Powered by Deep Web Technologies
Note: This page contains sample records for the topic "integrated baseline review" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Gated integrator with signal baseline subtraction  

DOE Patents (OSTI)

An ultrafast, high precision gated integrator includes an opamp having differential inputs. A signal to be integrated is applied to one of the differential inputs through a first input network, and a signal indicative of the DC offset component of the signal to be integrated is applied to the other of the differential inputs through a second input network. A pair of electronic switches in the first and second input networks define an integrating period when they are closed. The first and second input networks are substantially symmetrically constructed of matched components so that error components introduced by the electronic switches appear symmetrically in both input circuits and, hence, are nullified by the common mode rejection of the integrating opamp. The signal indicative of the DC offset component is provided by a sample and hold circuit actuated as the integrating period begins. The symmetrical configuration of the integrating circuit improves accuracy and speed by balancing out common mode errors, by permitting the use of high speed switching elements and high speed opamps and by permitting the use of a small integrating time constant. The sample and hold circuit substantially eliminates the error caused by the input signal baseline offset during a single integrating window.

Wang, Xucheng (Lisle, IL)

1996-01-01T23:59:59.000Z

2

Gated integrator with signal baseline subtraction  

DOE Patents (OSTI)

An ultrafast, high precision gated integrator includes an opamp having differential inputs. A signal to be integrated is applied to one of the differential inputs through a first input network, and a signal indicative of the DC offset component of the signal to be integrated is applied to the other of the differential inputs through a second input network. A pair of electronic switches in the first and second input networks define an integrating period when they are closed. The first and second input networks are substantially symmetrically constructed of matched components so that error components introduced by the electronic switches appear symmetrically in both input circuits and, hence, are nullified by the common mode rejection of the integrating opamp. The signal indicative of the DC offset component is provided by a sample and hold circuit actuated as the integrating period begins. The symmetrical configuration of the integrating circuit improves accuracy and speed by balancing out common mode errors, by permitting the use of high speed switching elements and high speed opamps and by permitting the use of a small integrating time constant. The sample and hold circuit substantially eliminates the error caused by the input signal baseline offset during a single integrating window. 5 figs.

Wang, X.

1996-12-17T23:59:59.000Z

3

Integrated Baseline System (IBS) Version 2.0: Utilities Guide  

SciTech Connect

The Integrated Baseline System (IBS) is an emergency management planning and analysis tool being developed under the direction of the US Army Nuclear and Chemical Agency. This Utilities Guide explains how you can use the IBS utility programs to manage and manipulate various kinds of IBS data. These programs include utilities for creating, editing, and displaying maps and other data that are referenced to geographic location. The intended audience for this document are chiefly data managers but also system managers and some emergency management planners and analysts.

Burford, M.J.; Downing, T.R.; Williams, J.R. [Pacific Northwest Lab., Richland, WA (United States); Bower, J.C. [Bower Software Services, Kennewick, WA (United States)

1994-03-01T23:59:59.000Z

4

Integrated Baseline System (IBS) Version 1.03: Utilities guide  

SciTech Connect

The Integrated Baseline System (IBS) is an emergency management planning and analysis tool that was developed under the direction of the Federal Emergency Management Agency (FEMA). This Utilities Guide explains how to operate utility programs that are supplied as a part of the IBS. These utility programs are chiefly for managing and manipulating various kinds of IBS data and system administration files. Many of the utilities are for creating, editing, converting, or displaying map data and other data that are related to geographic location.

Burford, M.J.; Downing, T.R.; Pottier, M.C.; Schrank, E.E.; Williams, J.R.

1993-01-01T23:59:59.000Z

5

Fort Irwin Integrated Resource Assessment. Volume 2, Baseline detail  

SciTech Connect

This report documents the assessment of baseline energy use at Fort Irwin, a US Army Forces Command facility near Barstow, California. It is a companion report to Volume 1, Executive Summary, and Volume 3, Integrated Resource Assessment. The US Army Forces Command (FORSCOM) has tasked the US Department of Energy (DOE) Federal Energy Management Program (FEMP), supported by the Pacific Northwest Laboratory (PNL), to identify, evaluate, and assist in acquiring all cost-effective energy projects at Fort Irwin. This is part of a model program that PNL has designed to support energy-use decisions in the federal sector. This program (1) identifies and evaluates all cost-effective energy projects; (2) develops a schedule at each installation for project acquisition considering project type, size, timing, and capital requirements, as well as energy and dollar savings; and (3) targets 100% of the financing required to implement energy efficiency projects. PNL applied this model program to Fort Irwin. This analysis examines the characteristics of electric, propane gas, and vehicle fuel use for a typical operating year. It records energy-use intensities for the facilities at Fort Irwin by building type and energy end use. It also breaks down building energy consumption by fuel type, energy end use, and building type. A complete energy consumption reconciliation is presented that accounts for all energy use among buildings, utilities, and applicable losses.

Richman, E.E.; Keller, J.M.; Dittmer, A.L.; Hadley, D.L.

1994-01-01T23:59:59.000Z

6

Integration report for SRC-I post-baseline environmental R and D  

SciTech Connect

The Baseline Design for the wastewater treatment/reuse and solid-waste handling and disposal systems for the SRC-I Demonstration Plant was completed in 1982. Because of the ambitious construction schedule contemplated at that time, the design was not based on comprehensive design data. Consequently, since submission of the Baseline, ICRC has been generating experimental data to confirm and/or refine the Baseline Design. This report integrates all the environmental research and development (R and D) data generated during that period by many different R and D programs. 41 references, 29 figures, 32 tables.

Yen, A.F.

1984-06-01T23:59:59.000Z

7

Feed the Future Bangladesh: Baseline Integrated Household Survey | Data.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Feed the Future Bangladesh: Baseline Integrated Household Survey Feed the Future Bangladesh: Baseline Integrated Household Survey Agriculture Community Menu DATA APPS EVENTS DEVELOPER STATISTICS COLLABORATE ABOUT Agriculture You are here Data.gov » Communities » Agriculture » Data Feed the Future Bangladesh: Baseline Integrated Household Survey Dataset Summary Description The Bangladesh Integrated Household Survey dataset is a thorough assessment of current standard of food security in Bangladesh taken from 2011-2012. The dataset includes all baseline household surveys made under the USAID-led Feed the Future initiative, a collaborative effort that supports country-owned processes and plans for improving food security and promoting transparency, and within the Zones of Influence as outlined by the Feed the Future Bangladesh plan .The BIHS sample is statistically representative at the following levels: (a) nationally representative of rural Bangladesh; (b) representative of rural areas of each of the seven administrative divisions of the country; and, (c) representative of the Feed the Future (FTF) zone of influence.

8

Report of the DOE Review Committee on the baseline validation of the Superconducting Super Collider  

Science Conference Proceedings (OSTI)

The Secretary of Energy directed that an independent review of the current cost and schedule baseline for the SSC be conducted. The purpose of this independent review was to validate the current cost and schedule baseline and to ensure that the project status is accurate as currently reported. Through May 1993, approximately $1.5 billion of the baseline cost of $8.249 billion had been expended, with project completion forecasted on the baseline schedule as of September 1999. This report documents the findings of the SSC Baseline Validation Review Committee (the Committee). The report is organized into five parts. The first section is the Executive Summary. This introduction is followed by a discussion of the project progress/status as determined by the Committee. The next section describes the Committee`s estimate of the cost at completion for the SSC project, followed by an assessment of the adequacy of the business management systems currently being used to manage the project. The final section presents the Committee`s conclusions and recommendations. The main body of the report is followed by the subcommittee reports and appendices.

Not Available

1993-08-01T23:59:59.000Z

9

Literature Review for the Baseline Knowledge Assessment of the Hydrogen, Fuel Cells, and Infrastructure Technologies Program  

DOE Green Energy (OSTI)

The purpose of the Hydrogen, Fuel Cells, and Infrastructure Technologies (HFCIT) Program Baseline Knowledge Assessment is to measure the current level of awareness and understanding of hydrogen and fuel cell technologies and the hydrogen economy. This information will be an asset to the HFCIT program in formulating an overall education plan. It will also provide a baseline for comparison with future knowledge and opinion surveys. To assess the current understanding and establish the baseline, the HFCIT program plans to conduct scientific surveys of four target audience groups--the general public, the educational community, governmental agencies, and potential large users. The purpose of the literature review is to examine the literature and summarize the results of surveys that have been conducted in the recent past concerning the existing knowledge and attitudes toward hydrogen. This literature review covers both scientific and, to a lesser extent, non-scientific polls. Seven primary data sources were reviewed, two of which were studies based in Europe. Studies involved both closed-end and open-end questions; surveys varied in length from three questions to multi-page interviews. Populations involved in the studies were primarily adults, although one study involved students. The number of participants ranged from 13 to over 16,000 per study. In addition to the primary surveys, additional related studies were mined for pertinent information. The primary conclusions of the surveys reviewed are that the public knows very little about hydrogen and fuel cell technologies but is generally accepting of the potential for hydrogen use. In general, respondents consider themselves as environmentally conscious. The public considers safety as the primary issue surrounding hydrogen as a fuel. Price, performance, and convenience are also considerations that will have major impacts on purchase decisions.

Truett, L.F.

2003-12-10T23:59:59.000Z

10

Tools for Closure Project and Contract Management: Development of the Rocky Flats Integrated Closure Project Baseline  

Science Conference Proceedings (OSTI)

This paper details the development of the Rocky Flats Integrated Closure Project Baseline - an innovative project management effort undertaken to ensure proactive management of the Rocky Flats Closure Contract in support of the Department's goal for achieving the safe closure of the Rocky Flats Environmental Technology Site (RFETS) in December 2006. The accelerated closure of RFETS is one of the most prominent projects within the Department of Energy (DOE) Environmental Management program. As the first major former weapons plant to be remediated and closed, it is a first-of-kind effort requiring the resolution of multiple complex technical and institutional challenges. Most significantly, the closure of RFETS is dependent upon the shipment of all special nuclear material and wastes to other DOE sites. The Department is actively working to strengthen project management across programs, and there is increasing external interest in this progress. The development of the Rocky Flats Integrated Closure Project Baseline represents a groundbreaking and cooperative effort to formalize the management of such a complex project across multiple sites and organizations. It is original in both scope and process, however it provides a useful precedent for the other ongoing project management efforts within the Environmental Management program.

Gelles, C. M.; Sheppard, F. R.

2002-02-26T23:59:59.000Z

11

Independent Oversight Review of Integrated Safety Management...  

NLE Websites -- All DOE Office Websites (Extended Search)

Enforcement and Oversight Independent Oversight Review of Integrated Safety Management System Effectiveness at the Livermore Site Office October 2011 Office of Safety and Emergency...

12

Integrated Emissions Control -- Process Review Update  

Science Conference Proceedings (OSTI)

This report provides an update of multi-pollutant control processes previously evaluated in EPRI report 1006876, "Integrated Emissions Control -- Process Review."

2002-10-01T23:59:59.000Z

13

Integrated Baseline System (IBS). Version 1.03, System Management Guide  

SciTech Connect

This IBS System Management Guide explains how to install or upgrade the Integrated Baseline System (IBS) software package. The IBS is an emergency management planning and analysis tool that was developed under the direction of the Federal Emergency Management Agency (FEMA). This guide includes detailed instructions for installing the IBS software package on a Digital Equipment Corporation (DEC) VAX computer from the IBS distribution tapes. The installation instructions include procedures for both first-time installations and upgrades to existing IBS installations. To ensure that the system manager has the background necessary for successful installation of the IBS package, this guide also includes information on IBS computer requirements, software organization, and the generation of IBS distribution tapes. When special utility programs are used during IBS installation and setups, this guide refers you to the IBS Utilities Guide for specific instructions. This guide also refers you to the IBS Data Management Guide for detailed descriptions of some IBS data files and structures. Any special requirements for installation are not documented here but should be included in a set of installation notes that come with the distribution tapes.

Williams, J.R. [Pacific Northwest Lab., Richland, WA (United States); Bailey, S. [Innovative Emergency Management, Inc., Baton Rouge, LA (United States); Bower, J.C. [Bower Software Services, Kennewick, Washington (United States)

1993-01-01T23:59:59.000Z

14

Robins Air Force Base Integrated Resource Assessment. Volume 2, Baseline Detail  

Science Conference Proceedings (OSTI)

This report documents the assessment of baseline energy use at Robins Air Force Base (AFB), a US Air Force Materiel Command facility located near Macon, Georgia. This is a companion report to Volume 1, Executive Summary, and Volume 3, Integrated Resource Assessment. The US Air Force Materiel Command (AFMC) has tasked the US Department of Energy (DOE) Federal Energy Management Program (FEMP), supported by the Pacific Northwest Laboratory (PNL), to identify, evaluate, and assist in acquiring all cost-effective energy projects at Robins AFB. This is part of a model program that PNL is designing to support energy-use decisions in the federal sector. This program (1) identifies and evaluates all cost-effective energy projects; (2) develops a schedule at each installation for project acquisition considering project type, size, timing, and capital requirements, as well as energy and dollar savings; and (3) targets 100% of the financing required to implement energy efficiency projects. PNL applied this model program to Robins AFB. The analysis examines the characteristics of electric, natural gas, oil, propane, and wood chip use for fiscal year 1991. The results include energy-use intensities for the facilities at Robins AFB by building type, fuel type, and energy end use. A complete energy consumption reconciliation is presented that accounts for the distribution of all major energy uses and losses among buildings, utilities, and central systems.

Keller, J.M.; Sullivan, G.P.; Wahlstrom, R.R.; Larson, L.L.

1993-08-01T23:59:59.000Z

15

Baseline information development for energy smart schools -- applied research, field testing and technology integration  

SciTech Connect

The original scope of work was to obtain and analyze existing and emerging data in four states: California, Florida, New York, and Wisconsin. The goal of this data collection was to deliver a baseline database or recommendations for such a database that could possibly contain window and daylighting features and energy performance characteristics of Kindergarten through 12th grade (K-12) school buildings (or those of classrooms when available). In particular, data analyses were performed based upon the California Commercial End-Use Survey (CEUS) databases to understand school energy use, features of window glazing, and availability of daylighting in California K-12 schools. The outcomes from this baseline task can be used to assist in establishing a database of school energy performance, assessing applications of existing technologies relevant to window and daylighting design, and identifying future R&D needs. These are in line with the overall project goals as outlined in the proposal. Through the review and analysis of this data, it is clear that there are many compounding factors impacting energy use in K-12 school buildings in the U.S., and that there are various challenges in understanding the impact of K-12 classroom energy use associated with design features of window glazing and skylight. First, the energy data in the existing CEUS databases has, at most, provided the aggregated electricity and/or gas usages for the building establishments that include other school facilities on top of the classroom spaces. Although the percentage of classroom floor area in schools is often available from the databases, there is no additional information that can be used to quantitatively segregate the EUI for classroom spaces. In order to quantify the EUI for classrooms, sub-metering of energy usage by classrooms must be obtained. Second, magnitudes of energy use for electricity lighting are not attainable from the existing databases, nor are the lighting levels contributed by artificial lighting or daylight. It is impossible to reasonably estimate the lighting energy consumption for classroom areas in the sample of schools studied in this project. Third, there are many other compounding factors that may as well influence the overall classroom energy use, e.g., ventilation, insulation, system efficiency, occupancy, control, schedules, and weather. Fourth, although we have examined the school EUI grouped by various factors such as climate zones, window and daylighting design features from the California databases, no statistically significant associations can be identified from the sampled California K-12 schools in the current California CEUS. There are opportunities to expand such analyses by developing and including more powerful CEUS databases in the future. Finally, a list of parameters is recommended for future database development and for use of future investigation in K-12 classroom energy use, window and skylight design, and possible relations between them. Some of the key parameters include: (1) Energy end use data for lighting systems, classrooms, and schools; (2) Building design and operation including features for windows and daylighting; and (3) Other key parameters and information that would be available to investigate overall energy uses, building and systems design, their operation, and services provided.

Xu, Tengfang; Piette, Mary Ann

2004-08-05T23:59:59.000Z

16

Integrating State and Federal Environmental Reviews  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NEPA and CEQA: Integrating State and Federal Environmental Reviews Draft for Public Review and Comment March 2013 2 Table of Contents: I. Introduction ...................................................................................................................................... 3 II. Questions and Answers .................................................................................................................... 5 A. Stage 1: Preliminary Questions ................................................................................................. 5 1. How Does NEPA and CEQA Terminology Differ? .................................................... 5 a. "Action" (NEPA) versus "Project" (CEQA) ................................................ 5

17

Review of Variable Generation Integration Charges  

DOE Green Energy (OSTI)

The growth of wind and solar generation in the United States, and the expectation of continued growth of these technologies, dictates that the future power system will be operated in a somewhat different manner because of increased variability and uncertainty. A small number of balancing authorities have attempted to determine an 'integration cost' to account for these changes to their current operating practices. Some balancing authorities directly charge wind and solar generators for integration charges, whereas others add integration charges to projected costs of wind and solar in integrated resource plans or in competitive solicitations for generation. This report reviews the balancing authorities that have calculated variable generation integration charges and broadly compares and contrasts the methodologies they used to determine their specific integration charges. The report also profiles each balancing authority and how they derived wind and solar integration charges.

Porter, K.; Fink, S.; Buckley, M.; Rogers, J.; Hodge, B. M.

2013-03-01T23:59:59.000Z

18

Mixed Waste Focus Area integrated technical baseline report, Phase 1: Volume 1  

SciTech Connect

The Department of Energy (DOE) established the Mixed Waste Characterization, Treatment, and Disposal Focus Area (MWFA) to develop and facilitate implementation of technologies required to meet the Department`s commitments for treatment of mixed low-level and transuranic wastes. The mission of the MWFA is to provide acceptable treatment systems, developed in partnership with users and with participation of stakeholders, tribal governments, and regulators, that are capable of treating DOE`s mixed waste. These treatment systems include all necessary steps such as characterization, pretreatment, and disposal. To accomplish this mission, a technical baseline is being established that forms the basis for determining which technology development activities will be supported by the MWFA. The technical baseline is the prioritized list of deficiencies, and the resulting technology development activities needed to overcome these deficiencies. This document presents Phase I of the technical baseline development process, which resulted in the prioritized list of deficiencies that the MWFA will address. A summary of the data and the assumptions upon which this work was based is included, as well as information concerning the DOE Office of Environmental Management (EM) mixed waste technology development needs. The next phase in the technical baseline development process, Phase II, will result in the identification of technology development activities that will be conducted through the MWFA to resolve the identified deficiencies.

1996-01-16T23:59:59.000Z

19

MHD Technology Transfer, Integration and Review Committee  

DOE Green Energy (OSTI)

This fifth semi-annual status report of the MHD Technology Transfer, Integration, and Review Committee (TTIRC) summarizes activities of the TTIRC during the period April 1990 through September 1990. It includes summaries and minutes of committee meetings, progress summaries of ongoing Proof-of-Concept (POC) contracts, discussions pertaining to technical integration issues in the POC program, and planned activities for the next six months.

Not Available

1992-01-01T23:59:59.000Z

20

Renewable Diesel from Algal Lipids: An Integrated Baseline for Cost, Emissions, and Resource Potential from a Harmonized Model  

DOE Green Energy (OSTI)

The U.S. Department of Energy's Biomass Program has begun an initiative to obtain consistent quantitative metrics for algal biofuel production to establish an 'integrated baseline' by harmonizing and combining the Program's national resource assessment (RA), techno-economic analysis (TEA), and life-cycle analysis (LCA) models. The baseline attempts to represent a plausible near-term production scenario with freshwater microalgae growth, extraction of lipids, and conversion via hydroprocessing to produce a renewable diesel (RD) blendstock. Differences in the prior TEA and LCA models were reconciled (harmonized) and the RA model was used to prioritize and select the most favorable consortium of sites that supports production of 5 billion gallons per year of RD. Aligning the TEA and LCA models produced slightly higher costs and emissions compared to the pre-harmonized results. However, after then applying the productivities predicted by the RA model (13 g/m2/d on annual average vs. 25 g/m2/d in the original models), the integrated baseline resulted in markedly higher costs and emissions. The relationship between performance (cost and emissions) and either productivity or lipid fraction was found to be non-linear, and important implications on the TEA and LCA results were observed after introducing seasonal variability from the RA model. Increasing productivity and lipid fraction alone was insufficient to achieve cost and emission targets; however, combined with lower energy, less expensive alternative technology scenarios, emissions and costs were substantially reduced.

Davis, R.; Fishman, D.; Frank, E. D.; Wigmosta, M. S.; Aden, A.; Coleman, A. M.; Pienkos, P. T.; Skaggs, R. J.; Venteris, E. R.; Wang, M. Q.

2012-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "integrated baseline review" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

MIT Integrated Global System Model (IGSM) Version 2: Model Description and Baseline Evaluation  

E-Print Network (OSTI)

The MIT Integrated Global System Model (IGSM) is designed for analyzing the global environmental changes that may result from anthropogenic causes, quantifying the uncertainties associated with the projected changes, and ...

Sokolov, Andrei P.

22

Integrated review software advances at Los Alamos  

SciTech Connect

Since 1988, Los Alamos National Laboratory (LANL) has been developing software for unattended monitoring systems. These systems are composed of three categories of software: acquisition, collection and review. The data acquisition software is contained in modular instrumentation distributed throughout facilities to continuously acquire data from devices ranging from radiation detectors to cameras to binary switches. The data collection software runs on computers connected to the instruments and offloads and stores the acquired data. The review software enables the end user to quickly and easily examine the data collected from these different systems and compare the results to declared operator activities. This paper addresses the review software. The original standalone review software processed only radiation data. This software was expanded to include new programs (tools) to display and correlate video and operator declarations and added an interface to the standard neutron coincidence counter analysis program. This expanded review software containing multiple review tools is referred to collectively as the Integrated Review Software (IRS). The IRS continues to expand and evolve. Two primary IRS developments will be described in this paper. First, the IRS was expanded to include review tools to display and analyze new data types. Position Review was developed to display Global Positioning System (GPS) location data to aid in tracking radiation movements. Isotopic Review is being developed to provide a link to the standard gamma isotopic analysis software. In addition significant enhancements are being added to the existing review tools such as Operator Review, Radiation Review and Digital Video Review. A second IRS development is to produce standardized components with published interfaces enabling other parties to produce custom components that plug into review software. It is anticipated that there will be four primary types of components that could be developed by any party: import, analysis, display and report. In addition there are some common manager components that perform the same task for all the IRS review tools. Several import components as well as two manager components have been developed and are now being used in the latest version of the IRS.

Klosterbuer, S. F. (Shirley F.); Michel, K. D. (Kelly D.); Betts, S. E. (Stephen E.); Determan, J. C. (John C.); Longo, J. F. (Joseph F.); Parker, R. F. (Robert F.); Pelowitz, D. G. (David G.); Rothrock, R. B. (Richard B.); Schneider, C. M. (Connie M.); Nordquist, H. M. (Heather M.)

2004-01-01T23:59:59.000Z

23

Patrick Air Force Base integrated resource assessment. Volume 2, Baseline detail  

SciTech Connect

The US Air Force has tasked the Pacific Northwest Laboratory (PNL), in support of the US Department of Energy (DOE) Federal Energy Management Program (FEMP), to assess energy use at Patrick Air Force Base (AFB). The information obtained from this assessment will be used in identifying energy resource opportunities to reduce overall energy consumption on the base. The primary focus of this report is to assess the current baseline energy consumption at Patrick AFB. It is a comparison report to Volume 1, the Executive Summary, and Volume 3, the Resource Assessment. This assessment requires that information be obtained and characterized for buildings, utilities, energy sources, energy uses, and load profile information to be used to improve the characterization of energy use on the base. The characteristics of electricity, natural gas, and No. 2 fuel oil are analyzed for on-base facilities and housing. The assessment examines basic regional information used to determine energy-use intensity (EUI) values for Patrick AFB facilities by building, fuel type, and energy end use. It also provides a summary of electricity consumption from Florida Power and Light Company (FPL) metered data for 1985-1991. Load profile information obtained from FPL data is presented for the north and south substations for the four seasons of the year, including weekdays and weekends.

Wahlstrom, R.R.; King, D.A.; Parker, S.A.; Sandusky, W.F.

1993-08-01T23:59:59.000Z

24

Literature Review for the Baseline Knowledge Assessment of the DOE Hydrogen, Fuel Cells, and Infrastructure Technologies Program.  

NLE Websites -- All DOE Office Websites (Extended Search)

3/258 3/258 LITERATURE REVIEW FOR THE BASELINE KNOWLEDGE ASSESSMENT OF THE HYDROGEN, FUEL CELLS, AND INFRASTRUCTURE TECHNOLOGIES PROGRAM Tykey Truett Center for Transportation Analysis Oak Ridge National Laboratory October 2003 Prepared by the OAK RIDGE NATIONAL LABORATORY Oak Ridge, Tennessee 37831-6073 Managed by UT-BATTELLE, LLC For the U.S. DEPARTMENT OF ENERGY Under contract No. DE-AC05-00OR22725 Prepared for the Hydrogen, Fuel Cells, and Infrastructure Technologies Program Office of Energy Efficiency and Renewable Energy U.S. DEPARTMENT OF ENERGY Washington, D.C. CONTENTS ABSTRACT................................................................................................................. iii ACRONYMS ............................................................................................................... iv

25

Vandenberg Air Force Base integrated resource assessment. Volume 2, Baseline detail  

SciTech Connect

The US Air Force Space Command has tasked the Pacific Northwest Laboratory, as the lead laboratory supporting the US Department of Energy Federal Energy Management Program, to identify, evaluate, and assist in acquiring all cost-effective energy projects at Vandenberg Air Force Base (VAFB). This is a model program PNL is designing for federal customers served by the Pacific Gas and Electric Company (PG and E). The primary goal of the VAFB project is to identify all electric energy efficiency opportunities, and to negotiate with PG and E to acquire those resources through a customized demand-side management program for its federal clients. That customized program should have three major characteristics: (1) 100% up-front financing; (2) substantial utility cost-sharing; and (3) utility implementation through energy service companies under contract to the utility. A similar arrangement will be pursued with Southern California Gas for non-electric resource opportunities if that is deemed desirable by the site and if the gas utility seems open to such an approach. This report documents the assessment of baseline energy use at VAFB located near Lompoc, California. It is a companion report to Volume 1, Executive Summary, and Volume 3, Resource Assessment. This analysis examines the characteristics of electric, natural gas, fuel oil, and propane use for fiscal year 1991. It records energy-use intensities for the facilities at VAFB by building type and energy end use. It also breaks down building energy consumption by fuel type, energy end use, and building type. A more complete energy consumption reconciliation is presented that includes the accounting of all energy use among buildings, utilities, and applicable losses.

Halverson, M.A.; Richman, E.E.; Dagle, J.E.; Hickman, B.J.; Daellenbach, K.K.; Sullivan, G.P.

1993-06-01T23:59:59.000Z

26

CERTS 2012 Program Review - Baselining Studies and Analysis - Bharat Bhargava, EPG  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Song Xue, Prashant Palayam, Mark Woodall Washington, DC June 12-13, 2012 1 Project Objective  Operators monitor power flows at specific interchange points (like Keystone-Juniata). However, power flows may not be a good measure of wide area system stress  Phasor networks provide the capability to monitor in real-time phase angle differences and other power system metrics which are better indicators of wide area system stress  Angle differences can also be correlated with power flows and State Estimator outputs  Research objective is to develop approach for EI baselining using data from different ISOs and establish limits for use in real-time operations  Approach utilized is to use data from state estimation and stressed

27

Development of the environmental management integrated baseline at the Idaho National Engineering Laboratory using systems engineering  

SciTech Connect

The Idaho National Engineering Laboratory (INEL) is one of many Department of Energy (DOE) national laboratories that has been performing environmental cleanup and stabilization, which was accelerated upon the end of the cold war. In fact, the INEL currently receives two-thirds of its scope to perform these functions. However, the cleanup is a highly interactive system that creates an opportunity for systems engineering methodology to be employed. At the INEL, a group called EM (Environmental Management) Integration has been given this charter along with a small core of systems engineers. This paper discusses the progress to date of converting the INEL legacy system into one that uses the systems engineering discipline as the method to ensure that external requirements are met.

Murphy, J.A.; Caliva, R.M.; Wixson, J.R.

1997-10-01T23:59:59.000Z

28

MHD Technology Transfer, Integration and Review Committee  

DOE Green Energy (OSTI)

As part of the MHD Integrated Topping Cycle (ITC) project, TRW was given the responsibility to organize, charter and co-chair, with the Department of Energy (DOE), an MHD Technology Transfer, Integration and Review Committee (TTIRC). The Charter of the TTIRC, which was approved by the DOE in June 1988 and distributed to the committee members, is included as part of this Summary. As stated in the Charter, the purpose of this committee is to: (1) review all Proof-of-Concept (POC) projects and schedules in the national MHD program; to assess their compatibility with each other and the first commercial MHD retrofit plant; (2) establish and implement technology transfer formats for users of this technology; (3) identify interfaces, issues, and funding structures directly impacting the success of the commercial retrofit; (4) investigate and identify the manner in which, and by whom, the above should be resolved; and (5) investigate and assess other participation (foreign and domestic) in the US MHD Program. The DOE fiscal year 1989 MHD Program Plan Schedule is included at the end of this Summary. The MHD Technology Transfer, Integration and Review Committee's activities to date have focused primarily on the technology transfer'' aspects of its charter. It has provided a forum for the dissemination of technical and programmatic information among workers in the field of MHD and to the potential end users, the utilities, by holding semi-annual meetings. The committee publishes this semi-annual report, which presents in Sections 2 through 11 capsule summaries of technical progress for all DOE Proof-of-Concept MHD contracts and major test facilities.

Not Available

1989-10-01T23:59:59.000Z

29

CERTS 2012 Program Review - Baselining Studes and Analysis - Brett Amidan, PNNL  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Analysis Analysis (DOE-CERTS Internal Review) Brett Amidan, M.S. Thomas A. Ferryman, Ph.D. (retired) Trenton Pulsipher, M.S. Spencer Hays, Ph.D. Pacific Northwest National Laboratory brett.amidan@pnnl.gov June 2012 Project Objectives and Relevance Project Objectives Investigate power grid data (PMU and State Estimator Data), including, but not limited to, phase angle differences between site pairs, and mode meter and oscillation derived variables. Identify atypical events and characterize typical patterns. Recommend upper and lower limits for "normal" operation. Relevance Increase understanding of the significance of phase angle differences and other variables as a metric of grid health.

30

A contractor report to the Department of Energy on environmental management baseline programs and integration opportunities (discussion draft)  

Science Conference Proceedings (OSTI)

In July 1996, the US Department of Energy (DOE) Assistant Secretary for Environmental Management (EM) chartered a government contractor led effort to develop a suite of technically defensible, integrated alternatives which meet the EM mission. The contractor team was challenged to ``think outside-the-box`` for solutions that cross traditional site boundaries and enable the programs to get the job done at an earlier date and at a lower cost. This report documents baseline programs current plans for material disposition and presents the opportunities for additional acceleration of cleanup and cost savings. A graphical depiction of the disposition of EM-owned waste and material from current state to final disposition is shown as disposition maps in Attachments 1, 3, 5, 7, 9, and 11. These disposition maps detail the material disposition at eleven major DOE sites as planned in the current discussion draft plan, Accelerating Cleanup: Focus on 2006. Maps reflecting material disposition at additional sites will be added in the future. Opportunities to further accelerate the cleanup of DOE-EM sites and reduce the overall cost of cleanup are depicted in the alternative disposition maps shown in Attachments 2, 4, 6, 8, 10, and 12. These integration opportunities bring nation-wide resources to bear on common problems facing the DOE sites.

NONE

1997-05-01T23:59:59.000Z

31

BPA-Solicited Technical Review of "Echo Meadows Project Winter Artificial Recharge: Final Report for 2001 Baseline", Technical Report 2004.  

DOE Green Energy (OSTI)

The purpose of this report was to provide, at BPA's request, a technical review of interim products received for Project 2001-015-00 under contract 6925. BPA sometimes solicits technical reviews for Fish and Wildlife products or issues where outside expertise is required. External review of complex project deliverables assures BPA as a funding agency that the contractor is continuing with scientifically-credible experimental techniques envisioned in the original proposal. If the project's methodology proves feasible, there could be potential applications beyond the project area to similar situations in the Columbia Basin. The Experiment involves artificial flooding during high flow periods and a determination of the portion of the return flows that end up in the Umatilla River during low flow months and within acceptable water quality parameters (e.g., low temperature, few contaminants). Flooding could be a critical water source for aquatic organisms at times of the year when flows in the lower reaches of the Umatilla River are low and water is warmer than would be desired. The experiment was proposed to test whether 'this process, recharges the shallow aquifers of the old flood plain, for natural filtration through the alluvial soils as it returns to the Umatilla River, cleaner and cooler (about 50 degree Fahrenheit) five to six month later (about July and August) substantially cooling the river and [making it] more beneficial to anadromous [fish]'. A substantial amount of preliminary data had been collected and preliminary results were submitted in an interim report 'Echo Meadows Project Winter Artificial Recharge: Final Report for 2001 Baseline (December 2002)'. A substantial amount of addition funding was provided for the last cycle of flooding (Phases II) and final analyses of the full compliment of data collected over the life of the contract (Phase III). Third party scientific review may assist the contractor in producing a higher quality Final Report with completion of the final 2 phases of the project.

Morgan, David

2004-02-01T23:59:59.000Z

32

NEPA and CEQA: Integrating State and Federal Environmental Reviews...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Governor's Office of Planning and Research, issued on March 5, 2013, a draft handbook on integrating NEPA and California Environmental Quality Act (CEQA) review processes....

33

Integration and Ocean-Based Prelaunch Validation of GOES-R Advanced Baseline Imager Legacy Atmospheric Products  

Science Conference Proceedings (OSTI)

An ocean-based prelaunch evaluation of the Geostationary Operational Environmental Satellite R-series (GOES-R) Advanced Baseline Imager (ABI) legacy atmospheric profile (LAP) products is conducted using proxy data based upon the Spinning Enhanced ...

Hua Xie; Nicholas R. Nalli; Shanna Sampson; Walter W. Wolf; Jun Li; Timothy J. Schmit; Christopher D. Barnet; Everette Joseph; Vernon R. Morris; Fanglin Yang

34

Integration and Ocean-Based Prelaunch Validation of GOES-R Advanced Baseline Imager Legacy Atmospheric Products  

Science Conference Proceedings (OSTI)

An ocean-based prelaunch evaluation of the Geostationary Operational Environmental Satellite (GOES)-R series Advanced Baseline Imager (ABI) legacy atmospheric profile (LAP) products is conducted using proxy data based upon the Spinning Enhanced ...

Hua Xie; Nicholas R. Nalli; Shanna Sampson; Walter W. Wolf; Jun Li; Timothy J. Schmit; Christopher D. Barnet; Everette Joseph; Vernon R. Morris; Fanglin Yang

2013-08-01T23:59:59.000Z

35

Review of the Independent Integrated Safety Management/Integrated...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Los Alamos Site Office NNSA National Nuclear Security Administration PIC Person In Charge R&D Research and Development TA Technical Area 1 Independent Oversight Review of the...

36

book review: An integrative overview on alpine habitats  

E-Print Network (OSTI)

ested general public. The book is largely jargon- free andupdate ISSN 1948-6596 book review An integrative overview onface under global change. The book is organized in eleven

Nogus-Bravo, David

2010-01-01T23:59:59.000Z

37

Review of Major Integrated Energy Policy Report Recommendations  

E-Print Network (OSTI)

#12;#12;#12;#12;#12;#12;#12;#12;#12;1 Review of Major Integrated Energy Policy Report Recommendations In general, I find that the 2004 Integrated Energy Policy Report Update (or Energy Report), inclusive of the 2003 Energy Report, is consistent with my views on energy policy, except as noted otherwise

38

PROGRAM REVIEW Rubric for Assessing the Integration of Student Learning Assessment into Program Reviews  

E-Print Network (OSTI)

to improve their work. Well-qualified internal and external reviewers evaluate the program's learningPROGRAM REVIEW Rubric for Assessing the Integration of Student Learning Assessment into Program Reviews Criterion Initial Emerging Developed Highly Developed Required Elements of the Self-Study Program

39

Renewable and Distributed Systems Integration Peer Review  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

4 4 Denver Marriott West Golden, Colorado AGENDA Tuesday, November 2, 2010 8:00 am Registration and Continental Breakfast 9:00 am-9:10 am Welcome Dr. Robert Hawsey, Associate Laboratory Director for Renewable Electricity and End Use Systems, US DOE-National Renewable Energy Laboratory 9:10 am-9:25 am Overview of Smart Grid Program Eric Lightner, U.S. Department of Energy 9:25 am-9:40 am Overview of Smart Grid Research and Development Activities Dan Ton, U.S. Department of Energy Moderator - Merrill Smith, U.S. Department of Energy 9:40 am-10:10 am University of Hawaii Renewable and Distributed Systems Jay Griffin, University of Hawaii 10:10 am-10:40 am Demonstration of a Coordinated and Integrated System Dennis Sumner, City of Fort Collins

40

A Review of Nondestructive Evaluation Technologies for Cable System Integrity  

Science Conference Proceedings (OSTI)

This report provides an overview of common electrical cable types and designs, damage mechanisms, and existing test methods. It describes a technology review focused on assessing feasibility, performance, and limitations of nondestructive evaluation (NDE) technologies for cable integrity tests and inspection and summarizes future proposed work.BackgroundKnowing a cable systems condition is essential to ensure the reliability of the connected ...

2013-11-21T23:59:59.000Z

Note: This page contains sample records for the topic "integrated baseline review" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Integrated thermal treatment systems study. Internal review panel report  

SciTech Connect

The U.S. Department of Energy (DOE) Office of Technology Development (OTD) commissioned two studies to evaluate nineteen thermal treatment technologies for treatment of DOE mixed low-level waste. These studies were called the Integrated Thermal Treatment System (ITTS) Phase I and Phase II. With the help of the DOE Office of Environmental Management (EM) Mixed Waste Focus Group, OTD formed an ITTS Internal Review Panel to review and comment on the ITTS studies. This Panel was composed of scientists and engineers from throughout the DOE complex, the U.S. Environmental Protection Agency, the California EPA, and private experts. The Panel met from November 15-18, 1994 to review the ITTS studies and to make recommendations on the most promising thermal treatment systems for DOE mixed low-level wastes and on research and development necessary to prove the performance of the technologies. This report describes the findings and presents the recommendations of the Panel.

Cudahy, J.; Escarda, T.; Gimpel, R. [and others

1995-04-01T23:59:59.000Z

42

CyberGIS software: a synthetic review and integration roadmap  

Science Conference Proceedings (OSTI)

CyberGIS defined as cyberinfrastructure-based geographic information systems (GIS) has emerged as a new generation of GIS representing an important research direction for both cyberinfrastructure and geographic information science. This study introduces a 5-year effort funded by the US National Science Foundation to advance the science and applications of CyberGIS, particularly for enabling the analysis of big spatial data, computationally intensive spatial analysis and modeling (SAM), and collaborative geospatial problem-solving and decision-making, simultaneously conducted by a large number of users. Several fundamental research questions are raised and addressed while a set of CyberGIS challenges and opportunities are identified from scientific perspectives. The study reviews several key CyberGIS software tools that are used to elucidate a vision and roadmap for CyberGIS software research. The roadmap focuses on software integration and synthesis of cyberinfrastructure, GIS, and SAM by defining several key integration dimensions and strategies. CyberGIS, based on this holistic integration roadmap, exhibits the following key characteristics: high-performance and scalable, open and distributed, collaborative, service-oriented, user-centric, and community-driven. As a major result of the roadmap, two key CyberGIS modalities gateway and toolkit combined with a community-driven and participatory approach have laid a solid foundation to achieve scientific breakthroughs across many geospatial communities that would be otherwise impossible.

Wang, Shaowen [University of Illinois, Urbana-Champaign; Anselin, Luc [Arizona State University; Bhaduri, Budhendra L [ORNL; Cosby, Christopher [University Navstar Consortium, Boulder, CO; Goodchild, Michael [University of California, Santa Barbara; Liu, Yan [University of Illinois, Urbana-Champaign; Nygers, Timothy L. [University of Washington, Seattle

2013-01-01T23:59:59.000Z

43

Long-Baseline Neutrino Experiment (LBNE) Water Cherenkov Detector Schedule and Cost Books LBNE Far Site Internal Review(December 6-9,2011)  

Science Conference Proceedings (OSTI)

Schedule and Cost Books developed for the Water Cherenkov Detector (WCD) option for the far detector of the Long Baseline Neutrino Experiment (LBNE)

Stewart J.; Diwan, M.; Dolph, J.; Novakova, P.; Sharma, R.; Stewart, J.; Viren, B.; Russo, T.; Kaducak, M.; Mantsch, P.; Paulos, B.; Feyzi, F.; Sullivan, G.; Bionta, R.; Fowler, J.; Warner, D.; Bahowick, S.; Van Berg, R.; Kearns, E.; Hazen, E.; Sinnis, G.; Sanchez, M.

2011-12-09T23:59:59.000Z

44

Long-Baseline Neutrino Experiment (LBNE)Water Cherenkov Detector Basis of Estimate Forms and Backup Documentation LBNE Far Site Internal Review (December 6-9, 2011)  

Science Conference Proceedings (OSTI)

Basis of Estimate (BOE) forms and backup documentation developed for the Water Cherenkov Detector (WCD) option for the far detector of the Long Baseline Neutrino Experiment (LBNE)

Stewart J.; Diwan, M.; Dolph, J.; Novakova, P.; Sharma, R.; Stewart, J.; Viren, B.; Russo, T.; Kaducak, M.; Mantsch, P.; Paulos, B.; Feyzi, F.; Sullivan, G.; Bionta, R.; Fowler, J.; Warner, D.; Bahowick, S.; Van Berg, R.; Kearns, E.; Hazen, E.; Sinnis, G.; Sanchez, M.

2011-12-09T23:59:59.000Z

45

2012 SG Peer Review - Integrated Smart Distribution RD&D Project...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2012 Smart Grid R&D Program Peer Review Meeting DOE - Integrated Smart Distribution RD&D Project S. S. (Mani) Venkata Alstom Grid June 7, 2012 December 2008 DOE Integrated Smart...

46

A review of biomass integrated-gasifier/gas turbine combined cycle technology and its  

E-Print Network (OSTI)

A review of biomass integrated-gasifier/gas turbine combined cycle technology and its application Copersucar, CP 162, Piracicaba, SP ­ Brazil ­ 13400-970 Biomass integrated-gasifier/gas turbine combined-from-sugarcane program. 1. Introduction The biomass integrated-gasifier/gas turbine combined cy- cle (BIG

47

Review of the Sodium Bearing Waste Treatment Project - Integrated...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

IWTU Integrated Waste Treatment Unit LCO Limiting Condition for Operation LSS Life Safety Systems MSA Management Self-Assessment OFI Opportunity for Improvement ORR Operational...

48

Review of the Sodium Bearing Waste Treatment Project - Integrated...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

IWTU Integrated Waste Treatment Unit LCO Limiting Condition for Operation LSS Life Safety Systems MSA Management Self-Assessment OFI Opportunity for Improvement OGC Off-Gas...

49

Review of the Portsmouth Gaseous Diffusion Plant Integrated Safety...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Criteria, Review and Approach Document DNFSB Defense Nuclear Facilities Safety Board DOE U.S. Department of Energy ESH&Q Environment, Safety, Health, and Quality FBP...

50

Idaho National Laboratory Integrated Safety Management System 2010 Effectiveness Review and Declaration Report  

SciTech Connect

Idaho National Laboratory completes an annual Integrated Safety Management System effectiveness review per 48 CFR 970.5223-1 Integration of Environment, Safety and Health into Work Planning and Execution. The annual review assesses ISMS effectiveness, provides feedback to maintain system integrity, and helps identify target areas for focused improvements and assessments for the following year. Using one of the three Department of Energy (DOE) descriptors in DOE M 450.4-1 regarding the state of ISMS effectiveness during Fiscal Year (FY) 2010, the information presented in this review shows that INL achieved Effective Performance.

Thomas J. Haney

2010-12-01T23:59:59.000Z

51

NEPA and CEQA: Integrating State and Federal Environmental Reviews (Draft)  

Energy.gov (U.S. Department of Energy (DOE))

The Council on Environmental Quality (CEQ), incollaboration with the California Governors Office of Planning and Research, issued on March 5, 2013, a draft handbook on integrating NEPA and...

52

Review of Integrated Safety Management System Effectiveness at Lawrence Livermore National Laboratory, September 2011  

NLE Websites -- All DOE Office Websites (Extended Search)

Oversight Review of Oversight Review of Integrated Safety Management System Effectiveness at Lawrence Livermore National Laboratory September 2011 Office of Safety and Emergency Management Evaluations Office of Health, Safety and Security U.S. Department of Energy Table of Contents 1.0 Purpose ................................................................................................................................... 1 2.0 Introduction ............................................................................................................................ 1 3.0 Scope ...................................................................................................................................... 1 4.0 Summary of Results ............................................................................................................... 1

53

Review of Integrated Safety Management System Effectiveness at Lawrence Livermore National Laboratory, September 2011  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Oversight Review of Oversight Review of Integrated Safety Management System Effectiveness at Lawrence Livermore National Laboratory September 2011 Office of Safety and Emergency Management Evaluations Office of Health, Safety and Security U.S. Department of Energy Table of Contents 1.0 Purpose ................................................................................................................................... 1 2.0 Introduction ............................................................................................................................ 1 3.0 Scope ...................................................................................................................................... 1 4.0 Summary of Results ............................................................................................................... 1

54

Idaho National Laboratory Integrated Safety Management System 2011 Effectiveness Review and Declaration Report  

SciTech Connect

Idaho National Laboratory (INL) performed an annual Integrated Safety Management System (ISMS) effectiveness review per 48 Code of Federal Regulations (CFR) 970.5223-1, 'Integration of Environment, Safety and Health into Work Planning and Execution.' The annual review assessed Integrated Safety Management (ISM) effectiveness, provided feedback to maintain system integrity, and helped identify target areas for focused improvements and assessments for fiscal year (FY) 2012. The information presented in this review of FY 2011 shows that the INL has performed many corrective actions and improvement activities, which are starting to show some of the desired results. These corrective actions and improvement activities will continue to help change culture that will lead to better implementation of defined programs, resulting in moving the Laboratory's performance from the categorization of 'Needs Improvement' to the desired results of 'Effective Performance.'

Farren Hunt

2011-12-01T23:59:59.000Z

55

Idaho National Laboratory Integrated Safety Management System 2011 Effectiveness Review and Declaration Report  

SciTech Connect

Idaho National Laboratory (INL) performed an annual Integrated Safety Management System (ISMS) effectiveness review per 48 Code of Federal Regulations (CFR) 970.5223-1, 'Integration of Environment, Safety and Health into Work Planning and Execution.' The annual review assessed Integrated Safety Management (ISM) effectiveness, provided feedback to maintain system integrity, and helped identify target areas for focused improvements and assessments for fiscal year (FY) 2012. The information presented in this review of FY 2011 shows that the INL has performed many corrective actions and improvement activities, which are starting to show some of the desired results. These corrective actions and improvement activities will continue to help change culture that will lead to better implementation of defined programs, resulting in moving the Laboratory's performance from the categorization of 'Needs Improvement' to the desired results of 'Effective Performance.'

Farren Hunt

2011-12-01T23:59:59.000Z

56

Idaho National Laboratory Integrated Safety Management System FY 2012 Effectiveness Review and Declaration Report  

SciTech Connect

Idaho National Laboratory (INL) performed an Annual Effectiveness Review of the Integrated Safety Management System (ISMS), per 48 Code of Federal Regulations (CFR) 970.5223 1, Integration of Environment, Safety and Health into Work Planning and Execution. The annual review assessed Integrated Safety Management (ISM) effectiveness, provided feedback to maintain system integrity, and identified target areas for focused improvements and assessments for fiscal year (FY) 2013. Results of the FY 2012 annual effectiveness review demonstrated that the INLs ISMS program was significantly strengthened. Actions implemented by the INL demonstrate that the overall Integrated Safety Management System is sound and ensures safe and successful performance of work while protecting workers, the public, and environment. This report also provides several opportunities for improvement that will help further strengthen the ISM Program and the pursuit of safety excellence. Demonstrated leadership and commitment, continued surveillance, and dedicated resources have been instrumental in maturing a sound ISMS program. Based upon interviews with personnel, reviews of assurance activities, and analysis of ISMS process implementation, this effectiveness review concludes that ISM is institutionalized and is Effective.

