Powered by Deep Web Technologies
Note: This page contains sample records for the topic "integration activities related" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Relational measures and integration  

Science Conference Proceedings (OSTI)

Work in fuzzy modeling has recently made its way from the interval $[0,1]\\subseteq {\\mathord{\\rm I \\! R}}$ to the ordinal or even to the qualitative level. We proceed further and introduce relational measures and relational integration. First ideas of ... Keywords: Choquet integral, evidence and belief, measure, necessity, plausibility, possibility measures, relation algebra, relational, sugeno integral

Gunther Schmidt

2006-08-01T23:59:59.000Z

2

Relational Antecedents of Information Flow Integration for Supply Chain Coordination  

Science Conference Proceedings (OSTI)

A new model of competition, where competition is among supply chain networks rather than individual firms, is transforming traditional market-based buyer-supplier relations to one of competition among cooperative sets. In order to integrate and realize ... Keywords: Information Flow Integration, Information Sharing, Relational Orientation, Supply Chain Management, Supply Chain Relationships

Ravi Patnayakuni; Arun Rai; Nainika Seth

2006-06-01T23:59:59.000Z

3

Approaches to Relating and Integrating Semantic Data from Heterogeneous Sources  

Science Conference Proceedings (OSTI)

Integrating and relating heterogeneous data using inference is one of the cornerstones of semantic technologies and there are a variety of ways in which this may be achieved. Cross source relationships can be automatically translated or inferred using ... Keywords: inference, semantic integration, OWL/RDF, rules, query

John Keeney; Aidan Boran; Ivan Bedini; Christopher J. Matheus; Peter F. Patel-Schneider

2011-08-01T23:59:59.000Z

4

Grid-Related Materials Development Across the NETL-RUA: A Proposed Integrated Materials Development Initiative  

NLE Websites -- All DOE Office Websites (Extended Search)

Related Materials Development Across the NETL-RUA: Related Materials Development Across the NETL-RUA: A Proposed Integrated Materials Development Initiative Office of Research & Development Activities Relevant Centers and Expertise Within the Regional University Alliance Needs for Advanced Materials in Grid Applications Forward Looking Vision: Integrated Development Initiative Active / Passive Components in Power Electronics Sensors for Power Flow Control and Condition Monitoring Grid-Scale Energy Storage Enduring Expertise in Electrochemical Materials Emerging Expertise in Magnetic and Optical Materials EPRI Report 1016921 EPRI Report 1020619 Energy Storage Energy Storage Grid of The Future 1) High Renewable Penetration 2) Active Power Flow Control 3) High Electric Vehicle Deployment 4)

5

Integrated electric alternators/active filters  

E-Print Network (OSTI)

In response to energy crisis and power quality concerns, three different methodologies to integrate the concept of active filtering into the alternators are proposed. Wind energy, due to its free availability and its clean and renewable character, ranks as the most promising renewable energy resource that could play a key role in solving the worldwide energy crisis. An Integrated Doubly-fed Electric Alternator/Active filter (IDEA) for wind energy conversion systems is proposed. The proposed IDEA is capable of simultaneous capturing maximum power of wind energy and improving power quality, which are achieved by canceling the most significant and troublesome harmonics of the utility grid and power factor correction and reactive power compensation in the grid. The back-to-back current regulated power converters are employed to excite the rotor of IDEA. The control strategy of rotor-side power converter is based on position sensoreless field oriented control method with higher power density. Analysis and experimental results are presented to demonstrate the effectiveness of the proposed IDEA. In next step, an integrated synchronous machine/active filter is discussed. The proposed technology is essentially a rotating synchronous machine with suitable modification to its field excitation circuit to allow dc and ac excitations. It is shown that by controlling the ac excitation, the 5th and 7th harmonics currents of the utility are compensated. The proposed method is cost effective because it can be applied to existing standby generators in commercial and industrial plants with minimal modification to the excitation circuits. To boost the gain of harmonic compensatory, an advanced electric machine is proposed. An Asymmetric Airgap Concentrated Winding Synchronous Machine (AACWSM) with ac and dc excitation was designed and employed. It is shown that the AACWSM with its unique design, in addition to power generation capability, could be used to compensate the most dominant current harmonics of the utility. The proposed AACWSM can compensate for the 5th and 7th harmonics currents in the grid by controlling the ac field excitation. In addition, the 11th and 13th harmonics currents are also significantly reduced. This system can be used at medium and low voltages for generation or motoring mode of operation.

Abolhassani, Mehdi Towliat

2005-05-01T23:59:59.000Z

6

Integrating Pollution Prevention with NEPA Planning Activities  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DATE: REPLY TO ATTN OF: SUBJECT: TO: October 15, 1992 EH-25 Integrating Pollution Prevention with NEPA Planning Activities NEPA Compliance Officers The purpose of this memorandum is to advise you of the direction that the Environmental Protection Agency (EPA) and Council on Environmental Quality (CEQ) appear to be taking regarding pollution prevention and NEPA, and to encourage you to use the NEPA process to incorporate pollution prevention principles into the DOE planning and decisionmaking process. The Pollution Prevention Act of 1990 affirms Congressional commitment to a new approach in improving environmental quality. The Act establishes as national policy the following hierarchy of actions for environmental protection: 1. prevent or reduce pollution at the source wherever

7

Transformations of Heun's equation and its integral relations  

E-Print Network (OSTI)

We find transformations of variables which preserve the form of the equation for the kernels of integral relations among solutions of the Heun equation. These transformations lead to new kernels for the Heun equation, given by single hypergeometric functions (Lambe-Ward-type kernels) and by products of two hypergeometric functions (Erd\\'elyi-type). Such kernels, by a limiting process, also afford new kernels for the confluent Heun equation.

L閍 Jaccoud El-Jaick; Bartolomeu D. B. Figueiredo

2010-02-24T23:59:59.000Z

8

Free and constrained symplectic integrators for numerical general relativity  

E-Print Network (OSTI)

We consider symplectic time integrators in numerical General Relativity and discuss both free and constrained evolution schemes. For free evolution of ADM-like equations we propose the use of the Stoermer-Verlet method, a standard symplectic integrator which here is explicit in the computationally expensive curvature terms. For the constrained evolution we give a formulation of the evolution equations that enforces the momentum constraints in a holonomically constrained Hamiltonian system and turns the Hamilton constraint function from a weak to a strong invariant of the system. This formulation permits the use of the constraint-preserving symplectic RATTLE integrator, a constrained version of the Stoermer-Verlet method. The behavior of the methods is illustrated on two effectively 1+1-dimensional versions of Einstein's equations, that allow to investigate a perturbed Minkowski problem and the Schwarzschild space-time. We compare symplectic and non-symplectic integrators for free evolution, showing very different numerical behavior for nearly-conserved quantities in the perturbed Minkowski problem. Further we compare free and constrained evolution, demonstrating in our examples that enforcing the momentum constraints can turn an unstable free evolution into a stable constrained evolution. This is demonstrated in the stabilization of a perturbed Minkowski problem with Dirac gauge, and in the suppression of the propagation of boundary instabilities into the interior of the domain in Schwarzschild space-time.

Ronny Richter; Christian Lubich

2008-07-07T23:59:59.000Z

9

Integrated tracking and recognition of human activities in shape space  

Science Conference Proceedings (OSTI)

Activity recognition consists of two fundamental tasks: tracking the features/objects of interest, and recognizing the activities. In this paper, we show that these two tasks can be integrated within the framework of a dynamical feedback system. In our ...

Bi Song; Amit K. Roy-Chowdhury; N. Vaswani

2006-12-01T23:59:59.000Z

10

NEDO Research Related to Battery Storage Applications for Integration of  

Open Energy Info (EERE)

Page Page Edit with form History Facebook icon Twitter icon 禄 NEDO Research Related to Battery Storage Applications for Integration of Renewable Energy Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Spain Installed Wind Capacity Website Focus Area: Renewable Energy Topics: Market Analysis Website: www.gwec.net/index.php?id=131 Equivalent URI: cleanenergysolutions.org/content/spain-installed-wind-capacity-website Language: English Policies: Regulations Regulations: Feed-in Tariffs This website presents an overview of total installed wind energy capacity in Spain per year from 2000 to 2010. The page also presents the main market developments from 2010; a policy summary; a discussion of the revision in feed-in tariffs in 2010; and a future market outlook.

11

Integrating Pollution Prevention with NEPA Planning Activities | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Integrating Pollution Prevention with NEPA Planning Activities Integrating Pollution Prevention with NEPA Planning Activities Integrating Pollution Prevention with NEPA Planning Activities The purpose of this memorandum is to advise you of the direction that the Environmental Protection Agency (EPA) and Council on Environmental Quality (CEQ) appear to be taking regarding pollution prevention and NEPA, and to encourage the use of the NEPA process to incorporate pollution prevention principles into the DOE planning and decisionmaking process. Integrating Pollution Prevention with NEPA Planning Activities More Documents & Publications Memorandum to Heads of Federal Departments and Agencies Regarding Pollution Prevention and the National Environmental Policy Act Guidance Regarding NEPA Regulations DOE NEPA Guidance and Requirements - Search Index - Table of Contents

12

NREL: Transmission Grid Integration - Active Power Controls  

NLE Websites -- All DOE Office Websites (Extended Search)

Active Power Controls Active Power Controls NREL has teamed with the Electric Power Research Institute, the Colorado School of Mines, the University of Colorado, and other industry members to research the potential of wind turbines and power plants to provide active power control (also known as real power or frequency control) to the electric power system. Under this multiyear project, researchers will perform simulations and field tests at the National Wind Technology Center to analyze system benefits and impacts on the operations of wind turbines and the electric power system. The project considers five topics: Steady state and economics Dynamic interconnection stability Controls design and simulation Controls testing and loads and structural impacts Dissemination of results.

13

NREL: State and Local Activities - Related Links  

NLE Websites -- All DOE Office Websites (Extended Search)

Related Links Related Links Find information about U.S. Department of Energy (DOE) and other state and local clean energy technical assistance and deployment programs and activities. State and Local Technical Assistance Programs NREL provides technical assistance to state and local energy projects through the following initiatives and programs. DOE Green Power Network DOE Weatherization & Intergovernmental Program U.S. Department of Agriculture Rural Energy for America Program For more information about NREL's role, contact Dave Peterson. State and Local Deployment Programs NREL strives to increase the scale of clean energy technology deployment in U.S. states and localities by supporting these technology deployment projects and initiatives. DOE Biomass Program DOE Builders Challenge

14

Usage Of New Activation Function In Neuro-Symbolic Integration  

SciTech Connect

New activation function is examined for its ability to accelerate the performance of doing logic programming in Hopfield network. This method has a higher capacity and upgrades the neuro symbolic integration. Computer simulations are carried out to validate the effectiveness of the new activation function. Empirical results obtained support our theory.

Sathasivam, Saratha [School of Mathematical Sciences, Universiti Sains Malaysia, 11800 USM, Penang (Malaysia)

2010-12-23T23:59:59.000Z

15

EPRI Pre-Conference Workshop: Active Distribution System Management for Integration of Distributed Resources Research, Development a nd Demonstration Needs  

Science Conference Proceedings (OSTI)

This report documents the proceedings of the EPRI Pre-Conference Workshop: Active Distribution System Management for Integration of Distributed ResourcesResearch, Development and Demonstration Needs, held December 9, 2008. This workshop presented over 20 projects related to active distribution management for distributed energy resource (DER) integration.

2009-04-27T23:59:59.000Z

16

Relative Entropy and Free Energy Dualities: Connections to Path Integral and KL control  

E-Print Network (OSTI)

Relative Entropy and Free Energy Dualities: Connections to Path Integral and KL control Evangelos A and the fundamental dualities between free energy and relative entropy. We derive the path integral optimal control on Dynamic Programming with PI based on the duality between free energy and relative entropy. Moreover we

Anderson, Richard

17

Model Dependencies, Fine-Grained Relations, and Integrator Tools  

Science Conference Proceedings (OSTI)

The models developed within subprojects A2 and B2 together form one of the vertical columns of the process/product model. The application domain models of A2 are refined to tool models of B2 such that integrator tools can be realized. The process of ...

S. Becker; W. Marquardt; J. Morbach; M. Nagl

2008-04-01T23:59:59.000Z

18

Integrated gasification combined-cycle research development and demonstration activities  

Science Conference Proceedings (OSTI)

The United States Department of Energy (DOE) has selected six integrated gasification combined-cycle (IGCC) advanced power systems for demonstration in the Clean Coal Technology (CCT) Program. DOE`s Office of Fossil Energy, Morgantown Energy Technology Center, is managing a research development and demonstration (RD&D) program that supports the CCT program, and addresses long-term improvements in support of IGCC technology. This overview briefly describes the CCT projects and the supporting RD&D activities.

Ness, H.M.; Reuther, R.B.

1995-12-01T23:59:59.000Z

19

Integration of hydrothermal energy economics related quantitative studies  

DOE Green Energy (OSTI)

An evaluation of the existing hydrothermal energy economics related quantitative studies is provided. The objective is to present the similarities and differences in methodology and assumptions, and explain the impact of these differences on the energy price estimates. A brief summary of the study categories, economic evaluation methodology, technical and economic assumptions and major outputs of the studies is presented. The relative importance and the likely effects of the most important technical and economic factors on the cost of energy are discussed. The sensitivity analysis results provided are useful in judging the credibility as well as the relative weaknesses and strengths of the various cost of energy estimation studies. The major conclusions of the evaluation and the recommendations for future research are presented.

Not Available

1982-10-01T23:59:59.000Z

20

Computing Relative Free Energies of Solvation Using Single Reference Thermodynamic Integration Augmented  

E-Print Network (OSTI)

Computing Relative Free Energies of Solvation Using Single Reference Thermodynamic Integration relative transformation free energies in a series of molecules with respect to a single reference state of the SR-TI variant is demonstrated in calculations of relative solvation free energies for a series

Note: This page contains sample records for the topic "integration activities related" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Geomechanical Simulations Related to UCG Activities  

SciTech Connect

This paper presents results from a recent investigation into a range of geomechanical processes induced by UCG activities. The mechanical response of the coal and host rock mass plays a role in every stage of UCG operations. For example, cavity collapse during the burn has significant effect upon the rate of the burn itself. In the vicinity of the cavity, collapse and fracturing may result in enhanced hydraulic conductivity of the rock matrix above the burn chamber. Even far from the cavity, stresses due to subsidence may be sufficient to induce new fractures linking previously isolated aquifers. These mechanical processes are very important in understanding the risk of unacceptable subsidence and the potential for groundwater contamination. The mechanical processes are inherently non-linear, involving significant inelastic response, especially in the region closest to the cavity. in addition, the response of the rock mass involves both continuum and discrete mechanical behavior. To better understand these effects, they have applied a suite of highly non-linear computational tools in both two and three dimensions to a series of UCG scenarios. The calculations include combinations of continuum and discrete mechanical responses by employing fully coupled finite element and discrete element capabilities.

Vorobiev, O; Morris, J; Antoun, T; Friedmann, S J

2008-07-11T23:59:59.000Z

22

Active Desiccant Dehumidification Module Integration with Rooftop Packaged HVAC  

Science Conference Proceedings (OSTI)

This report summarizes a research and development program that produced a stand-alone active desiccant module (ADM) that can be easily integrated with new or existing packaged cooling equipment. The program also produced a fully integrated hybrid system, combining the active desiccant section with a conventional direct expansion air-conditioning unit, that resulted in a compact, low-cost, energy-efficient end product. Based upon the results of this investigation, both systems were determined to be highly viable products for commercialization. Major challenges--including wheel development, compact packaging, regeneration burner development, control optimization, and low-cost design--were all successfully addressed by the final prototypes produced and tested as part of this program. Extensive laboratory testing was completed in the SEMCO laboratory for each of the two ADM system approaches. This testing confirmed the performance of the ADM systems to be attractive compared with that of alternate approaches currently used to precondition outdoor air, where a return air path is not readily available for passive desiccant recovery or where first cost is the primary design criterion. Photographs, schematics, and performance maps are provided for the ADM systems that were developed; and many of the control advantages are discussed. Based upon the positive results of this research and development program, field tests are under way for fully instrumented pilot installations of ADM systems in both a hotel/motel and a restaurant.

Fischer, J

2002-04-17T23:59:59.000Z

23

Activity-rotation relations for lower main-sequence stars  

Science Conference Proceedings (OSTI)

It has been known for some time that stellar rotation and activity are related, both for chromospheric activity (e.g., Noyes et al. 1984) and coronal activity (e.g., Pallavicini et al. 1981; Maggio et al. 1987). Younger, more rapidly rotating stars of a given spectral type generally show higher levels of activity than do older, more slowly rotating stars. On the Sun, activity is distinctly related to magnetic fields. This leads to the suggestion that activity, at least in solar-type stars, is traceable to a magnetic dynamo which results from the interaction of rotation and differential rotation with convection. The more efficient the coriolis forces are at introducing helicity into convective motions, the more the magnetic field will be amplified and the more activity we may expect to see. The precise nature of the relationship between magnetic fields, rotation, and activity remains to be well-defined. This thesis examines the relationship between activity (both chromospheric and coronal) and rotation in order to better define and express such a relation (or relations).

Dobson-Hockey, A.K.

1987-01-01T23:59:59.000Z

24

Abstract --The paper discusses issues related to integration of substation IED data. The approach to discussion is based on the  

E-Print Network (OSTI)

) is a Senior Consulting Engineer in the Substation Projects Division of the Substation Operations DepartmentAbstract -- The paper discusses issues related to integration of substation IED data. The approach to discussion is based on the purpose of integrating substation data and how the integrated data can be used

Kezunovic, Mladen

25

Integrated system for gathering, processing, and reporting data relating to site contamination  

DOE Patents (OSTI)

An integrated screening system comprises an intrusive sampling subsystem, a field mobile laboratory subsystem, a computer assisted design/geographical information subsystem, and a telecommunication linkup subsystem, all integrated to provide synergistically improved data relating to the extent of site soil/groundwater contamination. According to the present invention, data samples related to the soil, groundwater or other contamination of the subsurface material are gathered and analyzed to measure contaminants. Based on the location of origin of the samples in three-dimensional space, the analyzed data are transmitted to a location display. The data from analyzing samples and the data from the locating the origin are managed to project the next probable sample location. The next probable sample location is then forwarded for use as a guide in the placement of ensuing sample location, whereby the number of samples needed to accurately characterize the site is minimized.

Long, Delmar D. (Oak Ridge, TN); Goldberg, Mitchell S. (Lenior City, TN); Baker, Lorie A. (Oak Ridge, TN)

1997-01-01T23:59:59.000Z

26

Integrated system for gathering, processing, and reporting data relating to site contamination  

DOE Patents (OSTI)

An integrated screening system comprises an intrusive sampling subsystem, a field mobile laboratory subsystem, a computer assisted design/geographical information subsystem, and a telecommunication linkup subsystem, all integrated to provide synergistically improved data relating to the extent of site soil/groundwater contamination. According to the present invention, data samples related to the soil, groundwater or other contamination of the subsurface material are gathered and analyzed to measure contaminants. Based on the location of origin of the samples in three-dimensional space, the analyzed data are transmitted to a location display. The data from analyzing samples and the data from the locating the origin are managed to project the next probable sample location. The next probable sample location is then forwarded for use as a guide in the placement of ensuing sample location, whereby the number of samples needed to accurately characterize the site is minimized. 10 figs.

Long, D.D.; Goldberg, M.S.; Baker, L.A.

1997-11-11T23:59:59.000Z

27

UTSI/CFFF MHD PROGRAM COMPLETION AND RELATED ACTIVITY  

DOE Green Energy (OSTI)

Maintenance work on the DOE CFFF facility and other related government property is no longer authorized under this contract in accordance with the DOE-UT Settlement Agreement. Environmental remediation preservation of the facility continued. Government property has been transferred to UTSI as owner which frees up many items for proper disposal. Actions are underway to dispose of other wastes, and control pests and water at the DOE CFFF. Groundwater remediation activities as mandated by the Tennessee Department of Environment and Conservation (TDEC) continued throughout the quarter. A contract was awarded to an environmental consulting company to drill and sample three additional groundwater wells adjacent to the CFFF property. A report on this activity, with results of the sample analysis, has been sent to the TDEC.

Unknown

2002-03-31T23:59:59.000Z

28

UTSI/CFFF MHD PROGRAM COMPLETION AND RELATED ACTIVITY  

DOE Green Energy (OSTI)

Maintenance work on the DOE CFFF facility and other related government property is no longer authorized under this contract in accordance with the DOE-UT Settlement Agreement. Environmental remediation preservation of the facility continued. Government property has been transferred to UTSI as owner which frees up many items for proper disposal. Actions are underway to dispose of other wastes, and control pests and water at the DOE CFFF. Groundwater remediation activities as mandated by the Tennessee Department of Environment and Conservation (TDEC) continued throughout the quarter. A contract was awarded to an environmental consulting company to drill and sample three additional groundwater wells adjacent to the CFFF property. A report on this activity, with results of the sample analysis, has been sent to the TDEC.

Unknown

2002-10-01T23:59:59.000Z

29

UTSI/CFFF MHD PROGRAM COMPLETION AND RELATED ACTIVITY  

DOE Green Energy (OSTI)

Maintenance work on the DOE CFFF facility and other related government property is no longer authorized under this contract in accordance with the DOE-UT Settlement Agreement. Environmental remediation preservation of the facility continued. Government property has been transferred to UTSI as owner which frees up many items for proper disposal. Actions are underway to dispose of other wastes, and control pests and water at the DOE CFFF. Groundwater remediation activities as mandated by the Tennessee Department of Environment and Conservation (TDEC) continued throughout the quarter. A contract was awarded to an environmental consulting company to drill and sample three additional groundwater wells adjacent to the CFFF property. A report on this activity, with results of the sample analysis, has been sent to the TDEC.

Unknown

2002-07-01T23:59:59.000Z

30

Enforcement Letter; Quality Assurance Deficiencies Related to Weapon Activities  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2, 2005 2, 2005 Dr. Michael R. Anastasio Director Lawrence Livermore National Laboratory P.O. Box 808, L-001 Livermore, CA 94550 Subject: Enforcement Letter - Quality Assurance Deficiencies Related to Weapon Activities Dear Dr. Anastasio: This letter is to inform you of the Department of Energy's (DOE) concern regarding several quality assurance-related deficiencies involving actions by Lawrence Livermore National Laboratory (LLNL) personnel. These deficiencies were associated with a cracked explosive event that occurred at the Pantex site in January 2004. The timing of this letter is intended to coincide with a DOE enforcement action stemming from this event. During the dismantlement of a retired nuclear weapon, for which LLNL was the design

31

Report of the Integrated Program Planning Activity for the DOE Fusion Energy Sciences Program  

SciTech Connect

This report of the Integrated Program Planning Activity (IPPA) has been prepared in response to a recommendation by the Secretary of Energy Advisory Board that, ''Given the complex nature of the fusion effort, an integrated program planning process is an absolute necessity.'' We, therefore, undertook this activity in order to integrate the various elements of the program, to improve communication and performance accountability across the program, and to show the inter-connectedness and inter-dependency of the diverse parts of the national fusion energy sciences program. This report is based on the September 1999 Fusion Energy Sciences Advisory Committee's (FESAC) report ''Priorities and Balance within the Fusion Energy Sciences Program''. In its December 5,2000, letter to the Director of the Office of Science, the FESAC has reaffirmed the validity of the September 1999 report and stated that the IPPA presents a framework and process to guide the achievement of the 5-year goals listed in the 1999 report. The National Research Council's (NRC) Fusion Assessment Committee draft final report ''An Assessment of the Department of Energy's Office of Fusion Energy Sciences Program'', reviewing the quality of the science in the program, was made available after the IPPA report had been completed. The IPPA report is, nevertheless, consistent with the recommendations in the NRC report. In addition to program goals and the related 5-year, 10-year, and 15-year objectives, this report elaborates on the scientific issues associated with each of these objectives. The report also makes clear the relationships among the various program elements, and cites these relationships as the reason why integrated program planning is essential. In particular, while focusing on the science conducted by the program, the report addresses the important balances between the science and energy goals of the program, between the MFE and IFE approaches, and between the domestic and international aspects of the program. The report also outlines a process for establishing a database for the fusion research program that will indicate how each research element fits into the overall program. This database will also include near-term milestones associated with each research element, and will facilitate assessments of the balance within the program at different levels. The Office of Fusion Energy Sciences plans to begin assembling and using the database in the Spring of 2001 as we receive proposals from our laboratories and begin to prepare our budget proposal for Fiscal Year 2003.

None

2000-12-01T23:59:59.000Z

32

DOE Annual Reports to Congress On Board-Related Activities -...  

NLE Websites -- All DOE Office Websites (Extended Search)

Laboratory (ORNL)) C Bechtel Jacobs Company, LLC (for management and integration of Environmental ManagementUranium Enrichment work) C BNFL Inc (for metal recycle and...

33

NREL: Transmission Grid Integration - Publications  

NLE Websites -- All DOE Office Websites (Extended Search)

Publications Publications Want updates about future transmission grid integration webinars and publications? Join our mailing list. NREL has an extensive collection of publications related to transmission integration research. Explore the resources below to learn more. Selected Project Publications Read selected publications related to these transmission integration projects: Western Wind and Solar Integration Study Eastern Renewable Generation Integration Study Oahu Wind Integration and Transmission Study Flexible Energy Scheduling Tool for Integration of Variable generation (FESTIV) Active power controls Forecasting Grid Simulation. NREL Publications Database NREL's publications database offers a variety of documents related to transmission integration that were written by NREL staff and

34

MIDAS: Multi-device Integrated Dynamic Activity Spaces  

E-Print Network (OSTI)

Mobile phones, tablet computers, laptops, desktops, and large screen displays are increasingly available to individuals for information access, often simultaneously. Dominant content access protocols, such as HTTP/1.1, do not take advantage of this device multiplicity and support information access from single devices only. Changing devices means restarting an information session. Using devices in conjunction with each other poses several challenges, which include the presentation of content on devices with diverse form factors and propagation of the content changes across these devices. In this dissertation, I report on the design and implementation of MIDAS - architecture and a prototype system for multi-device presentations. I propose a framework, called 12C, for characterizing multi-device systems and evaluate MIDAS within this framework. MIDAS is designed as a middleware that can work with multiple client-server architectures, such as the Web and context-aware Trellis, a non-Web hypertext system. It presents information content simultaneously on devices with diverse characteristics without requiring sensor-enhanced environments. The system adapts content elements for optimal presentation on the target device while also striving to retain fidelity with the original form from a human perceptual perspective. MIDAS reconfigures its presentation in response to user actions, availability of devices, and environmental context, such as a user's location or the time of day. I conducted a pilot study that explored human perception of similarity when image attributes such as size and color depth are modified in the process of presenting images on different devices. The results indicated that users tend to prefer scaling of images to color-depth reduction but gray scaling of images is preferable to either modification. Not all images scale equally gracefully; those dominated by natural elements or manmade structures scale exceptionally well. Images that depict recognizable human faces or textual elements should be scaled only to an extent that these features retain their integrity. Attributes of the 12C framework describe aspects of multi-device systems that include infrastructure, presentation, interaction, interface, and security. Based on these criteria, MIDAS is a flexible infrastructure, which lends itself to several content distribution and interaction strategies by separating client- and server-side configuration.

Karadkar, Unmil Purushottam

2011-12-01T23:59:59.000Z

35

Plan for certification and related activities for the Department of Energy Strategic Petroleum Reserve oil storage caverns  

SciTech Connect

In order to comply with state laws, protect the environment, and protect the national investment in oil stored, it is necessary to periodically verify the integrity of the Department of Energy Strategic Petroleum Reserve (DOE/SPR) oil storage caverns. The task of developing plans for cavern certification was a responsibility in Sandia's role of geotechnical support for the SPR program. As an implementation of this task, this report includes a plan and procedures for tests and related activities to evaluate the integrity of the DOE/SPR oil storage caverns. 2 references.

Goin, K.L.

1983-12-01T23:59:59.000Z

36

UTSI/CFFF MHD PROGRAM COMPLETION AND RELATED ACTIVITY  

SciTech Connect

Maintenance work on the DOE CFFF facility and other related government property is no longer authorized under this contract in accordance with the DOE-UT Settlement Agreement. Environmental remediation preservation of the facility continued. Government property has been transferred to UTSI as owner which frees up many items for proper disposal. Actions are underway to dispose of other wastes, and control pests and water at the DOE CFFF. Only one high temperature superconductivity project is active under Task 6. Under the particular Subtask 6.02, samples of nickel obtained from Plastronics, Inc. were coated with the LAO precursor solution. These coated samples have been characterized using the x-ray diffraction unit, and the results from the x-ray diffraction characterizations were further analyzed using a statistical program to develop multi-regression coefficients. Based on these regression coefficients, the variables that have significant effect on the coating of LAO over nickel substrate have been identified. A Master of Science thesis was prepared describing these findings and it will be defended in front of the committee members during July, 2000.

Unknown

2000-08-01T23:59:59.000Z

37

Recent CFD-Related Activities at the High  

E-Print Network (OSTI)

路 early CFD activities at HFIR 路 cold-source (and other upgrades)CFD activities at HFIR 路 LEU Conversion this then at a research reactor ? 路 1991 started at HFIR 路 1992 graduation 路 ~ 2003 COMSOL becomes the tool of choice (Freels) Early CFD Activities at HFIR #12;Freels ,CFD Colloquium at UTK,in honor of A, J. Baker, 05

Tennessee, University of

38

Mass burning rate of premixed stretched flames: integral analysis versus large activation energy asymptotics  

E-Print Network (OSTI)

Mass burning rate of premixed stretched flames: integral analysis versus large activation energy, The Netherlands Abstract. New expressions for the mass burning rate are derived from a recently introduced burning rate. The consequences for experimental and numerical studies are investigated. Keywords: premixed

Eindhoven, Technische Universiteit

39

UTSI/CFFF MHD PROGRAM COMPLETION AND RELATED ACTIVITY  

DOE Green Energy (OSTI)

Groundwater remediation activities as mandated by the Tennessee Department of Environment and Conservation (TDEC) continued throughout the quarter. A contract was awarded to an environmental consulting company to drill and sample three additional groundwater wells adjacent to the CFFF property. A report on this activity, with results of the sample analysis, has been sent to the TDEC.

Joel W. Muehlhauser

2003-04-28T23:59:59.000Z

40

HYBRID GREY RELATIONAL ARTIFICIAL NEURAL NETWORK AND AUTO REGRESSIVE INTEGRATED MOVING AVERAGE MODEL FOR FORECASTING TIME-SERIES DATA  

Science Conference Proceedings (OSTI)

The aim of this study is to develop a new hybrid model by combining a linear and nonlinear model for forecasting time-series data. The proposed model (GRANN_ARIMA) integrates nonlinear grey relational artificial neural network (GRANN) and a linear autoregressive ...

Roselina Sallehuddin; Siti Mariyam Hj. Shamsuddin

2009-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "integration activities related" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Nondestructive Evaluation: 5th International Conference on NDE in Relation to Structural Integrity for Nuclear and Pressurized Compo nents  

Science Conference Proceedings (OSTI)

The 5th International Conference on NDE in Relation to Structural Integrity for Nuclear and Pressurized Components was held May 1012, 2006, in San Diego, California. The conference was co-organized by the EPRI NDE Center and the European Commissions Joint Research Centre, Institute for Energy (EC-JRC/IE). The theme of this conference series is to provide a link between the information originated by NDE and the use made of this information in assessing structural integrity. In this context, there is often...

2006-12-13T23:59:59.000Z

42

RECENT ADDITIONS OF CRITICALITY SAFETY RELATED INTEGRAL BENCHMARK DATA TO THE ICSBEP AND IRPHEP HANDBOOKS  

SciTech Connect

High-quality integral benchmark experiments have always been a priority for criticality safety. However, interest in integral benchmark data is increasing as efforts to quantify and reduce calculational uncertainties accelerate to meet the demands of future criticality safety needs to support next generation reactor and advanced fuel cycle concepts. The importance of drawing upon existing benchmark data is becoming more apparent because of dwindling availability of critical facilities worldwide and the high cost of performing new experiments. Integral benchmark data from the International Handbook of Evaluated Criticality Safety Benchmark Experiments and the International Handbook of Reactor Physics Benchmark Experiments are widely used. Benchmark data have been added to these two handbooks since the last Nuclear Criticality Safety Division Topical Meeting in Knoxville, Tennessee (September 2005). This paper highlights these additions.

J. Blair Briggs; Lori Scott; Yolanda Rugama; Enrico Sartori

2009-09-01T23:59:59.000Z

43

Integrated gasification combined-cycle research development and demonstration activities in the US  

Science Conference Proceedings (OSTI)

The United States Department of Energy (DOE)`s Office of Fossil Energy, Morgantown Energy Technology Center, is managing a research development and demonstration (RD&D) program that supports the commercialization of integrated gasification combined-cycle (IGCC) advanced power systems. This overview briefly describes the supporting RD&D activities and the IGCC projects selected for demonstration in the Clean Coal Technology (CCT) Program.

Ness, H.M.; Brdar, R.D.

1996-09-01T23:59:59.000Z

44

Integrated gasification combined-cycle research development and demonstration activities in the U.S.  

Science Conference Proceedings (OSTI)

The United States Department of Energy (DOE) has selected seven integrated gasification combined-cycle (IGCC) advanced power systems for demonstration in the Clean Coal Technology (CCT) Program. DOE`s Office of Fossil Energy, Morgantown Energy Technology Center, is managing a research development and demonstration (RD&D)program that supports the CCT program, and addresses long-term improvements in support of IGCC technology. This overview briefly describes the CCT projects and the supporting RD&D activities.

Ness, H.M.

1994-12-31T23:59:59.000Z

45

UTSI/CFFF MHD PROGRAM COMPLETION AND RELATED ACTIVITY  

DOE Green Energy (OSTI)

Maintenance work on the DOE CFFF facility and other related government property is no longer authorized under this contract in accordance with the DOE-UT Settlement Agreement. Environmental remediation preservation of the facility continued. Government property has been transferred to UTSI as owner which frees up many items for proper disposal. Actions are underway to dispose of other wastes, and control pests and water at the DOE CFFF.

Unknown

2001-07-01T23:59:59.000Z

46

Development of a CO2 Sequestration Module by Integrating Mineral Activation and Aqueous Carbonation  

SciTech Connect

Mineral carbonation is a promising concept for permanent CO{sub 2} sequestration due to the vast natural abundance of the raw materials and the permanent storage of CO{sub 2} in solid form as carbonates. The sequestration of CO{sub 2} through the employment of magnesium silicates--olivine and serpentine--is beyond the proof of concept stage. For the work done in this project, serpentine was chosen as the feedstock mineral due to its abundance and availability. Although the reactivity of olivine is greater than that of serpentine, physical and chemical treatments have been shown to increase greatly the reactivity of serpentine. The primary drawback to mineral carbonation is reaction kinetics. To accelerate the carbonation, aqueous processes are preferred, where the minerals are first dissolved in solution. In aqueous carbonation, the key step is the dissolution rate of the mineral, where the mineral dissolution reaction is likely to be surface-controlled. The relatively low reactivity of serpentine has warranted research into physical and chemical treatments that have been shown to greatly increase its reactivity. The use of sulfuric acid as an accelerating medium for the removal of magnesium from serpentine has been investigated. To accelerate the dissolution process, the mineral can be ground to very fine particle size, <37 {micro}m, but this is a very energy-intensive process. Previous work in our laboratory showed that chemical surface activation helps to dissolve magnesium from the serpentine (of particle size {approx} 100 {micro}m) and that the carbonation reaction can be conducted under mild conditions (20 C and 4.6 MPa) compared to previous studies that required >185 C, >13 MPa, and <37 {micro}m particle size. This work also showed that over 70% of the magnesium can be extracted at ambient temperature, leaving an amorphous silica with surface area of about 330 m{sup 2}/g. The overall objective of this research program is to optimize the active carbonation process to design an integrated CO{sub 2} sequestration module. A parametric study was conducted to optimize conditions for mineral activation, in which serpentine and sulfuric acid were reacted. The study focused on the effects of varying the acid concentration, particle size, and reaction time. The reaction yield was as high as 48% with a 5 M acid concentration, with lower values directly corresponding to lower acid concentrations. Significant improvements in the removal of moisture, as well as in the dissolution, can be realized with comminution of particles to a D{sub 50} less than 125 ?m. A minimum threshold of 3 M concentration of sulfuric acid was found to exist in terms of removal of moisture from serpentine. The effect of reaction time was insignificant. The treated serpentine had low BET surface areas. Results demonstrated that acid concentration provided primary control on the dissolution via the removal of water, which is closely correlated with the extraction of magnesium from serpentine. Single-variable experimentation demonstrated dissolution enhancements with increased reaction time and temperature. An increase in magnesium dissolution of 46% and 70%, relative to a baseline test, occurred for increased reaction time and temperature, respectively. In addition to the challenges presented by the dissolution of serpentine, another challenge is the subsequent carbonation of the magnesium ions. A stable hydration sphere for the magnesium ion reduces the carbonation kinetics by obstructing the formation of the carbonation products. Accordingly, this research has evaluated the solubility of carbon dioxide in aqueous solution, the interaction between the dissociation products of carbon dioxide, and the carbonation potential of the magnesium ion.

George Alexander; Parvana Aksoy; John Andresen; Mercedes Maroto-Valer; Harold Schobert

2006-08-14T23:59:59.000Z

47

UTSI/CFFF MHD program completion and related activities  

DOE Green Energy (OSTI)

Maintenance work on the DOE CFFF facility remained in suspension for the entire quarter in accordance with the stop work order issued the previous quarter. Work resumed on the environmental restoration activities during the quarter and work performed is summarized. Progress continued on the five (5) high temperature superconductivity projects under Task 6. On the sol-gel process, improvement is reported in application of buffer layers to single crystals. Problems are discussed in applying buffer layers to nickel substrates. The status of cost performance studies is summarized. The status of diagnostic measurements directed toward real time control of manufacturing processes is reported with emphasis on measurement of surface smoothness. The results of atomic absorption measurement of MOCVD precursors are reported.

Muehlhauser, J.W.; Chapman, J.N.

1999-04-30T23:59:59.000Z

48

DOE standard: Integration of environment, safety, and health into facility disposition activities. Volume 1: Technical standard  

Science Conference Proceedings (OSTI)

This Department of Energy (DOE) technical standard (referred to as the Standard) provides guidance for integrating and enhancing worker, public, and environmental protection during facility disposition activities. It provides environment, safety, and health (ES and H) guidance to supplement the project management requirements and associated guidelines contained within DOE O 430.1A, Life-Cycle Asset Management (LCAM), and amplified within the corresponding implementation guides. In addition, the Standard is designed to support an Integrated Safety Management System (ISMS), consistent with the guiding principles and core functions contained in DOE P 450.4, Safety Management System Policy, and discussed in DOE G 450.4-1, Integrated Safety Management System Guide. The ISMS guiding principles represent the fundamental policies that guide the safe accomplishment of work and include: (1) line management responsibility for safety; (2) clear roles and responsibilities; (3) competence commensurate with responsibilities; (4) balanced priorities; (5) identification of safety standards and requirements; (6) hazard controls tailored to work being performed; and (7) operations authorization. This Standard specifically addresses the implementation of the above ISMS principles four through seven, as applied to facility disposition activities.

NONE

1998-05-01T23:59:59.000Z

49

Permits and Easements for Construction and Related Activities on Public Lands and Waters (Iowa)  

Energy.gov (U.S. Department of Energy (DOE))

These rules establish procedures and regulate the evaluation and issuance of permits for construction or other related activities that alter the physical characteristics of public lands and waters...

50

UTSI/CFFF MHD program completion and related activity  

DOE Green Energy (OSTI)

Maintenance work on the DOE CFFF facility and other related government property remained in suspension in accordance with the stop work order issued by DOE. Environmental remediation and preservation of the facility continued. Final actions were completed to dispose of the soil that was contaminated by diesel oil. Actions are underway to dispose of other wastes. Progress is reported on the 5 high temperature superconductivity projects under Task 6. Results are reported for various techniques for annealing cold rolled nickel tapes and applying buffer layer by the Sol-Gel process. Included in the annealing/coating work is one case that involved oxidizing the nickel to nickel oxide which is textured before application of the buffer layer. Work under the Optimum Coated Conductor included issuing a topical report describing the work on grain boundary grooving in nickel substrates as a function of annealing temperature and time. Also, the work to evaluate the mutual effects of adjacent superconductors. In the cost/performance analysis project, completion of a study on the economics of production of coated conductors by the MOCVD process is reported. In the diagnostics for real time process control project, a topical report that outlines the requirements for control of promising manufacturing processes was submitted, additional work is reported on using absorption spectroscopy as the basis for control of the stoichiometry for the MOCVD process and the work on scatterometry for measuring uniformity of surfaces is summarized.

Dr. Joel W. Muehlhauser; Dr. James N. Chapman

1999-07-30T23:59:59.000Z

51

Integrated assessment and the relation between land-use change and climate change  

SciTech Connect

Integrated assessment is an approach that is useful in evaluating the consequences of global climate change. Understanding the consequences requires knowledge of the relationship between land-use change and climate change. Methodologies for assessing the contribution of land-use change to atmospheric CO{sub 2} concentrations are considered with reference to a particular case study area: south and southeast Asia. The use of models to evaluate the consequences of climate change on forests must also consider an assessment approach. Each of these points is discussed in the following four sections.

Dale, V.H.

1994-10-07T23:59:59.000Z

52

Existing and Past Methods of Test and Rating Standards Related to Integrated Heat Pump Technologies  

Science Conference Proceedings (OSTI)

This report evaluates existing and past US methods of test and rating standards related to electrically operated air, water, and ground source air conditioners and heat pumps, 65,000 Btu/hr and under in capacity, that potentiality incorporate a potable water heating function. Two AHRI (formerly ARI) standards and three DOE waivers were identified as directly related. Six other AHRI standards related to the test and rating of base units were identified as of interest, as they would form the basis of any new comprehensive test procedure. Numerous other AHRI and ASHRAE component test standards were also identified as perhaps being of help in developing a comprehensive test procedure.

Reedy, Wayne R. [Sentech, Inc.

2010-07-01T23:59:59.000Z

53

Climatologically Tuned Reflectivity-Rain Rate Relations and Links to Area-Time Integrals  

Science Conference Proceedings (OSTI)

Relations between either the point- or beam-averaged effective reflectivity, Ze, and surface rain rate, R, are determined by a probability matching method similar to that of Calheiros and Zawadzki, and Rosenfeld. The cumulative density functions (...

David Atlas; Daniel Rosenfeld; David B. Wolff

1990-11-01T23:59:59.000Z

54

Current Activities Assessing Butt Fusion Joint Integrity in High Density Polyethylene Piping  

SciTech Connect

The Pacific Northwest National Laboratory (PNNL) in Richland, Washington, conducted initial studies to evaluate the effectiveness of nondestructive examinations (NDE) coupled with mechanical testing for assessing butt fusion joint integrity in high density polyethylene (HDPE) pipe. The work provided insightful information to the United States Nuclear Regulatory Commission (NRC) on the effectiveness of volumetric inspection techniques for detecting lack of fusion (LOF) conditions in the fusion joints. HDPE has been installed on a limited basis in American Society of Mechanical Engineers (ASME) Class 3, buried piping systems at several operating U.S. nuclear power plants and has been proposed for use in new construction. A comparison was made between the results from ultrasonic and microwave nondestructive examinations and the results from mechanical destructive evaluations, specifically the high-speed tensile test and the side-bend test, for determining joint integrity. The data comparison revealed that none of the NDE techniques detected all of the lack-of-fusion conditions that were revealed by the destructive tests. Follow-on work has recently been initiated at PNNL to accurately characterize the NDE responses from machined flaws of varying size and location in PE 4710 materials as well as the LOF condition. This effort is directed at quantifying the ability of volumetric NDE techniques to detect flaws in relation to the critical flaw size associated with joint integrity. A status of these latest investigations is presented.

