, and going into production at CDF, the SAMGrid framework has been adapted over time to accommodate a variety of storage solutions and configurations, as well as the differing data processing models of these two experiments. This has been very successful for both experiments. Backed by primary data repositories of approximately 1 PB in size for each experiment, the SAMGrid framework delivers over 100 TB/day to DZero and CDF analyses at Fermilab and around the world. Each of the storage systems used with SAMGrid, however, has distinct interfaces, protocols, and behaviors. This led to different levels of integration of the various storage devices into the framework, which complicated the exploitation of their functionality and limited in some cases SAMGrid expansion across the experiments Grid. In an effort to simplify the SAMGrid storage interfaces, SAMGrid is adopting the Storage Resource Manager (SRM) concept as the universal interface to all storage devices. This simplifies the SAMGrid framework, especially the implementation of storage device interactions. It prepares the SAMGrid framework for future storage solutions equipped with SRM interfaces, without the need for long and risky software integration projects. In principle, any storage device with an SRM interface can be used with the SAMGrid framework. The integration of SRMs is an important further step towards evolving the SAMGrid framework into a co-operating collection of distinct, modular grid-oriented services. This report outlines how the SRMs are being integrated into the existing SAMGrid framework without disturbing on-going operations.

Kennedy, R.D.; Baranovski, A.; Garzoglio, G.; Illingworth, R.; Kreymer, A.; Kumar, A.; Loebel-Carpenter, L.; Lueking, L.; Lyon, A.; Merritt, W.; Terekhov, I.; Trumbo, J.; Veseli, S.; White, S.; /Fermilab; Burgon-Lyon, M.; St. Denis, R.; /Glasgow U.; Belforte, S.; /INFN, Trieste; Kerzel, U.; /Karlsruhe U.; Bartsch, V.; Leslie, M.; Stonjek, S.; /Oxford

2004-12-01T23:59:59.000Z

310

Integration of Renewables: Preprint  

DOE Green Energy (OSTI)

This is an overview of renewable energy technologies, especially those that can be used for distributed generation of electricity or heat. It This paper reviews the types of technologies, their present usage in the United States, their advantages in terms of resources, availability, modularity, emissions, and integration in distributed energy systems. It reviews some of the history of their use and projects their growth and cost.

Bull, S.

2004-11-01T23:59:59.000Z

311

Integrated Deployment | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Integrated Deployment Integrated Deployment Integrated Deployment Integrated technology deployment uses a comprehensive approach to implement a variety of efficiency and renewable energy technology solutions in communities and cities, federal agencies, international locations, and states and territories. need_alt Community Renewable Energy Deployment Webinars Hear about successful community renewable energy projects, including the challenges and barriers faced during development. Learn more Integrated Deployment Projects The following projects provide examples of how the U.S. Department of Energy (DOE) and the National Renewable Energy Laboratory have used an integrated approach to address various location-specific energy challenges that is both scalable and replicable around the world:

312

Integrated Assessment | Open Energy Information  

Open Energy Info (EERE)

Integrated Assessment Integrated Assessment Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Integrated Assessment: Mainstreaming sustainability into policymaking--A guidance manual Agency/Company /Organization: United Nations Environment Programme Topics: Background analysis Website: www.unep.ch/etb/publications/AI%20guidance%202009/UNEP%20IA%20final.pd Equivalent URI: cleanenergysolutions.org/content/times-integrated-assessment-model-0,h Language: English Policies: Deployment Programs DeploymentPrograms: Technical Assistance References: Integrated Assessment[1] The Times Integrated Assessment Model (TIAM) comprises several thousand technologies in all sectors of the energy system. It is characterized by several technical and economic parameters and by emission coefficients for

313

Integral Transforms in Relativistic Quantum Constraint Mechanics  

E-Print Network (OSTI)

In relativistic quantum constraint mechanics the state of a physical system is constrained to a 3-dimensional subspace of Minkowski 4-space. Fourier transformation can be used to relate this state between constraint spaces in 4-position and 4-momentum space. It is shown that integral transforms of this nature can be carried out using Lorentz-invariant 3-dimensional constraint space coordinates such that a complete equivalence class of 4-space representations can be constructed from the transform. This method is further applied to develop a relativistic generalization of the Segal-Bargmann transformation that leads to the representation of quantum systems in a three-dimensional subspace of Bargmann 4-space.

Robert J. Ducharme

2011-01-29T23:59:59.000Z

314

Integrated safeguards and security management plan  

Science Conference Proceedings (OSTI)

Berkeley Lab is committed to scientific excellence and stewardship of its assets. While security principles apply to all work performed at the Laboratory, their implementation is flexible. Berkeley Lab adheres to the following principles: Line management owns security; Security roles and responsibilities are clearly defined and communicated; Security functions are integrated; An open environment supports the Laboratory's Mission; The security program must support the scientific and operational missions of the Laboratory and must be value added; and Security controls are tailored to individual and facility requirements.

Bowen, Sue, editor

2001-04-16T23:59:59.000Z

315

Buried Waste Integrated Demonstration stakeholder involvement model  

Science Conference Proceedings (OSTI)

The Buried Waste Integrated Demonstration (BWID) is a program funded by the US Department of Energy (DOE) Office of Technology Development. BWID supports the applied research, development, demonstration, and evaluation of a suite of advanced technologies that together form a comprehensive remediation system for the effective and efficient remediation of buried waste. Stakeholder participation in the DOE Environmental Management decision-making process is critical to remediation efforts. Appropriate mechanisms for communication with the public, private sector, regulators, elected officials, and others are being aggressively pursued by BWID to permit informed participation. This document summarizes public outreach efforts during FY-93 and presents a strategy for expanded stakeholder involvement during FY-94.

Kaupanger, R.M.; Kostelnik, K.M.; Milam, L.M.

1994-04-01T23:59:59.000Z

316

Integrated Deployment and the Energy Systems Integration Facility: Workshop Proceedings  

SciTech Connect

This report summarizes the workshop entitled: Integrated Deployment and the Energy Systems Integration Facility. In anticipation of the opening of the ESIF, NREL held the workshop August 21-23, 2012 and invited participants from utilities, government, industry, and academia to discuss renewable integration challenges and discover new ways to meet them by taking advantage of the ESIF's capabilities.

Kroposki, B.; Werner, M.; Spikes, A.; Komomua, C.

2013-01-01T23:59:59.000Z

317

A modified boundary integral evolution formulation for the wave equation  

Science Conference Proceedings (OSTI)

We apply a modified boundary integral formulation otherwise known as the Green element method (GEM) to the solution of the two-dimensional scalar wave equation. GEM essentially combines three techniques namely: (a) finite difference approximation of ... Keywords: Boundary element method, Green element method, Overhauser elements, Wave equation

Okey Oseloka Onyejekwe

2009-07-01T23:59:59.000Z

318

Integrating phonological knowledge in ASR systems for Spanish language  

Science Conference Proceedings (OSTI)

In this paper we undertake the use of phonological features applied to speech recognition in Spanish language. We investigate two different ways to integrate these phonological features into an HMM based speech recognition system. We also propose a method ... Keywords: acoustic modeling, phonological features, speech recognition

Javier Mikel Olaso; Mara Ins Torres

2010-11-01T23:59:59.000Z

319

Integrating ISA Server 2006 with Microsoft Exchange 2007  

Science Conference Proceedings (OSTI)

This book is a convenient, targeted, single-source guide to integrating Microsoft's ISA Server with Exchange 2007 SP1. Unlike longwinded "comprehensive resources" it doesn't waste time re-hashing general information on the architectures and purposes ... Keywords: Applied, Computer Architecture, Computer Science, Computers, Information Management, Operating Systems, Security, Viruses

Fergus Strachan

2008-05-01T23:59:59.000Z

320

January 2005 INTEGRATING IT SECURITY  

E-Print Network (OSTI)

January 2005 INTEGRATING IT SECURITY INTO THE CAPITAL PLANNING AND INVESTMENT CONTROL PROCESS By Joan S. Hash, Computer Security Division, Information Technology Laboratory, National Institute of Standards and Technology Introduction To assist federal agencies with effec tively integrating security

Note: This page contains sample records for the topic "integration cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Categorical Exclusion Determinations: National Energy Technology Laboratory  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

30, 2013 30, 2013 CX-010824: Categorical Exclusion Determination Manufacturing Process for Organic Light-Emitting Diode (OLED) Integrated Substrate CX(s) Applied: B3.6 Date: 07/30/2013 Location(s): New Jersey Offices(s): National Energy Technology Laboratory July 30, 2013 CX-010823: Categorical Exclusion Determination Manufacturing Process for Organic Light-Emitting Diode (OLED) Integrated Substrate CX(s) Applied: B3.6 Date: 07/30/2013 Location(s): Pennsylvania Offices(s): National Energy Technology Laboratory July 30, 2013 CX-010822: Categorical Exclusion Determination Manufacturing Process for Organic Light-Emitting Diode (OLED) Integrated Substrate CX(s) Applied: B3.6 Date: 07/30/2013 Location(s): Illinois Offices(s): National Energy Technology Laboratory July 30, 2013 CX-010821: Categorical Exclusion Determination

322

Categorical Exclusion Determinations: National Energy Technology Laboratory  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

January 13, 2010 January 13, 2010 CX-000726: Categorical Exclusion Determination A Novel Integrated Oxy-Combustion Flue Gas Purification Technology: A Near-Zero Emissions Pathway CX(s) Applied: B3.6 Date: 01/13/2010 Location(s): Birmingham, Alabama Office(s): Fossil Energy, National Energy Technology Laboratory January 13, 2010 CX-000727: Categorical Exclusion Determination A Novel Integrated Oxy-Combustion Flue Gas Purification Technology: A Near-Zero Emissions Pathway CX(s) Applied: A9 Date: 01/13/2010 Location(s): Bridgewater, New Jersey Office(s): Fossil Energy, National Energy Technology Laboratory January 13, 2010 CX-000728: Categorical Exclusion Determination A Novel Integrated Oxy-Combustion Flue Gas Purification Technology: A Near-Zero Emissions Pathway CX(s) Applied: A9

323

Categorical Exclusion Determinations: Fossil Energy | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

January 13, 2010 January 13, 2010 CX-000727: Categorical Exclusion Determination A Novel Integrated Oxy-Combustion Flue Gas Purification Technology: A Near-Zero Emissions Pathway CX(s) Applied: A9 Date: 01/13/2010 Location(s): Bridgewater, New Jersey Office(s): Fossil Energy, National Energy Technology Laboratory January 13, 2010 CX-000728: Categorical Exclusion Determination A Novel Integrated Oxy-Combustion Flue Gas Purification Technology: A Near-Zero Emissions Pathway CX(s) Applied: A9 Date: 01/13/2010 Location(s): Perryville, New Jersey Office(s): Fossil Energy, National Energy Technology Laboratory January 13, 2010 CX-000729: Categorical Exclusion Determination A Novel Integrated Oxy-Combustion Flue Gas Purification Technology: A Near-Zero Emissions Pathway CX(s) Applied: A9

324

Categorical Exclusion Determinations: National Energy Technology Laboratory  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

16, 2011 16, 2011 CX-006772: Categorical Exclusion Determination Coal-Based Integrated Gasification Fuel Cell Project: Phase II CX(s) Applied: B3.6 Date: 09/16/2011 Location(s): Fenton Township, Michigan Office(s): Fossil Energy, National Energy Technology Laboratory September 16, 2011 CX-006771: Categorical Exclusion Determination Coal-Based Integrated Gasification Fuel Cell Project: Phase II CX(s) Applied: B3.6 Date: 09/16/2011 Location(s): Brighton, New York Office(s): Fossil Energy, National Energy Technology Laboratory September 16, 2011 CX-006770: Categorical Exclusion Determination Coal-Based Integrated Gasification Fuel Cell Project: Phase II CX(s) Applied: B3.6 Date: 09/16/2011 Location(s): South Windsor, Connecticut Office(s): Fossil Energy, National Energy Technology Laboratory

325

Categorical Exclusion Determinations: B3.6 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

19, 2010 19, 2010 CX-001310: Categorical Exclusion Determination Low-Cost Integrated Substrate for Organic Light-Emitting Diode (OLED) Lighting (Ewing) CX(s) Applied: B3.6 Date: 03/19/2010 Location(s): Ewing, New Jersey Office(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory March 19, 2010 CX-001309: Categorical Exclusion Determination Low-Cost Integrated Substrate for Organic Light-Emitting Diode (OLED) Lighting (Monroeville) CX(s) Applied: B3.6 Date: 03/19/2010 Location(s): Monroeville, Pennsylvania Office(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory March 19, 2010 CX-001307: Categorical Exclusion Determination Low-Cost Integrated Substrate for Organic Light-Emitting Diode (OLED) Lighting (Harmar) CX(s) Applied: B3.6

326

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

July 30, 2013 July 30, 2013 CX-010824: Categorical Exclusion Determination Manufacturing Process for Organic Light-Emitting Diode (OLED) Integrated Substrate CX(s) Applied: B3.6 Date: 07/30/2013 Location(s): New Jersey Offices(s): National Energy Technology Laboratory July 30, 2013 CX-010823: Categorical Exclusion Determination Manufacturing Process for Organic Light-Emitting Diode (OLED) Integrated Substrate CX(s) Applied: B3.6 Date: 07/30/2013 Location(s): Pennsylvania Offices(s): National Energy Technology Laboratory July 30, 2013 CX-010822: Categorical Exclusion Determination Manufacturing Process for Organic Light-Emitting Diode (OLED) Integrated Substrate CX(s) Applied: B3.6 Date: 07/30/2013 Location(s): Illinois Offices(s): National Energy Technology Laboratory July 30, 2013

327

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3, 2010 3, 2010 CX-000727: Categorical Exclusion Determination A Novel Integrated Oxy-Combustion Flue Gas Purification Technology: A Near-Zero Emissions Pathway CX(s) Applied: A9 Date: 01/13/2010 Location(s): Bridgewater, New Jersey Office(s): Fossil Energy, National Energy Technology Laboratory January 13, 2010 CX-000728: Categorical Exclusion Determination A Novel Integrated Oxy-Combustion Flue Gas Purification Technology: A Near-Zero Emissions Pathway CX(s) Applied: A9 Date: 01/13/2010 Location(s): Perryville, New Jersey Office(s): Fossil Energy, National Energy Technology Laboratory January 13, 2010 CX-000729: Categorical Exclusion Determination A Novel Integrated Oxy-Combustion Flue Gas Purification Technology: A Near-Zero Emissions Pathway CX(s) Applied: A9 Date: 01/13/2010

328

Apply for Beam Time | Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

Apply for Beam Time Apply for Beam Time NEXT PROPOSAL DEADLINE: March 7, 2014 @ 11:59 PM (Chicago time) Submit Proposal » SEE ALSO: Calendar: deadlines, run & review dates Help Page: frequently asked questions, tips for success, common errors, blank forms, instructions Review Criteria Sectors Directory: check CAT websites for info about managed beam time The Run 2014-2 proposal submission deadline is 11:59 p.m. (Chicago time) March 7, 2014. The system will open to accept proposals beginning December 20, 2013. NEW USERS: to avoid delays and to make the most of your time on site, read Become a User. You must register as a user and receive a badge number before submitting a proposal. About the Beam Time Request Process All beam time at the APS must be requested each cycle through the web-based

329

Title Page Applied and Environmental Microbiology 1  

NLE Websites -- All DOE Office Websites (Extended Search)

Applied and Environmental Microbiology 1 Applied and Environmental Microbiology 1 2 Title Natural Competence in Thermoanaerobacter and Thermoanaerobacterium Species 3 Running Title Thermonanerobacter Natural Competence 4 5 Authors and Affiliations 6 A. Joe Shaw 1,2 , David A. Hogsett 1 , Lee R. Lynd 1,2,3 * 7 1 Mascoma Corporation, Lebanon, NH 03766 8 2 Thayer School of Engineering, Dartmouth College, Hanover, NH 03755 9 3 Department of Biological Sciences, Dartmouth College, Hanover, NH 03755 10 11 Corresponding Author 12 Lee R. Lynd 13 Thayer School of Engineering, Dartmouth College, Hanover, NH 03755 14 Phone: 603.646.2231 15 Email: lee.lynd@dartmouth.edu 16 17 18 19 20 21 22 23 Copyright © 2010, American Society for Microbiology and/or the Listed Authors/Institutions. All Rights Reserved.

