National Library of Energy BETA

Sample records for integrating time-lapse cxs

  1. INTEGRATION OF ROCK PHYSICS AND RESERVOIR SIMULATION FOR THE INTERPRETATION OF TIME-LAPSE

    E-Print Network [OSTI]

    INTEGRATION OF ROCK PHYSICS AND RESERVOIR SIMULATION FOR THE INTERPRETATION OF TIME-LAPSE SEISMIC is 15% to 20%, and should be detected in the time-lapse seismic data. Through interpretation of P This thesis research integrates reservoir simulation with time-lapse (4D) seismic monitoring of reservoir

  2. Monitoring CO2 Storage at Cranfield, Mississippi with Time-Lapse Offset VSP – Using Integration and Modeling to Reduce Uncertainty

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Daley, Thomas M.; Hendrickson, Joel; Queen, John H.

    2014-12-31

    A time-lapse Offset Vertical Seismic Profile (OVSP) data set was acquired as part of a subsurface monitoring program for geologic sequestration of CO2. The storage site at Cranfield, near Natchez, Mississippi, is part of a detailed area study (DAS) site for geologic carbon sequestration operated by the U.S. Dept. of Energy’s Southeast Regional Carbon Sequestration Partnership (SECARB). The DAS site includes three boreholes, an injection well and two monitoring wells. The project team selected the DAS site to examine CO2 sequestration multiphase fluid flow and pressure at the interwell scale in a brine reservoir. The time-lapse (TL) OVSP was partmore »of an integrated monitoring program that included well logs, crosswell seismic, electrical resistance tomography and 4D surface seismic. The goals of the OVSP were to detect the CO2 induced change in seismic response, give information about the spatial distribution of CO2 near the injection well and to help tie the high-resolution borehole monitoring to the 4D surface data. The VSP data were acquired in well CFU 31-F1, which is the ~3200 m deep CO2 injection well at the DAS site. A preinjection survey was recorded in late 2009 with injection beginning in December 2009, and a post injection survey was conducted in Nov 2010 following injection of about 250 kT of CO2. The sensor array for both surveys was a 50-level, 3-component, Sercel MaxiWave system with 15 m (49 ft) spacing between levels. The source for both surveys was an accelerated weight drop, with different source trucks used for the two surveys. Consistent time-lapse processing was applied to both data sets. Time-lapse processing generated difference corridor stacks to investigate CO2 induced reflection amplitude changes from each source point. Corridor stacks were used for amplitude analysis to maximize the signal-to-noise ratio (S/N) for each shot point. Spatial variation in reflectivity (used to ‘map’ the plume) was similar in magnitude to the corridor stacks but, due to relatively lower S/N, the results were less consistent and more sensitive to processing and therefore are not presented. We examined the overall time-lapse repeatability of the OVSP data using three methods, the NRMS and Predictability (Pred) measures of Kragh and Christie (2002) and the signal-to-distortion ratio (SDR) method of Cantillo (2011). Because time-lapse noise was comparable to the observed change, multiple methods were used to analyze data reliability. The reflections from the top and base reservoir were identified on the corridor stacks by correlation with a synthetic response generated from the well logs. A consistent change in the corridor stack amplitudes from pre- to post-CO2 injection was found for both the top and base reservoir reflections on all ten shot locations analyzed. In addition to the well-log synthetic response, a finite-difference elastic wave propagation model was built based on rock/fluid properties obtained from well logs, with CO2 induced changes guided by time-lapse crosswell seismic tomography (Ajo-Franklin, et al., 2013) acquired at the DAS site. Time-lapse seismic tomography indicated that two reservoir zones were affected by the flood. The modeling established that interpretation of the VSP trough and peak event amplitudes as reflectivity from the top and bottom of reservoir is appropriate even with possible tuning effects. Importantly, this top/base change gives confidence in an interpretation that these changes arise from within the reservoir, not from bounding lithology. The modeled time-lapse change and the observed field data change from 10 shotpoints are in agreement for both magnitude and polarity of amplitude change for top and base of reservoir. Therefore, we conclude the stored CO2 has been successfully detected and, furthermore, the observed seismic reflection change can be applied to Cranfield’s 4D surface seismic for spatially delineating the CO2/brine interface.« less

  3. Monitoring CO2 Storage at Cranfield, Mississippi with Time-Lapse Offset VSP – Using Integration and Modeling to Reduce Uncertainty

    SciTech Connect (OSTI)

    Daley, Thomas M. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Hendrickson, Joel [Steelhead Geophysical LLC, New Orleans, LA (United States); Queen, John H. [Hi-Q Geophysical Inc., Ponca City, OK (United States)

    2014-12-31

    A time-lapse Offset Vertical Seismic Profile (OVSP) data set was acquired as part of a subsurface monitoring program for geologic sequestration of CO2. The storage site at Cranfield, near Natchez, Mississippi, is part of a detailed area study (DAS) site for geologic carbon sequestration operated by the U.S. Dept. of Energy’s Southeast Regional Carbon Sequestration Partnership (SECARB). The DAS site includes three boreholes, an injection well and two monitoring wells. The project team selected the DAS site to examine CO2 sequestration multiphase fluid flow and pressure at the interwell scale in a brine reservoir. The time-lapse (TL) OVSP was part of an integrated monitoring program that included well logs, crosswell seismic, electrical resistance tomography and 4D surface seismic. The goals of the OVSP were to detect the CO2 induced change in seismic response, give information about the spatial distribution of CO2 near the injection well and to help tie the high-resolution borehole monitoring to the 4D surface data. The VSP data were acquired in well CFU 31-F1, which is the ~3200 m deep CO2 injection well at the DAS site. A preinjection survey was recorded in late 2009 with injection beginning in December 2009, and a post injection survey was conducted in Nov 2010 following injection of about 250 kT of CO2. The sensor array for both surveys was a 50-level, 3-component, Sercel MaxiWave system with 15 m (49 ft) spacing between levels. The source for both surveys was an accelerated weight drop, with different source trucks used for the two surveys. Consistent time-lapse processing was applied to both data sets. Time-lapse processing generated difference corridor stacks to investigate CO2 induced reflection amplitude changes from each source point. Corridor stacks were used for amplitude analysis to maximize the signal-to-noise ratio (S/N) for each shot point. Spatial variation in reflectivity (used to ‘map’ the plume) was similar in magnitude to the corridor stacks but, due to relatively lower S/N, the results were less consistent and more sensitive to processing and therefore are not presented. We examined the overall time-lapse repeatability of the OVSP data using three methods, the NRMS and Predictability (Pred) measures of Kragh and Christie (2002) and the signal-to-distortion ratio (SDR) method of Cantillo (2011). Because time-lapse noise was comparable to the observed change, multiple methods were used to analyze data reliability. The reflections from the top and base reservoir were identified on the corridor stacks by correlation with a synthetic response generated from the well logs. A consistent change in the corridor stack amplitudes from pre- to post-CO2 injection was found for both the top and base reservoir reflections on all ten shot locations analyzed. In addition to the well-log synthetic response, a finite-difference elastic wave propagation model was built based on rock/fluid properties obtained from well logs, with CO2 induced changes guided by time-lapse crosswell seismic tomography (Ajo-Franklin, et al., 2013) acquired at the DAS site. Time-lapse seismic tomography indicated that two reservoir zones were affected by the flood. The modeling established that interpretation of the VSP trough and peak event amplitudes as reflectivity from the top and bottom of reservoir is appropriate even with possible tuning effects. Importantly, this top/base change gives confidence in an interpretation that these changes arise from within the reservoir, not from bounding lithology. The modeled time-lapse change and the observed field data change from 10 shotpoints are in agreement for both magnitude and polarity of amplitude change for top and base of reservoir. Therefore, we conclude the stored CO2 has been successfully detected and, furthermore, the observed seismic reflection change can

  4. Stochastic and Deterministic Inversion Methods for History Matching of Production and Time-Lapse Seismic Data 

    E-Print Network [OSTI]

    Watanabe, Shingo

    2013-08-26

    -based inversion methods as a deterministic approach for integrating both production and time-lapse seismic data into high resolution reservoir models. For the ensemble Kalman filter, we develope a physically motivated phase streamline-based covariance...

  5. Time-lapse seismic modeling and production data assimilation for enhanced oil recovery and CO2 sequestration 

    E-Print Network [OSTI]

    Kumar, Ajitabh

    2009-05-15

    using reservoir models and inverse modeling for updating reservoir models using the data collected from field. The viability of time-lapse seismic monitoring using an integrated modeling of fluid flow, including chemical reactions, and seismic response...

  6. Time-lapse Joint Inversion of Geophysical Data and its Applications...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Time-lapse Joint Inversion of Geophysical Data and its Applications to Geothermal Prospecting Time-lapse Joint Inversion of Geophysical Data and its Applications to Geothermal...

  7. SPECTRAL DECOMPOSITION APPLIED TO TIME-LAPSE SEISMIC INTERPRETATION AT RULISON FIELD,

    E-Print Network [OSTI]

    SPECTRAL DECOMPOSITION APPLIED TO TIME-LAPSE SEISMIC INTERPRETATION AT RULISON FIELD, GARFIELD focuses on the application of this technique to time-lapse seismic interpretation using nine-component 4D-lapse interpretation through a cross equalization process. I analyzed two time-lapse pairs of seismic surveys: 2003

  8. Why perform time-lapse seismic monitoring? Is it to ver-ify the reservoir model? No! We should conduct time-lapse

    E-Print Network [OSTI]

    - ued "brightening" of this class III AVO reservoir with pro- duction as the gas saturation continuouslyWhy perform time-lapse seismic monitoring? Is it to ver- ify the reservoir model? No! We should conduct time-lapse seismic surveys in order to find out what is incorrect in the reservoir model, in a way

  9. Entropy-Bayesian Inversion of Time-Lapse Tomographic GPR data...

    Office of Scientific and Technical Information (OSTI)

    Technical Report: Entropy-Bayesian Inversion of Time-Lapse Tomographic GPR data for Monitoring Dielectric Permittivity and Soil Moisture Variations Citation Details In-Document...

  10. Time-lapse gravity monitoring of an aquifer storage recovery project in Leyden, Colorado Kristofer Davis*

    E-Print Network [OSTI]

    Time-lapse gravity monitoring of an aquifer storage recovery project in Leyden, Colorado Kristofer on using time-lapse micro-gravity surveying to monitor an aquifer storage recovery project. An abandoned coal mine is being developed into an underground water reservoir in Leyden, Colorado. Excess water from

  11. SHEAR WAVE TIME-LAPSE SEISMIC MONITORING OF A TIGHT GAS SANDSTONE RESERVOIR, RULISON FIELD, COLORADO

    E-Print Network [OSTI]

    SHEAR WAVE TIME-LAPSE SEISMIC MONITORING OF A TIGHT GAS SANDSTONE RESERVOIR, RULISON FIELD focused specifically on the use of time-lapse (4D) poststack migrated shear-wave seismic data of shear wave data as a tool for monitoring 4D changes. The basin centered tight gas sandstone reservoir

  12. Numerical modeling of fluid flow and time-lapse seismograms applied to

    E-Print Network [OSTI]

    Santos, Juan

    ; and CO2 and CO2 are the CO2 mole fraction and the CO2 mass fraction in the brine phase. This conversionNumerical modeling of fluid flow and time-lapse seismograms applied to CO2 storage and monitoring G and time-lapse seismograms applied to CO2 storage and monitoring ­ p. #12;Introduction · Fossil

  13. Time-lapse monitoring of rock properties with coda wave interferometry

    E-Print Network [OSTI]

    Snieder, Roel

    exploited ultrasonic coda waves to monitor time-varying rock properties in a laboratory environment. We haveTime-lapse monitoring of rock properties with coda wave interferometry Alexandre Gre^t,1 Roel dam and volcano monitoring, time-lapse reservoir characterization, earthquake relocation, and stress

  14. Time-lapse electrical resistivity tomography applied to cave sustainability (Barbados) and groundwater exploration (Saint Lucia)

    E-Print Network [OSTI]

    Agramakova, Yulia

    2011-01-01

    In this work we apply the method of two-dimensional time-lapse electrical resistivity tomography (2D time-lapse ERT) for two different problems. In the first problem, we monitor the structural stability of the roof of the ...

  15. TIME-LAPSE VP/VS ANALYSIS FOR RESERVOIR CHARACTERIZATION, RULISON FIELD, COLORADO

    E-Print Network [OSTI]

    from post-stack inversion of P- and S- wave datasets from three (3) time-lapse dedicated 9C surveys-component seismic is used to help with reservoir characterization of tight gas sands via time-lapse VP/VS volumes11 and slow-shear S22) I performed post-stack inversion of the corresponding datasets to obtain

  16. Numerical modeling of fluid flow and time-lapse seismics to monitor CO2

    E-Print Network [OSTI]

    Santos, Juan

    Numerical modeling of fluid flow and time-lapse seismics to monitor CO2 Sequestration in aquifers J, ITALY). IMAL, 30/5/2014 Numerical modeling of fluid flow and time-lapse seismics to monitor CO2 Sequestration in aquifers ­ p. #12;Introduction. I Storage of CO2 in geological formations is a procedure

  17. Full wavefield inversion methods for monitoring time-lapse subsurface velocity changes

    E-Print Network [OSTI]

    Yang, Di, Ph. D. Massachusetts Institute of Technology

    2014-01-01

    Quantitative measurements of seismic velocity changes from time-lapse seismic experiments provide dynamic information about the subsurface that improves the understanding of the geology and reservoir properties. In this ...

  18. Using image warping for time-lapse image domain wavefield tomography

    E-Print Network [OSTI]

    Yang, Di

    Time-lapse seismic data are widely used for monitoring subsurface changes. A quantitative assessment of how reservoir properties have changed allows for better interpretation of fluid substitution and fluid migration during ...

  19. Coupling: Impact and Implications for High-Resolution Time-Lapse Seismic Surveying

    E-Print Network [OSTI]

    Walters, Shelby Lynn

    2008-07-28

    the first downhole shot, indicating an improved ground to surface seal. Reflection amplitudes decrease significantly after the first downhole shot, indicating a decrease in source coupling of body wave energy. Reflection amplitude remained approximately... be used to successfully monitor enhanced oil recovery processes, and by the mid-1990s time-lapse seismic surveying evolved into a promising technology for oil production management (He et al., 1996; Janson, 2001). Though time-lapse seismic techniques...

  20. Time-lapse travel time change of multiply scattered acoustic waves

    E-Print Network [OSTI]

    Snieder, Roel

    .g., wave energy is transported in a process similar to heat diffusion. In medical imaging, for example of applications where detecting temporal changes may be useful include the monitoring of volcanoes, oil reservoirs time-lapse changes in the oil reservoir caused by a massive miscible CO2 flood to enhance oil recovery

  1. P-WAVE TIME-LAPSE SEISMIC DATA INTERPRETATION AT RULISON FIELD, PICEANCE BASIN, COLORADO

    E-Print Network [OSTI]

    P-WAVE TIME-LAPSE SEISMIC DATA INTERPRETATION AT RULISON FIELD, PICEANCE BASIN, COLORADO by Donald-lapse seismic surveys, shot by the Reservoir Characterization Project in the fall of 2003 and 2004, at Rulison seismic can monitor tight gas reservoirs, to a limited extent, over a short period of time. Repeat surveys

  2. DYNAMIC RESERVOIR CHARACTERIZATION USING P-WAVE SEISMIC TIME-LAPSE AT POSTLE FIELD,

    E-Print Network [OSTI]

    DYNAMIC RESERVOIR CHARACTERIZATION USING P-WAVE SEISMIC TIME-LAPSE AT POSTLE FIELD, TEXAS COUNTY characterize the reservoir at Postle Field. RCP shot a 6.25 square miles 4D, 9C seismic survey in March 2008.3 to 0.15. Quadrature attribute and seismic inversion-of-difference provide qualitative and quantitative

  3. Constraining the density of CO2 within the Utsira formation using time-lapse gravity measurements

    E-Print Network [OSTI]

    Nooner, Scott

    best fit a high temperature forward model based on the seismically determined CO2 geometry, suggesting to study the behavior and physical properties of the injected CO2. The gravity measurements show1 Constraining the density of CO2 within the Utsira formation using time-lapse gravity measurements

  4. Fast history matching of time-lapse seismic and production data for high resolution models 

    E-Print Network [OSTI]

    Jimenez, Eduardo Antonio

    2008-10-10

    monitoring fluid movements throughout the reservoir. 4D seismic advances are also being driven by an increased need by the petroleum engineering community to become more quantitative and accurate in our ability to monitor reservoir processes. Qualitative... interpretations of time-lapse anomalies are being replaced by quantitative inversions of 4D seismic data to produce accurate maps of fluid saturations, pore pressure, temperature, among others. Within all steps involved in this subsurface modeling process...

  5. TIME-LAPSE SEISMIC MODELING & INVERSION OF CO2 SATURATION FOR SEQUESTRATION AND ENHANCED OIL RECOVERY

    SciTech Connect (OSTI)

    Mark A. Meadows

    2006-03-31

    Injection of carbon dioxide (CO2) into subsurface aquifers for geologic storage/sequestration, and into subsurface hydrocarbon reservoirs for enhanced oil recovery, has become an important topic to the nation because of growing concerns related to global warming and energy security. In this project we developed new ways to predict and quantify the effects of CO2 on seismic data recorded over porous reservoir/aquifer rock systems. This effort involved the research and development of new technology to: (1) Quantitatively model the rock physics effects of CO2 injection in porous saline and oil/brine reservoirs (both miscible and immiscible). (2) Quantitatively model the seismic response to CO2 injection (both miscible and immiscible) from well logs (1D). (3) Perform quantitative inversions of time-lapse 4D seismic data to estimate injected CO2 distributions within subsurface reservoirs and aquifers. This work has resulted in an improved ability to remotely monitor the injected CO2 for safe storage and enhanced hydrocarbon recovery, predict the effects of CO2 on time-lapse seismic data, and estimate injected CO2 saturation distributions in subsurface aquifers/reservoirs. We applied our inversion methodology to a 3D time-lapse seismic dataset from the Sleipner CO2 sequestration project, Norwegian North Sea. We measured changes in the seismic amplitude and traveltime at the top of the Sleipner sandstone reservoir and used these time-lapse seismic attributes in the inversion. Maps of CO2 thickness and its standard deviation were generated for the topmost layer. From this information, we estimated that 7.4% of the total CO2 injected over a five-year period had reached the top of the reservoir. This inversion approach could also be applied to the remaining levels within the anomalous zone to obtain an estimate of the total CO2 injected.

  6. Temporal changes in gas hydrate mound topography and ecology: deep-sea time-lapse camera observations 

    E-Print Network [OSTI]

    Vardaro, Michael Fredric

    2004-09-30

    A deep-sea time-lapse camera and several temperature probes were deployed on the Gulf of Mexico continental shelf at a biological community associated with a gas hydrate outcropping to study topographic and hydrologic changes over time...

  7. Data-driven estimation of the sensitivity of target-oriented time-lapse seismic imaging to source geometry

    E-Print Network [OSTI]

    Fehler, Michael

    The goal of time-lapse imaging is to identify and characterize regions in which the earth’s material properties have changed between surveys. This requires an effective deployment of sources and receivers to monitor the ...

  8. Time-lapse VSP data processing for monitoring CO2 injection

    SciTech Connect (OSTI)

    Huang, Lianjie; Rutledge, James; Cheng, Arthur

    2009-01-01

    As a part of the effort of the Southwest Regional Partnership on Carbon Sequestration supported by U.S. Department of Energy and managed by the National Energy Technology Laboratory, two sets of time-lapse VSPs were acquired and processed in oil fields undergoing CO{sub 2} injection. One set of VSPs was acquired at the Aneth oil field in Utah, the other set at the Scurry Area Canyon Reef Operators Committee (SACROC) field in West Texas. One baseline and two repeat VSP surveys were conducted from 2007 to 2009 at the Aneth oil field in Utah for monitoring CO{sub 2} injection. The aim of the time-lapse VSP surveys is to study the combined enhanced oil recovery (EOR) and CO{sub 2} sequestration in collaboration with Resolute Natural Resources, Inc. VSP data were acquired using a cemented geophone string with 60 levels at depth from 805 m to 1704 m, and CO{sub 2} is injected into a horizontal well nearby within the reservoir at depth approximately from 1730 m to 1780 m. For each VSP survey, the data were acquired for one zero-offset source location and seven offset source locations (Figure 1). The baseline VSP survey was conducted before the CO{sub 2} injection. More than ten thousand tons of CO{sub 2} was injected between each of the two repeat VSP surveys. There are three horizontal injection wells, all originating from the same vertical well. One is drilled towards Southeast, directly towards the monitoring well (Figure 2), and the other two towards Northwest, directly away from the monitoring well. The injection is into the top portion of the Desert Creek formation, just beneath the Gothic shale, which acts as the reservoir seal. The initial baseline acquisition was done in October 2007; subsequent time-lapse acquisitions were conducted in July 2008, and January 2009. The acquisition geometry is shown in Figure 1. Shot point 1 is the zero-offset source location, Shot points 2 to 8 are the seven offset VSPs, arranged in a quarter circle on the Northwest side of the monitoring well. The horizontal injection well is shown in green. The black lines in Figure 1 show the approximate reflection coverage al reservoir depth from the respective offset source locations. VSP source location 5 is in a direct line with the injection. The 60 geophone sondes were cemented into the monitor well just before the baseline VSP acquisition and consisted of 96 geophone channels, with 18 three-component geophones (at the bottom of the string) and 42 single vertical component phones above. For this study, only the vertical geophone data were used.

  9. Numerical modeling of time-lapse seismic data from fractured reservoirs including fluid flow and geochemical processes 

    E-Print Network [OSTI]

    Shekhar, Ravi

    2009-05-15

    and amplitude variation with offset (AVO) results for our example model predicts that CO2 is easier to detect than brine in the fractured reservoirs. The effects of geochemical processes on seismics are simulated by time-lapse modeling for t = 1000 years. My...

  10. Using time-lapse seismics as a reservoir-monitoring tool, geophysics can help distinguish different reservoir pro-

    E-Print Network [OSTI]

    reservoir pro- duction scenarios. For example, Eiken et al. (2000) success- fully detected fluid-saturation life, oil saturation usually decreases, reservoir pressure declines, and gas breakout may occurUsing time-lapse seismics as a reservoir-monitoring tool, geophysics can help distinguish different

  11. Pre-Stack Depth Migration and Attribute Analysis of 3-D Time-Lapse P-wave Data

    E-Print Network [OSTI]

    Pre-Stack Depth Migration and Attribute Analysis of 3-D Time-Lapse P-wave Data Vacuum Field, New the application of Pre-Stack Depth Migration (PSDM) and innovative window-based attribute analysis applied to 4-D seismic data. The data were acquired in Central Vacuum Unit, Lea County, New Mexico by the Reservoir

  12. Cellular Tracking in Time-lapse Phase Contrast Images K. Thirusittampalam, M.J. Hossain, O. Ghita, and P.F. Whelan

    E-Print Network [OSTI]

    Whelan, Paul F.

    Cellular Tracking in Time-lapse Phase Contrast Images K. Thirusittampalam, M.J. Hossain, O. Ghita {kethesan, julius, ghitao, whelanp}@eeng.dcu.ie Abstract The quantitative analysis of live cellular structures in time-lapse image sequences is a key issue in evaluating biological processes such as cellular

  13. ENVIRONMENTAL MONITORING OF LEAKS USING TIME LAPSED LONG ELECTRODE ELECTRICAL RESISTIVITY

    SciTech Connect (OSTI)

    RUCKER DF; FINK JB; LOKE MH; MYERS DA

    2009-11-05

    Highly industrialized areas pose significant challenges for surface based electrical resistivity characterization and monitoring due to the high degree of metallic infrastructure. The infrastructure is typically several orders of magnitude more conductive than the desired targets, preventing the geophysicist from obtaining a clear picture of the subsurface. These challenges may be minimized if steel-cased wells are used as long electrodes. We demonstrate a method of using long electrodes in a complex nuclear waste facility to monitor a simulated leak from an underground storage tank. The leak was simulated by injecting high conductivity fluid in a perforated well and the resistivity measurements were made before and after the leak test. The data were processed in four dimensions, where a regularization procedure was applied in both the time and space domains. The results showed a lowered resistivity feature develop south of the injection site. The time lapsed regularization parameter had a strong influence on the differences in inverted resistivity between the pre and post datasets, potentially making calibration of the results to specific hydrogeologic parameters difficult.

  14. Fracture Quality From Integrating Time-Lapse VSP and Microseismic Data

    E-Print Network [OSTI]

    House, Nancy J.

    2007-01-01

    Tight gas reservoirs are problematic to produce, often requiring multiple stages of hydraulic fracturing in order to create connected pathways through which hydrocarbons may flow. In this paper, we propose a new methodology ...

  15. OMEGA EP Laser Integration Time Lapse Movie Gallery - Laboratory for Laser

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefieldSulfateSciTechtail.Theory ofDid you notHeatMaRIEdioxideUser Work FeaturedNuclearNP-ControlEnergetics

  16. Application of Time-Lapse Seismic Monitoring for the Control and Optimization of CO2 Enhanced Oil Recovery Operations

    SciTech Connect (OSTI)

    Brian Toelle

    2008-11-30

    This project, 'Application of Time-Lapse Seismic Monitoring for the Control and Optimization of CO{sub 2} Enhanced Oil Recovery Operations', investigated the potential for monitoring CO{sub 2} floods in carbonate reservoirs through the use of standard p-wave seismic data. This primarily involved the use of 4D seismic (time lapse seismic) in an attempt to observe and map the movement of the injected CO{sub 2} through a carbonate reservoir. The differences between certain seismic attributes, such as amplitude, were used for this purpose. This technique has recently been shown to be effective in CO{sub 2} monitoring in Enhanced Oil Recovery (EOR) projects, such as Weyborne. This study was conducted in the Charlton 30/31 field in the northern Michigan Basin, which is a Silurian pinnacle reef that completed its primary production in 1997 and was scheduled for enhanced oil recovery using injected CO{sub 2}. Prior to injection an initial 'Base' 3D survey was obtained over the field and was then processed and interpreted. CO{sub 2} injection within the main portion of the reef was conducted intermittently during 13 months starting in August 2005. During this time, 29,000 tons of CO{sub 2} was injected into the Guelph formation, historically known as the Niagaran Brown formation. By September 2006, the reservoir pressure within the reef had risen to approximately 2000 lbs and oil and water production from the one producing well within the field had increased significantly. The determination of the reservoir's porosity distribution, a critical aspect of reservoir characterization and simulation, proved to be a significant portion of this project. In order to relate the differences observed between the seismic attributes seen on the multiple 3D seismic surveys and the actual location of the CO{sub 2}, a predictive reservoir simulation model was developed based on seismic attributes obtained from the base 3D seismic survey and available well data. This simulation predicted that the CO{sub 2} injected into the reef would remain in the northern portion of the field. Two new wells, the State Charlton 4-30 and the Larsen 3-31, were drilled into the field in 2006 and 2008 respectively and supported this assessment. A second (or 'Monitor') 3D seismic survey was acquired during September 2007 over most of the field and duplicated the first (Base) survey, as much as possible. However, as the simulation and new well data available at that time indicated that the CO{sub 2} was concentrated in the northern portion of the field, the second seismic survey was not acquired over the extreme southern end of the area covered by the original (or Base) 3D survey. Basic processing was performed on the second 3D seismic survey and, finally, 4D processing methods were applied to both the Base and the Monitor surveys. In addition to this 3D data, a shear wave seismic data set was obtained at the same time. Interpretation of the 4D seismic data indicated that a significant amplitude change, not attributable to differences in acquisition or processing, existed at the locations within the reef predicted by the reservoir simulation. The reservoir simulation was based on the porosity distribution obtained from seismic attributes from the Base 3D survey. Using this validated reservoir simulation the location of oil within the reef at the time the Monitor survey was obtained and recommendations made for the drilling of additional EOR wells. The economic impact of this project has been estimated in terms of both enhanced oil recovery and CO{sub 2} sequestration potential. In the northern Michigan Basin alone, the Niagaran reef play is comprised of over 700 Niagaran reefs with reservoirs already depleted by primary production. Potentially there is over 1 billion bbls of oil (original oil in place minus primary recovery) remains in the reefs in Michigan, much of which could be more efficiently mobilized utilizing techniques similar to those employed in this study.

  17. Monitoring CO 2 sequestration into deep saline aquifer and associated salt intrusion using coupled multiphase flow modeling and time lapse electrical resistivity tomography

    SciTech Connect (OSTI)

    Chuan Lu; CHI Zhang; Hai Hanag; Timothy C. Johnson

    2014-04-01

    Successful geological storage and sequestration of carbon dioxide (CO2) require efficient monitoring of the migration of CO2 plume during and after large-scale injection in order to verify the containment of the injected CO2 within the target formation and to evaluate potential leakage risk. Field studies have shown that surface and cross-borehole electrical resistivity tomography (ERT) can be a useful tool in imaging and characterizing solute transport in heterogeneous subsurface. In this synthetic study, we have coupled a 3-D multiphase flow model with a parallel 3-D time-lapse ERT inversion code to explore the feasibility of using time-lapse ERT for simultaneously monitoring the migration of CO2 plume in deep saline formation and potential brine intrusion into shallow fresh water aquifer. Direct comparisons of the inverted CO2 plumes resulting from ERT with multiphase flow simulation results indicate the ERT could be used to delineate the migration of CO2 plume. Detailed comparisons on the locations, sizes and shapes of CO2 plume and intruded brine plumes suggest that ERT inversion tends to underestimate the area review of the CO2 plume, but overestimate the thickness and total volume of the CO2 plume. The total volume of intruded brine plumes is overestimated as well. However, all discrepancies remain within reasonable ranges. Our study suggests that time-lapse ERT is a useful monitoring tool in characterizing the movement of injected CO2 into deep saline aquifer and detecting potential brine intrusion under large-scale field injection conditions.

  18. Live Cells as Dynamic Laboratories: Time Lapse Raman Spectral Microscopy of Nanoparticles with Both IgE Targeting and pH-Sensing Functions

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Nowak-Lovato, Kristy L.; Rector, Kirk D.