Crawford, Susan L.; Cinson, Anthony D.; Doctor, Steven R.; Denslow, Kayte M.

2012-09-01T23:59:59.000Z

55

Grid Integration  

SciTech Connect

Summarizes the goals and activities of the DOE Solar Energy Technologies Program efforts within its grid integration subprogram.

Not Available

2008-09-01T23:59:59.000Z

56

Relations, cards, and search templates: user-guided web data integration and layout  

Science Conference Proceedings (OSTI)

We present three new interaction techniques for aiding users in collecting and organizing Web content. First, we demonstrate an interface for creating associations between websites, which facilitate the automatic retrieval of related content. Second, ... Keywords: personalized web search, template-based representation, view and layout editing, web content extraction

Mira Dontcheva; Steven M. Drucker; David Salesin; Michael F. Cohen

2007-10-01T23:59:59.000Z

57

DOE-STD-1120-2005; Integration of Environment Safety and Health into Facility Disposition Activities  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

20-2005 20-2005 Volume 1 of 2 April 2005 DOE STANDARD INTEGRATION OF ENVIRONMENT, SAFETY, AND HEALTH INTO FACILITY DISPOSITION ACTIVITIES Volume 1 of 2: Documented Safety Analysis for Decommissioning and Environmental Restoration Projects U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. NOT MEASUREMENT SENSITIVE TS i This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (423) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000.

58

DOE-HDBK-1163-2003; Integration of Multiple Hazard Analysis Requirements and Activities  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE-HDBK-1163-2003 October 2003 DOE HANDBOOK INTEGRATION OF MULTIPLE HAZARD ANALYSIS REQUIREMENTS AND ACTIVITIES U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. TS DOE-HDBK-1163-2003 ii This document has been reproduced directly from the best available copy. It is available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. DOE-HDBK-1163-2003 iii FOREWORD 1. This Department of Energy (DOE) standard is approved for use by all DOE Components and

59

AMiBA: SCALING RELATIONS BETWEEN THE INTEGRATED COMPTON-y AND X-RAY-DERIVED TEMPERATURE, MASS, AND LUMINOSITY  

SciTech Connect

We investigate the scaling relations between the X-ray and the thermal Sunyaev-Zel'dovich effect properties of clusters of galaxies, using data taken during 2007 by the Y. T. Lee Array for Microwave Background Anisotropy (AMiBA) at 94 GHz for the six clusters A1689, A1995, A2142, A2163, A2261, and A2390. The scaling relations relate the integrated Compton-y parameter Y {sub 2500} to the X-ray-derived gas temperature T {sub e}, total mass M {sub 2500}, and bolometric luminosity L{sub X} within r {sub 2500}. Our results for the power-law index and normalization are both consistent with the self-similar model and other studies in the literature except for the Y {sub 2500}-L{sub X} relation, for which a physical explanation is given though further investigation may be still needed. Our results not only provide confidence for the AMiBA project but also support our understanding of galaxy clusters.

Huang, Chih-Wei Locutus; Wu, Jiun-Huei Proty; Liao, Yu-Wei; Lin, Kai-Yang; Wang, Fu-Cheng; Chiueh, Tzihong [Department of Physics, Institute of Astrophysics and Center for Theoretical Sciences, National Taiwan University, Taipei 10617, Taiwan (China); Ho, Paul T. P.; Koch, Patrick M.; Liu, Guo-Chin; Molnar, Sandor M.; Nishioka, Hiroaki; Altamirano, Pablo; Chang, Chia-Hao; Chang, Shu-Hao; Chang, Su-Wei; Chen, Ming-Tang; Han, Chih-Chiang; Huang, Yau-De [Institute of Astronomy and Astrophysics, Academia Sinica, P.O. Box 23-141, Taipei 10617, Taiwan (China); Umetsu, Keiichi [LeCosPA Center, National Taiwan University, Taipei 10617, Taiwan (China); Birkinshaw, Mark [Department of Physics, University of Bristol, Tyndall Avenue, Bristol BS8 1TL (United Kingdom)

2010-06-10T23:59:59.000Z

60

Perceived crime and traffic safety is related to physical activity among adults in Nigeria  

E-Print Network (OSTI)

Loukaitou-Sideris A, Eckc JE: Crime prevention and activeOyeyemi et al: Perceived crime and traffic safety is relatedARTICLE Open Access Perceived crime and traffic safety is

Oyeyemi, Adewale L; Adegoke, Babatunde O; Sallis, James F; Oyeyemi, Adetoyeje Y; De Bourdeaudhuij, Ilse

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "integration activities related" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Rain-Related Impacts on Selected Transportation Activities and Utility Services in the Chicago Area  

Science Conference Proceedings (OSTI)

An intensive meteorological study of summer precipitation in the Chicago area during 197678 furnished detailed data needed to perform a study of the impacts of rain on selected transportation-related activities and on certain utility services. ...

Jan Bertness

1980-05-01T23:59:59.000Z

62

Department of Energy Issues Call for Proposals to U.S. Universities for Nuclear Energy-Related Integrated Research Project Proposals  

Energy.gov (U.S. Department of Energy (DOE))

The U.S. Department of Energy抯 Nuclear Energy University Programs is now accepting applications from universities interested in conducting nuclear energy-related Integrated Research Projects.

63

Renewed activity from the X-ray transient SAXJ 1810.8-2609 with INTEGRAL  

E-Print Network (OSTI)

We report on the results of INTEGRAL observations of the neutron star low mass X-ray binary SAX J1810.8-2609 during its latest active phase in August 2007. The current outburst is the first one since 1998 and the derived luminosity is 1.1-2.6x10^36 erg s-1 in the 20-100 keV energy range. This low outburst luminosity and the long-term time-average accretion rate of ~5x10^-12Msolar/yr suggest that SAXJ 1810.8-2609 is a faint soft X-ray transient. During the flux increase, spectra are consistent with a thermal Comptonization model with a temperature plasma of ~23-30 keV and an optical depth of ~1.2-1.5, independent from luminosity of the system. This is a typical low hard spectral state for which the X-ray emission is attributed to the upscattering of soft seed photons by a hot, optically thin electron plasma. During the decay, spectra have a different shape, the high energy tail being compatible with a single power law. This confirm similar behavior observed by BeppoSAX during the previous outburst, with absence of visible cutoff in the hard X-ray spectrum. INTEGRAL/JEM-X instrument observed four X-ray bursts in Fall 2007. The first one has the highest peak flux (~3.5Crab in 3--25 keV) giving an upper limit to the distance of the source of about 5.7 kpc, for a LEdd~3.8x10^38 erg s^-1. The observed recurrence time of ~1.2 days and the ratio of the total energy emitted in the persistent flux to that emitted in the bursts (~73) allow us to conclude that the burst fuel was composed by mixed hydrogen and helium with X>0.4.

M. Fiocchi; L. Natalucci; J. Chenevez; A. Bazzano; A. Tarana; P. Ubertini; S. Brandt; V. Beckmann; M. Federici; R. Galis; R. Hudec

2008-11-07T23:59:59.000Z

64

Desiccant-Based Combined Systems: Integrated Active Desiccant Rooftop Hybrid System Development and Testing Final Report- Phase 4  

SciTech Connect

This report summarizes the results of a research and development (R&D) program to design and optimize an active desiccant-vapor compression hybrid rooftop system. The primary objective was to combine the strengths of both technologies to produce a compact, high-performing, energy-efficient system that could accommodate any percentage of outdoor air and deliver essentially any required combination of temperature and humidity, or sensible heat ratio (SHR). In doing so, such a product would address the significant challenges imposed on the performance capabilities of conventional packaged rooftop equipment by standards 62 and 90.1 of the American Society of Heating, Refrigerating and Air-Conditioning Engineers. The body of work completed as part of this program built upon previous R&D efforts supported by the U.S. Department of Energy and summarized by the Phase 3b report ''Active Desiccant Dehumidification Module Integration with Rooftop Packaged HVAC Units'' (Fischer and Sand 2002), in addition to Fischer, Hallstrom, and Sand 2000; Fischer 2000; and Fischer and Sand 2004. All initial design objectives established for this development program were successfully achieved. The performance flexibility desired was accomplished by a down-sized active desiccant wheel that processes only a portion of the supply airflow, which is pre-conditioned by a novel vapor compression cycle. Variable-speed compressors are used to deliver the capacity control required by a system handling a high percentage of outdoor air. An integrated direct digital control system allows for control capabilities not generally offered by conventional packaged rooftop systems. A 3000-cfm prototype system was constructed and tested in the SEMCO engineering test laboratory in Columbia, MO, and was found to operate in an energy-efficient fashion relative to more conventional systems. Most important, the system offered the capability to independently control the supply air temperature and humidity content to provide individual sensible and latent loads required by an occupied space without over-cooling and reheating air. The product was developed using a housing construction similar to that of a conventional packaged rooftop unit. The resulting integrated active desiccant rooftop (IADR) is similar in size to a currently available conventional rooftop unit sized to provide an equivalent total cooling capacity. Unlike a conventional rooftop unit, the IADR can be operated as a dedicated outdoor air system processing 100% outdoor air, as well as a total conditioning system capable of handling any ratio of return air to outdoor air. As part of this R&D program, a detailed investigation compared the first cost and operating cost of the IADR with costs for a conventional packaged approach for an office building located in Jefferson City, MO. The results of this comparison suggest that the IADR approach, once commercialized, could be cost-competitive with existing technology--exhibiting a one-year to two-year payback period--while simultaneously offering improved humidity control, indoor air quality, and energy efficiency.

Fischer, J

2005-05-06T23:59:59.000Z

65

Renewed activity from the X-ray transient SAXJ 1810.8-2609 with INTEGRAL  

E-Print Network (OSTI)

We report on the results of INTEGRAL observations of the neutron star low mass X-ray binary SAX J1810.8-2609 during its latest active phase in August 2007. The current outburst is the first one since 1998 and the derived luminosity is 1.1-2.6x10^36 erg s-1 in the 20-100 keV energy range. This low outburst luminosity and the long-term time-average accretion rate of ~5x10^-12Msolar/yr suggest that SAXJ 1810.8-2609 is a faint soft X-ray transient. During the flux increase, spectra are consistent with a thermal Comptonization model with a temperature plasma of ~23-30 keV and an optical depth of ~1.2-1.5, independent from luminosity of the system. This is a typical low hard spectral state for which the X-ray emission is attributed to the upscattering of soft seed photons by a hot, optically thin electron plasma. During the decay, spectra have a different shape, the high energy tail being compatible with a single power law. This confirm similar behavior observed by BeppoSAX during the previous outburst, with absenc...

Fiocchi, M; Chenevez, J; Bazzano, A; Tarana, A; Ubertini, P; Brandt, S; Beckmann, V; Federici, M; Galis, R; Hudec, R

2008-01-01T23:59:59.000Z

66

Load requirements for maintaining structural integrity of Hanford single-shell tanks during waste feed delivery and retrieval activities  

Science Conference Proceedings (OSTI)

This document provides structural load requirements and their basis for maintaining the structural integrity of the Hanford Single-Shell Tanks during waste feed delivery and retrieval activities. The requirements are based on a review of previous requirements and their basis documents as well as load histories with particular emphasis on the proposed lead transfer feed tanks for the privatized vitrification plant.

JULYK, L.J.

1999-09-22T23:59:59.000Z

67

Fallout fans: Negotiations over text integrity in the age of the active audience.  

E-Print Network (OSTI)

??This study investigated how fans and producers of media texts negotiate text integrity, which is defined as an ideal about the validity, wholeness, and truth (more)

Milner, Ryan M.

2008-01-01T23:59:59.000Z

68

Surveillance Guide - MAS 10.1 Implementation of the Integrated Safety Management System Process in Maintenance Activities  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Implementation of the Integrated Safety Management System (ISMS) Process in Implementation of the Integrated Safety Management System (ISMS) Process in Maintenance Activities 1.0 Objective The objective of this surveillance is to evaluate the effectiveness of the contractor's ISMS process with regard to maintenance activities. Surveillance activities encompass work planning and control, equipment status control, performance of maintenance, return to service, and closeout documentation. 2.0 References 2.1 DOE 4330.4B Maintenance Management Program 2.2 DOE 5480.19 Conduct of Operations for DOE Facilities 2.3 48 CFR 970.5204-2 Implementation of Environment, Safety, and Health into Work Planning and Execution 2.4 10 CFR 830.120 Quality Assurance 3.0 Requirements Implemented This surveillance is conducted to implement requirements of the

69

Guianas-Brazil Shrimp Fishery and Related U.S. Research Activity  

E-Print Network (OSTI)

Guianas-Brazil Shrimp Fishery and Related U.S. Research Activity Alexander Dragovich-free fishery began to crumble in 1970, as Brazil declared a 200-mile economic zone. To fish in Brazilian waters in the series of 2- and I-year agreements was signed on 9 May 1972 between the United States and Brazil

70

Filtering Heart Related Activity from Vagus Nerve Recordings in G. de Lannoy1  

E-Print Network (OSTI)

Filtering Heart Related Activity from Vagus Nerve Recordings in Rats G. de Lannoy1 , J. Marin2 , M understanding of such situations. Due to the proximity of the recording site to the heart itself and beating in this field. Due to the proximity of the recording sites to the heart and beating arteries, the vagus nerve

Verleysen, Michel

71

Issues Related to Seismic Activity Induced by the Injection of CO2 in Deep Saline Aquifiers  

NLE Websites -- All DOE Office Websites (Extended Search)

ISSUES RELATED TO SEISMIC ACTIVITY INDUCED BY THE INJECTION ISSUES RELATED TO SEISMIC ACTIVITY INDUCED BY THE INJECTION OF CO 2 IN DEEP SALINE AQUIFERS Joel Sminchak (sminchak@battelle.org; 614-424-7392) Neeraj Gupta (gupta@battelle.org; 614-424-3820) Battelle Memorial Institute 505 King Avenue Columbus, Ohio 43201 Charles Byrer (a) and Perry Bergman (b) National Energy Technology Laboratory (a) P.O. Box 880, Morgantown, WV, 26507-0880 (b) P.O. Box 10940, Pittsburgh, PA, 15236-0940 Abstract Case studies, theory, regulation, and special considerations regarding the disposal of carbon dioxide (CO 2 ) into deep saline aquifers were investigated to assess the potential for induced seismic activity. Formations capable of accepting large volumes of CO 2 make deep well injection of CO 2 an attractive option. While seismic implications must be considered for injection

72

Calculation of the performance of activated carbon at high relative humidities  

SciTech Connect

The Dubinin-Radushkevich potential theory was extended to include a term giving the effect of relative humidity on the uptake of adsorbate. This extended equation permit the adsorptive capacity of the activated charcoal in a respirator cartridge to be estimated for any combination of temperature, relative humidity, and concentration of contaminant. Application of this theory to previously published data of Werner showed a good correlation between theory and experiment. This equation is consistent with the experimental observations that 1) below a certain value, the relative humidity has little effect on the uptake of adsorbate, and 2) the effect of relative humidity, if observed, is more severe for lower than for higher concentration of contaminant.

Underhill, D.W.

1987-11-01T23:59:59.000Z

73

Arentze, Rasouli and Timmermans 1 Integrating a Multi-Agent Model of Land Development and an Activity-Based Model of  

E-Print Network (OSTI)

on Integrated Travel Demand and Network Supply Modeling, Tampa, USA. Theo Arentze, Soora Rasouli and Harry and an Activity-Based Model of Transport Demand: Progress and Developments1 Theo Arentze, Soora Rasouli and Harry aimed at integrating activity-based models of transport demand and models of land development

Kemner, Ken

74

Annual report to Congress: Department of Energy activities relating to the Defense Nuclear Facilities Safety Board, Calendar Year 1999  

SciTech Connect

This is the tenth Annual Report to the Congress describing Department of Energy activities in response to formal recommendations and other interactions with the Defense Nuclear Facilities Safety Board (Board). The Board, an independent executive-branch agency established in 1988, provides advice and recommendations to the Secretary of Energy regarding public health and safety issues at the Department's defense nuclear facilities. The Board also reviews and evaluates the content and implementation of health and safety standards, as well as other requirements, relating to the design, construction, operation, and decommissioning of the Department's defense nuclear facilities. During 1999, Departmental activities resulted in the closure of nine Board recommendations. In addition, the Department has completed all implementation plan milestones associated with three Board recommendations. One new Board recommendation was received and accepted by the Department in 1999, and a new implementation plan is being developed to address this recommendation. The Department has also made significant progress with a number of broad-based initiatives to improve safety. These include expanded implementation of integrated safety management at field sites, opening of a repository for long-term storage of transuranic wastes, and continued progress on stabilizing excess nuclear materials to achieve significant risk reduction.

None

2000-02-01T23:59:59.000Z

75

Annual report to Congress: Department of Energy activities relating to the Defense Nuclear Facilities Safety Board, calendar year 1998  

Science Conference Proceedings (OSTI)

This is the ninth Annual Report to the Congress describing Department of Energy (Department) activities in response to formal recommendations and other interactions with the Defense Nuclear Facilities Safety Board (Board). The Board, an independent executive-branch agency established in 1988, provides advice and recommendations to the Secretary of energy regarding public health and safety issues at the Department`s defense nuclear facilities. The Board also reviews and evaluates the content and implementation of health and safety standards, as well as other requirements, relating to the design, construction, operation, and decommissioning of the Department`s defense nuclear facilities. The locations of the major Department facilities are provided. During 1998, Departmental activities resulted in the proposed closure of one Board recommendation. In addition, the Department has completed all implementation plan milestones associated with four other Board recommendations. Two new Board recommendations were received and accepted by the Department in 1998, and two new implementation plans are being developed to address these recommendations. The Department has also made significant progress with a number of broad-based initiatives to improve safety. These include expanded implementation of integrated safety management at field sites, a renewed effort to increase the technical capabilities of the federal workforce, and a revised plan for stabilizing excess nuclear materials to achieve significant risk reduction.

NONE

1999-02-01T23:59:59.000Z

76

Path integral approach to the photoionization of one active electron atom by a pulsed Fock state: Fluctuations contribution  

Science Conference Proceedings (OSTI)

We model in a fully quantum mechanical way the dynamics of an atom of one optically active electron interacting with a pulsed Fock state which is linearly polarized. We use path integral methods. We derive the system's sign solved propagator which gives full information on its dynamics. We apply our method to the ionization of atomic hydrogen by a one-photon pulsed Fock state and study the contribution of the electromagnetic fluctuations.

Thrapsaniotis, E. G. [52 Vianou street, 13671 Athens, Aharnes (Greece)

2012-08-15T23:59:59.000Z

77

OFFICE OF FOSSIL ENERGY (FE) PROGRAMS ARE FOCUSED ON ACTIVITIES RELATED TO THE RELIABLE, EFFICIENT, AFFORDABLE  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

OFFICE OF FOSSIL ENERGY (FE) PROGRAMS ARE FOCUSED ON OFFICE OF FOSSIL ENERGY (FE) PROGRAMS ARE FOCUSED ON ACTIVITIES RELATED TO THE RELIABLE, EFFICIENT, AFFORDABLE AND ENVIRONMENTALLY SOUND USE OF FOSSIL FUELS, AND ENHANC- ING U.S. ECONOMIC, ENVIRONMENTAL AND ENERGY SECURITY. FE MANAGES DOE'S FOSSIL ENERGY RESEARCH AND DEVELOPMENT (FER&D) PROGRAM, WHICH INCLUDES THE CLEAN COAL POWER INITIATIVE (CCPI); CARBON CAPTURE AND STORAGE (CCS) AND POWER SYSTEMS PROGRAM; ADVANCED ENERGY SYSTEMS; THE CROSSCUTTING RESEARCH ACTIVITY; AND NATURAL GAS TECHNOLOGIES R&D PROGRAM. IN ADDITION, FE OPERATES THE STRATEGIC PETROLEUM RESERVE (SPR), THE NORTHEAST HOME HEATING OIL RESERVE, NAVAL PETROLEUM AND OIL SHALE RESERVES (NPOSR) AND ELK HILLS SCHOOL LANDS FUND. EACH OF THESE ACTIVITIES IS IN A SEPARATE APPROPRIATIONS ACCOUNT. A DESCRIPTION OF MAJOR

78

The Relation of Radar to Cloud Area-Time Integrals and Implications for Rain Measurements from Space  

Science Conference Proceedings (OSTI)

In this work we determine the relationships between satellite-based and radar-measured area-time integrals (ATI) for convective storms and show how both depend upon the climatological conditional mean rain rate Rc, and the ratio of the measured ...

David Atlas; Thomas L. Bell

1992-09-01T23:59:59.000Z

79

The Relation between Rainfall and Area朤ime Integrals at the Transition from an Arid to an Equatorial Climate  

Science Conference Proceedings (OSTI)

The area杢ime integral (ATI) method has previously been successfully used to estimate the area-averaged rain-rate distribution and the rainfall volume over an area from radar or from satellite infrared (IR) data. In most cases, the method was ...

Cheikh Mouhamed Fadel Kebe; Henri Sauvageot; Armand Nzeukou

2005-09-01T23:59:59.000Z

80

Support of Activities of the NAS in Relation to the Radiation Effects Research Foundation  

Science Conference Proceedings (OSTI)

The National Academies (NA) provides support for the activities related to the long-term follow up of the health of the survivors of the atomic bombings of Hiroshima and Nagasaki being conducted by the Radiation Effects Research Foundation (RERF) laboratories in Hiroshima and Nagasaki, Japan. The NA serves as scientific and administrative liaison between the U.S. Department of Energy (DOE) and RERF, and performs tasks in the areas of scientific oversight, information/public interface, fiscal oversight, and personnel management. The project includes recruitment and support of approximately 10 NA employees who work at RERF in Japan. Specific activities are performed consistent with the cooperative agreement抯 Statement of Work between DOE and NA and consistent with an Annual Work Plan developed by DOE and NA.

Douple, Evan B.

2006-05-31T23:59:59.000Z

Note: This page contains sample records for the topic "integration activities related" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Magnetically active vacancy related defects in irradiated GaN layers  

Science Conference Proceedings (OSTI)

We present the studies of magnetic properties of 2 MeV {sup 4}He{sup +}-irraadiated GaN grown by metal-organic chemical-vapor deposition. Particle irradiation allowed controllable introduction of Ga-vacancy in the samples. The magnetic moments with concentrations changing between 4.3 and 8.3 Multiplication-Sign 10{sup 17}cm{sup -3} showing superparamagnetic blocking at room temperature are observed. The appearance of clear hysteresis curve at T=5K with coercive field of about H{sub C} Almost-Equal-To 270 Oe suggests that the formation of more complex Ga vacancy related defects is promoted with increasing Ga vacancy content. The small concentration of the observed magnetically active defects with respect to the total Ga-vacancy concentration suggests that the presence of the oxygen/hydrogen-related vacancy complexes is the source of the observed magnetic moments.

Kilanski, L.; Tuomisto, F. [Department of Applied Physics, Aalto University, P.O. Box 11100, FI-00076 Aalto Espoo (Finland); Szymczak, R. [Institute of Physics, Polish Academy of Sciences, Al. Lotnikow 32/46, 02-668 Warsaw (Poland); Kruszka, R. [Institute of Electron Technology, Al. Lotnikow 46, 02-668 Warsaw (Poland)

2012-08-13T23:59:59.000Z

82

Current environmental, health, safety, and socioeconomic research activities related to oil shale: draft  

SciTech Connect

This document was prepared for DOE Resource Applications. It provides a compilation of information on current environmental, health, safety and socioeconomic research activities related to oil shale. The information is the most recent available through August 29, 1980. Included are the following: (1) project title; (2) adminstering agency; (3) contractor; (4) project status; (5) funding level; (6) project schedule; (7) deliverable; and (8) key personnel. The data contained in these reports can be used in environmental impact analyses relating oil shale to various incentives given in the Alternative Fuels Bill. The information provided was obtained from computer search printouts, review of respective agency documents and communication with agency personnel. A complete list of references is provided. The sponsoring organizations include the Department of Energy, the Environmental Protection Agency, the Department of Agriculture, and the Department of Interior.

1980-09-01T23:59:59.000Z

83

Integrated modeling and design of lightweight, active mirrors for launch survival and on-orbit performance  

E-Print Network (OSTI)

Lightweight, active mirrors are an enabling technology for large aperture, space-based optical systems. These mirrors have the potential to improve the optical resolution and sensitivity beyond what is currently possible. ...

Cohan, Lucy Elizabeth

2010-01-01T23:59:59.000Z

84

Molecular mechanisms integrating genetic and calcium activity-dependent neurotransmitter specification  

E-Print Network (OSTI)

adhesion molecule vii NFAT NF-kB NFY Ngn1/2 NMDA NT p-cJuncontrast, activation of the NF-kB transcription factor by Ca

Kurtz, Lisa Miriam

2010-01-01T23:59:59.000Z

85

Integration of Locational Decisions with the Household Activity Pattern Problem and Its Applications in Transportation Sustainability  

E-Print Network (OSTI)

activity, R is the battery capacity, r is the charging rate,In the analysis, battery capacity is kept in the unit ofthe full electric battery inventory (capacity) of vehicle of

Kang, Jee Eun

2013-01-01T23:59:59.000Z

86

Making a difference: Ten case studies of DSM/IRP interactive efforts and related advocacy group activities  

Science Conference Proceedings (OSTI)

This report discusses the activities of organizations that seek to promote integrated resource planning and aggressive, cost-effective demand-side management by utilities. The activities of such groups -- here called energy efficiency advocacy groups (EEAGs) -- are examined in ten detailed am studies. Nine of the cases involve some form of interactive effort between investor-owned electric utilities and non-utility to develop policies, plans, or programs cooperatively. Many but not all of the interactive efforts examined are formal collaboratives. In addition, all ten cases include discussion of other EEAG activities, such as coalition-building, research, participation in statewide energy planning, and intervention in regulatory proceedings.

English, M.; Schexnayder, S.; Altman, J. [Tennessee Univ., Knoxville, TN (United States). Energy, Environment and Resources Center; Schweitzer, M. [Oak Ridge National Lab., TN (United States)

1994-03-01T23:59:59.000Z

87

Business activity monitoring system design framework integrated with process-based performance measurement model  

Science Conference Proceedings (OSTI)

Recently, strong interests in the real-time performance management are increasing to gain competitive advantages in the rapidly changing business environment. For better business performance or continuous process improvement of an enterprise, real-time ... Keywords: business activity monitoring (BAM), business performance, business process management (BPM), key performance indicator (KPI)

Kwan Hee Han; Sang Hyun Choi; Jin Gu Kang; Geon Lee

2010-03-01T23:59:59.000Z

88

Presentation to the EAC - NSF Workforce Development Related Activities and Programs - Barbara Kenny  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NSF Workforce Development NSF Workforce Development Related Activities and Programs Barbara Kenny June 11, 2012 NSF Mission and Vision * Mission: From the NSF Act of 1950: ..."To promote the progress of science; to advance the national health, prosperity, and welfare; to secure the national defense...." * Vision: NSF envisions a nation that capitalizes on new concepts in science and engineering and provides global leadership in advancing research and education $B * ARRA ? 5 5.5 6 6.5 7 7.5 8 8.5 9 9.5 2005 2006 2007 2008 2009 2010 2011 2012 2013 Request Actual Fiscal Year NSF Budget Mathematical & Physical Sciences (MPS) Geosciences (GEO) Engineering (ENG) Computer & Information Science & Engineering (CISE) Biological Sciences (BIO) Office of the Inspector General (OIG)

89

Hydrogen Geysers: Explanation for Observed Evidence of Geologically Recent Volatile-Related Activity on Mercury's Surface  

E-Print Network (OSTI)

High resolution images of Mercury's surface, from the MESSENGER spacecraft, reveal many bright deposits associated with irregular, shallow, rimless depressions whose origins were attributed to volatile-related activity, but absent information on the nature and origin of that volatile matter. Here I describe planetary formation, unlike the cited models, and show that primordial condensation from an atmosphere of solar composition at pressures of one atmosphere or above will lead to iron condensing as a liquid and dissolving copious amounts of hydrogen, which is subsequently released as Mercury's core solidifies and escapes from the surface, yielding the observed pit-like features with associated highly-reflecting matter. The exiting hydrogen chemically reduces some iron compound, probably iron sulfide, to the metal, which accounts for the bright deposits.

J. Marvin Herndon

2011-10-20T23:59:59.000Z

90

EVOLUTION OF RELATIVE MAGNETIC HELICITY AND CURRENT HELICITY IN NOAA ACTIVE REGION 11158  

SciTech Connect

Both magnetic and current helicities are crucial ingredients for describing the complexity of active-region magnetic structure. In this Letter, we present the temporal evolution of these helicities contained in NOAA active region 11158 during five days from 2011 February 12 to 16. The photospheric vector magnetograms of the Helioseismic and Magnetic Imager on board the Solar Dynamic Observatory were used as the boundary conditions for the coronal field extrapolation under the assumption of nonlinear force-free field, from which we calculated both relative magnetic helicity and current helicity. We construct a time-altitude diagram in which altitude distribution of the magnitude of current helicity density is displayed as a function of time. This diagram clearly shows a pattern of upwardly propagating current helicity density over two days prior to the X2.2 flare on February 15 with an average propagation speed of {approx}36 m s{sup -1}. The propagation is synchronous with the emergence of magnetic flux into the photosphere, and indicative of a gradual energy buildup for the X2.2 flare. The time profile of the relative magnetic helicity shows a monotonically increasing trend most of the time, but a pattern of increasing and decreasing magnetic helicity above the monotonic variation appears prior to each of two major flares, M6.6 and X2.2, respectively. The physics underlying this bump pattern is not fully understood. However, the fact that this pattern is apparent in the magnetic helicity evolution but not in the magnetic flux evolution makes it a useful indicator in forecasting major flares.

Jing, Ju; Liu, Chang; Lee, Jeongwoo; Xu, Yan; Deng, Na; Wang, Haimin [Space Weather Research Laboratory, New Jersey Institute of Technology, Newark, NJ 07102 (United States); Park, Sung-Hong [Korea Astronomy and Space Science Institute, Daejeon, 305-348 (Korea, Republic of); Wiegelmann, Thomas, E-mail: ju.jing@njit.edu, E-mail: chang.liu@njit.edu, E-mail: yx2@njit.edu, E-mail: na.deng@njit.edu, E-mail: haimin@flare.njit.edu, E-mail: freemler@kasi.re.kr, E-mail: leej@njit.edu, E-mail: wiegelmann@linmpi.mpg.de [Max Planck Institut fuer Sonnensystemforschung (MPS), Max-Planck-Strasse 2, 37191 Katlenburg-Lindau (Germany)

2012-06-10T23:59:59.000Z

91

National Bioenergy Center Biochemical Platform Integration Project: Quarterly Update #16, July-September 2007  

DOE Green Energy (OSTI)

This quarterly update contains information on the National Bioenergy Center Biochemical Platform Integration Project, R&D progress and related activities.

Schell, D.

2007-10-01T23:59:59.000Z

92

Systematic Variation of Summertime Tropical Cyclone Activity in the Western North Pacific in Relation to the Madden朖ulian Oscillation  

Science Conference Proceedings (OSTI)

The variability of observed tropical cyclone (TC) activity (i.e., genesis, track, and landfall) in the western North Pacific (WNP) is examined in relation to the various categories of the Madden朖ulian oscillation (MJO) during summer (June...

Joo-Hong Kim; Chang-Hoi Ho; Hyeong-Seog Kim; Chung-Hsiung Sui; Seon Ki Park

2008-03-01T23:59:59.000Z

93

Forced, Dissipative Generalizations of Finite-Amplitude Wave-Activity Conservation Relations for Zonal and Nonzonal Basic Flows  

Science Conference Proceedings (OSTI)

The effects of forcing and dissipation are incorporated into finite amplitude, local wave-activity relations for disturbances to zonal and nonzonal flows. The method used is an extension of the momentum朇asimir and energy朇asimir methods that ...

Peter H. Haynes

1988-08-01T23:59:59.000Z

94

Activities of the National Academy of Sciences in relation to the Radiation Effects Research Foundation  

Science Conference Proceedings (OSTI)

The activities of the National Academy of Sciences (NAS), in relation to the Radiation Effects Research Foundation (RERF), has a long history and the specific time period supported by this contract is but a small piece of the long-term continuing program. As a background, in August 1945, atomic bombs were dropped on Hiroshima (6 August) and Nagasaki (9 August). Shortly after the bombings, US medical teams joined forces with their Japanese counterparts to form a Joint Commission for the Investigation of the Effects of the Atomic Bombs. As a result of the Joint Commission's investigations, it was determined that consideration should be given to the establishment of a long-term study of the potential late health effects of exposure of the survivors to radiation from the bombs. The results obtained from RERF studies contribute the vast majority of information that provides a better understanding of radiation effects on humans. This information has been used extensively by national organizations and international committees for estimating risks associated with radiation exposures. The estimated risks developed by these independent organizations are used by government agencies around the world to establish standards for protection of individuals exposed in the occupational, medical, and general environment. Some of these results are described briefly in this report.

Edington, C.W.

1991-02-01T23:59:59.000Z

95

Major electron events and coronal magnetic configurations of the related solar active regions  

E-Print Network (OSTI)

A statistical survey of 26 major electron events during the period 2002 February through the end of solar cycle 23 is presented. We have obtained electron solar onset times and the peak flux spectra for each event by fitting to a powerlaw spectrum truncated by an exponential high-energy tail. We also derived the coronal magnetic configurations of the related solar active regions (ARs) from the potential-field source-surface model. It is found that (1) 10 of the 11 well-connected open field-line events are prompt events whose solar onset times coincide with the maxima of flare emission and 13 of the 14 closed field-line events are delayed events. (2) A not-wellconnected open field-line event and one of the closed field-line events are prompt events, they are both associated with large-scale coronal disturbances or dimming. (3)An averaged harder spectrum is found in open field-line events compared with the closed ones. Specifically, the averaged spectral index is of 1.6 +/- 0.3 in open field-line events and of ...

Li, C; Matthews, S A; Dai, Y; Tang, Y H

2013-01-01T23:59:59.000Z

96

Development of a CO2 Sequestration Module by Integrating Mineral Activation and Aqueous Carbonation  

Science Conference Proceedings (OSTI)

Mineral carbonation is a promising concept for permanent CO{sub 2} sequestration due to the vast natural abundance of the raw materials and the permanent storage of CO{sub 2} in solid form as carbonates. The sequestration of CO{sub 2} through the employment of magnesium silicates--olivine and serpentine--is beyond the proof of concept stage. For the work done in this project, serpentine was chosen as the feedstock mineral due to its abundance and availability. Although the reactivity of olivine is greater than that of serpentine, physical and chemical treatments have been shown to increase greatly the reactivity of serpentine. The primary drawback to mineral carbonation is reaction kinetics. To accelerate the carbonation, aqueous processes are preferred, where the minerals are first dissolved in solution. In aqueous carbonation, the key step is the dissolution rate of the mineral, where the mineral dissolution reaction is likely to be surface-controlled. The relatively low reactivity of serpentine has warranted research into physical and chemical treatments that have been shown to greatly increase its reactivity. The use of sulfuric acid as an accelerating medium for the removal of magnesium from serpentine has been investigated. To accelerate the dissolution process, the mineral can be ground to very fine particle size, 185 C, >13 MPa, and control on the dissolution via the removal of water, which is closely correlated with the extraction of magnesium from serpentine. Single-variable experimentation demonstrated dissolution enhancements with increased reaction time and temperature. An increase in magnesium dissolution of 46% and 70%, relative to a baseline test, occurred for increased reaction time and temperature, respectively. In addition to the challenges presented by the dissolution of serpentine, another challenge is the subsequent carbonation of the magnesium ions. A stable hydration sphere for the magnesium ion reduces the carbonation kinetics by obstructing the formation of the carbonation products. Accordingly, this research has evaluated the solubility of carbon dioxide in aqueous solution, the interaction between the dissociation products of carbon dioxide, and the carbonation potential of the magnesium ion.

George Alexander; Parvana Aksoy; John Andresen; Mercedes Maroto-Valer; Harold Schobert

2006-08-14T23:59:59.000Z

97

DOE standard: Integration of environment, safety, and health into facility disposition activities. Volume 2: Appendices  

SciTech Connect

This volume contains the appendices that provide additional environment, safety, and health (ES and H) information to complement Volume 1 of this Standard. Appendix A provides a set of candidate DOE ES and H directives and external regulations, organized by hazard types that may be used to identify potentially applicable directives to a specific facility disposition activity. Appendix B offers examples and lessons learned that illustrate implementation of ES and H approaches discussed in Section 3 of Volume 1. Appendix C contains ISMS performance expectations to guide a project team in developing and implementing an effective ISMS and in developing specific performance criteria for use in facility disposition. Appendix D provides guidance for identifying potential Applicable or Relevant and Appropriate Requirements (ARARs) when decommissioning facilities fall under the Comprehensive Environmental Response, Compensation, Liability Act (CERCLA) process. Appendix E discusses ES and H considerations for dispositioning facilities by privatization. Appendix F is an overview of the WSS process. Appendix G provides a copy of two DOE Office of Nuclear Safety Policy and Standards memoranda that form the bases for some of the guidance discussed within the Standard. Appendix H gives information on available hazard analysis techniques and references. Appendix I provides a supplemental discussion to Sections 3.3.4, Hazard Baseline Documentation, and 3.3.6, Environmental Permits. Appendix J presents a sample readiness evaluation checklist.

NONE

1998-05-01T23:59:59.000Z

98

Phase Preference by Active, Acetate-Utilizing Bacteria at the Rifle, CO Integrated Field Research Challenge Site  

SciTech Connect

Previous experiments at the Rifle, Colorado Integrated Field Research Challenge (IFRC) site demonstrated that field-scale addition of acetate to groundwater reduced the ambient soluble uranium concentration. In this report, sediment samples collected before and after acetate field addition were used to assess the active microbes via {sup 13}C acetate stable isotope probing on 3 phases [coarse sand, fines (8-approximately 150 {micro}m), groundwater (0.2-8 {micro}m)] over a 24-day time frame. TRFLP results generally indicated a stronger signal in {sup 13}C-DNA in the 'fines' fraction compared to the sand and groundwater. Before the field-scale acetate addition, a Geobacter-like group primarily synthesized {sup 13}C-DNA in the groundwater phase, an alpha Proteobacterium primarily grew on the fines/sands, and an Acinetobacter sp. and Decholoromonas-like OTU utilized much of the {sup 13}C acetate in both groundwater and particle-associated phases. At the termination of the field-scale acetate addition, the Geobacter-like species was active on the solid phases rather than the groundwater, while the other bacterial groups had very reduced newly synthesized DNA signal. These findings will help to delineate the acetate utilization patterns of bacteria in the field and can lead to improved methods for stimulating distinct microbial populations in situ.

Kerkhof, L.; Williams, K.H.; Long, P.E.; McGuinness, L.

2011-02-21T23:59:59.000Z

99

Melatonin Alters Age-Related Changes in Transcription Factors and Kinase Activation  

E-Print Network (OSTI)

not to alter the extent of NF-kB or AP-1 activation [14]. X-in the spleen, dietary a NF-kB activity (densitometic units)YC YM OC OM b NF-kB activity (densitometic units) Results

Bondy, Stephen Bondy C

2010-01-01T23:59:59.000Z

100

Field Test and Performance Verification: Integrated Active Desiccant Rooftop Hybrid System Installed in a School - Final Report: Phase 4A  

SciTech Connect

This report summarizes the results of a field verification pilot site investigation that involved the installation of a hybrid integrated active desiccant/vapor-compression rooftop heating, ventilation, and air-conditioning (HVAC) unit at an elementary school in the Atlanta Georgia area. For years, the school had experienced serious humidity and indoor air quality (IAQ) problems that had resulted in occupant complaints and microbial (mold) remediation. The outdoor air louvers of the original HVAC units had been closed in an attempt to improve humidity control within the space. The existing vapor compression variable air volume system was replaced by the integrated active desiccant rooftop (IADR) system that was described in detail in an Oak Ridge National Laboratory (ORNL) report published in 2004 (Fischer and Sand 2004). The IADR system and all space conditions have been monitored remotely for more than a year. The hybrid system was able to maintain both the space temperature and humidity as desired while delivering the outdoor air ventilation rate required by American Society of Heating, Refrigerating and Air-Conditioning Engineers Standard 62. The performance level of the IADR unit and the overall system energy efficiency was measured and found to be very high. A comprehensive IAQ investigation was completed by the Georgia Tech Research Institute before and after the system retrofit. Before-and-after data resulting from this investigation confirmed a significant improvement in IAQ, humidity control, and occupant comfort. These observations were reported by building occupants and are echoed in a letter to ORNL from the school district energy manager. The IADR system was easily retrofitted in place of the original rooftop system using a custom curb adapter. All work was completed in-house by the school's maintenance staff over one weekend. A subsequent cost analysis completed for the school district by the design engineer of record concluded that the IADR system being investigated was actually less expensive to install than other less-efficient options, most of which were unable to deliver the required ventilation while maintaining the desired space humidity levels.

Fischer, J

2005-12-21T23:59:59.000Z

Note: This page contains sample records for the topic "integration activities related" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

3-D nonlinear force-free field reconstruction of solar active region 11158 by direct boundary integral equation  

E-Print Network (OSTI)

A 3-D coronal magnetic field is reconstructed for NOAA 11158 on Feb 14, 2011. A GPU-accelerated direct boundary integral equation (DBIE) method is implemented. This is about 1000 times faster than the original DBIE used on solar NLFFF modeling. Using the SDO/HMI vector magnetogram as the bottom boundary condition, the reconstructed magnetic field lines are compared with the projected EUV loop structures from different views three-dimensionally by SDO/AIA and STEREO A/B spacecraft simultaneously for the first time. They show very good agreement so that the topological configurations of the magnetic fields can be analyzed, thus its role in the flare process of the active region can be better understood. A quantitative comparison with some stereoscopically reconstructed coronal loops shows that the present averaged misalignment angles are at the same order as the state-of-the-art results obtained with reconstructed coronal loops as prescribed conditions and better than other NLFFF methods. It is found that the o...

Wang, Rui; Tan, Baolin

2013-01-01T23:59:59.000Z

102

Integration of Nevada Test Site (NTS) Work Control Programs and Incorporating Integrated Safety Management (ISM) into Activity Level Work Planning and Control  

SciTech Connect

This session will examine a method developed by Federal and Contractor personnel at the Nevada Site Office (NSO) to improve the planning and execution of work activities utilizing an Activity Level Work Control process in response to Defense Nuclear Facilities Safety Board (DNFSB) Recommendation 2004-1, Oversight of Complex, High-Hazard Nuclear Operations. The process was initially developed during Fiscal Year (FY) 2007, and implementation is commencing during the fourth quarter of FY 2008. This process will significantly enhance the flexibility and the appropriate rigor in the performance of work activities.

Mike Kinney and Kevin Breen

2008-08-30T23:59:59.000Z

103

Relation Between the Adsorbed Quantity and the Immersion Enthalpy in Catechol Aqueous Solutions on Activated Carbons  

E-Print Network (OSTI)

Abstract: An activated carbon, Carbochem TM 桺S230, was modified by chemical and thermal treatment in flow of H2, in order to evaluate the influence of the activated carbon chemical characteristics in the adsorption of the catechol. The catechol adsorption in aqueous solution was studied along with the effect of the pH solution in the adsorption process of modified activated carbons and the variation of immersion enthalpy of activated carbons in the aqueous solutions of catechol. The interaction solid-solution is characterized by adsorption isotherms analysis, at 298 K and pH 7, 9 and 11 in order to evaluate the adsorption value above and below that of the catechol pKa. The adsorption capacity of carbons increases when the solution pH decreases. The retained amount increases slightly in the reduced carbon to maximum adsorption pH and diminishes in the oxidized carbon. Similar conclusions are obtained from the immersion enthalpies, whose values increase with the solute quantity retained. In granular activated carbon (CAG), the immersion enthalpies obtained are between 21.5 and 45.7 J穏 ?1 for catechol aqueous solutions in a range of 20 at 1500 mg稬 ?1.

