National Library of Energy BETA

Sample records for inspector general enclosure

  1. OFFICE OF INSPECTOR GENERAL

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    APP-005 Planning for and Measuring Office of Inspector General Results FY 2002 Annual Performance Report and FY 2003 Annual Performance Plan Office of Inspector General U.S. Department of Energy Inspector General's Message We are pleased to present the Office of Inspector General's (OIG) consolidated Fiscal Year 2002 Annual Performance Report and Fiscal Year 2003 Annual Performance Plan. This document evaluates our actual Fiscal Year (FY) 2002 performance and establishes the performance goals

  2. Office of Inspector General

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Office of Inspector General Office of Audits and Inspections Work Plan for FY 2013 Audits Central Audits Division  Ecotality  Funding Overlap  Follow-up on Smart Grid Investment Grant  DOE's Loan Program Office's Portfolio Management  Office of Fossil Energy's Regional Carbon Sequestration Partnerships  Advanced Manufacturing Office's Combined Heat and Power Systems  DOE's Management of Contaminated Non-EM Facilities  Unneeded Real Estate  Review of For-Profit Grantees

  3. Cooperation with the Office of Inspector General

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2001-03-21

    To establish Department of Energy (DOE) policy for cooperating with the Office of Inspector General (OIG). Cancels DOE 2320.1C

  4. Cooperation with the Office of Inspector General

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2008-02-25

    To establish responsibilities and requirements for cooperating with the Department of Energy Office of Inspector General. Supersedes DOE O 221.2.

  5. Office of Inspector General | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Department » Office of Inspector General Office of Inspector General Office of Inspector General Latest Reports & News August 4, 2016 Inspection Report: OAI-L-16-13 Technetium-99 Incident at Los Alamos National Laboratory July 29, 2016 Assessment Report: OAI-V-16-11 Audit Coverage of Cost Allowability for UT-Battelle LLC During Fiscal Year 2014 Under Department of Energy Contract No. DE-AC05-00OR22725 July 27, 2016 Audit Report: OAI-M-16-14 Battelle's Pacific Northwest National

  6. Office of Inspector General Quarterly Report | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Office of Inspector General Quarterly Report OIG summary of reports from Oct 1, 2002-December 31, 2002 PDF icon Office of Inspector General Quarterly Report More Documents & ...

  7. Office of Inspector General | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    FAX: (202) 586-4902 Rickey R. Hass Acting Inspector General More about Rickey Hass Stay Connected Facebook logo Twitter logo Subscribe RSS logo Subscribe to receive the latest...

  8. PIA - Energy Inspector General Project Tracking System (EIGPT) | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Inspector General Project Tracking System (EIGPT) PIA - Energy Inspector General Project Tracking System (EIGPT) PIA - Energy Inspector General Project Tracking System (EIGPT) PIA - Energy Inspector General Project Tracking System (EIGPT) (72.55 KB) More Documents & Publications PIA - FOIAXpress PIA - INL SECURITY INFORMATION MANAGEMENT SYSTEM BUSINESS ENCLAVE PIA - INL PeopleSoft - Human Resource System

  9. Office of Inspector General Annual Performance Plan 2010

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Office of Inspector General Gregory H. Friedman Inspector General This report is also available on the Department of Energy/Office of Inspector General website at http://www.ig.energy.gov ANNUAL PERFORMANCE REPORT FY 2009 ANNUAL PERFORMANCE PLAN FY 2010 U.S. DEPARTMENT OF ENERGY OFFICE OF INSPECTOR GENERAL THIS PAGE INTENTIONALLY LEFT BLANK Message from the Inspector General I am pleased to present the Office of Inspector GeneralÕs combined Fiscal Year 2009 Annual Performance Report and Fiscal

  10. Office of Inspector General Annual Performance Plan 2011

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Performance Report FY 2010 Annual Performance Plan FY 2011 Office of Inspector General DOE/IG-APP012 Annual Performance Report FY 2010 Annual Performance Plan FY 2011 U.S. DEPARTMENT OF ENERGY OFFICE OF INSPECTOR GENERAL II DEPARTMENT OF ENERGY, OFFicE OF iNsPEcTOR GENERAl THIS PAGE INTENTIONALLY LEFT BLANK FY 2010 ANNUAl PERFORMANcE REPORT III Message from the Inspector General I am pleased to submit the Office of Inspector General's combined Fiscal Year 2010 Annual Performance Report and

  11. Testimony by the Inspector General | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Testimony by the Inspector General Testimony by the Inspector General Testimony by the Inspector General August 1, 2013 Gregory H. Friedman: Provided for The Committee on Oversight and Government Reform U.S. House of Representatives Gregory H. Friedman: Provided for The Committee on Oversight and Government Reform U.S. House of Representatives July 24, 2013 Gregory H. Friedman: Provided for the Subcommittee on Oversight and Investigations Committee on Energy and Commerce U.S. House of

  12. U. S. SMALL BUSINESS ADMINISTRATION OFFICE OF INSPECTOR GENERAL

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    SMALL BUSINESS ADMINISTRATION OFFICE OF INSPECTOR GENERAL INVESTIGATIONS DIVISION WASHINGTON, DC 20416 September 15, 2008 The Honorable Gregory H. Friedman Inspector General U.S. Department of Energy 1000 Independence Avenue, SW Washington, DC 20585 Subject: Report on the Quality Assessment Review of the Investigative Operations of the Office of Inspector General for the U.S. Department of Energy Dear Mr. Friedman: We have reviewed the system of internal safeguards and management procedures for

  13. U.S. Department of Energy Office of Inspector General

    Energy Savers [EERE]

    of Inspector General Office of Audits and Inspections INSPECTION REPORT Alleged Fraud, Waste, Abuse and (b)(6),(b)(7)(C) Mismanagement at the Site Office -. . , .. . - ' - -...

  14. DEPARTMENT OF ENERGY OFFICE OF INSPECTOR GENERAL STRATEGIC PLAN

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... The Office of Inspector General Whistleblower Ombudsman educates Department employees about prohibitions on retaliation for whistle blowing, as well as employees' rights and ...

  15. Office of Inspector General, Hotline Poster | Department of Energy

    Office of Environmental Management (EM)

    Office of Inspector General, Hotline Poster Contact the HOTLINE if you suspect Fraud, Waste, or Abuse by a DOE employee, contractor, or grant recipient involving DOE programs, ...

  16. Establishment of Management Decisions on Office of Inspector General Reports

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2001-12-17

    To establish the responsibilities and requirements for Department of Energy (DOE) action required to make management decisions on Office of Inspector General (OIG) audit and public inspection reports. Cancels DOE 2320.2B

  17. Establishment of Management Decisions on Office of Inspector General Reports

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2008-04-19

    The order establishes the responsibilities and requirements for Department of Energy elements to make management decisions on Office of Inspector General audits and public inspection reports. Supersedes DOE O 221.3.

  18. U.S. Department of Energy Office of Inspector General

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Accountability and Control of Explosives at Lawrence Livermore National Laboratory's High Explosives Applications Facility INS-O-13-06 September 2013 Department of Energy Washington, DC 20585 September 30, 2013 MEMORANDUM FOR THE MANAGER, LIVERMORE FIELD OFFICE FROM: Sandra D. Bruce Assistant Inspector General for Inspections Office of Inspector General SUBJECT: INFORMATION: Inspection Report on "Accountability and Control of Explosives at the Lawrence Livermore National Laboratory's High

  19. Office Inspector General DOE Annual Performance Report FY 2008, Annual

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Performance Plan FY 2009 | Department of Energy Inspector General DOE Annual Performance Report FY 2008, Annual Performance Plan FY 2009 Office Inspector General DOE Annual Performance Report FY 2008, Annual Performance Plan FY 2009 During Fiscal Year (FY) 2008, we reviewed a variety of critical areas relevant to the Department's mission priorities. One of our goals, for example, was to examine possible programmatic improvements in Department operations relating to cyber security and

  20. U.S. Department of Energy Office of Inspector General

    Energy Savers [EERE]

    Travis County Health & Human Services and Veterans Services - Weatherization Assistance Program Funds Provided by the American Recovery and Reinvestment Act of 2009 OAS-RA-13-18 April 2013 Department of Energy Washington, DC 20585 April 18, 2013 MEMORANDUM FOR THE ASSISTANT SECRETARY FOR ENERGY EFFICIENCY AND RENEWABLE ENERGY FROM: Rickey R. Hass Deputy Inspector General for Audits and Inspections Office of Inspector General SUBJECT: INFORMATION: Examination Report on "Travis County

  1. U.S. Department of Energy Office of Inspector General

    Energy Savers [EERE]

    Review Cost Incentives for the Department's Cleanup Contract in Idaho OAS-RA-13-20 May 2013 Department of Energy Washington, DC 20585 May 13, 2013 MEMORANDUM FOR THE MANAGER, IDAHO OPERATIONS OFFICE FROM: Rickey R. Hass Deputy Inspector General for Audits and Inspections Office of Inspector General SUBJECT: INFORMATION: Special Review of "Cost Incentives for the Department's Cleanup Contract in Idaho" BACKGROUND In Fiscal Year 2005, the Department of Energy (Department) awarded a

  2. DEPARTMENT OF ENERGY OFFICE OF INSPECTOR GENERAL Security Review Process

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    OFFICE OF INSPECTOR GENERAL Security Review Process S TEP ONE Complete and Return Security Acknowledgment Form You are responsible for returning the signed original Security Acknowledgement Form (DOE F 5631.18) located at http://www.energy.gov/ig/new-employees . The signed form should be returned to the Office of Inspector General's Headquarters Security Officer, via express mail, within 5 business days of receipt of your Tentative Appointment Letter. The form must be mailed to: Attn: Tiffany

  3. U.S. Department of Energy Office of Inspector General

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    rt is the property of the Office of Inspector General and is for OFFICIAL USE Appropriate safeguards should be pro * * ited to Departm DOE/IG-0927 November 2014 8Pfl81AL ~8E 8P4L\' errtel' L 1;111 =utt (When separated from the attached report, this memorandum may be publicly released.) Department of Energy Washington, DC 20585 November 7, 2014 MEMORANDUMFORTHESECRETARY ~~-~- FROM: Gregory H. Friedman SUBJECT: BACKGROUND Inspector General INFORMATION: Special Inquiry on "Alleged Attempts by

  4. U.S. Department of Energy Office of Inspector General

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    This rt is the property of the Office of Inspector General and is for OFFICIAL USE Appropriate safeguards should be pro * DOE/IG-0927 November 2014 lf'llltil:\L 15181!!! 8fll!Y SFFISUcL USI C fib f (When separated from the attached report, this memorandum may be publicly released.) Department of Energy Washington, DC 20585 November 7, 2014 MEMORANDUM FOR THE SECRETARY ~~ FROM: Gregory H. Friedman SUBJECT: BACKGROUND Inspector General INFORMATION: Special Inquiry on "Alleged Attempts by

  5. Reporting Fraud, Waste and Abuse to the Office of Inspector General...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    221.1A, Reporting Fraud, Waste and Abuse to the Office of Inspector General by Tara Porter Functional areas: Auditing, Office of Inspector General, The order sets forth...

  6. U.S. Department of Energy Office of Inspector General Semiannual Report

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    U.S. Department of Energy Office of Inspector General Semiannual Report to Congress April 1, 2015 - September 30, 2015 DOE/IG-0069 Energy Inspector General April 1, 2015 - September 30, 2015 Semiannual Report to Congress Page | 1 TABLE OF CONTENTS Farewell Message from Inspector General Friedman .................................................................... 2 Results at a Glance ........................................................................................... 3 Positive Outcomes

  7. DOE/IG-0067 U.S. Department of Energy Office of Inspector General

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    67 U.S. Department of Energy Office of Inspector General Semiannual Report to Congress October 1, 2014 - March 31, 2015 Energy Inspector General October 1, 2014 - March 31, 2015 Semiannual to Congress Page | 1 TABLE OF CONTENTS Message from the Inspector General ............................................... 2 Results at a Glance ........................................................................................... 3 Positive Outcomes

  8. U.S. Department of Energy Office of Inspector General

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Texas State Energy Conservation Office  Energy Efficiency and Conservation Block Grant Program Funds Provided by the American Recovery and Reinvestment Act of 2009 OAS-RA-13-13 February 2013 Department of Energy Washington, DC 20585 February 21, 2013 MEMORANDUM FOR THE PROGRAM MANAGER, WEATHERIZATION AND INTERGOVERNMENTAL PROGRAM, OFFICE OF ENERGY EFFICIENCY AND RENEWABLE ENERGY FROM: Jack Rouch, Director Central Audits Division Office of Inspector General SUBJECT: INFORMATION: Examination

  9. U.S. Department of Energy Office of Inspector General

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    FFIEIAL ~SE 9NLV U.S. Department of Energy Office of Inspector General Office of Audits and Inspections INSPECTION REPORT Alleged Fraud, Waste, Abuse and (b)(6),(b)(7)(C) Mismanagement at the Site Office -*. . _, .. . - ' - - - - - ,_ . - *- - - .. _ * 4 ~r....-* -r-* ,_,._ ... - *~ -- - ---* ..... r - * *- - µ1 t ti ti 11! I ± Id h ! l't ** Jt1i1µ1 l ! t tFEt t g; gff th I I . ~ ' - . I ~111 I Ii 11 ti B~, iilii~hl Ii; 1 liiitil !i iiiii! I I II I lil. 111 111, i'll i111 i i § !li!i~IU

  10. U.S Department of Energy Office of Inspector General FOR IMMEDIATE RELEASE

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Office of Inspector General FOR IMMEDIATE RELEASE October 21, 2015 The U.S. Department of Energy, Office of Inspector General is pleased to announce that an inquiry we initiated into a 2014 nuclear waste incident at the Department of Energy's Waste Isolation Pilot Plant has won a Council of Inspectors General on Integrity and Efficiency Award. Our employees who worked on this inquiry - * David Sedillo, Director of Western Audits Division * Aldric Hill, Assistant Director of

  11. U.S. Departmetn of Energy, Office of Inspector General, Annaul Peformance

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Report FY 2009, Annual Performance Plan Fy 2010 | Department of Energy U.S. Departmetn of Energy, Office of Inspector General, Annaul Peformance Report FY 2009, Annual Performance Plan Fy 2010 U.S. Departmetn of Energy, Office of Inspector General, Annaul Peformance Report FY 2009, Annual Performance Plan Fy 2010 I am pleased to present the Office of Inspector General's combined Fiscal Year 2009 Annual Performance Report and Fiscal Year 2010 Annual Performance Plan. On February 17, 2009, the

  12. DOE Office of Inspector General Audit Report "The Department of Energy's

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Management of Contractor Fines, Penalties and Legal Costs" | Department of Energy Office of Inspector General Audit Report "The Department of Energy's Management of Contractor Fines, Penalties and Legal Costs" DOE Office of Inspector General Audit Report "The Department of Energy's Management of Contractor Fines, Penalties and Legal Costs" Please review the attached DOE Office of Inspector General Audit Report "The Department of Energy's Management of Contractor

  13. U.S. Departmetn of Energy, Office of Inspector General, Annaul...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    I am pleased to present the Office of Inspector General's combined Fiscal Year 2009 Annual Performance Report and Fiscal Year 2010 Annual Performance Plan. On February 17, 2009, ...

  14. Office of Inspector General fiscal year 1996 annual work plan

    SciTech Connect (OSTI)

    1995-10-01

    This FY 1996 Office of Inspector General (OIG) Annual Work Plan is a summary and distillation of information contained in annual work plans, and includes audits and inspections that are carried over from FY 1995 as well as audits and inspections scheduled to start during FY 1996. Audits and inspections included in this consolidated OIG Annual Work Plan will be performed by OIG staff. Specialized expertise available through a Certified Public Accounting firm will be used to assist in auditing the Department`s financial statements. As part of the OIG Cooperative Audit Strategy, additional audit coverage of the Department`s programs is provided by internal auditors of the Department`s integrated contractors. Through the Cooperative Audit Strategy, the OIG ensures that the internal auditors satisfy audit standards, provides planning guidance to the internal auditors, coordinates work to avoid duplication, and tracks the work of internal auditors to ensure that needed audits are performed. Applicable portions of the four annual work plans issued for Fiscal Year 1996 by the Deputy/Assistant Inspectors General have been combined to form a major part of this overall OIG Annual Work Plan. Also included are portions of the most recent OIG Semiannual Reports to Congress to give an overview of the OIG`s mission/organization, resource status, and the environment in which the OIG currently operates. The OIG Annual Work Plan also lists ongoing and planned audits and inspections, and it presents investigative statistics which have been previously reported in the two OIG Semiannual Reports to Congress which cover Fiscal Year 1995. Furthermore, included in this work plan are descriptions of several innovations developed by the OIG to streamline its operations and to conserve as much efficiency and economy as possible in a time of resource reductions.

