Powered by Deep Web Technologies
Note: This page contains sample records for the topic "inlet pilot tidal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

EA-1949: Admiralty Inlet Pilot Tidal Project, Puget Sound, WA  

Broader source: Energy.gov [DOE]

This EA analyzes the potential environmental effects of a proposal by the Public Utility District No. 1 of Snohomish County, Washington to construct and operate the Admiralty Inlet Tidal Project. The proposed 680-kilowatt project would be located on the east side of Admiralty Inlet in Puget Sound, Washington, about 1 kilometer west of Whidbey Island, entirely within Island County, Washington. The Federal Energy Regulatory Commission (FERC) is the lead agency. The DOE NEPA process for this project has been canceled.

2

Acoustic Monitoring of Beluga Whale Interactions with Cook Inlet Tidal Energy Project  

SciTech Connect (OSTI)

Cook Inlet, Alaska is home to some of the greatest tidal energy resources in the U.S., as well as an endangered population of beluga whales (Delphinapterus leucas). Successfully permitting and operating a tidal power project in Cook Inlet requires a biological assessment of the potential and realized effects of the physical presence and sound footprint of tidal turbines on the distribution, relative abundance, and behavior of Cook Inlet beluga whales. ORPC Alaska, working with the Project Team—LGL Alaska Research Associates, University of Alaska Anchorage, TerraSond, and Greeneridge Science—undertook the following U.S. Department of Energy (DOE) study to characterize beluga whales in Cook Inlet – Acoustic Monitoring of Beluga Whale Interactions with the Cook Inlet Tidal Energy Project (Project). ORPC Alaska, LLC, is a wholly-owned subsidiary of Ocean Renewable Power Company, LLC, (collectively, ORPC). ORPC is a global leader in the development of hydrokinetic power systems and eco-conscious projects that harness the power of ocean and river currents to create clean, predictable renewable energy. ORPC is developing a tidal energy demonstration project in Cook Inlet at East Foreland where ORPC has a Federal Energy Regulatory Commission (FERC) preliminary permit (P-13821). The Project collected baseline data to characterize pre-deployment patterns of marine mammal distribution, relative abundance, and behavior in ORPC’s proposed deployment area at East Foreland. ORPC also completed work near Fire Island where ORPC held a FERC preliminary permit (P-12679) until March 6, 2013. Passive hydroacoustic devices (previously utilized with bowhead whales in the Beaufort Sea) were adapted for study of beluga whales to determine the relative abundance of beluga whale vocalizations within the proposed deployment areas. Hydroacoustic data collected during the Project were used to characterize the ambient acoustic environment of the project site pre-deployment to inform the FERC pilot project process. The Project compared results obtained from this method to results obtained from other passive hydrophone technologies and to visual observation techniques performed simultaneously. This Final Report makes recommendations on the best practice for future data collection, for ORPC’s work in Cook Inlet specifically, and for tidal power projects in general. This Project developed a marine mammal study design and compared technologies for hydroacoustic and visual data collection with potential for broad application to future tidal and hydrokinetic projects in other geographic areas. The data collected for this Project will support the environmental assessment of future Cook Inlet tidal energy projects, including ORPC’s East Foreland Tidal Energy Project and any tidal energy developments at Fire Island. The Project’s rigorous assessment of technology and methodologies will be invaluable to the hydrokinetic industry for developing projects in an environmentally sound and sustainable way for areas with high marine mammal activity or endangered populations. By combining several different sampling methods this Project will also contribute to the future preparation of a comprehensive biological assessment of ORPC’s projects in Cook Inlet.

Worthington, Monty [Project Director - AK] [Project Director - AK

2014-02-05T23:59:59.000Z

3

Tidal inlet processes and deposits along a low energy coastline: easter Barataria Bight, Louisiana  

SciTech Connect (OSTI)

Historical, seismic and vibracore data were used to determine the geologic framework of sand deposits along the predominantly muddy coastline of eastern Barataria Bight, Louisiana. Three inlet types with distinct sand body geometries and morphologies were identified and are found 1) at flanking barrier island systems spread laterally across the front of interdistributary bays; 2) in old distributary channels; 3) at overwash breaches; or 4) combination of these. Barataria Bight, a sheltered barrier island shoreline embayment with limited sand supply, minimal tidal range (36 cm) and low wave energies (30 cm) can be used to show examples of each inlet type. Barataria Pass and Quatre Bayou Pass are inlets located in old distributary channels. However, Barataria Pass has also been affected by construction between barrier islands. Pass Ronquille is located where the coastline has transgressed a low area in the delta plain. This breach is situated in a hydraulically efficient avenue between the Gulf and Bay Long behind it. Pass Abel is a combination of a low-profile barrier breach and the reoccupation of an old distributary channel. Shelf and shoreline sands are reworked from abandoned deltaic distributaries and headlands. Inner shelf sands are concentrated in thick (10 m) shore-normal relict distributary channels with fine grained cross-bedded and ripple laminated sand overlain by burrowed shelf muds. Shoreface sand deposits occur as 2-3 m thick, fine-grained, coarsening upward and burrowed ebb-tidal delta sequences and shore-parallel relict tidal inlet channels filled through lateral accretion.

Moslow, T.F.; Levin, D.R.

1985-01-01T23:59:59.000Z

4

Study of the Acoustic Effects of Hydrokinetic Tidal Turbines in Admiralty Inlet, Puget Sound  

SciTech Connect (OSTI)

Hydrokinetic turbines will be a source of noise in the marine environment - both during operation and during installation/removal. High intensity sound can cause injury or behavioral changes in marine mammals and may also affect fish and invertebrates. These noise effects are, however, highly dependent on the individual marine animals; the intensity, frequency, and duration of the sound; and context in which the sound is received. In other words, production of sound is a necessary, but not sufficient, condition for an environmental impact. At a workshop on the environmental effects of tidal energy development, experts identified sound produced by turbines as an area of potentially significant impact, but also high uncertainty. The overall objectives of this project are to improve our understanding of the potential acoustic effects of tidal turbines by: (1) Characterizing sources of existing underwater noise; (2) Assessing the effectiveness of monitoring technologies to characterize underwater noise and marine mammal responsiveness to noise; (3) Evaluating the sound profile of an operating tidal turbine; and (4) Studying the effect of turbine sound on surrogate species in a laboratory environment. This study focuses on a specific case study for tidal energy development in Admiralty Inlet, Puget Sound, Washington (USA), but the methodologies and results are applicable to other turbine technologies and geographic locations. The project succeeded in achieving the above objectives and, in doing so, substantially contributed to the body of knowledge around the acoustic effects of tidal energy development in several ways: (1) Through collection of data from Admiralty Inlet, established the sources of sound generated by strong currents (mobilizations of sediment and gravel) and determined that low-frequency sound recorded during periods of strong currents is non-propagating pseudo-sound. This helped to advance the debate within the marine and hydrokinetics acoustic community as to whether strong currents produce propagating sound. (2) Analyzed data collected from a tidal turbine operating at the European Marine Energy Center to develop a profile of turbine sound and developed a framework to evaluate the acoustic effects of deploying similar devices in other locations. This framework has been applied to Public Utility District No. 1 of Snohomish Country's demonstration project in Admiralty Inlet to inform postinstallation acoustic and marine mammal monitoring plans. (3) Demonstrated passive acoustic techniques to characterize the ambient noise environment at tidal energy sites (fixed, long-term observations recommended) and characterize the sound from anthropogenic sources (drifting, short-term observations recommended). (4) Demonstrated the utility and limitations of instrumentation, including bottom mounted instrumentation packages, infrared cameras, and vessel monitoring systems. In doing so, also demonstrated how this type of comprehensive information is needed to interpret observations from each instrument (e.g., hydrophone data can be combined with vessel tracking data to evaluate the contribution of vessel sound to ambient noise). (5) Conducted a study that suggests harbor porpoise in Admiralty Inlet may be habituated to high levels of ambient noise due to omnipresent vessel traffic. The inability to detect behavioral changes associated with a high intensity source of opportunity (passenger ferry) has informed the approach for post-installation marine mammal monitoring. (6) Conducted laboratory exposure experiments of juvenile Chinook salmon and showed that exposure to a worse than worst case acoustic dose of turbine sound does not result in changes to hearing thresholds or biologically significant tissue damage. Collectively, this means that Chinook salmon may be at a relatively low risk of injury from sound produced by tidal turbines located in or near their migration path. In achieving these accomplishments, the project has significantly advanced the District's goals of developing a demonstration-scale tidal energy proj

Brian Polagye; Jim Thomson; Chris Bassett; Jason Wood; Dom Tollit; Robert Cavagnaro; Andrea Copping

2012-03-30T23:59:59.000Z

5

Hydraulic properties of an artificial tidal inlet through a Texas barrier beach  

E-Print Network [OSTI]

. These littoral barriers are depositional structures continually changed by waves, tidal currents, and winds. Often the only connections between the open ocean and the bays are small restricted channels through the barrier beaches. These chan- nels, or tidal... too large on wide barrier beaches to permit sufficient scour. Breakthroughs also have been found to be caused by gradual buildups of water in the bays, followed by wind shifts to an off. ? shore direction (27). This tends to be supported by Price...

Prather, Stanley Harold

1972-01-01T23:59:59.000Z

6

Laboratory studies of eddy structures and exchange processes through tidal inlets  

E-Print Network [OSTI]

of the inlet. b) Longitudinal position of the center of the main vortex starting from the edge of the barrier island. c) Lateral position of the center of the main vortex starting from the edge of the barrier island. d) Circulation around the main vortex... island. d) Circulation around the main vortex. e) Maximum vorticity in the main vortex. f) Equivalent diameter of the main vortex. g) Upwelling flowing from the main vortex. ...........................................34 Figure 11 Life-history Type I...

Nicolau del Roure, Francisco

2009-06-02T23:59:59.000Z

7

MHK Projects/Central Cook Inlet Alaska Tidal Energy Project | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpIncMAK Technologies Jump to:BW2 Tidal <CETO LaCat Island

8

MHK Projects/Central Cook Inlet Tidal Energy Project | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpIncMAK Technologies Jump to:BW2 Tidal <CETO LaCat

9

Miocene fluvial-tidal sedimentation in a residual forearc basin of the Northeastern Pacific Rim: Cook Inlet, Alaska case study  

SciTech Connect (OSTI)

Cook Inlet in southern Alaska represents a Cenozoic residual forearc basin in a convergent continental margin, where the Pacific Plate is being subducted beneath the North American Plate. This basin accumulated the >6,700-m-thick, mainly nonmarine, Eocene-Pliocene Kenai Group. These rocks contain biogenic coal-bed methane estimated to be as high as 245 TCF. Lignites to subbituminous coals with subsurface R{sub o} ranging from 0.38 to 0.73 percent and the stage of clay-mineral diagenesis and expandibility indicate a thermally {open_quotes}cool{close_quotes} basin. Miocene Tyonek and Beluga Formations compose 65 percent (>4,300 m thick) of the Kenai Group. The Tyonek includes conglomeratic sandstones, siltstones, mudstones, coals, and carbonaceous shales, interpreted as braided- stream deposits. These fluvial deposits are interbecided with burrowed, lenticular, and flaser-bedded sandstones, siltstones, and mudstones, interpreted as tidal deposits. Tyonek framework conglomerates formed in wet alluvial fans incised on paleovalleys of the Chugach terrane. Coal-forming mires are well developed on abandoned braided-stream deposits. Tyonek drainages formed in high-gradient alluvial plains inundated by tides similar to environments in the modern upper Cook Inlet. The upper Miocene Beluga consists of sandstones, siltstones, mudstones, carbonaceous shales, and coals deposited in meandering (low sinuosity) and anastomosed fluvial systems. These fluvial deposits alternated vertically with deposits of coal-forming mires. The Beluga drainages formed in low-gradient alluvial plains. The high-gradient Tyonek alluvial plain was probably controlled by provenance uplift and eustatic change, whereas the low-gradient Beluga alluvial plain was influenced by subdued provenance uplift and rapid basin subsidence. Rapid sedimentation on both these low- and high-gradient alluvial plains, which kept up with subsidence, produced a thermally {open_quotes}cool{close_quotes} basin.

Stricker, G.D.; Flores, R.M. [Geological Survey, Denver, CO (United States)

1996-12-31T23:59:59.000Z

10

Miocene fluvial-tidal sedimentation in a residual forearc basin of the Northeastern Pacific Rim: Cook Inlet, Alaska case study  

SciTech Connect (OSTI)

Cook Inlet in southern Alaska represents a Cenozoic residual forearc basin in a convergent continental margin, where the Pacific Plate is being subducted beneath the North American Plate. This basin accumulated the >6,700-m-thick, mainly nonmarine, Eocene-Pliocene Kenai Group. These rocks contain biogenic coal-bed methane estimated to be as high as 245 TCF. Lignites to subbituminous coals with subsurface R[sub o] ranging from 0.38 to 0.73 percent and the stage of clay-mineral diagenesis and expandibility indicate a thermally [open quotes]cool[close quotes] basin. Miocene Tyonek and Beluga Formations compose 65 percent (>4,300 m thick) of the Kenai Group. The Tyonek includes conglomeratic sandstones, siltstones, mudstones, coals, and carbonaceous shales, interpreted as braided- stream deposits. These fluvial deposits are interbecided with burrowed, lenticular, and flaser-bedded sandstones, siltstones, and mudstones, interpreted as tidal deposits. Tyonek framework conglomerates formed in wet alluvial fans incised on paleovalleys of the Chugach terrane. Coal-forming mires are well developed on abandoned braided-stream deposits. Tyonek drainages formed in high-gradient alluvial plains inundated by tides similar to environments in the modern upper Cook Inlet. The upper Miocene Beluga consists of sandstones, siltstones, mudstones, carbonaceous shales, and coals deposited in meandering (low sinuosity) and anastomosed fluvial systems. These fluvial deposits alternated vertically with deposits of coal-forming mires. The Beluga drainages formed in low-gradient alluvial plains. The high-gradient Tyonek alluvial plain was probably controlled by provenance uplift and eustatic change, whereas the low-gradient Beluga alluvial plain was influenced by subdued provenance uplift and rapid basin subsidence. Rapid sedimentation on both these low- and high-gradient alluvial plains, which kept up with subsidence, produced a thermally [open quotes]cool[close quotes] basin.

Stricker, G.D.; Flores, R.M. (Geological Survey, Denver, CO (United States))

1996-01-01T23:59:59.000Z

11

Puget Sound Tidal Energy In-Water Testing and Development Project Final Technical Report  

SciTech Connect (OSTI)

Tidal energy represents potential for the generation of renewable, emission free, environmentally benign, and cost effective energy from tidal flows. A successful tidal energy demonstration project in Puget Sound, Washington may enable significant commercial development resulting in important benefits for the northwest region and the nation. This project promoted the United States Department of Energy�s Wind and Hydropower Technologies Program�s goals of advancing the commercial viability, cost-competitiveness, and market acceptance of marine hydrokinetic systems. The objective of the Puget Sound Tidal Energy Demonstration Project is to conduct in-water testing and evaluation of tidal energy technology as a first step toward potential construction of a commercial-scale tidal energy power plant. The specific goal of the project phase covered by this award was to conduct all activities necessary to complete engineering design and obtain construction approvals for a pilot demonstration plant in the Admiralty Inlet region of the Puget Sound. Public Utility District No. 1 of Snohomish County (The District) accomplished the objectives of this award through four tasks: Detailed Admiralty Inlet Site Studies, Plant Design and Construction Planning, Environmental and Regulatory Activities, and Management and Reporting. Pre-Installation studies completed under this award provided invaluable data used for site selection, environmental evaluation and permitting, plant design, and construction planning. However, these data gathering efforts are not only important to the Admiralty Inlet pilot project. Lessons learned, in particular environmental data gathering methods, can be applied to future tidal energy projects in the United States and other parts of the world. The District collaborated extensively with project stakeholders to complete the tasks for this award. This included Federal, State, and local government agencies, tribal governments, environmental groups, and others. All required permit and license applications were completed and submitted under this award, including a Final License Application for a pilot hydrokinetic license from the Federal Energy Regulatory Commission. The tasks described above have brought the project through all necessary requirements to construct a tidal pilot project in Admiralty Inlet with the exception of final permit and license approvals, and the selection of a general contractor to perform project construction.

Craig W. Collar

2012-11-16T23:59:59.000Z

12

EA-1916: Ocean Renewable Power Company Maine, LLC Cobscook Bay Tidal Energy Pilot Project, Cobscook in Washington County, Maine  

Broader source: Energy.gov [DOE]

Draft Environmental AssessmentThis EA evaluates the environmental impacts of a project that would use the tidal currents of Cobscook Bay to generate electricity via cross-flow Kinetic System turbine generator units (TGU) mounted on the seafloor. The TGUs would capture energy from the flow in both ebb and flood directions.

13

Measuring the Impact of Tidal Power Installations on Endangered...  

Energy Savers [EERE]

Renewable Power Company (ORPC) is conducting a two-year study on the effects of tidal turbines on endangered beluga whales in Cook Inlet, Alaska-home to some of the greatest tidal...

14

Interactions Between Tidal Flows and Ooid Shoals, Northern Bahamas  

E-Print Network [OSTI]

active sand waves and ripples. Towards the platform margin, tidal currents pass through narrow inlets. The main inlet opening oceanward (NW) of the shoal stretches between two Pleistocene bedrock islands, connected by a bedrock high that extends... include both flood and ebb tidal deltas, with generally lobate forms, convex away from the islands, and with endpoints at the inlets. Although the inner portions of these lobes are mainly seagrass-stabilized muddy peloidal and skeletal sands with local...

Reeder, Stacy Lynn; Rankey, Gene C.

2008-03-01T23:59:59.000Z

15

All Eyes on Eastport: Tidal Energy Project Brings Change, Opportunity...  

Office of Environmental Management (EM)

Ocean Renewable Power Company will unveil its first commercial-scale tidal turbine before it is deployed underwater to generate power. The pilot project -- supported by...

16

Zarillo, G. A., and Brehin, F. G. A. 2007. Hydrodynamic and Morphologic Modeling at Sebastian Inlet, FL. Proceedings Coastal Sediments '07 Conference, ASCE Press, Reston,  

E-Print Network [OSTI]

Inlet, FL. Proceedings Coastal Sediments '07 Conference, ASCE Press, Reston, VA, 1297-1310. HYDRODYNAMIC Modeling System (CMS) to investigate the morphological response to time varying forcing, sediment texture evolution of tidal inlet shoals is an important management tool, since they control sediment budgets. Inlet

US Army Corps of Engineers

17

Design of bioaerosol sampling inlets  

E-Print Network [OSTI]

a Stokes scaling factor to selective parameters, such as inlet aspiration gap, annular gap, window height, and the rise which is the vertical distance extending from the lower flange to the base of the window. The scaled inlets display wind...

Nene, Rohit Ravindra

2007-09-17T23:59:59.000Z

18

Inlet nozzle assembly  

DOE Patents [OSTI]

An inlet nozzle assembly for directing coolant into the duct tube of a fuel assembly attached thereto. The nozzle assembly includes a shell for housing separable components including an orifice plate assembly, a neutron shield block, a neutron shield plug, and a diffuser block. The orifice plate assembly includes a plurality of stacked plates of differently configurated and sized openings for directing coolant therethrough in a predesigned flow pattern.

Christiansen, D.W.; Karnesky, R.A.; Knight, R.C.; Precechtel, D.R.; Smith, B.G.

1985-09-09T23:59:59.000Z

19

Inlet nozzle assembly  

DOE Patents [OSTI]

An inlet nozzle assembly for directing coolant into the duct tube of a fuel assembly attached thereto. The nozzle assembly includes a shell for housing separable components including an orifice plate assembly, a neutron shield block, a neutron shield plug, and a diffuser block. The orifice plate assembly includes a plurality of stacked plates of differently configurated and sized openings for directing coolant therethrough in a predesigned flow pattern.

Christiansen, David W. (Kennewick, WA); Karnesky, Richard A. (Richland, WA); Precechtel, Donald R. (Richland, WA); Smith, Bob G. (Richland, WA); Knight, Ronald C. (Richland, WA)

1987-01-01T23:59:59.000Z

20

Laboratory Analysis of Vortex Dynamics For Shallow Tidal Inlets  

E-Print Network [OSTI]

of the secondary structures into the vortex system are shown as well as variations in characteristics such as trajectory, size, vorticity, and circulation for the vortices as they move downstream. iv To the loved ones who have encouraged me along the way. v.... : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : 30 13 Non-Dimensional Vorticity at the Swirl Strength Peak for the Pri- mary Vortex Within the Vortex System Versus Non-Dimensional Horizontal Location of the Centroid. : : : : : : : : : : : : : : : : : : 31 14 Non-Dimensional Circulation...

Whilden, Kerri Ann

2010-10-12T23:59:59.000Z

Note: This page contains sample records for the topic "inlet pilot tidal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

MHK Projects/Admirality Inlet Tidal Energy Project | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpIncMAK Technologies Jump to: navigation, searchOnshore, NULL<

22

MHK Projects/Cook Inlet Tidal Energy | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy Resources Jump to:46 - 429Lacey,(MonasterLowell Point, Alaska:Luz IILynnM Setek8512 Project City Nikiski,

23

Tidal Residual Eddies and their Effect on Water Exchange in Puget Sound  

SciTech Connect (OSTI)

Tidal residual eddies are one of the important hydrodynamic features in tidally dominant estuaries and coastal bays, and they could have significant effects on water exchange in a tidal system. This paper presents a modeling study of tides and tidal residual eddies in Puget Sound, a tidally dominant fjord-like estuary in the Pacific Northwest coast, using a three-dimensional finite-volume coastal ocean model. Mechanisms of vorticity generation and asymmetric distribution patterns around an island/headland were analyzed using the dynamic vorticity transfer approach and numerical experiments. Model results of Puget Sound show that a number of large twin tidal residual eddies exist in the Admiralty Inlet because of the presence of major headlands in the inlet. Simulated residual vorticities near the major headlands indicate that the clockwise tidal residual eddy (negative vorticity) is generally stronger than the anticlockwise eddy (positive vorticity) because of the effect of Coriolis force. The effect of tidal residual eddies on water exchange in Puget Sound and its sub-basins were evaluated by simulations of dye transport. It was found that the strong transverse variability of residual currents in the Admiralty Inlet results in a dominant seaward transport along the eastern shore and a dominant landward transport along the western shore of the Inlet. A similar transport pattern in Hood Canal is caused by the presence of tidal residual eddies near the entrance of the canal. Model results show that tidal residual currents in Whidbey Basin are small in comparison to other sub-basins. A large clockwise residual circulation is formed around Vashon Island near entrance of South Sound, which can potentially constrain the water exchange between the Central Basin and South Sound.

Yang, Zhaoqing; Wang, Taiping

2013-08-30T23:59:59.000Z

24

Effects of Tidal Turbine Noise on Fish Hearing and Tissues - Draft Final Report - Environmental Effects of Marine and Hydrokinetic Energy  

SciTech Connect (OSTI)

Snohomish Public Utility District No.1 plans to deploy two 6 meter OpenHydro tidal turbines in Admiralty Inlet in Puget Sound, under a FERC pilot permitting process. Regulators and stakeholders have raised questions about the potential effect of noise from the turbines on marine life. Noise in the aquatic environment is known to be a stressor to many types of aquatic life, including marine mammals, fish and birds. Marine mammals and birds are exceptionally difficult to work with for technical and regulatory reasons. Fish have been used as surrogates for other aquatic organisms as they have similar auditory structures. This project was funded under the FY09 Funding Opportunity Announcement (FOA) to Snohomish PUD, in partnership with the University of Washington - Northwest National Marine Renewable Energy Center, the Sea Mammal Research Unit, and Pacific Northwest National Laboratory. The results of this study will inform the larger research project outcomes. Proposed tidal turbine deployments in coastal waters are likely to propagate noise into nearby waters, potentially causing stress to native organisms. For this set of experiments, juvenile Chinook salmon (Oncorhynchus tshawytscha) were used as the experimental model. Plans exist for prototype tidal turbines to be deployed into their habitat. Noise is known to affect fish in many ways, such as causing a threshold shift in auditory sensitivity or tissue damage. The characteristics of noise, its spectra and level, are important factors that influence the potential for the noise to injure fish. For example, the frequency range of the tidal turbine noise includes the audiogram (frequency range of hearing) of most fish. This study was performed during FY 2011 to determine if noise generated by a 6-m diameter OpenHydro turbine might affect juvenile Chinook salmon hearing or cause barotrauma. Naturally spawning stocks of Chinook salmon that utilize Puget Sound are listed as threatened (http://www.nwr.noaa.gov/ESA-Salmon-Listings/Salmon-Populations/Chinook/CKPUG.cfm); the fish used in this experiment were hatchery raised and their populations are not in danger of depletion. After they were exposed to simulated tidal turbine noise, the hearing of juvenile Chinook salmon was measured and necropsies performed to check for tissue damage. Experimental groups were (1) noise exposed, (2) control (the same handling as treatment fish but without exposure to tidal turbine noise), and (3) baseline (never handled). Experimental results indicate that non-lethal, low levels of tissue damage may have occurred but that there were no effects of noise exposure on the auditory systems of the test fish.

Halvorsen, Michele B.; Carlson, Thomas J.; Copping, Andrea E.

2011-09-30T23:59:59.000Z

25

Tidal heating and tidal evolution in the solar system  

E-Print Network [OSTI]

In this thesis, we examine the effects of tidal dissipation on solid bodies in application and in theory. First, we study the effects of tidal heating and tidal evolution in the Saturnian satellite system. We constrain the ...

Meyer, Jennifer Ann

2011-01-01T23:59:59.000Z

26

Tidal Wetlands Regulations (Connecticut)  

Broader source: Energy.gov [DOE]

Most activities occurring in or near tidal wetlands are regulated, and this section contains information on such activities and required permit applications for proposed activities. Applications...

27

Clarence Strait Tidal Energy Project, Tenax Energy Tropical Tidal...  

Open Energy Info (EERE)

Test Centre, Jump to: navigation, search 1 Retrieved from "http:en.openei.orgwindex.php?titleClarenceStraitTidalEnergyProject,TenaxEnergyTropicalTidalTestCentre,&o...

28

Scramjet including integrated inlet and combustor  

SciTech Connect (OSTI)

This patent describes a scramjet engine. It comprises: a first surface including an aft facing step; a cowl including: a leading edge and a trailing edge; an upper surface and a lower surface extending between the leading edge and the trailing edge; the cowl upper surface being spaced from and generally parallel to the first surface to define an integrated inlet-combustor therebetween having an inlet for receiving and channeling into the inlet-combustor supersonic inlet airflow; means for injecting fuel into the inlet-combustor at the step for mixing with the supersonic inlet airflow for generating supersonic combustion gases; and further including a spaced pari of sidewalls extending between the first surface to the cowl upper surface and wherein the integrated inlet-combustor is generally rectangular and defined by the sidewall pair, the first surface and the cowl upper surface.

Kutschenreuter, P.H. Jr.; Blanton, J.C.

1992-02-04T23:59:59.000Z

29

Chaos and Tidal Capture  

E-Print Network [OSTI]

We review the tidal capture mechanism for binary formation, an important process in globular cluster cores and perhaps open cluster cores. Tidal capture binaries may be the precursors for some of the low-mass X-ray binaries observed in abundance in globular clusters. They may also play an important role in globular cluster dynamics. We summarize the chaos model for tidal interaction (Mardling 1995, ApJ, 450, 722, 732), and discuss how this affects our understanding of the circularization process which follows capture.

Rosemary A. Mardling

1995-12-07T23:59:59.000Z

30

Radial inlet guide vanes for a combustor  

DOE Patents [OSTI]

A combustor may include an interior flow path therethrough, a number of fuel nozzles in communication with the interior flow path, and an inlet guide vane system positioned about the interior flow path to create a swirled flow therein. The inlet guide vane system may include a number of windows positioned circumferentially around the fuel nozzles. The inlet guide vane system may also include a number of inlet guide vanes positioned circumferentially around the fuel nozzles and adjacent to the windows to create a swirled flow within the interior flow path.

Zuo, Baifang; Simons, Derrick; York, William; Ziminsky, Willy S

2013-02-12T23:59:59.000Z

31

Lake Worth Inlet Palm Beach Harbor  

E-Print Network [OSTI]

#12;1 Lake Worth Inlet Palm Beach Harbor Palm Beach County, Florida Integrated Feasibility Report, was engaged to conduct the IEPR of the Lake Worth Inlet, Palm Beach Harbor Integrated Feasibility Report and recent rates was added to Section 4.2.3. Clarification on the grouping of asphalt, fuel oil

US Army Corps of Engineers

32

Electrically heated particulate matter filter with recessed inlet end plugs  

DOE Patents [OSTI]

A particulate matter (PM) filter includes filter walls having inlet ends and outlet ends. First adjacent pairs of the filter walls define inlet channels. Second adjacent pairs of the filter walls define outlet channels. Outlet end plugs are arranged in the inlet channels adjacent to the output ends. Inlet end plugs arranged in the outlet channels spaced from the inlet ends.

Gonze, Eugene V. (Pinckney, MI); Ament, Frank (Troy, MI)

2012-02-21T23:59:59.000Z

33

Evaporation of Water from Particles in the Aerodynamic Lens Inlet...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

of Water from Particles in the Aerodynamic Lens Inlet: An Experimental Study. Evaporation of Water from Particles in the Aerodynamic Lens Inlet: An Experimental Study. Abstract:...

34

Sample inlet tube for ion source  

DOE Patents [OSTI]

An improved inlet tube is positioned within an aperture through the device to allow the passage of ions from the ion source, through the improved inlet tube, and into the interior of the device. The inlet tube is designed with a larger end and a smaller end wherein the larger end has a larger interior diameter than the interior diameter of the smaller end. The inlet tube is positioned within the aperture such that the larger end is pointed towards the ion source, to receive ions therefrom, and the smaller end is directed towards the interior of the device, to deliver the ions thereto. Preferably, the ion source utilized in the operation of the present invention is a standard electrospray ionization source. Similarly, the present invention finds particular utility in conjunction with analytical devices such as mass spectrometers.

Prior, David [Hermiston, OR; Price, John [Richland, WA; Bruce, Jim [Oceanside, CA

2002-09-24T23:59:59.000Z

35

An experimental investigation of flow control for supersonic inlets  

E-Print Network [OSTI]

and scramjet configurations. (a) normal shock inlet (b) external compression (c) internal compression (d) mixed compression Figure 2.5: Di?erent inlet types2.5.2 Pitot inlets The simplest supersonic inlet design arises from the use of a single shock...

Titchener, Neil

2013-07-09T23:59:59.000Z

36

Miniature piezo electric vacuum inlet valve  

DOE Patents [OSTI]

A miniature piezo electric vacuum inlet valve having a fast pulse rate and is battery operated with variable flow capability is disclosed. The low power (<1.6 watts), high pulse rate (<2 milliseconds), variable flow inlet valve is utilized for mass spectroscopic applications or other applications where pulsed or continuous flow conditions are needed. The inlet valve also has a very minimal dead volume of less than 0.01 std/cc. The valve can utilize, for example, a 12 Vdc input/750 Vdc, 3 mA output power supply compared to conventional piezo electric valves which require preloading of the crystal drive mechanism and 120 Vac, thus the valve of the present invention is smaller by a factor of three. 6 figs.

Keville, R.F.; Dietrich, D.D.

1998-03-24T23:59:59.000Z

37

Miniature piezo electric vacuum inlet valve  

DOE Patents [OSTI]

A miniature piezo electric vacuum inlet valve having a fast pulse rate and is battery operated with variable flow capability. The low power (<1.6 watts), high pulse rate (<2 milliseconds), variable flow inlet valve is utilized for mass spectroscopic applications or other applications where pulsed or continuous flow conditions are needed. The inlet valve also has a very minimal dead volume of less than 0.01 std/cc. The valve can utilize, for example, a 12 Vdc input/750 Vdc, 3 mA output power supply compared to conventional piezo electric valves which require preloading of the crystal drive mechanism and 120 Vac, thus the valve of the present invention is smaller by a factor of three.

Keville, Robert F. (Valley Springs, CA); Dietrich, Daniel D. (Livermore, CA)

1998-03-24T23:59:59.000Z

38

Tidal Energy Research  

SciTech Connect (OSTI)

This technical report contains results on the following topics: 1) Testing and analysis of sub-scale hydro-kinetic turbines in a flume, including the design and fabrication of the instrumented turbines. 2) Field measurements and analysis of the tidal energy resource and at a site in northern Puget Sound, that is being examined for turbine installation. 3) Conceptual design and performance analysis of hydro-kinetic turbines operating at high blockage ratio, for use for power generation and flow control in open channel flows.

Stelzenmuller, Nickolas [Univ of Washington; Aliseda, Alberto [Univ of Washington; Palodichuk, Michael [Univ of Washington; Polagye, Brian [Univ of Washington; Thomson, James [Univ of Washington; Chime, Arshiya [Univ of Washington; Malte, Philip [Univ of washington

2014-03-31T23:59:59.000Z

39

GLOBAL CHANGE AND TIDAL FRESHWATER WETLANDS  

E-Print Network [OSTI]

Chapter 23 GLOBAL CHANGE AND TIDAL FRESHWATER WETLANDS: SCENARIOS AND IMPACTS Scott C. Neubauer Tidal Freshwater Wetlands, edited by Aat Barendregt, Dennis Whigham & Andrew Baldwin 2009, viii + 320pp Publishers GmbH This chapter was originally published in the book ,,Tidal Freshwater Wetlands". The copy

Neubauer, Scott C.

40

NISTIR 6458 Characterization of the Inlet Combustion Air in  

E-Print Network [OSTI]

NISTIR 6458 Characterization of the Inlet Combustion Air in NIST's Reference Spray Combustion January 2000 #12;ii Contents page Introduction 1 Reference Spray Combustion Facility 3 Numerical;1 Characterization of the Inlet Combustion Air in NIST's Reference Spray Combustion Facility: Effect of Vane Angle

Magee, Joseph W.

Note: This page contains sample records for the topic "inlet pilot tidal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Properties and stability of a Texas barrier beach inlet  

E-Print Network [OSTI]

, breakthroughs from the bay side on both wide and narrow islands have been attributed to the gradual buildup of water in the lagoon, followed by a sudden shift in wind to an offshore direction (gg). Thus, large quantities of water are piled up on the island... of central Texas coastal inlets (44), attributes these characteristics of stable inlets to four factors: 1) the position of bays north of the barrier island, 2) strong north winds which funnel water through the inlets, 3) the direction of longshore drift...

Mason, Curtis

1971-01-01T23:59:59.000Z

42

Tidally-induced thermonuclear Supernovae  

E-Print Network [OSTI]

We discuss the results of 3D simulations of tidal disruptions of white dwarfs by moderate-mass black holes as they may exist in the cores of globular clusters or dwarf galaxies. Our simulations follow self-consistently the hydrodynamic and nuclear evolution from the initial parabolic orbit over the disruption to the build-up of an accretion disk around the black hole. For strong enough encounters (pericentre distances smaller than about 1/3 of the tidal radius) the tidal compression is reversed by a shock and finally results in a thermonuclear explosion. These explosions are not restricted to progenitor masses close to the Chandrasekhar limit, we find exploding examples throughout the whole white dwarf mass range. There is, however, a restriction on the masses of the involved black holes: black holes more massive than 2 × 10 5 M? swallow a typical 0.6 M ? white dwarf before their tidal forces can overwhelm the star’s selfgravity. Therefore, this mechanism is characteristic for black holes of moderate masses. The material that remains bound to the black hole settles into an accretion disk and produces an X-ray flare close to the Eddington limit of LEdd ? 10 41 erg/s (Mbh/1000M?), typically lasting for a few months. The combination of a peculiar thermonuclear supernova together with an X-ray flare thus whistle-blows the existence of such moderate-mass black holes. The next generation of wide field space-based instruments should be able to detect such events. 1.

Stephan Rosswog; Enrico Ramirez-ruiz; W. Raphael Hix

43

Tidally-induced thermonuclear Supernovae  

E-Print Network [OSTI]

We discuss the results of 3D simulations of tidal disruptions of white dwarfs by moderate-mass black holes as they may exist in the cores of globular clusters or dwarf galaxies. Our simulations follow self-consistently the hydrodynamic and nuclear evolution from the initial parabolic orbit over the disruption to the build-up of an accretion disk around the black hole. For strong enough encounters (pericentre distances smaller than about 1/3 of the tidal radius) the tidal compression is reversed by a shock and finally results in a thermonuclear explosion. These explosions are not restricted to progenitor masses close to the Chandrasekhar limit, we find exploding examples throughout the whole white dwarf mass range. There is, however, a restriction on the masses of the involved black holes: black holes more massive than $2\\times 10^5$ M$_\\odot$ swallow a typical 0.6 M$_\\odot$ dwarf before their tidal forces can overwhelm the star's self-gravity. Therefore, this mechanism is characteristic for black holes of moderate masses. The material that remains bound to the black hole settles into an accretion disk and produces an X-ray flare close to the Eddington limit of $L_{\\rm Edd} \\simeq 10^{41} {\\rm erg/s} M_{\\rm bh}/1000 M$_\\odot$), typically lasting for a few months. The combination of a peculiar thermonuclear supernova together with an X-ray flare thus whistle-blows the existence of such moderate-mass black holes. The next generation of wide field space-based instruments should be able to detect such events.

S. Rosswog; E. Ramirez-Ruiz; W. R. Hix

2008-11-13T23:59:59.000Z

44

Flow analysis and control in a subsonic inlet  

E-Print Network [OSTI]

S-duct inlets are commonly used on subsonic cruise missiles, as they offer a good compromise between compactness, low observability and aerodynamic performance. Though currently used S-ducts exhibit good performance in ...

Tournier, Serge (Serge E.)

2005-01-01T23:59:59.000Z

45

An experimental investigation into enhancing pulsejet performance through inlet redesign  

E-Print Network [OSTI]

operation, the engine was tested in a moving flow of air. The experimental data consisted of combustion chamber pressure measurements, inlet pressure measurements and thrust measurements. The diffuser configuration successfully achieved the research...

Wood, Randolph Handley, 1967-

1994-01-01T23:59:59.000Z

46

TIDAL FRICTION AND TIDAL LAGGING. APPLICABILITY LIMITATIONS OF A POPULAR FORMULA FOR THE TIDAL TORQUE  

SciTech Connect (OSTI)

Tidal torques play a key role in rotational dynamics of celestial bodies. They govern these bodies' tidal despinning and also participate in the subtle process of entrapment of these bodies into spin-orbit resonances. This makes tidal torques directly relevant to the studies of habitability of planets and their moons. Our work begins with an explanation of how friction and lagging should be built into the theory of bodily tides. Although much of this material can be found in various publications, a short but self-consistent summary on the topic has been lacking in the hitherto literature, and we are filling the gap. After these preparations, we address a popular concise formula for the tidal torque, which is often used in the literature, for planets or stars. We explain why the derivation of this expression, offered in the paper by Goldreich and in the books by Kaula (Equation (4.5.29)) and Murray and Dermott (Equation (4.159)), implicitly sets the time lag to be frequency independent. Accordingly, the ensuing expression for the torque can be applied only to bodies having a very special (and very hypothetical) rheology which makes the time lag frequency independent, i.e., the same for all Fourier modes in the spectrum of tide. This expression for the torque should not be used for bodies of other rheologies. Specifically, the expression cannot be combined with an extra assertion of the geometric lag being constant, because at finite eccentricities the said assumption is incompatible with the constant-time-lag condition.

Efroimsky, Michael; Makarov, Valeri V., E-mail: michael.efroimsky@usno.navy.mil, E-mail: vvm@usno.navy.mil [US Naval Observatory, Washington, DC 20392 (United States)

2013-02-10T23:59:59.000Z

47

European Wave and Tidal Energy Conference  

Broader source: Energy.gov [DOE]

The European Wave and Tidal Energy Conference (EWTEC) series are international, technical and scientific conferences, focussed on ocean renewable energy and widely respected for their commitment to...

48

Tidal Electric | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ < RAPID Jump to:Seadov Pty LtdSteen,Ltd Jump JumpAl., 1978) |Thrall,Tibagi Energetica Jump to:Tidal

49

Organics Verification Study for Sinclair and Dyes Inlets, Washington  

SciTech Connect (OSTI)

Sinclair and Dyes Inlets near Bremerton, Washington, are on the State of Washington 1998 303(d) list of impaired waters because of fecal coliform contamination in marine water, metals in sediment and fish tissue, and organics in sediment and fish tissue. Because significant cleanup and source control activities have been conducted in the inlets since the data supporting the 1998 303(d) listings were collected, two verification studies were performed to address the 303(d) segments that were listed for metal and organic contaminants in marine sediment. The Metals Verification Study (MVS) was conducted in 2003; the final report, Metals Verification Study for Sinclair and Dyes Inlets, Washington, was published in March 2004 (Kohn et al. 2004). This report describes the Organics Verification Study that was conducted in 2005. The study approach was similar to the MVS in that many surface sediment samples were screened for the major classes of organic contaminants, and then the screening results and other available data were used to select a subset of samples for quantitative chemical analysis. Because the MVS was designed to obtain representative data on concentrations of contaminants in surface sediment throughout Sinclair Inlet, Dyes Inlet, Port Orchard Passage, and Rich Passage, aliquots of the 160 MVS sediment samples were used in the analysis for the Organics Verification Study. However, unlike metals screening methods, organics screening methods are not specific to individual organic compounds, and are not available for some target organics. Therefore, only the quantitative analytical results were used in the organics verification evaluation. The results of the Organics Verification Study showed that sediment quality outside of Sinclair Inlet is unlikely to be impaired because of organic contaminants. Similar to the results for metals, in Sinclair Inlet, the distribution of residual organic contaminants is generally limited to nearshore areas already within the actively managed Puget Sound Naval Shipyard and Intermediate Maintenance Facility Superfund Site, where further source-control actions and monitoring are under way.

Kohn, Nancy P.; Brandenberger, Jill M.; Niewolny, Laurie A.; Johnston, Robert K.

2006-09-28T23:59:59.000Z

50

Tidal Heating of Extra-Solar Planets  

E-Print Network [OSTI]

Extra-solar planets close to their host stars have likely undergone significant tidal evolution since the time of their formation. Tides probably dominated their orbital evolution once the dust and gas had cleared away, and as the orbits evolved there was substantial tidal heating within the planets. The tidal heating history of each planet may have contributed significantly to the thermal budget that governed the planet's physical properties, including its radius, which in many cases may be measured by observing transit events. Typically, tidal heating increases as a planet moves inward toward its star and then decreases as its orbit circularizes. Here we compute the plausible heating histories for several planets with measured radii, using the same tidal parameters for the star and planet that had been shown to reconcile the eccentricity distribution of close-in planets with other extra-solar planets. Several planets are discussed, including for example HD 209458 b, which may have undergone substantial tidal heating during the past billion years, perhaps enough to explain its large measured radius. Our models also show that GJ 876 d may have experienced tremendous heating and is probably not a solid, rocky planet. Theoretical models should include the role of tidal heating, which is large, but time-varying.

Brian Jackson; Richard Greenberg; Rory Barnes

2008-02-29T23:59:59.000Z

51

Low inlet gas velocity high throughput biomass gasifier  

DOE Patents [OSTI]

The present invention discloses a novel method of operating a gasifier for production of fuel gas from carbonaceous fuels. The process disclosed enables operating in an entrained mode using inlet gas velocities of less than 7 feet per second, feedstock throughputs exceeding 4000 lbs/ft.sup.2 -hr, and pressures below 100 psia.

Feldmann, Herman F. (Worthington, OH); Paisley, Mark A. (Upper Arlington, OH)

1989-01-01T23:59:59.000Z

52

A Conceptual Restoration Plan and Tidal Hydrology Assessment for Reconnecting Spring Branch Creek to Suisun Marsh, Solano County, California  

E-Print Network [OSTI]

tidal wetland below MHLW Table 4.19. Performance IndicatorsPerformance Indicator All Tidal wetlands Tidal wetlands All

Olson, Jessica J.

2012-01-01T23:59:59.000Z

53

Half Moon Cove Tidal Project. Feasibility report  

SciTech Connect (OSTI)

The proposed Half Moon Cove Tidal Power Project would be located in a small cove in the northern part of Cobscook Bay in the vicinity of Eastport, Maine. The project would be the first tidal electric power generating plant in the United States of America. The basin impounded by the barrier when full will approximate 1.2 square miles. The average tidal range at Eastport is 18.2 feet. The maximum spring tidal range will be 26.2 feet and the neap tidal range 12.8 feet. The project will be of the single pool-type single effect in which generation takes place on the ebb tide only. Utilizing an average mean tidal range of 18.2 feet the mode of operation enables generation for approximately ten and one-half (10-1/2) hours per day or slightly in excess of five (5) hours per tide. The installed capacity will be 12 MW utilizing 2 to 6 MW units. An axial flow, or Bulb type of turbine was selected for this study.

Not Available

1980-11-01T23:59:59.000Z

54

Viscoelastic Models of Tidally Heated Exomoons  

E-Print Network [OSTI]

Tidal heating of exomoons may play a key role in their habitability, since the elevated temperature can melt the ice on the body even without significant solar radiation. The possibility of life is intensely studied on Solar System moons such as Europa or Enceladus, where the surface ice layer covers tidally heated water ocean. Tidal forces may be even stronger in extrasolar systems, depending on the properties of the moon and its orbit. For studying the tidally heated surface temperature of exomoons, we used a viscoelastic model for the first time. This model is more realistic than the widely used, so-called fixed Q models, because it takes into account the temperature dependency of the tidal heat flux, and the melting of the inner material. With the use of this model we introduced the circumplanetary Tidal Temperate Zone (TTZ), that strongly depends on the orbital period of the moon, and less on its radius. We compared the results with the fixed Q model and investigated the statistical volume of the TTZ usi...

Dobos, Vera

2015-01-01T23:59:59.000Z

55

Ambient Monitoring for Sinclair and Dyes Inlets, Puget Sound, Washington: Chemical Analyses for 2012 Regional Mussel Watch  

SciTech Connect (OSTI)

Under the Project ENVVEST Final Project Agreement, the Puget Sound Naval Shipyard & Intermediate Maintenance Facility (PSNS&IMF), Environmental Protection Agency (EPA), Washington State Department of Ecology (Ecology), and local stakeholders have worked collaboratively to improve the environmental quality of Sinclair and Dyes Inlets. A regional mussel monitoring program began in 2010 to assess the status and trend of ecological resources, assess the effectiveness of cleanup and pollution control measures, and determine if discharges from all sources are protective of beneficial uses including aquatic life. The program collected indigenous mussels to represent a time-integrated measure of bioavailable metals and organic chemicals present in the water column. This document supplements the 2010 indigenous mussel data with 2012 data to provide two years of data on the chemical residue of mussels present in the inter-tidal regions of Sinclair Inlet, Dyes Inlet, Port Orchard Passage, Rich Passage, Agate Passage, Liberty Bay, and Keyport Lagoon. The 2012 data set added one station at PSNS&IMF and one market samples from Penn Cove. Indigenous mussels were collected from a small boat and/or from along the shoreline, measured, composited, and analyzed for percent lipids, percent moisture, stable isotopes of carbon and nitrogen, and a suite of trace metals and organic contaminants. The trace metals included silver (Ag), arsenic (As), cadmium (Cd), copper (Cu), mercury (Hg), lead (Pb), and zinc (Zn). The organic contaminants included the list of NOAA Status and Trends 20 polychlorinated biphenyls (PCB) congeners and suite of parent and methylated polycyclic aromatic hydrocarbons (PAHs). The average lengths between the 2010 and 2012 data were generally less than 30% relative percent difference (RPD). Generally, the metals concentrations were lower in 2012 than 2010 with some notable exceptions in Sinclair Inlet and Rich Passage where increases in Ag, Hg, Pb, Cu, and Zn exceeded an RPD of 50% between years. However, they did not exceed the bioaccumulation critical values or the critical body residues corresponding to the no observed effect dose (NOED) and the lowest observed effect dose (LOED) with one exception. The Cd concentrations exceeded the NOED and LOED for the Manchester Lab Pier and the Pike Place Market samples. For the PAHs and PCB, the 2012 data were generally lower than 2010 and some cases significantly lower for PAHs and none of the available invertebrate benchmarks were exceeded.