Juan Carlos Moreno-piraj醤; Diego Blanco; Liliana Giraldo

2011-01-01T23:59:59.000Z

104

Threatened and endangered wildlife species of the Hanford Site related to CERCLA characterization activities  

SciTech Connect

The US Department of Energy`s (DOE) Hanford Site has been placed on the National Priorities List, which requires that it be remediated under the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) or Superfund. Potentially contaminated areas of the Hanford Site were grouped into operable units, and detailed characterization and investigation plans were formulated. The DOE Richland Operations Office requested Westinghouse Hanford Company (WHC) to conduct a biological assessment of the potential impact of these characterization activities on the threatened, endangered, and sensitive wildlife species of the Hanford Site. Additional direction for WHC compliances with wildlife protection can be found in the Environmental Compliance Manual. This document is intended to meet these requirements, in part, for the CERCLA characterization activities, as well as for other work comparable in scope. This report documents the biological assessment and describes the pertinent components of the Hanford Site as well as the planned characterization activities. Also provided are accounts of endangered, threatened, and federal candidate wildlife species on the Hanford Site and information as to how human disturbances can affect these species. Potential effects of the characterization activities are described with recommendations for mitigation measures.

Fitzner, R.E. [Pacific Northwest Lab., Richland, WA (United States); Weiss, S.G.; Stegen, J.A. [Westinghouse Hanford Co., Richland, WA (United States)

1994-06-01T23:59:59.000Z

105

Large grain Ge growth on amorphous substrates for CMOS back-end-of-line integration of active optoelectronic devices  

E-Print Network (OSTI)

The electronic-photonic integrated circuit (EPIC) has emerged as a leading technology to surpass the interconnect bottlenecks that threaten to limit the progress of Moore's Law in microprocessors. Compared to conventional ...

Pearson, Brian (Brian Sung-Il)

2012-01-01T23:59:59.000Z

106

Annual report to Congress. Department of Energy activities relating to the Defense Nuclear Facilities Safety Board, calendar year 2000  

Science Conference Proceedings (OSTI)

This Annual Report to the Congress describes the Department of Energy's activities in response to formal recommendations and other interactions with the Defense Nuclear Facilities Safety Board. During 2000, the Department completed its implementation and proposed closure of one Board recommendation and completed all implementation plan milestones associated with two additional Board recommendations. Also in 2000, the Department formally accepted two new Board recommendations and developed implementation plans in response to those recommendations. The Department also made significant progress with a number of broad-based safety initiatives. These include initial implementation of integrated safety management at field sites and within headquarters program offices, issuance of a nuclear safety rule, and continued progress on stabilizing excess nuclear materials to achieve significant risk reduction.

None

2001-03-01T23:59:59.000Z

107

Enhanced photo-activated luminescence for screening polychlorobiphenyls (PCBs) and other related chlorinated compounds  

DOE Patents (OSTI)

The presence of polychlorinated biphenyls and other chlorinated compounds in a sample is determined by treating the sample with a photo-activator and then exposing the treated sample to a UV light source. The UV light produces a photo-product complex, which is subsequently excited with UV light to cause luminescence of the complex. The luminescence is detected and characteristics of the luminescence spectra are used to determine the presence of chlorinated compounds and also the quantity of the chlorine in the compounds.

Vo-Dinh, Tuan (Knoxville, TN)

1993-01-01T23:59:59.000Z

108

Enhanced photo-activated luminescence for screening polychlorobiphenyls (PCBs) and other related chlorinated compounds  

DOE Patents (OSTI)

The presence of polychlorinated biphenyls and other chlorinated compounds in a sample is determined by treating the sample with a photo-activator and then exposing the treated sample to a UV light source. The UV light produces a photo-product complex, which is subsequently excited with UV light to cause luminescence of the complex. The luminescence is detected and characteristics of the luminescence spectra are used to determine the presence of chlorinated compounds and also the quantity of the chlorine in the compounds

Vo-Dinh, Tuan (Knoxville, TN)

1994-01-01T23:59:59.000Z

109

Enhanced photo-activated luminescence for screening polychlorobiphenyls (PCBs) and other related chlorinated compounds  

DOE Patents (OSTI)

The presence of polychlorinated biphenyls and other chlorinated compounds in a sample is determined by treating the sample with a photo-activator and then exposing the treated sample to a UV light source. The UV light produces a photo-product complex, which is subsequently excited with UV light to cause luminescence of the complex. The luminescence is detected and characteristics of the luminescence spectra are used to determine the presence of chlorinated compounds and also the quantity of the chlorine in the compounds. 14 figures.

Tuan Vodinh.

1993-12-21T23:59:59.000Z

110

Enhanced photo-activated luminescence for screening polychlorobiphenyls (PCBs) and other related chlorinated compounds  

DOE Patents (OSTI)

The presence of polychlorinated biphenyls and other chlorinated compounds in a sample is determined by treating the sample with a photo-activator and then exposing the treated sample to a UV light source. The UV light produces a photo-product complex, which is subsequently excited with UV light to cause luminescence of the complex. The luminescence is detected and characteristics of the luminescence spectra are used to determine the presence of chlorinated compounds and also the quantity of the chlorine in the compounds. 14 figs.

Vo-Dinh, T.

1994-06-07T23:59:59.000Z

111

MAS 10.1 Implementation of the Integrated Safety Management System (ISMS) Process in Maintenance Activities, 2/14/2000  

Energy.gov (U.S. Department of Energy (DOE))

The objective of this surveillance is to evaluate the effectiveness of the contractor's ISMS process with regard to maintenance activities. Surveillance activities encompass work planning and...

112

Federal agencies active in chemical industry-related research and development  

SciTech Connect

The Energy Policy Act of 1992 calls for a program to further the commercialization of renewable energy and energy efficient technologies for the industrial sector.. The primary objective of the Office of Industrial Technologies Chemical Industry Team is to work in partnership with the US chemical industry to maximize economic, energy, and environmental benefits through research and development of innovative technologies. This document was developed to inventory organizations within the federal government on current chemical industry-related research and development. While an amount of funding or number of projects specifically relating to chemical industry research and development was not defined in all organizations, identified were about 60 distinct organizations representing 7 cabinet-level departments and 4 independent agencies, with research efforts exceeding $3.5 billion in fiscal year 1995. Effort were found to range from less than $500 thousand per year at the Departments of Agriculture and the Interior to over $100 million per year at the Departments of Commerce, Defense, Energy, and Health and Human Services and the National Aeronautics and Space Administration. The total number of projects in these programs exceeded 10,000. This document is complete to the extent that agencies volunteered information. Additions, corrections, and changes are encouraged and will be incorporated in future revisions.

1995-09-29T23:59:59.000Z

113

Overview of Activities in U.S. Related to Continued Service of Nuclear Power Plant Concrete Structures  

SciTech Connect

Safety-related nuclear power plant concrete structures are described and commentary on continued service assessments of these structures is provided. In-service inspection and testing requirements in the U.S. are summarized. The license renewal process in the U.S. is outlined and its current status noted. A summary of operating experience related to U.S. nuclear power plant concrete structures is presented. Several candidate areas are identified where additional research would be of benefit to aging management of NPP concrete structures. Finally current ORNL activities related to aging-management of concrete structures are outlined: development of operating experience database, application of structural reliability theory, and compilation of elevated temperature concrete material property data and information.

Naus, Dan J [ORNL

2011-01-01T23:59:59.000Z

114

Activities in Support of Continuing the Service of Nuclear Power Plant Safety-Related Concrete Structures  

SciTech Connect

Nuclear power plant (NPP) concrete structures are described. In-service inspection and testing requirements in the U.S. are summarized. The license renewal process in the U.S. is outlined and its current status provided. Operating experience related to performance of the concrete structures is presented. Basic components of a program to manage aging of the concrete structures are identified and described: (1) Degradation mechanisms, damage models, and material performance; (2) Assessment and remediation: i.e., component selection, in- service inspection, non-destructive examinations, and remedial actions; and (3) Estimation of performance at present or some future point in time: i.e., application of structural reliability theory to the design and optimization of in-service inspection/maintenance strategies, and determination of the effects of degradation on plant risk. Finally, areas are noted where additional research would be of benefit to aging management of nuclear power plant concrete structures.

Naus, Dan J [ORNL

2014-01-01T23:59:59.000Z

115

Activities in Support of Continuing the Service of Nuclear Power Plant Safety-Related Concrete Structures  

SciTech Connect

Nuclear power plant concrete structures are described. In-service inspection and testing requirements in the U.S. are summarized. The license renewal process in the U.S. is outlined and its current status provided. Operating experience related to performance of the concrete structures is presented. Basic components of a program to manage aging of the concrete structures are identified and described: degradation mechanisms, damage models, and material performance; assessment and remediation (i.e., component selection, in-service inspection, non-destructive examinations, and remedial actions); and estimation of performance at present or some future point in time (i.e., application of structural reliability theory to the design and optimization of in-service inspection/maintenance strategies, and determination of the effects of degradation on plant risk). Finally, areas are noted where additional research would be of benefit to aging management of nuclear power plant concrete structures.

Naus, Dan J [ORNL

2010-01-01T23:59:59.000Z

116

Lead Research and Development Activity for DOE's High Temperature, Low Relative Humidity Membrane Program (Topic 2)  

SciTech Connect

The Department of Energy抯 High Temperature, Low Relative Humidity Membrane Program was begun in 2006 with the Florida Solar Energy Center (FSEC) as the lead organization. During the first three years of the program, FSEC was tasked with developing non-Nafion proton exchange membranes with improved conductivity for fuel cells. Additionally, FSEC was responsible for developing protocols for the measurement of in-plane conductivity, providing conductivity measurements for the other funded teams, developing a method for through-plane conductivity and organizing and holding semiannual meetings of the High Temperature Membrane Working Group (HTMWG). The FSEC membrane research focused on the development of supported poly[perfluorosulfonic acid] (PFSA) Teflon membranes and a hydrocarbon membrane, sulfonated poly(ether ether ketone). The fourth generation of the PFSA membrane (designated FSEC-4) came close to, but did not meet, the Go/No-Go milestone of 0.1 S/cm at 50% relative humidity at 120 癈. In-plane conductivity of membranes provided by the funded teams was measured and reported to the teams and DOE. Late in the third year of the program, DOE used this data and other factors to decide upon the teams to continue in the program. The teams that continued provided promising membranes to FSEC for development of membrane electrode assemblies (MEAs) that could be tested in an operating fuel cell. FSEC worked closely with each team to provide customized support. A logic flow chart was developed and discussed before MEA fabrication or any testing began. Of the five teams supported, by the end of the project, membranes from two of the teams were easily manufactured into MEAs and successfully characterized for performance. One of these teams exceeded performance targets, while the other requires further optimization. An additional team developed a membrane that shows great promise for significantly reducing membrane costs and increasing membrane lifetime.

James Fenton, PhD; Darlene Slattery, PhD; Nahid Mohajeri, PhD

2012-09-05T23:59:59.000Z

117

Activities of the National Academy of Sciences in relation to the Radiation Effects Research Foundation  

SciTech Connect

This progress report relates progress in the various research projects evaluating the late health effects, both somatic and genetic, resulting from radiation exposure of the survivors of the atomic bombs at Hiroshima and Nagasaki, Japan. Considerable progress has been made in the collection and utilization of the various epidemiological data bases. These include the Life Span Study, (LSS) cohort, the Adult Health Study (AHS) cohort, the In Utero cohort, the leukemia registry and the F-1 Study population. Important progress has been made in using RERF Tumor and Tissue Registry records for evaluation of cancer incidence and radiation risk estimates for comparison with cancer mortality and risk in the LSS cohort. At the present time, a manuscript on the incidence of solid tumors (1950-1987) is undergoing internal and external review for publication as an RERF Technical report (TR) and for publication in a peer-reviewed scientific journal. In addition, manuscripts are in preparation on (1) a comprehensive report on the incidence of hematological cancers, including analysis of leukemia by cell type (1950-1987), (2) a general description of Tumor Registry operations and (3) a comparison of incidence- and mortality-based estimates of radiation risk in the LSS cohort.

Edington, C.W.

1992-06-01T23:59:59.000Z

118

Silvicultural Activities in Relation to Water Quality in Texas: An Assesment of Potential Problems and Solutions  

E-Print Network (OSTI)

Southern forests are expected to supply a large portion of the Nation's future timber requirement. Projected demands on southern forests continue to exceed allowable cut. As an outgrowth of this demand, intensive management of pine forests enabled the South to produce 45 percent of the Nation's timber harvest in 1970 (USDA, Forest Service, 1973). The Southern Forest Resource Analysis Committee (1969) stated that, if projected timber needs of the year 2000 are to be met, at least ten million acres of bare or poorly stocked land must be planted with pine by 1985 and another twenty million acres converted from low-grade hardwoods to pine. The challenge facing forestry in the South is how to meet this increased demand and maintain an acceptable forest environment in the face of increased taxes, rising labor and equipment costs and predicted petroleum shortages. Undisturbed forests are generally recognized as primary sources of high quality water. Although the Federal Water Pollution Control Act Amendments of 1972 (Public Law No. 92-500) make pollution from forest practices increasingly more important, the effects of these practices on water quality are not known for East Texas. The quality of streamflow from forested watersheds fluctuates constantly in response to natural stress, and can be influenced greatly by man's activities. Forest management practices can potentially influence the following water quality parameters: (1) sediment, (2) nutrients, (3) temperature, (4) dissolved oxygen/organic matter, and (5) introduced chemicals. It must be realized from the onset that sediment due to geologic erosion is a natural component of fresh water streams and that high concentrations may have occurred naturally for short periods due to perturbations in the ecosystem such as wildfires. Sediment is not necessarily a pollutant and only becomes one when it can be demonstrated that it is exceeding natural levels and is interfering with the beneficial use of water. A certain amount of sediment and nutrients are needed in Gulf Bays and Estuaries to maintain their productivity (Mathewson and Minter, 1976; Diener, 1964; Ketchum, 1967). Texas does not have a stream water quality standard for sediment and due to the complexities involved will probably not develop one. Thus, sediment as used in this report, becomes important: (1) as a carrier of plant nutrients and forest chemicals, and (2) in that practices which reduce sediment loss will usually reduce nutrient, organic matter and introduced chemical losses and prevent water temperature increases, as well. This report is the result of an interagency contract between Texas Department of Water Resources, Texas Agricultural Experiment Station and Texas Water Resources Institute to: (1) develop an overview of commercial forests and forestry operations in Texas, (2) identify, describe and characterize control strategies for nonpoint sources of pollution from silvicultural activities, and (3) develop and demonstrate a methodology for selecting control strategies in given problem situations. The following topics are covered: (1) an overview of forestry in East Texas, (2) silvicultural practices and nonpoint sources of pollution, (3) control strategies, (4) methodology for the selection of control strategies, (5) institutional aspects of controlling silvicultural nonpoint source pollution, (6) ongoing research and research needs, and (7) hydrology of East Texas. It is important to recognize that this report does not specify that nonpoint pollution from forestlands in East Texas is a problem. Likewise, the report does not set pollution control goals or criteria that should be met by a control plan, since this is the responsibility of the State. In areas where a potential nonpoint pollution problem exists; the suggested control strategies should be useful in selecting control measures that are appropriate to the special conditions imposed by differences in climate, soil, topography, and forest practice.

Blackburn, W. H.; Hickman, C. A.; deSteiguer, J. E.; Jackson, B. D.; Blume, T. A.; DeHaven, M. G.

1978-02-01T23:59:59.000Z

119

Field Demonstration of Active Desiccant Modules Designed to Integrate with Standard Unitary Rooftop Package Equipment - Final Report: Phase 3  

SciTech Connect

This report summarizes the investigation of two active desiccant module (ADM) pilot site installations initiated in 2001. Both pilot installations were retrofits at existing facilities served by conventional heating, ventilating, and air-conditioning (HVAC) systems that had encountered frequent humidity control, indoor air quality (IAQ), and other operational problems. Each installation involved combining a SEMCO, Inc., ADM (as described in Fischer and Sand 2002) with a standard packaged rooftop unit built by the Trane Company. A direct digital control (DDC) system integral to the ADM performed the dual function of controlling the ADM/rooftop combination and facilitating data collection, trending, and remote performance monitoring. The first installation involved providing preconditioned outdoor air to replace air exhausted from the large kitchen hood and bathrooms of a Hooters restaurant located in Rome, Georgia. This facility had previously added an additional rooftop unit in an attempt to achieve occupant comfort without success. The second involved conditioning the outdoor air delivered to each room of a wing of the Mountain Creek Inn at the Callaway Gardens resort. This hotel, designed in the ''motor lodge'' format with each room opening to the outdoors, is located in southwest Georgia. Controlling the space humidity always presented a serious challenge. Uncomfortable conditions and musty odors had caused many guests to request to move to other areas within the resort. This is the first field demonstration performed by Oak Ridge National Laboratory where significant energy savings, operating cost savings, and dramatically improved indoor environmental conditions can all be claimed as the results of a retrofit desiccant equipment field installation. The ADM/rooftop combination installed at the restaurant resulted in a reduction of about 34% in the electricity used by the building's air-conditioning system. This represents a reduction of approximately 15% in overall electrical energy consumption and a 12.5-kW reduction in peak demand. The cost of gas used for regeneration of the desiccant wheel over this period of time is estimated to be only $740, using a gas cost of $0.50 per therm--the summer rate in 2001. The estimated net savings is $5400 annually, resulting in a 1-2 year payback. It is likely that similar energy/cost savings were realized at the Callaway Gardens hotel. In this installation, however, a central plant supplied the chilled water serving fan coil units in the hotel wing retrofitted with the ADM, so it was not metered separately. Consequently, the owner could not provide actual energy consumption data specific to the facility. The energy and operating cost savings at both sites are directly attributable to higher cooling-season thermostat settings and decreased conventional system run times. These field installations were selected as an immediate and appropriate response to correct indoor humidity and fresh air ventilation problems being experienced by building occupants and owners, so no rigorous baseline-building vs. test-building energy use/operating cost savings results can be presented. The report presents several simulated comparisons between the ADM/roof HVAC approach and other equipment combinations, where both desiccant and conventional systems are modeled to provide comparable fresh air ventilation rates and indoor humidity levels. The results obtained from these simulations demonstrate convincingly the energy and operating cost savings obtainable with this hybrid desiccant/vapor-compression technology, verifying those actually seen at the pilot installations. The ADM approach is less expensive than conventional alternatives providing similar performance and indoor air quality and provides a very favorable payback (1 year or so) compared with oversized rooftop units that cannot be operated effectively with the necessary high outdoor air percentages.

Fischer, J

2004-03-15T23:59:59.000Z

120

Alpha spectrometric characterization of process-related particle size distributions from active particle sampling at the Los Alamos National Laboratory uranium foundry  

SciTech Connect

Uranium particles within the respirable size range pose a significant hazard to the health and safety of workers. Significant differences in the deposition and incorporation patterns of aerosols within the respirable range can be identified and integrated into sophisticated health physics models. Data characterizing the uranium particle size distribution resulting from specific foundry-related processes are needed. Using personal air sampling cascade impactors, particles collected from several foundry processes were sorted by activity median aerodynamic diameter onto various Marple substrates. After an initial gravimetric assessment of each impactor stage, the substrates were analyzed by alpha spectrometry to determine the uranium content of each stage. Alpha spectrometry provides rapid nondestructive isotopic data that can distinguish process uranium from natural sources and the degree of uranium contribution to the total accumulated particle load. In addition, the particle size bins utilized by the impactors provide adequate resolution to determine if a process particle size distribution is: lognormal, bimodal, or trimodal. Data on process uranium particle size values and distributions facilitate the development of more sophisticated and accurate models for internal dosimetry, resulting in an improved understanding of foundry worker health and safety.

Plionis, Alexander A [Los Alamos National Laboratory; Peterson, Dominic S [Los Alamos National Laboratory; Tandon, Lav [Los Alamos National Laboratory; Lamont, Stephen P [Los Alamos National Laboratory

2009-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "integration activities related" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Integrated System  

NLE Websites -- All DOE Office Websites (Extended Search)

Integrated Window System Our research activities in the field of high performance windows have led us to conclude that even by using high performance insulating glass units, low conductivity frames, and warm edge spacers, there are still untapped sources for improving energy efficiency in the design and use of residential windows. While such high performance windows are a dramatic improvement over conventional units, they do not reduce conductive losses through wall framing around the window, offer guarantees against excessive wall/window infiltration nor do they adapt to the daily and seasonal potentials for night insulation and summer shading. To meet this need, we have been working on the design, development, and prototyping of Integrated Window Systems (IWS) since 1993. Integrated Window Systems are a form of panelized construction where the wall panel includes an operable or fixed window sash, recessed night insulation, integral solar shading, and is built in a factory setting in order to minimize thermal short circuits and infiltration at joints. IWSs can be built in modular lengths to facilitate their installation with conventional wood frame stick construction or other forms of panelized construction.

122

National Bioenergy Center Biochemical Platform Integration Project  

DOE Green Energy (OSTI)

April through June 2008 update on activities of the National Bioenergy Center's Biochemical Platform Integration Project.

Not Available

2008-07-01T23:59:59.000Z

123

Energy Systems Integration | OpenEI Community  

Open Energy Info (EERE)

Energy Systems Integration Energy Systems Integration Home > Groups Content Group Activity By term Q & A Feeds Share your own status updates, and follow the updates & activities of others by creating your own account. Or, remember to log in If you already have an account. Groups Menu You must login in order to post into this group. Recent content OpenEI maintenance March 8-9, 2013 Research topics related to ESI Prospects for Nuclear Power(Davis 2012) A Framework for the Optimization of Integrated Energy Systems(Jain and Alleyne 2012) Energy System Integration(Smith 2001) more Group members (8) Managers: Aaronbeach Recent members: Jim mcveigh Derekhogue Ads15 Marklane Qinsun Wisconsin Weatherall Windows Payne 429 Throttled (bot load) Error 429 Throttled (bot load) Throttled (bot load) Guru Meditation:

124

Epigenetic Effects on Integration of Limb Lengths in a Mouse Model: Selective Breeding for High Voluntary Locomotor Activity  

E-Print Network (OSTI)

Physiology, 65, 12311237. Herring, S. W. , Decker, J. D. ,doi:10.1002/ar.10049. Herring, S. W. , & Teng, S. (2000).relate to strains on bone (Herring and Teng 2000), and that

Young, Nathan M.; Hallgr韒sson, Benedikt; Garland, Theodore

2009-01-01T23:59:59.000Z

125

Laboratory Testing of Bulk Vitrified Low-Activity Waste Forms to Support the 2005 Integrated Disposal Facility Performance Assessment  

Science Conference Proceedings (OSTI)

The purpose of this report is to document the results from laboratory testing of the bulk vitri-fied (BV) waste form that was conducted in support of the 2005 integrated disposal facility (IDF) performance assessment (PA). Laboratory testing provides a majority of the key input data re-quired to assess the long-term performance of the BV waste package with the STORM code. Test data from three principal methods, as described by McGrail et al. (2000a; 2003a), are dis-cussed in this testing report including the single-pass flow-through test (SPFT) and product con-sistency test (PCT). Each of these test methods focuses on different aspects of the glass corrosion process. See McGrail et al. (2000a; 2003a) for additional details regarding these test methods and their use in evaluating long-term glass performance. In addition to evaluating the long-term glass performance, this report discusses the results and methods used to provided a recommended best estimate of the soluble fraction of 99Tc that can be leached from the engineer-ing-scale BV waste package. These laboratory tests are part of a continuum of testing that is aimed at improving the performance of the BV waste package.

Pierce, Eric M.; McGrail, B. Peter; Bagaasen, Larry M.; Rodriguez, Elsa A.; Wellman, Dawn M.; Geiszler, Keith N.; Baum, Steven R.; Reed, Lunde R.; Crum, Jarrod V.; Schaef, Herbert T.

2006-06-30T23:59:59.000Z

126

activities  

NLE Websites -- All DOE Office Websites (Extended Search)

Detecting Things We Cannot See: Learning the Concepts of Control and Detecting Things We Cannot See: Learning the Concepts of Control and Variable in an Experiment Submitted by Anita Brook-Dupree, 1996 TRAC teacher at Fermilab, Teacher, Alternative Middle Years School, Philadelphia, PA. Particle physicists at Fermilab in Batavia, Illinois are faced with the problem of detecting the presence of sub-atomic particles they cannot see. During my summer as a TRAC teacher at Fermilab, I tried to think of ways to teach middle school students about things we cannot see. I want to thank my nine-year-old daughter Gia for the idea for the following activity. I was lamenting that I could not come up with ideas of how to relate the work of Fermilab scientists to anything that my students would understand. Then I was reminded by my daughter, that when I brought her to school on the

127

Energy Systems Integration | OpenEI Community  

Open Energy Info (EERE)

Systems Integration Home > Energy Systems Integration > Posts by term Content Group Activity By term Q & A Feeds developer (1) ESI (1) Literature Review (5) Maintenance (1)...

128

Vehicle Technologies Office: Thermal Control and System Integration  

NLE Websites -- All DOE Office Websites (Extended Search)

Thermal Control and System Integration The thermal control and system integration activity focuses on issues such as the integration of motor and power control technologies and the...

129

Distributed Resource Integration Framework  

Science Conference Proceedings (OSTI)

This report defines a framework for assessing current issues and considerations associated with the deployment and operation of distributed resources. The framework is a guide that can assist utility personnel, distributed resource owners, and other stakeholders in planning integration projects and in relating different integration projects to one another. The framework provides a structured organization of the various elements associated with distributed resource integration, including regulatory, busin...

2009-12-23T23:59:59.000Z

130

A Polysilicon Active Matrix Organic Light Emitting Diode Display with Integrated Drivers R.M.A. Dawson, Z. Shen, D.A. Furst, S. Connor, J. Hsu, M.G. Kane, R.G. Stewart, A. Ipri  

E-Print Network (OSTI)

A Polysilicon Active Matrix Organic Light Emitting Diode Display with Integrated Drivers R.S.A. Abstract The design of an active matrix organic light emitting diode (AMOLED) display using a polysilicon. Introduction Organic light emitting diodes (OLEDs) are presently of great interest due to their potential

131

Water Waves and Integrability  

E-Print Network (OSTI)

The Euler's equations describe the motion of inviscid fluid. In the case of shallow water, when a perturbative asymtotic expansion of the Euler's equations is taken (to a certain order of smallness of the scale parameters), relations to certain integrable equations emerge. Some recent results concerning the use of integrable equation in modeling the motion of shallow water waves are reviewed in this contribution.

Rossen I. Ivanov

2007-07-12T23:59:59.000Z

132

Energy Systems Integration | OpenEI Community  

Open Energy Info (EERE)

Groups > Groups > Energy Systems Integration Groups > Groups > Energy Systems Integration Content Group Activity By term Q & A Feeds There are no feeds from external sites for this group. Groups Menu You must login in order to post into this group. Groups Menu You must login in order to post into this group. Group members (8) Managers: Aaronbeach Recent members: Jim mcveigh Derekhogue Ads15 Marklane Qinsun Wisconsin Weatherall Windows Payne Recent content OpenEI maintenance March 8-9, 2013 Research topics related to ESI Prospects for Nuclear Power(Davis 2012) A Framework for the Optimization of Integrated Energy Systems(Jain and Alleyne 2012) Energy System Integration(Smith 2001) more Group members (8) Managers: Aaronbeach Recent members: Jim mcveigh Derekhogue Ads15 Marklane Qinsun Wisconsin Weatherall Windows Payne

133

Active capacitive sensing: exploring a new wearable sensing modality for activity recognition  

Science Conference Proceedings (OSTI)

The paper describes the concept, implementation, and evaluation of a new on-body capacitive sensing approach to derive activity related information. Using conductive textile based electrodes that are easy to integrate in garments, we measure changes ...

Jingyuan Cheng; Oliver Amft; Paul Lukowicz

2010-05-01T23:59:59.000Z

134

CIM Application Integration  

Science Conference Proceedings (OSTI)

The EPRI Common Information Model (CIM) has been used as the basis or schema for implementing a real-time relational database in the CIM Application Integration Project. The CIM relational database is implemented in a normalized form so that it can support a complete range of utility transmission, generation, distribution, substation, and asset management applications. The objective of this document is to provide a final report on the CIM Application Integration Project.

2004-02-02T23:59:59.000Z

135

NREL: News - Related Links  

NLE Websites -- All DOE Office Websites (Extended Search)

Home Feature News News Releases Events Awards Research Support Facility Energy Systems Integration Facility Related Links NREL is a national laboratory of the U.S....

136

Charged particle detectors with active detector surface for partial energy deposition of the charged particles and related methods  

DOE Patents (OSTI)

A radiation detector is disclosed. The radiation detector comprises an active detector surface configured to generate charge carriers in response to charged particles associated with incident radiation. The active detector surface is further configured with a sufficient thickness for a partial energy deposition of the charged particles to occur and permit the charged particles to pass through the active detector surface. The radiation detector further comprises a plurality of voltage leads coupled to the active detector surface. The plurality of voltage leads is configured to couple to a voltage source to generate a voltage drop across the active detector surface and to separate the charge carriers into a plurality of electrons and holes for detection. The active detector surface may comprise one or more graphene layers. Timing data between active detector surfaces may be used to determine energy of the incident radiation. Other apparatuses and methods are disclosed herein.

Gerts, David W; Bean, Robert S; Metcalf, Richard R

2013-02-19T23:59:59.000Z

137

Estimation of Daily Mean Photosynthetically Active Radiation under All-Sky Conditions Based on Relative Sunshine Data  

Science Conference Proceedings (OSTI)

Photosynthetically active radiation (PAR) is absorbed by plants to carry out photosynthesis. Its estimation is important for many applications such as ecological modeling. In this study, a broadband transmittance scheme for solar radiation at the ...

Jun Qin; Kun Yang; Shunlin Liang; Wenjun Tang

2012-01-01T23:59:59.000Z

138

Characteristics of the Atlantic Storm-Track Eddy Activity and Its Relation with the North Atlantic Oscillation  

Science Conference Proceedings (OSTI)

This study focuses on feedbacks of the high-frequency eddy activity onto the quasi-stationary circulation, particularly with regard to the North Atlantic Oscillation (NAO). The methodology consists of analyzing NCEP朜CAR reanalysis data and ...

G. Rivi鑢e; I. Orlanski

2007-02-01T23:59:59.000Z

139

Insolation integrator  

DOE Patents (OSTI)

An electric signal representative of the rate of insolation is integrated to determine if it is adequate for operation of a solar energy collection system.

Dougherty, John J. (Norristown, PA); Rudge, George T. (Lansdale, PA)

1980-01-01T23:59:59.000Z

140

Differences in physical activity and sedentary time in relation to weight in 8-9 year old children.  

E-Print Network (OSTI)

, Burns TL, Torner JC, Willing MC, Warren JJ: Fat- ness, Physical Activity, and Television Viewing in Children during the Adiposity Rebound Period: The Iowa Bone Devel- opment Study. Prev Med 2002, 35:563-571. 12. Rowlands AV, Pilgrim EL, Eston RG...

Purslow, Lisa R; Hill, Claire; Saxton, Jenny; Corder, Kirsten; Wardle, Jane

2008-12-12T23:59:59.000Z

Note: This page contains sample records for the topic "integration activities related" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

A national drilling program to study the roots of active hydrothermal systems related to young magmatic intrusions  

DOE Green Energy (OSTI)

The importance of studies of active hydrothermal-magma systems as part of a national continental scientific drilling program has been emphasized in numerous workshops and symposia. The present report, prepared by the Panel on Thermal Regimes of the Continental Scientific Drilling Committee, both reinforces and expands on earlier recommendations. The US Geodynamics Committee 1979 report of the Los Almos workshop, Continental Scientific Drilling Program, placed major emphasis on maximizing the scientific value of current and planned drilling by industry and government, supplementing these efforts with holes drilled solely for scientific purposes. Although the present report notes the importance of opportunities for scientific investigations that may be added on to current, mission-oriented drilling activities, the Panel on Thermal Regimes recognizes that such opportunities are limited and thus focused its study on holes dedicated to broad scientific objectives. 16 refs., 2 figs., 4 tabs.

Not Available

1984-01-01T23:59:59.000Z

142

Program or Field Office: Office of Legacy Management Project Title and I.D. No.: Bioremediation Injection and Related Activities at the Pinellas Site, Largo, Florida,  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Bioremediation Injection and Related Activities at the Pinellas Site, Largo, Florida, Bioremediation Injection and Related Activities at the Pinellas Site, Largo, Florida, LM 13-13 Location: Largo, Florida Proposed Action or Project Description: DOE proposes to use a Geoprobe to inject emulsified edible soybean oil (EEO) and anaerobic microbial solution into the surficial aquifer at the 4.5 Acre Site adjacent to the DOE Young - Rainey STAR Center (Pinellas Site) in Largo, Florida. The proposed action would enhance naturally occurring anaerobic biodegradation, thereby reducing vinyl chloride contamination along the southwest boundary of the 4.5 Acre Site. Dehalococcoides ethenogenes (DHE) is a type of microbe that occurs naturally in the aquifer. Bioaugmentation with a commercially available DHE culture used in conjunction with the EEO would maximize the efficiency of contaminant biodegradation. No genetically engineered or

143

Observations of the Behavior and Distribution of Fish in Relation to the Columbia River Navigation Channel and Channel Maintenance Activities  

SciTech Connect

This report is a compilation of 7 studies conducted for the U.S. Army Corps of Engineers between 1995 and 1998 which used hydroacoustic methods to study the behavior of migrating salmon in response to navigation channel maintenance activities in the lower Columbia River near river mile 45. Differences between daytime and nighttime behavior and fish densities were noted. Comparisons were made of fish distribution across the river (in the channel, channel margin or near shore) and fish depth upstream and downstream of dikes, dredges, and pile driving areas.

Carlson, Thomas J.; Ploskey, Gene R.; Johnson, R. L.; Mueller, Robert P.; Weiland, Mark A.; Johnson, P. N.

2001-10-19T23:59:59.000Z

144

Impaired skin integrity related to radiation therapy  

Science Conference Proceedings (OSTI)

Skin reactions associated with radiation therapy require frequent nursing assessment and intervention. Preventive interventions and early management can minimize the severity of the skin reaction. With the understanding of the pathogenesis of radiation skin reactions, the ET nurse can determine who is at risk and then implement preventive measures. Because radiation treatment is fractionated, skin reactions do not usually occur until midway through the course of therapy and will subside within a few weeks after completion of radiation. Many patients and their families still fear that radiation causes severe burns. Teaching and anticipatory guidance by the ET nurse is needed to assist patients and their families to overcome this fear, and to educate them on preventive skin care regimens.

Ratliff, C.

1990-09-01T23:59:59.000Z

145

Summary Report on Information Technology Integration Activities For project to Enhance NASA Tools for Coastal Managers in the Gulf of Mexico and Support Technology Transfer to Mexico  

SciTech Connect

Deliverable to NASA Stennis Space Center summarizing summarizes accomplishments made by Battelle and its subcontractors to integrate NASA's COAST visualization tool with the Noesis search tool developed under the Gulf of Mexico Regional Collaborative project.

Gulbransen, Thomas C.

2009-04-27T23:59:59.000Z

146

UTSI/CFFF MHD program completion and related activity. Technical progress report, September 1, 1995--December 31, 1995  

DOE Green Energy (OSTI)

The DOE Coal Fired Flow Facility (CFFF) is being maintained in a standby condition. In addition to routine preventative maintenance, a 1,000 MVA transformer failure occurred and repair actions are under consideration. Analyses and reporting in key areas of the MHD POC program continued. One topical report was completed during the quarter and three more plus a summary report for the Western coal tests are nearing completion. In addition, the data and test documentation from the over 3,000 hours of MHD testing on coal is in storage awaiting DOE instructions on location and format for archiving. Environmental activities include both actions required by the State of Tennessee for maintenance of permits and remedial actions identified by DOE that must be addressed. One of these remedial actions was completed this quarter with the removal and disposition of the asbestos from the CFFF cooling tower. The other remedial action reported is monitoring and studying the groundwater contaminants previously identified.

NONE

1996-01-01T23:59:59.000Z

147

Mapping of the cosmic ray events related to the solar activity for the period 2003-2005  

E-Print Network (OSTI)

The relationship between cosmic ray intensity decreases and solar events is still an open field of space research. In this work a complete study of solar events occurred from January 2003 to December 2005, is considered. This three-years time period characterized by an unexpected activity of the Sun was divided into 27-day intervals starting from BR 2313 (06.01.2003) to 2353 (21.12.2005), generating diagrams of the cosmic ray intensity data recorded at the Athens Neutron Monitor Station. This station is working at an altitude of 260m and cut-off rigidity 8.53GV provided to the Internet high-resolution data in real-time. A mapping of all available solar and interplanetary events, such as solar flares with importance M and X, coronal mass ejections (Halo and Partial) was done. As we are going down from the solar maximum to the declining phase of the 23rd solar cycle, a statistical overview of the corresponding relationship among these phenomena, the significant percentage of the connection of Halo CMEs and sola...

Papaioannou, A; Mavromichalaki, H

2010-01-01T23:59:59.000Z

148

Modular Integrated Energy Systems  

E-Print Network (OSTI)

of Honeywell's data collection activity for the integrated energy system (or CHP -- Cooling, Heat and Power recovery steam generator, and a waste heat fired absorption chiller. The key goals of the project are having on-line optimization, 路 Develop a 1000 Ton exhaust-driven absorption chiller, 路 Install

Oak Ridge National Laboratory

149

Technical progress and community relations activities for the fluidized bed thermal treatment process at the Rocky Flats Plant  

SciTech Connect

A fluidized bed system is being developed at Rocky Flats for the treatment of mixed waste (a mixture of radioactive and chemically hazardous waste). The current program builds on experience gained in the 1970's and 1980's in tests with bench-scale, pilot-scale, and demonstration-scale fluidized bed incinerators. Rocky Flat's fluidized bed system operates at low temperatures ([approximately]525--600[degrees]C) which eliminates many of the disadvantages associated with high temperature thermal treatment processes. The bed makes use of in situ neutralization of acidic off-gases by incorporating either sodium carbonate or a mixture of sodium carbonate and bicarbonate (Trona) in the bed media. This obviates using wet scrubbers to treat the off-gas. It is expected that once in production, the fluidized bed process will yield up to a 40:1 reduction in the volume of the waste feed. The current development program for the full-scale system is a nationwide effort incorporating input from national laboratories, universities, regulatory agencies, and private companies to assure the most current technology is utilized and that regulatory concerns are addressed. In addition to resolving technological issues, the fluidized bed program is addressing public concerns with a proactive community relations program.

Semones, G.B.; Williams, P.M.; Stiefvater, S.P.; Mitchell, D.L.; Roecker, B.D.

1993-01-01T23:59:59.000Z

150

Technical progress and community relations activities for the fluidized bed thermal treatment process at the Rocky Flats Plant  

SciTech Connect

A fluidized bed system is being developed at Rocky Flats for the treatment of mixed waste (a mixture of radioactive and chemically hazardous waste). The current program builds on experience gained in the 1970`s and 1980`s in tests with bench-scale, pilot-scale, and demonstration-scale fluidized bed incinerators. Rocky Flat`s fluidized bed system operates at low temperatures ({approximately}525--600{degrees}C) which eliminates many of the disadvantages associated with high temperature thermal treatment processes. The bed makes use of in situ neutralization of acidic off-gases by incorporating either sodium carbonate or a mixture of sodium carbonate and bicarbonate (Trona) in the bed media. This obviates using wet scrubbers to treat the off-gas. It is expected that once in production, the fluidized bed process will yield up to a 40:1 reduction in the volume of the waste feed. The current development program for the full-scale system is a nationwide effort incorporating input from national laboratories, universities, regulatory agencies, and private companies to assure the most current technology is utilized and that regulatory concerns are addressed. In addition to resolving technological issues, the fluidized bed program is addressing public concerns with a proactive community relations program.

Semones, G.B.; Williams, P.M.; Stiefvater, S.P.; Mitchell, D.L.; Roecker, B.D.

1993-01-01T23:59:59.000Z

151

NREL: Energy Systems Integration - Energy Systems Integration...  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Systems Integration Facility NREL's Energy Systems Integration Facility Garners LEED Platinum View the NREL Press Release. NREL's multistory Energy Systems Integration...

152

NREL: Energy Systems Integration - Integrated Deployment Workshop  

NLE Websites -- All DOE Office Websites (Extended Search)

Integrated Deployment Workshop Integrated Deployment Workshop The Energy Systems Integration Facility workshop, Integrated Deployment, was held August 21 - 23, 2012 at the National Renewable Energy Laboratory in Golden, Colorado. Each day of the workshop, which included a tour of the Energy Systems Integration Facility, focused on a different topic: Day 1: Utility-Scale Renewable Integration Day 2: Distribution-Level Integration Day 3: Isolated and Islanded Grid Systems The agenda and presentations from the workshop are below. Agenda Energy Systems Integration Facility Overview ESIF Technology Partnerships Integrated Deployment Model Integrated Deployment and the Energy Systems Integration Facility: Workshop Proceedings Printable Version Energy Systems Integration Home Research & Development

153

DOE Standard Integration Of Environment,Safety, and Health Into...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Standard Integration Of Environment,Safety, and Health Into Facility Disposition Activities DOE Standard Integration Of Environment,Safety, and Health Into Facility Disposition...

154

integr~1  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

7 7 AUDIT REPORT THE U.S. DEPARTMENT OF ENERGY' S MANAGEMENT OF RESEARCH AND DEVELOPMENT INTEGRATION MARCH 1998 U.S. DEPARTMENT OF ENERGY OFFICE OF INSPECTOR GENERAL OFFICE OF AUDIT SERVICES DEPARTMENT OF ENERGY Washington, DC 20585 MEMORANDUM FOR THE SECRETARY FROM: Gregory H. Friedman Principal Deputy Inspector General SUBJECT: INFORMATION : Audit Report on "Audit of the Department of Energy's Management of Research and Development Integration" BACKGROUND The Congress, independent task forces, and advisory groups have pointed out the need for the Department to improve its integration of research and development (R&D) projects. In the past, R&D management was carried out by different program offices with the research being

155

Integrated heterodyne terahertz transceiver  

DOE Patents (OSTI)

A heterodyne terahertz transceiver comprises a quantum cascade laser that is integrated on-chip with a Schottky diode mixer. A terahertz signal can be received by an antenna connected to the mixer, an end facet or sidewall of the laser, or through a separate active section that can amplify the incident signal. The quantum cascade laser couples terahertz local oscillator power to the Schottky diode to mix with the received terahertz signal to provide an intermediate frequency output signal. The fully integrated transceiver optimizes power efficiency, sensitivity, compactness, and reliability. The transceiver can be used in compact, fieldable systems covering a wide variety of deployable applications not possible with existing technology.