Farren Hunt

2012-12-01T23:59:59.000Z

57

Integrated gasification combined cycle -- A review of IGCC technology  

SciTech Connect

Over the past three decades, significant efforts have been made toward the development of cleaner and more efficient technology for power generation. Coal gasification technology received a big thrust with the concept of combined cycle power generation. The integration of coal gasification with combined cycle for power generation (IGCC) had the inherent characteristic of gas cleanup and waste minimization, which made this system environmentally preferable. Commercial-scale demonstration of a cool water plant and other studies have shown that the greenhouse gas and particulates emission from an IGCC plant is drastically lower than the recommended federal New Source Performance Standard levels. IGCC also offers a phased construction and repowering option, which allows multiple-fuel flexibility and the necessary economic viability. IGCC technology advances continue to improve efficiency and further reduce the emissions, making it the technology of the 21st century.

Joshi, M.M.; Lee, S. [Univ. of Akron, OH (United States)

1996-07-01T23:59:59.000Z

58

Review of the Portsmouth Gaseous Diffusion Plant Integrated Safety Management System Phase I Verification Review, April 2013  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Portsmouth Gaseous Diffusion Plant Portsmouth Gaseous Diffusion Plant Integrated Safety Management System Phase I Verification Review April 2013 Office of Safety and Emergency Management Evaluations Office of Enforcement and Oversight Office of Health, Safety and Security U.S. Department of Energy Table of Contents 1.0 Purpose ................................................................................................................................................. 1 2.0 Scope.................................................................................................................................................... 1 3.0 Background........................................................................................................................................... 1 4.0 Methodology......................................................................................................................................... 1

59

Review of the Portsmouth Gaseous Diffusion Plant Integrated Safety Management System Phase I Verification Review, April 2013  

NLE Websites -- All DOE Office Websites (Extended Search)

Portsmouth Gaseous Diffusion Plant Portsmouth Gaseous Diffusion Plant Integrated Safety Management System Phase I Verification Review April 2013 Office of Safety and Emergency Management Evaluations Office of Enforcement and Oversight Office of Health, Safety and Security U.S. Department of Energy Table of Contents 1.0 Purpose ................................................................................................................................................. 1 2.0 Scope.................................................................................................................................................... 1 3.0 Background........................................................................................................................................... 1 4.0 Methodology......................................................................................................................................... 1

60

241-AW Tank Farm Construction Extent of Condition Review for Tank Integrity  

Science Conference Proceedings (OSTI)

This report provides the results of an extent of condition construction history review for the 241-AW tank farm. The construction history of the 241-AW tank farm has been reviewed to identify issues similar to those experienced during tank AY-102 construction. Those issues and others impacting integrity are discussed based on information found in available construction records, using tank AY-102 as the comparison benchmark. In the 241-AW tank farm, the fourth double-shell tank farm constructed, similar issues as those with tank 241-AY-102 construction occured. The overall extent of similary and affect on 241-AW tank farm integrity is described herein.

Barnes, Travis J.; Gunter, Jason R.; Reeploeg, Gretchen E.

2013-11-19T23:59:59.000Z

Note: This page contains sample records for the topic "integrated baseline review" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

241-AY-101 Tank Construction Extent of Condition Review for Tank Integrity  

Science Conference Proceedings (OSTI)

This report provides the results of an extent of condition construction history review for tank 241-AY-101. The construction history of tank 241-AY-101 has been reviewed to identify issues similar to those experienced during tank AY-102 construction. Those issues and others impacting integrity are discussed based on information found in available construction records, using tank AY-102 as the comparison benchmark. In tank 241-AY-101, the second double-shell tank constructed, similar issues as those with tank 241-AY-102 construction reoccurred. The overall extent of similary and affect on tank 241-AY-101 integrity is described herein.

Barnes, Travis J.; Gunter, Jason R.

2013-08-26T23:59:59.000Z

62

Transportation Baseline Report  

Science Conference Proceedings (OSTI)

The National Transportation Program 1999 Transportation Baseline Report presents data that form a baseline to enable analysis and planning for future Department of Energy (DOE) Environmental Management (EM) waste and materials transportation. In addition, this Report provides a summary overview of DOEs projected quantities of waste and materials for transportation. Data presented in this report were gathered as a part of the IPABS Spring 1999 update of the EM Corporate Database and are current as of July 30, 1999. These data were input and compiled using the Analysis and Visualization System (AVS) which is used to update all stream-level components of the EM Corporate Database, as well as TSD System and programmatic risk (disposition barrier) information. Project (PBS) and site-level IPABS data are being collected through the Interim Data Management System (IDMS). The data are presented in appendices to this report.

Fawcett, Ricky Lee; Kramer, George Leroy Jr.

1999-12-01T23:59:59.000Z

63

Review of the Sodium Bearing Waste Treatment Project - Integrated Waste Treatment Unit Federal Operational Readiness Review  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Federal Operational Readiness Review June 2012 Office of Safety and Emergency Management Evaluations Office of Enforcement and Oversight Office of Health, Safety and Security U.S. Department of Energy i Table of Contents 1.0 Purpose ................................................................................................................................................... 1 2.0 Background ............................................................................................................................................ 1 3.0 Scope ...................................................................................................................................................... 2 4.0 Results ................................................................................................................................................... 2

64

Independent Oversight Review of Integrated Safety Management System Effectiveness at the Livermore Site Office, October 2011  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Office of Enforcement and Oversight Office of Enforcement and Oversight Independent Oversight Review of Integrated Safety Management System Effectiveness at the Livermore Site Office October 2011 Office of Safety and Emergency Management Evaluations Office of Health, Safety and Security U.S. Department of Energy Table of Contents 1.0 Purpose ............................................................................................................................................. 1 2.0 Background ...................................................................................................................................... 1 3.0 Scope ................................................................................................................................................ 1

65

Independent peer review panel report on the integrated nonthermal treatment systems study and the comparison of integrated thermal and integrated nonthermal treatment systems for mixed low level waste  

SciTech Connect

The US Department of Energy`s (DOE) Office of Environmental Management (EM) Office of Science and Technology (OST) has conducted studies of integrated thermal treatment systems and integrated nonthermal treatment systems (INTS) for treating contact handled, alpha and non-alpha mixed low level radioactive waste (MLLW). The MLLW in the DOE complex consists of a wide variety of organic and inorganic solids and liquids contaminated with radioactive substances. Treatment systems are needed to destroy organic material and stabilize residues prior to land disposal. In May 1996 the Deputy Assistant Secretary for OST appointed an Independent Peer Review Panel to: (1) review and comment on the INTS Study; (2) make recommendations on the most promising thermal and nonthermal treatment systems; (3) make recommendations on research and development necessary to prove the performance of nonthermal and thermal technologies; and (4) review and comment on the preliminary draft of the ITTS/INTS Comparison Report. This report presents the primary conclusions and recommendations based on the review of the INTS study and the comparison report. System selection, overviews, comparisons, cost estimations and sensitivity analyses, and recommended R and D engineering needs are then described and discussed.

1996-08-01T23:59:59.000Z

66

Pinellas Plant Environmental Baseline Report  

Science Conference Proceedings (OSTI)

The Pinellas Plant has been part of the Department of Energy`s (DOE) nuclear weapons complex since the plant opened in 1957. In March 1995, the DOE sold the Pinellas Plant to the Pinellas County Industry Council (PCIC). DOE has leased back a large portion of the plant site to facilitate transition to alternate use and safe shutdown. The current mission is to achieve a safe transition of the facility from defense production and prepare the site for alternative uses as a community resource for economic development. Toward that effort, the Pinellas Plant Environmental Baseline Report (EBR) discusses the current and past environmental conditions of the plant site. Information for the EBR is obtained from plant records. Historical process and chemical usage information for each area is reviewed during area characterizations.

Not Available

1997-06-01T23:59:59.000Z

67

241-SY Tank Farm Construction Extent of Condition Review for Tank Integrity  

SciTech Connect

This report provides the results of an extent of condition construction history review for tanks 241-SY-101, 241-SY-102, and 241-SY-103. The construction history of the 241-SY tank farm has been reviewed to identify issues similar to those experienced during tank 241-AY-102 construction. Those issues and others impacting integrity are discussed based on information found in available construction records, using tank 241-AY-102 as the comparison benchmark. In the 241-SY tank farm, the third DST farm constructed, refractory quality and stress relief were improved, while similar tank and liner fabrication issues remained.

Barnes, Travis J.; Boomer, Kayle D.; Gunter, Jason R.; Venetz, Theodore J.

2013-07-25T23:59:59.000Z

68

241-AZ Tank Farm Construction Extent of Condition Review for Tank Integrity  

SciTech Connect

This report provides the results of an extent of condition construction history review for tanks 241-AZ-101 and 241-AZ-102. The construction history of the 241-AZ tank farm has been reviewed to identify issues similar to those experienced during tank AY-102 construction. Those issues and others impacting integrity are discussed based on information found in available construction records, using tank AY-102 as the comparison benchmark. In the 241-AZ tank farm, the second DST farm constructed, both refractory quality and tank and liner fabrication were improved.

Barnes, Travis J.; Boomer, Kayle D.; Gunter, Jason R.; Venetz, Theodore J.

2013-07-30T23:59:59.000Z

69

Re-baselining Report  

NLE Websites -- All DOE Office Websites (Extended Search)

008 008 DOE/NETL-2008/1308 Re-baselining APS, CS & FC GRPA R&D Goals Impact of Cost Escalation on Power System R&D Goals Disclaimer This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference therein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or

70

Baseline Test Specimen Machining Report  

SciTech Connect

The Next Generation Nuclear Plant (NGNP) Project is tasked with selecting a high temperature gas reactor technology that will be capable of generating electricity and supplying large amounts of process heat. The NGNP is presently being designed as a helium-cooled high temperature gas reactor (HTGR) with a large graphite core. The graphite baseline characterization project is conducting the research and development (R&D) activities deemed necessary to fully qualify nuclear-grade graphite for use in the NGNP reactor. Establishing nonirradiated thermomechanical and thermophysical properties by characterizing lot-to-lot and billet-to-billet variations (for probabilistic baseline data needs) through extensive data collection and statistical analysis is one of the major fundamental objectives of the project. The reactor core will be made up of stacks of graphite moderator blocks. In order to gain a more comprehensive understanding of the varying characteristics in a wide range of suitable graphites, any of which can be classified as nuclear grade, an experimental program has been initiated to develop an extensive database of the baseline characteristics of numerous candidate graphites. Various factors known to affect the properties of graphite will be investigated, including specimen size, spatial location within a graphite billet, specimen orientation within a billet (either parallel to [P] or transverse to [T] the long axis of the as-produced billet), and billet-to-billet variations within a lot or across different production lots. Because each data point is based on a certain position within a given billet of graphite, particular attention must be paid to the traceability of each specimen and its spatial location and orientation within each billet. The evaluation of these properties is discussed in the Graphite Technology Development Plan (Windes et. al, 2007). One of the key components in the evaluation of these graphite types will be mechanical testing on specimens drawn from carefully controlled sections of each billet. To this end, this report will discuss the machining of the first set of test specimens that will be evaluated in this program through tensile, compressive, and flexural testing. Validation that the test specimens have been produced to the tolerances required by the applicable ASTM standards, and to the quality control levels required by this program, will demonstrate the viability of sending graphite to selected suppliers that will provide valuable and certifiable data to future data sets that are integral to the NGNP program and beyond.

mark Carroll

2009-08-01T23:59:59.000Z

71

CALIFORNIA ENERGY Large HVAC Field and Baseline Data  

E-Print Network (OSTI)

CALIFORNIA ENERGY COMMISSION Large HVAC Field and Baseline Data Field Data Collection: Site Survey of the Integrated Design of Large Commercial HVAC Systems research project. The reports are a result of funding Design of Large Commercial HVAC Systems Integrated Design of Small Commercial HVAC Systems Integrated

72

Sterile Neutrino Fits to Short-Baseline Neutrino Oscillation Measurements  

E-Print Network (OSTI)

This paper reviews short-baseline oscillation experiments as interpreted within the context of one, two, and three sterile neutrino models associated with additional neutrino mass states in the ~1?eV range. Appearance and ...

Conrad, J. M.

2013-01-01T23:59:59.000Z

73

MHD Technology Transfer, Integration and Review Committee. Second semiannual status report, July 1988--March 1989  

DOE Green Energy (OSTI)

As part of the MHD Integrated Topping Cycle (ITC) project, TRW was given the responsibility to organize, charter and co-chair, with the Department of Energy (DOE), an MHD Technology Transfer, Integration and Review Committee (TTIRC). The Charter of the TTIRC, which was approved by the DOE in June 1988 and distributed to the committee members, is included as part of this Summary. As stated in the Charter, the purpose of this committee is to: (1) review all Proof-of-Concept (POC) projects and schedules in the national MHD program; to assess their compatibility with each other and the first commercial MHD retrofit plant; (2) establish and implement technology transfer formats for users of this technology; (3) identify interfaces, issues, and funding structures directly impacting the success of the commercial retrofit; (4) investigate and identify the manner in which, and by whom, the above should be resolved; and (5) investigate and assess other participation (foreign and domestic) in the US MHD Program. The DOE fiscal year 1989 MHD Program Plan Schedule is included at the end of this Summary. The MHD Technology Transfer, Integration and Review Committee`s activities to date have focused primarily on the ``technology transfer`` aspects of its charter. It has provided a forum for the dissemination of technical and programmatic information among workers in the field of MHD and to the potential end users, the utilities, by holding semi-annual meetings. The committee publishes this semi-annual report, which presents in Sections 2 through 11 capsule summaries of technical progress for all DOE Proof-of-Concept MHD contracts and major test facilities.

Not Available

1989-10-01T23:59:59.000Z

74

Integrated Thermal Treatment Systems study: US Department of Energy Internal Review Panel report  

Science Conference Proceedings (OSTI)

The U.S. Department of Energy`s (DOE) Office of Technology Development (OTD) commissioned two studies to uniformly evaluate nineteen thermal treatment technologies. These studies were called the Integrated Thermal Treatment System (ITTS) Phase I and Phase II. With the advice and guidance of the DOE Office of Environmental Management`s (EM`s) Mixed Waste Focus Group, OTD formed an ITTS Internal Review Panel, composed of scientists and engineers from throughout the DOE complex, the U.S. Environmental Protection Agency (EPA), the California EPA, and private experts. The Panel met from November 15-18, 1994, to review and comment on the ITTS studies, to make recommendations on the most promising thermal treatment systems for DOE mixed low level wastes (MLLW), and to make recommendations on research and development necessary to prove the performance of the technologies on MLLW.

Cudahy, J.; Escarda, T.; Gimpel, R. [and others

1995-04-01T23:59:59.000Z

75

River Protection Project Integrated safety management system phase II verification review plan - 7/29/99  

Science Conference Proceedings (OSTI)

The purpose of this review is to verify the implementation status of the Integrated Safety Management System (ISMS) for the River Protection Project (RPP) facilities managed by Fluor Daniel Hanford, Inc. (FDH) and operated by Lockheed Martin Hanford Company (LMHC). This review will also ascertain whether within RPP facilities and operations the work planning and execution processes are in place and functioning to effectively protect the health and safety of the workers, public, environment, and federal property over the RPP life cycle. The RPP ISMS should support the Hanford Strategic Plan (DOERL-96-92) to safely clean up and manage the site's legacy waste and deploy science and technology while incorporating the ISMS central theme to ''Do work safely'' and protect human health and the environment.

SHOOP, D.S.

1999-09-10T23:59:59.000Z

76

Baseline Change Request  

NLE Websites -- All DOE Office Websites (Extended Search)

performance cleanup closure performance cleanup closure M E Environmental Management Environmental Management Sodium Bearing Waste Treatment Project Overview U. S. Department of Energy Office of Waste Processing Technical Exchange Denver, Colorado May 20, 2009 Keith Lockie, Deputy Federal Project Director 2 safety performance cleanup closure M E Environmental Management Environmental Management 2 Project Mission/Contract * Mission - The Sodium Bearing Waste Treatment Project (also known as the Integrated Waste Treatment Project) mission is to provide treatment of approximately 900,000 gallons of tank farm waste - referred to as sodium bearing waste (SBW) - stored at the Idaho Tank Farm Facility to a stable waste form suitable for disposition at the Waste Isolation Pilot Plant -

77

The Integrated Safety Management System Verification Enhancement Review of the Plutonium Finishing Plant (PFP)  

SciTech Connect

The primary purpose of the verification enhancement review was for the DOE Richland Operations Office (RL) to verify contractor readiness for the independent DOE Integrated Safety Management System Verification (ISMSV) on the Plutonium Finishing Plant (PFP). Secondary objectives included: (1) to reinforce the engagement of management and to gauge management commitment and accountability; (2) to evaluate the ''value added'' benefit of direct public involvement; (3) to evaluate the ''value added'' benefit of direct worker involvement; (4) to evaluate the ''value added'' benefit of the panel-to-panel review approach; and, (5) to evaluate the utility of the review's methodology/adaptability to periodic assessments of ISM status. The review was conducted on December 6-8, 1999, and involved the conduct of two-hour interviews with five separate panels of individuals with various management and operations responsibilities related to PFP. A semi-structured interview process was employed by a team of five ''reviewers'' who directed open-ended questions to the panels which focused on: (1) evidence of management commitment, accountability, and involvement; and, (2) consideration and demonstration of stakeholder (including worker) information and involvement opportunities. The purpose of a panel-to-panel dialogue approach was to better spotlight: (1) areas of mutual reinforcement and alignment that could serve as good examples of the management commitment and accountability aspects of ISMS implementation, and, (2) areas of potential discrepancy that could provide opportunities for improvement. In summary, the Review Team found major strengths to include: (1) the use of multi-disciplinary project work teams to plan and do work; (2) the availability and broad usage of multiple tools to help with planning and integrating work; (3) senior management presence and accessibility; (4) the institutionalization of worker involvement; (5) encouragement of self-reporting and self-assessment by management; (6) the availability of multiple internal communication mechanisms; and, (7) the existence of overall facility-wide safety management goals as well as individualized project work team goals. Major opportunities for improvement identified include: (1) the enhancement of external communications relative to ISM; (2) the institutionalization of ISM-related performance agreements/incentives; (3) the strengthening of feedback loops; (4) fine-tuning the use of tools; and, (5) the formalization of good practices.

BRIGGS, C.R.

2000-02-09T23:59:59.000Z

78

Towards a Unified Approach to Information Integration - A review paper on data/information fusion  

SciTech Connect

Information or data fusion of data from different sources are ubiquitous in many applications, from epidemiology, medical, biological, political, and intelligence to military applications. Data fusion involves integration of spectral, imaging, text, and many other sensor data. For example, in epidemiology, information is often obtained based on many studies conducted by different researchers at different regions with different protocols. In the medical field, the diagnosis of a disease is often based on imaging (MRI, X-Ray, CT), clinical examination, and lab results. In the biological field, information is obtained based on studies conducted on many different species. In military field, information is obtained based on data from radar sensors, text messages, chemical biological sensor, acoustic sensor, optical warning and many other sources. Many methodologies are used in the data integration process, from classical, Bayesian, to evidence based expert systems. The implementation of the data integration ranges from pure software design to a mixture of software and hardware. In this review we summarize the methodologies and implementations of data fusion process, and illustrate in more detail the methodologies involved in three examples. We propose a unified multi-stage and multi-path mapping approach to the data fusion process, and point out future prospects and challenges.

Whitney, Paul D.; Posse, Christian; Lei, Xingye C.

2005-10-14T23:59:59.000Z

79

324 Building Baseline Radiological Characterization  

SciTech Connect

This report documents the analysis of radiological data collected as part of the characterization study performed in 1998. The study was performed to create a baseline of the radiological conditions in the 324 Building.

R.J. Reeder, J.C. Cooper

2010-06-24T23:59:59.000Z

80

ARM - Baseline Change Request Guidelines  

NLE Websites -- All DOE Office Websites (Extended Search)

DocumentsBaseline Change Request Guidelines DocumentsBaseline Change Request Guidelines Page Contents Introduction Submit a BCR BCR Process Flowchart Baseline Change Request Guidelines Introduction Baseline Change Requests (BCR) are used by the ARM Infrastructure as a process to provide configuration control and for formally requesting and documenting changes within the ARM Infrastructure. Configuration Control: BCRs are required for changes to instruments, data systems, data processes, datastreams, measurement methods, and facilities. They help ensure that all aspects of the ARM Infrastructure are consulted prior to implementing changes. Seemingly minor changes can have significant repercussions throughout the Facility and therefore, NO change to an operational instrument, computer, facility, or other system can or will be

Note: This page contains sample records for the topic "integrated baseline review" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Proceedings of the 24th Seismic Research Review: Nuclear Explosion Monitoring: Innovation and Integration  

Science Conference Proceedings (OSTI)

These proceedings contain papers prepared for the 24th Seismic Research Review: Nuclear Explosion Monitoring: Innovation and Integration, held 17-19 September, 2002 in Ponte Vedra Beach, Florida. These papers represent the combined research related to ground-based nuclear explosion monitoring funded by the National Nuclear Security Administration (NNSA), Defense Threat Reduction Agency (DTRA), and other invited sponsors. The scientific objectives of the research are to improve the United States capability to detect, locate, and identify nuclear explosions. The purpose of the meeting is to provide the sponsoring agencies, as well as potential users, an opportunity to review research accomplished during the preceding year and to discuss areas of investigation for the coming year. For the researchers, it provides a forum for the exchange of scientific information toward achieving program goals, and an opportunity to discuss results and future plans. Paper topics include: seismic regionalization and calibration; detection and location of sources; wave propagation from source to receiver; the nature of seismic sources, including mining practices; hydroacoustic, infrasound, and radionuclide methods; on-site inspection; and data processing.

Warren, N. Jill [Editor

2002-09-17T23:59:59.000Z

82

The after-action review training approach: an integrative framework and empirical investigation  

E-Print Network (OSTI)

The afteraction review (AAR; also known as the afterevent review or debriefing) is a training approach that is based on reviews of trainees performance on recently completed tasks or performance events. Used by the military for decades, the use of AARbased training has increased dramatically in recent years. Empirical research investigating AARs, however, is almost nonexistent, and theoretical work on the effectiveness AARbased training and the underlying processes have been limited. The present study presents a theoretical framework for the AAR by integrating the AAR into the existing training literature. In addition, this study presents an empirical evaluation of the effectiveness of AARbased training, and an investigation of whether objective AARbased training is more effective than subjective AARbased training. Onehundred twenty individuals were trained in 30 4person teams on a cognitively complex performance task. Teams were trained using a nonAAR, subjective AAR, or objective AARbased training approach. Declarative knowledge, team performance, and teamefficacy served as the measures of training effectiveness. It was hypothesized that AARbased training (subjective AAR and objective AAR based training combined) would be more effective than nonAARbased training. Further, it was hypothesized that objective AARbased training would be more effective than subjective AARbased training. The study results indicated that AARbased training was more effective than the nonAARbased training approach in terms of team performance and teamefficacy, but not team declarative knowledge. Objective AARbased training was no more effective than subjective AARbased training. Teams performed equally well on the training outcome measures regardless of whether they used an objective or subjective AAR based training approach. It is anticipated that the theoretical framework and empirical results of this study will serve as a catalyst for the integration of AARbased training into existing training literatures and to inform the design and practice of AARbased training systems to take full advantage of their efficacy as training interventions.

Villado, Anton James

2008-08-01T23:59:59.000Z

83

MHD Technology Transfer, Integration and Review Committee. Fifth semi-annual status report, April 1990--September 1990  

DOE Green Energy (OSTI)

This fifth semi-annual status report of the MHD Technology Transfer, Integration, and Review Committee (TTIRC) summarizes activities of the TTIRC during the period April 1990 through September 1990. It includes summaries and minutes of committee meetings, progress summaries of ongoing Proof-of-Concept (POC) contracts, discussions pertaining to technical integration issues in the POC program, and planned activities for the next six months.

Not Available

1992-01-01T23:59:59.000Z

84

A Review of Barriers to and Opportunities for the Integration of Renewable Energy in the Southeast  

DOE Green Energy (OSTI)

The objectives of this study were to prepare a summary report that examines the opportunities for and obstacles to the integration of renewable energy resources in the Southeast between now and the year 2030. The report, which is based on a review of existing literature regarding renewable resources in the Southeast, includes the following renewable energy resources: wind, solar, hydro, geothermal, biomass, and tidal. The evaluation was conducted by the Oak Ridge National Laboratory for the Energy Foundation and is a subjective review with limited detailed analysis. However, the report offers a best estimate of the magnitude, time frame, and cost of deployment of renewable resources in the Southeast based upon the literature reviewed and reasonable engineering and economic estimates. For the purposes of this report, the Southeast is defined as the states of Alabama, Arkansas, Florida, Georgia, Kentucky, Louisiana, Mississippi, North Carolina, South Carolina, Tennessee, Virginia, and West Virginia. In addition, some aspects of the report (wind and geothermal) also consider the extended Southeast, which includes Maryland, Missouri, Oklahoma, and Texas. A description of the existing base of renewable electricity installations in the region is given for each technology considered. Where available, the possible barriers and other considerations regarding renewable energy resources are listed in terms of availability, investment and maintenance costs, reliability, installation requirements, policies, and energy market. As stated above, the report is a comprehensive review of renewable energy resources in the southeastern region of United States based on a literature study that included information obtained from the Southern Bio-Power wiki, sources from the Energy Foundation, sources available to ORNL, and sources found during the review. The report consists of an executive summary, this introductory chapter describing report objectives, a chapter on analysis methods and the status of renewable resources, chapters devoted to each identified renewable resource, and a brief summary chapter. Chapter 2 on analysis methods and status summarizes the benefits of integrating renewable energy resources in the Southeast. The utilization of the existing fuels, both the fossil fuels and the renewable energy resources, is evaluated. The financial rewards of renewable resources are listed, which includes the amount of fuel imported from outside the Southeast to find the net benefit of local renewable generation, and both the typical and new green job opportunities that arise from renewable generation in the Southeast. With the load growth in the Southeast, the growth of transmission and fossil fuel generation may not meet the growing demands for energy. The load growth is estimated, and the benefits of renewable resources for solving local growing energy demands are evaluated. Chapters 3-7 discuss the key renewable energy resources in the Southeast. Six resources available in this region that are discussed are (1) wind, including both onshore and offshore; (2) solar, including passive, photovoltaic, and concentrating; (3) biomass energy, including switchgrass, biomass co-firing, wood, woody biomass, wood industry by-products (harvesting residues, mill waste, etc.), agricultural byproducts, landfill gas to energy and anaerobic digester gas; (4) hydro; and (5) geothermal. Because of limited development, ocean wave and tidal were not considered to be available in significant quantity before 2030 and are not presented in the final analysis. Estimates on the location of potential megawatt generation from these renewable resources in the Southeast are made. Each chapter will describe the existing base of the renewable electricity installations in the region now and, when available, the base of the existing manufacturing capacity in the region for renewable energy resources hardware and software. The possible barriers and considerations for renewable energy resources are presented.

McConnell, Ben W [ORNL; Hadley, Stanton W [ORNL; Xu, Yan [ORNL

2011-08-01T23:59:59.000Z

85

MHD Technology Transfer, Integration and Review Committee. Seventh semi-annual status report, April 1991--September 1991  

DOE Green Energy (OSTI)

This seventh semi-annual status report of the MHD Technology Transfer, Integration and Review Committee (TTIRC) summarizes activities of the TTIRC during the period April 1991 through September 1991. It includes a summary and minutes of the General Committee meeting, progress summaries of ongoing POC contracts, discussions pertaining to technical integration issues in the POC program, and planned activities for the next six months. The meeting included test plan with Western coal, seed regeneration economics, power management for the integrated topping cycle and status of the Clean Coal Technology Proposal activities. Appendices cover CDIF operations HRSR development, CFFF operations etc.

Not Available

1993-02-01T23:59:59.000Z

86

Review: Sustainability or Collapse: An Integrated History and Future of People on Earth edited by Robert Costanza, Lisa J. Graumlich and W. Steffen  

E-Print Network (OSTI)

Review: Sustainability or Collapse: An Integrated HistoryJ. and Steffen, W. (eds. ) Sustainability or Collapse? Anover various time scales. Sustainability or Collapse? is the

Mannion, Antoinette Maria

2008-01-01T23:59:59.000Z

87

Introduction Literature Review Integrated Electric Power Supply Chains Empirical Examples Conclusions An Integrated Electric Power Supply Chain and Fuel  

E-Print Network (OSTI)

primary energy (Energy Information Administration (2000, 2005)) Deregulation Wholesale market Bilateral Conclusions An Integrated Electric Power Supply Chain and Fuel Market Network Framework: Theoretical Modeling with Empirical Analysis for New England Zugang Liu and Anna Nagurney§ Penn State University Hazleton § John F

Nagurney, Anna

88

Introduction Literature Review Integrated Electric Power Supply Chains Empirical Examples Conclusions An Integrated Electric Power Supply Chain and Fuel  

E-Print Network (OSTI)

of net assets, $220 billion annual sales, 40% of domestic primary energy (Energy Information Conclusions An Integrated Electric Power Supply Chain and Fuel Market Network Framework: Theoretical Modeling with Empirical Analysis for New England Forthcoming in Naval Research Logistics Zugang Liu and Anna Nagurney

Nagurney, Anna

89

Introduction Literature Review Integrated Electric Power Supply Chains Empirical Examples Conclusions An Integrated Electric Power Supply Chain and Fuel  

E-Print Network (OSTI)

of net assets, $220 billion annual sales, 40% of domestic primary energy (Energy Information Conclusions An Integrated Electric Power Supply Chain and Fuel Market Network Framework: Theoretical Modeling with Empirical Analysis for New England Zugang Liu and Anna Nagurney§ Isenberg School of Management University

Nagurney, Anna

90

The United States Government Configuration Baseline ...  

Science Conference Proceedings (OSTI)

... ITL). The United States Government Configuration Baseline (USGCB) - Windows Vista Firewall Content. Warning Notice. ...

2013-08-02T23:59:59.000Z

91

The United States Government Configuration Baseline ...  

Science Conference Proceedings (OSTI)

... Laboratory (ITL). The United States Government Configuration Baseline (USGCB) - Windows 7 Content. Warning Notice. Do ...

2013-08-02T23:59:59.000Z

92

Wind Energy and Power System Operations: A Review of Wind Integration Studies to Date  

DOE Green Energy (OSTI)

This paper provides an overview of the challenges associated with wind integration and summarizes the findings of the wind integration studies conducted over the course of the past five years.

DeCesaro, J.; Porter, K.

2009-12-01T23:59:59.000Z

93

Review of the Sodium Bearing Waste Treatment Project - Integrated Waste Treatment Uinit Contractor Operational Readiness Review, June 2012  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Contractor Contractor Operational Readiness Review June 2012 Office of Safety and Emergency Management Evaluations Office of Enforcement and Oversight Office of Health, Safety and Security U.S. Department of Energy i Table of Contents 1.0 Purpose ................................................................................................................................................... 1 2.0 Background ............................................................................................................................................ 1 3.0 Scope ...................................................................................................................................................... 2 4.0 Results ................................................................................................................................................... 2

94

Review of the Sodium Bearing Waste Treatment Project - Integrated Waste Treatment Uinit Contractor Operational Readiness Review, June 2012  

NLE Websites -- All DOE Office Websites (Extended Search)

Contractor Contractor Operational Readiness Review June 2012 Office of Safety and Emergency Management Evaluations Office of Enforcement and Oversight Office of Health, Safety and Security U.S. Department of Energy i Table of Contents 1.0 Purpose ................................................................................................................................................... 1 2.0 Background ............................................................................................................................................ 1 3.0 Scope ...................................................................................................................................................... 2 4.0 Results ................................................................................................................................................... 2

95

Baseline LAW Glass Formulation Testing  

Science Conference Proceedings (OSTI)

The major objective of the baseline glass formulation work was to develop and select glass formulations that are compliant with contractual and processing requirements for each of the LAW waste streams. Other objectives of the work included preparation and characterization of glasses with respect to the properties of interest, optimization of sulfate loading in the glasses, evaluation of ability to achieve waste loading limits, testing to demonstrate compatibility of glass melts with melter materials of construction, development of glass formulations to support ILAW qualification activities, and identification of glass formulation issues with respect to contract specifications and processing requirements.

Kruger, Albert A. [USDOE Office of River Protection, Richland, WA (United States); Mooers, Cavin [The Catholic University of America, Washington, DC (United States). Vitreous State Lab.; Bazemore, Gina [The Catholic University of America, Washington, DC (United States). Vitreous State Lab; Pegg, Ian L. [The Catholic University of America, Washington, DC (United States). Vitreous State Lab; Hight, Kenneth [The Catholic University of America, Washington, DC (United States). Vitreous State Lab; Lai, Shan Tao [The Catholic University of America, Washington, DC (United States). Vitreous State Lab; Buechele, Andrew [The Catholic University of America, Washington, DC (United States). Vitreous State Lab; Rielley, Elizabeth [The Catholic University of America, Washington, DC (United States). Vitreous State Lab; Gan, Hao [The Catholic University of America, Washington, DC (United States). Vitreous State Lab; Muller, Isabelle S. [The Catholic University of America, Washington, DC (United States). Vitreous State Lab; Cecil, Richard [The Catholic University of America, Washington, DC (United States). Vitreous State Lab

2013-06-13T23:59:59.000Z

96

2012 CERTS R&M Peer Review - Renewable Integration Through Risk...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

intra-day energy markets Incorporating better probabilistic forecasts of renewables R. Rajagopal et al., RLD for Integrating Renewable Power, IJEPES 2012 R. Rajagopal et al.,...

97

Review: Human Dimensions of Ecological Restoration: Integrating Science, Nature, and Culture  

E-Print Network (OSTI)

Jamie L. Conklin, MLIS. , Science andHealth Sciences Librarian, Lovejoy Library, SouthernRestoration: Integrating Science, Nature, and Culture Dave

Conklin, Jamie L

2013-01-01T23:59:59.000Z

98

Baseline Ozone Results from 1923 to 1955  

Science Conference Proceedings (OSTI)

Baseline total atmospheric ozone values have been derived, using the Chappuis band, from historical data for 11 Smithsonian sites, including both Northern and Southern Hemispheres. The main baselines consist of 1194 and 970 days respectively for ...

Ronald J. Angione; Robert G. Roosen

1983-08-01T23:59:59.000Z

99

Spent Nuclear Fuel (SNF) project Integrated Safety Management System phase I and II Verification Review Plan  

Science Conference Proceedings (OSTI)

The U.S. Department of Energy (DOE) commits to accomplishing its mission safely. To ensure this objective is met, DOE issued DOE P 450.4, Safety Management System Policy, and incorporated safety management into the DOE Acquisition Regulations ([DEAR] 48 CFR 970.5204-2 and 90.5204-78). Integrated Safety Management (ISM) requires contractors to integrate safety into management and work practices at all levels so that missions are achieved while protecting the public, the worker, and the environment. The contractor is required to describe the Integrated Safety Management System (ISMS) to be used to implement the safety performance objective.

CARTER, R.P.

1999-11-19T23:59:59.000Z

100

Electricity market reform in the European Union : review of progress towards liberalisation and integration  

E-Print Network (OSTI)

The energy market liberalisation process in Europe is increasingly focused on electricity market integration and related cross border issues. This signals that the liberalisation of national electricity markets is now ...

Jamasb, Tooraj

2005-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "integrated baseline review" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Systems integration and collaboration in architecture, engineering, construction, and facilities management: A review  

Science Conference Proceedings (OSTI)

With the rapid advancement of information and communication technologies, particularly Internet and Web-based technologies during the past 15 years, various systems integration and collaboration technologies have been developed and deployed to different ...

Weiming Shen; Qi Hao; Helium Mak; Joseph Neelamkavil; Helen Xie; John Dickinson; Russ Thomas; Ajit Pardasani; Henry Xue

2010-04-01T23:59:59.000Z

102

The mixed waste management facility. Project baseline revision 1.2  

Science Conference Proceedings (OSTI)

Revision 1.2 to the Project Baseline (PB) for the Mixed Waste Management Facility (MWMF) is in response to DOE directives and verbal guidance to (1) Collocate the Decontamination and Waste Treatment Facility (DWTF) and MWMF into a single complex, integrate certain and overlapping functions as a cost-saving measure; (2) Meet certain fiscal year (FY) new-BA funding objectives ($15.3M in FY95) with lower and roughly balanced funding for out years; (3) Reduce Total Project Cost (TPC) for the MWMF Project; (4) Include costs for all appropriate permitting activities in the project TPC. This baseline revision also incorporates revisions in the technical baseline design for Molten Salt Oxidation (MSO) and Mediated Electrochemical Oxidation (MEO). Changes in the WBS dictionary that are necessary as a result of this rebaseline, as well as minor title changes, at WBS Level 3 or above (DOE control level) are approved as a separate document. For completeness, the WBS dictionary that reflects these changes is contained in Appendix B. The PB, with revisions as described in this document, were also the basis for the FY97 Validation Process, presented to DOE and their reviewers on March 21-22, 1995. Appendix C lists information related to prior revisions to the PB. Several key changes relate to the integration of functions and sharing of facilities between the portion of the DWTF that will house the MWMF and those portions that are used by the Hazardous Waste Management (HWM) Division at LLNL. This collocation has been directed by DOE as a cost-saving measure and has been implemented in a manner that maintains separate operational elements from a safety and permitting viewpoint. Appendix D provides background information on the decision and implications of collocating the two facilities.

Streit, R.D.; Throop, A.L.

1995-04-01T23:59:59.000Z

103

Basis for an integrated security ontology according to a systematic review of existing proposals  

Science Conference Proceedings (OSTI)

The use of ontologies to represent knowledge provides us with organization, communication and reusability. The concepts and relations managed by any scientific community need to be formally defined. Since security in information technologies has evolved ... Keywords: Ontologies, Security, Systematic review

Carlos Blanco; Joaqun Lasheras; Eduardo Fernndez-Medina; Rafael Valencia-Garca; Ambrosio Toval

2011-06-01T23:59:59.000Z

104

Multiproject baselines for evaluation of electric power projects  

Science Conference Proceedings (OSTI)

Calculating greenhouse gas emissions reductions from climate change mitigation projects requires construction of a baseline that sets emissions levels that would have occurred without the project. This paper describes a standardized multiproject methodology for setting baselines, represented by the emissions rate (kg C/kWh), for electric power projects. A standardized methodology would reduce the transaction costs of projects. The most challenging aspect of setting multiproject emissions rates is determining the vintage and types of plants to include in the baseline and the stringency of the emissions rates to be considered, in order to balance the desire to encourage no- or low-carbon projects while maintaining environmental integrity. The criteria for selecting power plants to include in the baseline depend on characteristics of both the project and the electricity grid it serves. Two case studies illustrate the application of these concepts to the electric power grids in eastern India and South Africa. We use hypothetical, but realistic, climate change projects in each country to illustrate the use of the multiproject methodology, and note the further research required to fully understand the implications of the various choices in constructing and using these baselines.

Sathaye, Jayant; Murtishaw, Scott; Price, Lynn; Lefranc, Maurice; Roy, Joyashree; Winkler, Harald; Spalding-Fecher, Randall

2003-03-12T23:59:59.000Z

105

Baseline Graphite Characterization: First Billet  

SciTech Connect

The Next Generation Nuclear Plant Project Graphite Research and Development program is currently establishing the safe operating envelope of graphite core components for a very high temperature reactor design. To meet this goal, the program is generating the extensive amount of quantitative data necessary for predicting the behavior and operating performance of the available nuclear graphite grades. In order determine the in-service behavior of the graphite for the latest proposed designs, two main programs are underway. The first, the Advanced Graphite Creep (AGC) program, is a set of experiments that are designed to evaluate the irradiated properties and behavior of nuclear grade graphite over a large spectrum of temperatures, neutron fluences, and compressive loads. Despite the aggressive experimental matrix that comprises the set of AGC test runs, a limited amount of data can be generated based upon the availability of space within the Advanced Test Reactor and the geometric constraints placed on the AGC specimens that will be inserted. In order to supplement the AGC data set, the Baseline Graphite Characterization program will endeavor to provide supplemental data that will characterize the inherent property variability in nuclear-grade graphite without the testing constraints of the AGC program. This variability in properties is a natural artifact of graphite due to the geologic raw materials that are utilized in its production. This variability will be quantified not only within a single billet of as-produced graphite, but also from billets within a single lot, billets from different lots of the same grade, and across different billets of the numerous grades of nuclear graphite that are presently available. The thorough understanding of this variability will provide added detail to the irradiated property data, and provide a more thorough understanding of the behavior of graphite that will be used in reactor design and licensing. This report covers the development of the Baseline Graphite Characterization program from a testing and data collection standpoint through the completion of characterization on the first billet of nuclear-grade graphite. This data set is the starting point for all future evaluations and comparisons of material properties.

Mark C. Carroll; Joe Lords; David Rohrbaugh

2010-09-01T23:59:59.000Z

106

Report of independent consultants reviewing Integrated Test Stands (ITS) performance and readiness of DARHT for construction start  

SciTech Connect

Independent consultants met at Los Alamos, June 15 and 16, 1993, to review progress on the commissioning of the Integrated Test Stand (ITS) for DARHT and to provide DOE with technical input on readiness for construction of the first radiographic arm of DARHT. The consultants concluded that all milestones necessary for demonstrating the performance of the DARHT accelerator have been met and that the project is ready for construction to resume. The experimental program using ITS should be continued to quantify the comparison of experiment and theory, to test improvements on the injector insulator, and to better evaluate the interaction of the beam and the target.

Not Available

1993-08-01T23:59:59.000Z

107

Programmatic Baseline Summary for Phase 1 Privatization for the Tank Farm contractor  

Science Conference Proceedings (OSTI)

The document describes the systematic integrated baseline planning process and provides a summary of the Tank Farm Contractor scope, schedule and cost analysis developed in support of the Phase 1 privatization mission.

DIEDIKER, J.A.

2000-04-22T23:59:59.000Z

108

Expedited Technology Demonstration Project Baseline Revision 3.0  

SciTech Connect

The Expedited Technology Demonstration Project Plan, MWNT Revised Baseline 3.0, replaces and significantly modifies the current baseline. The revised plan will focus efforts specifically on the demonstration of an integrated Molten Salt Oxidation (MSO) system. In addition to the MSO primary unit, offgas, and salt recycle subsystems, the demonstrations will include the generation of robust final forms from process mineral residues. A simplified process flow chart for the expedited demonstration is shown. To minimize costs and to accelerate the schedule for deployment, the integrated system will be staged in an existing facility at LLNL equipped to handle hazardous and radioactive materials. The MSO systems will be activated in FY97, followed by the activation of final forms in FY98.

Adamson, M.G.; Densley, P.J.

1996-10-01T23:59:59.000Z

109

Review of FRT Requirements for Integration of Wind Energy in China and Europe  

Science Conference Proceedings (OSTI)

A comparison is conducted on FRT ability of latest Grid Code requirements for wind farm integration between China and selected EU countries. The main causes of the differences are investigated. The author tried to predict the future trend of regulations ... Keywords: Grid Code, wind farm, fault ride-through

Zhang Yong; Guo Peiyuan

2010-06-01T23:59:59.000Z

110

Hanford site technical baseline data dictionary  

Science Conference Proceedings (OSTI)

The purpose of this Data Dictionary is to provide information concerning the structure and information contained in the Hanford Site Technical Baseline Database (HSTD).

Baynes, P.A. [Lockheed Martin Hanford Corp., Richland, WA (United States)

1997-04-30T23:59:59.000Z

111

Program cost and schedule baseline. Revision 5, (A00000000-00811-1701-00001)  

SciTech Connect

The purpose of this document is to establish quantitative expressions of proposed costs and schedule to serve as a basis for measurement of Program performance. It identifies the components of the Program Cost and Schedule Baseline (PCSB) that will be subject to chance control by the Executive (Level 0) and Program (Level 1) Baseline Change Control Boards (BCCBs) and establishes their baseline values. The Program technical baseline is contained in the Civilian Radioactive Waste Management System (CRWMS) Requirements Document (CRD) and the System Requirement Documents (SRDs) for the individual system elements. Changes to the PCSB will be approved by the Program Baseline Change Control Board (PBCCB). In addition to the PBCCB, the Energy System Acquisition Advisory Board Baseline Change Control Board (ESAAB BCCB) will perform control functions relating to Total Project Cost (TPC) and major schedule milestones for the Yucca Mountain Site Characterization Project, the Waste Acceptance, Storage and Transportation (WAST) Project (formerly Monitored Retrievable Storage (MRS) Project), and Program Integration element.

1995-09-01T23:59:59.000Z

112

Defining Information System For the Baseline Inventory | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Defining Information System For the Baseline Inventory Defining Information System For the Baseline Inventory Defining Information System For the Baseline Inventory Defining...

113

Data integrity review of Three Mile Island Unit 2. Hydrogen burn data. Volume 3  

DOE Green Energy (OSTI)

About 10 hours after the March 28, 1979 loss-of-coolant accident began at Three Mile Island Unit 2 (TMI-2), a hydrogen burn occurred inside the Reactor Building. This report reviews and presents data from 16 channels of resistance temperature detectors (RTDs), 2 steam generator pressure transmitters, 16 Reactor Building pressure switches, 2 channels of Reactor Building pressure measurements, and measurements of Reactor Building hydrogen, oxygen, and nitrogen concentrations with regard to their usefulness for determining the extent of the burn and the resulting pressure and temperature excursions inside the building.

Jacoby, J.K.; Nelson, R.A.; Nalezny, C.L.; Averill, R.H.

1983-09-01T23:59:59.000Z

114

Methods to Develop Energy Baselines for California's  

E-Print Network (OSTI)

Methods to Develop Energy Baselines for California's Regions Transportation Energy Research PIER Transportation Research www.energy.ca.gov/research/transportation May 2011 The Issue New methods and baseline impacts of land use policies and infrastructure investments, and guide future land use decisions

115

Baseline Gas Turbine Development Program fifth quarterly progress report  

DOE Green Energy (OSTI)

Progress is reported for a program to demonstrate by 1976 an experimental gas turbine powered automobile which meets the 1976 Federal Emissions Standards, has significantly improved fuel economy, and is competitive in performance, reliability, and potential manufacturing cost with the conventional piston engine powered, standard size American automobile. Baseline engines 5, 6, and 7 were built. Action to correct a 7 percent power deficiency is underway. Two baseline vehicles are operational, with the third ready for engine installation. Measurement of baseline performance and emissions is in process. NASA Lewis has their baseline engine installation operational. They are also assemblying a cold flow power turbine test rig and have made substantial progress in defining upgraded engine aerodynamics. A study was made of sizing the upgraded engine for a compact size vehicle. Chrysler's proprietary linerless insulation was installed into the endurance engine. Evaluation was delayed by a power turbine section failure. Substantial progress was made in Chrysler's proprietary low emissions burner program. Preparations are being made to evaluate the Solar burner. Evaluation of ceramic regenerator cores are in process. A seal development program was initiated. AiResearch has most of the integrated control system preprototype elements defined, and has many key elements under test. Their transient engine simulation model is nearly operational. A compressor turbine wheel disc is being designed utilizing Pratt-Whitney superplastic forging properties. Procurement of two variable inlet guide vane assemblies is about complete. Detail drawings of a Free Rotor vehicle installation are being completed.

Wagner, C.E.