Brandenberger, Jill M.; Kuo, Li-Jung; Suslick, Carolynn R.; Johnston, Robert K.

2012-09-01T23:59:59.000Z

56

Fitting orbits to tidal streams  

E-Print Network [OSTI]

Recent years have seen the discovery of many tidal streams through the Galaxy. Relatively straightforward observations of a stream allow one to deduce three phase-space coordinates of an orbit. An algorithm is presented that reconstructs the missing phase-space coordinates from these data. The reconstruction starts from assumed values of the Galactic potential and a distance to one point on the orbit, but with noise-free data the condition that energy be conserved on the orbit enables one to reject incorrect assumptions. The performance of the algorithm is investigated when errors are added to the input data that are comparable to those in published data for the streams of Pal 5. It is found that the algorithm returns distances and proper motions that are accurate to of order one percent, and enables one to reject quite reasonable but incorrect trial potentials. In practical applications it will be important to minimize errors in the input data, and there is considerable scope for doing this.

James Binney

2008-02-11T23:59:59.000Z

57

Numerical Analysis of Ethylene Injection in the Inlet of a Mach Six Scramjet.  

E-Print Network [OSTI]

??A scramjet inlet was designed for use on a small scale, Mach six, ethylene-fuelled vehicle. The inlet used strut-based cantilevered fuel injectors and a well-defined… (more)

West, Jonathan Philip

2011-01-01T23:59:59.000Z

58

Dynamic characterization and active control of unstarts in a near-isentropic supersonic inlet  

E-Print Network [OSTI]

A near-isentropic supersonic inlet, at Mach 2.2, has been designed to give enhanced recovery and thus increased range for a supersonic transport aircraft. In such a design a mixed compression inlet design is typically used. ...

Ahsun, Umair, 1972-

2004-01-01T23:59:59.000Z

59

Seal inlet disturbance boundary conditions for rotordynamic models and influence of some off-design conditions on labyrinth rotordynamic instability  

E-Print Network [OSTI]

Systematic parametric studies were performed to better understand seal-inlet rotordynamics. A CFD-perturbation model was employed to compute the seal-inlet flow disturbance quantities. Seal inlet disturbance boundary condition correlations were...

Xi, Jinxiang

2007-04-25T23:59:59.000Z

60

Assessment of Inlet Cooling to Enhance Output of a Fleet of Gas Turbines  

E-Print Network [OSTI]

An analysis was made to assess the potential enhancement of a fleet of 14 small gas turbines' power output by employing an inlet air cooling scheme at a gas process plant. Various gas turbine (GT) inlet air cooling schemes were reviewed. The inlet...

Wang, T.; Braquet, L.

2008-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "inlet pilot tidal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

COURSE SYLLABUS SPORT / PRIVATE PILOT  

E-Print Network [OSTI]

COURSE SYLLABUS SPORT / PRIVATE PILOT #12;#12;Cessna eLearning Web Based Instructional Programs Cessna Sport / Private Pilot Training Course SYLLABUS King Schools, Inc. 3840 Calle Fortunada San Diego States of America. #12;Ver. 1.02 Cessna Sport / Private Pilot Syllabus Your Path to Becoming a Pilot

62

TIDAL TURBULENCE SPECTRA FROM A COMPLIANT MOORING  

SciTech Connect (OSTI)

A compliant mooring to collect high frequency turbulence data at a tidal energy site is evaluated in a series of short demon- stration deployments. The Tidal Turbulence Mooring (TTM) improves upon recent bottom-mounted approaches by suspend- ing Acoustic Doppler Velocimeters (ADVs) at mid-water depths (which are more relevant to tidal turbines). The ADV turbulence data are superior to Acoustic Doppler Current Profiler (ADCP) data, but are subject to motion contamination when suspended on a mooring in strong currents. In this demonstration, passive stabilization is shown to be sufficient for acquiring bulk statistics of the turbulence, without motion correction. With motion cor- rection (post-processing), data quality is further improved; the relative merits of direct and spectral motion correction are dis- cussed.

Thomson, Jim; Kilcher, Levi; Richmond, Marshall C.; Talbert, Joe; deKlerk, Alex; Polagye, Brian; Guerra, Maricarmen; Cienfuegos, Rodrigo

2013-06-13T23:59:59.000Z

63

Renewable Energy Pilot Program  

Broader source: Energy.gov [DOE]

In June 2010, the Louisiana Public Service Commission (LPSC) unanimously approved a Renewable Energy Pilot Program for the state. The final implementation plan was adopted in November 2010. The...

64

TIDAL FRESHWATER WETLANDS OF THE MID-ATLANTIC AND  

E-Print Network [OSTI]

Chapter 14 TIDAL FRESHWATER WETLANDS OF THE MID-ATLANTIC AND SOUTHEASTERN UNITED STATES James E Publishers, Weikersheim, 2009 Tidal Freshwater Wetlands, edited by Aat Barendregt in the book ,,Tidal Freshwater Wetlands". The copy attached is provided by Margraf Publishers Gmb

Newman, Michael C.

65

Leveraging Resources for the Weatherization Innovation Pilot...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

the Weatherization Innovation Pilot Program (WIPP) - Webinar Transcript Leveraging Resources for the Weatherization Innovation Pilot Program (WIPP) - Webinar Transcript This...

66

Leveraging Resources for Weatherization Innovation Pilot Projects...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Weatherization Innovation Pilot Projects (WIPP) Presentation Leveraging Resources for Weatherization Innovation Pilot Projects (WIPP) Presentation As a WIPP agency, reporting...

67

Microbial field pilot study  

SciTech Connect (OSTI)

A multi-well microbially enhanced oil recovery field pilot has been performed in the Southeast Vassar Vertz Sand Unit in Payne County, Oklahoma. The primary emphasis of the experiment was preferential plugging of high permeability zones for the purpose of improving waterflood sweep efficiency. Studies were performed to determine reservoir chemistry, ecology, and indigenous bacteria populations. Growth experiments were used to select a nutrient system compatible with the reservoir that encouraged growth of a group of indigenous nitrate-using bacteria and inhibit growth of sulfate-reducing bacteria. A specific field pilot area behind an active line drive waterflood was selected. Surface facilities were designed and installed. Injection protocols of bulk nutrient materials were prepared to facilitate uniform distribution of nutrients within the pilot area. By the end of December, 1991, 82.5 tons (75.0 tonnes) of nutrients had been injected in the field. A tracer test identified significant heterogeneity in the SEVVSU and made it necessary to monitor additional production wells in the field. The tracer tests and changes in production behavior indicate the additional production wells monitored during the field trial were also affected. Eighty two and one half barrels (13.1 m[sup 3]) of tertiary oil have been recovered. Microbial activity has increased CO[sub 2] content as indicated by increased alkalinity. A temporary rise in sulfide concentration was experienced. These indicate an active microbial community was generated in the field by the nutrient injection. Pilot area interwell pressure interference test results showed that significant permeability reduction occurred. The interwell permeabilities in the pilot area between the injector and the three pilot production wells were made more uniform which indicates a successful preferential plugging enhanced oil recovery project.

Knapp, R.M.; McInerney, M.J.; Menzie, D.E.; Coates, J.D.; Chisholm, J.L.

1993-05-01T23:59:59.000Z

68

Microbial field pilot study  

SciTech Connect (OSTI)

Studies were performed enhanced oil recovery field pilot was performed in Southeast Vassar Vertz Sand Unit (SEVVSU) in Payne County, Oklahoma. The primary emphasis of the experiment was preferential plugging of high permeability zones for the purpose of improving waterflood sweep efficiency. Studies were performed to determine reservoir chemistry, ecology, and indigenous bacteria populations. Studies were performed to determine a nutrient system to encourage growth of a group of indigenous nitrate-using bacteria an inhibit growth of sulfate-reducing bacteria. A specific field pilot area behind an active line drive waterflood was selected. Surface facilities were designed and installed. Injection protocols of bulk nutrient material were prepared to facilitate uniform distribution of nutrients within the pilot area. By the end of December, 1991, 82.5 tons of nutrients had been injected in the field. A tracer test identified significant heterogeneity in the SEVVSU and made it necessary to monitor an additional production well in the field. The tracer tests and changes in production behavior indicated the additional production well monitored during the field trial was also affected. Eighty two and one half barrels of tertiary oil was recovered. Microbial activity increased CO[sub 2] content as indicated by increased alkalinity. A temporary rise in sulphide concentration was experienced. These observations indicate that an active microbial community was generated in the field by the nutrient injection. The three production wells monitored in the pilot area demonstrated significant permeability reduction indicated by interwell pressure interference tests. The interwell permeabilities in the pilot area between the injector and the three pilot production wells were made more uniform (15 md maximum difference between post-treatment permeability values) indicating that preferential plugging had occurred.

Chisholm, J.L.

1992-01-01T23:59:59.000Z

69

Acceptance test report, 241-AW air inlet filter station pressure decay test  

SciTech Connect (OSTI)

This is the acceptance test report for pressure decay tests performed on newly-installed 241-AW Tank Farm primary ventilation system air inlet filter stations.

Tuck, J.A.

1996-02-21T23:59:59.000Z

70

Fuel control for gas turbine with continuous pilot flame  

DOE Patents [OSTI]

An improved fuel control for a gas turbine engine having a continuous pilot flame and a fuel distribution system including a pump drawing fuel from a source and supplying a line to the main fuel nozzle of the engine, the improvement being a control loop between the pump outlet and the pump inlet to bypass fuel, an electronically controlled throttle valve to restrict flow in the control loop when main nozzle demand exists and to permit substantially unrestricted flow without main nozzle demand, a minimum flow valve in the control loop downstream of the throttle valve to maintain a minimum pressure in the loop ahead of the flow valve, a branch tube from the pilot flame nozzle to the control loop between the throttle valve and the minimum flow valve, an orifice in the branch tube, and a feedback tube from the branch tube downstream of the orifice to the minimum flow valve, the minimum flow valve being operative to maintain a substantially constant pressure differential across the orifice to maintain constant fuel flow to the pilot flame nozzle.

Swick, Robert M. (Indianapolis, IN)

1983-01-01T23:59:59.000Z

71

ISOE Pilot Project Update  

SciTech Connect (OSTI)

This slide show introduces the Pilot Project to increase the value of Information System on Occupational Exposure (ISOE)#11;data by increasing participation and amount of data reported from the U.S., reduce the hurdles and effort in participating, streamline the process of reporting and reduce time delay, and eliminate data entry and redundant effort.

D. A. Hagemeyer D. E. Lewis

2012-05-05T23:59:59.000Z

72

Mass independent kinetic energy reducing inlet system for vacuum environment  

DOE Patents [OSTI]

A particle inlet system comprises a first chamber having a limiting orifice for an incoming gas stream and a micrometer controlled expansion slit. Lateral components of the momentum of the particles are substantially cancelled due to symmetry of the configuration once the laminar flow converges at the expansion slit. The particles and flow into a second chamber, which is maintained at a lower pressure than the first chamber, and then moves into a third chamber including multipole guides for electromagnetically confining the particle. The vertical momentum of the particles descending through the center of the third chamber is minimized as an upward stream of gases reduces the downward momentum of the particles. The translational kinetic energy of the particles is near-zero irrespective of the mass of the particles at an exit opening of the third chamber, which may be advantageously employed to provide enhanced mass resolution in mass spectrometry.

Reilly, Peter T.A.

2014-05-13T23:59:59.000Z

73

Mass independent kinetic energy reducing inlet system for vacuum environment  

DOE Patents [OSTI]

A particle inlet system comprises a first chamber having a limiting orifice for an incoming gas stream and a micrometer controlled expansion slit. Lateral components of the momentum of the particles are substantially cancelled due to symmetry of the configuration once the laminar flow converges at the expansion slit. The particles and flow into a second chamber, which is maintained at a lower pressure than the first chamber, and then moves into a third chamber including multipole guides for electromagnetically confining the particle. The vertical momentum of the particles descending through the center of the third chamber is minimized as an upward stream of gases reduces the downward momentum of the particles. The translational kinetic energy of the particles is near-zero irrespective of the mass of the particles at an exit opening of the third chamber, which may be advantageously employed to provide enhanced mass resolution in mass spectrometry.

Reilly, Peter T. A. [Knoxville, TN

2010-12-14T23:59:59.000Z

74

Mass independent kinetic energy reducing inlet system for vacuum environment  

DOE Patents [OSTI]

A particle inlet system comprises a first chamber having a limiting orifice for an incoming gas stream and a micrometer controlled expansion slit. Lateral components of the momentum of the particles are substantially cancelled due to symmetry of the configuration once the laminar flow converges at the expansion slit. The particles and flow into a second chamber, which is maintained at a lower pressure than the first chamber, and then moves into a third chamber including multipole guides for electromagnetically confining the particle. The vertical momentum of the particles descending through the center of the third chamber is minimized as an upward stream of gases reduces the downward momentum of the particles. The translational kinetic energy of the particles is near-zero irrespective of the mass of the particles at an exit opening of the third chamber, which may be advantageously employed to provide enhanced mass resolution in mass spectrometry.

Reilly, Peter T.A.

2013-12-03T23:59:59.000Z

75

Tidal interactions in multi-planet systems  

E-Print Network [OSTI]

We study systems of close orbiting planets evolving under the influence of tidal circularization. It is supposed that a commensurability forms through the action of disk induced migration and orbital circularization. After the system enters an inner cavity or the disk disperses the evolution continues under the influence of tides due to the central star which induce orbital circularization. We derive approximate analytic models that describe the evolution away from a general first order resonance that results from tidal circularization in a two planet system and which can be shown to be a direct consequence of the conservation of energy and angular momentum. We consider the situation when the system is initially very close to resonance and also when the system is between resonances. We also perform numerical simulations which confirm these models and then apply them to two and four planet systems chosen to have parameters related to the GJ581 and HD10180 systems. We also estimate the tidal dissipation rates t...

Papaloizou, J C B

2011-01-01T23:59:59.000Z

76

The effects of inlet velocity and barrel diameter on cyclone performance  

E-Print Network [OSTI]

geometric proportions. The Texas A&M Cyclone Design (TCD) method is a simple method for designing cyclones based on an inlet design velocity. The TCD method specifies �ideal� inlet velocities of 975 ± 120 m/min (3200 ± 400 fpm) and 914 ± 120 m/min (3000...

Faulkner, William Brock

2006-08-16T23:59:59.000Z

77

Regulation of Tidal and Wave Energy Projects (Maine)  

Broader source: Energy.gov [DOE]

State regulation of tidal and wave energy projects is covered under the Maine Waterway Development and Conservation Act (MWDCA), and complements regulation by the Federal Energy Regulation...

78

Temperature and Tidal Dynamics in a Branching Estuarine System  

E-Print Network [OSTI]

Importance of the Interconnectivity of Branching ChannelsImportance of the Interconnectivity of Branching Channels Inquestions about tidal interconnectivity in the Sacramento-

Wagner, Richard Wayne

2012-01-01T23:59:59.000Z

79

Assessment of Energy Production Potential from Tidal Streams...  

Office of Environmental Management (EM)

technology. 1023527.pdf More Documents & Publications EA-1949: FERC Draft Environmental Assessment EA-1949: FERC Final Environmental Assessment Tidal Energy Resource Assessment...

80

Consolidation of geologic studies of geopressured-geothermal resources in Texas: Barrier-bar tidal-channel reservoir facies architecture, Jackson Group, Prado field, South Texas; Final report  

SciTech Connect (OSTI)

Sandstone reservoirs in the Jackson barrier/strandplain play are characterized by low recovery efficiencies and thus contain a large hydrocarbon resource target potentially amenable to advanced recovery techniques. Prado field, Jim Hogg County, South Texas, has produced over 23 million bbl of oil and over 32 million mcf gas from combination structural-stratigraphic traps in the Eocene lower Jackson Group. Hydrocarbon entrapment at Prado field is a result of anticlinal nosing by differential compaction and updip pinch-out of barrier bar sandstone. Relative base-level lowering resulted in forced regression that established lower Jackson shoreline sandstones in a relatively distal location in central Jim Hogg County. Reservoir sand bodies at Prado field comprise complex assemblages of barrier-bar, tidal-inlet fill, back-barrier bar, and shoreface environments. Subsequent progradation built the barrier-bar system seaward 1 to 2 mi. Within the barrier-bar system, favorable targets for hydrocarbon reexploration are concentrated in tidal-inlet facies because they possess the greatest degree of depositional heterogeneity. The purpose of this report is (1) to describe and analyze the sand-body architecture, depositional facies variations, and structure of Prado field, (2) to determine controls on distribution of hydrocarbons pertinent to reexploration for bypassed hydrocarbons, (3) to describe reservoir models at Prado field, and (4) to develop new data affecting the suitability of Jackson oil fields as possible candidates for thermally enhanced recovery of medium to heavy oil.

Seni, S.J.; Choh, S.J.

1994-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "inlet pilot tidal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

PILOT: design and capabilities  

E-Print Network [OSTI]

The proposed design for PILOT is a general-purpose, wide-field 1 degree 2.4m, f/10 Ritchey-Chretien telescope, with fast tip-tilt guiding, for use 0.5-25 microns. The design allows both wide-field and diffraction-limited use at these wavelengths. The expected overall image quality, including median seeing, is 0.28-0.3" FWHM from 0.8-2.4 microns. Point source sensitivities are estimated.

W. Saunders; P. R. Gillingham; A. J. McGrath; J. W. V. Storey; J. S. Lawrence

2008-01-29T23:59:59.000Z

82

Microbial field pilot study  

SciTech Connect (OSTI)

The objective of this project is to perform a microbially enhanced oil recovery field pilot test in the Southeast Vassar Vertz Sand Unit in Payne County, Oklahoma. Indigenous, anaerobic, nitrate-reducing bacteria will be stimulated to selectively plug flow paths which have been preferentially swept by a prior waterflood. This will force future flood water to invade bypassed regions of the reservoir and increase sweep efficiency. 1 fig., 2 tabs.

Knapp, R.M.; McInerney, M.J.; Menzie, D.E.

1991-01-01T23:59:59.000Z

83

Pilot Scale Tests Alden/Concepts NREC Turbine  

SciTech Connect (OSTI)

Alden Research Laboratory, Inc. has completed pilot scale testing of the new Alden/Concepts NREC turbine that was designed to minimize fish injury at hydropower projects. The test program was part of the U.S. Department of Energy's Advanced Hydropower Turbine Systems Program. The prototype turbine operating point was 1,000 cfs at 80ft head and 100 rpm. The turbine was design to: (1) limit peripheral runner speed; (2) have a high minimum pressure; (3) limit pressure change rates; (4) limit the maximum flow shear; (5) minimize the number and total length of leading blade edges; (6) maximize the distance between the runner inlet and the wicket gates and minimize clearances (i.e., gaps) between other components; and (7) maximize the size of flow passages.

Thomas C. Cook; George E.Hecker; Stephen Amaral; Philip Stacy; Fangbiao Lin; Edward Taft

2003-09-30T23:59:59.000Z

84

Kentucky WRI Pilot Test Universal ID  

E-Print Network [OSTI]

Kentucky WRI Pilot Test ­ Universal ID Commercial Motor Vehicle Roadside Technology Corridor Safety Universal ID Pilot TestKentucky Pilot Test #12;Kentucky Pilot Test (Not to Scale) Sorter WIM USDOT Reader >>>> Park/Proceed Signs Mainline >>>> #12;Kentucky Pilot Test · Information is captured from the commercial

85

THE EFFECT OF MASS LOSS ON THE TIDAL EVOLUTION OF EXTRASOLAR PLANET  

E-Print Network [OSTI]

By combining mass loss and tidal evolution of close-in planets, we present a qualitative study on their tidal migrations. We incorporate mass loss in tidal evolution for planets with different masses and find that mass ...

Guo, Jianheng

86

MHK Technologies/Uldolmok Pilot Tidal Current Power Plant | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpIncMAKGalway Bay IEOWC <SurgeWECSailsOWC.png TechnologyUFCAP

87

Tocardo Tidal Energy Ltd | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revisionEnvReviewNonInvasiveExplorationUT-gTaguspark JumpDetective: Terminology andInformationTocardo Tidal

88

Tidal Energy Resource Assessment | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up from theDepartment of EnergyThe Sun and Its EnergyMetalofAgreement forTidal Energy

89

Tidal Energy Test Platform | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ < RAPID Jump to:Seadov Pty LtdSteen,Ltd Jump JumpAl., 1978) |Thrall,Tibagi Energetica Jump to:TidalTest

90

Environmental Effects of Sediment Transport Alteration and Impacts on Protected Species: Edgartown Tidal Energy Project  

SciTech Connect (OSTI)

The Islands of Martha�¢����s Vineyard and Nantucket are separated from the Massachusetts mainland by Vineyard and Nantucket Sounds; water between the two islands flows through Muskeget Channel. The towns of Edgartown (on Martha�¢����s Vineyard) and Nantucket recognize that they are vulnerable to power supply interruptions due to their position at the end of the power grid, and due to sea level rise and other consequences of climate change. The tidal energy flowing through Muskeget Channel has been identified by the Electric Power Research Institute as the strongest tidal resource in Massachusetts waters. The Town of Edgartown proposes to develop an initial 5 MW (nameplate) tidal energy project in Muskeget Channel. The project will consist of 14 tidal turbines with 13 providing electricity to Edgartown and one operated by the University of Massachusetts at Dartmouth for research and development. Each turbine will be 90 feet long and 50 feet high. The electricity will be brought to shore by a submarine cable buried 8 feet below the seabed surface which will landfall in Edgartown either on Chappaquiddack or at Katama. Muskeget Channel is located between Martha�¢����s Vineyard and Nantucket. Its depth ranges between 40 and 160 feet in the deepest portion. It has strong currents where water is transferred between Nantucket Sound and the Atlantic Ocean continental shelf to the south. This makes it a treacherous passage for navigation. Current users of the channel are commercial and recreational fishing, and cruising boats. The US Coast Guard has indicated that the largest vessel passing through the channel is a commercial scallop dragger with a draft of about 10 feet. The tidal resource in the channel has been measured by the University of Massachusetts-Dartmouth and the peak velocity flow is approximately 5 knots. The technology proposed is the helical Gorlov-type turbine positioned with a horizontal axis that is positively buoyant in the water column and held down by anchors. This is the same technology proposed by Ocean Renewable Power Company in the Western Passage and Cobscook Bay near Eastport Maine. The blades rotate in two directions capturing the tides energy both during flood and ebb tides. The turbines will be anchored to the bottom and suspended in the water column. Initial depth of the turbines is expected to be about 25 feet below the surface to avoid impacting navigation while also capturing the strongest currents. The Town of Edgartown was initially granted a Preliminary Permit by the Federal Energy Regulatory Commission (FERC) on March 1, 2008, and has recently received a second permit valid through August 2014. The Preliminary Permit gives Edgartown the exclusive right to apply for a power generation license for power generated from the hydrokinetic energy in the water flowing in this area. Edgartown filed a Draft Pilot License Application with FERC on February 1, 2010 and an Expanded Environmental Notification Form with the Massachusetts Environmental Policy Act (MEPA) Office at the same time. It expects to file a Final License Application in late 2013. Harris Miller Miller & Hanson (HMMH) of Burlington Massachusetts is acting as the Project Manager for the Town of Edgartown and collaborating with other partners of the project including the University of Massachusetts - Dartmouth's Marine Renewable Energy Center and the Massachusetts Clean Energy Center. HMMH was awarded a grant under the Department of Energy's Advanced Water Program to conduct marine science and hydrokinetic site-specific environmental studies for projects actively seeking a FERC License. HMMH, on behalf of the Town, is managing this comprehensive study of the marine environment in Muskeget Channel and potential impacts of the tidal project on indicator species and habitats. The University of Massachusetts School of Marine Science and Technology (SMAST) conducted oceanographic studies of tidal currents, tide level, benthic habit

Barrett, Stephen B.; Schlezinger, David, Ph.D; Cowles, Geoff, Ph.D; Hughes, Patricia; Samimy; Roland, I.; and Terray, E, Ph.D.

2012-12-29T23:59:59.000Z

91

Swozzle based burner tube premixer including inlet air conditioner for low emissions combustion  

DOE Patents [OSTI]

A burner for use in a combustion system of a heavy-duty industrial gas turbine includes a fuel/air premixer having an air inlet, a fuel inlet, and an annular mixing passage. The fuel/air premixer mixes fuel and air into a uniform mixture for injection into a combustor reaction zone. The burner also includes an inlet flow conditioner disposed at the air inlet of the fuel/air premixer for controlling a radial and circumferential distribution of incoming air. The pattern of perforations in the inlet flow conditioner is designed such that a uniform air flow distribution is produced at the swirler inlet annulus in both the radial and circumference directions. The premixer includes a swozzle assembly having a series of preferably air foil shaped turning vanes that impart swirl to the airflow entering via the inlet flow conditioner. Each air foil contains internal fuel flow passages that introduce natural gas fuel into the air stream via fuel metering holes that pass through the walls of the air foil shaped turning vanes. By injecting fuel in this manner, an aerodynamically clean flow field is maintained throughout the premixer. By injecting fuel via two separate passages, the fuel/air mixture strength distribution can be controlled in the radial direction to obtain optimum radial concentration profiles for control of emissions, lean blow outs, and combustion driven dynamic pressure activity as machine and combustor load are varied.

Tuthill, Richard Sterling (Bolton, CT); Bechtel, II, William Theodore (Scotia, NY); Benoit, Jeffrey Arthur (Scotia, NY); Black, Stephen Hugh (Duanesburg, NY); Bland, Robert James (Clifton Park, NY); DeLeonardo, Guy Wayne (Scotia, NY); Meyer, Stefan Martin (Troy, NY); Taura, Joseph Charles (Clifton Park, NY); Battaglioli, John Luigi (Glenville, NY)

2002-01-01T23:59:59.000Z

92

Means for positively seating a piezoceramic element in a piezoelectric valve during inlet gas injection  

DOE Patents [OSTI]

A piezoelectric valve in a gas delivery system includes a piezoceramic element bonded to a valve seal and disposed over a valve seat, and retained in position by an O-ring and a retainer; an insulating ball normally biased by a preload spring against the piezoceramic element; an inlet gas port positioned such that upon admission of inlet gas into the valve, the piezoceramic element is positively seated. The inlet gas port is located only on the side of the piezoceramic element opposite the seal. 3 figs.

Wright, K.E.

1994-08-23T23:59:59.000Z

93

Means for positively seating a piezoceramic element in a piezoelectric valve during inlet gas injection  

DOE Patents [OSTI]

A piezoelectric valve in a gas delivery system includes a piezoceramic element bonded to a valve seal and disposed over a valve seat, and retained in position by an O-ring and a retainer; an insulating ball normally biased by a preload spring against the piezoceramic element; an inlet gas port positioned such that upon admission of inlet gas into the valve, the piezoceramic element is positively seated. The inlet gas port is located only on the side of the piezoceramic element opposite the seal.

Wright, Kenneth E. (Yardley, PA)

1994-01-01T23:59:59.000Z

94

Microbial field pilot study  

SciTech Connect (OSTI)

The objective of this project is to perform a microbial enhanced oil recovery field pilot in the Southeast Vassar Vertz Sand Unit (SEVVSU) in Payne County, Oklahoma. Indigenous, anaerobic, nitrate reducing bacteria will be stimulated to selectively plug flow paths which have been referentially swept by a prior waterflood. This will force future flood water to invade bypassed regions of the reservoir and increase sweep efficiency. This report covers progress made during the second year, January 1, 1990 to December 31, 1990, of the Microbial Field Pilot Study project. Information on reservoir ecology, surface facilities design, operation of the unit, core experiments, modeling of microbial processes, and reservoir characterization and simulation are presented in the report. To better understand the ecology of the target reservoir, additional analyses of the fluids which support bacteriological growth and the microbiology of the reservoir were performed. The results of the produced and injected water analysis show increasing sulfide concentrations with respect to time. In March of 1990 Mesa Limited Partnership sold their interest in the SEVVSU to Sullivan and Company. In April, Sullivan and Company assumed operation of the field. The facilities for the field operation of the pilot were refined and implementation was begun. Core flood experiments conducted during the last year were used to help define possible mechanisms involved in microbial enhanced oil recovery. The experiments were performed at SEVVSU temperature using fluids and inoculum from the unit. The model described in last year`s report was further validated using results from a core flood experiment. The model was able to simulate the results of one of the core flood experiments with good quality.

Knapp, R.M.; McInerney, M.J.; Menzie, D.E.; Chisholm, J.L.

1992-03-01T23:59:59.000Z

95

Microbial field pilot study  

SciTech Connect (OSTI)

The objective of this project is to perform a microbial enhanced oil recovery field pilot in the Southeast Vassar Vertz Sand Unit (SEVVSU) in Payne County, Oklahoma. Indigenous, anaerobic, nitrate reducing bacteria will be stimulated to selectively plug flow paths which have been referentially swept by a prior waterflood. This will force future flood water to invade bypassed regions of the reservoir and increase sweep efficiency. This report covers progress made during the second year, January 1, 1990 to December 31, 1990, of the Microbial Field Pilot Study project. Information on reservoir ecology, surface facilities design, operation of the unit, core experiments, modeling of microbial processes, and reservoir characterization and simulation are presented in the report. To better understand the ecology of the target reservoir, additional analyses of the fluids which support bacteriological growth and the microbiology of the reservoir were performed. The results of the produced and injected water analysis show increasing sulfide concentrations with respect to time. In March of 1990 Mesa Limited Partnership sold their interest in the SEVVSU to Sullivan and Company. In April, Sullivan and Company assumed operation of the field. The facilities for the field operation of the pilot were refined and implementation was begun. Core flood experiments conducted during the last year were used to help define possible mechanisms involved in microbial enhanced oil recovery. The experiments were performed at SEVVSU temperature using fluids and inoculum from the unit. The model described in last year's report was further validated using results from a core flood experiment. The model was able to simulate the results of one of the core flood experiments with good quality.

Knapp, R.M.; McInerney, M.J.; Menzie, D.E.; Chisholm, J.L.

1992-03-01T23:59:59.000Z

96

Independent Oversight Inspection, Waste Isolation Pilot Plant...  

Energy Savers [EERE]

Independent Oversight Inspection, Waste Isolation Pilot Plant, Summary Report - August 2002 Independent Oversight Inspection, Waste Isolation Pilot Plant, Summary Report - August...

97

Oversight Reports - Waste Isolation Pilot Plant | Department...  

Broader source: Energy.gov (indexed) [DOE]

Waste Isolation Pilot Plant - December 2007 Inspection of Emergency Management at the Carlsbad Field Office and Waste Isolation Pilot Plant October 2, 2002 Independent Oversight...

98

Microbial field pilot study  

SciTech Connect (OSTI)

The objective of this project is to perform a microbially enhanced oil recovery field pilot test in the Southeast Vassar Vertz Sand Unit (SEVVSU) in Payne County, Oklahoma. Indigenous, anaerobic, nitrate-reducing bacteria will be stimulated to selectively plug flow paths which have been preferentially swept by a prior waterflood. This will force future flood water to invade bypassed regions of the reservoir and increase sweep efficiency. Results are reported on the isolation/characterization of anaerobic bacteria; bacterial mobility and the importance of chemotaxis; careflood experiments; microbial modeling; and surface facilities design. 7 figs., 1 tab.

Knapp, R.M.; McInerney, M.J.; Menzie, D.E.; Chisholm, J.L.

1990-05-02T23:59:59.000Z

99

Microbial field pilot study  

SciTech Connect (OSTI)

The objective of this project is to perform a microbially enhanced oil recovery field pilot test in the Southeast Vassar Vertz Sand Unit (SEVVSU) in Payne County, Oklahoma. Indigenous, anaerobic, nitrate-reducing bacteria will be stimulated to selectively plug flow paths which have been preferentially swept by a prior waterflood. This will force future flood water to invade bypassed regions of the reservoir and increase sweep efficiency. Progress is reported on growth/activity in porous media; coreflooding; and microbial modeling. 3 refs., 5 figs.

Knapp, R.M.; McInerney, M.J.; Menzie, D.E.; Chisholm, J.L.

1990-05-01T23:59:59.000Z

100

Microbial field pilot study  

SciTech Connect (OSTI)

The objective of this project is to perform a microbial enhanced oil recovery field pilot test in the Southeast Vassar Vertz Sand Unit (SEVVSU) in Payne County, Oklahoma. Indigenous, anaerobic, nitrate-reducing bacteria will be stimulated to selectively plug flow paths which have been preferentially swept by a prior waterflood. This will force future flood water to invade bypassed regions of the reservoir and increase sweep efficiency. During this quarter an additional tracer study was performed in the field to determine pre-treatment flow paths and the first nutrients were injected. 2 figs.

Knapp, R.M.; McInerney, M.J.; Menzie, D.E.

1991-12-06T23:59:59.000Z

Note: This page contains sample records for the topic "inlet pilot tidal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

March 22, 2004 EAS 4/8803 1 Separating PM2.5 at Sample Inlet  

E-Print Network [OSTI]

March 22, 2004 EAS 4/8803 1 Separating PM2.5 at Sample Inlet Classical Cyclone Sharp Cut Cyclone medium is extracted separately for direct quantification of: NH3, HONO, HNO3, SO2, Formic, Acetic, Oxalic

Weber, Rodney

102

Nuclear reactor fuel assembly duct-tube-to-inlet-nozzle attachment system  

DOE Patents [OSTI]

A reusable system for removably attaching the lower end 21 of a nuclear reactor fuel assembly duct tube to an upper end 11 of a nuclear reactor fuel assembly inlet nozzle. The duct tube's lower end 21 has sides terminating in locking tabs 22 which end in inwardly-extending flanges 23. The flanges 23 engage recesses 13 in the top section 12 of the inlet nozzle's upper end 11. A retaining collar 30 slides over the inlet nozzle's upper end 11 to restrain the flanges 23 in the recesses 13. A locking nut 40 has an inside threaded portion 41 which engages an outside threaded portion 15 of the inlet nozzle's upper end 11 to secure the retaining collar 30 against protrusions 24 on the duct tube's sides.

Christiansen, David W. (Kennewick, WA); Smith, Bob G. (Kennewick, WA)

1982-01-01T23:59:59.000Z

103

Disc formation from stellar tidal disruptions  

E-Print Network [OSTI]

The potential of tidal disruption of stars to probe otherwise quiescent supermassive black holes cannot be exploited, if their dynamics is not fully understood. So far, the observational appearance of these events has been commonly derived from analytical extrapolations of the debris dynamical properties just after the stellar disruption. In this paper, we perform hydrodynamical simulations of stars in highly eccentric orbits, that follow the stellar debris after disruption and investigate their ultimate fate. We demonstrate that gas debris circularize on an orbital timescale because relativistic apsidal precession causes the stream to self-cross. The higher the eccentricity and/or the deeper the encounter, the faster is the circularization. If the internal energy deposited by shocks during stream self-interaction is readily radiated, the gas forms a narrow ring at the circularization radius. It will then proceed to accrete viscously at a super-Eddington rate, puffing up under radiation pressure. If instead c...

Bonnerot, Clément; Lodato, Giuseppe; Price, Daniel J

2015-01-01T23:59:59.000Z

104

Portland General Electric Co. Pilot Evaluation and  

E-Print Network [OSTI]

capability to support the utility's control of residential customers' central electric space heating systems DIRECT LOAD CONTROL PILOT FOR ELECTRIC SPACE HEAT #12;Direct Load Control Pilot for Electric Space Heat) an evaluation report of its direct load control pilot for electric space heat, called "Direct Load control Pilot

105

Portland General Electric Company Pilot Evaluation and  

E-Print Network [OSTI]

residential electric water heating systems, and estimate the feasibility of operating a full residential load, 2004 DIRECT LOAD CONTROL PILOT FOR ELECTRIC WATER HEAT #12;1 PGE Direct Load Control Pilot for Electric direct load control pilot for electric water heat, called "Direct Load Control Pilot for Electric Water

106

Biochemical Conversion Pilot Plant (Fact Sheet)  

SciTech Connect (OSTI)

This fact sheet provides information about Biochemical Conversion Pilot Plant capabilities and resources at NREL.

Not Available

2012-06-01T23:59:59.000Z

107

Pilot Plant Options for the MFE Roadmap  

E-Print Network [OSTI]

Pilot Plant Options for the MFE Roadmap Hutch Neilson Princeton Plasma Physics Laboratory International Workshop MFE Roadmapping for the ITER Era Princeton, NJ 10 September 2011 #12;Outline 2 · Pilot plant ­ mission, motivation, and description. · Role of pilot plants on the Roadmap to Demo. Pilot Plant

108

Microbial field pilot study  

SciTech Connect (OSTI)

The objective of this project is to perform a microbially enhanced oil recovery field pilot test in the Southeast Vassar Vertz Sand Unit (SEVVSU) in Payne County, Oklahoma. Indigenous, anaerobic, nitrate-reducing bacteria will be stimulated to selectively plug flow paths which have been preferentially swept by a prior waterflood. This will force future flood water to invade bypassed regions or the reservoir and increase sweep efficiency. Injection of nutrient stimulates the growth and metabolism of reservoir bacteria, which produces beneficial products to enhance oil recovery. Sometimes, chemical treatments are used to clean or condition injection water. Such a chemical treatment has been initiated by Sullivan and Company at the Southeast Vassar Vertz Sand Unit. The unit injection water was treated with a mixture of water, methanol, isopropyl alcohol, and three proprietary chemicals. To determine if the chemicals would have an impact on the pilot, it was important to determine the effects of the chemical additives on the growth and metabolism of the bacteria from wells in this field. Two types of media were used: a mineral salts medium with molasses and nitrate, and this medium with 25 ppm of the treatment chemicals added. Samples were collected anaerobically from each of two wells, 1A-9 and 7-2. A sample from each well was inoculated and cultured in the broth tubes of molasses-nitrate medium with and without the chemicals. Culturing temperature was 35{degrees}C. Absorbance, pressure and cell number were checked to determine if the chemicals affected the growth and metabolism of bacteria in the brine samples. 12 figs.

Knapp, R.M.; McInerney, M.J.; Menzie, D.E.

1991-01-01T23:59:59.000Z

109

analysing tidally induced: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Tidally-induced thermonuclear Supernovae Astrophysics (arXiv) Summary: We discuss the results of 3D simulations...

110

Hydrodynamic analysis of a vertical axis tidal current turbine   

E-Print Network [OSTI]

Tidal currents can be used as a predictable source of sustainable energy, and have the potential to make a useful contribution to the energy needs of the UK and other countries with such a resource. One of the technologies ...

Gretton, Gareth I.

2009-01-01T23:59:59.000Z

111

Geomorphic structure of tidal hydrodynamics in salt marsh creeks  

E-Print Network [OSTI]

of the tidal signal within the marsh area. Citation: Fagherazzi, S., M. Hannion, and P. D'Odorico (2008 by elegant hydrological and geomorphological theories [Gupta et al., 1980; Rodriguez-Iturbe and Valdes, 1979

Fagherazzi, Sergio

112

Nonrotating black hole in a post-Newtonian tidal environment  

E-Print Network [OSTI]

We examine the motion and tidal dynamics of a nonrotating black hole placed within a post-Newtonian external spacetime. The tidal perturbation created by the external environment is treated as a small perturbation. At a large distance from the black hole, the gravitational field of the external distribution of matter is assumed to be sufficiently weak to be adequately described by the (first) post-Newtonian approximation to general relativity. There, the black hole is treated as a monopole contribution to the total gravitational field. There exists an overlap in the domains of validity of each description, and the black-hole and post-Newtonian metrics are matched in the overlap. The matching procedure produces the equations of motion for the black hole and the gravito-electric and gravito-magnetic tidal fields acting on the black hole. We first calculate the equations of motion and tidal fields by making no assumptions regarding the nature of the post-Newtonian environment; this could contain a continuous distribution of matter or any number of condensed bodies. We next specialize our discussion to a situation in which the black hole is a member of a post-Newtonian two-body system. As an application of our results, we examine the geometry of the deformed event horizon and calculate the tidal heating of the black hole, the rate at which it acquires mass as a result of its tidal interaction with the companion body.

Stephanne Taylor; Eric Poisson

2008-09-11T23:59:59.000Z

113

Commercial Building Energy Asset Score: 2013 Pilot Overview ...  

Office of Environmental Management (EM)

Score: 2013 Pilot Overview Commercial Building Energy Asset Score: 2013 Pilot Overview provides an overview of the 2013 pilot for the commercial building energy asset score...

114

Commercial Building Energy Asset Scoring Tool 2013 Pilot Training...  

Office of Environmental Management (EM)

Scoring Tool 2013 Pilot Training Session Commercial Building Energy Asset Scoring Tool 2013 Pilot Training Session overview of the June 18, 2013 pilot training session for the...

115

Biases in Ion Transmission Through an Electrospray Ionization-Mass Spectrometry Capillary Inlet  

SciTech Connect (OSTI)

The standard heated capillary inlet of an electrospray ionization mass spectrometry (ESI-MS) interface was compared with shorter versions of the inlet to determine the effects on transmission and ionization efficiencies for low-flow electrosprays. The primary finding of the study was a large bias towards higher mobility species in the electrospray current losses to the inside walls of the inlet. The transmission efficiency increased with decreasing capillary length due to reduced losses along the capillary. A decrease in transmission efficiency was also confirmed for electrosprays of higher conductivity solvents. A direct correlation between mass spectrometry sensitivity and the transmitted electrospray current was not observed as some analytes showed little to no increase in sensitivity while others showed as high as a 15 – fold increase. The variation was shown to at least be partially dependent on the analytes’ mobilities. Higher mobility analytes demonstrated a larger increase in sensitivity when shorter inlets were used. The results indicate that considerable biases against higher mobility species can be produced by the use of long capillary inlets in the ESI-MS interface and strategies are provided to minimize the bias against higher mobility species for efficient ion transmission through the heated capillary interface.

Page, Jason S.; Marginean, Ioan; Baker, Erin Shammel; Kelly, Ryan T.; Tang, Keqi; Smith, Richard D.

2009-12-01T23:59:59.000Z

116

A comparative assessment of alternative combustion turbine inlet air cooling system  

SciTech Connect (OSTI)

Interest in combustion turbine inlet air cooling (CTAC) has increased during the last few years as electric utilities face increasing demand for peak power. Inlet air cooling increases the generating capacity and decreases the heat rate of a combustion turbine during hot weather when the demand for electricity is generally the greatest. Several CTAC systems have been installed, but the general applicability of the concept and the preference for specific concepts is still being debated. Concurrently, Rocky Research of Boulder City, Nevada has been funded by the U.S. Department of Energy to conduct research on complex compound (ammoniated salt) chiller systems for low-temperature refrigeration applications.

Brown, D.R.; Katipamula, S.; Konynenbelt, J.H.

1996-02-01T23:59:59.000Z

117

Engineering geology of a mudslide at Bracebridge Inlet, Bathurst Island, Northwest Territories, Canada  

E-Print Network [OSTI]

ON 'QNb'1SI LS'dllHl'dG J3 INI 3BQI'dG3'JddG l'd 30I 1SQAH O' 30 AB0103B BNIG33NIBN3 ENGINEERING GEOLOGY OF A MUDSLIDE AT BRACEBRIDGE INLET, BATHURST ISLAND, NORTHWEST TERRITORIES, CANADA A Thesis by TERRY ANN MAYER Approved as to style and content... by: C irman of Committee Member Member He epar, ment December 1980 ABSTRACT Engineering Geology of a, "1udslide at Bracebridge Inlet, , Bathurst Island, northwest Terrftor1es, Canada Terry Ann Payer, B. A. , San Francisco State University...

Mayer, Terry Ann

1980-01-01T23:59:59.000Z

118

Using Tidal Tails to Probe Dark Matter Halos  

E-Print Network [OSTI]

We use simulations of merging galaxies to explore the sensitivity of the morphology of tidal tails to variations of the halo mass distributions in the parent galaxies. Our goal is to constrain the mass of dark halos in well-known merging pairs. We concentrate on prograde encounters between equal mass galaxies which represent the best cases for creating tidal tails, but also look at systems with different relative orientations, orbital energies and mass ratios. As the mass and extent of the dark halo increase in the model galaxies, the resulting tidal tails become shorter and less massive, even under the most favorable conditions for producing these features. Our simulations imply that the observed merging galaxies with long tidal tails ($\\sim 50-100$ kpc) such as NGC 4038/39 (the Antennae) and NGC 7252 probably have halo:disk+bulge mass ratios less than 10:1. These results conflict with the favored values of the dark halo mass of the Milky Way derived from satellite kinematics and the timing argument which give a halo:disk+bulge mass ratio of $\\sim 30:1$. However, the lower bound of the estimated dark halo mass in the Milky Way (mass ratio $\\sim 10:1$) is still consistent with the inferred tidal tail galaxy masses. Our results also conflict with the expectations of $\\Omega=1$ cosmologies such as CDM which predict much more massive and extended dark halos.

John Dubinski; J. Christopher Mihos; Lars Hernquist

1995-09-04T23:59:59.000Z

119

Decision support for the general aviation pilot  

E-Print Network [OSTI]

of ATC procedures, aircraft operating procedures and limitations, and aircraft performance to infer current flight operating “mode” without direct pilot intervention or input. A flight mode interpreter (FMI) enables automatic display selection, pilot...

Alcorn, W. P.; Lee, K. A.; Ward, D. T.; Trang, J. A.; Krishnamurthy, K.; Crump, J. W.; Branham, P. A.; Woo, D. L. Y.; Ren-Jye Yu; Robbins, A. C.; Painter, John H.; Kelly, W. E. III

1997-10-12T23:59:59.000Z

120

Biomedical Collaborative Pilot Grants The Harvard Catalyst Pilot Grants Program sponsored three cycles of Biomedical Collaborative  

E-Print Network [OSTI]

Biomedical Collaborative Pilot Grants Cycle 2 The Harvard Catalyst Pilot Grants Program sponsored three cycles of Biomedical Collaborative Pilot Grants, which were directed at improving human health project. Funding decisions for the second cycle of Biomedical Collaborative Pilot Grants were announced

Church, George M.

Note: This page contains sample records for the topic "inlet pilot tidal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Biomedical Collaborative Pilot Grants The Harvard Catalyst Pilot Grants Program sponsored three cycles of Biomedical Collaborative  

E-Print Network [OSTI]

Biomedical Collaborative Pilot Grants Cycle 1 The Harvard Catalyst Pilot Grants Program sponsored three cycles of Biomedical Collaborative Pilot Grants, which were directed at improving human health project. Funding decisions for the first cycle of Biomedical Collaborative Pilot Grants were announced

Church, George M.

122

Biomedical Collaborative Pilot Grants The Harvard Catalyst Pilot Grants Program sponsored three cycles of Biomedical Collaborative  

E-Print Network [OSTI]

Biomedical Collaborative Pilot Grants Cycle 3 The Harvard Catalyst Pilot Grants Program sponsored three cycles of Biomedical Collaborative Pilot Grants, which were directed at improving human health project. Funding decisions for the third cycle of Biomedical Collaborative Pilot Grants were announced

Church, George M.

123

A Computational Study of Icing Effects on the Performance of an S-Duct Inlet  

E-Print Network [OSTI]

............................................................................ 27 Figure 3. 4. 1: Total pressure distortion patterns ........................................................ 31 Figure 3. 4. 2: Compressor map with inlet total pressure distortion ........................... 31 Figure 3. 4. 3: Critical... circumferential extent of the spoiled sector with maxim loss in stall pressure ratio................................................................................ 31 Figure 3. 5. 1: Impact of spatial temperature distortion on compressor stall .............. 34...

Jin, Wonjin

2009-01-01T23:59:59.000Z

124

Polystyrene PS648 inlet optical birefringence pattern, piston speed 1.4mm/s  

E-Print Network [OSTI]

The optical birefringence pattern obtained from polystyrene PS648 flowing through a narrow slit. Experiment conducted on the Cambridge Multi Pass Rheometer (MPR4) at a piston speed of 1.4 mm/s at 170C. Video shows the inlet flow (from bottom to top)....