Wanke, Michael C. (Albuquerque, NM); Lee, Mark (Albuquerque, NM); Nordquist, Christopher D. (Albuquerque, NM); Cich, Michael J. (Albuquerque, NM)

2012-09-25T23:59:59.000Z

156

Building Technologies Office: Buildings to Grid Integration  

NLE Websites -- All DOE Office Websites (Extended Search)

Buildings to Grid Buildings to Grid Integration to someone by E-mail Share Building Technologies Office: Buildings to Grid Integration on Facebook Tweet about Building Technologies Office: Buildings to Grid Integration on Twitter Bookmark Building Technologies Office: Buildings to Grid Integration on Google Bookmark Building Technologies Office: Buildings to Grid Integration on Delicious Rank Building Technologies Office: Buildings to Grid Integration on Digg Find More places to share Building Technologies Office: Buildings to Grid Integration on AddThis.com... About Take Action to Save Energy Partner with DOE Activities Appliances Research Building Envelope Research Windows, Skylights, & Doors Research Space Heating & Cooling Research Water Heating Research Lighting Research

157

SunShot Initiative: Systems Integration  

NLE Websites -- All DOE Office Websites (Extended Search)

Systems Integration to someone by Systems Integration to someone by E-mail Share SunShot Initiative: Systems Integration on Facebook Tweet about SunShot Initiative: Systems Integration on Twitter Bookmark SunShot Initiative: Systems Integration on Google Bookmark SunShot Initiative: Systems Integration on Delicious Rank SunShot Initiative: Systems Integration on Digg Find More places to share SunShot Initiative: Systems Integration on AddThis.com... Concentrating Solar Power Photovoltaics Systems Integration Research, Development, & Demonstration Competitive Awards Balance of Systems Systems Integration High Penetration Solar Portal The High Penetration Solar Portal has timely information related to high penetration solar scenarios and integrating solar into the grid. The site allows utilities, grant awardees, regulators, researchers, and other solar

158

Energy Systems Integration | OpenEI Community  

Open Energy Info (EERE)

Energy Systems Integration Energy Systems Integration Home > Features > Groups Content Group Activity By term Q & A Feeds Content type Blog entry Discussion Document Event Poll Question Keywords Author Apply Rmckeel OpenEI maintenance March 8-9, 2013 Posted by: Rmckeel 8 Mar 2013 - 14:23 We would like to inform the OpenEI community that OpenEI will be undergoing a significant software upgrade during a maintenance window this weekend. We will be upgrading the wiki and... Tags: developer, Maintenance, OpenEI Qinsun Research topics related to ESI Posted by: Qinsun 15 Nov 2012 - 13:55 路 Modeling and optimization of multiple energy carriers [2-6] 路 ... Tags: ESI, MarketsIncentives Qinsun Prospects for Nuclear Power(Davis 2012) Posted by: Qinsun 15 Nov 2012 - 13:36 This paper analyzed the potential of nuclear power compare to other type of

159

December 4, 2008; HSS/Union Working Group Meeting on 2008 HSS/Union Topical Wrap Up - EEOICPA related activities and initiatives  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Worker Health and Safety (HS-10) Worker Health and Safety (HS-10) Current and Planned Former Worker Program and EEOICPA-related Activities/Initiatives: * Action - Standardize Former Worker Program (FWP) outreach training and vehicles for communication Response - Plan to hold a series of program conference calls to discuss strategies for outreach: share lessons learned, identify joint outreach efforts in order to reach a larger audience, discuss how to better align communication strategies based on demographics of each population of workers, etc. Will continue to meet with and educate DOE sites and worker populations as to the differences between FWP and EEOICPA, as well as how the programs can interface for the benefit of the workers. * Action - Expand outreach to former workers through a coordinating committee. Address

160

THE MASSIVE-BLACK-HOLE-VELOCITY-DISPERSION RELATION AND THE HALO BARYON FRACTION: A CASE FOR POSITIVE ACTIVE GALACTIC NUCLEUS FEEDBACK  

Science Conference Proceedings (OSTI)

Force balance considerations put a limit on the rate of active galactic nucleus radiation momentum output, L/c, capable of driving galactic superwinds and reproducing the observed M{sub BH}-{sigma} relation between black hole mass and spheroid velocity dispersion. We show that black holes cannot supply enough momentum in radiation to drive the gas out by pressure alone. Energy-driven winds give a M{sub BH}-{sigma} scaling favored by a recent analysis but also fall short energetically once cooling is incorporated. We propose that outflow triggering of star formation by enhancing the intercloud medium turbulent pressure and squeezing clouds can supply the necessary boost and suggest possible tests of this hypothesis. Our hypothesis simultaneously can account for the observed halo baryon fraction.

Silk, Joseph [Beecroft Institute of Particle Astrophysics and Cosmology, Department of Physics, University of Oxford, Denys Wilkinson Building, 1 Keble Road, Oxford OX1 3RH (United Kingdom); Nusser, Adi, E-mail: silk@astro.ox.ac.u, E-mail: adi@physics.technion.ac.i [Physics Department and the Asher Space Science Institute, Technion, Haifa 32000 (Israel)

2010-12-10T23:59:59.000Z

Note: This page contains sample records for the topic "integration activities related" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

NREL: Transmission Grid Integration - Issues Affecting Renewable...  

NLE Websites -- All DOE Office Websites (Extended Search)

issues related to the integration of renewable energy sources into the transmission system. Developing solutions to these challenges will enable higher penetrations of...

162

Angiotensin II induces secretion of plasminogen activator inhibitor 1 and a tissue metalloprotease inhibitor-related protein from rat brain astrocytes  

SciTech Connect

The present study investigates angiotensin (Ang) II effects on secretory protein synthesis in brain astrocytes cultured from neonatal and 21-day-old rats. Ang II-induced changes in the de novo synthesis of (35S)methionine-labeled secretory proteins were visualized using two-dimensional NaDodSO4/PAGE. Astrocytes from 21-day-old rat brain possess specific high-affinity receptors for Ang II. These cells express two Ang II-induced secretory proteins with Mr 55,000 (AISP-55K) and Mr 30,000 (AISP-30K), which were time- and dose-dependent (EC50, 1 nM). (Sar1, Ile8)Ang II (where Sar is sarcosine) inhibited Ang II-induced secretion of AISP-55K but not AISP-30K. N-terminal amino acid sequencing indicates that AISP-55K is identical to rat plasminogen activator inhibitor 1, whereas AISP-30K exhibits 72-81% identity to three closely related proteins: human tissue inhibitor of metalloproteases, a rat phorbol ester-induced protein, and the murine growth-responsive protein 16C8. Immunofluorescent staining with rat plasminogen activator inhibitor 1 antibody was induced in the majority of cells in culture after Ang II treatment of astrocytes from 21-day-old rat brains. Absence of this response to Ang II in astrocytes from neonatal rat brain provides evidence that this action of Ang II on astrocytes is developmentally regulated.

Olson, J.A. Jr.; Shiverick, K.T.; Ogilvie, S.; Buhi, W.C.; Raizada, M.K. (Univ. of Florida College of Medicine, Gainesville (USA))

1991-03-01T23:59:59.000Z

163

Integrated Experimental and Computational Strategy to Develop a Predictive  

NLE Websites -- All DOE Office Websites (Extended Search)

Integrated Experimental and Computational Strategy to Develop a Predictive Integrated Experimental and Computational Strategy to Develop a Predictive Understanding of Radiation Induced Matrix Remodeling in a Human Skin Tissue Model Marianne Sowa Pacific Northwest National Laboratory Abstract One of the early events following exposure to ionizing radiation is the activation of cell signaling pathways. These signaling pathways in turn elicit diverse proximal responses such as proliferation, apoptosis, activation of pro-survival programs and tissue remodeling. Radiation can in fact simultaneously activate several signaling pathways within cells leading to the induction of both protective effects as well as adverse consequences. However a key question is whether signaling cascades initiated by low doses are fundamentally different relative to high dose

164

Integrated Safety Management (ISM) - Work Planning and Control  

NLE Websites -- All DOE Office Websites (Extended Search)

Work Planning and Control Integrated Safety Management (ISM) ism logo NNSA Activity Level Work Planning & Control Processes - January 2006...

165

Systems Integration: Solar Energy Technologies Program (SETP) (Fact Sheet)  

DOE Green Energy (OSTI)

Fact sheet summarizing the goals and activities of the DOE Solar Energy Technologies Program efforts within its systems integration subprogram.

Not Available

2009-10-01T23:59:59.000Z

166

NREL: Energy Systems Integration - Energy Systems Integration...  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Systems Integration Facility Newsroom The Energy Systems Integration Facility (ESIF) will be one of the only megawatt-scale test facilities in the United States that...

167

NREL: Transmission Grid Integration - Solar Integration National...  

NLE Websites -- All DOE Office Websites (Extended Search)

of the Western Wind and Solar Integration Study and Eastern Wind Integration and Transmission Study datasets greatly advanced the modeling of wind and solar power production...

168

NREL: Transmission Grid Integration - Wind Integration Datasets  

NLE Websites -- All DOE Office Websites (Extended Search)

Wind Integration Datasets The Wind Integration Datasets provide energy professionals with a consistent set of wind profiles for the eastern United States and the western United...

169

A strategic analysis study-based approach to integrated risk assessment: Occupational health risks from environmental restoration and waste management activities at Hanford  

SciTech Connect

The goal of environmental restoration and waste management activities is to reduce public health risks or to delay risks to the future when new technology will be available for improved cleanup solutions. Actions to remediate the wastes on the Hanford Site will entail risks to workers, the public, and the environment that do not currently exist. In some circumstances, remediation activities will create new exposure pathways that are not present without cleanup activities. In addition, cleanup actions will redistribute existing health risks over time and space, and will likely shift health risks to cleanup workers in the short term. This report describes an approach to occupational risk assessment based on the Hanford Strategic Analysis Study and illustrates the approach by comparing worker risks for two options for remediation of N/K fuels, a subcategory of unprocessed irradiated fuels at Hanford.

Mahaffey, J.A.; Doctor, P.G.; Buschbom, R.L.; Glantz, C.S.; Daling, P.M.; Sever, L.E.; Vargo, G.J. Jr.; Strachan, D.M. (Pacific Northwest Lab., Richland, WA (United States)); Pajunen, A.L.; Hoyt, R.C.; Ludowise, J.D. (Westinghouse Hanford Co., Richland, WA (United States))

1993-06-01T23:59:59.000Z

170

Review: The impact of agricultural activities on water quality: A case for collaborative catchment-scale management using integrated wireless sensor networks  

Science Conference Proceedings (OSTI)

The challenge of improving water quality is a growing global concern, typified by the European Commission Water Framework Directive and the United States Clean Water Act. The main drivers of poor water quality are economics, poor water management, agricultural ... Keywords: Agricultural activities, Catchment, Collaborative, Water quality monitoring and management, Wireless sensor networks

Huma Zia, Nick R. Harris, Geoff V. Merrett, Mark Rivers, Neil Coles

2013-08-01T23:59:59.000Z

171

Generalized integrability conditions and target space geometry  

E-Print Network (OSTI)

In some higher dimensional nonlinear field theories integrable subsectors with infinitely many conservation laws have been identified by imposing additional integrability conditions. Originally, the complex eikonal equation was chosen as integrability condition, but recently further generalizations have been proposed. Here we show how these new integrability conditions may be derived from the geometry of the target space and, more precisely, from the Noether currents related to a certain class of target space transformations.

C. Adam; J. Sanchez-Guillen

2005-08-01T23:59:59.000Z

172

Ground-water characterization field activities for 1995--1996 Laboratory for Energy-Related Health Research, University of California, Davis  

SciTech Connect

This report documents ground-water characterization field activities completed from August to December 1995 and in January 1996 at the Laboratory for Energy-Related Health Research (LEHR) in Davis, California. The ground water at LEHR is one of several operable units under investigation by Pacific Northwest National Laboratory for the US Department of Energy. The purpose of this work was to further characterize the hydrogeology beneath the LEHR site, with the primary focus on ground water. The objectives were to estimate hydraulic properties for the two uppermost saturated hydrogeologic units (i.e., HSU-1 and HSU-2), and to determine distributions of contaminants of concern in these units. Activities undertaken to accomplish these objectives include well installation, geophysical logging, well development, ground-water sampling, slug testing, Westbay ground-water monitoring system installation, continuous water-level monitoring, Hydropunch installation, and surveying. Ground-water samples were collected from 61 Hydropunch locations. Analytical results from these locations and the wells indicate high chloroform concentrations trending from west/southwest to east/northeast in the lower portion of HSU-1 and in the upper and middle portions of HSU-2. The chloroform appears to originate near Landfill 2. Tritium was not found above the MCL in any of the well or Hydropunch samples. Hexavalent chromium was found at four locations with concentrations above the MCL in HSU-1 and at one location in HSU-2. One well in HSU-1 had a total chromium concentration above the MCL. Nitrate-nitrogen above the MCL was found at several Hydropunch locations in both HSU-1 and HSU-2.

Liikala, T.L.; Lanigan, D.C.; Last, G.V. [and others

1996-05-01T23:59:59.000Z

173

Roadmap Integration Team Presentation  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Presentation Presentation NP03-00 Slide 1 Generation IV Technology Roadmap NERAC Meeting: Washington, D.C. September 30, 2002 Roadmap Integration Team Presentation NP03-00 Slide 2 NERAC Meeting September 30, 2002 Generation IV Technology Roadmap * Identifies systems deployable by 2030 or earlier * Specifies six systems that offer significant advances towards: - Sustainability - Economics - Safety and reliability - Proliferation resistance and physical protection * Summarizes R&D activities and priorities for the systems * Lays the foundation for Generation IV R&D program plans Roadmap Integration Team Presentation NP03-00 Slide 3 NERAC Meeting September 30, 2002 The Technical Roadmap Report * Discusses the benefits, goals and challenges, and the importance of the fuel cycle * Describes evaluation and selection process

174

Materials Reliability Program: Reactor Pressure Vessel Integrity Training Module (MRP-286)  

Science Conference Proceedings (OSTI)

For many reactor pressure vessels, embrittlement is the primary concern in ensuring continued safe operation. The shutdown of the Yankee Rowe plant, which occurred because of uncertainties related to embrittlement of the vessel, demonstrated the importance of adequately addressing embrittlement issues. Managing embrittlement involves the integration, management, and implementation of diverse technical, regulatory, planning, and economic activities. Reactor vessel embrittlement management is an essential ...

2010-11-22T23:59:59.000Z

175

Reactor Vessel Embrittlement Management Handbook: A Handbook for Managing Reactor Vessel Embrittlement and Vessel Integrity  

Science Conference Proceedings (OSTI)

For many reactor pressure vessels, embrittlement is the primary concern for continued safe operation. The shutdown of the Yankee Rowe plant because of uncertainties related to embrittlement of the vessel demonstrates the importance of adequately addressing embrittlement issues. Managing embrittlement requires integration, management, and implementation of diverse technical, regulatory, planning, and economic activities. An effective embrittlement management program will ensure vessel safety and reliabili...

1994-01-22T23:59:59.000Z

176

Heat Pipe Integrated Microsystems  

SciTech Connect

The trend in commercial electronics packaging to deliver ever smaller component packaging has enabled the development of new highly integrated modules meeting the demands of the next generation nano satellites. At under ten kilograms, these nano satellites will require both a greater density electronics and a melding of satellite structure and function. Better techniques must be developed to remove the subsequent heat generated by the active components required to-meet future computing requirements. Integration of commercially available electronics must be achieved without the increased costs normally associated with current generation multi chip modules. In this paper we present a method of component integration that uses silicon heat pipe technology and advanced flexible laminate circuit board technology to achieve thermal control and satellite structure. The' electronics/heat pipe stack then becomes an integral component of the spacecraft structure. Thermal management on satellites has always been a problem. The shrinking size of electronics and voltage requirements and the accompanying reduction in power dissipation has helped the situation somewhat. Nevertheless, the demands for increased onboard processing power have resulted in an ever increasing power density within the satellite body. With the introduction of nano satellites, small satellites under ten kilograms and under 1000 cubic inches, the area available on which to place hot components for proper heat dissipation has dwindled dramatically. The resulting satellite has become nearly a solid mass of electronics with nowhere to dissipate heat to space. The silicon heat pipe is attached to an aluminum frame using a thermally conductive epoxy or solder preform. The frame serves three purposes. First, the aluminum frame provides a heat conduction path from the edge of the heat pipe to radiators on the surface of the satellite. Secondly, it serves as an attachment point for extended structures attached to the satellite such as solar panels, radiators, antenna and.telescopes (for communications or sensors). Finally, the packages make thermal contact to the surface of the silicon heat pipe through soft thermal pads. Electronic components can be placed on both sides of the flexible circuit interconnect. Silicon heat pipes have a number of advantages over heat pipe constructed from other materials. Silicon heat pipes offer the ability to put the heat pipe structure beneath the active components of a processed silicon wafer. This would be one way of efficiently cooling the heat generated by wafer scale integrated systems. Using this technique, all the functions of a satellite could be reduced to a few silicon wafers. The integration of the heat pipe and the electronics would further reduce the size and weight of the satellite.

Gass, K.; Robertson, P.J.; Shul, R.; Tigges, C.

1999-03-30T23:59:59.000Z

177

An Integrated Safety Assessment Methodology for Generation IV Nuclear Systems  

SciTech Connect

The Generation IV International Forum (GIF) Risk and Safety Working Group (RSWG) was created to develop an effective approach for the safety of Generation IV advanced nuclear energy systems. Early work of the RSWG focused on defining a safety philosophy founded on lessons learned from current and prior generations of nuclear technologies, and on identifying technology characteristics that may help achieve Generation IV safety goals. More recent RSWG work has focused on the definition of an integrated safety assessment methodology for evaluating the safety of Generation IV systems. The methodology, tentatively called ISAM, is an integrated 搕oolkit consisting of analytical techniques that are available and matched to appropriate stages of Generation IV system concept development. The integrated methodology is intended to yield safety-related insights that help actively drive the evolving design throughout the technology development cycle, potentially resulting in enhanced safety, reduced costs, and shortened development time.

Timothy J. Leahy

2010-06-01T23:59:59.000Z

178

Improved Coupled Z?R and k?R Relations and the Resulting Ambiguities in the Determination of the Vertical Distribution of Rain from the Radar Backscatter and the Integrated Attenuation  

Science Conference Proceedings (OSTI)

Several algorithms to calculate a rain-rate profile from a single-frequency air- or spaceborne radar backscatter profile and a given path-integrated attenuation have been proposed. The accuracy of any such algorithm is limited by the ambiguities ...

Z. S. Haddad; A. R. Jameson; E. Im; S. L. Durden

1995-12-01T23:59:59.000Z

179

ORISE: Integrated Safety Management (ISM)  

NLE Websites -- All DOE Office Websites (Extended Search)

Integrated Safety Management (ISM) Integrated Safety Management (ISM) Oak Ridge Associated Universities (ORAU) is committed to performing work safely as it operates the Oak Ridge Institute for Science and Education (ORISE). ORAU supports the U.S. Department of Energy (DOE) policy of using management systems to integrate safety into work practices at all levels. ORAU defines "safety" as encompassing environment, safety and health, and also includes waste minimization and pollution prevention. All ORAU programs and departments actively pursue continuous improvement, and the addition of Integrated Safety Management (ISM) concepts further strengthens safety as a standard in ORISE's culture. ORAU has accepted the ISM concept by contract under DOE Acquisition Regulations Clause 970.5204-2 and DOE Policy 450.4, Safety Management System Policy.

180

Integrated Designs to Integrated Operations using BMS  

NLE Websites -- All DOE Office Websites (Extended Search)

Integrated Designs to Integrated Operations using BMS Speaker(s): Punit Desai Date: February 6, 2013 - 12:15pm Location: 90-3122 Seminar HostPoint of Contact: Girish Ghatikar The...

Note: This page contains sample records for the topic "integration activities related" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Georeactor Variability and Integrity  

E-Print Network (OSTI)

As a deep-Earth energy source, the planetocentric nuclear-fission georeactor concept is on a more secure scientific footing than the previous idea related to the assumed growth of the inner core. Unlike previously considered deep-Earth energy sources, which are essentially constant on a human time-scale, variability in nuclear fission reactors can arise from changes in composition and/or position of fuel, moderators, and neutron absorbers. Tantalizing circumstantial evidence invites inquiry into the possibility of short-term planetocentric nuclear fission reactor variability. This brief communication emphasizes the importance of scientific integrity and highlights the possibility of variable georeactor power output so that these might be borne in mind in future investigations, especially those related to the Earth's heat flux.

J. Marvin Herndon

2005-10-04T23:59:59.000Z

182

Georeactor Variability and Integrity  

E-Print Network (OSTI)

As a deep-Earth energy source, the planetocentric nuclear-fission georeactor concept is on a more secure scientific footing than the previous idea related to the assumed growth of the inner core. Unlike previously considered deep-Earth energy sources, which are essentially constant on a human time-scale, variability in nuclear fission reactors can arise from changes in composition and/or position of fuel, moderators, and neutron absorbers. Tantalizing circumstantial evidence invites inquiry into the possibility of short-term planetocentric nuclear fission reactor variability. This brief communication emphasizes the importance of scientific integrity and highlights the possibility of variable georeactor power output so that these might be borne in mind in future investigations, especially those related to the Earth's heat flux.

Herndon, J M

2005-01-01T23:59:59.000Z

183

MHD Integrated Topping Cycle Project  

DOE Green Energy (OSTI)

This fourteenth quarterly technical progress report of the MHD Integrated Topping Cycle Project presents the accomplishments during the period November 1, 1990 to January 31, 1991. Testing of the High Pressure Cooling Subsystem electrical isolator was completed. The PEEK material successfully passed the high temperature, high pressure duration tests (50 hours). The Combustion Subsystem drawings were CADAM released. The procurement process is in progress. An equipment specification and RFP were prepared for the new Low Pressure Cooling System (LPCS) and released for quotation. Work has been conducted on confirmation tests leading to final gas-side designs and studies to assist in channel fabrication.The final cathode gas-side design and the proposed gas-side designs of the anode and sidewall are presented. Anode confirmation tests and related analyses of anode wear mechanisms used in the selection of the proposed anode design are presented. Sidewall confirmation tests, which were used to select the proposed gas-side design, were conducted. The design for the full scale CDIF system was completed. A test program was initiated to investigate the practicality of using Avco current controls for current consolidation in the power takeoff (PTO) regions and to determine the cause of past current consolidation failures. Another important activity was the installation of 1A4-style coupons in the 1A1 channel. A description of the coupons and their location with 1A1 channel is presented herein.

Not Available

1992-02-01T23:59:59.000Z

184

NREL: Technology Deployment - Integrated Deployment Model  

NLE Websites -- All DOE Office Websites (Extended Search)

Integrated Deployment Model Integrated Deployment Model NREL's integrated deployment model provides a framework to focus on the national goal of accelerating market adoption of clean energy technologies through local efforts. With support from the U.S. Department of Energy (DOE), NREL developed and applies the integrated deployment model to select projects including disaster recovery, statewide activities, federal agency support, island activities, and community renewable energy deployment. How the Model Works To address the complex challenges of multi-technology, multi-stakeholder, and multi-fuel deployment, NREL created the integrated deployment model to support each technology area separately but also consider the integration points between the technologies. NREL also identifies the cross-cutting

185

Integration of Formal Job Hazard Analysis & ALARA Work Practice  

Science Conference Proceedings (OSTI)

ALARA work practices have traditionally centered on reducing radiological exposure and controlling contamination. As such, ALARA policies and procedures are not well suited to a wide range of chemical and human health issues. Assessing relative risk, identifying appropriate engineering/administrative controls and selecting proper Personal Protective Equipment (PPE) for non nuclear work activities extends beyond the limitations of traditional ALARA programs. Forging a comprehensive safety management program in today's (2002) work environment requires a disciplined dialog between health and safety professionals (e.g. safety, engineering, environmental, quality assurance, industrial hygiene, ALARA, etc.) and personnel working in the field. Integrating organizational priorities, maintaining effective pre-planning of work and supporting a team-based approach to safety management represents today's hallmark of safety excellence. Relying on the mandates of any single safety program does not provide industrial hygiene with the tools necessary to implement an integrated safety program. The establishment of tools and processes capable of sustaining a comprehensive safety program represents a key responsibility of industrial hygiene. Fluor Hanford has built integrated safety management around three programmatic attributes: (1) Integration of radiological, chemical and ergonomic issues under a single program. (2) Continuous improvement in routine communications among work planning/scheduling, job execution and management. (3) Rapid response to changing work conditions, formalized work planning and integrated worker involvement.

NELSEN, D.P.

2002-09-01T23:59:59.000Z

186

Rogers dilogarithm in integrable systems  

E-Print Network (OSTI)

We dicuss some curious aspects of the Rogers dilogarithm and the functional relations in integrable systems in two dimensions. This is for the proceedings of the XX1 Differential Geometry Methods in Theoretical Physics, Tianjin, China, 5-9 June 1992.

Kuniba, A

1992-01-01T23:59:59.000Z

187

Greater than the Sum of its Parts; Electricity, Resources, & Building Systems Integration (ERBSI) (Fact Sheet)  

Science Conference Proceedings (OSTI)

NREL's Electricity, Resources, and Building Systems Integration Center brings together a diverse group of experts performing grid integration and optimization R&D activities.

Not Available

2009-11-01T23:59:59.000Z

188

Energy Systems Integration - Q & A | OpenEI Community  

Open Energy Info (EERE)

Energy Systems Integration - Q & A Home > Energy Systems Integration Content Group Activity By term Q & A Feeds No questions have been added to this group yet. Groups Menu You must...

189

Automated testing as an aid to systems integration  

Science Conference Proceedings (OSTI)

Within BT憇 Systems Integration department, the integration and testing of large, complex software systems often requires large and complex test regimes. Optimising the activities and time-scales within this part of the life cycle will invariably ...

I. D. Hicks; G. J. South; A. O. Oshisanwo

1997-07-01T23:59:59.000Z

190

Integrated regional assessment: qualitative and quantitative issues  

Science Conference Proceedings (OSTI)

Qualitative and quantitative issues are particularly significant in integrated regional assessment. This chapter examines the terms 搎ualitative and 搎uantitative separately and in relation to one another, along with a discussion of the degree of interdependence or overlap between the two. Strategies for integrating the two general approaches often produce uneasy compromises. However, integrated regional assessment provides opportunities for strong collaborations in addressing specific problems in specific places.

Malone, Elizabeth L.

2009-11-19T23:59:59.000Z

191

Community Relations  

NLE Websites -- All DOE Office Websites (Extended Search)

Students at EnergySmart Schools and people at Rebuilding Together events Community Relations EETD and Lawrence Berkeley National Laboratory's community relations mission and...

192

OVERVIEW OF HANFORD SINGLE SHELL TANK (SST) STRUCTURAL INTEGRITY - 12123  

SciTech Connect

To improve the understanding of the single-shell tanks (SSTs) integrity, Washington River Protection Solutions, LLC (WRPS), the USDOE Hanford Site tank contractor, developed an enhanced Single-Shell Tank Integrity Project in 2009. An expert panel on SST integrity, consisting of various subject matters experts in industry and academia, was created to provide recommendations supporting the development of the project. This panel developed 33 recommendations in four main areas of interest: structural integrity, liner degradation, leak integrity and prevention, and mitigation of contamination migration. Seventeen of these recommendations were used to develop the basis for the M-45-10-1 Change Package for the Hanford Federal Agreement and Compliance Order, which is also known as the Tri-Party Agreement. The structural integrity of the tanks is a key element in completing the cleanup mission at the Hanford Site. There are eight primary recommendations related to the structural integrity of Hanford SSTs. Six recommendations are being implemented through current and planned activities. The structural integrity of the Hanford SSTs is being evaluated through analysis, monitoring, inspection, materials testing, and construction document review. Structural evaluation in the form of analysis is performed using modern finite element models generated in ANSYS{reg_sign} The analyses consider in-situ, thermal, operating loads and natural phenomena such as earthquakes. Structural analysis of 108 of 149 Hanford SSTs has concluded that the tanks are structurally sound and meet current industry standards. Analyses of the remaining Hanford SSTs are scheduled for FY2013. Hanford SSTs are monitored through a dome deflection program. The program looks for deflections of the tank dome greater than 1/4 inch. No such deflections have been recorded. The tanks are also subjected to visual inspection. Digital cameras record the interior surface of the concrete tank domes, looking for cracks and other surface conditions that may indicate signs of structural distress. The condition of the concrete and rebar of the Hanford SSTs is currently being tested and planned for additional activities in the near future. Concrete and rebar removed from the dome of a 65-year-old tank is being tested for mechanics properties and condition. Results indicated stronger than designed concrete with additional Petrographic examination and rebar testing ongoing. Material properties determined from previous efforts combined with current testing and construction document review will help to generate a database that will provide continuing indication of Hanford SST structural integrity.

RAST RS; RINKER MW; WASHENFELDER DJ; JOHNSON JB

2012-01-25T23:59:59.000Z

193

Overview of Hanford Single Shell Tank (SST) Structural Integrity - 14023  

Science Conference Proceedings (OSTI)

To improve the understanding of the single-shell tanks (SSTs) integrity, Washington River Protection Solutions, LLC (WRPS), the USDOE Hanford Site tank contractor, developed an enhanced Single-Shell Tank Integrity Project (SSTIP) in 2009. An expert panel on SST integrity, consisting of various subject matters experts in industry and academia, was created to provide recommendations supporting the development of the project. This panel developed 33 recommendations in four main areas of interest: structural integrity, liner degradation, leak integrity and prevention, and mitigation of contamination migration, Seventeen of these recommendations were used to develop the basis for the M-45-10-1 Change Package for the Hanford Federal Agreement and Compliance Order, which is also known as the Tri-Party Agreement. The structural integrity of the tanks is a key element in completing the cleanup mission at the Hanford Site. There are eight primary recommendations related to the structural integrity of Hanford Single-Shell Tanks. Six recommendations are being implemented through current and planned activities. The structural integrity of the Hanford is being evaluated through analysis, monitoring, inspection, materials testing, and construction document review. Structural evaluation in the form of analysis is performed using modern finite element models generated in ANSYS. The analyses consider in-situ, thermal, operating loads and natural phenomena such as earthquakes. Structural analysis of 108 of 149 Hanford Single-Shell Tanks has concluded that the tanks are structurally sound and meet current industry standards. Analysis of the remaining Hanford Single-Shell Tanks is scheduled for FY2014. Hanford Single-Shell Tanks are monitored through a dome deflection program. The program looks for deflections of the tank dome greater than ? inch. No such deflections have been recorded. The tanks are also subjected to visual inspection. Digital cameras record the interior surface of the concrete tanks, looking for cracks and other surface conditions that may indicate signs of structural distress. The condition of the concrete and rebar of the Hanford Single-Shell Tanks is currently being tested and planned for additional activities in the near future. Concrete and rebar removed from the dome of a 65 year old tank was tested for mechanics properties and condition. Results indicated stronger than designed concrete with additional Petrographic examination and rebar completed. Material properties determined from previous efforts combined with current testing and construction document review will help to generate a database that will provide indication of Hanford Single-Shell Tank structural integrity.

Rast, Richard S.; Washenfelder, Dennis J.; Johnson, Jeremy M.

2013-11-14T23:59:59.000Z

194

Metal Silicides: An Integral Part of Microelectronics  

Science Conference Proceedings (OSTI)

Metal silicide thin films are integral parts of all microelectronics devices. .... with activation energy around 11.5 eV for refractory metal/silicon systems and 0.5 eV

195

Photonic integrated circuits for optical logic applications  

E-Print Network (OSTI)

The optical logic unit cell is the photonic analog to transistor-transistor logic in electronic devices. Active devices such as InP-based semiconductor optical amplifiers (SOA) emitting at 1550 nm are vertically integrated ...

Williams, Ryan Daniel

2007-01-01T23:59:59.000Z

196

Initial findings: The integration of water loop heat pump and building structural thermal storage systems  

SciTech Connect

This report is one in a series of reports describing research activities in support of the US Department of Energy (DOE) Commercial Building System Integration Research Program. The goal of the program is to develop the scientific and technical basis for improving integrated decision-making during design and construction. Improved decision-making could significantly reduce buildings' energy use by the year 2010. The objectives of the Commercial Building System Integration Research Program are: to identify and quantify the most significant energy-related interactions among building subsystems; to develop the scientific and technical basis for improving energy related interactions in building subsystems; and to provide guidance to designers, owners, and builders for improving the integration of building subsystems for energy efficiency. The lead laboratory for this program is the Pacific Northwest Laboratory. A wide variety of expertise and resources from industry, academia, other government entities, and other DOE laboratories are used in planning, reviewing and conducting research activities. Cooperative and complementary research, development, and technology transfer activities with other interested organizations are actively pursued. In this report, the interactions of a water loop heat pump system and building structural mass and their effect on whole-building energy performance is analyzed. 10 refs., 54 figs., 1 tab.

Marseille, T.J.; Johnson, B.K.; Wallin, R.P.; Chiu, S.A.; Crawley, D.B.

1989-01-01T23:59:59.000Z

197

Energy Storage Integration Council (ESIC): 2013 Update  

Science Conference Proceedings (OSTI)

Recent electric energy storage deployments have encountered several challenges, including problems stemming from poor system integration, grid integration difficulties, insufficient factory testing and qualification, safety and reliability issues, and inadequate common test protocols. The utility industry needs clear requirements developed so vendors can manufacture cost-effective energy storage products to support the generation, transmission, and distribution system. To address these and related ...

2013-12-26T23:59:59.000Z

198

Buildings to Grid Integration Technical Meeting: National Renewable Energy Laboratory, Energy Systems Integration Facility, Golden, CO  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Buildings to Grid Integration Buildings to Grid Integration Technical Meeting: National Renewable Energy Laboratory, Energy Systems Integration Facility Golden, CO December 2012 1 WELCOME Welcome to the Buildings to Grid Integration Technical Meeting and to Golden, Colorado. On behalf of the U.S. Department of Energy Building Technologies Program, I would like to thank you for attending and for your active participation. I look forward to meeting you and hearing your perspective on enabling significant buildings to grid integration. Everyone is here because we are working to make efficient transactions between buildings and the grid a commercial reality, whether it is through

199

MHD Technology Transfer, Integration and Review Committee  

DOE Green Energy (OSTI)

This fifth semi-annual status report of the MHD Technology Transfer, Integration, and Review Committee (TTIRC) summarizes activities of the TTIRC during the period April 1990 through September 1990. It includes summaries and minutes of committee meetings, progress summaries of ongoing Proof-of-Concept (POC) contracts, discussions pertaining to technical integration issues in the POC program, and planned activities for the next six months.

Not Available

1992-01-01T23:59:59.000Z

200

Integration of alternative feedstreams for biomass treatment and utilization  

DOE Patents (OSTI)

The present invention provides a method for treating biomass composed of integrated feedstocks to produce fermentable sugars. One aspect of the methods described herein includes a pretreatment step wherein biomass is integrated with an alternative feedstream and the resulting integrated feedstock, at relatively high concentrations, is treated with a low concentration of ammonia relative to the dry weight of biomass. In another aspect, a high solids concentration of pretreated biomass is integrated with an alternative feedstream for saccharifiaction.

Hennessey, Susan Marie (Avondale, PA); Friend, Julie (Claymont, DE); Dunson, Jr., James B. (Newark, DE); Tucker, III, Melvin P. (Lakewood, CO); Elander, Richard T. (Evergreen, CO); Hames, Bonnie (Westminster, CO)

2011-03-22T23:59:59.000Z

Note: This page contains sample records for the topic "integration activities related" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Building Technologies Office: About the Commercial Buildings Integration  

NLE Websites -- All DOE Office Websites (Extended Search)

About the Commercial About the Commercial Buildings Integration Program to someone by E-mail Share Building Technologies Office: About the Commercial Buildings Integration Program on Facebook Tweet about Building Technologies Office: About the Commercial Buildings Integration Program on Twitter Bookmark Building Technologies Office: About the Commercial Buildings Integration Program on Google Bookmark Building Technologies Office: About the Commercial Buildings Integration Program on Delicious Rank Building Technologies Office: About the Commercial Buildings Integration Program on Digg Find More places to share Building Technologies Office: About the Commercial Buildings Integration Program on AddThis.com... About Take Action to Save Energy Activities Partner with DOE Commercial Buildings Resource Database

202

Integrated formal operations plan  

SciTech Connect

The concept of formal operations (that is, a collection of business practices to assure effective, accountable operations) has vexed the Laboratory for many years. To date most attempts at developing such programs have been based upon rigid, compliance-based interpretations of a veritable mountain of Department of Energy (DOE) orders, directives, notices, and standards. These DOE dictates seldom take the broad view but focus on highly specialized programs isolated from the overall context of formal operations. The result is a confusing array of specific, and often contradictory, requirements that produce a patchwork of overlapping niche programs. This unnecessary duplication wastes precious resources, dramatically increases the complexity of our work processes, and communicates a sense of confusion to our customers and regulators. Coupled with the artificial divisions that have historically existed among the Laboratory`s formal operations organizations (quality assurance, configuration management, records management, training, etc.), this approach has produced layers of increasingly vague and complex formal operations plans, each of which interprets its parent and adds additional requirements of its own. Organizational gridlock ensues whenever an activity attempts to implement these bureaucratic monstrosities. The integrated formal operations plan presented is to establish a set of requirements that must be met by an integrated formal operations program, assign responsibilities for implementation and operation of the program, and specify criteria against which the performance of the program will be measured. The accountable line manager specifies the items, processes, and information (the controlled elements) to which the formal operations program specified applies. The formal operations program is implemented using a graded approach based on the level of importance of the various controlled elements and the scope of the activities in which they are involved.

Cort, G.; Dearholt, W.; Donahue, S.; Frank, J.; Perkins, B.; Tyler, R.; Wrye, J.

1994-01-05T23:59:59.000Z

203

Integrated optical sensor  

SciTech Connect

An integrated optical sensor for arc welding having multifunction feedback control. The sensor, comprising generally a CCD camera and diode laser, is positioned behind the arc torch for measuring weld pool position and width, standoff distance, and post-weld centerline cooling rate. Computer process information from this sensor is passed to a controlling computer for use in feedback control loops to aid in the control of the welding process. Weld pool position and width are used in a feedback loop, by the weld controller, to track the weld pool relative to the weld joint. Sensor standoff distance is used in a feedback loop to control the contact tip to base metal distance during the welding process. Cooling rate information is used to determine the final metallurgical state of the weld bead and heat affected zone, thereby controlling post-weld mechanical properties.

Watkins, Arthur D. (Idaho Falls, ID); Smartt, Herschel B. (Idaho Falls, ID); Taylor, Paul L. (Idaho Falls, ID)

1994-01-01T23:59:59.000Z

204

Integrated optical sensor  

DOE Patents (OSTI)

An integrated optical sensor for arc welding having multifunction feedback control is described. The sensor, comprising generally a CCD camera and diode laser, is positioned behind the arc torch for measuring weld pool position and width, standoff distance, and post-weld centerline cooling rate. Computer process information from this sensor is passed to a controlling computer for use in feedback control loops to aid in the control of the welding process. Weld pool position and width are used in a feedback loop, by the weld controller, to track the weld pool relative to the weld joint. Sensor standoff distance is used in a feedback loop to control the contact tip to base metal distance during the welding process. Cooling rate information is used to determine the final metallurgical state of the weld bead and heat affected zone, thereby controlling post-weld mechanical properties. 6 figures.

Watkins, A.D.; Smartt, H.B.; Taylor, P.L.

1994-01-04T23:59:59.000Z

205

An Advanced Measurement Concept: The Integrated Sensor  

Science Conference Proceedings (OSTI)

An integrated sensor is a complete measurement system that communicates its signals to a data collection and archival facility. The paper describes the concept, and how it developed from and relates to the more traditional systems. It includes a ...

Julian M. Pike

1986-03-01T23:59:59.000Z

206

Solar Energy Education. Humanities: activities and teacher's guide. Field test edition  

DOE Green Energy (OSTI)

Activities are outlined to introduce students to information on solar energy while performing ordinary classroom work. In this teaching manual solar energy is integrated with the humanities. The activities include such things as stories, newspapers, writing assignments, and art and musical presentations all filled with energy related terms. An energy glossary is provided. (BCS)

Not Available

1982-01-01T23:59:59.000Z

207

Integrated Safety Management Policy | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Services 禄 Program Management 禄 Quality Assurance 禄 Integrated Services 禄 Program Management 禄 Quality Assurance 禄 Integrated Safety Management Policy Integrated Safety Management Policy This Integrated Safety Management (ISM) System Description (ISMSD) defines how the U.S. Department of Energy (DOE) Office of Environmental Management (EM) integrates environment, safety, and health requirements and controls into Federal work activities, and oversees implementation of ISM within EM federal and contractor activities. It explains our safety values, objectives and approach for ensuring protection to the public, worker and the environment, consistent with DOE Policy 450.4, Safety Management System Policy. The ISMSD describes how EM conducts work following the seven ISM Guiding Principles, the five ISM core functions, and also incorporates the

208

Integrated Safety Management Policy | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Integrated Integrated Safety Management Policy Integrated Safety Management Policy This Integrated Safety Management (ISM) System Description (ISMSD) defines how the U.S. Department of Energy (DOE) Office of Environmental Management (EM) integrates environment, safety, and health requirements and controls into Federal work activities, and oversees implementation of ISM within EM federal and contractor activities. It explains our safety values, objectives and approach for ensuring protection to the public, worker and the environment, consistent with DOE Policy 450.4, Safety Management System Policy. The ISMSD describes how EM conducts work following the seven ISM Guiding Principles, the five ISM core functions, and also incorporates the four supplemental safety culture elements from DOE Implementation Plan to

209

Process Development and Integration Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

* 1617 Cole Boulevard, Golden, Colorado 80401-3305 * 303-275-3000 * www.nrel.gov * 1617 Cole Boulevard, Golden, Colorado 80401-3305 * 303-275-3000 * www.nrel.gov NREL is a national laboratory of the U. S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC. NREL/FS-5200-48351 * June 2011 Process Development and Integration Laboratory Scope. The Process Development and Integration Laboratory (PDIL) within the National Renewable Energy Laboratory (NREL) is operated by the National Center for Photovoltaics (NCPV). The PDIL is a unique collaborative facility where industry and universities can work closely with NREL scientists on integrated equipment to answer pressing questions related to photovoltaics (PV) development. We work with a wide range of PV materials-from crystalline silicon to thin films (amorphous, nano- and

210

Wind Integration Study Methods (Presentation)  

DOE Green Energy (OSTI)

This presentation provides an overview of common elements, differences, integration costs, and errors in integration analysis.

Milligan, M.; Kirby, B.

2011-04-01T23:59:59.000Z

211

Energy Systems Integration  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Systems Integration Systems Integration Ben Kroposki, PhD, PE Director, Energy Systems Integration National Renewable Energy Laboratory 2 Reducing investment risk and optimizing systems in a rapidly changing energy world * Increasing penetration of variable RE in grid * Increasing ultra high energy efficiency buildings and controllable loads * New data, information, communications and controls * Electrification of transportation and alternative fuels * Integrating energy storage (stationary and mobile) and thermal storage * Interactions between electricity/thermal/fuels/data pathways * Increasing system flexibility and intelligence Current Energy Systems Future Energy Systems Why Energy Systems Integration? 3 Energy Systems Integration Continuum Scale Appliance (Plug)

212

Suboptimal Assessment of Interunit Task Interdependence: Modes of Integration and Information Processing for Coordination Performance  

Science Conference Proceedings (OSTI)

This investigation extends previous research on cross-functional integration. Building on earlier theoretical development, a graduated sequence of modes of integration is tested in relation to interunit task interdependence in a global logistics support ... Keywords: coordination, integration, interdependence, uncertainty

J. Daniel Sherman; Robert T. Keller

2011-01-01T23:59:59.000Z

213

Secretary Chu's Policy Statement on Scientific Integrity Notes...  

Office of Scientific and Technical Information (OSTI)

Secretary Steven Chu "Science and technology are the foundation of all Department of Energy activities...," the Secretarial Policy Statement on Scientific Integrity opens....

214

Related Documents  

E-Print Network (OSTI)

Subject: ESP-SCSI for Parameter Data This proposal defines a mechanism for applying SA parameter data to descriptors that are transferred in data-in buffer and/or data-out buffer parameter data. Revision History r0 r1 Original revision Revise based on comments from April CAP Security WG, Matt Ball, and Paul Entzel Also increased the sequence count fields to 8 bytes (64 bits) and updated for combined encryption/integrity modes

From Ralph; O. Weber

2007-01-01T23:59:59.000Z

215

Systems Integration Division Homepage  

Science Conference Proceedings (OSTI)

... systems integration and engineering, life cycle assessment, cyber-physical systems, productivity measurement, sustainability and energy efficiency. ...