330

Applying DSM evaluation results to utility planning  

SciTech Connect

This paper describes the results of a study to assess the application of DSM evaluation results to utility forecasting and planning. The paper has three objectives: (1) identify forecasting and planning applications of evaluation studies, (2) identify major obstacles and problems associated with applying evaluation results to forecasting and planning, and (3) suggest approaches to address the major problems. The paper summarizes results from interviews with utilities, regulators, and consultants to determine how the utility industry currently applies evaluation results in forecasting and planning. The paper also includes results from a detailed case study of Sacramento Municipal Utility District (SMUD) and Southern California Edison Company (SCE), two utilities with large DSM programs and active evaluation efforts.

Baxter, L.W.

1995-07-01T23:59:59.000Z

331

Fundamental & Applied Bioenergy | Clean Energy | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Bioenergy Bioenergy SHARE Fundamental and Applied Bioenergy Steven Brown (left) and Shihui Yang have developed a microbial strain with an improved ability to convert wood products to biofuel as part of research within the DOE BioEnergy Science Center.Source: ORNL News article ORNL researchers are investigating the biological mechanisms underlying production of biofuels so that those mechanisms can be improved and used to develop a new generation of efficient bioenergy strategies that will reduce U.S. dependence on foreign oil and help curb carbon emissions. Fundamental and applied bioenergy research at ORNL includes studies conducted within the BioEnergy Science Center and the following research areas: Bioconversion Science and Technology Plant-Microbe Interfaces

332

Integrating Materials and Manufacturing Innovation  

Science Conference Proceedings (OSTI)

Jun 13, 2012 ... 06/13 - TMS Launches New Open Access Journal: Integrating Materials and Manufacturing Innovation. Patti Dobranski Communication...

333

Integrated Computational Materials Engineering (ICME)  

Science Conference Proceedings (OSTI)

Presentation Title, Integrated Computational Materials Engineering (ICME) in the Automotive Industry: Successes and Opportunities. Author(s), Louis Gerard...

334

Development of an integrated capillary valve-based preconcentrator and surface-based immunoassay  

E-Print Network (OSTI)

A new generation of integrated preconcentrator and immunoassay was developed. A novel, self-aligned method for patterning Nafion resin was developed and applied to create a preconcentrator. In a parallel effort, a surface-based ...

Liu, Vincent Hok

2009-01-01T23:59:59.000Z

335

National conference on integrated resource planning: Proceedings  

Science Conference Proceedings (OSTI)

Until recently, state regulators have focused most of their attention on the development of least-cost or integrated resource planning (IRP) processes for electric utilities. A number of commissions are beginning to scrutinize the planning processes of local gas distribution companies (LDCs) because of the increased control that LDCs have over their purchased gas costs (as well as the associated risks) and because of questions surrounding the role and potential of gas end-use efficiency options. Traditionally, resource planning (LDCs) has concentrated on options for purchasing and storing gas. Integrated resource planning involves the creation of a process in which supply-side and demand-side options are integrated to create a resource mix that reliably satisfies customers' short-term and long-term energy service needs at the lowest cost. As applied to gas utilities, an integrated resource plan seeks to balance cost and reliability, and should not be interpreted simply as the search for lowest commodity costs. The National Association of Regulatory Utility Commissioners' (NARUC) Energy Conservation committee asked Lawrence Berkeley Laboratory (LBL) to survey state PUCs to determine the extent to which they have undertaken least cost planning for gas utilities. The survey included the following topics: status of state PUC least-cost planning regulations and practices for gas utilities; type and scope of natural gas DSM programs in effect, including fuel substitution; economic tests and analysis methods used to evaluate DSM programs; relationship between prudency reviews of gas utility purchasing practices and integrated resource planning; key regulatory issued facing gas utilities during the next five years.

Not Available

1991-01-01T23:59:59.000Z

336

National conference on integrated resource planning: Proceedings  

Science Conference Proceedings (OSTI)

Until recently, state regulators have focused most of their attention on the development of least-cost or integrated resource planning (IRP) processes for electric utilities. A number of commissions are beginning to scrutinize the planning processes of local gas distribution companies (LDCs) because of the increased control that LDCs have over their purchased gas costs (as well as the associated risks) and because of questions surrounding the role and potential of gas end-use efficiency options. Traditionally, resource planning (LDCs) has concentrated on options for purchasing and storing gas. Integrated resource planning involves the creation of a process in which supply-side and demand-side options are integrated to create a resource mix that reliably satisfies customers` short-term and long-term energy service needs at the lowest cost. As applied to gas utilities, an integrated resource plan seeks to balance cost and reliability, and should not be interpreted simply as the search for lowest commodity costs. The National Association of Regulatory Utility Commissioners` (NARUC) Energy Conservation committee asked Lawrence Berkeley Laboratory (LBL) to survey state PUCs to determine the extent to which they have undertaken least cost planning for gas utilities. The survey included the following topics: status of state PUC least-cost planning regulations and practices for gas utilities; type and scope of natural gas DSM programs in effect, including fuel substitution; economic tests and analysis methods used to evaluate DSM programs; relationship between prudency reviews of gas utility purchasing practices and integrated resource planning; key regulatory issued facing gas utilities during the next five years.

Not Available

1991-12-31T23:59:59.000Z

337

Residential Buildings Integration Program  

NLE Websites -- All DOE Office Websites (Extended Search)

David Lee David Lee Program Manager David.Lee@ee.doe.gov 202-287-1785 April 2, 2013 Residential Buildings Integration Program Building Technologies Office Program Peer Review 2 | Building Technologies Office eere.energy.gov Sub-Programs for Review Better Buildings Neighborhood Program Building America Challenge Home Home Energy Score Home Performance with ENERGY STAR Solar Decathlon 3 | Building Technologies Office eere.energy.gov How Residential Buildings Fits into BTO Research & Development * Develop technology roadmaps * Prioritize opportunities * Solicit and select innovative technology solutions * Collaborate with researchers

338

Scientific Innovation Through Integration  

NLE Websites -- All DOE Office Websites (Extended Search)

pnnl.gov pnnl.gov Cell Isolation and Systems Analysis Multi-photon fluorescence microscope: Seamlessly integrates nonlinear two-photon excitation, laser scanning confocal microscopy and fluorescence lifetime imaging (FLIM) for minimally invasive and deep-penetrating 3D imaging of living tissues and cells as well as quantitative investigation of molecular interaction dynamics by fluorescence resonance energy transfer (FRET) in living cells. Transcriptional profiling using next-generation sequencing technology (RNA-Seq): Offers massively parallel next-generation sequencing platforms for unbiased and quantitative profiling of gene expression patterns in prokaryotic and eukaryotic cells, complete with facilities for sample preparation as well as data processing and analysis.

339

Integrated optical XY coupler  

DOE Patents (OSTI)

An integrated optical XY coupler having two converging input waveguide arms meeting in a central section and a central output waveguide arm and two diverging flanking output waveguide arms emanating from the central section. In-phase light from the input arms constructively interfers in the central section to produce a single mode output in the central output arm with the rest of the light being collected in the flanking output arms. Crosstalk between devices on a substrate is minimized by this collection of the out-of-phase light by the flanking output arms of the XY coupler.

Vawter, G. Allen (Albuquerque, NM); Hadley, G. Ronald (Albuquerque, NM)

1997-01-01T23:59:59.000Z

340

Repast vector GIS integration.  

Science Conference Proceedings (OSTI)

Repast now supports the reading, writing, and display of shapefile data. In the Repast-GIS integration, these tasks are generally broken up into two different classes, a data class, and a display class. The data class allows data to be read into Repast from the GIS, and written out from Repast into a GIS format. The current implementation of GIS in Repast is focused on two systems: ESRI ArcMap and OpenMap. This paper will elucidate how to use each of these systems with Repast.

Najlis, R.; North, M. J.; Decision and Information Sciences

2005-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "integration cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Integrated Assessment Modeling  

Science Conference Proceedings (OSTI)

This paper discusses the role of Integrated Assessment models (IAMs) in climate change research. IAMs are an interdisciplinary research platform, which constitutes a consistent scientific framework in which the large-scale interactions between human and natural Earth systems can be examined. In so doing, IAMs provide insights that would otherwise be unavailable from traditional single-discipline research. By providing a broader view of the issue, IAMs constitute an important tool for decision support. IAMs are also a home of human Earth system research and provide natural Earth system scientists information about the nature of human intervention in global biogeophysical and geochemical processes.

Edmonds, James A.; Calvin, Katherine V.; Clarke, Leon E.; Janetos, Anthony C.; Kim, Son H.; Wise, Marshall A.; McJeon, Haewon C.

2012-10-31T23:59:59.000Z

342

Residential Buildings Integration Program  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

David Lee David Lee Program Manager David.Lee@ee.doe.gov 202-287-1785 April 2, 2013 Residential Buildings Integration Program Building Technologies Office Program Peer Review 2 | Building Technologies Office eere.energy.gov Sub-Programs for Review Better Buildings Neighborhood Program Building America Challenge Home Home Energy Score Home Performance with ENERGY STAR Solar Decathlon 3 | Building Technologies Office eere.energy.gov How Residential Buildings Fits into BTO Research & Development * Develop technology roadmaps * Prioritize opportunities * Solicit and select innovative technology solutions * Collaborate with researchers

343

HLW System Integrated Project Team  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

l l W S Hi h l W S High Level Waste System High Level Waste System Integrated Project Team Integrated Project Team Integrated Project Team Integrated Project Team Steve Schneider Steve Schneider Office of Engineering and Technology High Level Waste Corporate Board March 5, 2009 This document is intended for planning and analysis purposes, assuming a continuing constrained budget environment. Every effort will be made to comply with all applicable environmental and legal obligations, while also assuring that essential functions necessary to protect human health, the environment and national security are maintained. 1 Introduction Introduction Introduction Introduction Challenges and Priorities High Level Waste Strategic Initiative Results High Level Waste System Integrated

344

Integrating preconcentrator heat controller  

DOE Patents (OSTI)

A method and apparatus for controlling the electric resistance heating of a metallic chemical preconcentrator screen, for example, used in portable trace explosives detectors. The length of the heating time-period is automatically adjusted to compensate for any changes in the voltage driving the heating current across the screen, for example, due to gradual discharge or aging of a battery. The total deposited energy in the screen is proportional to the integral over time of the square of the voltage drop across the screen. Since the net temperature rise, .DELTA.T.sub.s, of the screen, from beginning to end of the heating pulse, is proportional to the total amount of heat energy deposited in the screen during the heating pulse, then this integral can be calculated in real-time and used to terminate the heating current when a pre-set target value has been reached; thereby providing a consistent and reliable screen temperature rise, .DELTA.T.sub.s, from pulse-to-pulse.

Bouchier, Francis A. (Albuquerque, NM); Arakaki, Lester H. (Edgewood, NM); Varley, Eric S. (Albuquerque, NM)

2007-10-16T23:59:59.000Z

345

Hybridization of autoregressive integrated moving average (ARIMA) with probabilistic neural networks (PNNs)  

Science Conference Proceedings (OSTI)

Autoregressive integrated moving average (ARIMA) models are one of the most important time series models applied in financial market forecasting over the past three decades. Improving forecasting especially time series forecasting accuracy is an important ... Keywords: Autoregressive integrated moving average (ARIMA), Hybrid models, Probabilistic neural networks (PNNs), Time series forecasting

Mehdi Khashei; Mehdi Bijari; Gholam Ali Raissi Ardali

2012-08-01T23:59:59.000Z

346

Integrated self-cleaning window assembly for optical transmission in combustion environments  

DOE Patents (OSTI)

An integrated window design for optical transmission in combustion environments is described. The invention consists of an integrated optical window design that prevents and removes the accumulation of carbon-based particulate matter and gaseous hydrocarbons through a combination of heat and catalysis. These windows will enable established optical technologies to be applied to combustion environments and their exhaust systems.

Kass, Michael D [Oak Ridge, TN

2007-07-24T23:59:59.000Z

347

Market integration in the international coal industry: A cointegration approach  

SciTech Connect

The purpose of this paper is to test the hypothesis of the existence of a single economic market for the international coal industry, separated for coking and steam coal, and to investigate market integration over time. This has been conducted by applying cointegration and error-correction models on quarterly price series data in Europe and Japan over the time period 1980-2000. Both the coking and the steam coal markets show evidence of global market integration, as demonstrated by the stable long-run cointegrating relationship between the respective price series in different world regions. This supports the hypothesis of a globally integrated market. However, when analyzing market integration over time it is not possible to confirm cointegration in the 1990s for steam coal. Thus, compared to the coking coal market, the steam coal market looks somewhat less global in scope.

Warell, L. [University of Lulea, Lulea (Sweden). Dept. of Business Administration & Social Science

2006-07-01T23:59:59.000Z

348

Statistical Uncertainty Analysis Applied to Criticality Calculation  

Science Conference Proceedings (OSTI)

In this paper, we present an uncertainty methodology based on a statistical approach, for assessing uncertainties in criticality prediction using monte carlo method due to uncertainties in the isotopic composition of the fuel. The methodology has been applied to criticality calculations with MCNP5 with additional stochastic input of the isotopic fuel composition. The stochastic input were generated using the latin hypercube sampling method based one the probability density function of each nuclide composition. The automatic passing of the stochastic input to the MCNP and the repeated criticality calculation is made possible by using a python script to link the MCNP and our latin hypercube sampling code.

Hartini, Entin; Andiwijayakusuma, Dinan; Susmikanti, Mike; Nursinta, A. W. [Centre for Nuclear Informatics Development, National Nuclear Energy Agency of Indonesia (Indonesia)

2010-06-22T23:59:59.000Z

349

Applied Environmental Microbiology | VIMSS - Virtual Institute for  

NLE Websites -- All DOE Office Websites (Extended Search)

Collection of Soil Samples Collection of Soil Samples Identification of Natural Stressors Profiling of Microbial Population Field and Simulated Conceptual Model Facilities The Applied Environmental Microbiology (AEM) Core is the source of environmental data and samples that determine the stressors that will be studied, pro-vides the environments for growing the organisms to be tested, simulates stressed environments, and verifies the conceptual models to determine how these stress regulatory pathways control the biogeochemistry of contaminated sites. The specific goals of the AEM Core are to: Survey and map DOE sites contaminated by metals and radionuclides using chemical and molecular/ microbiological parameters to determine major microbial populations and potential stressors for Desulfovibrio vulgaris,

350

Fuel Cell Technologies Office: Systems Integration  

NLE Websites -- All DOE Office Websites (Extended Search)

Systems Integration to someone by E-mail Share Fuel Cell Technologies Office: Systems Integration on Facebook Tweet about Fuel Cell Technologies Office: Systems Integration on...

351

NREL: Energy Systems Integration - Residential and Commercial...  

NLE Websites -- All DOE Office Websites (Extended Search)

Residential and Commercial Integration Energy systems integration R&D at the small-scale, residential and commercial integration level encompasses diverse technologies such as...

