Sample records for innovative technology loan

  1. Innovation Ohio Loan Program (Ohio)

    Broader source: Energy.gov [DOE]

    Innovation Ohio Loan Program provides loans for acquisition, construction, and related costs of technology, facilities, and equipment purchase. The Ohio Department of Development’s (Development)...

  2. Audit Report "The Department of Energy's Loan Guarantee Program for Innovative Energy Technologies"

    SciTech Connect (OSTI)

    None

    2009-02-01T23:59:59.000Z

    The Energy Policy Act of 2005 authorized the Department of Energy to guarantee loans for new or significantly improved energy production technologies that avoid, reduce, or sequester air pollutants and other greenhouse gases. As of December 2008, Congress authorized the Department to make $42.5 billion in loan guarantees to support innovative energy projects. These guarantees were authorized for up to 80% of the total project costs and were designed to promote the commercial use of innovative technologies. Under the terms of the Act, the loan guarantees are contingent upon reasonable prospect of repayment by the borrower. Consistent with the Energy Policy Act, the Department is responsible for soliciting and evaluating loan applications, approving loan guarantees, and monitoring project and loan guarantee performance. through December 2008, the Department had issued five solicitations for projects that support innovative clean coal technologies, energy efficiency, renewable energy, advanced electricity transmission and distribution, and nuclear and fossil energy projects. These solicitations were issued in three phases with the first in August 2006, and the final in September 2008. Eleven substantially complete applications requesting approximately $8.2 billion in loan guarantees had been received by the Department in response to the first solicitation. The Department had begun the review of applications and was in the process of completing due diligence procedures necessary to evaluate projects received in response to the first solicitation. Under current plans, the Department is to issue its first loan guarantees in the spring of 2009. Because of the importance of this program as part of an effort to address the Nation's most challenging and pressing energy needs; and, the potential risk of loss to the United States taxpayers should default occur, we initiated this review to evaluate the Department's progress in establishing internal and operational controls over its Loan Guarantee Program.

  3. Sec. Chu Announces the First Auto Loans for Advanced Technologies

    Broader source: Energy.gov [DOE]

    In Dearborn, Michigan Energy Secretary Steven Chu announced $8 billion in conditional loan commitments for the development of innovative, advanced vehicle technologies that will create thousands of...

  4. Sec. Chu Announces the First Auto Loans for Advanced Technologies

    SciTech Connect (OSTI)

    Secretary Chu

    2009-07-16T23:59:59.000Z

    Energy Secretary Steven Chu announced $8 billion in conditional loan commitments for the development of innovative, advanced vehicle technologies that will create thousands of green jobs while helping reduce the nation’s dangerous dependence on foreign oil. The first three auto loans for advanced technologies were awarded to Ford Motor Company, Nissan Motors and Tesla Motors.

  5. Sec. Chu Announces the First Auto Loans for Advanced Technologies

    ScienceCinema (OSTI)

    Secretary Chu

    2010-09-01T23:59:59.000Z

    Energy Secretary Steven Chu announced $8 billion in conditional loan commitments for the development of innovative, advanced vehicle technologies that will create thousands of green jobs while helping reduce the nation?s dangerous dependence on foreign oil. The first three auto loans for advanced technologies were awarded to Ford Motor Company, Nissan Motors and Tesla Motors.

  6. Innovation and Transportation's Technologies

    E-Print Network [OSTI]

    Garrison, William L.

    2001-01-01T23:59:59.000Z

    decision making. Innovation and technology lock-in hasStage 1 imagine the innovation and technology developmentof emphasizing innovation and technology development. Pull

  7. Science, technology and innovation

    E-Print Network [OSTI]

    Sussex, University of

    Science, technology and innovation Taught degrees MSc in Innovation and Sustainability for International Development 1 year full time/2 years part time Technological innovation lies at the heart in the academic and political circles related to the impact of science, technology and innovation in the context

  8. The Technology & Innovation Centre

    E-Print Network [OSTI]

    Mottram, Nigel

    The Technology & Innovation Centre #12;The Technology and Innovation Centre revolutionises the way in Scotland and further afield ­ including power and energy, renewable technologies, photonics and sensors, for industry, the Technology and Innovation Centre has already attracted major partners including Scottish

  9. Bridging the Technology Innovation

    E-Print Network [OSTI]

    Wirosoetisno, Djoko

    Bridging the Technology Innovation Gap Dr Ceri Williams Director of Medical Technologies Innovation Technologies #12;Distinctive Approach to Translating ResearchWe support innovation to reach TRL 5 enable real and Knowledge Centre #12;What is the Medical Technologies IKC? · All activities centre on research translation

  10. Technology Innovation Program | Partnerships | ORNL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Innovation Program SHARE Technology Innovation Program The Technology Innovation Program (TIP) is a 1-year program designed to accelerate selected technologies to commercial...

  11. Technology Innovation Program 2010ANNUAL REPORT

    E-Print Network [OSTI]

    Technology Innovation Program 2010ANNUAL REPORT 2010ANNUAL REPORT Technology Innovation ProgramTechnology Innovation ProgramTechnology Innovation ProgramTechnology Innovation ProgramTechnology Innovation ProgramTechnology Innovation ProgramTechnology Innovation ProgramTechnology Innovation ProgramTechnology Innovation ProgramTechnology

  12. Stimulating Energy Technology Innovation

    E-Print Network [OSTI]

    Moniz, Ernest J.

    The innovation system has interrelated components of invention, translation, adoption, and diffusion. Energy technology innovation has lagged that in other domains, and there is a compelling public interest in picking up ...

  13. Edison Innovation Green Growth Fund Loans

    Broader source: Energy.gov [DOE]

    Note: The energy efficiency technologies indicated as "eligible" above are examples of possible eligible technologies listed on the program web site. Other products that conserve electricity or...

  14. Technology Innovation Program Transforming America's Future Through Innovation

    E-Print Network [OSTI]

    Technology Innovation Program Transforming America's Future Through Innovation 2009ANNUAL REPORT and Technology Dr. Patrick D. Gallagher, Director Technology Innovation Program Dr. Lorel Wisniewski, Acting Director National Institute of Standards and Technology Technology Innovation Program 100 Bureau Drive

  15. Technology Innovation Program Advisory Board

    E-Print Network [OSTI]

    Magee, Joseph W.

    Technology Innovation Program Advisory Board 2009 Annual Report of the #12;2009 Annual Report of the Technology Innovation Program Advisory Board U.S. Department of Commerce National Institute of Standards and Technology Technology Innovation Program February 2010 #12;For Information regarding the Technology

  16. Technology Innovation Program Advisory Board

    E-Print Network [OSTI]

    Technology Innovation Program Advisory Board 2011 Annual Report of the #12;#12;i 2011 Annual Report of the Technology Innovation Program Advisory Board U.S. Department of Commerce National Institute of Standards and Technology Technology Innovation Program March 2012 #12;ii For Information regarding the Technology

  17. Technology Innovation Program Advisory Board

    E-Print Network [OSTI]

    Technology Innovation Program Advisory Board 2009 Annual Report of the Technology Innovation Program Advisory Board 2010 Annual Report of the #12;2010 Annual Report of the Technology Innovation Program Advisory Board U.S. Department of Commerce National Institute of Standards and Technology

  18. Innovative Exploration Technologies Subprogram Overview

    Broader source: Energy.gov [DOE]

    This overview of GTP's Innovative Exploration Technologies subprogram was given at the GTP Program Peer Review on May 18, 2010.

  19. Geothermal innovative technologies catalog

    SciTech Connect (OSTI)

    Kenkeremath, D. (ed.)

    1988-09-01T23:59:59.000Z

    The technology items in this report were selected on the basis of technological readiness and applicability to current technology transfer thrusts. The items include technologies that are considered to be within 2 to 3 years of being transferred. While the catalog does not profess to be entirely complete, it does represent an initial attempt at archiving innovative geothermal technologies with ample room for additions as they occur. The catalog itself is divided into five major functional areas: Exploration; Drilling, Well Completion, and Reservoir Production; Materials and Brine Chemistry; Direct Use; and Economics. Within these major divisions are sub-categories identifying specific types of technological advances: Hardware; Software; Data Base; Process/Procedure; Test Facility; and Handbook.

  20. Innovative Technologies and Techniques

    E-Print Network [OSTI]

    Samano, R.; Swinford, S.

    2014-01-01T23:59:59.000Z

    November 2014 Innovative Technologies and Techniques ESL-KT-14-11-22 CATEE 2014: Clean Air Through Efficiency Conference, Dallas, Texas Nov. 18-20 What’s New in Energy Efficient Cooling Systems? ? Director of Energy Management ? Moving Away From... Refrigerants ? LEED ? Reducing the Carbon Footprint ? Improving Indoor Air Quality - IAQ ? High Efficiency Fans and Motors ? Economizers ESL-KT-14-11-22 CATEE 2014: Clean Air Through Efficiency Conference, Dallas, Texas Nov. 18-20 Outside Air Management Experts...

  1. ForPeerReview THE LINK BETWEEN NON TECHNOLOGICAL INNOVATIONS

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    ForPeerReview THE LINK BETWEEN NON TECHNOLOGICAL INNOVATIONS AND TECHNOLOGICAL INNOVATION Journal: Organizational innovation, Marketing innovation, Technological Innovation, Performance European Journal THE LINK BETWEEN NON TECHNOLOGICAL INNOVATIONS AND TECHNOLOGICAL INNOVATION Abstract Purpose This paper

  2. Innovative Separations Technologies

    SciTech Connect (OSTI)

    J. Tripp; N. Soelberg; R. Wigeland

    2011-05-01T23:59:59.000Z

    Reprocessing used nuclear fuel (UNF) is a multi-faceted problem involving chemistry, material properties, and engineering. Technology options are available to meet a variety of processing goals. A decision about which reprocessing method is best depends significantly on the process attributes considered to be a priority. New methods of reprocessing that could provide advantages over the aqueous Plutonium Uranium Reduction Extraction (PUREX) and Uranium Extraction + (UREX+) processes, electrochemical, and other approaches are under investigation in the Fuel Cycle Research and Development (FCR&D) Separations Campaign. In an attempt to develop a revolutionary approach to UNF recycle that may have more favorable characteristics than existing technologies, five innovative separations projects have been initiated. These include: (1) Nitrogen Trifluoride for UNF Processing; (2) Reactive Fluoride Gas (SF6) for UNF Processing; (3) Dry Head-end Nitration Processing; (4) Chlorination Processing of UNF; and (5) Enhanced Oxidation/Chlorination Processing of UNF. This report provides a description of the proposed processes, explores how they fit into the Modified Open Cycle (MOC) and Full Recycle (FR) fuel cycles, and identifies performance differences when compared to 'reference' advanced aqueous and fluoride volatility separations cases. To be able to highlight the key changes to the reference case, general background on advanced aqueous solvent extraction, advanced oxidative processes (e.g., volumetric oxidation, or 'voloxidation,' which is high temperature reaction of oxide UNF with oxygen, or modified using other oxidizing and reducing gases), and fluorination and chlorination processes is provided.

  3. Innovative Technology Loan Guarantee Program | Department of...

    Broader source: Energy.gov (indexed) [DOE]

    Subcommittee on Economic Growth, Job Creation and Regulatory Affairs - House Committee on Oversight and Governmant Reform Before the Senate Energy and Natural Resources Committee...

  4. Environmental Mitigation Technology (Innovative System Testing...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technology (Innovative System Testing)-Deployment and Testing of the Alden Hydropower Fish-Friendly Turbine Environmental Mitigation Technology (Innovative System...

  5. Medical Technologies Innovation Training 2014 BIOINNOVATE FELLOWSHIP

    E-Print Network [OSTI]

    Prinz, Friedrich B.

    Medical Technologies Innovation Training 2014 BIOINNOVATE FELLOWSHIP BioInnovate Ireland is now medical technology companies and for the development of innovative medical device products. Ireland solutions to meet those needs and implement a strategy to commercialise the technology. BioInnovate

  6. NAC Technology and Innovation Committee Meeting Report

    E-Print Network [OSTI]

    Christian, Eric

    NAC Technology and Innovation Committee Meeting Report Esther Dyson Chair, NAC Technology and Innovation Committee August 6, 2010 0 #12;Technology and Innovation Agenda Aug. 3rd Meeting · OCT Update ­ R programs ­ P. Desai · OCT/ESMD Technology Coordination ­ J. Reuther · Overview of ESMD New Technology

  7. Carbon Markets and Technological Innovation

    E-Print Network [OSTI]

    Weber, T A; Neuhoff, Karsten

    www.eprg.group.cam.ac.uk E P R G W O R K IN G P A P E R N O N -T E C H N IC A L S U M M A R Y Carbon Markets and Technological Innovation EPRG Working Paper 0917 Cambridge Working Paper in Economics 0932 Thomas A. Weber... and Karsten Neuhoff This paper examines how considering firm-level innovation in carbon-abatement technologies influences the optimal design choice for carbon pricing. It builds on Weitzman’s model (1974) that shows in what instances cap and trade...

  8. 2015 Technology Innovation Projects

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for RTU and Lighting Retrofits Energy Efficiency TIP 140: Energy Efficiency Emerging Technology Assessment and Demonstration Projects TIP 261: Determining and Improving the...

  9. Web Technologies for Open Innovation Darko Jesic

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Web Technologies for Open Innovation Darko Jesic Université Paris-Dauphine, DRM, Mlab Place du on the application of the Web technologies in the open innovation model. We analyze technologies for expert search of different open innovation paradigms in the function of Web technologies that serve for their realization

  10. Innovation investment area: Technology summary

    SciTech Connect (OSTI)

    Not Available

    1994-03-01T23:59:59.000Z

    The mission of Environmental Management`s (EM) Office of Technology Development (OTD) Innovation Investment Area is to identify and provide development support for two types of technologies that are developed to characterize, treat and dispose of DOE waste, and to remediate contaminated sites. They are: technologies that show promise to address specific EM needs, but require proof-of-principle experimentation; and (2) already proven technologies in other fields that require critical path experimentation to demonstrate feasibility for adaptation to specific EM needs. The underlying strategy is to ensure that private industry, other Federal Agencies, universities, and DOE National Laboratories are major participants in developing and deploying new and emerging technologies. To this end, about 125 different new and emerging technologies are being developed through Innovation Investment Area`s (IIA) two program elements: RDDT&E New Initiatives (RD01) and Interagency Agreements (RD02). Both of these activities are intended to foster research and development partnerships so as to introduce innovative technologies into other OTD program elements for expedited evaluation.

  11. Defense Science and Technology Innovation Teams: Mechanisms and Indicators for Indigenous Innovation in China

    E-Print Network [OSTI]

    WRIGHT, Darren J.

    2015-01-01T23:59:59.000Z

    STUDY OF INNOVATION AND TECHNOLOGY IN CHINA RESEARCH BRIEFThe Study of Innovation and Technology in China (SITC) is aDefense Science and Technology Innovation Teams: Mechanisms

  12. Technology Innovation Program Guidelines and Documentation

    E-Print Network [OSTI]

    Magee, Joseph W.

    #12;Technology Innovation Program Guidelines and Documentation Requirements for Research Involving ............................................................................ 5 F. Required Documentation.............................................................................. 16 D. Required Documentation

  13. Technology Innovation Honoring Students, Faculty, and Staff

    E-Print Network [OSTI]

    Chapman, Michael S.

    2012 Technology Innovation Awards Honoring Students, Faculty, and Staff for their Dedication Portland, Oregon Sponsored by: #12;2012 Technology Innovation Awards WELCOME & AWARDS REMARKS Andrew R.O. Watson, PhD, CLP Interim Director, Technology Transfer Technology Transfer and Business Development

  14. TECHNOLOGY INNOVATION PROGRAM National Institute of Standards and Technology

    E-Print Network [OSTI]

    Magee, Joseph W.

    TECHNOLOGY INNOVATION PROGRAM National Institute of Standards and Technology Gaithersburg, MD 20899 ADVANCED TECHNOLOGIES FOR CIVIL INFRASTRUCTURE The Technology Innovation Program (TIP) at the National Institute of Standards and Technology was established to assist U.S. businesses and institutions of higher

  15. CHEVROLET | ELECTRIC | GREEN | SPARK EV | TECHNOLOGY. INNOVATION...

    Open Energy Info (EERE)

    CHEVROLET | ELECTRIC | GREEN | SPARK EV | TECHNOLOGY. INNOVATION & SOLUTIONS | GREENER VEHICLES Home There are currently no posts in this category. Syndicate content...

  16. Innovative Drivetrains in Electric Automotive Technology Education...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Merit Review 2014: Innovative Drivetrains in Electric Automotive Technology Education (IDEATE) Center for Electric Drive Transportation at the University of Michigan - Dearborn...

  17. Validation of Innovative Exploration Technologies for Newberry...

    Open Energy Info (EERE)

    Validation of Innovative Exploration Technologies for Newberry Volcano Geothermal Project Jump to: navigation, search Last modified on July 22, 2011. Project Title Validation of...

  18. Vehicle Technologies Office Announces $14 M in Funding for Innovative...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Announces 14 M in Funding for Innovative Technologies Vehicle Technologies Office Announces 14 M in Funding for Innovative Technologies January 16, 2015 - 4:26pm Addthis The...

  19. Innovative Learning Technology Initiative W.S. Hodgkiss

    E-Print Network [OSTI]

    Gleeson, Joseph G.

    Innovative Learning Technology Initiative (ILTI) W.S. Hodgkiss AVC Academic Personnel and Resources 29 October 2013 #12;Innovative Learning Technology Initiative (ILTI) · Established January 2013-16) #12;Innovative Learning Technology Initiative (ILTI) · Components · Courses and Course Components Goal

  20. Integrated Scenario-based Design Methodology for Collaborative Technology Innovation

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Integrated Scenario-based Design Methodology for Collaborative Technology Innovation Fabrice Forest information technology innovation with an end-to-end Human and Social Sciences assistance. This methodology Technological innovation often requires large scale collaborative partnership between many heterogeneous

  1. White Papers Submitted to the Technology Innovation Program

    E-Print Network [OSTI]

    Magee, Joseph W.

    White Papers Submitted to the Technology Innovation Program The Technology Innovation Program (TIP) at the National Institute of Standards and Technology was established laboratories and nonprofit research institutions, to support, promote, and accelerate innovation in the U

  2. Innovative Energy Technologies: The Next Generation

    E-Print Network [OSTI]

    Andrews, Peter B.

    Innovative Energy Technologies: The Next Generation T E C H N O L O G Y G U I D E #12;Our lifestyle is sustained by energy. Technologies developed at Carnegie Mellon have the ability to enhance energy generation Generation Energy Technologies? 7 How Do We Realize the Benefits of Next Generation Energy Technologies? 9

  3. Innovative Energy Efficiency, Renewable Energy, and Grid Technology...

    Energy Savers [EERE]

    Innovative Energy Efficiency, Renewable Energy, and Grid Technology Update Innovative Energy Efficiency, Renewable Energy, and Grid Technology Update April 29, 2015 11:00AM to...

  4. The Geothermal Technologies Office Invests $18 Million for Innovative...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The Geothermal Technologies Office Invests 18 Million for Innovative Projects The Geothermal Technologies Office Invests 18 Million for Innovative Projects The McGuiness Hills...

  5. Innovative High-Performance Deposition Technology for Low-Cost...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Innovative High-Performance Deposition Technology for Low-Cost Manufacturing of OLED Lighting Innovative High-Performance Deposition Technology for Low-Cost Manufacturing of OLED...

  6. Technology Strategy Board Driving Innovation

    E-Print Network [OSTI]

    Anderson, Jim

    six months to three years. Business partners contribute the balance of costs while reaping and innovation that will provide the inspiration and energy for UK businesses to emerge from these uncertain and profits from innovative ideas and in the longer term provides UK business with leadership and energy

  7. Innovative Mobile Technologies for Asset Tracking 

    E-Print Network [OSTI]

    Liko, W.

    2013-01-01T23:59:59.000Z

    ICEBO Session 15 - Innovative Mobile Technologies for Asset Tracking Agenda ? Learn how clients have mobilized their enterprise data to increase the consistent capture and reporting of important building information, from lease data to work...

  8. COLLOQUIUM: Advanced Simulation for Technology Innovation and...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    27, 2015, 4:00pm to 5:30pm Colloquia MBG Auditorium COLLOQUIUM: Advanced Simulation for Technology Innovation and Science Discovery Dr. Scott Stanton ANSYS, Inc. Colloquium...

  9. Technology innovation in financial services industry

    E-Print Network [OSTI]

    Roxo da Fonseca, Gustavo J. C. (Gustavo José Costa), 1967-

    2004-01-01T23:59:59.000Z

    Over the last few decades, we have seen an enormous evolution in the financial services industry driven by technology innovations. Indeed, we cannot imagine the current financial system without electronic fund transfers, ...

  10. Advancing healthcare technology through insight, innovation, and leadership

    E-Print Network [OSTI]

    Soloveichik, David

    Advancing healthcare technology through insight, innovation, and leadership Master of Translational medical technologies and improving healthcare delivery? Successful medical innovation requires more than of medical innovators. Applications are open to engineers, scientists, and clinicians with a passion

  11. Innovative and Alternative Technology Assessment Manual

    SciTech Connect (OSTI)

    None

    1980-02-01T23:59:59.000Z

    This four chapter, six appendix manual presents the procedures and methodology as well as the baseline costs and energy information necessary for the analysis and evaluation of innovative and alternative technology applications submitted for federal grant assistance under the innovative and alternative technology provisions of the Clean Water Act of 1977. The manual clarifies and interprets the intent of Congress and the Environmental Protection Agency in carrying out the mandates of the innovative and alternative provisions of the Clean Water Act of 1977. [DJE 2005

  12. SEAMIST{trademark}. Innovative technology summary report

    SciTech Connect (OSTI)

    NONE

    1995-08-01T23:59:59.000Z

    SEAMIST has been demonstrated and deployed as an innovative tool to better access the subsurface for characterization and monitoring of contaminants in both vertical and horizontal boreholes. The technology has been developed by industry with assistance from DOE`s Office of Technology Development to ensure it meets the needs of the environmental restoration market.

  13. Vehicle Technologies Office Merit Review 2014: Innovative Cell...

    Office of Environmental Management (EM)

    Innovative Cell Materials and Design for 300 Mile Range EVs Vehicle Technologies Office Merit Review 2014: Innovative Cell Materials and Design for 300 Mile Range EVs Presentation...

  14. Innovative Technology Development Program. Final summary report

    SciTech Connect (OSTI)

    Beller, J.

    1995-08-01T23:59:59.000Z

    Through the Office of Technology Development (OTD), the U.S. Department of Energy (DOE) has initiated a national applied research, development, demonstration, testing, and evaluation program, whose goal has been to resolve the major technical issues and rapidly advance technologies for environmental restoration and waste management. The Innovative Technology Development (ITD) Program was established as a part of the DOE, Research, Development, Demonstration, Testing, and Evaluation (RDDT&E) Program. The plan is part of the DOE`s program to restore sites impacted by weapons production and to upgrade future waste management operations. On July 10, 1990, DOE issued a Program Research and Development Announcement (PRDA) through the Idaho Operations Office to solicit private sector help in developing innovative technologies to support DOE`s clean-up goals. This report presents summaries of each of the seven projects, which developed and tested the technologies proposed by the seven private contractors selected through the PRDA process.

  15. Centrifugal shot blasting. Innovative technology summary report

    SciTech Connect (OSTI)

    Not Available

    1999-07-01T23:59:59.000Z

    At the US Department of Energy (DOE) Fernald Environmental Management Project (FEMP), the Facilities Closure and Demolition Projects Integrated Remedial Design/Remedial Action (RD/RA) work plan calls for the removal of one inch (1 in) depth of concrete surface in areas where contamination with technetium-99 has been identified. This report describes a comparative demonstration between two concrete removal technologies: an innovative system using Centrifugal Shot Blasting (CSB) and a modified baseline technology called a rotary drum planer.

  16. The Human Dimension in Chinese Defense Science, Technology, and Innovation: An Overview

    E-Print Network [OSTI]

    CHEUNG, Tai Ming

    2015-01-01T23:59:59.000Z

    STUDY OF INNOVATION AND TECHNOLOGY IN CHINA RESEARCH BRIEFSTI. The Study of Innovation and Technology in China (SITC)in Science and Technology Innovation that was established in

  17. Title XVII-Innovative Technology Loan Guarantee Program under ARRA |

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed offOCHCO Overview OCHCOSystems Analysis Success| Department of EnergyTimothy J. MeeksDepartment

  18. Title XVII-Innovative Technology Loan Guarantee Program under ARRA |

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently AskedEnergyIssuesEnergy SolarRadioactiveI Disposal Sites Annual ReportDepartment of

  19. BEST PAPER PROCEEDING ACADEMY OF MANAGEMENT Technology and Innovation Management

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    BEST PAPER PROCEEDING ACADEMY OF MANAGEMENT Technology and Innovation Management Philadelphia, 6 FOURCADE ESCP-EAP, Paris ABSTRACT How firms combine incremental and radical innovation? The ambidextrous exploring new businesses and technologies (Dougherty, 1992 ; Leonard-Barton, 1992). Several organizational

  20. OPTIONS POLITIQUES anada's Science, Technology and Innovation System

    E-Print Network [OSTI]

    Volesky, Bohumil

    OPTIONS POLITIQUES JUIN 2009 8 C anada's Science, Technology and Innovation System: State, Technology and Innovation Council (STIC) presented its State of the Nation 2008 report. It presents an overview of Canada's sci- ence, technology and innovation system, charts our progress over time

  1. Annual Global Conference on Entrepreneurship and Technology Innovation (AGCETI 2010)

    E-Print Network [OSTI]

    Srivastava, Kumar Vaibhav

    Annual Global Conference on Entrepreneurship and Technology Innovation (AGCETI 2010) 16 ­ 18th technology innovation and management are inherently linked to the fostering and sustaining of competitive on Entrepreneurship and Technology Innovation was organized at IITK. The intention was to highlight the criticality

  2. DoD, Energy Security and Technological Innovation

    Broader source: Energy.gov (indexed) [DOE]

    DoD, Energy Security and Technological Innovation Dorothy Robyn Deputy Under Secretary of Defense (Installations & Environment) SunShot Grand Challenge Summit and Technology Forum...

  3. Hurdling Barriers Through Market Uncertainty: Case Studies in Innovative Technology Adoption

    E-Print Network [OSTI]

    Hurdling Barriers Through Market Uncertainty: Case Studies in Innovative Technology Adoption technologies. This paper examines three case studies of innovative technology adoption: retrofit of time these circumstances as "innovative technology adoption." This paper presents case studies of three innovative

  4. Technology Venturing and Innovation Management The MSc programme Industrial Engineering and Management (IEM) has four

    E-Print Network [OSTI]

    Twente, Universiteit

    Technology Venturing and Innovation Management The MSc programme Industrial Engineering. One of the topics that IEM students can focus on is Technology Venturing en Innovation Management & Organization of Technology Innovation (191810840), or b) Organisation, Technology & Innovation (201000088) n

  5. Technology Innovation Program The Technology Innovation Program (TIP) was established at the National Institute of Standards and

    E-Print Network [OSTI]

    Magee, Joseph W.

    Technology Innovation Program The Technology Innovation Program (TIP) was established at the National Institute of Standards and Technology (NIST), U.S. Department of Commerce, by the 2007 America, promote, and accelerate innovation in the United States through high-risk, high-reward research in areas

  6. Innovative breakthrough in `cancer seeing' technology wins coveted industry accolade Institution of Engineering and Technology names 2014 Innovation Award winners

    E-Print Network [OSTI]

    Wagner, Stephan

    Innovative breakthrough in `cancer seeing' technology wins coveted industry accolade Institution of Engineering and Technology names 2014 Innovation Award winners Thursday 20 November ­ An innovation in cancer an Institution of Engineering and Technology (IET) Award. A consortium of hospital and academia have won

  7. Advanced Technology Vehicles Manufacturing (ATVM) Loan Program | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels DataEnergyDepartment ofATVM LoanActiveMission »AdvancedServices »Sensorsof

  8. Energy Department Finalizes $337 Million Loan Guarantee to Mesquite...

    Energy Savers [EERE]

    337 Million Loan Guarantee to Mesquite Solar 1 for Innovative Solar Power Plant Energy Department Finalizes 337 Million Loan Guarantee to Mesquite Solar 1 for Innovative Solar...

  9. Understanding energy technology developments from an innovation system perspective

    E-Print Network [OSTI]

    Understanding energy technology developments from an innovation system perspective Mads Borup1. This paper presents an innovation systems analysis of new and emerging energy technologies in Denmark. The study focuses on five technology areas: bio fuels, hydrogen technology, wind energy, solar cells

  10. Determinants of the Pace of Global Innovation in Energy Technologies

    E-Print Network [OSTI]

    Kaur, Jasleen

    Understanding the factors driving innovation in energy technologies is of critical importance to mitigating climate change and addressing other energy-related global challenges. Low levels of innovation, measured in terms ...

  11. Technological, Organisational, and Social Innovation as Pathways to Sustainability

    E-Print Network [OSTI]

    Ashford, Nicholas

    2001-01-01T23:59:59.000Z

    The purposes of this chapter is to delve more deeply into the processes and determinants of technological, organisational, and social innovation and to discuss the instruments and policies to stimulate the kinds of innovation ...

  12. Steam vacuum cleaning. Innovative technology summary report

    SciTech Connect (OSTI)

    NONE

    1999-05-01T23:59:59.000Z

    The US Department of Energy (DOE) continually seeks safer and more cost-effective remediation technologies for use in the decontamination and decommissioning (D and D) of nuclear facilities. The baseline technology currently used for washing debris is a high-pressure water cleaning (HPWC) system. The system used at the FEMP is the Hotsy{reg_sign} Model 550B HPWC. Although the HPWC technology has functioned satisfactorily, improvements are being sought in areas related to reduced liquid waste volume, increased productivity, increased washing effectiveness, and decreased airborne contamination. An innovative technology that offers potential improvements in these areas is a steam vacuum cleaning (SVC) system that integrates high-pressure steam cleaning with a vacuum recovery sub-system that simultaneously collects dislodged contaminants thereby reducing airborne contamination. The SVC system selected for demonstration at the FEMP was the Kelly{trademark} Decontamination System shown. This report provides comparative performance and cost analyses between the Hotsy HPWC system and the Kelly Decontamination System. Both technologies were demonstrated at the FEMP site located at Fernald, Ohio from July 29, 1996 through August 15, 1996. The demonstrations were conducted at the FEMP Plant 1 as part of the LSTD project sponsored by the Deactivation and Decommissioning Focus Area (DDFA) of the US DOE`s Office of Science and Technology.

  13. Proposals for Technology Innovation Projects Student technology fees are intended to enhance student learning and the student

    E-Print Network [OSTI]

    Farritor, Shane

    Proposals for Technology Innovation Projects Student technology fees scale if effective. Timeline Applications for Technology Innovation Projects innovative ideas about using technology? 2) Is the project designed to be led

  14. An Easy Way to Find Patents for Innovative Technologies

    Broader source: Energy.gov [DOE]

    Browse through thousands of U.S. patents for Energy Department-funded technologies with the new Visual Patent Finder tool for the Energy Innovation Portal.