1974-01-31T23:59:59.000Z

116

The US Long Baseline Neutrino Experiment Study  

Science Conference Proceedings (OSTI)

The US Long Baseline Neutrino Experiment Study was commissioned jointly by Brookhaven National Laboratory (BNL)and Fermi National Accelerator Laboratory (FNAL) to investigate the potential for future U.S. based long baseline neutrino oscillation experiments using MW class conventional neutrino beams that can be produced at FNAL. The experimental baselines are based on two possible detector locations: 1) off?axis to the existing FNAL NuMI beamline at baselines of 700 to 810 km and 2) NSF's proposed future Deep Underground Science and Engineering Laboratory (DUSEL) at baselines greater than 1000 km. Two detector technologies are considered: a megaton class Water Cherenkov detector deployed deep underground at a DUSEL site

Mary Bishai; US Long Baseline Study Group

2008-01-01T23:59:59.000Z

117

2012 SG Peer Review - Demonstration of a Coordinated and Integrated System - Bill Becker, Spirae  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Fort Collins RDSI Project Fort Collins RDSI Project Bill Becker, Oliver Pacific Spirae Inc. June 8, 2012 December 2008 Fort Collins RDSI Objective Life-cycle Funding FY09 - FY12 DOE: $6,323,380 Community: $4,729,569 Total: $11,052,949 Technical Scope I. Demonstrate the ability to reduce electric system distribution feeder peak load by 20% or more through the coordinated use of Distributed Energy Resources (DER). II. Advance the expertise, technologies and infrastructure necessary to achieve the vision of the Fort Collins Zero Energy District (FortZED) Integrate multiple and varied distributed energy resources (DER) from five partner sites with an active management platform that could coordinate the participation of these assets to achieve both project and community goals. 2 December 2008 Needs and Project Targets

118

100-D Area technical baseline report  

Science Conference Proceedings (OSTI)

This document is prepared in support of the 100 Area Environmental Restoration activity at the US Department of Energy`s Hanford Site near Richland, Washington. It provides a technical baseline of waste sites located at the 100-D Area. The report is based on an environmental investigation undertaken by the Westinghouse Hanford Company (WHC) History Office in support of the Environmental Restoration Engineering Function and on review and evaluation of numerous Hanford Site current and historical reports, drawings, and photographs, supplemented by site inspections and employee interviews. No intrusive field investigation or sampling was conducted. All Hanford coordinate locations are approximate locations taken from several different maps and drawings of the 100-D Area. Every effort was made to derive coordinate locations for the center of each facility or waste site, except where noted, using standard measuring devices. Units of measure are shown as they appear in reference documents. The 100-D Area is made up of three operable units: 100-DR-1, 100-DR-2, and 100-DR-3. All three are addressed in this report. These operable units include liquid and solid waste disposal sites in the vicinity of, and related to, the 100-D and 100-DR Reactors. A fourth operable unit, 100-HR-3, is concerned with groundwater and is not addressed here. This report describes waste sites which include cribs, trenches, pits, french drains, retention basins, solid waste burial grounds, septic tanks, and drain fields. Each waste site is described separately and photographs are provided where available. A complete list of photographs can be found in Appendix A. A comprehensive environmental summary is not provided here but may be found in Hanford Site National Environmental Policy Act Characterization (Cushing 1988), which describes the geology and soils, meteorology, hydrology, land use, population, and air quality of the area.

Carpenter, R.W.

1993-08-20T23:59:59.000Z

119

Integrated resource planning for local gas distribution companies: A critical review of regulatory policy issues  

SciTech Connect

According to the report, public utility commissions (PUCs) are increasingly adopting, or considering the adoption of integrated resource planning (IRP) for local gas distribution companies (LDCs). The Energy Policy Act of 1992 (EPAct) requires PUCs to consider IRP for gas LDCs. This study has two major objectives: (1) to help PUCs develop appropriate regulatory approaches with regard to IRP for gas LDCs; and (2) to help PUCs respond to the EPAct directive. The study finds that it is appropriate for PUCs to pursue energy efficiency within the traditional regulatory framework of minimizing private costs of energy production and delivery; and PUCs should play a limited role in addressing environmental externalities. The study also finds that in promoting energy efficiency, PUCs should pursue policies that are incentive-based, procompetitive, and sensitive to rate impacts. The study evaluates a number of traditional and nontraditional ratemaking mechanisms on the basis of cost minimization, energy efficiency, competitiveness, and other criteria. The mechanisms evaluated include direct recovery of DSM expenses, lost revenue adjustments for DSM options, revenue decoupling mechanisms, sharing of DSM cost savings, performance-based rate of return for DSM, provision of DSM as a separate service, deregulation of DSM service, price caps, and deregulation of the noncore gas market. The study concludes with general recommendations for regulatory approaches and ratemaking mechanisms that PUCs may wish to consider in advancing IRP objectives.

Harunuzzaman, M.; Islam, M.

1994-08-01T23:59:59.000Z

120

Baseline Wind Energy Facility | Open Energy Information  

Open Energy Info (EERE)

Baseline Wind Energy Facility Baseline Wind Energy Facility Jump to: navigation, search Name Baseline Wind Energy Facility Facility Baseline Wind Energy Facility Sector Wind energy Facility Type Commercial Scale Wind Facility Status Proposed Owner First Wind Developer First Wind Location Gilliam County OR Coordinates 45.626863°, -120.162885° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":45.626863,"lon":-120.162885,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

Note: This page contains sample records for the topic "integrated baseline review" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Tanzania Roads Evaluation - Baseline | Data.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Tanzania Roads Evaluation - Baseline Tanzania Roads Evaluation - Baseline Agriculture Community Menu DATA APPS EVENTS DEVELOPER STATISTICS COLLABORATE ABOUT Agriculture You are here Data.gov » Communities » Agriculture » Data Tanzania Roads Evaluation - Baseline Dataset Summary Description Baseline survey for impact evaluation of MCC's roads improvement investments in Tanzania. The evaluation will examine the project's household- and community-level effects on local standards of living along the roads. For the evaluation of major roads on the mainland, Economic Development Initiatives conducted a survey of 3,000 households in 200 communities in 2009. For the Pemba rural roads evaluation, Economic Development Initiatives conducted a survey on 570 households in the treatment group and 630 households in the comparison group.

122

LITERATURE REVIEW FOR THE BASELINE KNOWLEDGE ASSESSMENT OF THE...  

NLE Websites -- All DOE Office Websites (Extended Search)

of Energy, Hydrogen, Fuel Cells, and Infrastructure Technologies Program, "Safety, Codes & Standards," http:www.eere.energy.govhydrogenandfuelcellscodes . 2 Fuel Cell Today,...

123

Review  

E-Print Network (OSTI)

review of the Phase I DP for the West Valley Demonstration Project, Rev. I (Reference 1). DOE submitted responses to the other 38 of the 44 RAIs to NRC on August 13, 2009 (Reference 3). Enclosed are 20 paper copies of the RAI response package along with 20 compact disks. Each compact disk contains an electronic copy of the six RAI responses and two calculationQ t Dr. Keith 1. McConnell-3- September 16, 2009 For Further Information Please note that DOE's RAI responses and the proposed decommissioning approach are based on the preferred alternative in the Revised Draft Environmental Impact Statement for

unknown authors

2009-01-01T23:59:59.000Z

124

Automated baseline change detection -- Phases 1 and 2. Final report  

SciTech Connect

The primary objective of this project is to apply robotic and optical sensor technology to the operational inspection of mixed toxic and radioactive waste stored in barrels, using Automated Baseline Change Detection (ABCD), based on image subtraction. Absolute change detection is based on detecting any visible physical changes, regardless of cause, between a current inspection image of a barrel and an archived baseline image of the same barrel. Thus, in addition to rust, the ABCD system can also detect corrosion, leaks, dents, and bulges. The ABCD approach and method rely on precise camera positioning and repositioning relative to the barrel and on feature recognition in images. The ABCD image processing software was installed on a robotic vehicle developed under a related DOE/FETC contract DE-AC21-92MC29112 Intelligent Mobile Sensor System (IMSS) and integrated with the electronics and software. This vehicle was designed especially to navigate in DOE Waste Storage Facilities. Initial system testing was performed at Fernald in June 1996. After some further development and more extensive integration the prototype integrated system was installed and tested at the Radioactive Waste Management Facility (RWMC) at INEEL beginning in April 1997 through the present (November 1997). The integrated system, composed of ABCD imaging software and IMSS mobility base, is called MISS EVE (Mobile Intelligent Sensor System--Environmental Validation Expert). Evaluation of the integrated system in RWMC Building 628, containing approximately 10,000 drums, demonstrated an easy to use system with the ability to properly navigate through the facility, image all the defined drums, and process the results into a report delivered to the operator on a GUI interface and on hard copy. Further work is needed to make the brassboard system more operationally robust.

Byler, E.

1997-10-31T23:59:59.000Z

125

Review of the Independent Integrated Safety Management/Integrated Work Management Assessment of Research and Develoopment and Programmatic Work at the Los Alamos National Laboratory, December 2011  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Independent Integrated Safety Independent Integrated Safety Management/Integrated Work Management Assessment of Research and Development and Programmatic Work at the Los Alamos National Laboratory December 2011 Office of Safety and Emergency Management Evaluations Office of Enforcement and Oversight Office of Health, Safety and Security U.S. Department of Energy Table of Contents 1.0 Purpose ................................................................................................................................................... 1 2.0 Background ............................................................................................................................................ 1 3.0 Scope ...................................................................................................................................................... 1

126

Salton Sea sampling program: baseline studies  

DOE Green Energy (OSTI)

Baseline data are provided on three species of fish from the Salton Sea, California. The fishes considered were the orange mouth corvina (Cynoscion xanthulus), gulf croaker (Bairdiella icistius) and sargo (Anisotremus davidsonii). Morphometric and meristic data are presented as a baseline to aid in the evaluation of any physiological stress the fish may experience as a result of geothermal development. Analyses were made on muscle, liver, and bone of the fishes sampled to provide baseline data on elemental tissue burdens. The elements measured were: As, Br, Ca, Cu, Fe, Ga, K, Mn, Mi, Pb, Rb, Se, Sr, Zn, and Zr. These data are important if an environmentally sound progression of geothermal power production is to occur at the Salton Sea.

Tullis, R.E.; Carter, J.L.; Langlois, G.W.

1981-04-13T23:59:59.000Z

127

TERMS OF REFERENCE Baseline Study of Bari Imam Colony  

E-Print Network (OSTI)

This is the thirteenth year that Plan is operating in Pakistan. It has three program units based in the districts of Chakwal and Vehari in the Province of Punjab and the squatter settlements of Islamabad (the capital city). Plan Pakistan strives to reach out to as many children as possible through program such as Enabling Environment for Good Governance, The Right to Quality Education, Right to an Adequate Standard of Living, Right to health and health services and Mainstreaming Child-Centred Disaster Risk Management. Plan works in partnership first and foremost with children and their families, communities and their organizations, government departments and like-minded development agencies. About the Assignment Plan has intended to minimize the vulnerabilities of children living in Bari Imam Colony, Islamabad. This slum consists of approximately 3,000 households. Based on initial assessment Plan aims to engage local residents to take charge of activities, to generate internal and external resources, to sustain their development and to bring about changes in the quality of life of their children. Plans program interventions may bring intended and unintended results in lives of children. To asses the gravity of change a baseline study need to be in place before launching program in Bari Imam Colony. Overall purpose of the assignment Plan Pakistan wants consultant to Review the project document, objectives and indicators and conduct the baseline study of the community in the light of the project document with 95 % confidence interval. Methodology and procedures: The consultant/consulting organization will propose the detailed methodology to implement the said assignment; few key tasks are as under. 1. Review the Project documents and conduct meetings with the relevant Plan staff at Country Office and urban programme unit. 2. Prepare tools for the baseline (sampling methodology, questionnaire, data entry and analysis tool(s), etc.) 3. Pretesting and adjustment of the tools 4. Data collection, cleaning and analysis

unknown authors

2010-01-01T23:59:59.000Z

128

Better Buildings Neighborhood Program: Step 4: Establish Baseline...  

NLE Websites -- All DOE Office Websites (Extended Search)

Establish Baseline Quality Workforce Standards to someone by E-mail Share Better Buildings Neighborhood Program: Step 4: Establish Baseline Quality Workforce Standards on Facebook...

129

South Africa - Greenhouse Gas Emission Baselines and Reduction...  

Open Energy Info (EERE)

Africa - Greenhouse Gas Emission Baselines and Reduction Potentials from Buildings Jump to: navigation, search Name South Africa - Greenhouse Gas Emission Baselines and Reduction...

130

Mexico - Greenhouse Gas Emissions Baselines and Reduction Potentials...  

Open Energy Info (EERE)

Greenhouse Gas Emissions Baselines and Reduction Potentials from Buildings Jump to: navigation, search Name Mexico - Greenhouse Gas Emissions Baselines and Reduction Potentials...

131

Atlantic NAD 83 SLA Baseline Points | Data.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

SLA Baseline Points Ocean Data Tools Technical Guide Map Gallery Regional Planning Feedback Ocean You are here Data.gov Communities Ocean Data Atlantic NAD 83 SLA Baseline...

132

Cost and Performance Baseline for Fossil Energy Plants  

NLE Websites -- All DOE Office Websites (Extended Search)

Baseline for Fossil Energy Plants Volume I (May 2007) Cost and Performance Baseline for Fossil Energy Plants, Volume I Report Desk Reference Presentation Slides "Gasification Costs...

133

PARS II Process Document - Over Target Baseline (OTB) Reporting...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Over Target Baseline (OTB) Reporting PARS II Process Document - Over Target Baseline (OTB) Reporting This document details the process by which contractors should conduct Over...

134

PARS II Process Document - Over Target Baseline (OTB) Reporting...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

PARS II Process Document - Over Target Baseline (OTB) Reporting PARS II Process Document - Over Target Baseline (OTB) Reporting This document details the process by which...

135

Seismic baseline and induction studies- Roosevelt Hot Springs...  

Open Energy Info (EERE)

Seismic baseline and induction studies- Roosevelt Hot Springs, Utah and Raft River, Idaho Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Report: Seismic baseline and...

136

Solid Waste Program technical baseline description  

SciTech Connect

The system engineering approach has been taken to describe the technical baseline under which the Solid Waste Program is currently operating. The document contains a mission analysis, function analysis, system definition, documentation requirements, facility and project bases, and uncertainties facing the program.

Carlson, A.B.

1994-07-01T23:59:59.000Z

137

Waste management project technical baseline description  

SciTech Connect

A systems engineering approach has been taken to describe the technical baseline under which the Waste Management Project is currently operating. The document contains a mission analysis, function analysis, requirement analysis, interface definitions, alternative analysis, system definition, documentation requirements, implementation definitions, and discussion of uncertainties facing the Project.

Sederburg, J.P.

1997-08-13T23:59:59.000Z

138

Using Near Detector Data to Make Far Detector Predictions in an On?Axis Long?Baseline Experiment  

Science Conference Proceedings (OSTI)

Various techniques have been developed in long?baseline neutrino oscillation experiments to leverage near detector data to form predictions for the far detector spectrum and backgrounds. I will review the techniques used in MINOS

L. Whitehead; The MINOS Collaboration

2011-01-01T23:59:59.000Z

139

National Nuclear Security Administration Service Center Environmental Programs Long-Term Environmental Stewardship Baseline Handbook  

SciTech Connect

As environmental restoration (ER) projects move toward completion, the planning, integration, and documentation of long-term environmental stewardship (LTES) activities is increasingly important for ensuring smooth transition to LTES. The Long-Term Environmental Stewardship Baseline Handbook (Handbook) prepared by the National Nuclear Security Administration (NNSA) Service Center Environmental Programs Department (EPD) outlines approaches for integrating site-specific LTES planning and implementation into site ER baseline documentation. Since LTES will vary greatly from site to site, the Handbook also provides for flexibility in addressing LTES in ER Project life-cycle baselines, while clearly identifying Environmental Management (EM) requirements. It provides suggestions for enacting LTES principles and objectives through operational activities described in site-specific LTES plans and life cycle ER Project baseline scope, cost, and schedule documentation and tools for more thorough planning, better quantification, broader understanding of risk and risk management factors, and more comprehensive documentation. LTES planning applied to baselines in a phased approach will facilitate seamlessly integrating LTES into site operational activities, thereby minimizing the use of resources.

Griswold, D. D.; Rohde, K.

2003-02-26T23:59:59.000Z

140

Pomona Loop Baseline Performance Testing.PDF  

NLE Websites -- All DOE Office Websites (Extended Search)

Pomona Loop Baseline Performance Testing Summary Pomona Loop Baseline Performance Testing Summary The U.S. Department of Energy's Field Operations Program sponsors the Urban and Freeway Pomona Loop range testing in Southern California. The testing is performed by one of the Program's testing partners, Southern California Edison. The vehicles are tested on local city streets (Urban Loop) and four highways (Freeway Loop). The Urban Loop is 19.3 miles long, ranging in elevation from 900 to 1500 feet, with approximately 50 stop signs and traffic lights. The Freeway Loop is 37.2 miles long, ranging in elevation from 700 to 1150 feet, and consists of four connected freeways shaped like a rectangle. When a vehicle is Pomona Loop tested, eight range tests are performed, with four tests on the Urban Loop and four on the Freeway Loop. The range tests are performed

Note: This page contains sample records for the topic "integrated baseline review" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Systematic errors in long baseline oscillation experiments  

Science Conference Proceedings (OSTI)

This article gives a brief overview of long baseline neutrino experiments and their goals, and then describes the different kinds of systematic errors that are encountered in these experiments. Particular attention is paid to the uncertainties that come about because of imperfect knowledge of neutrino cross sections and more generally how neutrinos interact in nuclei. Near detectors are planned for most of these experiments, and the extent to which certain uncertainties can be reduced by the presence of near detectors is also discussed.

Harris, Deborah A.; /Fermilab

2006-02-01T23:59:59.000Z

142

Estimating the cold war mortgage: The 1995 baseline environmental management report. Volume II: Site summaries  

SciTech Connect

This volume, Volume II presents the site data that was used to generate the Department of Energy`s (DOE) initial Baseline Environmental Management Report (BEMR). The raw data was obtained by DOE field personnel from existing information sources and anticipated environmental management strategies for their sites and was tempered by general assumptions and guidance developed by DOE Headquarters personnel. This data was then integrated by DOE Headquarters personnel and modified to ensure that overall constraints such as funding and waste management capacity were addressed. The site summaries are presented by State and broken out by discrete activities and projects. The Volume I Glossary has been repeated to facilitate the reader`s review of Volume II. The information presented in the site summaries represents the best data and assumptions available as of February 1, 1995. Assumptions that have not been mandated by formal agreement with appropriate regulators and other stakeholders do not constitute decisions by the Department nor do they supersede existing agreements. In addition, actions requiring decisions from external sources regarding unknowns such as future land use and funding/scheduling alternatives, as well as internal actions such as the Department`s Strategic Realignment initiative, will alter the basis and general assumptions used to generate the results for this report. Consequently, the numbers presented in the site summaries do not represent outyear budget requests by the field installations.

NONE

1995-03-01T23:59:59.000Z

143

NREL: Climate Neutral Research Campuses - Determine Baseline...  

NLE Websites -- All DOE Office Websites (Extended Search)

Protection Agency's Emissions and Generation Resource Integrated Database (eGRID). Scope 3: Transportation impacts from commuters and business travel, which can be...

144

Baselines for Greenhouse Gas Reductions: Problems, Precedents, Solutions |  

Open Energy Info (EERE)

Baselines for Greenhouse Gas Reductions: Problems, Precedents, Solutions Baselines for Greenhouse Gas Reductions: Problems, Precedents, Solutions Jump to: navigation, search Tool Summary Name: Baselines for Greenhouse Gas Reductions: Problems, Precedents, Solutions Agency/Company /Organization: World Bank Sector: Energy Topics: Baseline projection, GHG inventory, Pathways analysis Resource Type: Publications, Lessons learned/best practices Website: www.p2pays.org/ref/22/21739.pdf References: Baselines for Greenhouse Gas Reductions: Problems, Precedents, Solutions[1] Summary "Rigor in baselines It's important to establish the right degree of rigor in baselining. Overly lax baselines will threaten the system's credibility and usefulness, and shift rents from high quality providers to low quality providers of offsets. Overly stringent baselines will discourage valid projects and

145

2012 CERTS LAAR Program Peer Review - Integration and Extension of Direct Load Management of Smart Loads - Anna Scaglioni, UC Davis  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Integration and Extension of Direct Integration and Extension of Direct Load Management of Smart Loads Anna Scaglione, UC Davis GRA: Mahnoosh Alizadeh Project objective  Invent methods to "store" load demand for * Real-time "generation following" * Integration of load reserves as dispatchable assets in the Energy Market  Architecture for virtual "reserves" (queues) of electrical load demand * Watts to Job mapping (analysis)  Captures digitally the service requirements - Equal service type = Equal queue * Job to Watts mapping (synthesis)  Allows to optimally schedule the load profile Major technical accomplishments  Centralized model: Digital Direct Load Scheduling (DDLS) - Year 1-Year 2

146

Baseline Graphite Initial Mechanical Test Report  

SciTech Connect

The Next Generation Nuclear Plant (NGNP) Project is tasked with selecting a high temperature gas reactor technology that will be capable of generating electricity and supplying large amounts of process heat. The NGNP is presently being designed as a helium-cooled high temperature gas reactor (HTGR) with a large graphite core. The graphite baseline characterization project is conducting the research and development (R&D) activities deemed necessary to fully qualify nuclear-grade graphite for use in the NGNP reactor. One of the major fundamental objectives of the project is establishing nonirradiated thermomechanical and thermophysical properties by characterizing lot-to-lot and billet-to-billet variations (for probabilistic baseline data needs) through extensive data collection and statistical analysis. The reactor core will be made up of stacks of graphite moderator blocks. In order to gain a more comprehensive understanding of the varying characteristics in a wide range of suitable graphites, any of which can be classified as nuclear grade, an experimental program has been initiated to develop an extensive database of the baseline characteristics of numerous candidate graphites. Various factors known to affect the properties of graphite will be investigated, including specimen size, spatial location within a graphite billet, specimen orientation within a billet (either parallel to [P] or transverse to [T] the long axis of the as-produced billet), and billet-to-billet variations within a lot or across different production lots. Because each data point is based on a certain position within a given billet of graphite, particular attention must be paid to the traceability of each specimen and its spatial location and orientation within each billet. The evaluation of these properties is discussed in the Graphite Technology Development Plan (Windes et. al 2007). One of the key components in the evaluation of these graphite types will be mechanical testing of specimens drawn from carefully controlled sections of each billet. This report is confirmation that the test procedures are in place and approved, and that mechanical testing of graphite under the Baseline Graphite Characterization program has commenced.

Mark Carroll; Randy Lloyd

2009-09-01T23:59:59.000Z

147

Mexico - Greenhouse Gas Emissions Baselines and Reduction Potentials from  

Open Energy Info (EERE)

Greenhouse Gas Emissions Baselines and Reduction Potentials from Greenhouse Gas Emissions Baselines and Reduction Potentials from Buildings Jump to: navigation, search Name Mexico - Greenhouse Gas Emissions Baselines and Reduction Potentials from Buildings Agency/Company /Organization United Nations Environment Programme Sector Energy Focus Area Buildings Topics Baseline projection, GHG inventory, Pathways analysis, Background analysis Resource Type Publications Website http://www.unep.org/sbci/pdfs/ Country Mexico Central America References Greenhouse Emissions Baselines and Reduction Potentials for Buildings[1] Mexico - Greenhouse Gas Emissions Baselines and Reduction Potentials from Buildings Screenshot "This report represents the first comprehensive description of the factors that determine the present and future impacts of residential and commercial

148

Document Number Q0029500 Baseline Risk Assessment Update 4.0 Baseline Risk Assessment Update  

Office of Legacy Management (LM)

Baseline Risk Assessment Update Baseline Risk Assessment Update 4.0 Baseline Risk Assessment Update This section updates the human health and the ecological risk assessments that were originally presented in the 1998 RI (DOE 1998a). The impacts on the 1998 risk assessments are summarized in Section 2.9. 4.1 Human Health Risk Assessment Several activities completed since 1998 have contributed to changes in surface water and ground water concentrations. Activities that have impacted, or likely impacted surface water and ground water concentrations are Millsite Excavation (Section 2.1) Remediation of Soil and Sediment Along Montezuma Creek (Section 2.3) Millsite Dewatering and Treatment (Section 2.5) PRB Treatability Study (Section 2.6) Surface water and ground water monitoring data have been used to refine the list of COCs

149

NETL - Bituminous Baseline Performance and Cost Interactive Tool | Open  

Open Energy Info (EERE)

NETL - Bituminous Baseline Performance and Cost Interactive Tool NETL - Bituminous Baseline Performance and Cost Interactive Tool Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Bituminous Baseline Performance and Cost Interactive Tool Agency/Company /Organization: National Energy Technology Laboratory Sector: Energy Topics: Baseline projection, GHG inventory Resource Type: Software/modeling tools Website: www.netl.doe.gov/energy-analyses/refshelf/results.asp?ptype=Models/Too References: Bituminous Baseline Performance and Cost Interactive Tool [1] Bituminous Baseline Performance and Cost Interactive Tool The Bituminous Baseline Performance and Cost Interactive Tool illustrates key data from the Cost and Performance Baseline for Fossil Energy Plants - Bituminous Coal and Natural Gas to Electricity report. The tool provides an

150

Grocery 2009 TSD Chicago Baseline | Open Energy Information  

Open Energy Info (EERE)

Type Baseline Model Target Type ASHRAE 90.1 2004 Model Year 2009 IDF file http:apps1.eere.energy.govbuildingsenergyplusmodelsChicago2009TSDGroceryBaseline.idf XML file...

151

Grocery 2009 TSD Miami Baseline | Open Energy Information  

Open Energy Info (EERE)

Type Baseline Model Target Type ASHRAE 90.1 2004 Model Year 2009 IDF file http:apps1.eere.energy.govbuildingsenergyplusmodelsMiami2009TSDGroceryBaseline.idf XML file...

152

Proposed Methodology for LEED Baseline Refrigeration Modeling (Presentation)  

SciTech Connect

This PowerPoint presentation summarizes a proposed methodology for LEED baseline refrigeration modeling. The presentation discusses why refrigeration modeling is important, the inputs of energy models, resources, reference building model cases, baseline model highlights, example savings calculations and results.

Deru, M.

2011-02-01T23:59:59.000Z

153

US Biofuels Baseline and impact of extending the  

E-Print Network (OSTI)

June 2011 US Biofuels Baseline and impact of extending the $0.45 ethanol blenders baseline projections for agricultural and biofuel markets.1 That baseline assumed current biofuel policy for cellulosic biofuels was assumed to expire at the end of 2012. This report compares a slightly modified

Noble, James S.

154

Baseline Gas Turbine Development Program twelfth quarterly progress report  

DOE Green Energy (OSTI)

Progress is reported for a program to demonstrate by 1976 an experimental gas turbine powered automobile which meets the 1978 Federal Emissions Standards, has significantly improved fuel economy, and is competitive in performance, reliability, and potential manufacturing cost with the conventional piston engine powered, standard size American automobile. The endurance engine was modified to incorporate a power turbine drive to the regenerators in order to simulate free rotor (upgraded) conditions. A portable baseline engine fixture complete with controls, intake, exhaust, and transmission is being assembled for odor evaluation. An additional 502 engine hours were accumulated on ceramic regenerators and seals. No core or seal failures were experienced during engine test. Initial fixture tests of zirconia seals show torque levels comparable with nickle oxide seals against the same matrix. An ambient compensation schedule was devised for the upgraded engine integrated control, and the integrated control system specifications were updated. A proposed hydromechanical automotive continuously variable ratio transmission (CVT) was evaluated and approved for preliminary development. Tests of heat rejection to the oil for lined versus linerless insulated engine assemblies indicated no heat loss penalty in omitting the metal liners. A study was made of various power turbine rotor assemblies and a final design was selected. Optimization studies of the two-stage power turbine reduction gears and regenerator spur and worm gears were completed. Initial tests on the fixture for simulating the scaled S-26 upgraded burner have begun.

Schmidt, F W; Wagner, C E

1975-10-31T23:59:59.000Z

155

Baseline Gas Turbine Development Program ninth quarterly progress report  

DOE Green Energy (OSTI)

Progress is reported for a program to demonstrate by 1976 an experimental gas turbine powered automobile which meets the 1978 Federal Emissions Standards, has significantly improved fuel economy, and is competitive in performance, reliability, and potential manufacturing cost with the conventional piston engine powered, standard size American automobile. NASA completed the first phase of their baseline engine heat balance tests, and an upgraded engine compressor is being scaled for test. EPA completed their report on vehicle tests including emissions and vehicle performance, and a new endurance engine is on test. Significant development progress was made on both fixed and variable geometry combustors. After 45 hours of engine operation with Vendor A ceramic regenerator, no significant deterioration of the matrix, seals, or elastomeric mount was encountered. Ceramic regenerator stress analysis has commenced. Additional developments in non-nickel oxide regenerator rubbing seals are encouraging. The first preprototype integrated control system is in vehicle operation. Control adaptation for variable inlet guide vanes and water injection is progressing. AiRefrac turbine wheels were verified dimensionally and are being processed for engine testing. Water injection tests with a four nozzle system were run, and additional performance documentation of variable inlet guide vanes was obtained. Linerless insulation is on test in the free rotor engine, the new endurance engine, and a performance engine. The free rotor engine completed test cell checkout and was installed in a vehicle. Vehicle checkout, including a preprototype integrated control, is underway. Detailed specifications of the upgraded engine were written.

Schmidt, C.E.

1975-01-31T23:59:59.000Z

156

Outline Introduction Literature Review Electric Power Supply Chains Empirical Examples Conclusions An Integrated Electric Power Supply Chain and Fuel Market  

E-Print Network (OSTI)

billion annual sales, 40% of domestic primary energy (Energy Information Administration (2000, 2005 An Integrated Electric Power Supply Chain and Fuel Market Network Framework: Theoretical Modeling with Empirical Analysis for New England Zugang Liu and Anna Nagurney§ Isenberg School of Management University

Nagurney, Anna

157

Outline Introduction Literature Review Electric Power Supply Chains Empirical Examples Conclusions An Integrated Electric Power Supply Chain and Fuel  

E-Print Network (OSTI)

primary energy (Energy Information Administration (2000, 2005)) Deregulation Wholesale market Bilateral An Integrated Electric Power Supply Chain and Fuel Market Network Framework: Theoretical Modeling with Empirical Analysis for New England Zugang Liu Isenberg School of Management University of Massachusetts at Amherst

Nagurney, Anna

158

Baseline Gas Turbine Development Program eighth quarterly progress report  

DOE Green Energy (OSTI)

Progress is reported for a program to demonstrate by 1976 an experimental gas turbine powered automobile which meets the 1978 Federal Emissions Standards, has significantly improved fuel economy, and is competitive in performance, reliability, and potential manufacturing cost with the conventional piston engine powered, standard size American automobile. Major preparations for engine heat balance tests by NASA were completed. EPA laboratories completed Baseline vehicle emissions, noise, and odor tests. Assembly of the program endurance engine is nearing completion. Test cell evaluation of the government furnished combustor (Solar) verified steady state emissions to be extremely low. Initial engine tests of Vendor A ceramic regenerator cores with an elastomeric drive verified performance predictions. Efforts towards developing a non-nickel oxide regenerator seal show extreme sensitivity to porosity differences between cores of different suppliers. All three preprototype integrated control systems were built. Modifications are being worked out to achieve a stable low speed operation. Two prototype compressor turbine wheels made from the reuseable pattern process are being inspected and processed for testing. The engine housing modified for operation at higher cycle temperatures and pressures was received. The baseline engine converted to free rotor is completing test cell check out. The modified vehicle is ready for engine installation. The upgraded engine characterization was updated to include the latest information on V.I.G.V., rotors, and bearings. The upgraded engine housing is being modeled physically and analytically for design and stress studies. An accessory drive system for the upgraded engine was selected, and a final layout is in process.

Schmidt, C.E.

1974-10-31T23:59:59.000Z

159

Utilities and offsites design baseline. Outside Battery Limits Facility 6000 tpd SRC-I Demonstration Plant. Volume 1  

SciTech Connect

As part of the overall Solvent Refined Coal (SRC-1) project baseline being prepared by International Coal Refining Company (ICRC), the RUST Engineering Company is providing necessary input for the Outside Battery Limits (OSBL) Facilities. The project baseline is comprised of: design baseline - technical definition of work; schedule baseline - detailed and management level 1 schedules; and cost baseline - estimates and cost/manpower plan. The design baseline (technical definition) for the OSBL Facilities has been completed and is presented in Volumes I, II, III, IV, V and VI. The OSBL technical definition is based on, and compatible with, the ICRC defined statement of work, design basis memorandum, master project procedures, process and mechanical design criteria, and baseline guidance documents. The design basis memorandum is included in Paragraph 1.3 of Volume I. The baseline design data is presented in 6 volumes. Volume I contains the introduction section and utility systems data through steam and feedwater. Volume II continues with utility systems data through fuel system, and contains the interconnecting systems and utility system integration information. Volume III contains the offsites data through water and waste treatment. Volume IV continues with offsites data, including site development and buildings, and contains raw materials and product handling and storage information. Volume V contains wastewater treatment and solid wastes landfill systems developed by Catalytic, Inc. to supplement the information contained in Volume III. Volume VI contains proprietary information of Resources Conservation Company related to the evaporator/crystallizer system of the wastewater treatment area.

None

1984-05-25T23:59:59.000Z

160

2012 CERTS R&M Peer Review - Summary: Renewable Integration Through Risk-Limiting Dispatch - Pravin Varaiya  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Integration Through Risk-Limiting Dispatch And Distributed Resource Integration Through Risk-Limiting Dispatch And Distributed Resource Aggregation Project Lead: Pravin Varaiya Co-investigators: Felix Wu, K. Poolla Project objective The research develops two approaches for aggregating intermittent power generation (such as wind and solar) with reserves of different types, including fast-responding generation, electric storage, and demand response. The first approach extends current dispatch rules to create a dynamic portfolio of generation resources that collectively behaves as reliably as dispatchable thermal generation, while minimizing the cost of reserve generation and capacity and maintaining the risk of imbalance below a pre-specified acceptable level. The approach makes the optimum use of probabilistic forecasts and the opportunities offered by multiple decision

Note: This page contains sample records for the topic "integrated baseline review" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

LTC vacuum blasting machine (metal): Baseline report  

SciTech Connect

The LTC coating removal technology was tested and is being evaluated at Florida International University (FIU) as a baseline technology. In conjunction with evaluation of efficiency and cost, this report covers the evaluation conducted for safety and health issues. It is a commercially available technology and has been used for various projects at locations throughout the country. The LTC coating removal system consisted of several hand tools, a Roto Peen scaler, and a needlegun. They are designed to remove coatings from steel, concrete, brick, and wood. These hand tools are used with the LTC PTC-6 vacuum system to capture dust and debris as removal of the coating takes place. The safety and health evaluation during the testing demonstration focused on two main areas of exposure: dust and noise. The dust exposure was minimal but noise exposure was significant. Further testing for each exposure is recommended because of the environment where the testing demonstration took place. It is feasible that the dust and noise levels will be higher in an enclosed operating environment of different construction. In addition, other areas of concern found were arm-hand vibration, whole-body vibration, ergonomics, heat stress, tripping hazards, electrical hazards, machine guarding, and lockout/tagout.

1997-07-31T23:59:59.000Z

162

LTC vacuum blasting machine (concrete): Baseline report  

SciTech Connect

The LTC shot blast technology was tested and is being evaluated at Florida International University (FIU) as a baseline technology. In conjunction with FIU`s evaluation of efficiency and cost, this report covers the evaluation conducted for safety and health issues. It is a commercially available technology and has been used for various projects at locations throughout the country. The LTC 1073 Vacuum Blasting Machine uses a high-capacity, direct-pressure blasting system which incorporates a continuous feed for the blast media. The blast media cleans the surface within the contained brush area of the blast. It incorporates a vacuum system which removes dust and debris from the surface as it is blasted. The safety and health evaluation during the testing demonstration focused on two main areas of exposure: dust and noise. Dust exposure during maintenance activities was minimal, but due to mechanical difficulties dust monitoring could not be conducted during operation. Noise exposure was significant. Further testing for each of these exposures is recommended because of the outdoor environment where the testing demonstration took place. This may cause the results to be inaccurate. It is feasible that the dust and noise levels will be higher in an enclosed environment. In addition, other safety and health issues found were ergonomics, heat stress, tripping hazards, electrical hazards, lockout/tagout, and arm-hand vibration.

1997-07-31T23:59:59.000Z

163

Pentek metal coating removal system: Baseline report  

SciTech Connect

The Pentek coating removal technology was tested and is being evaluated at Florida International University (FIU) as a baseline technology. In conjunction with FIU`s evaluation of efficiency and cost, this report covers evaluation conducted for safety and health issues. It is a commercially available technology and has been used for various projects at locations throughout the country. The Pentek coating removal system consisted of the ROTO-PEEN Scaler, CORNER-CUTTER{reg_sign}, and VAC-PAC{reg_sign}. They are designed to remove coatings from steel, concrete, brick, and wood. The Scaler uses 3M Roto Peen tungsten carbide cutters while the CORNER-CUTTER{reg_sign} uses solid needles for descaling activities. These hand tools are used with the VAC-PAC{reg_sign} vacuum system to capture dust and debris as removal of the coating takes place. The safety and health evaluation during the testing demonstration focused on two main areas of exposure: dust and noise. Dust exposure minimal, but noise exposure was significant. Further testing for each exposure is recommended because of the environment where the testing demonstration took place. It is feasible that the dust and noise levels will be higher in an enclosed operating environment of different construction. In addition, other areas of concern found were arm-hand vibration, whole-body, ergonomics, heat stress, tripping hazards, electrical hazards, machine guarding, and lockout/tagout.

1997-07-31T23:59:59.000Z

164

Land Use Baseline Report Savannah River Site  

Science Conference Proceedings (OSTI)

This document is to serve as a resource for Savannah River Site managers, planners, and SRS stakeholders by providing a general description of the site and land-use factors important to future use decisions and plans. The intent of this document is to be comprehensive in its review of SRS and the surrounding area.

Noah, J.C.

1995-06-29T23:59:59.000Z

165

Field Evaluation of Desiccant-Integrated HVAC Systems: A Review of Case Studies in Multiple Commercial/Institutional Building Types  

E-Print Network (OSTI)

An independent field research effort co-funded by the Gas Research Institute and The U.S. Department of Energy (DOE) Oak Ridge National Laboratory is documenting the performance and energy usage characteristics of active desiccant-integrated HVAC systems at a variety of commercial and institutional facilities. The tests comprise the instrumentation and one-year-plus monitoring of two or more nearly identical sites, one serving as the test site and the others as base-case or control sites. While the research program is ongoing, work completed in two market sectors, retail and lodging, indicates that there are significant comfort control, energy usage and equipment efficiency benefits to be derived from integrating desiccant units into HVAC system design to handle latent and sensible loads independently. In some cases, installed first costs associated with including desiccant units may be lower if the HVAC system is optimized to take advantage of reduced conventional cooling equipment requirements and downsized ductwork In most cases, lower energy consumption and/or reduced energy costs may provide reasonable payback of first cost premiums.

Yborra, S. C.

1998-01-01T23:59:59.000Z

166

doi:10.1155/2011/737543 Review Article IT-Enabled Integration of Renewables: A Concept for the  

E-Print Network (OSTI)

Copyright 2011 Friederich Kupzog et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. The wide utilisation of information and communication technologies is hoped to enable a more efficient and sustainable operation of electric power grids. This paper analyses the benefits of smart power grids for the integration of renewable energy resources into the existing grid infrastructure. Therefore, the concept of a smart power grid is analysed, and it is shown that it covers more than for example, time-of-use energy tariffs. Further, the communication technologies used for smart grids are discussed, and the challenge of interoperability between the smart grid itself and its active contributors such as functional buildings is shown. A significant share of electrical energy demand is and will be constituted by large functional buildings that are mostly equipped with automation systems and therefore enable a relatively simple IT integration into smart grids. This large potential of thermal storages and flexible consumption processes might be a future key to match demand and supply under the presence of a high share of fluctuating generation from renewables. 1.

Smart Power Grid; Friederich Kupzog; Thilo Sauter; Klaus Pollhammer

2010-01-01T23:59:59.000Z

167

Advanced control room design review guidelines: Integration of the NUREG-0700 guidelines and development of new human-system interface guidelines  

Science Conference Proceedings (OSTI)

This report documents the work conducted in four tasks of the Nuclear Regulatory Commission (NRC) project entitled Review Criteria for Human Factors Aspects of Advanced Controls and Instrumentation. The purpose of the first task was to integrate the applicable sections of NUREG-0700 into the advanced control room design review (ACRDR) guidelines to ensure that all applicable guidelines are together in one document and conveniently accessible to users. The primary objective of the second task was to formulate a strategy for the development of new ACRDR guidelines that have not otherwise been identified. The main focus of the third task was to modify the individual ACRDR guidelines generated to date to ensure that they are suitable for the intended nuclear power plant (NPP) control station system application. The goal of the fourth task was to develop human factors guidelines for two human-system interface categories that are missing from the current ACRDR guidelines document. During the first task those areas in NUREG-0700 that are not addressed by the ACRDR guidelines document were identified, the areas were subsequently reviewed against six recent industry human factors engineering review guidelines, and the NUREG-0700 guidelines were updated as necessary. In the second task 13 general categories of human-system interface guidelines that are either missing from or not adequately addressed by the ACRDR document were discovered. An approach was derived for the development of new ACRDR guidelines, a preliminary assessment of the available sources that may be useful in the creation of new guidelines and their applicability to the identified human-system interface categories was performed, and an estimate was made of the amount of time and level of effort required to complete the development of needed new ACRDR guidelines. During the third task those NPP control station systems to which the NUREG-0700 and ACRDR guidelines apply were identified, matrices of such applicability were developed to support the needs of the NRC inspectors and reviewers, a guideline modification audit and tracking system was designed, and the ACRDR guidelines were reviewed and modified where appropriate to ensure that their language is applicable to the nuclear industry. In the fourth task control and input device guidelines were generated and human factors guidelines for specific nuclear operations were drafted.

Carter, R.J.

1997-07-01T23:59:59.000Z

168

South Africa - Greenhouse Gas Emission Baselines and Reduction Potentials  

Open Energy Info (EERE)

Africa - Greenhouse Gas Emission Baselines and Reduction Potentials Africa - Greenhouse Gas Emission Baselines and Reduction Potentials from Buildings Jump to: navigation, search Name South Africa - Greenhouse Gas Emission Baselines and Reduction Potentials from Buildings Agency/Company /Organization United Nations Environment Programme Sector Energy Focus Area Buildings Topics Baseline projection, GHG inventory, Pathways analysis, Background analysis Resource Type Publications Website http://www.unep.org/sbci/pdfs/ Country South Africa UN Region Southern Africa References South Africa - Greenhouse Gas Emission Baselines and Reduction Potentials from Buildings[1] South Africa - Greenhouse Gas Emission Baselines and Reduction Potentials from Buildings Screenshot "This report aims to provide: a summary quantification of the influence of buildings on climate

169

2012 SG Peer Review - GridLAB-D and Integrated T&D Control - David Chassin, PNNL  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

GridLAB-D Analysis of Smart Grids David P. Chassin, PI Pacific Northwest National Laboratory June 7, 2012 !& =;;A & 5 " /'' # !&( &' Objective Life-cycle Funding Summary ($K) Prior to FY12 FY12 authorized FY13 requested *Out-year(s) $4,500 $1,425 $1,330 GridLAB-D Base $400 $400/yr NRECA $150 Micro-Grid Controls $240 Camp Smith Modeling $240 Integrated T&D Control $300 *Out-year(s) funding does not include new starts beyond FY13. Technical Scope Use GridLAB-D to quantify the impact of smart grid technologies, such as microgrids, distributed renewables, and new advanced load control strategies. GridLAB-D can simulation these different technologies in an accelerated time-frame to help

170

2012 CERTS R&M Peer Review - Renewable Integration Through Risk-Limiting Dispatch - Pravin Varaiya  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

o o Summary of Research Introduction Modeling Scheduling Policies Simulations Conclusion Renewable Integration through Risk-Limiting Dispatch and Coordinated Resource Aggregation Anand Subramanian, Pravin Varaiya, Felix Wu, Kameshwar Poolla UC Berkeley CERTS 2012 August 7, 2012 o Summary of Research Introduction Modeling Scheduling Policies Simulations Conclusion Collaborators The Team Faculty: Pravin Varaiya, Felix Wu, Kameshwar Poolla, Eilyan Bitar, Ram Rajagopal Post-docs/Grad Students: Josh Taylor, Manuel Garcia, Anand Subramanian Valuable Input from: Duncan Callaway Pramod Khargonekar Alejandro Dom´ ınguez-Garc´ ıa o Summary of Research Introduction Modeling Scheduling Policies Simulations Conclusion Risk Limiting Dispatch (RLD) Issues with current dispatch rules Sub-optimal staggering of markets Decoupled dispatch Static reliability criteria

171

ProgramTopics Baseline projection | Open Energy Information  

Open Energy Info (EERE)

Next (20 | 50 | 100 | 250 | 500) Africa-Economic Development Report 2010 + Baselines for Greenhouse Gas Reductions: Problems, Precedents, Solutions + Bottom-Up Energy Analysis...

172

NETL: Energy Analyses - Cost and Performance Baseline for Fossil...  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Analyses Cost and Performance Baselines for Fossil Energy Plants Overview The studies listed on this page establish estimates for the cost and performance of combustion and...

173

California Baseline Energy Demands to 2050 for Advanced Energy Pathways  

E-Print Network (OSTI)

for baseline scenario. Climate zone Electricity planningarea Natural gas planning area Climate zone1 Climate zone 2 Pacific Gas & Electric Climate zone 3 (

McCarthy, Ryan; Yang, Christopher; Ogden, Joan M.

2008-01-01T23:59:59.000Z

174

Atlantic NAD 83 SLA Baseline Tangents | Data.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

SLA Baseline Tangents Ocean Data Tools Technical Guide Map Gallery Regional Planning Feedback Ocean You are here Data.gov Communities Ocean Data Atlantic NAD 83 SLA...

175

Baseline Characteristics of the 2002-2004 Nonresidential Sector...  

NLE Websites -- All DOE Office Websites (Extended Search)

Alliance study intended to improve understanding of the new commercial building stock in the Pacific Northwest region. It provided a new regional baseline for practices in...

176

UNFCCC-Consolidated baseline and monitoring methodology for landfill...  

Open Energy Info (EERE)

Facebook icon Twitter icon UNFCCC-Consolidated baseline and monitoring methodology for landfill gas project activities Jump to: navigation, search Tool Summary LAUNCH TOOL Name:...

177

Spent Nuclear Fuel Project technical baseline document. Fiscal year 1995: Volume 1, Baseline description  

SciTech Connect

This document is a revision to WHC-SD-SNF-SD-002, and is issued to support the individual projects that make up the Spent Nuclear Fuel Project in the lower-tier functions, requirements, interfaces, and technical baseline items. It presents results of engineering analyses since Sept. 1994. The mission of the SNFP on the Hanford site is to provide safety, economic, environmentally sound management of Hanford SNF in a manner that stages it to final disposition. This particularly involves K Basin fuel, although other SNF is involved also.