2013-09-16T23:59:59.000Z

216

IEC 61850 Technical Integration Evaluation  

Science Conference Proceedings (OSTI)

Designs and implementations of standards can reveal portions of formal standards that need to be further defined and/or issues that emerge in the integration or harmonization of two standards. This report captures the experience of using IEC 61850 and other related standards such as IEC 61970/61968 as part of an implementation in a Tool Kit. It also describes the implementation as well as the issues that have emerged from the experience of a tool developer.

2008-12-22T23:59:59.000Z

217

Integrated Energy Systems (IES) for Buildings: A Market Assessment...  

Open Energy Info (EERE)

topics related to ESI Prospects for Nuclear Power(Davis 2012) A Framework for the Optimization of Integrated Energy Systems(Jain and Alleyne 2012) Energy System...

218

National electrical code changes for 1996 and USA participation in International Energy Agency activities related to photovoltaics safety and grid interconnection  

DOE Green Energy (OSTI)

As photovoltaic (PV) systems gain more acceptance in utility-interactive applications throughout the world, many organizations are placing increasingly higher priorities on writing guidelines, codes and standards. These guidelines and codes are being written to improve safety, installation, acceptance, listing or certification of the PV components or systems. Sandia National Laboratories` PV System Applications Department is working closely with the PV industry to address issues that are associated with fire and personnel safety and with National Electrical Code (NEC) requirements. Additionally, the United States has agreed to participate in two of the International Energy Agency (IEA) Annexes (topical tasks) of the Implementing Agreement for a Cooperative Programme on Photovoltaic Power Systems. This paper describes events and activities associated with the NEC and the IEA that are being led by Sandia National Laboratories with broad participation by the US PV industry.

Bower, W.

1995-01-01T23:59:59.000Z

219

Safeguards-by-Design: An Element of 3S Integration  

SciTech Connect

In 2008, the 20/20 Vision for the Future background report by the IAEA Director General identified the possibility of integrating certain activities related to safeguards, safety, and security. Later in the year, the independent Commission report prepared at the request of the IAEA Director General noted that the Agency抯 roles in nuclear safeguards, safety, and security (3S) complement and can mutually reinforce each other. Safeguards-by-design (SBD) is a practical measure that strengthens 3S integration, especially for the stage of nuclear facility design and construction, but also with ramifications for other stages of the facility life-cycle. This paper describes the SBD concept, with examples for diverse regulatory environments, being developed in the U.S under the U.S. Department of Energy (DOE) Next Generation Safeguards Initiative and the Advanced Fuel Cycle Initiative. This is compared with related international SBD work performed in the recent IAEA workshop on 揊acility Design and Plant Operation Features that Facilitate the Implementation of IAEA Safeguards. Potential future directions for further development of SBD and its integration within 3S are identified.

R. S. Bean; T. A. Bjornard; D. J. Hebdich

2009-04-01T23:59:59.000Z

220

Lighting Group: Controls: Systems Integration  

NLE Websites -- All DOE Office Websites (Extended Search)

Systems Integration Building Control Systems Integration Objective This research project investigates how diverse building control systems can be integrated to provide seamless...

Note: This page contains sample records for the topic "integration activities related" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

National Bioenergy Center Biochemical Platform Integration Project: Quarterly Update #13, October-December 2006  

DOE Green Energy (OSTI)

Volume 13 of a quarterly newsletter that describes the activities of the National Bioenergy Center's Biochemical Processing Integration Task.

Schell, D. J.

2007-01-01T23:59:59.000Z

222

National Bioenergy Center Sugar Platform Integration Project: Quarterly Update #7, April-June 2005  

DOE Green Energy (OSTI)

Volume 7 of a quarterly newsletter that describes the activities of the National Bioenergy Center's Sugar Platform Integration Project.

Not Available

2005-07-01T23:59:59.000Z

223

National Bioenergy Center Sugar Platform Integration Project: Quarterly Update #11, April-June 2006  

DOE Green Energy (OSTI)

Volume 11 of a quarterly newsletter that describes the activities of the National Bioenergy Center's Sugar Platform Integration Project.

Schell, D.

2006-07-01T23:59:59.000Z

224

National Bioenergy Center Sugar Platform Integration Project: Quarterly Update #8, July-September 2005  

Science Conference Proceedings (OSTI)

Volume 8 of a quarterly newsletter that describes the activities of the National Bioenergy Center's Sugar Platform Integration Project.

Schell, D.

2005-10-01T23:59:59.000Z

225

National Bioenergy Center Sugar Platform Integration Project: Quarterly Update #9, October-December 2005  

DOE Green Energy (OSTI)

Volume 9 of a quarterly newsletter that describes the activities of the National Bioenergy Center's Sugar Platform Integration Project.

Schell, D. J.

2006-01-01T23:59:59.000Z

226

National Bioenergy Center Sugar Platform Integration Project: Quarterly Update #10, January-March 2006  

DOE Green Energy (OSTI)

Volume 10 of a quarterly newsletter that describes the activities of the National Bioenergy Center's Sugar Platform Integration Project.

Not Available

2006-04-01T23:59:59.000Z

227

National Bioenergy Center Biochemical Platform Integration Project: Quarterly Update #14, January - March 2007  

DOE Green Energy (OSTI)

Volume 14 of a quarterly newsletter that describes the activities of the National Bioenergy Center's Biochemical Processing Integration Task.

Schell, D.

2007-04-01T23:59:59.000Z

228

National Bioenergy Center Sugar Platform Integration Project: Quarterly Update #12, July-September 2006  

DOE Green Energy (OSTI)

Volume 12 of a quarterly newsletter that describes the activities of the National Bioenergy Center's Sugar Platform Integration Project.

Schell, D.

2006-10-01T23:59:59.000Z

229

RERTR program activities related to the development and application of new LEU fuels. [Reduced Enrichment Research and Test Reactor; low-enriched uranium  

SciTech Connect

The statue of the U.S. Reduced Enrichment Research and Test Reactor (RERTR) Program is reviewed. After a brief outline of RERTR Program objectives and goals, program accomplishments are discussed with emphasis on the development, demonstration and application of new LEU fuels. Most program activities have proceeded as planned, and a combination of two silicide fuels (U/sub 3/Si/sub 2/-Al and U/sub 3/Si-Al) holds excellent promise for achieving the long-term program goals. Current plans and schedules project the uranium density of qualified RERTR fuels for plate-type reactors to grow by approximately 1 g U/cm/sup 3/ each year, from the current 1.7 g U/cm/sup 3/ to the 7.0 g U/cm/sup 3/ which will be reached in late 1988. The technical needs of research and test reactors for HEU exports are also forecasted to undergo a gradual but dramatic decline in the coming years.

Travelli, A.

1983-01-01T23:59:59.000Z

230

Activities of the National Academy of Sciences in relation to the Radiation Effects Research Foundation. Annual performance report, June 1, 1991--May 31, 1992  

SciTech Connect

This progress report relates progress in the various research projects evaluating the late health effects, both somatic and genetic, resulting from radiation exposure of the survivors of the atomic bombs at Hiroshima and Nagasaki, Japan. Considerable progress has been made in the collection and utilization of the various epidemiological data bases. These include the Life Span Study, (LSS) cohort, the Adult Health Study (AHS) cohort, the In Utero cohort, the leukemia registry and the F-1 Study population. Important progress has been made in using RERF Tumor and Tissue Registry records for evaluation of cancer incidence and radiation risk estimates for comparison with cancer mortality and risk in the LSS cohort. At the present time, a manuscript on the incidence of solid tumors (1950-1987) is undergoing internal and external review for publication as an RERF Technical report (TR) and for publication in a peer-reviewed scientific journal. In addition, manuscripts are in preparation on (1) a comprehensive report on the incidence of hematological cancers, including analysis of leukemia by cell type (1950-1987), (2) a general description of Tumor Registry operations and (3) a comparison of incidence- and mortality-based estimates of radiation risk in the LSS cohort.

Edington, C.W.

1992-06-01T23:59:59.000Z

231

Buildings to Grid Integration | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Buildings to Grid Integration Buildings to Grid Integration Buildings to Grid Integration The U.S. Department of Energy is coordinating strategies and activities with companies, individuals, and government entities to address the integration and optimization of buildings with the nation's energy grid. Buildings and the Energy Grid As electricity demand continues to increase, integrating buildings and the electricity grid is a key step to increasing energy efficiency. Intermittent and/or variable generation sources and loads, such as those of electric vehicles, are being installed on the grid in increasing numbers and at more distributed locations. For example, the U.S. government, many states, municipalities, and utility service areas are diversifying and distributing their generation mix, including a larger percentage of

232

Buildings to Grid Integration | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Buildings to Grid Integration Buildings to Grid Integration Buildings to Grid Integration The U.S. Department of Energy is coordinating strategies and activities with companies, individuals, and government entities to address the integration and optimization of buildings with the nation's energy grid. Buildings and the Energy Grid As electricity demand continues to increase, integrating buildings and the electricity grid is a key step to increasing energy efficiency. Intermittent and/or variable generation sources and loads, such as those of electric vehicles, are being installed on the grid in increasing numbers and at more distributed locations. For example, the U.S. government, many states, municipalities, and utility service areas are diversifying and distributing their generation mix, including a larger percentage of

233

Regional Profiles for Distributed Resource Integration  

Science Conference Proceedings (OSTI)

This report characterizes regional drivers and challenges for distributed resource integration. Information gathered includes research and demonstration activities being conducted to integrate distributed resources into grid and market systems. The report summarizes lessons learned from literature review, workshops, and surveys conducted by EPRI in 2009 and 2010. The information gathered through these various channels is applied in this report towards identifying regional trends, demonstration needs, and...

2010-12-31T23:59:59.000Z

234

NREL: Sustainable NREL - Energy Systems Integration Facility  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Systems Integration Facility Energy Systems Integration Facility A close-up photo of a grey and yellow research facility. The Energy Systems Integration Facility The Energy Systems Integration Facility (ESIF), designed to Platinum-level standards of U.S. Green Building Council's Leadership in Energy and Environmental Design (LEED庐), incorporates a large number of energy efficiency and sustainability practices. Researchers housed within will help overcome challenges related to the interconnection of distributed energy systems and the integration of renewable energy technologies into the electricity grid. The ESIF will also contain advanced computational capability. Fast Facts Cost: $135M Square feet: 182,500 Occupants: 205 Labs/Equipment: 14 laboratories, an Insight Visualization Center, a

235

Solar Integrated Technologies SIT | Open Energy Information  

Open Energy Info (EERE)

SIT SIT Jump to: navigation, search Name Solar Integrated Technologies (SIT) Place Los Angeles, California Zip 90058 Product California-based manufacturer and installer of PV power systems on flat roofs for relatively large-scale commercial and industrial applications and subsidiary of Energy Conversion Devices (ECD). References Solar Integrated Technologies (SIT)[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Solar Integrated Technologies (SIT) is a company located in Los Angeles, California . References 鈫 "[pointer=1&cHash=a585cf0cd0 Solar Integrated Technologies (SIT)]" Retrieved from "http://en.openei.org/w/index.php?title=Solar_Integrated_Technologies_SIT&oldid=351294

236

Definition: Network Integration Transmission Service | Open Energy  

Open Energy Info (EERE)

Network Integration Transmission Service Network Integration Transmission Service Jump to: navigation, search Dictionary.png Network Integration Transmission Service Service that allows an electric transmission customer to integrate, plan, economically dispatch and regulate its network reserves in a manner comparable to that in which the Transmission Owner serves Native Load customers.[1] Related Terms transmission lines, transmission customer, transmission line, native load, smart grid References 鈫 Glossary of Terms Used in Reliability Standards An inli LikeLike UnlikeLike You like this.Sign Up to see what your friends like. ne Glossary Definition Retrieved from "http://en.openei.org/w/index.php?title=Definition:Network_Integration_Transmission_Service&oldid=502560" Categories: Definitions

237

NREL: Transmission Grid Integration - Data and Resources  

NLE Websites -- All DOE Office Websites (Extended Search)

Data and Resources Data and Resources NREL offers the following transmission integration-related data and resources. Eastern Wind Dataset A key task of the Eastern Wind Integration and Transmission Study was to develop a dataset of three years of modeled time series wind speed and power. This dataset was designed to help energy professionals perform wind integration studies, compare potential wind sites spatially and temporally, and estimate power production from hypothetical wind plants. Western Wind Dataset A primary task of the Western Wind and Solar Integration Study was to produce a comprehensive dataset that could be used to model the build-out of potential wind plants in the Western United States. This dataset was designed to help energy professionals perform wind integration studies,

238

Integrability vs Quantum Thermalization  

E-Print Network (OSTI)

Non-integrability is often taken as a prerequisite for quantum thermalization. Still, a generally accepted definition of quantum integrability is lacking. With the basis in the driven Rabi model we discuss this careless usage of the term "integrability" in connection to quantum thermalization. The model would be classified as non-integrable according to the most commonly used definitions, for example, the only preserved quantity is the total energy. Despite this fact, a thorough analysis conjectures that the system will not thermalize. Thus, our findings suggest first of all (i) that care should be paid when linking non-integrability with thermalization, and secondly (ii) that the standardly used definitions for quantum integrability are unsatisfactory.

Jonas Larson

2013-04-12T23:59:59.000Z

239

Integrated Safety Management (ISM)  

NLE Websites -- All DOE Office Websites (Extended Search)

Integrated Safety Management Integrated Safety Management Home ISM Policy ISM Champions ISM Workshops Resources Archives Contact Us Health and Safety HSS Logo Integrated Safety Management (ISM) ism logo Welcome to the Department of Energy's Office of Health, Safety and Security (HSS) Integrated Safety Management (ISM) Web Site. The Department and its contractors remain firmly committed to ISM as first defined in 1996. The objective of ISM is to perform work in a safe and environmentally sound manner. More specifically, as described in DOE P 450.4, Safety Management System Policy: "The Department and Contractors must systematically integrate safety into management and work practices at all levels so that missions are accomplished while protecting the public, the worker, and the environment. This is to be accomplished through effective integration of safety management into all facets of work planning and execution." "

240

Advanced Integrated Systems Technology Development  

E-Print Network (OSTI)

Research Energy Systems Integration Environmentallyenergy use, combined with the capability of the BMS system, including alarms to identify anomalies. Integration

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "integration activities related" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Infrastructure for Integrated Electronics Design & ...  

Science Conference Proceedings (OSTI)

Infrastructure for Integrated Electronics Design & Manufacturing (IIEDM) Project. ... designed to support distributed supply chain integration and e ...

2010-11-05T23:59:59.000Z

242

Computer Integrated Building Processes Group  

Science Conference Proceedings (OSTI)

... Laboratory effective in October 2011, the Computer Integrated Building Processes Group ... Chris Brown) are now in the Systems Integration Division. ...

2013-07-12T23:59:59.000Z

243

Integrated Biosystems for Sustainable Development  

E-Print Network (OSTI)

Integrated biosystems for sustainable development Proceedings of the InFoRM 2000 National Workshop on Integrated

Kev Warburton; Usha Pillai-mcgarry; Deborah Ramage; No Ms; Dr. Kev Warburton

2002-01-01T23:59:59.000Z

244

Substation Data Integration  

Science Conference Proceedings (OSTI)

The purpose of the project was to implement a field demonstration of automated substation data integration. To achieve the goal of the smart grid, it will be necessary to integrate substation intelligent electronic device (IED) data into a data warehouse or data mart. Converting data to information to allow improved decision making requires automation, which is referred to as an information smart approach. The report discusses automated integration of data from substation IEDs and automated analysis of r...

2010-12-06T23:59:59.000Z

245

Integrating waste management with Job Hazard analysis  

Science Conference Proceedings (OSTI)

The web-based Automated Job Hazard Analysis (AJHA) system is a tool designed to help capture and communicate the results of the hazard review and mitigation process for specific work activities. In Fluor Hanford's day-to-day work planning and execution process, AJHA has become the focal point for integrating Integrated Safety Management (ISM) through industrial health and safety principles; environmental safety measures; and involvement by workers, subject-matter experts and management. This paper illustrates how AJHA has become a key element in involving waste-management and environmental-control professionals in planning and executing work. To support implementing requirements for waste management and environmental compliance within the core function and guiding principles of an integrated safety management system (ISMS), Fluor Hanford has developed the a computer-based application called the 'Automated Job Hazard Analysis' (AJHA), into the work management process. This web-based software tool helps integrate the knowledge of site workers, subject-matter experts, and safety principles and requirements established in standards, and regulations. AJHA facilitates a process of work site review, hazard identification, analysis, and the determination of specific work controls. The AJHA application provides a well-organized job hazard analysis report including training and staffing requirements, prerequisite actions, notifications, and specific work controls listed for each sub-task determined for the job. AJHA lists common hazards addressed in the U.S. Occupational, Safety, and Health Administration (OSHA) federal codes; and State regulations such as the Washington Industrial Safety and Health Administration (WISHA). AJHA also lists extraordinary hazards that are unique to a particular industry sector, such as radiological hazards and waste management. The work-planning team evaluates the scope of work and reviews the work site to identify potential hazards. Hazards relevant to the work activity being analyzed are selected from the listing provided in AJHA. The work team can also enter one-time hazards unique to the work activity. Because AJHA is web based, it can be taken into the field during site walk-downs using wireless or cell- phone technologies. Once hazards are selected, AJHA automatically lists mandatory and optional controls, based on the referenced codes and good work practices. The hazards selected may also require that additional specific analysis be performed, focusing on the unique characteristics of the job being analyzed. For example, the physical characteristics, packaging, handling, and disposal requirements for a specific waste type. The work team then evaluates the identified hazards and related controls and adds details as needed for the specific work activity being analyzed. The selection of relevant hazards also triggers required reviews by subject-matter experts (SMEs) and the on-line completion of necessary forms and permits. The details of the hazard analysis are reviewed on line or in a work- team group setting. SME approvals are entered on-line and are published in the job hazard analysis report. (authors)

NONE

2007-07-01T23:59:59.000Z

246

Integrated Computational Materials Education  

Science Conference Proceedings (OSTI)

This short course is based on the Summer School for Integrated Computational Materials Education, which was developed to meet this need. We will present a...

247

Software Component Integration Testing  

Science Conference Proceedings (OSTI)

... a combination of off-the-shelf components, with new components integrated to satisfy ... oriented, that is, it consists of objects with state and behavior. ...

2011-12-02T23:59:59.000Z

248

Grid Integration Group  

NLE Websites -- All DOE Office Websites (Extended Search)

Grid Integration Group The Demand Response Research Center (DRRC) conducts research that advances the near-term adoption of demand response (DR) technologies, policies, programs,...

249

Integrated waste management.  

E-Print Network (OSTI)

??Integrated waste management is considered from a systems approach, with a particular emphasis on advancing sustainability. The focus of the thesis is to examine the (more)

Seadon, Jeffrey Keith

2010-01-01T23:59:59.000Z

250

MHD Integrated Topping Cycle Project  

DOE Green Energy (OSTI)

This seventeenth quarterly technical progress report of the MHD Integrated Topping Cycle Project presents the accomplishments during the period August 1, 1991 to October 31, 1991. Manufacturing of the prototypical combustor pressure shell has been completed including leak, proof, and assembly fit checking. Manufacturing of forty-five cooling panels was also completed including leak, proof, and flow testing. All precombustor internal components (combustion can baffle and swirl box) were received and checked, and integration of the components was initiated. A decision was made regarding the primary and backup designs for the 1A4 channel. The assembly of the channel related prototypical hardware continued. The cathode wall electrical wiring is now complete. The mechanical design of the diffuser has been completed.

Not Available

1992-07-01T23:59:59.000Z

251

FCT Technology Validation: Integrated Projects  

NLE Websites -- All DOE Office Websites (Extended Search)

Integrated Projects to Integrated Projects to someone by E-mail Share FCT Technology Validation: Integrated Projects on Facebook Tweet about FCT Technology Validation: Integrated Projects on Twitter Bookmark FCT Technology Validation: Integrated Projects on Google Bookmark FCT Technology Validation: Integrated Projects on Delicious Rank FCT Technology Validation: Integrated Projects on Digg Find More places to share FCT Technology Validation: Integrated Projects on AddThis.com... Home Transportation Projects Stationary/Distributed Generation Projects Integrated Projects DOE Projects Non-DOE Projects Quick Links Hydrogen Production Hydrogen Delivery Hydrogen Storage Fuel Cells Manufacturing Codes & Standards Education Systems Analysis Contacts Integrated Projects To maximize overall system efficiencies, reduce costs, and optimize

252

Systems Integration (Fact Sheet)  

DOE Green Energy (OSTI)

The Systems Integration (SI) subprogram works closely with industry, universities, and the national laboratories to overcome technical barriers to the large-scale deployment of solar technologies. To support these goals, the subprogram invests primarily in four areas: grid integration, technology validation, solar resource assessment, and balance of system development.

Not Available

2011-10-01T23:59:59.000Z

253

Integration of hydrothermal-energy economics: related quantitative studies  

DOE Green Energy (OSTI)

A comparison of ten models for computing the cost of hydrothermal energy is presented. This comparison involved a detailed examination of a number of technical and economic parameters of the various quantitative models with the objective of identifying the most important parameters in the context of accurate estimates of cost of hydrothermal energy. Important features of various models, such as focus of study, applications, marked sectors covered, methodology, input data requirements, and output are compared in the document. A detailed sensitivity analysis of all the important engineering and economic parameters is carried out to determine the effect of non-consideration of individual parameters.

Not Available

1982-08-01T23:59:59.000Z

254

Integrating Rhetorical-Semantic Relation Models for Query ...  

Science Conference Proceedings (OSTI)

... In Galia Angelova, Kalina Bontcheva, Ruslan Mitkov, Nicolas Nicolov, and Nikolai Nikolov, editors, Proceed- ings of the International Conference ...

2006-10-03T23:59:59.000Z

255

NEDO Research Related to Battery Storage Applications for Integration...  

Open Energy Info (EERE)

TOOL Name: Spain Installed Wind Capacity Website Focus Area: Renewable Energy Topics: Market Analysis Website: www.gwec.netindex.php?id131 Equivalent URI:...

256

Building Technologies Office: Air-Source Integrated Heat Pump Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Air-Source Integrated Air-Source Integrated Heat Pump Research Project to someone by E-mail Share Building Technologies Office: Air-Source Integrated Heat Pump Research Project on Facebook Tweet about Building Technologies Office: Air-Source Integrated Heat Pump Research Project on Twitter Bookmark Building Technologies Office: Air-Source Integrated Heat Pump Research Project on Google Bookmark Building Technologies Office: Air-Source Integrated Heat Pump Research Project on Delicious Rank Building Technologies Office: Air-Source Integrated Heat Pump Research Project on Digg Find More places to share Building Technologies Office: Air-Source Integrated Heat Pump Research Project on AddThis.com... About Take Action to Save Energy Partner with DOE Activities Appliances Research Building Envelope Research

257

Berkeley Lab Public Affairs: Community Relations Activities  

NLE Websites -- All DOE Office Websites (Extended Search)

National Energy Research Scientific Computing Center (NERSC) in Oakland, and the Potter Street biosciences research center. Education Program at SC Conference (Supercomputing)...

258

Advanced Vehicle Testing Activity - Related Links  

NLE Websites -- All DOE Office Websites (Extended Search)

and Systems DOE Programs and Offices: EPAct Fleet Information and Regulations Alternative Fuels Data Center Clean Cities Program U.S. Department of Energy U.S....

259

Mastery of sixth grade TEKS objectives through integrated learning  

E-Print Network (OSTI)

The purpose of this study was to assess learning in sixth grade students? by gain scores in science and mathematics while participating in the integrative curriculum modules developed by the Partnership for Environmental Education and Rural Health (PEER) Program. The PEER Program is a collaboration between the College of Education and Applied Sciences, and the College of Veterinary Medicine at Texas A&M University. Two Integrated Curricular Modules provided the experimental treatment in this study. The alliance of the PEER Program and Texas A&M University has developed a middle school integrated curriculum based on sixth grade mathematics, science, English, reading and social studies TEKS (Texas Essential Knowledge and Skills)-based objectives. This multimedia curriculum incorporates the five disciplines into an adventure narrative featuring characters similar in dynamics to its targeted population, with problem-solving activities aimed to spark learning interests of students and emphasize skill development. Integrated learning allows students an alternative method to traditional or conventional ways of learning by conceptualizing the subject matter into more than one medium. Selected students who participated in this study were pre-tested with Texas Assessment of Knowledge and Skills (TAKS)-related instrumentation based on TEKS objectives. Their scores were recorded and some students were then selected to participate as the treatment group where they were taught the PEER Program?s integrated curriculum, patterned to correspond to TEKS? objectives. Post-tests were administered to both groups, and gain scores were collected to evaluate and determine if there was evidence that the PEER Program was successful in improving the mastery of the TEKS objectives in mathematics and science. Results varied in this study with findings that supported the notions that the integrated PEER experimental modules had a positive, negative, and no effect on the experimental populations compared to the control, or untreated population. It is inconclusive to whether the integrated modules were effective in raising and improving test scores based on the preparatory curriculum. Inconsistencies in the results from this study imply that further research is needed.

Trevino-Anderson, Monika Raquel

2004-12-01T23:59:59.000Z

260

DOE Hydrogen and Fuel Cells Program: Systems Integration  

NLE Websites -- All DOE Office Websites (Extended Search)

Independent Reviews Independent Reviews Macro-System Model U.S. Department of Energy Search help Home > Systems Integration Printable Version Systems Integration The technological advancements and lessons learned through research, development, and demonstration of hydrogen and fuel cell technologies must be integrated to work as a fully functional system. This is the focus of systems integration-understanding the complex interactions between components, systems costs, environmental impacts, societal impacts, and system trade-offs. Identifying and analyzing these interactions will enable evaluation of alternative concepts and pathways, and result in well-integrated and optimized hydrogen and fuel cell systems. Led by the Office of Energy Efficiency and Renewable Energy, this activity

Note: This page contains sample records for the topic "integration activities related" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Integrated assessment briefs  

Science Conference Proceedings (OSTI)

Integrated assessment can be used to evaluate and clarify resource management policy options and outcomes for decision makers. The defining characteristics of integrated assessment are (1) focus on providing information and analysis that can be understood and used by decision makers rather than for merely advancing understanding and (2) its multidisciplinary approach, using methods, styles of study, and considerations from a broader variety of technical areas than would typically characterize studies produced from a single disciplinary standpoint. Integrated assessment may combine scientific, social, economic, health, and environmental data and models. Integrated assessment requires bridging the gap between science and policy considerations. Because not everything can be valued using a single metric, such as a dollar value, the integrated assessment process also involves evaluating trade-offs among dissimilar attributes. Scientists at Oak Ridge National Laboratory (ORNL) recognized the importance and value of multidisciplinary approaches to solving environmental problems early on and have pioneered the development of tools and methods for integrated assessment over the past three decades. Major examples of ORNL`s experience in the development of its capabilities for integrated assessment are given.

NONE

1995-04-01T23:59:59.000Z

262

Relative Corrosivity  

Science Conference Proceedings (OSTI)

Table 3聽聽聽Measured atmospheric-corrosion rates for steel and zinc...Relative corrosivity Steel Zinc 1 Normal Wells, Northwest Territory Rural 0.02 0.2 2 Saskatoon, Saskatchewan Rural 0.2 0.2 9 State College, PA (a) Rural 1.0 1.0 17 Pittsburgh, PA (roof) Industrial 1.8 1.5 18 London (Battersea), U.K. Industrial 2.0 1.2 27 Bayonne, NJ Industrial 3.4 3.1 28 Kure...

263

On Quantum Integrable Systems  

SciTech Connect

Many quantum integrable systems are obtained using an accelerator physics technique known as Ermakov (or normalized variables) transformation. This technique was used to create classical nonlinear integrable lattices for accelerators and nonlinear integrable plasma traps. Now, all classical results are carried over to a nonrelativistic quantum case. In this paper we have described an extension of the Ermakov-like transformation to the Schroedinger and Pauli equations. It is shown that these newly found transformations create a vast variety of time dependent quantum equations that can be solved in analytic functions, or, at least, can be reduced to time-independent ones.

Danilov, Viatcheslav; /Oak Ridge; Nagaitsev, Sergei; /Fermilab

2011-11-01T23:59:59.000Z

264

ELECTRONIC INTEGRATING CIRCUIT  

DOE Patents (OSTI)

An electronic integrating circuit using a transistor with a capacitor connected between the emitter and collector through which the capacitor discharges at a rate proportional to the input current at the base is described. Means are provided for biasing the base with an operating bias and for applying a voltage pulse to the capacitor for charging to an initial voltage. A current dividing diode is connected between the base and emitter of the transistor, and signal input terminal means are coupled to the juncture of the capacitor and emitter and to the base of the transistor. At the end of the integration period, the residual voltage on said capacitor is less by an amount proportional to the integral of the input signal. Either continuous or intermittent periods of integration are provided. (AEC)

Englemann, R.H.

1963-08-20T23:59:59.000Z

265

Bioluminescent Bioreporter Integrated Circuits  

To address the need for fieldable real-time biological recognition systems, ORNL researchers developed a "laboratory on a chip" using genetically engineered whole cell biosensors attached to integrated circuits (ICs). These bioluminescent ...

266

Integrated optical isolators  

E-Print Network (OSTI)

Introduction: Optical isolators are important components in lasers. Their main function is to eliminate noise caused by back-reflections into these lasers. The need for integrated isolators comes from the continuing growth ...

Zaman, Tauhid R

2005-01-01T23:59:59.000Z

267

Hanford Tank Integrity Project  

Jordan Follett DST Project Plan and SST Use jordan_r_follet@rl.gov Rick Rast Structural Lead richard_s_rast@rl.gov Ted Venetz SST Integrity Lead theodore_j_venetz@rl.gov

268

Integrated Project Team RM  

Energy.gov (U.S. Department of Energy (DOE))

The Integrated Project Team (IPT) is an essential element of the Department抯 acquisition process and will be utilized during all phases of a project life cycle. The IPT is a team of professionals...

269

Wellbore Integrity Network  

SciTech Connect

In this presentation, we review the current state of knowledge on wellbore integrity as developed in the IEA Greenhouse Gas Programme's Wellbore Integrity Network. Wells are one of the primary risks to the successful implementation of CO{sub 2} storage programs. Experimental studies show that wellbore materials react with CO{sub 2} (carbonation of cement and corrosion of steel) but the impact on zonal isolation is unclear. Field studies of wells in CO{sub 2}-bearing fields show that CO{sub 2} does migrate external to casing. However, rates and amounts of CO{sub 2} have not been quantified. At the decade time scale, wellbore integrity is driven by construction quality and geomechanical processes. Over longer time-scales (> 100 years), chemical processes (cement degradation and corrosion) become more important, but competing geomechanical processes may preserve wellbore integrity.

Carey, James W. [Los Alamos National Laboratory; Bachu, Stefan [Alberta Innovates

2012-06-21T23:59:59.000Z

270

Integrated XML Document Management  

Science Conference Proceedings (OSTI)

XML has become a widely accepted data format for exchange and representation of semi-structured data. Efficiently managing XML as well as traditional business documents and content in an integrated fashion is a necessity for companies to be successful ...

Hui-I Hsiao; Joshua Hui; Ning Li; Parag Tijare

2003-01-01T23:59:59.000Z

271

Extended Enterprise Integration  

Science Conference Proceedings (OSTI)

This paper discusses the competitive pressures forcing major organisations to co-operate ever more closely in designing, manufacturing and supporting new products and major assets. It explains the resulting business and integration issues and presents ...

J. Gunn

2000-04-01T23:59:59.000Z

272

SunShot Initiative: Systems Integration  

NLE Websites -- All DOE Office Websites (Extended Search)

Systems Integration Systems Integration High Penetration Solar Portal The High Penetration Solar Portal has timely information related to high penetration solar scenarios and integrating solar into the grid. The site allows utilities, grant awardees, regulators, researchers, and other solar professionals can easily share data, case studies, lessons learned, and demonstration project findings. Photo of power lines. Transmission line access is one challenge facing new utility-scale solar installations in the U.S. Photo by Dennis Schroeder, NREL 18981 Through the SunShot Initiative, the U.S. Department of Energy (DOE) supports the development of innovative, cost-effective solutions that allow increasing amounts of solar energy to integrate seamlessly with the national power grid while mitigating associated risks and reducing system costs. Such solutions will help achieve the SunShot goals by ensuring system reliability and encouraging the widespread deployment of solar technologies, such as photovoltaics and concentrating solar power.

273

Legacy model integration with repast simphony.  

SciTech Connect

Repast is a widely used, free, and open-source, agent-based modeling and simulation toolkit. Three Repast version 3 platforms are currently available, each of which has the same core features but with differing environments for these features. Repast Simphony (Repast S) extends the Repast 3 portfolio by offering a new approach to simulation development and execution. Repast S's new simulation development capabilities include direct support for integrating existing (i.e., legacy) file-based models into agent-based simulations. This paper reviews related work on model integration and data exchange; introduces the Repast S's legacy model integration system; and discusses how the new system can be used to integrate existing file-based models, either agent-based or nonagent-based, into agent models.

North, M. J.; Sydelko, P. J.; Vos, J. R.; Howe, T. R.; Collier, N. T.; Decision and Information Sciences; Univ. of Chicago; Univ. of Illinois; PantaRei Corp.

2006-01-01T23:59:59.000Z

274

Integrated Safety Management Policy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

INTEGRATED SAFETY INTEGRATED SAFETY MANAGEMENT SYSTEM DESCRIPTION U.S. DEPARTMENT OF ENERGY Office of Environmental Management Headquarters May 2008 Preparation: Braj K. sin& Occupational Safety and Health Manager Office of Safety Management Concurrence: Chuan-Fu wu Director, Offlce of Safety Management Deputy Assistant Secretary for safe& Management andoperations Operations Officer for 1 Environmental Management Approval: Date p/-g Date Environmental Management TABLE OF CONTENTS ACRONYMS................................................................................................................................................................v EXECUTIVE SUMMARY .........................................................................................................................................1

275

NREL: Distributed Grid Integration - Solar Distributed Grid Integration  

NLE Websites -- All DOE Office Websites (Extended Search)

Solar Distributed Grid Integration Projects Solar Distributed Grid Integration Projects NREL provides grid integration support, system-level testing, and systems analysis for DOE's Solar Distributed Grid Integration Projects supported by the SunShot Initiative. These projects address technical issues and develop solutions for high penetration grid integration of solar technologies into the electric power system to meet the following goals: Reduce cost: reduce interconnection costs by developing streamlined procedures including advanced integration models for utility interconnection of photovoltaics (PV) Reduce market barriers: work with utilities and system integrators to reduce market barriers by providing research on impacts of integration of high penetration of PV systems and developing solutions.

276

Integrating the Integrators - A Roadmap to Success  

SciTech Connect

The U.S. Department of Energy Environmental Management's (DOE-EM) investments in science and technology, as well as science and technology investments associated with other parts of the DOE are aimed at meeting the Departments cleanup goals. These investments, primarily focused on EM's cleanup mission, comprise the Environmental Quality Research and Development (R&D) portfolios. Synchronizing EM's Cleanup Project Managers (operations facility and process owners throughout the DOE complex) operational needs with EM R&D including the extensive work of the six Focus Areas (major thrust areas within DOE-EM) has been a continuing challenge. This recent initiative to better integrate the R&D program is in response to evolving needs within the Department to apply proven system engineering methods to clarify requirements and define EM's process to effectively orchestrate their R&D Program. To optimize this partnership, DOE-EM's Integration Program is successfully unifying the operational needs with the R&D as described in this paper.

Olson, Craig Stott; Conner, Craig C

1999-03-01T23:59:59.000Z

277

Integrating the Integrators - A Roadmap to Success  

SciTech Connect

The U.S. Department of Energy Environmental Management's (DOE-EM) investments in science and technology, as well as science and technology investments associated with other parts of the DOE are aimed at meeting the Departments cleanup goals. These investments, primarily focused on EM's cleanup mission, comprise the Environmental Quality Research and Development (R&D) portfolios. Synchronizing EM's Cleanup Project Managers (operations facility and process owners throughout the DOE complex) operational needs with EM R&D including the extensive work of the six Focus Areas (major thrust areas within DOE-EM) has been a continuing challenge. This recent initiative to better integrate the R&D program is in response to evolving needs within the Department to apply proven systems engineering methods to clarify requirements and define EM's process to effectively orchestrate their R&D Program. To optimize this partnership, DOE-EM's Integration Program is successfully unifying the operational needs with the R&D as described in this paper.

C. Conner; C. Olson

1999-02-01T23:59:59.000Z

278

NREL: Energy Systems Integration - Webmaster  

NLE Websites -- All DOE Office Websites (Extended Search)

Your name: Your email address: Your message: Send Message Printable Version Energy Systems Integration Home Research & Development Energy Systems Integration Facility Working...

279

Integrity Automotive | Open Energy Information  

Open Energy Info (EERE)

Automotive Jump to: navigation, search Name Integrity Automotive Place Kentucky Product Joint venture between Kentucky businessman Randal Waldman of Integrity Manufacturing and...

280

Integrated curriculum: art as catalyst.  

E-Print Network (OSTI)

??An arts based integrated curriculum plan is what resulted from a look at integrated curriculum and the advantages it has for student learning and success. (more)

Kiser, Elizabeth

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "integration activities related" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

NREL: Transmission Grid Integration - Projects  

NLE Websites -- All DOE Office Websites (Extended Search)

Generation Integration Study Oahu Wind Integration and Transmission SIND Toolkit Electricity Market Design Energy Imbalance Markets Flexible Energy Scheduling Tool for...

282

SRS Tank Structural Integrity Program  

integrity management, such as those captured in the SRS and Hanford Structural Integrity Charts, and not isolated to just NDE concerns.

283

Integrated Safety Management Workshop Registration, PIA, Idaho...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Integrated Safety Management Workshop Registration, PIA, Idaho National Laboratory Integrated Safety Management Workshop Registration, PIA, Idaho National Laboratory Integrated...

284

Integrity Lessons from the WAAS Integrity Performance Panel (WIPP)  

E-Print Network (OSTI)

Integrity Lessons from the WAAS Integrity Performance Panel (WIPP) Todd Walter, Per Enge, Stanford that the integrity requirement would be met, the FAA formed the WAAS Integrity Performance Panel (WIPP). The role of the WIPP is to independently assess the safety of WAAS and to recommend system improvements. To accomplish

Stanford University

285

Integrated Micro Nano Systems Integrated Micro Nano Systems  

E-Print Network (OSTI)

#12;Integrated Micro Nano Systems 2 #12;Integrated Micro Nano Systems 3 Val Jones (Ed.) Symposium on Integrated Micro Nano Systems: Convergence of bio and nanotechnologies, Enschede, The Netherlands, June 2006 Micro Nano Systems 4 #12;Integrated Micro Nano Systems 5 Preface In order to explore the convergence

Al Hanbali, Ahmad

286

Energy Systems Integration Laboratory (Fact Sheet)  

Science Conference Proceedings (OSTI)

This fact sheet describes the purpose, lab specifications, applications scenarios, and information on how to partner with NREL's Energy Systems Integration Laboratory at the Energy Systems Integration Facility. The Energy Systems Integration Laboratory at NREL's Energy Systems Integration Facility (ESIF) provides a flexible, renewable-ready platform for research, development, and testing of state-of-the-art hydrogen-based and other energy storage systems. The main focus of the laboratory is assessment of the technical readiness, performance characterization, and research to help industry move these systems towards optimal renewable-based production and efficient utilization of hydrogen. Research conducted in the Energy Systems Integration Laboratory will advance engineering knowledge and market deployment of hydrogen technologies to support a growing need for versatile distributed electricity generation, applications in microgrids, energy storage for renewables integration, and home and station-based hydrogen vehicle fueling. Research activities are targeted to improve the technical readiness of the following: (1) Low and high temperature electrolyzers, reformers and fuel cells; (2) Mechanical and electrochemical compression systems; (3) Hydrogen storage; (4) Hydrogen vehicle refueling; and (5) Internal combustion or turbine technology for electricity production. Examples of experiments include: (1) Close- and direct-coupling of renewable energy sources (PV and wind) to electrolyzers; (2) Performance and efficiency validation of electrolyzers, fuel cells, and compressors; (3) Reliability and durability tracking and prediction; (4) Equipment modeling and validation testing; (5) Internal combustion or turbine technology for electricity production; and (6) Safety and code compliance.

Not Available

2011-10-01T23:59:59.000Z

287

Clean Coal Program Research Activities  

Science Conference Proceedings (OSTI)

Although remarkable progress has been made in developing technologies for the clean and efficient utilization of coal, the biggest challenge in the utilization of coal is still the protection of the environment. Specifically, electric utilities face increasingly stringent restriction on the emissions of NO{sub x} and SO{sub x}, new mercury emission standards, and mounting pressure for the mitigation of CO{sub 2} emissions, an environmental challenge that is greater than any they have previously faced. The Utah Clean Coal Program addressed issues related to innovations for existing power plants including retrofit technologies for carbon capture and sequestration (CCS) or green field plants with CCS. The Program focused on the following areas: simulation, mercury control, oxycoal combustion, gasification, sequestration, chemical looping combustion, materials investigations and student research experiences. The goal of this program was to begin to integrate the experimental and simulation activities and to partner with NETL researchers to integrate the Program's results with those at NETL, using simulation as the vehicle for integration and innovation. The investigators also committed to training students in coal utilization technology tuned to the environmental constraints that we face in the future; to this end the Program supported approximately 12 graduate students toward the completion of their graduate degree in addition to numerous undergraduate students. With the increased importance of coal for energy independence, training of graduate and undergraduate students in the development of new technologies is critical.

Larry Baxter; Eric Eddings; Thomas Fletcher; Kerry Kelly; JoAnn Lighty; Ronald Pugmire; Adel Sarofim; Geoffrey Silcox; Phillip Smith; Jeremy Thornock; Jost Wendt; Kevin Whitty

2009-03-31T23:59:59.000Z

288

Integrating Management Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Mission Execution by Mission Execution by Integrating our Management Systems Integrating our Management Systems 1 W e e k l y O p e r a t i o n s M e e t i n g N o v e m b e r 1 , 2 0 1 1 M i c h a e l J . W e i s Pulling the Pieces Together for Improving DOE Management to Enable Mission Execution 2 飩 Process changes Process changes 飩 Behavioral changes Behavioral changes 飩 System changes System changes Process Change Approach Strengthening and Expediting Decision Making 3 Proposed Outcomes Horizontal Integration Incoming DOE Business Crosscutting Issues (i.e. NLDC input) Hi-level Roadblocks Operations Management Council Associate Deputy Secretary Collaborative Action Process Chief Operating Officer Weekly Operations Council (OMC) Super 8 Secretary (ADS) (CAP) Board (COOB) p Meeting Endorsement / Commitment Super 8 US Meetings COO Meetings

289

Integrating Program Component Executables  

NLE Websites -- All DOE Office Websites (Extended Search)

Integrating Integrating Program Component Executables on Distributed Memory Architectures via MPH Chris Ding and Yun He Computational Research Division, Lawrence Berkeley National Laboratory University of California, Berkeley, CA 94720, USA chqding@lbl.gov, yhe@lbl.gov Abstract A growing trend in developing large and complex ap- plications on today's Teraflop computers is to integrate stand-alone and/or semi-independent program components into a comprehensive simulation package. One example is the climate system model which consists of atmosphere, ocean, land-surface and sea-ice. Each component is semi- independent and has been developed at different institu- tions. We study how this multi-component multi-executable application can run effectively on distributed memory archi- tectures. We identify five effective execution modes and de- velop the MPH library to support

290

Hanford Site waste treatment/storage/disposal integration  

SciTech Connect

In 1998 Waste Management Federal Services of Hanford, Inc. began the integration of all low-level waste, mixed waste, and TRU waste-generating activities across the Hanford site. With seven contractors, dozens of generating units, and hundreds of waste streams, integration was necessary to provide acute waste forecasting and planning for future treatment activities. This integration effort provides disposition maps that account for waste from generation, through processing, treatment and final waste disposal. The integration effort covers generating facilities from the present through the life-cycle, including transition and deactivation. The effort is patterned after the very successful DOE Complex EM Integration effort. Although still in the preliminary stages, the comprehensive onsite integration effort has already reaped benefits. These include identifying significant waste streams that had not been forecast, identifying opportunities for consolidating activities and services to accelerate schedule or save money; and identifying waste streams which currently have no path forward in the planning baseline. Consolidation/integration of planned activities may also provide opportunities for pollution prevention and/or avoidance of secondary waste generation. A workshop was held to review the waste disposition maps, and to identify opportunities with potential cost or schedule savings. Another workshop may be held to follow up on some of the long-term integration opportunities. A change to the Hanford waste forecast data call would help to align the Solid Waste Forecast with the new disposition maps.