352

A Case Study of the Applied Learning Academy: Reconceptualized Quantum Design of Applied Learning  

E-Print Network (OSTI)

The purpose of this qualitative study was to examine the Applied Learning Academy (ALA) and allow the lessons learned from this public school to emerge from the narrative stories of past students, parents, teachers, administrators, and local business associates who have been directly involved and influenced by the applied learning teaching method. Accountability is critical for all public and charter schools. Districts have been trying to raise the standards with new programs and strategies in an effort to make learning experiences relevant to students? daily lives. Revisiting John Dewey?s philosophy from the progressive movement, project-based, service learning, community partnerships, and portfolio assessment helped to create the applied learning method. In the present study, a qualitative case study approach was utilized to identify successful factors, benefits, and drawbacks of applied learning in order to describe the transition of portfolio assessment, project-based learning, and community-based partnerships within the classroom and to understand the impact and misconceptions of applied learning as experienced through the Recognized Campus, ALA, a 6-8th public middle school within a large urban school district. Participant interviews, field observations, and historical records were collected which indicated that student centered project-based curriculum, small school size creating family relationships, community involvement with partnerships, service learning projects, and metacognitive development from portfolio assessments were the major factors that supported academic rigor and relevance because of the real educational applications in this applied learning middle school. Briefly defined, applied learning is when a problem is seen within the surrounding community, and the solution is generated by the students. This progressive 15-year impact of applied learning ultimately leads to the development of four applied learning schools despite the misconception that applied learning was a remedial or gifted program. Redefining applied learning for a better understanding developed a reconceptualized diagram borrowed from the quantum mechanics model. Reconceptualization expands the interpretation by increasing the intellectual flexibility. As the student becomes energized from the acquired knowledge of learning applicable skills through service learning, project-based curriculum, and portfolio assessment, the student?s academic growth should increase to a higher, educational ?energy level? supported by the critical, situated-learning, and feminist theories.

Gordon, Denise

2009-12-01T23:59:59.000Z

353

The Applied Mathematics for Power Systems (AMPS)  

SciTech Connect

Increased deployment of new technologies, e.g., renewable generation and electric vehicles, is rapidly transforming electrical power networks by crossing previously distinct spatiotemporal scales and invalidating many traditional approaches for designing, analyzing, and operating power grids. This trend is expected to accelerate over the coming years, bringing the disruptive challenge of complexity, but also opportunities to deliver unprecedented efficiency and reliability. Our Applied Mathematics for Power Systems (AMPS) Center will discover, enable, and solve emerging mathematics challenges arising in power systems and, more generally, in complex engineered networks. We will develop foundational applied mathematics resulting in rigorous algorithms and simulation toolboxes for modern and future engineered networks. The AMPS Center deconstruction/reconstruction approach 'deconstructs' complex networks into sub-problems within non-separable spatiotemporal scales, a missing step in 20th century modeling of engineered networks. These sub-problems are addressed within the appropriate AMPS foundational pillar - complex systems, control theory, and optimization theory - and merged or 'reconstructed' at their boundaries into more general mathematical descriptions of complex engineered networks where important new questions are formulated and attacked. These two steps, iterated multiple times, will bridge the growing chasm between the legacy power grid and its future as a complex engineered network.

Chertkov, Michael [Los Alamos National Laboratory

2012-07-24T23:59:59.000Z

354

EG G Mound Applied Technologies payroll system  

SciTech Connect

EG G Mound Applied Technologies, Inc., manages and operates the Mound Facility, Miamisburg, Ohio, under a cost-plus-award-fee contract administered by the Department of Energy's Albuquerque Field Office. The contractor's Payroll Department is responsible for prompt payment in the proper amount to all persons entitled to be paid, in compliance with applicable laws, regulations, and legal decisions. The objective was to determine whether controls were in place to avoid erroneous payroll payments. EG G Mound Applied Technologies, Inc., did not have all the internal controls required by General Accounting Office Title 6, Pay, Leave, and Allowances.'' Specifically, they did not have computerized edits, separation of duties and responsibilities, and restricted access to payroll data files. This condition occurred because its managers were not aware of Title 6 requirements. As a result, the contractor could not assure the Department of Energy that payroll costs were processes accurately; and fraud, waste, or abuse of Department of Energy funds could go undetected. Our sample of 212 payroll transactions from a population of 66,000 in FY 1991 disclosed only two minor processing errors and no instances of fraud, waste or abuse.

Not Available

1992-02-07T23:59:59.000Z

355

Integrated Safety Management  

NLE Websites -- All DOE Office Websites (Extended Search)

ISM Day: March 10, 2010 ISM Day: March 10, 2010 ISM Day: June 6, 2008 Integrated Safety Management (ISM) Seven Principles of ISM Five Functions of ISM "Define the Scope of Work" Is the work clearly defined? Authorized? Do I know how to do the job? Do I have the proper equipment? Support? Have there been problems with tasks like this? "Analyze the Hazards" What are the hazards of the job? What can go wrong? Has the job been reviewed by a qualified person? "Develop Hazard Controls" Are all the necessary controls in place? (LOTO, PPE, Procedures etc.) Do I know what the controls are, and how to use them? What if something unexpected goes wrong? "Perform Work" Has the system responded as expected? How do I know? When will I call for assistance or stop work?

356

CLASIC DATA INTEGRATION  

NLE Websites -- All DOE Office Websites (Extended Search)

Precipitating Clouds in the Southern Great Plains Region Oklahoma Radar Facilities S-band: Operational WSR-88D Network KOUN Polarimetric (NSSL) MPAR Phased Array (NSSL) C-band: Polarimetric (OU/EEC) Mobile SMART-R (OU et. al) TDWR (FAA) X-band: CASA Polarimetric IP1 Mobile Polarimetric (NSSL) Ka-band: MMCR, Central Facility (ARM) W-band: WACR, Central Facility (ARM) Profiler: ARM, NOAA Oklahoma Instrumentation Oklahoma Mesonet (Oklahoma) ARS Micronet (USDA) ARM SGP Facilities (DOE) Oklahoma Lightning Mapping Array, NLDN NOAA Profiler Network Kessler Farm Field Laboratory ASOS, AWOS, AWSS (FAA/NWS/DOD) ARM & Oklahoma Dataset Integration: Examples Oklahoma Radar  CASA radars offer unique 2D/3D wind retrieval

357

Integrated Facilities Disposition Program  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Facilities Facilities Disposition Program Tank Waste Corporate Board Meeting at ORNL Sharon Robinson Dirk Van Hoesen Robert Jubin Brad Patton July 29, 2009 2 Managed by UT-Battelle for the U.S. Department of Energy The Integrated Facility Disposition Program (IFDP) addresses the remaining EM Scope at both ORNL and Y-12 Cost Range: $7 - $14B Schedule: 26 Years 3 Managed by UT-Battelle for the U.S. Department of Energy Scope of work * Treatment and disposition of legacy materials and waste * D&D 327 (1.5 M ft 2 ) excess facilities generating >2 M yd 3 debris * Soil and groundwater remedial actions generating >1 M yd 3 soils * Facilities surveillance and maintenance * Reconfiguration of waste management facilities * Ongoing waste management operations * Project management

358

Georeactor Variability and Integrity  

E-Print Network (OSTI)

As a deep-Earth energy source, the planetocentric nuclear-fission georeactor concept is on a more secure scientific footing than the previous idea related to the assumed growth of the inner core. Unlike previously considered deep-Earth energy sources, which are essentially constant on a human time-scale, variability in nuclear fission reactors can arise from changes in composition and/or position of fuel, moderators, and neutron absorbers. Tantalizing circumstantial evidence invites inquiry into the possibility of short-term planetocentric nuclear fission reactor variability. This brief communication emphasizes the importance of scientific integrity and highlights the possibility of variable georeactor power output so that these might be borne in mind in future investigations, especially those related to the Earth's heat flux.

J. Marvin Herndon

2005-10-04T23:59:59.000Z

359

Georeactor Variability and Integrity  

E-Print Network (OSTI)

As a deep-Earth energy source, the planetocentric nuclear-fission georeactor concept is on a more secure scientific footing than the previous idea related to the assumed growth of the inner core. Unlike previously considered deep-Earth energy sources, which are essentially constant on a human time-scale, variability in nuclear fission reactors can arise from changes in composition and/or position of fuel, moderators, and neutron absorbers. Tantalizing circumstantial evidence invites inquiry into the possibility of short-term planetocentric nuclear fission reactor variability. This brief communication emphasizes the importance of scientific integrity and highlights the possibility of variable georeactor power output so that these might be borne in mind in future investigations, especially those related to the Earth's heat flux.

Herndon, J M

2005-01-01T23:59:59.000Z

360

Classicalization via Path Integral  

E-Print Network (OSTI)

Recently, it was suggested that a large class of non-renormalizable theories may need no UV completion. By analogy with gravity where classical black holes are expected to be created in high-energy scatterings, it is conjectured that similar classical solutions, so-called classicalons, should occur. In this way the theory protects itself against non-unitarity, for instead of probing small distances at high energies one enters a classical regime. An effective theory of Goldstone bosons provides and example in which the size of classicalons grows with energy, and the high energy scattering is cut-off by small momenta, inversely proportional to the classicalon size. In this note we offer an alternative, path integral discussion of this important result.

Borut Bajc; Arshad Momen; Goran Senjanovi?

2011-02-17T23:59:59.000Z

Note: This page contains sample records for the topic "integration cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Classicalization via Path Integral  

E-Print Network (OSTI)

Recently, it was suggested that a large class of non-renormalizable theories may need no UV completion. By analogy with gravity where classical black holes are expected to be created in high-energy scatterings, it is conjectured that similar classical solutions, so-called classicalons, should occur. In this way the theory protects itself against non-unitarity, for instead of probing small distances at high energies one enters a classical regime. An effective theory of Goldstone bosons provides and example in which the size of classicalons grows with energy, and the high energy scattering is cut-off by small momenta, inversely proportional to the classicalon size. In this note we offer an alternative, path integral discussion of this important result.

Bajc, Borut; Senjanovi?, Goran

2011-01-01T23:59:59.000Z

362

Integrated optical sensor  

SciTech Connect

An integrated optical sensor for arc welding having multifunction feedback control. The sensor, comprising generally a CCD camera and diode laser, is positioned behind the arc torch for measuring weld pool position and width, standoff distance, and post-weld centerline cooling rate. Computer process information from this sensor is passed to a controlling computer for use in feedback control loops to aid in the control of the welding process. Weld pool position and width are used in a feedback loop, by the weld controller, to track the weld pool relative to the weld joint. Sensor standoff distance is used in a feedback loop to control the contact tip to base metal distance during the welding process. Cooling rate information is used to determine the final metallurgical state of the weld bead and heat affected zone, thereby controlling post-weld mechanical properties.

Watkins, Arthur D. (Idaho Falls, ID); Smartt, Herschel B. (Idaho Falls, ID); Taylor, Paul L. (Idaho Falls, ID)

1994-01-01T23:59:59.000Z

363

Integrated optical sensor  

DOE Patents (OSTI)

An integrated optical sensor for arc welding having multifunction feedback control is described. The sensor, comprising generally a CCD camera and diode laser, is positioned behind the arc torch for measuring weld pool position and width, standoff distance, and post-weld centerline cooling rate. Computer process information from this sensor is passed to a controlling computer for use in feedback control loops to aid in the control of the welding process. Weld pool position and width are used in a feedback loop, by the weld controller, to track the weld pool relative to the weld joint. Sensor standoff distance is used in a feedback loop to control the contact tip to base metal distance during the welding process. Cooling rate information is used to determine the final metallurgical state of the weld bead and heat affected zone, thereby controlling post-weld mechanical properties. 6 figures.

Watkins, A.D.; Smartt, H.B.; Taylor, P.L.

1994-01-04T23:59:59.000Z

364

Integrated fluorescence analysis system  

DOE Patents (OSTI)

An integrated fluorescence analysis system enables a component part of a sample to be virtually sorted within a sample volume after a spectrum of the component part has been identified from a fluorescence spectrum of the entire sample in a flow cytometer. Birefringent optics enables the entire spectrum to be resolved into a set of numbers representing the intensity of spectral components of the spectrum. One or more spectral components are selected to program a scanning laser microscope, preferably a confocal microscope, whereby the spectrum from individual pixels or voxels in the sample can be compared. Individual pixels or voxels containing the selected spectral components are identified and an image may be formed to show the morphology of the sample with respect to only those components having the selected spectral components. There is no need for any physical sorting of the sample components to obtain the morphological information.

Buican, Tudor N. (Los Alamos, NM); Yoshida, Thomas M. (Los Alamos, NM)

1992-01-01T23:59:59.000Z

365

201/span>3 Short Course Applied Fundamentals in Interfacial Phenomena  

Science Conference Proceedings (OSTI)

Applied Fundamentals in Interfacial Phenomena Short Course held at the 104th AOCS Annual Meeting and Expo. 201/span>3 Short Course Applied Fundamentals in Interfacial Phenomena Applied Fundamentals in Interfacial Phenomena Saturday

366

NREL: Electricity Integration Research - Facilities  

NLE Websites -- All DOE Office Websites (Extended Search)

Facilities Facilities NREL's electricity integration research is conducted in state-of-the-art facilities. These facilities assist industry in the development of power systems and address the operational challenges of full system integration. The Energy Systems Integration Facility can be used to design, test, and analyze components and systems to enable economic, reliable integration of renewable electricity, fuel production, storage, and building efficiency technologies with the U.S. electricity delivery infrastructure. New grid integration capabilities at the National Wind Technology Center will allow testing of many grid integration aspects of multi-megawatt, utility-scale variable renewable generation and storage technologies. The Distributed Energy Resources Test Facility can be used to characterize,

367

Applied Energy Management | Open Energy Information  

Open Energy Info (EERE)

Management Management Jump to: navigation, search Name Applied Energy Management Place Huntersville, North Carolina Zip 28078 Sector Efficiency, Renewable Energy Product North Carolina-based, energy efficiency and renewable energy service and construction company. Coordinates 35.409853°, -80.842716° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":35.409853,"lon":-80.842716,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

368

How to Apply for ENERGY STAR® Certification  

NLE Websites -- All DOE Office Websites (Extended Search)

ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü "How To" Series How to Apply for ENERGY STAR ® Certification Commercial buildings that earn EPA's ENERGY STAR certification perform in the top 25 percent of similar buildings nationwide, as verified by a Licensed Professional (a Professional Engineer or a Registered Architect). ENERGY STAR certified buildings use an average of 35 percent less energy and are responsible for 35 percent fewer greenhouse gas emissions than average buildings. To qualify for the ENERGY STAR, a property must achieve an ENERGY STAR score of 75 or higher on EPA's 1 - 100 scale, which compares a property's energy performance to

369

FY 1990 Applied Sciences Branch annual report  

DOE Green Energy (OSTI)

The Applied Sciences Branch actively supports the advancement of DOE/SERI goals for the development and implementation of the solar photovoltaic technology. The primary focus of the laboratories is to provide state-of-the-art analytical capabilities for materials and device characterization and fabrication. The branch houses a comprehensive facility which is capable of providing information on the full range of photovoltaic components. A major objective of the branch is to aggressively pursue collaborative research with other government laboratories, universities, and industrial firms for the advancement of photovoltaic technologies. Members of the branch disseminate research findings to the technical community in publications and presentations. This report contains information on surface and interface analysis, materials characterization, development, electro-optical characterization module testing and performance, surface interactions and FTIR spectroscopy.

Keyes, B.M.; Dippo, P.C. (eds.)

1991-11-01T23:59:59.000Z

370

SunShot Initiative: Distribution Grid Integration  

NLE Websites -- All DOE Office Websites (Extended Search)

Distribution Grid Integration to Distribution Grid Integration to someone by E-mail Share SunShot Initiative: Distribution Grid Integration on Facebook Tweet about SunShot Initiative: Distribution Grid Integration on Twitter Bookmark SunShot Initiative: Distribution Grid Integration on Google Bookmark SunShot Initiative: Distribution Grid Integration on Delicious Rank SunShot Initiative: Distribution Grid Integration on Digg Find More places to share SunShot Initiative: Distribution Grid Integration on AddThis.com... Concentrating Solar Power Photovoltaics Systems Integration Research, Development, & Demonstration Distribution Grid Integration Transmission Grid Integration Solar Resource Assessment Technology Validation Power Electronics & Balance of System Hardware Technologies Competitive Awards

371

SunShot Initiative: Transmission Grid Integration  

NLE Websites -- All DOE Office Websites (Extended Search)

Transmission Grid Integration to Transmission Grid Integration to someone by E-mail Share SunShot Initiative: Transmission Grid Integration on Facebook Tweet about SunShot Initiative: Transmission Grid Integration on Twitter Bookmark SunShot Initiative: Transmission Grid Integration on Google Bookmark SunShot Initiative: Transmission Grid Integration on Delicious Rank SunShot Initiative: Transmission Grid Integration on Digg Find More places to share SunShot Initiative: Transmission Grid Integration on AddThis.com... Concentrating Solar Power Photovoltaics Systems Integration Research, Development, & Demonstration Distribution Grid Integration Transmission Grid Integration Solar Resource Assessment Technology Validation Power Electronics & Balance of System Hardware Technologies Competitive Awards

372

Remediation of Mercury and Industrial Contaminants Applied Field...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Remediation of Mercury and Industrial Contaminants Applied Field Research Initiative (RoMIC-AFRI) Remediation of Mercury and Industrial Contaminants Applied Field Research...