Womack, J.C. [Westinghouse Hanford Co., Richland, WA (United States); Cramond, R. [TRW (United States); Paedon, R.J. [SAIC (United States)] [and others

1995-03-13T23:59:59.000Z

178

Baseline Carbon Storage, Carbon Sequestration, and Greenhouse-Gas  

E-Print Network (OSTI)

Baseline Carbon Storage, Carbon Sequestration, and Greenhouse-Gas Fluxes in Terrestrial Ecosystems, and Benjamin M. Sleeter Chapter 5 of Baseline and Projected Future Carbon Storage and Greenhouse-Gas Fluxes, carbon sequestration, and greenhouse-gas fluxes in terrestrial ecosystems of the Western United States

Fleskes, Joe

179

THE DEVELOPMENT OF A 1990 INDUSTRIAL ENERGY USE BASELINE  

E-Print Network (OSTI)

to determine total energy consumption for that industry. However, if specific energy intensities per unit consumption, and emissions generated by energy consumption, a comprehensive, baseline data set of industrial branches of Canadian industry, forms the goal of this report. An adequate baseline energy consumption

180

South Africa-Danish Government Baseline Workstream | Open Energy  

Open Energy Info (EERE)

Danish Government Baseline Workstream Danish Government Baseline Workstream Jump to: navigation, search Name South Africa-Danish Government Baseline Workstream Agency/Company /Organization Danish Government Partner Danish Ministry for Climate, Energy, and Building; The Danish Energy Agency Sector Energy Topics Implementation, Low emission development planning Program Start 2011 Country South Africa Southern Africa References Denmark[1] Overview Progress and Outcomes Capacity building needs identified are lessons learned, challenges and gaps, including those that may be common between countries, and aspects of good practice for assumptions, methodologies and other aspects of baseline setting. References ↑ "Denmark" Retrieved from "http://en.openei.org/w/index.php?title=South_Africa-Danish_Government_Baseline_Workstream&oldid=699933"

Note: This page contains sample records for the topic "integrated baseline review" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Thailand-Danish Government Baseline Workstream | Open Energy Information  

Open Energy Info (EERE)

Thailand-Danish Government Baseline Workstream Thailand-Danish Government Baseline Workstream Jump to: navigation, search Name Thailand-Danish Government Baseline Workstream Agency/Company /Organization Danish Government Partner Danish Ministry for Climate, Energy, and Building; The Danish Energy Agency Sector Energy Topics Implementation, Low emission development planning Program Start 2011 Country Thailand South-Eastern Asia References Denmark[1] Overview Progress and Outcomes Capacity building needs identified are lessons learned, challenges and gaps, including those that may be common between countries, and aspects of good practice for assumptions, methodologies and other aspects of baseline setting. References ↑ "Denmark" Retrieved from "http://en.openei.org/w/index.php?title=Thailand-Danish_Government_Baseline_Workstream&oldid=699937

182

Mexico-Danish Government Baseline Workstream | Open Energy Information  

Open Energy Info (EERE)

Mexico-Danish Government Baseline Workstream Mexico-Danish Government Baseline Workstream Jump to: navigation, search Name Mexico-Danish Government Baseline Workstream Agency/Company /Organization Danish Government Partner Danish Ministry for Climate, Energy, and Building; The Danish Energy Agency Sector Energy Topics Implementation, Low emission development planning Program Start 2011 Country Mexico Central America References Denmark[1] Overview Progress and Outcomes Capacity building needs identified are lessons learned, challenges and gaps, including those that may be common between countries, and aspects of good practice for assumptions, methodologies and other aspects of baseline setting. References ↑ "Denmark" Retrieved from "http://en.openei.org/w/index.php?title=Mexico-Danish_Government_Baseline_Workstream&oldid=699931

183

UNFCCC-Consolidated baseline and monitoring methodology for landfill gas  

Open Energy Info (EERE)

UNFCCC-Consolidated baseline and monitoring methodology for landfill gas UNFCCC-Consolidated baseline and monitoring methodology for landfill gas project activities Jump to: navigation, search Tool Summary LAUNCH TOOL Name: UNFCCC-Consolidated baseline and monitoring methodology for landfill gas project activities Agency/Company /Organization: United Nations Framework Convention on Climate Change (UNFCCC) Sector: Climate, Energy Focus Area: Renewable Energy, Non-renewable Energy, - Landfill Gas Topics: Baseline projection, GHG inventory Resource Type: Guide/manual Website: cdm.unfccc.int/public_inputs/meth/acm0001/index.html Cost: Free Language: English References: UNFCCC-Consolidated baseline and monitoring methodology for landfill gas project activities[1] This article is a stub. You can help OpenEI by expanding it. References

184

Brazil-Danish Government Baseline Workstream | Open Energy Information  

Open Energy Info (EERE)

Brazil-Danish Government Baseline Workstream Brazil-Danish Government Baseline Workstream Jump to: navigation, search Name Brazil-Danish Government Baseline Workstream Agency/Company /Organization Danish Government Partner Danish Ministry for Climate, Energy, and Building; The Danish Energy Agency Sector Energy Topics Implementation, Low emission development planning Program Start 2011 Country Brazil South America References Denmark[1] Overview Progress and Outcomes Capacity building needs identified are lessons learned, challenges and gaps, including those that may be common between countries, and aspects of good practice for assumptions, methodologies and other aspects of baseline setting. References ↑ "Denmark" Retrieved from "http://en.openei.org/w/index.php?title=Brazil-Danish_Government_Baseline_Workstream&oldid=699917"

185

Guidance for Developing Baseline and Annual Water Use | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Guidance for Developing Baseline and Annual Water Use Guidance for Developing Baseline and Annual Water Use Guidance for Developing Baseline and Annual Water Use Potable water use intensity is defined as annual potable water use divided by total gross square footage of facility space (gal/ft2). The facility gross square footage is the same value used for energy use intensity reduction goals. Executive Order (E.O.) 13423 requires Federal agencies to develop a potable water use intensity baseline for fiscal year (FY) 2007. Agencies must report total potable water consumption and gross facility square footage against that baseline. To avoid additional reporting requirements, E.O. 13423 does not require agencies to report square footage of irrigated turf or landscape. Potable water used for landscape irrigation must be reported in total potable water

186

Vietnam-Danish Government Baseline Workstream | Open Energy Information  

Open Energy Info (EERE)

Vietnam-Danish Government Baseline Workstream Vietnam-Danish Government Baseline Workstream Jump to: navigation, search Name Vietnam-Danish Government Baseline Workstream Agency/Company /Organization Danish Government Partner Danish Ministry for Climate, Energy, and Building; The Danish Energy Agency Sector Energy Topics Implementation, Low emission development planning Program Start 2011 Country Vietnam South-Eastern Asia References Denmark[1] Overview Progress and Outcomes Capacity building needs identified are lessons learned, challenges and gaps, including those that may be common between countries, and aspects of good practice for assumptions, methodologies and other aspects of baseline setting. References ↑ "Denmark" Retrieved from "http://en.openei.org/w/index.php?title=Vietnam-Danish_Government_Baseline_Workstream&oldid=699935"

187

Chile-Danish Government Baseline Workstream | Open Energy Information  

Open Energy Info (EERE)

Chile-Danish Government Baseline Workstream Chile-Danish Government Baseline Workstream Jump to: navigation, search Name Chile-Danish Government Baseline Workstream Agency/Company /Organization Danish Government Partner Danish Ministry for Climate, Energy, and Building; The Danish Energy Agency Sector Energy Topics Implementation, Low emission development planning Program Start 2011 Country Chile South America References Denmark[1] Overview Progress and Outcomes Capacity building needs identified are lessons learned, challenges and gaps, including those that may be common between countries, and aspects of good practice for assumptions, methodologies and other aspects of baseline setting. References ↑ "Denmark" Retrieved from "http://en.openei.org/w/index.php?title=Chile-Danish_Government_Baseline_Workstream&oldid=699919"

188

Kenya-Danish Government Baseline Workstream | Open Energy Information  

Open Energy Info (EERE)

Kenya-Danish Government Baseline Workstream Kenya-Danish Government Baseline Workstream Jump to: navigation, search Name Kenya-Danish Government Baseline Workstream Agency/Company /Organization Danish Government Partner Danish Ministry for Climate, Energy, and Building; The Danish Energy Agency Sector Energy Topics Implementation, Low emission development planning Program Start 2011 Country Kenya Eastern Africa References Denmark[1] Overview Progress and Outcomes Capacity building needs identified are lessons learned, challenges and gaps, including those that may be common between countries, and aspects of good practice for assumptions, methodologies and other aspects of baseline setting. References ↑ "Denmark" Retrieved from "http://en.openei.org/w/index.php?title=Kenya-Danish_Government_Baseline_Workstream&oldid=699929"

189

Status of The US Long Baseline Neutrino Experiment Study  

Science Conference Proceedings (OSTI)

The US Long Baseline Neutrino Experiment Study was commissioned jointly by Brookhaven National Laboratory and Fermi National Accelerator Laboratory to investigate the potential for future U.S. based long baseline neutrino oscillation experiments beyond the currently planned program. The Study focused on MW class conventional neutrino beams that can be produced at Fermilab or BNL. The experimental baselines are based on two possible detector locations: 1) off?axis to the existing Fermilab NuMI beamline at baselines of 700 to 810 km and 2) NSF's proposed future Deep Underground Science and Engineering Laboratory (DUSEL) at baselines greater than 1000 km. Two detector technologies are considered: a megaton class Water Cherenkov detector deployed deep underground at a DUSEL site

Mary Bishai; study group

2007-01-01T23:59:59.000Z

190

China-Danish Government Baseline Workstream | Open Energy Information  

Open Energy Info (EERE)

China-Danish Government Baseline Workstream China-Danish Government Baseline Workstream Jump to: navigation, search Name China-Danish Government Baseline Workstream Agency/Company /Organization Danish Government Partner Danish Ministry for Climate, Energy, and Building; The Danish Energy Agency Sector Energy Topics Implementation, Low emission development planning Program Start 2011 Country China Eastern Asia References Denmark[1] Overview Progress and Outcomes Capacity building needs identified are lessons learned, challenges and gaps, including those that may be common between countries, and aspects of good practice for assumptions, methodologies and other aspects of baseline setting. References ↑ "Denmark" Retrieved from "http://en.openei.org/w/index.php?title=China-Danish_Government_Baseline_Workstream&oldid=699921"

191

India-Danish Government Baseline Workstream | Open Energy Information  

Open Energy Info (EERE)

India-Danish Government Baseline Workstream India-Danish Government Baseline Workstream Jump to: navigation, search Name India-Danish Government Baseline Workstream Agency/Company /Organization Danish Government Partner Danish Ministry for Climate, Energy, and Building; The Danish Energy Agency Sector Energy Topics Implementation, Low emission development planning Program Start 2011 Country India Southern Asia References Denmark[1] Overview Progress and Outcomes Capacity building needs identified are lessons learned, challenges and gaps, including those that may be common between countries, and aspects of good practice for assumptions, methodologies and other aspects of baseline setting. References ↑ "Denmark" Retrieved from "http://en.openei.org/w/index.php?title=India-Danish_Government_Baseline_Workstream&oldid=699927"

192

Statistical Analysis of Baseline Load Models for Non-Residential Buildings  

E-Print Network (OSTI)

estimation of the baseline load profile. In this paper, weDemand response, Baseline load profile, Impacts estimationto as the baseline load profile (or baseline) and is key to

Coughlin, Katie

2012-01-01T23:59:59.000Z

193

Baseline design/economics for advanced Fischer-Tropsch technology. Quarterly report, January--March 1992  

DOE Green Energy (OSTI)

The objectives of the study are to: Develop a baseline design for indirect liquefaction using advanced Fischer-Tropsch (F-T) technology. Prepare the capital and operating costs for the baseline design. Develop a process flow sheet simulation (PFS) model. This report summarizes the activities completed during the period December 23, 1992 through March 15, 1992. In Task 1, Baseline Design and Alternates, the following activities related to the tradeoff studies were completed: approach and basis; oxygen purity; F-T reactor pressure; wax yield; autothermal reformer; hydrocarbons (C{sub 3}/C{sub 4}s) recovery; and hydrogenrecovery. In Task 3, Engineering Design Criteria, activities were initiated to support the process tradeoff studies in Task I and to develop the environmental strategy for the Illinois site. The work completed to date consists of the development of the F-T reactor yield correlation from the Mobil dam and a brief review of the environmental strategy prepared for the same site in the direct liquefaction baseline study.Some work has also been done in establishing site-related criteria, in establishing the maximum vessel diameter for train sizing and in coping with the low H{sub 2}/CO ratio from the Shell gasifier. In Task 7, Project Management and Administration, the following activities were completed: the subcontract agreement between Amoco and Bechtel was negotiated; a first technical progress meeting was held at the Bechtel office in February; and the final Project Management Plan was approved by PETC and issued in March 1992.

Not Available

1992-09-01T23:59:59.000Z

194

Hanford Site waste treatment/storage/disposal integration  

SciTech Connect

In 1998 Waste Management Federal Services of Hanford, Inc. began the integration of all low-level waste, mixed waste, and TRU waste-generating activities across the Hanford site. With seven contractors, dozens of generating units, and hundreds of waste streams, integration was necessary to provide acute waste forecasting and planning for future treatment activities. This integration effort provides disposition maps that account for waste from generation, through processing, treatment and final waste disposal. The integration effort covers generating facilities from the present through the life-cycle, including transition and deactivation. The effort is patterned after the very successful DOE Complex EM Integration effort. Although still in the preliminary stages, the comprehensive onsite integration effort has already reaped benefits. These include identifying significant waste streams that had not been forecast, identifying opportunities for consolidating activities and services to accelerate schedule or save money; and identifying waste streams which currently have no path forward in the planning baseline. Consolidation/integration of planned activities may also provide opportunities for pollution prevention and/or avoidance of secondary waste generation. A workshop was held to review the waste disposition maps, and to identify opportunities with potential cost or schedule savings. Another workshop may be held to follow up on some of the long-term integration opportunities. A change to the Hanford waste forecast data call would help to align the Solid Waste Forecast with the new disposition maps.

MCDONALD, K.M.

1999-02-24T23:59:59.000Z

195

GRI baseline projection: Forecast summary 1996 edition. Topical report, January-December 1995  

SciTech Connect

The report summarizes the 1996 Edition of the GRI Baseline Projection. DRI/McGraw-Hill`s Energy Group (DRI) maintains an energy modeling system for the Gas Research Institute (GRI) that is used to produce an annual projection of the supply and demand for energy by regions in the United States. The 1996 Edition of the GRI Baseline Projection is produced using several different models. The models analyze various pieces of the U.S. energy markets and their solutions are based on a framework of exogenous assumptions provided by GRI. The report describes the integration and solution procedures of the models and the assumptions used to produce the 1995 Edition of the GRI Gaseline Projection.

Baxter, R.P.; Mendelsohn, M.; Nottingham, R.P.; Rhodes, M.R.

1996-04-01T23:59:59.000Z

196

GRI baseline projection: Methodology and assumptions 1996 edition. Topical report, January-December 1995  

Science Conference Proceedings (OSTI)

The report documents the methodology employed in producing the 1996 Edition of the GRI Baseline Projection. DRI/McGraw-Hill`s Energy Group (DRI) maintains an energy modeling system for the Gas Research Institute (GRI) that is used to produce an annual projection of the supply and demand for energy by regions in the United States. The 1996 Edition of the GRI Baseline Projection is produced using several different models. The models analyze various pieces of the U.S. energy markets and their solutions are based on a framework of exogenous assumptions provided by GRI. The report describes the integration and solution procedures of the models and the assumptions used to produce the final projection results.

Rhodes, M.R.; Baxter, R.P.; Nottingham, R.P.

1996-04-01T23:59:59.000Z

197

GRI baseline projection: Methodology and assumptions 1995 edition. Topical report, January-December 1994  

SciTech Connect

The report documents the methodology employed in producing the 1995 Edition of the GRI Baseline Projection. DRI/McGraw-Hill`s Energy Group (DRI) maintains an energy modeling system for the Gas Research Institute (GRI) that is used to produce an annual projection of the supply and demand for energy by regions in the United States. The 1995 Edition of the GRI Baseline Projection is produced using several different models. The models analyze various pieces of the U.S. energy markets and their solutions are based on a framework of exogeneous assumptions provided by GRI. The report describes the integration and solution procedures of the models and the assumptions used to produce the final projection results.

Baxter, R.P.; Silveira, T.S.; Harshbarger, S.L.

1995-02-01T23:59:59.000Z

198

Estimation of Energy Baseline by Simulation for On-going Commissioning and Energy Saving Retrofit  

E-Print Network (OSTI)

This paper proposes a method of estimating the adjusted energy baseline using simulation models, which can calculate the energy baseline with various conditions, such as conditions of weather, occupancy and equipment operations. Especially, this paper reveals what detailed data the calibration of the model needs and the change of accuracy caused by different calibration data. Using the operational data of a middle-scale office building in Osaka Japan, the simulation accuracies of three models, which are calibrated using monthly energy consumptions of whole building (Level 1), monthly energy consumptions of subsystems (Level 2) and the detailed operational data of equipments (Level 3) respectively, are compared. The result shows that the differences of daily-integrated energy consumptions between measured value and simulated value using the model of Level 1 and 2 are not much different. The model of Level 3 is about 3% more accurate than the model of Level 1 and 2.

Miyata, M.; Yoshida, H.; Asada, M.; Iwata, T.; Tanabe, Y.; Yanagisawa, T.

2006-01-01T23:59:59.000Z

199

PARS II Process Document OVERTARGET BASELINE (OTB) REPORTING IN PARS II  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Process Document Process Document OVERTARGET BASELINE (OTB) REPORTING IN PARS II PURPOSE The purpose of this document is to describe the process by which contractors should conduct OTB reporting after OTB on the project was approved and implemented in the contractor system. SCOPE This process applies to projects on which OVERTARGET BASELINE (OTB) was approved and implemented and identifies data elements, information, and processes by which contractor should report changes related to OTB in PARS II. PROCESS Upon implementation of OTB, the following data elements must be provided by the contractor into PARS II. Contractor should validate accuracy of the data in each identified field by reviewing EV_CPR_HEADER table of the PARS II Upload Template file. * OTB/OTS Date: Date when OTB/OTS was implemented in contractor system. If this data element does

200

Systems Integration and the Department of Energy's Hydrogen Program: Preprint  

DOE Green Energy (OSTI)

This paper discusses how the Systems Integration Office assists the Department of Energy's Hydrogen Program by using an integrated baseline approach to identify, define, and analyze requirements and tasks to achieve program goals.

Duffy, M. A.

2007-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "integrated baseline review" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Information architecture. Volume 2, Part 1: Baseline analysis summary  

SciTech Connect

The Department of Energy (DOE) Information Architecture, Volume 2, Baseline Analysis, is a collaborative and logical next-step effort in the processes required to produce a Departmentwide information architecture. The baseline analysis serves a diverse audience of program management and technical personnel and provides an organized way to examine the Department`s existing or de facto information architecture. A companion document to Volume 1, The Foundations, it furnishes the rationale for establishing a Departmentwide information architecture. This volume, consisting of the Baseline Analysis Summary (part 1), Baseline Analysis (part 2), and Reference Data (part 3), is of interest to readers who wish to understand how the Department`s current information architecture technologies are employed. The analysis identifies how and where current technologies support business areas, programs, sites, and corporate systems.

NONE

1996-12-01T23:59:59.000Z

202

NACP Aboveground Biomass and Carbon Baseline Data, V.2 (NBCD...  

NLE Websites -- All DOE Office Websites (Extended Search)

Aboveground Biomass and Carbon Baseline Data, Version. 2 (NBCD 2000), U.S.A., 2000 Get Data Revision date: May 24, 2013 Summary: The NBCD 2000 (National Biomass and Carbon...

203

General Merchandise 2009 TSD Miami Low Plug Load Baseline | Open...  

Open Energy Info (EERE)

Type Mercantile (Retail Other Than Mall) Model Type Baseline Model Target Type ASHRAE 90.1 2004 Model Year 2009 IDF file http:apps1.eere.energy.govbuildingsenergyplus...

204

General Merchandise 2009 TSD Miami High Plug Load Baseline |...  

Open Energy Info (EERE)

Type Baseline Model Target Type ASHRAE 90.1 2004 Model Year 2009 IDF file http:apps1.eere.energy.govbuildingsenergyplusmodelsMiami2009TSDGeneralMerchHPLbaseline.idf XML...

205

General Merchandise 2009 TSD Chicago High Plug Load Baseline...  

Open Energy Info (EERE)

Type Baseline Model Target Type ASHRAE 90.1 2004 Model Year 2009 IDF file http:apps1.eere.energy.govbuildingsenergyplusmodelsChicago2009TSDGeneralMerchHPLBaseline.idf...

206

Updated Costs (June 2011 Basis) for Selected Bituminous Baseline...  

NLE Websites -- All DOE Office Websites (Extended Search)

were also closer in size to the baseline cases. * Cases 1, 2, 13 and 14, Account 8.3 (Condenser and Auxiliaries): The condenser costs were re-calibrated using a series of more...

207

Establish Employee Commuting Behavior Baseline for Greenhouse Gas Profile |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Establish Employee Commuting Behavior Baseline for Greenhouse Gas Establish Employee Commuting Behavior Baseline for Greenhouse Gas Profile Establish Employee Commuting Behavior Baseline for Greenhouse Gas Profile October 7, 2013 - 1:49pm Addthis YOU ARE HERE Step 2 For evaluating a greenhouse gas (GHG) profile, once employee commuting survey data are collected and priority worksites have been identified, the survey responses should be analyzed for each major worksite to establish a behavior baseline. Depending on the agency's size and where it places accountability for GHG commuting emissions reduction goals, it may be to most appropriate to have individual programs or operating units assess their own employee commute data. Exceptions should be made when programs share facilities. For example, at a headquarters office building, a single program may take

208

REMOTE SENSING FOR ENVIRONMENTAL BASELINING AND MONITORING D. B. Reister  

E-Print Network (OSTI)

and monitor environmental issues. By understanding environmental conditions, capital and remediation projects can be accelerated, saving millions of dollars. By monitoring conditions more closelyREMOTE SENSING FOR ENVIRONMENTAL BASELINING AND MONITORING D. B. Reister Oak Ridge National

209

Hybrid Electric Vehicle Fleet and Baseline Performance Testing  

NLE Websites -- All DOE Office Websites (Extended Search)

Baseline performance testing new HEVs Fleet testing (160k miles in 36 months) End-of-life testing (fuel economy & battery testing at 160k miles) WWW information location 3...

210

Understanding the Effect of Baseline Modeling Implementation Choices on  

NLE Websites -- All DOE Office Websites (Extended Search)

Understanding the Effect of Baseline Modeling Implementation Choices on Understanding the Effect of Baseline Modeling Implementation Choices on Analysis of Demand Response Performance Title Understanding the Effect of Baseline Modeling Implementation Choices on Analysis of Demand Response Performance Publication Type Conference Paper LBNL Report Number LBNL-5560E Year of Publication 2013 Authors Addy, Nathan, Johanna L. Mathieu, Sila Kiliccote, and Duncan S. Callaway Conference Name ASME 2013 International Mechanical Engineering Congress & Exposition Conference Location Houston, TX Keywords market sectors, technologies Abstract Accurate evaluation of the performance of buildings participating in Demand Response (DR) programs is critical to the adoption and improvement of these programs. Typically, we calculate load sheds during DR events by comparing observed electric demand against counterfactual predictions made using statistical baseline models. Many baseline models exist and these models can produce different shed calculations. Moreover, modelers implementing the same baseline model can make different modeling implementation choices, which may affect shed estimates. In this work, using real data, we analyze the effect of different modeling implementation choices on shed predictions. We focused on five issues: weather data source, resolution of data, methods for determining when buildings are occupied, methods for aligning building data with temperature data, and methods for power outage filtering. Results indicate sensitivity to the weather data source and data filtration methods as well as an immediate potential for automation of methods to choose building occupied modes.

211

STATUS OF THE US LONG BASELINE NEUTRINO EXPERIMENT STUDY.  

SciTech Connect

The US Long Baseline Neutrino Experiment Study was commissioned jointly by Brookhaven National Laboratory and Fermi National Accelerator Laboratory to investigate the potential for future U.S. based long baseline neutrino oscillation experiments beyond the currently planned program. The Study focused on MW class convention at neutrino beams that can be produced at Fermilab or BNL. The experimental baselines are based on two possible detector locations: (1) off-axis to the existing Fermilab NuMI beamline at baselines of 700 to 810 km and (2) NSF's proposed future Deep Underground Science and Engineering Laboratory (DUSEL) at baselines greater than 1000 km. Two detector technologies are considered: a megaton class Water Cherenkov detector deployed deep underground at a DUSEL site, or a 100kT Liquid Argon Time-Projection Chamber (TPC) deployed on the surface at any of the proposed sites. The physics sensitivities of the proposed experiments are summarized. We find that conventional horn focused wide-band neutrino beam options from Fermilab or BNL aimed at a massive detector with a baseline of > 1000 km have the best sensitivity to CP violation and the neutrino mass hierarchy for values of the mixing angle {theta}{sub 13} down to 2.2{sup o}.

BISHAI,M.

2006-09-21T23:59:59.000Z

212

Energy Systems Integration | OpenEI Community  

Open Energy Info (EERE)

Systems Integration Home > Energy Systems Integration > Posts by term Content Group Activity By term Q & A Feeds developer (1) ESI (1) Literature Review (5) Maintenance (1)...

213

NETL: 2010 - Independent Peer Reviews of NETL Technology Programs  

NLE Websites -- All DOE Office Websites (Extended Search)

- Independent Peer Reviews of NETL Technology Programs Advanced Integrated Gasification Combined Cycle (AIGCC) Peer Review Advanced Integrated Gasification Combined Cycle (AIGCC)...

214

Integrated Project Team RM  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Integrated Project Team (IPT) Review Module Integrated Project Team (IPT) Review Module March 2010 CD-0 This R O 0 Review Modul OFFICE OF Inte C CD-1 le was piloted F ENVIRO Standard R grated P Rev Critical Decis CD-2 M at the OR U 23 incorporated ONMENTAL Review Plan Project Te view Module sion (CD) Ap CD March 2010 33 Disposition in the Review L MANAGE n (SRP) eam (IPT e pplicability D-3 Project in 200 Module. EMENT T) CD-4 09. Lessons lea Post Ope arned have been eration n Standard Review Plan, 2 nd Edition, March 2010 i FOREWORD The Standard Review Plan (SRP) 1 provides a consistent, predictable corporate review framework to ensure that issues and risks that could challenge the success of Office of Environmental Management (EM) projects are identified early and addressed proactively. The internal EM

215

Develop baseline computational model for proactive welding stress  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Develop baseline computational model for proactive welding stress Develop baseline computational model for proactive welding stress management to suppress helium induced cracking during weld repair Develop baseline computational model for proactive welding stress management to suppress helium induced cracking during weld repair There are over 100 nuclear power plants operating in the U.S., which generate approximately 20% of the nation's electricity. These plants range from 15 to 40 years old. Extending the service lives of the current fleet of nuclear power plants beyond 60 years is imperative to allow for the environmentally-sustainable energy infrastructure being developed and matured. Welding repair of irradiated nuclear reactor materials (such as austenitic stainless steels) is especially challenging because of the

216

Fermilab | Recovery Act | Long-baseline neutrino research  

NLE Websites -- All DOE Office Websites (Extended Search)

Long-baseline neutrino research Long-baseline neutrino research The proposed long-baseline neutrino project will place a particle detector at great depth underground to study neutrinos from an intense beam generated several states away. Researchers from six American laboratories and more than two dozen universities, most in the United States, have proposed plans to generate an intense beam of neutrinos at Fermilab and to place the detector in the Homestake Gold Mine near Lead, South Dakota. It would be the world's deepest underground laboratory, hosting experiments as deep as 8,000 feet underground. Neutrinos are the most abundant but perhaps least understood particles in our galaxy. Scientists hope to observe the neutrinos changing from one type to another as they travel. Studying a neutrino beam at two locations a

217

SEEC- Regional Energy Baselines and Measurement and Verification Protocols  

E-Print Network (OSTI)

The Southern Energy Efficiency Center (SEEC) was established to substantially increase the deployment of high-performance beyond-code buildings across the southern region of the U.S, funded by the U.S. Department of Energy (DOE) Building Technologies Program and is administered by the National Energy Technology Laboratory. During its first 18-month phase, to address efficiency goals of states, utilities, and various energy-efficiency programs; project efforts include defining the baseline energy patterns within the project region and the measurement and verification (M&V) protocols for use in determining the efficiency improvements SEEC, state and USDOE efforts with respect to that baseline. This work is defined under the SEEC Subtask 3.1 Define Regional Baselines and Measurement & Verification Protocols. This report presents preliminary deliverables of this subtask developed and documented by the Energy Systems Laboratory (ESL) for use by the SEEC member state region.

Kim, H.; Haberl, J. S.; Verdict, M.

2009-03-01T23:59:59.000Z

218

Independent Oversight Review, Portsmouth Gaseous Diffusion Plant- April 2013  

Energy.gov (U.S. Department of Energy (DOE))

Review of the Integrated Safety Management System Phase I Verification Review at the Portsmouth Gaseous Diffusion Plant

219

Salton Sea sampling program: baseline and toxicity studies  

DOE Green Energy (OSTI)

Baseline data on several of the Salton Sea fishes are reported. Morphometric (dimensions) and meristic (counting elements) data are presented as a baseline to evaluate any accumulation and physiological stresses that the fishes may experience as a result of geothermal development. Trace elements were analyzed in selected tissues or whole fish. The trace elements evaluated were K, Cu, Fe, Cu, Zn, Br, Rb, Sr, and Pb. The major fishes studied were corvina (Cynoscion xanthulus), gulf coaker (Bairdiella icistius, and molly (Poecilia latapinna). Other fishes occasionally tested were Tilapia sp. and sargo (Anisotremus davidsonii).

Tullis, R.E.

1977-09-30T23:59:59.000Z

220

BNL VERY LONG BASELINE EXPERIMENT WITH A SUPER NEUTRINO BEAM.  

SciTech Connect

An upgrade to the BNL AGS could produce a very intense proton source at a relatively low cost. This proton source could produce a conventional neutrino beam with a very significant flux at large distances from the laboratory. In this paper we examine the possibility of using this neutrino beam for a very long baseline oscillation experiment where a 500 kiloton water Cherenkov detector is situated at the Homestake mine in South Dakota. We study the physics potential of a high intensity neutrino oscillation experiment with a 2540 km baseline and a peak neutrino energy of {approx}1 GeV.

KAHN,S.A.

2003-11-18T23:59:59.000Z

Note: This page contains sample records for the topic "integrated baseline review" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

THE FIRST VERY LONG BASELINE INTERFEROMETRIC SETI EXPERIMENT  

SciTech Connect

The first Search for Extra-Terrestrial Intelligence (SETI) conducted with very long baseline interferometry (VLBI) is presented. By consideration of the basic principles of interferometry, we show that VLBI is efficient at discriminating between SETI signals and human generated radio frequency interference (RFI). The target for this study was the star Gliese 581, thought to have two planets within its habitable zone. On 2007 June 19, Gliese 581 was observed for 8 hr at 1230-1544 MHz with the Australian Long Baseline Array. The data set was searched for signals appearing on all interferometer baselines above five times the noise limit. A total of 222 potential SETI signals were detected and by using automated data analysis techniques were ruled out as originating from the Gliese 581 system. From our results we place an upper limit of 7 MW Hz{sup -1} on the power output of any isotropic emitter located in the Gliese 581 system within this frequency range. This study shows that VLBI is ideal for targeted SETI including follow-up observations. The techniques presented are equally applicable to next-generation interferometers, such as the long baselines of the Square Kilometre Array.

Rampadarath, H.; Morgan, J. S.; Tingay, S. J.; Trott, C. M., E-mail: hayden.rampadarath@icrar.org [International Centre for Radio Astronomy Research, Curtin University, GPO Box U1987, Perth, WA (Australia)

2012-08-15T23:59:59.000Z

222

Baseline Gas Turbine Development Program. Eleventh quarterly progress report  

DOE Green Energy (OSTI)

Progress is reported for a program to demonstrate by 1976 an experimental gas turbine powered automobile which meets the 1978 Federal Emissions Standards, has significantly improved fuel economy, and is competitive in performance, reliability, and potential manufacturing cost with the conventional piston engine powered, standard size American automobile. NASA completed initial heat balance testing of a baseline engine. An additional 450 hours were run on ceramic regenerators and seals. Seal wear rates are very good, and the elastomeric mounting system was satisfactory. An engine/control oil supply system based on the power steering pump is successfully operating in baseline vehicles. The design of the upgraded engine power turbine nozzle actuator was finalized, and layouts of the inlet guide vane actuator are in process. A lock-up torque converter was installed in the free rotor vehicle. Baseline engine and vehicle testing of water injection and variable inlet guide vanes was completed. A thermal analysis of the gas generator is in process. A steady-state, full power analysis was made. A three-dimensional stress analysis of the compressor cover was made. The power turbine nozzle actuating system layout was completed. The analytical studies of the power turbine rotor bearings were completed. MTI completed the design of the gas generator rotor simulation fixture and is starting to build it. Optimized reduction gears were successfully tested in a baseline engine.

Schmidt, F.W.; Wagner, C.E.

1975-07-31T23:59:59.000Z

223

NERC ECONOMIC IMPACT BASELINE 2007-08 Executive Summary  

E-Print Network (OSTI)

1 NERC ECONOMIC IMPACT BASELINE 2007-08 Executive Summary The Natural Environment Research Council environmental markets. NERC provides timely forewarning of major environmental changes allowing the UK economy highly skilled people to the labour market · Improving the performance of existing businesses · Improving

Edinburgh, University of

224

241-AZ Farm Annulus Extent of Condition Baseline Inspection  

Science Conference Proceedings (OSTI)

This report provides the results of the comprehensive annulus visual inspection for tanks 241- AZ-101 and 241-AZ-102 performed in fiscal year 2013. The inspection established a baseline covering about 95 percent of the annulus floor for comparison with future inspections. Any changes in the condition are also included in this document.

Engeman, Jason K.; Girardot, Crystal L.; Vazquez, Brandon J.

2013-05-15T23:59:59.000Z

225

Technical Baseline Summary Description for the Tank Farm Contractor  

Science Conference Proceedings (OSTI)

This document is a revision of the document titled above, summarizing the technical baseline of the Tank Farm Contractor. It is one of several documents prepared by CH2M HILL Hanford Group, Inc. to support the U.S. Department of Energy Office of River Protection Tank Waste Retrieval and Disposal Mission at Hanford.

TEDESCHI, A.R.

2000-04-21T23:59:59.000Z

226

Mixed waste focus area technical baseline report. Volume 1  

SciTech Connect

The Department of Energy (DOE) established the Mixed Waste Characterization, Treatment, and Disposal Focus Area (MWFA) to develop and facilitate implementation of technologies required to meet the Department`s commitments for treatment of mixed low-level and transuranic wastes. The mission of the MWFA is to provide acceptable technologies, developed in partnership with end-users, stakeholders, tribal governments, and regulators, that enable implementation of mixed waste treatment systems. To accomplish this mission, a technical baseline was established in 1996 that forms the basis for determining which technology development activities will be supported by the MWFA. This technical baseline is revised on an annual basis to reflect changes in the DOE Mixed Waste Management strategies, changes in the MWFA technical baseline development process, and MWFA accomplishments. This report presents the first revision to the technical baseline and the resulting prioritized list of deficiencies that the MWFA will address. This report also reflects a higher level of stakeholder involvement in the prioritization of the deficiencies. This document summarizes the data and the assumptions upon which this work was based, as well as information concerning the DOE Office of Environmental Management (EM) mixed waste technology development needs.

1997-04-01T23:59:59.000Z

227

Revised SRC-I project baseline. Volume 2  

Science Conference Proceedings (OSTI)

The SRC Process Area Design Baseline consists of six volumes. The first four were submitted to DOE on 9 September 1981. The fifth volume, summarizing the Category A Engineering Change Proposals (ECPs), was not submitted. The sixth volume, containing proprietary information on Kerr-McGee's Critical Solvent Deashing System, was forwarded to BRHG Synthetic Fuels, Inc. for custody, according to past instructions from DOE, and is available for perusal by authorized DOE representatives. DOE formally accepted the Design Baseline under ICRC Release ECP 4-1001, at the Project Configuration Control Board meeting in Oak Ridge, Tennessee on 5 November 1981. The documentation was then revised by Catalytic, Inc. to incorporate the Category B and C and Post-Baseline Engineering Change Proposals. Volumes I through V of the Revised Design Baseline, dated 22 October 1982, are nonproprietary and they were issued to the DOE via Engineering Change Notice (ECN) 4-1 on 23 February 1983. Volume VI again contains proprieary information on Kerr-McGee Critical Solvent Deashing System; it was issued to Burns and Roe Synthetic Fuels, Inc. Subsequently, updated process descriptions, utility summaries, and errata sheets were issued to the DOE and Burns and Roe Synthetic Fuels, Inc. on nonproprietary Engineering Change Notices 4-2 and 4-3 on 24 May 1983.

Not Available

1984-01-01T23:59:59.000Z

228

Lawrence Livermore National Laboratory Emergency Response Capability 2009 Baseline Needs Assessment Performance Assessment  

Science Conference Proceedings (OSTI)

This document was prepared by John A. Sharry, LLNL Fire Marshal and Division Leader for Fire Protection and was reviewed by Sandia/CA Fire Marshal, Martin Gresho. This document is the second of a two-part analysis of Emergency Response Capabilities of Lawrence Livermore National Laboratory. The first part, 2009 Baseline Needs Assessment Requirements Document established the minimum performance criteria necessary to meet mandatory requirements. This second part analyses the performance of Lawrence Livermore Laboratory Emergency Management Department to the contents of the Requirements Document. The document was prepared based on an extensive review of information contained in the 2004 BNA, a review of Emergency Planning Hazards Assessments, a review of building construction, occupancy, fire protection features, dispatch records, LLNL alarm system records, fire department training records, and fire department policies and procedures. On October 1, 2007, LLNL contracted with the Alameda County Fire Department to provide emergency response services. The level of service called for in that contract is the same level of service as was provided by the LLNL Fire Department prior to that date. This Compliance Assessment will evaluate fire department services beginning October 1, 2008 as provided by the Alameda County Fire Department.

Sharry, J A

2009-12-30T23:59:59.000Z

229

Baseline Gas Turbine Development Program second quaterly progress report  

DOE Green Energy (OSTI)

Progress is reported for a program to demonstrate by 1976 an experimental gas turbine powered automobile which meets the 1976 Federal Emissions standards and which is competitive in fuel economy, performance, reliability, and potential manufacturing cost with the conventional piston engine powered, standard size American automobile. Procurement delays have caused engine deliveries to slip one to two months. Assembly of Engine 3 with special instrumentation for NASA and Engine 4 to be used in the first vehicle has commenced. Resolution of some intake design details will complete the vehicle installation design. Other vehicle component and modification efforts are on schedule. Support activity has included: (1) studies and proposals for improving engine fuel economy; (2) ceramic recuperator calculations; (3) cooperation with NASA's program by giving a design review, providing engine drawings, planning and fabricating instrumentation for their engine, and advising them on matters relating to their engine test facilities; (4) refinement of a combustor test procedure; and (5) two ''sixth generation'' vehicle demonstrations. Engine endurance activity has started with the evaluation of a proprietary molded insulation. Limited progress was made in the experimental determination of variable geometry combustor control parameters. Ceramic regenerator specifications were prepared. A sub-contractor for an integrated control system was selected pending approval by the EPA Contract Officer. Design studies in support of the ''Gatorized'' turbine wheel contract are underway. Initial development tests on a rotary nozzle actuator are showing good progress towards achieving fast response times. A limited amount of development of the fuel control still remains before acceleration tests with and without a Free Rotor can be run.

Wagner, C.E.

1973-04-30T23:59:59.000Z

230

Seismic baseline and induction studies- Roosevelt Hot Springs, Utah and  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » Seismic baseline and induction studies- Roosevelt Hot Springs, Utah and Raft River, Idaho Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Report: Seismic baseline and induction studies- Roosevelt Hot Springs, Utah and Raft River, Idaho Details Activities (2) Areas (2) Regions (0) Abstract: Local seismic networks were established at the Roosevelt Hot Springs geothermal area, utah and at Raft River geothermal area, Idaho to monitor the background seismicity prior to initiation of geothermal power production. The Raft River study area is currently seismically quiet down

231

GENERAL TECHNICAL BASELINE QUALIFICATION STANDARD SUGGESTED STUDY REFERENCES  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Baseline Qualification Standard Suggested Study References Baseline Qualification Standard Suggested Study References 2007 revision This list provides suggested study references for the technical competencies of the General Technical Base Qualification Standard (DOE STD 1146-2007). More comprehensive resources are available through the DOE Online Learning Center's training courses and the study guides available through the Federal Technical Capability Panel web site. The Uniform Resource Locaters for these sites are listed in the Standard. This list is arranged by Technical Competency, followed by the suggested reference source. Some competencies deal directly with DOE or Federal directives, and they are also the reference. In a few cases, the Study Guide is the only concise source, and appropriate sections are listed.

232

Hybrid Electric Vehicle Fleet and Baseline Performance Testing  

NLE Websites -- All DOE Office Websites (Extended Search)

Vehicle Fleet and Vehicle Fleet and Baseline Performance Testing James Francfort Idaho National Laboratory 2 Paper #2006-01-1267 Presentation Outline Background & goals Testing partners Baseline performance testing new HEVs Fleet testing (160k miles in 36 months) End-of-life testing (fuel economy & battery testing at 160k miles) WWW information location 3 Paper #2006-01-1267 Background Advanced Vehicle Testing Activity (AVTA) - part of DOE's FreedomCAR and Vehicle Technologies Program Goal - provide benchmark data for technology modeling, and research and development programs Idaho National Laboratory manages these activities, and performs data analysis and reporting activities 4 Paper #2006-01-1267 Testing Partners Qualified Vehicle Testers hElectric Transportation Applications (lead)

233

Water Waves and Integrability  

E-Print Network (OSTI)

The Euler's equations describe the motion of inviscid fluid. In the case of shallow water, when a perturbative asymtotic expansion of the Euler's equations is taken (to a certain order of smallness of the scale parameters), relations to certain integrable equations emerge. Some recent results concerning the use of integrable equation in modeling the motion of shallow water waves are reviewed in this contribution.

Rossen I. Ivanov

2007-07-12T23:59:59.000Z

234

Tools for NEPA compliance: Baseline reports and compliance guides  

Science Conference Proceedings (OSTI)

Environmental baseline documents and NEPA compliance guides should be carried in every NEPA implementation ``tool kit``. These two indispensable tools can play a major role in avoiding repeated violations of NEPA requirements that have occurred over the past 26 years. This paper describes these tools, discusses their contents, and explains how they are used to prepare better NEPA documents more cost-effectively. Focus is on experience at Sandia Laboratories (NM).

Wolff, T.A. [Sandia National Labs., Albuquerque, NM (United States); Hansen, R.P. [Hansen Environmental Consultants, Englewood, CO (United States)

1994-12-31T23:59:59.000Z

235

Imperial Valley environmental project: baseline air quality and meteorological data  

DOE Green Energy (OSTI)

The baseline air quality and meteorological data are gathered by the Imperial Valley Environmental Project from December 1976 through April 1978. The air quality data obtained at the six fixed locations are reported in the form of histograms; histograms and wind roses are presented of the meteorological data collected at the six sites. The air quality and meteorological data obtained by the mobile laboratory in the vicinity of the Heber KGRA are listed in a similar format. (MHR)

Gudiksen, P.H.; Lamson, K.C.; Axelrod, M.C.; Fowler, V.; Nyholm, R.A.

1979-09-26T23:59:59.000Z

236

Baseline descriptions for LWR spent fuel storage, handling, and transportation  

SciTech Connect

Baseline descriptions for the storage, handling, and transportation of reactor spent fuel are provided. The storage modes described include light water reactor (LWR) pools, away-from-reactor basins, dry surface storage, reprocessing-facility interim storage pools, and deep geologic storage. Land and water transportation are also discussed. This work was sponsored by the Department of Energy/Office of Safeguards and Security as part of the Sandia Laboratories Fixed Facility Physical Protection Program. 45 figs, 4 tables.

Moyer, J.W.; Sonnier, C.S.

1978-04-01T23:59:59.000Z

237

Baseline Gas Turbine Development Program. Fourteenth quarterly progress report  

DOE Green Energy (OSTI)

Progress is reported for a Baseline Gas Turbine Development Program sponsored by the Heat Engine Systems Branch, Division of Transportation Energy Conservation (TEC) of the Energy Research and Development Administration (ERDA). Structurally, this program is made up of three parts: (1) documentation of the existing automotive gas turbine state-of-the-art; (2) conduction of an extensive component improvement program; and (3) utilization of the improvements in the design, and building of an Upgraded Engine capable of demonstrating program goals.

Schmidt, F W; Wagner, C E

1976-04-30T23:59:59.000Z

238

Baseline information development for energy smart schools -- applied research, field testing and technology integration  

E-Print Network (OSTI)

et al. 2002) on school energy usage. Some of these studiesschool buildings and their energy usage from three states:NYSERDA, there is no K-12 energy usage information from New

Xu, Tengfang; Piette, Mary Ann

2004-01-01T23:59:59.000Z

239

Baseline information development for energy smart schools -- applied research, field testing and technology integration  

E-Print Network (OSTI)

electricity and natural gas usage, and sum of these basedaggregated electricity and/or gas usages for the buildinggas, other fuels), building areas served, equipment types and usage

Xu, Tengfang; Piette, Mary Ann

2004-01-01T23:59:59.000Z

240

Baseline information development for energy smart schools -- applied research, field testing and technology integration  

E-Print Network (OSTI)

swimm ing pools and climate zones. Th e major findings aresound statements. The way the climate zones are divided waswhich aggregated CEC 16 climate zones into four regions by

Xu, Tengfang; Piette, Mary Ann

2004-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "integrated baseline review" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Baseline information development for energy smart schools -- applied research, field testing and technology integration  

E-Print Network (OSTI)

the Energy Center of Wisconsin (ECW) manages DaylightingFlorida, New York, and Wisconsin. The goal of this dataFlorida, New York, and Wisconsin. Throughout the project,

Xu, Tengfang; Piette, Mary Ann

2004-01-01T23:59:59.000Z

242

Baseline information development for energy smart schools -- applied research, field testing and technology integration  

E-Print Network (OSTI)

and Southern California Edison company surveys (CEUS - SCEPGE), Southern California Edison (SCE), and San Diego Gas &and Southern California Edison surveys (199 2, 1995) WI:

Xu, Tengfang; Piette, Mary Ann

2004-01-01T23:59:59.000Z

243

Baseline information development for energy smart schools -- applied research, field testing and technology integration  

E-Print Network (OSTI)

daylighting Other key parameters and information that would be available to investigate overall energy uses, building and systems

Xu, Tengfang; Piette, Mary Ann

2004-01-01T23:59:59.000Z

244

David Grant Medical Center energy use baseline and integrated resource assessment  

SciTech Connect

The US Air Mobility Command (AMC) has tasked Pacific Northwest Laboratory (PNL) with supporting the US Department of Energy (DOE) Federal Energy Management Program's (FEMP) mission to identify, evaluate, and assist in acquiring all cost-effective energy resource opportunities (EROs) at the David Grant Medical Center (DGMC). This report describes the methodology used to identify and evaluate the EROs at DGMC, provides a life-cycle cost (LCC) analysis for each ERO, and prioritizes any life-cycle cost-effective EROs based on their net present value (NPV), value index (VI), and savings to investment ratio (SIR or ROI). Analysis results are presented for 17 EROs that involve energy use in the areas of lighting, fan and pump motors, boiler operation, infiltration, electric load peak reduction and cogeneration, electric rate structures, and natural gas supply. Typical current energy consumption is approximately 22,900 MWh of electricity (78,300 MBtu), 87,600 kcf of natural gas (90,300 MBtu), and 8,300 gal of fuel oil (1,200 MBtu). A summary of the savings potential by energy-use category of all independent cost-effective EROs is shown in a table. This table includes the first cost, yearly energy consumption savings, and NPV for each energy-use category. The net dollar savings and NPV values as derived by the life-cycle cost analysis are based on the 1992 federal discount rate of 4.6%. The implementation of all EROs could result in a yearly electricity savings of more than 6,000 MWh or 26% of current yearly electricity consumption. More than 15 MW of billable load (total billed by the utility for a 12-month period) or more than 34% of current billed demand could also be saved. Corresponding natural gas savings would be 1,050 kcf (just over 1% of current consumption). Total yearly net energy cost savings for all options would be greater than $343,340. This value does not include any operations and maintenance (O M) savings.

Richman, E.E.; Hoshide, R.K.; Dittmer, A.L.

1993-04-01T23:59:59.000Z

245

David Grant Medical Center energy use baseline and integrated resource assessment  

SciTech Connect

The US Air Mobility Command (AMC) has tasked Pacific Northwest Laboratory (PNL) with supporting the US Department of Energy (DOE) Federal Energy Management Program`s (FEMP) mission to identify, evaluate, and assist in acquiring all cost-effective energy resource opportunities (EROs) at the David Grant Medical Center (DGMC). This report describes the methodology used to identify and evaluate the EROs at DGMC, provides a life-cycle cost (LCC) analysis for each ERO, and prioritizes any life-cycle cost-effective EROs based on their net present value (NPV), value index (VI), and savings to investment ratio (SIR or ROI). Analysis results are presented for 17 EROs that involve energy use in the areas of lighting, fan and pump motors, boiler operation, infiltration, electric load peak reduction and cogeneration, electric rate structures, and natural gas supply. Typical current energy consumption is approximately 22,900 MWh of electricity (78,300 MBtu), 87,600 kcf of natural gas (90,300 MBtu), and 8,300 gal of fuel oil (1,200 MBtu). A summary of the savings potential by energy-use category of all independent cost-effective EROs is shown in a table. This table includes the first cost, yearly energy consumption savings, and NPV for each energy-use category. The net dollar savings and NPV values as derived by the life-cycle cost analysis are based on the 1992 federal discount rate of 4.6%. The implementation of all EROs could result in a yearly electricity savings of more than 6,000 MWh or 26% of current yearly electricity consumption. More than 15 MW of billable load (total billed by the utility for a 12-month period) or more than 34% of current billed demand could also be saved. Corresponding natural gas savings would be 1,050 kcf (just over 1% of current consumption). Total yearly net energy cost savings for all options would be greater than $343,340. This value does not include any operations and maintenance (O&M) savings.