  15. THE GEOGRAPHY OF INNOVATION : CHALLENGES TO TECHNOLOGY POLICY WITHIN REGIONS

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    1 THE GEOGRAPHY OF INNOVATION : CHALLENGES TO TECHNOLOGY POLICY WITHIN REGIONS MURIEL FADAIRO, to access knowledge, to use knowledge." (P. Maskell, 2001) The "Geography of Innovation"1 is based of the innovation activities. It focuses on an attempt to measure the spatial dimension of knowledge externalities

  16. The Business of Expectations: How Promissory Organisations Shape Technology & Innovation 

    E-Print Network [OSTI]

    Pollock, N.; Williams, R.

    2010-01-01T23:59:59.000Z

    The business of technological expectations has yet to be thoroughly explored by scholars interested in the role of expectations and visions in the emergence of technological innovations. However, intermediaries specialising in the production...

  17. 1Center for Wireless Technology Eindhoven Where innovation starts

    E-Print Network [OSTI]

    Franssen, Michael

    1Center for Wireless Technology Eindhoven Where innovation starts Department of Electrical Engineering Center for Wireless Technology Eindhoven #12;2 3Center for Wireless Technology Eindhoven Wireless Technology Eindhoven The Center for Wireless Technology The recent establishment of the Center for Wireless

  18. Innovative Grid Technologies Applied to Bioinformatics and Hurricane Mitigation

    E-Print Network [OSTI]

    Sadjadi, S. Masoud

    Innovative Grid Technologies Applied to Bioinformatics and Hurricane Mitigation Rosa BADIA a Gargi and hurricane mitigation. This paper describes some of these innovative technologies, such as the support to provide solutions to pharmagenomics problems and hurricane prediction ensemble simulations. Keywords. Meta

  19. How to explore new business models for technological innovations

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    How to explore new business models for technological innovations Valérie Chanal Grenoble University also involved business model innovation. Exploration of new business models is however particularly to target. This article proposes a scenario-based method for exploring business models for technological

  20. SEC. 3012. TECHNOLOGY INNOVATION PROGRAM. (a) REPEAL OF ADVANCED TECHNOLOGY PROGRAM.--Section 28

    E-Print Network [OSTI]

    Magee, Joseph W.

    SEC. 3012. TECHNOLOGY INNOVATION PROGRAM. (a) REPEAL OF ADVANCED TECHNOLOGY PROGRAM.--Section 28 of the National Institute of Standards and Technology Act (15 U.S.C. 278n) is repealed. (b) ESTABLISHMENT OF TECHNOLOGY INNOVATION PROGRAM.-- The National Institute of Standards and Technology Act (15 U.S.C. 271 et seq

  1. The J-20 Fighter Aircraft and the State of China's Defense Science, Technology, and Innovation Potential

    E-Print Network [OSTI]

    CHEUNG, Tai Ming

    2011-01-01T23:59:59.000Z

    on the Study of Innovation and Technology in China (SITC),The Study of Innovation and Technology in China (SITC) is as Defense Science, Technology, and Innovation Potential Tai

  2. The Role of Congress in U.S. Science, Technology, and Innovation Policy

    E-Print Network [OSTI]

    GOLDSTON, David

    2013-01-01T23:59:59.000Z

    area. The Study of Innovation and Technology in China (SITC)STUDY OF INNOVATION AND TECHNOLOGY IN CHINA POLICY BRIEF STIin U.S. Science, Technology, and Innovation Policy David

  3. Key Leaders in U.S. Science, Technology, and Innovation Policy

    E-Print Network [OSTI]

    GOLDSTON, David

    2013-01-01T23:59:59.000Z

    STUDY OF INNOVATION AND TECHNOLOGY IN CHINA POLICY BRIEF STIrole. The Study of Innovation and Technology in China (SITC)in U.S. Science, Technology, and Innovation Policy David

  4. The China Aerospace Science and Technology Corporation and the Concept of Integrated Innovation: A Case Study

    E-Print Network [OSTI]

    POLLPETER, Kevin

    2013-01-01T23:59:59.000Z

    on the Study of Innovation and Technology in China at the UCThe Study of Innovation and Technology in China (SITC) is ain its pursuit of technology innovation. In order to conduct

  5. Preliminary -November 30, 2010 INNOVATE SYMPOSIUM: Globalization and Technology in China

    E-Print Network [OSTI]

    Wu, Yih-Min

    Preliminary - November 30, 2010 INNOVATE SYMPOSIUM: Globalization and Technology in China examination of economic and technological development and innovation between China and their own home study of factors affecting their respective technology sectors. The INNOVATE itinerary

  6. Evolution and System Characteristics of China’s Science, Technology, and Innovation Policies

    E-Print Network [OSTI]

    WANG, Yuan

    2013-01-01T23:59:59.000Z

    STUDY OF INNOVATION AND TECHNOLOGY IN CHINA POLICY BRIEF STIThe Study of Innovation and Technology in China (SITC) is aof China’s Science, Technology, and Innovation Policies WANG

  7. New DOE Reports on Smart Grid Technologies Seek to Promote Innovation...

    Office of Environmental Management (EM)

    Reports on Smart Grid Technologies Seek to Promote Innovation, Privacy and Access New DOE Reports on Smart Grid Technologies Seek to Promote Innovation, Privacy and Access October...

  8. Technology certification and technology acceptance: Promoting interstate cooperation and market development for innovative technologies

    SciTech Connect (OSTI)

    Brockbank, B.R.

    1995-03-01T23:59:59.000Z

    In the past two years, public and private efforts to promote development and deployment of innovative environmental technologies have shifted from the analysis of barriers to the implementation of a variety of initiatives aimed at surmounting those barriers. Particular attention has been directed at (1) streamlining fragmented technology acceptance processes within and among the states, and (2) alleviating disincentives, created by inadequate or unverified technology cost and performance data, for users and regulators to choose innovative technologies. Market fragmentation currently imposes significant cost burdens on technology developers and inhibits the investment of private capital in environmental technology companies. Among the responses to these problems are state and federal technology certification/validation programs, efforts to standardize cost/performance data reporting, and initiatives aimed at promoting interstate cooperation in technology testing and evaluation. This paper reviews the current status of these initiatives, identifies critical challenges to their success, and recommends strategies for addressing those challenges.

  9. Ris Energy Report 5 Innovation in energy technologies 21 Introduction

    E-Print Network [OSTI]

    Risø Energy Report 5 Innovation in energy technologies 21 5 Introduction Innovation in energy in clean-energy research at the Us Department of Energy [1]. The European Union in its seventh Framework Pro- gramme is expected to increase energy R&D budgets, not only for reasons of energy and climate

  10. ‘Cleaner innovation’? A political process approach to environmental aspects of process technology innovations 

    E-Print Network [OSTI]

    Markusson, Nils

    2008-01-01T23:59:59.000Z

    This thesis seeks to improve our understanding of the integration of explicit environmental motives into innovation processes. This will be done by applying insights from the social shaping of technology field as well ...

  11. Call for expression of interest EU-Brazil Technology and Innovation Forum

    E-Print Network [OSTI]

    Call for expression of interest EU-Brazil Technology and Innovation Forum Participation to B2B targeting research and innovation actors. Among them, this year the EU-Brazil Technology and Innovation and Innovation Forum The EU-Brazil Technology and Innovation Forum is organized by the B.BICE+ consortium

  12. Energy Department Makes Additional $4 Billion in Loan Guarantees...

    Office of Environmental Management (EM)

    Makes Additional 4 Billion in Loan Guarantees Available for Innovative Renewable Energy and Efficient Energy Projects Energy Department Makes Additional 4 Billion in Loan...

  13. On singularities in combination-driven models of technological innovation

    E-Print Network [OSTI]

    Solé, Ricard V; Valverde, Sergi

    2014-01-01T23:59:59.000Z

    It has been suggested that innovations occur mainly by combination: the more inventions accumulate, the higher the probability that new inventions are obtained from previous designs. Additionally, it has been conjectured that the combinatorial nature of innovations naturally leads to a singularity: at some finite time, the number of innovations should diverge. Although these ideas are certainly appealing, no general models have been yet developed to test the conditions under which combinatorial technology should become explosive. Here we present a generalised model of technological evolution that takes into account two major properties: the number of previous technologies needed to create a novel one and how rapidly technology ages. Two different models of combinatorial growth are considered, involving different forms of ageing. When long-range memory is used and thus old inventions are available for novel innovations, singularities can emerge under some conditions with two phases separated by a critical boun...

  14. Small Business Innovation Research and Small Business Technology Transfer

    Broader source: Energy.gov [DOE]

    The DOE Small Business Innovation Research (SBIR) and Small Business Technology Transfer (STTR) programs are highly competitive opportunities that encourage U.S.-based small businesses to engage in...

  15. 2004 INDEX OF INNOVATION AND TECHNOLOGY TRI-CITIES, WASHINGTON

    E-Print Network [OSTI]

    such as traffic congestion and high cost of living o Has two factors impeding its technology-based economic Tax Burden 14 Labor Costs 15 Growth 16 Employment in Technology Firms 17 Growth in Startups 172004 INDEX OF INNOVATION AND TECHNOLOGY TRI-CITIES, WASHINGTON JULY 2004 #12;PNNL-SA-42092 2004

  16. Long Term Innovative Technologies | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport(FactDepartment ofLetterEconomy andTerms Loan TermsLong Island HTS Power CableLong

  17. TED: Technology and Economic Development International Conference on Innovation, Technology and Knowledge Economics

    E-Print Network [OSTI]

    Yanikoglu, Berrin

    TED: Technology and Economic Development 3rd International Conference on Innovation, Technology and Knowledge Economics Ankara, 24th -26th June An Empirical Study into the Determinants of Innovativeness for Industrial Management (TUSSIDE), 41401 Gebze, Kocaeli, Turkey 3 Gebze Institute of Technology, Department

  18. Vehicle Technologies Office Merit Review 2015: Innovative Technologies for Converters and Chargers

    Broader source: Energy.gov [DOE]

    Presentation given by Oak Ridge National Laboratory at 2015 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about innovative...

  19. Vehicle Technologies Office Merit Review 2014: Innovative Drivetrains in Electric Automotive Technology Education (IDEATE)

    Broader source: Energy.gov [DOE]

    Presentation given by University of Colorado at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about Innovative Drivetrains...

  20. Validation of Innovative Exploration Technologies for Newberry Volcano: LIDAR of Newberry Volcano 2012

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Jaffe, Todd

    Validation of Innovative Exploration Technologies for Newberry Volcano: LIDAR of Newberry Volcano 2012

  1. Energy Innovation Portal: Linking Energy Technologies with Market Opportunities (Revised) (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2012-01-01T23:59:59.000Z

    One page flyer that describes the EERE Energy Innovation Portal. Includes list of technology categories.

  2. Energy Investment Loan Program

    Broader source: Energy.gov [DOE]

    Mississippi offers low-interest loans for renewable energy and energy efficiency projects. Eligible renewable energy technologies include solar thermal, solar space heat, solar process heat,...

  3. Loan Guarantees and the Economics of Electricity Generating Technologies (released in AEO2007)

    Reports and Publications (EIA)

    2007-01-01T23:59:59.000Z

    The loan guarantee program authorized in Title XVII of EPACT2005 is not included in the Annual Energy Outlook 2007, because the Federal Credit Reform Act of 1990 requires congressional authorization of loan guarantees in an appropriations act before a federal agency can make a binding loan guarantee agreement. As of October 2006, Congress had not provided the legislation necessary for the Department of Energy (DOE) to implement the loan guarantee program (see Legislation and Regulations). In August 2006, however, DOE invited firms to submit pre-applications for the first $2 billion in potential loan guarantees.

  4. Innovative technology for contamination control in plasma processing

    SciTech Connect (OSTI)

    Selwyn, G.S.

    1994-10-01T23:59:59.000Z

    The causes and contributing factors to wafer contamination during plasma processing are discussed in the context of future technologies for controlling particle contamination by tool and process design and by the development of wafer dry cleaning technology. The importance of these developments is linked with the history of technological innovation and with the continuing evolution of the cleanroom from a highly developed facility for reducing ambient particle levels to an integrated, synergistic approach involving facilities and tooling for impeding the formation and transport of particles while also actively removing particles from sensitive surfaces. The methods, strategy and requirements for innovation in contamination control for plasma processing is discussed from a diachronic viewpoint.

  5. ResonantSonic drilling. Innovative technology summary report

    SciTech Connect (OSTI)

    NONE

    1995-04-01T23:59:59.000Z

    The technology of ResonantSonic drilling is described. This technique has been demonstrated and deployed as an innovative tool to access the subsurface for installation of monitoring and/or remediation wells and for collection of subsurface materials for environmental restoration applications. The technology uses no drilling fluids, is safe and can be used to drill slant holes.

  6. September 1997 Coord `97 Lucent Technologies Bell Labs Innovations

    E-Print Network [OSTI]

    Perry, Dewayne E.

    1 September 1997 Coord `97 Lucent Technologies Bell Labs Innovations Software Architecture and its Hill NJ 07974 dep@research.bell-labs.com www.bell-labs.com/~dep/ September 1997 Coord `97 Lucent Engineering · Issues of Emerging Significance September 1997 Coord `97 Lucent Technologies Bell Labs

  7. Office of Technology Transfer and Innovation Partnerships, Innovative Technologies Complex, Suite 2100 Mailing Address: PO Box 6000, Binghamton, New York 13902-6000

    E-Print Network [OSTI]

    Suzuki, Masatsugu

    Office of Technology Transfer and Innovation Partnerships, Innovative Technologies Complex, Suite 2100 Mailing Address: PO Box 6000, Binghamton, New York 13902-6000 Courier Address: Innovative Technologies Complex, 85 Murray Hill Rd., Binghamton, New York 13902 Telephone (607) 777-5870 Fax (607) 777

  8. Towards quantification of the role of materials innovation in overall technological development

    E-Print Network [OSTI]

    Magee, Christopher L.

    This article presents a method for quantitatively assessing the role of materials innovation in overall technological development. The method involves classifying the technical changes underlying the overall innovation ...

  9. Innovative Exploration Technologies Subprogram Overview | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport(Fact Sheet),EnergyImprovementINDIANManagement1,Innovative

  10. Technology Innovations and Experience Curves for Nitrogen Oxides Control Technologies

    E-Print Network [OSTI]

    Yeh, Sonia; Rubin, Edward S.; Taylor, Margaret R.

    2007-01-01T23:59:59.000Z

    including issues of technology and cost un- certainties, areon NO x Control Technologies and Cost Effectiveness forand other factors on technology cost trends (hence, the

  11. FY10 Engineering Innovations, Research and Technology Report

    SciTech Connect (OSTI)

    Lane, M A; Aceves, S M; Paulson, C N; Candy, J V; Bennett, C V; Carlisle, K; Chen, D C; White, D A; Bernier, J V; Puso, M A; Weisgraber, T H; Corey, B; Lin, J I; Wheeler, E K; Conway, A M; Kuntz, J D; Spadaccini, C M; Dehlinger, D A; Kotovsky, J; Nikolic, R; Mariella, R P; Foudray, A K; Tang, V; Guidry, B L; Ng, B M; Lemmond, T D; Chen, B Y; Meyers, C A; Houck, T L

    2011-01-11T23:59:59.000Z

    This report summarizes key research, development, and technology advancements in Lawrence Livermore National Laboratory's Engineering Directorate for FY2010. These efforts exemplify Engineering's nearly 60-year history of developing and applying the technology innovations needed for the Laboratory's national security missions, and embody Engineering's mission to ''Enable program success today and ensure the Laboratory's vitality tomorrow.'' Leading off the report is a section featuring compelling engineering innovations. These innovations range from advanced hydrogen storage that enables clean vehicles, to new nuclear material detection technologies, to a landmine detection system using ultra-wideband ground-penetrating radar. Many have been recognized with R&D Magazine's prestigious R&D 100 Award; all are examples of the forward-looking application of innovative engineering to pressing national problems and challenging customer requirements. Engineering's capability development strategy includes both fundamental research and technology development. Engineering research creates the competencies of the future where discovery-class groundwork is required. Our technology development (or reduction to practice) efforts enable many of the research breakthroughs across the Laboratory to translate from the world of basic research to the national security missions of the Laboratory. This portfolio approach produces new and advanced technological capabilities, and is a unique component of the value proposition of the Lawrence Livermore Laboratory. The balance of the report highlights this work in research and technology, organized into thematic technical areas: Computational Engineering; Micro/Nano-Devices and Structures; Measurement Technologies; Engineering Systems for Knowledge Discovery; and Energy Manipulation. Our investments in these areas serve not only known programmatic requirements of today and tomorrow, but also anticipate the breakthrough engineering innovations that will be needed in the future.

  12. Innovative Ideas and Technology | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItemResearch > The Energy Materials Center at CornellOf NSEC »INNOVATION Our

  13. A Guide for Preparing and Submitting White Papers to the Technology Innovation Program

    E-Print Network [OSTI]

    A Guide for Preparing and Submitting White Papers to the Technology Innovation Program October 2010 TECHNOLOGY INNOVATION PROGRAM National Institute of Standards and Technology U.S. Department of Commerce #12 competitions for the Technology Innovation Program (TIP) by offering ideas in the form of a white paper

  14. INFORMATION TECHNOLOGY INNOVATION: A VIEW OF LARGE CONTRACTORS1 T. Michael Toole, Member, ASCE

    E-Print Network [OSTI]

    Toole, T. Michael

    page 1 INFORMATION TECHNOLOGY INNOVATION: A VIEW OF LARGE CONTRACTORS1 T. Michael Toole, Member of technological innovations is whether diffusion is driven more by technology-push than by demand-pull mechanisms is to broaden the perspective on information technology (IT) innovation presented here at the congress

  15. Kicking Off the ARPA-E Energy Innovation Summit: Where Innovations in Energy Technology Are “Winning the Future”

    Broader source: Energy.gov [DOE]

    A preview of the ARPA-E Energy Innovation Summit, which showcases the most advanced and revolutionary breakthroughs in energy technology today.

  16. Technological development and innovation : selected policy implications

    E-Print Network [OSTI]

    Benson, Christopher Lee

    2012-01-01T23:59:59.000Z

    Technological development is one of the main drivers in economic progress throughout the world and is strongly linked to the creation of new industries, jobs, and wealth. This thesis attempts to better understand how a ...

  17. Methodology to manage process technology innovation

    E-Print Network [OSTI]

    Schweizer, Daniel

    2010-01-01T23:59:59.000Z

    The research conducted for this thesis was performed at "Company X", a U.S.-based engineered goods manufacturer. This project focused on the company's Advanced Manufacturing group and its process technology development ...

  18. Application of Innovative Technologies During Continuous Commissioning

    E-Print Network [OSTI]

    Joo, I. S.; Liu, M.; Wang, J.; Hansen, K.

    2003-01-01T23:59:59.000Z

    ,436 square feet was used as a case study building. The new technologies are a variable speed drive volumetric tracking method for building pressure control, a recently developed fan airflow measurement method for duct static pressure reset, and a new...

  19. Fiona Murray is the David Sarnoff Professor of Management of Technology, an Associate Professor of Technological Innovation,

    E-Print Network [OSTI]

    Polz, Martin

    , an Associate Professor of Technological Innovation, Entrepreneurship, and Strategic Management Fiona Murray is the David Sarnoff Professor of Management of Technology, the commercialization of science and the economics of entrepreneurship and innovation. She has

  20. Germany and China -an Innovative Partnership in Information Technology

    E-Print Network [OSTI]

    Weske, Mathias

    Germany and China - an Innovative Partnership in Information Technology Hasso Plattner Institute Landmark 2007" "Germany ­ Land of Ideas" campaign Jürgen FITSCHEN, Member of the Group Executive Committee, and Chairman of the Management Committee, Germany, of Deutsche Bank Keynote Speech The importance of the German

  1. Innovative technology summary report: ResonantSonic{reg_sign} drilling

    SciTech Connect (OSTI)

    NONE

    1995-04-01T23:59:59.000Z

    ResonantSonic{trademark} drilling has been demonstrated and deployed as an innovative tool to access the subsurface for installation of monitoring and/or remediation wells and for collection of subsurface materials for environmental restoration applications. The technology has been developed by industry with assistance from the U.S. Department of Energy (DOE) Office of Technology Development to ensure it meets the needs of the environmental restoration market.

  2. facilities to develop innovative technologies in partnership

    E-Print Network [OSTI]

    and characterizing the heat, air and moisture performance of highly energy efficient wall assemblies, as well chambers that can aid in developing improved heating, ventilation and air-conditioning (HVAC) systems Fall 2014 Jeffrey Munk, building technologies researcher, examines a heat pump water heater, which

  3. Innovative Laser Ablation Technology for Surface Decontamination

    SciTech Connect (OSTI)

    Chen, Winston C. H.

    2003-06-01T23:59:59.000Z

    The objective of this project is to develop a novel laser ablation in liquid for surface decontamination. It aims to achieve more efficient surface decontamination without secondary contamination. Another aim is to make this surface decontamination technology becomes economically feasible for large scale decontamination.

  4. Building a national technology and innovation infrastructure for an aging society

    E-Print Network [OSTI]

    Lau, Jasmin

    2006-01-01T23:59:59.000Z

    This thesis focuses on the potential of strategic technology innovation and implementation in sustaining an aging society, and examines the need for a comprehensive national technology and innovation infrastructure in the ...

  5. A Critical Analysis of Technological Innovation and Economic Development in Southern California's Urban Water Reuse And Recycling Industry

    E-Print Network [OSTI]

    Pilip-Florea, Shadrach Jay

    2012-01-01T23:59:59.000Z

    Ed. ), Systems of Innovation: Technologies, Institutions andEconomics of Innovation and New Technology, 8:1-2, 5-25Economics of Innovation and New Technology, 8:1-2: 79-103

  6. Determinants of the Pace of Global Innovation in Energy Technologies

    E-Print Network [OSTI]

    Bettencourt, Luis M A; Kaur, Jasleen

    2012-01-01T23:59:59.000Z

    Understanding the factors driving innovation in energy technologies is of critical importance to mitigating climate change and addressing other energy-related global challenges. Low levels of innovation, measured in terms of energy patent filings, were noted in the 1980s and 90s as an issue of concern and were attributed to low investment in public and private research and development (R&D). Here we build a comprehensive global database of energy patents covering the period 1970-2009 which is unique in its temporal and geographical scope. Analysis of the data reveals a recent, marked departure from historical trends. A sharp increase in rates of patenting has occurred over the last decade, particularly in renewable technologies, despite continued low levels of R&D funding. To solve the puzzle of fast innovation despite modest R&D increases we develop a model that explains the nonlinear response observed in the empirical data of technological innovation to various types of investment. The model rev...

  7. Dynamic underground stripping. Innovative technology summary report

    SciTech Connect (OSTI)

    NONE

    1995-04-01T23:59:59.000Z

    Dynamic Underground Stripping (DUS) is a combination of technologies targeted to remediate soil and ground water contaminated with organic compounds. DUS is effective both above and below the water table and is especially well suited for sites with interbedded sand and clay layers. The main technologies comprising DUS are steam injection at the periphery of a contaminated area to heat permeable subsurface areas, vaporize volatile compounds bound to the soil, and drive contaminants to centrally located vacuum extraction wells; electrical heating of less permeable sediments to vaporize contaminants and drive them into the steam zone; and underground imaging such as Electrical Resistance Tomography to delineate heated areas to ensure total cleanup and process control. A full-scale demonstration was conducted on a gasoline spill site at Lawrence Livermore National Laboratory in Livermore, California from November 1992 through December 1993.

  8. Demonstrations and commercial applications of innovative sediment removal technologies

    SciTech Connect (OSTI)

    Pelletier, J.P. [Environment Canada, Toronto, Ontario (Canada)

    1995-12-31T23:59:59.000Z

    The Contaminated Sediment Removal Program (CSRP) of Environment Canada was founded in November 1990 following a request from the Great Lakes Cleanup Fund to the Environmental Protection Service-Ontario Region to provide the leadership in the identification of removal technologies and procedures for contaminated sediments in the Great Lakes. Following a request for proposal issued by the CSRP, proposals were received from vendors of innovative sediment removal technologies to conduct contaminated sediment removal demonstrations in different Areas of Concern (AOCs) on the Canadian side of the Great Lakes. In 1992, the CSRP conducted the demonstration of two innovative sediment removal technologies at three different sites. The Cable Arm 100E clamshell bucket was demonstrated in Toronto and Hamilton Harbors, while the Pneuma Pump was demonstrated in Collingwood Harbor. Those three demonstrations led to the first Canadian commercial applications of the Cable Arm 100E clamshell bucket in Pickering, Ontario, and of the Pneuma Pump in Collingwood, Ontario.

  9. Innovative Mobile Technologies for Asset Tracking

    E-Print Network [OSTI]

    Liko, W.

    2013-01-01T23:59:59.000Z

    orders to space & occupancy costs. ? Top 5 lessons learned implementing a mobile solution Who We Are ? Experts in both Real Property and Facilities Management Business and Technology ? Over 250 years of combined experience that encompasses facility... assigned by layer and not by block or object ? Do you have nested blocks ? Complexity and detail of predefined blocks Facility Surveys Facility Surveys Facility Surveys Workflow: do more in fewer steps with mobility ? Eliminate paper with instant...

  10. Innovative technology summary report: Transportable vitrification system

    SciTech Connect (OSTI)

    NONE

    1998-09-01T23:59:59.000Z

    At the end of the cold war, many of the Department of Energy`s (DOE`s) major nuclear weapons facilities refocused their efforts on finding technically sound, economic, regulatory compliant, and stakeholder acceptable treatment solutions for the legacy of mixed wastes they had produced. In particular, an advanced stabilization process that could effectively treat the large volumes of settling pond and treatment sludges was needed. Based on this need, DOE and its contractors initiated in 1993 the EM-50 sponsored development effort required to produce a deployable mixed waste vitrification system. As a consequence, the Transportable Vitrification System (TVS) effort was undertaken with the primary requirement to develop and demonstrate the technology and associated facility to effectively vitrify, for compliant disposal, the applicable mixed waste sludges and solids across the various DOE complex sites. After 4 years of development testing with both crucible and pilot-scale melters, the TVS facility was constructed by Envitco, evaluated and demonstrated with surrogates, and then successfully transported to the ORNL ETTP site and demonstrated with actual mixed wastes in the fall of 1997. This paper describes the technology, its performance, the technology applicability and alternatives, cost, regulatory and policy issues, and lessons learned.

  11. One of the first activities of the High Value Manufacturing technology and innovation

    E-Print Network [OSTI]

    Mottram, Nigel

    Results of "Future Trends" Study HVM Technology and Innovation Centre news Investing in the future W announced that over £200m will be invested in a network of elite technology and innovation centres in Coventry. Newsletter of the High Value Manufacturing Technology and Innovation Centre related

  12. Vice Dean for Innovative Healthcare Technologies University of South Carolina School of Medicine

    E-Print Network [OSTI]

    Almor, Amit

    6/25/2012 Vice Dean for Innovative Healthcare Technologies University of South Carolina School for the position of Vice Dean for Innovative Healthcare Technologies. The position is expected to be filled from of the Position The Vice Dean for Innovative Healthcare Technologies is a senior-level administrative position (.2

  13. Informing public policy on science and innovation: the Advanced Technology Program's experience

    E-Print Network [OSTI]

    Informing public policy on science and innovation: the Advanced Technology Program's experience of Agriculture and the Kauffman Foundation. Keywords Innovation measurement Á Data Enclave Á Advanced Technology related to the processes of innovation and technological change, and the effects of government policy

  14. SVV Technology Innovations SVVTI | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro Industries Pvt Ltd Jump to:RoscommonSBY Solutions Jump to:SMInformationSVV Technology

  15. Accelerating energy technology innovation at Cyclotron Road

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy China 2015ofDepartmentDepartment of2 of 5) ALARAManager(Decemberenergy technology

  16. Building Energy Efficiency Technologies - Energy Innovation Portal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadapInactiveVisiting the TWPSuccess Stories Siteandscience, and technologyA Science DMZ

  17. Revolving Loan Funds: Basics and Best Practices

    Broader source: Energy.gov (indexed) [DOE]

    Opportunity * How to Setup an RLF * Best Practices * Risk Management * Results National Renewable Energy Laboratory Innovation for Our Energy Future Summary * A revolving loan...

  18. Installation of an innovative remedial technology

    SciTech Connect (OSTI)

    Hines, B. [CDM Federal Programs Corp., Kevil, KY (United States)

    1995-12-31T23:59:59.000Z

    The major goal of the Lasagna{trademark} project was to design, construct, install, and operate an in situ remediation system in low-permeability soil. A new technology--the Lasagna process--uses electro-osmosis to move contaminated groundwater through treatment zones. The treatment zones are installed in contaminated soils, thereby forming an integrated in situ remedial process. Electro-osmosis, well known for its effectiveness and extremely low power consumption, uses a direct current to cause Groundwater to travel through low-permeability soil. When a bench-scale version of the technology was 98 percent effective in removing contamination, an actual field test was the next step. The site chosen for this first field effort was the DOE-owned Paducah Gaseous Diffusion Plant located in Paducah, Kentucky. The target contaminant for this project was trichloroethylene (TCE) because it is found at many sites across the country and is present at approximately 60 percent of DOE`s sites.

  19. Innovative forming and fabrication technologies : new opportunities.

    SciTech Connect (OSTI)

    Davis, B.; Hryn, J.; Energy Systems; Kingston Process Metallurgy, Inc.

    2008-01-31T23:59:59.000Z

    The advent of light metal alloys and advanced materials (polymer, composites, etc.) have brought the possibility of achieving important energy reductions into the full life cycle of these materials, especially in transportation applications. 1 These materials have gained acceptance in the aerospace industry but use of light metal alloys needs to gain wider acceptance in other commercial transportation areas. Among the main reasons for the relatively low use of these materials are the lack of manufacturability, insufficient mechanical properties, and increased material costs due to processing inefficiencies. Considering the enormous potential energy savings associated with the use of light metal alloys and advanced materials in transportation, there is a need to identify R&D opportunities in the fields of materials fabrication and forming aimed at developing materials with high specific mechanical properties combined with energy efficient processes and good manufacturability. This report presents a literature review of the most recent developments in the areas of fabrication and metal forming focusing principally on aluminum alloys. In the first section of the document, the different sheet manufacturing technologies including direct chill (DC) casting and rolling, spray forming, spray rolling, thin slab, and strip casting are reviewed. The second section of the document presents recent research on advanced forming processes. The various forming processes reviewed are: superplastic forming, electromagnetic forming, age forming, warm forming, hydroforming, and incremental forming. Optimization of conventional forming processes is also discussed. Potentially interesting light metal alloys for high structural efficiency including aluminum-scandium, aluminum-lithium, magnesium, titanium, and amorphous metal alloys are also reviewed. This section concludes with a discussion on alloy development for manufacturability. The third section of the document reviews the latest developments in fiber-reinforced composite materials. Emerging curing processes are presented along with a discussion on the possible developments in biocomposite materials. The fourth section presents recent developments in the fabrication of bulk nanomaterials and nanoparticles reinforced materials. Advanced joining technologies are presented in the fifth section. Future research is proposed in the last section.