373

Computational Advances in Applied Energy | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Advances in Applied Energy Computational Advances in Applied Energy Friedmann-LLNL-SEAB.10.11.pdf More Documents & Publications Director's Perspective by George Miller...

374

Applying physics, teamwork to fusion energy science | Princeton...  

NLE Websites -- All DOE Office Websites (Extended Search)

Applying physics, teamwork to fusion energy science American Fusion News Category: Massachusetts Institute of Technology (MIT) Link: Applying physics, teamwork to fusion energy...

375

Attenuation-Based Remedies in the Subsurface Applied Field Research...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Subsurface Applied Field Research Initiative (ABRS AFRI) Located at the Savannah River Site in Aiken, South Carolina, the Attenuation-Based Remedies in the Subsurface Applied...

376

Applying Climate Information for Adaptation Decision-Making:...  

Open Energy Info (EERE)

Applying Climate Information for Adaptation Decision-Making: A Guidance and Resource Document Jump to: navigation, search Tool Summary Name: Applying Climate Information for...

377

Advanced Integrated Traction System  

SciTech Connect

The United States Department of Energy elaborates the compelling need for a commercialized competitively priced electric traction drive system to proliferate the acceptance of HEVs, PHEVs, and FCVs in the market. The desired end result is a technically and commercially verified integrated ETS (Electric Traction System) product design that can be manufactured and distributed through a broad network of competitive suppliers to all auto manufacturers. The objectives of this FCVT program are to develop advanced technologies for an integrated ETS capable of 55kW peak power for 18 seconds and 30kW of continuous power. Additionally, to accommodate a variety of automotive platforms the ETS design should be scalable to 120kW peak power for 18 seconds and 65kW of continuous power. The ETS (exclusive of the DC/DC Converter) is to cost no more than $660 (55kW at $12/kW) to produce in quantities of 100,000 units per year, should have a total weight less than 46kg, and have a volume less than 16 liters. The cost target for the optional Bi-Directional DC/DC Converter is $375. The goal is to achieve these targets with the use of engine coolant at a nominal temperature of 105C. The system efficiency should exceed 90% at 20% of rated torque over 10% to 100% of maximum speed. The nominal operating system voltage is to be 325V, with consideration for higher voltages. This project investigated a wide range of technologies, including ETS topologies, components, and interconnects. Each technology and its validity for automotive use were verified and then these technologies were integrated into a high temperature ETS design that would support a wide variety of applications (fuel cell, hybrids, electrics, and plug-ins). This ETS met all the DOE 2010 objectives of cost, weight, volume and efficiency, and the specific power and power density 2015 objectives. Additionally a bi-directional converter was developed that provides charging and electric power take-off which is the first step towards enabling a smart-grid application. GM under this work assessed 29 technologies; investigated 36 configurations/types power electronics and electric machines, filed 41 invention disclosures; and ensured technology compatibility with vehicle production. Besides the development of a high temperature ETS the development of industrial suppliers took place because of this project. Suppliers of industrial power electronic components are numerous, but there are few that have traction drive knowledge. This makes it difficult to achieve component reliability, durability, and cost requirements necessary of high volume automotive production. The commercialization of electric traction systems for automotive industry requires a strong diverse supplier base. Developing this supplier base is dependent on a close working relationship between the OEM and supplier so that appropriate component requirements can be developed. GM has worked closely with suppliers to develop components for electric traction systems. Components that have been the focus of this project are power modules, capacitors, heavy copper boards, current sensors, and gate drive and controller chip sets. Working with suppliers, detailed component specifications have been developed. Current, voltage, and operation environment during the vehicle drive cycle were evaluated to develop higher resolution/accurate component specifications.

Greg Smith; Charles Gough

2011-08-31T23:59:59.000Z

378

NREL: Energy Systems Integration - Events  

NLE Websites -- All DOE Office Websites (Extended Search)

Events NREL hosts events that promote understanding and collaboration on energy systems integration. Through seminars, workshops, and other educational opportunities, industry...

379

NREL: Energy Systems Integration - News  

NLE Websites -- All DOE Office Websites (Extended Search)

News Energy Systems Integration eNewsletter is a quarterly newsletter designed to keep industry partners, stakeholders, associations, and educational institutes up to date on the...

380

NREL: Transmission Grid Integration - Webmaster  

NLE Websites -- All DOE Office Websites (Extended Search)

reply. Your name: Your email address: Your message: Send Message Printable Version Transmission Grid Integration Home Issues Projects Research Staff Working with Us Publications...

Note: This page contains sample records for the topic "integration cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

NREL: Energy Systems Integration - Workshops  

NLE Websites -- All DOE Office Websites (Extended Search)

Systems Integration Facility (ESIF) workshops. October 2012: Increasing the Value of Microgrids through Focused RD&D Information included an overview of commercial microgrids,...

382

Biomass Pretreatment for Integrated Steelmaking  

Science Conference Proceedings (OSTI)

Presentation Title, Biomass Pretreatment for Integrated Steelmaking. Author(s), Shiju Thomas, Paul Cha, Steven J McKnight, Vincent A Bouma, Andrew L Petrik,

383

Data Integration using Web Services  

E-Print Network (OSTI)

In this paper we examine the opportunities for data integration in the context of the emerging Web Services systems development paradigm. The paper introduces the ...

Hansen, Mark

2003-02-10T23:59:59.000Z

384

Integrated Safety Management (ISM) - Oversight  

NLE Websites -- All DOE Office Websites (Extended Search)

Oversight Integrated Safety Management (ISM) ism logo DOE Oversight Policy PDF (P 226.1B) DOE Oversight Order PDF (O 226.1B) Draft CRADs...

385

Fuel Pathways Integration Tech Team  

NLE Websites -- All DOE Office Websites (Extended Search)

- Roxanne Danz (DOE) - Dale Gardner (DOE Systems Integration) - Don Gardner (ExxonMobil) - Johanna Ivy (NREL) - Melissa Lott (QSS Group) - Graham Moore (ChevronTexaco) -...

386

The use of software agents and distributed objects to integrate enterprises: Compatible or competing technologies?  

SciTech Connect

Distributed object and software agent technologies are two integration methods for connecting enterprises. The two technologies have overlapping goals--interoperability and architectural support for integrating software components--though to date little or no integration of the two technologies has been made at the enterprise level. The primary difference between these two technologies is that distributed object technologies focus on the problems inherent in connecting distributed heterogeneous systems whereas software agent technologies focus on the problems involved with coordination and knowledge exchange across domain boundaries. This paper addresses the integration of these technologies in support of enterprise integration across organizational and geographic boundaries. The authors discuss enterprise integration issues, review their experiences with both technologies, and make recommendations for future work. Neither technology is a panacea. Good software engineering techniques must be applied to integrate an enterprise because scalability and a distributed software development team are realities.

Pancerella, C.M.

1998-04-01T23:59:59.000Z

387

Integrated fuel processor development.  

DOE Green Energy (OSTI)

The Department of Energy's Office of Advanced Automotive Technologies has been supporting the development of fuel-flexible fuel processors at Argonne National Laboratory. These fuel processors will enable fuel cell vehicles to operate on fuels available through the existing infrastructure. The constraints of on-board space and weight require that these fuel processors be designed to be compact and lightweight, while meeting the performance targets for efficiency and gas quality needed for the fuel cell. This paper discusses the performance of a prototype fuel processor that has been designed and fabricated to operate with liquid fuels, such as gasoline, ethanol, methanol, etc. Rated for a capacity of 10 kWe (one-fifth of that needed for a car), the prototype fuel processor integrates the unit operations (vaporization, heat exchange, etc.) and processes (reforming, water-gas shift, preferential oxidation reactions, etc.) necessary to produce the hydrogen-rich gas (reformate) that will fuel the polymer electrolyte fuel cell stacks. The fuel processor work is being complemented by analytical and fundamental research. With the ultimate objective of meeting on-board fuel processor goals, these studies include: modeling fuel cell systems to identify design and operating features; evaluating alternative fuel processing options; and developing appropriate catalysts and materials. Issues and outstanding challenges that need to be overcome in order to develop practical, on-board devices are discussed.

Ahmed, S.; Pereira, C.; Lee, S. H. D.; Krumpelt, M.

2001-12-04T23:59:59.000Z

388

Systems Integration Methodology  

Science Conference Proceedings (OSTI)

A multi-disciplinary team led by the Advanced Power and Energy Program (APEP) of the University of California at Irvine is defining the system engineering issues associated with the integration of key components and subsystems into power plant systems that meet performance and emission goals of VISION 21. The myriad of fuels, fuel processing, power generation, and emission control technologies are narrowed down to selected scenarios by a screening analysis to identify those combinations that have the potential to achieve the VISION 21 goals consisting of 60% efficiency (HHV) for coal based systems and 75% efficiency (LHV) for gas-based systems. The selected promising cycle scenarios are then analyzed in detail to develop the performance and costs for each. The methodology used in arriving at these promising cases and the preliminary results of the cycle analyses are presented. The technology levels considered are based on projected technical and manufacturing advances being made in industry and on advances identified in current and future government supported research such as the Clean Coal Program, Combustion 2000 (LEBS and HIPPS), Advanced Turbine Systems program, Low-Cost Advanced Fuel Cell programs, and the Flexible Gas Turbine Systems program. Examples of systems included in these advanced cycles are solid oxide and molten carbonate fuel cells, advanced gas turbines, ion transport membrane separation and hydrogen-oxygen combustion.

Samuelsen, Scott; Rao, Ashok

2001-11-06T23:59:59.000Z

389

Repast Vector GIS Integration  

E-Print Network (OSTI)

This paper will elucidate the creation of agents based on GIS data, as well as how to work with and display those agents. Specific attention is given to the usage of both ArcMap and OpenMap. Contact: 9700 S. Cass Avenue, Argonne, IL 60439 Tel: 1-917-703-4633 Email: rnajlis@anl.gov Key Words: Agent-Based Modeling and Simulation, Repast, GIS, Geographic Information Systems, Repast, ArcMap, OpenMap Robert Najlis, Michael J. North Repast now supports the reading, writing, and display of shapefile data. In the Repast-GIS integration, these tasks are generally broken up into two different classes, a data class, and a display class. The data class allows data to be read into Repast from the GIS, and written out from Repast into a GIS format. The current implementation of GIS in Repast is focused on two systems: ESRI ArcMap and OpenMap. This paper will elucidate how to use each of these systems with Repast. Getting started: Choosing your data and display classes Each GIS system used with Re

Robert Najlis; Robert Najlis; Robert Najlis; Michael J. North; Michael J. North

2005-01-01T23:59:59.000Z

390

Categorical Exclusion Determinations: A9 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

13, 2010 13, 2010 CX-000728: Categorical Exclusion Determination A Novel Integrated Oxy-Combustion Flue Gas Purification Technology: A Near-Zero Emissions Pathway CX(s) Applied: A9 Date: 01/13/2010 Location(s): Perryville, New Jersey Office(s): Fossil Energy, National Energy Technology Laboratory January 13, 2010 CX-000729: Categorical Exclusion Determination A Novel Integrated Oxy-Combustion Flue Gas Purification Technology: A Near-Zero Emissions Pathway CX(s) Applied: A9 Date: 01/13/2010 Location(s): Livingston, New Jersey Office(s): Fossil Energy, National Energy Technology Laboratory January 12, 2010 CX-006426: Categorical Exclusion Determination Ohio-City-Elyria CX(s) Applied: A1, A9, A11, B1.32, B5.1 Date: 01/12/2010 Location(s): Elyria, Ohio Office(s): Energy Efficiency and Renewable Energy

391

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

15, 2013 15, 2013 CX-009906: Categorical Exclusion Determinatio Optimized Co-Processing of Algal Bio-Crude through a Petroleum Refinery CX(s) Applied: A9, B3.6, B5.15 Date: 01/15/2013 Location(s): California, New Mexico Offices(s): Golden Field Office January 15, 2013 CX-009860: Categorical Exclusion Determination Cost-Effective Treatment of Flowback and Produced Water via an Integrated Precipitative Supercritical Process CX(s) Applied: A9, A11, B3.6 Date: 01/15/2013 Location(s): Ohio Offices(s): National Energy Technology Laboratory January 15, 2013 CX-009859: Categorical Exclusion Determination Cost-Effective Treatment of Flowback and Produced Water via an Integrated Precipitative Supercritical Process CX(s) Applied: A9, A11 Date: 01/15/2013 Location(s): Kentucky Offices(s): National Energy Technology Laboratory

392

Categorical Exclusion Determinations: Pennsylvania | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

March 19, 2010 March 19, 2010 CX-001308: Categorical Exclusion Determination Low-Cost Integrated Substrate for Organic Light-Emitting Diode (OLED) Lighting (Allison Park) CX(s) Applied: A2, A9 Date: 03/19/2010 Location(s): Allison Park, Pennsylvania Office(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory March 19, 2010 CX-001307: Categorical Exclusion Determination Low-Cost Integrated Substrate for Organic Light-Emitting Diode (OLED) Lighting (Harmar) CX(s) Applied: B3.6 Date: 03/19/2010 Location(s): Harmar, Pennsylvania Office(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory March 17, 2010 CX-001328: Categorical Exclusion Determination Fischer Tropsch Laboratory CX(s) Applied: B3.6 Date: 03/17/2010 Location(s): Pittsburgh, Pennsylvania

393

Categorical Exclusion Determinations: B3.6 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

23, 2012 23, 2012 CX-008491: Categorical Exclusion Determination Carbon Dioxide Capture from Integrated Gasification Combined Cycle Gas Streams Using the Ammonium Carbonate-Ammonium Bicarbonate Process CX(s) Applied: B3.6 Date: 07/23/2012 Location(s): Alabama Offices(s): National Energy Technology Laboratory July 23, 2012 CX-008490: Categorical Exclusion Determination Carbon Dioxide Capture from Integrated Gasification Combined Cycle Gas Streams Using the Ammonium Carbonate-Ammonium Bicarbonate Process CX(s) Applied: B3.6 Date: 07/23/2012 Location(s): California Offices(s): National Energy Technology Laboratory July 20, 2012 CX-009068: Categorical Exclusion Determination Hydrogen Charging Tritium Contaminated Metals CX(s) Applied: B3.6 Date: 07/20/2012 Location(s): South Carolina

394

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

August 1, 2013 August 1, 2013 CX-010819: Categorical Exclusion Determination Technology Integration Program - Field Trial - Site Three CX(s) Applied: B3.1, B3.6 Date: 08/01/2013 Location(s): Texas Offices(s): National Energy Technology Laboratory August 1, 2013 CX-010835: Categorical Exclusion Determination Disconnect Equipment and Activate Gloveboxes From Lab 174, Gloveboxes 12 & 13 CX(s) Applied: B2.3 Date: 08/01/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office August 1, 2013 CX-010834: Categorical Exclusion Determination 704-L Machine Shop Equipment Removal CX(s) Applied: B1.24 Date: 08/01/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office August 1, 2013 CX-010818: Categorical Exclusion Determination Technology Integration Program - Field Trial - Site Three

395

Categorical Exclusion Determinations: B3.6 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