Richman, E.E.; Hoshide, R.K.; Dittmer, A.L.

1993-04-01T23:59:59.000Z

246

Hybrid Electric Vehicle Fleet and Baseline Performance Testing  

Science Conference Proceedings (OSTI)

The U.S. Department of Energys Advanced Vehicle Testing Activity (AVTA) conducts baseline performance and fleet testing of hybrid electric vehicles (HEV). To date, the AVTA has completed baseline performance testing on seven HEV models and accumulated 1.4 million fleet testing miles on 26 HEVs. The HEV models tested or in testing include: Toyota Gen I and Gen II Prius, and Highlander; Honda Insight, Civic and Accord; Chevrolet Silverado; Ford Escape; and Lexus RX 400h. The baseline performance testing includes dynamometer and closed track testing to document the HEVs fuel economy (SAE J1634) and performance in a controlled environment. During fleet testing, two of each HEV model are driven to 160,000 miles per vehicle within 36 months, during which maintenance and repair events, and fuel use is recorded and used to compile life-cycle costs. At the conclusion of the 160,000 miles of fleet testing, the SAE J1634 tests are rerun and each HEV battery pack is tested. These AVTA testing activities are conducted by the Idaho National Laboratory, Electric Transportation Applications, and Exponent Failure Analysis Associates. This paper discusses the testing methods and results.

J. Francfort; D. Karner

2006-04-01T23:59:59.000Z

247

Development of Baseline Monthly Utility Models for Fort Hood, Texas  

E-Print Network (OSTI)

The Fort Hood Army base in central Texas has more than 5,200 buildings and can be considered as typical of large Department of Defense Army bases in the continental United States. The annual utility bill of the base exceeds $25 million. Baseline monthly models for electricity use, electricity demand, gas use, and water use for the three cantonment areas of Fort Hood have been developed. Such models can be used as screening tools for detecting changes in future utility bills and also to track/evaluate the extent to which Presidential Executive Order 12902, mandating 30% decrease in energy utility bills from 1985 to 2005, is being met. In this analysis, 1990 has been selected as the baseline year to illustrate the predictive capability of the models. Since ascertaining the uncertainty of our predictions is very important for meaningful evaluations, we have also presented the relevant equations for computing the 95% prediction intervals of the regression models and illustrated their use with measured data over the period of 1989-1993. This study also evaluated two different types of energy modeling software- the Princeton Scorekeeping method (PRISM) and EModel- in order to ascertain which is more appropriate for baseline modeling of large Army installations such as Fort Hood. It was found that the EModel software, which has more flexibility to handle different types of linear single variate change point models, gave more accurate modeling results.

Reddy, T. A.; Saman, N. F.; Claridge, D. E.; Haberl, J. S.; Turner, W. D.; Chalifoux, A.

1996-04-01T23:59:59.000Z

248

Development of Baseline Monthly Utility Models for Fort Hood, Texas  

E-Print Network (OSTI)

The Fort Hood Army base in central Texas has more than 5,200 buildings and can be considered as typical of large Department of Defense Army bases in the continental United States. The annual utility bill of the base exceeds $25 million. Baseline monthly models for electricity use, electricity demand, gas use, and water use for the three cantonment areas of Fort Hood have been developed. Such models can be used as screening tools for detecting changes in future utility bills and also to track/evaluate the extent to which Presidential Executive Order 12902, mandating 30% decrease in energy utility bills from 1985 to 2005, is being met. In this analysis, 1990 has been selected as the baseline year to illustrate the predictive capability of the models. Since ascertaining the uncertainty of our predictions is very important for meaningful evaluations, we have also presented the relevant equations for computing the 95% prediction intervals of the regression models and illustrated their use with measured data over the period 1989 - 1993. This study also evaluated two different types of energy modeling software- the Princeton Scorekeeping method (PRISM) and EModel- in order to ascertain which is more appropriate for baseline modeling of large Army installations such as Fort Hood. It was found that the EModel software, which has more flexibility to handle different types of linear single variate change point models, gave more accurate modeling results.

Reddy, T. A.; Saman, N. F.; Claridge, D. E.; Haberl, J. S.; Turner, W. D.; Chalifoux, A.

1996-01-01T23:59:59.000Z

249

Investigation of Long Baseline Neutrino Oscillations from Experiments at KAON  

E-Print Network (OSTI)

The proposed KAON factory at the Triumf Laboratory in Vancouver, Canada provides a unique opportunity for high statistics long baseline neutrino oscillation experiments. Several possibilities are under active consideration. In this paper we describe the theoretical expectations for a {\\it very} long baseline experiment in which the neutrinos are directed towards, and detected at the Superkamiokande detector in Kamioka, Japan 7200 km away. We find that in the first year this experiment would probe oscillations down to about $\\Delta m^2_0 = 9 \\times 10^{-5} eV^2$ for maximal mixing, and if $\\Delta m^2_0 \\geq 5 \\times 10^{-4} eV^2$ it would be sensitive to $sin^2(2 \\theta_0) \\geq 0.2$. These results are compared with a more modest proposal of a 100 km baseline with a 6300 tonne detector which would probe $\\Delta m^2_0 \\geq 1.3 \\times 10^{-3} eV^2$ for maximal mixing, and if $\\Delta m^2_0 \\geq 0.02 eV^2$ it would be sensitive to $sin^2(2 \\theta_0) \\geq 0.01$. These experiments would either confirm or rule out the entire range of parameters allowed by Kamiokande and IMB to explain the deficit in the ratio of $\

Scott Hayward; Martin Sevior; Nathan Weiss; Dennis Wright

1993-08-12T23:59:59.000Z

250

Comprehensive baseline environmental audit of former underground test areas in Colorado, Nevada, and New Mexico  

SciTech Connect

This report documents the results of the Comprehensive Baseline Environmental Audit of Former Underground Test Areas (FUTAS) in the States of Colorado, Nevada, and New Mexico. DOE and contractor systems for management of environmental protection activities on the Nevada Test Site (NTS) were not within the scope of the audit. The audit was conducted May 16-May 26, 1994, by the Office of Environmental Audit (EH-24). DOE 5482.1 B, {open_quotes}Environment, Safety, and Health Appraisal Program{close_quotes}, establishes the mission of EH-24, which is to provide comprehensive, independent oversight of Department-wide environmental programs on behalf of the Secretary of Energy. The ultimate goal of EH-24 is to enhance environmental protection and minimize risk to public health and the environment. EH-24 accomplishes its mission using systematic and periodic evaluations of DOE`s environmental programs within line organizations and supplemental activities that strengthen self-assessment and oversight functions within program, field, and contractor organizations. These evaluations function as a vehicle through which the Secretary and program managers are apprised of the status and vulnerabilities of Departmental environmental activities and environmental management systems. Several types of evaluations are conducted, including: (1) comprehensive baseline environmental audits; (2) routine environmental audits; (3) environmental management assessments; and (4) special issue reviews.

1994-05-01T23:59:59.000Z

251

Geothermal environmental studies, Heber Region, Imperial Valley, California. Environmental baseline data acquisition. Final report  

DOE Green Energy (OSTI)

The Electric Power Research Institute (EPRI) has been studying the feasibility of a Low Salinity Hydrothermal Demonstration Plant as part of its Geothermal Energy Program. The Heber area of the Imperial Valley was selected as one of the candidate geothermal reservoirs. Documentation of the environmental conditions presently existing in the Heber area is required for assessment of environmental impacts of future development. An environmental baseline data acquisition program to compile available data on the environment of the Heber area is reported. The program included a review of pertinent existing literature, interviews with academic, governmental and private entities, combined with field investigations and meteorological monitoring to collect primary data. Results of the data acquisition program are compiled in terms of three elements: the physical, the biological and socioeconomic settings.

Not Available

1977-02-01T23:59:59.000Z

252

SCFA lead lab technical assistance at Lawrence Berkeley National Laboratory: Baseline review of three groundwater plumes  

SciTech Connect

During the closeout session, members of the technical assistance team conveyed to the site how impressed they were at the thoroughness of the site's investigation and attempts at remediation. Team members were uniformly pleased at the skilled detection work to identify sources, make quick remediation decisions, and change course when a strategy did not work well. The technical assistance team also noted that, to their knowledge, this is the only DOE site at which a world-class scientist has had primary responsibility for the environmental restoration activities. This has undoubtedly contributed to the successes observed and DOE should take careful note. The following overall recommendations were agreed upon: (1) The site has done a phenomenal job of characterization and identifying and removing source terms. (2) Technologies selected to date are appropriate and high impact, e.g. collection trenches are an effective remedial strategy for this complicated geology. The site should continue using technology that is adapted to the site's unique geology, such as the collection trenches. (3) The site should develop a better way to determine the basis of cleanup for all sites. (4) The sentinel well system should be evaluated and modified, if needed, to assure that the sentinel wells provide coverage to the current site boundary. Potential modifications could include installation, abandonment or relocation of wells based on the large amount of data collected since the original sentinel well system was designed. (5) Modeling to assist in remedial design and communication should continue. (6) The site should develop a plan to ensure institutional memory. (7) The most likely possibility for improving closure to 2006 is by removing the residual source of the Old Town plume and establishing the efficacy of remediation for the 51/64 plume.

Hazen, Terry; et al.

2002-09-26T23:59:59.000Z

253

SCFA lead lab technical assistance at Lawrence Berkeley National Laboratory: Baseline review of three groundwater plumes  

E-Print Network (OSTI)

in Groundwater at the Pantex Plant. Susskind, H. , 1972. Anthe Ogallala Aquifer at the Pantex Plant, Texas. Departmentwritten to support the DOE Pantex Plant in Amarillo, Texas,

Hazen, Terry

2002-01-01T23:59:59.000Z

254

Meter-baseline tests of sterile neutrinos at Daya Bay  

E-Print Network (OSTI)

We explore the sensitivity of an experiment at the Daya Bay site, with a point radioactive source and a few meter baseline, to neutrino oscillations involving one or more eV mass sterile neutrinos. We find that within a year, the entire 3+2 and 1+3+1 parameter space preferred by global fits can be excluded at the 3\\sigma level, and if an oscillation signal is found, the 3+1 and 3+2 scenarios can be distinguished from each other at more than the 3\\sigma level provided one of the sterile neutrinos is lighter than 0.5 eV.

Y. Gao; D. Marfatia

2013-02-22T23:59:59.000Z

255

PARS II Process Document OVERTARGET BASELINE (OTB) REPORTING...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Contractor should validate accuracy of the data in each identified field by reviewing EVCPRHEADER table of the PARS II Upload Template file. * OTBOTS Date: Date when OTBOTS...

256

Lawrence Livermore National Laboratory Emergency Response Capability Baseline Needs Assessment Requirement Document  

SciTech Connect

This revision of the LLNL Fire Protection Baseline Needs Assessment (BNA) was prepared by John A. Sharry, LLNL Fire Marshal and LLNL Division Leader for Fire Protection and reviewed by Martin Gresho, Sandia/CA Fire Marshal. The document follows and expands upon the format and contents of the DOE Model Fire Protection Baseline Capabilities Assessment document contained on the DOE Fire Protection Web Site, but only address emergency response. The original LLNL BNA was created on April 23, 1997 as a means of collecting all requirements concerning emergency response capabilities at LLNL (including response to emergencies at Sandia/CA) into one BNA document. The original BNA documented the basis for emergency response, emergency personnel staffing, and emergency response equipment over the years. The BNA has been updated and reissued five times since in 1998, 1999, 2000, 2002, and 2004. A significant format change was performed in the 2004 update of the BNA in that it was 'zero based.' Starting with the requirement documents, the 2004 BNA evaluated the requirements, and determined minimum needs without regard to previous evaluations. This 2010 update maintains the same basic format and requirements as the 2004 BNA. In this 2010 BNA, as in the previous BNA, the document has been intentionally divided into two separate documents - the needs assessment (1) and the compliance assessment (2). The needs assessment will be referred to as the BNA and the compliance assessment will be referred to as the BNA Compliance Assessment. The primary driver for separation is that the needs assessment identifies the detailed applicable regulations (primarily NFPA Standards) for emergency response capabilities based on the hazards present at LLNL and Sandia/CA and the geographical location of the facilities. The needs assessment also identifies areas where the modification of the requirements in the applicable NFPA standards is appropriate, due to the improved fire protection provided, the remote location and low population density of some the facilities. As such, the needs assessment contains equivalencies to the applicable requirements. The compliance assessment contains no such equivalencies and simply assesses the existing emergency response resources to the requirements of the BNA and can be updated as compliance changes independent of the BNA update schedule. There are numerous NFPA codes and standards and other requirements and guidance documents that address the subject of emergency response. These requirements documents are not always well coordinated and may contain duplicative or conflicting requirements or even coverage gaps. Left unaddressed, this regulatory situation results in frequent interpretation of requirements documents. Different interpretations can then lead to inconsistent implementation. This BNA addresses this situation by compiling applicable requirements from all identified sources (see Section 5) and analyzing them collectively to address conflict and overlap as applicable to the hazards presented by the LLNL and Sandia/CA sites (see Section 7). The BNA also generates requirements when needed to fill any identified gaps in regulatory coverage. Finally, the BNA produces a customized simple set of requirements, appropriate for the DOE protection goals, such as those defined in DOE O 420.1B, the hazard level, the population density, the topography, and the site layout at LLNL and Sandia/CA that will be used as the baseline requirements set - the 'baseline needs' - for emergency response at LLNL and Sandia/CA. A template approach is utilized to accomplish this evaluation for each of the nine topical areas that comprise the baseline needs for emergency response. The basis for conclusions reached in determining the baseline needs for each of the topical areas is presented in Sections 7.1 through 7.9. This BNA identifies only mandatory requirements and establishes the minimum performance criteria. The minimum performance criteria may not be the level of performance desired Lawrence Livermore National Laboratory or Sandia/CA

Sharry, J A

2009-12-30T23:59:59.000Z

257

Light Sterile Neutrinos and Short Baseline Neutrino Oscillation Anomalies  

E-Print Network (OSTI)

We study two possible explanations for short baseline neutrino oscillation anomalies, such as the LSND and MiniBooNE anti-neutrino data, and for the reactor anomaly. The first scenario is the mini-seesaw mechanism with two eV-scale sterile neutrinos. We present both analytic formulas and numerical results showing that this scenario could account for the short baseline and reactor anomalies and is consistent with the observed masses and mixings of the three active neutrinos. We also show that this scenario could arise naturally from an effective theory containing a TeV-scale VEV, which could be related to other TeV-scale physics. The minimal version of the mini-seesaw relates the active-sterile mixings to five real parameters and favors an inverted hierarchy. It has the interesting property that the effective Majorana mass for neutrinoless double beta decay vanishes, while the effective masses relevant to tritium beta decay and to cosmology are respectively around 0.2 and 2.4 eV. The second scenario contains o...

Fan, JiJi

2012-01-01T23:59:59.000Z

258

Light Sterile Neutrinos and Short Baseline Neutrino Oscillation Anomalies  

E-Print Network (OSTI)

We study two possible explanations for short baseline neutrino oscillation anomalies, such as the LSND and MiniBooNE anti-neutrino data, and for the reactor anomaly. The first scenario is the mini-seesaw mechanism with two eV-scale sterile neutrinos. We present both analytic formulas and numerical results showing that this scenario could account for the short baseline and reactor anomalies and is consistent with the observed masses and mixings of the three active neutrinos. We also show that this scenario could arise naturally from an effective theory containing a TeV-scale VEV, which could be related to other TeV-scale physics. The minimal version of the mini-seesaw relates the active-sterile mixings to five real parameters and favors an inverted hierarchy. It has the interesting property that the effective Majorana mass for neutrinoless double beta decay vanishes, while the effective masses relevant to tritium beta decay and to cosmology are respectively around 0.2 and 2.4 eV. The second scenario contains only one eV-scale sterile neutrino but with an effective non-unitary mixing matrix between the light sterile and active neutrinos. We find that though this may explain the anomalies, if the non-unitarity originates from a heavy sterile neutrino with a large (fine-tuned) mixing angle, this scenario is highly constrained by cosmological and laboratory observations.

JiJi Fan; Paul Langacker

2012-01-31T23:59:59.000Z

259

Moving baseline for evaluation of advanced coal-extraction systems  

SciTech Connect

This document reports results from the initial effort to establish baseline economic performance comparators for a program whose intent is to define, develop, and demonstrate advanced systems suitable for coal resource extraction beyond the year 2000. Systems used in this study were selected from contemporary coal mining technology and from conservative conjectures of year 2000 technology. The analysis was also based on a seam thickness of 6 ft. Therefore, the results are specific to the study systems and the selected seam thickness. To be more beneficial to the program, the effort should be extended to other seam thicknesses. This document is one of a series which describe systems level requirements for advanced underground coal mining equipment. Five areas of performance are discussed: production cost, miner safety, miner health, environmental impact, and recovery efficiency. The projections for cost and production capability comprise a so-called moving baseline which will be used to assess compliance with the systems requirement for production cost. Separate projections were prepared for room and pillar, longwall, and shortwall technology all operating under comparable sets of mining conditions. This work is part of an effort to define and develop innovative coal extraction systems suitable for the significant resources remaining in the year 2000.

Bickerton, C.R.; Westerfield, M.D.

1981-04-15T23:59:59.000Z

260

Baseline Glass Development for Combined Fission Products Waste Streams  

SciTech Connect

Borosilicate glass was selected as the baseline technology for immobilization of the Cs/Sr/Ba/Rb (Cs), lanthanide (Ln) and transition metal fission product (TM) waste steams as part of a cost benefit analysis study.[1] Vitrification of the combined waste streams have several advantages, minimization of the number of waste forms, a proven technology, and similarity to waste forms currently accepted for repository disposal. A joint study was undertaken by Pacific Northwest National Laboratory (PNNL) and Savannah River National Laboratory (SRNL) to develop acceptable glasses for the combined Cs + Ln + TM waste streams (Option 1) and Cs + Ln combined waste streams (Option 2) generated by the AFCI UREX+ set of processes. This study is aimed to develop baseline glasses for both combined waste stream options and identify key waste components and their impact on waste loading. The elemental compositions of the four-corners study were used along with the available separations data to determine the effect of burnup, decay, and separations variability on estimated waste stream compositions.[2-5] Two different components/scenarios were identified that could limit waste loading of the combined Cs + LN + TM waste streams, where as the combined Cs + LN waste stream has no single component that is perceived to limit waste loading. Combined Cs + LN waste stream in a glass waste form will most likely be limited by heat due to the high activity of Cs and Sr isotopes.

Crum, Jarrod V.; Billings, Amanda Y.; Lang, Jesse B.; Marra, James C.; Rodriguez, Carmen P.; Ryan, Joseph V.; Vienna, John D.

2009-06-29T23:59:59.000Z

Note: This page contains sample records for the topic "integrated baseline review" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Reviews and Validations | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Reviews and Reviews and Validations Reviews and Validations External Independent Review (EIR) Procedures Under DOE O 413.3B, Program and Project Management for the Acquisition of Capital Assets, the Office of Acquisition and Project Management (OAPM) must perform a Performance Baseline External Independent Review (EIR) prior to Critical Decision (CD) 2, and a Construction/Execution Readiness EIR for all Major System projects prior to CD-3. The EIR Standard Operating Procedures (SOP) discuss all elements of EIRs including review scope, review process, Corrective Action Plans, and OAPM's Performance Baseline Validation Process. The intent of the SOP is to make clear the OAPM expectations for both the CD-2 and CD-3 EIR, and thereby facilitate the project planning process. In particular, OAPM expects that the Scope of

262

Effects of Baseline Conditions on the Simulated Hydrologic Response to Projected Climate Change  

Science Conference Proceedings (OSTI)

Changes in temperature and precipitation projected from five general circulation models, using one late-twentieth-century and three twenty-first-century emission scenarios, were downscaled to three different baseline conditions. Baseline ...

Kathryn M. Koczot; Steven L. Markstrom; Lauren E. Hay

2011-10-01T23:59:59.000Z

263

Estimating Demand Response Load Impacts: Evaluation of Baseline Load Models for Non-  

E-Print Network (OSTI)

, and the Office of Electricity Delivery and Energy Reliability, Permitting, Siting and Analysis of the ULBNL-63728 Estimating Demand Response Load Impacts: Evaluation of Baseline Load Models for Non .............................................................................................................. 9 4. Baseline Profile (BLP) Models

264

NREL: MIDC/SRRL Baseline Measurement System (39.74 N, 105.18...  

NLE Websites -- All DOE Office Websites (Extended Search)

The Measurement and Instrumentation Data Center collects Irradiance and Meterological data from the Solar Radiation Research Laboratory Baseline Measurement System....

265

Sandia National Laboratories, California proposed CREATE facility environmental baseline survey.  

SciTech Connect

Sandia National Laboratories, Environmental Programs completed an environmental baseline survey (EBS) of 12.6 acres located at Sandia National Laboratories/California (SNL/CA) in support of the proposed Collaboration in Research and Engineering for Advanced Technology and Education (CREATE) Facility. The survey area is comprised of several parcels of land within SNL/CA, County of Alameda, California. The survey area is located within T 3S, R 2E, Section 13. The purpose of this EBS is to document the nature, magnitude, and extent of any environmental contamination of the property; identify potential environmental contamination liabilities associated with the property; develop sufficient information to assess the health and safety risks; and ensure adequate protection for human health and the environment related to a specific property.

Catechis, Christopher Spyros

2013-10-01T23:59:59.000Z

266

GRI baseline projection: Regional energy summary, 1991 edition. Topical report  

SciTech Connect

Results of the 1991 Edition of the GRI Baseline Projection for each of the eleven regions used in the Gas Research Institute (GRI) version of the DRI energy model are summarized. The 1991 edition of the projection is an internally consistent forecast of United States energy markets produced using results from GRI's Hydrocarbon Model in conjunction with the DRI Macroeconomic Model and the GRI/DRI Energy Model. The report discusses only those energy market concepts which are forecast on a regional basis in the Energy Model. Unless otherwise noted, all prices are reported in 1990 constant dollars. Transportation energy demand is not treated on a regional basis in the GRI/DRI Energy Model. For the purposes of the report, transportation energy demand was shared out to each region based on population.

Blanford, K.M.; McDonald, S.C.

1991-01-01T23:59:59.000Z

267

Impact of selected energy conservation technologies on baseline demands  

SciTech Connect

This study is an application of the modeling and demand projection capability existing at Brookhaven National Laboratory to specific options in energy conservation. Baseline energy demands are modified by introducing successively three sets of conservation options. The implementation of improved building standards and the use of co-generation in industry are analyzed in detail and constitute the body of this report. Two further sets of energy demands are presented that complete the view of a low energy use, ''conservation'' scenario. An introduction to the report covers the complexities in evaluating ''conservation'' in view of the ways it is inextricably linked to technology, prices, policy, and the mix of output in the economy. The term as used in this report is narrowly defined, and methodologies are suggested by which these other aspects listed can be studied in the future.

Doernberg, A

1977-09-01T23:59:59.000Z

268

LTC American`s, Inc. vacuum blasting machine: Baseline report  

Science Conference Proceedings (OSTI)

The LTC shot blast technology was tested and is being evaluated at Florida International University (FIU) as a baseline technology. In conjunction with FIU`s evaluation of efficiency and cost, this report covers the evaluation conducted for safety and health issues. It is a commercially available technology and has been used for various projects at locations throughout the country. The LTC 1073 Vacuum Blasting Machine uses a high-capacity, direct-pressure blasting system which incorporates a continuous feed for the blast media. The blast media cleans the surface within the contained brush area of the blast. It incorporates a vacuum system which removes dust and debris from the surface as it is blasted. The safety and health evaluation during the testing focused on two main areas of exposure: dust and noise.

NONE

1997-07-31T23:59:59.000Z

269

Direct coal liquefaction baseline design and system analysis  

Science Conference Proceedings (OSTI)

The primary objective of the study is to develop a computer model for a base line direct coal liquefaction design based on two stage direct coupled catalytic reactors. This primary objective is to be accomplished by completing the following: a base line design based on previous DOE/PETC results from Wilsonville pilot plant and other engineering evaluations; a cost estimate and economic analysis; a computer model incorporating the above two steps over a wide range of capacities and selected process alternatives; a comprehensive training program for DOE/PETC Staff to understand and use the computer model; a thorough documentation of all underlying assumptions for baseline economics; and a user manual and training material which will facilitate updating of the model in the future.

Not Available

1991-04-01T23:59:59.000Z

270

Eastern Wind Integration and Transmission Study -- Preliminary Findings: Preprint  

Science Conference Proceedings (OSTI)

This paper reviews the Eastern Wind Integration and Transmission Study, the development of wind datasets, the transmission analysis, and the results of wind integration analysis for four scenarios.

Corbus, D.; Milligan, M.; Ela, E.; Schuerger, M.; Zavadil, B.

2009-09-01T23:59:59.000Z

271

Comprehensive Baseline Environmental Audit of the Inhalation Toxicology Research Institute, Albuquerque, New Mexico  

SciTech Connect

This report documents the results of the Comprehensive Baseline Environmental Audit conducted at the Inhalation Toxicology Research Institute (ITRI) in Albuquerque, New Mexico. The scope of the audit at the ITRI was comprehensive, addressing environmental activities in the technical areas of air; soils, sediments, and biota; surface water/drinking water; groundwater; waste management; toxic and chemical materials; quality assurance; radiation; inactive waste sites; environmental management; and environmental monitoring programs. Specifically assessed was the compliance of ITRI operations and activities with Federal, state, and local regulations; DOE Orders; internal operating standards; and best management practices. Onsite activities included inspection of ITRI facilities and operations; review of site documents; interviews with DOE and contractor personnel, as well as representatives from state regulatory agencies; and reviews of previous appraisals. Using these sources of information, the environmental audit team developed findings, which fell into two general categories: compliance findings and best management practice findings. Each finding also identifies apparent causal factor(s) that contributed to the finding and will assist line management in developing ``root causes`` for implementing corrective actions.

1993-06-01T23:59:59.000Z

272

The Hanford Site New Production Reactor (NPR) economic and demographic baseline forecasts  

SciTech Connect

The objective of this is to present baseline employment and population forecasts for Benton, Franklin, and Yakima Counties. These forecasts will be used in the socioeconomic analysis portion of the New Production Reactor Environmental Impact Statement. Aggregate population figures for the three counties in the study area were developed for high- and low-growth scenarios for the study period 1990 through 2040. Age-sex distributions for the three counties during the study period are also presented. The high and low scenarios were developed using high and low employment projections for the Hanford site. Hanford site employment figures were used as input for the HARC-REMI Economic and Demographic (HED) model to produced baseline employment forecasts for the three counties. These results, in turn, provided input to an integrated three-county demographic model. This model, a fairly standard cohort-component model, formalizes the relationship between employment and migration by using migration to equilibrate differences in labor supply and demand. In the resulting population estimates, age-sex distributions for 1981 show the relatively large work force age groups in Benton County while Yakima County reflects higher proportions of the population in the retirement ages. The 2040 forecasts for all three counties reflect the age effects of relatively constant and low fertility increased longevity, as well as the cumulative effects of the migration assumptions in the model. By 2040 the baby boom population will be 75 years and older, contributing to the higher proportion of population in the upper end age group. The low scenario age composition effects are similar. 13 refs., 5 figs., 9 tabs.

Cluett, C.; Clark, D.C. (Battelle Human Affairs Research Center, Seattle, WA (USA)); Pittenger, D.B. (Demographics Lab., Olympia, WA (USA))

1990-08-01T23:59:59.000Z

273

Reference manual for toxicity and exposure assessment and risk characterization. CERCLA Baseline Risk Assessment  

SciTech Connect

The Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA, 1980) (CERCLA or Superfund) was enacted to provide a program for identifying and responding to releases of hazardous substances into the environment. The Superfund Amendments and Reauthorization Act (SARA, 1986) was enacted to strengthen CERCLA by requiring that site clean-ups be permanent, and that they use treatments that significantly reduce the volume, toxicity, or mobility of hazardous pollutants. The National Oil and Hazardous Substances Pollution Contingency Plan (NCP) (USEPA, 1985; USEPA, 1990) implements the CERCLA statute, presenting a process for (1) identifying and prioritizing sites requiring remediation and (2) assessing the extent of remedial action required at each site. The process includes performing two studies: a Remedial Investigation (RI) to evaluate the nature, extent, and expected consequences of site contamination, and a Feasibility Study (FS) to select an appropriate remedial alternative adequate to reduce such risks to acceptable levels. An integral part of the RI is the evaluation of human health risks posed by hazardous substance releases. This risk evaluation serves a number of purposes within the overall context of the RI/FS process, the most essential of which is to provide an understanding of ``baseline`` risks posed by a given site. Baseline risks are those risks that would exist if no remediation or institutional controls are applied at a site. This document was written to (1) guide risk assessors through the process of interpreting EPA BRA policy and (2) help risk assessors to discuss EPA policy with regulators, decision makers, and stakeholders as it relates to conditions at a particular DOE site.

NONE

1995-03-01T23:59:59.000Z

274

Idaho National Engineering Laboratory (INEL) Environmental Restoration (ER) Program Baseline Safety Analysis File (BSAF)  

Science Conference Proceedings (OSTI)

The Baseline Safety Analysis File (BSAF) is a facility safety reference document for the Idaho National Engineering Laboratory (INEL) environmental restoration activities. The BSAF contains information and guidance for safety analysis documentation required by the U.S. Department of Energy (DOE) for environmental restoration (ER) activities, including: Characterization of potentially contaminated sites. Remedial investigations to identify and remedial actions to clean up existing and potential releases from inactive waste sites Decontamination and dismantlement of surplus facilities. The information is INEL-specific and is in the format required by DOE-EM-STD-3009-94, Preparation Guide for U.S. Department of Energy Nonreactor Nuclear Facility Safety Analysis Reports. An author of safety analysis documentation need only write information concerning that activity and refer to BSAF for further information or copy applicable chapters and sections. The information and guidance provided are suitable for: {sm_bullet} Nuclear facilities (DOE Order 5480-23, Nuclear Safety Analysis Reports) with hazards that meet the Category 3 threshold (DOE-STD-1027-92, Hazard Categorization and Accident Analysis Techniques for Compliance with DOE Order 5480.23, Nuclear Safety Analysis Reports) {sm_bullet} Radiological facilities (DOE-EM-STD-5502-94, Hazard Baseline Documentation) Nonnuclear facilities (DOE-EM-STD-5502-94) that are classified as {open_quotes}low{close_quotes} hazard facilities (DOE Order 5481.1B, Safety Analysis and Review System). Additionally, the BSAF could be used as an information source for Health and Safety Plans and for Safety Analysis Reports (SARs) for nuclear facilities with hazards equal to or greater than the Category 2 thresholds, or for nonnuclear facilities with {open_quotes}moderate{close_quotes} or {open_quotes}high{close_quotes} hazard classifications.

NONE

1995-09-01T23:59:59.000Z

275

Baseline requirements of the proposed action for the Transportation Management Division routing models  

Science Conference Proceedings (OSTI)

The potential impacts associated with the transportation of hazardous materials are important to shippers, carriers, and the general public. This is particularly true for shipments of radioactive material. The shippers are primarily concerned with safety, security, efficiency, and equipment requirements. The carriers are concerned with the potential impact that radioactive shipments may have on their operations--particularly if such materials are involved in an accident. The general public has also expressed concerns regarding the safety of transporting radioactive and other hazardous materials through their communities. Because transportation routes are a central concern in hazardous material transport, the prediction of likely routes is the first step toward resolution of these issues. In response to these routing needs, several models have been developed over the past fifteen years at Oak Ridge National Laboratory (ORNL). The HIGHWAY routing model is used to predict routes for truck transportation, the INTERLINE routing model is used to predict both rail and barge routes, and the AIRPORT locator model is used to determine airports with specified criteria near a specific location. As part of the ongoing improvement of the US Department of Energy`s (DOE) Environmental Management Transportation Management Division`s (EM-261) computer systems and development efforts, a Baseline Requirements Assessment Session on the HIGHWAY, INTERLINE, and AIRPORT models was held at ORNL on April 27, 1994. The purpose of this meeting was to discuss the existing capabilities of the models and data bases and to review enhancements of the models and data bases to expand their usefulness. The results of the Baseline Requirements Assessment Section will be discussed in this report. The discussions pertaining to the different models are contained in separate sections.

Johnson, P.E.; Joy, D.S.

1995-02-01T23:59:59.000Z

276

Coal Integrated Gasification Fuel Cell System Study  

DOE Green Energy (OSTI)

The pre-baseline configuration for an Integrated Gasification Fuel Cell (IGFC) system has been developed. This case uses current gasification, clean-up, gas turbine, and bottoming cycle technologies together with projected large planar Solid Oxide Fuel Cell (SOFC) technology. This pre-baseline case will be used as a basis for identifying the critical factors impacting system performance and the major technical challenges in implementing such systems. Top-level system requirements were used as the criteria to evaluate and down select alternative sub-systems. The top choice subsystems were subsequently integrated to form the pre-baseline case. The down-selected pre-baseline case includes a British Gas Lurgi (BGL) gasification and cleanup sub-system integrated with a GE Power Systems 6FA+e gas turbine and the Hybrid Power Generation Systems planar Solid Oxide Fuel Cell (SOFC) sub-system. The overall efficiency of this system is estimated to be 43.0%. The system efficiency of the pre-baseline system provides a benchmark level for further optimization efforts in this program.

Gregory Wotzak; Chellappa Balan; Faress Rahman; Nguyen Minh

2003-08-01T23:59:59.000Z

277

Integration of Renewables: Preprint  

DOE Green Energy (OSTI)

This is an overview of renewable energy technologies, especially those that can be used for distributed generation of electricity or heat. It This paper reviews the types of technologies, their present usage in the United States, their advantages in terms of resources, availability, modularity, emissions, and integration in distributed energy systems. It reviews some of the history of their use and projects their growth and cost.

Bull, S.

2004-11-01T23:59:59.000Z

278

GTA (ground test accelerator) Phase 1: Baseline design report  

DOE Green Energy (OSTI)

The national Neutral Particle Beam (NPB) program has two objectives: to provide the necessary basis for a discriminator/weapon decision by 1992, and to develop the technology in stages that lead ultimately to a neutral particle beam weapon. The ground test accelerator (GTA) is the test bed that permits the advancement of the state-of-the-art under experimental conditions in an integrated automated system mode. An intermediate goal of the GTA program is to support the Integrated Space Experiments, while the ultimate goal is to support the 1992 decision. The GTA system and each of its major subsystems are described, and project schedules and resource requirements are provided. (LEW)

Not Available

1986-08-01T23:59:59.000Z

279

General Merchandise 2009 TSD Chicago Low Plug Load Baseline | Open Energy  

Open Energy Info (EERE)

General Merchandise 2009 TSD Chicago Low Plug Load Baseline General Merchandise 2009 TSD Chicago Low Plug Load Baseline Jump to: navigation, search Model Name General Merchandise 2009 TSD Chicago Low Plug Load Baseline Building Type Mercantile (Retail Other Than Mall) Model Type Baseline Model Target Type ASHRAE 90.1 2004 Model Year 2009 IDF file http://apps1.eere.energy.gov/buildings/energyplus/models/Miami/2009_TSD_GeneralMerch_LPL_Baseline.idf XML file http://apps1.eere.energy.gov/buildings/energyplus/models/Miami/2009_TSD_GeneralMerch_LPL_Baseline.xml City, State Chicago, IL Climate Zone Climate Zone 5A Retrieved from "http://en.openei.org/w/index.php?title=General_Merchandise_2009_TSD_Chicago_Low_Plug_Load_Baseline&oldid=270182" Category: Building Models What links here Related changes Special pages

280

Idaho National Laboratorys Greenhouse Gas FY08 Baseline  

Science Conference Proceedings (OSTI)

A greenhouse gas (GHG) inventory is a systematic attempt to account for the production and release of certain gasses generated by an institution from various emission sources. The gasses of interest are those which have become identified by climate science as related to anthropogenic global climate change. This document presents an inventory of GHGs generated during fiscal year (FY) 2008 by Idaho National Laboratory (INL), a Department of Energy (DOE)-sponsored entity, located in southeastern Idaho. Concern about the environmental impact of GHGs has grown in recent years. This, together with a desire to decrease harmful environmental impacts, would be enough to encourage the calculation of a baseline estimate of total GHGs generated at INL. Additionally, INL has a desire to see how its emissions compare with similar institutions, including other DOE national laboratories. Executive Order 13514 requires that federal agencies and institutions document reductions in GHG emissions in the future, and such documentation will require knowledge of a baseline against which reductions can be measured. INL's FY08 GHG inventory was calculated according to methodologies identified in federal GHG guidance documents using operational control boundaries. It measures emissions generated in three Scopes: (1) INL emissions produced directly by stationary or mobile combustion and by fugitive emissions, (2) the share of emissions generated by entities from which INL purchased electrical power, and (3) indirect or shared emissions generated by outsourced activities that benefit INL (occur outside INL's organizational boundaries but are a consequence of INL's activities). This inventory found that INL generated a total of 113,049 MT of CO2-equivalent emissions during FY08. The following conclusions were made from looking at the results of the individual contributors to INL's baseline GHG inventory: (1) Electricity (including the associated transmission and distribution losses) is the largest contributor to INL's GHG inventory, with over 50% of the CO2e emissions; (2) Other sources with high emissions were stationary combustion (facility fuels), waste disposal (including fugitive emissions from the onsite landfill and contracted disposal), mobile combustion (fleet fuels), employee commuting, and business air travel; and (3) Sources with low emissions were wastewater treatment (onsite and contracted), fugitive emissions from refrigerants, and business ground travel (in personal and rental vehicles). This report details the methods behind quantifying INL's GHG inventory and discusses lessons learned on better practices by which information important to tracking GHGs can be tracked and recorded. It is important to note that because this report differentiates between those portions of INL that are managed and operated by the Battelle Energy Alliance (BEA) and those managed by other contractors, it includes only that large proportion of Laboratory activities overseen by BEA. It is assumed that other contractors will provide similar reporting for those activities they manage, where appropriate.

Jennifer D. Morton

2011-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "integrated baseline review" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

LTC vacuum blasting maching (concrete): Baseline report: Greenbook (Chapter)  

SciTech Connect

The LTC shot blast technology was tested and is being evaluated at Florida International University (FIU) as a baseline technology. In conjuction with FIU`s evaluation of efficiency and cost, this report covers the evaluation conducted for safety and health issues. It is a commercially available technology and has been used for various projects at locations throughout the country. The LTC 1073 Vacuum Blasting Machine uses a high-capacity, direct-pressure blasting system which incorporates a continuous feed for the blast media. The blast media cleans the surface within the contained brush area of the blast. It incorporates a vacuum system which removes dust and debris from the surface as it is blasted. The safety and health evaluation during the testing demonstration focused on two main areas of exposure: dust and noise. Dust exposure during maintenance activities was minimal, but due to mechanical difficulties dust monitoring could not be conducted during operation. Noise exposure was significant. Further testing for each of these exposures is recommended because of the outdoor environment where the testing demonstration took place. This may cause the results to be inaccurate. It is feasible that the dust and noise levels will be higher in an enclosed environment. In addition, other safety and health issues found were ergonomics, heat stress, tripping hazards, electrical hazards, lockout/tagout, and arm-hand vibration.

1997-07-31T23:59:59.000Z

282

LTC vacuum blasting machine (metal) baseline report: Greenbook (chapter)  

SciTech Connect

The LTC coating removal technology was tested and is being evaluated at Florida International University (FIU) as a baseline technology. In conjunction with FIU`s evaluation of efficiency and cost, this report covers the evaluation conducted for safety and health issues. It is a commercially available technology and has been used for various projects at locations throughout the country. The LTC coating removal system consisted of several hand tools, a Roto Peen scaler, and a needlegun. They are designed to remove coatings from steel, concrete, brick, and wood. These hand tools are used with the LTC PTC-6 vacuum system to capture dust and debris as removal of the coating takes place. The safety and health evaluation during the testing demonstration focused on two main areas of exposure: dust and noise. The dust exposure was minimal but noise exposure was significant. Further testing for each exposure is recommended because of the environment where the testing demonstration took place. It is feasible that the dust and noise levels will be higher in an enclosed operating environment of different construction. In addition, other areas of concern found were arm-hand vibration, whole-body vibration, ergonomics, heat stress, tripping hazards, electrical hazards, machine guarding, and lockout/tagout.

1997-07-31T23:59:59.000Z

283

Transuranic waste baseline inventory report. Revision No. 3  

SciTech Connect

The Transuranic Waste Baseline Inventory Report (TWBIR) establishes a methodology for grouping wastes of similar physical and chemical properties from across the U.S. Department of Energy (DOE) transuranic (TRU) waste system into a series of {open_quotes}waste profiles{close_quotes} that can be used as the basis for waste form discussions with regulatory agencies. The purpose of Revisions 0 and 1 of this report was to provide data to be included in the Sandia National Laboratories/New Mexico (SNL/NM) performance assessment (PA) processes for the Waste Isolation Pilot Plant (WIPP). Revision 2 of the document expanded the original purpose and was also intended to support the WIPP Land Withdrawal Act (LWA) requirement for providing the total DOE TRU waste inventory. The document included a chapter and an appendix that discussed the total DOE TRU waste inventory, including nondefense, commercial, polychlorinated biphenyls (PCB)-contaminated, and buried (predominately pre-1970) TRU wastes that are not planned to be disposed of at WIPP.

NONE

1996-06-01T23:59:59.000Z

284

Pentek metal coating removal system: Baseline report; Greenbook (chapter)  

SciTech Connect

The Pentek coating removal technology was tested and is being evaluated at Florida International University (FIU) as a baseline technology. In conjunction with FIU`s evaluation of efficiency and cost, this report covers evaluation conducted for safety and health issues. It is a commercially available technology and has been used for various projects at locations throughout the country. The Pentek coating removal system consisted of the ROTO-PEEN Scaler, CORNER-CUTTER{reg_sign}, and VAC-PAC{reg_sign}. They are designed to remove coatings from steel, concrete, brick, and wood. The Scaler uses 3M Roto Peen tungsten carbide cutters while the CORNER-CUTTER{reg_sign} uses solid needles for descaling activities. These hand tools are used with the VAC-PAC{reg_sign} vacuum system to capture dust and debris as removal of the coating takes place. The safety and health evaluation during the testing demonstration focused on two main areas of exposure: dust and noise. Dust exposure minimal, but noise exposure was significant. Further testing for each exposure is recommended because of the environment where the testing demonstration took place. It is feasible that the dust and noise levels will be higher in an enclosed operating environment of different construction. In addition, other areas of concern found were arm-hand vibration, whole-body, ergonomics, heat stress, tripping hazards, electrical hazards, machine guarding, and lockout/tagout.

1997-07-31T23:59:59.000Z

285

Concrete Cleaning, Inc. centrifugal shot blaster: Baseline report  

Science Conference Proceedings (OSTI)

The centrifugal shot blaster technology was tested and is being evaluated at Florida International University (FIU) as a baseline technology. In conjunction with FIU`s evaluation of efficiency and cost, this report covers the evaluation conducted for safety and health issues. It is a commercially available technology and has been used for various projects at locations throughout the country. The centrifugal shot blaster is an electronically operated shot blast machine that has been modified to remove layers of concrete to varying depths. A hardened steel shot propelled at a high rate of speed abrades the surface of the concrete. The depth of material removed is determined by the rate of speed the machine is traveling and the volume of shot being fired into the blast chamber. The steel shot is recycled and used over until it is pulverized into dust, which ends up in the waste container with the concrete being removed. Debris is continually vacuumed by a large dust collection system attached to the shot blaster. The safety and health evaluation during the human factors assessment focused on two main areas: noise and dust.

NONE

1997-07-31T23:59:59.000Z

286

3M heavy duty roto peen: Baseline report; Greenbook (chapter)  

SciTech Connect

The heavy-duty roto peen technology is being evaluated at Florida International University (FIU) as a baseline technology. It is a commercially available technology and has been used for various projects at locations throughout the country. In conjunction with FIU`s evaluation of efficiency and cost, this report covers the human factors assessment for safety and health issues. The heavy-duty roto peen allows for the selective removal of concrete substrates. The peen is a tungsten carbide shot brazed to a hardened steel rivet that is supported by a heavy-duty flexible flap. The shot rivet is kept captive to the tool by mounting the roto peen in a slotted hub. The heavy-duty roto peen is designed to be used with several commercially available pieces of equipment. The equipment being used will determine the width of each pass. The equipment being used with the roto peen is then connected to a vacuum system for dust collection during scabbling. The safety and health evaluation during the human factors assessment focused on two main areas: noise and dust.

NONE

1997-07-31T23:59:59.000Z

287

3M heavy duty roto peen: Baseline report  

SciTech Connect

The heavy-duty roto peen technology was being evaluated at Florida International University (FIU) as a baseline technology. It is a commercially available technology and has been used for various projects at locations throughout the country. In conjunction with FIU`s evaluation of efficiency and cost, this report covers the human factors assessment for safety and health issues. The heavy-duty roto peen allows for the selective removal of concrete substrates. The peen is a tungsten carbide shot brazed to a hardened steel rivet that is supported by a heavy-duty flexible flap. The shot rivet is kept captive to the tool by mounting the roto peen in a slotted hub. The heavy-duty roto peen is designed to be used with several commercially available pieces of equipment. The equipment being used will determine the width of each pass. The equipment being used with the roto peen is then connected to a vacuum system for dust collection during scabbling. The safety and health evaluation during the human factors assessment focused on two main areas: noise and dust.

NONE

1997-07-31T23:59:59.000Z

288

Remote Handling Concepts for the Long Baseline Neutrino Experiment  

SciTech Connect

The Long Baseline Neutrino Experiment (LBNE) is a DOE funded experiment aimed at furthering the understanding of neutrino physics. The high intensity neutrino beam for LBNE will be produced at Fermi National Accelerator Laboratory (FNAL) by delivering a high power, 120 GeV proton beam to an underground target facility. The design proton beam power on target is 700 kW with an expected future upgrade to 2.3 MW. Both these beam powers will be sufficient to activate critical equipment necessary for producing neutrinos; thus, the activated equipment must be maintained using remote handling tools and operations. Oak Ridge National Laboratory (ORNL) was tasked to develop concepts for the remote maintenance of the LBNE target equipment as well as provide recommendations for facility layouts. A discussion of the proposed LBNE Target Hall layout is presented along with concepts for the facility's remote handling systems and major remote operations. Concepts for replacement and maintenance of beam line components are also discussed.

Graves, Van B [ORNL; Carroll, Adam J [ORNL; Hurh, Patrick G. [FNAL

2011-01-01T23:59:59.000Z

289

Scientific Opportunities with the Long-Baseline Neutrino Experiment  

E-Print Network (OSTI)

In this document, we describe the wealth of science opportunities and capabilities of LBNE, the Long-Baseline Neutrino Experiment. LBNE has been developed to provide a unique and compelling program for the exploration of key questions at the forefront of particle physics. Chief among the discovery opportunities are observation of CP symmetry violation in neutrino mixing, resolution of the neutrino mass hierarchy, determination of maximal or near-maximal mixing in neutrinos, searches for nucleon decay signatures, and detailed studies of neutrino bursts from galactic supernovae. To fulfill these and other goals as a world-class facility, LBNE is conceived around four central components: (1) a new, intense wide-band neutrino source at Fermilab, (2) a fine-grained `near' neutrino detector just downstream of the source, (3) the Sanford Underground Research Facility (SURF) in Lead, South Dakota at an optimal distance (~1300 km) from the neutrino source, and (4) a massive liquid argon time-projection chamber (LArTPC) deployed there as a `far' detector. The facilities envisioned are expected to enable many other science opportunities due to the high event rates and excellent detector resolution from beam neutrinos in the near detector and atmospheric neutrinos in the far detector. This is a mature, well developed, world class experiment whose relevance, importance, and probability of unearthing critical and exciting physics has increased with time. This document is submitted as a white paper to the 2013 DPF Community Summer Study program.