    2012-01-01

    This review captures the use of live cells as dynamic microlaboratories through implementation of labeled nanoparticles (nanosensors) that have both sensing and targeting functions. The addition of 2,4-?-dinitrophenol-L-lysine (DNP) as a Fc?RI targeting ligand and 4-mercaptopyridine (4-MPy) as a pH-sensing ligand enables spatial and temporal monitoring of Fc?RI receptors and their pH environment within the endocytic pathway. To ensure reliability, the sensor is calibrated in vivo using the ionophore nigericin and standard buffer solutions to equilibrate the external [ H + ] concentration with that of the cell compartments.more »This review highlights the nanosensors, ability to traffic and respond to pH of receptor-bound nanosensors (1) at physiological temperature ( 37 ° C ) versus room temperature ( 25 ° C ) , (2) after pharmacological treatment with bafilomycin, an H + ATPase pump inhibitor, or amiloride, an inhibitor of Na + / H + exchange, and (3) in response to both temperature and pharmacological treatment. Whole-cell, time lapse images are demonstrated to show the ability to transform live cells into dynamic laboratories to monitor temporal and spatial endosomal pH. The versatility of these probes shows promise for future applications relevant to intracellular trafficking and intelligent drug design. « less

  19. Progress Report, December 2010: Improved Site Characterization And Storage Prediction Through Stochastic Inversion Of Time-Lapse Geophysical And Geochemical Data

    SciTech Connect (OSTI)

    Ramirez, A; Mcnab, W; Carle, S; Hao, Y; White, D; Johnson, J

    2010-12-17

    Over the last project six months, our project activities have concentrated on three areas: (1) performing a stochastic inversion of pattern 16 seismic data to deduce reservoir permeability, (2) development of the geochemical inversion strategy and implementation of associated software, and (3) completing the software implementation of TProGS and the geostatistical analysis that provides the information needed when using the software to produce realizations of the Midale reservoir. The report partially the following deliverables: D2: Model development: MCMC tool (synthetic fluid chemistry data); deliverable completed. D4: Model development/verification: MCMC tool (TProGS, field seismic/chemistry data) work product; deliverable requirements partially fulfilled. D5: Field-based single-pattern simulations work product; deliverable requirements partially fulfilled. When completed, our completed stochastic inversion tool will explicitly integrate reactive transport modeling, facies-based geostatistical methods, and a novel stochastic inversion technique to optimize agreement between observed and predicted storage performance. Such optimization will be accomplished through stepwise refinement of: (1) the reservoir model - principally its permeability magnitude and heterogeneity - and (2) geochemical parameters - primarily key mineral volume fractions and kinetic data. We anticipate that these refinements will facilitate significantly improved history matching and forward modeling of CO{sub 2} storage. Our tool uses the Markov Chain Monte Carlo (MCMC) methodology. Deliverable D1, previously submitted as a report titled ''Development of a Stochastic Inversion Tool To Optimize Agreement Between The Observed And Predicted Seismic Response To CO{sub 2} Injection/Migration in the Weyburn-Midale Project'' (Ramirez et al., 2009), described the stochastic inversion approach that will identify reservoir models that optimize agreement between the observed and predicted seismic response. The software that implements this approach has been completed, tested, and used to process seismic data from pattern 16. A previously submitted report titled ''Model verification: synthetic single pattern simulations using seismic reflection data'', Ramirez et al. 2010, partially fulfilled deliverable D3 by summarizing verification activities that evaluate the performance of the seismic software and its ability to recover reservoir model permeabilities using synthetic seismic reflection data. A future progress report will similarly describe summarizing verification activities of the geochemical inversion software, thereby completing deliverable D3. This document includes a chapter that shows and discusses permeability models produced by seismic inversion that used seismic data from pattern 16 in Phase 1A. It partially fulfills deliverable D5: Field-based single-pattern simulations work product. The D5 work product is supposed to summarize the results of applying NUFT/MCMC to refine the reservoir model and geochemical parameters by optimizing observation/prediction agreement for the seismic/geochemical response to CO{sub 2} injection/migration within a single pattern of Phase 1A/1B. A future progress report will show inversion results for the same pattern using geochemical data, thereby completing deliverable D5. This document also contains a chapter that fulfills deliverable D2: Model development: MCMC tool (synthetic fluid chemistry data). The chapter will summarize model development activities required to facilitate application of NUFT/MCMC to optimize agreement between the observed and predicted geochemical response to CO{sub 2} injection/migration. Lastly, this document also contains a chapter that partially fulfills deliverable D4: Model development/verification: MCMC tool (TProGS, field seismic/chemistry data) work product. This work product is supposed to summarize model development activities required for (1) application of TProGS to Weyburn, (2) use of TProGS within the MCMC tool, and (3) application of the MCMC tool to address field seismic and g

  20. Temporal Integration of Seismic Traveltime Tomography

    E-Print Network [OSTI]

    Ajo-Franklin, Jonathan B.

    2005-06-01

    Time-lapse geophysical measurements and seismic imaging methods in particular are powerful techniques

  1. Time lapse HDR: time lapse photography with high dynamic range images 

    E-Print Network [OSTI]

    Clark, Brian Sean

    2005-08-29

    for assembling HDR images. Greg Ward, creator of the Radiance software package, released soft- 21 ware called Photosphere that also assembles HDR images from multiple exposures. He also released a command line utility called hdrgen, which I found to be the most... utilities or commercial software packages such as Adobe?s After Effects. 31 CHAPTER IV IMPLEMENTATION This is the story of my process to assemble the tools to create a pipeline for creating sequences of HDR images and bringing them back into LDR, and then my...

  2. Data Integration for the Generation of High Resolution Reservoir Models

    SciTech Connect (OSTI)

    Albert Reynolds; Dean Oliver; Gaoming Li; Yong Zhao; Chaohui Che; Kai Zhang; Yannong Dong; Chinedu Abgalaka; Mei Han

    2009-01-07

    The goal of this three-year project was to develop a theoretical basis and practical technology for the integration of geologic, production and time-lapse seismic data in a way that makes best use of the information for reservoir description and reservoir performance predictions. The methodology and practical tools for data integration that were developed in this research project have been incorporated into computational algorithms that are feasible for large scale reservoir simulation models. As the integration of production and seismic data require calibrating geological/geostatistical models to these data sets, the main computational tool is an automatic history matching algorithm. The following specific goals were accomplished during this research. (1) We developed algorithms for calibrating the location of the boundaries of geologic facies and the distribution of rock properties so that production and time-lapse seismic data are honored. (2) We developed and implemented specific procedures for conditioning reservoir models to time-lapse seismic data. (3) We developed and implemented algorithms for the characterization of measurement errors which are needed to determine the relative weights of data when conditioning reservoir models to production and time-lapse seismic data by automatic history matching. (4) We developed and implemented algorithms for the adjustment of relative permeability curves during the history matching process. (5) We developed algorithms for production optimization which accounts for geological uncertainty within the context of closed-loop reservoir management. (6) To ensure the research results will lead to practical public tools for independent oil companies, as part of the project we built a graphical user interface for the reservoir simulator and history matching software using Visual Basic.

  3. Time-lapse seismic monitoring of subsurface fluid flow 

    E-Print Network [OSTI]

    Yuh, Sung H.

    2004-09-30

    ) 1996 reservoir model (b) 1997 reser- voir model, and (c) difference traces. . . . . . . . . . . . . . . . . . . 92 6.9 (a) Amplitudes computed from the reservoir model. (b) Ampli- tudes from field seismic data (Straub et al., 2000.... One of goals of 4D seismic monitoring is to find bypassed hydrocarbon with comparison of forward model results and images from field data; however, there are significant uncertainties in the simplified reservoir models due to heterogeneity of the earth...

  4. Numerical modeling of fluid flow and time-lapse seismograms ...

    E-Print Network [OSTI]

    gabriela

    is separated from natural gas produced and is currently being injected into the Utsira Sand, a saline aquifer. • Injection started in 1996 and is planned to ...

  5. NUMERICAL MODELING OF FLUID FLOW AND TIME-LAPSE ...

    E-Print Network [OSTI]

    gabriela

    CO2 injection operation at the Sleipner gas field in the North Sea, operated by Statoil ... The simultaneous flow of brine and CO2 is modeled with the Black-Oil formulation for ..... As water saturation is reduced, and the larger pores drained first, ...

  6. OMEGA EP Building Construction Time Lapse Movie Gallery - Laboratory for

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefieldSulfateSciTechtail.Theory ofDid you notHeatMaRIEdioxideUser Work FeaturedNuclearNP- LaboratoryLaser

  7. CX-011255: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Time-lapse Joint Inversion of Geophysical Data and its Application to Geothermal Prospecting CX(s) Applied: A9, B3.1 Date: 09/30/2013 Location(s): Colorado Offices(s): Golden Field Office

  8. DOE 1.5 Installation Time Lapse Video (Text Version) | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submit theCovalent Bonding Low-Cost Ground8 GasDEVELOPMENTS E Natural3-WashingDOE 1.5

  9. Multiphase fluid flow and time lapse seismics UNLP, 11 Octubre de

    E-Print Network [OSTI]

    santos

    The analysis of CO2 underground storage safety in the long term is a current area of research. ... the above PVT data. The Black-Oil equations for two-phase flow ...

  10. Time-lapse crosswell seismic and VSP monitoring of injected CO2 in a brine aquifer

    E-Print Network [OSTI]

    Daley, Thomas M.; Myer, Larry R.; Peterson, J.E.; Majer, E.L.; Hoversten, G.M.

    2006-01-01

    Seismic Exploration, 14, Elsevier. Harris J.M. , Nolen-Seismic Profiling: Principles, Handbook of Geophysical Exploration:of Seismic Traveltime Tomography. Society of Exploration

  11. Fast History Matching of Time-Lapse Seismic and Production-Data for High Resolution Models 

    E-Print Network [OSTI]

    Rey Amaya, Alvaro

    2012-10-19

    Seismic data have been established as a valuable source of information for the construction of reservoir simulation models, most commonly for determination of the modeled geologic structure, and also for population of static petrophysical properties...

  12. Synthetic versus real time-lapse seismic data at the Sleipner CO2 ...

    E-Print Network [OSTI]

    artsrj

    2007-04-10

    injection project specifically for greenhouse gas mitigation. CO2 separated from natural gas is being injected into the. Utsira Sand (Figure 1), a major .... Survey of Denmark), IFP (Institute Francais du Petrole),. TNO (Netherlands Institute of ...

  13. The maximum time interval of time-lapse photography for monitoring construction operations 

    E-Print Network [OSTI]

    Choi, Ji Won

    2005-11-01

    sec. 40 sec. 60 sec 3 min. 5 min. 10 min. E-B1 10.42% 11.47% 13.08% 17.00% 18.78% 18.75% 32.50% 47.03% 49.67% E-B2 5.36% 6.58% 12.14% 16.19% 12.69% 30.17% 27.97% 44.81% 35.97% E-H1 6.83% 12.08% 16.28% 19.92% 31.33% 25.22% 30.50% 39.64% 20.81% E-H2...

  14. Sensitivity of time lapse seismic data to the compliance of hydraulic fractures

    E-Print Network [OSTI]

    Fang, Xinding

    2013-01-01

    We study the sensitivity of seismic waves to changes in the fracture normal and tangential compliances by analyzing the fracture sensitivity wave equation, which is derived by differentiating the elastic wave equation with ...

  15. Time-lapse crosswell seismic and VSP monitoring of injected CO2 in a brine aquifer

    E-Print Network [OSTI]

    Daley, Thomas M.; Myer, Larry R.; Peterson, J.E.; Majer, E.L.; Hoversten, G.M.

    2006-01-01

    monitoring with the RST Reservoir Saturation Tool. Oilfieldare Schlumberger's reservoir saturation tool (RST) (Adolph,Fluid Saturation Prediction in a Multicomponent Reservoir,

  16. The feasibility of reservoir monitoring using time-lapse marine CSEM Arnold Orange1

    E-Print Network [OSTI]

    Constable, Steve

    , and Steven Constable1 ABSTRACT Monitoring changes in hydrocarbon reservoir geometry and pore-fluid properties reservoir is replaced by conductive pore fluids. However, to avoid corrupting the rel- atively small signal as a tool for assessing the resistivity of targets identi- fied by seismic surveys prior to drilling e

  17. Simulation of production and elastic properties of reservoirs to validate time-lapse seismics.

    E-Print Network [OSTI]

    Guerin, Gilles

    -indicative attributes can help determine drilling targets where hydrocarbons remain after several years of production and spatial distribution of the well data that are used as reference. Both, the 4D seismic analysis and the petrophysical characterization, require an independent validation or calibration. In this paper, we describe how

  18. Time lapse seismic signal analysis for Cranfield, MS, EOR and CCS site Ditkof, J.1

    E-Print Network [OSTI]

    Texas at Austin, University of

    of CO2 remain in the subsurface. In 2007 and 2010, 3D seismic surveys were shot and an initial 4D seismic response was characterized showing coherent amplitude anomalies in some areas which received large and acoustic impedance change through the reservoir. The two seismic volumes were cross

  19. Time-lapse crosswell seismic and VSP monitoring of injected CO2 in a brine aquifer

    E-Print Network [OSTI]

    Daley, Thomas M.; Myer, Larry R.; Peterson, J.E.; Majer, E.L.; Hoversten, G.M.

    2006-01-01

    crosswell and vertical seismic profile (VSP), were acquiredof crosswell and vertical seismic profile (VSP) experiments.

  20. Coda-wave interferometry analysis of time-lapse VSP data for monitoring geological carbon sequestration

    E-Print Network [OSTI]

    Zhou, R.

    2010-01-01

    Monitoring Geological Carbon Sequestration Authors: RongmaoGeological Carbon Sequestration ABSTRACT Injection andmonitoring geological carbon sequestration. ACKNOWLEDGEMENTS

  1. Entropy-Bayesian Inversion of Time-Lapse Tomographic GPR data for

    Office of Scientific and Technical Information (OSTI)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefieldSulfate Reducing(Journal Article) | SciTech(Journal(Patent) |(Journal Article)dopingModelMonitoring

  2. Entropy-Bayesian Inversion of Time-Lapse Tomographic GPR data for

    Office of Scientific and Technical Information (OSTI)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefieldSulfate Reducing(Journal Article) | SciTech(Journal(Patent) |(Journal

  3. Time-lapse Joint Inversion of Geophysical Data and its Applications to

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankADVANCEDInstallers/ContractorsPhotovoltaicsState ofSavings for Specific2HeldTidal EnergyTimGeothermal

  4. Entropy-Bayesian Inversion of Time-Lapse Tomographic GPR data for

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submitKansasCommunities EnergyU.S.Engineering Metal(2) Cu (3)EnricoBillionMonitoring

  5. Entropy-Bayesian Inversion of Time-Lapse Tomographic GPR data for

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submitKansasCommunities EnergyU.S.Engineering Metal(2) Cu

  6. Report Title: Mapping of Reservoir Properties and Facies Through Integration of Static and Dynamic Data

    E-Print Network [OSTI]

    Reynolds, Albert C.

    End Date: September 30, 2003 Principal Authors: Albert C. Reynolds, Dean S. Oliver, Yannong Dong, Ning of History Matching with Different Algorithms . . . . . . . . . . . . 39 TIME LAPSE SEISMIC DATA 46 Automatic

  7. CX-007391: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Time-lapse Joint Inversion of Geophysical Data and its Application to Geothermal Prospecting GEODE CX(s) Applied: A9, B3.1, B3.6 Date: 12/21/2011 Location(s): Colorado Offices(s): Golden Field Office

  8. CX-007889: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Time-lapse Joint Inversion of Geophysical Data and its Application to Geothermal Prospecting GEODE CX(s) Applied: A9, B3.1, B3.6, B3.11 Date: 02/10/2012 Location(s): Colorado Offices(s): Golden Field Office

  9. Time-lapse gravity monitoring: A systematic 4D approach with application to aquifer storage and recovery

    E-Print Network [OSTI]

    . An abandoned underground coal mine has been developed into a subsurface water reservoir. Water from surface, has turned to an abandoned underground room and pillar coal mine, the Leyden mine, as a solution for water storage. This alternative so- lution is advantageous because abandoned underground coal mines have

  10. Final Report: Improved Site Characterization And Storage Prediction Through Stochastic Inversion Of Time-Lapse Geophysical And Geochemical Data

    SciTech Connect (OSTI)

    Ramirez, A; Mcnab, W; Hao, Y; White, D; Johnson, J

    2011-04-14

    During the last months of this project, our project activities have concentrated on four areas: (1) performing a stochastic inversion of pattern 16 seismic data to deduce reservoir bulk/shear moduli and density; the need for this inversion was not anticipated in the original scope of work, (2) performing a stochastic inversion of pattern 16 seismic data to deduce reservoir porosity and permeability, (3) complete the software needed to perform geochemical inversions and (4) use the software to perform stochastic inversion of aqueous chemistry data to deduce mineral volume fractions. This report builds on work described in progress reports previously submitted (Ramirez et al., 2009, 2010, 2011 - reports fulfilled the requirements of deliverables D1-D4) and fulfills deliverable D5: Field-based single-pattern simulations work product. The main challenge with our stochastic inversion approach is its large computational expense, even for single reservoir patterns. We dedicated a significant level of effort to improve computational efficiency but inversions involving multiple patterns were still intractable by project's end. As a result, we were unable to fulfill Deliverable D6: Field-based multi-pattern simulations work product.

  11. AUTOMATED MONITORING OF HUMAN EMBRYONIC CELLS UP TO THE 5-CELL STAGE IN TIME-LAPSE MICROSCOPY IMAGES

    E-Print Network [OSTI]

    Gould, Stephen

    fertilization (IVF) treatments. Automated prediction of the embryo viability, by tracking cell divisions up infertility. The suc- cess of these methods relies on identifying the most viable embryos. In most cases

  12. Box Integrals

    E-Print Network [OSTI]

    Bailey, David H.; Borwein, Jonathan M.; Crandall, Richard E.

    2006-01-01

    Box integrals D.H. Bailey ? J.M. Borwein † April 3,Abstract. By a “box integral” we mean here an expectation |r· dr n . The study of box integrals leads one naturally into

  13. TRIPLE INTEGRALS Studying triple integrals

    E-Print Network [OSTI]

    Knopf, Dan

    TRIPLE INTEGRALS Studying triple integrals of functions of three variables is a natural step up from the two variable case. It's a very important one for applications. Now the domain of integration in 3- space as double integrals, which in turn were expressed as repeated integrals. As a result

  14. Grid Integration

    SciTech Connect (OSTI)

    Not Available

    2008-09-01

    Summarizes the goals and activities of the DOE Solar Energy Technologies Program efforts within its grid integration subprogram.

  15. Insolation integrator

    DOE Patents [OSTI]

    Dougherty, John J. (Norristown, PA); Rudge, George T. (Lansdale, PA)

    1980-01-01

    An electric signal representative of the rate of insolation is integrated to determine if it is adequate for operation of a solar energy collection system.

  16. Characterizing the DNA damage response by cell tracking algorithms and cell features classification using high-content time-lapse analysis

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Georgescu, Walter; Osseiran, Alma; Rojec, Maria; Liu, Yueyong; Bombrun, Maxime; Tang, Jonathan; Costes, Sylvain V.; Huen, Michael Shing-Yan

    2015-06-24

    Traditionally, the kinetics of DNA repair have been estimated using immunocytochemistry by labeling proteins involved in the DNA damage response (DDR) with fluorescent markers in a fixed cell assay. However, detailed knowledge of DDR dynamics across multiple cell generations cannot be obtained using a limited number of fixed cell time-points. Here we report on the dynamics of 53BP1 radiation induced foci (RIF) across multiple cell generations using live cell imaging of non-malignant human mammary epithelial cells (MCF10A) expressing histone H2B-GFP and the DNA repair protein 53BP1-mCherry. Using automatic extraction of RIF imaging features and linear programming techniques, we were ablemore »to characterize detailed RIF kinetics for 24 hours before and 24 hours after exposure to low and high doses of ionizing radiation. High-content-analysis at the single cell level over hundreds of cells allows us to quantify precisely the dose dependence of 53BP1 protein production, RIF nuclear localization and RIF movement after exposure to X-ray. Using elastic registration techniques based on the nuclear pattern of individual cells, we could describe the motion of individual RIF precisely within the nucleus. We show that DNA repair occurs in a limited number of large domains, within which multiple small RIFs form, merge and/or resolve with random motion following normal diffusion law. Large foci formation is shown to be mainly happening through the merging of smaller RIF rather than through growth of an individual focus. We estimate repair domain sizes of 7.5 to 11 µm2 with a maximum number of ~15 domains per MCF10A cell. This work also highlights DDR which are specific to doses larger than 1 Gy such as rapid 53BP1 protein increase in the nucleus and foci diffusion rates that are significantly faster than for spontaneous foci movement. We hypothesize that RIF merging reflects a "stressed" DNA repair process that has been taken outside physiological conditions when too many DSB occur at once. High doses of ionizing radiation lead to RIF merging into repair domains which in turn increases DSB proximity and misrepair. Such finding may therefore be critical to explain the supralinear dose dependence for chromosomal rearrangement and cell death measured after exposure to ionizing radiation.« less

  17. Characterizing the DNA damage response by cell tracking algorithms and cell features classification using high-content time-lapse analysis

    SciTech Connect (OSTI)

    Georgescu, Walter; Osseiran, Alma; Rojec, Maria; Liu, Yueyong; Bombrun, Maxime; Tang, Jonathan; Costes, Sylvain V.; Huen, Michael Shing-Yan

    2015-06-24

    Traditionally, the kinetics of DNA repair have been estimated using immunocytochemistry by labeling proteins involved in the DNA damage response (DDR) with fluorescent markers in a fixed cell assay. However, detailed knowledge of DDR dynamics across multiple cell generations cannot be obtained using a limited number of fixed cell time-points. Here we report on the dynamics of 53BP1 radiation induced foci (RIF) across multiple cell generations using live cell imaging of non-malignant human mammary epithelial cells (MCF10A) expressing histone H2B-GFP and the DNA repair protein 53BP1-mCherry. Using automatic extraction of RIF imaging features and linear programming techniques, we were able to characterize detailed RIF kinetics for 24 hours before and 24 hours after exposure to low and high doses of ionizing radiation. High-content-analysis at the single cell level over hundreds of cells allows us to quantify precisely the dose dependence of 53BP1 protein production, RIF nuclear localization and RIF movement after exposure to X-ray. Using elastic registration techniques based on the nuclear pattern of individual cells, we could describe the motion of individual RIF precisely within the nucleus. We show that DNA repair occurs in a limited number of large domains, within which multiple small RIFs form, merge and/or resolve with random motion following normal diffusion law. Large foci formation is shown to be mainly happening through the merging of smaller RIF rather than through growth of an individual focus. We estimate repair domain sizes of 7.5 to 11 µm2 with a maximum number of ~15 domains per MCF10A cell. This work also highlights DDR which are specific to doses larger than 1 Gy such as rapid 53BP1 protein increase in the nucleus and foci diffusion rates that are significantly faster than for spontaneous foci movement. We hypothesize that RIF merging reflects a "stressed" DNA repair process that has been taken outside physiological conditions when too many DSB occur at once. High doses of ionizing radiation lead to RIF merging into repair domains which in turn increases DSB proximity and misrepair. Such finding may therefore be critical to explain the supralinear dose dependence for chromosomal rearrangement and cell death measured after exposure to ionizing radiation.

  18. A field comparison of Fresnel zone and ray-based GPR attenuation-difference tomography for time-lapse imaging of

    E-Print Network [OSTI]

    Barrash, Warren

    A field comparison of Fresnel zone and ray-based GPR attenuation-difference tomography for time the medium. These sensitivities occupy the first Fresnel zone, account for the finite frequency nature

  19. Assessing Uncertainty and Repeatability in Time-Lapse VSP Monitoring of CO2 Injection in a Brine Aquifer, Frio Formation, Texas (A Case Study)

    E-Print Network [OSTI]

    Nazari, S.

    2014-01-01

    land-based sand reservoirs, and waterflood in marine-basedGoM-Nsea soft sand, high-GOR oil, waterflood High Med-lowNsea medium sand, low- GOR oil, waterflood High Medium W.

  20. ContentsContents1133integration integration

    E-Print Network [OSTI]

    Vickers, James

    ContentsContents1133integration integration 1. Basic concepts of integration 2. Definite integrals 3. The area bounded by a curve 4. Integration by parts 5. Integration by substitution and using partial fractions 6. Integration of trigonometric functions Learning outcomes In this workbook you

  1. Integrability Singular reduction

    E-Print Network [OSTI]

    Patrick, George

    Motivation Integrability Singular reduction Integration of Singular quotients Summary References Singular reduction of Poisson manifolds and integrability Rui L. Fernandes1 Joint work with J.P. Ortega Fernandes Singular reduction and integrability #12;Motivation Integrability Singular reduction Integration

  2. Residential Buildings Integration (RBI)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    7 RBI Priorities for FY15 and Beyond Integrating Advanced Technologies for Homes: * Building integrated renewables * IAQVentilation solutions * Integrated high performance...

  3. Integrating Module

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet)DecadeYear Jan Feb Mar Apr MayYearYear JanDecade Year-0per6,167,3715) Integrating

  4. Integrated EPC

    SciTech Connect (OSTI)

    Kerby, L.A. [Calpine Corp., San Jose, CA (United States)

    1995-11-01

    A continuing challenge facing the independent power industry is building better plants at lower cost. Price considerations have forced many developers to re-focus their capabilities to create viable, new alternatives to traditional turnkey project contracts. Prompted by such pressures, Calpine Corp. recently created its own internal, integrated solution to project development which provides more control and input for a project owner and manager while establishing a solid set of guarantees to non-recourse lenders through a program of warranties and overall insurance coverage. The proof case for Calpine-Construct is the Sumas Project, a 125 MW gas-fired cogeneration plant in Sumas, WA, near the Canadian border. The Sumas project demonstrates how owners, suppliers and contractors, working together on site, can be readily able to solve construction problems.

  5. Integral Invariant Signatures

    E-Print Network [OSTI]

    S. Manay; A. J. Yezzi; B. W. Hong; S. Soatto

    2004-01-01

    Projective curvature and integral invariants. IJCV, 40(3):a database of 23 shapes. Integral Invariant Signatures 7. A.C. Lopez, and J. M. Morel. Integral and local a?ne invariant

  6. Integral invariant signatures

    E-Print Network [OSTI]

    Manay, S; Hong, B W; Yezzi, A J; Soatto, Stefano

    2004-01-01

    Projective curvature and integral invariants. IJCV, 40(3):a database of 23 shapes. Integral Invariant Signatures 7. A.C. Lopez, and J. M. Morel. Integral and local a?ne invariant

  7. Distribution Grid Integration

    Broader source: Energy.gov [DOE]

    The DOE Systems Integration team funds distribution grid integration research and development (R&D) activities to address the technical issues that surround distribution grid planning,...

  8. Thermal Control & System Integration

    Broader source: Energy.gov [DOE]

    The thermal control and system integration activity focuses on issues such as the integration of motor and power control technologies and the development of advanced thermal control technologies....

  9. The Cauchy Integral Formula

    E-Print Network [OSTI]

    Steve Bell

    2009-06-24

    Feb 23, 2009 ... Cauchy Integral Formula basics. I'm using the enumerate environment on this slide. 1. The Cauchy Integral Formula was discovered by Cauchy ...

  10. The Cauchy Integral Formula

    E-Print Network [OSTI]

    Feb 23, 2009 ... Cauchy Integral Formula basics I'm using the enumerate environment on this slide. The Cauchy Integral Formula was discovered by Cauchy.

  11. Random integral currents

    E-Print Network [OSTI]

    M. Zyskin

    2010-05-12

    For nice functions, invariant means over integral currents (certain generalized surfaces), can be uniquely defined.

  12. Wind Integration Study Methods (Presentation)

    SciTech Connect (OSTI)

    Milligan, M.; Kirby, B.

    2011-04-01

    This presentation provides an overview of common elements, differences, integration costs, and errors in integration analysis.

  13. INTEGRATING PHOTOVOLTAIC SYSTEMS

    E-Print Network [OSTI]

    Delaware, University of

    INTEGRATING PHOTOVOLTAIC SYSTEMS INTO PUBLIC SECTOR PERFORMANCE CONTRACTS IN DELAWARE FINAL for Energy and Environmental Policy University of Delaware February 2006 #12;INTEGRATING PHOTOVOLTAIC..................................................................................................... 1 1.2 Photovoltaics in Performance Contracts: An Overview

  14. Research Misconduct (Research Integrity

    E-Print Network [OSTI]

    Wapstra, Erik

    Research Misconduct (Research Integrity Coordinator report) Glossary ADR Associate Dean Research ANDS Australian National Data Sharing ITS Information Technology Services NeCTAR National eResearch Collaboration Tools and Resources RSDI Research Storage Data Infrastructure input Research Integrity Advisors

  15. Transmission Commercial Project Integration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Market Generator Interconnection Reform Implementation Network Integration Transmission Service (NT Service) Network Open Season (NOS) PTSA Reform North American Energy...

  16. CX-010730: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Paisley Geothermal Integration CX(s) Applied: B1.7 Date: 08/09/2013 Location(s): Oregon Offices(s): Bonneville Power Administration

  17. CX-009166: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Integration of Waste Heat Recovery, Waste-to-Energy Conversion, and Waste-to-Chemical Conversion with Industrial Gas and Chemical Manufacturing Processes CX(s) Applied:...

  18. Integrated rural energy planning

    SciTech Connect (OSTI)

    El Mahgary, Y.; Biswas, A.K.

    1985-01-01

    This book presents papers on integrated community energy systems in developing countries. Topics considered include an integrated rural energy system in Sri Lanka, rural energy systems in Indonesia, integrated rural food-energy systems and technology diffusion in India, bringing energy to the rural sector in the Philippines, the development of a new energy village in China, the Niaga Wolof experimental rural energy center, designing a model rural energy system for Nigeria, the Basaisa village integrated field project, a rural energy project in Tanzania, rural energy development in Columbia, and guidelines for the planning, development and operation of integrated rural energy projects.

  19. The universal path integral

    E-Print Network [OSTI]

    Seth Lloyd; Olaf Dreyer

    2013-02-12

    Path integrals represent a powerful route to quantization: they calculate probabilities by summing over classical configurations of variables such as fields, assigning each configuration a phase equal to the action of that configuration. This paper defines a universal path integral, which sums over all computable structures. This path integral contains as sub-integrals all possible computable path integrals, including those of field theory, the standard model of elementary particles, discrete models of quantum gravity, string theory, etc. The universal path integral possesses a well-defined measure that guarantees its finiteness, together with a method for extracting probabilities for observable quantities. The universal path integral supports a quantum theory of the universe in which the world that we see around us arises out of the interference between all computable structures.

  20. Integral and Euclidean Ramsey theory

    E-Print Network [OSTI]

    Tressler, Eric

    2010-01-01

    CALIFORNIA, SAN DIEGO Integral and Euclidean Ramsey Theory Ax ABSTRACT OF THE DISSERTATION Integral and Euclidean Ramsey

  1. TVA's Integrated River System

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and controlling floods. So far as may be consistent with such purposes, ...for the generation of electric energy... TVA Power Service Area TVA'S INTEGRATED RIVER SYSTEM | 3...

  2. The Cauchy Integral Formula

    E-Print Network [OSTI]

    2009-06-24

    Feb 23, 2009 ... Integral. Formula. Steve Bell. A slide with a definition and a theorem. Definition. The residue of an analytic function f at an isolated singularity.

  3. Sandia Energy - Grid Integration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    cybersecurity, energy storage, materials science, advanced controls, and microgrids, and is an integral part of Sandia's larger portfolio of renewable energy technology...

  4. Commercial Buildings Integration

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Buildings Integration Images courtesy CREE, True Manufacturing, A.O. Smith, Bernstein Associates, Cambridge Engineering, Alliance Laundry Systems, NREL 2 Strategic Fit within...

  5. Water Waves and Integrability

    E-Print Network [OSTI]

    Rossen I. Ivanov

    2007-07-12

    The Euler's equations describe the motion of inviscid fluid. In the case of shallow water, when a perturbative asymtotic expansion of the Euler's equations is taken (to a certain order of smallness of the scale parameters), relations to certain integrable equations emerge. Some recent results concerning the use of integrable equation in modeling the motion of shallow water waves are reviewed in this contribution.