Hassell, David

2008-08-27T23:59:59.000Z

125

Polystyrene PS648 inlet optical birefringence pattern, piston speed 1.0mm/s  

E-Print Network [OSTI]

The optical birefringence pattern obtained from polystyrene PS648 flowing through a narrow slit. Experiment conducted on the Cambridge Multi Pass Rheometer (MPR4) at a piston speed of 1.0 mm/s at 170C. Video shows the inlet flow (from bottom to top)....

Hassell, David

2008-08-27T23:59:59.000Z

126

Polystyrene PS648 inlet optical birefringence pattern, piston speed 0.16mm/s  

E-Print Network [OSTI]

The optical birefringence pattern obtained from polystyrene PS648 flowing through a narrow slit. Experiment conducted on the Cambridge Multi Pass Rheometer (MPR4) at a piston speed of 0.16 mm/s at 170C. Video shows the inlet flow (from bottom to top)....

Hassell, David

2008-08-27T23:59:59.000Z

127

AO02 -Aerosol Inlet Design Candidate 44263 Supervisor: Dr. Daniel Peters Word Count:3812  

E-Print Network [OSTI]

are suggested. A field test investigating the size distribution of tyre smoke aerosols from airplane landings is conducted using the suggested designs. No significant tyre smoke is observed despite the designs being of the aerosol must be drawn through an inlet and transported to the collection or mea- surement device

Oxford, University of

128

Comparison of two models of a Double Inlet Miniature Pulse Tube Refrigerator : Part B Electrical Analogy  

E-Print Network [OSTI]

Inlet Pulse Tube Refrigerator is investigated by means of an analogy with an electric circuit) and experiments. The basic formulation of equivalent electronic components is discussed and a few improvements to avoid mechanical vibrations and magnetic fields. Therefore, a third capillary is used to link

Paris-Sud XI, Université de

129

Degree of mixing downstream of rectangular bends and design of an inlet for ambient aerosol  

E-Print Network [OSTI]

version of the AWI-780 L/min unit featured an internal cone, which was removed because the penetration of the AWI-780 without the bottom chamber was higher than that of the Battelle inlet � 81% with the cone while 86% without the cone for around 9.5 µm...

Seo, Youngjin

2006-04-12T23:59:59.000Z

130

Tidal waves as yrast states in transitional nuclei  

E-Print Network [OSTI]

The yrast states of transitional nuclei are described as quadrupole waves running over the nuclear surface, which we call tidal waves. In contrast to a rotor, which generates angular momentum by increasing the angular velocity at approximately constant deformation, a tidal wave generates angular momentum by increasing the deformation at approximately constant angular velocity. The properties of the tidal waves are calculated by means of the cranking model in a microscopic way. The calculated energies and E2 transition probabilities of the yrast states in the transitional nuclides with $Z$= 44, 46, 48 and $N=56, 58, ..., 66$ reproduce the experiment in detail. The nonlinear response of the nucleonic orbitals results in a strong coupling between shape and single particle degrees of freedom.

S. Frauendorf; Y. Gu; J. Sun

2010-02-16T23:59:59.000Z

131

TIDAL DISRUPTION FLARES: THE ACCRETION DISK PHASE  

SciTech Connect (OSTI)

The evolution of an accretion disk, formed as a consequence of the disruption of a star by a black hole, is followed by solving numerically hydrodynamic equations. The present investigation aims to study the dependence of resulting light curves on dynamical and physical properties of such a transient disk during its existence. One of the main results derived from our simulations is that blackbody fits of X-ray data tend to overestimate the true mean disk temperature. In fact, the temperature derived from blackbody fits should be identified with the color X-ray temperature rather than the average value derived from the true temperature distribution along the disk. The time interval between the beginning of the circularization of the bound debris and the beginning of the accretion process by the black hole is determined by the viscous (or accretion) timescale, which also fixes the rising part of the resulting light curve. The luminosity peak coincides with the beginning of matter accretion by the black hole and the late evolution of the light curve depends on the evolution of the debris fallback rate. Peak bolometric luminosities are in the range 10{sup 45}-10{sup 46} erg s{sup -1}, whereas peak luminosities in soft X-rays (0.2-2.0 keV) are typically one order of magnitude lower. The typical timescale derived from our preferred models for the flare luminosity to decay by two orders of magnitude is about 3-4 yr. Predicted soft X-ray light curves reproduce quite well data on galaxies in which a variable X-ray emission possibly related to a tidal event was detected. In the cases of NGC 3599 and IC 3599, data are reproduced well by models defined by a black hole with mass {approx}10{sup 7} M{sub sun} and a disrupted star of about 1 solar mass. The X-ray variation observed in XMMSL1 is consistent with a model defined by a black hole with mass {approx}3 x 10{sup 6} M{sub sun} and a disrupted star of 1 solar mass, while that observed in the galaxy situated in the cluster A1689 is consistent with a model including a black hole of {approx}10{sup 7} M{sub sun} and a disrupted star of {approx}0.5 M{sub sun}.

Montesinos Armijo, Matias; De Freitas Pacheco, Jose A. [Observatoire de la Cote d'Azur, Laboratoire Cassiopee, Universite de Nice Sophia-Antipolis Bd de l'Observatoire, BP 4229, 06304 Nice Cedex 4 (France)

2011-08-01T23:59:59.000Z

132

Resonant Oscillations and Tidal Heating in Coalescing Binary Neutron Stars  

E-Print Network [OSTI]

Tidal interaction in a coalescing neutron star binary can resonantly excite the g-mode oscillations of the neutron star when the frequency of the tidal driving force equals the intrinsic g-mode frequencies. We study the g-mode oscillations of cold neutron stars using recent microscopic nuclear equations of state, where we determine self-consistently the sound speed and Brunt-V\\"ais\\"al\\"a frequency in the nuclear liquid core. The properties of the g-modes associated with the stable stratification of the core depend sensitively on the pressure-density relation as well as the symmetry energy of the dense nuclear matter. The frequencies of the first ten g-modes lie approximately in the range of $10-100$ Hz. Resonant excitations of these g-modes during the last few minutes of the binary coalescence result in energy transfer and angular momentum transfer from the binary orbit to the neutron star. The angular momentum transfer is possible because a dynamical tidal lag develops even in the absence of fluid viscosity. However, since the coupling between the g-mode and the tidal potential is rather weak, the amount of energy transfer during a resonance and the induced orbital phase error are very small. Resonant excitations of the g-modes play an important role in tidal heating of binary neutron stars. Without the resonances, viscous dissipation is effective only when the stars are close to contact. The resonant oscillations result in dissipation at much larger orbital separation. The actual amount of tidal heating depends on the viscosity of the neutron star. Using the microscopic viscosity, we find that the binary neutron stars are heated to a temperature $\\sim 10^8$ K before they come into contact.

Dong Lai

1994-04-25T23:59:59.000Z

133

A Conceptual Restoration Plan and Tidal Hydrology Assessment for Reconnecting Spring Branch Creek to Suisun Marsh, Solano County, California  

E-Print Network [OSTI]

Marsh. UC Berkeley LA 222 Hydrology Term Paper. Orr, M. , S.Restoration Plan and Tidal Hydrology Assessment forthree consists of a tidal hydrology analysis before and

Olson, Jessica J.

2012-01-01T23:59:59.000Z

134

Assessment of Projected Life-Cycle Costs for Wave, Tidal, Ocean...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Assessment of Projected Life-Cycle Costs for Wave, Tidal, Ocean Current, and In-Stream Hydrokinetic Power Assessment of Projected Life-Cycle Costs for Wave, Tidal, Ocean Current,...

135

MHK Projects/Cohansey River Tidal Energy | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpIncMAK Technologies Jump to:BW2 Tidal <CETOCohansey River Tidal

136

TIDAL HEATING OF EXTRASOLAR PLANETS Brian Jackson, Richard Greenberg, and Rory Barnes  

E-Print Network [OSTI]

TIDAL HEATING OF EXTRASOLAR PLANETS Brian Jackson, Richard Greenberg, and Rory Barnes Lunar and gas cleared away, and as the orbits evolved there was substantial tidal heating within the planets. The tidal heating history of each planet may have contributed significantly to the thermal budget governing

Barnes, Rory

137

LOFT as a discovery machine for jetted Tidal Disruption Events  

E-Print Network [OSTI]

This is a White Paper in support of the mission concept of the Large Observatory for X-ray Timing (LOFT), proposed as a medium-sized ESA mission. We discuss the potential of LOFT for the study of jetted tidal disruption events. For a summary, we refer to the paper.

Rossi, E M; Fender, R; Jonker, P; Komossa, S; Paragi, Z; Prandoni, I; Zampieri, L

2015-01-01T23:59:59.000Z

138

Heartbeat Stars and the Ringing of Tidal Pulsations Kelly Hambleton  

E-Print Network [OSTI]

Heartbeat Stars and the Ringing of Tidal Pulsations Kelly Hambleton Andrej Prsa, Don Kurtz, Jim Fuller, Susan Thompson University of Central Lancashire kmhambleton@uclan.ac.uk March 27, 2014 Kelly 3 Summary Conclusions Future Work Kelly Hambleton (UCLan) Heartbeat Stars March 27, 2014 2 / 33 #12

Â?umer, Slobodan

139

Tidal Stage Variability of Fecal Coliform and Chlorophyll a  

E-Print Network [OSTI]

leachates, leaking sewer mains, wild and do- mestic animal wastes, and runo. However, the inter- action environmental hazards, to enter an estuarine environment characterized by high variability regarding temperature to understanding both the basic ecology of tidal creeks and the applied aspects of sampling protocols and pollutant

Mallin, Michael

140

Three-dimensional shock-shock interactions on the scramjet inlet  

SciTech Connect (OSTI)

The effects of shock impingement on the inlet of a scramjet engine are investigated numerically. The impinging shock is caused by the vehicle forebody. The interaction of this forebody shock with the inlet leading edge shock results in a very complex fully three-dimensional flowfield containing local regions of high pressure and intense heating. In the present investigation, this complex flowfield is calculated by solving the thin-layer Navier-Stokes equations using a finite-volume flux splitting technique due to van Leer. For zero or small sweep angles a Type IV interaction occurs while for moderate sweep of about 25 deg, a Type V interaction occurs. Both Type IV and Type V interactions are investigated. 25 refs.

Singh, D.J.; Tiwari, S.N.; Kumar, A.

1990-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "inlet pilot tidal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Elimination of ``memory`` from sample handling and inlet system of a mass spectrometer  

DOE Patents [OSTI]

This paper describes a method for preparing the sample handling and inlet system of a mass spectrometer for analysis of a subsequent sample following analysis of a previous sample comprising the flushing of the system interior with supercritical CO{sub 2} and venting the interior. The method eliminates the effect of system ``memory`` on the subsequent analysis, especially following persistent samples such as xenon and krypton.

Chastgner, P.

1991-05-08T23:59:59.000Z

142

Modeling In-stream Tidal Energy Extraction and Its Potential Environmental Impacts  

SciTech Connect (OSTI)

In recent years, there has been growing interest in harnessing in-stream tidal energy in response to concerns of increasing energy demand and to mitigate climate change impacts. While many studies have been conducted to assess and map tidal energy resources, efforts for quantifying the associated potential environmental impacts have been limited. This paper presents the development of a tidal turbine module within a three-dimensional unstructured-grid coastal ocean model and its application for assessing the potential environmental impacts associated with tidal energy extraction. The model is used to investigate in-stream tidal energy extraction and associated impacts on estuarine hydrodynamic and biological processes in a tidally dominant estuary. A series of numerical experiments with varying numbers and configurations of turbines installed in an idealized estuary were carried out to assess the changes in the hydrodynamics and biological processes due to tidal energy extraction. Model results indicated that a large number of turbines are required to extract the maximum tidal energy and cause significant reduction of the volume flux. Preliminary model results also indicate that extraction of tidal energy increases vertical mixing and decreases flushing rate in a stratified estuary. The tidal turbine model was applied to simulate tidal energy extraction in Puget Sound, a large fjord-like estuary in the Pacific Northwest coast.

Yang, Zhaoqing; Wang, Taiping; Copping, Andrea; Geerlofs, Simon H.

2014-09-30T23:59:59.000Z

143

An Analysis of Microbial Pollution in the Sinclair-Dyes Inlet Watershed  

SciTech Connect (OSTI)

This assessment of fecal coliform sources and pathways in Sinclair and Dyes Inlets is part of the Project ENVironmental InVESTment (ENVVEST) being conducted by the Navy's Puget Sound Naval Shipyard and Intermediate Maintenance Facility in cooperation with the US Environmental Protection Agency, Washington State Department of Ecology, the Suquamish Tribe, Kitsap County, the City of Bremerton, the City of Port Orchard, and other local stakeholders. The goal of this study was to identify microbial pollution problems within the Sinclair-Dyes Inlet watershed and to provide a comprehensive assessment of fecal coliform (FC) contamination from all identifiable sources in the watershed. This study quantifies levels of contamination and estimated loadings from known sources within the watersheds and describes pollutant transport mechanisms found in the study area. In addition, the effectiveness of pollution prevention and mitigation measures currently in place within the Sinclair-Dyes Inlet watershed are discussed. This comprehensive study relies on historical data collected by several cooperating agencies, in addition to data collected during the study period from spring 2001 through summer 2005. This report is intended to provide the technical information needed to continue current water quality cleanup efforts and to help implement future efforts.

May, Christopher W.; Cullinan, Valerie I.

2005-09-21T23:59:59.000Z

144

GI Self-Supply Pilot Overview  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

BPA TRANSMISSION SERVICES Transmission Wind Integration Systems Team GENERATION IMBALANCE SELF SUPPLY PILOT PROJECT OVERVIEW VERSION: 0.1 UPDATED: 7292009 giself-supplypilotov...

145

Energy Economic Zone Pilot Program (Florida)  

Broader source: Energy.gov [DOE]

In the 2009 Legislative Session, the Florida Legislature established the Pilot Program to address economic development and the creation of energy efficient land use patterns. The Energy Economic...

146

Enterprise Assessments Review, Waste Isolation Pilot Plant -...  

Energy Savers [EERE]

December, 2014 Review of the Waste Isolation Pilot Plant Conduct of Maintenance Recovery Plan The Office of Nuclear Safety and Environmental Assessments, within the U.S. Department...

147

Enforcement Documents - Waste Isolation Pilot Plant | Department...  

Broader source: Energy.gov (indexed) [DOE]

related to Quality Assurance Deficiencies associated with the Super High-Efficiency Neutron Counter Non-Destructive Assay System Refurbishment at the Waste Isolation Pilot Plant...

148

Enterprise Assessments Review, Waste Isolation Pilot Plant -...  

Energy Savers [EERE]

December 2014 Review of the Waste Isolation Pilot Plant Recovery Plan for Operating Diesel Equipment with Available Underground Airflows. The Office of Nuclear Safety and...

149

Atmospheric heat redistribution and collapse on tidally locked rocky planets  

E-Print Network [OSTI]

Atmospheric collapse is likely to be of fundamental importance to tidally locked rocky exoplanets but remains understudied. Here, general results on the heat transport and stability of tidally locked terrestrial-type atmospheres are reported. First, the problem is modeled with an idealized 3D general circulation model (GCM) with gray gas radiative transfer. It is shown that over a wide range of parameters the atmospheric boundary layer, rather than the large-scale circulation, is the key to understanding the planetary energy balance. Through a scaling analysis of the interhemispheric energy transfer, theoretical expressions for the day-night temperature difference and surface wind speed are created that reproduce the GCM results without tuning. Next, the GCM is used with correlated-k radiative transfer to study heat transport for two real gases (CO2 and CO). For CO2, empirical formulae for the collapse pressure as a function of planetary mass and stellar flux are produced, and critical pressures for atmospher...

Wordsworth, Robin

2014-01-01T23:59:59.000Z

150

Spatial motion of the Magellanic Clouds. Tidal models ruled out?  

E-Print Network [OSTI]

Recently, Kallivayalil et al. derived new values of the proper motion for the Large and Small Magellanic Clouds (LMC and SMC, respectively). The spatial velocities of both Clouds are unexpectedly higher than their previous values resulting from agreement between the available theoretical models of the Magellanic System and the observations of neutral hydrogen (HI) associated with the LMC and the SMC. Such proper motion estimates are likely to be at odds with the scenarios for creation of the large-scale structures in the Magellanic System suggested so far. We investigated this hypothesis for the pure tidal models, as they were the first ones devised to explain the evolution of the Magellanic System, and the tidal stripping is intrinsically involved in every model assuming the gravitational interaction. The parameter space for the Milky Way (MW)-LMC-SMC interaction was analyzed by a robust search algorithm (genetic algorithm) combined with a fast restricted N-body model of the interaction. Our method extended ...

Ruzicka, Adam; Palous, Jan

2008-01-01T23:59:59.000Z

151

Investigation of tidal power, Cobscook Bay, Maine. Environmental Appendix  

SciTech Connect (OSTI)

This report presents information regarding existing terrestrial and marine resources and water quality conditions in the Cobscook Bay area. A preliminary assessment of impacts from a tidal power project is also presented and data gaps are identified. Reports contained in the appendix were prepared by the U.S. Fish and Wildlife Service, the National Marine Fisheries Service, the University of Maine at Orino, School of Forestry Resources and the U.S. Army Corps of Engineers.

Not Available

1980-08-01T23:59:59.000Z

152

Extremely Close-In Giant Planets from Tidal Capture  

E-Print Network [OSTI]

Planets that form around stars born in dense stellar environments are subject to dynamical perturbations from other stars in the system. These perturbations will strip outer planets, forming a population of free-floating planets, some of which will be tidally captured before they evaporate from the system. For systems with velocity dispersion of 1 km/s, Jupiter-mass planets can be captured into orbits with periods of 0.1-0.4 days, which are generally stable over a Gyr, assuming quadratic suppression of eddy viscosity in the convective zones of the host stars. Under this assumption, and that most stars form several massive planets at separations 5-50 AU, about 0.03% of stars in rich, mature open clusters should have extremely close-in tidally captured planets. Approximately 0.005% of field stars should also have such planets, which may be found in field searches for transiting planets. Detection of a population of tidally-captured planets would indicate that most stars formed in stellar clusters. In globular clusters, the fraction of stars with tidally-captured planets rises to 0.1% -- in conflict with the null result of the transit search in 47 Tuc. This implies that, if the quadratic prescription for viscosity suppression is correct, planetary formation was inhibited in 47 Tuc: less than one planet of Jupiter-mass or greater (bound or free-floating) formed per cluster star. Less than half of the stars formed solar-system analogs. Brown dwarfs can also be captured in tight orbits; the lack of such companions in 47 Tuc in turn implies an upper limit on the initial frequency of brown dwarfs in this cluster. However, this upper limit is extremely sensitive to the highly uncertain timescale for orbital decay, and thus it is difficult to draw robust conclusions about the low-mass end of the mass function in 47 Tuc.

B. Scott Gaudi

2003-07-15T23:59:59.000Z

153

Resonant oscillations and tidal heating in coalescing binary neutron stars  

E-Print Network [OSTI]

Tidal interaction in a coalescing neutron star binary can resonantly excite the g-mode oscillations of the neutron star when the frequency of the tidal driving force equals the intrinsic g-mode frequencies. We study the g-mode oscillations of cold neutron stars using recent microscopic nuclear equations of state, where we determine self-consistently the sound speed and Brunt-V\\"ais\\"al\\"a frequency in the nuclear liquid core. The properties of the g-modes associated with the stable stratification of the core depend sensitively on the pressure-density relation as well as the symmetry energy of the dense nuclear matter. The frequencies of the first ten g-modes lie approximately in the range of 10-100 Hz. Resonant excitations of these g-modes during the last few minutes of the binary coalescence result in energy transfer and angular momentum transfer from the binary orbit to the neutron star. The angular momentum transfer is possible because a dynamical tidal lag develops even in the absence of fluid viscosity. ...

Lai, D

1994-01-01T23:59:59.000Z

154

Tidal Capture of Stars by Intermediate-Mass Black Holes  

E-Print Network [OSTI]

Recent X-ray observations and theoretical modelling have made it plausible that some ultraluminous X-ray sources (ULX) are powered by intermediate-mass black holes (IMBHs). N-body simulations have also shown that runaway merging of stars in dense star clusters is a way to form IMBHs. In the present paper we have performed N-body simulations of young clusters such as MGG-11 of M82 in which IMBHs form through runaway merging. We took into account the effect of tidal heating of stars by the IMBH to study the tidal capture and disruption of stars by IMBHs. Our results show that the IMBHs have a high chance of capturing stars through tidal heating within a few core relaxation times and we find that 1/3 of all runs contain a ULX within the age limits of MGG-11, a result consistent with the fact that a ULX is found in this galaxy. Our results strengthen the case for some ULX being powered by intermediate-mass black holes.

H. Baumgardt; C. Hopman; S. Portegies Zwart; J. Makino

2005-11-27T23:59:59.000Z

155

Modeling Tidal Streams in evolving dark matter halos  

E-Print Network [OSTI]

We explore whether stellar tidal streams can provide information on the secular, cosmological evolution of the Milky Way's gravitational potential and on the presence of subhalos. We carry out long-term (~t_hubble) N-body simulations of disrupting satellite galaxies in a semi-analytic Galaxy potential where the dark matter halo and the subhalos evolve according to a LCDM cosmogony. All simulations are constrained to end up with the same position and velocity at present. Our simulations account for: (i) the secular evolution of the host halo's mass, size and shape, (ii) the presence of subhalos and (iii) dynamical friction. We find that tidal stream particles respond adiabatically to the Galaxy growth so that, at present, the energy and angular momentum distribution is exclusively determined by the present Galaxy potential. In other words, all present-day observables can only constrain the present mass distribution of the Galaxy independent of its past evolution. We also show that, if the full phase-space distribution of a tidal stream is available, we can accurately determine (i) the present Galaxy's shape and (ii) the amount of mass loss from the stream's progenitor, even if this evolution spanned a cosmologically significant epoch.

Jorge Penarrubia; Andrew J. Benson; David Martinez-Delgado; Hans-Walter Rix

2005-12-20T23:59:59.000Z

156

Results from Beyond Design Basis Event Pilots | Department of...  

Broader source: Energy.gov (indexed) [DOE]

Results from Beyond Design Basis Event Pilots Results from Beyond Design Basis Event Pilots September 19, 2012 Presenter: Mike Hillman, Program Manager, Office of Health, Safety...

157

Waste Isolation Pilot Plant, National Transuranic Program Have...  

Office of Environmental Management (EM)

Waste Isolation Pilot Plant, National Transuranic Program Have Banner Year in 2013 Waste Isolation Pilot Plant, National Transuranic Program Have Banner Year in 2013 December 24,...

158

Federal Technology Deployment Pilot: Exterior Solid State Lighting...  

Energy Savers [EERE]

Federal Technology Deployment Pilot: Exterior Solid State Lighting Federal Technology Deployment Pilot: Exterior Solid State Lighting Presentation-given at the Fall 2011 Federal...

159

Clean Energy Works Portland Pilot Process Evaluation | Department...  

Broader source: Energy.gov (indexed) [DOE]

Energy Works Portland Pilot Process Evaluation Clean Energy Works Portland Pilot Process Evaluation This is a document from Research Into Action Inc., posted to the website of the...

160

2014 call for NERSC's Data Intensive Computing Pilot Program...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

NERSC's Data Intensive Computing Pilot Program 2014 call for NERSC's Data Intensive Computing Pilot Program Due December 10 November 18, 2013 by Francesca Verdier (0 Comments)...

Note: This page contains sample records for the topic "inlet pilot tidal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Commercial Building Energy Asset Score: Pilot Findings and Program...  

Office of Environmental Management (EM)

Score: Pilot Findings and Program Update Commercial Building Energy Asset Score: Pilot Findings and Program Update The webinar was held on April 16, 2014, to share the findings...

162

Algenol Biofuels Inc., Integrated Pilot-Scale Biorefinery  

Broader source: Energy.gov (indexed) [DOE]

Integrated Pilot- Scale Biorefinery for Producing Ethanol from Hybrid Algae Algenol Biofuels Inc., together with its partners, will construct an integrated pilot-scale...

163

PEATGAS pilot plant operating results  

SciTech Connect (OSTI)

The Institute of Gas Technology has been developing the PEATGAS process for the conversion of peat to synthetic fuels. A program has recently been completed for the pilot-plant-scale testing of the process. In this scheme, peat is gasified in a two-stage reactor system, which operates at temperatures up to 1750/sup 0/F and pressures up to 500 psig. The process can be controlled to maximize the production of either substitute natural gas (SNG) or liquid hydrocarbons. The technical feasibility of the process was demonstrated in a series of five gasification tests. Highlights of this operating program are presented in this paper.

Biljetina, R.; Punwani, D.

1982-08-01T23:59:59.000Z

164

PEATGAS pilot plant operating results  

SciTech Connect (OSTI)

The Institute of Gas Technology has been developing the PEATGAS process for the conversion of peat to synthetic fuels. A program has recently been completed for the pilot-plant-scale testing of the process. In this scheme, peat is gasified in a two-stage reactor system, which operates at temperatures up to 1750/sup 0/F and pressures up to 500 psig. The process can be controlled to maximize the production of either substitute natural gas (SNG) or liquid hydrocarbons. The technical feasibility of the process was demonstrated in a series of five gasification tests. Highlights of this operating program are presented in this paper.

Biljetina, R.; Punwani, D.

1982-01-01T23:59:59.000Z

165

Pilot tests guide VOC control choice  

SciTech Connect (OSTI)

On-site pilot testing determines proper operating conditions for catalysts of pollution control equipment at optimum performance levels while demonstrating their ability to reduce emissions, odors and opacity from stack gases in manufacturing processes. Examples are provided ofr the catalytic control of emissions from coffee roasting, carbon fiber manufacturing, and can coating. Portable oxidizer units are employed in the pilot testing.

Van Benschoten, D.M. [Johnson Matthey Environmental Products, Wayne, PA (United States)

1993-10-01T23:59:59.000Z

166

Tidal Heating of Terrestrial Extra-Solar Planets and Implications for their Habitability  

E-Print Network [OSTI]

The tidal heating of hypothetical rocky (or terrestrial) extra-solar planets spans a wide range of values depending on stellar masses and initial orbits. Tidal heating may be sufficiently large (in many cases, in excess of radiogenic heating) and long-lived to drive plate tectonics, similar to the Earth's, which may enhance the planet's habitability. In other cases, excessive tidal heating may result in Io-like planets with violent volcanism, probably rendering them unsuitable for life. On water-rich planets, tidal heating may generate sub-surface oceans analogous to Europa's with similar prospects for habitability. Tidal heating may enhance the outgassing of volatiles, contributing to the formation and replenishment of a planet's atmosphere. To address these issues, we model the tidal heating and evolution of hypothetical extra-solar terrestrial planets. The results presented here constrain the orbital and physical properties required for planets to be habitable.

Brian Jackson; Rory Barnes; Richard Greenberg

2008-08-20T23:59:59.000Z

167

Effects of inlet geometries on flow recirculation in an axial-flow pump  

E-Print Network [OSTI]

and mixing occurred. The problem was remedied for good by mounting two single lip seals back to back. Because of its availability, an automotive air conditioning con- denser was used as the heat exchanger for the cooling/lubricating system. The pressure... APPARATUS. 3. 1 Introduction. . . . ~ 3 ' 2 Test Pump 3. 3 Power Supply. 3. 4 Hydraulic Loop 3. 5 Lubricating and Cooling System. 3. 6 Inlet Geometries. ~ ~ ~ ~ ~ ~ ~ 3. 7 Instrumentation 'I P 14 14 14 19 23 23 30 33 CHAPTER IV. EXPERIMENTAL...

Alpan, Kenan

1984-01-01T23:59:59.000Z

168

Assessment of Strike of Adult Killer Whales by an OpenHydro Tidal Turbine Blade  

SciTech Connect (OSTI)

Report to DOE on an analysis to determine the effects of a potential impact to an endangered whale from tidal turbines proposed for deployment in Puget Sound.

Carlson, Thomas J.; Elster, Jennifer L.; Jones, Mark E.; Watson, Bruce E.; Copping, Andrea E.; Watkins, Michael L.; Jepsen, Richard A.; Metzinger, Kurt

2012-02-01T23:59:59.000Z

169

Modeling the Effects of Tidal Energy Extraction on Estuarine Hydrodynamics in a Stratified Estuary  

SciTech Connect (OSTI)

A three-dimensional coastal ocean model with a tidal turbine module was used in this paper to study the effects of tidal energy extraction on temperature and salinity stratification and density driven two-layer estuarine circulation. Numerical experiments with various turbine array configurations were carried out to investigate the changes in tidally mean temperature, salinity and velocity profiles in an idealized stratified estuary that connects to coastal water through a narrow tidal channel. The model was driven by tides, river inflow and sea surface heat flux. To represent the realistic size of commercial tidal farms, model simulations were conducted based on a small percentage of the total number of turbines that would generate the maximum extractable energy in the system. Model results indicated that extraction of tidal energy will increase the vertical mixing and decrease the stratification in the estuary. Extraction of tidal energy has stronger impact on the tidally-averaged salinity, temperature and velocity in the surface layer than the bottom. Energy extraction also weakens the two-layer estuarine circulation, especially during neap tides when tidal mixing the weakest and energy extraction is the smallest. Model results also show that energy generation can be much more efficient with higher hub height with relatively small changes in stratification and two-layer estuarine circulation.

Yang, Zhaoqing; Wang, Taiping

2013-08-15T23:59:59.000Z

170

Multiple pollutant removal using the condensing heat exchanger. Task 2, Pilot scale IFGT testing  

SciTech Connect (OSTI)

The purpose of Task 2 (IFGT Pilot-Scale Tests at the B&W Alliance Research Center) is to evaluate the emission reduction performance of the Integrated flue Gas Treatment (IFGT) process for coal-fired applications. The IFGT system is a two-stage condensing heat exchanger that captures multiple pollutants - while recovering waste heat. The IFGT technology offers the potential of a addressing the emission of SO{sub 2} and particulate from electric utilities currently regulated under the Phase I and Phase II requirements defined in Title IV, and many of the air pollutants that will soon be regulated under Title III of the Clean Air Act. The performance data will be obtained at pilot-scale conditions similar to full-scale operating systems. The task 2 IFGT tests have been designed to investigate several aspects of IFGT process conditions at a broader range of variable than would be feasible at a larger scale facility. The performance parameters that will be investigated are as follows: SO{sub 2} removal; particulate removal; removal of mercury and other heavy metals; NO{sub x} removal; HF and HCl removal; NH{sub 3} removal; ammonia-sulfur compounds generation; and steam injection for particle removal. For all of the pollutant removal tests, removal efficiency will be based on measurements at the inlet and outlet of the IFGT facility. Heat recovery measurements will also be made during these tests to demonstrate the heat recovery provided by the IFGT technology. This report provides the Final Test Plan for the first coal tested in the Task 2 pilot-scale IFGT tests.

Jankura, B.J.

1996-01-01T23:59:59.000Z

171

GENETIC ALGORITHMS FOR A SINGLE-TRACK VEHICLE AUTONOMOUS PILOT  

E-Print Network [OSTI]

GENETIC ALGORITHMS FOR A SINGLE-TRACK VEHICLE AUTONOMOUS PILOT Dana Vrajitoru Intelligent Systems algorithms to an autonomous pilot designed for motorized single-track vehicles (motorcycles). The pilot contribute efficiently to configuring the autonomous pilot. Key Words Genetic algorithms, multi

Vrajitoru, Dana

172

MHK Projects/BW2 Tidal | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpIncMAK Technologies Jump to:BW2 Tidal < MHK Projects Jump to:

173

MHK Projects/Cape May Tidal Energy | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpIncMAK Technologies Jump to:BW2 Tidal <CETO La ReunionCape

174

MHK Projects/Cuttyhunk Tidal Energy Plant | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpIncMAK Technologies Jump to:BW2 Tidal <CETOCohanseyHub <

175

MHK Projects/Deception Pass Tidal Energy Hydroelectric Project | Open  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpIncMAK Technologies Jump to:BW2 Tidal

176

MHK Projects/Dorchester Maurice Tidal | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpIncMAK Technologies Jump to:BW2 TidalMar Landing <

177

MHK Projects/East Foreland Tidal Energy | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpIncMAK Technologies Jump to:BW2 TidalMar Landing <DouglasForeland

178

MHK Projects/Gastineau Channel Tidal | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpIncMAK Technologies Jump to:BW2 TidalMarFalmouthVinalhaven ME

179

MHK Projects/Wiscasset Tidal Energy Plant | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpIncMAKGalway Bay IE < MHKInformation BretonMOWiscasset Tidal

180

MHK Technologies/Deep Gen Tidal Turbines | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpIncMAKGalway Bay IE <AirWEC < MHK<Tidal Turbines < MHK

Note: This page contains sample records for the topic "inlet pilot tidal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

MHK Technologies/KESC Tidal Generator | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpIncMAKGalway Bay IE <AirWECHelix <IWAVE < MHKKESC Tidal

182

MHK Technologies/Rotech Tidal Turbine RTT | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpIncMAKGalway Bay IEOWC < MHKPulse-Stream 120 < MHKRotech Tidal

183

MHK Technologies/Tidal Barrage | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpIncMAKGalway Bay IEOWC <SurgeWEC <Generator.jpgTheTidal

184

MHK Technologies/Tidal Delay | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpIncMAKGalway Bay IEOWC <SurgeWEC <Generator.jpgTheTidalDelay

185

MHK Technologies/Tidal Hydraulic Generators THG | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpIncMAKGalway Bay IEOWC <SurgeWEC <Generator.jpgTheTidalDelayTHG

186

Hydra Tidal Energy Technology AS | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy Resources Jump to: navigation,Ohio:GreerHiCalifornia: Energy ResourcesPark,is aHy9Hydesville,Hydra Tidal

187

Costilla County Biodiesel Pilot Project  

SciTech Connect (OSTI)

The Costilla County Biodiesel Pilot Project has demonstrated the compatibility of biodiesel technology and economics on a local scale. The project has been committed to making homegrown biodiesel a viable form of community economic development. The project has benefited by reducing risks by building the facility gradually and avoiding large initial outlays of money for facilities and technologies. A primary advantage of this type of community-scale biodiesel production is that it allows for a relatively independent, local solution to fuel production. Successfully using locally sourced feedstocks and putting the fuel into local use emphasizes the feasibility of different business models under the biodiesel tent and that there is more than just a one size fits all template for successful biodiesel production.

Doon, Ben; Quintana, Dan

2011-08-25T23:59:59.000Z

188

Better Plants Water Pilot- Overview  

Broader source: Energy.gov [DOE]

The Department of Energy (DOE) is expanding the Better Buildings Challenge to help partners demonstrate successful approaches to saving water and decrease their utility bills. The commercial and industrial sectors account for more than 25 percent of the withdrawals from public water supplies and many organizations in these sectors may have savings opportunities of 20 to 40%. The efficient use of water resources results in lower operating costs, a more reliable water supply, and improved water quality. Additionally, because energy is required to transport and treat water, saving water also saves energy. Through this pilot, DOE will work with a small, diverse group of Better Buildings Challenge Partners to expand their resource management strategies to include water in addition to energy, set water savings goals, track progress and showcase solutions.

189

Cleveland EnergySaver Pilot Program (From Pilot to Permanent Program)  

Broader source: Energy.gov [DOE]

Provides an overview of the Cleveland EnergySaver Pilot Program aimed at reducing barriers to widespread adoption of residential energy efficient retrofits.

190

A Tidal Hydrology Assessment for Reconnecting Spring Branch Creek to Suisun Marsh, Solano County CA: Predicting the Impact to the Federally Listed Plant Soft Bird's Beak  

E-Print Network [OSTI]

this study. Changes in hydrology are not the only potentialA Tidal Hydrology Assessment for Reconnecting Spring Branchmay change the tidal hydrology and impact the area occupied

Olson, Jessica J.

2011-01-01T23:59:59.000Z

191

Integration of Wave and Tidal Power into the Haida Gwaii Electrical Grid  

E-Print Network [OSTI]

Integration of Wave and Tidal Power into the Haida Gwaii Electrical Grid by Susan Margot Boronowski Committee Integration of Wave and Tidal Power into the Haida Gwaii Electrical Grid by Susan Margot, Canada that relies heavily on diesel fuel for energy generation. An investigation is done

Victoria, University of

192

Cross-shore sediment transport and the equilibrium morphology of mudflats under tidal currents  

E-Print Network [OSTI]

Cross-shore sediment transport and the equilibrium morphology of mudflats under tidal currents D of suspended sediment transport under cross-shore tidal currents on an intertidal mudflat. We employ a Lagrangian formulation to obtain periodic solutions for the sediment transport over idealized bathymetries

Hogg, Andrew

193

Intracranial Pressure Variation Associated with Changes in End-Tidal CO2  

E-Print Network [OSTI]

Intracranial Pressure Variation Associated with Changes in End-Tidal CO2 Sunghan Kim, James Mc that the partial pressure of arterial CO2 (PaCO2) can affect cerebral blood flow, cerebral blood volume, and therefore ICP. The end-tidal CO2 (ETCO2) is usually monitored by clinicians as a proxy for PaCO2. We show

194

Mercury Dynamics in a San Francisco Estuary Tidal Wetland: Assessing Dynamics Using In Situ Measurements  

E-Print Network [OSTI]

Mercury Dynamics in a San Francisco Estuary Tidal Wetland: Assessing Dynamics Using In Situ the tidally driven exchange of mercury (Hg) between the waters of the San Francisco estuary and Browns Island, respectively--together predicted 94 % of the observed variability in measured total mercury concentra- tion

Boss, Emmanuel S.

195

The Magellanic Bridge: The Nearest Purely Tidal Stellar Population  

E-Print Network [OSTI]

We report on observations of the stellar populations in twelve fields spanning the region between the Magellanic Clouds, made with the Mosaic-II camera on the 4-meter telescope at the Cerro-Tololo Inter-American Observatory. The two main goals of the observations are to characterize the young stellar population (which presumably formed in situ in the Bridge and therefore represents the nearest stellar population formed from tidal debris), and to search for an older stellar component (which would have been stripped from either Cloud as stars, by the same tidal forces which formed the gaseous Bridge). We determine the star-formation history of the young inter-Cloud population, which provides a constraint on the timing of the gravitational interaction which formed the Bridge. We do not detect an older stellar population belonging to the Bridge in any of our fields, implying that the material that was stripped from the Clouds to form the Magellanic Bridge was very nearly a pure gas.

Jason Harris

2006-12-04T23:59:59.000Z

196

Dynamical resonance locking in tidally interacting binary systems  

E-Print Network [OSTI]

We examine the dynamics of resonance locking in detached, tidally interacting binary systems. In a resonance lock, a given stellar or planetary mode is trapped in a highly resonant state for an extended period of time, during which the spin and orbital frequencies vary in concert to maintain the resonance. This phenomenon is qualitatively similar to resonance capture in planetary dynamics. We show that resonance locks can accelerate the course of tidal evolution in eccentric systems and also efficiently couple spin and orbital evolution in circular binaries. Previous analyses of resonance locking have not treated the mode amplitude as a fully dynamical variable, but rather assumed the adiabatic (i.e. Lorentzian) approximation valid only in the limit of relatively strong mode damping. We relax this approximation, analytically derive conditions under which the fixed point associated with resonance locking is stable, and further check these analytic results using numerical integrations of the coupled mode, spin, and orbital evolution equations. These show that resonance locking can sometimes take the form of complex limit cycles or even chaotic trajectories. We provide simple analytic formulae that define the binary and mode parameter regimes in which resonance locks of some kind occur (stable, limit cycle, or chaotic). We briefly discuss the astrophysical implications of our results for white dwarf and neutron star binaries as well as eccentric stellar binaries.

Joshua Burkart; Eliot Quataert; Phil Arras

2014-10-25T23:59:59.000Z

197

PRELIMINARY EVALUATION OF PILOT PERFORMANCE-BASED  

E-Print Network [OSTI]

...................................................................................................................................5 History of the Energy Commission's PBI Program and Its DevelopmentCALIFORNIA ENERGY COMMISSION PRELIMINARY EVALUATION OF PILOT PERFORMANCE-BASED INCENTIVE PROGRAM STAFFREPORT SEPTEMBER 2007 CEC-300-2007-011 Arnold Schwarzenegger, Governor #12;CALIFORNIA ENERGY COMMISSION

198

Journey to Leadership Certificate Program (Pilot)  

Broader source: Energy.gov [DOE]

The Office of Learning and Workforce Development is pleased to announce a pilot training program for DOE entry-level professionals.  The program orientation is scheduled for June 4, 2014.For Entry...

199

Murray City Power- Net Metering Pilot Program  

Broader source: Energy.gov [DOE]

Under a pilot program, Murray City Power offers net metering to customers that generate electricity using photovoltaic (PV), wind-electric or hydroelectric systems with a maximum capacity of 10...

200

Tidal deformation of a slowly rotating material body. I. External metric  

E-Print Network [OSTI]

We construct the external metric of a slowly rotating, tidally deformed material body in general relativity. The tidal forces acting on the body are assumed to be weak and to vary slowly with time, and the metric is obtained as a perturbation of a background metric that describes the external geometry of an isolated, slowly rotating body. The tidal environment is generic and characterized by two symmetric-tracefree tidal moments E_{ab} and B_{ab}, and the body is characterized by its mass M, its radius R, and a dimensionless angular-momentum vector \\chi^a environment requires the introduction of four new quantities, which we designate as rotational-tidal Love numbers. All these Love numbers are gauge ...

Landry, Philippe

2015-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "inlet pilot tidal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Modeling Tidal Stream Energy Extraction and its Effects on Transport Processes in a Tidal Channel and Bay System Using a Three-dimensional Coastal Ocean Model  

SciTech Connect (OSTI)

This paper presents a numerical modeling study for simulating in-stream tidal energy extraction and assessing its effects on the hydrodynamics and transport processes in a tidal channel and bay system connecting to coastal ocean. A marine and hydrokinetic (MHK) module was implemented in a three-dimensional (3-D) coastal ocean model using the momentum sink approach. The MHK model was validated with the analytical solutions for tidal channels under one-dimensional (1-D) conditions. Model simulations were further carried out to compare the momentum sink approach with the quadratic bottom friction approach. The effects of 3-D simulations on the vertical velocity profile, maximum extractable energy, and volume flux reduction across the channel were investigated through a series of numerical experiments. 3-D model results indicate that the volume flux reduction at the maximum extractable power predicted by the 1-D analytical model or two-dimensional (2-D) depth-averaged numerical model may be overestimated. Maximum extractable energy strongly depends on the turbine hub height in the water column, and which reaches a maximum when turbine hub height is located at mid-water depth. Far-field effects of tidal turbines on the flushing time of the tidal bay were also investigated. Model results demonstrate that tidal energy extraction has a greater effect on the flushing time than volume flux reduction, which could negatively affect the biogeochemical processes in estuarine and coastal waters that support primary productivity and higher forms of marine life.

Yang, Zhaoqing; Wang, Taiping; Copping, Andrea E.

2013-02-28T23:59:59.000Z

202

Surface cooling of scramjet engine inlets using heat pipe, transpiration, and film cooling  

SciTech Connect (OSTI)

This article reports the results of applying a finite-difference-based computational technique to the problem of predicting the transient thermal behavior of a scramjet engine inlet exposed to a typical hypersonic flight aerodynamic surface heating environment, including type IV shock interference heating. The leading-edge cooling model utilized incorporates liquid metal heat pipe cooling with surface transpiration and film cooling. Results include transient structural temperature distributions, aerodynamic heat inputs, and surface coolant distributions. It seems that these cooling techniques may be used to hold maximum skin temperatures to near acceptable values during the severe aerodynamic and type IV shock interference heating effects expected on the leading edge of a hypersonic aerospace vehicle scramjet engine. 15 refs.

Modlin, J.M.; Colwell, G.T. (U.S. Army, Strategic Defense Command, Huntsville, AL (United States) Georgia Institute of Technology, Atlanta (United States))

1992-09-01T23:59:59.000Z

203

Active Flow Control on Bidirectional Rotors for Tidal MHK Applications  

SciTech Connect (OSTI)

A marine and hydrokinetic (MHK) tidal turbine extracts energy from tidal currents, providing clean, sustainable electricity generation. In general, all MHK conversion technologies are confronted with significant operational hurdles, resulting in both increased capital and operations and maintenance (O&M) costs. To counter these high costs while maintaining reliability, MHK turbine designs can be simplified. Prior study found that a tidal turbine could be cost-effectively simplified by removing blade pitch and rotor/nacelle yaw. Its rotor would run in one direction during ebb and then reverse direction when the current switched to flood. We dubbed such a turbine a bidirectional rotor tidal turbine (BRTT). The bidirectional hydrofoils of a BRTT are less efficient than conventional hydrofoils and capture less energy, but the elimination of the pitch and yaw systems were estimated to reduce levelized cost of energy by 7.8%-9.6%. In this study, we investigated two mechanisms for recapturing some of the performance shortfall of the BRTT. First, we developed a novel set of hydrofoils, designated the yy series, for BRTT application. Second, we investigated the use of active flow control via microtabs. Microtabs are small deployable/retractable tabs, typically located near the leading or trailing edge of an air/hydrofoil with height on the order of the boundary layer thickness (1% - 2% of chord). They deploy approximately perpendicularly to the foil surface and, like gurney flaps and plain flaps, globally affect the aerodynamics of the airfoil. By strategically placing microtabs and selectively deploying them based on the direction of the inflow, performance of a BRTT rotor can be improved while retaining bidirectional operation. The yy foils were computationally designed and analyzed. They exhibited better performance than the baseline bidirectional foil, the ellipse. For example, the yyb07cn-180 had 14.7% higher (l/d)max than an ellipse of equal thickness. The yyb07cn family also had higher c{sub p,min} than equivalently thick ellipses, indicating less susceptibility to cavitation. Microtabs applied on yy foils demonstrated improved energy capture. A series of variable speed and constant speed rotors were developed with the yyb07cn family of hydrofoils. The constant speed yyb07cn rotor (yy-B02-Rcs,opt) captured 0.45% more energy than the equivalent rotor with ellipses (e-B02-Rcs,opt). With microtabs deployed (yy?t-B02-Rcs,opt), the energy capture increase over the rotor with ellipses was 1.05%. Note, however, that microtabs must be applied judiciously to bidirectional foils. On the 18% thick ellipse, performance decreased with the addition of microtabs. Details of hydrofoil performance, microtab sizing and positioning, rotor configurations, and revenue impacts are presented herein.

Shiu, Henry [Research Engineer; van Dam, Cornelis P. [Professor

2013-08-22T23:59:59.000Z

204

Tidal Downsizing model. II. Planet-metallicity correlations  

E-Print Network [OSTI]

Core Accretion (CA), the de-facto accepted theory of planet formation, requires formation of massive solid cores as a prerequisite for assembly of gas giant planets. The observed metallicity correlations of exoplanets are puzzling in the context of CA. While gas giant planets are found preferentially around metal-rich host stars, planets smaller than Neptune orbit hosts with a wide range of metallicities. We propose an alternative interpretation of these observations in the framework of a recently developed planet formation hypothesis called Tidal Downsizing (TD). We perform population synthesis calculations based on TD, and find that the connection between the populations of the gas giant and the smaller solid-core dominated planets is non linear and not even monotonic. While gas giant planets formed in the simulations in the inner few AU region follow a strong positive correlation with the host star metallicity, the smaller planets do not. The simulated population of these smaller planets shows a shallow pe...