C. Adams; T. Akiri; M. Andrews; I. Anghel; E. Arrieta-Diaz; M. Artuso; J. Asaadi; X. Bai; M. Baird; B. Balantekin; B. Baller; B. Baptista; D. Barker; W. Barletta; G. Barr; A. Bashyal; M. Bass; V. Bellini; B. E. Berger; M. Bergevin; E. Berman; H. Berns; A. Bernstein; R. Bernstein; V. Bhatnagar; B. Bhuyan; M. Bishai; A. Blake; E. Blaufuss; B. Bleakley; E. Blucher; S. Blusk; V. Bocean; T. Bolton; R. Breedon; A. Brandt; C. Bromberg; R. Brown; N. Buchanan; B. Bugg; L. Camilleri; R. Carr; G. Carminati; F. Cavanna; A. Chen; H. Chen; K. Chen; D. Cherdack; C. Chi; S. Childress; B. Choudhary; C. Christofferson; E. Church; D. Cline; T. Coan; J. Coelho; S. Coleman; J. Conrad; M. Convery; R. Corey; L. Corwin; G. S. Davies; S. Dazeley; A. de Gouvea; J. K. de Jong; C. Escobar; K. De; D. Demuth; M. Diwan; Z. Djurcic; J. Dolph; G. Drake; H. Duyang; S. Dye; D. Edmunds; S. Elliott; S. Eno; S. Enomoto; A. Farbin; L. Falk; J. Felde; F. Feyzi; L. Fields; B. Fleming; J. Fowler; W. Fox; A. Friedland; B. Fujikawa; H. Gallagher; R. Gandhi; G. Garvey; V. M. Gehman; G. Geronimo; R. Gill; M. C. Goodman; J. Goon; M. Graham; R. Gran; C. Grant; H. Greenlee; L. Greenler; V. Guarino; E. Guardincerri; R. Guenette; S. Habib; A. Habig; R. W. Hackenburg; A. Hahn; T. Haines; T. Handler; S. Hans; J. Hartnell; J. Harton; R. Hatcher; A. Hatzikoutelis; S. Hays; E. Hazen; M. Headley; A. Heavey; K. Heeger; J. Heise; R. Hellauer; A. Himmel; M. Hogan; A. Holin; G. Horton-Smith; J. Howell; P. Hurh; J. Huston; J. Hylen; R. Imlay; J. Insler; Z. Isvan; C. Jackson; D. Jaffe; C. James; M. Johnson; R. Johnson; S. Johnson; W. Johnston; J. Johnstone; B. Jones; H. Jostlein; T. Junk; R. Kadel; G. Karagiorgi; J. Kaspar; T. Katori; B. Kayser; E. Kearns; P. Keener; S. H. Kettell; M. Kirby; J. Klein; G. Koizumi; S. Kopp; W. Kropp; V. A. Kudryavtsev; A. Kumar; J. Kumar; T. Kutter; K. Lande; C. Lane; K. Lang; F. Lanni; R. Lanza; T. Latorre; F. La Zia; J. Learned; D. Lee; K. Lee; S. Li; Y. Li; Z. Li; J. Libo; S. Linden; J. Ling; J. Link; L. Littenberg; H. Liu; Q. Liu; T. Liu; J. Losecco; W. Louis; B. Lundberg; T. Lundin; C. Maesano; S. Magill; G. Mahler; S. Malys; F. Mammoliti; S. Mandal; A. Mann; A. Mann; P. Mantsch; A. Marchionni; W. Marciano; C. Mariani; J. Maricic; A. Marino; M. Marshak; J. Marshall; S. Matsuno; C. Mauger; N. Mayer; E. McCluskey; K. McDonald; K. McFarland; D. McKee; R. McKeown; R. McTaggart; R. Mehdiyev; D. Mei; Y. Meng; B. Mercurio; M. D. Messier; W. Metcalf; R. Meyhandan; R. Milincic; W. Miller; G. Mills; S. Mishra; S. Moed Sher; N. Mokhov; D. Montanari; C. D. Moore; J. Morfin; W. Morse; S. Mufson; D. Muller; J. Musser; D. Naples; J. Napolitano; M. Newcomer; E. Niner; B. Norris; T. Olson; B. Page; S. Pakvasa; J. Paley; O. Palamara; V. Paolone; V. Papadimitriou; S. Park; Z. Parsa; B. Paulos; K. Partyka; Z. Pavlovic; A. Perch; J. D. Perkin; S. Peeters; R. Petti; R. Plunkett; C. Polly; S. Pordes; R. Potenza; A. Prakash; O. Prokofiev; G. Perdue; X. Qian; J. L. Raaf; V. Radeka; R. Rajendran; I. Rakhno; R. Rameika; J. Ramsey; B. Rebel; S. Rescia; D. Reitzner; M. Richardson; K. Riesselman; M. Robinson; M. Ronquest; M. Rosen; C. Rosenfeld; R. Rucinski; S. Sahijpal; H. Sahoo; N. Samios; M. C. Sanchez; H. Schellman; R. Schmitt; D. Schmitz; J. Schneps; K. Scholberg; S. Seibert; M. Shaevitz; P. Shanahan; R. Sharma; T. Shaw; N. Simos; V. Singh; G. Sinnis; W. Sippach; T. Skwarnicki; M. Smy; H. Sobel; M. Soderberg; J. Sondericker; W. Sondheim; N. J. C. Spooner; M. Stancari; I. Stancu; A. Stefanik; J. Stewart; S. Stone; J. Strait; M. Strait; S. Striganov; G. Sullivan; L. Suter; R. Svoboda; B. Szczerbinska; M. Szydagis; A. Szelc; R. Talaga; M. Tamsett; S. Tariq; R. Tayloe; C. Taylor; D. Taylor; D. Taylor; A. Teymourian; H. Themann; M. Thiesse; J. Thomas; L. F. Thompson; M. Thomson; C. Thorn; X. Tian; D. Tiedt; W. Toki; N. Tolich; M. Tripathi; I. Tropin; M. Tzanov; J. Urheim; S. Usman; M. Vagins; R. Van Berg; R. Van de Water; G. Varner; K. Vaziri; G. Velev; B. Viren; T. Wachala; D. Wahl; A. Waldron; C. W. Walter; H. Wang; W. Wang; D. Warner; R. Wasserman; B. Watson; A. Weber; W. Wei; R. Wendell; M. Wetstein; A. White; H. White; L. Whitehead; D. Whittington; J. Willhite; W. Willis; R. J. Wilson; L. Winslow; E. Worcester; T. Wyman; T. Xin; K. Yarritu; J. Ye; J. Yu; M. Yeh; B. Yu; G. Zeller; C. Zhang; C. Zhang; E. D. Zimmerman; R. Zwaska

2013-07-28T23:59:59.000Z

290

Baseline Flowsheet Generation for the Treatment and Disposal of Idaho National Engineering and Environmental Laboratory Sodium Bearing Waste  

Science Conference Proceedings (OSTI)

The High-Level Waste (HLW) Program at the Idaho National Engineering and Environmental Laboratory (INEEL) must implement technologies and processes to treat and qualify radioactive wastes located at the Idaho Nuclear Technology and Engineering Center (INTEC) for permanent disposal. This paper describes the approach and accomplishments to date for completing development of a baseline vitrification treatment flowsheet for sodium-bearing waste (SBW), including development of a relational database used to manage the associated process assumptions. A process baseline has been developed that includes process requirements, basis and assumptions, process flow diagrams, a process description, and a mass balance. In the absence of actual process or experimental results, mass and energy balance data for certain process steps are based on assumptions. Identification, documentation, validation, and overall management of the flowsheet assumptions are critical to ensuring an integrated, focused program. The INEEL HLW Program initially used a roadmapping methodology, developed through the INEEL Environmental Management Integration Program, to identify, document, and assess the uncertainty and risk associated with the SBW flowsheet process assumptions. However, the mass balance assumptions, process configuration and requirements should be accessible to all program participants. This need resulted in the creation of a relational database that provides formal documentation and tracking of the programmatic uncertainties related to the SBW flowsheet.

Barnes, Charles Marshall; Lauerhass, Lance; Olson, Arlin Leland; Taylor, Dean Dalton; Valentine, James Henry; Lockie, Keith Andrew

2002-02-01T23:59:59.000Z

291

Baseline Flowsheet Generation for the Treatment and Disposal of Idaho National Engineering and Environmental Laboratory Sodium Bearing Waste  

Science Conference Proceedings (OSTI)

The High-Level Waste (HLW) Program at the Idaho National Engineering and Environmental Laboratory (INEEL) must implement technologies and processes to treat and qualify radioactive wastes located at the Idaho Nuclear Technology and Engineering Center (INTEC) for permanent disposal. This paper describes the approach and accomplishments to date for completing development of a baseline vitrification treatment flowsheet for sodium-bearing waste (SBW), including development of a relational database used to manage the associated process assumptions. A process baseline has been developed that includes process requirements, basis and assumptions, process flow diagrams, a process description, and a mass balance. In the absence of actual process or experimental results, mass and energy balance data for certain process steps are based on assumptions. Identification, documentation, validation, and overall management of the flowsheet assumptions are critical to ensuring an integrated, focused program. The INEEL HLW Program initially used a roadmapping methodology, developed through the INEEL Environmental Management Integration Program, to identify, document, and assess the uncertainty and risk associated with the SBW flowsheet process assumptions. However, the mass balance assumptions, process configuration and requirements should be accessible to all program participants. This need resulted in the creation of a relational database that provides formal documentation and tracking of the programmatic uncertainties related to the SBW flowsheet.

Barnes, C.M.; Lauerhass, L.; Olson, A.L.; Taylor, D.D.; Valentine, J.H.; Lockie, K.A. (DOE- ID)

2002-01-16T23:59:59.000Z

292

Independent Oversight Review, Los Alamos National Laboratory- December 2011  

Energy.gov (U.S. Department of Energy (DOE))

Review of the Independent Integrated Safety Management/Integrated Work Management Assessment of Research and Development and Programmatic Work at the Los Alamos National Laboratory

293

Book Reviews Book Reviews*  

E-Print Network (OSTI)

Book Reviews Book Reviews* J. Am. Chem. SOC.,Vol. 108, No. 17, 1986 5313 Handbook of Gaussian Basis + 556 pp. $85.00. This book is a collection of chapters authored by individuals or groups experienced. The present book, dealing with the latter topic, is one of the only extensive intro- ductions of which I am

Pines, Alexander

294

Long-Term Stewardship Baseline Report and Transition Guidance  

SciTech Connect

Long-term stewardship consists of those actions necessary to maintain and demonstrate continued protection of human health and the environment after facility cleanup is complete. As the Department of Energys (DOE) lead laboratory for environmental management programs, the Idaho National Engineering and Environmental Laboratory (INEEL) administers DOEs long-term stewardship science and technology efforts. The INEEL provides DOE with technical, and scientific expertise needed to oversee its long-term environmental management obligations complexwide. Long-term stewardship is administered and overseen by the Environmental Management Office of Science and Technology. The INEEL Long-Term Stewardship Program is currently developing the management structures and plans to complete INEEL-specific, long-term stewardship obligations. This guidance document (1) assists in ensuring that the program leads transition planning for the INEEL with respect to facility and site areas and (2) describes the classes and types of criteria and data required to initiate transition for areas and sites where the facility mission has ended and cleanup is complete. Additionally, this document summarizes current information on INEEL facilities, structures, and release sites likely to enter long-term stewardship at the completion of DOEs cleanup mission. This document is not intended to function as a discrete checklist or local procedure to determine readiness to transition. It is an overarching document meant as guidance in implementing specific transition procedures. Several documents formed the foundation upon which this guidance was developed. Principal among these documents was the Long-Term Stewardship Draft Technical Baseline; A Report to Congress on Long-Term Stewardship, Volumes I and II; Infrastructure Long-Range Plan; Comprehensive Facility Land Use Plan; INEEL End-State Plan; and INEEL Institutional Plan.

Kristofferson, Keith

2001-11-01T23:59:59.000Z

295

Book reviews  

Science Conference Proceedings (OSTI)

If you are interested in reviewing books for intelligence, please contact book review editor Karen Sutherland at intelligence_book-reviews@acm.org.

Karen Sutherland

2001-12-01T23:59:59.000Z

296

Baseline System Costs for 50.0 MW Enhanced Geothermal System...  

Open Energy Info (EERE)

Baseline System Costs for 50.0 MW Enhanced Geothermal System -- A Function of: Working Fluid, Technology, and Location Geothermal Project Jump to: navigation, search Last modified...

297

Virtual Long Baseline (VLBL) autonomous underwater vehicle navigation using a single transponder .  

E-Print Network (OSTI)

??This thesis presents a simulation of autonomous underwater vehicle navigation using a single transponder to create a virtual long baseline (VLBL). Similarly to LBL systems, (more)

LaPointe, Cara E. G.

2006-01-01T23:59:59.000Z

298

Baseline avian use and behavior at the CARES wind plant site, Klickitat County, Washington  

SciTech Connect

This report presents a literature review on avian-wind turbine interactions and the results of a one-year avian baseline study conducted in 1998 at the proposed Conservation and Renewable Energy System (CARES) wind development site in Klickitat County, Washington. Avian use of the site ranged from 1.11/survey in the winter to 5.69/survey in the spring. Average use by passerines in the study plots ranged from 1.15 minutes/survey in the winter to 40.98 minutes/survey in the spring. Raptors spent much less time within plots than other groups, ranging from 0.05 minutes/survey in the winter to 0.77 minutes/survey during the fall. Thirteen percent of all flying birds were within the rotor-swept height (25 to 75 m); 41.6% of all raptors were flying at this height. Raptors with the greatest potential turbine exposure are red-tailed hawks and golden eagles. Passerines with the highest turbine exposure are common ravens, American robins, and horned larks. Spatial use data for the site indicate that avian use tends to be concentrated near the rim, indicating that placing turbines away from the rim may reduce risk. Avian use data at the CARES site indicate that if a wind plant is constructed in the future, avian mortality would likely be relatively low.

Erickson, W.P.; Johnson, G.D.; Strickland, M.D.; Kronner, K.; Becker, P.S.; Orloff, S.

2000-01-03T23:59:59.000Z

299

Integral transformation and Darboux transformation  

E-Print Network (OSTI)

We review Darboux-Crum transformation of Heun's differential equation. By rewriting an integral transformation of Heun's differential equation into a form of elliptic functions, we see that the integral representation is a generalization of Darboux-Crum transformation. We also consider conservation of monodromy with respect to the transformations.

Takemura, Kouichi

2009-01-01T23:59:59.000Z

300

Aerial Measuring System (AMS) Baseline Surveys for Emergency Planning  

SciTech Connect

Originally established in the 1960s to support the Nuclear Test Program, the AMS mission is to provide a rapid and comprehensive worldwide aerial measurement, analysis, and interpretation capability in response to a nuclear/radiological emergency. AMS provides a responsive team of individuals whose processes allow for a mission to be conducted and completed with results available within hours. This presentation slide-show reviews some of the history of the AMS, summarizes present capabilities and methods, and addresses the value of the surveys.

Lyons, C

2012-06-04T23:59:59.000Z

Note: This page contains sample records for the topic "integrated baseline review" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Baseline effects on carbon footprints of biofuels: The case of wood  

Science Conference Proceedings (OSTI)

As biofuel usage has boomed over the past decade, so has research and regulatory interest in its carbon accounting. This paper examines one aspect of that carbon accounting: the baseline, i.e. the reference case against which other conditions or changes can be compared. A literature search and analysis identified four baseline types: no baseline; reference point; marginal fossil fuel; and biomass opportunity cost. The fourth one, biomass opportunity cost, is defined in more detail, because this is not done elsewhere in the literature. The four baselines are then applied to the carbon footprint of a wood-fired power plant. The footprint of the resulting wood-fired electricity varies dramatically, according to the type of baseline. Baseline type is also found to be the footprint's most significant sensitivity. Other significant sensitivities are: efficiency of the power plant; the growth (or re-growth) rate of the forest that supplies the wood; and the residue fraction of the wood. Length of the policy horizon is also an important factor in determining the footprint. The paper concludes that because of their significance and variability, baseline choices should be made very explicit in biofuel carbon footprints. - Highlights: Black-Right-Pointing-Pointer Four baseline types for biofuel footprinting are identified. Black-Right-Pointing-Pointer One type, 'biomass opportunity cost', is defined mathematically and graphically. Black-Right-Pointing-Pointer Choice of baseline can dramatically affect the footprint result. Black-Right-Pointing-Pointer The 'no baseline' approach is not acceptable. Black-Right-Pointing-Pointer Choice between the other three baselines depends on the question being addressed.

Johnson, Eric, E-mail: johnsonatlantic@gmail.com [Atlantic Consulting, 8136 Gattikon (Switzerland); Tschudi, Daniel [ETH, Berghaldenstrasse 46, 8800 Thalwil (Switzerland)

2012-11-15T23:59:59.000Z

302

Wellbore Integrity Network  

SciTech Connect

In this presentation, we review the current state of knowledge on wellbore integrity as developed in the IEA Greenhouse Gas Programme's Wellbore Integrity Network. Wells are one of the primary risks to the successful implementation of CO{sub 2} storage programs. Experimental studies show that wellbore materials react with CO{sub 2} (carbonation of cement and corrosion of steel) but the impact on zonal isolation is unclear. Field studies of wells in CO{sub 2}-bearing fields show that CO{sub 2} does migrate external to casing. However, rates and amounts of CO{sub 2} have not been quantified. At the decade time scale, wellbore integrity is driven by construction quality and geomechanical processes. Over longer time-scales (> 100 years), chemical processes (cement degradation and corrosion) become more important, but competing geomechanical processes may preserve wellbore integrity.

Carey, James W. [Los Alamos National Laboratory; Bachu, Stefan [Alberta Innovates

2012-06-21T23:59:59.000Z

303

Grid Integration  

SciTech Connect

Summarizes the goals and activities of the DOE Solar Energy Technologies Program efforts within its grid integration subprogram.

Not Available

2008-09-01T23:59:59.000Z

304

A heuristic method based on genetic algorithm for the baseline-product design  

Science Conference Proceedings (OSTI)

Product family planning is important for mass customization. All the products in a product family are actually transformed from a common product, which is referred to as baseline-product in this study. In this paper, we propose a heuristic method for ... Keywords: Baseline-product, Genetic algorithm, Heuristics, Product design, Product family

Adam L. Chen; Daniel H. Martinez

2012-04-01T23:59:59.000Z

305

U.S. Biofuels Baseline and Impact of E-15 Expansion on Biofuel Markets  

E-Print Network (OSTI)

May 2012 U.S. Biofuels Baseline and Impact of E-15 Expansion on Biofuel Markets FAPRI-MU Report #02 for agricultural and biofuel markets.1 That baseline assumes current biofuel policy, including provisions credit expired, as scheduled, at the end of 2011. The additional tax credit for cellulosic biofuel

Noble, James S.

306

Comparison of different approaches for removal of baseline wander from ECG signal  

Science Conference Proceedings (OSTI)

Baseline wandering can mask some important features of the Electrocardiogram (ECG) signal hence it is desirable to remove this noise for proper analysis and display of the ECG signal. This paper presents the implementation and evaluation of different ... Keywords: ECG, ECG filtering, MIT-BIH, PSD, QRS, baseline wander, drifting, filtering, noise, polynomial fitting, power spectral density, wavelet

M. Kaur; B. Singh; Seema

2011-02-01T23:59:59.000Z

307

Biofuels: Review of Policies and Impacts  

E-Print Network (OSTI)

CFGE. Sugarcane-based bioethanol: Energy for sustain- ablemarket integration for bioethanol. Delhi Business Review,e?ciency in European bioethanol production for automotive

Janda, Karel; Kristoufek, Ladislav; Zilberman, David

2011-01-01T23:59:59.000Z

308

Review of the Independent Integrated Safety Management/Integrated...  

NLE Websites -- All DOE Office Websites (Extended Search)

of Research and Development and Programmatic Work at the Los Alamos National Laboratory December 2011 Office of Safety and Emergency Management Evaluations Office of...

309

Published Peer Reviews | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Published Peer Reviews Published Peer Reviews Published Peer Reviews Peer Review Agenda Vehicle Technologies Annual Merit Review Effects of Intermediate Ethanol Blends on Legacy Vehicles and Small Non-Road Engines, Report 1 (pdf) Peer Review Plan for influential scientific assessment entitled, "Effects of Intermediate Ethanol Blends on Legacy Vehicles and Small Non-Road Engines, Report 1." (pdf) Peer Review Plan for Highly Influential Scientific Assessment entitled, "Climate Models: An Assessment of Strengths and Limitations for User Applications" (pdf) Peer Review Plan for Highly Influential Scientific Assessment entitled, "Synthesis and Assessment Report on Scenarios of Greenhouse Gas Emissions and Atmospheric Concentrations and Review of Integrated Scenario

310

Commercial Buildings Integration Program  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Buildings Buildings Integration Program Arah Schuur Program Manager arah.schuur@ee.doe.gov April 2, 2013 Building Technologies Office Program Peer Review 2 | Building Technologies Office eere.energy.gov Vision Commercial buildings are constructed, operated, renovated and transacted with energy performance in mind and net zero ready commercial buildings are common and cost-effective. Commercial Buildings Integration Program Mission Accelerate voluntary uptake of significant energy performance improvements in existing and new commercial buildings. 3 | Building Technologies Office eere.energy.gov BTO Goals: BTO supports the development and deployment of technologies and systems to reduce

311

Review of storage battery system cost estimates  

DOE Green Energy (OSTI)

Cost analyses for zinc bromine, sodium sulfur, and lead acid batteries were reviewed. Zinc bromine and sodium sulfur batteries were selected because of their advanced design nature and the high level of interest in these two technologies. Lead acid batteries were included to establish a baseline representative of a more mature technology.

Brown, D.R.; Russell, J.A.

1986-04-01T23:59:59.000Z

312

Cost and performance baseline for fossil energy plants  

SciTech Connect

The objective of this report is to present performance and cost data for fossil energy power systems, specifically integrated gasification combined cycle (IGCC), pulverized coal (PC), and natural gas combined cycle (NGCC) plants, in a consistent technical and economic manner that accurately reflects current market conditions for plants starting operation in 2010. This is Volume 2 of the three-volume report. Twelve different power plant design configurations were analyzed. These include six IGCC cases utilizing the General Electric Energy (GEE), ConocoPhillips (CoP), and Shell gasifiers each with and without CO{sub 2} capture, and six cases representing conventional technologies: PC-subcritical, PC-supercritical, and NGCC plants both with and without CO{sub 2} capture. Cases 7 and 8 were originally included in this study and involve production of synthetic natural gas (SNG) and the repowering of an existing NGCC facility using SNG. The two SNG cases were subsequently moved to Volume 2 of this report resulting in the discontinuity of case numbers (1-6 and 9-14). Chapter 2 provides the basis for technical, environmental and cost evaluations. Chapter 3 describes the IGCC technologies modeled and presents the results for the six IGCC cases. Chapter 4 describes the PC technologies modeled and presents the results for the four PC cases. Chapter 5 described the NGCC technologies modeled and presents the results for the two NGCC cases. Chapter 6 contains the reference list. 64 refs., 253 exhibits.

NONE

2007-05-15T23:59:59.000Z

313

Baseline Gas Turbine Development Program. Tenth quarterly progress report  

DOE Green Energy (OSTI)

Progress is reported for a program to demonstrate by 1976 an experimental gas turbine powered automobile which meets the 1978 Federal Emissions Standards, has significantly improved fuel economy, and is competitive in performance, reliability, and potential manufacturing cost with the conventional piston engine powered, standard size American automobile. A fuel control system is being developed to allow program evaluation of a very promising low emissions, single stage, fixed geometry proprietary burner. Ceramic regenerators are under test in the free-rotor vehicle, and some have completed 30 hours of performance evaluation. Three-dimensional ceramic regenerator transient thermal and structural analysis programs are operational. Initial friction and wear test fixture results show that zirconium oxide fully stabilized by yttrium oxide is an effective substitute for nickel oxide in a plasma sprayed seal. A preprototype control system was adapted for variable inlet guide vane control in a vehicle installation. An evaluation of the free-rotor accessory drive concept in a vehicle showed no serious mechanical integrity problems. Simplifications are being made to the water injection system; significant metallurgical analysis of observed erosion/corrosion problems was accomplished. Variable inlet guide vane aerodynamic loss characteristics were determined. Generally satisfactory results with linerless insulation are resulting in extended use and application. Pattern work for the upgraded engine housing and the power turbine wheel castings are in process. A computer design analysis of the regenerator drive gears was made, and an analysis was completed of a three peripheral roller regenerator support and drive proposal for the upgraded engine.

Schmidt, F.W.; Wagner, C.E.

1975-04-30T23:59:59.000Z

314

Residential Buildings Integration Program  

NLE Websites -- All DOE Office Websites (Extended Search)

David Lee David Lee Program Manager David.Lee@ee.doe.gov 202-287-1785 April 2, 2013 Residential Buildings Integration Program Building Technologies Office Program Peer Review 2 | Building Technologies Office eere.energy.gov Sub-Programs for Review Better Buildings Neighborhood Program Building America Challenge Home Home Energy Score Home Performance with ENERGY STAR Solar Decathlon 3 | Building Technologies Office eere.energy.gov How Residential Buildings Fits into BTO Research & Development * Develop technology roadmaps * Prioritize opportunities * Solicit and select innovative technology solutions * Collaborate with researchers

315

Residential Buildings Integration Program  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

David Lee David Lee Program Manager David.Lee@ee.doe.gov 202-287-1785 April 2, 2013 Residential Buildings Integration Program Building Technologies Office Program Peer Review 2 | Building Technologies Office eere.energy.gov Sub-Programs for Review Better Buildings Neighborhood Program Building America Challenge Home Home Energy Score Home Performance with ENERGY STAR Solar Decathlon 3 | Building Technologies Office eere.energy.gov How Residential Buildings Fits into BTO Research & Development * Develop technology roadmaps * Prioritize opportunities * Solicit and select innovative technology solutions * Collaborate with researchers

316

Review Reports | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

April 15, 2013 April 15, 2013 Independent Oversight Review, Advanced Mixed Waste Treatment Project - April 2013 Review of Radiation Protection Program Implementation at the Advanced Mixed Waste Treatment Project of the Idaho Site April 15, 2013 Independent Oversight Review, Portsmouth Gaseous Diffusion Plant - April 2013 Review of the Integrated Safety Management System Phase I Verification Review at the Portsmouth Gaseous Diffusion Plant April 11, 2013 Independent Oversight Review, DOE/NNSA Nuclear Facilities - April 2013 Lessons Learned from the 2012 Targeted Reviews of Emergency Preparedness for Severe Natural Phenomena Events at Select DOE/NNSA Nuclear Facilities March 12, 2013 Independent Oversight Review, Idaho Site, March 2013 Review of the Facility Representative Program at the Idaho Site

317

Retrieval system for emplaced spent unreprocessed fuel (SURF) in salt bed depository. Baseline concept criteria specifications and mechanical failure probabilities  

SciTech Connect

One of the integral elements of the Nuclear Waste Management Program is the material handling task of retrieving Canisters containing spent unreprocessed fuel from their emplacement in a deep geologic salt bed Depository. A study of the retrieval concept data base predicated this report. In this report, alternative concepts for the tasks are illustrated and critiqued, a baseline concept in scenario form is derived and basic retrieval subsystem specifications are presented with cyclic failure probabilities predicted. The report is based on the following assumptions: (a) during retrieval, a temporary radiation seal is placed over each Canister emplacement; (b) a sleeve, surrounding the Canister, was initially installed during the original emplacement; (c) the emplacement room's physical and environmental conditions established in this report are maintained while the task is performed.

Hudson, E.E.; McCleery, J.E.

1979-05-01T23:59:59.000Z

318

MELCOR Peer Review  

Science Conference Proceedings (OSTI)

MELCOR is a fully integrated, engineering-level computer code that models the progression of severe accidents in light water reactor nuclear power plants. The newest version of MELCOR is Version 1.8.1, July 1991. MELCOR development has reached the point that the United States Nuclear Regulatory Commission sponsored a broad technical review by recognized experts to determine or confirm the technical adequacy of the code for the serious and complex analyses it is expected to perform. For this purpose, an eight-member MELCOR Peer Review Committee was organized. The Committee has completed its review of the MELCOR code: the review process and findings of the MELCOR Peer Review Committee are documented in this report. The Committee has determined that recommendations in five areas are appropriate: (1) MELCOR numerics, (2) models missing from MELCOR Version 1.8.1, (3) existing MELCOR models needing revision, (4) the need for expanded MELCOR assessment, and (5) documentation.

Boyack, B.E. [Los Alamos National Lab., NM (United States); Dhir, V.K. [Santa Monica, CA. (United States); Gieseke, J.A. [Battelle, Columbus, OH (United States); Haste, T.J. [AEA Technology, Winfrith (United Kingdom); Kenton, M.A. [Gabor, Kenton and Associates, Inc., Westmont, IL (United States); Khatib-Rahbar, M. [Energy Research, Inc., Rockville, MD (United States); Leonard, M.T. [Science Applications International Corp., Wolfheze (Netherlands); Viskanta, R. [Purdue Univ., Lafayette, IN (United States). Heat Transfer Lab.

1992-03-01T23:59:59.000Z

319

Review: Integrating Climate, Energy and Air Pollution  

E-Print Network (OSTI)

Political Power in the Age of Oil (2011). Bryner provides aas coal (pp. 71-72), using oil and gas instead of renewablethe development of U.S. oil consumption, and agricultural

Toohey, David E.

2013-01-01T23:59:59.000Z

320

Review: Integrating Climate, Energy and Air Pollution  

E-Print Network (OSTI)

history of widespread use of renewable energy until the mid-Nineteenth Century, the development of U.S. oil

Toohey, David E.

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "integrated baseline review" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

WASC EDUCATIONAL EFFECTIVENESS REVIEW INTEGRATIVE ESSAY  

E-Print Network (OSTI)

for resource allocation, long-term assessments of educational effectiveness, broadly construed, must undergraduates, primarily because of the faculty time they absorb and the costs of student support. The campus increasingly invested in information technology, we will be able to collect better data in cost effective ways

California at Santa Cruz, University of

322

Baseline drift effect on the performance of neutron and gamma ray discrimination using frequency gradient analysis  

E-Print Network (OSTI)

Frequency gradient analysis (FGA) effectively discriminates neutrons and gamma rays by examining the frequency-domain features of the photomultiplier tube anode signal. This approach is insensitive to noise but is inevitably affected by the baseline drift, similar to other pulse shape discrimination methods. The baseline drift effect is attributed to the factors such as power line fluctuation, dark current, noise disturbances, hum, and pulse tail in front-end electronics. This effect needs to be elucidated and quantified before the baseline shift can be estimated and removed from the captured signal. Therefore, the effect of baseline shift on the discrimination performance of neutrons and gamma rays with organic scintillation detectors using FGA is investigated in this paper. The relationship between the baseline shift and discrimination parameters of FGA is derived and verified by an experimental system consisting of an americium-beryllium source, a BC501A liquid scintillator detector, and a 5 GSPS 8-bit oscilloscope. Both theoretical and experimental results show that the estimation of the baseline shift is necessary, and the removal of baseline drift from the pulse shapes can improve the discrimination performance of FGA.

Guofu Liu; Xiaoliang Luo; Jun Yang; Cunbao Lin; Qingqing Hu; Jinxian Peng

2013-05-08T23:59:59.000Z

323

SRC-1: coal liquefaction demonstration plant. Project Baseline assessment report supplement  

Science Conference Proceedings (OSTI)

ICRC issued a Revised Baseline for the SRC-I Demonstration Project in order to incorporate the results of these research activities and the changes in the design that had occurred since FY82. The Revised Baseline, prepared by ICRC, provides the necessary information for any future government or commercial decisions relating to the design, construction and operation of an SRC-I-type coal liquefaction facility. No further activities to complete the design of the demonstration plant, or to proceed with construction are planned by DOE. The Project Baseline is an ICRC-documented reference for controlling any future project work and cost. The original Baseline was issued in March 1982; this summary document is available from National Technical Information Service (NTIS) as document number DOE/ORO/030540-T13. The Revised Baseline (dated April 1984) is available as document numbers DOE/OR/03054-T14 and T16. Supporting documentation, in the main concerned with research activities undertaken in support of the design, is also available from NTIS as DOE/OR/03054-T1 through T10 and DOE/OR/03054-1 through 125. The Baseline itself is made up of a documented design configuration, a documented estimate, in First Quarter Fiscal Year 1982 Dollars (1QFY82$), and a detailed schedule of the activities required to complete the project as of 3QFY82. The Baseline design is embodied in the 26 process design packages and other support documentation identified in the Baseline, as well as preliminary engineering flow diagrams prepared for all of the major process areas of the plant. All elements of the Project Baseline were developed within the constraints of the project criteria.

Not Available

1984-09-01T23:59:59.000Z

324

Innovative coke oven gas cleaning system for retrofit applications. Environmental Monitoring program. Volume 1 - sampling progrom report. Baseline Sampling Program report  

Science Conference Proceedings (OSTI)

Bethlehem Steel Corporation (BSC), in conjunction with the Department of Energy (DOE) is conducting a Clean Coal Technology (CCT) project at its Sparrows Point, Maryland Coke Oven Plant. This innovative coke oven gas cleaning system combines several existing technologies into an integrated system for removing impurities from Coke Oven Gas (COG) to make it an acceptable fuel. DOE provided cost-sharing under a Cooperative Agreement with BSC. This Cooperative Agreement requires BSC to develop and conduct and Environmental Monitoring Plan for the Clean Coal Technology project and to report the status of the EMP on a quarterly basis. It also requires the preparation of a final report on the results of the Baseline Compliance and Supplemental Sampling Programs that are part of the EMP and which were conducted prior to the startup of the innovative coke oven gas cleaning system. This report is the Baseline Sampling Program report.

Stuart, L.M.

1994-05-27T23:59:59.000Z

325

Energy Systems Integration | OpenEI Community  

Open Energy Info (EERE)

Literature Review Literature Review Type Term Title Author Replies Last Post sort icon Document Literature Review A Framework for the Optimization of Integrated Energy Systems(Jain and Alleyne 2012) Qinsun 15 Nov 2012 - 13:19 Document Literature Review Energy System Integration(Smith 2001) Qinsun 15 Nov 2012 - 13:09 Document Literature Review Integrated Energy Systems (IES) for Buildings: A Market Assessment(LeMar 2002) Qinsun 15 Nov 2012 - 13:05 Document Literature Review Optimal Power Flow of Multiple Energy Carriers(Geidl and Andersson 2007) Qinsun 15 Nov 2012 - 13:04 Document Literature Review Energy Forms or Energy Carriers(G, Herrmann et al. 1983) Qinsun 15 Nov 2012 - 10:28 Groups Menu You must login in order to post into this group.

326

PROSPECT - A Precision Reactor Neutrino and Oscillation Spectrum Experiment at Very Short Baselines  

E-Print Network (OSTI)

Antineutrino detectors operated close to a compact research reactor can provide excellent sensitivity to short-baseline oscillation effects through a precision measurement of the reactor antineutrino spectrum at various distances from the core. We describe a proposed 2-detector experiment with a baseline of 4-20m that will enable a high-precision measurement of the reactor antineutrino spectrum from a highly-enriched uranium core at a US research reactor and provide a definitive search for short-baseline neutrino oscillations. In addition, this experiment will provide important enabling technology for reactor monitoring applications.

Z. Djurcic; S. Hans; M. Yeh; E. Blucher; R. Johnson; B. R. Littlejohn; M. Dolinski; C. Lane; T. Allen; S. Morrell; J. G. Learned; J. Maricic; A. Bernstein; N. S. Bowden; T. Classen; A. Glenn; N. Zaitseva; H. P. Mumm; J. S. Nico; R. E. Williams; R. Henning; C. Bryan; D. Dean; Y. Efremenko; D. Radford; P. Huber; J. M. Link; C . Mariani; A. B. Balantekin; H. R. Band; J. C. Cherwinka; K. M. Heeger; W. Wang; T. Langford

2013-09-29T23:59:59.000Z

327

PROSPECT - A Precision Reactor Neutrino and Oscillation Spectrum Experiment at Very Short Baselines  

E-Print Network (OSTI)

Antineutrino detectors operated close to a compact research reactor can provide excellent sensitivity to short-baseline oscillation effects through a precision measurement of the reactor antineutrino spectrum at various distances from the core. We describe a proposed 2-detector experiment with a baseline of 4-20m that will enable a high-precision measurement of the reactor antineutrino spectrum from a highly-enriched uranium core at a US research reactor and provide a definitive search for short-baseline neutrino oscillations. In addition, this experiment will provide important enabling technology for reactor monitoring applications.

Djurcic, Z; Yeh, M; Blucher, E; Johnson, R; Littlejohn, B R; Dolinski, M; Lane, C; Allen, T; Morrell, S; Learned, J G; Maricic, J; Bernstein, A; Bowden, N S; Classen, T; Glenn, A; Zaitseva, N; Mumm, H P; Nico, J S; Williams, R E; Henning, R; Bryan, C; Dean, D; Efremenko, Y; Radford, D; Huber, P; Link, J M; Mariani, C; Balantekin, A B; Band, H R; Cherwinka, J C; Heeger, K M; Wang, W; Langford, T

2013-01-01T23:59:59.000Z

328

The baseline data sets for Phase II of the combined experiment  

DOE Green Energy (OSTI)

The National Renewable Energy Laboratory`s ``Combined Experiment`` was initiated to provide an understanding of horizontal axis wind turbine aerodynamics and their effect on the turbine structure. To this end, aerodynamic and structural baseline data sets have been defined that examine turbine performance under certain conditions. These baseline results have been discussed thoroughly in several papers. This report is an addendum to those papers and supplies additional information about the data selected in creating the baseline data sets. Several appendices are included which contain the tape and cycle numbers of the selected data, along with the average and standard deviation values for the inflow conditions, velocity, and yaw.

Miller, M.S.; Shipley, D.E.; Young, T.S.; Robinson, M.C.; Luttges, M.W. [Colorado Univ., Boulder, CO (United States); Simms, D.A. [National Renewable Energy Lab., Golden, CO (United States)

1995-07-01T23:59:59.000Z

329

Insolation integrator  

DOE Patents (OSTI)

An electric signal representative of the rate of insolation is integrated to determine if it is adequate for operation of a solar energy collection system.

Dougherty, John J. (Norristown, PA); Rudge, George T. (Lansdale, PA)

1980-01-01T23:59:59.000Z

330

Book Review  

E-Print Network (OSTI)

Book Review: Bridging: How Gloria Anzalduas Life and Workoverlapping identities, the book is comprised of fiveand again (203). Fowler| Book Review: Bridging: How Gloria

Fowler, Rebecca

2013-01-01T23:59:59.000Z

331

Science Review Review Definitions  

NLE Websites -- All DOE Office Websites (Extended Search)

IPTS Proposal Review Ratings IPTS Proposal Review Ratings 5 Extraordinary The proposal involves cutting-edge research of great scientific importance. Proposed research will significantly advance knowledge in a specific field or scientific discipline. The characteristics of the SNS and/or HFIR are essential to the success of the proposed work. I believe this proposal must be supported with the highest priority. 4.5 Excellent to Extraordinary -- 4 Excellent The proposed research is of high quality and has potential for making an important contribution to a specific field or scientific discipline. The work is innovative and is likely to be published in a leading scientific journal. The use of SNS and/or HFIR is highly desirable for the success of the proposed work. I strongly recommend that this proposal

332

The Baseline Surface Radiation Network Pyrgeometer Round-Robin Calibration Experiment  

Science Conference Proceedings (OSTI)

With the aim of improving the consistency of terrestrial and atmospheric longwave radiation measurements within the Baseline Surface Radiation Network, five Eppley Precision Infrared Radiometer (PIR) pyrgeometers and one modified Meteorological ...

Rolf Philipona; Claus Frhlich; Klaus Dehne; John DeLuisi; John Augustine; Ellsworth Dutton; Don Nelson; Bruce Forgan; Peter Novotny; John Hickey; Steven P. Love; Steven Bender; Bruce McArthur; Atsumu Ohmura; John H. Seymour; John S. Foot; Masataka Shiobara; Francisco P. J. Valero; Anthony W. Strawa

1998-06-01T23:59:59.000Z

333

ABB SCADA/EMS System INEEL Baseline Summary Test Report (November 2004) |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

SCADA/EMS System INEEL Baseline Summary Test Report (November SCADA/EMS System INEEL Baseline Summary Test Report (November 2004) ABB SCADA/EMS System INEEL Baseline Summary Test Report (November 2004) This document covers the security evaluation of the "baseline" or "as delivered" system performed in the Idaho National Engineering and Environmental Laboratory (INEEL) SCADA test bed as part of the Critical Infrastructure Test Range Development Program, which is funded by the U.S. Department of Energy; Office of Energy Assurance (DOE/OEA). This report is a nonproprietary version of the report sent to ABB that identified specific issues related to the security vulnerabilities in the ABB SCADA/EMS system. Work was performed by specialists in the fields of control system development, networking, software engineering, and cybersecurity. This

334

Office of Civilian Radioactive Waste Management Program Cost and Schedule Baseline; Revision 3  

SciTech Connect

The purpose of this document is to establish quantitative expressions of proposed costs and schedule to serve as a basis for measurement of program performance. It identifies the components of the Program Cost and Schedule Baseline (PCSB) that will be subject to change control by the Executive (Level 0) and Program (Level 1) Change Control Boards (CCBS) and establishes their baseline values. This document also details PCSB reporting, monitoring, and corrective action requirements. The Program technical baseline contained in the Waste Management System Description (WMSD), the Waste Management System Requirements (WMSR), and the Physical System Requirements documents provide the technical basis for the PCSB. Changes to the PCSB will be approved by the Pregrain Change Control Board (PCCB)In addition to the PCCB, the Energy System Acquisition Advisory Board Baseline CCB (ESAAB BCCB) will perform control functions relating to Total Project Cost (TPC) and major schedule milestones for the Yucca Mountain Site Characterization Project and the Monitored Retrievable Storage (MRS) Project.

NONE

1992-09-01T23:59:59.000Z

335

INTRODUCING THE NEXT-GENERATION ADVANCED BASELINE IMAGER ON GOES-R  

Science Conference Proceedings (OSTI)

The Advanced Baseline Imager (ABI), designated to be one of the instruments on a future Geo-stationary Operational Environmental Satellite (GOES) series, will introduce a new era for U.S. geostationary environmental remote sensing. ABI is slated ...

Timothy J. Schmit; Mathew M. Gunshor; W. Paul Menzel; James J. Gurka; Jun Li; A. Scott Bachmeier

2005-08-01T23:59:59.000Z

336

Development of a GOES-R Advanced Baseline Imager Solar Channel Radiance Simulator for Ice Clouds  

Science Conference Proceedings (OSTI)

This paper describes the development of an ice cloud radiance simulator for the anticipated Geostationary Operational Environmental Satellite R (GOES-R) Advanced Baseline Imager (ABI) solar channels. The simulator is based on the discrete ...

Shouguo Ding; Ping Yang; Bryan A. Baum; Andrew Heidinger; Thomas Greenwald

2013-04-01T23:59:59.000Z

337

Integrated Waste Treatment Unit GFSI Risk Management Plan  

SciTech Connect

This GFSI Risk Management Plan (RMP) describes the strategy for assessing and managing project risks for the Integrated Waste Treatment Unit (IWTU) that are specifically within the control and purview of the U.S. Department of Energy (DOE), and identifies the risks that formed the basis for the DOE contingency included in the performance baseline. DOE-held contingency is required to cover cost and schedule impacts of DOE activities. Prior to approval of the performance baseline (Critical Decision-2) project cost contingency was evaluated during a joint meeting of the Contractor Management Team and the Integrated Project Team for both contractor and DOE risks to schedule and cost. At that time, the contractor cost and schedule risk value was $41.3M and the DOE cost and schedule risk contingency value is $39.0M. The contractor cost and schedule risk value of $41.3M was retained in the performance baseline as the contractor's management reserve for risk contingency. The DOE cost and schedule risk value of $39.0M has been retained in the performance baseline as the DOE Contingency. The performance baseline for the project was approved in December 2006 (Garman 2006). The project will continue to manage to the performance baseline and change control thresholds identified in PLN-1963, ''Idaho Cleanup Project Sodium-Bearing Waste Treatment Project Execution Plan'' (PEP).

W. A. Owca

2007-06-21T23:59:59.000Z

338

Integrated Waste Treatment Unit GFSI Risk Management Plan  

SciTech Connect

This GFSI Risk Management Plan (RMP) describes the strategy for assessing and managing project risks for the Integrated Waste Treatment Unit (IWTU) that are specifically within the control and purview of the U.S. Department of Energy (DOE), and identifies the risks that formed the basis for the DOE contingency included in the performance baseline. DOE-held contingency is required to cover cost and schedule impacts of DOE activities. Prior to approval of the performance baseline (Critical Decision-2) project cost contingency was evaluated during a joint meeting of the Contractor Management Team and the Integrated Project Team for both contractor and DOE risks to schedule and cost. At that time, the contractor cost and schedule risk value was $41.3M and the DOE cost and schedule risk contingency value is $39.0M. The contractor cost and schedule risk value of $41.3M was retained in the performance baseline as the contractor's management reserve for risk contingency. The DOE cost and schedule risk value of $39.0M has been retained in the performance baseline as the DOE Contingency. The performance baseline for the project was approved in December 2006 (Garman 2006). The project will continue to manage to the performance baseline and change control thresholds identified in PLN-1963, ''Idaho Cleanup Project Sodium-Bearing Waste Treatment Project Execution Plan'' (PEP).

W. A. Owca

2007-06-21T23:59:59.000Z

339

Baseline design/economics for advanced Fischer-Tropsch technology. Quarterly report, April--June 1994  

SciTech Connect

The objectives of this study are to: Develop a baseline design and two alternative designs for indirect liquefaction using advanced F-T technology. The baseline design uses Illinois No. 6 Eastern Coal and conventional refining. There is an alternative refining case using ZSM-5 treatment of the vapor steam from the flurry F-T reactor and an alternative coal case using Western coal from the Powder River Basin. Prepare the capital and operating costs for the baseline design and the alternatives. Individual plant costs for the alternative cases will be prorated on capacity, wherever possible, from the baseline case, develop a process flowsheet simulation (PFS) model. The baseline design, the economic analysis and computer model will be major research planning tools that Pittsburgh Energy Technology Center will use to plan, guide and evaluate its ongoing and future research and commercialization programs relating to indirect coal liquefaction for the manufacture of synthetic liquid fuels from coal. During the reporting period, work progressed on Tasks 1, 4, 5, 6 and 7. This report covers work done during the period and consists of six sections: introduction and summary; Task 1, baseline design and alternatives; Task 4, process flowsheet simulation (PFS) model; Task 5, perform sensitivity studies using the PFS model; Task 6, document the PFS model and develop a DOE training session on its use, and project management and staffing report.

NONE

1994-01-01T23:59:59.000Z

340

Statistical Analysis of Baseline Load Models for Non-Residential Buildings  

SciTech Connect

Policymakers are encouraging the development of standardized and consistent methods to quantify the electric load impacts of demand response programs. For load impacts, an essential part of the analysis is the estimation of the baseline load profile. In this paper, we present a statistical evaluation of the performance of several different models used to calculate baselines for commercial buildings participating in a demand response program in California. In our approach, we use the model to estimate baseline loads for a large set of proxy event days for which the actual load data are also available. Measures of the accuracy and bias of different models, the importance of weather effects, and the effect of applying morning adjustment factors (which use data from the day of the event to adjust the estimated baseline) are presented. Our results suggest that (1) the accuracy of baseline load models can be improved substantially by applying a morning adjustment, (2) the characterization of building loads by variability and weather sensitivity is a useful indicator of which types of baseline models will perform well, and (3) models that incorporate temperature either improve the accuracy of the model fit or do not change it.