  20. Alternative Landfill Cover. Innovative Technology Summary Report

    SciTech Connect (OSTI)

    NONE

    2000-12-01T23:59:59.000Z

    The primary purpose of an engineered cover is to isolate the underlying waste. A key element to isolating the wastes from the environment, engineered covers should minimize or prevent water from infiltrating into the landfill and coming into contact with the waste, thereby minimizing leachate generation. The U.S. EPA construction guidelines for soil hydraulic barriers specify that the soil moisture content and compactive effort may be increased to ensure that the barrier achieves a specified permeability of 1 x 10{sup {minus}7} cm/sec. However, constructing a soil barrier with high moisture content makes the soil more difficult to work and increases the required compactive effort to achieve the specified density, ultimately increasing the construction cost of the barrier. Alternative landfill cover designs rely on soil physical properties, hydraulic characteristics, and vegetation requirements to lower the flux rate of water through the cover. They can achieve greater reliability than the prescriptive RCRA Subtitle C design, especially under arid or semi-arid environmental conditions. With an alternative cover design, compacted soil barriers can be constructed with a soil moisture content that makes placement and compaction of the soil easier and less expensive. Under these conditions, the soil barrier has more capacity to absorb and control moisture within it, thereby enhancing the reliability of the barrier. This document contains information on the above-mentioned technology, including description, applicability, cost, and performance, data.

  1. Apply: Building Energy Efficiency Frontiers and Innovation Technologies (BENEFIT)- 2015 Funding Opportunity Announcement

    Broader source: Energy.gov [DOE]

    Closed Application Deadline: January 12, 2015 This Building Energy Efficiency Frontiers and Innovations Technologies (BENEFIT) 2015 FOA contributes to advancement in two core technological areas: non-vapor compression HVAC technologies and advanced vapor compression HVAC technologies.

  2. Technology Innovation (Hardware, Software, and What You Can Learn from Startup

    E-Print Network [OSTI]

    Jacob, Bruce

    Technology Innovation (Hardware, Software, and What You Can Learn from Startup Companies) Bruce Principles 1 #12;ABSTRACT Innovation is highly sought after: it is extremely valuable, extremely rare, and extremely difficult to do. An executive desiring an innovative company should first realize that innovation

  3. ISTANBUL TECHNICAL UNIVERSITY INSTITUTE OF SCIENCE AND TECHNOLOGY NEW USER-CENTERED METHODS FOR DESIGN INNOVATION

    E-Print Network [OSTI]

    Mutlu, Bilge

    ISTANBUL TECHNICAL UNIVERSITY INSTITUTE OF SCIENCE AND TECHNOLOGY NEW USER-CENTERED METHODS FOR DESIGN INNOVATION: A STUDY ON THE ROLE OF EMERGING METHODS IN INNOVATIVE PRODUCT DESIGN AND DEVELOPMENT M of the 'Innovation' Concept 16 3.2. The Theory of Innovation: A Historical and Theoretical Overview 17 3

  4. Innovation

    Broader source: Energy.gov (indexed) [DOE]

    At Our Disposal Open Innovation Data Liquidity FBI SCARS & TATTOOS APP Innovation Ecosystem Building Capacity A Final Word Well, three actually . . . . Open Innovation Creating...

  5. Validation of Innovative Exploration Technologies for Newberry Volcano: Map showing location of wells permitted, drilled and seismic test 2012

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Jaffe, Todd

    Innovative Exploration Technologies for Newberry Volcano: Map showing location of wells permitted, drilled & seismic test, 2012

  6. Validation of Innovative Exploration Technologies for Newberry Volcano: Map showing location of wells permitted, drilled and seismic test 2012

    SciTech Connect (OSTI)

    Jaffe, Todd

    2012-01-01T23:59:59.000Z

    Innovative Exploration Technologies for Newberry Volcano: Map showing location of wells permitted, drilled & seismic test, 2012

  7. The political economy of technological innovation : a change in the debate

    E-Print Network [OSTI]

    Taylor, Mark Zachary

    2006-01-01T23:59:59.000Z

    Why are some countries more technologically innovative than others? The dominant explanation amongst political-economists is that domestic institutions determine national innovation rates. However, after decades of research, ...

  8. Innovative applications of technology for nuclear power plant productivity improvements

    SciTech Connect (OSTI)

    Naser, J. A. [Electric Power Research Inst., 3420 Hillview Avenue, Palo Alto, CA 94303 (United States)

    2012-07-01T23:59:59.000Z

    The nuclear power industry in several countries is concerned about the ability to maintain high plant performance levels due to aging and obsolescence, knowledge drain, fewer plant staff, and new requirements and commitments. Current plant operations are labor-intensive due to the vast number of operational and support activities required by commonly used technology in most plants. These concerns increase as plants extend their operating life. In addition, there is the goal to further improve performance while reducing human errors and increasingly focus on reducing operations and maintenance costs. New plants are expected to perform more productively than current plants. In order to achieve and increase high productivity, it is necessary to look at innovative applications of modern technologies and new concepts of operation. The Electric Power Research Inst. is exploring and demonstrating modern technologies that enable cost-effectively maintaining current performance levels and shifts to even higher performance levels, as well as provide tools for high performance in new plants. Several modern technologies being explored can provide multiple benefits for a wide range of applications. Examples of these technologies include simulation, visualization, automation, human cognitive engineering, and information and communications technologies. Some applications using modern technologies are described. (authors)

  9. ALARA{trademark} 1146 strippable coating. Innovative Technology Summary Report

    SciTech Connect (OSTI)

    None

    2000-04-01T23:59:59.000Z

    The application of strippable coatings is an innovative technology for decontamination, which effectively reduces hazard residuals at low cost. The process applies a plastic membrane or polymer on the contaminated surface. The strippable coating is allowed to cure for up to 24 hours, after which it can be easily peeled or stripped off the surface. The coating traps the contaminants in the polymer matrix. Strippable coatings are non-toxic and do not contain volatile compounds or heavy metals. Since the coating constitutes a solid waste, disposal is easier than treating contaminated liquid wastes.

  10. Validation of Innovative Exploration Technologies | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your DensityEnergy U.S.-China Electric Vehicle and03/02 TUEValidation of Innovative Exploration Technologies

  11. Portable x-ray fluorescence spectrometer. Innovative technology summary report

    SciTech Connect (OSTI)

    NONE

    1998-12-01T23:59:59.000Z

    This report describes the application of portable X-ray fluorescence (XRF) spectrometry to characterize materials related to deactivation and decommissioning (D and D) of contaminated facilities. Two portable XRF instruments manufactured by TN Spectrace were used in a technology evaluation as part of the Large-Scale Demonstration Project (LSDP) held at the Chicago Pile-5 Research Reactor (CP-5) located at Argonne National Laboratory (ANL). The LSDP is sponsored by the US Department of Energy (DOE), Office of Science and Technology, Deactivation and Decommissioning Focus Are (DDFA). The objective of the LSDP is to demonstrate innovative technologies or technology applications potentially beneficial to the D and D of contaminated facilities. The portable XRF technology offers several potential benefits for rapid characterization of facility components and contaminants, including significant cost reduction, fast turnaround time,a nd virtually no secondary waste. Field work for the demonstration of the portable XRF technology was performed from August 28--September 3, 1996 and October 30--December 13, 1996.

  12. Pilot projects for cooperation between European Institutes of Technology Supporting integrated innovation networks Call for proposals

    E-Print Network [OSTI]

    De Cindio, Fiorella

    with their own legal form, or in the European Institute of Technology, where research, education and innovation partnerships between the actors involved in technological 1 "Creating an innovative Europe", ReportPilot projects for cooperation between European Institutes of Technology Supporting integrated

  13. How to Qualify for NIH Small Business Innovation and Technology Transfer Grants

    E-Print Network [OSTI]

    Berdichevsky, Victor

    How to Qualify for NIH Small Business Innovation and Technology Transfer Grants Professional Auditorium BBCetc is an Ann Arbor-based company that provides Small Business Innovation Research (SBIR) and Small Business Technology Transfer (STTR) proposal development services to technology based

  14. Economics of Innovation and New Technology Vol. 22, No. 1, January 2013, 4772

    E-Print Network [OSTI]

    Balland, Pierre-Alexandre

    Economics of Innovation and New Technology Vol. 22, No. 1, January 2013, 47­72 Structural: O32; R12 1. Introduction Technological innovations emerge according to micro­macro dynamics in which and geographical patterns of knowledge networks in emerging technological standards: evidence from the European

  15. Webinar: America's Next Top Energy Innovator Runner-Up Presents Hydrogen Detection Technologies

    Broader source: Energy.gov [DOE]

    Video recording and text version of the webinar, "America's Next Top Energy Innovator Runner-Up Presents Hydrogen Detection Technologies," originally presented on April 3, 2012.

  16. SunShot Initiative Researcher Wins National Medal of Technology and Innovation

    Broader source: Energy.gov [DOE]

    Last week, President Obama recognized Dr. Rakesh Agrawal, who is currently a researcher with the Department's SunShot Initiative, with the National Medal of Technology and Innovation.

  17. Modeling TechnologyModeling Technology Innovation:Innovation: Uncertainties inUncertainties in

    E-Print Network [OSTI]

    control systems used at coal-fired power plants · No "natural" markets for these technologies; major-cost CCS systems for power plants #12;3 Results fromResults from prior case studiesprior case studies E Applied to New Power SystemsApplied to New Power Systems 20000 10000 5000 1000 100 10 100 1000 10000

  18. 2-D linear motion system. Innovative technology summary report

    SciTech Connect (OSTI)

    NONE

    1998-11-01T23:59:59.000Z

    The US Department of Energy's (DOE's) nuclear facility decontamination and decommissioning (D and D) program requires buildings to be decontaminated, decommissioned, and surveyed for radiological contamination in an expeditious and cost-effective manner. Simultaneously, the health and safety of personnel involved in the D and D activities is of primary concern. D and D workers must perform duties high off the ground, requiring the use of manlifts or scaffolding, often, in radiologically or chemically contaminated areas or in areas with limited access. Survey and decontamination instruments that are used are sometimes heavy or awkward to use, particularly when the worker is operating from a manlift or scaffolding. Finding alternative methods of performing such work on manlifts or scaffolding is important. The 2-D Linear Motion System (2-D LMS), also known as the Wall Walker{trademark}, is designed to remotely position tools and instruments on walls for use in such activities as radiation surveys, decontamination, and painting. Traditional (baseline) methods for operating equipment for these tasks require workers to perform duties on elevated platforms, sometimes several meters above the ground surface and near potential sources of contamination. The Wall Walker 2-D LMS significantly improves health and safety conditions by facilitating remote operation of equipment. The Wall Walker 2-D LMS performed well in a demonstration of its precision, accuracy, maneuverability, payload capacity, and ease of use. Thus, this innovative technology is demonstrated to be a viable alternative to standard methods of performing work on large, high walls, especially those that have potential contamination concerns. The Wall Walker was used to perform a final release radiological survey on over 167 m{sup 2} of walls. In this application, surveying using a traditional (baseline) method that employs an aerial lift for manual access was 64% of the total cost of the improved technology. However, for areas over approximately 600 m{sup 2}, the Wall Walker would cost less than the baseline. Using the Wall Walker 2-D LMS, ALARA exposure and worker safety is improved, and there is potential for increased productivity. This innovative technology performed better than the baseline by providing real-time monitoring of the tool or instrument position. Also, the Wall Walker 2-D LMS can traverse any two-dimensional path at constant speeds of up to 18.3 linear meters per minute (60 linear feet per minute). The survey production rate for the innovative technology was about 0.6 m{sup 2}/min (6 ft{sup 2}/min); the baseline production rate was approximately 0.3 m{sup 2}/min (3 ft{sup 2}/min), using the same surveying instrument and maximum scanning rate.

  19. Combining innovative technology demonstrations with dense nonaqueous phase liquids cleanup

    SciTech Connect (OSTI)

    Hagood, M.C.; Koegler, K.J.; Rohay, V.J.; Trent, S.J. [Westinghouse Hanford Co., Richland, WA (United States); Stein, S.L.; Brouns, T.M.; McCabe, G.H.; Tomich, S. [Pacific Northwest Lab., Richland, WA (United States)

    1993-05-01T23:59:59.000Z

    Radioactively contaminated acidic aqueous wastes and organic liquids were discharged to the soil column at three disposal sites within the 200 West Area of the Hanford Site, Washington. As a result, a portion of the underlying groundwater is contaminated with carbon tetrachloride several orders of magnitude above the maximum contaminant level accepted for a drinking water supply. Treatability testing and cleanup actions have been initiated to remove the contamination from both the unsaturated soils to minimize further groundwater contamination and the groundwater itself. To expedite cleanup, innovative technologies for (1) drilling, (2) site characterization, (3) monitoring, (4) well field development, and (5) contaminant treatment are being demonstrated and subsequently used where possible to improve the rates and cost savings associated with the removal of carbon tetrachloride from the soils and groundwater.

  20. INNOVATIVE FOSSIL FUEL FIRED VITRIFICATION TECHNOLOGY FOR SOIL REMEDIATION

    SciTech Connect (OSTI)

    J. Hnat; L.M. Bartone; M. Pineda

    2001-07-13T23:59:59.000Z

    This Summary Report summarizes the progress of Phases 3, 3A and 4 of a waste technology Demonstration Project sponsored under a DOE Environmental Management Research and Development Program and administered by the U.S. Department of Energy National Energy Technology Laboratory-Morgantown (DOE-NETL) for an ''Innovative Fossil Fuel Fired Vitrification Technology for Soil Remediation''. The Summary Reports for Phases 1 and 2 of the Program were previously submitted to DOE. The total scope of Phase 3 was to have included the design, construction and demonstration of Vortec's integrated waste pretreatment and vitrification process for the treatment of low level waste (LLW), TSCA/LLW and mixed low-level waste (MLLW). Due to funding limitations and delays in the project resulting from a law suit filed by an environmental activist and the extended time for DOE to complete an Environmental Assessment for the project, the scope of the project was reduced to completing the design, construction and testing of the front end of the process which consists of the Material Handling and Waste Conditioning (MH/C) Subsystem of the vitrification plant. Activities completed under Phases 3A and 4 addressed completion of the engineering, design and documentation of the Material Handling and Conditioning System such that final procurement of the remaining process assemblies can be completed and construction of a Limited Demonstration Project be initiated in the event DOE elects to proceed with the construction and demonstration testing of the MH/C Subsystem.

  1. The Picatinny Technology Transfer Innovation Center: A business incubator concept adapted to federal laboratory technology transfer

    SciTech Connect (OSTI)

    Wittig, T. [Geo-Centers, Inc. (United States); Greenfield, J. [Armaments Research, Development and Engineering Center, Picatinny Arsenal, NJ (United States)

    1996-10-01T23:59:59.000Z

    In recent years, the US defense industrial base spawned the aerospace industry, among other successes, and served as the nation`s technology seed bed. However, as the defense industrial base shrinks and public and private resources become scarcer, the merging of the commercial and defense communities becomes necessary to maintain national technological competencies. Cooperative efforts such as technology transfer provide an attractive, cost-effective, well-leveraged alternative to independently funded research and development (R and D). The sharing of knowledge, resources, and innovation among defense contractors and other public sector firms, academia, and other organizations has become exceedingly attractive. Recent legislation involving technology transfer provides for the sharing of federal laboratory resources with the private sector. The Army Research, Development and Engineering Center (ARDEC), Picatinny Arsenal, NJ, a designer of weapons systems, is one of the nation`s major laboratories with this requirement. To achieve its important technology transfer mission, ARDEC reviewed its capabilities, resources, intellectual property, and products with commercial potential. The purpose of the review was to develop a viable plan for effecting a technology transfer cultural change within the ARDEC, Picatinny Arsenal and with the private sector. This report highlights the issues identified, discussed, and resolved prior to the transformation of a temporarily vacant federal building on the Picatinny installation into a business incubator. ARDEC`s discussions and rationale for the decisions and actions that led to the implementation of the Picatinny Technology Transfer Innovation Center are discussed.

  2. Removable Urban Pavements: An innovative, sustainable technology Journal: International Journal of Pavement Engineering

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    1 Removable Urban Pavements: An innovative, sustainable technology Journal: International Journal of Pavement Engineering URL: http://mc.manuscriptcentral.com/gpav E-mail: IJPE.editor@citg.tudelft.nl, alqadi@uiuc.edu Removable Urban Pavements: An innovative, sustainable technology François de Larrard1, Thierry Sedran2, Jean

  3. innovati nEnergy Innovation Portal Brings DOE Technologies to the Market

    E-Print Network [OSTI]

    innovati nEnergy Innovation Portal Brings DOE Technologies to the Market For venture capitalists solution used to be like looking for a needle in a haystack. Now, a searchable treasure trove of innovative U.S. Department of Energy (DOE) technologies is available. Created by the National Renewable Energy

  4. Fulfilment of the performance contract between the Ministry of Science, Technology and Innovation

    E-Print Network [OSTI]

    , Technology and Innovation and Risø National Laboratory for the period 2002-2005 Contents Page 1 Introduction ­ bridging the former strategy to `Risø's strategy ­ impact on society' 71 Page 1 of 71 #12;1. Introduction, Technology and Innovation and Risø National Laboratory for the period 2002-2005. The report serves as self

  5. INNOVATIVE FOSSIL FUEL FIRED VITRIFICATION TECHNOLOGY FOR SOIL REMEDIATION

    SciTech Connect (OSTI)

    J. Hnat; L.M. Bartone; M. Pineda

    2001-10-31T23:59:59.000Z

    This Final Report summarizes the progress of Phases 3,3A and 4 of a waste technology Demonstration Project sponsored under a DOE Environmental Management Research and Development Program and administered by the U.S. Department of Energy National Energy Technology Laboratory-Morgantown (DOE-NETL) for an ''Innovative Fossil Fuel Fired Vitrification Technology for Soil Remediation''. The Summary Reports for Phases 1 and 2 of the Program were previously submitted to DOE. The total scope of Phase 3 was to have included the design, construction and demonstration of Vortec's integrated waste pretreatment and vitrification process for the treatment of low level waste (LLW), TSCA/LLW and mixed low-level waste (MLLW). Due to funding limitations and delays in the project resulting from a law suit filed by an environmental activist and the extended time for DOE to complete an Environmental Assessment for the project, the scope of the project was reduced to completing the design, construction and testing of the front end of the process which consists of the Material Handling and Waste Conditioning (MH/C) Subsystem of the vitrification plant. Activities completed under Phases 3A and 4 addressed completion of the engineering, design and documentation of the MH/C System such that final procurement of the remaining process assemblies can be completed and construction of a Limited Demonstration Project be initiated in the event DOE elects to proceed with the construction and demonstration testing of the MH/C Subsystem. Because of USEPA policies and regulations that do not require treatment of low level or low-level/PCB contaminated wastes, DOE terminated the project because there is no purported need for this technology.

  6. Gamma-ray imaging system. Innovative technology summary report

    SciTech Connect (OSTI)

    NONE

    1998-11-01T23:59:59.000Z

    The RadScan 600 gamma-ray imaging system is designed to survey large surface areas for radiological contamination with accuracy and efficiency. The resulting survey data are clear, concise, and precise in describing how much contamination is present at exact locations. Data can be permanently stored electronically and on video tape, making storage and retrieval economical and efficient. This technology can perform accurate measurements in high radiation contamination areas while minimizing worker exposure. The RadScan 600 system is a safe and effective alternative to hand-held radiation detection devices. Performance data of the demonstrated survey area of the RadScan 600 system versus the baseline, which is the hand-held radiation detection devices (RO-2 and RO-7) for a given survey, production rate is 72% of the baseline. It should be noted that the innovative technology provides 100% coverage at a unit cost of $8.64/m{sup 2} versus a static measurement of a unit cost of $1.61/m{sup 2} for the baseline.

  7. Validation of Innovative Exploration Technologies for Newberry Volcano: Raw data used to prepare the Gravity Report by Zonge 2012

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Jaffe, Todd

    Validation of Innovative Exploration Technologies for Newberry Volcano: Raw data used to prepare the Gravity Report by Zonge 2012

  8. Validation of Innovative Exploration Technologies for Newberry Volcano: Seismic data - raw taken by Apex Hipoint for 1st test 2012

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Jaffe, Todd

    Validation of Innovative Exploration Technologies for Newberry Volcano: Seismic data - raw taken by Apex Hipoint for 1st test 2012

  9. Validation of Innovative Exploration Technologies for Newberry Volcano: Seismic data - raw taken by Apex Hipoint for 1st test 2012

    SciTech Connect (OSTI)

    Jaffe, Todd

    2012-01-01T23:59:59.000Z

    Validation of Innovative Exploration Technologies for Newberry Volcano: Seismic data - raw taken by Apex Hipoint for 1st test 2012

  10. Innovative technology summary report: in situ air stripping using horizontal wells

    SciTech Connect (OSTI)

    NONE

    1995-04-01T23:59:59.000Z

    In situ air stripping (ISAS) technology was developed to remediate soils and ground water contaminated with volatile organic compounds (VOCs) both above and below the water table. ISAS employs horizontal wells to inject (sparge) air into the ground water and vacuum extract VOCs from vadose zone soils. The innovation is creation of a system that combines two somewhat innovative technologies, air sparging and horizontal wells, with a baseline technology, soil vapor extraction, to produce a more efficient in situ remediation system.

  11. IAC-09-D3.4.7 TECHNOLOGY DEVELOPMENT IN THE NASA INNOVATION SYSTEM: CHALLENGES AND OPPORTUNITIES

    E-Print Network [OSTI]

    de Weck, Olivier L.

    IAC-09-D3.4.7 TECHNOLOGY DEVELOPMENT IN THE NASA INNOVATION SYSTEM: CHALLENGES AND OPPORTUNITIES Business Innovation Research (SBIR) and Small Business Technology Transfer (STTR) programs are mandated" technologies, their record of infusion into the overall NASA innovation system is more ambiguous. The SBIR

  12. New book on `Technological Innovation, Food Sovereignty and Food Security in More than 80 persons participated in the presentation

    E-Print Network [OSTI]

    Richner, Heinz

    New book on `Technological Innovation, Food Sovereignty and Food Security in Bolivia' More than 80 Alimentaría' (Technological Innovation, Food Sovereignty and Food Security). The book was written by Freddy conceptual and institutional approaches to the development of agrarian and technological innovations

  13. African Journal of Science, Technology, Innovation and Development (AJSTID), Vol. 2, No. 3, 2010, pp. 186-206

    E-Print Network [OSTI]

    1 African Journal of Science, Technology, Innovation and Development (AJSTID), Vol. 2, No. 3, 2010 manuscript, published in "African Journal of Science, Technology, Innovation and Development (AJSTID) 2, 3 conference1 give the same impression as well: the terms "science", "technology" and "innovation

  14. Russian Pulsating Mixer Pump. Innovative Technology Summary Report

    SciTech Connect (OSTI)

    None

    2002-03-01T23:59:59.000Z

    This sludge mixing/mobilization system was developed in Russia. A prototype system was evaluated by the Tanks Focus Area (TFA) and Industry and University Programs (INDP). The Russian Pulsating Mixer Pump showed promise for mixing highly viscous sludges. This project is to refine the system design (especially the control subsystem) and manufacture the system in Russia in accordance with quality standards required for deployment in radioactive waste storage tanks. Specifications and requirements are being developed by the TFA and INDP. The requirements may call for two or three of the sludge mixing systems to be delivered to Oak Ridge. DOE-Oak Ridge and the Oak Ridge National Laboratory will deploy the pulsating mixing pump system in their Gunite Tanks. These tanks are being emptied and cleaned prior to closure. Oak Ridge has deployed a number of innovative technologies in these efforts. If successful at Oak Ridge, the pulsating mixing pump system has potential application at several other DOE sites, including Savannah River, Hanford, and Idaho.

  15. Emissions Technology Gives Company Clean Win as Energy Innovator...

    Broader source: Energy.gov (indexed) [DOE]

    Office of Public Affairs How does this innovation work? A plasma reformer attached to the engine extracts hydrogen from the fuel. The device injects the hydrogen into the...

  16. 1366 Technologies Shines a Light on American Innovation | Department...

    Broader source: Energy.gov (indexed) [DOE]

    in North Lexington, Massachusetts to get an inside look at their innovative approach to solar manufacturing and document how a 4 million grant from the Advanced Research...

  17. Expected Technological Innovation to Drive Global Market for...

    Open Energy Info (EERE)

    Innovation to Drive Global Market for Microturbine Systems Home > Groups > Increase Natural Gas Energy Efficiency John55364's picture Submitted by John55364(95) Contributor...

  18. Innovative Bioenergy Process Recognized for Excellence in Technology...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Award for developing an innovative process that uses heat and pressure to convert whole algae into biocrude oil in just minutes-much faster than existing processes. Using...

  19. Science, technology and innovation in a 21st century John H. Marburger III

    E-Print Network [OSTI]

    Colorado at Boulder, University of

    the marketplace. The innovators who built the World Wide Web on the foundation of the Internet were particle of markets and an essential dimension of innovation. And as the example of the World Wide Web shows, need for this special issue. It is published posthumously. Linking the words ``science,'' ``technology

  20. Live Webinar on the Funding Opportunity for Technology Incubator for Wind Energy Innovations

    Broader source: Energy.gov [DOE]

    On April 17, 2014, from 1:00 – 3:00 PM MDT, the Wind Program will hold a live webinar to provide information to potential applicants for the Technology Incubator for Wind Energy Innovations Funding Opportunity.

  1. DOE Awards Seven Small Business Innovation Research Grants for Solid-State Lighting Technology

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy (DOE) has awarded seven Small Business Innovation Research (SBIR) grants targeting advances in solid-state lighting (SSL) technology. The SBIR program seeks to...

  2. DOE Awards Two Small Business Innovation Research Phase II Grants for Solid-State Lighting Technology

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy (DOE) has awarded two Small Business Innovation Research (SBIR) grants targeting advances in solid-state lighting (SSL) technology. The SBIR program seeks to increase...

  3. Valuing innovative technology R&D as a real option : application to fuel cell vehicles

    E-Print Network [OSTI]

    Tsui, Maggie

    2005-01-01T23:59:59.000Z

    This thesis aims to elucidate real option thinking and real option valuation techniques for innovative technology investment. Treating the fuel cell R&D investment as a real option for General Motor's light passenger vehicle ...

  4. Science. Technology. Innovation. W I N T E R 2 0 0 4

    E-Print Network [OSTI]

    Science. Technology. Innovation. W I N T E R 2 0 0 4 Inside | Page 15 Spectral library helps's leadersincreasingly turn to science and technology for information to help them make important decisions technology, fundamental science and national security, discuss how each area of research at PNNL addresses

  5. Innovate to Survive: The Effect of Technology Competition on Corporate Bankruptcy

    E-Print Network [OSTI]

    Chaudhuri, Sanjay

    are significantly more costly if driven by patent competition. Keywords: Bankruptcy, Technology, Patents JEL with respect to the risk, costs, and pattern of bankruptcy. Firms operating in highly technological industriesInnovate to Survive: The Effect of Technology Competition on Corporate Bankruptcy Assaf Eisdorfer

  6. GSA's Green Proving Ground: Identifying, Testing and Evaluating Innovative Technologies (Presentation)

    SciTech Connect (OSTI)

    Kandt, A.; Lowell, M.

    2012-05-01T23:59:59.000Z

    GSA's Green Proving Ground (GPG) program utilizes GSA's real estate portfolio to test and evaluate innovative and underutilized sustainable building technologies and practices. Findings are used to support the development of GSA performance specifications and inform decision making within GSA, other federal agencies, and the real estate industry. The program aims to drive innovation in environmental performance in federal buildings and help lead market transformation through deployment of new technologies.

  7. Incentive competitions as a policy tool for technological innovation

    E-Print Network [OSTI]

    Campbell, Georgina A. (Georgina Amy)

    2011-01-01T23:59:59.000Z

    Large incentive competitions are becoming increasingly popular amongst policymakers and philanthropists as a mission-orientated tool for inducing innovation, particularly in areas of national priority where market incentives ...

  8. Emerging Industrial Innovations for New Energy Efficient Technologies 

    E-Print Network [OSTI]

    Laitner, J. A.

    2007-01-01T23:59:59.000Z

    as integrated photovoltaic systems may play an even larger role in the more productive use of our energy resources. This paper explores recent work on industrial innovation, often involving public-private partnerships, and provides a context to understand...

  9. Emerging Industrial Innovations for New Energy Efficient Technologies

    E-Print Network [OSTI]

    Laitner, J. A.

    2007-01-01T23:59:59.000Z

    as integrated photovoltaic systems may play an even larger role in the more productive use of our energy resources. This paper explores recent work on industrial innovation, often involving public-private partnerships, and provides a context to understand...

  10. CT Solar Loan

    Broader source: Energy.gov [DOE]

    The Clean Energy Finance and Investment Authority is offering a pilot loan program, CT Solar Loan, to provide homeowners with 15-year loans for solar PV equipment. The loans are administered...

  11. Evaluation of innovative arsenic treatment technologies :the arsenic water technology partnership vendors forums summary report.

    SciTech Connect (OSTI)

    Everett, Randy L.; Siegel, Malcolm Dean; McConnell, Paul E.; Kirby, Carolyn (Comforce Technical Services, Inc.)

    2006-09-01T23:59:59.000Z

    The lowering of the drinking water standard (MCL) for arsenic from 50 {micro}g/L to 10 {micro}g/L in January 2006 could lead to significant increases in the cost of water for many rural systems throughout the United States. The Arsenic Water Technology Partnership (AWTP), a collaborative effort of Sandia National Laboratories, the Awwa Research Foundation (AwwaRF) and WERC: A Consortium for Environmental Education and Technology Development, was formed to address this problem by developing and testing novel treatment technologies that could potentially reduce the costs of arsenic treatment. As a member of the AWTP, Sandia National Laboratories evaluated cutting-edge commercial products in three annual Arsenic Treatment Technology Vendors Forums held during the annual New Mexico Environmental Health Conferences (NMEHC) in 2003, 2004 and 2005. The Forums were comprised of two parts. At the first session, open to all conference attendees, commercial developers of innovative treatment technologies gave 15-minute talks that described project histories demonstrating the effectiveness of their products. During the second part, these same technologies were evaluated and ranked in closed sessions by independent technical experts for possible use in pilot-scale field demonstrations being conducted by Sandia National Laboratories. The results of the evaluations including numerical rankings of the products, links to company websites and copies of presentations made by the representatives of the companies are posted on the project website at http://www.sandia.gov/water/arsenic.htm. This report summarizes the contents of the website by providing brief descriptions of the technologies represented at the Forums and the results of the evaluations.

  12. Designation Order No. 00-12.00 to the Executive Director of Loan Programs and Director of the Advanced Technology Vehicles Manufacturing Incentive Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2010-04-30T23:59:59.000Z

    Secretary or Energy designates each of the Executive Director of Loan Programs and the Director of the Advanced Technology Vehicles Manufacturing Incentive Program, as their designee, as the term is used in the Internal Revenue Manual, Part 11, Chapter 3, Section 29.6, acting separately to request tax delinquency account status and other tax related information from the Internal Revenue Service, pursuant to 26 U .S.C. 6103(1)(3), for applicants to the Department's Advanced Technology Vehicles Manufacturing Incentive Program under Section 136 of the Energy Independence and Security Act of2007 (P. L. 110-140), as amended.

  13. Innovative technologies for dredging contaminated sediments. Final report

    SciTech Connect (OSTI)

    Zappi, P.A.; Hayes, D.F.