July 30, 2013 July 30, 2013 CX-010825: Categorical Exclusion Determination High-Pressure Turbulent Flame Speeds and Chemical Kinetics of Syngas Blends With and Without Impurities CX(s) Applied: B3.6 Date: 07/30/2013 Location(s): Texas Offices(s): National Energy Technology Laboratory July 30, 2013 CX-010824: Categorical Exclusion Determination Manufacturing Process for Organic Light-Emitting Diode (OLED) Integrated Substrate CX(s) Applied: B3.6 Date: 07/30/2013 Location(s): New Jersey Offices(s): National Energy Technology Laboratory July 30, 2013 CX-010823: Categorical Exclusion Determination Manufacturing Process for Organic Light-Emitting Diode (OLED) Integrated Substrate CX(s) Applied: B3.6 Date: 07/30/2013 Location(s): Pennsylvania Offices(s): National Energy Technology Laboratory

396

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1, 2013 1, 2013 CX-010818: Categorical Exclusion Determination Technology Integration Program - Field Trial - Site Three CX(s) Applied: B3.1 Date: 08/01/2013 Location(s): Texas Offices(s): National Energy Technology Laboratory August 1, 2013 CX-010833: Categorical Exclusion Determination Subcontractor Will Clean Out Gutters Causing Leaks in 706-N CX(s) Applied: B1.3 Date: 08/01/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office August 1, 2013 CX-010832: Categorical Exclusion Determination Subcontractor Will Perform Roof Leak Repairs on 717-8N CX(s) Applied: B1.3 Date: 08/01/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office August 1, 2013 CX-010817: Categorical Exclusion Determination Technology Integration Program - Field Trial - Site Three

397

Categorical Exclusion Determinations: National Energy Technology Laboratory  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

21, 2013 21, 2013 CX-010780: Categorical Exclusion Determination Advanced Analytical Methods for Air and Stray Gas Emissions and Produced Brine Characterization CX(s) Applied: A9, A11, B3.6 Date: 08/21/2013 Location(s): Oklahoma Offices(s): National Energy Technology Laboratory August 21, 2013 CX-010782: Categorical Exclusion Determination A Geomechanical Model for Gas Shales Based on Integration of Stress CX(s) Applied: A9 Date: 08/21/2013 Location(s): Texas Offices(s): National Energy Technology Laboratory August 20, 2013 CX-010783: Categorical Exclusion Determination Isothermal Compressed Air Energy Storage (ICAES) to Support Renewable Energy Integration - Phase Three CX(s) Applied: B3.6, B5.1 Date: 08/20/2013 Location(s): New Hampshire Offices(s): National Energy Technology Laboratory

398

Categorical Exclusion Determinations: B1.7 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

November 21, 2011 November 21, 2011 CX-007697: Categorical Exclusion Determination Autogrid, Inc. - Highly Dispatchable and Distributed Demand Response for the Integration of Distributed Generation CX(s) Applied: A9, B1.7 Date: 11/21/2011 Location(s): New York, California Offices(s): Advanced Research Projects Agency-Energy November 17, 2011 CX-007365: Categorical Exclusion Determination Integration of the Green Lane Energy Biogas Generator CX(s) Applied: B1.7 Date: 11/17/2011 Location(s): Oregon Offices(s): Bonneville Power Administration September 23, 2011 CX-006826: Categorical Exclusion Determination State Energy Program American Recovery and Reinvestment Act - Washington State University Anaerobic Digester - Nutrient Recovery Technology CX(s) Applied: A9, B1.7, B5.1 Date: 09/23/2011

399

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

81 - 10090 of 29,416 results. 81 - 10090 of 29,416 results. Download CX-008284: Categorical Exclusion Determination E85 (Ethanol) Retail Fueling Infrastructure Installation CX(s) Applied: B5.22 Date: 05/01/2012 Location(s): Florida Offices(s): National Energy Technology Laboratory http://energy.gov/nepa/downloads/cx-008284-categorical-exclusion-determination Download CX-008286: Categorical Exclusion Determination Technology Integration Program CX(s) Applied: A9, A11, B3.6 Date: 05/01/2012 Location(s): Tennessee Offices(s): National Energy Technology Laboratory http://energy.gov/nepa/downloads/cx-008286-categorical-exclusion-determination Download CX-008287: Categorical Exclusion Determination Technology Integration Program CX(s) Applied: A9 Date: 05/01/2012 Location(s): CX: none Offices(s): National Energy Technology Laboratory

400

Categorical Exclusion Determinations: Oregon | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

December 14, 2011 December 14, 2011 CX-007413: Categorical Exclusion Determination Transforming Photovoltaic Installations Toward Discpatchable, Schedulable Energy Solutions CX(s) Applied: A9, B3.6 Date: 12/14/2011 Location(s): Oregon Offices(s): Golden Field Office December 2, 2011 CX-007355: Categorical Exclusion Determination Modification of Metering Systems in Canby, Oregon CX(s) Applied: B1.7 Date: 12/02/2011 Location(s): Oregon Offices(s): Bonneville Power Administration December 2, 2011 CX-007354: Categorical Exclusion Determination Integration of the Farm Power Tillamook Generating Facility CX(s) Applied: B1.7 Date: 12/02/2011 Location(s): Oregon Offices(s): Bonneville Power Administration December 1, 2011 CX-007358: Categorical Exclusion Determination Integration of the University of Oregon's Cogeneration Project

Note: This page contains sample records for the topic "integration cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Categorical Exclusion Determinations: A9 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

June 8, 2013 June 8, 2013 CX-010456: Categorical Exclusion Determination Trident: A Human Factors Decision Aid Integrating Deepwater Drilling Tasks, Incidents, and Literature CX(s) Applied: A9, A11 Date: 06/08/2013 Location(s): California Offices(s): National Energy Technology Laboratory June 8, 2013 CX-010454: Categorical Exclusion Determination Trident: A Human Factors Decision Aid Integrating Deepwater Drilling Tasks, Incidents, and Literature CX(s) Applied: A9, A11 Date: 06/08/2013 Location(s): Texas Offices(s): National Energy Technology Laboratory June 3, 2013 CX-010507: Categorical Exclusion Determination Development and Demonstration of Smart Grid Inverters for High-Penetration Photovoltaic Applications CX(s) Applied: A9, B3.6, B5.16 Date: 06/03/2013 Location(s): Hawaii

402

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

41 - 7250 of 28,560 results. 41 - 7250 of 28,560 results. Download CX-010621: Categorical Exclusion Determination Pittsburgh Site Wide Exterior Door Repair/Replacement Project CX(s) Applied: B2.1, B2.5 Date: 07/17/2013 Location(s): Pennsylvania Offices(s): National Energy Technology Laboratory http://energy.gov/nepa/downloads/cx-010621-categorical-exclusion-determination Download CX-010817: Categorical Exclusion Determination Technology Integration Program - Field Trial - Site Three CX(s) Applied: A9 Date: 08/01/2013 Location(s): Texas Offices(s): National Energy Technology Laboratory http://energy.gov/nepa/downloads/cx-010817-categorical-exclusion-determination Download CX-010819: Categorical Exclusion Determination Technology Integration Program - Field Trial - Site Three CX(s) Applied: B3.1, B3.6

403

FE Categorical Exclusions | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3, 2011 3, 2011 CX-007124: Categorical Exclusion Determination Predicting Log Porosity and Saturations from Mud Logs and Drilling Rates Using Artificial Intelligence CX(s) Applied: A9 Date: 10/03/2011 Location(s): Socorro, New Mexico Office(s): Fossil Energy September 30, 2011 CX-006878: Categorical Exclusion Determination Integrated Gasification Combined Cycle Affordability and Availability CX(s) Applied: A9 Date: 09/30/2011 Location(s): Schenectady, New York Office(s): Fossil Energy, National Energy Technology Laboratory September 30, 2011 CX-006877: Categorical Exclusion Determination Integrated Gasification Combined Cycle Affordability and Availability CX(s) Applied: A9 Date: 09/30/2011 Location(s): Houston, Texas Office(s): Fossil Energy, National Energy Technology Laboratory

404

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

6, 2011 6, 2011 CX-006520: Categorical Exclusion Determination High Energy Density Distributed Hydrostatic Direct Drive for Large Wind Turbine and Marine Hydro-Kinetic Device Applications CX(s) Applied: A9 Date: 08/16/2011 Location(s): California Office(s): Energy Efficiency and Renewable Energy, Golden Field Office August 16, 2011 CX-006513: Categorical Exclusion Determination Novel Low Cost, High Reliability Wind Turbine Drivetrain CX(s) Applied: A9 Date: 08/16/2011 Location(s): California Office(s): Energy Efficiency and Renewable Energy, Golden Field Office August 16, 2011 CX-006875: Categorical Exclusion Determination Center for Integrated Nanotechnologies Integration Laboratories: PH3 Operations CX(s) Applied: B3.6 Date: 08/16/2011 Location(s): Albuquerque, New Mexico

405

Categorical Exclusion Determinations: National Energy Technology Laboratory  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

23, 2012 23, 2012 CX-008493: Categorical Exclusion Determination Liquid Carbon Dioxide Slurry for Feeding Low Rank Coal (LRC) Gasifiers CX(s) Applied: A9 Date: 07/23/2012 Location(s): Texas, Oklahoma Offices(s): National Energy Technology Laboratory July 23, 2012 CX-008492: Categorical Exclusion Determination Carbon Dioxide Capture from Integrated Gasification Combined Cycle Gas Streams Using the Ammonium Carbonate-Ammonium Bicarbonate Process CX(s) Applied: A9 Date: 07/23/2012 Location(s): Texas Offices(s): National Energy Technology Laboratory July 23, 2012 CX-008491: Categorical Exclusion Determination Carbon Dioxide Capture from Integrated Gasification Combined Cycle Gas Streams Using the Ammonium Carbonate-Ammonium Bicarbonate Process CX(s) Applied: B3.6 Date: 07/23/2012

406

Categorical Exclusion Determinations: Texas | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

August 5, 2013 August 5, 2013 CX-010811: Categorical Exclusion Determination South Louisiana Enhanced Oil Recovery (EOR)/Sequestration Research and Development (R&D) Project CX(s) Applied: A1, A9, A11 Date: 08/05/2013 Location(s): Texas Offices(s): National Energy Technology Laboratory August 1, 2013 CX-010820: Categorical Exclusion Determination Technology Integration Program - Field Trial - Site Three CX(s) Applied: B3.1, B3.6 Date: 08/01/2013 Location(s): Texas Offices(s): National Energy Technology Laboratory August 1, 2013 CX-010819: Categorical Exclusion Determination Technology Integration Program - Field Trial - Site Three CX(s) Applied: B3.1, B3.6 Date: 08/01/2013 Location(s): Texas Offices(s): National Energy Technology Laboratory August 1, 2013 CX-010818: Categorical Exclusion Determination

407

Colorado | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

September 17, 2010 September 17, 2010 CX-004014: Categorical Exclusion Determination Commercializing the GridAgents Suite: Photovoltaics Integration Plus (PVI+) Software CX(s) Applied: B3.6, B5.1 Date: 09/17/2010 Location(s): Boulder, Colorado Office(s): Energy Efficiency and Renewable Energy September 16, 2010 CX-003699: Categorical Exclusion Determination Multi-Level Energy Storage and Controls for Large-Scale Wind Energy Integration CX(s) Applied: A9, B3.6 Date: 09/16/2010 Location(s): Colorado Office(s): Energy Efficiency and Renewable Energy, Golden Field Office September 16, 2010 CX-004017: Categorical Exclusion Determination High-Temperature Wire Insulations for Downhole Enhanced Geothermal System (EGS) Equipment CX(s) Applied: B3.6, B5.1 Date: 09/16/2010 Location(s): Lafayette, Colorado

408

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

, 2013 , 2013 CX-010820: Categorical Exclusion Determination Technology Integration Program - Field Trial - Site Three CX(s) Applied: B3.1, B3.6 Date: 08/01/2013 Location(s): Texas Offices(s): National Energy Technology Laboratory August 1, 2013 CX-010837: Categorical Exclusion Determination Disassembly, Relocation, and Reassembly of a Metal-framed Quonset Hut CX(s) Applied: B1.22 Date: 08/01/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office August 1, 2013 CX-010836: Categorical Exclusion Determination Subcontractor Roof Repair at 717-12S CX(s) Applied: B1.3 Date: 08/01/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office August 1, 2013 CX-010819: Categorical Exclusion Determination Technology Integration Program - Field Trial - Site Three

409

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

16, 2011 16, 2011 CX-008793: Categorical Exclusion Determination Gore Pass to Muddy Pass: Single Pole and Multiple Cross Arm Replacements Grand County, Wyoming CX(s) Applied: B1.3, B4.6 Date: 09/16/2011 Location(s): Wyoming Offices(s): Western Area Power Administration-Rocky Mountain Region September 16, 2011 CX-006773: Categorical Exclusion Determination Coal-Based Integrated Gasification Fuel Cell Project: Phase II CX(s) Applied: B3.6 Date: 09/16/2011 Location(s): Richland, Washington Office(s): Fossil Energy, National Energy Technology Laboratory September 16, 2011 CX-006772: Categorical Exclusion Determination Coal-Based Integrated Gasification Fuel Cell Project: Phase II CX(s) Applied: B3.6 Date: 09/16/2011 Location(s): Fenton Township, Michigan Office(s): Fossil Energy, National Energy Technology Laboratory

410

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

0, 2013 0, 2013 CX-010422: Categorical Exclusion Determination Mt. Richmond Property Funding CX(s) Applied: B1.25 Date: 06/10/2013 Location(s): Oregon Offices(s): Bonneville Power Administration June 8, 2013 CX-010456: Categorical Exclusion Determination Trident: A Human Factors Decision Aid Integrating Deepwater Drilling Tasks, Incidents, and Literature CX(s) Applied: A9, A11 Date: 06/08/2013 Location(s): California Offices(s): National Energy Technology Laboratory June 8, 2013 CX-010454: Categorical Exclusion Determination Trident: A Human Factors Decision Aid Integrating Deepwater Drilling Tasks, Incidents, and Literature CX(s) Applied: A9, A11 Date: 06/08/2013 Location(s): Texas Offices(s): National Energy Technology Laboratory June 7, 2013 CX-010670: Categorical Exclusion Determination

411

Categorical Exclusion Determinations: Office of Energy Efficiency and  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

December 9, 2010 December 9, 2010 CX-004641: Categorical Exclusion Determination Integrated Whole Building Energy Diagnostics CX(s) Applied: A9, B2.2, B5.1 Date: 12/09/2010 Location(s): East Hartford, Connecticut Office(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory December 9, 2010 CX-004652: Categorical Exclusion Determination Development of High Yield Tropical Feedstocks and Biomass Conversion Technology for Renewable Energy Production and Economic Development CX(s) Applied: A9, B3.8, B5.1 Date: 12/09/2010 Location(s): Hawaii Office(s): Energy Efficiency and Renewable Energy, Golden Field Office December 9, 2010 CX-004650: Categorical Exclusion Determination Integrated Whole Building Energy Diagnostics CX(s) Applied: A9, B2.2, B5.1 Date: 12/09/2010

412

Categorical Exclusion Determinations: A11 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

October 24, 2012 October 24, 2012 CX-009416: Categorical Exclusion Determination Routine Operating and Administrative Activities (ROAA) CX(s) Applied: A8, A9, A11, B1.3, B1.23, B1.31 Date: 10/24/2012 Location(s): Missouri Offices(s): Kansas City Site Office October 18, 2012 CX-009464: Categorical Exclusion Determination Temporal Characterization of Hydrates System Dynamics beneath Seafloor Mounds: Integrating Time-Lapse CX(s) Applied: A9, A11 Date: 10/18/2012 Location(s): Texas Offices(s): National Energy Technology Laboratory October 18, 2012 CX-009462: Categorical Exclusion Determination Temporal Characterization of Hydrates System Dynamics Beneath Seafloor Mounds: Integrating Time-Lapse CX(s) Applied: A9, A11 Date: 10/18/2012 Location(s): Mississippi Offices(s): National Energy Technology Laboratory

413

Applying Large Datasets to Developing a Better Understanding...  