  15. Analysis of Open Office of Inspector General Recommendations, OAS-L-08-07 |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Analysis of Open Office of Inspector General Recommendations, OAS-L-08-07 Analysis of Open Office of Inspector General Recommendations, OAS-L-08-07 In December 2007, Congressman Henry A. Waxman, Chairman of the Committee on Oversight and Government Reform, requested that the Office of Inspector General examine information related to recommendations issued after January 1, 200 1, that had not been implemented by the Department. This was part of a government-wide effort.

  16. Inspector General Semiannual Report to Congress, April 1, 2011 - September 30, 2011

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    SEMIANNUAL REPORT TO CONGRESS Table of Contents Message from the Inspector General . . . . . . . . . . . . . . . . . . . . . . . . . 2 Key Accomplishments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Implementation of the American Recovery and Reinvestment Act of 2009 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Other Significant Audits, Inspections, and Reviews . . . . . . . . . . . . 18 Investigative Outcomes . . . . . . . . . . . . . . . . .

  17. Special Report U.S. Department of Energy Office of Inspector General

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Resolution of Significant Finding Investigation Recommendations DOE/IG- November 2002 U.S. Department of Energy Office of Inspector General Office of Audit Services Management Challenges at the Department of Energy DOE/IG-0667 November 2004

  18. Statement of Gregory H. Friedman Inspector General U.S. Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Statement of Gregory H. Friedman Inspector General U.S. Department of Energy Before the Subcommittee on Oversight and Investigations Committee on Energy and Commerce U.S. House of ...

  19. Reporting Fraud, Waste and Abuse to the Office of Inspector General

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2008-04-19

    The order sets forth requirements and responsibilities for reporting fraud, waste, abuse, misuse, corruption, criminal acts, or mismanagement to the DOE Office of Inspector General. Supersedes DOE O 221.1.

  20. U. S. Department of Energy Office of Inspector General FY 2015 Performance Report

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Office of Inspector General FY 2015 Performance Report FYs 2016 & 2017 Performance Plan Energy OIG Annual Performance Report FY 2015 Annual Performance Plan FYs 2016 & 2017 Page i Table of Contents Page Message from the Acting Inspector General ii At a Glance: Performance Results for FY 2015 iii Overview 1 Our Organization 2 External Factors Challenging Our Organization 4 Our Management Challenges 4 Measuring Our Performance 5 Appendix A 8 Audit Work Plan for FY 2016 8 Inspection Work

  1. Deputy Inspector General for audit services. FY 1998 annual performance plan

    SciTech Connect (OSTI)

    1997-09-30

    This plan outlines the audie strategies that the Deputy Inspector General for Audit Services intends to implement and execute in Fiscal Year (FY) 1998. The plan also includes the details of efforts to improve customer service and to implement the Inspector General`s streamlining initiatives. The FY 1997/1998 Strategic Plan emphasizes six key issue areas: Financial Management, Contract Administration, Program Management, Environmental Quality, Infrastructure and Administrative Safeguards. These issue areas were chosen to ensure that the Inspector General`s audit, inspection, and investigative functions are focused to assist the Department to reach its goals, pursue its strategies, and monitor its success indicators. This plan also establishes goals, objectives, and performance measures, which are discussed in detail in Appendix I.

  2. Semiannual report to Congress on Inspector General audit reports: October 1, 1995--March 31, 1996

    SciTech Connect (OSTI)

    1996-05-01

    This is the Secretary of Energy`s fourteenth Semiannual Report to Congress submitted under the Inspector General Act of 1978, as amended. Pursuant to the Inspector General Act Amendments of 1988 (Public Law 100-504), agency heads are to report to Congress on the status of final action taken on audit report recommendations. This report complements a report prepared by the Department`s Office of Inspector General that provides information on audit reports issued during the period and on the status of management decisions made on Inspector General audit reports. During the period covered by this report, October 1, 1995, through March 31, 1996, the Department took final action on 35 operational, financial, and preaward audit reports. At the end of the period 92 reports awaited final action. Final action was taken on two contract and financial assistance audits, leaving two reports requiring final action at the end of the period. This report has three sections. The first section outlines significant audit resolution and followup accomplishments achieved by the Department during the reporting period. The second section contains the statistical tables that illustrate the status of final action on Inspector General audit reports. The third lists the audit reports that are one year or more past management decision and have not completed final action. This section also provides the status of corrective actions on each of these reports.

  3. Semiannual report to Congress on Inspector General audit reports, April 1--September 30, 1996

    SciTech Connect (OSTI)

    1996-11-01

    This is the Secretary of Energy`s fifteenth Semiannual Report to Congress submitted under the Inspector General Act of 1978, as amended. Pursuant to the Inspector General Act Amendments of 1988 (Public Law 100-504), agency heads are to report to Congress on the status of final action taken on audit report recommendations. This report complements a report prepared by the Department`s Office of Inspector General that provides information on audit reports issued during the period and on the status of management decisions made on Inspector General audit reports. During the period covered by this report, April 1, 1996, through September 30, 1996, the Department took final action on 34 operational, financial, and preaward audit reports. At the end of the period 87 reports awaited final action. Final action was taken on seven contract and financial assistance audits, leaving two reports requiring final action at the end of the period. This report has three sections. The first section outlines significant audit resolution and followup accomplishments achieved by the Department during the reporting period. The second section contains the statistical tables that illustrate the status of final action on Inspector Generator audit reports. The third lists the audit reports that are one year or more past management decision and have not completed final action. This section also provides the status of corrective action on each of these reports.

  4. Office of Inspector General semiannual report to Congress, October 1, 1996--March 31, 1997

    SciTech Connect (OSTI)

    1997-04-01

    This Office of Inspector General Semiannual Report to the Congress covers the period from October 1, 1996, through March 31, 1997. The report summarizes significant audit, inspection, and investigative accomplishments for the reporting period which facilitated Department of Energy management efforts to improve management controls and ensure efficient and effective operation of its programs. Narratives of the most significant reports are grouped by measures which the Office of Inspector General uses to gauge its performance. The common thread that ties the performance measures together is their emphasis on supporting Department efforts to produce high quality products at the lowest possible cost to the taxpayer. Five such performance measures were used during this semiannual period to present outcomes of Office of Inspector General work in terms of improvements in Department programs and operations.

  5. AAAAAAAAAAAAAAA U.S. Department of Energy Office of Inspector General

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    U.S. Department of Energy Office of Inspector General Office of Audit Services Summary Special Report Management of the Clean Cities Conference This document provides a summary of a Special Report that is not publicly releasable. It is controlled pursuant to the Freedom of Information Act. OAS-SR-06-01 October 2005

  6. Special Report U.S. Department of Energy Office of Inspector General

    Office of Environmental Management (EM)

    Resolution of Significant Finding Investigation Recommendations DOE/IG- November 2002 U.S. Department of Energy Office of Inspector General Office of Audit Services Management Challenges at the Department of Energy DOE/IG-0667 November 2004

  7. Reporting Fraud, Waste, and Abuse to the Office of Inspector General

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2001-03-22

    To establish policies and procedures for reporting fraud, waste, abuse, misuse, corruption, criminal acts, or mismanagement to the Department of Energy (DOE), Office of Inspector General (OIG). Cancels DOE 2030.4B. Canceled by DOE O 221.1A, 8-19-08.

  8. TESTIMONY OF WILLIAM S. MAHARAY DEPUTY INSPECTOR GENERAL FOR AUDIT SERVICES

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    TESTIMONY OF WILLIAM S. MAHARAY DEPUTY INSPECTOR GENERAL FOR AUDIT SERVICES U.S. DEPARTMENT OF ENERGY WASHINGTON D.C. BEFORE THE SUBCOMMITTEE ON GOVERNMENT MANAGEMENT, ORGANIZATION AND PROCUREMENT COMMITTEE ON OVERSIGHT AND GOVERNMENT REFORM U.S. HOUSE OF REPRESENTATIVES MARCH 20,2007 Mr. Chairman and members of the Subcommittee, I am pleased to be here at your request to testify on issues associated with the FY 2005 and 2006 Audits of the Department of Energy's Financial Statements. Over the

  9. OFFICE OF INSPECTOR GENERAL U.S. Department of Energy Southwestern Federal Power

    Energy Savers [EERE]

    Energy OFFICE OF ENVIRONMENTAL MANAGEMENT (EM) ORGANIZATION CHART OFFICE OF ENVIRONMENTAL MANAGEMENT (EM) ORGANIZATION CHART OFFICE OF ENVIRONMENTAL MANAGEMENT (EM) ORGANIZATION CHART Download Printable Version Mission & Functions Statement for the Office of Environmental Management

    OFFICE OF INSPECTOR GENERAL U.S. Department of Energy Southwestern Federal Power System's Fiscal Year 2015 Financial Statement Audit AUDIT REPORT OAI-FS-16-10 August 2016 Department of Energy Washington,

  10. Inspector General

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Principle

  11. Inspector General

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Principal

  12. Beport No. U.S. Department of Energy November 1995 INS-0-96-02 Office of Inspector General

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Beport No. U.S. Department of Energy November 1995 INS-0-96-02 Office of Inspector General Report on Selected Concerns Regarding Property Accountability at the Continuous Electron Beam Accelerator Facility i ^ ^ j\ _)"^ - B^ ^^^B __iv^^< '. **'_-J \-- % ^^\ D E--/ U.S..DEPARTMENT OF ENERGY OFFICE OF INSPECTOR GENERAL SELECTED CONCERNS REGARDING PROPERTY ACCOUNTABILITY AT THE CONTINUOUS ELECTRON BEAM ACCELERATOR FACILITY Report No. INS-0-96-02 Office of Inspections Date Issued: November

  13. United States Government Department of Energy Memorandum OFFICE OF INSPECTOR GENERAL

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    28/07 10:24 FAX 301 903 4656 CAPITAL REGION [a 002 DOE F 1325.8 (08-93) United States Government Department of Energy Memorandum OFFICE OF INSPECTOR GENERAL DATE: November 28, 2007 REPLY TO ATTN OF: IG-34 (A07TG029) . Audit Report No.: OAS-L-08-02 SUBJECT: Report on "Department's Implementation of the Strateg:ic Integrated Procurement Enterprise System - Overall Project Planning" TO: Chief Financial Officer, CF-1 INTRODUCTION AND OBJECTIVE On September 28, 2007, we issued a report on

  14. Inspector General Semiannual Report to Congress - October 1, 2008 - March 31, 2009

    SciTech Connect (OSTI)

    2008-10-01

    On behalf of the Department of Energy's Office of Inspector General, I am pleased to submit our Semiannual Report to Congress for the period ending March 31, 2009. The Report highlights key accomplishments of the Office of Inspector General, particularly pertaining to our efforts to ensure the economy, efficiency, and effectiveness of Department of Energy operations. Details pertaining to some of our most significant reviews and projects are presented in the Report. This reporting period has been quite eventful. On February 17, 2009, the President signed the American Recovery and Reinvestment Act of 2009. The stated intent of this new legislation is to strengthen the U.S. economy through the creation of new jobs, aiding State and local governments with budget shortfalls, cutting taxes for working families, and investing in the long-term health of the Nation's economic prosperity. The Recovery Act establishes the status of the Nation's energy supply as a prime focus. Specifically, the Department of Energy will receive approximately $40 billion for various energy, environmental, and science programs and initiatives. The passage of this legislation makes the coming months an exciting and transformative time for the Department of Energy and the Office of Inspector General. In recognition of the need for effective oversight to protect taxpayer interests, the Recovery Act includes the creation of the Recovery Act Accountability and Transparency Board and mandates specific actions by the Inspectors General. I will be a permanent member of this newly created Board, along with nine other Inspectors General whose agencies are significant recipients of Recovery Act funds. Since the passage of the legislation, my office has developed a strategy consistent with the objectives outlined in the Recovery Act. The overarching goal of the strategy is to ensure that the taxpayers interests relating to the performance and results of the Recovery Act are protected. During this reporting

  15. Office of Inspector General Strategic Plan Fiscal Years 2009 through 2013

    SciTech Connect (OSTI)

    None

    2008-10-01

    The Department of Energy (Department) Organization Act created the Department in October 1977. That law brought together for the first time, not only most of the government's energy programs, but also science and technology programs and defense responsibilities that included the design, construction, and testing of nuclear weapons. Over its history, the Department has shifted its emphasis and focus as the energy and security needs of the Nation have changed. Today, the Department stands at the forefront of helping the Nation meet our energy, scientific, environmental, and national security goals. The responsibility of the Office of Inspector General (OIG) is to ensure that the Department is: Fulfilling its program and operational goals effectively; Using its resources efficiently in this pursuit; Operating within the scope of its legislative mandates; Meeting the President's Management Agenda; and, Addressing Departmental priorities established by the Secretary. The OIG accomplishes this by performing audits, investigations, and inspections of the Department's programs and operations seeking to uncover existing or potential weaknesses that could result in fraud, waste, and abuse. This strategic plan reflects the vision for how the organization will move forward in the 21st century to ensure the Department continues to serve the American public safely, effectively, and efficiently. Through its strategic planning efforts, the OIG will continue to play a critical role in assisting the Department's leadership and the Congress by identifying opportunities for improving management, program performance, and accountability. The OIG's strategic goal is to perform a robust review program that provides timely, relevant performance information and recommendations to improve the performance of the Department's programs and operations, facilitate positive change, and combat unlawful activities within the Department.

  16. Statement by Secretary Bodman in Response to the Inspector General's Report on "Selected Controls over Classified Information at the Los Alamos National Laboratory"

    Broader source: Energy.gov [DOE]

    "On October 26, 2006, I requested the Department's Inspector General (IG) to investigate a number of matters which led to the unauthorized removal of classified materials from the Los Alamos...

  17. Office of Inspector General audit report on the U.S. Department of Energy`s consolidated financial statements for fiscal year 1998

    SciTech Connect (OSTI)

    1999-02-01

    The Department prepared the Fiscal Year 1998 Accountability Report to combine critical financial and program performance information in a single report. The Department`s consolidated financial statements and the related audit reports are included as major components of the Accountability Report. The Office of Inspector General audited the Department`s consolidated financial statements as of and for the years ended September 30, 1998 and 1997. In the opinion of the Office of Inspector General, except for the environmental liabilities lines items in Fiscal year 1998, these financial statements present fairly, in all material respects, the financial position of the Department as of September 30, 1998 and 1997, and its consolidated net cost, changes in net position, budgetary resources, financing activities, and custodial activities for the years then ended in conformity with Federal accounting standards. In accordance with Government Auditing Standards, the Office of Inspector General issued a separate report on the Department internal controls. This report discusses needed improvements to the environmental liabilities estimating process and the reporting of performance measure information.

  18. ENCLOSURE I

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ENCLOSURE I 0 - i L I 2 j - i i m p L a s t B 0 2 A a f f O D H T C S v i a - - - - - - E n P i L P 1 1 I t I I i i I I 9 : I I I f % r a t o 3 0 I F I s a n I i m a a C...

  19. OFFICE OF INSPECTOR GENERAL

    Energy Savers [EERE]

    number of younger employees 35 leads to concerns about succession planning and the infusion of new ideas and sustaining technical capabilities. In addition, some of the...

  20. OFFICE OF INSPECTOR GENERAL

    Office of Environmental Management (EM)

    ... CENTERS A03SR019 SAVANNAH RIVER SITE MEDICAL SERVICES A03SR020 PERFORMANCE BASED ... Audits A03FN001 DOE - FY 2003 A03FN002 ISOTOPE PRODUCTION DISTRIBUTION - FY 2003 ...

  1. ENCLOSURE I

    Office of Legacy Management (LM)

    ENCLOSURE I 1 UNITED STATES ENERGY RESEARCH AND DEVELOPMENT ADMINISTRATION OAK RIDGE OPERATIONS P. 0. BOX E OAK RIDGE.TENNESSEE 37830 2' ., ' _ ::. .:' !' March 7, 1977 Assistant DireCtor for Health Protection, DSSC-HQ ATTN: R. H. Kennedy, DSSC-HQ ERDA RESURVEY PROGRAM - AMERICAN BRASS, WATERBIJRY,,CONNBCTICUTT By memorandum from E. K. Loop to W. H. Travis dated May 4, 1976, a site/, identified as "Pmericen Brass Company, Watertown, Massachusetts" was assigned to OR for review. Our

  2. Material containment enclosure

    DOE Patents [OSTI]

    Carlson, David O.

    1993-01-01

    An isolation enclosure and a group of isolation enclosures useful when a relatively large containment area is required. The enclosure is in the form of a ring having a section removed so that a technician may enter the center area of the ring. In a preferred embodiment, an access zone is located in the transparent wall of the enclosure and extends around the inner perimeter of the ring so that a technician can insert his hands into the enclosure to reach any point within. The inventive enclosures provide more containment area per unit area of floor space than conventional material isolation enclosures.