    1991-09-01T23:59:59.000Z

    Contaminated marine sediments exist in many US waterways. Dredging is often a convenient and economical method of safely removing these sediments. However, significant concern exists over the potential environmental effects resulting from the localized sediment resuspension and contaminant release that may occur during the removal operation. This report synopsizes hydraulic equipment, pneumatic equipment, and mechanical components used for dredging and innovative modifications to their dredgeheads. It also examines previously tested dredging equipment designed to remove fine-grained sediments with a minimum amount of sediment resuspension. Major features of equipment innovations, along with available field testing information, are discussed. From these findings, the most promising innovations and research needs are identified. Since this report focuses on the dredging operations, only dredge sizes and sediment resuspension quantities are reported.

  14. AMERICAN INNOVATION:MANUFACTURING LOW CARBON TECHNOLOGIES IN THE MIDWEST EXECUTIVE SUMMARY

    E-Print Network [OSTI]

    Hoffman, Andrew J.

    the manufacture of hundreds of additional low-carbon technologies not examined in this report, and opportunitiesAMERICAN INNOVATION:MANUFACTURING LOW CARBON TECHNOLOGIES IN THE MIDWEST EXECUTIVE SUMMARY JANUARY substantial energy efficiency savings, new jobs created outside of the manufacturing sector, benefits from

  15. Industrial clusters and regional innovation based on hydrogen and fuel cell technologies

    E-Print Network [OSTI]

    Industrial clusters and regional innovation based on hydrogen and fuel cell technologies-Westphalia (Germany): Fuel Cell and Hydrogen Network in North Rhine-Westphalia Regional authorities develops fully or regions in Europe with a potential to develop clusters based on hydrogen and fuel cell technologies? 3

  16. Energy Innovations: Science & Technology at NREL, Spring 2009 (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2009-04-01T23:59:59.000Z

    This new Energy Innovations newsletter will increase the awareness of successes, progress, and activities at NREL. Audiences include VIP visitors to NREL, current and potential partners in our work, and key decision makers who want to know why NREL's R&D is worth funding.

  17. Solyndra Loan Guarantee Announcement

    SciTech Connect (OSTI)

    Vice President Biden and Secretary Chu were joined by California Governor Arnold Schwarzenegger and Solyndra CEO Dr. Chris Grone

    2009-09-09T23:59:59.000Z

    Vice President Biden and Secretary Chu were joined by California Governor Arnold Schwarzenegger and Solyndra CEO Dr. Chris Grone to announce that the Department of Energy has finalized a $535 million loan guarantee for Solyndra, Inc., which manufactures innovative cylindrical solar photovoltaic panels that provide clean, renewable energy. The funding will finance construction of the first phase of the company's new manufacturing facility. Solyndra estimates the new plant will initially create 3,000 construction jobs, and lead to as many as 1,000 jobs once the facility opens.

  18. Solyndra Loan Guarantee Announcement

    ScienceCinema (OSTI)

    Vice President Biden and Secretary Chu were joined by California Governor Arnold Schwarzenegger and Solyndra CEO Dr. Chris Grone

    2010-09-01T23:59:59.000Z

    Vice President Biden and Secretary Chu were joined by California Governor Arnold Schwarzenegger and Solyndra CEO Dr. Chris Grone to announce that the Department of Energy has finalized a $535 million loan guarantee for Solyndra, Inc., which manufactures innovative cylindrical solar photovoltaic panels that provide clean, renewable energy. The funding will finance construction of the first phase of the company's new manufacturing facility. Solyndra estimates the new plant will initially create 3,000 construction jobs, and lead to as many as 1,000 jobs once the facility opens.

  19. Interlibrary Loan

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated Codes | National NuclearInterlibrary Loan Interlibrary Loan The Research

  20. Energy Innovation Portal Brings DOE Technologies to the Market (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01T23:59:59.000Z

    For venture capitalists, energy entrepreneurs, and industry veterans, finding the right renewable energy or energy efficiency solution used to be like looking for a needle in a haystack. Now, a searchable treasure trove of innovative U.S. Department of Energy (DOE) technologies is available. Created by the National Renewable Energy Laboratory (NREL), the online Energy Innovation Portal helps businesses and entrepreneurs access the intellectual property of DOE's 17 national laboratories and other research partners.

  1. A boom in energy technology innovation despite decades of stagnant investment

    SciTech Connect (OSTI)

    Bettencourt, Luis M [Los Alamos National Laboratory; Trancik, Jessika A [SANTA FE INSTITUTE; Kaur, Jasleen [INDIANA UNIV

    2009-01-01T23:59:59.000Z

    Rates of patenting in energy technologies in the United States stagnated during a period of low federal investment in the sector from the mid-1980's through 2000. To analyze the current state of the field, we built a new comprehensive database of energy patents in the USA and worldwide aggregated by nation and technology. We show that innovation in energy technologies, as measured by numbers of new patents, has grown dramatically over the last decade both for renewable and fossil fuel-based technologies, but that traditional investment -government and private support for research and development (R&D) -has not risen commensurately. We also show that while venture capital investment in the sector has increased significantly in the last few years it lags the observed uptick in patenting. We find increasing patenting rates in nations worldwide but also differences in regional priorities, as well as a marked divergence in innovation rates across technologies. Renewable energy technologies - especially solar and wind - currently show the fastest rates of innovation, while patenting levels in nuclear fission have remained low despite relatively high levels of sustained investment. While this sharp increase of innovative activity bodes well for change in the energy sector, the future of emerging technologies may hinge on sustained investment in R&D and favorable incentives for market entry.

  2. Innovations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC) EnvironmentalGyroSolé(tm)HydrogenRFPTri-PartyFor manyInhibitingInnovateInnovations

  3. Innovative

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC) EnvironmentalGyroSolé(tm)HydrogenRFPTri-PartyFor manyInhibitingInnovateInnovations

  4. Vehicle Technologies Office Merit Review 2015: Innovative Manufacturing and Materials for Low-Cost Lithium-Ion Batteries

    Broader source: Energy.gov [DOE]

    Presentation given by Optodot Corporation at 2015 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about innovative manufacturing...

  5. Vehicle Technologies Office Merit Review 2014: Innovative Manufacturing and Materials for Low-Cost Lithium-Ion Batteries

    Broader source: Energy.gov [DOE]

    Presentation given by Optodot Corporation at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about innovative manufacturing...

  6. Innovative Drivetrains in Electric Automotive Technology Education (IDEATE)

    Broader source: Energy.gov [DOE]

    2013 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting

  7. CERNA WORKING PAPER SERIES Innovation and international technology transfer

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    for producing solar PV, without deploying PV systems in its territory. This case suggests that technology of international patent data at a detailed technology level with field interviews of ten Chinese PV companies. We show that Chinese producers have acquired the technologies and skills necessary to produce PV products

  8. TRI-CITIES, WASHINGTON INNOVATION AND TECHNOLOGY INDEX

    E-Print Network [OSTI]

    of growth such as traffic congestion and high cost of living o Has two factors impeding its technology Government Services and Functions 12 Tax Burden 13 Labor Costs 14 Growth 15 Employment in Technology Firms 16. Nurturing technology firms is thought to be a more cost-effective way of reaching development goals

  9. Energy Innovations: Science & Technology at NREL, Winter 2011 (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2010-12-01T23:59:59.000Z

    The Energy Innovations newsletter serves as a key outreach tool for NREL to tout the lab's accomplishments, progress, and activities to key stakeholders who can impact the lab's level of funding and potential resources. Audiences include VIP visitors to NREL, current and potential partners in our work, and key decision makers who want to know about NREL's R&D directions and the quality and significance of our results.

  10. Energy Innovations: Science & Technology at NREL, Winter 2010 (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2010-02-01T23:59:59.000Z

    The Energy Innovations newsletter serves as a key outreach tool for NREL to tout the lab's accomplishments, progress, and activities to key stakeholders who can impact the lab's level of funding and potential resources. Audiences include VIP visitors to NREL, current and potential partners in our work, and key decision makers who want to know about NREL's R&D directions and the quality and significance of our results.

  11. Energy Innovations: Science & Technology at NREL, Fall 2009

    SciTech Connect (OSTI)

    Not Available

    2009-09-01T23:59:59.000Z

    The Energy Innovations newsletter serves as a key outreach tool for NREL to tout the lab's accomplishments, progress, and activities to key stakeholders who can impact the lab's level of funding and potential resources. Audiences include VIP visitors to NREL, current and potential partners in our work, and key decision makers who want to know about NREL's R&D directions and the quality and significance of our results.

  12. Energy Innovations: Science & Technology at NREL, Summer 2010 (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2010-07-01T23:59:59.000Z

    The Energy Innovations newsletter serves as a key outreach tool for NREL to tout the lab's accomplishments, progress, and activities to key stakeholders who can impact the lab's level of funding and potential resources. Audiences include VIP visitors to NREL, current and potential partners in our work, and key decision makers who want to know about NREL's R&D directions and the quality and significance of our results.

  13. Innovative Exploration Technologies Maui Hawaii & Glass Buttes, Oregon

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport(Fact Sheet),EnergyImprovementINDIANManagement1,Innovative Exploration

  14. URL To Story: http://press.arrivenet.com/technology/article.php/993701.html RFID Innovation in Healthcare

    E-Print Network [OSTI]

    Chiao, Jung-Chih

    URL To Story: http://press.arrivenet.com/technology/article.php/993701.html RFID Innovation in Healthcare RFID Tribe's Dallas, Texas Chapter Meets to Discuss RFID Innovation in Healthcare Distribution, 2007) -- RFID Innovation in Healthcare is the theme for RFID Tribe's Dallas, Texas chapter meeting

  15. Tri-Cities Index of Innovation and Technology

    SciTech Connect (OSTI)

    Fowler, Richard A.; Scott, Michael J.; Butner, Ryan S.

    2011-01-17T23:59:59.000Z

    In 2001 and 2004, the Economic Development Office of Pacific Northwest National Laboratory published companion reports to the Washington Technology Center Index studies that provided additional information on the Tri-Cities (Kennewick-Richland-Pasco) area of the state, its technology businesses, and important advantages that the Tri-Cities have as places to live and do business. These reports also compared the Tri-Cities area to other technology-based metropolitan areas in the Pacific Northwest and nation along critical dimensions known to be important to technology firms. This report updates the material in these earlier reports, and highlights a growing Tri-Cities metropolitan area.

  16. El Paso County Geothermal Project: Innovative Research Technologies...

    Broader source: Energy.gov (indexed) [DOE]

    (EGI) - Demonstrate a low-impact rig technology with potential to reduce the cost of drilling temperature gradient wells (Aerospect) - Identify best locale within designated area...

  17. Advanced Technologies and Practices - Building America Top Innovations...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    in specific technologies and construction practices that improve the building envelope; heating, ventilation, and air conditioning (HVAC); water heating components; and indoor...

  18. Technology Incubator for Wind Energy Innovations Funding Opportunity...

    Office of Environmental Management (EM)

    robust non-invasive wake measurement technologies that can be deployed in wind farms, are environmentally safe, and are capable of measuring wake velocities, meandering,...

  19. China Brazil Center on Climate Change and Energy Technology Innovation |

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual Siteof EnergyInnovation inOpenadd: ChinaInformationChestnutCountries2050Open Energy

  20. Technology Innovation & Solutions | OpenEI Community

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty Edit with formSoutheastern ILSunseekerTallahatchie ValleyInnovation & Solutions

  1. Innovative Drivetrains in Electric Automotive Technology Education (IDEATE)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport(Fact Sheet),EnergyImprovementINDIANManagement1, 2010|InnovativeEnergyin||

  2. Beijing Beiyi Innovation Vacuum Technology Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual Siteof EnergyInnovation in Carbon CaptureAtriaPowerBean CommercialBeijing Beineng

  3. CHEVROLET | ELECTRIC | GREEN | SPARK EV | TECHNOLOGY. INNOVATION &

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual Siteof EnergyInnovation inOpen Energy Information BurkinaButylCERTEL Jump to:CESCEZ

  4. Innovation

    Broader source: Energy.gov [DOE]

    In 1945, Vannevar Bush began the innovation conversation by writing Science: The Endless Frontier. In that report Bush said that "New products and new processes do not appear full-grown [they]…are painstakingly developed by research in the purest realms of science." With those words The Endless Frontier launched a national conversation linking science to the nation's manufacturing industry and thence to our country's economic prosperity and national security.

  5. Innovation and Threshold Effects in Technology Responses to

    E-Print Network [OSTI]

    Watson, Andrew

    of Non-Carbon Technologies Relative to Fossil Fuels 36 VIII. Conclusions and Next Steps 40 is emerging, though their costs are generally high relative to those of fossil fuels. However, costs are also of Abatement 10 IV. A More General Model 12 a) Energy Demand Equation 13 b) Investment in New Technology 15 c

  6. Validation of Innovative Exploration Technologies for Newberry Volcano

    Broader source: Energy.gov [DOE]

    DOE Geothermal Technologies Peer Review - 2010. Project summary: To effectively combine numerous exploration technologies to gather important data. Once information is combined into 3-D models, a target drilling location will be determined. Deep well capable of finding commercial quantities of geothermal resource will be drilled to validate methodology.

  7. innovati nInnovative Evaporative and Thermally Activated Technologies

    E-Print Network [OSTI]

    Unit DEVap Cooling Core Cool, Dry Supply Air Return Air Outdoor Air NREL is a national laboratory moisture from the air using heat, and advanced evaporative technologies to develop a cooling unit that uses in TATs and evaporative technologies, which work well together to cool buildings. They have also created

  8. Issue 05 February 2010 This issue: 1 Bug battling firm Byotrol relocates R&D to STFC Daresbury Laboratory's Innovations Technology Access Centre 2 Keith Masons

    E-Print Network [OSTI]

    Laboratory's Innovations Technology Access Centre 2 Keith Masons opinion on the relocation 3 RSE? 87654321 The Science and Technology Facilities Council's (STFC's) pioneering Innovations Technology Access Innovations Technology Access Centre (I-TAC) following the recent relocation of their principle microbiology R

  9. "Advances and Controversies" Orange County leads the world in innovative eye technology. In this two day symposium, key leading

    E-Print Network [OSTI]

    Cramer, Karina

    "Advances and Controversies" Orange County leads the world in innovative eye technology. In this two day symposium, key leading surgeons will discuss the many new technologies emerging in anterior segment, oculoplastic, and retinal surgery, innovative solutions to prevent and manage complications

  10. Technology Innovation Program Programmatic Plan: FY 2011 FY 2014

    E-Print Network [OSTI]

    Magee, Joseph W.

    , Repair Manufacturing (#2) Manufacturing Processes for Advanced Materials Critical Processes Intelligent) Sustainability Technologies for personalized medicine (#5) Complex networks Manufacturing Advanced sensing Funding Opportunity), and on the TIP website. For additional information on specific societal challenge

  11. DOE-Backed Project Will Demonstrate Innovative Geothermal Technology...

    Energy Savers [EERE]

    June 16, 2010 - 2:27pm Addthis As part of DOE's Geothermal Technologies Program, two geothermal companies, AltaRock Energy and Davenport Newberry, announced plans on June 8 to...

  12. Technological innovation in architecture : effective practices for energy efficient implementation

    E-Print Network [OSTI]

    Intrachooto, Singh

    2002-01-01T23:59:59.000Z

    The objective of this research is to simultaneously address the environmental concerns in building design and the urgency in the architectural, engineering, and construction industry (AEC) to advance technologically by ...

  13. DoD, Energy Security and Technological Innovation

    Broader source: Energy.gov [DOE]

    This presentation summarizes the information given by Dorothy Robyn, deputy under secretary of defense, during the DOE SunShot Grand Challenge: Summit and Technology Forum, June 13, 2012.

  14. Innovation pathways in technology intensive government organizations : insights from NASA

    E-Print Network [OSTI]

    Szajnfarber, Zoe

    2011-01-01T23:59:59.000Z

    Despite a rich legacy of impressive technological accomplishments (e.g., project Apollo, the Hubble Space Telescope) in recent years, the ability of government space agencies to deliver on their promises has increasingly ...

  15. Challenges and Innovative Technologies On Fuel Handling Systems for Future Sodium-Cooled Fast Reactors

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    , AREVA, and EDF have an extensive experience and significant expertise in sodium-cooled fast reactorsChallenges and Innovative Technologies On Fuel Handling Systems for Future Sodium-Cooled Fast Reactors Mathieu CHASSIGNET1;Ã , Sebastien DUMAS1 , Christophe PENIGOT1 , Ge´rard PRELE2 , Alain CAPITAINE2

  16. AMERICAN INNOVATION:MANUFACTURING LOW CARBON TECHNOLOGIES IN THE MIDWEST JANUARY 2010

    E-Print Network [OSTI]

    Hoffman, Andrew J.

    AMERICAN INNOVATION:MANUFACTURING LOW CARBON TECHNOLOGIES IN THE MIDWEST JANUARY 2010 F R E D E R I by The Energy Foundation and the RE-AMP Global Warming Strategic Action Fund. The Climate Group would also like Hannon, Midwest Regional Manager, The Climate Group Acknowledgements We are grateful for the economic

  17. Office of Science and Technology Pol-icy responsible for innovation policy.

    E-Print Network [OSTI]

    Vermont, University of

    FORUM Office of Science and Technology Pol- icy responsible for innovation policy. Restore- vation system. Looking ahead to 2009, as we respond to the financial crisis and expected recession, we (Wilson Center Press, 2005). Better environmental treaties Lawrence Susskind has identified some key

  18. Airborne laser induced fluorescence imaging. Innovative technology summary report

    SciTech Connect (OSTI)

    NONE

    1999-06-01T23:59:59.000Z

    Laser-Induced Fluorescence (LIF) was demonstration as part of the Fernald Environmental Management Project (FEMP) Plant 1 Large Scale Demonstration and Deployment Project (LSDDP) sponsored by the US Department of Energy (DOE) Office of Science and Technology, Deactivation and Decommissioning Focus Area located at the Federal Energy Technology Center (FETC) in Morgantown, West Virginia. The demonstration took place on November 19, 1996. In order to allow the contaminated buildings undergoing deactivation and decommissioning (D and D) to be opened to the atmosphere, radiological surveys of floors, walls and ceilings must take place. After successful completion of the radiological clearance survey, demolition of the building can continue. Currently, this process is performed by collecting and analyzing swipe samples for radiological analysis. Two methods are used to analyze the swipe samples: hand-held frisker and laboratory analysis. For the purpose of this demonstration, the least expensive method, swipe samples analyzed by hand-held frisker, is the baseline technology. The objective of the technology demonstration was to determine if the baseline technology could be replaced using LIF.

  19. Fix-Up Loan

    Broader source: Energy.gov [DOE]

    The Minnesota Housing Finance Agency's (MHFA) Fix-up Loan provides low-interest financing for energy conservation and other basic improvements to residential properties. Home improvement loans...

  20. Sustainable Agriculture Loan Program

    Broader source: Energy.gov [DOE]

    The Minnesota Sustainable Agriculture Loan program will provide loans to Minnesota residents actively engaged in farming for capital expenditures which enhance the environmental and economic...

  1. Innovative Technologies to Manufacture Hybrid Metal Foam/Composite Components

    SciTech Connect (OSTI)

    Carrino, L.; Durante, M.; Franchitti, S. [DIMP, University of Naples 'Federico II', P.le Tecchio, 80-80125 Naples (Italy); Sorrentino, L.; Tersigni, L. [DII, University of Cassino, Via G. Di Biasio, 43-03043 Cassino (Italy)

    2011-01-17T23:59:59.000Z

    The aim of this paper is to verify the technological feasibility to realize hybrid metal-foam/composite component and the mechanical performances of the final structure. The hybrid component is composed by a cylindrical core in aluminum foam, the most used between those commercially available, and an outer layer in epoxy/S2-glass, manufactured by filament winding technology.A set of experimental tests have been carried out, to the aim to estimate the improvement of the hybrid component characteristics, compared to the sum of the single components (metal foam cylinder and epoxy/S2-glass tube).

  2. Qualification of Innovative High Level Waste Pipeline Unplugging Technologies

    SciTech Connect (OSTI)

    McDaniel, D.; Gokaltun, S.; Varona, J.; Awwad, A.; Roelant, D.; Srivastava, R. [Applied Research Center, Florida International University, Miami, FL (United States)

    2008-07-01T23:59:59.000Z

    In the past, some of the pipelines have plugged during high level waste (HLW) transfers resulting in schedule delays and increased costs. Furthermore, pipeline plugging has been cited by the 'best and brightest' technical review as one of the major issues that can result in unplanned outages at the Waste Treatment Plant causing inconsistent operation. As the DOE moves toward a more active high level waste retrieval, the site engineers will be faced with increasing cross-site pipeline waste slurry transfers that will result in increased probability of a pipeline getting plugged. Hence, availability of a pipeline unplugging tool/technology is crucial to ensure smooth operation of the waste transfers and in ensuring tank farm cleanup milestones are met. FIU had earlier tested and evaluated various unplugging technologies through an industry call. Based on mockup testing, two technologies were identified that could withstand the rigors of operation in a radioactive environment and with the ability to handle sharp 90 elbows. We present results of the second phase of detailed testing and evaluation of pipeline unplugging technologies and the objective is to qualify these pipeline unplugging technologies for subsequent deployment at a DOE facility. The current phase of testing and qualification comprises of a heavily instrumented 3-inch diameter (full-scale) pipeline facilitating extensive data acquisition for design optimization and performance evaluation, as it applies to three types of plugs atypical of the DOE HLW waste. Furthermore, the data from testing at three different lengths of pipe in conjunction with the physics of the process will assist in modeling the unplugging phenomenon that will then be used to scale-up process parameters and system variables for longer and site typical pipe lengths, which can extend as much as up to 19,000 ft. Detailed information resulting from the testing will provide the DOE end-user with sufficient data and understanding of the technology, and its limitations to aid in the benefit-cost analysis for management decision whether to deploy the technology or to abandon the pipeline as has been done in the past. In conclusion: The ultimate objective of this study is to qualify NuVision's unplugging technology for use at Hanford. Experimental testing has been conducted using three pipeline lengths and three types of blockages. Erosion rates have been obtained and pressure data is being analyzed. An amplification of the inlet pressure has been observed along the pipeline and is the key to determining up to what pipe lengths the technology can be used without surpassing the site pressure limit. In addition, we will attempt to establish what the expected unplugging rates will be at the longer pipe lengths for each of the three blockages tested. Detailed information resulting from the testing will provide the DOE end-user with sufficient data and understanding of the technology, and its limitations so that management decisions can be made whether the technology has a reasonable chance to successfully unplug a pipeline, such as a cross site transfer line or process transfer pipeline at the Waste Treatment Plant. (authors)

  3. Innovative Energy Efficiency, Renewable Energy, and Grid Technology Update

    Broader source: Energy.gov [DOE]

    This webinar will cover the latest developments in several different energy technologies and how to use them separately or in combination to realize the greatest benefit to tribal communities. The webinar is held from 11:00 a.m. to 12:30 p.m. Mountain Standard Time on April 29, 2015.

  4. Siemens AG, Corporate Technology Innovations in Urban Solutions

    E-Print Network [OSTI]

    Ge, Zigang

    and photovoltaic Building technologies 30% less energy used through building energy management Smart Grid Smart Top Down Challenges of Smart Sustainable Cities Efficiency and transparency is needed · heterogeneity and smart grid solutions · energy scarcity/energy cost · CO2 emissions · energy efficiency/ load management

  5. The Effect of Government Actions on Environmental Technology Innovation: Applications to the Integrated Assessment of Carbon Sequestration Technologies

    SciTech Connect (OSTI)

    Rubin, E. S.; Hounshell, D. A.; Yeh, S.; Taylor, M.; Schrattenholzer, L.; Riahi, K.; Barreto, L.; Rao, S.

    2004-01-15T23:59:59.000Z

    This project seeks to improve the ability of integrated assessment models (IA) to incorporate changes in technology, especially environmental technologies, cost and performance over time. In this report, we present results of research that examines past experience in controlling other major power plant emissions that might serve as a reasonable guide to future rates of technological progress in carbon capture and sequestration (CCS) systems. In particular, we focus on U.S. and worldwide experience with sulfur dioxide (SO{sub 2}) and nitrogen oxide (NO{sub x}) control technologies over the past 30 years, and derive empirical learning rates for these technologies. The patterns of technology innovation are captured by our analysis of patent activities and trends of cost reduction over time. Overall, we found learning rates of 11% for the capital costs of flue gas desulfurization (FGD) system for SO{sub 2} control, and 13% for selective catalytic reduction (SCR) systems for NO{sub x} control. We explore the key factors responsible for the observed trends, especially the development of regulatory policies for SO{sub 2} and NO{sub x} control, and their implications for environmental control technology innovation.

  6. Building Technologies Innovations Program (DE-FOA-0000823) | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative FuelsNovember 13, 2014 Building America Update - NovemberBuilding Technologies

  7. PRaVDA are delighted to announce that it has been selected as the winner in the Institute of Engineering and Technology (IET) Innovation Competition under the

    E-Print Network [OSTI]

    Wagner, Stephan

    of Engineering and Technology (IET) Innovation Competition under the model based engineering category. The Institution of Engineering and Technology's (IET) Innovation Awards recognise excellence across 16 categories Technology Innovation Award in 2012; and have grown to the point where they could float the company

  8. Innovative technology summary report: advanced worker protection system

    SciTech Connect (OSTI)

    NONE

    1996-04-01T23:59:59.000Z

    The Advanced Worker Protection System (AWPS) is a liquid-air-based, self-contained breathing and cooling system with a duration of 2 hrs. AWPS employs a patented system developed by Oceaneering Space Systems (OSS), which was supported by the Department of Energy's (DOE's) Morgantown Energy Technology Center through a cost sharing research and development contract. The heart of the system is the life-support backpack that uses liquid air to provide cooling as well as breathing gas to the worker. The backpack is combined with advanced protective garments, an advanced liquid cooling garment (LCG), a respirator, and communications and support equipment.

  9. Hydrogen and Fuel Cell Technologies - Energy Innovation Portal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC) EnvironmentalGyroSolé(tm)Hydrogen Storage in Carbon Nanotubes ThroughTechnology

  10. Advancing Solar Through Photovoltaic Technology Innovations | Department of

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed off Energy.gov. Are you0 ARRA Newsletters 20103-03Energy Advanced Technology andClean Energy

  11. Ames Laboratory Technologies Available for Licensing - Energy Innovation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItem NotEnergy,ARMForms About BecomeTechnologiesVehicle Parts andat a Glance

  12. Innovative Treatment Technologies for Natural Waters and Wastewaters

    SciTech Connect (OSTI)

    Childress, Amy E.

    2011-07-01T23:59:59.000Z

    The research described in this report focused on the development of novel membrane contactor processes (in particular, forward osmosis (FO), pressure retarded osmosis (PRO), and membrane distillation (MD)) in low energy desalination and wastewater treatment applications and in renewable energy generation. FO and MD are recently gaining national and international attention as viable, economic alternatives for removal of both established and emerging contaminants from natural and process waters; PRO is gaining worldwide attention as a viable source of renewable energy. The interrelationship of energy and water are at the core of this study. Energy and water are inextricably bound; energy usage and production must be considered when evaluating any water treatment process for practical application. Both FO and MD offer the potential for substantial energy and resource savings over conventional treatment processes and PRO offers the potential for renewable energy or energy offsets in desalination. Combination of these novel technologies with each other, with existing technologies (e.g., reverse osmosis (RO)), and with existing renewable energy sources (e.g., salinity gradient solar ponds) may enable much less expensive water production and also potable water production in remote or distributed locations. Two inter-related projects were carried out in this investigation. One focused on membrane bioreactors for wastewater treatment and PRO for renewable energy generation; the other focused on MD driven by a salinity gradient solar pond.

  13. Graphite electrode DC arc furnace. Innovative technology summary report

    SciTech Connect (OSTI)

    NONE

    1999-05-01T23:59:59.000Z

    The Graphite Electrode DC Arc Furnace (DC Arc) is a high-temperature thermal process, which has been adapted from a commercial technology, for the treatment of mixed waste. A DC Arc Furnace heats waste to a temperature such that the waste is converted into a molten form that cools into a stable glassy and/or crystalline waste form. Hazardous organics are destroyed through combustion or pyrolysis during the process and the majority of the hazardous metals and radioactive components are incorporated in the molten phase. The DC Arc Furnace chamber temperature is approximately 593--704 C and melt temperatures are as high as 1,500 C. The DC Arc system has an air pollution control system (APCS) to remove particulate and volatiles from the offgas. The advantage of the DC Arc is that it is a single, high-temperature thermal process that minimizes the need for multiple treatment systems and for extensive sorting/segregating of large volumes of waste. The DC Arc has the potential to treat a wide range of wastes, minimize the need for sorting, reduce the final waste volumes, produce a leach resistant waste form, and destroy organic contaminants. Although the DC arc plasma furnace exhibits great promise for treating the types of mixed waste that are commonly present at many DOE sites, several data and technology deficiencies were identified by the Mixed Waste Focus Area (MWFA) regarding this thermal waste processing technique. The technology deficiencies that have been addressed by the current studies include: establishing the partitioning behavior of radionuclides, surrogates, and hazardous metals among the product streams (metal, slag, and offgas) as a function of operating parameters, including melt temperature, plenum atmosphere, organic loading, chloride concentration, and particle size; demonstrating the efficacy of waste product removal systems for slag and metal phases; determining component durability through test runs of extended duration, evaluating the effect of feed composition variations on process operating conditions and slag product performance; and collecting mass balance and operating data to support equipment and instrument design.

  14. Pipe inspection using the pipe crawler. Innovative technology summary report

    SciTech Connect (OSTI)

    NONE

    1999-05-01T23:59:59.000Z

    The US Department of Energy (DOE) continually seeks safer and more cost-effective remediation technologies for use in the decontamination and decommissioning (D and D) of nuclear facilities. In several of the buildings at the Fernald Site, there is piping that was used to transport process materials. As the demolition of these buildings occur, disposal of this piping has become a costly issue. Currently, all process piping is cut into ten-foot or less sections, the ends of the piping are wrapped and taped to prevent the release of any potential contaminants into the air, and the piping is placed in roll off boxes for eventual repackaging and shipment to the Nevada Test Site (NTS) for disposal. Alternatives that allow for the onsite disposal of process piping are greatly desired due to the potential for dramatic savings in current offsite disposal costs. No means is currently employed to allow for the adequate inspection of the interior of piping, and consequently, process piping has been assumed to be internally contaminated and thus routinely disposed of at NTS. The BTX-II system incorporates a high-resolution micro color camera with lightheads, cabling, a monitor, and a video recorder. The complete probe is capable of inspecting pipes with an internal diameter (ID) as small as 1.4 inches. By using readily interchangeable lightheads, the same system is capable of inspecting piping up to 24 inches in ID. The original development of the BTX system was for inspection of boiler tubes and small diameter pipes for build-up, pitting, and corrosion. However, the system is well suited for inspecting the interior of most types of piping and other small, confined areas. The report describes the technology, its performance, uses, cost, regulatory and policy issues, and lessons learned.