Coughlin, Katie; Piette, Mary Ann; Goldman, Charles; Kiliccote, Sila

2008-11-10T23:59:59.000Z

Note: This page contains sample records for the topic "integrated baseline review" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Estimating Demand Response Load Impacts: Evaluation of Baseline Load Models for Non-Residential Buildings in California  

E-Print Network (OSTI)

This baseline load profile (BLP) is key toto as the baseline load profile or BLP and is keyactual and estimated load profiles look, Figure 1

Coughlin, Katie; Piette, Mary Ann; Goldman, Charles; Kiliccote, Sila

2008-01-01T23:59:59.000Z

342

Peer Review Oct 2005  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Peer Review Oct 2006.ppt | 10/17/2006 Peer Review Oct 2006.ppt | 10/17/2006 BOEING is a trademark of Boeing Management Company. Copyright © 2004 Boeing. All rights reserved. Superconducting Flywheel Development Phil Johnson FESS Program Manager Boeing Phantom Works DOE Energy Storage Systems 2006 Peer Review Boeing Technology | Phantom Works Superconducting Flywheel Development Peer Review Oct 2006.ppt | 2 Copyright © 2004 Boeing. All rights reserved. 50kW / 5kWh Flywheel Energy Storage System Off-Grid Demo System Objective: *Design, build and deliver a flywheel energy storage system tailored for off- grid applications utilizing a High Temperature Superconducting (HTS) Bearing Goal: *Successfully integrate the FESS system into a demonstration site One of three deployment options for the demo system, shown in relation to

343

Readiness Review Program  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Review Program Review Program FUNCTIONAL AREA GOAL: DOE/NNSA Headquarters and Field organizations and their contractors responsible for the startup and operation of nuclear facilities have defined and implemented contractual requirements to manage, evaluate, and approve the startup and restart of nuclear facilities and activities. REQUIREMENTS:  DOE Order 425.1C, Startup and Restart of Nuclear Facilities  DOE P 450.4, Safety Management System Policy  DOE/NNSA Safety Management Functions, Responsibilities and Authorities Manual Guidance:  DOE-STD-3006-2000, Planning and Conduct of Operational Readiness Reviews  DOE-HDBK- 3012-2003, Operational Readiness Review Team Leaders Handbook  DOE G 450.4-1B, Integrated Safety Management System Guide

344

Bio/consult as Horns Rev. Summary of baseline surveys Dok. nr. 2041-02-03-004, rev. 2  

E-Print Network (OSTI)

Bio/consult as Horns Rev. Summary of baseline surveys Dok. nr. 2041-02-03-004, rev. 2 Prep ................................................................................................................................9 #12;Bio/consult as Horns Rev. Summary of baseline surveys Dok. nr. 2041-02-03-004, rev. 2 Page 2 1 Figure 1. Map of locations sampled in June 2001. #12;Bio/consult as Horns Rev. Summary of baseline

345

AR5 WGIII Review  

NLE Websites -- All DOE Office Websites (Extended Search)

WGIII Review Print E-mail WGIII Review Print E-mail Intergovernmental Panel on Climate Change (IPCC) Fifth Assessment Report: Working Group III Introduction: The United States Global Change Research Program, in cooperation with the Department of State, request expert review of the Second Order Draft of the Working Group III Contribution to the Fifth Assessment Report of the Intergovernmental Panel on Climate Change (IPCC) Climate Change 2013: The Physical Science Basis. Pre-register Today To be notified when the Second Order Draft of the Working Group III contribution to the Intergovernmental Panel on Climate Change's 5th Assessment report is available for review, please click here. On behalf of the U.S. Department of State, the U.S. Global Change Research Program is coordinating the submission of comments by U.S. experts to inform development of an integrated set of U.S. Government comments on the report. Expert comments must be received via the internet-based application by Midnight, Eastern Daylight Time, 27 March 2013 to be considered for inclusion in the U.S. Government submission. An expert reviewer may also be asked to participate in the government review organized within his or her own country. In such a case, he/she should submit comments either as an individual or as part of the government review, but not both.

346

AR5 WGII Review  

NLE Websites -- All DOE Office Websites (Extended Search)

WGII Review Print E-mail WGII Review Print E-mail Intergovernmental Panel on Climate Change (IPCC) Fifth Assessment Report: Working Group II Introduction: The United States Global Change Research Program, in cooperation with the Department of State, request expert review of the Second Order Draft of the Working Group II Contribution to the Fifth Assessment Report of the Intergovernmental Panel on Climate Change (IPCC) Climate Change 2013: Impacts, Adaptation and Vlunerability. Pre-register Today To be notified when the Second Order Draft of the Working Group II contribution to the Intergovernmental Panel on Climate Change's 5th Assessment report is available for review, please click here. On behalf of the U.S. Department of State, the U.S. Global Change Research Program is coordinating the submission of comments by U.S. experts to inform development of an integrated set of U.S. Government comments on the report. Expert comments must be received via the internet-based application by Midnight, Eastern Daylight Time, 1 May 2013 to be considered for inclusion in the U.S. Government submission. An expert reviewer may also be asked to participate in the government review organized within his or her own country. In such a case, he/she should submit comments either as an individual or as part of the government review, but not both.

347

Peer Review Oct 2005  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Peer Review Sept , 2008 Peer Review Sept , 2008 Design, Fabrication, and Test of a 5 kWh Flywheel Energy Storage System Utilizing a High Temperature Superconducting Magnetic Bearing - Phase III Boeing Technology | Phantom Works Superconducting Flywheel Development 2 Copyright © 2004 Boeing. All rights reserved. Flywheel Energy Storage Systems Objective: *Design, build and deliver flywheel energy storage systems utilizing high temperature superconducting (HTS) bearings tailored for uninterruptible power systems and off-grid applications Goal: *Successfully integrate FESS into a demonstration site through cooperative agreements with DOE and contracts with Sandia National Labs Deployment of a demo system, shown in relation to diesel genset and balance of system. Over All Status:

348

Examining Uncertainty in Demand Response Baseline Models and Variability in Automated Response to Dynamic Pricing  

Science Conference Proceedings (OSTI)

Controlling electric loads to deliver power system services presents a number of interesting challenges. For example, changes in electricity consumption of Commercial and Industrial (C&I) facilities are usually estimated using counterfactual baseline models, and model uncertainty makes it difficult to precisely quantify control responsiveness. Moreover, C&I facilities exhibit variability in their response. This paper seeks to understand baseline model error and demand-side variability in responses to open-loop control signals (i.e. dynamic prices). Using a regression-based baseline model, we define several Demand Response (DR) parameters, which characterize changes in electricity use on DR days, and then present a method for computing the error associated with DR parameter estimates. In addition to analyzing the magnitude of DR parameter error, we develop a metric to determine how much observed DR parameter variability is attributable to real event-to-event variability versus simply baseline model error. Using data from 38 C&I facilities that participated in an automated DR program in California, we find that DR parameter errors are large. For most facilities, observed DR parameter variability is likely explained by baseline model error, not real DR parameter variability; however, a number of facilities exhibit real DR parameter variability. In some cases, the aggregate population of C&I facilities exhibits real DR parameter variability, resulting in implications for the system operator with respect to both resource planning and system stability.

Mathieu, Johanna L.; Callaway, Duncan S.; Kiliccote, Sila

2011-08-15T23:59:59.000Z

349

Role of Smarter Grids in Variable Renewable Resource Integration (Presentation)  

Science Conference Proceedings (OSTI)

This presentation discusses the role of smarter grids in variable renewable resource integration and references material from a forthcoming ISGAN issue paper: Smart Grid Contributions to Variable Renewable Resource Integration, co-written by the presenter and currently in review.

Miller, M.

2012-07-01T23:59:59.000Z

350

Book Reviews  

Science Conference Proceedings (OSTI)

In Book Reviews, we review an extensive and diverse range of books. They cover theory and applications in operations research, statistics, management science, econometrics, mathematics, computers, and information systems. In addition, we include ...

Benjamin Lev

2007-09-01T23:59:59.000Z

351

Book Reviews  

Science Conference Proceedings (OSTI)

In Book Reviews, we review an extensive and diverse range of books. They cover theory and applications in operations research, statistics, management science, econometrics, mathematics, computers, and information systems. In addition, we include ...

Graham K. Rand

2013-01-01T23:59:59.000Z

352

Book Reviews  

Science Conference Proceedings (OSTI)

In Book Reviews, we review an extensive and diverse range of books. They cover theory and applications in operations research, statistics, management science, econometrics, mathematics, computers, and information systems. In addition, we include ...

Graham K. Rand

2013-03-01T23:59:59.000Z

353

NREL: Energy Systems Integration - Energy Systems Integration...  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Systems Integration Facility NREL's Energy Systems Integration Facility Garners LEED Platinum View the NREL Press Release. NREL's multistory Energy Systems Integration...

354

NREL: Energy Systems Integration - Integrated Deployment Workshop  

NLE Websites -- All DOE Office Websites (Extended Search)

Integrated Deployment Workshop Integrated Deployment Workshop The Energy Systems Integration Facility workshop, Integrated Deployment, was held August 21 - 23, 2012 at the National Renewable Energy Laboratory in Golden, Colorado. Each day of the workshop, which included a tour of the Energy Systems Integration Facility, focused on a different topic: Day 1: Utility-Scale Renewable Integration Day 2: Distribution-Level Integration Day 3: Isolated and Islanded Grid Systems The agenda and presentations from the workshop are below. Agenda Energy Systems Integration Facility Overview ESIF Technology Partnerships Integrated Deployment Model Integrated Deployment and the Energy Systems Integration Facility: Workshop Proceedings Printable Version Energy Systems Integration Home Research & Development

355

Book Review  

E-Print Network (OSTI)

Work Transformed Our Own Rebecca Fowler Bridging: How Gloriaagain and again (203). Fowler| Book Review: Bridging: How

Fowler, Rebecca

2013-01-01T23:59:59.000Z

356

Baseline Case  

Science Conference Proceedings (OSTI)

... steel pressure-jet; Hollow-cone spray; Nominal 60 degree spray angle. Operating Conditions: Fuel: Fuel type - methanol (reaction ...

2013-07-15T23:59:59.000Z

357

Experimental Parameters for a Reactor Antineutrino Experiment at Very Short Baselines  

E-Print Network (OSTI)

Reactor antineutrinos are used to study neutrino oscillation, search for signatures of non-standard neutrino interactions, and to monitor reactor operation for safeguard applications. The flux and energy spectrum of reactor antineutrinos can be predicted from the decays of the nuclear fission products. A comparison of recent reactor calculations with past measurements at baselines of 10-100m suggests a 5.7% deficit. Precision measurements of reactor antineutrinos at very short baselines O(1-10 m) can be used to probe this anomaly and search for possible oscillations into sterile neutrino species. This paper studies the experimental requirements for a new reactor antineutrino measurement at very short baselines and calculates the sensitivity of various scenarios. We conclude that an experiment at a typical research reactor provides 5{\\sigma} discovery potential for the favored oscillation parameter space with 3 years of data collection.

K. M. Heeger; B. R. Littlejohn; H. P. Mumm; M. N. Tobin

2012-12-10T23:59:59.000Z

358

Estimation and Analysis of Life Cycle Costs of Baseline Enhanced Geothermal  

Open Energy Info (EERE)

Estimation and Analysis of Life Cycle Costs of Baseline Enhanced Geothermal Estimation and Analysis of Life Cycle Costs of Baseline Enhanced Geothermal Systems Geothermal Project Jump to: navigation, search Last modified on July 22, 2011. Project Title Estimation and Analysis of Life Cycle Costs of Baseline Enhanced Geothermal Systems Project Type / Topic 1 Recovery Act: Enhanced Geothermal Systems Component Research and Development/Analysis Project Type / Topic 2 Geothermal Analysis Project Description In pursuit of the goal of reducing EGS costs, this project will facilitate the following: - A clear understanding of the current cost structure - Its dependence on markets - The benefits of innovation - The impact of synergistic process configurations, and - Widespread dissemination of the findings for use by the geothermal community

359

The DOE Hydrogen Baseline Survey: Assessing Knowledge and Opinions about Hydrogen Technology  

NLE Websites -- All DOE Office Websites (Extended Search)

Hydrogen Baseline Survey: Hydrogen Baseline Survey: Assessing Knowledge and Opinions about Hydrogen Technology Christy Cooper U.S. Department of Energy Hydrogen Program Overview Purpose: To learn what people know and don't know about the hydrogen economy and hydrogen technologies. The data will - Guide education program development and activities Provide a quantifiable baseline from which to measure changes in knowledge of and opinions about hydrogen technologies over time Target Audiences: General Public Students State and Local Government Officials Potential Large-Scale End Users *Target audience categories were selected based on input from the Hydrogen Education kick-off workshop held December 2002 and the National Hydrogen Energy Roadmap Overview Project Team ORNL → Tykey Truett, PI

360

integr~1  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

7 7 AUDIT REPORT THE U.S. DEPARTMENT OF ENERGY' S MANAGEMENT OF RESEARCH AND DEVELOPMENT INTEGRATION MARCH 1998 U.S. DEPARTMENT OF ENERGY OFFICE OF INSPECTOR GENERAL OFFICE OF AUDIT SERVICES DEPARTMENT OF ENERGY Washington, DC 20585 MEMORANDUM FOR THE SECRETARY FROM: Gregory H. Friedman Principal Deputy Inspector General SUBJECT: INFORMATION : Audit Report on "Audit of the Department of Energy's Management of Research and Development Integration" BACKGROUND The Congress, independent task forces, and advisory groups have pointed out the need for the Department to improve its integration of research and development (R&D) projects. In the past, R&D management was carried out by different program offices with the research being

Note: This page contains sample records for the topic "integrated baseline review" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Baseline design/economics for advanced Fischer-Tropsch technology. Quarterly report, July--September 1994  

DOE Green Energy (OSTI)

This report is Bechtel`s twelfth quarterly technical progress report and covers the period of July through September, 1994. All major tasks associated with the contract study have essentially been completed. Effort is under way in preparing various topical reports for publication. The objectives of this study are to: Develop a baseline design and two alternative designs for indirect liquefaction using advanced F-T technology. The baseline design uses Illinois No. 6 Eastern Coal and conventional refining. There is an alternative refining case using ZSM-5 treatment of the vapor stream from the slurry F-T reactor and an alternative coal case using Western coal from the Powder River Basin. Prepare the capital and operating costs for the baseline design and the alternatives. Individual plant costs for the alternative cases win be prorated on capacity, wherever possible, from the baseline case. Develop a process flowsheet simulation (PFS) model; establish the baseline design and alternatives; evaluate baseline and alternative economics; develop engineering design criteria; develop a process flowsheet simulation (PFS) model; perform sensitivity studies using the PFS model; document the PFS model and develop a DOE training session on its use; and perform project management, technical coordination and other miscellaneous support functions. Tasks 1, 2, 3 and 5 have essentially been completed. Effort is under way in preparing topical reports for publication. During the current reporting period, work progressed on Tasks 4, 6 and 7. This report covers work done during this period and consists of four sections: Introduction and Summary; Task 4 - Process Flowsheet Simulation (PFS) Model and Conversion to ASPEN PLUS; Task 6 - Document the PFS model and develop a DOE training session on its use; and Project Management and Staffing Report.

NONE

1994-12-31T23:59:59.000Z

362

Microsoft PowerPoint - FinalModule7.ppt  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

7: Integrated Baseline Review 7: Integrated Baseline Review and Change Control Prepared by: Module 7 - Integrated Baseline Review and Change Control 1 Prepared by: Booz Allen Hamilton Module 7: Integrated Baseline Review and Change Control Welcome to Module 7. The objective of this module is to introduce you to the concepts of the Integrated Baseline Review Process and requirements for Change Control. The Topics that will be addressed in this Module include: * Definition of an Integrated Baseline Review (IBR) * Integrated Baseline Review Objectives and Responsibilities * Change Control Process Module 7 - Integrated Baseline Review and Change Control 2 Prepared by: Booz Allen Hamilton Review of Previous Modules To review some critical terminology and define the framework within which IBRs are conducted, let's look back at the previous six modules.

363

Baseline Report for the Fort Hood Army Base: Sept. 1, 2002 - Aug. 31, 2003  

E-Print Network (OSTI)

This report presents electricity, natural gas and cooling baselines for the thermal plant, buildings located in the 87000 block, III Corp building and other buildings that were determined to be part of the ESPC project at Ft. Hood. A baseline analysis is also presented for the natural gas consumption for the Ft. Hood Army base. The weather-independent analysis, which utilizes 24-hour profiles that were developed using ASHRAE??s 1093-RP diversity factor procedures are presented for data obtained from portable loggers attached to Watt-hour meters in selected buildings as well as data from the Main, West and North Substations.

Haberl, J. S.; Baltazar-Cervantes, J. C.; Liu, Z.; Claridge, D. E.; Turner, W. D.

2003-01-01T23:59:59.000Z

364

Integrated System  

NLE Websites -- All DOE Office Websites (Extended Search)

Integrated Window System Our research activities in the field of high performance windows have led us to conclude that even by using high performance insulating glass units, low conductivity frames, and warm edge spacers, there are still untapped sources for improving energy efficiency in the design and use of residential windows. While such high performance windows are a dramatic improvement over conventional units, they do not reduce conductive losses through wall framing around the window, offer guarantees against excessive wall/window infiltration nor do they adapt to the daily and seasonal potentials for night insulation and summer shading. To meet this need, we have been working on the design, development, and prototyping of Integrated Window Systems (IWS) since 1993. Integrated Window Systems are a form of panelized construction where the wall panel includes an operable or fixed window sash, recessed night insulation, integral solar shading, and is built in a factory setting in order to minimize thermal short circuits and infiltration at joints. IWSs can be built in modular lengths to facilitate their installation with conventional wood frame stick construction or other forms of panelized construction.

365

Independent technical review, handbook  

SciTech Connect

Purpose Provide an independent engineering review of the major projects being funded by the Department of Energy, Office of Environmental Restoration and Waste Management. The independent engineering review will address questions of whether the engineering practice is sufficiently developed to a point where a major project can be executed without significant technical problems. The independent review will focus on questions related to: (1) Adequacy of development of the technical base of understanding; (2) Status of development and availability of technology among the various alternatives; (3) Status and availability of the industrial infrastructure to support project design, equipment fabrication, facility construction, and process and program/project operation; (4) Adequacy of the design effort to provide a sound foundation to support execution of project; (5) Ability of the organization to fully integrate the system, and direct, manage, and control the execution of a complex major project.

Not Available

1994-02-01T23:59:59.000Z

366

Integration of High-Temperature Gas-Cooled Reactors into Industrial Process Applications  

Science Conference Proceedings (OSTI)

This report is a summary of analyses performed by the NGNP project to determine whether it is technically and economically feasible to integrate high temperature gas cooled reactor (HTGR) technology into industrial processes. To avoid an overly optimistic environmental and economic baseline for comparing nuclear integrated and conventional processes, a conservative approach was used for the assumptions and calculations.

Lee Nelson

2011-09-01T23:59:59.000Z

367

Microsoft Word - PeerReview_SAR.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

a Peer Review of a "Synthesis and Assessment Report on a Peer Review of a "Synthesis and Assessment Report on Scenarios of Greenhouse Gas Emissions and Atmospheric Concentrations and Review of Integrated Scenario Development and Application" Pursuant to Section V of the "Information Quality Bulletin for Peer Review" of the Office of Management and Budget (OMB), under the authority of the Information Quality Act of 2000 (P.L. 106-554), the U.S. Climate Change Science Program (CCSP) announces a plan for a peer review of its Synthesis and Assessment Report 2.1 entitled "Scenarios of Greenhouse Gas Emissions and Atmospheric Concentrations and Review of Integrated Scenario Development and Application" The CCSP (see http://www.climatescience.gov for details) integrates federal

368

ORISE: Scientific Peer Review Planning  

NLE Websites -- All DOE Office Websites (Extended Search)

Planning Planning Woman participating in a peer review The Oak Ridge Institute for Science and Education (ORISE) begins the peer review planning process by analyzing the purpose of the funds to be distributed. Because each agency's needs are different, ORISE then designs and manages a flexible, scientific peer review process that can be modified based on a sponsor's regulatory, policy and operational requirements. ORISE's existing tools and systems, and knowledge of reviewing proposals from a government agency perspective, are helping to promote the quality and credibility of scientific information and funded research. ORISE's peer review planning process ensures each objective review is completed on schedule, within budget and with a high degree of process integrity.

369

Baseline Configuration of the Cryogenic System for the International Linear Collider  

SciTech Connect

The paper discusses the main constraints and boundary conditions and describes the baseline configuration of the International Linear Collider (ILC) cryogenic system. The cryogenic layout, architecture and the cooling principle are presented. The paper addresses a plan for study and development required to demonstrate and improve the performance, to reduce cost and to attain the desired reliability.

Casas-Cubillos, J.; Claudet, S.; Parma, V.; Riddone, G.; Serio, L.; Tavian, L.; Vullierme, B.; van Weelderen, R.; /CERN; Chorowski, M.; /Wroclaw Tech. U.; Ganni, R.; Rode, C.; /Jefferson Lab; Klebaner, A.; Peterson, T.; Theilacker, J.; /Fermilab; Rousset, B.; /Grenoble, CEN; Weisend, J.; /SLAC

2007-06-18T23:59:59.000Z

370

Waste Isolation Pilot Plant Transuranic Waste Baseline inventory report. Volume 2. Revision 1  

SciTech Connect

This document is the Baseline Inventory Report for the transuranic (alpha-bearing) wastes stored at the Waste Isolation Pilot Plant (WIPP) in New Mexico. Waste stream profiles including origin, applicable EPA codes, typical isotopic composition, typical waste densities, and typical rates of waste generation for each facility are presented for wastes stored at the WIPP.

1995-02-01T23:59:59.000Z

371

Sandia National Laboratories/New Mexico Environmental Baseline update--Revision 1.0  

Science Conference Proceedings (OSTI)

This report provides a baseline update to provide the background information necessary for personnel to prepare clear and consise NEPA documentation. The environment of the Sandia National Laboratories is described in this document, including the ecology, meteorology, climatology, seismology, emissions, cultural resources and land use, visual resources, noise pollution, transportation, and socioeconomics.

NONE

1996-07-01T23:59:59.000Z

372

The GOES-R Advanced Baseline Imager and the Continuation of Current Sounder Products  

Science Conference Proceedings (OSTI)

The first of the next-generation series of Geostationary Operational Environmental Satellites (GOES-R) is scheduled for launch in the 2015 time frame. One of the primary instruments on GOES-R, the Advanced Baseline Imager (ABI), will offer more ...

Timothy J. Schmit; Jun Li; Jinlong Li; Wayne F. Feltz; James J. Gurka; Mitchell D. Goldberg; Kevin J. Schrab

2008-10-01T23:59:59.000Z

373

The Palo Verde Reactor Neutrino Experiment A Test for Long Baseline Neutrino Oscillations  

E-Print Network (OSTI)

:1. Our range of sensitivity is tuned to test the š¯ $ še solution of the atmospheric neutrino anomaly. 11 The Palo Verde Reactor Neutrino Experiment A Test for Long Baseline Neutrino Oscillations 94305 e Palo Verde Nuclear Generating Station,Tonopah AZ 85354 Our collaboration has installed a long

Piepke, Andreas G.

374

The Palo Verde Reactor Neutrino Experiment A Test for Long Baseline Neutrino Oscillations  

E-Print Network (OSTI)

\\Gamma3 eV 2 and sin 2 2\\Theta ! 0:1. Our range of sensitivity is tuned to test the š ¯ $ š e solutionThe Palo Verde Reactor Neutrino Experiment A Test for Long Baseline Neutrino Oscillations Presented 85287 S. Pittalwala, R. Wilferd, S. Young Palo Verde Nuclear Generating Station, Tonopah AZ 85354 Our

Piepke, Andreas G.

375

Baseline design/economics for advanced Fischer-Tropsch technology. Quarterly report, April--June 1992  

Science Conference Proceedings (OSTI)

Effective September 26, 1991, Bechtel, with Amoco as the main subcontractor, initiated a study to develop a computer model and baseline design for advanced Fischer-Tropsch (F-T) technology for the US Department of Energy`s Pittsburgh Energy Technology Center (PETC). The objectives of the study are to: Develop a baseline design for indirect liquefaction using advanced F-T technology; prepare the capital and operating costs for the baseline design; and develop a process flow sheet simulation (PI-S) model. The baseline design, the economic analysis, and the computer model win be the major research planning tools that PETC will use to plan, guide, and evaluate its ongoing and future research and commercialization programs relating to indirect coal liquefaction. for the manufacture of synthetic liquid fuels from coal. This report is Bechtel`s third quarterly technical progress report covering the period from March 16, 1992 through June 21, 1992. This report consists of seven sections: Section 1 - introduction; Section 2 - summary; Section 3 - carbon dioxide removal tradeoff study; Section 4 - preliminary plant designs for coal preparation; Section 5 - preliminary design for syngas production; Section 6 - Task 3 - engineering design criteria; and Section 7 - project management.

Not Available

1992-10-01T23:59:59.000Z

376

Tank waste remediation system retrieval and disposal mission initial updated baseline summary  

Science Conference Proceedings (OSTI)

This document provides a summary of the proposed Tank Waste Remediation System Retrieval and Disposal Mission Initial Updated Baseline (scope, schedule, and cost) developed to demonstrate the Tank Waste Remediation System contractor`s Readiness-to-Proceed in support of the Phase 1B mission.

Swita, W.R.

1998-01-05T23:59:59.000Z

377

Low-power bitstream-residual decoder for H.264/AVC baseline profile decoding  

Science Conference Proceedings (OSTI)

We present the design and VLSI implementation of a novel low-power bitstream-residual decoder for H.264/AVC baseline profile. It comprises a syntax parser, a parameter decoder, and an Inverse Quantization Inverse Transform (IQIT) decoder. The syntax ...

Ke Xu; Chiu-Sing Choy

2009-01-01T23:59:59.000Z

378

LongBaseline Neutrino Physics and Astrophysics Institute for Nuclear Theory Summer Program 2010  

E-Print Network (OSTI)

LongBaseline Neutrino Physics and Astrophysics Institute for Nuclear Theory Summer Program 2010 for Nuclear Theory Summer Program 2010 Robert J. Wilson 8/11/2010Page 2 Wednesday August 11th Session 6 PWG C520 14:00 Solar, Geo, and Reactor Neutrinos N. Tolich (Washington) 14:30 Q&A Guests/PWG Session 8

Washington at Seattle, University of - Department of Physics, Electroweak Interaction Research Group

379

Opportunities for the Precision Study of Reactor Antineutrinos at Very Short Baselines at US Research Reactors  

E-Print Network (OSTI)

: pieter.mumm@nist.gov #12;2 past reactor experiments HFIR, ORNL NBSR, NIST ATR, INL available baselines at US research reactors 3 neutrino fit 3+1 neutrino fit Tuesday, August 7, 12 NIST ILL HFIR ATR SONGSNIST ILL HFIR ATR SONGS 10. 100 1000 core size reactor power reactorpower(MWth) 1meter ILL HFIR NBSR

380

Baseline Risk Assessment for the F-Area Burning/Rubble Pits and Rubble Pit  

SciTech Connect

This document provides an overview of the Savannah River Site (SRS) and a description of the F-Area Burning/Rubble Pits (BRPs) and Rubble Pit (RP) unit. It also describes the objectives and scope of the baseline risk assessment (BRA).

Palmer, E. [Westinghouse Savannah River Company, AIKEN, SC (United States)

1996-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "integrated baseline review" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Reviewer Instructions:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Reviewer Instructions: Reviewer Instructions: 1. All review comments to be provided electronically using this review form. 2. Focus the review on substantive issues within your disciplinary, regulatory, or policy area. 3. Look only at the portions relevant to your agency and the land under your management. The individual land management agencies will be amending land use plans or issuing a Record of Decision, so please don't alter the other agencies' roles and responsibilities. 4. Target the review on the adequacy and reasonableness of text and analyses within your disciplinary, regulatory, or policy area. Please be aware that this is a programmatic EIS. 5. All comments should be as specific as possible. Comments such as "text unclear" or "expand" do not provide sufficient

382

EPRI Integrated Dose Reduction Program Pilot Study  

Science Conference Proceedings (OSTI)

The Integrated Dose Reduction (IDR) project is an integral part of EPRI's support to nuclear plant radiation protection programs. The broad objective of the IDR program is to review existing and recent industry developments and provide utilities with an integrated plan for EPRI's assistance based on a plant's specific needs. This document describes a pilot test of this product at a host site, and identifies areas where EPRI's RP assessments and technical assistance can support key plant programs.

2003-11-21T23:59:59.000Z

383

Independent Oversight Review, Lawrence Livermore National Laboratory -  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Lawrence Livermore National Lawrence Livermore National Laboratory - September 2011 Independent Oversight Review, Lawrence Livermore National Laboratory - September 2011 September 2011 Review of Integrated Safety Management System Effectiveness at Lawrence Livermore National Laboratory The purpose of this review was to assess the effectiveness of the integrated safety management system (ISMS) established and implemented by Lawrence Livermore National Laboratory (LLNL). Independent Oversight Review, Lawrence Livermore National Laboratory - September 2011 More Documents & Publications Independent Oversight Inspection of Environment, Safety, and Health Management at the Lawrence Livermore National Laboratory, Technical Appendices, Volume II, December 2004 Independent Oversight Inspection, Lawrence Livermore National Laboratory,

384

Estimating Demand Response Load Impacts: Evaluation of Baseline Load Models for Non-Residential Buildings in California  

E-Print Network (OSTI)

Protocols for Demand Response Load Impacts Estimates,Potter 2006. The Demand ResponseBaseline,v.1.75. Assessment of Demand Response and Advanced Metering,

Coughlin, Katie; Piette, Mary Ann; Goldman, Charles; Kiliccote, Sila

2008-01-01T23:59:59.000Z

385

Long-Baseline Neutrino Experiment (LBNE)Conceptual Design ReportThe LBNE Water Cherenkov DetectorApril 13 2012  

Science Conference Proceedings (OSTI)

Conceptual Design Report (CDR) developed for the Water Cherekov Detector (WCD) option for the far detector of the Long Baseline Neutrino Experiment (LBNE)

Kettell S. H.; Bishai, M.; Brown, R.; Chen, H.; Diwan, M.; Dolph, J., Geronimo, G.; Gill, R.; Hackenburg, R.; Hahn, R.; Hans, S.; Isvan, Z.; Jaffe, D.; Junnarkar, S.; Kettell, S.H.; Lanni,F.; Li, Y.; Ling, J.; Littenberg, L.; Makowiecki, D.; Marciano, W.; Morse, W.; Parsa, Z.; Radeka, V.; Rescia, S.; Samios, N.; Sharma, R.; Simos, N.; Sondericker, J.; Stewart, J.; Tanaka, H.; Themann, H.; Thorn, C.; Viren, B., White, S.; Worcester, E.; Yeh, M.; Yu, B.; Zhang, C.

2012-04-13T23:59:59.000Z

386

2013 Transmission Reliability Program Peer Review | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Transmission Reliability Program Peer Review Transmission Reliability Program Peer Review 2013 Transmission Reliability Program Peer Review The Transmission Reliability Program Peer Review included six sessions over 2 days on June 27 - 28, 2013. Presentations are available through the individual session links. The agenda and introduction by Joe Eto, LBNL, are available below. Day 1: June 27 Session I Baselining Studies and Analysis, Bharat Bhargava, EPG Baselining Studies and Analysis, Brett Amidan, PNNL Synchrophasor Standards Support and Development, Ken Martin, EPG Session II Advanced Synchrophasor Metrology, Stan Hadley, ORNL GPS Issue Management, Mark Buckner, ORNL Technology Assessment for Next Generation PMU, Mark Buckner, ORNL Session III Measurement-Based Stability Assessment, Dan Trudnowski, U. Montana

387

Quality Assurance for Critical Decision Reviews RM  

Energy.gov (U.S. Department of Energy (DOE))

The purpose of this Quality Assurance for Capital Project Critical Decision Review Module (QARM) is to identify, integrate, and clarify the QA performance objectives, criteria, and guidance needed...

388

The 2010 Interim Report of the Long-Baseline Neutrino Experiment Collaboration Physics Working Groups  

E-Print Network (OSTI)

In early 2010, the Long-Baseline Neutrino Experiment (LBNE) science collaboration initiated a study to investigate the physics potential of the experiment with a broad set of different beam, near- and far-detector configurations. Nine initial topics were identified as scientific areas that motivate construction of a long-baseline neutrino experiment with a very large far detector. We summarize the scientific justification for each topic and the estimated performance for a set of far detector reference configurations. We report also on a study of optimized beam parameters and the physics capability of proposed Near Detector configurations. This document was presented to the collaboration in fall 2010 and updated with minor modifications in early 2011.

The LBNE Collaboration; T. Akiri; D. Allspach; M. Andrews; K. Arisaka; E. Arrieta-Diaz; M. Artuso; X. Bai; B. Balantekin; B. Baller; W. Barletta; G. Barr; M. Bass; A. Beck; B. Becker; V. Bellini; O. Benhar; B. Berger; M. Bergevin; E. Berman; H. Berns; A. Bernstein; F. Beroz; V. Bhatnagar; B. Bhuyan; R. Bionta; M. Bishai; A. Blake; E. Blaufuss; B. Bleakley; E. Blucher; S. Blusk; D. Boehnlein; T. Bolton; J. Brack; R. Bradford; R. Breedon; C. Bromberg; R. Brown; N. Buchanan; L. Camilleri; M. Campbell; R. Carr; G. Carminati; A. Chen; H. Chen; D. Cherdack; C. Chi; S. Childress; B. Choudhary; E. Church; D. Cline; S. Coleman; R. Corey; M. D'Agostino; G. Davies; S. Dazeley; J. De Jong; B. DeMaat; D. Demuth; A. Dighe; Z. Djurcic; J. Dolph; G. Drake; A. Drozhdin; H. Duan; H. Duyang; S. Dye; T. Dykhuis; D. Edmunds; S. Elliott; S. Enomoto; C. Escobar; J. Felde; F. Feyzi; B. Fleming; J. Fowler; W. Fox; A. Friedland; B. Fujikawa; H. Gallagher; G. Garilli; G. Garvey; V. Gehman; G. Geronimo; R. Gill; M. Goodman; J. Goon; D. Gorbunov; R. Gran; V. Guarino; E. Guarnaccia; R. Guenette; P. Gupta; A. Habig; R. Hackenberg; A. Hahn; R. Hahn; T. Haines; S. Hans; J. Harton; S. Hays; E. Hazen; Q. He; A. Heavey; K. Heeger; R. Hellauer; A. Himmel; G. Horton-Smith; J. Howell; P. Huber; P. Hurh; J. Huston; J. Hylen; J. Insler; D. Jaffe; C. James; C. Johnson; M. Johnson; R. Johnson; W. Johnson; W. Johnston; J. Johnstone; B. Jones; H. Jostlein; T. Junk; S. Junnarkar; R. Kadel; T. Kafka; D. Kaminski; G. Karagiorgi; A. Karle; J. Kaspar; T. Katori; B. Kayser; E. Kearns; S. Kettell; F. Khanam; J. Klein; J. Kneller; G. Koizumi; J. Kopp; S. Kopp; W. Kropp; V. Kudryavtsev; A. Kumar; J. Kumar; T. Kutter; T. Lackowski; K. Lande; C. Lane; K. Lang; F. Lanni; R. Lanza; T. Latorre; J. Learned; D. Lee; K. Lee; Y. Li; S. Linden; J. Ling; J. Link; L. Littenberg; L. Loiacono; T. Liu; J. Losecco; W. Louis; P. Lucas; C. Lunardini; B. Lundberg; T. Lundin; D. Makowiecki; S. Malys; S. Mandal; A. Mann; A. Mann; P. Mantsch; W. Marciano; C. Mariani; J. Maricic; A. Marino; M. Marshak; R. Maruyama; J. Mathews; S. Matsuno; C. Mauger; E. McCluskey; K. McDonald; K. McFarland; R. McKeown; R. McTaggart; R. Mehdiyev; W. Melnitchouk; Y. Meng; B. Mercurio; M. Messier; W. Metcalf; R. Milincic; W. Miller; G. Mills; S. Mishra; S. MoedSher; D. Mohapatra; N. Mokhov; C. Moore; J. Morfin; W. Morse; A. Moss; S. Mufson; J. Musser; D. Naples; J. Napolitano; M. Newcomer; B. Norris; S. Ouedraogo; B. Page; S. Pakvasa; J. Paley; V. Paolone; V. Papadimitriou; Z. Parsa; K. Partyka; Z. Pavlovic; C. Pearson; S. Perasso; R. Petti; R. Plunkett; C. Polly; S. Pordes; R. Potenza; A. Prakash; O. Prokofiev; X. Qian; J. Raaf; V. Radeka; R. Raghavan; R. Rameika; B. Rebel; S. Rescia; D. Reitzner; M. Richardson; K. Riesselman; M. Robinson; M. Rosen; C. Rosenfeld; R. Rucinski; T. Russo; S. Sahijpal; S. Salon; N. Samios; M. Sanchez; R. Schmitt; D. Schmitz; J. Schneps; K. Scholberg; S. Seibert; F. Sergiampietri; M. Shaevitz; P. Shanahan; M. Shaposhnikov; R. Sharma; N. Simos; V. Singh; G. Sinnis; W. Sippach; T. Skwarnicki; M. Smy; H. Sobel; M. Soderberg; J. Sondericker; W. Sondheim; J. Spitz; N. Spooner; M. Stancari; I. Stancu; J. Stewart; P. Stoler; J. Stone; S. Stone; J. Strait; T. Straszheim; S. Striganov; G. Sullivan; R. Svoboda; B. Szczerbinska; A. Szelc; R. Talaga; H. Tanaka; R. Tayloe; D. Taylor; J. Thomas; L. Thompson; M. Thomson; C. Thorn; X. Tian; W. Toki; N. Tolich; M. Tripathi; M. Trovato; H. Tseung; M. Tzanov; J. Urheim; S. Usman; M. Vagins; R. Van Berg; R. Van de Water; G. Varner; K. Vaziri; G. Velev; B. Viren; T. Wachala; C. Walter; H. Wang; Z. Wang; D. Warner; D. Webber; A. Weber; R. Wendell; C. Wendt; M. Wetstein; H. White; S. White; L. Whitehead; W. Willis; R. J. Wilson; L. Winslow; J. Ye; M. Yeh; B. Yu; G. Zeller; C. Zhang; E. Zimmerman; R. Zwaska

2011-10-27T23:59:59.000Z

389

Special Issue On Estimation Of Baselines And Leakage In CarbonMitigation Forestry Projects  

SciTech Connect

There is a growing acceptance that the environmentalbenefits of forests extend beyond traditional ecological benefits andinclude the mitigation of climate change. Interest in forestry mitigationactivities has led to the inclusion of forestry practices at the projectlevel in international agreements. Climate change activities place newdemands on participating institutions to set baselines, establishadditionality, determine leakage, ensure permanence, and monitor andverify a project's greenhouse gas benefits. These issues are common toboth forestry and other types of mitigation projects. They demandempirical evidence to establish conditions under which such projects canprovide sustained long term global benefits. This Special Issue reportson papers that experiment with a range of approaches based on empiricalevidence for the setting of baselines and estimation of leakage inprojects in developing Asia and Latin America.

Sathaye, Jayant A.; Andrasko, Kenneth

2006-06-01T23:59:59.000Z

390

LEDSGP/Transportation Toolkit/Key Actions/Create a Baseline | Open Energy  

Open Energy Info (EERE)

LEDSGP/Transportation Toolkit/Key Actions/Create a Baseline LEDSGP/Transportation Toolkit/Key Actions/Create a Baseline < LEDSGP‎ | Transportation Toolkit‎ | Key Actions Jump to: navigation, search LEDSGP Logo.png Transportation Toolkit Home Tools Training Contacts Key Actions for Low-Emission Development in Transportation Although no single approach or fixed process exists for low-emission development strategies (LEDS), the following key actions are necessary steps for implementing LEDS in the transportation sector. Undertaking these actions requires flexibility to adapt to dynamic societal conditions in a way that complements existing climate and development goals in other sectors. Planners, researchers, and decision-makers should customize this LEDS implementation framework for the specific conditions of their transport

391

LEDSGP/Transportation Toolkit/Key Actions/Create a Baseline | Open Energy  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » LEDSGP/Transportation Toolkit/Key Actions/Create a Baseline < LEDSGP‎ | Transportation Toolkit‎ | Key Actions(Redirected from Transportation Toolkit/Key Actions/Create a Baseline) Jump to: navigation, search LEDSGP Logo.png Transportation Toolkit Home Tools Training Contacts Key Actions for Low-Emission Development in Transportation Although no single approach or fixed process exists for low emission development strategies (LEDS), the following key actions are necessary steps for implementing LEDS in the transportation sector. Undertaking these actions requires flexibility to adapt to dynamic societal conditions in a

392

Determination of Baselines for Evaluation and Promotion of Energy Efficiency in Wastewater Treatment Facilities  

E-Print Network (OSTI)

Wastewater treatment plants are one of the largest energy consumers managed by the public sector. As plants expand in the future to accommodate population growth, energy requirements will substantially increase. Thus, implementation of energy efficient technologies is crucial in reducing national energy consumption. A detailed understanding of the current industry standards (baselines) is needed to estimate the energy savings potential for advanced state-of-the-art technologies and to provide incentives for application of the new technologies in retrofit and new construction projects. This paper summarizes the process BASE Energy, Inc. (BASE) went through to establish baselines to compare the energy performance of potential energy efficient technologies in the wastewater treatment industry that can be applied to energy efficiency programs available for wastewater treatment plants.

Chow, S. A.; Ganji, A. R.; Fok, S.

2009-05-01T23:59:59.000Z

393

"What's Going On Out There?" A Baseline Survey for the LCRA's Good Cents Home Program  

E-Print Network (OSTI)

The question, What constitutes your baseline?" always challenges Demand-Side Management program staff. This study answers that question for the Lower Colorado River Authority's Good Cents Home Program. The Lower Colorado River Authority (LCRA) has based its engineering estimates of program savings on baseline construction practices identified in 1986. LCRA updated its survey in 1993, and this study details the project's findings and methodology. LCRA learned that it has two distinct markets. One, greater Austin, has a high level of efficiency, driven by the City of Austin's energy code and energy-efficient new home program, E-Star. The other is Central Texas, with lower thermal and equipment was lower. The study employed site surveys of houses under construction, computer simulation of building shells and equipment operation, and statistical analysis of data. New savings calculations have put the program on a more conservative and reliable footing as a result of the findings.

Knutsen, T.

1994-01-01T23:59:59.000Z

394

Determination of the mass hierarchy with medium-baseline reactor-neutrino experiments  

E-Print Network (OSTI)

I discuss the sensitivity of future medium baseline reactor antineutrino experiments on the neutrino mass hierarchy. By using the standard chi^2 analysis, we find that the sensitivity depends strongly on the baseline length L and the energy resolution (delta E/E)^2 = (a/ E/MeV)^2 + b^2, where a and b parameterize the statistical and systematic uncertainties, respectively. The optimal length is found to be L ~ 40-55 km, the larger resolution the shorter optimal L. For a 5 kton detector (with 12% weight fraction of free proton) placed at L ~ 50 km away from a 20 GW_th reactor, an experiment would determine the mass hierarchy with (Delta chi^2)_min ~ 9 on average after 5 (15) or more years of running with the (a, b) = (2, 0.5)% ((3, 0.5)%) energy resolution. This type of experiment can also measure the relevant mixing parameters with the accuracy of ~ 0.5%.

Yoshitaro Takaesu

2013-04-19T23:59:59.000Z

395

The Microbase Value-Added Product: A Baseline Retrieval of Cloud Microphysical Properties  

SciTech Connect

This report describes the Atmospheric Radiation Measurement (ARM) Climate Research Facility baseline cloud microphysical properties (MICROBASE) value-added product (VAP). MICROBASE uses a combination of millimeter-wavelength cloud radar, microwave radiometer, and radiosonde observations to estimate the vertical profiles of the primary microphysical parameters of clouds including the liquid/ice water content and liquid/ice cloud particle effective radius. MICROBASE is a baseline algorithm designed to apply to most conditions and locations using a single set of parameterizations and a simple determination of water phase based on temperature. This document provides the user of this product with guidelines to assist in determining the accuracy of the product under certain conditions. Quality control flags are designed to identify outliers and indicate instances where the retrieval assumptions may not be met. The overall methodology is described in this report through a detailed description of the input variables, algorithms, and output products.

Dunn, M; Johnson, K; Jensen, M

2011-05-31T23:59:59.000Z

396

Results from baseline tests of the SPRE I and comparison with code model predictions  

DOE Green Energy (OSTI)

The Space Power Research Engine (SPRE), a free-piston Stirling engine with linear alternator, is being tested at the NASA Lewis Research Center as part of the Civil Space Technology Initiative (CSTI) as a candidate for high capacity space power. This paper presents results of base-line engine tests at design and off-design operating conditions. The test results are compared with code model predictions.

Cairelli, J.E.; Geng, S.M. [National Aeronautics and Space Administration, Cleveland, OH (United States). Lewis Research Center; Skupinski, R.C. [Sverdrup Technology, Inc., Cleveland, OH (United States). NASA Lewis Research Center Group

1994-09-01T23:59:59.000Z

397

Policy implications of the GRI Baseline Projection of US Energy Supply and Demand to 2010; 1991  

Science Conference Proceedings (OSTI)

The 1991 edition of the GRI Baseline Projection of U.S. Energy Supply and Demand is summarized. Three broad implications for the future of the natural gas industry are highlighted: the impact of the Middle East turmoil on the expected price of crude oil and the potentional for increased interfuel price competition between natural gas and petroleum in the mid-1990s if world oil prices return to lower levels.

Not Available

1990-12-01T23:59:59.000Z

398

Baseline Greenhouse Gas Emissions and Removals for Forest, Range, and Agricultural Lands in California  

Science Conference Proceedings (OSTI)

EPRI has teamed with the California Energy Commission to study the potential of terrestrial carbon sequestration market opportunities in California. The three reports in this series cover 1) the baseline of changes in carbon stocks on forest, range, and agricultural lands in California for the decade of the 1990s (1011586); 2) the quantity and cost of carbon storage opportunities for forests, rangelands, and agricultural lands in California (1005465); and 3) the relative biomass carbon storage potential ...

2005-03-21T23:59:59.000Z

399

NREL: Energy Systems Integration - Energy Systems Integration...  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Systems Integration Facility Newsroom The Energy Systems Integration Facility (ESIF) will be one of the only megawatt-scale test facilities in the United States that...

400

NREL: Transmission Grid Integration - Solar Integration National...  

NLE Websites -- All DOE Office Websites (Extended Search)

of the Western Wind and Solar Integration Study and Eastern Wind Integration and Transmission Study datasets greatly advanced the modeling of wind and solar power production...

Note: This page contains sample records for the topic "integrated baseline review" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

NREL: Transmission Grid Integration - Wind Integration Datasets  

NLE Websites -- All DOE Office Websites (Extended Search)

Wind Integration Datasets The Wind Integration Datasets provide energy professionals with a consistent set of wind profiles for the eastern United States and the western United...

402

Tank waste remediation system retrieval and disposal mission initial updated baseline summary  

SciTech Connect

This document provides a summary of the Tank Waste Remediation System (TWRS) Retrieval and Disposal Mission Initial Updated Baseline (scope, schedule, and cost), developed to demonstrate Readiness-to-Proceed (RTP) in support of the TWRS Phase 1B mission. This Updated Baseline is the proposed TWRS plan to execute and measure the mission work scope. This document and other supporting data demonstrate that the TWRS Project Hanford Management Contract (PHMC) team is prepared to fully support Phase 1B by executing the following scope, schedule, and cost baseline activities: Deliver the specified initial low-activity waste (LAW) and high-level waste (HLW) feed batches in a consistent, safe, and reliable manner to support private contractors` operations starting in June 2002; Deliver specified subsequent LAW and HLW feed batches during Phase 1B in a consistent, safe, and reliable manner; Provide for the interim storage of immobilized HLW (IHLW) products and the disposal of immobilized LAW (ILAW) products generated by the private contractors; Provide for disposal of byproduct wastes generated by the private contractors; and Provide the infrastructure to support construction and operations of the private contractors` facilities.

Swita, W.R.

1998-01-09T23:59:59.000Z

403

Baseline System Costs for 50.0 MW Enhanced Geothermal System -- A Function  

Open Energy Info (EERE)

Baseline System Costs for 50.0 MW Enhanced Geothermal System -- A Function Baseline System Costs for 50.0 MW Enhanced Geothermal System -- A Function of: Working Fluid, Technology, and Location Geothermal Project Jump to: navigation, search Last modified on July 22, 2011. Project Title Baseline System Costs for 50.0 MW Enhanced Geothermal System -- A Function of: Working Fluid, Technology, and Location Project Type / Topic 1 Recovery Act: Enhanced Geothermal Systems Component Research and Development/Analysis Project Type / Topic 2 Geothermal Analysis Project Description This effort will support the expansion of Enhanced Geothermal Systems (EGS), supporting DOE Strategic Themes of "energy security" and sub goal of "energy diversity"; reducing the Nation's dependence on foreign oil while improving our environment. A 50 MW has been chosen as a design point, so that the project may also assess how different machinery approaches will change the costing - it is a mid point in size where multiple solutions exist that will allow the team to effectively explore the options in the design space and understand the cost.