  3. Inspector | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Inspector Inspector Inspector Responsibilities The Office of Inspections is responsible for conducting reviews of management issues and administrative allegations. OIG inspectors gather data through various sources, such as interviews, document reviews, and computer searches; review and analyze the data; and report on their findings regarding complex programs, projects, and issues that involve both the Federal Government and private industry. Inspection topics may be based upon requests from

  4. Inspector for Data Races

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Inspector for Data Races Inspector for Data Races Intel Inspector is a memory and threading error checking tool for users developing serial and multithreaded applications. Intel Inspector offers: Visibility into individual problems, problem occurrences, and call stack information. Interactive debugging capability. On-demand memory leak detection. Memory growth measurement to help ensure that the application uses no more memory than expected. Data race, deadlock, lock hierarchy violation, and

  5. Material isolation enclosure

    DOE Patents [OSTI]

    Martell, Calvin J.; Dahlby, Joel W.; Gallimore, Bradford F.; Comer, Bob E.; Stone, Water A.; Carlson, David O.

    1993-01-01

    An enclosure similar to a glovebox for isolating materials from the atmosphere, yet allowing a technician to manipulate the materials and also apparatus which is located inside the enclosure. A portion of a wall of the enclosure is comprised of at least one flexible curtain. An opening defined by a frame is provided for the technician to insert his hands and forearms into the enclosure. The frame is movable in one plane, so that the technician has access to substantially all of the working interior of the enclosure. As the frame is moved by the technician, while he accomplishes work inside the enclosure, the curtain moves such that the only opening through the enclosure wall is the frame. In a preferred embodiment, where a negative pressure is maintained inside the enclosure, the frame is comprised of airfoils so that turbulence is reduced, thereby enhancing material retention within the box.

  6. Material isolation enclosure

    DOE Patents [OSTI]

    Martell, C.J.; Dahlby, J.W.; Gallimore, B.F.; Comer, B.E.; Stone, W.A.; Carlson, D.O.

    1993-04-27

    An enclosure is described, similar to a glove box, for isolating materials from the atmosphere, yet allowing a technician to manipulate the materials and also apparatus which is located inside the enclosure. A portion of a wall of the enclosure is comprised of at least one flexible curtain. An opening defined by a frame is provided for the technician to insert his hands and forearms into the enclosure. The frame is movable in one plane, so that the technician has access to substantially all of the working interior of the enclosure. As the frame is moved by the technician, while he accomplishes work inside the enclosure, the curtain moves such that the only opening through the enclosure wall is the frame. In a preferred embodiment, where a negative pressure is maintained inside the enclosure, the frame is comprised of airfoils so that turbulence is reduced, thereby enhancing material retention within the box.

  7. Office of Inspector General report on Naval Petroleum Reserve Number 1, independent accountant`s report on applying agreed-upon procedures

    SciTech Connect (OSTI)

    1998-12-01

    On October 6, 1997, the Department of Energy (DOE) announced it had agreed to sell all of the Government`s interest in Naval Petroleum Reserve Number 1 (NPR-1) to Occidental Petroleum Corporation for $3.65 billion. This report presents the results of the independent certified public accountants` agreed-upon procedures work on the Preliminary Settlement Statement of the Purchase and Sale Agreement between DOE and Occidental. To fulfill their responsibilities, the Office of Inspector General contracted with the independent public accounting firm of KPMG Peat Marwick LLP to conduct the work for them, subject to their review. The work was done in accordance with the Statements on Standards for Attestation Engagements issued by the American Institute of Certified Public Accountants. As such, the independent certified public accountants performed only work that was agreed upon by DOE and Occidental. This report is intended solely for the use of DOE and Occidental and should not be used by those who have not agreed to the procedures and taken responsibility for the sufficiency of the procedures for their purposes. However, this report is a matter of public record, and its distribution is not limited. The independent certified public accountants identified over 20 adjustments to the Preliminary Settlement Statement that would result in a $10.8 million increase in the sale price.

  8. Drill string enclosure

    DOE Patents [OSTI]

    Jorgensen, Douglas K.; Kuhns, Douglass J.; Wiersholm, Otto; Miller, Timothy A.

    1993-01-01

    The drill string enclosure consists of six component parts, including; a top bracket, an upper acrylic cylinder, an acrylic drill casing guide, a lower acrylic cylinder, a bottom bracket, and three flexible ducts. The upper acrylic cylinder is optional based upon the drill string length. The drill string enclosure allows for an efficient drill and sight operation at a hazardous waste site.

  9. Drill string enclosure

    DOE Patents [OSTI]

    Jorgensen, D.K.; Kuhns, D.J.; Wiersholm, O.; Miller, T.A.

    1993-03-02

    The drill string enclosure consists of six component parts, including; a top bracket, an upper acrylic cylinder, an acrylic drill casing guide, a lower acrylic cylinder, a bottom bracket, and three flexible ducts. The upper acrylic cylinder is optional based upon the drill string length. The drill string enclosure allows for an efficient drill and sight operation at a hazardous waste site.

  10. Modular, security enclosure and method of assembly

    DOE Patents [OSTI]

    Linker, Kevin L.; Moyer, John W.

    1995-01-01

    A transportable, reusable rapidly assembled and disassembled, resizable modular, security enclosure utilizes a stepped panel construction. Each panel has an inner portion and an outer portion which form joints. A plurality of channels can be affixed to selected joints of the panels. Panels can be affixed to a base member and then affixed to one another by the use of elongated pins extending through the channel joints. Alternatively, the base member can be omitted and the panels themselves can be used as the floor of the enclosure. The pins will extend generally parallel to the joint in which they are located. These elongated pins are readily inserted into and removable from the channels in a predetermined sequence to allow assembly and disassembly of the enclosure. A door constructed from panels is used to close the opening to the enclosure.

  11. CXD_4603, Enclosure Modification Project (4603)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Enclosure Modification Project (4603) Y-12 Site Office Oak Ridge, Anderson County, Tennessee The proposed action is to convert the temporary enclosure to a permanent enclosure....

  12. Enclosures STC Stakeholder Meeting Presentation

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Enclosures STC Residential Energy Efficiency Stakeholder Meeting Wednesday, February 29, 2012 - Austin, Texas Residential Energy Efficiency Stakeholder Meeting Wednesday, February ...

  13. Enclosure II June

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Enclosure II June 10,2010 Hanford Radiological Health and Safety Document 1 Forward The Richland Operations Office and the Office of River Protection have established a supplemental set of contractual requirements and an expectation that the contractor organizations establish the mechanisms necessary to maintain site consistency, optimize site-wide radiological programs to provide an overall benefit to the government, and support DOE in the management oflong-term risks relative to radiological

  14. Enclosures STC Stakeholder Meeting Presentation

    Broader source: Energy.gov [DOE]

    This presentation outlines the goals of the Enclosures Standing Technical Committee, as presented at the Building America Spring 2012 Stakeholder meeting on February 29, 2012, in Austin, Texas.

  15. Enclosures Standing Technical Committee Strategic Plan report...

    Energy Savers [EERE]

    Enclosures Standing Technical Committee Strategic Plan report Enclosures Standing Technical Committee Strategic Plan report This report outlines the research path for increasing ...

  16. Intel® Inspector XE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Inspector XE 2013 Memory Checker Thread Checker Static Analysis Pointer Checker Copyright© 2012, Intel Corporation. All rights reserved. *Other brands and names are the property of their respective owners. Dynamic Analysis Memory Errors Static Analysis Code & Security Errors Deliver More Reliable Applications Intel ® Inspector XE and Intel ® Parallel Studio XE family of suites 2 Find errors earlier with less effort Threading Errors Static Analysis & Pointer Checker are only available

  17. Cold Climate Building Enclosure Solutions

    Office of Scientific and Technical Information (OSTI)

    Enclosure Solutions Jan Kosny, Ali Fallahi, and Nitin Shukla Fraunhofer CSE January 2013 NOTICE This report was prepared as an account of work sponsored by an agency of the...

  18. Protocol, Test Inspectors Guide - March 2008 | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Test Inspectors Guide - March 2008 Protocol, Test Inspectors Guide - March 2008 March 2008 Emergency Management Limited Scope Performance Test Inspectors Guide This Emergency...

  19. Quality Control Inspector: Different Programs, Different Responsibilities

    Broader source: Energy.gov [DOE]

    This document explains the role of the Quality Control Inspector (QCI) in regards to the Home Energy Professional Certification Exam.

  20. Building America High Performance Enclosure Strategies: Part...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Thermal Enclosure Thermal Enclosure Thermal Encl. Thermal Encl. Low-Load Eff. HVAC Low-Load Eff. HVAC Water Man. Water Man. Eff. Comps MEL's Eff. Comps. MEL's Ventilat'nIAQ ...

  1. Report Fraud to the Inspector General

    Broader source: Energy.gov [DOE]

    The Department of Energy is strongly committed to effective program oversight, including allegations of fraud. The Department takes such allegations seriously and is committed to keeping the public...

  2. Sealed head access area enclosure

    DOE Patents [OSTI]

    Golden, Martin P.; Govi, Aldo R.

    1978-01-01

    A liquid-metal-cooled fast breeder power reactor is provided with a sealed head access area enclosure disposed above the reactor vessel head consisting of a plurality of prefabricated structural panels including a center panel removably sealed into position with inflatable seals, and outer panels sealed into position with semipermanent sealant joints. The sealant joints are located in the joint between the edge of the panels and the reactor containment structure and include from bottom to top an inverted U-shaped strip, a lower layer of a room temperature vulcanizing material, a separator strip defining a test space therewithin, and an upper layer of a room temperature vulcanizing material. The test space is tapped by a normally plugged passage extending to the top of the enclosure for testing the seal or introducing a buffer gas thereinto.

  3. Cold Climate Building Enclosure Solutions

    SciTech Connect (OSTI)

    Kosny, Jan; Fallahi, Ali; Shukla, Nitin

    2013-01-01

    This project investigates the energy performance and cost effectiveness of several state-of-the-art retrofit strategies that could be used in triple-deckers and colonial houses, common house types in New England. Several emerging building enclosure technologies were integrated, including high R-value aerogel and vacuum insulations, in forms that would be energy efficient, flexible for different retrofit scenarios, durable, and potentially cost-competitive for deep energy retrofits.

  4. NREL Job Task Analysis: Quality Control Inspector

    SciTech Connect (OSTI)

    Kurnik, C.; Woodley, C.

    2011-05-01

    A summary of job task analyses for the position of quality control inspector when evaluating weatherization work that has been done on a residence.

  5. Quality Control Inspector: Different Programs, Different Responsibilit...

    Broader source: Energy.gov (indexed) [DOE]

    More Documents & Publications QCI Exam Test-Taking Tips from Community Housing Partners (CHP) Assorted QCI Tips and Standards Review Quality Control Inspector (QCI) Pre-Exam Quiz...

  6. Inspector

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Nuclear Security Administration | (NNSA) Insider Threat to Nuclear and Radiological Materials: Fact Sheet March 23, 2012 Almost all known cases of theft of nuclear material involved an insider. The threat of a nuclear facility insider, either individually or in collusion with an outsider, stealing fissile material or committing sabotage at a nuclear facility is a difficult one to accept and prevent. The skills, knowledge, access, and authority held by some insiders make the threat difficult

  7. Enclosures Standing Technical Committee Strategic Plan report

    Broader source: Energy.gov [DOE]

    This report outlines the research path for increasing energy efficiency of building enclosures, as identified by the Building America Standing Technical Committee; updated Feb. 2012.

  8. Building America Webinar: High Performance Enclosure Strategies...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Strategies: Part II, New Construction - August 13, 2014 - Introduction This presentation is the Introduction to the Building America webinar, High Performance Enclosure Strategies...

  9. Building America Webinar: High Performance Enclosure Strategies...

    Broader source: Energy.gov (indexed) [DOE]

    performance of the building enclosure, reduce the cost of energy-efficient construction, and simplify the construction process, all while accommodating higher levels of insulation. ...

  10. Building America Webinar: High Performance Enclosure Strategies...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    High Performance Enclosure Strategies, Part II, on August 13, 2014. BAwebinarbscbaker81314.pdf (1.03 MB) More Documents & Publications Cladding Attachment Over Thick ...

  11. Building America Webinar: High Performance Building Enclosures...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building America Webinar: High Performance Building Enclosures: Part I, Existing Homes The webinar, presented on May 21, 2014, focused on specific Building America projects that ...

  12. Working with Real Estate Home Inspectors, Exterminators, and...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Real Estate Home Inspectors, Exterminators, and Other "Nontraditional" Partners Working with Real Estate Home Inspectors, Exterminators, and Other "Nontraditional" Partners Better ...

  13. Working with Real Estate Home Inspectors, Exterminators, and...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Working with Real Estate Home Inspectors, Exterminators, and Other "Nontraditional" Partners Working with Real Estate Home Inspectors, Exterminators, and Other "Nontraditional"...

  14. Enclosure

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DAU Strategic Sourcing Overview CLC108: This course provides an overview of Strategic Sourcing concepts and techniques for helping organizations begin to make the shift from ...

  15. NREL Job Task Analysis: Quality Control Inspector | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Quality Control Inspector NREL Job Task Analysis: Quality Control Inspector A summary of job task analyses for the position of quality control inspector when evaluating weatherization work that has been done on a residence. NREL Job Task Analysis: Quality Control Inspector (332.56 KB) More Documents & Publications Training Self-Assessment Preparing for the Quality Control Inspector Certification Exam NREL Job Task Analysis: Energy Auditor

  16. Enclosures Standing Technical Committee Strategic Plan report

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Enclosures Standing Technical Committee Strategic Plan, v2011a Revised: December 2011 Committee Chair: 2011 Joseph Lstiburek Kohta Ueno Katie Boucher Building Science Corporation i Contents List of Figures ............................................................................................................................................. ii List of Tables

  17. Quality Control Inspector: Different Programs, Different Responosibilities

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Quality Control Inspector: Different Programs, Different ResponsibiliDes. A Guide to the JTA So& Skills. Inspects implementaDon of the program. þ þ Documents areas needing improvement in report. þ þ May assure homeowners/clients of follow---up work. ý þ Independent 3 rd party inspectors may be hired by an enDty not in a role to promise follow---up to clients or residents. Agency staff can and should assure clients of proper follow---up when appropriate. May address

  18. ZERH Webinar: Getting Enclosures Right in Zero Energy Ready Homes...

    Office of Environmental Management (EM)

    ZERH Webinar: Getting Enclosures Right in Zero Energy Ready Homes ZERH Webinar: Getting Enclosures Right in Zero Energy Ready Homes February 16, 2016 12:00PM to 1:15PM EST...

  19. Laboratory to demolish excavation enclosures at Material Disposal...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Excavation Enclosures At MDA B Laboratory to demolish excavation enclosures at Material Disposal Area B near DP Road Pre-demolition activities are beginning this week and the work...

  20. Opportunities to Apply Phase Change Materials to Building Enclosures

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Webinar | Department of Energy Opportunities to Apply Phase Change Materials to Building Enclosures Webinar Opportunities to Apply Phase Change Materials to Building Enclosures Webinar Slides from the Building America webinar on November 11, 2011. webinar_pcm_enclosures_20111111.pdf (2.99 MB) More Documents & Publications Building America Webinar: Opportunities to Apply Phase Change Materials to Building Enclosures Vehicle Technologies Office Merit Review 2016: ePATHS - electrical PCM

  1. Use of sustainability appraisal by English planning inspectors and judges

    SciTech Connect (OSTI)

    Therivel, Riki

    2013-01-15

    This article considers how sustainability appraisals (SA - an English form of SEA that also considers social and economic issues) are treated at the end of the plan-making process: by planning inspectors who review plans before they are adopted, and by judges in the case of legal challenge to plans and their SAs. It briefly describes the role of inspectors and judges, and how their decisions influence SA. It presents the conclusions of 81 planning inspectors' reports about local authority development plans and their SAs, including three cases where inspectors required further SA information and reasons given by inspectors for not challenging the legal adequacy of other SAs. The three main successful English legal challenges to SA are then summarised. Planning inspectors seemed prone, until recently, to not challenge even quite poor quality SAs. This seems to be changing in the wake of recent court judgements, and in turn is affecting planners' SA practice. However it is unclear whether these changes will affect only the procedural aspects of SA or also planners' and inspectors' 'hearts and minds'. - Highlights: Black-Right-Pointing-Pointer Inspectors tend to err in favour of the submitted plan, even where its sustainability or the quality of its SA is dubious. Black-Right-Pointing-Pointer In contrast to inspectors, judges seem to be taking a broad and rigorous view of SEA requirements. Black-Right-Pointing-Pointer Planners and inspectors are changing their behaviour to avoid legal challenge.

  2. Electrically shielded enclosure with magnetically retained removable cover

    DOE Patents [OSTI]

    Rivers, Craig J.; Lee, Roanne A.; Jones, Glenn E.

    1996-01-01

    Disclosed is an electrically shielded enclosure having electrical components therein and a removable electrically shielded cover over an opening in the enclosure with a magnetic securement mechanism provided to removably secure the cover to the enclosure in a manner which will provide easy access, yet also provide an electrical seal between the cover and the enclosure capable of preventing the passage of electrical radiation through the joint between the cover and the enclosure. Magnets are provided on the enclosure peripherally around the opening and facing the cover, and a ferromagnetic surface is provided on the mating surface of the cover facing the magnets, with a continuous electrical seal provided between the magnets and the ferromagnetic surface on the cover to prevent the leakage of electromagnetic radiation therethrough. In one embodiment the electrical seal includes a flexible metal casing or surface, which is attached to the enclosure and positioned between the magnets and the ferromagnetic surface on the cover, and which is sufficiently flexible to be capable of conforming to the ferromagnetic surface to provide an electrical seal between the cover and the enclosure. In another embodiment, the electrical seal includes a metal mesh associated with the enclosure and positioned between the magnets on the enclosure and the ferromagnetic surface on the cover. The metal mesh is also capable of conforming to the surface of the ferromagnetic surface to thereby provide an electrical seal between the cover and the enclosure.