  15. Cesium removal using crystalline silicotitanate. Innovative technology summary report

    SciTech Connect (OSTI)

    NONE

    1999-05-01T23:59:59.000Z

    Approximately 100 million gallons of radioactive waste is stored in underground storage tanks at the Hanford Site, Idaho National Engineering and Environmental Laboratory (INEEL), Oak Ridge Reservation, and Savannah River Site (SRS). Most of the radioactivity comes from {sup 137}Cs, which emits high-activity gamma radiation. The Cesium Removal System is a modular, transportable, ion-exchange system configured as a compact processing unit. Liquid tank waste flows through columns packed with solid material, called a sorbent, that selectively adsorbs cesium and allows the other materials to pass through. The sorbent is crystalline silicotitanate (CST), an engineered material with a high capacity for sorbing cesium from alkaline wastes. The Cesium Removal System was demonstrated at Oak Ridge using Melton Valley Storage Tank (MVST) waste for feed. Demonstration operations began in September 1996 and were completed during June 1997. Prior to the demonstration, a number of ion-exchange materials were evaluated at Oak Ridge with MVST waste. Also, three ion-exchange materials and three waste types were tested at Hanford. These bench-scale tests were conducted in a hot cell. Hanford's results showed that 300 times less sorbent was used by selecting Ionsiv IE-911 over organic ion-exchange resins for cesium removal. This paper gives a description of the technology and discusses its performance, applications, cost, regulatory and policy issues and lessons learned.

  16. Innovative use of DSP technology in space: FORTE event classifier

    SciTech Connect (OSTI)

    Briles, S.; Moore, K. Jones, R.; Klingner, P.; Neagley, D.; Caffrey, M.; Henneke, K.; Spurgen, W. [Los Alamos National Lab., NM (United States); Blain, P. [EG and G Idaho, Inc., Idaho Falls, ID (United States)

    1994-08-01T23:59:59.000Z

    The Fast On-Orbit Recording of Transient Events (FORTE) small satellite will field a digital signal processor (DSP) experiment for the purpose of classifying radio-frequency (rf) transient signals propagating through the earth`s ionosphere. Designated the Event Classifier experiment, this DSP experiment uses a single Texas Instruments` SMJ320C30 DSP to execute preprocessing, feature extraction, and classification algorithms on down-converted, digitized, and buffered rf transient signals in the frequency range of 30 to 300 MHz. A radiation-hardened microcontroller monitors DSP- abnormalities and supervises spacecraft command communications. On- orbit evaluation of multiple algorithms is supported by the Event Classifier architecture. Ground-based commands determine the subset and sequence of algorithms executed to classify a captured time series. Conventional neural network classification algorithms will be some of the classification techniques implemented on-board FORTE while in a low-earth orbit. Results of all experiments, after being stored in DSP flash memory, will be transmitted through the spacecraft to ground stations. The Event Classifier is a versatile and fault-tolerant experiment that is an important new space-based application of DSP technology.

  17. Combined Heat and Power Loan Program

    Broader source: Energy.gov [DOE]

    CHP technologies are eligible for either a grant, loan or power purchase incentive under the initial round of solicitations for new renewable energy generating equipment  up to five megawatts at ...

  18. Secretary Bodman Announces $2 Billion Federal Loan Guarantee...

    Office of Environmental Management (EM)

    well as clean coal technologies and efforts that can convert cellulosic biomass into ethanol." The solicitation, which will be issued soon, will govern the first round of loan...

  19. US Energy Secretary Chu Announces $24 Million Loan for Tenneco...

    Office of Environmental Management (EM)

    loan to design, engineer and produce emission control components for gas, hybrid and diesel-powered vehicle engines. These advanced technology products will help car and light...

  20. Enterprise Innovation Institute Annual Report 2009

    E-Print Network [OSTI]

    Das, Suman

    the application of science, technology, and innovation. Enterprise Innovation Institute (EI2)Enterprise Innovation of all types and sizes use science, technology, and innovation to improve their competitiveness survey of Georgia's health care information technology industry. The Enterprise Innovation Institute

  1. The ARPA-E Innovation Model: A Glimpse into the Future of Automotive Battery Technology

    SciTech Connect (OSTI)

    Gur, Ilan (Program Director and Senior Advisor, ARPA-E) [Program Director and Senior Advisor, ARPA-E

    2014-03-07T23:59:59.000Z

    The Department of Energy's Advanced Research Projects Agency-Energy (ARPA-E) focuses on funding game-changing R&D aimed at reducing U.S. foreign energy dependence and emissions. ARPA-E has made a strong commitment to support breakthrough energy storage technologies that can accelerate the mass adoption of electrified vehicles. This presentation will highlight the range of ARPA-E's efforts in this area, offering a glimpse into the ARPA-E innovation model and the future of automotive battery technology.

  2. The ARPA-E Innovation Model: A Glimpse into the Future of Automotive Battery Technology

    ScienceCinema (OSTI)

    Gur, Ilan (Program Director and Senior Advisor, ARPA-E)

    2014-04-11T23:59:59.000Z

    The Department of Energy's Advanced Research Projects Agency-Energy (ARPA-E) focuses on funding game-changing R&D aimed at reducing U.S. foreign energy dependence and emissions. ARPA-E has made a strong commitment to support breakthrough energy storage technologies that can accelerate the mass adoption of electrified vehicles. This presentation will highlight the range of ARPA-E's efforts in this area, offering a glimpse into the ARPA-E innovation model and the future of automotive battery technology.

  3. Phase I Field Test Results of an Innovative DNAPL Remediation Technology: The Hydrophobic Lance

    SciTech Connect (OSTI)

    Tuck, D.M.

    1999-01-28T23:59:59.000Z

    An innovative technology for recovery of pure phase DNAPL was deployed in the subsurface near the M-Area Settling Basin, continuing the support of the A/M Area Ground Water Corrective Action Program (per Part B requirements). This technology, the Hydrophobic Lance, operates by placing a neutral/hydrophobic surface (Teflon) in contact with the DNAPL. This changes the in situ conditions experienced by the DNAPL, allowing it to selectively drain into a sump from which it can be pumped. Collection of even small amounts of DNAPL can save years of pump-and-treat operation because of the generally low solubility of DNAPL components.

  4. Arid sites stakeholder participation in evaluating innovative technologies: VOC-Arid Site Integrated Demonstration

    SciTech Connect (OSTI)

    Peterson, T.S.; McCabe, G.H.; Brockbank, B.R. [and others

    1995-05-01T23:59:59.000Z

    Developing and deploying innovative environmental cleanup technologies is an important goal for the U.S. Department of Energy (DOE), which faces challenging remediation problems at contaminated sites throughout the United States. Achieving meaningful, constructive stakeholder involvement in cleanup programs, with the aim of ultimate acceptance of remediation decisions, is critical to meeting those challenges. DOE`s Office of Technology Development sponsors research and demonstration of new technologies, including, in the past, the Volatile Organic Compounds Arid Site Integrated Demonstration (VOC-Arid ID), hosted at the Hanford Site in Washington State. The purpose of the VOC-Arid ID has been to develop and demonstrate new technologies for remediating carbon tetrachloride and other VOC contamination in soils and ground water. In October 1994 the VOC-Arid ID became a part of the Contaminant Plume Containment and Remediation Focus Area (Plume Focus Area). The VOC Arid ID`s purpose of involving stakeholders in evaluating innovative technologies will now be carried on in the Plume Focus Area in cooperation with Site Technology Coordination Groups and Site Specific Advisory Boards. DOE`s goal is to demonstrate promising technologies once and deploy those that are successful across the DOE complex. Achieving that goal requires that the technologies be acceptable to the groups and individuals with a stake in DOE facility cleanup. Such stakeholders include groups and individuals with an interest in cleanup, including regulatory agencies, Native American tribes, environmental and civic interest groups, public officials, environmental technology users, and private citizens. This report documents the results of the stakeholder involvement program, which is an integral part of the VOC-Arid ID.

  5. Analysis of Innovative HVAC System Technologies and Their Application for Office Buildings in Hot and Humid Climates 

    E-Print Network [OSTI]

    Tanskyi, Oleksandr

    2012-02-14T23:59:59.000Z

    to evaluate energy reduction potential and the performance of innovative technologies such as dedicated outdoor air system, displacement ventilation, improved cooling system efficiency, air source heat pumps and natural gas heat pumps....

  6. Designing a model for the African Science and Innovation Facility to implement the Science and Technology Consolidated Plan of Action

    E-Print Network [OSTI]

    Designing a model for the African Science and Innovation Facility to implement the Science and Technology Consolidated Plan of Action A study commissioned by NEPAD's Office of Science and Technology been prepared in response to a request from NEPAD's Office of Science and Technology for a review

  7. Acoustic Energy: An Innovative Technology for Stimulating Oil Wells

    SciTech Connect (OSTI)

    Edgar, Dorland E.; Peters, Robert W.; Johnson, Donald O.; Paulsen, P. David; Roberts, Wayne

    2006-04-30T23:59:59.000Z

    The objective of this investigation was to demonstrate the effectiveness of sonication in reducing the viscosity of heavy crude oils. Sonication is the use of acoustic or sound energy to produce physical and/or chemical changes in materials, usually fluids. The goal of the first project phase was to demonstrate a proof of concept for the project objective. Batch tests of three commercially available, single-weight oils (30-, 90-, and 120-wt) were performed in the laboratory. Several observations and conclusions were made from this series of experiments. These include the following: (1) In general, the lower the acoustic frequency, the greater the efficiency in reducing the viscosity of the oils; (2) Sonication treatment of the three oils resulted in reductions in viscosity that ranged from a low of 31% to a high of 75%; and (3) The results of the first phase of the project successfully demonstrated that sonication could reduce the viscosity of oils of differing viscosity. The goal of the second project phase was to demonstrate the ability of sonication to reduce the viscosity of three crude oils ranging from a light crude to a heavy crude. The experiments also were designed to examine the benefits of two proprietary chemical additives used in conjunction with sonication. Acoustic frequencies ranging from 800 Hz to 1.6 kHz were used in these tests, and a reactor chamber was designed for flow-through operation with a capacity of one gallon (3.8 liters). The three crude oils selected for use in the testing program were: (1) a heavy crude from California with a viscosity of approximately 65,000 cP (API gravity about 12{sup o}), (2) a crude from Alabama with a significant water content and a viscosity of approximately 6,000 cP (API gravity about 22 {sup o}), and (3) a light crude from the Middle East with a viscosity of approximately 700 cP (API gravity about 32{sup o}). The principal conclusions derived from the second project phase include the following: (1) The application of acoustic energy (sonication) significantly reduced the viscosity of crude oils, and the amount of viscosity reduction resulting is greater for more viscous, heavy crude oils than it is for less viscous, light crude oils. (2) Test results showed that after being heated, resulting viscosity reductions were not sustained following treatment to the extent that post-sonication reductions were sustained. (3) The maximum viscosity reductions in Oils 1, 2, and 3 due to sonication were 43%, 76%, and 6%, respectively. Samples of Oil 2 associated with larger viscosity reductions often exhibited a definite water separation layer follow the tests, whereas reductions of approximately 23% were measured when this separation was not observed. (4) It was observed that neither horn design nor the reduction of input power by 25% had very little effect on the ability of sonication to alter crude oil viscosity. (5) The chemical additives produced a range of viscosity reduction from 37% to a maximum of 94% with the largest reductions being facilitated by the abundant water present Oil 2. If the Oil 2 results are not considered, the maximum reduction was 73%. The effects of the additives and sonication are enhanced by each other. (6) In only one test did the viscosity return to as much as 50% of the pre-treatment value during a period of 30 days following treatment; recovery was much less in all other cases. Therefore, more than half of the viscosity reduction was maintained for a month without additional treatment. (7) Possible applications, market potential, and economic value of the implementation of a mature sonication technology within the petroleum industry were identified, and it was estimated that the potential exists that more than a billion barrels of oil could be upgraded or produced annually as a result. The project results successfully demonstrated that sonication alone and in combination with chemical additives can effectively reduce the viscosity of crude oils having a broad range of viscosity/API gravity values. Several recommendations are made for follow-on

  8. Direct Loan Program (Connecticut)

    Broader source: Energy.gov [DOE]

    The Connecticut Development Authority’s Direct Loan Program provides direct senior and subordinated loans and mezzanine investments to companies creating or maintaining jobs. Up to $20,000 per job...

  9. GSA's Green Proving Ground: Identifying, Testing and Evaluating Innovative Technologies; Preprint

    SciTech Connect (OSTI)

    Kandt, A.; Lowell, M.

    2012-05-01T23:59:59.000Z

    This paper will provide an overview of the GPG program and its objectives as well as a summary and status update of the 16 technologies selected for enhanced testing and evaluation in 2011. The federal government's General Services Administration's (GSA) Public Buildings Service (PBS) acquires space on behalf of the federal government through new construction and leasing, and acts as a caretaker for federal properties across the country. PBS owns or leases 9,624 assets and maintains an inventory of more than 370.2 million square feet of workspace, and as such has enormous potential for implementing energy efficient and renewable energy technologies to reduce energy and water use and associated emissions. The Green Proving Ground (GPG) program utilizes GSA's real estate portfolio to test and evaluate innovative and underutilized sustainable building technologies and practices. Findings are used to support the development of GSA performance specifications and inform decision making within GSA, other federal agencies, and the real estate industry. The program aims to drive innovation in environmental performance in federal buildings and help lead market transformation through deployment of new technologies. In 2011, the GPG program selected 16 technologies or practices for rigorous testing and evaluation. Evaluations are currently being performed in collaboration with the Department of Energy's National Laboratories, and a steady stream of results will be forthcoming throughout 2012. This paper will provide an overview of the GPG program and its objectives as well as a summary and status update of the 16 technologies selected for enhanced testing and evaluation in 2011. Lastly, it provides a general overview of the 2012 program.

  10. MA HEAT Loan Overview

    Broader source: Energy.gov [DOE]

    Presents information on the success of Massachusetts's HEAT loan offerings and how the financing tool is funded.

  11. Vehicle Technologies Office Merit Review 2015: Innovative Drivetrains in Electric Automotive Technology Education (IDEATE)

    Broader source: Energy.gov [DOE]

    Presentation given by University of Colorado Colorado Springs at 2015 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about...

  12. Revolving Loan Funds and Loan Loss Reserves

    Broader source: Energy.gov [DOE]

    U.S. Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy (EERE) State Energy Program (SEP) guidance to states, Indian tribes, and overseas U.S. territories receiving SEP grants under the 209 Recovery Act dealing with loan loss reserves for revolving loan funds.

  13. Equipment Loans | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power AdministrationField8,Dist. Category UC-l 1, 13 DE@Energy Innovation Equipment ListingLoans

  14. Innovation in Electric Vehicle Technology? Easy as A123 | Department of

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed off Energy.gov.Energy02.pdf7 OPAMEnergy Innovation in Electric Vehicle Technology? Easy as

  15. Demonstration of improved vehicle fuel efficiency through innovative tire design, materials, and weight reduction technologies

    SciTech Connect (OSTI)

    Donley, Tim [Cooper Tire & Rubber Company Incorporated, Findlay, OH (United States)

    2014-12-31T23:59:59.000Z

    Cooper completed an investigation into new tire technology using a novel approach to develop and demonstrate a new class of fuel efficient tires using innovative materials technology and tire design concepts. The objective of this work was to develop a new class of fuel efficient tires, focused on the “replacement market” that would improve overall passenger vehicle fuel efficiency by 3% while lowering the overall tire weight by 20%. A further goal of this project was to accomplish the objectives while maintaining the traction and wear performance of the control tire. This program was designed to build on what has already been accomplished in the tire industry for rolling resistance based on the knowledge and general principles developed over the past decades. Cooper’s CS4 (Figure #1) premium broadline tire was chosen as the control tire for this program. For Cooper to achieve the goals of this project, the development of multiple technologies was necessary. Six technologies were chosen that are not currently being used in the tire industry at any significant level, but that showed excellent prospects in preliminary research. This development was divided into two phases. Phase I investigated six different technologies as individual components. Phase II then took a holistic approach by combining all the technologies that showed positive results during phase one development.

  16. New Solicitation Supports U.S. Innovation with Renewable Energy...

    Broader source: Energy.gov (indexed) [DOE]

    New Solicitation Supports U.S. Innovation with Renewable Energy and Energy Efficiency Peter W. Davidson Peter W. Davidson Executive Director of the Loan Programs Office (LPO)...

  17. Innovative nuclear thermal propulsion technology evaluation: Results of the NASA/DOE Task Team study

    SciTech Connect (OSTI)

    Howe, S. (Los Alamos National Lab., NM (United States)); Borowski, S. (National Aeronautics and Space Administration, Cleveland, OH (United States). Lewis Research Center); Motloch, C. (EG and G Idaho, Inc., Idaho Falls, ID (United States)); Helms, I. (Nuclear Utility Services, Damascus, MD (United States)); Diaz, N.; Anghaie, S. (Florida Univ., Gainesville, FL (United States)); Latham, T. (United

    1991-01-01T23:59:59.000Z

    In response to findings from two NASA/DOE nuclear propulsion workshops held in the summer of 1990, six task teams were formed to continue evaluation of various nuclear propulsion concepts. The Task Team on Nuclear Thermal Propulsion (NTP) created the Innovative Concepts Subpanel to evaluate thermal propulsion concepts which did not utilize solid fuel. The Subpanel endeavored to evaluate each of the concepts on a level technological playing field,'' and to identify critical technologies, issues, and early proof-of-concept experiments. The concepts included the liquid core fission, the gas core fission, the fission foil reactors, explosively driven systems, fusion, and antimatter. The results of the studies by the panel will be provided. 13 refs., 6 figs., 2 tabs.

  18. Validation of Innovative Exploration Technologies for Newberry Volcano: Geochemistry data from 55-29 and 46-16 wells at Newberry 2012

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Jaffe, Todd

    Validation of Innovative Exploration Technologies for Newberry Volcano: Geochemistry data from 55-29 and 46-16 wells at Newberry 2012

  19. 31 from R&D Innovator Volume 2, Number 4 April 1993 Three Silly Notions About Technology Transfer: And One That's Not

    E-Print Network [OSTI]

    Berry, R. Stephen

    31 from R&D Innovator Volume 2, Number 4 April 1993 Three Silly Notions About Technology Transfer://chemistry.uchicago.edu/fac/berry.shtml Innovation: What are the roles of basic and applied research? What are the roles of industries and universities? Industries need innovation just to stay in business, let alone compete successfully in the global

  20. Innovation: A data-driven approach Andrew Kusiak

    E-Print Network [OSTI]

    Kusiak, Andrew

    . Some prefer the terms ``technology-based innovation'' or ``technological innovation'' to emphasizeInnovation: A data-driven approach Andrew Kusiak Mechanical and Industrial Engineering, 3131 online 24 June 2009 Keywords: Innovation science Data mining Innovation rules Innovation framework

  1. Small Business Loans (New Mexico)

    Broader source: Energy.gov [DOE]

    The Loan Fund, a non-profit organization, offers loans for small businesses and start-ups, and for business lines of credit. The loan can be used to finance equipment, inventory, building...

  2. Alternative Energy Conservation Loan Fund

    Broader source: Energy.gov [DOE]

    The maximum loan amount is $50,000. Applications for loans over $30,000 must include a letter of denial from a financial institution stating the reason for denial, or specifying that the loan is ...

  3. Innovative Clean Coal Technology (ICCT): Demonstration of innovative applications of technology for cost reductions to the CT-121 FGD process. Quarterly report No. 6, July--September 1991

    SciTech Connect (OSTI)

    Not Available

    1991-11-15T23:59:59.000Z

    The project`s objective is to demonstrate innovative applications of technology for cost reduction for the Chiyoda Thoroughbred-121 (CT-121) process. The CT-121 process is a wet FGD process that removes SO{sub 2}, can achieve simultaneous particulate control, and can produce a salable by-product gypsum thereby reducing or even eliminating solid waste disposal problems. Figure 1 shows a flow schematic of the process. CT-121 removes SO{sub 2} and particulate matter in a unique limestone-based scrubber called the Jet Bubbling Reactor (JBR). IN the JBR, flue gas bubbles beneath the slurry, SO{sub 2} is absorbed, and particulate matter is removed from the gas. The agitator circulates limestone slurry to ensure that fresh reactant is always available in the bubbling or froth zone sot that SO{sub 2} removal can proceed at a rapid rate. Air is introduced into the bottom of the JBR to oxidize the absorbed SO{sub 2} to sulfate, and limestone is added continuously to neutralize the acid slurry and form gypsum. The JBR is designed to allow ample time for complete oxidation of the SO{sub 2}, for complete reaction of the limestone, and for growth of large gypsum crystals. The gypsum slurry is continuously withdrawn from the JBR and is to be dewatered in a gypsum stack. The stacking technique involves filing a diked area with gypsum slurry, allowing the gypsum solids to settle, and removing clear liquid from the top of the stack for recycle back to the process.

  4. Loans | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    from the Energy Department and other U.S. government agencies. May 22, 2013 Moniz: Tesla Repayment Shows the Strength of Energy Department's Overall Loan Portfolio Tesla...

  5. Alternative Loan Program (Missouri)

    Broader source: Energy.gov [DOE]

    The Missouri Department of Agriculture offers direct loans through the Agriculture Development Fund to finance the production, processing and marketing needs of an alternative agricultural...

  6. Methane Digester Loan Program

    Broader source: Energy.gov [DOE]

    Established in 1998, the Minnesota Dept. of Agriculture Methane Digester Loan Program helps livestock producers install on-farm anaerobic digesters used for the production of electricity by...

  7. Energy Efficiency Loan Program

    Broader source: Energy.gov [DOE]

    The Keystone HELP Energy Efficiency Loan Program is designed to help homeowners improve energy efficiency with special financing for high-efficiency heating, air conditioning, insulation, windows,...

  8. Position-sensitive radiation monitoring (surface contamination monitor). Innovative technology summary report

    SciTech Connect (OSTI)

    Not Available

    1999-06-01T23:59:59.000Z

    The Shonka Research Associates, Inc. Position-Sensitive Radiation Monitor both detects surface radiation and prepares electronic survey map/survey report of surveyed area automatically. The electronically recorded map can be downloaded to a personal computer for review and a map/report can be generated for inclusion in work packages. Switching from beta-gamma detection to alpha detection is relatively simple and entails moving a switch position to alpha and adjusting the voltage level to an alpha detection level. No field calibration is required when switching from beta-gamma to alpha detection. The system can be used for free-release surveys because it meets the federal detection level sensitivity limits requires for surface survey instrumentation. This technology is superior to traditionally-used floor contamination monitor (FCM) and hand-held survey instrumentation because it can precisely register locations of radioactivity and accurately correlate contamination levels to specific locations. Additionally, it can collect and store continuous radiological data in database format, which can be used to produce real-time imagery as well as automated graphics of survey data. Its flexible design can accommodate a variety of detectors. The cost of the innovative technology is 13% to 57% lower than traditional methods. This technology is suited for radiological surveys of flat surfaces at US Department of Energy (DOE) nuclear facility decontamination and decommissioning (D and D) sites or similar public or commercial sites.

  9. Measuring the U.S.-China Innovation Gap: Initial Findings of the UCSD-Tsinghua Innovation Metrics Survey Project

    E-Print Network [OSTI]

    2013-01-01T23:59:59.000Z

    STUDY OF INNOVATION AND TECHNOLOGY IN CHINA POLICY BRIEF STIThe Study of Innovation and Technology in China (SITC) is aof Science, Technology, and Innovation: Interim Report,”

  10. Commercializing Light-Duty Plug-In/Plug-Out Hydrogen-Fuel-Cell Vehicles: "Mobile Electricity" Technologies, Early California Household Markets, and Innovation Management

    E-Print Network [OSTI]

    Williams, Brett D

    2010-01-01T23:59:59.000Z

    Mobile Electricity” Technologies, Early California Household Markets, and Innovation ManagementMobile Electricity” Technologies, Early California Household Markets, and Innovation Managementtechnology-management, and strategic-marketing lenses to the problem of commercializing H 2 FCVs, other EDVs, and other Mobile

  11. Economic Recovery Loan Program (Maine)

    Broader source: Energy.gov [DOE]

    The Economic Recovery Loan Program provides subordinate financing to help businesses remain viable and improve productivity. Eligibility criteria are based on ability to repay, and the loan is...

  12. Mississippi Loan Guaranty Program (Mississippi)

    Broader source: Energy.gov [DOE]

    The Mississippi Loan Guaranty Program, administered by the Mississippi Business Finance Corporation ("MBFC"), enables small businesses to obtain term financing through the use of loan guarantees....

  13. Analysis of Innovative HVAC System Technologies and Their Application for Office Buildings in Hot and Humid Climates

    E-Print Network [OSTI]

    Tanskyi, Oleksandr

    2012-02-14T23:59:59.000Z

    air distribution system VAV ? Variable air volume VFD ? Variable frequency drive wb ? wet-bulb WERC ? Wisenbaker Engineering Research Center viii TABLE OF CONTENTS Page ABSTRACT... fulfillment of the requirements for the degree of MASTER OF SCIENCE December 2010 Major Subject: Mechanical Engineering Analysis of Innovative HVAC System Technologies and Their Application for Office...

  14. On Military Innovation: Toward an Analytical Framework

    E-Print Network [OSTI]

    Ross, Andrew L

    2010-01-01T23:59:59.000Z

    new The Study of Innovation and Technology in China (SITC)components of military innovation (technology, doctrine, andinnovations: robotics and information technologies for

  15. Opportunity Thinking for Open Innovation innovation?

    E-Print Network [OSTI]

    Ghosh, Joydeep

    · Technology innovation process · Shared services Copyright © 2012 NewEdge25 #12;Leveraging multiple sourcesOpportunity Thinking for Open Innovation #12;Why open innovation? Copyright © 2012 NewEdge2 #12;Opportunity! Open innovation promises to make an attractive opportunity even more attractive. · Better

  16. Published in the Proc. of GLOGIFT, Dec. 26-29, 2004, Inst. of Tech. Mgmt., Mussoorie, India, pp. 141-152 Practical Aspects of Technology and Innovation Capability Building

    E-Print Network [OSTI]

    Saha, Subir Kumar

    . 141-152 1 Practical Aspects of Technology and Innovation Capability Building: Learning from the Case@mech.iitd.ac.in Abstract Technology and innovation capabilities are becoming important as Indian organizations and firms and sustained. Our ongoing research on technology and innovation management and their role in competitiveness

  17. National Instruments and The Engineer Celebrate the Best of British Engineering at the 2008 Technology & Innovation Awards | News | The Engineer http://www.theengineer.co.uk/news/national-instruments-and-the-engineer-celebrate-the-best-of-british-engineer

    E-Print Network [OSTI]

    Anderson, Jim

    Technology & Innovation Awards | News | The Engineer http://www.theengineer.co.uk/news/national-instruments-and-the-engineer-celebrate-the-best-of-british-engineering-at-the-2008-technology-and-innovation and The Engineer Celebrate the Best of British Engineering at the 2008 Technology & Innovation Awards 29 October

  18. Summary of innovative concepts for industrial process improvement: An experimental technology exchange

    SciTech Connect (OSTI)

    Conger, R.L. [Pacific Northwest Lab., Richland, WA (United States); Lee, V.E.; Buel, L.M. [eds.] [Pacific Northwest Lab., Richland, WA (United States)

    1995-08-01T23:59:59.000Z

    This document is a compilation of one-page technical briefs that summarize the highlights of thirty-eight innovations that were presented at the seventh Innovative Concepts Fair, held in Denver, Colorado on April 20--21, 1995. Sixteen of the innovations were funded through the Innovative Concepts Program, and twenty-two innovations represent other state or federally funded programs. The concepts in this year`s fair addressed innovations that can substantially improve industrial processes. Each tech brief describes the need for the proposed concept; the concept being proposed; and the concept`s economics and market potential, key experimental results, and future development needs. A contact block is also included with each flier.

  19. Fundamentals of Melt-Water Interfacial Transport Phenomena: Improved Understanding for Innovative Safety Technologies in ALWRs

    SciTech Connect (OSTI)

    M. Anderson; M. Corradini; K.Y. Bank; R. Bonazza; D. Cho

    2005-04-26T23:59:59.000Z

    The interaction and mixing of high-temperature melt and water is the important technical issue in the safety assessment of water-cooled reactors to achieve ultimate core coolability. For specific advanced light water reactor (ALWR) designs, deliberate mixing of the core-melt and water is being considered as a mitigative measure, to assure ex-vessel core coolability. The goal of this work is to provide the fundamental understanding needed for melt-water interfacial transport phenomena, thus enabling the development of innovative safety technologies for advanced LWRs that will assure ex-vessel core coolability. The work considers the ex-vessel coolability phenomena in two stages. The first stage is the melt quenching process and is being addressed by Argonne National Lab and University of Wisconsin in modified test facilities. Given a quenched melt in the form of solidified debris, the second stage is to characterize the long-term debris cooling process and is being addressed by Korean Maritime University in via test and analyses. We then address the appropriate scaling and design methodologies for reactor applications.

  20. Green Energy Loans

    Broader source: Energy.gov [DOE]

    Illinois business owners, non-profit organizations, and local governments seeking loans for certain energy efficiency and renewable energy upgrades may apply for a rate reduction, under the Green...

  1. Microenterprise Loan Program (Kentucky)

    Broader source: Energy.gov [DOE]

    In partnership with Community Ventures Corporation, a non-profit community based lender, the Kentucky Cabinet for Economic Development has expanded the Kentucky Micro-Enterprise Loan (KMEL) program...

  2. Templeman Library Journal loan

    E-Print Network [OSTI]

    Banaji,. Murad

    Templeman Library Journal loan Only postgraduate students or academic staff can borrow journals ............................................................................ * Initials ............................................................................ * Library card number ............................................................................ Fields marked * are required The item will be issued to your Library account for one week, normally

  3. Revolving Loan Funds (RLF)

    Broader source: Energy.gov (indexed) [DOE]

    Revolving Loan Funds (RLF) Sam Booth National Renewable Energy laboratory 6 July 2009 Overview Under the American Recovery and Reinvestment Act (ARRA) funding totaling 3.1 B is...

  4. CERNA WORKING PAPER SERIES What drives innovation in nuclear reactors technologies?

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    driven by the conventional paradigm where both demand- pull, measured by NPPs constructions that the impact of public R&D expenditures and national NPPs construction on innovation is stronger when on innovation, one the other hand, regulatory decisions to temporarily close a NPP have an adverse impact

  5. All material in this document is the intellectual property of Technology and Innovation Management Group at RWTH Aachen University and/or the respective author/owner. Any copying, distribution,

    E-Print Network [OSTI]

    Di Pillo, Gianni

    All material in this document is the intellectual property of Technology and Innovation Management on the Attraction of Innovation Roles in Open Innovation Web-Based Platforms By Cinzia Battistella, Fabio Nonino-Creation: Bridging Mass Customization & Open Innovation November 16-19, 2011 San Francisco Airport Marriott

  6. A Critical Analysis of Technological Innovation and Economic Development in Southern California's Urban Water Reuse And Recycling Industry

    E-Print Network [OSTI]

    Pilip-Florea, Shadrach Jay

    2012-01-01T23:59:59.000Z

    Water Task Force, “Water Recycling 2030: Recommendation’s of2007. Water Funding Recycling Program Strategic Plan. Web.grants_loans/water_recycling/docs/strategicplan2007.pdf

  7. Commercializing Light-Duty Plug-In/Plug-Out Hydrogen-Fuel-Cell Vehicles:“Mobile Electricity” Technologies, Early California Household Markets, and Innovation Management

    E-Print Network [OSTI]

    Williams, Brett D

    2007-01-01T23:59:59.000Z

    Mobile Electricity” Technologies, Early California Household Markets, and Innovation Managementtechnology-management, and strategic-marketing lenses to the problem of commercializing H 2 FCVs, other EDVs, and other Mobile

  8. Renewable Energy & Energy Efficiency Projects: Loan Guarantee...

    Energy Savers [EERE]

    Renewable Energy & Energy Efficiency Projects: Loan Guarantee Solicitation Renewable Energy & Energy Efficiency Projects: Loan Guarantee Solicitation Plenary III: Project Finance...