MCDONALD, K.M.

1999-02-24T23:59:59.000Z

291

Update on DOE Integrated Energy Systems Projects  

E-Print Network (OSTI)

The Integrated Energy Systems Program, Office of Industrial Programs U. S. Department of Energy has responsibilities in diverse areas of Industrial Energy Conservation. These activities include Energy Analysis and Diagnostic Centers (EADC) providing energy audit support to small and medium sized manufacturing plants, technology transfer support in conjunction with industrial sector companies and trade associations, funding and direction of the Energy Integrated Farm program, administration of the Industrial Energy Efficiency Improvement Program, and the Industrial Sector Technology Use Model (ISTUM). Recent technology transfer activity with the major industrial trade associations and manufacturing firms has been for the development of industrial energy conservation guides, publication of association conservation seminar proceedings, and cooperative assistance in selected projects designed to enhance conservation in industrial manufacturing activities. This paper briefly describes specific federal industrial conservation program achievements and current and planned technology transfer and industrial conservation projects extending into 1986.

Williams, T. E., Jr.

1984-01-01T23:59:59.000Z

292

Commercial Buildings Integration Program  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Buildings Buildings Integration Program Arah Schuur Program Manager arah.schuur@ee.doe.gov April 2, 2013 Building Technologies Office Program Peer Review 2 | Building Technologies Office eere.energy.gov Vision Commercial buildings are constructed, operated, renovated and transacted with energy performance in mind and net zero ready commercial buildings are common and cost-effective. Commercial Buildings Integration Program Mission Accelerate voluntary uptake of significant energy performance improvements in existing and new commercial buildings. 3 | Building Technologies Office eere.energy.gov BTO Goals: BTO supports the development and deployment of technologies and systems to reduce

293

Integrated system design report  

DOE Green Energy (OSTI)

The primary objective of the integrated system test phase is to demonstrate the commercial potential of a coal fueled diesel engine in its actual operating environment. The integrated system in this project is defined as a coal fueled diesel locomotive. This locomotive, shown on drawing 41D715542, is described in the separate Concept Design Report. The test locomotive will be converted from an existing oil fueled diesel locomotive in three stages, until it nearly emulates the concept locomotive. Design drawings of locomotive components (diesel engine, locomotive, flatcar, etc.) are included.

Not Available

1989-07-01T23:59:59.000Z

294

Integrated heterodyne terahertz transceiver  

DOE Patents (OSTI)

A heterodyne terahertz transceiver comprises a quantum cascade laser that is integrated on-chip with a Schottky diode mixer. An antenna connected to the Schottky diode receives a terahertz signal. The quantum cascade laser couples terahertz local oscillator power to the Schottky diode to mix with the received terahertz signal to provide an intermediate frequency output signal. The fully integrated transceiver optimizes power efficiency, sensitivity, compactness, and reliability. The transceiver can be used in compact, fieldable systems covering a wide variety of deployable applications not possible with existing technology.

Lee, Mark (Albuquerque, NM); Wanke, Michael C. (Albuquerque, NM)

2009-06-23T23:59:59.000Z

295

Smart Grid Integration Laboratory  

Science Conference Proceedings (OSTI)

The initial federal funding for the Colorado State University Smart Grid Integration Laboratory is through a Congressionally Directed Project (CDP), DE-OE0000070 Smart Grid Integration Laboratory. The original program requested in three one-year increments for staff acquisition, curriculum development, and instrumentation ?? all which will benefit the Laboratory. This report focuses on the initial phase of staff acquisition which was directed and administered by DOE NETL/ West Virginia under Project Officer Tom George. Using this CDP funding, we have developed the leadership and intellectual capacity for the SGIC. This was accomplished by investing (hiring) a core team of Smart Grid Systems engineering faculty focused on education, research, and innovation of a secure and smart grid infrastructure. The Smart Grid Integration Laboratory will be housed with the separately funded Integrid Laboratory as part of CSU??s overall Smart Grid Integration Center (SGIC). The period of performance of this grant was 10/1/2009 to 9/30/2011 which included one no cost extension due to time delays in faculty hiring. The Smart Grid Integration Laboratory??s focus is to build foundations to help graduate and undergraduates acquire systems engineering knowledge; conduct innovative research; and team externally with grid smart organizations. Using the results of the separately funded Smart Grid Workforce Education Workshop (May 2009) sponsored by the City of Fort Collins, Northern Colorado Clean Energy Cluster, Colorado State University Continuing Education, Spirae, and Siemens has been used to guide the hiring of faculty, program curriculum and education plan. This project develops faculty leaders with the intellectual capacity to inspire its students to become leaders that substantially contribute to the development and maintenance of Smart Grid infrastructure through topics such as: (1) Distributed energy systems modeling and control; (2) Energy and power conversion; (3) Simulation of electrical power distribution system that integrates significant quantities of renewable and distributed energy resources; (4) System dynamic modeling that considers end-user behavior, economics, security and regulatory frameworks; (5) Best practices for energy management IT control solutions for effective distributed energy integration (including security with the underlying physical power systems); (6) Experimental verification of effects of various arrangements of renewable generation, distributed generation and user load types along with conventional generation and transmission. Understanding the core technologies for enabling them to be used in an integrated fashion within a distribution network remains is a benefit to the future energy paradigm and future and present energy engineers.

Wade Troxell

2011-09-30T23:59:59.000Z

296

NREL: Process Development and Integration Laboratory - Atmospheric  

NLE Websites -- All DOE Office Websites (Extended Search)

Atmospheric Processing Platform Capabilities Atmospheric Processing Platform Capabilities The Atmospheric Processing platform in the Process Development and Integration Laboratory offers powerful capabilities with integrated tools for depositing, processing, and characterizing photovoltaic materials and devices. In particular, this platform focuses on different methods to deposit ("write") materials onto a variety of substrates and then further process into optoelectronic materials using rapid thermal processing. You can read more on the rationale for developing this platform and its capabilities. Contact Maikel van Hest for more details on these capabilities. The Atmospheric Processing platform will allow deposition in any sequence and is applicable to activities in all Technology Roadmaps, which include

297

Hamiltonian systems and symplectic integrators  

Science Conference Proceedings (OSTI)

Keywords: Hamiltonian systems, Runge-Kutta type methods, conservation of energy, symplectic integrators, symplectic stability

Peter G鰎tz; Rudolf Scherer

1997-12-01T23:59:59.000Z

298

CNST Researchers Develop Integrated Nanomechanical ...  

Science Conference Proceedings (OSTI)

CNST Researchers Develop Integrated Nanomechanical Sensor for Atomic Force Microscopy. June 1, 2011. ...

2011-06-01T23:59:59.000Z

299

Security Outreach and Integration Group  

Science Conference Proceedings (OSTI)

Security Outreach and Integration Group. Welcome. The US economy, citizens, and government rely on information technology. ...

2013-01-17T23:59:59.000Z

300

The Track Integrated Kinetic Energy of Atlantic Tropical Cyclones  

Science Conference Proceedings (OSTI)

In this paper the concept of track integrated kinetic energy (TIKE) is introduced as a measure of seasonal Atlantic tropical cyclone activity and applied to seasonal variability in the Atlantic. It is similar in concept to the more commonly used ...

V. Misra; S. DiNapoli; M. Powell

2013-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "integration activities related" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

An integrated multibody dynamics for land and marine transportation systems  

Science Conference Proceedings (OSTI)

Design of multipurpose, high mobility transportation system requires an effective integration of land, marine and space vehicles simulation. This integration poses many technical and operational requirement challenges during conceptual design, analysis, ... Keywords: dynamics, high mobility, multibody, multipurpose, operational scenarios, relative motions

Ashraf Zeid; Ly D. Nguyen

2010-07-01T23:59:59.000Z

302

Discontinuous Function Integration  

NLE Websites -- All DOE Office Websites (Extended Search)

Discontinuous Function Integration Discontinuous Function Integration Name: Clarence Status: student Grade: 9-12 Location: CA Country: USA Date: Winter 2011-2012 Question: We know that the area under a continuous function on a certain interval, for instance, [a,b], can be found out by definite integration (taking limit of a sum of areas of rectangles). But when the curve is a discontinuous function, the limit does not exist and is not independent of the choice of the height of rectangle in each delta x. Does it mean that the height in an interval delta x including f(x) of undefined value can be any value so that a limiting value (area under the curve) does not exist? Replies: If I understand your question correctly, here is a way out. The limits of integration are divided into sections [x1,y1] to [x2,y2] over which the function is continuous. Then the next section [x2,y2] to [x3,y3] over which the function is continuous is added to the first section. You can carry this on as long as you need to include each of the separate segments. That is not so hard, but I am not completely sure that is what you are asking. There are some pathological functions where this pasting together does not work so well.

303

Integrated Management Requirements mapping  

Science Conference Proceedings (OSTI)

This document contains five appendices documenting how Sandia implemented the DOE Conduct of Operations (5480.19) and DOE Quality Assurance (5700.6C) orders. It provides a mapping of the Sandia integrated requirements to the specific requirements of each Order and a mapping to Sandia's approved program for implementing the Conduct of Operations Order.

Holmes, J.T.; Andrews, N.S.

1992-06-01T23:59:59.000Z

304

Bioluminescent bioreporter integrated circuit  

DOE Patents (OSTI)

Disclosed are monolithic bioelectronic devices comprising a bioreporter and an OASIC. These bioluminescent bioreporter integrated circuit are useful in detecting substances such as pollutants, explosives, and heavy-metals residing in inhospitable areas such as groundwater, industrial process vessels, and battlefields. Also disclosed are methods and apparatus for environmental pollutant detection, oil exploration, drug discovery, industrial process control, and hazardous chemical monitoring.

Simpson, Michael L. (Knoxville, TN); Sayler, Gary S. (Blaine, TN); Paulus, Michael J. (Knoxville, TN)

2000-01-01T23:59:59.000Z

305

Data Integration Data Analysis  

E-Print Network (OSTI)

Keywords Databases Data Integration Data Analysis Ontology Management 禄 Prof. Dr. Erhard Rahm Prof. Dr. Erhard Rahm and his re- search group focus on advanced methods for data management, in- tegration and analysis of molecular- biological data. They, particularly, have developed comprehensive data

Sch眉ler, Axel

306

The Integral Fast Reactor  

SciTech Connect

Argonne National Laboratory, since 1984, has been developing the Integral Fast Reactor (IFR). This paper will describe the way in which this new reactor concept came about; the technical, public acceptance, and environmental issues that are addressed by the IFR; the technical progress that has been made; and our expectations for this program in the near term. 5 refs., 3 figs.

Till, C.E.; Chang, Y.I. (Argonne National Lab., IL (USA)); Lineberry, M.J. (Argonne National Lab., Idaho Falls, ID (USA))

1990-01-01T23:59:59.000Z

307

Integrally formed radio frequency quadrupole  

DOE Patents (OSTI)

An improved radio frequency quadrupole (10) is provided having an elongate housing (11) with an elongate central axis (12) and top, bottom and two side walls (13a-d) symmetrically disposed about the axis, and vanes (14a-d) formed integrally with the walls (13a-d), the vanes (14a-d) each having a cross-section at right angles to the central axis (12) which tapers inwardly toward the axis to form electrode tips (15a-d) spaced from each other by predetermined distances. Each of the four walls (13a-d), and the vanes (14a-d) integral therewith, is a separate structural element having a central lengthwise plane (16) passing through the tip of the vane, the walls (13a-d) having flat mounting surfaces (17, 18) at right angles to and parallel to the control plane (16), respectively, which are butted together to position the walls and vane tips relative to each other.

Abbott, Steven R. (Concord, CA)

1989-01-01T23:59:59.000Z

308

Systems Integration (Fact Sheet)  

DOE Green Energy (OSTI)

The fact sheet summarizes the goals and activities of the DOE Solar Energy Technologies Program efforts within its photovoltaics subprogram.

Not Available

2010-09-01T23:59:59.000Z

309

Distribution Integrity Management Plant (DIMP)  

SciTech Connect

This document is the distribution integrity management plan (Plan) for the Los Alamos National Laboratory (LANL) Natural Gas Distribution System. This Plan meets the requirements of 49 CFR Part 192, Subpart P Distribution Integrity Management Programs (DIMP) for the LANL Natural Gas Distribution System. This Plan was developed by reviewing records and interviewing LANL personnel. The records consist of the design, construction, operation and maintenance for the LANL Natural Gas Distribution System. The records system for the LANL Natural Gas Distribution System is limited, so the majority of information is based on the judgment of LANL employees; the maintenance crew, the Corrosion Specialist and the Utilities and Infrastructure (UI) Civil Team Leader. The records used in this report are: Pipeline and Hazardous Materials Safety Administration (PHMSA) 7100.1-1, Report of Main and Service Line Inspection, Natural Gas Leak Survey, Gas Leak Response Report, Gas Leak and Repair Report, and Pipe-to-Soil Recordings. The specific elements of knowledge of the infrastructure used to evaluate each threat and prioritize risks are listed in Sections 6 and 7, Threat Evaluation and Risk Prioritization respectively. This Plan addresses additional information needed and a method for gaining that data over time through normal activities. The processes used for the initial assessment of Threat Evaluation and Risk Prioritization are the methods found in the Simple, Handy Risk-based Integrity Management Plan (SHRIMP{trademark}) software package developed by the American Pipeline and Gas Agency (APGA) Security and Integrity Foundation (SIF). SHRIMP{trademark} uses an index model developed by the consultants and advisors of the SIF. Threat assessment is performed using questions developed by the Gas Piping Technology Company (GPTC) as modified and added to by the SHRIMP{trademark} advisors. This Plan is required to be reviewed every 5 years to be continually refined and improved. Records for all piping system installed after the effective date of this Plan will be captured and retained in the UI records documentation system. Primary Utility Asbuilts are maintained by Utilities Mapping (UMAP) and additional records are maintained on the N drive. Engineering Change Notices (ECNs) are stored on the N drive under configuration management and kept up by Utilities and Infrastructure Division Office (UI-DO). Records include, at a minimum, the location where new piping and appurtenances are installed and the material of which they are constructed.

Gonzales, Jerome F. [Los Alamos National Laboratory

2012-05-07T23:59:59.000Z

310

Towards An Integration Of Message Sequence Charts And Timed Maude  

Science Conference Proceedings (OSTI)

This paper is a step toward an integration of a graphical and a formal method and toward building a unifying specification formalism which can support different software views: functional, data, process, and time. In particular, we study the relation ...

P. Kosiuczensko; M. Wirsing

2001-01-01T23:59:59.000Z

311

Integrated Project Team RM  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Integrated Project Team (IPT) Review Module Integrated Project Team (IPT) Review Module March 2010 CD-0 This R O 0 Review Modul OFFICE OF Inte C CD-1 le was piloted F ENVIRO Standard R grated P Rev Critical Decis CD-2 M at the OR U 23 incorporated ONMENTAL Review Plan Project Te view Module sion (CD) Ap CD March 2010 33 Disposition in the Review L MANAGE n (SRP) eam (IPT e pplicability D-3 Project in 200 Module. EMENT T) CD-4 09. Lessons lea Post Ope arned have been eration n Standard Review Plan, 2 nd Edition, March 2010 i FOREWORD The Standard Review Plan (SRP) 1 provides a consistent, predictable corporate review framework to ensure that issues and risks that could challenge the success of Office of Environmental Management (EM) projects are identified early and addressed proactively. The internal EM

312

Nonlinear integrable ion traps  

Science Conference Proceedings (OSTI)

Quadrupole ion traps can be transformed into nonlinear traps with integrable motion by adding special electrostatic potentials. This can be done with both stationary potentials (electrostatic plus a uniform magnetic field) and with time-dependent electric potentials. These potentials are chosen such that the single particle Hamilton-Jacobi equations of motion are separable in some coordinate systems. The electrostatic potentials have several free adjustable parameters allowing for a quadrupole trap to be transformed into, for example, a double-well or a toroidal-well system. The particle motion remains regular, non-chaotic, integrable in quadratures, and stable for a wide range of parameters. We present two examples of how to realize such a system in case of a time-independent (the Penning trap) as well as a time-dependent (the Paul trap) configuration.

Nagaitsev, S.; /Fermilab; Danilov, V.; /SNS Project, Oak Ridge

2011-10-01T23:59:59.000Z

313

Integrated Deployment | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Integrated Deployment Integrated Deployment Integrated Deployment Integrated technology deployment uses a comprehensive approach to implement a variety of efficiency and renewable energy technology solutions in communities and cities, federal agencies, international locations, and states and territories. need_alt Community Renewable Energy Deployment Webinars Hear about successful community renewable energy projects, including the challenges and barriers faced during development. Learn more Integrated Deployment Projects The following projects provide examples of how the U.S. Department of Energy (DOE) and the National Renewable Energy Laboratory have used an integrated approach to address various location-specific energy challenges that is both scalable and replicable around the world:

314

Integrated Assessment | Open Energy Information  

Open Energy Info (EERE)

Integrated Assessment Integrated Assessment Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Integrated Assessment: Mainstreaming sustainability into policymaking--A guidance manual Agency/Company /Organization: United Nations Environment Programme Topics: Background analysis Website: www.unep.ch/etb/publications/AI%20guidance%202009/UNEP%20IA%20final.pd Equivalent URI: cleanenergysolutions.org/content/times-integrated-assessment-model-0,h Language: English Policies: Deployment Programs DeploymentPrograms: Technical Assistance References: Integrated Assessment[1] The Times Integrated Assessment Model (TIAM) comprises several thousand technologies in all sectors of the energy system. It is characterized by several technical and economic parameters and by emission coefficients for

315

ORNL integrated forecasting system  

SciTech Connect

This paper describes the integrated system for forecasting electric energy and load. In the system, service area models of electrical energy (kWh) and load distribution (minimum and maximum loads and load duration curve) are linked to a state-level model of electrical energy (kWh). Thus, the service area forecasts are conditional upon the state-level forecasts. Such a linkage reduces considerably the data requirements for modeling service area electricity demand.

Rizy, C.G.

1983-01-01T23:59:59.000Z

316

Integration of Renewables: Preprint  

DOE Green Energy (OSTI)

This is an overview of renewable energy technologies, especially those that can be used for distributed generation of electricity or heat. It This paper reviews the types of technologies, their present usage in the United States, their advantages in terms of resources, availability, modularity, emissions, and integration in distributed energy systems. It reviews some of the history of their use and projects their growth and cost.

Bull, S.

2004-11-01T23:59:59.000Z

317

SAMGrid integration of SRMs  

SciTech Connect

SAMGrid is the shared data handling framework of the two large Fermilab Run II collider experiments: DZero and CDF. In production since 1999 at D0, and going into production at CDF, the SAMGrid framework has been adapted over time to accommodate a variety of storage solutions and configurations, as well as the differing data processing models of these two experiments. This has been very successful for both experiments. Backed by primary data repositories of approximately 1 PB in size for each experiment, the SAMGrid framework delivers over 100 TB/day to DZero and CDF analyses at Fermilab and around the world. Each of the storage systems used with SAMGrid, however, has distinct interfaces, protocols, and behaviors. This led to different levels of integration of the various storage devices into the framework, which complicated the exploitation of their functionality and limited in some cases SAMGrid expansion across the experiments Grid. In an effort to simplify the SAMGrid storage interfaces, SAMGrid is adopting the Storage Resource Manager (SRM) concept as the universal interface to all storage devices. This simplifies the SAMGrid framework, especially the implementation of storage device interactions. It prepares the SAMGrid framework for future storage solutions equipped with SRM interfaces, without the need for long and risky software integration projects. In principle, any storage device with an SRM interface can be used with the SAMGrid framework. The integration of SRMs is an important further step towards evolving the SAMGrid framework into a co-operating collection of distinct, modular grid-oriented services. This report outlines how the SRMs are being integrated into the existing SAMGrid framework without disturbing on-going operations.

Kennedy, R.D.; Baranovski, A.; Garzoglio, G.; Illingworth, R.; Kreymer, A.; Kumar, A.; Loebel-Carpenter, L.; Lueking, L.; Lyon, A.; Merritt, W.; Terekhov, I.; Trumbo, J.; Veseli, S.; White, S.; /Fermilab; Burgon-Lyon, M.; St. Denis, R.; /Glasgow U.; Belforte, S.; /INFN, Trieste; Kerzel, U.; /Karlsruhe U.; Bartsch, V.; Leslie, M.; Stonjek, S.; /Oxford

2004-12-01T23:59:59.000Z

318

Material and energy recovery in integrated waste management systems. An evaluation based on life cycle assessment  

Science Conference Proceedings (OSTI)

This paper reports the environmental results, integrated with those arising from mass and energy balances, of a research project on the comparative analysis of strategies for material and energy recovery from waste, funded by the Italian Ministry of Education, University and Research. The project, involving the cooperation of five University research groups, was devoted to the optimisation of material and energy recovery activities within integrated municipal solid waste (MSW) management systems. Four scenarios of separate collection (overall value of 35%, 50% without the collection of food waste, 50% including the collection of food waste, 65%) were defined for the implementation of energetic, environmental and economic balances. Two sizes of integrated MSW management system (IWMS) were considered: a metropolitan area, with a gross MSW production of 750,000 t/year and an average province, with a gross MSW production of 150,000 t/year. The environmental analysis was conducted using Life Cycle Assessment methodology (LCA), for both material and energy recovery activities. In order to avoid allocation we have used the technique of the expansion of the system boundaries. This means taking into consideration the impact on the environment related to the waste management activities in comparison with the avoided impacts related to the saving of raw materials and primary energy. Under the hypotheses of the study, both for the large and for the small IWMS, the energetic and environmental benefits are higher than the energetic and environmental impacts for all the scenarios analysed in terms of all the indicators considered: the scenario with 50% separate collection in a drop-off scheme excluding food waste shows the most promising perspectives, mainly arising from the highest collection (and recycling) of all the packaging materials, which is the activity giving the biggest energetic and environmental benefits. Main conclusions of the study in the general field of the assessment of the environmental performance of any integrated waste management scheme address the importance of properly defining, beyond the design value assumed for the separate collection as a whole, also the yields of each material recovered; particular significance is finally related to the amount of residues deriving from material recovery activities, resulting on average in the order of 20% of the collected materials.

Giugliano, Michele; Cernuschi, Stefano [Politecnico di Milano - DIIAR, Environmental Section, P.zza Leonardo da Vinci, 32, 20133 Milano (Italy); Grosso, Mario, E-mail: mario.grosso@polimi.it [Politecnico di Milano - DIIAR, Environmental Section, P.zza Leonardo da Vinci, 32, 20133 Milano (Italy); Rigamonti, Lucia [Politecnico di Milano - DIIAR, Environmental Section, P.zza Leonardo da Vinci, 32, 20133 Milano (Italy)

2011-09-15T23:59:59.000Z

319

Energy System Integration(Smith 2001) | OpenEI Community  

Open Energy Info (EERE)

Energy System Integration(Smith 2001) Energy System Integration(Smith 2001) Home > Groups > Energy Systems Integration Qinsun's picture Submitted by Qinsun(35) Member 15 November, 2012 - 13:09 Literature Review This paper proposed the business analysis on energy system integration. It provided a procedure for the business analysis, and listed related techniques and technologies. It can be view as a first approach of business analysis on ESI The method used in the paper is Process Optimization Audit and One-Line Balance The paper financially analyzed ESI It did not provide clear definition No result is provided. Groups: Energy Systems Integration Login to post comments Latest documents Qinsun Research topics related to ESI Posted: 15 Nov 2012 - 13:55 by Qinsun Qinsun Prospects for Nuclear Power(Davis 2012)

320

National Bioenergy Center Sugar Platform Integration Project: Quarterly Update #12, July-September 2006  

SciTech Connect

Volume 12 of a quarterly newsletter that describes the activities of the National Bioenergy Center's Sugar Platform Integration Project.

Schell, D.

2006-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "integration activities related" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Energize Your Photovoltaics: NREL's Process Development and Integration Laboratory (PDIL)  

DOE Green Energy (OSTI)

The Process Development and Integration Laboratory (PDIL) at the National Renewable Energy Laboratory (NREL) is a unique collaborative facility where industry and universities can work closely with NREL scientists on integrated equipment to answer pressing questions related to photovoltaics (PV). The integrated equipment includes deposition, processing, and characterization tools. We work with a wide range of PV materials, from crystalline silicon to thin-films (amorphous, nano- and microcrystalline silicon, copper indium gallium diselenide, cadmium telluride) to organic PV. The PDIL integrates all the data to: Automate control via recipes; Share data easily and securely; and Facilitate analysis. The PDIL integrates all the tools to: Eliminate air exposure between steps; Sequence steps in any order ; and Incorporate combinatorial techniques. The PDIL integrates all the materials to: Provide greater device flexibility; Allow diverse experts to work together; and Better support industry and universities.

Not Available

2008-04-01T23:59:59.000Z

322

Pipeline integrity programs help optimize resources  

SciTech Connect

Natural Gas Pipeline Co. of America has developed an integrity program. NGPL operates approximately 13,000 miles of large-diameter parallel gas pipelines, which extend from traditional supply areas to the Chicago area. Line Number 1, the 24-in. Amarillo-to-Chicago mainline, was built in 1931, and parts of it are still in operation today. More than 85% of the NGPL systems is more than 25 years old, and continues to provide very reliable service. The company operated for many years with specialized crews dedicated to pipeline systems, and a corrosion department. Under this organization, employees developed an intimate knowledge of the pipeline and related integrity issues. NGPL relied on this knowledge to develop its integrity program. The risk assessment program is a very valuable tool for identifying areas that may need remedial work. However, it is composed of many subjective evaluations and cannot predict failure nor ensure good performance. The program is an excellent data management tool that enables a pipeline operator to combine all available information needed to make integrity decisions. The integrity of a pipeline is continually changing, and any program should be updated on a regular basis.

Dusek, P.J. (Natural Gas Pipeline Co. of America, Lombard, IL (United States))

1994-03-01T23:59:59.000Z

323

Integrated Deployment and the Energy Systems Integration Facility: Workshop Proceedings  

SciTech Connect

This report summarizes the workshop entitled: Integrated Deployment and the Energy Systems Integration Facility. In anticipation of the opening of the ESIF, NREL held the workshop August 21-23, 2012 and invited participants from utilities, government, industry, and academia to discuss renewable integration challenges and discover new ways to meet them by taking advantage of the ESIF's capabilities.

Kroposki, B.; Werner, M.; Spikes, A.; Komomua, C.

2013-01-01T23:59:59.000Z

324

Tests of General Relativity  

SciTech Connect

The last years have seen continuing activities in the exploration of our understanding of gravity, motivated by results from precision cosmology and new precision astrophysical experiments. At the centre of attention lies the question as to whether general relativity is the correct theory of gravity. In answering this question, we work not only towards correctly interpreting the phenomenon of 'dark energy' but also towards the goal of achieving a quantum theory of gravity. In these efforts, the observations of pulsars, especially those in binary systems, play an important role. Pulsars do not only provide the only evidence for the existence of gravitational waves so far, but they also provide precision tests of general relativity and alternative theories of gravity. This talk summarizes the current state-of-art in these experiments and looks into the future.

Kramer, Michael [MPI fuer Radioastronomie, Auf dem Huegel 69, 53121 Bonn (Germany); Jodrell Bank Centre for Astrophysics, University of Manchester, Manchester M13 9PL (United Kingdom)

2011-09-22T23:59:59.000Z

325

Active magnetic regenerator  

SciTech Connect

The disclosure is directed to an active magnetic regenerator apparatus and method. Brayton, Stirling, Ericsson, and Carnot cycles and the like may be utilized in an active magnetic regenerator to provide efficient refrigeration over relatively large temperature ranges.

Barclay, John A. (Los Alamos, NM); Steyert, William A. (Los Alamos, NM)

1982-01-01T23:59:59.000Z

326

Structural Deformation during a Typhoon as Monitored by an Integrated Multi-Sensor System  

E-Print Network (OSTI)

Monitoring structural response induced by severe loadings such as typhoon is an efficient way to mitigate or prevent damage. Because the measured signal can be used to activate an alarm system to evacuate people from an endangered building, or to drive a control system to suppress typhoon excited vibrations so as to protect the integrity of the structure. A 108m tall tower in Tokyo has been monitored by an integrated system combining RTK-GPS and accelerometers. Data collected by the multi-sensor system have been analysed and compared to the original finite element modelling (FEM) result for structural deformation monitoring studies. Especially, the short time Fast Fourier Transform (FFT) analysis results have shown that the time-frequency relation does give us almost instantaneous frequency response during a typhoon event. In this paper the feasibility of integrating advanced sensing technologies such as RTK-GPS with traditional accelerometer sensors, for structural vibration response and deformation monitoring under severe loading conditions, is discussed. The redundancy within the integrated system has shown robust quality assurance.

Xiaojing Li

2004-01-01T23:59:59.000Z

327

January 2005 INTEGRATING IT SECURITY  

E-Print Network (OSTI)

January 2005 INTEGRATING IT SECURITY INTO THE CAPITAL PLANNING AND INVESTMENT CONTROL PROCESS By Joan S. Hash, Computer Security Division, Information Technology Laboratory, National Institute of Standards and Technology Introduction To assist federal agencies with effec tively integrating security

328

Integrating Materials and Manufacturing Innovation  

Science Conference Proceedings (OSTI)

Jun 13, 2012 ... 06/13 - TMS Launches New Open Access Journal: Integrating Materials and Manufacturing Innovation. Patti Dobranski Communication...

329

Integrated Computational Materials Engineering (ICME)  

Science Conference Proceedings (OSTI)

Presentation Title, Integrated Computational Materials Engineering (ICME) in the Automotive Industry: Successes and Opportunities. Author(s), Louis Gerard...

330

NREL: Vehicle Systems Analysis - Related Links  

NLE Websites -- All DOE Office Websites (Extended Search)

information related to NREL's vehicle systems analysis capabilities and R&D activities, including: Models and tools National laboratories Models and Tools NREL's vehicle system...

331

Residential Buildings Integration Program  

NLE Websites -- All DOE Office Websites (Extended Search)

David Lee David Lee Program Manager David.Lee@ee.doe.gov 202-287-1785 April 2, 2013 Residential Buildings Integration Program Building Technologies Office Program Peer Review 2 | Building Technologies Office eere.energy.gov Sub-Programs for Review Better Buildings Neighborhood Program Building America Challenge Home Home Energy Score Home Performance with ENERGY STAR Solar Decathlon 3 | Building Technologies Office eere.energy.gov How Residential Buildings Fits into BTO Research & Development * Develop technology roadmaps * Prioritize opportunities * Solicit and select innovative technology solutions * Collaborate with researchers

332

Residential Buildings Integration Program  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

David Lee David Lee Program Manager David.Lee@ee.doe.gov 202-287-1785 April 2, 2013 Residential Buildings Integration Program Building Technologies Office Program Peer Review 2 | Building Technologies Office eere.energy.gov Sub-Programs for Review Better Buildings Neighborhood Program Building America Challenge Home Home Energy Score Home Performance with ENERGY STAR Solar Decathlon 3 | Building Technologies Office eere.energy.gov How Residential Buildings Fits into BTO Research & Development * Develop technology roadmaps * Prioritize opportunities * Solicit and select innovative technology solutions * Collaborate with researchers

333

Integrated optical XY coupler  

DOE Patents (OSTI)

An integrated optical XY coupler having two converging input waveguide arms meeting in a central section and a central output waveguide arm and two diverging flanking output waveguide arms emanating from the central section. In-phase light from the input arms constructively interfers in the central section to produce a single mode output in the central output arm with the rest of the light being collected in the flanking output arms. Crosstalk between devices on a substrate is minimized by this collection of the out-of-phase light by the flanking output arms of the XY coupler.

Vawter, G. Allen (Albuquerque, NM); Hadley, G. Ronald (Albuquerque, NM)

1997-01-01T23:59:59.000Z

334

Repast vector GIS integration.  

Science Conference Proceedings (OSTI)

Repast now supports the reading, writing, and display of shapefile data. In the Repast-GIS integration, these tasks are generally broken up into two different classes, a data class, and a display class. The data class allows data to be read into Repast from the GIS, and written out from Repast into a GIS format. The current implementation of GIS in Repast is focused on two systems: ESRI ArcMap and OpenMap. This paper will elucidate how to use each of these systems with Repast.

Najlis, R.; North, M. J.; Decision and Information Sciences

2005-01-01T23:59:59.000Z

335

Integrated Assessment Modeling  

Science Conference Proceedings (OSTI)

This paper discusses the role of Integrated Assessment models (IAMs) in climate change research. IAMs are an interdisciplinary research platform, which constitutes a consistent scientific framework in which the large-scale interactions between human and natural Earth systems can be examined. In so doing, IAMs provide insights that would otherwise be unavailable from traditional single-discipline research. By providing a broader view of the issue, IAMs constitute an important tool for decision support. IAMs are also a home of human Earth system research and provide natural Earth system scientists information about the nature of human intervention in global biogeophysical and geochemical processes.

Edmonds, James A.; Calvin, Katherine V.; Clarke, Leon E.; Janetos, Anthony C.; Kim, Son H.; Wise, Marshall A.; McJeon, Haewon C.

2012-10-31T23:59:59.000Z

336

Scientific Innovation Through Integration  

NLE Websites -- All DOE Office Websites (Extended Search)

pnnl.gov pnnl.gov Cell Isolation and Systems Analysis Multi-photon fluorescence microscope: Seamlessly integrates nonlinear two-photon excitation, laser scanning confocal microscopy and fluorescence lifetime imaging (FLIM) for minimally invasive and deep-penetrating 3D imaging of living tissues and cells as well as quantitative investigation of molecular interaction dynamics by fluorescence resonance energy transfer (FRET) in living cells. Transcriptional profiling using next-generation sequencing technology (RNA-Seq): Offers massively parallel next-generation sequencing platforms for unbiased and quantitative profiling of gene expression patterns in prokaryotic and eukaryotic cells, complete with facilities for sample preparation as well as data processing and analysis.

337

Community-based relational Markov networks in complex networks  

Science Conference Proceedings (OSTI)

Relational Markov networks (RMNs) are a joint probabilistic model for an entire collection of related entities. The model is able to mine relational data effectively by integrating information from content attributes of individual entities as well as ... Keywords: community structure, complex networks, graphical models, maximum pseudolikelihood estimation, relational Markov networks

Huaiyu Wan; Youfang Lin; Caiyan Jia; Houkuan Huang

2011-10-01T23:59:59.000Z

338

U.S. BURNING PLASMA ORGANIZATION ACTIVITIES  

Science Conference Proceedings (OSTI)

The national U.S. Burning Plasma Organization (USBPO) was formed to provide an umbrella structure in the U.S. fusion science research community. Its main purpose is the coordination of research activities in the U.S. program relevant to burning plasma science and preparations for participation in the international ITER experiment. This grant provided support for the continuing development and operations of the USBPO in its first years of existence. A central feature of the USBPO is the requirement for broad community participation in and governance of this effort. We concentrated on five central areas of activity of the USBPO during this grant period. These included: 1) activities of the Director and support staff in continuing management and development of the USBPO activity; 2) activation of the advisory Council; 3) formation and initial research activities of the research community Topical Groups; 4) formation of Task Groups to perform specific burning plasma related research and development activities; 5) integration of the USBPO community with the ITER Project Office as needed to support ITER development in the U.S.

Raymond J. Fonck

2009-08-11T23:59:59.000Z

339

HLW System Integrated Project Team  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

l l W S Hi h l W S High Level Waste System High Level Waste System Integrated Project Team Integrated Project Team Integrated Project Team Integrated Project Team Steve Schneider Steve Schneider Office of Engineering and Technology High Level Waste Corporate Board March 5, 2009 This document is intended for planning and analysis purposes, assuming a continuing constrained budget environment. Every effort will be made to comply with all applicable environmental and legal obligations, while also assuring that essential functions necessary to protect human health, the environment and national security are maintained. 1 Introduction Introduction Introduction Introduction Challenges and Priorities High Level Waste Strategic Initiative Results High Level Waste System Integrated

340

Integrated circuit with dissipative layer for photogenerated carriers  

DOE Patents (OSTI)

The sensitivity of an integrated circuit to single-event upsets is decreased by providing a dissipative layer of silicon nitride between a silicon substrate and the active device. Free carriers generated in the substrate are dissipated by the layer before they can build up charge on the active device. 1 fig.

Myers, D.R.

1988-04-20T23:59:59.000Z

Note: This page contains sample records for the topic "integration activities related" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Integrating preconcentrator heat controller  

DOE Patents (OSTI)

A method and apparatus for controlling the electric resistance heating of a metallic chemical preconcentrator screen, for example, used in portable trace explosives detectors. The length of the heating time-period is automatically adjusted to compensate for any changes in the voltage driving the heating current across the screen, for example, due to gradual discharge or aging of a battery. The total deposited energy in the screen is proportional to the integral over time of the square of the voltage drop across the screen. Since the net temperature rise, .DELTA.T.sub.s, of the screen, from beginning to end of the heating pulse, is proportional to the total amount of heat energy deposited in the screen during the heating pulse, then this integral can be calculated in real-time and used to terminate the heating current when a pre-set target value has been reached; thereby providing a consistent and reliable screen temperature rise, .DELTA.T.sub.s, from pulse-to-pulse.

Bouchier, Francis A. (Albuquerque, NM); Arakaki, Lester H. (Edgewood, NM); Varley, Eric S. (Albuquerque, NM)

2007-10-16T23:59:59.000Z

342

Building-integrated photovoltaics  

SciTech Connect

This is a study of the issues and opportunities for building-integrated PV products, seen primarily from the perspective of the design community. Although some quantitative analysis is included, and limited interviews are used, the essence of the study is qualitative and subjective. It is intended as an aid to policy makers and members of the technical community in planning and setting priorities for further study and product development. It is important to remember that the success of a product in the building market is not only dependent upon its economic value; the diverse group of building owners, managers, regulators, designers, tenants and users must also find it practical, aesthetically appealing and safe. The report is divided into 11 sections. A discussion of technical and planning considerations is followed by illustrative diagrams of different wall and roof assemblies representing a range of possible PV-integration schemes. Following the diagrams, several of these assemblies are then applied to a conceptual test building which is analyzed for PV performance. Finally, a discussion of mechanical/electrical building products incorporating PVs is followed by a brief surveys of cost issues, market potential and code implications. The scope of this report is such that most of the discussion does not go beyond stating the questions. A more detailed analysis will be necessary to establish the true costs and benefits PVs may provide to buildings, taking into account PV power revenue, construction costs, and hidden costs and benefits to building utility and marketability.

1993-01-01T23:59:59.000Z

343

Frio II Brine Pilot: Report on GEOSEQ Activities  

Science Conference Proceedings (OSTI)

LBNL's GEOSEQ project is a key participant in the Frio IIbrine pilot studying geologic sequestration of CO2. During During theinjection phase of the Frio-II brine pilot, LBNL collected multiple datasets including seismic monitoring, hydrologic monitoring and geochemicalsampling. These data sets are summarized in this report including allCASSM (continuous active source seismic monitoring) travel time data,injection pressure and flow rate data and gaseous sampling and tracerdata. Additional results from aqueous chemistry analysis performed by theU. S. Geological Survey (USGS) are summarized. Post injectionmodification of the flow model for Frio II is shown. Thesemodificationsare intended to facilitate integration with the monitoring data andincorporation of model heterogeneity. Current activities of LBNL's GEOSEQproject related to the Frio II test are shown, including development of anew petrophysical model for improved interpretation of seismic monitoringdata and integration of this data with flow modeling.

Daley, T.M.; Freifeld, B.M.; Ajo-Franklin, J.B.; Doughty, C.; Benson, S.M.

2007-11-17T23:59:59.000Z

344

Stakeholder Relations | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Stakeholder Relations Stakeholder Relations Stakeholder Relations Site tours, like this one near Rifle, Colorado, allow stakeholders to learn more about LM projects. Site tours, like this one near Rifle, Colorado, allow stakeholders to learn more about LM projects. Public meetings give stakeholders an opportunity to gain information about DOE and LM activities. This public meeting was held in Riverton, Wyoming. Public meetings give stakeholders an opportunity to gain information about DOE and LM activities. This public meeting was held in Riverton, Wyoming. Site tours, like this one near Rifle, Colorado, allow stakeholders to learn more about LM projects. Public meetings give stakeholders an opportunity to gain information about DOE and LM activities. This public meeting was held in Riverton, Wyoming.

345

Fuel Cell Technologies Office: Systems Integration  

NLE Websites -- All DOE Office Websites (Extended Search)

Systems Integration to someone by E-mail Share Fuel Cell Technologies Office: Systems Integration on Facebook Tweet about Fuel Cell Technologies Office: Systems Integration on...

346

NREL: Energy Systems Integration - Residential and Commercial...  

NLE Websites -- All DOE Office Websites (Extended Search)

Residential and Commercial Integration Energy systems integration R&D at the small-scale, residential and commercial integration level encompasses diverse technologies such as...

347

Formal Model Merging Applied to Class Diagram Integration  

Science Conference Proceedings (OSTI)

The integration of software artifacts is present in many scenarios of the Software Engineering field: object-oriented modeling, relational databases, XML schemas, ontologies, aspect-oriented programming, etc. In Model Management, software artifacts are ... Keywords: Model Management, Model-Driven Engineering, QVT Relations, conflict resolution, model merging

Artur Boronat; Jos . Cars; Isidro Ramos; Patricio Letelier

2007-01-01T23:59:59.000Z

348

CLASIC DATA INTEGRATION  

NLE Websites -- All DOE Office Websites (Extended Search)

Precipitating Clouds in the Southern Great Plains Region Oklahoma Radar Facilities S-band: Operational WSR-88D Network KOUN Polarimetric (NSSL) MPAR Phased Array (NSSL) C-band: Polarimetric (OU/EEC) Mobile SMART-R (OU et. al) TDWR (FAA) X-band: CASA Polarimetric IP1 Mobile Polarimetric (NSSL) Ka-band: MMCR, Central Facility (ARM) W-band: WACR, Central Facility (ARM) Profiler: ARM, NOAA Oklahoma Instrumentation Oklahoma Mesonet (Oklahoma) ARS Micronet (USDA) ARM SGP Facilities (DOE) Oklahoma Lightning Mapping Array, NLDN NOAA Profiler Network Kessler Farm Field Laboratory ASOS, AWOS, AWSS (FAA/NWS/DOD) ARM & Oklahoma Dataset Integration: Examples Oklahoma Radar 飦 CASA radars offer unique 2D/3D wind retrieval

349

Integrated Safety Management  

NLE Websites -- All DOE Office Websites (Extended Search)

ISM Day: March 10, 2010 ISM Day: March 10, 2010 ISM Day: June 6, 2008 Integrated Safety Management (ISM) Seven Principles of ISM Five Functions of ISM "Define the Scope of Work" Is the work clearly defined? Authorized? Do I know how to do the job? Do I have the proper equipment? Support? Have there been problems with tasks like this? "Analyze the Hazards" What are the hazards of the job? What can go wrong? Has the job been reviewed by a qualified person? "Develop Hazard Controls" Are all the necessary controls in place? (LOTO, PPE, Procedures etc.) Do I know what the controls are, and how to use them? What if something unexpected goes wrong? "Perform Work" Has the system responded as expected? How do I know? When will I call for assistance or stop work?