  3. Limited-Notice Performance Test Inspectors Guide | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Limited-Notice Performance Test Inspectors Guide Limited-Notice Performance Test Inspectors Guide October 2014 This document describes the Limited-Notice Performance Testing Program employed by DOE's Office of Enterprise Assessments to evaluate DOE safeguards and security programs. This document is one in a series of Inspectors Guides used by the Office of Security Assessments, within DOE's Office of Enterprise Assessments (EA), to conduct Independent Oversight appraisals of safeguards and

  4. Preparing for the Quality Control Inspector Certification Exam | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Preparing for the Quality Control Inspector Certification Exam Preparing for the Quality Control Inspector Certification Exam This presentation, prepared by the Building Performance Center and the Washington Department of Commerce, identifies how individuals can better prepare for the Home Energy Professional Quality Control Inspector Certification Exam. preparing_for_the_qci_ exam_4_18_14.pptx (17.26 MB) More Documents & Publications QCI Exam Test-Taking Tips from Community

  5. Livermore scientist, engineers train to be inspectors for test...

    National Nuclear Security Administration (NNSA)

    scientist, engineers train to be inspectors for test ban treaty organization | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing...

  6. Methods and apparatus for measuring the tightness of enclosures

    DOE Patents [OSTI]

    Modera, Mark P.; Sherman, Max H.

    1987-01-13

    Disclosed are methods and apparatus for measuring tightness of an enclosure such as a building by utilizing alternating pressurization techniques. One method comprises providing apparatus capable of causing an internal volume change for the enclosure, the apparatus including a means for determining the instantaneous volume change, and a means for determining the instantaneous pressure within the enclosure. The apparatus is operated within the enclosure to change the volume thereof, and at least one of the frequency and the displacement is adjusted to achieve a root mean square pressure in the enclosure approximately equal to a reference pressure. At that pressure, the leakage of the enclosure is determined from the instantaneous displacement and instantaneous pressure values.

  7. Methods and apparatus for measuring the tightness of enclosures

    DOE Patents [OSTI]

    Modera, M.P.; Sherman, M.H.

    1987-01-13

    Disclosed are methods and apparatus for measuring tightness of an enclosure such as a building by utilizing alternating pressurization techniques. One method comprises providing apparatus capable of causing an internal volume change for the enclosure, the apparatus including a means for determining the instantaneous volume change, and a means for determining the instantaneous pressure within the enclosure. The apparatus is operated within the enclosure to change the volume thereof, and at least one of the frequency and the displacement is adjusted to achieve a root mean square pressure in the enclosure approximately equal to a reference pressure. At that pressure, the leakage of the enclosure is determined from the instantaneous displacement and instantaneous pressure values. 3 figs.

  8. Chemical inspectors: On the outside looking in

    SciTech Connect (OSTI)

    Smithson, A.E. )

    1991-10-01

    On July 15, the United States, supported by Britain, Australia, and Japan, proposed a new challenge inspection plan for the chemical weapons convention (CWC), which will prohibit the production, possession, use, and transfer of chemical weapons. The Bush administration claims this proposal has the same anytime, anywhere, with no right of refusal' challenge-inspection features George Bush first recommended in 1984 - as well as the latest in managed access,' aerial inspection, and use of sensing devices. But the proposal would let a challenged country stall for days without allowing inspectors to glimpse a suspected chemical-weapons site, and inspectors might never be able to step inside the gates of facilities where cheating is suspected. Countries considering joining the CWC must realize that the new US approach involves plenty of talk but little action. In fact, the US challenge-inspection plan falls so far short of the means needed to detect and deter prohibited activities that even Saddam Hussein and Muammar Khadafi may queue up to sign on the dotted line.

  9. Building America Webinar: Sealing of Home Enclosures with Aerosol Particles

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    | Department of Energy Sealing of Home Enclosures with Aerosol Particles Building America Webinar: Sealing of Home Enclosures with Aerosol Particles This webinar was presented by research team Building Industry Research Alliance (BIRA), and provided information about a project that uses existing aerosol duct sealing technology to seal the entire building enclosure in order to achieve greater airtightness and energy and cost savings. webinar_bira_20111014.wmv (11.57 MB) More Documents &

  10. Building America Webinar: High Performance Building Enclosures: Part I,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Existing Homes | Department of Energy High Performance Building Enclosures: Part I, Existing Homes Building America Webinar: High Performance Building Enclosures: Part I, Existing Homes The webinar, presented on May 21, 2014, focused on specific Building America projects that have implemented technical solutions to retrofit building enclosures to reduce energy use and improve durability. Presenters answered tough questions such as: How can builders deal with increasing exterior foundation

  11. DOE Announces Webinars on High Performance Enclosure Strategies...

    Energy Savers [EERE]

    for Buildings, Fuel Cell Forklifts and Energy Management, and More DOE Announces Webinars on High Performance Enclosure Strategies for Buildings, Fuel Cell Forklifts and Energy ...

  12. Building America Webinar: Sealing of Home Enclosures with Aerosol...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    about a project that uses existing aerosol duct sealing technology to seal the entire building enclosure in order to achieve greater airtightness and energy and cost savings. ...

  13. Temperature distribution and fluid flow in an enclosure with...

    Office of Scientific and Technical Information (OSTI)

    Temperature distribution and fluid flow in an enclosure with localized heating and cooling Citation Details In-Document Search Title: Temperature distribution and fluid flow in an ...

  14. ZERH Webinar: Getting Enclosures Right in Zero Energy Ready Homes...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Don't miss this special webinar. Presenter: Dr. Joseph Lstiburek, Building Science Corp. Read the text version. View the presentation slides Getting Enclosures Right in Zero Energy ...

  15. Building America Webinar: High-Performance Enclosure Strategies...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Advanced Framing Strategies Building America Webinar: High-Performance Enclosure Strategies, Part I: Unvented Roof Systems and Innovative Advanced Framing Strategies This ...

  16. Laboratory to demolish excavation enclosures at Material Disposal Area B

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    near DP Road Excavation Enclosures At MDA B Laboratory to demolish excavation enclosures at Material Disposal Area B near DP Road Pre-demolition activities are beginning this week and the work should be completed by the end of March 2013. November 1, 2012 The Laboratory plans to demolish the enclosures used to safely excavate and clean up the Lab's oldest waste disposal site near DP Road in Los Alamos. The Laboratory plans to demolish the enclosures used to safely excavate and clean up the

  17. Laboratory to demolish excavation enclosures at Material Disposal Area B

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    near DP Road Excavation Enclosures At MDA B Laboratory to demolish excavation enclosures at Material Disposal Area B near DP Road Pre-demolition activities are beginning this week and the work should be completed by the end of March 2013. November 1, 2012 The Laboratory plans to demolish the enclosures used to safely excavate and clean up the Lab's oldest waste disposal site near DP Road in Los Alamos. The Laboratory plans to demolish the enclosures used to safely excavate and clean up the

  18. Cold Climate Building Enclosure Solutions Kosny, J.; Fallahi...

    Office of Scientific and Technical Information (OSTI)

    that could be used in triple-deckers and colonial houses, common house types in New England. Several emerging building enclosure technologies were integrated, including...

  19. Webinar: High Performance Enclosure Strategies: Part I. Existing Homes

    Broader source: Energy.gov [DOE]

    The webinar will focus on specific Building America projects that have studied technical solutions to retrofit building enclosures to improve energy and durability performance. Presenters will...

  20. Laboratory to demolish excavation enclosures at Material Disposal Area B

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    near DP road Excavation enclosures at MDA B Laboratory to demolish excavation enclosures at Material Disposal Area B near DP road Pre-demolition activities are beginning this week and the work should be completed by the end of March 2013. November 1, 2012 The Laboratory plans to demolish the enclosures used to safely excavate and clean up the Lab's oldest waste disposal site near DP Road in Los Alamos. The Laboratory plans to demolish the enclosures used to safely excavate and clean up the

  1. Statement by Secretary Bodman in Response to the Inspector General...

    Broader source: Energy.gov (indexed) [DOE]

    "I expect to receive a full report on each of these taskings within 90 days. "Regardless of the outcome of the FBI investigation, just the unauthorized removal of the classified ...

  2. U.S. Department of Energy Office of Inspector General

    Energy Savers [EERE]

    staff should have been classified and protected from release at the time it was created. ... controls for identifying and handling classified national security information. 2 As you ...

  3. U.S. Department of Energy Office of Inspector General

    Broader source: Energy.gov (indexed) [DOE]

    ... Recovery Act projects, and EERE wanted the expertise of ICF International, a subcontractor on the New West-Energetics contract that had provided NEPA support to EERE's HQ offices. ...

  4. Testimony by the Inspector General | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Gregory H. Friedman: Before the U.S. House of Representatives Committee on Energy and Commerce Subcommittee on Oversight and Investigations Statement of Gregory H. Friedman,...

  5. U.S. Department of Energy Office of Inspector General

    Energy Savers [EERE]

    Saving Assessment | Department of Energy Completion of 500 Industrial Energy Saving Assessment U.S. Department of Energy Announces Completion of 500 Industrial Energy Saving Assessment May 9, 2008 - 11:30am Addthis Over 80 Trillion Btus of Natural Gas Savings Found WASHINGTON - The U.S. Department of Energy (DOE) today announced that it has completed the 500th Energy Saving Assessment (ESA) at the nation's largest industrial facilities. These assessments have helped companies identify

  6. U.S. Department of Energy Office of Inspector General

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... by the Congress in lieu of direct payment of fees by the Department into the NWF to ... * Assigning responsibility for the full payment of disposal costs to the owners and ...

  7. Office of Inspector General Recent Graduates Program Participant...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... which the Recent Graduate's performance appraisal will be based) Minimum Eligibility ... Maintain acceptable performance under the agency's approved performance management system. ...

  8. U.S. Department of Energy Office of Inspector General

    Office of Environmental Management (EM)

    Inspection Report National Nuclear Security Administration's Ability to Meet the Aircraft Requirements of the Joint Technical Operations Team DOEIG-0605 June 2003 Department of ...

  9. DEPARTMENT OF ENERGY OFFICE OF INSPECTOR GENERAL STRATEGIC PLAN

    Energy Savers [EERE]

    31, 2015 | Department of Energy Cumulative Federal Payments to OE Recovery Act Recipients, through August 31, 2015 Cumulative Federal Payments to OE Recovery Act Recipients, through August 31, 2015 Cumulative Federal Payments to OE Recovery Act Recipients, through August 31, 2015. OE ARRA Payments through August 2015 (20.9 KB) More Documents & Publications Cumulative Federal Payments to OE Recovery Act Recipients, through January 31, 2015 Cumulative Federal Payments to OE Recovery Act

  10. U.S. Department of Energy Office of Inspector General

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... At another site, we found eight network services andor devices with password management ... At one of the sites, the application included a password test function that could allow an ...

  11. The Office of Inspector General (OIG) has identified nine issue...

    Office of Environmental Management (EM)

    ... Our 2005 review noted systemic cyber security problems that ... These tasks are critical to planning and implementing ... in the event of an emergency, disaster, or malicious ...

  12. Office Inspector General DOE Annual Performance Report FY 2008...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    During Fiscal Year (FY) 2008, we reviewed a variety of critical areas relevant to the ... More Documents & Publications Combined Fiscal Year (FY) 2011 Annual Performance Results ...

  13. Office of Inspector General | National Nuclear Security Administration...

    National Nuclear Security Administration (NNSA)

    If you contact the OIG and choose to provide your name, the OIG will protect your identity to the maximum extent possible by law. To visit the OIG Web site, click here: http:...

  14. Free convective condensation in a vertical enclosure

    SciTech Connect (OSTI)

    Fox, R.J.; Peterson, P.F.; Corradini, M.L.; Pernsteiner, A.P.

    1995-09-01

    Free convective condensation in a vertical enclosure was studied numerically and the results were compared with experiments. In both the numerical and experimental investigations, mist formation was observed to occur near the cooling wall, with significant droplet concentrations in the bulk. Large recirculation cells near the end of the condensing section were generated as the heavy noncondensing gas collecting near the cooling wall was accelerated downward. Near the top of the enclosure the recirculation cells became weaker and smaller than those below, ultimately disappearing near the top of the condenser. In the experiment the mist density was seen to be highest near the wall and at the bottom of the condensing section, whereas the numerical model predicted a much more uniform distribution. The model used to describe the formation of mist was based on a Modified Critical Saturation Model (MCSM), which allows mist to be generated once the vapor pressure exceeds a critical value. Equilibrium, nonequilibrium, and MCSM calculations were preformed, showing the experimental results to lie somewhere in between the equilibrium and nonequilibrium predictions of the numerical model. A single adjustable constant (indicating the degree to which equilibrium is achieved) is used in the model in order to match the experimental results.

  15. Building America Webinar: High Performance Enclosure Strategies: Part II,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    New Construction - August 13, 2014 - Cladding Attachment Over Thick Exterior Rigid Insulation | Department of Energy Cladding Attachment Over Thick Exterior Rigid Insulation Building America Webinar: High Performance Enclosure Strategies: Part II, New Construction - August 13, 2014 - Cladding Attachment Over Thick Exterior Rigid Insulation This presentation, Cladding Attachment Over Thick Rigid Exterior Insulation, was delivered at the Building America webinar, High Performance Enclosure

  16. Manual for training reclamation inspectors in the fundamentals of hydrology

    SciTech Connect (OSTI)

    Curtis, W.R.; Dyer, K.L.; Williams, G.P.

    1988-01-01

    This handbook is intended to be a desk reference to help nonhydrologists achieve a basic understanding of hydrology as it relates to surface mining and reclamation. Surface coal mining and reclamation inspectors and other staff will find it useful in implementing regulatory programs. The handbook is not meant to be a comprehensive treatment of the subject. The handbook can be used in the training of surface-mining and reclamation inspectors, both Federal and State, and as a basic reference for inspectors in carrying out their assigned duties. The handbook describes clues and indicators of potential problems, suggests ways to prevent or mitigate them, and discusses various observation and sampling techniques.

  17. Action Center for the Office of the General Counsel | Department...

    Broader source: Energy.gov (indexed) [DOE]

    please follow the links below. Report an Appliance Regulation Violation Report Fraud to the Inspector General Submit a Buy American Complaint Submit a Legal Question About...

  18. Security Profile Inspector for UNIX Systems

    Energy Science and Technology Software Center (OSTI)

    1995-04-01

    SPI/U3.2 consists of five tools used to assess and report the security posture of computers running the UNIX operating system. The tools are: Access Control Test: A rule-based system which identifies sequential dependencies in UNIX access controls. Binary Authentication Tool: Evaluates the release status of system binaries by comparing a crypto-checksum to provide table entries. Change Detection Tool: Maintains and applies a snapshot of critical system files and attributes for purposes of change detection. Configurationmore » Query Language: Accepts CQL-based scripts (provided) to evaluate queries over the status of system files, configuration of services and many other elements of UNIX system security. Password Security Inspector: Tests for weak or aged passwords. The tools are packaged with a forms-based user interface providing on-line context-sensistive help, job scheduling, parameter management and output report management utilities. Tools may be run independent of the UI.« less

  19. Safety of Hydrogen Systems Installed in Outdoor Enclosures

    SciTech Connect (OSTI)

    Barilo, Nick F.

    2013-11-06

    The Hydrogen Safety Panel brings a broad cross-section of expertise from the industrial, government, and academic sectors to help advise the U.S. Department of Energys (DOE) Fuel Cell Technologies Office through its work in hydrogen safety, codes, and standards. The Panels initiatives in reviewing safety plans, conducting safety evaluations, identifying safety-related technical data gaps, and supporting safety knowledge tools and databases cover the gamut from research and development to demonstration and deployment. The Panels recent work has focused on the safe deployment of hydrogen and fuel cell systems in support of DOE efforts to accelerate fuel cell commercialization in early market applications: vehicle refueling, material handling equipment, backup power for warehouses and telecommunication sites, and portable power devices. This paper resulted from observations and considerations stemming from the Panels work on early market applications. This paper focuses on hydrogen system components that are installed in outdoor enclosures. These enclosures might alternatively be called cabinets, but for simplicity, they are all referred to as enclosures in this paper. These enclosures can provide a space where a flammable mixture of hydrogen and air might accumulate, creating the potential for a fire or explosion should an ignition occur. If the enclosure is large enough for a person to enter, and ventilation is inadequate, the hydrogen concentration could be high enough to asphyxiate a person who entered the space. Manufacturers, users, and government authorities rely on requirements described in codes to guide safe design and installation of such systems. Except for small enclosures used for hydrogen gas cylinders (gas cabinets), fuel cell power systems, and the enclosures that most people would describe as buildings, there are no hydrogen safety requirements for these enclosures, leaving gaps that must be addressed. This paper proposes that a technical

  20. National Ignition Facility subsystem design requirements beam transport enclosures SSDR 1.4.1

    SciTech Connect (OSTI)

    Meick, J.