  6. Systems Integration (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01

    The Systems Integration (SI) subprogram works closely with industry, universities, and the national laboratories to overcome technical barriers to the large-scale deployment of solar technologies. To support these goals, the subprogram invests primarily in four areas: grid integration, technology validation, solar resource assessment, and balance of system development.

  7. Systems Integration (Fact Sheet)

    SciTech Connect (OSTI)

    DOE Solar Energy Technologies Program

    2011-10-13

    The Systems Integration (SI) subprogram works closely with industry, universities, and the national laboratories to overcome technical barriers to the large-scale deployment of solar technologies. To support these goals, the subprogram invests primarily in four areas: grid integration, technology validation, solar resource assessment, and balance of system development.

  8. WORKPAD: an Adaptive Peer-to-Peer Software Infrastructure for Supporting Collaborative Work of Human

    E-Print Network [OSTI]

    Dustdar, Schahram

    services requiring high computa- tional power, data-knowledge-content integration, and a set of front a different time lapse like floodings or hazardous incidents in nuclear power plants [8]. It is difficult- spectively the coverage of natural and man-made disasters are termed as disaster management activities

  9. Applicability of 2-D Time-Lapse High-Resolution Seismic Reflection Approach to Image Natural Salt-Dissolution and Subsidence in Central Kansas and Improved Post-Processed Vibroseis Data Characteristics

    E-Print Network [OSTI]

    Rice, Daniel

    2009-01-12

    acquired in 2001 across an active subsidence feature. Seismic reflection data were acquired in both 2001 and 2008 across an active sinkhole at the intersection of U.S. Highway 50 and Victory Road in Hutchinson, KS as part of a comprehensive study...

  10. Monitoring the Critical Zone using Time-Lapse Digital Photography. Within the critical zone, important interconnected physical, chemical, and biological processes influence the mass and energy exchange that governs everything from biomass

    E-Print Network [OSTI]

    Papuga, Shirley A.

    , important interconnected physical, chemical, and biological processes influence the mass and energy exchange Focal length: 0.2m to Resolution: 3 MP Power: Solar Panel/Marine Battery Orientation: into main wind; the cost of a traditional snow sensor is about $700 which does not include the price of the datalogger

  11. Effect of over-and under-burden on time-lapse CSEM monitoring capabilities Arash JafarGandomi* and Andrew Curtis, School of GeoSciences, The University of Edinburgh, Kings

    E-Print Network [OSTI]

    .g., Thirud 2002). Strong variation of the resistivity of reservoir rocks with partial fluid saturation (e-lapse monitoring of the subsurface reservoirs with CSEM method. We show that even the introduction of a single-burden the impact of the high-resistivity layer decreases as the high-resistivity layer gets closer to the reservoir

  12. EAGE 64th Conference & Exhibition --Florence, Italy, 27 -30 May 2002 We carry out an inversion study to appraise the ability of time-lapse 3D seismic data to infer

    E-Print Network [OSTI]

    Torres-Verdín, Carlos

    parameters. A water-flood enhanced recovery process is considered as the source responsible for the dynamic in Figure 1, consists of two sand bodies embedded in a background shale layer. The upper sand body is water filled whereas the lower one is saturated with oil. Geometry and dimensions of the sand bodies were

  13. Necessity of integral formalism

    E-Print Network [OSTI]

    Yong Tao

    2011-10-06

    To describe the physical reality, there are two ways of constructing the dynamical equation of field, differential formalism and integral formalism. The importance of this fact is firstly emphasized by Yang in case of gauge field [Phys. Rev. Lett. 33 (1974) 445], where the fact has given rise to a deeper understanding for Aharonov-Bohm phase and magnetic monopole [Phys. Rev. D. 12 (1975) 3845]. In this paper we shall point out that such a fact also holds in general wave function of matter, it may give rise to a deeper understanding for Berry phase. Most importantly, we shall prove a point that, for general wave function of matter, in the adiabatic limit, there is an intrinsic difference between its integral formalism and differential formalism. It is neglect of this difference that leads to an inconsistency of quantum adiabatic theorem pointed out by Marzlin and Sanders [Phys. Rev. Lett. 93 (2004) 160408]. It has been widely accepted that there is no physical difference of using differential operator or integral operator to construct the dynamical equation of field. Nevertheless, our study shows that the Schrodinger differential equation (i.e., differential formalism for wave function) shall lead to vanishing Berry phase and that the Schrodinger integral equation (i.e., integral formalism for wave function), in the adiabatic limit, can satisfactorily give the Berry phase. Therefore, we reach a conclusion: There are two ways of describing physical reality, differential formalism and integral formalism; but the integral formalism is a unique way of complete description.

  14. Integrated assessment briefs

    SciTech Connect (OSTI)

    1995-04-01

    Integrated assessment can be used to evaluate and clarify resource management policy options and outcomes for decision makers. The defining characteristics of integrated assessment are (1) focus on providing information and analysis that can be understood and used by decision makers rather than for merely advancing understanding and (2) its multidisciplinary approach, using methods, styles of study, and considerations from a broader variety of technical areas than would typically characterize studies produced from a single disciplinary standpoint. Integrated assessment may combine scientific, social, economic, health, and environmental data and models. Integrated assessment requires bridging the gap between science and policy considerations. Because not everything can be valued using a single metric, such as a dollar value, the integrated assessment process also involves evaluating trade-offs among dissimilar attributes. Scientists at Oak Ridge National Laboratory (ORNL) recognized the importance and value of multidisciplinary approaches to solving environmental problems early on and have pioneered the development of tools and methods for integrated assessment over the past three decades. Major examples of ORNL`s experience in the development of its capabilities for integrated assessment are given.

  15. Manifold Integration: Data Integration on Multiple Manifolds 

    E-Print Network [OSTI]

    Choi, Hee Youl

    2011-08-08

    . Hammond, 2008, Association for the Advanced of Artiflcial Intelligence (AAAI-08), Copyright 2008 by AAAI. c 2005 IEEE. Partially reprinted, with permission, from IEEE Int. Conf. on Devel- opment and Learning \\Kernel Isomap on Noisy Manifold" H. Choi... and S. Choi. For more information go to http://thesis.tamu.edu/forms/IEEE permission note.pdf. c 2010 IEEE. Partially reprinted, with permission, from IEEE Int. Conf. Acoustics, Speech and Signal Processing \\Learning Alpha-Integration with Partially...

  16. PEV Integration with Renewables (Presentation)

    SciTech Connect (OSTI)

    Markel, T.

    2014-06-18

    This presentation discusses current research at NREL on integrating plug-in electric vehicles with the grid and using renewable energy to charge the grid. The Electric Vehicle Grid Integration (EVGI) and Integrated Network Testbed for Energy Grid Research and Technology Experimentation (INTEGRATE) are addressing the opportunities and technical requirements for vehicle grid integration that will increase marketability and lead to greater petroleum reduction.

  17. On Quantum Integrable Systems

    SciTech Connect (OSTI)

    Danilov, Viatcheslav; /Oak Ridge; Nagaitsev, Sergei; /Fermilab

    2011-11-01

    Many quantum integrable systems are obtained using an accelerator physics technique known as Ermakov (or normalized variables) transformation. This technique was used to create classical nonlinear integrable lattices for accelerators and nonlinear integrable plasma traps. Now, all classical results are carried over to a nonrelativistic quantum case. In this paper we have described an extension of the Ermakov-like transformation to the Schroedinger and Pauli equations. It is shown that these newly found transformations create a vast variety of time dependent quantum equations that can be solved in analytic functions, or, at least, can be reduced to time-independent ones.

  18. Integrated Energy Efficiency 

    E-Print Network [OSTI]

    Heins, S.

    2007-01-01

    II – Energy Management System Demand Meter Integration Measurement and Verification Automated Set-points Internet Enabled 9 Phase III – Direct Renewable Minimal Conversion Loss Delivers When Grid is in Need Cost Competitive to Grid Daylight Harvesting... 10 Off The Grid Sensor Integration Natural Daylight Base and Peak Energy Reduction 11 Lowest Cost Renewable Solar Integrated Lighting $1.0 million/MW $6 – 9 million/MW Wind $1.3 - 1.9 million/MW Biomass $1.5 – 2.5 million/MW Geothermal $1.6 million...

  19. On Web Taxonomy Integration

    E-Print Network [OSTI]

    Zhang, Dell

    We address the problem of integrating objects from a source taxonomy into a master taxonomy. This problem is not only pervasive on the nowadays web, but also important to the emerging semantic web. A straightforward approach ...

  20. Systems Integration Competitive Awards

    Broader source: Energy.gov [DOE]

    Through the SunShot Systems Integration efforts, DOE is funding a range of research and development (R&D) projects to advance balance of system hardware technologies, such as racking systems...

  1. Integrated Facilities Disposition Program

    Office of Environmental Management (EM)

    Hole 8 Plume 6 Managed by UT-Battelle for the U.S. Department of Energy Remediating aging waste treatment and collection systems is an integral part of the Central Campus...

  2. Integrals of the Ising Class

    E-Print Network [OSTI]

    Bailey, David H.; Borwein, Jonathan M.; Crandall, Richard E.

    2006-01-01

    represents C 5 as a double integral, namely C 5 M(Q) M(Q) dxthat for any ? ? [0, 1] the integral is bounded below bynatural approximation of the integral over the sub-cube [0,

  3. IDC Integrated Master Plan.

    SciTech Connect (OSTI)

    Clifford, David J.; Harris, James M.

    2014-12-01

    This is the IDC Re-Engineering Phase 2 project Integrated Master Plan (IMP). The IMP presents the major accomplishments planned over time to re-engineer the IDC system. The IMP and the associate Integrated Master Schedule (IMS) are used for planning, scheduling, executing, and tracking the project technical work efforts. REVISIONS Version Date Author/Team Revision Description Authorized by V1.0 12/2014 IDC Re- engineering Project Team Initial delivery M. Harris

  4. Advanced Integrated Systems Technology Development

    E-Print Network [OSTI]

    2013-01-01

    Renewable Energy Technologies Transportation Advanced Integrated Systems Technology Development is the final report for the Advanced Integrated Systems Technology Development project (

  5. Academic Integrity Leiden University Regulation on Complaints regarding Academic Integrity

    E-Print Network [OSTI]

    Galis, Frietson

    are personally responsible for maintaining academic integrity. This means that the general principles appointment. Confidential adviser: The person appointed as confidential adviser for academic integrity violations of academic integrity. #12;Academic Integrity Article 2 General 1. Every person has the right

  6. Integrity Lessons from the WAAS Integrity Performance Panel (WIPP)

    E-Print Network [OSTI]

    Stanford University

    Integrity Lessons from the WAAS Integrity Performance Panel (WIPP) Todd Walter, Per Enge, Stanford that the integrity requirement would be met, the FAA formed the WAAS Integrity Performance Panel (WIPP). The role of the WIPP is to independently assess the safety of WAAS and to recommend system improvements. To accomplish

  7. Partially integrated exhaust manifold

    DOE Patents [OSTI]

    Hayman, Alan W; Baker, Rodney E

    2015-01-20

    A partially integrated manifold assembly is disclosed which improves performance, reduces cost and provides efficient packaging of engine components. The partially integrated manifold assembly includes a first leg extending from a first port and terminating at a mounting flange for an exhaust gas control valve. Multiple additional legs (depending on the total number of cylinders) are integrally formed with the cylinder head assembly and extend from the ports of the associated cylinder and terminate at an exit port flange. These additional legs are longer than the first leg such that the exit port flange is spaced apart from the mounting flange. This configuration provides increased packaging space adjacent the first leg for any valving that may be required to control the direction and destination of exhaust flow in recirculation to an EGR valve or downstream to a catalytic converter.

  8. Smart Grid Integration Laboratory

    SciTech Connect (OSTI)

    Wade Troxell

    2011-09-30

    The initial federal funding for the Colorado State University Smart Grid Integration Laboratory is through a Congressionally Directed Project (CDP), DE-OE0000070 Smart Grid Integration Laboratory. The original program requested in three one-year increments for staff acquisition, curriculum development, and instrumentation â?? all which will benefit the Laboratory. This report focuses on the initial phase of staff acquisition which was directed and administered by DOE NETL/ West Virginia under Project Officer Tom George. Using this CDP funding, we have developed the leadership and intellectual capacity for the SGIC. This was accomplished by investing (hiring) a core team of Smart Grid Systems engineering faculty focused on education, research, and innovation of a secure and smart grid infrastructure. The Smart Grid Integration Laboratory will be housed with the separately funded Integrid Laboratory as part of CSUâ??s overall Smart Grid Integration Center (SGIC). The period of performance of this grant was 10/1/2009 to 9/30/2011 which included one no cost extension due to time delays in faculty hiring. The Smart Grid Integration Laboratoryâ??s focus is to build foundations to help graduate and undergraduates acquire systems engineering knowledge; conduct innovative research; and team externally with grid smart organizations. Using the results of the separately funded Smart Grid Workforce Education Workshop (May 2009) sponsored by the City of Fort Collins, Northern Colorado Clean Energy Cluster, Colorado State University Continuing Education, Spirae, and Siemens has been used to guide the hiring of faculty, program curriculum and education plan. This project develops faculty leaders with the intellectual capacity to inspire its students to become leaders that substantially contribute to the development and maintenance of Smart Grid infrastructure through topics such as: (1) Distributed energy systems modeling and control; (2) Energy and power conversion; (3) Simulation of electrical power distribution system that integrates significant quantities of renewable and distributed energy resources; (4) System dynamic modeling that considers end-user behavior, economics, security and regulatory frameworks; (5) Best practices for energy management IT control solutions for effective distributed energy integration (including security with the underlying physical power systems); (6) Experimental verification of effects of various arrangements of renewable generation, distributed generation and user load types along with conventional generation and transmission. Understanding the core technologies for enabling them to be used in an integrated fashion within a distribution network remains is a benefit to the future energy paradigm and future and present energy engineers.

  9. Integrated heterodyne terahertz transceiver

    DOE Patents [OSTI]

    Lee, Mark (Albuquerque, NM); Wanke, Michael C. (Albuquerque, NM)

    2009-06-23

    A heterodyne terahertz transceiver comprises a quantum cascade laser that is integrated on-chip with a Schottky diode mixer. An antenna connected to the Schottky diode receives a terahertz signal. The quantum cascade laser couples terahertz local oscillator power to the Schottky diode to mix with the received terahertz signal to provide an intermediate frequency output signal. The fully integrated transceiver optimizes power efficiency, sensitivity, compactness, and reliability. The transceiver can be used in compact, fieldable systems covering a wide variety of deployable applications not possible with existing technology.

  10. Bayesian Integrated Microbial Forensics

    SciTech Connect (OSTI)

    Jarman, Kristin H.; Kreuzer-Martin, Helen W.; Wunschel, David S.; Valentine, Nancy B.; Cliff, John B.; Petersen, Catherine E.; Colburn, Heather A.; Wahl, Karen L.

    2008-06-01

    In the aftermath of the 2001 anthrax letters, researchers have been exploring ways to predict the production environment of unknown source microorganisms. Different mass spectral techniques are being developed to characterize components of a microbe’s culture medium including water, carbon and nitrogen sources, metal ions added, and the presence of agar. Individually, each technique has the potential to identify one or two ingredients in a culture medium recipe. However, by integrating data from multiple mass spectral techniques, a more complete characterization is possible. We present a Bayesian statistical approach to integrated microbial forensics and illustrate its application on spores grown in different culture media.

  11. Integrated heterodyne terahertz transceiver

    DOE Patents [OSTI]

    Wanke, Michael C. (Albuquerque, NM); Lee, Mark (Albuquerque, NM); Nordquist, Christopher D. (Albuquerque, NM); Cich, Michael J. (Albuquerque, NM)

    2012-09-25

    A heterodyne terahertz transceiver comprises a quantum cascade laser that is integrated on-chip with a Schottky diode mixer. A terahertz signal can be received by an antenna connected to the mixer, an end facet or sidewall of the laser, or through a separate active section that can amplify the incident signal. The quantum cascade laser couples terahertz local oscillator power to the Schottky diode to mix with the received terahertz signal to provide an intermediate frequency output signal. The fully integrated transceiver optimizes power efficiency, sensitivity, compactness, and reliability. The transceiver can be used in compact, fieldable systems covering a wide variety of deployable applications not possible with existing technology.

  12. Integrity at CERN

    E-Print Network [OSTI]

    Department, HR

    2015-01-01

    In the fulfillment of its mission, CERN relies upon the trust and material support of its Member States and partners, and is committed to exercising exemplary stewardship of the resources with which it is entrusted. Accordingly, CERN expects the highest level of integrity from all its contributors (whether members of the personnel, consultants, contractors working on site, or persons engaged in any other capacity at or on behalf of CERN). Integrity is a core value of CERN, defined in the Code of Conduct as “behaving ethically, with intellectual honesty and being accountable for one’s own actions”.

  13. Integrating Program Component Executables

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverseIMPACT EVALUATION PLANIs gravity aOverviewISM IntegratedIntegrating Program

  14. Application and Integration

    E-Print Network [OSTI]

    Science Application and Integration Program Spatial Variability of Wildland Fuel Wildland fuel fuel characteristics for dry forest and shrub ecosystems of the Mountain "Knowledge wildland fuel could revolutionize fire --Bob Keane We've always know What's different now? Although we've always known that fuels

  15. Bioluminescent bioreporter integrated circuit

    DOE Patents [OSTI]

    Simpson, Michael L. (Knoxville, TN); Sayler, Gary S. (Blaine, TN); Paulus, Michael J. (Knoxville, TN)

    2000-01-01

    Disclosed are monolithic bioelectronic devices comprising a bioreporter and an OASIC. These bioluminescent bioreporter integrated circuit are useful in detecting substances such as pollutants, explosives, and heavy-metals residing in inhospitable areas such as groundwater, industrial process vessels, and battlefields. Also disclosed are methods and apparatus for environmental pollutant detection, oil exploration, drug discovery, industrial process control, and hazardous chemical monitoring.

  16. INTEGRAL and Magnetars

    E-Print Network [OSTI]

    D. Gotz; S. Mereghetti; K. Hurley; I. F. Mirabel; P. Esposito; A. Tiengo; G. Weidenspointner; A. von Kienlin

    2007-02-07

    Thanks to INTEGRAL's long exposures of the Galactic Plane, the two brightest Soft Gamma-Ray Repeaters, SGR 1806-20 and SGR 1900+14, have been monitored and studied in detail for the first time at hard-X/soft-gamma rays. SGR 1806-20, lying close to the Galactic Centre, and being very active in the past two years, has provided a wealth of new INTEGRAL results, which we will summarise here: more than 300 short bursts have been observed from this source and their characteristics have been studied with unprecedented sensitivity in the 15-200 keV range. A hardness-intensity anticorrelation within the bursts has been discovered and the overall Number-Intensity distribution of the bursts has been determined. The increase of its bursting activity eventually led to the December 2004 Giant Flare for which a possible soft gamma-ray (>80 keV) early afterglow has been detected with INTEGRAL. The deep observations allowed us to discover the persistent emission in hard X-rays (20-150 keV) from 1806-20 and 1900+14, the latter being in quiescent state, and to directly compare the spectral characteristics of all Magnetars (two SGRs and three Anomalous X-ray Pulsars) detected with INTEGRAL.

  17. Reliable Energy Integration of

    E-Print Network [OSTI]

    Zeng, Ning

    Engineering SustainabilityWorkshop #12;Cost of EnergyTrends Engineering SustainabilityWorkshop #12;Why GoReliable Energy Integration of Offshore Wind Aris Christou University of Maryland College Park MD Access is Difficult, and Costly: Require Minimum Maintenance and High Reliability Engineering

  18. Integrated Safety Management

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2011-04-25

    The order ensures that DOE/NNSA, systematically integrates safety into management and work practices at all levels, so that missions are accomplished efficiently while protecting the workers, the public, and the environment. Supersedes DOE M 450.4-1 and DOE M 411.1-1C

  19. Integrated Safety Management Policy

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2011-04-25

    The policy establishes DOE's expectation for safety, including integrated safety management that will enable the Department’s mission goals to be accomplished efficiently while ensuring safe operations at all departmental facilities and activities. Supersedes DOE P 450.4, DOE P 411.1, DOE P 441.1, DOE P 450.2A, and DOE P 450.7

  20. Modular Integrated Energy Systems

    E-Print Network [OSTI]

    Oak Ridge National Laboratory

    recovery steam generator, and a waste heat fired absorption chiller. The key goals of the project are a large number of barracks and other buildings with steam for heating and domestic hot water, and chilled of Honeywell's data collection activity for the integrated energy system (or CHP -- Cooling, Heat and Power

  1. Integrated turbomachine oxygen plant

    SciTech Connect (OSTI)

    Anand, Ashok Kumar; DePuy, Richard Anthony; Muthaiah, Veerappan

    2014-06-17

    An integrated turbomachine oxygen plant includes a turbomachine and an air separation unit. One or more compressor pathways flow compressed air from a compressor through one or more of a combustor and a turbine expander to cool the combustor and/or the turbine expander. An air separation unit is operably connected to the one or more compressor pathways and is configured to separate the compressed air into oxygen and oxygen-depleted air. A method of air separation in an integrated turbomachine oxygen plant includes compressing a flow of air in a compressor of a turbomachine. The compressed flow of air is flowed through one or more of a combustor and a turbine expander of the turbomachine to cool the combustor and/or the turbine expander. The compressed flow of air is directed to an air separation unit and is separated into oxygen and oxygen-depleted air.

  2. Chapter 7: Integration and Packaging Page 127 Integration and Packaging

    E-Print Network [OSTI]

    Wilson, Denise

    Chapter 7: Integration and Packaging Page 127 Chapter 7 Integration and Packaging The collective in semiconductor fabrication processes. · Packaging: integrated circuits need to be protected from potentially of the feasibility of complete chemical microsystems. The issue of packaging for operating in unfriendly sensing

  3. Integrated Deployment and the Energy Systems Integration Facility: Workshop Proceedings

    SciTech Connect (OSTI)

    Kroposki, B.; Werner, M.; Spikes, A.; Komomua, C.

    2013-01-01

    This report summarizes the workshop entitled: Integrated Deployment and the Energy Systems Integration Facility. In anticipation of the opening of the ESIF, NREL held the workshop August 21-23, 2012 and invited participants from utilities, government, industry, and academia to discuss renewable integration challenges and discover new ways to meet them by taking advantage of the ESIF's capabilities.

  4. Integrated Architectural Concepts 

    E-Print Network [OSTI]

    Schossig, E.

    2008-01-01

    and questions on sustainability and the optimisation of resources, leading to the development of an intelligent and economised, architectural solution amid the border area between architecture and technology, is of great importance to Elmar Schossig?s... Richartzstrasse 10 50667 Cologne 00 49 22 1/ 92 58 21 - 0 info@gatermann-schossig.de Integrated Architectural Concepts Next to the aesthetic and functional aspects, an ecological approach which also pays great attention to energetical concerns...

  5. Integrated Safety Management Policy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on DeliciousMathematicsEnergy HeadquartersFuelBConservationEnergy5975-01 REPORTDepartment ofINTEGRATED SAFETY

  6. Integrated structural health monitoring.

    SciTech Connect (OSTI)

    Farrar, C. R. (Charles R.)

    2001-01-01

    Structural health monitoring is the implementation of a damage detection strategy for aerospace, civil and mechanical engineering infrastructure. Typical damage experienced by this infrastructure might be the development of fatigue cracks, degradation of structural connections, or bearing wear in rotating machinery. The goal of the research effort reported herein is to develop a robust and cost-effective structural health monitoring solution by integrating and extending technologies from various engineering and information technology disciplines. It is the authors opinion that all structural health monitoring systems must be application specific. Therefore, a specific application, monitoring welded moment resisting steel frame connections in structures subjected to seismic excitation, is described along with the motivation for choosing this application. The structural health monitoring solution for this application will integrate structural dynamics, wireless data acquisition, local actuation, micro-electromechanical systems (MEMS) technology, and statistical pattern recognition algorithms. The proposed system is based on an assessment of the deficiencies associated with many current structural health monitoring technologies including past efforts by the authors. This paper provides an example of the integrated approach to structural health monitoring being undertaken at Los Alamos National Laboratory and summarizes progress to date on various aspects of the technology development.

  7. Integrative Bioengineering Institute

    SciTech Connect (OSTI)

    Eddington, David; Magin,L,Richard; Hetling, John; Cho, Michael

    2009-01-09

    Microfabrication enables many exciting experimental possibilities for medicine and biology that are not attainable through traditional methods. However, in order for microfabricated devices to have an impact they must not only provide a robust solution to a current unmet need, but also be simple enough to seamlessly integrate into standard protocols. Broad dissemination of bioMEMS has been stymied by the common aim of replacing established and well accepted protocols with equally or more complex devices, methods, or materials. The marriage of a complex, difficult to fabricate bioMEMS device with a highly variable biological system is rarely successful. Instead, the design philosophy of my lab aims to leverage a beneficial microscale phenomena (e.g. fast diffusion at the microscale) within a bioMEMS device and adapt to established methods (e.g. multiwell plate cell culture) and demonstrate a new paradigm for the field (adapt instead of replace). In order for the field of bioMEMS to mature beyond novel proof-of-concept demonstrations, researchers must focus on developing systems leveraging these phenomena and integrating into standard labs, which have largely been ignored. Towards this aim, the Integrative Bioengineering Institute has been established.

  8. High Efficiency Integrated Package

    SciTech Connect (OSTI)

    Ibbetson, James

    2013-09-15

    Solid-state lighting based on LEDs has emerged as a superior alternative to inefficient conventional lighting, particularly incandescent. LED lighting can lead to 80 percent energy savings; can last 50,000 hours – 2-50 times longer than most bulbs; and contains no toxic lead or mercury. However, to enable mass adoption, particularly at the consumer level, the cost of LED luminaires must be reduced by an order of magnitude while achieving superior efficiency, light quality and lifetime. To become viable, energy-efficient replacement solutions must deliver system efficacies of ? 100 lumens per watt (LPW) with excellent color rendering (CRI > 85) at a cost that enables payback cycles of two years or less for commercial applications. This development will enable significant site energy savings as it targets commercial and retail lighting applications that are most sensitive to the lifetime operating costs with their extended operating hours per day. If costs are reduced substantially, dramatic energy savings can be realized by replacing incandescent lighting in the residential market as well. In light of these challenges, Cree proposed to develop a multi-chip integrated LED package with an output of > 1000 lumens of warm white light operating at an efficacy of at least 128 LPW with a CRI > 85. This product will serve as the light engine for replacement lamps and luminaires. At the end of the proposed program, this integrated package was to be used in a proof-of-concept lamp prototype to demonstrate the component’s viability in a common form factor. During this project Cree SBTC developed an efficient, compact warm-white LED package with an integrated remote color down-converter. Via a combination of intensive optical, electrical, and thermal optimization, a package design was obtained that met nearly all project goals. This package emitted 1295 lm under instant-on, room-temperature testing conditions, with an efficacy of 128.4 lm/W at a color temperature of ~2873K and 83 CRI. As such, the package’s performance exceeds DOE’s warm-white phosphor LED efficacy target for 2013. At the end of the program, we assembled an A19 sized demonstration bulb housing the integrated package which met Energy Star intensity variation requirements. With further development to reduce overall component cost, we anticipate that an integrated remote converter package such as developed during this program will find application in compact, high-efficacy LED-based lamps, particularly those requiring omnidirectional emission.

  9. Algorithm FIRE -- Feynman Integral REduction

    E-Print Network [OSTI]

    A. V. Smirnov

    2008-08-02

    The recently developed algorithm FIRE performs the reduction of Feynman integrals to master integrals. It is based on a number of strategies, such as applying the Laporta algorithm, the s-bases algorithm, region-bases and integrating explicitly over loop momenta when possible. Currently it is being used in complicated three-loop calculations.

  10. Path Integral for Quantum Operations

    E-Print Network [OSTI]

    Vasily E. Tarasov

    2007-06-14

    In this paper we consider a phase space path integral for general time-dependent quantum operations, not necessarily unitary. We obtain the path integral for a completely positive quantum operation satisfied Lindblad equation (quantum Markovian master equation). We consider the path integral for quantum operation with a simple infinitesimal generator.

  11. Completeness of Integrated Information Sources

    E-Print Network [OSTI]

    Freytag, Johann-Christoph

    Completeness of Integrated Information Sources Felix Naumann, Johann-Christoph Freytag, Ulf Leser attributes of these entities. Mediator-based information systems allow integrated access to such sources new merge operators, which formalize the integration of multiple source responses. A completeness

  12. Lectures on integrable Hamiltonian systems

    E-Print Network [OSTI]

    G. Sardanashvily

    2013-03-21

    We consider integrable Hamiltonian systems in a general setting of invariant submanifolds which need not be compact. For instance, this is the case a global Kepler system, non-autonomous integrable Hamiltonian systems and integrable systems with time-dependent parameters.

  13. Fourier transforms of UD integrals

    E-Print Network [OSTI]

    Igor Kondrashuk; Anatoly Kotikov

    2008-02-23

    UD integrals published by N. Usyukina and A. Davydychev in 1992-1993 are integrals corresponding to ladder-type Feynman diagrams. The results are UD functions $\\Phi^{(L)},$ where $L$ is the number of loops. They play an important role in N=4 supersymmetic Yang-Mills theory. The integrals were defined and calculated in the momentum space. In this paper the position space representation of UD functions is investigated. We show that Fourier transforms of UD functions are UD functions of space-time intervals but this correspondence is indirect. For example, the Fourier transform of the second UD integral is the second UD integral.

  14. Integrating Safety into Design and Construction | Department...

    Office of Environmental Management (EM)

    Integrating Safety into Design and Construction Integrating Safety into Design and Construction DepSecMemoIntegratingSafetyInDesignAndConstruction05Dec2005.pdf More Documents &...

  15. Iterated integrals of superconnections

    E-Print Network [OSTI]

    Igusa, Kiyoshi

    2009-01-01

    Starting with a Z-graded superconnection on a graded vector bundle over a smooth manifold M, we show how Chen's iterated integration of such a superconnection over smooth simplices in M gives an A-infinity functor if and only if the superconnection is flat. If the graded bundle is trivial, this gives a twisting cochain. Very similar results were obtained by K.T. Chen using similar methods. This paper is intended to explain this from scratch beginning with the definition and basic properties of a connection and ending with an exposition of Chen's "formal connections" and a brief discussion of how this is related to higher Reidemeister torsion.

  16. Integrating the Jacobian equation

    E-Print Network [OSTI]

    Airton von Sohsten de Medeiros; Ráderson Rodrigues da Silva

    2014-09-16

    We show essentially that the differential equation $\\frac{\\partial (P,Q)}{\\partial (x,y)} =c \\in {\\mathbb C}$, for $P,\\,Q \\in {\\mathbb C}[x,y]$, may be "integrated", in the sense that it is equivalent to an algebraic system of equations involving the homogeneous components of $P$ and $Q$. Furthermore, the first equations in this system give explicitly the homogeneous components of $Q$ in terms of those of $P$. The remaining equations involve only the homogeneous components of $P$.