404

Book Reviews  

E-Print Network (OSTI)

community of concerned social scientists. Cricket: A Bridge of Peace by Shaharyar M. Khan, Oxford University Press, Oxford, 2005, viii, 230 pp. Reviewed by Michelle Cooksley University of Leeds Not so long ago, Test cricket was dismissed...

Thapa, Deepak

2005-01-01T23:59:59.000Z

405

Book Review  

E-Print Network (OSTI)

the chapters. However, Durable Disorder presents a good introduction to the complicated and thorny subject matter of the Northeast for the unacquainted reader. Reviewed by Susanne Kranz University of Leeds ...

Kranz, Susanne

2006-01-01T23:59:59.000Z

406

Book Reviews  

E-Print Network (OSTI)

for the remainder of the book. Hence, this mix of personalBook Reviews U rban Sprawl : Causes, Conseq uences, & Policyo choose. Therefore, this book argues that it would be both

Deng, Lan; Ronegerude, Jane; Sandoval, Gerardo

2004-01-01T23:59:59.000Z

407

Book Review  

E-Print Network (OSTI)

2:1 2013 I recommend this book to activists, organizers,like. I also rec- ommend this book to anyone who still seesBook Review: Medicine Stories: History,Culture and the

Jagernauth, Tanuja

2013-01-01T23:59:59.000Z

408

Synthesis and Comparison of Baseline Avian and Bat Use, Raptor Nesting and Mortality Information from Proposed and Existing Wind Developments: Final Report.  

DOE Green Energy (OSTI)

Primarily due to concerns generated from observed raptor mortality at the Altamont Pass (CA) wind plant, one of the first commercial electricity generating wind plants in the U.S., new proposed wind projects both within and outside of California have received a great deal of scrutiny and environmental review. A large amount of baseline and operational monitoring data have been collected at proposed and existing U.S. wind plants. The primary use of the avian baseline data collected at wind developments has been to estimate the overall project impacts (e.g., very low, low, moderate, and high relative mortality) on birds, especially raptors and sensitive species (e.g., state and federally listed species). In a few cases, these data have also been used for guiding placement of turbines within a project boundary. This new information has strengthened our ability to accurately predict and mitigate impacts from new projects. This report should assist various stakeholders in the interpretation and use of this large information source in evaluating new projects. This report also suggests that the level of baseline data (e.g., avian use data) required to adequately assess expected impacts of some projects may be reduced. This report provides an evaluation of the ability to predict direct impacts on avian resources (primarily raptors and waterfowl/waterbirds) using less than an entire year of baseline avian use data (one season, two seasons, etc.). This evaluation is important because pre-construction wildlife surveys can be one of the most time-consuming aspects of permitting wind power projects. For baseline data, this study focuses primarily on standardized avian use data usually collected using point count survey methodology and raptor nest survey data. In addition to avian use and raptor nest survey data, other baseline data is usually collected at a proposed project to further quantify potential impacts. These surveys often include vegetation mapping and state or federal sensitive-status wildlife and plant surveys if there is a likelihood of these species occurring in the vicinity of the project area. This report does not address these types of surveys, however, it is assumed in this document that those surveys are conducted when appropriate to help further quantify potential impacts. The amount and extent of ecological baseline data to collect at a wind project should be determined on a case-by-case basis. The decision should use information gained from this report, recent information from new projects (e.g., Stateline OR/WA), existing project site data from agencies and other knowledgeable groups/individuals, public scoping, and results of vegetation and habitat mapping. Other factors that should also be considered include the likelihood of the presence of sensitive species at the site and expected impacts to those species, project size and project layout.

Erickson, Wallace P.

2002-12-01T23:59:59.000Z

409

Evaluation of metrics and baselines for tracking greenhouse gas emissions trends: Recommendations for the California climate action registry  

Science Conference Proceedings (OSTI)

Executive Summary: The California Climate Action Registry, which was initially established in 2000 and began operation in Fall 2002, is a voluntary registry for recording annual greenhouse gas (GHG) emissions. The purpose of the Registry is to assist California businesses and organizations in their efforts to inventory and document emissions in order to establish a baseline and to document early actions to increase energy efficiency and decrease GHG emissions. The State of California has committed to use its ''best efforts'' to ensure that entities that establish GHG emissions baselines and register their emissions will receive ''appropriate consideration under any future international, federal, or state regulatory scheme relating to greenhouse gas emissions.'' Reporting of GHG emissions involves documentation of both ''direct'' emissions from sources that are under the entity's control and indirect emissions controlled by others. Electricity generated by an off-site power source is consider ed to be an indirect GHG emission and is required to be included in the entity's report. Registry participants include businesses, non-profit organizations, municipalities, state agencies, and other entities. Participants are required to register the GHG emissions of all operations in California, and are encouraged to report nationwide. For the first three years of participation, the Registry only requires the reporting of carbon dioxide (CO2) emissions, although participants are encouraged to report the remaining five Kyoto Protocol GHGs (CH4, N2O, HFCs, PFCs, and SF6). After three years, reporting of all six Kyoto GHG emissions is required. The enabling legislation for the Registry (SB 527) requires total GHG emissions to be registered and requires reporting of ''industry-specific metrics'' once such metrics have been adopted by the Registry. The Ernest Orlando Lawrence Berkeley National Laboratory (Berkeley Lab) was asked to provide technical assistance to the California Energy Commission (Energy Commission) related to the Registry in three areas: (1) assessing the availability and usefulness of industry-specific metrics, (2) evaluating various methods for establishing baselines for calculating GHG emissions reductions related to specific actions taken by Registry participants, and (3) establishing methods for calculating electricity CO2 emission factors. The third area of research was completed in 2002 and is documented in Estimating Carbon Dioxide Emissions Factors for the California Electric Power Sector (Marnay et al., 2002). This report documents our findings related to the first areas of research. For the first area of research, the overall objective was to evaluate the metrics, such as emissions per economic unit or emissions per unit of production that can be used to report GHG emissions trends for potential Registry participants. This research began with an effort to identify methodologies, benchmarking programs, inventories, protocols, and registries that u se industry-specific metrics to track trends in energy use or GHG emissions in order to determine what types of metrics have already been developed. The next step in developing industry-specific metrics was to assess the availability of data needed to determine metric development priorities. Berkeley Lab also determined the relative importance of different potential Registry participant categories in order to asses s the availability of sectoral or industry-specific metrics and then identified industry-specific metrics in use around the world. While a plethora of metrics was identified, no one metric that adequately tracks trends in GHG emissions while maintaining confidentiality of data was identified. As a result of this review, Berkeley Lab recommends the development of a GHG intensity index as a new metric for reporting and tracking GHG emissions trends.Such an index could provide an industry-specific metric for reporting and tracking GHG emissions trends to accurately reflect year to year changes while protecting proprietary data. This GHG intensity index changes

Price, Lynn; Murtishaw, Scott; Worrell, Ernst

2003-06-01T23:59:59.000Z

410

DOE Hydrogen and Fuel Cells Program: Systems Integration  

NLE Websites -- All DOE Office Websites (Extended Search)

Independent Reviews Independent Reviews Macro-System Model U.S. Department of Energy Search help Home > Systems Integration Printable Version Systems Integration The technological advancements and lessons learned through research, development, and demonstration of hydrogen and fuel cell technologies must be integrated to work as a fully functional system. This is the focus of systems integration-understanding the complex interactions between components, systems costs, environmental impacts, societal impacts, and system trade-offs. Identifying and analyzing these interactions will enable evaluation of alternative concepts and pathways, and result in well-integrated and optimized hydrogen and fuel cell systems. Led by the Office of Energy Efficiency and Renewable Energy, this activity

411

Peer Review Oct 2005  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE Peer Review - DOE Peer Review - Sept, 2007 Design, Fabrication, and Test of a 5 kWh Flywheel Energy Storage System Utilizing a High Temperature Superconducting Magnetic Bearing - Phase III Boeing Technology | Phantom Works Copyright © 2004 Boeing. All rights reserved. Superconducting Flywheel Development 2 Flywheel Energy Storage Systems Objective: *Design, build and deliver flywheel energy storage systems utilizing high temperature superconducting (HTS) bearings tailored for uninterruptible power systems and off-grid applications Goal: *Successfully integrate FESS into a demonstration site through cooperative agreements with DOE and contracts with Sandia National Labs Deployment of a demo system, shown in relation to diesel genset and balance of system. Status: *The 1 kWh / 3 kW test was successful

412

Annual Energy Review 2010  

SciTech Connect

This twenty-ninth edition of the Annual Energy Review (AER) presents the U.S. Energy Information Administrations (EIA) most comprehensive look at integrated energy statistics. The summary statistics on the Nations energy production, consumption, trade, stocks, and prices cover all major energy commodities and all energy-consuming sectors of the U.S. economy from 1949 through 2010. The AER is EIAs historical record of energy statistics and, because the coverage spans six decades, the statistics in this report are well-suited to long-term trend analysis.

None

2011-10-01T23:59:59.000Z

413

CONTAIN independent peer review  

SciTech Connect

The CONTAIN code was developed by Sandia National Laboratories under the sponsorship of the US Nuclear Regulatory Commission (NRC) to provide integrated analyses of containment phenomena. It is used to predict nuclear reactor containment loads, radiological source terms, and associated physical phenomena for a range of accident conditions encompassing both design-basis and severe accidents. The code`s targeted applications include support for containment-related experimental programs, light water and advanced light water reactor plant analysis, and analytical support for resolution of specific technical issues such as direct containment heating. The NRC decided that a broad technical review of the code should be performed by technical experts to determine its overall technical adequacy. For this purpose, a six-member CONTAIN Peer Review Committee was organized and a peer review as conducted. While the review was in progress, the NRC issued a draft ``Revised Severe Accident Code Strategy`` that incorporated revised design objectives and targeted applications for the CONTAIN code. The committee continued its effort to develop findings relative to the original NRC statement of design objectives and targeted applications. However, the revised CONTAIN design objectives and targeted applications. However, the revised CONTAIN design objectives and targeted applications were considered by the Committee in assigning priorities to the Committee`s recommendations. The Committee determined some improvements are warranted and provided recommendations in five code-related areas: (1) documentation, (2) user guidance, (3) modeling capability, (4) code assessment, and (5) technical assessment.

Boyack, B.E. [Los Alamos National Lab., NM (United States); Corradini, M.L. [Univ. of Wisconsin, Madison, WI (United States). Nuclear Engineering Dept.; Denning, R.S. [Battelle Memorial Inst., Columbus, OH (United States); Khatib-Rahbar, M. [Energy Research Inc., Rockville, MD (United States); Loyalka, S.K. [Univ. of Missouri, Columbia, MO (United States); Smith, P.N. [AEA Technology, Dorchester (United Kingdom). Winfrith Technology Center

1995-01-01T23:59:59.000Z

414

Integrated Safety Management  

NLE Websites -- All DOE Office Websites (Extended Search)

ISM Day: March 10, 2010 ISM Day: March 10, 2010 ISM Day: June 6, 2008 Integrated Safety Management (ISM) Seven Principles of ISM Five Functions of ISM "Define the Scope of Work" Is the work clearly defined? Authorized? Do I know how to do the job? Do I have the proper equipment? Support? Have there been problems with tasks like this? "Analyze the Hazards" What are the hazards of the job? What can go wrong? Has the job been reviewed by a qualified person? "Develop Hazard Controls" Are all the necessary controls in place? (LOTO, PPE, Procedures etc.) Do I know what the controls are, and how to use them? What if something unexpected goes wrong? "Perform Work" Has the system responded as expected? How do I know? When will I call for assistance or stop work?

415

Accelerator and electrodynamics capability review  

Science Conference Proceedings (OSTI)

Los Alamos National Laboratory (LANL) uses capability reviews to assess the science, technology and engineering (STE) quality and institutional integration and to advise Laboratory Management on the current and future health of the STE. Capability reviews address the STE integration that LANL uses to meet mission requirements. The Capability Review Committees serve a dual role of providing assessment of the Laboratory's technical contributions and integration towards its missions and providing advice to Laboratory Management. The assessments and advice are documented in reports prepared by the Capability Review Committees that are delivered to the Director and to the Principal Associate Director for Science, Technology and Engineering (PADSTE). Laboratory Management will use this report for STE assessment and planning. LANL has defined fifteen STE capabilities. Electrodynamics and Accelerators is one of the seven STE capabilities that LANL Management (Director, PADSTE, technical Associate Directors) has identified for review in Fiscal Year (FY) 2010. Accelerators and electrodynamics at LANL comprise a blend of large-scale facilities and innovative small-scale research with a growing focus on national security applications. This review is organized into five topical areas: (1) Free Electron Lasers; (2) Linear Accelerator Science and Technology; (3) Advanced Electromagnetics; (4) Next Generation Accelerator Concepts; and (5) National Security Accelerator Applications. The focus is on innovative technology with an emphasis on applications relevant to Laboratory mission. The role of Laboratory Directed Research and Development (LDRD) in support of accelerators/electrodynamics will be discussed. The review provides an opportunity for interaction with early career staff. Program sponsors and customers will provide their input on the value of the accelerator and electrodynamics capability to the Laboratory mission.

Jones, Kevin W [Los Alamos National Laboratory

2010-01-01T23:59:59.000Z

416

DISENTANGLING CONFUSED STARS AT THE GALACTIC CENTER WITH LONG-BASELINE INFRARED INTERFEROMETRY  

SciTech Connect

We present simulations of Keck Interferometer ASTRA and VLTI GRAVITY observations of mock star fields in orbit within {approx}50 mas of Sgr A*. Dual-field phase referencing techniques, as implemented on ASTRA and planned for GRAVITY, will provide the sensitivity to observe Sgr A* with long-baseline infrared interferometers. Our results show an improvement in the confusion noise limit over current astrometric surveys, opening a window to study stellar sources in the region. Since the Keck Interferometer has only a single baseline, the improvement in the confusion limit depends on source position angles. The GRAVITY instrument will yield a more compact and symmetric point-spread function, providing an improvement in confusion noise which will not depend as strongly on position angle. Our Keck results show the ability to characterize the star field as containing zero, few, or many bright stellar sources. We are also able to detect and track a source down to m{sub K} {approx} 18 through the least confused regions of our field of view at a precision of {approx}200 {mu}as along the baseline direction. This level of precision improves with source brightness. Our GRAVITY results show the potential to detect and track multiple sources in the field. GRAVITY will perform {approx}10 {mu}as astrometry on an m{sub K} = 16.3 source and {approx}200 {mu}as astrometry on an m{sub K} = 18.8 source in 6 hr of monitoring a crowded field. Monitoring the orbits of several stars will provide the ability to distinguish between multiple post-Newtonian orbital effects, including those due to an extended mass distribution around Sgr A* and to low-order general relativistic effects. ASTRA and GRAVITY both have the potential to detect and monitor sources very close to Sgr A*. Early characterizations of the field by ASTRA, including the possibility of a precise source detection, could provide valuable information for future GRAVITY implementation and observation.

Stone, Jordan M.; Eisner, J. A. [Steward Observatory, University of Arizona, 933 N. Cherry Ave, Tucson, AZ 85721-0065 (United States); Monnier, J. D. [Astronomy Department, University of Michigan, 941 Dennison Bldg, Ann Arbor, MI 48109-1090 (United States); Woillez, J.; Wizinowich, P. [W. M. Keck Observatory, 65-1120 Mamalahoa Highway, Kamuela, HI 96743 (United States); Pott, J.-U. [Max-Planck-Institut fuer Astronomie, Koenigstuhl 1, D-69117 Heidelberg (Germany); Ghez, A. M., E-mail: jstone@email.arizona.edu, E-mail: jeisner@email.arizona.edu [Department of Physics and Astronomy, UCLA, Los Angeles, CA 90095-1547 (United States)

2012-08-01T23:59:59.000Z

417

Fort Lewis natural gas and fuel oil energy baseline and efficiency resource assessment  

SciTech Connect

The mission of the US Department of Energy (DOE) Federal Energy Management Program (FEMP) is to lead the improvement of energy efficiency and fuel flexibility within the federal sector. Through the Pacific Northwest Laboratory (PNL), FEMP is developing a fuel-neutral approach for identifying, evaluating, and acquiring all cost-effective energy projects at federal installations; this procedure is entitled the Federal Energy Decision Screening (FEDS) system. Through a cooperative program between FEMP and the Army Forces Command (FORSCOM) for providing technical assistance to FORSCOM installations, PNL has been working with the Fort Lewis Army installation to develop the FEDS procedure. The natural gas and fuel oil assessment contained in this report was preceded with an assessment of electric energy usage that was used to implement a cofunded program between Fort Lewis and Tacoma Public Utilities to improve the efficiency of the Fort`s electric-energy-using systems. This report extends the assessment procedure to the systems using natural gas and fuel oil to provide a baseline of consumption and an estimate of the energy-efficiency potential that exists for these two fuel types at Fort Lewis. The baseline is essential to segment the end uses that are targets for broad-based efficiency improvement programs. The estimated fossil-fuel efficiency resources are estimates of the available quantities of conservation for natural gas, fuel oils {number_sign}2 and {number_sign}6, and fuel-switching opportunities by level of cost-effectiveness. The intent of the baseline and efficiency resource estimates is to identify the major efficiency resource opportunities and not to identify all possible opportunities; however, areas of additional opportunity are noted to encourage further effort.

Brodrick, J.R. [USDOE, Washington, DC (United States); Daellenbach, K.K.; Parker, G.B.; Richman, E.E.; Secrest, T.J.; Shankle, S.A. [Pacific Northwest Lab., Richland, WA (United States)

1993-02-01T23:59:59.000Z

418

Fort Lewis natural gas and fuel oil energy baseline and efficiency resource assessment  

SciTech Connect

The mission of the US Department of Energy (DOE) Federal Energy Management Program (FEMP) is to lead the improvement of energy efficiency and fuel flexibility within the federal sector. Through the Pacific Northwest Laboratory (PNL), FEMP is developing a fuel-neutral approach for identifying, evaluating, and acquiring all cost-effective energy projects at federal installations; this procedure is entitled the Federal Energy Decision Screening (FEDS) system. Through a cooperative program between FEMP and the Army Forces Command (FORSCOM) for providing technical assistance to FORSCOM installations, PNL has been working with the Fort Lewis Army installation to develop the FEDS procedure. The natural gas and fuel oil assessment contained in this report was preceded with an assessment of electric energy usage that was used to implement a cofunded program between Fort Lewis and Tacoma Public Utilities to improve the efficiency of the Fort's electric-energy-using systems. This report extends the assessment procedure to the systems using natural gas and fuel oil to provide a baseline of consumption and an estimate of the energy-efficiency potential that exists for these two fuel types at Fort Lewis. The baseline is essential to segment the end uses that are targets for broad-based efficiency improvement programs. The estimated fossil-fuel efficiency resources are estimates of the available quantities of conservation for natural gas, fuel oils [number sign]2 and [number sign]6, and fuel-switching opportunities by level of cost-effectiveness. The intent of the baseline and efficiency resource estimates is to identify the major efficiency resource opportunities and not to identify all possible opportunities; however, areas of additional opportunity are noted to encourage further effort.

Brodrick, J.R. (USDOE, Washington, DC (United States)); Daellenbach, K.K.; Parker, G.B.; Richman, E.E.; Secrest, T.J.; Shankle, S.A. (Pacific Northwest Lab., Richland, WA (United States))

1993-02-01T23:59:59.000Z

419

Baseline Environmental Analysis Report for the K-1251 Barge Facility at the East Tennessee Technology Park, Oak Ridge, Tennessee  

Science Conference Proceedings (OSTI)

This report documents the baseline environmental conditions of the U. S. Department of Energy's (DOE's) K-1251 Barge Facility, which is located at the East Tennessee Technology Park (ETTP). DOE is proposing to lease the facility to the Community Reuse Organization of East Tennessee (CROET). This report provides supporting information for the use, by a potential lessee, of government-owned facilities at ETTP. This report is based upon the requirements of Sect. 120(h) of the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA). The lease footprint is slightly over 1 acre. The majority of the lease footprint is defined by a perimeter fence that surrounds a gravel-covered area with a small concrete pad within it. Also included is a gravel drive with locked gates at each end that extends on the east side to South First Avenue, providing access to the facility. The facility is located along the Clinch River and an inlet of the river that forms its southern boundary. To the east, west, and north, the lease footprint is surrounded by DOE property. Preparation of this report included the review of government records, title documents, historic aerial photos, visual and physical inspections of the property and adjacent properties, and interviews with current and former employees involved in the operations on the real property to identify any areas on the property where hazardous substances and petroleum products or their derivatives and acutely hazardous wastes were known to have been released or disposed. Radiological surveys were conducted and chemical samples were collected to assess the facility's condition.

Van Winkle J.E.

2007-08-24T23:59:59.000Z

420

Formation and Sustainment of ITPs in ITER with the Baseline Heating Mix  

SciTech Connect

Plasmas with internal transport barriers (ITBs) are a potential and attractive route to steady-state operation in ITER. These plasmas exhibit radially localized regions of improved con nement with steep pressure gradients in the plasma core, which drive large bootstrap current and generate hollow current pro les and negative shear. This work examines the formation and sustainment of ITBs in ITER with electron cyclotron heating and current drive. It is shown that, with a trade-o of the power delivered to the equatorial and to the upper launcher, the sustainment of steady-state ITBs can be demonstrated in ITER with the baseline heating con guration.

Francesca M. Poli and Charles Kessel

2012-12-03T23:59:59.000Z

Note: This page contains sample records for the topic "integrated baseline review" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Policy implications of the GRI baseline projection of US energy supply and demand to 2015, 1997  

SciTech Connect

The summary of the 1997 Edition of the GRI Baseline Projection of U.S. Energy Supply and Demand discusses the implications of the projection that are important for GRI strategic planning and scenario development, and for the gas industry. The projection indicates that with adequate technology advances, natural gas will play a major role in an increasingly competitive energy mix well into the next century. It is expected that the expansion in gas markets experienced over the last decade will continue over the long term.

NONE

1997-03-01T23:59:59.000Z

422

SRC-I Project Baseline. [SRC-I demonstration project near Owensboro, Kentucky  

SciTech Connect

The Process Design Criteria Specification forms the basis for process design for the 6000-TPSD SRC-I Demonstration Plant. It sets forth: basic engineering data, e.g., type and size of plant, feedstocks, product specifications, and atmospheric emission and waste disposal limits; utility conditions; equipment design criteria and sparing philosophy; and estimating criteria for economic considerations. Previously the formal ICRC Document No. 0001-01-002 has been submitted to DOE and revised, as necessary, to be consistent with the SRC-I Project Baseline. Revision 6, dated 19 March 1982, 51 pages, was forwarded to DOE on 19 March 1982.

None

1982-03-01T23:59:59.000Z

423

CP and T violation in long baseline experiments with low energy neutrino from muon storage ring  

E-Print Network (OSTI)

Stimulated by the idea of PRISM, a very high intensity muon ring with rather low energy, we consider possibilities of observing CP-violation effects in neutrino oscillation experiments. More than 10% of CP-violation effect can be seen within the experimentally allowed region. Destructive sum of matter effect and CP-violation effect can be avoided with use of initial nu_e beam. We finally show that the experiment with (a few) x 100 MeV of neutrino energy and (a few) x 100 km of baseline length, which is considered in this paper, is particularly suitable for a search of CP violation in view of statistical error.

Masafumi Koike; Joe Sato

1999-09-22T23:59:59.000Z

424

A Sensor-based Long Baseline Position and Velocity Navigation Filter for Underwater Vehicles  

E-Print Network (OSTI)

This paper presents a novel Long Baseline (LBL) position and velocity navigation filter for underwater vehicles based directly on the sensor measurements. The solution departs from previous approaches as the range measurements are explicitly embedded in the filter design, therefore avoiding inversion algorithms. Moreover, the nonlinear system dynamics are considered to their full extent and no linearizations are carried out whatsoever. The filter error dynamics are globally asymptotically stable (GAS) and it is shown, under simulation environment, that the filter achieves similar performance to the Extended Kalman Filter (EKF) and outperforms linear position and velocity filters based on algebraic estimates of the position obtained from the range measurements.

Batista, Pedro; Oliveira, Paulo

2010-01-01T23:59:59.000Z

425

FOCUSING HORN SYSTEM FOR THE BNL VERY LONG BASELINE NEUTRINO OSCILLATION EXPERIMENT.  

SciTech Connect

This paper describes the focusing horn system for the proposed very long baseline neutrino oscillation experiment using a neutrino beam from BNL to an underground facility such as the Homestake Mine in South Dakota. The proposed experiment uses a 1 MW upgraded AGS. In order to achieve this performance the AGS will operate with a cycle time of 2.5 Hz and 8.9 x 10{sup 13} protons on target at 28 GeV. This paper discusses the design criteria of a horn system necessary to handle this intense beam and the optical geometry to achieve the desired flux distribution at the detector.

KAHN,S.A.CARROLL,A.DIWAN,M.V.GALLARDO,J.C.KIRK,H.SCARLETT,C.SIMOS,N.VIREN,B.ZHANG,W.

2003-05-12T23:59:59.000Z

426

Analytical Review  

DOE Green Energy (OSTI)

ANL Performs Independent Review for DOE on the following topics: (1) Systematic analysis--Depends on question asked; (2) Compare technologies and pathways--Examples: (a) fuels, power plant technologies, vehicle materials; (b) Total lifecycle analysis reveals national and global impacts; and (3) Direction of R&D to most fruitful areas.

Frank Stodolsky

2000-04-11T23:59:59.000Z

427

Literature Review | OpenEI Community  

Open Energy Info (EERE)

Literature Review Literature Review Home Qinsun's picture Submitted by Qinsun(35) Member 15 November, 2012 - 13:19 A Framework for the Optimization of Integrated Energy Systems(Jain and Alleyne 2012) Literature Review The author proposed a generalized, control-oriented, exergy-based objective function for optimizing the ESI. It was generalized form for ESI. The metric is suitable for power and thermal systems. It provide an objective modular. The method used in the paper was exergy and feedforward control Qinsun's picture Submitted by Qinsun(35) Member 15 November, 2012 - 13:09 Energy System Integration(Smith 2001) Literature Review This paper proposed the business analysis on energy system integration. It provided a procedure for the business analysis, and listed related techniques and technologies.

428

Book Review of Electrolytes...  

Science Conference Proceedings (OSTI)

Book Review of Electrolytes. Properties of Solutions. ... We review the book entitled, "Electrolytes. Properties of Solutions. ...

429

Baseline Fracture Toughness and CGR testing of alloys X-750 and XM-19 (EPRI Phase I)  

SciTech Connect

The Advanced Test Reactor National Scientific User Facility (ATR NSUF) and Electric Power Research Institute (EPRI) formed an agreement to test representative alloys used as reactor structural materials as a pilot program toward establishing guidelines for future ATR NSUF research programs. This report contains results from the portion of this program established as Phase I (of three phases) that entails baseline fracture toughness, stress corrosion cracking (SCC), and tensile testing of selected materials for comparison to similar tests conducted at GE Global Research. The intent of this Phase I research program is to determine baseline properties for the materials of interest prior to irradiation, and to ensure comparability between laboratories using similar testing techniques, prior to applying these techniques to the same materials after having been irradiated at the Advanced Test Reactor (ATR). The materials chosen for this research are the nickel based super alloy X-750, and nitrogen strengthened austenitic stainless steel XM-19. A spare core shroud upper support bracket of alloy X-750 was purchased by EPRI from Southern Co. and a section of XM-19 plate was purchased by EPRI from GE-Hitachi. These materials were sectioned at GE Global Research and provided to INL.

J. H. Jackson; S. P. Teysseyre

2012-02-01T23:59:59.000Z

430

Baseline Fracture Toughness and CGR testing of alloys X-750 and XM-19 (EPRI Phase I)  

SciTech Connect

The Advanced Test Reactor National Scientific User Facility (ATR NSUF) and Electric Power Research Institute (EPRI) formed an agreement to test representative alloys used as reactor structural materials as a pilot program toward establishing guidelines for future ATR NSUF research programs. This report contains results from the portion of this program established as Phase I (of three phases) that entails baseline fracture toughness, stress corrosion cracking (SCC), and tensile testing of selected materials for comparison to similar tests conducted at GE Global Research. The intent of this Phase I research program is to determine baseline properties for the materials of interest prior to irradiation, and to ensure comparability between laboratories using similar testing techniques, prior to applying these techniques to the same materials after having been irradiated at the Advanced Test Reactor (ATR). The materials chosen for this research are the nickel based super alloy X-750, and nitrogen strengthened austenitic stainless steel XM-19. A spare core shroud upper support bracket of alloy X-750 was purchased by EPRI from Southern Co. and a section of XM-19 plate was purchased by EPRI from GE-Hitachi. These materials were sectioned at GE Global Research and provided to INL.

J. H. Jackson; S. P. Teysseyre

2012-10-01T23:59:59.000Z

431

Neutrino mass hierarchy determination and other physics potential of medium-baseline reactor neutrino oscillation experiments  

E-Print Network (OSTI)

Medium-baseline reactor neutrino oscillation experiments (MBRO) have been proposed to determine the neutrino mass hierarchy (MH) and to make precise measurements of the neutrino oscillation parameters. With sufficient statistics, better than ~3%/\\sqrt{E} energy resolution and well understood energy non-linearity, MH can be determined by analyzing oscillation signals driven by the atmospheric mass-squared difference in the survival spectrum of reactor antineutrinos. With such high performance MBRO detectors, oscillation parameters, such as \\sin^22\\theta_{12}, \\Delta m^2_{21}, and \\Delta m^2_{32}, can be measured to sub-percent level, which enables a future test of the PMNS matrix unitarity to ~1% level and helps the forthcoming neutrinoless double beta decay experiments to constrain the allowed values. Combined with results from the next generation long-baseline beam neutrino and atmospheric neutrino oscillation experiments, the MH determination sensitivity can reach higher levels. In addition to the neutrino oscillation physics, MBRO detectors can also be utilized to study geoneutrinos, astrophysical neutrinos and proton decay. We propose to start a U.S. R&D program to identify, quantify and fulfill the key challenges essential for the success of MBRO experiments.

A. B. Balantekin; H. Band; R. Betts; J. J. Cherwinka; J. A. Detwiler; S. Dye; K. M. Heeger; R. Johnson; S. H. Kettell; K. Lau; J. G. Learned; C. J. Lin; J. J. Ling; B. Littlejohn; D. W. Liu; K. B. Luk; J. Maricic; K. McDonald; R. D. McKeown; J. Napolitano; J. C. Peng; X. Qian; N. Tolich; W. Wang; C. White; M. Yeh; C. Zhang; T. Zhao

2013-07-28T23:59:59.000Z

432

Using the baseline environmental management report (BEMR) to examine alternate program scenarios  

SciTech Connect

The US Department of Energy`s (DOE) Office of Environmental Management (EM) released the first Baseline Environmental Management Report (BEMR) in March, 1995. The Congressionally-mandated report provides life-cycle cost estimates, tentative schedules, and projected activities necessary to complete DOE`s Environmental Management Program. This ``base case`` estimate is based on current program assumptions and the most likely set of activities. However, since the future course of the Environmental Management Program depends upon a number of fundamental technical and policy choices, alternate program scenarios were developed. These alternate cases show the potential cost impacts of changing assumptions in four key areas: future land use, program funding and scheduling, technology development, and waste management configurations. Several cost and program evaluation tools were developed to support the analysis of these alternate cases. The objective of this paper is to describe the analytical tool kit developed to support the development of the 1995 Baseline Report and to discuss the application of these tools to evaluate alternate program scenarios.

Kristofferson, K.

1995-12-01T23:59:59.000Z

433

Estimating the Cold War mortgage: The 1995 baseline environmental management report. Volume 1  

Science Conference Proceedings (OSTI)

This is the first annual report on the activities and potentials costs required to address the waste, contamination, and surplus nuclear facilities that are the responsibility of the Department of Energy`s Environmental Management program. The Department`s Office of Environmental Management, established in 1989, manages one of the largest environmental programs in the world--with more than 130 sites and facilities in over 30 States and territories. The primary focus of the program is to reduce health and safety risks from radioactive waste and contamination resulting from the production, development, and testing of nuclear weapons. The program also is responsible for the environmental legacy from, and ongoing waste management for, nuclear energy research and development, and basic science research. In an attempt to better oversee this effort, Congress required the Secretary of Energy to submit a Baseline Environmental Management Report with annual updates. The 1995 Baseline Environmental Management Report provides life-cycle cost estimates, tentative schedules, and projected activities necessary to complete the Environmental Management program.

NONE

1995-03-01T23:59:59.000Z

434

VERY LONG BASELINE ARRAY ASTROMETRIC OBSERVATIONS OF THE CASSINI SPACECRAFT AT SATURN  

Science Conference Proceedings (OSTI)

The planetary ephemeris is an essential tool for interplanetary spacecraft navigation, studies of solar system dynamics (including, for example, barycenter corrections for pulsar timing ephemerides), the prediction of occultations, and tests of general relativity. We are carrying out a series of astrometric very long baseline interferometry observations of the Cassini spacecraft currently in orbit around Saturn, using the Very Long Baseline Array (VLBA). These observations provide positions for the center of mass of Saturn in the International Celestial Reference Frame (ICRF) with accuracies {approx}0.3 mas (1.5 nrad) or about 2 km at the average distance of Saturn. This paper reports results from eight observing epochs between 2006 October and 2009 April. These data are combined with two VLBA observations by other investigators in 2004 and a Cassini-based gravitational deflection measurement by Fomalont et al. in 2009 to constrain a new ephemeris (DE 422). The DE 422 post-fit residuals for Saturn with respect to the VLBA data are generally 0.2 mas, but additional observations are needed to improve the positions of all of our phase reference sources to this level. Over time we expect to be able to improve the accuracy of all three coordinates in the Saturn ephemeris (latitude, longitude, and range) by a factor of at least three. This will represent a significant improvement not just in the Saturn ephemeris but also in the link between the inner and outer solar system ephemerides and in the link to the inertial ICRF.

Jones, Dayton L.; Folkner, William M.; Lanyi, Gabor; Border, James; Jacobson, Robert A. [Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA 91109 (United States); Fomalont, Ed [National Radio Astronomy Observatory, Charlottesville, VA 22903 (United States); Dhawan, Vivek; Romney, Jon, E-mail: dayton.jones@jpl.nasa.gov [National Radio Astronomy Observatory, Socorro, NM 87801 (United States)

2011-02-15T23:59:59.000Z

435

Measuring the mass of a sterile neutrino with a very short baseline reactor experiment  

E-Print Network (OSTI)

An analysis of the world's neutrino oscillation data, including sterile neutrinos, (M. Sorel, C. M. Conrad, and M. H. Shaevitz, Phys. Rev. D 70, 073004) found a peak in the allowed region at a mass-squared difference $\\Delta m^2 \\cong 0.9$ eV$^2$. We trace its origin to harmonic oscillations in the electron survival probability $P_{ee}$ as a function of L/E, the ratio of baseline to neutrino energy, as measured in the near detector of the Bugey experiment. We find a second occurrence for $\\Delta m^2 \\cong 1.9$ eV$^2$. We point out that the phenomenon of harmonic oscillations of $P_{ee}$ as a function of L/E, as seen in the Bugey experiment, can be used to measure the mass-squared difference associated with a sterile neutrino in the range from a fraction of an eV$^2$ to several eV$^2$ (compatible with that indicated by the LSND experiment), as well as measure the amount of electron-sterile neutrino mixing. We observe that the experiment is independent, to lowest order, of the size of the reactor and suggest the possibility of a small reactor with a detector sitting at a very short baseline.

D. C. Latimer; J. Escamilla; D. J. Ernst

2007-01-04T23:59:59.000Z

436

Alcator C-Mod Experiments in Support of the ITER Baseline 15 MA Scenario  

SciTech Connect

Experiments on Alcator C-Mod have addressed several issues for the ITER 15 MA baseline scenario from 2009-2012. Rampup studies show ICRF can save significant V-s, and that an H-mode in the ramp can be utilized to save 50% more. ICRF modifications to li(1) are minimal, although the Te profile is peaked relative to ohmic in the plasma center, and alter sawtooth onset times. Rampdown studies show H-modes can be routinely sustained, avoiding an OH coil over-current associated with the H-L transition, that fast rampdowns are preferred, the density drops with Ip, and that the H-L transition occurs at Ploss/Pthr,LH ~ 1.0-1.3 at n/nGr ~ 0.85. Flattop plasmas targeting ITER baseline parameters have been sustained for 20 ?E or 8-13 ?CR, but only reach H98 ~ 0.6 at n/nGr = 0.85, rising to 0.9 at n/nGr = 0.65.

C Kessel, et al

2013-05-07T23:59:59.000Z

437

Baseline Design Compliance Matrix for the Rotary Mode Core Sampling System  

SciTech Connect

The purpose of the design compliance matrix (DCM) is to provide a single-source document of all design requirements associated with the fifteen subsystems that make up the rotary mode core sampling (RMCS) system. It is intended to be the baseline requirement document for the RMCS system and to be used in governing all future design and design verification activities associated with it. This document is the DCM for the RMCS system used on Hanford single-shell radioactive waste storage tanks. This includes the Exhauster System, Rotary Mode Core Sample Trucks, Universal Sampling System, Diesel Generator System, Distribution Trailer, X-Ray Cart System, Breathing Air Compressor, Nitrogen Supply Trailer, Casks and Cask Truck, Service Trailer, Core Sampling Riser Equipment, Core Sampling Support Trucks, Foot Clamp, Ramps and Platforms and Purged Camera System. Excluded items are tools such as light plants and light stands. Other items such as the breather inlet filter are covered by a different design baseline. In this case, the inlet breather filter is covered by the Tank Farms Design Compliance Matrix.

LECHELT, J.A.

2000-10-17T23:59:59.000Z

438

A catalog of bright calibrator stars for 200-meter baseline near-infrared stellar interferometry  

E-Print Network (OSTI)

We present in this paper a catalog of reference stars suitable for calibrating infrared interferometric observations. In the K band, visibilities can be calibrated with a precision of 1% on baselines up to 200 meters for the whole sky, and up to 300 meters for some part of the sky. This work, extending to longer baselines a previous catalog compiled by Borde et al. (2002), is particularly well adapted to hectometric-class interferometers such as the Very Large Telescope Interferometer (VLTI, Glindemann et al. 2003) or the CHARA array (ten Brummelaar et al. 2003) when observing well resolved, high surface brightness objects (K<8). We use the absolute spectro-photometric calibration method introduced by Cohen et al. (1999) to derive the angular diameters of our new set of 948 G8--M0 calibrator stars extracted from IRAS, 2MASS and MSX catalogs. Angular stellar diameters range from 0.6 mas to 1.8 mas (median is 1.1 mas) with a median precision of 1.35%. For both the northern and southern hemispheres, the closest calibrator star is always less than 10 degree away.

A. Merand; P. Borde; V. Coude du Foresto

2004-12-10T23:59:59.000Z

439

Dynamic gating window for compensation of baseline shift in respiratory-gated radiation therapy  

Science Conference Proceedings (OSTI)

Purpose: To analyze and evaluate the necessity and use of dynamic gating techniques for compensation of baseline shift during respiratory-gated radiation therapy of lung tumors. Methods: Motion tracking data from 30 lung tumors over 592 treatment fractions were analyzed for baseline shift. The finite state model (FSM) was used to identify the end-of-exhale (EOE) breathing phase throughout each treatment fraction. Using duty cycle as an evaluation metric, several methods of end-of-exhale dynamic gating were compared: An a posteriori ideal gating window, a predictive trend-line-based gating window, and a predictive weighted point-based gating window. These methods were evaluated for each of several gating window types: Superior/inferior (SI) gating, anterior/posterior beam, lateral beam, and 3D gating. Results: In the absence of dynamic gating techniques, SI gating gave a 39.6% duty cycle. The ideal SI gating window yielded a 41.5% duty cycle. The weight-based method of dynamic SI gating yielded a duty cycle of 36.2%. The trend-line-based method yielded a duty cycle of 34.0%. Conclusions: Dynamic gating was not broadly beneficial due to a breakdown of the FSM's ability to identify the EOE phase. When the EOE phase was well defined, dynamic gating showed an improvement over static-window gating.

Pepin, Eric W.; Wu Huanmei; Shirato, Hiroki [School of Health Sciences, Purdue University, West Lafayette, Indiana 47907 (United States); Purdue School of Engineering Technology, IUPUI, Indianapolis, Indiana 46202 (United States); Hokkaido University School of Medicine, Sapporo, 060-8638 (Japan)

2011-04-15T23:59:59.000Z

440

Special Review of the Rocky Flats Closure Project Site  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

April April 2001 Special Review of the Integrated Safety Management ISM OVERSIGHT Table of Contents EXECUTIVE SUMMARY ............................................................................... 1 1.0 INTRODUCTION ...................................................................................... 6 2.0 FOCUSED REVIEW OF THE INTEGRATED WORK CONTROL PROCESS AND LINE MANAGEMENT OVERSIGHT .............................................................................................. 8 2.1 Background ...................................................................................... 8 2.2 Line Management Oversight and Selected Other Management Systems .................................................................... 10 2.3 Rocky Flats Closure Project Integrated Work Control Process

Note: This page contains sample records for the topic "integrated baseline review" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Regional Profiles for Distributed Resource Integration  

Science Conference Proceedings (OSTI)

This report characterizes regional drivers and challenges for distributed resource integration. Information gathered includes research and demonstration activities being conducted to integrate distributed resources into grid and market systems. The report summarizes lessons learned from literature review, workshops, and surveys conducted by EPRI in 2009 and 2010. The information gathered through these various channels is applied in this report towards identifying regional trends, demonstration needs, and...

2010-12-31T23:59:59.000Z

442

Integrated Designs to Integrated Operations using BMS  

NLE Websites -- All DOE Office Websites (Extended Search)

Integrated Designs to Integrated Operations using BMS Speaker(s): Punit Desai Date: February 6, 2013 - 12:15pm Location: 90-3122 Seminar HostPoint of Contact: Girish Ghatikar The...

443

A Review  

NLE Websites -- All DOE Office Websites (Extended Search)

Review Review of BNL Direct-Wind Superconducting IR Magnet Experience 30th Advanced ICFA Beam Dynamics Workshop on High Luminosity e+e - Collisions October 13-16, 2003 Stanford, California Presented by Brett Parker for the Brookhaven Superconducting Magnet Division * Overview of Past and Current Projects. - HERA-II Luminosity Upgrade IR Magnets. - NLC Superconducting Final Focus Magnets. - BEPC-II Luminosity Upgrade IR Magnets. * Winding Technology Overview. - New Types of "Serpentine" Coil Windings. - Winding Test of BEPC-II Serpentine Coil. * Some Issues Relevant for Super B-Factory. - Cryostat & Warm Bore Allowance. - Quadrupole Coil Layout Options. - Magnetic Length Vs. Slot Length. - Dipole Torque Considerations. " A R e v i e w o f B N L D i r e c t - W i n d Superconducting IR Magnet Experience." HERA-II GO Magnet Installed in H1 BNL Winding Machine Stainless

444

DOE Review  

NLE Websites -- All DOE Office Websites (Extended Search)

Review 2007 Review 2007 AWA Facility Update, High Gradient Wakefield Generation, and Future Upgrades Manoel Conde, Sergey Antipov, Felipe Franchini, Wei Gai, Feng Gao, Chunguang Jing, Richard Konecny, Wanming Liu, Jidong Long, John Power, Haitao Wang, Zikri Yusof Argonne Wakefield Accelerator Group High Energy Physics Division April 25 - 27, 2007 2 Outline Description of AWA Facililty. Wakefield structures built and tested. Measurements and simulations. List of next experiments to be performed. Plans for Facility upgrades. 3 AWA Drive Beamline Drive Gun Linac & Steering Coils Quads Wakefield Structure Experimental Chambers 4.5 m GV GV YAG1 YAG2 Spectrometer YAG5 Dump/ Faraday Cup Slits YAG4 YAG3 ICT1 ICT2 BPM Single bunch operation - Q=1-100 nC - Energy=15 MeV - High Current = 10 kAmp

445

Microsoft Word - 42652 UCI Task 1.2_ Baseline Cycle Configuration...  

NLE Websites -- All DOE Office Websites (Extended Search)

Agnew, G., et. al., "The Design and Integration of the Rolls-Royce Fuel Cell Systems 1 MW SOFC, "Proceedings of the ASME Turbo Expo Conference, Reno-Nevada, June 2005. 2....

446

Assessment Hydrogen Production with CO2 Capture, Volume 1: Baseline State of the Art Plants  

NLE Websites -- All DOE Office Websites (Extended Search)

Hydrogen Hydrogen Production with CO 2 Capture Volume 1: Baseline State-of- the-Art Plants August 30, 2010 DOE/NETL-2010/1434 Disclaimer This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference therein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States

447

BASELINE RISK ASSESSMENT OF GROUND WATER CONTAMINATION AT THE URAN~UM MILL TAILINGS  

Office of Legacy Management (LM)

I~:-:ii*.i: i,<;.;.-;_r- --:-:ir-- I~:-:ii*.i: i,<;.;.-;_r- --:-:ir-- - . . - -. . - . . - , -, . , , , - - - - . BASELINE RISK ASSESSMENT OF GROUND WATER CONTAMINATION AT THE URAN~UM MILL TAILINGS SITE NEAR RIVERTON, WYOMING I i I I I Prepared by the U.S. Department of Energy Albuquerque, New Mexico September 1995 INTENDED FOR PUBLIC RELEASE This report has been reproduced from the best available copy. Avai and microfiche Number of pages in this report: 166 DOE and DOE contractors can obtain copies of this report from: Office of Scientific and Technical information P.O. Box 62 Oak Ridge, TN 37831 (61 5) 576-8401 This report is publicly available from: National Technical information Service Department of Commerce 5285 Port Royal Road Springfield, VA 22161 (703) 487-4650 DOEIAL162350-65

448

DOE-EM-STD-5502-94; DOE Limited Standard Hazard Baseline Documentation  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NOT MEASUREMENT SENSITIVE DOE-EM-STD-5502-94 August 1994 DOE LIMITED STANDARD HAZARD BASELINE DOCUMENTATION U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (615) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 487-4650. Order No. DE94016623 DOE-EM-STD-5502-94

449

Baseline data for the residential sector and development of a residential forecasting database  

SciTech Connect

This report describes the Lawrence Berkeley Laboratory (LBL) residential forecasting database. It provides a description of the methodology used to develop the database and describes the data used for heating and cooling end-uses as well as for typical household appliances. This report provides information on end-use unit energy consumption (UEC) values of appliances and equipment historical and current appliance and equipment market shares, appliance and equipment efficiency and sales trends, cost vs efficiency data for appliances and equipment, product lifetime estimates, thermal shell characteristics of buildings, heating and cooling loads, shell measure cost data for new and retrofit buildings, baseline housing stocks, forecasts of housing starts, and forecasts of energy prices and other economic drivers. Model inputs and outputs, as well as all other information in the database, are fully documented with the source and an explanation of how they were derived.

Hanford, J.W.; Koomey, J.G.; Stewart, L.E.; Lecar, M.E.; Brown, R.E.; Johnson, F.X.; Hwang, R.J.; Price, L.K.

1994-05-01T23:59:59.000Z

450

Energy Analysis, Baselining and Modeling of Prairie View A&M University  

E-Print Network (OSTI)

Analysis of the available data found that electricity savings in the J.B. Coleman Library for June - September, 1998 were 298 MWh, or 38% of the baseline consumption during these months. Extrapolation of these savings to a full year leads would result in savings of 894 MWh/year. This would result in annual electricity cost savings of $42,500 at the average cost of $0.0475/kWh which was paid by the University for the period October, 1997 - September, 1998. Smaller savings were expected in chilled water, but were not evident in the data available. Likewise, no significant increase in hot water use was observed during the June - September period analyzed.

Abushakra, B.; Haberl, J. S.; Claridge, D. E.; Eggebrecht, J.; Carlson, K. A.

1998-01-01T23:59:59.000Z