Nayakshin, Sergei

2015-01-01T23:59:59.000Z

205

Circularization of Tidally Disrupted Stars around Spinning Supermassive Black Holes  

E-Print Network [OSTI]

We study the circularization of tidally disrupted stars on bound orbits around spinning supermassive black holes by performing three-dimensional smoothed particle hydrodynamic simulations with Post-Newtonian corrections. Our simulations reveal that debris circularization depends sensitively on the efficiency of radiative cooling. There are two stages in debris circularization if radiative cooling is inefficient: first, the stellar debris streams self-intersect due to relativistic apsidal precession; shocks at the intersection points thermalize orbital energy and the debris forms a geometrically thick, ring-like structure around the black hole. The ring rapidly spreads via viscous diffusion, leading to the formation of a geometrically thick accretion disk. In contrast, if radiative cooling is efficient, the stellar debris circularizes due to self-intersection shocks and forms a geometrically thin ring-like structure. In this case, the dissipated energy can be emitted during debris circularization as a precurso...

Hayasaki, Kimitake; Loeb, Abraham

2015-01-01T23:59:59.000Z

206

SPH simulations of tidally unstable accretion disks in cataclysmic variables  

E-Print Network [OSTI]

We numerically study the precessing disk model for superhump in the SU~UMa subclass of cataclysmic variables, using a two dimensional SPH code specifically designed for thin disk problems. Two disk simulations for a binary with mass ratio $q=\\frac{3}{17}$ (similar to OY~Car) are performed, in order to investigate the Lubow (1991 a,b) tidal resonance instability mechanism. In the first calculation, a disk evolves under steady mass transfer from $L_1$. In the second simulation, mass is added in Keplerian orbit to the inner disk. The two disks follow similar evolutionary paths. However the $L_1$ stream-disk interaction is found to slow the disk's radial expansion and to circularise gas orbits. The initial eccentricity growth in our simulations is exponential at a rate slightly less than predicted by Lubow (1991a). We do not observe a clearing of material from the resonance region via the disk's tidal response to the $m=2$ component of the binary potential as was described in Lubow (1992). Instead the $m=2$ response weakens as the disk eccentricty increases. Both disks reach an eccentric equilibrium state, in which they undergo prograde precession. The rate of viscous energy dissipation in the disks has a periodic excess with a period matching the disk's rotation. The source is identified as a large region in the outer disk, and the mechanism by which it is produced is identified. The time taken for the periodic excess to develop is consistent with the first appearance of superhumps in a superoutburst.

James R. Murray

1995-11-08T23:59:59.000Z

207

Tidal Energy System for On-Shore Power Generation  

SciTech Connect (OSTI)

Addressing the urgent need to develop LCOE competitive renewable energy solutions for US energy security and to replace fossil-fuel generation with the associated benefits to environment impacts including a reduction in CO2 emissions, this Project focused on the advantages of using hydraulic energy transfer (HET) in large-scale Marine Hydrokinetic (MHK) systems for harvesting off-shore tidal energy in US waters. A recent DOE resource assessment, identifies water power resources have a potential to meet 15% of the US electric supply by 2030, with MHK technologies being a major component. The work covered a TRL-4 laboratory proof-in-concept demonstration plus modeling of a 15MW full scale system based on an approach patented by NASA-JPL, in which submerged high-ratio gearboxes and electrical generators in conventional MHK turbine systems are replaced by a submerged hydraulic radial pump coupled to on-shore hydraulic motors driving a generator. The advantages are; first, the mean-time-between-failure (MTBF), or maintenance, can be extended from approximately 1 to 5 years and second, the range of tidal flow speeds which can be efficiently harvested can be extended beyond that of a conventional submerged generator. The approach uses scalable, commercial-off-the-shelf (COTS) components, facilitating scale-up and commercialization. All the objectives of the Project have been successfully met (1) A TRL4 system was designed, constructed and tested. It simulates a tidal energy turbine, with a 2-m diameter blade in up to a 2.9 m/sec flow. The system consists of a drive motor assembly providing appropriate torque and RPM, attached to a radial piston pump. The pump circulates pressurized, environmentally-friendly, HEES hydraulic fluid in a closed loop to an axial piston motor which drives an electrical generator, with a resistive load. The performance of the components, subsystems and system were evaluated during simulated tidal cycles. The pump is contained in a tank for immersion testing. The COTS pump and motor were selected to scale to MW size and were oversized for the TRL-4 demonstration, operating at only 1-6% of rated values. Nevertheless, in for 2-18 kW drive power, in agreement with manufacturer performance data, we measured efficiencies of 85-90% and 75-80% for the pump and motor, respectively. These efficiencies being 95-96% at higher operating powers. (2) Two follow-on paths were identified. In both cases conventional turbine systems can be modified, replacing existing gear box and generator with a hydraulic pump and on-shore components. On a conventional path, a TRL5/6 15kW turbine system can be engineered and tested on a barge at an existing site in Maine. Alternatively, on an accelerated path, a TRL-8 100kW system can be engineered and tested by modifying a team member's existing MHK turbines, with barge and grid-connected test sites in-place. On both paths the work can be expedited and cost effective by reusing TRL-4 components, modifying existing turbines and using established test sites. (3) Sizing, performance modeling and costing of a scaled 15MW system, suitable for operation in Maine's Western Passage, was performed. COTS components are identified and the performance projections are favorable. The estimated LCOE is comparable to wind generation with peak production at high demand times. (4) We determined that a similar HET approach can be extended to on-shore and off-shore wind turbine systems. These are very large energy resources which can be addressed in parallel for even great National benefit. (5) Preliminary results on this project were presented at two International Conferences on renewable energy in 2012, providing a timely dissemination of information. We have thus demonstrated a proof-in-concept of a novel, tidal HET system that eliminates all submerged gears and electronics to improve reliability. Hydraulic pump efficiencies of 90% have been confirmed in simulated tidal flows between 1 and 3 m/s, and at only 1-6% of rated power. Total system efficiencies have also been modeled, up to MW-scale, for ti

Bruce, Allan J

2012-06-26T23:59:59.000Z

208

Modeling the Energy Output from an In-Stream Tidal Turbine Farm  

E-Print Network [OSTI]

Abstract—This paper is based on a recent paper presented in the 2007 IEEE SMC conference by the same authors [1], discussing an approach to predicting energy output from an instream tidal turbine farm. An in-stream tidal turbine is a device for harnessing energy from tidal currents in channels, and functions in a manner similar to a wind turbine. A group of such turbines distributed in a site is called an in-stream tidal turbine farm which is similar to a wind farm. Approaches to estimating energy output from wind farms cannot be fully transferred to study tidal farms, however, because of the complexities involved in modeling turbines underwater. In this paper, we intend to develop an approach for predicting energy output of an in-stream tidal turbine farm. The mathematical formulation and basic procedure for predicting power output of a stand-alone turbine 1 is presented, which includes several highly nonlinear terms. In order to facilitate the computation and utilize the formulation for predicting power output from a turbine farm, a simplified relationship between turbine distribution and turbine farm energy output is derived. A case study is then conducted by applying the numerical procedure to predict the energy output of the farms. Various scenarios are implemented according to the environmental conditions in Seymour Narrows, British Columbia, Canada. Additionally, energy cost results are presented as an extension. Index Terms—renewable energy, in-stream turbine, tidal current, tidal power, vertical axis turbine, farm system modeling, in-stream tidal turbine farm 1 A stand-alone turbine refers to a turbine around which there is no other turbine that might potentially affect the performance of this turbine.

Ye Li; Barbara J. Lence; Sander M. Calisal

209

TIDAL DISSIPATION COMPARED TO SEISMIC DISSIPATION: IN SMALL BODIES, EARTHS, AND SUPER-EARTHS  

SciTech Connect (OSTI)

While the seismic quality factor and phase lag are defined solely by the bulk properties of the mantle, their tidal counterparts are determined by both the bulk properties and the size effect (self-gravitation of a body as a whole). For a qualitative estimate, we model the body with a homogeneous sphere, and express the tidal phase lag through the lag in a sample of material. Although simplistic, our model is sufficient to understand that the lags are not identical. The difference emerges because self-gravitation pulls the tidal bulge down. At low frequencies, this reduces strain and the damping rate, making tidal damping less efficient in larger objects. At higher frequencies, competition between self-gravitation and rheology becomes more complex, though for sufficiently large super-Earths the same rule applies: the larger the planet, the weaker the tidal dissipation in it. Being negligible for small terrestrial planets and moons, the difference between the seismic and tidal lagging (and likewise between the seismic and tidal damping) becomes very considerable for large exoplanets (super-Earths). In those, it is much lower than what one might expect from using a seismic quality factor. The tidal damping rate deviates from the seismic damping rate, especially in the zero-frequency limit, and this difference takes place for bodies of any size. So the equal in magnitude but opposite in sign tidal torques, exerted on one another by the primary and the secondary, have their orbital averages going smoothly through zero as the secondary crosses the synchronous orbit. We describe the mantle rheology with the Andrade model, allowing it to lean toward the Maxwell model at the lowest frequencies. To implement this additional flexibility, we reformulate the Andrade model by endowing it with a free parameter {zeta} which is the ratio of the anelastic timescale to the viscoelastic Maxwell time of the mantle. Some uncertainty in this parameter's frequency dependence does not influence our principal conclusions.

Efroimsky, Michael, E-mail: michael.efroimsky@usno.navy.mil [U.S. Naval Observatory, Washington, DC 20392 (United States)

2012-02-20T23:59:59.000Z

210

Multiscale heterogeneity characterization of tidal channel, tidal delta and foreshore facies, Almond Formation outcrops, Rock Springs uplift, Wyoming  

SciTech Connect (OSTI)

In order to accurately predict fluid flow within a reservoir, variability in the rock properties at all scales relevant to the specific depositional environment needs to be taken into account. The present work describes rock variability at scales from hundreds of meters (facies level) to millimeters (laminae) based on outcrop studies of the Almond Formation. Tidal channel, tidal delta and foreshore facies were sampled on the eastern flank of the Rock Springs uplift, southeast of Rock Springs, Wyoming. The Almond Fm. was deposited as part of a mesotidal Upper Cretaceous transgressive systems tract within the greater Green River Basin. Bedding style, lithology, lateral extent of beds of bedsets, bed thickness, amount and distribution of depositional clay matrix, bioturbation and grain sorting provide controls on sandstone properties that may vary more than an order of magnitude within and between depositional facies in outcrops of the Almond Formation. These features can be mapped on the scale of an outcrop. The products of diagenesis such as the relative timing of carbonate cement, scale of cemented zones, continuity of cemented zones, selectively leached framework grains, lateral variability of compaction of sedimentary rock fragments, and the resultant pore structure play an equally important, although less predictable role in determining rock property heterogeneity. A knowledge of the spatial distribution of the products of diagenesis such as calcite cement or compaction is critical to modeling variation even within a single facies in the Almond Fin. because diagenesis can enhance or reduce primary (depositional) rock property heterogeneity. Application of outcrop heterogeneity models to the subsurface is greatly hindered by differences in diagenesis between the two settings. The measurements upon which this study is based were performed both on drilled outcrop plugs and on blocks.

Schatzinger, R.A.; Tomutsa, L. [BDM Petroleum Technologies, Bartlesville, OK (United States)

1997-08-01T23:59:59.000Z

211

DOE/WIPP-12-3487 Waste Isolation Pilot Plant  

E-Print Network [OSTI]

AND RECOVERY ACT AND SOLID WASTE DISPOSAL ACTDraft DOE/WIPP-12-3487 Waste Isolation Pilot Plant Biennial Environmental Compliance Report United States Department of Energy Waste Isolation Pilot Plant Carlsbad Field Office Carlsbad, New Mexico

212

EECBG Success Story: Solar LED Light Pilot Project Illuminates...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Solar LED Light Pilot Project Illuminates the Way in Alabama EECBG Success Story: Solar LED Light Pilot Project Illuminates the Way in Alabama September 12, 2012 - 2:15pm Addthis...

213

HUD PowerSaver Pilot Loan Program  

SciTech Connect (OSTI)

The U.S. Department of Housing and Urban Development (HUD) recently announced the creation of a pilot loan program for home energy improvements. The PowerSaver loan program is a new, energy-focused variant of the Title I Property Improvement Loan Insurance Program (Title I Program) and is planned for introduction in early 2011. The PowerSaver pilot will provide lender insurance for secured and unsecured loans up to $25,000 to single family homeowners. These loans will specifically target residential energy efficiency and renewable energy improvements. HUD estimates the two-year pilot will fund approximately 24,000 loans worth up to $300 million; the program is not capped. The Federal Housing Administration (FHA), HUD's mortgage insurance unit, will provide up to $25 million in grants as incentives to participating lenders. FHA is seeking lenders in communities with existing programs for promoting residential energy upgrades.

Zimring, Mark; Hoffman, Ian

2010-12-10T23:59:59.000Z

214

The ALFALFA "Almost Darks" Campaign: Pilot VLA HI Observations of Five High Mass-to-Light Ratio Systems  

E-Print Network [OSTI]

We present VLA HI spectral line imaging of 5 sources discovered by ALFALFA. These targets are drawn from a larger sample of systems that were not uniquely identified with optical counterparts during ALFALFA processing, and as such have unusually high HI mass to light ratios. These candidate "Almost Dark" objects fall into 4 categories: 1) objects with nearby HI neighbors that are likely of tidal origin; 2) objects that appear to be part of a system of multiple HI sources, but which may not be tidal in origin; 3) objects isolated from nearby ALFALFA HI detections, but located near a gas-poor early-type galaxy; 4) apparently isolated sources, with no object of coincident redshift within ~400 kpc. Roughly 75% of the 200 objects without identified counterparts in the $\\alpha$.40 database (Haynes et al. 2011) fall into category 1. This pilot sample contains the first five sources observed as part of a larger effort to characterize HI sources with no readily identifiable optical counterpart at single dish resolutio...

Cannon, John M; Leisman, Lukas; Haynes, Martha P; Adams, Elizabeth A K; Giovanelli, Riccardo; Hallenbeck, Gregory; Janowiecki, Steven; Jones, Michael; Józsa, Gyula I G; Koopmann, Rebecca A; Nichols, Nathan; Papastergis, Emmanouil; Rhode, Katherine L; Salzer, John J; Troischt, Parker

2014-01-01T23:59:59.000Z

215

Microbial field pilot study. Final report  

SciTech Connect (OSTI)

A multi-well microbially enhanced oil recovery field pilot has been performed in the Southeast Vassar Vertz Sand Unit in Payne County, Oklahoma. The primary emphasis of the experiment was preferential plugging of high permeability zones for the purpose of improving waterflood sweep efficiency. Studies were performed to determine reservoir chemistry, ecology, and indigenous bacteria populations. Growth experiments were used to select a nutrient system compatible with the reservoir that encouraged growth of a group of indigenous nitrate-using bacteria and inhibit growth of sulfate-reducing bacteria. A specific field pilot area behind an active line drive waterflood was selected. Surface facilities were designed and installed. Injection protocols of bulk nutrient materials were prepared to facilitate uniform distribution of nutrients within the pilot area. By the end of December, 1991, 82.5 tons (75.0 tonnes) of nutrients had been injected in the field. A tracer test identified significant heterogeneity in the SEVVSU and made it necessary to monitor additional production wells in the field. The tracer tests and changes in production behavior indicate the additional production wells monitored during the field trial were also affected. Eighty two and one half barrels (13.1 m{sup 3}) of tertiary oil have been recovered. Microbial activity has increased CO{sub 2} content as indicated by increased alkalinity. A temporary rise in sulfide concentration was experienced. These indicate an active microbial community was generated in the field by the nutrient injection. Pilot area interwell pressure interference test results showed that significant permeability reduction occurred. The interwell permeabilities in the pilot area between the injector and the three pilot production wells were made more uniform which indicates a successful preferential plugging enhanced oil recovery project.

Knapp, R.M.; McInerney, M.J.; Menzie, D.E.; Coates, J.D.; Chisholm, J.L.

1993-05-01T23:59:59.000Z

216

Environmental continuous air monitor inlet with combined preseparator and virtual impactor  

DOE Patents [OSTI]

An inlet for an environmental air monitor is described wherein a pre-separator interfaces with ambient environment air and removes debris and insects commonly associated with high wind outdoors and a deflector plate in communication with incoming air from the pre-separator stage, that directs the air radially and downward uniformly into a plurality of accelerator jets located in a manifold of a virtual impactor, the manifold being cylindrical and having a top, a base, and a wall, with the plurality of accelerator jets being located in the top of the manifold and receiving the directed air and accelerating directed air, thereby creating jets of air penetrating into the manifold, where a major flow is deflected to the walls of the manifold and extracted through ports in the walls. A plurality of receiver nozzles are located in the base of the manifold coaxial with the accelerator jets, and a plurality of matching flow restrictor elements are located in the plurality of receiver nozzles for balancing and equalizing the total minor flow among all the plurality of receiver nozzles, through which a lower, fractional flow extracts large particle constituents of the air for collection on a sample filter after passing through the plurality of receiver nozzles and the plurality of matching flow restrictor elements.

Rodgers, John C. (Santa Fe, NM)

2007-06-19T23:59:59.000Z

217

EIS-0026: Waste Isolation Pilot Plant (WIPP), Carlsbad, New Mexico  

Broader source: Energy.gov [DOE]

The Office of Environmental Restoration and Waste Management prepared this EIS for the Waste Isolation Pilot Plant.

218

Materials performance in coal gasification pilot plants  

SciTech Connect (OSTI)

This paper presents the results of several materials testing projects which were conducted in operating coal gasification pilot plants in the United States. These projects were designed to test potential materials of construction for commercial plants under actual operating conditions. Pilot plants included in the overall test program included the Hygas, Conoco Coal, Synthane, Bi-Gas, Peatgas (Hygas operating with peat), Battelle, U-Gas, Westinghouse (now KRW), General Electric (Gegas), and Mountain Fuel Resources plants. Test results for a large variety of alloys are discussed and conclusions regarding applicability of these materials in coal gasification environments are presented. 14 refs., 2 tabs.

Judkins, R.R.; Bradley, R.A.

1987-10-15T23:59:59.000Z

219

Analytical Model of Tidal Distortion and Dissipation for a Giant Planet with a Viscoelastic Core  

E-Print Network [OSTI]

We present analytical expressions for the tidal Love numbers of a giant planet with a solid core and a fluid envelope. We model the core as a uniform, incompressible, elastic solid, and the envelope as a non-viscous fluid satisfying the $n=1$ polytropic equation of state. We discuss how the Love numbers depend on the size, density, and shear modulus of the core. We then model the core as a viscoelastic Maxwell solid and compute the tidal dissipation rate in the planet as characterized by the imaginary part of the Love number $k_2$. Our results improve upon existing calculations based on planetary models with a solid core and a uniform ($n=0$) envelope. Our analytical expressions for the Love numbers can be applied to study tidal distortion and viscoelastic dissipation of giant planets with solid cores of various rheological properties, and our general method can be extended to study tidal distortion/dissipation of super-earths.

Storch, Natalia I

2015-01-01T23:59:59.000Z

220

Division of Water, Parts 660-661: Tidal Wetlands (New York)  

Broader source: Energy.gov [DOE]

These regulations require permits for any activity which directly or indirectly may have a significant adverse effect on the existing condition of any tidal wetland, including but not limited to...

Note: This page contains sample records for the topic "inlet pilot tidal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

E-Print Network 3.0 - arterial-end tidal carbon Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

kWh range. Typical cost ranges include: Tidal generation - between 16 and 38pkWh Offshore wind - between 15... account of multiple factors for each generation type...

222

Groundwater response to dual tidal fluctuations in a peninsula or an elongated island  

E-Print Network [OSTI]

1 , Hongbin Zhan2,3, *, and Zhonghua Tang1 1 School of Environmental Studies, China University of the tidal fluctuations. This is called quasi-steady state condition *Correspondence to: Hongbin Zhan

Zhan, Hongbin

223

Status of Wave and Tidal Power Technologies for the United States  

SciTech Connect (OSTI)

This paper presents the status of marine applications for renewable energy as of 2008 from a U.S. perspective. Technologies examined include wave, tidal, and ocean current energy extraction devices.

Musial, W.

2008-08-01T23:59:59.000Z

224

Competitive Coevolution versus Objective Fitness for an Autonomous Motorcycle Pilot  

E-Print Network [OSTI]

Competitive Coevolution versus Objective Fitness for an Autonomous Motorcycle Pilot Dana Vrajitoru algorithm to configure a multi-agent probabilistic pilot for single track vehicles (STV) like motorcycles is directed toward piloting aircrafts [7], and cars [9]. Our approach targets motorcycles which have not yet

Vrajitoru, Dana

225

A Modeling Study of the Potential Water Quality Impacts from In-Stream Tidal Energy Extraction  

SciTech Connect (OSTI)

To assess the effects of tidal energy extraction on water quality in a simplified estuarine system, which consists of a tidal bay connected to the coastal ocean through a narrow channel where energy is extracted using in-stream tidal turbines, a three-dimensional coastal ocean model with built-in tidal turbine and water quality modules was applied. The effects of tidal energy extraction on water quality were examined for two energy extraction scenarios as compared with the baseline condition. It was found, in general, that the environmental impacts associated with energy extraction depend highly on the amount of power extracted from the system. Model results indicate that, as a result of energy extraction from the channel, the competition between decreased flushing rates in the bay and increased vertical mixing in the channel directly affects water quality responses in the bay. The decreased flushing rates tend to cause a stronger but negative impact on water quality. On the other hand, the increase of vertical mixing could lead to higher bottom dissolved oxygen at times. As the first modeling effort directly aimed at examining the impacts of tidal energy extraction on estuarine water quality, this study demonstrates that numerical models can serve as a very useful tool for this purpose. However, more careful efforts are warranted to address system-specific environmental issues in real-world, complex estuarine systems.

Wang, Taiping; Yang, Zhaoqing; Copping, Andrea E.

2013-11-09T23:59:59.000Z

226

Gravitational self-force corrections to two-body tidal interactions and the effective one-body formalism  

E-Print Network [OSTI]

Tidal interactions have a significant influence on the late dynamics of compact binary systems, which constitute the prime targets of the upcoming network of gravitational-wave detectors. We refine the theoretical description of tidal interactions (hitherto known only to the second post-Newtonian level) by extending our recently developed analytic self-force formalism, for extreme mass-ratio binary systems, to the computation of several tidal invariants. Specifically, we compute, to linear order in the mass ratio and to the 7.5$^{\\rm th}$ post-Newtonian order, the following tidal invariants: the square and the cube of the gravitoelectric quadrupolar tidal tensor, the square of the gravitomagnetic quadrupolar tidal tensor, and the square of the gravitoelectric octupolar tidal tensor. Our high-accuracy analytic results are compared to recent numerical self-force tidal data by Dolan et al. \\cite{Dolan:2014pja}, and, notably, provide an analytic understanding of the light ring asymptotic behavior found by them. We transcribe our kinematical tidal-invariant results in the more dynamically significant effective one-body description of the tidal interaction energy. By combining, in a synergetic manner, analytical and numerical results, we provide simple, accurate analytic representations of the global, strong-field behavior of the gravitoelectric quadrupolar tidal factor. A striking finding is that the linear-in-mass-ratio piece in the latter tidal factor changes sign in the strong-field domain, to become negative (while its previously known second post-Newtonian approximant was always positive). We, however, argue that this will be more than compensated by a probable fast growth, in the strong-field domain, of the nonlinear-in-mass-ratio contributions in the tidal factor.

Donato Bini; Thibault Damour

2014-09-24T23:59:59.000Z

227

Intro to NREL's Thermochemical Pilot Plant  

ScienceCinema (OSTI)

NREL's Thermochemical Pilot Plant converts biomass into higher hydrocarbon fuels and chemicals.NREL is researching biomass pyrolysis. The lab is examining how to upgrade bio-oils via stabilization. Along with this, NREL is developing the engineering system requirements for producing these fuels and chemicals at larger scales.

Magrini, Kim

2014-06-10T23:59:59.000Z

228

Intro to NREL's Thermochemical Pilot Plant  

SciTech Connect (OSTI)

NREL's Thermochemical Pilot Plant converts biomass into higher hydrocarbon fuels and chemicals.NREL is researching biomass pyrolysis. The lab is examining how to upgrade bio-oils via stabilization. Along with this, NREL is developing the engineering system requirements for producing these fuels and chemicals at larger scales.

Magrini, Kim

2013-09-27T23:59:59.000Z

229

Argonne National Laboratory's Recycling Pilot Plant  

ScienceCinema (OSTI)

Argonne has a Recycling Pilot Plant designed to save the non-metal portions of junked cars. Here, program managers demonstrate how plastic shredder residue can be recycled. (Currently these automotive leftovers are sent to landfills.) For more information, visit Argonne's Transportation Technology R&D Center Web site at http://www.transportation.anl.gov.

Spangenberger, Jeff; Jody, Sam;

2013-04-19T23:59:59.000Z

230

Thermochemical Conversion Pilot Plant (Fact Sheet)  

SciTech Connect (OSTI)

The state-of-the-art thermochemical conversion pilot plant includes several configurable, complementary unit operations for testing and developing various reactors, filters, catalysts, and other unit operations. NREL engineers and scientists as well as clients can test new processes and feedstocks in a timely, cost-effective, and safe manner to obtain extensive performance data on processes or equipment.

Not Available

2013-06-01T23:59:59.000Z

231

SkyMine Carbon Mineralization Pilot Project  

SciTech Connect (OSTI)

This Topical Report addresses accomplishments achieved during Phase 2b of the SkyMine® Carbon Mineralization Pilot Project. The primary objectives of this project are to design, construct, and operate a system to capture CO2 from a slipstream of flue gas from a commercial coal-fired cement kiln, convert that CO2 to products having commercial value (i.e., beneficial use), show the economic viability of the CO2 capture and conversion process, and thereby advance the technology to the point of readiness for commercial scale demonstration and deployment. The overall process is carbon negative, resulting in mineralization of CO2 that would otherwise be released into the atmosphere. The project will also substantiate market opportunities for the technology by sales of chemicals into existing markets, and identify opportunities to improve technology performance and reduce costs at the commercial scale. The project is being conducted in two phases. The primary objectives of Phase 1 were to evaluate proven SkyMine® process chemistry for commercial pilot-scale operation and complete the preliminary design for the pilot plant to be built and operated in Phase 2, complete a NEPA evaluation, and develop a comprehensive carbon life cycle analysis. The objective of Phase 2b was to build the pilot plant to be operated and tested in Phase 2c.

Christenson, Norm; Walters, Jerel

2014-12-31T23:59:59.000Z

232

46th Street Pilot Street Lighting Project  

E-Print Network [OSTI]

Street to 48th Street) as standard high-pressure sodium (HPS) lighting comparison corridor #12;The over time #12;Initial Lighting Comparison #12;Lighting Project Location #12;Street Light Layout 3046th Street Pilot Street Lighting Project A Joint Venture: Hennepin County & City of Minneapolis

Minnesota, University of

233

New Summer Pilot Course 2013 Biodiversity Informatics  

E-Print Network [OSTI]

to advanced under- graduates and graduate students interested in biodiversity, conservation biology, dataNew Summer Pilot Course ­ 2013 Biodiversity Informatics (BIO 494 / BIO 598 ­ 2 Credits) June 17 Franz, David Patterson, Ed Gilbert Contact nico.franz@asu.edu for additional information Biodiversity

Franz, Nico M.

234

Decision Support System for Fighter Pilots  

E-Print Network [OSTI]

parts of the electronic warfare domain. A brief description of this domain is given. It contains is detected the pilot may choose to deploy electronic countermeasures to avoid the impact of the missile, and the availability of countermeasures. Radar systems, guidance of missiles, and electronic countermeasures are all

235

A Pilot Plant: The Fastest Path to  

E-Print Network [OSTI]

Key Science Needs for a Technically Sound MFE Pilot Plant Design Integrated Plasma Material Interface Plant Design? (2) Integrated Plasma-Materials Interface · High heat and particle flux and fluence · What seconds in 2028. The MFE Program Needs to Move Faster Implications Building a Component Test Facility

236

SKA as a powerful hunter of jetted Tidal Disruption Events  

E-Print Network [OSTI]

Observational consequences of the tidal disruption of stars by supermassive black holes (SMBHs) can enable us to discover quiescent SMBHs and constrain their mass function. Moreover, observing jetted TDEs (from previously non-active galaxies) provides us with a new means of studying the early phases of jet formation and evolution in an otherwise "pristine" environment. Although several (tens) TDEs have been discovered since 1999, only two jetted TDEs have been recently discovered in hard X-rays, and only one, Swift J1644+57, has a precise localization which further supports the TDE interpretation. These events alone are not sufficient to address those science issues, which require a substantial increase of the current sample. Despite the way they were discovered, the highest discovery potential for {\\em jetted} TDEs is not held by current and up-coming X-ray instruments, which will yield only a few to a few tens events per year. In fact, the best strategy is to use the Square Kilometer Array to detect TDEs an...

Donnarumma, I; Fender, R; Komossa, S; Paragi, Z; Van Velzen, S; Prandoni, I

2015-01-01T23:59:59.000Z

237

"Circularization" vs. Accretion -- What Powers Tidal Disruption Events?  

E-Print Network [OSTI]

A tidal disruption event (TDE) takes place when a star passes near enough to a massive black hole to be disrupted. About half the star's matter is given elliptical trajectories with large apocenter distances, the other half is unbound. To "circularize", i.e., to form an accretion flow, the bound matter must lose a significant amount of energy, with the actual amount depending on the characteristic scale of the flow measured in units of the black hole's gravitational radius (~ 10^{51} (R/1000R_g)^{-1} erg). Recent numerical simulations (Shiokawa et al., 2015) have revealed that the circularization scale is close to the scale of the most-bound initial orbits, ~ 10^3 M_{BH,6.5}^{-2/3} R_g ~ 10^{15} M_{BH,6.5}^{1/3} cm from the black hole, and the corresponding circularization energy dissipation rate is $\\sim 10^{44} M_{BH,6.5}^{-1/6}$~erg/s. We suggest that the energy liberated during circularization, rather then energy liberated by accretion onto the black hole, powers the observed optical TDE candidates (e.g.A...

Piran, Tsvi; Krolik, Julian; Cheng, Roseanne M; Shiokawa, Hotaka

2015-01-01T23:59:59.000Z

238

On tidal capture of primordial black holes by neutron stars  

E-Print Network [OSTI]

The fraction of primordial black holes (PBHs) of masses $10^{17} - 10^{26}$ g in the total amount of dark matter may be constrained by considering their capture by neutron stars (NSs), which leads to the rapid destruction of the latter. The constraints depend crucially on the capture rate which, in turn, is determined by the energy loss by a PBH passing through a NS. Two alternative approaches to estimate the energy loss have been used in the literature: the one based on the dynamical friction mechanism, and another on tidal deformations of the NS by the PBH. The second mechanism was claimed to be more efficient by several orders of magnitude due to the excitation of particular oscillation modes reminiscent of the surface waves. We address this disagreement by considering a simple analytically solvable model that consists of a flat incompressible fluid in an external gravitational field. In this model, we calculate the energy loss by a PBH traversing the fluid surface. We find that the excitation of modes with the propagation velocity smaller than that of PBH is suppressed, which implies that in a realistic situation of a supersonic PBH the large contributions from the surface waves are absent and the above two approaches lead to consistent expressions for the energy loss.

Guillaume Defillon; Etienne Granet; Petr Tinyakov; Michel H. G. Tytgat

2014-09-01T23:59:59.000Z

239

Investigation of the nonlinear response of turbulent premixed flames to imposed inlet velocity oscillations  

SciTech Connect (OSTI)

Acoustically forced lean premixed turbulent bluff-body stabilized flames are investigated using turbulent combustion CFD. The calculations simulate aspects of the experimental investigation by Balachandran et al. [R. Balachandran, B. Ayoola, C. Kaminski, A. Dowling, E. Mastorakos, Combust. Flame 143 (2005) 37-55] and focus on the amplitude dependence of the flame response. For the frequencies of interest in this investigation an unsteady Reynolds-averaged Navier-Stokes (URANS) approach is appropriate. The combustion is represented using a modified laminar flamelet approach with an algebraic representation of the flame surface density. The predictions are compared with flame surface density (FSD) and OH* chemiluminescence measurements. In the experiments the response of the flame has been quantified by means of a number of single-frequency, amplitude-dependent transfer functions. The predicted flame shape and position are in good agreement with the experiment. The dynamic response of the flame to inlet velocity forcing is also well captured by the calculations. At moderate frequencies nonlinear behavior of the transfer functions is observed as the forcing amplitude is increased. In the experiments this nonlinearity was attributed in part to the rollup of the reacting shear layer into vortices and in part to the collision of the inner and outer flame sheets. This transition to nonlinearity is also observed in the transfer functions obtained from the predictions. Furthermore, the vortex shedding and flame-sheet collapse may be seen in snapshots of the predicted flow field taken throughout the forcing cycle. The URANS methodology successfully predicts the behavior of the forced premixed turbulent flames and captures the effects of saturation in the transfer function of the response of the heat release to velocity fluctuations. (author)

Armitage, C.A.; Mastorakos, E.; Cant, R.S. [Department of Engineering, Trumpington Street, University of Cambridge, Cambridge, CB2 1PZ (United Kingdom); Balachandran, R. [Department of Mechanical Engineering, University College London, Torrington Place, London, WC1E 7JE (United Kingdom)

2006-08-15T23:59:59.000Z

240

Choked-Flow Inlet Orifice Bubbler for Creating Small Bubbles in Mercury  

SciTech Connect (OSTI)

Pressure waves created in liquid mercury pulsed spallation targets like the Spallation Neutron Source (SNS) at Oak Ridge National Laboratory, induce cavitation damage on the target container. The cavitation damage is thought to limit the lifetime of the target for power levels at and above 1 MW. One way to mitigate the damage would be to absorb the pressure pulse energy into a dispersed population of small bubbles, however, creating a bubble size distribution that is sufficiently large and disperse in mercury is challenging due to the high surface tension. Also, measuring the population is complicated by the opacity and the high level of turbulent mixing. Recent advances in bubble diagnostics by batch sampling the mercury made it possible to compare bubble populations for different techniques in a SNS-1/20th scale test loop. More than 10 bubblers were tested and the most productive bubblers were taken for in-beam testing at the Los Alamos Neutron Science Center (LANSCE) WNR user facility. One bubbler design, referred to as the inlet-orifice bubbler, that showed moderate success in creating populations also has an added advantage that it could easily be included in the existing SNS full-scale mercury target configuration. Improvements to the bubbler were planned including a reduction of the nozzle size to choke the gas injection, thus steadying the injected mass flow and allowing multiple nozzles to work off of a common plenum. For the first time, reliable bubble population data are available in the prototypical target geometry and can be compared with populations that mitigated cavitation damage. This paper presents those experimental results.

Wendel, Mark W [ORNL] [ORNL; Abdou, Ashraf A [ORNL] [ORNL; Riemer, Bernie [ORNL] [ORNL

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "inlet pilot tidal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Modeling of In-stream Tidal Energy Development and its Potential Effects in Tacoma Narrows, Washington, USA  

SciTech Connect (OSTI)

Understanding and providing proactive information on the potential for tidal energy projects to cause changes to the physical system and to key water quality constituents in tidal waters is a necessary and cost-effective means to avoid costly regulatory involvement and late stage surprises in the permitting process. This paper presents a modeling study for evaluating the tidal energy extraction and its potential impacts on the marine environment in a real world site - Tacoma Narrows of Puget Sound, Washington State, USA. An unstructured-grid coastal ocean model, fitted with a module that simulates tidal energy devices, was applied to simulate the tidal energy extracted by different turbine array configurations and the potential effects of the extraction at local and system-wide scales in Tacoma Narrows and South Puget Sound. Model results demonstrated the advantage of an unstructured-grid model for simulating the far-field effects of tidal energy extraction in a large model domain, as well as assessing the near-field effect using a fine grid resolution near the tidal turbines. The outcome shows that a realistic near-term deployment scenario extracts a very small fraction of the total tidal energy in the system and that system wide environmental effects are not likely; however, near-field effects on the flow field and bed shear stress in the area of tidal turbine farm are more likely. Model results also indicate that from a practical standpoint, hydrodynamic or water quality effects are not likely to be the limiting factor for development of large commercial-scale tidal farms. Results indicate that very high numbers of turbines are required to significantly alter the tidal system; limitations on marine space or other environmental concerns are likely to be reached before reaching these deployment levels. These findings show that important information obtained from numerical modeling can be used to inform regulatory and policy processes for tidal energy development.

Yang, Zhaoqing; Wang, Taiping; Copping, Andrea E.; Geerlofs, Simon H.

2014-10-01T23:59:59.000Z

242

THE INFLUENCE OF ORBITAL ECCENTRICITY ON TIDAL RADII OF STAR CLUSTERS  

SciTech Connect (OSTI)

We have performed N-body simulations of star clusters orbiting in a spherically symmetric smooth galactic potential. The model clusters cover a range of initial half-mass radii and orbital eccentricities in order to test the historical assumption that the tidal radius of a cluster is imposed at perigalacticon. The traditional assumption for globular clusters is that since the internal relaxation time is larger than its orbital period, the cluster is tidally stripped at perigalacticon. Instead, our simulations show that a cluster with an eccentric orbit does not need to fully relax in order to expand. After a perigalactic pass, a cluster recaptures previously unbound stars, and the tidal shock at perigalacticon has the effect of energizing inner region stars to larger orbits. Therefore, instead of the limiting radius being imposed at perigalacticon, it more nearly traces the instantaneous tidal radius of the cluster at any point in the orbit. We present a numerical correction factor to theoretical tidal radii calculated at perigalacticon which takes into consideration both the orbital eccentricity and current orbital phase of the cluster.

Webb, Jeremy J.; Harris, William E.; Sills, Alison [Department of Physics and Astronomy, McMaster University, Hamilton, ON L8S 4M1 (Canada)] [Department of Physics and Astronomy, McMaster University, Hamilton, ON L8S 4M1 (Canada); Hurley, Jarrod R., E-mail: webbjj@mcmaster.ca [Centre for Astrophysics and Supercomputing, Swinburne University of Technology, P.O. Box 218, VIC 3122 (Australia)

2013-02-20T23:59:59.000Z

243

General Relativistic Hydrodynamic Simulation of Accretion Flow from a Stellar Tidal Disruption  

E-Print Network [OSTI]

We study how the matter dispersed when a supermassive black hole tidally disrupts a star joins an accretion flow. Combining a relativistic hydrodynamic simulation of the stellar disruption with a relativistic hydrodynamics simulation of the tidal debris motion, we track such a system until ~80% of the stellar mass bound to the black hole has settled into an accretion flow. Shocks near the stellar pericenter and also near the apocenter of the most tightly-bound debris dissipate orbital energy, but only enough to make the characteristic radius comparable to the semi-major axis of the most-bound material, not the tidal radius as previously thought. The outer shocks are caused by post-Newtonian effects, both on the stellar orbit during its disruption and on the tidal forces. Accumulation of mass into the accretion flow is non-monotonic and slow, requiring ~3--10x the orbital period of the most tightly-bound tidal streams, while the inflow time for most of the mass may be comparable to or longer than the mass accu...

Shiokawa, Hotaka; Cheng, Roseanne M; Piran, Tsvi; Noble, Scott C

2015-01-01T23:59:59.000Z

244

SkyMine Carbon Mineralization Pilot Project  

SciTech Connect (OSTI)

This Topical Report addresses accomplishments achieved during Phase 1 of the SkyMine{reg_sign} Carbon Mineralization Pilot Project. The primary objectives of this project are to design, construct, and operate a system to capture CO{sub 2} from a slipstream of flue gas from a commercial coal-fired cement kiln, convert that CO{sub 2} to products having commercial value (i.e., beneficial use), show the economic viability of the CO{sub 2} capture and conversion process, and thereby advance the technology to a point of readiness for commercial scale demonstration and proliferation. The project will also substantiate market opportunities for the technology by sales of chemicals into existing markets, and identify opportunities to improve technology performance and reduce costs at commercial scale. The primary objectives of Phase 1 of the project were to elaborate proven SkyMine{reg_sign} process chemistry to commercial pilot-scale operation and complete the preliminary design ('Reference Plant Design') for the pilot plant to be built and operated in Phase 2. Additionally, during Phase 1, information necessary to inform a DOE determination regarding NEPA requirements for the project was developed, and a comprehensive carbon lifecycle analysis was completed. These items were included in the formal application for funding under Phase 2. All Phase 1 objectives were successfully met on schedule and within budget.

Joe Jones; Clive Barton; Mark Clayton; Al Yablonsky; David Legere

2010-09-30T23:59:59.000Z

245

Ambient Monitoring for Sinclair and Dyes Inlets, Puget Sound, Washington: Chemical Analyses for 2010 Regional Mussel Watch (AMB02)  

SciTech Connect (OSTI)

The Puget Sound Naval Shipyard & Intermediate Maintenance Facility (PSNS&IMF) and Naval Base Kitsap-Bremerton (Shipyard) located in Bremerton, WA are committed to a culture of continuous process improvement for all aspects of Shipyard operations, including reducing the releases of hazardous materials and waste in discharges from the Shipyard. Under the Project ENVVEST Final Project Agreement, a cooperative project among PSNS&IMF, the Environmental Protection Agency (EPA), and the Washington State Department of Ecology (Ecology), and local stakeholders (US Navy, EPA and Ecology 2002) has been helping to improve the environmental quality of the Sinclair and Dyes Inlet Watershed (ENVVEST 2006). An ambient monitoring program for sediment, water, and indigenous mussels began in 2009 to assess the status and trend of ecological resources, assess the effectiveness of cleanup and pollution control measures, and determine if discharges from all sources are protective of beneficial uses including aquatic life. This document presents the 2010 chemical residue data and stable isotopes of carbon (?13C) and nitrogen (?15N) for the regional mussel watch stations located in Sinclair Inlet, Dyes Inlet, Port Orchard Passage, Rich Passage, Agate Passage, Liberty Bay, and Keyport Lagoon. Indigenous bivalves were collected from a small boat and/or from along the shoreline, measured, composited, and analyzed for a suite of trace metals and organic contaminants. The trace metals included silver, arsenic, cadmium, chromium, copper, mercury, nickel, lead, and zinc. The organic contaminants included the list of NOAA Status and Trends 20 polychlorinated biphenyls (PCB) congeners and suite of parent and methylated polycyclic aromatic hydrocarbons (PAHs). These chemical residue data provide the first year of the biota ambient monitoring.

Brandenberger, Jill M.; Kuo, Li-Jung; Suslick, Carolynn R.; Johnston, Robert K.

2010-10-20T23:59:59.000Z

246

Pilot-Scale Biorefinery: Sustainable Transport Fuels from Biomass...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Pilot-Scale Biorefinery: Sustainable Transport Fuels from Biomass via Integrated Pyrolysis, Catalytic Hydroconversion and Co-processing with Vacuum Gas Oil Raymond G. Wissinger...

247

Federal Highway Administration - Pilot Car Escort - Best Practices...  

Open Energy Info (EERE)

Federal Highway Administration - Pilot Car Escort - Best Practices Guidelines Jump to: navigation, search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance -...

248

ENVIRONMENTAL ASSESSMENT OCEAN THERMAL ENERGY CONVERSION (OTEC) PILOT PLANTS  

E-Print Network [OSTI]

Sands. 1980. Ocean thermal energy conversion (OTEC) pilotCommercial ocean thermal energy conversion (OTEC) plants byof the Fifth Ocean Thermal Energy Conversion Conference,

Sullivan, S.M.

2014-01-01T23:59:59.000Z

249

On the Piloted Ignition of Solid Fuels in Spacecraft Environments  

E-Print Network [OSTI]

Describing the Steady-State Gasification of Bubble-FormingEffects on the Endothermic Gasification and Piloted Ignitionon Nonflaming Transient Gasification of PMMA and PE During

Fereres-Rapoport, Sonya M.

2011-01-01T23:59:59.000Z

250

Modeling Tomorrow's Biorefinery--the NREL Biochemical Pilot Plant  

SciTech Connect (OSTI)

Brochure describing the capabilities of NREL's Biochemical Pilot Plant. In this facility, researchers test ideas for creating high-value products from cellulosic biomass.

Not Available

2008-03-01T23:59:59.000Z

251

Independent Oversight Review, Waste Isolation Pilot Plant - November...  

Energy Savers [EERE]

Safety and Security (HSS), conducted an independent review of the U.S. Department of Energy (DOE) Waste Isolation Pilot Plant (WIPP) preparedness for severe natural phenomena...

252

Building America Whole-House Solutions for Existing Homes: Pilot...  

Broader source: Energy.gov (indexed) [DOE]

Florida Homes - Central and South Florida (Fact Sheet) In this pilot project, the Florida Solar Energy Center and Florida Power and Light are collaborating to retrofit a large...

253

Alternative Fuel and Advanced Technology Vehicles Pilot Program...  

Open Energy Info (EERE)

Program Emissions Benefit Tool Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Alternative Fuel and Advanced Technology Vehicles Pilot Program Emissions Benefit Tool...

254

airline pilots: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

owners: an Oxfordshire pilot 208 ORIGINAL PAPER Eric J. Hall Basil V. Worgul Lubomir Smilenov Biology and Medicine Websites Summary: of ocular cataracts at younger ages has been...

255

Microsoft Word - Outdoor Small- and Pilot-Scale Research and...  

Broader source: Energy.gov (indexed) [DOE]

regulations); conventional laboratory operations (such as preparation of chemical standards and sample analysis); and small-scale pilot projects (generally less than 2...

256

ENVIRONMENTAL ASSESSMENT OCEAN THERMAL ENERGY CONVERSION (OTEC) PILOT PLANTS  

E-Print Network [OSTI]

Commercial ocean thermal energy conversion (OTEC) plants byof the Fifth Ocean Thermal Energy Conversion Conference,Sands. 1980. Ocean thermal energy conversion (OTEC) pilot

Sullivan, S.M.

2014-01-01T23:59:59.000Z

257

DRAFT. ENVIRONMENTAL ASSESSMENT OCEAN THERMAL ENERGY CONVERSION (OTEC) PILOT PLANTS  

E-Print Network [OSTI]

Commercial ocean thermal energy conversion ( OTEC) plants bySands. Ocean thermal energy conversion (OTEC) pilot plantof the Ocean Thermal Energy Conversion (OTEC) Biofouling,

Sullivan, S.M.

2014-01-01T23:59:59.000Z

258

ClearFuels-Rentech Pilot-Scale Biorefinery  

Broader source: Energy.gov [DOE]

The ClearFuels-Rentech pilot-scale biorefinery will use Fisher-Tropsch gas-to-liquids technology to create diesel and jet fuel.

259

Controlled pilot oxidizer for a gas turbine combustor  

DOE Patents [OSTI]

A combustor (22) for a gas turbine (10) includes a main burner oxidizer flow path (34) delivering a first portion (32) of an oxidizer flow (e.g., 16) to a main burner (28) of the combustor and a pilot oxidizer flow path (38) delivering a second portion (36) of the oxidizer flow to a pilot (30) of the combustor. The combustor also includes a flow controller (42) disposed in the pilot oxidizer flow path for controlling an amount of the second portion delivered to the pilot.

Laster, Walter R. (Oviedo, FL); Bandaru, Ramarao V. (Greer, SC)

2010-07-13T23:59:59.000Z

260

San Diego Hero Alliance: Community-Based Social Marketing Pilot...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Social Marketing Pilot Program Presents an overview of the California Center for Sustainable Energy's community-based social marketing strategies to promote home energy...

Note: This page contains sample records for the topic "inlet pilot tidal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

ENVIRONMENTAL ASSESSMENT OCEAN THERMAL ENERGY CONVERSION (OTEC) PILOT PLANTS  

E-Print Network [OSTI]

1979. Commercial ocean thermal energy conversion (OTEC)of the Fifth Ocean Thermal Energy Conversion Conference,Sands. 1980. Ocean thermal energy conversion (OTEC) pilot

Sullivan, S.M.

2014-01-01T23:59:59.000Z

262

A model-dye comparison experiment in the tidal mixing front zone on the southern flank of Georges Bank  

E-Print Network [OSTI]

A model-dye comparison experiment in the tidal mixing front zone on the southern flank of Georges; revised 8 June 2007; accepted 30 October 2007; published 9 February 2008. [1] A process-oriented model-dye the observed movement of dye across the tidal mixing front on the southern flank of Georges Bank during 22

Chen, Changsheng

263

A comparison of measured and modeled tidal currents in the Gulf of Maine  

E-Print Network [OSTI]

to the persistence of the clockwise circulation around the Bank (Garrett er al. , 1978). Loder (1980) has shown theoretically that rectification of the strong semidiurnal tidal current across the steeply sloping northern edge of Georges Bank can produce a... astronomical forcing (Garrett, 1972; Brown and Moody, 1987). Garrett (1972) estimated the natural period of the Gulf of Maine-Bay of Fundy basin to be 13. 3M. 4 hours, which is near the frequency of the semidiurnal tidal constituents. Since the M2 semidiurnal...