  17. Integrated optical XY coupler

    DOE Patents [OSTI]

    Vawter, G. Allen (Albuquerque, NM); Hadley, G. Ronald (Albuquerque, NM)

    1997-01-01

    An integrated optical XY coupler having two converging input waveguide arms meeting in a central section and a central output waveguide arm and two diverging flanking output waveguide arms emanating from the central section. In-phase light from the input arms constructively interfers in the central section to produce a single mode output in the central output arm with the rest of the light being collected in the flanking output arms. Crosstalk between devices on a substrate is minimized by this collection of the out-of-phase light by the flanking output arms of the XY coupler.

  18. Integrated Assessment Modeling

    SciTech Connect (OSTI)

    Edmonds, James A.; Calvin, Katherine V.; Clarke, Leon E.; Janetos, Anthony C.; Kim, Son H.; Wise, Marshall A.; McJeon, Haewon C.

    2012-10-31

    This paper discusses the role of Integrated Assessment models (IAMs) in climate change research. IAMs are an interdisciplinary research platform, which constitutes a consistent scientific framework in which the large-scale interactions between human and natural Earth systems can be examined. In so doing, IAMs provide insights that would otherwise be unavailable from traditional single-discipline research. By providing a broader view of the issue, IAMs constitute an important tool for decision support. IAMs are also a home of human Earth system research and provide natural Earth system scientists information about the nature of human intervention in global biogeophysical and geochemical processes.

  19. Integrating Environmental Stewardship

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverseIMPACT EVALUATION PLANIs gravity aOverviewISM Integrated

  20. Sandia Energy - Grid Integration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservation of Fe(II)Geothermal Energy & Drilling Technology HomeGrid CyberGrid Integration

  1. Integrating preconcentrator heat controller

    DOE Patents [OSTI]

    Bouchier, Francis A. (Albuquerque, NM); Arakaki, Lester H. (Edgewood, NM); Varley, Eric S. (Albuquerque, NM)

    2007-10-16

    A method and apparatus for controlling the electric resistance heating of a metallic chemical preconcentrator screen, for example, used in portable trace explosives detectors. The length of the heating time-period is automatically adjusted to compensate for any changes in the voltage driving the heating current across the screen, for example, due to gradual discharge or aging of a battery. The total deposited energy in the screen is proportional to the integral over time of the square of the voltage drop across the screen. Since the net temperature rise, .DELTA.T.sub.s, of the screen, from beginning to end of the heating pulse, is proportional to the total amount of heat energy deposited in the screen during the heating pulse, then this integral can be calculated in real-time and used to terminate the heating current when a pre-set target value has been reached; thereby providing a consistent and reliable screen temperature rise, .DELTA.T.sub.s, from pulse-to-pulse.

  2. ON THE C-INTEGRAL BENEDETTO BONGIORNO

    E-Print Network [OSTI]

    Talvila, Erik

    ON THE C-INTEGRAL BENEDETTO BONGIORNO Let F with an integration process (called totalization) that includes the Lebesgue integral and the Riemann improper integral. Two years later, a second solution was obtained by O. Perron with a method based

  3. Feasibility of Geophysical Monitoring of Carbon-Sequestrated Deep Saline Aquifers

    SciTech Connect (OSTI)

    Mallick, Subhashis; Alvarado, Vladimir

    2013-09-30

    As carbon dioxide (CO{sub 2}) is sequestered from the bottom of a brine reservoir and allowed to migrate upward, the effects of the relative permeability hysteresis due to capillary trapping and buoyancy driven migration tend to make the reservoir patchy saturated with different fluid phases over time. Seismically, such a patchy saturated reservoir induces an effective anisotropic behavior whose properties are primarily dictated by the nature of the saturation of different fluid phases in the pores and the elastic properties of the rock matrix. By combining reservoir flow simulation and modeling with seismic modeling, it is possible to derive these effective anisotropic properties, which, in turn, could be related to the saturation of CO{sub 2} within the reservoir volume any time during the post-injection scenario. Therefore, if time-lapse seismic data are available and could be inverted for the effective anisotropic properties of the reservoir, they, in combination with reservoir simulation could potentially predict the CO{sub 2} saturation directly from the time-lapse seismic data. It is therefore concluded that the time-lapse seismic data could be used to monitor the carbon sequestrated saline reservoirs. But for its successful implementation, seismic modeling and inversion methods must be integrated with the reservoir simulations. In addition, because CO{sub 2} sequestration induces an effective anisotropy in the sequestered reservoir and anisotropy is best detected using multicomponent seismic data compared to single component (P-wave) data, acquisition, processing, and analysis is multicomponent seismic data is recommended for these time-lapse studies. Finally, a successful implementation of using time-lapse seismic data for monitoring the carbon sequestrated saline reservoirs will require development of a robust methodology for inverting multicomponent seismic data for subsurface anisotropic properties.

  4. National Renewable Energy Laboratory's Energy Systems Integration...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    National Renewable Energy Laboratory's Energy Systems Integration Facility Overview National Renewable Energy Laboratory's Energy Systems Integration Facility Overview This...

  5. Supertruck - Improving Transportation Efficiency through Integrated...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Improving Transportation Efficiency through Integrated Vehicle, Engine and Powertrain Research Supertruck - Improving Transportation Efficiency through Integrated Vehicle, Engine...

  6. Transportation and Stationary Power Integration Workshop Session...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Transportation and Stationary Power Integration Workshop Agenda, October 27, 2008, Phoenix, Arizonia Transportation and Stationary Power Integration: Workshop Proceedings...

  7. Integral Geometry and Holography

    E-Print Network [OSTI]

    Czech, Bartlomiej; McCandlish, Samuel; Sully, James

    2015-01-01

    We present a mathematical framework which underlies the connection between information theory and the bulk spacetime in the AdS$_3$/CFT$_2$ correspondence. A key concept is kinematic space: an auxiliary Lorentzian geometry whose metric is defined in terms of conditional mutual informations and which organizes the entanglement pattern of a CFT state. When the field theory has a holographic dual obeying the Ryu-Takayanagi proposal, kinematic space has a direct geometric meaning: it is the space of bulk geodesics studied in integral geometry. Lengths of bulk curves are computed by kinematic volumes, giving a precise entropic interpretation of the length of any bulk curve. We explain how basic geometric concepts -- points, distances and angles -- are reflected in kinematic space, allowing one to reconstruct a large class of spatial bulk geometries from boundary entanglement entropies. In this way, kinematic space translates between information theoretic and geometric descriptions of a CFT state. As an example, we...

  8. Integrated optical sensor

    DOE Patents [OSTI]

    Watkins, Arthur D. (Idaho Falls, ID); Smartt, Herschel B. (Idaho Falls, ID); Taylor, Paul L. (Idaho Falls, ID)

    1994-01-01

    An integrated optical sensor for arc welding having multifunction feedback control. The sensor, comprising generally a CCD camera and diode laser, is positioned behind the arc torch for measuring weld pool position and width, standoff distance, and post-weld centerline cooling rate. Computer process information from this sensor is passed to a controlling computer for use in feedback control loops to aid in the control of the welding process. Weld pool position and width are used in a feedback loop, by the weld controller, to track the weld pool relative to the weld joint. Sensor standoff distance is used in a feedback loop to control the contact tip to base metal distance during the welding process. Cooling rate information is used to determine the final metallurgical state of the weld bead and heat affected zone, thereby controlling post-weld mechanical properties.

  9. Integrated optical sensor

    DOE Patents [OSTI]

    Watkins, A.D.; Smartt, H.B.; Taylor, P.L.

    1994-01-04

    An integrated optical sensor for arc welding having multifunction feedback control is described. The sensor, comprising generally a CCD camera and diode laser, is positioned behind the arc torch for measuring weld pool position and width, standoff distance, and post-weld centerline cooling rate. Computer process information from this sensor is passed to a controlling computer for use in feedback control loops to aid in the control of the welding process. Weld pool position and width are used in a feedback loop, by the weld controller, to track the weld pool relative to the weld joint. Sensor standoff distance is used in a feedback loop to control the contact tip to base metal distance during the welding process. Cooling rate information is used to determine the final metallurgical state of the weld bead and heat affected zone, thereby controlling post-weld mechanical properties. 6 figures.

  10. Integrated heat pump system

    SciTech Connect (OSTI)

    Reedy, W.R.

    1988-03-01

    An integrated heat pump and hot water system is described that includes: a heat pump having an indoor heat exchanger and an outdoor heat exchanger that are selectively connected to the suction line and the discharge line respectively of a compressor by a flow reversing means, and to each other by a liquid line having an expansion device mounted therein, whereby heating and cooling is provided to an indoor comfort zone by cycling the flow reversing means, a refrigerant to water heat exchanger having a hot water flow circuit in heat transfer relation with a first refrigerant condensing circuit and a second refrigerant evaporating circuit, a connection mounted in the liquid between the indoor heat exchanger and the expansion device, control means for regulating the flow of refrigerant through the refrigerant to water heat exchanger to selectively transfer heat into and out of the hot water flow circuit.

  11. Wet storage integrity update

    SciTech Connect (OSTI)

    Bailey, W.J.; Johnson, A.B. Jr.

    1983-09-01

    This report includes information from various studies performed under the Wet Storage Task of the Spent Fuel Integrity Project of the Commercial Spent Fuel Management (CSFM) Program at Pacific Northwest Laboratory. An overview of recent developments in the technology of wet storage of spent water reactor fuel is presented. Licensee Event Reports pertaining to spent fuel pools and the associated performance of spent fuel and storage components during wet storage are discussed. The current status of fuel that was examined under the CSFM Program is described. Assessments of the effect of boric acid in spent fuel pool water on the corrosion and stress corrosion cracking of stainless steel and the stress corrosion cracking of stainless steel piping containing stagnant water at spent fuel pools are discussed. A list of pertinent publications is included. 84 references, 21 figures, 11 tables.

  12. Nucleosynthesis results from INTEGRAL

    E-Print Network [OSTI]

    G. Weidenspointner

    2006-01-15

    Since its launch in October 2002, ESA's INTEGRAL observatory has enabled significant advances to be made in the study of Galactic nucleosynthesis. In particular, the imaging Ge spectrometer SPI combines for the first time the diagnostic powers of high resolution gamma-ray line spectroscopy and moderate spatial resolution. This review summarizes the major nucleosynthesis results obtained with INTEGRAL so far. Positron annihilation in our Galaxy is being studied in unprecented detail. SPI observations yield the first sky maps in both the 511 keV annihilation line and the positronium continuum emission, and the most accurate spectrum at 511 keV to date, thereby imposing new constraints on the source(s) of Galactic positrons which still remain(s) unidentified. For the first time, the imprint of Galactic rotation on the centroid and shape of the 1809 keV gamma-ray line due to the decay of 26Al has been seen, confirming the Galactic origin of this emission. SPI also provided the most accurate determination of the gamma-ray line flux due to the decay of 60Fe. The combined results for 26Al and 60Fe have important implications for nucleosynthesis in massive stars, in particular Wolf-Rayet stars. Both IBIS and SPI are searching the Galactic plane for young supernova remnants emitting the gamma-ray lines associated with radioactive 44Ti. None have been found so far, which raises important questions concerning the production of 44Ti in supernovae, the Galactic supernova rate, and the Galaxy's chemical evolution.

  13. HLW System Integrated Project Team

    Office of Environmental Management (EM)

    Team Integrated Project Team Steve Schneider Steve Schneider Office of Engineering and Technology High Level Waste Corporate Board March 5, 2009 This document is intended for...

  14. Research Integrity | ornl.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    About ORNL Fact Sheet Brochure Diversity Leadership Team Organization History Honors and Awards Environmental Policy Environmental Aspects Corporate Giving Research Integrity Who...

  15. Data Integration using Web Services

    E-Print Network [OSTI]

    Hansen, Mark

    2003-02-10

    In this paper we examine the opportunities for data integration in the context of the emerging Web Services systems development paradigm. The paper introduces the ...

  16. Integrative Biosurveillance at Bio Symposium

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Biosurveillance Symposium sponsored by Oak Ridge National Laboratory June 12 in Baltimore. - 2 - Biosurveillance requires the integration of complex data from a variety of...

  17. Fuel Pathways Integration Tech Team

    Office of Energy Efficiency and Renewable Energy (EERE)

    Presentation on Fuel Pathways Integration Tech Team to the DOE Systems Analysis Workshop held in Washington, D.C. July 28-29, 2004.

  18. Tank Integrity Reports - Hanford Site

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Documents > Tank Integrity Reports Documents DOE - RL ContractsProcurements DOE-ORP ContractsProcurements CERCLA Five-Year Review Hanford Site Safety Standards NEPA - Categorical...

  19. Advanced Integrated Electric Traction System

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Integrated Electric Traction System Greg S. Smith Email: gregory.3.smith@gm.com Phone: (310) 257-3812 Organization: General Motors Team members: Ames Laboratory Arnold Magnetics...

  20. Integrated Energy System Dispatch Optimization

    E-Print Network [OSTI]

    Firestone, Ryan; Stadler, Michael; Marnay, Chris

    2006-01-01

    Efficiency and Renewable Energy, Distributed Energy ProgramDistributed Energy Neural Network Integration System: Year One Final Report,” National Renewable Energy

  1. OPTIMAL OPERATION OF INTEGRATED PROCESSES

    E-Print Network [OSTI]

    Skogestad, Sigurd

    OPTIMAL OPERATION OF INTEGRATED PROCESSES Studies on Heat Recovery Systems by Bjørn Glemmestad exchanger network (HEN) for heat recovery. Within the process engineering community, much attention has been

  2. Advanced Integrated Traction System

    SciTech Connect (OSTI)

    Greg Smith; Charles Gough

    2011-08-31

    The United States Department of Energy elaborates the compelling need for a commercialized competitively priced electric traction drive system to proliferate the acceptance of HEVs, PHEVs, and FCVs in the market. The desired end result is a technically and commercially verified integrated ETS (Electric Traction System) product design that can be manufactured and distributed through a broad network of competitive suppliers to all auto manufacturers. The objectives of this FCVT program are to develop advanced technologies for an integrated ETS capable of 55kW peak power for 18 seconds and 30kW of continuous power. Additionally, to accommodate a variety of automotive platforms the ETS design should be scalable to 120kW peak power for 18 seconds and 65kW of continuous power. The ETS (exclusive of the DC/DC Converter) is to cost no more than $660 (55kW at $12/kW) to produce in quantities of 100,000 units per year, should have a total weight less than 46kg, and have a volume less than 16 liters. The cost target for the optional Bi-Directional DC/DC Converter is $375. The goal is to achieve these targets with the use of engine coolant at a nominal temperature of 105C. The system efficiency should exceed 90% at 20% of rated torque over 10% to 100% of maximum speed. The nominal operating system voltage is to be 325V, with consideration for higher voltages. This project investigated a wide range of technologies, including ETS topologies, components, and interconnects. Each technology and its validity for automotive use were verified and then these technologies were integrated into a high temperature ETS design that would support a wide variety of applications (fuel cell, hybrids, electrics, and plug-ins). This ETS met all the DOE 2010 objectives of cost, weight, volume and efficiency, and the specific power and power density 2015 objectives. Additionally a bi-directional converter was developed that provides charging and electric power take-off which is the first step towards enabling a smart-grid application. GM under this work assessed 29 technologies; investigated 36 configurations/types power electronics and electric machines, filed 41 invention disclosures; and ensured technology compatibility with vehicle production. Besides the development of a high temperature ETS the development of industrial suppliers took place because of this project. Suppliers of industrial power electronic components are numerous, but there are few that have traction drive knowledge. This makes it difficult to achieve component reliability, durability, and cost requirements necessary of high volume automotive production. The commercialization of electric traction systems for automotive industry requires a strong diverse supplier base. Developing this supplier base is dependent on a close working relationship between the OEM and supplier so that appropriate component requirements can be developed. GM has worked closely with suppliers to develop components for electric traction systems. Components that have been the focus of this project are power modules, capacitors, heavy copper boards, current sensors, and gate drive and controller chip sets. Working with suppliers, detailed component specifications have been developed. Current, voltage, and operation environment during the vehicle drive cycle were evaluated to develop higher resolution/accurate component specifications.

  3. Frobenius manifolds and algebraic integrability

    E-Print Network [OSTI]

    L. K. Hoevenaars

    2007-06-26

    We give a short review of Frobenius manifolds and algebraic integrability and study their intersection. The simplest case is the relation between the Frobenius manifold of simple singularities, which is almost dual to the integrable open Toda chain. New types of manifolds called extra special Kaehler and special F-manifolds are introduced which capture the intersection.

  4. Energy Systems Integration Facility Overview

    ScienceCinema (OSTI)

    Arvizu, Dan; Chistensen, Dana; Hannegan, Bryan; Garret, Bobi; Kroposki, Ben; Symko-Davies, Martha; Post, David; Hammond, Steve; Kutscher, Chuck; Wipke, Keith

    2014-06-10

    The U.S. Department of Energy's Energy Systems Integration Facility (ESIF) is located at the National Renewable Energy Laboratory is the right tool, at the right time... a first-of-its-kind facility that addresses the challenges of large-scale integration of clean energy technologies into the energy systems that power the nation.

  5. Information and integrity in the

    E-Print Network [OSTI]

    De Montfort University

    Information and integrity in the information age Converging technologies have changed the way we should look at information. Traditional paradigms of information suppliers and consumers no longer seem of information and its associated integrity using illustrations from the virtual world Converging technologies

  6. Communication Needs and Integration Options

    E-Print Network [OSTI]

    Communication Needs and Integration Options for AMI in the Smart Grid Future Grid Initiative White System #12;Communication Needs and Integration Options for AMI in the Smart Grid Prepared for the Project the current state of communications for the advanced metering infrastructure (AMI) and recommends

  7. Energy Systems Integration Facility Overview

    SciTech Connect (OSTI)

    Arvizu, Dan; Chistensen, Dana; Hannegan, Bryan; Garret, Bobi; Kroposki, Ben; Symko-Davies, Martha; Post, David; Hammond, Steve; Kutscher, Chuck; Wipke, Keith

    2014-02-28

    The U.S. Department of Energy's Energy Systems Integration Facility (ESIF) is located at the National Renewable Energy Laboratory is the right tool, at the right time... a first-of-its-kind facility that addresses the challenges of large-scale integration of clean energy technologies into the energy systems that power the nation.

  8. Journal club Multivariate Signal integration

    E-Print Network [OSTI]

    Journal club Multivariate Signal integration A fundamental aspect of biological systems is that they are multivariate: cells receive, integrate and respond to hundreds or thousands of concurrent environmental cues in the context of the cell's multivariate network state. Because this depends on cues in the environment

  9. Challenges in Integrating Renewable Technologies

    E-Print Network [OSTI]

    costs and improving energy efficiencies of the various types of renewable resources, such as wind, solar reliability and econ- omy. The challenges of integrating high penetrations of renewable energy technologiesChallenges in Integrating Renewable Technologies into an Electric Power System White Paper Power

  10. Topsoe integrated gasoline synthesis (TIGAS)

    SciTech Connect (OSTI)

    Hansen, H.K.; Joensen, F.

    1987-01-01

    Integration of Haldor Topsoe's oxygenate (MeOH, DME) synthesis and the MTG process into one single synthesis loop provides a new low investment route to gasoline from natural gas. The integrated process has been demonstrated in an industrial pilot with a capacity of 1 MTPD gasoline since 1984. The pilot has operated successfully for more than 10,000 hours.

  11. Defining integrals over connections in the discretized gravitational functional integral

    E-Print Network [OSTI]

    V. M. Khatsymovsky

    2010-05-01

    Integration over connection type variables in the path integral for the discrete form of the first order formulation of general relativity theory is studied. The result (a generalized function of the rest of variables of the type of tetrad or elementary areas) can be defined through its moments, i. e. integrals of it with the area tensor monomials. In our previous paper these moments have been defined by deforming integration contours in the complex plane as if we had passed to an Euclidean-like region. In the present paper we define and evaluate the moments in the genuine Minkowsky region. The distribution of interest resulting from these moments in this non-positively defined region contains the divergences. We prove that the latter contribute only to the singular (\\dfun like) part of this distribution with support in the non-physical region of the complex plane of area tensors while in the physical region this distribution (usual function) confirms that defined in our previous paper which decays exponentially at large areas. Besides that, we evaluate the basic integrals over which the integral over connections in the general path integral can be expanded.

  12. A Grassmann integral equation K. Scharnhorst a)

    E-Print Network [OSTI]

    Scharnhorst, Klaus

    A Grassmann integral equation K. Scharnhorst a) Humboldt­Universita Ë? t zu Berlin, Institut fu Ë? r Grassmann integral equation in analogy to integral equations studied in real analysis. A Grassmann integral equation is an equation which involves Grassmann #Berezin# integrations and which is to be obeyed

  13. A Grassmann integral equation K. Scharnhorsta)

    E-Print Network [OSTI]

    Scharnhorst, Klaus

    A Grassmann integral equation K. Scharnhorsta) Humboldt-Universita¨t zu Berlin, Institut fu Grassmann integral equation in analogy to integral equations studied in real analysis. A Grassmann integral equation is an equation which involves Grassmann Berezin integrations and which is to be obeyed

  14. Structural Evaluation by Generalized Integral Property

    E-Print Network [OSTI]

    International Association for Cryptologic Research (IACR)

    Structural Evaluation by Generalized Integral Property Yosuke Todo NTT Secure Platform Laboratories cryptanalyses are distinguishing attacks by an improved integral distinguisher. The integral distinguisher the propagation characteristic of integral properties, e.g., the ALL or BALANCE property. However, the integral

  15. MSc Integrated Petroleum Geoscience Programme Handbook

    E-Print Network [OSTI]

    Neri, Peter

    MSc Integrated Petroleum Geoscience Programme Handbook 2013-14 edition #12;Page 2 Contents Preface 3 1.MSc Integrated Petroleum Geoscience ­ FAQ 4 1.1 Why should I do this programme? 4 1.2 What Integrated Petroleum Geoscience: 57F610B1 PgDip Integrated Petroleum Geoscience: 61F610VX PgCert Integrated

  16. Chinese Magic in Loop Integrals

    E-Print Network [OSTI]

    B. F. L. Ward

    2011-06-02

    We present an approach to higher point loop integrals using Chinese magic in the virtual loop integration variable. We show, using the five point function in the important e^+e^-\\to f\\bar{f}+\\gamma process for ISR as a pedagogical vehicle, that we get an expression for it directly reduced to one scalar 5-point function and 4-, 3-, and 2- point integrals, thereby avoiding the computation of the usual three tensor 5-pt Passarino-Veltman reduction. We argue that this offers potential for greater numerical stability.

  17. A Universal Magnetic Helicity Integral

    E-Print Network [OSTI]

    Gunnar Hornig

    2006-06-28

    A magnetic helicity integral is proposed which can be applied to domains which are not magnetically closed, i.e. have a non-vanishing normal component of the magnetic field on the boundary. In contrast to the relative helicity integral, which was previously suggested for magnetically open domains, it does not rely on a reference field and thus avoids all problems related to the choice of a particular reference field. Instead it uses a gauge condition on the vector potential, which corresponds to a particular topologically unique closure of the magnetic field in the external space. The integral has additional elegant properties and is easy to compute numerically in practice. For magnetically closed domains it reduces to the classical helicity integral.

  18. Optical waveguides for microfluidic integration

    E-Print Network [OSTI]

    Ram, Rajeev J.

    A scalable polymer backplane for dense integration of photonics with lab-on-a-chip systems is presented. A high-throughput cell culture chip employing waveguides for monitoring and control of culture conditions is used to ...

  19. BPA Wind Integration Team Update

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    BPA Wind Integration Team Update Customer Supplied Generation Imbalance (CSGI) Pilot Transmission Services Customer Forum 29 July 28, 2010 B O N N E V I L L E P O W E R A D M I N...

  20. Demonstration of integrated optimization software

    SciTech Connect (OSTI)

    NONE

    2008-01-01

    NeuCO has designed and demonstrated the integration of five system control modules using its proprietary ProcessLink{reg_sign} technology of neural networks, advanced algorithms and fuzzy logic to maximize performance of coal-fired plants. The separate modules control cyclone combustion, sootblowing, SCR operations, performance and equipment maintenance. ProcessLink{reg_sign} provides overall plant-level integration of controls responsive to plant operator and corporate criteria. Benefits of an integrated approach include NOx reduction improvement in heat rate, availability, efficiency and reliability; extension of SCR catalyst life; and reduced consumption of ammonia. All translate into cost savings. As plant complexity increases through retrofit, repowering or other plant modifications, this integrated process optimization approach will be an important tool for plant operators. 1 fig., 1 photo.

  1. Microfluidic Systems Integrated Microfluidic Systems**

    E-Print Network [OSTI]

    Ismagilov, Rustem F.

    Microfluidic Systems Integrated Microfluidic Systems** Rustem F. Ismagilov* Keywords: analytical methods · enzymes · microfluidics · microreactors · protein structures Microfluidic systems use networks of channels thinner than a human hair to manipulate nanoliter volumes of re- agents. The goal of microfluidics

  2. Integrated Safety Management System Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2006-11-01

    This manual provides requirements and guidance for DOE and contractors to ensure development and implementation of an effective Integrated Safety Management system that is periodically reviewed and continuously improved. Canceled by DOE O 450.2.

  3. Nebraska Statewide Wind Integration Study

    SciTech Connect (OSTI)

    none,

    2010-03-01

    This study of wind energy integration in Nebraska was conducted at the request of the Nebraska Power Association. Executive summary can be found here: http://www.nrel.gov/docs/fy10osti/47285.pdf

  4. Analysis of Integrated Tropical Biorefineries

    E-Print Network [OSTI]

    the integration of an anaerobic digester into each biochemical platform technology. The combustion of biogas not rely on biogas combustion to be thermally self- sufficient. However, their output of excess electricity

  5. A survey of integral ?-helical membrane proteins

    E-Print Network [OSTI]

    2009-01-01

    opti- mum eukaryotic integral membrane proteins forLarge-scale identi?cation of yeast integral membrane protein009-9069-8 A survey of integral a-helical membrane proteins

  6. Higher order integral stark-type conjectures

    E-Print Network [OSTI]

    Emmons, Caleb J.

    2006-01-01

    D . Popescu. Rubin's integral refinement of the abelianS A N DIEGO Higher Order Integral Stark-Type Conjectures ADISSERTATION Higher Order Integral Stark-Type Conjectures by

  7. Elliptic integral evaluations of Bessel moments

    E-Print Network [OSTI]

    Bailey, David H.; Borwein, Jonathan M.; Broadhurst, David; Glasser, M.L.

    2008-01-01

    Bailey, “Some in?nite integrals involving Bessel functions,”Bailey, “Some in?nite integrals involving Bessel functions (G.N. Watson, “Three triple integrals,” Q. J. Math. (Oxford),

  8. The domain of the Fourier integral

    E-Print Network [OSTI]

    V. N. Tibabishev

    2011-02-19

    We consider the problem of determining the Fourier integral in the Hilbert space of square integrable functions. Fourier integral is the scalar product of two functions belonging to the Hilbert space of square integrable functions and the Hilbert space of almost periodic functions. Scalar product for different Hilbert spaces defined at the intersection of these spaces, which contains only one zero element. Therefore, the Fourier integral is not defined in the Hilbert space of square integrable functions with nonzero norm.

  9. Double Integrals: GENERAL REGION The main difficulty in evaluating a double integral

    E-Print Network [OSTI]

    Knopf, Dan

    Double Integrals: GENERAL REGION The main difficulty in evaluating a double integral was being able to compute the single variable integrals that arose because the double integral could written as repeated single variable integrals and either choice of order of integration used. So we could always choose

  10. A Blueprint for Urban Sustainability: Integrating Sustainable...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    A Blueprint for Urban Sustainability: Integrating Sustainable Energy Practices into Metropolitan Planning, May 2004 A Blueprint for Urban Sustainability: Integrating Sustainable...

  11. INTEGRATED SYSTEMS NANOFABRICATION CLEANROOM NEW USER APPLICATION

    E-Print Network [OSTI]

    Jalali. Bahram

    INTEGRATED SYSTEMS NANOFABRICATION CLEANROOM NEW USER APPLICATION interest in using the CNSI Integrated Systems Nanofabrication Cleanroom (ISNC). We ask you to carefully

  12. Developing Integrated National Design Standards for Offshore...

    Energy Savers [EERE]

    Developing Integrated National Design Standards for Offshore Wind Plants Developing Integrated National Design Standards for Offshore Wind Plants January 6, 2014 - 10:00am Addthis...

  13. Power Electronic Thermal System Performance and Integration ...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    May 18-22, 2009 -- Washington D.C. ape13bennion.pdf More Documents & Publications Power Electronic Thermal System Performance and Integration Integrated Power Module...

  14. Integrated Computational Materials Engineering (ICME) for Mg...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    lm012li2011o.pdf More Documents & Publications Integrated Computational Materials Engineering (ICME) for Mg: International Pilot Project Integrated Computational Materials...

  15. Integrated Computational Materials Engineering (ICME) for Mg...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    lm012li2012o.pdf More Documents & Publications Integrated Computational Materials Engineering (ICME) for Mg: International Pilot Project Integrated Computational Materials...

  16. Tank Waste System Integrated Project Team

    Office of Environmental Management (EM)

    to protect human health, the environment and national security are maintained. Tank Waste System Tank Waste System Integrated Project Team Integrated Project Team Steve...

  17. Webinar: Potential Strategies for Integrating Solar Hydrogen...

    Office of Environmental Management (EM)

    Potential Strategies for Integrating Solar Hydrogen Production and Concentrating Solar Power: A Systems Analysis Webinar: Potential Strategies for Integrating Solar Hydrogen...

  18. Opening Remarks, Grid Integration Initiative Overview

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Loads Power Systems Integration Lab PV and Grid Simulators Energy Systems Integration Lab Fuel Cells, Electrolyzers Outdoor Test Area EVs, MV equipment Rooftop PV & Wind Energy...

  19. Integrating Information, Science, and Technology for Prediction

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Integrating Information, Science, and Technology for Prediction Integrating Information, Science, and Technology for Prediction (IS&T) The Lab's four Science Pillars harness...

  20. Economy Through Product Diversity: Integrated Biorefineries ...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Economy Through Product Diversity: Integrated Biorefineries Economy Through Product Diversity: Integrated Biorefineries Achieving national energy and climate goals will require an...

  1. Distributed Energy Systems Integration Group (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2009-10-01

    Factsheet developed to describe the activites of the Distributed Energy Systems Integration Group within NREL's Electricity, Resources, and Buildings Systems Integration center.