NLE Websites -- All DOE Office Websites (Extended Search)

Technologies Group Electrochemical Technologies Group Grid Integration Group Laser Technologies Group Communications Office Awards Fellowship Eligibility and Selection How...

414

Integral transformation and Darboux transformation  

E-Print Network (OSTI)

We review Darboux-Crum transformation of Heun's differential equation. By rewriting an integral transformation of Heun's differential equation into a form of elliptic functions, we see that the integral representation is a generalization of Darboux-Crum transformation. We also consider conservation of monodromy with respect to the transformations.

Takemura, Kouichi

2009-01-01T23:59:59.000Z

415

HGIP: Haitian government integrated platform  

Science Conference Proceedings (OSTI)

This paper describes the HGIP initiative to equip Haitian government with an integrated system to monitor reconstruction efforts and improve governance. In its current status, this IDB funded project is seeking to integrate various systems and databases ... Keywords: e-governance, inter-organizational information sharing, public administration reform, whole-of-government approach

Carl Sherson Clermont

2011-09-01T23:59:59.000Z

416

CFT, Integrable Models Liouville Gravity  

E-Print Network (OSTI)

CFT, Integrable Models And Liouville Gravity Chernogolovka 2009 Sunday June 28, 2009. Conference as one of components of their L, A pairs. #12;CFT, Integrable Models And Liouville Gravity Chernogolovka Gravity Chernogolovka, 2009 Tuesday June 30, 2009. CONFERENCE HALL 09:30­10:10 Herman Boos (Wuppertal

Fominov, Yakov

417

Integrated Transportation System Design Optimization  

E-Print Network (OSTI)

Integrated Transportation System Design Optimization by Christine Taylor B.S. Cornell University by . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Professor Jaime Peraire Chairman, Department Graduate Committee #12;2 #12;Integrated Transportation System Abstract Traditionally, the design of a transportation system has focused on either the vehicle design

418

INCCA: Integrated Climate and Carbon  

SciTech Connect

The INCCA (Integrated Climate and Carbon) initiative will develop and apply the ability to simulate the fate and climate impact of fossil fuel-derived carbon dioxide (CO{sub 2}) and aerosols on a global scale. Coupled climate and carbon cycle modeling like that proposed for INCCA is required to understand and predict the future environmental impacts of fossil fuel burning. At present, atmospheric CO{sub 2} concentrations are prescribed, not simulated, in large climate models. Credible simulations of the entire climate system, however, need to predict time-evolving atmospheric greenhouse forcing using anthropogenic emissions as the fundamental input. Predicting atmospheric COS concentrations represents a substantial scientific advance because there are large natural sources and sinks of carbon that are likely to change as a result of climate change. Both terrestrial (e.g., vegetation on land) and oceanic components of the carbon cycle are known to be sensitive to climate change. Estimates of the amount of man-made CO{sub 2} that will accumulate in the atmosphere depend on understanding the carbon cycle. For this reason, models that use CO{sub 2} emissions, not prescribed atmospheric concentrations, as fundamental inputs are required to directly address greenhouse-related questions of interest to policymakers. INCCA is uniquely positioned to make rapid progress in this high-priority area of global change modeling and prediction because we can leverage previous and ongoing LLNL developments, and use existing component models that are well-developed and published. The need for a vastly improved carbon dioxide prediction capability is appreciated by the DOE. As the US Accelerated Climate Prediction Initiative (ACPI) progresses, we expect the DOE will emphasize the carbon cycle as the next major department-level earth science focus. INCCA will position LLNL for substantial additional funding as this new focus is realized. In the limited time since our LDRD funding was first received (1 November 2000) we have made good progress in acquisition and testing of component models, applications of the terrestrial biosphere model, enhancements to the ocean carbon cycle model and development of the fossil fuel aerosol model.

Thompson, S L

2001-03-13T23:59:59.000Z

419

Buried Waste Integrated Demonstration Strategy Plan  

SciTech Connect

The Buried Waste Integrated Demonstration (BWID) supports the applied research, development, demonstration, and evaluation of a suite of advanced technologies that form a comprehensive remediation system for the effective and efficient remediation of buried waste. These efforts are identified and coordinated in support of the US Department of Energy (DOE), Environmental Restoration and Waste Management (ERWM) needs and objectives. The present focus of BWID is to support retrieval and ex situ treatment configuration options. Future activities will explore and support containment and stabilization efforts in addition to the retrieval/ex situ treatment options. Long and short term strategies of the BWID are provided. Processes for identifying technological needs, screening candidate technologies for BWID applicability, researching technical issues, field demonstrating technologies, evaluating demonstration results to determine each technology`s threshold of capability, and commercializing successfully demonstrated technologies for implementation for environmental restoration also are presented in this report.

Kostelnik, K.M.

1993-02-01T23:59:59.000Z

420

Buried Waste Integrated Demonstration Strategy Plan  

SciTech Connect

The Buried Waste Integrated Demonstration (BWID) supports the applied research, development, demonstration, and evaluation of a suite of advanced technologies that form a comprehensive remediation system for the effective and efficient remediation of buried waste. These efforts are identified and coordinated in support of the US Department of Energy (DOE), Environmental Restoration and Waste Management (ERWM) needs and objectives. The present focus of BWID is to support retrieval and ex situ treatment configuration options. Future activities will explore and support containment and stabilization efforts in addition to the retrieval/ex situ treatment options. Long and short term strategies of the BWID are provided. Processes for identifying technological needs, screening candidate technologies for BWID applicability, researching technical issues, field demonstrating technologies, evaluating demonstration results to determine each technology's threshold of capability, and commercializing successfully demonstrated technologies for implementation for environmental restoration also are presented in this report.

Kostelnik, K.M.

1993-02-01T23:59:59.000Z

Note: This page contains sample records for the topic "integration cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

NREL: Transmission Grid Integration - Oahu Wind Integration and...  

NLE Websites -- All DOE Office Websites (Extended Search)

Agreement. The agreement includes a commitment to integrate up to 400 megawatts (MW) of offshore wind energy from Molokai or Lanai and transmit it to Oahu via undersea cable...

422

Integrated Estimates of Global Terrestrial Carbon Sequestration  

SciTech Connect

Assessing the contribution of terrestrial carbon sequestration to international climate change mitigation requires integration across scientific and disciplinary boundaries. As part of a scenario analysis for the US Climate Change Technology Program, measurements and geographic data were used to develop terrestrial carbon sequestration estimates for agricultural soil carbon, reforestation and pasture management. These estimates were then applied in the MiniCAM integrated assessment model to evaluate mitigation strategies within policy and technology scenarios aimed at achieving atmospheric CO2 stabilization by 2100. Adoption of terrestrial sequestration practices is based on competition for land and economic markets for carbon. Terrestrial sequestration reach a peak combined rate of 0.5 to 0.7 Gt carbon yr-1 in mid-century with contributions from agricultural soil (0.21 Gt carbon yr-1), reforestation (0.31 Gt carbon yr-1) and pasture (0.15 Gt carbon yr-1). Sequestration rates vary over time period and with different technology and policy scenarios. The combined contribution of terrestrial sequestration over the next century ranges from 31 to 41 GtC. The contribution of terrestrial sequestration to mitigation is highest early in the century, reaching up to 20% of total carbon mitigation. This analysis provides insight into the behavior of terrestrial carbon mitigation options in the presence and absence of climate change mitigation policies.

Thomson, Allison M.; Izaurralde, R Cesar; Smith, Steven J.; Clarke, Leon E.

2008-02-01T23:59:59.000Z

423

Integrated Dynamic Electron Solutions, Inc. | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Integrated Integrated Dynamic Electron Solutions, Inc. America's Next Top Energy Innovator Challenge 333 likes Integrated Dynamic Electron Solutions, Inc. Lawrence Livermore National Laboratory Dynamic Transmission Electron Microscopes DTEM reveal unprecedented details of the mechanisms underlying a host of nanoscale systems that are at the core of our current and future energy economy. A vast and growing number of materials utilized in the energy sector rely on nanostructured materials and their unique dynamic behaviors. DTEM offers researchers the ability to directly interrogate these materials at time and length scales that to-date have either been impossible to access or required the use of multi-billion dollar synchrotrons. DTEM will fundamentally change the approach to basic and applied research in the

424

Integrated Dynamic Electron Solutions, Inc. | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Integrated Integrated Dynamic Electron Solutions, Inc. America's Next Top Energy Innovator Challenge 333 likes Integrated Dynamic Electron Solutions, Inc. Lawrence Livermore National Laboratory Dynamic Transmission Electron Microscopes DTEM reveal unprecedented details of the mechanisms underlying a host of nanoscale systems that are at the core of our current and future energy economy. A vast and growing number of materials utilized in the energy sector rely on nanostructured materials and their unique dynamic behaviors. DTEM offers researchers the ability to directly interrogate these materials at time and length scales that to-date have either been impossible to access or required the use of multi-billion dollar synchrotrons. DTEM will fundamentally change the approach to basic and applied research in the

425

Integrated Dynamic Electron Solutions, Inc. | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Integrated Integrated Dynamic Electron Solutions, Inc. America's Next Top Energy Innovator Challenge 333 likes Integrated Dynamic Electron Solutions, Inc. Lawrence Livermore National Laboratory Dynamic Transmission Electron Microscopes DTEM reveal unprecedented details of the mechanisms underlying a host of nanoscale systems that are at the core of our current and future energy economy. A vast and growing number of materials utilized in the energy sector rely on nanostructured materials and their unique dynamic behaviors. DTEM offers researchers the ability to directly interrogate these materials at time and length scales that to-date have either been impossible to access or required the use of multi-billion dollar synchrotrons. DTEM will fundamentally change the approach to basic and applied research in the

426

Solar energy integrated at Hawaiian military housing | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

energy integrated at Hawaiian military housing energy integrated at Hawaiian military housing Solar energy integrated at Hawaiian military housing December 9, 2009 - 11:27am Addthis What does this project do? Ohana Military Communities have applied for an additional award with the intention of installing photovoltaics on 2,317 military housing units on Oahu, as well as constructing a 3.6-megawatt solar photovoltaic farm to support 2,206 homes on the Big Island. If you ask most travelers, they would say Hawaii really is a very sunny chain of islands. Many Americans have enjoyed a relaxing day on the state's warm beaches or have been awe-inspired by its fascinating volcanoes. But that wealth of sunshine powers more than just the tourism economy - it's creating green jobs and clean, renewable solar energy.

427

AFRD EH&S: Integrated Safety Management Plan  

NLE Websites -- All DOE Office Websites (Extended Search)

Integrated Safety Management Integrated Safety Management The AFRD Integrated Safety Management or ISM Plan is the master document that guides AFRD policies and practices in environment, safety, and health. The guiding principles and core functions (below left) are the key to understanding ISM. Below, right are the topically arranged sections of the AFRD ISM Plan. Depending on your workplace and duties, more than one topic may apply to you. The ISM Plan is updated as of October 2013. Please contact us with any feedback. Guiding Principles Line-management responsibility for safety Clear roles and responsibilities Competence commensurate with responsibilities Balanced Priorities Identification of ES&H standards and requirements Hazard controls (including environmental controls) tailored to work being performed

428

Fully Integrating the Design Process  

SciTech Connect

The basic approach to designing nuclear facilities in the United States does not currently reflect the routine consideration of proliferation resistance and international safeguards. The fully integrated design process is an approach for bringing consideration of international safeguards and proliferation resistance, together with state safeguards and security, fully into the design process from the very beginning, while integrating them sensibly and synergistically with the other project functions. In view of the recently established GNEP principles agreed to by the United States and at least eighteen other countries, this paper explores such an integrated approach, and its potential to help fulfill the new internationally driven design requirements with improved efficiencies and reduced costs.

T.A. Bjornard; R.S. Bean

2008-03-01T23:59:59.000Z

429

NREL: Distributed Grid Integration - Projects  

NLE Websites -- All DOE Office Websites (Extended Search)

Projects Projects Photo of two NREL engineers sitting in front of two computer monitors, discussing a project. NREL engineers work on data capture for micro-grid synchronization waveforms. Photo by Dennis Schroeder, NREL. NREL's distributed energy projects support the integration of new technologies into the electric power grid. This work involves industry, academia, other national laboratories, and various standards organizations. Learn more about our projects: Codes and standards Data collection and visualization Hawaii Clean Energy Initiative Microgrids Power systems modeling Solar Distributed Grid Integration (SunShot) Technology development Vehicle-to-Grid (V2G) Wind2Battery Printable Version Distributed Grid Integration Home Capabilities Projects Codes & Standards

430

Integrated Modeling of Microbial Ecology  

NLE Websites -- All DOE Office Websites (Extended Search)

Modeling of Microbial Ecology in Subsurface Environments Speaker: Dr. Krishna Mahadevan Department of Chemical Engineering and Applied Chemistry University of Toronto Date:...

431

NREL: Transmission Grid Integration - Webinars  

NLE Websites -- All DOE Office Websites (Extended Search)

Webinars Webinars Want updates about future transmission grid integration webinars and publications? Join our mailing list. NREL periodically offers webinars on transmission grid integration topics to provide insight into its research. Explore the resources below to learn more. Upcoming Webinars Please check back. Details on future meetings and workshops will be posted as they are available. Past Webinars Results from The Western Wind and Solar Integration Study Phase 2: An examination of how wind and solar power affect operations, costs, and emissions from fossil-fueled generators Wednesday, September 25, 2013 at 12:00 EDT (10:00 MDT) The Western Wind and Solar Integration Study Phase 2 (WWSIS-2), launched in 2011, examines the potential impacts of up to 33% wind and solar energy

432

ORISE: Integrated Safety Management (ISM)  

NLE Websites -- All DOE Office Websites (Extended Search)

Integrated Safety Management (ISM) Integrated Safety Management (ISM) Oak Ridge Associated Universities (ORAU) is committed to performing work safely as it operates the Oak Ridge Institute for Science and Education (ORISE). ORAU supports the U.S. Department of Energy (DOE) policy of using management systems to integrate safety into work practices at all levels. ORAU defines "safety" as encompassing environment, safety and health, and also includes waste minimization and pollution prevention. All ORAU programs and departments actively pursue continuous improvement, and the addition of Integrated Safety Management (ISM) concepts further strengthens safety as a standard in ORISE's culture. ORAU has accepted the ISM concept by contract under DOE Acquisition Regulations Clause 970.5204-2 and DOE Policy 450.4, Safety Management System Policy.

433

Research Integrity | ornl.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

About ORNL About ORNL Fact Sheet Brochure Diversity Leadership Team Organization History Environmental Policy Corporate Giving Research Integrity Who we are, aren't About ORNL Home | ORNL | About ORNL | Research Integrity SHARE Research Integrity From the Director ORNL Research Code of Conduct Research Misconduct ORNL Policy on Research Integrity From the Director We enjoy an excellent scientific reputation at ORNL, thanks to a solid record of ethical conduct in every aspect of research. It is essential to our future that we maintain and nurture this reputation. We also have a responsibility to mentor the next generation of researchers to ensure that they too understand and adhere to the highest standards of ethical conduct. ORNL's Research Code of Conduct was developed by a committee of

434

NREL's Energy Systems Integration Facility  

NLE Websites -- All DOE Office Websites (Extended Search)

NREL's Energy Systems Integration Facility Speaker(s): Benjamin Kroposki Date: January 14, 2013 - 12:00pm Location: 90-1099 Seminar HostPoint of Contact: Sila Kiliccote The...

435

OMC-INTEGRAL Memory Management  

Science Conference Proceedings (OSTI)

The management of the memory restrictions imposed by the processor (1750A) was one of the major difficulties found in designing the Software (SW) controlling the Optical Monitoring Camera (OMC) payload of the International Gamma Ray Laboratory (INTEGRAL) ...

Jose Manuel Prez Lobato; Eva Martn Lobo

2002-06-01T23:59:59.000Z

436

Data Integration Using Web Services  

Science Conference Proceedings (OSTI)

In this paper we examine the opportunities for data integration in the context of the emerging Web Services systems development paradigm. The paper introduces the programming standards associated with Web Services and provides an example of how Web Services ...