  9. HUD PowerSaver Pilot Loan Program

    E-Print Network [OSTI]

    Zimring, Mark

    2011-01-01T23:59:59.000Z

    renewable energy improvements) 10% of each loan 100% at closing HUD PowerSaver Pilot Loan Program Potential

  10. UU Innovation UUAB Holding

    E-Print Network [OSTI]

    Uppsala Universitet

    UU Innovation UUAB Holding ANNUAL REVIEW 2013 #12;UU Innovation is the central innovation support at the university. Through UUAB Holding the university can contribute to licensing of new technology and establish new research-based companies. IN BRIEF UU INNOVATION UUAB HOLDING TO FACILITATE MUTUAL knowledge

  11. Office of Technology Transfer and Innovation Partnerships, PO Box 6000, Binghamton, NY, 13902-6000. Ph: (607) 777-5870. FORM TT-2 Revised 03/19/09 FORM TT -2

    E-Print Network [OSTI]

    Suzuki, Masatsugu

    Office of Technology Transfer and Innovation Partnerships, PO Box 6000, Binghamton, NY, 13902-6000. Ph: (607) 777-5870. FORM TT-2 Revised 03/19/09 FORM TT - 2 Technology Transfer NEW TECHNOLOGY DISCLOSURE PLEASE SUBMIT COMPLETED FORM TO OFFICE OF TECHNOLOGY TRANSFER AND INNOVATIVE PARTNERSHIPS 1

  12. Templeman Library Official publication loan

    E-Print Network [OSTI]

    Banaji,. Murad

    Templeman Library Official publication loan Use this form to borrow items from the British ............................................................................ * Initials ............................................................................ * Library card number ............................................................................ Fields marked * are required The item will be issued to your Library account as an Ordinary Loan item

  13. Higher Education Energy Loan Program

    Broader source: Energy.gov [DOE]

    All projects must be shown to reduce energy consumption, have a positive return on investment, and be able to be repaid within 6 years. Loan funds may not be used to pay off an existing loan, but...

  14. Regional 166 Direct Loan (Ohio)

    Broader source: Energy.gov [DOE]

    The Ohio Development Services Agency's (ODSA) Regional 166 Direct Loan provides low-interest loans to businesses creating new jobs or preserving existing employment opportunities in the State of Ohio.

  15. Loan Enhancement Program (New Hampshire)

    Broader source: Energy.gov [DOE]

    The Loan Enhancement Program enables bank and other lending institutions to provide up to 90% fixed asset financing by guaranteeing that the portion of the loan exceeding the bank’s lending...

  16. French Atomic Energy Commission innovation program for future reactors research and development on safety systems and new technologies

    SciTech Connect (OSTI)

    Raymond, P. [Commissariat a l`Energie Atomique, St. Paul lez Durance (France)

    1997-12-01T23:59:59.000Z

    The CEA R&D program for water nuclear reactors is mainly divided in three program issues: R&D for operating reactors, R&D for the next generation of reactor in support of the European Pressurised Reactor (EPR) project - Innovative systems and future reactors. This {open_quotes}Innovative Systems and future reactors{close_quotes} R&D program involves various mean and long term studies on the following fields: Advanced Core Design and Fuel Cycle Strategies; New safety systems and technologies - Severe accident - Reactors evaluation and design - Advanced fuels, absorbers and burnable poisons. In the following communication, we will present the motivations, the objectives and the main results of the various research programs linked to these items. 19 refs., 6 figs.

  17. The Evolving Organization of U.S. Innovation Agencies: An Overview

    E-Print Network [OSTI]

    BONVILLIAN, William B.

    2013-01-01T23:59:59.000Z

    STUDY OF INNOVATION AND TECHNOLOGY IN CHINA POLICY BRIEF STIThe Study of Innovation and Technology in China (SITC) is ato Energy Innovation,” Journal of Technology Transfer (Oct.

  18. Scientific Innovation Through Integration Investing in Innovation

    E-Print Network [OSTI]

    Scientific Innovation Through Integration Investing in Innovation: EMSL and the American Recovery transfer (FRET) in living cells. Transcriptional profiling using next-generation sequencing technology (RNA Act, EMSL users are benefitting from a $60 million investment in innovation that will further develop

  19. Printdatum: 18 juli 2011 Versie: juni 2011 Blad 1 van 2 Rabobank Student PC Loan

    E-Print Network [OSTI]

    Franssen, Michael

    your studies, Eindhoven University of Technology will offer you the opportunity to purchase a notebook Rabobank Eindhoven-Veldhoven, together with Eindhoven University of Technology, is willing to offer you an interest-free loan in the amount of EUR 780. What is the loan for? Rabobank Eindhoven-Veldhoven will pay

  20. ALTERNATIVE TRANSPORTATION FUELS WORKSHOP Organized by: the INNOVATIVE ENERGY and ENVIRONMENTAL TECHNOLOGY WORKGROUP

    E-Print Network [OSTI]

    Garfunkel, Eric

    Department of Environmental Protection 10:00 ­ 12:00 pm Session I ­ Natural Gas and Biomethane ­ Moderator: Chuck Feinberg, Chairman, New Jersey Clean Cities Coalition Bill Wells, NJ Natural Gas Graham BarkerALTERNATIVE TRANSPORTATION FUELS WORKSHOP Organized by: the INNOVATIVE ENERGY and ENVIRONMENTAL

  1. Air Quality and Intelligent Transportation Systems: Understanding Integrated Innovation, Deployment and Adaptation of Public Technologies

    E-Print Network [OSTI]

    de Weck, Olivier L.

    and Adaptation of Public Technologies by Rebecca Susanne Dodder B.A. Physics and Spanish 7 8anderbilt University and Adaptation of Public Technologies by Rebecca Susanne Dodder Submitted to the Engineering Systems Division

  2. State Clean Energy Policies Analysis: State, Utility, and Municipal Loan Programs

    SciTech Connect (OSTI)

    Lantz, E.

    2010-05-01T23:59:59.000Z

    High initial costs can impede the deployment of clean energy technologies. Financing can reduce these costs. And, state, municipal, and utility-sponsored loan programs have emerged to fill the gap between clean energy technology financing needs and private sector lending. In general, public loan programs are more favorable to clean energy technologies than are those offered by traditional lending institutions; however, public loan programs address only the high up-front costs of clean energy systems, and the technology installed under these loan programs rarely supports clean energy production at levels that have a notable impact on the broader energy sector. This report discusses ways to increase the impact of these loan programs and suggests related policy design considerations.

  3. Decontamination and Conversion of Nickel Radioactive Scrap Metal. Innovative Technology Summary Report

    SciTech Connect (OSTI)

    NONE

    2001-04-01T23:59:59.000Z

    This document contains information on the above-mentioned technology, including description, applicability, cost, and performance data.

  4. Jason Crusan -Chief Technologist for Space Operations Presentation to the NAC Technology and Innovation

    E-Print Network [OSTI]

    Christian, Eric

    /27/08) ­ CRADA w/USDA for plant & animal cell line development; limited funding from Maryland State Technology

  5. Kansas BEST for Innovation 1 B.E.S.T.for Innovation

    E-Print Network [OSTI]

    for Science and Technology for Innovation #12;Kansas B.E.S.T. for Innovation 2 Acknowledgments The drafters and Technology for Innovation (Kansas B.E.S.T. for Innovation)--Kansas can capitalize on the inherent streKansas BEST for Innovation 1 KANSAS B.E.S.T.for Innovation Kansas: Building an Environment

  6. Go to http://www.nist.gov/tip for more information TECHNOLOGY INNOVATION PROGRAM

    E-Print Network [OSTI]

    Magee, Joseph W.

    and additional classes of materials (glasses and ceramics). TIP published the white paper "Manufacturing of Standards and Technology Gaithersburg, MD 20899 ADVANCED TECHNOLOGIES FOR MANUFACTURING The Technology addressed. Manufacturing due to its criticality to the Nation has been an early area for TIP investment

  7. The Global Commercialization Group facilitates the growth and development of innovative technology-based businesses in a variety of regions worldwide. GCG programs simultaneously provide commercialization know-how to local partner organizations

    E-Print Network [OSTI]

    Ghosh, Joydeep

    The Global Commercialization Group facilitates the growth and development of innovative technology-how to local partner organizations while proactively moving science and innovation from the region the tools, training programs, experience, and network to help regions move innovation into the international

  8. Energy Department's Loan Portfolio Continues Strong Performance...

    Broader source: Energy.gov (indexed) [DOE]

    We think those results show that LPO is succeeding in its mission to help finance the first commercial deployments of innovative technologies in the U.S. In addition...

  9. Clark Public Utilities- Residential Weatherization Loan Program

    Broader source: Energy.gov [DOE]

    Loans of up to $15,000 at a 5.25% interest are available through Clark Public Utilities' Weatherization Loan Program. The loans can pay for the average local cost of eligible measures, based on...

  10. Renewable Energy Facilities Revolving Loan Fund (Delaware)

    Broader source: Energy.gov [DOE]

    Renewable Energy Facilities Revolving Loan Fund provides loans at market to below-market interest rates to businesses that cannot otherwise obtain capital, provided that those businesses will...

  11. Santee Cooper- Smart Energy Loan Program

    Broader source: Energy.gov [DOE]

    Santee Cooper provides low interest loans to residential customers to improve the efficiency of homes through the Smart Energy loan program. Customers can apply for energy efficient improvement...

  12. Farm and Aquaculture Alternative Energy Loan

    Broader source: Energy.gov [DOE]

    In July 2008 Hawaii enacted legislation (HB 2261) which created a loan program for agriculture and aquaculture renewable energy projects. Farmers and aquaculturists may receive loans for projects...

  13. Montana Alternative Energy Revolving Loan Program

    Broader source: Energy.gov (indexed) [DOE]

    Montana Alternative Energy Revolving Loan Program Kathi Montgomery MT Dept Environmental Quality kmontgomery@mt.gov 406-841-5243 Montana Alternative Energy Revolving Loan Program...

  14. Rural Enterprise Assistance Project's Loan Program (Nebraska)

    Broader source: Energy.gov [DOE]

    The Rural Enterprise Assistance Project (REAP) offers four services: financing (micro loans), business training, technical assistance, and networking. REAP's Loan Program focuses on providing...

  15. Sustainable Energy Revolving Loan Fund LOAN AGREEMENT FORM

    E-Print Network [OSTI]

    Escher, Christine

    Sustainable Energy Revolving Loan Fund LOAN AGREEMENT FORM OREGON STATE BOARD OF HIGHER EDUCATION) and end (date). Given this timeline, the Applicant agrees to provide no fewer than project update(s). These updates will be spread approximately evenly across the project timeline. Updates will consist of concise

  16. Demonstration of Innovative Applications of Technology for the CT-121 FGD Process. Project performance summary, Clean Coal Technology Demonstration Project

    SciTech Connect (OSTI)

    none,

    2002-08-01T23:59:59.000Z

    This project is part of the U.S. Department of Energy?s (DOE) Clean Coal Technology Demonstration Program (CCTDP) established to address energy and environmental concerns related to coal use. DOE sought cost-shared partnerships with industry through five nationally competed solicitations to accelerate commercialization of the most promising advanced coal-based power generation and pollution control technologies. The CCTDP, valued at over five billion dollars, has significantly leveraged federal funding by forging effective partnerships founded on sound principles. For every federal dollar invested, CCTDP participants have invested two dollars. These participants include utilities, technology developers, state governments, and research organizations. The project presented here was one of sixteen selected from 55 proposals submitted in 1988 and 1989 in response to the CCTDP second solicitation.

  17. K-12 Professional Learning Communities (PLCs) in a Rural School District on the High Plains of Texas: Mechanism for Teacher Support of Innovative Formative Assessment and Instruction with Technology (iFAIT)

    E-Print Network [OSTI]

    Talkmitt, Marcia J.

    2013-05-06T23:59:59.000Z

    The purpose of this study was to explore the evolution of collaborative practices of PLCs as they emerge when using technology based formative assessment via iFAIT or innovative Formative Assessment with Instruction and Technology developed...

  18. US DOE Office of Technology Innovation and Development - Integration of the EM R and D Program in 2012 and Beyond - 12537

    SciTech Connect (OSTI)

    Collazo, Yvette T.; DeLeon, Gary; Schneider, Steve; Gerdes, Kurt; Szilagyi, Andy [Office of Technology Innovation and Development, U.S. DOE, Washington, DC 20585 (United States); Wellman, Dawn; Bredt, Paul [Pacific Northwest National Laboratory, Richland, Washington 99352 (United States); Pierce, Eric [Oak Ridge National Laboratory, Oak Ridge, Tennessee, 37831 (United States); Marra, Jim [Savannah River National Laboratory, Aiken, South Carolina 29808 (United States)

    2012-07-01T23:59:59.000Z

    Applied research and technology development has the potential to accelerate environmental cleanup and reduce the cost for cleanup and closure of U.S. Department of Energy (DOE) legacy waste sites throughout the United States. Providing the scientific understanding, knowledge, and technologies to enable successful completion of the DOE Office of Environmental Management (EM) mission, the Technology Innovation and Development program is transforming science and innovation into practical solutions for environmental cleanup. Through integration, collaboration, and communication with DOE partner organization, DOE site managers and contractors, these technologies will reduce human health and environmental risk, cost, and time associated with cleanup and closure. The Office of Technology Innovation and Development (OTID) focused efforts in fiscal year 2011 (FY 2011) to a proactive, visionary program balance with integrated, cross-disciplinary applied research and technology development activities. This transition provides the necessary scientific and technical advancements to address near-term needs. In addition, it fills the critical role in providing scientific approaches and advanced technologies that look beyond today's known needs and requirements to provide innovative technologies to make the necessary long-term changes required to facilitate cleanup and bring sites to closure. The outcomes and impacts of this strategy are summarized in the Impact Plan, which describes potential reduction in life-cycle costs through the development and deployment of advanced technologies supporting EM needs associated with waste processing, groundwater and soil remediation, deactivation and decommissioning, and spent nuclear fuel and materials disposition. Additionally, the OTID International Program Strategic Plan 2010-2015 outlines cooperation and collaboration with the international community that has similar nuclear legacy management experience and expertise to foster transfer of best science practices being used in the field. (authors)

  19. Energy Department Announces $10 Million to Advance Innovative, Energy-Saving Lighting Technologies

    Broader source: Energy.gov [DOE]

    As part of cutting energy waste and doubling energy productivity by 2030, the Energy Department today announced nearly $10 million to support research, development, and manufacturing of solid-state lighting (SSL) technologies across the country.

  20. 24M Technologies: Using Innovation to Solve the Energy Storage Challenge

    Broader source: Energy.gov [DOE]

    A look at 24M Technologies, a company that's changing the way we think about renewable energy storage by intersecting industry, academics and government to launch new ideas that will offer solutions to the challenges we face.

  1. Gas Technology Institute and Encorp Inc.: Innovative Interconnection and Control Systems

    SciTech Connect (OSTI)

    Not Available

    2003-01-01T23:59:59.000Z

    Summarizes the work of the Gas Technology Institute and Encorp Inc., under contract to DOEs Distribution and Interconnection R&D, to develop interconnection and control systems for distributed power.

  2. Gas Technology Institute and Encorp Inc.: Innovative Interconnection and Control Systems

    SciTech Connect (OSTI)

    Not Available

    2003-10-01T23:59:59.000Z

    Summarizes the work of the Gas Technology Institute and Encorp Inc., under contract to DOE's Distribution and Interconnection R&D, to develop interconnection and control systems for distributed power.

  3. Managing technological innovation and sustaining competitive advantage in the digital imaging industry

    E-Print Network [OSTI]

    Ishii, Katsuki

    2005-01-01T23:59:59.000Z

    The emergence and adoption of a disruptive technology that replaces an existing industry platform not only has enormous implications to incumbent firms, but also creates business opportunities that is enabled by the newly ...

  4. A cost/benefit model for insertion of technological innovation into a total quality management program 

    E-Print Network [OSTI]

    Ratliff, William L

    1997-01-01T23:59:59.000Z

    justify quality improvement. The results of this study provide process-level engineers with a cost/benefit model template, which can be used to cost justify technological improvement based upon total quality costs....

  5. Evolution and System Characteristics of China’s Science, Technology, and Innovation Policies

    E-Print Network [OSTI]

    WANG, Yuan

    2013-01-01T23:59:59.000Z

    China began its S&T system reform, featuring cuts on direct gov-gov- ernment leaders who all put science and technology in a central position in China’

  6. The MIT Libraries seek an innovative and enterprising leader to fill its senior technology position. The Associate Director for Information Technology and Digital Development leads the Libraries' technology

    E-Print Network [OSTI]

    technology position. The Associate Director for Information Technology and Digital Development leads the Libraries' technology strategy and manages IT development in furtherance of the Libraries' initiatives and priorities. S/he has broad responsibility for information technology across the Libraries, including

  7. Making wastewater environmentally sustainable: Innovative technology offers new possibilities for wastewater treatment

    E-Print Network [OSTI]

    Heinrich, Katie

    2013-01-01T23:59:59.000Z

    Inc., a wastewater screening equipment engineering company in Houston, the NCEBR is a#22;empting to accelerate the move of e-beam technology commercialization from the research laboratory to the marketplace, Pillai said. E-beam processing... in their treatment of wastewater by pursuing new electron beam (e-beam) technology being researched at a Texas A&M AgriLife Research center in College Station. To help these plants in their move to increased sustainability in wastewater treatment, the National...

  8. Innovative technology for expedited site remediation of extensive surface and subsurface contamination

    SciTech Connect (OSTI)

    Audibert, J.M.E.; Lew, L.R.

    1994-12-31T23:59:59.000Z

    Large scale surface and subsurface contamination resulted from numerous releases of feed stock, process streams, waste streams, and final product at a major chemical plant. Soil and groundwater was contaminated by numerous compounds including lead, tetraethyl lead, ethylene dibromide, ethylene dichloride, and toluene. The state administrative order dictated that the site be investigated fully, that remedial alternative be evaluated, and that the site be remediated within a year period. Because of the acute toxicity and extreme volatility of tetraethyl lead and other organic compounds present at the site and the short time frame ordered by the regulators, innovative approaches were needed to carry out the remediation while protecting plant workers, remediation workers, and the public.

  9. Affordable Solar Energy Solar Powder is a solar-energy company that has developed an innovative technology that will set a new

    E-Print Network [OSTI]

    Jawitz, James W.

    Affordable Solar Energy Solar Powder is a solar-energy company that has developed an innovative technology that will set a new low cost point for solar energy. The company plans to manufacture and distribute high-efficiency, high yield, low cost solar panels. The company is making green energy more

  10. UChicagoTech, the University of Chicago Center for Technology Development & Ventures, launched the Innovation Fund in 2010 to accelerate the commercialization of promising,

    E-Print Network [OSTI]

    He, Chuan

    at the University of Chicago. Since 2010, the fund has invested $1.5 millionin a total of 23 projectsacross the University. These projects have received more than $7 millionso far in follow-on funding. Innovation FundUChicagoTech, the University of Chicago Center for Technology Development & Ventures, launched

  11. Frameworks for Analyzing Chinese Defense and Military Innovation

    E-Print Network [OSTI]

    Cheung, Tai Ming; Mahnken, Thomas G; Ross, Andrew L

    2011-01-01T23:59:59.000Z

    on the Study of Innovation and Technology in China (SITC),The Study of Innovation and Technology in China (SITC) is a1) the components of innovation: technology, doctrine, and

  12. Comprehensive Energy Projects (CEP) and Innovative Financing...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Comprehensive Energy Projects (CEP) and Innovative Financing Comprehensive Energy Projects (CEP) and Innovative Financing Presented at the Technology Transition Corporation and...

  13. Energy Innovation Assistance Program (EIAP) (Quebec, Canada)

    Broader source: Energy.gov [DOE]

    The Energy innovation assistance program (PAIE) aims to encourage the development of new technologies or innovative processes focusing on energy efficiency or emerging energy sources by financially...

  14. Enterprise Innovation Institute Annual Report 2011

    E-Print Network [OSTI]

    Das, Suman

    The Enterprise Innovation Institute is headquartered at Technology Square on Georgia Tech's campus. Helped of science, technology, and innovation. During fiscal year 2011, the Enterprise Innovation Institute: 2 #12 is to help enterprises of all kinds apply sci- ence, technology, and innovation to improve their bottom lines

  15. SHARING AND DEPLOYING INNOVATIVE INFORMATION TECHNOLOGY SOLUTIONS TO MANAGE WASTE ACROSS THE DOE COMPLEX

    SciTech Connect (OSTI)

    Crolley, R.; Thompson, M.

    2011-01-31T23:59:59.000Z

    There has been a need for a faster and cheaper deployment model for information technology (IT) solutions to address waste management needs at US Department of Energy (DOE) complex sites for years. Budget constraints, challenges in deploying new technologies, frequent travel, and increased job demands for existing employees have prevented IT organizations from staying abreast of new technologies or deploying them quickly. Despite such challenges, IT organizations have added significant value to waste management handling through better worker safety, tracking, characterization, and disposition at DOE complex sites. Systems developed for site-specific missions have broad applicability to waste management challenges and in many cases have been expanded to meet other waste missions. Radio frequency identification (RFID) and global positioning satellite (GPS)-enabled solutions have reduced the risk of radiation exposure and safety risks. New web-based and mobile applications have enabled precision characterization and control of nuclear materials. These solutions have also improved operational efficiencies and shortened schedules, reduced cost, and improved regulatory compliance. Collaboration between US Department of Energy (DOE) complex sites is improving time to delivery and cost efficiencies for waste management missions with new information technologies (IT) such as wireless computing, global positioning satellite (GPS), and radio frequency identification (RFID). Integrated solutions developed at separate DOE complex sites by new technology Centers of Excellence (CoE) have increased material control and accountability, worker safety, and environmental sustainability. CoEs offer other DOE sister sites significant cost and time savings by leveraging their technology expertise in project scoping, implementation, and ongoing operations.

  16. Showcasing Solar Technologies from San José Companies at the Tech Museum of Innovation

    Broader source: Energy.gov [DOE]

    In May 2007, the City of San José won a Solar America Showcase award from the US Department of Energy. This award offers technical assistance to help the City realize its ambitious solar technology deployment goals on large buildings and complexes mainly in the revitalized downtown area. In July 2007, a DOE Tiger Team — led by Cécile Warner of the National Renewable Energy Laboratory (NREL) — met with numerous city officials to discuss the City’s solar plans in detail and visit the various sites under consideration for solar technology adoption.

  17. Innovative experimental particle physics through technological advances: Past, present and future

    SciTech Connect (OSTI)

    Cheung, Harry W.K.; /Fermilab

    2005-01-01T23:59:59.000Z

    This mini-course gives an introduction to the techniques used in experimental particle physics with an emphasis on the impact of technological advances. The basic detector types and particle accelerator facilities will be briefly covered with examples of their use and with comparisons. The mini-course ends with what can be expected in the near future from current technology advances. The mini-course is intended for graduate students and post-docs and as an introduction to experimental techniques for theorists.

  18. Technology Innovations to Improve Biomass Cookstoves to Meet Tier 4 Standards

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOriginEducationVideoStrategic| DepartmentDepartment of Energy TechnologyDepartmentTechnology

  19. Surveying China’s Science and Technology Human Talents Programs

    E-Print Network [OSTI]

    YANG, Fan

    2015-01-01T23:59:59.000Z

    STUDY OF INNOVATION AND TECHNOLOGY IN CHINA RESEARCH BRIEFThe Study of Innovation and Technology in China (SITC) is ain Science and Technology Innovation—was es- tablished in

  20. Small Business Innovation Research (SBIR) and Small Business...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Innovation Research (SBIR) and Small Business Technology Transfer (STTR) Small Business Innovation Research (SBIR) and Small Business Technology Transfer (STTR) An overview of the...

  1. Virtual Oxygen Sensor for Innovative NOx and PM Emission Control...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Virtual Oxygen Sensor for Innovative NOx and PM Emission Control Technologies Virtual Oxygen Sensor for Innovative NOx and PM Emission Control Technologies A virtual O2 sensor for...

  2. Fuel Station of the Future- Innovative Approach to Fuel Cell...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Station of the Future- Innovative Approach to Fuel Cell Technology Unveiled in California Fuel Station of the Future- Innovative Approach to Fuel Cell Technology Unveiled in...

  3. USDOE Innovative Clean Coal Technology Demonstration Project: Passamaquoddy Technology Recovery Scrubber{trademark}. Final report: Volume 1

    SciTech Connect (OSTI)

    Not Available

    1994-02-01T23:59:59.000Z

    This Final Report provides available design, operational, and maintenance information, and marketing plans, on the Passamaquoddy Technology Recovery Scrubber{trademark} demonstration Project at the Dragon Products company`s cement plant at Thomaston, Maine. In addition, data on pollutant removal efficiencies and system economics are reviewed. The Recovery Scrubber was developed to simultaneously address the emission of acid gas pollutants and the disposal of alkaline solid waste at a cement plant. The process, however, has general application to other combustion processes including waste or fossil fuel fired boilers. Selected chemistry of the exhaust gas, (before and after treatment by the Recovery Scrubber), selected chemistry of the cement plant kiln baghouse dust catch (before and after treatment by the Recovery Scrubber), and Dragon cement plant economics are presented. current marketing efforts and potential markets for the Recovery Scrubber in several industries are discussed.

  4. Design Optimization of Innovative High-Level Waste Pipeline Unplugging Technologies - 13341

    SciTech Connect (OSTI)

    Pribanic, T.; Awwad, A.; Varona, J.; McDaniel, D.; Gokaltun, S.; Crespo, J. [Applied Research Center, Florida International University, 10555 West Flagler Street, Suite 2100, Miami. FL 33174 (United States)] [Applied Research Center, Florida International University, 10555 West Flagler Street, Suite 2100, Miami. FL 33174 (United States)

    2013-07-01T23:59:59.000Z

    Florida International University (FIU) is currently working on the development and optimization of two innovative pipeline unplugging methods: the asynchronous pulsing system (APS) and the peristaltic crawler system (PCS). Experiments were conducted on the APS to determine how air in the pipeline influences the system's performance as well as determine the effectiveness of air mitigation techniques in a pipeline. The results obtained during the experimental phase of the project, including data from pipeline pressure pulse tests along with air bubble compression tests are presented. Single-cycle pulse amplification caused by a fast-acting cylinder piston pump in 21.8, 30.5, and 43.6 m pipelines were evaluated. Experiments were conducted on fully flooded pipelines as well as pipelines that contained various amounts of air to evaluate the system's performance when air is present in the pipeline. Also presented are details of the improvements implemented to the third generation crawler system (PCS). The improvements include the redesign of the rims of the unit to accommodate a camera system that provides visual feedback of the conditions inside the pipeline. Visual feedback allows the crawler to be used as a pipeline unplugging and inspection tool. Tests conducted previously demonstrated a significant reduction of the crawler speed with increasing length of tether. Current improvements include the positioning of a pneumatic valve manifold system that is located in close proximity to the crawler, rendering tether length independent of crawler speed. Additional improvements to increase the crawler's speed were also investigated and presented. Descriptions of the test beds, which were designed to emulate possible scenarios present on the Department of Energy (DOE) pipelines, are presented. Finally, conclusions and recommendations for the systems are provided. (authors)

  5. EC MoDeRn Project: In-situ Demonstration of Innovative Monitoring Technologies for Geological Disposal - 12053

    SciTech Connect (OSTI)

    Breen, B.J. [NDA, Herdus House, Westlakes Science and Technology Park, Moor Row, Cumbria, CA24 3HU (United Kingdom); Garcia-Sineriz, J.L. [AITEMIN, c/Margarita Salas 14-Parque Leganes Tecnologico-Leganes, ES-28918, Madrid (Spain); Maurer, H. [ETH Zurich, ETH Honggerberg, CH-8093, Zurich (Switzerland); Mayer, S. [ANDRA, 1-7 rue Jean-Monnet, F-92298 Chatenay-Malabry cedex (France); Schroeder, T.J. [NRG, P.O. Box 25, NL-1755 ZG Petten (Netherlands); Verstricht, J. [EURIDICE EIG, c/o SCK.CEN, Boeretang 200, BE-2400 Mol (Belgium)

    2012-07-01T23:59:59.000Z

    Monitoring to provide information on the evolution of geological disposal presents several challenges. The 4-year, euros M 5, EC MoDeRn Project (http://www.modern-fp7.eu/), which commenced in 2009, addresses monitoring processes, state-of-the-art technology and innovative research and development of monitoring techniques. This paper discusses some of the key drivers for the development of innovative monitoring techniques and provides outlines of the demonstration programmes being conducted within MoDeRn. The aim is to develop these innovative monitoring techniques and to demonstrate them under realistic conditions present in underground laboratories. These demonstration projects, applying a range of different monitoring techniques, are being carried out at underground research facilities in different geological environments at HADES URL in Belgium (plastic clay), Bure in France (indurated clay) and at Grimsel Test Site (granite) in Switzerland. These are either built upon existing infrastructure (EC ESDRED Low pH shotcrete and TEM experiments at Grimsel; and PRACLAY experiment and underground galleries in HADES) or will be attached to infrastructure that is being developed and financed by resources outside of this project (mock-up disposal cell in Bure). At Grimsel Test Site, cross-hole and hole-to-tunnel seismic methods are being employed as a means to monitor induced changes in an artificially saturated bentonite wall confined behind a shotcrete plug. Recognising the limitations for travel-time tomography for monitoring a disposal cell, full waveform inversion techniques are being employed to enhance the capacity to monitor remote from the excavation. At the same Grimsel location, an investigation will be conducted of the potential for using a high frequency wireless (HFW) sensor network embedded within the barrier system; this will include the possibility of providing energy remotely to isolated sensors. At the HADES URL, the monitoring programme will utilise the PRACLAY gallery equipped to simulate a disposal gallery for heat-generating high-level waste evaluating fibre-optic based sensing techniques, including distributed sensing for thermal distribution and long-term reliability in harsh conditions. It also includes the potential to improve the treatment of signals from micro-seismic monitoring to enable enhanced understanding of the evolution around the gallery following its excavation due to ventilation, saturation and heating, and to image a water-bearing concretion layer. HADES URL will also be used to test wireless techniques to transmit monitoring data from the underground to the surface. The main focus of this contribution is to evaluate magneto-inductive data transmission; and to optimise energy usage. At the Bure underground facility in France, monitoring systems have been developed and will be embedded into the steel liner for the mock-up high-level waste disposal tunnel. The aim of this programme is to establish the capacity to conduct integrated monitoring activities inside the disposal cell, on the cell liner and in the near-field and to assess the capability of the monitoring to withstand construction and liner emplacement procedures. These projects, which are supported by focused development and testing of the monitoring systems, will allow the testing of both the effectiveness of these techniques applied to disposal situations and to understand the limits of these monitoring technologies. This approach should also enhance the confidence of key stakeholders in the ability to understand/confirm the changes occurring within a disposal cell. In addition, remote or 'non-intrusive' monitoring technologies are evaluated to provide a means of enhancing understanding of what is occurring in an isolated disposal cell. The projects also test solutions for embedded monitoring systems in challenging (risk of damage) situations. The outputs from this work will lead to improved understanding of these state-of-the-art techniques and allow focused development of those techniques beneficial to future monitoring progr

  6. Six More Weeks to File Loan Guarantee Application

    Broader source: Energy.gov [DOE]

    Need more time to submit your application for the DOE renewable energy loan guarantee solicitation? Not to worry – today Secretary Steven Chu announced that the Part I application deadline for the July 2009 energy efficiency, renewable energy and advanced transmission and distribution technologies solicitation has now been extended to October 5, 2010.