  2. Integral Bases for the Universal Enveloping Algebras of Map Algebras

    E-Print Network [OSTI]

    Chamberlin, Samuel Herron

    2011-01-01

    2.2 An Integral Formand Integral Basis . . . . . . . . . . . . .Loop Algebra 2 Integral Bases for the Map Algebras 2.1

  3. MHD Integrated Topping Cycle Project

    SciTech Connect (OSTI)

    Not Available

    1992-03-01

    The Magnetohydrodynamics (MHD) Integrated Topping Cycle (ITC) Project represents the culmination of the proof-of-concept (POC) development stage in the US Department of Energy (DOE) program to advance MHD technology to early commercial development stage utility power applications. The project is a joint effort, combining the skills of three topping cycle component developers: TRW, Avco/TDS, and Westinghouse. TRW, the prime contractor and system integrator, is responsible for the 50 thermal megawatt (50 MW{sub t}) slagging coal combustion subsystem. Avco/TDS is responsible for the MHD channel subsystem (nozzle, channel, diffuser, and power conditioning circuits), and Westinghouse is responsible for the current consolidation subsystem. The ITC Project will advance the state-of-the-art in MHD power systems with the design, construction, and integrated testing of 50 MW{sub t} power train components which are prototypical of the equipment that will be used in an early commercial scale MHD utility retrofit. Long duration testing of the integrated power train at the Component Development and Integration Facility (CDIF) in Butte, Montana will be performed, so that by the early 1990's, an engineering data base on the reliability, availability, maintainability and performance of the system will be available to allow scaleup of the prototypical designs to the next development level. This Sixteenth Quarterly Technical Progress Report covers the period May 1, 1991 to July 31, 1991.

  4. Separations and safeguards model integration.

    SciTech Connect (OSTI)

    Cipiti, Benjamin B.; Zinaman, Owen

    2010-09-01

    Research and development of advanced reprocessing plant designs can greatly benefit from the development of a reprocessing plant model capable of transient solvent extraction chemistry. This type of model can be used to optimize the operations of a plant as well as the designs for safeguards, security, and safety. Previous work has integrated a transient solvent extraction simulation module, based on the Solvent Extraction Process Having Interaction Solutes (SEPHIS) code developed at Oak Ridge National Laboratory, with the Separations and Safeguards Performance Model (SSPM) developed at Sandia National Laboratory, as a first step toward creating a more versatile design and evaluation tool. The goal of this work was to strengthen the integration by linking more variables between the two codes. The results from this integrated model show expected operational performance through plant transients. Additionally, ORIGEN source term files were integrated into the SSPM to provide concentrations, radioactivity, neutron emission rate, and thermal power data for various spent fuels. This data was used to generate measurement blocks that can determine the radioactivity, neutron emission rate, or thermal power of any stream or vessel in the plant model. This work examined how the code could be expanded to integrate other separation steps and benchmark the results to other data. Recommendations for future work will be presented.

  5. CX-011559: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Safeguards in Pyroprocessing: an Integrated Model Development and Measurement Data Analysis CX(s) Applied: B3.6 Date: 11/20/2013 Location(s): Ohio Offices(s): Idaho Operations Office

  6. CX-100059 Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Pilot-Scale Mixotrophic Algae Integrated Biorefinery Award Number: DE-EE0006245 CX(s) Applied: A9, B5.15 Date: 09/15/2014 Location(s): IA Office(s): Golden Field Office

  7. CX-010749: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Pilot-Scale Mixotrophic Algae Integrated Biorefinery CX(s) Applied: A9, B5.15 Date: 08/15/2013 Location(s): Illinois Offices(s): Golden Field Office

  8. CX-011272: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    “Nanite” For Better Well-Bore Integrity and Zonal Isolation CX(s) Applied: B3.6 Date: 09/27/2013 Location(s): Hawaii Offices(s): National Energy Technology Laboratory

  9. CX-008995: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-008995: Categorical Exclusion Determination "Development of Integrated Die Casting Process For Large Thin-Wall Magnesium Applications CX(s) Applied: A9, B3.6 Date: 08...

  10. CX-012538: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    A Coupled Geomechanical, Acoustic, Transport and Sorption Study of Caprick Integrity in CO2 Seq. CX(s) Applied: A9, B3.6Date: 41836 Location(s): New MexicoOffices(s): National Energy Technology Laboratory

  11. CX-012537: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    A Coupled Geomechanical, Acoustic, Transport and Sorption Study of Caprick Integrity in CO2 Seq. CX(s) Applied: A1, A9Date: 41836 Location(s): ColoradoOffices(s): National Energy Technology Laboratory

  12. CX-008492: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Carbon Dioxide Capture from Integrated Gasification Combined Cycle Gas Streams Using the Ammonium Carbonate-Ammonium Bicarbonate Process CX(s) Applied: A9 Date: 07/23/2012 Location(s): Texas Offices(s): National Energy Technology Laboratory

  13. CX-007365: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Integration of the Green Lane Energy Biogas Generator CX(s) Applied: B1.7 Date: 11/17/2011 Location(s): Oregon Offices(s): Bonneville Power Administration

  14. CX-008970: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Fossil Fleet Transition with Fuel Changes and Large Scale Variable Renewable Integration CX(s) Applied: A9, A11 Date: 08/01/2012 Location(s): Spain Offices(s): National Energy Technology Laboratory

  15. RL-721 REV4 Document ID Number: NEPA REVIEW SCREENING FORM

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    or 10 CFR 1021.211)? 0 lZl List CX to be applied and complete Categorical Exclusion Integral Elements (where an action might fit within multiple CXs, use the CX that best fits...

  16. RL-721 REV4 Document ID Number: NEPA REVIEW SCREENING FORM

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    or 10 CFR 1021.211 )? D g) List CX to be applied and complete Categorical Exclusion Integral Elements (where an action might fit within multiple CXs, use the CX that best fits...

  17. CX-010847: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Characterization of Methanotrophs at the Old Integrated Demonstration Site, M Area CX(s) Applied: B3.1 Date: 07/23/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office

  18. CX-012700: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Integrated Computational and Experimental Study of Radiation Damage Effects in Grade 92 Steel and Alloy 709 – University of Tennessee CX(s) Applied: B3.6Date: 41862 Location(s): TennesseeOffices(s): Nuclear Energy

  19. CX-012684: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Integrated Computational and Experimental Study of Radiation Damage Effects in Grade 92 Steel and Alloy 709 – University of Tennessee CX(s) Applied: B3.6Date: 41862 Location(s): TennesseeOffices(s): Nuclear Energy

  20. CX-010926: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Development of Integrated Biomimetic Framework with Intelligent Monitoring, Cognition, and Decision... CX(s) Applied: A9 Date: 09/25/2013 Location(s): West Virginia Offices(s): National Energy Technology Laboratory

  1. CX-010927: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Development of Integrated Biomimetic Framework with Intelligent Monitoring, Cognition, and Decision... CX(s) Applied: A9 Date: 09/25/2013 Location(s): Illinois Offices(s): National Energy Technology Laboratory

  2. CX-010822: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Manufacturing Process for Organic Light-Emitting Diode (OLED) Integrated Substrate CX(s) Applied: B3.6 Date: 07/30/2013 Location(s): Illinois Offices(s): National Energy Technology Laboratory

  3. CX-010824: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Manufacturing Process for Organic Light-Emitting Diode (OLED) Integrated Substrate CX(s) Applied: B3.6 Date: 07/30/2013 Location(s): New Jersey Offices(s): National Energy Technology Laboratory

  4. CX-010821: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Manufacturing Process for Organic Light-Emitting Diode (OLED) Integrated Substrate CX(s) Applied: B3.6 Date: 07/30/2013 Location(s): Pennsylvania Offices(s): National Energy Technology Laboratory

  5. CX-010823: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Manufacturing Process for Organic Light-Emitting Diode (OLED) Integrated Substrate CX(s) Applied: B3.6 Date: 07/30/2013 Location(s): Pennsylvania Offices(s): National Energy Technology Laboratory

  6. CX-011252: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Concentrating Solar Power Heat Integration for Baseload Renewable Energy Deployment CX(s) Applied: A9 Date: 09/23/2013 Location(s): California Offices(s): Golden Field Office

  7. CX-007432: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Integrated Optimization and Cost Analysis of an Innovative Offshore Wind Plant Design for Shallow and Transitional Water Depths CX(s) Applied: A9 Date: 12/07/2011 Location(s): Virginia Offices(s): Golden Field Office

  8. CX-011397: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Module-Integrated Power Converters Based on Universal Dock CX(s) Applied: A9, B3.6, B5.16 Date: 12/16/2013 Location(s): Texas Offices(s): Golden Field Office

  9. CX-012447: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Breakthrough Hybrid CTL Process Integrating Advanced Technologies for Coal Gasification, NG Partial... CX(s) Applied: B3.6Date: 41877 Location(s): North CarolinaOffices(s): National Energy Technology Laboratory

  10. CX-012453: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Breakthrough Hybrid CTL Process Integrating Advanced Technologies for Coal Gasification, NG Partial… CX(s) Applied: A11Date: 41877 Location(s): CaliforniaOffices(s): National Energy Technology Laboratory

  11. CX-012464: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Breakthrough Hybrid CTL Process Integrating Advanced Technologies for Coal Gasification, NG Partial... CX(s) Applied: B3.6Date: 41877 Location(s): IllinoisOffices(s): National Energy Technology Laboratory

  12. CX-009478: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Development of Improved Caprock Integrity and Risk Assessment Techniques CX(s) Applied: A9 Date: 10/09/2012 Location(s): California Offices(s): National Energy Technology Laboratory

  13. CX-009479: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Development of Improved Caprock Integrity and Risk Assessment Techniques CX(s) Applied: A9 Date: 10/09/2012 Location(s): Texas Offices(s): National Energy Technology Laboratory

  14. CX-011589: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Risk Assessment of Structural Integrity of Transportation Casks CX(s) Applied: B3.6 Date: 11/04/2013 Location(s): Utah Offices(s): Idaho Operations Office

  15. CX-011797: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    A Geomechanical Model for Gas Shales Based on Integration of Stress CX(s) Applied: A9 Date: 02/03/2014 Location(s): Pennsylvania Offices(s): National Energy Technology Laboratory

  16. CX-012505: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    A Geomechanical Model for Gas Shales Based on Integration of Stress CX(s) Applied: A9, A11, B3.6Date: 41851 Location(s): TexasOffices(s): National Energy Technology Laboratory

  17. CX-012507: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    A Geomechanical Model for Gas Shales Based on Integration of Stress (Project Extension) CX(s) Applied: A9, A11Date: 41851 Location(s): PennsylvaniaOffices(s): National Energy Technology Laboratory

  18. CX-010781: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    A Geomechanical Model for Gas Shales Based on Integration of Stress CX(s) Applied: A9, A11, B3.6 Date: 08/21/2013 Location(s): Pennsylvania Offices(s): National Energy Technology Laboratory

  19. CX-010782: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    A Geomechanical Model for Gas Shales Based on Integration of Stress CX(s) Applied: A9 Date: 08/21/2013 Location(s): Texas Offices(s): National Energy Technology Laboratory

  20. CX-007358: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Integration of the University of Oregon’s Cogeneration Project CX(s) Applied: B1.7 Date: 12/01/2011 Location(s): Oregon Offices(s): Bonneville Power Administration

  1. CX-011266: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Area 1: Systematic Assessment of Wellbore Integrity for Geologic Carbon Storage Projects CX(s) Applied: B3.1 Date: 09/30/2013 Location(s): Ohio Offices(s): National Energy Technology Laboratory

  2. CX-008500: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    All Electric Subsea Autonomous High Integrity Pressure Protection System CX(s) Applied: A9, A11, B3.6 Date: 07/16/2012 Location(s): New York Offices(s): National Energy Technology Laboratory

  3. CX-009432: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Transformational Approach to Reducing the Total System Costs of Building Integrated Photovoltaics CX(s) Applied: A9, B5.15 Date: 11/07/2012 Location(s): Michigan Offices(s): Golden Field Office

  4. CX-100056 Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Advancing Commercialization of Algal Biofuels Through Increased Biomass Productivity and Technical Integration Award Number: DE-EE0006637 CX(s) Applied: A9 Date: 09/15/2014 Location(s): HI Office(s): Golden Field Office

  5. CX-007790: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Hydroelectric Power Rate Increase for the Integrated System of Hydropower Projects CX(s) Applied: B4.3 Date: 10/20/2011 Location(s): CX: none Offices(s): Southwestern Power Administration

  6. CX-009859: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Cost-Effective Treatment of Flowback and Produced Water via an Integrated Precipitative Supercritical Process CX(s) Applied: A9, A11 Date: 01/15/2013 Location(s): Kentucky Offices(s): National Energy Technology Laboratory

  7. Integrated Building Management System (IBMS)

    SciTech Connect (OSTI)

    Anita Lewis

    2012-07-01

    This project provides a combination of software and services that more easily and cost-effectively help to achieve optimized building performance and energy efficiency. Featuring an open-platform, cloud- hosted application suite and an intuitive user experience, this solution simplifies a traditionally very complex process by collecting data from disparate building systems and creating a single, integrated view of building and system performance. The Fault Detection and Diagnostics algorithms developed within the IBMS have been designed and tested as an integrated component of the control algorithms running the equipment being monitored. The algorithms identify the normal control behaviors of the equipment without interfering with the equipment control sequences. The algorithms also work without interfering with any cooperative control sequences operating between different pieces of equipment or building systems. In this manner the FDD algorithms create an integrated building management system.

  8. String theory and integrable systems

    E-Print Network [OSTI]

    Nissimov, Emil R; Nissimov, Emil; Pacheva, Svetlana

    1993-01-01

    This is mainly a brief review of some key achievements in a `hot'' area of theoretical and mathematical physics. The principal aim is to outline the basic structures underlying {\\em integrable} quantum field theory models with {\\em infinite-dimensional} symmetry groups which display a radically new type of {\\em quantum group} symmetries. Certain particular aspects are elaborated upon with some detail: integrable systems of Kadomtsev-Petviashvili type and their reductions appearing in matrix models of strings; Hamiltonian approach to Lie-Poisson symmetries; quantum field theory approach to two-dimensional relativistic integrable models with dynamically broken conformal invariance. All field-theoretic models in question are of primary relevance to diverse branches of physics ranging from nonlinear hydrodynamics to string theory of fundamental particle interactions at ultra-high energies.

  9. INSTRUCTIONS INTEGRATED OCEAN DRILLING PROGRAM (IODP)

    E-Print Network [OSTI]

    INSTRUCTIONS FOR THE INTEGRATED OCEAN DRILLING PROGRAM (IODP) MANUSCRIPT AND PHOTOGRAPH COPYRIGHT, Integrated Ocean Drilling Program, 1000 Discovery Drive, College Station, Texas 77845, USA A signed copyright of the Integrated Ocean Drilling Program or any other publications of the Integrated Ocean Drilling Program. Author

  10. 221A Lecture Notes Path Integral

    E-Print Network [OSTI]

    Murayama, Hitoshi

    221A Lecture Notes Path Integral 1 Feynman's Path Integral Formulation Feynman's formulation to reach a position xf at time tf , you integrate over all possible paths connecting the points with a weight factor given by the classical action for each path. Hence the name path integral. This is it. Note

  11. ON THE C-INTEGRAL BENEDETTO BONGIORNO

    E-Print Network [OSTI]

    Talvila, Erik

    ON THE C-INTEGRAL BENEDETTO BONGIORNO Let F : [a, b] R be a differentiable function and let f, the problem of primitives was solved by A. Denjoy with an integration process (called totalization) that includes the Lebesgue integral and the Riemann improper integral. Two years later, a second solution

  12. ON THE C-INTEGRAL BENEDETTO BONGIORNO

    E-Print Network [OSTI]

    Talvila, Erik

    ON THE C-INTEGRAL BENEDETTO BONGIORNO Let F : [a; b] ! R be a di#11;erentiable function and let f, the problem of primitives was solved by A. Denjoy with an integration process (called totalization) that includes the Lebesgue integral and the Riemann improper integral. Two years later, a second solution

  13. Academic Integrity: A Letter to My Students

    E-Print Network [OSTI]

    McQuade, D. Tyler

    , or the possibility of advancement, or our esteem in the eyes of others? Personal integrity is not a quality weAcademic Integrity: A Letter to My Students ¹ Here at the beginning of the semester I want to say something to you about academic integrity. I'm deeply convinced that integrity is an essential part of any

  14. ESIF 2014 (Energy Systems Integration Facility) (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2015-01-01

    This report covers research highlights and achievements for the Energy Systems Integration Facility in 2014.

  15. Energy Storage Management for VG Integration (Presentation)

    SciTech Connect (OSTI)

    Kirby, B.

    2011-10-01

    This presentation describes how you economically manage integration costs of storage and variable generation.

  16. An Adaptive Multidimensional Integration Routine for a Vector of Integrals.

    E-Print Network [OSTI]

    Genz, Alan

    NDIM .....dx1 where FUNSUB is a vector of integrands of length NUMFUN and H is a NDIM dimensional hyper algorithm for the numerical integration of a vector of integrand functions over a hyper-rectangular region dimensional degree 13 rule. · D113RE is a three dimensional degree 11 rule. · D09HRE is a degree 9 rule

  17. Quantum Integrals from Coalgebra Structure

    E-Print Network [OSTI]

    Sarah Post; Danilo Riglioni

    2014-10-16

    Quantum versions of the hydrogen atom and the harmonic oscillator are studied on non Euclidean spaces of dimension N. 2N-1 integrals, of arbitrary order, are constructed via a multi-dimensional version of the factorization method, thus confirming the conjecture of D Riglioni 2013 J. Phys. A: Math. Theor. 46 265207. The systems are extended via coalgebra extension of sl(2) representations, although not all integrals are expressible in these generators. As an example, dimensional reduction is applied to 4D systems to obtain extension and new proofs of the superintegrability of known families of Hamiltonians.

  18. Stieltjes Integral Theorem and The Hilbert Transform

    E-Print Network [OSTI]

    Luisiana Xavier Cundin; Norman Barsalou

    2011-05-20

    Stieltjes integral theorem is more commonly known by the phrase 'integration by parts' and enables rearrangement of an otherwise intractable integral to a more amenable form; often permitting completion of an integral in closed form. Applying Stieltjes integral theorem to the Hilbert transform yields an equivalent alternate integral definition, which is homeomorphic and exhibits accelerated computation. By virtue of the convolution theorem, the integral is mapped to Fourier image space and delineates requirements for the inverse Fourier transform, also, these requirements reveal the underlying reason for increased computational speed. Lastly, an alternative to Cauchy's integral formula is deduced by extending the line integral into the complex domain and involves a line integral with logarithmic kernel.

  19. NEMS integrating module documentation report

    SciTech Connect (OSTI)

    Not Available

    1993-12-14

    The National Energy Modeling System (NEMS) is a computer modeling system that produces a general equilibrium solution for energy supply and demand in the US energy markets. The model achieves a supply and demand balance in the end-use demand regions, defined as the nine Census Divisions, by solving for the prices of each energy type such that the quantities producers are willing to supply equal the quantities consumers wish to consume. The system reflects market economics, industry structure, and energy policies and regulations that influence market behavior. The NEMS Integrating Module is the central integrating component of a complex modeling system. As such, a thorough understanding of its role in the modeling process can only be achieved by placing it in the proper context with respect to the other modules. To that end, this document provides an overview of the complete NEMS model, and includes brief descriptions of the modules with which the Integrating Module interacts. The emphasis and focus, however, is on the structure and function of the Integrating Module of NEMS.

  20. Integrating Food Production and Biodiversity

    E-Print Network [OSTI]

    with food, and NPK fluxes at farm level. The biofuels were crude rapeseed oil, horse draft, ethanol from a combination of a workhorse and a crude rapeseed oil-fuelled tractor. Ethanol from wheat had the largest impactIntegrating Food Production and Biodiversity Energy and Scale Issues in Implementation Kristina

  1. TREATMENT SYSTEMS AN INTEGRATED APPROACH

    E-Print Network [OSTI]

    for on-site management and treatment of effluent and solid waste 3. Provide for surface water attenuationECOLOGICAL TREATMENT SYSTEMS AN INTEGRATED APPROACH TO THE TREATMENT OF WASTE AND WASTE WATER In nature there is no waste, because the waste of one organism is food for another Inherent

  2. The Center for integrative genomics

    E-Print Network [OSTI]

    Kaessmann, Henrik

    The Center for integrative genomics Report 2005­2006 #12;Presentation Director's message 4 Scientific advisory committee 6 Organigram of the CIG 7 research The structure and function of genomes and their evolution alexandrereymond ­ Genome structure and expression 10 henrikKaessmann ­ Evolutionary genomics 12

  3. Communication Needs and Integration Options

    E-Print Network [OSTI]

    consumer participation in the smart grid. It describes the motivation for AMI, surveys the current stateCommunication Needs and Integration Options for AMI in the Smart Grid Future Grid Initiative White Paper Power Systems Engineering Research Center Empowering Minds to Engineer the Future Electric Energy

  4. February 2012 Towards Integrated Water

    E-Print Network [OSTI]

    US Army Corps of Engineers

    February 2012 Towards Integrated Water Resources Management A Conceptual Framework for U.S.Army Corps of Engineers Water and Related Land Resources Implementation Studies 2012-VSP-01 #12;Throughout its history, the Institute for Water Resources (IWR) has invited preeminent water resources

  5. Integrated Disposal Facility Risk Assessment

    SciTech Connect (OSTI)

    MANN, F. M.

    2003-06-03

    An environmental risk assessment associated with the disposal of projected Immobilized Low-Activity Waste, solid wastes and failed or decommissioned melters in an Integrated Disposal Facility was performed. Based on the analyses all performance objectives associated with the groundwater, air, and intruder pathways were met.

  6. January 2005 INTEGRATING IT SECURITY

    E-Print Network [OSTI]

    in a cost- effective manner. The implementation of IT security and capital planning practices withinJanuary 2005 INTEGRATING IT SECURITY INTO THE CAPITAL PLANNING AND INVESTMENT CONTROL PROCESS released Special Publication (SP) 800-65, Inte grating IT Security into the Capital Planning and Investment

  7. DCC Case Study: Integrative Biology 

    E-Print Network [OSTI]

    Donnelly, Martin; Boyd, Victoria; Spellman, Jill

    2008-04-03

    these illnesses. The main aim of the Integrative Biology (IB) project is to realise this potential by developing multi-scale models - spanning the range from genes to whole organs - and to provide data management features for its disparate users including...

  8. Integrated Mechanical & Electrical Engineering (IMEE)

    E-Print Network [OSTI]

    Burton, Geoffrey R.

    Integrated Mechanical & Electrical Engineering (IMEE) Department of Electronic & Electrical and electrical engineering are in great demand because of their ability to work on complex interdisciplinary and become an expert in the core areas of both mechanical and electrical engineering. Subject aims

  9. NORTHWESTERN UNIVERSITY An Integrated Architecture

    E-Print Network [OSTI]

    Forbus, Kenneth D.

    the Integrated Problem Solving Architecture (IPSA) that combines qualitative, quantitative and diagrammatic processing model that captures the skills used in engineering problem solving. This thesis describes. · Past and present members of the Qualitative Reasoning Group and especially Ron Ferguson and John

  10. Analysis of Integrated Tropical Biorefineries

    E-Print Network [OSTI]

    the integration of an anaerobic digester into each biochemical platform technology. The combustion of biogas to generate process heat and electricity allows the starch platform technology to become thermally self not rely on biogas combustion to be thermally self- sufficient. However, their output of excess electricity

  11. Graphene Growth and Device Integration

    E-Print Network [OSTI]

    INVITED P A P E R Graphene Growth and Device Integration This paper describes one of the emerging methods for growing grapheneVthe chemical vapor deposition methodVwhich is based on a catalytic reaction, Fellow IEEE, Robert M. Wallace, Fellow IEEE, and Rodney S. Ruoff ABSTRACT | Graphene has been introduced

  12. Algorithms for integral and half-integral multiflows Department of Computer Science, Cornell University

    E-Print Network [OSTI]

    Pap, Gyula

    Algorithms for integral and half-integral multiflows Gyula Pap Department of Computer Science, Cornell University Oktober 19, 2009 Gyula Pap Algorithms for integral and half-integral multiflows #12-capacities) A lot is known about edge-capacitated multiflows: Lov´asz-Cherkassky 1972 (half-integrality of the LP

  13. INVERSIONS OF INTEGRAL OPERATORS AND ELLIPTIC BETA INTEGRALS ON ROOT SYSTEMS

    E-Print Network [OSTI]

    Warnaar, Ole

    INVERSIONS OF INTEGRAL OPERATORS AND ELLIPTIC BETA INTEGRALS ON ROOT SYSTEMS VYACHESLAV P- metric integrals associated to a pair of root systems. Using the (A,C) inversion formula to invert one of the known C-type elliptic beta integrals, we obtain a new elliptic beta integral for the root system of type

  14. Call for Papers Special Issue on Integrated Decision Support Systems

    E-Print Network [OSTI]

    Winckler, Marco Antonio Alba

    ); integration of decisions across both forward supply chains and reverse logistics; integration of decisions

  15. 1. An integral extension of integral domains where going-down fails ...

    E-Print Network [OSTI]

    2011-11-10

    An integral extension of integral domains where going-down fails. Definition 1. Let A be a subring of an integral domain B. The conductor of B into A is c = {a ? A ...

  16. MHD Integrated Topping Cycle Project

    SciTech Connect (OSTI)

    Not Available

    1992-07-01

    This seventeenth quarterly technical progress report of the MHD Integrated Topping Cycle Project presents the accomplishments during the period August 1, 1991 to October 31, 1991. Manufacturing of the prototypical combustor pressure shell has been completed including leak, proof, and assembly fit checking. Manufacturing of forty-five cooling panels was also completed including leak, proof, and flow testing. All precombustor internal components (combustion can baffle and swirl box) were received and checked, and integration of the components was initiated. A decision was made regarding the primary and backup designs for the 1A4 channel. The assembly of the channel related prototypical hardware continued. The cathode wall electrical wiring is now complete. The mechanical design of the diffuser has been completed.

  17. Transmission and Grid Integration: Electricity, Resources, & Building Systems Integration (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2009-09-01

    Factsheet developed to describe the activites of the Transmission and Grid Integration Group within NREL's Electricity, Resources, and Buildings Systems Integration center.

  18. Transmission and Grid Integration: Electricity, Resources, & Building Systems Integration (Fact Sheet)

    SciTech Connect (OSTI)

    2009-09-01

    Factsheet developed to describe the activities of the Transmission and Grid Integration Group within NREL's Electricity, Resources, and Buildings Systems Integration center.

  19. Grid Integration of Robotic Telescopes

    E-Print Network [OSTI]

    F. Breitling; T. Granzer; H. Enke

    2009-03-23

    Robotic telescopes and grid technology have made significant progress in recent years. Both innovations offer important advantages over conventional technologies, particularly in combination with one another. Here, we introduce robotic telescopes used by the Astrophysical Institute Potsdam as ideal instruments for building a robotic telescope network. We also discuss the grid architecture and protocols facilitating the network integration that is being developed by the German AstroGrid-D project. Finally, we present three user interfaces employed for this purpose.

  20. The First INTEGRAL AGN Catalog

    E-Print Network [OSTI]

    V. Beckmann; N. Gehrels; C. R. Shrader; S. Soldi

    2005-10-18

    We present the first INTEGRAL AGN catalog, based on observations performed from launch of the mission in October 2002 until January 2004. The catalog includes 42 AGN, of which 10 are Seyfert 1, 17 are Seyfert 2, and 9 are intermediate Seyfert 1.5. The fraction of blazars is rather small with 5 detected objects, and only one galaxy cluster and no star-burst galaxies have been detected so far. A complete subset consists of 32 AGN with a significance limit of 7 sigma in the INTEGRAL/ISGRI 20-40 keV data. Although the sample is not flux limited, the distribution of sources shows a ratio of obscured to unobscured AGN of 1.5 - 2.0, consistent with luminosity dependent unified models for AGN. Only four Compton-thick AGN are found in the sample. Based on the INTEGRAL data presented here, the Seyfert 2 spectra are slightly harder (Gamma = 1.95 +- 0.01) than Seyfert 1.5 (Gamma = 2.10 +- 0.02) and Seyfert 1 (Gamma = 2.11 +- 0.05).

  1. MHD Integrated Topping Cycle Project

    SciTech Connect (OSTI)

    Not Available

    1992-01-01

    The overall objective of the project is to design and construct prototypical hardware for an integrated MHD topping cycle, and conduct long duration proof-of-concept tests of integrated system at the US DOE Component Development and Integration Facility in Butte, Montana. The results of the long duration tests will augment the existing engineering design data base on MHD power train reliability, availability, maintainability, and performance, and will serve as a basis for scaling up the topping cycle design to the next level of development, an early commercial scale power plant retrofit. The components of the MHD power train to be designed, fabricated, and tested include: A slagging coal combustor with a rated capacity of 50 MW thermal input, capable of operation with an Eastern (Illinois {number sign}6) or Western (Montana Rosebud) coal, a segmented supersonic nozzle, a supersonic MHD channel capable of generating at least 1.5 MW of electrical power, a segmented supersonic diffuser section to interface the channel with existing facility quench and exhaust systems, a complete set of current control circuits for local diagonal current control along the channel, and a set of current consolidation circuits to interface the channel with the existing facility inverter.

  2. Integrated Resource Planning Model (IRPM)

    SciTech Connect (OSTI)

    Graham, T. B.

    2010-04-01

    The Integrated Resource Planning Model (IRPM) is a decision-support software product for resource-and-capacity planning. Users can evaluate changing constraints on schedule performance, projected cost, and resource use. IRPM is a unique software tool that can analyze complex business situations from a basic supply chain to an integrated production facility to a distributed manufacturing complex. IRPM can be efficiently configured through a user-friendly graphical interface to rapidly provide charts, graphs, tables, and/or written results to summarize postulated business scenarios. There is not a similar integrated resource planning software package presently available. Many different businesses (from government to large corporations as well as medium-to-small manufacturing concerns) could save thousands of dollars and hundreds of labor hours in resource and schedule planning costs. Those businesses also could avoid millions of dollars of revenue lost from fear of overcommitting or from penalties and lost future business for failing to meet promised delivery by using IRPM to perform what-if business-case evaluations. Tough production planning questions that previously were left unanswered can now be answered with a high degree of certainty. Businesses can anticipate production problems and have solutions in hand to deal with those problems. IRPM allows companies to make better plans, decisions, and investments.

  3. Integrated nonthermal treatment system study

    SciTech Connect (OSTI)

    Biagi, C.; Bahar, D.; Teheranian, B.; Vetromile, J. [Morrison Knudsen Corp. (United States); Quapp, W.J. [Nuclear Metals (United States); Bechtold, T.; Brown, B.; Schwinkendorf, W. [Lockheed Martin Idaho Technologies Co., Idaho Falls, ID (United States); Swartz, G. [Swartz and Associates (United States)

    1997-01-01

    This report presents the results of a study of nonthermal treatment technologies. The study consisted of a systematic assessment of five nonthermal treatment alternatives. The treatment alternatives consist of widely varying technologies for safely destroying the hazardous organic components, reducing the volume, and preparing for final disposal of the contact-handled mixed low-level waste (MLLW) currently stored in the US Department of Energy complex. The alternatives considered were innovative nonthermal treatments for organic liquids and sludges, process residue, soil and debris. Vacuum desorption or various washing approaches are considered for treatment of soil, residue and debris. Organic destruction methods include mediated electrochemical oxidation, catalytic wet oxidation, and acid digestion. Other methods studied included stabilization technologies and mercury separation of treatment residues. This study is a companion to the integrated thermal treatment study which examined 19 alternatives for thermal treatment of MLLW waste. The quantities and physical and chemical compositions of the input waste are based on the inventory database developed by the US Department of Energy. The Integrated Nonthermal Treatment Systems (INTS) systems were evaluated using the same waste input (2,927 pounds per hour) as the Integrated Thermal Treatment Systems (ITTS). 48 refs., 68 figs., 37 tabs.