Mark Hansen; Stuart E. Madnick; Michael Siegel

2003-01-01T23:59:59.000Z

437

Integral Effects of Deep Convection  

Science Conference Proceedings (OSTI)

The large-scale, integral effect of convective elements (plumes) constituting an open-ocean chimney is investigated both theoretically and with a plume-resolving numerical model. The authors consider an initially homogeneous patch of ocean of ...

Uwe Send; John Marshall

1995-05-01T23:59:59.000Z

438

Arnold Schwarzenegger INTEGRATED FORECAST AND  

E-Print Network (OSTI)

Arnold Schwarzenegger Governor INTEGRATED FORECAST AND RESERVOIR MANAGEMENT (INFORM) FOR NORTHERN; the former with primary contributions in the areas of climate and hydrologic forecasting and the latter Service (NWS) California Nevada River Forecast Center (CNRFC), the California Department of Water

439

Challenges in Integrating Renewable Technologies  

E-Print Network (OSTI)

PV, solar thermal, and wave. Breakthroughs are also needed in large-scale energy storage technologies reliability and econ- omy. The challenges of integrating high penetrations of renewable energy technologies

440

Spent fuel integrity during transportation  

SciTech Connect

The conditions of recent shipments of light water reactor spent fuel were surveyed. The radioactivity level of cask coolant was examined in an attempt to find the effects of transportation on LWR fuel assemblies. Discussion included potential cladding integrity loss mechanisms, canning requirements, changes of radioactivity levels, and comparison of transportation in wet or dry media. Although integrity loss or degradation has not been identified, radioactivity levels usually increase during transportation, especially for leaking assemblies.

Funk, C.W.; Jacobson, L.D.

1980-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "integration cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Model Transformations And Tool Integration  

E-Print Network (OSTI)

Model transformations are increasingly recognised as being of significant importance to many areas of software development and integration. Recent attention on model transformations has particularly focused on the OMG's Queries / Views / Transformations (QVT) Request for Proposals (RFP). In this paper I motivate the need for dedicated approaches to model transformations, particularly for the data involved in tool integration, outline the challenges involved, and then present a number of technologies and techniques which allow the construction of flexible, powerful and practical model transformations.

Laurence Tratt

2004-01-01T23:59:59.000Z

442

Applied Science and Technology Task Order Fiscal Year 2009 Year...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

09 Year-End Summary Report Applied Science and Technology Task Order Fiscal Year 2009 Year-End Summary Report Applied Science and Technology Task Order Fiscal Year 2009 Year-End...

443

Applied Science and Technology Task Order Fiscal Year 2010 Year...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

0 Year-End Summary Report Applied Science and Technology Task Order Fiscal Year 2010 Year-End Summary Report Applied Science and Technology Task Order Fiscal Year 2010 Year-End...

444

Applied Science and Technology Task Order Fiscal Year 2011 Year...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1 Year-End Summary Report Applied Science and Technology Task Order Fiscal Year 2011 Year-End Summary Report Applied Science and Technology Task Order Fiscal Year 2011 Year-End...

445

Applied Science and Technology Task Order Fiscal Year 2008 Year...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

8 Year-End Summary Report Applied Science and Technology Task Order Fiscal Year 2008 Year-End Summary Report Applied Science and Technology Task Order Fiscal Year 2008 Year-End...

446

Proceedings of the 2011 ACM Symposium on Applied Computing  

Science Conference Proceedings (OSTI)

Welcome to the 26th International Symposium on Applied Computing (SAC 2011). For the past 25 years, SAC has become a major international venue for computing researchers and applied practitioners to convene and share ideas on recent developments in a ...

William Chu; W. Eric Wong; Mathew J. Palakal; Chih-Cheng Hung

2011-03-01T23:59:59.000Z

447

Roadmap: Applied Engineering Manufacturing Systems Bachelor of Science  

E-Print Network (OSTI)

Roadmap: Applied Engineering ­ Manufacturing Systems ­ Bachelor of Science [AT 15000 Introduction to Human Communication 3 Fulfills Kent Core Additional Kent Core Requirement 3 See #12;Roadmap: Applied Engineering ­ Manufacturing Systems ­ Bachelor of Science [AT

Sheridan, Scott

448

Open Solicitations and How to Apply: the Loan Guarantee Program...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Open Solicitations and How to Apply: the Loan Guarantee Program Invites You to a Free Webinar Open Solicitations and How to Apply: the Loan Guarantee Program Invites You to a Free...

449

Proceedings of the 2010 ACM Symposium on Applied Computing  

Science Conference Proceedings (OSTI)

Welcome to the 25th International Symposium on Applied Computing (SAC 2010). For the past 24 years, SAC has become a major international venue for computing researchers and applied practitioners to convene and share ideas on recent developments in a ...

Sung Y. Shin; Sascha Ossowski; Michael Schumacher; Mathew J. Palakal; Chih-Cheng Hung

2010-03-01T23:59:59.000Z

450

DOE - Office of Legacy Management -- Case School of Applied Science...  

Office of Legacy Management (LM)

Case School of Applied Science Ohio State University - OH 0-01 FUSRAP Considered Sites Site: Case School of Applied Science, Ohio State University (OH.0-01 ) Eliminated from...

451

Applying Innovation System Concept in Agricultural Research for...  

Open Energy Info (EERE)

and impact orientation need to be integrated into the agricultural research process. The R&D system should think in terms of contributing to innovation. The Improving Productivity...

452

PLZT NANO PRE URSORS FOR HIGH ENERGY DENSITY APPLI ATIONS  

APPLI ATIONS & INDUSTRIES ENEFITS Pulsed Power Oil Exploration Capacitors Refer to SD # 12119 Thermistors Transducers Military & Defense Automotive

453

Dixson and Fu Receive NIST Applied Research Award  

Science Conference Proceedings (OSTI)

Dixson and Fu Receive NIST Applied Research Award. For Immediate Release: December 1, 1999. *. Bookmark and Share. ...

2013-07-19T23:59:59.000Z

454

Materials Research Applied to National Needs (MARANN) in Honor ...  

Science Conference Proceedings (OSTI)

Jul 31, 2012 ... About this Symposium. Meeting, 2013 TMS Annual Meeting & Exhibition. Symposium, Materials Research Applied to National Needs...

455

Foundations of uncertain-data integration  

Science Conference Proceedings (OSTI)

There has been considerable past work studying data integration and uncertain data in isolation. We develop the foundations for local-as-view (LAV) data integration when the sources being integrated are uncertain. We motivate two distinct settings ...

Parag Agrawal; Anish Das Sarma; Jeffrey Ullman; Jennifer Widom

2010-09-01T23:59:59.000Z

456

Clean Coal Power Initiative Round 1 Demonstration Projects Applying Advanced Technologies to Lower Emissions  

NLE Websites -- All DOE Office Websites (Extended Search)

7 JUNE 2012 7 JUNE 2012 Clean Coal Power Initiative Round 1 Demonstration Projects Applying Advanced Technologies to Lower Emissions and Improve Efficiency 2 Cover Photos: * Top left: Great River Energy's Coal Creek Station * Top right: We Energy's Presque Isle Power Plant * Bottom: Dynegy's Baldwin Energy Complex A report on three projects conducted under separate cooperative agreements between the U.S. Department of Energy and: * Great River Energy * NeuCo. , Inc. * WeEnergies 3 Executive Summary 4 Clean Coal Technology Demonstration Program 5 CCPI Program 6 Demonstration of Integrated Optimization Software at

457

ISHED1: Applying the LEM Methodology to Heat Exchanger Design  

E-Print Network (OSTI)

ISHED1: Applying the LEM Methodology to Heat Exchanger Design Kenneth A. Kaufman Ryszard S. Michalski MLI 00-2 #12;2 ISHED1: APPLYING THE LEM METHODOLOGY TO HEAT EXCHANGER DESIGN Kenneth A. Kaufman-2 January 2000 #12;ISHED1: APPLYING THE LEM METHODOLOGY TO HEAT EXCHANGER DESIGN Abstract Evolutionary

Michalski, Ryszard S.

458

INTEGRATED HYDROGEN STORAGE SYSTEM MODEL  

DOE Green Energy (OSTI)

Hydrogen storage is recognized as a key technical hurdle that must be overcome for the realization of hydrogen powered vehicles. Metal hydrides and their doped variants have shown great promise as a storage material and significant advances have been made with this technology. In any practical storage system the rate of H2 uptake will be governed by all processes that affect the rate of mass transport through the bed and into the particles. These coupled processes include heat and mass transfer as well as chemical kinetics and equilibrium. However, with few exceptions, studies of metal hydrides have focused primarily on fundamental properties associated with hydrogen storage capacity and kinetics. A full understanding of the complex interplay of physical processes that occur during the charging and discharging of a practical storage system requires models that integrate the salient phenomena. For example, in the case of sodium alanate, the size of NaAlH4 crystals is on the order of 300nm and the size of polycrystalline particles may be approximately 10 times larger ({approx}3,000nm). For the bed volume to be as small as possible, it is necessary to densely pack the hydride particles. Even so, in packed beds composed of NaAlH{sub 4} particles alone, it has been observed that the void fraction is still approximately 50-60%. Because of the large void fraction and particle to particle thermal contact resistance, the thermal conductivity of the hydride is very low, on the order of 0.2 W/m-{sup o}C, Gross, Majzoub, Thomas and Sandrock [2002]. The chemical reaction for hydrogen loading is exothermic. Based on the data in Gross [2003], on the order of 10{sup 8}J of heat of is released for the uptake of 5 kg of H{sub 2}2 and complete conversion of NaH to NaAlH{sub 4}. Since the hydride reaction transitions from hydrogen loading to discharge at elevated temperatures, it is essential to control the temperature of the bed. However, the low thermal conductivity of the hydride makes it difficult to remove the heat of reaction, especially in the relatively short target refueling times, see Attachment 3. This document describes a detailed numerical model for general metal hydride beds that couples reaction kinetics with heat and mass transfer, for both hydriding and dehydriding of the bed. The detailed model is part of a comprehensive methodology for the design, evaluation and modification of hydrogen storage systems. In Hardy [2007], scoping models for reaction kinetics, bed geometry and heat removal parameters are discussed. The scoping models are used to perform a quick assessment of storage systems and identify those which have the potential to meet DOE performance targets. The operational characteristics of successful candidate systems are then evaluated with the more detailed models discussed in this document. The detailed analysis for hydrogen storage systems is modeled in either 2 or 3-dimensions, via the general purpose finite element solver COMSOL Multiphysics{reg_sign}. The two-dimensional model serves to provide rapid evaluation of bed configurations and physical processes, while the three-dimensional model, which requires a much longer run time, is used to investigate detailed effects that do not readily lend themselves to two-dimensional representations. The model is general and can be adapted to any geometry or storage media. In this document, the model is applied to a modified cylindrical shell and tube geometry with radial fins perpendicular to the axis, see Figures 4.1-1 and 4.1-2. Sodium alanate, NaAlH{sub 4}, is used as the hydrogen storage medium. The model can be run on any DOS, LINUX or Unix based system.

Hardy, B

2007-11-16T23:59:59.000Z

459

Building Technologies Office: Integrated Predictive Demand Response  

NLE Websites -- All DOE Office Websites (Extended Search)

Integrated Predictive Integrated Predictive Demand Response Controller Research Project to someone by E-mail Share Building Technologies Office: Integrated Predictive Demand Response Controller Research Project on Facebook Tweet about Building Technologies Office: Integrated Predictive Demand Response Controller Research Project on Twitter Bookmark Building Technologies Office: Integrated Predictive Demand Response Controller Research Project on Google Bookmark Building Technologies Office: Integrated Predictive Demand Response Controller Research Project on Delicious Rank Building Technologies Office: Integrated Predictive Demand Response Controller Research Project on Digg Find More places to share Building Technologies Office: Integrated Predictive Demand Response Controller Research Project on AddThis.com...

460

Building Technologies Office: Integrated Building Management System  

NLE Websites -- All DOE Office Websites (Extended Search)

Integrated Building Integrated Building Management System Research Project to someone by E-mail Share Building Technologies Office: Integrated Building Management System Research Project on Facebook Tweet about Building Technologies Office: Integrated Building Management System Research Project on Twitter Bookmark Building Technologies Office: Integrated Building Management System Research Project on Google Bookmark Building Technologies Office: Integrated Building Management System Research Project on Delicious Rank Building Technologies Office: Integrated Building Management System Research Project on Digg Find More places to share Building Technologies Office: Integrated Building Management System Research Project on AddThis.com... About Take Action to Save Energy Partner with DOE

Note: This page contains sample records for the topic "integration cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Integrated Safety Management- Building Mission Success  

NLE Websites -- All DOE Office Websites (Extended Search)

ISM Integrated Safety Management- Building Mission Success Approximately 500 federal and contractor employees will arrive in Idaho Falls to participate in the 2008 Integrated...

462

Energy Systems Integration | OpenEI Community  

Open Energy Info (EERE)

Systems Integration Home > Energy Systems Integration > Posts by term Content Group Activity By term Q & A Feeds developer (1) ESI (1) Literature Review (5) Maintenance (1)...

463

Major Risk Factors Integrated Facility Disposition Project -...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

- Oak Ridge Summary - Major Risk Factors Integrated Facility Disposition Project (IFDP) Oak Ridge, TN More Documents & Publications Major Risk Factors to the Integrated...

464

NREL: Process Development and Integration Laboratory - Video...  

NLE Websites -- All DOE Office Websites (Extended Search)

Video on How Process Development and Integration Works In this video, we provide a narrated animation that explains the process development and integration approach being used by...

465

NREL: Process Development and Integration Laboratory - Capabilities  

NLE Websites -- All DOE Office Websites (Extended Search)

Capabilities The process development and integration approach used within the Process Development and Integration Laboratory (PDIL) provides numerous capabilities for scientific...

466

NREL: Process Development and Integration Laboratory - Working...  

NLE Websites -- All DOE Office Websites (Extended Search)

Working with Us The Process Development and Integration Laboratory (PDIL), which accommodates the process development and integration approach, facilitates collaborative projects...

467

NREL: Process Development and Integration Laboratory - About...  

NLE Websites -- All DOE Office Websites (Extended Search)

About the Process Development and Integration Laboratory The Process Development and Integration Laboratory (PDIL) is located within the Science and Technology Facility at the...

468

Distributed Energy Systems Integration Group (Fact Sheet)  

Science Conference Proceedings (OSTI)

Factsheet developed to describe the activites of the Distributed Energy Systems Integration Group within NREL's Electricity, Resources, and Buildings Systems Integration center.

Not Available

2009-10-01T23:59:59.000Z

469

Integrating transportation conservation with regional conservation planning  

E-Print Network (OSTI)

and Wildlife Biologist/Transportation Liaison, U.S. Fish andChapter Integrating Transportation and Resource Conservationon the integration of transportation conservation with the

DiGregoria, John; Luciani, Emilie; Wynn, Susan

2005-01-01T23:59:59.000Z

470

NREL: Electricity Integration Research - Electricity, Resources...  

NLE Websites -- All DOE Office Websites (Extended Search)

Electricity, Resources, and Building Systems Integration Center NREL's Electricity, Resources, and Building Systems Integration Center brings together diverse groups of experts...

471

Light Water Reactor Sustainability Program: Integrated Program...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Light Water Reactor Sustainability Program: Integrated Program Plan Light Water Reactor Sustainability Program: Integrated Program Plan Nuclear power has safely, reliably, and...

472

Power Integrations Inc | Open Energy Information  

Open Energy Info (EERE)

Name Power Integrations Inc Place San Jose, California Zip 95138 Product Supplier of high-voltage analog integrated circuits used in power conversion. References Power...

473

India's Integrated Energy Policy | Open Energy Information  

Open Energy Info (EERE)

India's Integrated Energy Policy Jump to: navigation, search Name India's Integrated Energy Policy AgencyCompany Organization Government of India Sector Energy Focus Area...