Cook, Michael S

1990-01-01T23:59:59.000Z

264

Tidal hydraulics of San Luis Pass, Texas: a field and numerical investigation  

E-Print Network [OSTI]

TIDAL HYDPAULICS OF SAN LUIS PASS, TEXAS: A FIELD AND VBKRICAL INSTIGATION A Thesis by SCOTT JEROME MORTON Submitted to the Graduate College of Texas A(II University in partial fulfillment of the requirement for the degree of MASTER... OF SCIENCE August 1980 i&Iajor Subject: Ocean Engineering TIDAL HyDRAULICS OF SAN LUIS PASS, TEXAS: A FIELD AND M&IERICAL INVESTIGATION A Thesis by SCOTI' JEROIIE MORTON Approved as to style and content by: (C?airman of Committee) (Member) /member...

Morton, Scott Jerome

1980-01-01T23:59:59.000Z

265

Application to Export Electric Energy OE Docket No. EA-383 Pilot...  

Broader source: Energy.gov (indexed) [DOE]

Power Group, Inc Application from Pilot Power Group, Inc. to export electric energy to Mexico. EA-383 Pilot Power Group.pdf More Documents & Publications EA-383 Pilot Power...

266

Feasibility of Tidal and Ocean Current Energy in False Pass, Aleutian Islands, Alaska FINAL REPORT  

SciTech Connect (OSTI)

The Aleutian Pribilof Islands Association was awarded a U.S. Department of Energy Tribal Energy Program grant (DE-EE0005624) for the Feasibility of Tidal and Ocean Current Energy in False Pass, Aleutian Islands, Alaska (Project). The goal of the Project was to perform a feasibility study to determine if a tidal energy project would be a viable means to generate electricity and heat to meet long-term fossil fuel use reduction goals, specifically to produce at least 30% of the electrical and heating needs of the tribally-owned buildings in False Pass. The Project Team included the Aleut Region organizations comprised of the Aleutian Pribilof Island Association (APIA), and Aleutian Pribilof Island Community Development Association (APICDA); the University of Alaska Anchorage, ORPC Alaska a wholly-owned subsidiary of Ocean Renewable Power Company (ORPC), City of False Pass, Benthic GeoScience, and the National Renewable Energy Laboratory (NREL). The following Project objectives were completed: collected existing bathymetric, tidal, and ocean current data to develop a basic model of current circulation at False Pass, measured current velocities at two sites for a full lunar cycle to establish the viability of the current resource, collected data on transmission infrastructure, electrical loads, and electrical generation at False Pass, performed economic analysis based on current costs of energy and amount of energy anticipated from and costs associated with the tidal energy project conceptual design and scoped environmental issues. Utilizing circulation modeling, the Project Team identified two target sites with strong potential for robust tidal energy resources in Isanotski Strait and another nearer the City of False Pass. In addition, the Project Team completed a survey of the electrical infrastructure, which identified likely sites of interconnection and clarified required transmission distances from the tidal energy resources. Based on resource and electrical data, the Project Team developed a conceptual tidal energy project design utilizing ORPC’s TidGen® Power System. While the Project Team has not committed to ORPC technology for future development of a False Pass project, this conceptual design was critical to informing the Project’s economic analysis. The results showed that power from a tidal energy project could be provided to the City of False at a rate at or below the cost of diesel generated electricity and sold to commercial customers at rates competitive with current market rates, providing a stable, flat priced, environmentally sound alternative to the diesel generation currently utilized for energy in the community. The Project Team concluded that with additional grants and private investment a tidal energy project at False Pass is well-positioned to be the first tidal energy project to be developed in Alaska, and the first tidal energy project to be interconnected to an isolated micro grid in the world. A viable project will be a model for similar projects in coastal Alaska.

Wright, Bruce Albert [Aleutian Pribilof Islands Association] [Aleutian Pribilof Islands Association

2014-05-07T23:59:59.000Z

267

E-Print Network 3.0 - agreement pilot project Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Pilot Projects. The purpose of the brownfields pilots... , could learn from. This section examines ten brownfields ... Source: Delaware, University of - Center for Energy...

268

ERCOT's Weather Sensitive Demand Response Pilot  

E-Print Network [OSTI]

ERCOT’s Weather Sensitive Demand Response Pilot CATEE 12-17-13 ESL-KT-13-12-21 CATEE 2013: Clean Air Through Energy Efficiency Conference, San Antonio, Texas Dec. 16-18 Disclaimer The information contained in this report has been obtained from... services along with other information about our business is available online at constellation.com. ESL-KT-13-12-21 CATEE 2013: Clean Air Through Energy Efficiency Conference, San Antonio, Texas Dec. 16-18 Demand Response in ERCOT CATEE 121313 - Tim Carter...

Carter, T.

2013-01-01T23:59:59.000Z

269

Pilot Power Group Inc | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating Solar Powerstories onFocusOskiPhilips Color Kinetics Jump to:PiedmontMauna LoaPilot

270

WINDExchange: Wind for Schools Pilot Project Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched Ferromagnetism inS-4500IIVasudhaSurface.Laboratory in Golden,WIMapPilot Project

271

Technologist in Residence Pilot | Department of Energy  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security AdministrationcontrollerNanocrystallineForeign ObjectOUR8,MaterialsTechnologist in Residence Pilot

272

Microsoft PowerPoint - TIR Pilot Webinar  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGY TAX POLICIES7.pdfFuel2007NavalMelvin G.Workforce in Louisiana Stephen R. Barnes,Pilot

273

A numerical study of horizontal dispersion in a macro tidal basin  

E-Print Network [OSTI]

in Cobscook Bay, a macro tidal basin, is simulated using the three-dimensional, nonlinear, finite element regimes in different parts of Cobscook Bay. It is found that the effective Lagrangian dispersion ocean model, QUODDY_dry. Numerical particles are released from various transects in the bay at different

Maine, University of

274

Numerical study of the diapycnal flow through a tidal front with passive tracers  

E-Print Network [OSTI]

. This qualitatively agrees with a recent field experiment using a dye tracer on Georges Bank. Additional experiments are performed to investigate the sensitivity of the tracer dispersion to the tidal phase and the location, the previous studies indicated Eulerian cross-front mean circu- lation maybe is in a multiple-cell structure

Dong, Changming "Charles"

275

Seasonal variations of semidiurnal tidal perturbations in mesopause region temperature and zonal and meridional winds above  

E-Print Network [OSTI]

.1029/2007JD009687. 1. Introduction [2] Solar thermal tides are global-scale waves that dom- inate to conserve wave energy. When propagating into the MLT region, the horizontal wind tidal amplitude can reach with fluorescence lidar's advantages of high temporal and spatial resolution and the capability of full diurnal

276

Role of ocean heat transport in climates of tidally locked exoplanets around M dwarf stars  

E-Print Network [OSTI]

stellar radiation, ocean heat transport can even lead to complete deglaciation of the nightside. OurRole of ocean heat transport in climates of tidally locked exoplanets around M dwarf stars Yongyun Hu1 and Jun Yang Laboratory for Climate and Atmosphere­Ocean Studies, Department of Atmospheric

Hu, Yongyun

277

PHYSIOLOGICAL PERFORMANCE OF INTERTIDAL CORALLINE ALGAE DURING A SIMULATED TIDAL CYCLE1  

E-Print Network [OSTI]

PHYSIOLOGICAL PERFORMANCE OF INTERTIDAL CORALLINE ALGAE DURING A SIMULATED TIDAL CYCLE1 Rebecca J, Lobban and Harrison 1997, Helmuth and Hofmann 2001). During high tide, intertidal algae are underwater algae may be emerged and exposed to increased light stress, elevated air tem- peratures, and increased

Martone, Patrick T.

278

Tidal Interactions and Disruptions of Giant Planets on Highly Eccentric Orbits  

E-Print Network [OSTI]

We calculate the evolution of planets undergoing a strong tidal encounter using smoothed particle hydrodynamics (SPH), for a range of periastron separations. We find that outside the Roche limit, the evolution of the planet is well-described by the standard model of linear, non-radial, adiabatic oscillations. If the planet passes within the Roche limit at periastron, however, mass can be stripped from it, but in no case do we find enough energy transferred to the planet to lead to complete disruption. In light of the three new extrasolar planets discovered with periods shorter than two days, we argue that the shortest-period cases observed in the period-mass relation may be explained by a model whereby planets undergo strong tidal encounters with stars, after either being scattered by dynamical interactions into highly eccentric orbits, or tidally captured from nearly parabolic orbits. Although this scenario does provide a natural explanation for the edge found for planets at twice the Roche limit, it does not explain how such planets will survive the inevitable expansion that results from energy injection during tidal circularization.

Joshua A. Faber; Frederic A. Rasio; Bart Willems

2004-11-15T23:59:59.000Z

279

Gravity and tectonic patterns of Mercury: Effect of tidal deformation, spin-orbit resonance, nonzero  

E-Print Network [OSTI]

Gravity and tectonic patterns of Mercury: Effect of tidal deformation, spin-orbit resonance of spin-orbit resonance, nonzero eccentricity, despinning, and reorientation on Mercury's gravity and tectonic pattern. Large variations of the gravity and shape coefficients from the synchronous rotation

Nimmo, Francis

280

Covariation of coastal water temperature and microbial pollution at interannual to tidal periods  

E-Print Network [OSTI]

Covariation of coastal water temperature and microbial pollution at interannual to tidal periods, California, USA Daniel B. Lluch-Cota Centro de Investigaciones Biologicas del Noroeste, La Paz, Mexico-period cooling are coincident with elevated levels of microbial pollution in the surf zone. This relationship can

Winant, Clinton D.

Note: This page contains sample records for the topic "inlet pilot tidal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Nitrogen Cycling and Ecosystem Exchanges in a Virginia Tidal Freshwater Marsh  

E-Print Network [OSTI]

loading due to watershed development and urbanization. We present a process-based mass balance model of N habitats for juvenile fishes, and buffering storm and flood waters (Odum et al. 1984; Mitsch and Gosselink dominated tidal freshwater marsh in the York River estuary, Virginia. The model, which was based

Neubauer, Scott C.

282

Final Report for Sea-level Rise Response Modeling for San Francisco Bay Estuary Tidal  

E-Print Network [OSTI]

i Final Report for Sea-level Rise Response Modeling for San Francisco Bay Estuary Tidal Marshes Refuge in northern San Francisco Bay, California. #12;iii Final Report for Sea-level Rise Response)................................................................... 7 Sea-level rise scenario model inputs

Fleskes, Joe

283

A CLASS OF ECCENTRIC BINARIES WITH DYNAMIC TIDAL DISTORTIONS DISCOVERED WITH KEPLER  

SciTech Connect (OSTI)

We have discovered a class of eccentric binary systems within the Kepler data archive that have dynamic tidal distortions and tidally induced pulsations. Each has a uniquely shaped light curve that is characterized by periodic brightening or variability at timescales of 4-20 days, frequently accompanied by shorter period oscillations. We can explain the dominant features of the entire class with orbitally varying tidal forces that occur in close, eccentric binary systems. The large variety of light curve shapes arises from viewing systems at different angles. This hypothesis is supported by spectroscopic radial velocity measurements for five systems, each showing evidence of being in an eccentric binary system. Prior to the discovery of these 17 new systems, only four stars, where KOI-54 is the best example, were known to have evidence of these dynamic tides and tidally induced oscillations. We perform preliminary fits to the light curves and radial velocity data, present the overall properties of this class, and discuss the work required to accurately model these systems.

Thompson, Susan E.; Barclay, Thomas; Howell, Steve B.; Still, Martin; Ibrahim, Khadeejah A. [NASA Ames Research Center, Moffett Field, CA 94035 (United States); Everett, Mark [National Optical Astronomy Observatory, Tucson, AZ 85719 (United States); Mullally, Fergal; Rowe, Jason; Christiansen, Jessie L.; Twicken, Joseph D.; Clarke, Bruce D. [SETI Institute, 189 Bernardo Avenue, Suite 100, Mountain View, CA 94043 (United States); Kurtz, Donald W.; Hambleton, Kelly, E-mail: susan.e.thompson@nasa.gov [Jeremiah Horrocks Institute, University of Central Lancashire, Preston PR1 2HE (United Kingdom)

2012-07-01T23:59:59.000Z

284

Modeling the dynamics of tidally-interacting binary neutron stars up to merger  

E-Print Network [OSTI]

We propose an effective-one-body (EOB) model that describes the general relativistic dynamics of neutron star binaries from the early inspiral up to merger. Our EOB model incorporates an enhanced attractive tidal potential motivated by recent analytical advances in the post-Newtonian and gravitational self-force description of relativistic tidal interactions. No fitting parameters are introduced for the description of tidal interaction in the late, strong-field dynamics. We compare the model dynamics (described by the gauge invariant relation between binding energy and orbital angular momentum), and the gravitational wave phasing, with new high-resolution multi-orbit numerical relativity simulations of equal-mass configurations with different equations of state. We find agreement essentially within the uncertainty of the numerical data for all the configurations. Our model is the first semi-analytical model which captures the tidal amplification effects close to merger. It thereby provides the most accurate analytical representation of binary neutron star dynamics and waveforms currently available.

Sebastiano Bernuzzi; Alessandro Nagar; Tim Dietrich; Thibault Damour

2014-12-15T23:59:59.000Z

285

Dissolved oxygen stratification in two micro-tidal partially-mixed estuaries  

E-Print Network [OSTI]

Dissolved oxygen stratification in two micro-tidal partially-mixed estuaries Jing Lin a,*, Lian Xie online 21 August 2006 Abstract The controlling physical factors for vertical oxygen stratification that vertical stratification of dissolved oxygen (DO) concentration can be explained by the extended Hansen

Mallin, Michael

286

Modeling the dynamics of tidally-interacting binary neutron stars up to merger  

E-Print Network [OSTI]

The data analysis of the gravitational wave signals emitted by coalescing neutron star binaries requires the availability of an accurate analytical representation of the dynamics and waveforms of these systems. We propose an effective-one-body (EOB) model that describes the general relativistic dynamics of neutron star binaries from the early inspiral up to merger. Our EOB model incorporates an enhanced attractive tidal potential motivated by recent analytical advances in the post-Newtonian and gravitational self-force description of relativistic tidal interactions. No fitting parameters are introduced for the description of tidal interaction in the late, strong-field dynamics. We compare the model energetics and the gravitational wave phasing with new high-resolution multi-orbit numerical relativity simulations of equal-mass configurations with different equations of state. We find agreement within the uncertainty of the numerical data for all configurations. Our model is the first semi-analytical model which captures the tidal amplification effects close to merger. It thereby provides the most accurate analytical representation of binary neutron star dynamics and waveforms currently available.

Sebastiano Bernuzzi; Alessandro Nagar; Tim Dietrich; Thibault Damour

2015-02-18T23:59:59.000Z

287

Asymmetry of Tidal Plume Fronts in an Eastern Boundary Current Regime  

E-Print Network [OSTI]

water mass. This vorticity controls the transition of the tidal plume 2 #12;front to a subcritical state bulge, which in turn is embedded in far-field plume and coastal waters. Because of the mixing caused on its upwind or northern side) and marks a transition from supercritical to subcritical flow for 6

Jay, David

288

Asymmetry of Columbia River tidal plume fronts David A. Jay a,  

E-Print Network [OSTI]

or northern side and mark a transition from supercritical to subcritical flow for up to 12 h after high water plume water mass. This vorticitycontrols the transition of the tidal plume front to a subcritical state plume may overlie newly upwelled waters, these fronts can mix nutrients into the plume. Symmetry would

Hickey, Barbara

289

Hydrodynamic Modeling, Optimization and Performance Assessment for Ducted and Non-ducted Tidal Turbines  

E-Print Network [OSTI]

Turbines by Michael Robert Shives B.Eng., Carleton University, 2008 A Thesis Submitted in Partial Hydrodynamic Modeling, Optimization and Performance Assessment for Ducted and Non-ducted Tidal Turbines examines methods for designing and analyzing kinetic turbines based on blade element momentum (BEM) theory

Victoria, University of

290

Hydrodynamic Modeling, Optimization and Performance Assessment for Ducted and Non-ducted Tidal Turbines  

E-Print Network [OSTI]

Turbines by Michael Robert Shives B.Eng., Carleton University, 2008 A Dissertation Submitted in Partial Hydrodynamic Modeling, Optimization and Performance Assessment for Ducted and Non-ducted Tidal Turbines) #12;iii ABSTRACT This thesis examines methods for designing and analyzing kinetic turbines based

Pedersen, Tom

291

An analytical solution of groundwater response to tidal fluctuation in a leaky confined aquifer  

E-Print Network [OSTI]

of China. 1. Introduction In most coastal areas, groundwater and seawater are in con- stant communicationAn analytical solution of groundwater response to tidal fluctuation in a leaky confined aquifer Jiu of the solution presented in this paper. This solution is based on a conceptual model under the assumption

Jiao, Jiu Jimmy

292

Tidal mixing around the Maritime continent: implications for1 paleoclimate simulations2  

E-Print Network [OSTI]

of mechanical energy for the ocean circulation and as such is 6 being incorporated changes in the ocean thermal structure, including 12 a ~1o C warming into state-of-the-art climate models. Calculation of the tidal energy flux depends on 7

293

Marine Tidal Current Electric Power Generation Technology: State of the Art and Current Status  

E-Print Network [OSTI]

resurgence in development of renewable ocean energy technology. Therefore, several demonstration projects appreciated as a vast renewable energy source. The energy is stored in oceans partly as thermal energy, partly categories: wave energy, marine and tidal current energy, ocean thermal energy, energy from salinity

Paris-Sud XI, Université de

294

Assessing Soil and Hydrologic Properties for the Successful Creation of Non-Tidal Wetlands  

E-Print Network [OSTI]

1 Assessing Soil and Hydrologic Properties for the Successful Creation of Non-Tidal Wetlands W. Lee, VA 23529-0276 rwhittec@odu.edu Introduction Federal and state wetlands protection regulations require the mitigation of impacts to jurisdictional wetlands via avoidance and minimization of damage whenever possible

Darby, Dennis

295

Refinement and validation of a multi-level assessment method for Mid-Atlantic tidal wetlands  

E-Print Network [OSTI]

Refinement and validation of a multi-level assessment method for Mid-Atlantic tidal wetlands (EPA of wetland resources across the Mid-Atlantic physiographic region, efforts are currently underway in a number of states, most notably Delaware, Maryland, Pennsylvania and Virginia, to develop and implement wetland

296

Inventory and Ventilation Efficiency of Nonnative and Native Phragmites australis (Common Reed) in Tidal  

E-Print Network [OSTI]

NOTE Inventory and Ventilation Efficiency of Nonnative and Native Phragmites australis (Common Reed: 3 July 2012 # Coastal and Estuarine Research Federation 2012 Abstract Nonnative Phragmites is among the most in- vasive plants in the U.S. Atlantic coast tidal wetlands, whereas the native Phragmites has

297

End User Impacts of Automated Electrochromic Windows in a Pilot  

E-Print Network [OSTI]

LBNL-6027E End User Impacts of Automated Electrochromic Windows in a Pilot Retrofit Application E Electrochromic Windows in a Pilot Retrofit Application Eleanor S. Lee1 Abstract , Erin S. Claybaugh Building Independence Avenue, S.W., Washington, DC 20585 USA Automated electrochromic (EC) windows, advanced thermally

298

Safety Warnings Quad Rotors (Quad-Pilot 2 F.3)  

E-Print Network [OSTI]

Safety Warnings Quad Rotors (Quad-Pilot 2 F.3) The quad rotor "quad-pilot 2 F.3" is a complicated accidents from taking place. Operation of the quad rotor should be performed in a safe and responsible not accept any liability for damage and consequent damage arising from the use of the quad rotors, as we have

Langendoen, Koen

299

Perspectives in Practice A Garden Pilot Project Enhances Fruit and  

E-Print Network [OSTI]

RESEARCH Perspectives in Practice A Garden Pilot Project Enhances Fruit and Vegetable Consumption among Children STEPHANIE HEIM, MPH, RD; JAMIE STANG, PhD, MPH, RD; MARJORIE IRELAND, PhD ABSTRACT Fruit a strategy for increasing fruit and vegetable intake in chil- dren. A 12-week pilot intervention was designed

Maxwell, Bruce D.

300

Pilot Plant Study of Carbon Dioxide Capture by Aqueous Monoethanolamine  

E-Print Network [OSTI]

i Pilot Plant Study of Carbon Dioxide Capture by Aqueous Monoethanolamine Topical Report Prepared Pilot Plant Study of Carbon Dioxide Capture by Aqueous Monoethanolamine Ross Edward Dugas, M capture using monoethanolamine (MEA). MEA is an appropriate choice for a baseline study since

Rochelle, Gary T.

Note: This page contains sample records for the topic "inlet pilot tidal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Multi-Agent Autonomous Pilot for Motorcycles Dana Vrajitoru  

E-Print Network [OSTI]

Multi-Agent Autonomous Pilot for Motorcycles Dana Vrajitoru Intelligent Systems Laboratory Indiana with an automatic pilot. The application is written in OpenGL and includes a model of a vehicle (a motorcycle) based (Mourant & Marangos 2003). Our approach targets motorcycles which have not yet been studied as extensively

Vrajitoru, Dana

302

National Grid Deep Energy Retrofit Pilot  

SciTech Connect (OSTI)

Through discussion of five case studies (test homes), this project evaluates strategies to elevate the performance of existing homes to a level commensurate with best-in-class implementation of high-performance new construction homes. The test homes featured in this research activity participated in Deep Energy Retrofit (DER) Pilot Program sponsored by the electric and gas utility National Grid in Massachusetts and Rhode Island. Building enclosure retrofit strategies are evaluated for impact on durability and indoor air quality in addition to energy performance. Evaluation of strategies is structured around the critical control functions of water, airflow, vapor flow, and thermal control. The aim of the research project is to develop guidance that could serve as a foundation for wider adoption of high performance, 'deep' retrofit work. The project will identify risk factors endemic to advanced retrofit in the context of the general building type, configuration and vintage encountered in the National Grid DER Pilot. Results for the test homes are based on observation and performance testing of recently completed projects. Additional observation would be needed to fully gauge long-term energy performance, durability, and occupant comfort.

Neuhauser, K.

2012-03-01T23:59:59.000Z

303

Waste Isolation Pilot Plant, Land Management Plan  

SciTech Connect (OSTI)

To reflect the requirement of section 4 of the Wastes Isolation Pilot Plant Land Withdrawal Act (the Act) (Public Law 102-579), this land management plan has been written for the withdrawal area consistent with the Federal Land Policy and Management Act of 1976. The objective of this document, per the Act, is to describe the plan for the use of the withdrawn land until the end of the decommissioning phase. The plan identifies resource values within the withdrawal area and promotes the concept of multiple-use management. The plan also provides opportunity for participation in the land use planning process by the public and local, State, and Federal agencies. Chapter 1, Introduction, provides the reader with the purpose of this land management plan as well as an overview of the Waste Isolation Pilot Plant. Chapter 2, Affected Environment, is a brief description of the existing resources within the withdrawal area. Chapter 3, Management Objectives and Planned Actions, describes the land management objectives and actions taken to accomplish these objectives.

Not Available

1993-12-01T23:59:59.000Z

304

Long Island Smart Metering Pilot Project  

SciTech Connect (OSTI)

The Long Island Power Authority (LIPA) Smart Meter Pilots provided invaluable information and experience for future deployments of Advanced Metering Infrastructure (AMI), including the deployment planned as part of LIPAâ??s Smart Grid Demonstration Project (DE-OE0000220). LIPA will incorporate lessons learned from this pilot in future deployments, including lessons relating to equipment performance specifications and testing, as well as equipment deployment and tracking issues. LIPA ultimately deployed three AMI technologies instead of the two that were originally contemplated. This enabled LIPA to evaluate multiple systems in field conditions with a relatively small number of meter installations. LIPA experienced a number of equipment and software issues that it did not anticipate, including issues relating to equipment integration, ability to upgrade firmware and software â??over the airâ?ť (as opposed to physically interacting with every meter), and logistical challenges associated with tracking inventory and upgrade status of deployed meters. In addition to evaluating the technology, LIPA also piloted new Time-of-Use (TOU) rates to assess customer acceptance of time-differentiated pricing and to evaluate whether customers would respond by adjusting their activities from peak to non-peak periods. LIPA developed a marketing program to educate customers who received AMI in the pilot areas and to seek voluntary participation in TOU pricing. LIPA also guaranteed participating customers that, for their initial year on the rates, their electricity costs under the TOU rate would not exceed the amount they would have paid under the flat rates they would otherwise enjoy. 62 residential customers chose to participate in the TOU rates, and every one of them saved money during the first year. 61 of them also elected to stay on the TOU rate â?? without the cost guarantee â?? at the end of that year. The customer who chose not to continue on the rate was also the one who achieved the greatest savings. However, after the first year, the customer in question installed equipment that would have made TOU rates a more costly option than the residential flat rate. During the second year, all but one customer saved money. That customer increased usage during peak hours, and as a result saw an increase in annual costs (as compared to the flat rate) of $24.17. The results were less clear for commercial customers, which LIPA attributes to rate design issues that it will take into account for future deployments. LIPA views this pilot as a complete success. Not only is LIPA better prepared for a larger deployment of AMI, but it is confident that residential customers will accept AMI and TOU rates and shift their energy consumption from peak to non-peak periods in response to pricing. On a larger scale, this will benefit LIPA and all of its customers by potentially lowering peak demand when energy costs are highest.

None

2012-03-30T23:59:59.000Z

305

Establishment of a research facility for investigating the effects of unsteady inlet flow, pressure gradient and curvature on boundary layer development, wake development and heat transfer  

E-Print Network [OSTI]

2. LITERATURE REVIEW 3. OBJECTIVES TABLE OF CONTENTS Page nl tv v111 xt 4. THE EXPERIMENTAL TEST FACILITY 4. 1. Overall Layout of the Test Facility 4, 2. The Fan and Inlet Duct Assembly 4. 3. The Diffuser, Settling Chamber and Nozzle... Assembly . 4. 4. The Wake Generator to Simulate Unsteady Inlet Flow . 4, 5. The Test Section to Simulate Blade Curvature 4, 6, The Convex Wall and Traversing System 4. 7, Adjustment of the Turbulence Level 4. 8. Capabilities of the Test Facility, 5...

Pardivala, Darayus Noshir

2012-06-07T23:59:59.000Z

306

Pool spacing, channel morphology, and the restoration of tidal forested wetlands of the Columbia River, U.S.A.  

SciTech Connect (OSTI)

Tidal forested wetlands have sustained substantial areal losses, and restoration practitioners lack a description of many ecosystem structures associated with these late-successional systems in which surface water is a significant controlling factor on the flora and fauna. The roles of large woody debris in terrestrial and riverine ecosystems have been well described compared to functions in tidal areas. This study documents the role of large wood in forcing channel morphology in Picea-sitchensis (Sitka spruce) dominated freshwater tidal wetlands in the floodplain of the Columbia River, U.S.A. near the Pacific coast. The average pool spacing documented in channel surveys of three freshwater tidal forested wetlands near Grays Bay were 2.2 ± 1.3, 2.3 ± 1.2, and 2.5 ± 1.5. There were significantly greater numbers of pools on tidal forested wetland channels than on a nearby restoration site. On the basis of pool spacing and the observed sequences of log jams and pools, the tidal forested wetland channels were classified consistent with a forced step-pool class. Tidal systems, with bidirectional flow, have not previously been classified in this way. The classification provides a useful basis for restoration project design and planning in historically forested tidal freshwater areas, particularly in regard to the use of large wood in restoration actions and the development of pool habitats for aquatic species. Significant modifications by beaver on these sites warrant further investigation to explore the interactions between these animals and restoration actions affecting hydraulics and channel structure in tidal areas.

Diefenderfer, Heida L.; Montgomery, David R.

2008-10-09T23:59:59.000Z

307

Effects of fuel octane number and inlet air temperature on knock characteristics of a single cylinder engine  

SciTech Connect (OSTI)

A dual sample rate technique has been developed and applied to measuring in-cylinder pressure and its oscillations due to autoignition. The harmonics of in-cylinder oscillations were found in good agreement with those obtained from the solutions of wave equation in a cylindrical container. The time of knock relative to spark timing was almost independent of the knock intensity, fuel octane number, and inlet air temperature. The knock intensity was almost constant up to the spark advance when about 100% of the cycles were knocking, further spark advance resulted in higher knock intensity. The mass fraction of unburned fuel at the time of knock was about 10% and was independent of the frequency of the cycles knocking. These observations indicated that the phenomenon of knock is a single-site autoignition for intermittent knock and multi-site autoignition for severe knocking.

Haghgooie, M.

1990-01-01T23:59:59.000Z

308

Draft environmental assessment: Ocean Thermal Energy Conversion (OTEC) Pilot Plants  

SciTech Connect (OSTI)

This Environmental Assessment (EA) has been prepared, in accordance with the National Environmental Policy Act of 1969, for the deployment and operation of a commercial 40-Megawatt (MW) Ocean Thermal Energy Conversion (OTEC) Pilot Plant (hereafter called the Pilot Plant). A description of the proposed action is presented, and a generic environment typical of the candidate Pilot Plant siting regions is described. An assessment of the potential environmental impacts associated with the proposed action is given, and the risk of credible accidents and mitigating measures to reduce these risks are considered. The Federal and State plans and policies the proposed action will encompass are described. Alternatives to the proposed action are presented. Appendix A presents the navigation and environmental information contained in the US Coast Pilot for each of the candidate sites; Appendix B provides a brief description of the methods and calculations used in the EA. It is concluded that environmental disturbances associated with Pilot Plant activities could potentially cause significant environmental impacts; however, the magnitude of these potential impacts cannot presently be assessed, due to insufficient engineering and environmental information. A site- and design-specific OTEC Pilot Plant Environmental Impact Statement (EIS) is required to resolve the potentially significant environmental effects associated with Pilot Plant deployment and operation. (WHK)

Sullivan, S.M.; Sands, M.D.; Donat, J.R.; Jepsen, P.; Smookler, M.; Villa, J.F.

1981-02-01T23:59:59.000Z

309

Use Matlab Code to Link and Pilot Softwares Used for MEMS Simulation.  

E-Print Network [OSTI]

Use Matlab Code to Link and Pilot Softwares Used for MEMS Simulation. H. ACHKAR1 , D. PEYROU1 , F. Then, an explication is done on how we piloted ABAQUS using a Matlab routine. In a third and very on piloting software using Matlab, especially Abaqus (COMSOL is already piloted by Matlab and we are trying

Paris-Sud XI, Université de

310

Independent Oversight Inspection, Waste Isolation Pilot Plant, Summary Report- August 2002  

Broader source: Energy.gov [DOE]

Inspection of Environment, Safety, and Health and Emergency Management at the Waste Isolation Pilot Plant

311

Location Independent Professional Project: A Pilot Study  

SciTech Connect (OSTI)

This pilot study project explored the problem of providing access to the nomadic worker who desires to connect a computer through network access points at a number of different locations within the SNL/NM campus as well as outside the campus. The design and prototype development gathered knowledge that may allow a design to be developed that could be extended to a larger number of SNL/NM network drop boxes. The focus was to provide a capability for a worker to access the SNL IRN from a network drop box (e.g. in a conference room) as easily as when accessing the computer network from the office normally used by the worker. Additional study was done on new methods to authenticate the off campus worker, and protect and control access to data.

Hudson, J.A.; Long, J.P.; Miller, M.M.

1999-02-01T23:59:59.000Z

312

EIS-0207: Newberry Geothermal Pilot Project  

Broader source: Energy.gov [DOE]

The U.S. Forest Service prepared this statement to analyze three alternatives and associated environmental impacts for it to enable the CEE Exploration Company of Portland, Oregon to build and operate a geothermal pilot project and supporting facilities capable of generating 33 megawatts of electric power in the Deschutes National Forest in central Oregon. The Department of Energy’s Bonneville Power Administration (BPA) served as a cooperating agency in preparing this statement in order to fulfill its National Environmental Policy Act obligations ahead of its statutory obligations to purchase and transmit power to customers in the Pacific Northwest, if it is decided that the project will proceed. BPA adopted this statement by October 1994.

313

Waste Isolation Pilot Plant Safety Analysis Report  

SciTech Connect (OSTI)

The following provides a summary of the specific issues addressed in this FY-95 Annual Update as they relate to the CH TRU safety bases: Executive Summary; Site Characteristics; Principal Design and Safety Criteria; Facility Design and Operation; Hazards and Accident Analysis; Derivation of Technical Safety Requirements; Radiological and Hazardous Material Protection; Institutional Programs; Quality Assurance; and Decontamination and Decommissioning. The System Design Descriptions`` (SDDS) for the WIPP were reviewed and incorporated into Chapter 3, Principal Design and Safety Criteria and Chapter 4, Facility Design and Operation. This provides the most currently available final engineering design information on waste emplacement operations throughout the disposal phase up to the point of permanent closure. Also, the criteria which define the TRU waste to be accepted for disposal at the WIPP facility were summarized in Chapter 3 based on the WAC for the Waste Isolation Pilot Plant.`` This Safety Analysis Report (SAR) documents the safety analyses that develop and evaluate the adequacy of the Waste Isolation Pilot Plant Contact-Handled Transuranic Wastes (WIPP CH TRU) safety bases necessary to ensure the safety of workers, the public and the environment from the hazards posed by WIPP waste handling and emplacement operations during the disposal phase and hazards associated with the decommissioning and decontamination phase. The analyses of the hazards associated with the long-term (10,000 year) disposal of TRU and TRU mixed waste, and demonstration of compliance with the requirements of 40 CFR 191, Subpart B and 40 CFR 268.6 will be addressed in detail in the WIPP Final Certification Application scheduled for submittal in October 1996 (40 CFR 191) and the No-Migration Variance Petition (40 CFR 268.6) scheduled for submittal in June 1996. Section 5.4, Long-Term Waste Isolation Assessment summarizes the current status of the assessment.

NONE

1995-11-01T23:59:59.000Z

314

Three-dimensional Numerical Analysis on Blade Response of Vertical Axis Tidal Current Turbine Under Operational Condition  

SciTech Connect (OSTI)

Tidal power as a large-scale renewable source of energy has been receiving significant attention recently because of its advantages over the wind and other renewal energy sources. The technology used to harvest energy from tidal current is called a tidal current turbine. Though some of the principles of wind turbine design are applicable to tidal current turbines, the design of latter ones need additional considerations like cavitation damage, corrosion etc. for the long-term reliability of such turbines. Depending up on the orientation of axis, tidal current turbines can be classified as vertical axis turbines or horizontal axis turbines. Existing studies on the vertical axis tidal current turbine focus more on the hydrodynamic aspects of the turbine rather than the structural aspects. This paper summarizes our recent efforts to study the integrated hydrodynamic and structural aspects of the vertical axis tidal current turbines. After reviewing existing methods in modeling tidal current turbines, we developed a hybrid approach that combines discrete vortex method -finite element method that can simulate the integrated hydrodynamic and structural response of a vertical axis turbine. This hybrid method was initially employed to analyze a typical three-blade vertical axis turbine. The power coefficient was used to evaluate the hydrodynamic performance, and critical deflection was considered to evaluate the structural reliability. A sensitivity analysis was also conducted with various turbine height-to-radius ratios. The results indicate that both the power output and failure probability increase with the turbine height, suggesting a necessity for optimal design. An attempt to optimize a 3-blade vertical axis turbine design with hybrid method yielded a ratio of turbine height to radius (H/R) about 3.0 for reliable maximum power output.

Li, Ye; Karri, Naveen K.; Wang, Qi

2014-04-30T23:59:59.000Z

315

EVOLUTION OF PLANETARY ORBITS WITH STELLAR MASS LOSS AND TIDAL DISSIPATION  

SciTech Connect (OSTI)

Intermediate mass stars and stellar remnants often host planets, and these dynamical systems evolve because of mass loss and tides. This paper considers the combined action of stellar mass loss and tidal dissipation on planetary orbits in order to determine the conditions required for planetary survival. Stellar mass loss is included using a so-called Jeans model, described by a dimensionless mass loss rate ? and an index ?. We use an analogous prescription to model tidal effects, described here by a dimensionless dissipation rate ? and two indices (q, p). The initial conditions are determined by the starting value of angular momentum parameter ?{sub 0} (equivalently, the initial eccentricity) and the phase ? of the orbit. Within the context of this model, we derive an analytic formula for the critical dissipation rate ?, which marks the boundary between orbits that spiral outward due to stellar mass loss and those that spiral inward due to tidal dissipation. This analytic result ? = ?(?, ?, q, p, ?{sub 0}, ?) is essentially exact for initially circular orbits and holds to within an accuracy of ?50% over the entire multi-dimensional parameter space, where the individual parameters vary by several orders of magnitude. For stars that experience mass loss, the stellar radius often displays quasi-periodic variations, which produce corresponding variations in tidal forcing; we generalize the calculation to include such pulsations using a semi-analytic treatment that holds to the same accuracy as the non-pulsating case. These results can be used in many applications, e.g., to predict/constrain properties of planetary systems orbiting white dwarfs.

Adams, Fred C. [Physics Department, University of Michigan, Ann Arbor, MI 48109 (United States)] [Physics Department, University of Michigan, Ann Arbor, MI 48109 (United States); Bloch, Anthony M. [Math Department, University of Michigan, Ann Arbor, MI 48109 (United States)] [Math Department, University of Michigan, Ann Arbor, MI 48109 (United States)

2013-11-10T23:59:59.000Z

316

Structural Design of a Horizontal-Axis Tidal Current Turbine Composite Blade  

SciTech Connect (OSTI)

This paper describes the structural design of a tidal composite blade. The structural design is preceded by two steps: hydrodynamic design and determination of extreme loads. The hydrodynamic design provides the chord and twist distributions along the blade length that result in optimal performance of the tidal turbine over its lifetime. The extreme loads, i.e. the extreme flap and edgewise loads that the blade would likely encounter over its lifetime, are associated with extreme tidal flow conditions and are obtained using a computational fluid dynamics (CFD) software. Given the blade external shape and the extreme loads, we use a laminate-theory-based structural design to determine the optimal layout of composite laminas such that the ultimate-strength and buckling-resistance criteria are satisfied at all points in the blade. The structural design approach allows for arbitrary specification of the chord, twist, and airfoil geometry along the blade and an arbitrary number of shear webs. In addition, certain fabrication criteria are imposed, for example, each composite laminate must be an integral multiple of its constituent ply thickness. In the present effort, the structural design uses only static extreme loads; dynamic-loads-based fatigue design will be addressed in the future. Following the blade design, we compute the distributed structural properties, i.e. flap stiffness, edgewise stiffness, torsion stiffness, mass, moments of inertia, elastic-axis offset, and center-of-mass offset along the blade. Such properties are required by hydro-elastic codes to model the tidal current turbine and to perform modal, stability, loads, and response analyses.

Bir, G. S.; Lawson, M. J.; Li, Y.

2011-10-01T23:59:59.000Z

317

Tidal salt marshes of the southeast Atlantic Coast: A community profile  

SciTech Connect (OSTI)

This report is part of a series of community profiles on the ecology of wetland and marine communities. This particular profile considers tidal marshes of the southeastern Atlantic coast, from North Carolina south to northern Florida. Alone among the earth's ecosystems, coastal communities are subjected to a bidirectional flooding sometimes occurring twice each day; this flooding affects successional development, species composition, stability, and productivity. In the tidally influenced salt marsh, salinity ranges from less than 1 ppt to that of seawater. Dominant plant species include cordgrasses (Spartina alterniflora and S. cynosuroides), black needlerush (Juncus romerianus), and salt marsh bulrush (Scirpus robustus). Both terrestrail and aquatic animals occur in salt marshes and include herons, egrets ospreys (Pandion haliaetus), bald eagles (Haliaeetus leucocephalus), alligators (Alligator Mississippiensis), manatees (Trichecus manatus), oysters, mussels, and fiddler crabs. Currently, the only significant direct commercial use of the tidal salt marshes is by crabbers seeking the blue crab Callinectes sapidus, but the marshes are quite important recreationally, aesthetically, and educationally. 151 refs., 45 figs., 6 tabs.

Wiegert, R.G.; Freeman, B.J.

1990-09-01T23:59:59.000Z

318

Formation of Hot Planets by a combination of planet scattering, tidal circularization, and Kozai mechanism  

E-Print Network [OSTI]

We have investigated the formation of close-in extrasolar giant planets through a coupling effect of mutual scattering, Kozai mechanism, and tidal circularization, by orbital integrations. We have carried out orbital integrations of three planets with Jupiter-mass, directly including the effect of tidal circularization. We have found that in about 30% runs close-in planets are formed, which is much higher than suggested by previous studies. We have found that Kozai mechanism by outer planets is responsible for the formation of close-in planets. During the three-planet orbital crossing, the Kozai excitation is repeated and the eccentricity is often increased secularly to values close enough to unity for tidal circularization to transform the inner planet to a close-in planet. Since a moderate eccentricity can remain for the close-in planet, this mechanism may account for the observed close-in planets with moderate eccentricities and without nearby secondary planets. Since these planets also remain a broad range of orbital inclinations (even retrograde ones), the contribution of this process would be clarified by more observations of Rossiter-McLaughlin effects for transiting planets.

M. Nagasawa; S. Ida; T. Bessho

2008-01-09T23:59:59.000Z

319

Americium/Curium Vitrification Pilot Tests - Part II  

SciTech Connect (OSTI)

Isotopes of americium (Am) and curium (Cm) were produced in the past at the Savannah River Site (SRS) for research, medical, and radiological applications. These highly radioactive and valuable isotopes have been stored in an SRS reprocessing facility for a number of years. Vitrification of this solution will allow the material to be more safely stored until it is transported to the DOE Oak Ridge Reservation for use in research and medical applications. A previous paper described operation results from the Am-Cm Melter 2A pilot system, a full-scale non-radioactive pilot facility. This paper presents the results from continued testing in the Pilot Facility and also describes efforts taken to look at alternative vitrification process operations and flowsheets designed to address the problems observed during melter 2A pilot testing.

Marra, J.E. [Westinghouse Savannah River Company, AIKEN, SC (United States); Baich, M.A.; Fellinger, A.P.; Hardy, B.J.; Herman, D.T.; Jones, T.M.; Miller, C.B.; Miller, D.H.; Snyder, T. K.; Stone, M.E.

1998-05-01T23:59:59.000Z

320

EAST TEXAS FOREST INVENTORY (ETFI) PILOT PROJECT REMOTE SENSING PHASE  

E-Print Network [OSTI]

EAST TEXAS FOREST INVENTORY (ETFI) PILOT PROJECT REMOTE SENSING PHASE Dr. Daniel R. Unger, Remote) or the United States Forest Service (USFS) via the Southern Forest Inventory and Analysis Program (SFIA

Hung, I-Kuai

Note: This page contains sample records for the topic "inlet pilot tidal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Cathy Zoi on the new Home Energy Score pilot program  

Broader source: Energy.gov [DOE]

The new Home Energy Score pilot program provides consumers with a home energy score between 1 and 10, and shows them how their home compares to others in their region. The program also offers...

322

ENVIRONMENTAL ASSESSMENT OCEAN THERMAL ENERGY CONVERSION (OTEC) PILOT PLANTS  

E-Print Network [OSTI]

the external fluid mechanics of OTEC plants: report coveringocean thermal energy conversion (OTEC) plants by mid-1980's.1980. A baseline design of a 40-MW OTEC Pilot Johns Hopkins

Sullivan, S.M.

2014-01-01T23:59:59.000Z

323

Interagency Pilot of Greenhouse Gas Accounting Tools: Lessons Learned  

SciTech Connect (OSTI)

The Greater Yellowstone Area (GYA) and Tongass National Forest (Tongass) partnered with the National Renewable Energy Laboratory (NREL) to conduct a pilot study of three greenhouse gas (GHG) inventorying tools.

Carpenter, A.; Hotchkiss, E.; Kandt, A.

2013-02-01T23:59:59.000Z

324

Situation Awareness Information Requirements For Commercial Airline Pilots  

E-Print Network [OSTI]

Situation awareness is presented as a fundamental requirement for good airmanship, forming the basis for pilot decision making and performance. To develop a better understanding of the role of situation awareness in flying, ...

Endsley, Mica R.

325

In situ combustion - from pilot to commercial application  

SciTech Connect (OSTI)

In 1994, there are at least 14 active commercial in-situ combustion (ISC) projects worldwide. A review of these projects is carried out in order to emphasize the important factors which contributed to the success of the processes. The success of the developing an ISC pilot into a commercial ISC project is strongly connected with two factors: (a) starting the operation from the uppermost part of the structure and extending the process downwards and (b) application of the line drive well configuration instead of patterns, whenever is possible. An effective, peripheral line drive operation requires pool utilization. The most challenging phase towards commercialization of an ISC project is the field pilot design, implementation and evaluation. This paper is focused on the advantages of locating ISC pilot at the upper zone of the reservoir, due to the need for a full scale integration of the pilot with the subsequent semi- and commercial development of the process.

Turta, A. [Petroleum Recovery Institute, Alberta (Canada)

1995-02-01T23:59:59.000Z

326

Summary of the 2006 Automated Demand Response Pilot  

E-Print Network [OSTI]

This paper discusses the specific concept for, design of, and results from a pilot program to automate demand response with critical peak pricing. California utilities have been exploring the use of critical peak pricing (CPP) to help reduce peak...

Piette, M.; Kiliccote, S.

2007-01-01T23:59:59.000Z

327

Community Based Renewable Energy Production Incentive (Pilot Program)  

Broader source: Energy.gov [DOE]

In June 2009, Maine established the Community-based Renewable Energy Pilot Program. As the name suggests, this program is intended to encourage the development of locally owned, in-state renewable...

328

Discovery of a Low-Mass Companion to a Metal-Rich F Star with the MARVELS Pilot Project  

E-Print Network [OSTI]

We report the discovery of a low-mass companion orbiting the metal-rich, main sequence F star TYC 2949-00557-1 during the MARVELS (Multi-object APO Radial Velocity Exoplanet Large-area Survey) Pilot Project. The host star has an effective temperature T_eff = 6135 +/- 40 K, log(g) = 4.4 +/- 0.1 and [Fe/H] = 0.32 +/- 0.01, indicating a mass of M = 1.25 +/- 0.09 M_\\odot and R = 1.15 +/- 0.15 R_\\odot. The companion has an orbital period of 5.69449 +/- 0.00023 days and straddles the hydrogen burning limit with a minimum mass of 64 M_J, and may thus be an example of the rare class of brown dwarfs orbiting at distances comparable to those of "Hot Jupiters." We present relative photometry that demonstrates the host star is photometrically stable at the few millimagnitude level on time scales of hours to years, and rules out transits for a companion of radius greater than 0.8 R_J at the 95% confidence level. Tidal analysis of the system suggests that the star and companion are likely in a double synchronous state wher...