  4. Integrity Checking for Uncertain Data Hendrik Decker

    E-Print Network [OSTI]

    Martinenghi, Davide

    Integrity Checking for Uncertain Data Hendrik Decker Instituto Tecnol´ogico de Inform´atica E uncertainty properties of data by integrity constraints, it can be hoped to achieve a double benefit: firstly

  5. Wind Power Integration: Exploring Impacts and Alternatives

    E-Print Network [OSTI]

    Walter, M.Todd

    Wind Power Integration: Exploring Impacts and Alternatives Assist. Prof. C sustainable sources of energy. The idea of harnessing wind energy has been there have been no less than fifteen in-depth wind integration studies

  6. A CRITERION FOR INTEGRAL DEPENDENCE OF MODULES ...

    E-Print Network [OSTI]

    2007-11-19

    numerical criteria for integral dependence of ideals and modules. 1. ... of E or, equivalently, E is integral over U if Ei+1 = UEi for some i ? 0, where the products

  7. Integral equations, fractional calculus and shift operator

    E-Print Network [OSTI]

    D. Babusci; G. Dattoli; D. Sacchetti

    2010-07-29

    We present an extension of a previously developed method employing the formalism of the fractional derivatives to solve new classes of integral equations. This method uses different forms of integral operators that generalizes the exponential shift operator.

  8. An example of Feynman-Jackson integral

    E-Print Network [OSTI]

    Rafael Diaz; Eddy Pariguan

    2007-07-10

    We review the construction of a q-analogue of the Gaussian measure. We apply that construction to obtain a q-analogue of Feynman integrals and to compute explicitly an example of such integrals.

  9. Vertical Integration and Technology: Theory and Evidence

    E-Print Network [OSTI]

    Acemoglu, Daron

    We study the determinants of vertical integration. We first derive a number of predictions regarding the relationship between technology intensity and vertical integration from a simple incomplete contracts model. Then, ...

  10. Integrated Energy and Greenhouse Gas Management System 

    E-Print Network [OSTI]

    Spates, C. N.

    2010-01-01

    , the results obtained and the lessons learned in developing an integrated Energy and Greenhouse Gas Management System with a major industrial manufacturing company in the Midwest. Key subject areas covered include: Integration of Climate Change and Energy...

  11. Estimating uncertainties in integrated reservoir studies 

    E-Print Network [OSTI]

    Zhang, Guohong

    2004-09-30

    existing methods. The integrated mismatch method tends to generate smaller ranges of uncertainty than many existing methods. When starting from nonoptimal reservoir models, in some cases the integrated mismatch method is able to bracket the true reserves...

  12. Cost estimation of human systems integration

    E-Print Network [OSTI]

    Liu, Kevin K. (Kevin Kaitan), 1986-

    2010-01-01

    Human Systems Integration (HSI) is the interdisciplinary technical and management processes for integrating human considerations within and across all system elements. The goal of this research is to develop a better ...

  13. An Integrated Approach to Nanotechnology Governance

    E-Print Network [OSTI]

    Paddock, LeRoy

    2010-01-01

    An Integrated Approach to Nanotechnology Governance LeRoyLegal and Social Issues . NANOTECHNOLOGY1. A National Nanotechnology Governance D

  14. Western Wind and Solar Integration Study

    SciTech Connect (OSTI)

    GE Energy

    2010-05-01

    This report provides a full description of the Western Wind and Solar Integration Study (WWSIS) and its findings.

  15. Integral of Map into Abelian $?$-group

    E-Print Network [OSTI]

    Aleks Kleyn

    2014-03-12

    The common in ring, module and algebra is that they are Abelian group with respect to addition. This property is enough to study integration. I treat integral of measurable map into normed Abelian $\\Omega$-group. Theory of integration of maps into $\\Omega$-group has a lot of common with theory of integration of functions of real variable. However I had to change some statements, since they implicitly assume either compactness of range or total order in $\\Omega$-group.

  16. On an integral involving the digamma function

    E-Print Network [OSTI]

    Donal F. Connon

    2012-12-09

    We consider several possible approaches to evaluating an integral involving the digamma function and a related logarithmic series.

  17. Track 6: Integrating Safety Into Security Operations

    Broader source: Energy.gov [DOE]

    ISM Workshop Presentations Knoxville Convention Center, Knoxville, TN August 2009 Track 6: Integrating Safety Into Security Operations

  18. Track 5: Integration of Safety Into Design

    Broader source: Energy.gov [DOE]

    ISM Workshop Presentations Knoxville Convention Center, Knoxville, TN August 2009 Track 5: Integration of Safety Into Design

  19. Eastern Renewable Generation Integration Study (Presentation)

    SciTech Connect (OSTI)

    Bloom, A.

    2014-05-01

    This presentation provides a high-level overview of the Eastern Renewable Generation Integration Study process, scenarios, tools, and goals.

  20. Integrating Experimental Design Into Your Program

    Broader source: Energy.gov [DOE]

    This presentation, given through the DOE's Technical Assitance Program (TAP), exaplin how you can integrate experimental design into your program.

  1. Integrating Renewable Energy Systems in Buildings (Presentation)

    SciTech Connect (OSTI)

    Hayter, S. J.

    2011-08-01

    This presentation on integrating renewable energy systems into building was presented at the August, 2011 ASHRAE Region IX CRC meetings.

  2. Integrating Experimental Design Into Your Program

    Office of Energy Efficiency and Renewable Energy (EERE)

    This presentation, given through the DOE's Technical Assistance Program (TAP), explain how you can integrate experimental design into your program.

  3. Building Data Integration Systems via Mass Collaboration

    E-Print Network [OSTI]

    Doan, AnHai

    Building Data Integration Systems via Mass Collaboration Robert McCann, AnHai Doan, Vanitha 61801, USA {rlmccann, anhai, varadara, kramnik}@cs.uiuc.edu ABSTRACT Building data integration systems on the Web and at enterprises has generated much interest in building data integration systems. Figure 1

  4. ITERATED INTEGRALS OF SUPERCONNECTIONS KIYOSHI IGUSA

    E-Print Network [OSTI]

    Igusa, Kiyoshi

    ITERATED INTEGRALS OF SUPERCONNECTIONS KIYOSHI IGUSA Abstract. Iterated integration of a connection gives the holonomy or parallel transport of the connection. Iterated integration of a superconnection gives something else which we call a "superconnection parallel transport." We ask under what conditions

  5. Some Results on Factorization in Integral Domains

    E-Print Network [OSTI]

    Bennett, Jack Robert

    2011-01-01

    1, ?, . . . , .? p?2 } is an integral basis for the ring ofSo that A p has integral basis 1, ? m/p , . . . , ? m/p p?2n ? m/p p?2 and A m has integral basis 1, ?, . . . , ? ?(m)?

  6. ACADEMIC INTEGRITY CODE REPORTING AND INVESTIGATION PROCEDURES

    E-Print Network [OSTI]

    Droegemeier, Kelvin K.

    , or other persons may report suspected violations of the Integrity Code. Reporters are encouraged to providePage 1 ACADEMIC INTEGRITY CODE REPORTING AND INVESTIGATION PROCEDURES 1. DEFINITIONS a. Alleged Violator: a student alleged to have violated the Academic Integrity Code, or one about whom a reasonable

  7. Academy of Integrated Science College of Science

    E-Print Network [OSTI]

    Zallen, Richard

    FALL 2015 Academy of Integrated Science College of Science Virginia Tech Integrated Science SCIENCE CURRICULUM COMPILED BY NORA SULLIVAN PROGRAM ACADEMIC ADVISOR ACADEMY OF INTEGRATED SCIENCE COLLEGE OF SCIENCE VIRGINIA TECH NORA84@VT.EDU 540-231-2442 WWW.SCIENCE.VT.EDU/AIS/ISC #12

  8. JOURNAL OF INTEGRAL EQUATIONS AND APPLICATIONS

    E-Print Network [OSTI]

    Atkinson, Kendall

    of numerical methods for calculating fixed points of nonlinear integral operators. The emphasis is on general differential equations, and the methods used are very different than those used for Fredholm integral operatorsJOURNAL OF INTEGRAL EQUATIONS AND APPLICATIONS Volume 4, Number 1, Winter 1992 A SURVEY

  9. Toni L. Meier Director, Logistics Management Integration

    E-Print Network [OSTI]

    Toni L. Meier Director, Logistics Management Integration Department Naval Air Systems Command Ms. Meier is currently the Director, Logistics Management Integration Department. As the Director she is responsible for life cycle integrated logistics support of 3,900 Naval Aviation aircraft and weapons programs

  10. Edinburgh Research Explorer Integrated Magnetic MEMS Relays

    E-Print Network [OSTI]

    Millar, Andrew J.

    Edinburgh Research Explorer Integrated Magnetic MEMS Relays Citation for published version: Schiavone, G, Desmulliez, MPY & Walton, AJ 2014, 'Integrated Magnetic MEMS Relays: Status of the Technology.mdpi.com/journal/micromachines Review Integrated Magnetic MEMS Relays: Status of the Technology Giuseppe Schiavone 1,2, *, Marc P. Y

  11. Integrated Transmission and Distribution Control

    SciTech Connect (OSTI)

    Kalsi, Karanjit; Fuller, Jason C.; Tuffner, Francis K.; Lian, Jianming; Zhang, Wei; Marinovici, Laurentiu D.; Fisher, Andrew R.; Chassin, Forrest S.; Hauer, Matthew L.

    2013-01-16

    Distributed, generation, demand response, distributed storage, smart appliances, electric vehicles and renewable energy resources are expected to play a key part in the transformation of the American power system. Control, coordination and compensation of these smart grid assets are inherently interlinked. Advanced control strategies to warrant large-scale penetration of distributed smart grid assets do not currently exist. While many of the smart grid technologies proposed involve assets being deployed at the distribution level, most of the significant benefits accrue at the transmission level. The development of advanced smart grid simulation tools, such as GridLAB-D, has led to a dramatic improvement in the models of smart grid assets available for design and evaluation of smart grid technology. However, one of the main challenges to quantifying the benefits of smart grid assets at the transmission level is the lack of tools and framework for integrating transmission and distribution technologies into a single simulation environment. Furthermore, given the size and complexity of the distribution system, it is crucial to be able to represent the behavior of distributed smart grid assets using reduced-order controllable models and to analyze their impacts on the bulk power system in terms of stability and reliability. The objectives of the project were to: • Develop a simulation environment for integrating transmission and distribution control, • Construct reduced-order controllable models for smart grid assets at the distribution level, • Design and validate closed-loop control strategies for distributed smart grid assets, and • Demonstrate impact of integrating thousands of smart grid assets under closed-loop control demand response strategies on the transmission system. More specifically, GridLAB-D, a distribution system tool, and PowerWorld, a transmission planning tool, are integrated into a single simulation environment. The integrated environment allows the load flow interactions between the bulk power system and end-use loads to be explicitly modeled. Power system interactions are modeled down to time intervals as short as 1-second. Another practical issue is that the size and complexity of typical distribution systems makes direct integration with transmission models computationally intractable. Hence, the focus of the next main task is to develop reduced-order controllable models for some of the smart grid assets. In particular, HVAC units, which are a type of Thermostatically Controlled Loads (TCLs), are considered. The reduced-order modeling approach can be extended to other smart grid assets, like water heaters, PVs and PHEVs. Closed-loop control strategies are designed for a population of HVAC units under realistic conditions. The proposed load controller is fully responsive and achieves the control objective without sacrificing the end-use performance. Finally, using the T&D simulation platform, the benefits to the bulk power system are demonstrated by controlling smart grid assets under different demand response closed-loop control strategies.

  12. BioMEMS DeviceBioMEMS Device Integration, PackagingIntegration, Packaging

    E-Print Network [OSTI]

    Rubloff, Gary W.

    BioMEMS DeviceBioMEMS Device Integration, PackagingIntegration, Packaging and Control forandMEMS Device Integration, Packaging andBioMEMS Device Integration, Packaging and Control for Bio Nonpermanent sealing provides ex situ, post-process analysis Reusable packaging components Microfluidic Control

  13. AANNUALNNUAL RREPORTEPORT Integrated Ocean Drilling ProgramIntegrated Ocean Drilling Program

    E-Print Network [OSTI]

    AANNUALNNUAL RREPORTEPORT Integrated Ocean Drilling ProgramIntegrated Ocean Drilling Program U ANNUAL REPORT #12;#12;Integrated Ocean Drilling Program United States Implementing Organization JOI T his Integrated Ocean Drilling Program (IODP)-U.S. Implementing Organization (USIO) Fiscal Year 2006

  14. Integration In this Chapter, we define the integral of real-valued functions on an arbitrary

    E-Print Network [OSTI]

    Hunter, John K.

    CHAPTER 4 Integration In this Chapter, we define the integral of real-valued functions on an arbitrary measure space and derive some of its basic properties. We refer to this integral as the Lebesgue integral, whether or not the domain of the functions is subset of Rn equipped with Lebesgue measure

  15. Integral Modular Categories and Integrality of Quantum Invariants at Roots of Unity of

    E-Print Network [OSTI]

    Masbaum, Gregor

    Integral Modular Categories and Integrality of Quantum Invariants at Roots of Unity of Prime Order G. Masbaum H. Wenzl May 29, 1998 \\Lambda Abstract It is shown how to deduce integrality properties of quantum 3­manifold invari­ ants from the existence of integral subcategories of modular categories

  16. The Riemann Integral I know of some universities in England where the Lebesgue integral is

    E-Print Network [OSTI]

    Hunter, John K.

    Chapter 1 The Riemann Integral I know of some universities in England where the Lebesgue integral is taught in the first year of a mathematics degree instead of the Riemann integral, but I know of no universities in England where students learn the Lebesgue integral in the first year of a mathematics degree

  17. Non-smooth brownian martingales and stochastic integral representations

    E-Print Network [OSTI]

    Wroblewski, David M.

    2007-01-01

    and M. Yor. On stochastic integral representations ofmotion by stochas- tic integrals. Ann. Math. Statist. , 41:Martingales and Stochastic Integral Representations A

  18. Major Risk Factors to the Integrated Facility Disposition Project...

    Office of Environmental Management (EM)

    Major Risk Factors to the Integrated Facility Disposition Project Major Risk Factors to the Integrated Facility Disposition Project The scope of the Integrated Facility Disposition...

  19. Sandia Energy - Solar Energy Grid Integration Systems (SEGIS...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Solar Energy Grid Integration Systems (SEGIS) Home Stationary Power Energy Conversion Efficiency Solar Energy Photovoltaics Grid Integration Solar Energy Grid Integration Systems...

  20. Integration of distributed energy resources. The CERTS Microgrid Concept

    E-Print Network [OSTI]

    2002-01-01

    2001. Integration of Distributed Energy Resources - The C Enew Integration of Distributed Energy Resources - The C E Ron Integration of Distributed Energy Resources The CERTS

  1. MHD Integrated Topping Cycle Project

    SciTech Connect (OSTI)

    Not Available

    1992-07-01

    This eighteenth quarterly technical progress report of the MHD Integrated Topping cycle Project presents the accomplishments during the period November 1, 1991 to January 31, 1992. The precombustor is fully assembled. Manufacturing of all slagging stage components has been completed. All cooling panels were welded in place and the panel/shell gap was filled with RTV. Final combustor assembly is in progress. The low pressure cooling subsystem (LPCS) was delivered to the CDIF. Second stage brazing issues were resolved. The construction of the two anode power cabinets was completed.

  2. Lamp bulb with integral reflector

    DOE Patents [OSTI]

    Levin, Izrail (Silver Spring, MD); Shanks, Bruce (Gaithersburg, MD); Sumner, Thomas L. (Wheaton, MD)

    2001-01-01

    An improved electrodeless discharge lamp bulb includes an integral ceramic reflector as a portion of the bulb envelope. The bulb envelope further includes two pieces, a reflector portion or segment is cast quartz ceramic and a light transmissive portion is a clear fused silica. In one embodiment, the cast quartz ceramic segment includes heat sink fins or stubs providing an increased outside surface area to dissipate internal heat. In another embodiment, the quartz ceramic segment includes an outside surface fused to eliminate gas permeation by polishing.

  3. CMOS Integrated Carbon Nanotube Sensor

    SciTech Connect (OSTI)

    Perez, M. S.; Lerner, B.; Boselli, A.; Lamagna, A. [Grupo MEMS, Comision Nacional de Energia Atomica, Buenos Aires (Argentina); Obregon, P. D. Pareja; Julian, P. M.; Mandolesi, P. S. [Dpto. de Ing. Electrica y de Computadoras, Universidad Nacional del Sur, Bahia Blanca (Argentina); Buffa, F. A. [INTEMA Facultad de Ingenieria, Universidad Nacional de Mar del Plata, Mar del Plata (Argentina)

    2009-05-23

    Recently carbon nanotubes (CNTs) have been gaining their importance as sensors for gases, temperature and chemicals. Advances in fabrication processes simplify the formation of CNT sensor on silicon substrate. We have integrated single wall carbon nanotubes (SWCNTs) with complementary metal oxide semiconductor process (CMOS) to produce a chip sensor system. The sensor prototype was designed and fabricated using a 0.30 um CMOS process. The main advantage is that the device has a voltage amplifier so the electrical measure can be taken and amplified inside the sensor. When the conductance of the SWCNTs varies in response to media changes, this is observed as a variation in the output tension accordingly.

  4. Integrated Solar Thermochemical Reaction System

    Broader source: Energy.gov [DOE]

    This fact sheet describes an integrated solar thermochemical reaction system project awarded under the DOE's 2012 SunShot Concentrating Solar Power R&D award program. The team, led by the Pacific Northwest National Laboratory, is working to develop and demonstrate a high-performance solar thermochemical reaction system in an end-to-end demonstration that produces electricity. A highly efficient solar thermochemical reaction system would allow for 24-hour operation without the need for storage technology, and reductions in total system costs while providing a relatively low-risk deployment option for CSP systems.

  5. Distribution Integrity Management Plant (DIMP)

    SciTech Connect (OSTI)

    Gonzales, Jerome F.

    2012-05-07

    This document is the distribution integrity management plan (Plan) for the Los Alamos National Laboratory (LANL) Natural Gas Distribution System. This Plan meets the requirements of 49 CFR Part 192, Subpart P Distribution Integrity Management Programs (DIMP) for the LANL Natural Gas Distribution System. This Plan was developed by reviewing records and interviewing LANL personnel. The records consist of the design, construction, operation and maintenance for the LANL Natural Gas Distribution System. The records system for the LANL Natural Gas Distribution System is limited, so the majority of information is based on the judgment of LANL employees; the maintenance crew, the Corrosion Specialist and the Utilities and Infrastructure (UI) Civil Team Leader. The records used in this report are: Pipeline and Hazardous Materials Safety Administration (PHMSA) 7100.1-1, Report of Main and Service Line Inspection, Natural Gas Leak Survey, Gas Leak Response Report, Gas Leak and Repair Report, and Pipe-to-Soil Recordings. The specific elements of knowledge of the infrastructure used to evaluate each threat and prioritize risks are listed in Sections 6 and 7, Threat Evaluation and Risk Prioritization respectively. This Plan addresses additional information needed and a method for gaining that data over time through normal activities. The processes used for the initial assessment of Threat Evaluation and Risk Prioritization are the methods found in the Simple, Handy Risk-based Integrity Management Plan (SHRIMP{trademark}) software package developed by the American Pipeline and Gas Agency (APGA) Security and Integrity Foundation (SIF). SHRIMP{trademark} uses an index model developed by the consultants and advisors of the SIF. Threat assessment is performed using questions developed by the Gas Piping Technology Company (GPTC) as modified and added to by the SHRIMP{trademark} advisors. This Plan is required to be reviewed every 5 years to be continually refined and improved. Records for all piping system installed after the effective date of this Plan will be captured and retained in the UI records documentation system. Primary Utility Asbuilts are maintained by Utilities Mapping (UMAP) and additional records are maintained on the N drive. Engineering Change Notices (ECNs) are stored on the N drive under configuration management and kept up by Utilities and Infrastructure Division Office (UI-DO). Records include, at a minimum, the location where new piping and appurtenances are installed and the material of which they are constructed.

  6. Integrity Biofuels | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX E LISTStar2-0057-EA JumpDuimenMakingBiofuels Jump to: navigation, search Name: Integrity

  7. Integrative Biosurveillance at Bio Symposium

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverseIMPACT EVALUATION PLANIs gravity aOverviewISMscientist discusses Integrative

  8. IntegrityGuide_2006.qxd

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverseIMPACT EVALUATION PLANIs gravity aOverviewISMscientist discussesIntegrity

  9. ORISE: Integrated Safety Management (ISM)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformationJesseworkSURVEY UNIVERSE TheForensic ScienceHow to WorkIntegrated Safety

  10. NREL: Wind Research - Grid Integration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformationJessework usesof EnergyY-12WorkingSolarTechnologiesSilverGrid Integration

  11. Grid Integration | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirley Ann JacksonDepartment ofOffice ofofWindUpcomingcanGrid Integration The Wind Program works with

  12. Sandia Energy - Renewable Energy Integration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservation of Fe(II)Geothermal EnergyRenewable Energy Integration Home Stationary Power

  13. Review of Variable Generation Integration Charges

    SciTech Connect (OSTI)

    Porter, K.; Fink, S.; Buckley, M.; Rogers, J.; Hodge, B. M.

    2013-03-01

    The growth of wind and solar generation in the United States, and the expectation of continued growth of these technologies, dictates that the future power system will be operated in a somewhat different manner because of increased variability and uncertainty. A small number of balancing authorities have attempted to determine an 'integration cost' to account for these changes to their current operating practices. Some balancing authorities directly charge wind and solar generators for integration charges, whereas others add integration charges to projected costs of wind and solar in integrated resource plans or in competitive solicitations for generation. This report reviews the balancing authorities that have calculated variable generation integration charges and broadly compares and contrasts the methodologies they used to determine their specific integration charges. The report also profiles each balancing authority and how they derived wind and solar integration charges.

  14. Critical Review of Path Integral Formulation

    E-Print Network [OSTI]

    Takehisa Fujita

    2008-01-13

    The path integral formulation in quantum mechanics corresponds to the first quantization since it is just to rewrite the quantum mechanical amplitude into many dimensional integrations over discretized coordinates $x_n$. However, the path integral expression cannot be connected to the dynamics of classical mechanics, even though, superficially, there is some similarity between them. Further, the field theory path integral in terms of many dimensional integrations over fields does not correspond to the field quantization. We clarify the essential difference between Feynman's original formulation of path integral in QED and the modern version of the path integral method prevailing in lattice field theory calculations, and show that the former can make a correct second quantization while the latter cannot quantize fields at all and its physical meaning is unknown.

  15. Integrally formed radio frequency quadrupole

    SciTech Connect (OSTI)

    Abbott, Steven R.

    1989-01-01

    An improved radio frequency quadrupole (10) is provided having an elongate housing (11) with an elongate central axis (12) and top, bottom and two side walls (13a-d) symmetrically disposed about the axis, and vanes (14a-d) formed integrally with the walls (13a-d), the vanes (14a-d) each having a cross-section at right angles to the central axis (12) which tapers inwardly toward the axis to form electrode tips (15a-d) spaced from each other by predetermined distances. Each of the four walls (13a-d), and the vanes (14a-d) integral therewith, is a separate structural element having a central lengthwise plane (16) passing through the tip of the vane, the walls (13a-d) having flat mounting surfaces (17, 18) at right angles to and parallel to the control plane (16), respectively, which are butted together to position the walls and vane tips relative to each other.

  16. Cosmic radioactivity and INTEGRAL results

    SciTech Connect (OSTI)

    Diehl, Roland [Max Planck Institut für Extraterrestrische Physik, D-85748 Garching, Germany and Excellence Cluster Origin and Evolution of the Universe', D-85748 Garching (Germany)

    2014-05-02

    Gamma-ray lines from radioactive decay of unstable isotopes co-produced by nucleosynthesis in massive stars and supernova have been measured since more than thirty years. Over the past ten years, INTEGRAL complemented the first sky survey made by COMPTEL. The {sup 26}A1 isotope with 1 My decay time had been first direct proof of currently-ongoing nucleosynthesis in our Galaxy. This has now become a tool to study the ?My history of specific source regions, such as massive-star groups and associations in nearby regions which can be discriminated from the galactic-plane background, and the inner Galaxy, where Doppler shifted lines add to the astronomical information about bar and spiral structure. Recent findings suggest that superbubbles show a remarkable asymmetry, on average, in the spiral arms of our galaxy. {sup 60}Fe is co-produced by the sources of {sup 26}A1, and the isotopic ratio from their nucleosynthesis encodes stellar-structure information. Annihilation gamma-rays from positrons in interstellar space show a puzzling bright and extended source region central to our Galaxy, but also may be partly related to nucleosynthesis. {sup 56}Ni and {sup 44}Ti isotope gamma-rays have been used to constrain supernova explosion mechanisms. Here we report latest results using the accumulated multi-year database of INTEGRAL observations, and discuss their astrophysical interpretations, connecting to other traces of cosmic radioactivity and to other cosmic messengers.

  17. Global atmospheric chemistry: Integrating over fractional cloud cover

    E-Print Network [OSTI]

    Neu, Jessica L; Prather, Michael J; Penner, Joyce E

    2007-01-01

    trace gases and atmospheric chemistry, in Climate Change2007 Global atmospheric chemistry: Integrating over2007), Global atmospheric chemistry: Integrating over

  18. Can There Be a General Theory of Fourier Integral Operators?

    E-Print Network [OSTI]

    2012-06-21

    Jun 21, 2012 ... Standard Fourier Integral Operator Theory. •Fourier integral (Lagrangian) distributions and symbol calculus. •FIOs: ops whose Schwartz kernels ...

  19. Vehicle Technologies Office Merit Review 2015: Integrated Computationa...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Integrated Computational Materials Engineering Approach to Development of Lightweight 3GAHSS Vehicle Assembly Vehicle Technologies Office Merit Review 2015: Integrated...

  20. Waste Form Degradation Model Integration for Engineered Materials...

    Office of Environmental Management (EM)

    Waste Form Degradation Model Integration for Engineered Materials Performance Waste Form Degradation Model Integration for Engineered Materials Performance The collaborative...

  1. Wind Integration, Transmission, and Resource Assessment andCharacteri...

    Office of Environmental Management (EM)

    Integration, Transmission, and Resource Assessment and Characterization Projects Wind Integration, Transmission, and Resource Assessment and Characterization Projects This report...

  2. Financing Advanced Biofuels, Biochemicals And Biopower In Integrated...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Financing Advanced Biofuels, Biochemicals And Biopower In Integrated Biorefineries Financing Advanced Biofuels, Biochemicals And Biopower In Integrated Biorefineries Afternoon...

  3. Vehicle Technologies Office Merit Review 2014: Integrated Computationa...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Integrated Computational Materials Engineering Approach to Development of Lightweight 3GAHSS Vehicle Assembly Vehicle Technologies Office Merit Review 2014: Integrated...

  4. 2011 Biomass Program Platform Peer Review: Integrated Biorefineries...

    Office of Environmental Management (EM)

    2011 Biomass Program Platform Peer Review: Integrated Biorefineries 2011 Biomass Program Platform Peer Review: Integrated Biorefineries "This document summarizes the...

  5. Integrated control system and method

    DOE Patents [OSTI]

    Wang, Paul Sai Keat; Baldwin, Darryl; Kim, Myoungjin

    2013-10-29

    An integrated control system for use with an engine connected to a generator providing electrical power to a switchgear is disclosed. The engine receives gas produced by a gasifier. The control system includes an electronic controller associated with the gasifier, engine, generator, and switchgear. A gas flow sensor monitors a gas flow from the gasifier to the engine through an engine gas control valve and provides a gas flow signal to the electronic controller. A gas oversupply sensor monitors a gas oversupply from the gasifier and provides an oversupply signal indicative of gas not provided to the engine. A power output sensor monitors a power output of the switchgear and provide a power output signal. The electronic controller changes gas production of the gasifier and the power output rating of the switchgear based on the gas flow signal, the oversupply signal, and the power output signal.

  6. Integrated risk information system (IRIS)

    SciTech Connect (OSTI)

    Tuxen, L.

    1990-12-31

    The Integrated Risk Information System (IRIS) is an electronic information system developed by the US Environmental Protection Agency (EPA) containing information related to health risk assessment. IRIS is the Agency`s primary vehicle for communication of chronic health hazard information that represents Agency consensus following comprehensive review by intra-Agency work groups. The original purpose for developing IRIS was to provide guidance to EPA personnel in making risk management decisions. This original purpose for developing IRIS was to guidance to EPA personnel in making risk management decisions. This role has expanded and evolved with wider access and use of the system. IRIS contains chemical-specific information in summary format for approximately 500 chemicals. IRIS is available to the general public on the National Library of Medicine`s Toxicology Data Network (TOXNET) and on diskettes through the National Technical Information Service (NTIS).

  7. Applications of Integral Benchmark Data

    SciTech Connect (OSTI)

    Giuseppe Palmiotti; Teruhiko Kugo; Fitz Trumble; Albert C. (Skip) Kahler; Dale Lancaster

    2014-10-09

    The International Reactor Physics Experiment Evaluation Project (IRPhEP) and the International Criticality Safety Benchmark Evaluation Project (ICSBEP) provide evaluated integral benchmark data that may be used for validation of reactor physics / nuclear criticality safety analytical methods and data, nuclear data testing, advanced modeling and simulation, and safety analysis licensing activities. The handbooks produced by these programs are used in over 30 countries. Five example applications are presented in this paper: (1) Use of IRPhEP Data in Uncertainty Analyses and Cross Section Adjustment, (2) Uncertainty Evaluation Methods for Reactor Core Design at JAEA Using Reactor Physics Experimental Data, (3) Application of Benchmarking Data to a Broad Range of Criticality Safety Problems, (4) Cross Section Data Testing with ICSBEP Benchmarks, and (5) Use of the International Handbook of Evaluated Reactor Physics Benchmark Experiments to Support the Power Industry.

  8. Integrated Energy System Dispatch Optimization

    SciTech Connect (OSTI)

    Firestone, Ryan; Stadler, Michael; Marnay, Chris

    2006-06-16

    On-site cogeneration of heat and electricity, thermal and electrical storage, and curtailing/rescheduling demand options are often cost-effective to commercial and industrial sites. This collection of equipment and responsive consumption can be viewed as an integrated energy system(IES). The IES can best meet the sites cost or environmental objectives when controlled in a coordinated manner. However, continuously determining this optimal IES dispatch is beyond the expectations for operators of smaller systems. A new algorithm is proposed in this paper to approximately solve the real-time dispatch optimization problem for a generic IES containing an on-site cogeneration system subject to random outages, limited curtailment opportunities, an intermittent renewable electricity source, and thermal storage. An example demonstrates how this algorithm can be used in simulation to estimate the value of IES components.