    1996-10-01

    This SSDR establishes the performance, design, development, and test requirements for the NIF Beam Transport Enclosures.

  1. Building America Webinar: High Performance Enclosure Strategies: Part II,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    New Construction - August 13, 2014 - Introduction | Department of Energy Introduction Building America Webinar: High Performance Enclosure Strategies: Part II, New Construction - August 13, 2014 - Introduction This presentation is the Introduction to the Building America webinar, High Performance Enclosure Strategies, Part II, held on August 13, 2014. BA webinar_intro_8_13_14.pdf (969.17 KB) More Documents & Publications Building America Webinar: Retrofitting Central Space Conditioning

  2. ZERH Webinar: Getting Enclosures Right in Zero Energy Ready Homes |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Getting Enclosures Right in Zero Energy Ready Homes ZERH Webinar: Getting Enclosures Right in Zero Energy Ready Homes Without a doubt, Joe Lstiburek is a leading authority on high-performance buildings. What' s unique about Joe is that he provides specific, actionable guidance based on decades of experience, extensive research, and a unique ability to identify and communicate common sense solutions. Attendees to this webinar will learn best practices for high-R

  3. Building America Webinar: High Performance Enclosure Strategies: Part II,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    New Construction | Department of Energy Strategies: Part II, New Construction Building America Webinar: High Performance Enclosure Strategies: Part II, New Construction The webinar is the second in the series on designing and constructing high performance building enclosures, and will focus on effective strategies to address moisture and thermal needs. Peter Baker, Building Science Corporation, will discuss results of 3 years of laboratory and field exposure testing that examined the

  4. Building America Webinar: High-Performance Enclosure Strategies, Part I:

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Unvented Roof Systems and Innovative Advanced Framing Strategies | Department of Energy High-Performance Enclosure Strategies, Part I: Unvented Roof Systems and Innovative Advanced Framing Strategies Building America Webinar: High-Performance Enclosure Strategies, Part I: Unvented Roof Systems and Innovative Advanced Framing Strategies This webinar, held on February 12, 2015, focused on methods to design and build roof and wall systems for high performance homes that optimize energy and

  5. Digital X-ray Pipe Inspector Software

    Energy Science and Technology Software Center (OSTI)

    2009-10-29

    The Digital X-ray Pipe Inspector software requires a digital x-ray image of a pipe as input to the program, such as the image in Attachment A Figure 1. The image may be in a variety of software formats such as bitmap, jpeg, tiff, DICOM or DICONDE. The software allows the user to interactively select a region of interest from the image for analysis. This software is used to analyze digital x-ray images of pipes tomore » evaluate loss of wall thickness. The software specifically provides tools to analyze the image in (a) the pipe walls, (b) between the pipe walls. Traditional software uses only the information at the pipe wall while this new software also evaluates the image between the pipewalls. This makes the inspection process faster, more thorough, more efficient, and reduces expensive reshots. Attachment A Figure 2 shows a region of interest (a green box) drawn by the user around an anomaly in the pipe wall. This area is automatically analyzed by the external pipe wall tool with the result shown in Attachment A Figure 3. The edges of the pipe wall are detected and highlighted in yellow and areas where the wall thickness in less the the minimum wall threshold are shown in red. These measurements are typically made manually in other software programs, which lead to errors and inconsistency because the location of the edges are estimated by the user. Attachment A Figure 4 shows a region of interest (a green box) drawn by the user between the pipe walls. As can be seen there are intensity anomalies that correspond to wall defects. However, this information is not used directly by other software programs. In order to fully investigate these anomalies, the pipe would be reinspected in a different orientation to attempt to obtain a view of the anomaly in the pipe wall rather than the interior of the pipe. The pipe may need to be x-rayed a number of times to obtain the correct orientation. This is very costly and time consuming. The new software can perform the

  6. What do inspectors need to know about BMPs?

    SciTech Connect (OSTI)

    Foote, Jennifer; Lemke, Terrill; Zimmerly, Tim

    2008-01-01

    A successful inspection program is the key to proper implementation of Storm Water Pollution Prevention Plans (SWPPP) and maintaining regulatory compliance. Best Management Practices (BMPs), in turn, are the cornerstone of SWPPP implementation, effective storm water management, and successful sediment and erosion control. To ensure an effective and successful inspection program, inspectors need to have an appropriate and adequate knowledge of BMPs. This presentation will address obtaining adequate BMP knowledge, the challenges of interacting with others regarding BMPs, and examples of some frequently misused BMPs. Ensuring that inspectors have appropriate BMP knowledge gives them the tools to be effective. It is also important that inspectors understand how to discuss this information with the contractor, designers and regulators. This fosters consistence, quality, and regulatory compliance, which lends credibility to the industry.

  7. Quality Control Inspector 2.0: Purpose of Monitoring and Inspecting |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy 2.0: Purpose of Monitoring and Inspecting Quality Control Inspector 2.0: Purpose of Monitoring and Inspecting Purpose of Monitoring and Inspecting - Complete (20.91 MB) Lesson Plan: Purpose of Monitoring and Inspecting (299.15 KB) PowerPoint: Purpose of Monitoring and Inspecting (20.68 MB) More Documents & Publications Quality Control Inspector 2.0: Regulations and Standards Quality Control Inspector 2.0: Introduction to Weatherization for Quality Control Inspectors

  8. Sound reduction by metamaterial-based acoustic enclosure

    SciTech Connect (OSTI)

    Yao, Shanshan; Li, Pei; Zhou, Xiaoming; Hu, Gengkai

    2014-12-15

    In many practical systems, acoustic radiation control on noise sources contained within a finite volume by an acoustic enclosure is of great importance, but difficult to be accomplished at low frequencies due to the enhanced acoustic-structure interaction. In this work, we propose to use acoustic metamaterials as the enclosure to efficiently reduce sound radiation at their negative-mass frequencies. Based on a circularly-shaped metamaterial model, sound radiation properties by either central or eccentric sources are analyzed by numerical simulations for structured metamaterials. The parametric analyses demonstrate that the barrier thickness, the cavity size, the source type, and the eccentricity of the source have a profound effect on the sound reduction. It is found that increasing the thickness of the metamaterial barrier is an efficient approach to achieve large sound reduction over the negative-mass frequencies. These results are helpful in designing highly efficient acoustic enclosures for blockage of sound in low frequencies.

  9. Computer safeguards system for the IAEA inspectors at GCEP

    SciTech Connect (OSTI)

    Baker, A.L.; Harris, P.W.; Fienning, W.C.

    1983-01-01

    The Safeguards Data System (SDS), which is being developed to provide improved safeguards for the Gas Centrifuge Enrichment Plant at Portsmouth, Ohio, is described. The SDS is an automated, integrated computer data acquisition and data management system. It is designed to operate in a continuous unattended mode to provide attributes measurements, summary materials accounting data, and on-site data analysis capability to the IAEA inspectors at the GCEP facility.

  10. Enclosure for small animals during awake animal imaging

    DOE Patents [OSTI]

    Goddard, Jr., James S

    2013-11-26

    An enclosure or burrow restrains an awake animal during an imaging procedure. A tubular body, made from a radiolucent material that does not attenuate x-rays or gamma rays, accepts an awake animal. A proximal end of the body includes an attachment surface that corresponds to an attachment surface of an optically transparent and optically uniform window. An anti-reflective coating may be applied to an inner surface, an outer surface, or both surfaces of the window. Since the window is a separate element of the enclosure and it is not integrally formed as part of the body, it can be made with optically uniform thickness properties for improved motion tracking of markers on the animal with a camera during the imaging procedure. The motion tracking information is then used to compensate for animal movement in the image.

  11. Building America Webinar: High Performance Enclosure Strategies: Part II,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    New Construction - August 13, 2014 - Next Gen Advanced Framing for High Performance Homes Integrated System Solutions | Department of Energy Next Gen Advanced Framing for High Performance Homes Integrated System Solutions Building America Webinar: High Performance Enclosure Strategies: Part II, New Construction - August 13, 2014 - Next Gen Advanced Framing for High Performance Homes Integrated System Solutions This presentation, Next Gen Advanced Framing for High Performance Homes -

  12. Transuranic (TRU) Waste Processing Center- Cask Processing Enclosure

    Broader source: Energy.gov [DOE]

    Wastren Advantage, Inc., the DOE Prime contractor for the TRU Waste Processing Center (TWPC) conceived, designed, and constructed the new Cask Processing Enclosure (CPE) approach based on experience gained to date from Remote Handled (RH) waste processing. The CPE was designed August to October 2011, constructed from October 2011 to April 2012, and Start-up Readiness activities have just been completed. Initial radiological operations are targeted for July 19, 2012.

  13. Passive Tamper Indicating Enclosures Incorporating Embedded Optical Fibre

    SciTech Connect (OSTI)

    Wynn, Paul; White, Helen; Allen, Keir; Simmons, Kevin L.; Sliva, Paul; Benz, Jacob M.; Tanner, Jennifer E.

    2011-08-14

    AWE and PNNL are engaged in a technical collaboration investigating techniques to enhance continuity of knowledge over Accountable Items within a verified nuclear weapons dismantlement process. Tamper Indicating Enclosures (TIE) will likely be deployed as part of a chain of custody regime to indicate an unauthorised attempt to access an Accountable Item. This paper looks at the use of passive TIEs incorporating embedded optical fibre; concepts relating to deployment, tamper indication and unique identification will be discussed.

  14. Kansas City's Timpson: An everyday Inspector Gadget | National Nuclear

    National Nuclear Security Administration (NNSA)

    Security Administration | (NNSA) Kansas City's Timpson: An everyday Inspector Gadget Monday, January 4, 2016 - 12:00am NNSA Blog "I really just love to help people," said Erik Timpson of the National Security Campus in Kansas City. "whether that's teaching, researching, STEM, being an artist or scientist, being a husband or a dad...all that is just semantics ... I help people." National Security Campus Engineer Erik Timpson isn't your typical engineer; he carries around a

  15. ZERH Webinar: Getting Enclosures Right in Zero Energy Ready Homes (Text

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Version) | Department of Energy ZERH Webinar: Getting Enclosures Right in Zero Energy Ready Homes (Text Version) ZERH Webinar: Getting Enclosures Right in Zero Energy Ready Homes (Text Version) Here is the text version of the webinar Getting Enclosures Right in Zero Energy Ready Homes, presented in February 2016. Watch the presentation. Alex Krowka: Welcome to DOE Zero Energy Ready Home's technical training webinar series. We're really excited that you can join us today for this session on

  16. An American Academy for Training Safeguards Inspectors - An Idea Revisited

    SciTech Connect (OSTI)

    Philip Casey Durst; Robert Bean

    2010-07-01

    In 2009, we presented the idea of an American academy for training safeguards inspectors for the International Atomic Energy Agency (IAEA), due to the declining percentage of Americans in that international organization. In this paper we assert that there is still a compelling need for this academy. While the American Safeguards Academy would be useful in preparing and pre-training American inspectors for the IAEA, it would also be useful for preparing Americans for domestic safeguards duties in the U.S. Department of Energy (DOE), U.S. DOE National Laboratories, and the U.S. Nuclear Regulatory Commission (NRC). It is envisioned that such an academy would train graduate and post-graduate university students, DOE National Laboratory interns, and nuclear safeguards professionals in the modern equipment, safeguards measures, and approaches currently used by the IAEA. It is also envisioned that the Academy would involve the domestic nuclear industry, which could provide use of commercial nuclear facilities for tours and demonstrations of the safeguards tools and methods in actual nuclear facilities. This would be in support of the U.S. DOE National Nuclear Security Administration’s Next Generation Safeguards Initiative (NGSI). This training would also help American nuclear safeguards and non-proliferation professionals better understand the potential limitations of the current tools used by the IAEA and give them a foundation from which to consider even more effective and efficient safeguards measures and approaches.

  17. Issue #1: How Do We First Do No Harm with High-R Enclosures? | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy 1: How Do We First Do No Harm with High-R Enclosures? Issue #1: How Do We First Do No Harm with High-R Enclosures? What materials and approaches provide the "perfect," cost-effective, production-level, high-R enclosures for all major U.S. climate regions that ensure no moisture damage? issue1_moisture_perf.pdf (3.47 MB) issue1_highr_enclosures.pdf (5.05 MB) issue1_exterior_wall.pdf (2.04 MB) More Documents & Publications Building Science ZERH Webinar: Getting

  18. Working with Real Estate Home Inspectors, Exterminators, and Other "Nontraditional" Partners

    Broader source: Energy.gov [DOE]

    Better Buildings Neighborhood Program Workforce / Business Partners Peer Exchange Call: Working with Real Estate Home Inspectors, Exterminators, and other “Nontraditional” Partners, Call Slides and Discussion Summary, February 28, 2013. This workforce/business partners peer exchange call discussed working with real estate home inspectors, exterminators, and other “non­traditional” partners.

  19. Assessing the RELAPS-3D Heat Conduction Enclosure Model

    SciTech Connect (OSTI)

    McCann, Larry D.

    2008-09-30

    Three heat conduction problems that have exact solutions are modeled with RELAP5-3D using the conduction enclosure model. These comparisons are designed to be used in the RELAP5-3D development assessment scheduled to be completed in 2009. It is shown that with proper input choices and adequate model detail the exact solutions can be matched. In addition, this analysis identified an error and the required correction in the cylindrical and spherical heat conductor models in RELAP5-3D which will be corrected in a future version of RELAP5-3D.

  20. Special session: computational predictability of natural convection flows in enclosures

    SciTech Connect (OSTI)

    Christon, M A; Gresho, P M; Sutton, S B

    2000-08-14

    Modern thermal design practices often rely on a ''predictive'' simulation capability--although predictability is rarely quantified and often difficult to confidently achieve in practice. The computational predictability of natural convection in enclosures is a significant issue for many industrial thermal design problems. One example of this is the design for mitigation of optical distortion due to buoyancy-driven flow in large-scale laser systems. In many instances the sensitivity of buoyancy-driven enclosure flows can be linked to the presence of multiple bifurcation points that yield laminar thermal convective processes that transition from steady to various modes of unsteady flow. This behavior is brought to light by a problem as ''simple'' as a differentially-heated tall rectangular cavity (8:1 height/width aspect ratio) filled with a Boussinesq fluid with Pr = 0.71--which defines, at least partially, the focus of this special session. For our purposes, the differentially-heated cavity provides a virtual fluid dynamics laboratory.

  1. Building America Webinar: High Performance Enclosure Strategies, Part II: Low-E Storm Windows and Window Attachments

    Office of Energy Efficiency and Renewable Energy (EERE)

    Presentation from Building America Webinar: High Performance Enclosure Strategies, Part II: Low-E Storm Windows and Window Attachments.

  2. Multifamily Quality Control Inspector Job/Task Analysis and Report: September 2013

    SciTech Connect (OSTI)

    Owens, C. M.

    2013-09-01

    The development of job/task analyses (JTAs) is one of three components of the Guidelines for Home Energy Professionals project and will allow industry to develop training resources, quality assurance protocols, accredited training programs, and professional certifications. The Multifamily Quality Control Inspector JTA identifies and catalogs all of the tasks performed by multifamily quality control inspectors, as well as the knowledge, skills, and abilities (KSAs) needed to perform the identified tasks.

  3. System design description for the SY-101 vent header flow element enclosure upgrades

    SciTech Connect (OSTI)

    Vargo, G.F.

    1995-11-01

    This document describes the design of the High and Low Range Vent Header Flow Element(s) Field Enclosure for the 241-SY-101 High Level Nuclear Waste Underground Storage Tank.

  4. Building America Webinar: High Performance Enclosure Strategies: Part II, New Construction

    Broader source: Energy.gov [DOE]

    Date/Time:  August 13, 2014; 3:00-4:30 PM EDTDescription: The webinar is the second in the series on designing and constructing high performance building enclosures, and will focus on effective...

  5. Ventilation for an enclosure of a gas turbine and related method

    DOE Patents [OSTI]

    Schroeder, Troy Joseph; Leach, David; O'Toole, Michael Anthony

    2002-01-01

    A ventilation scheme for a rotary machine supported on pedestals within an enclosure having a roof, end walls and side walls with the machine arranged parallel to the side walls, includes ventilation air inlets located in a first end wall of the enclosure; a barrier wall located within the enclosure, proximate the first end wall to thereby create a plenum chamber. The barrier wall is constructed to provide a substantially annular gap between the barrier wall and a casing of the turbine to thereby direct ventilation air axially along the turbine; one or more ventilation air outlets located proximate a second, opposite end wall on the roof of the enclosure. In addition, one or more fans are provided for pulling ventilating air into said plenum chamber via the ventilation air inlets.