350

Integrated fluorescence analysis system  

DOE Patents (OSTI)

An integrated fluorescence analysis system enables a component part of a sample to be virtually sorted within a sample volume after a spectrum of the component part has been identified from a fluorescence spectrum of the entire sample in a flow cytometer. Birefringent optics enables the entire spectrum to be resolved into a set of numbers representing the intensity of spectral components of the spectrum. One or more spectral components are selected to program a scanning laser microscope, preferably a confocal microscope, whereby the spectrum from individual pixels or voxels in the sample can be compared. Individual pixels or voxels containing the selected spectral components are identified and an image may be formed to show the morphology of the sample with respect to only those components having the selected spectral components. There is no need for any physical sorting of the sample components to obtain the morphological information.

Buican, Tudor N. (Los Alamos, NM); Yoshida, Thomas M. (Los Alamos, NM)

1992-01-01T23:59:59.000Z

351

Classicalization via Path Integral  

E-Print Network (OSTI)

Recently, it was suggested that a large class of non-renormalizable theories may need no UV completion. By analogy with gravity where classical black holes are expected to be created in high-energy scatterings, it is conjectured that similar classical solutions, so-called classicalons, should occur. In this way the theory protects itself against non-unitarity, for instead of probing small distances at high energies one enters a classical regime. An effective theory of Goldstone bosons provides and example in which the size of classicalons grows with energy, and the high energy scattering is cut-off by small momenta, inversely proportional to the classicalon size. In this note we offer an alternative, path integral discussion of this important result.

Borut Bajc; Arshad Momen; Goran Senjanovi?

2011-02-17T23:59:59.000Z

352

Classicalization via Path Integral  

E-Print Network (OSTI)

Recently, it was suggested that a large class of non-renormalizable theories may need no UV completion. By analogy with gravity where classical black holes are expected to be created in high-energy scatterings, it is conjectured that similar classical solutions, so-called classicalons, should occur. In this way the theory protects itself against non-unitarity, for instead of probing small distances at high energies one enters a classical regime. An effective theory of Goldstone bosons provides and example in which the size of classicalons grows with energy, and the high energy scattering is cut-off by small momenta, inversely proportional to the classicalon size. In this note we offer an alternative, path integral discussion of this important result.

Bajc, Borut; Senjanovi?, Goran

2011-01-01T23:59:59.000Z

353

Integrated Facilities Disposition Program  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Facilities Facilities Disposition Program Tank Waste Corporate Board Meeting at ORNL Sharon Robinson Dirk Van Hoesen Robert Jubin Brad Patton July 29, 2009 2 Managed by UT-Battelle for the U.S. Department of Energy The Integrated Facility Disposition Program (IFDP) addresses the remaining EM Scope at both ORNL and Y-12 Cost Range: $7 - $14B Schedule: 26 Years 3 Managed by UT-Battelle for the U.S. Department of Energy Scope of work * Treatment and disposition of legacy materials and waste * D&D 327 (1.5 M ft 2 ) excess facilities generating >2 M yd 3 debris * Soil and groundwater remedial actions generating >1 M yd 3 soils * Facilities surveillance and maintenance * Reconfiguration of waste management facilities * Ongoing waste management operations * Project management

354

SUBJECT: PILGRIM NUCLEAR POWER STATION- NRC INTEGRATED INSPECTION  

E-Print Network (OSTI)

your Pilgrim reactor facility. The enclosed integrated inspection report documents the inspection findings, which were discussed on July 7, 2005, with Mr T. Kirwin and members of your staff. The inspection examined activities conducted under your license as they relate to safety and compliance with the Commission抯 rules and regulations and with the conditions of your license. The inspectors reviewed selected procedures and records, observed activities, and interviewed personnel. On the basis of the results of this inspection, no findings of significance were identified. After this inspection period ended, the NRC issued a letter on July 14, 2005, issuing a Severity Level III Notice of Violation and Proposed Imposition of Civil Penalty. This inspection report acknowledges issuance of that letter and assigns a tracking number for the Severity Level III Notice of Violation. Additionally, licensee-identified violations which were determined to be of very low safety significance are listed in Section 4OA7 of this report. If you contest any NCV in this report, you should provide a response with the basis for your denial, within 30 days of the

Mr. Michael; A. Balduzzi; Pilgrim Nuclear; Power Station

2005-01-01T23:59:59.000Z

355

SUBSURFACE REPOSITORY INTEGRATED CONTROL SYSTEM DESIGN  

Science Conference Proceedings (OSTI)

The purpose of this document is to develop preliminary high-level functional and physical control system architectures for the proposed subsurface repository at Yucca Mountain. This document outlines overall control system concepts that encompass and integrate the many diverse systems being considered for use within the subsurface repository. This document presents integrated design concepts for monitoring and controlling the diverse set of subsurface operations. The subsurface repository design will be composed of a series of diverse systems that will be integrated to accomplish a set of overall functions and objectives. The subsurface repository contains several Instrumentation and Control (I&C) related systems including: waste emplacement systems, ventilation systems, communication systems, radiation monitoring systems, rail transportation systems, ground control monitoring systems, utility monitoring systems (electrical, lighting, water, compressed air, etc.), fire detection and protection systems, retrieval systems, and performance confirmation systems. Each of these systems involve some level of I&C and will typically be integrated over a data communication network. The subsurface I&C systems will also integrate with multiple surface-based site-wide systems such as emergency response, health physics, security and safeguards, communications, utilities and others. The scope and primary objectives of this analysis are to: (1) Identify preliminary system level functions and interface needs (Presented in the functional diagrams in Section 7.2). (2) Examine the overall system complexity and determine how and on what levels these control systems will be controlled and integrated (Presented in Section 7.2). (3) Develop a preliminary subsurface facility-wide design for an overall control system architecture, and depict this design by a series of control system functional block diagrams (Presented in Section 7.2). (4) Develop a series of physical architectures that present preliminary concepts for integrating the diverse set of control systems to be used within the subsurface repository facility (Presented in Section 7.3). (5) Develop initial concepts for an overall subsurface data communication system that can be used to integrate critical and data-intensive control systems (Presented in Section 7.4). (6) Discuss technology trends and control system design issues (Presented in Section 7.5).

C.J. Fernado

1998-09-17T23:59:59.000Z

356

The Integrated Environmental Strategies Handbook: A Resource Guide for Air  

Open Energy Info (EERE)

The Integrated Environmental Strategies Handbook: A Resource Guide for Air The Integrated Environmental Strategies Handbook: A Resource Guide for Air Quality Planning Jump to: navigation, search LEDSGP green logo.png FIND MORE DIA TOOLS This tool is part of the Development Impacts Assessment (DIA) Toolkit from the LEDS Global Partnership. Tool Summary LAUNCH TOOL Name: The Integrated Environmental Strategies Handbook: A Resource Guide for Air Quality Planning Agency/Company /Organization: United States Environmental Protection Agency Complexity/Ease of Use: Moderate Website: nepis.epa.gov/Exe/ZyPDF.cgi?Dockey=P10033EF.PDF Cost: Free References: EPA (US Environmental Protection Agency). 2004. The Integrated Environmental Strategies Handbook. EPA430-B-04-006. Washington, DC. Office of Air and Radiation.[1] Related Tools Integrated Model to Access the Global Environment

357

NREL: Energy Systems Integration - U.S. DOE's Energy Systems Integration  

NLE Websites -- All DOE Office Websites (Extended Search)

December 2013 December 2013 Energy Systems Integration eNewsletter Welcome to another issue of the Energy Systems Integration eNewsletter, the quarterly-and soon to be monthly-eNewsletter for energy systems integration (ESI) at the National Renewable Energy Laboratory (NREL). In the coming months, you'll begin to hear from us more frequently, but in smaller doses as we retool our newsletter and accompanying website to better represent the scope of work being done in the area of ESI, both at NREL and globally. Each month, we will bring you updates from NREL and our partners on the latest ESI developments worldwide. Plus, we'll highlight new ESI-related opportunities emerging in the fields of technology, science, policy, and markets. Have an item for the next issue of the ESI eNewsletter? Email us at

358

Application of mixed mode integration and new implicit inline integration at Toyota  

E-Print Network (OSTI)

This paper reports results from applying inline integration and mixed mode integration to two real applications

S. Soejima; T. Matsuba

2002-01-01T23:59:59.000Z

359

Fuel Integrity Monitoring and Failure Evaluation Handbook, Revision 1  

Science Conference Proceedings (OSTI)

This handbook documents the current status of light water reactor (LWR) fuel integrity monitoring activities in the U.S. nuclear power industry, with an emphasis on current fuel reliability methods and fuel failure mitigation techniques. The handbook provides information on boiling water reactor (BWR) and pressurized water reactor (PWR) fuel release activity monitoring techniques, including trending and interpreting the activity data with respect to the condition of the failed rods. It also presents an i...

2003-11-14T23:59:59.000Z

360

NREL: Electricity Integration Research - Facilities  

NLE Websites -- All DOE Office Websites (Extended Search)

Facilities Facilities NREL's electricity integration research is conducted in state-of-the-art facilities. These facilities assist industry in the development of power systems and address the operational challenges of full system integration. The Energy Systems Integration Facility can be used to design, test, and analyze components and systems to enable economic, reliable integration of renewable electricity, fuel production, storage, and building efficiency technologies with the U.S. electricity delivery infrastructure. New grid integration capabilities at the National Wind Technology Center will allow testing of many grid integration aspects of multi-megawatt, utility-scale variable renewable generation and storage technologies. The Distributed Energy Resources Test Facility can be used to characterize,

Note: This page contains sample records for the topic "integration activities related" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

SunShot Initiative: Transmission Grid Integration  

NLE Websites -- All DOE Office Websites (Extended Search)

Transmission Grid Integration to Transmission Grid Integration to someone by E-mail Share SunShot Initiative: Transmission Grid Integration on Facebook Tweet about SunShot Initiative: Transmission Grid Integration on Twitter Bookmark SunShot Initiative: Transmission Grid Integration on Google Bookmark SunShot Initiative: Transmission Grid Integration on Delicious Rank SunShot Initiative: Transmission Grid Integration on Digg Find More places to share SunShot Initiative: Transmission Grid Integration on AddThis.com... Concentrating Solar Power Photovoltaics Systems Integration Research, Development, & Demonstration Distribution Grid Integration Transmission Grid Integration Solar Resource Assessment Technology Validation Power Electronics & Balance of System Hardware Technologies Competitive Awards

362

SunShot Initiative: Distribution Grid Integration  

NLE Websites -- All DOE Office Websites (Extended Search)

Distribution Grid Integration to Distribution Grid Integration to someone by E-mail Share SunShot Initiative: Distribution Grid Integration on Facebook Tweet about SunShot Initiative: Distribution Grid Integration on Twitter Bookmark SunShot Initiative: Distribution Grid Integration on Google Bookmark SunShot Initiative: Distribution Grid Integration on Delicious Rank SunShot Initiative: Distribution Grid Integration on Digg Find More places to share SunShot Initiative: Distribution Grid Integration on AddThis.com... Concentrating Solar Power Photovoltaics Systems Integration Research, Development, & Demonstration Distribution Grid Integration Transmission Grid Integration Solar Resource Assessment Technology Validation Power Electronics & Balance of System Hardware Technologies Competitive Awards

363

Data dictionary model for relational databases  

Science Conference Proceedings (OSTI)

Data Dictionary is an important tool in information engineering, especially when the data is maintained in relational structures. Using the formal concepts from which relational DBMS technology is derived, it is possible to construct a meta-informational dictionary to model relational database. This general model can be used to evaluate the design of existing and planned databases, as well as modeling business or scientific data. Such a dictionary model is described and its potential uses and benefits are explored with emphasis on integrity constraints. Issues related to the balancing of such formal conceptualization against real-world operations are presented.

Seesing, P.R.

1983-10-01T23:59:59.000Z

364

Nuclear Fuel Cycle Integrated System Analysis  

NLE Websites -- All DOE Office Websites (Extended Search)

Fuel Cycle Integrated System Analysis Fuel Cycle Integrated System Analysis Abdellatif M. Yacout Argonne National Laboratory Nuclear Engineering Division The nuclear fuel cycle is a complex system with multiple components and activities that are combined to provide nuclear energy to a variety of end users. The end uses of nuclear energy are diverse and include electricity, process heat, water desalination, district heating, and possibly future hydrogen production for transportation and energy storage uses. Components of the nuclear fuel cycle include front end components such as uranium mining, conversion and enrichment, fuel fabrication, and the reactor component. Back end of the fuel cycle include used fuel coming out the reactor, used fuel temporary and permanent storage, and fuel reprocessing. Combined with those components there

365

Integral window hermetic fiber optic components  

DOE Patents (OSTI)

In the fabrication of igniters, actuators, detonators, and other pyrotechnic devices to be activated by a laser beam, an integral optical glass window is formed by placing a preform in the structural member of the device and then melting the glass and sealing it in place by heating at a temperature between the ceramming temperature of the glass and the melting point of the metal, followed by rapid furnace cooling to avoid devitrification. No other sealing material is needed to achieve hermeticity. A preferred embodiment of this type of device is fabricated by allowing the molten glass to flow further and form a plano-convex lens integral with and at the bottom of the window. The lens functions to decrease the beam divergence caused by refraction of the laser light passing through the window when the device is fired by means of a laser beam.

Dalton, R.D.; Kramer, D.P.; Massey, R.T.; Waker, D.A.

1994-12-31T23:59:59.000Z

366

A Process-Centric Ontological Approach for Integrating Geo-Sensor Data  

Science Conference Proceedings (OSTI)

We introduce a process-centric ontological approach to relate observed properties to geo-processes that influence those observations. These relations are used to handle semantic heterogeneities that impede the integration of geo-sensor data. Our approach ...

Anusuriya Devaraju; Werner Kuhn

2010-07-01T23:59:59.000Z

367

Fuel Pathways Integration Tech Team  

NLE Websites -- All DOE Office Websites (Extended Search)

- Roxanne Danz (DOE) - Dale Gardner (DOE Systems Integration) - Don Gardner (ExxonMobil) - Johanna Ivy (NREL) - Melissa Lott (QSS Group) - Graham Moore (ChevronTexaco) -...

368

NREL: Energy Systems Integration - Events  

NLE Websites -- All DOE Office Websites (Extended Search)

Events NREL hosts events that promote understanding and collaboration on energy systems integration. Through seminars, workshops, and other educational opportunities, industry...

369

NREL: Energy Systems Integration - News  

NLE Websites -- All DOE Office Websites (Extended Search)

News Energy Systems Integration eNewsletter is a quarterly newsletter designed to keep industry partners, stakeholders, associations, and educational institutes up to date on the...

370

Data Integration using Web Services  

E-Print Network (OSTI)

In this paper we examine the opportunities for data integration in the context of the emerging Web Services systems development paradigm. The paper introduces the ...

Hansen, Mark

2003-02-10T23:59:59.000Z

371

Integrated Safety Management (ISM) - Oversight  

NLE Websites -- All DOE Office Websites (Extended Search)

Oversight Integrated Safety Management (ISM) ism logo DOE Oversight Policy PDF (P 226.1B) DOE Oversight Order PDF (O 226.1B) Draft CRADs...

372

NREL: Energy Systems Integration - Workshops  

NLE Websites -- All DOE Office Websites (Extended Search)

Systems Integration Facility (ESIF) workshops. October 2012: Increasing the Value of Microgrids through Focused RD&D Information included an overview of commercial microgrids,...

373

NREL: Transmission Grid Integration - Webmaster  

NLE Websites -- All DOE Office Websites (Extended Search)

reply. Your name: Your email address: Your message: Send Message Printable Version Transmission Grid Integration Home Issues Projects Research Staff Working with Us Publications...

374

Biomass Pretreatment for Integrated Steelmaking  

Science Conference Proceedings (OSTI)

Presentation Title, Biomass Pretreatment for Integrated Steelmaking. Author(s), Shiju Thomas, Paul Cha, Steven J McKnight, Vincent A Bouma, Andrew L Petrik,

375

Advanced Integrated Traction System  

SciTech Connect

The United States Department of Energy elaborates the compelling need for a commercialized competitively priced electric traction drive system to proliferate the acceptance of HEVs, PHEVs, and FCVs in the market. The desired end result is a technically and commercially verified integrated ETS (Electric Traction System) product design that can be manufactured and distributed through a broad network of competitive suppliers to all auto manufacturers. The objectives of this FCVT program are to develop advanced technologies for an integrated ETS capable of 55kW peak power for 18 seconds and 30kW of continuous power. Additionally, to accommodate a variety of automotive platforms the ETS design should be scalable to 120kW peak power for 18 seconds and 65kW of continuous power. The ETS (exclusive of the DC/DC Converter) is to cost no more than $660 (55kW at $12/kW) to produce in quantities of 100,000 units per year, should have a total weight less than 46kg, and have a volume less than 16 liters. The cost target for the optional Bi-Directional DC/DC Converter is $375. The goal is to achieve these targets with the use of engine coolant at a nominal temperature of 105C. The system efficiency should exceed 90% at 20% of rated torque over 10% to 100% of maximum speed. The nominal operating system voltage is to be 325V, with consideration for higher voltages. This project investigated a wide range of technologies, including ETS topologies, components, and interconnects. Each technology and its validity for automotive use were verified and then these technologies were integrated into a high temperature ETS design that would support a wide variety of applications (fuel cell, hybrids, electrics, and plug-ins). This ETS met all the DOE 2010 objectives of cost, weight, volume and efficiency, and the specific power and power density 2015 objectives. Additionally a bi-directional converter was developed that provides charging and electric power take-off which is the first step towards enabling a smart-grid application. GM under this work assessed 29 technologies; investigated 36 configurations/types power electronics and electric machines, filed 41 invention disclosures; and ensured technology compatibility with vehicle production. Besides the development of a high temperature ETS the development of industrial suppliers took place because of this project. Suppliers of industrial power electronic components are numerous, but there are few that have traction drive knowledge. This makes it difficult to achieve component reliability, durability, and cost requirements necessary of high volume automotive production. The commercialization of electric traction systems for automotive industry requires a strong diverse supplier base. Developing this supplier base is dependent on a close working relationship between the OEM and supplier so that appropriate component requirements can be developed. GM has worked closely with suppliers to develop components for electric traction systems. Components that have been the focus of this project are power modules, capacitors, heavy copper boards, current sensors, and gate drive and controller chip sets. Working with suppliers, detailed component specifications have been developed. Current, voltage, and operation environment during the vehicle drive cycle were evaluated to develop higher resolution/accurate component specifications.

Greg Smith; Charles Gough

2011-08-31T23:59:59.000Z

376

Integrated Dynamic Gloabal Modeling of Land Use, Energy and Economic Growth  

SciTech Connect

The overall objective of this collaborative project is to integrate an existing general equilibrium energy-economic growth model with a biogeochemical cycles and biophysical models in order to more fully explore the potential contribution of land use-related activities to future emissions scenarios. Land cover and land use change activities, including deforestation, afforestation, and agriculture management, are important source of not only CO2, but also non-CO2 GHGs. Therefore, contribution of land-use emissions to total emissions of GHGs is important, and consequently their future trends are relevant to the estimation of climate change and its mitigation. This final report covers the full project period of the award, beginning May 2006, which includes a sub-contract to Brown University later transferred to the National Center for Atmospheric Research (NCAR) when Co-PI Brian O'Neill changed institutional affiliations.

Atul Jain, University of Illinois, Urbana-Champaign, IL Brian O'Neill, NCAR, Boulder, CO

2009-10-14T23:59:59.000Z

377

Integrated safety management system verification: Volume 1  

SciTech Connect

Department of Energy (DOE) Policy (P) 450.4, Safety Management System Policy, commits to institutionalizing an Integrated Safety Management System (ISMS) throughout the DOE complex. The DOE Acquisition Regulations (DEAR 48 CFR 970) requires contractors to manage and perform work in accordance with a documented Integrated Safety Management System. The Manager, Richland Operations Office (RL), initiated a combined Phase 1 and Phase 2 Integrated Safety Management Verification review to confirm that PNNL had successfully submitted a description of their ISMS and had implemented ISMS within the laboratory facilities and processes. A combined review was directed by the Manager, RL, based upon the progress PNNL had made in the implementation of ISM. This report documents the results of the review conducted to verify: (1) that the PNNL integrated safety management system description and enabling documents and processes conform to the guidance provided by the Manager, RL; (2) that corporate policy is implemented by line managers; (3) that PNNL has provided tailored direction to the facility management; and (4) the Manager, RL, has documented processes that integrate their safety activities and oversight with those of PNNL. The general conduct of the review was consistent with the direction provided by the Under Secretary`s Draft Safety Management System Review and Approval Protocol. The purpose of this review was to provide the Manager, RL, with a recommendation to the adequacy of the ISMS description of the Pacific Northwest Laboratory based upon compliance with the requirements of 49 CFR 970.5204(-2 and -78); and, to provide an evaluation of the extent and maturity of ISMS implementation within the Laboratory. Further, this review was intended to provide a model for other DOE Laboratories. In an effort to reduce the time and travel costs associated with ISM verification the team agreed to conduct preliminary training and orientation electronically and by phone. These activities are normally conducted during a pre-visit trip to the site. The Team recommends approval of the Integrated Safety Management System Description subject to the resolution of the Areas of Concerns noted here.

Christensen, R.F.

1998-08-12T23:59:59.000Z

378

Hanford Single-Shell Tank Integrity Program  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Operations Contract Hanford Single Hanford Single- -Shell Shell Hanford Single Hanford Single Shell Shell Tank Integrity Tank Integrity Program Program Herbert S Berman Herbert S Berman Herbert S. Berman Herbert S. Berman July 29, 2009 July 29, 2009 1 Page 1 Tank Operations Contract Introduction * The Hanford site's principle historic mission was plutonium production for the manufacture of nuclear weapons. * Between 1944 and 1988, the site operated nine graphite- moderated light-water production reactors to irradiate moderated, light-water, production reactors to irradiate fuel and produce plutonium. * Four large chemical separations plants were run to extract plutonium from the fuel, and a variety of laboratories, support facilities, and related infrastructure to support production

379

Center for Integrated Nanotechnologies 2011 Annual Report  

Science Conference Proceedings (OSTI)

We are pleased to share with you this 2011 edition of the Annual Report from the Center for Integrated Nanotechnologies (CINT) and the growing excitement we feel around cementing our brand as a leader in integration nanoscience. This can be seen most readily in the momentum we have achieved in our signature Integration Focus Activities (IFAs). These efforts unite our scientists across our four scientific Thrust areas with our users to concentrate research on larger-scale nanoscience integration challenges for specific classes of nanomaterials, systems, and phenomena. All three of our current IFAs (p. 10) now have a full head of steam, and nearly 30% of our current user projects map in some meaningful way to one of these IFAs. As part of our redoubled effort to increase our industrial user base, we are also looking to leverage these IFAs to build a stronger link to and spur recruitment within our industrial user community. We believe that the IFAs are a natural community-building tool with an intrinsic value proposition for industry; an R&D pipeline that can lead to more mature, more commercially well-positioned technologies. Finally, as nanoscience and nanotechnology are maturing, we as a research community are beginning to see our efforts extend in many exciting new directions. Our focus on nanoscience integration positions us very well to capitalize on new opportunities including the emerging Mesoscale Initiative within the DOE Office of Science. Many aspects of mesoscale science are embodied in the integration of nanoscale building blocks. We are equally proud of our continuing strong performance in support of our user program. We have fully transitioned to our new user proposal database providing enhanced convenience and flexibility for proposal submission and review. In our two regular proposal calls this year we received a total of 225 proposals, an increase of 10% over our 2010 performance. Our official count on number of users for the period remains at {approx}350 and continues to reflect full engagement of our scientific staff. We are also seeing a steady increase in our industrial user base, with the number of industrial proposals (including Rapid Access proposals) doubling in 2011. We attribute this in part of our outreach efforts including our focused industrial session in each of our past two annual User Conferences. The Center for Integrated Nanotechnologies (CINT) is a Department of Energy/Office of Science Nanoscale Science Research Center (NSRC) operating as a national user facility devoted to establishing the scientific principles that govern the design, performance, and integration of nanoscale materials. Jointly operated by Los Alamos and Sandia National Laboratories, CINT explores the continuum from scientific discovery to use-inspired research, with a focus on the integration of nanoscale materials and structures to achieve new properties and performance and their incorporation into the micro- and macro worlds. Through its Core Facility at Sandia National Laboratories and its Gateway Facility at Los Alamos National Laboratory, CINT provides open access to tools and expertise needed to explore the continuum from scientific discovery to the integration of nanostructures into the micro- and macro worlds. In its overall operations, CINT strives to achieve the following goals common to all Nanoscale Science Research Centers: (1) Conduct forefront research in nanoscale science; (2) Operate as a user facility for scientific research; (3) Provide user access to the relevant BES-supported expertise and capabilities at the host national laboratory; and (4) Leverage other relevant national laboratory capabilities to enhance scientific opportunities for the nanoscience user community. These additional goals are specific to the unique CINT mission: (5) Establish and lead a scientific community dedicated to solving nanoscale science integration challenges; and (6) Create a single user facility program that combines expertise and facilities at both Los Alamos and Sandia National Laboratories. The CINT user pro

Sanders, Antonya [Los Alamos National Laboratory

2012-06-21T23:59:59.000Z

380

Integrated fuel processor development.  

DOE Green Energy (OSTI)

The Department of Energy's Office of Advanced Automotive Technologies has been supporting the development of fuel-flexible fuel processors at Argonne National Laboratory. These fuel processors will enable fuel cell vehicles to operate on fuels available through the existing infrastructure. The constraints of on-board space and weight require that these fuel processors be designed to be compact and lightweight, while meeting the performance targets for efficiency and gas quality needed for the fuel cell. This paper discusses the performance of a prototype fuel processor that has been designed and fabricated to operate with liquid fuels, such as gasoline, ethanol, methanol, etc. Rated for a capacity of 10 kWe (one-fifth of that needed for a car), the prototype fuel processor integrates the unit operations (vaporization, heat exchange, etc.) and processes (reforming, water-gas shift, preferential oxidation reactions, etc.) necessary to produce the hydrogen-rich gas (reformate) that will fuel the polymer electrolyte fuel cell stacks. The fuel processor work is being complemented by analytical and fundamental research. With the ultimate objective of meeting on-board fuel processor goals, these studies include: modeling fuel cell systems to identify design and operating features; evaluating alternative fuel processing options; and developing appropriate catalysts and materials. Issues and outstanding challenges that need to be overcome in order to develop practical, on-board devices are discussed.

Ahmed, S.; Pereira, C.; Lee, S. H. D.; Krumpelt, M.

2001-12-04T23:59:59.000Z

Note: This page contains sample records for the topic "integration activities related" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Systems Integration Methodology  

Science Conference Proceedings (OSTI)

A multi-disciplinary team led by the Advanced Power and Energy Program (APEP) of the University of California at Irvine is defining the system engineering issues associated with the integration of key components and subsystems into power plant systems that meet performance and emission goals of VISION 21. The myriad of fuels, fuel processing, power generation, and emission control technologies are narrowed down to selected scenarios by a screening analysis to identify those combinations that have the potential to achieve the VISION 21 goals consisting of 60% efficiency (HHV) for coal based systems and 75% efficiency (LHV) for gas-based systems. The selected promising cycle scenarios are then analyzed in detail to develop the performance and costs for each. The methodology used in arriving at these promising cases and the preliminary results of the cycle analyses are presented. The technology levels considered are based on projected technical and manufacturing advances being made in industry and on advances identified in current and future government supported research such as the Clean Coal Program, Combustion 2000 (LEBS and HIPPS), Advanced Turbine Systems program, Low-Cost Advanced Fuel Cell programs, and the Flexible Gas Turbine Systems program. Examples of systems included in these advanced cycles are solid oxide and molten carbonate fuel cells, advanced gas turbines, ion transport membrane separation and hydrogen-oxygen combustion.

Samuelsen, Scott; Rao, Ashok

2001-11-06T23:59:59.000Z

382

Repast Vector GIS Integration  

E-Print Network (OSTI)

This paper will elucidate the creation of agents based on GIS data, as well as how to work with and display those agents. Specific attention is given to the usage of both ArcMap and OpenMap. Contact: 9700 S. Cass Avenue, Argonne, IL 60439 Tel: 1-917-703-4633 Email: rnajlis@anl.gov Key Words: Agent-Based Modeling and Simulation, Repast, GIS, Geographic Information Systems, Repast, ArcMap, OpenMap Robert Najlis, Michael J. North Repast now supports the reading, writing, and display of shapefile data. In the Repast-GIS integration, these tasks are generally broken up into two different classes, a data class, and a display class. The data class allows data to be read into Repast from the GIS, and written out from Repast into a GIS format. The current implementation of GIS in Repast is focused on two systems: ESRI ArcMap and OpenMap. This paper will elucidate how to use each of these systems with Repast. Getting started: Choosing your data and display classes Each GIS system used with Re

Robert Najlis; Robert Najlis; Robert Najlis; Michael J. North; Michael J. North

2005-01-01T23:59:59.000Z

383

Federally Funded Programs Related to Building Energy Use: Overlaps, Challenges, and Opportunities for Collaboration  

SciTech Connect

As energy efficiency in buildings continues to move from discreet technology development to an integrated systems approach, the need to understand and integrate complementary goals and targets becomes more pronounced. Whether within Department of Energy抯 (DOE) Building Technologies Program (BTP), across the Office of Energy Efficiency and Renewable Energy (EERE), or throughout DOE and the Federal government, mutual gains and collaboration synergies exist that are not easily achieved because of organizational and time constraints. There also cases where federal agencies may be addressing similar issues, but with different (and sometimes conflicting) outcomes in mind. This report conducts a comprehensive inventory across all EERE and other relevant Federal agencies of potential activities with synergistic benefits. A taxonomy of activities with potential interdependencies is presented. The report identifies a number of federal program objectives, products, and plans related to building energy efficiency and characterizes the current structure and interactions related to these plans and programs. Areas where overlap occurs are identified as are the challenges of addressing issues related to overlapping goals and programs. Based on the input gathered from various sources, including 20 separate interviews with federal agency staff and contractor staff supporting buildings programs, this study identifies a number of synergistic opportunities and makes recommends a number of areas where further collaboration could be beneficial.

Cort, Katherine A.; Butner, Ryan S.; Hostick, Donna J.

2010-10-01T23:59:59.000Z

384

Integral transformation and Darboux transformation  

E-Print Network (OSTI)

We review Darboux-Crum transformation of Heun's differential equation. By rewriting an integral transformation of Heun's differential equation into a form of elliptic functions, we see that the integral representation is a generalization of Darboux-Crum transformation. We also consider conservation of monodromy with respect to the transformations.

Takemura, Kouichi

2009-01-01T23:59:59.000Z

385

CFT, Integrable Models Liouville Gravity  

E-Print Network (OSTI)

CFT, Integrable Models And Liouville Gravity Chernogolovka 2009 Sunday June 28, 2009. Conference as one of components of their L, A pairs. #12;CFT, Integrable Models And Liouville Gravity Chernogolovka Gravity Chernogolovka, 2009 Tuesday June 30, 2009. CONFERENCE HALL 09:30颅10:10 Herman Boos (Wuppertal

Fominov, Yakov

386

HGIP: Haitian government integrated platform  

Science Conference Proceedings (OSTI)

This paper describes the HGIP initiative to equip Haitian government with an integrated system to monitor reconstruction efforts and improve governance. In its current status, this IDB funded project is seeking to integrate various systems and databases ... Keywords: e-governance, inter-organizational information sharing, public administration reform, whole-of-government approach

Carl Sherson Clermont

2011-09-01T23:59:59.000Z

387

Integrated Transportation System Design Optimization  

E-Print Network (OSTI)

Integrated Transportation System Design Optimization by Christine Taylor B.S. Cornell University by . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Professor Jaime Peraire Chairman, Department Graduate Committee #12;2 #12;Integrated Transportation System Abstract Traditionally, the design of a transportation system has focused on either the vehicle design

388

May 20,2009, DOE Annual Reports to Congress On Board-Related...  

NLE Websites -- All DOE Office Websites (Extended Search)

Strengthened Quality Assurance Function II-2 C. DOE Project for Reviewing its Safety Directives II-3 D. Other Nuclear Safety Policy and Assistance Activities II-4 E. Integrated...

389

Major Risk Factors to the Integrated Facility Disposition Project  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Oak Ridge Reservation Tennessee Major Risk Factors to the Integrated Facility Disposition Project (IFDP) Challenge The scope of the Integrated Facility Disposition Project (IFDP) needs to comprehensively address a wide range of environmental management risks at the Oak Ridge Reservation (ORO). These include: environmental remediation, regulatory compliance, deactivation and decommissioning (D&D) activities, and disposition of legacy materials and waste, along with the ongoing modernization, reindustrialization, and reconfiguration initiatives at the Oak Ridge National Laboratory and at the Y-12 National Security Complex. The balancing of the broad nature of these activities and issues at ORO are a key challenge for the IFDP especially since their interrelationship is not always obvious.

390

Novel Optimization Methodology for Welding Process/Consumable Integration  

Science Conference Proceedings (OSTI)

Advanced materials are being developed to improve the energy efficiency of many industries of future including steel, mining, and chemical, as well as, US infrastructures including bridges, pipelines and buildings. Effective deployment of these materials is highly dependent upon the development of arc welding technology. Traditional welding technology development is slow and often involves expensive and time-consuming trial and error experimentation. The reason for this is the lack of useful predictive tools that enable welding technology development to keep pace with the deployment of new materials in various industrial sectors. Literature reviews showed two kinds of modeling activities. Academic and national laboratory efforts focus on developing integrated weld process models by employing the detailed scientific methodologies. However, these models are cumbersome and not easy to use. Therefore, these scientific models have limited application in real-world industrial conditions. On the other hand, industrial users have relied on simple predictive models based on analytical and empirical equations to drive their product development. The scopes of these simple models are limited. In this research, attempts were made to bridge this gap and provide the industry with a computational tool that combines the advantages of both approaches. This research resulted in the development of predictive tools which facilitate the development of optimized welding processes and consumables. The work demonstrated that it is possible to develop hybrid integrated models for relating the weld metal composition and process parameters to the performance of welds. In addition, these tools can be deployed for industrial users through user friendly graphical interface. In principle, the welding industry users can use these modular tools to guide their welding process parameter and consumable composition selection. It is hypothesized that by expanding these tools throughout welding industry, substantial energy savings can be made. Savings are expected to be even greater in the case of new steels, which will require extensive mapping over large experimental ranges of parameters such as voltage, current, speed, heat input and pre-heat.

Quintana, Marie A; DebRoy, Tarasankar; Vitek, John; Babu, Suresh

2006-01-15T23:59:59.000Z

391

Risk and Work Configuration Management as a Function of Integrated Safety Management  

Science Conference Proceedings (OSTI)

National Security Technologies, LLC (NSTec), has established a work management program and corresponding electronic Facilities and Operations Management Information System (e-FOM) to implement Integrated Safety Management (ISM). The management of work scopes, the identification of hazards, and the establishment of implementing controls are reviewed and approved through electronic signatures. Through the execution of the program and the implementation of the electronic system, NSTec staff work within controls and utilize feedback and improvement process. The Integrated Work Control Manual further implements the five functions of ISM at the Activity level. By adding the Risk and Work Configuration Management program, NSTec establishes risk acceptance (business and physical) for liabilities within the performance direction and work management processes. Requirements, roles, and responsibilities are specifically identified in the program while e-FOM provides the interface and establishes the flowdown from the Safety Chain to work and facilities management processes to company work-related directives, and finally to Subject Matter Expert concurrence. The Program establishes, within the defined management structure, management levels for risk identification, risk mitigation (controls), and risk acceptance (business and physical) within the Safety Chain of Responsibility. The Program also implements Integrated Safeguards and Security Management within the NSTec Safety Chain of Responsibility. Once all information has been entered into e-FOM, approved, and captured as data, the information becomes searchable and sortable by hazard, location, organization, mitigating controls, etc.

Lana Buehrer, Michele Kelly, Fran Lemieux, Fred Williams

2007-11-30T23:59:59.000Z

392

Integrated approach towards the Application of Horizontal Wells to Improve Waterflooding Performance. Annual report  

SciTech Connect

This annual report describes the progress during the first year of the project on Integrated Approach Towards the Application of Horizontal Wells to Improve Waterflooding Performance. This project is funded under the Department of Energy`s Class I program which is targeted towards improving the reservoir performance of mature oil fields located in fluvial-dominated deltaic deposits. The project involves an integrated approach to characterize the reservoir followed by drilling of horizontal injection wells to improve production performance. The type of data the authors intend to integrate includes cross bore hole seismic surveys, geological interpretation based on logs and cores, and engineering information. This report covers the first phase of the project which includes a detailed reservoir description of the field based on the available information, followed by flow simulation of the Self Unit to compare the simulated result with the historical performance. Based on the simulated results, a vertical test well was drilled to validate this reservoir description. The well will also be used as a source well for a cross bore hole seismic survey. This report discusses the related geophysical, geological and engineering activities leading to the drilling of the vertical test well. The validation phase and the collection of the cross bore hole survey has just begun, and the results will be presented in the next annual report.

Kelkar, M.; Liner, C.; Kerr, D.

1994-06-01T23:59:59.000Z

393

Integrated fuel cell energy systems for modern buildings. Final technical report for contract period October 1997 to September 2001  

DOE Green Energy (OSTI)

This report summarizes the activities and results of a cooperative agreement. The scope focused on natural gas fuel processing subsystems for fuel cell systems that could be used in modern buildings. The focus of this project was the development of a natural gas (NG) fueled, fuel processing subsystem (FPS) for polymer electrolyte membrane (PEM) fuel cell systems in modern buildings applications. This cooperative development program was coordinated with several parallel programs that were related to integrated fuel processor developments for fuel cell systems. The most significant were the development of an integrated fuel-flexible, fuel processing subsystem (DE-FC02-97EE0482) and internal HbT programs to develop autothermal reforming (ATR) technologies and to develop a commercially viable stationary subsystem.

Woods, Richard

2001-09-27T23:59:59.000Z

394

Integrated power management for microsystems  

DOE Green Energy (OSTI)

There is a need for a universal power module for microsystems. This module should provide power conditioning, energy storage, and load matching for a variety of energy sources and loads such as microelectromechanical systems (MEMS) and wireless sensors and micro-robots. There are a variety of potential ambient and human powered energy sources, which can supply some of the power needs of the military. The challenge is to capture these available sources of electrical energy and condition them to meet the voltage, current, and overall power demands of field-deployable microelectronics and MEMs-based devices such as wireless sensors and micro-robots. Most natural and man-made energy sources found in the environment have a low specific power and are not generally available on a continuous basis. Likewise, human-based energy sources must be optimally managed to meet the power needs in the field. Therefore, a power supply must have the ability to capture the available energy and store it in such a manner to be useful to meet the mission requirements of the device that is connected to the source. It must continuously monitor the status of energy stored and determine the expected demands of the device. A microelectronics-based power management chip can be developed to meet these objectives. The major challenge in realizing this concept will be the design of an intelligent power-conditioning chip that consumes a minimum of power to perform the functions of power conditioning, storage, load matching, and status monitoring. The prototype power conditioning integrated circuit would be capable of delivering a peak power of 100 mW at 5 V. The nominal operating condition would be a very low duty cycle for a relatively high power load, and a low-power source available for long periods of time, or a moderate-power source available intermittently.

Fry, D.N.; Wintenberg, A.L.; Bryan, B.L. [Oak Ridge National Lab., TN (United States). Instrumentation and Controls Div.

1997-12-01T23:59:59.000Z

395

Integral Transforms in Relativistic Quantum Constraint Mechanics  

E-Print Network (OSTI)

In relativistic quantum constraint mechanics the state of a physical system is constrained to a 3-dimensional subspace of Minkowski 4-space. Fourier transformation can be used to relate this state between constraint spaces in 4-position and 4-momentum space. It is shown that integral transforms of this nature can be carried out using Lorentz-invariant 3-dimensional constraint space coordinates such that a complete equivalence class of 4-space representations can be constructed from the transform. This method is further applied to develop a relativistic generalization of the Segal-Bargmann transformation that leads to the representation of quantum systems in a three-dimensional subspace of Bargmann 4-space.

Robert J. Ducharme

2011-01-29T23:59:59.000Z

396

Integrated Global Nuclear Materials Management - Preliminary Concepts -  

SciTech Connect

Approach to Connect Global Objectives and Local Actions: (1) Articulate global objectives into a hierarchy of subsystem requirements and local attributes and measures; (2) Establish a baseline system and viable alternatives through the interactions and relationships (e.g., networks) of local system elements and their options; (3) Evaluate performance of system alternatives and develop improved nuclear material management strategies and technologies; and (4) The need to address greatest concerns first (prioritized or graded approach) and to make tradeoffs among implementation options and competing objectives entails a risk-based approach. IGNMM could provide a systematic understanding of global nuclear materials management and evolutionarily improve and integrate the management through an active architecture, using for example, situation awareness, system models, methods, technologies, and international cooperation. Different tools would be used within the overall framework to address individual issues on the desired geographic scale that could be easily linked to broader analyses. Life-cycle system analyses would allow for evaluating material path alternatives on an integrated global scale. Disconnects, overlaps, technical options, and alternatives for optimizing nuclear materials processes could be evaluated in an integrated manner.

Dreicer, M; Jones, E; Richardson, J

2006-07-13T23:59:59.000Z

397

Measurement of thermal neutron cross section and resonance integral for the {sup 170}Er(n,{gamma}){sup 171}Er reaction by using a {sup 55}Mn monitor  

Science Conference Proceedings (OSTI)

The thermal neutron cross section and the resonance integral of the reaction {sup 170}Er(n,{gamma}){sup 171}Er were measured by the Cd-ratio method using a {sup 55}Mn monitor as single comparator. Analytical grade MnO{sub 2} and Er{sub 2}O{sub 3} powder samples with and without a cylindrical 1 mm Cd shield box were irradiated in an isotropic neutron field obtained from three {sup 241}Am-Be neutron sources. The induced activities in the samples were measured with a 120.8% relative efficiency p-type HPGe detector. The correction factors for gamma-ray attenuation (F{sub g}), thermal neutron self-shielding (G{sub th}), and resonance neutron self-shielding (G{sub epi}) effects, and the epithermal neutron spectrum shape factor ({alpha}) were taken into account. The thermal neutron cross section for the (n,{gamma}) reaction in {sup 170}Er has been determined to be 8.00 {+-} 0.56 b, relative to that of the {sup 55}Mn monitor. However, some previously reported experimental results compared to the present result show a large discrepancy ranging from 8.3 to 86%. The present result is, in general, in good agreement with the recently measured values by 9%. According to the definition of Cd cut-off energy at 0.55 eV, the resonance integral obtained is 44.5 {+-} 4.0 b, which is determined relative to the reference integral value of the {sup 55}Mn monitor by using cadmium ratios. The existing experimental data for the resonance integral are distributed between 18 and 43 b. The present resonance integral value agrees only with the measurement of 43 {+-} 5 b by Gillette [Thermal Cross Section and Resonance Integral Studies, ORNL-4155, 15 (1967)] within uncertainty limits.

Yuecel, Haluk [Turkish Atomic Energy Authority (TAEK), Besevler Campus, 06100 Tandogan-Ankara (Turkey); Budak, M. Gueray; Karadag, Mustafa [Gazi University, Gazi Education Faculty, 06500 Teknikokullar-Ankara (Turkey)

2007-09-15T23:59:59.000Z

398

NREL: Transmission Grid Integration - Oahu Wind Integration and...  

NLE Websites -- All DOE Office Websites (Extended Search)

Agreement. The agreement includes a commitment to integrate up to 400 megawatts (MW) of offshore wind energy from Molokai or Lanai and transmit it to Oahu via undersea cable...

399

Integrating Ceramics and Metals Via Active Metal Brazing ...  

Science Conference Proceedings (OSTI)

Environmental Assessment of Li-CNT Battery Production ... The Production of High-Quality Magnesite Ore Concentrate With Permroll Type Magnetic Separator.