  9. Sustainable NREL: From Integration to Innovation

    SciTech Connect (OSTI)

    2015-09-01

    NREL's sustainability practices are integrated throughout the laboratory and are essential to our mission to develop clean energy and energy efficiency technologies and practices, advance related science and engineering, and provide knowledge and innovations to integrate energy systems at all scales. Sustainability initiatives are integrated through our campus, our staff, and our environment allowing NREL to provide leadership in modeling a sustainability energy future for companies, organizations, governments, and communities.

  10. Spent nuclear fuel project integrated schedule plan

    SciTech Connect (OSTI)

    Squires, K.G.

    1995-03-06

    The Spent Nuclear Fuel Integrated Schedule Plan establishes the organizational responsibilities, rules for developing, maintain and status of the SNF integrated schedule, and an implementation plan for the integrated schedule. The mission of the SNFP on the Hanford site is to provide safe, economic, environmentally sound management of Hanford SNF in a manner which stages it to final disposition. This particularly involves K Basin fuel.

  11. Secretarial Memorandum on Integrating Project Management with...

    Energy Savers [EERE]

    Decision Making through the Integration of Program and Project Management with National Environmental Policy Act Compliance." The memo urges better use of existing tools and...

  12. Integrated Nozzle Flow, Spray, Combustion, & Emission Modeling...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Nozzle Flow, Spray, Combustion, & Emission Modeling using KH-ACT Primary Breakup Model & Detailed Chemistry Integrated Nozzle Flow, Spray, Combustion, & Emission Modeling using...

  13. Integrating Deer, Quail and Turkey Habitat 

    E-Print Network [OSTI]

    Lyons, Robert K.; Ginnett, Tim F.

    2001-09-10

    With the proper management strategies, white-tailed deer, bobwhite quail and Rio Grande turkey habitat can be integrated in one wildlife enterprise....

  14. Integrated External Aerodynamic and Underhood Thermal Analysis...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    External Aerodynamic and Underhood Thermal Analysis for Heavy Vehicles Integrated External Aerodynamic and Underhood Thermal Analysis for Heavy Vehicles 2012 DOE Hydrogen and Fuel...

  15. Featured Publications on Integrated Technology Deployment

    Office of Energy Efficiency and Renewable Energy (EERE)

    Information on the analysis and technical assistance conducted through the integrated deployment effort to help various locations around the world address specific energy challenges. Includes case...

  16. Balancing Area Coordination: Efficiently Integrating Renewable...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    integration of variable renewable energy (VRE), such as wind and solar, into power systems. This efficiency is achieved by sharing or coordinating balancing resources and...

  17. Economy Through Product Diversity: Integrated Biorefineries

    SciTech Connect (OSTI)

    2010-03-01

    A general discussion of the integrated biorefinery concept, the Biomass Program's related activities and challenges and specific biorefinery projects being funded through the Program.

  18. Research Integrity | conmgtsys.ornl.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    About ORNL Fact Sheet Brochure Diversity Leadership Team Organization History Honors and Awards Environmental Policy Environmental Aspects Corporate Giving Research Integrity Who...

  19. Gated integrator with signal baseline subtraction

    DOE Patents [OSTI]

    Wang, X.

    1996-12-17

    An ultrafast, high precision gated integrator includes an opamp having differential inputs. A signal to be integrated is applied to one of the differential inputs through a first input network, and a signal indicative of the DC offset component of the signal to be integrated is applied to the other of the differential inputs through a second input network. A pair of electronic switches in the first and second input networks define an integrating period when they are closed. The first and second input networks are substantially symmetrically constructed of matched components so that error components introduced by the electronic switches appear symmetrically in both input circuits and, hence, are nullified by the common mode rejection of the integrating opamp. The signal indicative of the DC offset component is provided by a sample and hold circuit actuated as the integrating period begins. The symmetrical configuration of the integrating circuit improves accuracy and speed by balancing out common mode errors, by permitting the use of high speed switching elements and high speed opamps and by permitting the use of a small integrating time constant. The sample and hold circuit substantially eliminates the error caused by the input signal baseline offset during a single integrating window. 5 figs.

  20. Gated integrator with signal baseline subtraction

    DOE Patents [OSTI]

    Wang, Xucheng (Lisle, IL)

    1996-01-01

    An ultrafast, high precision gated integrator includes an opamp having differential inputs. A signal to be integrated is applied to one of the differential inputs through a first input network, and a signal indicative of the DC offset component of the signal to be integrated is applied to the other of the differential inputs through a second input network. A pair of electronic switches in the first and second input networks define an integrating period when they are closed. The first and second input networks are substantially symmetrically constructed of matched components so that error components introduced by the electronic switches appear symmetrically in both input circuits and, hence, are nullified by the common mode rejection of the integrating opamp. The signal indicative of the DC offset component is provided by a sample and hold circuit actuated as the integrating period begins. The symmetrical configuration of the integrating circuit improves accuracy and speed by balancing out common mode errors, by permitting the use of high speed switching elements and high speed opamps and by permitting the use of a small integrating time constant. The sample and hold circuit substantially eliminates the error caused by the input signal baseline offset during a single integrating window.

  1. Innovative Office Lighting System with Integrated Spectrally...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    an innovative LED office lighting system solution that integrates light delivery, optics, and controls for energy efficiency and occupant health and well-being. The office...

  2. Integrated Solid Waste Management Act (Nebraska)

    Broader source: Energy.gov [DOE]

    This act affirms the state's support for alternative waste management practices, including waste reduction and resource recovery. Each county and municipality is required to file an integrated...

  3. 4.3 Boundary integral equations

    E-Print Network [OSTI]

    2010-10-18

    62. CHAPTER 4. OBSTACLE SCATTERING. 4.3 Boundary integral equations. We introduce the equivalent sources for the Helmholtz equation and establish ...

  4. HOLOMORPHIC ONE FORMS, INTEGRAL AND RATIONAL POINTS ...

    E-Print Network [OSTI]

    2014-09-23

    Abstract The first goal of this paper is to study the question of finiteness of integral points on a cofinite non-compact complex two dimensional ball quotient ...

  5. 1.1 Vector and integral identities

    E-Print Network [OSTI]

    2011-08-23

    In this section we list some notation, vector and integral identities that are com- monly used in the finite element formulation of the boundary-value problems in.

  6. Integration of Demand Side Management, Distributed Generation...

    Open Energy Info (EERE)

    Integration of Demand Side Management, Distributed Generation, Renewable Energy Sources, and Energy Storages: State-of-the-Art Report, Volume 1, Main Report Jump to: navigation,...

  7. Integration and Independent Innovation on a Network

    E-Print Network [OSTI]

    Farrell, Joseph

    2012-01-01

    Integration and Independent Innovation on a Network JosephKeywords: telecom networks, innovation, competition, accesspoint of monopoly. Innovation thrives with many independent

  8. Integrated Renewable Energy and Energy Storage Systems

    E-Print Network [OSTI]

    Integrated Renewable Energy and Energy Storage Systems Prepared for the U.S. Department of Energy and Energy Storage Systems TABLE OF CONTENTS 1

  9. Integrated Vehicle Thermal Management Systems (VTMS) Analysis...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Systems (VTMS) AnalysisModeling Integrated Vehicle Thermal Management Systems (VTMS) AnalysisModeling 2009 DOE Hydrogen Program and Vehicle Technologies Program Annual Merit...

  10. Laboratory scientist discusses Integrative Biosurveillance at...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Biosurveillance Symposium sponsored by Oak Ridge National Laboratory June 12 in Baltimore. Biosurveillance requires the integration of complex data from a variety of sources....

  11. Integrated Computational Materials Engineering (ICME) for Mg...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Project (Part 1) Integrated Computational Materials Engineering (ICME) for Mg: International Pilot Project (Part 1) 2010 DOE Vehicle Technologies and Hydrogen Programs Annual Merit...

  12. Integrated Security System | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Security System A security platform providing multi-layer intrusion detection and security management for a networked energy control systems architecture Integrated...

  13. Advanced Low Temperature Absorption Chiller Module Integrated...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Low Temperature Absorption Chiller Module Integrated with a CHP System at a Distributed Data Center - Presentation by Exergy Partners Corp., June 2011 Advanced Low Temperature...

  14. Incorporating LCA tools in integrated simulation environments

    E-Print Network [OSTI]

    Pal, Vineeta; Papamichael, Konstantinos; Bourassa, Norman; Loffeld, John J.

    2001-01-01

    and Meil, J. K. , "ATHENA™: An LCA Decision Support Tool -in the Proceedings. INCORPORATING LCA TOOLS IN INTEGRATEDof Energy. INCORPORATING LCA TOOLS IN INTEGRATED SIMULATION

  15. Jefferson Lab Project Management & Integrated Planning

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    nuclear physics research. Our focus is to provide project management and integrated planning support across the Lab that is aligned with Lab goals, objectives and guidance....

  16. Integrated Chemical Geothermometry System for Geothermal Exploration

    Broader source: Energy.gov [DOE]

    DOE Geothermal Peer Review 2010 - Presentation. Develop practical and reliable system to predict geothermal reservoir temperatures from integrated chemical analyses of spring and well fluids.

  17. Integrated Data Analysis to expand measurement capability

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Data Analysis to expand measurement capability Whitepaper submitted to DOE Workshop on Integrated Simulations for Magnetic Fusion Energy Sciences Primary topic: F (Data management,...

  18. Overview of Integrated Waste Treatment Unit

    Office of Environmental Management (EM)

    Environmental Management Integrated Waste Treatment Unit Overview Overview for the DOE High Level Waste Corporate Board March 5, 2009 safety performance cleanup closure...

  19. Wind Integration National Dataset (WIND) Toolkit

    Office of Energy Efficiency and Renewable Energy (EERE)

    For utility companies, grid operators and other stakeholders interested in wind energy integration, collecting large quantities of high quality data on wind energy resources is vitally important....

  20. NREL: Energy Systems Integration - Popular Mechanics: Scientists...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Popular Mechanics: Scientists Break This Virtual Power Grid to Save the Real One July 27, 2015 Popular Mechanics describes how NREL's Energy Systems Integration Facility (ESIF)...

  1. Power Electronic Thermal System Performance and Integration ...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Motor Thermal Control Thermal Stress and Reliability for Advanced Power Electronics and Electric Machines Integrated Vehicle Thermal Management...

  2. Eastern Renewable Generation Integration Study (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2014-02-01

    This one-page, two-sided fact sheet provides an overview of the Eastern Renewable Generation and Integration Study process.

  3. Transportation and Stationary Power Integration Workshop: ""An...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ""An Automaker's Views on the Transition to Hydrogen and Fuel Cell Vehicles Transportation and Stationary Power Integration Workshop: ""An Automaker's Views on the Transition to...

  4. Transmission Grid Integration | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    utility operations, engage in transmission planning forums, and model generator output. More information on transmission grid integration is available in the Transmission...

  5. Integrated Surface Engineering for Improving Energy Efficiency...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Surface Engineering for Improving Energy Efficiency Integrated Surface Engineering for Improving Energy Efficiency Presentation from the U.S. DOE Office of Vehicle Technologies...

  6. Systems Integration Research, Development, and Demonstration

    Broader source: Energy.gov [DOE]

    To achieve the SunShot goals, DOE Systems Integration activities are focused on these key research, development, and demonstration areas:

  7. Transportation and Stationary Power Integration with Hydrogen...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    with Hydrogen and Fuel Cell Technology in Connecticut Transportation and Stationary Power Integration with Hydrogen and Fuel Cell Technology in Connecticut Overview of strengths,...

  8. Integrated thin film batteries on silicon

    E-Print Network [OSTI]

    Ariel, Nava

    2005-01-01

    Monolithic integration has been implemented successfully in complementary metal oxide semiconductor (CMOS) technology and led to improved device performance, increased reliability, and overall cost reduction. The next ...

  9. Integral Domains Inside Noetherian Power Series Rings ...

    E-Print Network [OSTI]

    2015-05-21

    Another theme is an analysis of extensions of integral domains R ?? S ...... TOOLS. Flatness is preserved by several standard ring constructions as we record in.

  10. Transportation and Stationary Power Integration Workshop Agenda...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Agenda, October 27, 2008, Phoenix, Arizonia Transportation and Stationary Power Integration Workshop Agenda, October 27, 2008, Phoenix, Arizonia Agenda for the Transportation and...

  11. Transportation and Stationary Power Integration: Workshop Proceedings...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Transportation and Stationary Power Integration Workshop held on October 27, 2008 in Phoenix, Arizona tspiproceedings.pdf More Documents & Publications U.S. DOE Hydrogen and...

  12. Integration of PDEs by differential geometric means

    E-Print Network [OSTI]

    Naghmana Tehseen; Geoff Prince

    2013-02-22

    We use Vessiot theory and exterior calculus to solve partial differential equations(PDEs) of the type uyy = F(x, y,u,ux,uy,uxx,uxy) and associated evolution equations. These equations are represented by the Vessiot distribution of vector fields. We develop and apply an algorithm to find the largest integrable sub-distributions and hence solutions of the PDEs. We then apply the integrating factor technique [19] to integrate this integrable Vessiot sub-distribution. The method is successfully applied to a large class of linear and non-linear PDEs.

  13. Economy Through Product Diversity: Integrated Biorefineries ...

    Energy Savers [EERE]

    establish integrated biorefineries capable of efficiently converting a broad range of biomass feedstocks into affordable biofuels, biopower, and other products. ibrfourpager.pdf...

  14. A certain kind of line integral (called a contour integral) is of primary interest Area integrals don't have many interesting properties (AFAIK)

    E-Print Network [OSTI]

    Kramer, Peter

    A certain kind of line integral (called a contour integral) is of primary interest· Area integrals of integration of complex functions that interacts well with the notion of complex derivative. First some basics from multivariable calculus directly extended to complex functions. Start by just defining the integral

  15. Geomembrane barriers using integral fiber optics to monitor barrier integrity

    DOE Patents [OSTI]

    Staller, G.E.; Wemple, R.P.

    1996-10-22

    This invention provides a geomembrane or geotextile with embedded optical sensors that are used to monitor the status of containment site barriers. Fiber optic strands are used to form the sensors that can detect and monitor conditions at the sites such as breaches, slope creep, subsidence, leachate levels, fires, and types of materials present or leaking from the site. The strands are integral to the membrane or textile materials. The geosynthetic membrane is deployed at the site in a fashion similar to carpet laying. Edges of the membrane or textile are joined to form a liner and the ends of the membrane or textile become the connection zones for obtaining signals from the sensors. A connection interface with a control system to generate Optical Time Delay Response or other light signals for transmission to the optic fiber strands or sensors and also to receive reflected signals from the sensors is included in the system. Software to interpret the sensor signals can be used in the geosynthetic monitoring system. 6 figs.

  16. Geomembrane barriers using integral fiber optics to monitor barrier integrity

    DOE Patents [OSTI]

    Staller, George E. (Albuquerque, NM); Wemple, Robert P. (Albuquerque, NM)

    1996-01-01

    This invention provides a geomembrane or geotextile with embedded optical sensors that are used to monitor the status of containment site barriers. Fiber optic strands are used to form the sensors that can detect and monitor conditions at the sites such as breaches, slope creep, subsidence, leachate levels, fires, and types of materials present or leaking from the site. The strands are integral to the membrane or textile materials. The geosythetic membrane is deployed at the site in a fashion similar to carpet laying. Edges of the membrane or textile are joined to form a liner and the ends of the membrane or textile become the connection zones for obtaining signals from the sensors. A connection interface with a control system to generate Optical Time Delay Response or other light signals for transmission to the optic fiber strands or sensors and also to receive reflected signals from the sensors is included in the system. Software to interpret the sensor signals can be used in the geosythetic monitoring system.

  17. Implementation Guide for Integrating Environmental Management Systems into Integrated Safety Management Systems

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2004-08-20

    This Guide provides guidance to assist DOE sites in identifying those missing environmental management systems elements and integrating them into the site's integrated safety management system. Canceled by DOE N 251.96.

  18. Research Integrity Assurance questions (August 2012; expanded March 2014) Research Integrity & Ethics

    E-Print Network [OSTI]

    Crowther, Paul

    Research Integrity Assurance questions (August 2012; expanded March 2014) Research Integrity & Ethics Research Organisations in receipt of RCUK funding are required to have procedures for governing good research practice, and for investigating and reporting unacceptable research conduct that meet

  19. Calculating Wind Integration Costs: Separating Wind Energy Value from Integration Cost Impacts

    SciTech Connect (OSTI)

    Milligan, M.; Kirby, B.

    2009-07-01

    Accurately calculating integration costs is important so that wind generation can be fairly compared with alternative generation technologies.

  20. MHD Integrated Topping Cycle Project

    SciTech Connect (OSTI)

    Not Available

    1992-02-01

    This fourteenth quarterly technical progress report of the MHD Integrated Topping Cycle Project presents the accomplishments during the period November 1, 1990 to January 31, 1991. Testing of the High Pressure Cooling Subsystem electrical isolator was completed. The PEEK material successfully passed the high temperature, high pressure duration tests (50 hours). The Combustion Subsystem drawings were CADAM released. The procurement process is in progress. An equipment specification and RFP were prepared for the new Low Pressure Cooling System (LPCS) and released for quotation. Work has been conducted on confirmation tests leading to final gas-side designs and studies to assist in channel fabrication.The final cathode gas-side design and the proposed gas-side designs of the anode and sidewall are presented. Anode confirmation tests and related analyses of anode wear mechanisms used in the selection of the proposed anode design are presented. Sidewall confirmation tests, which were used to select the proposed gas-side design, were conducted. The design for the full scale CDIF system was completed. A test program was initiated to investigate the practicality of using Avco current controls for current consolidation in the power takeoff (PTO) regions and to determine the cause of past current consolidation failures. Another important activity was the installation of 1A4-style coupons in the 1A1 channel. A description of the coupons and their location with 1A1 channel is presented herein.

  1. High G MEMS integrated accelerometer

    SciTech Connect (OSTI)

    Davies, B.R.; Barron, C.C.; Montague, S.; Smith, J.H.; Murray, J.R.; Christenson, T.R.; Bateman, V.I.

    1996-12-31

    This paper describes the design and implementation of a surface micromachined accelerometer for measuring very high levels of acceleration (up to 50,000 G). Both the mechanical and electronic portions of the sensor were integrated on a single substrate using a process developed at Sandia National Laboratories. In this process, the mechanical components of the sensor were first fabricated at the bottom of a trench etched into the water substrate. The trench was then filled with oxide and sealed to protect the mechanical components during subsequent microelectronics processing. The wafer surface was then planarized in preparation for CMOS processing using Chemical Mechanical Polishing (CMP). Next, the CMOS electronics were fabricated on areas of the wafer adjacent to the embedded structures. Finally, the mechanical structures were released and the sensor tested. The mechanical structure of the sensor consisted of two polysilicon plate masses suspended by multiple springs (cantilevered beam structures) over corresponding polysilicon plates fixed to the substrate to form two parallel plate capacitors. The first polysilicon plate mass was suspended using compliant springs (cantilever beams) and acted as a variable capacitor during sensor acceleration. The second polysilicon plate mass was suspended using very stiff springs and acted as a fixed capacitor during acceleration. Acceleration was measured by comparing the capacitance of the variable capacitor (compliant suspension) with the fixed capacitance (stiff suspension).

  2. Buried Waste Integrated Demonstration Plan

    SciTech Connect (OSTI)

    Kostelnik, K.M.

    1991-12-01

    This document presents the plan of activities for the Buried Waste Integrated Demonstration (BWID) program which supports the environmental restoration (ER) objectives of the Department of Energy (DOE) Complex. Discussed in this plan are the objectives, organization, roles and responsibilities, and the process for implementing and managing BWID. BWID is hosted at the Idaho National Engineering Laboratory (INEL), but involves participants from throughout the DOE Complex, private industry, universities, and the international community. These participants will support, demonstrate, and evaluate a suite of advanced technologies representing a comprehensive remediation system for the effective and efficient remediation of buried waste. The processes for identifying technological needs, screening candidate technologies for applicability and maturity, selecting appropriate technologies for demonstration, field demonstrating, evaluation of results and transferring technologies to environmental restoration programs are also presented. This document further describes the elements of project planning and control that apply to BWID. It addresses the management processes, operating procedures, programmatic and technical objectives, and schedules. Key functions in support of each demonstration such as regulatory coordination, safety analyses, risk evaluations, facility requirements, and data management are presented.

  3. Integrated Recycling Test Fuel Fabrication

    SciTech Connect (OSTI)

    R.S. Fielding; K.H. Kim; B. Grover; J. Smith; J. King; K. Wendt; D. Chapman; L. Zirker

    2013-03-01

    The Integrated Recycling Test is a collaborative irradiation test that will electrochemically recycle used light water reactor fuel into metallic fuel feedstock. The feedstock will be fabricated into a metallic fast reactor type fuel that will be irradiation tested in a drop in capsule test in the Advanced Test Reactor on the Idaho National Laboratory site. This paper will summarize the fuel fabrication activities and design efforts. Casting development will include developing a casting process and system. The closure welding system will be based on the gas tungsten arc burst welding process. The settler/bonder system has been designed to be a simple system which provides heating and controllable impact energy to ensure wetting between the fuel and cladding. The final major pieces of equipment to be designed are the weld and sodium bond inspection system. Both x-radiography and ultrasonic inspection techniques have been examine experimentally and found to be feasible, however the final remote system has not been designed. Conceptual designs for radiography and an ultrasonic system have been made.

  4. CHAPTER 1 -NUMERICAL INTEGRATION There are many techniques for performing numerical integrations, although no

    E-Print Network [OSTI]

    Boal, David

    . (1992) for further reading. There are several approaches to the integration of differential equationsCHAPTER 1 - NUMERICAL INTEGRATION There are many techniques for performing numerical integrations or numerical calculation of derivatives. Another approach, which we show for completeness in Sec. 1.1, is based

  5. Proportional-Integral-Derivative Control Derivative Filtering and Integral Anti-Windup

    E-Print Network [OSTI]

    Proportional-Integral-Derivative Control with Derivative Filtering and Integral Anti 2015 Neil Avenue, Columbus, OH 43210-1272 March 22, 2002 Abstract First, you will design a proportional controller to meet a given set of specifications. Then, you will design a proportional integral derivative

  6. An Integrated Path Integral and Free-Energy Perturbation-Umbrella Sampling Method for Computing

    E-Print Network [OSTI]

    Minnesota, University of

    An Integrated Path Integral and Free-Energy Perturbation-Umbrella Sampling Method for Computing integral and free-energy perturbation-umbrella sampling (PI-FEP/UM) method for computing kinetic isotope effects is achieved by coupled free-energy perturbation and umbrella sampling for reactions involving

  7. Schema Integration Methodologies for Multidatabases and the Relational Integration Model -Candidacy document

    E-Print Network [OSTI]

    Lawrence, Ramon

    in building a multidatabase is determining and integrating the data from the component database systems collection and integration are rapidly becoming the mostimportant issues in the information systems area into a coherent global view. Automating the extraction and integration of this data is difficult because

  8. Integrated device architectures for electrochromic devices

    DOE Patents [OSTI]

    Frey, Jonathan Mack; Berland, Brian Spencer

    2015-04-21

    This disclosure describes systems and methods for creating monolithically integrated electrochromic devices which may be a flexible electrochromic device. Monolithic integration of thin film electrochromic devices may involve the electrical interconnection of multiple individual electrochromic devices through the creation of specific structures such as conductive pathway or insulating isolation trenches.

  9. Integrated Retail & Wholesale Power System Operation

    E-Print Network [OSTI]

    Tesfatsion, Leigh

    Integrated Retail & Wholesale Power System Operation with Smart-Grid Functionality PIs: Dionysios Retail/Wholesale Power System Operation with Smart-Grid Functionality Project PIs: Dionysios Aliprantis Tesfatsion, "Project Overview: Integrated Retail and Wholesale Power System Operation with Smart-Grid

  10. Integrated Biorefineries: Biofuels, Biopower, and Bioproducts

    SciTech Connect (OSTI)

    2013-05-06

    This fact sheet describes integrated biorefineries and the Program's work with them. A crucial step in developing the U.S. bioindustry is to establish integrated biorefineries capable of efficiently converting a broad range of biomass feedstocks into affordable biofuels, biopower, and other bioproducts.

  11. HARMONIC MAPS AND INTEGRABLE SYSTEMS EMMA CARBERRY

    E-Print Network [OSTI]

    Sydney, University of

    HARMONIC MAPS AND INTEGRABLE SYSTEMS EMMA CARBERRY Abstract. This article has two purposes. The first is to give an ex- pository account of the integrable systems approach to harmonic maps from surfaces to Lie groups and symmetric spaces, focusing on spectral curves for harmonic 2-tori. The most

  12. Research Article Using Ontologies for Integrated

    E-Print Network [OSTI]

    Camara, Gilberto

    Research Article Using Ontologies for Integrated Geographic Information Systems Frederico T Fonseca. The proposed solution is an ontology-driven geographic information system that acts as a system integrator of the system. Special emphasis is given to the case of remote sensing systems and geographic information

  13. HANDBOOK OF INTEGRATED RISK MANAGEMENT IN

    E-Print Network [OSTI]

    Aydin, Goker

    HANDBOOK OF INTEGRATED RISK MANAGEMENT IN GLOBAL SUPPLY CHAINS Onur Boyabatli Lee Kong Chian School SUPPLY RISK MANAGEMENT G¨oker Aydin1 , Volodymyr Babich2 , Damian Beil3 , and Zhibin Yang4 1 Kelley of Integrated Risk Management in Global Supply Chains. By Boyabatli, Dong, Kouvelis and Li Copyright c 2010 John

  14. ITERATED INTEGRALS OF SUPERCONNECTIONS KIYOSHI IGUSA

    E-Print Network [OSTI]

    Igusa, Kiyoshi

    ITERATED INTEGRALS OF SUPERCONNECTIONS KIYOSHI IGUSA Abstract. Starting with a Z-graded superconnection on a graded vector bun- dle over a smooth manifold M, we show how Chen's iterated integration of such a superconnection over smooth simplices in M gives an A functor if and only if the superconnection is flat

  15. Integrated Planning for Water and Energy Systems

    E-Print Network [OSTI]

    Keller, Arturo A.

    % Agriculture 77% #12;Urban Water UsesUrban Water Uses #12;IrrigationIrrigation Control Benefits #12;IrrigationIntegrated Planning for Water and Energy Systems Integrated Planning for Water and Energy Systems Wilkinson, Ph.D. Director, Water Policy Program Bren School of Environmental Science and Management

  16. Channel Routing for Integrated Optics Christopher Condrat

    E-Print Network [OSTI]

    Kalla, Priyank

    Channel Routing for Integrated Optics Christopher Condrat (chris@g6net.com) Priyank Kalla (kalla, Salt Lake City, UT, USA Abstract--Increasing scope and applications of integrated optics necessitates the development of automated techniques for physical design of optical systems. This paper presents an automated

  17. The contribution of INTEGRAL to blazar science

    E-Print Network [OSTI]

    Luigi Foschini; Valentina Bianchin

    2008-10-29

    We review 6 years of INTEGRAL observations of blazars, from Target-Of-Opportunity (TOO) to normal observations to coordinated campaigns, from the new and unexpected discoveries to the improvements in this research field. We also shortly review what is expected from INTEGRAL for the forthcoming years.

  18. General Electric Company Oahu Wind Integration Study

    E-Print Network [OSTI]

    General Electric Company Oahu Wind Integration Study Final Report Delivered to: Richard Rocheleau dependent state in the nation. In 2008 this cost the state approximately $8.4 billion each year, which to integrate 400 MW of wind power located on the islands of Molokai and/or Lanai that could be transmitted

  19. Development and Integration Issues and Solutions

    E-Print Network [OSTI]

    renewable energy nowadays Wind forecast and use in reserve calculation Influence of wind power on balancing in reserve calculation Influence of wind power on balancing reserves Probabilistic sizing of reserves RealWind Development and Integration Issues and Solutions The Northwest Wind Integration Forum Portland

  20. Microfluidic Large-Scale Integration: The Evolution

    E-Print Network [OSTI]

    Quake, Stephen R.

    Microfluidic Large-Scale Integration: The Evolution of Design Rules for Biological Automation, polydimethylsiloxane Abstract Microfluidic large-scale integration (mLSI) refers to the develop- ment of microfluidic, are discussed. Several microfluidic components used as building blocks to create effective, complex, and highly

  1. UNLV FINANCE DEPARTMENT ACADEMIC INTEGRITY POLICY

    E-Print Network [OSTI]

    Ahmad, Sajjad

    UNLV FINANCE DEPARTMENT ACADEMIC INTEGRITY POLICY Academic integrity and ethical behavior are cornerstones of a high quality educational environment and the Finance Department fully embraces the University dishonesty will be kept in the Finance Department. An individual with a second violation of our academic

  2. Investigating a Breach of Research Integrity Classification

    E-Print Network [OSTI]

    Calgary, University of

    hi Investigating a Breach of Research Integrity Classification Research Table of Contents Purpose 1 of this procedure is to outline the process by which an allegation of a breach of Research integrity, as defined, post- doctoral fellows, and any other person who conducts research under the auspices or jurisdiction

  3. Structural composites with integrated electromagnetic functionality

    E-Print Network [OSTI]

    Nemat-Nasser, Sia

    , such as wires, into polymer-based or ceramic-based composites. In addition to desired structural properties of composites based on the integration of artificial plasmon media into polymer matrixes. Such composites canStructural composites with integrated electromagnetic functionality Syrus C. Nemat-Nasser, Alireza

  4. A New Stabilized Nodal Integration Approach

    SciTech Connect (OSTI)

    Puso, M; Zywicz, E; Chen, J S

    2006-02-08

    A new stabilized nodal integration scheme is proposed and implemented. In this work, focus is on the natural neighbor meshless interpolation schemes. The approach is a modification of the stabilized conforming nodal integration (SCNI) scheme and is shown to perform well in several benchmark problems.

  5. Integration of Storage Devices into Power Systems

    E-Print Network [OSTI]

    and renewable source of energy with zero fuel costs. However, wind generation outputs are highly variableIntegration of Storage Devices into Power Systems with Renewable Energy Sources Final Project System #12;Integration of Storage Devices into Power Systems with Renewable Energy Sources Final Project

  6. Analytical Study of Thermonuclear Reaction Probability Integrals

    E-Print Network [OSTI]

    M. A. Chaudhry; H. J. Haubold; A. M. Mathai

    2000-01-16

    An analytic study of the reaction probability integrals corresponding to the various forms of the slowly varying cross-section factor $S(E)$ is attempted. Exact expressions for reaction probability integrals are expressed in terms of the extended gamma functions.

  7. On the Topic of Motion Integrals 

    E-Print Network [OSTI]

    Bertinato, Christopher

    2013-04-02

    An integral of motion is a function of the states of a dynamical system that is constant along the system’s trajectories. Integrals are known for their utility as a means of reducing the dimension of a system, effectively leaving only one...