  7. Edison Innovation Green Growth Fund (New Jersey)

    Broader source: Energy.gov [DOE]

    The EIGGF offers loans up to $2 million with a performance grant component to support technology companies with Class I renewable energy or energy efficiency products or systems that have achieved ...

  8. Demonstration of Smart Building Controls to Manage Building Peak Loads: Innovative Non-Wires Technologies

    SciTech Connect (OSTI)

    Katipamula, Srinivas; Hatley, Darrel D.

    2004-12-22T23:59:59.000Z

    As a part of the non-wires solutions effort, BPA in partnership with Pacific Northwest National Laboratory (PNNL) is exploring the use of two distributed energy resources (DER) technologies in the City of Richland. In addition to demonstrating the usefulness of the two DER technologies in providing peak demand relief, evaluation of remote direct load control (DLC) is also one of the primary objectives of this demonstration. The concept of DLC, which is used to change the energy use profile during peak hours of the day, is not new. Many utilities have had success in reducing demand at peak times to avoid building new generation. It is not the need for increased generation that is driving the use of direct load control in the Northwest, but the desire to avoid building additional transmission capacity. The peak times at issue total between 50 and 100 hours a year. A transmission solution to the problem would cost tens of millions of dollars . And since a ?non wires? solution is just as effective and yet costs much less, the capital dollars for construction can be used elsewhere on the grid where building new transmission is the only alternative. If by using DLC, the electricity use can be curtailed, shifted to lower use time periods or supplemented through local generation, the existing system can be made more reliable and cost effective.

  9. Innovative pollution prevention program at Air Force owned Raytheon operated facility incorporating Russian technology

    SciTech Connect (OSTI)

    Stallings, J.H.; Cepeda-Calderon, S.

    1999-07-01T23:59:59.000Z

    Air Force Plant 44 in Tucson, Arizona is owned by the Air Force and operated by Raytheon Missile Systems Company. A joint Air Force/Raytheon Pollution Prevention Team operates at AFP 44 with the ultimate goal to minimize or eliminate the use of hazardous substances. The team works together to uncover new technologies and methods that will replace chemicals used in the plant's missile manufacturing facilities. The program maximizes pollution prevention by first eliminating hazardous material use, then chemical recycling, next hazardous waste reduction and finally wastewater treatment and recycling. From fiscal years 1994 through 1997, nine pollution prevention projects have been implemented, totaling $2.6 million, with a payback averaging less than two years. A unique wastewater treatment method has been demonstrated as part of this program. This is electroflotation, a Russian technology which removes dispersed particles from liquid with gas bubbles obtained during water electrolysis. A unit was built in the US which successfully removed organic emulsions from wastewater. Operational units are planned for the removal of waste from waterfall paint booths. The pollution prevention joint team continues to be very active with two projects underway in FY 98 and two more funded for FY 99.

  10. Innovative financing survey: Final report

    SciTech Connect (OSTI)

    Garrison, R.L.

    1986-06-06T23:59:59.000Z

    This report represents the current knowledge and utilization of Innovative Financing techniques of Weatherization Assistance Program (WAP) subgrantees, a sample of Institutional Conservation Program (ICP) grantees, Public Service Commissions (PSC) and selected utilities broadly distributed in the country. The survey inquired essentially about their organizational use and familiarity with the following innovative financing methods: Direct Loan, Loan Interest Reduction, Lease, Lease Purchase, Shared Savings, Energy Service Contracts, Conservation Incentives and Guaranteed Cash Flow. Whatever their characteristics, urban or rural, schools or hospitals, gas and electric utilities of differing ownership types, large or small states, respondents indicated a marginal awareness and utilization of the eight major financing methods. Even though their awareness and use is uneven with respect to their characteristics, certain trends emerge which display an overall lack of application of most of these financing techniques to enhance the program use of grant funds.

  11. Linked Deposit Loan Program (Kentucky)

    Broader source: Energy.gov [DOE]

    The Linked Deposit Program provides loan financing for small businesses of up to $100,000 for up to 7 years. The State Investment Commission invests funds from the state's Abandoned Property Cash...

  12. Grow Missouri Loan Fund (Missouri)

    Broader source: Energy.gov [DOE]

    The Grow Missouri Loan Fund is open to private companies with fewer than 500 existing employees. One of the key advantages of the program is that the funding can be used as a prior commitment for...

  13. Energy Efficient Schools Initiative- Loans

    Broader source: Energy.gov [DOE]

    '''''Applications are now being considered on a case-by-case basis. School districts interested in applying for loans should contact Ron Graham, Executive Director of the Energy Efficient Schools...

  14. Energy Loan Fund for Schools

    Broader source: Energy.gov [DOE]

    The Oklahoma Department of Commerce has established a loan/lease fund for public and non-profit K-12 schools to improve energy efficiency. Two categories of funding are available for schools to...

  15. Economic Development Loan Fund (Virginia)

    Broader source: Energy.gov [DOE]

    The Economic Development Loan Fund helps to fill the financing gap between private debt financing and private equity. Up to $1 million is available for each project and can be used for the...

  16. Mass Save- HEAT Loan Program

    Broader source: Energy.gov [DOE]

    Note: For a limited time, expanded HEAT loan offerings are available. These are being funded by a $3.8 million grant from the U.S. Department of Energy.

  17. EWEB- Energy Management Services Loan

    Broader source: Energy.gov [DOE]

    The Eugene Water & Electric Board (EWEB) offers cash incentives and low interest loans to businesses as part of the Energy Management Services program for the installation of solar domestic,...

  18. Integrating Safety with Science,Technology and Innovation at Los Alamos National Laboratory

    SciTech Connect (OSTI)

    Rich, Bethany M [Los Alamos National Laboratory

    2012-04-02T23:59:59.000Z

    The mission of Los Alamos National Laboratory (LANL) is to develop and apply science, technology and engineering solutions to ensure the safety, security, and reliability of the U.S. nuclear deterrent; reduce global threats; and solve emerging national security challenges. The most important responsibility is to direct and conduct efforts to meet the mission with an emphasis on safety, security, and quality. In this article, LANL Environmental, Safety, and Health (ESH) trainers discuss how their application and use of a kinetic learning module (learn by doing) with a unique fall arrest system is helping to address one the most common industrial safety challenges: slips and falls. A unique integration of Human Performance Improvement (HPI), Behavior Based Safety (BBS) and elements of the Voluntary Protection Program (VPP) combined with an interactive simulator experience is being used to address slip and fall events at Los Alamos.

  19. Nochar Petrobond{reg_sign} Absorbent Polymer Tritiated Oil Solidification. Innovative Technology Summary Report

    SciTech Connect (OSTI)

    None

    2001-09-01T23:59:59.000Z

    NOCHAR is a high technology polymer solidifying agent that can provide a simple and effective disposal method for tritiated oil. The NOCHAR agent will absorb oil with no mixing or required mixing equipment, and with a combination or 'formula' of high tech polymers can be specifically designed to address the characteristics of waste oil as it exists at a given site. The NOCHAR Petro Bond product can be effectively used for free liquid control in storage, transport, and disposal of radioactive and RCRA defined waste oils. Petro Bond Polymer Crystals are non-toxic, non-biodegradable and incinerable to less than 0.02% ash with an absorbent capacity of up to 15:1 (oil to solidification agent ratio by weight).

  20. Pipe inspection using the BTX-II. Innovative technology summary report

    SciTech Connect (OSTI)

    NONE

    1999-05-01T23:59:59.000Z

    The US Department of Energy (DOE) continually seeks safer and more cost-effective remediation technologies for use in the decontamination and decommissioning (D and D) of nuclear facilities. In several of the buildings at the Fernald Site, there is piping that was used to transport process materials. As the demolition of these buildings occur, disposal of this piping has become a costly issue. Currently, all process piping is cut into ten-foot or less sections, the ends of the piping are wrapped and taped to prevent the release of any potential contaminants into the air, and the piping is placed in roll off boxes for eventual repackaging and shipment to the Nevada Test Site (NTS) for disposal. Alternatives that allow for the onsite disposal of process piping are greatly desired due to the potential for dramatic savings in current offsite disposal costs. No means is currently employed to allow for the adequate inspection of the interior of piping, and consequently, process piping has been assumed to be internally contaminated and thus routinely disposed of at NTS. The BTX-II system incorporates a high-resolution micro color camera with lightheads, cabling, a monitor, and a video recorder. The complete probe is capable of inspecting pipes with an internal diameter (ID) as small as 1.4 inches. By using readily interchangeable lightheads, the same system is capable of inspecting piping up to 24 inches in ID. The original development of the BTX system was for inspection of boiler tubes and small diameter pipes for build-up, pitting, and corrosion. However, the system is well suited for inspecting the interior of most types of piping and other small, confined areas. The report describes the technology, its performance, uses, cost, regulatory and policy issues, and lessons learned.

  1. Overview and Analysis of the Japanese and US Innovation SystemsUS Innovation Systems

    E-Print Network [OSTI]

    Innovation System (NIS or National System of Innovation) as the flow of technology and information among theory, innovation and technology d l t lt f l t f l ti hi t idevelopment are results of a complex set based on "IT substitution for manufacturing technology"Former innovation system based on IT substitution

  2. Corporate Venture Capital (CVC) Seeking Innovation and

    E-Print Network [OSTI]

    , Technology Innovation Program, National Institute of Standards and Technology #12;Corporate Venture Capital, Deputy Director Technology Innovation Program Marc G. Stanley, Director #12;ii Acknowledgments T his policymakers in the role of corporate venture capital (CVC) in technology innovation. The research included

  3. 24 BONEZone Spring 2007 Innovation enables organizations to effectively compete

    E-Print Network [OSTI]

    Kusiak, Andrew

    . Some use the terms "technology-based innovation" or "technological innovation" to emphasize the role of technology. Innovation Level The level of innovation varies from incremental to radical. Incremental24 BONEZone · Spring 2007 Innovation enables organizations to effectively compete (Christensen 1997

  4. Design Improvements and Analysis of Innovative High-Level Waste Pipeline Unplugging Technologies - 12171

    SciTech Connect (OSTI)

    Pribanic, Tomas; Awwad, Amer; Crespo, Jairo; McDaniel, Dwayne; Varona, Jose; Gokaltun, Seckin; Roelant, David [Florida International University, Miami, Florida (United States)

    2012-07-01T23:59:59.000Z

    Transferring high-level waste (HLW) between storage tanks or to treatment facilities is a common practice performed at the Department of Energy (DoE) sites. Changes in the chemical and/or physical properties of the HLW slurry during the transfer process may lead to the formation of blockages inside the pipelines resulting in schedule delays and increased costs. To improve DoE's capabilities in the event of a pipeline plugging incident, FIU has continued to develop two novel unplugging technologies: an asynchronous pulsing system and a peristaltic crawler. The asynchronous pulsing system uses a hydraulic pulse generator to create pressure disturbances at two opposite inlet locations of the pipeline to dislodge blockages by attacking the plug from both sides remotely. The peristaltic crawler is a pneumatic/hydraulic operated crawler that propels itself by a sequence of pressurization/depressurization of cavities (inner tubes). The crawler includes a frontal attachment that has a hydraulically powered unplugging tool. In this paper, details of the asynchronous pulsing system's ability to unplug a pipeline on a small-scale test-bed and results from the experimental testing of the second generation peristaltic crawler are provided. The paper concludes with future improvements for the third generation crawler and a recommended path forward for the asynchronous pulsing testing. (authors)

  5. "Diffusion of Innovation: Solar Oven Use in Lesotho (Africa)." Grundy, William and Roy Grundy. Advances in Solar Cooking: Proceedings of the 2nd International Conference on Solar Cooker Use and Technology. Shyam S. Nandwani, ed. July 12-15, 1994.

    E-Print Network [OSTI]

    Noble, William Stafford

    "Diffusion of Innovation: Solar Oven Use in Lesotho (Africa)." Grundy, William and Roy Grundy. Advances in Solar Cooking: Proceedings of the 2nd International Conference on Solar Cooker Use and Technology. Shyam S. Nandwani, ed. July 12-15, 1994. pp. 240-247. 1 DIFFUSION OF INNOVATION: SOLAR OVEN USE

  6. Innovative Water Management Technology to Reduce Environment Impacts of Produced Water

    SciTech Connect (OSTI)

    Castle, James; Rodgers, John; Alley, Bethany; Coffey, Ruthanne; Jurinko, Kristen; Pardue, Michael; Ritter, Tina; Spacil, Michael

    2013-05-15T23:59:59.000Z

    Clemson University with Chevron as an industry partner developed and applied treatment technology using constructed wetland systems to decrease targeted constituents in simulated and actual produced waters to achieve reuse criteria and discharge limits. Pilot-scale and demonstration constructed wetland treatment system (CWTS) experiments led to design strategies for treating a variety of constituents of concern (COCs) in produced waters including divalent metals, metalloids, oil and grease, and ammonia. Targeted biogeochemical pathways for treatment of COCs in pilot-scale CWTS experiments included divalent metal sulfide precipitation through dissimilatory sulfate reduction, metal precipitation through oxidation, reduction of selenite to insoluble elemental selenium, aerobic biodegradation of oil, nitrification of ammonia to nitrate, denitrification of nitrate to nitrogen gas, separation of oil using an oilwater separator, and sorption of ammonia to zeolite. Treatment performance results indicated that CWTSs can be designed and built to promote specific environmental and geochemical conditions in order for targeted biogeochemical pathways to operate. The demonstration system successfully achieved consistent removal extents even while inflow concentrations of COCs in the produced water differed by orders of magnitude. Design strategies used in the pilot-scale and demonstration CWTSs to promote specific conditions that can be applied to designing full-scale CWTSs include plant and soil selection, water-depth selection, addition of amendments, and hydraulic retention time (HRT). These strategies allow conditions within a CWTS to be modified to achieve ranges necessary for the preferred biogeochemical treatment pathways. In the case of renovating a produced water containing COCs that require different biogeochemical pathways for treatment, a CWTS can be designed with sequential cells that promote different conditions. For example, the pilot-scale CWTS for post-reverse osmosis produced water was designed to promote oxidizing conditions within the first wetland cell for nitrification of ammonia, and the subsequent three cells were designed to promote reducing conditions for denitrification of nitrate. By incorporating multiple wetland cells in a CWTS, the conditions within each cell can be modified for removal of specific COCs. In addition, a CWTS designed with multiple cells allows for convenient sample collection points so that biogeochemical conditions of individual cells can be monitored and performance evaluated. Removal rate coefficients determined from the pilot-scale CWTS experiments and confirmed by the demonstration system can be used to calculate HRTs required to treat COCs in full-scale CWTSs. The calculated HRTs can then be used to determine the surface area or ?footprint? of a full-size CWTS for a given inflow rate of produced water.

  7. Innovative Water Management Technology to Reduce Environmental Impacts of Produced Water

    SciTech Connect (OSTI)

    Castle, James; Rodgers, John; Alley, Bethany; Beebe, Alex; Coffey, Ruthanne; Jurinko, Kristen; Pardue, Michael; Ritter, Tina; Spacil, Michael

    2013-05-15T23:59:59.000Z

    Clemson University with Chevron as an industry partner developed and applied treatment technology using constructed wetland systems to decrease targeted constituents in simulated and actual produced waters to achieve reuse criteria and discharge limits. Pilot-scale and demonstration constructed wetland treatment system (CWTS) experiments led to design strategies for treating a variety of constituents of concern (COCs) in produced waters including divalent metals, metalloids, oil and grease, and ammonia. Targeted biogeochemical pathways for treatment of COCs in pilot-scale CWTS experiments included divalent metal sulfide precipitation through dissimilatory sulfate reduction, metal precipitation through oxidation, reduction of selenite to insoluble elemental selenium, aerobic biodegradation of oil, nitrification of ammonia to nitrate, denitrification of nitrate to nitrogen gas, separation of oil using an oilwater separator, and sorption of ammonia to zeolite. Treatment performance results indicated that CWTSs can be designed and built to promote specific environmental and geochemical conditions in order for targeted biogeochemical pathways to operate. The demonstration system successfully achieved consistent removal extents even while inflow concentrations of COCs in the produced water differed by orders of magnitude. Design strategies used in the pilot-scale and demonstration CWTSs to promote specific conditions that can be applied to designing full-scale CWTSs include plant and soil selection, water-depth selection, addition of amendments, and hydraulic retention time (HRT). These strategies allow conditions within a CWTS to be modified to achieve ranges necessary for the preferred biogeochemical treatment pathways. In the case of renovating a produced water containing COCs that require different biogeochemical pathways for treatment, a CWTS can be designed with sequential cells that promote different conditions. For example, the pilot-scale CWTS for post-reverse osmosis produced water was designed to promote oxidizing conditions within the first wetland cell for nitrification of ammonia, and the subsequent three cells were designed to promote reducing conditions for denitrification of nitrate. By incorporating multiple wetland cells in a CWTS, the conditions within each cell can be modified for removal of specific COCs. In addition, a CWTS designed with multiple cells allows for convenient sample collection points so that biogeochemical conditions of individual cells can be monitored and performance evaluated. Removal rate coefficients determined from the pilot-scale CWTS experiments and confirmed by the demonstration system can be used to calculate HRTs required to treat COCs in full-scale CWTSs. The calculated HRTs can then be used to determine the surface area or ?footprint? of a full-size CWTS for a given inflow rate of produced water.

  8. Energy Saving Melting and Revert Reduction Technology: Innovative Semi-Solid Metal (SSM) Processing

    SciTech Connect (OSTI)

    Diran Apelian

    2012-08-15T23:59:59.000Z

    Semi-solid metal (SSM) processing has emerged as an attractive method for near-net-shape manufacturing due to the distinct advantages it holds over conventional near-net-shape forming technologies. These advantages include lower cycle time, increased die life, reduced porosity, reduced solidification shrinkage, improved mechanical properties, etc. SSM processing techniques can not only produce the complex dimensional details (e.g. thin-walled sections) associated with conventional high-pressure die castings, but also can produce high integrity castings currently attainable only with squeeze and low-pressure permanent mold casting processes. There are two primary semi-solid processing routes, (a) thixocasting and (b) rheocasting. In the thixocasting route, one starts from a non-dendritic solid precursor material that is specially prepared by a primary aluminum manufacturer, using continuous casting methods. Upon reheating this material into the mushy (a.k.a. "two-phase") zone, a thixotropic slurry is formed, which becomes the feed for the casting operation. In the rheocasting route (a.k.a. "slurry-on-demand" or "SoD"), one starts from the liquid state, and the thixotropic slurry is formed directly from the melt via careful thermal management of the system; the slurry is subsequently fed into the die cavity. Of these two routes, rheocasting is favored in that there is no premium added to the billet cost, and the scrap recycling issues are alleviated. The CRP (Trade Marked) is a process where the molten metal flows through a reactor prior to casting. The role of the reactor is to ensure that copious nucleation takes place and that the nuclei are well distributed throughout the system prior to entering the casting cavity. The CRP (Trade Marked) has been successfully applied in hyper-eutectic Al-Si alloys (i.e., 390 alloy) where two liquids of equal or different compositions and temperatures are mixed in the reactor and creating a SSM slurry. The process has been mostly used for hypo-eutectic Al-Si alloys (i.e., 356, 357, etc.) where a single melt passes through the reactor. In addition, the CRP (Trade Marked) was designed to be flexible for thixocasting or rheocasting applications as well as batch or continuous casting. Variable heat extraction rates can be obtained by controlling either the superheat of the melt, the temperature of the channel system, or the temperature of the reactor. This program had four main objectives all of which were focused on a mechanistic understanding of the process in order to be able to scale it up, to develop it into a robust process,and for SSM processing to be commercially used.

  9. INNOVATION IN EDUCATION AWARDS Request for Proposals 2015

    E-Print Network [OSTI]

    Sibille, Etienne

    innovative approaches that utilize proven or emerging technologies. Examples of these technology#12;INNOVATION IN EDUCATION AWARDS Request for Proposals 2015 Submission Deadline: Monday, January different departments, units, and campuses on the development of innovative approaches to teaching Develop

  10. A Critical Analysis of Technological Innovation and Economic Development in Southern California's Urban Water Reuse And Recycling Industry

    E-Print Network [OSTI]

    Pilip-Florea, Shadrach Jay

    2012-01-01T23:59:59.000Z

    Richardson, Mark 2009. Siemens Water Technologies Company2011. www. 3news.co.nz Siemens Water Technologies, 2012.conglomerations, US Filter, now Siemens Water Technologies

  11. Oklahoma City- Residential Energy Efficiency Loan Program

    Broader source: Energy.gov [DOE]

    Beginning in 2010, homeowners in Oklahoma City are eligible for energy efficiency loans up to $10,000. Residents must have an annual income of $100,000 or less and must repay the loan within 36...

  12. West Virginia Loan Insurance Program (West Virginia)

    Broader source: Energy.gov [DOE]

    The West Virginia Loan Insurance Program, provides a loan insurance program in cooperation with third party lenders to assist firms that cannot obtain conventional bank financing. Up to 80% of the...

  13. Linked Deposit Loan Program (West Virginia)

    Broader source: Energy.gov [DOE]

    The Linked Deposit Loan Program is targeted at small, private firms with 50 or fewer employees and gross annual revenues of $5 million or less comes. This loan offered through the West Virginia...

  14. West Virginia Direct Loan Program (West Virginia)

    Broader source: Energy.gov [DOE]

    The West Virginia Direct Loan Program, provides up to 45 percent in financing fixed assets through low-interest, direct loans to businesses expanding or locating in West Virginia. Proceeds from the...

  15. Sustainable Energy Utility (SEU)- Agricultural Loan Program

    Broader source: Energy.gov [DOE]

    Delaware Sustainable Energy Utility (DESEU) offers customized loans for agricultural customer as a part of DESEU’s revolving loan program. Program applications are accepted on a rolling basis, and...

  16. Business Development Loan Program (North Dakota)

    Broader source: Energy.gov [DOE]

    The Business Development Loan Program assists new and existing businesses in obtaining loans that would have a higher degree of risk than would normally be acceptable to a lending institution. ...

  17. Animal Waste Treatment System Loan Program (Missouri)

    Broader source: Energy.gov [DOE]

    The purpose of the Animal Waste Treatment System Loan Program is to finance animal waste treatment systems for independent livestock and poultry producers at below conventional interest rates. Loan...

  18. Ashland Electric Utility- Commercial Conservation Loan Program

    Broader source: Energy.gov [DOE]

    City of Ashland Conservation District has no-interest loans to help commercial customers finance energy efficiency improvements in facilities. The loans can be used for lighting retrofits, water...

  19. Regional Revolving Loan Trust Fund (New York)

    Broader source: Energy.gov [DOE]

    The Regional Revolving Loan Trust Fund Program, coordinated by the Empire State Development program, is operated in six regions by nonprofit organizations and provides working capital loans (up to ...

  20. Lumbee River EMC- Residential Weatherization Loan Program

    Broader source: Energy.gov [DOE]

    Lumbee River Electric Membership Corporation (LREMC) offers low interest loans to help its residential members increase the energy efficiency of their homes. Loans up to $10,000 are available for...

  1. Energy Revolving Loan Fund- Passive Solar

    Broader source: Energy.gov [DOE]

    In January 2010, Michigan enacted the Public Act 242 of 2009, which established the Energy Efficiency and Renewable Energy Revolving Loan Fund Program. The Passive Solar Systems portion of the loan...

  2. Main Street Loan Program (North Dakota)

    Broader source: Energy.gov [DOE]

    The Main Street Loan Program loans of up to $24,999 through the Certified Development Corporation (CDC) in participation with local lenders or economic development organizations for small...

  3. Grays Harbor PUD- Solar Water Heater Loan

    Broader source: Energy.gov [DOE]

    Since October 2001, Grays Harbor PUD has offered a low-interest loan program (currently 4.0%) for the installation of solar water heaters. Loans are available for the installation of solar...

  4. LoanSTAR Revolving Loan Program | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport(FactDepartment ofLetterEconomy andTerms Loan Terms The following terms areLoanSTAR

  5. Mr. and Mrs. Carl Emergency Loan

    E-Print Network [OSTI]

    Gelfond, Michael

    Mr. and Mrs. Carl H. Gelin Emergency Loan Fund The Mr. and Mrs. Carl H. Gelin Emergency Loan Fund was endowed in 1998 by the estate of the late Mr. Carl H. Gelin. Mr. Gelin studied Engineering at Texas Tech and loan company. During their lifetime, Mr. and Mrs. Gelin were members of the Texas Tech Ex

  6. Total football in innovation policy Discussion paper on the evaluation of innovation policy

    E-Print Network [OSTI]

    innovation policy can be derived. Effective innovation policy addresses the issues within the technology1 Total football in innovation policy Discussion paper on the evaluation of innovation policy Koen Schoots, Bert Daniëls, Rodrigo Rivera ECN Policy Studies The innovation climate in the Netherlands

  7. Building Technologies Office Window and Envelope Technologies...

    Energy Savers [EERE]

    by 2000 (10.7 billion in current dollars) Source: American Energy Innovation Council Case Studies on the Government's Role in Energy Technology Innovation "Low-Emissivity...

  8. National Science Foundation and National Institute of Standards and Technology Roles and Influences on STI Policymaking

    E-Print Network [OSTI]

    FEALING, Kaye H.

    2013-01-01T23:59:59.000Z

    STUDY OF INNOVATION AND TECHNOLOGY IN CHINA POLICY BRIEF STIThe Study of Innovation and Technology in China (SITC) is aon science, technology, and innovation (STI) policy

  9. China’s Defense Technology and Industrial Base in a Regional Context

    E-Print Network [OSTI]

    Bitzinger, Richard A

    2010-01-01T23:59:59.000Z

    The Study of Innovation and Technology in China (SITC) is aindustries, in terms of technology innovation these regionalregion, in terms of technology innovation, continues to run

  10. Innovative technology summary report.

    SciTech Connect (OSTI)

    NONE

    2006-05-09T23:59:59.000Z

    Traditional site characterization methods rely on preplanned sampling programs and off-site analysis of samples to determine the extent and level of hazardous waste contamination. This process is costly and time-consuming. Static work plans specify the numbers and locations of samples to be collected, as well as the analyses to be performed on collected samples. Sampling crews are mobilized, samples are collected, and the crews are demobilized before final results become available. Additional sampling programs are often required to resolve uncertainties raised by the initial sampling and analysis results. The drawbacks of a traditional approach to sampling program design and execution are high costs per sample, pressure to over sample while at the site, and inevitable surprises in the analytical results that require additional sampling to resolve. A key step in the characterization of hazardous wastes at U.S. Department of Energy (DOE) sites is determination of the extent of contamination. The proper number and placement of sampling locations is required to both minimize characterization costs and guarantee that contamination extent can be estimated with reasonable confidence. Because ''soft'' information (i.e., historical records, computer modeling results, past experience, etc.) for a site are usually just as important as ''hard'' laboratory results, the approach taken must include a quantitative way of accounting for both hard and soft site data. An alternative to traditional sampling programs is Adaptive Sampling and Analysis Programs (ASAPs). ASAPs rely on field analytical methods to generate sample results quickly enough to have an impact on the course of the sampling program. Rather than a static work plan, ASAPs are based on dynamic work plans that specify the logic for how sampling numbers, locations, and analyses will be determined as the program proceeds. To ensure that the sampling stays on track, ASAPs also rely on rapid, field-level decision making. ASAPs require (1) field analytical methods that are appropriate for the types of expected contaminants and media present at the site, and (2) a way of supporting decision making in the field that is appropriate for the goals of the program.

  11. Long Term Innovative Technologies

    Broader source: Energy.gov (indexed) [DOE]

    the Department of Energy's goals of reducing greenhouse gas emissions, petroleum use, and air pollution, and building a more diverse, secure, and efficient energy infrastructure....

  12. Technology & Innovation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over Our InstagramStructureProposedPAGESafety Tag:8,, 20153 To.T.Energy

  13. The Third Wave: Innovation and Strategic Military Capacity in the Future

    E-Print Network [OSTI]

    COWHEY, Peter

    2013-01-01T23:59:59.000Z

    The Study of Innovation and Technology in China (SITC) is aFostering U.S. Growth,” Innovations: Technology, Governance,many inputs into technology innovation. However, it is not

  14. The Chinese Defense Economy’s Long March from Imitation to Innovation

    E-Print Network [OSTI]

    Cheung, Tai Ming

    2010-01-01T23:59:59.000Z

    on the Study of Innovation and Technology in China (SITC),The Study of Innovation and Technology in China (SITC) is as defense science, technology, and innovation (DSTI) system

  15. Innovation in China’s Defense Research, Development, and Acquisition System

    E-Print Network [OSTI]

    CHEUNG, Tai Ming

    2011-01-01T23:59:59.000Z

    on the Study of Innovation and Technology in China, whichThe Study of Innovation and Technology in China (SITC) is aInnovation came overwhelmingly from foreign technology and

  16. Energy Department Awards More Than $7 Million for Innovative...

    Office of Environmental Management (EM)

    More Than 7 Million for Innovative Hydrogen Storage Technologies in Fuel Cell Electric Vehicles Energy Department Awards More Than 7 Million for Innovative Hydrogen Storage...

  17. ‘Back to the drawing board!’ Can failed technological innovations for sustainability play a role in socio-technical transitions? The case of Combined Heat and Power and District Heating in Edinburgh. 

    E-Print Network [OSTI]

    Scott-Mearns, Naomi

    2014-01-01T23:59:59.000Z

    This dissertation regards Combined Heat and Power (CHP) and District Heating (DH) technology (CHP-DH) as a technological innovation for sustainability which is currently under-utilized in the UK as DH meets less than 2% of heat demand (Delta Energy...

  18. Solar Innovator | Alta Devices

    ScienceCinema (OSTI)

    Mattos, Laila; Le, Minh

    2013-05-29T23:59:59.000Z

    Selected to participate in the Energy Department's SunShot Initiative, Alta Devices produces solar cells that convert sunlight into electricity at world record-breaking levels of efficiency. Through its innovative solar technology Alta is helping bring down the cost of solar. Learn more about the Energy Department's efforts to advance solar technology at energy.gov/solar .

  19. Parametric Evaluation of an Innovative Ultra-Violet PhotocatalyticOxidation (UVPCO) Air Cleaning Technology for Indoor Applications

    SciTech Connect (OSTI)

    Hodgson, Alfred T.; Sullivan, Douglas P.; Fisk, William J.