  6. U.S. Department of Energy Office of Inspector General Office of Audit Services

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of the Plutonium Finishing Plant Closure Project OAS-RA-L-11-01 November 2010 DOE F 1325.8 (08-93) United States Government Department of Energy Memorandum DATE: November 10, 2010 Audit Report Number: OAS-RA-L-11-01 REPLY TO ATTN OF: IG-34 (A10RA040) SUBJECT: Report on "Management of the Plutonium Finishing Plant Closure Project" TO: Manager, Richland Operations Office INTRODUCTION AND OBJECTIVE The Department of Energy's (Department) Richland Operations Office (Richland) awarded a

  7. Audit Report U.S. Department of Energy Office of Inspector General

    Office of Environmental Management (EM)

    Disposal of Remote-Handled Transuranic Waste at the Waste Isolation Pilot Plant DOEIG-0613 July 2003 Department of Energy Washington, DC 20585 July 18, 2003 MEMORANDUM FOR THE ...

  8. Office of Inspector General report on audit of shutdown and transition of the Mound Plant

    SciTech Connect (OSTI)

    1997-06-24

    With the end of the Cold War, the Department of Energy (Department) has greatly reduced the production of nuclear weapons and redirected the capabilities and focus of the weapons complex. As part of this redirection, the Mound Plant was transferred from a Defense Program site to an Environmental Management site with emphasis on accelerated cleanup and transition of facilities and personal property to the local community. This audit was initiated to determine if the shutdown and transition of the Mound Plant was progressing effectively and efficiently. The Department prepared a Nonnuclear Consolidation Plan (NCP) designed to reduce its costs of operation by closing and consolidating facilities. In contrast to the goal of the NCP, the Department plans to keep a portion of the Mound Plant open solely to perform work for other Federal agencies. Specifically, the Department has decided to continue assembling and testing isotopic heat sources and radioisotope thermoelectric generators (HS/RTG) at the Mound Plant despite the transfer or planned transfer of all other production operations.The Office of Nuclear Energy, Science and Technology decided to continue its HS/RTG operations at the Mound Plant without adequately considering the overall economic goals of the Department. As a result, the Department may not achieve the savings envisioned by the NCP. Also, the Department may incur between $4 million and $8.5 million more than necessary each year to continue its HS/RTG operations at the Mound Plant. Additionally, if the HS/RTG operations stay at the Mound Plant, the Department will spend more than $3 million to consolidate these operations into one location.

  9. U.S. Department of Energy Office of Inspector General Office...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Clearly, ensuring that identified internal control ... Implementation of the Corporate Human Resource ... Communication between Headquarters organizations and their ...

  10. Office of Inspector General report on audit of controls over the ADP support services contract

    SciTech Connect (OSTI)

    1997-08-15

    In March 1995, the Department awarded a cost-plus-award-fee contract to DynCorp valued at approximately $246 million over 5 years for ADP support services at Headquarters. The performance period for the contract was a 3-year base period with two 1-year options. The contract statement of work identified 24 information management functional areas that required technical support services, including Automated Office Systems Support and Local Area Network support. The purpose of the audit was to evaluate the cost-plus-award-fee contract for ADP support services at Headquarters. The objective was to determine whether the Department`s program offices at Headquarters were managing their ADP support services contract costs.

  11. Office of Inspector General audit report on Westinghouse Savannah River Company`s withdrawal of fees

    SciTech Connect (OSTI)

    1999-04-01

    As the operator of the Department`s Savannah River Site, Westinghouse Savannah River Company (Westinghouse) receives three types of fees: (1) award fees commensurate with the overall performance rating, (2) Performance Based Incentive (PBI) fees for achieving measurable goals or defined tasks as specified in annual operating plans, and (3) Cost Reduction Incentive Program (CRIP) fees for making improvements in site operations that reduce total contract costs. The Department`s Contracting Officer notifies Westinghouse when fees are earned, and Westinghouse withdraws the authorized amounts from the Department`s letter-of-credit account. The audit objective was to determine whether Westinghouse withdrew the appropriate amount of fees from the letter-of-credit account in Fiscal Years (FY) 1997 an 1998.

  12. U. S. Department of Energy Office of Inspector General FY 2015...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Authorization to Classified Matter or Material Management of the Department's Unmanned Aircraft Systems at Selected Sites Contractor Protective Force at Los Alamos ...

  13. Audit Resolution and Follow Up Program for Government Accountability Office and Office of Inspector General Activities

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2015-09-17

    The Order establishes policies, procedures, and responsibilities for the coordination of activities related to GAO audits and reviews. The revision will update and consolidate audit-related DOE Orders.

  14. Statement of Gregory H. Friedman Inspector General U.S. Department of Energy

    Energy Savers [EERE]

    Department of Energy of New Mexico Issues Permit For Remote-Handled Waste at WIPP State of New Mexico Issues Permit For Remote-Handled Waste at WIPP October 16, 2006 - 1:35pm Addthis Enables DOE to Permanently Move Waste to the WIPP Repository for Safe Disposal CARLSBAD, NM - U.S. Department of Energy (DOE) today announced that the New Mexico Environment Department (NMED) issued a revised hazardous waste facility permit for DOE's Waste Isolation Pilot Plant (WIPP) in Carlsbad, New Mexico.

  15. U.S. Department of Energy Office of Inspector General Annual Performance Report FY 2012

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    has

  16. U.S. DEPARTMENT OF ENERGY OFFICE OF INSPECTOR GENERAL ANNUAL...

    Broader source: Energy.gov (indexed) [DOE]

    ... River Site- Savannah River Nuclear Solutions 2010-2012 Oak Ridge Y-12- Babcock & Wilcox Y-12 LLC 2013 Naval Reactors- Bechtel Marine Propulsion Corporation 2013 ...

  17. U.S. Department of Energy Office of Inspector General Special...

    Broader source: Energy.gov (indexed) [DOE]

    and its consultants had of the market for Solyndra's product. OIG Case No. 11-0078-I 5 Credit Rating Solyndra was required to hire an outside firm to prepare a credit assessment...

  18. U.S. Department of Energy Office of Inspector General Annual...

    Energy Savers [EERE]

    ... such as carrying firearms, applying for and executing search warrants and making arrests. ... Audit of Department and Contractor Employee Pensions Audit of the Department of ...

  19. Statement of Gregory H. Friedman Inspector General U.S. Department...

    Office of Environmental Management (EM)

    ... 0848, available at: http:energy.govsitesprodfilesigproddocumentsIG-0848.pdf. 2 procurements, and construction before approving the preliminary safety and hazard analysis. ...

  20. U.S. Department of Energy Office of Inspector General Office...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Incident Management Guidance) does not address coordination and communication issues. ... The Department's OCIO provided Page 9 Comments AUDITOR COMMENTS comments that corrective ...

  1. Audit Report U.S. Department of Energy Office of Inspector General

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The Advanced Mixed Waste Treatment Facility Contract at the Idaho National Engineering and Environmental Laboratory DOE/IG-0622 September 2003

  2. Audit Report U.S. Department of Energy Office of Inspector General

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Modernization of Tritium Requirements Systems DOE/IG-0632 December 2003

  3. Audit Report U.S. Department of Energy Office of Inspector General

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Operations The Los Alamos Neutron Science Center DOE/IG-0666 November 2004

  4. Audit Report U.S. Department of Energy Office of Inspector General

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Use and Management of Mobile Communications Services DOE/IG-0669 December 2004

  5. Audit Report U.S. Department of Energy Office of Inspector General

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Report on Management Controls Over Contractor Tuition Reimbursements for Courses Leading to Degrees at Non-Accredited Educational Institutions OAS-M-04-07 September 2004

  6. U.S Department of Energy Office of Inspector General FOR IMMEDIATE...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... technical procedure change can be executed safely and requires that changes affecting work authorization be highlighted to the responsible line manager prior to implementation. ...

  7. U.S. Department of Energy Office of Inspector General Semiannual...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... employee was arrested and search warrants executed in an ... Agreement Pursuant to the terms of a Non-Prosecution ... Specifically, the Field Office frequently did not enter ...

  8. U.S. Department of Energy Office of Inspector General Ofice of Audit Services

    Office of Environmental Management (EM)

    of Health, Safety and Security Office of Analysis, HS-24 December 19, 2013 Responses to Frequently Asked Questions on DOE O 232.2, Occurrence Reporting and Processing of Operations Information Page 1 of 30 Responses to Frequently Asked Questions on DOE O 232.2, Occurrence Reporting and Processing of Operations Information Office of Analysis, HS-24 December 19, 2013 The intent of these responses to frequently asked questions (FAQ) is to provide additional insights for Department of Energy (DOE)

  9. U.S. DEPARTMENT OF ENERGY OFFICE OF INSPECTOR GENERAL No. I01IG001

    Energy Savers [EERE]

    ... tritium production, Price-Anderson enforcement issues, and ... by the Energy Policy Act of 1992. The firm also ... that there may be amendments filed, but again, could ...

  10. Audit Report U.S. Department of Energy Office of Inspector General

    Office of Environmental Management (EM)

    ... consistent with the Department of Defense (DoD) process, although the two processes are ... Finally, unlike DoD, NNSA had not established an independent group tasked with reviewing ...

  11. Method for sealing remote leaks in an enclosure using an aerosol

    DOE Patents [OSTI]

    Modera, Mark P.; Carrie, Francois R.

    1999-01-01

    The invention is a method and device for sealing leaks remotely by means of injecting a previously prepared aerosol into the enclosure being sealed according to a particular sealing efficiency defined by the product of a penetration efficiency and a particle deposition efficiency. By using different limits in the relationship between penetration efficiency and flowrate, the same method according the invention can be used for coating the inside of an enclosure. Specifically the invention is a method and device for preparing, transporting, and depositing a solid phase aerosol to the interior surface of the enclosure relating particle size, particle carrier flow rate, and pressure differential, so that particles deposited there can bridge and substantially seal each leak, with out providing a substantial coating at inside surfaces of the enclosure other than the leak. The particle size and flow parameters can be adjusted to coat the interior of the enclosure (duct) without substantial plugging of the leaks depending on how the particle size and flowrate relationships are chosen.

  12. ZFS on RBODs - Leveraging RAID Controllers for Metrics and Enclosure Management

    SciTech Connect (OSTI)

    Stearman, D. M.

    2015-03-30

    Traditionally, the Lustre file system has relied on the ldiskfs file system with reliable RAID (Redundant Array of Independent Disks) storage underneath. As of Lustre 2.4, ZFS was added as a backend file system, with built-in software RAID, thereby removing the need of expensive RAID controllers. ZFS was designed to work with JBOD (Just a Bunch Of Disks) storage enclosures under the Solaris Operating System, which provided a rich device management system. Long time users of the Lustre file system have relied on the RAID controllers to provide metrics and enclosure monitoring and management services, with rich APIs and command line interfaces. This paper will study a hybrid approach using an advanced full featured RAID enclosure which is presented to the host as a JBOD, This RBOD (RAIDed Bunch Of Disks) allows ZFS to do the RAID protection and error correction, while the RAID controller handles management of the disks and monitors the enclosure. It was hoped that the value of the RAID controller features would offset the additional cost, and that performance would not suffer in this mode. The test results revealed that the hybrid RBOD approach did suffer reduced performance.

  13. Apparatus for supporting a cryogenic fluid containment system within an enclosure

    DOE Patents [OSTI]

    Zhang, B.X.; Ganni, V.; Stifle, K.E.

    1995-01-31

    An apparatus is disclosed for supporting at least one inner cryogenic fluid containment system within an outer isolating enclosure to retard heat transfer into the inner containment system comprising a plurality of supports serially interconnected and laterally spaced by lateral connections to extend the heat conduction path into the inner containment system. 8 figs.

  14. Apparatus for supporting a cryogenic fluid containment system within an enclosure

    DOE Patents [OSTI]

    Zhang, Burt X.; Ganni, Venkatarao; Stifle, Kirk E.

    1995-01-01

    An apparatus for supporting at least one inner cryogenic fluid containment system within an outer isolating enclosure to retard heat transfer into the inner containment system comprising a plurality of supports serially interconnected and laterally spaced by lateral connections to extend the heat conduction path into the inner containment system.

  15. Hazardous waste site inspectors and operators: Their perceptions of the media and environmental groups

    SciTech Connect (OSTI)

    Graber, D.R.; Musham, C.

    1995-12-01

    This study assesses and compares the views and opinions of two groups (representing the `regulators` and the `regulated`) in one area of environmental management - the operation of commercial hazardous waste sites. A survey, sent to 141 managers of commercial treatment, storage, and disposal sites and 110 hazardous waste inspectors. This paper reports on their views of the role and influence of the media. In addition, the expectations for hazardous waste management by several stakeholder groups was examined.

  16. Development of an IAEA Training Course for Future U.S. Inspectors

    SciTech Connect (OSTI)

    Savannah Avgerinos Fitzwater; Amanda R. Rynes; David S. Bracken; Richard R. M. Metcalf; James D. West

    2011-07-01

    U.S. citizens currently make up only 12% of the positions held in the IAEA’s Department of Safeguards. While the United States has maintained a high level of support for the Agency over the duration of its history, the number of American inspectors currently in the field does not reflect this level of involvement. As a result, the National Nuclear Security Administration’s Office of International Relations, as part of the Next Generation Safeguards Initiative (NGSI) mission, has tasked Idaho National Laboratory (INL) to develop a rigorous two week hands-on training program to encourage and operationally acclimatize U.S. Citizens who are interested in applying for IAEA inspector positions using IAEA authorized equipment at INL. Idaho National Laboratory is one-of-a-kind in its ability to train IAEA inspectors by including training at nuclear facilities on site and includes, for example, direct measurement of an active spent fuel storage cooling pond. This accredited course will introduce and train attendees on the major IAEA systems used in collecting nuclear safeguards data and performing safeguards inspections. Unique in the United States, these classes will give attendees direct hands-on training and will address equipment purpose, function, operating principles, application, and troubleshooting, based upon what would be expected of an IAEA Safeguards Inspector in the field and in the office. Upon completion, U.S. applicants will be better qualified to pursue a position in the IAEA Department of Safeguards Operational Divisions. In support, INL has recently established a new laboratory space to house state of the art nuclear safeguards instrumentation. Currently, equipment installed in the laboratory space includes attended systems: 3DLR (3-D Imaging Laser) for design information verification, a Digital Cerenkov Viewing Device for measurement of spent fuel, HM-5 handheld radiation detectors, quantitative neutron and gamma systems; unattended monitoring

  17. Measure Guideline. Deep Energy Enclosure Retrofit for Interior Insulation of Masonry Walls

    SciTech Connect (OSTI)

    Musunuru, S.; Pettit, B.

    2015-04-30

    This Measure Guideline describes a deep energy enclosure retrofit solution for insulating mass masonry buildings from the interior. It describes the retrofit assembly, technical details, and installation sequence for retrofitting masonry walls. Interior insulation of masonry retrofits might adversely affect the durability of the wall. This guideline includes a review of decision criteria pertinent to retrofitting masonry walls from the interior and the possible risk of freeze-thaw damage.

  18. Measure Guideline. Deep Energy Enclosure Retrofit for Zero Energy Ready House Flat Roofs

    SciTech Connect (OSTI)

    Loomis, H.; Pettit, B.

    2015-05-29

    This Measure Guideline provides design and construction information for a deep energy enclosure retrofit solution of a flat roof assembly. It describes the strategies and procedures for an exterior retrofit of a flat wood-framed roof with brick masonry exterior walls using exterior and interior (framing cavity) insulation. The approach supported in this guide could also be adapted for use with flat wood-framed roofs with wood-framed exterior walls.

  19. Measure Guideline: Deep Energy Enclosure Retrofit for Zero Energy Ready House Flat Roofs

    SciTech Connect (OSTI)

    Loomis, H.; Pettit, B.

    2015-05-01

    This Measure Guideline provides design and construction information for a deep energy enclosure retrofit (DEER) solution of a flat roof assembly. It describes the strategies and procedures for an exterior retrofit of a flat, wood-framed roof with brick masonry exterior walls, using exterior and interior (framing cavity) insulation. The approach supported in this guide could also be adapted for use with flat, wood-framed roofs with wood-framed exterior walls.

  20. Measure Guideline: Deep Energy Enclosure Retrofit for Interior Insulation of Masonry Walls

    SciTech Connect (OSTI)

    Musunuru, S.; Pettit, B.

    2015-04-01

    This Measure Guideline describes a deep energy enclosure retrofit (DEER) solution for insulating mass masonry buildings from the interior. It describes the retrofit assembly, technical details, and installation sequence for retrofitting masonry walls. Interior insulation of masonry retrofits has the potential to adversely affect the durability of the wall; this document includes a review of decision criteria pertinent to retrofitting masonry walls from the interior and the possible risk of freeze-thaw damage.