  8. Power Systems Integration Laboratory (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01

    This fact sheet describes the purpose, lab specifications, applications scenarios, and information on how to partner with NREL's Power Systems Integration Laboratory at the Energy Systems Integration Facility. At NREL's Power Systems Integration Laboratory in the Energy Systems Integration Facility (ESIF), research focuses on developing and testing large-scale distributed energy systems for grid-connected, stand-alone, and microgrid applications. The laboratory can accommodate large power system components such as inverters for photovoltaic (PV) and wind systems, diesel and natural gas generators, battery packs, microgrid interconnection switchgear, and vehicles. Closely coupled with the research electrical distribution bus at the ESIF, the Power Systems Integration Laboratory will offer power testing capability of megawatt-scale DC and AC power systems, as well as advanced hardware-in-the-loop and model-in-the-loop simulation capabilities. Thermal heating and cooling loops and fuel also allow testing of combined heating/cooling and power systems (CHP).

  9. CBP PHASE I CODE INTEGRATION

    SciTech Connect (OSTI)

    Smith, F.; Brown, K.; Flach, G.; Sarkar, S.

    2011-09-30

    The goal of the Cementitious Barriers Partnership (CBP) is to develop a reasonable and credible set of software tools to predict the structural, hydraulic, and chemical performance of cement barriers used in nuclear applications over extended time frames (greater than 100 years for operating facilities and greater than 1000 years for waste management). The simulation tools will be used to evaluate and predict the behavior of cementitious barriers used in near surface engineered waste disposal systems including waste forms, containment structures, entombments, and environmental remediation. These cementitious materials are exposed to dynamic environmental conditions that cause changes in material properties via (i) aging, (ii) chloride attack, (iii) sulfate attack, (iv) carbonation, (v) oxidation, and (vi) primary constituent leaching. A set of state-of-the-art software tools has been selected as a starting point to capture these important aging and degradation phenomena. Integration of existing software developed by the CBP partner organizations was determined to be the quickest method of meeting the CBP goal of providing a computational tool that improves the prediction of the long-term behavior of cementitious materials. These partner codes were selected based on their maturity and ability to address the problems outlined above. The GoldSim Monte Carlo simulation program (GTG 2010a, GTG 2010b) was chosen as the code integration platform (Brown & Flach 2009b). GoldSim (current Version 10.5) is a Windows based graphical object-oriented computer program that provides a flexible environment for model development (Brown & Flach 2009b). The linking of GoldSim to external codes has previously been successfully demonstrated (Eary 2007, Mattie et al. 2007). GoldSim is capable of performing deterministic and probabilistic simulations and of modeling radioactive decay and constituent transport. As part of the CBP project, a general Dynamic Link Library (DLL) interface was developed to link GoldSim with external codes (Smith III et al. 2010). The DLL uses a list of code inputs provided by GoldSim to create an input file for the external application, runs the external code, and returns a list of outputs (read from files created by the external application) back to GoldSim. In this way GoldSim provides: (1) a unified user interface to the applications, (2) the capability of coupling selected codes in a synergistic manner, and (3) the capability of performing probabilistic uncertainty analysis with the codes. GoldSim is made available by the GoldSim Technology Group as a free 'Player' version that allows running but not editing GoldSim models. The player version makes the software readily available to a wider community of users that would wish to use the CBP application but do not have a license for GoldSim.

  10. Integrated heat pump water heater

    SciTech Connect (OSTI)

    Robinson, G.P.; Blackshaw, A.L.

    1986-07-08

    An integrated heat pump water heater system is described for providing either heating or cooling of an interior space, and heating water in conjunction with either the heating or cooling cycle or independently, by means of a refrigerant flowing through the system. The system consists of: a compressor; a first heat exchanger means for providing heat to the interior space in the heating cycle and for removing heat during the cooling cycle by heat transfer with a refrigerant therein; a second heat exchanger means for transferring heat to or from a refrigerant therein by heat exchanger with an exterior medium; a third heat exchanger means for transferring heat from a refrigerant therein to water circulated therethrough; a first expansion device; a second expansion device; a third expansion device; refrigerant flow connection means connected between the compressor, the heat exchanger means, and the expansion devices which may be controllably connected in alternate configurations whereby. In a first configuration the refrigerant flow is sequentially from the compressor, through the third heat exchanger means, through the second heat exchanger means, through the first expansion device, through the first heat exchanger means, and back to the compressor. In a second configuration the refrigerant flow is sequentially from the compressor, through the third heat exchanger means, through the first heat exchanger means, through the second expansion device, through the second heat exchanger means, and back to the compressor. In a third configuration the refrigerant flow is sequentially from the compressor, through the third heat exchanger means, through the third expansion device, through the second heat exchanger means, and back to the compressor.

  11. A Feynman integral via higher normal functions

    E-Print Network [OSTI]

    Spencer Bloch; Matt Kerr; Pierre Vanhove

    2015-03-26

    We study the Feynman integral for the three-banana graph defined as the scalar two-point self-energy at three-loop order. The Feynman integral is evaluated for all identical internal masses in two space-time dimensions. Two calculations are given for the Feynman integral; one based on an interpretation of the integral as an inhomogeneous solution of a classical Picard-Fuchs differential equation, and the other using arithmetic algebraic geometry, motivic cohomology, and Eisenstein series. Both methods use the rather special fact that the Feynman integral is a family of regulator periods associated to a family of K3 surfaces. We show that the integral is given by a sum of elliptic trilogarithms evaluated at sixth roots of unity. This elliptic trilogarithm value is related to the regulator of a class in the motivic cohomology of the K3 family. We prove a conjecture by David Broadhurst that at a special kinematical point the Feynman integral is given by a critical value of the Hasse-Weil L-function of the K3 surface. This result is shown to be a particular case of Deligne's conjectures relating values of L-functions inside the critical strip to periods.

  12. Deep-sea bioturbation and the role of the sea urchin Echinocrepis rostrata

    E-Print Network [OSTI]

    Vardaro, Michael F.

    2008-01-01

    by a long-term time-lapse camera in the deep North Pacific.Deep-Sea Research I. 54(8): 1231-1240. Vardaro, M.F. ,time-lapse camera in the deep North Pacific. ASLO Aquatic

  13. Hydrocarbon Reservoir Parameter Estimation Using

    E-Print Network [OSTI]

    van Vliet, Lucas J.

    Hydrocarbon Reservoir Parameter Estimation Using Production Data and Time-Lapse Seismic #12;#12;Hydrocarbon Reservoir Parameter Estimation Using Production Data and Time-Lapse Seismic PROEFSCHRIFT ter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.2 Recovery process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.3 Field

  14. Calculation of the RayleighSommerfeld diffraction integral by exact

    E-Print Network [OSTI]

    Calculation of the Rayleigh­Sommerfeld diffraction integral by exact integration of the fast of constant (possibly complex) index of refraction n. The method integrates the Rayleigh­Sommerfeld diffraction integral numerically. After an appropriate change of integration variables, the integrand

  15. Data Integrity Limitations in Highly Secure Systems Cynthia E. Irvine

    E-Print Network [OSTI]

    Irvine, Cynthia E.

    or destruction." [14] A person who has integrity is identified as being one who acts based on a setData Integrity Limitations in Highly Secure Systems Cynthia E. Irvine Department of Computer that is higher in integrity than the integrity level of the COTS components. 1 Introduction Data integrity

  16. Integral equations of scattering in one dimension

    E-Print Network [OSTI]

    Vania E. Barlette; Marcelo M. Leite; Sadhan K. Adhikari

    2001-03-05

    A self-contained discussion of integral equations of scattering is presented in the case of centrally-symmetric potentials in one dimension, which will facilitate the understanding of more complex scattering integral equations in two and three dimensions. The present discussion illustrates in a simple fashion the concept of partial-wave decomposition, Green's function, Lippmann-Schwinger integral equations of scattering for wave function and transition operator, optical theorem and unitarity relation. We illustrate the present approach with a Dirac delta potential.

  17. Path Integral Representations on the Complex Sphere

    E-Print Network [OSTI]

    Christian Grosche

    2007-10-23

    In this paper we discuss the path integral representations for the coordinate systems on the complex sphere S3C. The Schroedinger equation, respectively the path integral, separates in exactly 21 orthogonal coordinate systems. We enumerate these coordinate systems and we are able to present the path integral representations explicitly in the majority of the cases. In each solution the expansion into the wave-functions is stated. Also, the kernel and the corresponding Green function can be stated in closed form in terms of the invariant distance on the sphere, respectively on the hyperboloid.

  18. The Lorentz Integral Transform and its Inversion

    E-Print Network [OSTI]

    N. Barnea; V. D. Efros; W. Leidemann; G. Orlandini

    2009-12-23

    The Lorentz integral transform method is briefly reviewed. The issue of the inversion of the transform, and in particular its ill-posedness, is addressed. It is pointed out that the mathematical term ill-posed is misleading and merely due to a historical misconception. In this connection standard regularization procedures for the solution of the integral transform problem are presented. In particular a recent one is considered in detail and critical comments on it are provided. In addition a general remark concerning the concept of the Lorentz integral transform as a method with a controlled resolution is made.

  19. Chemical preconcentrator with integral thermal flow sensor

    DOE Patents [OSTI]

    Manginell, Ronald P. (Albuquerque, NM); Frye-Mason, Gregory C. (Cedar Crest, NM)

    2003-01-01

    A chemical preconcentrator with integral thermal flow sensor can be used to accurately measure fluid flow rate in a microanalytical system. The thermal flow sensor can be operated in either constant temperature or constant power mode and variants thereof. The chemical preconcentrator with integral thermal flow sensor can be fabricated with the same MEMS technology as the rest of the microanlaytical system. Because of its low heat capacity, low-loss, and small size, the chemical preconcentrator with integral thermal flow sensor is fast and efficient enough to be used in battery-powered, portable microanalytical systems.

  20. Integrated assessment of global warming

    SciTech Connect (OSTI)

    Ott, K.O.

    1996-12-31

    The anomalies of sea surface temperatures, which show a warming trend since the 1850s through the decade 1960/70 of {Delta}SST {approximately} 0.3 C, are complemented by changes of the ground surface temperature ({Delta}GST). The global surface temperature change, based on these data, allows an integrated assessment of the associated increase in black-body irradiance and a comparison with the enhanced greenhouse-gas back-scattering. Information on the GST history is obtained from unfolding analyses of underground temperature distributions measured in 90 boreholes in Alaskan permafrost and Canadian bedrock. These analyses show GST increases ({Delta}GST) since the 19th century through 1960/70 of 3 C on average, with standard deviations of +1.8 C and {minus}0.9 C on the high and low end respectively. The onset of the warming trend, which is uncertain in the GST data, is timed more accurately by detailed length records of large valley glaciers in the US and the Alps. Evaluation of the heat capacities and heat transfer indicates that the temperature response to an increase in radiative forcing must be much larger on land than on the sea. Conversely, the observed large ratio of {Delta}GST and {Delta}SST can only be explained by increased radiative forcing. From 1960/70 through the warmest decade on record, 1980/90, global {Delta}SST and {Delta}SAT have further increased to 0.6 C and 0.8 C respectively, But, the most recent GST data are not accurate enough to extend the comparison through 1990. Calculation of the increase of radiative forcing from back-scattering of greenhouse gases for 1850 to 1970 yields 1.3 W/cm{sup 2}. The increase in black-body irradiance from 3.6 C warming on land and 0.3 C on sea provides the required balance. The warming on land of 3.6 C is larger than the average value of 3.0 C, but well within the observed range.

  1. Maquoketa Shale Caprock Integrity Evaluation

    SciTech Connect (OSTI)

    Leetaru, Hannes

    2014-09-30

    The Knox Project objective is to evaluate the potential of formations within the Cambrian-Ordovician strata above the Mt. Simon Sandstone (St. Peter Sandstone and Potosi Dolomite) as potential targets for carbon dioxide (CO2) sequestration in the Illinois and Michigan Basins. The suitability of the St. Peter Sandstone and Potosi Dolomite to serve as reservoirs for CO2 sequestration is discussed in separate reports. In this report the data gathered from the Knox project, the Illinois Basin – Decatur Project (IBDP) and Illinois Industrial Carbon Capture and Sequestration project (IL-ICCS) are used to make some conclusions about the suitability of the Maquoketa shale as a confining layer for CO2 sequestration. These conclusions are then upscaled to basin-wide inferences based on regional knowledge. Data and interpretations (stratigraphic, petrophysical, fractures, geochemical, risk, seismic) applicable to the Maquoketa Shale from the above mentioned projects was inventoried and summarized. Based on the analysis of these data and interpretations, the Maquoketa Shale is considered to be an effective caprock for a CO2 injection project in either the Potosi Dolomite or St. Peter Sandstone because it has a suitable thickness (~200ft. ~61m), advantageous petrophysical properties (low effective porosity and low permeability), favorable geomechanical properties, an absence of observable fractures and is regionally extensive. Because it is unlikely that CO2 would migrate upward through the Maquoketa Shale, CO2, impact to above lying fresh water aquifers is unlikely. Furthermore, the observations indicate that CO2 injected into the St. Peter Sandstone or Potosi Dolomite may never even migrate up into the Maquoketa Shale at a high enough concentrations or pressure to threaten the integrity of the caprock. Site specific conclusions were reached by unifying the data and conclusions from the IBDP, ICCS and the Knox projects. In the Illinois Basin, as one looks further away from these sites, the formation characteristics are expected to vary. The degree of how well this data can be extrapolated throughout the Basins (regionalized) is difficult to quantify because of the limited amount of data collected on the Maquoketa Shale away from IBDP, IL-ICCS and the Knox projects. Data gathered from the IBDP/IL-ICCS/Knox projects were used to make conclusions about the suitability of the Maquoketa shale as a confining layer for CO2 sequestration. This study indicates that the Maquoketa Shale would be a suitable caprock for a CO2 injection program in either the Potosi Dolomite or St. Peter Sandstone.

  2. Integrated Forest Products Refinery (IFPR)

    SciTech Connect (OSTI)

    van Heiningen, Adriaan R. P.

    2010-05-29

    Pre-extraction–kraft studies of hardwoods showed that when extracting about 10% of the wood, the final kraft pulp yield and physical properties could only be maintained at a level similar to that of regular kraft pulp when the final extract pH was close to neutral. This so-called “near neutral” pre-extraction condition at a level of 10% wood dissolution was achieved by contacting the wood chips with green liquor (GL) at a charge of about 3% (as Na2O on wood) at 160 °C for almost 2 hours (or an H-factor of about 800 hrs.). During subsequent kraft cooking of the pre-extracted hardwood chips the effective alkali charge could be reduced by about 3% (as Na2O on wood) and the cooking time shortened relative to that during regular kraft cooking, while still producing the same bleachable grade kappa number as the kraft control pulp. For softwood, no extraction conditions were discovered in the present investigation whereby both the final kraft pulp yield and physical properties could be maintained at a level similar to that of regular softwood kraft pulp. Therefore for hardwoods the “near- neutral green liquor pre-extraction conditions do meet the requirements of the IFPR concept, while for softwood, no extraction conditions were discovered which do meet these requirements. Application of simulated industrial GL at an extraction H-factor of about 800 hrs and 3% GL charge in a recirculating digester produced an hardwood extract containing about 4% (on wood) of total anhydro-sugars, 2% of acetic acid, and 1.3% of lignin. Xylan comprised of 80% of the sugars of which about 85% is oligomeric. Since only polymeric hemicelluloses and lignin may be adsorbed on pulp (produced at a yield of about 50% from the original wood), the maximum theoretical yield increase due to adsorption may be estimated as 10% on pulp (or 5% on wood). However, direct application of raw GL hardwood extract for hemicelluloses adsorption onto hardwood kraft pulp led to a yield increase of only about 1% (on pulp). By using the wet-end retention aid guar gum during the adsorption process at a charge of 0.5% on pulp the yield gain may be increased to about 5%. Unfortunately, most of this yield increase is lost during subsequent alkaline treatments in the pulp bleach plant. It was found that by performing the adsorption at alkaline conditions the adsorption loss during alkaline treatment in the bleach plant is mostly avoided. Thus a permanent adsorption yield of about 3 and 1.5% (on pulp) was obtained with addition of guar gum at a charge of 0.5 and 0.1% respectively during adsorption of GL hardwood extract on pre-extracted kraft pulp at optimal conditions of pH 11.5, 90 C for 60 minutes at 5% consistency. The beatability of the adsorbed kraft pulps was improved. Also, significant physical strength improvements were achieved. Further study is needed to determine whether the improvements in pulp yield and paper properties make this an economic IFPR concept. Application of the wood solids of a hot water extract of Acer rubrum wood strands as a substitute for polystyrene used for production of SMC maintained the water adsorption properties of the final product. Further work on the physical properties of the hemicellulose containing SMCs need to be completed to determine the potential of wood extracts for the production of partially renewable SMCs. The discovery of the “near-neutral” green liquor extraction process for hardwood was formed the basis for a commercial Integrated Biorefinery that will extract hemicelluloses from wood chips to make biofuels and other specialty chemicals. The pulp production process will be maintained as is proposed in the present researched IFBR concept. This Integrated Biorefinery will be constructed by Red Shield Acquisition LLC (RSA) at the Old Town kraft pulp mill in Maine. RSA in collaboration with the University of Maine will develop and commercialize the hemicellulose extraction process, the conversion of the hemicellulose sugars into butanol by fermentation, and the separation of specialty chemicals such as acetic acid fr

  3. Integrated Pest Management in Greenhouses -Mechanical

    E-Print Network [OSTI]

    Ling, Peter

    Integrated Pest Management in Greenhouses - Mechanical Alternatives Jessica J. Prenger Peter P applications Improving greenhouse production.... Prevention #12;Outline Pest Prevention: Greenhouse design: Efficient greenhouse dehumidification #12;Climate Control in IPM Reducing disease risk Eliminating disease

  4. Integrated Approach to Revamping Heat Exchangers Networks 

    E-Print Network [OSTI]

    Glass, K. E.; Dhole, V.; Wang, Y.

    2002-01-01

    A heat exchanger network constitutes the core of the plant energy systems interlinking the core process operation and the utility systems. This paper will illustrate an integrated approach for the revamp of a heat exchanger network by bringing...

  5. SYNERGIA Forum Integrated Municipal Solid Waste Management

    E-Print Network [OSTI]

    Columbia University

    2nd SYNERGIA Forum «Integrated Municipal Solid Waste Management: Recycling and Energy Change and Solid Waste Management" Anthony Mavropoulos President, Scientific Technical Committee, Chairman, SYNERGIA "Where Greece stands on the Ladder of Sustainable Waste Management " *Nikolaos

  6. Art as integral part of architectural space

    E-Print Network [OSTI]

    Vahtar, Marta

    1993-01-01

    To integrate art with architecture is the intention of every architect. However, many times other requirements overwhelm artistic potential. There are numerous good, simple examples in the history of architecture where ...

  7. REAP Alaska Wind-Integration Workshop

    Office of Energy Efficiency and Renewable Energy (EERE)

    Renewable Energy Alaska Project (REAP) is hosting the Alaska Wind-Integration Workshop. This two-day conference will give attendees the opportunity to learn and share information on wind systems in...

  8. IMPROVED QUASISTEADYSTATEAPPROXIMATION METHODS FOR ATMOSPHERIC CHEMISTRY INTEGRATION #

    E-Print Network [OSTI]

    Jay, Laurent O.

    IMPROVED QUASI­STEADY­STATE­APPROXIMATION METHODS FOR ATMOSPHERIC CHEMISTRY INTEGRATION # L. O. JAY QSSA are presented. Key words. atmospheric chemistry, sti# ordinary di#erential equations, quasi PII. S1064827595283033 1. Introduction. As our scientific understanding of atmospheric chemistry

  9. Integrated decision support model for global sourcing

    E-Print Network [OSTI]

    Mroczkowski, Victor A. (Victor Adam)

    2008-01-01

    Over the last decade, the U.S. aircraft industry has experienced increasing levels of international integration as companies seek to access global talent and resources, cut production costs, spread financial risk, and ...

  10. Photonic integrated circuits for optical logic applications

    E-Print Network [OSTI]

    Williams, Ryan Daniel

    2007-01-01

    The optical logic unit cell is the photonic analog to transistor-transistor logic in electronic devices. Active devices such as InP-based semiconductor optical amplifiers (SOA) emitting at 1550 nm are vertically integrated ...

  11. STRATEGIC PHILANTHROPY INTEGRATING INVESTMENTS IN ASSET BUILDING

    E-Print Network [OSTI]

    Snider, Barry B.

    an effective, integrated, and sustainable system, enabling families to move through safety nets into financial OPPORTUNITY: A family is able to invest in opportunities for mobility when it has enough assets to be secure

  12. INTEGRATING PROJECT MANAGEMENT APPLICATIONS AS WEB SERVICES

    E-Print Network [OSTI]

    Stanford University

    INTEGRATING PROJECT MANAGEMENT APPLICATIONS AS WEB SERVICES Jinxing Cheng1 , Kincho H. Law2 of distributed software applications as Web services. Specifically, information modeling for project management applications as Web services. Specifically, information modeling for project management applications

  13. 11.2 The Integral and Compari

    E-Print Network [OSTI]

    11.2 The Integral and Compari- son Tests. In this section, we assume that all the terms ck in our series are nonnegative. Note that then. IV ll. That is, as 11 gets ...

  14. Efficient Numerical Evaluation of Feynman Integral

    E-Print Network [OSTI]

    Li, Zhao; Yan, Qi-Shu; Zhao, Xiaoran

    2015-01-01

    Feynman loop integral is the key ingredient of high order radiation effect, which is responsible for reliable and accurate theoretical prediction. We improve the efficiency of numerical integration in sector decomposition by implementing quasi-Monte Carlo method associated with the technique of CUDA/GPU. For demonstration we present the results of several Feynman integrals up to two loops in both Euclidean and physical kinematic regions in comparison with those obtained from FIESTA3. It is shown that both planar and non-planar two-loop master integrals in physical kinematic region can be evaluated in less than half minute with $\\mathcal{O}(10^{-3})$ accuracy, which makes the direct numerical approach viable for the precise investigation on the high order effect in multi-loop processes, e.g. the next-to-leading order QCD effect in Higgs pair production via gluon fusion with finite top quark mass.

  15. INTEGRATED OPTIMIZATION AND Marius Stre Govatsmark

    E-Print Network [OSTI]

    Skogestad, Sigurd

    process and an evaporation process. A plantwide control design procedure is applied to a combined cycle power plant and a distil­ lation column heat­integrated with an indirect heat pump. Finally, the thesis

  16. Workshop: Systems Integration Vision Challenges and Opportunities...

    Broader source: Energy.gov (indexed) [DOE]

    30PM PDT Pacific A Even after achieving the SunShot Initiative's cost targets for solar energy, successful systems integration will remain as the key barrier to enable...

  17. Integrated Microinverters for Enabling True ACPV Modules

    Office of Energy Efficiency and Renewable Energy (EERE)

    This project, led by SolarBridge Technologies, is developing an innovative alternating-current photovoltaic (ACPV) module that consists of an integrated "Universal PV-Dock" and a high-reliability,...

  18. Data integrity for on-chip interconnects 

    E-Print Network [OSTI]

    Singhal, Rohit

    2007-09-17

    With shrinking feature size and growing integration density in the Deep Sub- Micron (DSM) technologies, the global buses are fast becoming the "weakest-links" in VLSI design. They have large delays and are error-prone. ...

  19. Update on DOE Integrated Energy Systems Projects 

    E-Print Network [OSTI]

    Williams, T. E., Jr.

    1984-01-01

    The Integrated Energy Systems Program, Office of Industrial Programs U. S. Department of Energy has responsibilities in diverse areas of Industrial Energy Conservation. These activities include Energy Analysis and Diagnostic Centers (EADC) providing...

  20. Biomedical Engineering Biomedical engineering integrates physical, chemical,

    E-Print Network [OSTI]

    Biomedical Engineering Biomedical engineering integrates physical, chemical, mathematical sciences and engineering principles for the study of biology, medicine, behavior, or health. Biomedical engineering, and for improving health. Biomedical engineers design and develop devices and procedures that solve medical

  1. Integrated Brush Management Systems for Texas 

    E-Print Network [OSTI]

    Hanselka, C. Wayne; Hamilton, Wayne T.; Rector, Barron S.

    2001-01-04

    Integrated Brush Management Systems (IBMS) involve careful analysis of range resources and ranch goals in order to develop solutions to brush problems. Successful use of IBMS should result in improved management processes and greater profitability...

  2. Beyond Compliance: Integrating Nonproliferation into Corporate Sustainability

    SciTech Connect (OSTI)

    Hund, Gretchen; Kurzrok, Andrew J.

    2013-06-01

    This paper investigates nonproliferation as a potential corporate sustainability value. It reviews the history of corporate sustainability, builds the case for nonproliferation as a sustainability value, and develops recommendations for the integration of nonproliferation into the frameworks of sustainability.

  3. Building Reconstruction from ALS: Integrating Shape knowledge

    E-Print Network [OSTI]

    Building Reconstruction from ALS: Integrating Shape knowledge and Manual Operation Biao Xiong George Vosselman #12;Introduction Primitive Buildings Constraint Least Square Fit Manual Operation Future work 2 #12;Introduction Primitive Buildings Building Knowledge Constraint Least Square Fit Manual

  4. Integrated electric alternators/active filters 

    E-Print Network [OSTI]

    Abolhassani, Mehdi Towliat

    2004-09-30

    In response to energy crisis and power quality concerns, three different methodologies to integrate the concept of active filtering into the alternators are proposed. Wind energy, due to its free availability and its clean and renewable character...

  5. Carbon nanotube synthesis for integrated circuit interconnects

    E-Print Network [OSTI]

    Nessim, Gilbert Daniel

    2009-01-01

    Based on their properties, carbon nanotubes (CNTs) have been identified as ideal replacements for copper interconnects in integrated circuits given their higher current density, inertness, and higher resistance to ...

  6. Vol 2, Integrated Safety Management System Guide

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1997-12-26

    This Guide provides guidance for addressing the requirements of DOE P 450.4 and DEAR integrated SMS clauses promulgated in 48 CFR 970.5204-2, 48 CFR 970.5204-78, and 48 CFR 970.1001.

  7. Research and design : methods for integration

    E-Print Network [OSTI]

    Ness, Richard E

    1984-01-01

    This study investigates the major factors which inhibit and foster the integration and application of research knowledge with design practice. The results are presented in two parts: Part I, a generic user handbook, and ...

  8. Vol 1, Integrated Safety Management System Guide,

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1997-11-26

    This Guide provides guidance for addressing the requirements of DOE P 450.4 and DEAR integrated SMS clauses promulgated in 48 CFR 970.5204-2, 48 CFR 970.5204-78, and 48 CFR 970.1001.

  9. Statistical Methods for Integrating Genomics Data 

    E-Print Network [OSTI]

    McGuffey, Elizabeth Jennings

    2015-04-16

    membership information and utilizes hierarchical shrinkage to simultaneously select important genes and assign pathway scores. The integration of multiple genomic platforms again allows us to determine which platform is regulating each important gene...

  10. Secretarial Policy Statement on Scientific Integrity

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2014-06-02

    This Secretarial policy statement is intended to enhance our culture by establishing a unified framework for scientific integrity. This policy applies to all DOE Federal employees. This policy will be reviewed annually. Does not cancel/supersede other directives.

  11. Secretarial Policy Statement on Scientific Integrity

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2012-03-23

    Science and Technology are the foundation of all Department of Energy (DOE) activities, so it is essential that we be committed to developing and maintaining a culture that fosters the highest levels of scientific integrity.

  12. A musical wearable : integrating electronics into clothing

    E-Print Network [OSTI]

    Yang, Yang, S.B. Massachusetts Institute of Technology

    2011-01-01

    This project is an art project and a science project. Traditional forms of art - music, dance, fashion - are integrated with new technologies - electronics and software - to create an item of clothing, or "wearable", which ...

  13. Energy Integration Visualization Room (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2012-08-01

    This two-page fact sheet describes the new Energy Integration Visualization Room in the ESIF and talks about some of the capabilities and unique visualization features of the the room.

  14. Integral data analysis for resonance parameters determination

    SciTech Connect (OSTI)

    Larson, N.M.; Leal, L.C.; Derrien, H.

    1997-09-01

    Neutron time-of-flight experiments have long been used to determine resonance parameters. Those resonance parameters have then been used in calculations of integral quantities such as Maxwellian averages or resonance integrals, and results of those calculations in turn have been used as a criterion for acceptability of the resonance analysis. However, the calculations were inadequate because covariances on the parameter values were not included in the calculations. In this report an effort to correct for that deficiency is documented: (1) the R-matrix analysis code SAMMY has been modified to include integral quantities of importance, (2) directly within the resonance parameter analysis, and (3) to determine the best fit to both differential (microscopic) and integral (macroscopic) data simultaneously. This modification was implemented because it is expected to have an impact on the intermediate-energy range that is important for criticality safety applications.

  15. Exploring genomic medicine using integrative biology

    E-Print Network [OSTI]

    Butte, Atul J

    2004-01-01

    Instead of focusing on the cell, or the genotype, or on any single measurement modality, using integrative biology allows us to think holistically and horizontally. A disease like diabetes can lead to myocardial infarction, ...

  16. INTEGRATED RIVER QUALITY MANAGEMENT USING INTERNET TECHNOLOGIES

    E-Print Network [OSTI]

    INTEGRATED RIVER QUALITY MANAGEMENT USING INTERNET TECHNOLOGIES P. Cianchi*, S. Marsili such a computing architecture can be implemented using current internet technologies. Based on the "intelligent a normal web browser. KEYWORDS River water quality, Environmental management, Internet computing, Systems

  17. RFI Well Integrity 06 JUL 1400

    Broader source: Energy.gov [DOE]

    This PowerPoint report entitled "Well Integrity During Shut - In Operations: DOE/DOI Analyses" describes risks and suggests risk management recommendations associated with shutting in the well.

  18. An engine air-brake integration study

    E-Print Network [OSTI]

    Mulchandani, Hiten

    2011-01-01

    The feasibility of operating an engine air-brake (EAB) integrated with a pylon duct bifurcation in a realistic aircraft engine environment has been analyzed. The EAB uses variable exit guide vanes downstream of a high ...

  19. Nebraska Statewide Wind Integration Study: Executive Summary

    SciTech Connect (OSTI)

    EnerNex Corporation, Knoxville, Tennessee; Ventyx, Atlanta, Georgia; Nebraska Power Association, Lincoln, Nebraska

    2010-03-01

    Wind generation resources in Nebraska will play an increasingly important role in the environmental and energy security solutions for the state and the nation. In this context, the Nebraska Power Association conducted a state-wide wind integration study.

  20. On KP-integrable Hurwitz functions

    E-Print Network [OSTI]

    Alexandrov, A; Morozov, A; Natanzon, S

    2014-01-01

    There is now a renewed interest to the Hurwitz tau-function, counting the isomorphism classes of Belyi pairs, arising in the study of equilateral triangulations and Grothiendicks's dessins d'enfant. It is distinguished by belonging to a particular family of Hurwitz tau-functions, possessing conventional Toda/KP integrability properties. We explain how the variety of recent observations about this function fits into the general theory of matrix model tau-functions. All such quantities possess a number of different descriptions, related in a standard way: these include Toda/KP integrability, several kinds of W-representations (we describe four), two kinds of integral (multi-matrix model) descriptions (of Hermitian and Kontsevich types), Virasoro constraints, character expansion, embedding into generic set of Hurwitz tau-functions and relation to knot theory. When approached in this way, the family of models in the literature has a natural extension, and additional integrability with respect to associated new ti...