400

Active heat transfer enhancement in integrated fan heat sinks  

E-Print Network (OSTI)

Modern computer processors require significant cooling to achieve their full performance. The "efficiency" of heat sinks is also becoming more important: cooling of electronics consumes 1% of worldwide electricity use by ...

Staats, Wayne Lawrence

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "integration activities related" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

United States country report for IEA integrated bioenergy systems activity  

SciTech Connect

This paper describes efforts to model hybrid poplar and switchgrass production costs and supply curves. Estimates of the full economic cost of producing switchgrass bales and hybrid poplar chips in six US regions are presented. Average production costs vary by region and yield, ranging from $US 25 to $62/dry ton for switchgrass bales and $US 30 to $86/dry ton for poplar chips. Biomass prices are generally lower for switchgrass than for hybrid poplar, and are higher in the Lake States and Corn Belt than for other regions. Estimated national biomass supply curves are also presented. Assuming average US yields of 5 dry ton/acre/year, approximately 300 million dry tons of switchgrass could be supplied nationally at farm-gate prices of less than $30/dry ton. Approximately 250 million dry tons of woody crops can be potentially supplied nationally at farm-gate prices of less than $40/dry ton. This is enough biomass to produce 24 to 33 billion gallons of ethanol at a feedstock price of $0.36 to $0.63/gal (depending on conversion efficiency), or 600 billion kWh at a price of $0.04 to $0.05/kWh.

Walsh, M.E.

1995-09-22T23:59:59.000Z

402

Laser Micromachining of Active and Passive Photonic Integrated Circuits  

E-Print Network (OSTI)

This thesis describes the development of advanced laser resonators and applications of laserinduced micromachining for photonic circuit fabrication. Two major advantages of laserinduced micromachining are direct patterning ...

Cho, Seong-Ho

2006-06-28T23:59:59.000Z

403

Probe with integrated heater and thermocouple pack  

DOE Patents (OSTI)

A probe for measuring heat includes an elongate rod fitted within a sheath, and a plurality of annular recesses are formed on the surface of the rod in a spaced-apart relationship to form annular chambers that are resistant to heat flow. A longitudinal bore extends axially into the rod and within the cylinders defined by the annular chambers, and an integrated heater and thermocouple pack is dimensioned to fit within the bore. In construction, the integrated pack includes a plurality of wires disposed in electrical insulation within a sheath and a heater cable. These wires include one common wire and a plurality of thermocuple wires. The common wire is constructed of one type of conductive material while the thermocouple wires are each constructed of two types of materials so that at least one thermocouple junction is formed therein. All of the wires extend the length of the integrated pack and are connected together at their ends. The thermocouple wires are constructed to form thermocouple junctions proximate to each annular chamber for producing electromotive forces corresponding to the temperature of the rod within the annular chambers relative to outside the chambers. In the preferred embodiment, each thermocouple wire forms two thermocouple junctions, one junction being disposed within an annular chamber and the second junction being disposed outside of, but proximate to, the same annular chamber. In one embodiment two thermocouple wires are configured to double the sensitivity of the probe in one region.

McCulloch, Reg W. (Oak Ridge, TN); Dial, Ralph E. (Concord, TN); Finnell, Wilber K. R. (Kingston, TN)

1990-01-01T23:59:59.000Z

404

Probe with integrated heater and thermocouple pack  

DOE Patents (OSTI)

A probe for measuring heat includes an elongate rod fitted within a sheath, and a plurality of annular recesses are formed on the surface of the rod in a spaced-apart relationship to form annular chambers that are resistant to heat flow. A longitudinal bore extends axially into the rod and within the cylinders defined by the annular chambers, and an integrated heater and thermocouple pack is dimensioned to fit within the bore. In construction, the integrated pack includes a plurality of wires disposed in electrical insulation within a sheath and a heater cable. These wires include one common wire and a plurality of thermocouple wires. The common wire is constructed of one type of conductive material while the thermocouple wires are each constructed of two types of materials so that at least one thermocouple junction is formed therein. All of the wires extend the length of the integrated pack and are connected together at their ends. The thermocouple wires are constructed to form thermocouple junctions proximate to each annular chamber for producing electromotive forces corresponding to the temperature of the rod within the annular chambers relative to outside the chambers. In the preferred embodiment, each thermocouple wire forms two thermocouple junctions, one junction being disposed within an annular chamber and the second junction being disposed outside of, but proximate to, the same annular chamber. In one embodiment two thermocouple wires are configured to double the sensitivity of the probe in one region.

McCulloch, Reginald W. (Oak Ridge, TN); Dial, Ralph E. (Concord, TN); Finnell, Wilber K. R. (Kingston, TN)

1988-01-01T23:59:59.000Z

405

NREL: Distributed Grid Integration - Projects  

NLE Websites -- All DOE Office Websites (Extended Search)

Projects Projects Photo of two NREL engineers sitting in front of two computer monitors, discussing a project. NREL engineers work on data capture for micro-grid synchronization waveforms. Photo by Dennis Schroeder, NREL. NREL's distributed energy projects support the integration of new technologies into the electric power grid. This work involves industry, academia, other national laboratories, and various standards organizations. Learn more about our projects: Codes and standards Data collection and visualization Hawaii Clean Energy Initiative Microgrids Power systems modeling Solar Distributed Grid Integration (SunShot) Technology development Vehicle-to-Grid (V2G) Wind2Battery Printable Version Distributed Grid Integration Home Capabilities Projects Codes & Standards

406

Fully Integrating the Design Process  

SciTech Connect

The basic approach to designing nuclear facilities in the United States does not currently reflect the routine consideration of proliferation resistance and international safeguards. The fully integrated design process is an approach for bringing consideration of international safeguards and proliferation resistance, together with state safeguards and security, fully into the design process from the very beginning, while integrating them sensibly and synergistically with the other project functions. In view of the recently established GNEP principles agreed to by the United States and at least eighteen other countries, this paper explores such an integrated approach, and its potential to help fulfill the new internationally driven design requirements with improved efficiencies and reduced costs.

T.A. Bjornard; R.S. Bean

2008-03-01T23:59:59.000Z

407

Integration of EBS Models with Generic Disposal System Models | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Integration of EBS Models with Generic Disposal System Models Integration of EBS Models with Generic Disposal System Models Integration of EBS Models with Generic Disposal System Models This report summarizes research activities on engineered barrier system (EBS) model integration with the generic disposal system model (GDSM), and used fuel degradation and radionuclide mobilization (RM) in support of the EBS evaluation and tool development within the Used Fuel Disposition campaign. This report addresses: predictive model capability for used nuclear fuel degradation based on electrochemical and thermodynamic principles, radiolysis model to evaluate the U(VI)-H2O-CO2 system, steps towards the evaluation of uranium alteration products, discussion of instant release fraction (IRF) of radionuclides from the nuclear fuel, and

408

Integration of EBS Models with Generic Disposal System Models | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Integration of EBS Models with Generic Disposal System Models Integration of EBS Models with Generic Disposal System Models Integration of EBS Models with Generic Disposal System Models This report summarizes research activities on engineered barrier system (EBS) model integration with the generic disposal system model (GDSM), and used fuel degradation and radionuclide mobilization (RM) in support of the EBS evaluation and tool development within the Used Fuel Disposition campaign. This report addresses: predictive model capability for used nuclear fuel degradation based on electrochemical and thermodynamic principles, radiolysis model to evaluate the U(VI)-H2O-CO2 system, steps towards the evaluation of uranium alteration products, discussion of instant release fraction (IRF) of radionuclides from the nuclear fuel, and

409

Research and Institutional Integrity Office at Berkeley Lab  

NLE Websites -- All DOE Office Websites (Extended Search)

Contacts Contacts Responsible Conduct of Research Resources Authorship Collaborations ORI Responsible Conduct of Research Educational Resources Mentoring Best Practices Complied by UCSD LBNL Policy on Research Misconduct - RPM 2.05I Research Integrity All persons engaged in research at the Laboratory are responsible for adhering to the highest standards of research integrity. Activities that fall short of the basic ethical principles inherent in the research process undermine the scientific enterprise. Our office is here to assist you in learning about responsible conduct of research and to address questions, concerns, and allegations of possible research misconduct. Under the Laboratory's research misconduct policy (RPM 2.05I) the Head of the Research and Institutional Integrity Office is the Research Integrity

410

Agricultural Industrial Relations Bibliography  

E-Print Network (OSTI)

Relations Act: Report. Sacramento, CA: Office of the AuditorLabor Relations Law. Sacramento, CA: California Agricultural1975-76 and 1976-77. Sacramento, CA: California Agricultural

Brown, Cheryl L.; Dote, Grace; Edmonds, Christopher M.; Perloff, Jeffrey M.; Rosenberg, Howard R.; Xiong, Nanyan

1991-01-01T23:59:59.000Z

411

Status of data, major results, and plans for geophysical activities, Yucca Mountain Project  

Science Conference Proceedings (OSTI)

This report describes past and planned geophysical activities associated with the Yucca Mountain Project and is intended to serve as a starting point for integration of geophysical activities. This report relates past results to site characterization plans, as presented in the Yucca Mountain Site Characterization Plan (SCP). This report discusses seismic exploration, potential field methods, geoelectrical methods, teleseismic data collection and velocity structural modeling, and remote sensing. This report discusses surface-based, airborne, borehole, surface-to-borehole, crosshole, and Exploratory Shaft Facility-related activities. The data described in this paper, and the publications discussed, have been selected based on several considerations; location with respect to Yucca Mountain, whether the success or failure of geophysical data is important to future activities, elucidation of features of interest, and judgment as to the likelihood that the method will produce information that is important for site characterization. 65 refs., 19 figs., 12 tabs.

Oliver, H.W. [Geological Survey, Menlo Park, CA (USA); Hardin, E.L. [Science Applications International Corp., Las Vegas, NV (USA); Nelson, P.H. [Geological Survey, Denver, CO (USA)] [eds.

1990-07-01T23:59:59.000Z

412

Highly Integrated Quality Assurance An Empirical Case  

SciTech Connect

Highly Integrated Quality Assurance An Empirical Case Drake Kirkham1, Amy Powell2, Lucas Rich3 1Quality Manager, Radioisotope Power Systems (RPS) Program, Idaho National Laboratory, P.O. Box 1625 M/S 6122, Idaho Falls, ID 83415-6122 2Quality Engineer, RPS Program, Idaho National Laboratory 3Quality Engineer, RPS Program, Idaho National Laboratory Contact: Voice: (208) 533-7550 Email: Drake.Kirkham@inl.gov Abstract. The Radioisotope Power Systems Program of the Idaho National Laboratory makes an empirical case for a highly integrated Quality Assurance function pertaining to the preparation, assembly, testing, storage and transportation of 238Pu fueled radioisotope thermoelectric generators. Case data represents multiple campaigns including the Pluto/New Horizons mission, the Mars Science Laboratory mission in progress, and other related projects. Traditional Quality Assurance models would attempt to reduce cost by minimizing the role of dedicated Quality Assurance personnel in favor of either functional tasking or peer-based implementations. Highly integrated Quality Assurance adds value by placing trained quality inspectors on the production floor side-by-side with nuclear facility operators to enhance team dynamics, reduce inspection wait time, and provide for immediate, independent feedback. Value is also added by maintaining dedicated Quality Engineers to provide for rapid identification and resolution of corrective action, enhanced and expedited supply chain interfaces, improved bonded storage capabilities, and technical resources for requirements management including data package development and Certificates of Inspection. A broad examination of cost-benefit indicates highly integrated Quality Assurance can reduce cost through the mitigation of risk and reducing administrative burden thereby allowing engineers to be engineers, nuclear operators to be nuclear operators, and the cross-functional team to operate more efficiently. Applicability of this case extends to any high-value, long-term project where traceability and accountability are determining factors.

Drake Kirkham; Amy Powell; Lucas Rich

2011-02-01T23:59:59.000Z

413

Research Integrity | ornl.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

About ORNL About ORNL Fact Sheet Brochure Diversity Leadership Team Organization History Environmental Policy Corporate Giving Research Integrity Who we are, aren't About ORNL Home | ORNL | About ORNL | Research Integrity SHARE Research Integrity From the Director ORNL Research Code of Conduct Research Misconduct ORNL Policy on Research Integrity From the Director We enjoy an excellent scientific reputation at ORNL, thanks to a solid record of ethical conduct in every aspect of research. It is essential to our future that we maintain and nurture this reputation. We also have a responsibility to mentor the next generation of researchers to ensure that they too understand and adhere to the highest standards of ethical conduct. ORNL's Research Code of Conduct was developed by a committee of

414

NREL's Energy Systems Integration Facility  

NLE Websites -- All DOE Office Websites (Extended Search)

NREL's Energy Systems Integration Facility Speaker(s): Benjamin Kroposki Date: January 14, 2013 - 12:00pm Location: 90-1099 Seminar HostPoint of Contact: Sila Kiliccote The...

415

NREL: Transmission Grid Integration - Webinars  

NLE Websites -- All DOE Office Websites (Extended Search)

Webinars Webinars Want updates about future transmission grid integration webinars and publications? Join our mailing list. NREL periodically offers webinars on transmission grid integration topics to provide insight into its research. Explore the resources below to learn more. Upcoming Webinars Please check back. Details on future meetings and workshops will be posted as they are available. Past Webinars Results from The Western Wind and Solar Integration Study Phase 2: An examination of how wind and solar power affect operations, costs, and emissions from fossil-fueled generators Wednesday, September 25, 2013 at 12:00 EDT (10:00 MDT) The Western Wind and Solar Integration Study Phase 2 (WWSIS-2), launched in 2011, examines the potential impacts of up to 33% wind and solar energy

416

Data Integration Using Web Services  

Science Conference Proceedings (OSTI)

In this paper we examine the opportunities for data integration in the context of the emerging Web Services systems development paradigm. The paper introduces the programming standards associated with Web Services and provides an example of how Web Services ...

Mark Hansen; Stuart E. Madnick; Michael Siegel

2003-01-01T23:59:59.000Z

417

OMC-INTEGRAL Memory Management  

Science Conference Proceedings (OSTI)

The management of the memory restrictions imposed by the processor (1750A) was one of the major difficulties found in designing the Software (SW) controlling the Optical Monitoring Camera (OMC) payload of the International Gamma Ray Laboratory (INTEGRAL) ...

Jose Manuel P閞ez Lobato; Eva Mart韓 Lobo

2002-06-01T23:59:59.000Z

418

Integral Effects of Deep Convection  

Science Conference Proceedings (OSTI)

The large-scale, integral effect of convective elements (plumes) constituting an open-ocean chimney is investigated both theoretically and with a plume-resolving numerical model. The authors consider an initially homogeneous 損atch of ocean of ...

Uwe Send; John Marshall

1995-05-01T23:59:59.000Z

419

Arnold Schwarzenegger INTEGRATED FORECAST AND  

E-Print Network (OSTI)

Arnold Schwarzenegger Governor INTEGRATED FORECAST AND RESERVOIR MANAGEMENT (INFORM) FOR NORTHERN; the former with primary contributions in the areas of climate and hydrologic forecasting and the latter Service (NWS) California Nevada River Forecast Center (CNRFC), the California Department of Water

420

Challenges in Integrating Renewable Technologies  

E-Print Network (OSTI)

PV, solar thermal, and wave. Breakthroughs are also needed in large-scale energy storage technologies reliability and econ- omy. The challenges of integrating high penetrations of renewable energy technologies

Note: This page contains sample records for the topic "integration activities related" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Multi-loop Feynman integrals and conformal quantum mechanics  

E-Print Network (OSTI)

New algebraic approach to analytical calculations of D-dimensional integrals for multi-loop Feynman diagrams is proposed. We show that the known analytical methods of evaluation of multi-loop Feynman integrals, such as integration by parts and star-triangle relation methods, can be drastically simplified by using this algebraic approach. To demonstrate the advantages of the algebraic method of analytical evaluation of multi-loop Feynman diagrams, we calculate ladder diagrams for the massless $\\phi^3$ theory. Using our algebraic approach we show that the problem of evaluation of special classes of Feynman diagrams reduces to the calculation of the Green functions for specific quantum mechanical problems. In particular, the integrals for ladder massless diagrams in the $\\phi^3$ scalar field theory are given by the Green function for the conformal quantum mechanics.

A. P. Isaev

2003-03-06T23:59:59.000Z

422

Integrated Model to Access the Global Environment | Open Energy Information  

Open Energy Info (EERE)

Integrated Model to Access the Global Environment Integrated Model to Access the Global Environment Jump to: navigation, search LEDSGP green logo.png FIND MORE DIA TOOLS This tool is part of the Development Impacts Assessment (DIA) Toolkit from the LEDS Global Partnership. Tool Summary LAUNCH TOOL Name: Integrated Model to Access the Global Environment (IMAGE) Agency/Company /Organization: PBL Netherlands Environmental Assessment Agency Focus Area: Biomass Complexity/Ease of Use: Advanced Website: themasites.pbl.nl/en/themasites/image/index.html Cost: Paid Equivalent URI: cleanenergysolutions.org/content/integrated-model-access-global-enviro Related Tools ENV-Linkages-KEI Model World Induced Technical Change Hybrid (WITCH) Global Trade and Analysis Project (GTAP) Model ... further results IMAGE is an ecological-environmental framework that simulates the

423

The University of Missouri Bioinformatics Consortium (UMBC) provides an integrated array of high performance computing and communications products  

E-Print Network (OSTI)

performance computing and communications products and related services to their users, including The University of Missouri Bioinformatics Consortium (UMBC) provides an integrated array of high

Glaser, Rainer

424

Review of Concrete Biodeterioration in Relation to Buried Nuclear Waste  

Science Conference Proceedings (OSTI)

Long-term storage of low level radioactive material in below ground concrete disposal units (DUs) (Saltstone Disposal Facility) is a means of depositing wastes generated from nuclear operations of the U.S. Department of Energy. Based on the currently modeled degradation mechanisms, possible microbial induced effects on the structural integrity of buried low level wastes must be addressed. Previous international efforts related to microbial impacts on concrete structures that house low level radioactive waste showed that microbial activity can play a significant role in the process of concrete degradation and ultimately structural deterioration. This literature review examines the recent research in this field and is focused on specific parameters that are applicable to modeling and prediction of the fate of concrete vaults housing stored wastes and the wastes themselves. Rates of concrete biodegradation vary with the environmental conditions, illustrating a need to understand the bioavailability of key compounds involved in microbial activity. Specific parameters require pH and osmotic pressure to be within a certain range to allow for microbial growth as well as the availability and abundance of energy sources like components involved in sulfur, iron and nitrogen oxidation. Carbon flow and availability are also factors to consider in predicting concrete biodegradation. The results of this review suggest that microbial activity in Saltstone, (grouted low level radioactive waste) is unlikely due to very high pH and osmotic pressure. Biodegradation of the concrete vaults housing the radioactive waste however, is a possibility. The rate and degree of concrete biodegradation is dependent on numerous physical, chemical and biological parameters. Results from this review point to parameters to focus on for modeling activities and also, possible options for mitigation that would minimize concrete biodegradation. In addition, key chemical components that drive microbial activity on concrete surfaces are discussed.

Turick, C; Berry, C.

2012-10-15T23:59:59.000Z

425

Spent fuel integrity during transportation  

SciTech Connect

The conditions of recent shipments of light water reactor spent fuel were surveyed. The radioactivity level of cask coolant was examined in an attempt to find the effects of transportation on LWR fuel assemblies. Discussion included potential cladding integrity loss mechanisms, canning requirements, changes of radioactivity levels, and comparison of transportation in wet or dry media. Although integrity loss or degradation has not been identified, radioactivity levels usually increase during transportation, especially for leaking assemblies.

Funk, C.W.; Jacobson, L.D.

1980-01-01T23:59:59.000Z

426

Model Transformations And Tool Integration  

E-Print Network (OSTI)

Model transformations are increasingly recognised as being of significant importance to many areas of software development and integration. Recent attention on model transformations has particularly focused on the OMG's Queries / Views / Transformations (QVT) Request for Proposals (RFP). In this paper I motivate the need for dedicated approaches to model transformations, particularly for the data involved in tool integration, outline the challenges involved, and then present a number of technologies and techniques which allow the construction of flexible, powerful and practical model transformations.

Laurence Tratt

2004-01-01T23:59:59.000Z

427

Integral Fast Reactor Program. Annual progress report, FY 1993  

Science Conference Proceedings (OSTI)

This report summarizes highlights of the technical progress made in the Integral Fast Reactor (IFR) Program in FY 1993. Technical accomplishments are presented in the following areas of the IFR technology development activities: (1) metal fuel performance, (2) pyroprocess development, (3) safety experiments and analyses, (4) core design development, (5) fuel cycle demonstration, and (6) LMR technology R and D.

Chang, Y.I.; Walters, L.C.; Laidler, J.J.; Pedersen, D.R.; Wade, D.C.; Lineberry, M.J.

1994-10-01T23:59:59.000Z

428

Integral Fast Reactor Program annual progress report, FY 1994  

Science Conference Proceedings (OSTI)

This report summarizes highlights of the technical progress made in the Integral Fast Reactor (IFR) Program in FY 1994. Technical accomplishments are presented in the following areas of the IFR technology development activities: metal fuel performance; pyroprocess development; safety experiments and analyses; core design development; fuel cycle demonstration; and LMR technology R&D.

Chang, Y.I.; Walters, L.C.; Laidler, J.J.; Pedersen, D.R.; Wade, D.C.; Lineberry, J.J.

1994-12-01T23:59:59.000Z

429

Integral Fast Reactor Program. Annual progress report, FY 1992  

Science Conference Proceedings (OSTI)

This report summarizes highlights of the technical progress made in the Integral Fast Reactor (IFR) Program in FY 1992. Technical accomplishments are presented in the following areas of the IFR technology development activities: (1) metal fuel performance, (2) pyroprocess development, (3) safety experiments and analyses, (4) core design development, (5) fuel cycle demonstration, and (6) LMR technology R&D.

Chang, Y.I.; Walters, L.C.; Laidler, J.J.; Pedersen, D.R.; Wade, D.C.; Lineberry, M.J.

1993-06-01T23:59:59.000Z

430

Integration of fluctuating energy by electricity price control  

E-Print Network (OSTI)

Integration of fluctuating energy by electricity price control Master Thesis Olivier Corradi can be activated by means of a varying electricity price. We will focus on the appliances that offer results in a price that may be characterised as the market price of electricity in the Nordic countries

431

Firm performance impacts of digitally enabled supply chain integration capabilities  

Science Conference Proceedings (OSTI)

Best practice exemplars suggest that digital platforms play a critical role in managing supply chain activities and partnerships that generate performance gains for firms. However, there is limited academic investigation on how and why information technology ... Keywords: IT infrastructure, customer relationships, operational excellence, revenue growth, supply chain integration, supply chain management

Arun Rai; Ravi Patnayakuni; Nainika Seth

2006-06-01T23:59:59.000Z

432

System integration of marketable subsystems (third collection of progress reports)  

DOE Green Energy (OSTI)

Six monthly progress reports are included, covering the period from July 1978 through December 1978. This NASA/MSFC activity calls for work in five major areas: systems integration of marketable subsystems; development, design, and building of site data acquisition subsystems; development and operation of the central data processing system; operation of the MSFC Solar Test Facility; and systems analysis. (MHR)

Not Available

1979-02-01T23:59:59.000Z

433

Foundations of uncertain-data integration  

Science Conference Proceedings (OSTI)

There has been considerable past work studying data integration and uncertain data in isolation. We develop the foundations for local-as-view (LAV) data integration when the sources being integrated are uncertain. We motivate two distinct settings ...

Parag Agrawal; Anish Das Sarma; Jeffrey Ullman; Jennifer Widom

2010-09-01T23:59:59.000Z

434

Integrability from an Abelian subgroup of the diffeomorphisms group  

Science Conference Proceedings (OSTI)

It has been known for some time that for a large class of nonlinear field theories in Minkowski space with two-dimensional target space the complex eikonal equation defines integrable submodels with infinitely many conservation laws. These conservation laws are related to the area-preserving diffeomorphisms on target space. Here we demonstrate that for all these theories there exists, in fact, a weaker integrability condition which again defines submodels with infinitely many conservation laws. These conservation laws will be related to an Abelian subgroup of the group of area-preserving diffeomorphisms. As this weaker integrability condition is much easier to fulfill, it should be useful in the study of those nonlinear field theories.

Adam, C.; Sanchez-Guillen, J.; Wereszczynski, A. [Departamento de Fisica de Particulas, Facultad de Fisica, Universidad de Santiago, and Instituto Galego de Fisica de Altas Enerxias (IGFAE), E-15782 Santiago de Compostela (Spain); Institute of Physics, Jagiellonian University, Reymonta 4, 30-059 Cracow (Poland)

2006-02-15T23:59:59.000Z

435

Integrated Safety Management- Building Mission Success  

NLE Websites -- All DOE Office Websites (Extended Search)

ISM Integrated Safety Management- Building Mission Success Approximately 500 federal and contractor employees will arrive in Idaho Falls to participate in the 2008 Integrated...

436

Major Risk Factors Integrated Facility Disposition Project -...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

- Oak Ridge Summary - Major Risk Factors Integrated Facility Disposition Project (IFDP) Oak Ridge, TN More Documents & Publications Major Risk Factors to the Integrated...

437

Building Technologies Office: Integrated Predictive Demand Response  

NLE Websites -- All DOE Office Websites (Extended Search)

Integrated Predictive Integrated Predictive Demand Response Controller Research Project to someone by E-mail Share Building Technologies Office: Integrated Predictive Demand Response Controller Research Project on Facebook Tweet about Building Technologies Office: Integrated Predictive Demand Response Controller Research Project on Twitter Bookmark Building Technologies Office: Integrated Predictive Demand Response Controller Research Project on Google Bookmark Building Technologies Office: Integrated Predictive Demand Response Controller Research Project on Delicious Rank Building Technologies Office: Integrated Predictive Demand Response Controller Research Project on Digg Find More places to share Building Technologies Office: Integrated Predictive Demand Response Controller Research Project on AddThis.com...

438

Building Technologies Office: Integrated Building Management System  

NLE Websites -- All DOE Office Websites (Extended Search)

Integrated Building Integrated Building Management System Research Project to someone by E-mail Share Building Technologies Office: Integrated Building Management System Research Project on Facebook Tweet about Building Technologies Office: Integrated Building Management System Research Project on Twitter Bookmark Building Technologies Office: Integrated Building Management System Research Project on Google Bookmark Building Technologies Office: Integrated Building Management System Research Project on Delicious Rank Building Technologies Office: Integrated Building Management System Research Project on Digg Find More places to share Building Technologies Office: Integrated Building Management System Research Project on AddThis.com... About Take Action to Save Energy Partner with DOE

439

Power Integrations Inc | Open Energy Information  

Open Energy Info (EERE)

Name Power Integrations Inc Place San Jose, California Zip 95138 Product Supplier of high-voltage analog integrated circuits used in power conversion. References Power...

440

India's Integrated Energy Policy | Open Energy Information  

Open Energy Info (EERE)

India's Integrated Energy Policy Jump to: navigation, search Name India's Integrated Energy Policy AgencyCompany Organization Government of India Sector Energy Focus Area...

Note: This page contains sample records for the topic "integration activities related" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Audit of Departmental Integrated Standardized Core Accounting...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Audit of Departmental Integrated Standardized Core Accounting System (DISCAS) Operations at Selected Field Sites, AP-FS-97-02 Audit of Departmental Integrated Standardized Core...

442

IMPLEMENTATION OF INTEGRATED BUSINESS INFORMATION SYSTEMS WITHIN...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

IMPLEMENTATION OF INTEGRATED BUSINESS INFORMATION SYSTEMS WITHIN THE DEPARTMENT OF ENERGY, DOEIG-0466 IMPLEMENTATION OF INTEGRATED BUSINESS INFORMATION SYSTEMS WITHIN THE...

443

Integrated Computational Design, Development, Qualification and ...  

Science Conference Proceedings (OSTI)

Symposium, 1st World Congress on Integrated Computational Materials ... The benefits of applying an integrated approach to computational material design and ...

444

NIST Modeled integrated scattering tool (MIST)  

Science Conference Proceedings (OSTI)

... been developed to provide users with a general application to model an integrated scattering system. The program performs an integration of the ...

2012-08-07T23:59:59.000Z

445

Eon Masdar Integrated Carbon | Open Energy Information  

Open Energy Info (EERE)

Sign Up Search Page Edit with form History Facebook icon Twitter icon Eon Masdar Integrated Carbon Jump to: navigation, search Name Eon Masdar Integrated Carbon Place Germany...

446

Integrated Security System | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Integrated Security System Integrated Security System A security platform providing multi-layer intrusion detection and security management for a networked energy control systems...

447

Distributed Energy Systems Integration Group (Fact Sheet)  

Science Conference Proceedings (OSTI)

Factsheet developed to describe the activites of the Distributed Energy Systems Integration Group within NREL's Electricity, Resources, and Buildings Systems Integration center.

Not Available

2009-10-01T23:59:59.000Z

448

NREL: Process Development and Integration Laboratory - Video...  

NLE Websites -- All DOE Office Websites (Extended Search)

Video on How Process Development and Integration Works In this video, we provide a narrated animation that explains the process development and integration approach being used by...

449

NREL: Process Development and Integration Laboratory - Capabilities  

NLE Websites -- All DOE Office Websites (Extended Search)

Capabilities The process development and integration approach used within the Process Development and Integration Laboratory (PDIL) provides numerous capabilities for scientific...

450

NREL: Process Development and Integration Laboratory - Working...  

NLE Websites -- All DOE Office Websites (Extended Search)

Working with Us The Process Development and Integration Laboratory (PDIL), which accommodates the process development and integration approach, facilitates collaborative projects...

451

NREL: Process Development and Integration Laboratory - About...  

NLE Websites -- All DOE Office Websites (Extended Search)

About the Process Development and Integration Laboratory The Process Development and Integration Laboratory (PDIL) is located within the Science and Technology Facility at the...

452

The Integrated Environmental Control Model (IECM)  

NLE Websites -- All DOE Office Websites (Extended Search)

Innovations for Existing Plants The Integrated Environmental Control Model (IECM) The Integrated Environmental Control Model (IECM) was developed for the National Energy Technology...

453

Integrating transportation conservation with regional conservation planning  

E-Print Network (OSTI)

and Wildlife Biologist/Transportation Liaison, U.S. Fish andChapter Integrating Transportation and Resource Conservationon the integration of transportation conservation with the

DiGregoria, John; Luciani, Emilie; Wynn, Susan

2005-01-01T23:59:59.000Z

454

NREL: Electricity Integration Research - Electricity, Resources...  

NLE Websites -- All DOE Office Websites (Extended Search)

Electricity, Resources, and Building Systems Integration Center NREL's Electricity, Resources, and Building Systems Integration Center brings together diverse groups of experts...

455

Light Water Reactor Sustainability Program: Integrated Program...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Light Water Reactor Sustainability Program: Integrated Program Plan Light Water Reactor Sustainability Program: Integrated Program Plan Nuclear power has safely, reliably, and...

456

BTRIC | Building Tech Research Integration Center | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

& Integration Center SHARE The Buildings Technology Research & Integration Center (BTRIC) User Facility at Oak Ridge National Laboratory is the premier U.S. research facility...

457

EIS-0431: Hydrogen Energy California's Integrated Gasification...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

31: Hydrogen Energy California's Integrated Gasification Combined Cycle and Carbon Capture and Sequestration Project, California EIS-0431: Hydrogen Energy California's Integrated...

458

NREL: Distributed Grid Integration - Research Staff  

NLE Websites -- All DOE Office Websites (Extended Search)

interests include grid integration of renewables systems (wind and PV), energy storage system integration, distributed energy resources, distribution automation, power systems,...

459

Distributed Data Integration Infrastructure  

SciTech Connect

The Internet is becoming the preferred method for disseminating scientific data from a variety of disciplines. This can result in information overload on the part of the scientists, who are unable to query all of the relevant sources, even if they knew where to find them, what they contained, how to interact with them, and how to interpret the results. A related issue is keeping up with current trends in information technology often taxes the end-user's expertise and time. Thus instead of benefiting from this information rich environment, scientists become experts on a small number of sources and technologies, use them almost exclusively, and develop a resistance to innovations that can enhance their productivity. Enabling information based scientific advances, in domains such as functional genomics, requires fully utilizing all available information and the latest technologies. In order to address this problem we are developing a end-user centric, domain-sensitive workflow-based infrastructure, shown in Figure 1, that will allow scientists to design complex scientific workflows that reflect the data manipulation required to perform their research without an undue burden. We are taking a three-tiered approach to designing this infrastructure utilizing (1) abstract workflow definition, construction, and automatic deployment, (2) complex agent-based workflow execution and (3) automatic wrapper generation. In order to construct a workflow, the scientist defines an abstract workflow (AWF) in terminology (semantics and context) that is familiar to him/her. This AWF includes all of the data transformations, selections, and analyses required by the scientist, but does not necessarily specify particular data sources. This abstract workflow is then compiled into an executable workflow (EWF, in our case XPDL) that is then evaluated and executed by the workflow engine. This EWF contains references to specific data source and interfaces capable of performing the desired actions. In order to provide access to the largest number of resources possible, our lowest level utilizes automatic wrapper generation techniques to create information and data wrappers capable of interacting with the complex interfaces typical in scientific analysis. The remainder of this document outlines our work in these three areas, the impact our work has made, and our plans for the future.

Critchlow, T; Ludaescher, B; Vouk, M; Pu, C

2003-02-24T23:59:59.000Z

460

INCCA: Integrated Climate and Carbon  

SciTech Connect

The INCCA (Integrated Climate and Carbon) initiative will develop and apply the ability to simulate the fate and climate impact of fossil fuel-derived carbon dioxide (CO{sub 2}) and aerosols on a global scale. Coupled climate and carbon cycle modeling like that proposed for INCCA is required to understand and predict the future environmental impacts of fossil fuel burning. At present, atmospheric CO{sub 2} concentrations are prescribed, not simulated, in large climate models. Credible simulations of the entire climate system, however, need to predict time-evolving atmospheric greenhouse forcing using anthropogenic emissions as the fundamental input. Predicting atmospheric COS concentrations represents a substantial scientific advance because there are large natural sources and sinks of carbon that are likely to change as a result of climate change. Both terrestrial (e.g., vegetation on land) and oceanic components of the carbon cycle are known to be sensitive to climate change. Estimates of the amount of man-made CO{sub 2} that will accumulate in the atmosphere depend on understanding the carbon cycle. For this reason, models that use CO{sub 2} emissions, not prescribed atmospheric concentrations, as fundamental inputs are required to directly address greenhouse-related questions of interest to policymakers. INCCA is uniquely positioned to make rapid progress in this high-priority area of global change modeling and prediction because we can leverage previous and ongoing LLNL developments, and use existing component models that are well-developed and published. The need for a vastly improved carbon dioxide prediction capability is appreciated by the DOE. As the US Accelerated Climate Prediction Initiative (ACPI) progresses, we expect the DOE will emphasize the carbon cycle as the next major department-level earth science focus. INCCA will position LLNL for substantial additional funding as this new focus is realized. In the limited time since our LDRD funding was first received (1 November 2000) we have made good progress in acquisition and testing of component models, applications of the terrestrial biosphere model, enhancements to the ocean carbon cycle model and development of the fossil fuel aerosol model.

Thompson, S L

2001-03-13T23:59:59.000Z

Note: This page contains sample records for the topic "integration activities related" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

An integrated approach for head gesture based interface  

Science Conference Proceedings (OSTI)

The head pose and movement of a user is closely related with his/her intention and thought, recognition of such information could be useful to develop a natural and sensitive user-wheelchair interface. This paper presents an original integrated approach ... Keywords: Electric powered wheelchair, Face authentication, Facial pose estimation, Head gesture based interface, State machine

Gin Chong Lee; Chu Kiong Loo; Letchumanan Chockalingam

2012-03-01T23:59:59.000Z

462

Separations and safeguards model integration.  

Science Conference Proceedings (OSTI)

Research and development of advanced reprocessing plant designs can greatly benefit from the development of a reprocessing plant model capable of transient solvent extraction chemistry. This type of model can be used to optimize the operations of a plant as well as the designs for safeguards, security, and safety. Previous work has integrated a transient solvent extraction simulation module, based on the Solvent Extraction Process Having Interaction Solutes (SEPHIS) code developed at Oak Ridge National Laboratory, with the Separations and Safeguards Performance Model (SSPM) developed at Sandia National Laboratory, as a first step toward creating a more versatile design and evaluation tool. The goal of this work was to strengthen the integration by linking more variables between the two codes. The results from this integrated model show expected operational performance through plant transients. Additionally, ORIGEN source term files were integrated into the SSPM to provide concentrations, radioactivity, neutron emission rate, and thermal power data for various spent fuels. This data was used to generate measurement blocks that can determine the radioactivity, neutron emission rate, or thermal power of any stream or vessel in the plant model. This work examined how the code could be expanded to integrate other separation steps and benchmark the results to other data. Recommendations for future work will be presented.

Cipiti, Benjamin B.; Zinaman, Owen

2010-09-01T23:59:59.000Z

463

MHD Integrated Topping Cycle Project  

DOE Green Energy (OSTI)

The Magnetohydrodynamics (MHD) Integrated Topping Cycle (ITC) Project represents the culmination of the proof-of-concept (POC) development stage in the US Department of Energy (DOE) program to advance MHD technology to early commercial development stage utility power applications. The project is a joint effort, combining the skills of three topping cycle component developers: TRW, Avco/TDS, and Westinghouse. TRW, the prime contractor and system integrator, is responsible for the 50 thermal megawatt (50 MW{sub t}) slagging coal combustion subsystem. Avco/TDS is responsible for the MHD channel subsystem (nozzle, channel, diffuser, and power conditioning circuits), and Westinghouse is responsible for the current consolidation subsystem. The ITC Project will advance the state-of-the-art in MHD power systems with the design, construction, and integrated testing of 50 MW{sub t} power train components which are prototypical of the equipment that will be used in an early commercial scale MHD utility retrofit. Long duration testing of the integrated power train at the Component Development and Integration Facility (CDIF) in Butte, Montana will be performed, so that by the early 1990's, an engineering data base on the reliability, availability, maintainability and performance of the system will be available to allow scaleup of the prototypical designs to the next development level. This Sixteenth Quarterly Technical Progress Report covers the period May 1, 1991 to July 31, 1991.

Not Available

1992-03-01T23:59:59.000Z

464

Integrated PEV Charging Solutions and Reduced Energy for Occupant Comfort (Brochure)  

DOE Green Energy (OSTI)

Brochure on Vehicle Testing and Integration Facility, featuring the Vehicle Modification Facility, Vehicle Test Pad and ReCharge Integrated Demonstration System. Plug-in electric vehicles (PEVs) offer the opportunity to shift transportation energy demands from petroleum to electricity, but broad adoption will require integration with other systems. While automotive experts work to reduce the cost of PEVs, fossil fueled cars and trucks continue to burn hundreds of billions of gallons of petroleum each year - not only to get from point A to point B, but also to keep passengers comfortable with air conditioning and heat. At the National Renewable Energy Laboratory (NREL), three installations form a research laboratory known as the Vehicle Testing and Integration Facility (VTIF). At the VTIF, engineers are developing strategies to address two separate but equally crucial areas of research: meeting the demands of electric vehicle-grid integration and minimizing fuel consumption related to vehicle climate control. Part of NREL's Center for Transportation Technologies and Systems (CTTS), the VTIF is dedicated to renewable and energy efficient solutions. This facility showcases technology and systems designed to increase the viability of sustainably powered vehicles. NREL researchers instrument every class of on-road vehicle, conduct hardware and software validation for electric vehicle (EV) components and accessories, and develop analysis tools and technology for the Department of Energy, other government agencies and industry partners. Research conducted at the VTIF examines the interaction of building energy systems, utility grids, renewable energy sources and PEVs, integrating energy management solutions, and maximizing potential greenhouse gas (GHG) reduction, while smoothing the transition and reducing costs for EV owners. NREL's collaboration with automakers, charging station manufacturers, utilities and fleet operators to assess technologies using VTIF resources is designed to enable PEV communication with the smart grid and create opportunities for vehicles to play an active role in building and grid management. Ultimately, this creates value for the vehicle owner and will help renewables be deployed faster and more economically, making the U.S. transportation sector more flexible and sustainable.

Not Available

2012-01-01T23:59:59.000Z

465

ARM - Related Data Sets  

NLE Websites -- All DOE Office Websites (Extended Search)

govDataRelated Data Sets Related Data Sets Numerous ARM collaborators compile and share similar types of data from their own research efforts. The links below provide a lengthy...

466

NREL: Electricity Integration Research - Webmaster  

NLE Websites -- All DOE Office Websites (Extended Search)

Webmaster Webmaster Please enter your name and email address in the boxes provided, then type your message below. When you are finished, click "Send Message." NOTE: If you enter your e-mail address incorrectly, we will be unable to reply. Your name: Your email address: Your message: Send Message Printable Version Electricity Integration Research Home Distributed Grid Integration Transmission Grid Integration Facilities Working with Us Did you find what you needed? Yes 1 No 0 Thank you for your feedback. Would you like to take a moment to tell us how we can improve this page? Submit We value your feedback. Thanks! We've received your feedback. Something went wrong. Please try again later. NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.

467

Integrated Building Management System (IBMS)  

SciTech Connect

This project provides a combination of software and services that more easily and cost-effectively help to achieve optimized building performance and energy efficiency. Featuring an open-platform, cloud- hosted application suite and an intuitive user experience, this solution simplifies a traditionally very complex process by collecting data from disparate building systems and creating a single, integrated view of building and system performance. The Fault Detection and Diagnostics algorithms developed within the IBMS have been designed and tested as an integrated component of the control algorithms running the equipment being monitored. The algorithms identify the normal control behaviors of the equipment without interfering with the equipment control sequences. The algorithms also work without interfering with any cooperative control sequences operating between different pieces of equipment or building systems. In this manner the FDD algorithms create an integrated building management system.

Anita Lewis

2012-07-01T23:59:59.000Z

468

Genetic learning of fuzzy integrals accumulating human-reported environmental stress  

Science Conference Proceedings (OSTI)

In this paper, we develop models based on fuzzy integrals (both of the Choquet and Sugeno type) for accumulating annoyance by noise, odor or light caused by particular sources or activities. As underlying fuzzy measures, we have opted for k-maxitive ... Keywords: Annoyance models, Fuzzy integrals, Genetic optimization, Maxitive fuzzy measure

A. Verkeyn; D. Botteldooren; B. De Baets

2011-01-01T23:59:59.000Z

469

A risk mitigation framework for integrated-enterprise systems implementation for the manufacturing environment  

Science Conference Proceedings (OSTI)

Companies today are faced with the constant challenge to reinvent and reengineer themselves and to actively collaborate with business partners and customers in order to stay competitive and survive in the market. This has mandated the need for companies ... Keywords: enterprise integration, information systems frameworks, integrated enterprise systems, manufacturing industry, risk mitigation

Lip Tse Ho; Grier Lin; Sev Nagalingam

2009-03-01T23:59:59.000Z

470

Interaction of EMS related systems by using the CIM standard  

E-Print Network (OSTI)

Interaction of EMS related systems by using the CIM standard Mathias Uslar, Tanja Schmedes1 OFFIS Model (CIM) establishes a common language and domain model for energy management systems and related to connect the systems to a an integration platform using the CIM as a common language. This paper

Appelrath, Hans-J眉rgen

471

Quantum groups and functional relations for higher rank  

E-Print Network (OSTI)

A detailed construction of the universal integrability objects related to the integrable systems associated with the quantum group $\\mathrm U_q(\\mathcal L(\\mathfrak{sl}_3))$ is given. The full proof of the functional relations in the form independent of the representation of the quantum group in the quantum space is presented. The case of the general gradation and general twisting is treated. The specialization of the universal functional relations to the case