  1. Using Third-Party Inspectors in Building Energy Codes Enforcement in India

    SciTech Connect (OSTI)

    Yu, Sha; Evans, Meredydd; Kumar, Pradeep; Van Wie, Laura; Bhatt, Vatsal

    2013-01-31

    India is experiencing fast income growth and urbanization, and this leads to unprecedented increases in demand for building energy services and resulting energy consumption. In response to rapid growth in building energy use, the Government of India issued the Energy Conservation Building Code (ECBC) in 2007, which is consistent with and based on the 2001 Energy Conservation Act. ECBC implementation has been voluntary since its enactment and a few states have started to make progress towards mandatory implementation. Rajasthan is the first state in India to adopt ECBC as a mandatory code. The State adopted ECBC with minor additions on March 28, 2011 through a stakeholder process; it became mandatory in Rajasthan on September 28, 2011. Tamil Nadu, Gujarat, and Andhra Pradesh have started to draft an implementation roadmap and build capacity for its implementation. The Bureau of Energy Efficiency (BEE) plans to encourage more states to adopt ECBC in the near future, including Haryana, Uttar Pradesh, Karnataka, Maharashtra, West Bengal, and Delhi. Since its inception, India has applied the code on a voluntary basis, but the Government of India is developing a strategy to mandate compliance. Implementing ECBC requires coordination between the Ministry of Power and the Ministry of Urban Development at the national level as well as interdepartmental coordination at the state level. One challenge is that the Urban Local Bodies (ULBs), the enforcement entities of building by-laws, lack capacity to implement ECBC effectively. For example, ULBs in some states might find the building permitting procedures to be too complex; in other cases, lack of awareness and technical knowledge on ECBC slows down the amendment of local building by-laws as well as ECBC implementation. The intent of this white paper is to share with Indian decision-makers code enforcement approaches: through code officials, third-party inspectors, or a hybrid approach. Given the limited capacity and human

  2. Quality Control Inspector (QCI) Pre-Exam Quiz | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    (QCI) Pre-Exam Quiz Quality Control Inspector (QCI) Pre-Exam Quiz This quiz is not representative of, nor related to the content of the actual QCI exam. While it is not an official indication as to whether or not someone can successfully pass the exam, it can be used as an assessment when deciding whether or not one is prepared to take the exam. This quiz was updated on 11/19/2014. QCI Pre-Exam Quiz (Updated 11/19/2014) (79.62 KB) More Documents & Publications 1703 Process Letter QER -

  3. Building America Webinar: High Performance Enclosure Strategies: Part II, New Construction- August 13, 2014- Moisture Monitoring Results in an R-40 Wall

    Broader source: Energy.gov [DOE]

    This presentation, Moisture Monitoring Results in an R-40 Wall, was presented at the Building America webinar, High Performance Enclosure Strategies, Part II, on August 13, 2014.

  4. Text-Alternative Version of Building America Webinar: High Performance Enclosure Strategies, Part II: Low-E Storm Windows and Window Attachments

    Broader source: Energy.gov [DOE]

    Text-Alternative Version of Building America Webinar: High Performance Enclosure Strategies, Part II: Low-E Storm Windows and Window Attachments

  5. Measure Guideline: Deep Energy Enclosure Retrofit for Double-Stud Walls

    SciTech Connect (OSTI)

    Loomis, H.; Pettit, B.

    2015-06-22

    This Measure Guideline describes a deep energy enclosure retrofit solution that provides insulation to the interior of the wall assembly with the use of a double-stud wall. The guide describes two approaches to retrofitting the existing walls—one that involves replacing the existing cladding and the other that leaves the cladding in place. This guideline also covers the design principles related to the use of various insulation types and provides strategies and procedures for implementing the double-stud wall retrofit. It also includes an evaluation of important moisture-related and indoor air quality measures that need to be implemented to achieve a durable high-performance wall.

  6. Measure Guideline: Deep Energy Enclosure Retrofit for Double-Stud Walls

    SciTech Connect (OSTI)

    Loomis, H.; Pettit, B.

    2015-06-01

    This Measure Guideline describes a deep energy enclosure retrofit (DEER) solution that provides insulation to the interior of the wall assembly with the use of a double stud wall. The guide describes two approaches to retrofitting the existing the walls: one involving replacement of the existing cladding, and the other that leaves the existing cladding in place. It discusses the design principles related to the use of various insulation types, and provides strategies and procedures for implementing the double stud wall retrofit. It also evaluates important moisture-related and indoor air quality measures that need to be implemented to achieve a durable, high performance wall.

  7. Enclosure 1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    contaminated transformer oils. Management of polychlorinated biphenyl (PCB) bearing transformers: FFTF's fourteen Polychlorinated Biphenyl (PCB) electrical transformers will be...

  8. Permanent total enclosures for VOC emission control at a RCRA transfer and storage facility

    SciTech Connect (OSTI)

    Davidson, S.L.; Rozmus, G.F.; Mehta, J.; Ardzinski, E. |

    1997-12-31

    Rollins Environmental Services operates a Transfer and Storage facility at their Allworth site in Mt. Pleasant, Tennessee. VOC control was originally accomplished by the use of close capture vents routed through a Regenerative Thermal Oxidizer. Capture efficiencies at several locations in the plant where hazardous waste was sampled and processed had been inadequate to fully meet EPA Clean Air Act Amendments Best Available Control Technology (BACT) or the requirements of OSHA 1910 Subpart Z--Toxic and Hazardous Substances standards and OSHA 1910.120(p)(5)--New Technology Program without the use of high levels of personal protective equipment (PPE) and extensive Industrial Hygiene monitoring. Therefore, a program was instituted to install permanent total enclosures in these areas with the goal of 100% capture of VOC`s. This paper presents the methodology by which this program was conceived and managed and the findings of the Industrial Safety and Health monitoring studies performed before and after the installation of the Permanent Total Enclosures and balancing of air flows in the system.

  9. Life-cycle cost analysis 200-West Weather Enclosure: Multi-function Waste Tank Facility

    SciTech Connect (OSTI)

    Umphrey, M.R.

    1995-01-16

    The Multi-Function Waste Tank Facility (MWTF)will provide environmentally safe and acceptable storage capacity for handling wastes resulting from the remediation of existing single-shell and double-shell tanks on the Hanford Site. The MWTF will construct two tank farm facilities at two separate locations. A four-tank complex will be constructed in the 200-East Area of the Hanford Site; a two-tank complex will be constructed in the 200-West Area. This report documents the results of a life-cycle cost analysis performed by ICF Kaiser Hanford Company (ICF KH) for the Weather Enclosure proposed to be constructed over the 200-West tanks. Currently, all tank farm operations on the Hanford Site are conducted in an open environment, with weather often affecting tank farm maintenance activities. The Weather Enclosure is being proposed to allow year-round tank farm operation and maintenance activities unconstrained by weather conditions. Elimination of weather-related delays at the MWTF and associated facilities will reduce operational costs. The life-cycle cost analysis contained in this report analyzes potential cost savings based on historical weather information, operational and maintenance costs, construction cost estimates, and other various assumptions.

  10. Construction of a Post-Irradiated Fuel Examination Shielded Enclosure Facility

    SciTech Connect (OSTI)

    Michael A. Lehto, Ph.D.; Boyd D. Christensen

    2008-05-01

    The U.S. Department of Energy (DOE) has committed to provide funding to the Idaho National Laboratory (INL) for new post-irradiation examination (PIE) equipment in support of advanced fuels development. This equipment will allow researchers at the INL to accurately characterize the behavior of experimental test fuels after they are removed from an experimental reactor also located at the INL. The accurate and detailed characterization of the fuel from the reactor, when used in conjunction with computer modeling, will allow DOE to more quickly understand the behavior of the fuel and to guide further development activities consistent with the missions of the INL and DOE. Due to the highly radioactive nature of the specimen samples that will be prepared and analyzed by the PIE equipment, shielded enclosures are required. The shielded cells will be located in the existing Analytical Laboratory (AL) basement (Rooms B-50 and B-51) at the INL Material and Fuels Complex (MFC). AL Rooms B-50 and B-51 will be modified to establish an area where sample containment and shielding will be provided for the analysis of radioactive fuels and materials while providing adequate protection for personnel and the environment. The area is comprised of three separate shielded cells for PIE instrumentation. Each cell contains an atmosphere interface enclosure (AIE) for contamination containment. The shielding will provide a work area consistent with the as-low-as-reasonably-achievable (ALARA) concept, assuming a source term of 10 samples in each of the three shielded areas. Source strength is assumed to be a maximum of 3 Ci at 0.75 MeV gamma for each sample. Each instrument listed below will be installed in an individual shielded enclosure: Shielded electron probe micro-analyzer (EPMA) Focused ion beam instrument (FIB) Micro-scale x-ray diffractometer (MXRD). The project is designed and expected to be built incrementally as funds are allocated. The initial phase will be to fund the

  11. U.S. Department of Energy Office of Inspector General report on audit of Department of Energy support service contracting

    SciTech Connect (OSTI)

    1995-06-30

    The purpose of this audit was to review the Department`s acquisition and use of support service contractors and subcontractors. The audit objectives were to determine if the Department (1) paid fees to both support service contractors and subcontractors for services exclusively performed by subcontractors, (2) used support service contractors to perform inherent government functions, and (3) rolled over unearned award fees to subsequent evaluation periods and had adequate management controls to ensure that contractor performance would be evaluated. The Department did not always obtain support services in the most economical and effective manner. The Department negotiated and paid four of six support service contractors an estimated $5.1 million in fees for services exclusively provided by subcontractors because the Department did not have a policy which addressed the inclusion, at the pre-award phase, of subcontract labor in the support service contractors` fee determinations. Furthermore, while the authors found no instances where support service contractors performed inherent government functions, they did note that the Department maintained minimal administration over major portions of contracted-for services on three of six support service contracts. This occurred because contractors subcontracted extensively for support services. Consequently, the Department may have decreased their ability to control cost growth on these three contracts. As discussed in Part 4, the Department`s process was sufficient in five of six cases to evaluate support service contractor performance. However, one of six cost-plus-award-fee contractors received award fees that exceeded its performance ratings by $89,000 because one Departmental office elected to rollover unearned portions of fees from prior evaluation periods and make them available in the next evaluation period.

  12. Office of Inspector General report on audit of Department of Energy management and operating contractor available fees

    SciTech Connect (OSTI)

    1996-05-01

    The Office of Procurement and Assistance Management has proposed changes to the method used to annually calculate and negotiate ``for profit`` management and operating contractor available fees. This proposal will increase contractor fees in exchange for the contractor`s purported assumption of additional risk. In 1991, the Department, through the Accountability Rule, increased contractor fees as an incentive to improve contractor performance and accountability. Despite the lack of measurable benefits of this effort, the Department is crafting a new fee policy which will, depending upon how it is executed, increase fees above the amount provided through the Accountability Rule as an incentive to the Department`s management and operating contractors. The objective of the audit was to determine whether the Department`s proposed change to the fee structure for determining management and operating contractor fees will be cost effective. This report describes the study`s approach, its findings and recommendations, management and auditor comments, and includes appendices with further data.

  13. Notice of Intent to Revise DOE Order 221.2A, "Cooperation with the Office of Inspector General"

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2016-04-08

    It is necessary to update the current version of this directive due to lack of consistent application and understanding of its provisions. DOE employees, program officials and managers, as well as employees of major facilities contractors, have indicated to OIG personnel that the directive, as currently written, is not sufficiently clear with respect to the nature and extent of cooperation with the OIG that is required.

  14. Fogging formulations for fixation of particulate contamination in ductwork and enclosures

    SciTech Connect (OSTI)

    Maresca, Jr., Joseph W.; Kostelnik, Lori M.; Kriskivich, James R.; Demmer, Rick L.; Tripp, Julia L.

    2015-09-08

    A method and an apparatus using aqueous fixatives for fogging of ventilation ductwork, enclosures, or buildings containing dust, lint, and particulates that may be contaminated by radionuclides and other dangerous or unsafe particulate contaminants, which method and apparatus are capable of (1) obtaining full coverage within the ductwork and (2) penetrating and fixing the lint, dust and large particles present in the ductwork so that no airborne particles are released during or after the application of the fixative. New aqueous fogging solutions outperform conventional glycerin-based solutions. These aqueous solutions will fog using conventional methods of application and contain a surfactant to aid wetting and penetration of the lint and dust, a binder to stabilize loose or respirable particles, and an agent to aid in fogging and enhance adhesiveness. The solutions are safe and easy to use.

  15. Rarefied gas flow in a rectangular enclosure induced by non-isothermal walls

    SciTech Connect (OSTI)

    Vargas, Manuel; Tatsios, Giorgos; Valougeorgis, Dimitris; Stefanov, Stefan

    2014-05-15

    The flow of a rarefied gas in a rectangular enclosure due to the non-isothermal walls with no synergetic contributions from external force fields is investigated. The top and bottom walls are maintained at constant but different temperatures and along the lateral walls a linear temperature profile is assumed. Modeling is based on the direct numerical solution of the Shakhov kinetic equation and the Direct Simulation Monte Carlo (DSMC) method. Solving the problem both deterministically and stochastically allows a systematic comparison and verification of the results as well as the exploitation of the numerical advantages of each approach in the investigation of the involved flow and heat transfer phenomena. The thermally induced flow is simulated in terms of three dimensionless parameters characterizing the problem, namely, the reference Knudsen number, the temperature ratio of the bottom over the top plates, and the enclosure aspect ratio. Their effect on the flow configuration and bulk quantities is thoroughly examined. Along the side walls, the gas flows at small Knudsen numbers from cold-to-hot, while as the Knudsen number is increased the gas flows from hot-to-cold and the thermally induced flow configuration becomes more complex. These flow patterns with the hot-to-cold flow to be extended to the whole length of the non-isothermal side walls may exist even at small temperature differences and then, they are enhanced as the temperature difference between the top and bottom plates is increased. The cavity aspect ratio also influences this flow configuration and the hot-to-cold flow is becoming more dominant as the depth compared to the width of the cavity is increased. To further analyze the flow patterns a novel solution decomposition into ballistic and collision parts is introduced. This is achieved by accordingly modifying the indexing process of the typical DSMC algorithm. The contribution of each part of the solution is separately examined and a physical

  16. Building America Case Study: Field Trial of an Aerosol-Based Enclosure Sealing Technology, Clovis, California (Fact Sheet), NREL (National Renewable Energy Laboratory)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Trial of an Aerosol-Based Enclosure Sealing Technology Clovis, California PROJECT INFORMATION Project Name: Field Trial of an Aerosol- Based Enclosure Sealing Technology Location: Clovis, CA Partners: De Young Properties deyoungproperties.com Building America Team: Alliance for Residential Building Innovation; Western Cooling Efficiency Center, University of California-Davis arbi.davisenergy.com wcec.ucdavis.edu Building Component: Building envelope Application: New, single-family Year Tested:

  17. Critically safe volume vacuum pickup for use in wet or dry cleanup of radioactive enclosures

    DOE Patents [OSTI]

    Zeren, J.D.

    1993-12-28

    A physical compact vacuum pickup device of critically safe volume and geometric shape is provided for use in radioactive enclosures, such as a small glove box, to facilitate manual cleanup of either wet or dry radioactive material. The device is constructed and arranged so as to remain safe when filled to capacity with plutonium-239 oxide. Two fine mesh filter bags are supported on the exterior of a rigid fine mesh stainless steel cup. This assembly is sealed within, and spaced from, the interior walls of a stainless steel canister. An air inlet communicates with the interior of the canister. A modified conventional vacuum head is physically connected to, and associated with, the interior of the mesh cup. The volume of the canister, as defined by the space between the mesh cup and the interior walls of the canister, forms a critically safe volume and geometric shape for dry radioactive particles that are gathered within the canister. A critically safe liquid volume is maintained by operation of a suction terminating float valve, and/or by operation of redundant vacuum check/liquid drain valves and placement of the air inlet. 5 figures.

  18. Critically safe volume vacuum pickup for use in wet or dry cleanup of radioactive enclosures

    DOE Patents [OSTI]

    Zeren, Joseph D.

    1993-12-28

    A physical compact vacuum pickup device of critically safe volume and geometric shape is provided for use in radioactive enclosures, such as a small glove box, to facilitate manual cleanup of either wet or dry radioactive material. The device is constructed and arranged so as to remain safe when filled to capacity with plutonium-239 oxide. Two fine mesh filter bags are supported on the exterior of a rigid fine mesh stainless steel cup. This assembly is sealed within, and spaced from, the interior walls of a stainless steel canister. An air inlet communicates with the interior of the canister. A modified conventional vacuum head is physically connected to, and associated with, the interior of the mesh cup. The volume of the canister, as defined by the space between the mesh cup and the interior walls of the canister, forms a critically safe volume and geometric shape for dry radioactive particles that are gathered within the canister. A critically safe liquid volume is maintained by operation of a suction terminating float valve, and/or by operation of redundant vacuum check/liquid drain valves and placement of the air inlet.