Fleming, Scott W; Mahadevan, Suvrath; Lee, Brian; Eastman, Jason D; Siverd, Robert J; Gaudi, B Scott; Niedzielski, Andrzej; Sivarani, Thirupathi; Stassun, Keivan; Wolszczan, Alex; Barnes, Rory; Gary, Bruce; Nguyen, Duy Cuong; Morehead, Robert C; Wan, Xiaoke; Zhao, Bo; Liu, Jian; Guo, Pengcheng; Kane, Stephen R; van Eyken, Julian C; De Lee, Nathan M; Crepp, Justin R; Shelden, Alaina C; Laws, Chris; Wisniewski, John P; Schneider, Donald P; Pepper, Joshua; Snedden, Stephanie A; Pan, Kaike; Bizyaev, Dmitry; Brewington, Howard; Malanushenko, Olena; Malanushenko, Viktor; Oravetz, Daniel; Simmons, Audrey; Watters, Shannon

2010-01-01T23:59:59.000Z

329

The H-Coal pilot plant and the Breckinridge Project  

SciTech Connect (OSTI)

A large coal-liquefaction pilot plant is in operation at Catlettsburg, Kentucky, expanding on the H-Coal technology. The pilot plant operated very successfully during 1981, confirming research yield data on eastern bituminous coal, demonstrating operability of the process, and resulting in a significant accumulation of engineering data. Ashland Synthetic Fuels, Inc., and Bechtel Petroleum, Inc., are developing the Breckinridge Project, a commercial coal-liquefaction plant proposed for Breckinridge County, Kentucky, based on the H-Coal technology.

Wigglesworth, T.H.

1982-05-01T23:59:59.000Z

330

Waste Isolation Pilot Plant Environmental Monitoring Plan  

SciTech Connect (OSTI)

U.S. Department of Energy (DOE) Order 450.1, Environmental Protection Program, requires each DOE site to conduct environmental monitoring. Environmental monitoring at the Waste Isolation Pilot Plant (WIPP) is conducted in order to: (a) Verify and support compliance with applicable federal, state, and local environmental laws, regulations, permits, and orders; (b) Establish baselines and characterize trends in the physical, chemical, and biological condition of effluent and environmental media; (c) Identify potential environmental problems and evaluate the need for remedial actions or measures to mitigate the problems; (d) Detect, characterize, and report unplanned releases; (e) Evaluate the effectiveness of effluent treatment and control, and pollution abatement programs; and (f) Determine compliance with commitments made in environmental impact statements, environmental assessments, safety analysis reports, or other official DOE documents. This Environmental Monitoring Plan (EMP) explains the rationale and design criteria for the environmental monitoring program, extent and frequency of monitoring and measurements, procedures for laboratory analyses, quality assurance (QA) requirements, program implementation procedures, and direction for the preparation and disposition of reports. Changes to the environmental monitoring program may be necessary to allow the use of advanced technology and new data collection techniques. This EMP will document changes in the environmental monitoring program. Guidance for preparation of EMPs is contained in DOE/EH-0173T, Environmental Regulatory Guide for Radiological Effluent Monitoring and Environmental Surveillance.

Washington Regulatory and Environmental Services; Washington TRU Solutions LLC

2008-03-12T23:59:59.000Z

331

The DOE Water Cycle Pilot Study  

SciTech Connect (OSTI)

A Department of Energy (DOE) multi-laboratory Water Cycle Pilot Study (WCPS) investigated components of the local water budget at the Walnut River Watershed in Kansas to study the relative importance of various processes and to determine the feasibility of observational water budget closure. An extensive database of local meteorological time series and land surface characteristics was compiled. Numerical simulations of water budget components were generated and, to the extent possible, validated for three nested domains within the Southern Great Plains; the DOE Atmospheric Radiation Measurement/Cloud Atmospheric Radiation Testbed (ARM/CART), the Walnut River Watershed (WRW), and the Whitewater Watershed (WW), Kansas A 2-month Intensive Observation Period (IOP) was conducted to gather detailed observations relevant to specific details of the water budget, including fine-scale precipitation, streamflow, and soil moisture measurements not made routinely by other programs. Event and season al water isotope (delta 18O, delta D) sampling in rainwater, streams, soils, lakes, and wells provided a means of tracing sources and sinks within and external to the WW, WRW, and the ARM/CART domains. The WCPS measured changes in leaf area index for several vegetation types, deep groundwater variations at two wells, and meteorological variables at a number of sites in the WRW. Additional activities of the WCPS include code development toward a regional climate model with water isotope processes, soil moisture transect measurements, and water level measurements in ground water wells.

Miller, N.L.; King, A.W.; Miller, M.A.; Springer, E.P.; Wesely, M.L.; Bashford, K.E.; Conrad, M.E.; Costigan, K.; Foster, P.N.; Gibbs, H.K.; Jin, J.; Klazura, J.; Lesht, B.M.; Machavaram, M.V.; Pan, F.; Song, J.; Troyan, D.; Washington-Allen, R.A.

2003-09-20T23:59:59.000Z

332

Waste Isolation Pilot Plant borehole data  

SciTech Connect (OSTI)

Data pertaining to all the surface boreholes used at the WIPP site for site characterization hydrological testing and resource evaluation exist in numerous source documents. This project was initiated to develop a comprehensive data base that would include the data on all WIPP related surface boreholes from the Atomic Energy Commission, Waste Isolation Pilot Plant Energy Research and Development Administration, Department of Energy, and Hydrologic Test Borehole Programs. The data compiled from each borehole includes: operator, permit number, location, total depth, type of well, driller, drilling record, casing record, plugging schedule, and stratigraphic summary. There are six groups of boreholes contained in this data base, they are as follows: Commercially Drilled Potash Boreholes, Energy Department Wells, Geologic Exploration Boreholes, Hydrologic Test Boreholes, Potash Boreholes, and Subsurface Exploration Boreholes. There were numerous references which contained borehole data. In some cases the data found in one document was inconsistent with data in another document. In order to ensure consistency and accuracy in the data base, the same references were used for as many of the boreholes as possible. For example, all elevations and locations were taken from Compilation and Comparison of Test-Hole Location Surveys in the Vicinity of the WIPP Site. SAND 88-1065, Table 3-5. There are some sections where a data field is left blank. In this case, the information was either not applicable or was unavailable.

NONE

1995-04-01T23:59:59.000Z

333

International Safeguards Technology and Policy Education and Training Pilot Programs  

SciTech Connect (OSTI)

A major focus of the National Nuclear Security Administration-led Next Generation Safeguards Initiative (NGSI) is the development of human capital to meet present and future challenges to the safeguards regime. An effective university-level education in safeguards and related disciplines is an essential element in a layered strategy to rebuild the safeguards human resource capacity. NNSA launched two pilot programs in 2008 to develop university level courses and internships in association with James, Martin Center for Nonproliferation Studies (CNS) at the Monterey Institute of International Studies (MIIS) and Texas A&M University (TAMU). These pilot efforts involved 44 students in total and were closely linked to hands-on internships at Los Alamos National Laboratory (LANL) and Lawrence Livermore National Laboratory (LLNL). The Safeguards and Nuclear Material Management pilot program was a collaboration between TAMU, LANL, and LLNL. The LANL-based coursework was shared with the students undertaking internships at LLNL via video teleconferencing. A weeklong hands-on exercise was also conducted at LANL. A second pilot effort, the International Nuclear Safeguards Policy and Information Analysis pilot program was implemented at MIIS in cooperation with LLNL. Speakers from MIIS, LLNL, and other U.S. national laboratories (LANL, BNL) delivered lectures for the audience of 16 students. The majority of students were senior classmen or new master's degree graduates from MIIS specializing in nonproliferation policy studies. The two pilots programs concluded with an NGSI Summer Student Symposium, held at LLNL, where 20 students participated in LLNL facility tours and poster sessions. The value of bringing together the students from the technical and policy pilots was notable and will factor into the planning for the continued refinement of the two programs in the coming years.

Dreicer, M; Anzelon, G A; Essner, J T; Dougan, A D; Doyle, J; Boyer, B; Hypes, P; Sokava, E; Wehling, F; Martin, J; Charlton, W

2009-06-16T23:59:59.000Z

334

A study of the effects of inlet preswirl on the dynamic coefficients of a straight-bore honeycomb gas damper seal  

E-Print Network [OSTI]

A STUDY OF THE EFFECTS OF INLET PRESWIRL ON THE DYNAMIC COEFFICIENTS OF A STRAIGHT-BORE HONEYCOMB GAS DAMPER SEAL A Thesis by TONY BRANDON SPROWL Submitted to the Office of Graduate Studies of Texas A&M University...-BORE HONEYCOMB GAS DAMPER SEAL A Thesis by TONY BRANDON SPROWL Submitted to Texas A&M University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE Approved as to style and content by...

Sprowl, Tony Brandon

2005-02-17T23:59:59.000Z

335

Waste Isolation Pilot Plant Environmental Monitoring Plan  

SciTech Connect (OSTI)

U.S. Department of Energy (DOE) Order 450.1, Environmental Protection Program, requires each DOE site to conduct environmental monitoring. Environmental monitoring at the Waste Isolation Pilot Plant (WIPP) is conducted in order to: (a) Verify and support compliance with applicable federal, state, and local environmental laws, regulations, permits, and orders; (b) Establish baselines and characterize trends in the physical, chemical, and biological condition of effluent and environmental media; (c) Identify potential environmental problems and evaluate the need for remedial actions or measures to mitigate the problem; (d) Detect, characterize, and report unplanned releases; (e) Evaluate the effectiveness of effluent treatment and control, and pollution abatement programs; and (f) Determine compliance with commitments made in environmental impact statements, environmental assessments, safety analysis reports, or other official DOE documents. This Environmental Monitoring Plan (EMP) has been written to contain the rationale and design criteria for the monitoring program, extent and frequency of monitoring and measurements, procedures for laboratory analyses, quality assurance (QA) requirements, program implementation procedures, and direction for the preparation and disposition of reports. Changes to the environmental monitoring program may be necessary to allow the use of advanced technology and new data collection techniques. This EMP will document any proposed changes in the environmental monitoring program. Guidance for preparation of Environmental Monitoring Plans is contained in DOE/EH-0173T, Environmental Regulatory Guide for Radiological Effluent Monitoring and Environmental Surveillance. The plan will be effective when it is approved by the appropriate Head of Field Organization or their designee. The plan discusses major environmental monitoring and hydrology activities at the WIPP and describes the programs established to ensure that WIPP operations do not have detrimental effects on the environment. This EMP is to be reviewed annually and updated every three years unless otherwise requested by the DOE or contractor.

Washington Regulatory and Environmental Services; Washington TRU Solutions LLC

2004-02-19T23:59:59.000Z

336

An evaluation of the management system verification pilot at Hanford  

SciTech Connect (OSTI)

The Chemical Management System (CMS), currently under development at Hanford, was used as the ''test program'' for pilot testing the value added aspects of the Chemical Manufacturers Association's (CMA) Management Systems Verification (MSV) process. The MSV process, which was developed by CMA's member chemical companies specifically as a tool to assist in the continuous improvement of environment, safety and health (ESH) performance, represents a commercial sector ''best practice'' for evaluating ESH management systems. The primary purpose of Hanford's MSV Pilot was to evaluate the applicability and utility of the MSV process in the Department of Energy (DOE) environment. However, because the Integrated Safety Management System (ISMS) is the framework for ESH management at Hanford and at all DOE sites, the pilot specifically considered the MSV process in the context of a possible future adjunct to Integrated Safety Management System Verification (ISMSV) efforts at Hanford and elsewhere within the DOE complex. The pilot involved the conduct of two-hour interviews with four separate panels of individuals with functional responsibilities related to the CMS including the Department of Energy Richland Operations (DOE-RL), Fluor Daniel Hanford (FDH) and FDH's major subcontractors (MSCS). A semi-structured interview process was employed by the team of three ''verifiers'' who directed open-ended questions to the panels regarding the development, integration and effectiveness of management systems necessary to ensure the sustainability of the CMS effort. An ''MSV Pilot Effectiveness Survey'' also was completed by each panel participant immediately following the interview.

BRIGGS, C.R.

1998-11-12T23:59:59.000Z

337

TIDAL TAIL EJECTION AS A SIGNATURE OF TYPE Ia SUPERNOVAE FROM WHITE DWARF MERGERS  

SciTech Connect (OSTI)

The merger of two white dwarfs may be preceded by the ejection of some mass in ''tidal tails,'' creating a circumstellar medium around the system. We consider the variety of observational signatures from this material, which depend on the lag time between the start of the merger and the ultimate explosion (assuming one occurs) of the system in a Type Ia supernova (SN Ia). If the time lag is fairly short, then the interaction of the supernova ejecta with the tails could lead to detectable shock emission at radio, optical, and/or X-ray wavelengths. At somewhat later times, the tails produce relatively broad NaID absorption lines with velocity widths of the order of the white dwarf escape speed ({approx}1000 km s{sup -1}). That none of these signatures have been detected in normal SNe Ia constrains the lag time to be either very short ({approx}< 100 s) or fairly long ({approx}> 100 yr). If the tails have expanded and cooled over timescales {approx}10{sup 4} yr, then they could be observable through narrow NaID and Ca II H and K absorption lines in the spectra, which are seen in some fraction of SNe Ia. Using a combination of three-dimensional and one-dimensional hydrodynamical codes, we model the mass loss from tidal interactions in binary systems, and the subsequent interactions with the interstellar medium, which produce a slow-moving, dense shell of gas. We synthesize NaID line profiles by ray casting through this shell, and show that in some circumstances tidal tails could be responsible for narrow absorptions similar to those observed.

Raskin, Cody; Kasen, Daniel [Nuclear Science Division, Lawrence Berkeley National Laboratory, Berkeley, CA (United States)

2013-07-20T23:59:59.000Z

338

Do flares in Sagittarius A* reflect the last stage of tidal capture?  

E-Print Network [OSTI]

In recent years the case for the presence of 3-4 10^6 M_sun black hole in our Galactic Center has gained strength from results of stellar dynamics observations and from the detection of several rapid X-ray and IR flares observed in the Sagittarius A* from 2000 to 2004. Here we explore the idea that such flares are produced when the central black hole tidally captures and disrupts a small body - e.g. a comet or an asteroid.

A. Cadez; M. Calvani; A. Gomboc; U. Kostic

2007-09-03T23:59:59.000Z

339

Analysis of tidal current observations over the northeastern shelf of the Gulf of Mexico  

E-Print Network [OSTI]

ANALYSIS OF TIDAL CURRENT OBSERVATIONS OVER THE NORTHEASTERN SHELF OF THE GULF OF MEXICO A Thesis By DONALD LEE DURHAM Submitted to the Graduate College of the Texas A&M University in partial fulfillment of the requirements for the degree... by Project 286 of the Texas A&M Research Foundation; this project is sponsored by the Office of Naval Research under Contract Nonr 2119(04). The Texas State Fellowship which was granted to me by the Graduate College of Texas A&M University...

Durham, Donald L

1967-01-01T23:59:59.000Z

340

MHK Projects/Cape Cod Tidal Energy Project | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpIncMAK Technologies Jump to:BW2 Tidal <CETO La Reunion

Note: This page contains sample records for the topic "inlet pilot tidal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

MHK Projects/Cape Islands Tidal Energy Project | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpIncMAK Technologies Jump to:BW2 Tidal <CETO La ReunionCape Islands

342

MHK Projects/Edgar Town Nantucket Tidal Energy | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpIncMAK Technologies Jump to:BW2 TidalMar Landing

343

MHK Projects/Fishers Island Tidal Energy Project | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpIncMAK Technologies Jump to:BW2 TidalMarFalmouth < MHKFigueira

344

MHK Projects/Indian River Tidal Hydrokinetic Energy Project | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy Resources Jump to:46 - 429Lacey,(MonasterLowell Point, Alaska:LuzClick here Current /TidalITRI WEC

345

New Pilot Study on Sea Level Rise Offers Approach That Can Help...  

Broader source: Energy.gov (indexed) [DOE]

Pilot Study on Sea Level Rise Offers Approach That Can Help Communities Assess Possible Impact of Sea Level Rise on Energy Assets New Pilot Study on Sea Level Rise Offers Approach...

346

E-Print Network 3.0 - air pollution pilot Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

pilot Search Powered by Explorit Topic List Advanced Search Sample search results for: air pollution pilot Page: << < 1 2 3 4 5 > >> 1 Real-Time Monitoring and Mapping of Air...

347

E-Print Network 3.0 - alcohol pilot study Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

pilot study Search Powered by Explorit Topic List Advanced Search Sample search results for: alcohol pilot study Page: << < 1 2 3 4 5 > >> 1 Influence of Age at Drinking Onset on...

348

Status of the PEATGAS Pilot Plant Development Program  

SciTech Connect (OSTI)

Minnesota peat has been successfully processed in a 2 ton/h, continuous, fully integrated pilot plant since April 1981 at the Institute of Gas Technology (IGT) Energy Development Center in Chicago. The reactor system is based on the PEATGAS process for the production of substitute natural gas (SNG) developed by IGT. Three tests have been conducted in the pilot plant at a 500-psig pressure and gasification temperatures up to 1650/sup 0/F. Peat conversions consistently averaged over 90% at the upper temperature levels. These tests were conducted using a slurry feeding system to inject peat, which contained about 10% moisture, into the gasifier. The facility is currently being modified to accept dry peat feed using a two-stage lockhopper system. When this modification is completed, testing will begin with peat containing 30% to 50% moisture. Results of the successful test series using slurry feed and the progress made on the pilot plant lockhopper modification are summarized.

Biljetina, R.; Punwani, D.V.

1981-01-01T23:59:59.000Z

349

Hydrogen Fuel Pilot Plant and Hydrogen ICE Vehicle Testing  

SciTech Connect (OSTI)

The U.S. Department Energy's Advanced Vehicle Testing Activity (AVTA) teamed with Electric Transportation Applications (ETA) and Arizona Public Service (APS) to develop the APS Alternative Fuel (Hydrogen) Pilot Plant that produces and compresses hydrogen on site through an electrolysis process by operating a PEM fuel cell in reverse; natural gas is also compressed onsite. The Pilot Plant dispenses 100% hydrogen, 15 to 50% blends of hydrogen and compressed natural gas (H/CNG), and 100% CNG via a credit card billing system at pressures up to 5,000 psi. Thirty internal combustion engine (ICE) vehicles (including Daimler Chrysler, Ford and General Motors vehicles) are operating on 100% hydrogen and 15 to 50% H/CNG blends. Since the Pilot Plant started operating in June 2002, they hydrogen and H/CNG ICE vehicels have accumulated 250,000 test miles.

J. Francfort (INEEL)

2005-03-01T23:59:59.000Z

350

Coalbed-methane pilots - timing, design, and analysis  

SciTech Connect (OSTI)

Four distinct sequential phases form a recommended process for coalbed-methane (CBM)-prospect assessment: initial screening reconnaissance, pilot testing, and final appraisal. Stepping through these four phases provides a program of progressively ramping work and cost, while creating a series of discrete decision points at which analysis of results and risks can be assessed. While discussing each of these phases in some degree, this paper focuses on the third, the critically important pilot-testing phase. This paper contains roughly 30 specific recommendations and the fundamental rationale behind each recommendation to help ensure that a CBM pilot will fulfill its primary objectives of (1) demonstrating whether the subject coal reservoir will desorb and produce consequential gas and (2) gathering the data critical to evaluate and risk the prospect at the next-often most critical-decision point.

Roadifer, R.D.; Moore, T.R.

2009-10-15T23:59:59.000Z

351

A Synthesis of Environmental and Plant Community Data for Tidal Wetland Restoration Planning in the Lower Columbia River and Estuary  

SciTech Connect (OSTI)

This report reanalyzes and synthesizes previously existing environmental and plant community data collected by PNNL at 55 tidal wetlands and 3 newly restored sites in the lower Columbia River and estuary (LCRE) between 2005 and 2011. Whereas data were originally collected for various research or monitoring objectives of five studies, the intent of this report is to provide only information that will have direct utility in planning tidal wetland restoration projects. Therefore, for this report, all tidal wetland data on plants and the physical environment, which were originally developed and reported by separate studies, were tabulated and reanalyzed as a whole. The geographic scope of the data collected in this report is from Bonneville Lock and Dam to the mouth of the Columbia River

Diefenderfer, Heida L.; Borde, Amy B.; Cullinan, Valerie I.

2013-12-01T23:59:59.000Z

352

Friction Factor Measurement, Analysis, and Modeling for Flat-Plates with 12.15 mm Diameter Hole-Pattern, Tested with Air at Different Clearances, Inlet Pressures, and Pressure Ratios  

E-Print Network [OSTI]

of 800, 1000, and 1200 psi respectively). These nine combinations of clearance and inlet pressure will give a range of friction factor. The following objectives are considered. 17 Figure 10. Detailed view of a 3.175 mm diameter hole...

Deva Asirvatham, Thanesh

2011-02-22T23:59:59.000Z

353

The Rosetta Resources CO2 Storage Project - A WESTCARB Geologic Pilot Test  

E-Print Network [OSTI]

abandoned gas field located near Rio Vista will be used for the Rosetta pilot tests. STACKED RESERVOIR

2006-01-01T23:59:59.000Z

354

Waste Isolation Pilot Plant: No-migration variance petition. Figures: Volume 8, Revision 1  

SciTech Connect (OSTI)

This report is a compilation of engineering drawings concerned with seal arrangement at the Waste Isolation Pilot Plant (WIPP).

Not Available

1990-03-01T23:59:59.000Z

355

GRB060218 AS A TIDAL DISRUPTION OF A WHITE DWARF BY AN INTERMEDIATE-MASS BLACK HOLE  

SciTech Connect (OSTI)

The highly unusual pair of a gamma-ray burst (GRB) GRB060218 and an associated supernova, SN2006aj, has puzzled theorists for years. A supernova shock breakout and a jet from a newborn stellar mass compact object have been proposed to explain this pair's multiwavelength signature. Alternatively, we propose that the source is naturally explained by another channel: the tidal disruption of a white dwarf (WD) by an intermediate-mass black hole (IMBH). This tidal disruption is accompanied by a tidal pinching, which leads to the ignition of a WD and a supernova. Some debris falls back onto the IMBH, forms a disk, which quickly amplifies the magnetic field, and launches a jet. We successfully fit soft X-ray spectra with the Comptonized blackbody emission from a jet photosphere. The optical/UV emission is consistent with self-absorbed synchrotron emission from the expanding jet front. The temporal dependence of the accretion rate M-dot (t) in a tidal disruption provides a good fit to the soft X-ray light curve. The IMBH mass is found to be about 10{sup 4} M{sub Sun} in three independent estimates: (1) fitting the tidal disruption M-dot (t) to the soft X-ray light curve, (2) computing the jet base radius in a jet photospheric emission model, and (3) inferring the mass of the central black hole based on the host dwarf galaxy's stellar mass. The position of the supernova is consistent with the center of the host galaxy, while the low supernova ejecta mass is consistent with that of a WD. The high expected rate of tidal disruptions in dwarf galaxies is consistent with one source observed by the Swift satellite over several years at a distance of 150 Mpc measured for GRB060218. Encounters with WDs provide much fuel for the growth of IMBHs.

Shcherbakov, Roman V.; Reynolds, Christopher S. [Department of Astronomy, University of Maryland, College Park, MD 20742 (United States); Pe'er, Asaf [Harvard-Smithsonian Center for Astrophysics, 60 Garden Street, Cambridge, MA 02138 (United States); Haas, Roland [Theoretical AstroPhysics Including Relativity, California Institute of Technology, Pasadena, CA 91125 (United States); Bode, Tanja; Laguna, Pablo [Center for Relativistic Astrophysics, School of Physics, Georgia Institute of Technology, Atlanta, GA 30332 (United States)

2013-06-01T23:59:59.000Z

356

Hydraulic Geometry and Microtopography of Tidal Freshwater Forested Wetlands and Implications for Restoration, Columbia River, U.S.A.  

SciTech Connect (OSTI)

The hydrologic reconnection of tidal channels, riverine floodplains, and main stem channels are among responses by ecological restoration practitioners to the increasing fragmentation and land conversion occurring in coastal and riparian zones. Design standards and monitoring of such ecological restoration depend upon the characterization of reference sites that vary within and among regions. Few locales, such as the 235 km tidal portion of the Columbia River on the West Coast U.S.A., remain in which the reference conditions and restoration responses of tidal freshwater forested wetlands on temperate zone large river floodplains can be compared. This study developed hydraulic geometry relationships for Picea sitchensis (Sitka spruce) dominated tidal forests (swamps) in the vicinity of Grays Bay on the Columbia River some 37 km from the Pacific Coast using field surveys and Light Detection and Ranging (LiDAR) data. Scaling relationships between catchment area and the parameters of channel cross-sectional area at outlet and total channel length were comparable to tidally influenced systems of San Francisco Bay and the United Kingdom. Dike breaching, culvert replacement, and tide gate replacement all affected channel cross-sectional geometry through changes in the frequency of over-marsh flows. Radiocarbon dating of buried wood provided evidence of changes in sedimentation rates associated with diking, and restoration trajectories may be confounded by historical subsidence behind dikes rendering topographical relationships with water level incomparable to reference conditions. At the same time, buried wood is influencing the development of channel morphology toward characteristics resembling reference conditions. Ecological restoration goals and practices in tidal forested wetland regions of large river floodplains should reflect the interactions of these controlling factors.

Diefenderfer, Heida L.; Coleman, Andre M.; Borde, Amy B.; Sinks, Ian A.

2008-01-01T23:59:59.000Z

357

Ecology of Juvenile Salmon in Shallow Tidal Freshwater Habitats of the Lower Columbia River, 2007–2010  

SciTech Connect (OSTI)

The TFM study was designed to investigate the ecology and early life history of juvenile salmonids within shallow (<5 m) tidal freshwater habitats of the LCRE. We started collecting field data in June 2007. Since then, monthly sampling has occurred in the vicinity of the Sandy River delta (rkm 192–208) and at other sites and times in lower river reaches of tidal freshwater (rkm 110 to 141). This report provides a comprehensive synthesis of data covering the field period from June 2007 through April 2010.

Johnson, Gary E.; Storch, Adam; Skalski, J. R.; Bryson, Amanda J.; Mallette, Christine; Borde, Amy B.; Van Dyke, E.; Sobocinski, Kathryn L.; Sather, Nichole K.; Teel, David; Dawley, Earl M.; Ploskey, Gene R.; Jones, Tucker A.; Zimmerman, Shon A.; Kuligowski, D. R.

2011-03-01T23:59:59.000Z

358

OBLIQUITIES OF HOT JUPITER HOST STARS: EVIDENCE FOR TIDAL INTERACTIONS AND PRIMORDIAL MISALIGNMENTS  

SciTech Connect (OSTI)

We provide evidence that the obliquities of stars with close-in giant planets were initially nearly random, and that the low obliquities that are often observed are a consequence of star-planet tidal interactions. The evidence is based on 14 new measurements of the Rossiter-McLaughlin effect (for the systems HAT-P-6, HAT-P-7, HAT-P-16, HAT-P-24, HAT-P-32, HAT-P-34, WASP-12, WASP-16, WASP-18, WASP-19, WASP-26, WASP-31, Gl 436, and Kepler-8), as well as a critical review of previous observations. The low-obliquity (well-aligned) systems are those for which the expected tidal timescale is short, and likewise the high-obliquity (misaligned and retrograde) systems are those for which the expected timescale is long. At face value, this finding indicates that the origin of hot Jupiters involves dynamical interactions like planet-planet interactions or the Kozai effect that tilt their orbits rather than inspiraling due to interaction with a protoplanetary disk. We discuss the status of this hypothesis and the observations that are needed for a more definitive conclusion.

Albrecht, Simon; Winn, Joshua N. [Department of Physics, and Kavli Institute for Astrophysics and Space Research, Massachusetts Institute of Technology, Cambridge, MA 02139 (United States); Johnson, John A. [Department of Astrophysics, California Institute of Technology, MC249-17, Pasadena, CA 91125 (United States); Howard, Andrew W.; Marcy, Geoffrey W. [Department of Astronomy, University of California, Berkeley, CA 94720 (United States); Butler, R. Paul [Department of Terrestrial Magnetism, Carnegie Institution of Washington, 5241 Broad Branch Road NW, Washington, DC 20015 (United States); Arriagada, Pamela [Department of Astronomy, Pontificia Universidad Catolica de Chile, Casilla 306, Santiago 22 (Chile); Crane, Jeffrey D.; Shectman, Stephen A.; Thompson, Ian B. [The Observatories of the Carnegie Institution of Washington, 813 Santa Barbara Street, Pasadena, CA 91101 (United States); Hirano, Teruyuki [Department of Physics, University of Tokyo, Tokyo 113-0033 (Japan); Bakos, Gaspar; Hartman, Joel D. [Department of Astrophysical Sciences, Princeton University, Peyton Hall, Princeton, NJ 08544 (United States)

2012-09-20T23:59:59.000Z

359

Conformally curved binary black hole initial data including tidal deformations and outgoing radiation  

E-Print Network [OSTI]

(Abridged) By asymptotically matching a post-Newtonian (PN) metric to two tidally perturbed Schwarzschild metrics, we generate approximate initial data (in the form of a 4-metric) for a nonspinning black hole binary in a circular orbit. We carry out this matching through O(v^4) in the binary's orbital velocity v, so the resulting data are conformally curved. Far from the holes, we use the appropriate PN metric that accounts for retardation, which we construct using the highest-order PN expressions available to compute the binary's past history. The data set's uncontrolled remainders are thus O(v^5) throughout the timeslice; we also generate an extension to the data set that has uncontrolled remainders of O(v^6) in the purely PN portion of the timeslice (i.e., not too close to the holes). The resulting data are smooth, since we join all the metrics together by smoothly interpolating between them. We perform this interpolation using transition functions constructed to avoid introducing excessive additional constraint violations. Due to their inclusion of tidal deformations and outgoing radiation, these data should substantially reduce the initial spurious ("junk") radiation observed in current simulations that use conformally flat initial data. Such reductions in the nonphysical components of the initial data will be necessary for simulations to achieve the accuracy required to supply Advanced LIGO and LISA with the templates necessary for parameter estimation.

Nathan K. Johnson-McDaniel; Nicolas Yunes; Wolfgang Tichy; Benjamin J. Owen

2009-07-06T23:59:59.000Z

360

The flattenings of the layers of rotating planets and satellites deformed by a tidal potential  

E-Print Network [OSTI]

We consider the Clairaut theory of the equilibrium ellipsoidal figures for differentiated non-homogeneous bodies in non-synchronous rotation adding to it a tidal deformation due to the presence of an external gravitational force. We assume that the body is a fluid formed by $n$ homogeneous layers of ellipsoidal shape and we calculate the external polar flattenings and the mean radius of each layer, or, equivalently, their semiaxes. To first order in the flattenings, the general solution can be written as $\\epsilon_k={\\cal H}_k*\\epsilon_h$ and $\\mu_k={\\cal H}_k*\\mu_h$, where $\\cal{H}_k$ is a characteristic coefficient for each layer which only depends on the internal structure of the body and $\\epsilon_h, \\mu_h$ are the flattenings of the equivalent homogeneous problem. For the continuous case, we study the Clairaut differential equation for the flattening profile, using the Radau transformation to find the boundary conditions when the tidal potential is added. Finally, the theory is applied to several example...

Folonier, Hugo; Kholshevnikov, Konstantin V

2015-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "inlet pilot tidal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Exploration applications of a transgressive tidal flats model to Mississippian Midale carbonates, eastern Williston Basin  

SciTech Connect (OSTI)

Midale (Mississippian) production was first established in 1953 in Saskatchewan, Canada. The unit was initially defined in the subsurface as the carbonate interval between the top of the Frobisher Anhydrite and the base of the Midale Anhydrite. That nomenclature is used in this report. During 1953, Midale production was found in the United States portion of the Williston basin in Bottineau County, North Dakota. Later exploration extended Midale production westward into Burke County, North Dakota. Cumulative production from the Midale is approximately 660 million bbl, of which 640 million bbl are from Canadian fields. Initially, hydrocarbon entrapment in the Midale was believed to be controlled by the Mississippian subcrop, with the Burke County production controlled by low-relief structural closure. Petrographic examination of cores and cuttings from the Midale in both Saskatchewan, Canada, and Burke and Bottineau Counties, North Dakota, indicates that production is controlled by facies changes within the unit. Stratigraphic traps are formed by the lateral and vertical changes from grain-supported facies deposited in tidal channel, subtidal bar, or beach settings; seals are formed by mud-rich sediments. Use of a transgressive carbonate tidal flats model best explains current production patterns and indicates substantial potential for additional production in eastern North Dakota and South Dakota.

Porter, L.A.; Reid, R.S.R.

1985-05-01T23:59:59.000Z

362

Exploration applications of a transgressive tidal-flats model to Mississippian Midale carbonates, eastern Williston Basin  

SciTech Connect (OSTI)

Midale (Mississippian) production was first indicated in 1953 in Saskatchewan, Canada. The unit was initially defined in the subsurface as the carbonate interval between the top of the Frobisher Anhydrite and the base of the Midale Anhydrite. This same nomenclature is used in this paper. In 1953, Midale production was found on the US side of the Williston basin in Bottineau County, North Dakota. Later exploration extended Midale production westward into Burke County, North Dakota, in 1955. Cumulative production from the Midale is approximately 660 million bbl with 640 million from the Canadian side of the Williston basin. Initially, hydrocarbon entrapment in the Midale was believed to be controlled by the Mississippian subcrop, with the Burke County production controlled by low-relief structural closure. Petrographic examination of cores and cuttings from the Midale in both Saskatchewan, Canada, and Burke and Bottineau Counties, North Dakota, indicates that production is controlled by facies changes within the unit. Stratigraphic traps are formed by the lateral and vertical changes from grain-supported facies deposited in tidal-channel, subtidal-bar, or beach settings; seals are formed by mud-rich sediments. Use of a transgressive carbonate tidal-flats model best explains current production patterns and indicates substantial potential for additional production in eastern North Dakota and South Dakota.

Porter, L.A.; Reid, F.S.

1985-02-01T23:59:59.000Z

363

Formation of planetary debris discs around white dwarfs I: Tidal disruption of an extremely eccentric asteroid  

E-Print Network [OSTI]

25%-50% of all white dwarfs (WDs) host observable and dynamically active remnant planetary systems based on the presence of close-in circumstellar dust and gas and photospheric metal pollution. Currently-accepted theoretical explanations for the origin of this matter include asteroids that survive the star's giant branch evolution at au-scale distances and are subsequently perturbed onto WD-grazing orbits following stellar mass loss. In this work we investigate the tidal disruption of these highly-eccentric (e > 0.98) asteroids as they approach and tidally disrupt around the WD. We analytically compute the disruption timescale and compare the result with fully self-consistent numerical simulations of rubble piles by using the N-body code PKDGRAV. We find that this timescale is highly dependent on the orbit's pericentre and largely independent of its semimajor axis. We establish that spherical asteroids readily break up and form highly eccentric collisionless rings, which do not accrete onto the WD without add...

Veras, Dimitri; Bonsor, Amy; Gaensicke, Boris T

2014-01-01T23:59:59.000Z

364

ULTRAVIOLET/OPTICAL/INFRARED COLOR SEQUENCES ALONG THE TIDAL RING/ARM OF Arp 107  

SciTech Connect (OSTI)

We construct UV/optical/IR spectral energy distributions for 29 star forming regions in the interacting galaxy Arp 107, using GALEX UV, Sloan Digitized Sky Survey optical, and Spitzer infrared images. In an earlier study utilizing only the Spitzer data, we found a sequence in the mid-infrared colors of star-forming knots along the strong tidal arm in this system. In the current study, we find sequences in the UV/optical colors along the tidal arm that mirror those in the mid-infrared, with blue UV/optical colors found for regions that are red in the mid-infrared, and vice versa. With single-burst stellar population synthesis models, we find a sequence in the average stellar age along this arm, with younger stars preferentially located further out in the arm. Models that allow two populations of different ages and dust attenuations suggest that there may be both a young component and an older population present in these regions. Thus the observed color sequences may be better interpreted as a sequence in the relative proportion of young and old stars along the arm, with a larger fraction of young stars near the end. Comparison with star forming regions in other interacting galaxies shows that the Arp 107 regions are relatively quiescent, with less intense star formation than in many other systems.

Lapham, Ryen C.; Smith, Beverly J. [Department of Physics and Astronomy, East Tennessee State University, Johnson City, TN 37614 (United States); Struck, Curtis, E-mail: rlapham@nmt.edu, E-mail: smithbj@etsu.edu, E-mail: curt@iastate.edu [Department of Physics and Astronomy, Iowa State University, Ames, IA 50011 (United States)

2013-05-15T23:59:59.000Z

365

Revealing the escape mechanism of three-dimensional orbits in a tidally limited star cluster  

E-Print Network [OSTI]

The aim of this work is to explore the escape process of three-dimensional orbits in a star cluster rotating around its parent galaxy in a circular orbit. The gravitational field of the cluster is represented by a smooth, spherically symmetric Plummer potential, while the tidal approximation was used to model the steady tidal field of the galaxy. We conduct a thorough numerical analysis distinguishing between regular and chaotic orbits as well as between trapped and escaping orbits, considering only unbounded motion for several energy levels. It is of particular interest to locate the escape basins towards the two exit channels and relate them with the corresponding escape times of the orbits. For this purpose, we split our investigation into three cases depending on the initial value of the $z$ coordinate which was used for launching the stars. The most noticeable finding is that the majority of stars initiated very close to the primary $(x,y)$ plane move in chaotic orbits and they remain trapped for vast time intervals, while orbits with relatively high values of $z_0$ on the other hand, form well-defined basins of escape. It was also observed, that for energy levels close to the critical escape energy the escape rates of orbits are large, while for much higher values of energy most of the orbits have low escape periods or they escape immediately to infinity. We hope our outcomes to be useful for a further understanding of the dissolution process and the escape mechanism in open star clusters.

Euaggelos E. Zotos

2014-11-18T23:59:59.000Z

366

Asset-building Initiatives in Peru and Colombia: Pilot Study and Directions  

E-Print Network [OSTI]

Asset-building Initiatives in Peru and Colombia: Pilot Study and Directions By Yves Moury 2006-building pilot initiatives have begun in Southern Peru and one is soon to be approved in Colombia. In rural Peru in Peru and Colombia. The first, a six-year asset-building pilot program, is now underway in southern Peru

Subramanian, Venkat

367

Model predictive control of a pilot-scale distillation column using a programmable automation controller  

E-Print Network [OSTI]

Model predictive control of a pilot-scale distillation column using a programmable automation). The controller is tested on a pilot-scale binary distillation column to track reference temperatures. A majorRIO) to control a pilot-scale binary distillation col- umn. Both the PI-controllers and the supervising online MPC

368

Multi-Pollutant Emissions Control: Pilot Plant Study of Technologies for Reducing Hg, SO3, NOx and CO2 Emissions  

SciTech Connect (OSTI)

A slipstream pilot plant was built and operated to investigate technology to adsorb mercury (Hg) onto the existing particulate (i.e., fly ash) by cooling flue gas to 200-240 F with a Ljungstrom-type air heater or with water spray. The mercury on the fly ash was then captured in an electrostatic precipitator (ESP). An alkaline material, magnesium hydroxide (Mg(OH){sub 2}), is injected into flue gas upstream of the air heater to control sulfur trioxide (SO{sub 3}), which prevents acid condensation and corrosion of the air heater and ductwork. The slipstream was taken from a bituminous coal-fired power plant. During this contract, Plant Design and Construction (Task 1), Start Up and Maintenance (Task 2), Baseline Testing (Task 3), Sorbent Testing (Task 4), Parametric Testing (Task 5), Humidification Tests (Task 6), Long-Term Testing (Task 7), and a Corrosion Study (Task 8) were completed. The Mercury Stability Study (Task 9), ESP Report (Task 11), Air Heater Report (Task 12) and Final Report (Task 14) were completed. These aspects of the project, as well as progress on Public Outreach (Task 15), are discussed in detail in this final report. Over 90% mercury removal was demonstrated by cooling the flue gas to 200-210 F at the ESP inlet; baseline conditions with 290 F flue gas gave about 26% removal. Mercury removal is sensitive to flue gas temperature and carbon content of fly ash. At 200-210 F, both elemental and oxidized mercury were effectively captured at the ESP. Mg(OH){sub 2} injection proved effective for removal of SO{sub 3} and eliminated rapid fouling of the air heater. The pilot ESP performed satisfactorily at low temperature conditions. Mercury volatility and leaching tests did not show any stability problems. No significant corrosion was detected at the air heater or on corrosion coupons at the ESP. The results justify larger-scale testing/demonstration of the technology. These conclusions are presented and discussed in two presentations given in July and September of 2005 and are included in Appendices E and F.

Michael L. Fenger; Richard A. Winschel

2005-08-31T23:59:59.000Z

369

MBM fuel feeding system design and evaluation for FBG pilot plant  

SciTech Connect (OSTI)

Highlights: Black-Right-Pointing-Pointer A 1-5 g/s fuel feeding system for pilot scale FBG was designed, built and tested. Black-Right-Pointing-Pointer Multiple conveying stages improve pressure balancing, flow control and stability. Black-Right-Pointing-Pointer Secondary conveyor stage reduced output irregularity from 47% to 15%. Black-Right-Pointing-Pointer Pneumatic air sparging effective in dealing with poor flow ability of MBM powder. Black-Right-Pointing-Pointer Pneumatic injection port plugs with char at gasification temperature of 850 Degree-Sign C. - Abstract: A biomass fuel feeding system has been designed, constructed and evaluated for a fluidized bed gasifier (FBG) pilot plant at the University of Saskatchewan (Saskatoon, SK, Canada). The system was designed for meat and bone meal (MBM) to be injected into the gasifier at a mass flow-rate range of 1-5 g/s. The designed system consists of two stages of screw conveyors, including a metering stage which controlled the flow-rate of fuel, a rotary airlock and an injection conveyor stage, which delivered that fuel at a consistent rate to the FBG. The rotary airlock which was placed between these conveyors, proved unable to maintain a pressure seal, thus the entire conveying system was sealed and pressurized. A pneumatic injection nozzle was also fabricated, tested and fitted to the end of the injection conveyor for direct injection and dispersal into the fluidized bed. The 150 mm metering screw conveyor was shown to effectively control the mass output rate of the system, across a fuel output range of 1-25 g/s, while the addition of the 50 mm injection screw conveyor reduced the irregularity (error) of the system output rate from 47% to 15%. Although material plugging was found to be an issue in the inlet hopper to the injection conveyor, the addition of air sparging ports and a system to pulse air into those ports was found to successfully eliminate this issue. The addition of the pneumatic injection nozzle reduced the output irregularity further to 13%, with an air supply of 50 slpm as the minimum air supply to drive this injector. After commissioning of this final system to the FBG reactor, the injection nozzle was found to plug with char however, and was subsequently removed from the system. Final operation of the reactor continues satisfactorily with the two screw conveyors operating at matching pressure with the fluidized bed, with the output rate of the system estimated based on system characteristic equations, and confirmed by static weight measurements made before and after testing. The error rate by this method is reported to be approximately 10%, which is slightly better than the estimated error rate of 15% for the conveyor system. The reliability of this measurement prediction method relies upon the relative consistency of the physical properties of MBM with respect to its bulk density and feeding characteristics.

Campbell, William A., E-mail: bill.campbell@usask.ca [Fluidization Laboratory of Saskatchewan (FLASK) (Canada) and Department of Chemical and Biological Engineering, University of Saskatchewan (Canada); Fonstad, Terry [Department of Chemical and Biological Engineering, University of Saskatchewan (Canada); Pugsley, Todd [Suncor Energy Inc., Calgary, Alberta (Canada); Gerspacher, Regan [Fluidization Laboratory of Saskatchewan (FLASK) (Canada); Department of Chemical and Biological Engineering, University of Saskatchewan (Canada)

2012-06-15T23:59:59.000Z

370

VOC Emission Control with the Brayton Cycle Pilot Plant Operations  

E-Print Network [OSTI]

A mobile pilot plant capable of removing VOC emissions from exhaust air streams was cooperatively funded by SCE, EPRI, 3M, and NUCON. Valuable information about the process and the recovery operation has been gained by performing tests at a number...

Enneking, J. C.

371

October 2, 2009 Request for Pilot Proposals in Nanomedicine  

E-Print Network [OSTI]

October 2, 2009 Request for Pilot Proposals in Nanomedicine The Center for Nanoscience and pending funding. Award information: http://nanoscience.bu.edu/nanomedicine/ - Stage I: $20k, 6 months Stage II funding. Proposals will be reviewed by a panel consisting of CRC faculty in nanoscience and MED

372

CIP Eco-innovation Pilot and market replication projects  

E-Print Network [OSTI]

CIP Eco-innovation Pilot and market replication projects Call 2008 Call Identifier: CIP-EIP-Eco-Innovation-2008 GUIDE FOR PROPOSERS CIP Eco-innovation website: http to the Competitiveness and Innovation Programme (CIP) and the Entrepreneurship and Innovation Programme (EIP) (2008

De Cindio, Fiorella

373

Results from the Texas Pilot Project on Superior Energy Performance  

E-Print Network [OSTI]

Energy Performance. Five plants in Texas are participating in this national pilot project, which began July 2008. ESL-IE-09-05-02 Proceedings of the Thirty-First Industrial Energy Technology Conference, New Orleans, LA, May 12-15, 2009 ...

Ferland, K.

374

A Pilot Project in Preparation of an Aerodynamic Optimization Workshop  

E-Print Network [OSTI]

A Pilot Project in Preparation of an Aerodynamic Optimization Workshop with Lessons Learned John C-scale Aerodynamic Optimization Workshop. Three independent optimization efforts were conducted concurrently, each in the preparation of a possible future workshop on aerodynamic shape optimization. 1.0 Introduction During AIAA

Jameson, Antony

375

Pilot Stabilisatie Cavernes Twente Advies over reikwijdte en detailniveau  

E-Print Network [OSTI]

Pilot Stabilisatie Cavernes Twente Advies over reikwijdte en detailniveau van het ondergrondse holtes (cavernes) ontstaan. Van deze cavernes voldoen er 63 niet aan de huidige regels ter voorkoming van daling aan het aardoppervlak.1 In de huidige praktijk worden potentieel instabiele2 cavernes

Hack, Robert

376

Fireaxe: The DHS Secure Design Competition Pilot [Extended Abstract  

E-Print Network [OSTI]

discusses the methods at- tempted and lessons learned, as well as future directions and competition for discovering, learning, and testing secure design principles. Fireaxe is the pilot competition that attempts.S. Department of Energy's National Nuclear Secu- rity Administration under contract DE-AC04-94AL85000

Vorobeychik, Eugene

377

Weeks Island gravity stable CO2 pilot: Final report  

SciTech Connect (OSTI)

The Weeks Island ''S'' sand Reservoir B (''S'' RB) gravity-stable CO2 field test was completed during February 1988. Injection started in October 1978 and production began in January 1981 in this high-permeability, steeply-dipping sandstone reservoir. About 264,000 barrels of oil or 65 percent of the starting volume has been recovered. A 24-percent pore-volume slug of CO2 mixed with about six mole percent of natural gas (mostly methane) was injected at the start of the pilot. Since 1983, produced CO2 plus hydrocarbon gases have been recycled. CO2 usage statistics are 9.34 MCF/BO with recycle and 3.24 MCF/BO based on purchased CO2. Previous annual reports document the pilot design, implementation, and early results for the 1977 to June 1981 time period. This report is a review of early pilot history and a more detailed account of the post June 1981 results and overall interpretation. A reservoir-simulation history match of pilot performance plus core and log data from a 1983 swept-zone evaluation well are described in this report. A brief description of the production facility and an account of the corrosion control program are also included. 11 refs., 34 figs.

Johnston, J.R.; Perry, G.E.

1989-01-01T23:59:59.000Z

378

NetPilot: Automating Datacenter Network Failure Mitigation  

E-Print Network [OSTI]

NetPilot: Automating Datacenter Network Failure Mitigation Xin Wu Daniel Turner Chao-Chih Chen Duke-on and fast-response online ser- vices have driven modern datacenter networks to undergo tremen- dous growth of critical failures commonly encountered in production datacenter networks. Categories and Subject

379

Nortel CallPilot A-Style Command Comparison Card  

Broader source: Energy.gov (indexed) [DOE]

Reserved. CallPilot 4.0 or later. Issue Standard 01.01 March 2007 1 Skip Back 2 Pause Resume 3 Skip Forward 4 Re-Play 5 Envelope 6 Forward 7 Delete 8 Reply 9 Save * Exit 0 Help ...