    2005-10-31T23:59:59.000Z

    An innovative Ultra-Violet Photocatalytic Oxidation (UVPCO) air cleaning technology employing a semitransparent catalyst coated on a semitransparent polymer substrate was evaluated to determine its effectiveness for treating mixtures of volatile organic compounds (VOCs) representative of indoor environments at low, indoor-relevant concentration levels. The experimental UVPCO contained four 30 by 30-cm honeycomb monoliths irradiated with nine UVA lamps arranged in three banks. A parametric evaluation of the effects of monolith thickness, air flow rate through the device, UV power, and reactant concentrations in inlet air was conducted for the purpose of suggesting design improvements. The UVPCO was challenged with three mixtures of VOCs. A synthetic office mixture contained 27 VOCs commonly measured in office buildings. A building product mixture was created by combining sources including painted wallboard, composite wood products, carpet systems, and vinyl flooring. The third mixture contained formaldehyde and acetaldehyde. Steady state concentrations were produced in a classroom laboratory or a 20-m{sup 3} chamber. Air was drawn through the UVPCO, and single-pass conversion efficiencies were measured from replicate samples collected upstream and downstream of the reactor. Thirteen experiments were conducted in total. In this UVPCO employing a semitransparent monolith design, an increase in monolith thickness is expected to result in general increases in both reaction efficiencies and absolute reaction rates for VOCs oxidized by photocatalysis. The thickness of individual monolith panels was varied between 1.2 and 5 cm (5 to 20 cm total thickness) in experiments with the office mixture. VOC reaction efficiencies and rates increased with monolith thickness. However, the analysis of the relationship was confounded by high reaction efficiencies in all configurations for a number of compounds. These reaction efficiencies approached or exceeded 90% for alcohols, glycol ethers, and other individual compounds including d-limonene, 1,2,4-trimethylbenzene, and decamethylcyclopentasiloxane. This result implies a reaction efficiency of about 30% per irradiated monolith face, which is in agreement with the maximum efficiency for the system predicted with a simulation model. In these and other experiments, the performance of the system for highly reactive VOCs appeared to be limited by mass transport of reactants to the catalyst surface rather than by photocatalytic activity. Increasing the air flow rate through the UVPCO device decreases the residence time of the air in the monoliths and improves mass transfer to the catalyst surface. The effect of gas velocity was examined in four pairs of experiments in which the air flow rate was varied from approximately 175 m{sup 3}/h to either 300 or 600 m{sup 3}/h. Increased gas velocity caused a decrease in reaction efficiency for nearly all reactive VOCs. For all of the more reactive VOCs, the decrease in performance was less, and often substantially less, than predicted based solely on residence time, again likely due to mass transfer limitations at the low flow rate. The results demonstrate that the UVPCO is capable of achieving high conversion efficiencies for reactive VOCs at air flow rates above the base experimental rate of 175 m{sup 3}/h. The effect of UV power was examined in a series of experiments with the building product mixture in which the number of lamps was varied between nine and three. For the most reactive VOCs in the mixture, the effects of UV power were surprisingly small. Thus, even with only one lamp in each section, there appears to be sufficient photocatalytic activity to decompose most of the mass of reactive VOCs that reach the catalyst surface. For some less reactive VOCs, the trend of decreasing efficiency with decreasing UV intensity was in general agreement with simulation model predictions.

  20. HUD PowerSaver Pilot Loan Program

    SciTech Connect (OSTI)

    Zimring, Mark; Hoffman, Ian

    2010-12-10T23:59:59.000Z

    The U.S. Department of Housing and Urban Development (HUD) recently announced the creation of a pilot loan program for home energy improvements. The PowerSaver loan program is a new, energy-focused variant of the Title I Property Improvement Loan Insurance Program (Title I Program) and is planned for introduction in early 2011. The PowerSaver pilot will provide lender insurance for secured and unsecured loans up to $25,000 to single family homeowners. These loans will specifically target residential energy efficiency and renewable energy improvements. HUD estimates the two-year pilot will fund approximately 24,000 loans worth up to $300 million; the program is not capped. The Federal Housing Administration (FHA), HUD's mortgage insurance unit, will provide up to $25 million in grants as incentives to participating lenders. FHA is seeking lenders in communities with existing programs for promoting residential energy upgrades.

  1. Innovation and the state : development strategies for high technology industries in a world of fragmented production : Israel, Ireland, and Taiwan

    E-Print Network [OSTI]

    Breznitz, Dan

    2005-01-01T23:59:59.000Z

    One of the most unexpected changes of the 1990s is that firms in a number of emerging economies not previously known for their high-technology industries have leapfrogged to the forefront in new Information Technologies ...

  2. Federal Register: Loan Guarantees for Projects That Employ Innovative

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed offOCHCO2: FinalOffers New Training on Energy6 Federal Energy1999;Federal Register Federal

  3. Innovative Clean Energy Projects - Title XVII Loan Program | Department of

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122Commercial602 1,39732on Armed ServicesDepartmentInformationInitiativesEnergy

  4. Technology-Enabled Nurturing of Creativity and Innovation: A Specific Illustration from an Undergraduate Engineering Physics Course

    E-Print Network [OSTI]

    Kowalski, F V; Kohl, P B; Kuo, V H

    2013-01-01T23:59:59.000Z

    There is general agreement that creativity and innovation are desirable traits in the toolbox of 21\\textsuperscript{st} century engineers, as well as in the future workforce in general. However, there is a dearth of exemplars, pedagogical models, or best practices to be implemented in undergraduate engineering education to develop and nurture those talents. In this paper, we use a specific example of a classroom activity from a course designed to help bridge the transition from learning the fundamental principles of engineering physics in introductory courses to being able to creatively and innovatively apply them in more advanced settings, such as senior capstone projects and on-the-job challenges in the future workplace. Application of techniques for generating and evaluating ideas are described. To enhance the benefits of group creativity and facilitate real-time electronic brainstorming in the classroom, we use InkSurvey with pen-enabled mobile computing devices (iPads, tablet PCs, Android devices, etc.)....

  5. SUPPLEMENT TO LOAN GUARANTEE SOLICITATION ANNOUNCEMENT FEDERAL LOAN GUARANTEES FOR PROJECTS THAT EMPLOY INNOVATIVE ENERGY EFFICIENCY,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOrigin ofEnergy atLLC - FE DKT. 10-160-LNG - ORDERSTATE0-1 CHAPTER1 0-SA-02

  6. Idaho Falls Power- Residential Energy Efficiency Loan Program

    Broader source: Energy.gov [DOE]

    Idaho Falls Power's Energy Efficiency Loan Program offers zero interest loans for qualifying customers to purchase and install efficient electric appliances. The program will loan up to 100% of the...

  7. Georgia Cities Foundation- Green Communities Revolving Loan Fund (Georgia)

    Broader source: Energy.gov [DOE]

    The Green Communities Fund is a revolving loan fund providing low-interest loans to businesses located within the city limits of any city in Georgia. Loans are available for existing as well as new...

  8. NREL Spectrum of Innovation

    ScienceCinema (OSTI)

    None

    2013-05-29T23:59:59.000Z

    There are many voices calling for a future of abundant clean energy. The choices are difficult and the challenges daunting. How will we get there? The National Renewable Energy Laboratory integrates the entire spectrum of innovation including fundamental science, market relevant research, systems integration, testing and validation, commercialization and deployment. The innovation process at NREL is interdependent and iterative. Many scientific breakthroughs begin in our own laboratories, but new ideas and technologies come to NREL at any point along the innovation spectrum to be validated and refined for commercial use.

  9. Queen Anne's County- Clean Energy Loan Program

    Broader source: Energy.gov [DOE]

    A loan program established by Queen Anne's County in order to fund cost effective energy efficiency improvements or install a renewable energy device in eligible homes.

  10. Interested Parties - Multiple Loan Applications per Developer...

    Energy Savers [EERE]

    Documents & Publications Interested Parties - Allowing Multiple Projects per Application for Section 1705 Loan Guarantees Interested Parties - K&L Group Interested Parties - Shipp...

  11. Energy Revolving Loan Fund- Public Entities

    Broader source: Energy.gov [DOE]

    '''''Note: Michigan Economic Development Corporation is not currently accepting applications for this loan fund. Check the program web site for future solicitations. '''''

  12. Idaho Falls Power- Residential Weatherization Loan Program

    Broader source: Energy.gov [DOE]

    Residential customers with permanently installed electric heat who receive service from the City of Idaho Falls, are eligible for 0% weatherization loans. City Energy Service will conduct an...

  13. Guidance Regarding Refinancing, Restructuring, or Modifying Loan...

    Broader source: Energy.gov (indexed) [DOE]

    addresses potential refinancing, restructuring, or modifying of a loan agreement entered into by an energy services company under a federal energy savings performance contract....

  14. Renewable Resource Grant and Loan Program (Montana)

    Broader source: Energy.gov [DOE]

    The renewable resource grant and loan program is administered by the Department of Natural Resources and Conservation. Historically the program primarily has funded water projects, but it does...

  15. Santee Cooper- Renewable Energy Resource Loans

    Broader source: Energy.gov [DOE]

    Santee Cooper offers low-interest loans to residential customers who have a licensed contractor install photovoltaic (PV) systems, wind energy systems, micro-hydropower systems, biomass energy...

  16. Community Service Block Grant Loan Program (Illinois)

    Broader source: Energy.gov [DOE]

    Community Service Block Grant Loan Program is a partnership among the Department of Commerce and Economic Opportunity, community action agencies, and the Illinois Ventures for Community Action. The...

  17. Energy Efficiency Loans for State Government Agencies

    Broader source: Energy.gov [DOE]

    Through the Green Bank of Kentucky, state agencies may be eligible for three separate energy loan products, depending on the proposed energy efficiency improvements.* Prior to applying, all...

  18. Alternative Energy Conservation Loan Fund (Alaska) | Department...

    Broader source: Energy.gov (indexed) [DOE]

    Community, and Economic Development is providing loans to purchase, construct and install alternative energy systems or energy conservation improvements in commercial buildings....

  19. Missouri Agribusiness Revolving Loan Fund (Missouri)

    Broader source: Energy.gov [DOE]

    The Missouri Agricultural and Small Business Development Authority’s (MASBDA) Missouri Agribusiness Revolving Loan Fund offers financing to value-added agriculture enterprises, agriculture support...

  20. Energy Department Finalizes Loan Guarantee for Transformational...

    Office of Environmental Management (EM)

    Transformational Rooftop Solar Project Energy Department Finalizes Loan Guarantee for Transformational Rooftop Solar Project September 30, 2011 - 3:37pm Addthis Washington D.C. -...

  1. Columbia Water & Light- Solar Energy Loans

    Broader source: Energy.gov [DOE]

    Columbia Water & Light (CWL) offers electric residential and commercial customers low-interest loans for photovoltaic (PV) systems and solar water heaters.

  2. Rural Business Energy Efficiency Improvement Loan Program

    Broader source: Energy.gov [DOE]

    The Maryland Agricultural and Resource Based Industry Development Corporation (MARBIDCO) offers low interest loans for energy efficiency improvements to farms and rural businesses through the Rural...

  3. Farm Credit Canada Energy Loan (Canada)

    Broader source: Energy.gov [DOE]

    The Energy Loan helps Canadian producers or agri-business owners considering renewable energy purchase and install on-farm energy sources, such as:

  4. Oklahoma City- Green Home Loan Program

    Broader source: Energy.gov [DOE]

    The loan program is administered through the city's Community Action Agency. Apply by calling the Agency at (405) 232-0199.

  5. Piedmont EMC- Residential Energy Efficiency Loan Program

    Broader source: Energy.gov [DOE]

    Piedmont Electric Membership Corporation's (PEMC) Energy Efficiency and Renewable Energy Loan Program is available to eligible consumers to finance the purchase and installation of energy efficient...

  6. Piedmont EMC- Residential Solar Loan Program

    Broader source: Energy.gov [DOE]

    Piedmont Electric Membership Corporation's (PEMC) Energy Efficiency and Renewable Energy Loan Program is available to eligible consumers to finance the purchase and installation of photovoltaic (PV...

  7. Stearns Electric Association- Energy Efficiency Loan Program

    Broader source: Energy.gov [DOE]

    Stearns Electric Association, through a program offered by Rural Utilities Services, offers its members low-interest Energy Resource Conservation (ERC) loans. The complete cost of making approved...

  8. PowerSaver Loans | Department of Energy

    Energy Savers [EERE]

    This type of loan is for smaller projects such as insulation, air and duct sealing, water heating, and upgrading or replacing heating and cooling equipment. This is an...

  9. Adams Electric Cooperative- Energy Efficiency Loan Program

    Broader source: Energy.gov [DOE]

    Adams Electric Cooperative offers financing to help residential customers increase the energy efficiency of homes through the Energy Resource Conservation (ERC) and Supplemental Loan Program. ...

  10. Experts in Defense: How China’s Academicians Contribute to Its Defense Science and Technology Development

    E-Print Network [OSTI]

    WILSON, Jordan

    2015-01-01T23:59:59.000Z

    STUDY OF INNOVATION AND TECHNOLOGY IN CHINA RESEARCH BRIEFThe Study of Innovation and Technology in China (SITC) is a

  11. Specialist Communities: People and Cultures in China’s Defense Science and Technology System

    E-Print Network [OSTI]

    KROLIKOWSKI, Alanna

    2015-01-01T23:59:59.000Z

    STUDY OF INNOVATION AND TECHNOLOGY IN CHINA RESEARCH BRIEFThe Study of Innovation and Technology in China (SITC) is a

  12. EPACT2005 Loan Guarantee Program (released in AEO2008)

    Reports and Publications (EIA)

    2008-01-01T23:59:59.000Z

    Title XVII of the Energy Policy Act 2005 (EPACT) authorized the Department of Energy (DOE) to issue loan guarantees for projects involving new or improved technologies to avoid, reduce, or sequester greenhouse gases (GHGs). The law specified that the amount of the guarantee would be up to 80% of a project's cost. EPACT2005 also specified that DOE must receive funds equal to the subsidy cost either through the federal appropriations process or from the firm receiving the guarantee. As discussed in Annual Energy Outlook 2007, this program, by lowering borrowing costs, can have a major impact on the economics of capital-intensive technologies.

  13. Preliminary/Sample Residential EE Loan Term Sheet and Underwriting...

    Broader source: Energy.gov (indexed) [DOE]

    sheet for single family residential energy efficiency loans. Author: Energy Efficiency Finance Corp. PreliminarySample Residential Energy Efficiency Loan Term Sheet & Underwriting...

  14. Energy Department Finalizes $150 Million Loan Guarantee to 1366...

    Office of Environmental Management (EM)

    for a Loan Guarantee to Support Breakthrough Solar Manufacturing Process The Reality of Solar Panels at 50% Cost Department of Energy Finalizes 197 Million Loan Guarantee to...

  15. Loan Performance Data and Communication | Department of Energy

    Energy Savers [EERE]

    Performance Data and Communication Loan Performance Data and Communication Better Buildings Residential Network Financing and Revenue Peer Exchange Call: Loan Performance Data and...

  16. Department of Energy Issues Loan Guarantee Supported by Recovery...

    Office of Environmental Management (EM)

    Loan Guarantee Supported by Recovery Act for Nevada Geothermal Project Department of Energy Issues Loan Guarantee Supported by Recovery Act for Nevada Geothermal Project September...

  17. Department of Energy Issues Loan Guarantee Supported by Recovery...

    Energy Savers [EERE]

    Department of Energy Issues Loan Guarantee Supported by Recovery Act for Nevada Geothermal Project Department of Energy Issues Loan Guarantee Supported by Recovery Act for Nevada...

  18. Draft "Michigan Saves" Loan Loss Reserve Fund Agreement

    Broader source: Energy.gov [DOE]

    A sample loan loss reserve agreement between a state or local government and a financial institution setting the terms and conditions of the loan loss reserve fund.

  19. Energy Department Loan Guarantee Would Support Large-Scale Rooftop...

    Broader source: Energy.gov (indexed) [DOE]

    Finalizes Partial Guarantee for 852 Million Loan to Support California Concentrating Solar Power Plant Energy Department Finalizes Loan Guarantee for Transformational Rooftop...

  20. Oklahoma Municipal Power Authority- WISE Energy Efficiency Loan Program

    Broader source: Energy.gov [DOE]

    The Oklahoma Municipal Power Authority (OMPA) offers loans for a variety of measures and equipment through its WISE Loan Program. This program encourages residential and commercial customers to...

  1. DOE Expands, Simplifies Loan Guarantees for Renewable Energy...

    Office of Environmental Management (EM)

    DOE Expands, Simplifies Loan Guarantees for Renewable Energy Projects DOE Expands, Simplifies Loan Guarantees for Renewable Energy Projects October 14, 2009 - 12:39pm Addthis DOE...

  2. Renewable Energy Loan Applications Due Today! | Department of...

    Broader source: Energy.gov (indexed) [DOE]

    Renewable Energy Loan Applications Due Today Renewable Energy Loan Applications Due Today October 5, 2010 - 12:15pm Addthis Ebony Meeks Former Assistant Press Secretary, Office...

  3. Energy Department Finalizes Loan Guarantee for Ormat Geothermal...

    Energy Savers [EERE]

    Loan Guarantee for Ormat Geothermal Project in Nevada Energy Department Finalizes Loan Guarantee for Ormat Geothermal Project in Nevada September 23, 2011 - 3:37pm Addthis...

  4. Energy Department Finalizes $737 Million Loan Guarantee to Tonopah...

    Energy Savers [EERE]

    Finalizes 737 Million Loan Guarantee to Tonopah Solar Energy for Nevada Project Energy Department Finalizes 737 Million Loan Guarantee to Tonopah Solar Energy for Nevada Project...

  5. Department of Energy Offers Conditional Commitment for a Loan...

    Office of Environmental Management (EM)

    Department of Energy Offers Conditional Commitment for a Loan Guarantee to Support World's Largest Wind Project Department of Energy Offers Conditional Commitment for a Loan...

  6. EIS-0429: Department of Energy Loan Guarantee for Indiana Integrated...

    Energy Savers [EERE]

    9: Department of Energy Loan Guarantee for Indiana Integrated Gasification Combined Cycle, Rockport, IN EIS-0429: Department of Energy Loan Guarantee for Indiana Integrated...

  7. EIS-0432: Department of Energy Loan Guarantee for Medicine Bow...

    Energy Savers [EERE]

    2: Department of Energy Loan Guarantee for Medicine Bow Gasification and Liquefaction Coal-to-Liquids, Carbon County, Wyoming EIS-0432: Department of Energy Loan Guarantee for...

  8. EIS-0428: Department of Energy Loan Guarantee for Mississippi...

    Broader source: Energy.gov (indexed) [DOE]

    8: Department of Energy Loan Guarantee for Mississippi Integrated Gasification Combined Cycle, Moss Point, Mississippi EIS-0428: Department of Energy Loan Guarantee for Mississippi...

  9. Dakota Electric Association- Commercial and Industrial Energy Conservation Loan Program

    Broader source: Energy.gov [DOE]

    Dakota Electric provides low-interest loans to help its commercial and industrial customers finance projects which will improve the energy efficiency of participating facilities. The minimum loan...

  10. Department of Energy Announces Two Additional Loans of Oil from...

    Office of Environmental Management (EM)

    Additional Loans of Oil from the Strategic Petroleum Reserve Department of Energy Announces Two Additional Loans of Oil from the Strategic Petroleum Reserve September 2, 2005 -...

  11. Energy Department Announces Emergency Oil Loan In Response to...

    Office of Environmental Management (EM)

    Emergency Oil Loan In Response to Hurricane Isaac-Related Request Energy Department Announces Emergency Oil Loan In Response to Hurricane Isaac-Related Request August 31, 2012 -...

  12. Energy Department Provides Additional Emergency Fuel Loan to...

    Office of Environmental Management (EM)

    Additional Emergency Fuel Loan to Department of Defense as Part of Hurricane Sandy and Nor'easter Recovery Energy Department Provides Additional Emergency Fuel Loan to Department...

  13. Guadalupe Valley Electric Cooperative- Conservation Plan 7 Loan Program

    Broader source: Energy.gov [DOE]

    Guadalupe Valley Electric Cooperative offers an incentive for members to increase the energy efficiency of existing homes and facilities through the Conservation Plan 7 Loan Program. The loan...

  14. Advanced Heat Transfer Technologies Increase Vehicle Performance and Reliability; The Spectrum of Clean Energy Innovation (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2010-06-01T23:59:59.000Z

    Fact sheet describes NREL's work with heat transfer technologies to keep hybrid electric and all-electric vehicle power electronic components cool.

  15. Information technology and innovative drainage management practices for selenium load reduction from irrigated agriculture to provide stakeholder assurances and meet contaminant mass loading policy objectives

    SciTech Connect (OSTI)

    Quinn, N.W.T.

    2009-10-15T23:59:59.000Z

    Many perceive the implementation of environmental regulatory policy, especially concerning non-point source pollution from irrigated agriculture, as being less efficient in the United States than in many other countries. This is partly a result of the stakeholder involvement process but is also a reflection of the inability to make effective use of Environmental Decision Support Systems (EDSS) to facilitate technical information exchange with stakeholders and to provide a forum for innovative ideas for controlling non-point source pollutant loading. This paper describes one of the success stories where a standardized Environmental Protection Agency (EPA) methodology was modified to better suit regulation of a trace element in agricultural subsurface drainage and information technology was developed to help guide stakeholders, provide assurances to the public and encourage innovation while improving compliance with State water quality objectives. The geographic focus of the paper is the western San Joaquin Valley where, in 1985, evapoconcentration of selenium in agricultural subsurface drainage water, diverted into large ponds within a federal wildlife refuge, caused teratogenecity in waterfowl embryos and in other sensitive wildlife species. The fallout from this environmental disaster was a concerted attempt by State and Federal water agencies to regulate non-point source loads of the trace element selenium. The complexity of selenium hydrogeochemistry, the difficulty and expense of selenium concentration monitoring and political discord between agricultural and environmental interests created challenges to the regulation process. Innovative policy and institutional constructs, supported by environmental monitoring and the web-based data management and dissemination systems, provided essential decision support, created opportunities for adaptive management and ultimately contributed to project success. The paper provides a retrospective on the contentious planning process and offers suggestions as to how the technical and institutional issues could have been resolved faster through early adoption of some of the core principles of sound EDSS design.

  16. July 28, 2010, Visiting Speaker Program, Science, Technology, and Innovation: Imperatives for National and Economic Security - Event Summary and Slideshow

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport(FactDepartment ofLetter Report: I11IG002RTC3 |Julian Wong21 st0 Innovation

  17. When does labor scarcity encourage innovation?

    E-Print Network [OSTI]

    Acemoglu, Daron

    This paper studies whether labor scarcity encourages technological advances, i.e., technology adoption or innovation, for example, as claimed by Habakkuk in the context of 19th-century United States. I define technology ...

  18. Eco-innovation indicator workshop 29th September 2005 at

    E-Print Network [OSTI]

    in implementing the Environment Technology Action Plan, linked to the Lisbon agenda · Currently, the field of eco-innovation frames in eco-innovation development: the innovation chain or system; and environment technology with itsEco-innovation indicator workshop 29th September 2005 at European Environment Agency Conclusions

  19. Loan Terms | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport(FactDepartment ofLetterEconomy andTerms Loan Terms The following terms are

  20. Innovative Technologies, Innovative Diplomacy | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the.pdfBreaking of BlytheDepartment ofEnergy InformationSavings for Airline

  1. Innovative Technologies, Innovative Diplomacy | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently Asked Questions for DOEthe RankingReformManager (ISSM)Department ofin| Department

  2. Innovative Microwave Technology - Energy Innovation Portal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHigh SchoolIn Other News linkThermalInner AreaA PathwayAdvanced Materials

  3. Adapting Decisions, Optimizing Facts and Predicting Figures: Can Convergence of Concepts, Tools, Technologies and Standards Catalyze Innovation?

    E-Print Network [OSTI]

    Datta, Shoumen

    2008-07-31T23:59:59.000Z

    Managing uncertainty is key in decision systems, such as supply chain management or military readiness. We propose a reasonable confluence of existing concepts, tools, technologies and standards that may, collectively, ...

  4. Minimizing the Cost of Innovative Nuclear Technology Through Flexibility: The Case of a Demonstration Accelerator-Driven Subcritical Reactor Park

    E-Print Network [OSTI]

    Cardin, Michel-Alexandre; Steer, Steven J.; Nuttall, William J.; Parks, Geoffrey T.; Gonçalves, Leonardo V.N.; de Neufville, Richard

    Presented is a methodology to analyze the expected Levelised Cost Of Electricity (LCOE) in the face of technology uncertainty for Accelerator-Driven Subcritical Reactors (ADSRs). It shows that flexibility in the design and deployment strategy...

  5. The critical role of manufacturing-process innovation on product development excellence in high-technology companies

    E-Print Network [OSTI]

    Duarte, Carlos E. A., 1962-

    2004-01-01T23:59:59.000Z

    Few managers of high-technology companies view manufacturing-process development as primary source of competitive advantage. For the last two decades trends have shown an increasing number of high-tech industries outsourcing ...

  6. Global Economy and IT IT: Recovery and Growth Government and IT IT and Society Strengthening Economies Innovation in information technology (IT) has fueled unprecedented economic gains in the last 30

    E-Print Network [OSTI]

    Narasayya, Vivek

    Global Economy and IT IT: Recovery and Growth Government and IT IT and Society Strengthening Economies Innovation in information technology (IT) has fueled unprecedented economic gains in the last 30-term stimulus to local economies but also position both developed and developing economies to compete

  7. This report provides an overview of a landmark conference held at the National Institute of Standards and Technology in October 2008, "Accelerating Innovation in 21st Century Biosciences: Identifying the

    E-Print Network [OSTI]

    to technological innovation in essential sectors, including agriculture, energy, environment, biopharmaceutical of the conference (see back cover). This Executive Summary reports on the expert input of bioscience professionals, produce energy, and manufacture biological drugs, therapeutics, and chemicals. These advances can only

  8. Direct Loan Servicing Centers for Students [includes PUT loans] For questions about loan repayment or other loan servicing issues, a borrower can contact his or her loan

    E-Print Network [OSTI]

    Grishok, Alla

    Servicing Center Phone: 800/848-0979 TDD/TTY: 800/848-0983 Overseas: 315/738-6634 Web site: www New York State TDD/TTY: 800/855-2880 outside New York State Web site: www.ed-servicing.com FedLoan Servicing (PHEAA) Phone: 800/699-2908 TDD/TTY: 800/722-8189 Overseas borrowers: 717-720-1985 Web site: www

  9. Enabling technologies: Supporting the development and use of innovative, energy-efficient, and environmentally friendly products and processes

    SciTech Connect (OSTI)

    NONE

    1999-02-01T23:59:59.000Z

    This pamphlet describes the Office of Industrial Technologies cooperative efforts to address industry needs for advanced materials, sensors and controls, process energy and energy efficiency. US industry needs enabling materials that are stronger and lighter, with resistance to high-temperature fatigue and improved resistance to corrosion and wear. New industrial materials such as intermetallic alloys and advanced ceramics have the potential to meet the challenges of the Industries of the Future. The manufacturing industries obtain over 85% of their energy from the on-site combustion of fuels. Enhancements to burners, boilers, and process heating systems can lower energy costs, reduce emissions, enhance fuel options, and increase safety and reliability. Robust, integrated measurement devices linked to intelligent control systems will enable US industry to use resources more efficiently and improve product quality. Through constant process monitoring and adjustment of parameters, these systems can reduce energy use and labor, minimize waste and pollution, and boost productivity. The Enabling Technologies Program is designed to address the cross-cutting needs of the Office of Industrial Technologies (OIT). OIT partners with industry to promote the development and use of energy-efficient, pollution-preventing technologies. The Nation`s environment benefits from greater use of these technologies, and industries benefit from cost savings, improved productivity, and increased competitiveness.

  10. Scientific Innovation Through Integration Capabilities Series

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Innovation Through Integration Capabilities Series www.emsl.pnnl.gov EMSL offers technologically sophisticated microscopy instruments capable of imaging a variety of sample types...

  11. Innovation Impact: Breakthrough Research Results (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2013-07-01T23:59:59.000Z

    The Innovation Impact brochure captures key breakthrough results across NREL's primary areas of renewable energy and energy efficiency research: solar, wind, bioenergy, transportation, buildings, analysis, and manufacturing technologies.

  12. LoanSTAR After 11 Years: A Report on the Successes and Lessons Learned from the LoanSTAR Program

    E-Print Network [OSTI]

    Haberl, J.; Claridge, D.; Turner, W. D.; O'Neal, D.; Heffington, W.; Verdict, M.

    2002-01-01T23:59:59.000Z

    energy use monitoring, to optimized the HVAC system?s operation, reduce and then maintain its reduced energy use. The Laboratory is currently working closely with the Texas State Enegy Conservation Office to help transfer this technology to the HVAC..., (March 1996). Turner, W.D., Haberl, J.S., Bryant, J., Finstad, C., Robinson, J. 1992. "Calibration Facility for the LoanSTAR Program," Proceedings of the 1992 ASME/JSES/KSES Solar Energy Conference, ASME, New York, N.Y., pp. 1269-1275, (April...

  13. Small-Scale Energy Loan Program

    Broader source: Energy.gov [DOE]

    The Oregon Small-Scale Energy Loan Program (SELP) - created in 1981 after voters approved a constitutional amendment authorizing the sale of bonds to finance small-scale, local energy projects - is...

  14. AlabamaSAVES Revolving Loan Program

    Broader source: Energy.gov [DOE]

    The Alabama Department of Economic and Community Affairs (ADECA) is now offering an energy efficiency and renewable energy revolving loan fund called AlabamaSAVES. The funds are available to...

  15. Clean Energy Manufacturing Revolving Loan Fund

    Broader source: Energy.gov [DOE]

    The Wisconsin Economic Development Corporation and The Wisconsin Department of Administration are offering private sector businesses eligible for low interest loans up to $1,000,000 from the CERL...

  16. Clark Public Utilities- Solar Energy Equipment Loan

    Broader source: Energy.gov [DOE]

    Clark Public Utilities offers financing available to its customers for the purchase and installation of residential solar equipment. Loans up to $10,000 are available for solar pool heaters and...

  17. EWEB- Residential Solar Water Heating Loan Program

    Broader source: Energy.gov [DOE]

    Eugene Water & Electric Board (EWEB) offers residential customers a loan and cash discount program called, "The Bright Way To Heat Water." The program is designed to promote the installation of...

  18. Georgia Green Loans Save and Sustain Program

    Broader source: Energy.gov [DOE]

    Georgia Green Loans, a non-profit microlending agency, offers funding to "green" businesses using funding from a Georgia Environmental Finance Authority (GEFA) grant. The GEFA grant is based on...

  19. Southeastern Electric- Electric Equipment Loan Program

    Broader source: Energy.gov [DOE]

    Southeastern Electric Cooperative is a member-owned electric cooperative that serves customers in the southeastern part of South Dakota. Southeastern offers a loan program for customers who want...

  20. PSE&G- Solar Loan Program

    Broader source: Energy.gov [DOE]

    Public Service Electric and Gas (PSE&G) of New Jersey, the largest utility in the State, offers loans for "behind the meter" photovoltaic (PV) systems to all customer classes in its electric...