  19. A Cask Processing Enclosure for the TRU Waste Processing Center - 13408

    SciTech Connect (OSTI)

    Newman, John T.; Mendez, Nicholas [IP Systems, Inc., 2685 Industrial Lane, Broomfield, Colorado 80020 (United States)] [IP Systems, Inc., 2685 Industrial Lane, Broomfield, Colorado 80020 (United States)

    2013-07-01

    This paper will discuss the key elements considered in the design, construction, and use of an enclosure system built for the TRU Waste Processing Center (TWPC). The TWPC system is used for the repackaging and volume reduction of items contaminated with radioactive material, hazardous waste and mixed waste. The modular structural steel frame and stainless steel skin was designed for rapid field erection by the use of interchangeable self-framing panel sections to allow assembly of a sectioned containment building and for ease of field mobility. The structure was installed on a concrete floor inside of an outer containment building. The major sections included an Outer Cask Airlock, Inner Cask Airlock, Cask Process Area, and Personnel Airlocks. Casks in overpacks containing transuranic waste are brought in via an inter-site transporter. The overpack lid is removed and the cask/overpack is transferred into the Outer Cask Airlock. A contamination cover is installed on the overpack body and the Outer Cask Airlock is closed. The cask/overpack is transferred into the Inner Cask Airlock on a cask bogie and the Inner Cask Airlock is closed. The cask lid is removed and the cask is transferred into the Cask Process Area where it is placed on a cask tilting station. Once the Cask Processing Area is closed, the cask tilt station is activated and wastes are removed, size reduced, then sorted and re-packaged into drums and standard waste boxes through bag ports. The modular system was designed and built as a 'Fast Track' project at IP Systems in Broomfield Colorado and then installed and is currently in use at the DOE TWPC located near Oak Ridge, Tennessee. (authors)

  20. Enclosure Requirements to Protect Personnel from Spinning Rotor Frailures at the Power Electronics and Electric Machinery Research Center

    SciTech Connect (OSTI)

    McKeever, John W

    2007-08-01

    Performance evaluation of electric motors is a major function of the Power Electronics and Electric Machinery Research Center (PEEMRC). Normally these motors have a fixed wire-wound stator and a rotating rotor, which may have conductors embedded in a ferromagnetic core (induction motors), magnets mounted on the surface of the ferromagnetic core with a thin metal or composite cylinder or ring to hold them in place, or magnets embedded in the ferromagnetic core. Most of the work currently involves the last two permanent magnet (PM) configurations. Although the stator of a radial-gap motor can absorb energy from many of the fragments ejected from the rotor during operation, the stator of an axial-gap motor is not positioned to provide significant protection. The housing of each motor can also absorb some of the energy. The most conservative approach, however, is to assume that all fragments from the rotor must be contained by a protective enclosure. An ideal enclosure is transparent. Manufacturers of such plastics as Lexan, Tuffak, and Cyrolon sell different variations of transparent enclosure material. Lexan is a polycarbonate sheet. Lexgard{reg_sign} is a penetration resistant material made by layering polycarbonate material between pieces of ordinary glass. A fragment striking a sheet of enclosure material will pierce the surface layer, but the layered polycarbonate-glass material is able to absorb the fragment's energy before it completes penetration. Tuffak{reg_sign} is Lexan polycarbonate. Cyrolon{reg_sign} bullet resistant material is acrylic sheet. The ability of the enclosure to stop a fragment depends on its thickness as well as the penetration capability of the fragment; for example, a lead fragment has much less penetrating capability than a steel fragment. Enclosure thicknesses are commercially available to provide several levels of protection. These levels depend on the momentum of the fragments and have been evaluated for some common types of ammunition

  1. An overview of modeling methods for thermal mixing and stratification in large enclosures for reactor safety analysis

    SciTech Connect (OSTI)

    Haihua Zhao; Per F. Peterson

    2010-10-01

    Thermal mixing and stratification phenomena play major roles in the safety of reactor systems with large enclosures, such as containment safety in current fleet of LWRs, long-term passive containment cooling in Gen III+ plants including AP-1000 and ESBWR, the cold and hot pool mixing in pool type sodium cooled fast reactor systems (SFR), and reactor cavity cooling system behavior in high temperature gas cooled reactors (HTGR), etc. Depending on the fidelity requirement and computational resources, 0-D steady state models (heat transfer correlations), 0-D lumped parameter based transient models, 1-D physical-based coarse grain models, and 3-D CFD models are available. Current major system analysis codes either have no models or only 0-D models for thermal stratification and mixing, which can only give highly approximate results for simple cases. While 3-D CFD methods can be used to analyze simple configurations, these methods require very fine grid resolution to resolve thin substructures such as jets and wall boundaries. Due to prohibitive computational expenses for long transients in very large volumes, 3-D CFD simulations remain impractical for system analyses. For mixing in stably stratified large enclosures, UC Berkeley developed 1-D models basing on Zubers hierarchical two-tiered scaling analysis (HTTSA) method where the ambient fluid volume is represented by 1-D transient partial differential equations and substructures such as free or wall jets are modeled with 1-D integral models. This allows very large reductions in computational effort compared to 3-D CFD modeling. This paper will present an overview on important thermal mixing and stratification phenomena in large enclosures for different reactors, major modeling methods and their advantages and limits, potential paths to improve simulation capability and reduce analysis uncertainty in this area for advanced reactor system analysis tools.

  2. General Information

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    information General Information JLF Contacts Request a Tour

  3. Development and Attestation of Gamma-Ray Measurement Methodologies for use by Rostekhnadzor Inspectors in the Russian Federation

    SciTech Connect (OSTI)

    Jeff Sanders

    2006-09-01

    Development and attestation of gamma-ray non-destructive assay measurement methodologies for use by inspectors of the Russian Federal Service for Environmental, Technological, and Nuclear Oversight (Rostekhnadzor, formerly Gosatomnadzor or GAN), as well as for use by Russian nuclear facilities, has been completed. Specifically, a methodology utilizing the gamma-ray multi group analysis (MGA) method for determining plutonium isotopic composition has been developed, while existing methodologies to determining uranium enrichment and isotopic composition have been revised to make them more appropriate to the material types and conditions present in nuclear facilities in the Russian Federation. This paper will discuss the development and revision of these methodologies, the metrological characteristics of the final methodologies, as well as the limitations and concerns specific to the utilization of these analysis methods in the Russian Federation.

  4. Lightweight Technology Resolved Challenge Facing the Chevy Spark EV Battery Tray and Enclosure

    Broader source: Energy.gov [DOE]

    Technology innovation comes in many forms sometimes, its as simple as adapting a recent but un-commercialized innovation to a seemingly-unrelated problem. Thats what happened when General...

  5. April2002SAR Revised Final 6-3-02.pub

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4 October 1, 2001 - March 31, 2002 Office of Inspector General Office of Inspector General The Inspector General's Message - Page 1 The Department's Management Challenges Page 2...

  6. Better Buildings Neighborhood Program Workforce/Business Partners Peer Exchange Call: Working with Real Estate Home Inspectors, Exterminators, and other Non-traditionalŽ Partners Call Slides and Discussion Summary, February 28, 2013

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    February 28, 2013 Better Buildings Neighborhood Program Workforce/Business Partners Peer Exchange Call: Working with Real Estate Home Inspectors, Exterminators, and other "Non-traditional" Partners Call Slides and Discussion Summary Agenda * Call Logistics and Attendance * Featured Program Experience  Ben Gromicko, International Association of Certified Home Inspectors (InterNACHI)  Dave Hatchimonji, Energy Smart, Boulder, CO * Discussion  What are opportunities to leverage

  7. U.S. Department of Energy Office of Inspector General report on inspection of analytical laboratories oversight at the Strategic Petroleum Reserve

    SciTech Connect (OSTI)

    1995-07-26

    The Department of Energy`s (DOE) Assistant Secretary for Fossil Energy has overall programmatic responsibility for the Strategic Petroleum Reserve (SPR). The SPR Project Management Office (SPRPMO), located in New Orleans, Louisiana, and under the direction of the Project Manager, manages day-to-day project activities. The SPR currently has five underground crude oil storage facilities, and one marine terminal, on or near the Gulf Coasts of Texas and Louisiana. The purpose of this inspection was to review oversight of M and O and subcontractor laboratories performing analyses on samples taken for SPR environmental compliance and oil quality purposes. During this inspection, the M and O contractor operated on-site environmental laboratories at four of the SPR storage facilities, and oil quality laboratories at two of the facilities. The number of subcontractor laboratories varies depending on the need for analytical support. The objective of this inspection was to determine if the SPRPMO had implemented management systems to provide adequate oversight of M and O contractor analytical laboratory activities, as well as to ensure effective oversight of subcontractor analytical laboratories.

  8. U.S. Department of Energy Office of Inspector General report on inspection of Westinghouse Savannah River Company fees for managing and operating the Savannah River Site

    SciTech Connect (OSTI)

    1995-08-03

    During the first five years of its contract with the Department of Energy, Westinghouse Savannah River Company was paid over $130 million in fees to manage and operate the Savannah River Site. Fees paid to Westinghouse steadily increased over the five year period. For example, fees paid for the last six months of this five year period were over three times as large as fees paid for the first six months. The purpose of this inspection was to review the Department`s annual negotiation of total available fees with Westinghouse, and to examine the reasons for the growth in fees over this five year period. The review disclosed that, after Fiscal Year 1989, the Department used an increasing number of fee bases in calculating Westinghouse Savannah River Company`s fixed-fee-equivalents from the maximum fee schedules within the Department of Energy Acquisition Regulation. The authors found that the Department had significantly increased the percentage of the dollar value of subcontracts being placed in Westinghouse`s fee bases for fee calculation purposes. They found that the Department had effectively increased Westinghouse`s fixed-fee-equivalents by approximately $3 million in both Fiscal Year 1993 and 1994 to, in large part, fund an unallowable employee incentive compensation program. They found that Westinghouse`s total paid fees for the five year period increased significantly over what they would have been had the terms resulting from the original competitive negotiations been maintained. The authors recommended that the Deputy Assist Secretary for Procurement and Assistance Management require that changes in either the number or composition of fee bases used in calculating fees from the maximum fee schedules be submitted to the Department`s Procurement Executive for approval.

  9. Office of Inspector General audit report on the U.S. Department of Energy`s management of Associated Western Universities grant programs

    SciTech Connect (OSTI)

    1998-04-01

    The Department of Energy (DOE), recognizing the need to maintain a strong science and engineering base at a time when enrollments in these disciplines were declining, implemented several educational programs. Among these were educational programs to provide faculty and students of US colleges and universities with energy-related training and research experience. Associated Western Universities (AWU), a nonprofit organization, administered post-secondary educational programs for DOE through grants and, occasionally, subcontracts. The objectives of the audit were to determine whether: (1) DOE was achieving its goal of enhancing US science and engineering education and (2) AWU was appropriately accumulating and classifying its costs. It was found that DOE was not fully achieving its objective of enhancing science and engineering education for students of US colleges and universities. In addition, it was found that AWU had not complied with cost principles for nonprofit organizations as required under the terms of the grants. Specifically, AWU misclassified a $13,000 overrun of direct program cost as indirect cost, incurred $40,000 of idle facility costs that were unallowable under the terms of the grant, misclassified indirect costs as direct costs, and claimed reimbursement for consultant costs that were inappropriate under the terms of the consulting contract. These discrepancies resulted in $53,000 of questionable costs, as well as costs having been charged to the Office of Energy Research (ER) grant that should have been charged to the Richland and Idaho grants. The authors recommended that the Managers of the Richland and Idaho Operations offices take actions to ensure that the objectives of DOE`s educational programs are met. In addition, they recommended that the Manager, Idaho Operations Office, direct the Contracting Officer to have AWU comply with the appropriate cost principles for nonprofit organizations.

  10. Notice of Intent to Revise DOE Order 221.1A, Reporting Fraud, Waste and Abuse to the Office of Inspector General

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2015-12-12

    It is necessary to update the current version of this directive due to a lack of consistent application and understanding of its provisions.

  11. General Engineers

    U.S. Energy Information Administration (EIA) Indexed Site

    General Engineers The U.S. Energy Information Administration (EIA) within the Department of Energy has forged a world-class information program that stresses quality, teamwork, and employee growth. In support of our program, we offer a variety of profes- sional positions, including the General Engineer, whose work is associated with analytical studies and evaluation projects pertaining to the operations of the energy industry. Responsibilities: General Engineers perform or participate in one or

  12. General Engineer

    Broader source: Energy.gov [DOE]

    This position is located in Office of Standard Contract Management, within the Office of the General Counsel (GC). The purpose of the position is to conduct technical and engineering reviews of the...

  13. General Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    General Publications General Publications Print ALS Strategic Plan 2015-19 cover image An updated version of the ALS Strategic Plan, covering the five-year period from 2015 to 2019. As in the 2014-18 version, Section I gives a brief synopsis on beamline and endstation projects. The science drivers behind these projects are explained in greater detail in Section II, and a very brief description of emerging plans for a ALS-U are in Section III. Soft X-ray Science Opportunities Using

  14. Enclosure I C)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    C) 00 0 C4 00 Cu -D a- ) 0 c tm 0C' CL' U) 0 0) (ID u Itt .2 U) in~ E c * - c m0 0 oL . 0m CutU Ci) o 0 __ -C - m-->\\ m- CD-____ 2: U ml ~-1 C) C)ZCl) V X 00 0 CL .0 0d m V) r- - U 'I z U)C/) A ccu - * co cu o . 0 s >co O. 00 ~~. C'~- ~ ~a) m -4..U 00) C.? 0 w 0 CL0 0 0.0 U-C<0 c- 4- .2 -A _ -Q 0 m U) :30 W, . T 0 C: U) 0 . C 0) E 0 o oL E :3 M C . E 0U) CL 00 _ _ _ _ _ _ c* a) L(n V- 0 0)0 0)0 0 (D~ N 0 a) 0) 0 0 V0 ClC 00 'd C) m U) z ~Lr ) o ~ ~~~ LO c 0 , 0 )O~)0 0> .0 0 E i ) o

  15. A = 5 General Tables

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 General Tables The General Table for 5H is subdivided into the following categories: Cluster Model Hypernuclei Model Calculations Photodisintegration Pions The General Table for...

  16. 8C General Tables

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    C General Tables The General Table for 8C is subdivided into the following categories: Reviews Other Theoretical Work...

  17. 6Be General Tables

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6Be General Table The General Table for 6Be is subdivided into the following categories: Cluster Model Model Calculations...

  18. 7He General Tables

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    He General Table The General Table for 7He is subdivided into the following categories: Experimental Theoretical Model Calculations Hypernuclei and Mesons Pions

  19. 9He General Tables

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    He General Table The General Table for 9He is subdivided into the following categories: Shell Model Other Model Calculations Theoretical

  20. 5He General Tables

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    He General Table The General Table for 5He is subdivided into the following categories: Ground State Properties Theoretical Special States Model Discussions Shell Model Cluster...

  1. 6He General Tables

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    He General Table The General Table for 6He is subdivided into the following categories: Ground State Properties Theoretical Special States Shell Model Cluster and alpha-particle...

  2. 7Be General Tables

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Be General Table The General Table for 7Be is subdivided into the following categories: Reviews Experimental Work Shell Model Cluster Model Other Theoretical Work Model...

  3. 5H General Tables

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    H General Table The General Table for 5H is subdivided into the following categories: Cluster Model Hypernuclei Model Calculations Photodisintegration Pions...

  4. 10He General Tables

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    General Table The General Table for 10He is subdivided into the following categories: Theoretical Shell Model Cluster Model Other Models Special States Electromagnetic Transitions...

  5. General | Open Energy Information

    Open Energy Info (EERE)

    General Jump to: navigation, search Informacin y Documentos Herramientas y Modelos <> Estadsticas de Energas Renovables Volver Pgina principal General banner.jpg Retrieved...

  6. Generalized Cartan Calculus in general dimension

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Wang, Yi -Nan

    2015-07-22

    We develop the generalized Cartan Calculus for the groups G = SL(2,R) × R+, SL(5,R) and SO(5,5). They are the underlying algebraic structures of d=9,7,6 exceptional field theory, respectively. These algebraic identities are needed for the "tensor hierarchy" structure in exceptional field theory. The validity of Poincar\\'e lemmas in this new differential geometry is also discussed. Lastly, we explore some possible extension of the generalized Cartan calculus beyond the exceptional series.

  7. Fiscal Year 2012 Work Performed Under the Work for Others Program...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DC 20585 March 12, 2014 MEMORANDUM FOR THE MANAGER, LOS ALAMOS FIELD OFFICE FROM: George W. Collard Assistant Inspector General for Audits Office of Inspector General SUBJECT: ...

  8. G

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... to the Inspector General or senior ethics official for any entity without an ... notify the Inspector General or senior ethics official for any entity without an ...

  9. Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    OFFICE OF MANAGEMENT FROM: Gregory H. Friedman Inspector General SUBJECT: INFORMATION: ... Sincerely, Gregory H. Friedman Inspector General Attachment 2 7 OBJECTIVE, SCOPE, AND ...

  10. peer

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    U.S. DEPARTMENT OF ENERGY OFFICE OF INSPECTOR GENERAL OFFICE OF AUDIT SERVICES APRIL 1998 MEMORANDUM FOR THE SECRETARY FROM: Gregory H. Friedman Acting Inspector General SUBJECT: ...