380

Making the World a Witness report on the pilot phase  

E-Print Network [OSTI]

of this unlikely consortium as the beginning of a paradigm shift, when instruments of national security, heretoforeMaking the World a Witness report on the pilot phase december 2010 - june 2012 Satellite Sentinel december 2010 - june 2012 Satellite Sentinel Project #12;Table of Contents Introduction by Charlie Clements

Liu, Xiaole Shirley

Note: This page contains sample records for the topic "inlet pilot tidal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Grid Computing Workloads: Bags of Tasks, Workflows, Pilots, and Others  

E-Print Network [OSTI]

1 Grid Computing Workloads: Bags of Tasks, Workflows, Pilots, and Others Alexandru Iosup and Dick, the Netherlands Contact info: A.Iosup@tudelft.nl, D.H.J.Epema@tudelft.nl Abstract--In the mid 1990s, the grid computing com- munity promised the "compute power grid," a utility com- puting infrastructure for scientists

Iosup, Alexandru

382

Regional Drinking Water Security District Level Pilot Project  

E-Print Network [OSTI]

Regional Drinking Water Security District Level Pilot Project Concept Note Milind Sohoni Head that most habitations of several talukas will face drinking water stress for much of the coming year. The central objective of the project will be to ensure regional drinking water security for a district

Sohoni, Milind

383

Waste Isolation Pilot Plant Nitrate Salt Bearing Waste Container  

E-Print Network [OSTI]

of Energy (DOE) and Nuclear Waste Partnership LLC (NWP), collectively referred to as the Permittees Isolation Plan (Plan) for identified nitrate salt bearing waste disposed in the Waste Isolation Pilot Plant detailed proposal for the expedited closure of underground Hazardous Waste Disposal Unit (HWDU) Panel 6, so

Napp, Nils

384

Wind-To-Hydrogen Energy Pilot Project  

SciTech Connect (OSTI)

WIND-TO-HYDROGEN ENERGY PILOT PROJECT: BASIN ELECTRIC POWER COOPERATIVE In an effort to address the hurdles of wind-generated electricity (specifically wind's intermittency and transmission capacity limitations) and support development of electrolysis technology, Basin Electric Power Cooperative (BEPC) conducted a research project involving a wind-to-hydrogen system. Through this effort, BEPC, with the support of the Energy & Environmental Research Center at the University of North Dakota, evaluated the feasibility of dynamically scheduling wind energy to power an electrolysis-based hydrogen production system. The goal of this project was to research the application of hydrogen production from wind energy, allowing for continued wind energy development in remote wind-rich areas and mitigating the necessity for electrical transmission expansion. Prior to expending significant funding on equipment and site development, a feasibility study was performed. The primary objective of the feasibility study was to provide BEPC and The U.S. Department of Energy (DOE) with sufficient information to make a determination whether or not to proceed with Phase II of the project, which was equipment procurement, installation, and operation. Four modes of operation were considered in the feasibility report to evaluate technical and economic merits. Mode 1 - scaled wind, Mode 2 - scaled wind with off-peak, Mode 3 - full wind, and Mode 4 - full wind with off-peak In summary, the feasibility report, completed on August 11, 2005, found that the proposed hydrogen production system would produce between 8000 and 20,000 kg of hydrogen annually depending on the mode of operation. This estimate was based on actual wind energy production from one of the North Dakota (ND) wind farms of which BEPC is the electrical off-taker. The cost of the hydrogen produced ranged from $20 to $10 per kg (depending on the mode of operation). The economic sensitivity analysis performed as part of the feasibility study showed that several factors can greatly affect, both positively and negatively, the "per kg" cost of hydrogen. After a September 15, 2005, meeting to evaluate the advisability of funding Phase II of the project DOE concurred with BEPC that Phase I results did warrant a "go" recommendation to proceed with Phase II activities. The hydrogen production system was built by Hydrogenics and consisted of several main components: hydrogen production system, gas control panel, hydrogen storage assembly and hydrogen-fueling dispenser The hydrogen production system utilizes a bipolar alkaline electrolyzer nominally capable of producing 30 Nm3/h (2.7 kg/h). The hydrogen is compressed to 6000 psi and delivered to an on-site three-bank cascading storage assembly with 80 kg of storage capacity. Vehicle fueling is made possible through a Hydrogenics-provided gas control panel and dispenser able to fuel vehicles to 5000 psi. A key component of this project was the development of a dynamic scheduling system to control the wind energy's variable output to the electrolyzer cell stacks. The dynamic scheduling system received an output signal from the wind farm, processed this signal based on the operational mode, and dispatched the appropriate signal to the electrolyzer cell stacks. For the study BEPC chose to utilize output from the Wilton wind farm located in central ND. Site design was performed from May 2006 through August 2006. Site construction activities were from August to November 2006 which involved earthwork, infrastructure installation, and concrete slab construction. From April - October 2007, the system components were installed and connected. Beginning in November 2007, the system was operated in a start-up/shakedown mode. Because of numerous issues, the start-up/shakedown period essentially lasted until the end of January 2008, at which time a site acceptance test was performed. Official system operation began on February 14, 2008, and continued through the end of December 2008. Several issues continued to prevent consistent operation, resulting in operation o

Ron Rebenitsch; Randall Bush; Allen Boushee; Brad G. Stevens; Kirk D. Williams; Jeremy Woeste; Ronda Peters; Keith Bennett

2009-04-24T23:59:59.000Z

385

Environmental links to interannual variability in shellfish toxicity in Cobscook Bay and eastern Maine, a strongly tidally mixed coastal region  

E-Print Network [OSTI]

Environmental links to interannual variability in shellfish toxicity in Cobscook Bay and eastern e i n f o Keywords: Harmful algal blooms Gulf of Maine Cobscook Bay Shellfish toxicity a b s t r a c of Cobscook Bay, where strong tidal mixing tends to reduce seasonal variability in oceanographic properties

Townsend, David W.

386

NAME: Sears Point Tidal Restoration Project LOCATION: Near Petaluma, CA, in the San Pablo Bay and Tolay Creek Watersheds  

E-Print Network [OSTI]

of estuarine habitat comprised of deep and shallow water habitat, mudflats, salt marsh, and wetlandNAME: Sears Point Tidal Restoration Project LOCATION: Near Petaluma, CA, in the San Pablo Bay PROJECT DESCRIPTION: Sears Point, the proposed project site, consists of approximately 960 acres of diked

US Army Corps of Engineers

387

On the statistical stability of the M2 barotropic and baroclinic tidal characteristics from along-track TOPEX//Poseidon  

E-Print Network [OSTI]

with internal tidal wave activity and for those who assimilate altimetric data in their models by giving-track TOPEX//Poseidon satellite altimetry analysis Loren Carre`re, Christian Le Provost, and Florent Lyard. [1] An along-track analysis of 7 years of TOPEX/Poseidon (T/P) data has been performed on the global

388

Tidally-induced thermonuclear Supernovae Stephan Rosswog1, Enrico Ramirez-Ruiz2, W. Raphael Hix3  

E-Print Network [OSTI]

Tidally-induced thermonuclear Supernovae Stephan Rosswog1, Enrico Ramirez-Ruiz2, W. Raphael Hix3 1 in a thermonuclear explosion. These explosions are not restricted to progenitor masses close to the Chandrasekhar thermonuclear supernova together with an X-ray flare thus whistle-blows the existence of such moderate

Rosswog, Stephan

389

MHK Projects/BioSTREAM Pilot Plant | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpIncMAK Technologies Jump to:BW2 Tidal < MHK

390

MHK Projects/CETO Precommercial Pilot Project | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpIncMAK Technologies Jump to:BW2 Tidal <CETO La Reunion <

391

A Tidally-Disrupted Asteroid Around the White Dwarf G29-38  

E-Print Network [OSTI]

The infrared excess around the white dwarf G29-38 can be explained by emission from an opaque flat ring of dust with an inner radius 0.14 of the radius of the Sun and an outer radius approximately equal to the Sun's. This ring lies within the Roche region of the white dwarf where an asteroid could have been tidally destroyed, producing a system reminiscent of Saturn's rings. Accretion onto the white dwarf from this circumstellar dust can explain the observed calcium abundance in the atmosphere of G29-38. Either as a bombardment by a series of asteroids or because of one large disruption, the total amount of matter accreted onto the white dwarf may have been comparable to the total mass of asteroids in the Solar System, or, equivalently, about 1% of the mass in the asteroid belt around the main sequence star zeta Lep.

M. Jura

2003-01-21T23:59:59.000Z

392

On the tidal interaction of massive extra-solar planets on highly eccentric orbit  

E-Print Network [OSTI]

In this paper we develop a theory of disturbances induced by the stellar tidal field in a fully convective slowly rotating planet orbiting on a highly eccentric orbit around a central star. We show that there are two contributions to the mode energy and angular momentum gain due to impulsive tidal interaction: a) 'the quasi-static' contribution which requires dissipative processes operating in the planet; b) the dynamical contribution associated with excitation of modes of oscillation. These contributions are obtained self-consistently from a single set of the governing equations. We calculate a critical 'equilibrium' value of angular velocity of the planet \\Omega_{crit} determined by the condition that action of the dynamical tides does not alter the angular velocity at that rotation rate. We show that this can be much larger than the corresponding rate associated with quasi-static tides and that at this angular velocity, the rate of energy exchange is minimised. We also investigate the conditions for the stochastic increase in oscillation energy that may occur if many periastron passages are considered. We make some simple estimates of time scale of circularization of initially eccentric orbit due to tides, using a realistic model of the planet, for orbits withperiods after circularization typical of those observed for extra-solar planets P_{obs} > 3days. We find that dynamic tides could have produced a very large decrease of the semi-major axis of a planet with mass of the order of the Jupiter mass M_{J} and final periods P_{obs} < 4.5days on a time-scale < a few Gyrs. We also discuss several unresolved issues in the context of the scenario of the orbit circularization due to dynamic tides.

P. B. Ivanov; J. C. B. Papaloizou

2003-10-09T23:59:59.000Z

393

Evidence for tidal interaction and merger as the origin of galaxy morphology evolution in compact groups  

E-Print Network [OSTI]

We present the results of a morphological study based on NIR images of 25 galaxies, with different levels of nuclear activity, in 8 Compact Groups of Galaxies (CGs). We perform independently two different analysis: a isophotal study and a study of morphological asymmetries. The results yielded by the two analysis are highly consistent. For the first time, it is possible to show that deviations from pure ellipses are produced by inhomogeneous stellar mass distributions related to galaxy interactions and mergers. We find evidence of mass asymmetries in 74% of the galaxies in our sample. In 59% of these cases, the asymmetries come in pairs, and are consistent with tidal effects produced by the proximity of companion galaxies. The symmetric galaxies are generally small in size or mass, inactive, and have an early-type morphology. In 20% of the galaxies we find evidence for cannibalism. In 36% of the early-type galaxies the color gradient is positive (blue nucleus) or flat. Summing up these results, as much as 52% of the galaxies in our sample could show evidence of an on going or past mergers. Our observations suggest that galaxies in CGs merge more frequently under ``dry'' conditions. The high frequency of interacting and merging galaxies observed in our study is consistent with the bias of our sample towards CGs of type B, which represents the most active phase in the evolution of the groups. In these groups we also find a strong correlation between asymmetries and nuclear activity in early-type galaxies. This correlation allows us to identify tidal interactions and mergers as the cause of galaxy morphology transformation in CGs.[abridge

R. Coziol; I. Plauchu-Frayn

2007-02-10T23:59:59.000Z

394

Waste Isolation Pilot Plant simulated RH TRU waste experiments: Data and interpretation pilot  

SciTech Connect (OSTI)

The simulated, i.e., nonradioactive remote-handled transuranic waste (RH TRU) experiments being conducted underground in the Waste Isolation Pilot Plant (WIPP) were emplaced in mid-1986 and have been in heated test operation since 9/23/86. These experiments involve the in situ, waste package performance testing of eight full-size, reference RH TRU containers emplaced in horizontal, unlined test holes in the rock salt ribs (walls) of WIPP Room T. All of the test containers have internal electrical heaters; four of the test emplacements were filled with bentonite and silica sand backfill materials. We designed test conditions to be ``near-reference`` with respect to anticipated thermal outputs of RH TRU canisters and their geometrical spacing or layout in WIPP repository rooms, with RH TRU waste reference conditions current as of the start date of this test program. We also conducted some thermal overtest evaluations. This paper provides a: detailed test overview; comprehensive data update for the first 5 years of test operations; summary of experiment observations; initial data interpretations; and, several status; experimental objectives -- how these tests support WIPP TRU waste acceptance, performance assessment studies, underground operations, and the overall WIPP mission; and, in situ performance evaluations of RH TRU waste package materials plus design details and options. We provide instrument data and results for in situ waste container and borehole temperatures, pressures exerted on test containers through the backfill materials, and vertical and horizontal borehole-closure measurements and rates. The effects of heat on borehole closure, fracturing, and near-field materials (metals, backfills, rock salt, and intruding brine) interactions were closely monitored and are summarized, as are assorted test observations. Predictive 3-dimensional thermal and structural modeling studies of borehole and room closures and temperature fields were also performed.

Molecke, M.A.; Argueello, G.J.; Beraun, R.

1993-04-01T23:59:59.000Z

395

500-kW DCHX pilot-plant evaluation testing  

SciTech Connect (OSTI)

Field tests with the 500 kW Direct Contact Pilot Plant were conducted utilizing brine from well Mesa 6-2. The tests were intended to develop comprehensive performance data, design criteria, and economic factors for the direct contact power plant. The tests were conducted in two phases. The first test phase was to determine specific component performance of the DCHX, turbine, condensers and pumps, and to evaluate chemical mass balances of non-condensible gases in the IC/sub 4/ loop and IC/sub 4/ in the brine stream. The second test phase was to provide a longer term run at nearly fixed operating conditions in order to evaluate plant performance and identify operating cost data for the pilot plant. During these tests the total accumulated run time on major system components exceeded 1180 hours with 777 hours on the turbine prime mover. Direct contact heat exchanger performance exceeded the design prediction.

Hlinak, A.; Lee, T.; Loback, J.; Nichols, K.; Olander, R.; Oshmyansky, S.; Roberts, G.; Werner, D.

1981-10-01T23:59:59.000Z

396

Industrial Gas Turbine Engine Catalytic Pilot Combustor-Prototype Testing  

SciTech Connect (OSTI)

PCI has developed and demonstrated its Rich Catalytic Lean-burn (RCL®) technology for industrial and utility gas turbines to meet DOEâ??s goals of low single digit emissions. The technology offers stable combustion with extended turndown allowing ultra-low emissions without the cost of exhaust after-treatment and further increasing overall efficiency (avoidance of after-treatment losses). The objective of the work was to develop and demonstrate emission benefits of the catalytic technology to meet strict emissions regulations. Two different applications of the RCL® concept were demonstrated: RCL® catalytic pilot and Full RCL®. The RCL® catalytic pilot was designed to replace the existing pilot (a typical source of high NOx production) in the existing Dry Low NOx (DLN) injector, providing benefit of catalytic combustion while minimizing engine modification. This report discusses the development and single injector and engine testing of a set of T70 injectors equipped with RCL® pilots for natural gas applications. The overall (catalytic pilot plus main injector) program NOx target of less than 5 ppm (corrected to 15% oxygen) was achieved in the T70 engine for the complete set of conditions with engine CO emissions less than 10 ppm. Combustor acoustics were low (at or below 0.1 psi RMS) during testing. The RCL® catalytic pilot supported engine startup and shutdown process without major modification of existing engine controls. During high pressure testing, the catalytic pilot showed no incidence of flashback or autoignition while operating over a wide range of flame temperatures. In applications where lower NOx production is required (i.e. less than 3 ppm), in parallel, a Full RCL® combustor was developed that replaces the existing DLN injector providing potential for maximum emissions reduction. This concept was tested at industrial gas turbine conditions in a Solar Turbines, Incorporated high-pressure (17 atm.) combustion rig and in a modified Solar Turbines, Incorporated Saturn engine rig. High pressure single-injector rig and modified engine rig tests demonstrated NOx less than 2 ppm and CO less than 10 ppm over a wide flame temperature operating regime with low combustion noise (<0.15% peak-to-peak). Minimum NOx for the optimized engine retrofit Full RCL® designs was less than 1 ppm with CO emissions less than 10 ppm. Durability testing of the substrate and catalyst material was successfully demonstrated at pressure and temperature showing long term stable performance of the catalytic reactor element. Stable performance of the reactor element was achieved when subjected to durability tests (>5000 hours) at simulated engine conditions (P=15 atm, Tin=400C/750F.). Cyclic tests simulating engine trips was also demonstrated for catalyst reliability. In addition to catalyst tests, substrate oxidation testing was also performed for downselected substrate candidates for over 25,000 hours. At the end of the program, an RCL® catalytic pilot system has been developed and demonstrated to produce NOx emissions of less than 3 ppm (corrected to 15% O2) for 100% and 50% load operation in a production engine operating on natural gas. In addition, a Full RCL® combustor has been designed and demonstrated less than 2 ppm NOx (with potential to achieve 1 ppm) in single injector and modified engine testing. The catalyst/substrate combination has been shown to be stable up to 5500 hrs in simulated engine conditions.

Shahrokh Etemad; Benjamin Baird; Sandeep Alavandi; William Pfefferle

2009-09-30T23:59:59.000Z

397

Results from a pilot cell test of cermet anodes  

SciTech Connect (OSTI)

Goal was to develop long-lasting, energy-efficient anodes for Hall-Heroult cells used to produce Al metal. The anodes were made from a ceramic/metal composite consisting of NiO and NiFe{sub 2}O{sub 4} and a Cu/Ni metal phase. Thirteen cermet anodes were tested at Reynolds Metals Co., Muscle Shoals, AL. All anodes corroded severely during the pilot test. Electrolyte components were found deep within the anodes. However, there were many deficiencies in the pilot cell test, mainly the failure to maintain optimal operating conditions. It is concluded that there is a variety of fabrication and operational considerations that need to be addressed carefully in any future testing. 118 figs, 16 tabs, 17 refs.(DLC)

Windisch, Jr, C F; Strachan, D M; Henager, Jr, C H; Greenwell, E N [Pacific Northwest Lab., Richland, WA (United States); Alcorn, T R [Reynolds Metals Co., Muscle Shoals, AL (United States). Mfg. Technology Lab.

1992-08-01T23:59:59.000Z

398

The pilot way to Grid resources using glideinWMS  

SciTech Connect (OSTI)

Grid computing has become very popular in big and widespread scientific communities with high computing demands, like high energy physics. Computing resources are being distributed over many independent sites with only a thin layer of Grid middleware shared between them. This deployment model has proven to be very convenient for computing resource providers, but has introduced several problems for the users of the system, the three major being the complexity of job scheduling, the nonuniformity of computer resources, and the lack of good job monitoring. Pilot jobs address all the above problems by creating a virtual private computing pool on top of Grid resources. This paper presents both the general pilot concept, as well as a concrete implementation, called glideinWMS, deployed in the Open Science Grid.

Sfiligoi, Igor; /Fermilab; Bradley, Daniel C.; /Wisconsin U., Madison; Holzman, Burt; Mhashilkar, Parag; /Fermilab; Padhi, Sanjay; Wurthwrin, Frank; /UC, San Diego

2010-09-01T23:59:59.000Z

399

High efficiency waste to energy facility -- Pilot plant design  

SciTech Connect (OSTI)

Waste To Energy facilities are commonly acceptable to the environment and give benefits in two main areas: one is a hygienic waste disposal and another is waste heat energy recovery to save fossil fuel consumption. Recovered energy is used for electricity supply, and it is required to increase the efficiency of refuse to electric energy conversion, and to spread the plant construction throughout the country of Japan, by the government. The national project started in 1992, and pilot plant design details were established in 1995. The objective of the project is to get 30% of energy conversion efficiency through the measure by raising the steam temperature and pressure to 500 C and 9.8 MPa respectively. The pilot plant is operating under the design conditions, which verify the success of applied technologies. This paper describes key technologies which were used to design the refuse burning boiler, which generates the highest steam temperature and pressure steam.

Orita, Norihiko; Kawahara, Yuuzou; Takahashi, Kazuyoshi; Yamauchi, Toru; Hosoda, Takuo

1998-07-01T23:59:59.000Z

400

Conceptual design of a black liquor gasification pilot plant  

SciTech Connect (OSTI)

In July 1985, Champion International completed a study of kraft black liquor gasification and use of the product gases in a combined cycle cogeneration system based on gas turbines. That study indicated that gasification had high potential as an alternative to recovery boiler technology and offered many advantages. This paper describes the design of the plant, the construction of the pilot plant, and finally presents data from operation of the plant.

Kelleher, E. G.

1987-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "inlet pilot tidal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Pilot-scale tests of HEME and HEPA dissolution process  

SciTech Connect (OSTI)

A series of pilot-scale demonstration tests for the dissolution of High Efficiency Mist Eliminators (HEME`s) and High Efficiency Particulate Airfilters (HEPA) were performed on a 1/5th linear scale. These fiberglass filters are to be used in the Defense Waste Processing Facility (DWPF) to decontaminate the effluents from the off-gases generated during the feed preparation process and vitrification. When removed, these filters will be dissolved in the Decontamination Waste Treatment Tank (DWTT) using 5 wt% NaOH solution. The contaminated fiberglass is converted to an aqueous stream which will be transferred to the waste tanks. The filter metal structure will be rinsed with process water before its disposal as low-level solid waste. The pilot-scale study reported here successfully demonstrated a simple one step process using 5 wt% NaOH solution. The proposed process requires the installation of a new water spray ring with 30 nozzles. In addition to the reduced waste generated, the total process time is reduced to 48 hours only (66% saving in time). The pilot-scale tests clearly demonstrated that the dissolution process of HEMEs has two stages - chemical digestion of the filter and mechanical erosion of the digested filter. The digestion is achieved by a boiling 5 wt% caustic solutions, whereas the mechanical break down of the digested filter is successfully achieved by spraying process water on the digested filter. An alternate method of breaking down the digested filter by increased air sparging of the solution was found to be marginally successful are best. The pilot-scale tests also demonstrated that the products of dissolution are easily pumpable by a centrifugal pump.

Qureshi, Z.H.; Strege, D.K.

1994-06-01T23:59:59.000Z

402

Comparison of Options for a Pilot Plant Fusion Nuclear Mission  

SciTech Connect (OSTI)

A fusion pilot plant study was initiated to clarify the development needs in moving from ITER to a first of a kind fusion power plant, following a path similar to the approach adopted for the commercialization of fission. The pilot plant mission encompassed component test and fusion nuclear science missions plus the requirement to produce net electricity with high availability in a device designed to be prototypical of the commercial device. Three magnetic configuration options were developed around this mission: the advanced tokamak (AT), spherical tokamak (ST) and compact stellarator (CS). With the completion of the study and separate documentation of each design option a question can now be posed; how do the different designs compare with each other as candidates for meeting the pilot plant mission? In a pro/con format this paper will examine the key arguments for and against the AT, ST and CS magnetic configurations. Key topics addressed include: plasma parameters, device configurations, size and weight comparisons, diagnostic issues, maintenance schemes, availability influences and possible test cell arrangement schemes.

Brown, T; Goldston, R J; El-Guebaly, L; Kessel, C; Neilson, G H; Malang, S; Menard, J E; Prager, S; Waganer, L; Titus, P

2012-08-27T23:59:59.000Z

403

Evaluation of nickel flash smelting through piloting and simulation  

SciTech Connect (OSTI)

An extensive study of the nickel flash smelting process has been undertaken. It is aimed at the optimization of the burner design to improve the smelting performance and to increase the throughput of the rebuilt furnace. A design-based mathematical model was developed to simulate the operation of the four burners and the reaction shaft of the flash furnace at Western Mining Corporation Ltd.`s Kalgoorlie Nickel Smelter. A modified single burner version of the model was validated against data obtained from the pilot plant at the Pyrometallurgical Research Centre (PRC) of the Sumitomo Metal Mining Co.`s Toyo Smelter. The approach taken involved experimental measurements of key process parameters in the pilot plant and detailed numerical simulation of the fluid flow, heat transfer, and combustion in the entire burner-shaft complex. Several burner designs have been tested experimentally at the pilot plant and theoretically through computer simulation. The main outcome of the study was the development of an experimentally validated mathematical model of the flash smelter providing a new powerful design tool. The insight gained about the process from the application of this tool led to the design of a more efficient nickel flash smelting process.

Varnas, S.R.; Koh, P.T.L. [CSIRO, Clayton, Victoria (Australia). Div. of Minerals; Kemori, N. [Sumitomo Metal Mining Co., Ehime (Japan)

1998-12-01T23:59:59.000Z

404

The Science Case for PILOT I: Summary and Overview  

E-Print Network [OSTI]

PILOT (the Pathfinder for an International Large Optical Telescope) is a proposed 2.5 m optical/infrared telescope to be located at Dome C on the Antarctic plateau. Conditions at Dome C are known to be exceptional for astronomy. The seeing (above ~30 m height), coherence time, and isoplanatic angle are all twice s good as at typical mid-latitude sites, while the water-vapour column, and the atmosphere and telescope thermal emission are all an order of magnitude better. These conditions enable a unique scientific capability for PILOT, which is addressed in this series of papers. The current paper presents an overview of the optical and instrumentation suite for PILO and its expected performance, a summary of the key science goals and observational approach for the facility, a discussion of the synergies between the science goals for PILOT and other telescopes, and a discussion of the future of Antarctic astronomy. Paper II and Paper III present details of the science projects divided, respectively, between the...

Lawrence, J S; Bailey, J; Navascues, D Barrado y; Bedding, T; Bland-Hawthorn, J; Bond, I; Boulanger, F; Bouwens, R; Bruntt, H; Bunker, A; Burgarella, D; Burton, M G; Busso, M; Coward, D; Cioni, M -R; Durand, G; Eiroa, C; Epchtein, N; Gehrels, N; Gillingham, P; Glazebrook, K; Haynes, R; Kiss, L; Lagage, P O; Bertre, T Le; MacKay, C; Maillard, J P; McGrath, A; Minier, V; Mora, A; Olsen, K; Persi, P; Pimbblet, K; Quimby, R; Saunders, W; Schmidt, B; Stello, D; Storey, J W V; Tinney, C; Tremblin, P; Wheeler, J C; Yoc, P

2009-01-01T23:59:59.000Z

405

An unstructured C-grid based method for 3-D global ocean dynamics: Free-surface formulations and tidal test cases  

E-Print Network [OSTI]

and tidal test cases G.R. Stuhne *, W.R. Peltier Department of Physics, University of Toronto, 60 St. George rights reserved. 1. Introduction In a previous paper (Stuhne and Peltier, 2006, hereafter SP), we

Peltier, W. Richard

406

Preliminary Hydrogeologic Characterization Results from the Wallula Basalt Pilot Study  

SciTech Connect (OSTI)

The DOE's Big Sky Regional Carbon Sequestration Partnership has completed drilling the first continental flood basalt sequestration pilot borehole to a total depth (TD) of 4,110 feet on the Boise White Paper Mill property at Wallula, Washington. Site suitability was assessed prior to drilling by the 2007-2008 acquisition, processing and analysis of a four-mile, five-line three component seismic swath, which was processed as a single data-dense line. Analysis of the seismic survey data indicated a composite basalt formation thickness of {approx}8,000 feet and absence of major geologic structures (i.e., faults) along the line imaged by the seismic swath. Drilling of Wallula pilot borehole was initiated on January 13, 2009 and reached TD on April 6, 2009. Based on characterization results obtained during drilling, three basalt breccia zones were identified between the depth interval of 2,716 and 2,910 feet, as being suitable injection reservoir for a subsequent CO2 injection pilot study. The targeted injection reservoir lies stratigraphically below the massive Umtanum Member of the Grande Ronde Basalt, whose flow-interior section possesses regionally recognized low-permeability characteristics. The identified composite injection zone reservoir provides a unique and attractive opportunity to scientifically study the reservoir behavior of three inter-connected reservoir intervals below primary and secondary caprock confining zones. Drill cuttings, wireline geophysical logs, and 31one-inch diameter rotary sidewall cores provided geologic data for characterization of rock properties. XRF analyses of selected rock samples provided geochemical characterizations of the rocks and stratigraphic control for the basalt flows encountered by the Wallula pilot borehole. Based on the geochemical results, the pilot borehole was terminated in the Wapshilla Ridge 1 flow of the Grande Ronde Basalt Formation. Detailed hydrologic test characterizations of 12 basalt interflow reservoir zones and 3 flow-interior/caprock intervals were performed during drilling and immediately following reaching the final borehole drilling depth (i.e., 4,110 ft). In addition, six of the 12 basalt interflow zones were selected for detailed hydrochemical characterization. Results from the detailed hydrologic test characterization program provided the primary information on basalt interflow zone transmissivity/injectivity, and caprock permeability characteristics.

B.P. McGrail; E. C. Sullivan; F. A. Spane; D. H. Bacon; G. Hund; P. D. Thorne; C. J. Thompson; S. P. Reidel; F. S. Colwell

2009-12-01T23:59:59.000Z

407

Thermal-fluid and electrochemical modeling and performance study of a planar solid oxide electrolysis cell : analysis on SOEC resistances, size, and inlet flow conditions.  

SciTech Connect (OSTI)

Argonne National Laboratory and Idaho National Laboratory researchers are analyzing the electrochemical and thermal-fluid behavior of solid oxide electrolysis cells (SOECs) for high temperature steam electrolysis using computational fluid dynamics (CFD) techniques. The major challenges facing commercialization of steam electrolysis technology are related to efficiency, cost, and durability of the SOECs. The goal of this effort is to guide the design and optimization of performance for high temperature electrolysis (HTE) systems. An SOEC module developed by FLUENT Inc. as part of their general CFD code was used for the SOEC analysis by INL. ANL has developed an independent SOEC model that combines the governing electrochemical mechanisms based on first principals to the heat transfer and fluid dynamics in the operation of SOECs. The ANL model was embedded into the commercial STAR-CD CFD software, and is being used for the analysis of SOECs by ANL. The FY06 analysis performed by ANL and reported here covered the influence of electrochemical properties, SOEC component resistances and their contributing factors, SOEC size and inlet flow conditions, and SOEC flow configurations on the efficiency and expected durability of these systems. Some of the important findings from the ANL analysis are: (1) Increasing the inlet mass flux while going to larger cells can be a compromise to overcome increasing thermal and current density gradients while increasing the cell size. This approach could be beneficial for the economics of the SOECs; (2) The presence of excess hydrogen at the SOEC inlet to avoid Ni degradation can result in a sizeable decrease in the process efficiency; (3) A parallel-flow geometry for SOEC operation (if such a thing be achieved without sealing problems) yields smaller temperature gradients and current density gradients across the cell, which is favorable for the durability of the cells; (4) Contact resistances can significantly influence the total cell resistance and cell temperatures over a large range of operating potentials. Thus it is important to identify and avoid SOEC stack conditions leading to such high resistances due to poor contacts.

Yildiz, B.; Smith, J.; Sofu, T.; Nuclear Engineering Division

2008-06-25T23:59:59.000Z

408

E-Print Network 3.0 - aspire-va pilot study Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

aircraft and both pilots of the UAVs in this study seemed slightly more accepting of a UAV role... , should not be automated. However, as demonstrated by ... Source: Cummings,...

409

BIOENERGY AND BIOFUELS Performance of a pilot-scale continuous flow microbial  

E-Print Network [OSTI]

BIOENERGY AND BIOFUELS Performance of a pilot-scale continuous flow microbial electrolysis cell fed performance. Keywords Biohydrogen . Biomethane . Bioelectricity. Microbial electrolysis cell . Bioenergy

410

Voluntary Protection Program Onsite Review, Waste Isolation Pilot Plant- January 2013  

Broader source: Energy.gov [DOE]

Evaluation to determine whether the Waste Isolation Pilot Plant is continuing to perform at a level deserving DOE-VPP Star recognition.

411

Voluntary Protection Program Onsite Review, Waste Isolation Pilot Plant- March 2010  

Broader source: Energy.gov [DOE]

Evaluation to determine whether the Waste Isolation Pilot Plant is continuing to perform at a level deserving DOE-VPP Star recognition.

412

Voluntary Protection Program Onsite Review, Waste Isolation Pilot Plant- March 2009  

Broader source: Energy.gov [DOE]

Evaluation to determine whether the Waste Isolation Pilot Plant is continuing to perform at a level deserving DOE-VPP Star recognition.

413

TVA Partner Utilities- In-Home Energy Evaluation Pilot Program (Georgia)  

Broader source: Energy.gov [DOE]

The Tennessee Valley Authority (TVA) energy right In-Home Energy Evaluation Pilot Program encourages the installation of energy-efficiency improvements in existing single family dwellings. The...

414

E-Print Network 3.0 - arsenic pilot plant Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Sediments Jason Murnock, Master of Science Candidate, Summary: conflicting. The Erie wastewater treatment plant sludge incinerator flue gas contains arsenic but pilot tests......

415

ZeaChem Pilot Project: High-Yield Hybrid Cellulosic Ethanol Process...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Ethanol Process Using High-Impact Feedstock for Commercialization This pilot-scale integrated biorefinery will produce 250,000 gallons per year of cellulosic ethanol when...

416

Voluntary Protection Program Onsite Review, Waste Isolation Pilot Plant- February 2009  

Broader source: Energy.gov [DOE]

Evaluation to determine whether Waste Isolation Pilot Plant is continuing to perform at a level deserving DOE-VPP Star recognition.

417

E-Print Network 3.0 - amphipod pilot species Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

search results for: amphipod pilot species Page: << < 1 2 3 4 5 > >> 1 POPULATION ECOLOGY -ORIGINAL PAPER Spatial variation in parasite-induced mortality in an amphipod...

418

E-Print Network 3.0 - advanced pilot-scale cryogenic Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

pilot-scale cryogenic Page: << < 1 2 3 4 5 > >> 1 Conventional and advanced thermonuclear ignition in inertial confinement fusion Riccardo Betti Summary: Conventional and...

419

Microsoft Word - Indoor Small- and Pilot-Scale Research and Developmen...  

Broader source: Energy.gov (indexed) [DOE]

regulations); conventional laboratory operations (such as preparation of chemical standards and sample analysis); and small-scale pilot projects (generally less than 2...

420

Review of the Waste Isolation Pilot Plant Work Planning and Control...  

Office of Environmental Management (EM)

Independent Oversight Review of the Waste Isolation Pilot Plant Work Planning and Control Activities April 2013 Office of Safety and Emergency Management Evaluations Office of...

Note: This page contains sample records for the topic "inlet pilot tidal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

From Hydrogen Fuel Cells to High-Altitude-Pilot Protection Suits...  

Energy Savers [EERE]

From Hydrogen Fuel Cells to High-Altitude-Pilot Protection Suits- Mound Science and Energy Museum Programs Cover a Wide Range of Topics From Hydrogen Fuel Cells to...

422

E-Print Network 3.0 - artificial gravity pilot Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Mathematics 12 Competitive Coevolution versus Objective Fitness for an Autonomous Motorcycle Pilot Summary: Competitive Coevolution versus Objective Fitness for an Autonomous...

423

Tides and Tidal Capture in post-Main Sequence Binaries: A Period Gap for Planets Around White Dwarfs  

E-Print Network [OSTI]

The presence of a close, low-mass companion is thought to play a substantial and perhaps necessary role in shaping post-Asymptotic Giant Branch and Planetary Nebula outflows. During post-main-sequence evolution, radial expansion of the primary star, accompanied by intense winds, can significantly alter the binary orbit via tidal dissipation and mass loss. To investigate this, we couple stellar evolution models (from the zero-age main-sequence through the end of the post-main sequence) to a tidal evolution code. The binary's fate is determined by the initial masses of the primary and the companion, the initial orbit (taken to be circular), and the Reimer's mass-loss parameter. For a range of these parameters, we determine whether the orbit expands due to mass loss or decays due to tidal torques. Where a common envelope phase (CEP) ensues, we estimate the final orbital separation based on the energy required to unbind the envelope. These calculations predict a period gap for planetary companions to white dwarfs...

Nordhaus, J; Ibgui, L; Goodman, J; Burrows, A

2010-01-01T23:59:59.000Z

424

Field Measurements at River and Tidal Current Sites for Hydrokinetic Energy Development: Best Practices Manual  

SciTech Connect (OSTI)

In this report, existing data collection techniques and protocols for characterizing open channel flows are reviewed and refined to further address the needs of the MHK industry. The report provides an overview of the hydrodynamics of river and tidal channels, and the working principles of modern acoustic instrumentation, including best practices in remote sensing methods that can be applied to hydrokinetic energy site characterization. Emphasis is placed upon acoustic Doppler velocimeter (ADV) and acoustic-Doppler current profiler (ADCP) instruments, as these represent the most practical and economical tools for use in the MHK industry. Incorporating the best practices as found in the literature, including the parameters to be measured, the instruments to be deployed, the instrument deployment strategy, and data post-processing techniques. The data collected from this procedure aims to inform the hydro-mechanical design of MHK systems with respect to energy generation and structural loading, as well as provide reference hydrodynamics for environmental impact studies. The standard metrics and protocols defined herein can be utilized to guide field experiments with MHK systems.

Neary, Vincent S [ORNL; Gunawan, Budi [Oak Ridge National Laboratory (ORNL)

2011-09-01T23:59:59.000Z

425

Long Term Spectral Evolution of Tidal Disruption Candidates Selected by Strong Coronal Lines  

E-Print Network [OSTI]

We present results of follow-up optical spectroscopic observations of seven rare, extreme coronal line emitting galaxies reported by Wang et al. (2012) with Multi-Mirror Telescope (MMT). Large variations in coronal lines are found in four objects, making them strong candidates of tidal disruption events (TDE). For the four TDE candidates, all the coronal lines with ionization status higher than [Fe VII] disappear within 5-9 years. The [Fe VII] faded by a factor of about five in one object (J0952+2143) within 4 years, whereas emerged in other two without them previously. A strong increment in the [O III] flux is observed, shifting the line ratios towards the loci of active galactic nucleus on the BPT diagrams. Surprisingly, we detect a non-canonical [O III]5007/[O III]4959 2 in two objects, indicating a large column density of O$^{2+}$ and thus probably optical thick gas. This also requires a very large ionization parameter and relatively soft ionizing spectral energy distribution (e.g. blackbody with $T < ...

Yang, Chenwei; Ferland, Gary; Yuan, Weimin; Zhou, Hongyan; Jiang, Peng

2013-01-01T23:59:59.000Z

426

Water gate array for current flow or tidal movement pneumatic harnessing system  

DOE Patents [OSTI]

The invention, which provides a system for harnessing power from current flow or tidal movement in a body of water, comprises first and second hydro-pneumatic chambers each having ingress and egress below the water surface near the river or ocean floor and water gates operative to open or seal the ports to the passage of water. In an exemplary embodiment, the gates are sychronized by shafts so that the ingress ports of each chamber are connected to the egress ports of each other chamber. Thus, one set of gates is closed, while the other is open, thereby allowing water to flow into one chamber and build air pressure therein and allowing water to flow out of the other chamber and create a partial vacuum therein. A pipe connects the chambers, and an air turbine harnesses the air movement within the pipe. When water levels are equilibrated, the open set of gates is closed by a counterweight, and the other set is allowed to open by natural force of the water differential. The water gates may be comprised of a plurality of louvers which are ganged for simultaneous opening and closing. The system is designed to operate with air turbines or other pneumatic devices. Its design minimizes construction cost and environmental impact, yet provides a clean renewable energy source.

Gorlov, Alexander M. (Brookline, MA)

1991-01-01T23:59:59.000Z

427

Waste Isolation Pilot Plant 2001 Site Environmental Report  

SciTech Connect (OSTI)

The United States (U.S.) Department of Energy's (DOE) Carlsbad Field Office (CBFO) and Westinghouse TRU Solutions LLC (WTS) are dedicated to maintaining high quality management of Waste Isolation Pilot Plant (WIPP) environmental resources. DOE Order 5400.1, General Environmental Protection Program, and DOE Order 231.1, Environmental, Safety, and Health Reporting, require that the environment at and near DOE facilities be monitored to ensure the safety and health of the public and the environment. This Waste Isolation Pilot Plant 2001 Site Environmental Report summarizes environmental data from calendar year (CY) 2001 that characterize environmental management performance and demonstrate compliance with federal and state regulations. This report was prepared in accordance with DOE Order 5400.1, DOE Order 231.1, the Environmental Regulatory Guide for Radiological Effluent Monitoring and Environmental Surveillance (DOE/EH- 0173T), and the Waste Isolation Pilot Plant Environmental Protection Implementation Plan (DOE/WIPP 96-2199). The above Orders and guidance documents require that DOE facilities submit an annual site environmental report to DOE Headquarters, Office of the Assistant Secretary for Environment, Safety, and Health; and the New Mexico Environment Department (NMED). The purpose of this report is to provide a comprehensive description of operational environmental monitoring activities, to provide an abstract of environmental activities conducted to characterize site environmental management performance to confirm compliance with environmental standards and requirements, and to highlight significant programs and efforts of environmental merit at WIPP during CY 2001. WIPP received its first shipment of waste on March 26, 1999. In 2001, no evidence was found of any adverse effects from WIPP on the surrounding environment.

Westinghouse TRU Solutions, Inc.

2002-09-20T23:59:59.000Z

428

Waste Isolation Pilot Plant 1999 Site Environmental Report  

SciTech Connect (OSTI)

The U.S. Department of Energy?s (DOE)Carlsbad Area Office and the Westinghouse Waste Isolation Division (WID) are dedicated to maintaining high quality management of Waste Isolation Pilot Plant (WIPP) environmental resources. DOE Order 5400.1, General Environmental Protection Program, and DOE Order 231.1, Environmental, Safety, and Health Reporting, require that the environment at and near DOE facilities be monitored to ensure the safety and health of the public and the environment. This Waste Isolation Pilot Plant 1999 Site Environmental Report summarizes environmental data from calendar year 1999 that characterize environmental management performance and demonstrate compliance with federal and state regulations. This report was prepared in accordance with DOE Order 5400.1, DOE Order 231.1, the Environmental Regulatory Guide for Radiological Effluent Monitoring and Environmental Surveillance (DOE/EH- 0173T), and the Waste Isolation Pilot Plant Environmental Protection Implementation Plan (DOE/WIPP 96-2199). The above orders and guidance documents require that DOE facilities submit an Annual Site Environmental Report to DOE Headquarters, Office of the Assistant Secretary for Environment, Safety, and Health. The purpose of this report is to provide a comprehensive description of operational environmental monitoring activities, to provide an abstract of environmental activities conducted to characterize site environmental management performance to confirm compliance with environmental standards and requirements, and to highlight significant programs and efforts of environmental merit at WIPP during calendar year 1999. WIPP received its first shipment of waste on March 26, 1999. In 1999, no evidence was found of any adverse effects from WIPP on the surrounding environment. Radionuclide concentrations in the environment surrounding WIPP were not statistically higher in 1999 than in 1998.

Roy B. Evans, Ph.D.; Randall C. Morris, Ph.D.; Timothy D. Reynolds, Ph.D.; Ronald W. Warren; Westinghouse Waste Isolation Division

2000-09-30T23:59:59.000Z

429

Waste Isolation Pilot Plant CY 2000 Site Environmental Report  

SciTech Connect (OSTI)

The U.S. Department of Energy's (DOE) Carlsbad Field Office and Westinghouse TRU Solutions, LLC (WTS) are dedicated to maintaining high quality management of Waste Isolation Pilot Plant (WIPP) environmental resources. DOE Order 5400.1, General Environmental Protection Program, and DOE Order 231.1, Environmental, Safety, and Health Reporting, require that the environment at and near DOE facilities be monitored to ensure the safety and health of the public and the environment. This Waste Isolation Pilot Plant 2000 Site Environmental Report summarizes environmental data from calendar year (CY) 2000 that characterize environmental management performance and demonstrate compliance with federal and state regulations. This report was prepared in accordance with DOE Order 5400.1, DOE Order 231.1, the Environmental Regulatory Guide for Radiological Effluent Monitoring and Environmental Surveillance (DOE/EH-0173T), and the Waste Isolation Pilot Plant Environmental Protect ion Implementation Plan (DOE/WIPP 96-2199). The above orders and guidance documents require that DOE facilities submit an Annual Site Environmental Report to DOE Headquarters, Office of the Assistant Secretary for Environment, Safety, and Health. The purpose of this report is to provide a comprehensive description of operational environmental monitoring activities, to provide an abstract of environmental activities conducted to characterize site environmental management performance to confirm compliance with environmental standards and requirements, and to highlight significant programs and efforts of environmental merit at WIPP during CY 2000. The format of this report follows guidance offered in a June 1, 2001 memo from DOE's Office of Policy and Guidance with the subject ''Guidance for the preparation of Department of Energy (DOE) Annual Site Environmental Reports (ASERs) for Calendar Year 2000.'' WIPP received its first shipment of waste on March 26, 1999. In 2000, no evidence was found of any adverse effects from WIPP on the surrounding environment.

Westinghouse TRU Solutions, LLC; Environmental Science and Research Foundation, Inc.

2001-12-31T23:59:59.000Z

430

Pilot Demonstration of Phased Retrofits in Florida Homes (Fact Sheet)  

SciTech Connect (OSTI)

The Florida Solar Energy Center (FSEC) and Florida Power and Light are pursuing a collaborative energy research/utility partnership to retrofit a large number of homes using a phased approach. The project is creating detailed data on the energy and economic performance of two levels of home retrofit - simple and deep. Acting as a pilot, this project is expected to provide the information necessary to significantly reduce energy use through much larger community-scale projects in collaboration with utilities, program administrators and other market leader stakeholders.

Not Available

2014-08-01T23:59:59.000Z

431

Operating Experience of the 20-MW AFBC Pilot Plant  

E-Print Network [OSTI]

of recycle ratio. Tests at the Pilot Plant have shown that increasing the recycle ratio above 2.5 to 3.0 will only provide minimal improvement in carbon burnup. Potential improvement in combustion efficiency will come from increasing the size... of the ceramic material. By extending the ceramic beyond the end of the bend will further protect the feed line. Another method tested to prevent feed line erosion was the use of two 45 0 blind laterals. The blind leg of the lateral allows feed material...

Stephens, E. A. Jr.

432

Hydrologic studies for the Waste Isolation Pilot Plant  

SciTech Connect (OSTI)

The objective of this paper is to provide a general overview of hydrologic conditions at the Waste Isolation Pilot Plant (WIPP) by describing several key hydrologic studies that have been carried out as part of the site characterization program over the last 20 years. The paper is composed of three parts: background information about general objectives of the WIPP project; information about the geologic and hydrologic setting of the facility; and information about three aspects of the hydrologic system that are important to understanding the long-term performance of the WIPP facility. For additional detailed information, the reader is referred to the references cited in the text.

Davies, P.B.

1994-07-01T23:59:59.000Z

433

Waste Isolation Pilot Plant Annual Site Environmental Report for 2012  

SciTech Connect (OSTI)

The purpose of the Waste Isolation Pilot Plant (WIPP) Annual Site Environmental Report for 2012 (ASER) is to provide information required by U.S. Department of Energy (DOE) Order 231.1B, Environment, Safety, and Health Reporting. Specifically, the ASER presents summary environmental data to: Characterize site environmental management performance; Summarize environmental occurrences and responses reported during the calendar year; Confirm compliance with environmental standards and requirements; Highlight significant environmental accomplishments, including progress toward the DOE Environmental Sustainability Goals made through implementation of the WIPP Environmental Management System (EMS).

None

2013-09-01T23:59:59.000Z

434

Waste Isolation Pilot Plant Biennial Environmental Compliance Report  

SciTech Connect (OSTI)

This Biennial Environmental Compliance Report (BECR) documents environmental regulatory compliance at the Waste Isolation Pilot Plant (WIPP), a facility designed and authorized for the safe disposal of transuranic (TRU) radioactive waste, for the reporting period of April 1, 2002, to March 31, 2004. As required by the WIPP Land Withdrawal Act (LWA) (Public Law [Pub. L.] 102-579, as amended by Pub. L. 104-201), the BECR documents U.S. Department of Energy (DOE) compliance with applicable environmental protection laws and regulations implemented by agencies of the federal government and the state of New Mexico.