474

Audit of Departmental Integrated Standardized Core Accounting...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Audit of Departmental Integrated Standardized Core Accounting System (DISCAS) Operations at Selected Field Sites, AP-FS-97-02 Audit of Departmental Integrated Standardized Core...

475

IMPLEMENTATION OF INTEGRATED BUSINESS INFORMATION SYSTEMS WITHIN...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

IMPLEMENTATION OF INTEGRATED BUSINESS INFORMATION SYSTEMS WITHIN THE DEPARTMENT OF ENERGY, DOEIG-0466 IMPLEMENTATION OF INTEGRATED BUSINESS INFORMATION SYSTEMS WITHIN THE...

476

NIST Modeled integrated scattering tool (MIST)  

Science Conference Proceedings (OSTI)

... been developed to provide users with a general application to model an integrated scattering system. The program performs an integration of the ...

2012-08-07T23:59:59.000Z

477

Eon Masdar Integrated Carbon | Open Energy Information  

Open Energy Info (EERE)

Sign Up Search Page Edit with form History Facebook icon Twitter icon Eon Masdar Integrated Carbon Jump to: navigation, search Name Eon Masdar Integrated Carbon Place Germany...

478

Integrated Security System | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Integrated Security System Integrated Security System A security platform providing multi-layer intrusion detection and security management for a networked energy control systems...

479

EIS-0431: Hydrogen Energy California's Integrated Gasification...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

31: Hydrogen Energy California's Integrated Gasification Combined Cycle and Carbon Capture and Sequestration Project, California EIS-0431: Hydrogen Energy California's Integrated...

480

BTRIC | Building Tech Research Integration Center | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

& Integration Center SHARE The Buildings Technology Research & Integration Center (BTRIC) User Facility at Oak Ridge National Laboratory is the premier U.S. research facility...

Note: This page contains sample records for the topic "integration cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

The Integrated Environmental Control Model (IECM)  

NLE Websites -- All DOE Office Websites (Extended Search)

Innovations for Existing Plants The Integrated Environmental Control Model (IECM) The Integrated Environmental Control Model (IECM) was developed for the National Energy Technology...

482

NREL: Distributed Grid Integration - Research Staff  

NLE Websites -- All DOE Office Websites (Extended Search)

interests include grid integration of renewables systems (wind and PV), energy storage system integration, distributed energy resources, distribution automation, power systems,...

483

Applying Innovation System Concept in Agricultural Research for  

Open Energy Info (EERE)

Applying Innovation System Concept in Agricultural Research for Applying Innovation System Concept in Agricultural Research for Development: A learning module Jump to: navigation, search Tool Summary Name: Applying Innovation System Concept in Agricultural Research for Development: A learning module Agency/Company /Organization: International Livestock Research Institute Sector: Land Focus Area: Agriculture Topics: Policies/deployment programs Resource Type: Training materials Website: mahider.ilri.org/bitstream/10568/167/1/Innovation_System_Agric_LM.pdf Applying Innovation System Concept in Agricultural Research for Development: A learning module Screenshot References: Applying Innovation System Concept in Agricultural Research for Development: A learning module[1] Preface "Sustained agricultural growth requires, among others, increased

484

Separations and safeguards model integration.  

Science Conference Proceedings (OSTI)

Research and development of advanced reprocessing plant designs can greatly benefit from the development of a reprocessing plant model capable of transient solvent extraction chemistry. This type of model can be used to optimize the operations of a plant as well as the designs for safeguards, security, and safety. Previous work has integrated a transient solvent extraction simulation module, based on the Solvent Extraction Process Having Interaction Solutes (SEPHIS) code developed at Oak Ridge National Laboratory, with the Separations and Safeguards Performance Model (SSPM) developed at Sandia National Laboratory, as a first step toward creating a more versatile design and evaluation tool. The goal of this work was to strengthen the integration by linking more variables between the two codes. The results from this integrated model show expected operational performance through plant transients. Additionally, ORIGEN source term files were integrated into the SSPM to provide concentrations, radioactivity, neutron emission rate, and thermal power data for various spent fuels. This data was used to generate measurement blocks that can determine the radioactivity, neutron emission rate, or thermal power of any stream or vessel in the plant model. This work examined how the code could be expanded to integrate other separation steps and benchmark the results to other data. Recommendations for future work will be presented.

Cipiti, Benjamin B.; Zinaman, Owen

2010-09-01T23:59:59.000Z

485

MHD Integrated Topping Cycle Project  

DOE Green Energy (OSTI)

The Magnetohydrodynamics (MHD) Integrated Topping Cycle (ITC) Project represents the culmination of the proof-of-concept (POC) development stage in the US Department of Energy (DOE) program to advance MHD technology to early commercial development stage utility power applications. The project is a joint effort, combining the skills of three topping cycle component developers: TRW, Avco/TDS, and Westinghouse. TRW, the prime contractor and system integrator, is responsible for the 50 thermal megawatt (50 MW{sub t}) slagging coal combustion subsystem. Avco/TDS is responsible for the MHD channel subsystem (nozzle, channel, diffuser, and power conditioning circuits), and Westinghouse is responsible for the current consolidation subsystem. The ITC Project will advance the state-of-the-art in MHD power systems with the design, construction, and integrated testing of 50 MW{sub t} power train components which are prototypical of the equipment that will be used in an early commercial scale MHD utility retrofit. Long duration testing of the integrated power train at the Component Development and Integration Facility (CDIF) in Butte, Montana will be performed, so that by the early 1990's, an engineering data base on the reliability, availability, maintainability and performance of the system will be available to allow scaleup of the prototypical designs to the next development level. This Sixteenth Quarterly Technical Progress Report covers the period May 1, 1991 to July 31, 1991.

Not Available

1992-03-01T23:59:59.000Z

486

Vehicle Technologies Office: Lightweight Materials Long-Term Applied  

NLE Websites -- All DOE Office Websites (Extended Search)

Long-Term Applied Research: Magnesium and Carbon Fiber to someone by E-mail Long-Term Applied Research: Magnesium and Carbon Fiber to someone by E-mail Share Vehicle Technologies Office: Lightweight Materials Long-Term Applied Research: Magnesium and Carbon Fiber on Facebook Tweet about Vehicle Technologies Office: Lightweight Materials Long-Term Applied Research: Magnesium and Carbon Fiber on Twitter Bookmark Vehicle Technologies Office: Lightweight Materials Long-Term Applied Research: Magnesium and Carbon Fiber on Google Bookmark Vehicle Technologies Office: Lightweight Materials Long-Term Applied Research: Magnesium and Carbon Fiber on Delicious Rank Vehicle Technologies Office: Lightweight Materials Long-Term Applied Research: Magnesium and Carbon Fiber on Digg Find More places to share Vehicle Technologies Office: Lightweight

487

CX-008995: Categorical Exclusion Determination  

Energy.gov (U.S. Department of Energy (DOE))

Development of Integrated Die Casting Process For Large Thin-Wall Magnesium Applications CX(s) Applied: A9, B3.6 Date: 08/20/2012 Location(s): Michigan, Michigan, Ohio, Michigan Offices(s): Golden Field Office

488

CX-009142: Categorical Exclusion Determination  

Energy.gov (U.S. Department of Energy (DOE))

Development and Productization of High-Efficiency, Los-Cost Building-Integrated Photovoltaic Shingles Using Monocrystalline Silicon Thin Film Solar Cells CX(s) Applied: A9, B3.6 Date: 09/24/2012 Location(s): California Offices(s): Golden Field Office

489

CX-008295: Categorical Exclusion Determination  

Energy.gov (U.S. Department of Energy (DOE))

Waste Heat Integration with Solvent Process for More Efficient Carbon Dioxide Removal from Coal-Fired Flue Gas CX(s) Applied: A9, A11, B3.6 Date: 04/27/2012 Location(s): Texas Offices(s): National Energy Technology Laboratory

490

CX-008293: Categorical Exclusion Determination  

Energy.gov (U.S. Department of Energy (DOE))

Waste Heat Integration with Solvent Process for More Efficient Carbon Dioxide Removal from Coal-Fired Flue Gas CX(s) Applied: B3.6 Date: 04/25/2012 Location(s): Alabama Offices(s): National Energy Technology Laboratory

491

CX-008294: Categorical Exclusion Determination  

Energy.gov (U.S. Department of Energy (DOE))

Waste Heat Integration with Solvent Process for More Efficient Carbon Dioxide Removal from Coal-Fired Flue Gas CX(s) Applied: A11, B3.6 Date: 04/27/2012 Location(s): Alabama Offices(s): National Energy Technology Laboratory

492

SunShot Initiative: Systems Integration  

NLE Websites -- All DOE Office Websites (Extended Search)

Systems Integration to someone by Systems Integration to someone by E-mail Share SunShot Initiative: Systems Integration on Facebook Tweet about SunShot Initiative: Systems Integration on Twitter Bookmark SunShot Initiative: Systems Integration on Google Bookmark SunShot Initiative: Systems Integration on Delicious Rank SunShot Initiative: Systems Integration on Digg Find More places to share SunShot Initiative: Systems Integration on AddThis.com... Concentrating Solar Power Photovoltaics Systems Integration Research, Development, & Demonstration Competitive Awards Balance of Systems Systems Integration High Penetration Solar Portal The High Penetration Solar Portal has timely information related to high penetration solar scenarios and integrating solar into the grid. The site allows utilities, grant awardees, regulators, researchers, and other solar

493

Process Development and Integration Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

* 1617 Cole Boulevard, Golden, Colorado 80401-3305 * 303-275-3000 * www.nrel.gov * 1617 Cole Boulevard, Golden, Colorado 80401-3305 * 303-275-3000 * www.nrel.gov NREL is a national laboratory of the U. S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC. NREL/FS-5200-48351 * June 2011 Process Development and Integration Laboratory Scope. The Process Development and Integration Laboratory (PDIL) within the National Renewable Energy Laboratory (NREL) is operated by the National Center for Photovoltaics (NCPV). The PDIL is a unique collaborative facility where industry and universities can work closely with NREL scientists on integrated equipment to answer pressing questions related to photovoltaics (PV) development. We work with a wide range of PV materials-from crystalline silicon to thin films (amorphous, nano- and

494

NREL: Electricity Integration Research - Webmaster  

NLE Websites -- All DOE Office Websites (Extended Search)

Webmaster Webmaster Please enter your name and email address in the boxes provided, then type your message below. When you are finished, click "Send Message." NOTE: If you enter your e-mail address incorrectly, we will be unable to reply. Your name: Your email address: Your message: Send Message Printable Version Electricity Integration Research Home Distributed Grid Integration Transmission Grid Integration Facilities Working with Us Did you find what you needed? Yes 1 No 0 Thank you for your feedback. Would you like to take a moment to tell us how we can improve this page? Submit We value your feedback. Thanks! We've received your feedback. Something went wrong. Please try again later. NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.

495

Integrated Building Management System (IBMS)  

SciTech Connect

This project provides a combination of software and services that more easily and cost-effectively help to achieve optimized building performance and energy efficiency. Featuring an open-platform, cloud- hosted application suite and an intuitive user experience, this solution simplifies a traditionally very complex process by collecting data from disparate building systems and creating a single, integrated view of building and system performance. The Fault Detection and Diagnostics algorithms developed within the IBMS have been designed and tested as an integrated component of the control algorithms running the equipment being monitored. The algorithms identify the normal control behaviors of the equipment without interfering with the equipment control sequences. The algorithms also work without interfering with any cooperative control sequences operating between different pieces of equipment or building systems. In this manner the FDD algorithms create an integrated building management system.

Anita Lewis

2012-07-01T23:59:59.000Z

496

Categorical Exclusion Determinations: West Virginia | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

West Virginia West Virginia Categorical Exclusion Determinations: West Virginia Location Categorical Exclusion Determinations issued for actions in West Virginia. DOCUMENTS AVAILABLE FOR DOWNLOAD September 25, 2013 CX-010926: Categorical Exclusion Determination Development of Integrated Biomimetic Framework with Intelligent Monitoring, Cognition, and Decision... CX(s) Applied: A9 Date: 09/25/2013 Location(s): West Virginia Offices(s): National Energy Technology Laboratory September 17, 2013 CX-010953: Categorical Exclusion Determination Building 28 Demolition CX(s) Applied: B1.23 Date: 09/17/2013 Location(s): West Virginia Offices(s): National Energy Technology Laboratory September 17, 2013 CX-010950: Categorical Exclusion Determination Building 30 (B-30) Demolition CX(s) Applied: B1.16, B1.23

497

Categorical Exclusion Determinations: Office of Energy Efficiency and  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3, 2010 3, 2010 CX-002814: Categorical Exclusion Determination City of Arcola 40 Kilowatt Wind Turbine Project CX(s) Applied: B5.1 Date: 06/23/2010 Location(s): Arcola, Illinois Office(s): Energy Efficiency and Renewable Energy, Golden Field Office June 23, 2010 CX-002798: Categorical Exclusion Determination Central Corridor Energy District Integration Study CX(s) Applied: A9 Date: 06/23/2010 Location(s): St. Paul, Minnesota Office(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory June 23, 2010 CX-002797: Categorical Exclusion Determination Water to Water Heat Pump Chiller CX(s) Applied: B2.2, B2.3, B1.5, B5.1 Date: 06/23/2010 Location(s): Phoenix, Arizona Office(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory

498

FE Categorical Exclusions | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

24, 2010 24, 2010 CX-002396: Categorical Exclusion Determination Montana Integrated Carbon to Liquids Technology (ICTL) Demonstration Program CX(s) Applied: B3.6 Date: 05/24/2010 Location(s): Grand Forks, North Dakota Office(s): Fossil Energy, National Energy Technology Laboratory May 24, 2010 CX-002393: Categorical Exclusion Determination Dewatering of Fine Coal Pellets CX(s) Applied: B3.6 Date: 05/24/2010 Location(s): Lexington, Kentucky Office(s): Fossil Energy, National Energy Technology Laboratory May 24, 2010 CX-002392: Categorical Exclusion Determination Separation of Mineral Matter from Coal in a Riser System CX(s) Applied: B3.6 Date: 05/24/2010 Location(s): Morgantown, West Virginia Office(s): Fossil Energy, National Energy Technology Laboratory May 24, 2010 CX-002391: Categorical Exclusion Determination

499

Colorado | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

16, 2010 16, 2010 CX-001709: Categorical Exclusion Determination Application Titled: Integration of Noise and Coda Correlation Data CX(s) Applied: A9 Date: 04/16/2010 Location(s): Colorado Office(s): Energy Efficiency and Renewable Energy, Golden Field Office April 15, 2010 CX-001652: Categorical Exclusion Determination Structure Replacement Hayden-Gore Pass 138 Kilovolt Transmission Line (Structure 25/5) Spring 2010 CX(s) Applied: B4.6 Date: 04/15/2010 Location(s): Colorado Office(s): Western Area Power Administration-Rocky Mountain Region April 15, 2010 CX-001631: Categorical Exclusion Determination Install Wells and Boreholes at the Old Rifle Colorado Processing Site CX(s) Applied: B3.1 Date: 04/15/2010 Location(s): Old Rifle, Colorado Office(s): Legacy Management April 12, 2010

500

Categorical Exclusion Determinations: A9 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

9, 2010 9, 2010 CX-003054: Categorical Exclusion Determination Energy Efficient/Comfortable Buildings through Multivariate Integrated Controls (ECoMIC) CX(s) Applied: A9, B2.2, B5.1 Date: 07/19/2010 Location(s): Westchester, New York Office(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory July 19, 2010 CX-003050: Categorical Exclusion Determination Irvine Smart Grid Demonstration Project CX(s) Applied: A9, A11, B3.6, B4.6, B5.1 Date: 07/19/2010 Location(s): Irvine, California Office(s): Electricity Delivery and Energy Reliability, National Energy Technology Laboratory July 19, 2010 CX-003048: Categorical Exclusion Determination Training Program Development for Commercial Building Equipment Technicians CX(s) Applied: A1, A9, A11 Date: 07/19/2010