Washington Regulatory and Environmental Services (WRES)

2004-10-25T23:59:59.000Z

435

The waste isolation pilot plant regulatory compliance program  

SciTech Connect (OSTI)

The passage of the WIPP Land Withdrawal Act of 1992 (LWA) marked a turning point for the Waste Isolation Pilot Plant (WIPP) program. It established a Congressional mandate to open the WIPP in as short a time as possible, thereby initiating the process of addressing this nation`s transuranic (TRU) waste problem. The DOE responded to the LWA by shifting the priority at the WIPP from scientific investigations to regulatory compliance and the completion of prerequisites for the initiation of operations. Regulatory compliance activities have taken four main focuses: (1) preparing regulatory submittals; (2) aggressive schedules; (3) regulator interface; and (4) public interactions

Mewhinney, J.A. [U.S. Dept. of Energy, Carlsbad, NM (United States); Kehrman, R.F. [Westinghouse Electric Corp., Carlsbad, NM (United States)

1996-06-01T23:59:59.000Z

436

Cathy Zoi on the new Home Energy Score pilot program  

ScienceCinema (OSTI)

Acting Under Secretary Cathy Zoi talks about the new Home Energy Score pilot program that was announced today by Vice President Biden and U.S. Department of Energy Secretary Steven Chu. The Home Energy Score will offer homeowners straightforward, reliable information about their homes' energy efficiency. A report provides consumers with a home energy score between 1 and 10, and shows them how their home compares to others in their region. The report also includes customized, cost-effective recommendations that will help to reduce their energy costs and improve the comfort of their homes.

Zoi, Cathy

2013-05-29T23:59:59.000Z

437

High Temperature Calcination - MACT Upgrade Equipment Pilot Plant Test  

SciTech Connect (OSTI)

About one million gallons of acidic, hazardous, and radioactive sodium-bearing waste are stored in stainless steel tanks at the Idaho Nuclear Technology and Engineering Center (INTEC), which is a major operating facility of the Idaho National Engineering and Environmental Laboratory. Calcination at high-temperature conditions (600 C, with alumina nitrate and calcium nitrate chemical addition to the feed) is one of four options currently being considered by the Department of Energy for treatment of the remaining tank wastes. If calcination is selected for future processing of the sodium-bearing waste, it will be necessary to install new off-gas control equipment in the New Waste Calcining Facility (NWCF) to comply with the Maximum Achievable Control Technology (MACT) standards for hazardous waste combustors and incinerators. This will require, as a minimum, installing a carbon bed to reduce mercury emissions from their current level of up to 7,500 to <45 {micro}g/dscm, and a staged combustor to reduce unburned kerosene fuel in the off-gas discharge to <100 ppm CO and <10 ppm hydrocarbons. The staged combustor will also reduce NOx concentrations of about 35,000 ppm by 90-95%. A pilot-plant calcination test was completed in a newly constructed 15-cm diameter calciner vessel. The pilot-plant facility was equipped with a prototype MACT off-gas control system, including a highly efficient cyclone separator and off-gas quench/venturi scrubber for particulate removal, a staged combustor for unburned hydrocarbon and NOx destruction, and a packed activated carbon bed for mercury removal and residual chloride capture. Pilot-plant testing was performed during a 50-hour system operability test January 14-16, followed by a 100-hour high-temperature calcination pilot-plant calcination run January 19-23. Two flowsheet blends were tested: a 50-hour test with an aluminum-to-alkali metal molar ratio (AAR) of 2.25, and a 50-hour test with an AAR of 1.75. Results of the testing indicate that sodium-bearing waste can be successfully calcined at 600 C with an AAR of 1.75. Unburned hydrocarbons are reduced to less than 10 ppm (7% O2, dry basis), with >90% reduction of NOx emissions. Mercury removal by the carbon bed reached 99.99%, surpassing the control efficiency needed to meet MACT emissions standards. No deleterious impacts on the carbon bed were observed during the tests. The test results imply that upgrading the NWCF calciner with a more efficient cyclone separator and the proposed MACT equipment can process the remaining tanks wastes in 3 years or less, and comply with the MACT standards.

Richard D. Boardman; B. H. O'Brien; N. R. Soelberg; S. O. Bates; R. A. Wood; C. St. Michel

2004-02-01T23:59:59.000Z

438

EA-383 Pilot Power Group Inc. | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in Review: TopEnergy DOEDealingVehicle1 Closing American Electric0-A2 GDF Suez3 Pilot

439

Texas Propane Fleet Pilot Program | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy Usage »of Energy StrainClientDesignOffice -TemplateDavidDepartment ofFleet Pilot

440

Texas Propane Vehicle Pilot Project | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy Usage »of Energy StrainClientDesignOffice -TemplateDavidDepartment ofFleet Pilot2

Note: This page contains sample records for the topic "inlet pilot tidal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

ARM - Field Campaign - The ARM Pilot Radiation Observation Experiment  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth (AOD) by Microtops Atmospheric Optical DepthgovCampaignsSpring(PROBE) govCampaignsThe ARM Pilot

442

Smart Metering Pilot Program Inc SMPPI | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ < RAPID Jump to:Seadov Pty Ltd Jump to: navigation,PvtSouth Dakota)Slovenia: EnergyFeatures >Pilot

443

Carbon Fiber Pilot Plant and Research Facilities | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up fromDepartmentTie Ltd:June 20154:04-21-2014 (866) 448 - DEPOMeetingIndustries byPilot

444

NREL: Biomass Research - Thermochemical Pilot and Users Facility  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the Contributions and Achievements of Women |hitsAwardsPublicationsConversionPilot and

445

UOP Pilot-Scale Biorefinery | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy Usage »of EnergyTheTwo New Energyof Energy8, UNITED DEPARTMENTUOP Pilot-Scale

446

Design considerations for a steam-injection pilot with in-situ foaming  

SciTech Connect (OSTI)

This report reviews the necessary aspects of the planning, operation, evaluation, environmental impact and cost to implement a field pilot of steam injection with in-situ foaming. The Stanford University Petroleum Research Institute (SUPRI) is planning to implement such a pilot in Kern County, California. The cost of the pilot will be shared by the US Department of Energy and an oil company. Some important aspects of drilling and completion programs and their specifications, permits from regulatory bodies, and downhole tools to improve steam stimulation are discussed. The essential surface facilities which include water treatment plant, steam generator, demulsifier and dehydrator are considered. The necessary laboratory research in support of the pilot has been recommended. The formation evaluation and reservoir engineering effort for the pilot has been divided into three phases: reservoir definition, reservoir monitoring and post-pilot study. Appropriate techniques applicable to each phase of the test have been discussed. The environmental impact regulations as related to the steam injection process have been considered. In particular, the environmental problems associated with the burning of crude oil and desulfurization of flue gas have been discussed. Other environmental considerations such as solid and liquid waste disposal, health and safety are also discussed. An estimate of the cost of this field test is presented. Three scenarii (for pilots with high, medium, and low investment potentials, respectively) are presented. Since this report was prepared, a specific site for the supri pilot has been chosen. Appendices G and H present the details on this site.

Siddiqui, M.H.; Sanyal, S.K.; Horn, A.J.

1982-08-01T23:59:59.000Z

447

A pilot study of children's exposure to CCA-treated wood from playground equipment  

E-Print Network [OSTI]

A pilot study of children's exposure to CCA-treated wood from playground equipment S.L. Shalat Arsenic from chromated copper arsenate (CCA)-treated wood, widely used in playgrounds and other outdoor associated with children playing on CCA- treated playgrounds. In a Pilot Study, 11 children (13­71 months

Florida, University of

448

A pilot study of children's exposure to CCA-treated wood from playground equipment  

E-Print Network [OSTI]

A pilot study of children's exposure to CCA-treated wood from playground equipment S.L. Shalat online 17 February 2006 Abstract Arsenic from chromated copper arsenate (CCA)-treated wood, widely used possible health risks associated with children playing on CCA- treated playgrounds. In a Pilot Study, 11

Florida, University of

449

What is the Value of Joint Processing of Pilots and Data in Block-Fading Channels?  

E-Print Network [OSTI]

What is the Value of Joint Processing of Pilots and Data in Block-Fading Channels? Nihar Jindal with joint processing of pilot and data symbol observations is com- pared with that achievable through, and subsequently detecting the data symbols. Studied on the basis of a mutual information lower bound, joint

Lozano, Angel

450

Pilot plant for CO2 capture with aqueous piperazine/potassium carbonate , Gary T. Rochelle1  

E-Print Network [OSTI]

GHGT-8 1 Pilot plant for CO2 capture with aqueous piperazine/potassium carbonate Eric Chen1 , Gary pilot for CO2 capture was successfully operated using potassium carbonate promoted with piperazine, potassium carbonate, piperazine Introduction Several amine-promoted potassium carbonate solvents have been

Rochelle, Gary T.

451

HANFORD MEDIUM-LOW CURIE WASTE PRETREATMENT ALTERNATIVES PROJECT FRACTIONAL CRYSTALLIZATION PILOT SCALE TESTING FINAL REPORT  

SciTech Connect (OSTI)

The Fractional Crystallization Pilot Plant was designed and constructed to demonstrate that fractional crystallization is a viable way to separate the high-level and low-activity radioactive waste streams from retrieved Hanford single-shell tank saltcake. The focus of this report is to review the design, construction, and testing details of the fractional crystallization pilot plant not previously disseminated.

HERTING DL

2008-09-16T23:59:59.000Z

452

Effects of Modes of Cockpit Automation on Pilot Performance and Workload in a Next Generation  

E-Print Network [OSTI]

Effects of Modes of Cockpit Automation on Pilot Performance and Workload in a Next Generation of advanced cockpit automation for flight planning on pilot performance and workload under a futuristic arrivals to an airport using three modes of automation (MOAs), including a control-display unit (CDU

Kaber, David B.

453

Self-Optimization of Antenna Tilt and Pilot Power for Dedicated Channels  

E-Print Network [OSTI]

Self-Optimization of Antenna Tilt and Pilot Power for Dedicated Channels Abstract-- In Radio Access Networks (RAN), fixed configurations result in poor network efficiency. This sub- optimal performance present a framework for a self-optimizing RAN, which adapts Antenna Tilt and Pilot Power according

Paris-Sud XI, Université de

454

Sustainable Tourism Indicators: Pilot Estimation for the Municipality of Hersonissos, Crete.  

E-Print Network [OSTI]

Sustainable Tourism Indicators: Pilot Estimation for the Municipality of Hersonissos, Crete. Yianna@iacm.forth.gr Abstract The topic of the present research is the pilot estimation of sustainable tourism indicators of economic activity. In tourism, the concept of sustainability has been initially established as a notion

Zaferatos, Nicholas C.

455

Institute for Renewable Energy Ltd Preparation of a pilot biogas CHP plant integrated with  

E-Print Network [OSTI]

Institute for Renewable Energy Ltd Poland 1 Preparation of a pilot biogas CHP plant integrated on the preparation phase for a pilot investment in Koczala, Northern Poland, relating to an agricultural biogas CHP production and utilisation of agricultural biogas the project focused on BAT obtainable from various European

456

NIEHS CENTER FOR ENVIRONMENTAL HEALTH IN NORTHERN MANHATTAN ANNOUNCEMENT for PILOT PROJECT GRANTS  

E-Print Network [OSTI]

NIEHS CENTER FOR ENVIRONMENTAL HEALTH IN NORTHERN MANHATTAN ANNOUNCEMENT for PILOT PROJECT GRANTS for Environmental Health is seeking innovative and promising pilot projects in all areas of environmental health on the thematic goals of the Center, namely, air pollution, oxidative damage, epigenetics and genetic

Grishok, Alla

457

NIEHS CENTER FOR ENVIRONMENTAL HEALTH IN NORTHERN MANHATTAN ANNOUNCEMENT for PILOT PROJECT GRANTS  

E-Print Network [OSTI]

NIEHS CENTER FOR ENVIRONMENTAL HEALTH IN NORTHERN MANHATTAN ANNOUNCEMENT for PILOT PROJECT GRANTS for Environmental Health is seeking innovative and promising pilot projects in all areas of environmental health on the thematic goals of the Center, namely, air pollution, oxidative damage, epigenetics, genetic susceptibility

Qian, Ning

458

Sampling and Analysis Instruction for Installation of UPR-100-N-17 Bioremediation Wells and Performance of Bioventing Pilot Tests  

SciTech Connect (OSTI)

Sampling and analytical requirements for in situ bioremediation pilot study for remediation of vadose zone petroleum hydrocarbon contamination.

W. S. Thompson

2008-12-30T23:59:59.000Z

459

CONSTRAINTS ON THE LIFETIMES OF DISKS RESULTING FROM TIDALLY DESTROYED ROCKY PLANETARY BODIES  

SciTech Connect (OSTI)

Spitzer IRAC observations of 15 metal-polluted white dwarfs reveal infrared excesses in the spectral energy distributions of HE 0110-5630, GD 61, and HE 1349-2305. All three of these stars have helium-dominated atmospheres, and their infrared emissions are consistent with warm dust produced by the tidal destruction of (minor) planetary bodies. This study brings the number of metal-polluted, helium and hydrogen atmosphere white dwarfs surveyed with IRAC to 53 and 38, respectively. It also nearly doubles the number of metal-polluted helium-rich white dwarfs found to have closely orbiting dust by Spitzer. From the increased statistics for both atmospheric types with circumstellar dust, we derive a typical disk lifetime of log [t{sub disk}(yr)] = 5.6 {+-} 1.1 (ranging from 3 Multiplication-Sign 10{sup 4} to 5 Multiplication-Sign 10{sup 6} yr). This assumes a relatively constant rate of accretion over the timescale where dust persists, which is uncertain. We find that the fraction of highly metal-polluted helium-rich white dwarfs that have an infrared excess detected by Spitzer is only 23%, compared to 48% for metal-polluted hydrogen-rich white dwarfs, and we conclude from this difference that the typical lifetime of dusty disks is somewhat shorter than the diffusion timescales of helium-rich white dwarf. We also find evidence for higher time-averaged accretion rates onto helium-rich stars compared to the instantaneous accretion rates onto hydrogen-rich stars; this is an indication that our picture of evolved star-planetary system interactions is incomplete. We discuss some speculative scenarios that can explain the observations.

Girven, J.; Gaensicke, B. T.; Marsh, T. R. [Department of Physics, University of Warwick, Coventry CV4 7AL (United Kingdom); Brinkworth, C. S.; Hoard, D. W. [Spitzer Science Center, California Institute of Technology, Pasadena, CA 91125 (United States); Farihi, J. [Department of Physics and Astronomy, University of Leicester, Leicester LE1 7RH (United Kingdom); Koester, D., E-mail: j.m.girven@warwick.ac.uk [Institut fuer Theoretische Physik und Astrophysik, University of Kiel, 24098 Kiel (Germany)

2012-04-20T23:59:59.000Z

460

Shrinking binary and planetary orbits by Kozai cycles with tidal friction  

E-Print Network [OSTI]

At least two arguments suggest that the orbits of a large fraction of binary stars and extrasolar planets shrank by 1-2 orders of magnitude after formation: (i) the physical radius of a star shrinks by a large factor from birth to the main sequence, yet many main-sequence stars have companions orbiting only a few stellar radii away, and (ii) in current theories of planet formation, the region within ~0.1 AU of a protostar is too hot and rarefied for a Jupiter-mass planet to form, yet many "hot Jupiters" are observed at such distances. We investigate orbital shrinkage by the combined effects of secular perturbations from a distant companion star (Kozai oscillations) and tidal friction. We integrate the relevant equations of motion to predict the distribution of orbital elements produced by this process. Binary stars with orbital periods of 0.1 to 10 days, with a median of ~2 d, are produced from binaries with much longer periods (10 d to 10^5 d), consistent with observations indicating that most or all short-period binaries have distant companions (tertiaries). We also make two new testable predictions: (1) For periods between 3 and 10 d, the distribution of the mutual inclination between the inner binary and the tertiary orbit should peak strongly near 40 deg and 140 deg. (2) Extrasolar planets whose host stars have a distant binary companion may also undergo this process, in which case the orbit of the resulting hot Jupiter will typically be misaligned with the equator of its host star.

Daniel Fabrycky; Scott Tremaine

2007-05-30T23:59:59.000Z

Note: This page contains sample records for the topic "inlet pilot tidal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Pilot plant used to develop load and pressure controller  

SciTech Connect (OSTI)

Viewed from the perspective of the power-generation mixture in Japan, nuclear power plants will continue to be operated to meet the base load. Meanwhile, integrated coal gasification combined cycle (IGCC) power plants will be required to serve as thermal power plants to cover the middle load, as is the case with conventional thermal power plants. In terms of operational performance, therefore, IGCC power plants will need to have a capability of following a wide range of load demand at high speed. For this purpose, a load and pressure controller was developed and tested during the operational research on a 200 tons/day entrained flow IGCC pilot plant at the Nakoso Power Station by the Engineering Research Association for IGCC Power Systems (IGC Association). This article reports on the development of the load and pressure controller and the results of the control test carried out to check the load follow capability of the pilot plant, while touching upon the simulation study also being conducted.

Nagata, Kazue; Yamada, Toshihiro; Hiza, Tomoyuki

1997-02-01T23:59:59.000Z

462

Pilot study dismantlement of 20 lead-lined shipping casks  

SciTech Connect (OSTI)

This report describes a pilot study conducted at the INEL to dismantle lead-lined casks and shielding devices, separate the radiologically contaminated and hazardous materials, and recycle resultant scrap lead. The facility areas where the work was performed, dismantlement methods, and process equipment are described. Issues and results associated with recycling the lead as a free-released scrap metal are presented and discussed. Data and results from the pilot study are summarized and presented. The study concluded that cask dismantlement at the INEL can be performed as a legitimate recycling activity for scrap lead. Ninety-one percent of the lead recovered passed free-release criteria. The value of the 50,375 lb of recovered lead is approximately $0.45/lb. Resultant waste streams can be satisfactorily treated and disposed. Only very low levels of bulk radiological contamination (47 picocuries/gram of 137 Cs and 3.2 picocuries/gram of {sup 6O}Co) were detected in the lead rejected for free release.

Thurmond, S.M.

1995-08-01T23:59:59.000Z

463

Indian Point 2 pilot program: NUREG-1465 source term  

SciTech Connect (OSTI)

NUREG-1465, {open_quotes}Accident Source Terms for Light-Water Nuclear Power Plants{close_quotes} provides a postulated fission product source term that is based on current understanding of light water reactor (LWR) accidents and fission product behavior. Reference 1 is applicable to LWR designs and is intended to form the basis for the development of regulatory guidance. Following publication of NUREG-1465 in early 1995, the U.S. Nuclear Regulatory Commission (NRC) approached the nuclear industry for recommendations on the future use of the NUREG for application to existing LWRs. The result was the formation of an industry group through the Nuclear Energy Institute and the selection of several nuclear power plants to serve as pilot plants for the analysis and proposed applications of the NUREG. Con Edison offered Indian Point unit 2 as a pilot plant. Calculations were performed by Westinghouse and submitted to the NRC to utilize the results in support of plant changes. At this time, the NRC review is ongoing.

Jackson, C.W. [Consolidated Edison Co., Buchanan, NY (United States)

1997-12-01T23:59:59.000Z

464

Waste Isolation Pilot Plant Site Environmental Report Calendar Year 2002  

SciTech Connect (OSTI)

The United States (U.S.) Department of Energy (DOE) Carlsbad Field Office (CBFO) and Washington TRU Solutions LLC (WTS) are dedicated to maintaining high quality management of Waste Isolation Pilot Plant (WIPP) environmental resources. DOE Order 5400.1, General Environmental Protection Program, and DOE Order 231.1, Environment, Safety, and Health Reporting, require that the environment at and near DOE facilities be monitored to ensure the safety and health of the public and the environment. This Waste Isolation Pilot Plant 2002 Site Environmental Report summarizes environmental data from calendar year 2002 that characterize environmental management performance and demonstrate compliance with federal and state regulations. This report was prepared in accordance with DOE Order 5400.1, DOE Order 231.1, and Guidance for the Preparation of DOE Annual Site Environmental Reports (ASERs) for Calendar Year 2002 (DOE Memorandum EH-41: Natoli:6-1336, April 4, 2003). These Orders and the guidance document require that DOE facilities submit an annual site environmental report to DOE Headquarters, Office of the Assistant Secretary for Environment, Safety, and Health; and the New Mexico Environment Department (NMED).

Washington Regulatory and Environmental Services

2003-09-17T23:59:59.000Z

465

DA WHITE DWARFS OBSERVED IN THE LAMOST PILOT SURVEY  

SciTech Connect (OSTI)

A total of {approx}640, 000 objects from the LAMOST pilot survey have been publicly released. In this work, we present a catalog of DA white dwarfs (DAWDs) from the entire pilot survey. We outline a new algorithm for the selection of white dwarfs (WDs) by fitting Sersic profiles to the Balmer H{beta}, H{gamma}, and H{delta} lines of the spectra, and calculating the equivalent width of the Ca II K line. Two thousand nine hundred sixty-four candidates are selected by constraining the fitting parameters and the equivalent width of the Ca II K line. All the spectra of candidates are visually inspected. We identify 230 DAWDs (59 of which are already included in the Villanova and SDSS WD catalogs), 20 of which are DAWDs with non-degenerate companions. In addition, 128 candidates are classified as DAWDs/subdwarfs, which means the classifications are ambiguous. The result is consistent with the expected DAWD number estimated based on the LEGUE target selection algorithm.

Zhang Yueyang; Deng Licai; Liu Chao; Carrell, Kenneth; Yang Fan; Gao Shuang; Xu Yan; Li Jing; Zhang Haotong; Zhao Yongheng; Luo Ali; Bai Zhongrui; Yuan Hailong [Key Lab for Optical Astronomy, National Astronomical Observatories, Chinese Academy of Sciences, Beijing 100012 (China); Lepine, Sebastien [Department of Astrophysics, Division of Physical Sciences, American Museum of Natural History, Central Park West at 79th Street, New York, NY (United States); Newberg, Heidi Jo; Carlin, Jeffrey L. [Department of Physics, Applied Physics and Astronomy, Rensselaer Polytechnic Institute, 110 8th Street, Troy, NY 12180 (United States); Jin Ge [University of Science and Technology of China, Hefei 230026 (China)

2013-08-01T23:59:59.000Z

466

Arizona Public Service - Alternative Fuel (Hydrogen) Pilot Plant Design Report  

SciTech Connect (OSTI)

Hydrogen has promise to be the fuel of the future. Its use as a chemical reagent and as a rocket propellant has grown to over eight million metric tons per year in the United States. Although use of hydrogen is abundant, it has not been used extensively as a transportation fuel. To assess the viability of hydrogen as a transportation fuel and the viability of producing hydrogen using off-peak electric energy, Pinnacle West Capital Corporation (PNW) and its electric utility subsidiary, Arizona Public Service (APS) designed, constructed, and operates a hydrogen and compressed natural gas fueling station—the APS Alternative Fuel Pilot Plant. This report summarizes the design of the APS Alternative Fuel Pilot Plant and presents lessons learned from its design and construction. Electric Transportation Applications prepared this report under contract to the U.S. Department of Energy’s Advanced Vehicle Testing Activity. The Idaho National Engineering and Environmental Laboratory manages these activities for the Advanced Vehicle Testing Activity.

James E. Francfort

2003-12-01T23:59:59.000Z

467

The Effect of Tidal Inflation Instability on the Mass and Dynamical Evolution of Extrasolar Planets with Ultra-Short Periods  

E-Print Network [OSTI]

We investigate the possibility of substantial inflation of short-period Jupiter-mass planets, as a result of their internal tidal dissipation associated with the synchronization and circularization of their orbits. We employ the simplest prescription based on an equilibrium model with a constant lag angle for all components of the tide. We show that for young Jupiter-mass planets, with a period less than 3 days, an initial radius about 2 Jupiter radii, and an orbital eccentricity greater than 0.2, the energy dissipated during the circularization of their orbits is sufficiently intense and protracted to inflate their sizes up to their Roche radii.

Pin-Gao Gu; Doug Lin; Peter Bodenheimer

2003-03-17T23:59:59.000Z

468

Tidal Waves -- a non-adiabatic microscopic description of the yrast states in near-spherical nuclei  

E-Print Network [OSTI]

The yrast states of nuclei that are spherical or weakly deformed in their ground states are described as quadrupole waves running over the nuclear surface, which we call "tidal waves". The energies and E2 transition probabilities of the yrast states in nuclides with $Z$= 44, 46, 48 and $N=56, ~58,..., 66$ are calculated by means of the cranking model in a microscopic way. The nonlinear response of the nucleonic orbitals results in a strong coupling between shape and single particle degrees of freedom.

S. Frauendorf; Y. Gu; J. Sun

2011-09-08T23:59:59.000Z

469

Waste Isolation Pilot Plant Groundwater Protection Management Program Plan  

SciTech Connect (OSTI)

U.S. Department of Energy (DOE) Order 5400.1, General Environmental Protection Program, requires each DOE site to prepare a Groundwater Protection Management Program Plan. This document fulfills the requirement for the Waste Isolation Pilot Plant (WIPP). This document was prepared by the Hydrology Section of the Westinghouse TRU Solutions LLC (WTS) Environmental Compliance Department, and it is the responsibility of this group to review the plan annually and update it every three years. This document is not, nor is it intended to be, an implementing document that sets forth specific details on carrying out field projects or operational policy. Rather, it is intended to give the reader insight to the groundwater protection philosophy at WIPP.

Washington TRU Solutions

2002-09-24T23:59:59.000Z

470

Bentonite as a waste isolation pilot plant shaft sealing material  

SciTech Connect (OSTI)

Current designs of the shaft sealing system for the Waste Isolation Pilot Plant (WIPP) propose using bentonite as a primary sealing component. The shaft sealing designs anticipate that compacted bentonite sealing components can perform through the 10,000-year regulatory period and beyond. To evaluate the acceptability of bentonite as a sealing material for the WIPP, this report identifies references that deal with the properties and characteristics of bentonite that may affect its behavior in the WIPP environment. This report reviews published studies that discuss using bentonite as sealing material for nuclear waste disposal, environmental restoration, toxic and chemical waste disposal, landfill liners, and applications in the petroleum industry. This report identifies the physical and chemical properties, stability and seal construction technologies of bentonite seals in shafts, especially in a saline brine environment. This report focuses on permeability, swelling pressure, strength, stiffness, longevity, and densification properties of bentonites.

Daemen, J.; Ran, Chongwei [Univ. of Nevada, Reno, NV (United States)

1996-12-01T23:59:59.000Z

471

Weatherization Innovation Pilot Program (WIPP): Technical Assistance Summary  

SciTech Connect (OSTI)

The U.S. Department of Energy (DOE) Energy Efficiency and Renewable Energy (EERE) Weatherization and Intergovernmental Programs Office (WIPO) launched the Weatherization Innovation Pilot Program (WIPP) to accelerate innovations in whole-house weatherization and advance DOE's goal of increasing the energy efficiency and health and safety of low-income residences without the utilization of additional taxpayer funding. Sixteen WIPP grantees were awarded a total of $30 million in Weatherization Assistance Program (WAP) funds in September 2010. These projects focused on: including nontraditional partners in weatherization service delivery; leveraging significant non-federal funding; and improving the effectiveness of low-income weatherization through the use of new materials, technologies, behavior-change models, and processes.

Hollander, A.

2014-09-01T23:59:59.000Z

472

Waste Isolation Pilot Plant Groundwater Protection Management Program Plan  

SciTech Connect (OSTI)

The DOE has mandated in DOE Order 5400.1 that its operations will be conducted in an environmentally safe manner. The Waste Isolation Pilot Plant (WIPP) will comply with DOE Order 5400.1 and will conduct its operations in a manner that ensures the safety of the environment and the public. This document outlines how the WIPP will protect and preserve groundwater within and surrounding the WIPP facility. Groundwater protection is just one aspect of the WIPP environmental protection effort. The WIPP groundwater surveillance program is designed to determine statistically if any changes are occurring in groundwater characteristics within and surrounding the WIPP facility. If a change is noted, the cause will be determined and appropriate corrective action initiated.

Not Available

1993-12-31T23:59:59.000Z

473

Final environmental impact statement. Waste Isolation Pilot Plant  

SciTech Connect (OSTI)

This volume contains the appendices for the Final Environmental Impact Statement for the Waste Isolation Pilot Plant (WIPP). Alternative geologic environs are considered. Salt, crystalline rock, argillaceous rock, and tuff are discussed. Studies on alternate geologic regions for the siting of WIPP are reviewed. President Carter's message to Congress on the management of radioactive wastes and the findings and recommendations of the interagency review group on nuclear waste management are included. Selection criteria for the WIPP site including geologic, hydrologic, tectonic, physicochemical compatability, and socio-economic factors are presented. A description of the waste types and the waste processing procedures are given. Methods used to calculate radiation doses from radionuclide releases during operation are presented. A complete description of the Los Medanos site, including archaeological and historic aspects is included. Environmental monitoring programs and long-term safety analysis program are described. (DMC)

Not Available

1980-10-01T23:59:59.000Z

474

70 DA WHITE DWARFS IDENTIFIED IN LAMOST PILOT SURVEY  

SciTech Connect (OSTI)

We present a spectroscopically identified catalog of 70 DA white dwarfs (WDs) from the LAMOST pilot survey. Thirty-five are found to be new identifications after cross-correlation with the Eisenstein et al. and Villanova catalogs. The effective temperature and gravity of these WDs are estimated by Balmer lines fitting. Most of them are hot WDs. The cooling times and masses of these WDs are estimated by interpolation in theoretical evolution tracks. The peak of the mass distribution is found to be {approx}0.6 M {sub Sun }, which is consistent with prior work in the literature. The distances of these WDs are estimated using the method of synthetic spectral distances. All of these WDs are found to be in the Galactic disk from our analysis of space motions. Our sample supports the expectation that WDs with high mass are concentrated near the plane of the Galactic disk.

Zhao, J. K.; Luo, A. L.; Zhao, G. [Key Laboratory of Optical Astronomy, National Astronomical Observatories, Chinese Academy of Sciences, Beijing 100012 (China); Oswalt, T. D., E-mail: zjk@bao.ac.cn, E-mail: gzhao@bao.ac.cn, E-mail: lal@bao.ac.cn, E-mail: toswalt@fit.edu [Physics and Space Science Department, Florida Institute of Technology, Melbourne, FL 32901 (United States)

2013-06-01T23:59:59.000Z

475

The Waste Isolation Pilot Plant: An International Center of Excellence  

SciTech Connect (OSTI)

The United States Department of Energy's Carlsbad Field Office (CBFO) is responsible for the successful management of transuranic radioactive waste (TRUW) in the United States. TRUW is a long-lived radioactive waste/material (LLRM). CBFO's responsibilities includes the operation of the Waste Isolation Pilot Plant (WIPP), which is a deep geologic repository for the safe disposal of U.S. defense-related TRUW and is located 42 kilometers (km) east of Carlsbad, New Mexico. WIPP is the only deep-geological disposal site for LLRM that is operating in the world today. CBFO also manages the National Transuranic Waste Program (NTP), which oversees TRU waste management from generation to disposal. As of February 2003, approximately 1500 shipments of waste have been safely transported to the WIPP, which has been operating since March 1999.

Matthews, Mark

2003-02-25T23:59:59.000Z

476

Waste Isolation Pilot Plant Biennial Environmental Compliance Report  

SciTech Connect (OSTI)

This Biennial Environmental Compliance Report (BECR) documents environmental regulatory compliance at the Waste Isolation Pilot Plant (WIPP), a facility designed for the safe disposal of transuranic (TRU) radioactive waste, for the reporting period of April 1, 1998, to March 31, 2000. As required by the WIPP Land Withdrawal Act (LWA)(Public Law [Pub. L.] 102-579, and amended by Pub. L. 104-201), the BECR documents U.S. Department of Energy (DOE) Carlsbad Area Office's (hereinafter the ''CAO'') compliance with applicable environmental protection laws and regulations implemented by agencies of the federal government and the state of New Mexico. An issue was identified in the 1998 BECR relating to a potential cross-connection between the fire-water systems and the site domestic water system. While the CAO and its managing and operating contractor (hereinafter the ''MOC'') believe the site was always in compliance with cross-connection control requirements, hardware and procedural upgrades w ere implemented in March 1999 to strengthen its compliance posture. Further discussion of this issue is presented in section 30.2.2 herein. During this reporting period WIPP received two letters and a compliance order alleging violation of certain requirements outlined in section 9(a)(1) of the LWA. With the exception of one item, pending a final decision by the New Mexico Environment Department (NMED), all alleged violations have been resolved without the assessment of fines or penalties. Non-mixed TRU waste shipments began on March 26, 1999. Shipments continued through November 26, 1999, the effective date of the Waste Isolation Pilot Plant Hazardous Waste Facility Permit (NM4890139088-TSDF). No shipments regulated under the Hazardous Waste Facility Permit were received at WIPP during this BECR reporting period.

Westinghouse TRU Solutions

2000-12-01T23:59:59.000Z

477

Mon. Not. R. Astron. Soc. 391, 237245 (2008) doi:10.1111/j.1365-2966.2008.13868.x Tidal heating of terrestrial extrasolar planets and implications for their  

E-Print Network [OSTI]

these issues, we model the tidal heating and evolution of hypothetical extrasolar terrestrial planets, Greenberg & Barnes 2008b). If such a planet is on an eccentric orbit, the dissipation of tidal energy within extrasolar planets are observed to be larger than theoretical modelling predicts (e.g. Bodenheimer, E

Barnes, Rory

478

Waste Isolation Pilot Plant No-migration variance petition. Addendum: Volume 7, Revision 1  

SciTech Connect (OSTI)

This report describes various aspects of the Waste Isolation Pilot Plant (WIPP) including design data, waste characterization, dissolution features, ground water hydrology, natural resources, monitoring, general geology, and the gas generation/test program.

Not Available

1990-03-01T23:59:59.000Z

479

DISCOM2: Distance Computing the SP2 Pilot FY98 Report  

SciTech Connect (OSTI)

As a way to bootstrap the DISCOM(2) Distance Computing Program the SP2 Pilot Project was launched in March 1998. The Pilot was directed towards creating an environment to allow Sandia users to run their applications on the Accelerated Strategic Computing Initiative's (ASCI) Blue Pacific computation platform, the unclassified IBM SP2 platform at Lawrence Livermore National Laboratory (LLNL). The DISCOM(2) Pilot leverages the ASCI PSE (Problem solving Environment) efforts in networking and services to baseline the performance of the current system. Efforts in the following areas of the pilot are documented: applications, services, networking, visualization, and the system model. It details not only the running of two Sandia codes CTH and COYOTE on the Blue Pacific platform, but also the buildong of the Sandia National Laboratories (SNL) proxy environment of the RS6000 platforms to support the Sandia users.

Beiriger, Judy; Byers, Rupert K.; Ernest, Martha J.; Goudy, Sue P.; Noe, John P.; Pratt, Thomas J.; Shirley, David N.; Tarman, Thomas D.; VanDevender, Walter H.; Wiltzius, David P.

1999-05-01T23:59:59.000Z

480

Texas AgriLife Research with General Atomics Pilots Microalgae Ponds in Pecos BIOENERGY PROGRAM  

E-Print Network [OSTI]

Texas AgriLife Research with General Atomics Pilots Microalgae Ponds in Pecos BIOENERGY PROGRAM on the tank bottom will be opened. The Continued on back #12;http://AgBioenergy.tamu.edu concentrated algae

Note: This page contains sample records for the topic "inlet pilot tidal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Deep Vadose Zone Treatability Test for the Hanford Central Plateau: Soil Desiccation Pilot Test Results  

SciTech Connect (OSTI)

This report describes results of a pilot test of soil desiccation conducted as part of the Deep Vadose Zone Treatability Test program. The report is written in CERCLA treatabilty test report format.

Truex, Michael J.; Oostrom, Martinus; Strickland, Christopher E.; Johnson, Timothy C.; Freedman, Vicky L.; Johnson, Christian D.; Greenwood, William J.; Ward, Anderson L.; Clayton, Ray E.; Lindberg, Michael J.; Peterson, John E.; Hubbard, Susan; Chronister, Glen B.; Benecke, Mark W.

2012-05-01T23:59:59.000Z

482

Extending safety assessment methods for remotely piloted aircraft operations in the national airspace system  

E-Print Network [OSTI]

Remotely Piloted Aircraft operations are growing rapidly in the United States specifically for the Department of Defense to achieve training needs. To ensure the safety of the National Airspace System is maintained to a ...

Horrell, Alexander C. (Alexander Chapman)

2012-01-01T23:59:59.000Z

483

Independent review of estimated load reductions for PJM's small customer load response pilot project  

E-Print Network [OSTI]

of Estimated Load Reductions for PJM’s Small Customer Loadof Estimated Load Reductions for PJM’s Small Customer LoadResponse Pilot Project Prepared for PJM Interconnection, LLC

Heffner, G.; Moezzi, M.; Goldman, C.

2004-01-01T23:59:59.000Z

484

Application to Export Electric Energy OE Docket No. EA-383 Pilot...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Inc.: Federal Register Notice Volume 77, No. 38 - Feb. 27, 2012 Application to Export Electric Energy OE Docket No. EA-383 Pilot Power Group, Inc.: Federal Register Notice Volume...

485

The MQ-9 Reaper remotely piloted aircraft : humans and machines in action  

E-Print Network [OSTI]

Remotely piloted aircraft and the people that control them are changing how the US military operates aircraft and those who fly, yet few know what "drone" operators actually do, why they do what they do, or how they shape ...

Cullen, Timothy M

2011-01-01T23:59:59.000Z

486

E-Print Network 3.0 - affect pilot plant Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Power S... is reported on a study to define a "pilot plant" to demonstrate the production of high grade heat in a fusion... " as commercial prototypes. In many technologies...

487

E-Print Network 3.0 - automatic pilot Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Power S... is reported on a study to define a "pilot plant" to demonstrate the production of high grade heat in a fusion... " as commercial prototypes. In many technologies...

488

Facing Racism at 30,000 Feet: African American Pilots, Flight Attendants, and Emotional Labor  

E-Print Network [OSTI]

In this qualitative study, I examine the experiences of African American pilots and flight attendants with emotional labor. Integral to existing theories of emotional labor is the incorporation of voices of color and their contemporary movement...

Evans, Louwanda

2012-07-16T23:59:59.000Z

489

Pilot Scale Study of Excess Sludge Production Reduction in Wastewater Treatment by Ozone  

E-Print Network [OSTI]

Pilot Scale Study of Excess Sludge Production Reduction in Wastewater Treatment by Ozone Yuan Ma-scale reactors were operated at the LaPrairie Wastewater Treatment plant (one control and one ozonated

Barthelat, Francois

490

Microsoft Word - CX-Redmond-PilotButte-WoodPoleFY12_WEB.doc  

Broader source: Energy.gov (indexed) [DOE]

3, 2012 REPLY TO ATTN OF: KEPR-4 SUBJECT: Environmental Clearance Memorandum Richard Heredia Project Manager - TEP-TPP-1 Proposed Action: Redmond-Pilot Butte No. 1 Wood Pole...

491

Microsoft Word - CX-PilotButte-LaPineWoodPoleFY12_WEB.docx  

Broader source: Energy.gov (indexed) [DOE]

0, 2012 REPLY TO ATTN OF: KEPR-4 SUBJECT: Environmental Clearance Memorandum Richard Heredia Project Manager - TEP-TPP-1 Proposed Action: Pilot Butte-La Pine No. 1 Wood Pole...

492

Physical and numerical modeling of the external fluid mechanics of OTEC pilot plants  

E-Print Network [OSTI]

This study examined the near field external fluid mechanics of symmetrical OTEC pilot plant designs (20-80 MWe) under realistic deep water conditions. The objective was to assess the environmental impact of different plant ...

Singarella, Paul N.

1982-01-01T23:59:59.000Z

493

A Cold Water Pipe for an OTEC Pilot Plant: Design Considerations  

E-Print Network [OSTI]

A Cold Water Pipe for an OTEC Pilot Plant: Design Considerations Kara Silver Abstract Ocean Thermal Energy Conversion (OTEC) is a baseload renewable technology for tropical countries and islands. In order

Frandsen, Jannette B.

494

glideinWMS - A generic pilot-based Workload Management System  

SciTech Connect (OSTI)

The Grid resources are distributed among hundreds of independent Grid sites, requiring a higher level Workload Management System (WMS) to be used efficiently. Pilot jobs have been used for this purpose by many communities, bringing increased reliability, global fair share and just in time resource matching. GlideinWMS is a WMS based on the Condor glidein concept, i.e. a regular Condor pool, with the Condor daemons (startds) being started by pilot jobs, and real jobs being vanilla, standard or MPI universe jobs. The glideinWMS is composed of a set of Glidein Factories, handling the submission of pilot jobs to a set of Grid sites, and a set of VO Frontends, requesting pilot submission based on the status of user jobs. This paper contains the structural overview of glideinWMS as well as a detailed description of the current implementation and the current scalability limits.

Sfiligoi, Igor; /Fermilab

2007-09-01T23:59:59.000Z

495

Head of EM Visits Waste Isolation Pilot Plant for First Underground...  

Office of Environmental Management (EM)

Secretary Mark Whitney today visited the Waste Isolation Pilot Plant (WIPP) near Carlsbad, N.M., where he became the first non-WIPP employee to tour the underground facility...

496

PanDA Pilot Submission using Condor-G: Experience and Improvements  

SciTech Connect (OSTI)

PanDA (Production and Distributed Analysis) is the workload management system of the ATLAS experiment, used to run managed production and user analysis jobs on the grid. As a late-binding, pilot-based system, the maintenance of a smooth and steady stream of pilot jobs to all grid sites is critical for PanDA operation. The ATLAS Computing Facility (ACF) at BNL, as the ATLAS Tier1 center in the US, operates the pilot submission systems for the US. This is done using the PanDA 'AutoPilot' scheduler component which submits pilot jobs via Condor-G, a grid job scheduling system developed at the University of Wisconsin-Madison. In this paper, we discuss the operation and performance of the Condor-G pilot submission at BNL, with emphasis on the challenges and issues encountered in the real grid production environment. With the close collaboration of Condor and PanDA teams, the scalability and stability of the overall system has been greatly improved over the last year. We review improvements made to Condor-G resulting from this collaboration, including isolation of site-based issues by running a separate Gridmanager for each remote site, introduction of the 'Nonessential' job attribute to allow Condor to optimize its behavior for the specific character of pilot jobs, better understanding and handling of the Gridmonitor process, as well as better scheduling in the PanDA pilot scheduler component. We will also cover the monitoring of the health of the system.

Zhao X.; Hover John; Wlodek Tomasz; Wenaus Torre; Frey Jaime; Tannenbaum Todd; Livny Miron

2011-01-01T23:59:59.000Z

497

The particulate and vapor phase components of airborne polyaromatic hydrocarbons (PAHs) in coal gasification pilot plants  

E-Print Network [OSTI]

THE PARTICULATE AND VAPOR PHASE COMPONENTS OF AIRBORNE POLYAROMATIC HYDROCARBONS(PAHs) IN COAL GASIFICATION PILOT PLANTS A Thesis by ERIC JON BRINK Submitted to the Graduate College of Texas A & M University in partial fulfillment... of the requirement for the degree of MASTER OF SCIENCE December 1980 Major Subject: Industrial Hygiene THE PARTICULATE AND VAPOR PHASE COMPONENTS OF AIRBORNE POLYAROMATIC HYDROCARBONS (PAHs) IN COAL GASIFICATION PILOT PLANTS A Thesis by ERIC JON BRINK...

Brink, Eric Jon

1980-01-01T23:59:59.000Z

498

Impact of Pilot Light Modeling on the Predicted Annual Performance of Residential Gas Water Heaters: Preprint  

SciTech Connect (OSTI)

Modeling residential water heaters with dynamic simulation models can provide accurate estimates of their annual energy consumption, if the units? characteristics and use conditions are known. Most gas storage water heaters (GSWHs) include a standing pilot light. It is generally assumed that the pilot light energy will help make up standby losses and have no impact on the predicted annual energy consumption. However, that is not always the case. The gas input rate and conversion efficiency of a pilot light for a GSWH were determined from laboratory data. The data were used in simulations of a typical GSWH with and without a pilot light, for two cases: 1) the GSWH is used alone; and 2) the GSWH is the second tank in a solar water heating (SWH) system. The sensitivity of wasted pilot light energy to annual hot water use, climate, and installation location was examined. The GSWH used alone in unconditioned space in a hot climate had a slight increase in energy consumption. The GSWH with a pilot light used as a backup to an SWH used up to 80% more auxiliary energy than one without in hot, sunny locations, from increased tank losses.

Maguire, J.; Burch, J.

2013-08-01T23:59:59.000Z

499

Waste Isolation Pilot Plant Annual Site Enviromental Report for 2008  

SciTech Connect (OSTI)

The purpose of the Waste Isolation Pilot Plant Annual Site Environmental Report for 2008 (ASER) is to provide information required by U.S. Department of Energy (DOE) Order 231.1A, Environment, Safety, and Health Reporting. Specifically, the ASER presents summary environmental data to characterize site environmental management performance; summarize environmental occurrences and responses reported during the calendar year; confirm compliance with environmental standards and requirements; highlight significant facility programs and efforts; and describe how compliance and environmental improvement is accomplished through the WIPP Environmental Management System (EMS). The DOE Carlsbad Field Office (CBFO) and the management and operating contractor (MOC), Washington TRU Solutions LLC (WTS), maintain and preserve the environmental resources at the Waste Isolation Pilot Plant (WIPP). DOE Order 231.1A; DOE Order 450.1A, Environmental Protection Program; and DOE Order 5400.5, Radiation Protection of the Public and the Environment, require that the affected environment at and near DOE facilities be monitored to ensure the safety and health of the public and workers, and preservation of the environment. This report was prepared in accordance with DOE Order 231.1A, which requires that DOE facilities submit an ASER to the DOE Headquarters Chief Health, Safety, and Security Officer. The WIPP Hazardous Waste Facility Permit (HWFP) Number NM4890139088-TSDF (treatment, storage, and disposal facility) further requires that the ASER be provided to the New Mexico Environment Department (NMED). The WIPP mission is to safely dispose of transuranic (TRU) radioactive waste generated by the production of nuclear weapons and other activities related to the national defense of the United States. In 2008, 5,265 cubic meters (m3) of TRU waste were disposed of at the WIPP facility, including 5,216 m3 of contact-handled (CH) TRU waste and 49 m3 of remote-handled (RH) TRU waste. From the first receipt of waste in March 1999 through the end of 2008, 57,873 m3 of TRU waste had been disposed of at the WIPP facility.

Washington Regulatory and Enviromnetal Services

2009-09-21T23:59:59.000Z

500

Process performance of Ahlstrom Pyroflow PCFB pilot plant  

SciTech Connect (OSTI)

Ahlstrom Pyropower has designed and built a 10 MW{sub th} (34 MMBtu) pressurized circulating fluidized bed (PCFB) pilot plant in Karhula, Finland. The unit is now operating. Data from this unit supports the design of a nominal 80 MW, Des Moines Energy Center 1 (DMEC-1) PCFB Repowering Project. The pilot plant PCFB combustor is of square cross-section. It is housed in a 3.6 m (11.8 ft) diameter pressure vessel. A high pressure high temperature gas cleaning unit downstream of the PCFB exhaust is installed in a separate 2.6 m (8.5 ft) diameter pressure vessel. The maximum plant operating pressure is 16 bar (232 psia). The fuel is fed in slurry form; sorbent is also fed along with the fuel. The net heat input per unit cross section of the combustor is the highest of any known combustion mode. The heat release can go up to 40 MW/m{sup 2} (12.6 MMBtu/ft{sup 2} hr). Many types of coals including high sulfur, bituminous Illinois No. 6 coal and Western sub bituminous, low sulfur Powder River Basin coal were tested. Combustion efficiencies in the range of 99.5 to 99.9% have been consistently observed. Emissions of various gases such as NO{sub x} SO{sub 2} and CO at different operating pressures and loads were monitored. The gas emissions have been lower than expected b